CHAPTER 1
Preparation of Human Chromosomal Painting Probes From Somatic Cell Hybrids Nicoletta Antonino
Archidiacono, ...
23 downloads
1783 Views
38MB Size
Report
This content was uploaded by our users and we assume good faith they have the permission to share this book. If you own the copyright to this book and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Start by pressing the button below!
Report copyright / DMCA form
CHAPTER 1
Preparation of Human Chromosomal Painting Probes From Somatic Cell Hybrids Nicoletta Antonino
Archidiacono, Forabosco,
Rachele Antonacci, and Mariano Rocchi
1. Introduction Chromosomal in situ suppression (CISS) hybridization with flow-sorted chromosome libraries (FSCL) has provided a very powerful tool in human cytogenetics. This technique allows the painting of specific chromosomes in metaphase spreads and in interphase nuclei (1-4). The usefulness of FSCL is particularly evident, for instance, in identifying the chromosomal origin of de ltovo unbalanced translocations and marker chromosomes, or, more generally, m characterizing those cytogenetic cases in which the conventional approach based on bandmg techniques fails to elucidate the chromosomal rearrangement under study (5,6). These situations are frequently experienced in cancer cytogenetics (7,8). Painting libraries of human origin have also been utilized to follow the chromosome evolution of primates (9-11). For example, studies where both chimpanzee chromosomes 12 and 13 were pamted by the human chromosome 2-specific library have confirmed the origin of this human chromosome from the fusion of two distinct ancestral chromosomes still separated in great apes (12). Biotmylated genomic DNA from hybrid cell lines retammg specific human chromosomes has been used directly as a source material for pamtmg purposes (I3,14). However, because human chromosomes represent only a minor component of a human-rodent somatic cell hybrid, the sensitivity of this technique is not always satisfactory (24). Nelson et al. (1.5) have achieved the selective amplification of human DNA present in human-rodent hybrids, using an Alu-derived primer in polymerase chain reaction (PCR) experiments under appropriate stringency conditions (IRS-PCR, or interspersed repetitive sequence-PCR). Labeled IRS-PCR products have been shown to be efficient for painting specific human chromosomes in in situ hybridization experiments (16,17). Ah and LINE sequences, however, are not evenly interspersed in the human genome; their primary distribution correlates with G-negative and G-positive bands respectively (18), so that A/u-PCR products will generate a From Edited
Methods in Molecular Bmlogy, Vol 39 In Sttu Hybrtd&abon Protocols by K H A Choo CopyrIght 01994 Humana Press Inc , Totowa. NJ
1
2
Archidiacono
et al.
banding pattern correspondmg to R-banding (19) The addition to the hybridization mixture of biotmylated IRS-PCR products obtained using Ll primer (20) do not completely elimmate the problem because most inter-L1 DNA segments are out of the amplification range of Taq polymerase. “Holes” produced by painting using these products are particularly evident m the centromerlc regions because of the extreme paucity of Ah or LINE sequences.However, in cases in which the centromeres are involved m rearrangements, centromerlc alphold probes can be successfully utilized instead. Very recently (21), the use of accurately designed dual-Alu primers m PCR amplification has allowed the achievement of more satisfactory painting efflciency and sensitivity of the IRS-PCR technique, which are comparable to the painting performances using FSCL. The IRS-PCR method, however, has an even wider spectrum of applications because it can be used to generate paintmg probes specific for discrete portions of chromosomes (“partial” libraries). Selected examples of these usages will be illustrated in this chapter. 2. Materials 2.1. PCR
1 Alu primers (21): 5’ GGATT ACAGG YRTGA GCCA 3’ (Y = C/T, R = A/G) 5’ RCCAY TGCAC TCCAG CCTG 3’
6 7 8 9.
Store frozen at 100 pmol/pL. Genomic DNA from hybrid (100 ng) in dlstilled water. Store frozen 0 5-mL Test tubes suitable for the thermal cycler. A set of micropipets (P20 and P200, GIlson, Vilhers-le-Bel, France) and stenle tips Reagents for PCR (store frozen). 10X dNTPs mix of 2 mM each, pH 7; 10X reaction buffer (usually comes with the Tuq polymerase); Tuq polymerase (5 U@L), DistIlled water (autoclaved and stored at room temperature); and Light mineral oil Programmable thermal cycler. Agarose, ethldium bromide, gel electrophoresls apparatus, and UV transilluminator Molecular weight marker (Lambda-Hi&III + PhzX-H&II, 50 ng/pL each). TBE buffer: 900 mM Tris-base, 900 mM boric acid, 1 mM EDTA
1 2 3 4 5 6. 7.
2.2. Nick Translation 10X Buffer. 0.5M Tns-HCl, pH 7.8-8.0, 50 mM MgCl*, 0.5 mg/mL BSA. dNTPs mix: 0.5 mM each of dATP, dCTP, and dGTP. Biotin-1 l-dUTP mix: 0 5 m&Z each of dTTP, and blo- 1 I-dUTP Enzymes: DNA polymerase I (5 U&L) and DNase I (2 U/mL). Other chemicals: O.lM P-mercaptoethanol, 0 5M EDTA, and 10% SDS 1-mL Syringes. TE* 10 mM Tns-HCl, pH 7.5, 1 mM EDTA.
2 3 4. 5.
Painting
Probes
From
Hybrids
3
8. G-50 fine Sephadex (Sigma, St. Louis, MO). Add 10 g of Sephadex to 300 mL distilled water. After at least 1 h, change the supernatant with TE. Let decant. Repeat three or four times.
2.3. In Situ Hybridization 1 2. 3 4. 5 6. 7 8 9. 10. 11. 12 13. 14. 15. 16. 17. 18 19 20 21. 22
Human Cot-l DNA (BRL, Bethesda, MD). 1 pg/pL salmon sperm DNA. 3M Na acetate 70, 90, and 100% Ethanol. Savant concentration centrifuge. Formamide and deiomzed formamide. 50% dextran sulfate, autoclaved. 20X SSC (1X SSC = 150 mM sodmm chloride, 15 mM sodmm citrate, pH 7.0). Vortex. Coplin jar. 24 x 24 mm and 24 x 60 mm coverslips. Rubber cement. Washing solution A: 50% formamlde/2X SSC Washing solution B* 0.1X SSC Blockmg solution 3% BSA/4X SSC/O. 1% Tween 20. Detection buffer, 1% BSA/lX SSC/O.l% Tween 20. 1 mg/mL Avidin-FITC (fluorescein rsothrocyanate, Vector Laboratories, Burlingame, CA) Solutron C: 4X SSC/O. 1% Tween 20. If signal amplification is performed: 0.5 mg/mL biotmylated antlbiotm antibody (Vector Laboratories) DAPI (4,6-diamldino-2-phenymdole, Sigma). Propidium iodide (Sigma) Antifade mounting medium. 10 mL: 0 233 g DABCO (1,4-diazabtcyclo-[2.2 21 octane, Sigma), 800 PL distilled water, 200 FL 1M Tris-HCI, pH 8.6, 9 mL glycerol
3. Methods 3.1. Generation of PCR Products from Somatic Cell Hybrids 1. In a 0.5-mL tube (smtable for a thermocycling machine), mix m this order: 1 l.tL DNA from hybrid; 37 2 pL Distilled water; 5 /.tL 10X PCR buffer, 5 PL 10X dNTPs mix; 0.8 l.rL Tuq Polymerase (5 U&L); and 0.5 FL of each primer (1 @Y final concentration), Adjust total volume to 50 pL. Overlay with a drop of light mineral 011. 2. In a second tube, add everythmg as described, except the DNA This serves as a negative control. (If more than one sample is amplified, a master mix can be prepared.)
4
Archidiacono
et al.
3 Run on the thermocycling machine as follows a. 5 min at 94°C. b. 30 cycles 1 min at 94”C, 1 mm at 65”C, 4 min at 72’C c. 10 min at 72°C. 4. Check the amplification products by loading 5+tL ahquots on a 1% agarose gel. Store at 4°C (see Fig. 1). 1.
2 3. 4. 5. 6. 1
2 3. 4.
3.2. Probe Biotinylation by Nick Translation Add to a microfuge tube, on ice. 2 l.rg of amplification products, 10 PL 10X mck translation buffer, 10 pL dNTPs mix; 5 l,tL Biotin mix (see Note 1); 10 pL 0 1M P-mercaptoethanol; Dilute (immediately before use) 1 pL of DNase I m 1 mL distilled water, add 20 lrL to the nick-translation mix. (The DNase I should be cahbrated to give fragments of 100-500 bp, see step 4), 1 5 ~.LLDNA polymerase I, and Sterile distilled water to 100 pL. Incubate at 15°C for 2 h. Place at 4°C until checked on gel Take 5+L aliquot of each sample, add 4 pL Hz0 and 1 pL of 10X gel loading buffer. Run on a 1% agarose gel to check fragment sizes (see Note 2). Stop reaction by adding 4 l.r.L 0.5M EDTA Purify the labeled probe through G-50 Sephadex (see Note 3) 3.3. Probe Denaturation Precipitate 20 ltL labeled DNA (400 ng, see Note 4) with 5 l.rg human Cot-l DNA (see Note 5), 3 pg salmon sperm DNA, 0.8 p.L 3M Na acetate, and 3 vol cold (-20°C) ethanol. Leave at -80°C for 15 min. Spin for 15 min (14,000 rpm) at 4°C Dry the pellet in a Savant centrifuge for a few minutes Prepare hybridization mrx (10 PL per slide). Add to a test tube. 5 ltL of deiomzed formamide, 2 l.tL 50% dextran sulfate, 2 pL disttlled water, and 1 pL 20X SSC If more shdes have to be hybridized, a master mix can be prepared. Resuspend pellet m 10 pL hybridizatton mix by vortexing. Denature DNA mix at 80°C for 8 min Transfer to 37°C for 20 min, then place on ice until use.
3.4. Slide Denaturation 1 Prepare 50 mL denaturing solution (70% deiomzed formamide/2X SSC) Pour mto a Coplin jar. Place m a water bath at 70°C. Check the temperature inside the jar. 2 Prewarm slides at 60°C in dry oven 3. Immerse the slides m the denaturation solution for exactly 2 min, two slides each time. 4 Dehydrate slides m 70,90, and 100% ethanol, 3 mm each time (70% ethanol at -2OT). 5. Dry slides after dehydration.
Painting
5
Probes From Hybrids 1234
567
8
91011
Fig. 1. Samples of Alu-PCR amplification products from 11 different hybrids. The PCR reaction was done in 50 pL vol. Five microliters were run on 1% agarose gel, at 100 V. The marker is lambda-Hid11 + PhiX-HueIII. Amplified fragments range from approx 2 kb to 300 bp. Discrete bands (as in lane 10) are frequently detected in amplified DNA from hybrids that retained a small amount of human cytogenetic material. The run is also informative for a quantitative evaluation of the PCR products, estimated by visual comparison with known amount of the marker. The quantitative evaluation can be better done by inspecting the gel after a few minutes of running, when both marker and the samples appear as compact bands.
3.5. Hybridization 1. Apply 10 pL hybridization mix to denatured slides, avoiding air bubbles. 2. Cover with 24 x 24 mm clean coverslip; seal with rubber cement. 3. Incubate in a moist chamber overnight at 37°C. 3.6. Posthybridization Washing and Detection Do not allow slides to dry at any stage. All washings are done in Coplin jar. 1. Remove coverslips and wash three times for 5 min in prewarmed solution A in a Coplin jar in a shaking water bath at 42°C. 2. Wash three times for 5 min in prewarmed solution B in a water bath at 6O’C. 3. Apply 200 l.tL of blocking solution per slide; cover with a 24 x 60 mm coverslip. Transfer the slides into a moist chamber and incubate for 30 min at 37°C. 4. Dilute stock solution of avidin-PITC (1 mg/mL) 1:300 in detection buffer. Let coverslips slide off; apply 200 p.L detection solution per slide. Cover with 24 x 60 mm coverslips. Transfer the slides into a dark moist chamber and incubate at 37’C for 30 min. 5. Remove the coverslips; rinse the slides three times for 5 min in prewarmed washing solution C in water bath at 42’C. 6. Counterstain with DAPI (200 ng/mL in 2X SSC) (see Note 6) or with propidium iodide (200 ng/mL in 2X SSC), or both.
6
Archidiacono
et al.
7. Rinse for 2 min m 2X SSC/O 05% Tween 20 at room temperature 8. Apply 30 uL of antifade-mounting medium and cover with a 24 x 60 mm coverslip. Slides can be stored for weeks in the dark at 4°C. 9. If necessary, the signals can be amplified as follows: After washing with solution C (as in step 5), dilute 1.100 the blotmylated antibrotin antibody in PBS (0 5 mg/mL). Apply 200 uL to the slide; cover wrth coverslip and incubate in a moist dark chamber at 37’C for 30 min. Repeat washes as in step 5. Then repeat steps 4 and 5 and proceed to step 6. 3.7. Fluorescence
Microscopy
Signals from painted chromosomes are visible usmg an epifluorescence microscope equipped with specific filters for the fluorochromes utihzed. A 50 or 100 W mercury high-pressure lamp is suitable. If a normal photographtc apparatus is used, dual or triple band pass filters are appropriate. Multiple band pass filters generally reduce the amount of light reaching the camera. If a blackand-white cooled CCD (charge coupled device) camera (Photometncs, Tucson, AZ) IS used, filters should be dtstmct for each fluorochrome and aligned, to guarantee an exact merge of images. Cooled CCD cameras are currently the most sensitive device. Signals from painting probes are usually strong enough to be recorded using a conventronal photographic camera. (See Note 7 and Figs. 2 and 3 for examples of the application of the present technique.)
4. Notes 1 Probe labeling can be performed usmg digoxigenm-11-dUTP (Boehringer Mannhetm, Mannhelm, Germany) instead of bto-1 l-dUTP, and revealed by antrdlgoxigenin anttbody conjugated with FITC or rhodamin fluorochromes. This allows the cohybrtdization of two different probes in the same experiment
Fig. 2 (oppostte page) Examplesof pamtmgwith IRS-PCRprobes Dtgnal imageswere obtamedusmga computer-controlledZeissAxioplan epifluorescencemicroscopeequipped with a cooledCCD camera(Photometrics)FITC andDAPI fluorescence,detectedusingspecific filter combmations,were recordedseparatelyas gray scaleimages Imageswere not mergedor pseudocoloredto better showhow they appearedon the microscopeMetaphase spreadswereobtainedfrom PHA-stimulatedperipherallymphocytes On the left (A,C,E) are theimagesobtainedwith DAPI, whichproducesa QM-like banding.Thecorrespondmg hybndtzation signalsof biotmylatedprobes,detectedby avidm-FITC, areon the right (B,D,F) A,B. CISShybridization usmgbiotmylatedAlu-PCRproductsfrom hybrid GM0115,contammgonly the humanchromosome 4 The arrowsmdicatethe chromosome 4 C,D. Hybrid HY 91E contaming the derivative chromosomeYpter + Yql 1 2 17q12+ 17qterthat stainsthe correspondingregionson chromosome 17qandY E,F Hybrid Y XY 8FT7 retainingtheintact human chromosomes 6, 10, and 11 17qter+ 17qll is alsopamtedasa resultof a deletedchromosome17 that wasalsopresentin the hybrid, probablyattachedto a hamsterchromosome
Painting
Probes From Hybrids
8
Archidiacono
et al.
Painting
Probes
From
Hybrids
9
2. Load also a suitable molecular weight marker (such as PhiX-H&II) on the gel Inspect the gel on UV transilluminator: Fragments should be between 100 and 500 bp. If fragments are larger, add more DNase I to the samples, incubate for an additional 30 min, and check again as described. 3. G-50 Sephadex spin columns Take a I-mL syringe, plug the tip with glass wool Place the syringe m a conical tube Fill the syringe with Sephadex Centrifuge at 2000 rpm on a benchtop centrifuge for 2 min Add Sephadex and repeat centrifugation until the Sephadex reach the 1 mL mark. Equilibrate the column by loading 100 PL TE and spmmng as before. The column is equilibrated when the flow through is 100 pL, as loaded. Columns can be sealed with parafdm and stored at +4”C When used after storage, equilibrate again Put a small reaction tube at the bottom of the syringe Add 1 PL 10% SDS to the nick-translation reactions and apply to the column (SDS prevents biotmylated probes from sticking to the column) Spin at 2000 rpm for 2 mm. The labeled probe can be stored frozen for several months 4. Sometimes a particular hybrid may contain many human chromosomes, or a human chromosome may be present only in a low percent of hybrid cells This will produce a famt signal on the desired chromosome(s) To raise the specific signals the amount of labeled IRS-PCR probe should be increased accordingly. 5. Cot- 1 DNA IS added to the hybndlzatlon mixture to suppress cross-hybrichzation of repetitive sequences. Too high level of background signals owing to madequate suppression may be reduced by Increasing the amount of Cot-l DNA m the hybrldizatlon reaction Nonspecific background IS probably a result of highmolecular-weight fragments or Inadequate probe purification 6. Note that DAPI fluorescence intensity correlates inversely with the degree of denaturation of the chromosomes 7 Apphcatlons. Pictures shown m Figs. 2 and 3 are some applications of the IRSPCR technique Figures 2A,B show a CISS hybrldlzatlon experiment of blotmyFig 3 (opposlle page) Further examples of pamtmg with IRS-PCR probes See Fig 2 legend for general explanation Metaphase spreads were from PHA-stimulated peripheral lymphocytes (A,B), or a lymphoblastold cell lme (C-F) A,B: Painting probes derived from hybrid TC4 9, retaining a small chromosomal fragment from Xq28 (see Sectlon 4 7 ) The large arrows point to the X chromosome The small arrows mdlcate an additIona slgnal on chromosome 4, at 4q12 C,D Metaphases were from a female patient carrymg a normal (large arrow) and an abnormal X chromosome (small arrow) A FSCL specific for the X chromosome (see Sectlon 1 ) painted the entlre abnormal chromosome (data not shown) IRS-PCR painting probes were from hybrid RJ 387 91T5 retaining, m addition to chromosome 2, the short arm of the X chromosome E,F Metaphases were from the same patlent as m C,D Probes used were obtained by Alu-PCR of hybrid RJ 83 lF, retammg the long arm of chromosome X and a chromosome 16 Only a small region, near the centromere, of the abnormal X (small arrow) was painted The region comcldes exactly with the region not recognized by hybrid RJ 387 91T5 Correspondmg Images of both normal and abnormal Xs are placed side by side III the Inset El to better show the locatlon of signals. In both metaphases (D,F), the normal X (large arrow) provided an Internal control
10
Archidiacono
et al.
lated PCR products from hybrid GM101 15 (Camden Cell Repository), containing chromosome 4 as the only human contribution. The primary result of the IRS-PCR technique here 1s the fine cytogenetic characterization of the hybrid itself. This is relevant in mapping experiments in which panels of somatic cell hybrids are utilized, .smce human-rodent hybrids are prone to rearrangements Results displayed in Figs. 2C-F were obtained in a search almed to generate chromosome-17 partial libraries that could elucidate the evolutionary origin of gorilla chromosomes 19 and 4, which have been shown to be homologous to human chromosomes 17 and 5 (10) Figures 2C,D show how pa&al painting libraries can be obtamed from hybrids m which a well-characterized derivative chromosome is present. Hybrid HY.91E was obtained by fusmg a TK- hamster cell line with lymphoblasts from a patient (GM6326, Camden Cell Repository) carrymg a balanced translocation t(Y,l7) The HAT selected HY.91E hybrid retained the derlvatlve chromosome Ypter + Yqll 2 17q12 + 17qter As expected, the IRS-PCR products pamted the Yp and 17q12 + 17qter regions (Fig. 2D) The addltional well-defined sIgna present at the tip of X demonstrates the high sensitivity of the technique The signal IS a result of the presence in Xp22 of sequences homologous to Yp. The experiment, m addition, proves that no additional human chromosome material was retained m this hybrid. Figures 2E-F show CISS hybrldlzation of biotmylated PCR products from hybrid Y.XY.8FT7. This hybrid retained human chromosomes 6, 10, and 11 (the characterlzatlon was based on QM-bandmg) Figure 2F shows that the 17qter + 17qll region was also retained in the hybrid, as a consequence of a rearrangement that occurred in vitro This result, however, was not surprising: The search for rearranged chromosomes 17 took advantage of dlscordant results obtained m mapping experiments using a probe that turned out to map on chromosome 17 Hybrid Y.XY 8FT7 was found positive for this probe, but the presence of an intact chromosome 17 was discounted on careful cytogenetlc analysis, therefore the presence of a rearranged chromosome 17 was expected The systematic characterlzatlon of tens of hybrids produced m our laboratory has provided us with several partial pamting libraries, depictmg specific human chromosome portions Figures 3A,B have been obtained using the hybrid TC4 9. Southern blot analysis using X-linked probes showed that only the G6PD and GCP-RCP gene clusters, spanning about 1 Mb, and located at Xq28, were retained (22). Figure 3B shows a clear signal at Xq28, in addition to a second unexpected signal located at 4ql2. The example proves that very small cytogenetlc segments can be easily detected by the IRS-PCR technique. Figures 3C-F report an example of a cytogenetlc case m which the use of partial painting libraries has been essential m the clarification of the rearrangement Classlcai cytogenetic analysis on a female patient with primary amenorrhea revealed an abnormal X chromosome, consistently inactlvated, with a shorter q-arm. The use of an X-specific painting library stained the entire abnormal chromosome X, but did not completely elucidate the nature of the rearrangement We then used two distinct partlal hbranes, specific for Xp and Xq, respectively
Painting
II
Probes From Hybrids C C
C C C C C c---------------------------------
22.33 22.3 22.3 22.3 22.1 22.1
11.2
11 c11.1 c---------------
we----------
----------------------------------c c11.1 -----------------------------
11
-------------------------13 --------------------------------_------__
13.1
21
-c -c
21 21.2 21.32
22.1
-c
C -----c-------------------c---------------
----c--------------
-------c---------------
25 --------------------c--------------26 ----------------------c 26 ----------------------c--------------26 ----------------------c------------------------
26 26 26
- 27 27 ----_------_---------
----------
HY.136C HY.ZZAZAl HY.94BTl HY.Zl.lFT6 HY.105E7 HY.90A HY.92F4 GM10501 HY.lZlBZT5 HY.122A RJ.83.1F HY.73DMT3 HY.llZF7 HY.19.16T3 HY.46BT3 HY.114YBTl HY.134ST3 HY.132H HY.70C3 Y.X6.8B2 Y.X9.15A4 GM10664
HY.129E HY.87Z4 C C C
11 -c
C
HY.85B3 HY.85D30TZ GM10662A GM11099 GM10663 TC4.8 Y.162AZA TC4.9
Fig. 4 A panelof somaticcell hybridsthat retaineda regionof chromosome X. Someof the chromosomes arerearrangedX previouslycharacterizedin the patientsfrom which they were derived. Others representrearrangements that have occurredm vitro and were detectedby chanceon a survey of hybrids generatedin our laboratory.The continuouslinesrepresentthe portionsof the X retamedm the hybrid, C standsfor centromere.
The results showed unequivocally that the abnormal X wascomposedof two Xp (Figs 3C,D) with a small portion of Xq between them (Figs. 3E,F), suggesting that the cytogenetic constitution of the abnormal chromosome was as follows. Xpter + Xql3::Xqll + Xpter. Such a result could not have been achieved using painting libraries that recognize an entire chromosome. A diagrammatic representation of a panel of somatic cell hybrids 1sshown in Fig. 4. In each hybrid, a portion of chromosome X was retained as a consequence of specific selection of a derivative chromosomeor as a consequenceof chromosome X rearrangement, which has occurred m vitro. Their characterization usmg the IRS-PCR technique matched perfectly with molecular characterization using X-linked probesof known locality. We believe that the availability of similar hybrid panels for each of the other human chromosomes will be of great utility m human cytogenetics
12
Archidiacono
et al.
Acknowledgments This work was supported Genetrca” and “Bioingegneria Telethon.
in part by “Progetto e Blostrumentazione”
Fmalizzato Ingegnerla (CNR), by AIRC, and
References 1. Pmkel, D , Landegent, J , Collins, C., Fuscoe, J , Segraves, R , Lucas, J , and Gray, J W (1988) Fluorescence m situ hybridlzatton with human chromosome-specific hbrarres Detection of trisomy 21 and translocatron of chromosome 4 Proc Nat1 Acad. Scr USA 85,9138-9142 2 Lrchter, P , Cremer,T , Borden,J , Manuehdrs,L , andWard, D C (1988)Dehneattonof individual humanchromosomes m metaphase andInterphasecellsby rn situ suppressron hybridization usingrecombinantDNA hbrartesHum Genet 80,224-234. 3 Collms,C., Lm Kuo, W , Segraves,R , Fuscoe,J , Pmkel, D , and Gray, J W (1991) Constructionandcharactertzatronof plasmrdlibrariesenrichedrn sequences from single humanchromosomes Genomrcs11,997-1006 4. VOOIJS,M , Yu, L -C , Tkachuk,D , Pinkel,D , Johnson,D , andGray,J W (1993)Lrbranes for each humanchromosome,constructedfrom sorted-enrrched chromosomes by using linker-adaptorPCR Am J Hum Genet 52,586-597 5. Jauch,A , Daumer,C , Lrchter,P , Murken, J., Schroeder-Kurth,T , andCremer,T (1990) Chromosomal m srtusuppression hybrtdrzattonof humangonosomes andautosomes and its usem climcal cytogenettcsHum Genet 85, 145-150 6. Weier, H U , Lucas,J N , Poggensee, M , Segraves,R., Pmkel,D., andGray, J W (1991) Two-color hybrldizatron with hrghcomplexrtychromosome-specific probesanda degeneratealphasatelliteprobeDNA allowsunambiguous drscrrmmation betweensymmetrical andasymmetricaltranslocattonsChromosoma 100,37I-376 7. Cremer,T., Ltchter, P., Borden,J., Ward, D C , andManuehdts,L. (1988)Detectronof chromosome aberrationsm metaphase andinterphasetumorcellsby m situ hybridrzatron usmgchromosome-spectfic library probesHum. Genet. 80,235-246 8. Gray, J. W and Pmkel, D. (1992) Molecular cytogenetrcsm humancancerdiagnosis Cancer 69,1536-1542
9. Wrenberg,J , Jauch,A, Stanyon,R., andCremer,T (1990)Molecularcytotaxonomy of primatesby chromosomalin situsuppressron hybrrdrzation Genomlcs k&347-350 10 Jauch,A., Wrenberg,J , Stanyon,R., Arnold, N ,Tofanelh, S., Ishrda,T , andCremer,T (1992)Reconstructronof genomtcrearrangements m greatapesandgibbonsby chromosomepamttng.Proc Natl. Acad Sci USA 89,861 I-8615 11. Wrenberg,J , Stanyon,R , Jauch,A, and Cremer,T (1992) Homologresm humanand Macacafuscatachromosomes revealedby m situ suppression hybridization with human chromosome specrftchbrartes Chromosoma 101,265-270 12 Luke, S andVerma, R S (1992)Origin of chromosome 2 Nat, Genet 2, 11,12. 13. Krevits, T , Devrlee, P , Wregant, J , Wapenaar,M. C., Cornelisse,C J , van Ommen, G. J B , and Pearson,P L (1990)Direct nonradroactrvem situ hybrrdrzatronof somattc cell hybridsDNA to humanlymphocytechromosomesCytometry 11, 105-109. 14. Boyle, A. L , Lrchter,P , andWard, D C (1990)Rapidanalystsof mouse-hamster hybnd cell linesby m situ hybrrdrzatron Genomrcs 7, 127-130. 15. Nelson,D. L , Ledbetter,S.A , Corbo,L , Vrctoria, M F , Ramirez-Solis,R , Webster,T D , Ledbetter,D H , andCaskey,C T (1989)Alu polymerasechamreaction.A method for rapid Isolationof humanspecrficsequences from complexDNA sourcesProc Nat1 Acad Scz. USA 86,6686-6690
Painting
Probes
From
Hybrids
I6 Llchter, P , Ledbetter, S , Ledbetter, D , and Ward, D C (1990) Fluorescence tn srtu hybrrdizatton with Alu and Ll polymerase chain reaction probes for raped characterization of human chromosomes m hybrid cell lines Proc Nat1 Acad. Scr USA 87,6634-6638 17 Lengauer,C , Riethman,H , andCremer,T (1990)Paintmgof humanchromosomes wtth probesgeneratedfrom hybrid cell linesby PCRwith Alu andLl primersHum Genet 86,
1-6 18 Korenberg,J R andRykowski, M. C (1989)Humangenomeorgamzatton.Am, LINES andthe molecularstructureof metaphase chromosome bands Cell 53,391-400 19 Baldim,A andWard, D C (1991)In sttuhybrtdrzattonof humanchromosomes wtth AluPCRproductsA simultaneous karyotypefor genemappingstudtesGenomlcs 9,770-774 20 Ledbetter,S. A , Nelson,D. L , Warren,S. T , andLedbetter,D H. (1990)Rapidisolatton of DNA probeswtthm specificchromosome regionsby Interspersed repetitive sequences (IRS) PCR Genomzcs 6,475-48 1 21 Liu, P , Sicihano,J , Seong,D , Craig,J , Zhao,Y , deJong,P J , andSicthano,M J (1993) Dual Alu PCRprimersandcondttionsfor tsolattonof humanchromosome pamtmgprobes from hybrid cell. Cancer Genet Cytogenet. 65,93-99 22 Maestrnn, E andTomolo, D (1992)An archipelagoof CpG islandsin Xq28* Identrfication and fme mappingof 20 newCpG islandsof the humanX chromosomeHum. Mel Genet 1,275280
CHAPTER 2
Fluorescent In Situ Hybridization Using Chromosome-Specific DNA Libraries William
G. Kearns
and Peter L. Pearson
1. Introduction Fluorescent in situ hybridization (FISH) IS a powerful tool to analyze structural chromosome aberrations. The identification of structural abnormalmes by routine and high resolution cytogenetic studies plays an important role in the diagnosis and treatment of disease. However, this analysis is relatively gross and only permits the visual diagnosis of aberrations of single chromosome bands on the order of seven million or so base pan-s. FISH using chromosomespecific DNA libraries (chromosome pamting) permits the identrfication of small chromosome aberrations, which are not readily detected by standard high resolution bandmg techniques. FISH may be used to identify marker chromosomes, clarify balanced or unbalanced translocations, define chromosome duplications, or analyze complex chromosome rearrangements. FISH may be used m prenatal and postnatal cytogenetic studies. This chapter provides a detailed description of the use of FISH to detect chromosome abnormahties, employing chromosome-specific libraries as probes and metaphase chromosomes as target DNA.
2. Materials 2.1. Fluorescent
iMicroscopy
1. Fluorescent microscope: Fluorescent signals produced by painted chromosomes are generally visible using a properly configured fluorescent mmroscope Fluorescent microscopes are designed to collect an optimal signal whtle minimizing background rllumination. Two types of rllummation exist for fluorescence microscopy: transmitted rllumination (1) and incident rllummation (epr-illumrnation) (1). Our laboratory uses an eprfluorescent microscope.
2. Light source: The light source of choice for fluorescence microscopy depends on the desired mode of illumination (e g., epifluorescent), the excitation spectrum of the fluorochromes used, and the sensitivity of the detector (1 e., film, human eye, or CCD camera) required. Tungsten halogen, mercury, and xenon lamps exist. Mercury lamps produce strong emission peaks and m general, are the light source of choice for epifluorescence illuminatton (1) From Edlted
M&hods N) Molecular Bology, by K H A Choo Copyrlght
Vol 33 In Situ Hybnd!zatron Profocols 01994 Humana Press Inc , Totowa, NJ
15
Kearns
16
and Pearson
3 Flourescent stains These are characterrzed by their absorption and emission spectra, which occur at different regions of the light spectrum. The most common fluorescent stains are visualized as blue (DAPI, AMCA), green (FITC, qumacrme), or red (propidium rodrde, rhodamine, Texas red) 4 Proper fluorochrome vtsualizatron requires approprrate obJectives and filter sets The mtcroscope objective acts as both a condenser and ObJective m epi-illummation (1) Oblecttves require a high numerical aperture and a relatively low magmfication. In general, the brrghtness of fluorescent signal is mversely related to the objective magnification (I) of the fluoro5 Filter choice depends primartly on the spectral characteristics chromes used. The mam filter types include excitation, barrier, and drchrorc mirrors (also called a chromatic beam splitter) Excitation filters Isolate a hmrted region of hght, which corresponds to the absorption peak of the fluorochrome Various sources exist for excitation filters that have high transmrssron narrow band characteristics wrth excellent suppressron of unwanted excitation hght (I) Double or triple band excitation filters exist from commercral sources. Barrier filters are used to block unwanted excitation hght Drchrolc mirrors reflect hght of shorter wavelengths and transmit light of longer wavelengths Drchroic murors are positioned wrthm the microscope at a 45” angle to the optical axis to reflect excitation rays mto the ObJeCtlVe in epr-rllummatlon (1). Drchrorc mirrors now exist for the simultaneous fluorescence of two or three fluorochromes Double or triple band pass filter sets combme into one cube an excitation filter, a barrier filter, and a drchroic mirror. This permits the simultaneous detection of multt-fluorochromes without the need of computer image overlay to correct for regtstration shift
2.2. Nick
Translation
1 Nucleotrde mix for brotm incorporation 0 5 mM dATP, 0 5 mM dGTP, 0 5 mM dCTP, 0.5 mM brotm 1 l-dUTP, 0 5M Tris-HCl, pH 8 0, 50 mM MgC12, 0 5 mg/ mL BSA 2 Nucleotide mix for drgoxigenm incorporation. 0.5 mMdATP, 0.5 mMdGTP, 0 5 rniW dCTP, 0 375 mM dTTP, 0.125 mM drgoxrgenin- 11-dUTP, 0 5M Trrs-HCI, pH 8 0,50 mM MgC12, 0 5 mg/mL BSA 3 DNase I. 4. DNA polymerase 5. 0.2M EDTA. 6. Spin column
2.3. In Situ 1. 2 3 4 5 6
Hybridization
and
Immunocytochemistry
A solution of 1 pg/pL of human Cot-l DNA (sonmated to 200-600 bp). A solutton of 1 pg/l.tL of total human placental DNA (sonmated to 200-600 bp) 3M Sodium acetate, pH 5 2. Hybridization mix 50% formamide, 2X SSC, pH 7 0, 10% dextran sulfate Chromosome denaturatlon solution 70% formamtde, 2X SSC, pH 7 0 Posthybridization washmg solutions 50% formamide, 2X SSC, pH 7 0 2X SSC, pH 7 0
FISH
7. 8. 9. 10. 11 12
Using
Chromosome-Specific
DNA
Libraries
17
0.5X SSC, pH 7.0 4X SSC, 0 05% Tween-20. 4X SSC,0 05% Tween-20, pH 7.0. PN buffer: 0 1M NaHzP04, O.lM NazHP04, 0.1% Nonidet P-40, pH 8 0 Nonfat dry mtlk (without vitamin H/biotm). Avrdin-DN FITC (1-5 pg/mL) m PN buffer, 5% nonfat dry milk (without vitamin Wbiotin). Biotmylated goat anti-avidin D (l-5 pg/mL) in PN buffer, 5% nonfat dry milk (without vitamin H/hiotm). Antifade medium: 0 23 g DABCO in 800 ~.LLwater, 200 p.L IMTrts-HCI, pH 8 0, 9000 pL glycerol, vortex and store m dark at -20°C. Add propidium iodide (0.5 pg/mL) and DAPI (0.5 j.tg/mL) to antifade working solution and store at -2O’C Phosphate buffered saline (PBS)
3. Methods 3.1. Preparation of Metaphase Chromosomes Amnlocyte, chorionlc ~1111,peripheral blood lymphocyte (PBL) WBC, or frbroblast cultures are established and slides prepared according to standard cytogenetlc methods (2,3). 1. Dehydrate slides through a series of me-cold (-20°C) ethanol washes for 3 mm each 50, 70, and 95% alcohol. 2. Air-dry slides at room temperature. 3 Store slides at 4’C for short-term use, or -70°C for long-term storage Slides need not age prior to FISH. 3.2. Labeling of DNA Probes Various methods exist that are commonly used to prepare hapten labeled DNA (see Note l), Nick translation is one method which synthesizes uniformly labeled double stranded DNA (4) (see Note 2). 3.2.1. Nick Translation Using Biotin Thrs protocol mcorporates brotin and permits long-term probe storage at -20°C without DNA degradation (5). Various commercial sources exist to obtarn brotin labelmg krts or mdivrdual reagents that are required for neck translation. Slight variations tn protocols exist. 1. To 1000 ng DNA (RNA free) add 5 pL nucleotide mix 2 Bring reaction volume to 45 @L with water 3 Add 5 pL enzyme mix (containing appropriate amount of DNase I for optimal fragment stze [see Note 31, and 20 U of DNA polymerase I) 4. Incubate for 1 h at 37°C. 5 Add 5 PL 0.2M EDTA to stop the reaction 6 Separate labeled DNA from unincorporated nucleottdes by gel filtration usmg a spm column (see Note 4) 7 Store labeled DNA at -20°C in the dark
Kearns
18
and Pearson
3.2.2. Nick Translatcon Using Digoxigenrn Digoxigenm, isolated from plants Digitalis purpurea and Digitalis lanata, IS another hapten used in FISH (see Note 5). Combining biotm and digoxigenm, simultaneous two-probe two-color FISH may be performed. Digoxigenm incorporation by nick translation is performed as described above except substitute 5 lt.L of the digoxigenm-contammg nucleotide mix (see Section 2.2.2.) for the biotm-containing nucleotide mix. 3.2.3. Prelabeled Chromosome-Specific DNA Probes Commercial sources exist to obtain chromosome-specific DNA already labeled with various fluorochromes.
libraries
3.2.4. Multiprobe Multicolor FISH Simultaneous three-probe three-color FISH can be performed using biotm, digoxigenin, and a prelabeled chromosome-specific DNA library. Three-color FISH signal visualization requires a triple band pass filter configuration. 3.3. Preparation of Probe and Unlabeled Competitor DNA for Hybridization See Note 6 for a general discussion of probe preparation and the use of competitor DNA. If using chromosome-specific DNA libraries already prelabeled with various fluorochromes, proceed directly to Section 3.4., step 1. 1 The amount of chromosome-specific follows: When vector.insert 100-500 ng;
plasmid library DNA used is estimated as
ratio 1s 1 1, the range of hbrary
DNA
used will
be
For chromosomes 1, 2, and 3 (A-group), use 500 ng,
2. 3. 4 5 6 7. 8 9 10.
Il.
For chromosomes 4 and 5 (B-group), use 300-450 ng, For chromosomes 6- 12, and X (C-group), use 250-350 ng, For chromosomes 13,14,15,21,22, and Y (D- and G-group), use 150-200 ng, For chromosomes 16-20 (E- and F-group), use 100-200 ng See Note 7 Combme labeled probe (100-500 ng) wrth the approprrate amount of competrtor DNA (l-5 pg of human Cot-l DNA, or 1-26 p-g of total human placental DNA) Add l/IO total vol3M sodium acetate, pH 5.2. Add 2.5 total vol alcohol (Ice cold) Vortex for 30 s. Place Eppendorf tube m ice bucket or -70°C freezer for 30 mm Spm in cold room for 30 min Drscard supernatant, wash pellets wrth 500 pL 70% ethanol (me cold) Spur for 5 mm m cold room. Discard supernatant and dry pellet using a SpeedVac (or lyophilize or au-dry pellet)
Resuspend pellet in 10 uL hybridization
mix.
12. Allow pellet to dissolve for approx 30 mm at 37°C.
FISH Using Chromosome-Specific 3.4. Metaphase
DNA Libraries
Chromosome
19
Denaturation
1. Prewarm slides to 42°C for 10 min. 2. Add 100 p,L of chromosome denaturatron solution to each slide and cover with a 24 x 50 mm coverglass 3 Denature slides by placing in 75°C oven for 2-5 mm 4 Dehydrate slides through a serves of ice cold (-20°C) ethanol washes for 3 min each: 50,70, and 95% alcohol. 5 Air-dry slides at room temperature. 3.5. Hybridization 1 Denature probe/competitor DNA by incubation at 75-80°C for 5 min. 2 Chill on ice bath for 1 mm. 3 Allow DNA to preanneal at 37°C for 30 min to 1 h (time range varies from a few minutes to 2 h maximum) 4 Prewarm denatured chromosome slides to 42°C. 5 Prepare moist chamber 2000-mL beaker with moist paper towels (formamide, SSC) and slide holder; seal chamber with aluminum foil 6. Prewarm hybridization chamber to 37°C. 7 Apply the preannealed DNA solution to denatured chromosome slides. 8. Cover hybridization mix with 18 x 18 mm coverglass, seal wrth rubber cement, and place in moist chamber. 9. Hybridize at 37°C for 16-24 h 3.6. Immunocytochemistry Immunocytochemistry uses fluorescent signal detection to identify haptenlabeled nucleic actd probes. The technique can be direct or indirect (see Note 8). The followmg steps will describe indirect signal detection using one chromosome-specific biotmylated plasmid DNA library as probe (8-10). If multiprobe FISH IS performed, variations are required. 1. Remove slides from hybridrzatron chamber and carefully remove rubber cement using pointed forceps 2. Perform all the following washes using Coplan Jars and apply gentle solution agitation Steps 3-5 are the strmgency
washing steps.
3 Wash three times for 5 min each m 50% formamtde, 2X SSC, pH 7.0, at 37°C (time varies from 2-10 min; temperature varies between 37-43’C). 4 Wash three times for 5 min each in 2X SSC, pH 7 0, at 37°C (trme varies from 210 min; temperature varies between 37-43’C). 5. Optional wash: Wash for 5 mm in 0.5X SSC, pH 7.0, at 37“C (time varies from 2-10 mm, temperature varies between 37-43”(Z). 6. Wash for 5 min m 4X SSC, 0.05% Tween-20, pH 7 0, at 37°C 7 Add 100 pL PN buffer, 5% nonfat dry milk, pH 7 0 to each slide Cover with a 24 x 50 mm coverslip and incubate for 10 min at room temperature m moist chamber 8 Wash twtce for 5 mm each m PN buffer at room temperature.
20
Kearns
and Pearson
9 Add 100 pL of Avidm-DN FITC to each slide. Cover with a 24 x 50 mm coverslip and incubate for 30 min at room temperature m moist chamber. 10 Wash three times for 5 mm each m PN buffer at room temperature. 11. Add 100 l.rL of biotinylated goat antlavidin D to each slide Cover with a 24 x 50 mm coverslip and Incubate for 30 mm at room temperature m moist chamber. 12 Repeat steps 9 and 10 13 Wash twice for 5 mm each in PN buffer at room temperature. 14 Wash for 5 mm m PBS, pH 7.2, at room temperature 15 Mount chromosome preparations in 15 pL antifade medium containmg propldium iodide (0 5 pg/mL) and/or DAPI (0 5 p.g/mL) 16 View slides usmg a properly configured epifluorescent microscope. 17 For photomicroscopy, use ASA 400 color slide film with exposure times rangmg from 15-60 s. See Note 9 for troubleshooting
hints.
4. Notes In our experience, it is not required to isolate DNA inserts from plasmid vector sequences prior to labeling. In fact, the presence of some vector sequences in the hybridization mixture may enhance the Intensity of the fluorescent signal observed In nick translation, DNase I nicks the DNA and polymerase I adds nucleotides to the 3’ termmal end. Polymerase I also has 5’+3’ exonucleolytic actrvrty, whtch removes nucleotides from the 5’ end of the nicked DNA One requirement for successful FISH usmg chromosome-specific libraries is that the labeled probe DNA fragments range in size between 200 and 800 nucleottdes The amount and activity of DNase within the nick translation reaction affects the size of labeled DNA fragments Different batches of commercial DNases are produced with varying activities. Therefore, one must adJust the optimal DNase concentration/batch m the tuck translation reaction. Polyacrylamlde gel electrophoresls IS performed to obtain DNA fragment sizes 4. Spm column separation is not always required since free biotm is water soluble and ethanol precipitation generally removes all unmcorporated biotm from the nick translation reaction mix. 5. The blossoms and leaves of Digltah purpurea and Dlgltalis Lanata are the only natural source of dlgoxigenm Therefore, no binding of antidigoxigenin-fluorochrome antibodies occurs to other biological material Digoxigenm is linked to uridme nucleotides at the number five position of the pyrlmidme ring vta an 11 carbon atom spacer arm (6) 6. Probe preparation and use of competitor DNA* Chromosome-specific plasmid DNA hbraries exist for all human chromosomes. The plasmids contain genomic inserts ranging m size from approx 0 1-6 kb (7). These genomic inserts contam sequences specific for mdivldual chromosomes and interspersed repetitive elements Successful hybridization usmg chromosome-specific plasmid DNA hbraries requires suppression of repetitive DNA without blockmg the smgle copy chromosome-specific sequences To achieve this, labeled probe fragments are denatured along with an excess of unlabeled competitor DNA, Sources for competitor DNA mclude either total human (placental) DNA or human Cot- 1 DNA
FLW
Using
Chromosome-Specific
DNA
Libraries
21
somcated to fragment sizes m the range of 200-600 bp. Immediately following denaturation, preannealing is performed at a lower temperature over a time range from a few min to 2 h During preannealing, repetitive elements of the probe rapidly hybridize to homologous sequences present In the competitor DNA. Our laboratory prefers to use human Cot-l DNA for suppression of repetitive elements. However, instances occur where midlevel repeats are not successfully blocked by Cot-l DNA. In these cases, total human DNA is used for suppression of repetitive DNA Titration studies must be performed when using total human DNA so as to not block the desired probes single copy sequences 7 If two or three chromosome-specific DNA libraries will be hybridized together, DNA mixtures of each library must remam separate from each other until the hybridization mix is added to appropriate slides 8. Direct vs indirect signal detection Direct signal detection uses one layer of fluorochrome and indirect detection uses more than one layer of fluorochrome. Indirect signal detection permits several cycles of amplification. However, while the probe srgnal intensity increases, background fluorescent Intensity also increases 9 Troubleshootmg Problem Solution Probe added’? a. No signal DNA denatured? Check hybridization and wash conditions Au bubbles under covershp? Using appropriate filter sets? Fluorescent microscope properly configured? b Weak signal Target DNA denatured? Probe DNA denatured? Check hybridization and wash conditions Probe DNA concentration correct? pH of strmgency wash correct? c. High background Using a broad band pass filter? Correct stringency washes used? Shdes cleaned prior to metaphase chromosome preparation? Cytoplasm around chromosomes? Cell debris on metaphase preparations? d Poor chromosome morphology Temperature during denaturation too high? Formamide concentration during denaturation too high? Glacial acetic acid percentage too high durmg dropping of slides? (60% glacial acetic acid is ideal to remove cytoplasm and spread chromosomes Higher concentrations may give chromosomes a “fried” appearance.)
22
Kearns
and Pearson
References 1 Ploem, J S. (1993) Fluorescence mrcroscopy, m Fluorescent and Luminescent Probesfor Biologtcal Activity (Mason,W T., ed ), Academic,London,pp l-l 1, 2. Gosden,C M , Davtdson,C., andRobertson,M. (1993)Lymphocyteculture, m Human Cytogenettcs: A Practtcal Approach (Rooney,D E. andCzepulkowski,B. H , eds.),IRL, Oxford UK, pp. 3l-54 3. Rooney,D E. and Czepulkowski,B H (1993)Prenataldtagnosrsand trssueculture, m Human Cytogenetlcs A Practical Approach (Rooney,D E and Czepulkowski,B H , eds), IRL, Oxford UK, pp. 55-90 4. Kelly, R. B., Cozzarelh,N. R , Deutscher,I R , Lehman,I R , andKornberg,A (1970) Enzymatrc synthesisof deoxyrrbonucleic acid. XXX11 Replication of duplex deoxyribonucleicactdby polymeraseat a singlestrandbreak J Biol Chem 245, 3945 5. Langer,P.R , Waldrop,A. A , andWard, D A. (1981)Enzymatrcsynthesisof bronylated polynucleotrdes* novel nucleicacid affuuty probesPYOC Nat1 Acad Scl USA 78,66636637. 6 Kessler,C (1991)Thedrgoxrgenmsystemanti-drgoxrgenmtechnology-a survey on the concept and reahzationof a novel btoanalytrcalmdtcator system Mel Cell Probes 5, 161-205. 7 Collms, C , Kuo, W L., Seagraves,R , Fuscoe,J , Pmkel, D., and Gray, J. W. (1991) Constructionandcharacterrsatron of plasmidhbrarresenrichedm sequences from single humanchromosomesGenomrcs 11,997-1006 8 Pinkel, D., Straume,T , andGray, J (1986)Cytogeneticanalystsusmgquantitatrve,hrgh sensitrvrty,fluorescencezn sttu hybridtzatron PYOC Nat1 Acad Set USA 83,2934-2938 9. Rosenberg,C., Blakemore,K. J., Kearns,W G., Grraldez,R , Escallion,C , Pearson,P. L , and Stetten,C (1992) Detectronof chromosomal rearrangements by fluorescencern situ hybridization Am. J Hum Genet 50,700-705. 10 Batrsta,D. A S , Tuck-Muller, C M , Martinez, J E , Kearns,W G , Pearson,P L., and Stetten,G. (1993)A complexchromosomalrearrangement detectedprenatallyand studied by fluorescencem situ hybridization Hum Genet. 92, 117-l 21,
CHAPTER 3
Reverse
Chromosome
Painting
S@ren Pedersen, Johnny Hind&r, Carsten A. Brandt, Lars Bolund, and Steen Kelvraa 1. Introduction Chromosome paintmg refers to the complete decoration of specific metaphase chromosomes with complex probe mixtures. The painting signal is obtained by fluorescence in situ hybridization (FISH) of such mixtures established from a number of different sources (1-4). This technique is a valuable supplemental method m the detailed analysis of specific chromosome aberrations, complex chromosome rearrangements, and chromosomes of poor quality, which have been unresolvable with the traditional chromosome banding techniques. In traditional chromosome painting, complex probe mixtures representing specific chromosomes are hybridized to metaphase spreads contaming the chromosome aberration in question. If the hybridized probe mixtures are fluorescence labeled, the composition of the aberrant chromosome is revealed by the distribution of the fluorescence signals obtained with the different probes. The combmation of different labeled probes and multicolor techniques simplifies the evaluation. This chapter describes a painting strategy called reverse chromosome painting. Here, a few aberrant chromosomes are first isolated by fluorescence-activated cell sorting (FACS) and used for the generation of a complex probe mixture by poIymerase chain reaction (PCR). The labeled PCR product is then used m chromosome painting by FISH to slides with normal metaphase chromosomes. In this way, the composition of the isolated aberrant chromosomes is directly reflected m the distribution of the fluorescence signals on the normal metaphase chromosomes. The advantage of this strategy is that no prior knowledge of the orlgm or the intrinsic components of the aberrant chromosomes is needed. Another advantage is that an optimized preparation of chromosome slides (e.g., prometaphase chromosomes) can be used m the analysts of the complex probe. One restriction of the technique is that it is only applicable when it is possible to isolate the aberrant chromosomes with flow sorting. However, m situations where this is not feasible, direct painting can be performed with complex probes established from flow-sorted normal chromosomes. From Edlted
Methods m Molecular Bology, by K Ii A Choo Copyright
Vol 33 In .!Mu tfybndtzafm Protocols 01994 Humana Press Inc , Totowa, NJ
23
24
Pedersen
et al.
