INTRODUCTION
TO THE SERIES
The aim of the Handbooks in Economics series is to produce Handbooks for various branches o...
98 downloads
1646 Views
30MB Size
Report
This content was uploaded by our users and we assume good faith they have the permission to share this book. If you own the copyright to this book and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Start by pressing the button below!
Report copyright / DMCA form
INTRODUCTION
TO THE SERIES
The aim of the Handbooks in Economics series is to produce Handbooks for various branches of economics, each of which is a definitive source, reference, and teaching supplement for use by professional researchers and advanced graduate students. Each Handbook provides self-contained surveys of the current state of a branch of economics in the form of chapters prepared by leading specialists on various aspects of this branch o f economics. These surveys summarize not only received results but also newer developments, from recent journal articles and discussion papers. Some original material is also included, but the main goal is to provide comprehensive and accessible surveys. The Handbooks are intended to provide not only useful reference volumes for professional collections but also possible supplementary readings for advanced courses for graduate students in economics. KENNETH J. ARROW and MICHAEL D. 1NTRILIGATOR
PUBLISHER'S
NOTE
For a complete overview of the Handbooks in Economics Series, please refer to the listing at the end of this volume.
CONTENTS O F T H E HANDBOOK
VOLUME 1A PART 1 - E M P I R I C A L A N D H I S T O R I C A L P E R F O R M A N C E
Chapter 1 Business Cycle Fluctuations in US Macroeconomic Time Series JAMES H. STOCK and MARK W WATSON
Chapter 2 Monetary Policy Shocks: What Have we Learned and to What End? LAWRENCE J. CHRISTIANO, MARTIN EICHENBAUM and CHARLES L. EVANS
Chapter 3 Monetary Policy Regimes and Economic Performance: The Historical Record MICHAEL D. BORDO AND ANNA J. SCHWARTZ
Chapter 4 The New Empirics of Economic Growth STEVEN N. DURLAUF and DANNY T. QUAH PART 2 - M E T H O D S O F D Y N A M I C A N A L Y S I S
Chapter 5 Numerical Solution of Dynamic Economic Models MANUEL S. SANTOS
Chapter 6 Indeterminacy and Sunspots in Macroeconomics JESS BENHABIB and ROGER E.A. FARMER
Chapter 7 Learning Dynamics GEORGE W. EVANS mad SEPPO HONKAPOHJA
Chapter 8 Micro Data and General Equilibrium Models MARTIN BROWNING, LARS PETER HANSEN and JAMES J. HECKMAN
vii
Contents of the Handbook
viii PART 3 - MODELS
OF ECONOMIC
GROWTH
Chapter 9 Neoclassical Growth Theory ROBERT M. SOLOW
Chapter 10 Explaining Cross-Country Income Differences ELLEN R. McGRATTAN and JAMES A. SCHMITZ, Jr. VOLUME
1B
PART 4 - CONSUMPTION
AND INVESTMENT
Chapter 11 Consumption ORAZIO E ATTANASIO
Chapter 12 Aggregate Investment RICARDO J. CABALLERO
Chapter 13 Inventories VALERIE A. RAMEY and KENNETH D. WEST PART 5 - M O D E L S
OF ECONOMIC
FLUCTUATIONS
Chapter 14 Resuscitating Real Business Cycles ROBERT G. KING AND SERGIO T. REBELO
Chapter 15 Staggered Price and Wage Setting in Macroeconomics JOHN B. TAYLOR
Chapter 16 The Cyclical Behavior of Prices and Costs JULIO J. ROTEMBERG and MICHAEL WOODFORD
Chapter 17 Labor-Market Frictions and Employment Fluctuations ROBERT E. HALL
Chapter 18 Job Reallocation, Employment Fluctuations and Unemployment DALE T. MORTENSEN and CHRISTOPHER A. PISSAR/DES
Contents of the Handbook
VOLUME 1C PART 6 - F I N A N C I A L M A R K E T S A N D T H E M A C R O E C O N O M Y
Chapter 19 Asset Prices, Consumption, and the Business Cycle JOHN Y. CAMPBELL
Chapter 20 Human Behavior and the Efficiency of the Financial System ROBERT J. SHILLER
Chapter 21 The Financial Accelerator in a Quantitative Business Cycle Framework BEN S. BERNANKE, MARK GERTLER and SIMON GILCHRIST PART 7 - M O N E T A R Y A N D F I S C A L P O L I C Y
Chapter 22 Political Economics and Macroeconomic Policy TORSTEN PERSSON and GUIDO TABELLINI
Chapter 23 Issues in the Design of Monetary Policy Rules BENNETT T. McCALLUM
Chapter 24 Inflation Stabilization and BOP Crises in Developing Countries GUILLERMO A. CALVO and CARLOS A. VI~GH
Chapter 25 Government Debt DOUGLAS W. ELMENDORF AND N. GREGORY MANKIW
Chapter 26 Optimal Fiscal and Monetary Policy V.V. CHAR/and PATRICK J. KEHOE
ix
PREFACE TO THE HANDBOOK
Purpose The Handbook of Macroeconomics aims to provide a survey of the state of knowledge in the broad area that includes the theories and facts of economic growth and economic fluctuations, as well as the consequences of monetary and fiscal policies for general economic conditions.
Progress in Macroeconomics Macroeconomic issues are central concerns in economics. Hence it is surprising that (with the exception of the subset of these topics addressed in the Handbook of Monetary Economics) no review of this area has been undertaken in the Handbook of Economics series until now. Surprising or not, we find that now is an especially auspicious time to present such a review of the field. Macroeconomics underwent a revolution in the 1970's and 1980's, due to the introduction of the methods of rational expectations, dynamic optimization, and general equilibrium analysis into macroeconomic models, to the development of new theories of economic fluctuations, and to the introduction of sophisticated methods for the analysis of economic time series. These developments were both important and exciting. However, the rapid change in methods and theories led to considerable disagreement, especially in the 1980's, as to whether there was any core of common beliefs, even about the defining problems of the subject, that united macroeconomists any longer. The 1990's have also been exciting, but for a different reason. In our view, the modern methods of analysis have progressed to the point where they are now much better able to address practical or substantive macroeconomic questions - whether traditional, new, empirical, or policy-related. Indeed, we find that it is no longer necessary to choose between more powerful methods and practical policy concerns. We believe that both the progress and the focus on substantive problems has led to a situation in macroeconomics where the area of common ground is considerable, though we cannot yet announce a "new synthesis" that could be endorsed by most scholars working in the field. For this reason, we have organized this Handbook around substantive macroeconomic problems, and not around alternative methodological approaches or schools of thought.
xi
xii
Preface
The extent to which the field has changed over the past decade is considerable, and we think that there is a great need for the survey of the current state ofmacroeconomics that we and the other contributors to this book have attempted here. We hope that the Handbook of Macroeconomics will be useful as a teaching supplement in graduate courses in the field, and also as a reference that will assist researchers in one area of macroeconomics to become better acquainted with developments in other branches of the field. Overview The Handbook of Macroeconomics includes 26 chapters, arranged into seven parts. Part 1 reviews evidence on the Empirical and Historical Performance of the aggregate economy, to provide factual background for the modeling efforts and policy discussion of the remaining chapters. It includes evidence on the character of business fluctuations, on long-run economic growth and the persistence of crosscountry differences in income levels, and on economic performance under alternative policy regimes. Part 2 on Methods of Dynamic Analysis treats several technical issues that arise in the study of economic models which are dynamic and in which agents' expectations about the future are critical to equilibrium determination. These include methods for the calibration and computation of models with intertemporal equilibria, the analysis of the determinacy of equilibria, and the use of "learning" dynamics to consider the stability of such equilibria. These topics are important for economic theory in general, and some are also treated in the Handbook of Mathematical Economics, The Handbook of Econometrics, and the Handbook of Computational Economics, for example, from a somewhat different perspective. Here we emphasize results - such as the problems associated with the calibration of general equilibrium models using microeconomic studies - that have particular application to macroeconomic models. The Handbook then tunas to a review of theoretical models of macroeconomic phenomena. Part 3 reviews Models of Economic Growth, including both the determinants of long-run levels of income per capita and the sources of cross-country income differences. Both "neoclassical" and "endogenous" theories of growth are discussed. Part 4 treats models of Consumption and Investment demand, from the point o f view of intertemporal optimization. Part 5 covers Models of Economic Fluctuations. In the chapters in this part we see a common approach to model formulation and testing, emphasizing intertemporal optimization, quantitative general equilibrium modeling, and the systematic comparison of model predictions with economic time series. This common approach allows for consideration of a variety of views about the ultimate sources of economic fluctuations and of the efficiency of the market mechanisms that amplify and propagate them. Part 6 treats Financial Markets and the Macroeconomy. The chapters in this part consider the relation between financial market developments and aggregate economic
Preface
xiii
activity, both from the point of view of how business fluctuations affect financial markets, and how financial market disturbances affect overall economic activity. These chapters also delve into the question of whether financial market behavior can be understood in terms of the postulates of rational expectations and intertemporal optimization that are used so extensively in modern macroeconomics-an issue of fundamental importance to our subject that can be, and has been, subject to special scrutiny in the area of financial economics because of the unusual quality of available data. Finally, Part 7 reviews a number of Monetary and Fiscal Policy issues. Here we consider both the positive theory (or political economics) of government policymaking and the normative theory. Both the nature of ideal (or second-best) outcomes according to economic theory and the choice of simple rules that may offer practical guidance for policymakers are discussed. Lessons from economic theory and from experience with alternative policy regimes are reviewed. None of the chapters in this part focus entirely on international, or open economy, macroeconomic policies, because many such issues are addressed in the Handbook of International Economics. Nevertheless, open-economy issues cannot be separated from closed-economy issues as the analysis of disinflation policies and currency crises in this part of the Handbook of Maeroeconomics, or the analysis of policy regimes in the Part I of the Handbook of Macroeconomics make clear.
Acknowledgements Our use of the pronoun "we" in this preface should not, of course, be taken to suggest that much, if any, of the credit for what is useful in these volumes is due to the Handbook's editors. We wish to acknowledge the tremendous debt we owe to the authors of the chapters in this Handbook, who not only prepared the individual chapters, but also provided us with much useful advice about the organization of the overall project. We are grateful for their efforts and for their patience with our slow progress toward completion of the Handbook. We hope that they will find that the final product justifies their efforts. We also wish to thank the Federal Reserve Bank of New York, the Federal Reserve Bank of San Francisco, and the Center for Economic Policy Research at Stanford University for financial support for two conferences on "Recent Developments in Macroeconomics" at which drafts of the Handbook chapters were presented and discussed, and especially to Jack Beebe and Rick Mishkin who made these two useful conferences happen. The deadlines, feedback, and commentary at these conferences were essential to the successful completion of the Handbook. We also would like to thank Jean Koentop for managing the manuscript as it neared completion. Stanford, California Princeton, New Jersey
John B. Taylor Michael Woodford
Chapter 11
CONSUMPTION
*
ORAZIO P. ATTANASIO
University College London, Institute for Fiscal Studies and NBER
Contents
Abstract Keywords 1. Introduction 2. Stylised facts
742 742 743 745 746
2.1. Aggregate time series data 2.2. Household consumption expenditure
750
2.2.1. Nature of the data sets and their comparability with the National Account data 2.2.2. Life cycle profiles
3. The life cycle model 3.1. The simple textbook model 3.2. Quadratic preferences, certainty equivalence and the permanent income model 3.3. The Euler equation approach 3.4. Precautionary motives for saving 3.5. Borrowing restrictions 3.6. Taking into account demographics, labour supply and unobserved heterogeneity 3.7. Bequest motives
4. Aggregation issues 4.1. Aggregation across consumers 4.2. Aggregation across commodities
5. Econometric issues and empirical evidence 5.1. Aggregate time series studies 5.2. Micro data: some econometric problems
751 752 760 761 762 765 770 772 777 780
781 781 782 783 784 785
5.2.1. Consistency of estimators derived from Euler equations
785
5.2.2. Average cohort techniques
787
* A preliminary draft of this chapter was presented at a conference at the New York Fed., February 27-28 1997, where I received useful comments from my discussant, Chris Carroll and several participants. Tullio JappeUi provided many careful and insightful comments for which I am very grateful. I would like to thank Margherita Borella for research assistance and James Sefton for providing me with the UK National Accounts Data. Material from the FES made available by the ONS through the ESRC Data Archive has been used by permission of the Controller of HMSO. Neither the ONS nor the ESRC Data Archive bear any responsibility for the analysis or interpretation of the data reported here.
Handbook of Macroeconomics, Volume 1, Edited by J.B. Taylor and M. Woodford © 1999 Elsevier Science B.V. All rights reserved 741
742 5.2.3. Conditional second (and higher) moments 5.3. Micro data: some evidence 6. Where does the life cycle model stand? 7. Insurance and inequality 8. Intertemporal non-separability 8.1. Durables 8.2. Habit formation 9. Conclusions References
O.P. Attanasio 788 789 791 795 798 799 802 804 805
Abstract Consumption is the largest component of GDP. Since the 1950s, the life cycle and the permanent income models have constituted the main analytical tools to the study of consumption behaviour, both at the micro and at the aggregate level. Since the late 1970s the literature has focused on versions of the model that incorporate the hypothesis of Rational Expectations and a rigorous treatment of uncertainty. In this chapter, 1 survey the most recent contribution and assess where the life cycle model stands. My reading of the evidence and of recent developments leads me to stress two points: (i) the model can only be tested and estimated using a flexible specification of preferences and individual level data; (ii) it is possible to construct versions of the model that are not rejected by the data. One of the main problems of the approach used in the literature to estimate preferences is the lack of a 'consumption function'. A challenge for future research is to use preference parameter estimates to construct such functions.
Keywords consumption, life cycle model, household behaviour JEL classification: E2
Ch. 11:
Consumption
743
1. Introduction
In most developed economies, consumption accounts for about two thirds of GDP. Moreover, it is from consumption that, in all likelihood, utility and welfare are in large part determined. It is therefore natural that macroeconomists have devoted a considerable amount of research effort to its study. In modern macroeconomics, consumption is typically viewed as part of a dynamic decision problem. There is therefore another sense in which an tmderstanding of consumption is central for macroeconomics. Consumption decisions are also saving decisions from which the funds available for capital accumulation and investment arise. Therefore, consumers attitudes to saving, risk bearing and uncertainty are crucial to understand the behaviour of capital markets, the process of investment and growth and development. It is not by chance that modern consumption theory is also used to characterise asset prices equilibrium conditions. The desire consumers might have to smooth fluctuations over time determines the need for particular financial instruments or institutions. Understanding recent trends in consumption and saving is crucial to the study, both positive and normative, of the development of financial markets, of the institutions that provide social safety nets, of the systems through which retirement income is provided and so on. One of the main themes of this chapter is that consumption decisions cannot be studied in isolation. Exactly because consumption and saving decisions are part of a dynamic optimisation problem, they are determined jointly with a number of other choices, ranging from labour supply to household formation and fertility decisions, to planned bequests. While modelling all aspects of human economic behaviour simultaneously is probably impossible, it is important to recognise that choices are taken simultaneously and to control for the effects that various aspects of the economic environment in which consumers live might have on any particular choice. This is particularly true if one wants to estimate the parameters that characterise individual preferences. Implicit in this argument is another of the main themes of this chapter: consumption decisions should be modelled within a well specified and coherent optimisation model. Such a model should be flexible and allow for a variety of factors. Indeed, I think it is crucial that the model should be interpreted as an approximation of reality and should allow for a component of behaviour that we are not able to explain. However, such a model is crucial to organise our thinking and our understanding of the data. Without a structural model it is not possible to make any statement about observed behaviour or to evaluate the effect of any proposed change in economic policy. This, however, is not a call for a blind faith in structural models. Inferences should always be conditional on the particular identification restrictions used and on the particular structural model used. Such models should also be as flexible as possible and incorporate as much information about individual behaviour as is available. It should be recognised, however, that without such models we cannot provide more than a statistical description of the data.
744
0.17. Attanasio
The other main theme of the analysis in this chapter is that to understand aggregate trends it is necessary to conduct, in most situations, a detailed analysis of individual behaviour. In other words, aggregation problems are too important to be ignored. This obviously does not mean that the analysis of aggregate time series data is not useful. Indeed, I start the chapter with a brief summary of the main time series properties of consumption. Estimation of structural models of economic behaviour, however, cannot be performed using aggregate data only. This chapter is not an exhaustive survey of the literature on consumption: such a literature has grown so much that it would be hard even to list it, let alone summarise all the contributions. What I offer, instead, is a discussion of the current status of our knowledge, with an eye to what I think are the most interesting directions for future research. In the process of doing so, however, I discuss several of the most important and influential contributions. Omissions and exclusions are unavoidable and should not be read as indicating a negative judgement on a particular contribution. At times, I simply chose, among several contributions, those that most suited my arguments and helped me the most to make a given point. Moreover, notwithstanding the length of the chapter, not every sub-fields and interesting topic has been covered. But a line had to be drawn at some point. There are four fields that I did not included in the chapter and over which I have agonised considerably. The first is asset pricing: while much of the theoretical material I present has direct implications for asset prices, I decided to omit a discussion of these implications as there is an entire chapter of this Handbook devoted to these issues. The second is the axiomatisations of behaviour under uncertainty alternative to expected utility. There are several interesting developments, including some that have been used in consumption and asset pricing theory, such as the KrepsPorteus axiomatisation used by Epstein and Zin (1989, 1991) in some fascinating papers. The third is the consideration of within-household allocation of resources. There is some exciting research being developed in this area, but I decided to draw the line of 'macro' at the level of the individual household. Finally, I do not discuss theories of consumption and saving behaviour that do not assume optimising and fully rational behaviour. Again, there is some exciting work in the area of social norms, mental accounting, time varying preferences, herd behaviour and so on. In the end, however, I decided that it would not fit with the rest of the chapter and rather than giving just a nod to this growing part of the literature I decided to leave it out completely. The chapter is organised as follows. In Section 2, I start with a brief description of some stylised facts about consumption. These include both facts derived from aggregate time series data and from household level data. Throughout the section, I use in parallel data from two countries: the USA and the UK. In Section 3, I discuss at length what I think is the most important model of consumption behaviour we have, the life cycle model. In that section, I take a wide view of what I mean by the life cycle model: definitely not the simple textbook version according to which the main motivation for saving is the accumulation of resources to provide for retirement. Instead, I favour a flexible version of the model where demographics, labour supply, uncertainty and precautionary saving and possibly
Ch. 11: Consumption
745
bequests play an important role. In other words, I consider the life cycle model as a model in which consumption decisions are determined within an intertemporal optimisation framework. What elements of this model turn out ot be more important is largely an empirical matter. Indeed, even the presence of liquidity constraints, or borrowing restrictions, can and should be incorporated within this framework. In Section 4, I discuss aggregation problems. In particular, I focus on two different kinds of aggregation: that across consumers and that across commodities. The aim of this section is not just to give lip service to the aggregation issues and proceed to sweep them under the carpet. With the development of computing and storage capability and with the availability of increasing large number of micro data sets, it is important to stress that scientific research on consumption behaviour cannot afford to ignore aggregation issues. In Section 5, I consider the empirical evidence on the life cycle model and discuss both evidence from aggregate time series data and evidence from micro data. In this section I also address a number of econometric problems with the analysis of Euler equations for consumption. In Section 6, I take stock on what I think is the status of the life cycle model, given the evidence presented in Section 5. In Section 7, I address the issues of insurance and inequality. In particular, I present some of the tests of the presence of perfect insurance and discuss the little evidence there is on the evolution o f consumption inequality and its relationship to earning inequality. Most of the models considered up to this point assume time separability of preferences. While such a hypothesis is greatly convenient from an analytical point of view, it is easy to think of situations in which it is violated. In Section 8, I discuss to forms of time dependence: that induced by the durability of commodities and habit formation. Section 9 concludes the chapter.
2. Stylised facts In this section, I document the main stylised facts about consumption behaviour using both aggregate and individual data. I consider two components of consumption expenditure: on non-durable and services and on durables. In addition I also consider disposable income. While most of the facts presented here are quite well established, the evidence in this section constitute the background against which one should set the theoretical model considered in the rest of the chapter. The data used come from two western countries: the United States and the United Kingdom. I have deliberately excluded from the analysis developing or less developed countries as they involve an additional set of issues which are not part of the present discussion. Among the developed countries I have chosen the USA and the UK both because data from these two countries have been among the most widely studied and because the two countries have the best micro data on household consumption. For
O.P. Attanasio
746
4000
UK USA - disposable income and consumption ~------150000 100000
2000
-
disposable income and consumption
50000
J J
97.1
2319 55
6's
75
as
&
65
75
85
95
Fig. 1. Disposable income (top curve) consumption, divided into durables (bottom curve) and nondurables (middle curve).
the UK, in particular, the Family Expenditure Survey runs for 25 consecutive years, giving the possibility of performing interesting exercises. 2.1. Aggregate time series data In this section, I present some of the time series properties of consumption expenditure and of disposable income. While the models considered in the following sections refer to household behaviour, typically the consumption aggregates considered in the National Account statistics include outlays of a sector that, together with households, includes other entities, such as charities, whose behaviour is unlikely to be determined by utility maximisation. While this issue is certainly important, especially for structural tests of theoretical models of household behaviour, in the analysis that follows I ignore it and, instead of isolating the part of total expenditure to be attributed to households, I present the time series properties of National Account consumption. Seslnick (1994) has recently stressed the importance of these issues. In Figure 1, I plot household (log) disposable income along with consumption divided into durables and non-durables and services for the UK and the USA. The series have quarterly frequency and run from 1959:1 to 1996:3 for the USA and from 1965:1 to 1996:2 for the UK. The data are at constant prices and are seasonally adjusted. From the figure, it is evident that non-durable consumption is smoother than disposable income. Durable consumption, on the other hand, which over the sample accounts, on average, for 13% of total consumption in the USA and around 14% in the UK, is by far the most volatile of the three time series. This is even more evident in Figure 2 where I plot the annual rate of changes for the three variables. In Table 1, I report the mean and standard deviation of the three variables. These figures confirm and quantify the differences in the variability of the three variables considered. In Tables 2 and 3, I consider two alternative ways of summarising the time series properties of the three series I analyse for both countries. In Table 2, 1 report the estimates of the coefficient of an MA(12) model for the same series. The advantage of such an un-parsimonious model is that it avoids the sometimes difficult choice among competing ARMA representations. Furthermore, its impulse response function
Ch. 11:
747
Consumption
USA- disposable income and consumption rates of growth
UK- disposable income and consumptionrates of growth
0.2
0.2
0.1
0.1
0
0
-0.1
-0.1
-0.2
-0.2
55
65
75
85
95
65
75
85
95
Fig. 2. Annual rates of change for the variables of Figure 1. Table 1 Mean and standard deviations (annual rates of growth) US
Disposable income Nondurable consumption Durable expenditure
UK
Mean
St. dev.
Mean
St. dev.
0.032 0.023 0.048
0.025 0.018 0.069
0.026 0.017 0.043
0.026 0.021 0.112
can be easily read from the estimated coefficients. I also purposely decided to be agnostic about the presence o f random walks in the time series consumption or income, even though this has implications for the so called 'excess smoothness' puzzle briefly discussed below. In Table 3, instead, I report the M a x i m u m Likelihood estimates o f a parsimonious A R M A m o d e l for the first differences o f the log o f the three variables. While in some cases there were alternative specifications that fitted the data as well as those reported in the table, the latter all pass several diagnostic tests. The Q-statistics reported in the table indicates that the representations chosen capture adequately the dynamic behaviour o f the series over the period considered. The time series properties o f the rate o f growth o f the three variables are remarkably different. Notice, in particular, the fact that both in the U K and in the USA, the sum o f the M A coefficients for non-durable consumption is positive, while that for durables is negative. The time series properties o f non-durable consumption differ remarkably: in Table 2 the sum o f the first 12 M A coefficient is much larger in the U K than in the USA. Furthermore, while the US data are well represented by an M A ( 3 ) (with the first and third lag large and very strongly significant), the U K require an AR(2) model 1.
I The presence of an MA(3) effect in the non-durable series for the USA is evident even in the MA(12) representation but it is not very robust. If one truncates the sample to 1990 or dummies out the few quarters corresponding to the 1990-91 recession, 03 is estimated non-significantly different from zero
748
O.P Attanasio
Table 2 MA(12) representation a US
0i
01 02 03 04 05 06 07 08 09 010 011 012
~ ) 2 I 0i
UK
Disposable income
Non-durable consumption
Durable consumption
Disposable income
Non-durable consumption
Durable consumption
-0.30 (0.091) 0.15 (0.094) 0.092 (0.094) -0.092 (0.088) -0.15 (0.087) 0.11 (0.088) -0.13 (0.087) -0.17 (0.088) 0.38 (0.088) 0.20 (0.095) -0.06 (0.096) -0.27 (0.091) -0.25
0.41 (0.096) 0.18 (0.103) 0.43 (0.104) 0.12 (0.110) -0.057 (0.108) 0.100 (0.108) 0.11 (0.107) -0.20 (0.107) 0.05 (0.109) -0.03 (0.100) 0.05 (0.099) 0.08 (0.092) 1.23
-0.092 (0.088) -0.035 (0.089) 0.063 (0.089) 0.084 (0.086) -0.16 (0.085) 0.15 (0.077) -0.45 (0.077) -0.021 (0.085) -0.23 (0.085) -0.03 (0.088) 0.005 (0.087) -0.23 (0.086) -0.95
-0.10 (0.094) 0.12 (0.095) -0.06 (0.092) -0.18 (0.088) -0.19 (0.089) 0.22 (0.088) 0.21 (0.088) 0.14 (0.087) -0.14 (0.086) -0.20 (0.087) 0.05 (0.088) -0.05 (0.086) -0.18
0.005 (0.094) 0.20 (0.093) 0.004 (0.093) 0.28 (0.092) 0.19 (0.093) 0.19 (0.094) 0.09 (0.094) 0.22 (0.092) -0.11 (0.090) 0.23 (0.091) 0.18 (0.091) 0.03 (0.093) 1.51
-0.29 (0.094) -0.14 (0.096) 0.24 (0.097) -0.45 (0.099) 0.15 (0.106) 0.05 (0.107) -0.07 (0.106) -0.18 (0.104) -0.08 (0.098) 0.02 (0.095) -0.20 (0.094) -0.02 (0.089) -0.97
a Standard errors are given in parentheses. The sum o f the M A coefficients for disposable income in both countries is quite small in absolute value, but is positive in the U S A and negative for the UK. As far as a 'parsimonious' specification is concerned, in the U S A I chose an MA(1) for the first differences, even though its coefficient is not very large and is statistically insignificant. This model was almost indistinguishable from an AR(1) model. In the UK, the best model for disposable income is an ARMA(1,1). The richer dynamics o f the U K series is also evident in the pattern o f the M A coefficients in Table 2.
both in the MA(12) and in the MA(3) model. The same result is obtained if one excludes services from this series.
Ch. 11:
749
Consumption
Table 3 ARMA representation a Variable
US Disposable income
'[Pl
--
--
'10 2
--
_
01
-0.19 (0.088)
0 2
--
03
-
UK
Non-durable D u r a b l e Disposable Non-durable Durable consumption consumption income consumption consumption -0.103 (0.089)
-0.77 (0.293) -
0.684 (0.339)
0.38 (0.083) 0.18
0.015 (0.087) 0.28 (0.087) -
-1.09 (0.098) -0.45 (0.082) 0.85 (0.077)
-
0.85 (0.077) 7.22 (0.30)
(0.088)
Q-stat (p-value)
13.40 (0.10)
0.39 (0.082) 7.35 (0.28)
-
10.09 (0.26)
0.684 (0.339) 11.79 (0.11)
11.49 (0.12)
a Sample 1965:3-1996:3 (125 observations). Standard errors are given in brackets. The properties of durable consumption are particularly interesting. The fact that the time series properties are inconsistent with a simple model which adds durability to the standard random walk property derived from some version o f the permanent income has been noticed by Mankiw (1982). Such a model would imply an MA(1) model for the changes in expenditure with a coefficient that would differ from minus one by an amount equivalent to the depreciation rate. As can be seen from Table 2, the US series' best representation is indeed an MA(1) with a negative coefficient; but that coefficient is far from minus one 2. Caballero (1990b) has interpreted this and the fact that, as reported in Table 3 :for b0th~eountries, the sum o f the 12 M A coeflici~fits is negative and much larger in absolute value, as an indication o f the presence of inertial behaviour that 'slows down' the process o f adjustment o f durables. Having characterised the main time series properties o f consumption and income, the next step would be the estimation of a multivariate time series model that would stress the correlations among the variables considered at various leads and lags. Indeed, some of the studies I cite below, such as Flavin (1981), do exactly this with the purpose of testing some of the implications o f the life cycle-permanent income hypothesis. For the sake of brevity, I omit the characterisation o f the multivariate time series process o f consumption and other macro variables. One of the reasons for this omission is the belief, discussed below, that aggregation problems make it very difficult to give
2 For durable consumption in the UK, the best model is an ARMA(2,1), by far the most complex model I fitted to these data.
750
0.17 Attanasio
structural interpretation to this type of results. This does not mean, however, that aggregate time series studies are not useful. The careful specification of a flexible time series model for consumption and other variables can be quite informative, especially if the dynamic specification allows for the type of dynamic effects implied by the microeconomic behaviour. Several of the studies by David Hendry and his collaborators are in this spirit; one of the most widely cited examples of this literature is the paper by Davidson et al. (1978). The approach taken in these papers, which received a further motivation by the development of cointegration techniques, is to estimate a stable error correction model which relates consumption to other variables. The statistical model then allows to identify both short run and long run relationships between consumption and its determinants. While the theory can be informative on the choice of the relevant variables and even on the construction of the data series, it does not provide explicit and tight restrictions on the parameters of the model. A good example of a creative and informative use of this type of techniques is Blinder and Deaton (1985). While it is difficult to relate this type of models to structural models and therefore they cannot be directly used for evaluating economic policy, they constitute useful instruments for summarising the main features of the data and, if used carefully, for forecasting. Often the lack of micro economic data makes the use of aggregate time series data a necessity. The only caveat is that these studies cannot be used to identify structural parameters.
2.2. Household consumption expenditure In this section, I use two large microeconomic data set to document the main stylised facts about consumption. The two data sets used are the US Consumption Expenditure Survey (CEX) and the UK Family Expenditure Survey (FES). Both data sets are run on a continuous basis to gather information for the construction of the weights for the CPI (RPI in the UK). They have, however, been extensively used by researchers and have now become an essential tool to study household consumption and saving behaviour. The focus of the analysis is going to be the household. No attempt will be made to attribute consumption to the single household members, even though some (limited) information on this does exist 3. Most of the descriptive analysis presented below attempts at describing the main features of the life cycle profile for consumption expenditure and some other variables.
3 Both data sets containvery detailed information on the expenditure on individual commodities. Some of this information can be used to attribute some items to some household members. For many items, however, such attribution is difficult both in practice and conceptually. Browning (1987) has imputed expenditure on alcoholand tobaccoto the adults to checkwhether predictedchangesin householdincome and composition(such as the arrival of children with consequent- at least temporary- withdrawal from the labour force of the wife) cause changes in consumption. Gokhale, Kotlikoffand Sabelhaus (1996) in their study of saving behaviourhave attempted to impute all of consumptionto the individual household members.
Ch. 11: Consumption
751
This approach reflects the fact that the theoretical discussion in the next sections will be focused around the life cycle model.
2.2.1. Nature of the data sets and their comparability with the National Account data The FES is now available for 25 consecutive years. Each year around 7000 households are interviewed and supply information on their consumption patterns as well as their demographic characteristics and several other economic variables such as employment status, income, education and so on. Each household stays in the sample for two weeks, during which it fills a diary in which all expenditure items are reported. At the end o f the two week period an interviewer collects the diaries and asks additional information on durables acquired during the previous three months and on all major expenditure items reported in the diary and periodic expenditures such as utilities. The CEX is available on a continuous and roughly homogeneous basis since 1980. Each year about 7000 different households are interviewed for 4 subsequent interviews, with quarterly frequency 4. Each month new households enter the survey to replace those that have completed their cycle o f interviews. During each interview the household is asked to report expenditure on about 500 consumption categories during each o f the three months preceding the interview 5. The panel dimension of the CEX is unfortunately very short: because each household is only interviewed four times, seasonal variability is likely to dominate life cycle and business cycle movements. In what follows, I do not exploit the panel dimension o f the survey. There have been several discussions about the quality o f survey data and the importance o f measurement error and about their ability to reproduce movements in aggregate consumption. Several studies, both in the U S A and the UK, have addressed the issue 6. It should be stressed that the aggregated individual data and the National Account aggregate should be expected to differ for several reasons. First o f all, for many consumption categories, the definitions used in the surveys and in the National Accounts are quite different. Housing, for instance, includes imputed rents in the National Accounts data but does not in the surveys. In the CEX, health expenditure
4 In total there are data for over 20000 interviews per year. Each household is in fact interviewed five times. However, the Bureau for Labor Statistics does not release information on the first (contact interview). The Bureau of Labor Statistics also rtms a separate survey based on diaries which collects information on food consumption and 'frequently purchased items'. s Unfortunately,the monthly decomposition of the quarterly expenditure is not very reliable. For several commodities and for many households, the quarterly figure is simply divided by three. Given the rotating nature of the sample, the 'quarters' of expenditure do not coincide perfectly. For instance, somebody interviewed in December will report consumption in September, October and November, while somebody interviewed in November will report consumption in August, September and October. 6 See, for instance, Seslnick (1992) and Paulin et al. (1990) for comparisons between the aggregate Personal Consumption Expenditure and the CEX in the USA and the papers in Banks and Johnson (1997) for comparisons on the FES and the UK National Accounts.
752
O.P. Attanasio
measures only out-of-pocket expenditures, while~ the National Accounts definition includes all health expenditures regardless o f the payee. Furthermore, the populations of reference are quite different. Surveys, for instance, do not include institutionalised individuals, while the National Accounts do. Finally, National Account data arc not exempt from measurement error that, for some items, can be quite substantial. Should major difference emerge, it is not obvious that the National Account data should be considered as being closer to the 'truth'. The issues that arise are different for the two data sets. Overall, the degree o f correspondence between the aggregated individual data and the National Account data seems to be higher in the UK. For most consumption components, aggregating the FES data, one obtains about 90% o f the corresponding National Accounts figure, while the same ratio is about 65% for the CEX in the 1980s. This is probably due to the use o f diaries rather than recall interviews. The latter, perhaps not surprisingly, tend to underestimate consumption. In both surveys, however, because o f the consistent methodology used over time, there is no major trend in the ratio o f the aggregated individual data to the corresponding National Accounts aggregates 7. Furthermore, the dynamics o f consumption and income growth and o f saving in both the aggregated CEX and FES data do not track the corresponding macroeconomic aggregates badly. The data are therefore not only useful to characterise individual behaviour and its shifts over time, but also to make inferences, based on individual behaviour, about possible explanations o f the observed macroeconomic trends.
2.2.2. Life cycle profiles In the second part o f the chapter, in which I discuss the main theoretical model o f consumption behaviour, a substantial amount o f attention is devoted to the life cycle model in its several incarnations. In this section, I present life cycle profiles for consumption, its components and various other variables in the USA and the UK. In this sense, the life cycle model is the conceptual framework that I use to organise the presentation of the microeconomic data. As the data sets I use are not panels, to estimate age profiles, I am forced to use grouping techniques. These techniques were first used within life cycle models by Browning, Deaton and Irish (1985)8. The idea is quite simple. Rather than following the same individual over time, one can follow tile average behaviour o f a group of
7 There are substantial differences in this ratio between the early CEX surveys (1960-61 and 1972-73) and those of the 1980s, probably due to the differences in the methodology employed. In the FES the one commodity for which a (downward) trend in the ratio is apparent is tobacco. 8 Ghez and Becker (1975) use observations on individual of different ages to study life cycle behaviour. However, as they use a single cross section, they do not control for cohort effects as Browning et al. (1985) do. Deaton (1985) and, more recently, Moffitt (1993) have studied some of the econometric problems connected with the use of average cohort techniques. Heck~manand Robb (1987), MaCurdy and Mroz (1989) and Attanasio (1994) discuss identification issues.
Ch. 11:
Consumption
753
individuals as they age. Groups can be defined in different ways, as long as the membership o f the group is constant over time 9. Within the life cycle framework, the natural group to consider is a 'cohort', that is individuals (household heads) born in the same period. Therefore, to compute the life cycle profile o f a given variable, say log consumption, one splits the households interviewed in each individual cross section in groups defined on the basis o f the household head's year o f birth. This involves, for instance, considering all the individuals aged between 20 and 24 in 1980, those aged between 21 and 25 in 1981 and so on to form the first cohort; those aged between 25 and 29 in 1980, between 26 and 30 in 1981 and so on to form the second cohort, etc. Having formed these groups in each year in which the survey is available, one can average log consumption and therefore form pseudo panels: the resulting data will have dimension Q x T, where Q is the number o f groups (cohorts) formed and T is the number o f time periods m. Even if the individuals used to compute the means in each year are not the same, they belong to the same group (however defined) and one can therefore study the dynamic behaviour o f the average variables. Notice that non-linear transformations o f the variables do not constitute a problem as they can be computed before averaging. The resulting age profiles will not cover the entire life cycle o f a given cohort, unless the available sample period is longer than any o f the micro data set commonly used. Each cohort will be observed over a (different) portion o f its life cycle. These techniques can be and have been used both for descriptive analysis and for estimating structural models. Their big advantage is that they allow to study the dynamic behaviour o f the variables o f interest even in the absence o f panel data. Indeed, in many respects, their use might be superior to that o f panel data ~1. Furthermore, as non-linear transformations o f the data can be handled directly when forming the group means, they allow one to solve various aggregation problems that plague the study o f structural models with aggregate time series data. In what follows, I define groups on the basis o f the year o f birth and educational attainment o f the household head. The length o f the interval that defines a birth
9 Group membership should be fixed over time so that the sample is drawn from the same population and the sample mean is a consistent estimator of the mean of the same population. Attanasio and Hoynes (1995) discuss the implications of differential mortality for the use of average cohort techniques. Other possible problems arise, at the beginning of the life cycle, from the possible endogeneity of household formation and, more generally, from migration. ~0 Here I am implicitly assuming that the pseudo panel is a balanced one. This is not always the case as each group might be observed for a different number of time periods. Suppose, for instance, to have data from 1968 to 1994. One might want to follow the cohort born between 1965 and 1970 only from the late 1980s or the early 1990. On the other hand, at some point during the 1980s one might want to drop the cohort born between 1906 and 1910. l~ Time series of cross sections are probably less affected by non-random attrition than panel data. Furthermore, in many situation, averaging across the individuals belonging to a group can eliminate measurement error and purely idiosyncratic factors which are not necessarily of interest. As most grouping techniques, average cohort analysis has an Instrumental Variable interpretation.
O.P. Attanasio
754 Table 4 Cohort definition and cell size Cohort
Year of birth
Cell size US Average size
Years in sample
Averagesize
UK Years in sample
1
1895-1999
-
-
338
1968-1977
2
1900-1904
-
-
459
1968-1982
3
1905-1909
-
-
526
1968-1987
4
1910-1914
232
1980-1992
560
1968-1992
5
1915-1919
390
1980-1992
519
1968-1992
6
1920-1924
333
1980-1992
653
1968-1992
7
1925-1929
325
1980-1992
572
1968-1992
8
1930-1934
317
1980-1992
546
1968-1992
9
1935-1939
345
1980-1992
562
1968-1992
10
1940-1944
420
1980-1992
594
1968-1992
11
1945-1949
566
1980-1992
652
1968-1992
12
1950-1954
657
1980-1992
547
1971-1992
13
1955-1959
734
1980-1992
508
1976-1992
14
1960-1964
-
-
463
1981-1992
15
1965 1969
-
-
334
1986-1992
cohort is chosen taking into account the trade-off between cell size and within-cell homogeneity. Table 4 contains the definition o f the cohorts and the average sample size for both surveys. We start, in Figures 3 and 4, with the life cycle profile of (log) consumption and disposable income at constant prices for both countries. The units o f measurement for income and consumption are chosen so that the two graphs would be roughly in the same scale, enabling to stress the differences in the shape of the age profile. In the figures, I plot the average cohort (log) consumption at each point in time, against the median age o f the household head. Each connected segment represent the behaviour o f a cohort, observed as it ages, at different points in time. As each cohort is defined by a five year interval, and both surveys cover a period longer than five years, at most ages we observe more than one cohort, obviously in different years. It might be tempting to attribute the differences between adjacent cohorts observed at the same age, to 'cohort effects'. It should be remembered, however, that these observations refer to different time periods and might therefore be reflecting business cycle effects. The plotted profiles reflect age, time and cohort effects 12 that, without
12 As well as measurement error and small sample variability.
755
Ch. 11." Consumption USA - disposableincome
UK - disposable income
25000
~'250 200
20000 150 15000
O
lOO 8 50
10000 20
40
Age
60
70
20
40
Age
60
70
60
70
Fig. 3. USA - total consumption 25000
~
20000
UK - total consumption 250
~
~2o0 "~150
~o
o
&loo
15000
05
8
10000
0 20
40
Age
60
70
50 20
40
Age
Fig. 4. an arbitrary normalisation or additional information from a structural model, cannot be disentangled. Several considerations are in order. First of all, both consumption and income age profiles present a characteristic 'hump'. They both peak in the mid 40s and decline afterwards. The picture seems, at first glance, to contradict the implications of the life cycle model as stressed in the typical textbook picture which draws a 'hump shaped' income profile and a flat consumption profile. For total disposable income, the decline around retirement age is faster in the UK than in the USA, but approximately of the same magnitude. This probably reflects the more synehronised retirement of British individuals. The consumption profiles, however, present some strong differences. The most notable is the fact that UK consumption declines much more at retirement than US consumption. Total consumption at age 70 is roughly 35% of the peak in the UK and above 50% in the USA. I discuss the decline of consumption at retirement below. In the UK consumption profile, the consumption boom of the late 1980s, followed by the bust of the early 1990s, is quite apparent. Notice, in particular, the fact that the aggregate consumption boom is accounted for mainly by the youngest cohorts. I have discussed elsewhere how to interpret that episode. It is worth stressing, however, that the analysis of the cross sectional variability of consumption can be useful to shed some light on the nature of episodes that the analysis of the time series data cannot
0.17. Attanasio
756 Table 5 Variability of consumption and income Standard error (%)
Variable
Total consumption Total consumption per adult equivalent Non-durable consumption Non-durable consumption per adult equivalent Durable consumption Non-durable consumption (from levels) Income
USA (CEX)
UK (FES); age < 81
UK (FES); 10 cohorts, year < 86
2.94 2.39 2.60 1.95 15.79 2.58 3.68
2.46
2.65
2.62 2.30 2.49 9.54
2.64 1.88 2.05 8.54
2.31 3.05
1.86 3.60
explain. Information about which groups in the populations where mainly responsible for a determinate episode can be informative about alternative hypotheses 13 It is not obvious how to assess the time series volatility o f (log) consumption and income. The main reason for this is that a large part o f the variation o f consumption over the life cycle is very predictable and can be explained by age and cohort effects. Furthermore, given the limited size o f our samples, the year to year variation in the average cohort data reflects both genuine time series variation and the measurement error induced by sample variation. As Deaton (1985) has stressed, some information about the size o f the measurement error can be gained using the within-cell variability o f the variables used. Using this information, one might correct for that part o f variability accounted for by sampling variation and attempt to isolate the genuine time variation. In an attempt to isolate this component, I run a regression o f log consumption and income on a fifth order polynomial in age and cohort dummies and consider the deviations o f the observed profiles from such a profile. The standard deviation o f the changes in these deviations, corrected for that part which can be attributed to sampling error, is my measure o f time variability 54. These estimates o f volatility for (log) income and consumption are reported in Table 5 along with those for the other variables considered. The first column refers to the USA, while the second and third columns are computed using the U K data. The former includes the whole sample,
i3 See Attanasio and Weber (1994). Groups do not need to be formed on the basis of age. In Attanasio and Banks (1997) that analysis is extended considering not only the variability across cohorts but also across regions. 14 The sample mean • is distributed around the population mean as a random variable with variance given by o2/N, where N is the cell size and cr is the within-cell variance. The latter can be estimated from the available micro data. These estimates can be used to correct our estimates of volatility.
Ch. 11:
Consumption
757 UK - non-durable consumption per household and per adult equivalent
USA - non-durable consumption per household and per adult equivalent ~"
15000
200-
10000 100E
8
5000 20
40
Age
60
70
5020
40
Age
60
70
Fig. 5.
while the latter truncates it to 1986 to remove the effect of the consumption 'boom and bust' of the last part of the sample. As in the case of aggregate time series, total consumption appears less volatile than disposable income, both in the UK and in the USA. In particular, the standard deviation of changes in total disposable income at the cohort level is above 3% in both countries. That of total consumption is between 0.6% and 0.95% less. It may be argued that the differences in the consumption profiles for the two countries are due to the differences in the definitions used in the two surveys. For this reason, I next focus on a narrower definition of consumption which excludes a number of items which might be recorded in different fashion in the two countries. In particular, in Figure 5 I plot (log) expenditure on non-durables and services against age. This definition excludes from total consumption durables, housing, health and education expenditure. The other advantage of considering consumption of non-durables and services, is that I avoid the issue of durability and the more complicated dynamics that is linked to durables. The main features of the two profiles, however, including the larger decline observed in the UK, are largely unaffected. In Table 5, the volatility of non-durable consumption is considerably less than that of total consumption, especially in the UK when data up to 1986 are used. An important possible explanation for the life cycle variation of consumption over the life cycle (and between the two countries considered), is the variation in needs linked to changes in family size and composition. To control for this possibility, I have deflated total household expenditure by the number of adult equivalents in the household. For such a purpose, I use the OECD adult equivalence scale 15. The most evident result is that the life cycle profile of consumption looks much flatter now. In this sense, we can say that a large proportion of the variability of consumption over the life cycle is accounted for by changes in needs. This result is perhaps not surprising
15 No adult equivalence scale is perfect. Different alternatives, however, do not make much difference for the point I want to make here. The OECD scale gives weight 1 to the first adult, 0.67 to the following adults and weight 0.43 to each child below 19.
O.P. Attanasio
758 USA - durables
UK - durables
5000-
4000-
looo-
30002000
8
1000-
~0
4o
6o
~0
Age
~0
40
6'o
8S
1;0
Age
Fig. 6. if one considers that the life cycle profile of the number of adult equivalents (or of family size) is also 'hump-shaped'. It may be argued that changes in needs are, to a large extent, predictable. In terms o f the measure o f volatility in Table 5, it is greatly reduced for the USA, while is slightly increased for the UK. While the profile for non-durable consumption per adult equivalent is quite flat in the first part of the life cycle, a marked decline is still noticeable in the last part. It seems that the decline corresponds roughly to the time of retirement. In the UK, where retirement is much more synchronised than in the USA, the decline is much more rapid. The fact that per adult equivalent consumption declines with retirement suggests that this might be due to a link between labour market status and consumption. A possibility, for instance, is that some components of consumption are linked to labour market participation. More generally, it is possible that consumption and leisure are non-separable and, therefore, need to be analysed jointly. These issues have been recently discussed by Banks et al. (1998). Finally, it is of some interest to consider the life cycle profile of expenditure on durables. The life cycle profiles for durables are plotted in Figure 6. Consistently with the findings in aggregate time series data, the life cycle profiles for durable expenditure are much more volatile than those for non-durables and services. The measure in Table 5 for durables is 5 times as large as that o f total consumption for the USA and almost 4 times as large for the U K 16. Several variables are likely to be important determinants of, or determined jointly with consumption. I have already stressed the important role which is likely to be played by demographics and retirement behaviour in shaping the life cycle profiles o f consumption. Similar considerations can be made for other labour supply variables
16 Because durable expenditure can be zero at the individual level I do not compute the average of the log. Therefore, the deviations from the life cycle profiles are not percentage deviations, but are measured in constant dollars. Because of this, in Table 5, in the row corresponding to durables I report the coefficient of variation, rather than the standard deviation. For comparison, I adopt the same procedure for non-durable consumption, in the following row.
Ch. 11:
Consumption
759
such as the participation rate of females to the labour market and the total number of hours of work. A characterisation of the life cycle patterns of these variables and their differences between the U K and the USA would go beyond the scope of this section 17. However, it is important to stress that, as I argue in Section 5 and 6 below, one cannot test any model of consumption without controlling for these factors, that, for the most part, can only be analysed using household level data. In Table 5, I only report the variability of the various components of consumption and of disposable income. As with the aggregate time series data, it would be interesting to characterise the autocorrelation properties of these variables and their covariances. This analysis could be quite informative about the plausibility of alternative structural models 18. One of the implications of the textbook version of the life cycle model I discuss in Section 3, is that consumption and current income should not be related. And yet, comparing Figures 3 and 4, one cannot help noticing the similarity in the shape of the two life cycle profiles. This similarity was interpreted as a failure of the life cycle model by Thurow (1969) and reinterpreted in terms of non-separability of consumption and leisure by Heckman (1974). To pursue this issue, in Figure 7, I plot the life cycle profile of (log) disposable income and non-durable consumption for four education groups in the USA defined on the basis of the educational attainment of the household head: high school dropouts, high school graduates, some college and college graduates. An interesting feature of this figure is that the differences across groups in the shape of the income profiles are mirrored in differences in the consumption profiles. In particular, notice that both income and consumption profile of better educated individuals present a more pronounced hump; not only are their income and consumption higher, but the profiles are also much steeper in the first part of the life cycle. These differences where interpreted within a life cycle model by Ghez and Becker (1975), but have interpreted as a failure of the model by Carroll and Summers (1991) in an influential paper. An interesting question, addressed below, is whether a version of the life cycle model I discuss could generate these profile and account for the differences across education groups. In Table 6, I compute the variability of income, consumption and its components as in Table 5, but splitting the sample by education. The most interesting feature of this table is the fact that the only large difference in volatility among the groups is in durable consumption. Expenditures on durables by high school dropouts is twice as variable as that of college graduates, while the figure for high school graduates is in the middle. 17 Interested readers can find the life cycle profiles for several variables in Attanasio (1994), Banks, Blundell and Preston (1994) and Attanasio and Banks (1997). a8 MaCurdy (1983) and Abowd and Card (1989) perform analyses of these kinds for earnings and hours of work and use the results to assess the plausibility of different structural model. No similar analysis exists for consumption and/or its components.
O.P. Attanasio
760 log i n c o m e a n d n o n d u r a b l e c o n s u m p t i o n by e d u c a t i o n high school graduates
high school dropouts
40000l 30000
20000
-°°°°l 10000
3--~
5459.04
I
i
some college
i
i
college graduates
30000
20000
10000
5459,04
q
20
910
410
50
age
Fig. 7. Table 6 Variability of consumption and income by educational group Variable
Standard error (%) High school dropouts High school graduates Morethan high school
Total consumption Non-durable consumption Durable consumption Income
2.88 2.40 22.85 5.98
2.74 2.93 16.58 6.53
2.88 2.25 9.66 5.17
3. The life cycle model In this and in the next few sections, I will sketch what 1 think is the most important model of intertemporal consumption behaviour: the life cycle-permanent income model. In doing so, I take a fairly wide definition of the model: I consider a very general framework in which consumption (and saving) decisions are taken as a part of an intertemporal decision process. This general definition includes both the initial formulations of the life cycle and permanent income models and more recent and sophisticated developments, such as the precautionary saving model or the bequest motive. While the emphasis given to various aspects of the problem is different in the various incarnations of the general model I will consider, they have in common the hypothesis that consumption decisions are taken by a decision unit that
Ch. 11: Consumption
761
maximises utility over time. The various versions of the model will then differ for their assumptions about optimisation horizon, uncertainty, curvature of the utility function, assumptions about separability and so on. Which of these various versions is the most relevant is in part a matter of taste and, above all, an empirical matter. 3.1. The simple textbook model
The main attractiveness of the life cycle-permanent income model, developed during the 1950s in a number o f seminal contributions 19, is the fact that consumption decisions are treated as part of an intertemporal allocation problem. The allocation of consumption over time is treated in a fashion similar to the allocation of total expenditure among different commodities in demand analysis. The model recognises, therefore, that intertemporal prices and the total amount of resources available to an individual are bound to be important determinants of consumption. This approach immediately gives the study of consumption solid microfoundations and constitutes a discontinuous jump with respect to the Keynesian consumption function which assumed consumption to be a simple function of current disposable income. The main difference between the life cycle and the permanent income model in their original formulation lies in the time horizon considered. The life cycle model is, almost by definition, a finite horizon model, while in the permanent income model the horizon is infinite. In both cases, however, consumers decide how much to consume keeping in mind their future prospects. If no uncertainty is introduced in the model, its predictions are quite straightforward: concavity of the utility function implies a desire to smooth consumption over time; the main motivation for saving is to smooth out fluctuations in income; consumption increases with current income only if that increase is a permanent one. In the case of the life cycle model, the explicit consideration of retirement, that is a period in which income declines considerably, generates the main motivation for saving: households accumulate wealth to provide for their consumption during retirement. An interesting implication of the life cycle model in its simplest incarnation is the way in which aggregate saving is generated. It is quite obvious that in a stationary life cycle economy with no growth aggregate saving is zero: the younger generations will be accumulating wealth, while the older ones will be decumulating it. Aggregate saving, however, can be generated in the presence of growth. I f the amount of resources available over the life cycle to younger generations is larger than that available to older ones, it is possible that the amount accumulated at a point in time exceeds the amount that is decumulated. This introduces a relationship between aggregate saving and growth that Modigliani has stressed in several studies. It should be stressed, however, that such a relationship depends on a number of factors including the life
19 Modiglianiand Brumberg(1954) contains the first formulation of the life cycle model. The permanent income model was sketched in Milton Friedman's 1957 volume [Friedman (1957)].
762
O.P. Attanasio
cycle profile, the way in which growth is generated and who benefits from it and so on.
The life cycle-permanent income models were developed to provide an answer to several needs. First, by framing consumption decision within an intertemporal problem, immediately introduces dynamics into the picture. This gives the possibility of fitting some of the empirical facts that seemed at odd with the Keynesian consumption function 20, such as the difference between average and marginal propensity to consume in the short and long run. In addition, the introduction of dynamics is obtained in a theoretically consistent fashion which is appealing to economists. The model gives an obvious explanation of the smoothness of consumption relative to disposable income linked to some well defined preference parameter (the concavity of the utility function). Obviously, the first empirical applications of the model were quite different from the studies of the last 20 years, mainly for the much more sophisticated treatment of uncertainty which I discuss below 21. The model, however, seemed to score a number of empirical successes. I have already mentioned the fact that the model accounts for differences between short run and long run responses of aggregate consumption to disposable income (or other variables). More generally, it was clear that the model was able to generate very rich dynamic patterns for aggregate consumption and its response to disposable income. It could also explain the relationship between consumption and wealth and provide a rationale for the relationship between wealth-income ratios and growth. Indeed, as Modigliani has pointed out, the simplest version of the model is capable to generate an aggregate wealth to income ratio of 5 which is close to what this number is for the USA. Furthermore, the model also seemed able to explain some of the regularities observed in cross sectional data. Just to mention one, Friedman showed how the permanent income model can explain the fact that black households seem to save, at each level of income, a larger fraction of their income than white households 22.
3.2. Quadratic preferences, certainty equivalence and the permanent income model One of the problems with the life cycle-permanent income model is that the dynamic problems that consumers are assumed to solve can be quite complex. As a
20 Carroll and Kimball (1996) provide quotes from Keynes' General Theory in which he suggested a concave consumptionfimction. 21 Friedman(1957) essentially approximatedpermanent income with a distributed lag of current income. Modigliani and Ando (1963) stressed the role played by wealth (in addition to disposable income) in aggregate consumptionequations. Both the Modigliani and Ando paper and Friedman's book contained interesting discussions of the aggregationproblems that were absent, for a long time, from subsequent empirical studies. 22 This fact is still true: data from the Consumer Expenditure Surveyfrom 1980 to 1992 confirm that the saving rates of household headed by a black are systematicallyhigher, for any interval of income, than those of household headed by a non-black.
Ch. 11:
Consumption
763
consequence, if one considers an uncertain environment, unless strong assumptions about the nature of uncertainty and preferences are made it is not possible to obtain a closed form solution for consumption. A popular parametrization of the model which can yield an analytical solution is that of intertemporally separable and quadratic preferences. Indeed, a large part of the profession has come to identify the 'permanent income model' with such a parametrization of preferences with the additional assumptions of infinite horizon, constant interest rates and stochastic labour income. The analysis of the model is greatly simplified by the linearity of the marginal utility of consumption. This, and the fact that the only uncertainty comes from labour income, allows the derivation of an analytical solution for consumption which depends only on the first moment of future labour income. In particular, under the assumptions listed in the previous paragraph, consumption at time t can be expressed as a simple fimction of 'permanent income': Ct = kY p,
(1)
where k= 1 if the (fixed) interest rate equals the subjective discount factor, and permanent income YP is defined as
j=0 (1 +r)J where r is the fixed interest rate, ;~=r/(1 +r), At is the value of current wealth, and y is disposable labour income. The main attraction of Equations (1) and (2) is that they provide a straightforward relationship between the stochastic process that generates income and consumption. These relationship give rise to a number of testable implications that have been studied at length in the literature. Flavin (1981) and Sargent (1978) were the first studies to exploit the fact that Equations (1) and (2), together with the hypothesis that expectations about future labour income are rational, imply cross equation restrictions on the bivariate VAR representation of consumption and disposable income. Flavin (1981), in particular, estimated such a system using US time series data and rejected the restrictions implied by Equations (1) and (2). Flavin finds some evidence of excess sensitivity of consumption to income. Campbell (1987) proposes a slightly different interpretation of Flavin's results. From Equations (1) and (2) it is possible to obtain the following expression for saving 23: OO
st = )~ ~ j-0
EtYt+j -Yt (1 + r)J
(3)
23 s on the left-hand side of Equation (9) coincideswith saving (i.e. income minus consumption),only when k in Equation (7) is equal to 1. Otherwise,s = y - c/k.
764
0.17. Attanasio
The restrictions implied by Equation (3) are the same as those implied by Equations (1) and (2). The nice thing about Equation (3), however, is its interpretation. The fact that consumers smooth consumption over time is reflected in Equation (3) in the fact that saving anticipates expected decline in disposable income. It is for this reason that Equation (3) has been dubbed as the 'saving for a rainy day' equation. Formally, the implication of Equation (3) can be written as saying that actual saving should equal the best forecast of labour income declines. Consistently with Flavin's findings, Campbell (1987) rejects the implications of the model. Campbell, however, finds that the time series pattern of actual saving is not far from that implied by the model. He claims that excess sensitivity of consumption to income within this framework "is more naturally interpreted as insufficient variability of saving than as a correlation between changes in consumption and lagged changes in income" (p. 1272). Related to the tests of excess sensitivity discussed above, and using the same framework, are those papers discussing the issue of 'excess smoothness' of consumption. Campbell and Deaton (1989) were the first to stress that, because Equations (1) and (2) can be used to derive the relationship between changes in consumption and innovations to the process generating income, the relationship between the volatility of consumption (or permanent income) and that of current income depends on the stochastic properties of the process generating the latter. In particular, if labour income is difference stationary (rather than trend stationary), permanent income, and therefore consumption, will be more volatile than current income. Intuitively, this result follows the fact that if labour income is not stationary, current innovations are persistent and will therefore imply a permanent revision to permanent income. Therefore the observation that consumption growth is less volatile than current disposable income growth contradicts the permanent income hypothesis 24. This result is ironic as one of the original motivations for the development of the permanent income model was, indeed, the observation that consumption is smoother than income. The most problematic issue with this branch of the literature is the well known difficulty in distinguishing between trend stationary and difference stationary models 25. The version of the model with quadratic preferences has also been used to introduce further refinements to the model. Goodfriend (1992) and Pischke (1995), for instance, consider the implications of the lack of complete information on contemporaneous aggregate variables. Pischke, in particular, explains the excess sensitivity results typically obtained with aggregate data with this type of phenomena 26. In a recent paper, Blundell and Preston (1998) use the assumption of quadratic preferences to devise a clever way of decomposing transitory and permanent components of income shocks. The idea is quite simple: under the permanent income
24 For a clear discussion of these issues see chapters 3 and 4 in Deaton (1992). 25 See, for instance, Christiano and Eichenbaum(1990) 26 Deaton(1992) also discusses the possibilitythat the informationset used by individual agents differs from that available to the econometrician.
Ch. 11:
Consumption
765
model, consumption should react to innovations to permanent income and not to transitory income. Consumption variability can therefore be used to isolate that part of the observed volatility of income which is to be attributed to permanent shocks.
3.3. The Euler equation approach Without the assumption of quadratic utility (and of uncertainty confined to the exogenous income process), one is left with the problem that it is not possible to derive an analytical solution for the level of consumption. The most important theoretical development since the development of the life cyclepermanent income model is the rigorous treatment o f uncertainty introduced in the late 1970s, after the rational expectations revolution in macroeconomics. In a famous paper, Hall (1978) used what is the main implication of the intertemporal optimisation problem faced by a generic consumer to derive empirically testable restrictions that have been at the centre of much of the empirical analysis in the last 20 years. The idea is simple and elegant: in a situation in which consumers maximise expected utility under uncertainty, they act so to keep the expected (discounted) marginal utility of consumption constant. This condition is equivalent to the equalisation of the marginal rate of substitution to relative prices in consumer demand. The beauty of the approach lies in the way in which the difficulties associated with the presence of uncertainty are circumvented. The effect of future variables on consumption at a given point in time is summarised by the multiplier associated to the budget constraint: the marginal utility of wealth. This object is eliminated by considering the equations for two different periods and considering the optimal pattern for the evolution of the multipliers. It is now time to introduce a bit of notation and formalise what said so far. Suppose a consumer maximises expected life time utility subject to an intertemporal budget constraint. She consumes a homogeneous consumption good C, receives labour income y and has the possibility of investing in N different assets A i that pay a rate of return R I at the end of period t. Both rates of returns and labour income are uncertain. This setup is formalised in the following equation: T-t
max Et ~
fiJ U(Ct~j, zt+j, vt+j)
j-0
(4) N
subject to Z i-1
N
A~+j+, = Z AI+J(1 + RJ+t)+Yt+i-Ct+J ' i=l
where I allow the instantaneous utility function U to depend on a vector of observable variables z, and an unobservable variable v. The operator Et denotes expectations conditional on the information available at time t. I omit an index for the individual for notational simplicity. Implicit in Equation (4) are a number of simplifying assumptions of various nature that will be relaxed in the following sections. It is useful to list some of them along with ways in which they can be rationalised.
766
o.P. Attanasio
(i)
Equation (4) assumes that utility is separable over time. This is a strong assumption and rules out at least two important phenomena: habit formation and durable commodities. The marginal utility o f consumption in any given time period does not depend on consumption expenditure in any other period. We also assume that expenditure coincides with consumption. One obvious possibility to rationalise this model without excluding the existence o f durables is to assume that the instantaneous utility function is additively separable in non-durables and in the services provided by durables. In this case, a term for expenditure on durables should be added to the intertemporal budget constraint. (ii) Utility is derived from an homogeneous consumption good. The conditions under which intertemporal choices can be summarised by a single price index are seldom discussed. The two situations that are treatable are the absence o f changes in relative prices, so that one can construct a Hicks composite commodity, or that preferences take the Gorman polar form. These issues are discussed below. (iii) Labour income is exogenous. No labour supply choices are considered. One can reconcile a situation in which labour supply is endogenous with the model discussed above, assuming that the instantaneous utility function is additively separable in leisure and consumption. In this case, one should modify only the budget constraint o f the problem (4) above. (iv) The duration o f life is certain. This assumption is easily relaxed to assume an uncertain life time. Davies (1981) has shown that this equivalent to assuming a discount factor fi that varies with age as a consequence of a varying probability o f survival. Utility at future ages is discounted not only because it accrues in the future but also because its accrual is uncertain. I will not discuss this issue any further, except when I discuss some o f the issues relevant for the analysis of consumption based on numerical methods. (v) The rate o f return on assets does not depend on the net position on that asset or on the total level o f wealth held by the consumer. The model, however, can easily accommodate a situation in which several assets are subject to various kinds of constraints, as long as there is at least one asset in which is possible to borrow and lend at the same rate 27 (vi) For simplicity, I have not considered explicitly the presence o f inflation. Obviously the presence of (uncertain) absolute price changes is simply accommodated in the model above by changing appropriately the budget constraint and the definition o f interest rates. Under these assumptions it is possible to derive an extremely useful first-order condition for the intertemporal maximisation problem described above. I f we denote
27 This is the condition under which the first-order condition derived below holds. If the rate of return on a given asset changes with the net position in that asset in a continuous and differentiable fashion, that is if the intertemporal budget constraint is concave and does not present kinks, the first-order condition derived below can be easily modified. More complicated is the situation in which there are discontinuities and kinks for all assets at some level of net worth (for instance zero).
Ch. 11: Consumption
767
with )~t the multiplier associated to the intertemporal budget constraint at time t, it can be shown that two of the first-order conditions for the problem in Equation (4) are
OU(Ct, zt, 03 OCt
(5)
-- i~t,
)~t = Et D~t+x/3(1 +R~+,)] ,
i= l,...,m.
(6)
Equation (6) holds for the m (m ~
i = 1,...,m,
(7)
where Uc is the derivative of the instantaneous utility function with respect to consumption. It is Equation (7) that Hall (1978) used to derive his famous 'random walk' property of consumption. These can be derived for the level of consumption if utility is assumed to be quadratic, or, under some distributional assumptions, for its log if utility is isoelastic. Notice that I have allowed instantaneous utility to depend on a number of observable variables (the vector z) for which I have not specified any property. Such variables could in principle be choice variables determined in the same intertemporal maximisation problem. Indeed, the variables z constitute the vehicle through which I introduce a number of factors such as the effect of demographics or of labour supply. As long as we control for their effect on the marginal utility of consumption (and treat them as endogenous at the estimation level), I do not need to model them explicitly. It should be stressed that Equation (7) is not a consumption function, but only an equilibrium relationship that can be used (and has been used) to estimate structural (behavioural) parameters and/or to test some of the implications of the model. The big advantage of Equation (7) is the elimination of the term that represents the marginal utility of wealth and therefore the necessity of explicitly modelling the way in which the distribution of future variables influences consumption choices. The price of this simplification, however, is not a small one: we lose the ability to say anything about the levels of consumption. While it is true that given the level of current consumption, we can use Equation (7) to forecast the expected level of future consumption, we do not
28 MaCurdy (1981) uses this frameworkto construct his 'A-constant' labour supply function.
0.17. Attanasio
768
know how consumption reacts to unexpected changes in the economic environment. These include changes to taxes or any other policy instruments that might affect consumption decisions. The elimination of the tmobservable marginal utility of wealth is similar to the elimination by quasi differencing of fixed effects in econometrics. The problem here is that the 'fixed effect' that is differenced out is one of great importance. Hall (1978) used quadratic utility to derive his famous 'random walk' result. After his paper, several studies developed and used the Euler equation approach with different assumptions about preferences. Hansen and Singleton (1982), for example, used isoelastic preferences to derive an expression whose parameters they estimated by GMM on aggregate time series data for consumption and several rates of return. In particular, Equation (7) with isoelastic preferences (and neglecting the z and v variables) implies c t-Y+l
The assumption of rational expectations and the fact that expectations in Equation (8) are conditional to the information available at time t can be used to find valid instruments to identify the structural parameters of Equation (8), which, once again, can be considered for several rates of returns. If we denote with q the dimension of the vector of parameters [in Equation (8), q = 2], with m the assets for which (8) holds and with k the number of instruments considered, Equation (8) yields m k - q overidentifying restrictions that can be used to test the model. The results obtained by Hansen and Singleton on aggregate data indicate that the model is strongly rejected whenever several returns are considered simultaneously. On the other hand, when one asset is considered in isolation, the overidentifying restrictions are not violated, but the preference parameters are estimated at somewhat implausible values. Hansen and Singleton (1983) considered a log-linear version of Equation (8). If one assumes that the rate of returns and consumption growth are joint log-normal, from Equation (8) one can derive the following expression: Alog(Ct+l) = 1 [log/3 + g2vart(Alog(Ct+l )) + vart (log(1 + Rit+l)) (9) +2Cov(Alog(Ct+l), log(1 +R)+I))] +
log(1 +Rt+l) ) + et+l,
where et+l is an expectational error uncorrelated with all the information available at time t. The advantages of Equation (9) are that it is (log) linear and some of its coefficients, as the one on the interest rate, have a natural and interesting interpretation. When the utility function in Equation (4) is isoelastic, its curvature parameter y plays a double rote. On the one hand it is equal to the coefficient of relative risk aversion and therefore summarises consumer's attitude towards risk. On the other,
Ch. 11:
Consumption
769
its reciprocal is equal to the elasticity o f intertemporal substitution and therefore measures as consumption growth changes when the relative price o f present and future consumption changes 29. The linearity of Equation (9) allowed a number o f researchers to estimate it by linear instrumental variables methods. Valid instruments include, as before, any information available to consumers at time t - 1. Hall (1988), however, noted that if the frequency with which consumption decisions are taken is higher than the frequency o f observations, the residuals o f equations will not be uncorrelated over time, as implied by the assumption o f rational expectations, but have, under certain assumptions, an MA(1) structure with a positive coefficient. If this is the case, valid instruments will be any variable dated t - 2 or earlier. The choice of lagged two instruments has become the common practice for the studies who estimate versions o f Equation (9) using aggregate time series data 3°. Most empirical applications that used a version o f Equation (9), including Hansen and Singleton (1983), typically assume that the conditional second moments that appear on its right hand side are constant over time so that they can be estimated as an intercept term. I discuss the role o f the conditional variances in Section 5. For the time being it will suffice to notice that assumption o f constant second moments can be relaxed to the weaker one that the innovations to the second moments in Equation (9) are uncorrelated with the instruments used in estimating the equation. Having found the instruments that allow the (over) identification o f the parameters o f Equation (9), it is possible to estimate its parameters and test the model. Alternatively, it is possible to test for the significance of additional variables that might be o f particular interest and that, according to the simplest versions o f the model, should not appear in the equation. A test which has received considerable attention is the addition o f the expected value o f current labour income growth. One o f the main examples o f this approach, is a series o f papers by Campbell and Mankiw (1989, 1991) who have estimated on aggregate time series data an equation like the following: Alog(Ct+l) = a + ort+l + )~Alog(yt+l) + et+l,
(10)
where y is labour income and r an interest rate. Both o f the variables on the right hand side are instrumented. According to the model the parameter )~ should be zero and the residual term should be orthogonal to the information available at time t. Equations (8) and (9) illustrate one of the main advantages o f the Euler equation approach. Even if it is not possible to obtain a closed form solution for consumption, it
29 For a discussion of the interpretation of such a parameter and the links between intertemporal substitution and risk aversion see Hall (1988), Attanasio and Weber (1989) and Epstein and Zin (1989, 1991). 3o Carroll et al. (1994) argue for the explicit consideration of the MA(1) process that would allow the use of the orthogonality conditions with instruments dated t - 1 and therefore yield more precise estimates and more powerful tests.
770
O.P.Attanasio
is possible to consider equilibrium relationships that can be used to estimate structural parameters. While these, as I discuss below, are not sufficient to answer many important policy questions, they constitute a basic ingredient of any answer. Furthermore, the orthogonality restrictions implied by the equations (and the assumption of rational expectations) can be used to test the validity of the model. Finally, the model can encompass a number of features that make it quite realistic without loosing its empirical tractability. In particular, it is possible to consider the effects that variables such as durables, labour supply, children and so on have on the marginal utility of non-durable consumption without having to model explicitly these variables. Having said this, however, one should also stress that the empirical implementation of the Euler equation is not without problems. First of all, data requirements can be quite formidable. Furthermore, a number of subtle econometric problems needs to be considered. I discuss these problems and some o f the available empirical evidence in Section 5.
3.4. Precautionary motives for saoing The assumption of quadratic preferences, which makes it possible to derive a closed form solution for consumption, is not very appealing. In addition to various shortcomings of quadratic preferences, many would find certainty equivalence, i.e. what makes the model easy to handle, questionable. It is therefore not surprising that a large literature has developed in the attempt to go beyond quadratic preferences. The first paper to consider explicitly the effects of non-linear marginal utility is Dreze and Modigliani (1972). While the Dreze and Modigliani contribution focuses on a two period problem, it contains many of the insights of the precautionary saving literature, such as the fact that the importance of the precautionary motive for saving depends on the third derivative of the utility function. Kimball (1990) discusses within a rigorous framework the conditions under which one can expect to observe precautionary savings. In particular, he proves that precautionary saving will occur when the utility function exhibits 'prudence', that is when the 3rd derivative of the utility function is positive. Under a CRRA utility function this will always be the case. To see this it is sufficient to consider Equation (6) above, that is the log-linearization of the Euler equation under the assumption of lognormally distributed random variables 31. Notice that, keeping the other variables constant, an increase in the conditional variance of consumption increases, at time t, the expected rate of growth of consumption between t and t + 1. This can be achieved by decreasing consumption at t, that is increasing saving at t. It is this that is usually referred to as precautionary
31 Alternatively, an equation similar to Equation (6) can be obtained by a Taylor expansion of the marginal rate of substitution, as in Dynan (1993). Banks, Blundell and Brugiavini (1997) use an approximation of the Euler equation developedby Blundell and Stoker (1999).
Ch. 11:
Consumption
771
motive for saving. As Browning and Lusardi (1996) stress, the fact that the effect that the conditional variance has on the rate of growth of consumption is scaled by the coefficient of relative risk aversion is an artefact of the CRRA utility function in which a single parameter controls both risk aversion and prudence (as well as the elasticity of intertemporal substitution). More generally, Carroll and Kimball (1996) have proved the concavity of the consumption function under precautionary saving. It should be noticed that the variance of consumption is not an exogenous variable. While it is likely to depend on the overall uncertainty facing the consumer, it is not obvious how it reacts to the arrival of new information or how it is related to uncertainty in income and interest rates. To evaluate this relationship it would be necessary to solve for the level of consumption and establish how consumption at t+l reacts to changes in the economic environment which, under CRRA preferences, is not possible. Caballero (1990a,b, 1991) using the exponential utility function as a parametrization of within-period utility obtains, with some additional assumptions, a closed form solution for consumption. In an interesting example, he expresses consumption as a function of permanent income (as in the case of certainty equivalence), minus a term which summarises the effect of the precautionary motive. He then goes on to evaluate the effect that precautionary saving is likely to have in reality. While the results obtained with the exponential utility give useful insights about the potential importance of the precautionary motive, such a parametrization of the utility function is not exempt from criticism. It is therefore important to evaluate the importance of precautionary saving using more general functional forms for the utility function. Unfortunately, when one uses different utility functions is not possible to obtain a closed form solution for consumption. It is therefore necessary to use numerical methods to obtain solutions and additional assumptions about the nature of the problem faced by consumers. This is the approach taken in a number of studies, such as those of Skinner (1988), Zeldes (1989b), Deaton (1991), Carroll (1994) and Hubbard, Skinner and Zeldes (1994, 1995). A disturbing feature of these studies is that the quantitative importance of the precautionary motive depends crucially on the properties of the distribution of the income process in the left tail. Bounding away the income process from zero (or from arbitrarily small realisations) greatly reduces the precautionary motive. While the reason for this is clear (consumers will want to insure themselves against disastrous events), the realism of such a mechanism is questionable. It might be worth investigating how the precautionary motive would change in the presence of insurance mechanisms other than self insurance (such as a safety net supplied either by society or by family and relations). Carroll (1994, 1997a) has strongly advocated the precautionary saving motive (or 'buffer stock saving') as an explanation of most empirical puzzles in consumption, including the tracking of expected consumption and income. I discuss the empirical findings on the precautionary motive and more generally on the Euler equation in Section 5. From a theoretical point of view, however, it should be stressed that while the
772
O.P Attanasio
precautionary motive is likely to be important for impatient consumers and especially in the early part of the life cycle, it is also clear that if retirement savings become, at some point during the life cycle, important, they can be used to buffer unexpected fluctuations to income. This effect, however, can be limited if most retirement wealth is held in the form of claims to future benefit or in other illiquid assets (such as special retirement accounts, housing, social security etc.). The relevance of the precautionary saving motive is ultimately an empirical matter, as it depends on preference parameters, on the features of the individual income process and on the availability of safety nets and insurance mechanisms. An attractive possibility to test the relevance of the precautionary motive for saving is to relate observed saving behaviour to perceived uncertainty. Guiso, Jappelli and Terlizzese (1992) is the only paper that uses direct observations on the perceived variance of the income process to assess the importance of precautionary savings. They use a unique data set (the Bank of Italy Survey of Household Income and Wealth) in which individuals are asked not only about their income expectations, but about the complete probability distribution of future income 32. This allows the authors to compute individual variances, which they then relate to individual savings, finding some mild evidence of precautionary savings. One obvious problem with this approach is the possibility that the individuals who have selected themselves into riskier occupation are less risk averse and, maybe, less 'prudent'. A similar argument was used by Skinner (1988) to justify his finding that self-employed individuals seem to save less than the average. More recently, Guiso, Jappelti and Terlizzese (1996) have studied the implications of the precautionary motive for portfolio composition. They show that, in the presence of different and unrelated sources of risk, individuals with higher and undiversifiable earning uncertainty will tend to invest in relatively 'safer' portfolios. 3.5. Borrowing restrictions
Related to the issue of precautionary saving is that of the presence of borrowing constraints. The standard model sketched above assumes that individuals can borrow against future labour income to finance current consumption at the same rate at which they can lend. Of course, if this is not the case, the basic model has to be amended in that the maximisation problem in Equation (4) has to take into account the additional constraint. It has now become customary to interpret evidence of 'excess sensitivity' of consumption growth to labour income as an indication of 'liquidity constraints', by which it is usually meant the presence of some imperfection in financial markets that prevents people from borrowing. However, there is no reason to believe that liquidity constrained individuals consume their disposable income. Only when the constraints are actually binding will this
32 Individuals are asked to divide 100 probabilitypoints over several intervals of income growth.
Ch. 11:
ConsumpHon
773
occur. Therefore, excess sensitivity tests and, more generally, Euler equations are not the best way to identify the presence o f liquidity constraints. Furthermore, as we discuss below, there are several reasons why predicted income and consmnption might be related that have nothing to do with the presence of liquidity constraints. With these considerations, I do not want to dismiss the possibility of liquidity constraints as unimportant or unrealistic 33. Especially for some groups in the populations, they might be quite relevant and have an important effect on aggregate consumption. Early contributions to the literature on the policy implications of the permanent income-life cycle models, such as the papers by Flemming (1973) and Tobin and Dolde (1971), were quite aware of the importance o f liquidity constraints. It is crucial, however, that the presence o f liquidity constraints is incorporated in the optimising framework sketched above. The definition o f liquidity constraints I use in what follows appeal to partial equilibrium considerations: the interest rate schedule is taken as given. General equilibrium considerations, however, even though they are rarely made, can be quite important. In a world o f identical consumers, the possibility o f smoothing consumption over time will be constrained by the technology available to transfer resources over time. In equilibrium, interest rates and asset prices will adjust depending on the demand for borrowing (saving) and on the available technology. In such a situation, nobody is liquidity constrained at the current interest rates. With heterogeneous consumers, it is possible that some will want to borrow and others will be saving. The equilibrium interest rates will then reflect these factors. While the focus o f most o f the considerations in this section is on the partial equilibrium effects, it is worth keeping in mind that aggregate fluctuations, for instance a recession, might have effects on asset prices that reduce the demand for loans relative to what would be observed under constant interest rates. The first step in the integration of borrowing restrictions in the model above must be their exact definition. There are several possibilities. The first and most general alternative is to allow the interest rate paid on assets to depend on the net asset position. As a simple example o f this alternative, consider the possibility o f a difference between borrowing and lending rate. Such a wedge induces a kink in the intertemporal budget constraint. One can then consider Euler equations for individuals who are net borrower and net savers: the interest rate relevant for the two groups will be different, but the Euler equation still holds as an equality. For the individuals that will cluster at zero net assets, however, the Euler equation (with either interest rate) holds as an inequality.
33 As Hayashi (1996) stresses, most specifications of preference implicitly imply a form of borrowing restrictions. If the marginal utility of consumption is infinite a zero consumption, consumers will not want to borrow more than the present discounted value of the minimum realisation of income, even though the probability of this event is very low. This is because they want to avoid the possibility of zero consumption even with a very small probability.
O.P. Attanasio
774
It is also possible that the interest rate varies continuously with the quantity borrowed or saved. I f that is the case, at any point in which the function is differentiable, it is still possible to write down an Euler equation which, relative to Equation (8), contains an additional term referring to the derivative of the interest rate with respect to the asset position 34:
OAf ,'/3
(l +
Et
= 1
(al)
At those points of the intertemporal budget constraint where the interest rate changes discontinuously (such as zero), Equation (11) will be replaced by an inequality. An alternative to the consideration of interest rates varying with the amount borrowed (or saved) is the assumption that individuals face a limit to the amount they can borrow (which can be zero). Obviously this can be interpreted as a case o f the previous situation, with the borrowing rate being infinite at the limit. Even in this case, however, there are several alternatives. It is possible, for instance, that the limit an individual can borrow is not fixed but a function of some variables which, in turn, can be endogenous 35. Finally, it is possible to consider the existence of collateralizable loans. When liquidity constraints take the form of a limit to borrowing, it is still possible to write the Euler equation for consumption, as long as the constraint is not binding. When it is binding, instead, the Euler equation will hold as an inequality, or as an equality with the addition of a slack variable (a Kuhn-Tucker multiplier). Equation (8) becomes E,
[ C'+Yl(1
]
= 1 +~tt,
(12)
where #t is an unobservable Kuhn-Tucker multiplier associated to the borrowing restriction. If instead of considering a homogeneous consumption good, one considers several commodities explicitly, assuming that none of them is durable or can be used as a collateral, for each of these commodities it is possible to obtain an equation of the following form: OU( ) _ ,~,p~ + ~,,
where At is the marginal utility of wealth and Pl is the relative price of commodity i. Notice that gt appears in the first-order conditions for all commodities, so that any
34 A paper which contains this type of analysis is Pissarides (1978). 35 Alessie et al, (1989) and Weber (1993) consider the possibility that the limit to borrowing is a function of earnings.
Ch. 11:
Consumption
775
two of these equations can be used to eliminate it. This implies that the intratemporal first-order conditions hold regardless of the presence of liquidity. Meghir and Weber (1996) used this intuition to distinguish between liquidity constraints and intertemporal dependence in preferences. They consider three different non-durable commodities and stress that the presence of dynamic effects in the Euler equation can be rationalised with intertemporal non-separabilities only if the same dynamic effects are found in the intratemporal first-order conditions. On the contrary, if one finds that the intratemporal conditions do not show any sign of dynamic effects while these appear in the Euler equations, one should interpret this evidence as a sign of binding liquidity constraints. Some studies have explored the possibility that some commodities, such as durables, can be used as collateral to relax the severity of borrowing restrictions. Because durables can be used as collateral, when liquidity constraints are binding, they become relatively more attractive than non-durables. This fact has implications for the withinperiod allocation of resources between durables and non-durable consumption. In the absence of liquidity constraints, this would depend only on the relative price and on their marginal rate of substitution (where the relevant price for durables would be their user cost). In the presence of liquidity constraints, however, an additional term has to be added to the first-order condition to reflect the fact that it is possible to use durables to borrow against future resources. Therefore, as Chah, Ramey and Starr (1995), Brugiavini and Weber (1994) and Alessie, Devereux and Weber (1997) have noted, the possibility of using durables as collateral and the presence of liquidity constraints distorts the intratemporal allocation of resources between durables and nondurables. At several points in the discussion so far ! have stressed that even when liquidity constraints are present, if they are not binding, the Euler Equation (8) will hold. Therefore, such an equation and the mis-specification tests conducted on it (such as tests of 'excess sensitivity') are likely to be a poor tool to identify the presence of borrowing restrictions. In addition to the power considerations just made, in what follows I also stress that evidence on excess sensitivity can often be interpreted as evidence of non-separability between consumption and leisure. The fact that the Euler Equation (8) holds whenever the borrowing restrictions are not binding does not mean that these constraints have no effect on the level of consumption. Indeed, as discussed clearly by Hayashi (1987), the presence of potential liquidity constraints has the same effect as that of a shortening of the horizon relevant for current choices. Alternatively, one can interpret the presence of liquidity constraints (when they are not binding) as an increase in the discount factor. From a policy perspective, liquidity constraints are important because of their effect on the level of consumption, rather than on its changes. In other words, what matters is how consumption reacts to unexpected changes in the economic environment (including policy changes). Euler equations are not informative about this. Deaton (1991) provides one of the first analysis of the effect of liquidity constraints on the level of consumption. By solving the Euler equation numerically, he shows that the behaviour induced by the presence of liquidity constraints is similar to that
776
O.R Attanasio
associated with a precautionary motive for saving. As in the precautionary motive for saving, people will accumulate a buffer stock to avoid the possibility of needing a loan that they cannot obtain. Furthermore, the liquidity constraint will be binding only occasionally as during most periods, individuals avoid, by their optimal behaviour, to find themselves constrained. For liquidity constraints (or precautionary saving) to be relevant for individual behaviour, it is necessary that the households concerned want to borrow, that is they face an increasing income path and are impatient enough to -want to bring resources from the future to the present. Even in such a situation, however, it is not necessary that the Euler equation restrictions are violated. If one rules out the possibility of dying in debt and considers finite lives and a marginal utility of consumption that goes to infinity when consumption goes to zero, it is possible that 'liquidity constraints' are generated endogenously by the model. In particular, to avoid the possibility of having zero resources (and therefore zero consumption) in the last period of life, individuals will not want to borrow any amount in excess of what they can repay with probability one. Notice that in such a situation, consumption in any two periods satisfies the Euler
equation 36. From a theoretical point of view, the considerations above indicate that a profitable research strategy is one which aims at characterising the response of consumption to various news when liquidity constraints are relevant (regardless of whether they are binding). Deaton (1991) constitutes a first important step in this direction. On a more specific level, the analysis in Hubbard, Skinner and Zeldes (1994, 1995) constitutes another good example of how a consistent theoretical model incorporating borrowing restrictions can be used and be informative about important policy issues 37 Several other interesting problems remain to be modelled and understood. If labour supply choices are endogenous, the presence of liquidity constraints might induce female labour force participation. These effects might be strengthened if the ability to borrow is linked to earnings 38. All these issues are examples of the need to be able to use the model to make statements about consumption levels that I discuss again below. Identifying the presence and the relevance of borrowing restrictions is not easy. One possibility is to use direct questions on the matter. Jappelli (1990) used this strategy and analysed the answers to some questions contained in the Survey of Consumer Finances in the USA. The households interviewed in 1983 were asked whether they were denied credit or whether they did not applied because they felt they would be denied. The main problem with this research strategy is that very few household surveys contain questions similar to those analysed by Jappelli.
36 This point was also noted in Hayashi (1987). 37 Jappelli and Pagano (1994) eharaeterisethe link between liquidityconstraints, saving and growth. 38 See O'Brien and Hawley(1986).
Ch. 11: Consumption
777
The presence of (binding) liquidity constraints has some direct implications for the demand for loans. Its analysis constitute therefore an interesting possibility for the identification of borrowing restriction and for evaluating their importance. If consumers are subject to binding borrowing restrictions they will be at a kink (or in a relatively steep section) of an intertemporal budget constraint. Their demand for loans, therefore, will not be much affected by changes in the interest rate. On the contrary, if consulners are not at a corner (or in a relatively fiat part of the budget constraint) their demand for loans will be elastic to the interest rate. The effects of maturity, however, should be opposite. A consumer who is not affected by borrowing restrictions will be indifferent to changes in maturity. On the other hand, a constrained consumer, for whom an increase in maturity will effectively increase his ability to borrow by reducing the size of the payments to maturity, will increase its demand for loan. Juster and Shay (1964) were the first to use this intuition using semi-experimental data. They asked a sample of consumers whether they would finance the hypothetical purchase of an automobile when faced with different packages of interest rates and maturity. The packages of interest rate and maturity were randomised to the individuals in the sample so to enable the estimation of the interest rate and maturity elasticity of the demand for loans. In a recent paper, Attanasio and Goldberg (1997) develop the work of Attanasio (1995b) and perform a similar exercise but on a sample of households who actually purchased (and occasionally financed) automobiles. The main advantage of the Attanasio and Goldberg exercise is that their data refer to actual choices. The main disadvantage relative to the work of Juster and Shay (1964) is that for the households that decided not to finance their car purchases neither interest rates nor maturity are observed. This poses a number of econometric problems that are similar to those that labour economists deal with when analysing participation choices and labour supply.
