Tellurium in Organic Synthesis Second, Updated and Enlarged Edition
BEST SYNTHETIC METHODS Petragnani and Stefani: Tellurium in Organic Synthesis: Second, Updated and Enlarged Edition, 2007 Other Volumes in the Series Brandsma: Synthesis of Acetylenes, Allenes and Cumulenes: Methods and Techniques, 2004 Osborn: Carbohydrates, 2003 Jones: Quaternary Ammonium Salts: Their Use in Phase-Transfer Catalysed Reactions, 2001 Varvoglis: Hypervalent Iodine in Organic Synthesis, 1997 Grimmett: Imidazole and Benzimidazole Synthesis, 1997 Wakefield: Organomagnesium Methods in Organic Synthesis, 1995 Metzner: Sulfur Reagents in Organic Synthesis, 1994 Pearson: Iron Compounds in Organic Synthesis, 1994 Petragnani: Tellurium in Organic Synthesis, 1994 Motherwell: Free Radical Chain Reactions in Organic Synthesis, 1991
Related Titles of Interest Books Cordell: The Alkaloids Levy & Tang: Chemistry of C-Glycosides Pietra: Biodiversity and Natural Product Diversity Rahman: Studies in Natural Product Chemistry Sturgeon: Advances in Macromolecular Carbohydrate Research Major Reference Works Barton, Nakanishi & Meth-Cohn: Comprehensive Natural Products Chemistry Katritzky, Meth-Cohn & Rees: Comprehensive Organic Functional Group Transformations Katritzky, Rees & Scriven: Comprehensive Heterocyclic Chemistry II Sainsbury: Rodd’s Chemistry of Carbon Compounds Journals Bioorganic and Medicinal Chemistry Bioorganic and Medicinal Chemistry Letters Carbohydrate Research Heterocycles (distributed by Elsevier) Journal of Supramolecular Chemistry Phytochemistry Tetrahedron Tetrahedron: Asymmetry Tetrahedron Letters
Tellurium in Organic Synthesis Second, Updated and Enlarged Edition
Nicola Petragnani Instituto de Química Universidade de São Paulo, São Paulo SP - Brasil
Hélio A. Stefani Faculdade de Ciências Farmacêuticas Departamento de Farmácia Universidade de São Paulo, São Paulo SP - Brasil
Amsterdam ● Boston ● Heidelberg ● London ● New York ● Oxford ● Paris San Diego ● San Francisco ● Singapore ● Sydney ● Tokyo
Academic Press is an imprint of Elsevier 84 Theobald’s Road, London WC1X 8RR, UK Radarweg 29, PO Box 211, 1000 AE Amsterdam, The Netherlands The Boulevard, Langford Lane, Kidlington, Oxford OX5 1GB, UK 30 Corporate Drive, Suite 400, Burlington, MA 01803, USA 525 B Street, Suite 1900, San Diego, CA 92101-4495, USA First edition 2007 Copyright © 2007 Elsevier Ltd. All rights reserved No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, mechanical, photocopying, recording or otherwise without the prior written permission of the publisher Permissions may be sought directly from Elsevier’s Science & Technology Rights Department in Oxford, UK: phone (+44) (0) 1865 843830; fax (+44) (0) 1865 853333; email:
[email protected]. Alternatively you can submit your request online by visiting the Elsevier web site at http://elsevier.com/locate/permissions, and selecting Obtaining permission to use Elsevier material Notice No responsibility is assumed by the publisher for any injury and/or damage to persons or property as a matter of products liability, negligence or otherwise, or from any use or operation of any methods, products, instructions or ideas contained in the material herein. Because of rapid advances in the medical sciences, in particular, independent verification of diagnoses and drug dosages should be made ISBN-13: 978-0-08-045310-1 ISBN-10: 0-08-045310-4 ISSN: 1478-9914 For information on all Academic Press publications visit our website at books.elsevier.com
Printed and bound in The Netherlands 07 08 09 10 11 10 9 8 7 6 5 4 3 2 1
Foreword There is a vast and often bewildering array of synthetic methods and reagents available to organic chemists today. Many chemists have their own favoured methods, old and new, for standard transformations, and these can vary considerably from one laboratory to another. New and unfamiliar methods may well allow a particular synthetic step to be done more readily and in higher yield, but there is always some energy barrier associated with their use for the first time. Furthermore, the very wealth of possibilities creates an informationretrieval problem. How can we choose between all the alternatives, and what are their real advantages and limitations? Where can we find the precise experimental details, so often taken for granted by the experts? There is therefore a constant demand for books on synthetic methods, especially the more practical ones like Organic Syntheses, Organic Reactions and Reagents for Organic Synthesis, which are found in most chemistry laboratories. We are convinced that there is a further need, still largely unfulfilled, for a uniform series of books, each dealing concisely with a particular topic from a practical point of view – a need, that is, for books full of preparations, practical hints and detailed examples, all critically assessed, and giving just the information needed to smooth our way painlessly into the unfamiliar territory. Such books would obviously be a great help to research students as well as to established organic chemists. We have been very fortunate with the highly experienced and expert organic chemists, who, agreeing with our objective, have written the first group of volumes in this series, Best Synthetic Methods. We shall always be pleased to receive comments from readers and suggestions for future volumes. A. R. K., O. M.-C., C. W. R.
v
This page intentionally left blank
Preface (1994 edition) Tellurium is the fourth element of the VIA family of the periodic table, which starts with oxygen. Since tellurium exhibits an electronic configuration similar to that of selenium and sulphur, the chemical behaviour of these elements is obviously closely related. This similarity was a hindrance to the greater development of tellurium chemistry. During several decades, research was restricted to an extrapolation of well-established reactions for the preparation and use of organic sulphur compounds to selenium, and mainly from selenium to tellurium. Although over a quarter of a century ago it would not have been predicted that the importance of the VIA family of the periodic table would exceed that of its second element, sulphur, the development of organoselenium chemistry has been so explosive that little comment is necessary, as illustrated by the impressive number of papers as well as by several books1–3 on the field. Tellurium compounds have taken an even longer time to rise from being considered an exotic and perverse element to a useful tool in organic chemistry. In the mid-1950s, the German chemist Heinrich Rheinboldt reviewed the preparation and reactivity of the organic tellurium compounds by comparison with selenium analogues in Houben-Weyl-Methoden der Organischen Chemie, Vol. IX (1955). During the following years, two books and several review articles were published on the organic chemistry of tellurium, but these were still within the areas of preparation and reactivity. It was in 1971 that the first “Symposium on the Selenium and Tellurium Chemistry” took place, and since then symposia have been held every 4 years. In the last few years tellurium compounds have begun to be employed in organic synthesis, giving rise to a significant number of publications and to several review articles. Finally, in 1990, a Houben-Weyl volume of more than 1000 pages was published covering all aspects of tellurium chemistry (author, K.Y. Irgolic). At present the author feels that the remarkable development attained by the organotellurium chemistry is a clear reason for a monograph from the point of view of the organic chemist. The aim of this monograph is to provide a comprehensive overview of the preparation and synthetic applications of tellurium compounds. It will focus on the preparation of selected inorganic tellurium compounds and on the main classes of organotellurium compounds. The major interest of the volume probably resides in the use of these inorganic and organic compounds as reagents in organic syntheses as well as the conversion of organotellurium into free organic compounds. In this regard it is sufficient to emphasize that extremely useful reactions achieved with tellurium reagents, such as selective reductions and oxidations of a large variety of organic functionalities, have not been mentioned until now in textbooks specifically devoted to organic synthetic methodology. This monograph is appropriate for chemists who, although not experts in tellurium chemistry, have had a basic grounding to graduate level in organic chemistry and with sufficient experience of typical experimental operations. vii
viii
PREFACE (1994 EDITION)
A considerable number of “experimental procedures” have been included. These have been described in accordance with the original papers, and therefore the reader will find significant differences in the description of these procedures, some rich and others very poor in detail. In the last case, the practitioner who is used to overcoming the usual laboratory difficulties will need to use a certain degree of initiative. The author will feel very gratified if this volume helps some chemists to become familiar with tellurium which up till now they may have considered only as a useless and unpleasant element. N. Petragnani
REFERENCES 1. Klayman, D. L.; Gunther, W. H. H. (eds.). Organic Selenium Compounds: Their Chemistry and Biology. Wiley, New York, 1973. 2. Paulmier, C. Selenium Reagents and Intermediates in Organic Synthesis. Pergamon Press, Oxford, 1986. 3. Liotta, D. (ed.). Organoselenium Chemistry. Wiley, New York, 1987.
Preface Over a decade after the publication of the first edition of this book, it is unnecessary to emphasize once more the remarkable developments attained in organic tellurium chemistry. Almost a thousand papers have been published in this last period, and numerous research groups all over the world have consolidated their international status. Undoubtedly tellurium chemistry can participate in several areas of organic chemistry, as well as in others, and ever-more research chemists introduce tellurium to solve a wide variety of problems. All this seems to us to be a good reason to write this new edition of the book. It does not differ in its general approach from the first one. Obviously it is not a compendium covering exhaustively all the aspects of organic tellurium chemistry. For this purpose the Irgolic E12b volume of Houben-Weyl is yet incomparable although 16 years old. This book was devised in accordance with the intention of the Academic Press series “Best Synthetic Methods” of the first edition, which is clearly focused in the foreword and in the preface. Several chapters such as vinylic tellurides, transmetallation reactions, coupling reactions and free-radical chemistry have been enriched and brought up to date with new information related to their increased involvement in the most varied synthetic manipulations. A chapter has been dedicated to heterocyclic compounds, covering the preparation and reactivity of the most familiar members of the class. Toxicology and pharmacology have also been briefly considered, and we are greatly indebted with C. R. Nogueira, G. Zeni and J. B. T. Rocha for allowing us to use their recent review (Chem. Rev. 2004, 104, 6255) as a source for our new chapter. Probably some contributions have escaped our judgement and not been introduced in this book. We apologize to any authors for the omission. We would be gratified if this new edition, with its broad level of information, can disclose basic knowledge to the beginner in tellurium chemistry as well as furnish salient features for opening new perspectives to advanced researchers. Nicola Petragnani and Hélio A. Stefani
ix
This page intentionally left blank
Contents Foreword. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
v
Preface (1994 edition) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
vii
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ix
Detailed Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
xiii
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
xxv
Chapter 1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
Chapter 2
Preparation of the More Important Inorganic Tellurium Reagents . . . .
3
Chapter 3
Preparation of the Principal Classes of Organic Tellurium Compounds
9
Chapter 4 Tellurium in Organic Synthesis. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
115
Chapter 5
Telluroheterocycles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
285
Chapter 6 Toxicology of Organotellurium Compounds . . . . . . . . . . . . . . . . . . . .
329
Chapter 7 Pharmacology of Organotellurium Compounds. . . . . . . . . . . . . . . . . .
331
Chapter 8
Miscellaneous. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
337
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
345
xi
This page intentionally left blank
Detailed Contents 1
Introduction 1.1. 1.2.
2
1 1
Preparation of the More Important Inorganic Tellurium Reagents 2.1. 2.2. 2.3.
2.4.
2.5. 2.6.
3
Some physical properties of tellurium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Relevant monographs and review articles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tellurium tetrachloride . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tellurium dioxide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Alkali metal tellurides (Te2⫺Cat2⫹) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3.1. From the elements (2Na ⫹ Te→Na2Te) . . . . . . . . . . . . . . . . . . . . . . . . 2.3.2. From tellurium and reducing agents (Te→Te2⫺) . . . . . . . . . . . . . . . . . 2.3.3. From tellurium and non-reducing bases . . . . . . . . . . . . . . . . . . . . . . . . Alkali metal ditellurides (Na2Te2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4.1. From the elements (2Na⫹2Te→Na2Te2) . . . . . . . . . . . . . . . . . . . . . . . red 2.4.2. From tellurium and reducing agents (2Te→Te22⫺) . . . . . . . . . . . . . . . . Hydrogen telluride (H2Te) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sodium hydrogen telluride (NaHTe) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 4 5 5 5 5 6 6 6 6 6
Preparation of the Principal Classes of Organic Tellurium Compounds 3.1.
Diorganyl tellurides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1.1. Symmetrical dialkyl tellurides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1.1.1. From alkali tellurides and alkylating agents . . . . . . . . . . . . 3.1.1.2. From bis(triphenylstannyl) telluride and alkylating reagents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1.2. Symmetrical diaryl tellurides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1.2.1. From sodium telluride and non-activated aryl halides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1.2.2. From sodium telluride or sodium O,O-diethyl phosphorotellurolate and arenediazonium fluoroborates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1.2.3. From potassium tellurocyanate and arenediazonium fluoroborates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1.2.4. From tellurium(IV) halides and arylmagnesium halides . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1.2.5. From elemental tellurium and diarylmercury compounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1.2.6. From diaryl ditellurides by extrusion of a tellurium atom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1.2.7. Bis-(phenylethynyl) telluride as Te2⫹ equivalent . . . . . . . . . 3.1.3. Unsymmetrical tellurides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1.3.1. From sodium telluride and two different alkyl halides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
xiii
13 13 13 17 18 18
20 21 21 22 22 23 24 24
xiv
DETAILED CONTENTS 3.1.3.2. 3.1.3.3.
3.2.
3.3. 3.4. 3.5.
3.6. 3.7. 3.8. 3.9.
From organyl tellurolates and alkylating agents . . . . . . . . . By addition of aryl tellurolates to electrophilic alkenes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1.3.4. From organyl tellurolates and arylating agents . . . . . . . . . . 3.1.3.5. From diorganyl ditellurides or arenetellurenyl halides and organometallic reagents . . . . . . . . . . . . . . . . . . 3.1.3.6. Additional methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1.4. Diorganyl tellurides by reduction of diorganyltellurium dihalides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1.5. Additional methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Diorganyl ditellurides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2.1. From sodium ditelluride . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2.1.1. From sodium ditelluride and alkylating agents . . . . . . . . . . 3.2.1.2. From sodium ditelluride and aryl halides . . . . . . . . . . . . . . 3.2.2. By oxidation of organotellurols or organotellurolates . . . . . . . . . . . . . . 3.2.3. By reduction of organotellurium trichlorides . . . . . . . . . . . . . . . . . . . . 3.2.3.1. Reduction of β-carboxyalkyltellurium trichlorides . . . . . . . 3.2.3.2. Reduction of β-alkoxyalkyltellurium trichlorides . . . . . . . . 3.2.3.3. Reduction of aryltellurium trichlorides . . . . . . . . . . . . . . . . 3.2.4. Diaryl ditellurides from aryl boronic acids . . . . . . . . . . . . . . . . . . . . . Organyl tellurols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bis-organyl telluromethanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Organyltellurium trihalides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5.1. Organyltellurium trichlorides from tellurium tetrachloride and organic substrates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5.1.1. From tellurium tetrachloride and ketones and carboxylic anhydrides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5.1.2. From tellurium tetrachloride and alkenes . . . . . . . . . . . . . . 3.5.1.3. From tellurium tetrachloride and arenes . . . . . . . . . . . . . . . 3.5.1.4. From tellurium tetrachloride and arylmercury chlorides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5.2. By chlorinolysis of diorganyl ditellurides . . . . . . . . . . . . . . . . . . . . . . 3.5.3. Organyltellurium tribromides and triiodides by halogenolysis of the corresponding ditellurides . . . . . . . . . . . . . . . . . . 3.5.4. Additional method: preparation of organyltellurium trichlorides and tribromides by the reaction of tetraorganyltin compounds with tellurium tetrachloride and tetrabromide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The products of the hydrolysis of aryltellurium trihalides . . . . . . . . . . . . . . . . . . Aryltellurenyl halides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aryl tellurenyl pseudohalides: aryl tellurocyanates . . . . . . . . . . . . . . . . . . . . . . . Diorganyl tellurium dihalides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.9.1. From elemental tellurium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.9.2. From tellurium tetrahalides (or tellurium dioxides) . . . . . . . . . . . . . . . 3.9.2.1. With ketones and carboxylic acid anhydrides . . . . . . . . . . . 3.9.2.2. With alkenes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.9.2.3. With arenes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.9.2.4. With arylmercury chlorides . . . . . . . . . . . . . . . . . . . . . . . . . 3.9.2.5. With arenediazonium salts . . . . . . . . . . . . . . . . . . . . . . . . .
25 30 30 31 32 35 36 37 37 37 39 40 42 42 43 43 44 45 46 47 47 47 48 49 50 51 51
52 53 55 56 57 57 57 57 58 58 58 59
DETAILED CONTENTS 3.9.3.
3.10.
3.11. 3.12. 3.13. 3.14. 3.15. 3.16.
From organyltellurium trihalides . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.9.3.1. With ketones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.9.3.2. With alkenes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.9.3.3. With arenes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.9.3.4. With organylmercury chlorides . . . . . . . . . . . . . . . . . . . . 3.9.4. By addition of halogens to diorganyl tellurides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.9.5. Additional methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.9.5.1. Reaction of elemental tellurium with arenediazonium salts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.9.5.2. Reaction of TeO2/LiCl with aryl hydrazines . . . . . . . . . . . 3.9.5.3. Reaction of diaryl ditelluride with arenediazonium salts/CuX2 . . . . . . . . . . . . . . . . . . . . . . . Diorganyl telluroxides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.10.1. Hydrolysis of diaryltellurium dihalides . . . . . . . . . . . . . . . . . . . . . . . 3.10.2. Oxidation of diaryl tellurides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Telluroesters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aryl telluroformates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Telluroglucopyranosides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Water-soluble diorganyl tellurides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dihaloaryltelluro cyclopropanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vinylic tellurides and ditellurides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.16.1. Starting from nucleophilic tellurium . . . . . . . . . . . . . . . . . . . . . . . . . 3.16.1.1. Addition of alkali tellurides to acetylenes . . . . . . . . . . . . 3.16.1.2. From organyl tellurols or tellurolates and terminal acetylenes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.16.1.3. From organyl tellurolate (and telluride) anions and vinyl bromides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.16.1.4. From vinylic tellurolate anions and alkyl halides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.16.1.5. From organotellurolate anions and activated vinylic halides . . . . . . . . . . . . . . . . . . . . . . . . . . 3.16.1.6. From organyl tellurolates and electrophilic acetylenes . . . . . . . . . . . . . . . . . . . . . . . . . . 3.16.1.7. Tanden vicinal difunctionalization of alkynes . . . . . . . . . . 3.16.1.8. Telluroacylation of terminal alkynes . . . . . . . . . . . . . . . . 3.16.2. Starting from electrophilic tellurium . . . . . . . . . . . . . . . . . . . . . . . . . 3.16.2.1. By addition of tellurium tetrahalides and aryltellurium trihalides to acetylenes . . . . . . . . . . . . . . . . 3.16.2.2. From organyltellurenyl halides and vinylic Grignard reagents . . . . . . . . . . . . . . . . . . . . . . . . . 3.16.2.3. From vinyltellurenyl iodides and Grignard reagents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.16.3. Via radical reactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.16.4. Reduction of acetylenic tellurides . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.16.5. Vinylic tellurides via olefination reactions . . . . . . . . . . . . . . . . . . . . . 3.16.5.1. Horner-Emmons route . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.16.5.2. Wittig route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.16.6. Vinylic tellurides via borane chemistry . . . . . . . . . . . . . . . . . . . . . . .
xv 59 60 60 61 62 62 63 63 63 63 65 65 65 66 68 70 70 70 71 71 71 73 78 79 80 82 83 84 84 84 86 87 87 89 89 89 91 93
xvi
DETAILED CONTENTS 3.16.7. Telluro (seleno)ketene acetals, 1-seleno-2-telluro-ethenes, telluro ketene acetals, telluro (stannyl)ketene acetals and telluro(thio)ketene acetals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.16.8. The behaviour of vinylic tellurides towards several reagents and reaction conditions used in organic synthesis . . . . . . . . . . . . . . . 3.17. Acetylenic tellurides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.17.1. From nucleophilic tellurium reagents . . . . . . . . . . . . . . . . . . . . . . . . 3.17.1.1. Sodium ethynyl tellurolates . . . . . . . . . . . . . . . . . . . . . . . 3.17.1.2. Lithium alkyl and ethynyl tellurolates . . . . . . . . . . . . . . . 3.17.2. From electrophilic tellurium reagents . . . . . . . . . . . . . . . . . . . . . . . . 3.17.2.1. From alkynyl Grignard and lithium compounds and organyl tellurenyl halides . . . . . . . . . . . . 3.17.2.2. From tellurium tetrachloride and alkynyllithium compounds . . . . . . . . . . . . . . . . . . . . . . . . 3.17.3. Synthesis of internal acetylenes from vinylic tellurides . . . . . . . . . . . 3.18. Allenic and propargylic tellurides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
94 103 107 107 107 107 108 108 110 111 111
Tellurium in Organic Synthesis 4.1.
Reductions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.1. Reduction of carbonyl compounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.1.1. With hydrogen telluride . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.1.2. With phenyltellurol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.1.3. With diisobutyl telluride/titanium(IV) chloride . . . . . . . . . . 4.1.1.4. With sodium telluride in 1-methyl-2-pyrrolidinone . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.2. Selective reduction of α,β-unsaturated carbonyl compounds . . . . . . . . 4.1.3. Reduction of conjugated arylalkenes and arylalkynes . . . . . . . . . . . . . 4.1.4. Reduction of imines and enamines . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.5. Reductive desulphuration of aromatic thioketones . . . . . . . . . . . . . . . . 4.1.6. Reduction of nitro compounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.7. Reduction of other nitrogenated compounds . . . . . . . . . . . . . . . . . . . . 4.1.8. Deselenylation of α-seleno carboxylic compounds . . . . . . . . . . . . . . . 4.1.9. Deoxygenation of oxiranes with alkali O,O-dialkyl phosphorotellurolates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.10. Reductive opening of oxiranes with sodium hydrogen telluride and sodium telluride . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.11. Correlate reaction: tellurium-mediated resolution of racemic allyl alcohols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.12. 1,2-Elimination in vicinal disubstituted substrates . . . . . . . . . . . . . . . . 4.1.12.1. Debromination of vic-dibromides with tellurium reagents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.12.2. Desulphonation of vic-dimesylates and vic-ditosylates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.13. Reductive fission of carbon–heteroatom bonds . . . . . . . . . . . . . . . . . . 4.1.13.1. Reductive removal of electronegative α-substituents from ketones, acids and derivatives . . . . . . . 4.1.13.2. Dehalogenation of polyhalogenated organic compounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
115 115 115 116 117 117 118 119 120 121 121 125 127 128 129 130 132 132 136 137 137 140
DETAILED CONTENTS
4.2.
4.3.
4.4.
4.1.13.3. Reductive removal of tertiary nitro groups . . . . . . . . . . . . . 4.1.13.4. Reductive dealkylation of quaternary ammonium salts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.13.5. Reductive desulphonation of β-ketosulphones . . . . . . . . . . 4.1.13.6. Desulphonylative condensation of β-cyanosulphones with aldehydes . . . . . . . . . . . . . . . . . . . . 4.1.13.7. Correlate reaction – desulphonylation of α-nitrosulphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.13.8. Monodesulphuration of diaryl thioketals and bis-sulphenylated β-dicarboxyl compounds, diorganyl trisulphides and disulphides . . . . . . . . . . . . . . . . Tellurium-mediated formation of anionic species and their reactions with electrophiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2.1. Reformatsky-type reactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2.2. Knoevenagel-type reaction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2.3. Pinacol reaction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2.4. Alkylidenation of aldehydes and cyclopropanation of α,β-unsaturated carbonyl compounds with dibromomalonic esters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2.5. Telluride-assisted sulphenylation and sulphonylation reactions . . . . . . 4.2.6. Telluride-mediated aldehyde methylenation . . . . . . . . . . . . . . . . . . . . . 4.2.7. Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Deprotection of organic functionality by tellurium reagents . . . . . . . . . . . . . . . . 4.3.1. Regeneration of carboxylic acids: cleavage of carboxylic esters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3.1.1. Alkyl carboxylates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3.1.2. Phenacyl carboxylates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3.1.3. Allyl carboxylates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3.1.4. 2-Haloethyl carboxylates . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3.2. Regeneration of phenols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3.2.1. Cleavage of aryl carboxylates and carbonates . . . . . . . . . . . 4.3.2.2. Cleavage of aryl haloacetates . . . . . . . . . . . . . . . . . . . . . . . 4.3.2.3. Cleavage of phenyl allyl ethers . . . . . . . . . . . . . . . . . . . . . . 4.3.3. Regeneration of amines by cleavage of trichloro-t-butylcarbamates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Oxidation of organic substances by means of tellurium reagents . . . . . . . . . . . . 4.4.1. Bis(p-methoxyphenyl) telluroxides as a mild and selective oxidizing reagent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.4.1.1. Conversion of thio- and selenocarbonyl compounds into their oxo analogues . . . . . . . . . . . . . . . . . . 4.4.1.2. Conversion of tertiary phosphines into tertiary phosphine oxides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.4.1.3. Conversion of phenyl isothiocyanate into diphenylurea . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.4.1.4. Conversion of thiourea into ureas . . . . . . . . . . . . . . . . . . . . 4.4.1.5. Conversion of thiols into disulphides . . . . . . . . . . . . . . . . . 4.4.1.6. Conversion of o- and p-diphenols into quinones . . . . . . . . . 4.4.1.7. Conversion of acylhydrazines into acylhydrazides . . . . . . .
xvii 141 142 142 143 144
144 147 147 149 150
150 151 153 154 155 155 155 157 157 158 159 159 160 160 161 162 162 162 164 164 164 164 165 165
xviii
DETAILED CONTENTS 4.4.1.8.
4.5.
4.6.
Conversion of N-phenylhydroxylamine into nitrosobenzene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.4.1.9. Conversion of benzophenone hydrazone into diphenyldiazomethane . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.4.2. Polymer-supported bis(p-methoxyphenyl) telluroxide . . . . . . . . . . . . . 4.4.3. Bis(p-methoxyphenyl) telluride as a mediator in an electrolytic process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.4.4. Bis(p-methoxyphenyl) tellurone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.4.5. Sodium tellurite as oxidizing agent for thiols . . . . . . . . . . . . . . . . . . . . 4.4.6. TeCl4-promoted oxidation of trialkylphosphites . . . . . . . . . . . . . . . . . . 4.4.7. Arenetellurinic anhydrides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.4.8. Reaction of oxidizing tellurium reagents with the C⫽C bond . . . . . . . 4.4.8.1. Epoxidation of olefins catalysed by polystyrene-supported tellurinic acid . . . . . . . . . . . . . . . . . 4.4.8.2. Diacetoxylation of olefins . . . . . . . . . . . . . . . . . . . . . . . . . . 4.4.8.3. Methoxytellurenylation and dimethoxylation of olefins . . . . . . . . . . . . . . . . . . . . . . . . . 4.4.8.4. Aminotellurinylation of olefins and related reactions . . . . . Organotellurium-based ring closure reactions . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5.1. Tellurolactonization of unsaturated carboxylic acids . . . . . . . . . . . . . . 4.5.1.1. With aryltellurium trichlorides . . . . . . . . . . . . . . . . . . . . . . 4.5.1.2. With benzenetellurenyl nitrobenzenesulphonate . . . . . . . . . 4.5.1.3. With diaryl tellurium dihalides . . . . . . . . . . . . . . . . . . . . . . 4.5.1.4. Tellurolactonization of α-allenic acids with phenyltellurenyl chloride . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5.1.5. Reductive detelluration of tellurolactones . . . . . . . . . . . . . . 4.5.2. Cyclotelluroetherification of unsaturated alcohols and allylphenols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5.2.1. With aryltellurinyl acetates . . . . . . . . . . . . . . . . . . . . . . . . . 4.5.2.2. With aryltellurium trichlorides . . . . . . . . . . . . . . . . . . . . . . 4.5.2.3. With benzenetellurenyl nitrobenzenesulphonate . . . . . . . . . 4.5.2.4. With TeO2/HOAc/LiCl or TeO2/HCl . . . . . . . . . . . . . . . . . . 4.5.2.5. With diaryl tellurium dihalides . . . . . . . . . . . . . . . . . . . . . . 4.5.2.6. Synthetic utility of the telluroetherification reactions . . . . . 4.5.3. Tellurocyclofunctionalization of alkenyl-substituted β-dicarbonyl compounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5.4. Tellurocyclization of olefinic carbamates . . . . . . . . . . . . . . . . . . . . . . . Conversion of organotellurium compounds into tellurium-free organic compounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6.1. Detelluration of organotellurium compounds with the formation of new C–C bonds (carbodetelluration) . . . . . . . . . 4.6.1.1. Synthesis of biaryls by Raney Ni-catalysed homocoupling of diaryltellurium dichlorides and aryltellurium trichlorides . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6.1.2. Pd(0)-catalysed homocoupling of diorganyl tellurides (and ditellurides) . . . . . . . . . . . . . . . . . . . . . . . . . 4.6.1.3. Correlate reactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6.1.4. Olefin arylation by Pd(II)-catalysed carbodetelluration of aryltellurium compounds . . . . . . . . . . . . . . . . . . . . . . . .
165 165 166 167 168 169 170 171 174 174 174 178 179 183 183 183 184 185 185 185 187 187 188 189 190 191 191 192 193 195 195
195 195 196 196
DETAILED CONTENTS 4.6.1.5.
4.7.
4.8.
4.9.
Pd(II)-catalysed cross-coupling reactions of aryl tellurides with alkenes . . . . . . . . . . . . . . . . . . . . . . . . . 4.6.1.6. Ni(II)- or Co(II)-catalysed cross-coupling of Grignard reagents with organic tellurides . . . . . . . . . . . . . . 4.6.1.7. Palladium- and copper-catalysed cross-coupling of organotellurium dichlorides with organostannanes and organoboronic acids . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6.1.8. Palladium-catalysed cross-coupling of organotellurium compounds with hypervalent iodonium salts . . . . . . . . . . . . 4.6.1.9. Detellurative carbonylation of organotellurium compounds: preparation of carboxylic acids . . . . . . . . . . . . 4.6.1.10. Synthesis of enones and cyclopropanes from bis(oxoalkyl)tellurium dichlorides . . . . . . . . . . . . . . . . . . . 4.6.1.11. Conversion of telluroesters into ketones . . . . . . . . . . . . . . . 4.6.2. Replacement of the tellurium moiety by other functionalities . . . . . . . 4.6.2.1. By amino group – allylic amine by imination of allylic tellurides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6.2.2. By hydroxy group – hydrolysis of telluroesters to carboxylic acids and esters . . . . . . . . . . . . . . . . . . . . . . . . . 4.6.2.3. By halogens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6.2.4. By the methoxy group . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6.2.5. Reductive detelluration of tellurides by triphenyltin hydride . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Synthesis of olefins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.7.1. By telluroxide elimination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.7.2. Correlate method: reaction of alkyl phenyl tellurides with chloramines-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.7.3. From telluronium ylides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.7.3.1. Stabilized telluronium ylides . . . . . . . . . . . . . . . . . . . . . . . 4.7.3.2. Semi-and non-stabilized telluronium ylides . . . . . . . . . . . . 4.7.3.3. Correlate reaction: the reaction of telluronium salts with carbonyl compounds mediated by organolithium reagents – formation of secondary alcohols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.7.4. Tellurium-catalysed decomposition of α-lithiated benzylic sulphones into 1,2-diarylethylenes . . . . . . . . . . . . . . . . . . . . . . . . . . . . Transmetallation reactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8.1. Lithium–tellurium exchange: generation of organolithium reagents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8.2. Acyl- and aroyllithium compounds . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8.3. Heterosubstituted methyllithium compounds . . . . . . . . . . . . . . . . . . . . 4.8.4. Ferrocenyltellurium derivatives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reactivity and synthetic applications of vinylic tellurides . . . . . . . . . . . . . . . . . 4.9.1. Vinylcuprates by copper–tellurium exchange . . . . . . . . . . . . . . . . . . . . 4.9.1.1. Conjugate addition of enones . . . . . . . . . . . . . . . . . . . . . . . 4.9.1.2. Conjugate addition of higher-order cyanocuprates to enone, followed by O-functionalization . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.9.1.3. Reaction with epoxides . . . . . . . . . . . . . . . . . . . . . . . . . . . .
xix
197 198
198 199 199 201 201 202 202 202 203 208 211 213 213 217 218 218 220
225 226 228 228 235 236 238 239 239 239
243 245
xx
DETAILED CONTENTS
4.10.
5
4.9.1.4. Reaction with bromoalkynes . . . . . . . . . . . . . . . . . . . . . . 4.9.1.5. Synthesis of (−)-macrolactin A . . . . . . . . . . . . . . . . . . . . 4.9.2. Tellurium–zinc and tellurium–aluminium exchange . . . . . . . . . . . . 4.9.3. Coupling reactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.9.3.1. Pd(II)-catalysed homocoupling of vinyl tellurides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.9.3.2. Pd(II)-catalysed cross-coupling of vinylic tellurides with alkenes . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.9.3.3. Ni(II)- or Cu(I)-catalysed cross-coupling of vinyl tellurides with Grignard reagents . . . . . . . . . . . . . . . . . . . 4.9.3.4. Pd(II)- and Ni(II)-catalysed Sonogashira-type cross-coupling of vinyl tellurides and vinyl tellurium dichlorides with terminal alkynes . . . . . . . . . . . . . . . . . . 4.9.3.5. Pd/Cu-catalysed cross-coupling of vinylic tellurides with organyl zinc reagents . . . . . . . . . . . . . . . . . . . . . . . . 4.9.3.6. Detellurative carbonylation of vinylic tellurides . . . . . . . . Free radical chemistry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.10.1. Telluride-ion-promoted coupling of allylic halides . . . . . . . . . . . . . 4.10.2. Organyl tellurides as exchangers of carbon radicals . . . . . . . . . . . . 4.10.2.1. Tellurium-mediated addition of carbohydrates to olefins . . . . . . . . . . . . . . . . . . . . . . . . . 4.10.2.2. Intramolecular radical cyclization . . . . . . . . . . . . . . . . . 4.10.3. Reactions of tetraorganyl tellurium with acetylenes . . . . . . . . . . . . . 4.10.4. Telluroesters as source of acyl radicals . . . . . . . . . . . . . . . . . . . . . . 4.10.5. Aryl telluroformates as precursors of oxyacyl and alkyl radicals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.10.6. Aryltelluroformates as precursors of selenium-containing heterocycles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.10.7. 2-Allyloxy and 2-propargyloxy alkyl tellurides as precursors of tetrahydrofuran derivatives . . . . . . . . . . . . . . . . . . . . . 4.10.8. Telluroglycosides as source of glycosyl radicals . . . . . . . . . . . . . . . 4.10.9. Radical-mediated group-transfer imidoylation with isonitriles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.10.10. Three-component coupling of silyltellurides, carbonyl compounds and isocyanides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.10.11. Synthesis of substituted quinones via organotellurium compounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.10.12. Thiotelluration of vinyl cyclopropanes. Thio- and selenotelluration of acetylenes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.10.13. Perfluoroalkyltelluration of terminal olefins and alkynes . . . . . . . . . 4.10.14. Synthesis of indole derivatives via radical cyclization of N-(ortho ethynylbenzene)-phenyltelluro trifluoro acetimidates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.10.15. Organotellurium compounds as initiators for controlled living radical polymerization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
247 247 248 251 251 252 252
255 257 258 260 261 261 262 263 265 266 270 271 272 273 274 275 277 279 281
282 283
Telluroheterocycles 5.1.
Tellura-3,5-cyclohexanedione dichlorides (3,5-dioxotellurane-1,1-dichlorides) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
285
DETAILED CONTENTS
5.2. 5.3.
5.4.
5.5.
5.6. 5.7. 5.8.
5.9.
5.1.1. From 2,4-dioxopentanes and tellurium tetrachloride and derivatives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Oxa and 1-thia-4-telluranes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2.1. From Na2Te and 2-haloethyl ether or sulphide . . . . . . . . . . . . . . . . . . . Tellurophenes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3.1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3.1.1. From alkali metal tellurides . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3.1.2. From tellurium tetrachloride . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3.1.3. From 1,4-dibutyltellurobutadiene . . . . . . . . . . . . . . . . . . . . . . 5.3.1.4. From butyltellurobutenines . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3.2. Reactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3.2.1. Via 2-lithiotellurophene 2-substituted derivatives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3.2.2. Formylation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3.2.3. Acetylation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3.2.4. Chloromethylation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3.2.5. Acetoxymercuriation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3.2.6. Modifications of the functionalized tellurophenes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3.2.7. Formation of complexes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3.2.8. Removal of tellurium from the ring . . . . . . . . . . . . . . . . . . . . 1-Benzotellurophenes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.4.1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.4.1.1. From tellurium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.4.1.2. From TeO2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.4.1.3. Via cyclization of ortho-acetyl or formyl-substituted phenyl telluro compounds . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.4.1.4. From o-phenylethenyl tellurium trichloride . . . . . . . . . . . . . . 5.4.2. Reactions of 1-benzotellurophene and 3-oxo-2,3-dihydrobenzotellurophene . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.4.3. Ring cleavage of the tellurophene ring . . . . . . . . . . . . . . . . . . . . . . . . . . Benzotellurepines, tellurochromenes and tellurochromones . . . . . . . . . . . . . . . . 5.5.1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5.2. Reactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Benzo-[c]-tellurophenes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.6.1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Telluro[3,4-c]thiophene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.7.1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dibenzotellurophenes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.8.1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.8.1.1. From tellurium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.8.1.2. From tellurium dichloride . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.8.1.3. From tellurium IV halides . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.8.1.4. From bis[2,2′-biphenyldiyl]tellurium . . . . . . . . . . . . . . . . . . . 5.8.2. Reactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.8.2.1. Halogenation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.8.2.2. Cleavage of Te–C bond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Naphtothia-, Naphtoselena- and Naphtoditellurole . . . . . . . . . . . . . . . . . . . . . . . 5.9.1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
xxi
285 285 285 286 286 286 287 288 288 289 289 289 290 290 290 290 291 291 291 292 292 292 293 294 295 296 297 297 299 300 300 301 301 301 301 301 302 302 303 303 303 304 304 305
xxii
DETAILED CONTENTS 5.10.
5.11. 5.12.
5.13. 5.14. 5.15.
5.16. 5.17. 5.18.
5.19. 5.20. 5.21.
5.22.
5.23. 5.24. 5.25. 5.26.
6 7
2H-1,3-ditelluroles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.10.1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.10.1.1. From alkalimetal ethynetellurolates . . . . . . . . . . . . . . . . . 5.10.2. Reactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.10.2.1. Lithiation and reaction with electrophiles . . . . . . . . . . . . Tetratellurafulvalenes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.11.1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tellurin and derivatives of 4-H-tellurins and 4-oxo-4-H-tellurins (telluropyran-4-ones) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.12.1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.12.1.1. Method a . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.12.1.2. Method b . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.12.2. Reactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2H-1-Benzotellurin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.13.1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4H-1-Benzotellurins and 4-oxo-4H-1-Benzotellurins . . . . . . . . . . . . . . . . . . . . 5.14.1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Telluroxanthenes/telluroxanthones (and derivatives) . . . . . . . . . . . . . . . . . . . . . 5.15.1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.15.2. Reactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Phenoxatellurins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.16.1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Phenothiatellurins/phenoselenotellurins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.17.1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Telluranthrenes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.18.1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.18.1.1. From tellurium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.18.1.2. From sodium telluride . . . . . . . . . . . . . . . . . . . . . . . . . . . Bis-thieno-1,4-ditellurins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.19.1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,4-Tellurino-1,4-tellurins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.20.1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Benzene-fused heterocycles containing tellurium, selenium and sulphur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.21.1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,5-Ditelluracyclooctane and 5H,7H-dibenzo [b,g][1,5]tellurothiocin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.22.1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ditellurane derivatives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.23.1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reductive dimerization of telluro- and selenoxanthone . . . . . . . . . . . . . . . . . . Tellurosteroids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21,21-Dihalo-21-telluroporphyrin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Toxicology of Organotellurium Compounds
305 306 306 307 307 307 307 308 308 309 309 310 311 311 311 311 313 313 314 315 315 316 316 317 318 318 319 319 319 320 320 320 320 321 321 323 323 324 324 324
329
Pharmacology of Organotellurium Compounds 7.1.
Chemopreventive activity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
333
DETAILED CONTENTS
8
xxiii
Miscellaneous 8.1.
8.2. 8.3.
Some additional applications of TeCl4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.1.1. Preparation of α-methylene ketones . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.1.2. Olefin inversion by syn-chlorotelluration/antidechlorotelluration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.1.3. Tellurium tetrachloride as a catalyst for dithioacetalization and ketalization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.1.4. Tellurium tetrachloride as reagent for the conversion of alcohols into alkyl chlorides and as a Lewis acid catalyst for aromatic alkylation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.1.5. Tellurium-tetrachloride-promoted rearrangement of cycloheptatriene to benzylic alcohols . . . . . . . . . . . . . . . . . . . . . . . . . . 8.1.6. Tellurium tetrachloride as a catalyst for cationic oligo- and polymerization reactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . α-Hydroxyalkylation of α,β-unsaturated carbonyl compounds . . . . . . . . . . . . . . Conversion of allylsilanes into allylamines via phenyltellurinylation . . . . . . . . .
Index
337 337 338 338
339 340 341 341 342
345
This page intentionally left blank
Abbreviations AIBN CTAB DIBAL-H DME DMSO ee ESR GC-MS HMPA LICA LiTMP m-CPBA MPLC NBSP NMP NOESY PTC TBTH TCNQ TEMPO TFA TLC TMEDA TUDO
2,2⬘-Azo bisisobutyronitrile Cetyl trimethylammonium bromide Diisobutylaluminium hydride 1,2-Dimethoxyethane Dimethyl sulfoxide Enantiomeric excess Electron spin resonance Gas chromatography-mass spectrum Hexamethylphosphoric acid triamide Lithium isopropylcyclohexylamide Lithium 2,2,6,6-tetramethylpiperidide meta-Chloroperbenzoic acid Medium pressure liquid chromatography para-Nitrobenzenesulphonyl peroxide N-methyl-2-pyrrolidinone Nuclear overhauser enhancement spectroscopy Phase transfer catalyst Tributyltin hydride 7,7,8,8-Tetracyano-para-quinodimethane 2,2,6,6-Tetramethyl-1-piperidinyloxy free radical Trifluoroacetic acid Thin layer chromatography N,N,N′,N′-tetramethyl-1,2-ethanediamine Thiourea dioxide
xxv
This page intentionally left blank
–1– Introduction
1.1
SOME PHYSICAL PROPERTIES OF TELLURIUM
The Pauling electronegativities of carbon and tellurium are, respectively, 2.5 and 2.1. This, in addition to the large volume of the tellurium atom (atomic radius 1.37, ionic radius 2.21), promotes easy polarization of Te–C bonds. The ionic character of the bonds increases in the order C(sp3)⫺Te⬎C(sp2)⫺Te⬎C(sp)⫺Te, in accordance with the electronegativity of carbon accompanying the s character (Table 1.1). The Te⫺C bond therefore exhibits a high reactivity, as demonstrated typically by the easy heterolytic cleavage towards nucleophilic reagents.