In Sections 1.1.-l .3 ., we have outlmed the general strategy of the reverse chromosome painting technique. Sections 2.-4. then present the detailed protocol for chromosome preparation for sorting, and the method for degenerateolrgonucleotide-primed PCR of the sorted chromosomes to produce specific chromosome paints. Once these materials are prepared, standard FISH can be performed. The FISH techniques will not be described here since these protocols can be found in other chapters in this volume. 1.1. Chromosome Sorting A high frequency of cells are accumulated in the metaphase after colcemide treatment of the cell culture. The cells are resuspended m a hypotomc, chromosome-stabilizing buffer contaming Mg2+, where single chromosomes and nuclei are released mto suspension after removal of the cell membranes with detergent and mechanical treatment. Fmally, the chromosomes are stained in suspension with two different DNA-bmdmg fluorochromes. Each chromosome is individually analyzed in the cell sorter, with respect to the intensity of the blue fluorescence from the UV excitable Hoechst 33258, which shows AT basepatrbmding preference, and the yellow fluorescence from the violet excitable Chromomycin A3, whtch shows GC basepair-binding preference. The fluorescence signals therefore reflects both the size and the general base composttion of the individual chromosomes. When these signals are presented m graphtcal form as a bivariate dot plot, as shown m Fig. 1 (each dot represents the fluorescence intensity of the Hoechst 33258 plotted on the y-axis, and the mtensrty of the Chromomycin A3 plotted on the x-axis for a given chromosome), all chromosomes except the group 9, 10, 11, and 12 are resolved as dtstmct peaks. Because of the great normal variation in the centromeric heteromorphtsms found m many of our chromosomes, the exact distribution of the chromosomes in such flow karyograms differ among individuals. Such differences can also be seen among homologous chromosomes, which ~111sometimes be distributed as two distinct peaks m the flow karyogram. Sorting regions that define fluorescence intervals both of the Hoechst 33258and Chromomycin A3 fluorescence can be placed anywhere m the flow Frg. 1 (opposztepnge) Brvartate dot plots representmg flow cytometrtc analysis of lo4 suspenston chromosomes stained wtth Hoechst 33258 and Chromomycm A3 In dot plot A, a flow karyotype from a normal 46,XY cell lme is shown In dot plot B, the fluorescence distribution of chromosomes obtamed from a cell hne contammg a reciprocal 13,17 translocatron IS shown The normal chromosome 1 m dot plot A, located m the Indicated regron Rl, and the derivattve chromosome 17 m dot plot B, located m the peak contamed m the mdrcated regron R2, were sorted and used for the generatton of complex probe mrxtures by DOP-PCR These products were used rn the chromosome pamtmg expertments shown later m Fig 3.
25
Reverse Chromosome Painting
1
I..,
.I....
1
0
200
A
Chromomyan
r..
0
B
.I..
400
1,
200 Chromomycln
.
.
.
.
.
.
600 A3 fluorescence
I,.
400
,I,.
600 A3 fluorescence
.
.
.
.
.
.
.
800
..I
1000
intensity
I,,
800 lntenslty
..
I
1000
Pedersen et al.
26
karyogram. When such a window is set to contam a chromosome peak of interest m the flow karyogram, chromosomes from this peak are recognized and selected for sorting (Ftg. 1). 1.2. Amplification
of the Sorted
Chromosomes
A small number (500-2000) of flow-sorted chromosomes are used as template to generate a complex probe mixture by PCR using a degenerate primer developed by Telemus et al. (5). This primer, with the sequence S-CCG ACT CGA GNN NNN NAT GTG G-3’, is used in a reaction called degenerate-ohgonucleotide-primed PCR (DOP-PCR). The primer contains three short sequence motifs. In the 3’-end of the prtmer, 6 nucleottdes represent a unique sequence that ensures perfect match of the 3’-end at sites with appropriate average spacmg (46 = 4096). In the middle of the primer, a complete degenerate sequence of 6 nucleotides follows, which improve stabilization of the annealing complex during the first five cycles of the PCR. In the S-end of the primer, 10 nucleotides represent the recognition sequence of the restriction enzyme XhoI, which can be used m cloning protocols and which also increases the annealing stability during the later PCR cycles. Figure 2A shows an agarose gel separation of the probe mixture obtained by DOP-PCR of 1000 copies of chromosome 13 as described in the protocol given in Section 3.3. 1.3. Chromosome
Painting
Biotm-labeled DOP-PCR product from the relevant chromosome is finally hybridized to metaphase chromosomes in situ, and the hybridized probe is visualized after fluorescein-conjugated avidm staining. Crosshybndization of repeat DNA sequences common to many chromosomes is suppressed by preannealing the hybridization probe with unlabeled, fragmented total human DNA or COT1 DNA. Typical examples of such painting experiments are shown m Fig. 3. 2. Materials 2.1. FACS
For chromosome sorting, we use a FACStarPIUs(BDIS, San Jose, CA) with two argon-ion lasers. The first laser excites the Hoechst 33258 with 200 mW in the UV range (351.1 + 363.8 nm) and the fluorescence collection is through a 424/44-nm bandpass filter. The second laser excites the Chromomycm A3 with the 457.9-nm line, and the fluorescence collection is through a 490-nm longpass filter. We routinely run the sorter with a 70-pm nozzle, and as sheath liquid we use 0.9% NaCl. LYSYS II standard software is used for data analysis and for running the cell sorter. 2.2. Isolation
and
Staining
of Suspension
ug/mL Colcemid stock solution 2. 100 mM MgS04 Aliquot and storeat -2O’C. 1
10
Chromosomes
27
Reverse Chromosome Painting MlM2
1
2
3
4
M2
1
2
3
4
Fig. 2. Agarose testgel analysis of DOP-PCR products generated in two successive PCR reactions. The primary DOP-PCR product (not shown) was generated from lo3 flow sorted normal chromosome 13 as described in Section 3.3., and 1 pL (lane 3) or 2 pL (lane 4) of that product was biotin labeled in a second DOP-PCR as described in Section 3.4. DOP-PCR without biotin-dUTP of 1 pL (lane 1) or 2 pL (lane 2) of the primary product are also shown. In each lane, 5 pL DOP-PCR product was loaded. (A) Ethidium bromide stained agarose testgel. (B) Southern blot of the testgel shown in A after avidin-alkaline phosphatase staining of incorporated biotin-dUTP. Ml: l-Hi&III marker; M2: Pat 153~HinjI marker. 3. HEPES buffer: 6.25 mM HEPES, 50 mII4 KCI. Adjust to pH 8.0 with KOH and
4. 5. 6. 7. 8. 9. 10.
store at 4‘C for not more than 1 wk. 120 mM Dithiothreitol (DTT). Aliquot and store at -2O’C. 100 pg/mL Hoechst 33258 DNA stain. Store at 4’C. 2 mg/mL Chromomycin A3 DNA stain in absolute ethanol. Store at -2O’C. 100 mM Sodium citrate. 250 mM Sodium sulfite. 2% Sodium azide in water. 2.5% T&on X-100 stock solution. Filter through a disposable 0.22~pm sterile filter.
2.3. DOP-PCR 1. 10X Tuq buffer (without Mg2+): 500 mM KCl, 100 mM Tris-HCl, 0.1% gelatin, pH 8.3. Aliquot and store at -20°C. 2. 100 mM MgC12 stock solution. Aliquot and store at -2O’C. 3. dVTP: dATP, dCTP, dGTP, 10 mM each. Aliquot and store at -2O’C. 4. 10 mM dlTP. Aliquot and store at -2O’C. 5. 1 mM Biotin-1 l-dUTP (Sigma, St. Louis, MO). 6. Primer 6 Mw: S-CCG ACT CGA GNN NNN NAT GTG G-3’, 95 pmoVp.L.
Fig. 3 (see color plate number 5 after p. 172). Results of two typical chromosome painting experiments. (A) Reverse chromosome painting with a complex probe mixture generated from lo3 copies of the translocation chromosome sorted from the region shown in Fig. 1B. The painting signals on the normal metaphase chromosome spread clearly demonstrate that the isolated translocation chromosome was derived from chromosomes 17 and 13. All of chromosome 17 except the q terminal part, and approximately half the distal part of the acrocentric chromosome 13 are painted. (B) Direct painting with a probe mixture generated from IO3 normal chromosome 1, flow sorted from the region indicated in Fig. 1A. The slide contains chromosomes from a continuous T-cell line, established from a patient with SCzary syndrome (S), with a very complex karyotype.
Reverse 7. 8 9 10 11 12
Chromosome
29
5 U&L Tag DNA polymerase (Boehringer Mannhelm, Mannhelm, Paraffin oil. TE buffer 10 mM Tris-HCl, 1 mM EDTA, pH 7 5. 3M Sodium acetate, pH 5 2 Hybaid thermal reactor. Vacuum centrifuge
2.4. Agarose 1 2 3. 4 5 6
Painting
Testgels
and
Staining
of Southern
Germany).
Blots
Agarose (Litex) TBE buffer. 0.045M Tris (Sigma 7-9), 0.045M Borate, 0 OOlM EDTA, pH 8.0 Southern blotting transfer buffer* 2 5 mM NaH2P04, 2 5 mM Na,HPO, 2H,O Blocking buffer 0 5M NaCl, 0 1M Tris-HCl, pH 9.0 Developing buffer O.lM NaCl, 0 1M Tris-HCl, 10 mM MgCl,, pH 9 0 16 mg/mL BCIP (5-Bromo-4-Chloro-3-Indolyl-Phosphate) m 100% dlmethyl-
formamide 7. 37 5 mg/mL NBT (Nltro-Blue-Tetrazohum) 8 AvIdin-alkaline phosphatase.
in 70% dimethylformamlde
9. Hybond-N membrane (Amersham Int., Amersham, UK) 3. Methods 3.1. Culturing of Cells Lymphoblastold cell lines are established by Epstem-Barr vn-us (EBV) transformation. These are cultured in RPM1 1640 medium supplemented with 10% fetal calf serum, 2 mM L-glutamme, and antibiotics (see Note I) Block cells m metaphase by adding 100 PL colcemld stock solution to each 10 mL cell culture. After 17-20 h of colcemid treatment, suspension chromosomes are isolated by the method of Van-den-Engh (6,7) as described below. 3.2. Isolation and Staining of Suspension Chromosomes 1. Prepare 10 mL chromosome isolation buffer by mixing, 1 0 mL 100 mM MgS04, 8 0 mL HEPES buffer, 0 25 mL DTT stock solution, and 0 75 mL HZ0 Filter through a disposable 0.22~p.rn sterile filter. 2. Transfer colcemide blocked cell culture suspension to a 15-mL centrifuge tube, and centrifuge for 10 min at 800 rpm at room temperature
3 Decant supernatant completely, remove last drops of medium with a KleenexTM tissue, and loosen cell pellet by tapping. 4. Add 5 mL of chromosome Isolation buffer, and incubate the sample for 10 min at room temperature.
5. To each 5 mL sample, add 500 pL 2.5% Triton X-100 stock solution, and incubate for 10 min on ice. 6 Vortex sample for 20 s on a whirl mixer.
7. Add 125 PL Chromomycin
A3 and mix, then quickly add 125 p.L Hoechst 33258,
and mix. 8 Add 50 pL sodium azlde and incubate the sample overnight at 4°C m the dark
9. Add 100 JJL sodium citrate and 100 PL sodium sulfite to a new sample tube and transfer 800 FL chromosome
suspension with a 1-mL syringe to the tube, mix,
30
Pedersen
et al.
and disintegrate chromosome clumps by syringmg three times through a 22-gage needle. 10 After 15 mm of incubation, analyze the sample in the FACS, and after identification of the peak representing the relevant chromosome, sort 500-2000 directly into the PCR tube. 11, The PCR tubes are centrifuged m an Eppendorf centrifuge for approx 10 s, and the sorted chromosomes are stored at -20°C until use m the DOP-PCR. 3.3. DOP-PCR 1 Prepare DOP-PCR
rmxture:
dVTP dlTP 10X Tuq buffer (wlthout Mg2+) 100mA4MgCI, DOP Primer (Primer6MW) Tuq DNA polymerase H2O
pL pL 100 pL 45 pL 20 pL 025 pL 65 25 pL
Total
900
60 20
pL
2. To each PCR tube containing 1000 of the desired chromosomes in approx 10 PL sheath liquid, add 90 PL DOP-PCR truxture, and mix 3. Overlay with 60 PL paraffin oil. 4. Place the tubes in the PCR thermocycler and denature by heating for 10 min at 93°C. 5. Perform five identical cycles with denaturation at 94’C for 1 min, anneahng at 30°C for 1.5 mm, followed by increase m temperature to 72°C over a 2 mm period, then hold the temperature at 72’C for 3 min 6 Next perform 35 cycles with denaturatlon at 94°C for 1 mm, annealing at 55°C for 1 mm, extension at 72’C for 3 min, increasing the extension step by 1 s for each cycle The final extension was for 10 min. 7. Remove the paraffin 011 by placing the PCR mixture on a parafilm strip, which adsorbs the oil. Transfer the PCR mixture to an Eppendorf tube. 8 Add 10 I.LL sodium acetate and mix, then add 220 I.LL ice-cold absolute ethanol, and precipitate the DNA by incubating at -70°C for 1 h 9. Spin down the precipitate in a cooled Eppendorf centrifuge for 15 mm. 10. Remove supernatant Add 100 PL 70% ice-cold ethanol, and centrifuge agam 11 Decant the ethanol and dry the sample In a vacuum centrifuge for approx 10 mm 12. Dissolve the DNA pellet m 20 FL TE buffer and store at -20°C until use (see Note 2) The complex (see Note 3).
3.4. Probe Labeling with probe is labeled with biotin-dUTP
Biotin m a second round of PCR
Reverse
Chromosome
31
Painting
1, Prepare biotm DOP-PCR mixture: dVTP dlTP Blotm-1 l-dUTP 10X Taq buffer (wlthout Mg2+) 100 mM MgClz DOP primer (Primer 6 MW) Tuq polymerase
Hz0
FL pL 6.6 /.tL 100 pL 60 pL 20 j.kL 025 j.lL 66 15 J.lL
Total
99
60
1.4
0
fiL
2. Add 1 PL of the complex probe to 99 pL of the biotm DOP-PCR mixture 3 Perform 35 PCR cycles with denaturatton at 94’C for 1 mm, annealing at 55°C for 1 mm, extension at 72°C for 3 min. Final extension is for 10 min at 72°C. 4. Precipitate the PCR product as described in Section 3.3 , steps 7-l 1 5. Dissolve the biotm-labeled probe in 10 ltL TE buffer and store at -20°C until further use (see Note 4).
3.5. Chromosome
Painting
Chromosome parnttng IS performed essentially as described tn ref. 4, with l-2 PL btotm-labeled DOP-PCR product (see Section 3.4.), m a final hybridtzation vol of 12 FL. Hybrtdizatron 1s performed under a 18 x 18 mm coverslip.
4. Notes 1 The cell lines are propagated in 50-mL culture flasks placed m upright position Culture medium is changed by gently tilting the flasks, and after sedimentation of the large cell aggregates, which these cell lines form during prohferation, old culture medium is removed and fresh medium is added. For three successive days prior to chromosome isolation, the medium is changed and the cell suspension is split and transferred to two new flasks after dtsaggregation of cell clumps by shaking the culture flasks. This procedure removes most of the dead cells from the cell culture and selectively maintains a pool of rapidly prohferating cells 2. It is essential, in the painting reaction, that the PCR product is not enriched for repetitive DNA, since this will reduce the chromosome specificity of the complex probe. The composition of the PCR product can be evaluated using agarose testgel electrophoresis (Fig. 2A) A 2% agarose testgel m TBE buffer is used and 5-10 l.tL of the DOP-PCR product is run together with appropriate srze markers. After stammg of the gel with ethidmm bromide, the DOP-PCR products are easily recognizable on a UV transillummator. As shown m Fig 2A, the PCR products contain a smear of sequences with lengths of 150-1000 bp, and, since no discreet bands are found, the product seems not to be enriched for specific DNA repeat sequences. 3 Biotm-dUTP can be substrtuted with alternatively labeled nucleotides in the DOP-PCR labeling protocol. We have successfully used digoxigenm-1 l-dUTP, fluorescein-12-dUTP
(Boehrmger Mannheim), rhodamine-4-dUTP,
and AMCA-
Pedersen
et al.
4-dUTP (Amersham) m the same molar concentration as biotm-dUTP. The pamtmg srgnals are directly visible m the microscope when the DOP-PCR products are generated with the fluorochrome-labeled nucleotides, and m agarose testgels the DOP-PCR products can be seen wrthout ethrdium bromrde staming. In most situations, we prefer the use of biotin-dUTP because of the efficient enhancement of the pamtmg signal with the FITC-avrdm/antravidm antibody multilayermg technique 4 Biotm incorporatron of the DOP-PCR product can be verrfred by Southern blots according to the followmg procedure. a. Run the biotin-labeled DOP-PCR product on an agarose testgel as described in Note 2, and blot overnight on to a Hybond N membrane b. After blotting carefully wash the filter in fresh transfer buffer and air-dry c. Place the filter m a plastic cover Crosslink the DNA to the filter by UV rllummation for 5 min on the transilluminator normally used for visualizing ethidium bromide stained gels d Insert the filter in a 50-mL plastic tube, which IS constantly rotated throughout each of the subsequent steps e. Add blockmg buffer wrth 3% BSA and incubate at 37°C for 30 mm f Incubate the blocked filter at room temperature for 15-20 mm m blocking buffer with 1% BSA and 1 kg/mL avrdin-alkaline phosphatase. g. Wash the filter at 20°C for 5 mm m blocking buffer with 1% BSA, then incubate for 5 min in blockmg buffer (without BSA) and finally incubate for 5 mm in developing buffer h Incubate the filter in developing buffer with 10 kL/mL NBT and 10 pL/mL BCIP i. When the desired staining reaction has been obtained, stop the reaction by washing the filter in water. The stained filter can be stored in the dark A typical example is shown in Ag 2B.
Acknowledgments We thank H. Str@mkjar for expert technrcal assistance. This work was supported by grants from the Danish Centre for Human Genome Research and the Danish Cancer Society.
References 1 Carter, N P , Ferguson-Smrth, M A , Perryman, M T , Telenius, H , Pelmear, A H , Leversha, M A , Glancy, M T , Wood, S L , Cook, K , Dyson, H M , Ferguson-Smith, M E., and Wrllat, L R. (1992) Reverse chromosome pamtmg’ a method for the raprd analysis of aberrant chromosomes m chmcal cytogenetrcs .I Med Genet 29, 299-307 2 Lengauer, C , Eckelt, A , Welth, A , Endhch, N , Ponehes, N , Lrchter, P , Greullch, K 0 , and Cremer, T (1991) Pamtmg of defined chromosomal regrons by m situ suppression hybridization of librarres from laser-mrcrodissected chromosomes Cytogenet Cell Genet 56,27-30 3 Lengauer, C., Riethman, H , and Cremer, T (1990) Pamtmg of human chromosomes with probes generated from hybrid cell lures by PCR with Alu and Ll primers Hum Genet 86, l-6
Reverse Chromosome Painttng
33
4. Pmkel, D , Landegent, J , Collins, C., Fuscoe, J , Segraves, R , Lucas, J , and Gray, J (1988) Fluorescence in situ hybrrdizatton with human chromosome-specific libraries* detection of trtsomy 21 and translocations of chromosome 4 hoc. Nut1 Acad SCL USA 85,9138-9142. 5 Telenius, H , Carter, N P., Bebb, C E., NordenskJold, M , Ponder, B , and Tunnacliffe, A (1992) Degenerate ohgonucleotrde-prtmed PCR. general amplification of target DNA by a single degenerate primer Genomics 13,718-725 6. van-den-Engh, G., Trask, B , Lansdorp, P , and Gray, J (1988) Improved resolution of flow cytometric measurements of Hoechst- and chromomycm-A3-stained human chromosomes after addition of citrate and sulfite Cytometry 9,266-270 7 van-den-Engh, G. J , Trask, B J., Gray, J W , Langlois, R G , and Yu, L C (1985) Preparatron and bivarlate analysis of suspensions of human chromosomes Cytometry 6, 92-l 00 8 Kaltoft, K., Btsballe, S , Rasmussen, H. F , Thestrup-Pedersen, K , Thomsen, K , and Sterry, W (1987) A continuous T-cell lure from a patient with Sezary syndrome Arch. Dermatol Res 279,293-298
CHAPTER4 FISH Detection on DAPI-Banded Chromosomes Henry
H. Q. Heng
and LapChee
Dui
1. Introduction Fluorescence in situ hybridization (FISH) techniques are routinely used m physical mapping studies to determine the regional localization of gene and DNA sequences on human metaphase chromosomes (1). It is often dtfficult, however, to precisely position the hybridization signals with respect to the conventional chromosome bands. Various approaches have been introduced, including G banding before or after FISH detection (2,3), cohybridization with Alu or L 1 probes to generate R or G bands (4), use of a combination of various fluorescent dyes, such as qumacrine, Hoechst 33258, or DAPI, with FISH detecting reagents (5,6), and triple staining with chromomycin, distamycin A, and DAPI (7,8). Unfortunately, these procedures are not widely used because they are time-consummg and require extensive imaging equipment or careful quality control to be reproducible. In our FISH experiments, we occasionally obtained high quality DAPI bands, without the use of any pretreatments, such as distamycin A and chromomycin. This phenomenon encouraged us to search for conditions that give consistent DAPI banding patterns. Our study resulted in the development of a quick, simple, and inexpensive procedure for the generation of high-quality DAPI multibanded metaphase preparations that retam strong in situ hybridization signals (9). The critical step in obtainmg reproducible DAPI banding was apparently related to the degree of denaturation of the chromosome. With increasing denaturation time, three consecutive types of banding patterns could be observed on the same set of chromosomes: DAPI multibanding (equivalent to Q banding), partial C banding (including DA/DAPI banding pattern), and C banding. Although the progression through the above sequence could be interrupted at any stage, the change of chromosome morphology was irreversible and the pattern could not be restored by restainmg with DAPI. The conditions also varied with cell lines and chromosome preparations. In this chapter, we describe detailed protocols for the generation of FISH signals and high resolution DAPI banding on BrdU-mcorporated chromosomes. Using this protocol, we have mapped many yeastartificial chromosome (YAC), cosmid, and phage probes to specific regions on chromosomes (9-121, some examples of which are shown in Fig 1. From Methods tn Molecular Bo/ogy, Vol 33 In SW Hybridizafron Profoco/s Edlted by K H A Choo Copynght CD 1994 Humana Press Inc , Totowa, NJ
35
Heng and Tsui
36
Fig 1. Mapping of cosmid and YAC probes on DAPI banded chromosomes. A shows the FITC signals of probe CF14, whereas B shows the DAPI banding pattern of the same mitotic cell. C-F show the mapping results of YAC probes HSCE803 and 464, respectively. C and E are DAPI banded chromosomes, whereas D and F are the corresponding hybridization signals. Arrows point to the probe and band location.
2. Materials 2.1. Chromosome
Preparation
1. Lymphocytes: Isolated from healthy donors or human cord blood. 2. Lymphocyte culture medium: RPM1 1640 (Gibco, Grand Island, NY) supplemented with 10% (v/v) fetal calf serum (Gibco), 2% phytohemagglutinin (PHA)
FISH on DAPI-Banded
3. 4. 5. 6 7. 8. 9.
Chromosomes
37
(Gibco), and 5 U/mL heparin (Hepalean) (Organon Canada Ltd., Toronto, Ontario, Canada). This medium may be stored at 4’C for a few weeks 5-Bromodeoxyundine (BrdU) (Sigma, St. Louis, MO). Thymidine (Sigma). Potassium chloride (KCl) (Fisher Scientific, Pittsburgh, PA). Methanol (J. T. Baker, Phillipsburg, NJ). Acetic acid (Fisher Scientific). Microscope slides (Johns Scientific, Quebec, Canada). Glemsa staining solution (Fisher Diagnostics, Damstadt, Germany) 2.2. Probe
Preparation
1 Qiagen plasmid purification kit (Qiagen Inc , Chatsworth, CA). Buffers: PI: 50 mM Tris-HCl, 10 mM EDTA, pH 8, 0.1 mg/mL RNase. P2: 0 2M NaOH, 1% SDS P3. 3.OM potassium acetate, pH 5.5. Washing buffer 1M NaCl, 50 mM MOPS, pH 7, 15% ethanol Elution buffer 1 25M NaCl, 50 mM Tris-HCl, pH 8 5, 15% ethanol. 2 Solutions for phage DNA preparation* Absorption solution 10 mM MgC12, 10 mM CaC12. SM solution (1 L)* 5.8 g NaCl, 2 g MgS04 7H,O, 50 mL 1M Tns-HCl, pH 7.5, and 5 mL 2% gelatin 3. Solutions for YAC DNA preparation. YPD medium (1 L): 10 g Bacto yeast extract, 20 g Bacto peptone, and 20 g dextrose. GDIS: 2% Trlton X-100, 1% SDS, 100 mM NaCl, 10 mM Tris-HCl, pH 7 4 1 mM EDTA. 4. Phenol. 5. Chloroform. 6 Isopropanol. 7. Ammonium acetate. 8. TE buffer (Tris-EDTA): 10 mM Tns-HCl, pH 7.4,O 1 mM EDTA 9 Blotin labeling nick translation kit (BRL, Gaithersburg, MD). 10 Nick column (Pharmacia, Uppsala, Sweden). 11 Salmon sperm DNA (100-500 bp fragments obtained by somcatmg)
1 2 3 4. 5. 6. 7.
2.3. Hybridization Hot plate (37-7O’C); water baths at 37,43, 46, and 70°C, 37’C Incubator. 25-mL Plastic slide mailers. Plastic slides chamber (slide holder). RNase A (Boehnnger Mannhelm, Mannheim, Germany) Ethanol. 75,90, and 100%. Denaturation solution. 70% deionized formamide (IBI) m 2X SSC (20X SSC stock solution: 3M NaCl, 300 mM sodium citrate) Hybridization solution I (for use with plasmid, phage, cosmid, or YAC probes) 50% deionized formanude (IBI) and 10% dextran sulfate m 2X SSC
38
Heng
and Tsui
8 Hybridization solution II (for use with repetitive DNA probes): 65% formamide and 10% Dextran sulfate in 2X SSC 9. Human Cot-l DNA (BRL) 10 Yeast DNA (S cereuuiae, W303-1A) sonicated into 100-500 bp fragments 11. Wash solution A (for nonrepetitive DNA probe). 50% formamide m 2X SSC. 12. Wash solution B (for repetitive DNA probes)* 65% formamide m 2X SSC. 13 Wash solution C: O.lM phosphate buffer, pH 8, 0 1% Nomdet P-40 (Boehringer Mannheim) 14 2X SSC (before and after DAPI staining wash).
2.4. Detection 1. 2 3.
4
and
Amplification
Blocking solution 3% BSA (bovine serum albumm, Sigma fraction V) m 4X SSC, 0.1% Tween-20. Detection solution* 1% BSA and 0 1% Tween-20 m 4X SSC. Store at 4°C. Avidm-FITC (fluorescem isothtocyanate, Vector, Burlmgame, CA) 500 kg/ mL stock solution. FITC detection workmg solution. Add 10 PL of avidinFITC stock solution to 990 l.rL detection mixture Store in the dark at 4°C. Good for up to 6 mo. Biotinylated goat antiavidm antibody (Vector). 500 l.tg/mL (stock solutton) Ahquots (50 PL each) can be kept at -20°C Workmg solution. Dilute stock solution wtth detection solution to a fmal concentration of 5 lg/mL.
2.5. Counter-staining
and
Antifade
4’, 6-diamidino-2-phenylmdole (DAPI, Sigma) 0 2 mg/mL stock solution in HzO. Store m the dark at 4°C. Propidmm iodide (PI, Sigma) 0 1 mg/mL stock solution m PBS (phosphate-buffered salme) (Gibco, BRL) Antifade solution. Dissolve 100 mg of P-phenylendiamine in 10 mL PBS Then add 90 mL glycerol Adjust pH to 9 0 by using Litmus paper Store at -20°C. 4 PI counterstammg mixture 50 I.LL propidmm iodide solutton (0 1 mg/mL) plus 1 mL antlfade solution
2.6. Microscopy
and
Photography
1 Epifluorescent
microscope (Leitz Aristoplan, Heerbrugg, Switzerland) with DAPI and FITC filters. For the DAPI filter, excitation filter BP 350-460, reflector RKP 510; emission: LP 520 For the FITC filter, excitation filter: BP 450490; reflector RKP 510, emission: LP 520. 2 Films Kodak Ectachrome P800/1600 E-6p and Kodak TMAX 400.
3. Methods 3.1. Chromosome Preparation 3.1.1. Lymphocyte Culture 2
Prepare the culture medium and distrtbute 20 mL into each flask (Falcon 3082) Isolate lymphocyte from 5-10 mL fresh human peripheral or cord blood by lowspeed centnfugation (500 rpm for 5 mm) Collect the whtte cell suspension
FISH
on DAPI-Banded
Chromosomes
39
3. Add 0.5-O 8 mL of blood cell suspension to each flask and mix well 4 Incubate m a CO2 incubator at 37°C for 68-72 h 1. 2. 3 4
3.1.2. BrdU and Thymidine Treatment Incubate cultured lymphocytes with BrdU (0 18 mg/mL) for an additional 16 h. Spin down the synchronized cells (1500 rpm, 7 min); wash them with serumfree medium; repeat three times to release block Reculture the cells at 37°C for 5.5 h m RPM1 1640 medium plus thymidme (2.5 l.tg/mL). Add colcemid (0.1 l.rgg/mL) to the cultures for 30 min before harvestmg
3.1.3. Harvesting and Slides Preparation by Routine Method (13) 1 Transfer cultured cells into 15-mL centrifuge tube (4-6 mL of cells per tube), collect cells by centrifuging at 1000 rpm for 7 min. 2 Hypotonic treatment. Gently resuspend the cell pellet in about 0.3 mL medium, add 5 mL 0.4% KCl, mix well, and incubate in a 37°C water bath for 10 mm. 3. At the end of the hypotomc treatment, add 0.1 mL of freshly made fixative (3’ I methanol,acetic acid) to each tube for prefixation at room temperature Mix gently by inverting the tubes a few times. Collect the cells by centrifugmg at 1000 rpm for 7 min 4 Discard the supernatant. Resuspend the pellet thoroughly by tapping the bottom of the tube with finger. Add 5 mL fixative (3 1 methanol acetic acid), mix well, and let stand for 20 min at room temperature. 5. After centrifugation, suspend the pellet m a small volume of fixative (about 0.5 mL) Place two drops on a prechilled slide (stand on ice for 15 mm). Dry the slide by waving it in the air. 6. Check the quality of the shdes under microscope after staming with 3% Giemsa solution, pH 6.8, for 10 min at room temperature 7. Adjust the concentration of the chromosome suspension to allow lo-30 metaphase spreads per field at 100x total magnification and continue to make more slides according to the established concentration (see Note 1) 3.1.4. Slides Storage Allow good quality slides to dry at room temperature for 1 d. Seal the slide contamer with parafilm. Slides may be stored at -20°C for a few months (see Note 2).
3.2. In Situ
Hybridization
3.2.1. Probe Preparation 3.2.1.1. PLASMID AND COSMID PROBE PREPARATION Plasmid and cosmid DNA is separated from E. co/i DNA with Qtagen column according to the supplier’s instruction. Briefly: 1. Harvest 5 mL of cultured cells by centrifuging 2. Resuspend cells in 0 3 mL Pl buffer, lyse by adding 0 3 mL P2 solutron and mcubating at room temperature for 5 min; neutralize by adding 0 3 mL P3 buffer
40
Heng
3. 4 5. 6 7
and Tsui
and centrifuge at 4°C for 30 mm (15,000 rpm) to pellet the bactertal chromosomal DNA. Load the suspension into the equilibrated column Wash the loaded column two times with wash solution. Elute the plasmid or cosmid DNA with elution buffer. Precipitate DNA wtth 0 7 vol of isopropanol and collect by centrifuging Wash DNA pellet with 70% ethanol, air-dry, and redissolve m TE buffer.
3.2.1.2.
PHAGE PROBES PREPARATION
The minipreparation
protocol
(14)
may be used to prepare
lambda
phage DNA. 1 Pick a plaque into a 15mL tube containing 0.3 mL adsorption solution and 0 2 mL of bacteria grown in L-broth with 0 4% maltose 2. After incubating the tube for 10 min at 37°C add 10 mL L broth contaming 10 mM MgC12 and 0.1% glucose, then culture overnight 3 Centrifuge at 2000 rpm for 10 mm to remove the bacterial debris from the lysed culture. 4. Collect the phage parttcles by centrifugation at 30,000 rpm for 30 min. 5. Suspend the pellet with 200 pL of SM solution m an Eppendorf tube Add 200 lt.L protemase K (1 mg/mL m SM) to the tube and Incubate at 37°C for 2 h. 6 Extract once with phenol and once with chloroform, and precipitate the DNA with 100 PL 7 5M ammonium acetate and 1 mL 100% ethanol. Wash the DNA with 70% ethanol, air-dry, and dissolve in 100 l.rL TE. 3.2.1.3.
YAC
PROBES PREPARATION
YAC DNA is isolated with total yeast DNA. The method of raped DNA preparation was adopted from published protocol (ll,12,15; see also Chapter 9). 1 Culture yeast cells at 30°C for 2 d m YPD medium 2. Collect cells by low speed centrrfugation, transfer into an Eppendorf tube, and wash with 500 l,tL of HZ0 3 Centrifuge the cells and resuspend in 200 pL of GDIS Together add 0 35 g of glass beads and 200 pL of phenol/chloroform/isoamyl alcohol (25.24: 1) Vortex for 3-4 min 4. Add 200 ltL of double-distilled HZ0 to the tube, mix well, and spin for 4 min m a mtcrofuge Transfer the aqueous layer to an Eppendorf tube. 5 Treat wtth 50 pg of RNase A (Sigma, DNase-free) at 37’C for 10 mm. 6. Phenol/chloroform extract twice and precipitate DNA by ethanol.
3.2.2. Probe Labelsng 1 For plasmid, phage, and cosmid probes* Label purified DNA (1 pg) with the BRL BioNick kit according to the suppher’s instructions (15’C for 60 min) Check the size of the nick translation products with a 1% agarose mmlgel. The optimal size of the labeled fragments IS 150-250 bp. 2. For YAC probes A longer nick translation time is usually necessary Generally, 2 h IS sufficient Check the size of mck translation products on a mimgel
FISH
on DAPI-Banded
Chromosomes
41
3 After labeling, remove the unincorporated nucleotldes using a Nick column (Pharmacia). Then add 60 pg of salmon sperm DNA and copreclpitate with the labeled probes in 40 pL 3M NaOAc and 880 pL ethanol After washing with 70% ethanol, resuspend the probes m 20 pL TE buffer 3.2.3. Probe Treatment
Before Hybridization
3.2.3.1. FOR REPETITIVE PROBES 1. Denature labeled repetitive probes m hybridization solution II. Add 20-50 ng labeled probes m 15 PL of denaturing solution and denature at 75’C for 5 mm, then place on ice immediately. 2. No prehybridlzation is needed for these probes.
3.2.3.2. FOR cDNA PROBES Use the same conditions as for the repetitive probes, but employ hybndlzation solution
I for hybridization.
3.2.3.3. FOR PHAGE, COSMID, AND YAC PROBES These probes generally contain repetitive sequences (e.g., Alu and L 1). It 1s therefore necessary to suppress potential signal from these elements with added genomlc DNA or Cot-l DNA. 1. For phage or cosmid probe, mix together 20-50 ng probes, 13 pL hybridization solution I, and 2 pg of Cot-l DNA or total human DNA. 2. For YAC probes Isolated with total yeast DNA, mix together 200-250 ng labeled probes, 13 l.tL of hybridization solution I, 2 pg of human Cot-l DNA, and 2 pg of total yeast DNA. 3. After 5 mm denaturatlon at 75”C, transfer the tube mto a 37’C water bath for 1530 min for prehybridlzatlon (prehybridization for YAC probe may be slightly longer, e.g., 20-60 min) 3.2.4. Slides
Treatment
Before Hybridization
3.2.4.1. SLIDE BAKING Bake slides (stored at -2OOC) at 55°C for 2 h (see Note 3). 3.2.4.2. RNASE TREATMENT 1. Incubate slides m the 25-mL plastic Jars containing RNase (100 pg/mL m 2X SSC) at 37’C for 1 h. 2 Wash the slides in 2X SSC for 2 min. 3 Dehydrate the slides by Incubating for 3 mm in each of 70,90, and 100% ethanol, and air-dry
3.2.4.3. SLIDE DENATURATION 1. Make fresh denaturation solution of 70% formamide by mixing 14 mL of formamide, 5 mL dlstllled HzO, and 2 mL 20X SSC. Put theJar filled with denaturmg solution mto a water bath and adjust the temperature to let the solution reach 70°C Meanwhile, heat the slides at 50°C to avoid droppmg the temperature of the denaturing solution
42
Heng
and Tsui
2 Immerse one to four prewarmed slides in the denaturation solution for l-l 5 min (see Note 4). 3 Quickly transfer the slides mto a plastic jar with cold 70% ethanol for 2 min, dehydrate the shdes in 95 and 100% ethanol for 3 min each, air-dry, and perform hybridization immediately. 3.2.5. Hybridization
1. Load 15 l.tL of denatured probe with hybridization solution on each slrde, and cover with a 22 x 22 mm coverslip. Gently remove air bubbles and seal the edges with rubber cement to minimize evaporation 2. Hybridize at 37°C in a moist chamber contammg absorbent paper soaked in water. For repetitive probes, hybridize for a few hours to overnight. For cosmid or YAC probes, hybrtdize for 12-36 h (see Note 5) 3.2.6. Posthybridization
Different 3.2.6.1.
wash conditions
Wash
are required depending
on the type of probe used.
FOR COSMID, PHAGE, OR YAC PROBES CONTAINING REPETITIVE ELEMENTS
1 Prewarm wash solution A to 46°C in three plastic jars 2. With forceps, carefully remove the rubber cement from the slides Allow the covershps to float off in 2X SSC solution Wash the slides a few times by agitating 3 Wash slides m wash solution A by gently agitating three times for 3 mm each. 4. Wash three times with prewarmed 2X SSC at 46°C 5 Place shdes in wash solution C and the shdes are ready for detection. If necessary, slides can be kept at 4°C in wash solution C for up to 2 d
3.2.6.2. FOR cDNA PROBES 1 2. 3. 4 5
Prewarm wash solution A to 43°C in three plastic ears. Remove rubber cement and coverslips as described in Section 3 2 6.1., step 2. Wash slides three times m wash solution A for 3 mm each. Wash three times with prewarmed 2X SSC at 43°C for 3 min each. Place slides in wash solution C and the shdes are ready for detection
3.2.6.3. FOR REPETITIVE DNA PROBES, SUCH As C&ATELLITE CENTROMERE DNA PROBES 1. 2. 3. 4 5.
Prewarm wash solution B to 43°C and 2X SSC to 37°C Remove rubber cement and coverslips as described m Section 3 2 6.1 , step 2 Wash slides in wash solution B for 20 mm by agitating. Wash two times wrth prewarmed 2X SSC at 37°C for 4 min each. Place slides m wash solution C and the slides are ready for detection
3.2.7. Detection
and Amplification
3.2.7.1. DETECTION WITH AMPLIFICATION 1. Remove slides from wash jar and blot excess liquid from the edge. 2 Quickly apply 30 l.tL of blocking solution to each slide. Cover with a plastic coverslip and incubate at room temperature for 5 mm
FISH
on DAPI-Banded
Chromosomes
43
3 Gently peel off plastic coverslips, tilt the slide, and allow fluid to dram. 4. Apply 30 pL FITC detection solution to each slide, and cover with a fresh plastic coverslip. Incubate for 20 mm at 37°C m a dark humidified chamber (from this step to observation with microscope, rt is very important to minimize exposure of the samples to light). 5 Remove coverslips and wash the shdes in wash solution C three times for 3 mm each in a new solution. 6 Apply 30 pL of blocking solution to each slide, cover with a plastic cover&p, and incubate at room temperature for 5 min. 7. Apply 30 pL of biotinylated goat antiavidin antrbody working solution to each slide and cover wrth a plasttc coverslip. Incubate at 37°C for 20 min 8 Remove the coverslips and wash the slides three times for 3 mm each in wash solution C. 9. Apply 30 pL of blocking solutron to each slide. Place a plastic coverslip over the solution and incubate at room temperature for 5 mm. 10 Peel off plastic coverslips, tilt the slide, and allow fluid to drain. 11. Apply 30 pL FITC detection solution to each slide and cover with a fresh plastic coverslip. Incubate 20 mm at 37°C. 12. Remove coverslips and wash the slides in wash solution C three times for 3 min each. 13. Stain with DAPI by immersing the slrdes in 0.2 pg/mL DAPI in 2X SSC for 5-10 mm at room temperature. Rinse in 2X SSC three times for 2 min each 14. Mount the slides with 10 pL of antifade solution. Cover with a 22 x 40 mm glass coverslrp. Apply gentle downward pressure to flatten coverslip before examining slide.
Propidium iodide (PI) staining may be applied to visualize the FISH signals and stained chromosomes. Before mounting the slides, mix antifade solution with PI counterstain solutron in the ratio of 3: 1. Mount slides with 10 pL of the mixed PI-antrfade solutron (see Note 6). 3.2.7.2. DETECTION WITHOUT AMPLIFICATION Signal amplificatron may not be necessary when YAC probes or a-satelhte probes are used for FISH detection. 1. Remove shdes from wash Jar and blot excess liquid from the edge. 2. Apply 30 yL of blocking solution to each slide. Cover with a plastic covershp and incubate at room temperature for 5 min 3. Gently peel off plastic coverslips, tilt the slide, and allow fluid to drain 4 Apply 30 yL FITC detectron solution to each slide and cover with a fresh plastic coverslip. Incubate for 20 min at 37°C in a dark humidified chamber (from this step to observation with microscope, it is very important to mimmize exposure of the samples to light) 5 Remove coverslips and wash the slides m wash solution C three times for 3 mm each 6. Stain with DAPI by rmmersmg the slrdes m 0.2 pg/mL DAPI m 2X SSC for 5-10 min at room temperature Rinse in 2X SSC three times for 2 min each
44
Heng
and Tsui
7. Mount the shdes with 10 pL of antrfade solution or 10 PL of mixed PI-antrfade solutton (see Section 3.2.7 1 , step 14) Cover with a 22 x 40 mm glass coverslip Apply gentle downward pressure to flatten coverslip before examining slide. If the signals need further amplification after the slide has been examined, carefully clean all the or1 from the coverslip, carefully remove the coverslip, place the slide in 2X SSC for a quick wash, and then wash slidesthree times for 5 min each in wash solutron C. Subsequentstepsare the sameas steps6-14 m Sectron 3 2.7.1.
3.3. Photography
and Localization on Banded Chromosome
of FISH
Signals
1. When taking photographs with Kodak Ectachrome P800/1600 film, push the exposure to 3200 ASA (exposure times about 1 s for DAPI, 4-7 s for PI and/or FITC) For Kodak 400 TMAX black/white films, the exposure time will be longer 2 Locate the FISH signal to the appropriate chromosomal band by superlmposmg two photographic slides of the same chromosome set-one slide taken of the FITC-PI image and another of the DAPI image (see Note 7).
3.4. Heating
to Enhance
the Banding
Differentiation
Heating after FISH detection is an additional way to get good quality bandmg differentiation. Usually, if the slide denaturation conditions are very well controlled before hybridization, good quality bands should appear. However, if the chromosome banding is not good enough, heating may be used to improve the DAPI banding pattern. To determine whether there is good differentiation, partial C band may be used as an index. If there are no partial C bands yet, more heating is needed. In contrast, if all C bands appear, it is not necessary to heat further, since C bandmg IS the final stage of the DAPI banding process (Fig. 2C-E) 1. Use DAPI filter to choosethe mitotic chromosomes 2. Check the FISH signals as well by switching to the FITC filter 3 If the FISH signalsare satisfactory but the DAPI banding drfferenttatron IS poor, take a photograph of FISH signalswith FITC filter and then locate and center the chromosomesm the field of view of a fluorescent microscope with the DAPI filter and expose to UV for at least 10-20 s 4 Remove the slide from the microscope without moving the stage and heat the slide on a hot plate to 55-70°C for IO-15 s (seeNote 8) 5. Check the DAPI banding differentiation under mrcroscope If the multiple banding drfferentration is stall uncompleted, the heating may be repeated until the desired result is achieved (seeNote 9)
See Note 10 for concludmg remarks on the above method. 4. Notes 1. Overcrowded chromosomespreadsusually result m higher background of FISH detection and should therefore be avoided
FISH
on DAPI-Banded
Chromosomes
Fig 2. (A) Abnormal nuclei generated by improper storage of the slide. This slide should therefore not be used for FISH. (B) Extended hybridization will destroy the chromosomes and nuclei on the slides. The picture shows the destroyed nuclei from which the DNA stained by DAPI has been lifted off the slide after prolonged hybridization. (C-E) Relationship between denaturation and the quality of the DAPI banding. (C) After less than 1 min denaturation at 70°C in 70% formamide, good banding pattern appeared. (D) After 2 min denaturation, only C banding pattern remained. (E) After 4-5 min, there is no strong DAPI staining on the majority of the chromosomes. 2. Proper slide storage is important to ensure strong FISH signals and low back-
ground. By using the suggested method, the slides can be stored for up to 3-6 mo. If the slides are kept at room temperature, the chromosomes or nuclei may dry out after a few weeks, resulting in abnormal morphology. The presence of nuclei like those shown in Fig. 2A indicates that the slides were improperly stored and should not be used for FISH detection.
