aPPLIED ANALYSIS AND DIFFERENTIAL
EQUATIONS
This page intentionally left blank
EDITORS
Ovidiu Carja Loan l Vrabie AlCuza University, O Mayer Msthematics Institute of the Romanian Academy, Romania
aPPLIED ANALYSIS
AND DIFFERENTIAL
EQUATIONS lasi, Romania 4 – 9 september 2006
World Scientific NEW JERSEY LONDON * SINGAPORE * BElJlNG - SHANGHAI * HONG KONG * TAIPEI * CHENNAI
Published by World Scientific Publishing Co. Pte. Ltd. 5 Toh Tuck Link, Singapore 596224 USA office: 27 Warren Street, Suite 401-402, Hackensack, NJ 07601 UK office: 57 Shelton Street, Covent Garden, London WC2H 9HE
British Library Cataloguing-in-Publication Data A catalogue record for this book is available from the British Library.
APPLIED ANALYSIS AND DIFFERENTIAL EQUATIONS Copyright © 2007 by World Scientific Publishing Co. Pte. Ltd. All rights reserved. This book, or parts thereof, may not be reproduced in any form or by any means, electronic or mechanical, including photocopying, recording or any information storage and retrieval system now known or to be invented, without written permission from the Publisher.
For photocopying of material in this volume, please pay a copying fee through the Copyright Clearance Center, Inc., 222 Rosewood Drive, Danvers, MA 01923, USA. In this case permission to photocopy is not required from the publisher.
ISBN-13 978-981-270-594-5 ISBN-10 981-270-594-5
Printed in Singapore.
EH - Appl Analysis & Diff Eqns.pmd
1
1/18/2007, 2:05 PM
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
v
PREFACE The International Conference of Applied Analysis and Differential Equations was held September 4-9, 2006 at the “Al. I. Cuza” University of Ia¸si and the “Octav Mayer” Mathematical Institute of the Romanian Academy of Ia¸si, Romania. It was supported by the Project CERES 4-194/2004. The conference was devoted to recent advances in Nonsmooth Analysis and Optimizations, ODE, PDE, Control Theory, Stochastic Analysis and was well attended by mathematicians all over the world. There were 40 minutes plenary invited lectures, 20 minutes talks and a poster session. This volume includes 29 selected articles, many of them written by leading specialists in their fields and covering the main topics of the conference. We take this opportunity to express our gratitude to all who have chosen to publish their contributions in this volume as well as to the referees of the submitted papers for their promptitude and high exigence. Furthermore, we thank Ms. Carmen Savin for her excellent secretarial work, as well as Ms. Elena Mocanu for her extremely efficient and skilful assistance in preparation of the camera-ready copy. Finally, we express our warmest thanks to World Scientific for the very pleasant and fruitful cooperation during the publication of this volume.
Ia¸si, December 19, 2006
Ovidiu Cˆarj˘a and Ioan I. Vrabie
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
This page intentionally left blank
icaade
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
vii
ORGANIZING COMMITTEE SERIES EDITORIAL BOARD
ORGANIZING COMMITTEE of the International Conference on Applied Analysis and Differential Equations
O. Cˆarj˘a (Chairman)
—
University ”Al.I. Cuza”, Ia¸si and ”O. Mayer” Mathematics Institute of the Romanian Academy, Ia¸si, Romania
V. Barbu
—
University ”Al.I.Cuza”, Ia¸si and ”O. Mayer” Mathematics Institute of the Romanian Academy, Ia¸si, Romania
M. Durea (Secretary)
—
University ”Al.I. Cuza”, Ia¸si, Romania
M. Necula
—
University ”Al.I. Cuza”, Ia¸si, Romania
A. R˘a¸scanu
—
University ”Al.I. Cuza”, Ia¸si and ”O. Mayer” Mathematics Institute of the Romanian Academy, Ia¸si, Romania
I.I. Vrabie
—
University ”Al.I. Cuza”, Ia¸si and ”O. Mayer” Mathematics Institute of the Romanian Academy, Ia¸si, Romania
C. Z˘alinescu
—
University ”Al.I. Cuza”, Ia¸si and ”O. Mayer” Mathematics Institute of the Romanian Academy, Ia¸si, Romania
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
This page intentionally left blank
icaade
January 18, 2007
9:0
WSPC/Proceedings Trim Size for 9in x 6in
ica
ix
CONTENTS
Preface Organizing Committees A Stability Criterion for Delay Differential Equations with Impulse Effects
v vii
1
J.O. Alzabut On the Use of Korn’s Type Inequalities in the Existence Theory for Cosserat Elastic Surfaces with Voids
11
M. Bˆırsan Time Periodic Viscosity Solutions of Hamilton–Jacobi Equations
21
M. Bostan and G. Namah A Viability Result for Semilinear Reaction-diffusion Systems
31
M. Burlic˘ a and D. Ro¸su Necessary Optimality Conditions for Hyperbolic Discrete Inclusions
45
A. Cernea Controllability of Damped Second-Order Initial Value Problem for a Class of Differential Inclusions with Nonlocal Conditions on Noncompact Intervals
55
D.N. Chalishajar Averaging of Evolution Inclusions in Banach Spaces
69
T. Donchev Influence of Variable Permeability on Vortex Instability of a Horizontal Combined Free and Mixed Convection Flow in a Saturated Porous Medium A.M. Elaiw, F.S. Ibrahim and A.A. Bakr
79
January 18, 2007
x
9:0
WSPC/Proceedings Trim Size for 9in x 6in
ica
Contents
Analyticity of Stable Invariant Manifolds for Ginzburg–Landau Equation
93
A.V. Fursikov Approximate Solutions for Non-linear Autonomous ODEs on the Basis of PWL Approximation Theory
113
A.G. Garcia, S.I. Biagiola, J.L. Figueroa, O.E. Agamennoni and L.S. Castro On the Influence of a Subquadratic Convection Term in Singular Elliptic Problems
127
M. Ghergu and V. R˘ adulescu Existence and Uniqueness Results in the Micropolar Mixture Theory of Porous Media
139
I.-D. Ghiba Approximate Controllability for Linear Stochastic Differential Equations with Control Acting on the Noise
153
D. Goreac Numerical Solutions of Two-point Boundary Value Problems for Ordinary Differential Equations Using Particular Newton Interpolating Series
165
G. Groza and N. Pop On the Integral and Asymptotic Representation of Singular Solutions of Elliptic Boundary Value Problems Near Components of Small Dimensions of Boundary
177
N. Jitara¸su An Existence Result for a Class of Nonlinear Differential Systems
185
R. Luca-Tudorache Well-posedness for a Non-autonomous Model of Fast Diffusion G. Marinoschi
199
January 18, 2007
9:0
WSPC/Proceedings Trim Size for 9in x 6in
ica
Contents
Backward Stochastic Generalized Variational Inequality
xi
217
L. Maticiuc and A. R˘ a¸scanu Trichotomy for Linear Skew-product Semiflows
227
M. Megan, C. Stoica and L. Buliga Feedback Control of Constrained Parabolic Systems in Uncertainty Conditions via Asymmetric Games
237
B.S. Mordukhovich and T.I. Seidman Implicit Parallel Solvers in Computational Electrocardiology
255
M. Munteanu and L.F. Pavarino Fan’s Inequality in the Context of MP -Convexity
267
C.P. Niculescu and I. Rovent¸a Range Condition in Optimization and Optimal Control
275
N.H. Pavel Limits of Solutions to the Initial Boundary Dirichlet Problem for Semilinear Hyperbolic Equation with Small Parameter
281
A. Perjan Well-posedness of the Fixed Point Problem for Multivalued Operators
295
A. Petru¸sel and I.A. Rus Some Remarks on a Nonlinear Semigroup Acting on Positive Measures
307
E. Popa Integral Inclusions in Banach Spaces Using Henstock-Type Integrals
319
B. Satco Good Intermediate-rank Lattice Rules Based on the Weighted Star Discrepancy V. Sinescu and S. Joe
329
January 18, 2007
xii
9:0
WSPC/Proceedings Trim Size for 9in x 6in
ica
Contents
On the Minimum Energy Problem for Linear Systems in Hilbert Spaces
343
A.I. Vieru Author Index
351
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
1
A STABILITY CRITERION FOR DELAY DIFFERENTIAL EQUATIONS WITH IMPULSE EFFECTS J.O. ALZABUT Department of Mathematics and Computer Science C ¸ ankaya University, 06530 Ankara, Turkey E-mail:
[email protected] In this paper, we prove that if a delay differential equation with impulse effects of the form x0 (t) = A(t)x(t) + B(t)x(t − τ ) , t 6= θi , ∆x(θi ) = Ci x(θi ) + Di x(θi−j ), i ∈ N, verifies a Perron condition then its trivial solution is uniformly asymptotically stable. Keywords: Impulse; Delay; Adjoint; Perron; Uniform asymptotic stability.
