http://only-paper.ucoz.ru
Page
A
Assemble the head Use pattern: Page2 / Page3.
Cut out A1 by cutting along the lines...
3 downloads
233 Views
3MB Size
Report
This content was uploaded by our users and we assume good faith they have the permission to share this book. If you own the copyright to this book and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Start by pressing the button below!
Report copyright / DMCA form
http://only-paper.ucoz.ru
Page
A
Assemble the head Use pattern: Page2 / Page3.
Cut out A1 by cutting along the lines. Cut along the line marked .
Wedding Bear Bridegroom
Glue down the glue tabs one at a time in turn.
Cut a slot right in to the apex of the triangular glue tab.
Parts No.
Glue spot
Scissors line Parts name
Triangular glue tab
Make a mountain fold on A1. Trace along the mountain fold line with a pencil, scoring it to make it easier to fold.
A1
Notation Key Scissors line
Scissors
Mountain fold
Paste, or woodwork glue
Valley fold
Stencil pen, or bodkin Ruler
A1
Glue spot
A1, B1
Glue reverse side Parts No.
The Assembly instructions are divided into seven blocks: A (head), B (body), C (legs), D (tail coat), E (arm), F (silk hat), and G (message board). Follow the instructions for each block to assemble your teddy bear. marks a basic assembly technique that remains the same regardless of the part. Instructions are printed only for the first instance. Keep scissors and glue away from small children.
Be careful not to cut your fingers when using scissors.
A1 Add a slight curl to A1 when attaching it. Attach the triangular glue tabs so that the front side becomes convex. Using the photo as a guide, attach in the direction of the arrow.
A1
Tools
The parts will be easier to assemble if curled. Using the photo as a guide, apply pressure with the palm of your hand, gradually curling the paper in the direction of the arrow.
A1
A1
http://only-paper.ucoz.ru
Page
Cut out A2 and A3, curl them and glue the triangular glue tabs, attaching each to A1.
Assemble A8, and attach to the head. Assemble A9.
A1
A2
A8
A2 Head
A8
A2
A2 A9
A2
A9
A9
A1
A1 A3
A3
A2
Glue together the remaining glue spots.
Assemble A4 and attach it to A5. A4
A9 A4
*Note: The completed A9 will be attached in the last step.
A5
B
Assemble the body Use pattern: Page4 / Page5.
Attach B1 and B2 together.
Assemble A6 and A7 in the same way, and attach the ears to the head. A6
B2
A4 B1
A7
B1
A5 A1
A4 A5
A6 A7 A2 A3
B2
http://only-paper.ucoz.ru
Page
Attach B4 and B5, then attach B3 and B6.
Assemble B4, B5 and B7. B3
B5 B4
B5
B5
B4 B5
B4
B4 B7
B7
B3 B5
B6
Attach B8, B9 to B4.
B4
B5 B4 B8 B9
Attach B1, B2 to B4, B5. B2
B3 B1
B1
B9
B5 B4
B4 B5
B1
B9
B8
B2
Return B1 to its original position.
B2
Attach B10, B11 and B12 and attach it to B6. B10
B4
B11
Assemble B7. B7
B7 B12
B6 B10
B12
B11
*Note: The completed head will be fitted in a later step.
http://only-paper.ucoz.ru
Page
C
Assemble the legs
Assemble C9 through C16 in the same way.
Use pattern: Page6 / Page7.
C13
Assemble C2 through C8.
C16
C15
C12
C2
C3 C9
C14 C10
C11
Attach the legs to the body that you made earlier. C4
Leave the protruding part out.
C5 C8
C6 C7
B7
C8
C7
B7 C8
C7
C15
Attach C1 through C8 together. C2
C1
C8
C4
C7
Return C8 to its original position.
Fit the head to the body, and attach A9 to complete the legs. C2
C5
C5
Match up the glue spots.
C6
C4
C7
B1
C3
C3
C8
Do not put glue on the protruding parts.
C6
B1
C7 Match up this part.
Return B1 to its original position.
A9
http://only-paper.ucoz.ru
Page
D
Assemble the tail coat
Assemble D1, D2, D3 and D5, to complete the tail coat. D2
Use pattern: Page8.
D1
Attach D1 and D2 together. D5
D3
D2
D1
Assemble the arm
E
Use pattern: Page9 / Page10.
Assemble E1 through E9.
Assemble D3 and attach it to D4. D3
D3
E2 E1 D4
E4 E3
Assemble D5 and D6 in the same way, and attach D3 and D5 together. D5
D3
E6
E5
D4
D6
D3 D5
E7 E8
D4
E9 D6
http://only-paper.ucoz.ru
Page
Attach E1 through E8 together.
Fit both arms to the completed tail coat. Leave the protruding part out.
E1 E2
E3 E2
E1
E3
E9
E9
E2 E5
E8
E4 E4 Return E9 to its original position.
E17
E8
E9
E5 E6 E6
E7
E4 E5 E8 Do not put glue on the protruding parts.
E9
E8
E7
Assemble E10 through E18 in the same way. E17 E15 E14
E16 E18
E13
E12
E11
E10
Put on the tail coat, to complete the arms section.
E8
http://only-paper.ucoz.ru
Page
F
Assemble the silk hat
Assemble G2, G3, G4 and G5 and attach it to G1. Next, stick on G6.
Use pattern: Page11.
G3
G2
Assemble F2 and attach it to F1. F2
G2
G1
F1
G6 F2
G5 G4
Attach F3 and F4 and attach it to F2. Put the hat on Teddy’s head and that completes the top hat assembly. F3
F2
F3 F4 F4
Attach G8, G9, G10 to G7 and attach it to G6. G7
G8
G7 G6
G7
G10 G9
G8
G
Assemble the message board
Assemble G11 and attach it to G1 to complete. G11
Use pattern: Page12.
Choose a message for G1 and stick it on. G1
G11
Message * If writing your own message, please write it on G1. This explanation refers to the attached messages.
G1