1.2
RELEVANT MONOGRAPHS AND REVIEW ARTICLES
1. Rheinboldt, H. in Houben-Weyl-Methoden der Organischen Chemie (ed. E. Muller). 4th edn, Vol. IX. Georg Thieme, Stuttgart, 1955. 2. Petragnani, N.; Moura Campos, M. Organomet. Chem. Rev. 1967, 2, 61. 3. Cooper, W. C. (ed.). Tellurium. Van Nostrand Rheinhold, New York, 1971. 4. Irgolic, K. J.; Zingaro, R. in Organometallic Reactions (eds. E. Becker; M. Tsutsui). Wiley, New York, 1971. 5. Irgolic, K. J. The Organic Chemistry of Tellurium. Gordon and Breach, New York, 1974. 6. Irgolic, K. J. J. Organomet. Chem. 1975, 103, 91. lrgolic, K. J. J. Organomet. Chem. 1977, 130, 411. Irgolic, K. J. J. Organomet. Chem. 1978, 158, 235; Irgolic, K. J. J. Organomet. Chem. 1980, 189, 65. Irgolic, K. J. J. Organomet. Chem. 1980, 203, 368. Table 1.1 Some physical properties of the VIA family of elements Element Atomic number
Atomic Electronic mass configuration
O S Se Te
15.99 32.06 78.96 127.6
8 16 34 52
1s22s22p4 2s22p63s23p4 3s23p63d104s24p4 4s24p64d105s25p4 1
Pauling Ionization electronegativity potential
Ionic radius
Atomic radius
3.5 2.5 2.4 2.1
1.40 1.84 1.98 2.21
0.66 1.04 1.17 1.37
13.61 10.36 9.75 9.01
2
1. INTRODUCTION
7. Uemura, S. Nippon Kagaku Kaishi 1981, 36, 381. 8. Petragnani, N.; Comasseto, J. V. Proceedings of the 4th International Conference of the Organic Chemistry of Selenium and Tellurium (eds. F. Y. Berry; W. R. McWhinnie), pp. 98–241. The University of Aston in Birmingham, Birmingham, 1983. 9. Uemura, S. J. Synth. Org. Chem. Jpn. 1983, 41, 804. 10. Engman, L. Acc. Chem. Res. 1985, 18, 274. 11. Petragnani, N.; Comasseto, J. V. Synthesis 1986, 1. 12. Suzuki, H. Synth. Org. Chem. Jpn. 1987, 45, 603. 13. Sadekov, D.; Rivkin, B. B.; Minkin, V. Y. Russ. Chem. Rev. 1987, 56, 343. 14. Patai, S.; Rappoport, Z. (ed.). The Chemistry of Organic Selenium and Tellurium Compounds, Vols I and II. Wiley, New York, 1986, 1987. 15. Engman, L. Phosphorus Sulfur 1988, 38, 105. 16. Irgolic, K. Y. Houben-Weyl Methods of Organic Chemistry (ed. D. Klamann). 4th edn, Vol. E12b. Georg Thieme, Stuttgart, 1990. 17. Petragnani, N.; Comasseto, J. V. Synthesis 1991, 793. 18. Petragnani, N.; Comasseto, J. V. Synthesis 1991, 897. 19. Petragnani, N. Tellurium in Comprehensive Organometallic Chemistry II (ed. A. McKillop). Vol. 11, Chapter 14. Pergamon, Elsevier, 1995. 20. Comasseto, J. V.; Lo, W. L.; Petragnani, N.; Stefani, H. A. Synthesis 1997, 4, 373. 21. Petragnani, N.; Stefani, H. A. Tetrahedron 2005, 61, 1613.
–2– Preparation of the More Important Inorganic Tellurium Reagents
2.1
TELLURIUM TETRACHLORIDE
Tellurium tetrachloride is prepared directly from the respective elements.1 Te + 2Cl2
TeCl4
Experimental procedure1. The apparatus in Figure 2.1 is charged with 100–150 g of finepowdered Te (the apparatus and the Te have been previously heated overnight at 110°C to ensure dryness). A stream of Cl2 (dried by bubbling in concentrated H2SO4) is slowly introduced by means of a Tygon tube; meanwhile, the apparatus is heated with a small burner flame. After a few minutes the solid Te begins to be converted into a black liquid. The reaction is exothermic (and proceeds spontaneously), but the absorption of Cl2 is accelerated by heating the mixture from time to time. After a while the mixture becomes clearer, giving finally an amber-coloured liquid, which by increased heating forms a vapour of the
Figure 2.1 Apparatus to prepare TeCl4. 3
4
2. PREPARATION OF THE MORE IMPORTANT INORGANIC TELLURIUM REAGENTS
same colour. At that time the absorption is complete and all the Te has been converted into TeCl4. By vigorous burner heating, the product is transferred by distillation, under a continuous Cl2 stream, into the tubes, where it solidifies. The tubes are detached from the apparatus by melting. The yield is 90%. Tellurium tetrachloride is a pale yellow crystalline solid, melting point (m.p.) 225°C, highly hygroscopic, soluble in dioxane, acetone, ether, methanol and ethanol but less soluble in benzene and chloroform. Tellurium tetrachloride is instantaneously hydrolysed by water, giving tellurium oxochloride, which is soluble in concentrated hydrochloric acid, forming HTeCl5 and H2TeCl6. TeCl4 + H2O
TeOCl2 + 2HCl
The Raman data suggest the ionic structure for TeCl3⫹ Cl⫺ in both the solid and liquid states.2
2.2
TELLURIUM DIOXIDE
Tellurium dioxide is prepared by oxidation of elemental tellurium with concentrated nitric acid.3
Te
conc. HNO3
2TeO2 . HNO3
400°C
TeO2
Experimental procedure.3 Commercial Te (20 g, finer than 60 mesh) is weighed into a 1000 mL beaker, covered with H2O (200 mL) and treated by the slow addition of 95 mL of concentrated HNO3 (95 mL, specific gravity 1.42). The reaction is allowed to continue for 5–10 min with occasional agitation. Insoluble impurities are removed immediately by filtration on a Büchner funnel. The filtrate is transferred to a 600 mL beaker. Concentrated HNO3 (65 mL) is then added and the solution boiled until oxides of nitrogen have been expelled. Basic nitrates of antimony and bismuth precipitate at this point if these substances are present as impurities. These are removed by filtering through asbestos, after which the clear liquor is evaporated gently on a water bath under a hood in an open 600 mL beaker. Basic tellurium nitrate is deposited. The evaporation is continued until the solution volume has been reduced to 100 mL. The solution is then cooled. The crystalline deposit is filtered, washed with H2O on a suction filter and air dried. The dry crystals are placed in a 400 mL beaker, covered by inverting a 1000 mL beaker over the smaller beaker, and heated at a hot-plate temperature of 400–430°C for 2 h. The TeO2 (21 g, 84%) is cooled and bottled immediately to avoid slow darkening due to reduction by organic matter from the atmosphere.
2.3 ALKALI METAL TELLURIDES (Te2⫺Cat2⫹)
5
Tellurium dioxide is a white solid existing in two crystalline forms. It is soluble in water and in both aqueous sodium hydroxide and hydrochloric acid.
2.3
⫺ ⫹ Cat2⫹ ) ALKALI METAL TELLURIDES (Te2⫺
These reagents are usually prepared in situ. The preparative methods are outlined in sequence and representative experimental procedures are described in later chapters. 2.3.1 From the elements (2Na + Te → Na2Te) 2.3.1.1
In liquid ammonia4
2.3.1.2
In DMF5
2.3.1.3
In the presence of naphthalene6
2.3.2 From tellurium and reducing agents (Te → Te2−−) 2.3.2.1
Rongalite (HOCH2SO2Na/NaOH )7
2.3.2.2
Thiourea dioxide (TUDO, HN=C(NH2)S(O)OH)/NaOH8
2.3.2.3
Hydride transfer reagents
KBH4/NaOH9 Me4NBH4 (giving tetramethylammonium telluride)10 NaBH4/DMF11 NaBH4/H2O12 LiHBH313 2.3.2.4
Tin(II) chloride/KOH/DMSO14
2.3.2.5
Hydrazine hydrate/NaOH15
2.3.3 From tellurium and non-reducing bases 2.3.3.1
NaH/DMF16
2.3.3.2
NaH/DME17
2.3.3.3
NaH/N-methyl-2-pyrrolidone18
6
2. PREPARATION OF THE MORE IMPORTANT INORGANIC TELLURIUM REAGENTS
2.4
ALKALI METAL DITELLURIDES (Na2Te2)
2.4.1 From the elements (2Na + 2Te → Na2Te2) 2.4.1.1
In liquid ammonia19
2.4.1.2
In HMPA20
2.4.1.3
In the presence of naphthalene21 red
⫺ 2.4.2 From tellurium and reducing agents (2Te → Te22⫺ )
2.4.2.1
Rongalite22
2.4.2.2
TUDO/NaOH23
2.4.2.3
Hydride transfer reagents
NaBH4/EtONa/EtOH24 NaBH4/DMF25 2.4.2.4
Hydrazine hydrate/NaOH26
2.5
HYDROGEN TELLURIDE (H2Te)
Hydrogen telluride is prepared in situ by hydrolysis of aluminium telluride.27 Al2Te3 + 3H2O → 3TeH2 + Al203
2.6
SODIUM HYDROGEN TELLURIDE (NaHTe)
Sodium hydrogen telluride is prepared by reduction of tellurium with NaBH4 under several conditions. The original procedure uses ethanol as the solvent, adding, after complete reduction of the tellurium, an appropriate amount of acetic acid (see Section 4.1.2, ref. 10; Section 4.1.7, ref. 29). REFERENCES 1. 2. 3. 4.
Suttle, Y. F.; Smith, C. R. F. Inorg. Synth. 1956, III, 140. Gerding, H.; Houtgraff, H. Recl. Trav. Chim. 1954, 73, 737. Marshall, H. Inorg. Synth. 1950, III, 143. Section 3.1.1.1 (a), ref. 1.
REFERENCES
7
5. Section 3.1.1.1 (a), ref. 8. 6. Section 3.1.1.1 (a), refs. 10, 11. 7. Section 3.1.1 1 (b), refs. 14, 15; Section 4.1.6, ref. 19; Section 4.1.9, ref. 33; Section 4.1.11, ref. 41; Section 4.2.5, ref. 6. 8. Section 3.1.1.1 (b), ref. 23. 9. Section 3.1.1.1 (b), ref. 24. 10. Section 3.1.1.1 (b), ref. 15. 11. Section 3.1.2.2, ref. 8; Section 4.1.11, ref. 40; Section 4.3.1.1, ref. 2. 12. Section 3.1.3.1, ref. 1; Section 4.1.13.1, ref. 49. 13. Section 5.1, ref. 2. 14. Section 3.1.1.1 (b), ref. 26. 15. Section 3.1.1.1 (b), ref. 27. 16. Section 3.1.2.1, ref. 5; Section 3.16.1.3, ref. 27; Section 4.1.5, ref. 17; Section 4.2.1, ref. 1; Section 4.3.2.2, ref. 5. 17. Section 4.2.5, ref. 5. 18. Section 3.1.2.1, ref. 7. 19. Section 3.2.1.1, ref. 1. 20. Section 3.2.1.2, ref. 10. 21. Section 3.2.1.1, ref. 3. 22. Section 3.2.1.1, ref. 6. 23. Section 3.2.1.1, ref. 7. 24. Section 3.2.1.1, ref. 5. 25. Section 4.3.1.1, ref. 2. 26. Section 3.2.1.1, ref. 9. 27. Section 4.1.1.1, ref. 1; Section 4.1.4, ref. 14; Section 4.1.6, ref. 18.
This page intentionally left blank
–3– Preparation of the Principal Classes of Organic Tellurium Compounds
This chapter is devoted mainly to the preparation of those classes of organotellurium compounds that have been more systematically investigated in past years, owing to their peculiar role as reagents or intermediate in organic synthesis, including compounds of structural, biological or theoretical interest. Sections 3.1–3.3 outline the principal preparative methods of diorganyl tellurides and ditellurides, organyltellurium trichlorides and diorganyltellurium dichlorides, which were the first classes of compounds investigated at the beginning of tellurium organic chemistry. The physical properties and stability of the compounds are also described briefly.
DIORGANYL TELLURIDES (SECTION 3.1) The main routes to symmetrical diorganyl tellurides involve the direct reaction of nucleophilic telluride dianions (usually as Na2Te) with alkylating or arylating reagents. Otherwise the electrophilic tellurium tetrahalides react with arylmagnesium reagents, giving diaryl tellurides. Unsymmetrical tellurides are obtained as follows: • • •
starting from nucleophilic tellurolate anions (easily generated by telluration of Grignard and lithium reagents or by reduction of diorganyl ditellurides) by reaction with alkylating or arylating reagents, or by addition to acetylenes; by cleavage of diaryl ditellurides with arylmagnesium reagents, diazonium salts, or arenesulphonylazo compounds; by the reaction of electrophilic tellurenyl halides with Grignard reagents.
9
10
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
2RX
RTeR
2ArX Te2-
ArMgX (exc.)
ArTeAr
[2ArN2+]XRX.R1X
R1X
RTeR1
RTe-
RX
Ar-
ArTe-
R-
Te
R(Ar)Te
R(Ar)
ArTeR
TeX4
Te
NaBH4 R-
Na (Li) [ArTeX] Ar1X
R(Ar)
ArTeTeAr X2
Ar1ArTeAr1 [Ar1N2+]XAr1N = NSO2Ar
Diorganyl tellurides have low molecular mass and are colourless or yellowish liquids with an unpleasant and penetrating odour. Dimethyl telluride is a metabolite of tellurium and tellurium compounds in a variety of living organisms, including humans. Higher dialkyl tellurides and most diaryl tellurides are solids with low melting points (diphenyl telluride is a liquid). Diorganyl tellurides are soluble in common organic solvents. Because of the above-mentioned organoleptic properties, it is recommended that contact between dialkyl tellurides and the skin is avoided, and that, in general, all work involving diorganyl tellurides is performed under a well-ventilated hood. The thermal stability and sensitivity to the atmosphere of diorganyl tellurides is dependent on the organic moiety. Many aliphatic, cycloaliphatic, as well as vinylic and acetylenic tellurides are reported to be decomposed by light, and therefore some authors recommend preparation of these compounds in the dark or under a red light.1 These tellurides are also sensitive to exposure to the open atmosphere, easily undergoing oxidation to mixtures containing the corresponding telluroxides in addition to other products. These oxidations are especially effective in solution, where the oxidation products separate as amorphous insoluble solids. Benzyl groups in tellurides are characterized by a peculiar lability, as demonstrated by the oxidative cleavage of aryl benzyl tellurides leading to aromatic carbonyl compounds.2 Diaryl tellurides are generally more stable and can be handled in the open atmosphere.
DIORGANYL DITELLURIDES (SECTION 3.2) Diorganyl ditellurides are prepared by three routes: • •
alkylation or arylation of the ditelluride dianion (usually as Na2Te2); oxidation of tellurolate anions;
ORGANYLTELLURIUM TRICHLORIDE AND DIORGANYLTELLURIUM DIHALIDES
•
11
reduction of the corresponding organyltellurium trichlorides. red. 2RX
RTeTeR
Te222ArX
ArTeTeAr
RTeCl3 R-
ox.
RTe-
ox.
ArTe-
red.
ArTeCl3
Ar-
Te
The Te2 group is a chromophore, and aliphatic and aromatic ditellurides exhibit a characteristic orange to pale or dark red colour (absorption maximum at ~400 nm). The short-chain aliphatic ditellurides are liquids with a pungent odour, whereas the higher members (more than 10 C chains) are solids with low melting points. Diaryl ditellurides, which are more important as synthetic intermediates, are solids, highly soluble in solvents such as petroleum ether, benzene, chloroform, ether, and tetrahydrofuran (THF), but are less soluble in methanol and ethanol. Dibenzyl ditelluride exhibits the peculiar lability of the tellurium–benzyl bond already mentioned for the corresponding tellurides. By heating the solid at 120°C, or by exposure in solution to ordinary incandescent lighting or to a Hanovia lamp, a rapid decomposition into elementary tellurium and dibenzyl telluride occurs.3
ORGANYLTELLURIUM TRICHLORIDE AND DIORGANYLTELLURIUM DIHALIDES (SECTIONS 3.5 AND 3.9) Organyltellurium trichlorides and diorganyltellurium dichlorides are prepared starting from the electrophilic tellurium tetrachloride (or aryltellurium trichlorides) by: • • • •
condensation reactions with active methylene compounds; addition to a C⫽C bond (or a C⬅C bond, not shown in the scheme); electrophilic substitution in aromatic hydrocarbons; and reaction with organomercury chlorides.
Organyltellurium trichlorides and the not directly accessible tribromides and triiodides are obtained by the halogenolysis of the Te–Te bond of the corresponding ditellurides. Diorganyltellurium dihalides can also be prepared by the addition of halogens to the parent tellurides. R
TeCl3 R
Y
R
or
Y
Y
Cl
Cl
or
)2 TeCl2
TeCl3
TeCl4 ArH ArHgCl
ArTeCl3
)2 TeCl2
ArH
Ar2TeCl2
ArHgCl
Ar1HgCl
ArAr1TeCl2
12
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
ArTeCl2 R
ArTeCl3
Ar1H
Y
R
Y
ArAr1TeCl2 Cl ArTeCl2
ArTeTeAr
3X2 red
ArTeAr
X2
2ArTeX3 X = Cl, Br, I Ar2TeX2
red
The tri- and dihalides are crystalline compounds. The chlorides are colourless (or yellow such as some aryltellurium trichlorides), the colour changing to orange and red (or deep red) for the bromides and iodides. The aryltellurium trihalides are generally more stable than the alkyltellurium trihalides (alkyltellurium trichlorides, produced by the addition of TeCl4 to olefins, easily liberate elemental tellurium). The reactivity of aryltellurium trihalides decreases on going from the chlorides to the iodides, the same trend occurring for hydrolysis. Aryltellurium trichlorides are very sensitive to water and moisture and are easily hydrolysed, the tribromides being more stable, while the triiodides are unaffected by cold water and can be prepared even by aqueous procedures. Diaryltellurium dihalides are stable in water, and ionic exchange reactions allow the conversion of dichlorides into dibromides and diiodides. Aryltellurium trichlorides are highly soluble in methanol and ethanol but less soluble in benzene. Diaryltellurium dichlorides exhibit inverse solubilities, being more soluble in benzene than in methanol or ethanol. These properties allow an easy separation of diaryl tellurides from diaryl ditellurides (frequently formed as by-products in the preparation of tellurides): the mixture is treated with SO2Cl2 and the obtained mixed di- and trichlorides are separated by the appropriate solvents, and reduced back into the pure tellurides and ditellurides.
REFERENCES 1. Clive, D. L. J.; Chittattu, G. J.; Farina, V.; Kiel, W. A.; Menchen, S. M.; Russell, C. G.; Singh, A.; Wong, C. K.; Curtis, N. J. J. Am. Chem. Soc. 1980, 102, 4438. 2. Ferreira, J. T. B.; Oliveira, A. R. M.; Comasseto, J. V. Tetrahedron Lett. 1992, 33, 915. 3. Spencer, H. K.; Cava, M. P. J. Org. Chem. 1977, 42, 2937.
3.1 DIORGANYL TELLURIDES
3.1
13
DIORGANYL TELLURIDES
Diorganyl tellurides, compounds with two organic groups linked to a tellurium atom, constitute the most abundant and familiar class of organic tellurium compounds. The organic groups, of the most differentiated types, can be identical or different, giving rise to symmetrical or unsymmetrical tellurides. Since symmetrical dialkyl and diaryl tellurides are the most employed in organic synthesis, and often exhibit structural or biological interest, their preparation will be examined in detail, focusing on the methods and procedures that are considered as the most popular. 3.1.1 Symmetrical dialkyl tellurides 3.1.1.1
From alkali tellurides and alkylating agents Te2- + 2RX
RTeR
Alkali tellurides, among which sodium telluride is the most widely employed, are powerful nucleophilic reagents and therefore react easily with alkylating agents. (a) From sodium telluride prepared from the elements (i) Sodium/liquid ammonia method
Te + 2Na
NH3 liquid
Na2Te
RX
RTeR
This method has been applied successfully to n- and s-alkyl halides.1–4 Dialkyl tellurides (general procedure).1 Elemental Te is added in ~0.5 g portions to a wellstirred solution of Na in liquid NH3 until the solution decolourizes, forming a colourless suspension (2 g-atom Na/1 g-atom Te). The quantities of the materials are chosen to give a suspension of ~0.7 M. The alkylating agent is added dropwise in 10% excess to the suspension of Na2Te. The reaction mixture is stirred until the NH3 evaporates. H2O is then added, the mixture extracted with ether and the ethereal solution worked up in the usual manner. Diethyltelluride: yield 80%; b.p. 38°C/14 torr, Diisopropyltelluride: yield 80%; b.p. 49°C/14 torr. When the alkylating agent is insoluble in liquid ammonia, as in the case of long-chain compounds, an organic solvent is added to the sodium telluride residue after evaporation of the ammonia. Some cyclic and steroidal tellurides have been prepared from sodium telluride in ethanol and the appropriate dihalides.5–7
14
(ii)
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
Sodium/DMF method 8,9 Te + 2Na
DMF
Na2Te
RX
RTeR
O O Bis(2-phenyl-1,2-dioxolan-2-yl)methyl telluride (R⫽Ph–C–CH2) (typical procedure).8 Finely powdered Te (0.30 g, 2.3 mmol) and Na (0.22 g, 9.6 mmol) are stirred under N2 in dry DMF (15 mL) at 110°C until all the Te has disappeared (15 min). 2-(Bromomethyl)2-phenyl-1,3-dioxolane (1.15 g, 4.7 mmol) in dry THF (10 mL) is added to the resulting yellowish suspension. After 2.5 h at room temperature the reaction mixture is poured into H2O and extracted with ether. Chromatography on SiO2 (eluent: CH2Cl2/petroleum ether at 40–60°C, 1:1) furnishes the telluride (0.65 g (60%); recrystallized from EtOH, m.p. 67–68°C). Additional examples: R ⫽ n-C12H25 (66%), PhCH⫽CH- (41%).9 (iii) Sodium/naphthalene method Sodium telluride can be prepared under mild conditions from the elements in the presence of catalytic amounts of naphthalene10 or by treating tellurium with sodium naphthalide.11 Te
Na/naphthalene RX Na2Te RTeR THF (60-90%)
R = Et, n - Pr, n - Bu, MeOCH2CH2
Dialkyl tellurides (general procedure).10 Te powder (3.58 g, 28 mmol), Na chips (1.29 g, 56 mmol), and naphthalene (0.72 g, 5.6 mmol) in THF (25 mL) are refluxed under N2 and stirred for 3 h. The heterogeneous white mixture is cooled at 0°C and the alkyl halide (56 mmol) is added slowly, stirring for 30 min. After 30 min of additional stirring, the mixture is filtered, the solution evaporated and the residue distilled under vacuum, giving the telluride. Diallyl telluride (typical procedure).11 In a 25 mL Schlenk flask, Te pieces (6.1 g, 48 mmol, from a Te ingot), Na (2.2 g, 96 mmol) and naphthalene (0.1 g, 0.8 mmol) in THF (20 mL) are stirred under argon at 25°C for 4 days. The mixture is filtered and the filter cake washed with THF (20 mL) and dried under vacuum to give Na2Te (7.6 g, 92%). Alternatively, Te powder (60 mesh) and sodium naphthalide (2 mol equiv) are stirred in THF for 4 h. Na2Te is isolated as an amber-coloured solid. The Na2Te (62.9 g, 0.362 mmol) is slurried in absolute EtOH (400 mL). The slurry is cooled at 0°C and allyl bromide (93.3 g, 0.77 mmol) is added dropwise during a 1-h period while stirring. The mixture is stirred for an additional hour at 20°C and then filtered. The grey filter cake is washed with EtOH (400 mL). The combined washing and filtrate are evaporated at atmospheric pressure. The residue is distilled, giving diallyl telluride as a pungent, air-sensitive, yellow liquid (56.7 g (75%); b.p. 70–72°C/13 torr).
3.1 DIORGANYL TELLURIDES
15
(b) From alkali tellurides prepared from tellurium and reducing agents (i) Rongalite (sodium formaldehyde sulphoxylate) method This method was first described at the beginning of the past century,12 and continues to find a wide application.
Te
HOCH2SO2Na NaOH/H2O
Na2Te
RX
RTeR
n-Alkyl halides, benzyl chloride, ethyl sulphate, and s-alkyl bromides give the expected tellurides in medium yields whereas t-butyl chloride is not converted into the telluride.13–15 Owing to the insolubility of the alkyl halides, ethanol must be added to the reaction mixture. Dibenzyl telluride (typical procedure).15 Rongalite (18.0 g, 0.5 mol) is added under N2 at 80°C to a suspension of Te (2.56 g, 20 mmol) in a solution of NaOH (12 g, 0.3 mol) in 125 mL of H2O. After stirring for 1 h, a solution of benzyl chloride (1.26 g, 10 mmol) in a small volume of EtOH is added dropwise at room temperature to the almost colourless telluride solution. After stirring for an additional hour, the mixture is extracted with ether, and the ethereal solution dried (MgSO4) and evaporated. The residue is recrystallized from petroleum ether (40–60°C) under red light, giving the telluride as yellow needles (1.09 g (70%); m.p. 49–57°C). Cyclic tellurides, 16–18 including some with a steroidal structure,19,20 have been prepared by the Rongalite method. Te ( )n
Te
Te
Y Y = 0, S
n = 1, 2
(ii) Sodium dithionite and thiourea dioxide method The use of sodium dithionite (Na2S2O4) and thiourea dioxide (TUDO; HN⫽C(NH2)S(O)OH) has been introduced later as a reducing agent for the preparation of sodium telluride in an aqueous medium, followed by reaction with n-alkyl halides to give dialkyl tellurides.21,22 The TUDO method has been reinvestigated and has found wide use because of the simplicity of the experimental conditions.23 TUDO RX Na2Te THF (CTBA) RTeR NaOH/H2O/THF (72 - 85%) R = n- C12H23, n- C8H17, i - C3H7CH2CH2, THPO(CH2)6 Te
16
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
Dialkyl tellurides (general procedure).23 A mixture of TUDO (0.2 g, 2 mmol), NaOH (0.112 g, 2.6 mmol), Te powder (0.128 g, 1 mmol) in H2O (0.75 mL) and THF (0.75 mL) is refluxed for 1 h. The alkyl halide (2 mmol) and (cetyl trimethyl ammonium bromide) CTBA (0.004 g, 1.1 ⫻ 10⫺5 mmol) in THF (0.5 mL) are added to the pale pink solution. After 1 h of additional reflux the mixture is worked up in the usual manner and the residue purified by column chromatography on SiO2 (elution with petroleum ether 40–60°C). (iii) Hydride transfer reagent method A useful method for the reductive conversion of elemental tellurium into Te2⫺ anions employs complex hydrides such as sodium or potassium borohydride and tetraalkyl ammonium borohydride as reducing agents.
Te
cat+BH42solvent /reflux Te
cat =
Na+,
K+,
RX
RTeR
Me4N+
Di-n-octyl telluride (typical procedure).24 Elemental Te (2.54 g, 20 mmol) is heated at reflux in 20% aqueous NaOH (43 mL) containing KBH4 (2.7 g, 50 mmol), under argon. After 1.5 h the mixture is deep purple, but after an additional 30 min of reflux turns pale yellow and no Te metal remains. Bromooctane (7.72 g, 40 mmol) in MeOH (50 mL) is added, the solution refluxed for 30 min, cooled, poured into H2O (100 mL) and extracted with ether (3⫻). The ether extracts are washed with H2O, dried (Na2SO4) and evaporated. The oily residue is distilled under vacuum, giving the telluride (5.5 g (78%); b.p. 154°C/0.7 torr). Dibenzyl telluride (typical procedure).15 Elemental Te (1.27 g, 10 mmol) and Me4NBH4 (1.78 g, 20 mmol) are heated in H2O (100 mL) in a steam bath under N2 until the initially produced purple colour is discharged. After cooling at room temperature, benzyl chloride (2.53 g, 20 mmol) in EtOH (20 mL) is added slowly with stirring and rigorous exclusion of air. After 2 h of stirring, the mixture is extracted with ether, dried and evaporated. The residue is recrystallized from petroleum ether (under red light), giving the telluride as yellow needles (2.56 g (82%); m.p. 49–57°C). In an interesting one-pot procedure the borohydride is used as both the reducing and alkylating agent.25 Te + 2R4NBH4
RTeR + 2R3NBH3 + H2
Di-n-butyl telluride (typical procedure).25 Elemental Te (0.63 g, 5 mmol) and n-Bu4NBH4 (3.87 g, 15 mmol, 50% excess) are refluxed in toluene (80 mL) under N2 and stirring. The initial red solution gradually turns colourless, giving a clear solution after 3 h. The cooled solution is washed with H2O (50 mL) and 1 M HCl (50 mL) (evolution of H2). The organic phase is dried (CaCl2) and evaporated, giving an oil (mixture of the telluride and Bu3NBH3). The telluride is separated by column chromatography on SiO2 (eluent: CH2Cl2/petroleum ether at 40–60°C, 1:1) (1.20 g (95%); nD20⫽1.5165).
3.1 DIORGANYL TELLURIDES
17
(iv) Tin(n)/potassium hydroxide method 26 Te
SnCl2 /KOH DMSO, 120°C, 10h
K2Te
MeI
MeTeMe
Dimethyl telluride (typical procedure).26 KOH (100 g, 1.78 mol) in dimethyl sulfoxide (DMSO) (180 mL) is heated on a steam bath. SnCl2 (10 g, 53 mmol) and Te powder (60 g, 0.47 mmol) are added and the mixture heated at 120°C for 20 h. After cooling at 40°C, methyl iodide (157 g, 1.1 mol) is added dropwise for 2 h. The mixture is then heated at 70°C for 2 h and then distilled until the condensing vapour reaches a temperature of 100°C. The organic layer of the residue is separated, dried and distilled (71.6 g (97%); b.p. 93–94°C). (v) Hydrazine hydrate method 27 N2H4 /NaOH
RX Na2Te RTeR (55 - 73%) DMF R = Et, n - Bu, n - pentyl, s - Bu, i - pr - CH2CH2, n - octyl
Te
Dibutyl telluride (typical procedure).27 Hydrazine hydrate 80% (0.50 mL, 7.1 mmol) is added dropwise using a syringe to a stirred mixture of finely ground Te (0.64 g, 5 mmol) and powdered NaOH (0.40 g, 10 mmol) in DMF (10 mL) at 50–60°C. After 3 h stirring, n-butyl bromide (1.4 g, 10 mmol) in DMF (2 mL) is added, the mixture is heated at 60°C for a further 30 min, cooled at room temperature and extracted with petroleum ether (40–60°C). The organic phase is separated, washed with H2O, dried (CaCl2) and evaporated, giving the pure telluride (0.69 g (57%); b.p. 111–114°C/13 torr). 3.1.1.2
From bis(triphenylstannyl) telluride and alkylating reagents
The title reagent (prepared by the reaction of sodium hydrogen telluride with chlorotriphenylstannane)28 reacts easily with the more active halides such as benzyl bromides whereas common halides need to be activated by cesium fluoride.29 Alkyl iodides and bromides react satisfactorily under these conditions whereas alkyl chlorides and aryl halides are nonreactive.
Ph3SnTeSnPh3 + RX
MeCN THF
PH3Sn TeSnPh3
R X
-Ph3SnF
F.. PH3Sn TeR
R X
40 - 100%
RTeR + Ph3SnF
F.. RX = BzBr, n- C10H21I, n - C10H21Br, i - PrI, EtO2CCH2Br, PhCOCH2Br, Cl(CH2)6Br (giving [Cl(CH2)6]2Te),
Br Br
giving
Te
18
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
Dialkyl tellurides (general procedure).29 Bis(triphenylstannyl) telluride (1 equiv), alkyl halide (2 equiv), excess CsF (4 equiv) and the solvent (MeCN or MeCN/THF) are mixed, kept under N2 and monitored by thin layer chromatography (TLC) (or 1H NMR). Usual work-up of the mixture yields the telluride. REFERENCES 1. Brandsma, L.; Wijers, H. E. Recl. Trav. Chim. Pays-Bas 1963, 82, 68. 2. Sukhai, R. S.; Jong, R. A.; Verkruijsse, H. D.; Brandsma, L. Recl. J. R. Neth. Chem. Soc. 1981, 100, 368. Sukhai, R. S.; Jong, R. A.; Verkruijsse, H. D.; Brandsma, L. Chem. Abstr. 1982, 96, 104204. 3. US 2398414 (1946), Cal Research Corporation; Denison, G. H.; Condit, P. C. Chem. Abstr. 1946, 40, 3598. 4. Bogolyubov, G. M.; Shlyk, Y. N.; Petrov, A. A. J. Gen. Chem. USSR 1969, 39, 1768 (in English). 5. Buchta, E.; Greiner, K. Chem. Ber. 1961, 94, 1311. 6. Zanati, G.; Wolf, M. E. J. Med. Chem. 1972, 15, 368. 7. Zanati, G.; Gaare, G.; Wolf, M. E. J. Med. Chem.1974, 17, 561. 8. Engman, L. Organometallics 1986, 5, 427. 9. Ohe, K.; Takahashi, H.; Uemura, S.; Sugita, N. Nippon Kagaku Kaishi 1987, 1469. 10. Bhasin, K. K.; Gupta, V.; Gautam, A.; Sharma, R. P. Synth. Commun. 1990, 20, 2191. 11. Higa, K.; Harris, D. C. Organometallics 1989, 8, 1674. 12. Tschugaeff, L.; Chlopin, W. Ber. Dtsch. Chem. Ges. 1914, 47, 1274. 13. Balfe, M. D.; Nandi, K. M. J. Chem. Soc. 1941, 70. 14. Balfe, M. P.; Chaplin, C. A.; Phillips, H. J. Chem. Soc. 1938, 344. 15. Spencer, H. K.; Cava, M. P. J. Org. Chem. 1977, 42, 2937. 16. Farrar, W. V.; Gulland, J. M. J. Chem. Soc. 1945, 11. 17. McCullough, J. B. Inorg. Chem. 1965, 4, 862. 18. Holliman, F. G.; Mann, F. G. J. Chem. Soc. 1945, 37. 19. Knapp Jr., F. F. J. Labelled Compd. Radiopharm. 1980, 17, 81. 20. Suginome, H.; Yamada, S.; Wang, J. B. J. Org. Chem. 1990, 55, 2170. 21. Brigov, B. G.; Bregadze, V. I.; Golubinskaya, L. N.; Tonoyan, L. G.; Kozyzkin, B. I. USSR 541, 851, Chem. Abstr. 1977, 87, 5394. 22. Kozyzkin, B. I.; Salamtin, B. A.; Ivanov, L. L.; Kuzovlev, I. A.; Gribov, B. G.; Federov, V. A. Poluch. Anal. Veshchestv Osoboi Chist [Dokl. Vses. Konf.] 1976, 5, 142, Chem. Abstr. 1979, 91, 140278. 23. Ferreira, J. T. B.; Oliveira, A. R.; Comasseto, J. V. Synth. Commun. 1989, 19, 239. 24. Kirsch, G.; Goodman, M. M.; Knapp Jr., F. F. Organometallics 1983, 2, 357. 25. Bergman, J.; Engman, C. Synthesis 1980, 569. 26. Voronkov, M. G.; Stankevich, V. K.; Rodkniko, P. A.; Korchevin, N. A.; Deryagina, E. N.; Trofimov, B. A. J. Gen. Chem. USSR 1987, 57, 2398. 27. Lue, P.; Chen, B.; Yu, X.; Chen, J.; Zhou, X. Synth. Commun. 1986, 16, 1849. 28. Einstein, F. W.; Jones, C. H. W.; Jones T.; Sharma, R. D. Can. J. Chem. 1983, 61, 2611. 29. Li, C. J.; Harpp, D. N. Tetrahedron Lett. 1990, 31, 6291.
3.1.2 Symmetrical diaryl tellurides 3.1.2.1
From sodium telluride and non-activated aryl halides
The normal low reactivity of aryl halides towards nucleophilic reagents is not generally observed in their reaction with alkali tellurides. The observed reactivity seems to be
3.1 DIORGANYL TELLURIDES
19
dependent on the method employed to prepare the alkali telluride as well as on the experimental conditions and solvents. Non-activated aryl halides react only moderately with sodium telluride prepared from the elements in inert solvents (DMF, N-methyl-2-pyrrolidone (NMP), hexamethylphosphoric acid triamide (HMPA)).1–4 Te + 2Na
solvent
Na2Te
ArX solvent, 130 -170°C, 16-24h (35 - 50%)
ArTeAr
solvent = DMF, NMP, HMPA ArX = PhI, 2 - bromonaphthalene
Better results are achieved with tellurium and sodium hydride in DMF.5
Te
NaH DMF, 140°C
Na2Te
ArI DMF, 130°C, 24 h (41 - 70%)
ArTeAr
Ar = 1- naphthyl and derivatives, 2 - fluorenyl
Diaryl tellurides (general procedure).5 A mixture of powdered Te (0.128 g, 1.0 mmol), NaH (0.053 g, 2.2 mmol, 60% suspension in oil, washed with hexane) and dry DMF (3 mL) is heated at 140°C for 1 h. Within 0.5 h the initial deep red colour is lost, and a pale yellow suspension is obtained. After cooling at room temperature, the aryl iodide (2.0 mmol) in dry DMF (3 mL) is added and the mixture heated at 130°C for 24 h. After cooling at room temperature, the mixture is quenched with 10% aqueous NH4HSO4 (10 mL) and extracted with ether (10 mL). The ethereal extract is washed with H2O, dried (Na2SO4) and evaporated, giving the telluride, which is purified by column chromatography on SiO2 (eluent/hexane). The Rongalite method (see Section 3.1.1.1b,i) can be successfully applied to the preparation of diaryl tellurides from aryl iodides.5,6 This method seems to be advantageous compared to the preceding one because of the higher yields and milder experimental conditions.
Te
HOCH2SO2NA NaOH/H2O
Na2Te
ArI DMF, 60°C, 10 h (55 - 94%)
ArTeAr
Ar = Ph and (alkyl and methoxy) derivatives, 1-naphthyl, 2 -naphthyl and derivatives, 9 -anthryl, 9 -phenanthryl, 1-pyrenyl
Some concurrent reactions sometimes observed in the above methods (dehydrohalogenation with the tellurium/Rongalite method and formation of tellurocarbamates RTeC(O)NMe2 with the tellurium/NaH/DMF method) that decrease the yields of the desired tellurides can be avoided by a modified procedure, where sodium telluride is generated by heating elemental tellurium and NaH in NMP.7 The deep purple solution of the reagent prepared under these conditions can be stored for many days (in contrast to the use
20
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
of DMF as the solvent) without appreciable degradation. NaH /NMP 100 -110°C, 1 h
ArI ArTeAr NMP, 50 -110°C, 2-24 h (42-77%) Ar = Ph and (alkyl and methoxy) derivatives, 1-naphthyl, 2-naphthyl, 1-(2-methyl)naphthyl
Te
Na2Te
Di(1-naphthyl) telluride (typical procedure).7 Finely ground Te (0.140 g, 1.1 mmol) and NaH (2.2 mmol, 60% suspension in oil, washed with hexane) are heated in NMP (3.5 mL) for 1 h. 1-Iodonaphthalene (0.310 g, 1.2 mmol) is added in small portions over 1.5 h to the obtained solution of Na2Te at 100°C under argon. The resulting mixture is kept at this temperature for 19 h. During this period the colour of the solution gradually changes from deep purple to black. The progress of the reaction is monitored by TLC. After complete disappearance of the starting material the reaction is quenched by addition of saturated aqueous NH4Cl (1 mL) followed by benzene (5 mL). The Te deposit is filtered off and the filtrate is partitioned between EtOAc (30 mL) and H2O (20 mL). The organic phase is separated and dried (Na2SO4), the solvent is evaporated and the residue chromatographed over SiO2 (eluent/hexane), giving the telluride. The product is recrystallized from hexane/ CHCl3 (1:1) as yellow crystals (0.160 g (76%); m.p. 123–126°C). 3.1.2.2
From sodium telluride or sodium O,O-diethyl phosphorotellurolate and arenediazonium fluoroborates
Sodium telluride and sodium O,O-diethyl phosphorotellurolate, prepared respectively by the Te/NaBH4DMF method and by the reaction of elemental tellurium with NaH and O,O-diethyl phosphate in ethanol, react with arenediazonium fluoroborates, giving good yields of diaryl tellurides.8 Te
(method A) NaBH4 DMF, 100°C
(method B)(EtO)2P(O)H NaH /EtOH, r.t.
Na2Te
[ArN2+]BF4DMF, 0-5°C, 30min (59 - 72%)
(EtO)2P(O)TeNa
ArTeAr
[ArN2+]BF4DMF, r.t. (64 - 94%)
A = Ph and (alkyl, methoxy, halo and acyl) derivatives
Di(p-tolyl) telluride (typical procedure).8 Method A. Elemental Te (0.65 g, 5 mmol) and NaBH4 (0.45 g, 12 mmol) in DMF (15 mL) are heated in a Schlenk reactor at 100°C with stirring and under N2 until disappearance of the Te powder. The solution is cooled at 0°C and p-toluenediazonium fluoroborate (2.06 g, 10 mmol) in DMF (5 mL) is added dropwise. The mixture is stirred at 0°C for 30 min, quenched with H2O (20 mL) and then stirred continuously for 30 min. The mixture is filtered, the filtrate extracted with ether (3⫻15 mL) and the extracts washed with H2O (3⫻15 mL) and dried (MgSO4). The solvent is evaporated and the residue recrystallized from MeOH, giving the telluride (1.05 g (68%); m.p. 67°C). Method B. Elemental Te (0.64 g, 5 mmol), NaH (0.30 g, 10 mmol, 80% oil suspension, washed with hexane) and (EtO)2P(O)H (1.41 g, 10 mmol, 97%) in anhydrous EtOH
3.1 DIORGANYL TELLURIDES
21
(20 mL) are stirred in a Schlenk apparatus at room temperature under N2 until disappearance of the Te powder. p-Toluenediazonium fluoroborate (2.27 g, 11 mmol) in DMF (5 mL) is added slowly and the whole stirred for 30 min. The solution is diluted with H2O, extracted with ether (3⫻15 mL) and the extract dried (MgSO4) and evaporated. The residue is recrystallized from MeOH, giving the telluride (1.38 g (89%); m.p. 67°C). 3.1.2.3
From potassium tellurocyanate and arenediazonium fluoroborates
Another method that uses arenediazonium fluoroborates to prepare diaryl tellurides is the reaction with potassium tellurocyanate.9 Aryl tellurocyanides are postulated as intermediates.