Heng
and Tsui
3. Baking the shdes is important for good FISH detection. It seems that the function of the baking is not Just to ensure that the chromosomes remam attached to the slides, but it also improves the quality of the FISH signal by reducing the background. However, overbaking may destroy the higher order structure of the chromosomes, which will reduce the quality of the bandmg pattern as well as cause the looping out of the 300 A chromatm fiber, thus, misrepresenting its location relative to the naturally packaged chromosome. For example, overbakmg may result in the locahzatton of the FISH signals outside the chromosome at higher frequency (16). Therefore, we suggest that the temperature and the time of the baking should be carefully controlled. 4 Controllmg the denaturatlon conditions during the FISH process is the key element to obtain FISH signals as well as DAPI bandmg pattern Our previous experiments showed that the best DAPI banding differentlatton may be obtained within 30-40 s by using the routme denaturing buffer (7O”C, 70% formamide in 2X SSC) (9,16). Therefore, the standard denaturation protocol of 2 min or more is too long. However, smce the hybridization efficiency is also related to the denaturation time, it is not advisable to use only 30 s for denaturation (even though some repetitive probes, YAC probes, and phage probes give very good results). To ensure good hybrtdization as well as DAPI banding pattern, a compromise between the hybridization efficiency and the banding quality is therefore necessary Even though our experience indicates that the denaturatton time should be kept to a muumum (~1 min) and additional heating may be apphed to achieve the desirable DAPI bandmg after FISH detection, experimental variations must be considered To ensure the best results, we suggest that two slides be used m the same hybridtzation experiment, differing only m denaturation time, 1 min and 1 5 min. 5. Longer hybridization time may increase the efficiency of probe penetration and detection. Extended hybridization, however, will change the morphology of chromosomes as well as interphase nuclei For example, hybridization times of more than 1 wk will result m many chromosomes or nuclei becoming detached (Fig. 2B) 6. Our protocol produces Q banding after FISH detection and DAPI stammg. In contrast, PI stammg gives reversed banding (R bandmg). Even though the DAPI and PI can be used together to generate R or G bandmg on the same mttotic figure by simply using different filters, the relative proporttons of the two dyes must be controlled since they may interfere with each other Too much PI will decrease the contrast of the DAPI banding pattern. Since the DAPI Q banding is much more distmcttve than PI R banding, and since the PI counter staining makes it easy to locate FISH signals in a particular region of the chromosome, we suggest that DAPI and PI be used together with reduced proportions of PI The ratio we suggest is antifade solution. PI counterstaining solution of 3.1-5: 1 7 To locate the FISH signal to the DAPI banded chromosome, we have also developed a simple approach of double exposures of FISH images. Typically, we expose FITC signals for 4-5 s, then expose DAPI pattern on the same film for 1 s by double exposure. Two factors should be considered: First, the imaging of DAPI and FITC will not be perfectly aligned In order to get precise locahzatton, around 10 mitotic figures should be used for position determmation Second, when this
FISH on DAPI-Banded
Chromosomes
47
method is used, PI staining should be avoided, since the PI counterstainmg will reduce the DAPI banding differentiation after double exposure. 8. The heating temperature and time should be carefully watched during the heatmg process. Usually one needs a longer time to achieve the banding differentiation by using a lower temperature (55’C) than a hrgher one (6%7O’C). The advantage of using a lower temperature is that it allows easier control. We suggest trying lower temperature first. 9. Since the timing of the banding differentiation varies among chromosomes even in the same mitotic figure, it may be necessary to optimize the banding conditions just for the chromosome of mterest Other chromosomes may be over- or under-differentiated. 10. In conclusion, the rationale for the BrdU-mcorporation-related banding is that the early and late replicated chromosomal DNA can be distinguished by controlling the timing of BrdU mcorporation and subsequent BrdU-related detectron. The early replicating DNA is usually located in R bands, whereas the late repheating DNA is found in Q or G bands (17-19). The BrdU incorporation time and the DAPI detection method we use will generate Q bands, which are simrlar to G bands Similar protocols have been used to detect FISH signals on banded chromosomes (.5,6) However, the banding qualities were not ideal for either FISH detectron or just DAPI bandmg alone (20). During the study of DAPI banding and its transition, we found that BrdU-DAPI banding differentiation is largely dependent on the chromosomal denaturatlon step. By simply controlling the degree of denaturatlon of the chromosomal DNA by formamide treatment or heatmg, we are able to obtain high-quality DAPI multrbandmg (Q banding), partial C banding, and C banding These different types of banding can also be successfully used m conjunction with FISH detection (9-12). Our results demonstrate that the conventional denaturation conditions of FISH detection are too prolonged to generate hrgh-quality DAPI banding. The standard denaturation time can be reduced to give both good FISH signals and high-quality DAPI bandmg ~9~21).
It has been difficult to hybridize some probes derived from Giemsa dark bands to R-banded chromosome spreads (22). However, these probes could be successfully localized using DAPI-banding method (22,231. To explain this discrepancy, it was suggested that the unsuccessful hydridization might be due to the loss of target DNA durmg the R-bandmg process (23). Acknowledgments We thank P. Moens and B. Spyropoulos for their continued support and J. Squire for the discussion of the protocols. We also thank X. M. Shi for her excellent assistance and S. Scherer for YAC probes. This work was supported by funds from the Canadian Network of Centers of Excellence (Genetic Disease Network) and the Howard Hughes Medical Institute (International Scholarship Award). H. H. Q. Heng holds a student award from the Medical Research Council of Canada; L.-C. Tsui is the Sellers Chair in Cystic Fibrosis Research,
Heng
and Tsui
References 1 Ltchter, P , Tang, C -C , Gall, K , Hermanson, G , Evans, G , Housman, D , and Ward, D (1990) High-resolution mapping of human chromosome 11 by m situ hybrrdtzatron wtth cosmid clones. Scrence 247, 64-69. 2 Bhatt, B , Burns, J , Flannery, D , and McGee, J 0 (1988) Direct visuahzation of single copy genes on banded metaphase chromosomes by nonisotopic in situ hybridization Nuclerc Acid Res. 16,3951-3961
3 Klever, M , Grond-Gmshach,C , Scherthan,H , and Schroeder-Kurth,T M (1991) Chromosomalm situ suppression hybridtzatton after Giemsabanding Hum Genet 86, 484-486 4 Korenberg,J R and Rykowski, M C (1988) Humangenomeorgamzatron:Alu, hnes, and the molecularstructure of metaphasechromosomebands Cell 53, 391-400. 5 Lichter, P , Boyle, A , Cermer,T , andWard, D. (1991)Analystsof geneandchromosome by nonisotopicm sttu hybridization GATA 8,24-35. 6 Fan,Y -S , Davis,L M , andShows,T B (1990)MappmgsmallDNA sequences by fluorescencem situ hybridizationdirectly on bandedmetaphase chromosomes Proc Natl. Acad Scr USA 87,6223-6227
7 Dworzak, M , Stock, C , Strehl, S , Gadner,H , andAmbros,P F (1992)Ewing’stumor X mousehybridsexpressingthe MIC2 antigen.analysesusmgfluorescenceCDD-bandmg and non-isotoptcISH Hum Genet 88,273-278 8 Puckett, C , Gomez,C M , Korenberg,J R , Tung, H., Merer, T J., Chen,X-N , and Hood, L (1991) Molecular clomngandchromosomallocalrzattonof one of the human glutamatereceptorgenesProc Nut1 Acad Ser. USA S&7557-7561 9 Heng,H H Q andTsut, L -C (1993)Modesof DAPI bandingandstmultaneous m sttu hybridization Chromosoma 102,325-332 10 Heng, H H Q , Shi, X -M , and Tsui, L-C (1993) Fluorescencem situ hybrtdrzation mappingof the cystic fibrosis transmembrane conductanceregulator (CFTR) gene to 7q31.3 Cytogenet Cell Genet 62, 108,109 11. Heng,H H Q., Shi, X -M., Brunkow, M , Scherer,S , Moens,P., andTsur, L. C (1994) FISH detectionby usmggel purified total yeastDNA probe-a quackandreliablemethod to mapYAC cloneson humanandmousechromosomes (submitted) 12 Heng,H H. Q , Shr, X M , andTsui, L -C (1993)Refinedlocahzatronof the asparagme synthetasegenelocus(ASNS) to chromosome 7, regionq21 3, andcharacterizationof the somaticcell hybrid line 4AF/106/KO15 Cytogenet Cell Genet. 66, 135-138 13. Heng, H H. Q , Chen, W. Y , and Wang, Y. C (1988) Effects of pmgyanymycin on chromosomes.A possiblestructural bastsfor chromosomeaberratron Mutation Res 199,199-205
14. Grossberger,D (1987) Mmipreps of DNA from bacteriophagelambda.NuclercAcids Res 15,6737
15. Schere, S. and Tsui, L.-C (1991) Cloning and analysisof large DNA molecules,rn Advanced Technzques m Chromosome Research (Adolph, K , ed ), Marcel Dekker, New York, pp 35-72. 16 Heng,H H Q., Shi, X -M., andTsut, L -C. (1994)Unusuallocationof m situ hybridization signalsalong the chromosomeresultsfrom dtsruptmgits high-orderstructure (in preparation). 17 Dutrillaux, B , Couturier, J , Richter, C -L , andViegas-Pequignot,E (1976) Sequence of DNA replicationm 277R- andQ-bandsof humanchromosomes usingBrdU treatment Chromosoma
S&51-61
18. Camargo,M. and Cervenka,J (1982) Patternsof DNA rephcattonof humanchromosomesII. Replication mapand rephcatton model.Am. J Hum Genet 34, 757-780
FISH on DAPI-Banded
Chromosomes
19 Heng, H H Q , Chen, W Y , and Yoslda, T H (1986) Studies on amphibian chromosomes by the high resolution bandmg technique used for the high resolution R-bandmg m frogs Proc Jap. Acad. 62,53-56 (Ser B) 20. Sumner,A T (1990)Bandmgwith fluorochromesotherthanqumacrine,m Chromosome Bandmg (Sumner,A. T , ed ), UnwmHyman, London,pp 155-186 21 Heng,H H Q , Sqmre,J , andTsul, L -C (1992)High resolutionmappmgof mammalian genesby m situhybridizationto free chromatmProc Natl. Acad Scl USA 89,9509-95 13 22 Takahashi,E -1 , Yamauchl,M., TSUJI, H , Hltoml, A , Meuth, M , andHorl, T.-A (1991) Chromosome mappmgof the humancytldme-S-tnphosphatesynthetase(CTPS) geneto band 1~34I-~34.3 by fluorescence in situ hybrldrzatlon Hum Genet 88, 119-121 23 Nakashlma,H , Sakal,M , Inaba,R., andImamura,T (1994)Isolationandfluorescencem situ hybrldlzatlon mappingof 60 cosmldcloneson humanchromosome 18. Genomrcs 19, 577-580
CHAPTER 5
Generation of Alphoid DNA Probes for Fluorescence In Situ Hybridization (FISH) Using the Polymerase Chain Reaction Christoph Lengauer, Ian Dunham, Terry Featherstone, and Thomas Cremer 1. Introduction Alpha satellite DNA is a primate-specific family of tandemly repeated sequences present in the centromeric regions of all human chromosomes (I3). The basic unit is a monomer repeat of approx 170 basepair (bp) that contains both sequences conserved among the different chromosomes and variable regions. Blocks of consecutive monomers comprise a chromosome-specific higher-order repeat of up to several kilobases (kb) m size. For most human chromosomes, specific multimeric higher-order repeat units have been described (for review, see ref. 4). 1n situ hybridization of probes cloned from the conserved regions of the alphoid monomer has been applied to human metaphase spreads to pinpomt all centromeric regions simultaneously (5). Such a definition of centromeric regions of all chromosomes may provide marker signals helpful for automated chromosome analysis, in particular m the case of an automated evaluation of radiation-induced dicentric chromosomes (6). In clnncal cytogenetics, chromosome-specific alphoid probes have become an important aid for the detection of specific numerical chromosome aberrations at all stagesof the cell cycle (e.g., 7-11). In addition, such probes have been exploited in studies of chromosome topography m interphase nuclei and in nuclei of termmally differentiated cells (12-14). The generation of alphoid DNA probes by clonmg procedures is time-consuming and cannot easily be performed m all cytogenetic laboratories. The polymerase chain reaction (PCR) provides a more rapid and easy alternative to generate such probes. Two protocols are described below: The first protocol makes use of ohgonucleotide primers for conserved regions of the a-satellite monomer (15,16). In this approach, the specificity of the PCR-generated alphoid probes varies with the source of DNA used for amplification, Using From Edlted
Methods O-IMolecular Biology, Vol 33 In SIIU Hybrrdrzabon Protocols by K H A Choo CopyrIght 6 1994 Humana Press Inc , Totowa, NJ
51
52
Lengauer et al.
human genomrc DNA as a source, probes that hybridize to the centromeric regions of all chromosomes can be obtained, whtle DNA from somatic hybrid cell lines contaming smgle human chromosomes, or DNA prepared from flowsorted human chromosomes can be used to generate probes for the spectftc pertcentromertc stammg of mdivtdual chromosomes (I 7). The second protocol mcludes ohgonucleotide primers for chromosome-specific variable regions of the a-satellite monomer. Using human genomic DNA as a source for PCR, this latter protocol allows the generation of chromosome-specific probes (17) (see Note 1). 2. Materials 2.1. PCR
with
Primers
from
Conserved
Regions
of the Alphoid Monomer 1 Genomm DNA (100 ng) preparedfrom (a) male human blood, (b) somatic hybrrd
2. 3. 4 5 6.
7. 8
cell lmes contammg a certain human chromosome, and (c) hbrarres of flow-sorted human chromosomes, cloned m the Bluescribe vector (Stratagene, La Jolla, CA) and kindly provided by Joe Gray (Umversity of California, San Francisco). Disposable gloves. Set of mmrohter prpets (e.g , Gilson). Eppendorf tubes (2 2 mL) with a conical bottom and screw caps. 5X PCR-buffer. 50 mMTris-HCl, pH 8 4,250 mM KCl, 7 5 mM MgCl,, 0 005% gelatin This buffer is stable at -20°C for at least 3 mo dNTP-mix. Prepare stock solutron containing all four dNTPs at a concentratron of 1 mM from nucleotrdes purchased from Boehrmger Mannhelm (GmbH, Mannhelm, Germany) (100 rruI4 solutions) and store at -2O’C for several weeks Thermus aquatmu (Taq) DNA polymerase (Native Taq; Perkm-Elmer/Cetus, Norwalk, CT) Oligonucleotrde primers a27 and a30 directed to conserved regions located at the 5’ end of the human a-satellite monomer (17) a27.5’
CAT CAC AAA GAA GTT TCT GAG AAT GCT TC 3’
a30* 5’ TGC ATT CAA CTC ACA GAG TTG AAC CTT CC 3’
9 10 11 12 13 14. 15 16.
Dissolve prrmers m double dlstrlled water to yield a 100+&f solution each. MIX the two solutions 1.1 to give a final concentration of 50 pM for each primer Store at -20°C. Salmon sperm DNA sheared or DNase digested to a size of approx 500 bp (Sigma, St Louis, MO) 20X SSC. 1X SSC is 150 mM NaCl, 15 mM sodium citrate, pH 7 0. Paraffin or1 (light mineral oil) Thermocycler. We use the Thermocycler 60 (BioMed, Theres, Germany) in all our experiments. Seakem ME agarose (FMC Broproducts, Rockland, ME) 50X TAE* 2M Tns-acetate, pH 8 O,O.O5M EDTA 1% Ethrdmm bromide DNA gel electrophoresis apparatus.
FISH Using PCR-Generated
Alphoid Probes
2.2. PCR with Primers from Chromosome-Specific Alphoid
53 Regions
1. 2. 3. 4. 5.
Genomrc DNA purified from human blood (500 ng) Disposable gloves. Set of microhter pipets (e g., Gilson). 0.6-mL Eppendorf tubes. 10X PCR-buffer 100 mM Tris-HCl, pH 8.4, 500 mM KCl, 25 m/14 MgC12, 1.7 mg/mL bovme serum albumm. 6. dNTP-mix Prepare stock solution containing all four dNTPs (Boehrmger Mannheim) at a concentratton of 5 mM and store at -2O’C for several weeks 7. Thermus aquaticus DNA polymerase (Native Taq; Perkin-Elmer/Cetus). 8. Oligonucleotide primers directed to chromosome-specific regions of alphotd monomers. The following primer pairs can be used to generate probes specific for the pericentromerrc heterochromatm of each of the chromosomes 1, 6, 7, 17, or X (see Note 2). a. chromosome l-specific primers (18): alE6: 5’ GGC CTA TGG CAG AGG ATA TAA CTG CC 3’ alA7.5’
GTG AGT TTT CTC CCG TAT CCA ACG AAA TCC 3’
The length of the amphfrcation product is 201 bp. b chromosome 6-spectftc primers (19): a6E* 5’ ACT GTG GGC TTC AAT GCC GC 3’ a6F: 5’ GCC TAC GGC AGA AAA AGA AAC C 3’ The length of the amplification product is 182 bp. c chromosome 7-spectftc primers (20). a7A 10.5’ TTC ATT GGA ATC GCG AAT AC 3’ a7A12: 5’ CAA GAA GGC TTC AAA GCA CC 3’ The length of the amphftcation product is 348 bp. d. chromosome 17-specific primers (18,21): a17Al:
5’ AAT TCG TTG GAA ACG GGA TAA TTT CAG CTG 3’
a17B2: 5’ CTT CTG AGG ATG CTT CTG TCT AGA TGG C 3’ The length of the ampliftcation product is 227 bp. e. chromosome X-specific primers (22): aXCl1:
5’ ATT TCT TTG GAA TCG GGA ATA TTT CCA CAG 3’
aXD 12: 5’ CTC TCG TCT TTC TGT GAA GAT AAA G 3’ The length of the amplification product is 212 bp. Dissolve primers in double distilled water to yield 25-w solution and store at -20°C. 9. Paraffin oil (light mineral oil). 10. Thermocylcer (Perkm-Elmer/Cetus).
54
Lengauer
et al.
3. Methods In this chapter, we have emphasized mainly the procedures for the generation of the alphoid probes and refer the readers to other chapters (e.g., Chapters 4 and 10) in this volume for a more detailed description of the FISH method. 3.1. PCR
with
Primers
from
Conserved Monomer 3.1.1, Performing the PCR
Regions
of the Alphoid
A PCR carried out in a final volume of 5 PL yields some 1 pg of amplified products sufflcent for 50 to 200 FISH experiments. Several identical PCRs are performed simultaneously and amplification products are pooled thereafter. For each PCR: 1 Prepare the following reaction mix m a 2 2-mL Eppendorf tube a. 1 PL of 5X PCR-buffer; b 1 yL of dNTP-mix (1 mM each); c. 1 PL of primer-mix (each primer 50 j04), and d. 100 ng of a DNA source (see above) e If necessary, double distilled water is added to adjust the volume of the reactlon mix to 4 FL. 2 Add 1 PL of Taq DNA polymerase (2.5 U&L) and mix gently 3. Overlay the reaction mix with about 50 PL paraffin oil This step can be omitted when using the Thermocyler 60 (BioMed). 4 Place the samples in the thermocyler. For the BioMed machine, perform PCR cycles as follows* a. 95°C for 3 mm; b 95°C for 50 s; c 64’C for 2 mm, d. 72°C for 3 min, e repeat steps b-d for a total of 30 cycles; and f. 72’C for 4 mm. 5. Store amplification products at +4”C (up to 1 mo) or at -20°C for more extended periods.
3.1.2. Analyzing
the Reactions
1. Prepare a 100 mL agarose gel (1.2%). Bring the solution to a boil in a microwave oven until all agarose has dissolved. Cool the solution to 55”C, add ethidium
bromide (final concentrationof 0.5 pg/mL) and pour onto a gel tray. 2. Remove the overlay of oil from the reaction mix. This is done by adding 50 PL of chloroform, mixing and cenhfuging for 10 s The oil dissolves m the CHC13 (bottom layer). Remove the reaction mix (top layer) with a mlcrohter pipet AlternatIvely, use a microliter pipet to directly take up the reactlon mix below the 011 layer. Remove oil adhering to the pipet tip with a Kimwipe tissue paper. Note that any remaining oil will interfere with the migration of the DNA through the gel 3. Load a 5-PL aliquot from a pool of several identical PCRs on the gel and electrophorese at 120 V for 1 h 4 Observe the gel on a UV transilluminator.
FISH Using PCR-Generated
Alphoid
Probes
55
ABC
Fig. 1. Agarose gel (1.2%) of alphoid DNA sequences obtained by PCR of DNA of the human-hamster hybrid cell line Cl21 containing the human X chromosome as the only human chromosome material (lane A) and male human genomic DNA (lane B) with the primer pair a27/a30 directed to the alphoid consensus region. Lane C: 123-bp ladder.
An appropriate gel shows a distinct band at approx 170 bp and a ladder of multimers which ends in a smear of up to 3 kb (Fig. 1). 3.1.3. Probe Labeling and FISH 1. Label PCR-products with an appropriate hapten, e.g., biotin-1 I-dUTP, by nick translation using, for example, the nick translation kit of GIBCO BRL/Life Technologies (Gaithersburg, MD), following the instructions of the supplier. 2. Separate labeled probe from unincorporated nucleotides by standard gel filtration such as using a spin column. 3. Perform fluorescence in situ hybridization and washing procedures as described (23). Prepare the following hybridization mix (sufficient for one slide using a 24 x 50 mm coverslip): a. 5-20 ng of labeled PCR amplified DNA; b. 5 pg Salmon sperm DNA; c. 5 l.tL 20x ssc; d. Deionized formamide to a final concentration of between 50% and 70% (see Note 3); and e. Double distilled water to a vol of 50 pL.
Lengauer
56
et al.
4 Add the 50 p.L hybridization mixture to a slide with methanol/acetic acid (3: 1 v/v) fixed human chromosome spreads 5 Put a 24 x 50 mm covershp on the hybridization mixture droplet and seal the edges of the coversllp with rubber cement. 6. For DNA denaturatlon, transfer the slide into a prewarmed metal box floating in a 73’C waterbath for exactly 10 min 7 Transfer the box containing the slides to a 42°C waterbath and incubate overmght. 8 Perform washing and detection steps as described in other chapters m this volume Some typlcal results are shown m Figs. 2A-C. 3.2. PCR with Primers Chromosome-Specific Alphoid Regions 3.2.1. Performing the PCR For each PCR, prepare the following reaction mix in a 0.6 mL Eppendorf tube. a 2.5 PL of 10X PCR-buffer; b. 1 PL of dNTP-mix (5 mM each), c. 1 PL of each of the two primers (25 PM each), and d 500 ng of human genomlc DNA. Add double dlstllled water to a vol of 25 PL Add 1 PL of Tuq DNA polymerase (1 25 U/pL). MIX gently. Add 25 PL of paraffin oil. Place samples m an automatic thermocyler. For the Perkm-ElmerKetus machine, perform PCR cycles as follows. a 94”C, for 2 mm; b. 94”C, for 1 mm, c. 65”C, for 2 min, d 72’C, for 2 min, e. Repeat steps b-d for a total of 25 cycles, and f 72”C, for 4 mm. Store amplification products at +4”C (up to 1 mo) or at -2O’C for more extended periods from
1
2. 3 4. 5.
6
3.2.2. Analyztng the Reactions, Probe Labeling, and FISH Analyze the PCR amplified products by gel electrophoresis and label the probe as described m Sections 3.1.2. and 3.1.3. As an alternative to nick translation, labeled nucleotides, e.g., blotin-l I-dUTP, can be incorporated durmg the PCR using dATP, dCTP, dGTP at a final concentration of 200 @4 each, and d’ITP as well as blotin-l I-dUTP at a final concentration of 100 PM each. In situ hybndizatlon, washing, and detectlon procedures are performed as described (23). An addltlonal washing step with 0.1X SSC at 60°C for 7 mm is routinely included. In case of cross-hybridization to the pericentromerlc heterochromatm of other chromosomes than the target chromosome the addition of 10 pg/ mL unlabeled total human DNA or 1 pg/mL alphold DNA amplified with the primer pair a27/a30 (see Section 2.1.) step 8) to the hybridization mixture, and more stringent washing steps can be tried to improve the specificity (Note 3).
FISH
Using
PCR-Generated
Alphoid
Probes
57
Figure 2D shows a normal human lymphocyte metaphase spread after FISH with a probe generated from human genomlc DNA with a chromosome 17specific primer pair. 4. Notes 1. The usefulness of the described protocols for PCR-generation of chromosomespecific alphoid probes depends on several factors. A major source of ambtguity which limits the usefulness of alphoid DNA probes for the identification of individual chromosomes stems from the fact that the alphoid sequences of some chromosomes are closely related (18). The construction of oligonucleotrde primers for defined subregions of alphoid monomers can be helpful to generate alphoid DNA probes with improved specificity for a given chromosome. The selection of such primers, however, can be drfficult and the results are sometimes not predictable in advance. 2 In addition to the primers presented here, primer sets allowing amphfrcation of subsets of a-satellite DNA specific for each of chromosomes 3 and Y have been published by Warburton et al. (24) a. chromosome 3-specific primers* 3-A. 5’ TCT GCA AGT GGA TAT TTA AA 3’ 3-B: 5’ TGA GTT GAA CAC ACA CGT AC 3’ The lengths of the amplification products are 1.28 and 0.95 kb b Y-chromosome-specific primers: Y-A: 5’ TGA AAA CTA CAC AGA AGC TG 3’ Y-B: 5’ ACA CAT CAC AAA GAA CTA TG 3’ The length of the amphftcation product is 1 0 kb For the amplification of alphoid regions specific for chromosomes 7, 17, and X, Warburton et al. (24) have described different primer pairs that are also very useful for in situ hybridization experiments a. chromosome 7-specific primers: 7-A: 5’ AGC GAT TTG AGG ACA ATT GC 3’ 7-B. 5’ CCA CCT GAA AAT GCC ACA GC 3’ The lengths of the amplificatron products are 1.O, 0 68, and 0.34 kb. b. chromosome 17-specific primers 17011.5’ AAT TTC AGC TGA CTA AAC A 3’ 17a2: 5’ TTT AGT TAG GTG CAG TTA T 3’ The length of the amplification product is 850 bp. c. X chromosome-specific primers: X-3A. 5’ ATA ATT TCC CAT AAC TAA ACA CA 3’ X-4A* 5’ TGT GAA GAT AAA GGA AAA GGC TT 3’
58
Lengauer
et al.
FISH Using PCR-Generated
Alphoid
Probes
59
Fig. 2 (beginning on opposite page). FISH of alphoid DNA probes to nomal human lymphocyte metaphase spreads (46,XY or 46,Xx). Probes are labeled with biotin-1 I-dUTP and detected with Avidin-PITC. Chromosomes are counterstained with propidium iodide. (A-C) Probes generated by PCR with the oligonucleotide primer pair a27/a30 directed to the alphoid consensus region. (A) FISH using an alphoid probe generated from male human genomic DNA. Note signals on the pericentromeric heterochromatin of all chromosomes of a male metaphase spread. (B) FISH using an alphoid probe generated from the human-hamster hybrid cell line Cl21 containing the human X chromosome as the only human chromosome material. The pericentromeric heterochromatin of the two X chromosomes contained in a female metaphase spread and adjacent interphase nuclei is delineated. (C) FISH using an alphoid probe generated from a plasmid DNA library of flow-sorted human chromosomes 8 selectively decorates the pericentromeric heterochromatin of the respective target chromosomes in a male metaphase spread (see Note 4). (D) Probe generated by PCR of total genomic human DNA with the chromosome 17-specific oligonucleotide primer pair a17Alla17B2. Signals are restricted to the pericentromeric heterochromatin of both chromosomes 17.
60
Lengauer
et al.
The length of the amplification product IS 850 bp. 3. The strmgency of m svu hybrichzation plays a crucial role in avolchng crosshybridization to other chromosomes (7) For example, the specificity of chromosome-specific PCR-amplified probes critically depends on the formamide concentration, the optimum level of which has to be tested empirically 4 Note that if chromosome-specific hbranes are used as PCR templates, the specsflcity of probes generated with primers directed to the conserved region of the alphoid satellite monomer may be llrmted by the presence of alphoid sequences from other chromosomes resulting from impurities during flow-sorting.
References 1. Manuehdis, L (1978) Chromosomal locations of complex and simple repeated human DNAs Chromosoma 66,23-32. 2 Rosenberg,H M , Singer,M F , andRosenberg,M (1978) Highly reiteratedsequences of Simian.Scrence 200,394-402 3 Willard, H F. (1985)Chromosome-speclflc organizationof humanalphasatelliteDNA Am J Hum Genet. 37,524-532
4 Choo,K H , Vessel,B., Nagy, A , Earle,E , andKalitsls,P (1991)A surveyof thegenomlc distribution of alphasatelliteDNA on all the humanchromosomes, and derivation of a new consensus sequenceNucl Acids Res 19, 1179-l 192. 5. Mitchell, A. R , Gosden,J R., and Miller, D A. (1985) A clonedsequence,pH82, of alpholdrepeatedDNA foundat thecentromeres of all humanchromosomes Chromosoma 92,369-377 6. Meyne, J., Littlefield, G , andMoyzls, R K (1989)Labelingof humancentromeres using
an alpholdDNA consensus sequenceapphcatlonto the scoringof chromosome aberrations Mut Res. 226,75-79. 7 Cremer,T , Landegent,J., Bruckner,A , Scholl,H P , Schardm,M , Hager,H. D , Devllee, P , Pearson,P , andvan der Ploeg,M (1986)Detectionof chromosome aberrationsm the humannucleusby visuallzattonof speclflctargetDNAs v&h radioactiveandnon-radloactlve in situ hybridization techniques.diagnosisof trlsomy 18 with probe Ll 84 Hum Genet 74,346-352.
8 Cremer,T ,Tesm,D , Hopman,A H N ,andManuehdls, L (1988)Rapidinterphase andmetaphaseassessment of specificchromosomal changesm neuroectodermal tumor cellsby m situ hybridization with chemicallymodifiedDNA probesExp Cell Res 176, 199-220 9 Hopman,A. H N., Poddighe,P J , Smeets,A W G B , Moesker,0, Beck, J L M., VooiJs,G P , and Ramaekers, F. C (1989) Detectionof numericalchromosome aberrationsm bladdercancerby m situ hybrldlzatlon Am. J Path 135, 1105-l 117 10 Anastasi,J , Le Beau,M. M , Vardlman,J W , andWestbrook,C A (1990)Detectionof numericalchromosomal abnormahtles m neoplastichematopoletlccellsby m situ hybndizatlon with a chromosome-specific probe.Am J Path 136, 13l-139 11 Poddlghe,P J., Moesker,0 , Smeets,D , Awwad, B H., Ramaekers, C S., andHopman, A H N (1991)Interphasecytogenetlcsof hematologlcalcancer’comparisonof classical karyotyping and in situ hybridizationusinga panelof elevenchromosome specificDNA probes.Cancer Res 51,1959-1967 12 Manuehdis,L. and Borden, J (1988) Reproduciblecompartmentahzatlon of mdlvldual chromosomedomainsin humanCNS cells revealedby m situ hybrldlzatlon and threedimensionalreconstructionChromosoma 96,397-410 13 Emmench,P , Loos,P., Jauch,A , Hopman,A. H N., Wlegant,J , Higgins,M , White, B N , van der Ploeg,M , Cremer,C., and Cremer,T (1989) Doublem situ hybrldlzatlon with digital imageanalysis.A newapproachto studyinterphasechromosome topography Exp. Cell Res 181, 126-140
FISH Using PCR-Generated
Alphoid
Probes
14 Popp, S., Scholl, H P., Loos, P , Jauch, A., Stelzer, E , Cremer, C , and Cremer, T (1990) Distribution of chromosome 18 and X centrtc heterochromatm in the interphase nucleus of cultured human cells Exp. Cell Res 189, 1-12 15 Koch, J. E , Kolvraa, S , Petersen,K B., Gregersen,N , and Bolund, L (1989) Oligonucleotide-primingmethodsfor thechromosome-specific labelhngof alphasatelhteDNA m situ. Chromosoma 98, 259-265. 16 Weier, H U , Kleine,H D., andGray, L. W (1991)Labelingof the centromertcregionon humanchromosome 8 by m situ hybrtdtzation. Hum. Genet. 87,489-494. 17 Dunham,I , Lengauer,C , Cremer,T., andFeatherstone,T (1992) Rapidgenerationof chromosome-specific alphoid DNA probesusmgthe polymerasecham reaction. Hum Genet g&457-462
18 Wtllard, H F andWaye,J S (1987)Chromosome-specific subsets of humanalphasatellite DNA: analysisof sequence dtvergencewithin andbetweenchromosomal subsetsand evidencefor an ancestralpentamencrepeat.J Mof Evol. 25,207-214 19.Jabs,E. W andPersico,M. G (1987)Charactenzattonof humancentromencregions of specificchromosomes by meansof alphoidsequences. Am. J. Hum. Genet. 41,374-390. 20 Waye, J S., England,S. B., and Willard, H. F (1987)Genomicorgamzatlonof alpha satelliteDNA on humanchromosome 7, evrdencefor two distinct alphotddomams.Mel Cell Blol. 7, 349-356
21 Waye,J S.andWtllard, H. F (1986)Structure,organizationandsequence of alphasatelhte DNA from humanchromosome 17 evtdencefor evolutionby unequalcrossmg-over andan ancestralpentamerrepeatwith the humanX chromosomeMol Cell Blol. 6, 3156-3165 22. Waye, J S andWtllard, H F. (1985)Chromosome-specrfrc alphasatelliteDNA* nucleotide sequenceanalystsof the 2 0 ktlobasepatrrepeat from the humanX chromosome Nuclecc Acids Res. 13, 273 l-2743
23. Ltchter,P.andCremer,T (1992)Chromosome analystsby non-rsotoptc m sttuhybrtdtzatron, m Human Cytogenetlcs. A Practical Approach, vol 1 (Rooney,D E. andCzepulkowskt, B. H , eds), IRL, Oxford University Press,Oxford 24 Warburton,P. E , Gretg, G. M , Haaf, T., andWtllard, H F (1991)PCR amplificationof chromosome-spectfic alphasatelliteDNA: defmitton of centromericSTS markersand polymorphicanalysisGenomlcs 11,324-333
CHAPTER 6 In Situ Hybridization
Using Synthetic Oligomers as Probes for Centromere and Telomere Repeats Julianne
Meyne and Robert
lit Moyzis
1. Introduction Telomeres and centromeres are critical structural and functional elements of eukaryotic chromosomes. Thus, they are important to our understanding of the organization and management of complex genomes. Termim of eukaryotic chromosomes are characterized by short, tandem repeats with a G-rich sequence on the 3’ end of the DNA strands. The telomeres of humans and all other vertebrates analyzed to date contain the same telomere repeat sequence, (TTAGGG), (1,2). In situ hybndrzation of telomere repeat probes has become a useful adjunct to the molecular analysts of eukaryotrc chromosome ends. Fluorescence in situ hybridization confirmed the presence of the (TTAGGG), sequence at the chromosomal ends and provided a visual documentatron that all telomeres m the genome have the same terminal repeat. During the last 5 years, in situ hybndizatton of the telomere sequence has been used for a vartety of studies (l-17). The integrity of the telomere as a structural and functional necessity for accurate chromosomal distribution during cell division has been supported by these studies. The centromere region of mammalian chromosomes is characterized by the presence of one or more satellite DNA famihes. The type and amount of repetitive DNA varies not only among chromosomes, but can also vary between homologs. In situ hybridization is a useful technique for mapping the chromosomal location of repetitive sequences in the pericentromenc regions of chromosomes and for visual analysis of polymorphrsms of these repeats. Chromosome-specific synthetic oligomer probes of alphoid DNA sequences are useful tools for clinical studies of aneuploidy, partrcularly for quantitatlon of chromosomes m interphase nuclei and analysis of marker chromosomes (18,19). Hybridization of synthetic probes of satellite DNA sequences are also being used as part of multrdisciplinary studies of the primary constriction or presumed functional centromere (20,21). Elucidation of the organization of the From Edited
Methods m Molecular Bology, Vol 33 In SIIU Hybrrdnatron Proloco/s by K H A Choo Copyright Q 1994 Humana Press Inc , Totowa, NJ
63
64
Meyne
and Moyzis
various repetitive sequences at or near the centromere may assist our understanding of this apparently complex structure. Synthetic oligomers are relatively small, single-stranded DNA probes, usually less than 50 nucleotldes in length (18-24). Synthetic DNA offers several advantages as probes for in situ hybridization of repetltlve DNA sequences. The exact sequence of the probe is known and controlled. Synthetic ohgomers can be constructed to specifications that: reproduce all or a segment of the sequence from any cloned repetitive DNA probe (18,19), reproduce all or a segment of a consensus sequence of a repeat family (20-24), or reproduce any modification of any sequence. The small size allows good penetration of the probe during the hybridization procedure. This is especially important for studies requiring analysis of interphase nuclei. Smgle-stranded probes do not selfanneal during hybridization, so not only can the probe concentration be easily controlled, but high concentrations of probe can be used without significant increases of background. Oligomers are readily available and a single synthesis will provide enough probe for several years of average laboratory use. Because they are very short, controlled sequence probes and the target DNA is abundant, synthetic ollgomers of repetitive sequences renature very rapidly during hybndizatlon. Thus, dextran sulfate or a similar hybridization enhancmg agent is not necessary m the hybrldlzation mix. Hybrldlzation time can be reduced to 3-5 h for many of the satellite sequences. On the other hand, hybndizmg for the more standard 16 h of most overnight mcubatlon procedures does not cause adetectable increase m nonspecific background. The probe contains only the sequence of interest, so there 1s no need for blocking with competitor DNA. The length restrictions for oligomer synthesis limit their usefulness as probes for single copy sequences. With the increased use of primed in situ labeling (PRINS) (25,26) and similar methods, however, the usage of synthetic ohgomers will become more common, especially as primers for the new methodologies. The Information presented here has been designed for synthetlc oligomers of repetitive sequences. The general prmclples, however, are apphcable to any type of hybrldlzatlon procedure usmg synthetic ohgomers.
2. Materials 1 Labeled telomere probes. These are synthesized as two separate 42-nucleotide oligomers having the sequences (GGGTTA)7 and (TAACCC)7 Oligomers can be prepared for Internal labelmg during automated synthesis (24). We prefer to enzymatically label ollgomer probes by tailing with a biotm-, digoxigenm-, or fluorochrome-labeled nucleotide using terminal deoxynucleotidyl transferase This enzyme can be purchased in kit form from a variety of sources. (See Notes 1,2, and 3.) 2. Labeled alphoid DNA centromerlc probes The 30-nucleotlde ohgomer sequence S-GTTTTGAAAC ACTCTTTTTG TAGAATCTGC-3’ hybridizes to the centromeric regions of all human chromosomes (23). Examples of alphold DNA
Synthetic Oligomers as Probes
3.
4.
9
10
11.
65
synthetic oligomer probes that are specific for the centromeric regrons of individual chromosomes are the 42-nucleotide oligomer specific for the centromeric region of chromosome 17,5’-CATTCAAATC CCCGAGTTGA ACTTTCCTTT CAAAGTTCAC GT-3’ (18), the 42-nucleotide oligomer specific for the centromerit region of chromosome X, 5’-GACGATGGAG TTAACTCAGG GAGCTGAACA TTCGTTATGA TG-3’ (19); and the 30-nucleotide ohgomer specific for the centromeric region of chromosome 18, 5’-GTACTCACAC TAAGAGAATT GAACCACCGT-3’ (27). Because alphoid DNA 1s present m long tandem arrays in all human chromosomes, only a single-strand of these repeats is necessary for strong hybrrdtzatron signals. These olrgomers are labeled as described for the telomere probes above Labeled human satellite simple sequence repeats. The 5-nucleotide simple sequence repeat common to human satellites 2 and 3 (22,281 is synthesrzed as (CCATT)4 or (AATGG)4. We prefer using the C strand, as the thermal stability of the G strand indrcates tt can form foldbacks or other complexes (21). The consensus sequence satellite 1 simple sequence probe 1s synthesized as a 42nucleotide probe, 5’-ACATAAAATA TCAAAGTACA CAAAATATAT ATTATATACT GT-3’. These repeats each identify specific subsets of centromerit regions within the human karyotype. These ohgomers are labeled as described for the telomere probes above. Metaphase chromosome or interphase cell slide preparations Metaphase spreads are prepared using standard protocols for hypotonic swelling and fixation m methanol-acetic acid fixative. Interphase cells can be prepared by fixation m solution or by growing the cells dtrectly on microscope slides or coverslips and fixing them in situ using the same procedures as for other types of probes Coverslips Standard #l glass coverslips and plastic coverslips The latter can be cut from autoclave bags or other suitable flexible plastic (see Note 4) Coplin jars with covers. Standard size for 3 x 1 m. microscope slides or, if hybridizing to cells grown directly on coverslips, the appropriate size for the coverslips used (see Note 5). Water bath(s) One water bath 1ssufficient, but two or three are far more convenient. The temperatures used are 70 and 42°C (see Note 6). 20X SSC, 2X SSC. Make 1 L of stock solution of 20X SSC (1X = 0 15Msodmm chloride and 0.015M sodmm citrate) and adjust the pH to 7. Set aside an ahquot of 50-100 mL of this solution for making hybrid mix and denaturing solutton. The rest is used as a stock for makmg up the 2X SSC to be used for making the RNase solutron and for washing slides. 1 mg/mL RNase in 2X SSC Incubate at 100°C for 10 mm to mactivate any DNase present. Cool and store at 4’C for dilution as needed. Make a working solution of 100 mg/mL m 2X SSC and store at 4°C. This solution 1s very stable and can be used for several months. Formamide. The formamide must be suitable for nucleic acid hybridization. Most catalogues will specify the grades available Store at 4°C for use within 3 mo and at -2O’C for longer term storage. Using lower grade formamide will not be worth the savings. 70% formamide in 2X SSC* 5 mL 20X SSC, 10 mL HzO, 35 mL formamide.
66
Meyne
and Moyzis
12 Carrier E. coli DNA (see Note 7) Dissolve E. coli DNA in sterile water at 5 mg/mL and shear by sonicatron If sizing gel technology is not available to check the fragment length after shearing, simply somcateuntil the solution is the consistency of water when inverted. If sizing gels are available, sonicate to
3. Methods 3.1. Hybridization 1. Select a slide with a generousnumber of metaphasesand a mmimum amount of cytoplasm around the chromosomes(seeNote 8). 2. Apply 100-200 mL of RNase (100 pg/mL m 2X SSC) to each slide and cover with a large coverslip, e g., 24 x 60 mm (seeNote 9) 3 Place slides m a moist chamber at 37°C for about 1 h 4 Wash the slides m four changes of about 2 min each m 2X SSC at room temperature. 5 Dehydrate through an ethanol series(70, 85, and 100%)
Synthetic
Oligomers
as Probes
67
6. Either air dry or dry with an au jet. 7 Prepare the hybridization mixture. For most ohgomers the following mixture will provide an adequate balance of specific hybridization and good signal detection (see Note 10). Final Cone Reagent 9 uL of formamide (DNA grade) 30% 2x 3 uL of 20x ssc 13 uL of water 500ug/mL 3 uL of E colt DNA 0.4 ug/mL 2 uL of probeDNA 30 uL of total mix perslidefor a 22 x 50 mmcoverslip 8 Heat the hybridization mixture at 70°C for 5 min to denature the DNA and then cool quickly in an ice bath (see Note 11). 9. Denature the chromosomalDNA by immersing the slides(preferably prewarmed at 70°C for l-2 mm) in a Coplm jar containing a solution of 70% formamide m 2X SSC for 2 min at 70°C (seeNote 12). 10 Transfer immediately to a Coplin jar of chilled 70% ethanol in an ice bath for at least 2 min, with periodic agitation. 11 Continue the dehydration with an ethanol seriesat room temperature and air dry (see Note 13) 12. Place the hybridization mixture on the slidesand cover with a 22 x 50 mm glass coverslip 13. Seal the coverslip with rubber cement and place in a moist chamber at 37°C for 3-18 h (see Notes 14 and 15). 14 After hybridization, peel off the rubber cement and remove the coverslip, either by gently lifting rt off (without scratching the slide) or by soaking it off in the first wash step. 15. Wash the slides in three changesof lo-30% formamide in 2X SSC for 3 mm each and then five changesof 2X SSC for 2 min each, all at 40-42”C. Gently agitate the slidesperiodically during each of the wash steps(see Note 16). 16 See Notes 17-19 for discussionson hybridization using synthetic oligomers of the human telomere and centromeric sequence.
of Hybridization Site The following detection procedure IS a fluorescent method using FITClabeled avldin. 3.2. Detection
1. After the final posthybridrzation wash, transfer the slides to BTS buffer (or the buffer being used for the detection system of your choice; seeNote 20). Do not allow the slides to dry out at any time during this procedure. 2. Drain the excessBTS buffer from the slide and apply 75 pL of 5% BSA in BTS buffer. 3. Mount with a plastic coverslip cut from an autoclave bag. 4. Incubate the slide for 5 mm at room temperature. 5. Peel off the coverslip and shakeoff the excess solutron 6. Add 75 pL of avrdin (3 pL/mL) in 5% BSA in BTS buffer
Meyne
and Moyzis
7. Reapply the cover&p and mcubate the slide m a moist chamber for 30-60 min at 37°C. 8. Remove the coverslip. 9. Wash in three changes of BTS buffer at 40-42’C for 2 mm each Agitate periodically during each wash 10 Transfer to a fresh solution of BTS buffer at room temperature (At thts point one can view the slrdes or continue directly with the amplification step For most probes and most protocols, you ~111 want to go straight to the amphfrcation.) 11 Drain the excess BTS buffer and apply 75 pL of 5% goat serum in BTS buffer 12 Incubate for 5 min at room temperature. 13. Peel off the coverslip and shake off the excess solution 14. Add 75 pL of anti-avidin antibody (5 pg/mL) m 5% goat serum in BTS buffer 15 Reapply the coverslip and incubate m a moist chamber for 30-60 mm at 37°C. 16 Remove the coverslip and wash in three changes of BTS buffer at 40-42”C for 2 mm each Agitate the slides penodtcally durmg each wash 17. Transfer to BTS buffer at room temperature. 18. Add another layer of avidm by repeating steps 2-10 19 The slides are now ready for viewing, although they can be stored m BTS buffer at 4°C for several days at this point. When ready to view the slides, drain the excess buffer, add a drop of antifade containing PI and DAPI, and mount wtth a coverslip (see Note 2 1) 20 Vtew the slides through a fluorescence mtcroscope with the appropriate filter sets (see Note 22).
4. Notes 1 The amount of DNA required for synthettc ohgomer probes IS much less than for native DNA preparations, such as plasmrds and cosmtds. 2. Nick translation is the labeling method of choice for most double-stranded, native DNA probes, but this method will not work for single-stranded synthetic oligomer probes 3 Be careful not to confuse tailing and end-labelmg reactions or kits The former adds a tail several nucleotides long to the 3’ end of the ohgomer. The latter adds only one nucleotide to the ohgomer. The srgnal obtained after hybrrdization of a tailed probe will generally be much greater than that from an end-labeled probe. We have not had any problem with accessibility, spectficrty, reproducibility, or stability of hybridization using the tarled ohgomer repeat sequence probes 4 The object of the plastic coverslips is to have a soft pliable system that will not scratch the cytological material on the shde when it 1s removed and replaced during mcubatlon steps 5. The slides or coverslips will each be handled many ttmes during the procedure, so optimal-size jars for the type of preparation used are a wise investment. 6. The temperatures gtven are those of the soluttons instde the Coplm jars. The temperature of the water m the bath must be adjusted to maintain these temperatures, usually 2-3°C above the temperature needed for the incubation solution A circulating water bath is best for the 70°C steps, and a reciprocating or shaker bath is helpful for the 42°C wash steps. If the only bath available for the 70°C steps ts one that 1s much larger than needed, try floating some Styrofoam packing
Synthetic
7.
8
9 10.
11
12 13
14 15 16.
Oligomers
as Probes
69
“peanuts” or similar material on the surface of the water between the edges of the water bath and the Coplin jar to cut down on evaporation while preheating the bath. The rule of thumb is to not use a carrier DNA from a species that contains the sequence being hybridized. If carrier DNA is not readily available, the hybridlzatron can be run without any carrier DNA. We prefer to use E. coli DNA because it does not have any of the common repetitive DNA sequences found m the genomes of the vertebrate specres studied in our lab. This is partrcularly important for the telomere probe (see Note 17) Other carriers, such as salmon sperm or herring sperm DNA, are suitable for hybridizations of most human satellite DNA sequences. Slides seem to be best a few days to one month after being made. A l-4 h incubatron m a 55-6YC oven may be useful in some climates or for very fresh slides Slide storage is a matter of what works m your lab. The systems range from -20°C storage in ordinary shde boxes to -70°C storage under nitrogen atmosphere. When slides will be used within 3-4 wk, we prefer to store them at room temperature For longer storage we keep the slides m boxes at -70°C The RNase step can be omitted for most satellite DNA oligomer hybridizations rf the cell/metaphase preparations are relatively free of background cytoplasm. Some synthetic DNA probes constructed as all or part of a consensus sequence are best when hybridized at a lower stringency (10% formamide mrx; see also Note 18). A 10% formamide mix would contain 3 PL of formamide, 3 yL of 20X SSC, 19 uL of water, 3 yL of E toll DNA, and 2 PL of probe DNA Most of the ohgomer probes are single-stranded probes that should not require this denaturation step. We always use it, however, because rt will also remove any structures that may be formed wlthm the single strands themselves, e g , foldbacks A room temperature slide ~111lower the temperature of the solution m the Coplin jar l-2’C, so the temperature must be adjusted accordmgly if the slides are not prewarmed. Steps 7-11 should be coordinated so that neither the denatured slides nor the denatured hybridrzation solutions sit around for long periods of time This can be accomplished by preparing the 70% formamide solution and bringing it to temperature while preparing the hybridization mix. When the formamide solution is ready, denature the slides The hybridization mix can then be denatured and chilled while the slides are going through the ethanol series Sealing the coverslip does not have to be tidy, just effective We prefer to use a syringe or disposable plastic transfer pipet to control the flow Overnight mcubations are the most convenient and are acceptable for most probes Many repetitive probes, however, will hybridize m just a few hours The concentration of formamide used for the wash should be the same as used for hybridization Most hybridization procedures require these wash steps for reduction of nontarget site hybridization, but the formamide washes can be deleted when using oligomer probes. The benefit of these washes is often mmlmal and does not justify the expense Alternatively, one can reuse the formamide wash solutions for several runs by storing them at 4’C between runs. All other wash solutions should be fresh for each run.
70
Meyne
and Moyzis
Fig. 1. Human lymphocyte metaphase chromosomes hybridized with a synthetic oligomer probe for the telomeric repeat.
17. Telomeric sequences. Any of several types of telomere probe can be used, including synthetic oligomers, plasmid clones, and PCR-labeled probes. We prefer using synthetic oligomers for in situ hybridization (Fig. 1). The standard method in our laboratory is to synthesize both strands as 42-nucleotide oligomers having the sequence (GGGTTA)7 and (TAACCC)T, respectively. Each oligomer is labeled separately using terminal deoxynucleotidyl transferase tailing of either biotin11-dCTP or digoxigenin- 11 -dUTP (I). The strands are stored separately and are not mixed together until added to hybridization mix that has been precooled to 4°C. This prevents the two strands from forming large concatenates in solution. It is also important to rapidly cool the probe immediately after denaturation. The telomere repeat is only 6 nucleotides long, so the renaturation kinetics favor rapid hybridization. If the hybridization mix is not handled carefully, the two strands can hybridize in solution before they reach the denatured chromosomal DNA on the microscope slide. Because most, if not all, vertebrate species have the same telomere sequence, it is best to use E. coli DNA as the carrier DNA in the hybridization mix. After the slides have been denatured, dehydrated, and air dried, they may be treated with proteinase-K to improve penetration of the telomere probe. This is not necessary for most slides, but for some slides (especially human tissue culture preparations) results may be improved by this treatment. Most human chromosome preparations hybridized with synthetic oligomer telomere probes demonstrate definite improvement in fluorescence signal after use of mild proteinase-K digestion. Of the other lOO-plus vertebrate species we used for hybridization of the telomere probe, only 2-3 have required proteinase-K treatment. We use 0.6
Synthetic Oligomers as Probes
18.