3.6. Taking into account demographics, labour supply and unobseroed heterogeneity In the previous sections, for the sake of expositional simplicity, I have neglected the vector of observable variables z and the unobserved component v in Equation (4). Their exclusion, however, especially if one wants to estimate or test the model, would be unrealistic. It is quite obvious, for instance, that family size and composition affect the marginal utility of a given amount of consumption expenditure. It is also likely that labour supply behaviour, and in particular female labour supply, will also affect the utility derived from expenditure. Working often implies bearing a certain number of costs that range from transport, to eating out, to clothing. Furthermore, if both spouses work, a number of services that would be produced at home by the partner not participating in the labour force would have to be purchased on the market and would be counted as consumption. More generally, it is plausible that consumption and leisure are not separable in the utility function and that consumption, saving and labour supply choices are taken simultaneously.
o.P. Attanasio
778
Given these considerations, it is important, especially if one wants to bring the model to the data, to consider a specification that allows for these factors. While it is true, as shown in Section 2, that consumption life cycle profiles often mirror income profiles, it is not obvious that one should interpret this as evidence of the empirical failure of the model without considering explicitly the possibility of important demographic effects and that consumption and leisure are not separable. These are not new arguments and I discuss them at length in Section 5, where I interpret the available evidence. The point of this section, however, is to stress that the consideration of these factor is not only important, but also relatively simple. If one does not want to model explicitly these variables, controlling for them does not jeopardise the empirical tractability of the model illustrated by Equations (8) and (9). I re-write a slight modification of Equation (4) for convenience: T-t
max Et Z [3J U(Ct+j, nd zt+j, vt+j), j=o
(4')
where the superscript nd indicates that I am now modelling explicitly only non-durable consumption. As before, the vector of observable variables z indicates variables that are relevant for the intertemporal optimisation problem. The variable u is unobservable to the econometrician. The latter variable is sometimes referred to as 'taste shift'. More generally, it represents all the unobservable factors that affect consumption choices and that we do not model or control for. The variables included in the vector z may range from demographic variables, to labour supply variable, to other components of consumption (such as services from durables). Notice that these variables may be either exogenous to the choice problem (age is a good example), or chosen simultaneously with non-durable consumption (such as labour supply). Even if one does not wish to model these latter variables explicitly, it is possible to identify, using Equation (4I), conditional preferences and the associated parameters under very mild conditions 39. If the z variables in Equation (4 ~) enter the utility function in an additive separable fashion there is no need to consider them. If, on the other hand, they affect the marginal utility of non-durable consumption, they will enter the corresponding Euler equation. As an example, let us consider the following parametrization: U ( C t d, zt, ot) -
(cpd)l-7 exp(O'zt + 1-y
ut).
(13)
A possible interpretation of Equation (13) is that the discount factor varies with variables z and v. Such an interpretation is particularly attractive for demographic variables. In this case, the vector of parameters 0 implicitly represents an equivalence scale.
39 See the discussion in Browningand Meghir (1991) on demand systemsconditionalon labour supply.
Ch. 11:
779
Consumption
Under the parametrization used in Equation (13), the Euler equation for non-durable consumption will be
E, [ \ ~ - j
[(,q,+a)
(1 + R ~ + , ) / 3 e x p [ O ' ( z t + l - z , ) +
v t + x - vt]
l
= 1.
(14)
It should be stressed that Equation (14) holds even if some of the variables included in z are endogenous choice variable, regardless of the way in which they are determined. Modelling labour supply or durable consumption, for example, can be quite difficult because of corner solutions, intertemporal (non)-separability and transaction costs. These problems do not need to be tackled explicitly and Equation (14) can be considered as an equilibrium relationship that holds at the optimal values of the endogenous z, regardless of how these are obtained. Equation (14) can be linearised in the same fashion as Equation (8) to obtain a log-linear expression similar to Equation (9). Neglecting the second moments, that I incorporate into the constant of the equation, we have: Alog(C~dl) = const. + oR~+1 + OtAZt+ 1 + Avt+l + et+l.
(15)
Notice that because of the presence of the term representing unobserved heterogeneity and taste shocks, the residual of equation has now two components, one which represents an expectational error and, by the assumption of rational expectations, is likely to be uncorrelated over time, and another that has an MA(1) structure if taste shocks are i.i.d, over time. If the unobserved heterogeneity term v has a time invariant component which is individual specific, it will be eliminated in the first differences. On the other hand, it is possible that such a term is persistent (rather than white noise) but not fixed and/or that the 'pure' discount factor/3 is individual specific. In the former case the term Av in Equation (15) would have a structure more complex than a simple MA(1), while in the latter, Equation (15) would have a fixed effect. In Section 5, I discuss these econometric problems. The particular parametrization considered in Equation (13) is just an example. More complex structures may be and have been considered. It is possible, for instance, to allow some of the variables in the vector z to affect the curvature of the utility function as well as the rate at which utility is discounted. Blundell, Browning and Meghir (1994) and Attanasio and Browning (1995) have used this approach and found significant deviations of estimated differences from the simple isoelastic case. The issue is particularly important in that preferences of this kind can allow for systematic differences in the elasticity of intertemporal substitution across consumers. Attanasio and Browning (1995) also stress the fact that to estimate an Euler equation and its parameters, it is not necessary to specify explicitly the within-period utility function. It is possible and analytically convenient to start from a flexible specification
780
0.17. Attanasio
for the marginal utility of consumption and, if needed, obtain the corresponding utility function by integration 4°.
3.7. Bequest motives
According to the simplest version of the life cycle model sketched at the beginning of the section, the main motivation for individual saving is to provide resources during the last part of the life cycle, when, following retirement, income is low. In such a situation aggregate wealth can be generated by and associated with productivity growth, if the generations that save (the young) are relatively wealthier than those that dis-save (the old). I f the bequest motive is operative, on the other hand, the mechanism through which aggregate wealth is accumulated is quite different. A lively exchange on whether a large or small proportion of aggregate wealth in the USA is accounted for by bequeathed wealth or retirement saving wealth developed in the 1980s between Kotlikoff and Summers [Kotlikoff and Summers (1981), Kotlikoff (1988)] on one side and Modigliani (1988) on the other. The result of that debate remained somewhat ambiguous, as the answer seems to depend mainly on whether one considers the interests earned on bequeathed wealth as originating from bequests or not. A bequest motive can be simply added to the basic model (1) by considering a term which is a function of the bequest left. As it is obvious such a term does not affect the Euler equation for consumption in subsequent periods. It will, however, affect the level of consumption (and saving). One of the implications of the simplest version of the life cycle model is that wealth is decumulated in the last part of the life cycle. While the rate at which wealth is decumulated depends on the parameters of the model and in particular about beliefs about longevity, the result that wealth should decline seems to be robust. The evidence on this point is mixed, in that several studies do not find strong evidence of decumulation of wealth by the elderly 41. When bequests motives are operative, from a theoretical point of view, the wealth age profile can take different shapes in the last part of the life cycle. In an important paper Hurd (1989) has characterised several of these profiles. Hurd also showed that for several realistic sets of parameters, the wealth age profile under bequests is also declining in the last part of the life cycle. From an empirical point of view, Hurd (1989) stresses the importance of conditioning on the labour force status of the individuals in the sample. In particular, whether individuals are retired or not seems to be crucial for the decumulation of their wealth.
40 If one follows such a procedure, one should check the integrability conditions. 41 JappeUiand Modigliani (1997) have forcefully argued that pension benefits should be considered as decumulation of pension wealth.
Ch. 11: Consumption
781
4. Aggregation issues The models considered in Section 3 refer to the dynamic optimisation problem faced by an individual consumer (or household). The early contributors to the life cyclepermanent income model were quite aware of the aggregation issues involved with the empirical implementation of the theory of intertemporal optimisation. These issues, however, were largely ignored by the literature of the late seventies and early eighties which focused mainly on the rigorous introduction of uncertainty in the model. Aggregation problems, however, cannot be ignored when the model is tested and when is estimated to evaluate structural parameters. In this section, I consider briefly two problems: the aggregation across consumers and that across commodities. 4.1. Aggregation across consumers
The Euler equations for (non-durable) consumption that can be derived from the problem in Equation (1) are, for most specifications of preferences, non-linear. As they refer to individual households, their aggregation is problematic. A number of papers have shown that the dynamics of aggregate consumption implied by the Euler equation for individual consumption cannot be described simply by the first moments of the cross-sectional distribution of consumption. Attanasio and Weber (1993), Blnndell, Pashardes and Weber (1993b) and Blundell, Browning and Meghir (1994) have shown that higher order moments can play an important role. Attanasio and Weber (1993), in particular, have stressed that the use of aggregate data to estimate an Euler equation is equivalent to omit high moments of the cross sectional distribution of consumption and might cause systematic biases in the estimation of structural parameters and lead to rejections of the over-identifying restrictions 42. These contributions will be discussed when I evaluate the empirical evidence, at this point I only wanted to stress that exact aggregation is in general impossible when considering the Euler equation for consumption. This implies that aggregate data cannot be used to estimate structural preference parameters and/or to test the model. Individual panel data on consumption might be very difficult to obtain. Partly because of this, many of the papers I discuss in Section 5 use the average cohort data that I have used in Section 2 to describe the individual data. The use of grouped data allows one to use time series of repeated cross section to study dynamic models. In this sense, average (or synthetic) cohort data are particularly useful to study life cycle models. It is important to stress, however, that synthetic cohort data are aggregate data; the difference relative to National Accounts data is that the aggregation process is controlled directly. As a cohort ages, the researcher can follow the evolution of the variables of interest, that range from consumption to income, to family size and
42 Blundell, Pashardes and Weber (1993b) make a similar point for a demand system. Similar results were obtained in an asset pricing frameworkby Constantinides and Duffle (1996).
782
O.P. Attanasio
composition, to labour supply behaviour. The presence ofnon-linearities in the relevant equations (as long as they are linear in the parameters) does not constitute a problem, as one can compute the relevant non-linear transformations before averaging the data. Unlike in the aggregate data, therefore, time series of the average of any non-linear transformations of the variables of interest is readily available. In addition to the standard aggregation problems caused by the non-linearity of the Euler equations, there is another sense in which aggregation across consumers can be problematic. As discussed above, it is likely that demographic variables are likely to be important for the determination of consumption. If one does not want to make arbitrary assumptions about the effects that these demographic variables have on the utility function, it might be necessary to consider individual data explicitly 43. In the aggregate, demographic variables move quite slowly so that, even neglecting nonlinearities, their effect cannot be estimated precisely from those data. On the contrary, differences across cohorts, observed over different parts of their life cycle, can be profitably be exploited to identify these effects. Finally, because repeated cross sections are much more common than long panels, one can estimate the structural parameters using a relatively long time period. The importance of a 'large T' in getting consistent estimates is discussed in section 5. The use of average cohort data is not without problems. Probably the most important is that of the presence of measurement error and sample variation. Particular care has to be devoted to evaluating the quality of the data and to use the appropriate econometric techniques. 4.2. Aggregation across commodities
Another important aspect which is often neglected in the literature on the Euler equation is the aggregation of expenditure on different commodities. In principle, one should consider simultaneously the allocation of total expenditure across time periods and the allocation within each period across different commodities. I f one had detailed enough data on expenditure on individual commodities and was willing to specify the form of the direct utility function, the problem could be addressed in a straightforward manner. One could consider the Euler equation defined in terms of the marginal utility of each individual commodity. The issue, however, is to determine under what conditions one can consider the within-period utility function defined in terms of total consumption and assume that the allocation of expenditure over time can be determined with the help of a single price index. One obvious and not particularly interesting answer is when relative prices do not change so that it is possible to construct a Hicks composite commodity. Gorman (1959) was the first to provide a more interesting answer in that he derived
43 Estimation of the effects of demographic variables can be interpreted as the estimation of adult equivalent scales and is therefore important for a variety of reasons.
Ch. 11: Consumption
783
the conditions that the utility function has to satisfy so that it is possible to consider a single commodity 44. In particular, it is necessary that preferences take the generalised Gorman Polar form, that is, i f X is the K x 1 vector of commodities andp the vector of corresponding prices, the indirect utility function has to take the form
V(X, p) = F(X/b(p), a(p)),
(16)
where b(p) and a(p) are functions homogeneous of degree 1 and degree 0 respectively and depend on within-period preferences. From the specification in Equation (16) one can derive an Euler equation for total consumption expenditure: two-stage budgeting can be used to separate the intertemporal from the within-period allocation. To implement Equation (16) it is necessary, however, to estimate the price functions a(p) and b(p), which requires the specification and estimation of a within-period demand system. In an important paper, Blundell, Browning and Meghir (1994) estimate a demand system and use the resulting price indexes to estimate the Euler equation for total consumption expenditure. A remarkable result they obtain is that a Stone price index (which does not require the knowledge of preference parameters) constitutes a good approximation to the price indexes in Equation (16). This result is important because points to a simple way to implement Euler equations for non-durable consumption without estimating the entire demand system. The results in Blundell, Browning and Meghir are generalised to a demand system with quadratic Engel curves by Banks, Blundell and Preston (1994). Attanasio and Weber (1995) with a different parametrization of the indirect utility function find a statistically significant role for the zero-homogeneous price index a(p) on US data. If one is willing to specify a utility function defined over several commodities, one can derive an Euler equation for each of these commodities. Under the assumption of additive separability, each of these Euler equation depends only on expenditure on that commodity, nominal interest rates, changes in the commodity-specific price index and on the relevant controls. On the other hand, when additive separability does not hold, the individual commodity Euler equation depends also on the consumption of other commodities. This is an important point in that creates problems for the use of data sources which contain information only on some components of total expenditure, such as the US PSID which gives only information on food consumption. Attanasio and Weber (1995) show that the consideration of food consumption in isolation can yield very misleading results. 5. Econometric issues and empirical evidence
I now move to consider the empirical evidence on the life cycle-permanent income model. In the process of doing so, I also discuss some of the econometric problems 44 See Deaton and Muellbauer (1980) for a clear discussion of these issues.
784
O.P. Attanasio
relevant for theanalysis. As I want to have a rigorous treatment of uncertainty, I only consider the contributions that followed the Hall (1978) paper. I start with a discussion of studies based on aggregate data and then discuss some based on individual data. As ! focus mainly on studies based on Euler equations, I do not discuss a large empirical literature, which has estimated flexible error correction models for aggregate consumption that I have mentioned in Section 2. 5.1. Aggregate time series studies
Because of the aggregation problems discussed in Section 4.1, it is my opinion that aggregate time series data cannot be used to estimate structural preference parameters and test the life-cycle model. Indeed, some papers, such as Attanasio and Weber (1993, 1995), have shown that aggregation issues can easily explain some of the rejections of the model found in the literature. Nonetheless, the papers that have tested the life cycle-permanent income model using aggregate time series data are many and almost impossible to list. Many of the most influential papers in the literature on consumption, such as those by Hall (1978, 1988), Hansen and Singleton (1982, 1983) and Flavin (1981), have been useful conceptual exercises that have brought to the attention of the profession many important issues. Among the most influential and most widely cited studies of aggregate time series papers are those of Campbell and Mankiw (1989, 1991). In these papers the authors consider a simple version of the Euler Equation (5) and estimate it on aggregate data with the addition of income growth on the right hand side. The justification they use for such a specification is that there is a fraction )~ of consumers behaving according to the permanent income-life cycle model while the remaining follow a 'ruleof-thumb' which consists in setting their consumption equal to their disposable income. Several scholars have since interpreted the coefficient ( 1 - ) 0 estimated by Campbell and Mankiw as the fraction of consumers that are 'liquidity constrained'. Campbell and Mankiw estimate their equation by instrumental variables 45 and obtain a coefficient ( 1 - ) 0 of 0.4. There is no reason to believe that the 'excess sensitivity' of consumption to income, as summarised in such a coefficient, represents the fraction of consumers that behave according to Campbell and Mankiw's rule of thumb. First of all, one would have to assume that, if the consumers behaving according to such a rule were the same, the fraction of income (and consumption) accruing to them was constant over time. Second, one would have to believe that the non-linearities in the Euler equation have no effect and could not generate such a result. Finally, to exclude that income and consumption are unrelated under the life cycle model, one would have to believe that consumption and leisure are separable in the utility function.
45 Because they worry about time aggregation, Campbell and Mankiw use instruments dated t - 2 and earlier.
Ch. 11: Consumpgon
785
More recently, in the spirit of the Campbell and Mankiw studies, several papers have studied the time series properties of aggregate consumption and have tried to interpret its relation to a number of other variables in terms of the life cycle-permanent income model or as alternative deviations from it. Carroll et al. (1994), for instance, relate consumption to the index of consumer confidence and provide some interpretation of the high predictive power that such a variable has. Ludvigson (1997), on the other hand, relates consumption to consumer credit and finds that 'excess sensitivity' of consumption to such a variable is even more marked than that to labour income. In the past, some of the papers that used aggregate time series data have also tried to incorporate in the model the possibility that consumption and leisure are not separable in the utility function. Bean (1986), Eichenbaum and Hansen (1988) and Mankiw, Rotemberg and Summers (1985) are examples of these attempts. The presence of corner solutions in labour supply, such as those observed in the case a spouse does not participate to the labour force or in the case of retirement, make the aggregation issues even more complicated.
5.2. Micro data: some econometric problems The analysis of household data on consumption presents a variety of problems that range from the availability and reliability of individual consumption data, to some subtle econometric problems. Of the many problems that is worth stressing three in particular are relevant for the discussion at hand. The first relates to the way in which consistent estimates are achieved from the orthogonality conditions implied by an Euler equation for consumption. The second concerns instead estimation and inference with average cohort data instead of genuine panels. The last point is about the presence of conditional second moments in the (log) linearised Euler equation.
5.2.1. Consistency of estimators derived from EuIer equations The first issue was pointed out by Chamberlain (1984) and subsequently discussed by Itayashi (1987), Altug and Miller (1990) and Deaton (1992) among others. The Euler equation for consumption for a generic individual i can be written as follows: i i Et [h(xt+l,x t, 0)] = 0,
(17)
where 0 is a vector of parameters and x a vector of observable and unobservable variables. Equation (17) states that a function of parameters and variables is orthogonal to information available at time t. If the unobservables are i.i.d, innovations to stationary processes, we can, without loss of generality, restrict the vector x to be made of observable variables. In such a situation one can identify a vector of instruments wt that, if its size is greater than the dimension of the parameter vector, can be used to identify it. The problem arises if one tries to exploit the cross sectional dimension rather than the time dimension to construct the sample equivalent of Equation (17). Equation (17)
786
o.P. Attanasio
implicitly defines expectational errors, which by rational expectations are orthogonal with lagged information, o f which, typically, the instruments are part. There is no reason to believe, however, that expectational errors average to zero in a cross section, at a given point in time. Analogously, there is no reason to believe that the cross sectional covariance o f h in Equation (17) with the vector o f instruments w equals zero. The addition o f time dummies, therefore, is not a solution for the problem at hand: each orthogonality condition one considers would imply the inclusion o f a vector of dummy variables. The only condition under which one can use the cross sectional equivalent of Equation (17) under which introducing a vector o f time dummies can solve the problem is when the expectational errors at a point in time are known to be exactly the same across individuals. But this is equivalent to assume complete markets. This is the option chosen, for instance, by Altug and Miller (1990) and by Atkeson and Ogaki (1996). If one is not willing to assume complete markets, the only alternative is to have a sample covering a long time horizon. This is necessary so that expectation errors average out to zero. Notice that the 'large T' refers to the total length o f the sample period over which individuals (or groups of individuals) are observed and not to the length over which a single individual is observed 46. The necessity of a 'large T' to obtain consistent estimates of the parameters o f an Euler equation follows from the nature o f the residuals of such an equation which incorporate expectational errors. The same argument does not apply to the residuals o f intratemporal (within-period) first-order conditions. Indeed, if expectational errors are the only component o f the residuals, such equations should have a perfect fit. It is for this reason that the consideration o f unobserved heterogeneity is crucial in the specification o f preferences [see Equation (13) above]. As mentioned in Section 3.6, the presence o f unobserved heterogeneity has implications on the nature o f the residuals of the Euler equation. The specification of preferences in Equation (13) implies that in Equation (9 ~) unobserved heterogeneity enters in first differences, so that, depending on the time series properties o f v~, the properties of the Euler equation residuals will be different. If the unobserved heterogeneity term v I has a time invariant component which is individual specific, it is differenced. If v I has a unit root, its differences would be white noise. I f the deviation o f v~ from a constant component are white noise, the residuals of the Euler equation are an MA(1) process. This has implications for the choice o f instruments and the computation o f the standard errors. The situation is more complicated if the deviations o f v I from its fixed component are persistent (rather than white noise) and/or if the 'pure' discount factor /3 is
46 A problem similar to the one just discussed is the issue of the presence of individual fixed effects in the Euler equation for consumption. These could arise, for instance, if the discount factors contain an individual specific component. In this case, the use of weakly exogenous instrument would be invalid. For a discussion of the issues related to this problem see Keane and Runkle (1992) and the comments to that paper in the Journal of Business and Economic Statistics.
Ch. 11: Consumption
787
individual specific. In the former case the term Ao in Equation (9 ~) would have a structure more complex than a simple MA(1), while in the latter, Equation (9 ~) would have a fixed effect. In such a situation the choice of instruments is not trivial, in that lagged individual variables are, in principle, correlated with the residuals of the Euler equation. The problem might be less severe if one uses average cohort data: grouping the individuals belonging to a given cohort averages out the individual fixed effects and leaves only the cohort specific ones. Here the availability of a long time period is once again crucial: it is possible to estimate cohort specific fixed effects (say in discount factors) by introducing cohort dummies in the Euler equation. The necessity of a 'large T' to obtain consistent estimates of the parameters of an Euler equation follows from the nature of the residuals of such an equation which incorporate expectational errors. The same argument does not apply to the residuals of intratemporal (within-period) first-order conditions. Indeed, if expectational errors are the only component of the residuals, such equations should have a perfect fit. It is for this reason that the consideration of unobserved heterogeneity is crucial in the specification of preferences (see Equation 13 above).
5.2.2. Average cohort techniques The lack of true panel data has often forced researchers to use the synthetic cohort data, which I have used in Section 2 for descriptive purposes, to estimate and test dynamic models, such as the Euler equation for consumption. The use of these techniques, pioneered by Browning, Deaton and Irish (1985) and discussed by Deaton (1985) and more recently by Moffitt (1993), has several advantages over real panels 47. Nonrandom attrition, for instance, is much less of an issue. On the other hand, one should be careful about the econometric problems induced by these data. In particular, because the size of the cell one uses to compute averages of the variables of interest is less than infinite, one should consider explicitly the presence of sampling error in the data one uses. Furthermore, because the averages are computed on the levels of variables and one is typically interested in the first differences of variables, the presence of sampling error induces an MA(1) structure on the residuals of the Euler equation estimated on synthetic cohort data. The presence of MA(1) residuals obviously has implications for the choice of the instruments and the computation of standard errors. The fact that synthetic cohort data are typically constructed out of independent repeated cross section, however, suggests simple valid instruments: by lagging the instruments an extra period should guarantee consistency of the IV estimator 48.
47 Average cohort techniques can be interpreted as an example of an estimator using complementary data sources of the kind discussed in Arellano and Meghir (1992). 48 The Consumer Expenditure Survey used, for instance, in Attanasio and Weber (1995) is a rotating panel so that the construction of valid instruments is more complicated.
788
O.P. Attanasio
The structure of the errors is even more complicated when one considers more cohorts simultaneously. In this case, one has to keep into account the possibility that the residuals of different cohorts in the same time period are correlated. The variance covariance matrix of the residuals is therefore quite complex. Its computation is, however, important to make correct inferences 49. Besides adjusting the estimated standard errors for the presence of an MA(1) error and the correlation among the expectationat errors of different cohorts, it is also possible to use a GLS type of scheme to improve the efficiency of the estimator. One should be careful, however, in filtering the data so to avoid the inconsistency caused by the correlation of lagged expectational errors with the instruments 5o. 5.2.3. Conditional second (and higher) moments
In Equation (9~), as in Equation (10), I have neglected the presence of conditional second (and, if the log-normality assumption does not hold, higher) moments that follows from the log-linearization of the Euler equation in (6). In theory, this is not quite correct in that these variables are likely to vary as new information is made available to the individual consumer. This is particularly true for the conditional variance of consumption which is endogenously determined by the model (consumption is a choice variable). Incorporating these variables in the constant is equivalent to assuming that innovations to the conditional second (or higher) moments of consumption and interest rates are uncorrelated with the variables typically used as instruments. Assessing the plausibility of this assumption is very difficult, especially because the answer is likely to depend on the time series properties (and in particular on the heteroscedasticity) of the determinants of consumption levels (income, wages and so on). In a recent paper, Ludvigson and Paxson (1997) have used numerical methods to compare the consumption function obtained from a log-linearised Euler equation to the 'true' one. Their method, however, does not provide estimates for the bias introduced in Euler equation estimation. Carroll (1997b) also uses numerical techniques to simulate log-linearised Euler equations, but focuses on the cross sectional rather than time series dimension, which, given the considerations in 5.2.1 is the relevant one. An interesting and novel approach to this problem is the one used by Banks, Blundell and Brugiavini (1997) in a recent paper. These authors use an approximation to the consumption fimction derived by Blundell and Stoker (1999) which implies weighting the conditional second moments by the ratio of income to wealth at a given point in time. Banks et al. (1997) also try to identify separately the effect of aggregate and cohort specific shocks. The main findings of the exercise are two. First, conditional
49 A technical problem arises from the fact that is not easy to guarantee that the estimated variance covariance matrix is positive definite in finite samples. 50 See Hayashi and Sims (1983).
Ch. 11:
Consumption
789
second moments are significant in the Euler equation; and second, the estimate of some important structural parameters, such as the elasticity of intertemporal substitution, is not much affected by the introduction of the conditional second moments. Yet another alternative to the log-linearization procedure is the one proposed in Attanasio and Browning (1995) who start with a flexible functional form for the (log) marginal utility of consumption so to avoid the necessity of approximating an Euler equation. Should one be interested in the utility function that generates such a function, one can obtain it by integration. Not only does this method avoid dealing with the issue of linearization, but gives the possibility of estimating much more flexible functional forms than the isoelastic one. This is not to say that precautionary motives are unimportant, but that their relevance is going to depend on the curvature of the marginal utility of consumption and is, in the end, an empirical matter. The alternative of estimating a non-linearised Euler equation (such as Equation 8) is particularly unappealing because it would imply assuming away measurement error and would, in any case, make the use of average cohort techniques much harder, if not impossible. 5.3. Micro data: some evidence
In this section, I do not discuss in detail all the papers that have estimated and tested Euler equations for consumption using micro data. Rather, I summarise some of the main contributions with an eye to the overall evaluation of the evidence which I give in the next sub-section. One of the first papers to consider the implications of the permanent incomelife cycle models with micro data is Hall and Mishkin (1982) in which the authors used PSID data to test and reject the implication that consumption changes were uncorrelated with lagged values of current income. Hall and Mishkin (1982) evidence was later criticised by Altonji and Siow (1987) because it did not allow for measurement error. Hall and Mishkin (1982) focused on the permanent income hypothesis and did not consider explicitly the Euler equation that one can get from the consumer intertemporal optimisation problem. One of the first, and probably the most influential article to take such an equation to the data, was the paper by Zeldes (1989a), who implemented ideas very similar to those in Runkle (1991). In both articles, the Euler equation is fitted to observations on food consumption from the PSID. In both articles, the authors consider explicitly the possibility of liquidity constraints and the possibility that these constraints affect different group in the population differently. Effectively, Zeldes (1989a) and Runkle (1991) estimated versions of Equation (12) for different groups of the populations that had, on the basis of an observable variable, different probabilities of having/tt = 0. The results they get, however, are quite different. Zeldes (1989a), in particular, splits the sample according to the wealth held and finds that the rate of growth of consumption is related with the lagged level of income for the low wealth sample. The
790
O.P. Attanasio
same result does not hold for the high wealth sample. Zeldes interprets this results as evidence of binding liquidity constraints for a large fraction of the population. Runkle (1991), who uses a different extract of the PSID, and different econometric techniques, obtains different results 51. Since Zeldes (1989a) and Runkle (1991), many papers, including Hayashi (1985a,b), Garcia, Lusardi and Ng (1997), Lusardi (1996), Mankiw and Zeldes (1994) and Shea (1995), have used PSID data, either alone or in conjunction with other data, to estimate and test various versions of the model. Shea (1995), in particular, identifies a subsample of PSID households for whom he can track their union wage contracts and therefore construct a good measure of their expected wage growth. As many others, Shea (1995) tests (and marginally rejects) the hypothesis that consumption growth is not related to wage growth. Shea (1995), however, also notices that liquidity constraints imply an asymmetry between households who expect a decline and a rise in wages, because the former should be saving rather than borrowing. As he fails to identify these effects, his results cast doubts about the plausibility of liquidity constraints as an explanation of the excess sensitivity of consumption growth to income or wage growth. One of the main problems with the PSID is that the measure of consumption that is included in the survey refers only to food consumption. I have stressed above the theoretical problems with such a measure. Attanasio and Weber (1995) show how the use of such a measure of consumption can lead to misleading results. In that paper, my co-author and I use average cohort data constructed from the CEX for the period 1980-1992 to show that some of the excess sensitivity results obtained on micro data can be accounted for by the non-separability of food and other consumption. The other two issues on which Attanasio and Weber (1995) focuses are the effects of aggregation over consumers and over commodities. As far as the aggregation over commodities is concerned, Attanasio and Weber (1995) find significant effects of the zero-homogeneous price index in Equation (14) that, however, are not quantitatively important. This evidence is consistent with that for the UK FES reported in Blundell, Browning and Meghir (1994) and Banks, Blundell and Preston (1994). About the aggregation over individuals, Attanasio and Weber (1995) report evidence which shows that the effect of the non-linearities in the Euler equation can be quite important. This is consistent with the evidence reported in Attanasio and Weber (1993) on FES data. In the latter paper, my co-author and I show that aggregating the individual data so to obtain an aggregate conceptually similar to the National Accounts statistics (i.e. taking the log of the arithmetic mean of consumption) one obtains results that are quite similar to those obtained with aggregate times series data. In particular, it is possible to obtain excess sensitivity to predicted income, a low estimated elasticity of intertemporal substitution and rejection of the overidentifying
51 Keane and Rtmkle (1992) have recently re-estimated Zeldes' equations on his data but using different econometrictechniques. Jappelli, Pischke and Souleles (1997) match SCF data, which contain information on self reported 'liquidity constrained' status with PSID data.
Ch. 11:
Consumption
791
restrictions. The results obtained aggregating the data in the proper way (i.e. taking the average of log consumption), however, are much more consistent with the theoretical model. In particular, there is no rejection of the overidentifying restrictions. The difference between the log of the average and the average of the log is a measure of inequality which varies over the business cycle and is likely to be correlated with the instruments used in estimating the Euler equation. The last group of papers I have cited [Attanasio and Weber (1993, 1995), Blundell, Browning and Meghir (1994), Banks, Blundell and Preston (1994), Attanasio and Browning (1995)] all stress the importance of controlling for demographic factors and for labour supply effects. These papers, which use average cohort data for the UK and the USA (the data presented in Section 2) show that once one controls for the influence that demographics and labour supply might have on the marginal utility of consumption, there is no evidence of excess sensitivity of consumption to income or rejection o f the overidentifying restrictions. Female labour force participation and family size seem to be particularly important in this respect 52. If one believes that the estimation of the Euler equations discussed in this section yields consistent estimates, the parameter on the real interest rate can be interpreted as the elasticity of intertemporal substitution. Such a parameter is of some importance for a number of policy issues and its size has been discussed at length. Hall (1988) in particular, claims that the use of the correct instruments delivers very low estimates of this elasticity. However, the evidence that emerges from the micro studies which use an isoelastic specification of preferences [such as Attanasio and Weber (1993, 1995), and Blundell, Browning and Meghir (1994)], is that, both in the UK and in the USA, the elasticity of intertemporal substitution of consumption (EIS) is just below 153. From the discussion above, it is clear that in addition to the EIS, a number of other parameters, measuring the effect of leisure, that of demographics or other variables affecting the marginal utility of consumption are likely to be extremely important in determining the level of consumption. Their interpretation, however, is not easy without a solution for the level of consumption.
6. Where does the life cycle model stand?
It is now time to take stock on the empirical relevance of the models discussed so far. My reading of the evidence briefly presented in Section 5 is that the life cycle model, enriched to account for the effect of demographic and labour supply variables, is not rejected by the available data. Alternatively, and perhaps more accurately, one could
52 Demographicvariablesmight be capturing the effect of the conditional second (and higher) moments ignored in the log linearization procedure. Lusardi (1996) criticises the use of income data in the CEX as they might be affected by measurement error. 53 As mentioned above, the use of aggregate rather than individual data and aggregation problems can explain part of the differences in the size of the estimatesof the elasticity of intertemporal substitution.
792
0.t?. Attanasio
say that the life cycle model can be made complex enough not to be inconsistent with the available data. This view is not widely accepted in the profession so that it deserves some discussion. Before discussing these issues, however, a number of caveats are in order. First, the model has been fitted with success only to households in the middle of their life cycle. While these account for a large fraction of aggregate consumption, additional work is needed to understand the behaviour of young and elderly households. The behaviour of retirees in particular, can be quite difficult to model. I f leisure and consumption are non-separable in the utility- function, a radical change in labour supply could be linked to a change in consumption. Furthermore, a number of other important factors, ranging from family size, to health status, to the probability of death, changes dramatically in the years after retirement. In section 2, we have seen that both in the USA and especially in the UK, consumption drops substantially at retirement. This could be related to insufficient savings and a misperception about the amount of (public and private) pension benefits. Alternatively, the drop in consumption could be explained within the optimisation framework of the life cycle model if considered together with all the changes mentioned above. This important topic is studied in a recent paper by Banks, Blundell and Tanner (1998) who find that, even ignoring health status and mortality issues, two thirds o f the drop in consumption observed around retirement can be rationalised by an optimisation model. Second, while the endogeneity of labour supply choices can be controlled for in the empirical analysis, the joint modelling of consumption and of labour supply is extremely valuable and is still at the beginning 54. Similarly, expenditure on durables, which is an important component of total expenditure, needs to be modelled in a different way, as discussed in Section 8. Third, the fact that a particular specification of preferences fits the data reasonably well and that one can obtain consistent estimates of the structural parameters, does not mean that borrowing restrictions and liquidity constraints are unimportant. The Euler equation can be a very poor tool for identifying the presence of such phenomena, as the equation holds whenever the constraints are not binding. For the notion of liquidity constraints to be useful, however, it is necessary to model the behaviour of constrained individual explicitly and determine what the aggregate implications of these constraints might be. A literal interpretation of the papers mentioned in the last part of Section 5 is that a flexible version of the life cycle model, which allows for demographic and labour supply effects in the utility function, cannot be rejected by the data. Neither excess sensitivity tests, nor tests of overidentifying restrictions reject the null. The strength
54 Surprisinglyfew studies analyse consumption and labour supply choicesjointly. An almost exhaustive list includes MaCurdy (1983), Browning, Deaton and Irish (1985), Hotz et al. (1988), Altug and Miller (1990), Blundell, Meghir and Neves (1993a) and Attanasio and MaCurdy (1997). Of these only the last two papers consider female and male labour supply jointly.
Ch. 11:
Consumption
793
of a result that does not reject the null, however, obviously depends on the power of the test used. The power of the tests of overidentifying restrictions or of the excess sensitivity tests that fail to reject within a sufficiently complex version of the model might be questioned. If an Euler equation is saturated with demographic and labour supply variables, it might be hard to measure precisely the coefficient on expected income or, more generally, reject overidentifying restrictions. This problem might be particularly serious if some of these variables, such as labour supply, are correlated with expected income. In this sense, this criticism is equivalent to state the difficulty in distinguishing hypotheses about preferences from hypotheses on budget constraints. A possible response to this kind of criticism is to check whether the preferences parameters of the model that is not rejected by the data are sensible and, most importantly, whether the model is able to explain facts other than those that have been used to fit it. An example will make this argument clear. In Attanasio et al. (1996), my co-authors and I consider a relatively simple version of the life cycle model where the within-period utility function includes demographic variables and whose parameters are assumed to be the same across education groups. Such a specification of the model is estimated on US average cohort data and it is not rejected by the data. The elasticity of intertemporal substitution is estimated to be just below 1. Given some hypotheses about the stochastic process that generates income, interest rates and demographic variables, and given an assumption on terminal conditions, one can solve numerically for the consumption function at each age. We do so and then simulate the model for income and demographic profiles calibrated on different education groups. With this technique we are able to reproduce some of the main feature observed in the data, that is, that the consumption profiles are steeper for the groups that have a steeped income profiles. This feature of the data has been interpreted as a failure of the life cycle model by Carroll and Summers (1991). Our exercise, however, shows that a flexible version of the life cycle model incorporating some realistic features, such as the effect of family composition on utility, can explain it. The result is remarkable because there is nothing, at the estimation level, that fits the particular feature of the data (differences in consumption age profiles by education groups) that the estimated preferences (assumed to be the same across groups) and the differences in demographic profiles are able to explain. In this sense the exercise constitute a genuine 'out-ofsample' verification of the ability of the model to fit the data. As the utility function is of the CRRA type, the model also incorporates the precautionary motive linked to income uncertainty which Carroll (1997a) has recently advocated as the most likely explanation of the relationship between the shape of consumption profiles and that of income profiles. The simulations show, however, that this effect is quantitatively less important than that generated by differences in demographic profiles. Indeed, most of the 'tracking' of consumption and income profiles is generated by corresponding similarities in demographics. This argument
794
O.P. Attanasio
is also consistent with the evidence presented in Section 2 where consumption 'per adult equivalent' profiles are quite flat over the life cycle 55. The simulation techniques used in Attanasio et al. (1996) are similar to those used by Deaton (1991) and by Hubbard, Skinner and Zeldes (1994), among others, to obtain a closed form solution for consumption. These techniques are the only way, if one is not willing to assume quadratic utility or CARA utility [as in Caballero (1990a)] 56, to obtain a consumption function in the presence of uncertainty. They are quite expensive as they are numerically intensive for any problem which goes beyond the simplest assumptions and require the researcher to take a stand on any detail of the optimisation problem (from the terminal condition to the nature of the income process). The payoff one can obtain can, however, be quite large. The Euler equation approach, first used by Hall (1978) in the consumption literature, was a major innovation. It allowed the rigorous consideration of uncertainty in a complicated dynamic decision problem while preserving the empirical tractability of the model. The beauty of the approach consists in the fact that exploits the main implication of the life cycle-permanent income model, that is that an optimising consumer keeps the discounted expected value of the marginal utility of consumption constant, to eliminate the unobservable 'fixed effect', the marginal utility of wealth, which incorporates the influence of expectations and all the variables that are relevant for the consumer optimisation problem. The price that one pays by differencing out the marginal utility of wealth is, however, non-negligible. While it is true that one can use the Euler equation to estimate structural parameters, one looses the ability of saying anything about the l e v e l of consumption. This implies that without additional information and structure, it is not possible to answer a number of extremely important questions. In other words, the Euler equation for consumption is n o t a consumption function and therefore it does not tell us anything about how consumption reacts to news about the economic environment in which economic agents operate. The symptom of this unsatisfactory state of affairs are apparent in the literature. If one reads, for instance, the literature on saving, which in recent years has dealt with a number of interesting issues that range from the decline in personal saving rates in the USA to the effects of tax incentives on personal and national saving, one rarely finds a systematic use of Euler equation estimates or even references to the Euler equation literature. Indeed, the use of structural models of consumption behaviour is quite rare. On the other hand, the same literature suffers from a number of identification problems that arise from the inability or unwillingness to put more structure onto the descriptive analysis. A good example is the debate on the effectiveness of fiscal incentives to retirement saving.
55 It can be argued that the demographics in the Euler equation for consumption are picking up the effect of the omitted conditional higher moments. 56 Both in the case of quadratic and CARA utility a number of additional assumptions about interest rates are necessary.
Ch. 11: Consumption
795
It seems that, 40 years after the publication o f Friedman's book, we still have not been able to construct a 'consumption function' which incorporates the main features of the dynamic optimisation model without loosing analytical and empirical tractability. The development o f the numerical solution techniques referred to above is one possible avenue. The main problem with these techniques, however, is that they require a complete specification of the economic environment (including terminal conditions) in which the agent lives. Therefore, to make the problem treatable, even with the use o f powerful computation methods, very strong assumptions are needed. Furthermore, we cannot use the conditioning arguments which simplify the estimation o f an Euler equation. While at the estimation level variables such as durables and labour supply can be rigorously treated as endogenous without modelling them explicitly, at the level o f numerical solutions, they cannot be ignored.
7. Insurance and inequality One o f the main implications of the life cycle model sketched in Section 3, is the fact that households attempt to smooth consumption over time. I f one sees an individual household in isolation, this can be achieved only through the accumulation of buffer stock saving or through borrowing. However, if one considers the interaction of many households, one realises that if individual shocks are not perfectly correlated, there is scope for the diversification o f idiosyncratic risk and for welfare improving contracts that allow the individual households to share part o f the risk they face. The essence o f a risk sharing situation, as formalised, for instance, by Townsend (1994), is well described by one of the characters in Shipping News, the novel by Anne Proulx set in Newfoundland. Describing life in one of the small islands off the coast, he declares "... it was never easy ... on Gaze Island, but they had the cows and a bit of hay, and the berries, the fish and the potato patches, and they'd get their flour and bacon in the fall from the merchant over at Killiek-Claw, and if it was hard times, they shared, they helped their neighbor. No they didn't have any money, the sea was dangerous and men were lost, but it was a satisfying life in a way people today do not understand. There was a joinery of lives all worked together, smooth (pp. 16~169) in places, or lumpy, but joined." Social and economic interactions in modern western societies are probably much more complex than those that prevailed on Gaze Island. It is however an interesting question to establish to what extent institutions of various kinds are used to smooth consumption across households and to diversify idiosyncratic risk. In other words, it might be interesting to establish the extent to which implicit or explicit contracts, family networks, social safety nets and so on can approximate the intertemporal allocation that would prevail under complete contingent markets o f the kind described in an Arrow-Debreu equilibrium. Furthermore, it might be interesting to establish what are the welfare costs implied by the lack o f complete contingent markets, given the nature of the observed idiosyncratic shocks.
796
O.P Attanasio
From a theoretical point of view, the basic proposition can be derived if one considers the allocation problem faced by a central planner who maximises, given a set of Pareto weights, the average of individual utilities given the resource constraint. This framework is particularly useful because it can be used to control easily for a number of factors and in particular for the presence of multiple commodities, non-separable leisure and so on. The basic implication is that the rate of change of the marginal utility of consumption (which might depend on leisure and other commodities) is equalised across individuals. Townsend (1994) was one of the first to consider the empirical implications of complete market, that is that under certain conditions "... individual consumptions are determined by aggregate consumption, no matter what the date and history of shocks, and so individuals' consumption will move together" (p. 540) 57. While Townsend (1994) considered data from India, other studies, such as Mace (1991), Cochrane (1991) and Hayashi et al. (1996), performed similar exercises using US data, that is either the CEX or the PSID. Both Cochrane (1991) and Hayashi et al. (1996) reject the implications of the risk sharing hypothesis. Cochrane (1991) finds that food consumption changes in the P SID are related to changes in health and employment status. Hayashi et al. (1996) use the same data but control for the possibility that the relationship between changes in wages and consumption is generated by the non-separability of leisure and consumption in the utility function. By following spin-offs in the PS1D, they also test (and reject) the hypothesis that risk is shared among families. Attanasio and Davis (1996) have matched data from the Current Population Survey and the CEX to test the hypothesis that movements in relative wages are reflected into movements in relative consumption or, to be precise, in marginal utilities of consumption. Attanasio and Davis consider education and year of birth cohorts. Most of the variability in relative wages comes from the shifts in the wage distribution across education groups that occurred during the 1980s. They find that such movements were mirrored in movements in the consumption distribution, indicating a 'spectacular failure' of the perfect insurance hypothesis 58. The analysis of Attanasio and Davis is particularly damning for the perfect insurance paradigm because it focuses on economy wide, well observed shifts, and therefore the relationship between consumption and income cannot be explained with models which consider private information such as those in Phelan and Townsend (1991). Attanasio and Davis (1996) also try to evaluate the welfare cost of the lack of an institutional framework that allows for the diversification of idiosyncratic risk. The evaluation of such a cost obviously depends on preference parameters and on
57 Townsend (1994) credits Diamond (1967) and Wilson (1968) with the first versions of this proposition. 58 As Hayashi et al. (1996), Attanasio and Davis (1996) use lead as well as lags of wages as instruments. Both studies consider short and long tun shocks.
Ch. 11: Consumpgon
797
the nature o f the shocks considered. Attanasio and Davis (1996) under a set of plausible assumptions and a coefficient o f relative risk aversion of two, evaluate the cost of the lack of insurance to 'group specific shocks' at 2.5% of consumption. This estimate is considerably larger than the cost of business cycle fluctuations evaluated by Lucas (1987) and is more in line with the results reported by Imrohoroglu (1989). It should also be stressed that Attanasio and Davis (1996) estimate completely ignores 'within-groups' shocks and focuses mainly on relative low (rather than business cycle) frequencies. Whilst the analysis of Attanasio and Davis (1996) can be framed in terms of a test of the perfect insurance hypothesis, it can also be interpreted as documenting the evolution in inequality in consumption and wages in the USA during the 1980s. The increase in inequality in wages in the USA has been analysed in many studies by labour economists. On the other hand, the evolution o f inequality in consumption has not received much attention until quite recently. Little is known about the evolution of consumption inequality over the business cycle and over different stages of the process of economic growth. In addition to Attanasio and Davis (1996), Cutler and Katz (1991) analyse the evolution of inequality in consumption during the 1980s using CEX data. Goodman, Johnson and Webb (1997) provide an exhaustive analysis of the recent trends in both income and expenditure inequality in the UK. The lack of evidence on consumption inequality is somewhat disconcerting, especially if one compares it to the amount of evidence on wage and income inequality. From a theoretical point of view, it is not completely obvious which of the two measures of inequality is more interesting. Blundell and Preston (1998) discuss the advantages and drawbacks of both: consumption inequality is more likely to reflect the cross sectional variability of permanent income, while income inequality is more affected by temporary shocks. The relationship between the two, however, depends on a number of factors that range from the specification of preferences to the nature of the income shocks, to the institutions and instruments available to households to (self) insure against idiosyncratic shocks. More generally, a theoretically consistent analysis of consumption inequality cannot avoid the discussion of the implications of different preference specifications and market institutions. Suppose, for instance, that individual households are prevented from borrowing. If labour supply behaviour is considered exogenous, these households will engage in precautionary saving to avoid the effects of extremely negative shocks to income. On the other hand, if one models labour supply choices and in particular female participation in the labour market, it is quite possible that the role of precautionary saving is taken by labour supply. That is to say, it is possible that households, rather than consuming less goods, decide to consume less leisure. Another important element, which has been only recently analysed, is the availability of means tested safety nets. Hubbard, Skinner and Zeldes (1994) consider the effect that liquidity constraints and means tested safety nets have on the pattern of consumption using numerical techniques to solve the consumption function.
798
O.P. Attanasio
Browning and Crossley (1997) have recently considered another potentially important channel that some households might use to smooth the marginal utility of consumption over time: what they call small durables. The idea is intuitive: individuals that have no access to savings or loans to smooth out fluctuations in income, might postpone the replacement of small durables. The features that characterise the 'small durables' in Browning and Crossley's problem are the durability and the irreversibility (due to the lack of a second hand market) of such items, as well as the fact that scrappage decisions are not only determined by the physical depreciation but also by the economic situation faced by the agent. Browning and Crossley (1997) present both some theoretical results and some empirical evidence on a sample of Canadian unemployed supporting the importance of this type of smoothing behaviour. The evidence I presented in Table 6, about the relative variability of durable expenditure for groups of households with different levels of education is consistent with the idea that poorer individuals might use durables to smooth out fluctuations in income. Browning and Crossley (1997) focus on items that cannot be used as collateral (such as clothes or small appliances) to obtain loans. It would be interesting to consider the implications of the same ideas for the replacement of items for which reasonably efficient second hand markets exists and which are collateralizable such as automobiles and, to a certain extent, 'white goods'. Greenspan and Cohen (1996) have stressed the important role that scrappage of old cars plays in forecasting expenditure on automobiles which, in turn, is a very important indicator of the status of the business cycle. A few studies, recently, have started to study the evolution of inequality over the life cycle. The idea is quite simple: if consumption follows a random walk, the cross sectional distribution of individual consumption should 'fan out' over the life cycle. That is, the cross sectional variance of individual consumption should be increasing, on average, over long periods of time. This idea was first exploited by Deaton and Paxson (1994) who analysed average cohort profiles for the variance of (log) nondurable consumption in three different countries, the USA, the UK and Taiwan.
8. Intertemporal non-separability In the discussion so far, I have assumed that preferences are separable over time. While this is an extremely convenient assumption, it is easy to think of situations in which it is violated. In this section I consider the implications of the fact that current expenditure might have lasting effects. After sketching the general problem, I discuss in detail two particular examples of time non-separability of some importance: that of durability and of habit formation. As is clear from the discussion, the complication implied by time dependence of preferences is only one of the things that make the treatment of these phenomena extremely hard. The general problems can be stated in reasonably simple terms if one states the problem in terms of a flow of services derived from a 'stock' and assumes that there
Ch. 11: Consumption
799
are no costs in changing the 'stock'. The simple problem in Section 3, can therefore be re-written as: T-t
max
Et v(s,+j) j=0
IAt+j+l~l+rt+j)At+j+Yt+j-st+j,
subject to [St+j = Z
(18)
= 1
k=0
where St is the 'stock' from which utility is derived, st is expenditure and the coefficients ak define the type of time dependency. As we see below, such a model can easily incorporate durability as well as habit formation. It is also straightforward to consider the case in which S is a vector whose components have different degrees of durability 59. A rational individual, in choosing the level of expenditure s will take into account the effect that this has on the level of the 'stock' in the current as well as in the future period. It is straightforward to verify that the first-order condition for such a problem is going to be
Etmt = Et[3(1 + rt+l) mr+l, T
(19)
t
where m t = ~-~'~k=0~ku1(St+k) ak" Notice that if the ak s are different from zero, mt is not a variable known at time t as it depends on the future marginal utility of the stock S. In general, therefore, it will not be possible to express Equation (19) in terms of the rate o f growth of mt as is usually done [see, for instance, Equation (8)]. Notice also that the marginal utility of expenditure mt depends on a potentially very large number of terms. To make an equation such as (19) operational it will be necessary to simplify it by some algebraic manipulation whose nature depends, once again, on the pattern of the coefficients ak. The two models of non-separability I consider below (durables and habits) differ on the nature of the time dependence. In the first case we have substitutability, while in the latter we have complementarity of expenditure over time.
8.1. Durables As illustrated in Section 2, expenditure on durables, both at the aggregate level and at the cohort level, is by far the most volatile component of consumption. In addition, the dynamic of durable expenditure seems much more complex of that of the other components o f consumption. A simple model of durable consumption can be obtained
59 See, for instance, Eichenbaum and Hansen (1990).
O.P Attanasio
800
from the system in Equation (18) if it is assumed that ak = (1 - 6) k. In this case S can be interpreted as the value of the stock of durables, and 6 as the depreciation rate, and the third equation in system (18) becomes St = (1 - 6)St_1 +st.
(20)
Assuming quadratic utility, Mankiw (1982) generalised Hall's random walk model to durable expenditure. In particular, he showed that under these circumstances the model implies that changes in expenditure should follow an MA(1) process with coefficient equal to ( 1 - 6). This implication is strongly rejected by the aggregate data, as shown, for instance, in Section 2. Dunn and Singleton (1986) have used a more attractive preference specification and considered the Euler equation for durable consmnption and its implications for asset pricing. The most comprehensive treatment of durability and of the Euler equations associated with a variety of preferences is found in Eichenbaum and Hansen (1990) who use a Gorman-Lancaster technology that converts expenditure into stocks and stocks into services over which utility is defined. The aggregation issues I discussed in Section 4 are obviously relevant for durables as well. The aggregation problems are actually even more complicated because of the possibility of corner solutions, i.e. households that decide not to own a durable (a car for instance), that can be safely ruled out for non-durables under the assumption that the marginal utility goes to infinity at zero or low levels of consumption 6°. A possibility for the deviations of the dynamics of aggregate durable expenditure from that implied by the simple model is that of the existence of adjustment costs. It seems natural to assume that adjusting the stock of durables involves costs, motivated both by the existence of imperfections in the second hand market and by 'pure' adjustment costs (such as search costs, taxes and similar). The literature first studied convex (typically quadratic) costs of adjustment. A typical example is Bernanke (1984, 1985), who estimated models with quadratic costs both with aggregate and individual data. Eichenbaum and Hansen (1990) also incorporate the possibility of adjustment costs in their technology. Such attempts, however, have turned out to be unsuccessful. The main reason for this is that convex adjustment costs predict a smooth adjustment towards an equilibrium. To avoid increasing costs households will adjust their stock of durables often and by small amounts. Even casual observation suggests that this is not a very accurate description of household behaviour. The next step is then to consider non-convex costs of adjustment; that is either fix or proportional costs. The characterisation of optimal behaviour under this type of costs is obviously much harder because for many households in many periods the optimal policy involves no adjustment. The first paper to characterise the optimal
6o Bernanke (1984) and Hayashi (1985a,b) are among the few studies that have used individual data to analyse durable expenditure.
Ch. 11: Consumption
801
adjustment policy under non-convex costs was Grossman and Laroque (1990) who studied a problem of a consumer deriving utility from a single durable and solving a dynamic optimisation problem involving the choice of the optimal size for the durable and the optimal portfolio investment for her financial wealth. Grossman and Laroque (1990) proved that the optimal strategy involves an (S, s) rule of the kind considered in the optimal inventory literature of the 1950s. Specifically, they proved that the value function associated to the consumer problem is a function of a single state variable, the ratio of the value of the durable to financial wealth, and that the durable is adjusted to a 'target' level when the state variable crosses a lower or an upper bound. When the state variable is within the two bounds the optimal policy is not to adjust the durable. In addition, Grossman and Laroque (1990) characterised the size of the inaction band as a function of the parameters of the problem, as well as the optimal portfolio strategy. One of the problems of the Grossman-Laroque model is that a solution can be obtained only if the problem can be expressed as a function of a single state variable. This precludes, for instance, the consideration of labour income. More recently, Eberly (1994) and Beaulieu (1993) have extended the Grossman-Laroque model in various directions. Eberly (1994), has showed that changes in the durable stock between periods in which an adjustment is performed obey to an Euler equation. Beaulieu (1993) has reformulated the Grossman-Laroque model and expressed the (S, s) rule in terms of the ratio of durables to non-durables. The attractiveness of the (S,s) model of adjustment lies in its implications that, in most periods, consumers do not adjust their stock of durables and when they do adjust, they usually make substantial adjustments. These features (large and infrequent adjustments), that can be generated by the (S, s) model, are the exact contrary of those of the quadratic adjustment model which yields small and frequent adjustments. The consideration of large and infrequent adjustments poses an entire new category of aggregation problems. Caplin (1985) was the first to consider them. Caplin and Spulber (1987), in the context of a model of price adjustment, provided (stringent) conditions under which lumpy individual adjustment could result in a smooth aggregate adjustment. Bertola and Caballero (1990) analysed the implications of the (S,s) type of adjustment for the dynamics of aggregate durable expenditure and stressed that the assumptions needed to generate the type of neutrality results obtained by Caplin and Spulber are indeed very fragile. (S, s) models can generate very rich and complicate dynamics that seem not to be inconsistent with the observed autocorrelation of durable expenditure. Caballero (1990a,b, 1993), in particular, has stressed how (S,s) models can generate patterns of MA coefficients that are similar to those I reported in Section 2. Caballero and Engel (1991) have studied more generally the aggregate properties of (S, s) economies. Caballero (1993) has tried to estimate the parameters of the (S, s) model by fitting the highly non-linear model resulting from the aggregation of a simple (S, s) rule to aggregate time series data. The estimation of (S, s) models with individual data is not an easy task for several reasons. First of all, the data requirements can be quite formidable: information on the value of the stock of durables before and after the adjustment is necessary. It is
802
o.P Attanasio
also desirable to follow households over some time to bound the range of inaction by the households that are observed not to adjust. In addition, the numerical problems in estimation can be quite formidable. The first attempt at estimating such a model with individual data was by Lam (1991) who estimated by maximum likelihood an (S, s) rule defined in terms of the ratio of the stock of automobiles over permanent income. Eberly (1994), also estimated the width of the (S, s) rule for the subset of consumers who were observed to adjust the stock of their automobiles in her sample 6~. B eaulieu (1992) also uses individual observations but follows a different approach. He considers a single cross section and computes the ergodic cross sectional distribution to which the economy would converge in the absence of aggregate shocks. The parameters of this distribution will depend on the parameters of the (S, s) rule. He can then estimate them from the parameters of the observed cross sectional distribution which is assumed to coincide with the ergodic distribution. Like Lain (1991), I have estimated the parameters of the (S,s) rule by maximum likelihood on individual data in Attanasio (1995a). However, I formulate the (S, s) rule in terms of the ratio of the stock of automobiles to non-durable consumption, allow for observed and unobserved heterogeneity in both the target and the band width and consider a more flexible stochastic specification. The consideration of unobserved heterogeneity in both the target level and the band width makes the model equivalent to a recent formulation of lumpy adjustment by Caballero and Engel (1991) who consider, rather than a strict (S, s) rule, a 'hazard function' which gives the probability of adjusting as a function of the difference between the current stock and its target level. While substantial progress in the understanding of the behaviour of models with lumpy adjustment has been made (not only in consumption but also in investment and labour demand), a lot of research is still necessary to establish the empirical relevance of these models and to quantify their parameters. The aggregate dynamics of an (S, s) system depends crucially on the properties of several stochastic processes about which we still have little or no information. These include the process by which the state variable changes when no adjustment occurs, the process by which the target level changes, the degree of heterogeneity in target levels and band width, the degree of persistence of individual shocks to band width (cost of adjustment) and the correlations among these variables.
8.2. Habit formation A form of intertemporal persistence of preferences alternative to durability is that of habits. As said above, habits can be obtained using a specific patterns for the 61 Eberly (1994) also splits the samplebetween consumers who are likelyto be liquidity constrained and those that are liquid. In doing so she uses both the procedure used by Zeldes (1989a) and a switching regression model.
Ch. 11:
803
Consumption
coefficients a in Equation (18). For instance, Heaton (1995) and Constantinides (1990) use the following specification: O<3
St = ct - a(1 - 0) ~
OJet a~;
O~a~l,
0~0~1.
(21)
j-0 The term (1 - 0) ~ ) ~ 00Jct-l-j is referred to as the 'stock of habits', which depreciates according to the parameter 0. A particularly simple specification is obtained when 0 = 0, in which case the stock of habits is simply given by last period consumption. As with the cases considered above, the marginal utility of time t expenditure is a function of both present and future variables, so that it is now known at time t. The habit formation model has a long history, dating back at least to Gorman (1967), Pollak (1970) and Houthakker and Taylor (1970) 62. Spynnewin (1981) presents an ingenious reparametrization of the optimisation problem which, by an appropriate redefinition of prices and quantities, allows the maximisation of an intertemporally additive function. However, it is only in the 1980s that habits models are coupled with the hypothesis of rational expectations and preferences incorporating temporal persistence are used to derive Euler equations analogous to Equation (19) above. Examples of this practice include Eichenbaum and Hansen (1988) (for a model with habit forming consumption and leisure), Eichenbaum and Hansen (1990), Novales (1990) and Constantinides (1990), while Hotz, Kydland and Sedlacek (1988) and Kennan (1988) consider habit formation in leisure. Browning (1991) uses a dual approach to derive the equivalent of 'Frisch' consumption functions in the presence of intertemporal non-separability 63. More recently, Heaton (1993, 1995) has considered the interplay between time aggregation and habit formation. His argument is that at high frequency consumption seems to exhibit substitutability, while at lower frequencies, there is evidence of complementarities. Heaton argues that the local substitutability of consumption could be explained by time aggregation. In general, he presents preferences that are flexible enough to accommodate the 'slow' formation of habits. Most of the work on habit models so far has been done on aggregate time series data. One of the reasons for this is the fact that very few panel data contain information on consumption. The CEX, which I used in Section 2, contains only up to four quarterly observations per households. The average cohort analysis that is used in the study of dynamic models of consumption, cannot be used in the analysis of habit formation, because these models involve the covariance of subsequent consumption observations f o r the s a m e household. In other words, we cannot aggregate the product C h t C ht k over the household index h, unless we have observations for times t and t - k for the same households. 62 Browning (1991), however, has citations from Marshall and Haavelmo. 63 Browning's simple structatre can encompass both substitutability and complementarities over time. The main problem with his approach is that he can only introduce uncertainty by considering points expectations about the future.
804
O.P. Attanasio
The only paper that studies time dependence in preferences using micro data is, to the best of my knowledge, Meghir and Weber (1996), that I discussed in the section on liquidity constraints. Another novelty of that paper is that it considers different components of consumption and allows for different levels of persistence depending on the commodity considered. The interesting evidence is that, when durable commodities are controlled for, there is no evidence of persistence in the 3 equations demand system that Meghir and Weber (1996) consider.
9. Conclusions
Rather than summarising the various sections that compose the chapter I prefer to conclude the chapter comparing the status of our knowledge and understanding of consumption behaviour to that of twenty years ago. It is fair to say that substantial progress has been made. In the last twenty years we have learned how to deal with uncertainty in a rigorous fashion and have recognised the importance that this may have for consumption and saving decision. Indeed an entire branch of the literature, that on precautionary saving, has developed to deal with these issues. While the emphasis given to the proper treatment of uncertainty and the lack of appropriate data sources has meant that many studies have focused on aggregate data, it has now become clear that it is very hard, if not impossible, to estimate preference parameters from aggregate time series data. Aggregation issues are important in many dimensions. In addition to the standard aggregation problems created by the non-linearity of the relevant theoretical relationships, there are other ways in which aggregation issues become important. Corner solutions and participation decisions (in labour and financial markets), inertial behaviour and transaction costs, all add a new dimension of complexity and make the cross sectional distribution of the variables under study relevant for the dynamics of the aggregate. The Euler equation has been the main instrument to analyse consumption both in micro and macro data, to estimate preference parameters and to test the overidentifying restrictions implied by the consumers' optimisation problem. In the process we have learned a lot about the econometric problems of estimating Euler equations. In particular, we have learned what are the identifying assumptions that one needs to make to get consistent estimates from the available data. The Euler equation is a powerful tool in that it allows the consideration of complex and flexible preference specifications without loosing the empirical tractability. As long as the variable over which one is optimising can be adjusted without cost and is not at a corner, one can derive an Euler equation which, even if it includes the values of other endogenous variables, delivers orthogonality restrictions that can be used to estimate preference parameters. The empirical research has used Euler equations for non-durable consumption and its components that have become, in the attempt to fit the observable data, increasingly complicated. This level of complexity is probably unavoidable if one is serious about taking the model to the data.
Ch. 11: Consumption
805
As I stressed several times during the chapter, the price one pays in dealing with Euler equations is not negligible: one loses the ability of saying anything about the level of consumption. The empirical tractability of the Euler equation is obtained differencing out the marginal utility of wealth, and therefore one of the main determinants of consumption levels. The challenge for future research is to construct a consumption function that incorporates the insights of the Euler equation and yet allows us to say something about the levels o f consumption and about how consumption reacts to changes in the economic environment. Such a consumption function is necessary to make predictions about future consumption, about saving behaviour, and about the effects of alternative policy measures. One possibility that is being explored is the use of numerical techniques. They have proved to be useful both to improve our understanding of the dynamic optimization problems typically postulated and to characterise the implications of different preference structures and economic environments on consumption and saving behaviour. They can also be used to validate, indirectly, the preference specifications implied by the Euler equation estimates that best fit the consumption growth data. Their main limitation, however, is an important one: they can only be used to analyse extremely simplified models and they require the full characterisation of the agents' economic environment. Several other areas of research are important and exciting. I will just mention two. Our understanding of consumption smoothing and of the evolution of inequality is still at the beginning. The development of this understanding and of the importance that different institutional frameworks and financial instruments have for these issues is an extremely important research agenda both from a positive and from a normative point of view. Related to this is also the issue of the time series properties of individual consumption: unlike for earnings and hours of work, next to nothing is known about this. Our understanding of durable expenditure is still very limited and yet it is an extremely important issue, both because durables are the most volatile component of consumption and because they have a number of features (the fact that they can be used as collateral, transaction costs, the durability itself) that make them difficult to model.
References
Abowd, J., and D. Card (1989), "On the covariancestructureof earnings and hours changes",Econometrica 57:411-445. Alessie, R., B. Melenberg and G. Weber (1989), "Consumption, leisure and earnings related liquidity constraints: a note", Economics Letters, 27:101-104. Alessie, R., M. Devereux and G. Weber (1997), "Intertemporal consumption, durables and liquidity constraints: a cohort analysis", European Economics Review 41:37-60. Altonji, J.G., and A. Siow (1987), "Testingthe response of consumption to income changes with (noisy) panel data", Quarterly Journal of Economics 102:293-328. Altug, S., and R.A. Miller (1990), "Household choices in equilibrium", Econometrica58(3):543 570.
806
O.P. Attanasio
Arellano, M., and C. Meghir (1992), "Female labour supply and on the job search. An empirical model estimated using complementary data sets", Review of Economics Studies 59:537-557. Atkeson, A., and M. Ogaki (1996), "Wealth-varying intertemporal elasticities of substitution: evidence from panel and aggregate data", Journal of Monetary Economics 38:507334. Attanasio, O.E (1994), "Personal saving in the US", in: J. Poterba, ed., International Comparisons of Household Savings (NBER/Chicago University Press) 57-124. Attanasio, O.E (1995a), "Consumer durables and inertial behavior: estimation and aggregation of (S, s) rules", Working Paper No. 5282 (NBER). Attanasio, O.E (1995b), "The intertemporal allocation of consumption", Carnegie-Rochester Conference on Public Policy, Supplement to the Journal of Monetary Economics. Attanasio, O.E, and J. Banks (1997), "Trends in household saving", Economic Policy, No. 27, 549-583. Attanasio, O.P., and M. Browning (1995), "Consumption over the life cycle and over the business cycle", American Economic Review 85:1118-1137. Attanasio, O.E, and S.J. Davis (1996), "Relative wage movements and the distribution of consumption", Journal of Political Economy 104:1227-1262. Attanasio, O.E, and EK. Goldberg (1997), "On the relevance of borrowing restrictions. Evidence from car loans in the US", mimeograph (University College London). Attanasio, O.E, and H.W Hoynes (1995), "Differential mortality and wealth accumulation", Working Paper No. 5126 (NBER); Journal of Human Resources, forthcoming. Attanasio, O.E, and T.E. MaCurdy (1997), "Interactions in household labor supply and their implications for the impact of EITC", mimeograph (Stanford University). Attanasio, O.E, and G. Weber (1989), "Intertemporal substitution, risk aversion and the Euler equation for consumption", Economic Journal 99(Suppl.):59-73. Attanasio, O.E, and G. Weber (1993), "Consumption growth, the interest rate and aggregation", Review of Economics Studies 60:631-649. Attanasio, O.E, and G. Weber (1994), "The UK consumption boom of the late 1980s: aggregate implications of microeconomic evidence", Economic Journal 104:1269 1302. Attanasio, O.P., and G. Weber (1995), "Is consumption growth consistent with intertemporal optimization? Evidence from the consumer expenditure survey", Journal of Political Economy 103:1121-1157. Attanasio, O.P., J. Banks, C. Meghir and G. Weber (1996), "Humps and bumps in lifetime consumption", Working Paper No. 5350 (NBER); Journal of Business and Economic Statistics, forthcoming. Banks, J., and EG. Johnson, eds (1997), How Reliable is the Family Expenditure Survey? Trends in Income and Expenditures over Time (The Institute for Fiscal Studies, London). Banks, J., R. Blundell and L Preston (1994), "Life-cycle expenditure allocations and the consumption cost of children", European Economic Review 38:1234-1278. Banks, J., R. Blundell and A. Brugiavini (1997), "Risk pooling and consumption growth", mimeograph (University College London). Banks, J., R. Bhmdell and S. Tanner (1998), "Is there a retirement saving puzzle?", American Economic Review, forthcoming. Bean, C.R. (1986), "The estimation of 'surprise' models and the 'surprise' consumption function", Review of Economics Studies 53:497-516. Beaulieu, J.J. (1992), "Aggregate movements in durable goods with fixed costs of adjustment", mimeograph (MIT). Beaulieu, J.J. (1993), "Optimal durable and non-durable consumption with transaction costs", Federal Reserve Board Washington, Finance and Economics Discussion Series, 93-12. Bernanke, B.S. (1984), "Permanent income, liquidity, and expenditure on automobiles: evidence from panel data", Quarterly Journal of Economics 99:587-614. Bernanke, B.S. (1985), "Adjustment costs, durables, and aggregate consumption", Journal of Monetary Economics 15:41 68. Bertola, G., and R.J. Caballero (1990), "Kinked adjustment costs and aggregate dynamics", in:
Ch. 11:
Consumption
807
O.J. Blanchard and S. Fischer, eds., NBER Macroeconomics Annual (MIT Press, Cambridge, MA) 237-288. Blinder, A., and A. Deaton (1985), "The time-series consumption revisited", Brookings Papers on Economic Activity 1985:465321. Blundell, R., and I. Preston (1998), "Consumption inequality and income uncertainty", Quarterly Journal of Economics 103:603-640. Blundell, R., and T. Stoker (1999), "Consumption and the timing of income risk", European Economic Review 43(3):475-508. Blundell, R., C. Meghir and E Neves (1993a), "Labor Supply and lntertemporal Substitution", Journal of Econometrics 59:137 160. Blundell, R., E Pashardes and G. Weber (1993b), "What do we learn about consumer demand patterns from micro data?", American Economic Review 83:570-597. Blundell, R., M. Browning and C. Meghir (1994), "Consumer demand and the lifetime allocation of consumption", Review of Economics Studies 61:57-80. Browning, M. (1987), "Eating, drinking, smoking, and testing the lifecycle hypothesis", Quarterly Journal of Economics 102:329-345. Browning, M. (1991), "A simple nonadditive preference structure for models of household behavior over time", Journal of Political Economy 99:607-637. Browning, M., and T. Crossley (1997), "Socks and stocks", mimeograph (McMaster University). Browning, M., and A. Lusardi (1996), "Household saving: micro theories and micro facts", Journal of Economic Literature 34:17921855. Browning, M., and C. Meghir (1991), "The effect of male and female labour supply on commodity demands", Econometrica 59:925-951. Browning, M., A. Deaton and M. Irish (1985), "A profitable approach to labor supply and commodity demand over the life cycle", Econometrica 53:503-544. Brugiavini, A., and G. Weber (1994), "Durable and non durable consumption: evidence from Italian household data", in: A. Ando, L. Guiso and I. Visco, eds., Saving and the Accumulation of Wealth (Cambridge University Press, Cambridge) 305-329. Caballero, R.J. (1990a), "Consumption puzzles and precautionary savings", Journal of Monetary Economics 25:113-136. Caballero, R.J. (1990b), "Expenditure on durable goods: a case for slow adjustment", Quarterly Journal of Economics 105:727-743. Caballero, R.J. (1991), "Earnings uncertainty and aggregate wealth accumulation", American Economic Review 81:859-871. Caballero, R.J. (1993), "Durable goods: an explanation for their slow adjustment", Journal of Political Economy, 101:351-384. Caballero, R.J., and E. Engel (1991), "Dynamic (S, s) economies", Econometrica 59:1659-1686. Campbell, J.Y. (1987), "Does saving anticipate declining labor income? An alternative test of the permanent income hypothesis", Econometrica 55:1249-1273. Campbell, J.Y., and A.S. Deaton (1989), "Why is consumption so smooth?", Review of Economic Studies 56:357074. Campbell, J.Y., and N.G. Mankiw (1989), "Consumption, income and interest rates: reinterpreting the time series evidence", in: O.J. Blanchard and S. Fischer, eds., NBER Macroeconomies Annual 1989 (MIT Press, Cambridge, MA) 185-216. Campbell, J.Y., and N.G. Mankiw (1991), "The response of consumption to income: a cross-country investigation", European Economic Review 35:715-721. Caplin, A.S. (1985), "The variability of aggregate demand with (S, s) inventory policies", Econometrica 53:1395-1409. Caplin, A.S., and D. Spulber (1987), "Menu costs and the neutrality of money", Quarterly Journal of Economics 102:703-726.
808
O.P. Attanasio
Carroll, C.D. (1994), "How does future income affect current consumption?", Quarterly Journal of Economics 109:111-147. Carroll, C.D. (1997a), "Buffer-stock saving and the life cycle/permanent income hypothesis", Quarterly Journal of Economics 112:1-55. Carroll, C.D. (1997b), "Death to the log-linearised Euler equation", mimeograph (Johns Hopkins University). Carroll, C.D., and M. Kimball (1996), "On the concavity of the consumption function", Econometrica 64:981-992. Carroll, C.D., and L.H. Summers (1991), "Consumption growth parallels income growth: some new evidence", in: B.D. Bernheim and J.B. Shoven, eds., National Saving and Economic Performance (University of Chicago Press, Chicago, IL) 305-343. Carroll, C.D., J.C. Fuhrer and D.W. Wilcox (1994), "Does consumer sentiment forecast household spending? If so why?", American Economic Review 84:1397 1408. Chah, E.Y., V.A. Ramey and R.M. Starr (1995), "Liquidity constraints and intertemporal consumer optimization: theory and evidence from durable goods", Journal of Money, Credit and Banking 27:272-287. Chamberlain, G. (1984), "Panel data", in: Z. Griliches and M.D. Intriligator, eds., Handbook of Econometrics, vol. 2 (North-Holland, Amsterdam) 1247-1318. Christiano, L.J., and M. Eichenbaum (1990), "Unit roots in real GNP: do we know and do we care?", Carnegie-Rochester Conference Series on Public Policy 32:7-61. Cochrane, J.H. (1991), "A simple test of consumption insurance", Journal of Political Economy 99: 957-976. Constantinides, G.M. (1990), "Habit formation: a resolution of the equity premium puzzle", Journal of Political Economy 98:519-543. Constantinides, G.M., and D. Duffle (1996), "Asset pricing with heterogeneous consumers", Journal of Political Economy 104:219-240. Cutler, D.M., and L.E Katz (1991), "Macroeconomic performance and the disadvantaged", Brookings Papers on Economic Activity 1991(1): 1-74. Davidson, J., D. Hendry, E Srba and S. Yeo (1978), "Econometric modelling of the aggregate time-series relationship between consumers' expenditure and income in the UK", Economic Journal 88:661-692. Davies, J.B. (1981), "Uncertain lifetime, consumption, and dissaving in retirement", Journal of Political Economy 89:561-577. Deaton, A. (1985), "Panel data from time series of cross sections", Journal of Econometrics 30:109-126. Deaton, A. (1991), "Saving and liquidity constraints", Eeonometrica 59:1221-1248. Deaton, A. (1992), Understanding Consumption (Oxford University Press, Oxford). Deaton, A., and J. Muellbauer (1980), Economics and Consumer Behavior (Cambridge University Press, Cambridge). Deaton, A., and C. Paxson (1994), "Intertemporal choice and inequality", Journal of Political Economy 102:437-467. Diamond, P. (1967), "The role of a stock market in a general equilibrium model with technological uncertainty", American Economic Review 57:759-776. Dreze, J., and E Modigliani (1972), "Consumption decisions under uncercainty", Journal of Economics Theory 5:308-335. Dunn, K.B., and K.J. Singleton (1986), "Modeling the term structure of interest rates under non-separable utility and durability of goods", Journal of Financial Economics 17:27-55. Dynan, K.E. (1993), "How prudent are consumers?", Journal of Political Economy 101:1104~1113. Eberly, J.C. (1994), "Adjustment of counsumers' durables stocks: evidence from automobile purchases", Journal of Political Economy 102:403-436. Eichenbaum, M., and L.E Hansen (1988), "A time series analysis of representative agent models of consumption and leisure under uncertainty", Quarterly Journal of Economics 103:51-78.
Ch. 11:
Consumption
809
Eichenbaum, M., and L.E Hansen (1990), "Estimating models with intertemporal substitution using aggregate time series data", Journal of Business and Economic Statistics 8:53-69. Epstein, L.G., and S.E. Zin (1989), "Substitution, risk aversion, and the temporal behavior of consumption and asset returns: a theoretical framework", Econometrica 57:937-969. Epstein, L.G., and S.E. Zin (1991), "Substitution, risk aversion, and the temporal behavior of consumption and asset returns: an empirical analysis", Journal of Political Economy 99:263-286. Flavin, M. (1981), "The adjustment of consumption to changing expectations about future income", Journal of Political Economy 89:974-1009. Flemming, J.S. (1973), "The consumption function when capital markets are imperfect. The permanent income hypothesis reconsidered", Oxford Economic Papers 25:160-172. Friedman, M. (1957), A Theory of the Consumption Function (Princeton University Press, Princeton, N J). Garcia, R., A. Lusardi and S. Ng (1997), "Excess sensitivity and asymmetries in consumption", Journal of Money, Credit and Banking, forthcoming. Ghez, G., and G.S. Beeker (1975), The Allocation of Time and Goods over the Life Cycle (NBER/ Columbia University Press, New York). Gokhale, J., L.J. Kotlikoff and J. Sabelhaus (1996), "Understanding the postwar decline in U.S. saving: a cohort analysis", Brookings Papers on Economic Activity 1996(1):315-390. Goodfriend, M. (1992), "Information aggregation bias", American Economic Review 82:508-5 l 9. Goodman, A., R Johnson and S. Webb (1997), Inequality in the UK (IFS, London). Gorman, W.M. (1959), "Separable utility and aggregation", Econometrica 27:469-481. Gorman, W.M. (1967), "Tastes, habits and choices", International Economic Review 8:218522. Greenspan, A., and D. Cohen (1996), "Motor vehicle stocks, scrappage and sales", Federal Reserve Board Finance and Economics Discussion Paper, No. 96-40. Grossman, S.J., and G. Laroque (1990), "Asset pricing and optimal portfolio choice in the presence of illiquid durable consumption goods", Econometrica 58:25-51. Guiso, L., T. Jappelli and D. Terlizzese (1992), "Earnings uncertainty and precautionary savings", Journal of Monetary Economics 30:307-337. Guiso, L., T. Jappelli and D. Terlizzese (1996), "Income risk, borrowing constraints and portfolio choice", American Economic Review 86:158-372. Hall, R.E. (1978), "The stochastic implications of the life cycle-permanent income hypothesis: theory and evidence", Journal of Political Economy 86:971-987. Hall, R.E. (1988), "Intertemporal substitution in consumption", Journal of Political Economy 96:339-357. Hall, R.E., and ES. Mishkin (1982), "The sensitivity of consumption to transitory income: estimate from panel data on households", Econometrica 50:461-481. Hansen, L.E, and K.J. Singleton (1982), "Generalized instrumental variables estimation of nonlinear rational expectation models", Econometrica 50:1269-1286. Hansen, L.P., and K.J. Singleton (1983), "Stochastic consumption, risk aversion and the temporal behavior of asset returns", Journal of Political Economy 91:249-265. Hayashi, E (1985a), "The effects of liquidity constraints on consumption: a cross section analysis", Quarterly Journal of Economics 100:183-206. Hayashi, E (1985b), "The permanent income hypothesis and consumption durability: analysis based on Japanese panel data", Quarterly Journal of Economics 100:1083-1116. Hayashi, E (1987), "Tests for liquidity constraints: a critical survey and some new observations", in: T.E Bewley, ed., Advances in Econometrics: Fifth World Congress, vol. Ii, 91-120. Hayashi, E (1996), "A review of empirical studies of household saving", mimeograph (Columbia University). Hayashi, E, and C.A. Sims (1983), "Nearly efficient estimation of time series models with predetermined but not exogenous instruments", Econometrica 51:783-792.
810
O.P. Attanasio
Hayashi, E, J. Altonji and L. Kotlikoff (1996), "Risk-sharing between and within families", Econometrica 64:261~94. Heaton, J. (1993), "The interaction between time-nonseparable preferences and time aggregation", Econometrica 61:353-386. Heaton, J. (1995), "An empirical investigation of asset pricing with temporally dependent preferences", Econometrica 63:681 718. Heckman, J.J. (1974), "Life-cycle consumption and labour supply: an exploration of the relationship between income and consumption over the life cycle", American Economic Review 64:188-194. Heckman, J.J., and R. Robb (1987), "Using longitudinal data to estimate age period and cohort effects in earnings equations", in: W.M. Mason and S.E. Fienberg, eds., Cohort Analysis in Social Research (Springer, Berlin). Hotz, V.J., EE. Kydland and G.J. Sedlacek (1988), "Intertemporal preferences and labor supply", Econometrica 56:335-360. Houthakker, H.S., and L.D. Taylor (1970), Consumer Demand in the United States: Analyses and Projections, 2rid edition (Harvard University Press, Cambridge, MA). Hubbard, R.G., J.S. Skinner and S.P. Zeldes (1994), "The importance of precautionary motives in explaining individual and aggregate saving", Carnegie-Rochester Conference Series on Public Policy 40:59-125. Hubbard, R.G., J.S. Skinner and S.P. Zeldes (1995), "Precautionary saving and social insurance", Journal of Political Economy 103:360-399. Hurd, M.D. (1989), "Mortality risk and bequests", Econometrica 57:779-813. Imrohoroglu, A. (1989), "Cost of business cycle with indivisibilities and liquidity constraints", Journal of Political Economy 100:118-142. Jappelli, T. (1990), "Who is credit constrained in the US economy?", Quarterly Journal of Economics 105:219-234. Jappelli, T., and E Modigliani (1997), "Is the age-saving profile consistent with the life cycle hypothesis?", mimeograph (MIT). Jappelli, T., and M. Pagano (1994), "Saving, growth and liquidity constraints", Quarterly Journal of Economics 109:83-110. Jappelli, T., J.-S. Pischke and N. Souleles (1997), "Testing for liquidity constraints using complementary data sources", Review of Economics and Statistics, forthcoming. Juster, ET., and R.P. Shay (1964), "Consumer sensitivity to finance rates: an empirical and analytical investigation", NBER Occasional Paper No. 88. Keane, M.P., and D. Rankle (1992), "On the estimation of panel-data models with serial correlation when instruments are not strictly exogenous", Journal of Business and Economic Statistics 10:1 9. Kennan, J. (1988), "An econometric analysis of fluctuations in aggregate labor supply and demand", Econometrica 56:317-334. Kimball, M.S. (1990), "Precautionary saving in the small and in the large", Econometrica 58:53-73. Kotlikoff, L.J. (1988), "Intergenerational transfers and savings", Journal of Economic Perspectives 2:41-58. Kotlikoff, L.J., and L.H. Summers (1981), "The role of intergenerational transfers in aggregate capital accumulation", Journal of Political Economy 89:706-732. Lam, P.S. (1991), "Permanent income, liquidity and adjustment of automobile stocks: evidence from panel data", Quarterly Journal of Economics 106:203-230. Lucas Jr, R.E. (1987), Models of Business Cycles (Blackwell, New York). Ludvigson, S. (1997), "Consumption and credit: a model of time-varying liquidity constraints", mimeograph (Federal Reserve Bank of New York). Ludvigson, S., and C. Paxson (1997), "Approximation bias in linearized Euler equations", mimeograph (Princeton University). Lusardi, A. (1996), "Permanent income, current income and consumption: evidence from two panel data sets", Journal of Business Economics and Statistics 14:81-90.
Ch. 11:
Consumption
811
Mace, B.J. (1991), "Full insurance in the presence of aggregate uncertainty", Journal of Political Economy 99:928-956. MaCurdy, T.E. (1981), "An intertemporal model of portfolio choice and human capital accumulation under uncertainty with extensions incorporating taxes, consumer durables, imperfections in capital markets and non separable preferences", Working Paper E-81-18 (Hoover Institution). MaCurdy, T.E. (1983), "A simple scheme for estimating an intertemporal model of labor supply and consumption in the presence of taxes and uncertainty", International Economic Review 24:265-289. MaCurdy, T.E., and T.A. Mroz (1989), "Measuring macroeconomic shifts in wages from cohort specifications", mimeograph (Stanford University). Manldw, N.G. (1982), "Hall's consumption hypothesis and durable goods", Journal of Monetary Economics 10:417-425. Mankiw, N.G., and S.P. Zeldes (1994), "The consumption of stock owners and the consumption of non stock owners", Journal of Financial Economics. Manldw, N.G., J.J. Rotemberg and L.H. Summers (1985), "Intertemporal substitution in macroeconomics", Quarterly Journal of Economics 100:225-253. Meghir, C., and G. Weber (1996), "Intertemporal non-separability or borrowing restrictions? A disaggregated analysis using a U.S. consumption panel", Econometrica 64:1151 1181. Modigliani, E (1988), "The role of international transfers and life cycle saving in the accumulation of wealth", Journal of Economic Perspectives 2:15-40. Modigliani, E, and A. Ando (1963), "The life cycle hypothesis of saving: aggregate implications and tests", American Economic Review 53:55-84. Modigliani, E, and R. Brumberg (1954), "Utility analysis and the consumption function: an interpretation of cross-section data", in: K.K. Kufihara, ed., Post-Keynesian Economics (Rutgers University Press, New Brunswick, NJ) 128-197. Moffitt, R. (1993), "Identification and estimation of dynamic models with a time series of repeated cross-sections", Journal of Econometrics 59:99-124. Novales, A. (1990), "Solving nonlinear rational expectations models: a stochastic equilibrium model of interest rates", Econometrica 58:93-111. O'Brien, A.M., and C.B. Hawley (1986), "The labor force participation behavior of married women under conditions of constraints on borrowing", Journal of Human Resources 21:267-278. Paulin, G., M. Boyle, R. Branch and R. Cage (1990), "Comparison of 1987-1988 CE integrated survey and PCE annual estimates", mimeograph (BLS). Phelan, C., and R.M. Townsend (1991), "Computing multi-period information constrained optima", Review of Economic Studies 58:853-881. Pischke, J.-S. (1995), "Individual income, incomplete information, and aggregate consumption", Econometrica 63(4, July):805-840. Pissarides, C.A. (1978), "Liquidity considerations in the theory of consumption", Quarterly Journal of Economics 92:279-296. Pollak, R.A. (1970), "Habit formation and dynamic demand functions", Journal of Political Economy, 78:745-763. Runlde, D.E. (1991), "Liquidity constraints and the pernaanent-income hypothesis: evidence from panel data", Journal of Monetary Economics 27:73-98. Sargent, T.J. (1978), "Rational expectations, econometric exogeneity and consumption", Journal of Political Economy 86:673-700. Seslnick, D. (1992), "Aggregate consumption and saving in the postwar United States", Review of Economics and Statistics 585-597. Seslnick, D. (1994), "Are our data relevant to the theory? The case of aggregate consumption", mimeograph (Rice University). Shea, J. (1995), "Union contracts and the life-cycle/permanent- income hypothesis", American Economic Review 85:186-200.
812
O.P. Attanasio
Skinner, J.S. (1988), "Risky income. Life cycle consumption and precautionary savings", Journal of Monetary Economics 22:237-255. Spynnewin, E (1981), "Rational habit formation", European Economic Review 15:91-109. Thurow, L. (1969), "The optimum lifetime distribution of consumption expenditures", American Economic Review 59:371-396. Tobin, J., and W.C. Dolde (1971), "Wealth, liquidity and consumption", Reserve Bank of Boston, Monetary Conference Series No. 5. Townsend, R.M. (1994), "Risk and insurance in village India", Econometrica 62:539-592. Weber, G. (1993), "Earnings related borrowing restrictions: empirical evidence from a pseudo panel for the UK", Annales d'Economie et de Statistique 29:157-173. Wilson, R. (1968), "The theory of syndicates", Econometrica 36:119-132. Zeldes, S.P. (1989a), "Consumption and liquidity constraints: an empirical analysis", Journal of Political Economy 97:305-346. Zeldes, S.E (1989b), "Optimal consumption with stochastic income", Quarterly Journal of Economics 104:275-298.
Chapter 12
AGGREGATE INVESTMENT
*
RICARDO J. CABALLERO MIT and NBER
Contents Abstract Keywords 1. Introduction 2. Basic investment t h e o r y and findings 2.1. Pre 1990s: Dismay 2.2. "Econometrics": Cost of capital and q matter 2.2.1. Long-run 2.2.2. Short-run 3. L u m p y and irreversible investment 3.1. Plant/firm level 3.1.1. Microeconomic adjustment: characterization 3.1.2. "Representative" problem 3.1.3. A detour: q-theory and infrequent investment 3.1.3.1. On the fragility of marginal q 3.1.3.2. When does q-theory work? 3.1.3.3. Taking stock 3.1.4. Another detour: Several misconceptions about irreversible investment 3.1.5. Adjustment hazard 3.2. Aggregation 3.3. Empirical evidence . . . . . 3.3.1. Microeconnmic data 3.3.2. Aggregate data 3.3.3. Pent-up demand 3.4. Equilibrium 4.
814 814 815 816 816 818 820 821 822 822 823 824 828 828 830 832 832 835 837 838 838 839 841 842
Entry, exit and scrapping
844
4.1. Competitive entry and irreversibility 4.2. Technological heterogeneity and scrapping
844 847
* I am grateful to Andrew Abel, Steve Bergantino, Olivier Blanchard, Jason Cummins, Esther Duffio, Eduardo Engel, Austan Goolsbee, Luigi Guiso, Kevin Hassett, Glenn Hubbard, John Leahy, Kenneth West, and Michael Woodford for many useful comments. I thank the NSF for financial support. Handbook of Macroeconomics, Volume 1, Edited by JB. Taylor and M. WoodJbrd~ © 1999 Elsevier Science B.V. All rights reserved
813
814 5. Inefficient investment 5.1. Informationalproblems 5.2. Specificityand opportunism 5.2.1. Genericimplications 5.2.2. Credit constraints 6. Conclusion and outlook References
R.J. Caballero 848 849 851 854 856 857 858
Abstract
The 1990s have witnessed a revival in economists' interest and hope of explaining aggregate and microeconomic investment behavior. New theories, better econometric procedures, and more detailed panel data sets are behind this movement. Much of the progress has occurred at the level of microeconomic theories and evidence; however, progress in aggregation and general equilibrium aspects of the investment problem also has been significant. The concept of sunk costs is at the center of modern theories. The implications of these costs for investment go well beyond the neoclassical response to the irreversible-technological friction they represent, for they can also lead to firstorder inefficiencies when interacting with informational and contractual problems.
