Nanostructured Materials for Electrochemical Energy Production and Storage
Nanostructure Science and Technology Series Editor: David J. Lockwood, FRSC National Research Council of Canada Ottawa, Ontario, Canada
For other titles published in this series, go to www.springer.com/series/6331
Edson Roberto Leite Editor
Nanostructured Materials for Electrochemical Energy Production and Storage
123
Edson Roberto Leite Universidade Federal de S˜ao Carlos Centro de Ciˆencias Exatas e de Tecnologia Caixa Postal 676 S˜ao Carlos-SP Brazil
[email protected]
Series Editor David J. Lockwood National Research Council of Canada Ottawa, Ontario Canada
ISBN: 978-0-387-49322-0 e-ISBN: 978-0-387-49323-7 DOI: 10.1007/978-0-387-49323-7 Library of Congress Control Number: 2008 941657 c Springer Science+Business Media, LLC 2009 ° All rights reserved. This work may not be translated or copied in whole or in part without the written permission of the publisher (Springer Science+Business Media, LLC, 233 Spring Street, New York, NY 10013, USA), except for brief excerpts in connection with reviews or scholarly analysis. Use in connection with any form of information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed is forbidden. The use in this publication of trade names, trademarks, service marks, and similar terms, even if they are not identified as such, is not to be taken as an expression of opinion as to whether or not they are subject to proprietary rights. Printed on acid-free paper springer.com
Preface
The major problem facing new energy conversion and storage technologies remains device efficiency. Projects based on nanostructured materials can yield improved performance in devices involving electrochemical reactions and heterogeneous catalysis, such as fuel and solar cells, batteries, etc. Nanoscale structures dramatically alter the surface reaction rates and electrical transport throughout the material, causing a dramatic improvement in energy storage, conversion, and generation. Furthermore, the design of nanoscale materials to be applied in alternative energy devices is a predictable way to develop a wide range of new technologies for a more sustainable future. Therefore, the goal of this book is to present basic fundamentals and the most relevant properties of nanostructured materials in order to improve alternative energy devices. This book begins with a chapter by Gr¨atzel summarizing the use of mesoscopic thin films and hybrid materials in the development of new kinds of regenerative photoelectrochemical devices. Applications include high-efficiency solar cells. In chapter two, Ribeiro and Leite describe assembly and properties of nanoparticles. The chapter presents a review on the properties and main features of nanoscale materials, emphasizing the dependence of key properties on size for energy purposes. A general description is also given of nanoparticle synthesization methods (mainly oxides), focusing on advances in tailoring controlled shape nanostructures. Bueno and Gabrielli present the basic principles of nanotechnology in general and integrate fundamental electrochemistry with nanostructured materials in particular. The main focus of this chapter, therefore, is on novel strategies that exploit nanoscale architectures to enhance the efficiency of alternative energy conversion and storage devices and on the basic principles of electrochemistry governing the effects of nanoscale structures on electrodes and electrolytes. Heinzel and K¨onig summarize the impact of nanostructured materials on fuel cell technology, mainly in the area of polymer electrolyte membrane fuel cells. This chapter illustrates how nanostructured materials can modify component performance such as electrocatalyst materials and membrane.
v
vi
Preface
Dong and Dunn describe advances resulting from the use of sol-gel technology on energy storage devices. This chapter reviews the importance of aerogel nanoarchitecture in achieving high performance electrochemical properties. Results obtained with vanadium oxide aerogels are highlighted as these materials exhibit a number of desirable characteristics for secondary lithium batteries. A chapter focusing on the use of nanocomposites in electrochemical devices is presented by Schoonman, Zavyalov, and Pivkina. A wide range of metal (metal oxide)/polymer nanocomposites has been synthesized using Al, Sn, Zn, Pd, and Ti as a metal source and poly-para-xylylene (PPX) as a polymeric matrix. The properties of the nanocomposites were studied by comparing structure, morphology, electrical properties, oxidation kinetics, and electrochemical parameters. As the rapid development of nanostructured materials continues, this book illustrates the impact of this class of materials on performance improvements of alternative energy devices, particularly those based on electrochemical processes. The authors make a powerful case for nanomaterials and nanotechnology as a way to transform such alternative energy sources into significant contributors to the future global energy mix.
Contents
Recent Applications of Nanoscale Materials: Solar Cells . . . . . . . . . . . . . . . Michael Gr¨atzel
1
Assembly and Properties of Nanoparticles . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Caue Ribeiro and Edson R. Leite Electrochemistry, Nanomaterials, and Nanostructures . . . . . . . . . . . . . . . . 81 Paulo Roberto Bueno and Claude Gabrielli Nanotechnology for Fuel Cells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151 Angelika Heinzel and Uwe K¨onig Vanadium Oxide Aerogels: Enhanced Energy Storage in Nanostructured Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185 Winny Dong and Bruce Dunn Nanostructured Composites: Structure, Properties, and Applications in Electrochemistry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201 Joop Schoonman, Sergey Zavyalov, and Alla Pivkina Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
vii
Contributors
Paulo Roberto Bueno, Instituto de Qu´ımica, Departamento de F´ısico-Qu´ımica, Universidade Estadual Paulista, C. Postal 355, 14801-907, Araraquara, S˜ao Paulo, Brazil,
[email protected] Winny Dong, Chemical and Materials Engineering, California State Polytechnic University, Pomona, CA 91768 Bruce Dunn, Department of Materials Science and Engineering, University of California, Los Angeles, CA 90095, USA,
[email protected] Claude Gabrielli, UPR 15 du CNRS, Physique des Liquides et Electrochimie, Universit´e Pierre et Marie Curie, 4 place Jussieu, 75252 Paris, France Michael Gr¨atzel, Laboratory of Photonics and Interfaces, Ecole Polytechnique F´ed´erale de Lausanne, CH-1015, Lausanne, Switzerland,
[email protected] Angelika Heinzel Centre for Fuel cell Technology (ZBT gGmbH), Carl-Benz-Str. 201, 47057 Duisburg, Germany Uwe K¨onig Centre for Fuel cell Technology (ZBT gGmbH), Carl-Benz-Str. 201, 47057 Duisburg, Germany Edson R. Leite, LIEC – Universidade Federal de S˜ao Carlos, Departamento de Qu´ımica, Rod. Washington Luiz, km 235 – 13565-905, S˜ao Carlos, SP, Brazil Alla Pivkina, Semenov Institute of Physical Chemistry, Russian Academy of Science, Kosygin st. 4, 119991, Moscow, Russia Caue Ribeiro, EMBRAPA Instrumentac¸a˜ o Agropecu´aria, Rua XV de Novembro, 1452 – 13560-970, CP 741, S˜ao Carlos, SP, Brazil Joop Schoonman, Delft University of Technology, Delft Institute for Sustainable Energy, P.O. Box 5045, 2600 GA Delft, The Netherlands,
[email protected] Sergey Zavyalov, Karpov Institute of Physical Chemistry, Vorontsovo Pole, 10, 103064 Moscow, Russia
ix
Recent Applications of Nanoscale Materials: Solar Cells Michael Gr¨atzel
Abstract Photovoltaic cells have been dominated so far by solid state p-n junction devices made from silicon or gallium arsenide wavers or thin film embodiments based on amorphous silicon, CdTe and copper indium gallium diselenide (CIGS) profiting from the experience and material availability of the semiconductor industry. Recently there has been a surge of interest for devices that are based on nanoscale inorganic or organic semiconductors commonly referred to as “bulk” junctions due to their interconnected three-dimensional structure. The present chapter describes the state of the art of the academic and industrial development of nanostructured solar cells, with emphasis in the development of the dye-sensitized nanocristalline solar cell.
1 Introduction Photovoltaic cells have been dominated so far by solid state p–n junction devices made from silicon or gallium arsenide wavers or thin film embodiments based on amorphous silicon, CdTe and copper indium gallium diselenide (CIGS) profiting from the experience and material availability of the semiconductor industry. Recently there has been a surge of interest for devices that are based on nanoscale inorganic or organic semiconductors commonly referred to as “bulk” junctions due to their interconnected three-dimensional structure. Research in this field has gained significant momentum with hundreds of groups being active to develop new mesoscopic solar cell variants and improve their performance. These devices are formed from junctions of, for example, nanocrystalline, inorganic oxides and chalcogenides or fullerenes with organic electrolytes, ionic liquids, or inorganic and organic hole conductors and conducting polymers, offering the prospect of very M. Gr¨atzel Laboratory of Photonics and Interfaces, Ecole Polytechnique F´ed´erale de Lausanne, CH-1015, Lausanne, Switzerland e-mail:
[email protected] E.R. Leite (ed.), Nanostructured Materials for Electrochemical Energy Production and Storage, Nanostructure Science and Technology, DOI 10.1007/978-0-387-49323-7 1, c Springer Science+Business Media LLC 2009
1
2
M. Gr¨atzel
low cost fabrication without expensive and energy-intensive high-temperature and high-vacuum processes. They are compatible with flexible substrates and a variety of embodiments and appearances to facilitate market entry, both for domestic devices and in architectural or decorative applications. Thus, it appears possible now to depart completely from the concept of classical, flat p–n junction cells to replace them with interpenetrating network junctions. The nanoscale morphology produces an interface with a huge area, endowing these systems with extraordinary optoelectronic properties. Despite their disordered structure these novel solar cells have shown strikingly high conversion efficiencies competing with those of conventional devices while at the same time offering advantages of ease of production, lower cost and shorter energy payback times. The first embodiment and prototype of this family of devices is the dye-sensitized solar cell (DSC), invented in the author’s laboratory at the Ecole Polytechnique F´ed´erale de Lausanne [1–3]. At the heart of the DSC is a mesoscopic film composed by, for example, nanoparticles, nanorods or nanotubes of a wide band gap semiconductor oxide (typically ZnO, SnO2 or TiO2 ) that is covered by a monolayer of sensitizer. During the illumination of the cell the photo-excited dye molecules adsorbed on the nanoparticle surface inject electrons into the conduction band of the oxide. The sensitizer is regenerated by hole injection into a redox electrolyte or a solid-state p-type conductor. Although many organic or inorganic sensitizers, including semiconductor quantum dots are known to date and their performance is rapidly improving, ruthenium poly-pyridyl complexes have maintained so far a lead as the most efficient and stable sensitizers. Published first in 1993 [4], cisRuL2 (SCN)2 (L = 2, 2 -bipyridyl-4,4 -dicarboxylic acid), coded N3 or N719 for the fully protonated or half protonated form, respectively, has become the paradigm of a charge transfer sensitizer capturing a large domain of the visible spectrum. The structure of the N3 dye is shown in Fig. 1.
Fig. 1 Structure of the N3 dye cis − RuL2 (SCN)2 (L = 2,2-bipyridyl-4,4 dicarbo-xylate). See Color Plates
Recent Applications of Nanoscale Materials: Solar Cells
3
Incident photon-to-electron conversion efficiencies (IPCEs) attaining almost unity have been obtained with this sensitizer in the wavelength range near its absorption maximum corresponding to quantum yields for electric current generation near 100% when light losses due to the conducting glass current collector are taken into account [4–8]. The DSC is the only solar cell that uses a molecule to absorb photons and convert them into electric charges without the need of excitonic transport. It also is the only photovoltaic device that separates the two functions of solar light harvesting and charge carrier transport, whereas conventional cells perform both operations simultaneously resulting in stringent demands on the purity of materials and much higher production costs. In the DSC, the molecular sensitizer or semiconductor quantum dot is placed at the interface between an electron and hole conducting material. Upon photo-excitation the negative charge carriers are injected by the excited dye into an electron (n) conductor and the positive charges in a hole (p) conductor or an electrolyte. Therefore, the electrons and holes are charges that move in different phases to the front and back contacts of the photocell. Their recombination occurs across the interface separating the electron and the hole conductor materials. The open circuit photo-voltage developed by the cell corresponds to the difference of the quasi-Fermi level of the electrons and holes in their respective transport medium. The great advantage of this cell configuration is that the solar energy conversion process involves only majority charge carriers. Electron and holes are generated in different phases and their recombination across the interface is blocked to a significant extent by the presence of the sensitizer. However, in order to harvest solar light efficiently, the use of a bulk or interpenetrating network junction of mesoscopic dimension is necessary since the optical cross section of a dye or QD is much smaller than the area it occupies. The challenge one faces with these systems is to make adequate provisions for contacting a large area of the junction by a suitable hole conductor or electrolyte in order to regenerate the sensitizer following lightinduced electron injection and conduct the positive carriers to the back contact of the photovoltaic cell. The validated solar to electric power conversion efficiency of the liquid electrolyte-based DSC stands currently at 11.1% under standard reporting conditions (AM1.5 global sunlight at 1,000 W/m2 intensity, 298 K temperature) [9] rendering it a credible alternative to conventional p–n junction photovoltaic devices. Solid-state DSC equivalents using organic hole conductors have reached over 5% efficiency with ruthenium-based sensitizers [10] and over 4% with organic dyes [11] whereas nanocomposite films composed of inorganic materials, such a TiO2 and CuInS2 have achieved efficiencies between 5 and 6% [12, 13]. New dyes showing increased optical cross sections and capable of absorbing longer wavelengths are currently under development. Similarly, the performance of mesoscopic TiO2 films employed as electron collectors is benefiting greatly from recent advances in nanomaterial research. Taking advantage of the highly transparent nature of the sensitized nanocrystalline oxide film, tandem structures employing a DSC and CIGS top and bottom cell reached a conversion efficiency of >15% [14].
4
M. Gr¨atzel
Obtaining long-term stability for DSCs at temperatures of 80–85◦ C had remained a major challenge for many years and has only been achieved in 2003 [15]. Solvent-free electrolytes such as ionic liquids or solid polymers have been introduced to provide systems that are suitable for practical applications. Stabilization of the interface by using self-assembly of hydrophobic sensitizers alone or in conjunction with amphiphilic co-adsorbents has been particularly rewarding. Stable operating performance under both prolonged thermal stress (at 85◦ C) and AM 1.5 light soaking conditions (at 60◦ C) has now been demonstrated [16–18]. These recent devices retained 98% of their initial power conversion efficiency after 1,000 h of high-temperature aging. Long-term accelerated testing shows that DSCs can function in a stable manner for over 20 years, if sealing and the interfacial engineering issues are properly addressed. The present review is on the state of the art of the academic and industrial development of nanostructured solar cells, with emphasis being placed on the work performed in the author’s laboratory.
2 Band Diagram and Operational Principle of Nanocrystalline Solar Cells Figure 2 shows a band diagram of the dye-sensitized nanocrystalline solar cell (DSC) and explains its operational principle. Sunlight is harvested by the sensitizer that is attached to the surface of a large band gap semiconductor, typically a film constituted by titania nanoparticles. Photo-excitation of the dye results in the Conducting glass TiO2
Injection
Dye
Electrolyte
Cathode
S*
−0.5
hν
0 E vs NHE (V) 0.5
Red
Maximum Voltage Mediator Ox Diffusion
1.0
S /S+ e-
e-
Fig. 2 Energy band diagram of the DSC. Light absorption by the dye (S) produces an excited state (S∗ ) that injects an electron into the conduction band of a wide band gap semiconducting oxide, such as TiO2 . The electrons diffuse across the oxide to the transparent current collector made of conducting glass. From there they pass through the external circuit performing electrical work and re-enter the cell through the back contact (cathode) by reducing a redox mediator (ox). The reduced form of the mediator (red) regenerates the sensitizer closing the cyclic conversion of light to electricity. See Color Plates
Recent Applications of Nanoscale Materials: Solar Cells
5
injection of electrons into the conduction band of the oxide. The dye is regenerated by electron donation from an organic hole conductor or an electrolyte that is infiltrated into the porous films. The latter contains most frequently the iodide/triiodide couple as a redox shuttle although other mediators such as cobalt(II/III) complexes [19, 20] or the TEMPO/TEMPO + redox couple [21] have also been developed + recently as an alternative to the I− /I− 3 system. Reduction of S by iodide regenerates the original form of the dye under production of triiodide ions. This prevents any significant buildup of S+ , which could recapture the conduction band electron at the surface. The iodide is regenerated in turn by the reduction of the triiodide ions at the counter electrode, where the electrons are supplied by migration through the external load completing the cycle. Thus, the device is regenerative producing electricity from light without any permanent chemical transformation. The voltage produced under illumination corresponds to the difference between the quasi-Fermi level of the electron in the solid and the redox potential of the electrolyte or the work function of the hole conductor.
3 The Importance of the Nanostructure The nanocrystalline morphology of the semiconductor film is essential for the efficient operation of all mesoscopic photovoltaic devices. A whole range of nanostructures has been tested so far ranging from simple assemblies of nanoparticles to nanorods [19], tetrapods [20] and nanotubes [21, 22]. The use of mesocopic interpenetrating network junctions has also overcome the fundamental problem posed by the notoriously short diffusion length of excitons or charge carriers that are encountered in organic and hybrid photovoltaic cells. For example in the well-known fullerene/polyhexylthiophene (P3HT) [23] or CdTe/P3HT [24] cells the excitons produced by light excitation of the polymer diffuse only over a distance of a few nanometers during their lifetime while the light absorption length in these films is several hundred nanometers. In a flat junction geometry the excitons recombine before they reach the junction where they dissociate into electrons and holes that produce the photocurrent. On the other hand, in a mesoscopic junction, the diffusion path to reach the interface is shortened to a few nanometers allowing generation of charge carriers from the excitons before they recombine. The use of interpenetrating network junctions is essential for the DSC. On a flat surface a monolayer of dye absorbs at most a few percent of light because it occupies an area that is several hundred times larger than its optical cross section. Using multi-layers of sensitizer does not offer a viable solution to this problem. Only the molecules that are in direct contact with the oxide surface would be photoactive – the remainder filtering merely the light. Apart from poor light harvesting a compact semiconductor film would need to be n-doped to conduct electrons. In this case energy transfer quenching of the excited sensitizer by the electrons in the semiconductor would inevitably reduce the photovoltaic conversion efficiency. For this reason the conversion yields obtained from the sensitization of flat electrodes
6
M. Gr¨atzel
100 nm
Fig. 3 Transmission electron microscope picture of a mesoscopic TiO2 (anatase) film. Note the bipyramidal shape of the particles having (101) oriented facets exposed. The average particle size is 20 nm
have been notoriously low. The use of nanocrystalline films to support the dye and collect the photo-injected electrons has permitted to overcome these problems resulting in a dramatic improvement of the performance of sensitized hetero-junction devices. Figure 3 shows a scanning electron microscopy picture of a mesoscopic TiO2 (anatase) layer. The particles have an average size of 20 nm and the facets exposed have mainly (101) orientation, corresponding to the anatase crystal planes with the lowest surface energy (ca. 0.5 J/m2 ). Employing such oxide nanocrystals covered by a monolayer of sensitizer as light harvesting units allows overcoming the notorious inefficiency problems, which have haunted all solar energy conversion devices based on the sensitization of wide band gap semiconductors.
3.1 Light Harvesting by a Sensitizer Monolayer Adsorbed on a Mesoscopic Semiconductor Film Consider a 10-μm thick mesoscopic oxide film composed of 20-nm-sized particles whose real surface area is over 1,000 times greater than the projected one. Because of the small size of the particles such films show high transparency and negligible
Recent Applications of Nanoscale Materials: Solar Cells
7
light scattering. Lambert Beer’s law can be applied to describe the light absorption by the adsorbed dye monolayer yielding for the reciprocal absorption length.
α = σ c.
(1)
Here, σ and c are the optical absorption cross section of the sensitizer and its concentration in the mesoporous film, respectively. The value of σ can be derived from the decadic extinction coefficient ε of the sensitizer using the relation:
α = 1, 000ε (cm2 /mol).
(2)
For example, the optical cross section of the N3 dye cis–RuL2 (SCN)2 (L = 2,2bipyridyl-4,4 dicarboxylate) is 1.4 × 107 cm2 /mole at 530 nm, where it has an absorption maximum, and its concentration in the nanocrystalline film at full monolayer coverage is typically 2 × 10−4 mol/cm3 . Hence α = 2.8 × 103 cm−1 and the absorption length 1/α is 3.6 μm for 530-nm light. The light harvesting efficiency LHE is derived from the reciprocal absorption length via: LHE(λ ) = 1 − 10−d ,
(3)
where d is the thickness of the nanocrystalline film. Using d = 10 μm and α = 2.8 × 103 cm−1 one obtains LHE = 99.8%. On a flat surface the N3 dye would have only absorbed 0.3% of the incident 530-nm light. The dramatic difference of the light harvesting efficiency is illustrated by the deep coloration of the nanocrystalline TiO2 layers shown in Fig. 4, despite of the fact that they are covered only by a monolayer of sensitizer. On a flat surface the N3 dye would have remained invisible to the eye. A film exhibiting ordered mesoporous structure, such as shown in Fig. 5 has an even higher internal surface area than one that is composed of randomly associated nanoparticles [24]. Because more sensitizer is adsorbed for the same film
Fig. 4 Uptake of N3 dye by a nanocrystalline TiO2 film, which is immersed in the dye solution. The resulting deeply red-colored film is the photoactive part of the DSC. See Color Plates
8
M. Gr¨atzel
Fig. 5 Top scanning electron microscope view of an ordered mesoporous TiO2 (anatase) film produced by a block-copolymer templating method [25]
Fig. 6 Scanning electron microscope view of a film constituted of titania nanotubes. The length of the tubes is about 5 μm
thickness its concentration in the mesoscopic TiO2 layer is increased, reducing the absorption length and enhancing the absorption of solar light over that of a dyecovered layer of randomly associated colloidal TiO2 particles of the same thickness. The problem with mesoporous films of the type shown in Fig. 5 is that ordered structures can only be realized so far up to a thickness of 1 μm, which is not enough to produce cells with conversion efficiencies over 5%. One-dimensional nanostructures such as the titania nanotubes shown in Fig. 6 and ZnO nanorods have been the focus of much recent interest [19,21,22,26]. These studies are motivated by the expectation that the transport of charge carriers along the tubes is more facile than within a random network of nanoparticles where the
Recent Applications of Nanoscale Materials: Solar Cells
9
electrons have to cross many particle boundaries. Hence, one-dimensional nanostructures should produce a lower diffusion resistance than the nanoparticle films facilitating the collection of photo-generated charge carriers.
3.2 Enhanced Red and Near IR Response by Light Containment The light harvesting by the surface adsorbed sensitizer can be further improved by exploiting light localization and optical enhancement effects. This increases the absorption of solar light in particular in the red and near IR region of the spectrum where currently used ruthenium complexes show only weak light absorption. For example, incorporating 200–400-nm-sized anatase particles enhances significantly the absorption of red or near infrared photons by the film. A scanning electron micrograph of such particles is shown in Fig. 7. These light management strategies employ scattering and photonic band gap effects [27–29] to localize light in the mesoporous structure augmenting the optical pathway significantly beyond the film thickness and enhancing the harvesting of photons in a spectral region where the optical cross section of the sensitizer is small. The benefits from using such a photon capture strategies are clearly visible below, where the light scattering layer is shown to enhance the photocurrent response of the DSC in the near IR and visible region of the solar spectrum. The gain in short circuit photocurrent through these optical containment effects can be as high as 30%.
Fig. 7 Scanning electron micrograph showing anatase crystals of ca. 400 nm size, employed as light scattering centres to enhance the red response of the DSC (courtesy of Dr. Tsuguo Koyanagi, Catalysts & Chemicals Ind. Co. Ltd., Japan). See Color Plates
10
M. Gr¨atzel
3.3 Light-Induced Charge Separation and Conversion of Photons to Electric Current The incident photon to current conversion efficiency (IPCE) sometimes referred to also as external quantum efficiency (EQE) corresponds to the number of electrons measured as photocurrent in the external circuit divided by the monochromatic photon flux that strikes the cell. The following product expresses this key parameter: IPCE(λ ) = LHE(λ )φinj ηcoll .
(4)
Here, LHE(λ ) is the light harvesting efficiency for photons of wavelength λ , φinj is the quantum yield for electron injection from the excited sensitizer in the conduction band of the semiconductor oxide and ηcoll is the electron collection efficiency. Having analyzed above the light harvesting efficiency of dye-loaded mesoscopic films we discuss now the other two parameters. The quantum yield of charge injection (φinj ) denotes the fraction of the photons absorbed by the dye that are converted into conduction band electrons. Charge injection from the electronically excited sensitizer into the conduction band of the semiconductor is in competition with other radiative or radiationless deactivation channels. Taking the sum of the rate constants of these nonproductive channels together as kdeact gives: (5) (φinj ) = kinj /(kdeact + kinj ). Typical kdeact values lie in the range from 103 to 1010 s−1 . Hence, injection rates in the picosecond range may have to be attained in order to obtain φinj values close to 1. The currently used sensitizers satisfy this requirement. These dyes incorporate functional groups e.g. carboxylate, hydroxamate or phosphonate moieties [30] that attach the sensitizer to the oxide surface. Figure 8 shows the side and top view of the RuL2 (NCS)2 (N3) sensitizer anchored to the (101) surface plane of TiO2 through coordinative binding of two carboxyl groups to the titanium ions. The green and red spheres present titanium and oxygen, respectively. Note that the left carboxylate group straddles two Ti(IV) surface ions from adjacent titanium rows corresponding to a bidentate bridging configuration while the right one forms a monodentate ester bond with one Ti(IV) ion. The structure shown represents the lowest energy configuration derived from molecular dynamics calculations [30] yielding for the area occupied by one adsorbed N3 molecule a value of 1.64 nm2 . By undergoing strong coordinative bonding with the titanium surface ions, these groups enhance electronic coupling of the sensitizer LUMO with the Ti(3d) orbitals forming the conduction band of the semiconductor. The lowest energy electronic transition for ruthenium polypyridyl complexes, such as the N3 dye is of MLCT (metal to ligand charge transfer) character, albeit with significant delocalization of the highest occupied molecular orbital (HOMO) over the SCN groups [27]. Upon optical excitation an electron is shifted from the Ru (SCN)2 moiety of the complex to the lowest unoccupied molecular orbital (LUMO) of the carboxylated bipyridine ligands moving in close vicinity to the titania surface. In a second step, the electron is injected from the LUMO into the conduction band of the nanocrystalline
Recent Applications of Nanoscale Materials: Solar Cells
11
Top view
Side view
Fig. 8 Side and top view of the RuL2 (NCS)2 (N3) sensitizer anchored to the (101) TiO2 anatase surface through coordinative binding of two carboxyl groups to surface titanium ions. The green and red spheres present titanium and oxygen, respectively. Note that the left carboxylate group straddles two Ti(IV) surface ions from adjacent surface titanium rows while the right one forms an ester bond. The structure shown represents the lowest energy configuration derived from molecular dynamics calculations and the area occupied by one adsorbed N3 molecule being 1.64 nm2 . See Color Plates
1e−
Fig. 9 Calculated shift in electron density during optical excitation and charge injection from the N3 sensitizer into the conduction band of a TiO2 (anatase) cluster [31] consisting of 38 titanium ions. The surface of the cluster corresponds to the (101) plane. See Color Plates
titania particles. Figure 9 shows the results from time-dependant DFT calculations [32] indicating the vectorial charge displacement from the HOMO of the sensitizer to the T(3d) orbitals of the oxide during the optical excitation and electron injection process while Fig. 10 presents a schematic of the energy levels involved in the sensitization. Shown in Fig. 11 is the transient absorption signal following femtosecond laser excitation of the N-719 dye adsorbed on the surface of nanocrystalline titania [33]. The formation of the oxidized sensitizer and conduction band electrons due
12
M. Gr¨atzel
Fig. 10 Interfacial electron transfer involving a ruthenium complex bound to the surface of TiO2 via a carboxylated bipyridyl ligand. Orbital diagram for the forward electron injection (rate constant kf ) from the π∗ orbital of the bipyridyl ligand into the empty t2g orbitals forming the TiO2 conduction band and the backward electron transfer from the conduction band of the oxide into the Ru(III) d orbitals. See Color Plates
to heterogeneous charge transfer from the excited ruthenium complex into the conduction band of the oxide occurs on a femtosecond time scale. Figure 11 indicates that the reaction is completed within the femtosecond laser excitation pulse. Fitted data provide a cross-correlation time of 57 fs that is consistent with the instrument response measured by Kerr gating in a thin glass window. Hence, this temporal resolution does not allow determination of the rate of the injection process accurately but its time constant can be estimated as being definitely shorter than 20 fs corresponding to a rate constant kinj > 5 × 1013 s−1 . Such high rate can be rationalized in terms of electronic coupling of the π∗ sensitizer LUMO with the t2g wavefunction of the Ti(3d) conduction manifold and a large density of acceptor states in the semiconductor. Since nuclear motion in the molecule and its environment takes place within a time frame of at least 20 fs, the observed charge injection dynamics is certainly beyond the scope of vibration-mediated electron transfer models [34–39]. The process rate is therefore likely to be limited only by the electron dephasing in the solid. Interestingly, much slower injection kinetics extending into
Recent Applications of Nanoscale Materials: Solar Cells
13
Fig. 11 Transient absorption signal for N719 adsorbed on nanocrystalline titania (open circle) (pump wavelength 535 nm, probe 860 nm). Fitted instrument response is 57 fs (straight line). Simulated exponential rises with time constants of 20 fs (dashed line) and 50 fs (dotted line) and convoluted with the same instrument response are shown
the picosecond time domain were observed when the sensitizer was present in an aggregated form at the surface of the titania films [40]. As the next step of the conversion of light into electrical current, a complete charge separation must be achieved. On thermodynamic grounds, the preferred process for the electron injected into the conduction band of the titanium dioxide films is the back reaction with the oxidized sensitizer. Naturally this reaction is undesirable, since instead of electrical current it merely generates heat. For the characterization of the recombination rate, an important kinetic parameter is the rate constant kb . It is of great interest to develop sensitizer systems for which the value of kinj is high and that of kb low. While for the N3-type sensitizer the forward injection is a very rapid process occurring in the femtosecond time domain, the back reaction of the electrons with the oxidized ruthenium complex occurs on a much longer timescale of micro- to milliseconds. One of the reasons for this striking behaviour is that the electronic coupling element for the back reaction is one to two orders of magnitude smaller for the back electron transfer. As the recapture of the electrons by parent sensitizer involves a d-orbital localized on the ruthenium metal the electronic overlap with the TiO2 conduction band is small and is further reduced by the spatial contraction of the wavefunction upon oxidation of Ru(II) to Ru(III). A second important contribution to the kinetic retardation of charge recombination arises from the fact that this process is characterized by a large driving force and small reorganization energy – the respective values for N-719 being 1.5 and 0.3 eV, respectively. This places the electron recapture clearly in the inverted Marcus region reducing its rate by several orders of magnitude [41, 42]. For the same reason the
14
M. Gr¨atzel
interfacial redox process is almost independent of temperature and is surprisingly insensitive to the ambience that is in contact with the film [43]. Charge recombination is furthermore inhibited by the existence of an electric dipole field at the surface of the titanium dioxide film. While the depletion layer field within the oxide is negligible due to the small size of the particles and their low doping level, a dipole layer is established at the surface by proton transfer from the carboxylic acid groups of the ruthenium complex to the oxide surface. In aprotic media, Li+ or Mg2+ are potential determining ions for TiO2 [44] as they charge the oxide positively. The local potential gradient from the negatively charged sensitizer to the positively charged oxide drives the injection in the desired direction and inhibits the electrons from re-exiting the solid. Finally, the back reaction dynamics are strongly influenced by the trapping of the conduction band in the mesoscopic film. If the diffusion of trapped electrons to the particle surface is rate determining, the time law for the back reaction is a stretched exponential [45]. If, by contrast the interfacial back electron transfer is so slow that it becomes rate determining then the back reaction follows first order kinetics.