19.
20.
21.
22
71
pg/mL of proteinase-K in 20 mM Tns-HCl, 2 mM calcium chloride, pH 7.5, for l-10 min at 40-42”C. The slides are then rinsed once in the Tris buffer, dehydrated with an ethanol series, and air dried before the hybridization solution is placed on the slides. Lymphocyte preparations usually are best after l-2 mm and fibroblast preparations usually require 3-5 mm. Tissue samples or squash preparations may require 10 mm or more of treatment. The proteinase-K step can be run at 37-5O”C, but for convenience we use the same 42°C water bath as for the hybridization washes. The times and/or concentration of proteinase-K will have to be varied if the temperature is changed. If the chromosomes look “washedout” or ragged after a hybridization procedure including protemase-K, the treatment was too harsh. Reduce either the time or the enzyme concentration Conserved centromeric sequences. An ohgomer synthesized with the sequence of a highly conserved segment of the consensus sequence for a repetitive DNA family can be an effective probe for mapping the chromosomal distribution of the repeat family (23). The conserved regions are usually clearly identified in published descripttons of consensus sequences. This type of probe takes advantage of the concept of a consensus sequence, which is an average of many known sequences of a repetitive DNA family. In this case the hybridization mixture would be modified to allow hybridization of repeats with lower homology, so all or most of the variants of the repeat family can serve as templates for hybridization The easiest modtficatton is to reduce the hybridization stringency by using a lower concentration of formamide (see Note 10). The first alpha satelhte probe shown in Section 2, item 2 and the simple satellite sequences shown m Section 2, item 3 are probes of this type. Diverged centromeric sequences. An oligomer synthesized with the sequence of a very divergent sequence, as compared with the consensus sequence for the repetitive DNA family, is used for hybridization to specific centromeric regions (18) No special computer programs are needed. Simply line up the sequence from a chromosome-specific recombinant DNA insert and the consensus sequence for the repeat family. Direct comparison will identify the regions of divergence from the average. Not all divergent regions will demonstrate chromosome-specificity. The chromosome specific alphoid probes shown in Section 2, item 2 are examples of this type of probe (Fig. 2). The procedure is not limited to alphoid probes Based on existing data, however, there are more chromosome-specific sequences m the alphotd family than for other repetitive DNA famihes. There are many published options for the detection procedure Most of these variations yield similar results, so use the variation most suited to your laboratory. The BTS method is given here as an example because it was one of the first methods used for detection of biotmylated probes. The amount of counterstain used depends on each batch of stain and how well it stores, as well as the brightness of the hybridization signal. The average amounts for a brightly fluorescent probe signal are 0.5 pg/mL of PI and 0 06 pg/mL for DAPI. Almost any type of fluorescence microscope will be adequate for viewing the signal generated by fluorescence detection/amplification methods, but the qual-
Meyne and Moyzis
72
Fig. 2. Human lymphocyte metaphase chromosomes hybridized with a synthetic oligomer of an alpha satellite DNA sequence specific for chromosome 18.
ity of photographs will directly reflect the quality of the microscope and camera. An epifluorescence microscope system is preferred by most investigators. The microscope should be equipped with a blue filter for viewing the FITC signal. Most blue filter sets will also allow detection of the PI counterstain. It is also helpful to have an ultraviolet filter set for screening slides. The DAPI stain is useful for finding metaphases under low power before switching to the blue filter to view the hybridization sites (yellow-green FITC fluorescence) on the chromosomes counterstained red by the PI. Standard films with an IS0 of about 400 are suitable for photography of fluorescence signals generated by the method described above. If the concentration of a counterstain is too high or too low, the coverslips can be removed, and the slides washed in fresh BTS buffer and remounted with a new stain concentration. Mounted slides can be kept at 4°C for at least 2 wk without loss of fluorescence intensity.
References 1. Moyzis, R. K., Buckingham, J. M., Cram, L. S., Dani, M., Deaven, L. L., Jones, M. D., Meyne, J., Ratliff, R. L., and Wu, J. R. (1988) A highly conserved repetitive DNA sequence (ITAGGG),, present at the telomeres of human chromosomes. Proc. N&l. Acud. Sci. USA 85,6622-6626.
2. Moyzis, R. K. (1991)The humantelomere.Sci. Am. 265,48-X 3. Wurster-Hill, D. H., Ward, 0. G., Davis, B. H., Moyzis, R. K., and Meyne, J. (1988) Fragile sites,telomericDNA sequences, B chromosomes and DNA content in raccoon dogs,Nyctereutesprocyonoides,with comparativenoteson foxes, coyote, wolf and raccoon. Cytogenet. Cell Genet. 49,278-28 1. 4. Cornforth, M. N., Meyne, J., Littlefield, L. G., Bailey, S. M., andMoyzis, R. K. (1989) Telomerestainingof humanchromosomes andthe mechanisms of radiation-induceddicentric formation.Rud. Res. 120,205-212.
Synthetic Oligomers as Probes
73
5 Meyne, .I., Baker, R J., Hobart, H. H., Hsu, T C., Ryder, 0 A , Ward, 0. G , Wiley, J. E , Wurster-Hill, D. H , Yates T. L , and Moyz~s, R K (1990) Distribution of non-telomerm sites of the (TTAGGG), telomere sequence m vertebrate chromosomes. Chromosoma 99, 3-10 6 Lin, C C., Meyne, I., Sast, R , and Moyz~s, R K. (1990) Apparent lack of telomere sequences on doubleminutechromosomesCancer Genet Cytogenet 48,27 l-274. 7 Lin, C. C , Meyne, J , Sasi,R , Bowen,T., Unger,T , Tamaka,T , Hadro,T. A , andHoo, J J. (1990) Determmmgthe originsand structuralaberrationof smallmarkerchromosomesm two casesof 45, X/46, X, +M by use of sex chromosomespecific DNA sequences.Am J. Med Genet 37,71-78 8 Meyne, J , Ratliff, R L , Buckingham,J M , Jones,M D , Wilson, J S , andMoyzrs, R K. (1990)The humantelomere,m Chromosomes Today, vol 10 (Fredga,K , Klhlman,B. A., andBennet,M. D , eds.),Unwin Hyman, London,pp 75-80. 9 Scherthan,H. (1990) Localization of the repetitive telomericsequence(‘ITAGGG), m two muntJacspecresand rmphcatronsfor then karyotyprc evolution Cytogenet Cell Genet 53, 115-l 17. 10 Praznovszky,T , Kereso,J., Tubak, V , Cserpan,I , Fatyol, K., andHadlaczky, G (1991) De novo chromosomeformation in rodent cells Proc. Nut1 Acad SCL USA 88, 11,042-l 1,046. 11 Bilha, F andDe Born,U (1991)Localizationof centromericsatelliteandtelomericDNA sequencesm dorsalroot ganglion neurons,in vitro. J Cell Scr 100, 219-226. 12 Miller, B. M., Werner, T , Weler, H -Il., and Nusse,M (1992) Analysis of radtatroninducedmrcronucletby fluorescencem situ hybrrdrzatron(FISH) srmultaneouslyusing telomerrcandcentromericDNA probesRad Res 131, 177-185 13 IJdo,J W., Wells, R A , Baldmi,A , andReeders,S T (1991)Improvedtelomeredetection usinga telomererepeatprobe(‘ITAGGG), generatedby PCR NucletcAcids Res 19,478O.
14 Wiley, J E, Meyne, J., Little, M L , andStout,J C (1992)lntersttttal hybridization sites of the (TI’AGGG), telomermsequenceon the chromosomes of someNorth American Hyhd frogs. Cytogenet. Cell Genet 61,55-57. 15 Ray, F A , Meyne, J., andKraemer,P. M (1992)SV40T-antigenInducedchromosomal changesreflect a processthat is both clastogenicand aneuplotdogemc and is ongoing throughoutneoplasticprogressionof humanftbroblasts.Mutut. Res. 284,265-273 16 Park, V M , Gustashaw,K M , and Wathen,T M (1992)The presenceof interstitial telomericsequences m constitutionalchromosome abnormalities. Am. J. Hum Genet. 50, 914-923. 17. Schubert,I., Schriever-Schwemmer, G , Werner, T., and Adler, I -D. (1992) Telomertc signalsin Robertsonianfusion and fissionchromosomesimplicationsfor the origin of pseudoaneuploidyCytogenet Cell Genet 59,6-9 18. Meyne, J. andMoyzis, R K. (1989)Humanchromosome-specific repetitive DNA probes targetingm situ hybridization to chromosome17with a 42 basepan alphoidDNA ohgomer. Genomlcs 4,472-478 19. Lm, C. C., Meyne,J , Sass,R , Bowen,P., Unger,T., Tainaka,T , Hadro,T., andHoo, J. J (1990)Determmmgtheongmsandstructuralaberrationof smallmarkerchromosomes m two casesof 45, X/46, X, +M by useof sexchromosome specificDNA sequences. Am J Med Genet. 37,71-78
20. Zmkowski,R. P., Meyne, J , andBrinkley, B R (1991)Thecentromere-kmetochore complex: a repeatsubunitmodel J Cell 3101. 113, 1091-l 110 21 Grady, D L., Ratliff, R L , Robinson,D L , McCanhes,E C , Meyne, J , andMoyz~s,R K , (1992)Highly conservedrepetitiveDNA sequences arepresentat humancentromeres Proc Natl. Acad See. USA 89,1695-1699
Meyne
and Moyzis
22 Moyz~s, R K., Torney, D , Meyne, J , Buckmgham, J. M , Wu, J R , Burks, C , Srrotkm, K. M , and Goad, W B (1989) The dtstrtbution of mterspersed repetrtrve DNA sequences m the human genome. Genomics 4,273-289. 23 Meyne, J , Littlefreld, L G , and Moyzis, R. K. (1989) Labehng of human centromeres usmg an alphoid DNA concensus sequence apphcatron to the scoring of chromosome aberrations. Mutat. Res. 226,75-79. 24 Matera, A. G and Ward, D C (1992) Ohgonucleottde probes for the analysis of spectftc repettttve DNA sequences by fluorescence rn situ hybridrzatron. Hum. Molec. Genet 1, 535-539
25. Koch, J E , Kolvraa, S , Petersen,K B , Gregersen,N , and Bolund, L. (1989) Ohgonucleotrde-primingmethodsfor thechromosome-specific labelhngof alphasatelliteDNA m situ. Chromosoma 98,259-265 26 Gosden,J., Hanratty, D., Starling, J., Fantes,J., Mitchell, A., and Porteous,D. (1991) Ohgonucleotide-pnmed msituDNA synthesis (PRINS) a methodfor chromosome mappmg, bandmg,andmvestrgatronof sequence orgamzatron.Cytogenet.Cell Genet 57, 100-104 27 Goodwin,E. H. andMeyne,J. (1993)Strand-specrftc FISH revealsorientationof chromosome18 alphordDNA Cytogenet.Cell Genet, m press 28 Prosser,J., Frommer,M , Paul, C., andVmcent, P. C (1986) Sequencerelatronshtpsof the three humansatelliteDNAs J Mol &ol 187, 145-155
CHAPTER 7
Mapping Human YAC Clones by Fluorescence In Situ Hybridization Using Ah-PCR from Single Yeast Colonies Antonio
Baldini
and Elizabeth
A. Lindsay
1. Introduction The yeast artificial chromosome (YAC) clomng system 1scapable of cloning large segments of DNA (50-2000 kb) from complex genomes (I). YAC genomic libraries have been constructed using DNA from human as well as other species and have been proven to be powerful tools for the analysis of the human genome. Chromosomal assignment of YAC clones can be assessedby different methods, for example, hybridization to somatic cell hybrid panels (2), polymerase chain reaction (2,3), and nonisotopic in situ hybridization (4-6). In situ hybndization can be performed using yeast genomic DNA containing the artiflclal chromosome. Owing to the relatively low content of human DNA, such a method usually leads to low hybridization efficiency. In practical terms, the number of metaphase spreads bearing a hybridization signal on both chromatids of both homologs may be as low as 5-10% (see ref. 7, and our unpublished results). This requires time-consummg analysis of a large number of mitoses. A much higher hybridization efficiency can be obtained by labeling gel-punfied YAC DNA (8). This procedure, however, is not smtable for mapping a large number of clones because it 1s lengthy, more expensive, and the DNA yield is low. To circumvent the problems inherent m these two methods, several research groups have proposed the use of Alu-PCR products from YACs as probes for fluorescence in situ hybridization (FISH) (4-6). Alu-PCR has been shown to amplify selectively human sequences from complex DNA sources, including yeast DNA contaming YAC clones (2,9). In this chapter we describe in detail a procedure for mappmg YACs by FISH using PCR products from a single yeast colony or agarose blocks. The method allows the chromosomal assignment of clones at a very early stage of their characterization. From Edlted
Methods m Molecular Bology, Vol 33 In Situ Hybrrdrrebon frofoco/s by K Ii A Choo CopyrIght Q 1994 Humana Press Inc , Totowa, NJ
75
Baldini
76
and Lindsay
2. Materials 2.1. Alu-PCR 1. Yeast colonies (contaming the YAC) on agar plate, or agarose block with yeast cells (prepared using standard methods). 2 Sterile toothpicks. 3 Lysis buffer: 1% Triton X-100, 20 mM Tris-HCl, pH 8.5,2mM EDTA 4. 10X dNTP mix: 2 mM each of dATP, dCTP, dGTP, and dTTP 5. 10X PCR buffer 15 mMMgC12, 100 mMTris-HCl, pH 8.3,500 mMKC1, 0 01% gelatm. 6. Thermus aquattcus (Tuq) DNA polymerase (AmphTaq, from Perkm-Elmer/ Cetus, Norwalk, CT). 7 Oligonucleotide primer AGK34 (sequence: S’GAGCCGAGATCG (C/T)GCCACTGCACTCCAGCCTGGG3’) deprotected, dried, and resuspended m water at a concentration of 50 ~IV 8 Light mineral oil. 9 Agarose. 10 Ethidmm bromide
2.2. Nonisotopic 1, 2 3 4. 5 6. 7. 8. 9
PCR products 10X NT buffer 0.5M Tris-HCl, pH 8, 50 mM MgCl,, 0.5 mg/mL BSA 10X Biotm mix* 0 5 mM each of dATP, dGTP, dCTP, and Blotin-l l-dUTP O.lM P-mercaptoethanol. 1 mg/mL stock DNase I. 10 U/pL DNA polymerase I from E cofi. TE* 50 mil4 Tns-HCl, pH 7 6,1 mM EDTA. Sephadex G-50. Hydrate and store m TE containing 0 1% SDS. Glass wool.
2.3. In Situ 1 2 3. 4. 5. 6 7 8
Hybridization
Chromosome preparation on microscope slides 50% w/v solutron of dextran sulfate in water, autoclaved Formamide. Deionized formamrde. 1 pg/pL sonicated salmon sperm DNA. 1 pg/pL human Cot-l DNA 3M Sodium acetate 20X SSC 3M NaCl, 0 3M sodium citrate, pH 7 0.
2.4. Posthybridization 1. 2. 3 4. 5. 6.
Labeling
Washing
and
Detection
Wash solution 1. 50% formamide, 2X SSC, heated at 42°C. Wash solution 2: 0.5 X SSC, heated at 6O’C. Wash solution 3. 4X SSC, 0 1% Tween-20, heated at 42’C Block buffer. 4X SSC, 3% BSA, 0 1% Tween-20. Detection buffer 4X SSC, 1% BSA, 0 1% Tween-20 DAPI solution’ 200 ng/mL in 2X SSC.
77
Single Colony PCR for YAC Mapping
---. 1
lysts buffer
Bolled
for
Pellet
cellular
-Single
yeast
colomes
1% Tnton Xl 00 20mM Tr1.s pH 8 5 2mM EDTA
10 mm
debris
by
centrlfugatlon
1 Supernatant
used
as template
1 PCR
reaction
using
a single
Alu-primer
1 Non-isotopic labellmg Nick translation
by
1 FISH
Fig. 1 Schematic representation of the procedure to obtain Alu-PCR probes suitable for FISH from single yeast colonies contaming human YAC clones. 7 Antifade mounting buffer: 200 mM DABCO, 90% (v/v) glycerol, 20 mM TrisHCl, pH 8 8 FITC-avldin and brotrnylated antiavidin antibody (Vector Laboratones, Burlmgame, CA).
3. Methods 3.1. Generation of PCR Products from a Single Yeast Colony (see Fig. 1) 1. Pick a colony from agar plate (under sterrle condlttons to avoid contammatlon of the plate). 2. Mix well in 20 pL of lysrs buffer. 3 Place in heat block set at 100°C (or in boiling water) for 10 min. 4 Spin in a microfuge for 10 min. 5. Without disturbing the pellet (cell debris), transfer the supernatant to a fresh tube The supernatant can be used immediately for the PCR reaction or stored at -2O’C.
Baldini
78
and Lindsay
6 In a OS-mL tube (suitable for a thermocycling
7
8
9 10. 11 12 13 14
machme) mrx m this order (total 50 pL). a. 33.2 l.tL H20; b 5 l.tL 10X PCR buffer, c 5 PL 10X PCR dNTPs mix; d 0 8 l.tL Tuq polymerase (SU&L); e. 1 l.tL Primer AGK (5Oj.tM stock); and f. 5 PL supernatant Overlay with a drop of light mineral 011. Run the followmg thermocycling: a 1 min at 94”C, b. 45 s at 55’C; c. 5 min at 68’C, and d Repeat 30 times. Run a ~-FL ahquot on a 1% agarose gel to check the products of amplification An example of such gel is shown in Fig 2 Note the large amount of RNA from the yeast cells (bottom of the gel). Precrpitate remainder of reactron m 10% 3M sodmm acetate and 3 vol of absolute ethanol mix, and incubate on dry ice for 15 mm or at -20°C overnight. Spin for 15 mm in a microfuge at 4°C. Discard the supernatant Add 500 l,tL of 70% ethanol (at -2O’C) Repeat steps 10 and 11 Dry and resuspend pellet in 10 pL distilled water Use half of this vol for each labelmg reaction
3.2. Generation
of Ah-PCR
Products
from
Agarose
Blocks
1 Wash agarose blocks containing YAC DNA separately three times m 10 mL TE, pH 8.0, at 5O’C for 10 mm. 2 Cut one-tenth of a block (equivalent to about 10 FL) with a blade or glass coverslip into a 1.5-mL tube Use a separate blade or coverslip for each block to prevent contamination of samples. 3 Add 90 pL of distilled water and melt the agarose block at 65°C for 5 min 4 Mix solution thoroughly. 5 Follow the PCR protocol described m Section 3 1. from step 6 onward, replacing the supernatant with 1 FL of the melted block and adJustmg the vol of drstilled water in the reaction mix (See Note 1 for problems associated wrth the A/u-PCR procedure )
3.3. Nonisotopic Labeling of Ah-PCR Products For a 50-pL reactlon, use the reagents listed in Section 2.2. as follows: 1 Mix on ice: a. 25 p.L distilled water; b 5 pL 10X NT buffer, c 5 pL 0.1 M P-mercaptoethanol, d 5 pL 0.5mM 10X biotm mix, and e 1 pL DNA polymerase I (total ~0141 pL) Multiply this vol according to the number of samples to be labeled.
Single Colony PCR for YAC Mapping
2.01.4l.lO.Q-
Fig. 2. Ethidium bromide-stained agarose gel showing Alu-PCR products from 10 yeast colonies containing different YACs. 5 pL (out of a 50-pL PCR reaction) were applied per lane. The first lane on the left contains 300 ng of the Lambda/Hi&III plus PhiX174IHueIII molecular weight marker (in kb). The intense smear at the bottom of the gel is the RNA contained in the yeast cells.
2. Add 41 pL of this mix to 1 pg DNA (in 5 l&L). 3. Immediately before use dilute 1 pL of stock DNase I (1 mg/mL) in 1 mL ice cold distilled water, mix thoroughly, and add 4 pL to the reaction mix. 4. Incubate reaction mix in a 15°C water bath for 2 h. (Prepare spin columns during this time; see step 7.) 5. Terminate the labeling reaction by incubating the reaction mix in a 65’C water bath for 5 min. 6. Add 4 pL of 0.5M EDTA, 1 pL of 10% SDS, and make vol up to 100 p,L with distilled water. 7. To prepare spin columns for the removal of unincorporated nucleotides, pack a small amount of glass wool into a I-mL syringe and fill with G50 Sephadex equilibrated in TE (pH 7.6). Spin at 900 rpm for 4 min, then rinse columns twice with 100 p.L TE (pH 7.6)/0.1% SDS. 8. After rinsing, apply labeled probe to the column and spin at 900 rpm for 4 min, collecting the reaction in a 1.5-mL tube. 9. Run a 1O+L aliquot of labeled probe on a 1% agarose gel with a PhiX 174IHaeIII marker. Probe size should be ~500 bp (optimum 200-300bp) (see Note 2).
Baldini
80
and Lindsay
3.4. In Situ Hybridization 3.4.1. Probe Denaturation 1 Preciprtate 20 FL of labeled DNA with 2 ltL human Cot-l DNA, 3 PL salmon sperm DNA, 2.5 lrL 3M sodium acetate, and 3 vol absolute ethanol. Leave on dry ice for 15 min or at -20°C overnight 2. Spin for 15 mm at 4T and allow pellet to dry. 3. Prepare hybridization mix (for 100 l.tL: mix 50 p,L of deionized formamide, 20 yL of dextran sulfate, 20 ltL of distilled water, and 10 ltL of 20X SSC). 4 Resuspend pellet in 10 l.t.L or 20 ltL of hybridization mix (for 22 x 22 mm or 24 x 50 mm coverslip). 5. Denature DNA mix at 80°C for 5 min, spin briefly to collect vapors. 6. Reanneal at 37°C for at least 15 mm. Leave at 37°C or place on ice until ready for use.
3.42.
Chromosome
Denaturation
1. Prewarm slides on a metal tray m a dry oven at 60°C 2 Prepare denaturing mix of 70% deionized formamide in 2X SSC (200 ltL per slide) 3 Pipet 200 l.tL of mix onto each slide and cover with 24 x 50 mm coverslip 4. Immediately put mto a dry oven at 80°C for 2 mm
Perform
steps 3 and 4 quickly,
as the denaturation
time is critical.
5. Dehydrate slides in 70,90, and 100% ethanol (5 mm each). Use 70% ethanol at -20°C (Standard grade mrcroscope slides will not break under these conditions.) 6. Air-dry
3.4.3. Hybridization 1 Warm slides to 37°C. 2. Pipet 10 or 20 p.L (see Section 3 4 1 , step 4) of denatured probe mix onto slide 3. Lower coverslip on top (try to avoid au bubbles as much as possrble) and when mix is evenly spread, seal edges of coverslip with rubber cement. 4. Incubate slides m a moist chamber at 37T overnight
3.4.4. Posthybridization Washes and Detection Do not allow slides to dry at any point during washing routine. 1. Remove coverslips 2. Wash three times for 5 mm each in wash solution 1 in a Coplin Jar m a shaking water bath 3. Wash three times for 5 min each in wash solution 2 4. Block using 200 ltL of blockmg buffer per slide. Apply large coverslip and mcubate in moist chamber at 37°C for 30 min 5. Detect with FITC-avldin by diluting stock solution 1:300 m detection buffer Use 200 ltL per slide Apply large coverslips and incubate m a motst chamber at 37T for 30 mm.
6. Wash three times for 5 mm each m wash solution 3 (keep 50 mL of this solution for final wash).
Single
Colony
PCR for YAC Mappmg
81
7. Amplification (optronal). Dilute a biotin-conjugated antiavidm antibody to a concentration of 2-4 I.tg/mL in detection buffer. Use 200 pL/slide Apply large coverslips and incubate in a moist chamber at 37°C for 30 mm. Wash as m step 6. Repeat step 5. Wash again as in step 6 and then go to step 8. 8. Counterstain with DAPI (200 ng/mL m 2X SSC) for 5 mm at room temperature. 9. Wash in 2X SSC, 0.05% Tween-20 for 2 mm at room temperature. 10 Mount slides using 24 x 50 mm coverslips and 30 yL of antrfade 11. Vrew under microscope (see Note 3). 12. Store slides at 4OC!in darkness. See Note 4 for troubleshooting.
4. Notes Problems arising from the in situ procedure may occur at various steps; thus it is important to check all the steps described in the protocol. In our laboratory, we have used this procedure to map several hundred YACs (see Fig. 3 for several examples; see also Note 5), and the successrate has been close to 100% using digital imaging systems. Some of the most common problems and ways to deal with them are detailed below. 1. Alu-PCR. Alu-poor YACs may fat1 to amplify or produce only a few amplified fragments. Alternative primers are available that have been used by other groups for FISH mapping of YACs (4,5). If no Alu-PCR products can be obtained, genomic yeast DNA can be labeled by nick translation (8) or, alternatively, YAC DNA can be purified by pulsed field gel elecrophoresis (PFGE) and the purified DNA labeled by nick translation (IO). It is our experience that FISH with AluPCR amplified YACs gives stronger signal than with nick translation of genomic yeast DNA. 2 DNA labeling. The nick-translation procedure should yield DNA fragments of 200-300 bp. High-molecular-weight fragments that remain after the labeling step may produce background that is not eliminated by suppression, and which may interfere with interpretation of FISH results. If high-molecular-weight fragments are found, it may be necessary to increase the amount of DNase I used and/or to increase the length of the DNase I incubation step 3 Fluorescence microscopy. We use a standard fluorescence microscope equipped with a 100 W mercury lamp and plan-neofluar objectives 63 and 100x A wide variety of filters is now available in the market (e g., from Chroma Technology, Brattleboro, VT) that can be mounted on virtually any brand-name microscope and are suitable for a number of different fluores and combinations of them. If using a regular photographic camera, dual or triple band-pass filters may be the best choice. However, these filters reduce the amount of light that reaches the
cameraand some low-intensity signalsmay not be detectable.High-speed color slide films are used successfully for FISH (e.g., Kodak HC400). The best results are obtained using digital imaging systems. We use a grayscale cool-CCD camera from Photometrics (Tucson, AZ) with sensor Kodak KAF 1400. The system offers the best sensitivity and very good resolutron; the dtsadvantages are its cost and the need to collect color-specific images (1 e , one image
Baldini
and Lindsay
Fig. 3. Partial metaphase spreads from FISH experiments using as probes (A-D) the PCh products shown in Fig. 2 (first four lanes from the left) after biotinylation, as described in Section 3.3. In B, hybridization is detected on two different chromosome pairs, indicating that the clone contains noncontiguous DNA segments.Chromosomes are counterstained with DAPI. Probe signals are indicated by a bar. Images wereobtained using a cool-CCD camera (seeNote 3); gray-scale images were pseudocolored and merged. for 4’,6-diamidin-2-phenylindol-dihydrochlorid (DAPI) and one image for fluoroscein isothiocyanate (FITC); these images are then pseudocolored and merged. It is important in these systems to obtain images in registration in order to position exactly the probe signal on the chromosome image. We use a triple bandpass emission/beam splitter filter set with separate exciters (specific for DAPI, FITC, and rhodamine), which are moved by a filter wheel located near the arc lamp. In this way there is no movement of filters between the sample and the camera, and images collected in sequence for DAPI, FITC, or rhodamine can be considered in perfect registration for this application. 4. In situ hybridization. The two main problems associated with this step are poor signal and high background. When no signal is seen, the first step is to increase the amount of DNA used in the hybridization reaction. If there is a visible but weak signal, this may be increased by an amplification step prior to counterstaining (see Section 3.4.4.).
Single Colony PCR for YAC Mapping Background usually comes in one of two forms. The first is background caused by inadequate Ah suppression. This IS easily recognized as it results in a characteristic banding pattern of the chromosomes. It can be eliminated by increasing the amount of Cot-l in the hybridization reaction but, as Cot-l may also reduce the probe slgnal intensity, oversuppression should be avoided. A more generalized background, which does not have this characteristic appearance, 1s likely to be caused by the presence of high-molecular-weight DNA fragments or inadequate probe purification. The best way to deal with this is by careful probe preparation and labeling prior to tn situ hybridization If background signal continues to be a problem, it may be necessary to increase the stringency of the hybridization step (by increasing the proportion of formamide in the probe denaturing step) or of the posthybrldlzation washes. 5 Chimerism detection. It has been suggested that FISH be used for chlmerism detection. At this point, the ability and efficiency of FISH to detect chimeras is not certain. Using the procedure described, we found that 30% of the YACs examined were chimeric (an example is shown m Fig. 3) However, this may be an underestimation of the true figure because, if the chimerlc portion of a clone is small, the resultant signal may fall below the limit of detection. Also, Alu-PCR selectively amplifies DNA sequences and may fall to amplify a chimeric sequence within a YAC. We think that because of its speed, FISH is a convenient way to detect chimeras, but its efficiency is likely to be low if the noncontiguous DNA segment is small.
Acknowledgments This work was supported m part by the Baylor Human Genome Center grant HG00210 and by the Keck Center for Computational Biology.
References 1. Burke, D T., Carle, G. F , and Olson, M V. (1987) Clonmg of large DNA segments of exgenous DNA into yeast by means of artificial chromosome vectors Scrence236,806812 2 Nelson, D L , Ballablo, A, Victoria, M. F , Pierettl, M., Bles, R. D , Gibbs, R A , Maley, J. A., Chinault, A. C , Webster, T. D , and Caskey, C. T (1991) Alu-primed polymerase
3 4 5 6
cham reaction for regional assignment of 110 yeast artificial chromosome clones from the human X chromosome ldentiflcation of clones associated with a disease locus, Proc Natl. Acad. Scl USA 88,6157-6161 Green, E D and Olson,M V (1990) Systematicscreeningof yeast artificial-chromosomehbrariesby useof the polymerasechain reaction.Proc. Nat1 Acad. Scr USA 87, 1213-1217 Lengauer,C , Green,E D , andCremer,T (1992) Fluorescence II?sttu hybridization of YAC clonesafter Alu-PCR amphficatlon.Genomlcs13, 826-828 Breen,M , Arveiler, B , Murray, I., Gosden,J R , andPorteus,D J (1992)YAC mappmg by FISH usingAlu-PCR-generatedprobes.Genomlcs13,726-730 Baldml, A., Ross,M , Nizetlc, D , Vatcheva, R , Lindsay, E A , Lehrach, H , and
Siniscalco, M. (1992) Chromosomal assignment of human YAC clones by fluorescence in sllu hybrrdization: useof smgle-yeast-colony PCR and multiple labeling Genomtcs 14, 181-184
Baldini
and Lindsay
7. Wada, M., Little, R D., Abtdt, F , Porta, G , Labella, T , Cooper, T., Della Valle, G , D’Urso, M , and Schlessmger, D. (1990) Human Xq24-Xq28 approaches to mappmg wtth yeast artrftctal chromosomes Am. J Hum. Genet. 46,95-106 8. Montanaro, V , Casamassimr, A, D’Urso, M., Yoon, J -Y , FretJe, D , Schlessmger, D , Muenke, M., Nussbaum, R. L., Saccone, S., Maugert, S , Santoro, A M., Motta, S , and Della Valle, G (1991) In situ hybridrzatron to cytogenetic bands of artiftcral chromosomes covering 50% of human Xq24-Xq28 DNA. Am. J. Hum. Genet. 48, 183-194. 9, Nelson, D. L , Ledbetter, S. A , Corbo, L , Vtctoria, M F , Ramirez-Sohs, R , Webster, T D., Ledbetter, D H , and Caskey, C. T (1989) Alu polymerase cham reactton a method for rapid isolatton of human-spectfic sequences from complex DNA sources Proc Natf Acad Scr USA 86,6686-6690 10. Sellen, C , Eubanks, J H., Gtovannnu, M., Hermanson, G. G , Romo, A , DJabah, M , Maurer, S , McElligott, Smith M W., and Evans, G. A (1992) Detection and characterization of chimerrc Yeast Arttftctal Chromosome clones by fluorescent in srtu suppressron hybrrdtzation Genomtcs 14,536-541
CHAPTER 8
FISH of Ah-PCR-Amplified and Applications in Tumor Christoph
YAC Clones Cytogenetics
Lengauer, Michael R. Speicher, and Thomas Cremer
1. Introduction Yeast artificial chromosomes (YACs) (I) containing human inserts of up to 1 megabase (Mb) length have been mapped by fluorescence in situ hybridrzation (FISH) (for review see ref. 2). If total yeast clone DNA is used as a probe, an excess of yeast DNA (approx 98%) is labeled m addition to the human sequences (approx 2%). This excess labeling not only leads to wastage of expensive labeling reagents, but contributes to background in in situ hybridization experiments. The hybridization efficiency 1soften less than satisfactory in metaphase spreads, whereas signals in Interphase nuclei generally cannot be evaluated. Cutting out the YAC band from a pulsed-field gel and purification of the DNA is time-consummg and yields only rather limited amounts of a probe. To overcome these problems an Alu-PCR approach (3) has been optimized for the selective generation of human DNA sequences from YAC-containing yeast strains with complexities sufficient for FISH experiments (4). Two ohgonucleotide primers, termed CL1 and CL2, have been established, which bind to the highly conserved 5’ and the 3’ ends of the approx 300-bp long, mterspersed Alu repeat DNA block ($5). Provided that the distance between two adjacent Alu blocks does not exceed a few kilobases (kb), this primer pair allows the amplification of DNA sequences located between any two ALUblocks independent of their orientation. Using this approach, we have tested more than 150 YAC clones containing some 100 kb up to 1 Mb of human inserts from various regions of the human genome, including both R- and G-bands. The large majority of these clones yielded specific, fluorescent signals both m metaphase spreads and interphase nuclei. Signal intensities are generally comparable with those observed using chromosome-specific repetitive DNA probes and can easily be detected using standard fluorescence microscopy. This approach factlitates the rapid mapping of YAC clones and is ideally suited for chromosome analysis at all stages of the cell cycle, e.g., in tumor cytogenetics (6) (see Notes 1 and 2). From Edlted
Methods m Molecular Btology, Vol 33 In SW Hybrrdrzatron Protocols by K H A Choo Copyrlght Q 1994 Humana Press Inc , Totowa, NJ
85
86
Lengauer, Speicher, and Cremer 2. Materials
1 For Alu-PCR, YAC DNA may be prepared by three different methods: a. Purified high-molecular-weight genomic yeast clone DNA (100 ng) This DNA is prepared as described by Green and Olson (7). b Agarose plugs containing yeast cell DNA with the YAC of interest. For the growth of yeast strains and the preparation of chromosome-sized DNA m agarose for pulsed-field gel electrophoresis, the protocols published by Brownstein et al. and Burke et al. are used (1,8) Low-melting-point agarose (ultrapure) purchased from Gibco-BRL/Life Technologies (Gaithersburg, MD) is recommended for plug preparation Note that agarose plugs are stored routinely in EDTA (OSM) at 4°C. However, since the presence of EDTA inhibits Taq polymerase and affects the Mg2+ concentrations, which are critical for primer specificity, EDTA should be carefully avoided in PCR assays. Plugs are therefore washed two times for 30 min each in 1M Tris-HCl, pH 8 0, and equilibrated in PCR-buffer (10 nuI4 Tris-HCl, pH 8.4, 50 mM KCl, 1.5 mM MgC12, 0 001% gelatin) for 30 mm at room temperature. Plugs are further equilibrated overnight m fresh PCR-buffer at 4’C After melting of the plug for 5 min at 75’C, approx 150 ng of genomrc yeast cell DNA is added to the Alu-PCR assay. Melted plug material can be stored at 4°C and reused for several months. c. For rapid testing, a very small amount of yeast cells (barely vrsible on a sterile pipet tip or a toothpick) can be picked directly from clones grown on plates or filters. The cells are diluted in 1 5 mL of distilled water, and aliquots of up to 20 pL are added to the PCR assay without any further treatment. This approach, however, provides less reproducible amplifrcatron yields than methods a and b. 2. Disposable gloves 3. Set of microliter pipets (e g., Gilson). 4 1.5-mL Eppendorf tubes with screw caps. 5. 10X PCR-buffer: 100 mMTris-HCI, pH 8 4,500 mM KCl, 15 mM MgC12, 0.01% gelatin. The buffer 1s stable for at least 3 mo at -20°C. 6. dNTP-mix. Stock solution containing all four dNTPs at a concentration of 25 nuI4 IS prepared from nucleotides (lOO-mA4 solutions) purchased from Boehringer Mannheim (Mannheim, Germany) and stored at -20°C for several weeks. 7. Thermus aquaticus DNA polymerase (Native Taq; Perkin-Elmer/Cetus, Norwalk, CT) 8 Oligonucleotide primers CL1 (5’ TCC CAA AGT GCT GGG ATT ACA G 3’) and CL2 (5’ CTG CAC TCC AGC CTG GG 3’) primers are dissolved in a vol sufficient to yield a 25-w solution, and stored at -20°C 9. Paraffin or1 (light mineral oil) 10 Thermocycler 60 (BioMed, Theres, Germany). 11. Seakem ME agarose (FMC Bioproducts, Rockland, ME). 12. 50X TAE: 2M Trrs-acetate, pH 8.0,O 05M EDTA. 13. 1% Ethidmm bromide. 14. DNA gel electrophoresrs apparatus 15. 0 5M MgC12, 5M NaCl, and 99% ethanol for precipitation of DNA
YAC Probes
in Tumor
Cytogenetics
87
16. 20 mg/mL RNase A Boil for 10 min and store at -2O’C. 17 10% Pepsin. Store at -20°C. 18. 1% Formaldehyde solution: Mix 2.7 mL of 37% acid-free, buffered formaldehyde (Merck, Rahway, NJ) with 97.3 mL of PBS containing 50 mM MgC12 19 Phospate buffered saline (PBS): 8 g NaCl, 0 2 g KCl, 0.2 g KH2P04, 1 g Na2HP04 2Hz0, 0 15 g NaH2P04*H20. Add distilled water to 1 L and adjust pH to 7 4 with HCI. 20. 20X SSC 3M NaCl, 0.3M sodium citrate, pH 7 0 21 Ethanol series. 70, 90, and 99% 22. Cot-l DNA (BRL/Life Technologies) with a size range of 200-500 bp 23. Salmon sperm DNA This should be sheared or DNase digested to an average size of approx 500 bp (Sigma, St. LOUIS, MO). 24. Hybridization buffer: 4X SSC, 20% dextran sulfate 25. 0.2 mg/mL DAPI (4,6-dlamidmo-2-phenylmdole-dihydrochloride). 26. 1 mg/mL Propidlum iodide. 27. Antlfade buffer. Mix 10 mL of p-phenylendlamine solution (100 mg pphenylendlamine-dihydrochloride m 10 mL of PBS), pH 8 0, and 90 mL of glycerine. Store at -20°C. 3. Methods In the following protocol, we have put a greater emphases on the generation of Alu-PCR probes and refer the readers to other chapters in this volume (e.g., Chapters 4, 7, and 10) for a detaded description of the in situ hybrldlzation procedure. I.
2 3
4.
3.1. Performing the Polymerase Chain Reaction (PCR) For each PCR, prepare the following reactlon mix in a 1 5-mL Eppendorf tube: a. 10 yL of 10X PCR-buffer; b. 1 FL of dNTP-mix; c. 1 pL of Alu-primer CL1 , d. 1 pL of Alu-primer CL2, e. Double dlstllled water to a fmal vol of 100 pL, taking mto account the calculated vol for 150 ng of genomic yeast clone DNA; f. 150 ng of genomlc yeast clone DNA, and g. 5 U of Tuq DNA polymerase. Mix gently Overlay the reaction mix with 50 p,L of paraffin oil Note that for most thermocyclers an overlay of paraffin oil is essential In the case of the Thermocyler 60 (BloMed), paraffin 011can be omitted. Using the BioMed machine, perform the following cycles a. 97°C for 3 min; b. 97°C for 1 mm; c 37°C for 30 s; d 72°C for 6 min; e. Repeat steps b-d for a total of 30 cycles; and f 72“C for 4 min Store amplified DNA until further use at 4°C (up to 1 mo) or at -20°C for more extended periods.
88 1 2.
3. 4
Lengauer,
Speicher,
and Cremer
3.2. Analyzing the Reactions Prepare a lOO-mL agarose gel (1 2%) Bring the solution to a boll in a microwave oven until all agarose has dissolved Cool the solution to 55”C, add ethldium bromide (final concentration of 0.5 pg/mL), and pour onto a gel tray Remove the overlay of oil from the reaction mix. This is done by adding 50 pL of chloroform, mlxmg and centrifuging for 10 s The oil dissolves in the CHCl, (bottom layer). Remove the reaction mix (top layer) with a microliter pipet. Alternatively, use a microliter pipet to directly take up the reaction mix below the 011layer. Remove oil adhering to the pipet tip with a Kimwipe tissue paper. Note that any remaining oil will interfere with the migration of the DNA through the gel. Load a lO+L aliquot from the PCR mixture on the gel and electrophorese at 120 V until sufficient separation of bands between 50 bp and 5 kb is achieved Watch the gel on a UV translllummator
An appropriate gel shows a series of distinct bands. Srze and Intensity of the indtvrdual bands are highly reproducible for each YAC clone. Beside distinct bands, a smear of amplrfication products ranging up to 8 kb can be detected. Overlapping YAC clones should show bands with apparently identical posltlons and intensities, while other bands are distinctly different (see Note 3). Figure 1 shows an example of a typical agarose gel with Alu-PCR-amplifled sequences of eight YAC clones containing human inserts between 150 and 790 kb that belong to a YAC contig prevtously established from the cystic fibrosis gene at band 7q31 (9). 3.3. Probe Labeling 1. Ethanol precipitate PCR products by adding l/25 vol 5M NaCl, l/50 vol 0 5M MgC12, and 2.5 vol 99% ethanol, Leave at -80°C for 30 mm. 2 Centrifuge in an Eppendorf centrifuge for 20 mm. 3 Resuspend the pellet m double distilled water The DNA can now be used for nick translation 4 Label the DNA probe with biotin-I l-dUTP or digoxigenin-1 l-dUTP by mck translation as described by Lichter and Cremer (10) Alternatively, for labeling with biotm-1 l-dUTP, use the nick translation kit of Gtbco-BRL/Life Technologies (Galthersburg, MD) following the mstructions of the supplier (see Note 4). 5 Separate labeled probe from unmcorporated nucleotides by standard gel filtration method such as using a spin column. 3.4. Pretreatment of Chromosome Preparations The quality and pretreatment of chromosome preparations 1s particularly Important for FISH of Alu-PCR-amplified YAC clone sequences. We follow a protocol established by J. Wlegant (Untversity of Letden, The Netherlands) (II), whrch involves pretreating chromosome preparations wrth RNase A (100 pg/mL 2X SSC; 37°C for 1 h) and pepsin (50 l.tg/mL O.OlM HCl; 37°C for 10 min), and postfixing m 1% formaldehyde at room temperature for 10 mm and dehydrating in an ethanol series of 70,90, and 99% for 3 mm each.
YAC Probes in Tumor Cytogenetics
89
12345AB678
Fig. 1. Agarose gel (1.2%) of Alu-PCR-amplified YAC clones of the CF contig (9). Lane 1:
Alu-PCR amplification of a melted agarose plug containing the YAC yCF-11715-R (790 kb). Lanes 2-8: Alu-PCR-amplified YAC clone DNA of yKM19-3 (150 kb), yCF-10 (240 kb), yCF-7 (240 kb), yCF-5 (280 kb), yW30-5 (260 kb), yJ31 l-3 (340 kb), and yJ31 l-l (350 kb), respectively. Marker lane A: hlHind III; markerlaneB: 123-bpladder.OverlappingYAC clonesshow
bands with apparently identical position and intensity, while other bands are distinctly different. Reproduced by permission from Genomics 13,827.
3.5. Hybridization and Probe Detection Chromosomal in situ suppression (CISS-) hybridization (12-14) is carried out as described in detail by Lichter and Cremer (ZO), with the following modifications: 1. For each slide (18 x 18 mm hybridization area), combine: a. 100-150 ng of labeled Alu-PCR-amplified DNA-probe; b. Between 5 and 50 j.tg of unlabeled Cot-l DNA (see Note 5); and c. 10 pg salmon sperm DNA. 2. Add 1/2Oth vol of 3M sodium acetate and 2 vol of ethanol. Mix well and leave at -80°C for 30 min. 3. Centrifuge in an Eppendorf centrifuge for 30 min at 4°C. 4. Discard the supernatant and wash the pellet by adding 400 PL of 70% ethanol. 5. Spin for 5 min. 6. Discard the supematant and lyophilize in a SpeedVac. 7. Resuspend the dried pellet in 5 pL of deionized formamide and 5 PL of hybridization buffer. Vortex vigorously for several minutes. 8. Refer to other chapters in this volume (e.g., Chapters 4, 7, and 10) for denaturation and preannealing of the probe, denaturation of the chromosome preparations, hybridization, washing, and detection procedures.
90
Lengauer, Speicher, and Cremer
YAC Probes in Tumor Cytogenetics
91
9 After CISS-hybridization and probe detection, counterstain chromosome preparations with 0.2 pg/mL DAPI and/or 1 pg/mL propidmm iodide (dependmg on the fluorochromes used for detection) and mount in fluorescence antifade buffer. Photomicrographs are taken with a Zeiss (Oberkochen, Germany) photomicroscope III equipped for epifluorescence, or a Zeiss Axrophot. Agfachrome 1000 RS color slide films are used. A typical result is shown in Fig. 2A.
4. Notes 1 Applications: A/u-PCR-generated probes from YAC clones containing inserts from unique sites of the human genome provide Ideal tools for the analysis of specific numerical and structural chromosome aberrations. They can be used with high reliability in patients with various hematologic diseases at all stages of the cell cycle. For example, YAC clones have been applied to visualize specrfic structural chromosome aberrations in peripheral blood cells from patients with myelodysplasla exhibiting the deletion del(5)(q13q34), and acute promyelocytm leukemia (ANLL M3) with the translocation t( 15;17)(q22;q21) (6). Figure 2C,D shows a metaphase spread (C) and interphase nuclei (D) from a patient with chronic myeloid leukemia (CML) exhibiting the translocation t(9,22)(q34;ql I) after FISH wrth the brotinylated Alu-PCR-amplified sequences of YAC clone D107F9. This clone spans the breakpoint cluster region (BCR) on chromosome 22 2. Large YACs and YAC contigs of increasing size (15), including YACs spanning and flanking tumor-specific breakpoints (6,16-19), are rapidly becommg available for each band of the human chromosome complement. While many YAC clones show signals restricted to one specific chromosome band, others show signals on different chromosome subregions, indicating that these subregtons contain sequence homologies or that a given YAC clone contains several YACs or (more likely) a chimeric YAC. 3. The yield of Alu-PCR amplificatron products that can be expected for a given YAC depends on the sequence, number, and distance of Ah elements in the human insert. The following procedure can be applied for YACs from Alu-poor Fig. 2 (opposrte page) (A) Normal humanlymphocyte metaphasespreadand adjacent interphasenucleusafter fluorescencem situ hybridizationof blotinylatedAlu-PCR productsof YAC cloneA168H4. Thus550-kbYAC containsthe protooncogene c-raf-1, Probedetectionis performedwith avidm-FITC Chromosomes are counterstainedwith propidmmIodide Specific signalsareseenon 3~25.Two specificsignalsarealsodetectedin theadjacentinterphase nucleus.One hundredconsecutrvelyevaluatedmetaphasespreadsshowedthe expectedsignals on both homologsand both chromatids.In addition, 96% of 400 evaluatedinterphase nucler showedtwo clearly separatedsignals.(B) Schemeshowingthe expectedoutcomeof a FISH experimentusingYAC cloneD107F9to chromosomes andmterphasenucleiof a normal patient(upperrow) andof a patientwith chronicmyeloidleukemia(CML) exhibttmg thetranslocattont(9,22) (q34;qll) (lower row) This 215kb YAC spansthebreakpointclusterregion (BCR) on chromosome 22 (C) Metaphasespreadof a patientwith CML exhibltmg thetranslocation t(9;22)(q34;qll) after FISH of blotinylated Alu-PCR productsof YAC clone D107F9. Probe detection IS performed with avidin-FITC Chromosomesare counterstainedwith propidmmiodrde.Signalscanbeseenon bothchromatidsof thenormalchromosome 22 (large arrow), the Philadelphia chromosome(small arrow), and the dertvative chromosome9 (9pter+gq34::22ql1+22qter) (arrowhead).(1)) Threeinterphasenucletof the samepatient.
92
Lengauer,
Speicher,
and Cremer
regions that give very httle Alu-PCR products and accordmgly yield only weak fluorescent signals after FISH The YAC is first separated from the yeast chromosomes by pulsed-field gel electrophorests (PFGE) in a low-melting-pomt agarose gel. After cutting out the respective band, umversal DNA ampllfrcatron protocols are apphed to overcome the problems of the limited YAC DNA amounts present in the PFGE band For this purpose, an aliquot (5-50 ng) of the melted agarose piece containing the YAC is applied to a PCR assay using the degenerate ohgonucleotrde primer MW-6 (DOP-PCR) (20) (see Chapter 3). This approach provides amplified YAC DNA probes that yield strong, specific stgnals on human metaphase spreads and m interphase nuclei (27). 4. The size of labeled probe should ideally be smaller than 500 bp and larger than 100 bp. A predominant probe size at 250-300 bp seems optimal m our hands for efficient FISH with low background. Biotm-1 l-dUTP or drgoxigenm-1 1-dUTP can also be incorporated directly during the PCR assay. However, many amplifrcation products are larger than required for optrmal FISH and should be posttreated with approprtate concentrations of DNase I 5 For each YAC clone, the optimal amount of unlabeled Cot-l DNA should be determined emprrrcally. Use of excessive amounts of Cot-l DNA do not impair the results of CISS-hybridization, but can create a financial burden. When simultaneously hybridrzing A/u-PCR products of multiple YAC clones m one experi-
ment (see Note 6), the amount of Cot-l DNA does not have to be increased proportronally
but can remain almost the same.