1. Introduction and Preliminaries Delay differential equations with impulse effects can suitably model various evolutionary processes that exhibit both delay and impulse characteristics. In particular, they provide a natural description of the motion of several real world processes which, on one hand, depends on the processes history that often turns out to be the cause of phenomena substantially affecting the motion and, on other hand, is subject to short time perturbations whose duration is almost negligible. Such processes are often investigated in various fields of science and technology, such as physics, population dynamics, ecology, biological systems, optimal control, etc., see Refs. 1–11 and reference quoted therein. It is well known in the theory of ordinary differential equations (see e.g. Ref. 12 [p. 120]) that if for every continuous function f (t) bounded on [0, ∞), the solution of the equation x0 (t) = A(t)x(t) + f (t), satisfying x(0) = 0 is bounded on [0, ∞), then the trivial solution of the corresponding homogeneous equation
January 8, 2007
2
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
J.O. Alzabut
x0 (t) = A(t)x(t) is uniformly asymptotically stable. This result is referred as Perron theorem Ref. 13. Later, Perron theorem has been extended to delay differential equations Ref. 12 [p. 371]. Indeed, it was shown that if for every continuous function f (t) bounded on [0, ∞), the solution of the equation x0 (t) = A(t)x(t) + B(t)x(t − τ ) + f (t), t > 0 satisfying x(t) = 0 for t ∈ [−τ, 0] is bounded on [0, ∞), then the trivial solution of the equation x0 (t) = A(t)x(t) + B(t)x(t − τ ), is uniformly asymptotically stable. For more related materials, see the papers Refs. 14,15. In this paper, we carry out the above result to a type of linear delay differential equations with impulse effects. Indeed, we consider equation of the form x0 (t) = A(t)x(t) + B(t)x(t − τ ),
t 6= θi ,
∆x(θi ) := x(θi+ ) − x(θi ) = Ci x(θi ) + Di x(θi−j ), i ∈ N,
(1)
and show that its trivial solution is uniformly asymptotically stable under a Perron condition. Our equation differs from the previous ones, see also Refs. 16–19, not only it is more general but also it allows delay terms in the impulse conditions. Such impulse conditions are more natural for delay differential equations. With regard to equation (4) it is assumed that (i) A and B are n×n continuous bounded matrices, τ > 0 is a positive real number; (ii) Ci and Di are n × n bounded matrices, j ∈ N is fixed; (iii) {θi } is an increasing sequence of real numbers with lim θi = ∞. i→∞
We also assume that det(I + Ci ) 6= 0 and that there exist a positive real numbers ρ and ν such that kDi k ≤ ρ and k(I +Ci )−1 k ≤ ρ and θi −θi−j ≤ ν for all i ∈ N. k · k denotes any matrix norm. Definition 1.1. Equation (4) is said to verify Perron condition if for every continuous bounded on [0, ∞) function f (t) and every bounded sequence
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Stability for Delay Differential Equations
3
βi the solution of x0 (t) = A(t)x(t) + B(t)x(t − τ ) + f (t), ∆x(θi ) = Ci x(θi ) + Di x(θi−j ) + βi ,
t 6= θi ,
i ∈ N,
(2)
satisfying x(t) = 0 for t ∈ [−τ, 0] is bounded on t ∈ [0, ∞). By a solution of (6) on an interval J, we mean a function x defined on J such that x is continuous on J except possibly at θi ∈ J for i ∈ N, where x(θi+ ) : lim+ x(t) and x(θi− ) := lim− x(t) exist, x(θi− ) := x(θi ), and that x t→θi
t→θi
satisfies (6) on J. Clearly, if f ≡ 0 and βi = 0 for all i ∈ N then (6) reduces to (4). Let P LC([−τ, 0], Rn ) denote the set of piecewise left continuous functions φ : [−τ, 0] → Rn having a finite number of discontinuity points of the first kind. Under the above conditions, one can easily show that for given σ ≥ 0 and φ ∈ P LC([−τ, 0], Rn ) there is a unique solution x(t) of (6) such that x(t + σ) = φ(t),
t ∈ [−τ, 0].
(3)
2. Preparatory Lemmas The following lemmas, see Ref. 12 for delay differential equations without impulse effects, are essential in proving the main result of this paper. Lemma 4.1 is needed to define an adjoint equation of (4), Lemma 2.2 provides representation of solutions, and Lemma 2.3 is concerned with the boundedness of fundamental matrices of (4). Consider the equation y 0 (t) = −AT (t)y(t) − B T (t + τ )y(t + τ ),
t 6= θi ,
+ T ∆y(θi ) − (I + CiT )−1 CiT y(θi ) − (I + CiT )−1 Di+j y(θi+j ), i ∈ N.
(4)
We claim that equation (9) is an adjoint of (4) with respect to a function resembles the one used by Halanay in Ref. 12 [p. 371]. It turns out that this function has the form Z t+τ y T (s)B(s)x(s − τ )ds < y(t), x(t) >= y T (t)x(t) + t
+
X
y T (θk+ )Dk x(θk−j ),
n(t)≤k
where n(t) = min{i ∈ N : θi ≥ t}.
(5)
January 8, 2007
4
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
J.O. Alzabut
Lemma 2.1. If x(t) is a solution of (4) and y(t) is a solution of (9) then hy(t), x(t)i = c = constant, where h , i is defined by (10). Proof. Let t ∈ (θi , θi+1 ). Then d hy(t), x(t)i = −y T (t)A(t)x(t) − y T (t + τ )B(t + τ )x(t) dt + y T (t + τ )B(t + τ )x(t) − y T (t)B(t)x(t − τ ) + y T (t)A(t)x(t) + y T (t)B(t)x(t − τ ) = 0, and hence hy(t), x(t)i = ci = constant for t ∈ (θi , θi+1 ). We may claim that ci = c for i ∈ N. Indeed, since ci+1 − ci = ∆ hy(t), x(t)i |t=θi , by (10) we have ci+1 − ci = y T (θi+ )x(θi+ ) − y T (θi )x(θi ) X + y T (θk+ )Dk x(θk−j ) n(θi+ )≤k
−
X
y T (θk+ )Dk x(θk−j ).
n(θi )≤k
Since n(θi+ ) = i + 1 and n(θi ) = i, we have ci+1 − ci = y T (θi+ )x(θi+ ) − y T (θi )x(θi ) − y T (θi+ )Di x(θi−j ) + + y T (θi+j )Di+j x(θi ).
Using the impulse conditions in (4) x(θi+ ) = (I + Ci )x(θi ) + Di x(θi−j ) and the impulse conditions in (9) + y T (θi+j )Di+j = y T (θi ) − y T (θi+ ) − y T (θi+ )Ci
we deduce that ci+1 − ci = 0 for all i ∈ N and thus hy(t), x(t)i = c. Remark 2.1. It is easy to verify also that the adjoint of (9) is (4), i.e they are mutually adjoint of each other.
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Stability for Delay Differential Equations
5
Definition 2.1. A matrix solution X(t, α) of (4) satisfying X(α, α) = I and X(t, α) = 0 for t < α is called a fundamental matrix of (4). Definition 2.2. A matrix solution Y (t, α) of (9) satisfying Y (α, α) = I and Y (t, α) = 0 for t > α is said to be a fundamental matrix of (9). Lemma 2.2. Let X(t, α) be a fundamental matrix of (4) and σ ≥ 0 a real number. If x(t) is a solution of (6), then x(t) = X(t, σ)x(σ) Z σ Z t + X(t, α + τ )B(α + τ )x(α)dα + X(t, α)f (α)dα σ−τ σ X X + + X(t, θk+j )Dk+j x(θk ) + X(t, θk+ )βk . (6) n(σ)−j≤k
n(σ)≤k
Proof. Multiplying the differential equation in (6) by the matrix Y T (α, t) and integrating with respect to α from σ to t, we obtain Z t x(t) = Y T (σ, t)x(σ) − Y T (α + τ, t)B(α + τ )x(α)dα σ
Z
Z
t
+
T
t
Y (α, t)B(α)x(α − τ )dα + σ
Y T (α, t)f (α)dα
σ
X
+
h i Y T (θk+ , t)x(θk+ ) − Y T (θk , t)x(θk ) .
n(σ)≤k
Replacing α by α+τ in the second integral and using the impulse conditions in (6) and (9), we have Z σ x(t) = Y T (σ, t)x(σ) + Y T (α + τ, t)B(α + τ )x(α)dα σ−τ
X
+
+ Y T (θk+j , t)Dk+j x(θk )
n(σ)−j≤k
Z
t
+ σ T
Y T (α, t)f (α)dα +
X
Y T (θk+ , t)βk .
(7)
n(σ)≤k
Since X(t, σ) = Y (σ, t), which can be seen by replacing x(t) by the fundamental matrix X(t, σ) in (7) with f ≡ 0 and βi = 0 for all i ∈ N, (7) is the same as (6).
January 8, 2007
6
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
J.O. Alzabut
Corollary 2.1. Let X(t, α) be a fundamental matrix of (4) and Y (t, α) be a fundamental matrix of (9). Then X(t, α) = Y T (α, t). Lemma 2.3. If (4) verifies Perron condition, then kX(t, α)k < M for t ≥ α ≥ 0. Proof. We first claim that there exists a constant d such that Z t X + kX(t, α)kdα + kX(t, θm )k < d for t ≥ 0. 0
(8)
0≤m
Define the space Π = CB × S, where CB is the set of bounded functions f ∈ C([0, ∞), Rn ) and S is the set of bounded sequences β = {βm }, βm ∈ Rn , m ∈ N. The elements are represented by the pair (f, β) supplied by the norm k(f, β)k = sup kf (t)k + sup kβm k. Consider the operator U t∈[0,∞)
m∈N
defined on the Banach space Π by Z t U (f, βm ) = X(t, α)f (α)dα + 0
X
+ X(t, θm )βm .