3.4 Charge Carrier Collection The question of charge carrier percolation over the mesoscopic particle network is presently attracting a great deal of attention. This important process leads to nearly quantitative collection of electrons injected by the sensitizer. The large band gap semiconductor oxide films used in dye sensitized solar cells are insulating in the dark, however, a single electron injected in a 20-nm-sized particle produces an electron concentration of 2.4 × 1017 cm−3 . This corresponds to a specific conductivity of 1.6 ×10−4 S/cm if a value of 10−4 cm2 /s is used for the electron diffusion coefficient [46]. In reality the situation is more complex as the transport of charge carriers in these films involves trapping unless the Fermi level of the electron is so close to the conduction band that all the traps are filled and the electrons are moving freely. Therefore, the depth of the traps that participate in the electron motion affects the value of the diffusion coefficient. This explains the observation [47, 48] that the diffusion coefficient increases with light intensity. Recent Monte Carlo modelling gives an excellent description of the intricacies of the electron transport in such mesoscopic semiconductor films [49]. Of great importance for the operation of the DSC is the fact that charges injected in the nanoparticles can be screened on the mesoscopic scale by the surrounding electrolyte, facilitating greatly electron percolation [50]. The electron charge is screened by the cations in the electrolyte, which eliminates the internal field, so no drift term appears in the transport equation. Figure 12 illustrates this local screening effect. The electron motion in the conduction band of the mesoscopic oxide film is coupled with interfacial electron-transfer reaction and with ion diffusion in the electrolyte. Bisquert [51] has introduced a transmission line description to model these processes. The mesoscopic film is thought to be composed of a string of oxide nanoparticles (Fig. 12). Apart from recapture by the oxidized dye, the electrons can
Recent Applications of Nanoscale Materials: Solar Cells
Dye
RS
Dye Dye
Dye Dye
Dye
rtrans
rtrans
rct
rct
Dye
Dye Dye
Dye Dye
Dye Dye
rtrans
Dye Dye Dye
rtrans
Dye Dye
Dye
cch
RFTO/EL
cch
rct
Dye Dye Dye
CFTO/EL Dye
15
Dye
cch
Dye
RCE
Zd
Electrolyte Dye Dye
Dye Dye Dye
Dye Dye
Dye Dye
Dye
Dye
CCE
Dye Dye Dye
Dye
Dye Dye
Dye
Dye Dye
Dye
Dye
Dye
Dye Dye Dye Dye
Dye Dye
Dye Dye
Dye
Dye Dye Dye
Fig. 12 Equivalent electric circuit diagram of a solar cell based on a nanocrystaline semiconductor film in contact with an electrolyte. Two transmission lines are used to model the motion of the conduction band electron motion through a network of mesoscopic semiconductor particles and the charge compensating flow of redox electrolyte. The electrical equivalent circuit treats each particle as a resistive element. Interfacial electron transfer from the conduction band of the nanoparticle to the triodide is modelled by a charge transfer resistance rct connected in parallel with their chemical capacitance cch . The latter is defined as the electric charge (measured in Coulomb) that is required to move the Fermi level of the of the semiconductor nanoparticles by 1 eV. Zd is the Warburg diffusion resistance describing the motion of triiodide ions through the porous network to the counter electrode while RCE and CCE are the charge transfer resistance for the reduction of triodiodide and the double-layer capacitance of the counter electrode, respectively The red dots present cations from the electrolyte. See Color Plates
be lost to the electrolyte by the reaction with the oxidized from of the redox mediator, e.g. triiodide ions: − − (6) I− 3 + 2e cb(TiO2 ) → 3I . The equivalent electrical circuit shown in the lower part of the figure treats each particle as a resistive element coupled to the electrolyte through the interface. The latter is presented by the chemical capacitance (cch ) connected in parallel with the resistance (rct ) for interfacial electron transfer. The red dots denote electrolyte cations. It is clear from Fig. 12 that the movement of electrons in the conduction band of the mesoscopic films must be accompanied by the diffusion of charge-compensating cations in the electrolyte layer close to the nanoparticle surface. The cations screen the Coulomb potential of the electrons avoiding the formation of uncompensated local space charge, which would impair the electron motion through the film. This justifies using an ambipolar or effective diffusion coefficient, which contains both contributions from the electrons and charge-compensating cations [48, 52] to
16
M. Gr¨atzel
e− + * 3 S /S
−
1
Oxidation Potential
2
−
e
5 + TiO2
4 S+/S
Red/Ox Couple
Fig. 13 Photo-induced processes occurring during photovoltaic energy conversion at the surface of the nanocrystalline titania films. 1: sensitizer (S) excitation by light, 2: radiative and nonradiative deactivation of the sensitizer, 3: electron injection in the conduction band followed by electron trapping and diffusion to the particle surface, 4: recapture of the conduction band electron by the oxidized sensitizer (S+ ), 5: recombination of the conduction band electrons with the oxidized form of the redox couple regenerating the sensitizer and transporting the positive charge to the counterelectrode. Grey spheres: titania nanoparticles, red dots: sensitizer, green and blue dots: oxidized and reduced form of the redox couple. See Color Plates
describe charge transport in such mesoscopic interpenetrating network solar cells although at the high electrolyte concentrations employed the electron diffusion is the dominating factor. Figure 13 summarizes the injection and recombination processes. Mastering the interface to impair the unwanted back reactions remains a key target of current research [53]. The efficient interception of recombination by the electron donor, e.g. iodide: (7) 2S + 3I− → 2S + I− 3 is crucial for obtaining good collection yields and high cycle life of the sensitizer. In the case of N3 or its amphiphilic analogue Z-907 time-resolved laser experiments have shown the interception to take place with a rate constant of about 105 –107 s−1 at the iodide concentrations that are typically applied in the solar cell [54]. This is more than a hundred times faster than the recombination rate and >108 times faster than the intrinsic lifetime of the oxidized sensitizer in the electrolyte in absence of iodide.
Recent Applications of Nanoscale Materials: Solar Cells
17
To reach IPCE values close to 100%, provisions must be made to collect all photo-generated charge carriers. A key parameter is the electron diffusion length: √ Ln = De τr , (8) where De and tr are the diffusion coefficient and lifetime of the electron, respectively. Collection of charge carriers is quantitative if the electron diffusion length exceeds the film thickness (d): (9) Ln > d The film in turn needs to be significantly thicker than the light absorption length (1/α ) in order to ascertain nearly quantitative harvesting of the light in the spectral absorption range of the quantum dot or the molecular sensitizer: d > 1/α .
(10)
The thickness of the nanocrystalline layer required to satisfy the last conditions is typically of the order of a few microns depending on the optical cross section of the sensitizer and its concentration in the film as discussed earlier. A simple consideration shows that the electron collection efficiency is related to the electron transport (tτ ) and recombination time (tr ) or the respective electron transfer and recombination resistances (Rt and Rct ) by the equation [55]: 1 τt 1 1 Rt ηcc = + = 1− . (11) = 1− τt τt τr τ t + τr Rct + Rt The transport time of conduction band electron across a 10-μm thick nanocrystalline titania film is typically a few milliseconds while for good cells the recombination time is in the range of seconds. This explains why practically all the injected electrons reach the current collector before they recombine. These time constants or resistances can be measured by impedance spectroscopy, which provides a powerful tool for analyzing the circuit elements of nanocrystalline solar cells [56, 57].
3.5 Quantum Dot Sensitizers Semiconductor quantum dots (QDs) can replace dyes as light harvesting units in the DSC [58, 59]. Light absorption produces excitons or electron–hole pairs in the QD. The electron is subsequently injected in the semiconducting oxide support while the hole is transferred to a hole conductor or an electrolyte present in the pores of the nanocrystalline oxide film. Efficient and rapid hole injection from PbS quantum dots into triarylamine hole conductors has already been demonstrated and IPCE values exceeding 50% have been reached without attempting to optimize the collector structure and retard interfacial electron hole recombination [59]. QDs have much higher optical cross sections than molecular sensitizers, depending on their size. However, they also occupy a larger area on the surface of the mesoporous electrode
18
M. Gr¨atzel
decreasing the QD concentration in the film. As a result, the value of the absorption length is similar to that observed for the dye-loaded films. A recent exciting discovery shows that multiple excitons can be produced from the absorption of a single photon by a quantum dot via impact ionization (IMI) if the photon energy is three times higher than its band gap [60, 61]. The challenge is now to find ways to collect the excitons before they recombine. As recombination occurs on a femtosecond time scale, the use of mesoporous oxide collector electrodes to remove the electrons presents a promising strategy opening up research avenues that ultimately may lead to photovoltaic converters reaching efficiencies beyond the Shockley Queisar limit of 31%.
4 Photovoltaic Performance of the DSC Having dealt with the fundamental features of operation of a DSC we present now recent performance data obtained with this new type of thin film photovoltaic cell. A cross sectional view of the cell structure used in these experiments is shown in Fig. 14. Both the front and back contact are made of sodium lime float glass covered by a transparent conducting oxide. The latter material is fluorine-doped tin dioxide (FTO) having a sheet resistance of 10–15 Ω/square and has an optical transmission of 80–90% in the visible including reflection losses. The back contact is coated with a small amount of Pt to catalyze the interfacial electron transfer from the SnO2 electrode to triiodide the typical loading being 50 mg/m2 . The nanocrystalline TiO2 film is deposited by screen printing onto the FTO glass serving as front electrode followed by a brief sintering in air at 450◦ C to remove organic impurities and enhance the interconnection between the nanoparticles. Adsorption of the sensitizer monolayer occurs from solution by self-assembly. The cell is sealed using a Bynel (Dupont) hot melt. Redox electrolyte is introduced by injection through a hole on the back contact.
Fig. 14 Cross-sectional view of the embodiment of DSC used in the laboratory for photovoltaic performance measurements. See Color Plates
Recent Applications of Nanoscale Materials: Solar Cells
19
4.1 Photocurrent Action Spectra Mesoscopic TiO2 films are currently prepared mainly by hydrothermal methods, which have been standardized to yield films composed of 15–20 nm-sized anatase. The mesocopic morphology has a dramatic effect on the performance of a dye-sensitized solar cell. Figure 15 compares the photocurrent action spectrum obtained from a single crystal of anatase to that of a nanocrystalline film, both being sensitized by the standard N-719 ruthenium dye i.e. cis-RuL2 (SCN)2 (L = 2,2bipyridyl-4,4 dicarboxylate). The incident photon-to-current conversion efficiency (IPCE) or external quantum efficiency is plotted as a function of wavelength. The IPCE value obtained with the single crystal electrode is only 0.13% near 530 nm, where the N-719 sensitizer has an absorption maximum, while it reaches 88% with the nanocrystalline electrode. As a consequence, in sunlight the photocurrent augments more than 1,000 times when passing from a single crystal to a nanocrystalline electrode. This striking improvement defies expectation as such large-area junctions
Fig. 15 Conversion of light to electric current by dye-sensitized solar cells. The incident photon to current conversion efficiency is plotted as a function of the excitation wavelength. Left: single crystal anatase cut in the (001) plane. Right: nanocrystalline anatase film. Pictures of the two electrodes used as current collectors are also presented. The electrolyte consisted of a solution of 0.3 M LiI and 0.03 M I2 in acetonitrile
20
M. Gr¨atzel
should fare poorly in photovoltaic energy conversion the presence of defects at the disordered surface enhancing recombination of photo-generated charge carriers. Taking into account the optical losses in the FTO glass that serve as a front contact, the conversion of incident photons is practically quantitative in the 500– 600 nm range were the sensitizer has an absorption maximum. It is apparent from (5) that the light harvesting, electron injection- and charge carrier collection efficiency must be close to unity to achieve this result. Impedance studies have shown the diffusion length of the conduction band electrons in the DSC to be typically in the 20–100-μm range. This exceeds the thickness of the nanocrystalline TiO2 film explaining why all photo-induced charge carriers can be collected.
4.2 Overall Conversion Efficiency Under Global AM 1.5 Standard Reporting Condition The overall conversion efficiency of the dye-sensitized cell is determined by the photocurrent density measured at short circuit (JSC ), the open-circuit photo-voltage (Voc ), the fill factor of the cell (FF) and the intensity of the incident light (Is ).
ηglobal = Jsc ×Voc × f f /Is .
(12)
Under full sunlight (air mass 1.5 global, intensity Is = 1, 000 W/cm2 ), short circuit photo-currents ranging from 16 to 22 mA/cm2 are reached with state-of-the art ruthenium sensitizers, while Voc is 0.7–0.86 V and the fill factor values 0.65–0.8. A certified overall power conversion efficiency of 10.4% was attained [62] in 2001. A new record efficiency over 11.2% was achieved recently [3], and Fig. 16 shows the current voltage curve obtained with this cell.
Fig. 16 Photocurrent density vs. voltage curve for a DSC employing the N-719 dye adsorbed on a double layer of nanocrystalline TiO2 and scattering particles. The iodide/triiodide-based redox electrolyte employed a mixture of acetonitrile and valeronitrile as a solvent. The conversion efficiency in AM 1.5 sunlight was 11.18%
Recent Applications of Nanoscale Materials: Solar Cells
21
4.3 Increasing the Open Circuit Photovoltage We have identified additives, such as guanidinium ions, which are able to suppress the dark current at the titania electrolyte junction. Although these effects remain yet to be fully understood it appears that these ions assist the self-assembly of dye molecules at the TiO2 surface, rendering it more impermeable and reducing in this fashion the dark current of the cell. In addition guanidinium butyric acid was found to suppress the number of surface states acting as a recombination centers [63]. The ruthenium dye N-719 i.e. cis-RuL2 (SCN)2 (L = 2,2-bipyridyl-4,4 dicarboxylate) is adsorbed at the TiO2 surface via two of the four carboxylate groups. The spatial configuration of the adsorbed dye at the (111) oriented surface of the TiO2 nanocrystals has been assessed by FTIR analysis and molecular dynamics calculation. The dye monolayer is disordered and the lateral repulsion of the negatively charged dye molecules is attenuated by spontaneous co-adsorption of cations. It is desirable to increase the order of the dye monolayer at the interface and render it denser. The goal here is to make the dye layer insulating in order to block the dark current across the interface. The resulting gain in open circuit voltage can be calculated from the diode equation: Voc = (nRT /F) ln[(isc /io ) − 1],
(13)
where n is the ideality factor, whose value is between 1 and 2; io is the reverse saturation current and R and F are the ideal gas and Faraday’s constant, respectively. Increasing the injection and lowering the recombination rates are critical for maximizing the open circuit voltage of a cell as shown by (11). Using 1.5 as a value for the ideality factor in DSC, the reduction of the dark current by a factor of 10 would result in a voltage increase of 90 mV, boosting the conversion efficiency of the cell by at least 15%. The fact that the dye itself blocks the dark current of the DSC has been confirmed recently [64].
5 Development of New Sensitizers and Redox Systems While the improvements in DSC performance obtained recently are remarkable, it would be very difficult to reach much higher efficiencies with the standard N-719 sensitizer unless the redox system is changed. Because of the mismatch of the redox levels of the N-719 and the iodide/triiodide couple the regeneration reaction of the sensitizer consumes too large a fraction of the absorbed photon energy as is apparent from the band diagram shown in Fig. 2. Work on alternative redox systems whose Nernst potential is better adapted to that of the N-719 dye is currently being done [65, 66] and should ultimately lead to DSCs exhibiting Voc values above 1 V. Alternatively, if the present iodide-based redox system is maintained, introducing panchromatic sensitizers or dye mixtures can boost the efficiency of cells further. To give 15% conversion efficiency, these should be designed to yield at least 24 mA/cm2 short circuit current under full sunlight and fill factor as well as open
22
M. Gr¨atzel COOH O HOOC
N N
N Ru S
C
N
N N C S
O
Scheme 1 K-19 sensitizer with an extended p-system in one of its ligands. See Color Plates
circuit voltage values similar to those that are presently obtained. To achieve such photocurrents the light harvesting in the 650–900-nm range needs to be significantly improved. Scheme 1 shows the structure of a heteroleptic ruthenium complex coded K-19, which due to the extension of the π-system in one of its ligands has an enhanced absorption coefficient. An analogue of this dye with long alkyl side chains on the bipyridyl group, named Z-907, showed excellent light conversion performance and cell stability [16]. These dyes of Z-series have proved themselves to be very useful to solid-state DSC, where their hydrophobic nature indeed became a helpful factor. Subsequently, they enhanced the performance of systems containing ionic electrolytes and hole conductors. The K-19 dye also exhibits excellent conversion yield and stability [17, 18].
6 Solid-State DSCs Solid-state DSCs employing the lithium-coordinating K-67 dye and the holeconductor spiro-OMeTAD [67] in conjunction with additives such as Li(CF3 SO2 )2N, and t-butyl pyridine have shown 54% energy conversion efficiency under AM 1.5 global illumination [10]. Here again the self-assembly of the dye molecules to a dense layer on the TiO2 surface plays an important role, with the COOH groups serving as anchors and the lithium coordination to the sensitizer affording local electrostatic screening assisting charge separation.
7 DSC Stability While long-term accelerated light soaking carried tests have confirmed the intrinsic stability of current DSC embodiments [67] stable operation under high-temperature stress 80–85◦ C has been achieved only recently by judicious molecular engineering of the sensitizer used in conjunction with a robust and non-volatile electrolyte.
Recent Applications of Nanoscale Materials: Solar Cells
23
7.1 Criteria for Long-Term Stability of the Dye Figure 17 shows the coupling of two redox cycles involved in the solar energy conversion process. In analogy to natural photosynthesis, light acts as an electron pump initiating charge flow from the sensitizer via the conduction band of the oxide semiconductor to the external circuit. The dye is regenerated by electron donation from iodide producing iodine or triiodide. The latter diffuses to the counter electrode where the electrons injected into the circuit by the sensitizer reduce it back to iodide, thus closing the two redox cycles involved in the energy conversion process. The turnover frequency of the sensitizer is 25 s−1 in full sunshine and during 20 years of outdoor service it must support 100 million turnovers. Scheme 2 illustrates the catalytic cycle that the sensitizer performs during cell operation. Critical for stability are any side reactions that may occur from the excited state S* or the oxidized state of the dye (S+ ), which would compete with electron injection from the excited dye into the conduction band of the mesoscopic oxide and with the regeneration of the sensitizer. These destructive channels are assumed to follow first or pseudo-first order kinetics and are assigned the rate constants k1 and k2 . By introducing the two branching ratios, P1 = kinj /(k1 + kinj ) and P2 = kreg /(k2 + kreg ) where kinj and kreg are the first order or pseudo-first order rate constants for the injection and regeneration processes, respectively. The fraction of the sensitizer molecules that survive one cycle can be calculated as the product P1 × P2 . Also, the upper limit for the sum of the two branching ratios can be calculated for a cell operation of 20 years and is shown to be 1 × 10−8 . The turnover frequency, averaged over seasons and day–night time, of the dye has been derived as 0.155 s−1 .
Light
I
Conduction Band
–
e–
e–
S
1
2 I2
S* e –
e–
e–
S+ Semiconducting Membrane
e– Electrical Work
Fig. 17 The two coupled redox cycles involved in the generation of electricity from light in a dye-sensitized solar cell. See Color Plates
24
M. Gr¨atzel
Scheme 2 The catalytic cycle of the sensitizer during cell operation
7.2 Kinetic Measurements As indicated earlier, for most of the common sensitizers the rate constant for electron injection from the excited state to the conduction band of the TiO2 particles is in the femtosecond range. Assuming kinj = 1 × 1013 s−1 , a destructive side reaction with k1 < 105 s−1 could be tolerated. Ruthenium sensitizers of the N3 type readily satisfy this condition. They can undergo photo-induced loss or exchange of the thiocyanate ligand, which however occurs at a much lower rate than the 105 s−1 limit. It is also debatable whether this pathway is destructive as the product formed still acts as a charge transfer sensitizer. In ethanolic solution prolonged photolysis of N3 dye leads to sulphur loss and formation of the cyanato-ruthenium complex probably via photoxidation by oxygen. However, this reaction is not observed when the dye is adsorbed on oxide surfaces. Precise kinetic information has also been gathered for the second destructive channel involving the oxidized state of the sensitizer, the key parameter being the ratio k2 /kreg of the rate constants for the degradation of the oxidized form of the sensitizer and its regeneration. The S+ state of the sensitizer can be readily produced by chemical or electrochemical oxidation and its lifetime determined independently by absorption spectroscopy. Data from a recent study of Z-907 shows that the formation of its oxidized form occurs over the first 8–10 min after the addition of an oxidant. The subsequent decay occurs with a lifetime of 75 min corresponding to k2 = 2.2 × 10−4 s−1 . The regeneration rate constant for this sensitizer in a typical iodide/triiodide redox electrolyte is at least 2 × 105 s−1 . Hence the branching ratio is about 10−9 that is well below the limit of 10−8 admitted to achieve the 100 million turnovers and a 20-year lifetime for the sensitizer.
7.3 Recent Experimental Results on DSC Stability Many long-term tests have been performed with the N3-type ruthenium complexes confirming the extraordinary stability of these charge transfer sensitizers. For example, a European consortium financed under the Joule program [41,42] has confirmed
Recent Applications of Nanoscale Materials: Solar Cells
25
cell photocurrent stability during 10,000 h of light soaking at 2.5 sun corresponding to ca. 56 million turnovers of the dye without any significant degradation. These results corroborate the projections from the kinetic considerations made earlier. A more difficult task has been to reach stability under prolonged stress at higher temperatures, i.e. 80–85◦ C. Recent stabilization of the interface by using self-assembly of sensitizers in conjunction with amphiphilic coadsorbents has been particularly rewarding by allowing the DSC to meet for the first time the specifications laid out for outdoor applications of silicon photovoltaic cells. For example, the new amphiphlic sensitizer K-19 shows increased extinction coefficients due to extension of the π conjugation of the hydrophobic bipyridyl and the presence of electrondonating alkoxy groups. Taking advantage of the enhanced optical absorption of this new sensitizer and using it in conjunction with decylphoshponic acid (DPA) as co-adsorbent and a novel electrolyte formulation, a ≥ 8% efficiency DSC has been realized showing strikingly stable performance under both prolonged thermal stress and light soaking [16]. Hermetically sealed cells were used for long-term thermal stress test of cells stored in the oven at 80◦ C. The VOC of such a device drops only by 25 mV during 1,000-h aging at 80◦ C while there was a ∼70-mV decline for a device stained with the K-19 sensitizer alone. The stabilizing effect of the DPA is attributed to the formation of a robust and compact molecular monolayer at the mesoscopicTiO2 surface, reducing the amount of adsorbed water and other interfering impurities. This stabilization of the VOC allowed the solar cell to sustain the high conversion efficiency during extended heat exposure [16]. Figure 18 shows results from a recent long-term illumination experiment carried out at Dyesol with two cells over a period of close to 14 months. After 10,000 h of continuous illumination 0.56 million coulombs of charge had passed per square centimeter of electrode surface corresponding to a turnover number of 60 million. During this time the measured JSC increased from initially 12 to 15 mA/cm2 while
Fig. 18 Temporal evolution of short circuit photocurrent and open circuit photo-voltage under long-term light soaking of a Z907-sensitized DSC using a non-volatile electrolyte (courtesy of Dyesol)
26
M. Gr¨atzel
the Voc decreased slightly from 0.72 to 0.65 V. The opposite change of Jsc and Voc reflects probably a small positive shift of flat-band potential of the mesoporous titania film under the thermal stress, which can result in a net enhancement of photoinduced charge separation efficiency in the DSC.
8 First Large-Scale Field Tests and Commercial Developments During recent years industrial interest in the dye-sensitized solar cell has surged and the development of commercial products is progressing rapidly. A number of industrial corporations, such as G24 Innovations (http://www.g24i.com), Aisin Seiki in Japan, and well as Solaronix in Switzerland are actively pursuing the development of both flexible- and glass-based modules. Particularly interesting are applications in building integrated photovoltaic elements such as electric power-producing glass tiles. The Australian company Dyesol (http://www.dyesol.com) has produced such tiles on a large scale for field testing and several buildings have been equipped with a wall of this type. Aisin Seiki in Japan in collaboration with Toyota Research laboratory has started DSC prototype production. The layout of these modules is shown in Fig. 19. Note the monolithic design is using carbon as interconnect and cathode material to keep the cost down.
Fig. 19 Production of DSC prototypes by Aisin Seiki in Japan. Note the monolithic design of the PV modules and the use of carbon as interconnect and counter electrode material. The red dye is related to N-719 while the black dye has the structure RuL (NCS)3 where L = 2, 2 , 2 -terpyridyl4,4, 4 tricarboxylic acid. See Color Plates
Recent Applications of Nanoscale Materials: Solar Cells
27
Field tests of such modules have already started several years go and the results of these tests revealed advantages of the DSC with regards to silicon panels under realistic outdoor conditions. Thus, for equal rating under standard test conditions (STC) the DSC modules produced 20–30% more energy than the polycrystalline silicon (pc-Si) modules [68]. The superior performance of the DSC can be ascribed to the following factors: • The DSC efficiency is practically independent of temperature in the range of 25–65◦ C while that of mono and pc-Si declines by ca. 20% over the same range. • Outdoor measurements indicate that the DSC exhibits lower sensitivity to light capture as a function of the incident angle of the radiation, although this needs to be further assessed. • The DSC shows higher conversion efficiency than pc-Si in diffuse light or cloudy conditions. While it is up to the commercial supplier to set the final price for such modules it is clear that the DSC shares the cost advantage of all thin film devices. In addition it uses only cheap and readily available materials [26]. Finally, in contrast to amorphous silicon and CIGS cells the DSC avoids high vacuum production steps that are very cost intensive. Given these additional advantages at comparable conversion efficiency, module costs well below 1 are realistic targets even for plants having well below GW capacity. The DSC has thus become a viable contender for large-scale future solar energy conversion systems on the bases of cost, efficiency, stability and availability as well as environmental compatibility. These DSC panels have been installed in the walls of the Toyota dream house shown in Fig. 20, offering a building-integrated source of solar power to the inhabitants.
The Toyota Dream House
DSC made by AISIN -SEIKI
Fig. 20 The Toyota “Dream House” featuring DSC panels made by Aisin Seiki. For details see web announcement http://www.toyota.co.jp/jp/news/04/Dec/nt04 1204.html. See Color Plates
28
M. Gr¨atzel
Fig. 21 First commercial flexible lightweight cell produced by G24 Innovation on a large scale for us as telephone chargers. See Color Plates
G24 innovation has been the first to realize large-scale, role-to-role production of lightweight flexible cells, which are sold presently on the market for mobile telephone charging. A photograph of such a cell is shown in Fig. 21.
9 Future Prospects Reaching much beyond 12% conversion efficiency for DSC, by relying mainly on panchromatic and IR absorbing dyes or surface modifications will require enhanced light collection in the 700–900-nm region. An alternative and promising approach will be the use of a tandem concept, where the top and bottom cells are judiciously chosen to absorb complimentary components of the available light including the IR region. Such a device was recently tried in our laboratory and obtained 15% conversion efficiency
10 Summary Using a principle derived from natural photosynthesis, mesoscopic injection solar cells and in particular the DSC have become a credible alternative to solid-state p–n junction devices. Conversion efficiencies over 11% and 15% have already been
Recent Applications of Nanoscale Materials: Solar Cells
29
obtained with single junction and tandem cells, respectively, on the laboratory scale, but there is ample room for further amelioration. Future research will focus on improving the Jsc by extending the light response of the sensitizers in the near IR spectral region. Substantial gains in the Voc are expected from introducing ordered oxide mesostructures and controlling the interfacial charge recombination by judicious engineering on the molecular level. Hybrid cells based on inorganic and organic hole conductors are an attractive option in particular for the flexible DSC embodiment. Nanostructured devices using purely inorganic components will be developed as well. The mesoscopic cells are well suited for a whole realm of applications ranging from the low power market to large-scale applications. Their excellent performance in diffuse light gives them a competitive edge over silicon in providing electric power for stand-alone electronic equipment both indoor and outdoor. Application of the DSC in building integrated PV has already started and will become a fertile field of future commercial development. Acknowledgements Financial support from the EU and Swiss sources (ENK6-CT2001-575 and SES6-CT-2003-502783), as well as the United States Airforce (USAF contract No. FA8655-0313068) is acknowledged.
References 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18.