6. Alu-PCR-amplified
products from a series of YACs can be combined as a multi-
plex probe for FISH to yield reproducible signals on a number of chromosome bands simultaneously. Using various pools of Alu-PCR-amplified YACs, new
types of colored chromosome banding patterns, called chromosomal bar codes, can be obtained on human chromosomes (22). Owing to their high hybridization efficiency, such multiplex probes can be implemented for diagnostic applica-
tions as a complementary
tool to conventional banding Chromosomal
bar codes
can be tailored to specific diagnosttc goals in clinical and tumor cytogenetics can help to improve automated chromosome analysis
and
Acknowledgments We are grateful to H. C. Rtethman (The Wistar Institute, Philadelphia, PA), E. D. Green and M. V. Olson (Washington University School of Medicine, St. Louis, MO) for provtding various YAC clones and helpful discussions. This work was supported by a grant from the Deutsche Krebshilfe (W 23/90/Crl) and the European Community (GENO-CT91-0029, SSMA).
References 1 Burke, D. T., Carle, G F , and Olson, M V. (1987) Cloning of large segments of exogenous DNA into yeast by means of artificial chromosome vectors Sczence236,806-812 2 Selleri, L., Hermanson, G G , Eubanks, J H , and Evans, G A (1991) Chromosomal m srtu hybridization usmg yeast artrficral chromosomes. Genet Anal Tech Appl 8,59-66 3 Nelson,D. L., Ledbetter,S A , Corbo,L , Victoria, M F., Ramirez-Sohs,R., Webster,T , Ledbetter,D. H , and Caskey,C T (1989)Alu polymerasechain reaction:a methodfor
YAC Probes in Tumor Cytogenetics rapid isolation of human-specific sequences from complex DNA sources Proc. Nat1 Acad Scl USA 86,6686-6690.
4 Lengauer,C., Green,E. D , andCremer,T (1992)Fluorescencein situ hybrrdrzationof YAC clonesafter Alu-PCR ampbfication.Genomrcs 13,826-829 5 Kariya, Y , Kato, K., Hayashtzaki,Y., Hrmeno,S , Tarur, S., and Matsubara,K (1987) Revisionof consensus sequence of humanALU repeatsa revrew. Gene 53, l-10 6 Lengauer,C , Riethman,H C., Speicher,M R , Taniwakr,M , Koneckt,D., Green,E D , Becher,R , Olson,M V., andCremer,T (1992)Metaphaseandinterphasecytogenetics with Alu-PCR amplifiedYAC clonescontainingthe BCR-geneandthe protooncogenes craf-1, c-fms,c-erbB-2. Cancer Res. 52,2590-2596 7 Green, E. D and Olson,M. V. (1990) Systemattcscreeningof yeast artrfmral-chromosomeltbrarresby useof the polymerasechain reaction.Proc. Natl. Acad. Scr USA 87, 1213-1217 8 Brownstein,B. H Silverman,G., Little, R. D , Burke, D T , Schlessinger, D , andOlson, M. V (1989)Isolationof single-copyhumangenesfrom a library of yeastartrfrcratchromosomeclones.Science 244,1348-l 351 9 Green,E D. andOlson,M V. (1990)Chromosomal regionof the cystrc fibrosisgenem yeastartrfrcial chromosomes. a modelfor humangenomemapping.Science 250,94-98. 10 Lichter, P andCremer,T. (1992)Chromosome analysisby non-isotopicin situ hybrrdrzanon, in Human Cytogenetrcs A Practrcal Approach (Rooney,D E andCzepulkowskt,B H , eds), IRL, Oxford UmversrtyPress,Oxford, pp. 157-192 11 Rred,T., Lengauer,C , Cremer,T , Wregant,J , Raap,A K , vanderPloeg,M , Grortl, P , andLtpp, M. (1992)Specificmetaphase andinterphasedetectionof thebreakpomtregion in 8q24of Burkrtt lymphomacellsby triple color fluorescence in situhybrtdrzatron Genes Chrom. Cancer 4,69-74
12. Cremer,T , Lrchter, P , Borden,J , Ward, D C , andManuebdrsL. (1988)Detectionof chromosome aberrationsm metaphase andInterphasetumorcellsby in situ hybridtzation usmgchromosome-specificlibrary probes Hum Genet 80,235-246 13. Lrchter, P , Cremer,T , Borden,J., Manuelrdrs,L., andWard, D. C (1988)Delmeatronof mdivrdualhumanchromosomes in metaphase andinterphasecellsby m situ suppression hybrtdrzatronusingrecombinantDNA libraries,Hum. Genet 80, 224-234 14. Pinkel, D , Landegent,J , Collms,J., Fuscoe,J , Segraves,R , Lucas,J , andGray, J W. (1988)Fluorescencein srtuhybridtzation wrth humanchromosome specifichbrarres.detection of trisomy 21 andtranslocationof chromosome 4 Proc Nat1 Acnd Scr USA 85, 9138-9142. 15. Bellanne-Chantelot,C , Lacmx, B., Ougen,P , Brllault, A, Beaufils, S., Bertrand, S , Georges,I , Ghbert, F., Gros,I , Lucotte,G , Susim,L., Codam,J J., Gesnouin,P., Pook, S , Vaysserx,G , Lu-Kuo, J , Ried,T , Ward, D., Chumakov,I , Le Paslier,D., Banllot, E , andCohenD. (1992)Mappingthe wholehumangenomeby fingerprintingyeastartrfictal chromosomesCell 70,1059-l 068 16 Rowley, J. D., Dtaz,M O., Espmosa III, R., Patel,J. D , vanMelle, E., Ziemm,S , TarllonMiller, P , Lichter, P , Evans, G. A., Kersey, J H., Ward, D C., Domer,P. H , and Le Beau, M M. (1990) Mapping chromosomeband 1lq23 in humanacuteleukemiawith brotinylatedprobes,rdentrficationof 1lq23 translocattonbreakpoints with a yeastarnticial chromosome. Proc. Natl. Acad. Sci USA 87,9358-9362 17. Goa, J., Erickson,P , Gardiner,K , Le Beau,M M., Diaz, M 0 , Patterson,D., Rowley, J D., andDrabkin,H A. (1991)Isolattonof ayeastartificial chromosome spanningthe 8;21 translocatronbreakpointt(8;21)(q22;q22.3)m acutemyelogenousleukemia Proc. N&l. Acad. Set USA 88,4882-4886
18. Selleri, L., Hermanson,G. G., Eubanks,J. H., Lewis, K A., and Evans, G A. (1991) Molecular localrzatronof the t(l1,22)(q24;q12)translocationof Ewmg sarcomaby chromosomalin situ suppression hybridization Proc Nat1 Acad Set. USA 88,887-891
94
Lengauer,
Speicher,
and Cremer
19 Hertz, D., Rousseau, F , Devys, D., Saccone, S , Abderrahin, H., Le Paslier, D., Cohen, D , Vincent, A., Toniolo, D., Della Valle, G , Johnson, S , Schlessmger, D , Oberle, I , and Mandel, J. L. (1991) Isolation of sequences that span the fragile X and identification of a fragtle X-related CpG Island. Science 251, 1236-1239 20 Telenms, H , Carter, N P., Bebb, C E , Nordenskjold, M., Ponder, B A., and Tunnachffe, A (1992) Cytogenetrc analyzis by chromosome painting using DOP-PCR amplified flowsorted chromosomes. Genes Chrom. Cancer 4,257-263 21 Lengauer,C., Spetcher,M. R., Rred,T., andCremer,T. Unpubhshedresults. 22 Lengauer,C , Speicher,M R , Popp,S.,Jauch,A., Tamwaki,M., Nagaraja,R , Rtethman, H C., Donis-Keller,H , D’Urso, M , Schlessinger,D., and Cremer,T (1993) Chromosomalbarcodesconstructedby multicolorfluorescence in srtu hybndizatronwith multiple YAC clonesandwholechromosome paintingprobes.Hum Molec Genet 5,505-S 12
CHAPTER 9
Primed Johnny
In Situ (PRINS)
Labeling
of DNA
Hind&& J#rn Koch, Jens Mogensen, Steen K&vraa, and Lars Bolund
1. Introduction During the last two decades, techniques for the detection of specific DNA and RNA sequences in situ have been developed. In the beginning, only radioactive detection was possible, which to some extent made these techniques unsuited for routine purposes. Withm the last decade, a number of nonradroactlve detection methods have become available, resulting in a much more wldespread use of in situ hybridization. These methods have become of great value, e.g., as a supplement to traditional cytogenetlc analysis m the identlflcation and quantification of numerlcal and/or structural aberrations m both clinical genetics and cancer diagnosis. In this chapter, we present the primed in situ (PRINS) labeling technique, which we have developed as a fast and sensltlve alternatlve to the more traditional fluorescence in situ hybridization techniques. The strategy m PRINS (Fig. 1) is that an unlabeled probe is mixed with nucleotides (of which at least one 1shapten-labeled) and DNA polymerase. The mixture IS then applied to a slide with metaphase chromosomes. When the probe hybridizes to its target sequence in the chromatin, it functions as a primer for chain elongatton using the chromosomal DNA as a template. The cham elongation 1scatalysed by a DNA polymerase that mcorporates the nucleotides, and thus labels the site of hybridization (1‘2). A major difference between the PRINS technique and the traditional in situ hybridization methods is that the DNA probe m PRINS 1s unlabeled. This means that nonspecifically bound probe DNA will not give rise to background signals, as only probe DNA hybridized to its target sequence can be used as primer for chain elongation. As a consequence, high amounts of probe DNA can be used without background problems. This abihty to use high amounts of probe DNA makes the PRINS method very fast and thus mmlmlzes unnecessary damage to cell and chromosome structures. The relatively gentle nature of this technique means that subsequent high-quality Q-banding of prometaphase and metaphase chromosomes can be achieved, making evaluation of the results easier. Furthermore, since the length of the chain elongation 1smdependent of the length of the primer, good labeling can be achieved with both short oligonucleotides as well as longer, cloned DNA. From Methods m Molecular Btology, Vol 33 In SIIU Hybrrdrzat/oon Protocols Edlted by K H A Choo CopyrIght Q 1994 Humana Press Inc. Tolowa, NJ
95
Hindkjaer
96 primer
t-) +
dNTP
6 O(p
et al.
DNA polymerase
+
@
5’
3’
CHROMOSOMAL DNA Fig 1, A schematic PRINS reaction The probe DNA IS annealed to its target sequence on the chromosomal DNA The probe DNA then functrons as a prrmer In a cham elongatron reaction catalyzed by a DNA polymerase Durmg the cham elongatton, nucleottdes, of which one type is hapten-labeled (shown with a black dot), are incorporated into the chromosomal DNA, and thus label the site of hybrrdtzatlon m srtu
In this chapter, we describe a detailed protocol for PRINS labeling of repetrtive sequences using oligonucleotrdes and cloned DNA probes. In addition we present a method for multicolor PRINS m which two different probes are simultaneously visualized on the same metaphase preparation. Finally, a prellminary protocol for the PRINS labeling of single-copy genes is presented. 1.1. Detection of Repeated Sequences Using Oligonucleotides as Primers in a PRINS Reaction
Only 510% of the total human DNA is coding. A major proportion of the noncoding DNA is composed of repeated sequences, either orgamzed as dispersed repeats,where a single motrf is spread over the genome, or as tandem repeats, which are organized in blocks on specific regions of the chromosomes. All repeat families can be defined by a consensus sequence from which the various monomers deviate only slightly. By making a synthetic ohgonucleotide from the consensus sequence of a family of repeats, it is possible to obtain very good labelmg of the corresponding chromosomal regrons using PRINS. We illustrate this by labeling the human chromosome ends with an ohgonucleotide representing the telomeric sequences (Frg. 2A). A special advantage of oligonucleotide primers is their ability to differentiate between closely related sequences, This potential can be utilized for chromosome-specific staining using an oligonucleotide synthesized from a chromo-
PRINS Labeling
of DNA
97
some-specific motif within one of the monomers from the a-satellite DNA higher order repeat. This is illustrated in Fig. 2B, where chromosome-specific labeling of chromosome 18 is shown. Furthermore, we and others have obtained good labeling of satellites I, II, III, and IV, Alu repeat, and p-satellite DNA on human chromosomes (2,3). In addition, specific labeling of a characteristic repeat family on the Y chromosome, and labeling of dispersed dG-dT repeats, have been obtained on chromosomal preparations from pigs ($5). The detailed protocol for PRINS labeling with oligonucleotides is given in Section 3.1. 1.2. PRINS
Detection of a-Satellite DNA with Cloned Probes As an alternative to designed oligonucleotides, cloned probes, shortened by restriction enzyme digestion, can be used as primers for PRINS labeling. This approach will be demonstrated here with the a-satellite DNA repeat family. Alpha-satellite DNA consists of higher order repeats which are situated in the centromeric regions of the human chromosomes (6). These higher order repeats are made up of a specific number of monomers of approximately 171 bp in length, and are organized as a-satellite DNA subfamilies. The DNA sequences of the monomers deviate slightly among the different subfamilies and, therefore, give rise to chromosome-specific subfamilies. Alpha-satellite DNA subfamilies have been isolated and cloned from all human chromosomes, and unique ones for nearly all the chromosomes have been found (7). This means that chromosome-specific PRINS labeling can be performed at high stringency using primers generated from these chromosome-specific a-satellite DNA clones. The primers used for PRINS labeling should preferably be less than 200 bases long. The higher order repeats of the a-satellite DNA can be cleaved into the 171-bp monomers with the restriction enzyme Dde I. The monomers can then, after denaturation, be used as primers in a PRINS reaction, This method gives strong and chromosome-specific centromeric labeling, which can easily be evaluated on both metaphase chromosomes and interphase nuclei. The whole process of labeling and evaluation of the result can be achieved in less than 2 h. Figure 3A shows the result of a PRINS labeling of the centromere of the X chromosome with an X-specific cloned probe pBamX7 (8). Figure 3B shows the result of interphase nuclei labeling using a chromosome 7-specific probe. The protocol for these experiments is given in Section 3.2. 1.3. Multicolor PRINS It is often useful to be able to perform dual labeling with two probes m different colors on the same cell or metaphase spread. This is possible with the PRINS technique and involves doing two successive PRINS reactions on the same shde, using differently labeled dUTP in the two reactions. A major advan-
98
Hindkjaer
Figs. 246.
et al.
PRINS La be1ing of DNA
99
tage of the multicolor PRINS is that the two primers do not need to have the same melting temperature, since the annealing of the primers is performed m different steps. This means that a short ohgonucleotrde and a longer DNA fragment from a cloned probe can be evaluated in parallel. Normally, tt makes no difference which probe is used in the first PRINS reaction since the chain elongation reaction significantly extends the length of the hybrid DNA and, thus, prevents the first chain-elongated primer from dissociating from its target site on the chromatin even if the second probe requires annealing at a higher temperature. An example of PRINS labeling using an oligonucleotide specific for telomeric repeats and aDde I-digested X chromosome-specific a-satellite DNA probe is shown in Fig. 4. The detailed protocol for the experiment is described in Section 3.3. 1.4. Detection of Single-Copy Genes Using a Cocktail of Primers Encouraged by the fact that the small p-satellite repeat (consistmg only of 25-50 copies of a 68-bp sequence per chromosomal site) can readily be visualFigs. 2-4,6 (opposrtepage) (see color plate number 4 after p. 172). (Fig. 2) PRINS labelmg of human chromosomes using ohgonucleotide primers. (A) PRINS labelmg of the telomeres of chromosomes from a patient with a ring chromosome The PRINS reaction IS performed at 55°C usmg a 42-mer oligonucleottde (CCCTAA), representmg the telomeric sequences. All chromosomes show telomenc labeling except for the ring chromosome (arrow) which has apparently lost its telomeres. (B) PRINS labeling of the centromere of chromosome 18 using a 35mer oligonucleotide representing a chromosome 18-specific region m one of the monomers in the a-satellite DNA higher order repeat of this chromosome Reaction temperature is 55°C. (Fig. 3) PRINS labehng of human chromosomes using a Dde I restrictiondtgestedX chromosomeor chromosome 7-specificu-satelliteDNA probeasprimer, andbiotin-l l-dUTP asthe labeled nucleotide. (A) PRINS labeling of chromosomes from a normal female showing specificlabelingof the two X chromosomes in boththe Interphase nucleusandon the metaphase spread.The specificity of the labelingmeansthat aneuploidystudiescanbe performedin interphasenuclei (B) PRINS labelingof interphasenuclei from a patient with SBzarysyndrome. Tumorcells,whichareneartetraploid,havefour chromosomes 7 (arrow),andnormalcellshave two chromosomes 7 (arrowhead).Reactiontemperatureis 70°C (Fig. 4) Multicolor PRINS of chromosomes from a normalfemale.In the first PRINS reaction,an oligonucleotideof the telomericsequence(CCCTAA), is usedasprimer, anddtgoxtgemn-1l-dUTP is mcorporated This reactionISperformedat 55°C After washinganddehydration,3’-endsare blockedwith dtdeoxynucleohdes.A secondPRINS reactionis performedat 70°C usingDde I cleavedX chromosome-specific a-satellite DNA (pBamX7) asprimer, and biotm-1l-dUTP as labeled nucleotide.Digoxigenin-labeledDNA is detectedwith antidigoxigenin-fluorescent, Fab fragments,andbiotin-labeledDNA is detectedwith rhodamineavidm. Chromosomes arecounterstainedwith Hoechst33258.(Fig. 6) PRINS labelingof humanchromosomes from a normal personusing,asprimers,18oligonucleotides, derivedfrom exonsequences of thetumorsupressorgene~53.The oligonucleotidesare20-mers,eachwith a theoreticalmeltingtemperatureof about 61-64”C The PRINS reactionis performedat 58°C for 90 mm with digoxigenm-1IdUTP asthe labelednucleotide.LabeledDNA is detectedwith anttdigoxigenin-fluorescein, Fabfragments.Arrows showthe signalon the p-arm(the expectedlocationof the ~53gene)of two chromosomes, which werefound to bechromosome17with subsequent Q-banding
100
Hindkjaer
et al.
Fig 5 A schematic PRINS reactlon for the detectlon of single-copy genes The four arrows represent four different oligonucleotldes which function as primers Two are placed in each exon (hatched boxes) pomting away from each other, which offers the advantage that cham elongation from the two primers in each exon ~111not mutually Interfere The figure also shows how both the exons and introns (nonhatched box) are labeled in a PRINS reactlon.
ized with the PRINS technique (3), we are currently refining the technique for the detection of single-copy genes. As described below, an added incentive 1sthat the PRINS technique can potentially allow the labeling of a whole gene, mcluding introns, with probes representing only exon sequences. Another advantage of the PRINS technique 1s that It does not rely on the possession of a cloned probe for the target. As long as the sequence of the gene is known, a cocktail of ohgonucleotides can be synthesized for use as primers. The strategy for the detection of single-copy genes is shown m Fig. 5. Primers are preferentially chosen such that they are situated “back to back” in the middle of an exon, thus allowing chain elongation to proceed into the mtrons. If two such primers are placed m each exon, then all exons, and a substantial part of the introns, can, m principle, be labeled. This means that much higher amounts of labeling can be generated with PRINS compared to traditional in situ hybridlzatlon with a cDNA probe or a genomic DNA probe covering only part of a gene. In a one-step PRINS experiment, the primers should naturally be designed to have as similar a meltmg temperature as possible. Section 3.4 describesthe protocol for the labeling of the tumor suppressor gene ~53, which is situated on chromosome 17 (17~13). The ohgonucleotlde pnmers cover only 360 bp of the 1.7 kb coding region of the ~53 gene, while the entire gene covers 18.4 kb. The result of this PRINS labeling IS shown in Fig. 6. 2. Materials 1. Nucleotlde mixture 3.3 mM of each of the three nucleotldesdATP, dCTP, and dGTP (Boehrmger Mannheim, Mannhelm, Germany). 2. Labeled dUTP: Dlgoxigenin- 11 -dUTP (Boehringer Mannheim), fluorescem- 12dUTP (Boehringer Mannheim), and biotin-1 I-dUTP (Sigma, St. Louis, MO). 3 Dideoxy-nucleotide mixture: 2.5 mi14 of each of ddATP, ddCTP, ddGTP, and
ddTTP (Boehringer Mannheim). 4 Taq DNA polymerase (BoehringerMannheim or Perkin-Elmer/Cetus, Norwalk, CT) 5. 10X Taq polymerase buffer: 500 mA4 KCl, 100 mM Tris-HCl, pH 8.3, 15 mM MgC12, 0.1% (w/v) BSA (or gelatin)
6. Glycerol, 87% (Merck, Rahway, NJ).
PRINS Labeling
101
of DNA
7. Stop buffer 50 mM NaCl, 50 mM EDTA, pH 8 0. 8. Washing buffer: 4X SSC, pH 7.0,0.05% Tween 20. (1X SSC. 150 mM NaCl, 15 mM sodium citrate). 9. Blocking solution: 5% nonfat dry milk dissolved in washing buffer. Centrifuge for 2 min m an Eppendorf centrifuge and use supernatant. 10. Ethanol, 99%. 11. Fluorescein avidm DCS (Vector Laboratories, Burlmgame, CA) 12. Biotinylated Antiavidin D (Vector Labs) 13. Antidigoxigenin-fluorescein, Fab fragments (Boehrmger Mannheim). 14. Antrfluorescein, monoclonal antibodies produced in a mouse (Boehrmger Mannheim). 15. Fluorescein-conjugated rabbit antimouse antibodtes (F261, Dakopatts, Dako, Santa Barbara, CA) 16. Fluorescein-conjugated swine antirabbit anttbodies (F205, Dakopatts) 17. Antifade solutton: 10 mg/mL p-phenylenediamine dihydrochlortde in 80% glycerol (v/v), O.lM Tris-HCl, pH 9.0. 18. Propidium iodide 19. Hoechst 33258. 20. Staining jars. 2 1. Thermo-block. 22. Water bath with humtdtfied chamber. 23. Dde I, restriction enzyme (Boehringer Mannhelm). 24. DNA gel electrophorests apparatus. 25 Agarose. 26 10X TBE: 900 mM Tris-base, 900 mM boric acid, 1 mM EDTA. 27. Ethidium bromide.
3. Methods 3.1. PRINS
Labeling
with
Oligonucleotides
3.1.1. PRINS Reaction 1 Reaction mixture Mix 0 5 ug of oligonucleotide representing the target sequence (see Note l), 1.5 l.rL of nucleotide mixture (dATP, dCTP, dGTP, 3.3 mM each), 0 5 pL of digoxigenm-1 1-dUTP (1 mM) (see Note 2), 2.5 PL of glycerol (87%), and 5 PL of 10X Taq polymerase buffer. Add HZ0 to a final volume of 50 p.L. (It is often easier to add Hz0 first to ensure that the small volumes of the other reagents are totally dispensed into the reaction mixture.) 2 Add 1 U of Taq DNA polymerase (see Note 3) and mix gently by tapping a finger on the Eppendorf tube. 3. Preheat the slide with the metaphase chromosomes (see Note 4) on a thermoblock at 94’C for about 15 s. 4. Denaturation of chromosomal DNA: Apply the reaction mixture to the preheated slide, spread, and cover with a 25 x 50 mm coverslip. Denature the chromosomal DNA for 4 min at 94°C. 5. Probe annealing and chain elongation. Transfer the slide quickly to a humidified chamber m a water bath at the stringent temperature (see Notes 1, 5, and 6). Incubate for 30 mm.
102
Hindkjaer
et al.
6 Wash the slide in 100 mL of preheated stop buffer at reaction temperature (see step 5) for 1 mm to terminate PRINS labeling. 7. Transfer the slide to 50 mL of washing buffer in a stammg jar with screw cap, and wash for 3 mm at room temperature under gentle agitation 3.1.2. Visualization of Digoxigenin-Labeled DNA 1. Drain the slide and apply 100 l.rL of blocking solution. 2. Incubate for 5 min at room temperature under a plastic coverslip (see Note 7) in a humidified box. Perform all further incubations and washings at room temperature. 3. Wash the slide for 15 s m 50 mL of washing buffer. 4. Drain and add 50 PL of antldlgoxigenm-fluorescem, Fab fragments in blocking solution (2 ng/l.rL) to the slide. 5. Incubate for 30 min under a plastic covershp. 6 Wash three times for 5 min in 50 mL of washmg buffer under gentle agitation. 7. Mount the slide in 20 l.tL of antlfade solution containing propidium iodide (0 5 WmL). 8 Evaluate the result under a fluorescence microscope. If stainmg is too weak, apply additional layers of fluorescein-conJugated antibodies as described below. 9. Wash the slide twice for 5 mm m washmg buffer. Remove the coverslip after the first wash. 10. Add 100 l.rL of antifluorescein antibodies in blocking solution (5 ng&L), and incubate for 30 min. 11. Wash three times for 5 min in washing buffer. 12. Add 100 FL of fluorescein-conjugated rabbit antimouse antibodies (diluted 100X in blocking solution), and incubate for 30 min. 13 Mount in antifade solution containing propidium iodide, and evaluate under the microscope. If signal is still too weak, apply an additional layer of fluorescein-conjugated antibodies as described below. 14 Wash the slide twice for 5 min in washmg buffer. Remove the coverslip after the first wash 15 Add 100 pL of fluorescem-conjugated swine antirabbit antibodies (diluted 100X in blocking solution), and incubate for 30 min 16. Mount in antifade solution contammg propidmm iodide and evaluate under the microscope. If stammg is still too weak, repeat steps 9-16. 3.2. PRINS Labeling with Cloned MJatellite DNA Probes 3.2.1. Generatton of Primers from Cloned a-Satellite DNA 1. Cleave 100 pg of cloned a-satellite DNA with the restriction enzyme Dde I (1 U/ pg DNA) in a total volume of 100 pL for 2-3 h at 37°C 2 Run 1 ltg of the digested DNA on a 2% agarose gel prepared in 1X TBE to check that the DNA is totally cleaved. As a control, run 1 pg of the undigested DNA probe in parallel 3 Following electrophoresls, stain the gel in ethldium bromide (1 pg/mL) for 10 mm. Rinse the gel for 5 min in distilled water. Evaluate the result under UV hght.
PRINS
Labeling
103
of DNA
If the DNA probe is totally cleaved, it is now ready for use in a PRINS reaction (see Note 8)
3.2.2. PRINS
Reaction
1 Reaction mixture: Mix 2.0 pg (see Note 9) of Dde I restriction enzyme digested a-satellite DNA (see Note l), 1.5 pL of nucleotlde mixture (dATP, dCTP, dGTP, 3.3 mM each), 0.5 pL of blotm-l l-dUTP (1 mJt4) (see Note 2) 2 5 pL of glycerol (87%) and 5 l.tL of 10X Tuq polymerase buffer. Add HZ0 to a fmal volume of 50 pL (see note in Section 3 1 1 , step 1). 2 Add 1 U of Taq DNA polymerase (see Note 3) and mix gently. 3. Preheat the slide with the metaphase spread (see Note 4) on a 94°C thermo-block for about 15 s 4 Simultaneous denaturatlon of chromosomal DNA and probe DNA (see Note 3). Apply the reaction mixture to the preheated slide, spread, and cover the mixture with a 25 x 50 mm coverslip. Denature the chromosomal DNA and probe DNA for 4 mm at 94’C 5 Probe annealing and chain elongation Transfer the slide quickly to a humidified chamber in a water bath at stringent temperature (see Notes 1 and 5) Incubate for 30 mm. 6. Wash the slide m 100 mL of preheated stop buffer at reaction temperature (see step 5) for 1 min to terminate PRINS labeling. 7. Transfer the slide to 50 mL of washing buffer in a staining jar with screw cap, and wash for 3 min at room temperature under gentle agttatlon
3.2.3. Visualization
of Biotin-Labeled
DNA
1 Dram the slide and apply 100 pL of blocking solution 2 Incubate for 5 min at room temperature under a plastic coverslip (see Note 7) m a humidified box. Perform all subsequent mcubatlons and washings at room temperature. 3 Wash the slide for 15 s in 50 mL of washing buffer 4. Dram and add 100 pL of fluorescein avldm in blocking solution (2 ng/pL) 5 Incubate for 10 mm 6. Wash three times for 5 min in 50 mL of washing buffer under gentle agitation. 7. Mount the slide m 20 pL of antifade solution containing propldmm iodide (0.5 WmL) 8 Evaluate the result (see Note 10) under a fluorescence microscope. If staining is too weak, apply additional layers of fluorescein avtdin as described below. 9 Wash the slide twice for 5 min m washing buffer Remove the covershp after the first wash. 10. Add 100 p.L of antiavidm antibodies m blocking solution (2 ng/pL), and incubate for 30 min. 11 Wash three times for 5 min in washing buffer. 12. Add 100 pL of fluorescem avtdin m blockmg solution (2 ng/pL) and incubate for 10 min. 13. Wash three times for 5 min in washing buffer, 14 Mount in antlfade solution containing propidmm iodide and evaluate under the microscope. If stammg 1s still too weak, repeat steps 9-14
104 and
Hindkjaer 3.3. Multicolor a Cloned Probe
PRINS Using with Different
et al.
an Oligonucleotide Melting Temperatures
1 Oligonucleotide reaction mixture. Mix 0 5 pg of oligonucleotide DNA representing telomeric sequences, 1.5 pL of nucleotide mixture (dATP, dCTP, dGTP, 3.3 mM each), 0.5 pL of digoxigenm-1 l-dUTP (1 mA4) (see Note 2), 2 5 pL of glycerol (87%), and 5 pL of 10X Tug polymerase buffer. Add H,O to a final volume of 50 PL (see note in Section 3.1.1.) step 1) Add 1 U of Tuq DNA polymerase (see Note 3) and mix gently. Preheat the slide with the metaphase spread (see Note 4) on a 94°C thermo-block for 15 s. Denaturation of chromosomal DNA: Apply the reaction mtxture to the preheated slide, spread, and cover the mixture wtth a 25 x 50 mm covershp Denature the chromosomal DNA for 4 min at 94°C. Transfer the slide quickly to a humidified chamber (see Note 5) m a 55’C water bath, and incubate for 30 min. Wash the slide twice for 30 s at 55°C m 100 mL of preheated stop buffer. Dehydrate the shde in a 4°C ethanol series (70, 90, and 99%, 3 min each in 100 mL). Remove the slide from 99% ethanol, dram, and place it m the humidified chamber at 55’C Preheat the slide for about 1 min. Dideoxy reaction mixture. Mix 2 j.tL of dideoxy-nucleotide mixture (ddATP, ddCTP, ddGTP, ddTTP, 2 5 n&f each), 2.5 pL of glycerol (87%), and 5 p.L of 10X Tuq polymerase buffer. Add Hz0 to a final volume of 50 pL. 10 Add 1 U of Tuq DNA polymerase to the reaction mixture and mix gently. 11 Dideoxy blocking of 3’-ends: Apply the drdeoxy reaction mixture to the preheated slide and incubate in the 55°C humidified chamber for 15 mm. This reaction blocks the free 3’-ends and prevents cham elongation restarting from these ends in the second PRINS reaction. 12 Wash the slide twice for 30 s at 55’C in 100 mL of preheated stop buffer 13. Dehydrate the slide m a 4°C ethanol series (70,90, and 99%, 3 mm each m 100 mL). 14. Transfer the shde to a humidified chamber m a 70°C water bath and preheat for about 1 min. Preheatmg of the slide should occur while steps 17 and 18 are bemg performed. 15 Alpha-satellite DNA reaction mixture: Mix 2 /,tg (see Note 9) of Dde I restriction digested a-satellite DNA (see Section 3.2) of the human X chromosome, 1.5 j.tL of nucleotide mixture (dATP, dCTP, dGTP, 3.3 n&f each), 0.5 pL of biotin-l ldUTP (1 mM) (see Note 2), 2.5 pL of glycerol (87%), and 5 pL of 10X Tuq polymerase buffer. Add Hz0 to a final volume of 50 /.tL. 16. Boil the mixture for 5 mm to denature double-stranded probe DNA. 17 Spm evaporated water down m a microfuge for 10 s. 18 Add 1 U of Tuq DNA polymerase and mix gently 19 Annealing and cham elongation* Apply the reaction mtxture to the preheated shde (step 14). Incubate in a 70°C humidified chamber for 30 mm. 20. Wash the slide in 100 mL of preheated stop buffer for 1 min at 7O’C. 31 Wash the slide for 3 min at room temperature m 50 mL of washing buffer AI
PRINS Labeling
of DNA
105
22 Visualizatton. Perform the digoxrgenin detection procedure first (Section 3.1.2.) and then the biotm detection procedure (Section 3.2.3.). Follow both procedures strictly, except for steps 1 and 2 of Section 3 2 3. (these steps are unnecessary since blocking has already been performed in step 1 of Section 3 1.2. in the drgoxigenin detection procedure). Furthermore, rhodamine avidin is substituted for fluorescein avidin in subsequent steps. Normally, it is not necessary to enhance the telomeric signal by additional layers of FITC conjugated antibodies, whereas it may be necessary to enhance signals of the brotm-labeled a-satellite DNA by an additional layer of rhodamine avidin 23. Chromosomes (see Note 10) are counterstamed for 1 min with 0 5 pg/mL Hoechst in PBS. After counterstaining wash the slide twice for 30 s in PBS Drain the slide and mount in 20 pL of antifade solution, 1
2. 3. 4. 5 6 7. 8. 1
2
3.4. PRINS Labeling of a Single-Copy Gene (~53) Reaction mixture: Mix 0.25 pg of each oligonucleotrde (see Notes 11 and 12), 1.5 l.tL of nucleotrde mixture (dATP, dCTP, dGTP, 3 3 mM each), 0 5 PL of digoxigenin-11-dUTP (1 mM) (see Note 2), 2 5 pL of glycerol (87%), and 5 pL of 10X Tuq polymerase buffer. Add Hz0 to a final volume of 50 pL (see note m Section 3 l.l., step 1). Add 1 U of Tuq DNA polymerase (see Note 3). Mix gently Preheat the slide with the metaphase spread (see Note 4) on a 94°C thermo-block for about 15 s. Denaturation of chromosomal DNA. Apply the reaction mixture to the preheated slide, spread, and cover the mixture with a 25 x 50 mm coverslip. Denature chromosomal DNA for 4 mm at 94°C (see Note 3). Transfer the slide quickly to a humidified chamber (see Note 5) in a 58°C water bath and perform primer annealing and chain elongation for 90 min Wash the slide m 100 mL of stop buffer at 58’C for 1 min. Transfer the slide to 50 mL of washing buffer, and wash for 3 min at room temperature under gentle agitation. Visualization See Section 3.1.2 4. Notes When a new probe is used for the first time, it is advisable to try different hybridization temperatures, both higher and lower than the theoretical melting temperature, to obtam a strong and specific signal. Also the amount of probe DNA giving the best signal without cross-hybridization should be determined experimentally for each probe. For different probes we have used from 0 01-10 l.rg DNA Usually, 0.5-2 lr.g of probe DNA works well We have used digoxigenin-, biotin-, and fluorescein-labeled dUTP for PRINS labeling. It is our experience that the strongest signal is obtained using digoxigenin-labeled dUTP, closely followed by biotin-labeled dUTP. Fluorescein-labeled dUTP gives a somewhat weaker signal However, if a probe gives a very strong signal, it can be advantageous to use fluorescein-12-dUTP, as results can be obtained faster and in fewer steps (9). If fluorescem-12-dUTP 1s used and the signal is too weak, it can be enhanced by the procedure described m Section 3.1 2., omitting steps 3-9.
Hindkjaer 3
4
5
6.
10.
11.
et al.
Klenow polymerase can also be used for PRINS labelmg at temperatures below 50-55’C (1,3). However, when the Klenow polymerase is used, the chromosomal DNA and probe DNA (if double-stranded) must be denatured separately, as the Klenow polymerase is not thermostable. Chromosomal DNA is denatured m 70% formamide, 2X SSC, pH 7 0, at 70°C for 2 mm followed by dehydration m an ice-cold ethanol series Probe DNA mixture (if double-stranded) 1s denatured by boiling for 5 min Evaporated water IS recovered by centrifugation (this also cools the mixture), and 1 U of Klenow polymerase IS added. The DNA reaction mixture is then applied to the slide, which has been preheated for 1 mm at hybrtdization temperature It is preferable to use freshly spread metaphases, since chromosomes from older preparations may contain nicks that can give rise to background signals (see Note 10) This problem can be solved by repairing the nicks with T4 DNA hgase (1 U per slide in 50 PL of ligase buffer for 1 h at room temperature) (10) The ligation reaction is stopped by washing the slide in stop buffer for 1 min at room temperature followed by dehydration in an ethanol series After this, the PRINS reaction can be performed. If evaporation of the reaction mixture during incubation is a problem, this can be the result of an ineffective humidified chamber Alternattvely, glycerol, which decreases evaporation, may have been omitted from the reaction mtxture. The Tuq DNA polymerase has been successfully used m PRINS labeling employing a 16-mer ohgonucleotide at the relatively low temperature of 3O”C, and may work at even lower temperatures. The plastic coverslips used in the vtsualization procedures are cut from a “plastic pocket ” We use these because of their ease of handling When double-stranded probes are used, lack of signal can be the result of an incomplete restriction enzyme digestton of probe DNA The restriction enzyme digested probe DNA 1s used without extraction of the restriction buffer and enzyme. Therefore, to minimize interference m the PRINS reaction, the volume of probe DNA added to the PRINS reaction mixture must not exceed 10% If a banding pattern 1s seen on all chromosomes, this might be due to m situ nick translation by the Tuq DNA polymerase. This can occur if mcks are produced in the chromosomal DNA by the restriction enzyme, if it is thermostable and/or has not been properly macttvated m the denaturatton step If this is the case, the probe DNA mixture must be boiled for 5 mm prior to application to the slide After boiling, the DNA mixture is centrifuged to recover evaporated water Tuq DNA polymerase is then quickly added, and the reaction mixture 1s applied to the preheated slide The ohgonucleottdes (20-mers) for the detection of the single-copy gene ~53 are chosen from the cDNA sequence of the gene. These ohgonucleotides are found using a computer program (“oligo,” MedProbe, Oslo, Norway) that gives the theoretical melting temperature of an oligonucleotide. Wherever possible, two oligonucleotides are designed for each exon (see Section 1.4 ). However, if it is not possible to fmd oligonucleotides with matching meltmg temperatures m an exon, they are omitted. Also, to avoid false signals, ohgonucleotides that share homology with repeat sequences are discarded. The ohgonucleotides used for the
PRINS
Labeling
of DNA
detection of the tumor suppressor gene ~53 were checked for repeated sequences with a mismatch of 4 nucleotides The ~53 gene consists of 11 exons However, only 18 suitable oligonucleotides were found and used. 12. If a cDNA probe is available, it may not be necessary to synthesize oligonucleotides. The cDNA can be dlgested into primers of suitable lengths by cleaving the probe with several restriction enzymes (2) A good approach would be to choose restriction enzymes that cleave the cDNA in a way that generates primers within an exon This can be done with the help of a detailed restriction map of the cDNA probe.
References 1 Koch, J E., Kllvraa, S., Petersen, K. B , Gregersen, N., and Bolund, L (1989) Ohgonucleotide-priming methods for the chromosome-speafic labelling of alpha satellite DNA m situ Chromosoma 98,259-265. 2. HmdkJier,J., Koch, J , Mogensen,J , Pedersen,S., Rscher,H , Nygaard,M., Junker,S., Gregersen,N , Kolvraa, S., Therkelsen,A J., andBolund,L (1991)Prlmedm situ labellmg of nucletc acids Biotech Forum Eur. 12,752-756 3 Gosden,J., Hanratty, D , Starlmg, J., Fantes,J , Mitchell, A, and Porteous,D (1991) Oligonucleotide-primed m situDNA synthesis(PRINS), a methodfor chromosome mapping, bandmg,and investigationof sequenceorgamzatlon.Cytogenet Cell Genet. 57, 100-104 4 Thomsen,P. D , Hindkjrer,J , andChristensen, K (1992)Assignmentof a porcinemalespecificDNA repeatto Y-chromosomalheterochromatinCytogenet Cell Genet. 61,152154
5 Winter@,A. K , Fredholm,M., and Thomsen,P. D. (1992)Variable (dGdT), (dCdA), sequences m the porcinegenome.Genomux 12,281-288. 6. Wtllard, H F. andWaye, J. S (1987)Hierarchicalorderin chromosome-specific human alphasatelhteDNA Trends Genet. 3, 192-198 7. Choo, K H , Vessel,B., Nagy, A , andKalitsis,P. (1991)A survey of the genomlcdlstnbutton of alphasatelliteDNA on all the humanchromosomes, andderlvatlon of a new consensus sequenceNuclercAcids Res. 19, 1179-l 182 8 Waye, J S. andWillard, H F (1985)Chromosome-specific alphasatelliteDNA, nucleotide sequenceanalysisof the 2.0 kllobasepairrepeatfrom the humanX chromosome, Nucleic Acids Res 13,273 1-2743
9 Koch, J , Mogensen,J., Pedersen,S., Fischer,H., HmdkJrer,J , K@lvraa,S., andBolund, L (1992) Fast one-stepprocedurefor the detectionof nucleic acidsm situ by prlmerinducedsequence-speafic labelingwith fluorescein-1ZdUTPCytogenet. Cell Genet. 60, l-3. 10. Koch, J., HindkJaer,J., Mogensen,J., Kelvraa, S , andBolund, L. (1991) An Improved methodfor chromosome-specific labelingof c1satelliteDNA m situ by usingdenatured double-stranded DNA probesasprimersin a primedin situ labelmg(PRINS) procedure. GATA 8,171-178
CH~~PTER 10 Free Chromatin Henry
H. Q. Heng
Mapping
by FISH
and Lap-Chee
l?wi
1. Introduction Different strategies have been introduced to facilitate characterization of complex genomes; the techmques include molecular cloning, agarose gel electrophoresis and blot-hybridization analysis, DNA sequencing, construction of somatic cell hybrid lines, in situ hybridization, as well as genetic (linkage) analysis. Because of their wide application, numerous improvements have been made m each of these areas in recent years, for example, the use of pulsed-field gel electrophoresis (PFGE), yeast artificial chromosome (YAC), and fluorescence in situ hybridization (FISH) (1-4). Obviously, no single method can provide all the information required for detailed analysis of genomes with greater than several billion base parrs (bp) and each method has its limitation in range of resolution. A combmation of different techniques is therefore necessary for any large-scale gene mapping endeavors. FISH is probably the most versatile technique for physical mapping of mammalian genes (3-5). It combines the accuracy of molecular hybridization with fluorescence labeling, and the classical cytogenetic description of chromosomes to provide a rapid physical localization of genes and DNA segments of interest (5,6; see also Chapter 4). Besides its greater precision over radioactive labeling, which requires the use of photographic emulsion, FISH may be used to detect multiple gene segments simultaneously with different color labeling, and fluorescence signals may also be enhanced electronically. FISH mapping with metaphase or prometaphase chromosomes allows distinction of gene segments separated a few megabases (Mb) apart (7). With the increase of cloned genes and DNA segments, however, ordering of markers on individual chromosomes becomes an important aspect of physical mapping. Mapping with meiotic prophase chromosomes is one of the techniques being used in an effort to increase the resolution limits of FISH (8; see Chapter 12). The use of even less-condensedchromatins in the interphase nuclei or pronuclei further improves low-end resolution limits to around 50 kilobase (kb) pairs (9-11). As chromatin fibers assume a less condensed configuration, there is a concomitant loss of chromosome morphology. No banding pattern can be discerned with the highly extended chromatin fibers. Therefore, the high- resolution FISH techniques are mainly used for ordering genes that are known to be m close From Edtted
Methods m Molecular Bology, Vol 33 In Sttu /-fybnd/zatron by K H A Choo CopyrIght Q 1994 Humana Press Inc.
109
Protocols Totowa, NJ
Heng
110 CHROMOSOME
INTERPHASE NUCLEUS
and Tsui
FREE CHROMATIN
Fig. 1. Schematic diagram showing the prinicples of free chromatin mapping compared with FISH analysis using metaphase chromosome and interphase nucleus.
proximity. In addition, the convenience of FISH mapping with interphase nuclei or pronuclei is hampered by the three-dimensional organization of chromatin in the intact nucleus structure; a sophisticated imaging system is often required to trace the order of fluorescence signals. The data become even more difficult to interpret when the distance between markers increases. As for FISH mapping with pronuclei, sperm and animal eggs are cumbersome requirements for the procedure. We have recently developed a FISH mapping technique that proves to be an excellent solution to the above-mentioned problems associated with interphase nuclei and pronuclei. This technique, which we termed free chromatin mapping (12), employs the highly extended chromatin fibers (Figs. 1 and 2) released from the nuclei as the substrate for FISH mapping. When the chromatin fibers are well stretched and situated more or less flat on microscope slides, it is possible to obtain hybridization signals that are arranged linearly, reflecting the order and organization of target sequences in the genome. Although free chromatin structures are occasionally observed during routine metaphase chromosome preparations as spindle-shape or debris-like materials (23-IS), the frequency is too low to be practical for mapping studies. To improve the quality and reproducibility of free chromatin release, we have investigated various treatment conditions and found that some drugs are capable of inducing high-frequency free chromatin formation and that a
Free Chromatin
Mapping
by FISH
Fig. 2. Examples of free chromatin structures after DAPI or Giemsa staining. Panels A-C show the spindle-shape and rope-like free chromatin structures. Panel D shows one Giemsastained free chromatin.
high-pH buffer solution can also achieve the same results (22,15; unpublished data). Using the total human DNA sequence as a FISH probe, we showed that a single human chromosome could be easily identified in the background of hamster chromosomes of a somatic cell hybrid line (12). We also demonstrated
Heng
112
and Tsui
that hybridization signals from DNA sequences as close as 20 kb could be distinguished from one another and that sequences spread over 350 kb (and possibly over 2-3 Mb) of genomic DNA could be rehably ordered and mapped with respect to each other. In this chapter, we describe the detailed protocols for preparing free chromatin structures m high frequency and the methods for FISH detection. 2. Materials 2.1. Cells and Cell
Culture
1 Human lymphocytes (Isolated from healthy blood donors or cord blood) 2 Human and mouse frbroblastoid cell lines. 3 Human-hamster somatic cell hybrid lmes.
2.2. Media
and
Reagents
for
Cell
Culture
for lymphocyte culture, supplemented 1 RPM1 1640 with pemcillin/streptomycin with. 15% (v/v) fetal calf serum, 2% (v/v) phytohemagglutmm (PHA); and 5 U/mL heparin. 2 a-Minimal essential medium (a-MEM) for fibroblast cultures, supplemented with 10% fetal calf serum (biochemical selection may be used for somatic cell hybrid lines) 3 N-[4-(9-acrid~nylam~no)-3-methoxyphenyl]methanesulfonamide (m-AMSA, gift of the Drug Syntheses Branch, National Cancer Institute, Bethesda, MD). Prepare stock solutron by dissolvmg m-AMSA m dimethyl sulfoxrde at 10 mg/mL, dilutmg with equal vol of distilled water and filter-sterrhzmg. Store the solutron at 4°C (see Note 1). 4. 10 mg/mL Ethidium bromide (EtBr) (see Note 1). 5. 10 mg/mL 5-bromodeoxyuridme (BrdU) (see Note 1) 6. 10 mg/mL Hoechst-33258 (H-33258) (see Note 1). 7. 10 mg/mL Thymidine. 8. 10 pg/mL Colcemid
2.3. Alkaline
Lysis
Buffer
1. 1 mM sodium borate solution adjusted to pH 10-l 1 with NaOH 2. KC1 solutron, between 0 4% and 2%, determined empirically 3 Mix Parts 1 and 2 m 1 1 ratio before use
2.4. Microscope 1 2. 3 4. 5. 6
Slide
Preparation
Trypsin-EDTA solution. KC1 Methanol. Acetic acid. Microscope slides and covershps Giemsa stain solution.
2.5. Probes
Preparation
and
Fluorescence
1 Qragen plasmid purrfrcatron column (Qragen, Chatsworth, Buffers (may be attained from Qiagen)
Labeling CA).
Free Chromatin
2.
3. 4. 5 6. 7. 8. 9.
10
Mapping
Pl: 50 mM Tris-HCl, 10 mM EDTA, pH 8,O 1 mg/mL RNase, P2: 0.2M NaOH, 1% SDS; P3. 3.OM K acetate, pH 5.5, Washing buffer 1M NaCl, 50 mM MOPS, pH 7, 15% ethanol; and Elution buffer 1.25M NaCl, 50 mM Tris-HCl, pH 8.5, 15% ethanol. Solutions for YAC DNA preparation. YPD medium: 10 g Bacto yeast extract, 20 g Bacto peptone, and 20 g dextrose per liter of water. GDIS: 2% Triton X-100, 1% SDS, 100 mM NaCl, 10 mM Trts-HCI, lmA4 EDTA. Phenol. Chloroform. Isopropanol. TE buffer. 10 mM Tris-HCl, pH 7.4,O.l mM EDTA. Bionick, brotin-labelmg tuck-translation kit (Gibco-BRL, Gaithersburg, MD) Nick column (Pharmacia, Uppsala, Sweden). Digoxigenin (DIG) labeling. 5X dNTP soluttons. 0.1 mA4 dATP, 0.1 mM dCTP, 0.1 mM dGTP, and 0.05 mM dTTP. 0 05 mA4 Dig-dUTP. 10X reaction buffer 500 mM Tris-HCl, pH 7 8, 50 mM MgCIP, 100 mM pmercaptoethanol, 100 l.tg/mL bovine serum albumin. Sonicated salmon sperm DNA (average fragment size 100-500 bp).