Keywords sunk costs, irreversible investment, (S, s) models, adjustment hazard, aggregation, non-linearities, private information, incomplete contracts, pent-up investment
JEL classification: E22, D21, D23, E32
Ch. 12: Aggregate Investment
815
1. Introduction
Aggregate investment is an important topic. Cotmtries and firms are often judged by their performance along this dimension, since investment is viewed as providing hope for future prosperity. It is not surprising, therefore, that much has been written about investment. It is even less surprising that many surveys, and surveys of surveys, already exist ~. Rather than surveying the surveys of surveys, as one would expect from a handbook chapter, I have chosen to focus most of my discussion on that which is relatively new. The cost of this, of course, is that most of the theories I will discuss have not yet passed the test of time and are often only half the distance toward full development. Most, but not all, of the subjects I plan to discuss relate directly to investment in equipment and structures. Investing means trading the present for the future; as is the case, for example, when a firm purchases equipment, builds structures, trains its workers, restructures production, spends resources on R&D, hoards labor during a recession; or when a worker leaves a job to search for another one, invests in human capital; or when a country undergoes a structural adjustment, a trade liberalization or a fiscal reform. The more theoretical sections of this survey apply to most of these examples. Further, except for specific empirical results, a large part of the discussion about equipment and structures also applies to other forms of investment. The style of this review article is mostly empirical in early sections and mostly theoretical in later ones. This ordering is highly correlated with the chronology of research on investment. It follows that I am implicitly advocating for more empirical work on the newest theories. The layout of the chapter is as follows. Section 2 is rather traditional in content. It describes the basic investment theory and findings, taking the view that the pre 1990s empirical literature was in disarray with respect to finding a role for the cost of capital in investment equations. During the 1990s, however, we have learned from long run relationships and "natural experiments" that the cost of capital does indeed have significant effects on investment, although it is probably not the most important explanatory variable. Neither, I should add, is measured q. Section 3 describes what has been well known but largely ignored until recently: that microeconomic investment is lumpy and mostly sunk. It turns out that changes in the degree of coordination of lumpy actions play an important role in shaping the dynamic behavior of aggregate investment. The old concept of pent-up demand is back. This section contains a more detailed description of models and techniques than the others. It also attempts to clarify several misconceptions about the implications of these models. Section 4 is about equilibrium interactions and scrapping. It describes the consequences of free entry and different assumptions about the elasticity of the supply 1 See, for example, Chirinko (1993), Hassett and Hubbard (1996b), for excellent surveys of traditional investment equations.
816
R.J. Caballero
of capita~'~.for equilibrium investment anti, scrapping, :Vimage and putty-clay models are briefly mentioned as a natural environment in which to address the economic obsolescence issue. This concept is particularly relevant for understanding capital accumulation during episodes of rapid growth and after substantial shocks to the price of intermediate inputs. Section 5 discusses inefficient investment. The first part of the section deals with informational problems. Discontinuous action due to irreversibility and fixed costs are compounded by the presence of private information and create a powerful drag on investment. Inaction is a natural information trap, small information flows lead naturally to further inaction, and the feedback process goes on. Aggregate investment will appear too sluggish given the ex-post information of an econometrician, and it will probably be too slow in responding to new conditions relative to first and second best scenarios. The second part of this section describes how the sunk nature of investment, when combined with contractual incompleteness, can lead to underinvestment and, through general equilibrium, to a series of distortions in the scrapping margin and in the response of investment to aggregate shocks. Financial constraints are discussed within this context. The concept of rationing, the effects of underinvestment on complementary factors (and vice versa) and the relation between excessive capital/tabor substitution and investment are also part of this section. The issue of property rights and investment also fits very naturally here. Section 6 concludes.
2. Basic investment theory and findings 2.1. Pre 1990s: Dismay
Since very early on, economists have attempted to explain investment behavior using both scale and relative price variables, and since very early on, the former have been more successful than the latter. One of the first "theories" of investment was the accelerator model [Clark (1917)]. Scarcely a theory, the accelerator model is derived by inverting a simple fixed proportion production function and taking first differences. Unable to account for the serial correlation of investment beyond that o f output growth, this model was soon transformed into the flexible accelerator model [Clark (1944), Koyck (1954)]: n
I, = Z/3~AKT-r'
(2.1)
"~-0
where I denotes investment, the/3r's are distributed lag parameters, and K* is the desired, as opposed to actual, level of capital. In the simple fixed proportions world, K* can be written as a linear function of the output level, Y: K* = a Y
where a is a parameter.
Ch. 12: AggregateInvestment
817
The absence of prices (the cost o f capital, in particular) from the right-hand side of the flexible accelerator equation has earned it disrespect despite its empirical success. Jorgenson's (1963) neoclassical theory o f investment intended to remedy this situation. Starting from the optimization problem o f a perfectly competitive firm facing no adjustment costs, myopic expectations, and constant returns Cobb-Douglas technology, Jorgenson obtained the standard static first-order condition:
K = aY/Ck, where Ck stands for the cost of capital and a is now the share o f capital in a simple Cobb-Douglas production function. As with the accelerator model, this model was unable to account for the serial correlation o f investment, and so gave way to the flexible neoclassical model o f Hall and Jorgenson (1967), where
K* = aY/Ck,
(2.2)
was now used in Equation (2.1). Soon it was shown, however, that by constraining the coefficient o f the cost o f capital to be the same as the coefficient of out-put, this model imposed rather than found a role for the cost o f capital in the investment function. Eisner (1969) estimated a modified Hall and Jorgenson model which allowed for different coefficients on output and the cost o f capital and found no independent role for the cost o f capital. The cost o f capital's rise and fall from grace was not an unknown experience, however. Several decades before, authors such as Tinbergen (1939) and Meyer and Kuh (1957) had pointed out the dominance o f liquidity variables over interest rates for short run investment 2. None o f these are full theories of investment, rather they are theories conditional on the level o f output 3. The famous q-theory o f Tobin (1969) and Brainard and Tobin (1968) went one step further. They argued that investment should be an increasing function o f the ratio o f the value of the firm to the cost o f purchasing the firm's equipment and structures in their respective markets. This ratio, known as average q4, summarizes most information about future actions and shocks that are of relevance for investment 5. Indeed, average q would later be shown to be a sufficient statistic for investment in a wide variety o f scenarios. Thus, the new canonical investment equation became I = yq, where • is a strictly positive parameter. 2 See Chirinko (1993) for a more thorough review of the history of the debate over the role of the cost of capital, profits and output in investment decisions. 3 Things are even worse for the basic frictionless neoclassical model; it is ill defined as a full model because firm level output is not determined under constant reta.trns and perfect competition. 4 It is also often referred to as Tobin's q. 5 This includes the optimal path of output.
818
R.J. Caballero
The elegant theoretical contributions o f Abel (1979) and Hayashi (1982) connected the existing theories and partial theories. They showed that the neoclassical model with convex adjustment costs yields a q-model. This q, known as marginal q, should be interpreted as the marginal value o f an installed unit o f capital, which corresponds to the shadow value o f a trait o f capital in the firm's optimization problem. Further, Hayashi showed that (for price-taking firms) when the production function and adjustment cost function are linearly homogeneous in capital and labor, marginal and average q are equal. This is an important result from an empirical standpoint because marginal q is unobservable to the econometrician whereas average q is, in principle, observable to the econometrician 6. Soon, however, the q-model, along with expanded and ad-hoc "flexible-q" models (i.e. with additional lags o f q on the right-hand side), joined models based on the cost o f capital in their lack o f empirical success. Scale variables such as cash-flows always seemed to matter more in investment equations than q which, in principle, should have been a sufficient statistic 7. Figure 2.1, which reproduces figures 1 and 3 o f Hassett and Hubbard (1996b), helps us understand the statistical reasons for the problem. The bottom line is clear: In aggregate US data (which is probably representative o f many other data sets for this purpose) the unconditional correlation between cost o f capital and investment is low, and so is that between average q and investment. On the other hand, cash flows and sales's growth closely track aggregate investment. The 1980s discontent with respect to investment equations is probably well captured in Blanchard's (1986) discussion o f Shapiro's (1986) investment paper at Brookings: "... it is well known that to get the user cost to appear at all in the investment equation, one has to display more than the usual amount of econometric ingenuity, resorting most of the time to choosing a specification that simply forces the effect to be there ..." [my emphasis] Today, the first emphasized statement still holds, but the second one probably does not. This takes me to the next subsection. 2.2. "Econometrics": Cost o f capital a n d q matter
Econometric "ingenuity" eventually pays off, although this often means isolating that part o f the relationship which conforms with the theory, rather than explaining a 6 I have mixed feelings about this equivalence result, however. Not about its theoretical derivation, which is elegant and useful; rather about its abuse in empirical work. Too often, it is used to justify substituting average for marginal q on the right-hand side of investment equations, even though the assumptions required for the equivalence between the two are not nearly satisfied in the industry or firms studied (e.g. Compustat). This does not mean that average q should not be used, but it says that we should not pretend that the foundation for its use is beyond the basic intuition provided by Tobin (1969), and that the additional properties that hold for marginal q are to be expected from average q (e.g. sufficiency). 7 Fazzari et al. (1988) started a large literature documenting the role of these variables, even after conditioning for average q. I will return to the interpretation of these regressions later in the survey.
Ch. 12: Aggregate Investment o
o
819
o
o -
!
o
0 o
o
cq
1
i
"/"
:'.::::::5 :
~:~ --
.~- ~ ~
ixl
:+:+:.:.:.:.~ . . . . ........................
~
•.:.:.:::.:::::~ .~:::::::::::::::::::::::::::, k
e
~
]~.
v, o
. ..
:
!~!!!iiii:: ;
i!: ~
"~! i :-:+:+ ~ ' :~: : : : :
::i ~
-
°
~ o
I g :i
,'~
"
e~
u
~
o
820
R.J Caballero
substantial fraction of the movements of the left-hand side variable, or even relating a significant fraction of the volatility of the right-hand side variables to that of the left-hand side variable. In my view, this is the type of payoff obtained from the recent incarnations of the "traditional" line. Still, it is progress. Going from less to more ambitious, there are two generic developments I wish to discuss. First, ignoring high and medium frequency variations, we have come to the realization that the low frequency aspects of the data are not inconsistent with theories that assign an important role to the cost o f capital in determining the rate of capital accumulation. Second, there are distinctive episodes during which changes in the cost of capital are sufficiently dramatic that it becomes possible to demonstrate the importance of the cost of capital at higher frequencies as well. Other recent developments within the traditional line include the use of Euler equation procedures. In my view, and unlike the case in basic finance and consumption applications, these procedures are a form of morphine rather than a remedy: their lack of statistical power allows us to sometimes not see the problem. Since my goal is to discuss progress, I will skip results obtained with these procedures s. 2.2.1. L o n g - r u n
Many of the problems with investment equations have to do with the presence of complex and not well understood dynamic issues (more on this in the next sections). From early on, researchers have found it useful to think about investment in two steps: first, derive some simple expression for a "target" stock of capital, which I have called K* here; and second, model dynamics as a, possibly complex, function of contemporaneous and lagged changes in K*. It seems sensible, therefore, to start by asking whether the first step resembles what we expect before going into the difficult issues of timing. Taking logs on each side of Equation (2.2), disregarding constants, and relaxing the unit elasticity constraint on the cost of capital, yields k* - y
= yck,
(2.3)
where lower case letters denote logarithms and y is the parameter of interest. This expression cannot be estimated, of course, because k* is not observed. There is a simple argument based on cointegration, or a close small sample "cousin," which allows us to get around this observability problem, however. The whole purpose of deriving k* is to then model k as trying to keep pace with it. Thus, differences between these two variables should only be transitory (up to constants). I f k* and k are
See Oliner, Rudebusch and Sichel (1995) for a damaging evaluation of the statistical properties of these procedures.
Ch. 12: Aggregate Investment
821
sufficiently volatile (ideally with unit roots, in large samples), then we can "ignore" the discrepancy between these two variables in estimating y. Let k = k* + e, with c a stationary residual that captures transitory discrepancies between the two variables due to adjustment costs. Substituting this expression into Equation (2.3) yields an equation that can be estimated: k - y = yck + c.
(2.4)
Estimating this equation by OLS (the simplest o f the cointegration procedures) yields, for aggregate US data, an estimate o f y o f -0.4; significantly different from zero 9. We can do better, however. In any small sample, the cointegration argument will not take its full bite, and the estimates o f ~/will be affected by the correlation between regressors and e. Caballero (1994a) argues that this is particularly serious and systematic in models with slow adjustment (e.g. due to adjustment costs). The intuition behind this idea is simple. A partial adjustment mechanism implies that, in any finite sample, the variance o f K/Y ought to be less than the variance o f K * / Y , which means the lefthand side o f Equation (2.4) ought to be less volatile than the right-hand side of Equation (2.3), or yck lo. However, by the normal equations o f OLS, the estimated counterparts o f yck and e on the right-hand side o f Equation (2.4) must be orthogonal, so that the variance o f k - y is greater than the variance o f )ck, which is equal to the variance o f the estimated £'* - y . Since this inequality is in contradiction with what is implied by adjustment cost mechanisms, we conclude that the estimate o f y is biased toward zero. Using Monte Carlo simulations, I showed in that paper that this bias can be substantial, and then proceeded to correct it using Stock and Watson's (1993) procedure. I obtained an estimate o f ~/close to minus one, very near the neoclassical benchmark 11. 2.2.2. Short-run
Demonstrating a relationship between capital accumulation and the cost of capital at higher frequencies has required two changes in approach: first, a change in emphasis from aggregate to microeconomic data; and second, the use of natural
9 This estimate of g was obtained using US quarterly NIPA data for the period 1957:1-1987:4. Capital corresponds to equipment capital and cost of capital is constructed as in Auerbach and Hassett (1992). l0 Note that if adjustment costs are non-convex it is possible, at the microeconomic level, and in a sufficiently short sample, to have these relative volatilities reversed. This is not an issue for the aggregate data results discussed here. See the next section for more on non-convex adjustment cost models. 11 Similar estimates were obtained by Bertola and Caballero (1994) and Caballero, Engel and Haltiwanger (1995) with different data sets.
822
R.J Caballero
experiments, such as periods of tax reform, which present the econometrician with more accurate measures of (often substantial) changes in the cost of capital and q. Measures of q, for example, are not only very noisy because of the substitution of average q for marginal q, but also because there may be substantial "non-fundamental" movements in the value of firms, making average q mismeasured as well. However, there are certain episodes (e.g., periods of tax reform) when the movements in q are likely to be large, in a predictable direction, and for the "right reasons". As with cointegration, during those episodes problems with the residual can be more or less disregarded. The movement from aggregate to microeconomic data, by itself, has not done much to improve affairs. Although microeconomic data has improved precision, coefficients on the cost of capital and q in investment equations have remained embarrassingly small. Combined with the use of natural experiments, however, emphasis on microeconomic data has had much higher payoffs. The work of Cummins, Hassett and Hubbard (1994, 1996a) is salient in this regard. They isolate periods with important tax reforms and find that the coefficient on q is much larger in those episodes. Most recently, using firm level data for 14 developed countries, they find that while using standard instrumental variable procedures yields coefficients on q which range from 0.03 to 0.1, when contemporaneous tax reforms are included among the instruments, the estimates jump to a range between 0.09 to 0.8, with median and mean not very far from 0.5. In the USA, for example, the estimate of the coefficient on q jumps from 0.048 to 0.6512 Although these empirical results represent significant progress, there is still plenty of work needed to retrace the steps back to the aggregate and we must not forget that a substantial component of the variation in aggregate and microeconomic investment remains unexplained. The next sections describe progress on both fronts.
3. Lumpy and irreversible investment Investment is a flow variable, and as such it is very sensitive to obstacles. Investment is the by-product of the process by which the capital stock catches up with its desired level; but there are many paths leading the former to the latter. In this section I begin discussing some of these obstacles, emphasizing those that have had prominence in the recent literature. 3.1. Plant~firm level
The most basic form of friction occurs at the level of microeconomic units, and goes under the general heading of adjustment costs.
12 See Caballero (1994b) for a discussion of their results, interpretations and procedures.
Ch. 12: Aggregate Investment
823
3.1.1. Microeconomic adjustment: characterization
There are essentially three basic types o f adjustments observed at the establishment level: (a) ongoing frictionless flow (maintenance); (b) gradual adjustments (e.g. refinements and training dependent improvements); (c) major and infrequent adjustments 13 The structural literature o f the 1980s and before, based explicitly or implicitly on convex adjustment cost models (the quadratic adjustment cost model, in particular) dealt with (a) and (b). The implicit "hope" was that the smoothness brought about by aggregation would make disregarding the importance o f infrequent adjustments for individual units, unimportant for aggregate phenomena. Instead, the idea was to derive aggregate investment equations as coming from the solution to the optimization problem of a fictitious agent facing adjustment costs which only led to smooth adjustments o f type (a) and (b). Many authors disagreed with this strategy [e.g. Rothschild (1971)]; but for most the relative simplicity of the quadratic model was too enticing to resist. A combination of factors eventually led economists to revisit and reevaluate some o f the shortcuts which were in widespread use by the end o f the 1980S 14. First, there was frustration with the disappointing empirical results described above. Second, techniques which could handle models of lumpy investment became part of the modern economist's tool kit. And third, microeconomic data made the obvious even more apparent: microeconomic investment is extremely lumpy, and this lumpiness is unlikely to fully "wash out" at the aggregate level. The work o f Doms and Dunne (1993) was instrumental in stressing the last point. They documented investment patterns o f 12 000 plants in US manufacturing over the 17 year period, 1972-1989. Their findings are many, of which I have chosen to emphasize those that are most closely related to the purpose o f this survey. For each establishment, Doms and Dunne constructed a series o f the proportion o f the total equipment investment o f the establishment (over the 17-year period) made in each year. They found that on average the largest investment episode accounts for more than 25 percent o f the 17 year investment o f an establishment and that more than half o f the establishments exhibited capital growth close to 50 percent in a single year. They also note that the second largest investment spike often came next to the largest investment spike (right before or right after) suggesting that both spikes correspond to a single investment episode. 15 Combining the two primary spikes, they find that nearly
~3 Which may, in turn, have a time to build aspect. 14 Chronologies are never exact, of course. For example, Nickell had already discussed irreversible investment and many of its implications in 1978; but the mode did not move until much later. 15 All investment project may not be fully counted within one year since not all projects start on January 1, and certainly may take more than a few days to implement. One should not confuse "time to build" with the standard convex adjustment costs. Time to build is the optimal scheduling of a given lumpy project, while in the standard convex adjustment costs model the firm changes this project continuously and smoothly [see Caballero and Leahy (1996)].
R.J Caballero
824
40 percent of the sample investment of the median establishment probably corresponds to a single investment episode 16. Moreover, this is likely to be a lower bound on the lumpiness of investment since these numbers correspond to establishments that remained in the sample during the entire 17-year period. Adding entry and exit would undoubtedly make the evidence on microeconomic lumpiness even more apparent. As for evidence on the macroeconomic relevance of microeconomic lumpiness, Doms and Dunne offer several hints. First, using data on about 360 000 establishments for Census years 1977 and 1987, they document that about 18 percent of aggregate investment is accounted for by the top 100 projects. As a metric, only 6 percent of employment is in the top 100 employers, and less than 10 percent of production occurs in the top 100 producers. More importantly, they show that the time series correlation between aggregate investment and a Herfindahl index of microeconomic investments is very high (close to 0.45). They also constructed a series with the number of firms undergoing their primary investment spike during each year. They show that this measure, rather than the average size of these spikes, closely tracked aggregate investment 17. The subsections that follow describe models which are broadly consistent with these findings, and reviews structural evidence based on these models which lends further support to the view that microeconomic lumpiness is very important for aggregate investment dynamics.
3.1.2. "'Representative" problem There is by now a vast literature (and surveys of it) describing microeconomic models able to capture the essence of the lumpy and discontinuous adjustment highlighted by the evidence described above. Rather than giving a thorough presentation of the canonical model, I refer the interested reader to one of these surveys 18. Instead, I will only sketch the problem, mostly to characterize the nature of the solution and to develop notation which will prove useful later. Let actions and realizations of shocks evolve in discrete time, with time intervals, At. Having optimized over all inputs but capital during the period, a firm with stock of capital K and facing conditions 0, has a flow of profits net of rental cost of capital:
II(K, O)At = (KYO- rK)At
0 < ~ < 1,
(3.1)
where K is the firm's stock of capital; 0 is a profitability index that combines demand, productivity and wage shocks; r is the discount rate; and 7 represents the elasticity 16 Cooper, Haltiwanger and Power (1994) go one step further in characterizing infrequent lumpiness. Using a data set similar to that of Doms and Dtmne, they show that the probabilityof a firm experiencing a major investment spike is increasing in the time since the last major spike. This feature of the data is highly consistent with the implications of the models reviewed later in this section. 17 Where aggregate investmentcorrespondsto the investmentof all the establishmentsin their sample. 18 Dixit (1993) provides an excellent discussion of the basic problem and the mathematicaltechniques needed to solve it.
Ch. 12: AggregateInvestment
825
o f gross profits with respect to capital. It is less than one as long as the firm exhibits some degree o f decreasing returns or market power, which ! assume to be the case. For convenience, capital does not depreciate. It will also facilitate things to assume that increments in the logarithm o f 0 are i.i.d., and that time and the sample paths of 0 are "ahnost" continuous (i.e. At is small and changes in the value of 0 over an interval o f time At are small). I make these assumptions so I can, informally, use all the convenience o f Ito's lemma and Brownian motions. I choose to depart from strict continuous time, on the other hand, because discrete time will allow me to present this section in a more ratified manner. As in the previous section, we can find an expression for the static optimum of the stock o f capital, or "desired" capital: I I-y
K* = argmaxxH(K, 0) =
.
(3.2)
It is apparent from this expression that K* inherits the stochastic properties of 0, so it also follows a geometric random walk. Moreover, the measure o f capital "imbalance": Z=
K K*
'
also inherits the geometric random walk process, for any given K. Substituting this expression into Equation (3.1) and using Equation (3.2) to solve for 0 yields
H(Z,K*) = 7r (ZY - 7Z) K*
0 < 7 < 1.
(3.3)
In order to generate infrequent actions, the cost of adjusting the stock o f capital must increase sharply around the point of no adjustment. A cost proportional to the size of adjustment is enough to do so. Lumpiness requires a little more, for there must be an advantage in bunching adjustment; increasing returns in the adjustment technology is the standard recipe, o f which a fixed cost is the simplest. Let C(rI, K*) denote the cost o f adjusting the capital stock by K ' t / :
C(rI, K . ) = { A K ~ e O } K .
(cf+c~rl
/ cf-Cprl
if if
t/>0, t/<0,
(3.4)
where the K* term ensures that the relative importance of adjustment costs remains unchanged over time 19. Figure 3.1 illustrates an example of C(., .)/K*.
19 This goal would also be accomplished by K, but K* yields slightly simpler mathematical expressions at a low cost in terms of substantive issues. Also, I have allowed proportional costs to differ with respect to upward and downward adjustments in order to talk later about the irreversible investment case; for this purpose, I could have done it equally well through asymmetric fixed costs. Allowing for both forms of asymmetries simultaneously is a trivial but uninteresting extension.
826
R.J. Caballero
\ J Cf
<
)rl
Fig. 3.1. Adjustment costs.
The problem of the firm can be characterized in terms of two functions of Z and K*: V(Z,K*) and ~'(Z, K*). The function V(Z,K*) represents the value of a firm with imbalance Z and desired capital K* if it does not adjust in this period, and V(Z,K*) is the value of the firm which can choose whether or not to adjust. Thus, v ( z , , I,:?) = rt(z,, I
(3.5)
~'(Zt,K[)=max {V(Zt,K[),m~x {V(Zt + rI,K[)-CQI, K[)} }.
(3.6)
and:
The nature of the solution of this problem is now intuitive. Given the function
V(Z, K*), Equation (3.6) provides most of what is needed to characterize the solution. First, since C is positive even for small adjustments, it is apparent that when Z is near that value for which V(Z,K*) is maximized, the first term on the right-hand side of Equation (3.6) is larger than the second term; that is, there is a range of inaction. Second, since both adjustment costs and the profit function are homogeneous of degree one with respect to K*, so are V and ~'. Thus, it is possible to fully characterize the solution in the space of imbalances, Z. Among other things, this implies that the range of inaction described before, is fixed in the space of Z. Let L denote the minimum value of Z for which there is no investment, and U the maximum value for which there is no disinvestment; thus the range of inaction is (L, U). Third, conditional on adjustment, changes must not only be large enough to justify incurring the fixed cost, but also the (invariant) target points must satisfy Vz(/) = Cp
(3.7)
and
Vz(u) = -Cp, where Vz is the derivative of
(3.8)
V with respect to Z, while 1 and u denote the target points from the left and right of the inaction range, respectively. These first-order
827
Ch. 12." AggregateInoestment "-.. ............."..... '...........
el
I ..../........
V ( z, K*) / K*
i" <
> L
1
u
U
Fig. 3.2. Value fimction. conditions are known as "smooth pasting conditions," and simply say that, conditional on adjustment taking place, it must cease when the value of an extra unit of investment (or disinvestment) is equal to the additional cost incurred by that action. There are two additional smooth pasting conditions:
Vz(L) = Cp
(3.9)
and v z ( u ) = -Cp,
(3.10)
which ensure no expected advantage from delaying or advancing adjustment by one At around the trigger points. These smooth pasting conditions are enough to find the optimal (L, l, u, U) rule, given the value function. In order to find the latter, however, we need to go back to Equation (3.5). Standard steps reduce this equation, in the interior of the inaction range, to a second-order differential equation. The two boundary conditions required to find V are obtained from equalizing the two terms on the right-hand side of Equation (3.6):
V(L,K*) = V ( I , K * ) - (cy + c p ( l - L ) ) K*,
(3.11)
V(U,K*) = V ( u , K * ) - (of + cp(U - u)) K*,
(3.12)
which simply say that since the investment rule (optimal or not[) dictates that once a trigger point is reached, adjustment must occur at once, the only difference in the value of being at trigger and target points must be the adjustment cost of moving from the former to the latter. Figure 3.2 illustrates the value function. Smooth pasting says that the tangents at L and l have slope Cp, while those at U and u have slope -Cp. Value matching says
828
R.J. Caballero
that the value function evaluated at the target minus the value function evaluated at the trigger point is equal to the variable cost paid at adjustment plus the fixed cost (all these normalized by K* in the figure). There are a few particular cases which are worth highlighting because they appear often in the literature: (1) If there is no variable cost of investment, once the adjustment decision has been taken, adjustment from both sides is complete since the marginal cost of adjustment is zero. Thus, the (L, l, u, U) rule reduces to an (L, c, U) rule, where c is the common target for investment as well as disinvestment, and is that value which maximizes V(Z, K*) for any K* 2o. (2) If there are variable costs but no fixed cost, there is no reason for adjustment to be lumpy, for there are no increasing returns in the adjustment technology 21. Once the boundaries of the inaction range, L and U, are reached, the firm adjusts just enough to avoid crossing outside the inaction range; that is L and U become reflecting barriers. (3) If there is a large (not necessarily infinite) cost to disinvestment, then investment becomes irreversible. In the absence of investment costs, the investment rule reduces to a single reflecting barrier L, which is to the left of one (reluctance to invest). This is the standard irreversible investment case.
3.1.3. A detour." q-theory and infrequent investment One of the main manifestations of the empirical failure o f previous investment theories, has been the difficulty in finding either a significant and sizable role for q, or evidence that it is a sufficient statistic for investment. Do the theories studied in this section help explain these empirical failures? I see two reasons to believe so. The first one is rather negative, q-theory is no longer robust in our setting, so there :are many scenarios where we should not expect it to work. The second one is more positive. In the subclass o f models where it does work, the functional form relating q and investment is likely to be highly non-linear, thus quite different from the standard linear regressions leading to the rejection o f q-theory.
3.1.3.1. On the fragility of marginal q. It is apparent from the lack of global concavity o f the value function in Figure 3.2, that traditional q-theory is not likely to work in the presence o f jumps. Caballero and Leahy (1996) develop the argument in detail, which I summarize below.
20 Note that in general c ~ 1. That is, the optimal dynamic target is generally different from the static one. 21 And we have already assumed that shocks are "small" in any given At.
829
Ch. 12." Aggregate Inoestment
(a)
lqw...-....-..---.---.....~ J ~ ~ q m 1+ C+p S
qm(z)
il-c<
L
1
u
U
(b) qm
1 + C+p
1 - c-p
>
<
U=u
L=I
Fig. 3.3. Marginalq. The value of the firm is equal to K + V, thus marginal q is 22 qM(Z) = 1 + Vx = 1 + K~.
(3.13)
Figure 3.3a plots qM against the imbalance m e a s u r e Z 23. Smooth pasting implies that qM must be the same at trigger and target points (because Vz must be the same at trigger and target points); if there are jumps, these are points very far apart in state
22 Recallthat P was definedas the presentvalueof profitsnet of adjustmentcosts and interestpayments on capital. 23 See, for example, Dixit (1993) for a characterizationof the (L, l, u, U) solutionin terms of a similar diagram.
830
R.J. Caballero
space. Two points with the same value of qM lead to very different levels of investment (zero and large). Moreover, since the value function becomes linear outside the inaction range, all points outside the inaction range (on the same side) have the same q~t, and all of them lead to different levels of investment. It is apparent, therefore, that the function mapping qM into investment no longer exists. Worse, in between trigger and target points, the relation between qM and Z is not even monotonic. What is happening? Marginal q is the expected present value of the marginal profitability o f capital. Far from an adjustment point, it behaves as usual with respect to the state o f the firm: if conditions improve, future marginal profitability of capital rises, and so does q~. Close to the investment point, on the other hand, the effect of a change in the state of the firm over the probability o f a large amount of investment in the near future dominates. An abrupt increase in the stock of capital brings about an abrupt decline in the marginal profitability o f capital as long as the profit function is concave with respect to capital 24. Thus, an improvement in the state of the firm makes it very likely that it invests in the near future, reducing the expected marginal profitability o f capital in the near future, thus lowering the value of an extra unit of installed capital. Caballero and Leahy (1996) show that adding a convex adjustment cost to the problem does not change the basic intuition of the mechanism described above. They also show, somewhat paradoxically, that average q, which is often thought o f as a convenient albeit inappropriate proxy for marginal q, turns out to be a good predictor of investment even in the presence of fixed costs, although it is no longer a sufficient statistic, except for very special assumptions about the stochastic nature of driving forces. 3.1.3.2. When does q-theory work?. The failure o f q-theory described above is rooted in the presence of increasing returns in the adjustment cost function (3.4). This feature of the adjustment technology is responsible for the loss of global concavity of the value function, which is behind the non-monotonicity o f marginal q 25. Monotonicity of qM inside the inaction range is recovered by dropping the fixed cost from Equation (3.4), as was done in cases 2 and 3 in Section 3.1.2. Figure 3.3b portrays this scenario. Adjustment at the trigger points no longer involves large projects, thus proximity to these triggers no longer signal the sharp changes in future marginal profitability of capital which were responsible for the "anomalous" behavior of qM 26 There is still the issue that in the (very) rare event that a firm finds itself outside the inaction range it will adjust immediately to the trigger, at a constant marginal cost, so
24 Which I take to be the standard case. z5 Indeed, value functions for (S, s) models are often only K-concave. 26 Of course, once at the trigger, large projects may result from the accumulated and - more or less continuous response to a sequence of shocks with the same sign. But this does not give rise to a sharp change in profitability since investment occurs only in response and to offset new, as opposed to accumulated, changes in profitability.
Ch. 12: AggregateInvestment
831
different levels of investment are consistent with the same value o f qM. This is easily remedied by adding a convex component to the adjustment cost function27:
c(.,K*) =
0tK* {c l,I +c l.I
> 1.
(3.14)
This is essentially what Abel and Eberly (1994) do 28. Absent the advantage of lumping adjustment brought about by the presence o f fixed costs, standard q-theory is recovered whenever the firm invests. Provided adjustment takes place, the firm equalizes the marginal benefit of adjustment and the marginal cost o f investing, which is now an increasing function o f adjustment: qM = 1 + sgn(r/)
(Cp +/3Cqlr/l~-l) ,
for t / ~ 0. By setting ~ to zero, we can obtain the boundaries o f inaction in qM_space. Indeed, investment will not occur if
1-cp
27 Which, at the same time, makes transitions outside the inaction range less rare. 28 Needless to say, it is trivial to add asymmetries to the adjustment cost function. But that is beside the point of this section. 29 Alternatively, if one assumes perfect competition and constant returns to scale, the profit function becomes linear with respect to capital (if the other factors of production can be adjusted at will), so changes in investment do not feed back into q. In this extreme case, the modified (i.e. with an inaction range) q-theory works well even in the presence of traditional fixed costs.
832
R.J Caballero
range relevant for different types of investments could explain the negative BarnettSakellaris finding. 3.1.3.3. Taking stock. One may be inclined to conclude from this section that before going ahead with q-theory one should check whether investment literally exhibits jumps or not. This is not the lesson I draw, however. For once, this is not right. It is not difficult to add a time to build mechanism such that a lumpy project is decomposed into a fairly smooth flow, without altering the argument of why marginal q fails in the presence of fixed costs. But more importantly, I suspect the main lesson is one of modesty. I doubt that researchers will often find the required data and/or patience to determine whether one scenario or the other holds. In this case, we might as well acknowledge that the relationship between marginal q and investment is not robust, and that average q is unlikely to be a sufficient statistic for investment. Of course it is important to include variables that capture knowledge of the future on the right-hand side of investment equations, but we should avoid reading "too much" from these regressions. 3.1.4. Another detour." Several misconceptions about irreuersible investment As I mentioned before, when describing the special case of irreversible investment, the regulation barrier, L, is to the left of one. That is, investment occurs only when the stock of capital is substantially below the frictionless stock of capital. Alternatively, investment occurs when the marginal profitability of capital is substantially above the cost of capital. This is the famous "reluctance to invest" result. There are several misconceptions about the implications of this "reluctance" result. I will mention three of them. It is often said that, (a) reluctance implies that, in the presence of irreversibility, the firm accumulates less capital; (b) since reluctance rises with uncertainty (the regulation point moves further to the left), more uncertainty implies less capital; and (c) standard present value techniques are inappropriate because reluctance reflects the value of the "option to wait" for more information before irreversibly sinking resources and this is not taken into account by the standard formulae. In order to show the fallacious nature of the first statement, it is useful to go back to our canonical problem and simulate the path o f the (log of) stock of capital of a firm facing no irreversibility constraint. Panel (a) in Figure 3.4 does so for a random realization of the path of 0. Panel (b) in the figure shows the corresponding path of the marginal profitability of capital, which is equal to the constant - frictionless - cost of capital, r 3°. Imagine now imposing an irreversibility constraint on the firm, but assume that the firm does not modify its "frictionless" investment rule whenever it can invest. This is
3o These figures are from Caballero (1993a).
833
Ch. 12: Aggregate Investment (a)
(b)
[I
~r
~L IlL o;
~L ~o s
lo
rs
20
~
~o
~
40
4S
l
~0
l
l
l
l
l
,
t~ne
l
l
P~E~ ]
l
tlme
(c)
(d)
I~rg. Prof.
~o
;
;
;
g
,;
~
io ,',
~
r
i
i
i
tlme
'i
| .............
i Is
t
I
i ............ I?'--
t Io
r
(f)
Al
i ~
i
tlme
(e)
o
i
i zo
r zls
time
i ao
l
i ~
- -
/
In Kf
- - -
In K d
--
InK i 4o
tl 4s
c --
/
c+h
Mar'g. so
:
,_
.:
,
,
5
I0
m
~o
J 2'~
time
Fig. 3.4. Reluctance and its counterpart.
t ~
~
~ 4o
Prof i 45
"
J
so
834
R.J Caballero
portrayed in panel (c) of the figure. The solid and dashed lines represent the actual and frictionless stocks o f capital, respectively. It is apparent that the firm would, on average, have too much capital, for it would have the same stock o f capital in good times, but too much in bad times. The counterpart o f this is in panel (d), which shows that on average the marginal profitability of capital is below the cost o f capital. Reluctance to invest in good times is an optimal response attempting to offset the natural tendency to over-accumulate capital induced by the irreversibility constraint. Panel (e) illustrates this point. The solid and dashed lines represent the same variables as in panel (c), while the dotted line illustrates the target stock of capital when the firm behaves optimally. The counterpart o f the negative value of ln(Ka/Kf ) is a positive constant h in the marginal profitability o f capital required for investment to take place (panel f). It is apparent that whether the stock o f capital is on average higher or lower than without the irreversibility constraint is unclear; the firm has too little capital during good times but too much during very bad times. A precise answer depends on things about which we know little, and which may turn out to yield only secondorder effects 31. It is now easy to see the fallacious nature of the second statement. More uncertainty raises reluctance precisely because it raises the need to reduce the extent o f excessive capital during the now deeper recessions. Without raising reluctance, an increase in uncertainty would raise the average stock o f capital in the presence of irreversibility constraints. This occurs because there would now be greater capital accumulation during extremely good times which would not be offset by large disinvestment during extremely bad times 32. The third misunderstanding is o f a different nature. In my view, it is the result of insightful but, unfortunately, abused language. First, what is right: there is nothing mysterious about irreversibility constraints as a mathematical problem. Dynamic programing works, in the same way it does with other, more traditional, adjustment frictions. This means that present value formulae, using the correct calculation of future marginal profitability of capital also work. O f course such calculations must be performed along the optimal investment path, constraints included! What is wrong: the standard analysis must be modified to consider the value of the "option to wait".
3a See Bertola (1992), Caballero (1993a), Bertola and Caballero (1994) for early discussions of this issue and of the related uncertainty-investment misconception. More recently, Abel and Eberly (1996b) have formalized these claims and made them more precise. 32 This does not mean that one cannot construct scenarios where an increase in uncertainty reduces investment. For example, if there is an increase in perceived future uncertainty, the investment threshold may jump today - i.e., before the variance of shocks does - resulting in an unambiguous decline in investment. Also, one should not confuse changes in uncertainty with changes in the probability of a bad event. The latter links increases in uncertainty to a reduction in expected value, an entirely different and more straightforward effect on investment. One can find traces of this confusion in the (informal) credibility literature.
Ch. 12: Aggregate Investment
835
As we have seen, there is no need to do so. However, one may choose to follow an alternative path, in which one starts by evaluating the future marginal profitability o f capital without considering the effect o f future optimal investment decisions on marginal profitability. This "mistake" can then be "corrected" with a term that has an option representation. This alternative way o f doing things is akin to the arbitrage approach in finance, and it was nicely portrayed in Pindyck (1988). The confusion arises, in my view, from mixing the language in the two approaches 33. A related claim exists for a once and for all project (as opposed to incremental investment). It is said that the simple positive net present value rule used in business schools to decide whether a project should be implemented does not hold because it does not consider the option to wait and decide tomorrow, when more information is available. Since I have never taught at a business school I cannot argue directly against that claim. However, if the issue is whether to invest today or tomorrow, the right criterion has never been invest if NPV is positive - at least that is what we teach economics undergraduates. This is a case of mutually exclusive projects, thus the fight criterion has always been to compare their net present value and take that with the highest NPV, provided it is positive. If investment is irreversible, the project invest tomorrow has a lower bound at zero (because investment will not occur if N P V looks negative tomorrow), which the project invest today does not. Thus, other things equal, irreversibility necessarily makes investing tomorrow more attractive than investing today. 3.1.5. Adjustment hazard
At a qualitative level, the (L, l, u, U) models described above capture well the nonlinear nature o f microeconomic adjustment. Maintenance expenditures aside, investment is mostly sporadic and often lumpy; scarcely reacting to small changes in the environment but abruptly undoing accumulated imbalances when they become sufficiently large, and with possibly significant asymmetries between investment and disinvestment. At an empirical level, however, these characterizations are too stark. For reasons, some o f which we understand and most of which we do not, firms respond differently to similar imbalances over time and across firms. Caballero and Engel (1999) propose a probabilistic instead o f a deterministic adjustment rule. Rather than having a clear demarcation between regions o f adjustment and inaction, they model a situation where large imbalances are more likely to trigger adjustment than small ones 34.
33 See Bertola (1988) for one of the first discussions of this issue in the economics literatme. There is also a related discussion in applied mathematics; see, for example, E1 Karoui and Karatzas (1991). Abel et al. (1996) have recently revisited and expanded the discussion on the relation between the two approaches. 34 Another advantage of this approach is that it nests linear models as the probability of adjustment becomes independent of Z.
R.J. Caballero
836
There are many formal motivations for such an assumption. A particularly simple one, pursued by Caballero and Engel (1999), is to assume that cf in the adjustment cost fimction (3:4) is an i.i.d, random variable, both across firms and time. Although technically more complex, the nature of the problem is not too different from that of the simpler (L, l, u, U) model. Let ~o denote the random fixed cost, and G(w) its time invariant distribution. It is possible to characterize the problem of the firm in terms of two functions similar to those used before: V(Z, K*) and ~'(Z, K*, w), the value of a firm with imbalance Z, desired capital K*, and realization of fixed adjustment cost w. In particular, V(Z,K*) is the value o f the firm provided it does not adjust, while [/(Z,K*, w) is the value o f the firm when it is left free to choose whether or not to adjust. Thus,
V(Zt, 1£7) = H(Zt, K t )At + (1 - rAt)Et [V(Zt+At,K~+At,Wt+At,)],
•
V(Zt,K; ,~o)-max
{ V(Zt,K[),max {V(Zt+ tl, K[)-C(tI, K[,wt)}
}
(3.15)
.
(3.16)
Not surprisingly, the nature of the solution is not too different from that o f the (L, l, u, U) case. Indeed, conditional on c~ it is an (L, l, u, U) rule, although there are additional intertemporal considerations, since the firm weighs the likelihood of drawing higher or lower adjustment costs in the future. Without conditioning on ~o, it is a probabilistic rule in the space of imbalances. In order to simplify the exposition, I will suppress the proportional costs. Thus, conditional on adjustment, the target point is the same regardless of whether the firm is adding or subtracting to its stock of capital (i.e. l = u = c). Moreover, let me define a new imbalance index centered around zero: x - In (Z/c). The probability of adjustment rises with the absolute value of x because there are more realizations of adjustment costs which justify adjustment. This is the sense in which the (S, s) nature of the simpler models is preserved. Let A(x) denote the function describing the probability of adjustment given x, and call it the adjustment hazard function [see Caballero and Engel (1999)]. Given an imbalance x, it is no longer possible to say with certainty whether or not the firm will adjust, but the expected investment by the firm is given by E
11, ]
K/t x = (e ~ -
1)A(x) ~ - x A ( x ) ,
(3.17)
which is simply the product of the adjustment if it occurs, and the probability that adjustment occurs 35. Aggregation is now only a step away. 35 Caballero and Engel (1999) refer to A(x) as the "effective hazard" to capture the idea that, through a normalization, it also captures scenarios where adjustment, if it occurs, is only a fraction of the imbalance X.
Ch. 12: AggregateInvestment
837
3.2. Aggregation Unlike microeconomic data, aggregate investment series look fairly smooth. Large microeconomic adjustments are far from being perfectly synchronized. The question arises, and this was the maintained hypothesis during the 1980s, as to whether aggregation eliminates all traces of lumpy microeconomic adjustment. The answer is a clear no. Doms and Dunne's evidence on the role of synchronization of primary spikes in accounting for aggregate investment, and on the high time series correlation between aggregate investment and a Herfindahl index of microeconomic investments, as well as the more structural empirical evidence reviewed in the next section, support this conclusion, With the setup at hand, aggregation proceeds in two easy steps. To simplify things further, I will define the aggregate as the behavior of the average, rather than the weighted average 36. Both steps rely on having a large number of establishments, so that laws of large numbers can be applied. In the first step, one takes as the average investment rate (i.e. the ratio of investment to capital) of establishments with more or less the same imbalance of capital, x, the conditional expectation of this ratio given in Equation (3.17):
It ,~x = -xA(x),
(3.18)
g)
where the superscript x denotes the aggregate for plants with imbalance x. The second step just requires averaging across all x. Let f(x, t) denote the cross sectional density of establishments' capital imbalances just before investment takes place at time t. Then the aggregate investment rate at time t, (It/Kt) A, is
( It ~A = - f xA(x)f(x,t)dx.
g)
(3.19)
This is an interesting equation, with macroeconomic data on the left and microeconomic data on the right-hand side. An example serves to illustrate this aspect of the investment equation: If the adjustment hazard is quadratic,
A(x) = )~o+ ;qx + )~2x2, Equation (3.19) reduces to I, ~A = __~r~,-(1)__~lXt(2) g)
_ •2X(3),
(3.20)
where Xt(1), Xt(2) and Xt(3) denote, respectively, the first, second and third moments of the distribution of establishments' imbalances. 36 Using microeconomicdata, Caballero, Engel and Haltiwanger (1995) show that in US manufacturing this approximationis. See Caballero and Engel (1999) for a detailed discussion of the issue.
838
R.J. Caballero
If t l l = ,~2 = 0, the model only has aggregate variables, both on the right and left• hand side. Indeed this case corresponds to the celebrated partial adjustment model, and it also coincides with the equation obtained from a quadratic adjustment cost model with a representative agent [e.g. Rotemberg (1987) and Caballero and Engel (1999)]. If either )!.1 or/~2 is different from zero, however, information about the cross sectional distribution o f imbalances is needed on the right-hand side. All the microeconomic models discussed in this section yield situations where higher moments o f the cross sectional distribution play a role. 3.3. Empirical evidence There are two polar empirical strategies used to estimate Equation (3.19), with a continuum o f possibilities in between. At one extreme, one can use microeconomic data to construct all the elements on the right-hand side; in particular one can construct the path o f the cross sectional distribution and estimate the adjustment hazard as an accounting identity, or estimate a parametric version o f it. At the other extreme, one can attempt to learn about the adjustment hazard from aggregate data only, by putting enough structure on the stochastic processes faced by firms and by starting with a guess on the initial cross sectional distribution. Both avenues have been explored, with similar results along dimensions they can be compared. 3.3.1. Microeconomic data Caballero, Engel and Haltiwanger (1995) use information on approximately seven thousand US manufacturing plants from 1972 to 1988 to empirically recreate the steps described in the previous section 37. The figures below were constructed with data from that paper 3s. The procedure used by Caballero, Engel and Haltiwanger is essentially accounting, except for the first step, which requires estimating a series of frictionless capital for each establishment, and, from this, a m e a s u r e ofxit (an index of the capital imbalance o f firm i at date t). The series o f frictionless capital were constructed using a procedure similar to that described in Section 2, but cointegration regressions were run at the individual establishment level 39. The average estimate of the long run elasticity of capital with
37 As in Doms and Dunne (1993), we used data from the Longitudinal Research Datafile (LRD). The LRD was created by longitudinally linking the establishment-level data from the Annual Survey of Manufacturing. The data used in that paper is a subset of the LRD, representing all large, continuously operating plants over the sample. The data sets include information on both investment and retirement of equipment (i.e. the gross value of assets sold, retired, scrapped, etc. 38 Warning: x in that paper corresponds to ~ in this survey. 39 The results reported there constrained the coefficient on the elasticity of capital with respect to its cost to be equal across two-digit sectors, but all principal results were robust to different constraints and specifications.
Ch. 12: Aggregate lnvestment
839
0.4
0.3
0.2
0.1
I -2
-1
0
1
o.o
Fig. 3.5. Adjustment hazard.
respect to its cost was close to minus one, with substantial heterogeneity across sectors. The measures ofxit, up to a constant, correspond to the difference between actual and estimated frictionless capital4°. There are two results from that paper which seem particularly relevant for this section of the survey. One on the shape o f the adjustment hazard, and the other on the consequences o f this shape for aggregate dynamics. I discuss the former here and the latter after the next subsection. Figure 3.5 reports the average adjustment hazard constructed from simply averaging the investment rates o f establishments in a small neighborhood o f each x, divided by minus the corresponding x. The hazard is clearly increasing for positive adjustment (i.e. expected investment rises more than proportionally with the shortage o f capital), as one would expect from the nonlinearities implied by (L, 1, u, U) type models, and unlike the linear models which imply a constant hazard. The estimated hazard is also very low for negative changes, suggesting irreversibility 41 . Following a similar procedure, Goolsbee and Gross (1997) have studied very detailed and high quality microeconomic data on capital stock decisions in the US airline industry. They found clear evidence of behavior consistent with non-convex adjustment costs.
3.3.2. Aggregate data I f only aggregate data are available, one needs to make some inference about the path o f the cross sectional distribution of capital imbalances, f ( x , t), from these data. This is possible if enough structure is placed on the stochastic processes faced by firms.
40 The establishment specific constants were estimated as the average gap between their respective kit and k/t for the five points with investment closest to their median (broadly interpreted as maintenance investment). 41 Retirements include assets sold, scrapped or retired. It is possible that observations are very noisy on this side. The right-hand side of the figure should therefore be viewed with some caution.
840
R.J Caballero
The basic operations affecting the evolution o f f ( x , t) are quite simple. Given the density, or histogram, at time t - 1, there are three basic operations in its transformation into f ( x , t). First, aggregate shocks and common depreciation shift everybody's x in the same direction; second, given the adjustment hazard, the density at each x is split into those that stay there and those that adjust and move to some other position in the state space (in the simplest case, they move to x = 0, but this is not necessary); and third, idiosyncratic shocks hit, which amounts to a convolution o f the density resulting from the second step and that o f idiosyncratic shocks. Making distributional assumptions about idiosyncratic shocks and the initial cross sectional distribution, is enough, therefore, to keep track o f the evolution o f the cross sectional density, conditional on aggregate shocks and for a given adjustment hazard. In continuous time, and assuming Brownian motions for aggregate and idiosyncratic shocks, Bertola and Caballero (1994) estimated the irreversible investment model, and Caballero (1993b) did so for the (L,/, u, U) model. 42 In discrete time but continuous state space, Caballero and Engel (1999), estimated the more general adjustment hazard model described in the previous sections, assuming that both idiosyncratic and aggregate shocks were generated by log-normal processes. We did so for US manufacturing investment in equipment and structures (separately) for the 1947-1992 period 43. The results were largely consistent with those found with microeconomic data by Caballero, Engel and Haltiwanger (1995). There is clear evidence o f an increasing hazard model; that is, the expected adjustment o f a firm grows more than proportionally with its imbalance 44. An important point to note is that since only aggregate data were used, these microeconomic nonlinearities must matter at the aggregate level, for otherwise they would not be identified. The improvement in the likelihood function from estimating this non-linear model rather than a simple linear model (including the quadratic adjustment cost model) was highly significant, and so was the improvement in the out-of-sample forecasting accuracy 45.
42 See Bertola and Caballero (1990) for a discrete time and space model and estimation procedure. 43 Another important difference between this and the previous papers is that estimation was done by a single step maximum likelihood procedure, which did not require estimating frictionless capital separately. 44 We did not allow for asymmetries between ups and downs but this turned out not to matter much because given the strong drift induced by depreciation and the small value we found for the hazard in an interval around zero, the model effectively behaves as if investment is irreversible (i.e. It is very asymmetric around the median value of x and with a very small hazard for values of x much higher than that.). 45 For within sample criteria, we ran Vuong's [Rivers and Vuong (1991)] test for non-nested models, and we rejected strongly the hypothesis that both models (linear and non-linear) are equally close to the true model against the hypothesis that the structural (non-linear) model is better. For out-of-sample criteria, we dropped the last ten percent of the observations and evaluated the Mean Squared Error of the one step ahead forecasts for these observations [see Caballero and Engel (1999)].
841
Ch. 12." Aggregate Investment 3.3.3. Pent-up demand
What is the aspect of the data that makes these models better than linear ones at explaining aggregate investment dynamics? The simplest answer comes from an example. Suppose that a history of mostly positive aggregate shocks displaces the cross sectional distribution of imbalances toward the high part of the hazard. Such a sequence of events will not only lead to more investment along the path but also to more pent-up investment demand; indeed, the cross sectional distribution represents unfulfilled investment plans. But as unfulfilled demand "climbs" the hazard, more units are involved in responding to new shocks; incremental investment demand is more easily boosted by further positive aggregate shocks, or depressed by a turnabout of events. This time-varying/history-dependent aggregate elasticity plays a very important role for aggregate investment dynamics. It captures the aggregate impact of changes in the degree of synchronization of large adjustments; already an important explanatory variable in Doms and Dunne's less structural study. In particular, their observation that the Herfindahl of investment rises during episodes of large aggregate investment matches well this mechanism. Using the path of cross sectional distributions and hazards described at the beginning of this subsection, Caballero, Engel and Haltiwanger (1995) found an important role for the mechanism described above. Figure 3.6 depicts the relative contribution of the time-varying aggregate elasticity for aggregate investment dynamics. A positive value reflects an amplification effect (micro-nonlinearities exacerbate the economy's response to aggregate shocks), while a negative value reflects an offsetting effect. The impact of the time-varying elasticity appears to be especially large after the tax-reform of 1986 (when tax-incentives for investment were removed). The decline in investment was 20 percent greater than it would have been under a linear model.
Fraction 0.15 0.10 / 0.05 0 - 0.05
-0.10 -0.15 I
1976
1978
I
1980
I
I
1982
1984
1986
Fig. 3.6. Relative contributionof time-varyingmarginal response, 1974-1988.
842
R.J. Caballero d CD
d
A
LO 0
d
o
V
[___
c)
Fig. 3.7. Equipment-mean-difference. The importance of the time-varying elasticity is confirmed by Caballero and Engel (1999), this time using only aggregate data. As before, it is the flexible cyclical elasticity o f the increasing hazard model which allows it to better capture the high skewness and kurtosis imprinted on aggregate data by brisk investment recoveries 46. The solid line in Figure 3.7 plots the difference between the path o f the US manufacturing equipment investment-capital ratio and the predictions o f a linear model (partial adjustment) fed with the shocks estimated for the increasing-hazard model; the dashed line portrays the path o f the aggregate investment-capital ratio around its mean. It is apparent from these figures that the linear model makes its largest errors at times o f large investment changes. 3.4. Equilibrium The literature described in the previous section only considers exogenous aggregate shocks. What the econometric procedures identified as aggregate shocks are in all likelihood a combination o f " d e e p " aggregate shocks and the feedback and constraints brought about by factor markets, goods markets, and intertemporal preferences, among other things. Bottlenecks may certainly limit the extent o f synchronized investment. Equilibrium constraints not only affect the response of aggregate investment to deep aggregate shocks, but also affect the nature o f the stochastic processes faced
46 Note that just allowing for skewness and kurtosis in shocks, although it improves the performance of linear models, is not nearly enough to make the linear model as good as the non-linear one. In Caballero and Engel (1999) we compared the structural model with normal shocks (to the rate of growth of desired capital) with a linear model which flexibly combined normal and log-normal shocks (which allows for skewness and kurtosis). We found that Vuong's test still favored the non-linear model very clearly. Moreover, in Caballero, Engel and Haltiwanger (1995) we found no evidence that would allow us to reject the hypothesis that shocks have a normal distribution.
Ch. 12: Aggregate Investment
843
by firms and the dimension of the state space. It is this last observation which has inhibited progress in constructing general equilibrium versions of these models. In principle, the entire cross sectional distribution is needed to forecast future prices faced by any particular firm, which means that actions today, and therefore equilibrium determination, depend on these complex forecasts, and so on. We are, however, beginning to see progress along this dimension. Much of this has occurred in models with active extensive margins, and will be discussed in the next sections, together with the reasons why the presence o f an extensive margin (entry and/or exit) may facilitate rather than complicate the solution of the model. However, there has also been recent progress along the lines of the intensive margin models discussed up to now. Krieger (1997) embeds the heterogeneous agents irreversible investment model of Bertola and Caballero (1994) into a more or less standard Real Business Cycle model. He deals with the curse of dimensionality by arguing that, except for very high frequency aspects of the data, expectations can be well approximated by keeping track of a finite (and not too large) number of statistics of the Fourier representation of the cross sectional distribution. I suspect that the quality of this approximation is facilitated by the fact that, in Krieger's model, aggregate shocks occur only infrequently. Nonetheless, I view his as an important step forward. At this stage, the primary effect of general equilibrium is not surprising. It brings important sources of aggregate convexity into the problem, smoothing further the response of aggregate investment to aggregate shocks. How important are aggregate sources of convexity? I suspect that, together with time to build considerations, they are among the main sources of convexity in the short run. On one hand, we have already presented substantial evidence on microeconomic lumpiness, which is largely inconsistent with a dominant role for generalized convexity at the microeconomic level. On the other, not only is it well known that estimated partial adjustment coefficients grow with the degree of disaggregation of the data, but we also have direct evidence on the importance of bottlenecks. Goolsbee (1995a) provides interesting evidence on the latter. He exploits the variation across time and assets (capital) in investment tax incentives, as instruments for short-run investment demand. He shows that the price of assets is highly responsive to ITCs: A 10 percent increase in ITCs leads to an average increase in the price of capital goods of about 6 percent. This price effect slowly vanishes over the following three years 47. Equilibrium considerations will play a central role in the sections that follow. In particular, the issue of the elasticity of the supply of capital, generally interpreted, as well as that of other bottlenecks will be revisited often.
47 In further work, Goolsbee (1997) concludes that an important fraction of the increase in short rnn marginal cost is due to an increase in the wages of workers who produce capital goods. In the last part of Section 5 I will discuss the connection between sunk investment and payments to complementary factors. Questioning the robustness of Goolsbee's(1995a) findings, Hassett and Hubbard (1996a), find evidence of a positive effect of tax credits on prices of capital goods before 1975 but not after that.
R.J Caballero
844
4. Entry, exit and scrapping Changes in the aggregate stock of capital are not only due to the expansion of existing establishments and projects, but also result from the entry (creation) decisions of existing and new entrepreneurs, the exit decisions of some incumbents, and the restructuring of possibly outdated forms of production. There is a very extensive and interesting industrial organization literature on these issues which I will not discuss here. Instead, I will focus on issues that directly relate to our current discussion: the impact of sunk costs on aggregate investment and the feedback of equilibrium considerations into individual decisions about lumpy actions. This section contains three main messages: First, by truncating the distribution of perceived future returns, free entry acts as if each competitive investor internalized the negative effect of its entry decision on expected future industry prices. Second, equilibrium scrapping and creation are closely connected: if industry wide creation costs are linear, scrapping will be less responsive to aggregate shocks than if these costs are convex (i.e. if there is an upward sloping short-rtm supply of (newly) installed capital). Among other things, this is important for capital accumulation and the patterns of its mismeasurement. And third, in equilibrium, shocks to the scrapping margin can lead to investment booms, and to double-counting problems in the measurement of capital 48.
4.1. Competitive entry and irreversibility Dixit (1989), Leahy (1993), and Caballero and Pindyck (1996), among others, have provided simple models of competitive equilibrium investment in which the only meaningful investment decision of firms is whether or not to enter into and, in some cases, exit from the industry 49. Below, I sketch a representative model of this type. Investment is sunk upon entry in the sense that selling the firm's capital does not change its productivity. The flow accruing to a firm i at time t is summarized by the product of an idiosyncratic productivity level, Sit > 0 and the industry price, Pt. The idiosyncratic productivity level is such that industry output, Yt, is
Yt =
/o
Sit d i = N~,
(4.1)
where Nt is the measure of firms at time t. Given Art, the industry price is determined from the demand equation:
Pt
= V t Y t -1/~1 =
VtNt 1/~,
(4.2)
48 See Greenspan and Cohen (1996), for a discussion of the importance of considering endogenous scrappage to forecast sales of new motor vehicles in the USA. 49 See Hopenhayn (1992) for an elegant characterization of the steady state properties of a competitive equilibrium model of entry and exit.
Ch. 12: AggregateInvestment
845
where Vt is an aggregate demand shock that follows a geometric Brownian motion with drift/~ > 0 and standard deviation a, and t/ is the elasticity of demand with respect to price 50. Let there be an infinite supply of potential entrants, whose initial productivity upon entry is drama from the distribution of productivities of existing firms. There is an entry cost F and no depreciation or higher productivity alternative use (issues of exit will be discussed in the next subsection). Free entry implies:
F >~Ei { Et [f ~ PsSi,e-r(" Odsl } .
(4.3)
Using Fubini's Theorem (i.e. moving the expectation with respect to the idiosyncratic shocks inside the integral) allows us to remove the idiosyncratic component from Equation (4.3), yielding
F>~Etlft°°P,.er(St)dsJ.
(4.4)
Given Nt, the industry price is exclusively driven by the aggregate demand shock. Thus, absent entry, the right-hand side of Equation (4.4) is an increasing function of Pt, call it j~(P). Entry, however, cannot always be absent, for that would occasionally violate the free entry condition. Indeed, as soon as J~(P) > F, there would be infinite entry which, in turn, would lower the equilibrium price instantly. There is only one price, call it/5o, such that the free entry condition holds with equality. Once this price is reached, enough entry will occur to ensure that the price does not cross this upper bound; but, to be justified, entry must not occur below that bound either. Entry, therefore, changes the stochastic process of the equilibrium price from a Brownian Motion to a regulated Brownian Motion. This change in the price process, however, means that.]~ is no longer the right description of the expression on the right-hand side of Equation (4.4). There is a new function, Ji(P), which is still monotonic in the price, but which satisfies Ji(P) < J~(P) for all P because of the role of entry in preventing the realization of high prices. This, in turn, implies a new reservation/entry price P1 > P0, which leads to a new function )~(P), such that j~ > y~ > Ji, which leads to a new regulation point in between the previous ones, and so on until convergence to some equilibrium, ~(p),p)51. Thus, through competitive equilibrium, we have arrived at a solution like that of the irreversible investment problem at the individual level, but now for the industry as a whole. Periods of inaction are followed by regulated investment (through entry) during favorable times. The constructive argument used to illustrate the solution isolates
50 Adding an aggregate productivity shock is straightforward. The Brownian Motion assumption is not needed, but it simplifiesthe calculations. 51 Needless to say, this iterative procedure is not needed to obtain the solution of this problem.
846
R.J Caballero
the feedback of equilibrium on individual decisions. Potential entrants (investors) know that if market conditions worsen they will have to absorb losses (this is where irreversibility kicks in), while if market conditions improve, entry will occur, limiting the potential gains (since the price will never be higher than/5). As a result, they delay entry because the expected value of future market prices is necessarily lower than the current/entry price. There is a methodological angle in this literature. Entry (and exit) is a very powerful mechanism. With the "appropriate" assumptions about potential entrants, entry often simplifies the computation of equilibrium in models with heterogeneity and sunk costs. Essentially, the methodological "trick" is that the degree of complexity of the computational problem in cases where both extensive and intensive margins are present is often largely determined by the nature of the distribution of potential entrants, which can be made much simpler than the endogenous evolution of the cross sectional distributions discussed in the previous section. Of course, in reality there is substantial inbreeding, so the distribution of potential entrants is in all likelihood related to that of incumbents. Nonetheless, the current set of models are convenient machines that allow us to cut the chain of endogeneity before it gets too forbidding, but after the first stage, where there are no endogenous interactions. This methodological advantage has allowed researchers to explore some of the equilibrium issues left open in Section 3. Caballero and Hammour (1994) have explored in more detail the consequences of different assumptions on the supply of capital for the pattern of aggregate investment (job creation) and scrapping (job destruction). The latter is a very important, and often disregarded, aspect of the timing of capital accumulation. I will return to the scrapping issue in the next sections, but for now I just want to interpret it as an incumbent's decision (as opposed to a potential entrants' decision). The issue at hand is how does the entry pattern affect the response of incumbents to aggregate shocks. A scrapping margin can easily be added to the entry model discussed above by, for example, allowing Si to take negative values (e.g. due to the increase in the price of an intermediate input). Imagine, however, that the drift in the aggregate shock (and/or the failure rate of incumbents) is strong enough so there is continuous entry. Since the supply of capital faced by the industry is fully elastic (the entry cost is constant), continuous entry implies that the industry price is constant and equal to/5 (corrected for the exit possibility). That is, aggregate shocks are accommodated by the flow of investment by new entrants; fully insulating insiders from aggregate shocks. Insiders go about their scrapping decisions only considering their idiosyncratic shocks; adding a standard intensive margin does not change the basic insight [see Campbell and Fisher (1996)]. Caballero and Hammour (1994) refer to this result as perfect insulation. From a technical point of view, the simplicity of the computation of equilibrium in the perfect insulation case carries through to situations where the cost of investment fluctuates exogenously, although in that case perfect insulation breaks down. If the industry faces an upward sloping supply of capital, a sensible assumption at least in the
Ch. 12: Aggregateinvestment
847
short run (remember Goolsbee's evidence), we return to a scenario in which the "curse of dimensionality" appears. Caballero and Hammour (1994, 1996a) have dealt with this case in scenarios where aggregate shocks follow deterministic cycles 52. Besides the specific issues addressed in those papers, the main implication for the purpose of this survey is that investment by potential entrants becomes less responsive to aggregate shocks, which also means a break down of perfect insulation and therefore a more volatile response of the scrapping and intensive margins. Krieger (1997) also discusses equilibrium interactions between creation and destruction margins, although he obtains positive rather than negative comovement between investment and scrapping. In his model, a permanent technology shock leads to a short term increase in interest rates which squeezes low productivity units relative to high productivity ones. The ensuing increase in scrapping frees resources for new higherproductivity investment. Similarly, Campbell (1997) studies the equilibrium response of entry and exit to technology shocks embodied in new production units. He argues that the increase in exit generated by positive technological shocks is an important source of resources for the creation of new production sites. 4.2. Technological heterogeneity and scrapping Scrapping is an important aspect of the process of capital accumulation. Understanding it is essential for constructing informative measures of the quantity and quality of capital at each point in time. Nonetheless, the scrapping margin is seldom emphasized, I suspect, mostly because of the difficulties associated with obtaining reliable data53. As a result, many time series comparisons of capital accumulation and productivity growth (especially across countries) are polluted by inadequate accounting of scrapping. Effective capital depreciation must surely be higher in countries tmdergoing rapid modernization processes. Partly to address these issues, vintage capital and putty-clay models have regained popularity lately. Benhabib and Rustichini (1993), for example, describe the investment cycles that follow scrapping cycles in a vintage capital model. While Atkeson and Kehoe (1997) argue that putty-clay models outperform standard putty-putty models with adjustment costs in describing the cross sectional response of investment and output to energy shocks. Gilchrist and Williams (1996), on the other hand, embody the putty-clay model in an otherwise standard RBC model and document a substantial gain over the standard RBC model in accounting for the forecastable comovements of economic aggregates. And Cooley et al. (1997) describe the medium/low frequency
52 In work in progress [Caballero and Hammour (1997b)], we have obtained an approximate solution for the stochastic case, in a context where the sources of convexity are malfimctioninglabor and credit markets. 53 See Greenspan and Cohen (1996) for sources of scrapping data for US motor vehicles.
848
R.J Caballero
aspects of a multisectoral vintage capital economy, and show how tax policy can have significant effects on the age distribution of the capital stock 54. The technological embodiment aspect of these models captures well the creativedestruction component of capital accumulation and technological progress 55. Salter's (1960) careful documentation of the technological status of narrowly defined US and UK industries is very revealing with respect to the simultaneous use of different techniques of production and the negative correlation between productivity ranking and the technological age of the plant 56. For example, his table 5 shows the evolution of methods in use in the US blast furnace industry from 1911 to 1926. At the beginning of the sample, the "best practice" plants produced 0.32 gross tons of pigiron per man-hour, while the industry average was 0.14. By the end of the sample, best practice plants productivity was 0.57 while the industry average was 0.30. While at the beginning of the sample about half of the plants used hand-charged methods of production, only six percent did at the end of the sample. As mentioned above, obsolescence and scrapping are not only driven by slowly moving technological trends, but also by sudden changes in the economic environment. Goolsbee (1995b) documents the large impact ofoil shocks on the scrapping of old and fuel-inefficient planes. For example, he estimates that the probability of retirement of a Boeing 707 (relatively inefficient in terms of fuel) more than doubled after the second oil shock. This increase was more pronounced among older planes. Once more, the endogenous nature of the scrapping dimension must be an important omitted factor in our accounting of capital accumulation and microeconomie as well as macroeconomic performance. The sunk nature of technological embodiment is a source of lumpy and discontinuous actions at the microeconomic level. The (S, s) apparatus, with its implications for aggregates, is well suited for studying many aspects of vintage and putty-clay models. In particular, episodes of large investment which leave their technological fingerprints, and remain in the economy, reverberating over time.
5. Inefficient investment
Fixed costs, irreversibilities and their implied pattern of action/inaction, have microeconomic and aggregate implications beyond the mostly technological (and neoclassical) ones emphasized above. Indeed, they seed the ground for powerful inefficiencies. This section describes new research on the consequences o f two of
54 Jovanovic(1997) studies the equilibrium interactionof the cross sectionalheterogeneityimplied by vintage capital and putty-claymodels with heterogeneityin labor skills. 55 Besides obsolescence and scrapping, these models are also useful for studying the issues of "mothballing" and capital utilization. 56 This correlation is less clear in modern data; perhaps because retooling occurs within given structures.
Ch. 12: AggregateInvestment
849
the most important sources of inefficiency in aggregate investment: informational and contractual problems. 5.1. Informational problems
Information seldom arrives uniformly and comprehensively to every potential investor. Each investor probably holds part of a truth which would be more easily seen if all investors could (or would) pool their information. Actions by others are a partial substitute for information pooling, for they reveal, perhaps noisily, the information of those that have taken actions. If, however, investment is irreversible, it may pay to wait for others to act and reveal their information before investing. Moreover, if lumpiness leads to periods of no or little action, information may remain trapped for extended periods of time, and when agents finally act, an avalanche may occur because accumulated private information is suddenly aggregated. These issues form the crux of a very interesting new literature, summarized in Gale (1995) under the heading of "social learning." There are two themes emerging from this literature which are of particular importance for this survey. The first is the existence of episodes of gradualism, during which industry investment can occur at an excessively slow pace, or even collapse altogether. The second is an exacerbation of the aggregate nonlinearities implied by the presence of fixed costs; aggregation of information coincides with the synchronization of actions, further synchronizing actions. Caplin and Leahy (1993, 1994) cleanly isolate the issues I have chosen to stress here. Caplin and Leahy (1993) describe a model very similar to the free entry model reviewed in Section 4.1, except that their model has neither aggregate nor idiosyncratic shocks. Instead there is a flow marginal cost of producing which is only known to industry insiders. Insiders have the option to produce one unit of output or none and they will produce if price is above marginal cost. This generates an information externality. If all incumbents are producing, potential investors know that marginal cost is below the current equilibrium price; if not, the industry's marginal cost is revealed to be equal to the current price. Whenever a new establishment is created, equilibrium price either declines or stays constant, improving the precision of potential investors' assessment of the industry's marginal cost. In a second best solution, investment occurs very quickly up to a point at which, even if marginal cost has not yet been reached, no further investment takes place because it is very unlikely that the present value of future social surpluses is enough to cover the investment costs. The industry equilibrium outcome has the same critical point at which investment stops, but unlike the second best outcome, it yields a much slower pace of industry investment. A potential entrant must weigh the value of coming early into the industry (expected profits are higher than they will be later), not only against the cost of capital (as in the second best solution) but also against the probability o f learning in the next second from the investment decisions of others that it was not worth entering
850
R.J. Caballero
the industry. Caplin and Leahy show that the price process x(t) obeys the following differential equation:
where F is the fixed entry cost paid by the firm and r is the real interest rate. This equation has a natural interpretation which captures the idea that competitive firms are indifferent between entry today and entry tomorrow. The left-hand side represents the loss in current revenue incurred by a firm which delays entry for a brief instant beyond t s7. The right-hand side captures the expected gain from this delay. The term rF reflects the gain due to the postponement of the entry cost, while the last term represents the saving due to the possibility that delay will reveal the true industry's marginal cost, aborting a wasteful investment sS. In equilibrium, entry is delayed and price declines slowly; "gradualism" maintains prices high enough for sufficiently long so as to offset (in expectation) the risk incurred by investors who act early rather than wait and free-ride off of others' actions s9. Caplin and Leahy (1994) characterize the opposite extreme, one of delayed exit. The key connection with the previous sections is that the problem of information revelation arises from the fact that, as we have seen, fixed costs of actions make it optimal not to act most of the time. Thus, information that could be revealed by actions remains trapped. Their model is one of time-to-build. Many identical firms simultaneously start projects which have an uncertain common return several periods later (e.g. a real estate boom). Along the investment path, firms must continue their investment and receive private signals on the expected return. The nature of technology is such that required investment is always the same if the firm chooses to continue in the project. The firm has the option to continue investing ("business as usual"), to terminate the project, or to suspend momentarily, but the cost of restarting the project after a suspension is very large. Project suspension reveals (to others) negative idiosyncratic information; if nobody suspends, it is good news. However, the costly nature of suspension delays it, and therefore information revelation is also delayed. Bad news may be accumulating but nobody suspends, because everybody is waiting for a confirmation of their bad signals by the suspension of other people. Eventually, some firms will receive enough bad signals to suspend in spite of the potential cost of doing so (i.e., if they are wrong
57 At the time when the industry starts, potential investors' priors are that the price is distributed uniformly on [0, I]. As entry occurs and the price declines, the priors are updated. If convergence has not happened at time t, marginal cost is assumed uniformly distributed on [0,x(t)]. The expected cost of waiting is, therefore, equal to the price minus the expected marginal cost, ½x(t). 58 Here ~ d t is the probabilitythat price hits marginal cost during the next dt units of time. 59 Even though entrants make zero profits in expectation, ex-post, early entrants earn positive profits, while late entrants lose money.
Ch. 12: Aggregate Investment
851
in their negative assessment o f market conditions). Since the number of firms in their model is large, the number of firms that suspend for the first time fully reveals future demand: if demand is low, everybody exits; if it is high, all those that suspended restart. If it were not for the interplay between inaction (investment as usual) and private information, the fate of the market would be decided correctly after the first round of signals. Information aggregation does not take place until much later, however. Thus, substantial investment may turn out to be wasted because the discrete nature of actions inhibits information transmission. The title of their paper beautifully captures the expost feeling: Wisdom after the fact. The "classic" paper from the literature on information and investment is due to Chamley and Gale (1994). In their model all (private) information arrives at time zero; the multiple agent game that ensues may yield many different aggregate investment paths, including suboptimal investment collapses. In reviewing the literature, Gale (1995) illustrates the robustness of the possibility of an inefficient investment collapse (or substantial slowdown and delay). He notices that in order for there to be any value to waiting to see what others do before taking an action (investing for example) it must be the case that the actions of others are meaningful. That is, the action taken in the second period by somebody who chose to wait in the first period must depend in a non trivial way on the actions of others at the first date. If a firm chooses to wait this period, possibly despite having a positive signal, it will only invest next period if enough other firms invest this period. It must therefore be possible for every firm to decide not to invest next period because no one has invested this period, even though each firm may have received a positive signal this period, in which case, investment collapses. This is a very interesting area of research for those concerned with investment issues and is wanting for empirical developments. 5.2. Specificity and opportunism
The quintessential problem of investment is that it is almost always sunk, possibly along many dimensions. That is, the number of possible uses of resources is reduced dramatically once they have been committed or tailored to a specific project or use. Every model I discussed in the previous sections, at some stage hinges in a fundamental way on this feature of investment. To invest, often means opening a vulnerable flank. Funds which were ex-ante protected against certain realizations of firm or industry specific shocks, for example, are no longer so. In equilibrium, investment must also allow the investor to exploit opportunities which would not be available without the investment. If the project is well conceived, the weight of good and bad scenarios is such that the expected return is reasonable. Indeed, this is precisely the way I characterized the standard irreversible investment problem early on. The problem is far more serious, and more harmful for investment, when the probability of occurrence of the bad events along the exposed flanks are largely
852
R.J Caballero
controlled by economic agents with the will and freedom to behave opportunistically. In a sense, this is a property rights problem, and as such it must have a first-order effect in explaining the amount and type o f capital accumulation and, especially, differences in these variables across countries. Thus, the window for opportunism arises when part o f the investment is specific to an economic relationship, in the sense that if the relationship breaks up, the potential rewards to that investment are irreversibly lost. Further, such opportunism is almost unavoidable when this "fundamental transformation" from uncommitted to specialized capital is not fully protected by contract [Williamson (1979, 1985)] 60 Specificity, that is, the fact that factors o f production and assets may be worth more inside a specific relationship than outside o f it, may have a technological or an institutional origin. Transactions in labor, capital and goods markets are frequently characterized by some degree o f specificity. The creation of a job often involves specific investment by the firm and the worker. Institutional factors, such as labor regulations or unionization also build specificities. There is a very extensive and interesting microeconomic literature on the impact of unprotected specificity on the design o f institutions, organizations and control rights. Hart (1995) reviews many o f the arguments and insights. For the purpose o f this survey, however, the fundamental insight is in Simons (1944), who clearly understood that hold-up problems lead to underinvestment: ... the bias against new investment inherent in labor organizations is important .... Investors now face ... the prospect that labor organizations will appropriate most or all of the earnings .... Indeed, every new, long-term commitment of capital is now a matter of giving hostages to organized sellers of complementary services. More recently, Grout (1984) formalized and generalized Simons' insight, and Caballero and Hammour (1998a) studied, at a general level, the aggregate consequences o f opportunism 61. Here, I borrow the basic model and arguments from that paper to discuss those aspects o f the problem which are most relevant for aggregate investment. Everything happens in a single period 62. There is one consumption good, used as a numeraire, and two active factors o f production, 1 and 2 63. Ownership o f factors 1 and 2 is specialized in the sense that nobody owns more than one type of factor.
60 This is known as the hold-up problem. 61 For specific applications which relate to investment see Kiyotaki and Moore (1997) [credit constraints]; Caballero and Hammour (1996a, 1998b) and Ramey and Watson (1996) [turnover and unemployment]; Caballero and Hammour (1996b), Blanchard and Kremer (1996) [transition economies and structural adjustments]; Caballero and Hammour (1997b) [interactions between labor market and credit market oppor~nism]; Acemoglu (1996) [human capital investment]. 62 Many of the insights discussed here can and have been made in dynamic, but more specialized contexts. I am confident, therefore, that this section's discussion is fairly robust to generalizations along this dimension. 63 Also, there is a passive third factor which earns the rents of decreasing returns sectors.
Ch. 12: Aggregate Investment
8 5 3
There are two modes o f production. The first is joint production, which requires, in fixed proportions, xl and x2 units of factors 1 and 2, respectively, to produce y units o f output. Let E denote the number of joint production units, so Ei = x i E represents employment o f factor i in joint production. The other form o f production is autarky where each factor produces separately, with decreasing returns technologies Fi(Ui), and where Ui denotes the employment of factor i in autarky, such that Ei + Ui = 1. The autarky sectors are competitive, with factor payments, pi: Pi = F;(Ui).
(5.2)
For now, there are no existing units. At the beginning of the period there is mass one o f each factor o f production. There are no matching frictions so that, in the efficient/complete contracts economy, units move into joint production (assuming corners away) until y-p~xl
+p2x2,
(5.3)
where asterisks are used to denote efficient quantities and prices. Specificity is captured by assuming that a fraction q~i of each factor of production cannot be retrieved from a relationship once they have agreed to work together. I f the relationship breaks up, (1 Oi)xi units of factor i can return to autarky, where it produces for the period, while ¢)ixi is irreversibly wasted. In the simple deterministicsingle-period model discussed here, specificity plays no role in the efficient economy, where there are no separations. Contracts are needed because investment occurs before actual production and factor participation. There are myriad reasons why contracts are seldom complete. An extreme assumption which takes us to the main issues most directly, is the assumption that there are no enforceable contracts. It turns out that, in equilibrium, the incomplete contracts economy has no separations either; but unlike the efficient economy, the mere possibility o f separations alters equilibrium in many ways. Generically, equilibrium rewards in joint production will have ex-post opportunity cost and rent-sharing components. For simplicity, let us assume that factors split their joint surplus 50/50. Thus, the total payment to the xi units of factor i in a unit of joint production is 64 -
wixi = (1
1
-
~)i) xiPi -1- ~S,
(5.4)
where s denotes the (ex-post) quasi-rents of a production unit: s ~- y - (1
- q}l)plXl
- (1 - q}2)p2x2.
64 Factors bargain as coalitions within the production unit.
(5.5)
854
R.J. Caballero
For a factor of production to willingly participate in joint production it must hold that WiXi ~ pixi.
(5.6)
Substituting Equations (5.4) and (5.5) into Equation (5.6), transforms factor i's participation condition into y ~ p l x t +p2x2 + Ai,
(5.7)
Z~i ~ ~)iPiXi -- ~ j p j x j ,
(5.8)
with
which measures the net sunk component of the relationship for factor i. In other words, it is a measure of the "exposure" of factor i to factor j. When Ai is positive, part of factor i's contribution to production is being appropriated by factor j 65. 5.2.1. Generic implications
Figure 5.1 characterizes equilibrium in both efficient and incomplete contract economies. The two dashed curves represent the right-hand side of condition (5.7) for factors 1 and 2. They are increasing in the number of production units because the opportunity cost of factors of production (the pis) rise as resources are attracted away from autarky. The thick dashed curve corresponds to that factor of production (here factor 1) whose return in autarky is tess responsive to quantity changes 66. If one thinks of capital and labor, arguably capital is this factor; which is a maintained assumption through most of this section. The horizontal solid line is a constant equal to y, which corresponds to the left-hand side of condition (5.7). Equilibrium in the incomplete contracts economy corresponds to the intersection of this line with the highest (at the point of intersection) of the two dashed lines. In the figure, the binding constraint is that of capital. An efficient equilibrium, on the other hand, corresponds to the intersection of the horizontal solid line with the solid line labeled Eft. The latter is just the sum of the exante opportunity costs of factors of production [the right-hand side of Equation (5.3)]. This equilibrium coincides with that of the incomplete contracts economy only when both dashed lines intersect; that is, when net appropriation is z e r o (A i = - A j = 0). There are several features of equilibrium which are important for investment (or capital accumulation). First, there is underinvestment; equilibrium point A is to the left of the efficient point A*. Because it is being appropriated, capital withdraws into autarky (e.g. consumption, investment abroad, or investment in less socially-valuable
65 It should be apparent that A i = -Aj. 66 That is, autarky exhibitsrelativelyless decreasingreturns for this factor.
855
Ch. 12: Aggregate Investment
(2) Eft. B ~ y , ~ (1) ~ l /
.'i//
//
///
U. / / /
~.
E
Fig. 5.1. Opportunism in general equilib-
rium.
activities) 67. Second, the withdrawal of capital constrains the availability of jobs and segments the labor market 68. In equilibrium, not only are there fewer joint production units, but also the right-hand side of condition (5.7) for labor is less than y, reflecting the net appropriation of capital; outside labor cannot arbitrage away this gap because its promises are not enforceable. Third, investment is more volatile than it would be in the efficient economy 69. Changes in y translate into changes in the number of joint production units through capital's entry condition (thick dashes), which is clearly more elastic (at their respective equilibria) than the efficient entry condition ("Eft" line). If profitability in joint production is high enough, equilibrium is to the right of the balanced specificity point, B. In that region, it is the labor entry condition which binds. In principle, problems are more easily solved in this region through contracts and bonding. I f not solved completely, however, there are a few additional conclusions o f interest for an investment survey. First, there is underinvestment since the complementary factor, labor, withdraws (relative to the first best outcome) from joint production. Second, capital is now rationed, so privately profitable investment projects do not materialize. Third, investment is now less volatile than in the efficient economy. Changes in y translate into changes in the number of joint production units through labor's entry condition (thin dashes), which is clearly less elastic than the efficient entry condition ("Eft" line).
67 See Fallick and Hassett (1996) for evidence on the negative effect of union certification on firm level investment. 68 This holds even in the extreme case where capital and labor are perfect substitutes in production. See Caballero and Hammour (1998a). 69 In a dynamic model, this translates into a statement about net capital accumulation rather than, necessarily, investment. The reason for the distinction is that the excessive response of the scrapping margins and intertemporal substitution effects on the creation side may end up dampening actual investment. See Caballero and Hammour (1996a).
856
R.J Caballero
The equilibrium implications of incomplete contracts also affect the scrapping decisions of firms. The easiest way to see this is to examine an existing production unit and ask how low its profitability would have to be for it to scrap itself and seek other opportunities. Moreover, assume that neither factor suffers from specificity in this production unit, so that the efficient rule is scrap whenever profitability is less than y. Two, apparently contradictory, features characterize the incomplete contracts economy. First, because the opportunity cost of factors of production is depressed by the excessive allocation to autarky, there is sclerosis; that is, there are units with profitability below y which are not scrapped because the opportunities in autarky are depressed. Second, given the depressed level of investment, there is excessive destruction. Since the appropriating factor earns rents in joint production, some of them leave socially valuable production units in order to improve their chances of earning these excess returns. Caballero and Hammour (1998a,b) argue that, over the long run, capital/labor substitution takes place. If capital is being appropriated, it will seek to exclude labor from joint production by choosing a capital intensive technology. This effect goes beyond purely neoclassical substitution, as it also seeks to reduce the appropriability problem 70. At a general level, of course, unenforceability of contracts results from the absence of well defined property rights. There is plenty of evidence on the deleterious consequences of such problems for investment. Two recent examples in the literature are Besley (1995) and Hall and Jones (1996). The former provides a careful description of land rights in different regions of Ghana. He documents that an "extra right" over a piece of land increases investment in that land by up to 9 percent in Anloga and up to 28 percent in Wassa 71. Hall and Jones (1996) use a large cross section of countries to show, among other things, that capital/labor ratios are strongly negatively related to "divertment activities." 5.2.2. Credit constraints
There is by now a large body of evidence supporting the view that credit constraints have substantial effects on firm level investment. Although there are a number of qualifications to specific papers in the literature, the cumulative evidence seems overwhelmingly in favor of the claim that investment is more easily financed with internal than external funds 72. I will not review this important literature here because there are already several good surveys 73.
70 We argue that this is a plausible factor behind the large increase in capital/labor ratios in Europe relative to the USA. 71 Rights to sell, to rent, to bequeath, to pledge, to mortgage, etc. 72 For a dissenting view, see e.g. Kaplan and Zingales (1997) and Cummins, Hassett and Oliner (1996b). 73 See e.g. Bernanke et al. (1996, 1999) and Hubbard (1995) for recent ones.
Ch. 12: Aggregate Investment
857
While there are extensive empirical and theoretical microeconomic literatures, the macroeconomics literature on credit constraints is less developed. Notable exceptions are: Bernanke and Gertler (1989, 1990), Kiyotaki and Moore (1997) and Greenwald and Stiglitz (1993)74. Although the exact mechanisms are not always the same, many of the aggregate insights of this literature can be described in terms of the results in the preceding subsections. Changing slightly the interpretation of factor 2, from labor to entrepreneurs, allows us to use Figure 5.1 to characterize credit constraints. Rationing in the labor market becomes rationing of credit available to projects. To the left of point B, which is the region analyzed in the literature, net investment is too responsive to shocks; there is more credit rationing as the state of the economy declines; and there is underinvestment in general. Internal funds and collateralizable assets reduce the extent of the appropriability problem by playing the role of a bond, and introduce heterogeneity and therefore ranking of entrepreneurs. Since the value of collateral is likely to decline during a recession, there is an additional amplification effect due to the decline in the feasibility of remedial "bonding" 75.
6. Conclusion and outlook
This survey started by arguing that the long run relationship between aggregate capital, output and the cost of capital is not very far from what is implied by the basic neoclassical model: in the US, the elasticity of the capital-output ratio with respect to permanent changes in the cost of capital is close to minus one. In the short run things are more complex. Natural-experiments have shown that, in the cross section, the elasticity of investment with respect to changes in investment tax credits is much larger than we once suspected. How to go from these microeconomic estimates to aggregates, and to the response of investment to other types of shocks is not fully resolved. We do know, however, that these estimates represent expected values of what seems to be a very skewed distribution of adjustments. A substantial fraction of a firm's investment is bunched into infrequent and lumpy episodes. Aggregate investment is heavily influenced by the degree of synchronization of microeconomic investment spikes. For US manufacturing, the short run (annual) elasticity of investment with respect to changes in the cost of capital is less than one tenth the long run response when the economy has had a depressed immediate history, while this elasticity can rise by over 50 percent when the economy is undergoing a sustained expansion.
74 Also see Gross (1994) for empirical evidence and a model integrating financial constraints and irreversibility. 75 See e.g. Kiyotaki and Moore (1997).
858
R.J Caballero
Still, the mapping from microeconomics to aggregate investment dynamics especially equilibrium aggregate investment dynamics - is probably more complex than just the direct aggregation o f very non-linear investment patterns. Informational problems lead to a series o f strategic delays which feed into and feed off o f the natural inaction o f lumpy adjustment models. This process has the potential to exacerbate significantly the time varying n a c r e o f the elasticity o f aggregate investment with respect to aggregate shocks. Moreover, sunk costs provide fertile ground for opportunistic behavior. In the absence o f complete contracts, aggregate net investment is likely to become excessively volatile. The lack o f response o f equilibrium payments to complementary - and otherwise inelastic - factors (e.g. workers), exacerbates the effects o f shocks experienced b y firms. Also, the withdrawal o f financiers' support during recessions further reduces investment. Thus, capital investment seems to be hurt at both ends: workers that do not share fairly during downturns, and financiers that want to limit their exposure to potential appropriations from entrepreneurs which cannot credibly commit not to do so during the recovery. The last two themes, equilibrium outcomes with informational problems and opportunism, are wanting for empirical work. I therefore suspect that we will see plenty o f research filling this void in the near future.