0≤m
We may use the Banach Steinhaus theorem Ref. 20 by employing similar arguments developed in Ref. 12 to arrive at (8). Now let us consider (9) satisfied by Y (α, t). Integrating both sides from σ to t leads to Z Y T (σ, t) = I +
t
Z Y T (α, t)A(α)dα +
σ
t
Y T (α + τ, t)B(α + τ )dα
σ
−
X
∆Y T (θi , t).
n(σ)≤i
+ Observing that Y T (θi , t) = Y T (θi+ , t)(I + Ci ) + Y T (θi+j , t)Di , we obtain
X n(σ)≤i
It follows that
k∆Y T (θi , t)k ≤ 2ρ
X 0≤i
kY T (θi+ , t)k.
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Stability for Delay Differential Equations
Z
t
kY T (σ, t)k ≤ 1 + 2γ
X
kY T (α, t)kdα + 2ρ
0
7
kY T (θi+ , t)k,
0≤i
where ½ ¾ γ = max sup kA(t)k, sup kB(t)k . t≥0
t≥0
Replacing Y T (σ, t) by X(t, σ) and using inequality (8) result in the desired conclusion. 3. The Main Result Theorem 3.1. If equation (4) verifies Perron condition then its trivial solution is uniformly asymptotically stable. Proof. Let x(t; σ, φ) denote the solution of (4) satisfying (3). From Lemma 2.2, Z
0
x(t; σ, φ) = X(t, σ)φ(0) +
X(t, α + σ + τ )B(α + σ + τ )φ(α)dα −τ
+
X
+ X(t, θk+n(σ)+j )Dk+n(σ)+j φ(θk ).
−j≤k<0
By Lemma 2.3, there exists M > 0 such that kX(t, r)k < M . Hence kx(t; σ, φ)k ≤ M (1 + τ γ + jρ)kφk0 = M1 kφk0 , where M1 = M (1 + τ γ + jρ) and kφk0 =
sup kφ(r)k. r∈[−τ,0]
Thus, the zero solution of (4) is uniformly stable. To complete the proof we need to show that lim x(t; σ, φ) = 0 uniformly with respect to σ and φ.
t→∞
(9)
January 8, 2007
8
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
J.O. Alzabut
For our purpose, let µ ≥ σ. It is clear that x(t) = x(t; σ, φ) satisfies Z µ x(t; σ, φ) = X(t, µ)x(µ; σ, φ) + X(t, α + τ )B(α + τ )x(α; σ, φ)dα µ−τ
+
X
+ X(t, θk+j )Dk+j x(θk ; σ, φ).
n(µ)−j≤k
Integrating both sides from σ to t and then changing the order of integrations and the order of summation and the integral, we have Z
Z
σ
α+τ
(t − σ)x(t; σ, φ) =
X(t, α + τ )B(α + τ )x(α; σ, φ)dµdα σ−τ
Z
σ
t−τ
Z
α+τ
+
X(t, α + τ )B(α + τ )x(α; σ, φ)dµdα σ
Z
α
t
+
X(t, µ)x(µ; σ, φ)dµ σ
+
Z
X
σ
n(σ)−j≤k
+
X
Z
n(σ)≤k
θk+j
θk+j
θk
+ X(t, θk+j )Dk+j x(θk ; σ, φ)dµ
+ X(t, θk+j )Dk+j x(θk ; σ, φ)dµ.
We easily see from above that (t − σ)kx(t; σ, φ)k ≤ γτ 2 M M1 kφk0 + jρνM M1 kφk0 hZ t + M1 max{τ γ, νρ, 1}kφk0 kX(t, s)kds 0
+
X
i kX(t, θr )k .
(10)
0≤r
In view of (8), the right side of (10) is bounded. Hence kx(t; σ, φ)k ≤
M2 kφk0 , t−σ
where M2 is chosen so that M2 < M M1 (γτ 2 + jρν) + M1 max{τ γ2 , νρ, 1}d. Obviously, (9) follows from (11).
(11)
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Stability for Delay Differential Equations
9
References 1. S.H. Saker and J.O. Alzabut, Existence of periodic solutions, global attractivity and oscillation of impulsive delay population model, Nonlinear Anal. Real World Appl., to appear. 2. S.H. Saker and J.O. Alzabut, Periodic solutions, global attractivity and oscillation of impulsive delay host macroparasite model, Math. Comput. Modelling, to appear. 3. J. Yan, A. Zhao, L. Peng, Oscillation of impulsive delay differential equations and applications to population dynamics, ANZIAM J., (46) 4 (2005), 545– 554. 4. W. Zhang and M. Fan, Periodicity in a generalized ecological competition system governed by impulsive differential equations with delays, Math. Comput. Modelling, 39 (2004), 479–493. 5. S. Tang and L. Chen, Global attractivity in a ”Food-Limited” Population Model with Impulsive Effect, J. Math. Anal. Appl., 292 (2004), 211–221. 6. X. Liu and G. Ballinger, Boundedness for impulsive delay differential equations and applications to population growth models, Nonlinear Anal., (53) 7-8 (2003), 1041–1062. 7. G. Ballinger and X. Liu, Practical Stability of Impulsive Delay Differential Equations and Applications to Control Problems, Optimization Methods and Applications, 3–21, Appl. Optim., 52, (Kluwer Acad. Publ., Dordrecht, 2001). 8. J.J. Nieto, Impulsive resonance periodic problems of first order, Appl. Math. Lett., 15 (2002), 489–493. 9. M. Akhmetov and R. Sejilova, The control of the boundary value problem for linear impulsive integro-differential systems, J. Math. Anal. Appl., (236) 2 (1999), 312–326. 10. J. Yan, A. Zhao and W. Yan, Existence and global attractivity of periodic solution for an impulsive delay differential equation with allee effect, J. Math. Anal. Appl., (309) 2 (2005), 489–504. 11. J.R. Yan, Existence and Global Attractivity of positive periodic solution for an impulsive Lasota-Wazewska Model, J. Math. Anal. Appl., 279 (2003), 111–120. 12. A. Halanay, Differential Equations: Stability, Oscillation, Time Lags, (Academic Press Inc., 1966). 13. O. Perron, Die Stabilitatsfrage bei Differentialgleichungen, Math. Z., 32 (1930), 703–728. 14. V.A. Tyshkevich, A perturbations-accumulation problem for linear differential equation with time lag, Differential Equations, 14 (1978), 177–186. 15. N.V. Azbelev, L.M. Berezanskii, P.M. Simonov and A.V. Chistyakov, Stability of linear systems with time lag, Differential Equations, 23 (1987), 493–500. 16. G. Ballinger and X. Liu, Existence and Uniqueness Results for Impulsive Delay Differential Equations, Dyn. Contin. Discrete Impuls. Syst., 5 (1999), 579–591.
January 8, 2007
10
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
J.O. Alzabut
17. W. Li and H. Huo, Existence and global attractivity of positive periodic solutions of functional differential equations with impulses, Nonlinear Anal., 59 (2004), 857–877. 18. X. Li, X. Lin, D. Jiang and X. Zhang, Existence and multiplicity of positive periodic solutions to functional differential equations with impulse effect, Nonlinear Anal., 62 (2004), 683–701. 19. K. Gopalsamy and B.G. Zhang, On the delay differential equations with impulses, J. Math. Anal. Appl., 139 (1989), 110–122. 20. E. Kreyszig, Introductory Functional Analysis with Applications, (Wiley, 1989).
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
11
ON THE USE OF KORN’S TYPE INEQUALITIES IN THE EXISTENCE THEORY FOR COSSERAT ELASTIC SURFACES WITH VOIDS M. BˆIRSAN Faculty of Mathematics, “A.I. Cuza” University of Ia¸si, Romania E-mail:
[email protected] We study the differential equations which govern the linear deformation of thin elastic shells made from a porous material. In our approach, we employ the theory of Cosserat elastic surfaces with voids. On the basis of inequalities of Korn’s type for Cosserat surfaces, we prove existence and uniqueness results for the solution of the boundary-value problems, in the equilibrium theory. For the dynamic equations, we investigate the boundary-initial-value problems for porous Cosserat shells using the semigroup of linear operators theory and we establish the existence, uniqueness and continuous dependence of solution. Keywords: Elastic shell; Cosserat surface; Material with voids; Existence; Uniqueness.