B.O’ Regan, M. Gr¨atzel, Nature 1991, 335, 7377 M. Gr¨atzel, Nature 2001, 414, 338–344 M. Gr¨atzel, Chem. Lett. Chem. Lett. 2005, 34, 8–13 M.K. Nazeeruddin, A. Kay, I. Rodicio, R. Humphrey-Baker, E. M¨uller, P. Liska, N. Vlachopoulos, M. Gr¨atzel, J. Am. Chem. Soc. 1993, 115, 6382 M. Gr¨atzel, J. Photochem. Photobiol. A: Chem. 2004, 164, 3–14 M. Gr¨atzel, Inorg. Chem. 2005, 44, 6841 M.K. Nazeeruddin, F. De Angelis, S. Fantacci, A. Selloni, G. Viscardi, P. Liska, S. Ito, B. Takeru, M. Gr¨atzel, J. Am. Chem. Soc. 2005, 127, 16835 Q. Wang, S. Ito, M. Gr¨atzel, F. Fabregat-Santiago, I. Mora-Sero, J. Bisquert, T. Bessho, H. Imai, J. Phys. Chem. B 2006, 110, 25210 Y. Chiba, A. Islam, Y. Watanabe, R. Komiya, N. Koide, L. Han, Jpn. J. Appl. Phys. Part 2, 2006, 45, 24–28 H.J. Snaith, M. Gr¨atzel, Nano. Lett. 2007, 7, 3372–3376 U. Schmidt-Mende, R. Bach, T. Humphry-Baker, H. Horiuchi, S. Miura, S. Ito, M. Uchida, Adv. Mat. 2005, 17, 813–815 M. Nanu, J. Schoonman, A. Goossens, Adv. Mat. 2004 16, 453. M. Nanu, J. Schoonman, A. Goossens, Adv. Funct. Mat. 2005, 15, 95 P. Liska, R. Thampi, D. Br´emaud, D. Rudmann, H.M. Upadhyaya, A.N. Tiwari, M. Gr¨atzel. Appl. Phys. Lett. 2006, 88, 203103 P. Wang, S.M. Zakeeruddin, J.E. Moser, M.K. Nazeeruddin, T. Sekiguchi, M. Gr¨atzel Nat. Mat. 2003, 2, 402 P. Wang, C. Klein, R. Humphry-Baker, S.M. Zakeeruddin, M. Gr¨atzel, Appl. Phys. Lett. 2005, 86, 123508 D. Kuang, C. Klein, S. Ito, J.E. Moser, R. Humphry-Baker, N. Evans, F. Duriaux, C. Gr¨atzel, S. M. Zakeeruddin, M. Gr¨atzel, Adv. Mater. 2007, 19, 1133 D. Kuang, C. Klein, Z. Zhang, , S. Ito, J-E. Moser, S.M. Zakeeruddin, M. Gr¨atzel, Small 2007, 3, 2094–2102
30
M. Gr¨atzel
19. E. Galoppini, J. Rochford, H. Chen, G. Saraf, Y. Lu, A. Hagfeldt, G. Boschloo, J. Phys. Chem. B 2006, 110, 16159–16161 20. L. Fang, J.Y. Park, Y. Cui, P. Alivisatos, J. Shcrier, B. Lee, L.W Wang, M. Salmeron, J. Chem. Phys. 2007, 127, 184704/1–184704/6 21. K. Shankar, J. Bandara, M. Paulose, H. Wietasch, O.K. Varghese, G.K. Mor, T.J. LaTempa, M. Thelakkat, C.A. Grimes, Nano Lett. 2008, 8, 1654–1659 22. J.M. Macak, A. Ghicov, R. Hahn, H. Tsuchiya, P. Schmuki, J. Mat. Res. 2006, 21, 2824–2828 23. G. Dennler, N.S. Sariciftci, C.J. Brabec, Semiconducting Polym. (2nd Edition) 2007, 2 455–530 24. W.U. Huyn, J.J. Dittmer, A.P. Alivisatos, Science 2002, 295, 2425 25. M. Zoukalova, A. Zoukal. L. Kavan, M.K. Nazeeruddin, P. Liska, M. Gr¨atzel Nanolett. 2005, 5, 1789–1792 26. M. Law, L.E. Greene, J.C. Johnson, R. Saykally, P. Yang, Nat. Mat. 2005, 4, 455–459 27. S. Nishimura, N. Abrams, B. Lewis, L.I. Halaoui, Th.E. Mallouk, K.D. Benkstein, J. van de Lagemaat, J A.J. Frank, J. Am. Chem. Soc. 2003, 125, 6306 28. L.I. Halaoui, N.M. Abrams, T.E. Mallouk, J. Phys. Chem. 2005, 109, 6334 29. S. Hore, P. Nitz, C. Vetter, C. Prahl, M. Niggemann, R. Kern, Chem. Comm. 2005, 15, 2011 30. V. Shklover, M.K. Nazeeruddin, M. Gr¨atzel, Yu.E. Ovshinikov. Appl. Organometallic Chem. 2002, 16, 635–647 31. F. De Angelis, S. Fantacci, A. Seloni, Md.K. Nazeeruddin, M. Gr¨atzel, J. Am. Chem. Soc. 2007, 129, 14156 32. A. Hagfeldt, M. Gr¨atzel, Acc. Chem. Res. 2000, 33, 269–277 33. D. Kuang, S. Ito, B. Wenger, C. Klein, J.-E. Moser, R. Humphry-Baker, S.M. Zakeeruddin, M. Gr¨atzel, J. Am. Chem. Soc. 2006, 128, 4146–4154 34. Y. Tachibana, J.E. Moser, M. Gr¨atzel, D.R. Klug, J.R. Durrant, J. Phys. Chem. 1996, 100, 20056 35. J.E. Moser, M. Gr¨atzel, Chimia 1998, 52, 160 36. G. Benk¨o, J. Kallioinen, J.E.I. Korppi-Tommola, A.P. Yartsev, V. Sundstr¨om, J. Am. Chem. Soc. 2002, 124, 489 37. J. Kallioinen, G. Benk¨o, V. Sundstr¨om, J.E.I. Korppi-Tommola, A.P. Yartsev, J. Phys. Chem. B, 2002, 106, 4396 38. G. Benk¨o, J. Kallioinen, P. Myllyperki¨o, F. Trif. J.E.I. Korppi-Tommola, A.P. Yartsev, V. Sundstr¨om, J. Phys. Chem. B. 2004, 108, 2862 39. K. Schwarzburg, R. Ernstorfer, S. Felber, F. Willig, Coord. Chem. Rev. 2004, 248(13–14), 1259–1270 40. B. Wenger, M. Gr¨atzel, J.E. Moser, Am. Chem. Soc. 2005, 127, 12150–12151 41. J.M. Lanzafame, R.J.D. Miller, A.A. Muenter, B.A. Parkinson, J. Phys. Chem. 1992, 96, 2820 42. R. Huber, J.E. ’Moser, M. Gr¨atzel, J. Wachtveitl, Proc. SPIE 2003, 5223, 121 43. J.E. Moser, and M. Gr¨atzel, Chem. Phys. 1993, 176, 493 44. G. Redmond, and D. Fitzmaurice, J. Phys. Chem. 1993, 97, 11081 45. J. Nelson, R.E. Chandler, Coord. Chem Rev. 2004, 248, 1181–1194 46. H.G. Agrell, G. Boschloo, A. Hagfeldt, J. Phys. Chem. B 2004, 108, 12388 47. M.J. Cass, A.B. Walker, D. Martinez, L.M. Peter, J. Phys. Chem. B 2005, 109, 5100 48. A.J. Frank, N. Kopidakis, J. van de Lagemaat, Coord. Chem. Rev. 2004, 248, 1165 49. M.J. Cass, F.L. Qiu, A.B. Walker, A.C. Fisher, and L.M. Peter J. Phys. Chem. B 2003, 107 (1), 113–119 50. W. Kubo, T. Kitamura, K. Hanabusa, Y. Wada, S. Yanagida, Chem. Commun. 2002, 374-375 51. J. Bisquert, J. Phys. Chem. B 2002, 106, 325–333 52. S. Nakade, W. Kubo, Y. Saito, T. Kanzaki, T. Kitamura, Y. Wada, S.J. Yanagida, Phys. Chem. B 2003, 107, 4374–4381 53. P. Wang, S.M. Zakeeruddin, J.E. Moser, R. Humphry-Baker, P. Comte, V. Aranyos, A. Hagfeldt, M.K. Nazeeruddin, M. Gr¨atzel, Adv. Mat. 2004, 16, 1806 54. P. Wang, B. Wenger, R. Humphry-Baker, J.-E. Moser, J. Teuscher, W. Kantlehner, J. Mezger, E.V. Stoyanov, S.M. Zakeeruddin, M. Gr¨atzel, J. Am. Chem. Soc. 2005, 127, 18
Recent Applications of Nanoscale Materials: Solar Cells
31
55. Q. Wang, Z. Zhang, S. M. Zakeeruddin, M. Gr¨atzel J. Phys. Chem. C 2008, 112 (17), 7084–7092 56. F. Fabregat-Santiago, J. Bisquert, G. Garcia-Belmonte, G. Boschloo, A. Hagfeldt, Solar Energy Mat. Solar Cells 2005, 87, 117 57. Q. Wang, J.-E. Moser, M. Gr¨atzel, J. Phys. Chem. B 2005, 109, 14945–14953 58. R. Plass, S. Pelet, J. Kr¨uger, M. Gr¨atzel, U. Bach. J. Phys. Chem. B 2002, 106, 7578–7580 59. A.J. Nozik, Quantum dot solar cells, Next Generation Photovoltaics 2004, 196–222 60. R. Schaller, V.I. Klimov, Phys. Rev. Lett. 2004, 92, 186601 61. M.C. Beard, K.P. Knutsen, P. Yu, J.M. Luther, Q. Song, W.K. Metzger, R.J. Ellingson, A.J. Nozik, Nano. Lett. 2007, 7, 2506–2512 62. M.K. Nazeeruddin, P. Pechy, T. Renouard, S.M. Zakeeruddin, R. Humphry-Baker, P. Comte, P. Liska, L. Cevey, E. Costa, V. Shklover, L. Spiccia, G.B. Deacon, C.A. Bignozzi, M. Graetzel, J. Am. Chem. Soc. 2001, 123, 1613–1624 63. Z. Zhang, S.M. Zakeeruddin, B.C. O’Regan, R. Humphry-Baker, M. Gr¨atzel, J. Phys. Chem. B 2005, 109, 21818–21824 64. S. Ito, P. Liska, P. Comte, R. Charvet, P. Pechy, U. Bach, L. Schmidt-Mende, S.M. Zakeeruddin, A. Kay, M.K. Nazeeruddin, M. Gr¨atzel, Chem. Comm. (Cambridge, UK) 2005, 4351–4353 65. H. Nusbaumer, S.M. Zakeeruddin, J.-E. Moser, M. Gr¨atzel, Chem. Europ. J. 2003, 9, 3756–3763 66. M. Brugnati, S. Caramori, S. Cazzanti, L. Marchini, R. Argazzi, C.A. Bignozzi, Int. J. Photoenergy 2007, 2, 80756/1–80756/10 67. A. Hinsch, J.M. Kroon, R. Kern, I. Uhlendorf, J. Holzbock, A. Meyer, J. Ferber, Prog. Photovoltaics 2001, 9, 425–438 68. T. Toyoda, T. Motohiro, Seramikkusu 2004, 39, 465–468
Assembly and Properties of Nanoparticles Caue Ribeiro and Edson R. Leite
Abstract A short review is presented on the properties and main features of nanoscale materials, emphasizing the dependence of key properties on size for energy purposes. A general description is also given about nanoparticle synthesization methods (mainly oxides), focusing on advances in tailoring controlled shape nanostructures.
1 Introduction Most of today’s energy needs are still met by fossil fuels (finite reserves). However, fossil fuels may be abandoned far earlier than generally believed in favor of clean renewable energy sources, as soon as the latter become environmentally and economically more attractive alternatives. The main problem of new energy conversion and storage technologies remains the efficiency of devices. Designs based on nanoscale-range materials can provide new or improved technologies for devices involving electrochemical reactions and heterogeneous catalysis such as fuel and solar cells, batteries, etc. Nanoscale structures dramatically alter surface reaction rates and electrical transport throughout the material, considerably improving its ability to store, convert, and generate energy. Furthermore, the design of nanoscale materials for application in alternative energy devices is a predictable way to develop a wide range of new technologies for an environmentally friendlier future. The physical and chemical properties of nanoscale materials (usually defined in the 1–100 nm range) are of immense interest and increasing importance for future technological applications. Nanoparticles or nanocrystals (in this work, the terms nanoparticles and nanocrystals are synonymous) generally display properties E.R. Leite () LIEC – Universidade Federal de S˜ao Carlos, Departamento de Qu´ımica, Rod. Washington Luiz, km 235 – 13565-905, S˜ao Carlos, SP, Brazil e-mail:
[email protected] E.R. Leite (ed.), Nanostructured Materials for Electrochemical Energy Production and Storage, Nanostructure Science and Technology, DOI 10.1007/978-0-387-49323-7 2, c Springer Science+Business Media LLC 2009
33
34
C. Ribeiro and E.R. Leite
that differ from those of bulk material. The literature provides several examples of properties, such as magnetic and optical properties, melting point, specific heat, and surface reactivity, which can be affected by particle size [1–6]. A material’s properties are usually very substantially modified in the 1–10 nm sizes. These changes are known as quantum size effects, and their origin is directly related to the type of chemical bond in the crystal [7]. The correlation between properties and particle size has been known since the nineteenth century, when M. Faraday demonstrated that the color of colloidal Au particles can be modified, changing the Au particle size [8]. However, despite the subject’s long history, interest in nanoparticles has only grown considerably over the last decade. The driving force for this increase in research activities is the ability to control a material’s properties by controlling the size and shape of crystals and the arrangement of such particles. These developments can lead to new technologies, including energy conversion [9–14], catalysis and sensors [15, 16], ultrahigh density data storage media [17–19], nanoparticle light-emitting diodes [20,21], and special pigments [22]. From the standpoint of energy, nanostructured materials offer a way for alternative energy devices such as solar and fuel cells to become truly feasible and for the performance of batteries and super-capacitors for energy storage to be dramatically improved. The future of these new technologies is strictly dependent on the development of synthetic routes to process metal, metal oxides, and semiconductor nanoparticles, as well as processes that allow such nanoparticles to be manipulated and controlled. This introductory chapter discusses basically two topics, i.e., the properties of nanoparticles or, more precisely, how size modifies a material’s properties, and how to synthesize nanocrystals with a controlled morphology. Special attention is given to fundamental subjects such as quantum confinement, phase transformation and nucleation, and growth processes.
2 Nanoparticles Surfaces The surface of a material plays a key role in many of its characteristics, ranging from chemical reaction rates to optical properties [2]. Simply stated, this is due to the fact that an inner atom in the particle will interact with other atoms in its surroundings, whereas the surface atoms do not have neighbors in a given direction [23]. This interaction enables nanoparticles to contribute substantially to the material’s surface disorder and, hence, to its properties. Gilbert and coworkers [24] applied wide-angle X-ray scattering technique (WAXS) on 3.4 nm ZnS nanoparticles, attributing pair distribution functions (PDF) to the nanoparticles. Their results revealed structural disorder caused by nanoparticle strain and contraction of the bond lengths at the surface. These interesting results confirm that any observation of nanoparticles must take into account the surface effects, especially in very small particles. The dependence of the surface area on size is, therefore, the simplest way to observe the modulation of properties in nanoparticles. The correlation between the surface area and volume of a spherical particle can be determined by the formula
Assembly and Properties of Nanoparticles
35
4π R2p Area 3 = = , 3 Volume 4/3π Rp Rp
(1)
where Rp is the particle radius. To normalize the relation for a given mass (to obtain the surface area in area/weight), it is useful multiply the result by the material’s density, ρ . Since nanoparticles are not true spheres, we can derive a geometric expression to give the number of atoms in a near-spherical shape, as follows [25]: N=
R3p , ra3
(2)
where ra is the radius of an atom deduced from the atomic volume. Since the nanoparticle volume is proportional to N and (by analogy) the number of atoms in surface scales is quadratically proportional to Rp , a similar result is obtained for the ratio of surface atoms and inner atoms in a given particle. Thus, (1) can be interpreted as being related to the proportion of atoms on the particle’s surface. Therefore, the relation assumes a constant value (close to zero) only for large particles; however, in very small particles, the relation tends to infinity, i.e., the majority of the atoms forming a particle are at the surface. Practical conclusions can be observed in properties intrinsically related to the coordination of atoms in space. One of the first properties studied extensively as a function of particle size was the solid–liquid transition, i.e., the variation of melting point with size [26–32]. A decrease in the melting temperature has been observed with decreasing nanocrystal size in a wide range of materials. In CdS nanocrystals, Goldstein and coworkers [31] observed a temperature depression of over 50% for nanocrystals in the 15 nm range. Comparing the final results with the reported bulk melting temperature – about 1,690◦ C – the smaller nanoparticles melted at ≈ 600◦ C. This phenomenon must be interpreted in light of the fact that given their high surface energy, surface atoms tend to be unsaturated. This surface energy is always lower in the liquid phase than in the solid, and in the liquid phase, these atoms tend to move to minimize energy. In the rigid geometry of a solid, the surface atoms are constrained, and melting is a way to reduce the total surface energy. In higher surface areas, the contribution of surface energy will be higher, and melting temperature will be reduced. According to the liquid-drop model, the total cohesive energy (Eb ) of a nanoparticle with N atoms is equal to the volumetric or bulk energy av N minus the surface energy, the latter term arising from the presence of atoms on the surface. Hence, the cohesive energy per atom, i.e., Eb /N = av,Rp , is given by av,Rp = av −
4π ra2 γ = av − as N −1/3 , N 1/3
(3)
where av represents the bulk’s cohesive energy and γ is the material’s surface energy. This expression is the same as that of the binding energy per nucleon obtained from the liquid-drop model. Since the number of atoms in a near-spherical nanoparticle with radius Rp is known (2), we can write
36
C. Ribeiro and E.R. Leite
av,Rp = av −
12υ0 γ , Rp
(4)
where υ0 is the atomic volume. This expression gives a qualitative view of the size dependence of the amount of energy required to remove an atom from a cluster. Since empirical studies [26] have established a linear relation between the melting point (Tm ) and the cohesive energy av , we can write a relation of Tm /T0 and the nanoparticle radius, as follows [25]: 2βE,υ ,T0 Tm = 1− T0 Rp
(5)
where βE,υ ,T0 is a constant dependent upon surface energy, atomic volume, and the bulk melting temperature, T0 . Similar results have been obtained from classical thermodynamic treatments. The linear relationship between Tm and R−1 was compared with experimental data for Pb and In nanoparticles, and for several metals in molecular–dynamic simulations [25]. The results showed that this simple approach efficiently demonstrates the melting point’s dependence on size. Figure 1 gives an example of melting temperature depression in sodium clusters [32], where the approach seems to be valid. Other aspects of the high surface area in nanoparticles appear in catalytic studies. In fact, it is well known that, in heterogeneous catalysis, the rate of reaction is assumed to be proportional to the surface coverage [33]. Therefore, the greater
Fig. 1 Melting of sodium nanoparticles (from Martin et al. [32]). The metal has bulk melting temperature Tm,bulk = 371 K
Assembly and Properties of Nanoparticles
37
the material’s surface area the greater is its catalytic activity. Several reports discuss this enhancement of catalytic activity, mainly in metallic nanoparticles such as Pt, Rh, Pd, and Co [34–38]. However, it is not easy to separate the effects intrinsically dependent on size from those dependent on the shape of nanoparticles [39]. Irregular shapes will strongly interfere in the vicinity of the surface atoms, especially at the corners and edges. In fact, the sphere is the most stable geometry, and any other shape will have a higher surface area to a given volume. Also, the distribution of crystallographic planes differs in each shape. Narayanan and El-Sayed [38–40] compared the activation energy in the electron transfer reaction between hexacyanoferrate (III) ions and thiosulfate ions catalyzed by Pt nanoparticles, mainly tetrahedral, cubical, and spherical. Tetrahedral Pt nanoparticles are composed of (111) facets, with sharp edges and corners, while cubical nanoparticles comprise (100) facets whose edges and corners are less sharp than the tetrahedral ones, and spherical (or near-spherical) nanoparticles consist of numerous (111) and (100) facets with smooth corners and edges. The authors observed lower activation energy in the above described reaction in tetrahedral nanoparticles (14.0 ± 0.6 kJ mol−1 ) than in cubical (26.4 ± 1.3 kJ mol−1 ) and spherical (22.6 ± 1.2 kJ mol−1 ) nanoparticles. The lower activation energy of spherical particles was attributed to the lower particle size when compared with the cubical (4.9 against 7.1 nm). However, the comparison with tetrahedral particles (4.8 nm) is consistent and clearly shows the dependence on shape, which ultimately means the corners/edges and the crystallographic planes at the surface. Another interesting feature to be pointed out is the instability of these anisotropic shapes [41]. The dissolution and poisoning of atoms in heterogeneous catalysis has been found to occur primarily in the corners and edges because of the higher activity attributed to these atoms in the structure. This fact allows one to conclude that, when it comes to nanoparticles of comparable sizes, the spherical ones display the lowest catalytic activity but the greatest stability. Another aspect of this topic is the colloidal stability of nanoparticles, mainly in metal oxides. In water, the most common liquid medium, metal oxide surface chemistry is controlled by the surface hydroxyl groups [42–44]. The following surface equilibrium condition must therefore be considered: + MOH+ 2 MOH + H MOH MO− + H+
(6) (7)
These two conditions of equilibrium are described by pK1 and pK2 values, respectively. The surface charge, together with the zero point of charge or zeta potential (pHζ ), are important properties that determine the stability of a colloid. In principle, the surface area interferes in the absolute number of dispersed charges, but does not affect the zeta potential [45]. However, two effects on this scale are not negligible: the adsorption of any counter ion is enhanced and can shift pHζ in more than two units [45] (this effect was explored by several authors to manipulate nanoparticles by attaching them to organic molecules [46, 47]); and dipole interactions may affect the particle-to-particle interaction [48–50]. The classical equation for the energy of dipole attraction in spheres (aligned dipoles), E = −μD /2πε0 x(x2 − 4R2p )
38
C. Ribeiro and E.R. Leite
(μD is dipole moment and x is the distance between the spheres) shows that this energy can assume significant values in small particles. Estimating these values for CdTe nanoparticles ranging from 2.5 to 5.6 nm in diameter, Tang and coauthors [48] reported values of about 8–10 kJ mol−1 . These values are substantially higher than the regular molecular dipole–dipole attraction (≈1.5 kJ mol−1 ). The authors pointed out that this effect can explain relative orientation in nanoparticulate colloids (such as those reported in the same paper and in others), like “pearl necklaces”. On the one hand, in fact, some papers report ordered agglomeration or significant enhancement of viscosity or rheological properties in nanoparticulate colloids [51,52] when compared with microparticulate in the same solid load [44]. On the other hand, Tohver et al. [53,54] reported that the same charge localization can interfere in the agglomeration of larger particles by repelling others. They observed this behavior in dynamic viscosity measurements in binary colloids of SiO2 microspheres (≈0.285 μ m) and ZrO2 nanoparticles (≈3 nm). The authors proposed that the total interparticle energy Vtotal would have an additional contribution beyond the van der Waals interaction and the repulsive electrostatic potential, a depletion term due to the interaction between the micro and nanoparticles. This interaction implies that the nanoparticles avoided agglomeration of the larger ones, reducing the expected viscosity.
3 Quantum Size Effects Nanoparticles have few atoms that suffice only to form an identifiable (crystal) interior and the interactions among these atoms in a small limited size bring the properties close to the discrete conditions displayed by isolated molecules or atomic pairs. These phenomena are commonly related to quantum size effects, and are revealed mainly in optical and electrical properties. Basic quantum mechanics provides an excellent example of energy level dependence on size: the particle-in-a-box model. For an one-dimensional system, Schr¨odinger’s equation is: h¯ 2 d2 +V Ψ = EΨ, (8) − 2m dx2 where m is the particle mass, V is the potential energy barrier, E is the energy of the particle, and Ψ is the associated wave function. In a box with length L, the general solution for the equation (according to Levine [55]) is given by nπ x , (9) Ψ = 2/L sin L and the energy of the particle is given by E=
n2 π 2 h¯ 2 , 2mL2
(10)
Assembly and Properties of Nanoparticles
39
Fig. 2 The energy of the three first levels (n = 1–3) of a particle with mass = electron mass in a 1-dimensional box with length L. Inside the box V = 0 and outside V = ∞ (the particle is confined in the box)
where n is an integer. The expression shows a strong dependence of the energy level on the size (as seen in Fig. 2): at large L values, all the energy levels tend toward a single level (level superposition), eliminating the quantum regime. Enhancement of the particle energy is easily observed in small sizes. Although the model is commonly referred to as only theoretical, its implications were recently observed through scanning tunneling microscopy (STM) by F¨olsch et al. [56] in linear Cu chains and by Nilius and coworkers [57] in linear Pd chains. The dependence of the length L was observed in both studies, as illustrated in Fig. 2, by the number of atoms in the chain. Another way to explain the influence of size on electronic properties can be through the semiempirical methods utilized to estimate interactions between molecules [55]. In these methods, the contribution of each atom is postulated as α , while the contribution of the interaction with neighboring atoms is postulated as β , and the interactions of nonneighbors are neglected (assumed to be zero). The wave functions will have a number of solutions equal to the number of atoms in the molecule. The general solution for the energies is given by Ek = α + 2β cos
kπ , N +1
(11)
where N is an integer and k = 1 · · · N. Let us assume a particle with N equal atoms and two energy levels – a fundamental level and an excited one, with α , α and β , β ,
40
C. Ribeiro and E.R. Leite
respectively. The Fermi energy depends only on the density of electrons n, following a free-electron model (EF = h¯ 2 (3π 2 ne /2m)2/3 ) and is therefore independent of the particle size [58]. However, small particles have few conduction electrons ne and a smaller number of electronic states at T = 0. Since the density of electronic states is proportional to the volume, the space between the filled states, δ , is inversely proportional to the particle size – for spherical particles, the level spacing scales with d −3 . More precisely, δ = 4EF /3ne . Now let us take a single particle at a given temperature where kB T δ (where kB is the Boltzmann constant). In this situation, the Fermi energy would probably be found in a gap between adjacent levels, and the particle would reveal a nonmetallic state. For a semimetal (such as carbon), this feature is clearly visible in a qualitative plot of the (11) for k = 1 and k = N in the two cases (fundamental and excited), as shown in Fig. 3. As can be seen, the metallic behavior appears only in a cluster with a significant number of atoms; in the presence of fewer atoms, the particle’s behavior is similar to that of a semiconductor, i.e., it shows a forbidden band dependent on the number of atoms in the particle. The discreteness of the electronic level structure was discussed in detail by Kubo and Kawabata [59, 60], and reviewed by Halperin [58]. In semiconductors, the existence (even in the bulk) of the characteristic band gap requires a better understanding of the conduction mechanism, which differs entirely from that of metals, to describe their quantum size effects [61–63]. By definition, the band gap is the energy necessary to create an electron (e− ) and hole (h+ ). Thus, the ionization potential Ei of a semiconductor can be treated as Ei = Eg + Ea , where Eg is the band gap energy and Ea is the ionization energy from the edge of the conduction band [61].
Fig. 3 Diagram of levels in a single-atom metal according to semiempirical methods
Assembly and Properties of Nanoparticles
41
The S eigenfunctions (in spherical coordinates) and their energy levels in a charged particle (electron or hole) with effective mass m∗ confined in a spherical well of infinite depth and radius Rw are defined in classical quantum mechanics by the equations Ψn (r) = C En =
sin(nπ r/Rw ) , r
h¯ 2 π 2 n2 . 2m∗ R2w
(12) (13)
The internal motion in a small particle can be interpreted by a specific eigenfunction, Φ, given by a direct expansion of Ψn , as defined by (12). Assuming some error, we can write Φ ≈ Ψ1 + ∑ Ψn , or, for the total energy E≈
h¯ 2 π 2 n2 e2 + P, ∗ 2 2m Rw 2Rw
(14)
where P is an average over the 1S function [61]. This interesting result is equal to the ionization potential or electron affinity of a small particle with radius Rp (making Rw = Rp ). Both terms decrease with the size Rp of the particle, and the charge – the electron or the hole – is less stable in small sizes. Consequently, the barrier to the ionization Ea lowers with size. However, the small size implies the approximation of the carriers (e− and h+ , with radius re and rh , respectively), which may form a bond state, an exciton [64]. On the basis of this assumption, the pair can be described approximately by a hydrogenic Hamiltonian [62–64]: 2 2 e2
= − h¯ ∇2h − h¯ ∇2e − H , 2mh 2me ε |re − rh |
(15)
where mh , me are the effective masses of the hole and electron, and ε is the semiconductor dielectric constant. By analogy, the band gap energy is the ionization limit of the hydrogenic electron–hole bound states. In small sizes (assumed to be spherical), one must consider polarization terms due to the Coulomb interaction in the presence of the crystalline surface. Hence, the Schr¨odinger equation is written as follows h¯ 2 h¯ 2 − +V0 (Se , Sh ) Φ((Se , Sh ) = EΦ(Se , Sh ), (16) − 2me 2mh where Se and Sh are the electron and hole positions inside the sphere (V0 is considered infinity outside the sphere). At small values of Rp , the eingenfunction will be dominated by the carrier confinement, and the solution can be obtained by the variational method using the S wave function for a particle in a sphere (12 and 13) as a tentative function. Thus, the simple uncorrelated function may be an acceptable approximation (especially for direct-gap semiconductors):
42
C. Ribeiro and E.R. Leite
Φ0 = Ψ1 (Se )Ψ1 (Sh ).
(17)
In this condition, and using the reduced mass of the electron–hole pair μ , one has the effective band gap energy, E eff (keeping in mind that the energy of the lowest excited state E is the shift of Eg , i.e., the bandgap energy): E eff = Egap + E = Egap +
h¯ 2 π 2 n2 1.8e2 e2 + Ψ1 . − 2μ R2 εR R
(18)
The first term represents the quantum energy of carrier confinement or localization, and the second term represents the Coulomb attraction. The third term is the energy loss given by the solvation in the surrounding medium, and will depend not only on the semiconductor’s dielectric constant, ε , but also on that of the surrounding medium. Ψ1 is an average sum over a Ψ1 function [62]. Finally, the diameter-range where these size effects are expected can be determined by an exciton Bohr radius, as follows [64]: aB = ε
h¯ 2 . μ e2
(19)
When the crystal size approaches aB , the pair becomes confined and the effects are observable. This model is a simplification, since other correlation functions (with more complex solutions) are possible. However, several experimental works have demonstrated the validity of the expression for near-spherical nanoparticles [65–79]. More complex solutions may be necessary for anisotropic shapes, as experimentally demonstrated by Buhro and Covin [80] for InAs. In general, the third term of (18) is neglected and the second term is only significant when aB ≤ Rp [79]. In these particles, the mode is known as strong confinement, whereas for larger, albeit still small particles, the mode is known as weak confinement [64]. Rossetti and coworkers [65, 66] compared experimental results of absorbance in the UV–Vis range for CdS and ZnS nanocrystals in colloidal suspensions with predictions from classical Mie scattering theory [81], using bulk crystal properties. This theory provides an exact solution to Maxwell’s equations, assuming that small crystallites are characterized by the same wavelength-dependent dielectric constant as that of the bulk material. For particles that are much smaller than the optical wavelength λ in the external medium, only the electric dipole term needs to be considered and the crystallite absorption cross section is given by σ = (8π 2 R3 )/λ · ℑ[(ε − 1)/(ε )]. ε is the ratio of the complex dielectric coefficient of the bulk crystal to the real dielectric coefficient of the external medium. Although the authors found a general shape congruent with the spectra obtained with the Mie curves, some unpredicted plateaus or peaks were observed, and the curves were displaced to higher energies, indicating that the small particles had higher band gap energies than the bulk. The peak was subsequently reported to be a resonance peak resulting from the creation of the electron–hole pairs [63, 64, 82]. The authors concluded that the classical treatment of the Mie theory was invalid, since ε is a collective property of the macroscopic material (the small crystal does not support the
Assembly and Properties of Nanoparticles
43
continuous distribution of electron or hole momenta due to the boundary conditions imposed by the surface). Using (18), the authors estimated the effective band gaps of some particle sizes ranging from 2 to 7.5 nm, concluding that the observed spectra was the sum of widely differing spectra corresponding to various sizes. They pointed out that the model predicts that the absorption coefficient is independent of size, and that the crystallite size distribution itself should be used to predict the experimental absorption threshold data. In fact, the broadening of particle size distribution can interfere sufficiently in the absorbance spectrum near the onset to deviate gap measurements significantly by the onset of extrapolation. Pesika and collaborators [77, 78] proposed the inverse observation, i.e., particle size distribution by absorbance spectra measurements. The absorbance A at any wavelength λ in the quantum regime is related to the total volume of particles with radius greater than or equal to the size corresponding to the onset of absorption, in a diluted concentration limit (absorbance will occur continuously since the critical size is reached). For spherical particles, assuming that the absorption coefficient is independent of particle size, we have A(r) ∝
∞ 4 Rp
3
π R3p n(Rp )dRp ,
(20)
where n(Rp ) is the particle size distribution. The expression can be rearranged, keeping in mind that when r → ∞, n(Rp ) = 0: n(Rp ) ∝ − 4
dA dRp
3 3 π Rp
.
(21)
The derivative dA/dRp is obtained by the slope of the absorbance curve (converting the energy axis to Rp using (18)). The authors tested the assumptions on ZnO nanoparticles, comparing them with direct size measurements by TEM. A good agreement with the statistical data was achieved; however, considerable deviations were observed in very small radii. The effect was explained by the resonance exciton peak, more pronounced for sharp particle size distributions. On the basis of these observations, the authors concluded that only small fractions of the overall distribution are affected and, in many cases, the exciton’s contribution is negligible. This deviation is observed in SnO2 nanocrystals: the very small calculated Bohr radius (aB ≈ 2.7 nm) implies that, in most cases, the experimentally detectable effects are related to a weak confinement regime. Absorbance measurements in water were carried out on nanoparticles synthesized by the hydrolysis of hydrated SnCl2 and were compared with size distribution measured by TEM (at least 200 particles), as illustrated in Fig. 4 [83]. An acceptable agreement was found for particles over 1.3 nm, but the smaller ones were not detected. According to Pesika, the results were probably strongly affected by the sharp exciton peak (at 283 nm, in the inset of the graph). The case of SnO2 illustrates the experimental problems observed in width gap materials (as is the case of many oxides), for it is sometimes difficult to make a
44
C. Ribeiro and E.R. Leite
Fig. 4 Comparison between statistical measurement of SnO2 particle sizes by TEM and absorbance spectra derived distribution (21). On the inset, the obtained absorbance spectra, showing the sharp exciton peak [83]
good estimate of the band gap. The confinement effect in this oxide was studied by photoluminescence measurements, with better results for the average particle size in several conditions. The photoluminescence peak was considered a good estimate of the band gap, since it relates to the emission of the lower excited level to the ground state, whereas absorbance of the photon will occur continuously, as discussed earlier herein. The results depicted in Fig. 5 show a good congruence with the theory and also the weak confinement regime in this oxide.