References Abel, A.B. (1979), Investment and the Value of Capital (Garland, New York). Abel, A.B., and J.C. Eberly (1994), "A unified model of investment under uncertainty", American Economic Review 84(December):1369-1384. Abel, A.B., and J.C. Eberly (1996a), "Investment and q with fixed costs: an empirical analysis", mimeograph (Wharton School, University of Pennsylvania, January). Abel, A.B., and J.C. Eberly (1996b), "The effects of irreversibility and uncertainty on capital accumulation", mimeograph (Wharton School, University of Pennsylvania, May). Abel, A.B., A.K. Dixit, J.C. Eberly and R.S. Pindyck (1996), "Options, the value of capital, and investment", Quarterly Journal of Economics 111(3, August):753-777. Acemoglu, D. (1996), "A microfoundation for social increasing returns in human capital accumulation", Quarterly Journal of Economics 111(3, August):779-804. Atkeson, A., and EJ. Kehoe (1997), "Models of energy use: putty-putty vs. Putty-clay", Federal Reserve Bank of Minneapolis, Research Department, Staff Report 230 (March). Auerbach, A.J., and K.A. Hassett (1992), "Tax policy and business fixed investment in the United States", Journal of Public Economics 47(2):141-170. Barnett, S., and E Sakellaris (1995), "Non-linear response of firm investment to Q: testing a model of convex and non-convex adjustment costs", mimeograph (University of Maryland, August). Benhabib, J., and A. Rustichini (1993), "A vintage model of investment and growth: theory and evidence", in: R. Becker, ed., General Equilibrium, Growth and Trade, vol. II (Academic Press, New York). Bernanke, B.S., and M. Gertler (1989), "Agency costs, net worth, and business fluctuations", American Economic Review 95:14-31. Bernanke, B.S., and M. Gertler (1990), "Financial fragility and economic performance", Quarterly Journal of Economics 105:87-114.
Ch. 12: Aggregate Investment
859
Bernanke, B.S., M. Gertler and S. Gilchrist (1996), "The financial accelerator and the flight to quality", Review of Economics and Statistics 78:1-15. Bernanke, B.S., M. Gertler and S. Gilchrist (1999), "The financial accelerator in a quantitative business cycle framework", ch. 21, this Handbook. Bertola, G. (1988), "Adjustment costs and dynamic factor demands: investment and employment under uncertainty", Ph.D. Dissertation (MIT, Cambridge, MA). Bertola, G. (1992), "Labor turnover costs and average labor demand", Journal of Labor Economics 10(4):389-411. Bertola, G., and R.J. Caballero (1990), "Kinked adjustment costs and aggregate dynamics", in: O.J. Blanchard and S. Fischer, eds., NBER Macroeconomics Annual (MIT Press, Cambridge, MA) 237-288. Bertola, G., and R.J. Caballero (1994), "Irreversibility and aggregate investment", Review of Economic Studies 61(2, April):223-246. Besley, T. (1995), "Property rights and investment incentives: theory and evidence from Ghana", Journal of Political Economy 103(5, October):903-937. Blanchard, O.J. (1986), "Investment, output, and the cost of capital: a comment", Brookings Papers on Economic Activity 1986(1):153-158. Blanchard, O.J., and M. Kremer (1996), "Disorganization", mimeograph (MIT, October). Brainard, W.C., and J. Tobin (1968), "Pitfalls in financial model building", American Economic Review 58(May):99-122. Caballero, R.J. (1993a), "On the dynamics of aggregate investment", in: L. Serven and A. Solimano, eds., Striving for Growth After Adjustment, The Role of Capital Formation (The World Bank, Washington, DC) 81-106. Caballero, R.J. (1993b), "Durable goods: an explanation for their slow adjustment", Journal of Political Economy 101(2, April):351-384. Caballero, R.J. (1994a), "Small sample bias and adjustment costs", Review of Economics and Statistics 76(I, February):52-58. Caballero, R.J. (1994b), "A reconsideration of investment behavior using tax reforms as natural experiments: a comment", Brookings Papers on Economic Activity 1994(2):62 68. Caballero, R.J., and E. Engel (1999), "Explaining investment dynamics in U.S. manufacturing: a generalized (S, s) approach", Econometrica 67(4, July). Caballero, R.J., and M.L. Hammour (1994), "The cleansing effect of recessions", American Economic Review 84(5, December):1350-1368. Caballero, R.J., and M.L. Hammour (1996a), "On the timing and efficiency of creative destruction", Quarterly Journal of Economics 111(3, August):805-852. Caballero, R.J., and M.L. Hammour (1996b), "On the ills of adjustment", Journal of Development Economics 51(1, October):161-192. Caballero, R.J., and M.L. Hammour (1997b), "Improper churn: financial constraints and factor markets", mimeograph (MIT, May). Caballero, R.J., and M.L. Hammour (1998a), "The macroeconomics of specificity", Journal of Political Economy 106(4, August):724-767. Caballero, R.J., and M.L. Hammour (1998b), "Jobless growth: appropriability, factor substitution, and unemployment", Carnegie-Rochester Conference Series on Public Policy 48(June):51-94. Caballero, R.J., and J. Leahy (1996), "Fixed costs: the demise of marginal q", Working paper No. 5508 (NBER, March). Caballero, R.J., and R.S. Pindyck (1996), "Uncertainty, investment, and industry evolution", International Economic Review 37(3, August):641-662. Caballero, R.J., E. Engel and J. Haltiwanger (1995), "Plant-level adjustment and aggregate investment dynamics", Brookings Papers on Economic Activity 1995(2):1-54. Campbell, J.R. (1997), "Entry, exit, embodied technology, and business cycles", Working Paper No. 5955 (NBER, March).
860
R.J Caballero
Campbell, J.R., and J.D.M. Fisher (1996), "Aggregate employment fluctuations with microeconomic asymmetries", mimeograph (University of Rochester, August). Caplin, A., and J. Leahy (1993), "Sectoral shocks, learning, and aggregate fluctuations", Review of Economic Studies 60(4, October):777-794. Caplin, A., and J. Leahy (1994), "Business as usual, market crashes and wisdom after the fact", American Economic Review 84(3, June):54%565. Chamley, C., and D. Gale (1994), "Information revelation and strategic delay", Econometrica 62: 1065-1085. Chirinko, R.S. (1993), "Business fixed investment spending: a critical survey of modelling strategies, empirical results, and policy implications", Journal of Economic Literature 31 (December): 1875-1911. Clark, J.M. (1917), "Business acceleration and the law of demand: a technical factor in economic cycles", Journal of Political Economy 25(March):217-235. Clark, J.M. (1944), "Additional note on business acceleration and the law of demand", in: American Economic Association, Readings in Business Cycle Theory (Blackiston Company, Philadelphia, PA). Cooley, T.E, J. Greenwood and M. Yornkoglu (1997), "The replacement problem", Working paper No. 444 (Rochester Center for Economic Research, August). Cooper, R., J. Haltiwanger and L. Power (1994), "Machine replacement and the business cycle: lumps and bumps", mimeograph (Boston University). Cummins, J.G., K.A. Hassett and R.G. Hubbard (1994), "A reconsideration of investment behavior using tax reforms as natural experiments", Brookings Papers on Economic Activity 1994(2):1-59. Cummins, J.G., K.A. Hassett and R.G. Hubbard (1996a), "Tax reforms and investment: a cross country comparison", Journal of Public Economics 62(1/2, October):237-273. Cummins, J.G., K.A. Hassett and S.D. Oliner (1996b), "Investment behavior, internal funds, and observable expectations", mimeograph (New York University, October). Dixit, A. (1989), "Entry and exit decisions under uncertainty", Journal of Political Economy 97:620-638. Dixit, A. (1993), The Art of Smooth Pasting (Harwood Academic Publishers, Langhorns, PA). Doms, M., and T. Dunne (1993), "An investigation into capital and labor adjustment at the plant level", mimeograph (Center for Economic Studies, Census Bureau). Eisner, R. (1969), "Tax policy and investment behavior: a comment", American Economic Review 59(June):379-388. E1 Karoui, N., and I. Karatzas (1991), "A new approach to the Skorohod problem, and its applications", Stochastics 34:57-82. Fallick, B.C., and K.A. Hassert (1996), "Investment and union certification", Discussion paper No. 1996-43 (FED, November). Fazzari, S.M., R.G. Hubbard and B.C. Petersen (1988), "Financing constraints and corporate investment", Brookings Papers on Economic Activity 1988(1):141-195. Gale, D. (1995), "What have we learned from social learning?", mimeograph (Boston University, August). Gilchrist, S., and J.C. Williams (1996), "Putty-clay and investment: a business cycle analysis", mimeograph (Boston University, May). Goolsbee, A. (1995a), "Investment tax incentives and the price of capital goods", mimeograph (Chicago GSB). Goolsbee, A. (1995b), "Factor prices and the retirement of capital goods", mimeograph (Chicago GSB,
July). Goolsbee, A. (1997), "The incidence of investment tax subsidies: to the workers go the spoils?", mimeograph (Chicago GSB, February). Goolsbee, A., and D.B. Gross (1997), "Estimating adjustment costs with data on heterogeneous capital goods", mimeograph (Chicago GSB, September). Greenspan, A., and D. Cohen (1996), "Motor vehicles stocks, scrappage, and sales", Working paper No. 1996-40 (FED, October).
Ch. 12:
Aggregate Investment
861
Greenwald, B., and J. Stiglitz (1993), "Financial market imperfections and business cycles", Quarterly Journal of Economics 108(1, Febrnary):77-114. Gross, D. (1994), "The investment and financing decisions of liquidity constrained firms", mimeograph (Chicago GSB). Grout, RA. (1984), "Investment and wages in the absence of binding contracts: a Nash bargaining approach", Econometrica 52(2, March):449-460. Hall, R.E., and C.I. Jones (1996), "The productivity of nations", mimeograph (Stanford University, August). Hall, R.E., and D.W Jorgenson (1967), "Tax policy and investment behavior", American Economic Review 57(3, June):391-414. Hart, O. (1995), Firms, Contracts and Financial Structure, Clarendon Lectures in Economics (Oxford University Press, Oxford). Hassett, K.A., and R.G. Hubbard (1996a), "New evidence concerning the openness of the world market for capital goods", mimeograph (Board of Governors of the Federal Reserve System, June). Hassett, K.A., and R.G. Hubbard (1996b), "Tax policy and investment", Working Paper No. 5683 (NBER, July). Hayashi, E (1982), "Tobin's marginal Q and average Q: a neoclassical interpretation", Econometrica 50(1, January):213-224. Hopenhayn, H.A. (1992), "Entry, exit, and firm dynamics in long run equilibrium", Econometrica 60:1127-1150. Hubbard, R.G. (1995), "Capital-market imperfections and investment", mimeograph (Columbia University). Jorgenson, D.W.. (1963), "Capital theory and investment behavior", American Economic Review 53(2, May):247-259. Jovanovic, B. (1997), "Obsolescence of capital", mimeograph (New York University, February). Kaplan, S.N., and L. Zingales (1997), "Do investment-cash flow sensitivities provide useful measures of financing constraints?, Quarterly Journal of Economics 112(1, February):169 216. Kiyotaki, N., and J. Moore (1997), "Credit cycles", Journal of Political Economy 105(2, April):211~48. Koyck, L.M. (1954), Distributed Lags and Investment Analysis (North-Holland, Amsterdam). KriegeL S. (1997), "The general equilibrium dynamics of investment, scrapping and reorganization in an economy with firm level uncertainty", mimeograph (Chicago, July). Leahy, J. (1993), "Investment in competitive equilibrium: the optimality of myopic behavior", Quarterly Journal of Economics 108:1105-1133. Meyer, J.R., and E. Kuh (1957), The Investment Decision: An Empirical Study (Harvard University Press, Cambridge, MA). Nickell, S.J. (1978), The Investment Decisions of Firms (Cambridge University Press, Oxford). Oliner, S.D., G.D. Rudebusch and D. Sichel (1995), "New and old models of business investment: a comparison of forecasting performance", Journal of Money, Credit and Banking 27:806-826. Pindyck, R.S. (1988), "Irreversible investment, capacity choice, and the value of the firm", American Economic Review 78(5, December):969-985. Ramey, G., and J. Watson (1996), "Contractual fragility, job destruction and business cycles", mimeograph (University of California at San Diego, June). Rivers, D., and Q.H. Vuong (1991), "Model selection tests for nonlinear dynamic models", Working paper No. 91-08 (University of Toulouse). Rotemberg, J.J. (1987), "The new Keynesian microfoundations", in: O.J. Blanchard and S. Fischer, eds., NBER Macroeconomics Annual 1987 (MIT Press, Cambridge, MA) 6~104. Rothschild, M. (1971), "On the cost of adjustment", Quarterly Journal of Economics 85(November): 605-622. Salter, W.E.G. (1960), Productivity and Technical Change (Cambridge University Press, Cambridge). Shapiro, M.D. (1986), "Investment, output, and the cost of capital", Brookings Papers of Economic Activity 1986(1):111 152.
862
R.J. Caballero
Simons, H.C. (1944), "Some reflections on syndicalism", Journal of Political Economy 52:125. Stock, J.H., and M.W Watson (1993), "A simple MLE of cointegrating vectors in higher order integrated systems", Econometrica 61(4, July):783-820. Tinbergen, J. (1939), "A method and its application to investment activity", in: Statistical Testing of Business Cycle Theories, vol. 1 (Economic Intelligence Service, Agathon Press, New York). Tobin, J. (1969), "A general equilibrium approach to monetary theory", Journal of Money, Credit and Banking 1:15-29. Williamson, O.E. (1979), "Transaction-cost economics: the governance of contractual relations", Journal of Law and Economics 22(2, October):233-261. Williamson, O.E. (1985), The Economic Institutions of Capitalism (Free Press, New York).
Chapter 13
INVENTORIES * VALERIE A. RAMEY
University of California - San Diego KENNETH D. WEST
University of Wisconsin
Contents Abstract Keywords Introduction 1. Sectoral and secular behavior of inventories 2. Two stylized facts about inventory behavior 2.1. Procyclical inventory movements 2.1.1. Illustrative evidence 2.1.2. A survey of results 2.2. Persistent movements in the inventory-sales relationship 2.2.1. Illustrative evidence 2.2.2. A survey of results
3. Linear quadratic models 3.1. Introduction 3.2. A model 3.3. A first-order condition 3.4. Whose inventories?
4. Decision rule 4.1. Introduction 4.2. Derivation of decision rule 4.3. Persistence in the inventory-sales relationship 4.4. Summary on persistence in the inventory-sales relationship
5. The flexible accelerator model
864 864 865 868 872 873 873 875 877 877 880 882 882 882 885 887 887 887 888 891 892 893
* We thank the National Science Foundation and the Abe Foundation for financial support; Clive Granger, Donald Hester, James Kahn, Anil Kashyap, Linda Kole, Spencer Krane, Scott Schuh, Michael Woodford and a seminar audience at the University of Wisconsin for helpful comments and discussions; and James Hueng and especially Stanislav Anatolyev for excellent research assistance. Email to: kdwest @ facstaff, wisc. edu; vrameyOweber, ucsd. edu.
Handbook of Macroeconomics, Volume 1, Edited by J.B. Taylor and M. Woodford © 1999 Elsevier Science B.V. All rights reserued 863
864 6. Dynamic responses 7. Empirical evidence 7.1. Introduction 7.2. Magnitude of cost parameters 7.3. Shocks 7.4. Interpretation 8. Directions for future research 8.1. Introduction 8.2. Inventories in production and revenue functions 8.3. Models with fixed costs 8.4. The value of more data 9. Conclusions Appendix A. Data Appendix Appendix B. Technical Appendix B.1. Solution of the model B.2. Computation of E(Q2 - S2) B.3. Estimation of B.4. Social planning derivation of the model's first-order conditions References
V.A. Ramey and K.D. West
894 902 902 903 906 906 909 909 909 910 911 912 913 914 914 919 919 919 920
Abstract We review and interpret recent work on inventories, emphasizing empirical and business cycle aspects. We begin by documenting two empirical regularities about inventories. The first is the well-known one that inventories move procyclically. The second is that inventory movements are quite persistent, even conditional on sales. To consider explanations for the two facts, we present a linear-quadratic model. The model can rationalize the two facts in a number o f ways, but two stylized explanations have the virtue o f relative simplicity and support from a number o f papers. Both assume that there are persistent shocks to demand for the good in question, and that marginal production cost slopes up. The first explanation assumes as well that there are highly persistent shocks to the cost o f production. The second assumes that there are strong costs of adjusting production and a strong accelerator motive. Research to date, however, has not reached a consensus on whether one of these two, or some third, alternative provides a satisfactory explanation o f inventory behavior. We suggest several directions for future research that promise to improve our understanding o f inventory behavior and thus o f business cycles.
Keywords J E L classification: E22, E32
Ch. 13:
Inventories
865
Introduction In developed countries, inventory investment typically averages less than one-half of one percent of GDP, whereas fixed investment averages 15% of GDP and consumption two-thirds. Perhaps with these fractions in mind, macroeconomists have concentrated more on the study of consumption and fixed investment than on inventories. Inventories generally do not appear as separate variables in dynamic general equilibrium models, nor in exactly identified vector autoregressive models. It has long been known, however, that other ways o f measuring the importance of inventories suggest that inventories should receive more attention, especially in business cycle research. Half a century ago, Abramowitz (1950) established that US recessions prior to World War II tended to be periods of inventory liquidations. Recent experience in the G7 countries indicates this regularity continues to hold, and not just for the USA. In six of the seven G7 countries (Japan is the exception), real GDP fell in at least one recent year. Line 2 of Table 1 shows that in five of those six countries (the United Kingdom is now the exception), inventory investment also declined during the period of declining GDP, accounting in an arithmetical sense for anywhere 12-71% of the fall in GDE And Table 1 's use of annual data may understate the inventory contribution: Table 2 indicates that for quarterly US data, the share is 49 rather than 12% for the 1990-1991 recession, with 49 a typical figure for a post-War US recession. Such arithmetical accounting of course does not imply a causal relationship. But it does suggest that inventory movements contain valuable information about cyclical fluctuations. In this chapter, we survey and interpret recent research on inventories, emphasizing empirical and business cycle aspects. Among other points, we hope to convince the reader that inventories are a useful resource in business cycle analysis. They may be effective in identifying both the mechanisms of business cycle propagation and the sources o f business cycle shocks. Our chapter begins by documenting two facts about inventories. The first is the well-known one that inventories move procyclically. They tend to be built up in expansions, drawn down in contractions. The second, and not as widely appreciated, fact is that inventory movements are quite persistent, even conditional on sales. In many data sets, inventories and sales do not appear to be cointegrated, and the firstorder autocorrelations of supposedly stationary linear combinations of inventories and sales are often around 0.9, even in annual data. To consider explanations for the two facts, we use a linear quadratic/flexible accelerator model, which is the workhorse for empirical research on inventories. In our model, one source of persistence is from shocks to demand for the good being put in inventory - "demand" shocks. ("Demand" is in quotes because we, and the literature more generally, do not attempt to trace the ultimate source of such shocks; for example, for an intermediate good, the shocks might be driven mainly by shocks to the technology of the industry that uses the good in production.) But even if this shock has a unit root, our model yields a stationary linear combination of inventories
V.A. Ramey and K.D. West
866
Table 1 Arithmetical importance of inventory change in recessions of the 1990s (annual data)a Country
Canada France
(1) Peak year trough year b (2) Peak-~ough change in inventory change as percentage ofpeak-to-~oughfallin GDP c
West Italy Japan Germany
UK
USA
1989 1991
1992 1993
1992 1993
1992 1993
n.a.
1990 1992
1990 1991
50
71
19
30
n.a.
-0.
12
a The figures are based on annual real data. The inventory change series is computed by deflating the annual nominal change in inventories in the National Income and Product Accounts by the GDP deflator; see the Data Appendix. b The trough year was found by working backwards from the present to the last year of negative real GDP growth in the 1990s. There were no such years in Japan. The peak year is the last preceding year of positive real GDP growth. c Computed by multiplying the following ratio by 100: inventory change in trough year-inventory change in peak year GDP in trough year- GDP in peak year By construction, the denominator of this ratio is negative. A positive entry indicates that the numerator (the change in the inventory change) was also negative. The negative entry for the United Kingdom indicates that the change in the inventory change was positive.
Table 2 Arithmetical importance of inventory changes in post-war US recessions (quarterly data) a Peak quarter-trough quarter
Peak-to-trough inventory change as a percentage of peak-to-trough fall in GDP
1948:4-1949:2
130
1953:2-1954:2
41
1957:1-1958:1
21
1960:1-1960:4
122
1969:3-1970:1
127
1973:4-1975:1
59
1980:1-1980:3
45
1981:3-1982:3
29
1990:2-1991:1 b
49
a The figures are based on quarterly real data. See the notes to Table 1 for additional discussion. b The figure for the 1990-1991 recession differs from that for the USA in Table 1 mainly because quarterly data were used. It also differs because in this table the inventory change is measured in chain weighted 1992 dollars, whereas Table 1 uses the nominal inventory change deflated by the GDP deflator.
Ch. 13: Inventories
867
and sales. This stationary linear combination can be considered a linear version of the inventory-sales ratio. We call it the inventory-sales relationship. And our second inventory fact is that there is persistence in this relationship. While the model is rich enough that there are many ways to make it explain the two facts, we focus on two stylized explanations that have the virtue of relative simplicity, as well as empirical support from a number of papers. Both explanations assume a upward sloping marginal production cost (a convex cost function). The first explanation also assumes that fluctuations are substantially affected by highly persistent shocks to the cost of production. Cost shocks will cause procyclical movement because times of low cost are good times to produce and build up inventory, and conversely for times of high cost. As well, when these shocks are highly persistent a cost shock that perturbs the inventory-sales relationship will take many periods to die off, and its persistence will be transmitted to the inventory-sales relationship. The second explanation assumes that there are strong costs of adjusting production and a strong accelerator motive. The accelerator motive links today's inventories to tomorrow's expected sales, perhaps because of concerns about stockouts. Since sales are positively serially correlated, this will tend to cause inventories to grow and shrink with sales and the cycle, a point first recognized by Metzler (1941). As well, with strong costs of adjusting production, if a shock perturbs the inventory-sales relationship, return to equilibrium will be slow because firms will adjust production only very gradually. Both explanations have some empirical support. But as is often the case in empirical work, the evidence is mixed and ambiguous. For example, the cost shock explanation works best when the shocks are modelled as unobservable; observable cost shifters, such as real wages and interest rates, seem not to affect inventories. And the literature is not unanimous on the magnitude of adjustment costs. While the literature has not reached a consensus, it has identified mechanisms and forces that can explain basic characteristics of inventory behavior and thus of the business cycle. We are optimistic that progress can continue to be made by building on results to date. Suggested directions for future research include alternative ways of capturing the revenue effects of inventories (replacements for the accelerator), alternative cost structures and the use of price and disaggregate data. The chapter is organized as follows. Section 1 presents some overview information on the level and distribution of inventories, using data from the G7 countries, and focussing on the USA. We supply this information largely for completeness and to provide a frame of reference; the results in this section are referenced only briefly in the sequel. Section 2 introduces the main theme of our chapter (business cycle behavior of inventories) by discussing empirical evidence on our two facts about inventories. Procyclical movement is considered in Section 2.1, persistence in the inventory-sales relationship in Section 2.2. In these sections, we use annual data from the G7 countries and quarterly US data for illustration, and also summarize results from the literature.
868
V.A. Ramey and K.D. West
Sections 3 - 7 develop and apply our linear quadratic/flexible accelerator model. Sections 3-5 present the model. Much o f the analysis in these three sections relates to the process followed by the inventory-sales relationship, because this process has not received much direct attention in existing literature. The discussion focuses on analytical derivations, for the most part deferring intuitive discussion about how the model works to Section 6. That section aims to develop intuition by presenting impulse responses for various configurations o f parameters. Section 7 reviews empirical evidence from studies using the model. In Section 8, we discuss extensions and alternative approaches, including models that put inventories directly in production and profit functions, models with fixed costs, and the use o f different data. Section 9 concludes. A Data Appendix describes data sources, and a Technical Appendix contains some technical details.
I. Seetoral and secular behavior of inventories In this section we use basic national income and product account data from the G7 countries, and some detailed additional data from the USA, to provide a frame of reference for the discussion to come. As just noted, for the most part this is background information that will not loom large in the sequel. Lines 1(a) and 1(b) of Table 3 present the m e a n and standard deviation of the real annual change in economy wide inventory stocks in the G7 countries, over the last 40 years. These were computed from the national income and product account data on Table 3 Basic inventory statistics Canada
France
West Germany
Italy
Japan
UK
USA
(1) Annual NIPA change in inventories, 1956 1995a,b (a) Mean
2.32
37.4
12.3
12.3
2.41
1.81
23.6
(b) Standard deviation
3.91
40.1
12.7
9.8
1.44
3.04
21.6
(2) Reference: 1995 GDP c
721
6882
2608
1351
453
584
6066
(3) 1995 Inventory leveld
131
n.a.
411
n.a.
71
104
971
a The inventory change series is computed by deflating the annual nominal change in inventories in the National Income and Product accounts by the GDP deflator; see the Data Appendix. Units for all entries are billions (trillions, for Italy and Japan) of units of own currency, in 1990 prices. b Sample periods are 1957-1994 for West Germany and 1960-1994 for Italy, not 1956-1995. c GDP entries for Italy and Germany are for 1994, not 1995. d The "level" entries for Canada, West Germany, Japan and the UK are computed by deflating the nominal end of year value by the GDP deflator; see the Data Appendix. The entry for the US is the Department of Commerce constant (chained 1992) dollar value for non-farm inventories, rescaled to a 1990 from a 1992 base with the GDP deflator.
869
Ch. 13." Inventories
Table 4 Sectoral distribution of US non-farm inventories a,b (1) Percent of total level, 1995
(2) Mean (s.d.) of change
(3) Mean (s.d.) of growth
100
21.4 (22.5)
3.5 (3.5)
37
7.0 (11.6)
2.8 (4.2)
Finished goods
13
2.5 (4.4)
3.0 (4.8)
Work in process
12
2.3 (5.9)
2.8 (6.0)
Raw materials
12
2.2 (5.4)
2.6 (6.2)
52
12.2 (13.4)
4.4 (4.5)
Retail
26
5.9 (10.3)
4.2 (6.7)
Wholesale
26
6.2 (7.3)
4.5 (4.8)
11
2.2 (5.1)
3.1 (5.8)
Total Manufacturing
Trade
Other
a Data are in billions of chained 1992 dollars, 1959:I-1996:IV. b The inventory change differs from the US data on changes in Tables 1 7 in coverage (Tables 1-3 include changes in farm inventories), in sample period (195%1996 here, 1956-I995 in Table 3) and in base year (1992 here and Table 2, 1990 in Tables 1 and 3). the change in aggregate inventories. See the notes to the table and the Data Appendix for details. Upon comparing line 1(a) to line 2, we see that in all seven countries, the average change in inventories is small, about one percent o f recent GDP in Italy, well less than that in other countries. Inventory changes are, however, reasonably volatile, with the standard deviation roughly as large as the mean in all seven countries. We have less complete data on the level (as opposed to the change) o f inventory stocks. Line 3 o f Table 3 indicates that in the countries for which we have been able to obtain data, total inventories are about one-sixth o f GDP. This implies a monthly inventory-sales ratio o f about 2, a value that will be familiar to those familiar with monthly US data. Table 4 has a breakdown o f US non-farm inventories by sector. We see in column 1 that about h a l f o f non-farm inventories are held by retailers and wholesalers (including
V.A. Ramey and K.D. West
870 I
I
I
I
I
I
,I
I
I
I
I
06
o6
.9
~
current dollars
h
A
4
.8
,7
,'\ ,..,,,,',,,",
,,.
.6 "t " ~ ""
""~
•
'
chained 1992 dollars
,5
56
6b
66
76
year
ob
Fig. 1. Quarterly ratio of nonfarm inventories to final sales.
non-merchant wholesalers who are associated with particular manufacturers), whereas somewhat over a third are held by manufacturers. The remaining "other" category reflects holdings by a number of industries, including utilities, construction, and service companies. Like the aggregates in Table 3, investment in each of the components is positive on average, and has standard deviations about the same size as means. This applies whether one looks at arithmetic changes (column 2) or growth rates (column 3). For future reference, it will be useful to note that manufacturers' inventories of finished goods, which have received a fair amount of attention in the inventory literature, are only 13% of total inventories, and are not particularly volatile. Figure 1 plots the ratio of total non-farm inventories to final sales of domestic product. The dashed line uses real data (ratio of real inventories to real sales), the solid line nominal data. In the real data, the inventory series matches that in line 1 of Table 4, but over the longer sample 1947:I-1996:IV (Table 4 uses the 1959-1996 subsample because the disaggregate breakdown is not available 1947-1958.) The real ratio shows a run-up in the late 1960s and early 1970s, followed by a period of slight secular decline. At present, the ratio is modestly above its value at the start of our sample (0.63 vs. 0.56). It will be useful to note another fact for future reference. The figure suggests considerable persistence in the inventory-sales ratio, an impression borne out by estimates of first-order autocorrelations. These are 0.98 for the sample as whole, 0.93 if the autocorrelation is computed allowing for a different mean inventory-sales ratio for the 1947:I-1973:IV and 1974:I-1996:IV subsamples.
871
Ch. 13: Inuentories I 1096.7
I
I
I
I
-
.pi
.S I
I
E
20t.8 3513
'
17A3.97
final sales of domestic business
Fig. 2. Quarterly inventories and sales, 1947:1-1996:4, in billions of chained 1992 dollars.
Readers familiar with the monthly inventory-sales ratios commonly reported in the US business press may be surprised at the absence of a downward secular movement. Such monthly ratios typically rely on nominal data. The solid line in Figure 1 shows that the ratio of nominal non-farm inventories to nominal sales of domestic product indeed shows a secular decline. Evidently, the implied deflator inventories has not been rising as fast as that for final sales. We do not attempt to explain the differences between the nominal and real series. We do note, however, the nominal ratio shows persistence comparable to that of the real ratio. The estimate of the firstorder autocorrelation of the ratio is 0.97 whether or not we allow a different mean inventory-sales ratio for the 1947:I-1973:IV and 1974:I-1996:IV subsamples. To return to the secular behavior of the real series: we see from column 3 in Table 4 that the rough constancy of the overall ratio hides some heterogeneity in underlying components. In particular, raw materials, and to a lesser extent, work in progress, have been growing more slowly than the aggregate, implying a declining ratio to final sales. This fact was earlier documented by Hester (1994), who noted that possible explanations include just-in-time inventory management, outbasing of early stages of manufacturing to foreign countries, and a transitory response to transitory movements in costs. In the sequel we do not attempt to explain secular patterns in inventory-sales ratios; see Hester (1994) for a discussion of US data, for retail as well as manufacturing, West (1992a) and Allen (1995) for discussions of Japanese data. Instead we hope that the reader will take the message away from these tables that inventories and sales are positively related in the long run: they tend to rise together. This is illustrated quite
872
V.A. Ramey and K.D. West
strikingly in Figure 2, which is a scatterplot o f the inventory and sales data. A second message in the tables and the autocorrelations reported above is that while inventory movements are small relative to GDP, they are volatile and persistent. Characterizing and explaining the stochastic, and especially business cycle, behavior o f inventories is the subject o f the rest o f this chapter.
2. Two stylized facts about inventory behavior Our essay focuses on the business cycle aspects o f inventory behavior, and is oriented around two stylized facts: (1) inventory movements areprocyclicaL (2) the inventorysales relationship is highly persistent (the inventory-sales relationship is our term for a linear version o f the inventory-sales ratio). These facts serve two purposes. First, they demonstrate the potential role o f inventories in understanding economic fluctuations. Second, they serve as a measure by which we j u d g e inventory models and, more generally, theories o f the business cycle. For each o f the two "facts", we present illustrative evidence from annual, postWorld War II data, for the G7 countries, as well as from quarterly post-War US data. We then review estimates from the literature. For the first o f our stylized facts (procyclical movements), Section 2.1.1 below presents estimates, Section 2.1.2 presents the review. Sections 2.2.1 and 2.2.2 do the same for the second o f our facts (persistence in the inventory-sales relationship). The remainder o f this introductory subsection describes the data used in both 2.1 and 2.2. For the G7 countries, we continue to use the aggregate (nation-wide) change in inventory stocks used in previous sections, and construct a time series o f inventory levels b y summing the change 1. We measure production as GDP and sales as final sales. The quarterly US inventory data are that used in the previous section, total non-farm inventory and final sales o f domestic product in chained 1992 dollars, and with sales measured at quarterly rates 2.
1 When we summed the AH t series, we initialized with H 0 _: 0. Given the tinearity of our procedures, the results would be identical if we instead used the AH t series to work forwards and backwards from the 1995 levels reported in Table 3. The reader should be aware that when prices are not constant, a series constructed by our procedure of summing changes typically will differ from one that values the entire level of stock at current prices. Those with access to US sources can get a feel for the differences by comparing the inventory change that figures into GDP (used in the G7 data, and in NIPA Tables 5.10 and 5.11) and the one implied by differencing the series for the level of the stock (used in our quarterly US data and NIPA Tables 5.12 and 5.13). 2 We repeated some of our quarterly calculations using final sales of goods and structures, which differs from total final sales because it excludes final sales of services. There were no substantive changes in results.
Ch. 13: Inventories
873
All of these measures are linked by the identity production = sales + (inventory investment), or
Qt = st +AHt,
(2.1)
where Qt is production, St are sales, and Ht is end of period t inventories. This relationship holds by construction, with St being final sales.
2.1. Procyclical inventory movements 2.1.1. Illustrative evidence Procyclicality o f inventory movements can be documented in several ways. A simple indication that inventories move procyclically is a positive correlation between inventory investment and final sales. Consider the evidence in Table 5. In column 1 we see that all the point estimates of the correlation are positive, with a typical value being 0.1-0.2. The correlation between sales and inventory investment is related to the relative variances of production and sales. As in Table 5, let "var" denote variance, "cov" covariance. Since (2.1) implies var(Q) = var(S) + var(AH) + 2 cov(S, AH), it follows from the positive correlation in column 1 that var(Q)> var(S) (column 2). Other indications of procyclical behavior include two variance ratios robust to the possible presence of unit autoregressive roots. The column 3 estimates indicate that var(AQt)/var(ASt)> 1, the column 4 estimates that E(Q2-S2t)>O. [E(Q~-S~) is essentially an estimate of var(Q)-var(S) robust to the presence of unit autoregressive roots; see the Technical Appendix.] To illustrate the pattern of correlation over different short-run horizons, we present impulse response functions. The responses are based on a bivariate VAR in the level of inventories and sales for the quarterly US data, including eight quarterly lags, a time trend, and breaks in the constant and trend at 1974. In accordance with this section's aim of presenting relatively unstructured evidence, we present responses to a one standard deviation shock to the VAR disturbances themselves, and not to orthogonalized shocks. Figure 3 shows the responses of inventories and sales to a disturbance to the sales equation, Figure 4 the responses to a disturbance to the inventory equation. To prevent confusion, we note that on the horizontal axis, we plot the pre-shock (period - 1 ) values of the variables; the shock occurs in period 0. Figures 3 and 4 both show a positive comovement of inventories and sales. In Figure 3, by construction the contemporaneous (period 0) response of inventories is zero. But the 7 billion (approximately) dollar rise in sales in period 0 is followed in the next quarter by a 1.5 billion dollar increase in inventories. Inventories continue to rise for the next five quarters, even after sales turn down. Both series smoothly decline together. Figure 4 shows that after a 3 billion dollar shock to inventories, sales rise by nearly 2 billion dollars. Both inventories and sales subsequently show some wiggles.
874
V.A. Ramey and K.D. West
Table 5 Relative variability of output and final sales a-e Country
Period
(1) corr(S, AH)
(2) var(Q)/var(S)
(3) var(AQ)/ var(AS)
(4) 1 + [E(Q 2 - S 2)/ var(AS)]
Canada
1956 1995 1974-1995 1956 1995 1974-1995 1957-1994 1974-1994 1960-1994 1974-1994 1956-1995
0.14 0.17 0.17 0.32 0.12 0.13 0.13 0.11 0.23
1.16 1.21 1.36 1.63 1.10 1.08 1.30 1.27 1.07
1.53 1.55 1.65 2.09 1.36 1.27 1.81 1.83 1.10
1.41 1.24 1.68 1.41 1.01 1.03 1.12 1.08 1.30
1974-1995 1956-1995 1974-1995 1956-1995 1974-1995 1947:I-1996:IV 1974:I-1996:IV
0.51 0.28 0.26 0.26 0.25 0.30 0.14
1.15 1.21 1.17 1.19 1.21 1.26 1.13
1.08 1.52 1.38 1.48 1.50 1.39 1.40
1.12 1.10 1.04 1.12 0.98 1.41 1.48
France West Germany Italy Japan UK USA USA
a "var" denotes variance, "corr" correlation, Q = output, S = final sales, A H - change in inventories. The variables are linked by the identity Q = S + AH. b In all but the last row, data are annual and real (1990 prices), with Q=real GDP, S=real final sales, AH=real change in aggregate inventories. In the last row the data are quarterly and real (1992 prices), with S=final sales of domestic business goods and structures, AH=ehange in non-farm inventories, and Q _=S + AH. See the text and Data Appendix for sources. c In colmnns 1 and 2, Q and S were linearly detrended, with the full sample estimates allowing a shift in the constant and trend term in 1974 (1974:I in the last row); AH was defined as the difference between detrended Q and S. In columns 3 and 4, AQ and AS were simply demeaned, again with the full sample estimates allowing a shift in the mean in 1974 (1974:I). d In column 4, the term E(Q 2 - S 2) essentially is the difference between the variance of Q and the variance of S, computed in a fashion that allows for unit autoregressive roots in Q and S. See the Technical Appendix for further details. e The post-1973 sample, as well as the post-1973 shifts in the full sample estimates, were included to allow for the general slowdown in economic activity.
This s h o c k a p p e a r s to h a v e m o r e p e r s i s t e n t e f f e c t s t h a n does the sales s h o c k , w i t h i n v e n t o r i e s still over 2 b i l l i o n dollars a b o v e t h e i r initial level after six years. T h e i m p o r t a n t p o i n t is t h a t b o t h sets o f i m p u l s e r e s p o n s e f u n c t i o n s offer t h e s a m e p i c t u r e o f p r o c y c l i c a l i n v e n t o r i e s as t h e statistics i n Table 5. T h u s , i n v e n t o r i e s s e e m to a m p l i f y r a t h e r t h a n m u t e m o v e m e n t s i n p r o d u c t i o n .
Ch. 13. Inventories
875 I
I
I
I
I
I
I
Ig
2b
2~
I
I
I
lg
2b
2a
8.7077
v,%.
o~ 01
/ o
~
inventories
/
,--4
/ i ...........................................
~
o
~
~
quarter
Fig. 3. Response to sales equation shock, quarterly VAR. I
5.01083
I
I
I
/ " ~__ inventories d \ /.f-~
f_
(7} 01
d
~
quarter
Fig. 4. Response to inventory equation shock, quarterly VAR. 2.1.2. A survey o f results
As many readers no doubt are aware, similar findings have been reported for many though not all data sets. A brief summary of estimates o f variance inequalities in studies using aggregate data: Fukuda and Teruyama (1988) report comparable results
876
V.A. Ramey and K.D. West
for industrialized countries, but also conclude that by contrast in less developed countries GDP tends to be smoother than final sales 3. Beaulieu and Miron (1992) report that in manufacturing in some industrialized countries, seasonals in production are no less variable than those in sales. For US quarterly economy-wide or monthly two-digit manufacturing data, the pattern is as pronounced as in Table 5. This applies first of all to demeaned or detrended data such as is reported in Table 5. For example, Blinder (1986a) reports var(Q)/var(S) > 1 for 18-20 two-digit manufacturing industries. It also applies to deterministic seasonals [West (1986), Miron and Zeldes (1988), Cecchetti et al. (1997)]: in US manufacturing, seasonal variation in production tends to be larger than seasonal variation in sales 4. Finally, for both deterministic and stochastic terms, studies that have taken sampling error into account sometimes but not always find it quite unlikely that sampling error alone accounts for the lack o f evidence production smoothing [West (1986, 1990b)]. Does aggregation substantially account for the lack of production smoothing evident in these studies, either because o f measurement error in aggregate data sets, or heterogeneity across firms? Probably not. It has been argued persuasively that disaggregate data measured in physical units are more accurate than the aggregate data used in most studies [see Fair (1989), Krane and Braun (1991), and Ramey (1991)] 5 But as summarized below, studies with disaggregate data still find production more variable than sales in many cases. For evaluation of the effects o f firm heterogeneity, analytical arguments are not particularly helpful. I f var(Q) > var(S) for a single firm, the inequality may be shown analytically to apply to an aggregate o f firms if each individual firm solves a linear quadratic problem such as the one presented below with identical parameters, regardless o f the correlation o f demand shocks across firms [West (1983)]. But if the cost functions are different for different firms, analytical results appear not to be available. Lai (1991) and Krane (1994) show by example that aggregate variance ratios might differ substantially from individual firm ratios. And even if we assume identical parameters across firms, which as just noted implies that var(Q)/var(S)<~ 1 in the aggregate, this aggregate ratio may be larger (or smaller) than that o f individual firms, with the direction o f the bias depending on the correlation across firms of demand shocks. So to consider possible biases from aggregation we must turn from analytical to empirical studies of data disaggregated to the firm or perhaps physical product level.
3 So far as we know, there have been no systematic attempts to explain this finding. It is possible that measurement error plays a large role. 4 Carpenter and Levy (1998) report a related finding: for manufacturing, the spectra of inventory investment and production show very high coherence at seasonal frequencies. 5 And the G7 data that we use for illustration are among the worst measured. In some countries, the change in inventories apparently is constructed at least initially as the difference between product and income estimates of GDP, and thus includes the statistical discrepancy. See West (1990a).
Ch. 13." Inventories
877
The disaggregate picture is broadly similar though less striking than the aggregate one, at least in the relatively well-studied USA. Production smoothing is markedly absent in the automobile industry [Blanchard (1983), Kashyap and Wilcox (1993)]. But Krane and Braun (1991) found production is less variable than sales in about two thirds of a set of 38 physical products. Finally, Schuh (1996) found deseasonalized production less variable than deseasonalized sales in only one fourth of 700 manufacturing firms; deterministic seasonals in production were less variable than those in sales in about half the firms. For the deseasonalized data, Schuh reports that the median ratio of production to sales variance was about 1.1, which is consistent with the US figure reported in column 2 of Table 5. 2.2. Persistent movements in the inventory-sales relationship Our second stylized fact is that the inventory-sales relationship is highly persistent. While there may be a steady state linear relationship between inventories and sales, movement towards that steady state is very slow. This characteristic may be more recognizable to inventory experts if it is stated as a "slow speed of adjustment"; a link between persistence in the inventory-sales relationship and the speed of adjustment is demonstrated formally in Sections 4 and 5 below. Section 2.2.1 illustrates this with the annual G7 and quarterly US data used above, Section 2.2.2 documents it with citations to various papers. 2.2.1. Illustrative evidence To illustrate persistence, we use a standard technique described in the Technical Appendix to attempt to find a stationary relationship between the levels of inventories and sales. This yields Ht - ~OSt for a parameter 0 estimated from the data. Those familiar with the literature on cointegration will recognize Ht - OSt as the (estimated) error-correction term if inventories and sales have unit autoregressive roots and are cointegrated. We refer to H t - OSt as the inventory-sales relationship, sinee it is a generalized linear version of the inventory-sales ratio. More precise terminology for this variable is "deviation from the long-run inventory-sales relationship." In our view, the disadvantages of the length of this term outweigh the advantages of being more precise. After obtaining 0, we estimate the first two autocorrelations in the putatively stationary variable Ht - "OSt, to gauge the extent of persistence in the relationship. We emphasize that our aim is merely to document quickly evidence of high persistence, not to work towards a complete time series model, nor even to endorse the use of unit roots as a modeling device; among other tasks, the latter would require testing for unit roots in Ht and St, perhaps allowing for a one-time shift in mean in 1974, and so on. Rather, this is a way of organizing facts and theories about inventories that has some rough plausibility for a wide range of data.
878
V..A. Ramey and K.D. West
Table 6 Persistence in stationary linear combinations of inventories and sales a,b Country
Period
(1) Estimate of cointegrating parameter 0
(2) First two autocorrelations of H t - OSt
Canada
1956-1995
0.16
0.92
0.82
France
1956-1995
0.31
0.95
0.89
West Germany
1957 1994
0.27
0.93
0.82
Italy
1960 1994
0.45
0.88
0.80
Japan
1956-1995
0.22
0.97
0.91
UK
1956-1995
0.20
0.95
0.87
USA
1956-1995
0.24
0.88
0.82
USA
1947:I-1996:IV
0.68
0.94
0.88
USA
1947:~1996:IV, H and S in logs
1.12
0.95
0.90
a See notes to Table 5 for description of data and variable definitions. b In the inventory-sales relationship H t - O S t , the estimate 0 is obtained with the Stock and Watson (1993) procedure to estimate a cointegrating vector. Details are in the Technical Appendix. If the inventory and sales series have unit autoregressive roots, the adjective "stationary" used in the title to this table applies only if the inventory and sales series in fact are cointegrated, and then only asymptotically.
Table 6 p r e s e n t s results. T h e T e c h n i c a l A p p e n d i x d e s c r i b e s c o m p u t a t i o n a l details. C o l u m n s 1 a n d 2 p r e s e n t the e s t i m a t e s o f 0 a n d t h e first two a u t o c o r r e l a t i o n s o f H t - OSt. I n c o l u m n 1, the e s t i m a t e s o f 0 are all p o s i t i v e , s u g g e s t i n g t h a t i n v e n t o r i e s a n d sales m o v e t o g e t h e r p o s i t i v e l y in t h e l o n g r u n 6. B u t e v e n i f this is the case, the result t h a t w e w i s h to e m p h a s i z e is in c o l u m n 2: all o f the first-order a u t o c o r r e l a t i o n s are a b o v e 0.8. T h e r e is o f c o u r s e a d o w n w a r d b i a s i n e s t i m a t e s o f a u t o c o r r e l a t i o n s n e a r 1, a n d a n a d d i t i o n a l b i a s i m p a r t e d b y t i m e a g g r e g a t i o n (recall t h a t t h e d a t a are a n n u a l or q u a r t e r l y r a t h e r t h a n m o n t h l y ) . T h e c o l u m n 2 e s t i m a t e s t h u s s u g g e s t that m e a n r e v e r s i o n takes p l a c e quite s l o w l y 7.
6 The technique used is not invariant to normalization. For the annual data, we re-estimated with S t on the left instead of H t. Positive estimates of (1/0) resulted. On the other hand, if time trends are
included, negative estimates of 0 result for 4 of the 7 annual data sets. 7 Consistent with the high autocorrelation, the null of no cointegration cannot be rejected at the 5% level in three of the seven annual data sets (Canada, Japan, USA), nor in the quarterly US data. This suggests that for these three countries an appropriate model might be one in which there is no steady-state linear relation between inventories and sales. As we shall see, the model to be presented rationalizes such lack of a steady state with unit root cost shocks. When we quickly investigated the extent to which a onetime change in regime in 1974 could account for the persistence, we got mixed results. With post-1974 annual data, the autocorrelations fell; what is perhaps notable is that in one case (the USA) the fall was dramatic, to 0.28 (vs. the 0.88 reported in Table 6). Next, using the quarterly data, we re-estimated using
Ch. 13: Inventories
879
I
I
I
I
I
I
I
P-_ B.7077
B.7077 P-_ I/ -4.58753
inventory-sales relationship
V' quapteP Fig. 5. Response to sales equation shock, quarterly VAR.
We note that this g e n e r a l i z a t i o n applies w h e n we use logs instead o f levels o f inventories and sales (last r o w o f the table). We noted above that the i n v e n t o r y - s a l e s ratio displays h i g h autocorrelations. The upshot o f the last row is that transforming to logs, and a l l o w i n g 0 ¢ 1 - that is, considering not log(Hi~St) but log(Ht/S °) for a freely estimated 0 - still suggests considerable persistence 8. To illustrate the persistence f r o m a different perspective, Figures 5 and 6 depict the response o f sales and the i n v e n t o r y - s a l e s relationship to shocks, u s i n g the same V A R estimated for Figures 3 and 4. The sales responses are identical to those in Figures
the whole sample but allowing for different means in the 1947:I-1973:IV and 1974:I-1996:IV sample. This reduced the estimate only slightly, to 0.89 and 0.94 (vs. the 0.94 and 0.95 values in Table 6). Rossana (1998) carefully investigates the question of stability in two-digit US data. He finds evidence of instability, and lack of cointegration within subsamples. s Now seems an appropriate time to comment on the use of logs versus levels of the data, in response to comments by two of the readers of an earlier version of this paper. Much empirical work in inventories, and a distinct majority of work using intertemporal dynamic models, has relied on levels rather than logarithms of the variables in question. We follow that convention in most of this paper. Working in levels has the advantage of preserving the identity that links inventories, production and sales [see Equation (2.1)]. In addition, inventory investment, as reported by the National Income and Product Accounts, is defined as the change in the level of inventories, and is frequently negative, which further discourages the use of logarithms. In a few cases, such as in the last row of Table 6, we do use logarithms. That little turns on levels versus logs is suggested by the similarity of the results in the last two rows in Table 6, and, more generally of the review of the literature that we are about to present: flexible accelerator studies typically use data in logs, while linear quadratic studies typically use levels. Both find great persistence.
V.A. Ramey and K.D. West
880 I
3.74996
~ . ,,'~'~
I
I
I
I
I
~
~4 "0 t~ t~ O~ ~4
0
quapter, Fig. 6. Response to inventoryequation shock, quarterlyVAR. 3 and 4. The inventory-sales relationship is computed using the estimated value of = 0.68 from Table 6 to form a linear combination of the impulse response functions for sales and inventories. In response to a positive one standard deviation shock to the sales equation, inventories rise, but less rapidly than do sales (see Figure 3). This induces the fall in the inventory-sales relationship depicted in Figure 5. Eventually, inventories build up more rapidly, leading to overshooting and an increase relative to the initial position. Since both inventories and sales are close to their pre-shock values after six years (see Figure 3), the inventory relationship returns as well, as Figure 5 shows. By contrast, a shock to the inventory equation leads to a complicated pattern displaying more persistence. The inventory-sales relationship rises initially by construction, and then declines erratically for eight quarters before briefly rising again and then slowly decaying. At the end of six years, a return to the pre-shock value is not evident: these unrestricted VAR estimates suggest great persistence in the inventory-sales relationship. 2.2.2. A suruey o f results
Table 6 and Figures 5 and 6 suggest that there is little mean reversion in economywide inventory-sales relationships. Congruent evidence comes from two sources, unstructured tests such as in Table 6, and structural estimates of what is called a "speed of adjustment". Consider first the unstructured tests. Using quarterly economy-wide data, West (1990b, 1992b) cannot reject the null of no cointegration for the USA and for
Ch. 13: Inventories
881
Japan. Using monthly US data, Granger and Lee (1989) find only mild evidence for cointegration in monthly two-digit manufacturing and trade series; fewer than a third of their 27 data sets reject the null of no cointegration at the 5% level, and the median first-order autocorrelation of the putatively stationary linear combination of inventories and sales is about 0.99. Rossana (1993, 1998) uses similar data and allows a vector of cost variables W t to enter the cointegrating relationship. He uses regression techniques to search for a combination H t - OSt - otI W t that is stationary. Wt is defined to include real wages, real materials prices, nominal interest rates and inflation. In the end, however, he finds mixed evidence of cointegration across H t , St and Wt. (He does not report autocorrelations o f stationary linear combinations.) In addition, a large literature has used structural inventory models to estimate the "speed of adjustment". We shall describe such models below. For the moment, what is relevant is that under conditions described below, a slow speed of adjustment is equivalent to persistence in the inventory-sales relationship. Let p be the largest autoregressive in H t - OSt, or H t - OSt - ct~Wt, with the latter variable the relevant one if, as in the Rossana (1993, 1998) papers cited above, a vector of cost variables is entered into the cointegrating relationship. The large empirical literature has estimated inventory equations, with results implying that ~ is near 1. A typical value in quarterly data is around 0.8-0.95. The following are some examples. Using quarterly economy-wide data for some industrialized countries, Wilkinson (1989) found ~ - 0.75-1.0, with W t including one or more of: sales shocks, inflation, wages, raw materials prices and capacity utilization. Similar results have repeatedly been found using monthly or quarterly US manufacturing data. Examples include Maccini and Rossana (1981), Blinder (1986b), and Haltiwanger and Maccini (1989). In these papers, Wt included one or more of: factor prices such as wages, raw materials prices and real and nominal interest rates, other factors of production such as labor, and sales expectational errors. Does aggregation across heterogeneous firms substantially account for this high serial correlation? We are not aware of analytical arguments establishing genera] conditions under which aggregate estimates of p will be higher than typical firmspecific estimates, though no doubt such arguments could be constructed. Simulations in Lovell (1993) and a limited amount of empirical evidence suggests that aggregation does impart a bias. Schuh (1996) reports that for monthly data for 700 manufacturing firms, the median estimate of p is about 0.6 (Wt includes a real interest rate); for quarterly data for some publicly owned firms, and with Wt including measures of credit conditions, ~ is reported to be about 0.6-0.8 by Carpenter et al. (1994, 1998), although a somewhat higher value of about 0.9 is found by Kashyap et al. (1994)10 9 The autocorrelation was computed from the Durbin-Watson statistic reported in the last column of Table II in Granger and Lee, using 2(1 -~) = d.w. 10 A small literature has discussed how estimation ofp is affected when the decision interval for firms is smaller than the sampling interval of the data [Christiano and Eichenbaum (1989), Jorda (1997)]. Such time aggregation does not appear capable of explaining the high persistence.
882
V.A. Ramey and K.D. West
Of course, tests for cointegration have notoriously low power. And there is heterogeneity of estimates o f p implied by the flexible accelerator literature. But these results suggest that there is little evidence that mean reversion of Ht - OSt towards its mean takes place rapidly, and considerable evidence of persistence. To interpret such persistence, as well as the procyclical behavior discussed in the previous section, we now present a standard inventory model.
3. Linear quadratic models 3.1. Introduction
The linear quadratic inventory model dates back to Holt et al. (1960). Although this book is written in an operations research style that suggests that its main aim was to provide practical advice to managers, it may still be profitably reviewed by economists interested in inventory behavior. In fact, Holt et al. (1960) develop models more general than those in many of the applications we review here: they allow for stockout costs, order backlogs, and stochastic variation in costs. Early uses of a linear quadratic model to interpret macro data include Childs (1967) and Belsley (1969). Tools developed in the 1970s and 1980s to estimate and interpret decision rules and first-order conditions from rational expectations models [e.g., Hansen and Sargent (1980), Hansen and Singleton (1982)] were subsequently used by many authors to estimate one or another version of the model. Some papers used aggregate data (sometimes economy wide, sometimes at the two-digit level); some used data at the level of individual firms or physical products. It is this more recent literature that we review in this and the next four sections. The focus of this literature, and of our discussion, is on how production parameters and constraints influence the intertemporal interaction between production, sales and inventories. While different papers of course vary in the details of the model, there is sufficient commonality that the model presented in Section 3.2 may fairly be described as representative. Section 3.3 derives a first-order condition. Section 3.4 discusses whether the model is applicable to a wide range of inventories. Table 7 lists notation, and may be a useful reference in this and subsequent sections. 3.2. A model
We assume that a firm maximizes the present value of future cash flows. In macro applications this will be a representative firm. In the formal statement of the model about to be given, we omit constant, linear and trend terms for notational simplicity. Earlier work provides tediously detailed treatment o f such terms, allowing for trends that are either arithmetic [West (1983)] or geometric [working paper versions of West (1988, 1990b)].
Ch. 13:
Inventories
883 Table 7 Variable and parameter definitions a
A. Definitions of basic variables H t
inventories at end of period t
H t -H i
stationary linear combination o f l i t , S t and W t when Udt and W t have unit autoregressive roots, but Uct does not; H t - H i = H t - ( OS t + aI W t )
H t -- OS t
inventory-sales relationship
Qt
production in period t
St
sales in period t
Uct
cost shifters, Uct = ~ W t + uct
uct
cost shock, unobservable to the economist
Udt
demand shock, unobservable to the economist
Wt
vector of observable cost shifters
B. Definitions of basic parameters
Mnemonic
Description
a0
cost o f changing production
Section b 3.2
a1
cost o f production
3.2
a2
inventory holding cost
3.2
a3
accelerator term for inventories
3.2
b
discount factor
3.2
g
inverse of slope o f demand curve
4.2
a
a = - ( b a 2 ) ~(1- b ) a , coefficient vector on W t in H ;
3.3
coefficient vector on W t in Uct
3.2
0c
AR(1) coefficient of Uct , uct = 0cUct_l + ect
4.2
0d
AR(1) coefficient of Udt, Udt =0dUdt-I +edt
4.2
qSw
AR(1) matrix o f coefficients of W t , Wt = ~ w Wt 1 + ewt
4.2
0
= a 3 [al(1-b)/ba2] , coefficient on S t in H i
3.3
:~H
an autoregressive root in H t - H i when a 0 - 0
4.2
:v t, :v2
two autoregressive roots in H a H T when a 0 ~ 0
4.3
a All variables and parameters are scalars, with the exceptions of ewt, W t , a, ~t and q~w. The variables in panel A are introduced in Section 3.2. b Section where parameter is introduced.
W e u s e t h e f o l l o w i n g n o t a t i o n : P t is real p r i c e (say, r a t i o o f o u t p u t p r i c e to t h e w a g e ) , St
real sales, Q t real p r o d u c t i o n , H t
real e n d o f p e r i o d i n v e n t o r i e s , Ca real p e r i o d
c o s t s , b a d i s c o u n t f a c t o r , 0 ~< b < 1, a n d E t m a t h e m a t i c a l e x p e c t a t i o n s c o n d i t i o n a l o n
V.A. Ramey and K.D. West
884
information known at time t, assumed equivalent to linear projections. The objective function is T
max l i m r ~
Et Z
bj(Pt +ySt +j - Ct +j)
j-o subject
(3.1)
to ~ Ct = 0.5a0AQ 2 + 0.5alQ 2 + 0.5a2(Ht-i - a3St) 2 + U c t Q t ,
( Qt = St + He -
He 1.
The scalar Uct is a cost shock, and, as discussed below, may depend on both observable and unobservable variables. The term Pt +jSt +j is revenue. The analysis in this section does not depend on specification of demand or market structure, so we defer discussion o f P t + j S t +j until the next section.
The cost function Ct allows two possible roles for inventories. One is a production smoothing role, in which inventories facilitate intertemporal allocation of production. (N.B.: in much of the inventory literature, the phrase "production smoothing" references smoothing from demand shocks; we use it to reference smoothing from cost shocks as well.) This role is reflected in the terms in AQ 2 and Q2. The second role is a revenue role, in which inventories allow a firm to satisfy demand that cannot be backlogged. This role is reflected in the " a 3 S t " term in (Ht-1 - a3St)2; (He 1 - a 3 S t ) 2 induces an accelerator motive. In our discussion o f these terms, we assume for the moment that a~ and a2 are positive, ao and a3 nonnegative. The first production smoothing term, aoAQ2t, captures increasing costs of changing production and of production. This represents, for example, hiring and firing costs. Not all authors include this term, and, as discussed in Section 7, some empirical tests find estimates of ao insignificantly different from zero. The second production smoothing term, a~Q 2, reflects costs of production. It can be interpreted as the second order term in a quadratic approximation to an arbitrary convex cost function associated with a decreasing returns to scale technology. In data with trends, this approximation would likely be around a growth path. (Recall that constant and trend terms are omitted for notational simplicity.) The accelerator term a 2 ( n t - 1 - a 3 S t ) 2 embodies inventory holding and backlog costs. Consider first when a3 = 0, so that the term becomes a2H2t 1. Then this can be interpreted as the second order term in a quadratic approximation to an arbitrary convex inventory holding cost function. When a3 ~ 0, the term is intended to reflect backlog (stockout) and batch as well as inventory holding costs, and thus captures a revenue-related motive for holding inventories. Stockout costs arise when sales exceed the stock on hand, perhaps entailing lost sales, perhaps entailing delayed payment if orders instead are backlogged. Batch costs vary inversely with the stock of inventories, since fewer production runs and larger lot sizes imply larger inventory levels on average. Ceteris paribus, the higher the stock of inventories, the less likely is a stockout and the lower are stockout costs. As well, higher stocks result when the number of batches
Ch. 13: Inventories
885
falls, since lot sizes rise. On the other hand, higher stocks entail higher inventory holding costs. This quadratic term approximates the tradeoff between the two costs, with a3 rising as stockout costs rise relative to backlog costs. Holt et al.'s (1960) formal derivation o f this time invariant approximation to this inherently nonlinear, and timevarying, cost is presented in Section 8. Note in any case that in many applications, inventories are strictly positive and large relative to sales in all time periods, perhaps in some data sets because o f aggregation over heterogeneous firms. So in such data, careful treatment of nonlinearity may have limited empirical payoff. Section 8 below discusses alternative approaches. The final term in the cost function is UotQt. This captures exogenous stochastic variation in costs. (We omit terms o f the form cost shock x A Q t and cost shock × H t to avoid needless algebraic complications.) In some applications Uct = 0 and this shock is absent [West (1986)]; in others it is not observed by the economist and follows an exogenous process [Eichenbaum (1989)]; in still others it has both observable and unobservable components [Ramey (1991)]. To cover all three cases, we write Uct = a' W t + Uct.
(3.2)
In (3.2), Wt is a vector o f observable components; uot is unobservable to the economist and follows an exogenous process. In one or another paper, Wt includes variables such as real wages, materials prices and real and nominal interest rates. If there are no such components, W t - 0; if cost shocks are entirely absent, Uct =- 0 as well. For convenience we refer to uct as a "shock", even though it may be serially correlated and partially or fully observable. 3.3. A first-order condition
A n optimizing firm will not expect to increase cash flow by producing one more unit this period, putting the unit in inventory, and decreasing production by one unit next period, all the while holding revenue constant. Formally, upon differentiating the objective function (3.1) with respect to H t we obtain 11 E t [a0(AQ, - 2bAQt +1 + b 2zxQt+2) + a l (Qt - bQt+ l) + ba2 (Ht - a3S,+ 1) + Uct
b Uct+i ] = O.
(3.3) For discussion of the second o f our stylized facts (persistence in the inventory-sales relationship), it will be helpful to note a low frequency implication o f Equation (3.3), namely, that inventories and sales are cointegrated if St is I(1) and Uct is I(0). [Here,
11 The first-order condition derived assuming that [O(pt+jSt+j)/OHt]- O. This assumption is not particularly appealing, since a 3 > 0 is motivated in part by stockout costs, and presumably increases in H t will decrease stockouts and increase revenues (increase p,St). As noted above, our modeling of stockout costs is crude but given data constraints in some applications the gains from more sophisticated treatments perhaps are small. See Section 8 below for alternative treatments.
EA. Ramey and K.D. West
886
we use standard time series notation: a variable that is integrated o f order 0 - I(0), for short - is one that is covariance stationary, with a spectrum that is finite and strictly positive at all frequencies. An "integrated" variable - I(1), for short - is one whose arithmetic difference is I(0). I(1) variables are sometimes called "difference stationary", or as having unit autoregressive roots (a term that we used in Section 2).] To see the cointegration result, write the term in brackets in Equation (3.3) as xt+2, so that (3.3) is Etxt+2 = 0. If we replace expectations with realizations, we can write (3.4)
Xt+2 = ~ t + 2 , tlt+2 ~ (Xt+2 -- Etxt+2) ~ I(0).
Note that even if some or all o f the variables that comprise xt+2 are integrated, ~t+2 will still be stationary. Kashyap and Wilcox (1993) observe that xt+2 may be rewritten Xt+2 =
ao( AQt - 2bAQt+l + b2 AQt+2) - b a l ( A H t + l
+
Agt+l) + all'r-It
- a2a3ASt+l - ba2OASt+l + ba2(Ht - OSt) + Uct - bEtUct+b
(3.5)
al(1 - b ) O~a
3
ba2
Suppose U c t ~ I ( O ) but H t , S t ~ I ( 1 ) . Then A H t ~ I ( O ) and A Q t ~ I ( O ) , and Equainventories and sales are tion (3.4) (stationarity o f xt+2) requires H t - O S t - I ( O ) : cointegrated with cointegrating parameter 0. We focus on St ~ I ( 1 ) for concreteness and empirical relevance, but it is worth noting that 0 is still economically interpretable in other cases. I f St and Uct are both I(0), then O = E H t / E S t is the inventory sales ratio evaluated at steady state values o f St and Hr. (Recall that we have omitted deterministic terms for notational simplicity.) I f St and H t have deterministic drift ( E A S t ~ 0) - which is consistent with Uct either I(0) or I(1), and St either I(1) or I(0) around trend 12 _ then O = E A H t / E A S t . Suppose there are observable cost shifters. I f Uct = ~ l W t + u c t with W t ~ I ( O ) or W t ~ I ( 1 ) [see Equation (3.2)] then from similar logic Uct~[(O) ~ H t - O S t + (ba2) 1(1 - b ) ' a I W t z H t - O S t - o f f W t =- H t - H t ~ I(0): after controlling for possibly nonstationary observable cost shifters, inventories and sales are cointegrated. (Once again, OSt + a ~W t remains economically interpretable under other conditions on presence or absence o f unit roots.) We summarize the preceding two paragraphs as follows: if St HI(l), H t - H t ~ I(0), Uot ~ I(O) Uct ~ I(O)
~ =~
H t = OSt, Ht -
1-b
O = a3 - al - ba2 '
OSt + a ' W t ,
a =_
(3.6)
l-b_
--a. ba2
Observe that this result does not require parametrization of the demand curve, or specification o f market structure. Rossana (1995, 1998) assumes exogenous revenue 12 A variable xt is 1(0) around trend if Ext = m o + m lt for some m l ~ 0 and xt -Ex~ = I(0). Such variables are sometimes called trend stationary.
Ch. 13: Inventories
887
and uses the resulting decision rule to provide a complementary proof that Uct ~ I(O) [Uct ~I(0)] implies cointegration between H t and St (between H t , St and Wt). 3.4. Whose inoentories?
The preceding description o f the model suggests that manufacturers' inventories o f finished goods are a natural area for applying the model. Indeed, a large fraction of the inventory literature focuses on manufacturers' finished goods inventories, often in six two-digit industries that are known as "production to stock". 13 To some, in fact, the model is not a particularly attractive one for studying any other types of inventories [e.g., Blinder and Maccini (1991)]. In connection with our discussion of Table 4's sectoral breakdown o f US inventories, however, we noted that manufacturers' inventories of finished goods are a small and not particularly volatile component of total inventories. If, indeed, the model is applicable only to finished goods inventories, then it has limited relevance for aggregate inventory fluctuations. We conclude this section by briefly noting that this arguably constitutes an unadvisedly narrow reading of the model. First, works in progress inventories apparently function as a buffer in many industries, particularly ones that are production to order [West (1988)], and thus fit naturally into the model. More importantly, however, it is possible that an invisible hand causes a large aggregate to solve an optimization problem such as (3.1), using transactions not explicitly modeled in Equation (3.1) to do so. This point was first made by Blanchard (1983), who combined data from the production and retail sectors of the auto industry, modelling explicitly the transactions between the two sectors, and showed that the industry as a whole solved an optimization problem such as (3.1). This is an illustration of the equivalence between a social planning and a decentralized equilibrium, which is well known to occur under general circumstances. We are therefore sympathetic to the view that there has been too strong a focus on manufacturers' inventories o f finished goods. But we feel the implication may be not that the model is of limited relevance, but that it, or related models that capture similar forces, should be applied more widely.
4. Decision rule 4.1. Introduction
Section 4.2 briefly reviews alternative treatments of demand, and solves for a decision rule under a simple specification. Section 4.3 derives the process followed by the
13 "Production to stock" industries are ones that typically sell finished goods off the shelf. By contrast, "production to order" industries are ones that maintain order backlogs, often deferring final assembly until orders are in hand. See Abramowitz (1950) and Belsley (1969).
888
V.A. Ramey and K.D. West
inventory-sales relationship, and may be skipped without loss of continuity. Section 4.4 summarizes the implications of Section 4.3 for persistence in the inventory-sales relationship. We present a detailed treatment o f the inventory-sales relationship because this process has not received much direct attention in existing literature. Discussions o f procyclicality in subsequent sections will cite analytical results in existing literature. 4.2. Derioation o f decision rule
Derivation o f a decision rule requires specification o f revenue because current and expected sales and output appear in the first-order conditions. We begin by reviewing some alternatives. We then work through in detail a specification that is relatively tractable. In some applications, sales is taken as exogenous, with cost minimization (i.e., m i n E t }--~/~0 bJCt+j) the objective 14. Examples include Holt et al. (1960), Belsley (1969) and Blanchard (1983). The use o f this assumption in industry-wide data is valid only if the demand curve facing the industry is vertical. In other applications, an industry equilibrium is analyzed, and a linear demand curve is specified [e.g., Eichenbaum (1984)]. We write such a demand curve in inverse form as
Pt = - g S t + g [ f dt ~ -gSt + Udt.
(4.1)
In (4.1), Udt and Udt are stochastic. The demand curve is written in this form so that exogenous sales is a special case of Equation (4.1), implemented by letting the parameter g --+ oo and specifying ~rdt as exogenous; with g ---+ oo, St = Udt. In practice, one needs to allow for serial correlation in Udt. In principle one might want to rationalize such serial correlation with (say) costs of adjustment on the part of purchasers, or with observable shifters o f the demand curve [West (1992b)]. But since the model focuses on production, and, moreover, is typically not used to study the effects of a hypothetical intervention or change in regime, taking such serial correlation as exogenous is a useful simplification that will be maintained here. Finally, Christiano and Eichenbaum (1989) and West (1990b), building on Sargent (1979, ch. XVI) derive the linear demand curve (4.1) in general equilibrium. Both papers assume a representative consumer whose per period utility is quadratic in St and linear in leisure. The disturbance Udt is a shock to the consumer's utility. There is no capital; the only means o f storage is inventories. See the cited papers for detail.
14 TO prevent confusion, we note that the first-order condition (3.3) also results if one assumes cost minimization. So if one aims to use condition (3.3) to estimate model parameters, one can motivate the equation by reference to cost minimization without taking a stand on the how revenue is determined (apart from the caveat stated in Footnote 11).
Ch. 13: Inventories
889
Here, we do not derive Equation (4.1) in general equilibrium but take (4.1) as given. We do not attempt to trace the demand shock back to preferences or other primitive sources. We therefore caution the reader that despite the label "demand", Udt should not be thought of as literally a nominal or monetary shock, since it (like all our variables) is real. As well, one can imagine scenarios in which Udt reflects forces typically thought of as supply side. If the good in question is an intermediate one, for example, one can imagine that shocks to the technology of the industry that produces the good dominate the movement of Uat. Whatever the interpretation of Udt, we derive an industry equilibrium assuming a representative firm. Even so, to obtain a decision rule, we must be specific about market structure and the structure of the demand and cost shocks. We assume here that the market is perfectly competitive, and normalize the number of firms to one. If the firm is a monopolist, the reduced form is identical, but with a certain parameter being the slope of the marginal revenue curve rather than the slope of the demand curve. We assume that Wt, Udt and Uct follow exogenous AR processes, possibly with unit autoregressive roots. By "exogenous" we mean "predictions of Wt, Udt and uot conditional on lagged Ws, Uas and uos are identical to those conditional on lagged Ws, Uds, uos, and industry-wide H s and Ss: Wt, Uat and uot are not Granger-caused by industry-wide Ht or St". (Of course in general equilibrium, such exogeneity of Wt is doubtful.) Finally, for notational simplicity, and to make contact with the literature on the "speed of adjustment" (see the next section), we tentatively assume that a0 = 0.
(4.2)
This assumption is arguably not a good one empirically, and we will relax it below. Under the assumption of perfect competition, there are two equivalent methods for deriving the decision rules for inventories and sales. The first method, which studies the decentralized optimization problem, derives the individual firm's first-order conditions and then incorporates those into the industry equilibrium. The second method, which uses a social planning approach, derives the first-order conditions for the social planner problem and obtains decision rules for those. Both methods yield identical answers. We exposit here the decentralized method, and present in the Technical Appendix the social planner approach. With a0 = O, the first-order condition for sales St for the representative firm is Pt - Et[alQt - a2a3(Ht-i - a3St) + Uct] = O.
(4.3)
In the absence of inventories, this would simply tell our competitive firm to set marginal revenue Pt equal to marginal cost a l Q t + U c t . The additional term aaa3(Ht 1 - a3St) is the effect on inventory holding costs of an additional unit produced for sale. Upon using Pt = - g S t + Udt in Equation (4.3) and Qt =St + A H t in Equation (4.3) and the inventory first-order condition (3.3), we obtain a pair of linear stochastic
V.A. Ramey and K.D. West
890
difference equations in Ht and St. This two equation system is solved in the Technical Appendix. The resulting decision rule is Ht = YgHHt-1 + distributed lag on uct, Udt and Wt,
(4.4a)
St = ~sHt 1 + a different distributed lag on uct, Udt and Wt.
(4.4b)
In (4.4a), srH is the root to a certain quadratic equation, ]~H[ < 1. Both ~ / a n d ~s depend on b, g, al, a2 and a3. (Note two differences from the relatively well-understood case of exogenous sales. Even when as, a2 > 0, i f g < oc: (a) it is in principle possible to have :v~ ~<0, and (b) the accelerator coefficient a3 affects ~/t.) The distributed lag coefficients on Uct, Udt and Wt depend on b, g, al, a2 and a3 as well as the autoregressive parameters governing the evolution of the uct, Udt and Wt. In the empirically relevant case of z~H > 0, ~H increases with marginal production costs al and decreases with marginal inventory holding costs a2. The signs of OJvH/Oa3 and OYfH/Og a r e ambiguous. The solution when revenue is exogenous (g --+ c~) is obtained by replac~g Udt with gUdt [see Equation (4.1)] and letting g ~ c~. In this case, :Vs =0, St = Udt and the solution (4.4) may be written in the familiar form H t = ~HHt I + distributed lag on St and on measures of cost,
(4.5a)
St N exogenous autoregressive process.
(4.5b)
On the other hand, when revenue is endogenous, :rs ~ 0 and we see in Equation (4.4b) that inventories Granger-cause sales. The intuition is that forward looking firms adjust inventories in part in response to expected future conditions. Thus industry-wide stocks signal future market conditions, including sales. This signalling ability is reflected in Equation (4.4b). These same results can be obtained directly from the social planner problem that maximizes consumer surplus plus producer surplus, which is equal to the area between the inverse demand and supply curves. See the Technical Appendix. In empirical application, matching the data might require allowing shocks with rich dynamics. Such dynamics may even be required to identify all the parameters of the model. Blanchard (1983), for example, assumes that the demand shock follows an AR(4). For expositional ease, however, we assume through the remainder of this section that all exogenous variables - Udt, uct, Wt - follow first-order autoregressive processes (possibly with unit roots). Specifically, assume that Et-1 Wt = (I-)wWt 1,
Wt = CrAwWt-1 + ewt,
Et_lewt = O,
I I - ~wZl = 0 ~ Izl/> 1, Et l Uct = q~cuct-1, Et-1 Udt = ~ d U d t - 1 ,
Uct = q~cUct-1 + ect,
Udt = ~JdUdt-1 + edt,
Et-leot = 0, Et ledt = O,
[q~c[ ~< 1,
]•d[
~< 1. (4.6)
Ch. 13:
Inventories
891
(Given the growth in the number of symbols, it may help to remind the reader that Table 7 summarizes notation.) The Technical Appendix shows that the distributed lags in Equation (4.4) are all first order, and Equation (4.4) is H t = YfHHt-1 +f~/w W t + f HcUct + f HdUdt,
(4.7a)
St = ~sgt-I
(4.7b)
+ f t s w W t + f scUct + f sdUdt.
See the Technical Appendix for explicit formulas for the ')¢"s in terms of b, g, al, a2, a3, qJw, q~c and q~d. Of course, if ~ = 0 so that Uct =uct, thenfHw = f s w =0. 4.3. Persistence in the inventory-sales relationship
To analyze the second of our stylized facts (persistence in the inventory-sales relationship), we now further assume that the demand shock and the observable cost shifters follow random walks: (bd = 1, Udt = Udt 1 + edt, qDw = I , W t = Wt-1 + ewt.
(4.8)
Recall that if Uct is stationary, H t - OSt is stationary as well, where the cointegrating parameter 0 is defined in Equation (3.5). When there are no observable cost shifters (~ = 0 ~ fHw = f s w = 0), tedious manipulation o f Equation (4.7) yields H t - H t =~ H t - OSt = ~ H ( H t - l
- OSt-1) + mocuct -t- mlcUct l + modedt,
(4.9)
where moo, ml~ and m0d depend on O, f H o , f H d , f S c and f S d (see the Technical Appendix). Let "L" be the lag operator. Since ( 1 - ~ c L ) u c t = e c t , it follows from Equation (4.8) that (1 - ~,vL)(1 - (bcL)(Ht - H t ) = vt, vt = mocect + m~cect-i + mOdedt -- ~)cmOdedt-1 ~ MA(1).
(4.10)
Thus, H t - H t ~ ARMA(2, 1) with autoregressive roots Jr/4 and ~bc. (This presumes that the moving average root in vt does not cancel an autoregressive root in H t - H i, which generally will not happen.) Note that the innovation edt, rather than the shock Udt, appears in Equation (4.9) and thus in Equation (4.10). With q~d ~ 1, however, the right hand side of Equation (4.10) would include a linear combination of Udt and Udt-I that would not reduce to a linear function of edt, and ~d would also be one of the autoregressive roots of H t - H i . In this case, if ~d ~ 1, then Ht - H i would also have a moving average root that would approximately cancel the autoregressive root of ~bd. Similarly, when there are observable cost shifters (a ~ 0), it may be shown that Equations (4.6) and (4.7) imply H t - H i = H t - OSt - ¢TIWt = :rH(Ht-i - OSt-1 - a1Wt-1) + disturbance,
disturbance
= m~owewt + mocUct + mlcUct-i + mOdedt.
(4.11) Once again, persistence in H t - H 2 is induced by ;r,q and q~c.
892
V.A. Ramey and K.D. West
We close this subsection by re-introducing costs of adjusting production a0. Suppose a0 ~ 0.
(4.12)
It is well known that when revenue is exogenous (g ---+ oc), costs of adjusting production put additional persistence in inventories [Belsley (1969), Blanchard (1983)]: in this case Equation (4.5a) becomes H t = Y g H I H t I + J~H2Ht 2 q- distributed lag on S t and on measures of cost,
(4.13) with Y~H2~ 0. Unsurprisingly, inventory decisions now depend on Qt-1 =St-1 +Ht-1 H t - 2 and thus on Ht-2, even after taking into account Ht-t and the sales process. As one might expect, the presence of costs of adjusting production has a similar effect even when sales and revenue are endogenous, and on the inventory-sales relationship as well as inventories. The Technical Appendix shows that a0 ~ 0 puts an additional autoregressive root in Ht - H t , which now follows an ARMA(3, 2) process. One autoregressive root is Oc. We let Jrl and Y~2 denote the two additional (possibly complex) roots. These are functions of b, a0, al, a2, a3 and g. Intuition, which is supported by the simulation results reported below, suggests that increases in a0 increase the magnitude of these roots.
4.4. S u m m a r y
on persistence
in t h e i n v e n t o r y - s a l e s
relationship
We summarize the preceding subsection as follows: assume the shocks follow the AR(1) processes given in Equation (4.6), with the additional restriction (4.8) that the demand shock and observable cost shifters follow random walks. Then ao = 0 ~
H t - H t = H t - OSt - ct ~W t ~ ARMA(2, 1),
with AR roots : r t / a n d 0c.
(4.14)
The root ~H is a function of b, g and the ai, but not the autoregressive parameters of the shocks, and is increasing in the marginal production costs at. In addition, ao ~ 0 ~
Ht - Ht
=-- H t - OSt - a t W t ~
with AR roots ~1, ~2 and ¢c; if
0c=0,
Ht-H
ARMA(3, 2), (4.15)
t~ARMA(2,1)
with AR roots Z~l and z~2. The roots ,TgI and JL"2 are functions of b, g and the ai, but not the autoregressive parameters of the shocks; both analytical manipulations of the formulas in the
Ch. 13: Inventories
893
Technical Appendix and simulations reported in Section 6 indicate that the modulus o f the larger o f the roots increases with a0 and al 15 Thus the persistence documented in Section 2.2 above follows i f there are sharply increasing production costs (a0 and/or al are sufficiently large) and/or serially correlated cost shocks. In addition, it is important to observe that qualitatively similar reduced forms are implied b y the following two scenarios: (1) serially correlated cost shocks with no costs o f adjusting production, and (2) serially uncorrelated cost shocks and sharply increasing costs o f adjusting production. We shall return to this point below. O f course persistence m a y also follow if we put different dynamics into the shocks Wt, Uct and Udt.
5. The flexible accelerator model We now derive (4.10)-(4.11) from another optimization problem. This optimization problem is one that underlies empirical work motivated by the flexible accelerator model. In this model, pioneered by Lovell (1961), firms solve a static one period problem, balancing costs o f adjusting inventories against costs o f having inventories deviate from their ffictionless target level H i. Specifically, the firm chooses H t to minimize 0.5(Ht - H~) 2 + 0 . 5 v ( H t - Ht-l)2 + utHt.
(5.1)
In (5.1), v > 0 is the weight o f the second cost relative to the first, and ut is an exogenous unobservable disturbance 16. The first-order condition is then Ht-Ht-1
= [1/(1 + v ) ] ( H ; - H t - 1 ) -
[1/(1 + v)]ut.
(5.2)
The coefficient 1/(1 + v) is the fraction o f the gap between target and initial inventories closed within a period. I f v is big (cost o f adjusting inventories is big), the fraction o f
~5 Under the present set of assumptions, then, the parameter called "p" in Section 2.2 is max{~H, $c} if a 0 = 0, max{l~ l I, 1~2I,Oc} if a 0 ¢ 0. 16 Ht and St are sometimes measured in logs [e.g., Maccini and Rossana (1981, 1984)], and the variable ut is sometimes split into a component linearly dependent on the period t surprise in sales and a component unobservable to the economist [e.g., Lovell (1961), Blinder (1986b)]. We slur over differences between regressions in levels and logs, which in practice are small (see Footnote 8), and omit a sales surprise term in the inventory regression, which in practice has little effect on the coefficients that are central to our discussion.
V.A. Ramey and K.D. West
894
the gap expected to be closed is, on average, small. To make this equation operational, target inventories H~ must be specified. Let (5.3)
H t = OS, + a ' W t .
Here, Wt is a vector of observable cost shifters [as in Section 2.2.2 and Equation (3.2)]. Notation has been chosen because of link about to be established with 0 and a ~W t as defined earlier. Suppose S t = St-1 + edt,
W t = W t - 1 + ewt,
(5.4)
= 0. (In practice, Et-lSt is usually approximated as a linear function of a number of lags of S, the actual number dependent on the data, and similarly for Wt [e.g., Maccini and Rossana (1984)]. The single lag assumed here is again for simplicity.) Then with straightforward algebra, the first-order condition (5.2) implies
Et-1 edt = O, Et l ewt
H t - OSt - a ' W t = :rH(Ht 1 - OSt-1 - a~Wt_l) + disturbance,
:vH = [v/(1 + v)],
disturbance = [1/(1 + v)](Oed, + a'ew, -- ut),
(5.5)
which is in the same form as Equation (4.11). We have thus established that in the simple parameterization of this section, in which sales follows an exogenous random walk, high serial correlation in a stationary linear combination of inventories and sales is the same phenomenon as slow speed of adjustment of inventories towards a target level.
6. Dynamic responses To develop intuition about how the model works, and what the two stylized facts suggest about model parameters and sources of shocks, this section presents some impulse responses. Specifically, we present the industry equilibrium response of (1) H t , St and Qt, or (2) H t , St and H t - OSt, to a shock to Udt or Uct, for various parameter sets, with no observable cost shifters (a = Wt = 0). While the parameter values we use are at least broadly consistent with one or another study, we choose them not because we view one or more of them as particularly compelling, but because they are useful in expositing the model. Table 8 lists the parameter sets. It may be shown that the solution depends only on relative values o f g, ao, al and a2; multiplying these 4 parameters by any nonzero constant leaves the solution unchanged. [This is evident from the first-order conditions (3.3), (B.4) and (B.5): doubling all these parameters leaves the first-order conditions unchanged, apart from a rescaling of the shocks.] Our choice of a2 = 1 is simply a normalization. We fix g = 1 in part because some of the properties documented below can be shown either to be invariant to g [see West (1986, 1990b) on procyclicality of inventories] in part because a small amount of
Ch. 13:
895
Inventories
Table 8 Parameter sets a (1) Mnemonic
(2) g
(3) a0
A
1
0
B
1
0
(4) a1
(5) a2
(6) a3
(7) ~c
(8) ~d
1
1
0
n.a. b
0.7
1
1
1
n.a.
0.7 0.7
C
1
0
-0.1
1
0
n.a.
AI
1
0
1
1
0
n.a.
1
An
1
0
1
1
0
0.7
n.a.
D
1
3
1
1
0
n.a.
1
E
1
3
1
1
1
n.a.
1
a See Table 7 for parameter definitions. The behavior of the model depends only on the scale of the parameters g, a0, a~ and a2; doubling all these leaves behavior unchanged. The discount factor b is set to 0.99 in all experiments. b "n.a." means that the autoregressive parameter is irrelevant for the impulse responses plotted in Figures 7-13: the response is for a shock to the other variable, whose AR(1) parameter is given. e x p e r i m e n t a t i o n indicated little sensitivity to g. To p r e v e n t possible confusion, we note explicitly that the p a r a m e t e r a3 is identified in absolute terms and not just relative to other parameters. Throughout, w e set the discount factor b = 0.99, and interpret the t i m e p e r i o d as quarterly. To facilitate discussion, in the graphs we set vertical tick marks labelled " - 1 " , " 1 " , "2", and so on, but this (or any other) choice o f traits to measure the response is arbitrary. [In actual application, the units u s e d w o u l d o f course be m o n e t a r y (e.g., billions o f 1992 dollars in the impulse responses in Section 2 above)]. The p r o d u c t i o n s m o o t h i n g aspect o f the m o d e l is m o s t clearly e v i d e n t w h e n shocks are m e a n reverting. We therefore begin with three p a r a m e t e r sets illustrating the response to an innovation in a stationary A R ( 1 ) d e m a n d shock Ud~, w i t h A R parameter ~d = 0 . 7 . Since q~d = 0 . 7 is probably far e n o u g h f r o m unity to m a k e the notion o f cointegration b e t w e e n H t and St unappealing, we plot the responses o f Qt, St and H t but not those o f H t - O S t 17. Parameter set A illustrates the production s m o o t h i n g model. F i g u r e 7 presents the response to a d e m a n d shock. A s may be seen, w h e n there is a , p o s i t i v e innovation to demand, sales o f course rise. But part o f the increase in sales is m e t by drawing d o w n inventories, thereby b u f f e r i n g production f r o m the d e m a n d shock. A s sales return to
17 Naturally, even though we do not include the plots here we did examine them ourselves. As it turned out, H t - O S t showed persistence. From Equation (B.11) in the Technical Appendix, we see that H t - OSt has an autoregressive root of Od that is cancelled by a moving average root only when 0d --4 1. This autoregressive root apparently explains the persistence. In our view such persistence is not particularly interesting: in a stationary model, 0 = a3 - [al (1 - b)/ba 2 ] is not the parameter corresponding to a projection o f H t onto St, and thus H t - OS t does not correspond to the quantity displaying persistence in, for example, Table 6.
896
V.A. Ramey and K.D. West I
I
I
I
I
5 43-
"-1
2.t-
O-
~,
inventories quarter
Fig. 7. Response to a stationary demand shock; parameter set A.
the steady state, inventories are gradually built back up. It may be seen in the graph that production is smooth relative to sales. The intuition is straightforward: given increasing marginal costs (al >0), it is cheaper to produce at a steady rate than to produce sometimes at a high rate, sometimes at a low rate. So the increased demand is met partly with inventories, and production is smoothed relative to sales. (Note that this logic applies even for a competitive firm that can sell as much as it wants at the prevailing market price.) Inventory movements are countercyclical, in the sense that they covary negatively with sales. It may be shown analytically that such cotmtercyclical behavior will obtain when a l > 0, a3 = 0 and there are no cost shocks [West (1986) for a stationary model, working paper version o f West (1990b) for a model with unit roots]. One can obtain procyclical movements when costs are convex if the accelerator term is operative (a3 > 0) and is sufficiently strong to offset the production smoothing motive. In Figure 8, which shows results when a3 = 1 rather than a3 = 0, inventories initially rise along with sales when there is a positive innovation to the stationary demand shock. So production rises even more than does sales, and is more variable. All three variables then fall smoothly back towards the steady state. Some algebra may help with intuition: if ao=a] =0, and Uct=O, the firstorder condition for Equation (3.1) is simply Ht=a3EtSt+l. Thus inventories will covary positively with expected sales, and thus with sales themselves since St is positively serially correlated in equilibrium. With a0 ¢ 0, al ~ 0, inventory movements will reflect a balance of accelerator and production smoothing motives. I f the
Ch. 13." Inventories
897 I
4
I
I
I
I
A
-t-I e-
1
0 I
o
I
2
I
quarter
a
Fig. 8. Response to a stationary demand shock; parameter set B.
accelerator motive dominates, as it does in this parameter set, inventories will move procyclically IS. Another way to obtain procyclical movements in response to demand shocks, is with nonconvex production costs [Ramey (1991)]. Parameter set C captures this with a small negative value for al. [The linear quadratic problem will still be well-posed, and lead to an internal solution, as long as the nonconvexity is not too marked; in the present context, this essentially demands that a2 and g be sufficiently large relative to ]al I. See Ramey (1991).] We see in Figure 9 that a positive innovation to demand causes inventories to rise (though by a small amount - an artifact o f our choice o f parameters): with al < 0 it is cheaper to bunch rather than smooth production. Thus, firms build up inventories when sales are high. If there is a cost o f changing production (a0 ~ 0), marginal production costs are (1 +b)ao +al. Ramey (1991) has noted that al < 0 may induce a tendency to bunch production even if (1 + b)ao + a~ > 0 [see West (1990b) for a particular set o f parameters for which this happens]. We now turn to parameter sets with a unit root in the demand shock (q~d= 1). Figure 10 plots the response o f inventories, sales and the inventory-sales relationship
18 Recall that the accelerator term is motivated in part by stockout costs. Kahn (1987) rigorously shows that when nonnegativity constraints are imposed, demand uncertainty (which implies uncertainty about whether a stockout will occur) will lead to procyclical movements if demand is serially correlated.