1. Introduction This paper is concerned with the linear theory of Cosserat elastic shells with voids. In this context, we employ the inequalities of Korn’s type to study the existence and uniqueness of solution to the equations which govern the deformation of shells. The inequalities of Korn are well-known in the three-dimensional theory of elasticity and their usefulness for the study of the field equations is well-established (see e.g. Refs. 1,2). In the classical linear shell theory, the inequalities of Korn’s type have been presented by Ciarlet in his treatise Ref. 3 (see also Ref. 4). In our approach of the problem, we consider thin elastic shells modeled as Cosserat surfaces. The foundations of the theory of Cosserat surfaces have been discussed in the monograph of Naghdi5 . The basic idea of the Cosserat theory for shells is to model thin bodies by means of a twodimensional continuum (i.e., a surface) endowed with a deformable vector (called director) assigned to each point of the surface. A modern approach
January 8, 2007
12
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
M. Bˆırsan
of this theory, together with some applications, are presented in the book of Rubin Ref. 6. The inequalities of Korn’s type within the context of Cosserat theory of shells have been established in Ref. 7. In the present work, we deal with shells made from a porous elastic material. To describe the porosity of the material, we employ the NunziatoCowin theory for media with voids Refs. 8,9. This theory is based on the assumption that the bulk mass density ρ∗ of the porous elastic solid can be decomposed as the product of two fields: the matrix material mass density γ ∗ and the volume fraction field ν ∗ , such that ρ∗ = γ ∗ ν ∗ (0 < ν ∗ ≤ 1). In this way, an additional degree of kinematical freedom (namely, the volume fraction field) is introduced. The theory of porous elastic shells modeled as Cosserat surfaces with voids has been introduced in Ref. 10. In what follows, we investigate the equations for porous Cosserat shells established in Ref. 10. In Section 2, we recall the geometrical relations, constitutive assumptions and balance equations which govern the linear deformation of anisotropic and inhomogeneous shells. In Section 3, we restrict our attention to the equilibrium theory and show that the variational problems associated to our boundary-value problems can be treated using the inequalities of Korn’s type for Cosserat surfaces. In Section 4, we consider the dynamic theory and prove existence, uniqueness and continuous dependence results for the boundary-initial-value problems associated to the deformation of porous Cosserat shells. To this aim, we write the boundaryinitial-value problem in the form of an abstract Cauchy problem in a Hilbert space and we employ the theory of semigroup of linear operators. Once again, the Korn’s type inequality for Cosserat surfaces proves useful to establish the existence of solution. 2. Equations of the Linear Theory for Porous Cosserat Shells The theory of Cosserat elastic shells with voids has been established in Ref. 10. Following the approach of the Nunziato-Cowin theory for elastic media with voids, the porosity of the material is modeled using two volume fraction fields ν and χ, where ν is the average volume fraction through the thickness of the shell and χ is the average volume fraction gradient through the shell’s thickness (see Ref. 10). Thus, the deformation of a porous Cosserat shell is described by the functions ¡ ¢ ¡ ¢ r = r θ1 , θ2 , t , d = d θ1 , θ2 , t , (1) ¯ ν = ν(θ1 , θ2 , t), χ = χ(θ1 , θ2 , t), (θ1 , θ2 ) ∈ Σ, t∈T.
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Existence Theory for Cosserat Elastic Surfaces with Voids
13
Here, (θ1 , θ2 ) is a curvilinear material coordinate system on the reference surface, r and d are the position vector and the deformable director assigned to every point of the Cosserat surface, T = [0, ∞) is the time interval and Σ is a domain in R2 (i.e. an open, bounded and connected subset of R2 ) with a Lipschitz-continuous boundary Γ = ∂Σ. We employ the usual notation convention pertaining to summation over repeated indices. Also, the Greek indices and superscripts take the values {1, 2}, while the Latin indices and superscripts take the values {1, 2, 3}. Boldface letters denote tensor-valued or matrix-valued functions and their associated function spaces. A superposed dot stands for the material time derivative (holding θα fixed) and a comma preceding a subscript designates partial differentiation with respect to the corresponding coordinate. Let us denote by R, D, ν0 and χ0 the values of the functions (1) written for the reference configuration of the shell (ν0 and θ0 are assumed to be ¯ be the reference surface, which coincides with the constant). Let S = R(Σ) initial configuration. Thus, we have R = R(θα ) = r (θα , 0) ,
D = D(θα ) = d (θα , 0) ,
¯ (2) (θ1 , θ2 ) ∈ Σ.
¯ R is injective and Assume that the mappings R and D are of class C 2 (Σ), D is nowhere tangent to S. We introduce the notations Aα =
∂R , ∂θα
Aαβ = Aα · Aβ , Ai · Aj = δji ,
A3 =
A1 × A2 , |A1 × A2 |
Bαβ = A3 · Aβ,α , Aαβ = Aα · Aβ ,
A = det(Aαβ ),
(3)
Bαβ = Aβγ Bαγ ,
where Aα are the covariant base vectors (assumed to be linearly independent), A3 is the unit normal to the surface S, Aαβ and Bαβ are the first and second fundamental forms of S and δij is the Kronecker symbol. In the linear theory of porous Cosserat shells, we consider the infinitesimal displacement vectors u, δ and the infinitesimal changes in volume fraction fields ϕ, ψ given by u = r − R = ui Ai = ui Ai , δ = d − D = δi Ai = δ i Ai , ϕ = ν − ν0 , ψ = χ − χ0 .
(4)
For the case of shells with uniform thickness in the reference configuration (characterized by D = A3 ), the linear strain measures are ¢ 1¡ uα|β + uβ|α − Bαβ u3 , γα = δα + u3,α + Bαβ uβ , eαβ = 2 (5) γ3 = δ3 , ρβα = δβ|α − Bαγ uγ|β + Bαγ Bβγ u3 , ρ3α = δ3,α ,
January 8, 2007
18:38
14
WSPC - Proceedings Trim Size: 9in x 6in
icaade
M. Bˆırsan
where a subscript vertical bar stands for covariant differentiation with respect to the metric tensor Aαβ . The contact force N , the contact director force M and the equilibrated stresses h, H (acting per unit length of curves c in S) satisfy the relations ¡ ¢ ¡ ¢ N = N αβ Aβ + V α A3 να , M = M αi Ai να , (6) h = hα να , H = H α να . Here, ν = να Aα is the unit (outward) normal to c tangent to the surface S. In this work, we consider anisotropic and inhomogeneous Cosserat elastic shells with voids. The constitutive equations are
N 0αβ g=
W = W (eαβ , γi , ρiα , ϕ, ψ, ϕ,γ , ψ,γ ) , µ ¶ 1 ∂W ∂W ∂W ∂W = + , Vi = , M αi = , 2 ∂eαβ ∂eβα ∂γi ∂ρiα ∂W , ∂ϕ
hα =
∂W , ∂ϕ,α
G=
∂W , ∂ψ
Hα =
∂W , ∂ψ,α
(7)
(8)
where the tensor N 0αβ is given by the expression N 0αβ = N αβ + Bγβ M γα ,
(9)
while g and G denote the internal equilibrated body forces. The function W represents the strain energy density per unit area of S and it is a quadratic form of its arguments. The constitutive coefficients are bounded measurable functions of (θµ ) which belong to H 1 (Σ). We assume that the quadratic form W is positive definite, i.e. there ¯ we have exists a constant c1 > 0 such that, for all (θµ ) ∈ Σ, W (eαβ , γi , ρiα , ϕ, ψ, ϕ,γ , ψ,γ ) ≥ ¡ ¢ (10) ≥ c1 eαβ eαβ + γi γi + ρiα ρiα + ϕ2 + ψ 2 + ϕ,γ ϕ,γ + ψ,γ ψ,γ . The equations of motion for Cosserat shells are N αβ |α − Bαβ V α + ρ0 f β = ρ0 u ¨β ,
V α |α + Bαβ N αβ + ρ0 f 3 = ρ0 u ¨3 ,
M αi |α − V i + ρ0 li = ρ0 α ¯ δ¨i ,
(11)
and the equations of equilibrated force can be written as hα |α − g + ρ0 p = ρ0 κ1 ϕ¨ ,
H α |α − G + ρ0 P = ρ0 κ2 ψ¨ .
(12)
Here, ρ0 is the mass density in the reference configuration, while α ¯ , κ1 and κ2 represent inertia coefficients, which are positive prescribed functions ¯ Also, f i and li designate the components of the assigned of class C 1 (Σ). force and assigned director force vectors, and p, P stand for the assigned equilibrated body forces.
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Existence Theory for Cosserat Elastic Surfaces with Voids
15
3. Boundary-value Problems of the Equilibrium Theory For the static theory, the functions defined previously do not depend on the time t. Thus, the equations of equilibrium are expressed by N αβ |α − Bαβ V α + ρ0 f β = 0,
V α |α + Bαβ N αβ + ρ0 f 3 = 0,
M αi |α − V i + ρ0 li = 0, h
α
|α
− g + ρ0 p = 0,
H
α
|α
(13)
− G + ρ0 P = 0.
Let Γ0 be a measurable subset of Γ = ∂Σ such that length(Γ0 )> 0, and let Γ1 = Γ − Γ0 . For the sake of simplicity, we consider the following homogeneous boundary conditions u = δ = 0, ϕ = ψ = 0 on
Γ0 ,
N = M = 0, h = H = 0 on
Γ1 .