2KTeCN + 2ArN2+]BF4-
DMSO, r.t. -N2, -2KBF4
[2ArTeCN] (41-47%)
ArTeAr + Te(CN)2 Te + (CN)2
Ar = alkyl, methoxy, nitro, cyano, halophenyl derivatives, 2 - biphenyl
Diaryl tellurides (general procedure).9 Finely ground Te (1.6 g, 12.5 mmol) and KCN (0.82 g, 12.5 mmol) in dry DMSO (20 mL) are heated at 100°C, for 1 h under N2. After all the Te has dissolved, the mixture is cooled in an ice bath until most of the solvent has solidified. The diazonium fluoroborate (12.5 mmol) is added rapidly while a brisk stream of N2 is passed into the system. When the initial violent gas evolution has ceased, the ice bath is removed and stirring is continued at room temperature for 3 h. The mixture is diluted with CH2Cl2 (250 mL), filtered from the dark insoluble material (Te) and washed several times with H2O. The solution is dried (CaCl2) and evaporated, giving an oil or a pasty-solid, which is dissolved in CH2Cl2 and filtered through a short SiO2 column. (ln the few cases where aryl tellurocyanides are formed as by-products, more careful chromatography is required with CH2Cl2/hexane, 1:1 as the eluent.) The small amounts of diaryl ditellurides formed frequently as by-products can be converted into tellurides by treatment with copper powder in refluxing dioxane.10 For Ar⫽2HO2CC6H4, the crude product is extracted with aqueous Na2CO3 and precipitated with acid (yield 8%). 3.1.2.4
From tellurium(IV) halides and arylmagnesium halides
In this method, the electrophilic tellurium tetrachloride is employed as starting material to introduce tellurium in organic substrates, in contrast to the preceding methods using nucleophilic tellurium species. Tellurium tetrachloride (as well as tellurium tetrabromide and tellurium tetraiodide) reacts with 4 mol equiv of arylmagnesium bromide, giving rise to diaryl tellurides in high yields.11,12
TeX4 + 4ArMgBr
ether /benzene 0°C, reflux (>90%)
ArTeAr + ArAr + 4MgBrX
Ar = Ph; X = Cl, Br, I Ar = 1-naphthyl, o -MeC6H4, p -MeC6H4; X = Br
22
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
The intermediates in these reactions are the corresponding triaryltelluronium halides (which react with an additional equivalent of Grignard reagent) or the unstable tetraaryltellurium derivatives. TeX4 + 3ArMgX
[Ar3Te+]X-
TeX4 + 4ArMgX
[Ar4Te]
ArMgX
ArTeAr + ArAr
This method is an efficient modification of the early method of Lederer,13 employing tellurium dihalides (unstable compounds which disproportionate in elemental tellurium and tellurium(IV) halides). To make the isolation and purification of the products easier, the obtained tellurides are converted in situ into the corresponding dichlorides, dibromides or diiodides by treating, respectively, with sulphuryl chloride, bromine or iodine.11,12 Diphenyl telluride (typical procedure).12 To an ethereal solution of a Grignard reagent (100 mL), prepared from bromobenzene (39.3 g, 0.25 mol) and Mg (6.1 g, 0.25 mol), benzene (100 mL) is added. The solution is cooled at 0°C and TeCl4 (13.5 g, 0.05 mol) in benzene (200 mL) is added slowly with vigorous stirring. The reaction mixture is refluxed for 2 h, then cooled at 0°C and quenched with saturated aqueous NH4Cl (300 mL). The organic layer is separated, washed with H2O (3⫻), dried (Na2SO4) and evaporated in a rotatory evaporator, giving the crude telluride. Treatment of the crude telluride with Br2 gives diphenyltellurium dibromide (20 g (91%); m.p. 197°C). 3.1.2.5
From elemental tellurium and diarylmercury compounds
The reaction of diarylmercurials with elemental tellurium under heating, one of the oldest methods for the preparation of diaryl tellurides,14–16 has been later employed in some specific cases.17–19 Ar2Hg + 2Te
3.1.2.6
>200°C
ArTeAr + TeHg
From diaryl ditellurides by extrusion of a tellurium atom
Diaryl ditellurides are relatively thermolabile compounds and eliminate one tellurium atom by heating at ~300°C.20,21 In the presence of copper metal, however, the extrusion of tellurium is achieved during reflux with toluene or dioxane.10,22–24 ArTeTeAr
~300°C -Te
Cu toluene, dioxane, reflux (70 - 90%)
ArTeAr (Ar = Ph, p -MeOC6H4, p -EtOC6H4) ArTeAr
Ar = p -MeC6H4, m -MeOC6H4, p -FC6H4, m -BrC6H4, p -NO2C6H4, p -Me3SiC6H4, 4 - biphenyl, [2 - (2 - quinolylphenyl)]
REFERENCES
23
Bis(2,4,6-trimethylphenyl) telluride (typical procedure).24 A solution of bis(2,4, 6-trimethylphenyl) ditelluride (4.94 g, 10 mmol) in toluene (150 mL) is refluxed in the presence of electrolytic Cu (1.40 g, 22 mmol) for 12 h. The mixture is filtered and the filtrate evaporated to give the pure telluride (m.p. 123–125°C). 3.1.2.7
Bis-(phenylethynyl) telluride as Te2+ equivalent
On the basis that bis-organyl tellurides undergo Te/Li exchange by treatment with an organolithium reagent, if a thermodynamically more stable organolithium moiety is released,25 bis-(phenylethynyl) telluride26 has been employed as starting material for the synthesis of diaryl tellurides.27 2ArBr
t - BuLi
2ArLi
Ph CTeC Ph ArTeAr -2PhC CLi (75 - 100%) THF, -78°C
Ar = Ph, p - Me2NC6H4, p - MeOC6H4, p - HOC6H4, p -MeC6H4, m - MeC6H4, o,m-Me2C6H3, o,p,o - Me3C6H2, 2 - thienyl, p - F3CC6H4, 2 - thianapftenyl
REFERENCES 1. Sandman, J. D.; Stark, J. C.; Acampora, L. A; Gagne, P. Organometallics 1983, 2, 549. 2. Sandman, D. J.; Stark; J. C.; Rubner, M.; Acampora, L. A.; Samuelson, L. A. Mol. Cryst. Liq. Cryst. 1983, 93, 293. 3. Acampora, L. A.; Dugger, D. L.; Emma, T.; Mohammed, J.; Rubner, M. F.; Samuelson, L.; Sandman, D. J.; Tripathy, S. K. Polym. Electron. 1984, 36, 461. 4. Sandman, D. L.; Stark, J. C.; Acampora, C. A.; Samuelson, C. A.; Allen, G. W. Mol. Cryst. Liq. Cryst. 1984, 107, 1. 5. Suzuki, S.; Padmanabhan, S.; Inouye, M.; Ogawa, T. Synthesis 1989, 468. 6. Suzuki, H.; Inouye, M. Chem. Lett. 1985, 389. 7. Suzuki, H.; Nakamura, T. Synthesis 1992, 549. 8. Li, J.; Lue, P.; Zhan, X. Synthesis 1992, 281. 9. Engman, L. J. Org. Chem. 1983, 48, 2920. 10. Sadekov, T. D.; Bushkov, A. Y.; Minkin, V. T. J. Gen. Chem. USSR 1973, 43, 815. 11. Rheinboldt, H.; Petragnani, N. Chem. Ber. 1956, 89, 1270. 12. McWhinnie, W. R.; Patel, M. G. J. Chem. Soc. Dalton Trans. 1972, 199. 13. (a) Lederer, K. Bericht 1915, 48, 1345, 2049. (b) Lederer, K. Bericht 1916, 49, 334, 345, 1071, 1076, 2002, 2532, 2663. (c) Lederer, K. Bericht 1917, 50, 238. (d) Lederer, K. Ber. Dtsch. Chem. Ges. 1919, 52, 1989. (e) Lederer, K. Bericht 1920, 53, 712. 14. Kraft, F.; Lyons, R. E. Bericht 1896, 27, 1769. 15. Zeiser, F. Bericht 1895, 28, 1760. 16. Lyons, R. E.; Bush, G. H. J. Am. Chem. Soc. 1908, 30, 834. 17. Hellwinkel, D.; Farbach, G. Tetrahedron Lett. 1965, 1823. 18. Cohen, S. C.; Reddy, M. L. N.; Massey, A. G. J. Organomet. Chem. 1968, 11, 563. 19. Jones, C. W. H.; Sharma, R. D.; Naumann, D. Can. J. Chem. 1986, 64, 987. 20. Farrar, W. V. Research 1951, 4, 177. 21. Petragnani, N.; Moura Campos, M. Chem. Ber. 1961, 94, 1759. 22. Haller, W. S.; Irgolic, K. J. J. Organomet. Chem. 1972, 38, 97.
24
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
23. Sadekov, I. D.; Bushkov, A. Y.; Minkin, V. I. J. Gen. Chem. USSR 1977, 47, 576. 24. Akiba, M.; Lakshmikantham, M. V.; Jen, K. Y.; Cava, M. C. J. Org. Chem. 1984, 49, 4819. 25. Hiiro, T.; Kambe, N.; Ogawa, A.; Miyoshi, N.; Murai, S.; Sonoda, N. Angew. Chem. Int. Ed. Engl. 1987, 26, 1187. 26. The synthesis of bis(phenylethynyl) telluride, isolated as the corresponding diiodide, was described at first by Moura Campos, M.; Petragnani, N. Tetrahedron 1962, 18, 527. And later by Dabdoub, M. J.; Comasseto, J. V.; Braga, A. L. Synth. Commun. 1988, 18, 1979. See Section 3.17.2.2. 27. Engman, L.; Stern, D. Organometallics 1993, 12, 1445.
3.1.3 Unsymmetrical tellurides Unsymmetrical tellurides comprise a large class of organotellurium compounds characterized by two different alkyl groups, one alkyl and one aryl group, or two different aryl groups linked to a tellurium atom. These compounds find only a minor use as reagents in organic synthesis, but because of structural, and in some cases biological interest, their preparation will be discussed in the following sections.
3.1.3.1
From sodium telluride and two different alkyl halides
Te
NaBH4 H2O
Na2Te
(1) RX, (2) R1X EtOH /THF
RTeR1 (+ RTeR + R1TeR1) (25%) (25%) (25%)
R = n -Bu, n - octyl, p - IC6H4(CH2)9, CH C(CH2)3, ICH CH(CH2)3 R1 = (CH2)nCO2Me
Unsymmetrical telluro-substituted fatty esters (of biological interest) are obtained in about 40% yield after chromatographic separation from the symmetrical tellurides.1 n-Octyl (7-carbomethoxy)heptyl telluride (typical procedure).1 To a suspension of elemental Te (0.127 g, 1 mmol) in H2O (3 mL) heated at 80°C is added a solution of NaBH4 (0.100 g, 2.64 mmol) in H2O (1 mL), under red light, after careful deaeration and argon purge. The obtained clear solution of Na2Te is cooled at room temperature and a solution of methyl 8-bromooctanoate (0.223 g, 0.95 mmol) and 1-bromooctane (0.202 g, 1.05 mmol) in THF/EtOH (1:1, 15 mL) is added under argon. The solution is stirred for 1 h, poured into H2O (150 mL) and then extracted with ether (3⫻50 mL). The ether extracts are washed with H2O (3⫻50 mL), dried (Na2SO4) and evaporated under vacuum. The crude product is dissolved in petroleum ether (30–60°C) and purified by column chromatography on SiO2 slurried with petroleum ether (elution with 10⫻25 mL aliquots of petroleum ether followed by 10⫻25 mL aliquots of benzene, monitoring the fractions by TLC). By combination of aliquots 13–16 the telluride is obtained as an oil (0.155 g (39%)).
3.1 DIORGANYL TELLURIDES
25
Aryl alkyl tellurides are prepared in medium yields by sequential arylation/alkylation of Na2Te generated by the described Te/NaH/NMP system (see Section 3.1.2.1).2 Te
NaH NMP, 100 - 110°C, 1 h
Na2Te
ArI (0.5 equiv) NMP, 120°C, 2 - 4 h
[ArTe-]
Ar = o - MeC6H4, 1-naphthyl; R = n - hepthyl Ar = 2- naphthyl; R = Me
RX NMP, 50°C, 2 h (52 - 67%)
ArTeAr
Methyl 2-naphthyl telluride (typical procedure).2 2-Iodonaphthalene (0.150 g, 0.59 mmol) is added dropwise to a stirred solution of Na2Te (1.3 mmol) in NMP (4 mL) and the mixture is heated at 120°C for 5 h. An excess of MeI (0.40 mL, 4.3 mmol) is then added and the resulting mixture is stirred at 50°C for 2 h. Usual work-up gives the telluride as pale yellow crystals (0.110 g (67%); m.p. 59–60°C). 3.1.3.2
From organyl tellurolates and alkylating agents
(a) From organyl tellurolates generated by tellurium insertion in organomagnesium or organolithium reagents The magnesium aryl tellurolates described earlier 3 have seldom been employed for the preparation of unsymmetrical tellurides.4–6 Te + ArMgBr
ArTeMgBr
RX
ArTeR
Ar = Ph; R = Et, H2C-C CH Ar = o-MeS-, o-Me2N, o-ClC6H4; R = Me (68-92%)
Elemental tellurium also inserts easily into a C(sp2)–Mg bond of a vinyl or styryl Grignard reagent (see Section 3.16.1.4), but is unaffected by alkylmagnesium halides.7 In contrast, tellurium insertion in alkyl- or aryllithium compounds followed by alkylation is a useful method for the synthesis of unsymmetrical tellurides. (For a tabulation of unsymmetrical tellurides prepared by alkylation of organyl tellurolates, see ref. 8.) Te + RLi Te + ArLi
1 RTeLi R X
ArTeLi RX
RTeR1 ArTeR
Methyl (3-hydroxy)propyl telluride (typical procedure).9 MeTeLi. A suspension of Te powder (12.8 g, 0.1 mol) in THF (100 mL) is frozen in a liquid N2 bath, and then MeLi (66.7 mL of a 1.5 M solution in ether, 0.1 mol) is injected into the flask. The mixture is allowed to thaw and is stirred magnetically for a further 30 min at room temperature. The resulting yellow-orange solution is stored under N2 and used within 2 h. MeTe(CH2)3OH. 3-Bromopropan-1-ol (6.95 g, 50 mmol) is injected into a frozen (by liquid N2) solution of MeTeLi (50 mmol). The mixture is allowed to thaw and is stirred magnetically at room temperature for about 1 h. Aqueous NaCl (100 mL) is then added and the aqueous layer extracted several times with ether. The combined organic phases are dried
26
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
(MgSO4) for 16 h, and evaporated. The residue is chromatographed on an SiO2 column (elution with petroleum ether 40–60°C), giving the telluride (8.3 g (83%)) in acceptable purity. Methyl phenyl telluride (typical procedure).10 To a well-stirred suspension of Te powder (3.0 g, 24 mmol) in anhydrous THF (36 mL) under argon is added dropwise an equimolar amount of PhLi (1.5–2.0 M in ether). The mixture is then stirred for 2 h at room temperature, and for 1 h under reflux, and then MeI (3.4 g, 24 mmol) is added. After refluxing for 0.5 h the mixture is poured into three volumes of H2O, the aqueous layer is extracted with CH2Cl2, and the combined organic phases are washed with H2O, dried (Na2SO4) and evaporated. The oily brown residue is distilled under vacuum, giving the telluride (2.1 g (43%); b.p. 57–58°C/0.7 torr). (b) From organyl tellurolates generated by the cleavage of ditellurides with alkali metals or reducing agents The reductive fission of diaryl ditellurides with sodium in liquid ammonia reported earlier11 has seldom been employed.12,13 More recently, aprotic solvents have been substituted for ammonia.14–16 A practical and successful method employs lithium in THF.17 ArTeTeAr
Li THF
ArTeLi
RX
ArTeR
Ar = Ph; R = Me, Et, n -Pr, n -Bu, n -C14H29 (62-84%) R = i -prop (46%)
Alkyl phenyl tellurides (general procedure).17 Li metal (1.4 g, 0.2 mol) in small pieces is added under N2 to a solution of diphenyl ditelluride (4.1 g, 10 mmol) in dry THF (100 mL). The mixture is stirred at room temperature for 6 h, unreacted lithium is removed using a spatula and the alkyl halide (20 mmol) neat or in THF is added dropwise to the stirred yellowish-brown solution. The solution is stirred at room temperature for 30 min, and under reflux for an additional 30 min. The solvent is evaporated, and H2O (10 mL) and ether (25 mL) are added to the residue, mixing thoroughly. The ethereal phase is separated and evaporated. The residue is fractionally distilled under vacuum (yields 62–79%). Actually, the method of choice for the preparation of organyl tellurolate anions is the reduction of diorganyl ditellurides with reducing agents. NaBH4 is the more widely used reagent owing to the mild experimental conditions. The choice of solvent, or solvent mixture, and of neutral or basic media is governed by the further use of the tellurolate solution. Typical media are benzene/ethanol/aqueous NaOH,18 MeOH or EtOH.19–21
ArTeTeAr (RTeTeR)
NaBH4 EtOH (MeOH)
ArTeNa (RTeNa)
R1X
ArTeR1 (RTeR1)
Medium-to-high yields of the expected tellurides are obtained from diaryl or dialkyl ditellurides and n- and s-alkyl halides (and steroidal tosylates).
3.1 DIORGANYL TELLURIDES
27
Reactions with epoxides are also successful, giving the corresponding hydroxy tellurides.19 ArTeNa + R
O
R R
OH
ArTe R
Phenyl dodecyl telluride (typical procedure).19 To a solution of diphenyl ditelluride (1.21 g, 2.96 mmol) in absolute EtOH (100 mL) is slowly added powdered NaBH4 (0.23 g, 6.08 mmol) under N2 at room temperature. At the end of the addition the red colour is discharged and 1-bromododecane (1.5 g, 6.02 mmol) is added by a syringe. The mixture is refluxed for 3.5 h (during this period the progress of the reaction is monitored by TLC; the plates are developed in the dark) and then evaporated. The residue is purified by chromatography on SiO2 (eluting with CCl4), giving the telluride (1.73 g (76%)). Diaryl ditellurides, like diaryl disulphides and diselenides,22 undergo disproportionation into arene tellurolates and tellurinates by alkaline treatment. 2ArTeTeAr + 4OH-
3ArTe- + ArTeO2- + 2H2O
The tellurolate anion formed can be alkylated in situ, giving alkyl aryl tellurides, if the above reaction is effected in the presence of a phase transfer catalyst.23 Otherwise, performing the reaction in the presence of the reducing agent TUDO a telluride yield near to quantitative is generated, owing to the reduction of the aryl tellurinate anion to aryl tellurolate.24 2ArTeTeAr + 4OH-
PTC
3ArTe- + ArTeO2- + 2H2O TUDO
ArTe- + RX
(81-96%)
ArTeR
Ar = Ph, 2-naphthyl, p -MeOC6H4, m-F3CC6H4 R = n- and s-alkyl, benzyl
Alkyl aryl tellurides (general procedure).24 To a solution of diaryl ditelluride (1.0 mmol) in THF (7.5 mL) are added TUDO (0.108 g, 1.0 mmol), 2HT (0.030 g) and the alkyl halide (2.0 mmol). Then, 50% NaOH (7.5 mL) is added and the mixture is stirred vigorously for several hours at room temperature. The phases are separated, and the organic phase is extracted with EtOAc (3⫻20 mL). The combined organic phases are washed with H2O, dried (MgSO4) and evaporated. The residue is purified by column chromatography on SiO2 (eluting with EtOAc). Aryl ditellurides are cleaved by samarium diiodide (SmI2) to generate the new nucleophilic species diiodosamarium aryl tellurolate which reacts smoothly with alkyl and acyl
28
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
halides, and even with aryl halides to afford the corresponding tellurides and telluroesters.25–27 ArTeTeAr + 2SmI2
THF/HMPA r.t., 0.5 h, 1 h
2 "ArTeSmI2"
ArTeR
RCOCl r.t., 2 h
CN X C C H Y THF, r.t., 3h
ArTe
RX r.t., THF, 3 h
ArTeCOR (77, 72%)
CN C C H Y (64-85%)
Ar = Ph X = Br, I R = Me, Et, prop, n -Bu i -propyl, PhCH2
Ar = Ph, p -MeC6H4 R = Ph
Ar = Ph, p -MeC6H4 X = Cl, Br Y = CN, CO2Et
Reaction of diphenyl ditelluride with organic halides mediated by SmI2.25 Samarium powder (0.20 g, 1.3 mmol) was placed in a well-dried, two-neck, round-bottom flask containing a magnetic stirrer bar. The flask was flushed with nitrogen several times. Methylene diiodide (0.32 g, 1.2 mmol) in THF (7 mL) was added through a rubber septum by a syringe. The mixture was stirred at room temperature until the solution became deep green and homogeneous (0.5–1 h). HMPA (0.7 mL) was then added and the solution became deep purple; the THF-HMPA solution of SmI2 was ready for subsequent use. To the THF-HMPA (7–0.7 mL) solution of SmI2 (1.2 mmol), prepared as described above, was added a mixture of ditelluride (0.21 g, 0.5 mmol) and organic halide (1 mmol) in THF (7 mL) at room temperature, and the solution was stirred for 5 h, during which time its colour changed into brownish-yellow. The reaction solution was poured into diluted HCl, and the mixture was extracted with ether (2⫻15 mL). The ethereal solution was treated with aqueous Na2S2O3, washed with brine, and dried (MgSO4). Evaporation of the solvent left a yellow oil that was subjected to preparative TLC on silica gel (petroleum ether as eluent), giving the phenylalkyl tellurides. Diisobutylaluminium benzenetellurolate, generated in situ from diphenyl ditelluride and diisobutylaluminium (DIBAL), reacts with acetals, alkyl sulphonates and oxiranes, giving the expected tellurides in high yields.28
(i-Bu)2AlTePh
RCH(OMe)2
CH2Cl2
re
OMe TePh R = H, C11H23 (42-80%)
RCH
r.t. flu
x
C11H23CH
TePh TePh
(50%) C6H13OMs(OTs)
OMs ( )11
same condition
same condition
C6H13TePh (72%) TePh ( )11 (46%)
3.1 DIORGANYL TELLURIDES
29
OH
O
same condition
RCHCH2TePh (70-88%)
R R = Me, Et, C12H25 O ( )n
OH
same condition
( )n TePh
n = 4, 10
(c)
(80%)
From organyl telluroesters generated by the reduction of organyltellurium trichlorides with NaBH4
The reaction of organyltellurium trichlorides with NaBH4 followed by the in situ treatment of the generated tellurolate with alkyl halides is a useful method to prepare several types of unsymmetrical telluride.29 NaBH4 RX ArTeR ArTeNa THF/H2O THF/N2 (88-95%) 0°C Ar = Ph, p -MeOC6H4, p -C6H5OC6H4 RX = MeI, EtBr, Me(CH2)2CH(Me)Br
ArTeCl3
Transformation of aryltellurium trichlorides into alkyl aryl tellurides (typical procedure).29 To a solution of the aryltellurium trichloride (5 mmol) and the appropriate alkyl halide (7.5 mmol) in THF (60 mL) under a nitrogen atmosphere, was slowly added a solution of NaBH4 (0.93 g, 25 mmol) in water (30 mL) at 0°C. The colour changed from yellow to red when the addition of NaBH4 started and to yellow again after the addition was completed. After the addition, the mixture was stirred for 20 min at room temperature and then treated with saturated aqueous solution of NH4Cl (100 mL) and extracted with ethyl acetate (3⫻20 mL). The extracts were washed with brine (3⫻20 mL) dried with MgSO4 and the solvents were evaporated. The residue was purified by column chromatography on silica gel, eluting with hexane, to give the aryl–alkyl tellurides. Vinylic30 and cyclic organyltellurium trichlorides31 undergo similar reactions. R Cl
R1
1) NaBH4
TeCl3
THF/ H2O 2) EtBr /N2
Cl
R = Ph; R1 = Ph, Me R2 R1 ( )n R
O
R1
R
TeEt
(78, 75%)
1) NaBH4 TeCl3 THF / H O 2 2) n-BuBr
n=1
R, R1, R2 = H R = i -prop; R1, R2 = Me
n=2
R, R1, R2 = H
R2 R1 ( )n R
TeBu-n O (90-95%)
30
3.1.3.3
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
By addition of aryl tellurolates to electrophilic alkenes
Aryl tellurolates add to alkenes bearing electron-withdrawing groups in a typical 1,4-Michael addition, giving -telluro-substituted derivative.32 R Y
PhTeNa /EtOH (PhTe)2 /NaBH4 (31-71%)
R
PhTe Y
R = H, Me; Y = CO2Et, CN
THF Te + RLi r.t., N2
EtOH [RTeLi] r.t.
[RTeH]
R1 R2
EWG RTe R1 2 R
R = Bu, s - Bu EWG = CN, CHO, COR, CO2R R1, R2 = H R1 = H; R2 = Me, cyclohexenone, 4,4 - dimethyl cyclohexenone
EWG
(98%)
3.1.3.4 From organyl tellurolates and arylating agents The arylation of organyl tellurolates, restricted first to aryl halides activated by electronwithdrawing groups,24 or requiring special conditions such as heating in HMPA in the presence of CuI,33 or photostimulation in liquid ammonia,12,13 has later been achieved successfully with non-activated aryl halides under normal conditions.6 PhTeTePh
1) NaBH4 /HMPA, 70 - 80°C
2) CuI, 3) ArI (80 - 90%) Ar = nitroaryl
PhTeTePh
RLi + Te
Na/ NH3
ArX UV
PhTeNa
RTeLi
ArX
PhTeAr
[ref. 33]
PhTeAr
(ref. 12,13)
RTeAr (R = Me, Ph)
(ref. 6)
Methyl o-methoxyphenyl telluride (typical procedure).6 To a frozen solution of MeTeLi (50 mmol) is added o-bromoanisole (9.3 g, 50 mmol). The mixture is allowed to warm at room temperature, stirred for 1.5 h and then quenched with deoxygenated H2O (100 mL). The organic product is extracted with ether (3⫻50 mL), the organic extracts dried (MgSO4) for 16 h and evaporated, and the residue is distilled under vacuum, giving the telluride as a pale yellow oil (9.3 g (74%)). Arenediazonium salts34,35 as well as arenesulphonylazo compounds36 have also found a use as arylating agents for arene tellurolates. ArTeTeAr
NaBH4 EtOH/THF /NaOH aq.
PhTeLi + ArN = NSO2C6H4CH3
ArTeNa
[Ar1N2+]X-
18- crown- 6 MeCN, r.t.
PhTeAr
ArTeAr1
3.1 DIORGANYL TELLURIDES
31
Reaction of diarylditellurides with arenediazonium salts (typical procedure). p-Methoxy phenyl p-tolyl telluride.35 With heating and stirring in an atmosphere of nitrogen, sodium tetrahydroborate was added in small portions to a solution of 9.4 g of bis(p-methoxyphenyl) ditelluride in a mixture of 50 mL of ethanol and 15 mL of benzene until the solution was decolourized completely (1.5 g was required). Then 8.24 g of p-toluenediazonium fluoroborate was added rapidly and the mixture was stirred for 1 h and poured into dilute HCl. The oil formed was extracted with ether, and the extract was washed with water and dried over CaCl2. Ether was evaporated, and the residue was dissolved in benzene and chromatographed on alumina (eluent hexane). After the evaporation of hexane, 4.8 g (36%) of the telluride was isolated, m.p. 64–64.5°C (hexane). Trimethylsylilmethyl telluride generated in situ from methyllithium and trimethylchlorosilane can be used instead of the tellurolate in the latter reaction.36 MeTeLi + Me3SiCl
3.1.3.5
MeTeSiMe3
ArN = NSO2C6H4CH3
MeTeAr
From diorganyl ditellurides or arenetellurenyl halides and organometallic reagents
A different approach to unsymmetrical diorganyl tellurides, in which an electrophilic tellurium species is used, involves the nucleophilic attack of organomagnesium or organolithium reagents to diorganyl ditellurides. RTeTeR + R1Met R aryl aryl, alkyl alkyl
RTeR1 + RTeMet
R1
Met
aryl alkyl alkyl
MgX, Li MgX, Li Li
(ref. 37, 39) (ref. 39, 40) (ref. 38, 6)
Only half of the tellurium of the starting ditelluride is converted into telluride. The other half, converted into tellurolate, can be oxidatively recovered as the starting ditelluride. If the diaryl ditelluride is previously converted in situ into the corresponding tellurenyl halide, both the electrophilic tellurium moieties are used.41 (The stable crystalline 2-naphthyltellurenyl iodide42 (see Section 3.7) reacts similarly.) The reaction is of general application, giving high yields of the expected tellurides with aromatic, aliphatic, cycloaliphatic, vinylic43 and acetylenic Grignard reagents,44 under mild conditions. ArTeTeAr
X2 THF/benzene
[ArTeX]
RMgX (>90%)
ArTeR
Ar = Ph, p -Me, p-MeO, p-EtOC6H4 R = Ph, n-Bu, cyclohexyl, PhC C ; X = Br, I
Unsymmetrical diorganyl tellurides (general procedure).41 A solution of the ditelluride (2 mmol) in THF (30 mL) is treated dropwise at 0°C under N2 with Br2 (0.32 g, 3 mmol)
32
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
in benzene (4 mL). The Grignard reagent is then added dropwise by means of a syringe. Gradual disappearance of the red colour of the solution is observed. Finally, the solution becomes almost colourless after the addition of a 10% excess of the Grignard reagent. After stirring for 30 min at room temperature the solution is diluted with petroleum ether 30–60 C (30 mL) and treated successively with aqueous NH4Cl and brine. The organic layer is dried (MgSO4) and evaporated, giving the telluride. 3.1.3.6
Additional methods
(a) From dialkyl ditellurides and arenediazonium fIuoroborates45
RTeTeR
[ArN2+]BF4CHCl3(CH2Cl2), KOAc, 18-crown-6 (25 - 48%)
ArTeR
R = Et Ar = 2-halC6H4, 2-MeC6H4, 3-MeC6H4, 4-MeC6H4, 2-AcC6H4, 2-CO2HC6H4
(b) From diaryl ditellurides and dialkylmercury reagents46,47 ArTeTeAr + R2Hg
dioxane / reflux -Hg (70-80%)
2 ArTeR
Ar = Ph R = n -C4H9, i -C4H9, Bz
(c) From phenyl tellurocyanate and alcohols48
PhTeTePh
1) NaBH4 2) BrCN
PhTeCN
ROH Bu3P / CH2Cl2
PhTeR (41-78%)
R = n -C8H17, n -C11H23, n -C12H25, n -C14H29, n -C16H33, Ph(CH2)2, Ph(CH2)3, n -C12H25CHCH3
(d) From diphenyl ditellurides and trialkyl boranes49
PhTeTePh
R3B O2 /THF
RTePh (64 -95%)
Selected examples: R = n -C6H13, n -C16H33, c-hex, Br(CH2)5, PhCH2OCO(CH2)4 R3B = n -C6H13B(c-hex)2
REFERENCES
33
(e) From trimethylsylilphenyl tellurium and organyl halides50 Me3SiTePh + RX
MeCN
RTePh + Me3SiX (60-100%)
X = Br R = sec - C10H21, PhCH2, o -ClC6H4CH2, m -ClC6H4CH2, Ph allyl, cinnamyl, c - hex, t - But (36%),
(48%), N
CH2
CH2 ,
N N N
( f ) From arylethynyl tellurides and aryllithium The protocol shown in Section 3.1.2.7 is also useful to prepare unsymmetrical diaryl tellurides.51 ArTe-C
Ph + Ar1Li
THF -78°C
ArTeAr1 + PhC CLi (44-85%)
Ar = p -Me2NC6H4, p -MeOC6H4 Ar1 = Ph, p -MeOC6H4, p -MeC6H4, p -FC6H4, p -F3CC6H4
(g) From aryltellurium tribromides and arylboronic acids52 ArB(OH)2 + Ar1TeBr3
MeNO2 reflux, 30min
Ar Te Ar1 Br Br
NaHSO3
ArTeAr1 (46 - 54%)
Ar = o -NO2C6H4, m -NO2C6H4 Ar1 = m, m -Me2C6H3
(h) From diaryl ditellurides and ethyldiazoacetate53 PhTeTePh
N2CHCO2Et PhTeCH2CO2Et CuSO4, benzene (70%) reflux
REFERENCES 1. 2. 3. 4. 5. 6. 7. 8.
Goodman, M. M.; Knapp Jr., F. F. Organometallics 1983, 2, 1106. Suzuki, H.; Nakamura, T. Synthesis 1992, 549. Giua, M.; Cherchi, F. Gazz. Chim. It. 1920, 50, 362. Bowden, K.; Braude, A. E. J. Chem. Soc. 1952, 1076. Pourcelot, G.; Lequan, M.; Simmonin, M. P.; Cadiot, P. Bull. Soc. Chim. Fr. 1962, 1278. Kemmitt, T.; Levanson, W. Organometallics 1989, 8, 1303. Haller, W. S.; Irgolic, K. J. J. Organomet. Chem. 1972, 38, 97. Irgolic, K. J. in Houben-Weyl-Methods of Organic Chemistry. 4th edn, Vol. E12b, p. 389. Georg Thieme, Stuttgart, 1990.
34
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
9. Hope, E. G.; Kemmitt, T.; Levanson, W. Organometallics 1988, 7, 78. 10. Seebach, D.; Beck, A. K. Chem. Ber. 1975, 108, 314. 11. Lederer, K. Ber. Dtsch. Chem. Ges. 1915, 48, 1345; see also Liesk, J.; Schultz, P.; Klar, G. Z. Anorg. AlIg. Chem. 1977, 435, 98. 12. Pierini, A. B.; Rossi, R. A. J. Organomet. Chem. 1979, 168, 163. 13. Pierini, A. B.; Rossi, R. A. J. Org. Chem. 1979, 44, 4667. 14. Uemura, S.; Fukuzawa, S. I.; Yamauchi, T.; Hattori, K.; Mizutaki, S.; Tamaki, K. J. Chem. Soc. Chem. Commun. 1984, 426. 15. Engman, L. Organometallics 1986, 5, 427. 16. Ohe, K.; Takahashi, H.; Uemura, S.; Sugita, N. J. Organomet. Chem. 1987, 326, 35. 17. Irgolic, K. J.; Busse, P. J.; Grigsby, R. A.; Smith, M. R. J. Organomet. Chem. 1975, 88, 175. 18. Piette, J. L.; Renson, M. Bull. Soc. Chim. Belg. 1970, 79, 353. 19. Clive, D. L.; Chittattu, G. J.; Farina, V.; Kiel, W. A.; Menchen, S. M.; Russel, C. G.; Sing, A.; Wong, C. K.; Curtis, N. J. J. Am. Chem. Soc. 1980, 102, 4438. 20. Knapp, F. F.; Ambrose, K. R.; Callahan, A. P. J. Med. Chem. 1981, 24, 794. 21. Uemura, S.; Fukuzawa, S. J. Am. Chem. Soc. 1983, 105, 2748. 22. Rheinboldt, H. in Houben-Weyl-Methoden der Organischen Chemie (ed. E. Muller). 4th edn, Vol. IX, p. 1102. Georg Thieme, Stuttgart, 1955. 23. Comasseto, J. V.; Ferreira, J. T. B.; Fontanellas, J. A. J. Organomet. Chem. 1984, 277, 261. 24. Comasseto, J. V.; Lang, E. S.; Ferreira, J. T. B.; Simonelli F.; Correia, V. R. J. Organomet. Chem. 1987, 334, 329. 25. Fukuzawa, S. I.; Niimoto, Y.; Fujinami, T.; Sakai, S. Heteroatom. Chem. 1990, 1, 491. 26. Zhang, Y.; Yu, Y.; Lin, R. Synth. Commun. 1993, 23, 189. 27. Bao, W.; Zhang, Y. Synth. Commun. 1995, 25, 1913. 28. Sasaki, K.; Mori, T.; Doi, Y.; Kawachi, A.; Aso, Y.; Otsubo, T.; Ogura, F. Chem. Lett. 1991, 415. 29. Chieffi, A.; Menezes, P. H.; Comasseto, J. V. Organometallics 1997, 16, 809. 30. See Section 3.16.2.1. 31. See Section 4.5.1.1. 32. (a) Ohe, K.; Takahashi, H.; Uemura, S.; Sugita, M. Nippon Kagaku Kaishi 1987, 1469. (b) Zinn, F. K.; Righi, V. E.; Luque, S. C.; Formiga, H. B.; Comasseto, J. V. Tetrahedron Lett. 2002, 43, 1625. 33. Suzuki, H.; Abe, H.; Ohmasa, N.; Osuka, A. Chem. Lett. 1981, 1115. 34. Piette, L.; Thibaut, P.; Renson, M. Tetrahedron 1978, 34, 655. 35. Sadekov, J. D.; Ladatko, A. A.; Minkin, U. I. J. Gen. Chem. USSR 1977, 47, 2194. 36. Evers, M. J.; Christiaens, L. E.; Renson, M. J. J. Org. Chem. 1986, 51, 5196. 37. Petragnani, N. Chem. Ber. 1963, 86, 247. 38. Herberhold, M.; Leitner, P. J. Organomet. Chem. 1987, 336, 153. 39. O⬘Brien, D. H.; Dereu, N., Huang, C. K.; Irgolic, K. J.; Knapp, F. F. Organometallics 1983, 2, 305. 40. Dereu, N.; Piette, I. L. Bull. Soc. Chem. Fr. 1979, 623. 41. Petragnani, N.; Torres, L.; Wynne. K. J. J. Organomet. Chem. 1975, 92, 185. 42. Vicentini, G. ; Giesbrecht E.; Pitombo, L. R. M. Chem. Ber. 1959, 92,40. 43. Dadboub, M.; Dabdoub, V. M.; Comasseto, J. V.; Petragnani, N. J. Organomet. Chem. 1986, 308, 211. 44. Moura Campos, M.; Petragnani, N. Tetrahedron 1982, 18, 527. 45. Luxen, A.; Christiaens, L. Tetrahedron Lett. 1982, 3905. 46. Okamoto, Y.; Yano, T. J. Organomet. Chem. 1971, 29, 99. 47. Vychkova, T. I.; Kalabin, G. A.; Kushnarev, D. F. J. Org. Chem. Russia 1982, 17, 1179. 48. Ogura, F.; Yamaguchi, H.; Otsubo, T.; Chikamatsu, K. Synth. Commun. 1982, 12, 131.
REFERENCES 49. 50. 51. 52. 53.
35
Abe, T., Aso, Y.; Otsubo, T.; Ogura, F. Chem. Lett. 1990, 1671. Yamago, S.; Lida, K.; Yoshida, J. I. Tetrahedron Lett. 2001, 42, 5061. Engman, L.; Stern, D. Organometallics 1993, 12, 1445. Clark, A. R.; Nair, R.; Fronczek, F. R.; Junk, T. Tetrahedron Lett. 2002, 43, 1387. Dabdoub, M.; Guerrero, P. G.; Silveira, C. C. J. Organomet. Chem. 1993, 460, 31.
3.1.4 Diorganyl tellurides by reduction of diorganyltellurium dihalides Diorganyltellurium dihalides are often the primary products in the synthesis of organic derivatives of tellurium and are therefore immediate precursors of the corresponding tellurides. The most employed reducing agents in the “old” tellurium chemistry were alkali sulphites or hydrogen sulphites, methylmagnesium iodide and sodium sulphide hydrate. The last reagent is still used, together with the more recently introduced sodium borohydride, TUDO, hydrazine, samarium diiodide and sodium ascorbate.1 red
RTeR
RTeR
X X
Often the sequence R2Te
X2
R2TeX2
red
R2Te
is employed for isolation and purification purposes, since the dihalides are generally solid, easily recrystallizable compounds, and the two steps cause only a little loss in the telluride yield. Reduction of diorganyltellurium dihalides With sodium sulphide hydrate (general procedure).2 The diorganyltellurium dihalide is mixed with a 15 times molar excess of Na2S·9H2O and the mixture heated at 95–100°C for 10 min or more, until all the solid has melted. Sufficient H2O is added to dissolve the sulphide and then the mixture is filtered if the obtained telluride is a solid, or extracted with a solvent (ether or petroleum ether) if the telluride is a liquid. The products are purified by crystallization or distillation. Yields are high or quantitative (except for diphenyl telluride or di-p-tolyl telluride). With sodium borohydride – tetrahydrotellurophene (typical procedure.3 NaBH4 is added to a boiling methanolic solution of diiodotetrahydrotellurophene until the orange colour disappears. The solution is filtered and the filtrate is poured into H2O (1 L). Extraction with ether, followed by drying (CaCl2) and evaporation, gives the product as a yellow oil with a persistent odour (b.p. 165–167°C/760 mmHg; no yield was given). With TUDO (general procedure).4 A mixture of diorganyltellurium dihalide (2 mmol) and 2 N NaOH (10 mL) is stirred at room temperature for 15 min. TUDO (0.432 g, 4 mmol)
36
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
and petroleum ether (30–60°C, 10 mL) are then added and the two-phase system is stirred at room temperature until the mixture turns clear. The phases are separated and the aqueous phase is extracted with ether (3⫻). The combined organic phases are dried (MgSO4) and the solvent is evaporated. The residue is placed on an SiO2 column and eluted with petroleum ether giving the telluride (dibutyl, didodecyl, butyl phenyl, and di-4-methoxyphenyl telluride; yields 77–90%). With hydrazine – di-p-anisyl telluride (typical procedure).5 p-Anisyltellurium dichloride (8.3 g, 0.02 mol) suspended in EtOH/H2O (150:15) is heated under reflux, and hydrazine (3.2 g, 0.1 mol) is added dropwise (vigorous evolution of N2). When further addition of hydrazine no longer causes evolution of N2, the mixture is poured into H2O (700 mL), and extracted with ether (2⫻300 mL). The extracts are washed with H2O, dried and evaporated, giving the telluride. The product is recrystallized from MeOH (at ⫺25°C) (5.2 g (77%); m.p. 57°C). 3.1.5 Additional methods Sodium ascorbate6 and samarium diiodide7 have also been used as reducing agents. Reduction of diaryltellurium dichlorides with sodium ascorbate (typical procedure).6 Bis (p-methoxyphenyl)tellurium dichloride (0.20 g, 0.48 mmol) dissolved in acetone (10 mL) was added to a stirred solution of sodium ascorbate (0.20 g, 1.0 mmol) in water/methanol (2⫹8 mL). After 24 h, water (50 mL) and CH2Cl2 (50 mL) were added and the two phases separated. The organic phase was dried (CaCl2) and the solvent evaporated in vacuo. Flash chromatography yielded 0.14 g (84%) of bis(p-methoxyphenyl) telluride. Reduction of diaryltellurium dichlorides with samarium diiodide (typical procedure).7 Diaryl tellurium dichloride (1 mmol) was added to the deep blue solution of SmI2 (2.2 mmol) in THF (22 mL) at room temperature under nitrogen with stirring. The deep blue colour of the solution disappeared immediately and became yellow. The resulting solution was stirred at room temperature under nitrogen for 30 min. To the solution was added dilute hydrochloric acid, and the mixture was extracted with ether. The ethereal solution was washed with brine and dried over MgSO4. The solvent was evaporated in vacuo, and the residue was purified by preparative TLC on silica gel (petroleum ether–methylene dichloride as eluent).