898
V.A. Ramey and K.D. West I
[
I
I
I
6
8
~.2 10 8
E
6
4 2 0
~
2_
_'~-~_ 2 _
I
0
_"-2"~-_ _ - _ ' _
_ _-_,_
I
2
_ ~ =
-
-
I
4 quartsr
I
Fig. 9. Response to a stationary demand shock; parameter set C.
H t - O S t , with the technology parameters matching those in parameter setA. As with a stationary shock, firms draw down inventory stocks when demand increases (though the fall is slight in our figure). They will replenish stocks in response to a negative shock (not depicted). Thus inventories buffer production. With our choice of parameters, the transition to the new steady state is quite rapid 19. In parameter sets B and C, a demand shock with a unit root leads to procyclical inventory movements (not depicted): with or without a unit root in the demand shock, inventories buffer production. Figure 10 also plots the response o f the inventory sales relationship H t - OSt. To understand the pattern it exhibits, some mechanics may be helpful. Since a3 = 0, 0 < 0 and ( - 0 ) > 0 [see Equation (3.5)]. In Figure 10 we see that the response o f Ht is negative but small in absolute value, that of St positive and relatively large; in the end, the net response of (-O)St > 0 is greater than that o f Ht < 0, and Ht - OSt increases in response to a demand shock. The inventory-sales relationship has little persistence, however; it has a first-order autocorrelation coefficient o f a little under 0.3. When we computed impulse responses for parameter sets B and C with a unit root demand shock (not depicted), the sign o f the initial response of l i t - OSt happened to be negative for parameter set B, positive for parameter set C: the sign o f the initial response to a demand shock is sensitive to exact parameter values. A characteristic
19 To prevent confusion: sales and revenue are endogenous in this experiment (g<ec). Although St looks like a random walk in the figure, in fact ASt does have a little bit of serial correlation, and is Granger-caused by inventories.
Ch. 13. Inventories
899 I
I
I
I
I
5
4
sales
3 e-
2
1
0
] inventory-sales relationship / J_¢/
inventories
quarter Fig. 10. Response to a unit root demand shock; parameter set A ~.
of all three parameter sets, however, was rapid mean reversion in H t - OSt. The autoregressive root x~/ [see Equation (4.9)] was 0.270 (parameter set A), 0.269 (B) and -0.148 (C). The negative sign of xH in parameter set C perhaps deserves a word of mention. Recall that al < 0 in this parameter set, and that downward sloping marginal costs induces production bunching. So bunching generates a negative autocorrelation, since high activity in one period tends to be followed by low activity in the next. In parameter set A", we continue to use the same technology parameters, but now plot responses to a cost rather than demand shock. The cost shock is stationary, with an AR parameter of q~o= 0.7. We see in Figure 11 that inventories move procyclically in response to a negative cost shock: the shock causes both inventories and sales to rise, and makes production (not depicted) more variable than sales. (Recall that we are studying industry equilibrium, and sales of course change as costs change.) The intuition once again is straightforward: a firm with a convex cost function will use periods of low cost to produce a lot and to build up inventory stocks (as in the figure), and use periods of high cost (not depicted) to produce little and instead sell out of inventory stocks that have already been built up. In this case, inventories serve to buffer production from cost shocks. (Reminder: the phrase "production smoothing" is conventionally used only to describe smoothing from demand shocks but not, as in the present paragraph, smoothing from cost shocks.) Inventory movements are procyclical. It may be shown analytically that such procyclical behavior will obtain when al > 0,
900
V.A. Ramey and K.D. West I
I
I
I
!
6
8
4 sales
3
=~1 r-
2
I
0
1
2
I
4 quarter
I
Fig. 1i. Response to stationary cost shock; parameter set A". a3 = 0 and there are no demand shocks [see the working paper version o f West (1990b)]. We see that there is now persistence in H t - OSt 2o. We showed above that when a0 = 0 , persistence in H t - OSt results even in the absence o f cost shocks i f production costs a l are sufficiently large relative to inventory costs a2. W h e n sales are exogenous (g ~ oe), it is straightforward to establish analytically that persistence also increases as ao increases relative to al and a2. We use the final two parameter sets to document via simulation that large values o f ao also cause persistence when sales are endogenous. Parameter set D varies from A ~ only by introducing a0 = 3 instead o f a0 = 0. Figure 12 plots responses o f H i , S t and H t - OSt to a positive innovation in a unit root demand disturbance. From the perspective o f buffering, there are no new results: sales increase and inventories are drawn down to buffer production. But now there is persistence in the inventory-sales relationship H t - OSt, which has an autocorrelation a little above 0.7. The intuition is that i f costs o f adjusting production are large, and i f there is a (say) jump in demand, firms only very gradually increase production to build the stock up. Finally, parameter set E varies from D by allowing the accelerator motive, setting a3 = 1 (as in parameter set B). In Figure 13 we see that inventories now move procyclically in response to demand shocks, and that there continues to be persistence in the inventory-sales relationship.
20 Of course, for the computed response of H t - OSt to give us insight into the empirical behavior of H t - OSt, there must be unit roots or near unit roots in H t and St, and hence this experiment and parameter set cannot provide the whole explanation for the two stylized facts.
Ch. 13:
901
Inventories I 5
I
I
I
I
-
43-
B .H t--
2~.-
~--i
n_7_nt_°_r_Y- sa~e_s_5 e1.ati° nshi P
O-
....
inventories I
I
0
I
2
4
quarter Fig. 12. Response to a unit root demand shock; parameter set D.
I
I
I
I
5 4
/ ~
inventories
3 2 i -I
0
/ -2
-3
X
\//
/
inventory-sales relationehlp
I
I
0
2
[
4
I
6
quarter Fig. 13. Response to a unit root demand shock; parameter set E.
Table 9 s u m m a r i z e s the discussion in this section. Evidently, we m u s t consider e m p i r i c a l e v i d e n c e on: the accelerator motive, the relative values o f a0, al and a2, and cost shocks.
902
V.A. Ramey and K.D. West
Table 9 Possible explanations of stylized facts a Inventories procyclically
Persistence in inventory sales relationship b
no
yes
yes yes
i"10
yes
yes
Inove
In response to demand shocks:
(1) Marginal production costs rise very rapidly relative to marginal inventory holding costs (a2 small relative to al and/or ao) (2) Declining marginal production costs ° (al < 0) (3) Strong accelerator motive (aza3 large relative to a 0 and a a )
no
In response to cost shocks;
(4) Increasing marginal production costs
a The parameters are defined in Table 7. b The implications for persistence in the inventory-sales relationship apply if there is a unit root in the demand shock [explanations (1) (3)] and persistence in the cost shock [explanation (4)]. c The reference to "declining marginal production costs" abstracts from costs of changing production (from ao). With a0 * 0, marginal production cost is a0(1 + b) + a I. But even if a0(1 + b) + at > 0, inventory movements may be procyclical if a 1 < 0.
7. Empirical evidence 7.1. I n t r o d u c t i o n
The analytical results in West (1986, 1990b) and Section 4 and the simulations in Section 6 suggest at least two different ways o f rationalizing the procyclicality o f inventory movements and the persistence o f the inventory-sales relationship. One is a demand-driven model with rapidly increasing marginal production costs (marginal production costs a0 and/or al are large relative to marginal inventory holding costs a2), together with a strong accelerator motive (a2a3 large relative to a0 and a 0 . The second is a cost-driven model, with increasing marginal production costs; such a model may or may not have a role for the accelerator. For simplicity we somewhat loosely refer to these as our d e m a n d - d r i v e n and our c o s t - d r i v e n explanations. We do so with some reservations: please recall that our demand shock Udt may in some data basically reflect supply side forces. These two do not exhaust the possibilities, and many economists (including us) would expect both cost and demand shocks to be important over samples o f reasonable length. Our own work, for example, has emphasized the possibility o f declining marginal production costs [Ramey (1991)]. In combination with highly persistent cost shocks, both procyclicality o f inventories and persistence o f the inventory-sales relationship m a y result. A n d West (1990b) finds both stylized facts explicable with a model with strong costs o f adjusting production and a substantial role for both cost and demand shocks, but with no accelerator.
Ch. 13: Inventories
903
But our demand-driven and cost-driven explanations have the virtue of simplicity, and both have support from a number of papers: as summarized in this section and the next, most aggregate studies, and the limited microeconomic evidence available, do not point to declining marginal cost, and do find a role for the accelerator. In citing such support we do not cast a wide net but instead selectively cite representative papers. In addition, after some introductory remarks on papers using the flexible accelerator model (Section 7.2), we focus on papers that explicitly use the linear quadratic model, for ease of exposition. Section 7.2 reviews parameter estimates from the linear quadratic literature, Section 7.3 discusses sources of shocks, and Section 7.4 provides an interpretation. We remind the reader that the behavior of inventories depends only on the relative values of g, a0, al and a2. All statements referencing "large" values of one of these parameters should be understood to mean "large relative to another parameter or linear combination of parameters". The normalization involved will be clear from the context.
7.2. Magnitude of cost parameters Our discussion will focus on estimates of the linear quadratic model. We begin, however, with a brief discussion of results from less structured studies, including those using the flexible accelerator. We record two results. The first is that in flexible accelerator studies, actual or expected sales is generally found to be an important determinant of inventory movements, with a positive relationship between the two series. See, for example, Maccini and Rossana (1981, 1984) or Blinder (1986b). In terms of the model in Section 5, a positive relationship may be interpreted as 0 > 0, where 0 is the coefficient on sales in the expression for target inventories [see Equation (5.3)]. As well, in direct estimation of a cointegrating parameter, Granger and Lee (1989) do obtain 0 > 0 in all 27 of their US two-digit manufacturing and trade series. To interpret this with the linear quadratic model, recall that under certain conditions, the decision rule from the flexible accelerator model (5.1) can be mapped into that of the linear quadratic model (3.1). Under those conditions, 0 = a3 - [al (1 - b)/(ba2)] [see Equations (3.5), (4.11) and (5.5)]. Thus a3 > 0 is necessary for the cointegrating parameter 0 to be positive, as noted by Kashyap and Wilcox (1993). [This holds even when Uct is present (although cointegration requires Uct-I(0)).] Thus here and in linear quadratic studies (see below) there is support for a nontrivial role for the accelerator motive - a result that may be unsurprising or reassuring to some, but in any event is not particularly helpful in discriminating between our two candidate explanations. The second result from the flexible accelerator literature concerns the structure of production costs. As discussed in Section 2, this literature has found large autoregressive roots in H t - H i, which implies slow adjustment of Ht towards H i. In quarterly data, a typical estimate of the root is around 0.8-0.9, implying that about
904
V.A. Ramey and K.D. West
10-20% o f the gap between actual and target inventories is closed in a quarter. Ever since Carlson and Wehrs (1974) and Feldstein and Auerbach (1976), many observers have found such estimated speeds puzzling and perhaps not well-rationalized by the flexible accelerator model. One reason is that even the largest quarterly movements in inventories amount to only a few days production. This suggests to Feldstein and Auerbaeh (1976, p. 376) and others that costs o f adjusting inventories [v, in the notation o f Equation (5.1)] cannot be very large 21 . To interpret this second result with the linear quadratic model, recall that we set a0-= 0 when we established a mapping from the flexible accelerator to the linear quadratic model (3.1). With a0-= 0, an arbitrarily slow speed o f adjustment results when al is arbitrarily large. It is not clear to us how large a value o f al is implausibly large. But we take from the flexible accelerator literature the message that many find this simplest version o f the model unappealing [see Blinder and Maccini (1991) for a recent statement]. Accordingly we consider the other sources o f persistence isolated above: costs of adjustment (discussed in this subsection), and serial correlated cost variables (discussed in the next subsection). To focus the discussion o f costs of adjustment, we highlight estimates from some recent linear quadratic studies using two-digit manufacturing data from the USA. Different studies present estimates o f a0, al and a2 relative to different parameters or linear combinations o f parameters. To display results from various studies in consistent form, we restate published estimates of ao, a~ and a2 relative to a c o m m o n linear combination o f the published estimates of those parameters. This linear combination is c ~ (1 + 4 b + b 2 ) a o + ( 1 + b ) a l +ba2,
(7.:)
with b ~ 0.99. Here, "c" is the second derivative o f the objective function (3.1) with respect to Ht; the Legendre-Clebsch condition states that e > 0 is a necessary condition for an optimal solution. [See Stengel (1986, p. 213) or Kollintzas (1989, p. 11).] Note that the estimates we discuss will therefore not be comparable to those used in the simulations in the previous section and in Table 8, and often are not as easily interpreted as those expressed relative to a single parameter. We nonetheless use this normalization since studies sometimes report negative estimates o f a0, al or a2, which can make interpretation o f estimates relative to one o f those parameters problematic. Most authors examine more than one specification. Table 10 presents results for a specification that seemed to be preferred by the author(s). For the preferred specification, columns 2-6 present the median point estimate o f ao/c, a l/c, [(1 + b)ao + a l ]/c
21 The logic apparently is that it should be easy to make inventory movements rapid if firms are beginning from a starting point in which current movements are small relative to production. But small inventory movements seem to be exactly what one would associate with slow adjustment speeds, if costs of adjustment determine both the size of movements and the adjustment speeds; if, instead, the slow adjustment speeds were accompanied by large movements in inventories, there would be a puzzling contrast between regression results and basic data characteristics.
Ch. 13:
905
Inventories
Table 10 Median point estimates of model parameters a-d
(1) Reference e
(2) ao/C
(3) al/c
(4) [(1 +b)a 0 +al]/ c
a2/c
(5)
(6) a3
(7) Number of industries
5
Models with serially correlated cost variables:
(1) Durlauf and Maccini (1995)
0.
0.43
0.43
0.15
0.55
(2) Eichenbaum (1989)
0.
0.21
0.21
0.58
1.15
7
-0.16
0.83
0.64
-0.09
1.14
6
0.15
-0.63
-0.43
1.69
0.40
6
(3) Kollintzas (1995) (4) Ramey (1991)
Models without serially correlated cost variables:
(5) Fuhrer, Moore and Schuh (1995)
0.13
0.12
0.38
0.00
0.67
1
(6) West (1986)
0.05
0.34
0.44
0.01
1.12
10
a In the column definitions, e -- (1 + 4b + b2) a 0 + (1 + b) a 1 + ba2, b =- 0.995. Note that the magnitudes in columns 2-4 are therefore not comparable to those in columns 4-6 in Table 8. b Different papers expressed point estimates relative to different linear combinations of parameters. For each paper, the reported point estimates were restated relative to c. The Legendre-Clebsch condition states that c > 0 is a necessary condition for an interior solution of the optimization problem. The table reports the median of the restated estimates. When a0 = 0 (lines 1 and 2), or when there is only one industry (line 5), the column 4 entry for marginal production cost is by construction equal to: (1 +b) times column 2, plus column 3. c All the studies used two-digit manufacturing data from the USA. The exact data, sample period, specification and estimation technique vary from paper to paper. d Most papers present more than one set &results. We chose the specification that seemed to be favored by the author(s). e Sources by reference: (1) Table 7 (p. 85), entries labelled "Table 3"; (2) Table 2 (p. 861); (3) Tables 1 6 (pp. 77-80), columns labelled "random walk"; (4) Table 1 (p. 323), excluding autos; (5) Table 4 (p. 128), entry labelled "FIML-endogenous sales"; (6) Table 4 (p. 391). ( = m a r g i n a l production cost, taking into account costs o f adjusting production), a 2 / c a n d a3. The m e d i a n is c o m p u t e d across the datasets considered b y the author; the n u m b e r o f datasets is given i n c o l u m n 7. A skim o f the table suggests a broad consensus on a3 ( c o l u m n 6). A s well, there is relatively little d i s a g r e e m e n t on the sign o f the slope o f marginal production costs ( c o l u m n 4); with the exception o f R a m e y (1991), the studies find a n upward slope to m a r g i n a l production cost. There is, however, some variation in the extent to which the cost o f adjustment a0 contributes to this upward slope. Consistent with the d e m a n d driven explanation, F u h r e r et al. ( t 9 9 5 ) (line 5) and to a lesser extent West (1986) (line 6) find that a0 contributes to the upward slope. Some studies with other datasets have found an even stronger role for the cost o f adjustment a0, with a0 positive and significant but with estimates o f the production cost al negative [consistent with R a m e y (1991)], or e c o n o m i c a l l y or statistically
906
V.A. Ramey and K.D. West
indistinguishable from zero. For example, Kashyap and Wilcox's (1993) study of the automobile industry in the 1920s and 1930s yielded median estimates of parameters as follows: ao/c al/c [(1 + b)ao + al]/c a2/c a3 (7.2) 0.20 -0.11 0.29 0.03 0.72" Similar results are reported for the modern automobile industry by Blanchard (1983) and Ramey (1991), and for US aggregate inventories by West (1990b). On the other hand, we see in lines 1 and 2 that the preferred specifications in the Eichenbaum (1989) and Durlauf and Maccini (1995) set the cost of adjustment to zero. In these two papers, the estimates of al tended to be positive but perhaps not so large as to imply a speed of adjustment that Feldstein and Auerbach (1976) would find implausibly slow. In part these papers set a0 to zero - because in a setup similar to that of Kollintzas (1995) in line 3, negative and insignificant point estimates of a0 tended to result. Rounding out the cost-driven story requires finding substantial persistence from stochastic variation in costs. This is discussed in the next subsection. 7.3. Shocks There is much circumstantial evidence that serially correlated cost shifters have important effects on inventory behavior. In particular, the data often seem happy with specifications in which the unobservable disturbance uct is highly autocorrelated [e.g., Eichenbaum (1989), West (1990b), Ramey (1991)]. One's confidence that this unobservable disturbance really reflects stochastic variation in production costs would be increased if inventories could be shown to respond aggressively to observable measures of costs. Unfortunately, this appears not to be so. In practice, factor prices and interest rates usually are insignificant (in both economic and statistical terms), and sometimes have effects opposite of the theoretical predictions. For statistical significance, Table 11 shows a selection of results using cost variables, from studies of two-digit manufacturing in the USA, and now including flexible accelerator as well as linear quadratic studies. It may be seen in columns 1-4 that a finding of a statistically significant effect of observable measures of costs is rare: only 2 entries are "y"s, indicating that in only two of the 21 studies did significance at the 5% level characterize at least three-fourths of the coefficients estimated in a given study. 11 entries are "n"s, indicating that in these 11 studies fewer than one-fourth of the coefficients were significant. On the other hand, in column 5 it may be seen that for the unobservable disturbance, three of the 6 entries are "y"s, and that two of these "y"s are for studies that also included some observable measures of costs (lines 6 and 8); none of the 6 entries are "n"s. 7.4. Interpretation We showed in Section 4 that the demand-driven and cost-driven explanations put two large autoregressive roots in the inventory sales relationship H t - O S t ; in fact,
Ch. 13: Inventories
907 Table 11 Statistical significance of cost variables ~c
Reference d
Wage
Materials prices
(1) Blinder (1986b)
?
?
(2) Durlauf and Maccini (1995)
?
n
Energy prices
Interest rate
Unobservable shock
n
?
n
(3) Eichenbaum (1989)
y
(4) Kollintzas (1995)
?
(5) Maccini and Rossana (1981)
y
?
n
?
(6) Maccini and Rossana (1984)
n
y
n
y
(7) Miron and Zeldes (1988)
n
?
n
(8) Ramey (1991)
n
?
n
(9) Rossana (1990)
?
?
n y ?
a This table is an updated version of a table in West (1995). b All the studies used two-digit manufacturing data from the USA. The exact data, sample period, specification and estimation technique vary from paper to paper. c A "y" entry indicates that the coefficient on the variable in a given column was significantly different from zero at the 5% level in at least three-fourths of the datasets in a given study, a "n" that it was significant in at most one-fourth of the datasets, a "?" that it was significant in more than one-fourth but fewer than three-fourths of the datasets. A blank indicates that the variable was not examined. d Sources by reference: (1) Table 1 (pp. 360 61); (2) Table 3, inst. set. 4; (3) Table 2 (p. 861); (4) Tables 1-6 (pp. 77-80), columns labelled "HP filter" and "quadratic trend"; (5) Table 1 (p. 20); (6) Table 3 (p. 231) and discussion on p. 227; (7) Table I1 (p. 892); (8) Table 1 (p. 323); (9) Tables 3 and 4 (pp. 26-27), with the cost of capital variable "ce" and "cp" interpreted as interest rate variables.
u n d e r certain conditions, b o t h i m p l y A R M A ( 2 , 1) p r o c e s s e s o f l i t - OSt. Specifically, this happens w h e n q~c= 0 in the d e m a n d - d r i v e n explanation [see E q u a t i o n s (4.14) and (4.15)1. That the similar A R M A structures might allow both m o d e l s to fit a g i v e n b o d y o f data is illustrated by Kollintzas (1995). Kollintzas' results in line 3 o f Table 10 were for a specification w i t h a r a n d o m w a l k (q~c= 1) cost shock (i.e., Kollintzas differenced the first-order condition b e f o r e estimating). A m o n g other specifications, Kollintzas allowed for an i.i.d, u n o b s e r v a b l e cost shock. In the specification with i.i.d, cost shocks, the m e d i a n estimates o f the p a r a m e t e r s were:
ao/c
al/c
0.03
0.42
[(1 + b)ao + al]/C 0.47
a2/c
a3
0.01
2.51'
(7.3)
W h i l e the estimate o f m a r g i n a l production costs was n o t wildly different (0.47 with i.i.d, shocks vs. 0.64 w i t h r a n d o m walk shocks [line 3, c o l u m n 4 o f Table 10)], the
908
V.A. Ramey and K.D. West
median estimate of a0 was higher. In fact, the estimate o f a0 was higher in 5 o f the 6 datasets 22. An interpretation is that a model that fits his data would imply two autoregressive roots. When serial correlation in the cost shock was suppressed, the positive values for a0 rationalized a second autoregressive root; when serial correlation in the cost shock was imposed, large (or even positive) values o f a0 would imply an autoregressive structure too elaborate for the data, and accordingly the regression yielded diminished values o f a0. Discriminating between the two explanations thus means distinguishing between costs o f adjustment [when a0 ¢ 0 and the serial correlation of the cost shock is zero (~bc= 0)] and exogenous serial correlation (when a0 = 0 and q~c is near one). In principle this may be done, using either cross-equation restrictions, or additional variables such those in the Wt vector. But in both inventory and non-inventory contexts this has proved difficult [e.g., Blinder (1986b), McManus et al. (1994), Surekha and Ghali (1997)]. And in any case, our discussion so far perhaps has understated the extent o f conflict across empirical results. There is a range of estimates of most parameters (including some wrong-signed or otherwise implausible ones), and we have pushed papers into one o f just two camps in the interest o f summarizing a complex set o f results: while in principle it may be possible to pin down important macroeconomic parameters and sources o f shocks by simply estimating linear inventory models with aggregate data, this tantalizing idea has not proved true in practice so far. The conflict across papers, or the range o f estimates, may be no worse than in empirical work in other areas. For example, those familiar with the real business cycle literature will probably not be surprised that it is difficult to find observable counterparts to unobservable cost shocks. And Lovell (1994) shows that the estimated speed o f adjustment o f Ht towards H~ is in fact no slower than those o f some other variables. As well, part o f the conflict across papers no doubt results from econometric problems related to sample size or estimation technique [West and Wilcox (1994, 1996), Fuhrer et al. (1995)]. Finally, it may be that careful analysis would reveal that seemingly disparate conclusions in fact result mainly from the use o f different sample periods, datasets, and observable cost shiflers ("Wt", in the notation o f the previous sections). But pointing out (perhaps unfairly!) that other literatures have similar problems will not advance our knowledge about inventories. Nor, most likely, will sharp estimates be produced by even the most refined econometric technique, at least when applied to familiar data. We therefore suggest some alternative approaches.
22 Such statements potentially are sensitive to how the parameters are expressed (relative to "c", as in Table 10, or some other linear combination of parameters). But in this case the statement applies not only with respect to the normalization we have used, but also with respect to the normalization used by Kollintzas, which was relative to a0(1 + b)+ a l.
Ch. 13: Inventories
909
8. Directions for future research
8.1. Introduction
In this section we offer what we believe to be fruitful directions for future research. Sections 8.2 and 8.3 describe alternative modelling strategies. Some of our suggestions are based on alternatives to the basic linear quadratic production smoothing model; others extend the basic model. All build on the insights delivered by the basic model: that procyclical movements result when inventories facilitate sales (a force captured in the basic model with the accelerator term), and that the shape of production costs influences both the character of cyclical movements and the persistence of the inventory-sales relationship. In addition, all seem intuitively capable of helping explain either or both of our stylized facts (procyclicality of inventories, persistence o f the inventory-sales relationship), although, of course, research to date involving these suggestions has its share of blemishes (e.g., wrong-signed parameter estimates). Finally, Section 8.4 describes how the use of different data may help understand inventory behavior. 8.2. Inventories in production and revenue functions
The potential importance of the accelerator term (a3) in explaining both the business cycle and long-run behavior of inventories suggests that the relationship between inventories and sales deserves more study. Consider first Holt et al.'s (1960) original motivation for this formulation as az(Ht-a3St+l) 2. As discussed on pp. 56-57 of their book, their initial model of optimal inventory holdings used lot-size formulas, where the optimal batch size, the number of batches and optimal inventory levels all increase with the square root o f the sales rate. They used two approximations to capture the costs and benefits associated with inventory holdings. First, they approximated the square-root relationship with a linear relationship between inventories and sales (e.g., H 7 =a3St+l). Second, they approximated all costs and benefits associated with inventories with a quadratic in which costs rise with the square of the deviation of inventories from the optimal level. This generates the accelerator term a 2 ( H t - H t ) 2. While this tractable formulation provides a plausible mechanism for procyclical inventory movements, there are two potential problems with it. First, the approximations may be inadequate. As we will discuss below, the approximations used imply that the cost of a marginal reduction in inventories is linear in the stock of inventories, whereas at least one paper found significant convexities. Second, inventories may directly affect revenue in a way that is not well captured by including the accelerator term in the cost function. One alternative strand of the literature has modelled inventories as factors of production, or considered interrelationships between inventories and other factors of production. Christiano (1988), Ramey (1989), Galeotti et al. (1997) and Humphreys et al. (1997) are examples. Ramey (1989) argues that since inventories at all stages
910
V.A. Ramey and K.D. West
of production facilitate production and shipments, they should be considered factors of production. She includes three stages of inventories in the production function, and estimates factor demand relationships. This approach obviously has the potential to make inventories move procyclically, since factor usage fluctuates with output. The results from the linear quadratic model suggest if costs of adjustment are allowed, persistence would result as well. A second line of research has considered the revenue role of inventories. Kahn (1987, 1992) develops a theory of a stockout avoidance motive for holding inventories and tests some of its implications using automobile industry data. Kahn argues that demand uncertainty and a nonnegativity constraint on inventories can explain several important patterns in the data. Bils and Kahn (1996) extend this line of research by assuming that the demand function is a (nonlinear) function of the stock of goods available for sale. They apply the model to two-digit manufacturing data with mixed success. Rotemberg and Saloner (1989) offer another potential role for inventories in revenue, arguing that inventories may be accumulated to deter deviations from an implicitly collusive arrangement between firms. The nature of the equilibrium implies that inventories will be high when demand is high. They show empirically that the correlation between inventories and sales is higher in concentrated industries, as predicted by their model. A third line of research studies uses more general functional forms for the relationship between inventories and sales. [The work by Kahn (1992) and Bils and Kahn (1996) also fits into this category.] Pindyck (1994) studies the convenience yield of inventories for three commodities. Augmenting the usual production, sales and inventory data with futures prices, he provides evidence that the marginal convenience yield is very convex, increasing sharply as inventories approach zero. This indicates that the approximation embodied in the basic Holt et al. (1960) model may miss some important aspects of inventory behavior.
8.3. Models with fixed costs
We next consider arguments and evidence that a key shortcoming of the linear quadratic model is that it fails to account for fixed costs facing firms. Blinder (1981), Caplin (1985), Mosser (1988), Blinder and Maccini (1991), and Fisher and Hornstein (1996) all argue that fixed costs of ordering may be very important for understanding the behavior of retail and wholesale inventories as well as manufacturers' materials and supplies. In some environments the aggregation argument presented in Section 3.4 will not apply, and research to date has shown that under certain conditions such fixed costs may lead to (S, s) type of decision rules. In their review article, Blinder and Maccini (1991) recommend that future inventory research concentrate on the (S, s) model. This will require resolution of difficult problems of aggregation, perhaps partly through the use of simulations [Lovell (1996)]. While the results look suggestive at the level of a single-product firm, the implications for a multi-product firm, let alone for an
Ch. 13: Inventories
911
industry or economy, have been harder to obtain because of difficulties of aggregating (S, s) rules. The studies by Bresnahan and Ramey (1994) and Hall (1996) show that fixed costs are an important determinant of production costs in the automobile industry. Bresnahan and Ramey follow some fifty assembly plants on a weekly basis from 1972 to 1983, and uncover important lumpiness in the margins for varying production. Hall studies fourteen assembly plants from 1990 to 1994. Both studies isolate two important methods for varying production, which appear to involve some sort of nonconvex costs. First, they find that complete shut-down of a plant for a week at a time is an important method for temporarily decreasing output rates. Second, the adding and dropping of extra shifts (each of which doubles or halves production) are an important source of output variability, and appear to involve fixed costs and lumpiness of production levels. Thus, costs in the automobile industry deviate from the linear quadratic production smoothing model in two important ways. First, there appear to be fixed costs of adjusting production, not convex costs as postulated in the production smoothing model. Second, the lumpiness of the margins, accompanied by the fixed costs, leads to a nonconvex cost function. It is important to point out that the nonconvexity is due not to declining marginal costs [as Ramey (1991) originally posited], but rather to the existence of large fixed costs at key points in the cost curve. Thus, both the (S, s) literature and the limited amount of factory evidence available suggests that fixed costs may be very important. Furthermore, the types of fixed costs highlighted can potentially explain both the procyclicality of inventories and the persistence of the inventory-sales relationship. For example, the lumpiness of the shifts margin in the automobile industry can explain why an increase in sales might lead to a more than proportional increase in production. Also, the importance o f fixed adjustment costs can explain why significant deviations in the inventory-sales relationship are allowed to occur before production responds. It is not yet clear, however, how general are the results from the automobile industry. And more generally it is not well understood how and whether fixed costs at the plant or firm level translate into industry- or economy-wide behavior. Thus, the role of these types of fixed costs in explain aggregate inventory fluctuations remains an important topic for future study. 8.4. The value o f more data
Finally, we discuss how the addition of more data may help narrow the estimates obtained from the linear quadratic model, as well as shed light on the unobserved cost shocks. We will argue that there are several available sources of data that have the potential to clear up ambiguities. One possible explanation for the range of estimates obtained from the production smoothing model is the data are not sufficient for distinguishing the relative values of the parameters. One way to glean more information from macroeconomic data is to use information contained in prices, something done in a handful of papers
912
V.A. Ramey and K.D. West
including Eichenbanm (1984), Blanchard and Melino (1986) and Bils and Kahn (1996). Pindyck's (1994) results using futures prices provides additional evidence of the information contained in prices. A second possible use of new data is to measure the stochastic variation in cost. As Table 11 indicates, a number of authors have experimented with several observable cost shifters, but generally do not find effects. Another possible source of cost shocks that has been studied in a few papers is credit conditions. We remarked in Section 2.2 that Kashyap et al. (1994) and Carpenter et al. (1994, 1998) still find persistence in the inventory-sales relationship after including measures of credit conditions. But they also regularly find that credit conditions affect inventory holding behavior of small firms, across various specifications. If these credit conditions are serially correlated (which they are likely to be), and if small firms are important enough to substantially affect industry- and economy-wide aggregates, credit conditions may ultimately help explain our two stylized facts. Finally, we advocate more plant and firm-level studies, although gathering such data requires substantial work. Schuh (1996), for example, uses panel data from the M3LRD to calibrate biases from aggregation. And consider Holt et al.'s (1960) study o f six firms ranging from a paint producer to an ice cream maker and Kashyap and Wilcox (1993) and Bresnahan and Ramey's (1994) studies of the automobile industry. They use not only firm-level data on production, inventories and sales, but also company reports and industry press, which provide valuable insights into the cost structure facing firms. For example, Bresnahan and Ramey (1994) were able to categorize the cause of every plant shutdown using information from Automobile News, which chronicled drops in demand and cost shocks such as strikes and model year change-overs.
9. Conclusions
We conclude by briefly reiterating several points we have made in this chapter. We began by asserting that inventories are a useful resource in business cycle research. The theoretical dependence of the comovements o f sales, production, and inventories on important parameters such as the slope of marginal costs, and on the nature of the underlying shocks, indicates that inventory models can in principle be used to identify these important macroeconomic features. The two stylized facts we highlight - the procyclicality of inventories and the persistence of the inventory-sales relationship are intimately linked to other aspects of business cycle fluctuations. Thus, inventory movements have valuable business cycle information. To consider explanations for the two facts, we presented a linear quadratic model. We showed that the model can rationalize the two facts in a number of ways, but focused on two stylized explanations have the virtue of relative simplicity and support from a number of papers. Both assume that there are persistent shocks to demand for the good in question, and that marginal production cost slopes up. The first explanation assumes as well that there are highly persistent shocks to the cost of production. The second
Ch. 13: Inventories
913
assumes that there are strong costs of adjusting production and a strong accelerator motive. Our review o f the empirical evidence, however, indicates that the range of estimates of key parameters and of the relative importance of cost versus demand shocks is too wide to allow us to endorse one of the two or some third explanation. But while the literature has not reached a consensus, it has identified mechanisms and forces that can explain basic characteristics of inventory behavior. We believe that several research strategies, and use of different data, promise to continue to improve our understanding of inventory movements and therefore of business cycle fluctuations.
Appendix A. Data Appendix Data sources for annual G7 data: all data on inventory changes were obtained from International Financial Statistics, mostly from the 1996 CD-ROM. From the CD-ROM, we obtained nominal and real GDP and the nominal change in aggregate inventories. The GDP deflator was used to convert the inventory change from nominal to real. For the Canada, France, the UK and the USA, 1955 data were available to compute AQ and AS in 1956. For all other countries an observation was lost in computing the initial AQ and AS. Additional sources were used for West Germany and Italy. West Germany: (a) 1957-1978: the IFS data used in West (1990a), rebenchmarked to a 1990 from a 1980 base, and output measured with GNP instead of GDR (b) 19791994: in both the CD-ROM and in recent hardcopy versions of IFS, the figures on the annual change looked suspicious: they were uniformly positive and large relative to 1957-1958, bore no obvious connection to the figures on the levels reported in the Statisches Bundesamt publication cited below, and in recent years bore no obvious connection to the average of the reported quarterly figures. So for 1979-1990, we used the annual change reported in the hardcopy IFS, obtaining a given year's data from the April issue three years later (e.g., the 1990 figure came from the April 1993 issue of IFS). (For 1980 we used the May 1983 issue, because the April 1983 issue was missing.) For 1991-1994, we used the average of the quarterly figures from the April 1995 hardcopy version of IFS. Italy: 1993 and 1994 real GDP came from OECD Economic Surveys, Italy, 1996, rebenchmarked to a 1990 from a 1985 base. We checked the US data against the Department of Commerce's 1992 chain-weighted NIPA data, and while there were notable differences, overall the two perhaps were tolerably close: the correlation between inventory investment as constructed here and the Department of Commerce measure was 0.96. Data sources for non-US data on inventory levels: Canada: private communication from Statistics Canada gave a nominal 1995:IV inventory figure for all nonfmancial industries of 140.8 billion Canadian dollars, which we deflated with the GDP deflator. West Germany: Statisches Bundesamt, Volkswirtschafiliche Gesamtrechnungen,
914
V.A. Ramey and K.D. West
Table 3.2.9. Agriculture (line 2) was subtracted from total (line 1), and the result was deflated by the GDP deflator. Japan: Economic Planning Agency, Annual Report on National Accounts, 1997, table on "Closing Stocks". The nominal figure for total stocks was deflated by the GDP deflator. United Kingdom: Office for National Statistics, United Kingdom National Accounts: The Blue Book, 1996, Table 15.1. Agriculture (series DHIE) and government (AAAD) were subtracted from total (DHHY), and the result was deflated by the GDP deflator. Data sources for sectoral distribution of US inventories: broad sectoral categories were obtained from Citibase, and manufacturing inventories by stage of processing were obtained from the BEA. The stage of processing inventories were converted from monthly to quarterly data by sampling the last month of the quarter.
Appendix B. Technical Appendix This appendix discusses the following: (1) solution of the model 23; (2) Computation of E(Q 2 - S 2) in Table 4; (3) Estimation of 0 in Table 5; (4) the social planning approach to derivation of the first-order conditions. B. 1. Solution o f the model
We assume throughout that al, a2, g > 0 and a0, a3/> 0. See Ramey (1991) for solutions when al < 0. We begin by working through in detail the solution discussed in Section 4, when a0 = 0 and the forcing variables follow first-order autoregressions. For simplicity, for the most part we set ~ ---- 0 as well. Thus Uot =Uct [see Equation (3.2)], Et-luct =(&u~t-l and Et 1Udt = (9,JUdt-l. To insure a unique stable solution, we assume that either (B.la) or (B.lb) holds: g > a2a3(1 - a3), a2a3(1 - a3) > g >
(B.la) 2(1 + b 1)ala2(a3 - 0.5)(a3 - b(1 + b) -1) a2 +2al(1 + b 1)
(B.lb)
Note that the right-hand inequality in (B. l b) follows if a3 falls outside (b(1 + b) -I , 0.5), a narrow range when b ~ 1. There will also be a stable solution when a2a3(1 - a 3 ) = g . But to allow us to divide by g - a2a3(1 - a 3 ) at certain stages in the derivation, we rule this out for conciseness.
23 We thank StanislavAnatolyevfor assistancein the preparationof this part of the TechnicalAppendix.
915
Ch. 13.. Inventories
When a0 = 0, differentiating the objective function (3.1) with respect to St gives Pt - Et[al Qt - a2a3(Ht-1 - a3St) + Uct] = 0.
Use P t = - g S t + U d t , (B.2) becomes
(B.2)
and our tentative assumption that Uct=Uot.
Qt=St+AHt,
- a l H t - (al + a2a~ + g ) S t + (al + a2a3)Ht-1 - Uct + Udt = 0.
(B.3)
al St = - ~ H t
(B.4)
al + a2a3 . + ~ - - H t
1
l-~Uct+
1 ~Udt'
d ---- (al + a2a~ + g).
Use (B.4) and (B.4) led one period to substitute out for St and St+l in H t ' s first-order condition (3.3) (with a0 =- 0). After some rearrangement, the result may be written 0 = bEtHt+i - (1 + b + m ) H t + H t 1 + gtlcuct + grid
Udt
bEtHt+À - ~lHt + H t - I + gHcUct + gHdUdt, m=
a2[b(al + g) + ala3(1 - b)] a l [ g +a2a3(a3 - 1)]
'
(B.5)
g + a2a 2 - bOc[g + a2a3(a3 - 1)] gHc =-
grid --
al [g + a2a3(a3 - 1)]
al - bq~d(al + a2a3) a l [ g + a2a3(a3 - 1)]'
It can be shown that inequality (B. 1) guarantees that there is exactly one root less than one to the polynomial bx 2 - t/x + 1 = 0.
(B.6)
Call this root ~H, where /2]
if
~/>0,
0 . 5 b - 1 [ ~ l + ( t 1 2 - 4 b ) 1/2]
if
~/<0.
=0.5b-l[r]-(r]2-4b) ~z4
(B.7)
Using techniques from Hansen and Sargent (1980) it follows that the solution to problem (B.5) is H t = ~ H H t - 1 + f HcUct + f Hd Udt, f Hc =-- [YgH/(1 --b~14Oc)]gHc,
f Hd =~ [~H/(1 --bYgHOd)]gHd.
(B.8)
Upon substituting Equation (B.8) into Equation (B.4) and rearranging, we obtain St = ~ s H t - I + f scUct + f sdUdt, fSc =
1 + alfHc 2 ' al + a2a 3 + g
~S =~
al(1 - ~ H ) + a2a3 al + a2a 2 + g
(B.9)
1 -- a l f H d f S d =-
al + a2a~ + g
•
916
V.A. Ramey and K.D. West
Let L be the lag operator, "adj" the adjoint of a matrix. From Equations (B.7) and (B.8), a representation for the bivariate (Ht, H t - O S t f =-- Y t process is Yt = AYt-I +BUt,
Jr. A ----
¢C14 - 0¢Cs
0
fH BI ~
0 '
Yt = (I-AL)-IBUt
-
file--
c0 f Sc
fHd f Hd -- O f sd
adj ( I - A L ) ~ . ~
(B.lO)
t~t-/t
1I - A L l Yt : a d j ( I - A L ) B U t .
This m a y be used to solve for the univariate process for H t - OSt, which is (1 - ¢CHL)(Ht - OSt) = ( f Hc - O f so) uct + O ( : V H f Sc -- Y f S f Hc)Uct-1
03.11)
+ ( f H d -- O f s d ) Udt + O(¢gHfSd -- ~ S f H o ) U d t - 1 .
Suppose that Udt follows a random walk, so that Cd = 1 and ( f H d - O f s d ) U d t = ( f H d -- O f s d ) ( U d t 1 + edt). Upon using the definition of 0 in Equation (3.5), and in light o f the quadratic equation used to obtain ZrH, tedious manipulations reveal that ( f Hd -- O f sd) + O ( : r H f Sd -- : r S f HO) = 0. It follows that Od = 1
:=k
(1 -- : r H L ) ( H t - OSt) = ( f n c - O f sc) uct + O(¢~mf Sc -- ¢ ~ S f Hc) Uc,-I + ( f e o -- O f sd) edt =- mocUct + mlcUct-i + mOdedt
(1 -
:rilL)(1 - (bcL)(Ht - OSt) = v¢ - moce~t + m1~e~t-1 + m0dedt - OcmOdedt 1 ~ MA(1).
(B.12) Thus, when Od = 1, H¢ - OSt N ARMA(2, 1) with autoregressive roots eVIl and 0c. Now suppose that a ¢ 0, so that Uct = "aIWt + Uct, with E t a Wt = q)wWt 1. Algebra similar to that used above may be used to conclude that the first-order condition (B.5) and the decision rules (B.8) and (B.9) become /
0 = E t ( b H t + l - r]Ht + H t - t + g , w W t +gHeUct + gmdUdt), H t = Z~HHt 1 + f ~ w W t
+ f HcUct + f HdUdt,
S t = YgsHt-1 + f s w W t + f scuct + f Sd Udt, gHw ~
(B.13)
( g + a 2 a 2 ) I -- b [ g + a2a3(a3 - 1)]q~/w ~, al [ g + aza3(a3 - 1)]
f H w ----:rH(I -- bZCHq)/w)-1 gHw,
f S w --
"a + a l f i-lw 2
al + a2a 3 + g
Ch. 13:
Inventories
917
with the other parameters unchanged. It follows that when ~bd= 1 (1 - ~ , L ) ( H t - OSt) = ( f g w -- O f s w f W t + O(~HfSw -- Y ~ S f H w f W t 1 + (fI4c -- Ofsc)Uct + O ( ~ g f S c -- YgSfHc)Uct-I + (fHd -- Ofsd)edt.
(1 - :vHL)(Ht - OSt - a' Wt) = (fh'w - Ofsw - a ) ' W t + [O(gHfsw - arsfHw) + YgHa]'Wt-1 + ( f i l e -- Ofsc) Uct + O(~14fSc -- ~ S f H c ) Uct t + OCHd -- Ofsd) __
edt
!
= mow Wt + [ O ( ~ H f s w - arsf14w) + :rHa]'Wt_l + mo~uct + ml~Uct i + modedt. (B.14) When q~w = I and Wt = Wt 1 +ewt, it may be shown that mow + O ( : r H f S w - - : r S f , w)+ ZCHa = 0. Then (B.14) implies (1
-
x14L)(Ht-OSt
--
a ' W t ) - --
(B.15)
m o' w e w t + mocUct + m l c U c t - 1 + mOdedt.
Now allow ao ~ 0, as well as arbitrary autoregressive processes for Wt, Uct, and Udt. When a0 ~ 0, the first-order condition for St (B.2) becomes -gSt
+ Udt -
Et[(aoAQt - baoAQt+l ) +
alQt
- a2a3(Ht-l
- a 3 S t ) + U c t ] = O,
(B.16) where Pt = - g S t + Udt has been used to substitute out for Pt. The solution is most concisely derived if one uses St = Q t - A t t t to remove the St from the first-order condition (equivalently, if one makes Qt and H t rather than St and H t the choice variables). After so doing, Equations (B.16) and (3.3) may be written Et[bAtlXt+l + A o X t +A1Xt-1 +BoUt +BlUr+l] = O, X t = (Ht, Q t f .
(B.17)
The (2×1) vector Ut is (Udt, U c t f . The matrices A1, Ao and Bo and B1 are (2 × 2), with
Ao =A 1 =--
(1 + b)g + a2a~ + ba2(1 - a3) 2 - ( g + a2a 2)
I
-[g-a2a3(1-a3)] [ g - a2a3(1 -
0
~' 0
Vt~CVt.
--a0
Bo =
B1 =
1
--
'
I°:l 0
" (B.18) Suppose that Vt ~ (uet, Udt, W~) f N AR(p) (possibly with unit autoregressive roots), Et 1Vt =q)lVt l + ' " . + ~ p V t ~ . (There may be many zeros in the q)i if there is lots more dynamics in say Wt than in either uct or Ud¢). Note for the future that Ut = 10 01
a3)]
- ( g + a2a23) g + a~ + a2 a2 + (1 + b)ao '
(B.19)
918
V.A. Ramey and K.D. West
Guess a solution of the form Xt
=
(B.20)
R Y t - l -]- GoVt + ' . . + Gp 1Vt~+l =- RXt_~ + G(L)Vt.
In Equation (B.20), the Gi are 2 × (2 + dimension o f Wt). In Equation (A.17), use (B.20) led once to substitute out for EtXt+l, and then substitute out for X t using (B.20). For condition (B.17) to hold, we must have (bAil R2 + AoR + A l ) X t - l = 0,
(B.21a)
bA'1 { R G ( L ) V t + [EtG(L)Vt+I]} + AoG(L)Vt + B o C V t + B~ CEt Vt+l = O.
(B.Zlb) Equation (B.21a) requires bA'l R2 +AoR+A1 =0. Given model parameters, and thus knowledge o f A1 and A0, this equation may be used to solve for a stable matrix R. (The matrix equation will have multiple solutions, just as does the scalar quadratic Equation (B.5). Restrictions similar to those in (B. 1) will insure that there is a unique stable solution.) It may help to note that the solution matches the earlier one if we reimpose the assumption that there are no costs o f adjusting production. With a0 = 0, the second column o f A1 is zero, from which it follows that the second column o f R is zero. Further, R(1, 1) ~ rl 1 = JrH, r21 = JrH + ;rs - 1 for JrH and ;rs defined in Equations (B.7) and (B.9). Whether or not a0 = 0, once R is recovered from Equation (B.21 a), Equation (B.2 lb) may then be used to solve for the Gi. For example, suppose that Wt and the shocks are first-order autoregressive, so that p = l : q~l is block diagonal with ~bc in its (1, 1) element, Cd in its (2, 2) element and q~w in the block in its lower right hand corner. Then Equation (B.21b) implies bA'I (RGo + Goq~l) + AoGo + BoC + B1C ~ I = 0,
(B.22)
which can be used to solve linearly for Go in terms o f the model parameters and q~l. Return to the solution (B.20). Let R = [r/j]. Transform from a solution in (Ht, Qt)' to one in (Ht, St)' =- Zt, using Qt = St + A H t . The result is Zt = 111Zt-I + H2Zt-2 + Fo Vt + • " • + Fp 1Vt p+l,
//1 =
rll +r12 1 +r22+r21 - ( r l l +r12)
Fi = MGi,
M =
lO 1 1
r12 r22-r12
112 = '
-r12 -(r22-r12 )
0 0 '
"
(B.23) Thus St 2 does not appear in the reduced form, and the first column o f / / 2 is the negative o f the second column o f H~. To repeat an earlier point: if ao = 0, then rl2=r22 =0, rl~ = ~ H , and 1 + r 2 ~ - r l l = ~ s . Finally, suppose we use Equation (B.23) to derive the autoregressive process for (Ht, H t - OSt)', and then solve for the univariate process for H t - OSt, using the method
Ch. 13.
919
Inventories
that led to Equation (B.11). When a0 s 0 , the relevant determinant [the analogue of ] I - A L I in Equation (B.10)] is a second-order polynomial in the lag operator. Specifically, for/'/1 defined in Equation (B.23), let II1 = [~/j]. Then this second order lag polynomial is 1 - (Jr11 + 3g12)L+ (3"gl13"g22-}-,7112 -- gg213"gi2)L 2.
(B.24)
The roots to this polynomial are called ~l and :r2. Equation (B.22) may be used to show that the moving average component of H t - OSt is first order when q)c = 0 and Od = 1.
B.2. Computation of E(Q 2 - S 2) The computation of E ( Q 2 - S 2) follows West (1988). In the stationary case, and ignoring deterministic terms, E(Q 2 - S ] ) v a r ( A H t ) = 2EStAHt = 2cov(S, AHt) = 2 cov[(ASt + ASt-1 + ASt 2 - t - ' ' '), z~LIt] = 2[cov(ASt, AHt) + cov(ASt_l, AHt) + - . . ] . It may be shown that even in the case S~I(1): (1) under regularity conditions, Y'~-o cov(ASt4, AHt) is finite and may be consistently estimated; (2) the implications of the model for the sign of E(Q 2 - S 2) are the same as those for var(Q)-var(S) when St (and Ht) are I(0) [see the working paper version of West (1990b)]. Let "~j be an estimate of cov(ASt_j, AHt), which we computed as ~j = T -t ~ t r=j +1 Ast-jAht, where As and Ah are residuals produced by demeaning or detrending. When St ~I(1), consistent nonparametric estimation of ~ 0 cov(ASt_j, AHt) involves computing }-~ii' ~j and letting m ~ oo as T ~ ec. In the computations in Table 4, we let the number of lags m be 5 for the full samples, 4 for post-1973 samples.
B.3. Estimation of~O The cointegrating parameters were estimated using dynamic OLS, as advocated by Stock and Watson (1993). We regressed inventories on a constant and sales (with no deterministic trend), and included current plus up to two years (or eight quarters) of leads and lags of the change in sales. We successively eliminated variables with t-statistics less than 1.65 in absolute value. Heteroskedasticity and autocorrelation consistent standard errors were computed using a Bartlett kernel with two years (or eight quarters) of lags.
B. 4. Social planning derivation of the model's first-order conditions The area under the inverse demand curve is just the integral of the inverse demand (4.1), and is given by
fo
CX~(udt gXt) dXt -
-
UdtS, - 0.5gS~.
(B.25)
The area under the supply curve is equal to the cost function presented as part of Equation (3.1). Thus, the competitive equilibrium solution is equivalent to the solution
920
V..A. Ramey and K.D. West
to the following social planner problem that maximizes the difference between these two functions: MaxH,s V = E, ~_~ b j IUdt+jSt+j - 0.5gSet+j j-O O.5aoAQ2±/ - O.5al Q~+j - O.5a2 (Ht +j-i - a3St +j)2 - U c t +jQt +j] 03.26) subject to the inventory identity that Qt +j = St +j + A H t +j. The first-order c o n d i t i o n for inventories is identical to the one o b t a i n e d from the firm-level problem. The first-order c o n d i t i o n for sales is identical to the one obtained w h e n the industry d e m a n d curve is substituted into the firm-level first-order c o n d i t i o n for sales.
References Abramowitz, M. (1950), Inventories and Business Cycles (National Bureau of Economic Research, New York). Allen, D.S. (1995), "Changes in inventory management and the business cycle", Federal Reserve Bank of St. Louis Review 77:17-26. Beaulieu, J.J., and J.A. Miron (1992), "A cross country comparison of seasonal cycles and business cycles", The Economic Journal 102:772-788. Belsley, D. (1969), Industry Production Behavior: The Order-Stock Distinction (North-Holland, Amsterdam). Bils, M., and J.A. Kalm (1996), "What inventory behavior tells us about business cycles", manuscript (University of Rochester). Blanchard, O.J. (1983), "The production and inventory behavior of the American automobile industry", Journal of Political Economy 91:365-400. Blanchard, O.J., and A. Melino (1986), "The cyclical behavior of prices and quantifies: the case of the automobile market", Journal of Monetary Economics 17:379-408. Blinder, A.S. (1981), "Retail inventory behavior and business fluctuations", Brookings Papers on Economic Activity 1981(2):443-505. Blinder, A.S. (1986a), "Can the production smoothing model of inventory behavior be saved?", Quarterly Journal of Economics 101:431-453. Blinder, A.S. (1986b), "More on the speed of adjustment in inventory models", Journal of Money, Credit and Banking 18:355-365. Blinder, A.S, and L.J. Maccini (1991), "Taking stock: a critical assessment of recent research on inventories", Journal of Economic Perspectives 5:73-96. Bresnahan, T.E, and V.A. Ramey (1994), "Output fluctuations at the plant level", Quarterly Journal of Economics 109:593-624. Caplin, A.S. (1985), "The variability of aggregate demand with (S, s) inventory policies", Eeonometrica 53:1395-1409. Carlson, J.A., and W. Wehrs (1974), "Aggregate inventory behavior", in: G. Horwich and E Samuelson, eds., Trade, Stability and Growth: Essays in Honor of Lloyd A. Metzler (Academic Press, New York). Carpenter, R.E., and D. Levy (1998), "Seasonal cycles, business cycles and the comovement of inventory", Journal of Money, Credit and Banking 30:331 346.
Ch. 13: lnoentories
921
Carpenter, R.E., S.M. Fazzari and B.C. Petersen (1994), "Inventory investment, internal-finance fluctuations, and the business cycle", Brookings Papers on Economic Activity 1994(2):75-138. Carpenter, R.E., S.M. Fazzari and B.C. Petersen (1998), "Financing constraints and inventory investment: a comparative study using high frequency data", Review of Economics and Statistics 80:513-519. Cecchetti, S.G., A.K. Kashyap and D.W Wilcox (1997), "Interactions between the seasonal and business cycles in production and inventories", American Economic Review 87:884-892. Childs, G.D. (1967), Inventories and Unfilled Orders (North-Holland, Amsterdam). Christiano, L.J. (1988), "Why does inventory investment fluctuate so much?", Journal of Monetary Economics 21:247-280. Christiano, L.J., and M.S. Eichenbaum (1989), "Temporal aggregation and the stock adjustment model of inventories", in: T. Kollintzas, ed., The Rational Expectations Inventory Model (Springer-Verlag, New York) 70-109. Durlauf, S.N., and L.J. Maccini (1995), "Measuring noise in inventory models", Journal of Monetary Economics 36:65-90. Eichenbaum, M. (1984), "Rational expectations and the smoothing properties of finished goods", Journal of Monetary Economics 14:71-96. Eichenbaum, M. (1989), "Some empirical evidence on the production level and production cost smoothing models of inventory investment", American Economic Review 79:853-864. Fair, R.C. (1989), "The production smoothing model is alive and well", Journal of Monetary Economics 24:353070. Feldstein, M.S., and A.J. Auerbach (1976), "Inventory behavior in durable goods manufacturing: the target adjustment model", Brookings Papers on Economic Activity 1976(2):351-396. Fisher, J.D.M., and A. Hornstein (1996), "(S, s) inventory policies in general equilibrium", working paper WP-96-24 (Federal Reserve Bank of Chicago). Fuhrer, J.C., G.R. Moore and S. Schuh (1995), "Estimating the linear-quadratic inventory model: maximum likelihood versus generalized method of moments", Journal of Monetary Economics 35: 115-157. Fukuda, S.-i., and H. Ternyama (1988), "Some international evidence on inventory fluctuations", Economics Letters 28:225-230. Galeotti, M., L. Guiso, B. Sack and E Schiantarelli (1997), "hwentories, production smoothing and the shape of the cost function", manuscript (Universit~t degli Studi di Bergamo). Granger, C.WJ., and T.H. Lee (1989), "Investigation of production, sales and inventory relationships using multicointegration and non-symmetric error correction models", Journal of Applied Econometrics 4:S145-S159. Hall, G. (1996), "Non-convex costs and capital utilization: a study of production and inventories at automobile assembly plants", manuscript (Federal Reserve Bank of Chicago). Haltiwanger, J.C., and L.J. Maccini (1989), "Inventories, orders, temporary and permanent layoffs: an econometric analysis", Carnegie-Rochester Series on Public Policy 30:301-366. Hansen, L.P, and T.J. Sargent (1980), "Formulating and estimating dynamic linear rational expectations models", Journal of Economic Dynamics and Control 2:7-46. Hansen, L.E, and K.J. Singleton (1982), "Generalized instrumental variables estimation of nonlinear rational expectations models", Econometrica 50:1269-1286. Hester, D.A. (1994), "Changing relations between inventories and bank loans", in: R. Fiorito, ed., Inventory Cycles and Monetary Policy (Springer-Verlag, Berlin) 125-147. Holt, C.C., E Modigliani, J.E Muth and H.A. Simon (1960), Planning Production, Inventories and Work Force, (Prentice Hall, Englewood Cliffs, NJ). Humphreys, B.R., L.J. Maccim and S. Schuh (1997), "Input and output inventories", manuscript (Federal Reserve Bank of Boston). Jorda, O. (1997), "Random-time aggregation in partial adjustment models", manuscript (University of California at Davis).
922
V.A. Ramey and K.D. West
Kahn, J.A. (1987), "Inventories and the volatility of production", American Economic Review 77: 667-680. Kahn, J.A. (1992), "Why is production more volatile than sales? Theory and evidence on the stockoutavoidance motive for inventory holding", Quarterly Journal of Economics CVII:481-510. Kashyap, A.K., and D.W Wilcox (1993), "Production and inventory control at the General Motors Corporation during the 1920s and 1930s", American Economic Review 83:383-401. Kashyap, A.K., O.A. Lamont and J.C. Stein (1994), "Credit conditions and the cyclical behavior of inventories", Quarterly Journal of Economics CIX:565-592. Kollintzas, T. (1989), "The linear rational expectations equilibrium inventory model: an introduction", in: T. Kollintzas, ed., The Rational Expectations Equilibrium Inventory Model (Springer-Verlag, New York) 1-32. Kollintzas, T. (1995), "A generalized variance bounds test with an application to the Holt et al. inventory model", Journal of Economic Dynamics and Control 19:59-89. Krane, S.D. (1994), "The distinction between inventory holding and stockout costs: implications for target inventories, asymmetric adjustment, and the effect of aggregation on production smoothing", International Economic Review 35:117-136. Krane, S.D., and S.N. Braun (1991), "Production smoothing evidence from physical product data", Journal of Political Economy 99:558-581. Lai, K.S. (1991), "Aggregation and testing of the production smoothing hypothesis", International Economic Review 32:391-403. Lovell, M.C. (1961), "Manufacturers' inventories, sales expectations, and the acceleration principle", Econometrica 29:293-314. Lovell, M.C. (1993), "Simulating the inventory cycle", Journal of Economic Behavior and Organization 21:147-179. Lovell, M.C. (1994), "Researching inventories: why haven't we learned more?", International Journal of Production Economics 35:33-41. Lovell, M.C. (1996), "Macroeconomic implications of S, s versus accelerator finished goods inventory strategies", International Journal of Production Economics 45:55-64. Maccini, L.J., and R.J. Rossana (1981), "Investment in finished goods inventories: an analysis of adjustment speeds", American Economic Review 71:17-22. Maccini, L.J., and RJ. Rossana (1984), "Joint production, quasi-fixed factors of production, and investment in finished goods inventories", Journal of Money, Credit and Banking 16:218-236. McManus, D.A., J.C. Nankervis and N.E. Savin (1994), "Multiple optima and asymptotic approximations in the partial adjustment model", Journal of Econometrics 62:91-128. Metzler, L.A. (1941), "The nature and stability of inventory cycles", The Review of Economics and Statistics XXIII:113-129. Miron, J.A., and S.P. Zeldes (1988), "Seasonality, cost shocks and the production smoothing model of inventories", Econometrica 56:877-908. Mosser, P.C. (1988), "Empirical tests of the (S, s) model for merchant wholesalers", in: A. Chikan and M. Lovell, eds., The Economics of Inventory Management (Elsevier, Amsterdam) 261-284. Pindyck, R.S. (1994), "Inventories and the short-rtm dynamics of commodity prices", The RAND Journal of Economics 25:141-159. Ramey, V.A. (1989), "Inventories as factors of production and economic fluctuations", American Economic Review 79:338-354. Ramey, V.A. (1991), "Nonconvex costs and the behavior of inventories", Journal of Political Economy 99:306-334. Rossana, R.J. (1990), "Interrelated demands for buffer stocks and productive inputs: estimation for two digit manufacturing industries", Review of Economics and Statistics 72:19-29. Rossana, R.J. (1993), "The long-run implications of the production smoothing model of inventories: an empirical test", Journal of Applied Econometrics 8:295-306.
Ch. 13:
Itwentories
923
Rossana, R.J. (1995), "Technology shocks and cointegration in quadratic models of the firm", International Economic Review 36:5-17. Rossana, R.J. (1998), "Structural instability and the production smoothing model of inventories", Journal of Business and Economic Statistics 16:206-215. Rotemberg, J.J., and G. Saloner (1989), "The cyclical behavior of strategic inventories", Quarterly Journal of Economics 104:73-98. Sargent, T.J. (1979), Macroeconomic Theory (Academic Press, New York). Schuh, S. (1996), "Evidence on the link between firm-level and aggregate inventory behavior", Finance and Economics Discussion Paper No. 1996-46 (Federal Reserve Board of Governors). Stengel, R.E (1986), Stochastic Optimal Control: Theory and Applications (Wiley, New York). Stock, J.H., and M.W. Watson (1993), "A simple estimator of cointegrating vectors in higher order integrated systems", Econometrica 61:783-820. Surekha, K., and M. Ghali (1997), "The speed of adjustment and production smoothing", manuscript (Western Washington University). West, K.D. (1983), "Inventory models and backlog costs", Ph.D. Thesis (Massachusetts Institute of Technology). West, K.D. (1986), "A variance bounds test of the linear quadratic inventory model", Journal of Political Economy 94:374401. West, K.D. (1988), "Order backlogs and production smoothing", in: A. Chikan and M. Lovell, eds., The Economics of Inventory Management (Elsevier, Amsterdam)305-318. West, K.D. (1990a), "Evidence from seven countries on whether inventories smooth aggregate out-put", Engineering Costs and Production Economics 19:85-90. West, K.D. (1990b), "The sources of fluctuations in aggregate inventories and GNP", Quarterly Journal of Economics CV:939 972. West, K.D. (1992a), "A comparison of the behavior of US and Japanese inventories", International Journal of Production Economics 26:115-222. West, K.D. (1992b), "Sources of cycles in Japan, 1975 1987", Journal of the Japanese and International Economies 6:71-98. West, K.D. (1995), "Inventory models", in: M. Pesaran and M. Wickens, eds., Handbook of Applied Econometrics, vol. I, Macroeconometrics (Basil Blackwell, Oxford) 188-220. West, K.D., and D.W. Wilcox (1994), "Some evidence on the finite sample behavior of an instrumental variables estimator of the linear quadratic inventory model", in: R. Fiorito, ed., Inventory Cycles and Monetary Policy, (Springer-Verlag, Berlin) 253-82. West, K.D., and D.W Wilcox (1996), "A comparison of alternative instrumental variables estimators of a dynamic linear model", Journal of Business and Economic Statistics 14:281-293. Wilkinson, M. (1989), "Aggregate inventory behavior in large European economies", European Economic Review 33:181-194.
Chapter 14
RESUSCITATING REAL BUSINESS CYCLES * ROBERT G. KING University of Virginia and NBER SERGIO T. REBELO Northwestern University and NBER
Contents Abstract Keywords 1. Introduction 2. Stylized facts o f a g g r e g a t e activity 2.1. Measuring business cycles with the HP filter 2.2. Some stylized facts of US business cycles 2.3. Some stylized facts of economic growth 2.4. Implications of stylized facts 3. The basic neoclassical m o d e l 3.1. The structure 3.2. Steady-state growth and transforming the economy 3.3. Optimal capital accumulation 3.4. The nature of the steady state 3.5. Transitional dynamics 3.6. The (Un)importance of capital formation 3.7. Constructing dynamic stochastic models 4. The Real Business C y c l e s h o c k 4.1. The driving process 4.2. Calibrating and solving the model 4.3. Business cycle moments 4.3.1. Simulations of US business cycles 4.4. The importance of capital accumulation 4.5. Early successes and criticisms
928 928 929 931 932 934 941 941 942 942 944 946 947 948 950 951 952 952 953 956 958 960 960
* We benefited from the comments of the editors as well as from those of Rui Albuquerque, Robert Barro, Marianne Baxter, Satyajit Chatterjee, Aubhik Khan, Daniele Coen Pirani, Henry Siu, Julia Thomas, and Michelle Zaharchuk. Dorsey Farr provided detailed comments and excellent research assistance. Support from the National Science Foundation is gratefully acknowledged. Handbook of Macroeconomics, Volume 1, Edited by J.B. Taylor and M. Woodford © 1999 Elsevier Science B.V. All rights reserved 927
928 5. The central role o f productivity shocks 5.1. Productivity shocks must be large and persistent 5.2. The influence of productivity persistence 5.3. Why not other shocks? 6. Extensions o f the basic neoclassical model 6.1. The supply of labor 6.1.1. Estimated and assumed labor supply elasticities 6.1.2. Implications of varying the aggregate labor supply elasticity 6.1.3. Modeling the extensive margin 6.2. Capacity utilization 7. Remeasuring productivity shocks 8. Business cycles in a high substitution economy 8.1. Specification and calibration 8.2. Simulating the high substitution economy 8.3. How does the high substitution economy work? 8.4. What are the properties of the shocks? 8.5. How sensitive are the results? 9. Conclusions Appendix A. Dynamic theory A.1. Assumptions on preferences and technology A.2. The dynamic social planning problem A.3. A dynamic competitive equilibrium interpretation A.4. The welfare theorems References
R.G. King and S.T. Rebelo
963 963 969 973 974 974 975 975 976 980 982 984 984 986 986 988 990 993 995 995 997 999 1001 1002
Abstract The Real Business Cycle (RBC) research program has grown spectacularly over the last decade, as its concepts and methods have diffused into mainstream macroeconomics. Yet, there is increasing skepticism that technology shocks are a major source o f business fluctuations. This chapter exposits the basic RBC model and shows that it requires large technology shocks to produce realistic business cycles. While Solow residuals are sufficiently volatile, these imply frequent technological regress. Productivity studies permitting unobserved factor variation find much smaller technology shocks, suggesting the imminent demise o f real business cycles. However, we show that greater factor variation also dramatically amplifies shocks: a RBC model with varying capital utilization yields realistic business cycles from small, nounegative changes in technology.
Keywords macroeconomics, business cycles JEL class~cation: El0, E32
Ch. 14:
Resuscitating Real Business Cycles
929
1. Introduction
Business cycle research studies the causes and consequences of the recurrent expansions and contractions in aggregate economic activity that occur in most industrialized countries. Over the last century, exploration of real business cycles the idea that economic fluctuations are caused primarily by real factors - has itself undergone periods of intense activity and relative dormancy. In the 1920s, real theories played a leading role: economists sought to use new microeconomic tools to learn about the aggregate consequences of shifts in demand and supply of goods and productive factors. However, the Great Depression of the 1930s had a dramatic effect on business cycle research. Economists began to believe that microeconomic theory was an inadequate basis for understanding business cycles. Real factors came to be less stressed, with greater weight given to monetary conditions and the psychology of households and firms. Government management of the economy came to be seen as not only desirable but essential. The rise of Keynesian macroeconomics to a position of orthodoxy in aggregate economics meant that it took half a century for a revival of interest in equilibrium business cycle models. The breakdown in the performance of macroeconometric models in the 1970s and the associated rational expectations revolution pioneered by Lucas (1976) set the stage for a vigorous recovery, since the logic of rational expectations ultimately required general equilibrium analysis 1. Kydland and Prescott (1982) and Long and Plosser (1983) first strikingly illustrated the promise of this approach, suggesting that one could build a successful business cycle model that involved market clearing, no monetary factors and no rationale for macroeconomic management. It is now perhaps hard to recall that this idea was met with surprise and disbelief. By the end of the 1980s there was a central and controversial finding of real business cycle (RBC) research, as this line of work came to be called. Simple equilibrium models, when driven by shifts in total factor productivity measured using Solow's (1957) growth accounting approach, could generate time series with the same complex patterns of persistence, comovement and volatility as those o f actual economies. Writing a survey of RBC research at that time, it was difficult to find sufficient material so we settled for expositing the basic model and forecasting future developments 2. A decade later, our task in this chapter is substantially different: it is time to take stock of a decade of research, to assess criticisms, and to evaluate the health of the research program. The first observation is that it has been a decade of spectacular growth: so many theoretical and empirical articles use the RBC approach that a full bibliography would
Sargent (1982). 2 King,Plosserand Rebelo (1988a,b) surveyedthis area when a single conferenceprogram could include most participants in the RBC research program.
930
R.G. King and S.T. Rebelo
likely exhaust the generous page constraint on our contribution to this volume. 3 Real business cycle analysis now occupies a major position in the core curriculum of nearly every graduate program. 4 At a recent NBER conference, a prominent Cambridge economist of the New Keynesian school described the RBC approach as the new orthodoxy of macroeconomics, without raising a challenge from the audience. Continuing on the positive side of the ledger, the methods of the RBC research program are now commonly applied, being used in work in monetary economics, international economics, public finance, labor economics, asset pricing and so on. In contrast to early RBC studies, many of these model economies involve substantial market failure, so that government intervention is desirable. In others the business cycle is driven by shocks to the monetary sector or by exogenous shifts in beliefs. The dynamic stochastic general equilibrium model is firmly established as the laboratory in which modern macroeconomic analysis is conducted. At the same time, there has been increasing concern about the mechanism at the core of standard RBC models: the idea that business cycles are driven mainly by large and cyclically volatile shocks to productivity, which in turn are well represented by Solow residuals as in the provocative study of Prescott (1986). A key difficulty is that typical estimates of Solow residuals imply a probability of technical regress on the order of 40%, which seems implausible to most economists. Recent studies have corrected the Solow residual for mismeasurement of inputs - notably, unobserved effort and capacity utilization - and inappropriate assumptions about market structure. These remeasurements have produced technology shocks with more plausible properties: notably, productivity growth is much less likely to be negative. In effect, these studies have caused productivity shocks to grow smaller and less cyclically volatile by introducing elements which respond sympathetically to economic activity [see, for example, Burnside, Eichenbaum and Rebelo (1996)]. Since the standard RBC model requires large and volatile productivity shocks, this remeasurement research is typically interpreted as indicating that our chapter should be a first draft of the obituary of the RBC research program. In fact, most of our survey does read like a chronicle of the life and death of RBC models. We begin in Section 2 by discussing the measurement of the business cycle as well as reviewing facts about growth and business cycles that have motivated the construction of aggregate models. We next turn in Section 3 to the basic neoclassical model of capital accumulation, as initially developed by Solow (1956) and others for the purpose of studying economic growth but now used more widely in the study of aggregate economic activity. We then celebrate the early victories of the RBC program in Section 4 and discuss early criticisms.
3 One valuable monitor of this ever-expanding literature is provided by Christian Zimmermann's web page (http : //ideas. uqam. ca/QMRBC/index, html). 4 One manifestation of the breadth of this intellectual impact is that Hall (1999) cites Berkeley's David Romer (1996) and Harvard's John Campbell (1994) for authoritative presentations of the basic RBC model.
Ch. 14: Resuscitating Real Business Cycles
931
There has been a substantial amomlt of research on real business cycles, but we organize our discussion around three main points in the next three sections. The central role of large and persistent productivity shocks in the basic model is discussed in Section 5. Important improvements to the basic RBC framework are highlighted in Section 6. The remeasurement of productivity shocks, which has fostered concern about the health of real business cycles, is reviewed in Section 7. In Section 8 we argue that the incipient demise o f the real business cycle is hardly as likely as suggested by conventional wisdom. In fact, rather than weaken the case for a real theory of the cycle, our view is that the recent remeasurement of productivity actually strengthens it. To make this point, Section 8 describes a very simple variant of the basic RBC model, but one that is different on two key dimensions. The economy has indivisible labor, which is one of the key improvements reviewed in Section 6, and has costly variation in capital utilization, which is one of the structural features that makes the standard Solow residual depart from productivity. There is a substantial remeasurement of productivity shocks mandated by this economy: when we do the necessary correction, the standard deviation of productivity growth drops to less than one-fifth of the standard deviation of the growth rate of the Solow residual. Productivity regress occurs in less than 1% of the postwar quarterly observations, even though the measured Solow residual shrinks 37% of the time. Yet these small shocks can generate empirically reasonable business cycles because our model features substantial amplification o f productivity shocks: readily variable capital utilization and a highly elastic labor supply lead small changes in productivity to have major effects on macroeconomic activity. When we drive our model with such small measured productivity shocks, there is a remarkable coincidence between actual US business cycles and simulated time paths of output, consumption, investment, and labor input. The same structural features that lead the Solow residual to dramatically overstate productivity fluctuations also lead the economy to greatly amplify productivity shocks.
2. Stylized facts of aggregate activity In the 1930s, Burns and Mitchell began to document the existence of a remarkable set of business cycle regularities. This research program culminated in their 1946 treatise on Measuring Business Cycles. Burns and Mitchell's arcane methodology led many economists to view their findings with skepticism [see e.g. Koopmans (1947)] and their methods fell into disuse 5. But when Hodrick and Prescott (1980) employed modern time series tools to re-examine the empirical regularities of the business cycle, they
s However,there is some recent interest in these methods. Watson (1994) uses the Burns and Mitchell methodology to contrast inter-war and post-war US business cycles. Simkins (1994) and King and Plosser (1994) show that RBC models produce artificial data that the Burns and Mitchell methods would recognize as having similar characteristics to US data.
932
R. (7. King and S.T. Rebeto
found the Burns-Mitchell facts intact, lurking underneath almost half a century of accumulated dust. As stressed by Lucas (1977), the finding that "business cycles are all alike" suggested that the nature o f macroeconomic fluctuations does not hinge on institutional factors or country-specific idiosyncrasies, so that one can hope to construct a unified theory of the business cycle. 2.1. M e a s u r i n g business cycles with the H P f i l t e r
Most real quantities, such as US real national output in the top panel o f Figure 1, grow through time. Hence, the statistical measurement o f business cycles necessarily involves some way o f making the series stationary, which is most commonly done by the removal o f a secular trend. In their study o f quarterly post-war US data, Hodrick and Prescott (1980) detrended their variables using a procedure now widely known as the HP filter. In essence, this method involves defining cyclical output y~ as current output Yt less a measure o f trend output yg, with trend output being a weighted average o f past, current and future observations: J Y; = Yt - Yg = Yt - Z ajyt4. j=-j
(2.1)
Figure 1 displays how cyclical output is constructed. In the first panel, the logarithm o f current output is the more variable series and trend output is the smoother series. The HP cyclical component o f output is the dotted line in the second panel, defined from the elements o f the first panel as y~ = Yt - Y t g except that we have multiplied by 100 so that cyclical output is a percentage 6. Aggregate output displays business cycles in that there are alternating periods o f high and low output, but these episodes are of unequal duration and amplitude. To see how the cyclical output measure produced by the HP filter compares with those from other detrending methods, we can look at the second and third panels of
6 The HP filter is derived by solving the following minimization problem: min
{(Yt _yg)2 + it [(yg+, yg)_ (yg _ygl)]2}. t=l g oc
{y, },=0 For quarterly data, the standard value chosen for the smoothing parameter it is 1600. When it = oo the solution to this problem is a linear trend, while with it = 0 the trend coincides with the original series. In a finite sample context, the weights aj in Equation (2.1) depend on the length of the sample, so that the text expression is a simplification. King and Rebelo (1993) discuss additional properties of this detrending procedure, including derivation of filter weights and frequency response fimctions for the case in which the sample is infinitely large. They establish that the HP filter has strong detrending properties, in the sense that it can make stationary series up through four orders of integration.
Ch. 14: Resuscitating Real Business Cycles 8.8 -
933
Output
and
HP Trend
8.6-
8.4-
i o,
............... Output o
HP Trend
7.8-
7.6-
7.4-
f 7.2
I
I
47
I 52
I
I
I
I 57
:
:
',
: 62
1
1
:
: 67
',
:
I
: 72
:
1
l
l 77
~
l
I
~ 82
I
I
1
I 87
I
I
I
I 92
I
I
I
Date
HP and
6.
Band
Pass
(6,32)
Cyclical
Components
42-
~. -2. -4.
i.J
~'
,.~
~'~. . . . . . .
HP
-6-8 , 47
',
',
',
', 52
:
',
',
', 57
',
l
',
', 62
',
',
',
', 67
',
~
I
1 72
I
1
~
t 77
~
~
',
', 82
',
i
',
', 87
',
',
1
', 92
',
',
',
',
',
',
Date
HP
15
/ -10 ~t -15 I 47
Growth
Component
and
Linear
Trend
'~
...... Output [~ss Linear Trend ~ -- -- -- HP Trend less Linear Trend
~/ I
I
I
I 52
I
I
I
I 57
I
Residual
I
I
i 62
I
I
I
I 67
l
I
I
', 72
',
',
',
', 77
',
',
',
', 82
:
:
',
', 87
',
',
',
', 92
Date
Fig. 1. Trend and business cycle in US real output. Sample period is 1947:1-1996:4.
934
R.G. King and S.T. Rebelo
Figure 1. First, if we simply subtract a linear trend from the log o f output, the resulting business cycle component would be the solid line in the third panel o f Figure 1. This alternative measure o f cyclical output is much more persistent than the HP measure: for example, output is high relative to its linear trend during most o f the 1960s and 1970s. The dashed line in the third panel is the gap between the HP trend and a linear trend, thus indicating that the HP filter extracts much more low frequency information than a simple linear trend. It is also useful to compare the HP cyclical component with the business cycle measures resulting from the band-pass (BP) filter procedure developed by Baxter and King (1995), since such measures are presented by Stock and Watson (1999) in their extensive compilation o f business cycle facts elsewhere in this volume 7. In the second panel o f Figure 1, the HP measure o f cyclical output is accompanied by a BP measure o f cyclical output: this procedure makes the cyclical component mainly those parts o f output with periodicities between 6 and 32 quarters. For series like output, which contain relatively little high frequency variation, Figure 1 shows that there is a minor difference between these alternative cyclical measures. There has been some controversy about the suitability of the HP filter for business cycle research. Prescott (1986) notes that the HP filter resembles an approximate highpass filter designed to eliminate stochastic components with periodicities greater than thirty-two quarters. Adopting that perspective, we are simply defining the business cycle in a fairly conventional way: it is those fluctuations in economic time series that have periodicity o f eight years or less s. At the same time, the third panel o f Figure 1 reminds us that there are slow-moving stochastic components o f economic time series omitted by this definition, which may have substantial positive and normative significance.
2.2. Some stylized facts of US business cycles Making some selections from the data set that Stock and Watson (1999) investigate more extensively, we apply the HP filter to produce cyclical components for key US macroeconomic variables 9. Figures 2, 3 and 4 provide graphs of the HP business cycle components o f major US aggregates. We use the cyclical component of output as a reference variable, placing it in each panel of each figure, so as to allow the reader to
7 Since an exact bandpass filter contains an infinite number of moving average terms, a practical bandpass filter cannot be produced exactly but involves approximations. Baxter and King (1995) derive the relevant formulas, imposing the constraint that the sum of the filterweights must be zero; they also compare the BP filter to several other detrending methods including the HP filter. 8 Eightyears corresponds to the longest reference cycle that Burns and Mitchell (1946) tmcoveredusing very different methods. Stock and Watson (1999) adopt an alternative view of the interesting business cycle periodicities (six to twenty four quarters), but this is a difference of degree rather than kind. 9 This data set covers the period 1947 (first quarter) to 1996 (fourth quarter).
Ch. 14: Resuscitating Real Business Cycles
935
Nondurables
2|
i, i '
.,I
. sD
~ !X
'
t
~i~
-8, : 47
:
Consumption
and Output
¢i~" ~,
~':" in!
ii
"d(
7
v
..
ki xj .... - - -
~6
:
: : 52
:
:
: : 57
:
:
: : 62
:
:
: : 67
:
:
: : 72
:
:
: : 77
:
:
: : 82
:
:
Output Consumption (ND) : : 87
:
:
: : 92
:
:
Date
30
Durables
Consumption
and Output
20
Z
Output
....
15.L
I~
-
o[~t / .p,(~, !/\.!,k p l , l ' , # i { i "~,"J I J IJ
!,lA 1/.1 " / i . q " l'I
-5
i?
....
j~.<,h,,~,~ I" ""i
t,,?i /
'. . . . . . . . . . . . . .
47
52
57
;
62
67
/,/i'~ . . . . 7. j~ IJ
.
.
.
.
7""~
.
72
.
.
.
.
.
-
c .....
pt~on ( D )
ft,i'l.IJll~NY't\
.... i'J.\ f I t" e l
77
-
f:4't,.,.~,~
I'"
.
.
.
82
.
-;d"
\
.
.
.
.
87
"
J
.
.
92
Date
Investment
15-
and Output
105-
if'<./
~0
.
+, .
i\
zJ
<<1"!,
I
,,N~¢
I
i,,
~ ~
.... .,
+
~ -5-10
-
-154
..... ,,
,,
:
•
', : 52
:
:
', ,, : 57
:
', ,, ,, ,, ,, : 62 67
:
:
', : 72
v .--7W y ont
. . . . . . . . . . . . . . . . . . 77 82 87
92
-20 -
Government
1510-
Spending
and Output
i~
50
k,v:'li i
m-1O
,g
'71
-5-
,l
-
,jv'i ~
,~/.-..-~
""','
v
" ; ':'
,.~A/.~
I
-254 -25
Output -- -- - - Gov't Spending
!~
-15 : '
:
I
;
-vv ,.;.--,'w-v
. . . . . . .
; ; 52
:
:
', ; 57
;
;
: : 62
:
:
; ; 57
;
;
: : 72
:
:
: : 77
:
:
: : 82
:
:
: : 87
:
:
: : 92
:
:
-
Date
Fig. 2. Cyclical components of US expenditures. Sample period is 1947:1-1996:4. All variables are detrended using the Hodrick-Prescott filter.
R.G. King and S.T. Rebelo
936 6
Total Hours
and Output
4.
2.
"<
!f
-..
'!d
-; ;--~ °2',,?'.o°~
~I
-6-8,
:
:
:
47
: : 52
:
:
: : 57
:
:
: : 62
:
:
', : 67
:
',
: : 72
:
:
: : 77
:
:
: : 82
:
:
: : 87
:
:
: : 92
:
:
Date
Capital
6
:t
p
i~ ~!
'ii
~
i
!
I
"
:
.
and Output
V
!
i
i:
"
A
i t
~
i '
, :.,:
V
lJ
i
:
:
47
: ', 52
;
:
; : 57
:
:
: : 82
:
:
: : 67
I
I
I I 72
v
!, i
i/
V
I
i
i I 77
I
I
/ ............. pu,
:
~I
..........
I I 82
I
I
I I 87
i
I
I I 92
I
I
Date
Capital
10-
Utilization
and Output
5-
J',~
:'~,,~
! ~' t;i
t I
~'4
;I
t'l
~
I
"~1
-lO -15,
fl, h
i,!
:%2
it "v'~e
VI
.D
/jl
\,-/
4
W7
II
I/J
W/
-
h
f
'~ ~,, t
I ,
57
62
67
72
-" "
~V'
~ I
~,I
~l
52
m ....
'~ .t
:,
"~,..d u '~ u
"
Out ut - - -- - - Capital UtilizaSon
77
82
87
92
Date
i
!4
Productivity
I
1.',J
i
|
~
v
J. ~-
47
"~/
~/
[J
it
.o
(Solow
,t
"
residual)
'(.,'~Lt
/b/
7
?!
~
52
57
and Output
a
~,
~
62
67
72
I*:
'~/
;
.............o=°,
~"
77
82
- - - - - - Productivity
87
92
Date
Fig. 3. Cyclical component of US factors of production. Sample period is 1947:1-1996:4. All variables are detrended using the Hodrick-Prescott filter.
Ch. 14." Resuscitating Real Business Cycles
937
Hours per Worker and Output
it
o ~
~
P
~t
~.i<
~,
I
._,~,,i.~
~"
iv;
[
.,
t I ~
'~
7 i;
tY
i,
s
,
,ok.
; .,,,
~ ,,
"
"v"
,.A!,,,x.<,~
~ . ~ ^ ]
;~"
I
i/
~,
I >
t;
,1
~
\ f ........................ Output - - - - - - Hoursper Worker
\
Date
Employment and Ouput
,~',
:-
-4
V~
-6
!
.
.
v
47
i. 7 '
52
(;
iY
kV'
","
V
ij
57
62
67
72 Datll
77
o.o., Employment
----
82
87
92
Average Product and Output
, ,,
,:,
P.
h,,>, ,2,~v.,~," ~l\w.
A
/
.D ,j,,],k{"~ .,w), t~ ,.~,h:
t /
,
~
i l;~ .ACd~,..."~_,
:
i, ii
- -
h~..- .,
-
A,e,.g. P,odoot
I
I
7 -8
I
I
47
I
:
:
:
52
;
:
;
;
~
57
;
62
I
I
I
I
J
I
67
I
I
I
I
72 Date
I
I
I
77
I
I
I
I
I
82
I
87
I
I
I
I
I
92
Real Wages and Output
6•
V'UI ~"," W" ~.-2. 4-
I
i"'"v',d'".'hv '-'v"
i! t 7 / i I}
•,
t/ {/ I'
. 47 . . . . . . 52 . . . . . . 57. . . . . 62
'..~; '4,;',41 "i'/
ti
t~
6]i 7I
~/ / ) 7 V
712 . . . . 77 . . .
~
v.>.-/'- ~.~'>,",-./" /
i " ~ \,J
," .4 ......... Output -- - - - Rea Wages
812111817
I
I
I 912111
Date
Fig. 4. Cyclical component of US labor market measures. Sample period is 1947:1-1996:4. All variables are detrended using the Hodrick-Prescott filter.
R.G. King and S.T. Rebelo
938 Table 1 Business cycle statistics for the US Economy Standard deviation
Relative standard deviation
First-order autocorrelation
Contemporaneous correlation with output
Y
1.81
1.00
0.84
1.00
C
1.35
0.74
0.80
0.88
I
5.30
2.93
0.87
0.80
N
1.79
0.99
0.88
0.88
Y/N
1.02
0.56
0.74
0.55
w
0.68
0.38
0.66
0.12
r
0.30
0.16
0.60
-0.35
A
0.98
0.54
0.74
0.78
a All variables are in logarithms (with the exception of the real interest rate) and have been detrended with the HP filter. Data sources are described in Stock and Watson (1999), who created the real rate using VAR inflation expectations. Our notation in this table corresponds to that in the text, so that Y is per capita output, C is per capita consumption, I is per capita investment, N is per capita hours, w is the real wage (compensation per hour), r is the real interest rate, and A is total factor productivity.
easily gauge the relative volatility o f the series i n question and its c o m o v e m e n t with output. S u m m a r y statistics for selected series are provided in Table 1 10 Volatility: Economists have long b e e n interested in understanding the e c o n o m i c m e c h a n i s m s that underlie the different volatilities o f key m a c r o e c o n o m i c aggregates. The facts are as follows, working sequentially w i t h i n each figure and using the notation panel 2-1 to denote panel 1 o f Figure 2 and so forth: • C o n s u m p t i o n o f non-durables is less volatile t h a n output ( p a n e l 2-1); • C o n s u m e r durables purchases are m o r e volatile t h a n output ( p a n e l 2-2); • I n v e s t m e n t is three times more volatile than o u t p u t ( p a n e l 2-3); • G o v e r n m e n t expenditures are less volatile than output ( p a n e l 2-4); • Total hours worked has about the same volatility as output ( p a n e l 3-1); • Capital is m u c h less volatile than output, b u t capital utilization in m a n u f a c t u r i n g is more volatile than output ( p a n e l s 3-2 and 3-3)11; • E m p l o y m e n t is as volatile as output, while hours per worker are m u c h less volatile than output (panels 4-1 and 4-2), so that most o f the cyclical variation in total hours worked stems from changes in employment; • Labor productivity (output per m a n - h o u r ) is less volatile than output ( p a n e l 4-3);
10 For a discussion of open economy stylized facts see Baxter and Stockman (1989), Back-us and Kehoe (1992) and Baxter (1995). 1~ This measure of capacity utilization, constructed by the Federal Reserve System, is subject to substantial measurement errol, see Shapiro (1989).