2.6. Prehybridization 1. 2. 3. 4. 5 6. 7. 8. 9 10. 11. 12
113
by FISH
and Hybridization
RNase A Human Cot-l DNA. Ethanol. Formamtde. 20X SSC: 3M NaCl, 300 mM sodium citrate. Denaturing solution: 70% (v/v) formamide, 2X SSC, adjusted to pH 7 with HCl Hybridization solution I (for suppression hybridtzatron): 50% formamtde, 2X SSC, 10% dextran sulfate. Hybridization solution II (for detection of satellite repeat sequences): 65% formamide, 2X SSC, 10% dextran sulfate. Sonicated yeast DNA (average fragment size 100-500 bp). Washing solution A (for cosmid and YAC probes). 2X SSC, 50% formamtde Washing solution B (for satellite sequence) 2X SSC, 65% formamide. Washing solution C 0 1M phosphate buffer, pH 8, with 0 1% Nonidet P-40.
2.7. Fluorescence
Detection
and Signal
Amplification
1 Blocking solution. 3% BSA, 4X SSC, 0.1% Tween-20 2. Detection solution: 1% BSA, 4X SSC, 0.1% Tween-20. 3. 500 pg/mL FITC avidin. Good for a few months rf stored at 4°C m dark. Dilute to 5 pg/mL wrth detection solution before use
114
Heng
and Tsui
4
500 pg/mL Biotmylated goat antiavtdin antibody. Store frozen at -20°C m 50FL portrons Dilute to 5 pg/mL with detection solutron before use. 5 200 pg/mL Antidigoxigemn-rhodamm Fab fragments Store at -20°C in lOO+L portions away from light. Dilute 1 10 wrth FITC detection solution before use Good for a few months if stored at 4°C m dark.
2.8. Chromosome
Counterstaining
1 4’, 6-dtamrdmo-2-phenylindole (DAPI): 0 2 mg/mL stock solution (1000X) in phosphate-buffered saline (PBS). Store in brown bottle at 4°C. 2 Propidmm iodide (PI) 0 1 mg/mL m PBS. 3. Antifade solution. 1 mg/mL p-phenylendiamme m glycerol PBS (9:l v/v), pH 9 0 Store at -20°C.
2.9. Microscope 1 Lertz Aristoplan eprfluorescent microscope wrth DAPI filter, FITC filter, and dual bandpass FITC/Texas red filter 2. DAPI excitation filter: BP 350460, reflector: RKP 510, emtsston filter. long pass 520 3. FITC excitation filter: BP 450-490, reflector: RKP 510; emission filter LP 520 4 Dual bandpass excitation filter: BP 480-505 + BP 560-595, reflector BP 505555 + BP 600-690, emission filter. BP 5 15-540 + BP 6 lo-690
2.10. Kodak Ektachrome black- and white-film.
Photographic
P800/1600
Films
E-6p color film and Kodak TMAX 400 ASA
2.11. Other Essential Items Plastic jars (25mL slide mailers), plastic slide holder, hot plate (WC), bator (37”C), and water baths (37-75°C).
mcu-
3. Methods 3.1. Free Chromatin Preparation 3.1.1. Preparation of Free Chromatin by Drug Treatment
(see Note 2) from Lymphocytes
1 Cell culture. Isolate lymphocytes from 10 mL of fresh human peripheral or cord blood by low-speed centrrfugatton (500 rpm for 5 mm m a clinical centrifuge) or unit-gravity sedrmentatton Collect the white cells by aspiration and transfer 0 50 8 mL of the isolated cells to 20 mL RPM1 1640 m a 50-mL culture flask (Falcon 3082 [Los Angeles, CA]) Keep the culture m COZ mcubator at 37°C without disturbance for 48-52 h before drug treatment (see Note 3) 2 Drug treatment. Treat the lymphocyte culture with various concentratton of mAMSA, EtBr, or H-33258 (between 1 and 20 /.tg/mL) for 2 h before harvesting (see Note 4). 3. Cell harvest and shde preparation a. Transfer 4 mL of the culture to a 15-mL disposable test-tube and collect the drug-treated cells by centrtfugatron at 1000 rpm for 7 mm. Resuspend the cell
Free Chromatin
Mapping
by FISH
115
pellet in 0 3 mL of culture medium, to which 5 mL of 0.4% KC1 solution is then added and mixed well Incubate the cell suspension at 37’C for 10 min b. At the end of the hypotomc treatment, add 0 l-O.2 mL of freshly prepared fixing solution (3:l methanol:acetlc acid) for prefixation. Mix the content gently by mvertmg the tube, then pellet the cells again by centrlfugation (1000 rpm for 7 min). c. Loosen the cell pellet by gently tapping at the bottom of the tube. Resuspend the cells m 5 mL of the fixing solution. Fix at room temperature for 20 mm. d Spin down the cells and resuspend in 0.5 mL of fixing solution. e. Allow 1 drop of the fixed cell suspension to fall onto the surface of a prechilled microscope slide (left on Ice for at least 1.5mm) Dry the slide in air by waving it back and forth. f. Stain the slide with 3% Giemsa solution (pH 6.8) for 5 min at room temperature, and examine the proportion of free chromatin structures under the mlcroscope The optimal drug concentration is then applied to the remainder of the cell culture for preparation of additional slides (see Notes 5 and 6). 4 Storage of slides Slides containing free chromatin preparations may be stored for several months at -20°C Once a good batch of slides is obtained, they should be dried at room temperature for 1 d and then sealed in slide containers with parafilm before transferring to the freezer. Overly dehydrated slides tend to damage the free chromatm structures irreversibly.
3.12. Release of Free Chromatin from Cultured Cells with Alkaline Buffer The rationale behind the use of alkaline buffer m the release of chromatm fibers from cultured cells is based on the observation that nuclear lamms could be disrupted by high-pH treatment (12,16). It is thought that the treatment destablizes the nuclear envelope, which can then be easily ruptured by the hypotonlc solution. Prolonged alkaline treatment, however, may break the nuclear envelope even without hypotonic shock. The following protocol is designed for fibroblastoid cell cultures. It may also be used for somatic cell hybrid lines or other cell types with modlflcations. 1. Cell culture. Grow fibroblasts in a-MEM for 2-4 d after reaching confluency m order to accumulate cells arrested at the Gl phase (see Note 7) 2. Cell harvesting. In general, add 1 mL of trypsin-EDTA (1X) solution to each 60-mm Petri dish. Incubate at 37°C for 30-60 s (see Note 8). Once the majority of the cells becomes detached from the dish, stop the reaction by adding 1 mL of culture medium with serum The next step should proceed quickly 3. Alkaline treatment. Since the optimal condltlon for each particular cell line has to be obtained empirically, a brief screening test 1s recommended: a. Prepare a series of tubes each containing 1 mL of alkaline buffer Transfer an aliquot (0.2-O 3 mL) of the trypsmized cell suspension into each of these tubes m drops and mix the content gently by tapping the tube At various time intervals (3-5 min), terminate the alkaline treatment by adding 5 mL of the fixing solutlon (methanol.acetlc acid, 3.1) (see Note 9)
116
Heng
and Tsui
b. Collect the alkaline-treated cell suspension by centrifugation (1000 rpm). Resuspend the cells in 5 mL of new fixmg solution. The remaming steps of slide preparation are as described in Section 3.1.1 , steps 3d-f (see Note 10). 3.1.3. Free Chromatin Preparation from Synchronized Lymphocyte Culture
Although free chromatm fibers may be obtained from different stages of the cell cycle by alkaline treatment, our unpublished studies show that chromatin fibers are most easily released from cells at the early Gl or late G2 phase. We reason that the nuclear envelopes are more fragile at these stages. To obtatn free chromatin from these stages,cell cycle synchronization by thyrmdme block is necessary. 1. Collect lymphocytes from 10 mL of heparmized blood and resuspend m 3-4 flasks with 20 mL of a-MEM (supplemented with PHA and 15% fetal calf serum) for 48-52 h m a COz incubator at 37°C 2 Add thymidine (0.3 mg/mL) to the culture and continue the mcubation for an additional 16 h. 3. Collect the cells by centrifugation Wash three times with warmed, serum-free medium (10 mL each), and resuspend m 20 mL of a-MEM. 4 Continue the culture for 10 h before harvest, and prepare the slides in the same manner as in Section 3 1 l., step 3. 3.1.4. Preparation of Free Chromatin Fibers from Uncultured Human Cord Blood
Since most of the cells in the human cord blood are arrested m the Go phase, near the Gl phase, they are excellent materials for free chromatin preparation, Good quality chromatin fibers may be obtained from these cells by a sample hypotonic shock; no drug treatment or alkaline buffer is required. As discussed above, the yield of free chromatm structures will decrease once the cells are transferred to RPMI 1640 and allowed to grow in culture. 1. Isolation of lymphocytes from cord blood The procedures are the same as described in Section 3.1.1., step 1. 2 Hypotomc treatment As the optimal condition varies depending on the indivrdual donor, the optimal condmon of the hypotonic treatment may be determined by controllmg the treatment time (10-120 mm) with 0 4% KC1 solution or by varying the KC1 concentration (0 l-OS%) with a 30-min treatment. a Divide 0.5 mL of isolated lymphocytes from 5-10 mL of blood equally into 5 tubes (15mL conical culture tubes) b. Add 4 mL of KC1 hypotonic solution (e g., 0.4% KCl) to each of the tubes; mix well. Incubate at 37’C. c. At 5, 10, 20, 40, and 60 min, add 0.5 mL of fixing solution (3:l methanol:acetic acid) to one of the tubes, mix well and collect the cells by centrifugation
Free Chromatin
Mapping
by FISH
117
d Prepare slides as described in Section 3 1.1.) step 3, except that the amount of time for fixing may be reduced to 5 min. Stain with Gremsa (3% solutron for 5 min), and check sample under the microscope (see Note 11) 3. Slide preparation and storage. same as in Section 3.1.1.) steps 3 and 4
3.2. In Situ Hybridization 3.2.1. Probe DNA Preparation 3.2.1.1.
and Labeling
DNA ISOLATION
1. Cosmid DNA is separatedfrom E. coli host DNA by using the Qiagen column (Qiagen, Inc.) according to the manufacturer’s recommendation (seeChapter 4) 2. YAC DNA is extracted along with total yeast DNA as described (17, see Chapter 4)
3.2.1.2.
PROBE LABELING
1 Biotinylated DNA probe is prepared by using the BRL BloNick kit (BRL). 1 pg of DNA is used per reaction. The size of the nick-translation products may be examined by agarosegel electrophoresls,successfullabeling usually gives fragments around 150-250 bp The reaction is performed at 15“C for 1 h for cosmid probes or 2 h for YAC probes 2. If a secondlabel is required, digoxigenin-dUTP may be used A .50-pL reaction is normally used to prepare 1 pg of probe DNA The cocktail contains 10 pL 5X dNTP, 5 pL of the 10X reaction buffer, DNA, and distilled water made to 45 JIL, and 5 p,L of BRL nick-translation enzyme solutron, which is the last ingredient to add. 3 Separatethe unmcorporated nucleotidesfrom the labeledprobe by using the Nick column (Pharmacia) 4. Add 60 pg of somcatedsalmonspermDNA to the labeledprobe along with 40 pL of 3M Na acetate and coprecipitate with the addrtion of 880 pL of cold ethanol Wash the pellet with 70% ethanol, air-dry, and resuspendin 20 l.tL of TE buffer.
3.2.2. Probe Prehybridization 1 For probes contammg dispersed repetitive DNA sequences(such as phage, cosmid, or YAC clones of genomic DNA), suppressionby prehybridlzation to total genomic DNA or Cot-l DNA is required Accordmgly, mix 20-50 ng of cosmid or phageDNA, or 200-250 ng of YAC DNA with 2 pg of Cot-l DNA (or total human DNA) in 13 p.L of hybridization buffer I After denaturatlon at 75°C for 5 min, incubate the mixture at 37’C for 15-30 min for probe prehybridization If total YAC DNA is usedasprobe, add 2 pg of yeast DNA to the prehybridization reaction. 2 No prehybridrzatlon is necessaryfor single-copy or a-satellite sequences.Heat 20-50 ng of probe DNA at 75’C for 5 mm m 15 pL of hybridization buffer II, and transfer to ice immediately.
3.2.3. Slide
Preparation
for Hybridization
1 Bake the free chromatm- (or metaphasechromosome-)containing slidesat 55’C for 2 h just before use
118
Heng
and Tsui
2. Treat the baked slides with RNase A (100 l,tg/mL m 2X SSC in a 25mL jar) at 37°C for 1 h; rinse once in 2X SSC; dehydrate by dipping in 70, 90, and 100% ethanol consecutively for 3 min each and then air-dry. 3 Briefly bake the slides at 55°C and then immerse them for 2 min in freshly prepared denaturatton solution preheated to 70°C. Several slides may be treated at the same time in a 25mL slide jar secured m a water bath. 4 Quickly transfer the slides mto a jar containing ice-cold 70% ethanol for 2 min Dehydrate the slides by going through 95 and 100% ethanol for 3 mm. Air-dry and hybridize immediately. 3.2.4. Hybridization 1. Transfer 15 uL of the probe solution to each slide. Cover the reaction with a 22 x 40 mm coverslip. Avoiding air bubbles, seal the edges with rubber cement to prevent evaporation. 2. Incubate the slides at 37°C in a moist chamber contaming absorbent paper soaked m water. For a-satellite (or other repetitive) probes, hybridize for 3-16 h For cosmid or YAC probes, the Incubation time should be 18-36 h. 3.2.5. Posthybridization Wash Different condltlons are used to wash the slides after hybridization, mg to the nature of the probes.
accord-
3.2.5.1. FOR COSMID AND YAC PROBE 1. Prepare three plastic ears filled with washing solution A, and 3 jars of 2X SSC prewarmed to 46’C. 2. Carefully remove the rubber cement from the slides by forceps. Dip the shde in 2X SSC and allow the covershps to float off. Agitate the shdes in the solution a few times. 3 Immerse the slides in the prewarmed washing solution A three times for 3 min each (agitating gently) and wash further m 2X SSC three times for 3 min each. 3.2.5.2. FOR OI-SATELLITE AND OTHER REPETITIVE DNA PROBES 1. Prewarm washing solution B to 43°C and 2X SSC at 37°C. 2. Remove rubber cement and coverslips 3 Gently agitate the slides in the prewarmed washing solution for 20 min. 4 Rinse the slides in prewarmed 2X SSC (at 37°C) three times for 3 min each 3.2.6. Detection
and Amplification
of Fluorescence
Signal
3.2.6.1. ONE-COLOR LABELING WITH SIGNAL AMPLIFICATION 1. Immerse the washed slides in 4X SSC, then m washing solution C for 3 mm each. 2 Blot excess liquid from the edges of the slides. 3. Quickly apply 30 u.L of blocking solution to each slide Place a plastic coverslip over the solutton, and incubate at room temperature for 5 mm 4. Gently peel off the plastic coverslip. 5. Apply 30 p,L of FITC-avidin to each slide. Cover the solution with a piece of new plastic coverslip. Incubate the slides at 37°C for 20 min in a humidified chamber
Free Chromatin
6. 7 8. 9 10 11. 12 13. 14 15.
Mapping
by FISH
119
with light-protected cover. (From this step onward, rt IS very important to keep the slides away from light ) Remove the covershps and rinse the slides m 4X SSC and washing solution C at room temperature three times for 3 min each Apply 30 ltL of blocking solution to each slide. Cover the solution with a plastic coverslip, and leave the slide at room temperature for 5 mm Add 30 pL of biotinylated goat antiavidin antibody to each slide. Replace the coverslip and incubate at 37’C for 20 min Remove the coverslip and transfer the slides consecutively into 4X SSC, washing solution C, three times for 3 min each Apply 30 l.tL of blocking solution to each slide. Place a plastic covershp over the solution and incubate at room temperature for 5 mm. Peel off the plastic coverslip Apply 30 pL of FITC-avidin to each slide Cover the solution by a piece of new plastic coverslip, and incubate the slides at 37’C for 20 min in a humidified chamber with light-protected cover. Remove the coverslips and rinse the slides in washing solution C, and then 2X SSC at room temperature for 3 mm each. DAPI-staining. Immerse the slides in a 0 2 pg/mL DAPI m 2X SSC at room temperature for 5 min and rinse them in 2X SSC three times for 1 mm each Overlay the sample with 10 l.rL of antrfade solution and cover with a 22 x 40 mm coverslip, gently press the coverslip to exclude excessive hquld. PI counterstaming of the free chromatin may be applied before this step or used together with the antifade solution by mixing them before loading.
3.2.6.2. ONE-COLOR LABELING WITHOUT SIGNAL AMPLIFICATION 1 Immerse the washed slides in 4X SSC, then in washing solution C for 3 min each. 2. Blot excess liquid from the edges of the slides. 3. Quickly apply 30 l.tL of blocking solution to each slide. Place a plastic coverslip over the solution and incubate at room temperature for 5 min 4. Gently peel off the plastic coverslip. 5. Apply 30 pL of FITC-avidin to each slide Cover the solution with a new plastic coverslrp. Incubate the shdes at 37°C for 20 mm in a humidified chamber with light-protected cover. (From this step onward, it is very important to keep the slides away from light ) 6. Remove the coverslrps and rinse the slides in 4X SSC and washing solution C at room temperature, three times for 3 mm each. 7. DAPI-stammg: Immerse the slides in a 0 2 pg/mL DAPI m 2X SSC at room temperature for 5 min and rinse them in 2X SSC, three times for 1 min each. 8. Overlay the sample with 10 pL of antifade solution and cover with a 22 x 40 mm coverslip; gently press the coverslip to exclude excessive liquid. PI counterstaming of the free chromatm may be applied before this step. 3.2.6.3. TWO-COLOR LABELING WITHOUT SIGNAL AMPLIFICATION 1 Follow all the steps as m Section 3 2.6.2., except that in step 5 add antr-drgoxigenin-rhodomin fragments together with FITC-avidin.
120
Heng and Tsui
2. Combine 100 PL of antidigoxigenm-rhodamin fragments, 10 p.L of FITC-avidin, and 890 j.tL of detectton buffer 3 Apply 30 pL of the above solution to each slide Incubate the slides at 37’C for 20 min with light protection. Wash them m washing solutron C and 2X SSC at room temperature. Mount slides as described m Section 3.2 6.2., step 8, except no proprdium todrde (PI) counterstainmg is used. 3.3. Microscopy and Photography The slides may be examined immediately after the addition of the antrfade solution. Frrst identify free chromatin structures under the microscope with the DAPI filter. Switch to the FITC filter to localize the FISH signals. To avoid signal fading, these steps should proceed quickly. For the Kodak Ektachrome P800/1600 color film, push the exposure to 3200 ASA (exposure times: < 1 s for DAPI fluorescence image, 4-7 s for PI and/or FITC, 30-100 s for rhodamm/ FITC or Texas red/FITC). Slightly longer exposure time is requrred for the Kodak 400 ASA black-and-white film.
4. Notes 1. EtBr, BrdU, and H-33258 are light-sensrtrve reagents; they and m-AMSA are toxic reagents. Careful handling 1s needed. 2. Three different protocols may be used to prepare free chromatm from late G2 or early Gl (Go) cells. The high pH buffer is recommended for obtaining free chromatm from cultured tibroblasts lines, while the Go phase hypotonic treatment may be used for the lymphocytes. The drug treatment 1sthe original method with which increased frequency of free chromatin was first observed, although the experimental steps are tedious, different drugs may be used to delineate the chromosome condensation process 3. Human cord blood 1s preferred as the source of lymphocytes because it is easier to obtain good free chromatm preparations with this material than with peripheral blood In addition, a large amount of cells may be obtained from the same individual for both optimization and test experiments. It is important that the cells should not be cultured longer than the recommended duration; the yield of free chromatin would decrease appreciably if the culture is allowed to continue for 68-72 h, which is the amount of ttme normally recommended for metaphase chromosome preparations. Our data (unpublished) show that the longer the cells are grown in culture, the fewer chromatm fibers can be obtained, regardless of the subsequent drug or other treatment regimes. 4 The concentration of drug required to achieve the desired results varies among different blood samples. The optrmal concentration may be titrated with 5, 10, or 20 l.tg/mL for portions of the culture at around 44-46 h of mcubatron. After determining the best results by examinatron of the slides (see text), the optrmrzed concentration is applied to the remaining cell culture at 48-50 h of incubation 5. For titration of optimal drug concentratron, the procedure is the same as described above (steps a-f), but the amount of time for methanol/acetic acrd fixing may be reduced to 5 min. 6 While free chromatins are useful for ordering DNA and gene segments, conventional metaphase chromosome spreads may be prepared on the same slide
Free Chromatin
7.
8
9.
10.
11
Mapping
by FISH
for use as controls in FISH analysis. The procedures for cell culture and chromosome preparation for the latter purpose are simrlar to that described above except that the cells are treated with colcemid (0 1 pg/mL) for 2 h at 46 h postmcubatron One drop of free chromatin suspensron and 1 drop of chromosome suspension should fit on the different regions of the same slide. The two samples may be prepared at drfferent times, the suspension of free chromatin or chromosomes may be kept at 4°C for as long as 2 d before the other sample 1s ready. The hybridization pattern is often easier to interpret with free chromatins prepared from the Gl phase before DNA rephcation than those from the G2 phase, after DNA replication If nonfibroblastord cell types are used, cell cycle blockers may be used to synchronize the cell culture before harvest (see text). Since prolonged treatment with trypsm may overly sensitize the nuclear membrane (especially under shghtly alkalme pH), this step should be momtored carefully. Special attentron 1srequired for some cells that are particularly sensrtrve. It 1seasy to tell rf the cells are overtreated with trypsin, because the solution would then become very stocky upon additron of the alkaline buffer. In addition to the length of treatment, the pH of the buffer (10-l 1 S) and the concentration of KC1 (0 4-4%) also affect the yreld of free chromatin. In general, high pH promotes, and KC1 retards, lysis. A higher concentration of KCl, which however, requires a longer time of hypotomc treatment, and will produce longer free chromatins The conditrons can be varred systematrcally to find the optrmal combmation for a given cell line Whtle high percentage of free chromatin structures are desirable for slide preparation and FISH analysis, overtreatment will destroy the 300-A structure and lead to production of naked DNA strands, whrch are extremely drfficult to handle in subsequent steps. To obtain the best results, one should try to fix the chromatin fibers quickly before they are aggregated with each other after released from nuclei. The use of a small vol of alkaline buffer and a large vol of the prefixmg solution is a good way to avoid aggregatron of free chromatin fibers, High-pH solution alone (without buffer) may also be used to produce free chromatm but the timmg is more drfficult to control Once the optimal condrtron IS obtamed, repeat the steps for large-scale shde preparation. Metaphase chromosome spreads are recommended as FISH controls, as discussed above To obtain metaphase chromosomes from actrvely growing fibroblastoid cells, colcemid treatment (0.1 pg/mL, 30-60 mm) 1s applied to a subconfluent culture seeded 24 hr prior to harvest. The procedures used for microscope shde preparation and storage are the same as described above (see Note 6). Process each sample immediately, do not wart for the other samples that are still under the hypotoruc treatment The optimal condition is then used for large-scale slide preparation. 0.3-O 5 mL of isolated lymphocytes may be treated in the same tube; more tubes should be used for larger numbers of cells to avoid aggregation of free chromatins
Acknowledgments We thank P. Moens, B. Spyropoulos, and J. Squire for valuable dtscussrons. We also thank Xrao-Mel Sht for her excellent technical assistance. The re-
122
Heng
and Tsui
search was supported by grants from the Howard Hughes Medical Institute (International Scientist Award to L.-C. Tsui) and the Medical Research Council of Canada through a Studentship Award to H. H. Q. Heng, and the Canadian Genetic Disease Network to L.-C. Tsui. References 1 Schwarts, D C and Cantor, C. R. (1984) Separation of yeast chromosome-sized DNAs by pulsed field gradient gel electrophoresis Cell 37,67-75 2 Burke, D. T , Cark,Cl.F , andOlson,M. V (1987)Clonmgof largesegments of DNA mto yeastby meansof artrfrcralchromosome vectors Scrence236, 806-812 3 Trask, B. J. (1991) Fluorescencem srtu hybridization applicationsin cytogeneticsand genemappingTrends Genet 7,149-154 4 Lrchter, P.,Boyle, A., Cremer,T., andWard, D (1991)Analystsof geneandchromosome by nonisotopicin situ hybridization.Genet Anal Techn Appl 8,24-35 5 Heng,H H. Q. andTsui, L -C (1993)Modesof DAPI bandmgandsimultaneous in situ hybrtdtzatton Chromosoma 102,325-332 6 Heng, H H Q , Shi, X -M , and Tsui, L-C (1993) Fluorescencein situ hybrtdization mappmgof the cystic fibrosis transmembrane conductanceregulator (CFI’R) gene to 7q313 Cytogenet Cell Genet 62, 108,109 7 Lrchter, P , Tang, C C , Gall, K , Hermanson,G., Evans,G , Housman,D., andWard, D (1990) High-resolutronmappingof humanchromosome11by m situ hybrtdtzatton wrth cosmidclones Science 247,64-69 8 Moens,P and Pearlman,R E (1990) In srtu DNA mappmgwrth surface-spread mouse pachytenechromosomesCytogenet Cell Genet 53,219,220 9. Ferguson-Smrth, M. A (1991)Invtted edttorral.putting the genettcsback mto cytogenetits Am J Hum Genet 48,179-182 10 Trask, B., Pinkel, D., and Engh, G. V. D (1989) The proxtmity of DNA sequences in interphasecell nuclei is correlatedto genomtcdistanceand permitsorderingof cosmids spanning250ktlobasepairs Genomtcs 5,710-717 11. Brandriff, B., Gordon, L., andTrask, B. (1991) A new systemfor high-resolutionDNA sequencemappingin interphasepronucler.Genomics 10,75-82 12 Heng,H. H. Q,, Square,J., and Tsur,L.-C. (1992)High resoluttonmappingof mammalian genesby m sztu hybrrdrzatronto free chromatin.Proc Natl. Acad Scl USA 89, 95099513. 13 Heng,H H Q andChen,W Y (1985)The studyof the chromatinandthe chromosome structurefor Bufo gargarlzans by the light mrcroscope..I Stchuan Unrv. Natural Science 2,105-108
14 Heng,H H Q andChen,W Y (1986)Studieson the structureof the chromosome andtts formation,I A new method.Nucleus 29, 5-8 15 Heng, H H Q , Chen, W Y , and Wang, Y C (1988) Effects of pingyanymycm on chromosomes. a possiblestructuralbastsfor chromosome aberrationMutation Res. 199, 199-205
Raymond,Y. (1990)Differential effect of pH on solubrhzatronof nuclearlaminsA/C and B Cell &ol Int Rep 14, 165-171 17 Scherer, S. and Tsut, L.-C (1991) Clomng and analysrsof large DNA molecules,m Advanced Technrques w Chromosome Research (Adolph, K , ed ), Marcel Dekker, New York, pp 35-72 16
CHAPTER 11
Use of DNA-Halo Preparations for High-Resolution DNA In Situ Hybridization Anton
K: Raap
and Joop Wiegant
1. Introduction The past 10 years have witnessed an increasing application of in situ hybridization techniques in biomedical research. This is mainly a result of the development of nonradioisotopic nucleic acid hybridization detection formats. Such methods allow much better exploitation of the spatial resolution provided by light microscopy than radioisotopic detection formats such as microautoradiography (I,2). Also the spectral resolution of light microscopy can be used to advantage with such methods, because they readily enable the simultaneous detection of multiple nucleic acid sequence targets on the basis of dtfferent colors (3-5). In situ hybridization techniques are now accepted as powerful research tools in molecular cell biology and genetics (for reviews see refs. 6-8). In this chapter we address high-resolution in situ hybridization techniques for DNA mapping purposes. The resolutions that can be obtamed by in situ hybridization to (pro)metaphase and interphase nuclei are first discussed. This is followed by a detailed description of the protocols for producing so-called DNA-halo preparations from primary human fibroblasts. In such preparations, the DNA is expelled from the nuclei in large loops consisting of naked DNA (9). Multicolor in situ hybridization to such halo preparations permits rapid DNA ordering and mapping in the lo-200 kb range (10). 1.1. Chromatin Condensation and Resolution of In Situ Hybridization At the level of the isolated DNA double helix, the spatial distance between DNA sequencesmeasured, for example, in micrometers @m), is linearly related to their physical DNA distance (genomic distance) measured, for example, in kilobasepairs (kb). In genetically important biological structures such as mammalian chromosomes at metaphase or interphase, the DNA is present in chromatin of various degrees of condensation. The higher the degree of chromatm packing, the lower the DNA resolution of in situ hybridization (11). For in situ hybridization to (pro)metaphase chromosomes, the relatively high level of From E&ted
Methods m Molecular Brology, Vol. 33 In SIIU Hybnduatron Protocols by K t-l A Choo Copynght 0 1994 Humana Press Inc , Totowa, NJ
123
Raap
124
and Wiegant
chromatm condensation limits the resolution at the lower end of the range to about 3 megabaseparrs (Mb) (i.e., the amount of DNA present in the smallest band that can be resolved by light microscopy), while at the upper end there are no technical and only biological limitations. Hence, with in situ hybrldlzation to (pro)metaphase chromosomes a given DNA clone can be assigned to a chromosomal band or sub-band. Combined in situ hybrldizatlon and banding procedures are available (12-14). For obtaining higher DNA resolutions by zn sztu hybndlzatlon, Lawrence and coworkers (2) have proposed to use interphase nuclei, which by their more relaxed chromatin condensation state, provide dramatically improved resolution (II). Extensive distance measurements between pairs of signals derived from cosmlds isolated from a number of genomic regions have shown that in the 50 kb-1 Mb range there is a lmear relation between the DNA distance and the measured spatial distance of the in situ hybridization signals (1516). Recently such experimental data have been given a theoretical basis by assuming a random walk model for DNA m interphase nuclei (I 7). Although exceptions to the rule of the linear relation between spatial and genomic distance in mterphase have been noted (Z??),Interphase mapping m combination with metaphase mappmg technique is very well suited for rapldly constructing chromosomal maps of lOO-kb resolution (17). To achieve higher resolutions by in situ hybridization, the use of a blological object possessmg a higher degree of chromatm decondensatlon has been proposed, namely human pronuclei produced by human sperm-hamster egg fusions (19). However, this IS impractical because the methodology is labonous, not widely available, and reqmres specific expertise. Furthermore, only few pronuclei are produced per fusion experiment. To circumvent this problem we have used a nuclear extraction technique that, by detergent- and high saltextractions and a DNA relaxation treatment, results m chromatin that IS decondensed to the level of the Watson-Crick DNA double helix (9). In sztu hybridization to such DNA-halo preparations may contribute to DNA mapping efforts at relatively short range (lo-200 kb) as well as to the characterization of breakpoints, mlcrodeletions, and small duplications. 2. Materials 2.1. Preparation of DNA
Halos
1 Cultured human foreskin fibroblasts 2. Microscope object slides (sterilized) 3. Dulbecco’s medium supplemented with fetal calf serum, pemclllm, streptomycin, and glutamine. 4. PBS: 8 g NaCl, 0 29 g KC& 1 449 g Na2HP04, 0 249 g KH,PO, per liter. 5. Extraction buffer 1.0 5% Nonidet NP-40, 10 mM MgCI,, 0 5 mM CaCl,, 25 mM Tris-HCI, pH 8.0, 1 rruV phenylmethylsulphonyl fluoride 6 Extraction buffer 2: 2M NaCl, 0.2 mA4 MgC12, 25 mA4 Tris-HCl, pH 8 0
High-Resolution 7. 8. 9. 10. 11. 12
125
DNA-ISH
Wash buffer 1’ 0.2M NaCl, 0 2 mA4 MgCl,, 25 mM Tris-HCl, pH 8.0 Wash buffer 2: 0.2 mM MgC12, 25 mM Tris-HCl, pH 8.0 Propidium iodide. 50-mL tubes. Glass plate on crunched me. UV lamp, 254 nm.
2.2. In Situ Hybridization 1. 2. 3. 4. 5. 6
7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17 18. 19. 20. 21.
Probe DNA DNA polymerase 1 from E. coEi (Promega, Madison, WI). DNase 1 (Boehringer-Mannheim, Mannheim, Germany). 10X nick-translation buffer: 0.5M Tris-HCl, 50 mM MgClz, 0.5 mg/mL BSA (nuclease free), pH 7.8 dNTPs (Boehringer). Prepare an unlabeled stock nucleotide mixture of 0.5 mM dATP, dGTP, dCTP, 0.1 mM dTTP. Hapten- or fluorochrome-modified dUTP Biotin-, digoxigenin-, fluorescem-, rhodamine-, and coumarin-modified dUTP are from Amersham (Arlmgton Heights, IL) or Boehringer. The present protocol focuses on biotin and drgoxigenin. Sephadex G-50. Deionized formamide for hybridization solutions. Formamide for posthybridization washings. 20x ssc. Biotin detection reagents* avidm-Cy3, biotinylated antiavidin (Vector, Laboratories, Burlingame, CA). Digoxigenm detection reagents: mouse antrdigoxigenin (Boehringer), rabbit antimouse Ig-FITC (Sigma, St. Louis, MO), goat anttrabbit-FITC (Sigma). Nonfat dry milk (Carnation). Herring sperm DNA, fragmented. Yeast RNA. Dextran sulfate. Human Cot-l DNA (Life Technologies, Gaithersburg, MD). TNT buffer: O.lM Trts-HCl, pH 7.4, 0.15M NaCl, 0.05% Tween-20. Mounting medium with antifading reagent. Originally we used diaza-bmyclooctane as antifadmg reagent, but recently better results have been obtained with Vectashreld from Vector Laboratories. Epifluorescence microscope equipped with high-transmisston dual bandpass filter sets 3M color slide film, 640 ASA.
3.1. Preparation
3. Methods of DNA Halos
(see Note 1)
1. Seed fibroblasts on the microscope object slides at a density of about 2500 cells/ mm2 and culture in Dulbecco’s medium at 37°C and 5% C02. The density of cells may be adapted to the investigator’s need. 2. Perform steps 3-6 at O’C. 3. Wash twice with PBS.
Raap
126
and Wiegant
4. Dip 45 s m extraction buffer 1 5. Dip 45 s in extraction buffer 2 6 Dip 45 s again in extr,tctlon buffer 2, which now contains 40 pg/mL propldmm iodide 7. Place the (wet) slides on an ice-cold glass plate and irradiate with 254-nm UV light (7000 pW/cm2) for 7 min. 8 Wash 45 s each with wash buffer 1, wash buffer 2, and twice with HZ0 at O’C. 9. Allow to air-dry at room temperature. 3.2. Labeling of Probe by Nick 1 Prepare the followmg labeling mixture at 0°C Filtered distilled water Nick-translation buffer (10X) DTT (0 1M) Nucleotide mix (0 5 mM dA,dG,dC; 0 1 mMdT) Btotin- 1 l-dUTP (1 mM) Probe DNA (1 g/L) DNA polymerase I (10 U/L) DNase I (1: 1000 of 1-mg/mL solution)
Translation
26 pL 5 PL 5PL 4PL w 1w
2
2PL
5w
For labeling with dlgoxigenm, replace the blotm-11-dUTP with 2 pL of dlgoxlgenin- 1 l-dUTP. 2. Incubate the labelmg mixture for 2 h m a 15°C water bath. 3 Add 5 pL 0.5M EDTA (pH 8) to the labeling mixture and put on ice. 4 Purify the labeled probe by gel filtration. Use for this purpose a Pasteur pipet (150 mm) filled with TE-equilibrated Sephadex G50 and previously flushed with 50 pg herring sperm DNA and 50 pg yeast RNA.
The remainder of this protocol is written for complex DNA probes that conelements and therefore require a preannealing step with unlabeled total genomic DNA or its Cot-l fraction to prevent the repeat sequences from participation in the in situ hybridization reactlon (20,21).
tain repetitive
1 2 3 4 5. 6.
7.
3.3. Preparation of Hybridization Solution Mix 50 p.g of herring sperm DNA, 50 pg of yeast RNA, and a 50-fold excess human COT1 DNA; Add 0 1 vol 3h4 sodmm acetate (pH 5 5), mix well Add 2.5 vol of 100% ethanol (-20”(Z), mix well. Keep for 30 mm on ice and spin down the DNA at 12,000g for 30 mm at 4°C Remove supernatant. Dissolve the pellet m 50% deiomzed formamide, 2X SSC, 50 mM sodium phosphate, 10% dextran sulfate, pH 7, preheated to 37*C, at a probe concentration of 10 ng/uL. Take care to fully dissolve the DNA, e.g., by mcubation for 15 mm at 37°C. This will be referred to as the probe stock solution Take the required amount of labeled probe DNA from the stock solution and adjust the volume to the desued concentratton of probe. For cosmid hybrid-
High-Resolution
DNA-ISH
127
ization we use 20 ng per probe per target area (10 pL hybridizatron mixture per 18 x 18 mm*). 8. Denature the probe DNA for 5 min at 75°C. 9 Put on me for 1 min, then spin briefly. 10. Preanneal for 15-30 min at 37°C.
3.4. Denaturation and In Situ Hybridization of the DNA-Halo Preparations 1, Apply 120 l.tL of 70% deionized formamide, 2X SSC, 50 mM sodium phosphate, pH 7, solution on the slide. 2. Cover the solution with a 24 x 60 mm* coverslip 3. Denature the DNA 2-3 mm on an 80°C hot plate 4. Remove the coverslip. 5 Place the slide drrectly in 70% ethanol (-20°C) Wash two times, 5 min each 6. Dehydrate the shde through a 90 and 100% ethanol serves, each for 5 mm. 7. Place the slide on a plate of 37”C, and leave it there to dry. 8. Apply 10 j.rL of the preannealed probe mrxture per target area on the denatured shde 9. Cover the probe mixture with a 18 x 18 mm2 coverslip. 10. Hybridize overnight at 37°C m a moist chamber (motstening medium. 50% formamide, 2X SSC, pH 7)
3.5. Posthybridization
Washings
1. Prewarm a 50% formamide/2X SSC, pH 7 solution, to 45°C. 2. Prewarm a 0.1X SSC solutton to 60°C 3. Immerse the slides in the formamide solution and remove the covershp by gently shaking 4. Wash the slide three ttmes for 5 min each in the formamide solution at 45’C 5. Wash the slide additionally three ttmes for 5 min each in 0.1X SSC at 60°C.
3.6. Immunofluorescen
t Detection
The followmg protocol permits simultaneous detection of biotm- and dlgoxigenin-labeled probes. It uses fluorescein as a green and Cy3 as a red fluorescent reporter molecule, respectively. 1. Wash brrefly with 4X SSC, 0 05% Tween-20 2. Block for 30 min at room temperature with 4X SSC, 5% nonfat dry milk, and wash briefly to remove coverslip 3 Incubate for 30 min with avidm-Cy3 (2 pg/mL) m 4X SSC, 0.05% Tween-20 at room temperature. 4. Wash three times for 5 min each with 4X SSC, 0.05% Tween-20, and once for another 5 min each with TNT buffer at room temperature for 30 min. 5. Incubate with biotmylated goat antravidin (5 pg/mL) and mouse antrdigoxrgenm (0.5 pg/mL) m TNT buffer at 37’C. 6. Wash three times for 5 mm with TNT buffer at room temperature. 7 Incubate with avidin-Cy3 (2 ttg/mL) and rabbit antimouse-FITC (1: 100) m TNT buffer at 37°C
Raap 8. 9 10. 11. 12. 13
and Wiegant
Wash three times for 5 mm each wtth TNT buffer at room temperature. Incubate with goat antirabbit-FITC (1.100) in TNT buffer at 37’C Wash three times for 5 min each with TNT buffer at room temperature. Dehydrate with a graded series of 70, 90, and 100% ethanol. Air-dry and embed in Vectashleld mounting medium. Inspect and photograph results with a modern eptfluorescence microscope equipped with a dual bandpass filter set. For the FITC-Cy3 fluorescent dye combination we have used the 51004 filter set from Chromatechnology (Brattleboro, VT) Use high numertcal aperture lenses, e g., 63x, N.A. 1 3 or 100x, N A. 1.3.
(See Notes 2-4 for discussrons on resolutton, the DNA-halo technique.)
limitation,
and application
of
4. Notes 1 Imperfect DNA-halo preparations are required for DNA mapping. Possibly as a consequence of the an-drying process, a large fraction of the nuclear matrix attachment sites are disrupted. For >90% of the cells, this leads to arrays of large DNA loops which are linear or near-to-linear for the larger part. Loop lengths of 200 pm and more are not uncommon. It IS this reproducible artifact that 1s used for ordering purposes. 2. Resolutton and efficiency. Thus far, most of our experience with in situ hybridizatton to DNA-halo preparations has been obtained with alphoid and cosmid DNA probes (Figs. 1 and 2, respecttvely). Cosmrd signals are seen as beads-ona-string, in which lo-15 beads can be seen on a string of about 10 pm m length for the fully decondensed chromatm. When two cosmids are physically separated more than 200 kb apart, it may become difficult to spatially relate two differently labeled cosmids to each other. Hence the upper limit of the resolution is about 200 kb. In the overlappmg common regton (e.g., lo-15 kb) of two differently labeled cosmlds, the red and green signals can be seen intermmgled, whrle the ends of the hybridized string show only red or green signals. Hence, at the lower end, the resolution range is about 10 kb. Recent experiments with a set of unique plasmlds isolated from a cosmid have indicated that the lower limrt can be as good as 1 kb Cosmids that have proven to give signals in metaphase- or interphase cells generally work well with halo preparations. In more than 90% of the cells, beadson-a-string-like signals can be obtained Gaps, overlaps, or probe order are usually apparent after screenmg about 10 cells. 3. Ordering and mapping For determining DNA order and spacing, the approaches for interphase mapping can be used in principle. These mvolve assessing distances between hybridization signals derived from pairs of DNA, or brcolor in situ hybridizations. Accurate determination of spacing by distance measurement can only be done when tt IS beyond doubt that the DNA separating the two signals is linear. When there is doubt about the spatial relationship between two signals, the problem may be solved by hybridizing the intervening DNA in another color using a yeast artificial chromosome (YAC) spanning the regton of interest. As this high-resolution in situ hybridization technique is relatively new, extensive quantitative data are lacking. Hence, a statement about the accuracy of mapping cannot be made at this time
Figs. 1 and 2 (see color plate number 1 after p. 172). (Fig. 1, left) In situ hybridization to DNA-halo preparations of human fibroblasts using biotinylated alphoid DNA specific for chromosome 17. Note the stretched-out signals, which cover up to several megabases of the tandemly repeated alphoid DNA on each chromosome 17. (Fig. 2, right) Redandgreenbicolor in situ hybridization with two cosmidDNA sequences, which havea gapof about20 kb. Note the beads-on-a-string-like signals,andthe labelingof both homologs. 4. Applications. We conclude that the resolution range provided by in situ hybridization to DNA-halo preparations (l&200 kb) complements that of interphase mapping (100 kb-1 Mb). Therefore, the technique may find application in shortrange DNA mapping and gap sizing as well as in the characterization of breakpoints, microdeletions, and small duplications.
Acknowledgments The authors wish to thank Wouter Kalle and Leon Mullenders for help and stimulating discussion about the preparation of DNA-halos; Jan Hoovers, Ed Schuuring, and Hans Dauwerse for providing us with probes; and Gert Jan van Ommen for his continuous interest and stimulating discussions. This work was supported in part by NWO-grants no. 534-060 and PGS 90-129.90. References 1. Landegent,J. E., Jansenin deWal, N., Van Ommen,G. J. B., Baas,F., de Vijlder, J. J. M., Van Duijn, P., andVan der Ploeg,M. (1985)Chromosomal localizationof a uniquegene by non-autoradiographic in situ hybridization. Nature 317, 175-177. 2. Lawrence,J. B., Villnave, C. A., andSinger,R. H. (1988)Interphasechromatinandchromosomegenemappingby fluorescencedetectionof in situ hybridization revealsthe presenceandorientationof two closely linked copiesof EBV in a humanlymphoblastoidcell line. Cell 52,51-61. 3. Dauwerse,J. G., Wiegant, J., Raap,A. K., Breuning,M. H., and van Ommen,G. J. B. (1992) Multiple colors by fluorescencein situ hybridization using ratio-labeledDNA probescreatea molecularkaryotype. Hum.Mol. Genet.1,593-598. 4. Nederlof, P. M., van der Flier, S., Wiegant, J., Raap,A. K., Tanke, H. J., Ploem,J. S., andVan der Ploeg,M. (1990)Multiple fluorescencein situ hybridization. Cytometry 11, 126-131. 5. Ried, T., Baldini, A., Rand,T., and Ward, D. C. (1992) Simultaneousvisualization of sevendifferent DNA probesby in situ hybridization usingcombinatorialfluorescence and digital imaging microscopy.Proc. Natl. Acad. Sci. USA 89, 1388-1392.
Raap
and Wiegant
6. Ltchter, P., Boyle, A. L., Cremer, T , and Ward, D. C. (1991) Analysts of genes and chromosomes by non-isotoptc m situ hybndrzation. Genet Anal. Techn. Appl 8,24-35. 7 McNeil, .I A., Johnson,C. V , Carter, K C , Singer,R. H., and Lawrence,J B (1991) LocahzmgDNA andRNA within nucletandchromosomes by fluorescencezn sztu hybrtdizatton. Genet Anal. Techn. Appl 8, 41-58 8. Raap,A. K , Nederlof,P M., Dirks, R. W , Wiegant, J C A. G , andVan derPloeg, M (1990)Useof haptenizednucleicacid probesin fluorescentzn sztuhybridizatton, m In Sztu Hybridizatzon: Applzcatzon to Developmental Biology and Medzcine (Harris,N andWillrams,D G., eds), CambridgeUmversrtyPress,Cambridge,MA, pp 33-41 9 Vogelstein,B., Pardoll,D. M , andCoffey, D. S.(1980)Supercooled loopsandeucaryotrc DNA replication Cell 22,79-85 10. Wtegant, J., Kalle, W , Mullenders,L , Brookes,S , Hoovers, J M N., Dauwerse, J G , Van Ommen,G. J. B , andRaap,A K. (1992)High-resoluttonin sztuhybridization using DNA halopreparationsHum. Mol Genet 1,587-591 11 Lawrence,J. B., Singer,R H , andMcNeil, J. A. (1990)Interphaseandmetaphase resolution of drfferent distancesw:thm the humandystrophingene Science249,928-931 12 Chertf, D , Juher,D , Delattre,O., Derre,J , Lathrop,G. M , andBerger,R (1990)Stmultaneouslocalizattonof cosmidsandchromosome R-bandingby fluorescencemicroscopy apphcattonto regtonalmappmgof chromosome 11 Proc Natl. Acad Set. USA 87,66396643 13 Takahasht,E , Hart, T , O’Connell,P , Leppert,M , andWhite, R. (1990)R-bandingand nonisotoplczn sztu hybrtdrzatton preciselocahzattonof the humantype II collagengene (Col2Al) Hum. Genet. 86, 14-16. 14 Wregant,J , GalJart,N., Raap,A. K., andd’Azzo, A. (1991)The geneencodinghuman protective proteinis on chromosome 20 Genomzcs 10,345-349 15. Trask, B., Pmkel, D , andVan denEngh,G (1989)The proximity of DNA sequences m interphasenucleiIScorrelatedto genomicdistanceandpermitsorderingof cosmidsspannmg250 kilobasepairs Genomics $710-717 16 Trask, B J , Massa,H , Kenwrick, S , andGitschier,J (1991)Mappingof humanchromosomeXq28 by 2-colourfluorescenceznsztuhybridizationof DNA sequences to interphase cell nuclei Am. J Hum. Genet 48, l-15 17 Van Den Engh,G , Sachs,R , andTrask,B J (1992)Estimatmggenomrcdistancefrom DNA sequence locationm cell nucleiby a randomwalk model Sczence 257,1410-1412 18 Den Dunnen,J. T , Grootscholten,P M , Dauwerse,J G , Walker, A P , Monaco, A P , Butler, R., Anand, R , Coffey, A J , Bentley, D R , Steensman, H Y , andVan Ommen, G. J. B (1992) Reconstructtonof the 2. 4 Mb humanDMD-gene by homologousYAC recombinatton.Hum. Mol. Genet. 1, 19-28 19 Brandrtff, B., Gordon, L , andTrask, B. (1991)A new systemfor high-resolutionDNA sequencemappingin interphasepronuclet Genomics 10,75-82. 20. Landegent,J E , Jansenm de Wal, N., Drrks, R. W , Baas,F , and van der Ploeg, M (1987)Useof wholecosmidclonedgenomrcsequences for chromosomallocalizattonby non-radioactivem situ hybrtdtzation.Hum Genet 77, 366-370 21. Ltchter, P , Tang,C C , Call, K , Hermanson, G., Evans,G , Housman,D , andWard, D C (1990) High-resolutionmappingof humanchromosome11 by cn sztu hybrtdtzatton with cosmid probes Sczence 247, 64-69
CHAPTER
12
In Situ Hybridization of Meiotic Prophase Chromosomes Barbara
Spyropoulos
and Peter
B. ikioens
1. Introduction In preparations of highly condensed metaphase chromosomes, it is often difficult to resolve in situ hybridization signals of probes to nearby regions. This 1s in part, a result of traditional fixation procedures that use alcohol, acetic acid, and/or relatively strong ionic conditions, all of which can cause chromosome condensation. The limit of resolution may be improved by using free chromatin or DNA-halo preparations as described m Chapters 10 and 11 of this volume. An alternative method of detecting proximal DNA sequences is to use whole-mount, surface spread meiotic prophase chromosomes (I,2), which have lesscondensed chromatin and a well defined axial core that is much longer than that of a metaphase chromosome. We have tested this system using two probes (3) agamst low-copy repeats, 5.5 map units apart on the X chromosome (4) as shown in Fig. 1, On metaphase chromosomes, these signals were close together and often overlapped. However, a distance of several micrometers separated the signals on pachytene chromosomes. This type of mapping is useful provided one keeps in mind that the chromatin is arranged in loops around a protein core, the synaptonemal complex (SC) (Fig. 2) (51, and that these loops are of considerable size relative to those of the metaphase chromosome. Thus, a sequence at the top of a 5+m loop could appear some distance from the SC loop attachment point, depending on how the loop settles during chromosome preparation. Therefore, the size of the loop limits the resolution of the probes a few pm apart. However, if the probes are very close together (a few megabases), the decondensed chromatin permits resolving signals from probes to adjacent loci or to cosmtd probes of different regions within the same gene. The loop arrangement can be further used to advantage since it is often possible to detect signals for each of the four chromatids, thereby allowing one to study the relative positions of the chromatids during chromosome pairing, recombination, and segregation. In addition, probes sometimes produce clusters rather than single signals, indicating some chromatm arrangement that may not have been previously suspected. From Edlted
Methods m Molecular Bmlogy, Vo/ 33 In SW Hybrrdrzafron Protocols by K H A Choo Copynght 8 1994 Humana Press Inc , Totowa, NJ
132
Spyropoulos
and Moens
Fig. 1. In situ hybridization of two probes against low-copy repeats. Probes 68-36 (68) and 70-38 (70) are located 5.5 map units apart on the X chromosome. A minor satellite probe highlights the centromere (C). The core of the X chromosome (X) appears as a dark line against a light background of chromatin loops. The scale bar represents 5 urn.