REFERENCES 1. For an extensive coverage on the reduction of diorganyltellurium dichloride see: Rheinboldt, H. in Houben-Weyl-Methoden der Organishen Chemie (ed. E. Muller). 4th edn, Vol. IX, p. 1068. Georg Thieme, Stuttgart, 1955. Irgolic, K. J. in Houben-Weyl-Methods of Organic Chemistry. 4th edn, Vol. El2b, p. 426. Georg Thieme, Stuttgart, 1990. 2. Reichel L.; Kirschbaum, E. Chem. Ber. 1943, 76, 1105. 3. AI-Rubaie, A. Z.; Alshirayda, H. A. Y. J. Organomet. Chem. 1985, 287, 321.
3.2 DIORGANYL DITELLURIDES 4. 5. 6. 7.
37
Lang, E. S.; Comasseto, J. V. Synth. Commun. 1988, 18, 301. Bergman, J. Tetrahedron 1972, 28, 3323. Engman, L.; Persson, J. Synth. Commun. 1993, 23, 445. Jia, X.; Jin, P.; Zhang, Y.; Zhou, X. Synth. Commun. 1995, 25, 253.
3.2
DIORGANYL DITELLURIDES
Three main routes have been well established for the preparation of diorganyl ditellurides: (1) The reaction of sodium ditelluride with alkylating or arylating agents. NaTeTeNa + RX
RTeTeR
(2) The oxidation of tellurols or tellurolate anions. RTeH (RTe-)
ox.
RTeTeR
(3) The reduction of organyltellurium trichlorides. RTeCl3
red.
RTeTeR
R = alkyl, aryl
3.2.1 From sodium ditelluride 3.2.1.1
From sodium ditelluride and alkylating agents
This is the most direct route to diorganyl ditellurides and therefore parallels the route leading to diorganyl tellurides, substituting sodium telluride for sodium ditelluride. Sodium ditelluride is prepared employing, with the appropriate ratio of the elements, methods analogous to those described for sodium telluride. (a) Liquid ammonia method Dimethyl ditelluride (typical procedure).1 Clean Na metal (3.2 g, 0.14 mol) is added to 100 mL of liquid NH3 at ⫺78°C. After stirring for 1 h, high-purity powdered Te (18.2 g, 0.14 mol) is added in 0.5 g portions. Methyl iodide (24 g, 0.17 mol) is then added dropwise for 20 min, with stirring, to the dark green solution. The NH3 is evaporated, H2O is added to the residue and the mixture extracted with ether (4⫻50 mL). The combined deep red extracts are dried overnight (CaCl2), and evaporated under vacuum. The residue is then distilled (7.6 g (38%); b.p. 97°C/9 torr). Diethyl ditelluride and dibenzyl ditelluride are prepared similarly2 in yields of 71% and 82%, respectively.
38
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
(b) Sodium naphthalene method Dialkyl ditellurides (general procedure).3 A mixture of powdered Te (3.58 g, 28 mmol), Na chips (0.65 g, 28 mmol) and naphthalene (0.36 g, 2.8 mmol) in anhydrous THF (25 mL) is refluxed under N2 and stirred for 1 h. During this time all the sodium is consumed and the mixture turns a light brown colour. The solution is stirred for an additional 3 h to ensure the complete reduction of Te, the temperature is then lowered to 10°C and the alkyl halide (28 mmol) is added dropwise for 30 min with stirring. After an additional hour of stirring at room temperature, the reaction mixture is filtered, the solvent evaporated and the residue distilled under vacuum, giving the pure ditelluride (R⫽Et (85%), n-Pr (90%), n-Bu (90%), MeOCH2CH2 (60%)). (c) Sodium hydride/DMF method Bis(4-carbomethoxy)butyl ditelluride (typical procedure).4 Powdered Te (1.27 g, 10 mmol), NaH (0.44 g, 11 mmol) and dry DMF (50 mL) are stirred at 70°C under argon for 3 h. The purple Na2Te2 solution is cooled at room temperature, and methyl 5-bromovalerate (2.15 g, 11 mmol) in dry argon-purged DMF (10 mL) is added. The mixture is stirred at room temperature for 1 h, cooled and poured into H2O (100 mL) and extracted several times with ether. The combined extracts are washed thoroughly with H2O, dried (Na2SO4) and evaporated under vacuum, giving a dark orange oil. The crude ditelluride is chromatographed on SiO2 (basic, 125 g eluting with CHCl3). Dark orange oil (1.38 g (53%)); single component on TLC (Rf ⫽0.56 in CHCl3). (d) Rongalite method Dialkyl ditellurides (general procedure)5 Rongalite (9.24 g, 0.08 mol) and NaOH (9.0 g, 0.23 mol) are dissolved in distilled H2O (200 mL). The apparatus is flushed with N2 and finely powdered Te (15.3 g, 0.12 mol) is added. The mixture is stirred for 5 h and then the alkyl bromide (0.12 mol) is added dropwise for 30 min with cooling and stirring. The solution is extracted with CCl4 (3⫻100 mL), and the extract is dried (CaCl2) and distilled under vacuum, giving the dark red, foul-smelling ditelluride (R⫽Et, n-Bu, n-pentyl, n-dodecyl).5,6 (e) TUDO method Dialkyl ditellurides (general procedure).7 A mixture of powdered Te (0.128 g, 1 mmol) and cetyltrimethylammonium bromide (CTAB, 0.004 g, 1.1⫻10⫺5 mmol) in THF (0.75 mL) and DMSO (0.5 mL) is purged with a flux of deoxygenated N2 for 15 min and then heated at 80°C. TUDO (0.1 g, 1 mmol) and NaOH (0.112 g, 2.6 mmol) in H2O (0.75 mL) are added. The mixture is refluxed for 1 h and then the purple solution is cooled at 15°C. The alkyl halide (2 mmol) is added and the mixture is stirred at room temperature for 1 h. Normal work-up and filtration through a pad of Celite® (using CH2Cl2 as the mobile phase) give the ditellurides as dark red oils (R⫽n-C11H23, n-C8H17, Me2CHCH2CH2, 2-heptyl, THPO(CH2)6 (93–98%)).
3.2 DIORGANYL DITELLURIDES
39
( f ) Sodium borohydride method Dioctyl ditelluride (typical procedure)8 Na (0.10 g, 4 mmol) in small pieces is added to a suspension of Te (0.50 g, 4 mmol) in absolute ethanol (50 mL), under N2 and with stirring. When the Na is dissolved, NaBH4 (0.075 g, 2 mmol) is added and the mixture heated under N2 for 2 h, using a heating mantle. The mixture is cooled at room temperature and neat octyl bromide (0.72 g, 4 mmol) is slowly added while stirring and cooling in an ice bath. After stirring for 30 min, the mixture is poured into distilled H2O (100 mL), extracted with ether (2⫻40 mL) and the combined extracts are dried. The solvent is evaporated under vacuum and the residue is recrystallized from ether (by cooling at ⫺78°C) (0.77 g (85%); m.p. 9°C). (g) Hydrazine hydrate method Dialkyl ditellurides (general procedure).9 Powdered Te (6.35 g, 50 mmol) is added to a stirred solution of NaOH (3.0 g, 75 mmol) in deoxygenated H2O (20 mL). The mixture is cooled in a water bath, and 100% hydrazine hydrate (2.5 g, 200 mmol) is added over a period of 30 min and stirring is continued for an additional hour at room temperature. The alkyl halide (50 mmol) is then added dropwise over a period of 2–3 h. During the addition, the temperature is maintained at 15–20°C. The end-point of the alkylation is indicated by a sharp colour change from dark brown to nearly colourless. The mixture is then extracted with ether, the organic layer is washed with H2O, dried (Na2SO4) and the solvent removed by slow distillation. The residue is distilled under vacuum. 3.2.1.2
From sodium ditelluride and aryl halides
The low reactivity of aryl halides towards nucleophilic reagents makes their reaction with sodium ditelluride unattractive for the preparation of diaryl ditellurides. Low yields are obtained, like the similar reaction with sodium telluride (see Section 3.1.2.1). Na2Te2 + 2ArX
HMPA ArTeTeAr DMF (5 - 40%)
Ar = Ph, 1- naphthyl, 2 - naphthyl, 9-antracenyl
Di-2-naphthyl ditelluride (typical procedure).10 2-Chloronaphthalene (2 mol equiv) is added to Na2Te2 (prepared by heating equimolar amounts of Te and Na in HMPA under N2). The mixture is heated at 130–170°C for 16–24 h (yield 20%; m.p. 116–118°C, recrystallized from hexane). This method was later revised replacing sodium ditelluride by potassium ditelluride.11 K2Te2
RTeTeR Te/ KOH/ H2NNH2 45, 38% 80- 90°C, 2 h R = Et, Me
RX
40
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
3.2.2 By oxidation of organotellurols or organotellurolates Organyl tellurolates, obtained by the insertion of elemental tellurium in organyllithium (or magnesium) reagents (used as starting materials to prepare unsymmetrical tellurides as shown in Section 3.1.3.2), can be oxidatively converted into the corresponding ditellurides. This general method can be performed by direct oxidation of the tellurolates or through a previous hydrolysis to the tellurols. RMet
Te
R = alkyl, aryl Met = Li(MgX)
RTeMet H+
air RTeH
air
RTeTeR
The Grignard route to diorganyl ditellurides suffers from lack of generality and the mechanism of the oxidation seems to be uncertain. Alkylmagnesium halides demonstrate lack of reactivity towards elemental tellurium,12 whereas arylmagnesium halides in ether as the solvent furnish a mixture of ditellurides and tellurides.13 Satisfactory results are obtained by tellurium insertion in arylmagnesium halides in THF followed by oxidation before or after aqueous work-up.12,14,15 Bis(m-methoxyphenyl) ditelluride (typical procedure).14 To a stirred solution of m-bromoanisole (3.74 g, 20 mmol) in dry THF (80 mL) under N2 are added Mg turnings (0.49 g, 20 mmol) at room temperature. The mixture is heated under reflux until most of the Mg is dissolved. The Grignard reagent solution is cooled to room temperature and well-powdered Te metal is added. After 0.5 h most of the metal will have dissolved. The reaction mixture is then saturated with dry air at room temperature. The m-methoxyphenyl ditelluride is obtained after routine work-up as a red oil (2.96 g (63.0%)). Bis(p-methoxyphenyl) ditelluride (typical procedure).15 To a solurion of p-methoxyphenylmagnesium bromide (prepared from p-bromoanisole (5.82 g, 0.0311 mol) and Mg (1.0 g, 0.042 mol) in THF (20 mL)) is added Te shot (3.81 g, 0.0300 mol) at room temperature. The mixture is stirred under reflux for 3 h and then cooled to 0°C and treated with a saturated solution of NH4Cl (20 mL; vigorous evolution of gas). The mixture is filtered through Celite® and the solids washed with saturated solution of NH4Cl and ether. The organic phase is washed with brine and dried with Na2SO4. Evaporation of the solvent and recrystallization from CHCl3/petroleum ether affords the pure product (5.16 g (75%); m.p. 57–59°C). Early experiments to prepare diaryl ditellurides, employing aryllithium reagents generated by lithium–halogen exchange using ether as the solvent, gave only modest yields.16,17 At present the most successful and general route to dialkyl and diaryl ditellurides employs the telluration of organyllithium compounds in THF. Di-n-butyl ditelluride (typical procedure).18 n-Butyllithium (8.0 mL, 2.15 M in hexane; 17.2 mmol) is added dropwise at room temperature under N2 to a stirred suspension of finely ground elemental Te (1.9 g, 14.9 mmol) in dry THF (50 mL). After 15 min all the Te has been consumed, and the resulting yellowish solution is diluted with H2O (200 mL).
3.2 DIORGANYL DITELLURIDES
41
Air is then bubbled through it to oxidize the lithium tellurolate. The red oily ditelluride that separates is extracted with ethyl ether (200 mL). The organic phase is washed with H2O (2⫻50 mL), dried (CaCl2) and evaporated to give 2.83 g of a viscous red oil. Distillation of 5.66 g of the crude material prepared in this manner affords 4.87 g of pure di-n-butyl ditelluride (89% based on Te; b.p. 103–105°C/0.8 torr). Di-t-butyl ditelluride is prepared in the same manner. Diphenyl ditelluride (typical procedure).19 To a suspension of powdered Te (25.5 g, 0.2 mol) in anhydrous THF (300 mL), 2.0 M phenyllithium (100 mL, 0.2 mol) is added dropwise, with stirring and under argon. The resultant mixture is stirred at room temperature for 2 h and under reflux for 1 h. The reaction mixture, which should contain only a small amount of unreacted Te, is allowed to cool to 20°C, and is poured into 1 L of H2O. Oxygen (or air) is bubbled for 1 h through the mixture, which is then extracted with benzene (100 mL). The benzene solution is washed three times with H2O, dried (Na2SO4) and evaporated. The residue is recrystallized from EtOH (77%; m.p. 63.8–65.0°C). Di-2-thienyl and di-2-furyl ditelluride are prepared from thiophene and furan by lithiation with n-buthyllithium, tellurium insertion and oxidative work-up.17 Di-2-thienyl ditelluride (typical procedure).17 n-Butyllithium (11.0 mL, 2.2 M, 24.2 mmol) is added to an ice-cooled stirred solution of thiophene (2.0 g, 23.8 mmol) in dry THF (50 mL). After 10 min at 0°C and 50 min at room temperature, elemental Te (2.9 g, 22.7 mmol) is added rapidly. All Te is completely dissolved after 30 min, when the yellowish solution is poured into a beaker containing H2O (300 mL). CH2Cl2 (200 mL) is then added and air passed through the two-phase system for 1 h. To effect complete oxidation, the beaker is left overnight in the open air. The organic phase is separated and the aqueous phase extracted several times with CH2Cl2. The combined organic extracts are dried (CaCl2) and evaporated to give a red solid. Recrystallization from EtOH affords 3.54 g (74%) of di-2-thienyl ditelluride (m.p. 89–90°C). The preparation of aryllithium reagents can also be performed by using t-butyllithium in a halogen–metal exchange, and aqueous potassium ferricyanide as an oxidant.17,20 Bis(p-methoxyphenyl) ditelluride (typical procedure).20 t-Butyllithium (10 mL, 1.7 M, 17.0 mmol) is added dropwise to a stirred solution of p-bromoanisole (1.59 g, 8.5 mmol) in THF (40 mL) at ⫺78°C under argon. After 1 h the cooling bath is removed and the mixture allowed to warm to room temperature for 30 min. Finely ground Te (1.08 g, 8.5 mmol) is then added rapidly while a brisk stream of argon is passed through the open system to prevent admission of air. After 1 h, when only traces of Te remain, the mixture is poured into a separating funnel containing K3Fe(CN)6 (2.80 g, 8.5 mmol) in H2O (150 mL). The ditelluride product is extracted with CH2Cl2 (100 mL ⫹ 2⫻50 mL). After drying of the combined extracts (CaCl2), evaporation on SiO2 (10 g) and flash chromatography (SiO2; hexane/CH2Cl2, 8:2) give the ditelluride (0.99 g (50%); m.p. 58–59°C). The material is recrystallized from EtOH. The following diaryl ditelluride can be prepared in the same manner as in the foregoing procedure: Ar⫽2-pyridyl, Ph and (halogen and Me) derivatives, p-(Me2N)C6H4, 1-naphthyl, 4-biphenylyl (50–84%).
42
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
The direct oxidation of lithium aryl tellurolates into the ditellurides without previous aqueous work-up is exemplified by the preparation of di(2,4,6-tri-t-butylphenyl) ditelluride.21 The arylation of sodium telluride in NMP (see Section 3.1.2.1) followed by air oxidation gives rise to diaryl ditellurides in medium to good yields.22 Te
NaH NMP, 100 -110°C, 1 h
Na2Te
ArI (0.5 equiv)
air ArTeTeAr benzene, r.t. (51 -71%)
ArTe-
NMP, 120°C , 5 h
Ar = Ph and (methyl and methoxy) derivatives, 1- naphthyl, 2 - naphthyl
Diphenyl ditelluride (typical procedure).22 Iodobenzene (130 mg, 0.64 mmol) is added dropwise to a stirred solution of Na2Te (1.3 mmol) in NMP (4 mL) and the mixture is heated at 120°C for 5 h. After cooling, the mixture is diluted with benzene (5 mL), and a stream of air is bubbled into the dark solution. Free Te which separates is removed by filtration and the filtrate is worked up as usual to give the crude ditelluride, which is purified by recrystallization from a mixture of hexane and EtOAc (3:1) to give the pure product (90 mg (66%)). 3.2.3 By reduction of organotellurium trichlorides The reduction of organyltellurium trichlorides, which are the primary products of several reactions involving tellurium tetrachloride (see Section 3.5.1), is a useful and general method for the preparation of diorganyl ditellurides.
TeCl4
organic substrate or metallo- organic reagent
red
RTeCl3
RTeTeR
Some examples of these reductions are given below. 3.2.3.1
Reduction of -carboxyalkyltellurium trichlorides
-Carboxylalkyltellurium trichlorides, obtained by the reaction of tellurium tetrachloride with carboxylic acid anhydrides, are reduced to the corresponding ditellurides with potassium hydrogen sulphite.23,24 R TeCl4 + R
Cl3Te
CO)2O R HO2C
R
Te CO2H Cl Cl
R KHSO3 CO2H H2O KHSO3 H2O
HO2C R
HO2C
)2Te
R Te Te
CO2H
3.2 DIORGANYL DITELLURIDES
43
3.2.3.2 Reduction of -alkoxyalkyltellurium trichlorides The trichlorides obtained by the alkoxytellurination of alkenes (see Section 3.5.1.2) or by the cyclotellurination of hydroxyalkenes (see Section 4.6.2.4) are reduced in situ, without isolation, with sodium metabisulphite.25 OR1 OR1 TeCl3 Na2S2O5 Te Te R R R R H2O R (yield %): n - Bu (58), s - Bu (22), i - Bu (29), n - hexyl (72), n - decyl (72), n-C14H29 (50), HOC9H15 (45), HOC10H20 (41), Bz (80), Ph (18); R1 = Me, R = n - decyl (55), Bz (65); R1 = Et, R = n - decyl (23); R1 = i - Pr OR1
TeO2 / R1OH /HCl
R
R
R
R
same conditions OH
R
O
TeCl3
62, 83 % R1
R O
Te Te
O
R1
R1 = R = H,
Bis(2-methoxy-3-phenylpropyl) ditelluride (typical procedure).25 TeO2 (2.0 g, 12.5 mmol) is dissolved in concentrated HCl (10 mL) and the yellow solution diluted with MeOH (40 mL). Allyl benzene (1.75 g, 14.8 mmol) is added and the mixture heated under reflux for 24 h and then allowed to cool to room temperature. The yellowish solution (containing a trace of elemental Te) is shaken in a separating funnel with H2O/CH2Cl2 (100 mL/100 mL) containing Na2S2O5 (5 g). The red CH2Cl2 phase is separated, dried and evaporated, giving a red oil which is purified by flash chromatography (SiO2/CH2Cl2) to give the ditelluride (2.78 g (80%)). 3.2.3.3
Reduction of aryltellurium trichlorides
Aryltellurium trichlorides (see Sections 3.5.1.3 and 3.5.1.4) are easily reduced by means of several reducing agents. The most popular reduction procedures are described in sequence. (a) By hydrated sodium sulphide This reagent, together with potassium hydrogen sulphite,25 has been used to reduce aryltellurium trichlorides26,27 since the early period of tellurium chemistry, and continues to find wide application. Diaryl ditellurides (general procedure).27 The aryltellurium trichloride is poured into 15 mol equiv of Na2S·9H2O heated (and melted) at 95–100°C in a beaker, with strong manual stirring. An exothermic reaction occurs. After 10 min at the same temperature, excess H2O is added. By cooling the ditelluride solidifies, and is collected by decantation or filtration. The yields are near to quantitative.
44
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
The following ditellurides can be prepared by the foregoing method28–31: Ar⫽Ph, p-MeOC6H4, p-EtOC6H4, p-PrOC6H4, p-BuOC6H4, p-PhOC6H4, p-PhSC6H4, p-ClC6H4, p-BrC6H4, m-FC6H4, p-Me02C, p-Et02CC6H4, 3,4-(MeO)2C6H3, 1-naphthyl, 2-naphthyl. (b) By TUDO Diaryl ditellurides (general procedure).32 A mixture of the aryltellurium trichloride (2.0 mmol) and 2 N NaOH (5 mL) is vigorously stirred at room temperature for 15 min (at that time the trichloride has been converted into the corresponding sodium tellurinate). TUDO (0.43 g, 4.0 mmol) and petroleum ether (30–60°C, 5 mL) are added to the mixture, and stirring at room temperature is continued for 15 min. The phases are separated and the organic layer is dried (MgSO4). The solvent is evaporated, giving the ditelluride (Ar⫽Ph (92%), p-MeOC6H4 (94%)). The corresponding aryltellurium tribromides are reduced similarly. (c) By hydrazine hydrate Di-p-tolyl ditelluride (typical procedure).33 A solution of hydrazine hydrate (3.2 g, 0.1 mol) in EtOH (20 mL) is added slowly dropwise to a refluxing solution of p-tolyltellurium trichloride (3.25 g, 10 mmol) in EtOH until evolution of N2 ceases. The hot mixture is filtered, and the ditelluride crystallizes by cooling (0.96 g (44%; m.p. 52°C). In the same manner the following ditellurides can be prepared: Ar⫽Ph, p-MeC6H4, p-EtOC6H4, p-Br-C6H4, m-MeC6H4, p-MeOC6H3 (45–84%). (d) Additional methods Sodium ascorbate34 has also successfully employed as reducing agents. Reduction of aryltellurium trichlorides with sodium ascorbate (typical procedure).34 p-Methoxyphenyltellurium trichloride (0.30 g, 0.88 mmol) was added to a stirred solution of sodium ascorbate (0.53 g, 2.7 mmol) in water/methanol/acetone (1 mL + 5 mL + 5 mL). After 5 h, water (50 mL) and CH2Cl2 (50 mL) were added and the two phases separated. The organic phase was dried (CaCl2) and the solvent evaporated in vacuo. Flash chromatography (SiO2; CH2Cl2) yielded 0.20 g (97%) of bis(p-methoxyphenyl) ditelluride. 3.2.4 Diaryl ditellurides from aryl boronic acids Aryl boronic acids treated with TeCl4 generate aryltellurium trichlorides which are reduced to diaryl ditellurides without prior isolation.35 TeCl4
NaHSO3 ArTeCl3 ArTeTeAr MeNO2 (60 - 95%) reflux, 30 min Ar = Ph, o -NO2C6H4, o -ClC6H4, m -NO2C6H4, p -MeC6H4
ArB(OH)2
3.3 ORGANYL TELLUROLS
45
REFERENCES 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35.
Chen, M. T.; George, J. W. J. Organomet. Chem. 1968, 12, 401. Bogolyubov, G. M.; Slyk, Y. N.; Petrov, A. A. J. Gen. Chem. USSR 1969, 39, 1768. Bhasin, K. K.; Gupta, V.; Gautam, A.; Sharma, R. P. Synth. Commun. 1990, 20, 2191. Goodman, M. M.; Knapp, F. F. J. Org. Chem. 1982, 47, 3004. Davies, J.; McWhinnie, W. R.; Dance, N. S.; Jones, C. H. W. Inorg. Chim. Acta 1978, 29, L217. Uemura, S.; Takahashi, M.; Ohe, K.; Sugita, N. J. Organomet. Chem. 1989, 361, 63. Ferreira, J. T. B.; Oliveira, A. R. M.; Comasseto, J. V. Synth. Commun. 1989, 19, 239. Lee, W.; M. S. Thesis. Texas A&M University (1986). Irgolic. K. J. in Houben-Weyl-Methods of Organic Chemistry. 4th edn, Vol. E12b, p. 259. Georg Thieme, Stuttgart, 1990. Bhasin, K. H.; Gautam, A. Phosphorus Sulfur 1988, 38, 211. Sandman, D. J.; Stark, J. C.; Acampora, L. A.; Gagne, P. Organornetallics 1983, 2, 549. Vvedenskii, V. Yu.; Deryagina, E. N.; Trofimov, B. A. Russ. J. Gen. Chem. 1996, 66, 1539. Haller, W. S.; Irgolic, K. J. J. Organomet. Chem. 1972, 38, 97. Petragnani, N.; Moura Campos, M. Chem. Ber. 1963, 96, 249. Akiba, M.; Lakshmikantham, M. V.; Jen, K.; Cava, M. P. J. Org. Chem. 1984, 49, 4819. Detty, M. R.; Murray, B. J.; Smith; D. J.; Zumbulyadis, N. J. Am. Chem. Soc. 1983, 105, 875. Piette, J. L.; Renson, M. Bull. Soc. Chim. Belg. 1970, 79, 353. Engman, L.; Cava, M. P. Organometallics 1982, 1, 470. Engman, L.; Cava, M. P. Synth. Commun. 1982, 12, 163. Seebach, D.; Beck, A. K. Chem. Ber. 1975, 108, 314. Engman, L.; Persson, J. J. Organomet. Chem. 1990, 388, 71. Lange, L.; Du Mont, W. W. J. Organomet. Chem. 1985, 286, C1. Suzuki, S.; Nakamura, T. Synthesis 1992, 549. Morgan, G. T.; Drew, H. D. K. J. Chem. Soc. 1925, 531. Morgan, G. T.; Kellett, R. E. J. Chem. Soc. 1926, 1080. Engman, L. Organometallics 1989, 8, 1997. Reichel, L.; Kirschbaum, E. Annals 1936, 523, 211. Reichel, L.; Kirschbaum, E. Ber. Dtsch. Chem. Ges. 1943, 76, 1105. Petragnani, N.; Vicentini, G. (unpublished results). Petragnani, N. Tetrahedron 1960, 11, 15. Vicentini, G.; Giesbrecht, E.; Pitombo, L. R. M. Chem. Ber. 1959, 92, 40. Sadekov, I. D.; Sayapina, L. M.; Bushkov, A. Y.; Minkin, V. I. J. Gen. Chem. USSR 1971, 41, 2747. Lang, E. S.; Comasseto, J. V. Synth. Commun. 1988, 18, 301. Bergman, J. Tetrahedron 1972, 28, 3323. Engman, L.; Persson, J. Synth. Commun. 1993, 23, 445. Clark, A. R.; Nair, R.; Fronczek, F. R.; Junk, T. Tetrahedron Lett. 2002, 43, 1387.
3.3
ORGANYL TELLUROLS
Organyl tellurols are very unstable compounds owing to their extreme sensitivity to oxygen, giving the corresponding ditellurides. The first short-chain alkyltellurols (C1–C4) have been isolated as yellow liquids with an obnoxious odour, from the reaction of aluminium telluride and hydrogen telluride, respectively, with alcohols and alkyl bromides.1 Aryltellurols seem not to have been isolated. As shown in Sections 3.1.3.2 and 3.2.2, aryl tellurolates are
46
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
starting materials for the preparation of aryl tellurides and diaryl ditellurides and, consequently, aryltellurols find wide use in the manipulation of several organic functionalities. Because of their intractability, these reagents are generated in situ, the most appropriate methods being described in several sections in the text. REFERENCE 1. (a) Irgolic, K. J. in Houben-Weyl-Methods of Organic Chemistry. 4th edn, Vol. E12b, p. 152. Georg Thieme, Stuttgart, 1990. (b) Rheinboldt, H. in Houben-Weyl-Methoden der Organishen Chemie. Vol. IX, p. 970, Georg Thieme, Stuttgart, 1955.
3.4
BIS-ORGANYL TELLUROMETHANES
Bis-organyl telluromethanes or organyl telluroketals, can be prepared by the conventional method involving the reaction of 2 equiv of organyl tellurolates with dihalomethanes. 2RTeMet + XCH2X
RTeCH2TeR
R = Me; Met = Li; X = Cl (ref. 1) R = Ph; Met = Li; X = I (ref. 1, 2) R = p -EtOC6H4; Met = Na; X = I (ref. 3) R= S Met = Na; X = Cl (ref. 4)
N Ts
A more convenient method due to the mild experimental conditions and high yields involves the reaction of diaryl ditellurides with diazomethane.5
ArTeTeAr
CH2N2 ether, 0°C (100%)
ArTeCH2TeAr
Ar = p -MeOC6H4, p -EtOC6H4
Diaryl diselenide and diaryl disulphide react analogously. Reaction of diaryl ditellurides with diazomethane-formation of diaryl telluroketals (typical procedure).5 Di-p-methoxyphenyl ditelluride (2.34 g, 5 mmol) in ether (30 mL) is treated dropwise, at 0°C and while stirring, with an ethereal solution of diazomethane until disappearance of the red colour of the ditelluride. Evolution of N2 ensues. The product is obtained by evaporation of the solvent. Recrystallization from hexane or EtOH gives colourless crystals (2.41 g (100%); m.p. 98–99°C). Telluroketals exhibit synthetic interest since they easily generate methyllithium derivatives by treatment with alkyllithium compounds (see Section 4.8.1.3).
3.5 ORGANYLTELLURIUM TRIHALIDES
47
REFERENCES 1. 2. 3. 4. 5.
Hope, E. G.; Kemmitt, T.; Levanson, W. Organometallics 1988, 7, 78. Seebach, D.; Beck, A. B. Chem. Ber. 1975, 108, 314. Pathirane, H. M. K. K.; McWhinnie, W. R. J. Chem. Soc. Dalton Trans. 1986, 2003. Engman, L.; Cava, M. P. Organometallics 1982, 1, 470. Petragnani, N.; Schill, G. Chem. Ber. 1970, 103, 2271.
3.5
ORGANYLTELLURIUM TRIHALIDES
Organyltellurium trichlorides, tribromides and triiodides are well-known compounds, the trichlorides being the most familiar and useful for synthetic purposes. Organyltellurium trichlorides are easily accessible, exploiting the electrophilic character of tellurium tetrachloride by the direct introduction of the –TeCl3 moiety in organic substrates. Otherwise, organyltellurium trichlorides as well as the tribromides and triiodides, seldom generated by the preceding method, can be obtained by the halogenolysis of the corresponding ditellurides.
TeCl4
organic substrate
RTeTeR
X2
Organic substrate
TeCl3
RTeX3
X = Cl, Br, I
3.5.1 Organyltellurium trichlorides from tellurium tetrachloride and organic substrates 3.5.1.1
From tellurium tetrachloride and ketones and carboxylic anhydrides
Reactions involving the attack of a nucleophilic carbon atom activated by an -carbonyl group at the electrophilic tellurium atom of tellurium tetrachloride belong to the oldest methods of preparative organic tellurium chemistry. Depending on the structure of the ketone, different regiosubstituted trichlorides are obtained, in addition to the corresponding dichlorides.1,2 O R O
O R
TeCl3
TeCl3
+ TeCl4 R R
O Cl Cl O Te (and isomers)
R
48
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
Acetic and propionic anhydrides furnish compound of type RCH(TeCl3)CO2H (R⫽H, Me) 3.5.1.2
From tellurium tetrachloride and alkenes
The addition of tellurium tetrachloride to alkenes produces chloroalkyltellurium trichlorides. Butenes, 1-decene, cycloalkenes, and 3-substituted 1-propenes give mixtures of syn and anti additions.3–6 R
R
H
H
+ TeCl4
Cl CHCl3
R
TeCl3 H H
R
+
Cl R
TeCl3 H R
H
-Chloroalkyltellurium trichlorides (general procedure).5 Freshly sublimed TeCl4 (1.67 g, 6.2 mmol) and the olefin (6.4 mmol) are stirred in an ice bath for 3 h in dry, ethanol-free CHCl3 (20 mL), until almost all the TeCl4 has disappeared. Filtration and evaporation yield the adduct as a mixture of isomers (percentage yield, sin/anti ratio): (Z)-2-butene (67, 20/80), (E)-2-butene (94, 42/58), cyclopentene (98, 50/50), cyclohexene (99, ⬎97% anti), cyclooctene (83, >97% syn), 1-decene (98%), (E)-1-D-1-decene (96%). A regiospecific concerted syn addition (path (a)) competing with a radical chain reaction (path (b)) has been proposed to rationalize the addition of TeCl4 to olefins. R
a)
R
R
+ TeCl4
R H Cl
R Cl TeCl3
b)
TeCl3 . + Cl.
TeCl4 R
R H TeCl3
R
R
+ TeCl3 .
R .
TeCl4
R Cl
TeCl3
R TeCl3
p-Benzoquinone, a radical scavenger, has been shown to be highly effective to promote the syn addition in the above reactions. Depending on the TeCl4/alkene ratio and the polarity of the solvent, bis(chloroalkyl)tellurium dichlorides can be formed (see Section 3.9.2.2). The alkoxytrihalotellurination of alkenes or cycloalkenes is afforded by treatment with tellurium dioxide/hydrochloric acid/alcohol7 or with tellurium tetrachloride (or tetrabromide)/alcohol in carbon tetrachloride.8 The addition is regiospecific, the tellurium moiety bonding to the less hindered carbon atom, and stereospecific as demonstrated by the anti addition to cycloalkenes. By the first procedure the trichloride is reduced without isolation to the corresponding ditelluride (see Section 3.2.3.2). OR1 R
TeO2 /HCl /R1OH
R
OR1
OR1 TeCl3
red.
R
Te Te
R
3.5 ORGANYLTELLURIUM TRIHALIDES
( )n
+ TeX4
49
TeX3
ROH CCl4
( )n OR
X = Cl, Br n = 1, 2
Trans-2-ethoxycyclohexyltellurium trichloride (typical procedure).8 Cyclohexene (1.6 g, 19.5 mmol) is added to TeCl4 (5.0 g, 18.6 mmol) in CCl4 (50 mL) and EtOH (2.76 g, 60 mmol). The mixture is heated under reflux for 2 h, cooled, filtered to remove traces of elemental Te, shaked with charcoal and refiltered. Evaporation under vacuum and recrystallization from petroleum ether (30–60°C) give the pure product ((63%); m.p. 97–98°C). The following trans-2-alkoxycycloalkyltellurium trihalides are prepared similarly: n⫽1, 2; X⫽Cl, Br; R⫽MeO, n-Pr, i-Pr. It must be pointed out, however, that the addition of tellurium tetrachloride to olefins lacks generality, and undefined results have been mentioned such as formation of tarry products, reduction to elementary tellurium, or no reaction at all.9 3.5.1.3
From tellurium tetrachloride and arenes
The condensation of tellurium tetrachloride with aromatic compounds is of general application and has long been used as an efficient route for the preparation of aryltellurium trichlorides. In accordance with a typical electrophilic aromatic substitution, this reaction is successfully accomplished by simply treating aromatic compounds activated by electrondonating groups, such as alkoxy, phenoxy, hydroxyl and thiophenoxy moieties, with tellurium tetrachloride in refluxing chloroform, carbon tetrachloride or toluene.10–15
R
+ TeCl4 solvent, 85 - 96%
TeCl3 R
+ HCl
representative examples: R = p - MeO, p -EtO, p -PhO, p -HO
p-Methoxyphenyltellurium trichloride (typical procedure).13 Anisol (5.4 g, 50 mmol) and TeCl4 (13.5 g, 50 mmol) in CCl4 (40 mL) are heated under reflux for 2 h. Evolution of HCl occurs and the heavy crystalline TeCl4 is progressively converted into yellow flakes of trichloride. The product is filtered off and washed with CCl4. (15.5 g (91%)). The crude product is recrystallized from glacial HOAc as yellow needles (m.p. 182°C). Non-activated arenes react only under more severe conditions,16,17 or in the presence of a Lewis acid.18 In the last case, however, the reaction does not stop at the trichloride step, and is more appropriate for the preparation of diaryltellurium dichlorides (see Section 3.9.2.3).
TeCl4 +
110°C (1:3)
TeCl3
2-Naphthyltellurium trichloride (typical procedure).16 TeCl4 (7.5 g, 27.8 mmol) is added to molten naphthalene (11.0 g, 86 mmol) kept at 110°C under N2. After 12 h at this temperature the greenish solid obtained is pulverized in a mortar and washed thoroughly with hot toluene (15.4 g (54%)). The product is recrystallized from benzene (m.p. 200–202°C).
50
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
The above-described solventless procedure has recently been promoted to a general method to prepare aryltellurium trichloride.19 The crude trichlorides can be converted in situ into the corresponding aryl butyl tellurides by sequential treatment with aqueous sodium borohydride and n-butyl bromide (see Section 3.1.3.2). R1 R 1a-i
R1
TeCl4 no solvent 120°C
R
TeCl3
THF,BuBr NaBH4/H2O
R1 TeBu
0°C to r.t., 1 h R 2a-i
1a R = H, R1 = 4-MeO 1b R = H, R1 = 4-EtO 1c R = 3-MeO, R1 = 4 - MeO 1d R = 3-Me, R1 = 4 -MeO 1e R = H, R1 = 4 -Me
1f R = H, R1 = 4-Ph 1g R = R1 = Ph 1h R = H, R1 = 4-PhO 1i R = H, R1 = 4-HO
2a (73%); 2b (76%); 2c (72%); 2d (82%); 2e (69%); 2f (79%); 2g (68%); 2h (55%); 2i (72%).
General procedure for preparation of aryltellurium trichlorides and aryl butyltellurides (typical procedure).19 A one-necked, round-bottomed flask containing tellurium tetrachloride (5.38 g, 20 mmol) was heated to 120°C and the corresponding aromatic compound (20 mmol) was added at once, dissolving the tellurium tetrachloride promptly. An evolution of HCl was observed and a yellow solid was formed. The system was cooled to room temperature and the trichloride was used crude in the reduction/alkylation procedure. The trichloride prepared previously was dissolved in THF (80 mL) and bromobutane (5.48 g, 40 mmol) was added. The mixture was cooled to 0°C and a solution of sodium borohydride (3 g, 80 mmol) in water (80 mL) was added dropwise. The mixture turned to dark with addition of the first drops and then to light yellow after completion of the addition. The reaction was stirred for a further 20 min at room temperature and quenched with a saturated solution of NH4Cl (50 mL). The mixture was extracted with ethyl acetate (2⫻80 mL) and washed with brine (2⫻60 mL). The organic phases were combined, dried over MgSO4 and concentrated at reduced pressure. The desired telluride was purified by silica gel column chromatography using hexanes as eluent. 3.5.1.4
From tellurium tetrachloride and arylmercury chlorides
Arylmercury chlorides are valuable reagents for the preparation of aryltellurium trichlorides because they are used when the aromatic substrate is not sufficiently reactive for an easy direct condensation with tellurium tetrachloride.20 TeCl4 + ArHgCl
dioxane -HgCl. dioxane
ArTeCl3
representative examples (ref. 14, 15, 21-24) Ar = Ph (ref. 20), 2 - naphthyl (ref. 23),o - PhSC6H4 (ref. 14), p - Cl, p - Br, m -F, p -NO2, m -NO2C6H4 (ref. 15), 2- thienyl (ref. 24); yields 56- 96%.
The formed mercury dichloride is separated as a crystalline complex with dioxane. Since the starting arylmercury chlorides are easily prepared from diazonium salts, this method allows the conversion of anilines into aryltellurium trichlorides.