Ch. 14.. Resuscitating Real Business Cycles
939
• The real wage rate is much less volatile than output (panel 4-4). Comovement: Figures 2 through 4 show that most macroeconomic series are procyclical, that is, they exhibit a positive contemporaneous correlation with output. The high degree of comovement between total hours worked and aggregate output, displayed in panel 3-1, is particularly striking. Three series are essentially acyclical wages, government expenditures, and the capital stock - in the sense that their correlation with output is close to zero 12. Persistence: All macroeconomic aggregates display substantial persistence; the firstorder serial correlation for most detrended quarterly variables is on the order of 0.9. This high serial correlation is the reason why there is some predictability to the business cycle. In presenting these business cycle facts, we are focusing on a small number of empirical features that have been extensively discussed in recent work on real business cycles. For example, in the interest of brevity, we have not discussed the lead-lag relations between our variables. In choosing the series to study, we have also left out nominal variables, whose cyclical behavior is at the heart of m a n y controversies over the nature o f business cycles 13. However, we do report the cyclical behavior of a measure of the expected real rate of interest from Stock and Watson (1999) in Table 1. This real interest rate is constructed by subtracting a forecast o f inflation from the nominal interest rate on US treasury bills. There is a negative correlation of the real interest rate with real output contemporaneously and, indeed, this negative relationship is even stronger between real output and lagged real interest rates. Many modern macroeconomic models, including real business cycle models, have difficulty matching this feature of business cycles ~4
12 The observation that the real wage is not tightly related to the business cycle goes back to Dunlop (1938) and Tarshis (1939) who stressed that this was at odds with Keynesian models. This finding is somewhat dependent on precisely how the real wage is constructed,depending on whether the numerator (the wage) includes various compensation items and on the index in the denominator (the price level). Two particular features of wage measurement that affect its cyclical behavior are as follows. First, firms pay for overtimehours in an expansion and layoffregular hours in a recession. Second, there is a cyclical composition bias in the labor force lowerquality workers are hired in expansions - which suggests that the real wage per efficiencyunit of labor effort is procyclical. 13 See Stock and Watson (1999, Sections 3.4, 3.6, and 4.1) for a discussion of literature and empirical results. 14 King and Watson (1996) find this negative "leading indicator" relationship between the real interest rate and real activity, using BP filtered data. They also show that a number of modem macroeconomic models, including the basic RBC model, are unable to match this fact even when driven by complicated forcing processes that allow them to match most other features of the business cycle. However, while this result is provocative, it is important to stress that the behavior of this real interest rate involves assuming that the inflation forecasting equation is temporallystable and that agents know this forecasting structure in advance.
R.G. King and S.T. Rebelo
940 0.6.
L a b o r ' s Share of O u t p u t
0.575. s', / t k/ '. / ~j/ ,,~
0.65 •
0.525-
~i•
> ?
"W
<'j
i~ ;
=~" j
i l t!j
b!
.... 4 7
"2
'
D
. . 62 . . .
7~
67
'
"
'
'2
'
"
'
92 '
'
Date
0.25 -
Investment - Output Ratio
0.2-
0.15 -
0.1-
0.o5 -
oi
'
47
'
52
D
'
"~
'
D
'
"2
'
7,
'
"2
'
6',
72
'
Daia
6>75
Consumption - Output Ratio
0.7 \J'lt.
0.65
J
,,.#
J
0.6 0.55
o%
,
. 52
. . .
57
'2
'
D
'
' 72
'
7,
. . .82 .
"2
87
Date
11oo
Hours per Person / i~
j~
/
1000
~J
l
<ji
660
2
\/
000
850 . . . . .
47
,
52
.
,
,
62
,
.
,
,
,
72 Date
77
,
.
,
,
,
67
Fig. 5. Growth facts: great ratios and hours per person.
.
,
'
Ch. 14: ResuscitatingReal Business Cycles
941
2.3. Some stylized facts of economic growth While the US time series for many aggregates grow overtime, there are many '~great ratios" that appear to be relatively constant, suggesting that there are a small number of common forces which give rise :to trend growth. As with the systematic patterns of business cycles, this finding :is also consistent across many countries and .time periods, suggesting that there may be a coherent theoretical explanation of its origin. These stylized facts of economic growth were uncovered as applied researchers such as Kuznets (1973)assembled long time series on economic growth. 'They are sometimes called the "Kaldor facts" of growth because Kaldor (1957) drew attention to them: in addition to the constancy o f great ratios, he stressed that the growth-process seemed to involve growth rates and interest rates that were stationary'even'though the'level of economic aggregates were not. The great ratios. Panels 1-3 of Figure 5 illustrate that the .process ,of:sustained growth appears to leave many of the shares of income components and output components relatively unaffected 15. The ratios of investment to output and labor income to output appear to fluctuate around constant means. The ratio of consumption to output does increase from 1952 onwards, but there is nothing like the 'large trend that we saw in output in Figure 1. Stability of the great ratios implies that most ~series have a similar rate o f growth, .so that there is no deterministic trend in the ratios, and that factors causing permanent changes in the 'level of economic activity do so in a way that makes their effects proportional across series. Labor and growth. During long-term economic growth, which most economists believe occurs mainly due to population growth and technical progress, measures 'of labor input per person are also relatively constant asdocumented inpanel 4 of Figure 5. This relative constancy of hours per capita is remarkable given the rise in real wages that accompanies economic growth. Over our sample period, the real wage measure previously studied in panel 4 of Figure 4 grew at 1.76% per year, but there is little evidence of a trend in hours worked per person.
2.4. Implications of stylized facts Some of the facts just described have been influential .in shaping the views of economists about of how the economy operates. In terms of the business cycle facts, the high volatility of investment no doubt underlies Keynes' famous assertion that investors have "animal spirits". At the same time, the low cyclical volatility of capital is often taken to imply that one can safely abstract from movements in capital in constructing a theory of economic fluctuations. The remarkably high correlation
15 Klein and Kosobud (1961) produced an early test of the stability of the "great ratios" in the USA. More recently, King, Plosser, Stock and Watson (1991) drew attention to how the constancy of these great ratios was a cointegration implication about the logarithms of the variables, which they tested for the USA. Evidence on cointegration for other OECD countries is contained in Neusser (1991).
R.G. King and S.T. Rebelo
942
between hours worked and aggregate output has led some economists to believe that understanding the labor market is key to understanding business fluctuations. Finally, the relatively small variability of real wages and the lack of a close correspondence of wages with aggregate output, has led some economists to conclude that the wage rate is not an important allocative signal in the business cycle. The growth facts suggest the importance of building models that feature a common trend in most real aggregates.
3. The basic neoclassical model
In the 1950s and 1960s, aggregate economic activity was analyzed with two very different types of dynamic macroeconomic models. The trend components of aggregate economic activity were studied with "growth models" that stressed three sources of dynamics: population growth, productivity growth and capital formation. The business-cycle components were studied with Keynesian macroeconomic models, which stressed the interaction of consumption and investment but downplayed the importance of capital accumulation and productivity growth. While there were attempts to synthesize these developments towards the end of this period, the study of growth and business cycles most frequently involved very disparate models. Relative to this traditional macroeconomic approach, the real business cycle literature took a very different point of view. Its core is a neoclassical growth model of the form developed by Solow (1956), Cass (1965) and Koopmans (1965). It then follows Brock and Mirman (1972) in making this growth model stochastic, by positing that the production technology is buffeted by random aggregate shocks to productivity. Our introduction to RBC analysis thus naturally begins by reviewing the "basic neoclassical model", which has implications for both growth and business cycles. In this section, we focus on the structure of the model, trace some of its implications for capital accumulation, and discuss Solow's work on productivity measurement. In the next section, we discuss its business cycle properties.
3.1. The structure The basic neoclassical model is built on assumptions about preferences, endowments and technology that are designed to capture key features of growth and business cycles, while building a model economy that is readily amenable to economic analysis. Preferences: The economy is populated by a large number of infinitely lived agents whose expected utility is defined as O<3
Eo ~
btu(Ct, Lt),
b > 0,
(3.1)
t=O
where b denotes the discount factor, Ct represents consumption and Lt leisure. The symbol E0 denotes the expectation of future values of C and L based on the information
Ch. 14: Resuscitating Real Business Cycles
943
available at time zero 16. The infinite horizon assumption, which greatly simplifies the mathematical analysis o f economic growth and business cycles, is usually justified by appealing to the presence o f altruistic links across generations [Barro (1974)]. However, it can be viewed as an approximation to an economy with many long-lived agents 17. In our exposition o f this model, we treat the population as constant for simplicity, although we discuss the consequences of relaxing this assumption at various points below. The momentary utility function u(Ct, Lt) in Equation (3.1) is assumed concave and obeys regularity conditions discussed in the Appendix. It implies a preference for smooth profiles o f consumption and leisure. It also implies a willingness to substitute across time if interest rates and wage rates imply differing costs of consumption and leisure at different dates. Thus, the neoclassical model imbeds a form of the permanent income hypothesis of Friedman (1957). Endowments: The fundamental endowment that individuals have is their time, which can be split between work (Nt) and leisure activities (Lt). Normalizing the total amount o f time in each period to one, the time constraint is:
Nt + Lt = 1.
(3.2)
We abstract from other endowments of resources since the production from unimproved land and from nonrenewable resources is a small fraction o f output in most developed countries. Technology: The output o f the economy is assumed to depend on a production function that combines labor and capital inputs. To capture the upward trend in output per capita that is shown in Figure 1, the basic neoclassical model incorporates secular improvement in factor productivity. In particular, output (lit) depends on the amounts o f capital (Kt) and labor (Nt) according to a constant returns to scale production function which satisfies regularity conditions discussed in the Appendix.
Yt = AtF(Kt, NtXt),
(3.3)
where At is a random "productivity shock" variable, whose law of motion will be described further below, and Xt represents the deterministic component o f productivity. This latter component of productivity is assumed to expand at a constant rate, Xt+ 1 = yXt,
y > 1.
(3.4)
16 TO simplify, we adopt a dating convention that does not distinguish between "planning time" for the individual and "calendar time" for the economy. Alternative presentations that emphasize this distinction would write the objective as E t }-~)~obJu(Ct+j,Lt+j), where t is calendar time andj is planning time. 17 Rios-Rull (1994) finds that an overlapping generations model calibrated to the age structure of the US population has business cycle properties that are similar to an infinite horizon model.
R.G. King and S.T. Rebelo
944
The output o f the e c o n o m y c a n be used for consumption or investment (It) so that an additional resource constraint is:
(3.5)
I1, = c , + 1,1
This equation corresponds to the basic national i n c o m e accounting identity for a closed economy with no government. The stock of capital evolves according to: Kt+ l = It + (1 - 6)Kt,
(3.6)
where 6 is the rate o f depreciation. This formula coincides with the one used in practice to estimate the stock o f capital according to the "perpetual inventory method ''18. The form o f the production function (3.3) is motivated by the growth facts and was widely employed in growth models after Phelps (1966) showed that steady-state growth - a situation in which all variables grow at a constant rate - required that the deterministic component o f technology be expressible in labor augmenting form in economies with Equations (3.5) and (3.6) 19~ In fact, in the feasible steady states of this model consumption, investment, output and capital all grow at the same rate - the rate o f trend technical progress - so that the great ratios are stationary. Initial conditions: The economy starts out with a capital stock K0 > 0. It also begins with a level o f the technology trend X0 > 0, which we set equal to unity for convenience, and an initial productivity shock A0 > 0.
3.2. Steady-state growth and transforming the economy Our assumptions on the production side o f the. model ensure that a steady-state path is feasible in the face o f the trend productivity expansion in X~. However, additional assumptions are necessary to make such a steady state desirable. In the standard fixed labor version o f the basic neoclassical model momentary utility has to take the form 1
u(C) = ~-L-~[C
1-o
- 1],
(3.7)
where cr > 0. This utility function insures that the marginal rate o f substitution between consumption at dates t and t + 1 depends only on the growth rate o f consumption. 18 In practice the perpetual inventory method allows the depreciation rate to vary through time according to empirical measures of economic depreciation schedules. Ambler and Paquet (1994) study a RBC model with depreciation shocks. 19 Three types of technical progress frequently discussed in the literature can be represented in a general production function:
Yt = X y F (KtXK, NtX,). The variable X'tH represents total factor augmenting (Hicks-neutral) technical, progress, YtK capital augmenting technical progress, and Xt labor augmenting (Harrod-neutral) technical progress,. When the production fimction is Cobb-Douglas these different forms of technical progress are interchangeable and, hence, they are all consistent with balanced growth. For all other production functions, the only form of technical progress consistent with steady-state growth is labor augmenting,
Ch. 14:
Resuscitating Real Business Cycles
945
In the basic neoclassical model of growth and business cycles, which features endogenous labor supply, a steady state also requires that hours per person be invariant to the level of productivity. King, Plosser and Rebelo (1988a,b) show that the momentary utility function must be expressible as b/(C, L) = ~
{ [ C v ( L ) ] 1-g _ 1},
(3.8)
which also implies exactly offsetting income and substitution effects of wage changes on labor supply 2°. The function v(.) satisfies regularity conditions discussed in the Appendix. When these restrictions are imposed, it is possible to transform the economy - so that steady-state growth is eliminated - by scaling all of the trending variables by the initial level of X: Using lower case letters to denote these ratios, for example yt = Yt/Xt, we can then write the optimal growth problem as maximizing the transformed utility fimction: C~
(3.9/
~-~/3tu(ct,Lt) t=0
with/3 = by 1-~ being a modified discount factor satisfying 0 < /3 < 1. Utility is maximized subject to the transformed constraints: Nt
= 1 - Lt,
(3.1 O)
Yt
= AtF(kt,Nt),
(3.11)
Yt
= Ct + it,
(3,12)
ykt+ l = it ÷ (1 - 6)kt.
(3.13)
Relative to an economy in which there is no growth due to X, this transformed economy involves an altered discount factor and a slight modification of the capital accumulation equation. Given this close correspondence, RBC analyses sometimes omit growth all together or simply start with the transformed economy 21.
20 That is, suppose that Equation (3.8) is maximized subject tothe static budget constraint C <~ w(1 -L). The equality of the real wage with the marginal rate of substitution between leisure and consumption implies CDv(L) _ [w(1-L)]Dv(L) W
=
v(L)
v(L)
'
with the latter equality following from eliminating consumption using the budget constraint. Changes in w have no effect on the optimal level of leisure and labor supply. 21 By leaving out population growth, we have essentially proceeded in this manner. However, since productivity is labor-augrnenting~ we can reinterpret the stationary transformation as.one that involves dividing through by both the population and the productivity of labor. Under this interpretation, ~' is the growth rate of population and productivity.
946
R.G. King and S.T. Rebelo
Constraints (3.11), (3.12), and (3.13) can be summarized by the equation ct + ykt + ~ = A t F ( k t , N t ) + (1 - 6)kt.
(3.14)
3.3. Optimal capital accumulation
The optimal path of capital accumulation can be obtained by choosing sequences for consumption {ct}~0, leisure {Lt}~0, labor {Nt}~-0 and the capital stock {kt+ l}~0 to maximize Equation (3.9) subject to conditions (3.10) and (3.14). For this purpose, we form the "Lagrangian" O<3
L = Z
fitu(ct'Lt)
t=O
+ ~ffXt[AtF(kt,Nt)
+ (1 - b)kt - ct - 7kt+ 1]
t=O oG
t=O
The first-order conditions include ct
: DlU(Ct,Lt) = L ,
Lt
: D2u(ct,Lt) = cot,
Aft
: L A t D 2 F ( k t , N t ) = cot,
kt+l : [3)~t+l[At+lD1F(kt+l,Nt+l)+ 1 - 6 ] = yAt,
(3.15) (3.16) (3.17) (3.18)
where we use the notation Diu(c, L) to denote the partial derivative of the function u(c,L) with respect to its ith argument. The first pair of these efficiency conditions dictate that the marginal utility of consumption be set equal to its shadow price [associated with the constraint (3.14)] and that the marginal utility of leisure be set equal to its shadow price (associated with the time constraint Nt + Lt = 1). The second pair of efficiency conditions dictate that the utility value of goods produced with a marginal unit of work (the marginal value product &tAtD2F(kt, Nt)) equal its utility denominated cost (cot) and that the present value of the future product of capital ([~t+ 1[At+ 1DlF(kt+ 1,Nt+ 1) + 1 - 6]) equal its current utility cost (T),t). An optimal consumption, leisure, work and capital plan - sequences {ct}~0, {Lt}~0, {Nt}~0, and {kt}~ 0 - satisfies these first-order conditions, the original constraints, the initial condition requirement on kt and the transversality condition, l i m t ~ fit,~tkt +j = O. Optimal capital accumulation in the basic neoclassical model is a "general equilibrium" phenomenon in three ways. First, the choices of consumption, labor and capital accumulation are interdependent at each point in time and across time:
Ch. 14: ResuscitatingReal Business Cycles
947
a solution for optimal capital accumulation involves specifying sequences for all three of these variables. Second, the requirement that the optimal decisions must respect the resource constraints of the economy is signalled by the shadow prices (cot and )~t). An optimal capital accumulation plan thus also involves specification of sequences of these prices. Third, if these shadow prices were market prices for individual households, then they would similarly signal these agents to supply and demand the optimal quantities. That is, there is an equivalence between the optimal quantities chosen by the social planner and those in a dynamic competitive general equilibrium in the basic neoclassical model. We will thus move between optimal and market outcomes in our discussion of the basic model as it seems useful in the next several sections. We will return later to discuss how work on real business cycles relates to other developments in dynamic stochastic general equilibrium modeling.
3.4. The nature of the steady state There is a unique stationary state that occurs in the transformed economy when At = A for all t. The first-order conditions can be used to describe this stationary state in a recursive manner. First, the capital accumulation efficiency condition implies that
AD1F(k, N) = (r + 6),
(3.19)
where r = ~ - 1 is the stationary state real interest rate and r + 0 is the stationary state rental price of capital. Given that the production function is constant returnsto-scale, the marginal product of capital depends on the capital-labor ratio k rather than on the levels of the factors. Accordingly, Equation (3.19) determines the capitallabor ratio as a function of productivity and the rental rate. Second, given this capitallabor ratio and the level of A, the marginal product of labor is also determined, since ADzF(k, N) = ADzF(~, 1). Thus, there is a real wage rate w = co/;. that is determined independently o f the total quantity of labor:
w=~=AD2F(k,1). Third, there are unique levels of work, consumption and the shadow price of consumption that satisfy the remaining equations. We know that the variables in the original, untransformed economy are related to those of the transformed economy by a simple scaling procedure, Yt = ytXt, etc. Hence, if the transformed economy is in a stationary state, then the original economy will be in a steady state with many variables - including, consumption, capital output and real wages - growing at the same rate. Other variables will be constant, notably work effort and the real interest rate.
R.G. King and S, T. Rebelo
948
Output
Capital
0-
0.
-0.05'-
-0.2.
-0.1 -0.4.
~=~o ~ j
-0.15 ~
E
-0.6. -0.0 •
,o.25 -
~'~
. . . . . . .
-0.3 :
-0.351
-t.2,
2
3 4
;
:
2 0 4
5 6 7 8 9 10 11 12 13 14 15 16 ~7 ,18 19 20
:
;
',
•0,1.
1
-0.2 -
~
O.6
:
:
:
:
:
;
:
:
:
:
0.
1.2
~
:
Consumption
and Labor
1.4
0.8
:
Quarters
Quarters
Investment
:
5 0 ? 8 9 1011121314151617181020
.... c,
i
"" ~
~0.3 •
~ -0,4.
0,4
4/.5
0.2, -O.6
2 2
3
4
5
6
7
8
9 10
1
1
14 15 ~6 17 18 19 20
3
4
5 0
7 8 9 10 11 1213 14 15 16 17 18 19 20
-O.7.
Quarters
Real Interest Rate
16
0
Real Wage
14 .
12
-0.1
.-0.05 ... I -0.15
~ ~,~
~8
" ~
-0.2
i
O~
I
I
I
I
I
I
I
I
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20
!
I
I
I
Quarters
;
:
:
;
:
~
2
3
4
5
6
7
0
9 10 11 12 13 14 15 16 17 18 19 20 Ouartem
Fig. 6. Transitional dynamics: Basic RBC model (stars); fixed labor model (circles); dashes in mid left-hand panel represent labor response.
3.5. Transitional dynamics Transitional dynamics arise whenever the intitial capital stock is different from its steady-state value 22. For stationary versions of the fixed labor model, Cass (1965) and Koopmans (1965) established that it is always optimal for the economy's capital stock to move monotonically toward the stationary level from any positive initial level o f
22 In the transformed economy, this is the movement from an initial level of capital k0 to the stationary level k.
Ch. 14: Resuscitating Real Business Cycles
949
capital. Working to establish this stability theorem, Cass and Koopmans were hampered by the absence of an explicit solution to the model, which stemmed from the presence of many interdependent choices for consumption and capital at different dates. Thus, they were able to establish the stability property, rather than ascertaining how the pace of the transition process depended on the underlying preferences and technology. More precise descriptions required the detailed specification of preferences and technology, with near steady-state linear approximations sometimes being used to evaluate the nature of the global transitional dynamics. Figure 6 illustrates the nature of these local transitional dynamics of capital, as well as the related movements in output, investment and consumption. There are two sets of paths in each of the panels: the ' o ' path describes the fixed-labor model used by Cass and Koopmans and the ' . ' path describes the variable-labor model used in RBC analysis. In these panels, all variables are displayed as percentage deviations from their corresponding stationary values. For both models, the economy is assumed to start off with a capital stock that is one percent lower than its stationary value, so that both of the paths in the upper left panel have an entry o f - 1 at the first date. Looking first at the 'o' paths that describe the transitional dynamics of the CassKoopmans model, we see that capital accumulates through time toward its stationary level, i.e., the (negative) deviation from the stationary level becomes smaller in magnitude through time. Since capital is low relative to the steady state, the second panel shows that output is also low relative to the stationary state. Capital is built up through time by individuals postponing consumption. In a market economy, a high real rate of return is the allocative signal that makes the postponement of consumption occur, with the rate of return given by rt = [ A D 1 F ( k t + I , N ) - 6] in the fixed labor economy. Using the preference specification (3.7), in fact, one can show that the growth rate of consumption is given by l o g \( O ct r + ' j) -- - ~1 log ( ~ t l )
~ -1~ [ r t - r ] ,
(3.20)
so that a high real interest rate fosters consumption growth along the transition path 23. The initial level of consumption is set by the wealth o f individuals or, equivalently, so that the efficient path of consumption will ultimately be at the stationary level. In general, as the economy saves to accumulate the new higher stationary level of capital, net investment it - 6kt is positive along the transition path. In this figure gross investment is also higher than its stationary level during the process of capital accumulation. 23 In fact, the value of cr used in constructing Figure 6 is one, so that consumption growth and the rate of return are equal. The time unit of these graphs is a quarter of a year, however, and the interest rate is expressed at an annual rate, so that the slope of the consumption path is one fourth of the annualized interest rate shown in the next to last panel. A basis point is one hundredth of a percentage point, so that an annual interest rate that is 0.10 percentage points above the steady-state level causes consumption to grow from about -0.600 to about -0.575 in the second panel.
R.G. King and S.T. Rebelo
950
When work effort is endogenous, as in the ' , ' path of Figure 6, these transitional dynamics change significantly, although there is still a period of capital accumulation toward the stationary level. The extra margin matters for the speed of the transition. When capital is initially low individuals work harder and produce more output that is used for capital accumulation. This extra effort occurs despite the fact that the real wage (wt = AD~F(kt,Nt)) is low relative to its stationary level. Again, the allocative signal is a high rate of return that makes it desirable to forgo leisure (as well as consumption) during the transition process. In fact, there is a subtle general equilibrium channel that enhances the magnitude of the effect on the rate of return. With more future effort anticipated, the rate of return rt = [ADtF(kt+I, Nt+ 1) - 6] is higher than in the fixed labor case, because additional effort raises the marginal product of capital. Further, this higher rate of return stimulates current work effort. On net, variable effort raises the speed of transition and mitigates the effects of initially low capital on output and consumption, while enhancing the investment response. 3.6. The (Un)importance o f capital formation
The capital accumulation mechanism at the heart of the basic neoclassical model is sometimes viewed as relatively unimportant for growth and business cycles. In the growth area, Solow followed his (fixed saving rate) growth model (1956) with a celebrated demonstration that productivity was much more important to economic growth than was capital formation. It is easiest to exposit this result if we assume that the production function is Cobb-Douglas: Yt = AtK~t-a(NtXt) a,
(3.21)
with the parameter a being measurable as labor's share of national output (an idea which we discuss more below) and thus being constrained to be between zero and one 24. Then, using time series for output, labor and capital, we can compute the Solow residual as: logSRt = log Yt - a logNt - (1 - a) log Kt.
(3.22)
Abstracting from measurement error in outputs or inputs, the Solow residual can be used to uncover the economy's underlying productivity process, log SRt = log(At) + a log(Xt).
(3.23)
To evaluate the importance of capital accumulation to economic growth, Solow (1957) looked at how the average growth rate of output per unit of labor input 24 Our depiction of Solow's (1957) procedure is impressionistic rather than literal. Solow worked in changes rather than levels and incorporated time varying, rather than constant factor shares. Moreover, in ways which anticipate recent developments, he also sought to correct for changes in the utilization of capital.
Ch. 14: Resuscitating Real Business Cycles
951
(the average of log(Yt/Nt) - log(Yt 1/Nt-l)) was divided between growth in productivity (the average of log(SRt) - log(SRt_l)) and growth in capital per unit of labor input (the average of log(KJNt) - log(Kt i/Nt 1)). The result was a surprising one and must also have been disappointing in view of his just completed work on the dynamics of capital accumulation [Solow (1956)]: capital accumulation accounted for only one eighth of the total, with the remainder attributable to growth in productivity. Thus, the transitional dynamics of capital formation turned out to be not too important for understanding economic growth. Moreover, the transitional dynamics of Figure 6 do not display the positive comovement o f output, consumption, investment and work effort that take place during business cycles. Labor and investment are higher than in the steady state when capital is low while consumption and output are below the steady state. Further, consumption is much more responsive to a low capital stock than either labor or output, which is inconsistent with the evidence on relative volatilities reviewed earlier. Sometimes these results are interpreted as indicating that one should construct macroeconomic models which abstract from capital and growth, since the introduction of these features complicates the analysis without helping to understand business cycle dynamics. However, real business cycle analysis suggests that this conclusion is unwarranted: the process of investment and capital accumulation can be very important for how the economy responds to shocks. 3.7. Constructing dynamic stochastic models
In this section, we have concentrated on describing the steady state and the transitional dynamics of the basic neoclassical model, as an example of the type of dynamic general equilibrium model now used in RBC analysis and other areas of macroeconomics. There is now a rich tool kit for studying the theoretical properties of stochastic equilibrium in these models, such as the advances described by Stokey, Lucas and Prescott (1989). A systematic analysis of the Brock and Mirman (1972) stochastic growth model, modified to include variable labor supply as above, calls for the application of these methods. We review these developments in the Appendix, using the basic RBC framework to highlight two important issues. First, we characterize the optimal decision rules for consumption, capital, output, investment and labor using dynamic programming. Second, we demonstrate that the outcomes of the optimal growth model are the same as the outcomes of a dynamic stochastic general equilibrium model, in which firms and workers trade goods and factors in competitive markets. This equivalence requires that firms and workers have rational expectations about future economic conditions. Another notable result for this stochastic model, first established by Brock and Mirman (1972), is that the stationary state is replaced by a stationary distribution, in which the economy fluctuates in response to shocks. We have also discussed the local transitional dynamics of the basic neoclassical model illustrated in Figure 6. The development of real business cycle models and dynamic stochastic general equilibrium theory has also heightened interest in methods
952
R.G. King and S.T. Rebelo
for solving and simulating dynamic equilibrium models. In this survey, we rely on now-standard loglinear approximation methods for solving the various real business cycle models that we construct 25. These methods have been shown to be highly accurate for the basic RBC model 26. The application of these methods contains essentially two steps. First, it is necessary for us to specify the utility function, the production fixnction, the depreciation rate and so forth so that we can solve for the steady state of the model economy, working much as we did in Section 3A. Second, we take loglinear approximations to the resource constraints (3.10)-(3.13) and the efficiency conditions (3.15)-(3.18). We then assume that these approximate equations hold in expected value - a certainty equivalence assumption - and solve the resulting expectational linear difference equation system. This yields a system of linear difference equations forced by random shocks, f r o m which moments and simulations can b e easily computed.
4. The Real Business Cycle shock The stark simplicity of the analysis of Prescott (1986) provided a dramatic demonstration of the empirical power of RBC models. His results were surprising because the neoclassical model - even with stochastic productivity - was widely viewed as suitable for long-run analysis, but not for the study of business cycles. In particular, Prescott (1986) showed that a simulated version of the basic neoclassical model could generate business cycle statistics like those in Table 1 when driven by productivity shocks. To make these shocks "realistic", Prescott required that they have the same statistical properties as the actual residuals from an aggregate production function computed using the method of Solow (1957). Building on this idea, Plosser (1989) showed that empirical Solow residuals constructed from post-war US data produced model time series for macroeconomic activity that appeared visually close to the actual business cycle fluctuations on a period-by-period basis. In this section, we display these moment and time-path results as an introduction to real business cycles. 4.1. The drioing process
The crucial assumption in RBC analysis is that the stochastic component of productivity can be extracted from the empirical Solow residual using Equation (3.23), log(SRt) = log(At) + a log(Xt). Then, assuming that log(At) follows an AR(1) process, log(At) = p log(At-O + et,
(4.1)
and exploiting the fact that log(Xt) = log(Xt_l)+ log(y), it is possible to estimate the stochastic process for productivity and, in particular, the persistence parameter p and 25 There are versions of the basic RBC model that can be solved analytically but require restrictive assumptions on preferencesand technology. See, e.g., Radner (1966), Long and Plosser (1983), Devereux, Gregory and Smith (1992), and Rebelo and Xie (1999). 26 See, e.g., Danthine, Donaldson and Mehra(1989), Christiano (1990), and Dotsey and Mao (1992).
Ch. 14: ResuscitatingReal Business Cycles
953
the standard deviation of the innovation et. Todo this, one fits a linear trend to logSRt in order to compute y. Then, one uses the residuals from this regression to estimate p and standard deviation of~t. For our quarterly data set, the resulting point estimates are 0.979 for p and .0072 for the Standard deviation o f et. The high estimated value of p reflects the substantial serial correlation in panel 4 o f Figure 3, where the variable described as productivity is the Solow residual.
4.2. :Calibrating and solving the model The work of Kydland and Prescott (1982) and Long and Plosser (1983) illustrated the value of exploring the workings of stochastic dynamic models by using a "reasonable" set of parameter values. Following the methodological recommendations of Lucas (1980) in his influential "Methods and Problems in Business Cycle Theory," Kydland and Prescott relied on microeconomic empirical studies and on the long-run properties of the economy to choose parameter values. To explore the operation of their multiple sector business cycle model, Long and Plosser (1983) drew parameters from inputoutput tables for the US economy. This new approach, which came to be known as "calibration" has at times been controversial. This partly reflects the fact that most research in macroeconomics followed one of two other routes prior to the rational expectations revolution 27. First, many authors explored qualitative features of theoretical models and compared them informally with empirical evidence. Second, many researchers formally estimated and tested models. To see how the calibration approach works, let us apply it to our basic neoclassical model. There are broadly two parts of calibration. One must begin by choosing functional forms which imply that certain parameters are important and then one must assign parameter values. The great ratios in the steady state: From our discussion in Section 3.4 above, we know that the production side of the model determines nearly everything about the steady State. We choose the discount factor so that the steady-state real interest rate coincides with the average return to capital in the economy. This is 6.5% per annum, if we equate it with the average return on the Standard and Poor 500 Index over the period 1948-1986. Since we are interested in a quarterly model, we choose the discount factor b so that the quarterly real interest rate is 0.065/4. In the Cobb-Douglas production function (3.21), there are three parameters a , X and A. We set a equal to
27 This calibration approach is commonlyassociated solelywith the RBC program, but it was also used in the early 1980s by researchers studying the effects of nominal contracting on economicfluctuation, such as Blanchard and Taylor. The calibration approach had been previously used in other areas of economics, such as public finance and international trade, which employedcomplicated, though static, general equilibrium models. Calibration is now routine in a wide range of macroeconomicareas, although it was controversial in the late 1980s because of Kydland and Prescott's (1991) insistence that it should be used instead of standard econometricmethodology.A nontechnical review of the interaction between the quantitative theory approach and econometricsis provided by King (1995).
R.G. King and S.T. Rebelo
954
two-thirds which is a standard value for the long run US labor income share 28. Both X0 (the initial level o f technical progress) and the m e a n value o f A are parameters which affect only the scale o f the economy, and hence can be normalized to one. The growth rate o f technical progress is chosen to coincide with the average growth rate o f p e r capita output in the U S A during the post war period (1.6% per annum), which implies a quarterly gross growth rate o f technical progress o f 7 = 1.004 29. The rate o f depreciation is chosen to be 10% p e r annum (6 = 0.025) 3°. Taking all o f this information together, we can solve for the capital-labor ratio k/N, using the requirement that r + 6 = A D 1 F ( k , N ) . In the C o b b - D o u g l a s case we obtain: k
N
_
[ r+6
]
"
In turn, this implies that the steady-state value o f the capital-output ratio is k/y = ( k / N ) / ( y / N ) since the average product o f labor y / N = A ( k / N ) l-a. We also thus compute the steady-state ratios i/y = ( y - 1 + 6 ) ( k / y ) and c/y = 1 - (i/y), as well as the steady-state real wage rate w = aA(k/N) l-a. P a r a m e t e r i z i n g utility: The constant elasticity class o f utility functions (3.8) is motivated b y having steady-state growth in productivity lead to steady-state growth in consumption and a constant average level o f hours per person. In our discussion o f this basic model, we use the momentary utility function u ( c t , L t ) = log(ct)+ _1- ~ 0 (L~- r l - 1),
(4.2)
Once we specify the parameter which governs the labor supply elasticity (r/) we choose 0 to match steady state N , which is about 20% o f the available time in the U S A in the postwar period 31 . The studies o f Prescott (1986) and Plosser (1989) used the " l o g - l o g " case, which makes utility u(Ct, Lt) = l o g ( C t ) + 0 log(Ll), motivating this form b y arguing that a range o f microeconomic and asset-pricing evidence suggests a coefficient o f risk aversion o f ~r = 132. We begin with this case (in which ~/= 1) and then consider some alternative values in Section 6 below. 28 This is higher than the value of a = 0.58 used in King, Plosser and Rebelo (1988a,b). This number is somewhat sensitive to the treatment of the government sector and of proprietor's income. See Cooley and Prescott (1995) for a discussion. 29 Many calibration studies ignore growth all together, as we ignore growth in population. Incorporating population growth would raise the appropriate value of 7 to 1.008. 30 Here we use a conventional value for 6, but there is some evidence that it should be lower. The ratio of capital consumption allowances to the capital stock (excluding consumer durables and government capital) for the USA in the post war period takes values of the order of 6 percent [see Stokey and Rebelo (1995, Appendix B)]. The average investment share is very sensitive to y and 6, but the near steady-state dynamics are not. c which can be solved for 0. 3~ That is, the condition w = D2u(c,L) Dlu(c.r) = ~Oc implies that a = - ~ - ~ON;, 32 There is substantial uncertainty about ~r, which tends to be estimated with a very large standard error, see Koeherlakota (1996).
955
Ch. 14: Resuscitating Real Business Cycles Table 2 Calibration of baseline model ~r
b
0
~/
~
a
6
P
ge
1
0.984
3.48
1
1.004
0.667
0.025
0.979
0.0072
Collecting these results, we have Table 2 listing the parameters that are used in the baseline model in the remainder o f this section. Loglinearizing the model economy: The next step in solving the model is to approximate its various equations, which is most frequently done so as to produce log-linear relations. Sometimes, as with the utility specification (4.2), it happens that the relations o f interest are exactly log-linear to start. For example, the consumption efficiency condition (3.15) is At = DlU(Ct,Lt) = (ct) -I and the leisure efficiency condition (3.16) is cot = ~twt = D2u(ct,Lt) = L t ~, so that: -ct
= •,
-t/Lt = (~t + ~t).
(4.3) (4.4)
In these expressions, a circumflex ("hat") over a variable represents proportionate deviations o f that variable from its steady-state level, ~t = log(ct/c), etc. The C o b b - D o u g l a s production function also implies that the efficiency condition (3.17) - which can be rewritten as an equality between the real wage rate and the marginal product o f labor - is exactly loglinear, wt = At + (1 - a ) ( L - N t ) ,
(4.5)
i.e., the real wage is raised by productivity and by increases in the capital labor ratio. Other equations o f the m o d e l are not exactly log-linear and so must be approximated. The time constraint is Nt + Lt = 1 so that small changes in labor and leisure satisfy dNt + dLt = 0 and thus )~"v d NN' + L @ = 1. Since log(-~) ~ ~dNt - , we conclude33: (N)Nt + (L)Lt = 0.
(4.6)
33 An alternative derivation of this and other results involves assuming that the behavioral equation depends on A/t = log(Nt/N) etc. and then taking a linear approximation in the hatted variables. For example, the time constraint is N exp()~,)+ L exp(I,t) = 1, so tha~t is approximately Equation (4.6), given that a first-order Taylor series approximation to exp(~t) about Nt = 0 is Nt.
956
R.G. King and S.T. Rebelo
A 1.(1 a)~'t 7tra so that a Since the constraint on uses of goods takes the form ct + it = ~t'~t mixture of the two methods used above yields (4.7) Other equations such as (3.6) and (3.18), which contain variables at different dates, can be similarly approximated. The result is a loglinear dynamic system that can be solved numerically. Interpreting aspects o f the model economy: One benefit of this solution strategy is that the researcher maybe able to interpret certain aspects of the model economy prior to obtaining its numerical solution. For one example; Equation (4.5) can be interpreted as a description of "labOr demand", so as to discuss the influence of productivity, the real wage rate and the stock of capital on the quantity of labor. For another, combining Equations (4.4) and (4.6), we arrive at a "labor supply schedule" that relates the quantity of labor to the real wage and the shadow price of goods, Le., L
so that a higher value of r/ lowers the labor supply elasticity. Individually, these equations describing "labor supply" and "labor demand" can be used to evaluate the consistency of the macroeconomic model with microeconomic evidence. Taken together, they provide an explanation of how the quantity of labor and the real wage rate respond to variations in productivity, the capital stock, and the shadow price. 4.3. Business cycle moments
One way of evaluating the predictions of the basic RBC model is to compare moments that summarize the actual experience of an economy with similar moments from the model. On the basis of such a moment comparison, Prescott (1986) argued that the basic RBC model predicts the observed "large fluctuations in output and employment" and, more specifically, that "standard theory.., correctly predicts the amplitude o f . . . fluctuations, their serial correlation properties, and the fact that investment is about six times as volatile as consumption." Table 3 reports summary statistics on HP cyclical components of key variables for simulations of the basic neoclassical model driven by productivity shocks. These statistics are comparable to those reported in Table 1 for the US economy. Volatility o f output and its components: Productivity shocks produce a model economy that is nearly as volatile as the actual US economy. More specifically, comparing the ratio of model and empirical standard deviations, Kydland and Prescott (1991) have argued that the real business cycle model explains the dominant part
Ch. 14: Resuscitating Real Business Cycles
957
Table 3 Business cycle statistics for basic RBC model a,b Standard deviation
Relative standard deviation
First-order autocorrelation
Contemporaneous correlation with output
Y C I
1.39 0.61 4.09
1.00 0:44 2.95
0.72 0.79 0.71
1.00 0.94 0.99
N Y/N w r A
0.67 0.75 0.75 0,05 0.94
0.48 0.54 0.54 0.04 0.68
0.71 0.76 0.76 0.71 0.72
0.97 0.98 0.98 0.95 1.00
All variables have been logged (with the exception of the real interest rate) and detrended with the HP tilter. b The moments in this table are population moments computed from the solution of the model. Prescott (1986) produced multiple simulations, each with the same number of observations available in the data, and reported the average HP-filtered moments across these simulations. a
o f business cycles 34. For the numbers in Tables 1 and 3, the Kydland-Prescott variance ratio is 0.77 = (1.39/1.81) 2, suggesting that the RBC model explains 77% o f business fluctuations. Using a variation on the basic m o d e l which introduces costs o f moving labor out o f the business sector, Kydland and Prescott (1991) argued that "technology shocks account for 70 percent o f business cycle fluctuations". Using a slightly different version o f the model Prescott (1986) h a d previously attributed 75% o f output fluctuations to productivity shocks. The real business cycle m o d e l is consistent with the observed large variability o f investment relative to output, as indicated by the relative standard deviations reported in the second columns o f Tables 1 and 3. In particular, investment is about three times more volatile than output in both the actual economy (where the ratio o f standard deviations is 5.30/1.81=2.93) and the model economy (where the ratio o f standard deviations is 2.95). Consumption is substantially smoother than output in both the model and actual economies. In our basic model, however, consumption is only about one-third as volatile as output while it is over two thirds as volatile as output in the US economy. We return to discussion o f this feature o f the economy in Section 6 below. Persistence and comovement with output. Business cycles are persistently high or low levels o f economic activity: one measure o f this persistence is the first-order serial correlation coefficient. Table 3 shows that the persistence generated by the basic model
34 See Eichenbaum (1991) for a criticism of this interpretation of the variance ratio.
958
R.G. King and S.T. Rebelo
is high, but weaker than in the data (see Table 1). The relative standard deviations also provide a measure of the limited extent to which the basic RBC model amplifies productivity shocks: in terms of its business cycle behavior, output is 1.48 times as volatile as productivity. Business cycles also involve substantial comovement of aggregate output with inputs (such as labor) and the components of output (such as consumption and investment). Accordingly, Table 3 reports the contemporaneous correlation of output with the other four measures. All of these correlations are quite high, indicating the basic RBC model captures the general pattern of comovement in the data. However, the empirical correlations of output with labor, investment and productivity are substantially smaller than their model counterparts. From this battery of statistics, we can see that the RBC model produces a surprisingly good account of US economic activity. However, there are also evident discrepancies. Notably, consumption and labor input in the basic model are each much less volatile than in the data. Further, the basic RBC model produces a strongly procyclical real wage and real interest rate, which does not accord well with the US experience summarized in Table 1. 4.3.1. Simulations o f US business cycles
Figure 7 depicts US data together time series generated by simulating the model with the innovations to the actual US Solow residual. On the basis of results similar to those in this figure, Plosser (1989) argued that "the simple (RBC) model appears to replicate a significant portion of the behavior of the economy during recessions and during other periods" 35. Indeed, looking at the first panel of Figure 7, it is clear that the basic RBC model gives quite a good account of the quarter-to-quarter variation in the output time series. The correlation between these series is 0.79; the model also works well in all major recession and expansion episodes. Turning to the individual components of output, the performance of the RBC model is also surprisingly good for such a simple model. Consumption in the model and the data are strongly positively associated (the contemporaneous correlation is 0.76), although the model's series in the bottom panel of Figure 7 is much less volatile than the actual experience, as suggested by the previous discussion of moments above. Investment in the model and the data also move together in the third panel of Figure 7, although model investment appears to lead actual investment by one to two quarters. One measure of this lead is that the contemporaneous correlation of model and actual investment is 0.63 and the correlation between actual investment and past model investment is 0.73 at one lag and 0.69 at two lags. While the volatility of labor is
35 This section uses a model that is essentially the same as that in Plosser (1989), but our simulated time series are slightly different due to (i) differences in data; and (ii) differences in filtering. Plosser's use of the first-differencefilter emphasizes higher frequency components of time series relative to our use of the HP filter.
Ch. 14." Resuscitating Real Business Cycles
959
6-
Output
g--2-
51
56
61
66
71
76
81
86
91
96
Date
Labor
4
^
2.
~-2
Input
~
J
A
l' l V 1 -
g.
4
i tf
V
"I/
v
V"
-6.
, ; ,1 , , , o , ,
-8.
, 1, , , , o ,6, , ,
"
"
___~2~o,
. . . . . 76. . . . . . . .81. . . . . . .86. . . . . . .91. . .
1
96
Date
Investment
2,;t
,
-15 ~-
.....
I
51
56
61
66
71
76
81
86
91
96
Date
Consumption
654,
Data
3i 2-
7,-
~- o -1-2-
-3 i I
I
I I 51
I
I
I I 56
I
I
I I 61
I
I
] I 66
I
I
I I 71
I
I
I I 76
I
I
I : 81
',
',
: : 86
;
',
', ', 91
',
:
: 96
Date
Fig. 7. Basic model: simulated business cycles. Sample period is 1947:2-1996:4. All variables are detrended using the Hodrick-Prescott filter.
R.G. King and S.T. Rebelo
960
broadly similar in the data and in the model, there is much less of a period-to-period correspondence between labor and output in the simulations in the second panel of Figure 7 than there is in the US economy. 4.4. The importance of capital accumulation The process of capital accumulation is central to business cycles in the RBC framework. To highlight this importance, consider the effect of a positive productivity shock under the assumption that investment is zero at all dates. Then, higher productivity would raise the level of the production function and the marginal product of labor schedule, with each increasing proportionately. From the standpoint o f the representative individual, this would work just like a secular rise in the real wage rate, with exactly offsetting wealth and substitution effects on labor. Thus, hours per worker would be invariant to productivity, with consumption moving one-for-one with output 36. By contrast, in the RBC framework, investment increases in response to a positive productivity shock, i.e., the representative household optimally saves some fraction of the higher current output. Thus, it is also efficient to lower consumption and raise work effort relative to the fixed investment case, producing the cyclical comovements that we see in the actual economy. However, the introduction of capital as a factor of production in the basic model tends to make it difficult to match the behavior of output and labor input that we saw in the first panel of Figure 3, where labor is nearly as volatile as output. Fundamentally, this reflects the fact that capital is not particularly variable over the business cycle (see the second^panelof Figure 3). More specifically, the Solow decomposition indicates that 33t At + aNt + (1 a)tct, so that we expect a one percent change in labor to produce an a = ~ per cent change in output. It also works to mitigate the volatility of labor input, since it makes the marginal product of labor decline with the quantity of labor, given that the capital stock is essentially fixed over the business cycle. That is, despite substantial business cycle changes in investment, these do not have a large effect on the capital stock. =
4.5. Early successes and criticisms The results of Table 3 and Figure 7 illustrate why the last decade has witnessed an explosion of research on real business cycles. The basic RBC model holds the promise of being a coherent framework that integrates growth and business cycles. At the same time, there were clear areas in which the model needed to be improved, so that there
36 With a total factor productivity shock, this exact offset requires that there be a Cobb-Douglas production function, although it holds for any production function if the shock is labor augmenting. While it clearly holds if there is no capital, it also holds if capital is present, as may readily be verified using the line of argument in footnote 20. A key part of this more general result is that capital income increases with the productivity shock.
Ch. 14: Resuscitating Real Business Cycles
961
clearly was important additional work to done. Prescott (1986) summarizes moment implications as indicating that "the match between theory and observation is excellent, but far from perfect". Plosser ('1989) summarizes the model simulations as indicating that "the whole idea that such a simple model with no government, no market failures of any kind, rational expectations, no adjustment costs could replicate actual experience this well is very surprising". Rogoff (1986) warns of the potential power of the RBC model: " T h e . . . real business cycle results.., are certainly productive. It has been said that a brilliant theory is one which at first seems ridiculous and later seems obvious. There are many that feel that (RBC) research has passed the first test. But they should recognize the definite possibility that it may someday pass the second test as well." One notable part of the RBC program is its insistence on the construction of dynamic stochastic general equilibrium models, which is now the accepted approach to macroeconomic analysis across a wide range of research areas and perspectives. Even those who are skeptical o f the central role of productivity shocks have accepted the idea that "the basic methodological approach ... (is) ... relevant to models in which monetary disturbances play a greater role" as Rogoff (1986) forecasted that they would. But it is the other component of the RBC approach that was immediately controversial and remains so to this day: that technology shocks are the dominant source of fluctuations. The striking performance of the basic RBC model drew a strong critical reaction from macroeconomists working in the Keynesian tradition [Summers (1986), Mankiw (1989)]. Their criticisms focused on three main points. First, they questioned some of the parameter values used in the calibration of the model. In particular, they stressed that the model's performance required an empirically unreasonable degree of intertemporal substitution in labor supply. Second, they emphasized the model's counterfactual implications for some relative and absolute prices. The critics observed that the strongly procyclical character of the model's real wage rate was inconsistent with the findings of numerous empirical studies. They also pointed to Mehra and Prescott's (1985) earlier finding that standard preferences, such as Equation (4.2), are incompatible with the equity premium, i.e. the difference between the average rate of return to equities and the risk free rate. 37 In addition, t h e y suggested that a productivity shock theory of the cycle should imply a strongly countercyclical price level. Third, they argued that the use of the Solow residual was highly problematic, leading to excessively volatile productivity shocks. In retrospect, the first two criticisms of RBC analysis had a small impact on the RBC program. Rather than being fragile, the model's performance is surprisingly resilient to variations in its parameters. Much of the model's performance is anchored on three single ingredients: a highly persistent technology shock that is sufficiently volatile, a sufficiently elastic labor supply, and empirically reasonable steady-state shares of
37 See John Campbell (1999) for a detailed discussion.
962
R.G. King and S. T Rebelo
consumption and investment in output 38. The RBC model does not need to rely on a high degree of intertemporal substitution in labor choice. In fact some RBC models [e.g. Greenwood, Hercowitz and Huffman (1988)] assume that this elasticity is zero. However, either intertemporal or intratemporal substitution must be strong enough to produce realistic labor movements, a point to which we will return in Section 6 below. RBC researchers have produced a battery of models that lead to a relatively high elasticity of labor supply. The model's predictions for the real wage can be improved if we step away from the assumption of spot labor markets and incorporate contracts between firms and workers that allow for wage smoothing [Gomme and Greenwood (1995), Boldrin and Horvath (1995)] or other forms of labor contracts [Danthine and Donaldson (1995)]. It is hardly surprising that the assumption of spot labor markets produces unreasonable implications for the real wage. And while research on the equity premium puzzle continues, we now have models that are consistent with some aspects of the equity premium while maintaining the business cycle performance of the basic model 39. Lastly, the studies of Kydland and Prescott (1990) and Cooley and Ohanian (1991) have concluded that the price level is indeed strongly countercyclical during most time periods. It is the final criticism - that the Solow residual is a problematic measure of technology shocks - t h a t has remained the Achilles heel of the RBC literature. The key issues in this area involve quantitative rather than qualitative disagreements. With the exception of the two oil shocks, it is hard to identify the macro shocks that produce the productivity variations suggested by the Solow residual. If these shocks are large and important why can't we read about them in the Wall Street Journal? Also, the Solow residual often declines suggesting that recessions are caused by technological regress. Finally there are several measurement problems that can make the Solow residual a bad measure of productivity at cyclical frequencies. Summers and Mankiw emphasized the importance of labor hoarding, that is, unmeasured variation in labor effort over the business cycle. Perhaps even more important than labor hoarding is the cyclical variability in capital utilization. Solow-residual based measures of technology shocks that do not account for unmeasured variations in labor and capital will tend to be more volatile and procyclical than true shocks to technology. These difficulties arose as well in the earlier literature on growth accounting, where the Solow residual had its origins. The stated goal of that literature was to measure the long run evolution of disembodied technical progress, not the short run behavior of productivity. Its hidden agenda was to make the Solow residual negligible, that is, to measure production inputs well enough that all growth in output could be accounted for by movements in factors of production. For this reason the residual was often referred 38 Given the high correlation between investment and output it is not surprising that the model cannot display enough investment volatility if its share is unreasonably high. As the steady-state investmentoutput ratio increases the volatility of investment has to converge to that of output. 39 See Boldrin, Christiano and Fisher (1995) and Christiano and Fisher (1995). These models employ a two-sector structure and use preferencesthat feature habit formation.
Ch. 14: Resuscitating Real Business Cycles
963
to as a "measure of our ignorance". Growth accountants were horrified when they saw the measure of their ignorance recast as the main impulse to the business cycle. For now we will put the problems associated with the Solow residual as a measure of technology shocks on the back burner. But we return to them in Sections 7 and 8.
5. The central role of productivity shocks
In the standard RBC model, productivity shocks are central to the nature of business cycles. In this section, we will discuss three major aspects o f this relationship. First, we explain that the standard RBC model requires large and persistent productivity shocks, by considering how the comparative dynamics of the model change as productivity persistence is altered. Second, we show how the assumption that agents have rational expectations matters to the nature of real business cycles. Third, we discuss why other shocks cannot easily generate real business cycles in the standard model.
5.1. Productivity shocks must be large and persistent The simple driving process for productivity used by Prescott (1986) and Plosser (1989) provides a natural basis for discussing the volatility and persistence of productivity. These authors modeled the stochastic component of productivity as a first-order autoregressive process, log(At) = plog(At 1) + et. Under this specification, the statistical behavior of the productivity process is influenced by the serial correlation parameter p and the standard deviation of the zero mean "innovations" et. A standard result from time series textbooks [e.g., Hamilton (1994)] is that the autocovariance of log(At) with its own value lagged by j periods is ,,J /-" var(et) l _ p 2 • This autocovariance expression reveals that increases in the variability of the innovations directly raise the variability of productivity. Increases in the parameter p also increase the variability of the time series, since the variance of log(At) is var(Et) 1_p2 • However, an increase in p produces this additional variability by raising the persistence of the productivity series, since the jth-order correlation of log(At) is pJ. Thus, when we say that the standard RBC model requires that there must be large and persistent variations in productivity, we are making several related statements. Mathematically, these can be summarized by saying that the model requires large values of var(et) and o f p . Why does the standard model require large shocks? When we say that the model requires large shocks, we mean that there must be considerable variability in productivity. This statement is based on understanding how output, consumption, and other variables respond to shifts in e in the basic model. In all of the models that we study in this section, for example, output responds to a one percent increase in productivity by rising by no more than two percent: there is not much amplification of the productivity shock by the model. To illustrate the effect of smaller productivity shocks, we recomputed the simulation of the basic RBC model using an alternative series of productivity shocks, which have
964
R.G. King and S.T. Rebelo
an innovation standard deviation that is 0.0012 or about ~ times as large as the Solow residual. The result of this is shown in panels 1 and 2 of Figure 8: real business cycles explain a very small fraction of output and labor volatility. Since the standard RBC model is approximately linear, changes in the standard deviation of the innovations, std(e), simply work to rescale the model's fluctuations. We will return later to discuss more of the details of the computation of these alternative shocks, but at present it is sufficient to note that they were not chosen arbitrarily. Rather, they arise from correcting the Solow residual for the effects of varying capital utilization in ways that we will discuss further in Sections 6-8 below. Why does the standard model require persistent shocks? By saying that the variations in productivity must be persistent, we mean that the series generated from the standard RBC model will display autocorrelation similar to the US data only if p is near one. To discuss this, we consider in detail how the standard RBC model's implications depend on the extent of serial correlation in productivity. We begin by discussing the response of the economy to a serially uncorrelated productivity shock, i.e., the solution of the model when p = 0. While the dynamic responses to this shock shown in Figure 9 are the result of a complex set of factors - the preferences of households for consumption and labor supply, the production function and the mechanism for accumulating capital, and the interaction of households and firms in general equilibrium - the key mechanisms can be easily described. Productivity is assumed to increase by one percent (e = 1) in the initial period (date 1). Given the rise in the marginal product of labor resulting from the increase in productivity, the representative household faces an unusually high opportunity cost of taking leisure in this initial period. While there are offsetting income and substitution effects, the model's preferences were chosen so that a permanent increase in the real wage (such as the one associated with the trend in technical progress) generates exactly offsetting income and substitution effects so that labor and leisure are left unchanged. An implication of this result is that N has to rise in response to a temporary productivity increase. With a temporary shock, there is a much smaller income effect and there is greater incentive to substitute intertemporally, since the current wage is high relative to expected future wages. On net, the positive labor response amplifies the productivity shock: the impact effect on output in Figure 9 is 2%. Half of this response is due to the direct effect of the productivity shock and half due to the increase in labor. The representative agent must choose what the economy will do with all this additional output. One possibility is to consume it all in period one 40. However, this would be inefficient given that the marginal utility of consumption is decreasing, thus inducing a preference for smooth consumption paths. It is optimal to increase consumption both today and in the future. In fact, given that there are many future
40 Our figures make the impact date of the shock period 1, while the earlier theoretical analysis made the initial period zero. The discussion in the text follows the dating conventionin the figures.
Ch. 14." Resuscitating Real Business Cycles
965
Output with small A shocks
64-
2"E o
"?
g.-~, -4-
~T'W"
~
-651
56
61
66
71
76
81
86
91
96
Date
4T
Labor Input w i t h s m a l l A s h o c k s
i
Date
O u t p u t w i t h s m a l l e r labor elasticity
6, 4 2
~o ~.-2.
51
56
61
66
71 Date
76
81
86
91
96
L a b o r Input w i t h s m a l l e r labor elasticity 2
°it
TI ? qI ~ ~ V
" w "?'
"T/" w -
~ 51
56
.... 61
66
71 Date
76
81
o"=' 86
91
96
Fig. 8. Consequences of smaller shocks and smaller labor elasticity. Sample period is 1947:2-1996:4. All variables are detrended using the Hodrick-Prescott filter.
King and S.T. Rebelo
R.G.
966 1.2-
productivity
Capital
1~ 0.8-
~o.~. 0.40.20 Quartem
Quarte~
9.
Investment
8. 7.
c°o: ~. 0.06 ~04 0.02
_;
:
:
:
:
:
:
:
:
2
3
4
5
6
7
8
9
Quarters
:
:
:
:
:
:
:
:
:
:
:
10 11 12 13 14 15 16 17 18 19 2 o Quarters
1.6.
Output
Labor
Input
IA. 1.2. 1, 0,8,
g. o.o. 0.4. 0.2, 0
Quaae~ Quar~
Real Wages
0.6
0-
Real Interest
Rate
-0.5,
0.5
-1 0,4
-ili
o.~
g. 0.2
o
:
:
:
:
:
:
:
:
2
3
4
5
6
7
8
9
:
:
10
11
Quarte~
:
:
12 13
: 14
:
:
15 16
:
:
17
18
:
:
~I
~................... ~ ; ~ ~ '~ ~ ~ ;o ;~ ,'~;~ ;~ ;~ ;~ ;~ ;~ ;o~'o
19 2 0 Qua~e~
Fig. 9. Comparative dynamics to purely temporary productivity shock.
Ch. 14: ResuscitatingReal Business Cycles
967
periods, only a small fraction of the output windfall will be consumed at time 1; most of it will be invested. Thus investment rises by 8% in response to a 2% increase in output. It is interesting to note that the high volatility of investment, which Keynes ascribed to "animal spirits", arises naturally in this economy as the flip side of consumption smoothing. In the future, which begins with period 2 in Figure 9, productivity retums to its original benchmark level. The only difference relative to period zero is that the economy has accumulated some capital and only a relatively small amount since the productivity shock lasted just for one period. In line with the transitional dynamics that we discussed in Section 3 above, the optimal policy for the economy is to gradually reduce this excess capital by enjoying higher levels of consumption and leisure. The real interest rate again signals individuals to adopt these consumption and leisure paths: with a purely temporary change in productivity, the real interest rate falls in the impact period and in all future periods, making it desirable for individuals to choose consumption profiles that decline through time toward the steady-state level. The impulse response makes it clear that there will be no tendency for a period of high output and work effort to be followed by another period which has similarly high output. That is: the basic neoclassical model does not produce substantial internal propagation of temporary productivity shocks, a point which has been stressed by Cogley and Nason (1995). The effects of the one-time shock are propagated over time: the large investment in period 1 leads to high values of the capital stock that keep output above its steady-state level in the following periods. But this propagation mechanism is very weak. This weakness, together with the fact that Solow residuals display substantial persistence led most RBC studies to focus on specifications in which the persistence is inherited from the shock process. What happens with serial correlation in productivity consistent with Solow residuals? The solid line in Figure 10 depicts the effect of a serially correlated productivity shock using the estimate discussed in Section 3 above ( p = 0.979). In this case, the different series exhibit realistic persistence, which is inherited from the shock. The same mechanisms are at work as in the case of a purely temporary shock, but these effects are now drawn out over time. We now have an extended interval in which productivity is above normal. During this interval, workers respond by increasing their labor supply and most of the additional output is invested. Interestingly, high productivity is now initially associated with a high real interest rate, since the marginal product of capital schedule [At+ iD1F(kt+l,Nt+ 1) - 6] is shifted upwards by the productivity shock and by a higher level of future labor input, with capital responding only gradually via the accumulation of investment. However, later in the impulse responses, the rate of return is below its steady-state level because the capital stock has been built up while the stimulative effects of the productivity shock and labor input have dissipated. This leads consumption to initially grow through time and then subsequently to decline back toward the stationary level. Later in the impulse responses, as productivity converges slowly to its normal level, labor supply actually drops below the steady-state level as the economy enters a phase that resembles the
R.G. King and S.T. Rebelo
968 Productivity
1.2
Capital
14 1.2
1 1 0.8
i
0.8
:0.6
i
O.S 0.4
0,4
&2 0 -O.2
-0.2 1
•
26 ,
I
,0
26
1
lO{) ,
I
I
I
51
76
~00
Qual'~e~
Q.a~m
Consumpf~l
I.vestillent
5-
14
4~
O.8,
0.62-
~" 0.4 0.2
\
0
/
I
26 26
-O.2
51
IO0
[
I
76
100
Q.aae~
Quar~'l
Output
Labor Input
1.4
0;7
1.~
0.6 0.5
&8
0.4
o.e
o,3
0.4 0.2
0.2 0.1
-O.2 1
26
51 Quarters
76
=0,1 I 1
lOO
Real Wages
I 26
I 51 Quarters
I
76
I lOO
Real Interest Rate 25 - [
1.2
0.8
15
06
!:
,o
== 0.4
-0.2
1
t
I
I
1
26
51 Quart~m
76
100
k
Quarters
Fig. 10. Comparative dynamics to more persistent productivity shock. Circled lines are impulse responses filtered with the Hodrick-Prescott filter,
Ch. 14: ResuscitatingReal Business Cycles
969
transitional dynamics discussed above. Investment also eventually drops below the steady state, as the economy runs down the capital that was accumulated during the initial expansion. As with the case of the purely temporary shock discussed above, the early part of the impulse responses is dominated by the fact that the productivity shock raises the desirability of work effort, production, investment and consumption; the latter part of the impulse response function is dominated by the transitional dynamics, i.e., reduction o f capital back toward its stationary level. These impulse responses govern the autocovariances of productivity, output and other variables. With many periods of high output, there will be positive correlation between output and its past values: expansions and recessions will persist for many periods. Since the HP filter is so widely used in the real business cycle literature, it is worthwhile investigating its effects on the impulse response function, as an indication o f the effects that it has on the moments of the different variables: In Figure 10, the HPfiltered impulse responses are given by the generally lower paths that are highlighted with the 'o' symbol. One notable feature of this filtered impulse response is that there is less tendency for series to remain above or below their normal levels, i.e., filtering reduces the persistence of the various series: This effect is particularly noticeable for output and for productivity. Filtering also flattens the response of consumption and the real wage, at the same time that it makes the capital stock largely acylical.
5.2. The influence of productivity persistence In the basic RBC model~ the persistence parameter governing the productivity process has an important influence on the effects of shocks. For example, if we compare the responses of output in the two figures that we just looked at, that there is a larger initial output response in Figure 9 (where p = 0) than in Figure I0 (where p = 0.979). In particular, the additional persistence lowers the impact effect on output from about 2 when p = 0 to about 1.5 when p = 0.979. Similarly, the impact effect on work effort is smaller and the impact effect consumption is larger in Figure 10 than it is in Figure 9. When the productivity is very persistent, in the sense that the coefficient p is near unity, there are very dramatic effectS of small changes in the value of p. In this subsection, to exposit these effects, we focus on the consequences of assuming that productivity is a random walk. Economically, this involves the plausible assumption that changes in technology are permanent and there is some empirical support for the idea that productivity contains a unit root [e.g., Nelson and Plosser (1982)]. Mathematically, this amounts to setting p = 1 and implies that all shocks to productivity are expected to have an equal effect on current and expected future productivity. Impulse response analysis: Figure 11 shows that the impulse responses of all variables are substantially affected by changing the driving process parameter p from 0.979 to 1. Part of this difference involves the fact that a permanent productivity shock
R.G. King and S.T. Rebelo
970 Productivity
Capital 1.6 1.4
1,
E~:~--~
1.2
.....
0.~.
~ O.S
o.~, o.4.
O.4 o.2.
0.2 0 2
3
4
5
6
7
8
9
1 Quam~
2
13 14 15 I 6 17 18 19 20
3
4
5
6
7
8
9
10 1~ ~2 13 14 ~5 16 17 18 19 20 Q~aers
Investment
Consumption
4.~ aS
,¢
O.2 c.
: 2
1
: 3
: 4
: 5
: 6
: •
: 8
2
0.5 o.
: : : : : : : : : : : : 9 10 11 12 13 14 15 16 17 18 19 20
1
;
:
:
;
:
:
:
:
2
3
4
5
6
7
8
9
:
:
:
:
:
:
:
:
:
:
:
10 11 12 13 14 15 16 17 18 19 20 Quar~
Ouarm~
Laborlnput
Output
0.7 1.2 E 1
~
"
: 2
: 3
--°--*--*~*--°~*--°--,~.o
*
o.~ ~ o.4 o.2
0.2
c, 1
: 4
: 5
: 6
: 7
: 8
"~2~,:~:p.~
~~
~,:~ j,;~,~
,,
°;T ..................
: : : : : : : : : : : : 9 10 11 12 13 14 15 16 17 18 19 20
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 2(1 Quarle~
Quart~m
Real Wages
1.6
2~T 2O '
e. 1
:
:
:
:
:
:
:
:
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20
:
:
Quar~
:
:
:
:
:
:
:
:
:
"
~; t , , -s
1
2
3
I 4
I 5
I : : " : "~~"~ 6
7
8
9
: : : ; : ; : : : : : 10 11 12 13 t4 15 16 17 18 19 2(1 Quariers
Fig. 11. Comparative dynamics to fully permanent shock. Standard model, p = 0.979 (circles); p = 1 (stars).
Ch. 14: ResuscitatingReal Business Cycles
971
leads to an identical, proportional, long-run increase in consumption, investment and output, while the stationary shock has no long-run effect. There are also important differences in how the economy responds in the short-run depending on the value o f p . For example, in the impact period of the shock (t = 1), there is a much smaller response of labor and output to a permanent shock (the ' . ' path) than the standard shock (the ' o ' path). The date t = 1 shock is assumed to be 1% in both cases so that labor rises by 0.7% with productivity when p = 0.979 and by 0.5% when p = 1.0. Conversely, the impact effect on consumption is larger when p = 1 than it is when p = 0.979. After the impact period of the shock, the differences between the unit root case and the base case involve a combination of the differing direct effects of the shocks as well as the differing responses to permanent and temporary shocks. For example, one year after the productivity shock, the stationary model implies that 0.919 = p4 of the initial one percent impulse to productivity is (expected to be) present when p = 0.979 and the unit root model implies that there is a one percent higher productivity level. Explaining the influence of persistence: We previously used our intuition to explain the general shape of impulse response patterns, as in our discussion o f Figures 9 and 10 above. We described how the consumption and labor supply plan of the representative household are affected by shocks that affect wealth and the time path of wages. However, in the standard RBC model, there are general equilibrium effects that are subtle to think through. Consumption and labor supply decisions also depend on the time path of interest rates as well as wages. At the same time the time path of wages is influenced by labor supply decisions. To understand the channels of effect by which increased persistence affects the impulse responses, we adopt a version of Hick's celebrated demand decomposition that is suitable for dynamic models. 41 To exposit this decomposition, let us focus on the determination of the increase in consumption and leisure at the initial date t = 0. When a productivity shock occurs, the representative household understands that there is a higher amount of wealth as a result of this shock. I f wages and interest rates are unchanged, then this wealth effect would be used to finance a permanently higher level o f consumption and a permanently lower level of work effort. These effects are shown in Figure 12 for the persistent shock ( p = 0.979) and the fully permanent shock ( p = 1). There are two notable aspects of these wealth effects, which are computed in Hicksian fashion by finding the constant increments to the consumption and leisure paths that yield the same utility change as arises in the general equilibrium of the model. First, the wealth effects are the same for consumption and leisure in proportionate terms, which reflects the fact that the preference specification [u(ct,Lt) = log(&)+ Olog(Lt)] makes the wealth elasticities equal across goods. Second, the wealth effects are much larger when p = 1 as they are when p = 0.979. The representative household knows the path of wages which will arise as a result of the shock to productivity. Taking into account just the change in the wage path, we can
41 This decompositionis developed in King (1991).
R.G. King and S.T. Rebelo
972
Consumption: Interest Rate EffeCt
C o n s u m p t i o n : Wealth Effect
o.+t
o.e+ T .:~- -+.p- +:+- ~ p -+:+~ - ~:P -~:p ~: P ~::~::~':+ ++P+,~++- -.+:<+~z+~z- +,:<~+P -,++
o.~
o:1
0 m5 ~l..=l_=,l__l+l=+l~l+l__l+l+l+l__l+l__l__l+l__l__l__
+,ia
I
~+"
,/.,-+~+~ ~ . ~ .
o.2
0*15
"~-~,~,
0.1
0.0
1
1
/
26
1
t
I
76
lOO
+0.8 1 1
I
I
I
I
2+
~1
57+
100
Consumption: Wage Effect
Consumption: Total Effect
ole 0.7 ,-+•, . . , + + , . + 4 . - , - , - + , + . - , . . , . , . + , . . , . + , + , . - ,
,+,
0+ 0..I o.+ I 0.3 0.2 o.1 o 1
I 76
-•, + + , - . , + ,
0.2 I 51
I
2s
--"
0:1
I
16
I1
loo
.I6
1100
Quarle~
Leisure: Wealth Effect 0.35.
0.6
+m+m+mmmmm++zm+:mmmmm ..m++'
0.4' o,25-
=--,--,--,--,--,--,--,--,=,
0,2
+-,+--,--, -+=.-,+.+.=-+,-+,+-,-.,-~=
0
02. 0.15•
-0,2
0.1-
.0.4 -06
0.05 • o
I
I
~6
Sl
16
I
4.8
5~
10o
Leisure: Wage Effect
'
76
i~
Leisure: Total Effect
0.6
+=~,
0.4
,~,~,~,I,~,
002 o
~+'~'+
0,2 0
+
-0,2
'\
-0.4
,- + ' ~ "
+~,_,_=,=,_,_,_,_~,_,_, ,~ . + : ~ : + . . ~ ~ ~ - - A : ' + . - - . + ~ "
, / + . . ++ ' '::+- ~ -~
m,o2
+3.o+
"%i~
+°"+I/l"
f,1"
+o.+m "i"
,+"
.~"~]'+"
-0.6 -0.8 -1
"+ m m + m + + + , z - , ~ . m
,
m
,
51
o+.~am
+.14 .p/ -0.++,
m ram+ram+++ 71s
,
loo
o,+I
1
,
++
,
+
,
7+
,
1oo
Quarl~
Fig. 12. Substitution and w e a l t h effects o f persistent and p e r m a n e n t shocks: stars, p e r m a n e n t s h o c k s ; squares, p e r s i s t e n t , s h o c k s .
Ch. 14: Resuscitating Real Business Cycles
973
determine the consequences for consumption and leisure at date O, which we call the wage effect. This effect is analogous to the Hicksian effect of the wage on consumption and leisure, in that it holds utility fixed, tracing out a substitution response. However, in our general equilibrium model, the productivity shock implies that wages change in all periods, {wt}t-0. Thus, the wage effect in Figure 12 takes into account the entire change in the time path of wages, combining static and intertemporal substitutions. When p = 0.979, the representative household correctly understands that productivity will raise the path of wages at date 0 and in many future periods, but that the long-run level of the wage will be unchanged. Accordingly, the household plans to consume more at date 0. Leisure hardly changes at all because the current period is about "average"; this conclusion depends on the particular p value. However, this pattern is sharply altered when p = 1, for then the household recognizes that the current wage is below the long-run wage and leisure rises due to the wage effects that stem from a positive productivity shock 42. In the general equilibrium of our RBC model, there is one additional channel: interest rate effects that induce intertemporal substitutions of consumption and leisure. In general, these intertemporal price effects are a powerful influence, but one that is not much discussed in informal expositions of the comparative dynamics of RBC models. In particular, permanent increases in productivity lead to high real interest rates and these induce individuals to substitute away from date 0 consumption and leisure as shown in Figure 12. We are now in a position to describe why a permanent shift in productivity (arising when p = 1) has a smaller effect on labor than a persistent but ultimately temporary shock ( p = 0.979). When the shock is temporary, there is a small wealth effect that depresses labor supply but temporarily high wages and real interest rates induce individuals to work hard. When the shock is permanent, there are much larger wealth effects and the pattern of intertemporal substitution in response to wages is reversed since future wages are high relative to current wages. However, labor still rises in this case in response to productivity shocks due to very large intertemporal substitution effects of interest rates. 5.3. Why not other shocks?
We have just seen that the basic real business cycle model driven by persistent technology shocks can produce realistic business cycle variation in real quantities. Do these same patterns emerge when the economy is buffeted by other disturbances? Shocks to fiscal and monetary policy have been long standing suspects in the search
42 The wage effect on consumptionis constant acrosstime in each case because the separablemomentary utility function implies that efficient consumption plans do not depend on the amount of work. Equivalently, with this utility function, there is a general substitution effect on consumption at all dates that works much like a wealth effect.
974
R.G. King and S.T. Rebelo
for the causes o f business cycles. It is thus natural to ask what are the effects o f these shocks in the standard RBC model. Shocks to government spending cannot, by themselves, produce realistic patterns o f comovement among macroeconomic variables 43. This result stems from the fact that an increase in government expenditures (financed with lump sum taxes) gives rise to a negative wealth effect that induces consumption to fall at the same time that labor and output rise. Thus, if government spending were the only shock in the model, consumption would be countercyclica144. Changes in labor and capital income taxes have effects that are similar to productivity shocks. However, these taxes change infrequently making them poor candidates for sources o f business cycles fluctuations. Monetary policy shocks have small effects in this class o f models both in versions in which money is introduced via a cash-in-advance constraint [Cooley and Hansen (1989)] and in models that stress limited participation [Fuerst (1992), Christiano and Eichenbaum (1992b)]. Many researchers are also currently investigating the nature of business cycles in models that start with the core structure of an RBC framework but also incorporate nominal rigidities o f various forms 45. This research has not yet produced a business cycle model that performs at the same level as the RBC workhorse described in Section 4.
6. Extensions of the basic neoclassical model
Since the basic RBC model contains explicit microeconomic foundations, part o f the literature has tried to improve its predictions for individual behavior. Other researchers have sought to improve the fit between model and data, focusing on moments and sample paths o f macroeconomic time series. In this section, we discuss two strands of this research: work on labor supply and on capital utilization. 6.1. The supply of labor There is a substantial body of work that focuses on the labor supply and, more generally, on the labor market in RBC models. This research is motivated by four difficulties encountered by the basic model on micro and macro dimensions. In most
43 There is a large literature that investigates the effects of fiscal policy in an RBC context. References include Wyrme (1987), Christiano and Eichenbaum (1992a), Rotemberg and Woodford (1992), Baxter and King (1993), Braun (1994), McGrattan (1994), and Cooley and Ohanian (1997). 44 For an early discussion of this difficulty, see Barro and King (1984). There is actually some evidence that in historical periods dominated by large shocks to government expenditures consumption was countercyclical, see Correia, Neves and Rebelo (1992) and Wynne (1987). 45 Examples include Cho and Cooley (1995), Dotsey, King and Wolman (1996), and Chari, Kehoe and McGrattan (1996).
Ch. 14: ResuscitatingReal Business Cycles
975
RBC models the implied labor supply elasticity to wage changes is very large, relative to micro studies. All of the variation in aggregate hours in the model arise due to movements in hours-per-worker, while the US experience is that most of the action comes from movements of individuals in and out of employment. Labor in the model lacks a close correspondence to labor in data (see Figure 6). Finally, labor input and its average product are very highly correlated in the model, but not in the data.
6.1.1. Estimated and assumed labor supply elasticities Labor economists have long been interested in estimating the response of the labor supply to a change in the real wage rate. In the standard static model, an increase in the real wage produces a substitution effect which leads to an increase in N and C as well as a wealth effect which leads to a decline in N and an increase in C. While the effect of a wage increase on consumption is unambiguous, the effect on the labor supply involves conflicting substitution and wealth effects. In a dynamic model, the effect of a wage change is complicated by the fact that the size of the wealth effect depends on the anticipated duration of the wage change: temporary wage changes have a small wealth effect and permanent ones have a large wealth effect. In a dynamic setting, the key equation that determines the supply of labor is the requirement that the marginal utility of leisure equal its cost along the intertemporal budget constraint. Many empirical studies of dynamic labor supply [e.g., MaCurdy (1981)], suppose that the utility function has the separable form (4.2), that we introduced in our discussion o f the approximation of the RBC model in Section 5 above and for which we showed that 1-N ^ = ~-(w + ,~).
(6.1)
In this expression, the term ~~-N - is the )~-constant elasticity of labor supply. To isolate the substitution effect, labor economists often estimate a )t-constant elasticity of labor supply and we organize our discussion of labor supply issues around this elasticity. In the basic RBC model, with its assumption of log utility (77 = 1) and a steadystate fraction of time spent working o f N = 0.2, it follows that the implied labor supply elasticity is four: a one percent change in the wage rate calls forth a four percent change in hours worked if there is little wealth effect ()~ constant), as with a temporary wage change. Yet, the microeconomic evidence on variations in hours worked is sharply at odds with the elasticity built into the RBC model. While estimates of this elasticity vary across different gender and race groups, they are typically much lower than unity [e.g. Pencavel (1986)].
6.1.2. Implications of varying the aggregate labor supply elasticity To show the consequences of adopting a labor supply elasticity in line with microeconomic estimates, the third and fourth panels of Figure 8 show the effect of
R.G. King and S.T. Rebelo
976
choosing 1-N 1 which is the upper bound suggested by Pencavel's estimates, rather than ~-N = 4 as in the model of Section 4. There is an important reduction in the volatility of output in the third panel of Figure 8. However, the model loses most of its ability to produce fluctuations in labor (see the fourth panel of Figure 8). In terms of moments, the standard deviation of output falls from 1.39 to 1.16 with the smaller labor supply elasticity and the standard deviation o f labor falls from 0.67 to 0.33. =
6.1.3. Modeling the extensive margin RBC researchers have investigated ways of enhancing the aggregate labor supply response by focusing on' the extensive margin. Figure 4 shows that most fluctuations in total labor input occur as households substitute between employment and nonemployment (the extensive margin) rather than between a greater or smaller number of per capita hours worked (the intensive margin). Explaing these facts seems to require that there are fixed costs of going to work or other attributes of the technology that lead to nonconvexifies in the individual's opporttmity set. There are two strategies for incorporating the extensive margin into business cycle analysis. The first is to assume that households are heterogeneous with respect to their reservation values of work, probably due to differences in fixed costs of working such as travel time to the job. This is a conventional approach in labor economics [see, e.g., Rosen (1986)] that has been introduced into a business cycle model by Cho and Rogerson (1988) and Cho and Cooley (1994). In order to make such a model tractable, it is necessary to view individual agents as efficiently sharing the resulting employment risks 46. An alternative approach, developed by Rogerson (1988) and applied to business cycles by G.D. Hansen (1985), assumes that households are identical but agree on an efficient contract which allocates some individuals to work in each period while leaving the remaining idle. A remarkable feature of both approaches is that there is a stand-in representative agent whose preferences generally involve more intertemporal substitution in work than displayed by the underlying individual agents. For simplicity and congruence with the literature, we focus our discussion on the economies with indivisible labor and lotteries, following Rogerson (1988). Each individual in the economy has to choose between working a fixed shift of H hours and not working at all. Suppose that preferences are such that individuals would ideally like to supply a number of hours N < H. This arrangement is not possible because the choice set is not convex, it includes N = 0 (with zero labor income) and N = H (with labor income wH) but no linear combinations of these two points. In this set up agents can be made better off by the introduction of lotteries which convexify their
46 In actual economies,variationsin aggregate hours reflect changes at both the intensive and extensive margins. In a model where workers have different fixed costs of going to work, Cho and Cooley (1994) have captured both of these responses. Such a framework appears necessary to explain the differing cyclical patterns of employmentand hours-per-workerin the USA and Europe that are documented by Hansen and Wright (1992).
Ch. 14: Resuscitating Real Business Cycles
977
choice set. By entering a lottery an agent can choose to work a fraction p of his days remaining unemployed a fraction (1 - p ) of his time. Let us use the subscript 1 to denote those agents who are assigned to work by the random lottery draw and the subscript 2 to refer to the unemployed agents. The expected utility of an individual prior to the lottery draw is p u ( c l , 1 - H ) + (1 - p)u(c2, 1),
(6.2)
where p is the fraction of the population assigned to work. Feasible allocations of consumption across the employed and unemployed agents must obey p c l + (1 - p ) c 2 = c,
(6.3)
where c is per-capita consumption. Maximizing Equation (6.2) subject to condition (6.3), we find that marginal utility of consumption must be equated across types, i.e., DlU(Cl, 1 - H ) = DlU(C2, 1),
(6.4)
which is an efficient risk-sharing condition in this situation of employment lotteries as in many other contexts. The standard indivisible labor model. The typical treatment of the indivisible labor model, as in Rogerson (1988) and Hansen (1985), involves assuming separable utility. Within the general class of utility functions (3.8), this corresponds to a = 1 so that u(c, L) = log(c) + log(o(L)). In this case, efficient risk-sharing implies that the employed and unemployed share the same level of consumption (c~ = c2). Using this fact, expected utility can be written as u(c, L) = log(c) + (1 - L) ~1 log(V~ \ 02//"] + log(v2),
(6.5)
where L = 1 - p H is the average number of hours of leisure in the economy and where vl = v(1 - H ) and v2 = v(1). There are three notable features of this economy. First, even though each individual agent has a finite elasticity of labor supply, the macroeconomy acts as if it were populated by agents with a more elastic supply of labor. In particular, the standin representative agent for this economy has preferences that are linear in leisure, implying a infinite )>constant elasticity of labor supply [see Equation (6.1) with t / = 0], a feature whose consequences we explore further below. Second, contrary to conventional wisdom, this is an economy in which it is optimal to have unemployment. Finally, agents actually choose to bear uncertainty by entering the lottery arrangement instead of working a fixed number of hours in every period. It is interesting to explore further why the individual elasticity of labor supply differs from that of the economy as a whole and the consequences of this difference for the
978
R.G. King and S.T. Rebelo
determination of output and labor. The individual elasticity of labor supply answers the question "how many more hours would you work in response to a 1% raise in salary?". But the answer to this question is irrelevant because the number o f hours worked is not flexible, it is either H or zero. In other words, the intensive margin is not operative and hence its elasticity of response is irrelevant. Proceeding to the consequences for the determination of labor, the preferences o f the stand-in representative agent (6.5) imply that small changes in wages and prices can lead to very large effects on quantities. To see this, consider an isolated individual maximizing
[3tIl°g(ct)+(1-Lt)ll°gQ~ ) + log(v2) 1 t=0
Along the relevant intertemporal budget constraint, suppose that the discounted cost of a unit o f leisure is [3t)~twt. Then, for the individual to work part of the time (0 < Lt < 1) But, if this condition is in each period, it must be the case that )~twt = 1 1og(vl/V2)47. satisfied, the individual is indifferent across all sequences of leisure which imply the same level of ~ _ 0 /3t [(1 - Lt ) ~ log(vl/v2 )]: there is an infinite intertemporal elasticity of substitution in work. One implication of this labor supply behavior is that it is the demand side o f the labor market which determines the quantity o f employment and work effort in the equilibrium o f the indivisible labor model. From this perspective, firms choose the quantity o f labor that equates its marginal product to the real wage, with the position of the demand schedule being shifted by the level o f productivity and the capital stock. Since the capital stock and the multiplier )~t are endogenously determined, this labor market equilibrium picture is incomplete, but it is a useful partial equilibrium description. The indivisible labor model with more general preferences: When the indivisible labor model is generalized, as in Rogerson and Wright (1988), there are interesting new conclusions. To develop these, we use the utility function (3.8), with a ¢ 1. Efficient risk-sharing condition implies that consumption allocations must satisfy
Cl ~C2
(6.6)
According to this specification, if a > 1 there will be more consumption allocated to the employed (group 1) than to the unemployed (group 2) 48. Thus, as more individuals are allocated to the market (higherp) aggregate consumption will rise even
47 If AtW~ < 1 1og(v~/O2), our agent spends all available time at t in leisure (L = 1). If ,~twt > log(vl/V2), our agent devotes no time to leisure (L = 0). 4s This conclusion makes use of the fact that v2 = v(l) > vI = v(1 -H), which follows from the fact that v is an increasing function.
979
Ch. 14." Resuscitating Real Business Cycles
if consumption o f employed individuals and unemployed individuals stays relatively constant. Further, using this consumption rule along with the expected utility objective, there is a stand-in representative agent whose preferences are 49 1
u(c,r) =
{cl-av*(L) l - a -
1}
(6.7)
where o
v*(L)=
v1~ +
1-
v ~-) i ~ .
There are two points about this expression. First, the stand-in's utility function inherits the long-run invariance o f hours to trend changes in productivity from the underlying utility function (3.8). Second, the stand-in's utility function inherits the original utility function's properties with respect to effects of changes in leisure on the marginal utility of consumption. In particular, when a > 1, the marginal utility of consumption is decreasing in leisure. Let us again think about an isolated individual maximizing lifetime utility, ~ _ o f i t u ( c t , L t ) , but with the new momentary utility function (6.7). As with our discussion of the representative worker in Section 4 and as with our previous discussion in this section, the stand-in agent equates the marginal utility of consumption and the marginal utility o f leisure to the shadow values along the economy's resource constraint (Dlu(ct,Lt) = )~t and Dzu(ct, Lt) = ~twt = ),tAtDzF(kt,Nt)). These conditions must always hold if there is an interior optimum for work effort, i.e., 0 < Lt < 1 in each period. Taking loglinear approximations to this pair of conditions, we find - a ~ t + (1 - a)xL,
q
-
where Ic economy 50.
= ~t,
LDo* (L)
v*(r)
L
=
(6.8)
+
(6.9)
is pinned down by information on the steady state of the
49 There are two steps to this demonstration. First, one shows that efficient risk-sharing implies that expected utility is proportional to:
1 {
1-a
[ (1 a)
ct a [ pol~
( ]-o'~]0 } +(l-P)V2°'J-1 if a ¢ l ,
and then one substitutes in for leisure using L = 1 -pH. 50 That is, tc- LDo*(L) - v*(L)
) - Lw - L (wN/y) -LD2u(c,L CDlu(c,L) c N (c/y)"
R.G. King and S.T. Rebelo
980
This set of equations reveals that there is infinitely elastic labor supply even when the preference specification is not separable. That is, the pair of equations implies that 0 = ~, + a~, which is the statement that the stand-in will supply any amount of work at a particular real wage. But because preferences are nonseparable, variations in work require variations in consumption. When a > 1, in particular, workers require more consumption than nonworkers and aggregate consumption is negatively related to leisure, i.e.,
Thus, this model involves a modified form of the permanent income hypothesis, which includes the effects of changes in work effort on the marginal utility of consumption. Baxter and Jermann (1999) have argued that this type of preference nonseparability will arise in any model with household production; they have also stressed that this specification can make consumption more cyclically volatile. 6.2. Capacity utilization
In the standard version of the neoclassical model, there is a dramatic contrast between the short run and long run elasticities of capital supply. The short run elasticity of capital supply is zero: there is no way for the economy to increase the capital stock inherited from the previous period. In contrast, the long run elasticity of capital supply is infinity: there is only one real interest rate consistent with the steady state o f the economy. This difference between short run and long run elasticities stems from the assumption that capital services are proportional to the stock of capital. This is an assumption we make every time we write a production function as Y = F ( K , N ) . While this assumption may be suitable for some purposes, it is clearly problematic for business cycle analysis. The third panel of Figure 3 suggests that capacity utilization displays pronounced cyclical variability. The fact that equipment and machinery are used more intensively in booms than in recessions is corroborated by the procyclical character of electricity consumption in manufacturing industries [Burnside, Eichenbaum and Rebelo (1995)] and by the fact that expansions are accompanied by the use of two and three shifts in manufacturing industries [Shapiro (1993)]. All this evidence suggests that the flow of capital services is high in expansions. In contrast, recessions are times when capital tends to lie idle, thus producing a small service flow. Several authors have extended the basic RBC model to incorporate variable capital utilization. Kydland and Prescott (1988) showed that introducing time-varying capital utilization enhanced the amplification capability o f their 1982 model. Greenwood, Hercowitz and Huffman (1988) introduced variable utilization in a model that features
Ch. 14: Resuscitating Real Business Cycles
981
shocks to the productivity o f new investment goods 51. Finn (1991) used a similar framework to study the interaction between capital utilization and energy costs. In her model, more intensive capital use accelerates the depreciation o f capital and raises marginal electricity consumption. Burnside and Eichenbaum (1996) explored a model with both capital utilization and labor hoarding. They showed that these two features significantly enhance the ability of the model to propagate shocks through time 52. Modeling variable utilization. Most studies o f variable utilization assume that depreciation is an increasing function of the utilization rate 53. The benefits from variable capital utilization can be incorporated into the production function as follows: Yt = AtF(ztKt,NtXt) = At(ztKt) l a(NtXt)a. where zt denotes the utilization rate 54. The costs o f variable capital utilization are imbedded in the following law o f motion for the capital stock: K t + 1 : ~ + [1 - b ( z , ) ] K t ,
where 6(.) is a convex, increasing function o f the utilization rate 55. To determine its optimal rate o f utilization, a firm maximizes its profits holding fixed its future capital stock. The marginal benefit of a higher utilization rate is additional output (AtDiF(ztKt, NtXt)Kt) and the marginal cost is higher (replacement) investment (dIt = Db(zt)Kt). Equating these and using the Cobb-Douglas production function, we find that efficient utilization implies (1 - a)At(zt)-a(Kt)~-a(NtXt) a = Dr(zt)Kt,
(6.10)
which is the requirement that the marginal benefit in terms o f additional output produced be equated to the marginal cost in terms o f additional units o f capital being worn out. The consequences o f variable utilization. To explore how efficient variation in the utilization rate affects the linkages in the economy, we linearize Equation (6.10) to
51 These shocks tend to make consumption and investment move in opposite directions. Introducing capital utilization eliminates this counterfactual correlation between consumption and investment. 52 Their model is also capable of producing a humped shape response of investment to technology shocks - a feature that is common in empirical impulse response functions estimated using VAR techniques. 53 An exception is Kydland and Prescott (1988). 54 For simplicity, we use the Cobb-Douglas form throughout our discussion of capital utilization. 55 Thus, it has a positive first derivative Dr(.) and a positive second derivative De6(.).