4 Phase Stability and Transformation Something commonly seen in the synthesis of nanomaterials is that many metastable structures appear stable in the nanometric range. A typical case is the synthesis of TiO2 polymorphs. TiO2 has three crystalline polymorphs, anatase, brookite, and rutile [84]. Although several papers report on the synthesis of nanocrystalline anatase [12, 85–89], few report on nanocrystalline rutile [90, 91] as an example. However, several papers state that the rutile formation passes through the three metastable phases, and it has been established that rutile is the most stable TiO2 polymorph (observations of micrometric anatase are scarce) [92–96].
Assembly and Properties of Nanoparticles
45
Fig. 5 Comparison between application of (18) to tin dioxide and experimental data – Eeff g obtained by photoluminescence emission and particle radius by TEM measurements (from Lee et al. [79]). The inset in the figure shows an scheme of the photoluminescence emission (adapted from [82])
It is well known that crystallization generally follows a sequence of metastable phases before the most stable phase is attained (known as Ostwald step rule) [94,97]. Although this final crystalline polymorph is the most thermodynamically stable, the others are often only slightly metastable by a few kilojoules per mole. One must keep in mind that the stability of a given nucleus or small cluster (in homogeneous nucleation) is given by the balance between the free energy of formation, ΔGV , and the work given by the new surface, γ A (the product of the surface free energy and the surface area), as follows for a sphere [23, 97, 98] 4 ΔG = − π R3p .ΔGV + 4π R2p γ . 3
(22)
Making the first derivative of the expression equal to zero, d(ΔG)/dR = 0, we have the minimum ratio for a stable nucleus (Rp,crit ): Rp,crit =
2γ . ΔGV
(23)
At this moment, we can consider that ΔGV is independent of size (we will further analyze the equation later on herein). On the basis of this assumption, phases with higher γ values will need larger nucleus to become stable in solution or melt. Thus, the immediate problem is to determine the surface energy of polymorphs.
46
C. Ribeiro and E.R. Leite
Table 1 Surface enthalpies and transformation enthalpies relative to bulk stable polymorph for oxides (adapted from Navrotsky [94]) Oxide
α -Al2 O3 γ -Al2 O3 TiO2 rutile TiO2 brookite TiO2 anatase ZrO2 monoclinic ZrO2 tetragonal ZrO2 amorphous Zeolitic SiO2 SiO2 amorphous
Surface enthalpy (J m−2 )
Transformation enthalpy (kJ mol−1 )
2.6 ± 0.2 1.7 ± 0.1 2.2 ± 0.2 1.0 ± 0.2 0.4 ± 0.1 6.5 ± 0.2 2.1 ± 0.05 0.5 ± 0.05 0.09 ± 0.01 0.1
0 13.4 ± 2.0 0 0.7 ± 0.4 2.6 ± 0.4 0 9.5 ± 0.4 34 ± 4 8–15 9
Calorimetric measurements are a way to determine this property [84, 99]. At room pressure, the effect of the volume variation, PΔV , is expected to be small, and the surface entropy is also expected to be slight. On the basis of this assumption, the surface free energy can be approximated to the surface enthalpy (the variable that is properly measured in calorimetry). Table 1 shows surface enthalpies and transformation enthalpy data for some oxides and their polymorphs. An initial analysis of the data reveals (in accordance with the literature) that the surface enthalpy (or energy) decreases as the phase becomes more metastable (higher transformation enthalpy relative to the bulk stable polymorph), i.e., smaller surface energies lead to lower barriers to stabilization [93, 94]. This analysis (albeit not at all correct) indicates that metastable phases tend to nucleate more easily than stable ones, so it is coherent with Ostwald’s step rule. We can interpret the same result by stating that metastable phases have a lower activation energy ΔG∗ , obtained by substituting the value Rp,crit in (22) [23, 97]: 16πγ 3 ΔG∗ = (24) 3ΔG2V In a reactional medium (such as water, for several materials), the competition between dissolution and reprecipitation renders this interpretation more complex. Even though the main ideas remain valid, the first stages of the formation of a crystal may be the coalescence of two fairly large clusters, eliminating water, protons, and OH − groups from the surface [2, 94]. This step – often referred to as polycondensation [43,100] – has no clear activation energy and may differ significantly from classical nucleation. Hence, a conclusion dictated by common sense may hold true in some cases: the metastable structure of the nanoparticle comes from a memory of the precursor or, in the case of amorphous nanoparticles, the precursor nanostructure constrains the atoms in positions such that crystallization is impossible. At the surface, the low coordination of atoms unbalances the bonding forces and generally causes any phase transformation to be easier at the surface. Under such conditions, phase transformations will depend on particle–particle contact,
Assembly and Properties of Nanoparticles
47
while the kineticrate constant of the process may also be size-dependent (as shown experimentally) [92, 101–107]. The unbalanced forces in small particles can be understood as an excess of pressure upon the whole solid particle, and may be approximated using such expressions as Laplace-Young’s equation [92, 108, 109]: Peff =
2σ , Rp
(25)
where σ is the surface tension. Zhang and Banfield [92] assumed that the increase in activation energy would be proportional to the excess pressure, Ea = E∞ +CPeff = E∞ +C Rp , where Ea is the effective activation energy, E∞ is the bulk energy activation, and C, C are proportionality constants. The authors confirmed this assumption for the transition of TiO2 -anatase to rutile in the 5–100 nm range, with a good correlation. The difference in Ea to the total range was ≈60 kJ mol−1 , a significant value in view of the estimated bulk activation energy (E∞ = 185 kJ mol−1 ). Excess pressure is also observable in pressure-driven phase transformations. Tolbert and Alivisatos [2, 110, 111] showed that a significant increase in pressure induced wurtzite to transform into rock salt (from the less dense to the denser phase) in CdSe nanocrystals, following a scaling law of the type Ptransf ≈ 1 + C /Rp . They observed an increase of ≈35% in transition pressure in 10 nm nanoparticles in relation to 21 nm nanoparticles (3.6–4.9 GPa). The transformations were found to be fully reversible, albeit with some hysteresis, showing an energy barrier to direct transformation, which is coherent with the excess pressure at the surface. However, other factors may predominate and may also be related to the aforementioned phenomena. Solid surfaces of different crystallographic orientations have different surface energies and different affinities for absorbed ions and molecules [112] (as exemplified for SnO2 , in Table 2 [113–116]). The fact is that shape is an important variable in the stability of nanocrystals, since the total amount of surface energy depends on the exposed crystallographic planes [117]. To adapt this feature, Barnard and Zapol [109] proposed a general model for the phase stability of any nanoparticle based on the Gibbs free energy of an arbitrary particle. According to the authors, the correct treatment of the free energy must include contributions from the edges and corners rather than only from the bulk and surface. As an example, a Si cubic nanocrystal with 200 atoms will have 9% of the
Table 2 Surface energies for SnO2 calculated for several crystallographic planes in vacuum (adapted from Beltran et al. [113]) Surface (110) (010), (100) (101), (101) (201) (001)
Ref. [113]
Ref. [114]
Ref. [115, 116]
1.20 1.27 1.43 1.63 1.84
1.04 1.14 1.33 – 1.72
1.30–1.40 1.66–1.65 1.55 – 2.36
48
C. Ribeiro and E.R. Leite
atoms in edges; with 103 atoms, 4% will be in the edges and with 105 only 0.3% will remain. These estimates highlight the importance of the small terms, in some cases. For a given x nanoparticle, the free energy can be expressed as a sum of individual contributions, i.e., + Gsurface + Gedge + Gcorners . G0x = Gbulk x x x x
(26)
The first term is defined as the standard free energy of formation, Gbulk = x ΔG0x (T ), which is dependent on the temperature. The second term is expressed in terms of surface energy γi for each i plane on the surface and molar surface area A. Using the relations of density ρ , molar mass M and surface to volume ratio q, one has M = γ (T )A = q ∑ fi γi (T ), (27) Gsurface x ρ i where fi is a weight factor of the facets i in the crystal (∑ fi = 1). In the above formulation, the expression takes into account the crystallographic alignment of the properties and, indirectly, the shape. The edge and corner energies can be described by similar expressions: = ξ (T )L = Gedge x
M p g j ξ j (T ), ρ ∑ j
(28)
Gcorner = τ (T )W = x
M w hk τk (T ), ρ ∑ k
(29)
where ξ (T ), τ (T ) are the edge and corner free energies, L is the total length of edges and W is the total number of corners, p, w the edge and the corner to volume ratios, and g j , hk weight factors. Substituting and rearranging the terms, (26) becomes G0x = ΔG0x (T ) +
M q fi γi (T ) + p ∑ g j ξ j (T ) + w ∑ hk τk (T ) . ρ ∑
(30)
However, as proposed by Zhang and Banfield [92], the effective pressure must be taken into account. The volume dilation ed is given as ΔV = ed = Peff βV , V
(31)
where βV is the material’s compressibility. Peff can be estimated by (25) above. Although it is known that σ = γ + A(∂ γ /∂ A), when the dependence of γ on A is small, the approximation σ = γ is acceptable. The anisotropy should be included in the determination of γ , as done in (27). Using these approximations, (30) becomes
M 2βV σ G0x = ΔG0x + q ∑ fi γi + p ∑ g j ξ j + w ∑ hk τk . (32) 1− ρ R
Assembly and Properties of Nanoparticles
49
Table 3 Surface free energies γ (in J m−2 ), for the clean, partially hydrogenated and fully hydrogenated low index surfaces of TiO2 anatase and rutile (adapted from Barnard and Zapol [96]) Anatase
Rutile
Surface
Clean
Partial
Full
Surface
Clean
Partial
Full
(001) (100) (101)
0.51 0.39 0.35
0.86 0.55 0.51
0.84 0.65 0.63
(100) (110) (011)
0.60 0.47 0.95
0.71 0.56 1.02
1.82 0.84 1.19
Although the Laplace–Young equation (25) is only applicable to spherical particles, the approach was tested successfully in simulations for Si, Ge, nanodiamonds, and TiO2 polymorphs. The authors predicted faceted shapes (e.g., cubes or tetrakaidecahedrons) as preferred shapes in very small sizes for most cases, which is contradictory to common sense (i.e., spheres). This strong dependence on surface, corner, and edge energies can induce unexpected phase transformations through interactions with the medium. Gilbert et al. [118–120] reported the reversible transition of ZnS wurtzite to a structure close to spharelite by the gradual substitution of methanol medium (from synthesis) by water. The authors explained the water-driven transformation through MD simulations, showing that interactions between water and ZnS reduce the surface energy. This aspect can be explored by including the contribution of absorbed ions or molecules at each surface i, i.e. [96, 121], 1 (33) γi = A · ENsurf − NE bulk − Ny μy , 2 where ENsurf and E bulk are the total energy for the surface and bulk for a given area A, N is number of units in the stoichiometric cell (considering a minimal slab), Ny is the number of absorbed molecules or ions and μy is the chemical potential of the y molecule or ion. Taking in account these parameters, the surface energies for some crystallographic planes of clean, partially and fully hydrogenated TiO2 anatase and rutile were obtained by density functional calculations (as shown in Table 3 [96]). The slight variations of some values caused by ion adsorption can be extremely significant in small particles and in anisotropic shapes, as experimentally observed.
5 Synthetic Methods After reviewing the fundamentals of nanoparticle properties, in the following sections we discuss some of the fundamentals involved in nanoparticle synthesis, and review some methods commonly employed to produce such particles, with emphasis on methods for synthesizing nanoparticles for energy purposes.
50
C. Ribeiro and E.R. Leite
5.1 Nucleation and Growth Many of the synthesization methods to produce nanoparticles are based on coprecipitation steps, or nucleation and growth in reactional media [98, 108]. Precipitation reactions involve the simultaneous occurrence of these steps, as well as coarsening and agglomeration processes [122, 123]. Because of the difficulties in isolating each process for independent study, the fundamental mechanisms of precipitation are still not entirely understood. However, a good understanding of the nucleation step is fundamental for grasping the nature of nanosize particles. In the section below, we discuss the correlation between the critical nucleus and surface energy (23). A more complete analysis of precipitation must take into account the chemical potential of the nucleus formed in equilibrium with the reactional media. In such a condition, the nucleus possesses free Gibbs energy, as follows [23, 98, 108, 124]: (34) dG = μ0 dn + ∑ γi dSi , i
where μ0 is the chemical potential of the bulk nucleus, n is the number of moles, γi is the surface energy and Si is the area for each surface i. The equation can be rearranged to dSi . (35) μ = μ0 +Vm ∑ γi dV i since dn = dV /Vm (where Vm is the molar volume). For a particle of any shape, the surface area Si and the volume V can be written as generic equations for a given Z characteristic dimension, as follows: Si = κi Z 2 ,
(36)
V = ςZ .
(37)
3
where κi are ς are geometric constants. Taking the derivative of the two expressions as Z, and applying it to a chain rule, one has: dSi /dZ dSi 2Si = = . dV /dZ dV 3V
(38)
As proposed by (27), the surface energy can be inserted as an average surface tension. Here we will not consider the contributions from edges and corners, although this contribution (as discussed) may be important. For the sake of simplicity, we can rearrange the expression as follows:
γ=
∑ γi Si . ∑ Si
(39)
Inserting the (38) and (39) into (35) and rearranging them, one has:
μ = μ0 + αF
2Vm γ , 3Z
(40)
Assembly and Properties of Nanoparticles
51
where αF is a shape factor defined as ∑ κi /ς . This equation describes the chemical potential of the formed nucleus. The chemical potential of the substance μ (or reactional product) in solution or melt is
μ = μ0 + RT ln a,
(41)
where R is the universal gas constant, a is the activity in solution, and μ0 is the standard chemical potential in solution. We can assume that the standard chemical potential μ0 in the particle is μ0 = μ0 + RT ln a0 , where a0 is the saturation activity. Comparing the equilibrium condition for precipitation, i.e., μ = μ , and rearranging it, one has: 2Vm γ a . (42) ln = αF a0 3ZRT This equation is remarkable, since it describes a general form to express the relation among surface energies, chemical potential and dimension Z. For a spherical particle, Z = Rp and αF = 3, (42) reduces to Rp =
2Vm γ , RT ln aa0
(43)
which is easily compared with (23). The approximation in the equation of activity to the concentration, a ≈ c, is usual and commonly accepted as valid. We can correct the set of equations to consider the reduction of surface energy by contact with other surfaces (which represents a heterogeneous nucleation process) by substituting γ to γeff , an effective surface energy obtained by contact with another surface [125]. Applying the geometric relations of the contact with a cluster and a surface, we can consider the decrease of activation energy to nucleation (as given in (24)), i.e., ΔG∗het = ΔG∗ (2 + cos θ )(1 − cos θ )2 )/4, where θ is the contact angle with the two surfaces. The heterogeneous nucleation is preferable only if the geometric relation is less than 1. While the nucleation process takes place, the growth process can be concurrent in some ways: transport of reactive species in solution, adsorption in the crystal– solution interface, interface reactions – in each case, the growth corresponds to the ordering of ions or molecular species (monomers) over the nucleus surface [42, 124, 126–128]. The growth rate is governed by empirical power laws, which are described as a function of the slowest mechanism present [129, 130]. To obtain nanoparticles in solution, it is usually necessary to stop the growth mechanisms or at least to control them to prevent uncontrollable growth and, hence, undesirable particle sizes. All the reactional parameters can be controlled by the proper selection of reactant relations [43,131]. As an example, in precipitation by hydrolysis, a large excess of water in relation to the metal source reactant leads to nanoparticles due to the fact that all the monomers present in solution are captured in primary nucleus – also, in these cases, the initial particle size is closer to Rp,crit . Special cases that must be analyzed are the growth mechanisms in equilibrium, i.e., not dependent on reactional processes but dependent on diffusional parameters
52
C. Ribeiro and E.R. Leite
and on the particles’ relative mobility. Initially, (43) can be rearranged assuming the activity a is equal to the solubility of the formed particle Sp , and the saturation activity a0 as the bulk solubility Sb,0 [70]: 2Vm γ 1 Sp = Sb,0 exp . (44) RT Rp This relation, widely known as the Ostwald-Freundlich equation, describes the dependence of the solubility of a formed particle on its size. This dependence is particularly important in very small particles, since dissolution and reprecipitation phenomena can easily occur [132]. Usually the argument in exponential terms is too small, and the equation can be linearized to Sp ≈ Sb,0 · (1 + 2Vm γ /RT ) · 1/Rp . If particles dissolve and grow readily without being limited by the rate of interfacial reactions, the growth rate of the particles is likely to be limited by diffusion through a surrounding medium and can be described by Fick’s first law. This supposition is clearly valid in colloids and in reactional media. A convenient form of Fick’s first law for a particle in a diffusion field is given as (in spherical coordinates) [133]: 4π R2p
dRp dc = D4π r2 , dt dr
(45)
where D is the diffusivity and dc/dr is the gradient in concentration at distance r. Considering that, in a distance r Rp , the solubility is the same as that of the average particle size (Rp ), (45) can be rewritten for evaluation at r = Rp , after integration of the right-hand side:
dRp D 1 c0 D 2Vm γ 1 =− c(Rp ) − c(Rp ) = − − . (46) dt Rp Rp RT Rp Rp The concentration values are substituted by using (44) linearized, assuming c = Sp and c0 = Sb,0 . Figure 6 shows a schematic distribution of growth rates for some arbitrary values of particle radii. Clearly, the maximum growth rate will occur in a defined range of particles. If we take the second derivative d2 Rp /dt 2 = 0, we discover that, when Rp = 2Rp , we have the condition of maximum growth rate, as plotted in Fig. 6 by the straight line. If we assume that growth (in a closed system) is governed by the fastest growing particles, we can write dRp = dRp . Substituting these values in (46) and integrating them, we obtain [23, 125, 134]: 3
3
Rp − Rp,0 =
3c0 DVm γ t. 4RT
(47)
This growth mechanism, known as Ostwald ripening, provides a good description of the growth behavior of a wide range of nanoparticles [71, 76, 135–137]. A thorough analysis of the fundamental equations (44 and 45) leads to a general expression of the type [138–140] n
n
Rp − Rp,0 ∝ t,
(48)
Assembly and Properties of Nanoparticles
53
Fig. 6 Growth rate in Ostwald ripening of particles with arbitrary radius. The straight line refers to the maximum growth rate, when Rp = 2Rp
where n is an exponent dependent on the boundary conditions assumed in the growth [137, 139]: for n = 2, it is inferred that crystal growth is controlled by ion diffusion throughout the particle to its vicinity (the solution of a matrix, in solid compounds); for n = 3, the growth is controlled by the volume diffusion of ions in the vicinity; and when n = 4, it is deduced that growth is controlled by dissolution kinetics at that particle–vicinity interface. Despite the good applicability of the Ostwald ripening model, recent studies have demonstrated that this mechanism cannot be considered responsible for the growth process in some systems [141–145], since the main postulates of the theory are frequently neglected. The oriented attachment mechanism was proposed as another significant process, which may occur during nanocrystal growth [146–150]. By this mechanism, nanocrystals can grow by the alignment and coalescence of neighboring particles, by eliminating a common boundary. The driving force for this mechanism is clearly the decrease in the surface and grain boundaries’ free energies. By the localized nature of oriented attachment, the mechanism leads to the formation of nanoparticles with irregular morphologies, which are not expected in precipitation-based growth. Several studies indicate that oriented attachment is very significant, even in the early stages of nanocrystal growth, and may lead to the formation of anisotropic nanostructures in suspensions, such as nanorods, by the consumption of nanoparticles as building blocks [48, 151–154]. This mechanism has already been theoretically studied [155–158] and experimentally observed in micrometer-sized metallic systems for several years [159–162]. Recently, it was modeled by Moldovan et al. [163–166], investigated by molecular dynamics
54
C. Ribeiro and E.R. Leite
studies [102, 128, 167, 168], and confirmed experimentally [169–172]. In all of the above-mentioned theoretical studies, the authors assumed that the nanoparticles were in contact with each other. Oriented attachment occurred by means of relative rotations between the particles or by plastic deformation associated with displacement motion, until a thermodynamically favorable interface configuration (i.e., crystallographic alignment) was reached. Figure 7 shows the oriented attachment of a SnO2 nanoparticle on the surface of a SnO2 nanoribbon. Edge discordances in the nanoparticle–nanoribbon interface evidence the attachment. However, in nanoparticle synthesis, an aspect of particular interest is controlled growth under colloidal conditions. Considerable efforts have reportedly been dedicated to building adequate models to describe the coalescence of nanoparticles in suspension and at surfaces [173]. Penn and Banfield proposed that dispersed nanoparticles can be treated as molecules or molecular clusters [142] in solution. This treatment was already used by Huang et al. [104, 174] in the development of a kinetic model serving to explain ZnS nanoparticle growth induced by hydrothermal treatments. Penn also developed a kinetic model for oriented attachment growth, considering the electrostatic interaction between particles in solution [175]. Ribeiro et al. [176] proposed another mechanism for oriented attachment growth in dispersed nanoparticles. The authors considered that coalescence may also occur
Fig. 7 Example of a SnO2 nanoparticle attached to a single-crystalline surface (a SnO2 nanoribbon) by the oriented attachment mechanism
Assembly and Properties of Nanoparticles
55
when particles with similar crystallographic orientations (or with slight differences) collide, which explains the growth behavior in SnO2 colloidal suspensions. This mechanism is based on the assumption that nanoparticles dispersed in a liquid medium present a very high degree of freedom for rotation and translation motions. Hence, in suspensions where agglomeration does not take place, growth by means of oriented collisions should be more effective than by surface mechanisms (i.e., coalescence induced by relative rotations between particles in contact). Dispersed nanoparticles should present a high velocity in response to the Brownian motion, so nanoparticles in suspension are expected to present a high frequency of collisions. Therefore, growth by coalescence may be interpreted statistically, since collisions can be considered effective (i.e., leading to coalescence) or ineffective (i.e., an elastic event). This mechanism is similar to Smoluchowsky’s coagulation model [126,177–182], which is extensively used to explain polycrystalline colloidal growth and aggregation mechanisms in suspension. If we assume that all of the aforementioned considerations are valid, the coalescence of two particles in suspension may be interpreted as the following chemical equation 49: k
A + A −−−→ B
(49)
where A is a primary nanoparticle and B is the product of coalescence of two nanoparticles. Figure 8 shows a generic scheme of the two proposed ways in which the oriented attachment mechanism works. Several papers have discussed the role of oriented attachment in the anisotropic growth of nanocrystals. A recent paper by Cho and coauthors [50] discusses the oriented attachment process as the main mechanism involved in the construction of anisotropic PbSe nanocrystals in several shapes. The authors used the proposition of
Fig. 8 Scheme of oriented attachment mechanism: a attachment by collision of two particles with similar crystallographic orientations; b attachment induced by rotation and alignment of particles in contact
56
C. Ribeiro and E.R. Leite
the alignment of preformed nanoparticles by dipole–dipole interactions as the mechanism responsible for the anisotropy associated with the attachment (as discussed before). The process was observed concomitantly to the synthesis of the nanocrystals. A similar experiment was proposed by Yu et al. [183] for the synthesis of ZnS. The authors suggested that the formation of ZnS nanorods occurred through the oriented attachment of spherical nanoparticles formed in a precursor solution to preformed nanorods in solution. An interesting feature was the subsequent coarsening (Ostwald ripening) of the final nanorods, smoothing the nanoribbon surface. Anisotropic nanoparticle shapes are often desirable in charge-carrier devices such as solar cells or electrodes [184, 185]. A strategy developed by Vayssieres [186–195], called purpose-built materials (PBM), appears to be a promising route for growth-oriented 3D crystalline nanorods in several kinds of substrates. This strategy allows one to obtain 3D arrays of several semiconducting metal oxides using controlled aqueous chemical processing at low temperatures (usually in the range of 90–95◦ C) and inexpensive precursors [194]. The PBM strategy is based on the heterogeneous nucleation of the desired phase on a substrate. The substrate decreases the activation energy in the crystallization process, promoting heterogeneous nucleation at the surface of the solid. The kinetics of nucleation and growth is controlled by the temperature and the hydrolysis rate, whereby the nucleation and growth processes can be separated. The experimental conditions are adjusted to obtain the most stable thermodynamic structure. The growth mechanism is controlled basically by a dissolution–precipitation process, and the direction of crystal growth is controlled by the surface energy of the oxide crystalline phase. This argument explains the epitaxial growth of single-crystalline metal oxide nanorods perpendicular to the substrate. This growth process is usually associated with the Ostwald-ripening mechanism, but the oriented attachment mechanism may be involved.
5.2 Synthesis of Transition Metal Nanocrystals The development of metal nanocrystals is fundamental for devices where catalytic heterogeneous reactions take place, such as fuel cells. The bottom-up methods of wet chemical nanocrystal synthesis are based on the chemical reduction of the salts, or the controlled decomposition of metastable organometallic compounds in an organic or water solution. These reactions are always carried out in the presence of a large variety of stabilizers, which are used basically to control the growth of the initial nanocluster and to prevent particle coagulation or agglomeration. As discussed, the mechanism of nanoparticle formation is generally based on a process of nucleation, growth, and agglomeration. This process was proposed by Turkevich and is based on the synthesis of metal nanoparticles by salt reduction [34,196]. This model still is valid and has recently been refined. A recent review authored by B¨onnemann and Richards [197] contains a good discussion about the refined model, and supplementary references on this subject are also available.
Assembly and Properties of Nanoparticles
57
Since nanocrystals are unstable from the standpoint of agglomeration and bulk, coagulation and agglomeration are the paths that nanoparticles follow to decrease their high surface area, thus becoming more stable. In the absence of any extrinsic impediment, the unprotected particle coagulates, basically under the action of van der Waals forces. To prevent the coagulation process from occurring, the particle surface can be protected by electrostatic stabilization and/or steric stabilization [44]. Electrostatic stabilization is based on the Coulombic repulsion between particles, promoted by a double layer composed of ions adsorbed on the particle surface. The electrostatic stabilization process can be modified by several parameters, such as ionic strength of the dispersing media, ion concentration, and the presence of neutral adsorbate, which may replace the adsorbed ion on the particle surface. Steric stabilization is based on the steric hindrance caused by organic molecules that are attached to the particle surface, forming a protective layer that prevents particle coagulation or agglomeration. This type of stabilizing system can be viewed as a nanocomposite material, since the organic layer forms a nanometric scale second phase [198, 199]. Several kinds of protective groups can be used as steric stabilization agents, among them polymers and block-polymers, P, N, and S donors (phosphanes, amines, thioethers), surfactants, organometallic compounds, and solvents. A detailed description of the several types of steric stabilizers used during the synthesis of metal nanocrystals is given by Bradley [42]. The synthesis of transition metal nanocrystals can be divided basically into two major groups: salt reduction and decomposition method. Examples of these methods are described below. The salt reduction method is a process whereby a reduction agent reduces the metal salt, in solution, to metal. These reactions can be done in water or in an organic solution. In an organic solution, the solvent can also act as a reduction agent. Alcohols are generally useful reduction agents, particularly hydrogen-containing alcohols. In this process, the alcohol is oxidized to the corresponding carbonyl group. An example of this kind of synthesis is the processing of palladium nanoparticles through the reduction of palladium acetate by methanol [200]. Teranishi and Miyake [37] reported on the reduction of H2 PdCl4 by alcohols to synthesize Pd nanoparticles, demonstrating that the mean diameter of Pd nanocrystals can be controlled from 1.7 to 3.0 nm in a one-step process by changing the amount of protective polymer, poly(N-vynil-2-pyrrolidone) (PVP) and the kind and/or concentration of alcohol in the solvent. The solvent they used was water. They also showed that the reduction rate of [PdCl4 ]− ions is an important factor in the production of smaller Pd particles. The reduction rate was controlled using different kinds of alcohol. The reduction of metal salts by the addition of a reducing agent in a nonreducing solvent is a well-established synthetic route for the preparation of aqueous suspensions of metal nanocrystals. Faraday, for instance, used phosphorous vapor to promote the reduction of [AuCl4 ]− in aqueous solution to synthesize gold nanoparticles [8]. Different kinds of reducing agents have been used to process gold nanocrystals, allowing for the processing of particles ranging from 1 to 100 nm in diameter. Turkevitch and coworkers [196] established the first reproducible standard protocol for the synthesis of gold nanoparticles. Their processing
58
C. Ribeiro and E.R. Leite
of gold nanoparticles by the reduction of [AuCl4 ]− with sodium citrate, for example, became a standard for histological staining applications [201] and for undergraduate experiments in surface and nanomaterials chemistry [202]. Platinum nanoparticles can also be synthesized by the reduction of metal salts, using a reducing agent [36, 203]. Van Rheenen et al. [203] demonstrated that the morphology of platinum particles could be controlled by controlling the synthetic parameters, such as temperature, protective polymer, time, pH, reagent concentration, and the sequence of reagent additions. These authors used various reducing agents and chloroplatinic acid as platinum salt. An interesting synthetization route was recently developed based on the reduction of organometallic compounds by dihydrogen at low pressure and temperature [204–208]. The organometallic compounds used were low-valent alkene or a polyene complex of the desired metal. Using this process, well-dispersed nanoparticles of Ru, Pt, Ni, and Co with a narrow size distribution were synthesized. The particles were stabilized by the presence of poly(vinylpyrrolidone) (PVP). On the basis of a similar process, Ould Ely et al. [209] synthesized nanoscale bimetallic Cox Pt1 − x particles, using Co(η 3–C8 H13 )(η 4–C8 H12 ) and Pt2 (dba)3 (dba = bis-dibenzylidene acetone) as organometallic compounds. They found that the alloy’s composition was determined by the initial ratio of the two organometallic precursors. Recently, the so-called polyol process [210] has been used successfully to process magnetic nanoparticles with a very narrow particle size distribution [211,212]. This process is based on the reduction of metallic salt in solution, at a high temperature (100 < T < 300◦ C), by the addition of a polyol (such as ethylene glycol), resulting in nanometric particles. In this process, surfactants such as oleic acid are used to control particle growth and stabilize the nanoparticles. Park and Cheon [213] discussed an interesting synthetization route to process solid solution and core-shell type cobalt-platinum nanoparticles via redox transmetallation reaction, reporting they had obtained nanoparticles of solid solution and core-shell structures smaller than 10 nm. These alloys were formed by redox transmetallation reactions between the reagents without the addition of reducing agents. The reaction between Co2 (CO)8 and Pt(hfac)2 (hfac = hexafluoroacetylacetonate) resulted in the formation of solid solution, while the reaction between Co nanoparticles and Pt(hfac)2 in solution resulted in “Co-core – Pt-shell” type nanoparticles. Narrow particle size distributions were achieved in both processes. The organometallic compounds of transition metals usually display low thermal stability, decomposing into their respective metals even under mild conditions. Owing to these properties, organometallic compounds can be considered good sources to process metal nanoparticles. Metal carbonyl pyrolysis has been used for the synthesis of several metal nanoparticles, although a broad particle size distribution is usually obtained [127, 214]. Park et al. [215] reported on the synthesis of iron nanorods and spherical nanoparticles using the thermal decomposition of Fe(CO)5 , in the presence of surfactant. They found that rod-like particles, with a higher aspect ratio, could be obtained by changing the concentration of didodecyldimethylammonium bromide (DDAB) during the reaction process. Puntes et al. [216] recently reported on the control of the size and shape of Co nanocrystals.