(14)
Thus, the boundary-value problem consists in the equilibrium equations (13), the geometrical relations (5), the constitutive equations (8) and the boundary conditions (14). We denote by k · km the usual norm in the Sobolev space H m (Σ) and by | · |0 the usual norm in L2 (Σ). Let V (Σ) be the subspace of H 1 (Σ) given by © ª V (Σ) = y = (ui , δi , ϕ, ψ) ∈ H 1 (Σ); ui = δi = ϕ = ψ = 0 on Γ0 . Assume that f i , li , p, P ∈ L2 (Σ). We define the (symmetric) bilinear form B on V (Σ) × V (Σ) and the linear functional F on V (Σ) by Z £ 0αβ B(y, z) = N (z)eαβ (y) + V i (z)γi (y) + M αi (z)ρiα (y) Σ i√ A dθ1 dθ2 , (15) + g(y)ϕˆ + hα (y)ϕˆ,α + G(y)ψˆ + H α (y)ψˆ,α Z ¡ ¢√ F (y) = ρ0 f i ui + li δi + pϕ + P ψ A dθ1 dθ2 , Σ
ˆ ∈ V (Σ). for every y = (ui , δi , ϕ, ψ), z = (ˆ ui , δˆi , ϕ, ˆ ψ) Using the classical procedure, we call weak solution of the boundaryˆ ∈ V (Σ) such that ˆ ψ) value problem a function z = (ˆ ui , δˆi , ϕ, B(y, z) = F (y),
∀ y = (ui , δi , ϕ, ψ) ∈ V (Σ).
(16)
We observe that all the hypotheses of the Lax-Milgram lemma are satisfied for the variational problem (16), provided we prove that B is V (Σ)elliptic, i.e. there exists a constant c0 > 0 such that B(y, y) ≥ c0 kyk21 ,
∀ y ∈ V (Σ).
(17)
January 8, 2007
16
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
M. Bˆırsan
By the definition (15), we deduce that Z √ B(y, y) = 2 W (eαβ (y), γi (y), ρiα (y), ϕ, ψ, ϕ,γ , ψ,γ ) A dθ1 dθ2 , (18) Σ
for any y = (ui , δi , ϕ, ψ) ∈ V (Σ). Using (18) and the inequality (10), we derive that there exists a constant c2 > 0 such that Z B(y, y) ≥ c2 [eαβ (y)eαβ (y) + γi (y)γi (y) + ρiα (y)ρiα (y) (19) Σ ¤ 1 2 2 2 + ϕ + ψ + ϕ,γ ϕ,γ + ψ,γ ψ,γ dθ dθ , ∀ y ∈ V (Σ). In order to show the validity of the inequality (17), we need to prove the following result, which establishes an inequality of Korn’s type “without boundary conditions”. ¯ Theorem 3.1. Assume that the injective mapping R is of class C 3 (Σ). 1 For any v = (ui , δi ) ∈ H (Σ), let eαβ (v), γi (v) and ρiα (v) be the linear strain measures. Then, there exists a constant c3 = c3 (Σ, R) > 0 such that Z [ui ui + δi δi + eαβ (v)eαβ (v)+γi (v)γi (v)+ρiα (v)ρiα (v)] dθ1 dθ2 ≥ (20) Σ ∀ v = (ui , δi ) ∈ H 1 (Σ). ≥ c3 kvk21 , The proof of Theorem 3.1, which is presented in Ref. 7, follows the same lines as the proof of Korn’s inequality in three-dimensional elasticity (see e.g., Ref. 2). By virtue of Theorem 3.1 and the infinitesimal rigid displacement lemma for Cosserat surfaces (see Ref. 7), we obtain the inequality of Korn’s type “with boundary conditions”, in the next theorem. Theorem 3.2. Assume that the hypotheses of Theorem 3.1 are satisfied. Then, there exists a constant c4 = c4 (Σ, Γ0 , R) > 0 such that Z [eαβ (v)eαβ (v) + γi (v)γi (y) + ρiα (v)ρiα (v)] dθ1 dθ2 ≥ c4 kvk21 , (21) Σ
for all v = (ui , δi ) ∈ H 1 (Σ) with ui = δi = 0 on Γ0 . Theorem 1.2 is proved in Ref. 7, using the same arguments as in the case of the Korn’s type inequality on a general surface (see Refs. 3,4). We are now in a position to establish the inequality (17). Indeed, if we substitute the relation (21) into the inequality (19), then we obtain that (17) holds. Hence, the bilinear form B is V (Σ)-elliptic and we can apply the Lax-Milgram lemma to deduce the following result.
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Existence Theory for Cosserat Elastic Surfaces with Voids
17
Theorem 3.3. Assume that the hypotheses of Theorem 3.1 are satisfied. Then, there exists a unique solution z ∈ V (Σ) to the variational problem (16). The solution z can be characterized as the minimizer on the space V (Σ) of the following functional Z √ J(y) = W(eαβ (y), γi (y), ρiα (y), ϕ, ψ, ϕ,γ , ψ,γ ) A dθ1 dθ2 ZΣ ¡ ¢√ − ρ0 f i ui + li δi + pϕ + P ψ A dθ1 dθ2 , y = (ui , δi , ϕ, ψ), Σ
where W is the strain energy density of the Cosserat shell and f i , li , p and P are the assigned body forces. This theorem states the existence and uniqueness of weak solution to the boundary-value problem for the static deformation of porous shells. 4. Boundary-initial-value Problems in the Dynamic Theory For the dynamic problems, we shall employ the theory of semigroup of linear operators to establish existence, uniqueness and continuous dependence results for Cosserat shells with voids. Although more general types of boundary conditions could be considered, we restrict our attention to the following boundary conditions u = δ = 0,
ϕ=ψ=0
on
Γ×T.
(22)
The initial conditions are given by u(θα , 0) = u0 (θα ), ˙ α , 0) = w0 (θα ), δ(θ ψ(θα , 0) = ψ 0 (θα ),
˙ α , 0) = v 0 (θα ), u(θ ϕ(θα , 0) = ϕ0 (θα ), ˙ α , 0) = µ0 (θα ), ψ(θ
δ(θα , 0) = δ 0 (θα ), ϕ(θ ˙ α , 0) = λ0 (θα ), on Σ.
(23)
where u0 , v 0 , δ 0 , w0 , ϕ0 , λ0 , ψ 0 and µ0 are prescribed functions. We consider the boundary-initial-value problem consisting in the equations of motion (11), the equations of equilibrated force (12), the geometrical relations (5), the constitutive equations (8), the boundary conditions © (22) and the initial conditions (23). Let Z be the Banach space ª Z = U = (ui , vi , δi , wi , ϕ, λ, ψ, µ); ui , δi , ϕ, ψ ∈ H01 (Σ), vi , wi , λ, µ ∈ L2 (Σ) endowed with the usual (product) norm k · kH given by kU k2H =
3 X ¡
¢ kui k21 + |vi |20 + kδi k21 + |wi |20 +kϕk21 +|λ|20 +kψk21 +|µ|20 . (24)
i=1
Let us define on Z the scalar product
January 8, 2007
18
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
M. Bˆırsan
hU , V iZ =
1 2
Z
£ ¤√ 1 ˆ + κ2 µˆ ρ0 v i vˆi + α ¯ wi w ˆi + κ1 λλ µ A dθ1 dθ2 + B(x, z), 2 Σ
ˆ ψ, ˆ µ where U = (ui , vi , δi , wi , ϕ, λ, ψ, µ), V = (ˆ ui , vˆi , δˆi , w ˆi , ϕ, ˆ λ, ˆ) and x = ˆ ˆ (ui , δi , ϕ, ψ), z = (ˆ ui , δi , ϕ, ˆ ψ). By virtue of the inequalities of Korn’s type for Cosserat surfaces (see Section 3), the norm k · kZ induced by the scalar product is equivalent to the norm k · kH on Z, and hence (Z, h· , ·iZ ) is a Hilbert space. We define the linear operator A : D(A) ⊂ Z → Z by AU = (vi , Bi U , wi , Ci U , λ, DU , µ, EU ) ,
(25)
for every U = (ui , vi , δi , wi , ϕ, λ, ψ, µ) ∈ D(A), where ³ ´ ¢ 1 1 ¡ α V |α +Bαβ N αβ (x), Bα U = Aαγ N βγ |β −Bβγ V β (x), B3 U = ρ0 ρ0 ¡ βγ ¢ ¢ 1 1 ¡ α3 Aαγ M |β − V γ (x), C3 U = M |α − V 3 (x), (26) Cα U = ρ0 α ¯ ρ0 α ¯ ¢ ¢ 1 ¡ α 1 ¡ α h |α − g (x), H |α − G (x) DU = EU = ρ0 κ1 ρ0 κ2 and x = (ui , δi , ϕ, ψ). The domain D(A) of the operator A is defined by D(A) = {U ∈ Z;
AU ∈ Z} .
(27)
Then, the boundary-initial-value problem for Cosserat shells can be written in the form of the following abstract Cauchy problem in the Hilbert space Z: dU = AU (t) + F (t), dt where
U (0) = U 0 ,
³ li p P ´ fi , 0, , 0, , F = 0, 0, 0, , 0, 0, 0, ρ0 ρ0 α ¯ ρ0 κ1 ρ0 κ2 ¡ ¢ U 0 = u0i , vi0 , δi0 , wi0 , ϕ0 , λ0 , ψ 0 , µ0 .