R.G. King and S.T. Rebelo
982
obtain an expression for ~t and substitute this result into the linearized production function: 33t = 3t + a-~t + (1 - a)(]c~ + ~t) = A t + (1 - a)/ct + aNt + ~1 - a ( A t - a ] c t + a N t )
(6.11)
In this expression ~ represents the elasticity o f Db(zt), which is positive if there is increasing marginal depreciation cost of higher utilization 56. The model without utilization occurs as a special case in which ~ is driven to infinity, since in that case the quantity o f capital services does not respond to changes in the marginal product of these services. At the other extreme, as ~ is driven toward zero, the response of output becomes )t = FAt 1 ^ + Nt. ^ For this reason, time-varying capital utilization is sometimes described as leading to a short-run production fimction that is nearly linear in labor. Variable utilization makes the marginal product o f labor - the real wage rate - less responsive to changes in labor input. The comparable log-linear expression for the real wage rate is
~t:(f:,-Nt):3t+(1-a)[ct+(a-1)Nt+
1-a
(At-alct+aNt)
(6.12)
and, as ~ is driven toward zero, the response o f the real wage approaches wt = FAt.1 ^ In other words, the labor demand schedule drawn in (w,N) space "flattens" as depreciation becomes less costly on the margin (~ falls). When ~ is driven to zero, the labor demand curve becomes completely flat.
7. Remeasuring productivity shocks We have seen that productivity shocks are an essential ingredient of real business cycle models. In the absence of measurement error in labor and capital services, these shocks coincide with the Solow residual. Prescott (1986) used the Solow residual as a measure of technology shocks to conclude that these shocks "account for more than half the fluctuations in the postwar period with a best point estimate near 75%". There are three reasons to distrust the standard Solow residual as a measure of technology shocks. First, Hall (1988) has shown that the Solow residual can be forecasted using variables such as military spending, which are unlikely to cause changes in total factor productivity. Similarly, Evans (1992) showed that lagged values o f various monetary aggregates also help forecast the Solow residual. Second, the conventional Solow residual implies probabilities of technological regress that are implausibly large. Burnside, Eiehenbaum and Rebelo (1996) estimate that the
56 It can be shown that ~ = z(D26)/D6 > O.
Ch. 14: ResuscitatingReal Business Cycles
983
probability o f technological regress associated with the conventional Solow residual is 37% in US manufacturing. Finally, cyclical variations in labor effort ("labor hoarding") and capital utilization can significantly contaminate the Solow residual. There are two strategies for dealing with these extra, hard-to-measure sources o f factor variation. The first strategy is to use an observable indicator to proxy for the unobserved margin. For example, since individuals working harder may have more accidents in an industrial setting, the frequency o f worker accidents could be used as an indicator o f unobserved effort 57. More commonly, electricity consumption in manufacturing industries is taken as an indicator o f capacity utilization. The second strategy is to use implications o f the model to solve out for the unobserved factor variation and then to examine other implications o f the m o d e l economy. We discuss application o f each o f these strategies to measuring capacity utilization in the remainder o f this section. Capital utilization proxies: Burnside, Eichenbaum and Rebelo (1996) employ electricity use as a proxy for capacity utilization. In particular, assuming that the utilization rate is proportional to electricity utilization, they can use the Solow decomposition in modified form, log SR[ = log Yt - a log Art - (1 - a)[log Kt + log(z[)],
(7.1)
where log(z/) is the log o f electricity use. They find that when electricity use is employed as a proxy for capital services the character o f the Solow residual associated with the manufacturing sector changes dramatically: (i) there is a 70% drop in the volatility o f the growth rate o f productivity shocks relative to output, implying that a successful model must display much stronger amplification than the basic RBC model; (ii) the hypothesis that the growth rate o f productivity is uncorrelated with the growth rate o f output cannot be rejected; and (iii) the probability o f technological regress assumes much more plausible values, dropping to 10% in quarterly data and to 0% in annual data. These corrections to the Solow residual significantly reduce the fraction o f output variability that can be explained as emanating from shocks to technology 58. Using the model to measure capacity utilization: A n alternative strategy is to use the model's implications for efficient utilization to solve for the unobserved
57 Several variants of this proxy strategy have been used to shed indirect light on the presence of labor hoarding. Bils and Cho (1994) use time and motion studies to document the presence of variability in effort. Shea (1992) uses data on on-the-job accidents to construct an indirect measure of labor hoarding. Burnside, Eichenbaum and Rebelo (1993), Sbordone (1997), and Basu and Kimball (1997) postulated a model of labor hoarding that they proceeded to use to purge the Solow residual of variations in the level of effort. s8 Aiyagari (1994) proposed a method to compute a lower bound on the contribution of technology shocks to output volatility. His procedure relies on knowledge of two moments in the data: the variability of hours relative to the variability of output and the correlation between hours worked and labor productivity (which is essentially zero in the data). Unfortunately, his method is not robust to the presence of labor hoarding or capacity utilization.
984
R.G. King and S.T. Rebelo
utilization decision, i.e., zt. In essence, this empirical strategy corresponds to our theoretical method in the previous section, when we solved out for zt in order to derive Equation (6.11), which describe how output responds to changes in labor, capital and productivity when utilization is efficiently varied. One possibility would be to exactly follow this strategy, substituting observed variations in labor and capital into Equation (6.11) to compute the productivity residual, but we use a more "reduced form" approach that we describe more fully in the next section.
8. Business cycles in a high substitution economy Motivated by the vanishing productivity shock, we now construct an economy in which small variations in productivity can have large effects on macroeconomic activity, i.e., an RBC model in which there is substantial amplification of shocks. There are two central ingredients to this model. First, as in Section 6.1, we assume that there is indivisible labor. This makes the supply o f aggregate hours strongly responsive to changes in wages and intertemporal prices. Second, as in Section 6.2, we assume that there is variable capacity utilization. This makes the supply o f capital services strongly responsive to changes in the level o f aggregate hours. Taken together, these ingredients mean that the economy has high substitution in all factors o f production. Further, the Solow residual is a very poor measure o f technology shocks in our model economy. However, the very same structural feature that makes the Solow residual a bad measure o f technology shocks (unmeasured variation in capital services) also provides a powerful amplification mechanism that allows our model to account for the observed output variation with much smaller shocks. Finally, our model provides a means o f implicitly measuring the smaller shocks that occur, which can be viewed as a variant o f Solow's approach 59. 8.1. Specification and calibration
The specification and calibration o f the model follows the same general approach that we used in Section 4, but with some relatively minor modifications. Restrictions on the steady state: First, we know that the production side o f the basic model determines most aspects o f the steady state and that continues to be true with variable capital utilization. The efficiency condition for utilization in the steady state determines a steady-state utilization rate such that r + b(z) = D6(z), with the remainder o f the steady-state relative prices and great ratios then adjusted to reflect the fact that the flow o f capital services is z K rather than K.
59 The approach was suggested by Mario Crucini in unpublished research many years ago, so perhaps we should call these "Crucini residuals". Another application is contained in Burnside, Eichenbaum and Rebelo's (1993) study of unobserved effort (labor hoarding). Ingram, Kocherlakota and Savin (1997) use a similar procedure to infer information on observed shocks to the home production sector.
Ch. 14: Resuscitating Real Business Cycles
985
Table 4 Calibration of high substitution economy ~r
b
y
a
~
~
P
(Ye
3
0.984
1.004
0.667
0.025
0.1
0.9892
0.0012
Second, since we are assuming an indivisible labor model, there is a different calibration of the preference side of the model. Evidence from asset pricing studies suggests that a is larger than the unit value used in the basic model; this means that our model will have the realistic implication that more consumption is allocated to working individuals than to nonworking individuals. Drawing on Kocherlakota's (1996) review, we use o = 3. We assume that 60% of the population is employed in the steady state and that employed individuals work 40 hours. This implies that an average individual's hours are N = 0.214, i.e., 24 hours out of a weekly 112 hours o f nonsleeping time. Then, this information (including the assumed value of a ) determines the ratio v(1)/v(1 - H ) which dictates the ratio of consumptions o f the two types o f individuals. It turns out that the ratio CJCe is 3.31 so that workers have substantially higher consumption than nonworkers. Table 4 summarizes our parameter assumptions. Unless otherwise discussed, the parameters are the same as in Table 2. Measuring technology shocks: We use the implications of our model as discussed in the last section to produce a series on technology shocks which is consistent with unobserved variation in capacity utilization 6°. In particular, we start by assuming a value for the persistence and volatility of technology shocks and solve the model. The decision rule for output can be written as
Yt = : ykkt + ZyAA,. Using this decision rule together.with data for output and capital (which we logged and linearly detrended), we can compute an initial guess about the time series for technology shocks 61: 1
_ ,ryk
60 There is no unique way of computing this shock process, but rather any of the model's decision rules could be used in this way or these rules could be combined with other relationships in the model. For example, one could exploit the decision rule for utilization as in Burnside, Eichenbaum and Rebelo's (1993) analysis of labor hoarding, ~t = JVyklct+ ~yA~lt, and combine this with the modified Solow decomposition(7.1). This alternativemethod would produce a different shock process, which lead to broadly similar, but somewhat less dramatic results. The difference between these two productivity measures lies in whether labor in Equation (7.1) is taken from the data or from the model. 61 We should not use the empirical capital stock series since these are flawed in the eyes of the model: they are computed assuming constant rates of depreciation. This can be circumventedby using a second decision rule to compute the "true" capital stock series. In practice this has little impact on the results.
986
R.G. King and S.T. Rebelo
This guess is not exactly fight because the serial correlation coefficient (p) for this zit series need not match that used to solve the model and to construct the Jr coefficients. Therefore, once we obtain a time series for zit, we compute its persistence (p) and use this new value to solve the model again. Using the new decision rule, we recompute ~it and once again its calculate its persistence. We continue this process until the new and old estimates for the serial correlation of~it are the same. This iterative procedure yielded an estimate of 0.9892 for the first-order serial correlation and 0.0012 for the standard deviation of the et. 8.2. Simulating the high substitution economy With a series of productivity shocks in hand, we simulated our model economy's response to these shocks just as we previously did for the standard RBC model. Figure 13 displays the results, which we think are dramatic. Panel 1 shows the model and actual paths for output, which are virtually identical. In part, this is an artifact of our procedure for constructing the technology shock, which is a weighted average of output and capital as we just discussed. For this reason, we think that the performance of the model should not be evaluated along this dimension. Instead, the model has to be judged by its predictions for other variables of interest. The remaining panels of Figure 13 display the model's implications for total hours worked, consumption and investment, with all of these series detrended with the HP filter. The correlation between the empirical and the simulated series is 0.89 for labor, 0.74 for consumption and 0.79 for investment! This remarkable correspondence leads to three sets of questions, similar to those which arose in the analysis of the standard RBC model. First, how do small variations in productivity have such dramatic effects? Second, what are the properties of the technology shocks? Third, how sensitive are the results? 8.3. How does the high substitution economy work? The high substitution economy contains four mechanisms that substantially amplify productivity shocks and lead to strong comovements of output, labor, consumption and investment. To begin, variable capacity utilization makes output respond more elastically to productivity shocks in Equation (6.11), which we repeat here for the reader's convenience:
Since utilization of capital increases when there is a positive productivity shock, there is a direct effect which is part of the amplification mechanism. In the limiting case of = 0 for example, a labor's share of a = 2 implies that the productivity shock raises output by ~1 or 3 times its direct effect. We use a value of ~ = 0.1 in constructing our simulations, so that the effect with a = 2 is 1 + ~l-a = 1+°33 ~_~ = 1.43. Thus, variable utilization helps create amplification, but only in a modest manner.
Ch. 14." Resuscitating Real Business Cycles
987
6
Output
8
51
56
61
66
71
76
81
86
91
96
Date
Input
Labor
4.
2, 0 4-2,
#.
-4.
"
v
--
........
~
Data
-6, I
I
I
I
I
I
51
-8
I
I
I
[
56
I
I
I
I
61
I
I
I
[
66
[
]
[
71
I
I
;
76
;
;
;
;
8I
;
;
;
;
86
;
:
:
:
:
91
96
Date
15
Investment
Mode[
10 5
~- -5 -10 -15
l
51
56
61
66
76
71
l
:
:
:
81
!
!
!
l
l
86
:
l
l
91
:
l
I
l
96
-20
6. 5. 4. 3. 2.
Consumption ~..~
Model
--,-~-- - Data
~. ~o
-1. -2. -3.
51
56
61
66
71
76
81
86
91
96
Date
Fig. 13. Capacity utilization model: simulated business cycles. Sample period is 1947:2-1996:4. All variables are detrended using the Hodrick-Prescott filter.
R.G. King and S.T. Rebelo
988
Relative to the standard RBC model that we discussed in Section 4, most of the increased amplification in the model of this section comes from greater elasticity of the labor demand and labor supply schedules. Highly elastic labor supply is due to indivisible labor: work effort is highly responsive to small changes in its rewards. In fact, we have previously argued that it is the demand side which approximately determines this quantity in indivisible labor economies. Variable capacity utilization makes the labor demand more elastic. As discussed above, labor demand is implicit in the equation:
~t = ( ) t _ ~ t ) = ~ t + ( l _ a ) ~ + ( a _
1)~t + 1 - a
(At-aict+aNt)
In the model without variable utilization (or with ~ = c~), a one percent increase in labor quantity causes the real wage to fall by 0.333 percent when a = 2, since the coefficient on Nt is (a - 1). At the other extreme, as ~ is driven toward zero, the response of the real wage to a productivity shock approaches ~t = FAt, 1 ^ i.e., the labor demand schedule becomes more elastic until it is completely elastic in the limit. With variable utilization, the combined coefficient on labor is (a - 1) + ~1-a a . Using a = ~ and ~ = 0.10, as in our simulations, we find that the combined coefficient is (0.67 - 1) + 0.33 n 67 = -0.043: a one percent change in labor requires a decline in the 0.77 .... wage that is an order of magnitude smaller than in the standard model. With indivisible labor and variable utilization, a small productivity shock shifts up labor demand and calls forth a large increase in labor supply. In order to determine the exact size o f this change, however, it is essential that we simultaneously determine the path of capital (kt) and the multiplier ()~t). The final structural feature that is important for the simulated time series is the nonseparable form of the utility function. In the standard Hansen-Rogerson case of log utility, most of the model's change in output goes into investment rather than consumption. However, since the efficient plan calls for the allocation of more consumption to employed individuals when ~r > 1, the high substitution economy displayed in Figure 13 involves more volatile consumption that corresponds closer to the data. We return to a discussion of this feature in the context of impulse responses later in this section.
8.4. What are the properties of the shocks? Is this remarkable coherence between data and model achieved by using an empirically unpalatable productivity shock as a driving force? Figure 14 answers this question. The first panel depicts the level of the productivity, which involves a combination of the deterministic trend and stochastic component (i.e., AtXta). It increases through time smoothly in the manner that many economists believe is appropriate for the level of technology. The second panel of Figure 14 shows the growth rate of productivity in our economy. This graph shows that the average rate of technical progress is large
989
Ch. 14." Resuscitating Real Business Cycles A. Model Productivity Level 8.28.187.97.8-
~
7.7-
3 7.67.5. j ...........- , -
7.47.3-
l
7.2
l
l
l
l
:
~
51
:
:
:
:
I
56
l
l
l
l
61
l
l
l
l
66
l
l
I
l
l
71
l
l
l
l
l
76
l
l
l
l
81
l
l
l
l
l
86
91
99
Da~
B. Model Productivity Growth
0.9 0.8 0.7 0.6
~
0.5 0.4
~
9.3
.
9.2 9.1 0 -0.1
I
I
I 51
I
I
I 56
I
I
I
I 61
I
I
I
I 66
I
I
I
I
I
I
71
I 76
I
I
I
I 81
I
I
I 86
I
I
I
I 91
I
I
I
I 96
Date
C. Model Productivity (-) and Empirical Solow Residual (..)
4 3 2 1
i,
:L,V
. . . .
;'..
•
,
;'~
'
".
,
~
:~',
.
.
.
.
'
-1. -2.
-3, -4
I
I
I 51
I
I
I
I 56
I
I
I
I 61
I
I
I
I 66
I
I
I
I 71
I
I
I
I 76
I
I
I
I 81
I
I
I 86
I
I
I 91
I
I
I
I 96
Date
Fig. 14. Capacity utilization model: productivityand the Solow residual. enough that a measured technological regress occurs only very rarely, given the low variability of technology shocks. The third panel of Figure 14 graphs business cycle variation in the conventional Solow residual and the productivity shock used in our model, using the HP filter to create these components. Figure 14 illustrates that it
990
R.G. King and S. T. Rebelo
Table 5 Sensitivity analysis to different ~ values value
ec 1 l 1 I 1
7 11o
Standard deviations I N A
Y
c
1.36 1.39 1.40 1.40 1.41 1.41 1.42
1.01 0.94 0.92 0.91 0.91 0.90 0.89
2.62 2.86 2.94 2.99 3.05 3.09 3.15
0.90 1.07 1.13 1.16 1.20 1.23 1.26
0.79 0.45 0.34 0.28 0.22 0.19 0.15
e
Persistence parameter (p)
Likelihood of technical regress
0.0061 0.0034 0.0026 0.0021 0.0017 0.0014 0.0012
0.9783 0.9798 0.9822 0.9841 0.9866 0.9880 0.9892
0.1859 0.1106 0.0653 0.0352 0.0101 0.0050 0.0050
is possible to explain the variability o f US macroeconomic activity with productivity shocks that are much smaller than those conventionally used in the literature. 8.5. H o w sensitive are the results?
We next discuss the sensitivity o f our results to the choice of parameters and to the measurement o f output. Sensitivity to parameterization. The value chosen for the parameter ~ is a key ingredient in the results. This is not surprising since we know that when ~ equals infinity the model with capital utilization reduces essentially to the standard model. Table 5 shows how some key model statistics change with different values for ~. For every value of ~ we used the iterative process described above to ensure that the stochastic process assumed for A~ is in fact consistent with the properties o f the technology shock implied by the model. In every case we report the persistence of the shock ( p ) and the standard deviation of the innovation (e) as well as the implied probability o f technological regress. Low probabilities o f technological regress can be 1 obtained for values o f ~ that are lower than 3" As an alternative check on the sensitivity o f the model to ~, Figure 15 depicts the impulse response for this model for three values o f ~: oe, I and 1 . To simplify the comparison between these impulse responses we did not adjust the stochastic process for the technology shock. All three responses were computed with the same standard deviation o f innovation (a~, = 0.0072) and same persistence ( p = 0.979). The three impulse response functions depicted in this figure have similar dynamic properties, but vary mostly in the degree of amplification. The solid line is a fixed capital utilization model (~ = oc) like the basic RBC model of Section 4, but with indivisible labor. In this model, a productivity shock has a larger effect on output than in the standard RBC model: when there is a one percent productivity shock, output rises by just less than two percent on impact with fixed utilization (~ = ec). However, the
Resuscitating Real Business Cycles
Ch. 14:
991
Productivity
1.2
Capital
5. 45,
1.
4.
0.8,
.
3.5,
. . . .
i
~0.6. 0,4.
•,.,="
............................
3. 2.S.
2. 1.5. =
1,
O.2.
.~°..1
,. ................................................
O.5', ', : 2 3 4
o.
: 5
: 6
: 7
: 8
: 9
: : : : : '. : : : : : 10 11 12 13 14 15 16 17 18 19 2O
0 2
3
4
5
6
7
8
9
Ouarte~
~
=~
10 11 12 13 14 15 16 17 18 19 20 Quarters
Consumption
35
Investment
7 6
I
• ~2ot
•~
•
•
•
•
.......
o, 1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20
: 1
2
'. 3
'. 4
'. 5
'. 6
'. 7
'. 8
'. ', '. '. '. ', : ', ', ', : 10 11 12 13 14 15 16 17 18 19 20
'. 9
Quarters
14 T
Quarters
Output
14 112 •
/
~8
1
2
3
4
5
6
7
8
9
10 1I
12 13 ~4 15 16 17 18 19 20
Labor
............. . 1
2
3
4
5
6
7
8
9
Quarters
1'i I
i
..
:.., ;~2.'-.~,:-=. =--:~'-
10 11 12 13 14 15 16 17 18 19 20 Quartg~
iit
Real Wages
.
Input
•
'' -;"~T~- '-- '-J--:~';~:'--;
...
n,.r.,.a,o
0.6 .............. 0.4 0.2 0
. . . . . . . . . . . . . . . . . . 1
2
3
4
5
6
7
8
9
I
10 11 12 13 14 15 16 17 18 19 20 Quartar~
1
2
3
4
5
6
7
8
g
10 11 12 13 1,4 15 16 ~7 18 19 20 Quarters
Fig. 15. Sensitivity analysis to alternative utilization costs (~): solid line, ~ = e~; diamonds, ~ = ½; squares, ~ = ~ .
R.G. King and S.T. Rebelo
992
increase in amplification is small relative to what happens when indivisible labor and capacity utilization are introduced simultaneously. A one percent productivity shock has an impact effect on output o f 8 percent when ~ = 0.2 and o f 13 percent when = 0.1. From various experiments with this model economy, it is clear that values of ~ less than one are important to obtain substantial amplification. For example, if there is a value of ~ = 1 then there continues to be on average a regress in the level of productivity every ten quarters (see Table 5 above). It is important that econometric evidence be produced on the cost o f varying capital utilization, so as to determine the extent to which this high substitution economy is realistic 62. One specific feature o f the impulse response in Figure 15 is worth some additional discussion. In all o f the cases, the real interest rate increases in response to a positive productivity shock, at least for the first twenty quarters shown in the graph. In all cases, the level o f consumption broadly resembles the level o f output and the growth rate of consumption is negative, even though the real interest rate is high by comparison to its steady-state level. This behavior o f consumption reflects the fact that aggregate consumption is the sum o f consumptions by individuals that are working and those who are not. Since working agents have more consumption, an increase in the fraction o f individuals working makes aggregate consumption rise and fall with aggregate employment 63. Sensitivity to the measurement o f output. We have seen that variable utilization and indivisible labor produce an economy in which (i) small productivity shocks have large effects on output; (ii) the standard Solow residual is substantially mismeasured; and (iii) labor and output move together on an approximately one-for-one basis. In this economy, however, there is an important sense in which output is mismeasured. There is a standard line o f intuition which suggests that "intermediate" activities such as utilization should not be too important for economic activity and, in this case, suggests that the large effects o f productivity on output and the strong eomovement o f output and labor are simply artifacts of output mismeasurement. To explore these ideas, output net o f depreciation can be defined as Ot = Yt - 6(zt)kt = AtF(ztkt, Nt) - 6(zt)k~
(8.1)
and this expression can be used to make four important points. First, output is also mismeasured in the standard neoclassical model, i.e., even in the absence of a variable depreciation rate. Second, with efficient utilization, changes in net output are dot = F(ztkt, Nt) dA, + AtO2F(ztkt, Nt) dN, +AtDlF(ztkt, Nt)(kt dzt + zt dkt) - D6(zt) ]~tdzt --
(~(Zt)
dkt
= F(ztkt, Aft) dAt + AtO2F(ztkt, Nt) dNt + AtOlF(ztkt, Nt) zt dkt - 6(zt) dkt, 62 Basu and Kimball (1997) provide an estimate of a parameter that is essentially our ~. Their point estimate is about unity, but the parameter is very imprecisely estimated. 63 Baxter and Jermann (1999) stress that equilibrittm models with nonseparable preferences can generate apparent excess sensitivity of consumption to income, working in a model where labor supply variation is on the intensive rather than extensive margin.
Ch. 14: Resuscitating Real Business Cycles
993
where the latter equality follows from AtD2F(ztkt, Nt) kt dzt - D6(zt) ktdzt = 0 when utilization is efficient. Thus, there is a sense in which the standard intuition is correct because net output does not respond to utilization. Third, near the steady state, the Solow decomposition for net output is (8.2)
where m = ~ = [1 @]-l. This modification takes into account the fact that the net production function :is more labor intensive and the fact that productivity shocks affect gross output but not depreciation. Thus, for example, if depreciation investment is 10% of output, then m = 1.11. Thus, if output is measured as net of depreciationindependent of whether capacity utilization affects depreciation - then this will tend to strengthen the magnitude o f labor's effect on output. Fourth, most importantly for our purposes, the net production function qSt = AtF(Nt, ztkt) - 6(zt)kt has the same marginal product schedule for labor, A t D I F ( N t , ztkt) as does the standard production function. Thus, our analysis of the "labor demand" consequences of efficient utilization are unaffected by whether depreciation costs are deducted from output or whether they are not. Returning to Equations (6.11) and (6.12), we can thus see that a "net output" measurement requires that we replace Equation (6.12) with the modified growth accounting expression (8.2), but that we need not change the labor demand schedule (6.11) at all. Further, it is a highly elastic labor demand that is the key force behind the great amplification present in our high substitution economy. -
9. Conclusions
This chapter provides a perspective on developments in the literature on real business cycles over the last decade. We discussed the structure of these models, their successes and their deficiencies. We also argued that three main criticisms levied against first-generation real business cycle models have been largely overcome. First, the performance of the basic RBC model has proved to be remarkably resilient to alternative parameterizations, including versions in which the elasticity of labor supply is small at an individual level but large in the aggregate economy. Second, the model has been usefully extended to accommodate more realistic price behavior. Finally, we showed by example that there are RBC models which can provide enough amplification so that the underlying technology shocks can be small and involve a low probability of technological regress 64. Our example made clear that major
64 Just as this first round of problems is set to rest, new challenges arise for the RBC model regarding the comovement between productivity and economic activity. In a recent paper, Gali (1996) argues, using VAR techniques, that technology shocks actually reduce input usage in the aggregate economy.
994
R.G. King and S.T. Rebelo
amplification o f productivity shocks requires highly elastic labor supply and readily variable capital utilization 65. Although we have concentrated on the one sector neoclassical model, which has been the central laboratory for most work on real business cycles, the next stages o f RBC research will likely use richer frameworks, as we discuss next. However, we believe that the exploration o f these richer frameworks will require consideration of the structural features that we have stressed in this chapter. One exciting research direction is the exploration o f models with multiple sectors, i.e., a long overdue continuation o f the trail scouted by Long and Plosser (1983). Interesting recent work on these models retains most o f the assumptions on preferences and production opportunities commonly incorporated in the one-sector RBC model [Horvath (1997), Dupor (1998)]. The one-to-one movement between hours and output observed in aggregate data also holds at a sectoral level. To us, this suggests the importance o f introducing variable capacity utilization into sectoral production structures. Another promising direction is work on models with heterogeneous agents [Krusell and Smith (1998), den Haan (1993)]. This work seems particularly important for enriching labor market dynamics and modeling unemployment 66. Fleshing out labor market dynamics is important on its own terms. But this work may also provide us with an alternative way o f obtaining a highly elastic aggregate labor supply which appears necessary for RBC modeling. A third interesting research direction seeks to tmderstand the industry dynamics that seem intimately related to the business cycle [Hopenhayn and Rogerson (1993), J.R. Campbell (1998)]. Finally, there are many aspects o f microeconomic activity in addition to employment in which discrete choice seems very important. It has frequently been suggested, for example, that the volatility o f investment is related to the fact that much o f firm investment is lumpy in character label and Eberly (1995), Caballero and Engel (1994)]. The incorporation o f lumpy investment decisions into the RBC model and its implications for aggregate dynamics is an exciting new direction o f research on which some initial progress has been made [Veracierto (1996), Thomas (1997)]. The interaction o f lumpy investment with costly capacity utilization seems a particular important topic o f investigation. All four of
This finding receives indirect support from two sources that do not rely on the VAR methodology: Burnside, Eichenbaum and Rebelo (1996) document that a sectoral capital-utilization adjusted measure of technology shocks is essentially tmcorrelated with production in 2-digit SIC manufacturing industries. Basu, Fernald and Kimball (1997) show that, for this same set of industries, input usage is negatively correlated with technology shocks. One interpretation of these facts is that they reflect the presence of nominal rigidities that keep nominal aggregate demand fixed and lead inputs to contract in response to a productivity increase [Gali (1996)]. An alternative flexible-price explanation for these same facts involves a multisector model in which goods are complements so that a technology shock to an individual sector does not necessarily warrant an expansion of input usage in that sector. 65 All interesting and open question is whether these same mechanisms can amplify other shocks besides productivity shocks sufficiently that these can produce realistic business cycles. 66 Some recent examples include Andolfatto (1996), Merz (1995), Gomes, Greenwood and Rebelo (1997) and den Haan, Ramey and Watson (1997).
Ch. 14: Resuscitating Real Business Cycles
995
these lines o f inquiry involve enriching the RBC model in ways that seemed virtually impossible a decade ago. While we think that economists may have prematurely dismissed the idea that the business cycle m a y originate from real causes, we also think that m a n y o f the lessons drawn from current and future RBC research are likely to be independent o f the main source o f business fluctuations. This is one important reason why the RBC literature has been a positive technology shock to macroeconomics.
Appendix A. Dynamic theory This Appendix discusses some theoretical aspects that underlie the construction o f Real Business Cycle Models.
A. 1. Assumptions on preferences and technology The specific forms o f the momentary utility and production functions used in RBC models may seen arbitrary, but they are typically chosen on the basis o f economic theory and empirical observation. Preferences: In order for preferences to be consistent with steady-state growth in a deterministic version o f the basic RBC model they must have two properties: (i) households must be willing to expand their consumption at a constant rate when the real interest rate is constant; and (ii) it must be optimal for households to supply a constant number o f hours when the real interest rate is constant and the real wage rate grows at a constant rate. King, Plosser and Rebelo [1988a] study the admissible utility specifications when utility depends on "pure leisure" (L)67. These two requirements imply that momentary utility must have the form
j_d[Cv(L)]1-G
l l-or
if
o > 0,
if
o = 1.
cr ~e 1, (A.1)
u(C,L) =
log(C) + log v(L)
It is easy to verify two properties o f these specifications. First, i f agents have a budget constraint for goods and leisure o f the form e + wL <. w, where w is the real wage rate and 1 is the time endowment, then there is invariance o f L to the level o f w 68.
67 Another possibility is that utility depends on leisure in efficiency units, i.e., on leisure augmented by technological progress (L~Xt). In this case it is sufficient to assume that u(C, LX) is homogeneous, of class C2, and concave. The dependency of utility on leisure measured in efficiency units can be justified by introducing home production into the model. See Greenwood, Rogerson and Wright (1995, pp. 161-162) for a discussion. 68 This invariance extends to a setting where the budget constraint includes nonwage income which grows at the same rate as the real wage.
R.G. King and S.T. Rebelo
996
Second, u s i n g U H o p i t a l ' s rule, the s e c o n d case is the limiting expression o f the first as a --+ 1. We require that utility be sufficiently differentiable as well as c o n c a v e and increasing in c o n s u m p t i o n and leisure; this implies restrictions that m u s t be p l a c e d on v w h i c h d e p e n d on the value o f a 69. Differentiability allows us to characterize efficient allocations u s i n g variational methods. W h e n c o m b i n e d w i t h convexity o f the constraint set, c o n c a v i t y o f preferences insures that the s o l u t i o n to the planner's p r o b l e m is unique, w h e n e v e r lifetime utility ( U ) is finite 7°. Since, as we will see shortly, the c o m p e t i t i v e e q u i l i b r i u m under rational expectations c o i n c i d e s with the solution to the planner's p r o b l e m , this guarantees that the c o m p e t i t i v e equilibrium is also unique. T e c h n o l o g y : The p r o d u c t i o n function F ( . ) is also t w i c e continuously differentiable, concave and h o m o g e n e o u s o f degree one. Constant returns to scale implies that the n u m b e r o f firms in the competitive e q u i l i b r i u m is undetermined. W i t h increasing returns to scale a competitive e q u i l i b r i u m does not exist because it w o u l d entail negative profits for all firms 71. In contrast, with d e c r e a s i n g returns to scale we w o u l d see an infinite n u m b e r o f infinitesimal firms w h o s e total output w o u l d be infinite 72. Alternatively, firms w o u l d earn e c o n o m i c profits if, for some reason, entry were limited. We a s s u m e that F ( . ) satisfies the f o l l o w i n g l i m i t i n g conditions, often referred to as Inada conditions 73: lim DIF(K,N)
K --~ c,o
= 0,
lim DtF(K,N)
K-+O
= cxz.
These c o n d i t i o n s ensure the existence o f a steady state in which the level o f capital is strictly positive. One can also show that they i m p l y that labor is essential in production: F ( K , O) = O.
69 More specifically, we assume that the fimctions vi are twice continuously differentiable. If a - 1, then concavity requires that the function log(v) must be increasing and concave. If a is not equal to 1, then v 1-a must be increasing and concave if a < 1 and decreasing and convex if a > 1. In addition we need - a v ( L ) v"(L) > (1 - 2a)[v'(L)] 2 to assure the overall concavity of u. 70 Whenever there is one path that yields infinite utility it is always possible to construct other paths (in fact a continuum of paths) that also yield infinite utility. Thus, to ensure that there is only one solution to the planner's problem we need to constrain the discount factor so that life-time utility, U, is finite. The requirement (by I a < 1) involves the interaction of preferences and technology. See Alvarez and Stokey (1999) for a discussion of this type of conditions. 71 See Hornstein (1993), Rotemberg and Woodford (1995), and Chatterjee and Cooper (1993) for a discussion of models that move away from perfect competition and incorporate increasing returns to scale. 72 Suppose, for example, that the production function is Cobb-Douglas and that there is a stock of capital K and a number of labor hours N which will be divided equally among n fu-ms. Total production will be given by Y = nA(K/n) a~(N/n) a2 - AKa~Na2n 1 a~ a2. With decreasing returns to scale a I + a 2 < 1 and lim, _~~ Y = 0<~. 73 As ill the main text we use the notation DiF(.) to refer to the partial derivative of F(-) with respect to its ith argument. We use DF(.) to refer to the total derivative of a fimction of a single variable.
Ch. 14: Resuscitating Real Business Cycles
997
A.2. The dynamic social p l a n n i n g problem
Let us consider first the case in which allocation decisions are made by a benevolent planner who maximizes the welfare of the representative agent. The solution to this problem will be a symmetric Pareto-optimum in which all agents receive the same consumption and leisure allocations. The stationary economy: In the steady state of a deterministic version of this economy Y, C, I, and K all grow at rate ~, i.e., the model captures the Kaldor growth facts. This suggests that it is useful to write the planner's problem for this economy in terms of variables that are constant in the steady state: y = Y/X, c = C/X, i = I / X , k = K/X. Using these stationary variables the planner's problem is given by oo
max Eo ~
f l u ( c , 1 - Nt)
(A.2)
t-0
subject to: Yt
= AtF(k,,Nt),
(A.3)
Yt
= ct + it,
(A.4)
~/kt + 1 = it + (1 - b)k,,
(A.5)
k0
(A.6)
> 0,
where fi =_ b y ~-°. In a deterministic environment the solution to the problem of maximizing Equation (A.2) subject to conditions (A.3)-(A.5) would be a sequence of consumption, labor supply and capital accumulation decisions: {ct}t=0,°~ {N~}t=0,ooand {]~t}t~l.~ These decisions could be made at time zero, since no relevant information is revealed later on. In contrast, in a stochastic economy agents learn over time the realizations of the random shocks that affect their environment. It would be inefficient to ignore this information that will be available later on and cast in stone the consumption and leisure decisions at time zero. For this reason, the solution to the utility maximization problem is a set of contingency rules, which specify how much to consume and work at each point in time as a function of the state of the economy in that period. Since the state of the economy can be, at any point in time summarized by two variables, the value of At, which influences current output and helps predict future productivity, and the value of the stock of capital. Thus contingency rules take the form c = c ( k , A ) and N = N(k,A). D y n a m i c programming: To use this approach, we write the planner's problem in
recursive form as V ( k , A ) = max{u(c, 1 - N ) + f l E V ( k ' , A ' ) } ,
(A.7)
c,N,k I
subject to:
c + y k ' - (1 - 6)k = A F ( k , N ) .
(A.8)
where we use primes ( ) to denote the value of a variable in the next period. The value function V ( k , A ) represents the expected life-time utility of the representative
R.G. King and S.T. Rebelo
998
agent of an economy with a capital stock equal to k and a level of productivity equal to A. Equation (A.7) decomposes this life-time utility into two parts: the utility flow that accrues in the current period, u(e, L), and the expected utility that results from starting tomorrow with a stock of capital k' and a shock A' and proceeding optimally from then on. The planner will decide today on the value of U, so this variable is known with certainty at time t. However, the value of A' will only be known in the next period, so we have to compute the expectation of fiV(U,A') with respect to A': [3EV(U,A') = [3 f V(U,A')H(dA',A). Bellman's Principle of Optimality guarantees that the solution to the problem (A.2)-(A.5) coincides with the solution to the recursive problem (A.7)-(A.8) [see Stokey, Lucas and Prescott (1989), Section 9.1]. The efficiency conditions for the planning problem can be computed forming a Lagrangian in which Equation (A.7) is the objective and Equation (A.8) the constraint. The optimal value of c is dictated by DI u(c, 1 - N) = )~,
(A.9)
where X is the multiplier associated with the constraint (A.8). The optimal value of N, which we assume has an interior solution (0 < N < 1), is given by D2u(c, 1 - N) = )~ADzF(k, N).
(A. 10)
The optimal U is given by )~y = flED1 V(k',A') This condition involves the expectation of the term DI V(U,A'), which is unknown, since we do not know the form of the value function. Information about D1V(k,A) can, however, be obtained differentiating the Lagrangian with respect to k: D 1 V ( k , A ) = )~ [ADIF(k,N) + (1 - 6)] + [)~ADzF(k, N) - D2u(c, 1 - N)]
+
V(k',A')-
dN
d~-
dk' dk"
Using the same logic as in the derivation of the "envelope theorem" in demand theory, this equation can be greatly simplified by using the first-order conditions (A.9) and (A.10) to set the two bracketed terms equal to zero. Intuitively, given that the values of N and U were optimally chosen, there are zero net benefits from the adjustments in these quantities that will arise from a change k. Thus D~ V(k,A) can be simplified to D1V(k',A') = )~ [A'D1F(U,N') + (1 - 6)].
(A.11)
Finding the decision rules: Conditions (A.9) and (A. 10) can be used to solve for c and N as a function of )t, k and A. These functions are not quite the decision rules for
Ch. 14: Resuscitating Real Business Cycles
999
consumption and labor, since they depend on ,~ which we have not yet determined. We specify the resulting functions as N = N(k, ).,A) and c = ~(k, )~,A). To find the decision rule for capital, we proceed as follows. Using N = N(k, )~,A) and c = ~(k, X, A), we can express the optimization conditions as a first-order system o f nonlinear stochastic difference equations in ;. and k:
)~7
= flEX' [A'D1F(k',N(k',)(,A')) + (1 - 6)],
(A.12)
A F [ k , N ( k , )~,A)] = O(k, )~,A) + yk' - (1 - 6)k. The solution to this system is a pair of decision rules U = h(k,A)and )~ = )t(k,A). In turn, these imply decision rules for consumption and labor N = N ( k , A ) and c = c(k, A). Taking these decision rules for c,N,;~,U, we have a complete description of how quantities in the real economy will efficiently evolve through time. The steady state of the optimal economy: The stationary distribution of A is given by the function G(A) such that: G(A') = f H ( A ' , A ) G ( d A ) . Given this stationary distribution the mean value o f A can be computed as A* = f AG(dA). If we ignore, for the moment, the stochastic nature of A and set it equal to its mean, A = A*, the model reduces to a variant of the Cass-Koopmans neoclassical model. It is well known that this deterministic model has a unique non-trivial steady state which is globally stable [Stokey, Lucas and Prescott (1989), Section 6.1]. Replacing A and A ~ by A* in Equations (A.8)-(A.11) we obtain the system of equations that characterize the steady state:
A*DIF(k*,N*)+(1-6) = 7/3, A*D2F(k*, N*)D1 u(c*, 1 - N*) = D2u(c*, 1 - N*),
(A.13)
7k*
(A.15)
= A * F ( k * , N * ) - c* + (1 - 6 ) k * .
(A.14)
We use an asterisk to denote the steady-state values o f the different variables. This system of equations is recursive. Equation (A.13) determines the value of k*/N*; recall that F is homogeneous o f degree one and thus D1F is homogeneous of degree zero implying that DlF(k*, N*) = D1F(k*/N*, 1). Equations (A.14) and (A. 15)jointly determine c* and N*. We will return below to discussing the nature of the steady state in the competitive economy.
A.3. A dynamic competitive equilibrium interpretation Our theoretical discussion so far has focused on a planning problem. However, the stylized facts described in Section 2 pertain to market economies where economic decisions are made in a decentralized manner. For this reason we now turn our attention to this economy's competitive equilibrium under rational expectations. There are several ways of decentralizing the basic R B C model economy. Here we will focus on a sequential competitive equilibrium in which households own the firms
R.G. King and S.T. Rebelo
1000
and the stock of capital and make three inter-related decisions: how much labor to supply (Ns), how much capital to accumulate (k~), and how much to consume (c). In this decentralization scheme, households have to take into account the law of motion for the wage rate (w) and for the rental price of capital (R). Both of these prices are a function of the state of the economy, as summarized by the productivity level A and the aggregate capital stock k: w = w(k,A),
(A.16)
R = R(k,A).
(A.17)
To forecast these prices, agents have to know the functions w and R and the law of motion for A and k. The variable A evolves according to H ( A ' , A ) , while the law of motion for the aggregate capital stock will be described as k'=g(k,A). The H o u s e h o l d Problem. With these preliminaries in place we can now write the
household problem as: v(k~;A, k) = max {u(c, 1 - N~) + fiEv(k~;A', k')}, c,N~,k~
subject to: c + yk~ = w(k,A)N~. + (1 + R ( k , A ) - b)k~ + zc.
(A.18)
where v is the value function of the household and :v denotes the firms' profits, which, as we will see in a moment, are always equal to zero. It is useful to define the real interest rate as the rental price of capital net of depreciation: r ( k , A ) = R ( k , A ) - 6.
The solution to the household problem is described by the following contingent rules: k~ = ks(ks, k , A ) , c
= c(ks, k,A),
Ns = N(ks, k,A).
These rules must satisfy the following set of efficiency conditions: D2u(c, 1 - Ns) = Dl u(e, 1 - Ns) w ( k , A),
(A.19)
g D l u ( e , 1 - Ns) = f l E D l u ( c , 1 - Ns)[R(k' c Y ) + (1 - 6)].
(A.20)
Ch. 14:
Resuscitating Real Business Cycles
1001
The Firm "s Problem. The firms in this economy solve a static problem. They have to decide how much capital and labor to hire in the spot competitive markets for both of these factors:
max
k,t , Nd
Jr =
AF(kd, Nd)
-
wNd
-
Rkd.
The familiar optimization conditions for this problem are: ADtF(kd, Nd) = R(k, A),
(A.21)
ADzF(kd, Nd) = w(k, A).
(A.22)
Given that the production function exhibits constant returns to scale, profits will always be equal to zero: = AF(kd, Nd) - AD2F(kd, Nd)Nd -- ADIF(kd, Nd)kd = O. Market Clearing. There are three markets in this economy: spot markets for capital, labor and output. By Walras's law if two of these markets are in equilibrium the third market will also have to be in equilibrium. Thus we can state the equilibrium conditions limiting ourselves to the factor markets:
kd =k,=k,
Nd=Ns.
To ensure that this is a competitive equilibrium under rational expectations, the law of motion conjectured by households for the competitive equilibrium has to coincide with the actual aggregate law of motion for this variable: ks(k, k , A ) = g(k,A). The steady state in the market economy: If we treat N as fixed for the moment, we can interpret Equation (A. 13) as equating the long run demand and supply for capital. The real rate of return to capital in a decentralized version of this economy is given by r = A D 1 F ( k , N ) - 6. This can be seen as a demand schedule; given the value of r (and the value of N) it tells us the value of k that the economy would choose. The long run supply of capital is given by r = y/fi - 1 and is thus perfectly elastic: the capital stock of the economy always adjusts so that the steady-state real interest rate is r = y / f i - 1 . A.4. The welfare theorems
To show heuristically the connection between the competitive equilibrium and the Pareto Optimum we can now compare the first-order conditions of the competitive equilibrium with those of the planner's problem to show that they coincide. Replacing
1002
R.G. King and S.T. Rebelo
Equations (A.21) and (A.22) in (A. 18) and exploring the fact that F(.) is homogeneous of degree one, we obtain a resource constraint that is equivalent to the one implied by Equations (A.3)-(A.5). Making use of Equations (A.21) and (A.22) it can also be readily shown that (A.19)-(A.20) are equivalent to (A.9)-(A.11). Notice that the assumption o f rational expectations is crucial for this comparison. The equivalence between the conditions that characterize the two problems underlies the two welfare theorems that apply to this economy: the competitive equilibrium is Pareto Optimal and a Pareto Optimal allocation can be decentralized as a competitive equilibrium. The fact that the competitive equilibrium can be solved as a solution to a planning problem has important technical implications. Since the planners problem involves maximizing a continuous function defined over a compact set we know that a solution to the problem exists. Furthermore, since the planner's problem is strictly concave, its solution is unique. Thus, the existence and uniqueness o f the competitive equilibrium can then be established by exploring its equivalence to the planner's problem. There are many instances in which we may want to explore economies where the first welfare theorem does not hold. Examples include economies with distortionary taxes, externalities, or monopolistic competition. Rarely can the competitive equilibrium for these economies be mapped into a concave planning problem TM. We can still linearize the system o f equations that characterizes the competitive equilibrium to explore some of its properties. However, we no longer have the guarantee that the equilibrium exists or that it is unique. This is the reason why the multiple equilibrium literature discussed in Farmer (1993) focuses on economies in which the competitive equilibrium is suboptimal.
References
Abel, A.B., and J.C. Eberly (1995), "Investment and Q with fixed costs: an empirical analysis", Working paper (University of Pennsylvania). Aiyagari, S.R. (1994), "On the contribution of technology shocks to business cycles", Federal Reserve Bank of Minneapolis Quarterly Review 18:22-34. Alvarez, E, and N. Stokey (1999), "Dynamic programming with homogeneous fimctions", Journal of Economic Theory, forthcoming. Ambler, S., and A. Paquet (1994), "Stochastic depreciation and the business cycle", International Economic Review 35:101 116. Andolfatto, D. (1996), "Business cycles and labor market search", American Economic Review 86: 112-132. Backus, D.K., and P.J. Kehoe (1992), "International evidence on the historical properties of business cycles", American Economic Review 82:864-88. Barro, R.J. (1974), "Are government bonds net wealth?", Journal of Political Economy 82:1095-1117. Barro, R.J., and R.G. King (1984), "Time separable preferences and intertemporal substitution models of business cycles", Quarterly Journal of Economics 99:812839.
74 See Danthine and Donaldson (1985) for an exception.
Ch. 14: Resuscitating Real Business Cycles
1003
Basu, S., and M.S. Kimball (1997), "Cyclical productivity with unobserved input variation", Working Paper No. 5915 (NBER). Basu, S., J.G. Fernald and M.S. Kimball (1997), "Are technology improvements contractionary?", Working Paper (University of Michigan). Baxter, M. (1995), "International trade and business cycles", in: G. Grossman and K. Rogoff, eds., Handbook of International Economies, vol. 3 (Elsevier Science, Amsterdam) 1801-1864. Baxter, M., and U.J. Jermann (1999), "Household production and the excess sensitivity of consumption to current income", American Economic Review, forthcoming. Baxter, M., and R.G. King (1993), "Fiscal policy in general equilibrium", American Economic Review 83:315-334. Baxter, M., and R.G. King (1995), "Measuring business cycles: approximate band-pass filters for economic time series", Working Paper No. 5022 (NBER); Review of Economics and Statistics, forthcoming. Baxter, M., and A.C. Stockman (1989), "Business cycles and the-exchange-rate regime: some international evidence", Journal of Monetary Economics 23:377-400. Bils, M., and J.O. Cho (1994), "Cyclical factor utilization", Journal of Monetary Economics 33:31%354. Boldrin, M., and M. Horvath (1995), "Labor contracts and business cycles", Journal of Political Economy 103:972-1004. Boldrin, M., L.J. Chffstiano and J. Fisher (1995), "Asset pricing lessons for modeling business cycles", Working Paper (Northwestern University). Braun, R.A. (1994), "Tax disturbances and real economic activity in the postwar United States", Journal of Monetary Economics 33:441-462. Brock, WA., and L.J. Mirman (1972), "Optimal economic growth and uncertainty: the discounted case", Journal of Economic Theory 4:47%513. Burns, A.E, and W.C. Mitchell (1946), Measuring Business Cycles (National Bureau of Economic Research, New York). Burnside, C., and M. Eichenbaum (1996), "Factor hoarding and the propagation of business cycle shocks", American Economic Review 86:1154-1174. Burnside, C., M. Eichenbanm and S.T. Rebelo (1993), "Labor hoarding and the business cycle", Journal of Political Economy 101:245-273. Burnside, C., M. Eichenbaum and S.T. Rebelo (1995), "Capital utilization and returns to scale", NBER Macroeconomics Annual 1995 (MIT Press, Cambridge, MA) 67-110. Burnside, C., M. Eichenbaum and S.T. Rebelo (1996), "Sectoral Solow residuals", European Economic Review 40:861-869. Caballero, R.J., and E. Engel (1994), "Explaining investment dynamics in U.S. manufacturing: a generalized (S, s) approach", Working Paper (MIT). Campbell, J.R. (1998), "Entry, exit, embodied technology, and business cycles", Review of Economic Dynamics 2:371-408. Campbell, J.Y. (1994), "Inspecting the mechanism: an analytical approach to the stochastic growth model", Journal of Monetary Economics 33:463-506. Campbell, J.Y. (1999), "Asset prices, consumption, and the business cycle", ch. 19, this Handbook. Cass, D. (1965), "Optimum growth in an aggregative model of capital accumulation", Review of Economic Studies 32:223-240. Chaff, V.V., P.J. Kehoe and E.R. McGrattan (1996), "Sticky price models of the business cycle: can the contract multiplier solve the persistence problem?", Working Paper No. 5809 (NBER). Chatterjee, S., and R. Cooper (1993), "Entry and exit, product variety and the business cycle", Working Paper No. 4562 (NBER). Cho, J.O., and T.E Cooley (1994), "Employment and hours over the business cycle", Journal of Economic Dynamics and Control 18:411-432. Cho, J.O., and T.E Cooley (1995), "The business cycle with nominal contracts", Economic Theory, 13-33.
1004
R.G. King and S.T. Rebelo
Cho, J.O., and R. Rogerson (1988), "Family labor supply and aggregate fluctuations", Journal of Monetary Economics 21:233-245. Christiano, L.J. (1990), "Solving the stochastic growth model by linear quadratic approximation and by value function iteration", Journal of Business and Economic Statistics, 8:23-26. Christiano, L.J., and M. Eichenbaum (1992a), "Current real business cycle theory and aggregate labor market fluctuations", American Economic Review 82:430-450. Christiano, L.J., and M. Eichenbaum (1992b), "Liquidity effects and the monetary transmission mechanism", American Economic Review 82:346-353. Christiano, L.J., and J. Fisher (1995), "Tobin's q and asset returns: implications for business cycle analysis", Working Paper (Northwestern University). Cogley, T., and J.M. Nason (1995), "Output dynamics in real business cycle models", American Economic Review 85:49~511. Cooley, T.E, and G.D. Hansen (1989), "The inflation tax in a real business cycle model", American Economic Review 79:733-748. Cooley, T.E, and L.E. Ohanian ( 1991), "The cyclical behavior of prices", Journal of Monetary Economics 28:25-60. Cooley, T.E, and L.E. Ohanian (1997), "Post-war British economic growth and the legacy of Keynes", Journal of Political Economy 105:439-472. Cooley, T.E, and E.C. Prescott (1995), "Economic growth and business cycles", in: T.E Cooley, ed., Frontiers of Business Cycle Research (Princeton University Press, Princeton, NJ) 1-38. Correia, I., J. Neves and S.T. Rebelo (1992), "Business cycles 1850-1950: new facts about old data", European Economic Review 36:459-467. Danthine, J.-P., and J.B. Donaldson (1985), "A note on the effects of capital income taxation on the dynamics of a competitive economy", Journal of Public Economics 28:255-265. Danthine, J.-P., and J.B. Donaldson (1995), "Non-Walrasian economies", in: T.E Cooley, ed., Frontiers of Business Cycle Research (Princeton University Press, Princeton, NJ) 217-242. Danthine, J.-P., J.B. Donaldson and R. Mehra (1989), "On some computational aspects of real business cycle theory", Journal of Economic Dynamics and Control 13:449-470. den Haan, W.J. (1993), "Interaction between heterogeneous agents in intertemporal stochastic models: a solution algorithm and applications", Working Paper (University of California at San Diego). den Haan, W.J., G. Ramey and J. Watson (1997), "Job destruction and propagation of shocks", Working Paper (University of California at San Diego). Devereux, M., A.W. Gregory and G.W. Smith (1992), "Realistic cross-country consumption correlations in a two-country, equilibrium, business-cycle model", Journal of International Money and Finance 11:3-16. Dotsey, M., and C.S. Mao (1992), "How well do linear approximation methods work?", Journal of Monetary Economics 29:25-38. Dotsey, M., R.G. King and A.L. Wolman (1996), "State dependent pricing and the general equilibrium dynamics of money and output", Working Paper (University of Virginia). Dunlop, J.T. (1938), "The movement of real and money wage rates", Economic Journal 48:413-434. Dupor, B. (1998), "Aggregation and irrelevance in multisector models", Journal of Monetary Economics, forthcoming. Eichenbauna, M. (1991), "Real business cycle theory: wisdom or whimsy?", Journal of Economic Dynamics and Control 15:607-626. Evans, C. (1992), "Productivity shocks and real business cycles", Journal of Monetary Economics 29:191-208. Farmer, R. (1993), The Macroeconomics of Self-Fulfilling Prophecies (MIT Press, Cambridge,/VIA). Finn, M. (1991), "Energy, price shocks, capacity utilization and business cycle fluctuations", Institute for Empirical Macroeconomics Discussion Paper 50 (Federal Reserve Bank of Minneapolis). Friedman, M. (1957), A Theory of the Consumption Function (Princeton University Press, Princeton, N J).
Ch. 14: Resuscitating Real Business Cycles
1005
Fuerst, T. (1992), "Liquidity, loanable funds and real activity", Journal of Monetary Economics 29:3~4. Gali, J. (1996), "Technology, employment and the business cycle: do technology shocks explain aggregate fluctuations", Working Paper No. 5721 (NBER). Gomes, J., J. Greenwood and S.T. Rebelo (1997), "Equilibrium unemployment", Working Paper (University of Rochester). Gomme, E, and J. Greenwood (1995), "On the cyclical allocation of risk", Journal of Economic Dynamics and Control 19:91 124. Greenwood, J., Z. Hercowitz and G.W. Huffman (1988), "Investment, capacity utilization and the business cycle, American Economic Review 78:402-417. Greenwood, J., R. Rogerson and R. Wright (1995), "Household production in real business cycle theory", in: T.E Cooley, ed., Frontiers of Business Cycle Research (Princeton University Press, Princeton, NJ) 15~174. Hall, R.E. (1988), "The relation between price and marginal cost in U.S. industry", Journal of Political Economy 96:921-947. Hall, R.E. (1999), "Labor-market frictions and employment fluctuations", ch. 17, this Handbook. Hamilton, J. (1994), Time Series Analysis (Princeton University Press, Princeton, NJ). Hansen, G.D. (1985), "Indivisible labor and the business cycle", Journal of Monetary Economics 16:309-327. Hansen, G.D., and R. Wright (1992), "The labor market in real business cycle theory", Federal Reserve Bank of Mhmeapolis Quarterly Review 16:2-12. Hodrick, R., and E.C. Prescott (1980), "Post-war business cycles: an empirical investigation", Working Paper (Carnegie-Mellon University). Hopenhayn, H., and R. Rogerson (1993), "Job turnover and policy evaluation: a general equilibrium analysis", Journal of Political Economy 10:915 938. Hornstein, A. (1993), "Monopolistic competition, increasing returns to scale and the importance of productivity shocks", Journal of Monetary Economics 31:299-316. Horvath, M. (1997), "Sectoral shocks and aggregate fluctuations", Working Paper (Stanford University). Ingram, B., N. Kocherlakota and N. Savin (1997), "Using theory for measurement: an analysis of the cyclical behavior of home production", Journal of Monetary Economics 40:435-456. Kaldor, N. (1957), "A model of economic growth", Economic Journal, 67:591-624. King, R.G. (1991), "Value and capital in the equilibrium business cycle program", in: L. McKenzie and S. Zamagni, eds., Value and Capital Fifty Years Later (MacMillan, London). King, R.G. (1995), "Quantitative theory and econometrics", Federal Reserve Bank of Richmond Economic Quarterly 81:53-105. King, R.G., and C.I. Plosser (1994), "Real business cycles and the test of the Adelmans", Journal of Monetary Economics 33:405-438. King, R.G., and S.T. Rebelo (1993), "Low frequency filtering and real business cycles", Journal of Economic Dynamics and Control 17:207-231. King, R.G., and M.W Watson (1996), "Money, prices, interest rates and the business cycle", Review of Economics and Statistics 78:35-53. King, R.G., C.I. Plosser and S.T. Rebelo (1988a), "Production, growth and business cycles: I. The basic neoclassical model", Journal of Monetary Economics 21:195-232. King, R.G., C.I. Plosser and S.T. Rebelo (1988b), "Production, growth and business cycles: I. The basic neoclassical model, Technical Appendix", Working paper (University of Rochester). King, R.G., C.I. Plosser, J.H. Stock and M.W Watson (1991), "Stochastic trends and economic fluctuations", American Economic Review 81:819-840. Klein, L., and R. Kosobud (1961), "Some econometrics of growth: great ratios of economics", Quarterly Journal of Economics 75:173-198. Kocherlakota, N. (1996), "The equity premium: it's still a puzzle", Journal of Economic Literature 34: 42-71. Koopmans, T. (1947), "Measurement without theory", Review of Economics and Statistics 29:161 172.
1006
R.G. King and S.T. Rebelo
Koopmans, T. (1965), "On the concept of optimal economic growth", in: The Econometric Approach to Development Planning (Rand-McNally, Chicago, IL). Krnsell, E, and A.A. Smith (1998), "Income and wealth heterogeneity in the macroeconomy", Journal of Political Economy 106:876-896. Kuznets, S. (1973), "Modern economic growth: findings and reflections", American Economic Review 63:247-258. Kydland, EE., and E.C. Prescott (1982), "Time to build and aggregate fluctuations", Econometrica 50:1345 1370. Kydland, EE., and E.C. Prescott (1988), "The workweek of capital and its cyclical implications", Journal of Monetary Economics 21:343-360. Kydland, EE., and E.C. Prescott (1990), "Business cycles: real facts and a monetary myth", Federal Reserve Bank of Minneapolis Quarterly Review 14:3-18. Kydland, EE., and E.C. Prescott (1991), "The econometrics of the general equilibrium approach to the business cycles", Scandinavian Journal of Economics 93:161-178. Long, J., and C.I. Plosser (1983), "Real business cycles", Journal of Political Economy 91:39-69. Lucas, R. (1976), "Econometric policy evaluation: a critique", Carnegie-Rochester Conference Series on Public Policy 1:19-46. Lucas, R. (1977), "Understanding business cycles", Carnegie-Rochester Conference Series on Public Policy 5:7-29. Lucas, R. (1980), "Methods and problems in business cycle theory", Journal of Money, Credit and Banking 12:696-715. MaCurdy, T.E. (1981), "An empirical model of the labor supply in a life cycle setting", Journal of Political Economy 89:1059-1085. Mankiw, N.G. (1989), "Real business cycles: a new Keynesian perspective", Journal of Economic Perspectives 3: 79-90. McGrattan, E.R. (1994), "The macroeconomic effects of distortionary taxation", Journal of Monetary Economics 33:573-601. Mehra, R., and E.C. Prescott (1985), "The equity premium: a puzzle", Journal of Monetary Economics 15:145-161. Merz, M. (1995), "Search in the labor market and the real business cycle", Journal of Monetary Economics 36:269-300. Nelson, C.R., and C.I. Plosser (1982), "Trends and random walks in macroeconomic time series: some evidence and implications", Journal of Monetary Economics 10:139-167. Neusser, K. (1991), "Testing the long run implications of the neoclassical growth model", Journal of Monetary Economics 27:3-37. Pencavel, J. (1986), "Labor supply of men: a survey", in: O. Ashenfelter and R. Layard, eds., Handbook of Labor Economics (North-Holland, Amsterdam) 3-102. Phelps, E. (1966), Golden Rules of Economic Growth (Norton, NY). Plosser, C.I. (1989), "Understanding real business cycles", Journal of Economic Perspectives 3:51-77. Prescott, E.C. (1986), "Theory ahead of business-cycle measurement", Federal Reserve Bank of Minneapolis Quarterly Review 10:9-22. Radner, R. (1966), "Optimal growth in a linear-logarithmic economy", International Economic Review 7:1-33. Rebelo, S.T., and D. Xie (1999), "On the optimality of interest rate smoothing", Journal of Monetary Economics 43:263-282. Rios-Rull, J. (1994), "On the quantitative importance of market completeness", Journal of Monetary Economics 34:463-496. Rogerson, R. (1988), "Indivisible labor, lotteries and equilibrium", Journal of Monetary Economics 21:3 16. Rogerson, R., and R. Wright (1988), "Involuntary unemployment in economies with efficient risk sharing", Journal of Monetary Economics 22:501-515.
Ch. 14: Resuscitating Real Business Cycles
1007
Rogoff, K. (1986), "Theory ahead of business-cycle measurement: a comment", Carnegie-Rochester Conference Series on Public Policy 25:45~48. Romer, D. (1996), Advanced Macroeconomics (McGraw-Hill, New York). Rosen, S. (1986), "The theory of equalizing differences", in: O. Ashenfelter and R. Layard, eds., Handbook of Labor Economics, vol. 1 (North-Holland, Amsterdam) 641 692. Rotemberg, J.J., and M. Woodford (1992), "Oligopolistic pricing and the effects of aggregate demand on economic activity", Journal of Political Economy 100:1153 1207. Rotemberg, J.J., and M. Woodford (1995), "Dynamic general equilibrium models with imperfectly competitive product markets", in: T.E Cooley, ed., Frontiers of Business Cycle Research (Princeton University Press, Princeton, NJ) 243-293. Sargent, T. (1982), "Beyond demand and supply curves in macroeconomics", American Economic Review 72:382-389. Sbordone, A. (1997), "Interpreting the procyclical productivity of manufacturing sectors: external effects or labor hoarding?", Journal of Money, Credit and Banking 29:26-45. Shapiro, M. (1989), "Assessing the Federal Reserve's measures of capacity utilization", Brookings Papers on Economic Activity 1989(1): 181-225. Shapiro, M. (1993), "Capital utilization and the premium for working at night", Working Paper (University of Michigan). Shea, J. (1992), "Accident rates, labor effort and the business cycle", Working Paper (University of Maryland). Simkins, S. (1994), "Do real business cycle models exhibit business cycle behavior", Journal of Monetary Economics 33:381-404. Solow, R.M. (1956), "A contribution to the theory of economic growth", Quarterly Journal of Economics 70:65-94. Solow, R.M. (1957), "Technical change and the aggregate production function", Review of Economic Studies 39:312-320. Stock, J.H., and M.W Watson (1999), "Business cycle fluctuations in US macroeconomic time series", ch. 1, this Handbook. Stokey, N.L., and S.T. Rebelo (1995), "Growth effects of flat-rate taxes", Journal of Political Economy 103:519-550. Stokey, N.L., R.E. Lucas and E.C. Prescott (1989), Recursive Methods in Economic Dynamics (Harvard University Press, Cambridge, MA). Surmaaers, L.H. (1986), "Some skeptical observations on real business cycle theory", Federal Reserve Bank of Minneapolis Quarterly Review 10:23-27. Tarshis, L. (1939), "Changes in real and money wage rates", Economic Journal 49:150-154. Thomas, J. (1997), "Lumpy investment, partial adjustment, and the business cycle", manuscript (University of Virginia, November). Veracierto, M. (1996), "Plant level irreversible investment and equilibrium business cycles", Working Paper (Cornell University). Watson, M.W. (1994), "Business cycle durations and postwar stabilization of the U.S. economy", American Economic Review 84:24M6. Wynne, M. (1987), "The effects of government spending in a perfect foresight model", Working Paper (University of Rochester).
Chapter 15
STAGGERED PRICE A N D WAGE SETTING IN MACROECONOMICS * JOHN B. TAYLOR Stanford University
Contents Abstract Keywords 1. Introduction 2. A n empirical guide to price and wage setting in m a r k e t e c o n o m i e s 2.1. General observations about wage and price setting 2.1.1. Wage setting 2.1.2. Price setting 2.2. Individual firm and worker evidence 2.2.1. Direct evidence on wage setting 2.2.2. Indirect evidence on wage setting 2.2.3. Direct evidence on price setting 2.3. Summary of findings about price and wage setting 3. Market-clearing and expected-market-clearing approaches 3.1. Market-clearing models 3.1.1. Empirical tests 3.2. Expected-market-clearing models 4. Staggered contracts m o d e l s 4.1. A simple price setting model 4.2. More general staggered wage- and price-setting models 4.2.1. Fixed duration models 4.2.2. Random duration models 4.2.3. State-dependent duration models 5. Bolstering the theoretical foundations o f staggered contracts m o d e l s 5.1. Deriving the optimal price: the role of market power 5.2. Towards dynamic optimizing models of staggered price and wage setting 5.3. Staggered price and wage setting in general equilibrium models
1010 1010 1011 1013 1013 1013 1014 1015 1015 1017 1018 1020 1021 1021 1022 1024 1027 1027 1029 1029 1030 1031 1032 1033 1033 1035
* This research was supported by the Center for Economic Policy Research at Stanford University. I wish to thank VV Chari, Christopher Erceg, Robert Hall, Ellen McGrattan, Akila Weerapana, and Michael Woodford for useful comments and assistance. Handbook of Macroeconomics, Volume 1, Edited by J.B. Taylor and M. Woodford © 1999 Elsevier Science B.V. All rights reserved 1009
1010 5.4. Explanationsof why price and wage setting is staggered 5.5. Indexingand optimal contractlength 6. Persistence puzzles and possible resolutions 6.1. Inflationpersistence 6.2. Real output persistence 6.3. Changes in stabilityand nominal rigidity overtime 7. Concluding remarks on policy applications and future research References
JB. Taylor 1037 1038 1038 1039 1040 1042 1042 1044
Abstract
This chapter reviews the role of temporary price and wage rigidities in explaining of the dynamic relationship between money, real output, and inflation. The key properties to be explained are that monetary shocks have persistent, but not permanent, effects on real output, and that the correlation between current output and inflation is positive for leads of inflation and negative for lags of inflation. The paper begins with a short empirical guide to price- and wage-setting behavior in market economies. It then compares alternative price- and wage-setting theories and argues that staggered contracts models continue to provide the most satisfactory match with the key macroeconomic facts. It then examines the microeconomic foundations of staggered contracts models and reviews some of their extensions and applications. Research in this area has been very active in the 1990s with a remarkable number of studies using, estimating , or testing models o f staggered price and wage setting. A new generation of econometric models incorporating staggered price and wage setting with rational expectations has been built. Researchers have begun to incorporate staggered wage and price setting into real business cycle models. Close links have been discovered between the parameters of people's utility functions and the parameters of staggered price- and wage-setting equations. There is now a debate about whether standard calibrations of utility functions prevent staggered price models, at least those with frequent price changes, from explaining long persistence of real output. A theme of the paper is that the advent of rational expectations in the 1970s led to models of price and wage rigidities which were more amenable to empirical testing than earlier models, and this is one reason for the recent controversies and debates. There is much to be discovered from these debates and from the future research they stimulate. Keywords staggered price and wage setting, staggered contracts model, contract multiplier, money, monetary policy, monopolistic competition, market clearing, expected market clearing, time-dependent pricing, state-dependent pricing JEL classification: E32, El0
Ch. 15: StaggeredPrice and WageSetting in Macroeconomics
1011
1. Introduction
Why does a change in the money supply cause real output and employment to change in the short run, but not in the long run? This is one of the oldest questions in macroeconomics, yet it persists as both the most difficult and the most practical of all. From David Hume in the 18th century to Milton Friedman in the 20th, economists have had a common answer: there are temporary price and wage rigidities in the economy. In other words, in the short run, price and/or wage levels do not change as much as the money supply changes. Thus, if the money supply increases, then real money balances rise, stimulating production and employment. As described by David Hume more than 200 years ago, "by degree the price rises, first of one commodity, then of another", or as stated more recently by Milton Friedman "prices are sticky" [see Rotwein (1955, p. 38) and Friedman (1982, p. 64)]. Except in unusual circumstances, it takes time for price and wage levels to fully adjust; as prices and wages gradually rise, real money balances return to their original level and in the long run the real economy is unaffected. The purpose of this chapter is to review the current state of knowledge about the nature of price and wage rigidities and their ability to explain the dynamic relationship between money, real output, and inflation. I survey recent research, classify the major facts and models, and draw some conclusions and suggestions for future research. Because both price rigidities and wage rigidities are important for macroeconomic dynamics, both types of rigidities are reviewed. The dynamic stochastic properties of money, output, and inflation that we would like the theories to explain have been carefully documented using modern time series techniques in the chapters by Stock and Watson (1999) and by Christiano, Eichenbaum and Evans (1999) in this Handbook. In addition to the property that money shocks have a short-run impact on output and a long-run impact on inflation, three other important properties of the money, real output, and inflation relation have attracted attention. These properties are (1) that a monetary shock has a persistent effect on real output a propagation effect that lasts well beyond the initial impact effect of a monetary shock, (2) that there is a positive correlation between real output and future inflation, and (3) that there is a negative correlation between inflation and future real output. [See Stock and Watson (1999), Table 2, lines 41 and 54, and Christiano, Eichenbaum and Evans (1999), Figures 2 and 3, which compare the impact of alternative measures of money shocks.] Properties (2) and (3) can also be characterized using vector autoregressions and the concept of Granger-causality: property (2) is that real output Granger-causes inflation positively and property (3) is that inflation Granger-causes real output negatively. This "reverse dynamic" cross correlation was shown to hold in the USA and other countries in Taylor (1980a, 1986). The ability to explain such robust findings represents an important measure of success for any theory of price and wage rigidities. It was in the early 1970s that the rational expectations revolution in macroeconomics first began to take hold. Of course, price and wage rigidities were a big part of
1012
J.B. Taylor
macroeconomics before the early 1970s; indeed, they were central to both Keynesian and monetarist ideas. However, by forcing macroeconomists to think in economywide (general equilibrium) terms, the rational expectations revolution fundamentally changed how economists model price and wage rigidities. It was at this time that the staggered contracts model was first proposed. This model emphasizes the overlapping of individual prices and wages due to staggered price and wage setting. It could explain not only why changes in money impact real output, but also why the other properties mentioned above are found to hold in many countries. Fron~ the start the staggered contract model was explicit enough that testable hypotheses could be formulated and, as a result, the model underwent extensive empirical and theoretical scrutiny, generating much debate. This explicimess was necessitated, in my view, by the discipline of the rational expectations approach to modeling. During the 1980s, researchers extended and modified models of staggered price and wage setting, fitted them to data from many different countries, and began to give them a more specific theoretical footing. Models of staggered price and wage setting were frequently used as a source of monetary nonneutrality in rational expectations policy studies of monetary policy rules. By using these theories of price and wage rigidities for policy analysis and by confronting them with practical tests using real world data both microeconomic and macroeconomic - much has been learned about the process of wage and price formation in market economies. In the 1990s research on staggered price and wage setting has shown no signs of slowing down. Modifications motivated by a need to explain inflation dynamics more accurately or to reduce model complexity have been introduced and used in econometric models. A new generation of econometric models incorporating price and wage rigidities with rational expectations has been put in place for policy analysis at many central banks including the Federal Reserve Board. Perhaps even more exciting, researchers have begun to incorporate theories of staggered wage and price setting into what would otherwise be real business cycle models. This research has uncovered close links between the parameters of people's utility functions or firm's production functions and the parameters of staggered price and wage setting equations. The research has also uncovered a puzzle: in some models, standard calibration of utility function parameters indicates substantially less persistence of real output than had been found in earlier estimates of staggered contract models that had not made this formal link to individual utility maximization. Several ways to resolve this puzzle have been proposed and are discussed here. On balance, the staggered wage and price setting models still seem to be consistent with the broad features o f the data, but there is much to be discovered in future research. With the price and wage setting theories so amenable to empirical testing, it is not surprising that controversies and debates about price and wage rigidities continue. I begin the chapter with a short guide to price and wage setting behavior in market economies based on direct and indirect observations. I then review alternative price and wage setting models and show how models based on staggered price and wage setting match the facts mentioned above, a match that explains, in my view, why
Ch. 15: StaggeredPrice and WageSetting in Macroeconomics
1013
the models have proved useful to macroeconomists doing applied econometrics and policy work. I then go on to explore the microeconomic foundations for these models, discussing several intriguing puzzles and their possible resolutions. Finally, I discuss several historical and policy applications of econometric models based on staggered price and wage setting. As research on staggered price and wage setting has developed, several surveys of research on price and wage rigidities have appeared, including Taylor (1985), Btanchard (1990), Roberts (1995), and Goodfriend and King (1997), as well as several good graduate textbook treatments including Blanchard and Fischer (1989, Chapter 8) and Romer (1996, Chapter 6). In this survey I try to focus on topics that are either more recent or that have not been emphasized in these other surveys and reviews. I also try to trace out the gradual evolution of the staggered contracts model over time.
2. An empirical guide to price and wage setting in market economies Hume's theoretical idea - that slow price adjustment provides an explanation for the short run impact of changes in money on production - was based on his observations of price changes in the market economy in which he lived. Thanks to research in recent years we now have much more quantitative information about the timing, frequency, and determinants of price and wage changes. 2.1. General observations about wage and price setting
Before discussing this quantitative evidence, I think it is useful to first review some general observations about wage and price setting which are simply part of our everyday experience as participants in market economies. One might criticize these types of observations as arbitrary and subjective, but in fact such informal case studies have informed the theoretical research in this area much as David Hume's casual observations informed his theory. 2.1.1. Wage setting
One observes a great variety of ways in which wages are determined through the interaction of workers and firms in a market economy. These mechanisms evolve over time especially when there are large changes in the economic environment such as a change in the tax law or a rise in the average rate of inflation. There are, however, some important common features of these wage setting arrangements. For most workers employed in medium to large sized firms, wages (including benefits) are normally adjusted at rather long discrete intervals, most commonly once per year. The wage adjustment is typically associated with an extensive performance and salary review. A large fraction of the wage payment is usually stated in a fixed amount of dollars (or other currency) per unit of time (hour, week or month), but
1014
J.B. Taylor
overtime pay, bonuses, profit sharing, piece rates, and other incentive arrangements are not uncommon for part of workers' pay. Indexing of wages to macroeconomic variables, such as the inflation rate, occurs, but is rare in wage setting arrangements of one year or less. It is important to emphasize that setting nominal wages at a fixed level for more than several quarters and usually for as long as a year appears to be just as prevalent for workers who are not in unions, or who do not have formal employment contracts, as for union workers with employment contracts. It is a mistake to limit studies o f how wages are set to formal employment contracts. As we will see below there is more quantitative information about indexing and contract length for workers and firms in the union sectors, but in the USA only a relatively small fraction of workers are in unions, so the evidence is less relevant. Throughout the economy wage setting is not usually synchronized in any one period. Rather wage adjustments occur at different times for different firms throughout the year, much as the dates for firms' fiscal years vary throughout the year. There are exceptions to this nonsynchronization. In Japan, for example, there has been a Shunto, or spring offensive, during which wages at most large firms are set. Wage decisions are clearly influenced by wages paid to other workers in a community or in similar occupations. When hiring new engineers or business school graduates, firms must consider the prevailing wage in the market for similarly educated workers when designing a wage package. Pattern bargaining among labor unions where the wage set at one union becomes a strong influence at another union is common. 2.1.2. Price setting There are even greater varieties of price setting than of wage setting. Prices change continuously in auction markets for commodities and financial instruments. The idea of price rigidities seems ludicrous when applied to such markets. On the other hand, prices change infrequently in posted-price customer markets for goods and services. [Okun (1981) used the term "customer markets" to distinguish these types of markets from "auction markets".] Prices of final goods in customer markets seem to be more responsive to changes in the costs of intermediate inputs to production than they are to changes in demand. In other words, changes in markups seem less of a source of price change than changes in costs. But even within socalled customer markets, prices - and markups of prices over costs - can and do change rapidly. For example, the price of airline tickets changes on a day to day basis depending on estimates of demand. Some airline tickets are now even auctioned on the Internet. Like wages, the prices of goods and services appear to be staggered over time and set taking the prevailing price of competing producers (or monopolistically competing producers) into account. News accounts suggest, for example, that a decision to change the price of Big Macs is closely watched by Burger King and other fast food companies. Case studies of pricing at large supermarket chains by Levy, Dutta, Bergen
Ch. 15: Staggered Price and Wage Setting in Macroeconomics
1015
and Venable (1998) show that obtaining information about the prices of competitors is the first step in deciding on how much to change prices; they find that "people are sent on a weekly basis to competitors" stores to gather and record (usually by hand) their price ... ". Clearly some degree of non-synchronized or staggered price setting is necessary if such surveys of competitors' prices are to be useful. The policy o f matching a competitor's price is common among discount stores. The prevailing price is even an important consideration in price setting in auction markets. For example, knowing the price of recently auctioned items influences the reservation price of buyers and the minimum price of sellers in auctions for art and other rare goods. Because surveys of competitors and other steps in the process of changing prices (such as changing and verifying tag changes) are costly to undertake, Levy, Bergen, Dutta and Venable (1997) find that the costs to a retail store of changing prices are quite large. Examining several large US supermarket chains, they find that the fixed cost is about $0.52 per price change; such costs are "fixed" in the sense that they do not depend on the size of the price change. (Because the cost of changing a menu also does not depend on the size of the price change, such costs are usually called "menu costs".) Using a different methodology Slade (1996) finds the fixed costs of a retail price change to be even larger. 2.2. Individual f i r m and worker evidence
One of the great accomplishments of research on wage and price rigidities in the 1980s and 1990s is the bolstering of these case studies and casual impressions by quantitative evidence from thousands of observations of price and wage setting collected at the firm, worker, or union level. By carefully studying these data one can learn much about the nature of wage and price rigidities in the USA and other countries. Some of the conclusions I draw from these data are summarized in Section 2.3 below, but it is worthwhile to consider in detail several of the individual research studies. 2.2.1. Direct evidence on wage setting
Most quantitative microeconomic information on wage setting comes from government data collected on the union sector. For example, Taylor (1983) and Cecchetti (1984) use data from major union contracts in the USA to get some quantitative measures for wage rigidities. Unfortunately, the large labor union sector represents only about 10 percent of US employment. More than half of the wage agreements in the union sector last for more than one year, with the remaining being either one-year or two-year contracts. Slightly over 50 percent of the multiyear contracts in this sector are indexed. The data reported by Taylor (1983) demonstrate how the wage setting is highly nonsynchronized. In any one quarter only about 15 percent of the workers are adjusting their contracts. In any one year only about 40 percent are adjusting their contracts. For example, aerospace, trucking, and automobile workers contracts are generally renegotiated in different quarters.
1016
J.B. Taylor
Cecchetti (1984) computed a time series of average duration of wages in the USA for the large union sector. He found that the average period between wage changes was slightly less than 2 years (7 quarters) in the 1950s and 1960s when inflation was low, but then fell to about one year (four quarters) in the 1970s during the high-inflation period. Hence, there is some evidence that the length of the period between wage changes is sensitive to the underlying inflation rate. However, even in the years of the great inflation wages were set at fixed nominal levels for one year on average. Cecchetti (1984) also found evidence that the amount of indexing increased as the inflation rate rose from the 1960s to the 1970s. Of course, quantitative observations on wage setting at the microeconomic level is not confined to the USA. For example, Fregert and Jonung (1986) provide evidence from Sweden. Their data show that contract length decreased in Sweden as inflation and monetary uncertainty rose. However, average contract length never dropped below one year. They also found that wage setting showed little synchronization until the 1950s when centralized wage bargaining was introduced. Recall that Japan is another country where much union wage setting occurs at the same time each year. Lebow, Stockton and Wascher (1995), McLaughlin (1994), and Card and Hyslop (1997) provide evidence about wage rigidity in the USA using individual wage data from the Panel Study of Income Dynamics. Because these studies, which reach similar conclusions, are not restricted to union workers, they are an important addition to the earlier studies on unions. However, because the wage is only sampled once per year, these studies do not provide information about whether the average duration of fixed wages is less than one year. Card and Hyslop (1997), who also examine data from the US Current Population Survey form 1979 to 1993, report that between 6 and 15 percent of workers (among those who do not change jobs) have their nominal wages unchanged from one year to the next, suggesting a relatively small number of workers whose wages change less frequently than once per year. Card and Hyslop (1997) also report that the frequency of wage adjustment increases with inflation: during the highinflation period of the late 1970s, only 6 to 10 percent of workers with the same job had unchanged wages from one year to the next, while during the lower-inflation period of the 1980s the fraction of workers with unchanged wages was close to 15 percent. This confirms the results observed by Cecchetti (1984) using union wage data in the USA and Fregert and Jonung (1986) for Sweden. Card and Hyslop (1997) also report information on downward wage rigidity (again for annual wage changes) and find that a significant fraction of workers (15 to 20 percent) experience nominal wage reductions from one year to the next. This suggests that downward wage rigidities are no more significant for macroeconomics than upward wage rigidities. In fact, few of the models of price and wage rigidities used empirically in macroeconomic models make use of the distinction between upward and downward rigidity - in particular asymmetric rigidities have little relevance for the key empirical correlations mentioned in the introduction.
Ch. 15: Staggered Price and Wage Setting in Maeroeconomics
1017
2.2.2. Indirect eoidence on wage setting
The microeconomic evidence on wage setting procedures can be supplemented with more indirect evidence based on macroeconomic data. I f some structural assumptions about the general form of wage setting are made, it is possible to extract information about individual wage setting mechanisms from the autocorrelation functions of aggregate time series data. The indirect method is similar to estimating the parameters of utility functions or production functions from data on consumption and investment. The duration o f fixed nominal wages - and the distribution of the different durations in the economy - has implications for the aggregate time series; from the time series data one can back out estimates of the wage duration distribution. Examples of these indirect methods are Benabou and Bismut (1987), Levin ( 1991 ), Taylor ( 1979b, 1993 a), Montgomery (1983), Christiano (1985), and Backus (1984). Benabou and Bismut (1987), Levin (1991), and Taylor (1993a) examine the distribution of workers by length of wage setting interval in the USA. There are similarities in the results even though different data sets are used. Benabou and Bismut (1987) find that the average length of time between wage adjustments is about 1½ years with a mode length of one year; the distribution of workers by contract length is not geometric: there are fewer workers with one-quarter wage setting intervals than fourquarter intervals. Levin (1991) also reports estimates of a cross sectional distribution of wage changes in the USA. He finds that about 10 percent of wages are adjusted in one quarter, 25 percent in two quarters, and 65 percent in four quarters. Levin uses quarterly data on aggregate wages to obtain these estimates.Using a less flexible geometric/exponential distribution assumption and focussing on Canada, Backus (1984) used exchange rate data to infer a median contract length slightly over a year, ranging from 5.4 quarters to 8.4 quarters. Estimates reported in Taylor (1993a) also indicate that annual contracts are the most common length of wage setting interval. Aggregate time series for wages in the USA imply that about 80 percent of workers have annual contracts; the fraction is somewhat smaller in Canada and Germany. Estimates of time-varying cross-section distributions are also reported in Taylor (1993a) to accommodate some synchronization as in the case of the Shunto mechanism in Japan. (The distribution of wage changes can not be the same in each quarter in Japan because more workers have their wages adjusted in the Spring quarter.) But, even in the Japanese economy, not all workers have wage adjustments in the second quarter. Some annual wage changes occur in the summer quarter and not all annual wage contracts are adjusted as part of the Shunto. Moreover, wages for some workers change more frequently than once per year. According to the estimates in Taylor (1993a), aggregate wages behave as if 88 percent of wage contracts in Japan are annual, 12 percent are adjusted every quarter, and a negligible amount are adjusted every two quarters. Of the 88 percent, 42 percent of workers have their wages changed in the spring quarter, 26 percent in the summer quarter, 16 percent in the fall quarter and 3 percent in the winter quarter.
1018
J.B. Taylor
Some empirical researchers have also endeavored to determine whether wages are set relative to the prevailing wages as the casual observations mentioned above indicated. They use auxiliary structural assumptions about the wage process to derive spillover effects from aggregate data. Montgomery (1983) and Benabou and Bismut (1987) report little evidence of such spillovers, but these estimates require strong auxiliary assumptions. In sum, these empirical studies suggest that the most common wage setting interval for the USA is about one year and that wage setting dates are staggered. However, a potential problem with these indirect estimates is their dependence on time aggregation of the quarterly data employed. Using continuous time econometric methodology, Christiano (1985) examined whether any wage setting intervals were shorter than the minimum quarterly interval in the aggregate wage data, and found evidence that there were some that short. These disadvantages of the use of the indirect methods point to the great value of better data on wage setting in the economy as a whole. 2.2.3. Direct evidence on price setting
Carlton (1986, 1989), using actual transactions price data that originated with Stigler and Kindahl (1970), has documented in great detail the extent of price rigidity for a wide variety of products in the USA. [Carlton (1989) also provides a useful summary of studies of price rigidity prior to Stigler and Kindahl (1970). One of the most interesting early findings, attributed to EC. Mills, is that the empirical frequency distribution of price change is U-shaped: goods with low-frequency and high-frequency price changes are more common than goods with medium-frequency price changes]. For most product groups, Carlton (1989) found that the time between adjustment of transactions prices seems remarkably long: ranging from about 1½ years for steel, cement, and chemicals to about g1 year for plywood and nonferrous metals. Carlton found little evidence for a fixed cost of adjusting prices, but observed a positive correlation between industry concentration and price rigidity. Cecchetti (1986) collected data on US magazine prices and also found price changes to be remarkably infrequent. In the 1950s the average length of time between price changes was 7 years; in the high-inflation years in the 1970s the time between price change was much lower at 3 years, but still remarkably infrequent given the changes in demand and costs during such long periods. Similarly, Kashyap (1995) found that mailorder companies keep their catalog prices fixed for periods ranging from six months to two years. Surveys of pricing policies at firms by Blinder (1994) and by Blinder et al. (1998) confirm the findings of Carlton and Cecchetti. Blinder (1994) found the mode frequency of price adjustment for firms in the survey to be one year. About 40 percent of firms tend to change their prices once per year, while only 10 percent change prices more frequently than once per year; the remaining 50 percent leave their prices unchanged for more than a year. Blinder (1994) also reports that the mean lagged response of price changes to changes in demand or costs is about three months and is
Ch. 15." Staggered Price and Wage Setting in Macroeconomics
1019
invariant to whether the change is positive or negative, supporting Carlton's (1989) result. In another study of survey data, Buckle and Carlson (1995) found that the average duration of prices at small business was about 8 months in the USA during the 1980s and 1990s and about 7 months in New Zealand during the early 1990s. These durations are only slightly smaller than Blinder's findings. Buckle and Carlson also found that the average duration between price changes was shorter in periods of higher inflation. Until very recently few of the studies of price setting have examined directly the degree to which prices are set in a staggered or synchronized fashion. Domberger and Fiebig (1993) look at the amount of staggering by examining the skewness of the distribution of price changes. They look at prices in 80 disaggregated industry groups in the UK. They find a significant lack of symmetry, indicating that many prices are not changed in a given quarter. Moreover, the sign of the skewness is related to the sign of the average price change. An increasing average price causes a rightward skew, and a decreasing average price causes a leftward skew. Using a data set on retail store prices, Lach and Tsiddon (1992, 1996) find that the prices at retail stores are staggered across different price-setters. Eden (1994a), Levy et al. (1997), Warner and Barsky (1995) also examine the patterns of individual price changes at the retail level. The data used by Lach and Tsiddon consist of the prices of different meat products and wines at retail stores in Israel. They find that in any given month only a fraction of stores are changing the price of a given meat product or wine. The monthly fractions of stores changing prices are usually in the 30 to 40 percent range. Interestingly they find that price changes for different products within a store are highly synchronized. When stores change prices they seem to change the price for most of their products at the same time: within-store synchronization. But most stores make these adjustment at different times: across-store staggering. Dutta, Bergen and Levy (1997) provide evidence of much more frequent price change at the retail level than would be expected from the work of Carlton (1986), Cecchetti (1986), and Blinder (1994). Dutta, Bergen and Levy (1997) examine retail and wholesale prices of several types of frozen and refrigerated orange juice in the Midwestern USA. They find that orange juice prices at supermarkets change very frequently: about every 2 weeks, much more frequently than the price change observed by earlier researchers. Dutta, Bergen and Levy (1997) argue that the frequent price adjustment in their study reflects the highly competitive nature of the supermarket business in the Midwest. Such rapid price adjustment may also reflect weekly, monthly, or seasonal discounting - the price could simply fluctuate between a rigid "regular" price and another "rigid" sale price, and not reflect any true price flexibility. In fact, Dutta, Bergen and Levy (1997) find the adjustment of retail orange juice prices to changes in costs to be somewhat slower than the average duration of prices about three to six weeks - in comparison to the twelve to sixteen weeks reported by Blinder (1994).