Fig. 2. The chromatin of a meiotic chromosome is arranged as a series of loops (L) around a protein core, the synaptonemal complex (SC). Each species has loops of a specific size. The scale bar represents 5 pm.
The spreading technique presented here was originally developed by Counce and Meyer (1) and later modified by Dresser and Moses (2). The in situ hybridization uses standard techniques. A similar description of these methods has previously been reported (6).
FISH with Meiotic Prophase Chromosomes
133
2. Materials 1. 2. 3 4 5 6 7 8. 9.
10
11.
2.1. Surface-Spreading Testicular Cells Drssectmg tray; sctssors; fine forceps (x2). 50-mL Beaker; dental wax; single edge razor; 15mL centrifuge tubes (x2); bench top centrifuge, Parafilm. Styrofoam container for ice-water bath; lo-mL Coplm Jars (x5) Coverslips, slide holders (x2); diamond pencil for marking coverslips (see Note 1). lo-pL pipetor and tips; wide-bore plastic transfer pipet. Phenol red indicator for monitoring pH of solutions 0.5% phenol red in distilled HzO. Filter. Store at room temperature. Lasts indefinitely. (Alkaline pH gives purple-red color, whereas acidic pH produces yellow color ) 0.05M Borate buffer stock solution: 1.9 1% (w/v) sodium borate in distilled H,O, pH to 9.2 with 0 5N NaOH Prepare a working solution of O.OlM by diluting stock 1:4 with distilled H20. Minimum Essential Medium (MEM)* This can be made from powder, 10X concentrate, or can be purchased ready-to-use from supplier (e.g , Gibco-BRL, Gaithersburg, MD) Paraformaldehyde solution* Mix 10 pL 0.5N NaOH, 100 mL of distilled H20, 30 pL phenol red indicator Add 1 g of paraformaldehyde (BDH, Poole, UK, JB EM, Montreal, Canada) and dissolve at 55’C on a hot plate in a fume hood Shut off the heat and place the Erlenmeyer flask into a contamer of cold water. Return it to the hot plate and continue stirring until all powder has dissolved. Temperature should not go higher than 60°C. If pH drops, add O.OlM borate buffer dropwise. Filter. Cool to room temperature, and adjust final pH to 8.2 with borate buffer. 60 mg/mL sodium dodecylsulfate (SDS) stock solution Prepare this and add 30 p.L phenol red indicator per 100 mL of solution. Adjust pH to 8 2 with borate buffer. Store at room temperature. Depending on the degree of the chromatm dispersion desired, anywhere from O-0.06% SDS m paraformaldehyde is used (see Note 2) CAUTION: Paraformaldehyde is harmful if ingested and can be absorbed through skin. Fine powder is easily dispersed through the air. 0.4% Photo-F10 200 (Kodak, Rochester, NY) in distilled H20. Add 30 pL of phenol red indicator per 100 mL of solution. Adjust pH to 8 0 with borate buffer
2.2. In Situ Hybridization 1. HEPES (N-2-hydroxypiperazme-N’2-ethanesulfonic acid) (Sigma, St. Louis, MO); random ohgonucleotide primer pd(N)s (Pharmacia, Uppsala, Sweden), dGTP, dCTP, dTTP (Boehringer-Mannheim, Mannheim, Germany); biotin-7dATP (Gibco-BRL); Large fragment (Klenow) of E. coli DNA polymerase I (Amersham, Arlington Heights, IL); Sephadex G25 or G50; 5% dmhlorosilane (Sigma) in carbon tetrachloride. 2. Phosphate buffered saline (PBS): 8 g NaCl, 0.2 g KCl, 1 44 g Na*HPO,, and 0.24 g KHzP04 in 800 mL distilled H20. Adjust pH to 7 4 with HCl. Add distilled H,O to 1 L 3. Antibleach mounting solution: Dissolve 100 mg of p-phenylenediamme in 10 mL of PBS. Add 90 mL of glycerol. Adjust pH to 9 0 with 1N NaOH (use litmus paper). Protect from light and store at -20°C.
Spyropoulos
134
and Moens
4. Alkaline phosphate (AP) buffer. 100 mM Tris-HCl, 100 mM NaCl, 50 mA4 MgC12, pH 9.0. 5 Color development solution. In a foil-wrapped flask, mix well 10 mL AP buffer, 66 l.tL nitroblue tetrazolium (NBT) substrate solution (Promega, Madison, WI, Gibco-BRL). Slowly add 33 ltL BCIP (5-bromo-4-chloro-3-indolyphosphate) Use within 1 h. 6. DAPI (4’,6-diamidino-2-phenylindole) solution* 0 1 mg/mL PBS Use 5-10 pL/ mL mounting solution 7 Deionized formamide: Stir formamide with analytical 20-50 mesh mixed bed ion-exchange resin (AG 501-X8) (BioRad, Richmond, CA) for 1 h at room temperature. Filter twice through Whatman #l paper. Store ahquots at -70°C under nitrogen (7). 8. TE buffer: 10 mM Tris-HCl, pH 8 0, 1 mM EDTA 9 1 mg/mL E. coli tRNA m TE buffer Use 20 pL/probe 10 20X Saline sodium citrate (SSC): 0.3M sodium citrate, 3M NaCl, pH 7 0 11 Fluorescem-conjugated avidin (Sigma): 2 pg/mL in 4X SSC, 1% BSA (bovine serum albumin). 12. High salt elutron buffer 0 1M NaCl, 0 1 mM EDTA, 0 02M Tris-HCl, pH 8.0 13 Hybrrdtzatron buffer. 4X SSC, 2% DNase-free BSA, 20% dextran sulfate 14. Propidium iodide (PI) solution: 0 1 mg/mL PBS Use 5-10 pL/mL of mounting solution 15 Components of reaction mixture: 200 mM HEPES, pH 6.6; 50 mM Tris-HCl, pH 7.4; 5 mM MgCl,, 0 8 mM 2-mercaptoethanol; 0 14 AZGOU of random ohgonucleotlde primer, 10 pM each of dGTP, dCTP, and dTTP; 25 pM biotin-7 or biotin-lCdATP, 10 pg BSA; 2-3 U of Klenow fragment; purified DNA insert of interest 16 1 mg/mL RNase A m 2X SSC. To use, dilute 1: 10 and boil for 30 min to inacttvate DNase contaminants 17. 1 mg/mL salmon sperm DNA m TE buffer. Somcate three times 10 s each, until viscosity is no longer apparent. Freeze m 20-pL aliquots. 18 Sodium Tris-EDTA (STE) buffer. 0.1 M NaCl in TE buffer.
3. Methods 3.1. Surface
Spreading 3.1.1. Cleaning
Testicular Coverslips
Material
1. 2. 3. 4
Rub coverslips with window cleaner (Windex) using a Kimwipe tissue paper Rinse under hot running water, then distilled H,O. Wipe dry with Klmwipe. Use forceps to handle the coverslips With a diamond pencil, scratch an identifying number m the top corner of the coverslip Make an asymmetrical cut in the diagonally opposite corner to identify up and down 5. Record the markings for future reference.
3.1.2. Preparation
of Tissue
1. Remove the testes of a relatively young male (about 25 d old for rats, mice, or hamsters where there will be few spermatozoa) For animals with few merotic nuclei, see Note 3.
FISH 2 3. 4. 5. 6. 7 8. 9 10 11 12 13 14. 15
with Mezotic
Prophase
Chromosomes
135
Remove all fat Rinse with MEM in 25-mL beaker. Hold the testis wrth forceps and cut the opposite srde. Extrude the semmrferous tubules into a drop of MEM on dental wax Transfer the tubules twtce to a fresh drop of MEM. Cut SIX times with a grease-free razor blade. Squeeze the tubules wrth clean forceps to extract the spermatocytes from the tubules. Transfer the cell suspension to a 15-mL plastic centrifuge tube Fill the tube wrth MEM, and draw the suspension up and down through a widebore plastic transfer pipet to separate the cells. Cap the tube with Parafilm and invert three times to mrx the contents Let stand until all the tubules have settled Transfer the supernatant with the spermatocytes to a clean 15-mL plastic centrifuge tube Spin for 5 min at 160g Drscard the supernatant and gently resuspend cells m the residual MEM
3.1.3. Surface Spreading 1, Fill a small Petri dash with 0 05% hypotonic NaCl solution such that the surface is convex. 2 Gently tap cell suspension to mix and draw up 10 pL with a prpetor 3 Wipe the tip clean, and carefully expel the cell suspension such that a drop hangs from the pipet tip. 4. Touch the lower edge of the drop to the surface of the NaCl solutton. Cells wrli spread out over the surface (see Note 4) 5. Allow to stabilize for 10 s, then pick up the cells by lowermg a coverslip onto the surface. 6. Let sit for 10 s, then roll the coverslip off the NaCl bath by lifting first one edge, then the rest 7 Place the coverslip in a Coplin jar with paraformaldehyde and SDS, rf required, for 3 mm at 4’C (Ice-water bath). 8 Move to a second Coplin jar with just paraformaldehyde at 4°C for an additional 3 mm 9 Wash twice for 1 mm each in Photo-F10 solution at 4’C, then once for 1 min m Photo-F10 solutron at room temperature 10. An-dry 11. While the coverslips are in the fixative and washing solutrons, additional spreads can be made: Rinse the spreading dish m distilled HzO, add fresh hypotomc solution, and spread the next 10 PL of cell suspension. 12. Let the coverslips an-dry overnight. Use them the next day or store dry at -70°C. 13 Nuclei and SCs are vrsrble with phase contrast mrcroscopy. 3.2. In Situ Hybridization 3.2.1. Probe Preparation To maxrmrze signal mtensrty and reproducibility, we use isolated inserts Instead of linearized plasmids. These are prepared by agarose gel electrophoresis (7) as follows:
Spyropoulos
136
and Moens
1. Use appropriate restriction endonucleases to release the DNA Inserts of interest from their plasmids (Plasmid DNA can be prepared from CsCl or mini-plasmid preparations provided the final amount of purified insert DNA is at least 100 ng ) 2 Electrophorese and electro-elute the Insert from the gel onto NA45 ion-exchange paper (Schleicher and Schuell, Keane, NH) 3 Elute from the paper in high salt elution buffer at 60°C for 1 h according to supplier’s directtons. 4. Precipitate the DNA with 2 vol of 95% ethanol and wash once with 70% ethanol. 5 Dry under vacuum at room temperature and dissolve in an appropriate volume of sterile distilled HzO. 6. Alternatively, excise the DNA insert from the gel with a razor blade and centrifuge through sterile siliconized glass wool (8) (First soak the glass wool for 5 min in 5% dichlorosilane m carbon tetrachloride, rinse extensively m distilled H,O, air-dry, and autoclave.) 7 Estimate the amount of purified DNA by visual comparison with standard amounts of DNA run on the same ethidium-bromide stained agarose gel 8 Biotinylate 20-50 ng of isolated DNA with the random priming reaction (9). (Up to 300 ng of DNA can be biotinylated.) 9. Denature the DNA Insert by heating in boilmg water for 5 mm and instantly cool on ice. 10 Make up to 25 ltL with reaction mixture and incubate at 37°C for 1 h. 11 Stop the reaction by adding 2.5 l.tL of IM EDTA and 72 5 l.tL of STE 12 Separate the unincorporated nucleotides from the biotmylated DNA by centrrfuging through Sephadex G25 or G50 (6). 13 Dot blot the btotinylated DNA as well as known amounts of biotinylated DNA (Gibco-BRL) on mtrocellulose paper and incubate with streptavtdm-conjugated alkalme phosphatase in the dark for 45 min at 37’C 14. Wash the paper three times m PBS, then incubate with color development solution at room temperature for 5 min or more The extent of biotmylation can be estimated by comparing the color development of the experimental DNA with the standard biotinylated DNA The length of smgle-stranded biotinylated DNA prepared by this protocol is approximately 50-100 nucleotides
3.2.2. Hybridization 1. Mix 5 pL of stock salmon sperm DNA, 20 pL of stock tRNA, and 10 ng of biotmylated probe m 20 l.tL STE 2 Precipitate by adding 0.1 vol of 3M sodium acetate, pH 5.5,2 vol of 95% ethanol, and freezing in dry ice or at -7O“C. 3. Centrifuge to collect the precipitate, wash once m 70% ethanol, and dry under vacuum at room temperature. 4 Mark the surface-spread coverslips with identifying marks using a diamond penCll.
5 Scan the coverslip with a phasecontrast microscope to determine which side the nuclei have adheredto, and make sure that this side 1sidentifiable by your markings. 6 Incubate the coverslips for 30 mm at 37°C m boiled RNase, then wash three times in 2X SSC
FISH
with
Meiotic
Prophase
Chromosomes
137
7. While the coverslips are incubating in the RNase, add 5 ~.LL100% formamide to the probe mixture. Denature for 10 min at 75°C and cool lmmedlately on ice. 8. Add 5 pL hybridization buffer to the probe mixture, stir well, and centrifuge for 5 s to bring down all the liquid. 9 Cover the bottom of a 75-mm Petri dish with Parafilm and place the lo-pL drop of probe cocktail on the Parafilm (may be spht in 2 x 5 pL drops for half coverslips) 10. Denature the nuclei in 70% formamide in 2X SSC for 2 min 11. Immediately dehydrate for 5 min each through cold 70,95, and 100% ethanol 12. Air-dry. 13. In a Petri dish, place covershp, cell side down, on a drop of probe Add some tissue paper soaked in 2X SSC (but not touching the coverslip) to create a hurrud chamber. 14. Cover the dish and seal with Parafilm. 15. Incubate at 37°C for 3 h or overnight. 16. Remove unhybridized probe by washing the covershps m 50% formamlde in 2X SSC at 37°C for 30 min, in 2X SSC at 37°C for 30 mm, and finally in 1X SSC at room temperature for 30 min (Use lower temperatures if lower stringency 1s required.) 1 2. 3. 4. 5.
4.23. Detectzon Incubate coverslips in avidin-FITC (fluorescein isothiocyanate) for 30 min at room temperature Wash for 10 min each m 4X SSC, 4X SSC with 0.1% Triton X-100, and 4X SSC. Rinse for 1 min m 4% Photo-F10 in water. Lower the cover&p, cell side down, on a drop of mountmg medium with either DAPI or PI on a clean glass shde. Blot with bibulous paper and seal the edges of the coverslip with a syrmge filled with rubber cement. The DNA stains are fully developed in about 1 h. FITC fading can be minimized by storing the slides at -20°C.
4.3. Microscopy and Photography 1 Unstained spread nuclei can be visualized by phase contrast microscopy. 2. Fluorescent probes are visualized with a fluorescent microscope with the appropriate filters. FITC 1s visualized with an epifluorescent exciter filter 450-490 nm, reflector filter 510 nm, and barrier short pass of 515-560 nm. DAPI filters are exciter filter 330-380 nm, reflector 420 nm, and barrier 420 nm. PI filters are exciter filter 450495 nm, reflector 510 nm, and barrier 515 nm. The latter will show FITC as well as PI. 3. Use Kodak T-Max 400 black-and-white film for photographs or Fuji Color 400 film for slides. With a 100x objective lens, expose for 15-30 s We recommend commercial development No filters are necessary when makmg prints with Cibachrome paper.
4, Notes 1. Coverslips or slides? We use coverslips for in situ hybridization to minimize the amount of probe required. However, since coversllps are delicate to
138
Spyropoulos
and Moens
handle, some workers prefer to use glass slides. The fixation procedure is the same as for coverslips except that SO-mL Coplin jars are used. The cleaning protocol 1s as follows. Use glass slides that are frosted on one side only (to be able to differentiate which stde holds the nuclei). Clean with a glass cleaner such as Windex, rinse m hot running water, then distilled water, and rub dry wrth a Kimwrpe. From then on, touch the slide only at the frosted end. Use 50-mL Coplm jars for the solutrons Prepare 100 mL of paraformaldehyde and 150 mL of PhotoFlo for each run of 10 slides 2 Adjusting the degree of spreading of chromosomes with SDS The degree of spreadmg of the chromatm can be controlled by adjusting the amount of SDS m the first paraformaldehyde fixation from O-0.06% The more SDS, the greater the spreading. For rats and mice, use 0 03% in 50 mL of paraformaldehyde, for hamsters, 0 015%; for humans, 0.06% 3 Variations of spreadmg technique for different species. In some species, a lack of materral precludes surface spreading on a NaCl bath as descrrbed below. An alternate method, which preserves all cells, is to place a drop (50 I.~L mmimum of liquid) of testicular material directly on a clean shde Lower a covershp on top and let sit for 10 min Remove the covershp by tmmersmg the slide in a Coplm Jar of paraformaldehyde and gently rock the slide until the coverslip falls off. If thts fails, let sit a few minutes more and try again. Transfer the covershp to a Coplin jar of fresh paraformaldehyde (with SDS, d necessary) and contmue the fixation as described in the Methods. If using slides for the in situ hybridrzation instead of coverslips, use a strip of Parafilm to cover the cell suspension on the glass shde instead of a coverslip, as rt 1s more easily removed and will not shear the nucler 4. Spreading problems. During surface spreading, the cell suspensron sometimes drops to the bottom of the dish rather than spreading out on the surface. This is the result either of grease in the preparation or of the cell concentratron being too low. Solution: change the spreading dish and/or prpet tips. Failing that, spm down the cells to concentrate them (Sometimes the situation 1s not as bad as it seems, so check the shdes before aborting what mrttally appears to be a bad run )
References 1 Counce, S. J and Meyer, G. F (1973) Differentration of the synaptonemal complex and the kmetochore in Locusta spermatocytes studied by whole-mount electron microscopy Chromosoma
44,231-253.
2 Dresser,M. E. andMoses,M. J (1980)Synaptonemal complexkaryotypmg m spermatocytes of the Chmesehamster(Crmetulusgriseus)IV. Light andelectronmrcroscopyof synapsisand nucleolardevelopmentby stlver stamingChromosoma 76, l-22. 3 Drsteche,C M., Trantravahr,U., Gandy,S , Ersenhard,M , Adler, D., and Kunkel, L M (1985) Isolatron and characterization of two repetitrve DNA fragmentslocatednear the centromereof the mouseX chromosomeCytogen Cell Genet 39,262-268 4 Moens, P. B and Pearlman,R. E. (1990)In situ DNA sequencemappingwith surfacespreadmousepachytenechromosomesCytogenet. Cell Genet 53,219,220 5 Moens, P. B and Pearlman,R E (1989) Satellrte DNA I m chromatm loops of rat pachytenechromatmandm spermatrdsChromosoma 98,287-294 6. Moens, P B andPearlman,R E (1991)DNA sequencelocalizatronm merotrcchromosomes,m Methods wz Cell Bzology, vol 35 (Hamkalo,B. A andElgrn, S. C R , eds), Academic,New York, pp 101-108
FISH
with
Meiotic
Prophase
Chromosomes
7. Sambrook, J., Fritsch, E. F , and Maniatis, T. (1989) Molecular Cloncng. A Laboratory Manual. Cold Spring Harbor Laboratory, Cold Spring Harbor, New York, pp. 1 102, 6.3-6 35 8. Heery, D M., Gannon,F., andPowell, R (1990)A simplemethodfor subcloningDNA fragmentsfrom gel slice.Trends Genet. 6, 173. 9 Feinberg, A. P. and Vogelstem,B. (1983) A techniquefor radiolabelmgDNA restriction endonucleasefragmentsto high specrfrcactivity Anal. Biochem 132, 6-13.
CHAPTER 13
Strand-Specific Fluorescence In Situ Hybridization for Determining Orientation and Direction of DNA Sequences Julianne
Meyne
and Edwin
H. Goodwin
1. Introduction An innovative variation of fluorescence in situ hybridization (FISH) allows preparation of single-stranded chromatids for determination of chromosomal orientation and strand direction of DNA sequences(I). Standard fluorescent in situ hybrtdization methods rely on nucleotide base pairing between a labeled probe and the complementary chromosomal target sequence. Both probe and target DNAs must be functionally single-stranded at the start of the procedure. Single-stranded probes can be constructed or prepared, but the chromosomal DNA must be made single-stranded by denaturation. Because both strands are present in both chromatids of each chromosome, even single-stranded probes will hybridize to both chromatids of the target chromosome. Selectively removing one strand of the DNA double helix from each chromatid makes strand-specific FISH possible. Single-stranded probes can be hybridized to single-stranded chromosomal DNA without denaturation. Probes of repetitive sequencesarranged head-to-tail in tandem arrays will hybridize to only one chromatid. In contrast, probes of ubiquitous repeat sequences,such as Ah, that are present m both directions on each DNA strand will hybridize to both chromatids. Thus, the method reveals the orientation of repetitive sequences and has been designated as CO-FISH for chromosome orientationFISH. This procedure is shown m Fig. 1. Slides prepared for the CO-FISH method can also be used to determine the direction of the DNA strand to which a single-stranded probe hybridizes. This procedure is referred to as chromosome orientation and direction FISH, or COD-FISH. The basis of this analysis is outlined in Fig. 2. Multiple color and sequential hybridizations can be used on CO-FISH slides. Two or more single-stranded probes with different molecular tags can be hybridized at once, Just as for standard FISH methods. Sequential hybridizations are very simple. After the first hybridization, simply rinse the slide in 2X SSC to remove any excessprobe from the slide, dram to remove excess2X SSC (but do not allow slide to dry), and then hybridize again with another probe. From Edlted
Med~ods m Molecular Bfology, Vol 33 In SW Hybrrdfzabon Protocols by K t-l A Choo CopyrIght Q 1994 Humana Press Inc , Totowa, NJ
141
Meyne and Goodwin
142
uv
BrdU
W ca
and Exe III
//I_ A
B
E
Fig. 1. An outline of the CO-FISH procedure. (A) Cell cultures are grown in medium containing the nucleotide analog bromodeoxyuridine (BrdU) for one round of replication. (B) BrdU is substituted for thymidine at many sites within the newly replicated DNA strands. Each replicated chromosome now contains sister chromatids that are singly substituted in opposite DNA strands. Metaphase chromosome spreads are prepared by standard methods. After staining with the fluorescent DNA-binding dye Hoechst 33258, cells are exposed to ultraviolet light. The UV exposure induces nicks in the BrdU-substituted DNA strands. Nicked DNA serves as a substrate for exonuclease III (Exo III), an enzyme that excises nucleotides from one strand of double-stranded DNA starting at the sites of nicks. (C) This method effectively removes the substituted strand of each chromatid, while leaving the unsubstituted strand relatively intact. It is important to note that the single strands remaining in each of the two chromatids are complementary. (D) Hybridization of a single-stranded probe of a tandem repeat arranged in a headto-tail orientation will result in hybridization only to the chromatid with the complementary strand present. (E) Detection of the hybridization site will demonstrate fluorescence on only one chromatid.
Sequential hybridization is preferred for two color hybridizations with complementary strands of repeat probes. We have done up to four sequential hybridizations on a single slide. The only limitation is the background hybridization after detection of the signal. This problem may be reduced by using probes labeled directly with fluorescent nucleotides, rather than immunofluorescence detection. Essentially any method used for in situ hybridization is applicable to the CO-FISH method described here. 2. Materials 1, Cell culture (see Note 1) and reagents,e.g., medium, trypsin, Colcemid. 2. 1W3M bromodeoxyuridine
(BrdU) in Dulbecco’s
3. 75 mM KC1hypotonic solution.
4. Fixative solution. Mix 3: 1 methanol:acetic before use.
phosphate buffered saline.
acid. Do not store for more than 1-2 h
Strand-Specify
143
FISH
A
B
Fig. 2. An outline of the procedure for COD-FISH. (A) The C-rich strand of the telomere probe is cohybridixed with a single-strand, sense or antisense, of the sequence of interest. Because the G-rich telomere sequence overhangs the 3’ end of the DNA helix, the C-rich strand probe will hybridize to the 3’ end of the DNA strands in each chromatid. The sequence of interest will hybridize to its complementary sequence. (B) The 5’40-3’ direction of each strand can be determined by the position of the telomere fluorescence. The direction of the sequence of interest can be inferred from this information. 5. Microscope slides and 22 x 50 mm glass coverslips. 6. 500 ccg/mL Hoechst 33258. 7. 2X SSC solution, pH 7 (1X SSC = 0.15M sodium chloride and 0.015M sodium
8. 9. 10. 11. 12.
citrate). Ultraviolet light source (see Note 2). Exonuclease III and buffer (see Note 3). Single-stranded nucleic acid probe (see Note 4). Standard materials for hybridization and detection. Fluorescence microscope with camera and/or image analysis system.
3. Methods 3.1. Bromocbo~uridine Incorporation 1. Subculture plateau phase fibroblasts into medium containing 10% BrdU (see Note 5). 2. Incubate for a period equal to one doubling time of the culture being used. 3. Add 0.1-0.2 @nL of Colcemid for 24 h (see Note 6).
Meyne
144
and Goodwin
4. Harvest the cell culture for metaphase chromosome preparations usmg standard methods. For human fibroblast cultures we use a 15-mm hypotomc treatment in 75 mM KC1 followed by fixation in 3: 1 methanol-acetic acid fixative. The suspension is dropped onto clean wet slides and allowed to air-dry (see Note 7) 3.2. Preparation of Single-Stranded Chromosomal DNA 1. Stain slides in 0.5 pg/mL Hoechst 33258 m 2X SSC for 15 min at room temperature (see Note 8) 2. Rinse slides briefly m distilled water 3. Air-dry the slides or drain off excess water. 4. Place two drops of 2X SSC on each slide and cover with a 22 x 50 mm coverslip. 5. Expose to long-wave UV light for 30 mm. 6 Remove the coverslips, rinse the slides briefly m distilled water, and au-dry. 7. Place 50 pL of exonuclease III solution (3 U&L m reaction buffer) on each slide 8. Cover with a 22 x 50 mm coverslip and incubate at room temperature for 5 min 9 Remove the coverslips and rinse the slides briefly in distilled water. 10. Allow the slides to air-dry. 3.3. Hybridization and Detection No denaturation step is necessary because the DNA is single-stranded after the BrdU/33258/UV/Exo III treatment. The hybridization mtx is directly applied to the treated slides and incubated overnight at 37°C. Single-stranded probes should be prepared in the same type of hybridizatton mix as would be used for double-stranded versions of the probe. For example, if a smglestranded probe contains ubiquitous repeats, tt should be blocked with repetitive DNA. If a synthetic oligomer probe is used, it should be hybridized without dextran sulfate or blocking DNA. The detection procedures used for CO-FISH are the same as for standard FISH methods. 3.4. Analysis Because the chromosomal target DNA is a single strand, the fluorescence signal is less intense than for standard FISH with double-stranded target DNA and probes. For repetitive DNA sequences, the fluorescence obtained ts adequate for standard fluorescence microscopy. For single-copy DNA or singlestranded probes made from inserts of recombinant vectors the signal may be too weak to clearly delmeate without additional amphfication or use of an image analysis system. Staining and analysis are otherwtse the same as for standard FISH protocols.
4. Notes 1. Any type of cell culture with a reasonable rate of growth can be used. For optimal numbers of singly substrtuted chromosomes, plateau phase fibroblasts are best It is also desirable to know the approximate doublmg time of the cell culture used 2 Long-wave UV is better than short-wave UV We use a Stratalmker 1800 UV irradiator equipped with 365-nm bulbs (Stratagene, La Jolla, CA). The length of
Strand-Specific
3. 4.
5. 6.
7.
8.
FISH
145
exposure will vary if a different wavelength is used. If a sunlamp is used, place a thin sheet of plastic between the UV source and the slides to protect the DNA from dimer formation It is also necessary to use caution to avoid optic exposure when using UV light An enclosed source is best. Alternately, use protective glasses or a face shield. We use reaction buffer A (International Btotechnologies, Inc., New Haven, CT), but any buffer recommended for use with exonuclease III can be used. The CO-FISH method can be used to prepare slides for hybridization of any type of probe, including synthetic oligomers and riboprobes Keep in mind, however, that double-stranded probes will not reveal orientation or direction because they will hybridize to both (complementary) chromatids. The concentratton of BrdU may need to be adjusted for other cell types or for cells from other species. The mitotic index is dependent upon the type of cell culture used, the passage number, and length of Colcemid treatment For early passage diploid human fibroblasts after 4 h of Colcemid, our typical mitotic index IS about 7%. For lesscondensedchromosomeswe use2 h Colcemid At this pomt, the number of first division cells after BrdU incorporation can be monitored by any of several methods* a DAPI fluorescence quenching, b. Differential Giemsa staining (sister chromatid exchange method), or c. Labeling wtth anti-BrdU antibody. We typically obtain greater than 95% first divbon, singly substitutedmetaphases when usingplateauphasediplotd human fibroblasts. If several slidesare stained at once, it 1ssimplestto prepare 50 mL of stain solution in a Coplin jar
Reference 1 Goodwin,E H andMeyne, J (1993)Strand-speaflcFISH revealsorientationof chromosome18alphoidDNA Cytogenet Cell Genet 63, 126,127
CHAPTER 14
Radioactive In Situ Hybridization to Replication-Banded Chromosomes Elizabeth
Earle
and K H. Andy
Choo
1. Introduction The technique of radioactive in situ hybridization of chromosomes is increasmgly being replaced by nomsotopic methods. Amongst the principal reasons for this are greater convenience, resolution, safety, and speed offered by the nonradioactive methods; and the computerization of digital imaging microscopy, which has allowed previously unachievable maneuvers such as complex multicolor chromosome painting. Such a swing in preference is attested by the disproportionate application and publication of new sophisticated protocols based on the nomsotopic methods m recent times. However, the “fossilizing” radioactive procedure stall holds a significant place m various chromosomal studies because of some of its unique features. For example, it offers an acceptable way of quantitating signal (and thus DNA sequence) distribution on different chromosomal sites (1-7) In laboratories where the more elaborate digital imagmg equrpment is not available, extended autoradiography offerred by radioactive in situ hybridization provides the sensitivity otherwise unattamable with nonradioactive approaches, especially when small probes or heterologous probes are used (see Chapter 15). Also, the hybridization slides and results obtained will form a permanent record that can be conveniently assessedor reassessedwithout any further treatment over a period of weeks, months, or even years. We describe here a protocol of in situ hybridization to replication-banded human chromosomes using 3H-labeled DNA probes. The method IS based on that of Buckle and Craig (8) as previously described (9). A brief discussion on the application of the basic protocol to mouse chromosomes is also presented. 2. Materials 2.1. 3H-Labeling of Probe 1. Tntiated nucleotides.Deoxy ( 1’,2’,5-3H)cytidme 5’-triphosphate,ammonium salt (3H-dCTP; Amersham, Arlington Heights, IL; approx 50 Ci/mmol), deoxy (1’,2’,2,G3H)adenosineS-triphosphate,ammoniumsalt(3H-dATP) (Amersham), approx 60 Ci/mmol); (methyl, 1’,2’-3H) thymldme 5’-triphosphate, salt (3H-dTTP, Amersham;approx 120 Ci/mmol). From Edlted
Methods R Molecular &o/ogy, Vol 33 In SW Hybndrzabon Protoco/s by K H A Choo Copynght Q 1994 Humana Press Inc , Totowa, NJ
147
ammonium
Earle
148
and Choo
2 Desiccator and vacuum pump 3. Random priming labeling kit or mck-translation krt for use with any labeled dNTP (Amersham or Boehrmger Mannhelm, Mannham, Germany). 4 G50 medium Sephadex. 5 g m 100 mL of pure water. Autoclave and store at room temperature. 5. Scintillation p-counter 6 Scintillation fluid. 1 L: 5.5 g (2,5-dlphenyloxazole PPO, Packard), 0.1 g POPOP (Packard)(l,Cbis[2-(5-phenyloxazolyl)]-benzene), 667 mL toluene, 333 mL Triton X-100. Star m lightproof container in fume cupboard for l-2 h Store m brown bottle at room temperature. 7. Lyophilizer (e.g., DynavacrM freeze-drying unit).
2.2. Brd U Incorporation
and
Chromosome
Preparation
1 Whole blood (2-5 mL) collected in a sterile heparimzed tube 2 Tissue-culture-quality plastic centrrfuge tubes (10 mL). 3 Phytohemagglutinin (PHA) (Wellcome Diagnostics, Dartford, UK): Reconstttute in 5 mL of distilled water as duected. Store at 4“C for 2-3 wk only. 4. Culture medium 199 (e.g., Flow Laboratones, McLean, VA, Gtbco-BRL, Garthersburg, MD). Medium 199 (with Hanks’ salts containing bicarbonate) Fetal calf serum t,-Glutamine, 200 n-&I Penicillm Streptomycin PHA HEPES, lM, pH 7.4 5
100 16 0.3 10,000 10 2.4 2
mL mL mL u 1: mL
10 mg/mL 5-Bromo-2-deoxyundme (BrdU) (Sigma, St Louis, MO) Mtllipore filter (0 22 p.M). Dtspense in l-2-mL aliquots Store wrapped m foil at -20°C Use at 200 pg/mL (1 e , 0.1 mL of 10 mg/mL stock/5 mL of blood culture)
CAUTION: This chemical is mutagenic. inhale powder.
Therefore, wear gloves and do not
6. 0.25 mg/mL Thymidine (I.e., 10e3w, cell-culture reagent, Sigma). Milhpore filter. Store m 2-mL aliquots at -20°C Use at a final concentration of 10e5M in culture medmm. 7 Phosphate-buffered salme/Dulbecco (PBS), pH 7 2 (calcmm- and magnesmmfree) Autoclave to stenhze. 8. 20 pg/mL Colchicine (BDH) or colcemid (Stgma or Gtbco-BRL) Store wrapped in foil m l-mL ahquots at -20°C (hght- and temperature-sensittve; will detertorate over several years). For use, dilute 1:50 to give a final concentration of 0.4 pg/mL m culture medium. 9. 0 56% Potasstum chloride m water. Store at room temperature. 10 Cell frxattve: 3/l (v/v) analar methanol/glactal acetic actd. Prepare fresh for each harvest 11 Glass dishes and shde carriers Horizontal staining dish with dish cover, removable glass slide rack wrth handle.
Radioactive
In Situ Hybridization
of Chromosomes
149
12 Good quality glass shdes with frosted end and 22 x 50 mm covershps* Soak overnight m detergent (2% Decon-90 or Lipsol), rinse well in distilled water, soak in two rinses of ethanol, and air-dry. Store in dust-free container. 13. Lightproof slide box. Include a perforated tube contammg silica gel as a desiccant. 14. Darkened alcove. Reserve a corner of the laboratory that can be isolated with a heavy floor-to-ceiling curtain. Facilities in the alcove should include a work bench, benchtop centrifuge (2OOg), water bath, and a table with lamp with yellow-green darkroom lightbulb (e.g., Phillips, 240-250V PF71OB)
2.3. Slide Treatment 1. 1 mg/mL RNase stock (Boehringer Mannheim or Sigma) m TE buffer (10 mM Tris-HCl, 1 mM EDTA, pH 7.4). Boil for 10 mm to remove DNase contamination Dilute to 100 l.tg/mL in 2X SSC Mtllipore filter and store m 2-mL aliquots at -20°C. Stable to freeze-thawmg. 2. Ethanol (AR) series: 10,50, 75,95, and 100% ethanol 3. 20X SSC. 1L 175 g sodium chloride and 88 g tri-sodium citrate. Store at room temperature. 4. Formamide (Merck AR, Darmstadt, Mannhelm, Germany). For each experiment, freshly deionize 200 mL of formamtde by addmg 20 g of BioRad mixed-bed resin. Stir at room temperature for at least 2 h or overnight Filter and store at 4°C in a dark bottle. CAUTION: Formamide is toxic. Therefore, wear gloves and handle in a fume hood. 5 DNAdenaturauon solution. Mix 140 mL of deionized formanude, 0.1 mL of 0.25M EDTA, and 60 mL of 2X SSC Adjust to pH 7.0 with 5MHCl Make up fresh pnor to use. 6. Moist chamber Any autight box with a sheet of Whatman filter paper moistened with 2X SSC. 7 Black plastic hghtproof bags to protect slides during various procedures
2.4. Hybridization
and Washing
1. 0.2% Sodium dodecylsulfate (SDS), 10 mM EDTA. Store at room temperature 2 50% Dextran sulfate (Pharmacia, Ptscataway, NJ). Boil to dissolve Cool slowly. Store in 1-mL ahquots at -20°C. Stable to freeze/thawmg. 3. 10 mg/mL Salmon sperm DNA (Boehringer Mannheim) Cut threads of dehydrated DNA into small pieces with clean scissors. Add 500 mg to 50 mL of distilled water and dissolve in a 65’C water bath for several hours. Shear by passmg through three successive hypodermic needles (19,21, then 25 g) using a 50-mL syringe. Boil for 10 min. Store at -2O’C. 4. 20X SSPE solution: Dissolve 17.4 g NaCl and 2.8 g NaH,P04.2H,0 in 80 mL of dtstilled water. Add 10 mL of 200-mM EDTA (final cone 20 mM) AdJust to pH 7.4 with cone NaOH and make up to a final vol of 100 mL wtth distilled water Store at room temperature. 5. Hybridization buffer: 1 mL Final cont. 50% Deionized formamide 500 I.LL 50% Dextran sulfate 200 l.lL 10% Salmon sperm DNA (10 mg/mL) 20 l.tL 0.2 mg/mL 20X SSPE 250 l.tL 5X Distilled water 30 l.tL Prepare fresh for each experiment.
Earle
150 6 Coverslip rubber-seal solutton (e.g., “Earth” brand [Marumi Japan] rubber solution for tube repairing) 7 Dry incubator or water bath, 42’C.
and Choo
Industry Co Ltd.,
2.5. Autoradiography 1. Emulsion (Ilford nuclear emulsion L4 [crystal diameter 0.13 pm], Amersham RPN 41 [crystal dtameter, 0.13 pm] or Kodak TM NTB-2 [crystal dtameter 0.26 pm]) Prepare according to the directtons of the manufacturer, in total darkness, and use the approprtate safelight only when necessary Store in a glass jar in a lightproof box at 4°C (do not freeze). Prepare a 1.1 solution of L4 emulsion by melting, for example, 50 g of mousse at 46’C and mixing with 50 mL of pure water at 46’C (avoid forming air bubbles). Stir gently with a glass rod or plastic spoon (avoid contact of emulsion wtth any metal to minimize formation of background latent image). Stand for 10 min at 46°C. Dispense mto smaller ahquots in slide mailers, enough for an average-size experiment, or store whole at 4’C and remelt for multiple use until background becomes unacceptable. It is important to ensure complete equihbratron and melting of emulsion at 46°C to avoid a heavy granular appearance on slides 2. Wheaton glass dishes and slide holder. 3. D19 developer (also available commercially from Kodak). 2 g Metol @methylaminophenol sulfate) (BDH Pharmaceuttcals, London, UK), 90 g anhydrous sodium sulfite, 45 g sodium carbonate, 5 g anhydrous potassium bromtde, 8 g Quinol (hydroquinone) (BDH). Dissolve in the order shown above and make up to 1 L with distilled water Store in a brown bottle in the dark at room temperature Remove an aliquot for each experiment and discard after each use. Wear gloves. 4. Stop solution. 1% glacial acettc actd in water. 5. Fixative: 200 mL of Ilford Hypam, 800 mL of distilled water. While sturing constantly, slowly add 25 mL of Ilford Hypam hardener Store m a brown glass bottle m the dark at room temperature (see Note 1) The fixative can be reused for several experiments. Wear gloves 6 Darkroom. This should be equipped with a 46’C water bath and a safehght filter Ilford 904 (dark brown), for example, is suitable for both, Ilford L4 and Amersham RPN41 emulsions, or use a red safelight for KodakrM emulsions
2.6. Chromosome
Staining
and Analysis
1. 1 mg/mL Hoechst 33258 (Sigma) Bisbenzimide trihydrochloride. Aliquot m 2-mL vol, wrap m foil, and store at -2O’C. This can be thawed and refrozen several times, and IS hght-sensitive. Avoid inhaling or contact with skm 2. Phosphate-buffered saline (PBS) (BDH Pharmaceuticals): Gurr buffer tablets, pH 6.8 3 Glemsa Gut-r’s improved R66 (BDH Pharmaceuticals) Immediately before use, dilute Giemsa to 10% in PBS, pH 6 8. Filter into a Coplin staining jar. 4. Table lamp with a long-wavelength UV light tube (Sylvania; Blackltte blue, 15 W). 5. High resolution hght microscope fitted with 12 5x eyepteces and 10x and 100x objectives, green filter (546 nm) or blue-green interference filter
Radioactive
In Situ Hybridization
of Chromosomes
151
6. Films for black-and-white photography. Agfa CopexTM rapid AHU TRI 13 gives good results.
3. Methods 1
2. 3. 4. 5.
3.1. %-Labeling of Probe Label 100-200 ng of DNA by random-priming or nick translation usmg 50-100 p.Ci of a cocktail of 3H-nucleotides (e.g., -20 p.Ci 3H-dCTP, -20 pCi 3H-dATP, and -40 pCi 3H-dTTP, based on the spectftc activities given in Section 2.1.) according to instructions wtth labeling krts (see Note 2). Remove unincorporated nucleotides by passing the reaction mixture through a G50 Sephadex column (made up in a Pasteur pipet or 1:mL disposable pipet) and collect 100 pL fractions. Add 2 pL from each fraction to an aliquot of scintillation flmd and count in a pcounter. Pool the fractions from the first peak of radioactivity, which will contam the labeled probe (see Note 3). Divtde into aliquots suttable for one experiment, lyophillze, and store at -20°C 3.2. BrdU
Incorporation
and
Chromosome
Preparation
Use full safety precautions when handling blood samples. Wear protective gloves and work in a class II biohazard hood. Discard waste mto hypochlorite or autoclave. The protocol described below is the replication G-banding method of Zabel et al. (IO), which yields banded chromosome preparations of high quality. 1. Add 0.2 mL of sterile heparmrzed whole blood to a lo-mL culture tube containing 5 mL of medium 199 (Section 2.2., step 4). (0.2 mL of whole blood in one culture tube should generate 5-10 slides.) 2. Place tubes in a sloping rack and culture for 72 h at 37’C. 3. Add 0 1 mL of BrdU to the blood culture to give a final concentration of 200 pg/ mL and mcubate inside a black plasttc bag at 37°C for a further 16-17 h (see Note 4). 4 In darkened alcove, remove BrdU by centrifuging the cells at 200g for 5 min, drscarding the supernatant into hypochlorite, and resuspendmg the cells in medium prewarmed at 37°C. 5. Repeat centrifugatron and resuspend the cells in 5 mL of prewarmed medium 199 containing 10m5M thymidme. (This releases the block m the cell cycle.) 6. Remcubate at 37°C for 6-7 h to reinitiate DNA synthesis and allow mitosis to proceed. 7. Add 0.1 mL of colchicine to a final concentration of 0 4 pg/mL and incubate for 15-30 min at 37°C (see Note 5). 8. Remove the medium by centrifugation at 200g for 5 min and resuspend in 7 mL of 37°C prewarmed hypotonic solution (0.56% KCl) 9. Incubate at 37°C for 15 min to achieve sufficient swelling of the cells. 10. Add 3 mL of cell fixative and mix thoroughly 11. Centrifuge the cells for 10 min and discard supernatant.
152
Earle
and Choo
12 Resuspend the pellet and slowly add a further 7 mL of cold (4’C) cell fixative, mixing well throughout 13. Stand on ice for 20 min before centrifuging. 14. Repeat steps 11 and 12 three times At this stage, cells can be stored in fixative (wrapped in foil) at -20°C for a few days If stored, the fixative should be changed before the slides are made 15. After the final fixative wash, resuspend the cells in a small vol (e g , 0 5 mL) of cold fixative and put 2-3 drops of cold cell suspension onto a slopmg dry glass slide 16. Air-dry, then check the slide under a phase contrast microscope and adJUst the cell concentration accordmgly for subsequent slides. 17. Store slides at -20°C in an airtight, dark slide box containing desiccant, and seal with black tape Slides should be stored for a few days before use and can be kept in this manner for at least 6 mo. Perform
m darkened
3.3. Slide alcove.
Treatment
1 Equilibrate the slide box to room temperature before openmg to avotd condensation on the slides 2. Destroy cellular RNA (which causes nonspeciftc hybridization background around cells) by adding 80 l.t.L of 100 pg/mL RNase to each slide. 3 Apply a 22 x 50 mm coverslip and incubate m a moist chamber at 37’C for 1 h 4 Remove the coverslip carefully by vertically floating off m 2X SSC. 5. Wash the slides in three changes of 2X SSC 6 Dehydrate for 30 s m each of lo%, 50%, 75%, 95%, and 100% ethanol, then air-dry. 7 Denature the chromosomal DNA into single strands by mcubatmg the slides for 4 mm at 65°C m prewarmed denaturation solution (see Section 2 3 , step 5), or at 70°C for 2 min. 8 Immediately plunge the slides into 75% ethanol precooled at 4’C 9. Dehydrate in 95% ethanol, followed by absolute alcohol at 4“C At this stage, slides can be stored m desiccant at 4°C for a few hours if necessary. The quantities
3.4. Hybridization and Washing used are suitable for 10 slides.
1. Add 5 ~.LLof 0.2% SDS, 10 mM EDTA, and 300 pL of hybridization buffer to 50 ng of 3H-labeled, lyophlltzed probe DNA (5 ng of labeled DNA/slide) Mix well. 2 Boil for 5 min to denature the probe, Chill on ice immediately Perform the following steps in darkened alcove. 3 Add 30 pL of hybridization/probe mix to each slide. 4 With forceps, carefully lower a 22 x 50 mm coverslip from one end and avoid trapping any au bubbles. 5. Seal the edge of the coverslip with rubber solution and place slides inside a sealed moist chamber on a dampened filter paper.
Radioactive
In Situ Hybridization
of Chromosomes
I53
6. Wrap the chamber in black plastic and hybridize overnight in a 42°C dry oven (or float in a water bath) 7 To wash the slides, peel off the rubber seal with forceps and carefully remove the coverslip by vertically floating off in 5X SSC. 8 Wash in 5X SSC for 5 min. 9 Irrespective of the stringency requirements (see steps 10 and 11, below) first wash slides in three changes of 2X SSC at room temperature for 20 mm each to remove excess probe. 10 For the detection of chromosomal sequences highly homologous to the probe, use a subsequent wash of 0.5X SSC at 6O“C for l/2 h, followed by two changes of 0 1X SSC at 60°C for l/2 h each (i.e., high-strmgency condrtions) (Fig 1) (see Note 6). 11 For the detection of related sequences, use a lower stringency wash of 1X SSC at 60°C for l/2 h followed by 0 5X SSC at 60°C for two 112-h washes (Fig 2) 12. Equilibrate the slides to room temperature in the same SSC concentration as the last wash for 15-60 min. 13. Dehydrate in ethanol as in Section 3.3., step 6, and store with desiccant at room temperature until ready for dipping in emulsion
3.5. Autoradiography Perform in total darkness in the darkroom only when necessary.
and use the prescribed
safelight
1. Set the water bath at 46°C. 2 Remelt 1: 1 diluted L4 emulsion m a 46°C water bath for 15-30 min. 3. Stir gently with a plastic spoon (avoid bubbles) and stand for 10 min at 46°C to allow air bubbles to disperse. 4. Dip a control (blank, clean) slide by slowly lowering in and raising out of the emulsion. 5. Stand it vertically to drain and check the evenness of emulsion under the safelight. 6 Dip hybridized slides individually and stand them in a vertical position in a lightproof box for about 1 h, until hardened and dry. 7. Transfer the slides to a lightproof slide box containing desiccant, seal with tape, and leave them to expose at 4°C for an appropriate length of time (see Section 3 6.). 8 To develop slides, equihbrate the slide box to room temperature before opening. (This avoids condensation on slides, which affects the latent image.) 9 Develop slides in D19 developer diluted 1: 1 in distilled water for exactly 5 min at 20°C (without agitation). 10 Rinse in 1% acetic acid stop solution for 30 s, and fix for 10 min m Ilford Hypam fixative with hardener. 11. Wash gently in slow running tap water for 1 h and proceed to stainmg. (The blank slide should be included to serve as a control for the presence of background grains in the emulsion )
Earle and Choo
Fig. 1. Detection of a silver grain (arrow) following 3H in situ hybridization of a unique sequence (pyruvate dehydrogenase) to the ~22.1-22.2 region of the human X chromosome (11,12). Reproduced with the permission of Ruth M. Brown.