(28)
(29)
Some properties of the operator A are stated by the following theorem. Theorem 4.1. Let A : D(A) ⊂ Z → Z be the operator defined by the relations (25)–(27). Then: (i) D(A) is dense in Z; (ii) The operator A satisfies the equality hAU , U iZ = 0,
∀ U ∈ D(A);
(30)
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Existence Theory for Cosserat Elastic Surfaces with Voids
19
(iii) A verifies the condition Range(I − A) = Z ,
(31)
where I is the identity operator; (iv) The operator A is the infinitesimal generator of a semigroup of contractions in the Hilbert space Z. Proof. (i) We notice that © ª U ∈ Z; ui , δi , ϕ, ψ ∈ H01 (Σ) ∩ H 2 (Σ), vi , wi , λ, µ ∈ H01 (Σ) ⊂ D(A) and hence, D(A) is dense in Z. (ii) In view of the geometrical relations (5) and the equation (9), we obtain by a straightforward calculation that Z h ¡ ¢ 2hAU , U iZ = vα N βα |β +v3 V α |α +wi M αi |α +λhα |α +µH α |α Σ (32) ¡ ¢ i√ βα A dθ1 dθ2 , + vα|β N + v3|α V α + wi|α M αi + λ|α hα + µ|α H α for any U = (ui , vi , δi , wi , ϕ, λ, ψ, µ) ∈ D(A). Taking into account the boundary conditions (22), from (32) we deduce the relation (30). (iii) In order to prove that the range condition (31) holds true, we employ the same arguments as in the proof of Lemma 3 from Ref. 7. (iv) By virtue of (i)–(iii), we can apply the Lumer-Phillips theorem (see e.g. Ref. 11, page 14) to obtain the statement of the theorem. ¤ The main result asserts the existence and uniqueness of solution. Theorem 4.2. Let t0 ∈ T and assume that F (t) ∈ C 1 ([0, t0 ], L2 (Σ)) and U 0 ∈ D(A). Then, there exists a unique solution U (t) ∈ C 1 ([0, t0 ], Z) ∩ C 0 ([0, t0 ], D(A)) to the problem (28). The solution U (t) satisfies Z t kU (t)kZ ≤ kU 0 kZ + kF (s)kZ ds, t ∈ [0, t0 ]. (33) 0
Proof. Let {S(t); t ≥ 0} be the semigroup of contractions generated by the operator A. In view of Theorem 2.2, we can apply the general results of the semigroup of linear operators theory (see e.g. Ref. 12, Sect. 8.1) to deduce the existence of a unique solution U (t) to the problem (28), given by Z t U (t) = S(t)U 0 + S(t − s)F (s) ds, t ∈ [0, t0 ]. 0
Hence, we derive the inequality (33).
¤
January 8, 2007
20
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
M. Bˆırsan
We mention that the estimate (33) expresses the continuous dependence of the solution upon the initial data {u0 , v 0 , δ 0 , w0 , ϕ0 , λ0 , ψ 0 , µ0 } and the external body loads {f i , li , p, P }.
References 1. G. Duvaut & J.L. Lions, Inequalities in Mechanics and Physics, (SpringerVerlag, Berlin, 1976). 2. P.G. Ciarlet, Mathematical Elasticity. Vol. I: Three-dimensional Elasticity, (North-Holland, Amsterdam, 1988). 3. P.G. Ciarlet, Mathematical Elasticity. Vol. III: Theory of Shells, (NorthHolland, Amsterdam, 2000). 4. P.G. Ciarlet, Introduction to Linear Shell Theory, Ser. Applied Mathematics no. 1, (Gauthier-Villars, 1998). 5. P.M. Naghdi, The Theory of Shells and Plates, Handbuch der Physik, Vol. VI a/2, (Springer-Verlag, Berlin Heidelberg New York, 1972), 425–640. 6. M.B. Rubin, Cosserat Theories: Shells, Rods, and Points, (Kluwer Academic Publishers, Dordrecht, 2000). 7. M. Bˆırsan, Inequalities of Korn’s type and existence results in the theory of Cosserat elastic shells, submitted. 8. J.W. Nunziato & S.C. Cowin, A nonlinear theory of elastic materials with voids, Arch. Rational Mech. Anal. 72 (1979), 175–201. 9. S.C. Cowin & J.W. Nunziato, Linear elastic materials with voids, J. Elasticity 13 (1983), 125–147. 10. M. Bˆırsan, On the theory of elastic shells made from a material with voids, Int. J. Solids Struct. 43 (2006), 3106–3123. 11. A. Pazy, Semigroups of Linear Operators and Applications to Partial Differential Equations, Ser. Applied Mathematical Sciences no. 44, (SpringerVerlag, New York, 1983). 12. I.I. Vrabie, C0 -Semigroups and Applications, Ser. Mathematics Studies no. 191, (North-Holland, Elsevier, Amsterdam, 2003).
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
21
TIME PERIODIC VISCOSITY SOLUTIONS OF HAMILTON-JACOBI EQUATIONS MIHAI BOSTAN and GAWTUM NAMAH Laboratoire de Math´ ematiques de Besancon, UMR CNRS 6623, Universit´ e de Franche-Comt´ e, 16 route de Gray, 25030 Besancon Cedex, France, Email:
[email protected], Email:
[email protected] We analyze the existence and uniqueness of time periodic viscosity solutions. We prove that the existence for time periodic problems can be reduced to the existence for stationary problems, obtained by averaging the source term. We investigate also the asymptotic behaviour of time periodic solutions for large frequencies. Keywords: Hamilton-Jacobi equations; Time periodic viscosity solutions.
1. Introduction We are mainly interested in time periodic solutions of first order HamiltonJacobi equations of the form ∂t u + H(x, u, Du) = f (t), (x, t) ∈ IRN × IR,
(1)
where the hamiltonian H and f are continuous functions, f being T periodic in t. We perform our study in the framework of viscosity solutions introduced by Crandall and Lions, cf. Refs. 1–4. The usual hypotheses on the hamiltonian H are ∀ R > 0, ∃γR > 0 : H(x, u, p) − H(x, v, p) ≥ γR (u − v),
(2)
for all x ∈ IRN , −R ≤ v ≤ u ≤ R, p ∈ IRN ; ∀R > 0, ∃mR : |H(x, u, p) − H(y, u, p)| ≤ mR ( |x − y| · (1 + |p|) ), N
(3)
N
for all x, y ∈ IR , −R ≤ u ≤ R, p ∈ IR , where lim mR (z) = 0 ; z→0
∀R > 0, lim H(x, u, p) = ∞, uniformly for (x, u) ∈ IRN × [−R, R] ; (4) |p|→∞
January 8, 2007
22
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
M. Bostan & G. Namah
∀ R > 0, H is uniformly continuous on IRN × [−R, R] × B R ;
(5)
∃M > 0 : H(x, −M, 0) ≤ f (t) ≤ H(x, M, 0), ∀ x ∈ IRN , t ∈ IR.
(6)
The hypotheses (2) (with γR ∈ IR, ∀R > 0), (3), (5), (6) ensure existence and uniqueness results for the Cauchy problem ( ∂t u + H(x, u, Du) = f (t), (x, t) ∈ IRN ×]0, +∞[, (7) u(x, 0) = u0 (x), x ∈ IRN . The coercivity condition (4) guarantees the Lipschitz regularity of the solution. The condition (2) is crucial for the uniqueness result. A much more difficult situation is those of hamiltonians which are just nondecreasing with respect to u H(x, u, p) − H(x, v, p) ≥ 0, ∀x ∈ IRN , v ≤ u, p ∈ IRN .
(8)
The key point is to consider also the stationary averaged problem Z 1 T f (t) dt, x ∈ IRN , H(x, U, DU ) = hf i := T 0
(9)
and to observe that (1) has time periodic viscosity solutions iff (9) has viscosity solutions. Indeed, let us consider the ode x0 (t) + g(x(t)) = f (t), t ∈ IR,
(10)
where f, g : IR → IR are continuous functions. We have the following result (see Ref. 5) Proposition 1.1. Assume that f : IR → IR is continuous, T periodic and g : IR → IR is continuous, nondecreasing. Then (10) admits a T periodic (classical) solution iff there exists x0 which solves g(x) = hf i. A similar result holds for evolution equations. We can prove, cf. Ref. 5 Proposition 1.2. Assume that A : D(A) ⊂ H → H is a linear, maximal monotone and symmetric operator on a Hilbert space H and f : IR → H is a T periodic function. Then there is a periodic solution of x0 (t) + Ax(t) = f (t), t ∈ IR, iff hf i ∈ Range (A).