1020
JB. Taylor
2.3. Summary o f findings about price and wage setting It is difficult to summarize briefly the large amount of microeconomic evidence on wage and price setting discussed above. And we still have much to learn from this evidence. But I would emphasize the following general features of price and wage setting in a market economy based on this research: (1) While casual observation may suggest that wage rigidity is greater than price rigidity, the detailed studies do not provide evidence that one form of rigidity is more significant than the other: the studies suggest that price changes and wage changes have about the same average frequency - about one year. It would be inaccurate and misleading to build a model in which the average frequency of price or wage adjustment is longer than one year. Price and wage rigidities are temporary. But one should also feel comfortable with a model that assumes that prices and wages do not all change instantaneously and simultaneously, as if determined on a spot market with full information. And there is no empirical reason - aside from the need for a simplifying assumption or the desire to illustrate a key point - to build a model in which wages are perfectly flexible (determined on a spot market with full information) while prices are temporarily rigid, or vice versa. Except for the findings of Blinder (1994) and Dutta et al. (1997) on the effect of changes in costs on prices, this review of wage and price rigidities has said little about the connection between prices and wages, a subject taken up in the chapter by Rotemberg and Woodford (1999) in this Handbook. There is a long history of thought on the behavior of real wages, or product wages, over the business cycle, leaving the impression that there is little correlation, either positive or negative, between real wages and the business cycle. Domowitz, Hubbard and Petersen (1986) and Carlton (1989) review the empirical literature on the relationship between price rigidities and wage rigidities. There is little agreement among empirical researchers about whether the mark-up of price over costs is procyclical or countercyclical. Of course there is a strong correlation between the growth of real wages and long-term productivity growth, as the slowdown in productivity and real wage growth in the t970s illustrates. But this is a correlation between long-term trends, not a business cycle phenomenon related to the effects of money on the economy. (2) There is a great deal o f heterogeneity in wage and price setting. In fact, the data suggest that there is as much a difference between the average lengths of different types of price setting arrangements, or between the average lengths of different types of wage setting arrangements, as there is between wage setting and price setting. Grocery prices change much more frequently than magazine prices frozen orange juice prices change every two weeks, while magazine prices change every three years! Wages in some industries change once per year on average, while others change once per quarter and others once every two years. One might hope that a model with homogeneous "representative" price or wage setting would
Ch. 15." StaggeredPrice and WageSetting in Macroeconomics
1021
be a good approximation to this more complex world, but most likely some degree of heterogeneity will be required to describe reality accurately. It is worth noting that the aggregate time series studies of Christiano, Eichenbaum and Evans (1999) and Stock and Watson (1999) also show considerable heterogeneity in price and wage setting: for example, commodity prices seem to respond more quickly to money shocks than general price indices or than wages. (3) Neither price setting nor wage setting is synchronized. Except for cases of national union bargaining, wage setting is staggered through time, whether one looks at union or non-union workers. Price setting is also staggered through time. These facts, which are apparent in casual observation, are confirmed in studies of wages, retail prices, and industrial prices. (4) The frequency of wage and price changes depends on the average rate of inflation. Data from union workers and non-union workers in different countries show that the frequency of wage setting increases with the average rate of inflation. Similarly, prices at small businesses, industrial prices, and even the prices of products like magazines are adjusted more quickly when the rate of inflation is higher. This dependency of price and wage setting on events in the economy is one of the more robust empirical findings in the studies reviewed here. However, it should be emphasized that for the range of inflation rates observed in the developed economies in the 1970s the average duration of wages and prices remained high. Moreover, we have no empirical evidence that anything other than a change in the inflation rate would change the frequency of price and wage adjustment, though one would expect legal or technological changes that increase the cost of changing prices would reduce price adjustment frequency. For a given average inflation rate, constant frequencies of price adjustment may not be a bad assumption to make in an empirical or policy model.
3. Market-clearing and expected-market-clearing approaches Having examined the nature of price and wage setting at the microeconomic level, I now turn to a discussion of how price and wage rigidities can explain the impact of money on the economy. I focus on explanations of the impact effect of money on real output in this section, considering both market-clearing and expected-market-clearing approaches. In general I assume that expectations are endogenous and described by the assumption of rational expectations. The rational-expectations assumption rules out the possibility that biased or adaptive expectations are a source of monetary nonneutralities, though I briefly discuss learning models which can temporarily result in such biases. 3.1. Market-clearing models Market clearing models assume that prices and wages can adjust instantaneously to satisfy equilibrium conditions. In order for such models to explain the slow adjustment
t022
JB. Taylor
of prices and thereby explain the impact of a change in money on the economy a la Hume and Friedman, it is necessary to posit some lack of information by people which slows down the adjustment of prices endogenously. Imperfect information about whether a change in the money supply or some other factor is the source of the shift in a firm's demand curve, for example, may cause prices to change by less than they would if the firms were fully informed. Thus, prices become temporarily rigid or sticky in an otherwise perfectly flexible price model. Robert Lucas's (1972) path-breaking "expectations and the neutrality of money" paper - which introduced rational expectations and dynamic optimization into economy-wide monetary models - takes this approach. McCallum (1984) provides a good review of this model and Lucas (1996) provides a recent survey of the general imperfect-information approach in comparison with other approaches. The Lucas (1972) model is an overlapping-generations model with rational expectations in which trading takes place in decentralized markets. The overlapping-generations model assumption is used to create an endogenous demand for money. The old, who are neither able to store goods they produce when young nor produce goods when old, use money to pay the young for the goods. When the old exchange money for goods a price is determined. Under certain uniqueness assumptions, a single equilibrium price level can be found in each period. If the money supply is constant, and distributed evenly to the old, then the price level will be a constant. When everyone is perfectly informed, the price level will be proportional to the money supply. Thus, with perfect information there are no price rigidities as defined here: a once and for all increase in the money supply will lead to a proportional increase in the price level and employment and production will be tmchanged. Price rigidities arise as a result of limits on information that prevent a realization of the money stock from being revealed to both the young and the old. The mechanism for limiting information is that trading takes place in two distinct markets. Then an increase in the price in one of the markets can signal either (1) that the money stock has increased, in which case there is a general increase in all prices and no need to change production, or (2) that there are fewer suppliers in the market and that the relative price has increased, in which case it makes sense to increase production. Hence, with limited information about the source of the price rise, suppliers must solve a signal extraction problem; the solution to the problem is to increase supply when the price rises, but by an amount that is less than the increase in the money supply. The response of prices to the increase in the money supply depends on the relative variability of money supply changes and market specific shocks. Thus, in this case there is a price rigidity: the price level rises by less than the increase in the money supply and production increases. 3.1.1. Empirical tests"
Lucas (1973) provided the first test of this model; he looked at the price-output behavior in several countries and found evidence that an increase in the variability of the general price level tended to raise the response of prices to changes in aggregate
Ch. 15: Staggered Price and Wage Setting in Macroeconomics
1023
demand as predicted by the theory. Later, Ball, Mankiw and Romer (1988) provided further support. For example, in a sample of 43 countries Ball, Mankiw and Romer (1988) find a significant negative relationship between the response coefficient of real output to aggregate nominal demand shocks (a more general measure of demand than the money supply) and the variability of nominal demand. Soon after the Lucas model appeared, Barro (1977) endeavored to test the theory by empirically distinguishing between unanticipated and anticipated changes in money, finding that the effects of unanticipated money were larger, as predicted by the theory. Barro's study triggered an enormous amount of research and debate about whether anticipated money had any effect at all. Because his tests could not completely distinguish between limited information models and other models with rational expectations (such as the ones discussed later in this paper) that also predicted a difference between expected and unexpected money, questions were raised about the relationship between his test and the Lucas theory. See Mishkin (1982) for a good summary and econometric assessment of this debate. Three types of empirical results, however, raised questions about market clearing models with imperfect information as an explanation of the impact of money on the economy. First, contrary to the theory, actual measures of mis-perceived changes in money had little impact on production; Barro and Hercowitz (1980), for example, provided evidence for this by comparing preliminary and revised data on the money supply in the USA; the difference between the preliminary and the revised data was taken as a measure of mis-perceived money. One can question the Barro-Hercowitz method as taking the Lucas model too literally - clearly many people are unaware of the money supply even after it is revised. Perhaps a better test of the spirit of the model would use a more general measure of aggregate demand as in Ball, Mankiw and Romer (1988). Nevertheless, the information limitations assumed in the Lucas model do seem strong without direct evidence for their existence. A second empirical result that raised questions about the market-clearing approach with limited information, is that unanticipated changes in prices seem to explain only a small fraction of the changes in production over the business cycle, again contrary to the causal mechanism of the model when taken literally. Sargent (1976), for example, showed that unanticipated changes in prices had little effect on production using data for the USA. However, like the Barro-Hercowitz tests, these tests may focus too much on the details of the Lucas model and not enough on its more general implications. For example, in models with sequential purchase restrictions [such as Lucas and Woodford (1994) and Eden (1994b)], an unanticipated increase in demand causes an increase in sales without an immediate increase in prices to signal more production. A third empirical shortcoming relates to the persistent effects of a money shock on real output. In market-clearing limited information models, the duration of the effect of a money shock on real output is no longer than the time it takes to resolve the uncertainty about the source of the shock. It is unlikely that such information would take longer than a few months let alone longer than a year to obtain. Hence, without adding other sources of persistence the market-clearing models with limited
1024
J.B. Taylor
information have difficulty explaining a key fact about the money, real output, inflation relationship. To be sure, it is possible to add in such persistence effects through adjustment costs or inventories, but doing so leaves other aspects of the business cycle - such as the reverse dynamic cross correlations between inflation and output discussed in the introduction - unexplained. It is because of these difficulties in explaining persistence, in my view, that most estimated economy-wide monetary models do not utilize the perfectly flexible-price, market-clearing, assumption, even with limited information. In any case, there has been relatively little research in recent years on imperfect information as a source of price rigidities in models with perfectly flexible prices. However, for reasons discussed below it is likely that a complete theory of price rigidities will eventually involve elements of the limited information theory, though perhaps in conjunction with the staggered wage and price setting formulations discussed below. One rationale for infrequent price changes stems from the information value that a stable price conveys to customers. Moreover, as discussed below, the microeconomic foundations of the staggered contracts models - and in particular why staggering even exists - involves imperfect information about whether a shock is temporary or permanent or local or economy-wide.
3.2. Expected-market-clearing models Soon after the Lucas (1972) model appeared, several researchers began to try to incorporate some form of sticky price or wage formation directly into rational expectations macro models, as an alternative to the imperfect information approach. This research originally had two objectives. The first objective was to develop new econometric models that could be used for monetary policy evaluation. That existing econometric models with adaptive expectations and arbitrary lag structures were inadequate for this purpose was shown clearly in the Lucas (1972) paper and even more transparently in Lucas's (1976) critique paper, which showed, using the example of the output-inflation tradeoff, the pitfalls of doing monetary policy evaluation without paying careful attention to expectations and the reactions of agents in the model. In order to overcome these pitfalls it was clear that a model with rational expectations was needed. If one had doubts about the ability of the imperfect information theory to explain fully the impact of monetary policy on the economy, then a sticky price formulation was a good alternative. Its long tradition in macroeconomics (among both monetarists and Keynesians) and the hope that it could help explain the persistence effects of monetary shocks as well as the impulse effects made it attractive. The second objective was to respond to the work of Sargent and Wallace (1975) which showed that, under Lucas's (1972) imperfect-information assumption with perfectly flexible prices, monetary policy had no effect - the so called "policy ineffectiveness proposition". Thus, the second objective of the research on sticky prices was to demonstrate that this proposition was due to the flexible price assumption rather than to the rational expectations assumption. Another approach to explaining
Ch. 15: Staggered Price and Wage Setting in Macroeconomics
1025
the real effects of money in rational expectation models with perfectly flexible prices assumes that people must learn about monetary policy during a "transition" to rational expectations [Taylor (1975), Brunner, Cukierman and Meltzer (1980)]. Models with learning have developed considerably in the 1980s and 1990s as discussed in the chapter by Evans and Honkapohja (1999) in this Handbook. Incorporating sticky prices or wages directly into an economy-wide rational expectations model meant assuming that prices or wages are set in advance of the market period when they apply and then are fixed at that level during the market period. For example, automobile firms might set their price pt for the quarter t at the start of quarter t - 1 and then keep the price at that value throughout the market period. Or firms might set the wage wt for year t at the start of period t - 1 and set the wage Wt+l for the year t + 1 at the start of period t, and so on. To make this model operational in an internally consistent rational-expectations model of the economy, one might assume that prices or wages are set in such a way that markets are expected to clear during the period in which the price or wage applies. If we let St(pt) represent supply in period t and Dt(pt) represent demand in period t, then expected market clearing simply means that the price pt which is set in period t - j is chosen so that Etq(St(pt)) = Et-j(Dt(pt)),
(3.1)
where Et_j is the conditional expectation given information through periods t - j . This is the approach taken by Fischer (1977), Gray (1976) and Phelps and Taylor (t977) to incorporate price and wage rigidities into economy-wide models. In applying this approach Phelps and Taylor (1977) focussed on the aggregate price level; they assumed that firms set prices one period in advance so that expected aggregate demand for goods (a negative function of the price level) equals expected aggregate supply. Fischer (1977) and Gray (1976) assumed that wages were set in advance in an analogous fashion with the price level perfectly flexible. They assumed that the wage was set so that the expected quantity of labor supplied equaled the expected quantity of labor demanded. In other words, in the Fischer and Gray models the wage is set in advance and D and S refer to the economy-wide labor market during the period when the wage applies, while in the Phelps and Taylor (1977) model prices are set in advance and D and S refer to the aggregate goods market during the period when the price applies. This is also the approach taken in more recent work by Cho (1993), Cho and Cooley (1995), and Rankin (1998) to incorporate price or wage rigidities into real business cycle models, though the D and S functions in these models are far more complex than in the relatively simple macro models in which price and wage rigidities were inserted in the mid-1970s. When setting prices or wages, agents in the model are assumed to make forecasts of supply and demand conditions in the future. Because the forecasts of supply and demand depend on the price in the next period, it is possible to find a price so that the expected quantity supplied equals the expected quantity demanded as shown in Equation (3.1). This price is the expected equilibrium price level; it is this value
1026
J.B. Taylor
which is assumed to be set in advance of the market period and then not changed. Actual supply and demand conditions will differ from these expected values because of unforeseen shocks. But because the price is fixed, the actual quantity demanded will not equal the actual quantity supplied - hence there is an excess demand or excess supply. The convention is then simply to assume that the quantity demanded determines the supply. For example, firms are assumed to supply whatever is demanded at the fixed price for that period. In the meantime the price is set for the next period and the model proceeds through time. Of course, this expected-market-clearing mechanism describing how the price is determined is not necessarily a realistic description of how firms actually set prices, no more than the standard market-clearing assumption in perfectly flexible-price models is meant to be a realistic description of how firms actually set prices. In the equilibrium models, it is hoped that the market-clearing approach gives good predictions and so it is with the "expected equilibrium" models. One advantage of this approach to sticky prices or wages is that the longrun neutrality of monetary policy is always preserved, a point first emphasized by McCallum (1982) in an earlier survey. However, there is a serious disadvantage: the expected-market-clearing approach provides no explanation of the persistence of monetary shocks. The persistence caused by this type of sticky wage or price mechanism could last no longer than the longest lead time for wage and price setting. Recall that the review of the studies of wage and price setting in the previous section showed that the average duration of nominal wages and prices was no longer than one year. Yet the persistence of money shocks lasts well beyond one year. In other words, the expected-market-clearing approach has the same empirical shortcoming as the market-clearing approach, and trying to remedy these shortcomings by introducing other sources of persistence leads to a counterfactual implication for the inflation and output dynamics. It was in trying to apply the expected-market-clearing approach in constructing an estimated econometric model that I realized how serious this disadvantage was. The empirical problem with such a formulation was that real output jumped back to the full employment level much too quickly and sharply after a money shock. I found that in building an empirical model I could not use the expected-market-clearing formulations that had proved useful in building the simple theoretical models of Phelps and Taylor (1977), Gray (1976), or Fischer (1977). It is interesting that Yun (1994, Chapter 2) had a similar experience when endeavoring to introduce sticky prices into an empirical real business cycle model; he found that setting a price for a single market period in advance could lead to no longer persistence than the length of the longest lead time in price setting, and for this reason he eventually adapted to an alternative approach used prior to the development of real business cycles - a version of the staggeredprice-setting approach described in the next section. In retrospect, it is interesting to observe that the persistence problems of the expected-market-clearing models with prices or wages set in advance are similar to those of the market-clearing model with perfectly flexible prices and limited
Ch. 15.. StaggeredPrice and Wage Setting in Macroeconomics
1027
information. The persistence of a shock to money would not last beyond the length of the longest lead time for price setting or beyond the longest time for learning the source of an observed shock to aggregate demand.
4. Staggered contracts models The staggered price and wage setting approach focuses on the nature of the price or wage decision itself, asking what would be a reasonable way to describe how prices and wages are set in different circumstances. Many of the general observations about real world price and wage setting described in Section 2 guide the formulation. These general observations include: (1) Wage and price setting appears to be staggered or unsynchronized; not everyone sets prices or wages in the same period. (2) Wages and prices are set at fixed values for fairly long periods of time (frequently called a "contract" period) and are frequently, though not always, non-contingent on events that occur during the contract period. Wage changes occur annually for many workers but the length of time varies and is not a fixed time length in many instances. Because price or wage setting is staggered these contract periods overlap with each other - hence, the term "staggered contracts". (3) When setting prices or wages, firms find that other prices and wages in the economy, or at least in closely related markets, are relevant for their decisions; this is true both for competitive markets and for markets where price setters have a degree of market power. 4.1. A simple price setting model
The staggered contract model developed in Taylor (1979a, 1980a) was explicitly designed to have these features; it is a simple model of price or wage setting designed to highlight certain key properties of real-world price and wage setting. The equations are essentially the same for wage setting and price setting. Consider the case of price setting. In the basic model prices are set for a fixed number (N > 1) of periods and are not changed during the length of this N-period "contract period". Each period, 1/N of the firms change their "contract prices". At any moment of time, the prevailing price would be an average of the N outstanding contract prices determined in the current and the last N - 1 periods. When setting the current price, firms would take account of both future and past price decisions of other firms because these would be part of the prevailing price. Thus the equations have both forward-looking and backwardlooking terms which are implied automatically from elementary considerations about how prices are set. These staggered contract equations had the feature that there is no long-run trade off between inflation and unemployment: regardless of the steadystate inflation rate the unemployment rate would equal the natural rate, although this property requires that future prices are not discounted when setting today's price, a property that may be a good approximation for short contracts of one year or less.
1028
J.B. Taylor
To be concrete, suppose that N = 2, and that Pt is the log of the average price prevailing in period t, xt is the log of the price set in period t to apply to period t and t + 1, and Yt is the log of aggregate real output. Then, the basic staggered price setting model is Pt = 0.5(xt +xt-1),
(4.1)
xt = 0.5(pt + Etp~+l) + ]/Yt + yEtYt+l + et,
(4.2)
where et is a shock to price setting. The first equation states that the current price is the average of the two outstanding "contract prices". Equation (4.2) posits that this contract price will depend on prices prevailing during the contract period and on a measure of total demand in the economy during the two-period contract length. In Taylor (1979a, 1980a) I viewed the role of Yt in this equation as representative of excess demand in the markets during the periods when xt applied, but as discussed below this is only one interpretation. The model can be closed by assuming a simple demand-for-money function such as (rot - P t ) = Yt, where mt is the log of the money supply, and by specifying a stochastic process for the money supply. Suppose for example that mt = rot-1 + th, where t/t and et are serially uncorrelated random variables. Then, by substituting for Yt in Equation (4.2) using the demand for money and then substituting for pt using Equation (4.1) one can easily derive an autoregressive moving average process for Yt in which the autoregressive parameter (the coefficient onyt_~) is a = e - (e 2 - 1)-J , where c = (1 + ]/)(1 - •)-1 and the moving average terms depend on the shocks to money and the price-setting equation. The autoregressive parameter a is inversely related to the parameter y. For small y, the parameter a will be large and there will be a lot of persistence. Hence, 7 is a key parameter. The autoregressive part of the process for Yt arises because the price xt set by one firm partly depends on the price xt-1 set at other firms - as can be seen by substituting Equation (4.1) into (4.2). Because of the autoregression, a shock to the money supply has a long drawn out effect on output and the price level. The autoregressive term is analogous to a dynamic multiplier and for this reason I used the term "contract multiplier" to describe this persistence effect. This autoregressive component is why the effect on output lasts much longer than the length of the longest contract (2 periods here). West (1988) and Phaneuf (1990) showed with more detailed models and data from the USA and other countries, that the persistence could be large enough to explain the near unit-root behavior that had been associated with real business cycle models. In other words they showed that near unit-root behavior was consistent with a monetary theory of the business cycle with relatively short-lived staggered prices and wages. Moreover, as I showed in Taylor (1980b), there is also a pattern of reverse dynamic cross correlations implied by this model in which a higher level of real output is followed by a higher price level, while a higher price level is followed by a lower level of real output - in other words real output Granger-causes the price level (positively)
Ch. 15." Staggered Price and Wage Setting in Macroeconomics
1029
while the price level Granger-causes real output (negatively). This reverse correlation is found in the data from many countries as reported in Taylor (1980b) and mentioned in the introduction to this chapter. Hence, even this highly stylized model is capable of explaining key facts of the dynamic relation between money, output, and the price level. Note, however, that these facts pertain to the behavior of the price level rather than the rate of inflation, an important issue to which I will return in the discussion o f inflation persistence below.
4.2. More general staggered wage- and price-setting models Given the heterogeneity of wage- and price-setting structures summarized in Section 2, it is likely that the simple uniform-length staggered contract structure in Equation (4.1) would have to be generalized for empirical work to describe a world with a multiplicity of contracts of different lengths. For example, rather than have all prices or wages change every N periods, one could have a range of contracts of lengths N I , N2, N3 . . . . . representing different types of price- or wage-setting arrangements. Thus some prices would be set for a relatively long period of time while others would usually change more frequently. One way to represent such a model is to generalize Equation (4.1) as
Pt = Z
~,xt-,,
(4.3)
s=0
which is drawn from Taylor (1979b); Equation (4.2) can also be generalized in an analogous fashion with ~ weights replacing 1/N or 1 in the case o f N = 2. In the special case where ar0=a~ =0.5 and the rest of the a~'s are zero, Equation (4.3) reduces to Equation (4.1), the two-period price-setting case. Alternatively, if there were an equal number of prices with durations of one through four quarters, then the a~ weights would decline linearly. In the next several sections, I consider versions of Equation (4.3) that have proved useful in research.
4.2.1. Fixed duration models In a series of empirical studies [Taylor (1979b, 1983, 1993a)] I used the general formulation (4.3) in several different ways, none of which restricted the parameters to any special stylized case such as Equation (4.1). This allowed for a general frequency distribution of different contract lengths: some workers and firms would set their price or wage each quarter, others every two quarters, others every year and so on. In Taylor (1979b) I estimated the ~ weights using aggregate wage data for the USA. I assumed a flexible functional form for the pattern of the Jr weights in order to reduce the number of parameters - the functional form allowed the frequency of contract length to increase, reach a peak, and then decrease. By estimating the parameters of that distribution, I was able to infer the distribution of contract lengths in the USA. In Taylor
1030
JB. Taylor
(1983) I calibrated the ~ weights using union wage data in the USA; the observed contract distribution varied in length from 4 quarters to 12 quarters. The resulting model was then used to simulate different disinflation paths for the USA to follow to bring the inflation rate down from the high levels of the late 1970s and early 1980s. Finally, in an estimated multicountry model [Taylor (1993a)] I estimated implied distributions of contract length for the largest seven industrialized countries, with the allowance of more synchronization in Japan, where observation of the wage setting process suggested there would be synchronization. (These estimates were discussed in the section on indirect observations of wage setting above.) Blanchard (1983, 1987) significantly extended the idea of unsynchronized price and wage setting to a complete stage-of-process model in which the price of inputs affects the price of outputs which then affects the price of an input to another firm and so on. The process of passing through price changes at each stage of production generates staggered price setting with the dynamics depending on the input-output structure of the economy. Hence, this provides another way to calibrate, or at least interpret, staggered price- and wage-setting models. Gordon (1981) also places great emphasis on stage-of-process effects in models of aggregate price dynamics. Christiano's (1985) extension of the staggered price and wage setting model also proved useful. He allowed for adjustment of contracts more frequent than the time interval for data collection and estimation. For example, Christiano's generalization could be used to estimate a model in which some contracts last only one quarter, but the data are annual. Using this approach Christiano was able to improve the goodness of fit of the simple staggered contract model. Buiter and Jewitt (1981) generalized the staggered contract model to allow wage setters to take the real wages of other workers into account rather than nominal wages. They showed that this change preserved many of the dynamic properties of the basic model, but allowed for additional effects because different price indices might be relevant for workers and firms. This is especially relevant in international economics where distinguishing between consumer and producer prices allows one to consider the important implications of exchange-rate pass-through. 4.2.2. Random duration models
Calvo (1982, 1983) developed a simple, but useful, version of Equation (4.3) by assuming that the Jr weights had a simple geometric form: Jr~. = a ~' for a < 1. Calvo's original suggestion was to convert the staggered contract model to continuous time and thus assume an exponential distribution. Moreover, Calvo (1982) provided a stochastic interpretation of the staggered contracts model: in his words "we basically adopt the same assumptions [as the standard staggered contracts model] except, to simplify the mathematics, we suppose that contract length is stochastic and independent and identically distributed across contracts" rather than described by a fixed distribution of contracts of different lengths. Calvo (1982) suggested that the equations could be interpreted as implying that the contracts ended randomly according to a geometric (or
Ch. 15: Staggered Price and Wage Setting in Macroeconomics
1031
exponential) distribution, thereby leading to a random duration version of staggered wage setting. To complete the geometric version of the staggered price-setting model, Calvo generalized Equation (4.2) as in Taylor (1979b). Levin (1989, 1991) proposed a more general version of the random duration model in which the frequency distribution of contracts is not necessarily exponential. He estimated the distribution for the USA and found it to be significantly different than geometric with one-year wage setting intervals more common than shorter intervals. The stochastic interpretation implies that firms or workers will randomly change prices, which might seem less realistic than the assumption that the price changes occur at a typical time each year, such as in the spring. Backus (1984) and Chadha (1987) found the geometric assumption useful in discrete time empirical formulations, but Levin (1991) and Benabou and Bismut (1987) found that the distribution of contracts is not generally geometric. Hence, the simple geometric assumption should probably be used with caution in empirical work. 4.2.3. State-dependent duration models
The exogeneity of the price- and wage-change intervals in both the fixed and random-duration staggered price-setting models has been one of their most criticized assumptions. Making the price change or contract termination decision endogenous is important for policy or empirical work, especially if exogeneity is a poor approximation. Fortunately, a number of recent studies have begun to develop models in which the duration of price and wage decisions depends on the state of the economy; this approach is called state-dependentpricing. In contrast the simple staggered priceand wage-setting model is called time-dependentpricing because prices change at fixed or randomly selected times. Caplin and Spulber (1987) developed a widely-discussed model in which all prices are completely state dependent; that is, there is no explicit dependence on time as in the staggered contract models. With state-dependent pricing each firm is faced with fixed costs of price adjustment and uses an (S, s) policy to determine whether the price will change and by how much [see Sheshinski and Weiss (1988) for more on (S, s) policies in price adjustment]. Because not every firm will change its price in every period the resulting pattern of price adjustment looks just like staggered timedependent pricing. However, Caplin and Spulber (1987) find the switch from pure time-dependent pricing to pure state-dependent pricing greatly reduces the effects of staggered wage and price setting on the macroeconomy. In particular they find that money can be completely neutral in such a model. The reason is that if all price setters are following a (S, s) policy, with a wide enough band, then they can all change prices by the full amount of a monetary shock as soon as the shock appears. In contrast with the time-dependent pricing in the staggered price-setting model discussed above, some firms will not change their price so that the aggregate price level adjusts slowly. Tsiddon (1991, 1993) shows that slow aggregate price adjustment and the nonneutrality of money reappear if the changes in the money supply are highly persistent or
1032
J.B. Taylor
have large swings. In such cases the size of the firm's price change is reduced leading to smaller changes in the aggregate price than the money supply. Conlon and Liu (1997) show that if firms change prices in response to other things than price misalignment (a product upgrade, a new model or a new product mix), then the nonneutrality of money reappears. Essentially this change results in a mixture of time-dependent and state-dependent pricing, a situation which probably better reflects reality than either extreme. An important recent application of state-dependent pricing is found in a general equilibrium model developed by Dotsey, King and Wolman (1996), who modified the geometric staggered contract framework of Calvo (1982) to allow for state-dependent pricing. In the Dotsey, King and Wolman (1996) model the fraction of firms that are changing their prices in any one period increases when the inflation rate rises. This prediction of the model is supported by many of the papers surveyed in Section 2. An important advantage of the Dotsey, King and Wolman (1996) paper is that they embed state-dependent pricing into an economy-wide model and preserve some degree of time dependence. They find that the money, output, and price dynamics resulting from their state-dependent model are not too dissimilar from the dynamics of the purely time-dependent model discussed above. Another example of state-dependent pricing is the model of Caballero and Engel (1993). Like the Caplin and Spulber (1987) model, only a fraction of prices will be adjusted each period in the Caballero and Engel model. Thus staggered price setting emerges. However, Caballero and Engel (1993) assume that the probability that an individual price will adjust depends on both the size and the sign of the deviation of the price from some desired price. Caballero and Engel (1993) look at the implications of their model for time-series behavior of the aggregate price level focussing on the producer price index. The detrended log of the index itself is described by a second-order vector autoregression with coefficients of 1.68 and -0.76. The Caballero and Engel (1993) model with its emphasis on first-order adjustment has difficulty mimicking this humped-shape behavior implicit in a second-order process, but at least the model generates the persistence or stickiness of the aggregate price levels found in the pure time-dependent staggered contract model.
5. Bolstering the theoretical foundations of staggered contracts models
As described above in Section 4.1, the basic staggered contract model was constructed to be consistent both with certain observed features of price- and wage-setting behavior and with basic microeconomic principles about the operation of competitive or imperfectly competitive markets. In particular, the idea that the price and wage decisions of firms depend on the prevailing prices and wages - and thus on the price and wage decisions at other firms - is an essential characteristic of staggered wage- and price-setting equations. In a sense these equations endeavor to describe a price discovery process in markets with posted prices, much like the equilibrium
Ch. 15.. StaggeredPrice and WageSetting in Macroeconomics
1033
of supply and demand equations is a description of price discovery in spot markets. Davis and Holt (1997) have noted the development of price rigidities in experimental markets with posted prices and it is likely that experimental economics will help improve on current formulations of staggered wage and price setting. Nevertheless, the price- and wage-setting mechanism in the original staggered contract models was not derived from an explicit maximization problem, and this lack of a formal optimization underpinning is a potential disadvantage that many researchers have pointed out. Fortunately, many studies over the years have provided a more solid microfoundation for these equations. 5.1. Deriving the optimal price: the role of market power Most formal derivations of price determination take as given either (1) the cost of adjusting price, or (2) the fixed (or possibly random) interval for setting the price. Subject to this constraint an optimal value of the price to maximize profits can be found. Arrow (1959) first pointed out the need for some degree of market power to make the price decision of a firm meaningful. He outlined a possible framework in which even competitive firms had a temporary degree of market power at the time of the price decisions. Prescott (1975) also outlined a model of price setting in which firms had some degree of market power, but the market is essentially competitive in that the efficiency conditions of competition hold. Models in which firms have market power - due usually to a monopolistic competition assumption - so that an optimal price can be calculated are used frequently in studies of price and wage rigidity. In an early paper on this subject, Rotemberg (1982) assumed that firms face an explicit cost of adjusting prices, a cost that depends on the size of the price change. He also assumed that each firm faces a downwardsloping demand curve. These assumptions enabled him to derive a price-setting rule in which the actual price level adjusts slowly toward the optimal monopoly price. Rotemberg (1982) originally used this approach as an alternative to staggered price setting, but Rotemberg (1987) and Roberts (1995) show that the cost of price-level adjustment model leads to very similar equations as staggered contract models. In two influential papers, Svensson (1986) and Blanchard and Kiyotaki (1987) developed complete macroeconomic models in which monopolistic competition plays a role in determining the optimal price for firms. These models incorporate money formally and can be used to show the impact of a change in aggregate demand rising from changes in the money supply. In their original form, the Svensson (1986) and Blanchard and Kiyotaki (1987) models were static and were not addressed to the problems of persistence or dynamic cross correlations that are the main subject of this review. 5.2. Towards dynamic optimizing models of staggered price and wage setting Blanchard and Fischer (1989) developed a dynamic model that could address such issues. The model combines monopolistic competition with staggered price setting.
1034
JB. Taylor
The combination is achieved in two steps. The first step is to find the optimal price from a monopolistically competitive model without staggered price setting, such as Svensson (1986) or Blanchard and Kiyotaki (1987). For example, a typical optimal pricing rule would say that the price should depend on the average of other monopolistically competitive firms prices (p) and on a constant times aggregate output (y), which would represent a demand shift. A linear version of such a rule would look like x = p + yy,
(5.1)
where x is the firm's price, p is the average of other firms prices, and y is aggregate output. Now, suppose that pricing is staggered with 2 period contracts so that the price xt must last for two periods: t and t + 1. Then it seems reasonable that firms would set their price to be the average of the optimal price during the two periods during which the price applies. This reasoning leads to the second step which sets xt = 0.5(pt + YYt) + 0.5(Et lPt+l + ]/Et-lYt+l).
(5.2)
Note that Equation (5.2) is identical in functional form (ignoring the random shock) to Equation (4.2). Hence, pricing under monopolistic competition gives a more formal underpinning of the staggered price setting model. However, now the role of y is to shift firms' demand functions rather than to serve as a measure of (excess) demand pressure in the market. Blanchard and Fischer then went on to describe various persistence properties when Equation (5.2) is imbedded in a model. Because Equation (5.2) is identical to Equation (4.2), the properties are identical to those I discussed above. Romer (1996) presents a very useful textbook treatment of this type of derivation of the staggered price setting equation, providing useful details of the derivations and fin'ther discussion. Rotemberg's (1987) derivation of a staggered price setting mentioned above is similar to the one of Blanchard and Fischer (1989) described here, except that rather than using the example in Equation (4.2) he uses the version of Equation (4.2) with geometric declining weights on future p's and y's as in Calvo's (1982) geometric version of the staggered contracts model [see the discussion following Equation (4.3)]. Although the above derivation of the staggered price setting equations provides a helpful microeconomic interpretation, it is still not a fully optimizing treatment. In work that began in the mid-1980s, Akerlof and Yellen (1991) developed a dynamic model in which Equation (4.2) or (5.2) emerged directly from a monopolistic competition model without the two steps described above. They showed how the simple staggered contract equations could be derived from a maximization problem in which monopolistically competitive firms interact. Consider a simple two-firm model in which each firm faces a downward-sloping demand curve and thus has a degree of market power. The demand curve depends on real income in the economy, its own price, and the price charged by its rival. (The
Ch. 15: StaggeredPriee and WageSetting in Macroeeonomics
1035
process determining real income is left unspecified, but is eventually related to the money supply as in other models.) One firm sets prices in even periods and the other firm sets prices in odd periods. The prices are fixed at the same nominal value for two periods. The rival firm can be thought of as a monopolistic competitor that sets a constant nominal price every other period. Akerlof and Yellen (1991) show that if each firm chooses a price to maximize expected profits taking as given (1) the price set by the rival firm (a Bertrand price setter) and (2) income in the economy, then the optimal price is given by the simple staggered price setting model in Equations (4.1) and (4.2). To get linearity in the decision rule, Akerlof and Yellen (1991) approximate the profit function by a quadratic. 5.3. Staggered price and wage setting in general equilibrium models
Although Akerlof and Yellen (1991) derived staggered price- and wage-setting equations from first principles, they did not endeavor to embed the equations in a fully optimizing model of the economy - that is, a model that includes utility functions for representative households. During the late 1980s and 1990s there has been a great amount of research aimed at doing just that. Nelson (1997) provides an excellent review of the most recent part of this research, but some discussion of earlier work is useful too. In one of the earliest studies along these lines, Deborah Lucas (1985, 1986) developed a full optimizing model in which some prices are determined in spot markets and some are determined in contract markets. The prices in spot markets are determined in the usual market-clearing way. The wage contracts are assumed to last two periods; 50 percent of the contracts are set in odd periods and the other 50 percent are set in even periods. The contract specifies a fixed nominal wage for two periods: the current period and the next period. Interestingly, Lucas (1985, 1986) developed a wage-setting mechanism for the contracts in competitive markets, so that the results do not depend on the market power of firms. The terms of the contract are determined in a market-clearing fashion. As stated by Lucas (1986), "In the process of competing for the N workers available to a given sector, the economy equilibrates so that the marginal utility gained from the wages paid over the contract period equals the marginal disutility of labor over the contract period". Note that this approach to modeling wage determination in the contracts is analogous to that used in the optimal contract literature [see Azariadis (1975)]; it is different from both the monopolistic competition assumption and the expected-market-clearing approach mentioned above. Deborah Lucas (1985, 1986) used a cash-in-advance approach to money demand and has prices set for two periods, with decisions being made every other period. Simulations demonstrated the effect of the nominal rigidities on the effect of monetary policy. In her model, the amplitude of cycles was proportional to the fraction of markets with wage contracts compared with spot pricing. Levin (1989, Chapter 2 and 1990) also developed an optimizing model in which wages are set in a staggered manner and determined optimally. Levin also obtained estimation and policy results. He estimated the model using maximum likelihood
1036
JR Taybr
methods and US data. He then stochastically simulated the model to derive optimal feedback rules for monetary policy, and calculated the tradeoff between output stability and price stability. Because the parameters of Levin's model were estimated he could obtain quantitative estimates of the policy rule and the policy tradeoff. Yun (1994, 1996) developed a general equilibrium model with staggered price setting, both with a fixed and random duration. Because Yun uses monopolistic competition, his analysis of staggered price setting has similarities to that of Blanchard and Fischer (1989) above, but it is not a two-step approach. Staggered pricirrg equations of the form (5.2) emerge from the optimization problem without requiring that one first find the optimal price without staggering and then inserting that price into the basic staggered price-setting equations. A difference in the resulting equations is that prices in furore periods are discounted relative to current prices; that is (pt + Yyt) would get a larger weight than (Et lPt+1 + yEt lYt+l) in Equation (5.2) because the firms' profits in the second period would be discounted. Yun's approach shows explicitly how the single price in a staggered price-setting model must balance out profits in different periods because the price cannot be at different levels in different periods. Kimball (1995) discusses several results that emerge when he places formally derived staggered price-setting equations in a general equilibrium model. Kimball (1995) noted that the parameters of the resulting equations may give less persistence than earlier estimated staggered price-setting models (for reasons similar to those mention in my discussion of Blanchard and Fischer) and discussed several factors that could lengthen persistence that have proved useful in later work. In commenting on Kimball (1995), Woodford (1995) gives a nice comparison of the Yun (1994, 1996) and Kimball (1995) models. Compared to other research in this area, the work by King and Wolman (1996) focusses more explicitly on policy analysis. King and Wolman (1996) develop a utility maximization model with price and wage rigidities. Like Deborah Lucas (1985, 1986), Levin (1989), and Yun (1994) they add price rigidities to the model, using a staggered price-setting model. Money enters their model through a transactions technology device in which monetary services allow for higher levels of consumption. As with Levin (1989) and Deborah Lucas (1985, 1986), money has a real effect in the model because of the nominal rigidities. King and Wolman (1996) examine inflation targeting procedures and other important issues in the design of monetary policy rules. By the mid-1990s there were also a number of papers that added other forms of price and/or wage rigidities to a general equilibrium model. Hairault and Portier (1993), Kim (1995), and Ireland (1997) used a quadratic cost of price adjustment approach as suggested by Rotemberg (1982), while Cho and Cooley (1995) assumed that prices were set in advance in such a way that the overlapping features of staggered price setting would not play a role in producing persistence. Other work in this general area has been motivated by various policy, empirical, and methodological issues and includes Leeper and Sims (1994), Bernanke, Gertler and Gilchrist (1999), Ohanian and Stockman (1994), Chari, Kehoe and McGrattan (1998), and others. The paper by Chari, Kehoe and McGrattan (1998) raised some puzzles about the ability of staggered
Ch. 15: StaggeredPrice and Wage Setting in Macroeconomics
1037
price and wage equations to deliver persistent dynamics and is taken up along with several responses later in this chapter.
5.4. Explanations of why price and wage setting is staggered
Although based on empirical observations, the staggering of wage and price setting is simply assumed in all the models discussed thus far in this chapter, from Taylor (1979b) through Chaff, Kehoe and McGrattan (1998). Why is price and wage setting staggered? This question has been pursued by many researchers in the 1980s and 1990s and is still the subject of debate. The question goes to the heart of the price discovery process in a market economy and well beyond macroeconomics. Fethke and Policano (1984, 1986) develop a model in which wages must be set several periods in advance and then are fixed without contingencies. The question is whether in such a world the wage settings should be staggered or all occur at one time. Fethke and Policano (1984) proved that staggering is a good way for the economy to adjust to sector-specific shocks. When disturbances are primarily due to relative, as distinct from aggregate, shocks, staggering of decisions is optimal because adjustments of some prices enable the sectors that are locked into fixed wages or prices to partially adjust. Parkin (1986) also shows that the degree of staggering depends on the relative size of aggregate shocks versus sector specific shocks. The analysis of monetary policy in this type of model is considered in Fethke and Policano (1987). They derive a Nash equilibrium where timing of monetary policy intervention and synchronization of contracts are simultaneously decided upon. An entirely different explanation for the existence of staggering comes from informational considerations. Ball and Cecchetti (1988) show that staggering allows firms to obtain information about what is going on in other markets. By observing the price in other markets firms are able to extract information about whether shocks are aggregate or relative. In addition, Ball and Romer (1989) find that there is a more rapid adjustment to sector (idiosyncratic) shocks with staggering. As shown by Ball (1987), these microeconomic advantages are offset, at least in part, by macroeconomic disadvantages of slow aggregate price adjustment, a concept he refers to as "externalities from contract length". Sheshinski and Weiss (1988) consider the question of staggering in oligopolies where timing is endogenous. Lau (1996, 1997) explores the strategic issues between price setters in an oligopoly game. The strategic rationale for staggering was explored by Matsukawa (1986) in the case of wage setting. In a recent paper, Bhaskar (1998) derives endogenous price staggering in a model with heterogeneous firms. Firms within an industry have stronger strategic complementarities than firms in different industries. This results in an equilibrium in which there is synchronization within industries but not across the economy. De Fraja (1993) also utilizes such strategic considerations in a model in which staggered price setting can be endogenous.
1038
J.B. Taylor
5.5. Indexing and optimal contract length A major puzzle in the area of wage and price rigidities is why contracts are fixed in nominal terms for so long. Gray (1978) provided at least part of the answer in a paper on the optimal degree of indexing. In a model in which there are both nominal and real shocks, Gray (1978) showed that it is not optimal to fully index a wage contract to a single variable like the price level. A still unsettled issue is why contracts would not be indexed to all relevant information. Complexity, asymmetric information, and measurement problems must all be part of the answer.
6. Persistence puzzles and possible resolutions A general theme of this chapter is that the assumption of rational expectations and the need for economy-wide modeling has led to more specific models of wage and price rigidity than before the rational-expectations revolution. This greater specificity has led to the formulation of many statistical tests of the price- and wage-rigidity models. Several years ago, Blinder (1994) noted that models of price and wage rigidity have not been tested, saying, "Try to think of even a single case in which a theory of sticky prices has been rejected econometrically". But, while this criticism may apply to prerational-expectations theories, it certainly does not apply to the price- and wage-rigidity models that have arisen since the 1970s. Indeed, the simple representative staggered contract model described in Equation (4.1) is an example of a theory of sticky prices that - at least in that stylized form - was rejected econometrically as early as 1982. In a 1985 survey paper I stated that "Empirical tests of the sticky-price models have not yet been as extensive as the information-based models." [see Taylor (1985)], but they had already begun. Because of the extensive testing of staggered price-setting and other sticky-price models in recent years, it would not be accurate to make that 1985 statement today. Recall first that staggered price- and wage-setting models do explain in broad terms the observations summarized in the introduction of this chapter. For example, many of the serial correlation properties of the aggregate data - including the reverse dynamic cross correlation, the persistent effect of monetary shocks on real output, and the permanent effect of monetary shocks on prices - are all explained by the simple staggered contracts model. More generally, simulations of the impact of monetary policy shocks, summarized in Taylor (1993a), look much like vector autoregressions reported by Christiano, Eichenbaum and Evans (1999). However, when one looks more closely at the properties of the serial correlation, one starts to see discrepancies, which raise interesting puzzles. Most of these discrepancies are related to the ability of the models to explain persistent movements of real output or inflation. In an early paper on testing the staggered price and wage setting model, Ashenfelter and Card (1982) found that the simple staggered contract model was inconsistent with the serial correlation of wages. Levin (1991) has shown, however, that the more general formulations of these
Ch. 15: StaggeredPrice and Wage Setting in Macroeconomics
1039
models such as Equation (4.3) above do pass goodness of fit tests like those proposed by Ashenfelter and Card (1982). Another empirical criticism of the staggered contract model is found in Dezhbakhsh et al. (1984). They argued that the statistical Phillips curve correlations reported in Taylor (1980b) arose after supply shocks, not demand shocks, and that correlations were actually based on forward looking derivatives (differences). While the point about the supply shocks is correct, the more typical statistical Phillips curve correlations would arise if demand shocks were correlated. A related point was made by Phaneuf (1987a,b). He pointed out that uncorrelated demand shocks showed a negative effect after the length of the longest contract. This property can be avoided with serially correlated demand shocks. 6.1. Inflation persistence
A widely discussed econometric problem with the staggered contract model is its apparent inability, without serial correlation or other sources of dynamics, to generate the persistence (or inertia) of inflation observed in the data. For example, Ball (1994) showed how it was possible to reduce inflation without recession - indeed with the right policy to have a boom! Phelps (1978), Taylor (1983), and Abraham (1987) also examined costless disinflations with rational expectations, but they did not relate this finding to empirical defects with the model. Though the inconsistency between these results and the observed costly disinflations can be easily explained by learning or by lack of credibility, the inconsistency raises some doubts about the ability of staggered contracts models with rational expectation to generate inflation persistence. The apparent inconsistency has led some empirical researchers to use a modification, proposed by Fuhrer and Moore (1995a,b), of the staggered contracts model. Fuhrer and Moore (1995a,b) present autocorrelation plots that nicely document some of the difficulties with the ability of the staggered contract model to produce inflation persistence. They show that the cross autocorrelation functions based on actual inflation and output data were not closely matched with the simulations of the basic staggered contract model. Note that the tests reported in Taylor (1980b) mentioned in Section 4 above compared price levels rather than rates of inflation; hence, the reason for one test passing and the other failing. To remedy this problem Fuhrer and Moore (1995a,b) modified the staggered contract model. Rather than current price levels being based on expected future price levels as in the standard staggered contract models, their modified model has current price inflation being based on expected future price inflation. The replacement of levels by rates of change generated a model with inflation persistence rather than simply pricelevel persistence. However, the theoretical foundations of the staggered contract model are based on levels not rates of change [recall the discussion of the derivation by Akerlof and Yellen (1991) above]. To be sure, Fuhrer and Moore motivated their alternative formulation by restating the price decision in "real" terms. To see this most simply, set 7 = et = 0 and replace
1040
J.B. Taylor
rational expectations by perfect foresight in Equation (4.2). Note that after substitution from Equation (4.1) we get xt = 0.5(x,_l +xt+l),
(6.1)
which illustrates how the current contract price depends on future and lagged contract prices. Now suppose that rather than using xt in Equation (6.1) we formulate the price decision in terms of xt - P t , which looks like a "real" price: the current (log) contract price is deflated by the (log) aggregate price. Replacing xt+~ with Xt+s-Pt+s for s = 0, 1 and -1, in Equation (6.1), we get (after some algebraic manipulation) Axt = 0.5(Axt_l + Axt+l),
(6.2)
where Axt = x t - x t 1. Thus, all the properties stated above in terms of price levels are now restated in terms of the inflation rate. However, this definition of the real price effectively deflates by a price that does not apply to the full period (t and t + 1) of the contract price; that is, pt applies to only 1 of the period that xt applies to. Replacing xt in Equation (6.2) with x t - 0.5(pt +Pt+1) may seem to result in a more appropriate real price. Thus, while the Fuhrer-Moore formulation may work in macroeconomic empirical applications, it leaves puzzles about the microfoundations. Rotemberg (1997), in commenting on Fuhrer (1997), argues that there is nothing wrong with appealing to other sources of persistence of inflation within the staggered contracting approach. It is possible, of course, that inflation persistence could be due to serial correlation of money, but since one of the aims of these models is to explain persistence, leaving all the persistence of inflation to exogenous serial correlation is not a completely satisfactory conclusion either. In a recent paper Roberts (1997) re-examines Fuhrer and Moore's (1995a,b) findings. By exploring alternative expectations-formation mechanisms, Roberts (1997) demonstrates that a small amount of"imperfect information" about the determinants of inflation when combined with staggered price setting is enough to explain the observed serial correlation of inflation. In my view, Roberts' (1997) results indicate why it is likely that a full understanding of price and wage rigidities will eventually involve both imperfect information and staggered contracts of some form. Gertler (1981, 1982) developed a model of wage rigidities and wage inertia that is based on imperfect information. Rudin (1987) developed a formal model of staggered price setting in which there are diverse expectations on the part of firms giving rise to a situation where firms' expectations depend on other firms' expectations, and so on. 6.2. Real output persistence
The recent study by Chari, Kehoe and McGrattan (1998) emphasizes another potential persistence problem with the staggered price- and wage-setting model. Their study and the responses it has stimulated nicely illustrate the potential benefits of using dynamic
Ch. 15:
Staggered Price and Wage Setting in Macroeconomics
1041
optimizing models to study wage and price stickiness. As mentioned above, Chari, Kehoe, and McGrattan (1996) place a staggered contracts mechanism into an optimizing model in which price-setting rules are derived assuming monopolistic competition; they assume that money is in the utility function. They then examine the dynamic properties of the model and compare the properties with the staggered contract mechanism when placed in a model with less formal optimization; that is, with Equations (4.1) and (4.2) above. Through a pairwise comparison of the models, they find that, with reasonable parameter values calibrating the optimizing model, they cannot get coefficients on the staggered price setting equations that are large enough to generate empirically realistic serial correlation; they find virtually no persistence beyond the length of the longest contract. In terms of Equation (4.2), the value of 7 they get from their calibration exercise is much too large. Hence, the persistence is much shorter than the kind of persistence that West (1988), Blanchard (1990), and Phaneuf (1990) have found with the staggered contract model. Ascari (1998) develops an optimizing model of staggered wage setting which also implies that the y parameter is way too large. Several interesting papers have already been written in reaction to the findings of Chari, Kehoe and McGrattan (1998). Gust (1997) shows that restricting capital mobility between sectors can increase persistence in the Chari, Kehoe and McGrattan (1998) model. Kiley (1997) and Jeanne (1997) show that increasing the size of real rigidities [in the sense of Ball and Romer (1990)] can increase persistence in the model. A common theme of these papers is that there needs to be some neighborhood effects between price setters, so that one firm pays close attention to the price decision of the next firm and the most recent firm, thereby linking the price decision of one firm to another and causing the persistence effects. Gust's (1997) model illustrates this by tracing out in detail the effects of shocks with and without capital mobility; in his model capital plays a role in affecting the linkage between price decisions in different markets. The Chari, Kehoe and McGrattan (1998) model assumes complete wage flexibility. Alternatively, Erceg (1997) shows how including staggered wage setting along with staggered price setting increases persistence and enables a calibrated optimizing model with staggered contracts to generate the persistence observed in the data. Bergen and Feenstra (1998) introduce a more general functional form for the demand curve facing the monopolistic competitors, which leads to a lower value for 7. The effect of the constant elasticity demand functions on persistence is also noted by Kimball (1995). It is also important to note that Rotemberg and Woodford (1999) and King and Wolman (1998) in a similar type of modeling framework find long persistence of monetary shocks with relatively short price contracts. Rotemberg and Woodford (1999) assume price-setting equations which are geometric after a time delay, thereby coming close to the microeconomic empirical estimates discussed in Section 2 where the most common length of price contracts seems to be about three or four quarters. Rotemberg and Woodford (1999) conclude that their model generates realistic macroeconomic persistence of money shocks. King and Wolman (1998) assume two-period contracts and also generate realistic macroeconomic persistence.
1042
J.B. Taylor
Another possible resolution of the Chari, Kehoe and McGrattan persistence puzzle is that the monopolistic competition model used to derive the price adjustment equation may not be adequate. Recall that Deborah Lucas (1985, 1986) used a competitive contracting mechanism to derive the price rule (actually a wage rule), and found that the impacts of shocks were quite persistent. The inconsistency pointed out in the Chari, Kehoe and McGrattan (1998) study raises issues about monopolistically competitive pricing that need to be investigated further. As Arrow (1959) argued, the market power a firm has when setting its price is temporary and may be quite different thar~ the market power in a full monopolistic competition model. If so, then it is a mistake to tie the price adjustment parameter • to demand-elasticity parameters. As mentioned in the discussion following Equation (4.1) above, prices may be responding to excess demand and not simply be moving along a demand curve as is assumed in the monopolistic model of price setting. Thus, the findings of Chari, Kehoe and McGrattan (1998) may indicate that the monopolistic competition (stationary market power) model may not be sufficient as a microeconomic foundation. 6.3. Changes in stability and nominal rigidity over time
One of the great historical puzzles in monetary economics is why economic fluctuations are smaller now than they were before the World War II. Part of the explanation has been that economic shocks are smaller, perhaps because of better monetary and fiscal policy or perhaps because of other changes in the economy such as dividend policy at firms. Using the staggered contracts model in Equations (4.1) and (4.2), DeLong and Summers (1986) argued that the improved economic performance was the result of a greater degree of price and wage rigidity in the economy. On the other hand, Taylor (1985) argued just the opposite using the same model, but calibrating the average size of the price shocks compared to the average size of the demand shocks: if price shocks are large enough, then greater price and wage rigidity would increase instability because it takes larger swings in real output and employment to offset price shocks. Other explanations for the increased economic stability - such as dividend policy or monetary policy changes - would therefore be needed. As shown in Driskill and Sheffrin (1986) the different views do in fact boil down to whether demand shocks or price shocks are more important. They show analytically that if price shocks are more important, then less rigidity of prices would lead to greater output stability.
7. Concluding remarks on policy applications and future research One of the most important reasons to develop detailed models of wage and price rigidities that explain the effects of money on the economy is to conduct monetary
Ch. 15:
Staggered Price and Wage Setting in Macroeconomics
1043
policy evaluation research. Such policy applications are an appropriate place to conclude this survey for they suggest where future research may be going. Econometric evaluation of monetary policy is now well-established and increasingly used in policy research. The most common strategy is to build and estimate a dynamic econometric model of the economy and then simulate that model with alternative feedback rules for monetary policy. Among the alternative rules, the policy which leads to the best, or at least a reasonably good, outcome is the optimal policy, and presumably the one recommended to policymakers. The general approach was developed by Lucas (1976) building on work by Marschak (1953) and others at the Cowles Commission where the need for structural econometric models for policy was a major motivation for the development of simultaneous equation methods. Improvements in rationalexpectations solution algorithms and estimation techniques have made it possible to perform such policy evaluations in large scale non-linear systems, in which stochastic simulations are essential. Without these newly developed algorithms, the large number of required replications would not be feasible. Examples of the use of econometric models for policy evaluation include Taylor (1979a) and McCallum (1988) which have focussed on small models. In Taylor (1979a) I derived an optimal feedback rule for the money supply in a rational expectations model with staggered price setting. McCallum (1988) simulated policy rules for several different models, including nonstructural models. This research is summarized in the chapter by McCallum (1999) in this H a n d b o o k . More recently it has been possible to carry out such policy simulation exercises in large scale open economy models. These international models incorporate uncovered interest-rate parity assumptions as in the Mundell and Fleming framework as well as staggered price and wage setting, following the lead of Dornbusch (1982). For example, in Taylor (1993a) a multicountry model with rational expectations and staggered wage setting was used to search for good interest rate and/or exchange rate policy rules. Comparative simulations of several other large scale models - many within the rational-expectations, staggered price- and wage-setting framework - are presented in Bryant, Hooper and Mann (1993). Using these results ! suggested a policy rule for monetary policy [Taylor (1993b)], which has been useful for practical monetary policy discussions, illustrating the usefulness of this whole approach to policy. The Federal Reserve Board has developed and started using a new econometric model which incorporates both rational expectations and a form of staggered wage and price setting. As described by Brayton, Levin, Tryon and Williams (1997) the model is used mostly for policy evaluation, including the evaluation of monetary policy rules. More recently researchers such as Rotemberg and Woodford (1997) and King and Wolman (1998) have begun to use estimated or calibrated general equilibrium optimizing models with staggered price setting to evaluate alternative monetary policy rules. Further developments along these lines are bound to be interesting and useful in policy work. For example, what are the policy implications of combining time-dependent pricing with state-dependent pricing as in Dotsey, King and Wolman (1996)?
1044
J.B. Taylor
A n important advantage o f the newer models that include both utility maximization and staggered price setting is that monetary policy can be evaluated using the standard tools o f public finance. Welfare measures such as compensating variations or equivalent variations thus replace cruder quadratic loss functions in terms o f aggregate output or inflation. Rotemberg and Woodford (1999) evaluate the effect o f different monetary policy rules using the welfare function o f the representative agents in their model. They find that the parameters o f the staggered price-setting equations in their model have a significant effect on their welfare calculations. In sum, the form, interpretation, and parameter values o f staggered price and wage setting models are highly relevant not only for explaining the impact o f monetary policy, but also for evaluating its welfare consequences. Understanding these models more thoroughly takes one well beyond macroeconomics into the heart o f the price discovery and adjustment process in competitive and imperfectly competitive markets. Further research on the empirical robustness and microeconomic accuracy o f staggered contracts models is thus both interesting and practically important.
References Abraham, J. (1987), "Income redistribution during a disinflation", Journal of Macroeconomics 9:203521. Akerlof, G.A., and J.L. Yellen (1991), "How large are the losses from rules of thumb behavior in models of the business cycle", in: W. Brainard, W. Nordhaus and H. Watts, eds., Money, Macroeconomics, and Economic Policy:Essays in Honor of James Tobin (MIT Press, Cambridge, MA). Arrow, K. (1959), "Toward a theory of price adjustment", in: M. Abramovitz et al., The Allocation of Economic Resources: Essays in Honor of Bernard Francis Haley (Stanford University Press, Stanford, CA). Ascari, G. (1998), "Optimizing agents, staggered wages and persistence in the real effects of money shocks", unpublished paper (University of Warwick). Ashenfelter, O., and D. Card (1982), "Time series representations of economic variables and alternative models of the labor market", Review of Economic Studies 49:761-781. Azariadis, C. (1975), "Implicit contracts and underemployment equilibria", Journal of Political Economy 83:1183-1202. Backus, D. (1984), "Exchange rate dynamics in a model with staggered wage contracts", Discussion Paper No. 561 (Queen's University, June). Ball, L. (1987), "Externalities from contract length", American Economic Review 77:615 629. Ball, L. (1994), "Credible disinflation with staggered price setting", American Economic Review 84: 282-289. Ball, L., and S.G. Cecchetti (1988), "Imperfect information and staggered pricing", American Economic Review 78:99%1018. Ball, L., and D. Romer (1989), "The equilibrium and optimal timing of price changes", Review of Economic Studies 56:179-198. Ball, L., and D. Romer (1990), "Real rigidities and the nonneutrality of money", Review of Economic Studies 57:183-203. Ball, L., N.G. Mankiw and D. Romer (1988), "The new Keynesian economics and the output-inflation tradeoff", Brookings Papers on Economic Activity 1988(1):1 65. Barro, R.J. (1977), "Unanticipated money growth and unemployment in the United States", American Economic Review 67:101-115.
Ch. 15:
Staggered Price and Wage Setting in Macroeconomics
1045
Bah'o, R.J., and Z. Hercowitz (1980), "Money stock revisions and unanticipated money growth", Journal of Monetary Economics 6:257-267. Benabou, R., and C. Bismut (1987), "Wage bargaining and staggered contracts: theory and estimation", Discussion Paper No. 8810 (CEPREMAP, Paris, France). Bergen, ER., and R.C. Feenstra (1998), "Staggered price setting and endogenous persistence", Working Paper No. 6429 (NBER). Bernanke, B.S., M. Gertler and S. Gilchrist (1999), "The financial accelerator in a quantitative business cycle framework", ch. 21, this Handbook. Bhaskar, V. (1998), "On endogenously staggered prices", University of St. Andrews Discussion Paper Series, No. 9806 (St. Andrews, Scotland). Blanchard, O.J. (1983), "Price asynchronization and price level inertia", in: R. Dornbush and M. Simonsen, eds., Inflation, Debt, and Indexation (MIT Press, Cambridge, MA) 3-24. Blanchard, O.J. (1987), "Aggregate and individual price adjustment", Brookings Papers on Economic Activity 1987(1):57-122. Blanchard, O.J. (1990), "Why does money affect output? A survey", in: B. Friedman and E Hahn, eds., Handbook of Monetary Economics (North-Holland, Amsterdam) 779-835. Blanchard, O.J., and S. Fischer (1989), Lectures on Macroeconomics (MIT Press, Cambridge, MA). Blanchard, O.J., and N. Kiyotaki (1987), "Monopolistic competition and the effects of aggregate demand", American Economic Review 77:647-666. Blinder, A. (1994), "On sticky prices: academic theories meet the real world", in: N.G. Mankiw, ed., Monetary Policy (University of Chicago Press, Chicago, IL) 117-150. Blinder, A.S., E.D. Canetti, D.E. Lebow and J.B. Rudd (1998), Asking About Prices: a new approach to understanding price stickiness (Russell Sage Foundation, New York). Brayton, E, A. Levin, R. Tryon and J.C. Williams (1997), "The evolution of macro models at the Federal Reserve Board", in: B.T. McCallum and C.I. Plosser, eds., Carnegie-Rochester Conference Series on Public Policy 47:43 81. Brunner, K., A. Cukierman and A.H. Meltzer (1980), "Stagflation, persistent unemployment, and the permanence of shocks", Journal of Monetary Economics 6:467-492. Bryant, R.C., E Hooper and C.L. Mann (1993), Evaluating Policy Regimes: New Research in Empirical Macroeconomics (Brookings Institution, Washington, DC). Buckle, R.A., and J.A. Carlson (1995), "Price duration with two-sided pricing rules", in: K.H. Oppenlander and G. Poser, eds., Business Cycle Surveys: Forecasting Issues and Methodological Aspects (Avebury, Aldershot) 99-118. Buiter, W., and I. Jewitt (1981), "Staggered wage setting with real wage relatives: variations on a theme of Taylor", The Manchester School 49:211-228. Caballero, R.J., and E. Engel (1993), "Microeconomic rigidities and aggregate price dynamics", European Economic Review 37:691-711. Calvo, G.A. (1982), "Staggered contracts and exchange rate policy", in: J.A. Frankel, ed., Exchange Rates and International Macroeconomics (University of Chicago Press, Chicago, IL). Calvo, G.A. (1983), "Staggered prices in a utility maximizing framework", Journal of Monetary Economics 12:3-398. Caplin, A.S., and D. Spulber (1987), "Menu costs and the neutrality of money", Quarterly Journal of Economics 102:703-725. Card, D., and D. Hyslop (1997), "Does inflation 'grease the wheels of the labor market'?", in: C. Romer and D. Romer, eds., Reducing Inflation (University of Chicago Press, Chicago, IL) 71-114. Carlton, D.W (1986), "The rigidity of prices", American Economic Review 76:637~558. Carlton, D.W. (1989), "The theory and the facts of how markets clear: is industrial organization valuable for understanding macroeconomics?", in: R. Schmalensee and R.D. Willig, eds., Handbook of Industrial Organization, vol. 1 (North-Holland, Amsterdam) 909-946. Cecchetti, S.G. (1984), "Indexation and incomes policy: a study of wage adjustment in unionized manufacturing", Journal of Labor Economics, 5:391-412.
1046
J.B. Taylor
Cecchetti, S.G. (1986), "The frequency of price adjustment: a study of newsstand prices of magazines", Journal of Econometrics 31:255-274. Chadha, B. (1987), "Is increased price inflexibility stabilizing?", Journal of Money, Credit and Banking 21:481-497. Chaff, VV, EJ. Kehoe and E.R. McGrattan (1998), "Sticky price models of the business cycle: can the contract multiplier solve the persistence problem?", Research Department Staff Report No. 217 (Federal Reserve Bank of Minneapolis) revised April 1998. Cho, J.O. (1993), "Money and business cycles with one period nominal contracts", Canadian Journal of Economics 26:638 659. Cho, J.O., and T.E Cooley (1995), "The business cycle with nominal contracts", Economic Theory 6:13-33. Christiano, L.J. (1985), "A method for estimating the timing interval in a linear econometric model, with application to Taylor's model of staggered contracts", Journal of Economic Dynamics and Control 9:363-404. Christiano, L.J., M. Eichenbaum and C.L. Evans (1999), "Monetary policy shocks: What have we learned and to what end?", ch. 2, this Handbook. Conlon, J.R., and C.Y. Liu (1997), "Can more frequent price changes lead to price inertia? Nonneutralities in a state-dependent pricing context", International Economic Review 38:893-914. Davis, D., and C.A. Holt (1997), "Price rigidities and institutional variation in markets with posted prices", Economic Theory 9:63-80. De Fraja, G. (1993), "Staggered versus synchronized wage setting in oligopoly", European Economic Review 37:1507-1522. DeLong, J.B., and L.H. Summers (1986), "Is increased price flexibility stabilizing?", American Economic Review 78:1031-1044. Dezhbakhsh, H., A.A. Haug, J.H. McCulloch, G.S. Poonia and L.-T. Wang (1984), "The statistical Phillips Curve in Taylor's staggered contracts model", unpublished paper. Domberger, S., and D.G. Fiebig (1993), "The distribution of price changes in oligopoly", The Journal of Industrial Economics 41:295-313. Domowitz, I., R.G. Hubbard and B.C. Petersen (1986), "Business cycles and the relationship between concentration and price-cost margins", Rand Journal of Economics 17:1-17. Dornbusch, R. (1982), "PPP exchange rate rules and macroeconomic stability", Journal of Political Economy 90:158-165. Dotsey, M., R.G. King and A.L. Wolman (1996), "State dependent pricing and the dynamics of business cycles", unpublished paper. Driskill, R.A., and S.M. Sheffrin (1986), "Is price flexibility destabilizing?", American Economic Review 76:802 807. Durra, S., M. Bergen and D. Levy (1997), "Price flexibility in channels of distribution: evidence from scanner data", unpublished paper ( Emory University, September 14). Eden, B. (1994a), "Time rigidities in the adjustment of price to monetary shocks: an analysis of micro data", Discussion paper No 94.16 (Bank of Israel). Eden, B. (1994b), "The adjustment of prices to monetary shocks when trade is uncertain and sequential", Journal of Political Economy 102:493-409. Erceg, C. (1997), "Nominal wage rigidities and the propagation of monetary disturbances", unpublished paper (Federal Reserve Board). Evans, G.W, and S. Honkapohja (1999), "Learning dynamics", oh. 7, this Handbook. Fethke, G., and A. Policano (1984), "Wage contingencies, the patterns of negotiation and aggregate implications of alternative contract structures", Journal of Monetary Economics 14:151-170. Fethke, G., and A. Policano (1986), "Will wage setters ever stagger decisions?", Quarterly Journal of Economics 101:867-877. Fethke, G., and A. Policano (1987), "Monetary policy and the timing of wage negotiations", Journal of Monetary Economics 19:87-105.
Ch. 15." Staggered Price and Wage Setting in Macroeconomies
1047
Fischer, S. (1977), "Long-term contracts, rational expectations, and the optimal money supply rule", Journal of Political Economy 85:191~05. Fregert, K., and L. Jonung ( 1986), "Monetary regimes and file length of wage contracts", paper presented at the 1986 Konstanz Conference. Friedman, M. (1982), Column, p. 64, Newsweek, July 12. Fuhrer, J.C. (1997), "Towards a compact, empirically-verified rational expectations model for monetary policy analysis", in: B. McCallum and C. Plosser, eds., Carnegie-Rochester Conference on Public Policy 47:197-231. Fuhrer, J.C., and G.R. Moore (1995a), "Monetary policy tradeoffs and the correlation between nominal interest rates and real output", American Economic Review 85:219-239. Fuhr'er, J.C., and G.R. Moore (1995b), "Inflation persistence", Quarterly Journal of Economics 110: 127-159. Gertler, M. (1981), "Long-term contracts, imperfect information, and monetary policy", Journal of Economic Dynamics and Control 3:197-216. Gertler, M. (1982), "Imperfect information and wage inertia in the business cycle", Journal of Political Economy 90:967-987. Goodfriend, M., and R.G. King (1997), "The new neoclassical synthesis and the role of monetary policy", in: B.S. Bernanke and J.J. Rotemberg, eds., NBER Macroeconomics Annual (MIT Press, Cambridge, MA) 493 530. Gordon, R. (1981), "Output fluctuations and gradual price adjustment", Journal of Economic Literature 19:493-530. Gray, J.A. (1976), "Wage indexation: a macroeconomic approach", Journal of Monetary Economics 2:221~35. Gray, J.A. (1978), "On indexation and contract length", Journal of Political Economy 86:1-18. Gust, C. (1997), "Staggered price contracts and factor immobilities: the persistence problem revisited", unpublished paper (Northwestern University). Hairault, J.-O., and E Portier (1993), "Money, new Keynesian macroeconomics, and the business cycle", European Economic Review 37:1533 1568. Ireland, EN. (1997), "A small structural quarterly model for monetary policy evaluation", CarnegieRochester Conference Series on Public Policy 47:83-108. Jeanne, O. (1997), "Generating real persistent effects of monetary shocks: how much nominal rigidity do we really need?", Working Paper No. 6258 (NBER). Kashyap, A.K. (1995), "Sticky prices: new evidence from retail catalogues", Quarterly Journal of Economics 110:245-274. Kiley, M.T. (1997), "Staggered price setting, partial adjustment, real rigidities, and sunspots", unpublished paper (Federal Reserve Board). Kim, J. (1995), "Monetary policy in a stochastic equilibrium model with real and nominal rigidities", unpublished paper (Yale University). Kimball, M.S. (1995), "The quantitative analysis of the basic neomonetarist model", Journal of Money Credit and Banking 27:1241-1277. King, R.G., and A.L. Wolman (1996), "Inflation targeting in a St. Louis model of the 21st century", Federal Reserve Bank of St. Louis Review 78:93-107. King, R.G., and A.L. Wolman (1998), "What should the monetary authority do when prices are sticky", in: J.B. Taylor, ed., Monetary Policy Rules (University of Chicago Press, Chicago, IL). Lach, S., and D. Tsiddon (1992), "The behavior of prices and inflation: an empirical analysis of disaggregated data", Journal of Political Economy 100:349-389. Lach, S., and D. Tsiddon (1996), "Staggering and synchronization in price-setting: evidence from multiproduct firms", American Economic Review 86(December): 1175 1196. Lau, S.H.E (1996), "Aggregate pattern of time-dependent adjustment rules I: a game-theoretic analysis of staggered versus synchronized wage setting", Economic Journal 106:1645-1658.
1048
J.B. Taylor
Lau, S.H.R (1997), "Aggregate pattern of time-dependent adjustment rules II: strategic complementary and endogenous nonsynchronization", Working Papers in Economics and Econometrics, No. 317 (The Australian National University, January). Lebow, D.E., D.J. Stockton and W. Wascher (1995), "Inflation, nominal wage rigidity and the efficiency of labor markets", unpublished paper (Federal Reserve Board). Leeper, E.M., and C.A. Sims (1994), "Toward a modern macroeconomic model usable for policy analysis", in: S. Fischer and J.J. Rotemberg, eds., NBER Macroeconomics Annual (MIT Press, Cambridge, MA) 81-118. Levin, A. (1989), "The theoretical and empirical relevance of staggered wage contract models", Ph.D. Dissertation (Stanford University). Levin, A. (1990), "Monetary stabilization policy in a general equilibrium model with wage contracts", Working Paper No. 90-hyphen;43 (University of California at San Diego, December). Levin, A. (1991), "The macroeconnmic significance of nominal wage contract duration", Working Paper No. 91-08 (University of California at San Diego, February). Levy, D., M. Bergen, S. Dutta and R. Venable (1997), "The magnitude of menu costs: direct evidence from large U.S. supermarket chains", Quarterly Journal of Economics 114:791-825. Levy, D., S. Dutta, M. Bergen and R. Venable (1998), "Price adjustment at multiproduct retailers", Managerial and Decision Economics, forthcoming. Lucas, D.J. (1985), "Price and interest rate dynamics induced by multiperiod contracts", Working Paper (Northwestern University). Lucas, D.J. (1986), "Rigid wages as a transmission mechanism for monetary shocks", Working Paper (Northwestern University). Lucas Jr, R.E. (1972), "Expectations and the neutrality of money", Journal of Economic Theory 4: 103-124. Lucas J1; R.E. (1973), "Some international evidence on output inflation tradeoffs", American Economic Review 63:326-334. Lucas Jr, R.E. (1976), "Econometric policy evaluation: a critique", Carnegie-Rochester Conference Series on Public Policy 1:19-46. Lucas Jr, R.E. (1996), "Nobel lecture: monetary neutrality", Journal of Political Economy 104:661 682. Lucas Jr, R.E., and M. Woodford (1994), "Real effects of monetary shocks in an economy with sequential purchases", Working Paper No. 4250 (NBER). Marschak, J. (1953), Economic Measurement for Policy and Prediction, Studies in econometric method, CoMes Commission for Research in Economics, Monograph No. 14 (Yale University Press, New Haven, CT). Matsukawa, S. (1986), "The equilibrium distribution of wage settlements and economic stability", International Economic Review 27:415-437. McCallum, B.T. (1982), "Macroeconomics after a decade of rational expectations: some critical issues", Federal Reserve Bank of Richmond Economic Review 68:3-12. McCallum, B.T. (1984), "A linearized version of Lucas's neutrality model", Canadian Journal of Economics 17:138-145. McCallum, B.T. (1988), "Robustness properties of a rule for monetary policy", Carnegie-Rochester Conference Series on Public Policy 29:173-203. McCallum, B.T. (1999), "Issues in the design of monetary policy rules", ch. 23, this Handbook. McLaughlin, K.J. (1994), "Rigid wages?", Journal of Monetary Economics 34:383-414. Mishkin, F.S. (1982), "Does anticipated monetary policy matter? an econometric investigation", Journal of Political Economy 90:22-51. Montgomery, E. (1983), "A note on aggregate dynamics and staggered contracts: a test of the importance of spillover effects", Working paper 82-6 (Carnegie Mellon School of Urban and Public Affairs). Nelson, E. (1997), "A framework for analyzing alternative models of nominal rigidities", unpublished paper (Carnegie Mellon University).
Ch. 15:
Staggered Price and Wage Setting in Macroeeonomics
1049
Ohanian, L.E., and A.C. Stockman (1994), "Short run effects of money when some prices are sticky", Federal Reserve Bank of Richmond Economic Review 80:1~3. Okun, A.M. (1981), Prices and Quantities: A Macroeeonnmic Analysis (Brookings Institution, Washington, DC). Parkin, M. (1986), "The output-inflation tradeoff when prices are costly to change", Journal of Political Economy 94:200-224. Phaneuf, L. (1987a), "Can contract-based models explain business cycles?", working paper (University of Montreal). Phaneuf, L. (1987b), "Propri6t6s dynamiques des modules du cycle/t contrats echelonn6s", Canadian Journal of Economics 20:123-139. Phaneuf, L. (1990), "Wage contracts and the unit root hypothesis", Canadian Journal of Economics 23:580-592. Phelps, E. (1978), Disinflation without recession: adaptive guideposts and monetary policy, Weltwirtschaftliches Archiv 114:783 809. Phelps, E., and J.B. Taylor (1977), "Stabilizing powers of monetary policy under rational expectations", Journal of Political Economy 85:163-190. Prescott, E.C. (1975), "Efficiency of the natural rate", Journal of Political Economy 83:1229 1236. Rankin, N. (1998), "Nominal rigidity and monetary uncertainty", European Economic Review 42: 185-199. Roberts, J.M. (1995), "New Keynesian economics and the Phillips curve", Journal of Money, Credit and Banking 27:975 984. Roberts, J.M. (1997), "Is inflation sticky?", Journal of Monetary Economics 39:173-196. Romer, D. (1996), Advanced Macroeconomics (McGraw-Hill, New York). Rotemberg, J.J. (1982), "Sticky prices in the United States", Journal of Political Economy 90:1187-1211. Rotemberg, J.J. (1987), "The new Keynesian foundations", in: S. Fischer, ed., NBER Macroeconomics Annual 1987 (MIT Press, Cambridge, MA) 69 104. Rotemberg, J.J. (1997), "A comment", Carnegie-Rochester Conference Series on Public Policy 47: 231-243. Rotemberg, J.J., and M. Woodford (1997), "An optimization-based econometric framework for the evaluation of monetary policy", in: B.S. Bernanke and J.J. Rotemberg, eds., NBER Macroeconomics Annual (MIT Press, Cambridge, MA). Rotemberg, J.J., and M. Woodford (1999), "The cyclical behavior of prices and costs", ch. 16, this Handbook. Rotwein, E., ed. (1955), David Hume's Writings on Economics (University of Wisconsin Press, Madison, WI). Rudin, J. (1987), "Diverse expectations in an empirical model: an extension of the staggered contracts model", Chapter 2 of "Diverse expectations: policy and empirical implications", Ph.D. Dissertation (Stanford University). Sargent, T.J. (1976), "A classical maeroeconomic model for the United States", Journal of Political Economy 84:207-237. Sargent, T.J., and N. Wallace (1975), "'Rational' expectations, the optimal monetary instrument, and the optimal money supply rule", Journal of Political Economy 83:241-254. Sheshinski, E., and Y. Weiss (1988), "Staggered and synchronized price polices and multiproduct monopolies", Working paper No. 24-78 (Foerder Institute for Economic Research, Tel-Aviv, July). Slade, M.E. (1996), "Optimal pricing with costly adjustment: evidence from retail-grocery prices", unpublished paper (University of British Columbia). Stigler, G., and J. Kindahl (1970), The Behavior of Industrial Prices, NBER General Series, No. 90 (Columbia University Press, New York). Stock, J.H., and M.W. Watson (1999), "Business cycle fluctuations in US macroeconomic time series", ch. 1, this Handbook.
1050
JB. Taylor
Svensson, L.E.O. (1986), "Sticky goods prices, flexible asset prices, monopolistic competition, and monetary policy", Review of Economic Studies 52:385~405. Taylor, J.B. (1975), "Monetary policy during a transition to rational expectations", Journal of Political Economy 83:1009-1021. Taylor, J.B. (1979a), "Estimation and control of an econometric model with rational expectations", Econometrica 47:1267 1286. Taylor, J.B. (1979b), "An econometric business cycle model with rational expectations: some estimation results", unpublished paper (Columbia University); condensed version reprinted in chapter 2 of Taylor (1993a). . Taylor, J.B. (1980a), "Aggregate dynamics and staggered contracts", Journal of Political Economy 88:1-22. Taylor, J.B. (1980b), "Output and price stability: an international comparison", Journal of Economic Dynamics and Control 2:109-132. Taylor, J.B. (1983), "Union wage settlements during a disinflation", American Economic Review 73: 981-993. Taylor, J.B. (1985), "Rational expectations models in macroeconomics", in: K. Arrow and S. Honkapohja, eds., Frontiers of Economics (Basil Blackwell, Oxford). Taylol, J.B. (1986), "Improvements in macroeconomie stability: the role of wages and prices", in: R.J. Gordon, ed., The American Business Cycle. Continuity and Change (University of Chicago Press, Chicago, IL). Taylor, J.B. (1993a), Macroeeonomic Policy in the World Economy: From Econometric Design to Practical Operation (W.W. Norton, New York). Taylor, J.B. (1993b), "Discretion versus policy rules in practice", Carnegie-Rochester Conference Series in Public Policy 39:195-214. Tsiddon, D. (1991), "On the stubborness of sticky prices", International Economic Review 32:69-75. Tsiddon, D. (1993), "The (mis)behavior of the aggregate price level", Review of Economic Studies 60:889-902, Warner, E.J., and R. Barsky (1995), "The timing and magnitude of retail store markdowns: evidence from weekends and holidays", Quarterly Journal of Economics 110:321-352. West, K.D. (1988), "On the interpretation of near random-walk behavior in GNP", American Economic Review 78:202-209. Woodford, M. (1995), "Comment on the quantitative analysis of the basic neomonetarist model", Journal of Money, Credit and Banking 27:1277-1284. Yun, T. (1994), "Monetary policy, nominal price rigidity and business cycles", Ph.D. Dissertation (Department of Economics, University of Chicago). Yun, T. (1996), "Nominal price rigidity, money supply endogeneity, and business cycles", Journal of Monetary Economics 37:345-70.
Chapter 16
T H E C Y C L I C A L B E H A V I O R OF P R I C E S A N D C O S T S JULIO J. ROTEMBERG Harvard Business School MICHAEL WOODFORD Princeton University
Contents
Abstract Keywords 1. Introduction: Markups and the Business Cycle 2. The cyclical behavior of markups 2.1. Cyclical behavior of the labor share 2.2. Corrections to the labor-share measure of real marginal cost 2.2.1. A non-Cobb-Douglas production function 2.2.2. Overhead labor 2.2.3. Marginal wage not equal to the average 2.2.4. Costs of adjusting the labor input 2.2.5. Labor hoarding 2.2.6. Variable utilization of capital 2.3. Alternative measures of real marginal cost 2.3.1. Intermediate inputs 2.3.2. Inventory fluctuations 2.3.3. Variation in the capital stock 2.4. The response of factor prices to aggregate shocks 2.5. Cross-sectional differences in markup variation
3. Implications of markup variations for business fluctuations 3.1. Explaining cyclical variation in productivity and profits 3.1.1. Cyclical productivity 3.1.2. Cyclical profits 3.2. Identifying the output fluctuations due to markup variation
4. Models of variable markups 4.1. Sticky prices 4.2. Variations in desired markups 4.2.1. Varying elasticity of demand 4.2.2. Customer markets Handbook of Macroeconomics, Volume 1, Edited by J.B. Taylor and M. Woodford © 1999 Elsevier Science B.V All rights reserved 1051
1052 1052 1053 1057 1058 1064 1064 1065 1069 1072 1076 1079 1081 1081 1084 1086 1086 1092 1093 1094 1094 1100 1104 1112 1113 1119 1119 1120
1052
J.J Rotemberg and M. Woodford
4.2.3. Implicit collusion 4.2.4. Variableentry 4.3. Interactionsbetween nominal rigidities and desired markup variations 5. Conclusions Acknowledgment References
1123 1125 1126 1129 1131 1131
Abstract
Because inputs are scarce, marginal cost is an increasing function of output. Diminishing returns, costs of increasing employment as well as the increasing marginal disutility of working when hours worked and effort rise all contribute to make this function steep. Without changes in this function relating marginal cost to output, aggregate output can vary if and only if the markup of price to marginal cost (the inverse of real marginal cost for typical filmS) varies. We first study whether, empirically, real marginal cost does rise in cyclical expansions. Average real labor cost is not very procyclical but, for several reasons, marginal labor cost is more procyclical than average labor cost. These include the presence of overhead labor and adjustment costs as well as differences between the marginal and the average wage. These corrections results in procyclical measures o f real marginal cost. Measures of marginal costs based on materials costs and inventories also appear procyclical. We show that these procyclical movements in marginal cost may, depending on how costs are modeled, account for a substantial fraction of cyclical output movements. Finally, we survey models of variable markups. These include both models of sticky prices (in which markups vary because firms cannot all costlessly charge the markup they desire) and models in which firms' desired markup varies over time. This set of models allows a rich set of variables to affect output even if these variables do not shift the marginal cost schedule.
Keywords JEL classification: E3, D4, D3
Ch. 16: The Cyc~calBehaviorofPr~es and Cos~
1053
1. Introduction: Markups and the Business Cycle In this chapter, we consider the role of variations in the relationship between the prices at which goods are supplied and the marginal cost o f supplying them in accounting for observed fluctuations in economic activity and employment. We shall argue that there exists a great deal of evidence in support of the view that marginal costs rise more than prices in economic expansions, especially late in expansions. Thus real marginal cost (MC/P) rises, for the typical firm; and alternatively, the markup of price over marginal cost (which we shall define as the ratio P/MC 1) declines for the typical firm. These two ways of describing the feature of business cycles with which we are concerned are equivalent in the case of a symmetric equilibrium (in which the costs, output and prices of all goods move exactly together), though they are not equivalent propositions regarding an individual firm or industry in the asymmetric case (since the firm's or industry's relative price may vary). Because of our concern with the explanation of fluctuations in aggregate activity, and because such aggregate fluctuations are characterized by a striking degree of comovement among sectors, we will mainly conduct our analysis in terms of a symmetric (aggregative) model, and treat procyclical movements in real marginal cost as equivalent to countercyclical markup variations. Discussion of the cyclicality of real marginal cost is most natural when one is discussing measurement (since the crucial measurement issue is to infer the level of marginal costs), and so this is how the issue is framed in many empirical studies [such as Bils (1987) and Bils and Kahn (1996)]. But when we turn to theoretical explanation, it is most useful to describe the phenomenon in terms of variation in firms' markups, because the crucial decisions responsible for the phenomenon are firms' decisions about the prices at which they are willing to supply their products. In fact, in a broad class of models discussed below, the cyclicality of real marginal costs in equilibrium turns not upon the nature o f the production technology or the conditions under which firms can obtain factors of production, but upon the nature of the competition among firms in their product markets; and so, from an analytical point of view, it seems most important to emphasize variation in markups. The observation that costs rise more than do prices, at least late in expansions, is not a new one. It was emphasized in the work of Wesley Clair Mitchell, for example, who writes (1941, p. 52) that as activity expands, "equipment of less than standard efficiency is brought back into use; the price of labor rises while its efficiency falls; the cost of materials, supplies and wares for resale advances faster than selling prices; discount rates go up at an especially rapid pace, and all the little wastes incidental to the conduct of business enterprises grow steadily larger." That real marginal costs should rise for such reasons is, of course, a simple consequence of the fact that factors of production are not in unlimited supply. But, as Mitchell notes, from the point of view of
1 Many authors instead define the "markup" or "price-cost margin" as (P- MC)/P. The two quantities are obviouslymonotonic transformations of one another.
I054
JJ Rotembergand M. WoodJord
theory "a problem still remains: Why cannot businessmen defend their profit margins against the threatened encroachment of costs by marking up their selling prices?" As we shall see, a variety of theories of imperfectly competitive behavior by firms explain why they may choose not to do so. Such imperfectly competitive behavior thus plays an important role in accounting for the character of aggregate fluctuations. Fluctuations in markups are an important factor, in our view, for a reason somewhat different than that emphasized by Mitchell. In Mitchell's analysis, the squeezing of profit margins late in booms is what brings the boom to an end, as reduced profitability dampens investment demand and hence sales. This suggests that an improvement in firms' power to set prices above marginal cost would extend the boom. But this neglects the fact that firms cannot all raise their relative prices. Let the marginal cost of each firm i be given by Pc(yi), where Yi is the quantity supplied and P is the general price l