3.5 ORGANYLTELLURIUM TRIHALIDES
51
1-Naphthyltellurium trichloride (typical procedure).14 A solution of 1-naphthyl mercury chloride25 (7.2 g, 20 mmol) and TeCl4 (5.4 g, 20 mmol) in pure dioxane (40 mL) is heated under reflux for 2 h. The crystalline HgCl2 dioxane that precipitates on cooling the solution at 10°C is removed by filtration. The dark yellow solution is evaporated, giving a viscous oil. By cooling and adding petroleum ether at 30–60°C the oil crystallizes. The crude trichloride is crystallized from glacial HOAc as yellow crystals (m.p. 175–180°C; 6.9 g (96%)). The crude product can also be purified by reduction to the corresponding ditelluride with Na2S·9H2O (see Section 3.2.3) and subsequent chlorinolysis with SO2Cl2 (see next section). 3.5.2 By chlorinolysis of diorganyl ditellurides Dialkyl and diaryl ditellurides are easily converted into the corresponding tellurium trichlorides by means of the fission of the Te–Te bond by a chlorinating reagent. This route is very suitable for the preparation of the alkyl derivatives in view of the easy accessibility of dialkyl ditellurides via the alkylation of sodium ditelluride (see Section 3.2.1). The chlorinolysis can be effected by employing chlorine26 in solvents (chloroform, carbon tetrachloride, dichloromethane and benzene) or, more conveniently, avoiding the use of gaseous chlorine, by treatment with thionyl chloride27–28 or sulphuryl chloride.7,29–31
RTeTeR
Cl2 or SOCl2 or SO2Cl2
RTeCl3
R = alkyl, aryl
Organyltellurium trichlorides (general procedure).7,30 A solution of the ditelluride in benzene or CCl4 is treated dropwise at 0°C with a slight excess of SO2Cl2 in the same solvent. The crude precipitate of the trichloride is separated by filtration. The yield is close to 100%. 3.5.3 Organyltellurium tribromides and triiodides by halogenolysis of the corresponding ditellurides Like chlorinolysis, the brominolysis and iodinolysis of diorganyl ditellurides offer a facile route to tellurium tribromides and triiodides.14,31 RTeTeR
X2 solvent
2RTeX3
X = Br, I
The aryl derivatives, which are not easily accessible from tellurium tetrabromide and tetraiodide, are therefore prepared by this route. p-Methoxyphenyltellurium tribromide (typical procedure).14 Bromine (0.48 g, 3 mmol) dissolved in CCl4 (5 mL) is added dropwise, with stirring, to a solution of di-p-methoxyphenyl
52
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
ditelluride (0.47 g, 1 mmol) in CCl4 (5 mL) at 0°C. The tribromide precipitates as an orange crystalline product and is separated by filtration (0.95 g (100%)). It is recrystallized from glacial HOAc (m.p. 188–190°C (dec.)). p-Methoxyphenyltellurium triiodide (typical procedure).14 The triiodide is prepared following the previous procedure, using the corresponding ditelluride (1 mmol) in CCl4 and iodine (3 mmol) in benzene. The yield is quantitative. The product is recrystallized from benzene (m.p. 131–133°C (dec.)). The following tribromides can be prepared using the same procedure as described above: Ar⫽p-EtOC6H4, p-PhOC6H4, p-PhSC6H4,14 1-naphthyl,30 2-naphthyl.14 The following triiodides can also be prepared: Ar ⫽ p-EtoC6H4, p-PhOC6H4, p-PHSC6H4, 1-naphthyl.14 (2-naphthyl-Te)2 forms exclusively 2-naphthyl-Tel, the triiodide being unknown30 (see Section 3.7). Dibenzyl ditelluride on treatment with bromine undergoes cleavage of the Te–benzyl bond, giving benzyl bromide and tellurium tetrabromide.32 Ph
Te Te
Ph
Br2 -Te
2 Ph
Br + TeBr4
3.5.4 Additional method: preparation of organyltellurium trichlorides and tribromides by the reaction of tetraorganyltin compounds with tellurium tetrachloride and tetrabromide33 SnR4 + TeX4
benzene 20°C
RTeX3 + R3SnX
R = Me, Et, C3H7, Ph X = Cl, Br
REFERENCES 1. Morgan, G. T.; Elvins, O. C. J. Chem. Soc. 1925, 127, 2625. 2. For compounds reported in the old literature see: (a) Rheinboldt, H. in Houben-Weyl-Methoden der Organischen Chemie. Vol. IX, p. 1060, 1152. (b) Irgolic, K. J. in The Organic Chemistry of Tellurium. p. 71. Gordon and Breach, New York, 1974. 3. Moura Campos, M.; Petragnani, N. Tetrahedron Lett. 1959, 11. 4. Ogawa, M.; Ishioka, R. Bull. Chem. Soc. Jpn. 1970, 43, 496. 5. Backwall, J. E.; Bergman, J.; Engman, L. J. Org. Chem. 1983, 48, 3918. 6. Uemura, S.; Fukuzawa, S. J. Organomet. Chem. 1984, 268, 223. 7. Engman, L. Organometallics 1989, 8, 1997. 8. Ali, M. E. S.; Malik, M. A.; Smith, B. C. Inorg. Chim. Acta 1989, 162, 157. 9. Irgolic, K. J. in Houben-Weyl-Methods of Organic Chemistry. 4th edn, Vol. E12b, p. 304. Georg Thieme, Stuttgart, 1990. 10. Morgan, G. T.; Kellet, R. E. J. Chem. Soc. 1926, 1080. 11. Morgan, G. T.; Drew, H. D. J. Chem. Soc. 1925, 127, 2307.
3.6 THE PRODUCTS OF THE HYDROLYSIS OF ARYLTELLURIUM TRIHALIDES 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33.
53
Drew, H. D. J. Chem. Soc. 1926, 223. Reichel, L.; Kirschbaum, E. Liebigs Ann. Chem. 1936, 523, 211. Petragnani, N. Tetrahedron 1960, 11, 15. Sadekov, I. D.; Sayapina, L. M.; Bushkov, A. Y.; Minkin, V.I. J. Gen. Chem. USSR 1971, 41, 2747. Bergman, J.; Engman, L. Tetrahedron 1980, 36, 1275. Bergman, J. Tetrahedron 1972, 28, 3323. Gunther, W. H. H.; Nepywoda, J.; Chu, J. Y. C. J. Organomet. Chem. 1974, 74, 79. Cunha, R. L. O. R.; Omori, A. T.; Castelani, P.; Toledo, F. T.; Comasseto, J. V. J. Organomet. Chem. 2004, 689, 3631. Irgolic, K. J. in Houben-Weyl-Methods of Organic Chemistry. 4th edn, Vol. E12b, p. 311. Georg Thieme, Stuttgart, 1990. Farrar, W. V. Research 1951, 4, 179. Campbell, I. G. M.; Turner, E. E. J. Chem. Soc. 1938, 39. Rheinboldt, H.; Vicentini, J. Chem. Ber. 1956, 89, 624. Chia, L. Y.; McWhinnie, W. R. J. Organomet. Chem. 1978, 148, 165. (a) Nesmejanov, N. Ber. Dtsch. Chem. Ges. 1929, 62, 1010. (b) Nesmejanov, N. Org. Synth. Coll. Vol. II, p. 432. Wiley, New York, 1943. (a) Wynne, K. J.; Pearson, P. S. Inorg. Chem. 1970, 9, 106. (b) Wynne, K. J.; Pearson, P. S. Inorg. Chem. 1971, 10, 1871. Rheinboldt, H. in Houben-Weyl-Methoden der Organischen Chemie (ed. E. Muller). 4th edn, Vol. IX, p. 1156. Georg Thieme, Stuttgart, 1955. Sadekov, I. D.; Bushkov, A. Y.; Yureva, U. S.; Minkin, V. I. J. Gen. Chem. USSR 1977, 47, 2321. Petragnani, N.; Moura Campos, M. Chem. Ber. 1963, 96, 249. Vicentini, G.; Giesbrecht, H.; Pitombo, L. R. M. Chem. Ber. 1959, 92, 40. Irgolic, K. J. in Houben-Weyl-Methods of Organic Chemistry. 4th edn, Vol. E12b, p. 315. Georg Thieme, Stuttgart, 1990. Spencer, H. K.; Cava, M. P. J. Org. Chem. 1977, 42, 2937. Schumann, H.; Magerstadt, M. J. Organomet. Chem. 1982, 232, 147.
3.6
THE PRODUCTS OF THE HYDROLYSIS OF ARYLTELLURIUM TRIHALIDES
Aryltellurium trihalides are sensitive to water and can be converted into products at different stages of hydrolysis. Oxohalides, aryltellurinic acids and aryltellurium anhydrides have been known for a long time, the oxohalides being the products of partial hydrolysis. ArTeX3
H2O
ArTe(O)X
H2O
ArTe(O)OH
ArTe(O)-O-Te(O)Ar
The ease of hydrolysis follows the order ArTeCl3 ⬎ ArTeBr3 ⬎ ArTel3. Aryltellurium trichlorides and tribromides are converted into the oxohalides by simple treatment with cold water. The triiodides are unaffected under these conditions, and on treatment with boiling water give mixtures or undefined products in most cases.1
54
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
Aryltellurium triiodides can be prepared by treating aryltellurium trichlorides, tribromides, oxohalides or aryltellurinic anhydrides with aqueous sodium iodide.1 Aryltellurinic acids were described in the early period of tellurium chemistry as the products of the alkaline hydrolysis of the trichlorides.2 However, the structure of these compounds was later argued about, and the corresponding anhydrides are today accepted as the unequivocal products.1,3,4 The anhydrides are stable, colourless, solids with high melting points and have recently attained a relevant role as synthetic reagents. Aryltellurium anhydrides (general procedure).1 The aryltellurium trichlorides (or tribromides) are treated by heating them with 10% aqueous Na2CO3 or NaOH until dissolution (a few minutes are sufficient). The cooled solution is treated with 10% HOAc. The anhydrides precipitate as white solids and are separated by filtration and dried under vacuum (in the presence of CaCl2) (m.p. >200°C; Ar⫽Ph, p-HOC6H4, p-MeOC6H4, p-EtOC6H4, p-PhOC6H4, 2-naphthyl (yields 90–100%)). Mixed anhydrides are prepared by reacting tellurinic anhydrides with carboxylic acids or anhydrides.5 2ArTe(O)OCOR + H2O
(ArTeO)2O + 2RCO2H Ar = Ph; R = Me, F3C
Arenetellurinic anhydrides are formed from the mixed anhydrides by hydrolysis, but a more convenient one-pot procedure for their preparation involves the reaction of phenyliodine(III) dicarboxylate with diaryl ditellurides in the two-phase system CH2Cl2/H2O 10%.6
ArTeTeAr + PhI(OCOR)2
CH2Cl2 / H2O r.t.
O ArTe)2O (90- 96%)
Ar = p - MeC6H4, p-MeOPh, Ph R = CF3, CH3, CH2Cl
Arenetellurinic mixed anhydrides (general procedure).1 A solution of diaryl ditelluride (0.5 mmol) in methylene chloride (5 mL) was added to a stirred solution of phenyliodine(III) dicarboxylate (1.5 mmol) in the same solvent (15 mL) at room temperature. The colour of diaryl ditelluride faded quickly. After stirring about 15 min the solvent was removed in vacuo and petroleum ether (15 mL) was added to the residue. The solid was collected and recystallized from methylene chloride–petroleum ether or benzene–petroleum ether to give pure anenetellurinic mixed anhydride.
REFERENCES 1. Petragnani, N.; Vicentini, G. Universidade de São Paulo; Faculdade de Filos. Cienc. Letras. Biol. Quím. 1959, 5, 75. Chem. Abstr. 1963, 11256, 58.
3.7 ARYLTELLURENYL HALIDES 2. 3. 4. 5. 6.
55
Reichel, L.; Kirschbaum, E. Annals 1936, 523, 211. Thavornyutikarn, P.; Whinnie, W. R. J. Organomet. Chem. 1973, 50, 135 and references therein. Barton, D. H. R.; Finet, J. P.; Thomas, M. Tetrahedron 1986, 42, 2319. Hu, N. X. ; Aso, Y.; Otsubo, T.; Ogura, F. J. Org. Chem. 1989, 54, 4398. Chen, D. W.; Chen, Z. C. Synth. Commun. 1995, 25, 1605.
3.7
ARYLTELLURENYL HALIDES
Halogenated derivatives of tellurium in the oxidation state ⫹2, namely tellurenyl halides, are unfamiliar compounds compared to the well-known selenium analogues.1,2 These compounds are in principle easily accessible by the controlled halogenolysis of the parent ditellurides. However, the first compound obtained in 1959, 2-naphthyltellurenyl iodide,3 remained for a long time the only stable representative of this class until the preparation of other members of this class by a successful use of the same method.4 ArTeTeAr + X2
2ArTeX
Ar = 2-naphthyl; X = I Ar = Ph, p - MeOC6H4, o - PhC6H4, p - PhC6H4, 2 -byphenylyl; X = Br, I Ar = m,p - (MeO)2C6H3; X = I
Several aryltellurenyl halides have been prepared, bearing an ortho carbonyl, nitro or another electron-attracting group, exhibiting a stabilizing effect by coordination to tellurium.5–8 With the exception of 2-naphthyltellurenyl iodide, the unsubstituted members are, however, thermally unstable in the solid state. Therefore, to exploit their highly electrophilic character, aryltellurenyl halides are not isolated, instead being generated in situ and used directly for further conversion.9,10 A recent report11 describes the synthesis of Te-anisyl phosphorotellurolate esters by the reaction of anisyltellurium trichloride with trialkylphosphites. The intermediacy of the anisyltellurenyl chloride, formed by the reduction of the trichloride at the expense of the excess of the trialkylphosphonite, rationalizes the result. ArTeCl3 + RO)2POR1
ArTeCl]
RO)2POR1
R = Et, n-Bu, Ph, PhCH2 R1 = H, Me, Et, n - Bu, PhCH2
RO)2P(O)-TeAr (76- 95%)
REFERENCES 1. Irgolic, K. J. in Houben-Weyl Methods of Organic Chemistry. 4 edn, Vol. E, p. 238. Georg Thieme, Stuttgart, 1990.
56
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
2. For an exhaustive survey see Sadekov, I. D.; Minkin, V. I. Russ. J. Org. Chem. 1999, 35, 953. 3. Vicentini, G.; Giesbrecht; E. L.; Pitombo, R. M. Chem. Ber. 1959, 92, 40. 4. Schulz, P.; Klar, G. Z. Naturforsch. B 1974, 30, 40, 43. 5. Piette, J. L.; Renson, M. Bull. Soc. Chim. Belg. 1971, 80, 669. 6. Piette, J. L.; Lysy, R.; Renson, M. Bull. Soc. Chim. Fr. 1972, 3559. 7. Wiriyachitra, P.; Falcone, S. J.; Cava, M. P. J. Org. Chem. 1979, 44, 3957. 8. Engman, L. J. Org. Chem. 1989, 54, 2964. 9. See Section 3.1.3.5. 10. Representative examples: Section 3.1.3.5, ref. 41; 3.16.1.2, ref. 26; 3.16.2.1, ref. 32; 3.16.2.2, ref. 12; 3.16.5.1, refs. 55–58; 3.16.5.2, ref. 59; 3.16.6, ref. 62; 3.16.7, refs. 66–69, 71, 73; 3.17.2.1, refs. 7, 9; 3.18, ref. 18; 4.5.1.4, ref. 8. 11. Hayashi, M.; Miura, T.; Matsuchika, K.; Watanabe, Y. Synthesis 2004, 1481.
3.8
ARYL TELLURENYL PSEUDOHALIDES: ARYL TELLUROCYANATES
Aryl tellurocyanates are easily prepared by reacting aryltellurenyl bromides (generated in situ by reduction of the corresponding tribromides) with potassium cyanide.1
ArTeBr3
Na2S2O5 / H2O/MeOH
[ArTeBr]
KCN 93, 86%
ArTeCN
Ar = p -MeOC6H4, Ph
p-Methoxyphenyl tellurocyanate (typical procedure).1 p-Methoxyphenyl tellurium tribromide (5.0 g, 14.2 mmol) is added to a solution of NaHCO3 (2.45 g, 29.2 mmol) in H2O (50 mL) and MeOH (3 mL). The mixture is stirred for 30 min and then KCl (3.70 g, 58.4 mmol) followed by Na2S2O5 (11.0 g, 58.4 mmol) are added. The formed mixture was stirred for 8 min and KCN (3.70 g, 58.4 mmol) was added. A white precipitate forms. The reaction mixture was diluted with H2O, extracted with CH2Cl2, and the organic phase was dried (Na2SO4) and filtered. The filtrate was diluted with hexane and the resultant solution was concentrated by distilling some of the solvent. The formed precipitate was filtered (3.60 g (93%); m.p. 77°C). The stable (o-nitrophenyl) tellurenyl bromide reacts directly with potassium cyanide to give the corresponding tellurocyanate.
o-NO2C6H4TeBr
KCN MeOH
o -NO2C6H4TeCN
REFERENCE 1. Falcone, S. J.; Fava, M. P. J. Org. Chem. 1980, 45, 1044.
(ref. 1)
3.9 DIORGANYL TELLURIUM DIHALIDES
3.9
57
DIORGANYL TELLURIUM DIHALIDES
3.9.1 From elemental tellurium The reaction of elemental tellurium with alkyl iodides giving dialkyltellurium diiodides is a 100-year-old method,1 but still finds some use2 even if the low yields make this method unattractive. Te + 2RI
R2TeI2
In an improved procedure, employing alkyl chlorides and bromides in the presence of sodium iodide, tellurium diiodides are obtained in increased yields.3 Te + 2RX
NaI solvent
R2TeI2
X = Cl, Br
1,3-Dihydro-2-benzotellurophene diiodide (typical procedure).3 A mixture of ,⬘dichloro-o-xylene (3.5 g, 20 mmol), finely powdered Te (2.55 g, 20 g-atom) and NaI (12.0 g, 80 mmol) in 2-methoxyethanol (100 mL) is stirred and gently boiled in an open beaker. After 1 h the mixture contains a heavy orange precipitate and a small amount of unreacted Te. After the addition of deionized H2O (200 mL), which causes additional precipitation, the precipitate is filtered off, washed with H2O, rinsed with acetone and air dried (8.5 g (83%)). The product is recrystallized from 2-methoxyethanol (two crystalline forms) (m.p. 222–225°C). 3.9.2 From tellurium tetrahalides (or tellurium dioxide) Employing appropriate ratios of reagents and experimental conditions, some of the reactions that convert tellurium tetrachloride into organyltellurium trichlorides (see Section 3.5.1) can be applied to the synthesis of diorganyltellurium dichlorides. 3.9.2.1
With ketones and carboxylic acid anhydrides O + TeCl4
R
CHCl3 reflux
O R
)2TeCl2 Cl
O
O
R
R + TeCl4 R
R
(ref. 4)
R
Cl Te R
O
O
(ref. 5)
R R
CHCl3 reflux
O
O
R
R R
R
)2TeCl2
58
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
O
O + TeCl4
O
3.9.2.2
HO2C
)2TeCl2
(ref. 6)
With alkenes Cl + TeCl4
2R
)2TeCl2
R
(ref. 7 -10)
Cyclotelluroetherification reaction, such as shown in the accompanying equation, is discussed in Section 4.6.2.4.11 ( )n
OH
TeO2 HOAc/LiCl
n(
) O
Cl Cl Te
( )n O
n = 1, 2
3.9.2.3
With arenes
When the reactions of tellurium tetrachloride with activated arenes (such as alkoxybenzenes) are performed using a large excess of the organic substrate and/or under prolonged heating at high temperatures, diaryltellurium dichlorides are formed in high yields.12–15 Cl Cl Te + TeCl4
2 R
R
R
Di-(p-methoxyphenyl)tellurium dichloride (typical procedure).14 Anisole (64.8 g, 0.6 mol) and TeCl4 (27.0 g, 0.1 mol) are heated at 160°C for 6 h. The mixture is allowed to crystallize under vacuum (30.6 g (90%)). The product is recrystallized from MeCN as colourless crystals (m.p. 181–182°C). In the presence of Lewis acids such as aluminium trichloride, diaryltellurium dichlorides are formed even with non-activated arenas.14,16 Diphenyltellurium dichloride (typical procedure).14 TeCl4 (27.0 g, 0.1 mol) and benzene (150 mL) are heated under reflux for 0.5 h. The solution is then cooled at 60°C and AlCl3 (1.0 g) is added. Evolution of HCl ensues. The mixture is then refluxed for 12 h, cooled, filtered to remove the formed trichloride and inorganic impurities. After evaporation, the residue is recrystallized from MeCN (12.6 g (36%); m.p. 160–161°C). 3.9.2.4
With arylmercury chlorides TeCl4 + 2ArHgCl
dioxane -HgCl2. dioxane
ArTe(Cl)2Ar
Diaryltellurium dichlorides (general procedure).17 TeCl4 (10.8 g, 40 mmol) and arylmercury chloride (80 mmol) are heated under reflux in anhydrous dioxane (100 mL) for 2 h.
3.9 DIORGANYL TELLURIUM DIHALIDES
59
The solution is cooled at 10°C and the HgCl2.dioxane precipitate filtered off and washed with cold dioxane (15 mL). The filtrate is poured while stirring into 1% ice-cold HCl (400 mL). The dichlorides precipitate as crystalline solids (yields >90%), and are recrystallized from benzene/petroleum ether 30–60°C (Ar⫽Ph, m.p. 160–162°C; p-MeC6H4, m.p. 165–166°C). It must be pointed out that the reaction of tellurium tetrachloride with aryl Grignard or lithium reagents is inappropriate for the preparation of diorganyltellurium dichlorides owing to the difficulty of stopping the reaction at the 1:2 stage. 3.9.2.5
With arenediazonium salts
TeCl4 in concentrated hydrochloric acid reacts with arenediazonium chlorides giving bis(arenediazonium) hexachlorotellurates that are decomposed by copper powder in acetone to give diaryltellurium dichlorides in low to medium yields.18
TeCl4
HCl H2O
H2TeCl6
[ArN2+]Cl-
[ArN2+]2TeCl62-
Ar = Ph, p -MeO, p -Me, p -ClC6H4
Cu acetone (21- 55%)
Ar2TeCl2
Bis(p-methoxyphenyl)tellurium dichloride (typical procedure).18 TeCl4 (27 g, 0.1 mol) or TeO2 (16 g, 0.1 mol) dissolved in concentrated HCl (75 mL) is added to a stirred solution of (p-MeOC6H4N2)⫹Cl⫺ (0.2 M, from aminobenzene (24.6 g, 0.23 mol), half-concentrated HCl (150 mL) and NaNO2 (14 g. 0.21 mol) in H2O (20 mL)) at ⫺5°C. The mixture is stirred at ⫺5°C for 20 min and then filtered. The filter cake is washed successively with acetone (3⫻50 mL), ether and petroleum ether. The diazonium hexachlorotellurate product is dried in air (52.8 g (86%)). Of the above product, 18.3 g (30 mmol) is carefully ground and suspended in acetone (95 mL). The suspension is vigorously stirred at ⫺15°C while Cu powder (11.5 g, 180 mmol) is added over 40 min (the temperature must not exceed ⫺10°C). The mixture is stirred for a further 20 min and is then allowed to warm at 20°C. The dark-coloured mixture is filtered to remove CuCl, the filter cake is washed with acetone and the filtrate and washings are combined. The acetone solution is warmed at 20°C until a grey precipitate forms. The precipitate is collected and extracted repeatedly with boiling toluene. Activated charcoal is added to the toluene extracts, the mixture is heated at reflux and filtered and most of the toluene is distilled from the filtrate. Petroleum ether is added to precipitate the product (p-MeOC6H4)2TeCl2, which is recrystallized from benzene (6.8 g (52%); m.p. 182°C). 3.9.3 From organyltellurium trihalides Like tellurium tetrachloride, aryltellurium (and alkyltellurium) trichlorides (and tribromides) undergo condensation reactions with reactive organic substrates or metalloorganic reagents as well as addition reactions to C⫽C bonds, giving rise to tellurium dichlorides.
60
3.9.3.1
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
With ketones O
O
(ref. 19 - 22)
ArTeCl3 +
ArTeCl2 Ar = p -MeOC6H4, p -EtOC6H4, p -PhOC6H4 ketone = acetone, acetophenone, pinacolone, cycloalkanones
The reaction can be performed by simply maintaining a mixture of the trichloride and excess ketone (1:3) at room temperature, or by refluxing equimolar amounts of the reagents in benzene. Alkyltellurium trichlorides give only low yields of the products. Aryltellurium tribromides are generally less reactive towards ketones. MeOC4H4Te(Br2)CH2COPh was prepared by this method.19 Improved reaction times and yields are achieved employing ketone silyl enol ether.20–22 OSiMe3 Ar(R)TeCl3 +
benzene, reflux
TeCl2Ar(R)
[Ar = p -MeOC6H4] OMe R = Ph
O
OMe , n -C6H13
ketone = acetone, pinacolone, cycloalkanones
(p-Methoxyphenyl)phenacyltellurium dichloride (typical procedure).19 p-Methoxyphenyltellurium trichloride (0.34 g, 1 mmol) and acetophenone (0.36 g, 3 mmol) are intimately mixed and allowed to stand for 48 h. During this time the product crystallizes and is then washed thoroughly with ether and successively with a small volume of cold methanol. The crude dichloride is recrystallized from benzene/petroleum ether 30–60°C (0.25 g (60%); m.p. 136–137°C). (p-Methoxyphenyl)pinacolyltellurium dichloride (typical procedure).21 A mixture of p-methoxyphenyltellurium trichloride (1.020 g, 3 mmol) and pinacolone trimethylsilyl enol ether (0.516 g, 3 mmol) in benzene (10 mL) is heated under reflux. The reaction is monitored by TLC. After 10 h the mixture is treated with MeOH/H2O (1:1, 100 mL) and then extracted with CHCl3 and the organic layer is then dried (MgSO4) and evaporated. The residual oil is filtered on an SiO2 pad (eluting with CHCl3). The product is recrystallized from CHCl3/petroleum ether 30–60°C (0.97 g (80%); m.p. 90–92°C). 3.9.3.2
With alkenes
The addition of aryltellurium trichlorides to alkenes occurs with a high stereospecificity, giving exclusively anti-2-chloroalkyltellurium dichlorides,23–26 in contrast to the addition of tellurium tetrachloride which gives mixtures of syn and anti adducts
3.9 DIORGANYL TELLURIUM DIHALIDES
61
(see Section 3.5.1.2). R
R
Cl R H
+ ArTeCl3
H H R H Te(Cl2)Ar Ar = 2- naphthyl; olefin = propene, (E) - and (Z) - 2 - butenes, 1- decene, cyclopentene, cyclohexene
2-Chloroalkyl-2-naphthyltellurium dichloride (general procedure).24 2-Naphthyltellurium trichloride (2.98 g, 0.83 mmol) is heated under reflux with the olefin (1.2 mmol) in dry, ethanol-free CHCl3 (15 mL) until the trichloride has dissolved (0.5–1 h). Filtration from a small amount of elemental Te and evaporation gives an oil or a semi-solid that is recrystallized from a large amount of petroleum ether at 40–60°C. The reactions with propene and 2-butenes are performed in a sealed tube at 80°C. The yields are in the range 70–95%. In the presence of alcohols the addition of aryltellurium trihalides to alkenes gives rise to alkoxytelluration products.27–30 The addition is highly anti-stereospecific and regiospecific for terminal alkenes, tellurium moieties attacking exclusively the terminal carbon. The reaction is usually performed with aryltellurium tribromides, generated in situ by the treatment of the corresponding ditellurides with bromine (although trichlorides, ditellurides/CuCl2 and tellurocyanates/CuCl2 are also effective). R
R PhTeBr3 /R1OH
H
H
Cl R H R H Te(Br2)Ar
olefin = 1- hexene, 1- octene, 1 - decene, styrene, α - methylstyrene 2 - methyl-1-pentene, isobutylene, cyclopentene, cyclohexene, cycoheptene, cyclooctene
(2-Methoxycyclohexyl)phenyltellurium dibromide (typical procedure).28 To a solution of phenyltellurium tribromide (from diphenyl ditelluride (1.02 g, 2.5 mmol) and Br2 (1.20 g, 7.5 mmol) in MeOH (5 mL) is added cyclohexene (0.49 g, 6.0 mmol) and the mixture is heated under reflux for 1 h. By cooling the yellow solution at room temperature, the dibromide precipitates (1.45 g (61%); m.p. 169–171°C). 3.9.3.3
With arenes
Aryltellurium trichlorides and tribromides condense with aromatic compounds bearing electron-donating groups, giving unsymmetrical diaryltellurium dihalides.19 This electrophilic substitution therefore parallels that described for tellurium tetrachloride. ArTeX3 +
R1
r.t., -HX
X2TeAr
R1
R R representative examples: X = Cl, Br; Ar = p -MeOC6H4, p -EtOC6H4, p -PhOC6H4; R = H; R1 = NMe2; R = R1 = OH
62
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
p-Methoxyphenyl-p-dimethylaminophenyltellurium dichloride (typical procedure).19 p-Methoxyphenyltellurium trichloride (0.34 g, 1 mmol) and N,N-dimethylaniline (0.36 g, 3 mmol) are intimately mixed. After 24 h at room temperature, the mixture is extracted several times with MeOH leaving a yellow crystalline residue (0.32 g (75%)). Recrystallization from MeOH or benzene/MeOH gives the product as yellow prisms (m.p. 170–172°C (dec.)). 3.9.3.4
With organylmercury chlorides
The reaction of aryltellurium trichlorides with aryl- or alkylmercury chlorides is a wellestablished and general method for the preparation of unsymmetrical diaryl- or alkylaryltellurium dichlorides.31,32 Ar1HgCl, dioxane, -HgCl2.dioxane
ArTeCl2Ar1
Ar = p - MeO, p - PhOC6H4 Ar1 = Ph, 1-naphthyl, 2 -naphthyl
ArTeCl3 RHgCl, dioxane, -HgCl2.dioxane
ArTeCl2R
Ar = p -MeOC6H4; R = Et, PhCH2 Ar = 2- naphthyl; R = cyclohexyl, PhCH2
Unsymmetrical diaryltellurium dichlorides (general procedure).32 The aryltellurium trichloride (20 mmol) and the arylmercury chloride (20 mmol) are heated under reflux in dry dioxane (30 mL) for 1.5 h. The solution is cooled at 10°C and the HgCl2 dioxane precipitate so formed is filtered off and washed with a small volume of cold dioxane. The dioxane solution is then poured into 1% HCl (100 mL) with vigorous stirring. The formed oily product crystallizes by friction and is separated by filtration and then washed with cold EtOH. The reaction with ethyl- and cyclohexylmercury chlorides requires heating for 24 h. 3.9.4 By addition of halogens to diorganyl tellurides Diorganyl tellurides, which as shown in Section 3.1 are the primary products of several methods for the synthesis of organotellurium compounds, can easily be converted into the corresponding dihalides by the simple addition of halogens.
RTeR
X2
X X RTeR
X = Cl, Br, I
This reaction has a general character and can be applied to the different types of telluride.33 The halogenation is accomplished in inert solvents (ether, benzene, dichloromethane and chloroform) and the dihalides are normally easily crystallizable products. The chlorination of tellurides is more conveniently done by using, instead of chlorine (gaseous or dissolved in solvents), chlorinating reagents such as sulphuryl or thionyl chloride (like the chlorinolysis of ditellurides, see Section 3.5.2).
3.9 DIORGANYL TELLURIUM DIHALIDES
63
Diaryltellurium dihalides (general procedure).32 The diaryl telluride dissolved in a small amount of benzene or CHCl3 is treated dropwise, while cooling (ice bath) and stirring, with a solution of an equimolar amount of SO2Cl2, Br2 or I2 in the same solvent (in the case of SO2Cl2, evolution of SO2 is observed). By addition of a large excess of petroleum ether at 30–60°C (50 mL for 1 mmol) the dihalide precipitates as a crystalline solid (the dichlorides are colourless, the dibromides yellow and the diiodides red). The yields are quantitative. Representative examples of diaryltellurium dihalides prepared by the above method are ArTeX2Ar1 X = Cl, Br, I Ar = Ph; Ar1 = p -MeOC6H4, p -EtOC6H4, 1- and 2-naphthyl Ar = p -MeOC6H4, p -EtOC6H4; Ar1 = 1- and 2-naphthyl Ar = 1-naphthyl; Ar1 = 2 - naphthyl
Dibenzyl and arylbenzyl tellurides (like dibenzyl ditelluride, see Section 3.5.3) exhibit an unusual behaviour towards halogens, undergoing cleavage of the tellurium–benzyl bond.34,35
Ph
Te Ph
Ph
TeAr
Br2 X2
2 Ph Ph
Br + TeBr4 X + ArTeX3
X = Cl, Br, I
3.9.5 Additional methods 3.9.5.1
Reaction of elemental tellurium with arenediazonium salts36 [2ArN2+]Cl- + Te
3.9.5.2
Ar2TeCl2
Reaction of TeO2/LiCl with aryl hydrazines37 ArTeCl2 + 2 N2 + 2 H2O + 2 LiOH + Te
2 ArNHNH2 + 2 TeO2 + 2 LiCl
3.9.5.3
-N2
Reaction of diaryl ditelluride with arenediazonium salts/CuX238 (ArTe)2 + 2 [Ar1N2+]X-
X = Cl, Br
-N2
2 ArTeAr1
CuX2
2 ArTeX2Ar1
64
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
REFERENCES 1. Rheinboldt, H., in Houben-Weyl-Methoden der Organischen Chemie (ed. E. MulIer). 4th edn, Vol. IX, p. 1066. Georg Thieme, Stuttgart, 1955. 2. Thayer, J. S.; Smith, K. V. Synth. Inorg. Met. Org. Chem. 1973, 3, 101; see also Irgolic, K. J. Houben-Weyl-Methods of Organic Chemistry. 4th edn, Vol. E12b, pp. 525–526. Georg Thieme, Stuttgart, 1990. 3. Ziolo, R. F.; Gunther, W. H. H. J. Organomet. Chem. 1978, 146, 245. 4. Morgan, G. T.; Elvins, O. C. J. Chem. Soc. 1925, 127, 2625. 5. Rheinboldt, H. in Houben-Weyl-Methoden der Organischen Chemie (ed. E. Muller). 4th edn, Vol. IX, p. 1061. Georg Thieme, Stuttgart, 1955. 6. Morgan, G. T.; Drew, H. D. K. J. Chem. Soc. 1925, 127, 531. 7. Funk, H.; Weiss, W. J. Prakt. Chem. 1954, 1, 33. 8. Arpe, H. J.; Kuckertz, H. Angew. Chem. (Engl.) 1971, 10, 73. 9. Ogawa, M.; Ishioka, R. Bull. Chem. Soc. Jpn. 1970, 43, 496. 10. Ogawa, M. Bull. Chem. Soc. Jpn. 1968, 41, 3031. 11. Bergman, J.; Engman, L. J. Am. Chem. Soc. 1981, 103, 5196. 12. Morgan, G. T.; Kellett, R. E. J. Chem. Soc. 1926, 1080. 13. Morgan, G. T.; Drew, R. D. J. Chem. Soc. 1925, 127, 2301. 14. Bergman, J. Tetrahedron 1972, 28, 3323. 15. Irgolic, K. J. Houben-Weyl-Methods of Organic Chemistry. 4th edn, Vol. E12b, p. 529, Table 16. Georg Thieme, Stuttgart, 1990. 16. Gunther, W. H. H.; Nepywoda, J.; Chu, J. Y. C. J. Organomet. Chem. 1974, 74, 79. 17. Petragnani, N.; Comasseto, J. V.; Varella, N. H. J. Organomet. Chem. 1976, 120, 315. 18. Sadekov, L. D.; Minkin, V. I. Dokl. Akad. Nauk. USSR 1971, 197, 316. 19. Petragnani, N. Tetrahedron 1961, 12, 219. 20. Sadekov, I. D.; Maksimenko, A. A.; Rivkin, B. B. J. Org. Chem. USSR 1978, 14, 810. 21. Stefani, H. A.; Comasseto, J. V.; Petragnani, N. Synth. Commun. 1987, 17, 443. 22. Stefani, H. A.; Chieffi, A.; Comasseto, J. V. Organometallics 1991, 10, 1178. 23. Moura Campos, M.; Petragnani, N.Tetrahedron 1962, 18, 521. 24. Backwall, J. E.; Bergman, J.; Engman, L. J. Org. Chem. 1983, 48, 3918. 25. Bergman, J.; Engman, L. Tetrahedron 1980, 36, 1275. 26. Uemura, S.; Fukuzawa, S. J. Organomet. Chem. 1984, 268, 223. 27. Uemura, S.; Fukuzawa, S.; Toshimitsu, A.; Okano, M. Tetrahedron Lett. 1982, 23, 1177. 28. Uemura, S.; Fukuzawa, S.; Toshimitsu, A. J. Organomet. Chem. 1983, 250, 203. 29. Uemura, S.; Fukuzawa, S. J. Am. Chem. Soc. 1983, 105, 2748. 30. Uemura, S.; Fukuzawa, S. J. Chem. Soc. Perkin Trans. 1985, 1, 471. 31. Petragnani, N. Tetrahedron 1961, 12, 219. 32. Rheinboldt, H.; Vicentini, G. Chem. Ber. 1956, 89, 624. 33. For a large literature coverage upon addition of halogens to organyl tellurides, see Irgolic, K. J. Houben-Weyl-Methods of Organic Chemistry. 4th edn, Vol. EI2b, Section 5.1, p. 553. Georg Thieme, Stuttgart, 1990. 34. Vicentini, G. Chem. Ber. 1958, 91, 801. 35. Spencer, H. K.; Cava, M. P. J. Org. Chem. 1977, 42, 2937. 36. Taniyama, H.; Miyoshi, F.; Sakakibara, E.; Uchida, H. Yakugaku Zasshi 1957, 77, 191; Chem. Abstr. 1951, 51, 10407. 37. Bergman, J.; Engman, L. Z. Naturforsch. B 1980, 35, 882. 38. (a) Sadekov, I. D.; Maksimenko, A. J. Org. Chem. USSR 1978, 14, 2411. (b) Sadekov, I. D; Maksimenko, A.; Rivkin, B. B. J. Org. Chem. USSR 1983, 19, 541.
3.10
DIORGANYL TELLUROXIDES
65
3.10 DIORGANYL TELLUROXIDES Diorganyl tellurides are easily oxidized to the corresponding telluroxides. Dialkyl tellurides are especially sensitive to oxidation, and their exposure to air, either neat or in solution, causes the formation of dialkyl telluroxides. Diaryl tellurides are much more stable and are oxidized only by chemical methods. Diaryl telluroxides have recently attained outstanding importance as mild and selective oxidizing reagents (see Section 4.4.1). Two methods are well established and generally employed to prepare diaryl telluroxides. 3.10.1 Hydrolysis of diaryltellurium dihalides This method, which dates from the early German tellurium chemistry1 and is today widely employed,2 uses aqueous sodium hydroxide or ammonia as hydrolytic reagents. Ar2TeX2
-OH H2O
Ar2TeO
Di-p-anisyl telluroxide (typical procedure).2 Di-p-anisyltellurium dichloride (8.00 g, 23 mmol) is stirred at 95°C in 5% aqueous NaOH (100 mL) for 1 h. After cooling at 0°C the white solid is separated by filtration, washed with cold H2O (3⫻10 mL) and dried under vacuum over P2O5 giving the telluroxide (5.60 g (81%); m.p. 187–189°C). 3.10.2 Oxidation of diaryl tellurides Sodium periodate3 or positive halogenanting species such as N-chlorosuccinimide and t-butyl hypochlorite4 are useful oxidizing reagents. NaIO4 solvent, reflux
Ar2TeO
Ar2Te NCS or t -BuOCl
Ar2TeCl+
H2O
Ar2TeO + NCS
Di-p-anisyl telluroxide (typical procedure).3 Di-p-anisyl telluride (0.80 g, 2.3 mmol) and NaIO4 (0.50 g, 2.3 mmol) in CH3CN/MeOH/H2O (100 mL, 1:1:1) are heated under reflux for 2 h. The mixture is then cooled, treated with H2O (100 mL) and extracted with CHCl3 (3⫻30 mL). The extracts are evaporated and the residue chromatographed on SiO2 (elution with CHCl3/MeOH, 9:1). The crude product is recrystallized from benzene (0.26 g (22%); m.p. 189–191°C). Di-(2,4,6-Me3C6H2)2TeO is also prepared by the above procedure (yield 95%).
66
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
REFERENCES 1. (a) Lederer, K. Ber. Dtsch. Chem. Ges. 1916, 49, 345, 2532, 2663. (b) Lederer, K. Ber. Dtsch. Chem. Ges. 1920, 53B, 1674. 2. Ley, S. V.; Meerholz, C. A.; Barton, D. H. R.Tetrahedron 1981, 37, 213. 3. Akiba, M.; Lakshmikantham, M. V.; Jen, K. Y.; Cava, M. P. J. Org. Chem. 1984, 49, 4819. 4. Detty, M. R. J. Org. Chem. 1980, 45, 274.
3.11
TELLUROESTERS
Telluroesters (acyltellurides), a class of compounds of promising synthetic utility1 have been synthesized in good to high yields by the following methods. (a)
Reaction of sodium,2–4 bromomagnesium5 or lithium2 organyl tellurolates with aroylchlorides and (in the case of sodium tellurolates) with aliphatic acid anhydrides.2
ArTeTeAr
NaBH4 MeOH or EtOH
ArMgBr + Te
THF
RCO)2O
ArTeNa
ArTeCOR R = Me, Et
Ar1COCl
ArTeCOAr1
ArTeMgBr
Ar, Ar1 = Ph; Ar = 4- and 2-substituted Ph; Ar1 = Napht
BuLi + Te
(b)
ether
BuTeLi
PhCOCl
BuTeCOPh (20%)
Reaction of acylchlorides with sodium telluride6 followed by treatment of the formed sodium acyltellurolates with alkyl iodides. RCOCl + Na2Te
THF
1 RCOTeNa R I
RCOTeR1 (60-84%)
R = Ph, p -MeOC6H4, p -MeC6H4, PhCH2, 1-Napht, 2-Napht, C17H35 R1 = Me, i -pr, n -Bu
(c)
Reaction of phenyltrimethylsilyl telluride with aroylchlorides.7 PhTeLi + Me3SiCl
PhTeSiMe3
Ar = Ph and p -substituted Ph
Ar1COCl -Me3SiCl
PhTeCOAr (62-91%)
3.11
(d)
TELLUROESTERS
67
Reaction of aldehydes with i-Bu2AlTeBu, prepared in situ from dibutyl telluride and diisobutyl aluminium hydride in hexane.1 O R
i -Bu2AlTeBu H hexane,1h
R
TeBu
R = Ph, 2-Naphthyl (71, 73%) R = n -C8H17, t -Bu (36, 27%)
Butyl telluroesters are obtained satisfactorily from aromatic aldehydes, the yield being improved appreciably by the addition of Et2AlCl, whereas aliphatic aldehydes are less efficient and Et2AlCl is ineffective. The reaction probably proceeds via the addition of i-Bu2AlTeBu to aldehyde to form an adduct which then undergoes an intramolecular hydride shift giving the telluroester. The role of the Et2AlCl is unclear.