(11)
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Time Periodic Viscosity Solutions of Hamilton-Jacobi Equations
23
Motivated by the above propositions, we expect that a similar result holds for Hamilton-Jacobi equations Theorem 1.1. Let H = H(x, z, p) be a hamiltonian verifying (8), (4), (5) and sup{|H(x, 0, 0)| : x ∈ IRN } < +∞, f ∈ C(IR) be a continuous time periodic function. Then there is a bounded Lipschitz time periodic viscosity solution of (1) iff there is a bounded continuous viscosity solution of (9). Another interesting problem is the asymptotic behaviour of time periodic viscosity solutions for high frequencies. For example, in the case of (10), let us introduce fn (t) = f (nt), ∀t ∈ IR, n ≥ 1, which is Tn periodic and has the same average as f . Suppose that hf i ∈ g(IR) and let xn be a Tn periodic solution of x0n (t) + g(xn (t)) = fn (t), t ∈ IR, such that supn kxn k∞ < +∞. We inquire about the convergence of (xn )n . Consider the change of variable yn (t) = xn ( nt ). The functions yn are T periodic and solves n · yn0 (t) + g(yn (t)) = f (t), t ∈ IR, n ≥ 1. can guess that RWe R T (yn )n converges uniformly to a constant y0 and since T g(y (t)) dt = f (t) dt, ∀ n ≥ 1 we deduce that g(y0 ) = hf i. We obtain n 0 0 that (xn )n converges towards a solution of g(x) = hf i. The same result holds in the setting of (1), (9) and we show that the rate of convergence is in O(1/n). 2. Preliminaries Let us recall the standard comparison result for semi continuous viscosity sub/supersolutions (see Ref. 6). Proposition 2.1. Let u and v be bounded u.s.c. subsolution of ∂t u+H(x, u, Du) = f (x, t) in IRN ×]0, T [, resp. l.s.c. supersolution of ∂t v + H(x, v, Dv) = g(x, t) in IRN ×]0, T [ where f, g ∈ BU C(IRN × [0, T ]). We assume that (2), (3), (5) hold (with γR ∈ IR not necessarily positive), lim (u(x, t)−u(x, 0))+ = lim (v(x, t)−v(x, 0))− = 0,
t&0
t&0
uniformly for x∈IRN ,
(12)
(here (·)± denotes the positive/negative part a± = max(±a, 0), ∀ a ∈ IR) and u(·, 0) ∈ BU C(IRN ) or v(·, 0) ∈ BU C(IRN ).
(13)
January 8, 2007
18:38
24
WSPC - Proceedings Trim Size: 9in x 6in
icaade
M. Bostan & G. Namah
Then we have for all t ∈ [0, T ] eγt k(u(·, t) − v(·, t))+ kL∞ (IRN ) ≤ k(u(·, 0) − v(·, 0))+ kL∞ (IRN ) (14) Z t + eγs k(f (·, s) − g(·, s))+ kL∞ (IRN ) ds, 0
³ where γ = γR0 , R0 = max
sup
u, −
´ v . Moreover, the hypothe-
inf
IRN ×[0,T ] N
IRN ×[0,T ] 1,∞
(IR ×]0, T [) or v ∈ W 1,∞ (IRN ×]0, T [).
sis (3) can be replaced by u ∈ W
Actually the above version is not enough for our purposes, but we can establish the following slightly improved comparison result Proposition 2.2. Under the hypotheses of Proposition 2.1 (with γR ≥ 0, ∀ R > 0) we have for all t ∈ [0, T ] sup (u(x, t) − v(x, t)) ≤ e−γt sup (u(x, 0) − v(x, 0))+
x∈IRN
x∈IRN Z t
+ sup 0≤s≤t
sup (f (x, σ) − g(x, σ)) dσ,
³ where γ = γR0 , R0 = max
sup IRN ×[0,T ]
(15)
s x∈IRN
u, −
inf
IRN ×[0,T ]
´ v . If the hypotheses (12),
(13) are not verified, we have Z sup (u(x, t) − v(x, t)) ≤ 2R0 · e−γt + sup
sup (f (x, σ) − g(x, σ)) dσ.
0≤s≤t
x∈IRN
t s x∈IRN
Moreover, the hypothesis (3) can be replaced by u ∈ W 1,∞ (IRN ×]0, T [) or v ∈ W 1,∞ (IRN ×]0, T [). Remark 2.1. The main difference between (14) and (15) is that in the right hand side of (15) we have now sup(f (·, σ) − g(·, σ)) and not sup(f (·, σ) − g(·, σ))+ .
IRN
IRN
Proof. We give here a formal proof. We assume that for all t ∈ [0, T ] there is z(t) ∈ IRN such that M (t) := sup (u(x, t) − v(x, t)) = u(z(t), t) − x∈IRN
v(z(t), t). Moreover we suppose that the functions u, v, z are smooth. Since Du(z(t), t) = Dv(z(t), t) =: p(t), ∀t ∈ [0, T ] we have d (u − v)(z(t), t) = ∂t u(z(t), t) − ∂t v(z(t), t). dt
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Time Periodic Viscosity Solutions of Hamilton-Jacobi Equations
25
By using the viscosity equations we have for all t ∈ [0, T ] d {(u−v)(z(t), t)}+H(z(t), u(z(t), t), p(t))−H(z(t), v(z(t), t), p(t)) ≤ h(t), dt where h(t) = (f − g)(z(t), t), ∀t ∈ [0, T ]. Since H(x, z, p) − γ · z is nondecreasing with respect to z ∈ [−R0 , R0 ] we have for some r(t) ≥ 0 H(z(t), u(z(t), t), p(t)) − H(z(t), v(z(t), t), p(t)) = (γ + r(t))(u − v)(z(t), t). Finally one gets dM + (γ + r(t)) · M (t) ≤ h(t), t ∈ [0, T ]. dt Assume that r(·) is integrable and denote by A(t) the function A(t) = Rt {γ + r(σ)} dσ, t ∈ [0, T ]. After integration one gets 0 µ ¶ Z t −A(t) A(s) M (t) ≤ e M (0) + e · h(s) ds , t ∈ [0, T ]. 0
Rt We introduce also the primitive F (s) = − s h(σ) dσ, s, t ∈ [0, T ]. By integration by parts we can write Z t Z t eA(s) h(s) ds = eA(s) F 0 (s) ds 0 0 Z t Z t Z t = h(σ) dσ + eA(s) A0 (s) h(σ) dσ ds 0 0 s Z t Z t ³ ´ ≤ h(σ) dσ + eA(t) − 1 sup h(σ)dσ. 0≤s≤t
0
s
Finally we deduce that for all t ∈ [0, T ] we have sup (u(x, t) − v(x, t)) = M (t) ≤ e−γt sup (u(x, 0) − v(x, 0))+
x∈IRN
x∈IRN Z t
+ sup 0≤s≤t
sup (f (x, σ) − g(x, σ)) dσ. s x∈IRN
Corollary 2.1. Let u be a bounded time periodic viscosity u.s.c subsolution of ∂t u + H(x, u, Du) = f (x, t) in IRN × IR and v a bounded time periodic viscosity l.s.c. supersolution of ∂t v + H(x, v, Dv) = g(x, t) in IRN × IR, where f, g ∈ BU C(IRN × IR) and H are T periodic such that (2), (3), (5) hold (with γR > 0, ∀ R > 0). Then we have Z t sup (u(x, t) − v(x, t)) ≤ sup sup (f (x, σ) − g(x, σ)) dσ. x∈IRN
s≤t
s x∈IRN
Moreover, the hypothesis (3) can be replaced by u ∈ W 1,∞ (IRN × IR) or v ∈ W 1,∞ (IRN × IR).
January 8, 2007
18:38
26
WSPC - Proceedings Trim Size: 9in x 6in
icaade
M. Bostan & G. Namah
Proof. By using the time periodicity and Proposition 2.2 we have sup (u(x, t) − v(x, t)) = sup (u(x, t + nT ) − v(x, t + nT )) x∈IRN
x∈IRN
≤ e−γ(t+nT ) (kukL∞ + kvkL∞ ) (16) Z t+nT + sup sup (f (x, σ) − g(x, σ)) dσ. 0≤s≤t+nT
Observe that Z t+nT Z sup (f (x, σ) − g(x, σ)) dσ = s
x∈IRN
x∈IRN
s
t+nT
sup (f (x, σ − nT ) − g(x, σ − nT )) dσ
s x∈IRN Z t
=
sup (f (x, σ) − g(x, σ)) dσ s−nT x∈IRN Z t
≤ sup r≤t
sup (f (x, σ) − g(x, σ)) dσ. r x∈IRN
The conclusion follows by letting n → +∞ in (16). 3. Time Periodic Viscosity Solution when γR > 0 In this section we assume that the hypothesis (2) holds. In this case we obtain immediately the following comparison result for time periodic viscosity sub/supersolutions. Proposition 3.1. Let u, v ∈ BU C(IRN × IR) be bounded time periodic viscosity subsolution, resp. supersolution of (1) where H ∈ C(IRN ×IR×IRN ) is time periodic. We assume that (2), (3), (5) hold (with γR > 0, ∀ R > 0). Then we have u(x, t) ≤ v(x, t), ∀(x, t) ∈ IRN × IR. Moreover, the hypothesis (3) can be replaced by u ∈ W 1,∞ (IRN × IR) or v ∈ W 1,∞ (IRN × IR). Proof. By Proposition 2.1 we have eγT k(u(·, T ) − v(·, T ))+ kL∞ (IRN ) ≤ k(u(·, 0) − v(·, 0))+ kL∞ (IRN ) , where γ = γR0 > 0, R0 = max(kukL∞ (IRN ×IR) , kvkL∞ (IRN ×IR) ). By periodicity we have u(·, T ) − v(·, T ) = u(·, 0) − v(·, 0) and since eγT > 1 we deduce that (u(x, 0)−v(x, 0))+ ≤0, ∀x∈IRN. The conclusion follows by Proposition 2.1.