Assembly and Properties of Nanoparticles
59
A synthetization route, based on the principles applied to the synthesis and control of CdSe nanocrystals, was used [143]. These authors discussed the synthesis of Co nanoparticles with high crystallinity, narrow particle size distribution and a high degree of shape control. The nanocrystals are produced by injecting an organometallic precursor (Co2 (CO)8 ) into a hot (T ≈ 180◦ C) surfactant mixture (oleic acid and trioctylphosphine oxide (TOPO)) under an inert atmosphere. An interesting approach to synthesize metal alloy nanocrystals is the use of simultaneous salt reduction and thermal decomposition processes. Sun et al. [18] reported on the synthesis of iron–platinum (FePt) nanoparticles through the reduction of platinum acetylacetonate by a diol, and decomposition of iron pentacarbonyl (Fe(CO)5 ) in the presence of a surfactant mixture (oleic acid and oleyl amine). On the basis of a similar approach, Chen and Nikles [217] synthesized ternary alloy nanoparticles (Fex Coy Pt100−x−y ), using a simultaneous reduction of acetylacetonate and platinum acetylacetonate and thermal decomposition of Fe(CO)5 and obtaining an average particle diameter of 3.5 nm and narrow particle size distribution. The general process of metal nanocrystal synthesis can be divided, for didactic purposes, into five steps. The first step (step I) consists of the reduction of the metallic precursor (M+ X− ), which results in metal atoms (Mo ). These metallic atoms, ions, and metallic clusters will interact (step II), resulting in a metallic cluster growth process. Steps I and II are reversible. When the cluster grows to a critical size (step III), the process becomes irreversible (thermodynamic condition). Particle size can be controlled with the aid of stabilizers (step IV). The presence of only one stabilizer can result in a spherical particle. The origin of this morphology is thermodynamic. In fact, and as extensively discussed earlier, the cluster will grow in a geometrical arrangement to minimize the surface energy. The presence of two simultaneous stabilizers may give rise to a preferential growth process caused by the preferential adsorption of one of the stabilizers. This process, which leads to the formation of anisotropic particles such as nanorods, occurs under a kinetic condition. Particle agglomeration, basically, is prevented by steric stabilization under the influence of the molecules attached to the particles’ surface (step V). Step V is essential to control nanoparticle deposition. Thus, colloidal metal dispersion can be used as a building block to produce functional materials [218]. The nanocrystal self-assembly process requires a monodispersion system (particle size deviating by less than 10% from the average size) [219] and can be achieved by solvent evaporation [18, 217] or polymer-mediated nanocrystal assembly [220].
5.3 Metal Oxide Nanocrystals Metal oxides represent an important class of materials with a variety of technological applications. In general, transition metal oxides are vital for a series of technologies, such as solar cells and Li ion batteries. Several reports in the literature describe the effects of size on the various properties of this class of materials. Nanocrystalline metal oxide semiconductors such as TiO2 , SnO2 and ZnO, for example, display
60
C. Ribeiro and E.R. Leite
a quantum confinement effect, with enlargement of the band gap as the particle size decreases [73, 135, 221]. Colloidal nanocrystals with quantum size effects are promising building blocks for novel electrical and optoelectronic devices [2, 222]. Based on the above analysis, the development of metal oxides of nanometric dimensions can result in devices and materials with superior performance. However, these developments are directly related to the development of synthetic methods that allow for controlled particle size, particle morphology, and deposition. Once again, the bottom-up methods of wet chemical nanocrystal synthesis are apparently the most viable approach to achieve such control. Compared with the control attained in the synthesis of metal and II-IV semiconductor nanocrystals, the control of metal oxide nanocrystals is still incipient, particularly insofar as the synthesis of complex metal oxide nanocrystals (oxides formed of more than one cation) is concerned. The synthesis of metal oxide nanocrystals by wet chemical processes can be divided basically into two major groups: (a) chemical synthesis method based on the hydrolysis of metal alkoxides or metal halides; (b) chemical synthesis based on the nonhydrolytic method. Examples of these methods are described below. The chemical synthesis of metal oxide nanocrystals based on hydrolysis falls into two major groups: hydrolysis of metal alkoxides; hydrolysis of metal halides, and other inorganic salts. Metal alkoxide compounds are defined as compounds that have metal–oxygen–carbon bonds. Si(OC2 H5 )4 (tetraethyl orthosilicate or TEOS), for instance, is an alkoxide compound. This class of compound is highly reactive with water. Because the hydroxyl ion (OH− ) becomes bonded to the metal of the organic precursor, this reaction is called hydrolysis. Equation (50) shows a typical hydrolytic reaction of an alkoxide compound [100]: M − OR + H2 O → M − OH ↓ + ROH
(50)
where M represents Si, Ti, Zr, Al, and other metals, R is a ligand such as an alkyl group, and ROH is an alcohol. Hydrolytic reactions are strongly dependent on water content and catalysts. Because of the high reactivity of alkoxide compounds with water, hydrolytic reactions must be carried out in an atmosphere devoid of water vapor and the solvents used must have very low water content. A partially hydrolyzed metal alkoxide molecule can react with other partially hydrolyzed molecules by a polycondensation reaction, as described in (51) and (52): M − OH + M − OR → M − O − M + ROH M − OH + M − OH → M − O − M + ROH
(51) (52)
This type of reaction leads to the formation of an inorganic polymer or a threedimensional network formed of metal oxianions. The above-described process is called metal alkoxide-based sol–gel. The literature contains excellent reports providing in-depth analyses of this method [100, 223]. The sol–gel process allows for very good chemical homogeneity and offers the possibility of obtaining metastable phases, including the amorphous phase. This process normally promotes the formation of amorphous metal oxides, which require thermal or hydrothermal treatment to promote crystallization. Several factors affect the sol–gel process, including the kind
Assembly and Properties of Nanoparticles
61
of metal alkoxide, pH of the reaction solution, water/alkoxide ratio, temperature, nature of the solvent and stabilizers [100]. By varying these parameters, particles can be synthesized with controlled size, morphology, and agglomeration. When the metal alkoxide’s hydrolytic reaction rate is too fast, particle size and morphology are more difficult to control. A good alternative to overcome this problem is to use organic additives, which act as chelating ligands (carboxylic acids, β -diketones, and others) and decrease the precursor’s reactivity [224]. The sol–gel process can generally be divided into three steps: (1) precipitation of hydrous oxide particles, (2) control of hydrous oxide particle coagulation, and (3) crystallization of the hydrous oxide particle. Thus, the sol–gel process requires control of the particle size and morphology during the precipitation and coagulation steps and during the heat or hydrothermal treatment to promote crystallization. The precipitation of amorphous metal oxide (step 1) is well described by the LaMer and Dinegar theory [225]. Following this model, the supersaturation of hydrous oxides increases continuously (by a change in temperature or pH) until a critical concentration is reached. In this condition, nucleation occurs very rapidly and leads to precipitation. Then, the applicability of the nucleation theory discussed above, in this case, is only achieved by considering the as-mentioned monomer, i.e., the solvated metallic ion. Precipitation decreases the supersaturation to levels below the critical concentration, preventing further nucleation and precipitation. After nucleation occurs, the nuclei thus formed grow, reducing the concentration until an equilibrium concentration is achieved. The growth of particles may then occur especially by the Ostwald ripening mechanism (48). Controlled hydrolysis is one of the most popular methods for processing silica spheres in the range of 10–1,000 nm. The method was developed by St¨ober, Fink, and Bohn (SFB) [226–229] and is based on the hydrolysis of TEOS in a basic solution of water and alcohol. Particle size depends on the reactant concentration, i.e., the TEOS/alcohol ratio, water concentration, and pH (>7). This method has been extended to other metal oxide systems with similar success, particularly for TiO2 synthesis [85, 230]. The hydrous oxide particles precipitated by the hydrolysis of an alkoxide compound have the same tendency to agglomerate as that described for metal colloid systems. Different stabilizers can be used to stabilize these particles and prevent coagulation (step 2). These stabilizers control coagulation by electrostatic repulsion or by steric effects [44], similarly to the metal colloid systems. There is not only a similarity but also a fundamental difference between the approach used to control coagulation in the sol–gel process and that used for metal nanocrystal systems. As previously discussed, in metal oxide particles the surface charge is controlled by the protonation or deprotonation of their hydrous oxide surfaces (M-OH). Thus, the charge-determining ions are H+ and OH− . The ease with which protonation or deprotonation occurs will depend on the metal atoms and can be controlled by the pH. Electrostatic stabilization is most commonly employed in the water solution system, while steric stabilization can be more effective in organic media [231, 232]. A steric stabilizer can be used to control the condensation reaction during the precipitation of hydrous oxides. In this case, the stabilizer is added during the hydrolysis
62
C. Ribeiro and E.R. Leite
step [86, 87, 233, 234]. Peir´o and coworkers [235] recently reported on the synthesis of TiO2 anatase phase with a nanorod morphology (9 × 5 nm size) using controlled hydrolysis of tetraisopropyl orthotitanate (TIP) and tetrabutylammonium hydroxide ((TBA)OH) as a steric stabilizing agent. Finally, the crystallization process (step 3) can be considered as the critical step in the sol–gel process when a crystalline phase is desirable. If an amorphous phase is the final target, as in the case of SiO2 nanoparticle processing, the synthesis is complete in step 2. However, for crystalline materials, a heat or hydrothermal treatment is often necessary to promote the crystallization of the generally amorphous hydrous oxide which is formed during hydrolysis. Such subsequent treatments can lead to particle growth and modify the particles’ morphology. In the case of crystallization by heat treatment, the hydrous oxide colloidal suspension must be dry before the treatment. During the heat treatment, normally done in an electric furnace, crystallization occurs by a nucleation growth process into the generated nucleus and can be described by the discussed nucleation and growth theory [100, 236]. Since the amorphous phase crystallizes via the nucleation-growth process, particle size and growth can be controlled based on the separation of the nucleation phenomena from the growth process. However, during crystallization, each hydrous metal oxide particle can generate several nuclei, rendering it very difficult to control particle morphology and shape. The polynuclei process generates polycrystalline particles rather than freestanding ones. Controlling the generation of polynuclei in a single amorphous particle is the main challenge involved in obtaining crystalline metal oxide freestanding nanoparticles through the sol–gel process or by any other process that requires crystallization by heat treatment at high temperatures. The origin of the polynuclei process occurring during sol–gel amorphous precursor crystallization is assumed to be related to the preferential heterogeneous nucleation process (at the surface and interface nucleation) in detriment to homogeneous nucleation. The presence of hydroxyl groups and other defects on the particle surface can contribute to reduce the Gibbs free energy for crystallization, rendering the surface crystallization more favorable than the bulk crystallization. Since crystallization occurs in a scenario of high driving force (high temperature of heat treatment), surface crystallization must occur first, followed or not by bulk crystallization, giving rise to a particle with several nuclei. A possible way to avoid this problem is to suppress surface crystallization by using an inhibitory surface layer. If crystallization occurs at a temperature that favors bulk crystallization, a single nucleus can be generated, resulting in a freestanding particle. This approach was used recently to process freestanding lead zirconate titanate (PZT) nanoparticles. Liu and coworkers [237] used a sol–gel process based on controlled hydrolysis and a twostep heat treatment. They first applied a 12-h treatment in Ar atmosphere at 700◦ C, which formed a surface layer rich in carbonaceous materials on the nanoparticles, inhibiting surface nucleation. A second treatment was carried out at 500–600◦ C, in air, to burn out the carbon residue. Freestanding PZT nanoparticles with a mean particle size of 17 nm were reported. Freestanding particles are desirable in a variety of fundamental studies and in some technologies, particularly for ferroelectric metal oxides such as PbTiO3
Assembly and Properties of Nanoparticles
63
(PT), Pb(Zr,Ti)O3 (PZT), BaTiO3 (BT), among others. Freestanding and single crystallinenanorods of BT and SrTiO3 (ST) were recently obtained [238, 239]. The approach used in both these studies to obtain this type of material was the injection of a bimetallic alkoxide compound into a solvent at high temperature (100–280◦ C), in which the hydrolysis took place (injection-hydrolysis method). O’Brien et al. [238] synthesized BT nanoparticles with diameters ranging from 6–12 nm based on this approach, controlling the particle size by the ratio BaTi(OR)6 /oleic acid. Urban and coworkers [239] reported on the synthesis of BT and ST single crystalline nanorods using a similar process. The origin of nanorod morphology is not yet well understood. Nonetheless, the above-described approach appears to promote and control crystallization with no extra heat treatment, allowing for good control of particle size and morphology. Another alternative approach to avoid the heat treatment process is to promote crystallization under hydrothermal conditions, a process that is widely used in the synthesis of zeolites [240, 241]. In hydrothermal conditions, the solubility of the amorphous oxide particle is significantly enhanced, and the crystallization may occur concurrently to growth processes, i.e., redissolution and reprecipitation of the particles – but in crystalline nuclei. Ying and Wang [242] used hydrothermal treatment to promote the crystallization of anatase and rutile phases, using an alkoxide sol–gel route and achieving the crystallization of anatase TiO2 phase with a mean particle size of 10 nm at 180◦ C, as well as the synthesis of ultra fine rutile TiO2 phase obtained by hydrothermal treatment in an acidic medium. The hydrolysis of metal halides and other inorganic salts is a method widely employed to process metal oxide nanoparticles, such as TiO2 [90, 243], doped and undoped SnO2 [244–248], ZnO temeulenkamp98, meulenkamp981 , wong98, ZrO2 [245, 250], Y2 O3 [251], and others. This process is less sensitive to water content, requiring less control than the hydrolysis of metal alkoxide. In fact, the hydrolytic process normally occurs in a water solution. In solution, the metallic salt generates n+ the anion (Cl− , F− , NO− 3 , and others) and the cation (M ). The cation is normally hydrolyzed by pH changing. Hydrolysis promotes the precipitation of an insoluble amorphous hydrous metal oxide. Thus, the steps used to describe the metal alkoxide hydrolysis-based sol–gel process can also be used to describe the sol–gel process based on inorganic salts. The synthesis based on this approach requires the same control described earlier for the sol–gel method related to the hydrolysis of metal alkoxide. However, control of the atmosphere and water content in the solvents is much less demanding. The crystallinity of the formed particle is, in any case, determined by thermodynamic and kinetic parameters. Leite and coworkers [252,253] recently demonstrated that well-crystallized SnO2 nanocrystals could be produced at room temperature with no hydrothermal treatment. This process is based on the hydrolysis of SnCl2 in an ethanol solution, followed by dialysis to remove the Cl− ions. The result of this dialysis is a transparent colloidal suspension formed by near-spheric particles, as illustrated in Fig. 9 later. Zinc Oxide (ZnO) nanocrystals have also been synthesized at room temperature. The process developed by Bahnemann et al. [67] consists of hydrolyzing zinc acetate dihydrate dissolved in 2-propanol by the addition of NaOH
64
C. Ribeiro and E.R. Leite
Fig. 9 Tin dioxide (SnO2 ) particles synthesized by hydrolysis of SnCl2 at room temperature. The final particles (after elimination of residual chloride by dialysis) are near-spherical nanocrystals
in a 2-propanol solution. A colloidal suspension of crystalline ZnO nanoparticles is obtained without hydrothermal treatment. Similar results were obtained by Spanhel and Anderson [254] and by Meulenkamp emeulenkamp98, meulenkamp981; however, they dissolved the zinc acetate dihydrate (Zn(Ac)2 · xH2 O) in ethanol and used LiOH to promote the Zn+2 hydrolysis. Particles in the range of 3–6 nm were reportedly obtained by both these processes. However, the most common product of synthesis is amorphous, like in metal alkoxide hydrolysis and, again, the major problem of the metal salts hydrolysis approach is the crystallization step. An adequate route to obtain good crystallinity at low temperatures with minimum particle growth is the hydrothermal treatment. N¨utz and Haase [244] synthesized well-crystallized Sb-doped SnO2 nanocrystals, with particles in the range of 4–9 nm, using a hydrothermal treatment of colloidal gel. The gel was treated in an autoclave at temperatures in excess of 250◦ C. The authors used a solution of SnCl4 and SbCl3 or SbCl5 in fuming HCl as precursors and promoted hydrolysis by increasing the pH (using aqueous ammonium). Goebbert et al. [247] also reported on the synthesis of well-crystallized Sb-doped SnO2 , using the hydrothermal process. However, they used a solution of SnCl4 and SbCl3 or SbCl5 in ethanol, promoting hydrolysis by raising the pH (using aqueous ammonium). The hydrothermal treatment was carried out at 150◦ C using 10 bar of pressure. This synthesization route produced nanocrystals in the range of 5 nm.
Assembly and Properties of Nanoparticles
65
Once again, control of growth after nucleation is necessary to obtain desirable nanoparticles. Rusakova et al. [255] used an interesting approach to control the particle growth of hydrous metal oxide gels. They showed that the growth could be inhibited by replacing the surface hydroxyl group, before the crystallization step, with a functional group that does not condense and that can produce small secondaryphase particles, which restrict boundary mobility at high temperatures. These authors reported that fully crystalline SnO2 , TiO2 , and ZrO2 nanocrystals (ranging in size from 1.5 to 5 nm) can be obtained after heat treating the precipitate gel at 500◦ C, by replacing the hydroxyl group with the methyl siloxyl group before firing. The development of metal oxide nanocrystals by nonhydrolytic synthesization routes results in materials whose surfaces are free of OH− groups and produces nanocrystals with different properties particularly suitable for catalytic and sensor applications. Several nonhydrolytic processes have been developed to process metal oxides, and the molecular chemistry of these various methods is discussed by Vioux [256]. On the basis of the strategy used to process II-IV semiconductor nanocrystals, using the rapid decomposition of molecular precursor in the presence of strong coordinating agents, Trentler and coworkers [88] proposed an interesting route to process TiO2 nanocrystals, based on the following reactions: TiX4 + Ti(OR)4 → 2TiO2 + RX
(53)
TiX4 + 2ROR → TiO2 + 4RX
(54)
where X is a halide ion (Cl− , F− , Br− , I− ) and R an alkyl group. The synthetic route involved injecting the metal alkoxide (Ti(OR)4 ) into a titanium halide mixed with trioctylphosphine oxide (TOPO) and a solvent at high temperature (300◦ C). Nanoparticles with a mean particle size of 7.3 nm and anatase phase were obtained. Alivisatos and collaborators [257] demonstrated that transition metal oxide nanocrystals (γ -Fe2 O3 , Mn3 O4 , Cu2 O) could be prepared using a nonhydrolytic process based on the thermal decomposition of metal Cupferron complexes Mx Cupx (M = metal ion, Cup = C6 H5 N(NO)O− ) in a hot solvent with surfactant. Their results suggest that a good level of control can be achieved when this approach is used to process metal oxide nanoparticles. Camargo et al. [258–261] recently developed a new route to synthesize leadbased perovskite nanoparticles, such as PT [260], PZT [259], PbZrO3 (PZ) [258], and PbHfO3 (PH) [261]. This method, which apparently involves no hydrolytic reaction and is carbon and halide-free, is called the oxidant peroxo method (OPM) because it is based on the oxidation–reduction reaction between Pb(II) ion and water-soluble metal-peroxide complexes with high pH. This process results in an inorganic amorphous precursor that requires subsequent thermal treatment to promote crystallization of the desired phase. The low crystallization temperatures (400–450◦ C for the PT phase) of the amorphous precursor suggest that the OPM method favors the formation of a homogeneous inorganic compound. An important nonhydrolytic chemical process is the so-called Pechini process or in situ polymerizable complex (IPC) [262]. This process is based on the ability of polycarboxylic acids, particularly citric acid (CA), to form very stable water-soluble
66
C. Ribeiro and E.R. Leite
chelate complexes. Even cations with a high tendency to become hydrolyzed, such as Ti+4 and Nb+5 , can be chelated by CA in a water solution, preventing the hydrolysis and precipitation of hydrous metal oxide. The CA complex thus formed can be immobilized in a solid organic resin through a polyesterification reaction with ethylene glycol (EG). This process leads to the formation of a polymeric precursor with the cations of interest randomly distributed in a three-dimensional solid lattice, avoiding precipitation or phase segregation during the synthesis of the metal oxide compound [263]. This method is widely used to process titanates [264–268], niobates [269–271] and other kinds of polycationic or single cationic metal oxides [272, 273]. In the last five years, this method has also proved suitable to process oxide thin films with superior performance [273–277]. Using this process, PbTiO3 thin film [277] and nanometric powder [278], for example, can be synthesized at temperatures as low as 450◦ C, resulting in a metastable cubic PbTiO3 phase. Crystallization was observed at a temperature at which long-range diffusion had to be constrained, and the thermodynamic equilibrium configuration was kinetically suppressed [278]. The ability to form complex metal oxides at low crystallization temperatures and metastable phases is not yet well understood, but it is generally assumed to be associated with the tendency of a poly-cationic CA complex to develop during the chelation step in water solution [279], and/or the tendency to form an inorganic amorphous phase, with a local symmetry close to that of the crystalline phase, during the crystallization step [280]. The major problem with this process is maintaining control over the particle size and morphology. During the crystallization process, it is very difficult to keep the nucleation and the growth processes separate, resulting in agglomerates made up of nanocrystals. The particle growth process, which was studied in the final stage of the crystallization of nanometric powder processed by the IPC method, showed that growth occurs in two different stages [281]. At heat treatment temperatures of <800◦ C, the growth process is associated with the surface diffusion mechanism, with an activation energy in the range of 40–80 kJ mol−1 . At a temperature of > 800◦ C, particle growth is controlled by densification of the agglomerate formed by nanometric particles and by the neck-size-controlled growth mechanism [282]. Basically, two methodologies have been used to control the particle size of metal oxides processed by the IPC method. Quinelato et al. [272] demonstrated that the particle size and morphology of CeO2 -doped ZrO2 could be controlled by controlling the metal/CA ratio. A high concentration of CA leads to smaller particles with a soft agglomeration. Leite and collaborators [283, 284] showed that the particle size and morphology of SnO2 could be controlled by the addition of dopants such as Nb2 O5 and rare earths. The same authors [284] also showed that doped SnO2 nanocrystals are highly stable against particle growth, even at high temperatures. The technique used to achieve this high stability was to process supersaturated solid solution between the SnO2 and the dopant. Segregation of the dopant on the nanocrystal surface occurs during the heat treatment, decreasing the particle boundary mobility or the surface energy. This approach was originally developed to control the particle growth of metal nanocrystals [5, 285] and was used successfully to control the growth of metal oxide nanocrystals.
Assembly and Properties of Nanoparticles
67
6 Summary As one can see, several properties can be explored on a nanoscale and an introductory view of the subject was discussed here. Advances in understanding nanoparticle formation mechanisms and the nature of nanoparticle properties undoubtedly offer the best pathway for developing viable nanotechnology and for augmenting the benefits of its use. Acknowledgments The authors gratefully acknowledge the financial support of the Brazilian research funding agencies FAPESP and CNPq.