O Ph
OAlBu2
i-Bu2AlTeBu H
Ph
Ph BuTe
O
AlBu2 H
O PhCHO
TeBu-i
Ph BuTe
AlBu2 O H H
Ph
O
O Ph
Ph
TeBu
+
Ph
OAlBu2
Formation of telluroesters (typical procedure).4 Bis(p-fluorophenyl) ditelluride (450 mg, 1.0 mmol) was dissolved in THF (8 mL) with stirring at room temperature and treated with NaBH4 (150 mg, 4.0 mmol). MeOH (~1 mL), was added dropwise to this suspension which was then stirred vigorously until a light yellow solution formed. Benzoyl chloride (300 mg, 2.2 mmol) was then added dropwise and the resulting mixture stirred for a further 30 min. The reaction was quenched by addition of degassed water (5 mL), and extracted into benzene (3⫻30 mL), and the combined extracts dried (Na2SO4), and concentrated to give a pale yellow oil which solidified on standing in the freezer (660 mg, 100%) and which was sufficiently pure for use in subsequent experiments. An anaytical sample was obtained by recrystallization from hexanes: m.p. 60–61°C. Preparation of aryl telluroesters (general procedure).5 Aryl Grignard reagent was prepared in 20 mL anhydrous THF from magnesium (0.24 g, 10 mmol) and aryl bromide (10 mmol) according to standard method. Tellurium powder (1.02 g, 8mmol) was added to the Grignard reagent solution in one portion under N2. The mixture was refluxed for 2h, then cooled to room temperature. The solution of acyl chloride (10 mmol) in 10 mL anhydrous ethyl Et2O was added in drops at room temperature, then stirred for 4 h at the same temperature. Filtered away the unreacted tellurium powder and washed it with Et2O (20 mL), then added NH4Cl solution (40 mL) to the filtrate. Separated the organic phase, the water phase was extracted with Et2O (3⫻20 mL). The combined organic phase was washed with water (2⫻50 mL), dried with Na2SO4. The solvent was removed in vacuo and the residue was recrystallized from Et2O–petroleum ether (30–60°C), giving the yellow solid product.
68
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
Typical procedure.7 Phenyltellurotrimethylsilane (2.10 mL, 10.9 mmol) was added into astirred solution of benzoyl chloride (1.42 g, 10.1 mmol) in 30 mL of dry tetrahydrofuran under an argon atmosphere. The mixture was stirred for 3 h at room temperature and concentrated under a reduced pressure. The residual Te-phenyl tellurobenzoate was purified by recrystallization from pentane to give yellow needles. Yield: 2.71 g (87%). Reaction of benzaldehyde with iBu2AlTeBu (typical procedure).1 In a flame-dried flask equipped with an Ar inlet and a rubber septum was placed n-BuTeTeBu-n (185 mg, 0.5 mmol). After iBu2AlH (1 N in hexane, 1 mL) was added under Ar, the solution was stirred at 25°C for 1 h and then 2 mL of THF was added. The solution was cooled to ⫺23°C and 2 mmol of benzaldehyde and 0.5 mL of Et2AlCl (1 N in hexane) were injected. The mixture was gradually warmed to 25°C, stirred for another 1 h and poured into saturated NH4Cl solution. Products were extracted with Et2O (3⫻30 mL), dried over MgSO4 and concentrated in vacuo. Medium pressure liquid chromatography (MPLC) of the residue gave pure Te-butyl tellurobenzoate in 71% yield (205 mg) in a hexane/Et2O (100:1) fraction. REFERENCES 1. 2. 3. 4.
Inoue, T.; Takeda, T.; Kambe, N.; Ogawa, A.; Ryu, I.; Sonoda, N. J. Org. Chem. 1994, 59, 5824. Piette, J. L.; Renson, M. Bull. Soc. Chim. Belg. 1970, 70, 383. Gardner, S. A.; Gysling, H. J. J. Organomet. Chem. 1980, 197, 111. Crich, D.; Chen, C.; Hwang, J. T.; Yuan, H.; Papadatos, A.; Walter, R. I. J. Am. Chem. Soc. 1994, 116, 8937. 5. Zhao, C. Q.; Huang, X. Synth. Commun. 1997, 27, 249. 6. Kanda, T.; Nakaiida, S.; Murai, T.; Kato, S. Tetrahedron Lett. 1989, 30, 1829. 7. Sasaki, K.; Aso, Y.; Otsubo, T.; Ogura, E. Chem. Lett. 1986, 977.
3.12
ARYL TELLUROFORMATES
Aryl telluroformates have been prepared by the following methods: (a) (b)
Reaction of aryl tellurols with alkyl chloroformates. Reaction of aryl tellurols with alkyl chloroformates prepared in situ from alcohols and COCl2.1 O ArTeTeAr
1) NaBH4, THF
[ArTeH]
2) MeOH
ROH + COCl2
THF
a) RO
O Cl
RO
TeAr
b) ROCOCl
a) Ar = Ph, p -FC6H4, p-MeOC6H4 R = Me, i -Bu 83-93%
b) Ar = Ph, p -FC6H4 R = c-hex, n -C8H17, 3-β-cholesteryl, 3-β-cholestanyl 70-98% Ar = Ph; R = PhCH2 (60%)
3.12
ARYL TELLUROFORMATES
69
Method a (typical procedure).1 Sodium borohydride (113 mg, 3.0 mmol) was added with stirring to a solution of diphenyl ditelluride (420 mg, 1.0 mmol) in THF (30 mL). The reaction vessel was purged with N2, and methanol (~250 mL) was added dropwise until the red solution turned colourless (30 min). When the evolution of hydrogen had ceased (~60 min), methyl chloroformate (208 mg, 2.2 mmol) was added via syringe, and the resulting mixture was stirred for a further 60 min. Water (10 mL) was added, and the mixture was extracted into ether (3⫻50 mL). The combined ether extracts were dried (MgSO4) and the solvent removed in vacuo to afford a yellow oil. Pure product (480 mg, 91%) was obtained after Kügelrohr distillation (50–60%/0.075 mmHg). (c)
Reaction of aryl tellurotris(trimethylsilyl)silane, generated in situ from the corresponding aryl tellurocyclohexane and tris(trimethylsilyl)silane with chloroformates in the presence of tetrakis-(triphenylphosphine) palladium. The same procedure, performed with acyl chlorides, affords telluroesters.2,3 ArTec- hex + HSi(SiMe3)3
benzene AIBN
[ArTeSi(SiMe3)3] (Ph3P)4Pd
RCOCl
O RO
O
Cl
O
TeAr R 59-87% R = Me, Ph
ArTe OR (61-79%) R = Me, i -Bu, c-hex, Ph
Method c (typical procedure).3 Tris(trimethylsilyl)silane (110 L, 89 mg, 360 mol) and 2,2⬘-azobisisobutyronitrile (AIBN) (ca. 1 crystal) were added to a solution of (phenyltelluro)cyclohexane (103 mg, 360 mol) in benzene (900 L). The reaction vessel was sealed (septum), purged with nitrogen and heated at 80°C, for 2 h while it was shielded from background light. After the mixture cooled to room temperature, tetrakis(triphenylphosphine)palladium (21 mg, 18 mol) and methyl chloroformate (28 mg, 23 L, 358 mol) were added, and the mixture was briefly shaken vigorously and allowed to stand at room temperature (25°C), while it was shielded from light, for 6 h. At which time TLC analysis revealed the presence of a dominant product. The solvent was removed in vacuo and the residue separated by flash chromatography (30:1, petroleum ether/ethyl acetate) to afford the telluroformate as a yellow oil which exhibited properties identical to those reported previously (61 mg, 80%).
REFERENCES 1. Lucas, M. A.; Schiesser, C. H. J. Org. Chem. 1996, 61, 5754. 2. Schiesser, C. H.; Skidmore, M. A. J. Chem. Soc. Perkin Trans. 1 1997, 2689. 3. Schiesser, C. H.; Skidmore, M. A. J. Org. Chem. 1998, 63, 5713.
70
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
3.13
TELLUROGLUCOPYRANOSIDES
The reaction of protected ,D-glucopyranosyl bromides with sodium arene tellurolates gives rise to the corresponding telluro -D-glucopyranosides.1 OY
OY O
PhTeNa PhTeTePh/NaBH4 OYBr EtOH
YO YO
YO YO
O OY TePh (93%)
Y = Ac, PhCO
REFERENCE 1. Stick, R. V.; Tilbrook, D. M. G.; Williams, S. J. Aust. J. Chem. 1997, 50, 233.
3.14
WATER-SOLUBLE DIORGANYL TELLURIDES
Water-soluble diorganyl tellurides with thiolperoxidase and autoxidant activity have been prepared as depicted in the following scheme.1 HO
Te
OH
1) MOH (2 equiv) 2) HO(CH2)3SO3H(2,3 equiv)
Te2)
O (CH2)3SO3H
M = Li, Na, K, NMe4
REFERENCE 1. Kanda, T.; Engman, L.; Cotgreave, I. A.; Powis, G. J. Org. Chem. 1999, 64, 8161.
3.15
DIHALOARYLTELLURO CYCLOPROPANES
Dihalocarbenes generated under phase transfer catalysis add to vinylic tellurides to give the corresponding gem-dihaloaryltelluro cyclopropanes.1 R H
TeAr CHX3 / MOH TEBA, r.t. H
X
X
R TeAr (75 - 87%) R = Ph Ar = Ph, p -MeC6H4, 1-naphthyl X = Cl; M = Na X = Br; M = K
3.16
VINYLIC TELLURIDES AND DITELLURIDES
71
REFERENCE 1. Huang, X.; Jiang, S. H. Synth. Commun. 1993, 23, 431.
3.16
VINYLIC TELLURIDES AND DITELLURIDES
These classes of tellurium compounds are treated separately because of their peculiar behaviour as synthons and intermediates of fundamental organic transformations.1 Leading examples of such performance are the transmetallation reactions of (Z)-vinylic tellurides, easily generated by the hydrotelluration of alkynes, leading to (Z)-vinyl organometallic reagents, which are difficult to obtain by other currently available methods. It is worth mentioning that the sequence hydrotelluration of acetylenes/transmetallation complements the classical sequence hydrostannillation of acetylenes/transmetallation, which lead to (E)-vinylic organostannates. 3.16.1 Starting from nucleophilic tellurium 3.16.1.1
Addition of alkali tellurides to acetylenes
Elemental tellurium, treated with strong aqueous alkali, undergoes an oxido-reduction disproportionation giving the corresponding telluride ion which reacts with acetylenes to give divinylic tellurides in modest yields.2,3
4Te°
Base H2O
Te6+ + 3Te2-
HC CH 54%
Te
Simple systems such as KOH/H2O/DMSO and KOH/H2O/HMPA at 100–120°C under pressure have been used. The yields were markedly increased by the addition of a reducing agent such as SnCl2.4 The reaction of elemental Te, phenylacetylene, KOH in hydrazine hydrate/ water/toluene was performed under three-phase catalytical system (in the presence of AlK3N⫹MeCl⫺) giving (Z,Z)-distyryl telluride in 50% yield.5,6 In the presence of alkyl halides under pressurized acetylene, alkylvinyl tellurides in medium to good yields are obtained along with variable amounts of divinyl and dialkyl tellurides.7,8
Te + HC CH + RX
KOH/ H2O/SnCl2 105 -115°C
RTe
+
Te
+ RTeR
(65-70%)
Reaction of acetylene with Te-KOH-HMPA triad.3 A mixture of Te (19.2 g), KOH (16.8 g), H2O (8 mL) and HMPA (165 mL) was heated (110–120°C) in a 1 L steel autoclave under initial acetylene pressure of 10 atm (21 L of C2H2 in total) for 6 h. The reaction mixture was
72
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
distilled to give 11.1 g (54.3%) of divynyl telluride, based on the equation: 4Te°→3Te2⫺⫹Te4⫹, b.p. 131–132°C. Reaction of vinylacetylene with Te-KOH-DMSO triad.3 A mixture of Te (25.9.), KOH (20 g), H2O (10.9 mL) and DMSO (100 mL) was heated (110°C) with vinylacetylene (31.7 g) in 1 L steel-rotating autoclave for 3 h. The reaction mixture was poured into water, and extracted with Et2O. The extracts were washed with H2O. The solvent was stripped off and the residue was distilled in vacuum to collect the run with b.p. 80–86°C (2.2 g) consisting of bis(1,3-butadienyl) telluride (1.1 g). Reaction of phenylacetylene with Te/KOH/SnCl2.6 A mixture of 6.4 g of tellurium, 42 g of potassium hydroxide, 22.6 g of SnCl2·2H2O, 10.2 g of phenylacetylene, 20 mL of toluene, 60 mL of water and 1.2 g of Adogen 464 was heated (80–97°C) with vigorous stirring for 7 h. The organic layer was separated, and the aqueous layer was extracted with benzene. The benzene was removed under vacuum. The residue was dissolved in a small amount of ether, poured into 200 mL of isopropyl alcohol, and placed in the refrigerator for 3 days. The yellow crystals of distyryl telluride (2.5 g, yield 15%) and the red needle crystals of distyryl ditelluride (0.7 g, yield 6%) were separated. Reaction of phenylacetylene with Te/KOH/N2H4⫻H2O.5 (Z,Z)-distyryl telluride. A mixture of Te (12.8 g), phenylacetylene (20.4 g), KOH (84 g), N2H4⫻H2O (120 mL), H2O (24 mL), toluene (40 mL), and AlK3N⫹MeCl⫺ (1 g) was heated (100–110°C) with a stirring of 6 h. The mixture was diluted with water and extracted with benzene. The organic layer was washed with water, dried over K2CO3 and evaporated. The residue was dissolved in ether, the ether solution was poured into ethanol and put into refrigerator. After several days yellow cristals of the telluride (16.7 g, 50% yield) were separated and dried. Preparation of alkylvinyl tellurides by reaction of Te/KOH/alkyl iodides, SnCl2 in HMPA/H2O with pressurized acetylene. Methylvinyl telluride.8 12.8 g of Te, 1.42 g of methyl iodide, 48.7 g KOH, 24.7 g SnCl2, 80 mL HMPA and 70 mL H2O were heated (105–115°C) in a rotating autoclave 1 L under acetylenic pressure (initial pressure 14 atm, residual pressure 7 atm, absorbed acetylene 0.8 mol) tor 5 h. The reaction mixture is evacuated at 1 mmHg. The fraction (10.5 g) collected into a cooled trap (⫺70°C) contains, according to GLC data, methylvinyl telluride (0.34 g, yield 20%), divinyl telluride (10 g, yield 55%) and dimethyl telluride (0.12 g, yield 8%); b.p. 115–116°C. Actually, the greatest practical facilities, the most general applicability and the highest yield to prepare bisvinylic tellurides from elemental Te and acetylenes are achieved by using NaBH4 to generate the telluride anion.9 Te
1) NaBH4 / H2O/EtOH /THF reflux 2) 2 RC CH
R = alkyl, vinyl, aryl
R
Te R (64-98%)
Divinyl tellurides (typical procedure).9 Sodium borohydride (0.34 g, 9 mmol) was added in small portions to a stirred suspension of tellurium (0.383 g, 3 mmol) in ethanol (15 mL)
3.16
VINYLIC TELLURIDES AND DITELLURIDES
73
kept under nitrogen. The mixture was heated. Sodium hydroxide (0.32 g, 8 mmol), water (15 mL) and tetrahydrofuran (5 mL) were added to the hot mixture, which was then refluxed for 15 min. The reaction mixture turned dark violet. The mixture was refluxed until all the tellurium had disappeared. The heat source was removed and the acetylene (7.8 mmol) added. The mixture was then refluxed and monitored by TLC. When the mixture had turned yellow, it was cooled to room temperature, diluted with ethyl acetate (50 mL), and washed first with a saturated solution of ammonium chloride (3⫻30 mL) and then with brine (3⫻30 mL). The organic phase was separated, dried (MgSO4), and filtered. The solvent was evaporated from the filtrate in a rotatory evaporator at 20 mmHg and the residue purified by flash chromatography on silica gel with hexane/ethyl acetate. Alkyl vinyl tellurides can also be prepared by a sequential reaction of divinylic tellurides with lithium and alkyl halides in liquid ammonia.8,10 Te
1) Li 2) RX, NH3 liq.
RX = MeI, EtBr, PrBr
3.16.1.2
RTe 30 - 60%
From organyl tellurols or tellurolates and terminal acetylenes
Alkyl- and aryltellurols generated in situ by the well-established reduction of ditellurides with NaBH4/EtOH add to terminal acetylenes, giving (Z)-vinylic tellurides.9,11–13
RTeTeR
NaBH4 EtOH
1 [RTeH] R
H EtOH (36-93%)
RTe H
R1 H
R = n -Bu; R1=Ph, CH2OTHP, H2CN O R = p -MeOC6H4; R1 = n-pentyl R =Ph; R1 = Ph, CH2OH, CO2Et R = Ph; R1 = Ph, p -MeC6H4, p -MeOC6H4, p -ClC6H4, o -ClC6H4, m -H2NC6H4
The addition of the tellurium occurs exclusively at the terminal carbon of phenylacetylene, whereas a minor amount (11–28%) of the 2,2-disubstituted adduct (RTeR⬘C⫽CH2) is formed in addition to alkylacetylenes. 1-Phenyltelluro-2-phenylethene (typical procedure).11 To a solution of diphenyl ditelluride (2.05 g, 5 mmol) in EtOH (10 mL) is added a solution of NaBH4 (0.50 g, 13.2 mmol) in EtOH (10 mL) at room temperature under N2. The orange colour of the solution changes to pale yellow. Phenylacetylene (1.1 g, 10.8 mmol) is then added to the resulting solution and the mixture is stirred under reflux for 20 h. After cooling, the mixture is treated with brine and extracted with CHCl3, (3⫻50 mL) and the extract dried (MgSO4). Evaporation of the solvent gives a yellow-orange oil, which is purified by column chromatography on SiO2 (elution with hexane/EtOAc, 10:1), giving the crude product (R⫽R1⫽Ph) as a yellow solid (2.15 g (70%)). It is recrystallized from EtOH (m.p. 43–44°C).
74
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
Useful systems for the reduction of ditellurides to the corresponding tellurolates are formamidine sulphinic acid (HN⫽C(NH2)SO2H), TUDO, in 50% aqueous NaOH under phase transfer catalysis,12 KOH/H2O/DMSO/SnCl214 or KOH/H2O/DMSO/N2H4.15 In this context, a valuable improvement has been introduced by substituting the tedious generation of sodium butyl tellurolate from the non-commercially available n-dibutylditelluride for n-butyl tellurolate easily generated in situ from n-butyllithium and elemental tellurium.16 n -BuLi + Te
THF r.t., 5 min
n -BuTeLi
R H EtOH, reflux
R
TeBu-n
Typical procedure for the hydrotelluration with n-BuLi/Te.16 n-BuLi (0.66 mL, 1 mmol of a 1.5 M solution in hexane) is added dropwise to a stirred suspension of elemental tellurium (0.127 g, 1 mmol) in THF (5 mL) at room temperature under N2. A clear solution is formed after 5 min of stirring. Then phenylacetylene (0.122 g, 1.2 mmol) in deoxygenated ethanol (10 mL) is added and the solution is refluxed for 4 h, monitoring by TLC. After this time the mixture is diluted with ethyl acetate (20 mL) and washed with brine (2⫻20 mL). The organic layer is separated, dried (MgSO4) and the solvent is evaporated. The residue is purified by silica gel column chromatography eluting with hexane to give 0.215 g (75%) of the vinylic telluride. When the reaction is performed in a 40 mmol scale, the yield rises to 88%. The above-described hydrotelluration have been successfully applied to conjugated enines and diines,9,17 functionalized alkynes and diines,18–22 providing a useful method for the synthesis of organotelluro 1,3-butadienes, organotelluro 1,3-enines and functionalized vinylic tellurides with the Z configuration at the newly formed C⫽C bond.
R1 R
R = n -Bu
RTeTeR
R2 n-BuTeTeBu-n R3 NaBH4, EtOH reflux
n -BuTe
R1
R
R2 R3
R1 = R2 = H; R3 = MeO, TeBu-n R2 = H; R1 = Me; R3 = CH2OH R2 = CH2OH; R1 = H; R3 = TeBu-n R3 = H; R1 = R2= (CH2)4
NaBH4 EtOH
[RTeH]
R1 R1 EtOH (68-93%)
(1)
(ref. 17)
R1 RTe
(2) R1
R1, R2 = H, CH2OH, Me, Ph, p -MeC6H4, p -MeOC6H4 R = n -Bu R1 = H, Me, CH2OH, Me2COH; R2 = Ph R1 = H, CH2OH; R2 = C6H13
(ref. 18,19)
3.16
VINYLIC TELLURIDES AND DITELLURIDES
75
( )n
Te
R
n -BuLi THF, 25°C
SPh
[n -BuTeLi]
R1TeTeR1
OR H EtOH, reflux
R1Te
Me3Si
Et3Si
SPh
main product R = THP n = 1-9
SPh 1) n -BuLi
R H (82-85%)
NaBH4, EtOH reflux 1= n -Bu, Ph R, R
( )n OR +
n -BuTe
2) H2O
n -BuTeTeBu-n NaBH4, EtOH reflux
OH n -BuTeTeBu-n NaBH4, EtOH reflux
R1Te
( )n OH main product R = H, n = 1
H
SPh
R
H
SPh
R H (79%)
Et3Si
TeBu-n
(3) (ref. 20)
(4) (ref. 21)
(5) (ref. 21)
OH TeBu-n (84%)
(6) (ref. 22)
Noteworthy is that by treating tellurothioalkene with n-BuLi, the phenylthio group remains untouched, showing the greater reactivity of vinyltellluride towards vinylsulphide (eq. (4)). The silylsubstituted thioacetylene gives only the butyltellurophenylthioethene resulting from a desilylation – hydrotelluration (eq. (5)). 1-Organyltelluro-1,3-butadienes (general procedure).9 To a solution of the conjugated enyne (4.0 mmol) and the ditelluride (1.0 mmol) in EtOH (6.0 mL) at room temperature under N2 is added NaBH4 (0.09 g, 2.5 mmol) in small portions. Towards the end of the addition, when the red colour has disappeared, the mixture is refluxed for 5 h, successively cooled at room temperature, treated with H2O (0.5 mL) and then with 10% aqueous NaOH (0.5 mL). The resulting mixture is diluted with ether (50 mL) and washed with brine (3⫻30 mL). The organic layer is separated, dried (MgSO4) and evaporated in a rotary evaporator (20 torr). The residue is purified by SiO2 flash chromatography (elution with heptane or heptane/EtOAc). (Z)-1-butyltelluro-1,4-(bis-hydroxymethyl)but-1-en-3-yne (typical procedure).18 To a solution of (1,6-dihydroxy)hexa-2,4-diyne (0.11 g, 1.0 mmol) and dibutyl ditelluride (0.184 g, 0.5 mmol) in 95% EtOH (20 mL) under N2 is added NaBH4 (0.045 g, 1.25 mmol) at room temperature. After the disappearance of the red colour, the yellow solution is refluxed for 15 min, allowed to reach room temperature, diluted with EtOAc (40 mL) and washed with brine (3⫻20 mL). After drying the organic phase (MgSO4), the solvent was evaporated under vacuum and the residue purified by SiO2 flash chromatography (elution with hexane/EtOAc, 7:3) to give the product (0.21 g (71%)). Another application of the above hydrotelluration protocol involves the synthesis of unsymmetrical divinyl tellurides by the addition of sodium vinylic tellurolates, generated
76
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
by the reaction of the corresponding ditelluride with sodium borohydryde in aqueous ethanolic solution of sodium hydroxide to terminal acetylenes.9 R1
NaBH4 NaOH/EtOH Te2 R1
R1
R1
R
H
TeNa EtOH, reflux (65-77%)
Te
R1
R = H; = p-ClC6H4 R = Me; R1 = Ph, p-BrC6H4
In neutral conditions, the reduction of the divinyl ditellurides to the corresponding dialkyl ditellurides occurs preferentially to the hydrotelluration reaction.23 R1 R1 R
R Te Te
R = R1 = H R = H; R1 = Me R = Me; R1 = H
1) NaBH4 /EtOH reflux, N2 2) air (67 - 83%)
R1 R1 R
R Te Te
The actual reducing agent of the C⫽C bond seems to be the intermediate tellurol, present if the hydrogenolysis of the Te–Te bond is effected in a neutral medium. In the presence of OH⫺ the tellurol is converted into tellurolate, which does not react with the double bond. Telluroesters have also been employed as starting materials in telluro vinylation reactions. Thus, by treatment of telluroesters with aryl propiolates in the presence of K2CO3, (Z)--acyltellurocinnamates are formed in high yields. This procedure involves the addition of potassium aryltellurolate anions derived from the telluroesters.24 ArTeCOPh + Ar1C CCO2Me Ar = Ph, p -MeOC6H4, p -MeC6H4 Ar1 = Ph, p -ClC6H4
K2CO3 THF.H2O
Ar1 ArTe
H CO2Me (76 - 95%)
K2CO3 90% EtOH
Ar1 ArTe
H CO2Me
Otherwise, telluroacylation of terminal alkynes is achieved by treatment of alkynes with telluroesters in the presence of CuI and triethylamine.25 R H CuI Et3N, Me3NHCl ArTe COAr1 (64 -91%)
R
H + ArTeCOAr1
R = Ph
Ar = Ph, p -BrC6H4, p -ClC6H4, p -MeOC6H4; Ar1 = Ph Ar = Ar1 = p -ClC6H4
R = Ph, EtOCH2; Ar = p -ClC6H4; Ar1 = p -MeOC6H4
3.16
VINYLIC TELLURIDES AND DITELLURIDES
77
As a further development of the hydrotelluration of alkynes the addition of diisobutylaluminium tellurolate to terminal acetylene was investigated. Regiochemistry of the obtained product leading to 1,1-disubstituted ethylenes is contrary to that observed in the addition of sodium butyltellurolate to aryl acetylenes, which produces exclusively the Z isomer resulting from an anti addition.26
RTeTeR
DIBAL-H
RTeAl(i-Bu)2
Toluene/Hexane reflux
R1
R1C H
(45 - 75%) BuTe R = n -Bu R1 = alkyl, vinyl, aryl
General procedure for the synthesis of 1-(tellurobutyl)-1-(organyl)-ethenes.26 To a solution of dibutyl ditelluride (0.738 g, 2.0 mmol) in dry hexane (4.0 mL) contained in a two-neck, round-bottomed flask, diisobutylaluminum hydride (DIBAL-H) (4.0 mL, 4.0 mmol, sol. 1.0 M in toluene) was added and the mixture refluxed. The corresponding alkyne (12.0 mmol) was added at once to the resulting yellow solution and the reaction mixture refluxed for 4 h. After this time the reaction was cooled to 0°C, water was added (4.0 mL) and the product extracted with hexane (3⫻50 mL) and ethyl acetate (3⫻50 mL). The organic phases were dried over anhydrous MgSO4 and the solvents evaporated under reduced pressure. The alkyl tellurium compounds were removed by distillation using a Kügelrohr apparatus. The residue is the vinylic telluride which was purified by flash chromatography using hexane as eluent. Vinyltellurides with E configuration were obtained by the reaction of alkynes with DIBAL-H followed by the addition of an organotellurenyl bromide in the presence of dry LiCl.26
R
H
DIBAL-H
R
H
Toluene/Hexane reflux
H
Al(i-Bu)2
BuTeBr LiCl (50 - 60%)
R
H
H TeBu major product
R = alkyl, vinyl, aryl
General procedure for the synthesis of (E)-1-(tellurobutyl)-2-(organyl)ethenes. To a 25 mL, round-bottomed flask, containing a solution of the corresponding alkyne (4.0 mmol) in dry hexane (4.0 mL) at 0°C, DIBAL-H (4.0 mL, 4.0 mmol, 1.0 M in toluene) was added at once. The mixture was slowly warmed for 45 min and then refluxed for 3 h. The reaction was cooled to room temperature and dry hexane (8.0 mL) and dry toluene (8.0 mL) were added. Concurrently, the butyltellurenyl bromide was obtained by the addition of a solution of bromine (0.16 g, 2.0 mmol) in benzene (~10 mL) to the solution of dibutylditelluride (0.738 g, 2.0 mmol) in hexane cooled at 0°C under a nitrogen atmosphere. The mixture was stirred at 0°C for 10 min, then LiCl (0.196 g, 4.2 mmol) was added, the dark solution turned clear red and stirring was continued until LiCl was dissolved (10 min). The resulting solution was transferred to the flask containing the vinyl alane. The reaction was stirred for 2 h at room temperature and then a mixture of ice and water (~60 mL) was added. The solids were filtered and the products extracted with hexane (3⫻70 mL) and ethyl acetate
78
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
(2⫻70 mL). The organic layers were combined and after drying over anhydrous MgSO4, the solvents were removed under reduced pressure. To obtain analytically pure samples of the vinylic tellurides, the crude mixture was dissolved in 95% ethanol (20 mL) and NaBH4 (~0.18 g) was added. The resulting yellow solution was stirred for 10 min extracted with petroleum ether (2⫻70 mL), and washed with water (5⫻70 mL). After drying the organic phase over anhydrous MgSO4, the solvent was removed under reduced pressure and the residue distilled in a Kügelrohr apparatus to remove the alkyl tellurides. The residue is the vinylic telluride that was purified by column chromatography using hexane as eluent. The Z isomers were achieved by the addition of DIBAL-H to acetylenic tellurides. R
H
DIBAL-H Toluene/Hexane reflux
R = alkyl, vinyl, Ph
H
H
R
TeBu
+ (n -BuTe)2
(30 - 51%)
General procedure for the synthesis of (Z)-1-(tellurobutyl)-2-(organyl) ethenes. To a 25 mL, round-bottomed flask, containing a solution of the corresponding butyltelluro alkyne (2.0 mmol) in dry hexane (2.0 mL), DIBAL-H (2.0 mmol, 2.0 mL, sol. 1 M in toluene) was added at once. The reaction mixture was refluxed for 2 h, then cooled to room temperature and water added (2.0 mL). The product was extracted with hexane (3⫻50 mL) and ethyl acetate (2⫻50 mL). The organics were washed with water (3⫻50 mL), dried over anhydrous MgSO4 and the solvents evaporated. The product was purified by column chromatography using hexane as eluent for R⫽vinyl and Ph and as above for others. 3.16.1.3
From organyl tellurolate (and telluride) anions and vinyl bromides Br AlLiH4 R1 RTeLi RTeTeR (83 - 86%) THF/HMPA
TeR
(ref. 12)
R1
R = n -Bu, p -MeC6H4; R1 = Ph Br Na/HMPA 120°C, 1h R = R1 = Ph
RTeNa
TeR
R1 120°C, 2h (34%)
(ref. 27)
R1
The reactions of lithium n-butyl and p-methoxyphenyl tellurolate with trans--bromostyrene require, respectively, a 15 min and a 3 h reflux in THF, indicating a greater nucleophilicity of the aliphatic tellurolate towards the aromatic tellurolate. Vinylic tellurides (general procedure).12 A solution of the ditelluride (2.0 mmol) and trans-bromostyrene (0.73 g, 4.0 mmol) in THF/HMPA (10 mL) is added dropwise at room temperature and under N2 to AlLiH4 (0.17 g, 4.5 mmol) in THF (2 mL). The dark red colour of the ditelluride disappears at once. The resulting pale green solution is refluxed (R⫽n-Bu, 15 min; R⫽p-MeOC6H4, 3 h). After cooling to room temperature the reaction mixture is
3.16
VINYLIC TELLURIDES AND DITELLURIDES
79
treated with H2O (1.0 mL) and 10% NaOH (1.0 mL) and then extracted with ether. The extract is washed with brine, dried (MgSO4) and evaporated. The residue is purified by recrystallization or Kügelrohr distillation. Sodium telluride, obtained by heating elemental tellurium with sodium hydride in DMF, reacts similarly, leading to symmetrical divinylic tellurides28 (compare the similar reaction with aryl iodides, see Section 3.1.2.1).
Te
3.16.1.4
NaH DMF, 140°C
Br Na2Te Ph DMF /THF (41%)
Ph
Te
Ph
From vinylic tellurolate anions and alkyl halides
R
R1 MgBr
+ Te
THF reflux
R = H, Me, Ph; R1 = H R = H; R1 = Me R2 = n -Bu
R
R1
R2Br TeMgBr (73 - 79%)
R
R1 TeR2
(ref. 12, 29)
This reaction is an application of the general method for the preparation of unsymmetrical tellurides (see Section 3.1.3). Vinylic tellurides (general procedure).12 Elemental Te (0.6 g, 5.0 mmol) is added to a solution of the vinylic magnesium bromide (5.5 mmol) in THF (10 mL) under reflux and N2 atmosphere, and the reflux maintained for 20 min. The mixture is allowed to reach room temperature and then treated with n-butyl bromide (0.7 g, 5.0 mmol). After stirring for 10 min, the reaction mixture is cooled at 0°C, treated dropwise with saturated aqueous NH4Cl, extracted with ether, dried (MgSO4) and then evaporated. Kügelrohr distillation of the residue under vacuum gives the vinyl alkyl tellurides as yellow liquids. By treating the vinylic magnesium tellurolates with air while stirring, instead of with alkyl bromides, divinylic ditellurides are formed.23 R1 2R
1) air TeMgBr 2) H2O (51-68%)
R1 R1 R
R Te Te
R = Ph, Me, H; R1 = H R = H; R1 = Me
Divinylic ditellurides (general procedure).23 Elemental Te (12.7 g, 100 mmol) is added at once to a stirred solution of the vinylic magnesium bromide (0.11 mol) in THF (150 mL) under N2. The mixture is refluxed for 30 min with stirring, allowed to reach room temperature, then stirred for 1 h in the presence of air (by opening the apparatus). Deposition of some Te is observed during the oxidation process. The mixture is treated with brine.
80
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
The ditelluride is extracted with ether (3⫻50 mL), and the extract dried (MgSO4) and evaporated. The residue is purified by SiO2 flash chromatography. If the vinylic magnesium tellurolate is hydrolysed before the oxidation, a complex mixture of products is formed. The divinylic ditellurides, obtained as described, are converted into alkyl vinyl tellurides by reduction with AlLiH4 followed by alkylation.23 1 R1 R
R
Te Te
R
1) AlLiH4 /THF 2) R2X (82, 85%)
R1
R
TeR2
R = H; R1 = Me R = Me; R1 = H, R2 = n -Bu
Alkyl vinyl tellurides (general procedure).23 A solution of the divinylic ditelluride (1.0 mmol) in THF (6 mL) is added dropwise, at room temperature under N2, to AlLiH4 (0.09 g, 2.5 mmol) in THF (3 mL). The dark red colour of the ditelluride disappears. The resulting mixture is treated with butyl bromide (0.3 g, 2.2 mmol) and stirred for 15 min. Then H2O (0.5 mL), 10% aqueous NaOH (0.5 mL) and H2O (0.5 mL) are added in sequence. The product is extracted with ether (3⫻10 mL). The extract is washed with brine, dried (MgSO4) and evaporated, giving the product as a yellow oil. 3.16.1.5
From organotellurolate anions and activated vinylic halides
-Aryltelluro vinyl aldehydes and ketones have been prepared by treating -chlorovinyl carbonyl compounds or -acylvinyl triethyl ammonium chlorides with arene tellurolate anions.30
X
COR2
R1
R
R = H, alkyl R1 = H, Ph R2 = H, Ar
ArTe-(a or b or c) MeTe-(d)
Ar(Me)Te R1
COR2 R
X = Cl
X = N+Et3]Cl-
a) ArLi + Te /THF b) ArTeTeAr + Li /napht cat
c) ArTe)2 /NaBH4 /MeOH (70- 86%)
THF. (37-65%) R, R1 = (CH2)4 R2 = H
d) MeLi + Te /THF (54%)
Using TeLi2, bis(-acylvinyl) tellurides have been prepared by a similar protocol. 2
Cl
COR2 TeLi2
R1
R
R = R1 = H; R2 = Aryl R, R1 = (CH2)4; R2 = H
R
R1
R2OC
Te
COR2
R1 R (39 - 60%)
3.16
VINYLIC TELLURIDES AND DITELLURIDES
81
1-(4-Bromophenyl)-3-(4-ethoxyphenyltelluro)-2-propen-1-one (typical procedure).30 Powdered NaBH4 was added in small portion to a suspension of di(4-ethoxyphenyl) ditelluride (4.47 g, 0.009 mol) in methanol (30 mL) and stirred under argon until full decolouration of the solution. A solution of the ammonium salt (X⫽N+(Et3)Cl⫺; R⫽R1⫽H; R2⫽4-BrC6H4) (6.25 g, 0.018 mol) in methanol was added under stirring. Deposition of the telluride occurred, starting when ~2/3 of the ammonium salt solution was added. The reaction mixture was refluxed under stirring for 30 min, cooled at room temperature and filtered off. Water (100 mL) was added to the filtrate, and the telluride remaining in solution was extracted with benzene (3⫻25 mL). The solvent was removed in vaccum to give an additional amount of the product – total yield 7 g (85%). Yellow crystals (from benzene/hexane, 1:1), m.p. 143–144.5°C. Similar substitutions at activated vinylchlorides have been performed using aluminium tellurolates.31 O BuTeTeBu + Te
DIBAL-H
[BuTeAl(i -Bu)2]
R
Cl
R1 0°C to r.t.
O
TeBu R1
R
This protocol has been applied to the coupling of arene tellurolates with (E)-2-iodo-1alkenyl sulphones, enolphosphonates, tosilates and triflates of -dicarbonyl compounds. R
SO2pTol ArTeNa
I
H
R
SO2pTol
ArTe
(ref. 32)
H Br2
R = n-Bu, C5H11, C6H13, Ph
R
Ar = Ph, p -FC6H4
SO2pTol
ArHTe Br Br
H (57- 72%)
THF
n -BuTe
O
O n-BuLi + Te
n -BuTeLi +
X
R2 R1
R
0°C,1-20 min
(ref. 31)
R = Me, R1 = H; R2 = Me, OEt a) X = O-P(O)(OEt)2 (65 - 80%)
R = Ph; R1 = H; R2 = Me R, R1 = (CH2)4; R2 = OMe, R,
R1
= (CH2)3;
R2
R
R2 R1
Ph
= Me
b) X = OAc; c) OTs
R = R2 = Me; R1 = H
d) X = Tf (70 - 80%)
R = Me; R2 = OEt; R1 = H
General procedure for the substitution reactions between activated enols and lithium n-butyltellurolates.31 To a suspension of elemental tellurium (0.38 g, 3 mmol) in THF (4 mL) under nitrogen at 0°C was slowly added n-butyllithium (from a 1.4 M solution in hexane, 2.1 mL, 3 mmol). A clear yellow solution was formed. Then the appropriate enol
82
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
was added (2 mmol) and the mixture was stirred at 0°C monitoring by TLC, until the consumption of the enol. The reaction mixture was diluted with ethyl acetate (50 mL) and washed with brine (3⫻50 mL). The organic phase was dried with magnesium sulphate and the solvents were evaporated. The residue was purified by silica gel column chromatography eluting with hexane/ethyl acetate (9:1). Important remarks are that starting from mixtures of E/Z enol derivatives, only the (Z)-vinylic tellurides are obtained, and comparative experiments demonstrate that alkyl tellurolates (n-, s- and t-BuLi) react faster than the aromatic (PhMgBr, 2-ThLi), and that the reaction time is not influenced by the nature of the leaving group (phosphate, acetate, tosylate and triflate). 3.16.1.6 From organyl tellurolates and electrophilic acetylenes Organyl tellurolate anions effect 1,4-additions to acetylenes bearing electron-withdrawing groups such as acetylenic ketones,33 aldehydes, esters, diacetylenic ketones,33–36 as well as acetylenic phosphonates and sulphones32,37,38 giving 2-substituted vinyl tellurides with Z configuration.
R
COR1
ArTeNa /EtOH [(ArTe)2 /NaBH4] (68 - 88%)
ArTe R
O H
R1
R = H, n -Bu, Ph; R1 = Ph, H, OEt, OMe; Ar = Ph, p -MeOC6H4, p -MeC6H4 R = Ph; R1 = Ph
RTeTeR
NaBH4
EWG = P(O)(OEt)2
RTeNa
R = n-Bu,Ph
R1
R1
EWG
RTe
R1 = n -Bu, Ph , R1 = H, n -Bu, Ph
R = Ph, p -ClC6H4, R1 = Ph, C5H11 p -FC6H4, p - Tol
EWG Yield % 42- 69 (ref. 37) 72- 95 (ref. 38) 57 - 67 (ref. 32)
EWG = PhSO2 EWG = p-TolSO2
R, R1 = Ph, n -Bu R = Ph, p -FC6H4 R1 = H, Ph, n -C6H13
93 - 94 (ref. 38) 71 - 82 (ref. 32)
EWG = -CHO
R = n -Bu, Ph; R1 = H
80 - 84 (ref. 36)
Addition of aryl tellurolates to acetylenic ketones (general procedure).34 NaBH4 (0.55 g, 15 mmol) is added in small portions, under N2, to a solution of the diaryl ditelluride (5 mmol) in EtOH (20 mL) at room temperature. A solution of the acetylenic ketone (10 mmol) in EtOH (10 mL) is then added to the reaction mixture, with stirring. The resulting precipitate of the 2-carbonylvinyl telluride is filtered off and recrystallized from EtOH.