3.6. Chromosome Staining and Analysis Do not allow slides to dry during the staining procedure. 1. Stain slides in Hoechst 33258 diluted to 15 pg/mL in 2X 2. Rinse in 2X SSC.
SSCfor 30 min.
3. Submerge slides horizontally and completely in a flat dish by covering with fresh 2X SSC to a depth of 2-3 mm. 4. Expose the slides for 1 h to a long-wave UV light by placing the light source 20 cm above the SSC level. (Avoid using excessive 2X SSC, since the increased depth will block penetration of the W light.) 5. Rinse the slides in PBS, pH 6.8. 6. Stain vertically for 20-30 min in 10% Giemsa. 7. Rinse in PBS, pH 6.8, and air-dry vertically. 8. Check the background grains on the blank slide. 9. Analyze the distribution of silver grains over karyotype to identify the chromosome or chromosomes that give a significant accumulation of probe signal (see Note 7). This involves finding cells with well-spread chromosomes and recording individual grains on a cumulative ideogram (see Note 8).
See Notes 9-l 1 for a discussion on the application of the present procedure to nonreplication banded chromosomes, metaphase preparations of different cell types, and mouse chromosomes.
Radioactive
In Situ Hybridization
of Chromosomes
Fig. 2. 3H detection of tandemly repeated satellite I DNA on different human chromosomes (indicated by numbers) under relaxed hybridization stringency (7).
4. Notes 1. The hardener is necessary to prevent the emulsion from swelling and lifting off slides. 2. 3H-nucleotides are supplied in 50% alcohol, so they have to be dried before use, using a desiccator and vacuum pump. 3. Incorporation of 20-50% and a specific activity of 3-5 x lo8 dpm&g probe DNA should be achieved. For probe DNA, either whole plasmid or eluted insert can be used, although we have found that the former sometimes gives unacceptably high background for unknown reasons. We have also used a single 3H-nucleotide with satisfactory results, but use of three labeled nucleotides offers higher specific activity and greater sensitivity. Four labeled nucleotides can also be used. Multipriming gives better incorporation than nick translation, especially when the probe is small or small amounts of DNA are used. 4. BrdU blocks DNA synthesis in the middle of the S phase and is therefore incorporated only into early replicating bands. After the addition of the BrdU and in
Earle
5. 6.
7. 8.
9
10. 11.
and Choo
subsequent steps, protect the cultures in black plastic bags and work in the darkened alcove. In these steps, absolute darkness is not essential, but using a darkened alcove is important to minimize nicking the BrdU-incorporated DNA by light Other workers who have omitted this precaution have produced less than satisfactory chromosome banding results. This arrangement is more convenient than the use of a standard darkroom throughout the entire experiment. Although the cells are already synchromzed by the BrdU, colchicme helps to disrupt the mitotrc spindle and gives better chromosome spreading and morphology It is important to preheat all washing solutions in a water bath to the selected temperature to ensure attainment of the desired stringency. If greater stringency IS necessary, the chromosome preparations will withstand a temperature of up to 68°C for 1 h An alternative washing schedule using a solution containing formamide can also be used, but this involves the handling of a toxic chemical and is therefore less convenient. A blue-green interference filter or a green filter allows good vtsuahzation of the banding pattern, but the silver grains are more easily identified in white light without a filter. Only grains on or touching a chromosome should be counted. Once a positive chromosome is identified, more grams can be scored to achieve a precise subregional localization using less well spread metaphases, as long as the essential chromosome is clear. For a tandemly repeated probe (see Fig 2) or a mixture of unique sequence probes, many grains may be present at one site, so a good signal should be seen on most cells. Vary the exposure time (e.g , overnight to many days) to give an optimal signal to permit either gram counting or direct visuahzation and photographic presentation of results For a single copy sequence, many cells will need to be scored to accumulate a significant signal, and a much longer exposure time of 10-30 d may be required. Nonreplicatron G-banding of chromosomes In some situations, hve cells are not available for rephcatron banding of the chromosomes (e g , cells without BrdU incorporation stored in fixative after routine cytogenetic analysis). Use of these cells necessitates the following additional steps, which are very tedious and which make accurate localization difficult The efficiency of hybridization may also be affected by the pretreatment of the chromosomes before hybridization. a. G-banding of chromosomes; b Prephotographmg selected metaphases; c. Destammg, d. Hybridization with labeled probe and autoradiography, e. Counterstainmg with Gremsa; and f Rephotographing the same cells to allow silver grams to be localized to bands on relevant chromosomes. Metaphase preparations of different cell types. With very minimal modifications, the replication banding method can be used for cultured fibroblasts, somatic cell hybrids, continuous lymphoblasts, and other cell hnes. Replication banding of mouse chromosomes. Since the study of human and mouse genetics very often complement each other, mapping mouse chromosomes
Radioactive
In Situ Hybridization
of Chromosomes
157
is an important application of the in situ hybridization technique. A method (13) suitable for this purpose 1soutlined below Dissect out the mousespleen using aseptic techniques. Cut up the tissue and passthrough a sieve into me&urn. Set up culturesfrom thesespleenlymphocytes at 4 x 106cells/ml (one spleenhasapprox lo8 cells) in RPMI 1640/10%FCS/HEPES/ antibiotics and concanavalmA (Sigma) at 3 pg/mL to induce mitotic activity. After culturing for 2-3 d at 37”C, add 400 pg/mL of BrdU and continue incubation for a further 17 h Wash cells asin Section 3.2., step4, and incubate for a further 4-5 h at 37°C in the presenceof 10e5A4 thymiclme Add Colcenud (0 5 pg/mL) 15-30mm before harvesting asdescribedin Section 3.2 , steps8-17. All proceduresafter the addition of BrdU shouldbe carried out m the darkenedalcove
Acknowledgments This work was supported by the Nattonal Health and Medical Research Council of Australia and the Jack Brockhoff Foundation.
References 1 Choo, K. H. Vissel B , Brown R , Fllby R. G., and Earle E. (1988) Homologousalpha satellitesequences on humanacrocentrlcchromosomes with selectivity for chromosomes 13, 14and21. Imphcatronsfor recombmatlonbetweennonhomologues andRobertsoman translocatlonsNucleicActds Res 16, 1273-l 284 2 Choo,K H , Vessel,B., andEarle, E. (1989)Evolution of alphasatelliteDNA on human acrocentrlcchromosomesGenomrcs $332-344. 3. Choo,K H , Brown, R., Webb, G , Craig, I , andRlby, R G (1987)Genomlcorgamsatlon of humancentromerlcalphasatelhteDNA: Characterlzatlonof a chromosome17 alphasatellitesequenceDNA. J. Molec Btol. 6,297-305 4 Choo,K H , Earle,E., andMcQulllan, C. (1990)A homologoussubfamilyof satellite III DNA on humanchromosomes14 and22. Nucleic Actds. Res 18,5641-5648 5. Choo, K. H A , Earle,E , Vessel,B , and Kahtsis,P (1992)A chromosome16specific humansatellite III DNA subfamilythat showsvariable presenceon different chromosomes14 Am J. Hum. Gene& 50,706-716. 6 Earle, E , Shaffer, L. G , Kalitsls,P , McQuillan, C , Dale,S , andChooK H A (1992) Identlficatlonof DNA sequences flankingthebreakpointof humant(14q21q)Robertsoman translocationsAm J Hum. Genet 50,717-724. 7. Kahtsis,P., Earle,E , Vessel,B., Shaffer,L G , McQuillan, C , andChooK. H A. (1993) A chromosome13specifichumansatelliteI DNA subfamilywith mmorpresence on chromosome21 Further studieson Robertsoman translocationsGenomrcs 17, 104-l 12. 8 Buckle, V. J andCraig, I. W (1986).In situ hybridization, m Human Genetic Diseases* A Practical Approach (Davies,K., ed.), IRL, Oxford, UK, pp. 85-100 9. Choo,K. H. A., Brown, R., andEarle,E. (1991)In situ hybrldlzatlonof chromosomes, m Methods in Molecular Btology, vol 9: Protocols in Human Molecular Genetics (Mathew, C , ed.), Humana,Clifton, NJ, pp. 233-254 10 Zabel, B. U , Naylor, S L., Sakaguchl,A Y , Bell, G I , and Shows,T B. (1983)High resolutionchromosomallocahzatlonof humangenesfor amylase,prooplomelanocortm, somatostatin,anda DNA fragment(D351)by In situ hybridization.Proc. Nat1 Acad. Scr USA 80,6932-6936
Earle
and Choo
11. Brown, R. M., Dahl, H -H M , and Brown, G K. (1989) X-chromosome locahsatron of the functronal gene for the El alpha subunit of the human pyruvate dehydrogenase complex. Genomics 4, 174-18 1. 12 Brown, G K., Brown, R M , Scholem, R D , Kirby, D. M., and Dahl, H.-H M (1989) The clnucal and biochemrcal spectrum of human pyruvate dehydrogenase deficiency. Ann NYAcad. Sci 573,360-368. 13 Webb, G. C., Lee, J. F , Campbell, H. D , and Young, I G (1989) Haemopoietic growth factor gene IL3 and IL4 mapped to the same locus on mouse chromosome 11, Cytogenet Cell Genet. 50, 107-l 10
CHAPTER 15
Gene Mapping Using 3H-Labeled Heterologous Probes Pino Maccarone, Stephen A. Wilcox, Jaclyn M. Watson, and Jennifer A. Marshall-Graves 1. Introduction In situ hybridization is a technique whereby a labeled DNA probe is hybridized directly to denaturated metaphase chromosomes fixed on a microscope slide. The cloned probe, labeled by a radioactive or fluorescent tag, hybridizes specifically to the single-stranded sequence(s) in the genome, and the location of the gene or sequence of interest on the chromosome is visualized by autoradiography or fluorography. Here we will discuss only radioactive in situ hybridization. The method has been used extensively m conlunction with Southern analysis of hybrid panels and linkage analysis to both confirm and construct physical maps of human and mouse chromosomes, using cloned human or mouse genes homologous to the target sequence. However, much comparative mapping may be accomplished without the necessity of cloning each gene. Thus it is possible to construct physical genetic maps for any mammalian species without the time-consuming process of cloning the homologous sequences. The DNA coding sequences of homologous genes in different species, as defined by O’Brien and Graves (I), are frequently highly conserved between both closely and even distantly related mammalian speciesas a consequence of a) functional constraints on sequence divergence, and b) the time elapsed since the species diverged. The degree of sequence conservation of a specific gene of interest between different species can be assessedby probing Southern blots containing genomic DNA from the various species (zoo blots) with a cDNA probe cloned from one of the species. Many cDNA clones from human and mouse are currently available for gene mapping studies. If the sequence is demonstrated to be highly or moderately conserved between species, it is possible to use the heterologous DNA clone to map the sequence to the chromosomes of even distantly related species.We have routinely used human and mouse probes to localize genes m marsupial (metatherian) and monotreme (prototherians) From Ed&d
Mefhods N) Molecular S!o/ogy, Vol 33 In Situ Hybr~dmtron Protocols by K H A Choo Copynght Q 1994 Humana Press Inc , Totowa, NJ
159
Maccarone
160
et al.
mammals (which diverged from the Eutheria 130 and 170 million years ago, respectively). The comparison of genetic maps between eutherian, marsupial, and monotreme mammals has already permitted us to test a number of hypotheses concerning the evolution of mammalian sex chromosomes (2) and autosomes during mammalian evolution (3). Thus chapter provides a detailed description of a radroactive in situ hybrtd-
lzation procedure using heterologous DNA probes to marsupial chromosomes. The procedure can be readily adapted to map homologous gene loci to the chromosomes
of any mammalran
species. Problems
that may be encountered,
and their solution, will be discussed. 2. Materials 2.1. Chromosome Preparations 1. Phosphate buffered saline (PBS). 0.14M sodium chloride (NaCl), 3mM potassium chloride (KCl), 1 mM calcium chloride (CaC12), 2 mM magnesium sulfate (MgSOJ, 2 mM potassium drhydrogen orthophosphate (KHzPOJ, 3mM drsodrum hydrogen orthophosphate (Na,HP04), and 0.002% phenol red 2. Trypsin versine (TV)* 0.1% trypsm powder and 0.1% ethylenediaminetetraacetrc acid tetrasodium salt (EDTA), m PBS. 3. Colcemrd (Sigma, St. Louis, MO): 10 mg/mL in PBS Store at 4’C 4. Fixative. 3: 1 mix of methanol and glacial acetic acid. Make fresh on the day of use. 5 0.05MKCl 6. 0. IM hydrochlorrc acid (HCl). 7. Ethanol (50, 70, and 100%). 8. RNase A. Remove contaminating DNase by heatmg at 100°C for 15 mm and allowing to cool prror to storage at -20°C 9. 2X SSC. 20X SSC stock comprises 3M sodium chloride and 0 3M sodium citrate, pH 7.0 10. Slide rack holders. 11. Gauze pads. 12 Diamond tipped pencil. 13. lo-mL (2X) and 50-mL (IX) centrifuge tubes. 14. 37°C incubator. 15. Slides and coverslips. Grease, dust, and residual chemicals present on both slides and coverslips are capable of mterfermg with the hybridization of the cDNA probe(s) to the chromosomes, resulting m either a lack of signal or false-positive. Soak the slides and coverslips in O.lM HCl for 48 h, rinse under running tap water for 2 h, air-dry, then dehydrate in 70% ethanol for 5 min followed by 5 min in 100% ethanol. Store the slides in a dust-free environment at room temperature, and the coverslips in absolute ethanol at 4°C. Prior to use, wipe the slides with gauze to remove any residual oily films that may be present. Siltcomze the coverslips by dipping in Coatasrl (Ajax Chemicals, Auburn, Australia) and leaving uprrght to dry at room temperature (Warning: Coatasil contams dimethyldrchlorosrlane, which is a toxic and highly volatrle compound. Avoid breathing m the vapors. Use only m a fume hood.)
Gene Mapping
1 2. 3. 4. 5. 6 1. 2.
3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18.
in Divergent
161
Mammals
2.2. Removal of Endogenous RNA 100 l.tg/mL of RNase A. 2X SSC, pH 7.0. Ethanol (50, 70, and 100%). Decor box. These are plastic containers with tight-fitting lids that prevent any significant loss of moisture from the atmosphere within the container. Larger contamers (- 250 mm x 200 mm x 100 mm) are more manageable than smaller ones. Paper towelling. 37°C incubator. 2.3. Preparation of Radioactive Probes [3H]d-CTP, 50-85Ci/mmol, [3H]d-GTP, 25-50 Ci/mmol, [3H]d-ATP, 50-100 Ci/ mmol; dTTP 300 mM. Enzyme solution, 10 pg/ul DNaseI and 0.5U DNA polymerase I. All the tritiated nucleottdes and enzyme solution components may be bought Individually, however, various nick-translation ktts (e.g., Amersham, Arlington Herghts, IL) have proven highly reliable in their ability to label cDNA probes. Distilled HzO. 0.5M Ethylenediaminetetra-acetic acid disodmm salt (EDTA), pH 8 0. 10% Sodium dodecyl sulfate (SDS). 10 mg/mL Bovine serum albumin (BSA) 10% Trichloroacetic acid (TCA). Scintillation liquid number 5. Prepare by dissolving 15 g PPO, 1 5 g POPOP in 2 5 L of toluene in a fume hood. 2 mg/mL of sonicated salmon sperm DNA. 3M Sodium acetate. Ethanol (100%). Eppendorf tubes (2). Wasserman tubes (2). Pasteur pipets (2) Scmtillation vials (8). Glass-fiber filter-GFK (Whatman). Scintillation counter. Sephadex G50. Prepare by hydrating 1 g of Sephadex G50 m 20 mL of 10 mM Tris-HCV0.1 mM EDTA, pH 7.5. Autoclave and store at 4’C. 2.4. Chromosome
Denaturation
1. Dry ice. 2. Ethanol (70 and 100%) 3. 70% Formamide. Deionize ultra-pure formamide with a mixed-bed ion exchange resin (5 g/100 mL) in a beaker completely covered m aluminum foil. Stir overnight. The following day, filter the formamide twtce through Whatman number 1 filter paper and either use it that same day or store it overnight at -20°C (Warning: Formamide is a known carcinogen Carry out all steps involving formamtde in a fume hood ) 4. Water bath 5. Coplin staining Jars (2).
Maccarone et al.
162
2.5. Hybridization 1 Probe cocktail mixture: 50% (purified) formamide, 10% dextran sulfate, and a final concentration of 2X SSCP. Make in bulk and store at -20°C. Stable for at least 12 mo. 10X SSCP comprises 1.2MNaCl,O.l5M trisodium citrate, and 0.2M sodium phosphate (approx 4 vol of 0.2M Na2HP04, and 1 vol of 0 2M NaH,PO,.2H,O), pH 8 0. 2. 2X SSC, pH 7 0 3 37°C incubator 4. Heating block. 5. Rubber cement. 6. Decor boxes. 7. Paper towelling. 1.
2 3. 4 5
2.6. Posthybridization 50% (purified) formamide 2X SSC, pH 7 0. Ethanol (70 and 100%). Water bath. Slide rack holders
Treatment
2.7. Autoradiography 1. Amersham LM 1 nuclear track emulsion. Each batch of emulston should be carefully screened on at least two test shdes containmg metaphase chromosome preparations (see Section 3.7.) to ascertain whether the emulsion produces a sufficiently low background that is acceptable to allow the labeled chromosome preparations to be coated. Store at 4°C 2. Glycerol. 3 Distilled Hz0 4. Ilford Phenisol developer (Ilford Ltd., Mt Waverly, Australia) (diluted accordmg to the manufacturer’s instructions) 5 Ilford Rapid fixative (diluted accordmg to the manufacturer’s instructions) 6 3% Glacial acetic acid. 7 Giemsa stain (BDH Pharmaceuticals, London, UK) 8 Gurr’s buffer (BDH Chemicals). 9 Whatman number 54 filter paper (Whatman International, Maidstone, UK). 10 Darkroom, with red safehght 11. Water bath. Any indicator lights present on the water bath are to be completely sealed over with alummum foil to prevent any light from bemg emitted. Any light that is emitted will adversely affect the LM 1 nuclear track emulsion, rendering rt unsuitable for use.
3. Methods 3.1. Chromosome
Preparations
In order to locate cloned genes to metaphase chromosomes by in situ hybridization it is essential to have: a) a high mltotic index, thus requiring fewer slides, less emulsion, and permitting less tedious scoring; b) no background
Gene Mapping
in Divergent
Mammals
163
cytoplasm; and c) well-spaced chromosomes with clear morphology. In our laboratory we use diploid fibroblast cell lines derived from embryos or adult skin, or cell hybrids contammg the chromosome of interest. Marsupial (and, to a lesser extent, monotreme) karyotypes are ideal for in situ hybridization, owing to their low diploid number and to the fact that their individual chromosomes are easily identifiable, without the necessity for them to be banded (Fig. 1). 1. Grow cells until flasks are approx 70-80% confluent 2 Add Colcemid to a final concentration of 0 0002-0.0005% to the cells, for a period ranging from 30 min to 16 h depending on the rate of cell growth. 3 Mitotic cells may be concentrated by washing off the monolayer as follows. a. After gentle tapping of the flask, remove the media from the cell culture flasks and place it in a IO-mL centrifuge tube. b. Wash the cells once with 1 mL of PBS, by pipetmg the PBS over the cells several times. c. Remove the PBS and place it in the centrifuge tube, with the media Cells that are arrested at metaphase will be dislodged from the cell culture flask, while cells that remain attached are still viable and may still be mamtained and reused in culture by the addition of the appropriate media d. Centrifuge for 10 min at 1000 rpm to pellet the cells. e. Discard the supernatant, wash the cells twice with PBS, and pellet as above 4. Resuspend the cells in 2 mL of 0.05M KCl, added dropwise from a Pasteur pipet. The optimal time for hypotonic treatment is dependent upon the cell lme used. Generally we have found that 12 to 18 min at 37°C IS sufficient. 5. Add 2 mL of fixative to the suspension and centrifuge for 10 mm at 1500 rpm. 6 Resuspend the cells m 2 mL of fixative and centrifuge; repeat this step 7. Resuspend the cells in 1 mL of fixative and allow 1 drop to fall from a Pasteur pipet onto a cleaned mmroscope slide from a height of approx 10 cm 8. Stain the chromosome preparations wtth 10% filtered Giemsa stain and examine under the microscope (see Note 1). 9. Store the chromosome preparations, either by placing in the fixative at -20°C (see Note 2) or dropping them onto microscope slides. 10. Mark the positron of the drop on the mrcroscope slides with a diamond-tipped pencil, in order to locate the cells during the hybridization procedure.
3.2. Removal of Endogenous RNA RNA effectively competes with the chromosomal DNA for the binding sites of the labeled probe, resultmg in an increase m the noise level and a significant reduction or elimination of any signal that may have been detected. Native RNA present within the chromosome preparations therefore needs to be removed prior to hybridization with the labeled probe. 1 Add 200 pL of a 100 pg/mL solution of RNase A to each &de, duectly over the marked position of the drop of the cell suspension 2. Cover the chromosome preparations with a cleaned coverslip (40 x 22 mm). 3. Place absorbent paper towelling at the bottom of a decor box and saturate rt with distilled HzO. Drain off any excess distilled H,O.
164
Maccarone et al.
Fig. 1. The karyotype of the marsupial Sminthopsis macroura is well suited to in situ hybridization owing to its low diploid number (2n = 14), and chromosomes which are easily identifiable without the necessity for banding. Chromosome 3q (arrow) is labeled after in situ hybridization with a probe for the mouse interferon a receptor gene (INFAR). 4. For the remainder of the procedure the slides can be handled with gloved fingers.
Place the slides in the decor box, close the box and make sure it is airtight, and place it at 37°C for 1 h. 5. Remove the slides from the incubator, and displace the coverslips by dipping the slides in a Coplin jar containing 2X SSC. 6. Place the slides in a slide rack, and place in 2X SSC at room temperature for 2 min with slight agitation. 7. Treat the slides a further three times with 2X SSC as described above.
Gene Mapping
in Divergent
Mammals
165
8. After the final wash m 2X SSC, rinse the shdes in 50% ethanol. 9. Place the shdes in 70% ethanol for 2 mm and then in 100% ethanol for a further 2 mm. 10 Allow the slides to air-dry.
of Probes The labeling of cDNA probes by nick translation produces randomly cleaved, radioactively labeled DNA molecules. Once these molecules are denatured, a portion of one DNA molecule is capable of reannealing with the complementary region of another DNA molecule; thereby a network composed of DNA molecules that contain partial single-stranded regions that reanneal with the complementary sequencesof other DNA molecules is created (4). The larger the DNA molecule to be labeled, the more extensive the netwoking. By labeling the cloned DNA fragment together with the vector that it has been cloned into, a more extensive network is created, generating a more intense signal at the sateof hybridization on the chromosomes (5). 3.3. Labeling
1 Ahquot 20 l.rL of [3H]d-CTP, 20 PL of [3H]d-GTP, and 40 PL of [3H]d-ATP into a 1.5mL Eppendorf tube and dry down m a SpeedVac for approx 2 h. 2. In order to redissolve the nucleotides, add to the dried nucleotides a vol of distilled Hz0 that will produce a final vol of 25 pL, vortex, and centrifuge at maxrmum speed for 5 s. 3. Add 5 PL of d-TTP, vortex, and centrifuge as before. 4. Add 250 ng of probe DNA, vortex, and centrifuge as before. 5. Add 5 l.tL of enzyme solution and stir with the end of the mmropipet. Do not vortex. 6. Incubate the reaction at 15°C for 2 l/2 h. 7 Add 2.5 pL of 0 5M EDTA (pH 8.0) and 1 0 PL of 10% SDS to stop the reaction, vortex, centrifuge for 5 s, and place on ice. 8. TCA assay (see Note 3): a. Add 1 l.tL of the stopped reaction to a Wasserman tube b. Add 1 drop of 10 mg/mL solution of BSA from a Pasteur ptpet. c. Add 2 mL of me-cold 10% trichloroacetic acid (TCA), vortex for 5 s, and leave standing on ice for 10 min. d Filter the solution through a GF/C glass-fiber filter. Add a further 2 mL of TCA to the sides of the filter apparatus to wash through any radroacttve material that has attached to the filter apparatus. e. Dry the GFK glass-fiber filter m a 160°C oven for 15 min and place it in 5 mL of scintillation liquid number 5 f. Take a second l+tL sample from the the stopped reaction and spot it directly onto a second GF/C glass-fiber filter, allow to dry, and place it in 5 mL of scmtillation liquid number 5. g. Count both samples on a scintillation counter The sample that is spotted directly onto the GF/C glass-fiber filter will give the total radioactivity for the whole reactron,while the sample from the TCA assay will give the amount of label that has been incorporated into the probe.
166
Maccarone
et al.
9. Spm the remainder of the stopped reaction through a Sephadex G50 column: a Plug the base of a 1-mL syrmge with glass wool and fill it with Sephadex G50 b Add 100 pL of 2 mg/mL of somcated salmon sperm DNA to the column, as a preblockmg measure, to prevent any nucleic acids from bindmg to the Sephadexbeads c Wash the sonicated salmon sperm through the column with 200 l.tL of 10 mM Tris-HCl/O. 1 mM EDTA, pH 7 5, to remove any unbound DNA. d Place the column in a 10-r& centrifuge tube and centrifuge at 1000 rpm for 1 min. e. Discard the centrifuge tube and add the stopped reaction to the column. f. Add 200 l.tL of 10 mM Tris-HCl, 0.1 n-&f EDTA, pH 7 5, to the column. Place it in a new centrifuge tube and centrifuge at 1000 rpm for 1 mm 10 TCA assay the sample as previously described to determme the yield 11 Store at -20°C. 3.4. Chromosome
Denaturation
To allow hybrtdrzatron of the probe to its complementary sequences present m the chromosomes, the chromosomes are denatured m the presence of formamide. The formamide effectively lowers the temperature that IS required to denature the chromosomes (see Note 4). 1. Heat 45 mL of denaturation solution comprising 70% formamide in 2X SSC (pH 7 0 ) in a 70°C water bath. Cover completely with aluminum foil 2. Place the chromosome preparations in the denaturation solution and leave for 2 mm (or the optimal time determined, see Note 4) 3 Place the chromosome preparations in 70% ethanol and then 100% ethanol for 1 mm each. Encase the Coplm jars in dry-ice to maintain the the temperature at approx -2O’C 4 Place the chromosome preparations in a shde rack and allow to an-dry. 3.5. Hybridization
The annealmg of the probe DNA to the chromosomal DNA 1s dependent on the salt concentration of the hybridization solution, the temperature at which the annealing process occurs, and the concentration of the probe DNA (see Note 5). 1 Add 14 pL of the probe cocktail solution to an Eppendorf tube for each shde that is to be hybridized This should comprise 70% of the final hybridization solution (When preparing the hybridization mix solution, allow for 20 l.rL to be applied to each slide of chromosome preparations, see step 7, below.) 2 Add the labeled probe DNA so that the final probe concentrations will range from 0.05 ng&L to 0.3 ng/l.tL. 3 Add distilled Hz0 to give the correct probe concentrations. 4. Puncture a hole in the lid of the Eppendorf tube and heat at 100°C for 5 mm. 5. Immediately place the Eppendorf tubes on ice until the hybridization solution is ready to be applied to the chromosome preparations. 6 Immediately prior to application, vortex the hybridization solution briefly and centrifuge at 12,000 rpm for 5 s
Gene Mapprng
in Divergent
167
Mammals
7. Add 20 pL of the hybrrdrzatton solution to each slide, in the marked region 8 Gently lower the silrconized coverslips onto the hybridtzation solution, over the chromosome prepartrons 9. Seal the coverslips with an abundance of rubber cement. Applying a large excess of the rubber cement allows the coverslips to be removed with mmtmum effort after the hybridization 10. Place absorbent paper towelling at the bottom of a decor box and saturate it with distilled HzO. Drain off any excess distilled HZ0 11 Place the slides m the decor box, close the box, and ensure that it 1s airtight. 12 Incubate the slides at 37°C for 16 h. We have found that increasing the time of hybridization above this only increases the noise level.
3.6. Posthybridization
Treatment
1 Remove the rubber cement and the coverslips from the slides with a pair of forceps and discard them in a tritium waste bin, as the coverslips will be radroacttve. 2. Place the slides in a slrde rack 3. Wash the slides, with stirring, in 2 L of a 2X SSC solution for 10 min at room temperature. 4 Wash the slides in three changes of 50% purified formamide/2X SSC at 41 ‘C for 10 mm each. 5. Wash the slides, with stirring, in 2 L of 2X SSC at room temperature for 10 min. 6. Dehydrate the chromosome preparations by placing the slides in 70% and then 100% ethanol at room temperature for 2 mm each 7. Allow the slides to air-dry Slides can be tmmedtately autoradrographed, or may be stored for up to several weeks in a dust-free environment at room temperature, with no loss of signal (due to the relatively long half-life of trttium)
3.7. Autoradiography Though the LM 1 nuclear track emulsion has proven a suitable emulsion for the use in in situ hybrrdizatton, different batches of emulsron produce drffermg degrees of background. Therefore, each new batch of emulsion should be tested on two test slides containing unhybridized chromosome preparations. If the emulsion is not suitable for use, it should be returned immediately to the manufacturer (see Note 6). Testing of the emulsion and procedure for autoradiography are as follows: 1. In a darkroom containing a red safelight, set the temperature of the water bath to 43OC. 2. Place the bottle of Amersham LM 1 nuclear track emulsion m the water bath and leave for 30 mm until the emulsion has melted. Any emulston that is not used is to be stored at 4’C, m the dark 3. Add glycerol to a 50-mL Corning tube, calculated to make a final concentration of 0 5%. 4. Add 31.5 mL of distilled Hz0 5. Add 18 mL of the melted emulsion and mix gently by inverting three times. 6. Dip a test slide into the emulsion for several seconds and allow to dry for 1 h
Maccarone
et al.
a. b. c. d.
7
8.
9.
10.
11. 12.
13
Place the slides in Ilford Phenisol developer for 4 min at room temperature. Rinse the shdes in 3% glactal acetic acid for 10 s. Place the slides in Ilford Rapid fixative for 4 min Place the slides m a water bath under running tap water for 10 to 15 min and allow to air-dry. To stain the chromosomes, make up a solution of 10% Gtemsa stain diluted in Gurr’s buffer. Filter through a Whatman number 1 filter, and with the aide of a Pasteur pipet, apply 2 mL of the stain directly to the drted test slides After 8 min, wash the stain off the slides with tap water, allow to atrdry, and then examine Once the suitability of the emulsion has been ascertained, dip the hybridized slides into the Corning tube containing the emulsion mixture For convenience, handle the slides with gloved fingers Allow the slides to dry m darkness, by placing them in a cupboard in the darkroom for approx 1 h. This ensures that the emulsion is not exposed to any light when one is entering and leaving the darkroom. Once dry, place the slides in a black slide box with desiccant, seal all the sides of the box with black electric tape, and store tn a black plastic film bag. Store the slides for 4 to 6 wk at 4°C. Develop one slide and stain as described for the test slides. If there 1s sufficient label, that is, if silver grams are present on individual chromosomes, develop and stain all the slides. Score and analyze distribution of grains on chromosomes (see Note 7)
See Notes 8-10 for a discussion of a number of practical problems that can lead to the nonlocalizatlon of various genes. 4. Notes 1. Examine the slides under 100x magnification for the cell denstty, under 400x magnification for the mitotic index, and under 4000x for the absence of cytoplasm and the morphology of the chromosomes. Contracted chromosome preparations that make it difficult to dtstinguish individual chromosomes should be avoided, as well as chromosomes that overlay one another, since a single gram located on or near this overlay will not be able to be assigned to an individual chromosome. Ideally, there should be approx 3 chromosome preparations visible in the field of view under the 100x magmfication. It is possible to adJUst the cell density accordmgly, as follows. a. Centrifuge the cells for 10 mm at 15OOg, b. Discard the supernatant, and add an amount of fixative that will either concentrate or dilute the cell density, as estimated from the test slide; and c. Place a single drop of the cell suspension onto a shde, stain, and examine as described above. 2. Although the chromosome preparations may be stored at -2O”C, background cytoplasm and cell clumpmg tend to mcrease during storage, possibly owing to the level of water in the fixative. Therefore, it is best to avoid storing the cells in IL.. I?..._^.___^c----.. - __._..2-J -_..:--I -c I...-
Gene Mapping
in Divergent
Mammals
169
3 This step mvolves determining the amount of radioactivity that has been mcorporated into the probe by performing a trichloroacetic acid (TCA) assay The TCA assay allows the separation of the radioactive oligomerrc nucleic acids from the radioactive nucleotrdes and nucleosides. Oligonucleottdes greater than 20 nucleottdes in length are collected on a GF/C glass-fiber filter, while those of a shorter length are washed through. 4. Each batch of formamrde needs to be tested prior to use to determine a) the time the chromosome preparations are left in the formamide (denaturatron) solution, and b) its abrlity to allow the chromosomes to be stained. The testing is carried out by taking 2 test shdes through the denaturation procedure and then stammg them with Giemsa The time the chromosome preparations are left m the denaturation solution is critical. Too short a pertod will not allow sufficient time for the chromosomes to be denatured, whereas too long a period will adversely affect the morphology of the chromosomes, thus preventing the probe DNA from annealing The optrmal time the chromosomes are left in the denaturatron solutron may vary between different species; however, we have found that 2 min IS generally adequate for a wide range of eutherran, marsupial, and monotreme species. The optimal time IS just prior to when the denaturatton solution adversely affects the morphology of the chromosomes. As the denaturation solution consists of formamrde, which contains ammonmm compounds that are capable of adversely affecting the morphology of the chromosomes, it is essential that the denaturation solution is mamtamed at pH 7.0, to overcome the effects of the ammonium compounds (6) 5. The presence of low salt and high temperatures favors accurate base parrmg, and IS applied when usmg homologous probes. With heterologous probes, the strmgency of the hybridrzation conditions is relaxed, to compensate for the differences between the sequences of the probe DNA and the chromosomal DNA. As less accurate base pairing is favored by the conditions applied to the heterologous probes, the stgnal that IS obtained is weak in comparison to homologous probes (Fig. 2). This means that the labeled chromosome preparations are exposed to the nuclear track emulsion for an extended perrod of time, thereby also elevating the noise level. The requirement for high temperatures for hybridization is offset by the use of formamide, which effectively lowers the annealing temperature. The addition of dextran sulfate to the hybridization solution also increases the annealing rate between the probe and chromosomal DNAs by reducing the effective volume available to the probe DNA in solution, therefore increasing the concentration of the probe DNA (4). The concentration of DNA at which the optimal signal-to-noise ratio IS obtained varies from probe to probe for various reasons, such as the type and size of the gene probe and the specific activity of the probe; thus a series of probe concentrations, rangmg from 0 05 ng/pL to 0.3 ng/pL, are applied to different chromosomal preparations. Generally, 2 to 3 slides at the separate concentrations are sufficient to obtain enough chromosome preparatrons that will generate a signal. 6. As the emulsion has a tendency to spoil over time, tt should also be tested on 2 test slides, on each occasion prior to slides being coated. The test shdes are exam-
170
Maccarone
IA ml ::i.. ... :. ... 3 : :: .:...... ...... .......... Ez-
3
1P
lq
et al.
I
.:: ::: ::: ::: .. . .:.. ::: : ::::::::. ... .. .. .. .. .. .. .. .. .. .. 1 LX 3P 3q
:. ::::i.:: . . . . . . . . :.::!I .. . . . .
cx
l
:
::...
. : . 00
:::::
J
4P 49 SP 5q 6q 6~ XY
3 3
: B :. &:,:.-:i* : :ii :g**: ii;* : ‘: ‘**** .. .. .. .. .. .. .. .. .. . . .::...............::::::.::. ..* . . . . . . . . . -~oooo s-m 6p 6q 3/4p3/4q sp sq IP lq 2P 2q CHROMOSOMES
,:
:
i::
7 XpXq Y
Fig. 2. Grain distrlbutlonover the chromosomes of the marsupialspeciesS naacroura (A) andMacropus eugenrr (B), after tn situhybrldlzation with the mouseinterferona receptorgene (INFAR) probe The useof heterologousprobesgenerateshigh noiselevelsm relation to the signalobtamed,whencomparedwith homologousprobesThe high noiselevels are directly attributableto the differencesm the basecomposltlonof the probeDNA andthe chromosomal DNA ined under 4000x magnification for the presenceof sliver grains. If an average of fewer than 3 gramsare visible in the field of view, then the emulsion 1ssuitable If background is too high, do not use the emulsion. A fresh batch should be opened and its quality examined 7. The major inherent problem when using heterologousprobes for in situ hybndization is the signal-to-noise ratio that results from the moderation of the stringency conditions. The useof radioactive probes and the liquid emulsion to detect its disintegration also leadsto the presenceof background radiation that exposes the emulsion, thereby lowermg the signal-to-noise ratio. To overcome this problem, a statistical analysis was devised to detect if any region of a chromosome was significantly overlabeled The test comprises the one-tailed Z,, test (7), which allows the target genometo be broken down to any number of segments.It then tests the overall distribution of grains for departure from randomnessand identifies any significantly overlabeled segment.The Z,, test can then be usedto determine whether there are any minor sitesof hybridization within the genome 8. Excessive noise level. This is the major problem encountered its effect is to dramatlcally decreasethe probability of obtaining a signal, as the signal becomes diminished amid the noise. There are a number of causesfor excessive noise level: a. The emulsion usedmay be a source of noise. On occasions,a batch of emulsion that is of a substandardquality may be obtained, whereby silver grains develop through a nonradioactive process that are indistinguishable from
Gene Mapping
in Dtvergent
Mammals
171
those that develop through the release of energy from the radiolabeled probe. The problem with such emulsions is avoidable by examining the quality of the emulsion prtor to use, as described in Section 3.7. b. Failure to properly clean or store the slides allows residual chemicals and dust particles to remain and further accumulate on the slides During the period that the probe and chromosomal DNA are allowed to hybridize, the probe is able to stick to the dust particles on the slide, thus increasing the relative noise level. c. Improper autoradiographic technique tends to result m the productton of silver grains caused by a nonradioactive process This is due to exposure of the emulsion to reducing agents, heat, or light that react with the srlver hahde withm the emulsion, resulting m the development of silver grains (8). All equipment that is used for autoradiographic purposes should be thoroughly cleaned prior to use and should only be used for the specific purpose of autoradiography, so as to avoid contamination by products that may interfere with the autoradiographic process. Adherence to correct autoradtographic technique will keep the noise generated from nonradioactive processes to a mimmum. d. Only a limited number of sites are available for the probe to hybridize to the chromosomal DNA. These sites are filled within the first few hours of hybridtzauon, though the process 1sallowed to continue for several hours more, with no adverse effects (6). However, we have have found that extending the time beyond that recommended in Section 3 5 results in a clustermg of the silver grains throughout the chromosome preparations, making analysis impractical. e. Native RNA located within a cell is able to reduce the efficiency with which the probe is able to hybridtze with the chromosomal DNA. Thts is due to the native RNA competing with the chromosomal DNA for the binding sites of the probe. The effictency IS further reduced if the gene being localized is transcriptionally active. Therefore, failure to effectively remove the native RNA from the chromosome preparations will inhibit efforts to localize genes The main cause of not removing the native RNA is a loss of activity of the RNase A over time. This is caused through continued freezing and thawing of the enzyme 9 Overstainmg of the chromosomes can result in those silver grains overlying a chromosome not being detected, as the intensity of the stain will mask the grains The recommended time of 8 min, as stated in Section 3.7., should only be used as a starting point, as different chromosome preparations will stain with varying degrees of intensity. Therefore, after each batch of slides has been developed, a single slide should be stained for the 8 min and the remaining slides stained for the appropriate duration, as determined by the intensity of the stammg of the test slide. Understaming of chromosomes does not necessarily create a problem, as individual chromosomes can still be identified. 10 The degree of conservation of the DNA sequence of the gene of interest and that of the probe being used to detect it will determine whether a signal will be obtamed through the in situ hybridization process. If a probe 1sable to produce a signal on a Southern blot, with the appropriate genomic DNA, then that probe can be used to localize the homolog in the species being examined If a probe is unable to produce a signal on a Southern blot, then that probe ~111not be suttable for in SW
172
Maccarone et al. hybridization purposes. Owing to differences in the DNA sequences that exist between the probe and its homolog in separate species from which the gene is cloned, the stringency of the hybridization process and those of the washes are reduced, in comparrson to that when homologous probes are used. As a result of these relaxations, whtch favor less accurate base patrmg, the overall signal-tonoise ratro is weaker in comparison to the use of homologous probes. In many cases, increasing the stringency of the hybrrdizatron and washing conditions will not yield a srgnal rf the level of divergence between the probe DNA and chromosomal DNA 1s sufficiently high.
References 1 O’Brien, S J and Graves, J A M. (1991) Report of the committee on comparative gene mapping. Cyrogenet Cell Genet 58, 1124-l 151 2. Graves,J. A M. andWatson,J. M. (1991)Mammaliansex chromosomes: Evolution of organizationandfunctton. Chromosoma 101,3-68 3 Maccarone,P , Watson,J M , Francrs,D , Selwood,L , Kola, I , and Graves,J A. M. (1992)The evolution of humanchromosome 21 Evidencefrom m situ hybridizatton m marsupialsanda monotremeGenomlcs 13, 1119-I 124 4. Wahl, G. M , Stern,M , andStark,G. R (1979)Efficient transferof largeDNA fragments from agarosegelsto diazobenzyloxymethyl-paperandrapid hybridization by usingdextran sulfate Proc. Nat1 Acad Ser. 76,3683-3689. 5. Buckle, V J. andCraig,I W (1986)In situ hybridization, in HumanGenetcc Drseases* A Practical Approach (Davies,K , ed ), IRL, Oxford, UK, pp 85-100 6. Henderson,A. (1982) Cytological hybridization to mammalianchromosomes. Int Rev Cytol 76, 146
7. Ewens,W. J , Griffiths, R. C , Ethier, S N , Wilcox, S A , andGraves,J. A M. (1992) Statistical analysisof m situ hybridizatiom data*Dertvatton and useof the Z,,, test Genomics 12,675-682. 8 Rogers,W. (1982) Practical autoradtography Revrew 20, AmershamInternational, Buckinghamshire, England
CHAPTER 16
Dual-Label Fluorescence In Situ Hybridization Detection of Individual Chromosomes in Sperm Using Ejaculated Semen Judith H. Ford, Tie Lan Han, and Graham C. Webb 1. Introduction The development of chromosome-specific DNA a-satellite probes, chromosome paints and contigs, together with the refinement of fluorescence in situ hybridization (FISH) techniques, has added much to the power of the technique for the detectton of specific chromosomes in sperm. The technique has many uses, for example, screening for aneuploidy either at the base rate in untreated individuals or m those who have been exposed to cytotoxic chemicals and/or radtatton, exammmg the possible association between poor sperm morphology and chromosome abnormahty, observmg frequenctes of X and Y chromosomes to detect biases in sex chromosome frequency that might be naturally or artificially Induced. Previous studies of the risks of compromised reproductive outcome in mdividuals who have been accidentally or clmically exposed to cytotoxic agents, have used somatic tissues, especially peripheral blood, because of accesstbtlity and the capacity to induce cells to divide in vitro. However, it 1shighly desirable to perform such genetic analyses on the gametes themselves. Oocytes still present a problem of accessibility for routine assessment,but sperm are easily obtained and are present in very large numbers. The limitattons of sperm are that the cells are not dividing and the chromatm is in a highly condensed state. The hamster egg penetration technique was first described by Rudak et al. (I) as a means of observing sperm chromosomes. This technique has been used by several laboratories but is severely hmtted by its labor Intensiveness, the inability to score large numbers of cells, and the hkehhood that the results are biased by selectton of sperm that have the capacity to fertihze the hamster egg. This paper will describe the preparative steps for sperm and the subsequent FISH procedures that are necessary to achieve consistent labeling of single and From Edlted
Methods m Molecular Salogy, Vol 33 In SIIU Hybndrzalron Protocols by K H A Choo Copynght 0 1994 Humana Press Inc , Totowa, NJ
173
174
Ford, Han, and Webb
multiple chromosomes in sperm. All experiments described for sperm are controlled by applying the same probes to spreads of metaphase chromosomes. The techniques we used to make our metaphase control slides are quite standard and will not be described here. 2. Materials 1. Semen samples: Produced by masturbation, allowed to liquify at room temperature for at least 20 min 2. PBS* Phosphate buffered saline without Ca2+ and Mg2+ One liter contains 8 g NaCl, 200 mg KCl, 11.50 mg Na2HP04, 200 mg KH2P04, pH 7.4. 3 EDTA: Ethylenediaminetetraacetic acid. 4 DTT Dithiothreitol. 5 Carnoy fixative: methanol*glacial acetic acid (3: 1, v/v), freshly mixed. 6. Slides: With frosted end. Clean by soaking in 5% Decon-90 for at least 2 h, but no longer than 16 h Rinse well in flowing tap water, rinse once in distilled water, then three times m ethanol and dry. 7 HEPES-HTFM. HEPES buffered human tubal fluid medium (2) One liter contains 5080 mg NaCl, 320 mg KCl, 40 mg MgS04*7H20, 40 mg KH2P04, 280 mg CaC12+2H20, 2000 mg NaHCOs, 500 mg glucose, 30 mg Na pyruvate, 2035 mg Na lactate. Before using, add 100 U/mL Penicillin and 50 pg/mL streptomycin SO, 8. Graduated Pasteur pipet. Attach a I-mL syringe to a Pasteur pipet by means of plastic tubing 9. TRX probe: An X-chromosome specific probe, a gift from K. H A. Choo (3,4). TRX belongs to the a-satellite DNA family and was incorporated into pUC 9 plasmid. It is 400-bp long and recognizes 5000 copies of a sequence located m the centromeric region of the X chromosome. 10. TR17 probe: A chromosome 17-specific probe, a gift from K H. A. Choo (3-5) This probe belongs to the a-satellite DNA family and was incorporated into a pUC 9 plasmid. It is 1600-bp long and recognizes a sequence with 3000 copies located in the centromertc region of chromosome 17. 11 HRY probe. A Y-chromosome specific probe was the gift of K. Reed and K. Mattel who renamed it HRY after recloning from Amprobe RPN 1305X (Amersham, Arlington Hetghts, IL) mto pTZ 18m (BioRad, Richmond,CA). The sequence is identical to the HaeIII repeat in pHY2.1 orgmally isolated by Cooke et al (6) and described in detail by him (7). It is a 2.1-kb long sequence inserted mto PGEM2 plasmid and hybridizes to the Yq12 heterochromatic region on the long arm of the Y chromosome 12 Blotin-dATP: Biotm-7-deoxyadenosme triphosphate (BRL) 13. Nick-translation system (BRL). 14. BioNick labeling system: This would now supercede 12 and 13 above (BRL). 15. 3H-dATP (Amersham). 16 Dig-dUTP: Digoxygenm- 11 -deoxyuridine triphosphate included in a kit and incorporated into probes using random priming (Boehringer Mannheim, Mannheim, Germany). 17. 3H-dTTP (Amersham). 18 100 mg/mL RNase A in 2X SSC. Any reliable brand. Heat solutions to 100°C to inactivate contaminating DNases if necessary
Detection
of Chromosomes
in Sperm
175
19. 20X SSC: 3M NaCl, 0.3M sodium citrate, pH 7.0. Dilute to n X SSC accordingly; always maintain pH 7.0. 20. Ethanol. Analytical reagent (AR) grade, variously diluted wtth distilled HzO. 21. Deionized formamide: Mix approx 10 g of mixed bed resin beads (Bio-Rad, AR grade) with 500 mL of formamide, AR, for at least 2 h. Add more beads if the blue indicator color is lost. Store at -2O’C. 22. Slide denaturing solution: 70% formamide in 2X SSC: 28 mL of deionized formamide, 4 mL of 20X SSC, 8 mL of HzO, pH to 7.0. 23. Salmon sperm DNA: Any reliable brand, sheared or sonicated. 24 10X SSCP: 0.12M NaCl, 0.15M sodium citrate, 0 1M NaH2P04, 0 1M Na2HP04, pH 6.0. 25. Dextran sulfate (Pharmacra, Uppsala, Sweden). 26. Rubber cement: “Earth” brand (Marumi Industry Co. Ltd., Japan). 27. NFDM: Nonfat dried milk (any brand) 28. Tris-HCI: Tris[hydroxymethyl] aminomethane hydrochloride. 29. Tween-20: Polyoxyethylenesorbitan monolaurate. 30. Wash solution: 0 1M Tris-HCl, 0 15M NaCl, 0.05% Tween-20, pH 7 5 3 1. FITC-avidin: Fluorescein isothiocyanate conjugated avidin, cell sorter grade (DCS) (2 mg/mL; Vector Laboratories. Burlingame, CA). 32. Biotinylated goat antiavidin (0.5 mg/mL,