References 1. L. V. Interrante and M. J. Hampden-Smith. Chemistry of Advanced Materials. Wiley, New York, NY, 1998 2. A. P. Alivisatos. Perspectives on the physical chemistry of semiconductor nanocrystals. J. Phys. Chem., 100:13226–13239, 1996 3. S. Morup. Nanomagnetism, chapter Studies of Superparamagnetism in Samples of Ultrafine Particles, pages 93–99. Kluwer, Boston, MA, 1993 4. K. O’Grady and R. W. Chantrell. Magnetic Properties of Fine Particles, chapter Magnetic Properties: Theory and Experiments. Elsevier, Amsterdan, 1992 5. H. Gleiter. Nanostructured materials: Basic concepts and microstructure. Acta Materialia, 48:1–29, 2000 6. M. Gratzel. Photoelectrochemical cells. Nature, 414:338–344, 2001 7. P. Mulvaney. Not all that’s gold does glitter. MRS Bull., 26:1009–1014, 2001 8. M. Faraday. The bakerian lecture: Experimental relations of gold (and other metals) to light. Philos. Trans. R. Soc., 147:145–181, 1857 9. B. Oregan and M. Gratzel. A low-cost, high-efficiency solar-cell based on dye-sensitized colloidal TiO2 films. Nature, 353:737–740, 1991 10. W. J. Li, H. Osora, L. Otero, D. C. Duncan, and M. A. Fox. Photoelectrochemistry of a substituted-Ru(bpy)(3)(2+)-labeled polyimide and nanocrystalline SnO2 composite formulated. J. Phys. Chem. A, 102:5333–5340, 1998 11. I. Bedja P. V., Kamat X., Hua A., Lappin G., and Hotchandani S. Photosensitization of nanocrystalline ZnO films by bis(2, 2 -bipyridine)(2, 2 -bipyridine-4,4 -dicarboxylic acid)ruthenium(ii). Langmuir, 13:2398–2403, 1997 12. L. Kavan, K. Kratochvilova, and M. Gratzel. Study of nanocrystalline TiO2 (anatase) electrode in the accumulation regime. J. Electroanal. Chem., 394:93–102, 1995 13. F. Croce, G. B. Appetecchi, L. Persi, and B. Scrosati. Nanocomposite polymer electrolytes for lithium batteries. Nature, 394:456–458, 1998 14. U. Bach, D. Lupo, P. Comte, J. E. Moser, F. Weissortel, J. Salbeck, H. Spreitzer, and M. Gratzel. Solid-state dye-sensitized mesoporous TiO2 solar cells with high photon-toelectron conversion efficiencies. Nature, 395:583–585, 1998 15. A. Hagfeldt and M. Gratzel. Light-induced redox reactions in nanocrystalline systems. Chem. Rev., 95:49–68, 1995 16. N. Yamazoe. New approaches for improving semiconductor gas sensors. Sens. Actuators B-Chem., 5:7–19, 1991 17. D. Weller and A. Moser. Thermal effect limits in ultrahigh-density magnetic recording. IEEE Trans. Magn., 35:4423–4439, 1999
68
C. Ribeiro and E.R. Leite
18. S. H. Sun, C. B. Murray, D. Weller, L. Folks, and A. Moser. Monodisperse FePt nanoparticles and ferromagnetic FePt nanocrystal superlattices. Science, 287:1989–1992, 2000 19. J. B. Dai, J. K. Tang, S. T. Hsu, and W. Pan. Magnetic nanostructures and materials in magnetic random access memory. J. Nanosci. Nanotechnol., 2:281–291, 2002 20. W. Chen, D. Grouquist, and J. Roark. Voltage tunable electroluminescence of CdTe nanoparticle light-emitting diodes. J. Nanosci. Nanotechnol., 2:47–53, 2002 21. V. L. Colvin, M. C. Schlamp, and A. P. Alivisatos. Light-emitting-diodes made from cadmium selenide nanocrystals and a semiconducting polymer. Nature, 370:354–357, 1994 22. C. Feldmann. Preparation of nanoscale pigment particles. Adv. Mater., 13:1301–1303, 2001 23. Y. M. Chiang, D. P. Birnie III, and W. D. Kingery. Physical Ceramics. Wiley, New York, NY, 1997 24. B. Gilbert, F. Huang, H. Z. Zhang, G. A. Waychunas, and J. F. Banfield. Nanoparticles: Strained and stiff. Science, 305:651–654, 2004 25. K. K. Nanda, S. N. Sahu, and S. N. Behera. Liquid-drop model for the size-dependent melting of low-dimensional systems. Phys. Rev. A, 66:013208–1–8, 2002 26. C. J. Coombes. The melting of small particles of lead and indium. J. Phys. F: Metal. Phys., 2:441–449, 1972 27. P. Buffat and J. P. Borel. Size effect on melting temperature of gold particles. Phys. Rev. A, 13:2287–2298, 1976 28. T. Castro, R. Reifenberger, E. Choi, and R. P. Andres. Size-dependent melting temperature of individual nanometer-sized metallic clusters. Phys. Rev. B, 42:8548–8556, 1990 29. C. L. Cleveland and U. Landman. The energetics and structure of nickel clusters – size dependence. J. Chem. Phys., 94:7376–7396, 1991 30. F. Ercolessi, W. Andreoni, and E. Tosatti. Melting of small gold particles – mechanism and size effects. Phys. Rev. Lett., 66:911–914, 1991 31. A. N. Goldstein, C. M. Echer, and A. P. Alivisatos. Melting in semiconductor nanocrystals. Science, 256:1425–1427, 1992 32. T. P. Martin, U. Naher, H. Schaber, and U. Zimmermann. Evidence for a size-dependent melting of sodium clusters. J. Chem. Phys., 100:2322–2324, 1994 33. J. B. Mitchel and J. T Schwartz. Preparation of Catalysts IV: Scientific Bases for the Preparation of Heterogeneous Catalysts (Studies in Surface Science and Catalysis), volume 31, chapter Catalyst preparation science. Elsevier, Amsterdan, 1987 34. J. Turkevich and G. Kim. Palladium – preparation and catalytic properties of particles of uniform size. Science, 169:873, 1970 35. H. Hirai, Y. Nakao, and N. Toshima. Colloidal rhodium in polyvinyl-alcohol as hydrogenation catalyst of olefins. Chem. Lett., 1976:905–910, 1976 36. D. N. Furlong, A. Launikonis, W. H. F. Sasse, and J. V. Sanders. Colloidal platinum sols – preparation, characterization and stability towards salt. J. Chem. Soc.-Farad. Trans. I, 80:571, 1984 37. T. Teranishi and M. Miyake. Size control of palladium nanoparticles and their crystal structures. Chem. Mater., 10:594–600, 1998 38. R. Narayanan and M. A. El-Sayed. Catalysis with transition metal nanoparticles in colloidal solution: Nanoparticle shape dependence and stability. J. Phys. Chem. B, 109:12663–12676, 2005 39. C. Burda, X. B. Chen, R. Narayanan, and M. A. El-Sayed. Chemistry and properties of nanocrystals of different shapes. Chem. Rev., 105:1025–1102, 2005 40. R. Narayanan and M. A. El-Sayed. Shape-dependent catalytic activity of platinum nanoparticles in colloidal solution. Nano Lett., 4:1343–1348, 2004 41. T. S. Ahmadi, Z. L. Wang, T. C. Green, A. Henglein, and M. A. ElSayed. Shape-controlled synthesis of colloidal platinum nanoparticles. Science, 272:1924–1926, 1996 42. J. S. Bradley. Clusters and Colloids: From Theory to Applications, chapter The Chemistry of Transition Metal Colloids, pages 459–544. VCH, Weinheim, 1994 43. E. R. Leite. Encyclopedia of Nanoscience and Nanotechnology, chapter Nanocrystals assembled from bottom-up, pages 537–550. American Scientific Publishers, 2004
Assembly and Properties of Nanoparticles
69
44. R. J. Pugh. Surface and Colloid Chemistry in Advanced Ceramics Processing, chapter Dispersion and Stability of Ceramic Powders in Liquids, pages 127–192. Marcel Dekker, NY, New York, 1994 45. G. A. Parks. Isoelectric points of solid oxides solid hydroxides and aqueous hydroxo complex systems. Chem. Rev., 65:177, 1965 46. Y. Yin and A. P. Alivisatos. Colloidal nanocrystal synthesis and the organic-inorganic interface. Nature, 437:664–670, 2005 47. X. Wang, J. Zhuang, Q. Peng, and Y. Li. A general strategy for nanocrystal synthesis. Nature, 473:121–124, 2005 48. Z. Y. Tang, N. A. Kotov, and M. Giersig. Spontaneous organization of single CdTe nanoparticles into luminescent nanowires. Science, 297:237–240, 2002 49. Y. Volkov, S. Mitchell, N. Gaponik, Y. P. Rakovich, J. F. Donegan, D. Kelleher, and A. L. Rogach. In-situ observation of nanowire growth from luminescent cdte nanocrystal in a phosphate buffer solution. Chem. Phys. Chem., 5:1600–1602, 2004 50. K. S. Cho, D. V. Talapin, W. Gaschler, and C. B. Murray. Designing PbSe nanowires and nanorings through oriented attachment of nanoparticles. J. Am. Chem. Soc., 127:7140–7147, 2005 51. N. J. Wagner and R. Klein. The rheology and microstructure of charged colloidal suspensions. Colloid Polym. Sci., 269:295–319, 1991 52. J. N´emeth and I. D´ek´any. The effect of nanoparticle growth on rheological properties of silica and silicate dispersions. Colloid Polym Sci., 278:211–219, 2000 53. V. Tohver, A. Chan, O. Sakurada, and J. A. Lewis. Nanoparticle engineering of complex fluid behavior. Langmuir, 17:8414–8421, 2001 54. V. Tohver, J. E. Smay, A. Braem, P. V. Braun, and J. A. Lewis. Nanoparticle halos: A new colloid stabilization mechanism. Proc. Natl Acad. Sci. U S A., 98:8950–8954, 2001 55. I. N. Levine. Quantum Chem. Prentice Hall, 5th edition, 1999 56. S. Folsch, P. Hyldgaard, R. Koch, and K. H. Ploog. Quantum confinement in monatomic Cu chains on cu(111). Phys. Rev. Lett., 92:056803–1–4, 2004 57. N. Nilius, T. M. Wallis, and W. Ho. Realization of a particle-in-a-box: Electron in an atomic pd chain. J. Phys. Chem. B, 109:20657–20660, 2005 58. W. P. Halperin. Quantum size effects in metal particles. Rev. Mod. Phys., 58:533–606, 1986 59. A. Kawabata and R. Kubo. Electronic properties of fine metallic particles.2. plasma resonance absorption. J. Phys. Soc. Jpn., 21:1765, 1966 60. R. Kubo, A. Kawabata, and S. Kobayashi. Electronic-properties of small particles. Ann. Rev. Mater. Sci., 14:49–66, 1984 61. L. E. Brus. A simple-model for the ionization-potential, electron-affinity, and aqueous redox potentials of small semiconductor crystallites. J. Chem. Phys., 79:5566–5571, 1983 62. L. E. Brus. Electron electron and electron-hole interactions in small semiconductor crystallites – the size dependence of the lowest excited electronic state. J. Chem. Phys., 80:4403– 4409, 1984 63. L. Brus. Electronic wave-functions in semiconductor clusters – experiment and theory. J. Phys. Chem., 90:2555–2560, 1986 64. S. V. Gaponenko. Optical Properties of Semiconductor Nanocrystals. Cambridge University Press, Cambridge, 1998 65. R. Rossetti, S. Nakahara, and L. E. Brus. Quantum size effects in the redox potentials, resonance Raman-spectra, and electronic-spectra of cds crystallites in aqueous-solution. J. Chem. Phys., 79:1086–1088, 1983 66. R. Rossetti, J. L. Ellison, J. M. Gibson, and L. E. Brus. Size effects in the excited electronic states of small colloidal cds crystallites. J. Chem. Phys., 80:4464–4469, 1984 67. D. W. Bahnemann, C. Kormann, and M. R. Hoffmann. Preparation and characterization of quantum size zinc-oxide – a detailed spectroscopic study. J. Phys. Chem., 91:3789–3798, 1987 68. A. P. Alivisatos, A. L. Harris, N. J. Levinos, M. L. Steigerwald, and L. E. Brus. Electronic states of semiconductor clusters – homogeneous and inhomogeneous broadening of the optical-spectrum. J. Chem. Phys., 89:4001–4011, 1988
70
C. Ribeiro and E.R. Leite
69. C. B. Murray, D. J. Norris, and M. G. Bawendi. Synthesis and characterization of nearly monodisperse cde (e = s, se, te) semiconductor nanocrystallites. J. Am. Chem. Soc., 115:8706–8715, 1993 70. X. G. Peng, J. Wickham, and A. P. Alivisatos. Kinetics of II–VI and III–V colloidal semiconductor nanocrystal growth: Focusing of size distributions. J. Am. Chem. Soc., 120:5343– 5344, 1998 71. G. Oskam, Z. S. Hu, R. L. Penn, N. Pesika, and P. C. Searson. Coarsening of metal oxide nanoparticles. Phys. Rev. E, 66:011403–1–4, 2002 72. N. S. Pesika, Z. S. Hu, K. J. Stebe, and P. C. Searson. Quenching of growth of ZnO nanoparticles by adsorption of octanethiol. J. Phys. Chem. B, 106:6985–6990, 2002 73. N. Chiodini, A. Paleari, D. DiMartino, and G. Spinolo. SNO2 nanocrystals in SiO2: A wideband-gap quantum-dot system. Appl. Phys. Lett., 81:1702–1704, 2002 74. Z. S. Hu, G. Oskam, R. L. Penn, N. Pesika, and P. C. Searson. The influence of anion on the coarsening kinetics of ZnO nanoparticles. J. Phys. Chem. B, 107:3124–3130, 2003 75. Z. S. Hu, G. Oskam, and P. C. Searson. Influence of solvent on the growth of ZnO nanoparticles. J. Colloid Interface Sci., 263:454–460, 2003 76. G. Oskam, A. Nellore, R. L. Penn, and P. C. Searson. The growth kinetics of TiO2 nanoparticles from titanium(IV) alkoxide at high water/titanium ratio. J. Phys. Chem. B, 107: 1734–1738, 2003 77. N. S. Pesika, K. J. Stebe, and P. C. Searson. Determination of the particle size distribution of quantum nanocrystals from absorbance spectra. Adv. Mater., 15:1289, 2003 78. N. S. Pesika, K. J. Stebe, and P. C. Searson. Relationship between absorbance spectra and particle size distributions for quantum-sized nanocrystals. J. Phys. Chem. B, 107:10412– 10415, 2003 79. E. J. H. Lee, C. Ribeiro, T. R. Giraldi, E. Longo, E. R. Leite, and J. A. Varela. Photoluminescence in quantum-confined SnO2 nanocrystals: Evidence of free exciton decay. Appl. Phys. Lett., 84:1745–1747, 2004 80. W. E. Buhro and V. L. Colvin. Semiconductor nanocrystals – Shape matters. Nat. Mater., 2:138–139, 2003 81. A. A. Kokhanovsky and E. P. Zege. Optical properties of aerosol particles: A review of approximate analytical solutions. J. Aerosol Sci., 28:1–21, 1997 82. G. Blasse and B. C. Grabmaier. Luminescent Materials. Springer, Berlin, 1 edition, 1994 83. C. Ribeiro, E. J. H. Lee, T. R. Giraldi, E. Longo, and E. R. Leite. Internal report, Federal University of Sao Carlos, unpublished work, 2003 84. A. Navrotsky and O. J. Kleppa. Enthalpy of anatase-rutile transformation. J. Am. Ceramic Soc., 50:626, 1967 85. E. A. Barringer and H. K. Bowen. High-purity, monodisperse TiO2 powders by hydrolysis of titanium tetraethoxide.1. synthesis and physical-properties. Langmuir, 1:414–420, 1985 86. J. H. Jean and T. A. Ring. Nucleation and growth of monosized TiO2 powders from alcohol solution. Langmuir, 2:251–255, 1986 87. T. E. Mates and T. A. Ring. Steric stability of alkoxy-precipitated TiO2 in alcohol-solutions. Colloids Surf., 24:299–313, 1987 88. T. J. Trentler, T. E. Denler, J. F. Bertone, A. Agrawal, and V. L. Colvin. Synthesis of TiO2 nanocrystals by nonhydrolytic solution-based reactions. J. Am. Chem. Soc., 121:1613–1614, 1999 89. G. Garnweitner, M. Antonietti, and M. Niederberger. Nonaqueous synthesis of crystalline anatase nanoparticles in simple ketones and aldehydes as oxygen-supplying agents. Chem. Comm., 3:397–399, 2005 90. J. Ragai and W. Lotfi. Effect of preparative ph and aging media on the crystallographic transformation of amorphous TiO2 to anatase and rutile. Colloids Surf., 61:97–109, 1991 91. S. Han, S. H. Choi, S. S. Kim, M. Cho, B. Jang, D. Y. Kim, J. Yoon, and T. Hyeon. Lowtemperature synthesis of highly crystalline TiO2 nanocrystals and their application to photocatalysis. Small, 1:812–816, 2005 92. H. Z. Zhang and J. F. Banfield. Kinetics of crystallization and crystal growth of nanocrystalline anatase in nanometer-sized amorphous titania. Chem. Mater., 14:4145–4154, 2002
Assembly and Properties of Nanoparticles
71
93. M. R. Ranade, A. Navrotsky, H. Z. Zhang, J. F. Banfield, S. H. Elder, A. Zaban, P. H. Borse, S. K. Kulkarni, G. S. Doran, and H. J. Whitfield. Energetics of nanocrystalline TiO2 . Proc. Natl Acad. Sci. U S A, 99:6476–6481, 2002 94. A. Navrotsky. Energetic clues to pathways to biomineralization: Precursors, clusters, and nanoparticles. Proc. Natl Acad. Sci. U S A, 101:12096–12101, 2004 95. A. S. Barnard and P. Zapol. Predicting the energetics, phase stability, and morphology evolution of faceted and spherical anatase nanocrystals. J. Phys. Chem. B, 108:18435–18440, 2004 96. A. S. Barnard and P. Zapol. Effects of particle morphology and surface hydrogenation on the phase stability of TiO2 . Phys. Rev. B, 70:235403–1–13, 2004 97. A. Paul. Chemistry of Glasses. Chapman and Hall, London, 1982 98. B. L. Cushing, V. L. Kolesnichenko, and C. J. OConnor. Recent advances in the liquid-phase syntheses of inorganic nanoparticles. Chem. Rev., 104:3893–3946, 2004 99. S. V. Ushakov and A. Navrotsky. Direct measurements of water adsorption enthalpy on hafnia and zirconia. App. Phys. Lett., 87:164103, 2005 100. C. J. Brinker and G. W. Scherrer. Sol–Gel Science. Academic, Boston, MA, 1990 101. D. V. Talapin, A. L. Rogach, M. Haase, and H. Weller. Evolution of an ensemble of nanoparticles in a colloidal solution: Theoretical study. J. Phys. Chem. B, 105:12278–12285, 2001 102. H. Z. Zhang, F. Huang, B. Gilbert, and J. F. Banfield. Molecular dynamics simulations, thermodynamic analysis, and experimental study of phase stability of zinc sulfide nanoparticles. J. Phys. Chem. B, 107:13051–13060, 2003 103. H. Z. Zhang and J. F. Banfield. Aggregation, coarsening, and phase transformation in zns nanoparticles studied by molecular dynamics simulations. Nano Lett., 4:713–718, 2004 104. F. Huang, B. Gilbert, H. H. Zhang, and J. F. Banfield. Reversible, surface-controlled structure transformation in nanoparticles induced by an aggregation state. Phys. Rev. Lett., 92:15550– 1–4, 2004 105. F. Huang, B. Gilbert, H. Zhang, M. P. Finnegan, J. R. Rustad, C. S. Kim, G. A. Waychunas, and J. F. Banfield. Interface interactions in nanoparticle aggregates. Geochim. Cosmochim. Acta, 68:A222–A222, 2004 106. H. Z. Zhang and J. F. Banfield. Size dependence of the kinetic rate constant for phase transformation in TiO2 nanoparticles. Chem. Mater., 17:3421–3425, 2005 107. F. Huang and J. F. Banfield. Size-dependent phase transformation kinetics in nanocrystalline zns. J. Am. Chem. Soc., 127:4523–4529, 2005 108. S. Toschev. Crystal Growth – an introduction, chapter Homogeneous nucleation, pages 1–49. Elsevier, Amsterdam 1973 109. A. S. Barnard and P. Zapol. A model for the phase stability of arbitrary nanoparticles as a function of size and shape. J. Chem. Phys., 121:4276–4283, 2004 110. S. H. Tolbert and A. P. Alivisatos. Size dependence of a first-order solid-solid phasetransition – the wurtzite to rock-salt transformation in CdSe nanocrystals. Science, 265: 373–376, 1994 111. S. H. Tolbert and A. P. Alivisatos. The wurtzite to rock-salt structural transformation in CdSe nanocrystals under high-pressure. J. Chem. Phys., 102:4642–4656, 1995 112. C. Herring. Some theorems on the free energies of crystal surfaces. Phys. Rev., 82:87–93, 1951 113. A. Beltran, J. Andres, E. Longo, and E. R. Leite. Thermodynamic argument about SnO2 nanoribbon growth. Appl. Phys. Lett., 83:635–637, 2003 114. J. Oviedo and M. J. Gillan. Energetics and structure of stoichiometric SnO2 surfaces studied by first-principles calculations. Surf. Sci., 463:93–101, 2000 115. P. A. Mulheran and J. H. Harding. The stability of SnO2 surfaces. Model. Simul. Mater. Sci. Eng., 1:39–43, 1992 116. B. Slater, C. R. A. Catlow, D. H. Gay, D. E. Williams, and V. Dusastre. Study of surface segregation of antimony on SnO2 surfaces by computer simulation techniques. J. Phys. Chem. B, 103:10644–10650, 1999
72
C. Ribeiro and E.R. Leite
117. M. J. Yacaman, J. A. Ascencio, H. B. Liu, and J. Gardea-Torresdey. Structure shape and stability of nanometric sized particles. J. Vac. Sci. Technol. B-an Int. J. Devoted to Microelectron. Nanometer Struct.-Process Meas. Phenomena, 19:1091–1103, 2001 118. B. Gilbert, H. Z. Zhang, F. Huang, M. P. Finnegan, G. A. Waychunas, and J. F. Banfield. Special phase transformation and crystal growth pathways observed in nanoparticles. Geochem. Trans., 4:20–27, 2003 119. B. Gilbert, H. Z. Zhang, F. Huang, J. F. Banfield, Y. Ren, D. Haskel, J. C. Lang, G. Srajer, A. Jurgensen, and G. A. Waychunas. Analysis and simulation of the structure of nanoparticles that undergo a surface-driven structural transformation. J. Chem. Phys., 120:11785–11795, 2004 120. H. Z. Zhang, B. Gilbert, F. Huang, and J. F. Banfield. Water-driven structure transformation in nanoparticles at room temperature. Nature, 424:1025–1029, 2003 121. A. S. Barnard, P. Zapol, and L. A. Curtiss. Modeling the morphology and phase stability of TiO2 nanocrystals in water. J. Chem. Theory Comput., 1:107–116, 2005 122. P. P. von Weimarn. The precipitation laws. Chem. Rev., 2:217–242, 1925 123. M. Zurita-Gotor and D. E. Rosner. Aggregate size distribution evolution for brownian coagulation – sensitivity to an improved rate constant. J. Colloid Interface Sci., 274:502–514, 2004 124. B. Mutaftschiev. Handbook of Crystal Growth, chapter Nucleation, page 187. Elsevier Science, Amsterdam, 1993 125. B. K. Chakraverty. Crystal Growth – An Introduction, chapter Heterogeneous nucleation and condensation on substrates, pages 50–104. Elsevier, Amsterdam, 1973 126. G. H. Weiss. Overview of theoretical models for reaction rates. J. Stat. Phys., 42:3–36, 1986 127. D. P. Dinega and M. G. Bawendi. A solution-phase chemical approach to a new crystal structure of cobalt. Angewandte Chemie-international Edition, 38:1788–1791, 1999 128. P. Jensen. Growth of nanostructures by cluster deposition: Experiments and simple models. Rev. Mod. Phys., 71:1695–1735, 1999 129. M. Aoun, E. Plasari, R. David, and J. Villermaux. A simultaneous determination of nucleation and growth rates from batch spontaneous precipitation. Chem. Eng. Sci., 54:1161–1180, 1999 130. R. Zauner and A. G. Jones. Determination of nucleation, growth, agglomeration and disruption kinetics from experimental precipitation data: the calcium oxalate system. Chem. Eng. Sci., 55:4219–4232, 2000 131. S. A. Kukushkin and S. V. Nemna. The effect of pH on nucleation kinetics in solutions. Doklady Phys. Chem., 377(6):792–796, 2000 132. E. A. Meulenkamp. Size dependence of the dissolution of ZnO nanoparticles. J. Phys. Chem. B, 102:7764–7769, 1998 133. G. W. Greenwood. The growth of dispersed precipitates in solutions. Acta Metallurgica, 4:243–248, 1956 134. S. A. Kukushkin and A. V. Osipov. Crystallization of binary melts and decay of supersaturated solid solutions at the ostwald ripening stage under non-isothermal conditions. J. Phys. Chem. Solids, 56:1259–1269, 1995 135. E. M. Wong, J. E. Bonevich, and P. C. Searson. Growth kinetics of nanocrystalline ZnO particles from colloidal suspensions. J. Phys. Chem. B, 102:7770–7775, 1998 136. E. M. Wong, P. G. Hoertz, C. J. Liang, B. M. Shi, G. J. Meyer, and P. C. Searson. Influence of organic capping ligands on the growth kinetics of ZnO nanoparticles. Langmuir, 17:8362– 8367, 2001 137. F. Huang, H. Z. Zhang, and J. F. Banfield. Two-stage crystal-growth kinetics observed during hydrothermal coarsening of nanocrystalline ZnS. Nano Lett., 3:373–378, 2003 138. I. M. Lifshitz and V. V. Slyozov. The kinetics of precipitation from supersaturated solid solutions. J. Phys. Chem. Solids, 19:35–50, 1961 139. C. Wagner. Theorie der alterung von niederschlagen durch umlosen (ostwald-reifung). Z. Elektrochem., 65:581–591, 1961 140. H. Gr¨atz. Ostwald ripening: New relations betwenn particle growth and particle size distribution. Scrip. Mater., 37:9–16, 1997
Assembly and Properties of Nanoparticles
73
141. R. L. Penn, G. Oskam, T. J. Strathmann, P. C. Searson, A. T. Stone, and D. R. Veblen. Epitaxial assembly in aged colloids. J. Phys. Chem. B, 105:2177–2182, 2001 142. J. F. Banfield, S. A. Welch, H. Z. Zhang, T. T. Ebert, and R. L. Penn. Aggregation-based crystal growth and microstructure development in natural iron oxyhydroxide biomineralization products. Science, 289:751–754, 2000 143. X. G. Peng, L. Manna, W. D. Yang, J. Wickham, E. Scher, A. Kadavanich, and A. P. Alivisatos. Shape control of CdSe nanocrystals. Nature, 404:59–61, 2000 144. R. L. Penn and J. F. Banfield. Morphology development and crystal growth in nanocrystalline aggregates under hydrothermal conditions: Insights from titania. Geochim. Cosmochim. Acta, 63:1549–1557, 1999 ´ 145. E. J. H. Lee. S´ıntese e caracterizac¸a˜ o de nanopart´ıculas de Oxido de estanho obtidas a partir de suspens˜oes coloidais. Master’s thesis, Univ. Fed. S. Carlos, 2004 146. M. Nespolo and G. Ferraris. The oriented attachment mechanims in the formation of twins – a survey. Eur. J. Mineral., 16:401–406, 2004 147. M. Nespolo, G. Ferraris, S. Durovic, and Y. Takeuchi. Twins vs. modular crystal structures. Z. Kristallogr., 219:773–778, 2004 148. M. Nespolo and G. Ferraris. Applied geminography – symmetry analysis of twinned crystals and definition of twinning by reticular polyholohedry. Acta Cryst. A, 60:89–95, 2004 149. M. Nespolo and G. Ferraris. Hybrid twinning – a cooperative type of oriented crystal association. Z. Kristallogr., 220:317–323, 2005 150. R. L. Penn and J. F. Banfield. Oriented attachment and growth, twinning, polytypism, and formation of metastable phases: Insights from nanocrystalline TiO2 . Am. Mineralogist, 83: 1077–1082, 1998 151. Y. Chushkin, M. Ulmeanu, S. Luby, E. Majkova, I. Kostic, P. Klang, V. Holy, Z. Bochnicek, M. Giersig, M. Hilgendorff, and T. H. Metzger. Structural study of self-assembled Co nanoparticles. J. Appl. Phys., 94:7743–7748, 2003 152. J. Polleux, N. Pinna, M. Antonietti, and M. Niederberger. Ligand-directed assembly of preformed titania nanocrystals into highly anisotropic nanostructures. Adv. Mater., 16:436–439, 2004 153. J. Polleux, N. Pinna, M. Antonietti, C. Hess, U. Wild, R. Schlogl, and M. Niederberger. Ligand functionality as a versatile tool to control the assembly behavior of preformed titania nanocrystals. Chem.-a Europ. J., 11:3541–3551, 2005 154. E. J. H. Lee, C. Ribeiro, E. Longo, and E. R. Leite. Oriented attachment: An effective mechanism in the formation of anisotropic nanocrystals. J. Phys. Chem. B, 109:20842–20846, 2005 155. W. W. Mullins. 2-dimensional motion of idealized grain boundaries. J. Appl. Phys., 27:900– 904, 1956 156. P. Feltham. Grain growth in metals. Acta Metallurgica, 5:97–105, 1957 157. M. Hillert. On theory of normal and abnormal grain growth. Acta Metallurgica, 13:227, 1965 158. N. P. Louat. Theory of normal grain-growth. Acta Metallurgica, 22:721–724, 1974 159. G. Herrmann, H. Gleiter, and G. Baro. Investigation of low-energy grain-boundaries in metals by a sintering technique. Acta. Met., 24:353–359, 1976 160. H. Sautter, H. Gleiter, and G. Baro. Effect of solute atoms on energy and structure of grainboundaries. Acta. Met., 25:467–473, 1977 161. U. Erb and H. Gleiter. Effect of temperature on the energy and structure of grain-boundaries. Scrip. Metall., 13:61–64, 1979 162. H. Kuhn, G. Baero, and H. Gleiter. Energy-misorientation relationship of grain-boundaries. Acta. Met., 27:959–963, 1979. 163. D. Moldovan, D. Wolf, and S. R. Phillpot. Theory of diffusion-accommodated grain rotation in columnar polycrystalline microstructures. Acta Materialia, 49:3521–3532, 2001 164. D. Moldovan, V. Yamakov, D. Wolf, and S. R. Phillpot. Scaling behavior of grain-rotationinduced grain growth. Phys. Rev. Lett., 89:206101–1, 2002 165. D. Moldovan, D. Wolf, S. R. Phillpot, and A. J. Haslam. Role of grain rotation during grain growth in a columnar microstructure by mesoscale simulation. Acta Materialia, 50: 3397–3414, 2002
74
C. Ribeiro and E.R. Leite
166. A. J. Haslam, D. Moldovan, V. Yamakov, D. Wolf, S. R. Phillpot, and H. Gleiter. Stressenhanced grain growth in a nanocrystalline material by molecular-dynamics simulation. Acta Materialia, 51:2097–2112, 2003 167. H. L. Zhu and R. S. Averback. Sintering of nano-particle powders: Simulations and experiments. Mater. Manuf. Process., 11:905–923, 1996 168. H. L. Zhu and R. S. Averback. Sintering processes of two nanoparticles: A study by molecular-dynamics. Philos. Mag. Lett., 73:27–33, 1996 169. M. Yeadon, J. C. Yang, R. S. Averback, J. W. Bullard, D. L. Olynick, and J. M. Gibson. In-situ observations of classical grain growth mechanisms during sintering of copper nanoparticles on (001) copper. Appl. Phys. Lett., 71:1631–1633, 1997 170. M. Yeadon, M. Ghaly, J. C. Yang, R. S. Averback, and J. M. Gibson. Contact epitaxy observed in supported nanoparticles. Appl. Phys. Lett., 73:3208–3210, 1998 171. K. E. Harris, V. V. Singh, and A. H. King. Grain rotation in thin films of gold. Acta Materialia, 46:2623–2633, 1998 172. C. Ribeiro, E. J. H. Lee, T. R. Giraldi, R. Aguiar, E. Longo, and E. R. Leite. In situ oriented crystal growth in a ceramic nanostructured system. J. Appl. Phys., 97:024313–1–4, 2005 173. S. A. Kukushkin and A. V. Osipov. New phase formation on solid surfaces and thin film condensation. Prog. Surf. Sci., 5:1–107, 1996 174. F. Huang, H. Z. Zhang, and J. F. Banfield. The role of oriented attachment crystal growth in hydrothermal coarsening of nanocrystalline ZnS. J. Phys. Chem. B, 107:10470–10475, 2003 175. R. L. Penn. Kinetics of oriented aggregation. J. Phys. Chem. B, 108:12707–12712, 2004 176. C. Ribeiro, E. J. H. Lee, T. R. Giraldi, J. A. Varela, E. Longo, and E. R. Leite. Study of synthesis variables in the nanocrystal growth behavior of tin oxide processed by controlled hydrolysis. J. Phys. Chem. B, 108:15612–15617, 2004 177. M. von Smoluchowski. Versuch einer mathematischen theorie der koagulationkinetik kollider l¨osungen. Z. Phys. Chem., Stoechiom. Verwandtschaftsl, 29:129–168, 1917 178. D. Mozyrsky and V. Privman. Diffusional growth of colloids. J. Chem. Phys., 110:9254– 9258, 1999 179. N. J. Wagner. The smoluchowski equation for colloidal suspensions developed and analyzed through the generic formalism. J. Non-newtonian Fluid Mech., 96:177–201, 2001 180. O. A. Linnikov. Spontaneous crystallization of potassium chloride from aqueous and aqueous-ethanol solutions part 1: Kinetics and mechanism of the crystallization process. Cryst. Res. Technol., 39:516–528, 2004 181. O. A. Linnikov. Spontaneous crystallization of potassium chloride from aqueous and aqueous-ethanol solutions part 2: Mechanism of aggregation and coalescence of crystals. Cryst. Res. Technol., 39:529–539, 2004 182. T. Arita, O. Kajimoto, M. Terazima, and Y. Kimura. Experimental verification of the smoluchowski theory for a bimolecular diffusion-controlled reaction in liquid phase. J. Chem. Phys., 120:7071–7074, 2004 183. J. H. Yu, J. Joo, H. M. Park, S. I. Baik, Y. W. Kim, S. C. Kim, and T. Hyeon. Synthesis of quantum-sized cubic ZnS nanorods by the oriented attachment mechanism. J. Am. Chem. Soc., 127:5662–5670, 2005 184. D. V. Talapin, E. V. Shevchenko, C. B. Murray, A. Kornowski, S. Forster, and H. Weller. Cdse and CdSe/CdS nanorod solids. J. Am. Chem. Soc., 126:12984–12988, 2004 185. M. Adachi, Y. Murata, J. Takao, J. T. Jiu, M. Sakamoto, and F. M. Wang. Highly efficient dye-sensitized solar cells with a titania thin-film electrode composed of a network structure of single-crystal-like TiO2 nanowires made by the “oriented attachment” mechanism. J. Am. Chem. Soc., 126:14943–14949, 2004 186. L. Vayssieres, C. Chaneac, E. Tronc, and J. P. Jolivet. Size tailoring of magnetite particles formed by aqueous precipitation: An example of thermodynamic stability of nanometric oxide particles. J. Colloid Interface Sci., 205:205–212, 1998 187. L. Vayssieres, A. Hagfeldt, and S. E. Lindquist. Purpose-built metal oxide nanomaterials. The emergence of a new generation of smart materials. Pure Appl. Chem., 72:47–52, 2000 188. L. Vayssieres, K. Keis, A. Hagfeldt, and S. E. Lindquist. Three-dimensional array of highly oriented crystalline ZnO microtubes. Chem. Mater., 13:4395–4398, 2001
Assembly and Properties of Nanoparticles
75
189. L. Vayssieres, K. Keis, S. E. Lindquist, and A. Hagfeldt. Purpose-built anisotropic metal oxide material: 3D highly oriented microrod array of zno. J. Phys. Chem. B, 105:3350–3352, 2001 190. L. Vayssieres, N. Beermann, S. E. Lindquist, and A. Hagfeldt. Controlled aqueous chemical growth of oriented three-dimensional crystalline nanorod arrays: Application to iron(III) oxides. Chem. Mater., 13:233–235, 2001 191. L. Vayssieres, L. Rabenberg, and A. Manthiram. Aqueous chemical route to ferromagnetic 3-d Arrays of iron nanorods. Nano Lett., 2:1393–1395, 2002 192. L. Vayssieres and A. Manthiram. 2-d mesoparticulate arrays of alpha-Cr2 O3 . J. Phys. Chem. B, 107:2623–2625, 2003 193. L. Vayssieres. Growth of arrayed nanorods and nanowires of ZnO from aqueous solutions. Adv. Mater., 15:464–466, 2003 194. L. Vayssieres and M. Graetzel. Highly ordered SnO2 nanorod arrays from controlled aqueous growth. Angewandte Chemie-international Edition, 43:3666–3670, 2004 195. L. Vayssieres, C. Sathe, S. M. Butorin, D. K. Shuh, J. Nordgren, and J. H. Guo. Onedimensional quantum-confinement effect in alpha-Fe2 O3 ultrafine nanorod arrays. Adv. Mater., 17:2320, 2005 196. J. Turkevich, P. C. Stevenson, and J. Hillier. A study of the nucleation and growth processes in the synthesis of colloidal gold. Discuss. Farad. Soc., 11:55, 1951 197. H. Bonnemann and R. M. Richards. Nanoscopic metal particles – Synthetic methods and potential applications. Europ. J. Inorg. Chem., 10:2455–2480, 2001 198. E. Bourgeat-Lami. Organic-inorganic nanostructured colloids. J. Nanosci. Nanotechnol., 2:1–24, 2002 199. C. Sanchez, G. J. D. A. Soler-Illia, F. Ribot, T. Lalot, C. R. Mayer, and V. Cabuil. Designed hybrid organic-inorganic nanocomposites from functional nanobuilding blocks. Chem. Mater., 13:3061–3083, 2001 200. J. S. Bradley, J. M. Millar, and E. W. Hill. Surface-chemistry on colloidal metals – a highresolution nuclear-magnetic-resonance study of carbon-monoxide adsorbed on metallic palladium crystallites in colloidal suspension. J. Am. Chem. Soc., 113:4016–4017, 1991 201. M. A. Hayat. Colloidal Gold: Methods and Applications. Academic, San Diego, CA, 1989 202. C. D. Keating, M. D. Musick, M. H. Keefe, and M. J. Natan. Kinetics and thermodynamics of Au colloid monolayer self-assembly – undergraduate experiments in surface and nanomaterials chemistry. J. Chem. Education, 76:949–955, 1999 203. P. R. Vanrheenen, M. J. Mckelvy, and W. S. Glaunsinger. Synthesis and characterization of small platinum particles formed by the chemical-reduction of chloroplatinic acid. J. Solid State Chem., 67:151–169, 1987 204. T. Ould Ely, C. Amiens, B. Chaudret, E. Snoeck, M. Verelst, M. Respaud, and J. M. Broto. Synthesis of nickel nanoparticles. Influence of aggregation induced by modification of poly(vinylpyrrolidone) chain length on their magnetic properties. Chem. Mater., 11:526–+, 1999 205. F. Dassenoy, K. Philippot, T. Ould-Ely, C. Amiens, P. Lecante, E. Snoeck, A. Mosset, M. J. Casanove, and B. Chaudret. Platinum nanoparticles stabilized by CO and octanethiol ligands or polymers: FT-IR, NMR, HREM and WAXS studies. New J. Chem., 22:703–711, 1998 206. J. Osuna, D. deCaro, C. Amiens, B. Chaudret, E. Snoeck, M. Respaud, J. M. Broto, and A. Fert. Synthesis, characterization, and magnetic properties of cobalt nanoparticles from an organometallic precursor. J. Phys. Chem., 100:14571–14574, 1996 207. A. Rodriguez, C. Amiens, B. Chaudret, M. J. Casanove, P. Lecante, and J. S. Bradley. Synthesis and isolation of cuboctahedral and icosahedral platinum nanoparticles. ligand-dependent structures. Chem. Mater., 8:1978–1986, 1996 208. A. Duteil, R. Queau, B. Chaudret, R. Mazel, C. Roucau, and J. S. Bradley. Preparation of organic solutions or solid films of small particles of ruthenium, palladium, and platinum from organometallic precursors in the presence of cellulose derivatives. Chem. Mater., 5: 341–347, 1993