3.16
VINYLIC TELLURIDES AND DITELLURIDES
83
The obtained telluroacroleins have been submitted to a Wittig methylenation giving the expected tellurodienes.36 RTe
CHO Ph3P=CH2
RTe
By treating alkynes with diaryl ditellurides and sodium arylsulphonates in AcOH/H2O, an anti-tellurosulphonation takes place. Some of the obtained tellurosulphones have been converted into the corresponding dibromides. In the case of R⫽Me3Si a desilylate product is formed.32
R
H
ArTeTeAr/NaSO2Ar1 AcOH/H2O,80°C
ArTe
H
PhTeTePh/NaSO2p - Tol AcOH/H2O, 80°C
ArTe H Br Br (74 - 85%)
H
Me3Si
SO2p-Tol
PhTe
SO2Ar1
Ar
(51-70%)
R = n -Bu, C5H11, C6H13, Ph Ar = Ph, p -FC6H4 Ar1 = Ph, p -Tol, p -ClC6H4 Me3Si
SO2Ar1 Br2
R
SO2p - Tol
AcOH PhTe
H
26%
Anti-tellurosulphonation of 1-alkynes.32 A solution of alkyne (1.1 mmol), sodium arylsulphinate (5 mmol) and diorgano ditelluride (0.5 mmol) in 5 mL of 80% aqueous acetic acid was heated at 80°C for 24 h (R⫽Ph, 5.2 h). The reaction mixture was diluted with 20 mL of AcOEt, washed with saturated aqueous sodium bicarbonate, dried over Na2SO4 and concentrated in vacuum. Crude products, were concentrated under vacuum, and the residues were purified by preparative TLC on silica gel (AcOEt/hexanes, 1:10), treated with 1 equiv of Br2 in AcOEt and concentrated under vacuum. The residues were purified by recrystallization with CH3OH/HCCl3. 3.16.1.7
Tanden vicinal difunctionalization of alkynes
A tanden anti-vicinal difunctionalization of alkynes, involving the addition of a lithium organotellurolate to an activated alkyne, with subsequent trapping of the vinyllithium intermediate with electrophiles, was recently reported and named electrotelluration.39
R
EWG + R1TeLi
THF -20 to -30°C 5 - 20 min
R1Te
R = H, Me; EWG = CO2Me, SO2Ph, SOPh R1 = n -Bu, Ph E = PhCHO, C3H7CHO, Ph2CO 43 - 84% (Z main or only product) R = H; EWG = CO2Me2; R1 = n -Bu E = Me3SiCl 45% (E only product)
R
EWG Li
E+
R1Te R
EWG E
84
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
Employing alkinyl esters bearing an aldehyde group with different chain length, an intramolecular reaction occurs giving five- to eight-membered cyclic systems. OH O ( )n
O
RTeM O O
H n = 2- 5
O( )n
TeR (31 - 80%)
RTeM = PhTeLi, t -BuTeLi, PhTeMgBr,
3.16.1.8
TeMgBr
Telluroacylation of terminal alkynes
The treatment of terminal alkynes with telluroesters in DMF in the presence of CuI and triethylamine, followed by addition of trimethylamine hydrochloride, gives rise to (Z)-(-aryltelluro)-,-enones.40 H + ArTeCOAr1
R
CuI R Et3N, Me3NHCl ArTe
H
COAr1 64-91% Ar = Ph, p -BrC6H4, p -ClC6H4, p -MeOC6H4; Ar1 = Ph Ar = Ar1 = p -ClC6H4
R = Ph
R = EtOCH2; Ar = p -ClC6H4; Ar1 = p -MeOC6H4
3.16.2 Starting from electrophilic tellurium 3.16.2.1 By addition of tellurium tetrahalides and aryltellurium trihalides to acetylenes Tellurium tetrachloride and aryltellurium trichloride,41–44 as well as tellurium tetrabromide45 and aryltellurium tribromides45,46 add to acetylenes to produce, respectively, 2-halovinyl tellurium trihalides and dihalides, which can be submitted to further manipulations.
R X = Cl
R1
CCl4 (77-97%)
TeX4
R1
R Cl
TeCl3
R = Ph, CH2OH; R1 = H, alkyl, Ph
TeCl4 + H
AcOH
Ph
R = Ph; R1 = H
Cl
)2TeCl2 Ph
Na2S.9H2O
Ph
R = R1 = Ph
Cl
1) NaBH4
R
2) R2X R2 = alkyl
X = Br H
R
(70, 89%)
Br
2R
R NaBH4 Br Te Br Br
R = Ph, C5H11
TeR2
Cl
R Br
Te)2 R1
R Te
Br
Na2S.9H2O
Ph
H
Cl
)2Te
3.16
VINYLIC TELLURIDES AND DITELLURIDES
X = Cl Ar(R)TeX3 X = Br
R
R H benzene reflux (60-85%)
Te(Ar)Cl2
Cl
85
Cl
NaBH4 THF/H2O, r.t.
H
TeAr
R
H
OH ;
R = alkyl, CH2OH, aryl, Ar = p-MeOC6H4
R1
R1
H
Br
solvent (60-85%)
R1
NaBH4 TeAr(R) Br Br
H
Br
TeAr(R)
Ar, R = Ph, C5H11, HOCH2, CH3OCH2 R1 = Ph, p -tolyl, α -naphtyl, Bu
The addition of TeCl4, aryltellurium trichlorides and TeBr4 is stereoselective giving only Z adducts. The addition of aryltellurium tribromides exhibits Z or E configuration depending on the solvent, benzene or ethanol used in the reaction. 2-Chloro-2-phenylethenyl-1-p-methoxyphenyltellurium dichloride (typical procedure).43 p-Methoxyphenyltellurium trichloride (1.7 g, 5 mmol) is added to phenylacetylene (0.52 g, 5 mmol) in benzene (50 mL). The mixture is refluxed for 6 h and the reaction is monitored by TLC (elution with CHCl3). The mixture is washed with MeOH/H2O (1:1, 3⫻30 mL). The organic phase is dried (MgSO4) and the solvent evaporated in a rotary evaporator. The residual oil is filtered through a column of SiO2, eluting first with CCl4 and then with CHCl3/MeOH (9:1). The product is recrystallized from CHCl3/petroleum ether at 30–60°C (1.7 g (77%); m.p. 134–135°C). 2-Chloro-2-phenylethenyl-1-p-methoxyphenyl telluride (typical procedure).43 The dichloride from the preceding preparation (1.55 g, 3.5 mmol) in THF (30 mL) is treated dropwise with NaBH4 (0.14 g, 3.5 mmol) in H2O (17 mL). An immediate reaction occurs with gas evolution. After stirring for 15 min at room temperature the mixture is diluted with ether (30 mL) and washed in sequence with H2O, saturated aqueous NH4Cl and brine. The organic phase is dried (MgSO4), and evaporated in a rotary evaporator. The residual oil is filtered through a column of SiO2 (elution with petroleum ether at 30–60°C) (1.07 g, (84%)). In the case of 3-hydroxyalkynes the OH group promotes anti addition. Depending on the steric hindrance at the propargylic position, four- or five-membered cyclic tellurium oxychlorides are formed.47 ArTeCl3 + HO
O
ArTe Cl Cl ArTeCl3 +
Cl
Cl
HO
Te Cl Ar
Cl HO
HO ArTe Cl Cl
O Te Cl Ar
Cl
86
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
Addition reaction of p-methoxyphenyltellurium trichloride to 3-hydroxy alkynes.47 A solution of the 3-hydroxy alkyne (11 mmol) in dry benzene (10 mL) was added to a suspension of p-methoxyphenyltellurium trichloride (3.40 g, 10 mmol) in dry benzene (40 mL). The reaction mixture was refluxed for 8 h, during which the p-methoxyphenyltellurium trichloride was consumed, forming a clear yellow solution. The resulting solution was cooled to room temperature, diluted with ethyl acetate and washed with a saturated NH4Cl solution and brine. The solvent was evaporated under reduced pressure, and the residue was quickly chromatographed on SiO2, using CCl4 and CHCl3/MeOH (5:1) as eluents. The resulting oil was crystallized from CHCl3/hexane. A more recent report describes the regio- and stereoselective addition of aryltellurenyl iodides (prepared in situ from the corresponding ditellurides and iodine) to alkynes to afford the (E)-1-iodo-2-aryltelluro-1-alkenes, which treated with bromine give the corresponding dibromides.32
R
H
ArTeI ArTe)2 + I2 THF, 0°C
I Br2
R ArTe
H
R = n -Bu, C5H11, C6H13 Ar = Ph, p -ClC6H5
R
I
ArTe H Br Br (37-53%)
Anti-addition of ArTeI with 1-alkynes.32 A mixture of 1 mmol of ArTeI (prepared by the reaction of a diarylditelluride (0.5 mmol) with I2 (0.55 mmol) in THF at 0°C) and 1 mmol of an alkyne was stirred at room temperature for 12 h followed by the treatment with saturated Na2S2O3. After stirring for 30 min, the mixture was extracted with hexane, dried over CaCl2 and concentrated in vacuum. The residues were purified by preparative TLC on silica gel eluted with hexanes and then reacted with Br2 (1 equiv). 3.16.2.2
From organyltellurenyl halides and vinylic Grignard reagents R
THF R1 + R2 TeY (71-86%) MgX
R
R1 TeR2
R = R1 = H
R2 = Ph; Y =I (ref. 48) R2 = p -MeOC6H4, n -Bu; Y = Br (ref. 12)
R = Ph; R1 = H R = H; R1 = Me
R2 = p -MeOC6H4; Y = Br (ref. 12)
This reaction is an application of the general method for the preparation of unsymmetrical tellurides (see Section 3.1.3.5). The tellurenyl halide is prepared in situ by halogenolysis of the corresponding ditelluride.12 Vinylic tellurides (general procedure).12 A solution of the organotellurenyl bromide, prepared by adding Br2 (0.40 g, 2.5 mmol) in benzene (5.0 mL) to the corresponding ditelluride (2.5 mmol) in THF (10 mL) at 0°C under N2, is added dropwise to a solution of the Grignard reagent (7.0 mmol) in THF (10 mL) at 0°C under N2. A gradual disappearance of the red colour of the reaction mixture is observed. After stirring the mixture for 1 h at
3.16
VINYLIC TELLURIDES AND DITELLURIDES
87
0°C, the solvent is evaporated, and the residue is treated with saturated aqueous NH4Cl, extracted with ether, dried (MgSO4) and evaporated. The product is purified by SiO2 column chromatography (elution with benzene/hexane, 9:1). The obtained ethenylphenyltelluride can be deprotonated with strong hindered bases (LDCA) giving the lithium derivatives which react with electrophiles.48 TePh OH
1) PhCHO 2) H2O (88%) TePh H
Ph
TePh
LDCA THF
TePh
D2O
Li
D
3.16.2.3
Me3SiCl
TePh
(80%)
SiMe3
From vinyltellurenyl iodides and Grignard reagents
The following scheme is self-explanatory.12 RMgX +R1
THF R2 TeI 0°C -r.t., 1 h (64-71%)
R1
R2 TeR
R = p -MeOC6H4, n -Bu; R1 = R2 = H R = p -MeOC6H4; R1 = H; R2 = Me
3.16.3 Via radical reactions Diorganyl tellurides add to alkynes via a radical mechanism in the presence of a catalytic amount of a radical initiator such as AIBN or 2,2⬘-azobis(4-methoxy-2,4-dimethylvaleronitrile) (ln), as well as under irradiation by visible light (tungsten lamp), affording vinylic tellurides in a variable Z/E ratio.49 RTeR1 + R2
R3
AIBN (0.1 mmol) benzene(1 mL), reflux
R2
R3
RTe
R1
Telluride
Alkyne (percentage yield, (E) /(Z) ratio)
PhTePr-i
R3 = H; R2 = Ph (97,56 /44), Ac (99,19 /81), MeO2C (93,29/71) R2 = R3 = CO2Et (95, 37 /63)
PhTeBu-n n -BuTeBu-t
Ac H (73, 20 /80) R3 = H; R2 = Ac (84, 88 /12), n -hexyl (42, 80 /20) Me3Si (77, 0 /100), Ph (93, 100 /0a) R2,R3 = (CH2)6 (52) (E)
n -BuTeCH2Ph
Ph
aCatalyst
H (91, 56 /44)
= In; the adduct is also obtained by irradiation (tungsten lamp), 50°C, 3h, neat (84%, 100/0)
88
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
The examination of the structure of the formed products revealed that the fission of the telluride bonds occurs exclusively at C(sp3)–Te rather than C(sp2)–Te bonds, at tertiary C–Te rather than primary C–Te bonds, and at PhCH2–Te rather than n-Bu–Te bonds. The following scheme shows that (2-propargyloxyphenyl)acyltellurides and (2-propargyloxyalkyl)aryltellurides undergo an intramolecular version of the above radical addition, promoted respectively by photolysis (tungsten lamp) and irradiation in the presence of (Bu3Sn)2 or Bu3SnH/AIBN giving chromanone and furan vinyltelluro derivatives (see also Section 5.7). O
O hν, 8°C
TeAr O
(ref. 50, 51)
TeAr
(100%)
O
Ar = p -FC6H4 R1 TeAr
O R
R
(Bu3Sn)2 or Bu3SnH /AIBN hν, bz, reflux (40, 46%)
R1
TeAr (ref. 52) O
R, R1 = (CH2)4 R = H; R1 = CH2CH2CH=CH2, Et, Ph, CH2Oallyl, CH2OPh, CH2OBz Ar = p -FC6H4
Diphenyl ditelluride, on irradiation with visible light, effects the vic-phenyltelluration of acetylenes, giving the corresponding bis-phenyltelluroalkenes in good yields.53
R
R1 + PhTeTePh
hυ (68-90%)
a) R = n -hexyl, HOCH2, H2NCH2, Ph,
PhTe R
R1 TePh ; R1 = H
R1
b) R = Ph; = CHO R = R1 = CO2Et
With non-activated acetylenes (R–≡–R1 (a)) the best results are provided by irradiation with visible light (400 nm) at 40–70°C, giving exclusively the E isomers. On irradiation in the near-ultraviolet (300 nm), lower yields are obtained, probably because of the reverse reaction to the starting materials. The addition to activated acetylenes (R–≡–R1 (b)) proceeds even upon irradiation at 300 nm. In this case, the intermediate vinyl radical is stabilized by the carbonyl, vinyl or aryl groups, and the reverse reaction to the starting materials is suppressed. . R
R1 TePh
3.16
VINYLIC TELLURIDES AND DITELLURIDES
89
(E)-1,2-bis(phenyltelluro)-3-hydroxyprop-1-ene (typical procedure).53 A mixture of propargyl alcohol (0.14 g, 0.25 mmol) and diphenyl ditelluride (1.02 g, 0.25 mmol), in a Pyrex glass tube sealed under reduced pressure (after filling with argon), is irradiated at 70°C for 24 h through a filter (400 nm) with a tungsten lamp (500 nm) situated ~20 cm from the tube. The mixture is purified by preparative TLC on SiO2 (elution with hexane), giving the pure product (0.90 g (78%)).
3.16.4 Reduction of acetylenic tellurides The reduction of acetylenic tellurides to the vinylic ones is achieved by treatment with NaBH4 in EtOH.54 The formal unusual reduction of the carbon triple bond by NaBH4 can be rationalized involving the attack of a hydride ion to the tellurium atom producing a tellurol and an acetylenic anion followed by the addition of the tellurolate anion to the acetylene, DIBAL-H has later been employed as a reducing agent.26
Ph
TeR
NaBH4 EtOH, refl., N2
R = n -Bu, C12H25
Ph
C- + RTeH-
Ph
CH + RTePh
-
DIBAL-H toluene/hexane reflux, N2 R = alkyl, vinyl, Ph
R
TeBu
EtOH (80-93%)
Ph
TeR
H
H
R
TeBu
TeR H
R
TeBu
H
Al(i-Bu)2
H2O
H H (30-51%)
Preparation of vinylic tellurides by the reaction of phenyl(alkyltelluro)acetylenes with NaBH4 under reflux.54 NaBH4 (0.093 g, 2.5 mmol) in EtOH (3.0 mL) is added to a solution of the phenyl(alkyltelluro)acetylene (2.0 mmol) in EtOH (10 mL) under N2. The solution is stirred under reflux for 3 h (the colour turns a pale yellow). Heating is stopped, and the pale yellow solution is treated with H2O (0.5 mL) and 10% NaOH (0.5 mL) and diluted with ether (30 mL). The mixture is washed with brine, the organic layer is dried (MgSO4) and the solvent is evaporated. The residue was chromatographed on SiO2 (eluting with hexane) to give the vinylic telluride. 3.16.5 Vinylic tellurides via olefination reactions 3.16.5.1
Horner-Emmons route
-Phenyltelluro phosphonates, prepared from the electrophilic or nucleophilic reagents RTeI and RTeLi, undergo subsequent treatment with base and aldehydes to provide vinylic telluride with E configuration.55 Ketene telluroketals have been prepared by a
90
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
similar olefination by one-pot, or by a step-by-step procedure.56 Ketones are almost unreactive.
(EtO)2P(O)CH2R R = H, Me, Ph R1 = Ph
1) LDA/THF, -78°C 2)R1TeI (65-90%) (EtO)2P(O)CH(R)TeR1 (EtO)2P(O)CH(R)I
R1TeLi R1Li + Te (51-77%) R=H R1 = n -Bu, Ph, Me3SiCH2, BuC C-
R2 1) NaH/THF, r.t. 2CHO/THF, refl. 2) R H R = H; R1 = Ph R2 = vinyl, aril
H TePh
Preparation of vinyl tellurides.55 To a mixture of NaH (1 mmol) (80% suspension in oil) and (phenyltelluromethyl)-phosphonate (1 mmol) in THF (5 mL) at reflux under N2, aldehydes (1 mmol) were added dropwise. Following 3 h at reflux, the solution was cooled to room temperature. Then, saturated aqueous NH4Cl was added and the mixture was extracted with diethyl ether. The organic extract was dried (MgSO4) and evaporated to give vinyl tellurides, which were purified by column chromatography on silica gel with ethyl acetate/hexane (1:20) or by preparative TLC.
(EtO)2P(O)CH3 1) LDA 2) PhTeBr (EtO)2P(O)CH2TePh R=H
1) 3.1 LDA
R
TePh
2) 2PhTeBr 3) RR1CO
R1
TePh
1) 3.1 LDA 2) PhTeBr
(EtO)2P(O)C(TePh)2
RR1CO
(41-94%)
R1 = alkyl, vinyl, aryl
1,1-Bis(phenyltelluro)-1-pentene (typical procedure).56 To a solution of LDA (3.1 mmol) in THF (4 mL) cooled to ⫺78°C, under nitrogen, was added a solution of (phenyltelluromethyl)phosphonate (0.71 g, 2 mmol) in THF (1 mL) dropwise. The reaction was warmed up to 0°C and stirred 30 min at 0°C, then cooled to ⫺78°C and the PhTeBr (1 mmol) in THF (2 mL) was added. The temperature was again raised to 0°C for 30 min, butyraldehyde (1 mmol) was then added and the reaction mixture stirred at room temperature for 2 h. Usual work-up and column chromatography (SiO2, hexane) gave 0.45 g (94%). -Thiovinyl tellurides (telluro(thio)ketene acetals and -cyanovinyl(telluro acrylonitriles)) have been synthesized via Horner reaction, by treating respectively thiomethyl or cyanomethyl diethylphosphonates (easily accessible via Arbusov reaction of triethylphosphonate with chloromethyl sulphides or chloromethyl acrylonitrile) with LDA, organotellurenyl bromides and aldehydes.
3.16
VINYLIC TELLURIDES AND DITELLURIDES
91
These olefination reactions are not stereoselective, giving mixtures of Z and E isomers.57,58 O (EtO)2 P
X
LDA THF, -78°C
O (EtO)2P
X
R1TeBr
LDA
Li
R2CHO X 1 0°C to r.t. TeR
R2HC
X TeR1
Li O (EtO)2 P
O (EtO)2P
X TeR1
(X = SR, CN)
X = SMe, SPh
45-75% yields R1 = H 38% R1 = Ph, n -Bu 2 R = Ph, p -Tol, p -ClC6H4, 2-Furyl, n -C3H7, i -C3H7 X = CN 78-93% R1 = Ph; R2 = n -C3H7, i -C3H7 yields R2 = H 23%
General procedure for the synthesis of ketene (S,Te) acetals.57 To a solution of LDA (3.1 mmol) in THF (4 mL) cooled to ⫺78°C, under nitrogen, was added dropwise a solution of thiomethylphosphonate (2 mmol) in THF (1 mL). The reaction was stirred at this temperature for 30 min after which PhTeBr (1 mmol) in THF (2 mL) was added. At the beginning the tellurium consumption was fast but by the end of the addition a slightly red solution remained, which became yellow in ca. 20 min. The temperature was raised to 0°C for 30 min, the aldehyde (1 mmol) was then added and the reaction mixture stirred for 1 h at 0°C and for 30–90 min at room temperature. The reaction was treated with water and extracted with ethyl acetate (3⫻25 mL). The organic layer was dried over MgSO4 and the solvent removed under vacuum. The residue was purified by column chromatography and eluted with hexane, yielding the product (mixture of isomers). General procedure for the synthesis of -phenyltelluro acrylonitriles.58 A solution of cyanomethylphosphonate (0.177 g, 1 mmol), THF(1 mL) was added dropwise to a solution of LDA (2.1 mmol) in THF (3 mL) at ⫺78°C under nitrogen. The reaction was stirred at this temperature for 20 min, then a solution of C6H5TeBr (2 mmol) in THF (2 mL) was added at 78°C. The temperature was raised to 0°C for 30 min, the aldehyde (1 mmol) was then added and the stirring continued for 30 min at 0°C and for an additional 30–90 min at room temperature. The reaction mixture was treated with water and extracted with ethyl acetate (3⫻25 mL). The organic layer was dried over MgSO4 and the solvent removed in vacuo. The residue was purified by column chromatography (SiO2) using hexane/ethyl acetate (99:1) as eluent. 3.16.5.2
Wittig route
Tellurophosphoranes, obtained through a transylidation reaction between tellurenyl halides and phosphoranes, react with aldehydes to give the expected vinylic tellurides as an E/Z isomeric mixture (method a). One other methodology involves the treatment of equimolar amounts of phenyl tellurenyl bromide and phosphonium salts with t-BuOK followed by an aldehyde (method b). Under these lithium-salt-free conditions, (Z)-vinylic tellurides are the main products.59
92
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
Method a
2(Ph3P+CH2R)lR=H
n -BuLi THF, r.t.
2Ph3P=CHR
R1 = i -Pr, Ar
PhTeBr THF, -78°C -(Ph3P+CH2R)Br-
Ph3P=CRTePh
R1CHO THF, r.t. -Ph3PO (30-76%)
R
R1 TePh E+Z
Method b 1/2 PhTeTePh
1/2 Br2 solvent
[PhTeBr]
Ph3P+CH2R]X-
R = H, Me X = Br, I R1 = i -Pr, aryl
THF, r.t.
t- BuOK [Ph3P+CH(R)TePh]Xr.t. t -BuOK 1 R CHO 1 R CH = C(R)TePh Ph3P=C(R)TePh THF, r.t. E:Z 7-48% 1:7 to 8.5
[Ph3P+CH2R]PhTe-XBr
Method a. (-Styryl) phenyl telluride.59 To a solution of methyltriphenylphosphonium iodide (0.405 g, 1 mmol) in dry THF (4 mL) at room temperature was added dropwise n-BuLi (2 mmol). After stirring at room temperature for 20 min the solution was cooled to ⫺78°C and a solution of PhTeBr (0.28 g, 1 mmol in 2 mL THF) was added, followed by benzaldehyde (0.16 g, 1.5 mmol). The temperature was raised to room temperature and stirred for 3 h. The solvent was removed under vacuum and the residue incorporated on SiO2 and purified by flash column chromatography (SiO2/hexane) giving an oil. Yield: 0.185 g (60%). E/Z⫽2. Method b. (2-Furylvinyl) phenyl tellurides. To methyltriphenylphosphonium iodide (0.405 g, 1 mmol) dissolved in dry THF (4 mL) was added a solution of PhTeBr (0.28 g, 1 mmol in 2 mL THF) and after 15 min stirring was added t-BuOK (0.25 g, 2.2 mmol). The mixture was stirred for 20 min and 2-furaldehyde (0.14 g, 1.5 mmol) was added. After stirring again at room temperature for 3 h, work-up and purification as above gave an oil. Yield: 0.143 g (48%), Z/E⫽8:1. Symmetrical divinyl tellurides VI have been prepared via a ylidation reaction involving the treatment of bis-phosphonium halotellurate I with excess base and then with aldehydes in THF at ⫺78°C (method c).60 Method c TeCl4 + 2Ph3P+CH3]I-
2Ph3P+CH3]2Te Cl4I2 LICA excess I
[Ph3P=CHTe(Cl2)CH=PPh3] III X = Cl, I
[Ph3P+CH2Te(Cl2)CH2P+Ph3]X2II
1/2 Ph3P=CH-Te-CH=PPh3 + Ph3P-CH(X)-Te(Cl2)-CH=PPh3 IV V RCHO 1/2 RCH=CH-Te-CH=CHR VI
The disproportionation of III into IV and V can be rationalized on the basis of the known reaction of phosphoranes with halogen sources giving -haloalkyl-phosphonium salts.61
3.16
VINYLIC TELLURIDES AND DITELLURIDES
93
In an alternative methodology, the bis-tellurophosphorane IV is prepared in situ by means of a transylidation reaction between II and excess of methylene triphenyl phosphorane (generated from the corresponding phosphonium salt and n-BuLi) (method d).60 Method d Ph3P+CH3]I-
n -BuLi
Ph3P=CH2
Ph3P=CH-Te(Cl2)-CH=PPh3 III R = Ph, p -MeC6H4, p -ClC6H4, 2-furyl
TeCl4
2Ph3P=CH2 Ph3P+-CH2-Te(Cl2)-CH2-P+Ph3]Cl2+ -2Ph 3P -CH3]Cl II
1/2Ph3P=CH-Te-CH=PPh3 + 1/2 Ph3P-CH(X)-Te(Cl2)CH=PPh3 IV V RCHO 1/2 RCH=CH-Te-CH=CHR VI
Method c.60 To a solution of tellurophosphonium salt Ph3P+Me]2Te2-Cl4I2 (0.539 g, 0.5 mmol) in dry THF (5 mL) at ⫺78°C under nitrogen, a solution of lithium dicyclohexylamide (LICA) (3 mmol) in THF (3 mL) was added dropwise. After 3 h of stirring at this temperature, benzaldehyde (0.159 g, 1.5 mmol) was added. The temperature was raised to room temperature, the mixture was stirred for 2 h and then treated with water and extracted with ethyl acetate (3⫻25 mL). The organic layer was dried over MgSO4 and the solvent removed under vacuum. The residue was purified by column chromatography over silica gel, eluting with hexane, to afford the bis-(2-phenylethenyl) telluride (mixture of isomers). Yield: 0.073 g, 44%. Method d. To a solution of methyltriphenylphosphonium iodide (2.43 g, 6 mmol) in dry THF (25 mL) under nitrogen, at room temperature, n-BuLi (6 mmol) was added dropwise. After stirring at room temperature for 20 min the solution was cooled to ⫺78°C and a solution of TeCl4 (0.270 g, 1 mmol) in dry THF (10 mL) was added. The mixture was stirred for 20 min and isobutyraldehyde (0.216 g, 3 mmol) was added. The temperature was raised to room temperature, the mixture was stirred for 3 h and then treated with water and extracted with ethyl acetate (3⫻25 mL). The organic layer was dried over MgSO4 and the solvent removed under vacuum. The residue was purified by column chromatography over silica gel, eluting with hexane, to afford the divinyl telluride (mixture of isomers). The reaction with aromatic aldehydes (R⫽Ph, p-Tol, p-ClC6H4, 2-furyl) is not strongly stereoselective, the E geometry being preferred. In the presence of HMPA (30%) the Z isomers become predominant. In the case of aliphatic aldehydes (R⫽i-C3H7, C3H7) the Z geometry is preferred in both solvent systems. The yields are in the same medium range for both systems (15–48%). Considering that the described reaction is feasible for both aromatic and aliphatic aldehydes, that the experimental procedure is very easy, that the yields, in spite of moderate, are not far from the theoretical, the described method is certainly a useful contribution for the synthesis of symmetrical divinyl tellurides. 3.16.6 Vinylic tellurides via borane chemistry Internal vinyl tellurides, which are not accessible via hydrotelluration of alkynes, have been prepared from alkynes through a vinyl borane route.
94
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
The sequential treatment of 1-alkynes with n-BuLi, trialkyl borane and a tellurenyl bromide reaches the (Z)-borosubstituted vinyl telluride which is easily hydrolyzed to the disubstituted vinyl tellurides. The reaction proceeds with high regio- and stereocontrol.62 R
H
R
1) n -BuLi, THF, -20°C 2) 3)
BR13, 0°C R2TeBr
R2Te
R1 BR12
AcOH r.t.
R1
R R1Te
H (52, 72%)
R = R2 = n -Bu R = n-C5H11; R2 = Ph R1 = Et
It was observed that the obtained telluroborane fails to react under the Suzuki coupling (PhI/Pd(PPh3)4/Na3PO4/DMF) to give trisubstituted vinyl tellurides. Acetylenic tellurides can also be submitted to hydroboration reactions. R
TePh
R = n -C5H11
1) c -Hex)2BH
R
TePh
2) PhI, Pd(PPh3)4 NaOH, THF
H
Ph
+
R Ph
TePh
+
H
R
Ph
H
TePh
60 : 14 : 26 (25%)
An additional protocol involves the reaction of vinyl boranes with diorganyl ditellurides.63 R
H
1) c -Hex)2BH
R
THF, -10 to 0°C
H
R = Ph, MeOCH2, MeCH2OCH2 R1 = Ph, p -Tol, n -Bu
R1TeTeR1 Pd(PPh 3)4 cat. B(c -hex)2
H
R
H
H
TeR1
(59-68%)
Vinylic tellurides from vinylboranes.63 To a solution of cyclohexene (10 mmol) in THF (10 mL) was added a solution of diborane (5 mmol) in THF at 0°C with stirring; the precipitate thus formed [(c-Hex)2BH] was stirred at 0°C for 1 h. The reaction mixture was diluted with a solution of a terminal acetylene (5 mmol) added at ⫺10°C, and the mixture was kept at 0°C for 2 h. After the precipitate had dissolved, the resulting solution was treated with 3 M NaOH (2 mL), diorgano ditelluride (4 mmol) and 3% Pd(PPh3)4, then was refluxed for 3 h under N2. After the reaction was complete normal work-up was performed. Vinyltellurides were isolated and purified by TLC with petroleum ether (30–60°C) as developer.
3.16.7 Telluro(seleno)ketene acetals, 1-seleno-2-telluro-ethenes, telluro ketene acetals, telluro(stannyl)ketene acetals and telluro(thio) ketene acetals Vinylic tellurides linking another chalcogeno group at the - or -position deserve special synthetic interest since the tellurium moiety can be removed selectively by means of several methods, furnishing new reactive vinylic intermediates.
3.16
VINYLIC TELLURIDES AND DITELLURIDES
95
The easily available 1-bromo-1-seleno alkene, by treatment with sodium phenyl tellurolate under bis(bipyridine)nickel (II) bromide catalysis, furnishes the corresponding telluro(seleno)ketene acetal.64 Ph H
SeMe PhTeNa, EtOH (bipy)2NiBr Br reflux
Ph
SeMe TePh (80%)
The same ketene acetal, as well as telluro(thio)ketene acetals has been obtained with retention of configuration by subsequent treatment of (E)-1-bromo-1-seleno(or thio) alkenes with n-BuLi and diphenyl ditelluride, resulting from the preferential Br/Li exchange over chalcogeno exchange.65
R
YR1
H
Br
n -BuLi hexane, 0°C
R
YR1
H
Li
R
SePh
H
TePh (63%)
(YR1 = PhSe)
PhTeTePh
R R = Ph, C5H11
SPh
H TePh (51, 63%) YR1 = MeS
Telluro(seleno or thio)ketene acetals (typical procedure).65 n-Butyllithium (1.6 M hexane solution, 1.5 mmol) was added to a hexane (5.0 mL) solution of -bromo-vinylic chalcogenide (1.0 mmol) at room temperature. After stirring for 5 min, the electrophile (1.5 mmol) was added at 0°C and the mixture was stirred at room temperature for 8 h (for products with R⫽n-C5H11, Ph; YR1⫽SMe), the solution was allowed to react at 65°C) and treated with saturated NH4Cl solution (5 mL) extracted with hexane and the organic layer washed with brine and dried over MgSO4. The solvents were evaporated and the residue was purified by flash silica gel chromatography eluting with hexane to give the product. Telluro(seleno)ketene acetals have been synthesized by the Al/Te exchange reaction, as shown in the following scheme, starting from hydroalumination of acetylenic selenides.66 R
SePh
Ph DIBAL-H toluene/hexane H N2 /reflux
SePh
BuTeBr Al(i -Bu)2 LiCl
Ph
SePh
H TeBu (22-50%)
+
Ph H
SePh H
R = C3H7, C4H9, C6H13, C7H15, C10H21, Ph,
The reaction furnishes low yield (owing to the low Al/Te exchange in the Al vinyl intermediate and the formation of (Z)-vinyl selenides as by-products) leading therefore to introduce a valuable alternative based on a hydrozirconation protocol. The following scheme illustrates the different regio- and stereochemical outcomes of the sequential addition of the Schwartz reagent (Cp2Zr(H)Cl) and butyl tellurenyl bromide to acetylenic selenides.67
96
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
With R⫽H or Ph unique products are formed with opposite regiochemistry, whereas alkylselenoalkynes (R⫽alkyl) give rise to a mixture of regioisomers. All the acetylenic selenides require 2 equiv of the Zr reagent to ensure the total conversion of the starting material. SeR1 n -BuTeBr
H R
SeR1
Cp2Zr(H)Cl R = H
R1 = n -Bu, Ph
ClCp2Zr
R = Ph R1 = n -Bu Ph
ZrCp2Cl
R
SeBu-n
H
ZrCp2Cl
R
+
ClCp2Zr
Ph
SeBu-n
H
TeBu-n (63%)
SeR1 H
n -BuTeBr SeBu-n
R H
A
SeR1
R
+
SeR1
H n -BuTe (81,66%)
SeBu-n n -BuTeBr
H R = alkyl R1 = n -Bu
H
H
H TeBu-n n -BuTe B (63-70%)
Ratio R = C3H7 n -Bu C6H13 CH3OCH2
A:B 70:30 90:10 92:8 64:36
General procedure for the synthesis of telluroseleno ethenes from acetylenic selenides. 67 To a mixture of Cp2Zr(H)Cl (0.51 g, 2.0 mmol) in THF (6.0 mL) under nitrogen, a solution of the corresponding butylselenoacetylene (1.0 mmol) in THF (2.0 mL) was added via syringe. The reaction was stirred at room temperature until the total transformation of the starting material was confirmed following the reaction by TLC on SiO2 using hexane as eluent. Then the resulting clear yellow solution formed was cooled at 0°C and a solution of butyltellurenyl bromide (2.0 mmol) prepared separately adding bromine (0.16 g, 1.0 mmol) in benzene (10 mL) to dibutylditelluride (0.36 g, 1.0 mmol) in THF (10 mL) was transferred via syringe. The stirring was continued for an additional 15 min, the mixture transferred to an Erlenmeyer flask, diluted with ethyl acetate (10 mL), 95% ethanol (5 mL) and water (10 mL). Butylbromide (0.32 mL; 3.0 mmol) and finally NaBH4 (0.09 g, 3.0 mmol) were added to transform the dibutylditelluride (formed from the excess of butylbromide used) to the corresponding telluride which is more easily removed by distillation. After this treatment the product was extracted with ethyl acetate (5⫻20 mL) and washed with water (5⫻20 mL), the organic phase was dried over anhydrous MgSO4 and the solvent evaporated under reduced pressure. The dibutyltelluride was removed by distillation of the crude product using a Kügelrohr apparatus. The residue is constituted by the telluroseleno ethenes which were obtained as yellow liquids after purification by flash chromatography using hexane as eluent in all cases. In a further line of experiments lithium alkynyl selenolate, instead of acetylenic selenides, has been used to generate the zirconated vinylselenides, precursors of (E)telluro(seleno)ketene acetals.68 RC CH
1) n -BuLi 2) Se
n -BuBr
RC CSeLi
R
SeBu-n
H
ZrCp2Cl
R = C3H7, C4H9, C6H13, Ph,
Cp2Zr(H)Cl
n -BuTeBr
R
R
SeLi
H
ZrCp2Cl SeBu-n
H TeBu-n (71-82%)
3.16
VINYLIC TELLURIDES AND DITELLURIDES
97
The stereochemistry of the obtained acetals was confirmed by nuclear overhauser enhancement spectroscopy (NOESY) measurement in 1H NMR spectra. Synthesis of telluro(seleno) ketene cetals. General procedure for the acetals via alkynylselenolate anions.68 To a solution of the freshly distilled terminal alkyne (1.0 mmol) in THF (5.0 mL) under a nitrogen atmosphere was added n-butyllithium (1.0 mmol, 0.5 mL, 2.0 M in hexane) at 0°C, and the solution was stirred for 15 min. The mixture was allowed to reach room temperature, and elemental selenium (0.079 g, 1.0 mmol) was added. After total dissappearance of selenium, the solid Cp2Zr(H)Cl (0.257 g, 1.0 mmol) was added rapidly. The resulting mixture was stirred, butyl bromide (0.21 mL, 2.0 mmol) was added, and the reaction was stirred at room temperature for an additional 1 h. Then, a solution of butyltellurenyl bromide (1.0 mmol) prepared separately as described previously was transferred with a syringe. The stirring was continued for an additional 30 min, and the mixture was transferred to an Erlenmeyer flask and diluted with ethyl acetate (10 mL), 95% ethanol (15 mL) and water (100 mL). Butyl bromide (1 mL) and finally NaBH4 (until the solution turned pale yellow) were added. After this treatment, the product was extracted with ethyl acetate and washed with water, the organic phase was dried over anhydrous MgSO4 and the solvent was evaporated under vacuum. Dibutyl telluride was removed by distillation of the crude product using a Kügelrohr apparatus. The residue contained the ketene telluro(seleno) acetals, which were obtained as yellow liquids after purification by flash chromatography using hexane as the eluent. The above-described procedure is advantageous towards the precedent method since: (a) the starting lithium alkynyl selenolate is prepared in situ, avoiding the laborious preparation of the acetylenic selenides; and (b) the hydrozirconation step is regio- and stereoselective, in contrast with the previously discussed hydrozirconation of acetylenic selenides resulting in a mixture of the regioisomers, and requires only 1 equiv of the Schwartz reagent instead of 2 equiv of the precedent procedure. The alkyne hydrozirconation protocol was also applied to acetylenic tellurides furnishing the zirconated vinyl tellurides in cis fashion and high regioselectivity. Subsequent treatment with tellurenyl halides affords telluro ketene acetals with total retention of configuration.68 The use of 2 equiv of the reagent is required (like the selenium route) to achieve the complete conversion of the reagents, in contrast with previous reports, where only 1.1 equiv of the reagent was used.69 The reactions of acetylenic tellurides are faster than the reaction of the selenium acetylides as assessed in separate comparable experiments.