76
C. Ribeiro and E.R. Leite
209. T. Ould Ely, C. Pan, C. Amiens, B. Chaudret, F. Dassenoy, P. Lecante, M. J. Casanove, A. Mosset, M. Respaud, and J. M. Broto. Nanoscale bimetallic CoxPt1-x particles dispersed in poly(vinylpyrrolidone): Synthesis from organometallic precursors and characterization. J. Phys. Chem. B, 104:695–702, 2000 210. M. Figlarz. Chimie-douce – a new route for the preparation of new materials – some examples. Chemica Scripta, 28:3–7, 1988 211. G. Viau, F. Ravel, O. Acher, F. Fievetvincent, and F. Fievet. Preparation and microwave characterization of spherical and monodisperse co-ni particles. J. Magn. Magn. Mater., 140: 377–378, 1995 212. C. B. Murray, S. H. Sun, H. Doyle, and T. Betley. Monodisperse 3d transition-metal (Co, Ni, Fe) nanoparticles and their assembly into nanoparticle superlattices. MRS Bull., 26:985–991, 2001 213. J. I. Park and J. Cheon. Synthesis of “solid solution” and “core-shell” type cobalt-platinum magnetic nanoparticles via transmetalation reactions. J. Am. Chem. Soc., 123:5743–5746, 2001 214. J. R. Thomas. Preparation and magnetic properties of colloidal cobalt particles. J. Appl. Phys., 37:2914, 1966 215. S. J. Park, S. Kim, S. Lee, Z. G. Khim, K. Char, and T. Hyeon. Synthesis and magnetic studies of uniform iron nanorods and nanospheres. J. Am. Chem. Soc., 122:8581–8582, 2000 216. V. F. Puntes, K. M. Krishnan, and A. P. Alivisatos. Colloidal nanocrystal shape and size control: The case of cobalt. Science, 291:2115–2117, 2001 217. M. Chen and D. E. Nikles. Synthesis, self-assembly, and magnetic properties of FexCoyPt100-x-y nanoparticles. Nano Lett., 2:211–214, 2002 218. S. R. Whaley, D. S. English, E. L. Hu, P. F. Barbara, and A. M. Belcher. Selection of peptides with semiconductor binding specificity for directed nanocrystal assembly. Nature, 405: 665–668, 2000 219. L. O. Brown and J. E. Hutchison. Formation and electron diffraction studies of ordered 2-D and 3-D superlattices of amine-stabilized gold nanocrystals. J. Phys. Chem. B, 105: 8911–8916, 2001 220. S. H. Sun, S. Anders, H. F. Hamann, J. U. Thiele, J. E. E. Baglin, T. Thomson, E. E. Fullerton, C. B. Murray, and B. D. Terris. Polymer mediated self-assembly of magnetic nanoparticles. J. Am. Chem. Soc., 124:2884–2885, 2002 221. A. L. Roest, J. J. Kelly, D. Vanmaekelbergh, and E. A. Meulenkamp. Staircase in the electron mobility of a ZnO quantum dot assembly due to shell filling. Phys. Rev. Lett., 89:36801–1–4, 2002 222. H. Weller. Quantized semiconductor particles – a novel state of matter for materials science. Adv. Mater., 5:88–95, 1993 223. J. Y. Ying. Preface to the special issue: Sol-gel derived materials. Chem. Mater., 9:2247– 2248, 1997 224. C. Sanchez, J. Livage, M. Henry, and F. Babonneau. Chemical modification of alkoxide precursors. J. Non-Cryst. Solids, 100:65–76, 1988 225. V. K. Lamer and R. H. Dinegar. Theory, production and mechanism of formation of monodispersed hydrosols. J. Am. Chem. Soc., 72:4847–4854, 1950 226. W. Stober, A. Fink, and E. Bohn. Controlled growth of monodisperse silica spheres in micron size range. J. Colloid Interface Sci., 26:62, 1968 227. H. Boukari, J. S. Lin, and M. T. Harris. Probing the dynamics of the silica nanostructure formation and growth by saxs. Chem. Mater., 9:2376–2384, 1997 228. H. Boukari, J. S. Lin, and M. T. Harris. Small-angle x-ray scattering study of the formation of colloidal silica particles from alkoxides: Primary particles or not? J. Colloid Interface Sci., 194:311–318, 1997 229. H. Boukari, G. G. Long, and M. T. Harris. Polydispersity during the formation and growth of the stober silica particles from small-angle x-ray scattering measurements. J. Colloid Interface Sci., 229:129–139, 2000 230. M. T. Harris and C. H. Byers. Effect of solvent on the homogeneous precipitation of titania by titanium ethoxide hydrolysis. J. Non-Cryst. Solids, 103:49–64, 1988
Assembly and Properties of Nanoparticles
77
231. T. Sato and R. Ruch. Stabilization of Colloidal Dispersion by Polymer Adsorption. Marcel Dekker , New York, 1980 232. D. H. Napper. Polymer Stabilization of Colloidal Dispersion. Academic, New York, 1983 233. J. L. Look and C. F. Zukoski. Alkoxide-derived titania particles – use of electrolytes to control size and agglomeration levels. J. Am. Ceramic Soc., 75:1587–1595, 1992 234. J. L. Deiss, P. Anizan, S. ElHadigui, and C. Wecker. Steric stability of TiO2 nanoparticles in aqueous dispersions. Colloids Surf. A-physicochem. Eng. Aspects, 106:59–62, 1996 235. A. M. Peiro, J. Peral, C. Domingo, X. Domenech, and J. A. Ayllon. Low-temperature deposition of TiO2 thin films with photocatalytic activity from colloidal anatase aqueous solutions. Chem. Mater., 13:2567–2573, 2001 236. R. W. Schwartz. Chemical solution deposition of perovskite thin films. Chem. Mater., 9:2325–2340, 1997 237. C. Liu, B. S. Zou, A. J. Rondinone, and Z. J. Zhang. Sol–gel synthesis of free-standing ferroelectric lead zirconate titanate nanoparticles. J. Am. Chem. Soc., 123:4344–4345, 2001 238. S. O’Brien, L. Brus, and C. B. Murray. Synthesis of monodisperse nanoparticles of barium titanate: Toward a generalized strategy of oxide nanoparticle synthesis. J. Am. Chem. Soc., 123:12085–12086, 2001 239. J. J. Urban, W. S. Yun, Q. Gu, and H. Park. Synthesis of single-crystalline perovskite nanorods composed of barium titanate and strontium titanate. J. Am. Chem. Soc., 124: 1186–1187, 2002 240. R. M. Barrer. Hydrothermal Chemistry of Zeolites. Academic, London, 1982 241. S. Mintova, N. H. Olson, V. Valtchev, and T. Bein. Mechanism of zeolite a nanocrystal growth from colloids at room temperature. Science, 283:958–960, 1999 242. C. C. Wang and J. Y. Ying. Sol-gel synthesis and hydrothermal processing of anatase and rutile titania nanocrystals. Chem. Mater., 11:3113–3120, 1999 243. L. X. Cao, H. B. Wan, L. H. Huo, and S. Q. Xi. A novel method for preparing ordered SnO2 /TiO2 alternate nanoparticulate films. J. Colloid Interface Sci., 244:97–101, 2001 244. T. Nutz and M. Haase. Wet-chemical synthesis of doped nanoparticles: Optical properties of oxygen-deficient and antimony-doped colloidal SnO2 . J. Phys. Chem. B, 104:8430–8437, 2000 245. G. S. Pang, S. G. Chen, Y. Koltypin, A. Zaban, S. H. Feng, and A. Gedanken. Controlling the particle size of calcined SnO2 nanocrystals. Nano Lett., 1:723–726, 2001 246. R. S. Hiratsuka, S. H. Pulcinelli, and C. V. Santilli. Formation of SnO2 gels from dispersed sols in aqueous colloidal solutions. J. Non-crystalline Solids, 121:76–83, 1990 247. C. Goebbert, R. Nonninger, M. A. Aegerter, and H. Schmidt. Wet chemical deposition of ATO and ITO coatings using crystalline nanoparticles redispersable in solutions. Thin Solid Films, 351:79–84, 1999 248. A. P. Rizzato, L. Broussous, C. V. Santilli, S. H. Pulcinelli, and A. F. Craievich. Structure of SnO2 alcosols and films prepared by sol-gel dip coating. J. Non-Crystalline Solids, 284:61– 67, 2001 249. E. A. Meulenkamp. Synthesis and growth of ZnO nanoparticles. J. Phys. Chem. B, 102: 5566–5572, 1998 250. M. Z. C. Hu, R. D. Hunt, E. A. Payzant, and C. R. Hubbard. Nanocrystallization and phase transformation in monodispersed ultrafine zirconia particles from various homogeneous precipitation methods. J. Am. Ceramic Soc., 82:2313–2320, 1999 251. M. D. Fokema, E. Chiu, and J. Y. Ying. Synthesis and characterization of nanocrystalline yttrium oxide prepared with tetraalkylammonium hydroxides. Langmuir, 16:3154–3159, 2000 252. E. R. Leite, T. R. Giraldi, F. M. Pontes, E. Longo, A. Beltran, and J. Andres. Crystal growth in colloidal tin oxide nanocrystals induced by coalescence at room temperature. Appl. Phys. Lett., 83:1566–1568, 2003 253. E. R. Leite, E. J. H. Lee, T. R. Giraldi, F. M. Pontes, and E. Longo. A simple and novel method to synthesize doped and undoped SnO2 nanocrystals at room temperature. J. Nanosci. Nanotechnol., 4:774–778, 2004
78
C. Ribeiro and E.R. Leite
254. L. Spanhel and M. A. Anderson. Semiconductor clusters in the sol–gel process – quantized aggregation, gelation, and crystal-growth in concentrated zno colloids. J. Am. Chem. Soc., 113:2826–2833, 1991 255. N. L. Wu, S. Y. Wang, and I. A. Rusakova. Inhibition of crystallite growth in the sol–gel synthesis of nanocrystalline metal oxides. Science, 285:1375–1377, 1999 256. A. Vioux. Nonhydrolytic sol-gel routes to oxides. Chem. Mater., 9:2292–2299, 1997 257. J. Rockenberger, E. C. Scher, and A. P. Alivisatos. A new nonhydrolytic single-precursor approach to surfactant-capped nanocrystals of transition metal oxides. J. Am. Chem. Soc., 121:11595–11596, 1999 258. E. R. Camargo, M. Popa, J. Frantti, and M. Kakihana. Wet-chemical route for the preparation of lead zirconate: An amorphous carbon- and halide-free precursor synthesized by the hydrogen peroxide based route. Chem. Mater., 13:3943–3948, 2001 259. E. R. Camargo, J. Frantti, and M. Kakihana. Low-temperature chemical synthesis of lead zirconate titanate (PZT) powders free from halides and organics. J. Mater. Chem., 11:1875– 1879, 2001 260. E. R. Camargo and M. Kakihana. Peroxide-based route free from halides for the synthesis of lead titanate powder. Chem. Mater., 13:1181–1184, 2001 261. E. R. Camargo and M. Kakihana. Lead hafnate (PbHfO3) perovskite powders synthesized by the oxidant peroxo method. J. Am. Ceramic Soc., 85:2107–2109, 2002 262. M. Kakihana. “sol–gel” preparation of high temperature superconducting oxides. J. Sol-gel Sci. Technol., 6:7–55, 1996 263. P. A. Lessing. Mixed-cation oxide powders via polymeric precursors. Am. Ceramic Soc. Bull., 68:1002–1007, 1989 264. S. G. Cho, P. F. Johnson, and R. A. Condrate. Thermal-decomposition of (sr, ti) organic precursors during the pechini process. J. Mater. Sci., 25:4738–4744, 1990 265. E. R. Leite, C. M. G. Sousa, E. Longo, and J. A. Varela. Influence of polymerization on the synthesis of srtio3.1. characteristics of the polymeric precursors and their thermaldecomposition. Ceramics Int., 21:143–152, 1995 266. E. R. Leite, J. A. Varela, E. Longo, and C. A. Paskocimas. Influence of polymerization on the synthesis of srtio3.2. particle and agglomerate morphologies. Ceramics Int., 21:153–158, 1995 267. M. Kakihana, T. Okubo, M. Arima, O. Uchiyama, M. Yashima, M. Yoshimura, and Y. Nakamura. Polymerized complex synthesis of perovskite lead titanate at reduced temperatures: Possible formation of heterometallic (Pb,Ti)-citric acid complex. Chem. Mater, 9:451–456, 1997 268. M. Cerqueira, R. S. Nasar, E. R. Leite, E. Longo, and J. A. Varela. Synthesis and characterization of PLZT (9/65/35) by the Pechini method and partial oxalate. Mater. Lett., 35:166–171, 1998 269. H. Takahashi, M. Kakihana, Y. Yamashita, K. Yoshida, S. Ikeda, M. Hara, and K. Domen. Synthesis of NiO-loaded KTiNbO5 photocatalysts by a novel polymerizable complex method. J. Alloys Compounds, 285:77–81, 1999 270. M. A. L. Nobre, E. Longo, E. R. Leite, and J. A. Varela. Synthesis and sintering of ultra fine NaNbO3 powder by use of polymeric precursors. Mater. Lett., 28:215–220, 1996 271. E. R. Camargo, E. Longo, and E. R. Leite. Synthesis of ultra-fine columbite powder MgNb2O6 by the polymerized complex method. J. Sol–gel Sci. Technol., 17:111–121, 2000 272. A. L. Quinelato, E. Longo, E. R. Leite, and J. A. Varela. Synthesis of nanocrystalline tetragonal zirconia by a polymeric organometallic method. Appl. Organomet. Chem., 13:501–507, 1999 273. S. M. Zanetti, E. R. Leite, E. Longo, and J. A. Varela. Cracks developed during SrTiO3 thinfilm preparation from polymeric precursors. Appl. Organomet. Chem., 13:373–382, 1999 274. V. Bouquet, M. I. B. Bernardi, S. M. Zanetti, E. R. Leite, E. Longo, J. A. Varela, M. G. Viry, and A. Perrin. Epitaxially grown LiNbO3 thin films by polymeric precursor method. J. Mater. Res., 15:2446–2453, 2000
Assembly and Properties of Nanoparticles
79
275. F. M. Pontes, J. H. G. Rangel, E. R. Leite, E. Longo, J. A. Varela, E. B. Araujo, and J. A. Eiras. Low temperature synthesis and electrical properties of PbTiO3 thin films prepared by the polymeric precursor method. Thin Solid Films, 366:232–236, 2000 276. F. M. Pontes, E. R. Leite, E. Longo, J. A. Varela, E. B. Araujo, and J. A. Eiras. Effects of the postannealing atmosphere on the dielectric properties of (Ba, Sr)TiO3 capacitors: Evidence of an interfacial space charge layer. Appl. Phys. Lett., 76:2433–2435, 2000 277. F. M. Pontes, E. R. Leite, E. J. H. Lee, E. Longo, and J. A. Varela. Dielectric properties and microstructure of SrTiO3 /BaTiO3 multilayer thin films prepared by a chemical route. Thin Solid Films, 385:260–265, 2001 278. E. R. Leite, E. C. Paris, E. Longo, and J. A. Varela. Direct amorphous-to-cubic perovskite phase transformation for lead titanate. J. Am. Ceramic Soc., 83:1539–1541, 2000 279. S. M. Zanetti, E. R. Leite, E. Longo, and J. A. Varela. Preparation and characterization of SrBi2Nb2O9 thin films made by polymeric precursors. J. Mater. Res., 13:2932–2935, 1998 280. E. R. Leite, E. C. Paris, E. Longo, F. Lanciotti, C. E. M. Campos, P. S. Pizani, V. Mastelaro, C. A. Paskocimas, and J. A. Varela. Topotatic-like phase transformation of amorphous lead titanate to cubic lead titanate. J. Am. Ceramic Soc., 85:2166–2170, 2002 281. E. R. Leite, M. A. L. Nobre, M. Cerqueira, E. Longo, and J. A. Varela. Particle growth during calcination of polycation oxides synthesized by the polymeric precursors method. J. Am. Ceramic Soc., 80:2649–2657, 1997 282. C. Greskovich and K. W. Lay. Grain-growth in very porous a12o3 compacts. J. Am. Ceramic Soc., 55:142, 1972 283. E. R. Leite, I. T. Weber, E. Longo, and J. A. Varela. A new method to control particle size and particle size distribution of SnO2 nanoparticles for gas sensor applications. Adv. Mater., 12:96, 2000 284. E. R. Leite, A. P. Maciel, I. T. Weber, P. N. Lisboa, E. Longo, C. O. Paiva-Santos, A. V. C. Andrade, C. A. Pakoscimas, Y. Maniette, and W. H. Schreiner. Development of metal oxide nanoparticles with high stability against particle growth using a metastable solid solution. Adv. Mater., 14:905–908, 2002 285. J. Weissmuller. Alloy thermodynamics in nanostructures. J. Mater. Res., 9:4–7, 1994
Electrochemistry, Nanomaterials, and Nanostructures Paulo Roberto Bueno and Claude Gabrielli
Abstract This chapter deals with the development of new methods for the design of more efficient electrochemical cells destined specifically for energy conversion and storage based on synthesis and design of functional electrodes and electrolytes. The main focus of this chapter is on novel strategies that exploit nanoscale architectures to enhance the efficiency of alternative energy conversion and storage devices as well as on the basic principles of electrochemistry governing the effects of nanoscale design on electrodes and electrolytes. In addition, the chapter provides a review of fundamental electron transfer concepts of relevance to electrochemistry in general and alternative energy devices in particular.
1 Introduction An in-depth understanding of the processes involved in the operation of electrochemical cells is crucial in the development of new methods for the design of more efficient electrochemical cells destined specifically for energy conversion and storage. An indispensable aspect of this body of knowledge is a thorough grasp of the synthesis and design of functional electrodes and electrolytes with unusual and valuable properties which, today, are provided to a large extent by the nanosize effect of these cells’ functional components. Indeed, future developments in this field will necessarily depend on nanoscience and nanotechnology, as this chapter intends to demonstrate. The main focus of this chapter, therefore, is on novel strategies that exploit nanoscale architectures to enhance the efficiency of alternative energy conversion and storage devices and on the basic principles of electrochemistry governing the P.R. Bueno () Instituto de Qu´ımica, Departamento de F´ısico-Qu´ımica, Universidade Estadual Paulista, C. Postal 355, 14801-907, Araraquara, S˜ao Paulo, Brazil e-mail:
[email protected] E.R. Leite (ed.), Nanostructured Materials for Electrochemical Energy Production and Storage, Nanostructure Science and Technology, DOI 10.1007/978-0-387-49323-7 3, c Springer Science+Business Media LLC 2009
81
82
P.R. Bueno and C. Gabrielli
effects of nanoscale on electrodes and electrolytes. In addition, this chapter introduces basic principles of nanotechnology to guide the reader through this incipient interdisciplinary boundary. The scope of ensembles of nanosized objects and products that have been and can be created is truly remarkable. Moreover, the potential impact of these products on basic science and applications is so great that the subject is inexhaustible, particularly in view of the enormous diversity of nanosized objects. Therefore, this chapter must perforce be limited to objects and systems that already show real promise for a variety of applications. The electrochemical manufacture of small objects ranks high in the design of new materials and systems with special properties. However, although the mechanism of formation or removal of small individual portions of solids plays a decisive role in the field of electrochemical nanotechnology, the use of electrochemistry as a tool for the preparation of nanostructures for electrode and electronic applications lies outside the scope of this chapter. In other words, the absence of this and other related topics clearly indicates, from the start, that no attempt will be made to cover the field comprehensively here.
2 Electrochemistry and Nanoscale Materials 2.1 Electrochemistry and Size Effects Electrochemistry and nanoscience (and/or nanotechnology) are interdisciplinary fields, both of which are gaining increasing importance in the development of high performance and reliable alternative energy devices (conversion or storage) [1–3]. To begin to understand how these areas are interrelated to improve the performance of such devices, a brief explanation about both areas must be given. Electrochemistry, in turn, can be understood as the interaction between chemistry and electricity, although it encompasses far more than mere knowledge of chemical systems and the physics of electric fields or potential. As the name itself suggests, electrochemistry is a field of science that deals with the relationship between electrical current or potential and chemical systems. From a more specific standpoint, electrochemistry addresses the chemical and physical transformations underlying chemical energy storage and conversion and their relationship to limitations in the performance of electrochemical systems [2–6]. Modern electrochemistry covers all phenomena in which a chemical change is the result of electric forces and vice versa, where an electric force is generated by chemical processes. It includes the properties and behavior of electrolytic conductors in liquid or solid form. Moreover, modern electrochemistry can be divided into interfacial electrochemistry (electrochemistry of heterogeneous systems) and bulk electrochemistry (electrochemistry of homogeneous systems). On the one hand, interfacial electrochemistry differs from bulk electrochemistry by dealing with topics such as the nature of an electrode–electrolyte interphase, the thermodynamics and kinetics of reactions occurring in the interphase and mass-transport effects throughout it [2–6]. On the other hand, bulk electrochem-
Electrochemistry, Nanomaterials, and Nanostructures
83
istry deals with ion–solvent and ion–ion interactions, activity coefficient, ionic mobility, ionic conductivity, and so on [2–6]. Bulk electrochemistry describes the performance of electrolytes and is the key to future improvements in electrochemical components used as ionic sources and membranes in solar energy devices for electric power production, energy storage, e.g., batteries and supercapacitors, as well as advanced electroanalytical sensor devices [2–6]. Bulk electrochemistry is discussed briefly here, in the context of ionic conductivity of solid-state electrolytes. However, most of this chapter focuses on the fundaments of interfacial electrochemistry and its relationship to nanostructures, which is of vital importance in electrochemical alternative energy devices. The term nanotechnology has been defined in a variety of ways; however, we will define it here as the technology of design, manufacture and application of nanostructures and nanomaterials [7, 8]. The study of the fundamental relationships between physical and chemical phenomena and materials’ dimensions on a nanometric scale are also referred to as nanoscience. Nanotechnology involves the fabrication, characterization, and manipulation of materials with at least one dimension in the range of 1–100 nm. Thanks to their diminutive size, nanoscale objects will lead to groundbreaking discoveries and are expected to be at the forefront of technological innovation for the next decade. The interrelation between interfacial electrochemistry and nanoscience gives rise to new possibilities for designing chemical surfaces by controlling surface structures at the molecular level, leading to innovative metal or semiconductor surfaces and charge transfer lengths. Improved nanostructured devices based on nanostructured electroactive material can be designed in different ways [9–15]. For instance, the interfacial electrochemical properties of specific materials can govern the performance of charge accumulating at the interface, leading to highly efficient double layer capacitors [16–24]. In bulk electrochemistry, a proper understanding of the high performance of ionconduction properties on a nanolength scale is crucial [25–29]. Other examples will be discussed later herein. Micrometric-scale materials generally display the same physical properties as those in bulk form; however, nanometric-scale materials may exhibit physical properties that are distinctively unlike those of bulk. Materials in this size range possess remarkable specific properties deriving from the transition from atoms or molecules to bulk form that takes place in this size range. On the one hand, the interfaces in polycrystalline microstructured materials are considered as defects that influence the macroscopic properties. On the other hand, in polycrystalline nanostructured materials, the interface dominates and the bulk plays a totally different role. Numerous experimental studies have shown that, if a material’s particle size is less than the critical size of about 10 nm, its bulk properties change noticeably. A particle of about 10 nm contains 104 –105 atoms, 1–5% of which are on the surface of the particle and contribute substantially to the material’s physicochemical properties [30]. Ensembles of such nanostructures will be shown here to be important in electrochemical applications such as electrodes [8, 9, 12, 13, 31–38]. Another example of the influence of nanometric effects is on the Debye temperature, which decreases in nanocrystalline systems, and is lower when the same
84
P.R. Bueno and C. Gabrielli
system is on a micrometric scale. Thus, the nanometric scale gives an additional contribution to the low-temperature heat capacity, and this contribution increases as the scale decreases [39]. This effect can be explained by changes in the nanocrystals’ vibrational status (an increase in the number of low frequency modes in response to a decrease in the number of high frequency modes) as the size decreases. Therefore, nanometricscale crystals have a low melting point (sometimes below 900◦ C) and reduced lattice constants, since the number of surface atoms or ions represents a significant fraction of the total number of atoms or ions. In this case, surface energy plays a significant role in the thermal stability, while bulk represents the defect in the properties. From this standpoint, nanotechnology can be considered new, but nanometer scale research is not new at all. Nanometric-scale engineering of many materials such as colloidal dispersion, metallic quantum dots and catalysts [37, 40–49] has existed for decades. Nanotechnology is therefore not a novelty; indeed, you can see it all around you if you just know where to look. Actually, nanotechnology is a combination of existing technologies, and our newfound ability to observe and manipulate on the atomic scale makes nanotechnology highly compelling from the scientific, business and political points of view. This aspect of nanotechnology was already foreseen in a conference presented by Nobel Prize winner Richard Feynman in 1959. One can visualize another example of the nanoscale effect by picturing a bulk material, e.g., a metal or n-type semiconductor metal oxide, simplistically, as consisting of charged particles, positive ions, and electrons in the first situation, and positive and negative ions in the second. In both cases, the total positive charge balances the total negative charge, so that there is no net electric charge in the material’s bulk. Now imagine reducing a piece of this material to the nanoscale by applying a top-down approach such as any lithographic technique in a vacuum medium. What electronic properties will such a small, strongly charged material have? Considering the vacuum as the environment in which these properties are embedded, there is a small degree of spillover of the electrons from the material into the vacuum, resulting in a disturbance of the former balance of electrical charge in the surface region of the materials, which in this case represents a substantial percentage of the total volume. Note that interfaces in micrometric or millimetric materials can also be electrified, but there are some differences. A totally different functionality arises on the nanoscale, because of the size range involved [30]. Indeed, changes in the electronic properties of nanoscale materials due to the size effect must be interpreted in the domain of quantum chemistry [50]. If the size of the nanocrystal is compared with the de Broglie wavelength of elementary excitations, the quantization conditions of electron energy are changed and the energy bands split into an energy system of energy level and, in this case, the pattern of the absorption spectrum becomes similar to that of the spectra of individual clusters. Semiconductor nanocrystals possessing these properties are called quantum dots [50]. The physicochemical properties of nanometric-scale materials are part of the domain of nanoscience but, in specific situations, nanomaterials can converge with electrochemistry. For instance, if our previously pictured nanomaterials (nanocrys-
Electrochemistry, Nanomaterials, and Nanostructures
85
talline particles) are immersed in an appropriate solution, a colloidal system is likely to arise [51, 52]. The use of nanoparticles to form colloidal systems has a long history, as exemplified by a comprehensive study about the preparation and properties of colloidal gold, which was first published in the mid-nineteenth century [53]. The colloidal dispersion of gold prepared by Michael Faraday in 1857 [54] remained stable for almost a century, showing no sign of spontaneous chemical degradation before it was destroyed in a Word War II air raid. Colloidal properties result from the combination of the properties of an electrified surface and nanomaterials/ solution, the structure of the double layer thus formed being the most important factor. In the emerging field of nanotechnology applied to electrode design, the goal is to create nanostructures or nanoarrays with special properties unlike those of bulk or single particle nanosize elements. Thus, if nanoparticles are combined in any way under a conductor substrate and inserted into an electrolyte, the resulting properties will differ from those produced under the same conditions but without nanoparticles or nanoscale materials [10, 12, 30, 37, 47]. Nanoparticles themselves, or an electrode composed of nanoparticles, can exhibit unique chemical properties because of the limited size and high density of corner or edge surface sites [7, 30, 55, 56], but as electrode-forming components, the most important properties are those arising from the charge transfer rate, electronic and ionic transport, etc. [8, 15, 30–32, 40, 42, 47, 57, 58]. It is a known fact that, from the standpoint of materials and surface science, many of the properties of systems are controlled by interfaces and contact between different materials [7]. However, knowledge of how to control and design new contact (electrodic or electronic) properties on a nanometer scale is new and is very rapidly gaining ground. Such contacts constitute the electrodes of galvanic cells which can be used for the generation of chemical products by electric power (electrolysis), as will be discussed later herein. It is of primary importance to know how to differentiate between electrochemical responses and events that result from changes in charge transfer length relating to the functionalized surface properties of nanoscale materials and those that arise from transport properties through nanostructures. It is easy to demonstrate that chemical reactions occurring in nanostructured electrodes (electrode reactions) and mass and electrical transportation in such electrodes, and even in electrolytes based on nanocomposites or other kinds of nanomaterials, will cause a tremendous revolution in every aspect of applied electrochemistry [8, 12, 13, 15, 30, 32–34, 36, 38, 42, 43, 57, 59–70]. The main focus here is to show how these nanoscale effects resulting from the use of designed nanostructured electrodes will inevitably contribute to the development of alternative energy devices based principally on concepts of electrochemistry. We, therefore, need to know more about how to deal with and take advantage of the continuous flow of electrons across electronic nanostructures and ionic species in a nanoscale ionic conductor (electrolyte). Furthermore, it is also important to understand how charge transfer lengths are influenced on the nanoscale and how size affects electrochemical properties [8, 30]. Accordingly, we will consistently address
86
P.R. Bueno and C. Gabrielli
the processes and factors affecting the transportation of charges across interfaces between nanostructured chemical phases. In the latter case, electrochemical reactions are involved and the transfer of electrons from the electronic phase to the ionic conducting phase is classified as an oxidation–reduction (redox) reaction. In the case of electrochemical conversion systems, it is also important to deal with charge transfers occurring from molecules to semiconducting nanoparticles [71].
2.2 Challenges of Charge Transfer It must also be emphasized that oxidation–reduction reactions always involve charge transfers, without which we can no longer exist [8]. Electron transfers are vital to our daily life. Indeed, we owe our very existence to photosynthetic and biochemical electron transfer events, and we would be unable to function properly without the myriad transistor-based electronic devices that control and amplify current flows. Electron transfer and charge storage are correlated in a series of events in our body. Another example of the importance of electron transfer reactions is photosynthesis, which photoelectrochemical systems designed for energy conversion attempt to imitate [3, 72]. In photosynthesis, a photon triggers an electrical current in the leaf, activating the leaf’s electrons to produce H2 while the holes produce O2 . Therefore, electron transfer events are basic to the understanding and development of novel generations of electrochemical energy conversion and storage systems based on the imitiation of the most efficient biological systems. Electrochemical energy conversion and storage devices form an important branch of alternative energy emerging in the twenty-first century [1] that, like nanotechnology, has crucial scientific, technological, and political implications. At this point, however, it is important to stress that despite the importance of properly grasping the charge transfer phenomenon, molecular and bulk level charge transfer processes are still not fully understood and the characterization of nanoscale (1–100 nm) processes is still incipient [8, 73]. Nanoscale charge transfer is important both to the frontiers of fundamental science and to applications in molecular electronics, including problems such as electrocatalysis [8] and solar photoconversion. Progress in the area of nanoscale charge transfer requires interdisciplinary collaboration, combining a wide range of materials synthesis and electrochemical characterization, a challenging range of experimental techniques to probe charge transfer processes, and theory for their interpretation [8]. Current interest ranges from the use of single or small groups of molecules (usually organic) as components in electronic devices to the exploitation of semiconductor and metal nanoparticles because of their high surface areas and other size-dependent properties. The nature of the attachment of such components to bulk metal and semiconductor surfaces and the control of their properties are overarching concerns [8]. The experimental measurements used to characterize nanoscale charge-transfer properties include
Electrochemistry, Nanomaterials, and Nanostructures
87
rate constants, spectroscopy, and conductance/resistance measurements, depending on the nature of the system studied [30]. Predictions of the kinetics of electrons taking into account all size-dependent factors are possible only when adequate ion-molecular models of reaction layers are built. For a number of systems, this problem can be solved successfully by employing quantum-chemical methods based on quantum mechanical theory of the charge-transfer elementary act [74, 75] along with the classical effects of the cation size, which are manifested in the reduction of anions on a negatively charged surface [74, 75]. In general, the characteristic dimensions of conventional components of electrochemical systems (electrodes, electrolytes and membranes) cover 5–10 orders of magnitude and the lower boundaries of the corresponding intervals approach typical sizes of specific space regions (layers) that arise only at the electrode–electrolyte junctions, generally called Electrical Double Layer (EDL) [3–6]. According to modern notions of the interface structure, the adsorbate layers and the edges of surface atoms on electrodes are spatially separated by gaps. In electrochemical systems, the properties of this gap depend on the electrode potential (charge). The prospect of using size effects to intensify electrode processes cannot be contemplated without including nanotechnology and electrode design. The latter will be introduced in Sect. 2.3.
2.3 Nanomaterials and Nanostructured Films as Electroactive Electrodes Earlier herein we mentioned several challenges posed by nanoscience and electrochemistry. Some aspects relating to electrified surfaces in contact with electrolyte, the so-called electrified interfaces in electrodics, metal– or semiconductor– electrolyte junctions whose properties can control charge transfer length, charge transfer kinetics, and the EDL structure, have been discussed briefly. These topics will be discussed in greater detail in other sections of this chapter. Also briefly mentioned earlier is the fact that the physical properties of the interface of nanoparticles in solution/solvent or electrolytes may lead not only to colloidal behavior but also to particle–particle interaction or particle–solvent interaction. Self-supporting colloid network structures allow for the coexistence of high conductivity with mechanical stability, enabling colloidal gels to be used as electrolytes [76–78]. Despite all these aspects of electrochemistry and nanoscale discussed so far, undoubtedly the most important question to be answered is “Why is nanoscience or nanotechnology so beneficial to electrochemical energy devices?” The answer lies in understanding the fundamental principles underpinning the electrochemical generation of electricity. The conversion of energy necessarily involves some kind of energy transfer step, whereby the energy from the source is
88
P.R. Bueno and C. Gabrielli
passed along to electrons, which constitute the electric current. This transfer occurs at a finite rate and must take place at an interface or reaction surface. Thus, the amount of electricity produced scales with the amount of reaction surface area or interfacial area available for the energy transfer. In other words, the efficiency of the reaction and the amount of reaction depend, respectively, on the features of the surface and on the extent of the surface. In this perspective, how can nanotechnology and electrochemical devices (e.g., energy conversion and storage devices) converge from a nanoscopic standpoint of electronic transfer, transport and kinetic reactions occurring in these devices? To begin answering this question, we must first offer a basic introduction to the term “electroactive materials” so popular in the electrochemical literature. Electroactive materials are materials that possess redox properties, and they play an increasingly central role in nanotechnology and electrochemistry. At present, the wide range of applications for these materials include electrodes and membranes for electrochemical energy conversion and storage, electroceramic electrode devices and sensors, organic diodes, and magnetic and optical devices [1, 7, 8, 43, 79–83]. Further along in this chapter we will discuss the concept and definition of electrodes and electrochemical cells. For now, an electrode can be considered a source or a sink of electrons to be interplayed with the ionic conductor in contact with it, while the electrochemical cell is composed of a source and a sink electrode separated by an ionic conductor (electrolyte). Therefore, all electroactive materials are potential electrodes. From the standpoint of nanotechnology, this material can be prepared on a nanoscale (to enlarge the surface area) mainly in three distinct forms (a) zerodimensional, (b) one-dimensional and (c) two-dimensional nanostructures. Therefore, it is not surprising that the desire for large surface areas has led researchers to focus on nanomaterials and electrochemistry in the search for nanosized structures for electrode applications. Nanomaterials include molecular wires, nanoparticles – both semiconducting and metallic, nanotubes, electrodes, and the connectors that link these objects together to create larger structures (Fig. 1). Other products, such as filled zeolites, aerogels, dendrites, and layered polymers, also offer enormous potential for useful electrochemical functions [8]. All these nanosized structures [from (a) to (c)] are synthesized using either one of two manufacturing concepts, i.e., top-down or bottom-up approaches. Based on these two approaches, several methods have been developed in recent years for the preparation of novel nanostructures [7]. In the case of (a), the zero-dimensional (0-D) nanostructure is composed of nanoparticles whose fabrication requires the control of more than merely their diminutive size. For any practical applications such as electroactive components in electrodes, the processing conditions must be controlled so that the resulting nanoparticles have the following characteristics (a) identical size of all particles (also referred to as monosized or quasi-monosized), (b) identical shape or morphology, and (c) identical or at least very similar chemical composition and crystal structure. Single crystalline nanoparticles are often referred to in the literature as nanocrystals. When the characteristic dimensions of nanoparticles are sufficiently small and quantum effects are observed, these nanoparticles are commonly
Electrochemistry, Nanomaterials, and Nanostructures
89
Fig. 1 Nanostructured electrodes can be prepared by several methodologies, many of them based on bottom–up approaches. This figure illustrated the ordered (left) and disordered (right) preparation of brushlike structures obtained from nanowires and/or nanotubes. We are indebted to Dr. Ednan Joanni for providing some parts of this schematic representation
described as quantum dots. From the electrochemical standpoint we are interested in the redox properties of such nanoparticles, which are generally metallic, inorganic or compounds. One-dimensional (1-D) nanostructures (b) are composed mainly of nanowires, nanorods and nanobelts. Spontaneous growth, template-based synthesis and electrospinning are considered bottom-up approaches, while lithography is a top-down technique [7, 84]. Two-dimensional (2-D) nanostructures (c) involve thin films, which have been the object of intensive study for almost a century and for which many methods have been developed and improved. Insofar as the concept of electrode is concerned, it is important to stress here that most electrodes for electrochemical application in alternative energy devices are manufactured mainly by interfacing semiconducting nanostructures with conducting substrates. By combining different electrodes, one can attain a three-dimensional (3-D) integrated electrochemical cell [85–87]. Electrodes can
90
P.R. Bueno and C. Gabrielli
also be developed based on a 3-D concept, whereby they are assembled using 0-D, 1-D, or 2-D nanostructures. 2-D-based electrodes can be fabricated as homogeneous thin films or by an assembly of 0-D and 1-D nanostructures; however, the film’s thickness must be limited to the nanoscale. 3-D electrodes can be similarly manufactured, but their thickness is not limited to nanolengths. Therefore, the assembly and synthesis of these nanostructures with multiple dimensions is common in electrochemistry. They are usually referred to as nanostructured electrodes and most of them are highly porous. The nanostructuring of electroactive materials introduces major changes in the electrochemical properties of the devices of which they are a part. For instance, dye-sensitized solar cells (DSSC) is an example of 2-D and 3-D nanometer-sized structures assembled with quasi 0-D structures or building blocks (nanoparticles). The charge transfer kinetics is often influenced and high surface areas provide greater numbers of electroactive charge transfer sites. A more specific example is the extremely large internal surface area, which is made possible by the nanocrystalline particle nature of nanostructured semiconductor electrodes. This huge surface area is crucial for the proper functioning of DSSCs for a number of reasons. Some of these reasons are (1) sufficient adsorption of the monolayer of dye molecules to achieve efficient light absorption, (2) the huge surface causes charge carrier percolation across the nanoparticulate lattice, and (3) the very rapid and highly efficient interfacial charge transfer between the oxide and each and every one of the dye molecules anchored to the particle surface. We have already shown here that large surface areas translate into enhanced electrochemical performance and, from this perspective, nanostructures are also very important for fuel cell devices [8,70,88–90], particularly as regards the catalyst part of the cell where the oxygen reduction reaction can only occur in spatially confined regions [8, 70, 88–90]. Returning to the subject of nanostructures designed and used as electrodes, it is easily observed from the electrochemical literature that 2-D or 3-D structured electrodes composed of architectures possessing high surface-to-volume ratio nanostructures, which are constituted by the arrangement of multiple dimensional nanostructures (0-D, 1-D, and 2-D), are extremely useful in energy storage or conversion device applications because they improve storage capacity and conversion [1, 8, 15, 37, 70, 86]. We will provide specific examples in this chapter, and several other examples are given in the handbook. As mentioned earlier, thin films can be considered 2-D nanostructures. In the recent past, thin film-based technologies have been responsible for the design of an enormous variety of thin film-based electrochemical devices. 2-D nanostructures [91] composed of 0-D or 1-D materials are those that are associated with the interfacial properties of electrodes. In electrochemistry they are known as porous electrodes, and they sometimes possess an effective surface more than 1,000 times greater than the geometric area expected for a compact and homogeneous 2-D structured electrode, e.g., porous thin film-related electrodes [92–96]. As can be seen, therefore, the porous effect is an important and significant aspect of nanostructures applied as electrodes. It is so important to note that, in the
Electrochemistry, Nanomaterials, and Nanostructures
91
electrochemical literature, this aspect leads to the use of terms such as porous electrodes when referring to nanostructured electrodes [92–101]. Porous, or nanostructured, electrodes form an electrochemical system when in contact with an electrolyte, leading to the simultaneous transport of electronic and ionic species. Owing to the minute scale of the constituents of the porous lattice, charge ionic carriers in transit are always close to the surface, implying that transport and heterogeneous transfer processes are strongly coupled in these systems [92–101]. We will discuss porous electrode theory further along in this chapter.
2.4 Nanomaterials as Electrolytes Nanoscience and nanotechnology influence not only the design of nanoscale electrodes but also that of nanoscale electrolytes [9, 28, 102–105]. The continuous research of new materials for electrolyte applications has led to advances in the design of nanostructured materials to improve ionic conductivity [25, 28, 102]. The development of new solid materials for electrolyte applications is creating opportunities for new types of electrical power generation and storage systems. Progress to date in solid-state ionics is largely the result of fast ionic conductors [29,106]. There are several new classes of materials based on the concept of nanoionics (nanostructured materials for use primarily as electrolytes). Solid ionic materials of this kind are based on nanoceramics, polymeric compounds, and hybrid organic–inorganic nanocomposites [102]. All these materials are being investigated to improve their transport properties for the ionic species of interest, e.g., lithium, proton, or oxygen. Therefore, enhancing the ionic conductivity of nanoscale materials is of great interest, for it offers a predictable way to design a wide range of new ionic materials with practical applications. An obvious technological target is the preparation of nanoscale lithium-ion conductors to make more efficient rechargeable batteries for portable electronics [107]. Many problems still remain to be solved, such as the scale-up of laboratory techniques for mass production. Nonetheless, the results achieved so far suggest that the emerging field of nanoionics has a healthy future [28, 107]. The concept behind nanoionic materials is based on the use of nanoscale effects to improve overall ionic conductivity [28]. Overall conductivity, which is the product of defect concentration and mobility, is low in simple classic inorganic solid ionic materials such as NaCl. The electrical conductivity at the melting point is eight orders of magnitude lower than in metal, and is almost impossible to measure at room temperature. The conductivities of a few materials even approach those of aqueous electrolyte solutions. Solid state electrolyte material began to attract serious attention with the discovery of new compounds and nanocompounds with high ionic conductivities, and with the demonstration of feasible devices, particularly solid-state batteries, fuel cells, and sensors [108,109]. Fuel cells based on these materials – known as fast-ion conductors or solid electrolytes – offer a highly efficient and clean method of large-scale energy production [109].
92
P.R. Bueno and C. Gabrielli
An example of classical solid state electrolyte is electrolytes based on zirconia polycrystalline material that conducts oxygen ions, with hydrogen as the fuel, air as the oxidant, and water as the waste product [109]. The fossil fuel crisis and the need for better energy management will lead to increased activity in this area, and interest in nanosized ionic materials continues to grow [1]. For example, the properties of electrolyte ceramic materials can be improved by the nanoscale surface properties. The surface properties of an ionic crystal create a space-charge region, in which the concentration of defects at the surface is governed by the energies of individual defects and one type of defect in a pair can dominate. As a result, the surface has an excess of one type of defect, as in the case of chemical doping, and ionic conduction in this region is enhanced accordingly [28, 110]. Some experiments and theories indicate that dramatic increases in ionic conductivity should be expected when the spacing of interfaces is comparable to, or smaller than, the space-charge layer [28, 110]. However, it is evident that lowering the length scale may lead to enhanced defect densities and, therefore, to enhanced ionic conductivities in the space charge regions, irrespective of yet unknown mobility effects. With regard to the safe storage of (sustainable) hydrogen, exciting new avenues are being opened for storage using nanosized and nanostructured materials [102]. While the quantum confinement regime has been explored for some ionic materials, it is evident that thus far only optical properties have been related to the quantum confinement regime. Electrical properties of solid electrolytes or mixed ionic–electronic conducting materials in the quantum confinement regime have not yet been described fully and represent a challenge to this field. The achieving of high ionic conductivity in nanostructure-based electrolytes requires a better understanding of the fundamentals of ion dissociation and transport in such kinds of nanosized materials [28].
2.5 Nanoscale Electronic and Ionic Transport Finally, considering what was discussed previously, when dealing with nanosized materials and nanostructured electrodes for electrochemistry, it is important to separate the different effects of interface on the electronic and ionic transport: the kinetics and mechanisms of transport along and across interfaces. The literature commonly considers transport along interfaces as grain boundary transport, corresponding to diffusion parallel to interfaces, as in grain boundaries of polycrystalline materials or in nanoscale materials, as across nanostructures limited to a thin layer of nanometric thickness. In contrast, transport across interfaces involves transport perpendicular to the interface. It is possible to show that, if one considers the correct description of ionic diffusion coefficient suction of a crystal, the value obtained for the ionic coefficient on the surface is abnormally high in the nanoscale compared with the microscale [111]. It has also been stated [72] that the coefficients of oxygen diffusion in TiO2
Electrochemistry, Nanomaterials, and Nanostructures
93
nanocrystals are 5–6 orders of magnitude greater than in bulk crystals and that the coefficients of diffusion of dissolved hydrogen in palladium nanocrystals are greater than in the bulk specimen. Oxygen conductivity can also be improved in the same way for ZrO2 -based solid electrolyte [102]. The same concept can be applied to interfaces between the components of rechargeable solid-state lithium ion batteries, thereby improving the performance and reducing the resistivities of dc batteries [102].
2.6 Energy Conversion and Storage in Electrochemistry The conversion and storage of energy by electrochemical devices is a highly important technological issue of debate, for it represents an entirely new source of energy generation affecting every aspect of our daily lives, and its efficiency is tied in with the concept of free energy (the capacity to do work, in the formal physical definition), which is the most fundamental resource. With an inexhaustible supply of free energy, almost anything can be done. According to the first law of thermodynamics, energy cannot be created or destroyed, but the critical constraint lies in the second law of thermodynamics. In the way it is usually expressed, the second law states that, in an isolated system, a quantity called entropy, having units of energy/temperature, must always increase in any spontaneous process. It therefore follows that increasing entropy, in turn, implies that free energy cannot be fully recycled. Although the total energy remains unchanged, less energy is available to perform useful work. A certain amount is irretrievably lost, in practice generally as low-grade waste heat, which from Earth is ultimately radiated out into space. Hence, ongoing sources of free energy (or just energy, loosely) are required for all biological and technological activities. Sunlight is the source for the biosphere. In the case of conventional technology, a whole suite of sources is used, but nowadays the predominant source is fossil fuels. These have a considerably higher energy density than that of sunlight. However, as fossil fuel supplies are expected to become increasingly scarce, expensive, and environmentally impacting, increasing dependence on energy conservation and alternative sources of energy are expected to become the most obvious solution, especially energy from the sun, i.e., solar energy. When the sun is directly overhead and the sky is clear, radiation on a horizontal surface is about 1, 000 W m2 [1, 71]. To give an example, photovoltaics and solar cells have, in fact, provided reliable electrical power to space missions for many years. Sunlight can be used for heating, lighting, and electricity generation, and it can be concentrated to provide steam to run turbines. The principal disadvantages of solar energy are still that, at present, the conversion efficiency of sunlight to electric power is not high, and sunlight varies according to the time of day, weather conditions and seasons. Closely related to solar cells are fuel cells, which convert fuel or chemical energy directly to electric energy. The main chemical reactions involve the oxidation of CO and H2 . Although fuel cells have been operating reliably and efficiently
94
P.R. Bueno and C. Gabrielli
in space missions for more than 40 years, they have not yet been widely used on Earth, largely because of their cost. To make this technology commercially competitive, better anode, cathode, and electrolyte materials and processes are needed [1]. However, what is the real importance of electrochemical alternative energy devices? There are several energy sources, as presented earlier. All of them involve electron transfer reactions, and their development and applications are growing rapidly [1, 71, 109, 112], especially because conventional energy supply technology is exhausting its resource base at an accelerating rate, exacerbated by the revolution of rising expectations in the less-developed world due to the global communications revolution. This rapid expansion in the study and development of electrochemical energy generation and conversion-based devices is due mainly to the fact that most of the world’s energy is supplied by fossil and nuclear sources, which face continual and increasingly severe issues of resource limitation and environmental pollution. To meet the growing global demand for energy and to compensate for the depletion of fossil fuel supplies in the coming years, alternative renewable sources of energy that do not depend on fossil fuels and that cause only marginal environmental impacts must be developed, offering low costs, safety, and higher efficiency. There is also a great demand for devices based on the concept of energy storage, i.e., on the electrochemical concept of storage of chemical energy. These devices are also required to supply mobile energy for the portable electronic devices upon which our modern lifestyle is so strongly dependent, for they are at the heart of modern mobility and convenience [107]. Indeed, electrochemical nanostructure-based devices offer an important solution to this dilemma, with the prospect of providing something approaching a sustainable standard of living for the entire world (so far enjoyed only by industrialized countries), since they provide the capability for developing more efficient devices in all areas involving electrochemical alternative energy while causing a low environmental impact (sustainable development).
3 Overview of the Principles of Operation of Energy Conversion and Storage Devices To understand the basic principles of operation of an energy conversion or storage device it is important to know what an electrochemical cell is. Basically, it is a device in which a chemical reaction either generates or is caused by an electric current. A galvanic cell is an electrochemical cell in which a spontaneous chemical reaction is used to generate an electric current. An electrolytic cell, in turn, is an electrochemical cell in which a reaction is driven in its nonspontaneous direction by an externally applied electric current. There are three types of galvanic cell: the primary, the secondary, and the fuel cell [5, 6]. Primary galvanic cells are those in which the reactants are built-in during the manufacturing process, while secondary cells are those that must be charged (i.e.,
Electrochemistry, Nanomaterials, and Nanostructures
95
1.00
20.4 nM
0.75
10.2 nM
0.50
0.0 nM
0.25
0
0.25
0.50
0.75
0 1.00
μm
Fig. 2 Design of 2-D and 3-D nanostructures from 0-D nanostructures. Both 2-D and 3-D nanostructures are very commonly applied as electroactive materials in the manufacture of nanostructured porous electrodes
used as electrolytic cells) before the reactants are present for the reverse, spontaneous reaction [5, 6]. Fuel cells are the type of galvanic cells in which the reactants are supplied continuously as they produce current. An electrochemical cell comprises two electrodes in contact with an electrolyte, i.e., an ionic conductor. These electrodes are called cathodes and anodes. A cathode is the electrode that acts as a source of site for reduction reactions in the electrochemical cell, while an anode is the electrode that acts as a source of site for oxidation reactions. Therefore, the removal of electrons that occurs in the anode can be described as follows: (1) Ared → Aox + e− ,
96
P.R. Bueno and C. Gabrielli
in which Ared is the reduced form of a site or species and Aox is the oxidized site or species in the anode. The following reaction occurs in the cathode: Cox + e− → Cred ,
(2)
in which, in turn, Cox corresponds to the oxidized form of a site or species in the cathode, while Cred is the reduced site or species in the cathode. Many oxidation and/or reduction reactions are also accompanied by the transfer of atoms or molecules. Batteries and fuel cells operate according to the same fundamental principle. In other words, under appropriate conditions, the chemical free energy associated with a particular reaction can be converted into electrical energy, often with extremely high efficiency. Considering that both are electrochemical cells, it is possible to demonstrate that during operation, electrons flow from the anode to the cathode, constituting an electrical current that can be used to drive an external device, e.g., see Figs. 3.3 and 3.5. The fuel is an inherent part of the battery; a battery, in other words, carries its fuel around with it, whereas fuel must be supplied to a fuel cell from an external source. Unlike a battery, a fuel cell cannot become depleted and so long as fuels are supplied it will generate electricity. Recharging problems are therefore peculiar to batteries [107]. These systems can therefore be understood in terms of parts, since the overall chemical reactions can be broken down into components of oxidation and reduction reactions, the former involving the transfer of electrons from one set of reactants to the anode and the latter involving the transfer of electrons from the cathode to a
CHARGE
Power supply
e−
Load
O DISCHARGE
Co
ELECTROLYTE
Li Carbon
CATHODE
ANODE
Li1-xCoO2
Graphite
Fig. 3 Schematic of a rechargeable lithium battery in discharge/charge mode. The lithium ion is intercalated in the anode during charging and in the cathodes during discharging. The layered host lattice in the cathode and anode is also illustrated, considering a cathode composed of a lithium cobalt host and an anode composed of a crystalline structure of hexagonal graphite. See Color Plates
Electrochemistry, Nanomaterials, and Nanostructures
97
second set of reactants. The overall electrochemical device may be set up in such a way that electron-transfer reactions are rapid and, ideally, completely reversible in chemical terms [6].
3.1 Lithium Ion Batteries Lithium-ion rechargeable battery solid state devices rank high among the alternative energy devices in which nanostructured cathodes or anodes make a dramatic difference in improving rate capabilities [79, 81, 82, 86, 107, 113–117]. Despite its low density (0.53 g cm−3 ), low electronegativity and high electron/atom mass ratio, lithium is the preferred choice for the active element of the anode, whose discharge functions as an electron donor can be expressed as: discharge
xLi
−−−−−→ charge
−−−−−→
xLi+ (electrolyte) + xe− ,
(3)
where Li+ enters the electrolyte, and the electron exits the anode, moving to the external circuit to power the load. Other types of materials containing lithium (lithiated host materials) are also used as anodes [118–120]. The most classic example is lithiated carbon (Lix C6 ). The anode reaction for this type of material is as follows: discharge
Lix C
−−−−−→ charge
−−−−−→
C + xLi+ (electrolyte) + xe− .
(4)
The carbon host materials that have been studied include natural and synthetic graphites, carbon fibers, and mesocarbons, all of which differ in degree of crystallization and stacking order, but all of which have the characteristic structural feature of graphite, namely, planar layers of carbon atoms forming fused sixmembered rings and separated by intercalate layers, supplying an electrochemical potential close to that of metallic lithium electrodes [121]. The large number of boundaries resulting from the use of graphite nanostructures has proved useful for improving lithium intercalation capacity [102, 107, 121]. Indeed, the interfacial boundary area can accommodate lithium to form Lix C with x > 1, and hence, an increased reversible capacity [102, 121]. The following reaction generally takes place at the cathode: discharge
xLi+ (electrolyte) + xe− + MO2 −−−−−→ Lix MO2 ,
(5)
which clearly indicates that to operate effectively, Lix MO2 (which represents a lithiated transition-metal oxide usually applied in commercial cells) must conduct electronically, or at least be miscible with, an appropriate inert conducting ionic– electronic nanocomposite, in which the diffusion of Li ions must be reasonably
98
P.R. Bueno and C. Gabrielli
facile and, ideally, highly reversible to enable the battery to be rechargeable. The latter requirement suggests that layered structures, which allow Li+ ions to diffuse easily throughout the bulk of the crystal, are likely the most effective structure. In the cathode, Lix MO2 is usually mixed with carbon black to raise the electronic conductivity. Lithium cobalt and nickel oxides are commonly used as cathodes (Li1−y CoO2 and Li1−y NiO2 ), since these oxides possess the transition metal in a highly oxidized state, allowing a high cell voltage to be developed. Considering the lithium cobalt oxide, one may have discharge
xLi+ (electrolyte) + xe− + LiCoO2 −−−−−→ Li1+x CoO2 .
(6)
Therefore, in the cathode, Li+ ions engage in an electron-transfer reaction that decreases the chemical potential of lithium in relation to its value in the anode and calls for the compensating electron. Upon discharge, the cathode functions as an electron acceptor and the previous reaction (6) can be expressed alternatively as follows: cathode (7) xCo4+ + xe− −−−−→ xCo3+ . If the battery is to be rechargeable, the reactions must be reversible. The importance of lithiated transition-metal oxides (Lix MO2 ) is that they are capable of accommodating large quantities of lithium per formula unit and have low relative molecular masses, giving rise to high power and energy densities. Materials for cathodes and anodes (insertion electrodes) for rechargeable lithium batteries are called intercalation compounds and constitute a special class of electroactive material [122]. The intercalation refers to the reversible insertion of mobile guest species into a crystalline host lattice, which contains an interconnected system of empty lattice sites of appropriate size, while the structural integrity of the host lattice is formally conserved [122]. Considering electrodes composed of nanoscale electroactive materials, high energy density and high power density (the same as rate capabilities) can be achieved simultaneously. This requires a large electrode–electrolyte interfacial area coupled with short diffusion distances within the electrodes themselves [10–13, 86, 113, 118–120]. Nanoscale materials for lithium ion storage devices are emerging as a successful solution for improving the rate capability [86, 113, 123–125]. A battery’s rate capability is its ability to deliver a large capacity when discharged at high C rates (a rate of C/1 corresponds to the current required to completely discharge an electrode in 1 h). During high-power pulses required for transmission of digitized and compressed voice data, the battery’s delivery capacity decreases to a fraction of its low rate value. It is widely believed that these limitations in the rate capabilities of Li ion batteries are caused by slow solid-state diffusion of Li+ within the electrode materials. For this reason, tremendous interest currently focuses on the research and development of nanostructured Li ion battery electrodes, whose nanostructure clearly restricts the distance that Li+ must diffuse, which may be as small as 50 nm [10–13,86,113,118–120]. Two kinds of geometry are commonly applied to achieve a faster solid-state diffusion, as depicted in Fig. 4. The first geometry is based on
Electrochemistry, Nanomaterials, and Nanostructures
99
a
<100 nm
<100 nm 0
L
b
Fig. 4 Schematic of a highly porous nanostructured electrode protruding from a current collector. a Nanofiber structure or a template-like membrane, and b spherical-like particle-based nanostructure. Note that real nanostructures are not so regular, but both nanostructured phase and electrolyte, as discussed herein, are continuous along the length L [113]. The length L determines if the nanostructured electrode will be considered 2-D or 3-D and is very important in modeling electronic and ionic transport in the nanostructured electrode [86, 113]
connected spherical-like nanoparticles while the second is based on nanofibers that protrude, brushlike, from the current collector; in fact, this type of nanostructured electrode geometry allows for improved rate capabilities. The use of nanostructured materials for batteries is not restricted to lithium ion batteries. Nickel and metal hybrid nanocrystalline materials have also been developed, and nanostructured materials offer improvements in terms of power density and durability by controlling the charge diffusion and oxidation state on a nanoscale level. All the electrochemical cell devices discussed in this section are based on 2-D electrode configurations in which electrodes can be assembled from 0-D or 1-D nanostructures (see Figs. 2 and 4). In other words, commercial lithium ion batteries are based on a layer-by-layer construction of the cell, whether or not the layers are based on nanoscale materials. The use of novel nanoscale materials will offer improvements in gravimetric and volumetric energy densities (W h g−1 and W h L−1 , respectively), but the same configurations will prevail. Furthermore, cells designed in 3-D nanostructures are also emerging as a new possibility for specific applications in the category of lithium ion batteries, i.e., as batteries to power microelectromechanical systems, or MEMS. Thus, thin-film batteries, despite their excellent energy
100
P.R. Bueno and C. Gabrielli
per unit volume, fall far short of being able to power a smart dust mote for 1 day, and the consequences of the 2-D nature of thin-film batteries are easily overlooked. Three-dimensional configurations offer a means to keep transport distances short and yet provide enough material so that the batteries are able to power MEMS devices for extended periods of time [85, 126]. It is important to stress that 3-D cells are different from the 3-D electrodes concept. Examples of prospective 3-D cell architectures for charge-insertion batteries are (a) array of interdigitated cylindrical cathodes and anodes, (b) interdigitated plate array of cathodes and anodes, (c) rod array of cylindrical anodes coated with a thin layer of ion-conducting dielectric (electrolyte) with the remaining free volume filled with the cathode material, (d) aperiodic sponge architectures in which the solid network of the sponge serves as the charge insertion cathode, which is coated with an ultrathin layer of ion-conducting dielectric (electrolyte), and the remaining free volume is filled with an interpenetrating, continuous anode [85, 126].
3.2 Fuel Cells As mentioned earlier, the fuel cell is a particular type of galvanic cell, as briefly described later. There are high-temperature and low-temperature fuel cells [11, 35, 109, 127]. Here, we will simply describe two common types of fuel cell to illustrate their main principles of operation. At sufficiently high temperatures it is possible to use solid ceramic-oxide ion conductors that have very high conductivities exceeding 900◦ C. The typical electrolyte used is ZrO2 with 8–10 mol% of Y2 O3 , which is particularly O2− ion-conducting with a minimum of electronic conductivity. Electrolyte for this kind of fuel cell must exhibit good chemical stability with respect to the electrodes and inlet gases; it must have a high density to inhibit the crossover of fuel, and its thermal expansion must be compatible with other components. Anode and cathode must be porous to physically offer low resistance to the transport of fuel. The anode requirements are that it must be an effective oxidation catalyst, have high electronic conductivity, and be stable in the reducing environment. For this kind of cell, the material traditionally used as anode is 35% Ni − ZrO2 /Y2 O3 cermet, i.e., a well-mixed combination of ceramic and metal. The anode reaction is as follows: H2 + O2− −−−→ H2 O + 2e− . anode
(8)
The cathode must also display good electrocatalyst activity for the reduction of O2 and offer good electronic conductivity, since it must serve as the current collector. The cathode material most commonly used is porous or mesoporous perovskite manganite with the formula La1−x Srx MnO3 (0.10 < x < 0.15). The cathode reaction is as follows: 1 cathode O2 + 2e− −−−−→ O2− . (9) 2
Electrochemistry, Nanomaterials, and Nanostructures
b
Load
a
101 Load
H2
O2
H2
O2
H2
H2 O
H2 O
O2
ANODE
diffusion path
H
CATHODE
O
ANODE
O2-
+
H
CATHODE diffusion path
e−
Fig. 5 Schematic cross section of the simplified planar anode–electrode–cathode structure of two typical fuel cells: a polymer-electrolyte membrane fuel cell and b solid oxide fuel cell. See Color Plates
Cells that operate using the aforementioned cathode, anode, and electrolyte are called solid-oxide fuel cells (SOFC) (see Fig. 3.5b for a schematic representation of the operation of such cells). Another important fuel cell that can be built in analogy to the solid oxide-based fuel cell is based on solid proton conductors. This