R
TeR1
Cp2Zr(H)Cl
R
TeR1
H
ZrCp2Cl
R = H, C3H7, C6H13, CH3OCH2-, Ph, R1 = R2 = n -Bu X = Br
R2TeX
R
TeR1
H
TeR2
70-79% (2 equiv of Cp2Zr(H)Cl)
R1 = n -Bu, BnO(CH2)3; R2 = n -Bu, Ph 57-60% (1 equiv of Cp Zr(H)Cl) 2 X = Br, I
98
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
General procedure for the synthesis of bis(butyltelluro)ketene acetals.67 To a mixture of Cp2Zr(H)Cl (0.51 g, 2.0 mmol) in THF (6.0 mL) under nitrogen, a solution of the corresponding butyltelluroacetylene (1.0 mmol) in THF (2.0 mL) was added via syringe. The reaction was stirred at room temperature. The total transformation of the starting material was confirmed following the reaction by TLC on SiO2 using hexane as eluent. Then the resulting dark red solution formed was cooled at 0°C and a solution of butyltellurenyl bromide (2.0 mmol) prepared separately as described previously was transferred via syringe. The stirring was continued for an additional 15 min, the mixture transferred to an Erlenmeyer flask, diluted with ethyl acetate (10 mL), 95% ethanol (5 mL) and water (10 mL). Butylbromide (0.32 mL, 3.0 mmol) and finally NaBH4 (0.09 g, 3.0 mmol) were added. After this treatment, the product was extracted with ethyl acetate (5⫻20 mL) and washed with water (5⫻20 mL), the organic phase was dried over anhydrous MgSO4 and the solvent evaporated under reduced pressure. The dibutyltelluride was removed by distillation of the crude product using a Kügelrohr apparatus (100°C/0.6 mmHg). The residue is constituted by the bis(telluroketene) acetals which were obtained as yellow liquids after purification by flash chromatography using hexane as eluent in all cases. General procedure with 1.1 equiv of the reagent. A slurry was prepared from Cp2Zr(H)Cl69 (1.1 mmol) and 5 mL of THF at room temperature under a nitrogen atmosphere, and the acetylenic telluride (1 mmol) in 2 mL of THF was added via a syringe. The mixture was stirred at room temperature for 10–25 min, until hydrozirconation was complete, as evidenced by the disappearance of the insoluble hydride and the formation of a clear solution. To this solution was added 1.1 equiv of alkyltellurenyl iodide (prepared in situ by the addition of iodine solution to a stirred solution of dialkyl ditelluride), at room temperature. After stirring for 1 h, normal work-up was performed. Ketene telluroacetal was isolated and purified by column chromatography using hexane as eluent. The -zirconated vinyl tellurides are valuable intermediates for several synthetic manipulations.67 n -BuSeBr R
TeBu-n
H
SeBu-n
b
R
SeBu-n
H
TeBu-n R = C3H7, C4H9, C6H13, MeOCH2, Ph,
(61-69%)
R
TeBu-n
H
ZrCp2Cl
c I2 c
R
TeBu-n
H
I
d
+
R
I
H
TeBu-n
(73-81%)
NBS
a H O 2
R
TeBu-n
H
Br
R1COCl R
+
TeBu-n
H H (80-92%) R = C3H7, C4H9, C6H13, MeOCH2, Ph,
+
R
H (80, 77%)
R
TeBu-n
H
R1 O (51-71%)
Br
R = C3H7, C6H13
TeBu-n
R1 = Et, pr, Ph, OPh
3.16
VINYLIC TELLURIDES AND DITELLURIDES
99
Treatment with water gives the corresponding Z tellurides. Reaction with BuSeBr, iodine and N-bromosuccinimide (NBS) gives respectively Te–Se ketene acetals, -iodo- and -bromo vinyl tellurides as mixtures of Z and E stereoisomers (in contrast with the total retention of configuration of the above-discussed Zr/Te exchange reactions). The acylation was effected with acylchlorides in the presence of CuI.70 General procedure for the synthesis of (Z)-vinyltellurides from acetylenic tellurides (a).67 To a mixture of Cp2Zr(H)Cl (0.51 g, 2.0 mmol) in THF (6.0 mL) under nitrogen, a solution of the corresponding acetylenic telluride (1.0 mmol) in THF (2.0 mL) was added via syringe. The reaction was stirred at room temperature. The total transformation of the starting material was confirmed following the reaction by TLC on SiO2 using hexane as eluent. Then, the reaction mixture was treated with water (2.0 mL), diluted with ethyl acetate (150 mL) and washed with a saturated solution of ammonium chloride (3⫻50 mL). The organic phase was dried over anhydrous MgSO4 and the solvent evaporated under reduced pressure. After purification by flash chromatography using hexane as eluent, the products were obtained as yellow oils in 80–92% yield. General procedure for the synthesis of telluroseleno ketene acetals from acetylenic telurides (b).67 To a mixture of Cp2Zr(H)Cl (0.51 g, 2.0 mmol) in THF (6.0 mL) under nitrogen, a solution of the corresponding butyltelluroacetylene (1.0 mmol) in THF (2.0 mL) was added via syringe. The reaction was stirred at room temperature. The total transformation of the starting material was confirmed following the reaction by TLC on SiO2 using hexane as eluent. Then the resulting dark red solution formed was cooled at 0°C and a solution of butylselenenyl bromide (2.0 mmol) prepared separately was transferred via syringe. The stirring was continued for an additional 15 min, the mixture transferred to an Erlenmeyer flask, diluted with ethyl acetate (10 mL), 95% ethanol (5 mL) and water (10 mL). Butylbromide (0.32 mL, 3.0 mmol) and finally NaBH4 (0.09 g, 3.0 mmol) were added to transform the dibutyldiselenide to the corresponding selenide which is more easily removed by distillation. After this treatment the product was extracted with ethyl acetate (5⫻20 mL) and washed with water (5⫻20 mL), the organic phase was dried over anhydrous MgSO4 and the solvent evaporated under vacuum. The dibutylselenide was removed by distillation of the crude product using a Kügelrohr apparatus (70°C/0.6 mmHg). The residue is constituted by the ketene telluro(seleno) acetals which were obtained as yellow liquids after purification by flash chromatography using hexane as eluent. General procedure for the synthesis of 1-halo-1-telluro ethenes from acetylenic telurides (c).67 To a mixture of Cp2Zr(H)Cl (0.51 g, 2.0 mmol) in THF (6.0 mL) under nitrogen, a solution of the corresponding butyltelluroacetylene (1.0 mmol) in THF (3 mL) was added via syringe. The reaction was stirred at room temperature (10–30 min). The total transformation of the starting material was confirmed following the reaction by TLC on SiO2 using hexane as eluent. Then, the resulting dark red mixture formed was treated at room temperature with a solution of iodine or NBS (3.0 mmol) in THF (5.0 mL), transferred via syringe. The stirring was continued for an additional 30 min, the mixture transferred to an Erlenmeyer flask, diluted with ethyl acetate (10 mL), 95% ethanol (10 mL) and water (5 mL) and finally NaBH4 (0.09 g, 3.0 mmol) was added to remove the electrophile excess
100
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
and to perform the dehalogenation of the tellurium atom. After this treatment the product was extracted with ethyl acetate (5⫻30 mL) and washed with water (5⫻50 mL), the organic phase was dried over anhydrous MgSO4 and the solvent evaporated under reduced pressure. The residue is constituted by the 1-butyltelluro-1-halo ethenes which were obtained as yellow liquids after purification by flash chromatography using hexane as eluent. Synthesis of (Z)--organotelluro-,-unsaturated carbonyl compounds from acetylenic tellurides (d).70 A typical procedure for the preparation of the title compounds is as follows. A suspension of zirconocene hydrochloride (1.2 mmol) in THF (2 mL) was stirred at room temperature under nitrogen. A solution of acetylenic telluride (1.0 mmol) in THF (2 mL) was added. After being stirred for 15 min, this reaction mixture was transferred to the solution of acyl halide (1.5 mmol) and CuI (1.0 mmol) in THF (3 mL). After being stirred for 8 h at room temperature, the mixture was quenched by pouring it into saturated aqueous NH4Cl and was extracted with Et2O. Normal handling and chromatography afforded (Z)--organotelluro-,-unsaturated carbonyl compound. Following the precedent methodologies, telluro(stannyl) ketene acetals are achieved by the hydrozirconation of stannyl acetylenes and successive reactions with butyl tellurenyl bromide and NaBH4.71
R
SnBu3-n
Cp2Zr(H)Cl (1.4 equiv) R THF, r.t. H
R = H, n -Bu, C6H13, Ph,
SnBu3-n 1) n -BuTeBr (2 equiv) R SnBu3-n THF, 0°C ZrCp2Cl H TeBu-n 2) NaBH4 (60-81%)
The treatment with NaBH4 is required to reduce the corresponding tellurodibromide formed at the expense of the excess (2 equiv) of n-BuTeBr used, which behaves as brominating agent. General procedure for the synthesis of ketene stannyl(telluro) acetals from stannylacetylenes.71 To a mixture of Cp2Zr(H)Cl (0.721, 2.8 mmol) in THF (10 mL) under nitrogen was added via syringe a solution of the corresponding stannylacetylene (2.0 mmol) in THF (5 mL). The reaction was stirred at room temperature for 15–30 min. The disappearance of the starting material was confirmed by TLC using hexane as the eluent. The resulting solution was cooled to 0°C, and a solution of butyltellurenyl bromide (4.0 mmol) was transferred via syringe. The stirring was continued for an additional 30 min at 0°C and then the mixture was transferred to an Erlenmeyer flask (1 L) and diluted with ethyl acetate (30 mL), water (100 mL) and 95% ethanol (50 mL). Butyl bromide (1.0 mL) and finally NaBH4 (until the mixture turned pale yellow) were added to transform dibutyl ditelluride to the corresponding telluride which is more easily removed by distillation. After this treatment the product was extracted with ethyl acetate (3⫻) and washed with water (3⫻). The organic phase was dried over anhydrous MgSO4 and the solvent partially evaporated. After filtration through Celite® using hexane as the eluent, the product was concentrated under vacuum. Dibutyl telluride was removed by distillation from the crude product using a
3.16
VINYLIC TELLURIDES AND DITELLURIDES
101
Kügelrohr apparatus. Flash column chromatography (hexane) of the residue afforded ketene stannyl(telluro) acetals as yellow liquids. The E configuration of the products, assessed by NOE experiments, is a consequence of the known 100% regio- and E-stereoselectivity of the hydrozirconation of acetylenic stannanes, and the retained configuration in the Zr/Te exchange. The treatment of the obtained ketene acetals with iodine or NBS in excess promotes exclusively Sn/halogen exchange giving the -halogen vinyl dihalogeno tellurides which are dehalogenated to the corresponding telluride by treatment with NaHSO3 or NaBH4. This process occurs with total retention of the configuration as confirmed by NOE/1H NMR measurements.71 NaBH4 EtOH, -40°C R
SnBu3-n I2 /2.15 equiv R
H
TeBu-n 0°C, r.t. -6h H
I TeBu-n I I
R
I
H
TeBu-n
+ n -Bu3SnI
1)NaHSO3 2) KF -n -Bu3SnF
R
I
H TeBu-n (56-92%)
O NBS (2.5 equiv), CH2Cl2 R -78°C, 6-12h R = H, C4H9, C6H13, Ph,
H
Br TeBu-n Br Br
+ n -Bu3Sn-N
NaBH4 EtOH, -40°C
NaHSO3
O R
Br
H
TeBu-n
R
Br
H TeBu-n (36-60%)
General procedure for the synthesis of -iodovinyl tellurides from ketene stannyl(telluro) acetals.71 To a solution of the appropriate ketene stannyl(telluro) acetal (1.0 mmol) in THF (5 mL) under nitrogen, and cooled to 0°C was added dropwise a solution of iodine (0.54, 2.15 mmol) in THF (5 mL). The reaction mixture was stirred for 3 h and for an additional 3 h at room temperature. Then it was transferred to an Erlenmeyer flask and treated with a solution of sodium thiosulphate (3 g/80 mL of H2O) under stirring for 30 min. The dark brown colour turned clear yellow, and the organic phase was separated, subsequently treated with a solution of KF·2H2O (2.5 g) in H2O (25 mL), and stirred for an additional 30 min. The mixture was extracted with ethyl acetate and washed with a saturated NH4Cl aqueous solution (3⫻) and water (3⫻). The organic phase was dried over anhydrous MgSO4, and after filtration, the solvent was evaporated under reduced pressure, resulting in a mixture of a white precipitate and a yellow residue. The product was immediately purified by column chromatography, using hexane as the eluent. General procedure for the synthesis of -bromovinyl tellurides from ketene stannyl (telluro) acetals.71 To a solution of the appropriate ketene stannyl(telluro) acetal (1.0 mmol) in CH2Cl2 (10 mL) cooled at ⫺78°C (at 0°C for 5 h) was added dropwise a solution of NBS (0.445 g, 2.5 mmol) in CH2Cl2 (25 mL). Th reaction mixture was stirred for 6 and 12 h (R⫽H). It was transferred to an Erlenmeyer flask and treated with a solution
102
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
of sodium thiosulphate (3 g/80 mL of H2O) under stirring for 30 min. The solution turned clear yellow, and the mixture was extracted with ethyl acetate and washed with a saturated NH4Cl aqueous solution (3⫻) and water (3⫻). The organic phase was dried over anhydrous MgSO4, and after filtration, the solvent was evaporated under reduced pressure. The residue was immediately purified by column chromatography, using hexane as the eluent. Telluro ketene acetals are also accessible by the insertion of unsaturated carbenes into Te–Te bond. By the treatment of solutions of diphenyl ditelluride and an unsaturated triflate in DMF with t-BuOK, the corresponding telluro ketene acetals are formed.72 R
OTf
R1
H
t -BuOk DME, 50°C
R
:
R1
PhTeTePh
R
TePh
R1
TePh
(26-30%)
R, R1 = Me, (CH2)4
General procedure.72 To a flame-dried, three-necked, 250 mL, round-bottomed flask equipped with argon inlet, addition funnel and gas bubbler was added 100 mL of dry 1,2dimethoxyethane (DME) with 0.20 g (0.98 mmol) of triflate [R, R1⫽Me] and 0.50 g (1.2 mmol) of diphenyl ditelluride. The reaction mixture was cooled to ⫺50°C and a solution of potassium t-butoxide (0.15 g, 1.3 mmol) in 50 mL of dry DME was added dropwise. After the addition, stirring was continued for 15 min at ⫺50°C, then the reaction was allowed to warm to room temperature. DME was then removed on a rotary evaporator and the residue taken up in hexane and filtered. The resulting coloured solution was chromatographed on activated silica (hexane as eluent). Isolated yield was 0.12 g (26%), as an orange oil. Further efforts have been devoted to the synthesis of telluro(thio)ketene acetals with high regio- and stereochemistry. The E and Z isomers were obtained by two different routes.73 The E isomer resulted by the syn hydroalumination of thioacetylenes with DIBAL-H followed by the addition of n-BuLi and capture of the obtained intermediate with BuTeBr. In contrast, the Z isomer was attained as the major isomer (80–93%) by the anti addition of the Zweifel reagent [lithium di(isobutyl)-n-butyl aluminate hydride] to the thioacetylene followed by trapping of the intermediate with BuTeBr. R
SPh
DIBAL-H hexane, reflux
R n -BuTeBr benzene/THF, 0°C H
R
SPh
H
Al(i-Bu)2
R
SPh
H
Al-(i -Bu)2 Bu
SPh
TeBu-n E (50-80%)
THF DIBAL-H + n -BuLi 0°C
n -BuLi hexane, 0°C
[HAl-(i-Bu)
R = C3H7, C4H9, Ph,
+ 2]Li
R
R H
Bu TeBu-n R n -BuTeBr/LiCl R + THF-benzene H SPh H 0°C major product (57-65%)
SPh
SPh TeBu-n
Bu Al-(i -Bu)2 Li+ SPh
3.16
VINYLIC TELLURIDES AND DITELLURIDES
103
Synthesis of (E)-1-butyltelluro-1-phenylthio-1-alkenes (typical procedure).73 To DIBAL-H (2.0 mL, 1.0 mmol, 1 M in hexane) in hexane (5.0 mL) under N2 a solution of 1-phenylthio-1-hexyne (0.2 g, 1.0 mmol) in hexane (1.0 mL) was added via syringe at room temperature. The reaction was refluxed for 60 min, then n-BuLi (1.53 mL, 2.0 mmol, 1.3 M in hexane) was added dropwise at 0°C and stirring was continued for 30 min. A solution of n-BuTeBr/LiCl (4.0 mmol) was prepared by the addition of Br2 (0.32 g, 1.0 mmol) in benzene or CCl4 (10 mL) to a solution of n-(BuTe)2 (0.73 g, 2.0 mmol) in THF (10 mL) at 0°C under stirring for 10 min followed by the addition of LiCl (1.3 g). After additional 30 min stirring, the mixture was transferred to an Erlenmeyer flask and diluted with ethyl acetate (10 mL), 95% ethanol (10 mL) and water (10 mL). Butylbromide (0.64 mL, 6.0 mmol) and finally NaBH4 (0.18 g, 6.0 mmol) were added to transform the (C4H9)2Te into the corresponding telluride, which is more easily removed by distillation. After the usual work-up the product was dried (MgSO4) and the solvent evaporated under vacuum. The (C4H9)2Te was removed by distillation from the crude product using a Kügelrohr oven. The residue was purified by PTLC, using hexane as mobile phase. (E)-1-butyltelluro-1phenylthio-1-hexene – yield: 0.25 g (80%).
3.16.8 The behaviour of vinylic tellurides towards several reagents and reaction conditions used in organic synthesis A systematic study was undertaken to ascertain the behaviour of functionalized vinylic tellurides, such as those depicted in the following figure towards several reagents and reaction conditions.74
HO
TeBu-n
TeBu-n
HO
HO EtO
n -BuTe OH
• • • •
TeBu-n OEt
Protection of hydroxy groups as the THP and tert-butyldimethyl silyl ethers and, conversely, deprotection of these derivatives to the original alcohols. Acetylation of the hydroxy group and hydrolysis of the acetoxy group; oxidation of the hydroxy group by MnO2 in ether or alternatively by Dess-Martin periodinane, and the reduction of the obtained aldehyde by NaBH4. Hydrolysis of the diethylacetal function employing p-toluenesulphonic acid in acetone, pyridinium p-toluene-sulphonate in EtOH, and a suspension of SiO2 in hexane. In all cases the corresponding aldehyde is obtained in high yield as a Z/E isomeric mixture. Transmetallation of acetal with Me2Cu(CN)Li2 followed by treatment with c-hexenones giving the 1,4-addition product. Alternatively, transmetallation with n-BuLi and reaction with benzaldehyde giving the expected alcohol.
104
•
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
The reaction of 3- and 2-butyltelluro aldehydes with n-BuLi gives the corresponding allylic alcohols showing the preferential attack to the carbonyl group.74,75 n -BuTe
CHO
R
1) n -BuLi THF, -78°C 2) H2O
n -BuTe
1) n -BuLi THF, -78°C 2) H2O
TeBu-n CHO
OH 53% R
TeBu-n OH (42-47%)
R = Ph, C5H11
In contrast, when the n-butyltellurium moiety and the carbonyl group are attached to different substrates, the Te atom exhibits high selectivity for the n-BuLi attack, as observed when a 1:1 mixture of a vinyl telluride and a carbonyl compound is reacted with 1 equiv of n-BuLi. O
Ph
+ R TeBu-n
n -BuLi R1 THF, -78°C
R, R1 = (CH2)5 OH R = H; R1 = Ph, ( + Ph O TeBu-n + R
Ph
36%)
n -BuLi R1 THF, -78°C
O
+ TeBu-n R
TeBu-n
O + R
R = R1 = (CH2)5, ( +n -C5H11 OH R = H; R1 = Ph, ( + Ph
R1 OH
Ph OH R R1 69%
n -BuLi R1 THF, -78°C
TeBu-n
R Ph
41%)
R, R1 = (CH2)5 n -C5H11
R R1 OH 61, 64%
70, 59%
OH R, R1 = (CH2)5 R = H; R1 = Ph, ( + Ph Ph
Ph
TeBu-n n -BuLi n -C5H11 OH R1 THF, -78°C R (34, 47%) R1 50%) TeBu-n
Bu-n trace)
Non-conjugated substrates, such as 5-oxocarbonyl vinyl tellurides undergo an intramolecular version of the above-described protocol, achieving the synthesis of cycloalkenols. R OH
O R R = Me, Et
TeBu-n
n -BuLi THF, -78°C 53, 56%
REFERENCES
105
REFERENCES 1. For preceding review articles see: (a) Comasseto, J. V.; Ling, L. W.; Petragnani, N.; Stefani, H. A. Synthesis 1997, 373. (b) Petragnani, N.; Stefani, H. A. Tetrahedron 2005, 61, 1613, Section 7. 2. Trofimov, B. A.; Gusarova, N. K.; Amasova, S. V. J. Org. Chem. USSR 1977, 13, 413. 3. Trofimov, B. A.; Amasova, S. V.; Gusarova, N. K.; Musorin, G. K. Tetrahedron 1982, 38, 713. 4. Trofimov, B. A.; Amosova, S. V.; Gusarova, N. K.; Potapov, V. A.; Tatarinova, A. A. Sulfur Lett. 1983, 1, 151. 5. Potapov, V. A.; Amosova, S. V.; Kashik, A. S. Tetrahedron Lett. 1989, 30, 613. 6. Potapov, V. A.; Kashik, A. S.; Amosova, S. V. J. Org. Chem. USSR 1988, 1807. 7. Trofimov, B. A.; Gusarova, N. K.; Tatarinova, A. A.; Amosova, S. V.; Sinegovskaia, L. M.; Keiko, V. V.; Potapov, V. A. J. Org. Chem. USSR 1984, 24, 1642. 8. (a) Gusarova, N. K.; Trofimov, B. A.; Tatarinova, A. A.; Potapov, V. A.; Sinegoskaia, L. M.; Amosova, S. V.; Voronkov, M. G. J. Org. Chem. USSR 1988, 24,1686. (b) Gusarova, N. K.; Trofimov, B. A.; Tatarinova, A. A.; Potapov, V. A.; Sinegoskaia, L. M.; Amosova, S. V.; Voronkov, M. G. Tetrahedron 1988, 44, 6739. 9. Barros, S. M.; Dabdoub, M. J.; Dabdoub, V. B.; Comasseto, J. V. Organometallics 1989, 8, 1661. 10. Trofimov, B. A.; Potapov, V. A.; Gusarova, N. K.; Tatarinova, A. A.; Amosova, S. V. J. Org. Chem. USSR 1985, 21, 1029. 11. Uemura, S.; Fukuzawa, S. I.; Patil , S. R. J. Organomet. Chem. 1983, 243, 9. 12. Dabdoub, M. J.; Dabdoub, V. M.; Comasseto, J. V.; Petragnani, N. J. Organomet. Chem. 1986, 308, 211. 13. Ohe, K.; Takahashi, H.; Uemura, S.; Sugita, N. J. Org. Chem. 1987, 52, 4859. 14. Potapov, V. A.; Kashik, A. S.; Gusarova, N. K.; Mink, V. I.; Sadekov, I. D.; Trofimov, B. A.; Amosova, S. V. J. Org. Chem. USSR 1987, 23, 596. 15. Potapov, V. A.; Amosova, S. V. Phosphorus Sulfur Silicon Relat. Elem. 1993, 79, 277. 16. Zeni, G.; Formiga, H. B.; Comasseto, J. V. Tetrahedron Lett. 2000, 41, 1311. 17. Dabdoub, M. J.; Dabdoub, V. M.; Guerrero Jr., P. G.; Silveira, C. C. Tetrahedron 1997, 53, 4199. 18. Dabdoub, M. J.; Dabdoub, V. M.; Comasseto, J. V. Tetrahedron Lett. 1992, 33, 2261. 19. Dabdoub, M. J.; Dabdoub, V. M. Tetrahedron 1995, 51, 9839. 20. Stefani, H. A.; Cardoso, L. D. G.; Valduga, C. J.; Zeni, G. Phosphorus Sulfur Silicon Relat. Elem. 2001, 172, 167. 21. Dabdoub, M. J.; Dabdoub, V. M.; Pereira, M. A. Tetrahedron Lett. 2001, 42, 1595. 22. Marino, J. P.; Nguyen, H. N. J. Org. Chem. 2002, 67, 6841. 23. Dabdoub, M. J.; Comasseto, J. V. J. Organomet. Chem. 1988, 344, 167. 24. Zhao, C.-Q.; Huang, X. Synth. Commun. 1997, 27, 249. 25. Zhao, C.-Q.; Li, J.-L.; Meng, J. B.; Wang, Y.-M. J. Org. Chem. 1998, 63, 4170. 26. Dabdoub, M. J.; Cassol, T. M. Tetrahedron 1995, 51, 12971. 27. Ohe, K.; Takahashi, H.; Uemura, S.; Sugita, N. J. Organomet. Chem. 1987, 326, 35. 28. Ohe, K.; Takahashi, H.; Uemura, S.; Sugita, N. Nippon Kagaku Kaishi 1987, 1469. 29. Wudl, F.; Nalewajek, D. J. Organomet. Chem. 1981, 217, 329. 30. Minkin, V. I.; Sadekov, I. D.; Rivkin, B. R.; Zakharov, A. V.; Nivorozhkin, V. L.; Kompan, O. E.; Struchkov, Y. T. J. Organomet. Chem. 1997, 536–537, 233. 31. Barrientos-Astigarraga, R. E.; Castelani, P.; Sumida, C. Y.; Zukerman-Schpector, J.; Comasseto, J. V. Tetrahedron 2002, 58, 1051. 32. Huang, X.; Liang, C. G.; Xu, Q.; He, Q. W. J. Org. Chem. 2001, 66, 74. 33. Proiadakov, A. G.; Kalabin, G. A.; Buzilova, S. R.; Vereshchagin, L. I.; Panov, A. M.; Ratovski, G. V. J. Org. Chem. USSR 1981, 17, 2157.
106
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
34. Buzilova, S. R.; Sadekov, J. D.; Lipovich, T. L.; Filippova, T. M.; Vereshchagin, L. I. J. Gen. Chem. USSR 1977, 47, 1828. 35. Takahashi, H.; Ohe, K.; Uemura, S.; Sugita, N. Nippon Kagaku Kaishi 1987, 1508. 36. Mo, X. S.; Huang, Y. Z. Tetrahedron Lett. 1995, 36, 3539. 37. Braga, A. L.; Alves, E. F.; Silveira, C. C.; Andrade, L. H. Tetrahedron Lett. 2000, 41, 161. 38. Yang, W. B.; Oh, D. Y.; Lee, C. W. Tetrahedron Lett. 2000, 41, 5103. 39. Marino, J. P.; Nguyen, H. N. J. Org. Chem. 2002, 67, 6291. 40. Zhao, C. Q.; Li, J. L.; Meng, J. B. ; Wang, Y. M. J. Org. Chem. 1998, 63, 4170. 41. Moura Campos, M.; Petragnani, N. Tetrahedron 1962, 18, 527. 42. Uemura, S.; Miyoshi, H.; Okano, M. Chem. Lett. 1979, 1357. 43. Comasseto, J. V.; Stefani, H. A.; Chieffi, A. Organometallics 1999, 10, 845. 44. Zukerman-Schepctor, J.; Castellano, E. E.; Oliva, G. Acta Cryst. 1991, C47, 960. 45. Stefani, H. A.; Petragnani, N.; Zukerman-Schpector, J.; Dornelles, L.; Silva, D. O.; Braga, A. L. J. Organomet. Chem. 1998, 562, 127. 46. Huang, X.; Wang, Y. P. Tetrahedron Lett. 1996, 37, 7417. 47. Zeni, G.; Chieffi, A.; Cunha, R. L. O. R.; Zukerman-Schpector, J.; Stefani, H. A.; Comasseto, J. V. Organometallics 1999, 18, 803. 48. Kauffman, T.; Ahlers, H. Chem. Ber. 1983, 116, 1001. 49. (a) Han, L. B.; Ishihara, K. I.; Kambe, N.; Ogawa, A.; Ryu, I.; Sonoda, N. Phosphorus Sulfur Silicon 1992, 67, 243. (b) Han, L. B.; Ishihara, K. I.; Kambe, N.; Ogawa, A.; Ryu, I.; Sonoda, N. J. Am. Chem. Soc. 1992, 114, 7591. 50. Chen, C.; Crich, D. Tetrahedron Lett. 1993, 34, 1545. 51. Crich, D.; Chen, C.; Hwang, J. T.; Yuan, H.; Papadatos, A. Walter, R. I. J. Am. Chem. Soc. 1994, 116, 8937. 52. Engman, L.; Gupta, V. J. Chem. Soc. Chem. Commun. 1995, 2515. 53. Ogawa, A.; Yokoyama, K.; Yokoyama, H.; Obayashi, R.; Kambe, N.; Sonoda, N. J. Chem. Soc. Chem. Commun. 1991, 1748. 54. Dabdoub, M. J.; Comasseto, J. V. Organometallics 1988, 7, 84. 55. Lee, C. W.; Koh, Y. J.; Oh, D. Y. J. Chem. Soc. Perkin Trans. 1 1994, 717. 56. Silveira, C. C.; Perin, G.; Braga, A. L. Tetrahedron Lett. 1995, 36, 7361. 57. Silveira, C. C.; Perin, G.; Braga, A. L.; Dabdoub, M. J.; Jacob, R. G. Tetrahedron 1999, 55, 7421. 58. Silveira, C. C.; Perin, G.; Braga, A. L.; Dabdoub, M. J.; Jacob, R. G. Tetrahedron 2001, 57, 5953. 59. Silveira, C. C.; Perin, G.; Braga, A. L.; Petragnani, N. Synlett 1995, 58. 60. Silveira, C. C.; Perin, G.; Boeck, P.; Braga, A. L.; Petragnani, N. J. Organomet. Chem. 1999, 584, 44. 61. See ref. 10 in the precedent ref. 60. 62. Gerard, J.; Bietlot, E.; Hevesi, J. Tetrahedron Lett. 1998, 39, 8735. 63. Huang, X.; Liang, C. G. J. Chem. Soc. Perkin Trans. 1 1999, 2625. 64. Stefani, H. A.; Comasseto, J. V.; Petragnani, N.; Braga, A. L.; Menezes, P. H.; Gusevskaya, E. V. Phosphorus Sulfur Silicon 1997, 126, 211 and references therein. 65. Braga, A. L.; Zeni, G.; Andrade, L. H.; Silveira, C. C. Synlett 1997, 595. 66. Dabdoub, M. J.; Cassol, T. M.; Barbosa, S. L. Tetrahedron Lett. 1996, 37, 831. 67. Dabdoub, M. J.; Begnini, M. L.; Guerrero Jr., P. G. Tetrahedron 1998, 54, 2371. 68. Dabdoub, M. J.; Begnini, M. L.; Guerrero, P. G.; Baroni, A. C. M. J. Org. Chem. 2000, 65, 61. 69. Sung, J.-W.; Park, C. P.; Gil, J. M.; Oh, D. Y. J. Chem. Soc. Perkin Trans. 1 1997, 591. 70. Sung, J. W.; Yang, W. B.; Oh, D. Y. Tetrahedron Lett. 1996, 37, 7537. 71. Dabdoub, M. J.; Baroni, A. C. M. J. Org. Chem. 2000, 65, 54. 72. Stang, P. J.; Roberts, K. A.; Lynch, L. E. J. Org. Chem. 1984, 49, 1653. 73. Dabdoub, M. J.; Guerrero, P. G. Tetrahedron Lett. 2001, 42, 7167.
3.17
ACETYLENIC TELLURIDES
107
74. Rahmeier, L. H. S.; Comasseto, J. V. Organometallics 1997, 16, 651. 75. Dabdoub, M. J.; Jacob, R. G.; Ferreira, J. T. B.; Dabdoub, V. M.; Marques, F. A. Tetrahedron Lett. 1999, 40, 7159.
3.17
ACETYLENIC TELLURIDES
Like vinylic tellurides, acetylenic tellurides can be prepared by two general approaches, starting respectively from nucleophilic or electrophilic tellurium species. 3.17.1 From nucleophilic tellurium reagents 3.17.1.1
Sodium ethynyl tellurolates
R
H
1) Na /NH3 2) Te
R
TeNa
R1X / NH3 liq. (21-65%)
TeR1
R
(ref. 1-5)
R = H, Ph, Me, t -Bu, S-Pr, vinyl, -CH=CH-CH=CH2; R1= Me R = Me; R1 = Et R = vinyl; R1 = n-Bu
Methyl phenylethynyl telluride (typical procedure).3 To NaNH2 (from 6.0 g, 0.26 mol Na) in liquid NH3 (250 mL) is added phenylacetylene (25 g, 0.25 mol) dropwise, and then Te powder (30 g, 0.24 mol) in small portions, stirring well for 30 min. Methyl iodide (36 g, 0.25 mol) is added over 20 min to the tellurolate solution. The NH3 is then evaporated, the residue extracted with ether and the ether solution washed with H2O and dried (MgSO4). The residue is distilled under vacuum, giving the product (28 g (46%); b.p. 122–124°C/2 torr). 3.17.1.2
Lithium alkyl and ethynyl tellurolates
Lithium butyl tellurolate reacts with phenylbromoethyne to give butyl phenylethynyl telluride: n -BuTeLi + PhC CBr
n -BuTe-C CPh (58%)
(ref. 6)
Otherwise a variety of acetylene tellurides have been prepared by the reaction of lithium ethynyl tellurolates with alkyl halides. R
H
1) n -BuLi/THF/0°C R 2) Te, THF, reflux
TeLi
R1X (73-97%)
R
TeR1
R = Me3Si, Me, n -Bu, Ph; R1= CH2Cl; X = I (ref. 5) R = Ph; R1 =Et, n -Bu, n -dodecyl, CH2CH2Ph, i -Pr, CH(Me)C3H7; X = Br (ref. 7)
108
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
Bis-ethynyl tellurides are accessible from bromoacetylenes. TeLi + Ph
R
Br
THF 0°C to r.t.
R
Te
Ph
(ref. 6)
(58,87%)
R = n -Bu, Ph
Phenyl(alkyltelluro)acetylenes (general procedure).7 n-BuLi (1.35 M in hexane, 22.2 mL, 30 mmol) is added dropwise to phenylacetylene (3.10 g, 30.0 mmol) in THF (15 mL) at 0°C under N2. After stirring for 5 min at 0°C, elemental Te (3.90 g, 30.0 mmol) is added and the mixture refluxed until the Te disappears (~30 min). The heat source is removed and the alkyl halide (30 mmol) is added. The mixture is stirred for 40 min at room temperature, then diluted with ether (60 mL), washed with brine and the layers separated. The organic phase is dried (MgSO4), evaporated and the residue purified by SiO2 flash chromatography (elution with hexane). 3.17.2 From electrophilic tellurium reagents 3.17.2.1
From alkynyl Grignard and lithium compounds and organyl tellurenyl halides M + ArTeBr
Ph
M = MgBr M = Li
THF 0°C to r.t. (73 %)
Ph
TeAr
Ar = Ph, p -MeOC6H4, p -EtOC6H4 (90-95%) (ref. 8) Ar = p -MeOC6H4 (73%) (ref. 7)
Phenyl(p-methoxyphenyltelluro)acetylene (typical procedure).7 To a solution of lithium phenylacetylide (20.0 mmol), prepared as described above, is added dropwise a solution of p-methoxyphenyltellurenyl bromide (prepared by adding bromine (1.60 g, 10.0 mmol)) in benzene (5 mL) to a solution of the corresponding ditelluride (4.69 g, 10 mmol) in THF (10 mL) at 0°C under N2. The reaction mixture is stirred for 1 h at room temperature and then treated as described above to give the product (4.90 g (73%)), which is recrystallized from EtOH (m.p. 71–72°C). Some related procedures have been reported: •
A one-pot reaction of phenylacetylene with a dialkyl ditelluride and an alkyl iodide under phase transfer catalysis (method a). The same product can be obtained by using the tellurenyl iodide prepared in situ (method b).9 a) RTeTeR + PhC CH + MeI
KOH/benzene dibenzo-18-crown-6
PhC TeR + MeTeR
R = Me, i -pr, n -Bu, t -Bu b) RTeTeR R = i -pr
I2 RTeI benzene
PhC CH KOH/benzene dibenzo-18-crown-6
PhC CTeR + KI + H2O
3.17
•
ACETYLENIC TELLURIDES
109
The reaction of dialkylditellurides with pressurized acetylenes in the presence of an electrophilic reagent (alkyl halide, Lewis acid), in the system KOH/crown ether/benzene, gives rise to alkylethynyl tellurides and 1,2-bis-alkyltelluroacetylenes in high yields.10
The preferential formation of mono- or bis-substituted product is determined by a minor or major molar ratio KOH/RTeTeR, respectively. The reaction was rationalized assuming the intermediacy of the high electrophilic species [RTeTe(R1)R]X⫺ (R1⫽Alkyl and X⫽Br, I).
RTeTeR + HC CH
KOH/dibenzo-18-crown-6/benzene
RTeC CH + RTe C C TeR
E
R = Me, Et, i-pr E = MeI, EtI, EtBr, SnCl4, BF3.Et2O
Alkyl ethynyltellurides from dialkylditellurides and pressurized acetylene in the presence of electrophilic reagents (typical procedure).10 To a mixture of di-isopropyl ditellurides (4.5 g, 13 mmol), powdered KOH (20 g, 303 mmol), methyl iodide (2 g, 14 mmol), dibenzo-18-crown-6 (0.2 g) and benzene (50 mL) was heated (40–50°C) in a 1 L rotating autoclave under acetylene pressure (14 atm) for 5 h. After addition of water the mixture was extracted with benzene, the organic layer was separated and dried over K2CO3. After evaporation of benzene the residue was diluted with ether and precipitated dibenzo18-crown-6 was filtered off. After evaporation of ether the residue was distilled in vacuo giving the product (2.3 g, 96% yield). •
The reaction of lithium or sodium aryltellurolate with alkynyl phenyl iodonium triflates11 or tosylates.12 RC
CI+Ph-OTf
PhTeLi (PhLi + Te /ether)
RC CTePh (54-84%)
R = Me3Si, CN, CO2Me, COPh, COt -Bu RC
CI+Ph-OTs
ArTeNa (ArTeTeAr /NaBH4) DMF
RC CTeAr (48-70%)
R = Ph, t -Bu Ar = Ph, naphthyl, p -MeC6H4, p -BrC6H4
Alkynylphenyl tellurides from aryltellurolates and alkynyliodonium salts (general procedure).11 To a stirred solution of PhLi in Et2O/cyclohexane at room temperature under N2, tellurium powder was added and the solution was stirred for 1 h. The appropriate iodonium triflate was added and the solution was stirred for 2 h. The product was eluted through a small portion of silica gel with CH3CN and the volume was reduced in vacuo followed by purification via radial chromatography.
110
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
A mixture of the appropriate diaryl ditelluride (1 mmol) and sodium borohydride (2.2 mmol) in DMF (10 mL) was stirred under an N2 atmosphere at 50–60°C until the solution was clear. The mixture was allowed to cool to room temperature, an appropriate alkynylphenyliodonium tosylate (2 mmol and DMF (10 mL)) was added and stirring was continued at 70–80°C under N2. The course of the reaction was followed by TLC. When the reaction was completed, the mixture was cooled, diluted with water (15 mL) and the product was extracted with petroleum ether (3⫻10 mL). The combined extracts were washed with water, and dried with MgSO4. After removal of the solvent, the residue was chromatographed on a column of silica gel using CH2Cl2 as eluent to give the acetylenic telluride. 3.17.2.2
From tellurium tetrachloride and alkynyllithium compounds
In strict correlation with the early method for the preparation of symmetrical diaryl tellurides by treatment of tellurium(IV) halides with 4 mol equiv of aryl Grignard reagent13 (see Section 3.1.2.4), dialkynyl tellurides are prepared starting from bromomagnesium14 and lithium acetylenic derivatives.15 TeCl4 + 4 R M = MgBr M = Li
M
R
Te
R + R
R
R = Ph (solvent benzene /ether) (ref. 14)* R = Me, Et, n -Pr, Ph, Me3Si (42-62 %, solvent THF) (ref. 15)
*Owing to the difficulty in purification the product was isolated as the corresponding diiodide (Ph C C)2Tel2 in 33% yield.
Dialkynyl tellurides (general procedure).15 To a solution of TeCl4 (11 mmol) in THF (15 mL), cooled at ⫺78°C, is added dropwise with vigorous stirring the 1-alkynyllithium reagent (46 mmol) in THF (25 mL). The solution is warmed slowly to room temperature, heated at 55–60°C for 1 h in the dark and then evaporated under vacuum. The residue is extracted with pentane, the pentane solution evaporated under vacuum and the obtained crude products are purified by vacuum distillation for R⫽Et (b.p. 45–46°C/0.075 torr; 56% based on TeCl4), R⫽n-Pr (b.p. 67–68°C/0.075 torr; 69% based on TeCl4), R⫽Me3Si (b.p. 135°C/15 torr; 60% based on TeCl4), and by crystallization (pentane, m.p. 50–52°C) or distillation (110°C/15 torr) for R⫽Me (42% based on TeCl4). In the case of R⫽Ph, no pure (Ph–h )2Te is obtained, and the by-product (Ph– h –)2 is sublimed from the crude product under a dynamic vacuum at 100°C (30%). In a related procedure, tellurium tetrachloride is treated with lithium amides giving tellurium(II) amides via the successive reduction and amination of TeCl4. These species, which provide Te2+ electrophiles, react with alkynyllithium reagents, giving dialkynyl tellurides in moderate yields.16 TeCl4
LiNR2
[Te(NR2)2]
R1
H /LiNR2 (24-76%)
R1
R1 = Ph, p -Me, p -MeOC6H4, n -Bu, Cl(CH2)3, Me3Si, HC
C(CH2)4,
R = i -Pr, Me3Si
Te
R1
3.18
ALLENIC AND PROPARGYLIC TELLURIDES
111
The diynes (R⬘–– h –– h –R⬘) are formed as by-products, therefore suggesting that the previously described reaction of TeCl4 with 4 mol equiv of the lithium alkynyls is partially operative. Bis-phenylethynyl telluride (typical procedure).16 To LDA (8 mmol) in THF is added a solution of TeCl4 (0.28 g, 2 mmol) in THF at ⫺78°C, and the mixture stirred at that temperature for 2 h. Phenylacetylene is injected into the resulting orange solution, the mixture is stirred at ⫺78°C for 2 h and then allowed to rise to 0–18°C for an additional 16 h. The mixture is poured into brine, and the organic layer extracted with ether and dried (NaSO4). The crude material is purified by SiO2 column chromatography (elution with n-hexane/CH2Cl2), giving bis-phenylethynyl telluride and 1,4-diphenylbutadiyne in yields of 40 and 4%, respectively. 3.17.3 Synthesis of internal acetylenes from vinylic tellurides Treatment of vinylic tellurides prepared by photopromoted carbotelluration of terminal acetylenes (see Section 3.16.3) with aqueous NaOCl, followed by pyrolysis, affords internal acetylenes in good yields.17 The combination of the photopromoted carbotelluration with the elimination reaction, provides a useful method for the introduction of alkyl groups to terminal acetylenes. RTeR1 + R2
H
R 1) NaOCl aq. 2) (62-92%) R2
hν or AIBN
R2 R (46-92%)
R1Te
R = t -Bu; R1 = Me, t -BuCH2, n -C12H25 R2 = Ph, Me3Si, p -MeC6H4 R = i -pr; R1 = R2 = Ph
Synthesis of internal acetylenes.17 Into a CHCl3 solution (5 mL) of vinylic telluride (2 mmol) was added an aqueous sodium hypochlorite solution (5–8 equiv) at 25°C, and the mixture was stirred for 30 min. The products were extracted with CHCl3, and the extract was dried over MgSO4, concentrated and heated gradually in a Kügelrohr distillation apparatus up to 250°C in vacuo, giving rise to the corresponding internal acetylenes.
3.18
ALLENIC AND PROPARGYLIC TELLURIDES
Allenic butyl tellurides have been prepared by two methods: (a) Reaction of butyltellurenyl bromide with the allenyl rnagnesium bromide generated from propargyl bromide and Mg in the presence of HgCl2.18 H
Mg /HgCl2 Br ether, 0°C
n -BuTeBr
. MgBr
. TeBu-n
112
3. PREPARATION OF THE PRINCIPAL CLASSES OF ORGANIC TELLURIUM
(b) SN2-type reaction of propargylic bromides or tosylates with butyltellurolate anions.18,19 R H Br(OTs) R = H, Me
n -BuTeNa
R
[(n -BuTe)2 /NaBH4] EtOH
H
n -BuTeLi
R Br
THF, 0°C
.
.
H TeBu-n
(57-62%)
TeBu-n
(100%)
R=H
Synthesis of allenic tellurides.18 To a solution of allenyl bromomagnesium (0.01 mol) in ether (~15 mL) under N2 at 0°C, a solution of butyltellurenyl bromide (0.01 mol) in THF/benzene obtained as previously described was added at once. The orange-red solution was stirred for 30 min at 0°C, diluted with AcOEt (60 mL) and washed with a saturated NH4Cl solution. After drying over MgSO4 and solvent removal, the residue was distilled in a Kügelrohr apparatus (80–90°C/0.2 mmHg) to give the pure telluro allene. Yield: 1.207 g (54%). To a clear yellow solution of the sodium butyltellurolate (5.0 mmol) in 95% ethanol (50 mL), obtained at room temperature as previously described, 3-bromo-1-butyne (0.659 g, 5.0 mmol) was added. The reaction is complete after stirring for 5 min (for 3-bromo-1propyne reflux for 2 h was necessary). The reaction was then diluted with AcOEt (50 mL) and washed with a saturated NH4Cl solution. After drying over MgSO4 and solvent removal, the residue was distilled in a Kügelrohr apparatus (110–120°C/0.2 mmHg) to give pure telluro allene as a orange yellow oil. Yield: 0.731 g (62%). Propargyl bromide (2 mmol) was added at 0°C into a THF solution (5 mL) of n-BuTeLi (2 mmol), prepared from n-butyllithium (1.63 M, 1.23 mL, 2 mmol) and tellurium powder (256 mg, 2 mmol) at 0°C, and the reaction mixture was stirred for 15 min at the same temperature. At this stage, allenic telluride is formed and the resulting solution can be used for subsequent Li–Te exchange in the one-pot method. Allenic telluride was isolated quantitatively by removal of the solvent in vacuo, filtration using hexane (5 mL), followed by evaporation. The obtained telluride was essentially pure to show reasonable NMR spectra, but elemental analyses have not been successful because of the instability towards light and/or air.19 In disagreement with the above results, the propargyl-bromide of non-terminal acetylene gives only the corresponding propargyl telluride.18
Me
n -BuTeNa Br [(n-BuTe)2 /NaBH4] EtOH
Me (82%)
TeBu-n
REFERENCES
113
Allenyl tellurides can be submitted to Te/Li exchange and subsequent reaction with aldehydes, giving homopropargylic alcohols.18 R H
.
H
1) n -BuLi R1R2CO
TeBu-n 2) THF, -78°C
R = H, Me R1 = Ph, 2-furyl, styryl
H
H
OH