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Time Periodic Viscosity Solutions of Hamilton-Jacobi Equations
27
Corollary 3.1. Under the assumptions of Proposition 3.1 there is at most one time periodic viscosity solution of (1). We investigate now the existence of time periodic viscosity solution. Proposition 3.2. Let u0 ∈ BU C(IRN ) and assume that (2), (3), (5), (6) hold (with γR > 0, ∀ R > 0). Denote by u ∈ C(IRN × [0, +∞[) the unique viscosity solution of (7) and let un (x, t) = u(x, t + nT ), (x, t) ∈ IRN × [0, T ] for n ≥ 0. Then (un )n converges uniformly on IRN × [0, T ] towards a time periodic viscosity solution of (1). Proof. By hypothesis (6) we deduce that −M (resp. M ) is subsolution (resp. supersolution ) of (7) and by Proposition 2.1 we have −M −k(−u0 −M )+ k∞ ≤u(x, t)≤k(u0 −M )+ k∞ +M, (x, t) ∈ IRN ×[0, +∞[. Let γ=γR0 > 0 where R0 =kukL∞ (IRN ×]0,+∞[) . Consider v(x, t)=u(x, t+T ), ∀(x, t) ∈ IRN ×[0, +∞[. By the periodicity of H we deduce that v is viscosity solution of ∂t v + H(x, v, Dv) = f (t), (x, t) ∈ IRN × [0, +∞[. By using Proposition 2.1 we have ku(·, t + T ) − u(·, t)kL∞ (IRN ) = kv(·, t) − u(·, t)kL∞ (IRN ) ≤ e−γt kv(·, 0) − u(·, 0)kL∞ (IRN ) ≤ 2e−γt kukL∞ (IRN ×]0,+∞[) . In particular, by taking t = s + nT , s ∈ [0, T ] we deduce that kun+1 (·, s) − un (·, s)kL∞ (IRN ) ≤ 2e−nT γ kukL∞ (IRN ×]0,+∞[) , and therefore there is w ∈ C(IRN × IR), T periodic such that un → w|IRN ×[0,T ] uniformly on IRN × [0, T ]. By using the stability result (see Ref. 2,6) we deduce that w is viscosity solution of (1). 4. Time Periodic Viscosity Solution when γR = 0 In this section we investigate the more general case of hamiltonians H satisfying (8). In the case of coercif hamiltonians i.e., hamiltonians verifying (4), Theorem 1.1 gives a necessary and sufficient condition for the existence of time periodic viscosity solution. Proof. (of Theorem 1.1) Assume that there is a bounded viscosity solution V of (9). Since the hamiltonian satisfies (4) we can prove as usual that V is a Lipschitz function. For any α > 0 take 1 Mα = kV kL∞ (IRN ) + (C + kf kL∞ (IR) ) α
January 8, 2007
18:38
28
WSPC - Proceedings Trim Size: 9in x 6in
icaade
M. Bostan & G. Namah
and observe that for any (x, t) ∈ IRN × IR we have α(−Mα − V (x)) + H(x, −Mα , 0) ≤ f (t) ≤ α(Mα − V (x)) + H(x, Mα , 0). Therefore we can construct the stationary viscosity solution Vα of α(Vα − V (x)) + H(x, Vα , DVα ) = hf i, x ∈ IRN , and the time periodic viscosity solution vα of α(vα − V (x)) + ∂t vα + H(x, vα , Dvα ) = f (t), (x, t) ∈ IRN × IR.
(17)
In fact we have Vα = V , ∀α > 0 and by using Corollary 2.1 we obtain |vα (x, t)−V (x)| = |vα (x, t)−Vα (x)|≤kf −hf ikL1 (0,T ) , ∀(x, t) ∈ IRN ×IR, (18) which implies that (vα )α is uniformly bounded kvα kL∞ (IRN ×IR) ≤ kV kL∞ (IRN ) + kf − hf ikL1 (0,T ) , ∀α > 0. In order to extract a subsequence which converges uniformly on compact sets we prove that (vα )α are uniformly Lipschitz on IRN × IR. For this note that wα (x, t) = vα (x, t + h), (x, t) ∈ IRN × IR is time periodic viscosity solution of α·(wα −V (x))+∂t wα +H(x, wα , Dwα ) = f (t+h), (x, t) ∈ IRN ×IR. (19) By using Corollary 2.1 we have Z t vα (x, t + h) − vα (x, t) ≤ sup (f (σ + h) − f (σ)) dσ s≤t
s
(Z
= sup s≤t
Z
t+h
s+h
f (σ) dσ − t
(20) ) f (σ) dσ
s
≤ 2|h| · kf kL∞ (IR) , ∀ (x, t) ∈ IRN × IR, h ∈ IR. Since the hamiltonian satisfies (4) we can prove as usual that vα are uniformly Lipschitz with respect to x. Therefore the functions (vα )α>0 are uniformly Lipschitz and we can extract a subsequence which converges uniformly on compact sets of IRN × IR to a bounded Lipschitz function v. By using the stability result for continuous viscosity solutions we deduce that v is a viscosity solution of (1). The converse implication follows in a similar way. Corollary 4.1. Let H = H(x, z, p) be a hamiltonian verifying (8), (4), (5) and f be a continuous time periodic function. Assume that there is M > 0 such that H(x, −M, 0) ≤ hf i ≤ H(x, M, 0), ∀x ∈ IRN .
(21)
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Time Periodic Viscosity Solutions of Hamilton-Jacobi Equations
29
Then there is a bounded Lipschitz time periodic viscosity solution v of (1) satisfying −M −kf −hf ikL1 (0,T ) ≤ v(x, t) ≤ M +kf −hf ikL1 (0,T ) , ∀(x, t) ∈ IRN ×IR. 5. Asymptotic Behaviour for Large Frequencies Consider f : IR → IR a T periodic continuous function and denote by fn the Tn periodic functions given by fn (t) = f (nt), ∀t ∈ IR. Assume that the hamiltonian H satisfies (2), (3), (5), (6). Under the above hypotheses, for any n ≥ 1, there is a unique Tn periodic viscosity solution un of ∂t un + H(x, un , Dun ) = fn (t), (x, t) ∈ IRN × IR.
(22)
A natural question arising in this context concerns the convergence of the sequence (un )n . This convergence can be justified at least formally by introducing the fast variable s = nt and by using the asymptotic expansion 1 un (x, t) = u0 (x) + u1 (x, nt) + ... (23) n Plugging the ansatz (23) into (22) we obtain 1 1 ∂s u1 (x, s)+...+H(x, u0 (x)+ u1 (x, s)+..., Du0 (x)+ Du1 (x, s)+...) = f (s). n n Since un is Tn periodic with respect to t, we are looking for a T periodic function u1 (x, s) with respect to s. By integration over [0, T ] one gets Z 1 T 1 1 H(x, u0 (x)+ u1 (x, s)+..., Du0 (x)+ Du1 (x, s)+...)ds=hf i, x ∈ IRN. T 0 n n After passing to the limit for n → +∞ we deduce formally that limn→+∞ un = u0 , where u0 solves the cell problem (see Ref. 7) H(x, u0 , Du0 ) = hf i, x ∈ IRN . Theorem 5.1. Let H = H(x, z, p) be a hamiltonian satisfying (2), (3), (5), (6), where f is a T periodic continuous function. Denote by U , un the stationary, resp. time periodic viscosity solution of (9), resp. (22). Then the sequence (un )n converges uniformly on IRN × IR towards U and we have kun − U kL∞ (IRN ×IR) ≤
1 kf − hf ikL1 (0,T ) , ∀n ≥ 1. n
Proof. We introduce also wn (x, t) = un (x, nt ), (x, t) ∈ IRN × IR, which is T periodic. We deduce that wn satisfies in the viscosity sense n ∂t wn + H(x, wn , Dwn ) = f (t), (x, t) ∈ IRN × IR,
January 8, 2007
30
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
M. Bostan & G. Namah
which we can rewrite as 1 1 ∂t wn + H(x, wn , Dwn ) = f (t), (x, t) ∈ IRN × IR. n n Recall also that we have in the viscosity sense
(24)
1 1 H(x, U, DU ) = hf i, x ∈ IRN . (25) n n By using Corollary 2.1 we deduce that Z 1 t 1 (f (σ) − hf i) dσ ≤ kf − hf ikL1 (0,T ) , wn (x, t) − U (x) ≤ sup n s≤t n s and similarly U (x) − wn (x, t) ≤ n1 kf − hf ikL1 (0,T ) , ∀n ≥ 1. We obtain for all n ≥ 1 ¯ ¯ µ ¶ ¯ ¯ ¯un x, t − U (x)¯ ≤ 1 kf − hf ikL1 (0,T ) . ¯ n ¯ n Finally we deduce that kun − U kL∞ (IRN ×IR) ≤ n ≥ 1.
1 n kf
− hf ikL1 (0,T ) for all
References 1. M.G. Crandall and P.-L. Lions, Condition d’unicit´e pour les solutions g´en´eralis´ees des ´equations de Hamilton-Jacobi du premier ordre, C.R. Acad. Sci. Paris, S´er. I Math. 292 (1981), 183–186. 2. M.G. Crandall and P.-L. Lions, Viscosity solutions of Hamilton-Jacobi equations, Trans. Amer. Math. Soc., 277(1983), 1–42. 3. M.G. Crandall, L.C. Evans and P.-L. Lions, Some properties of viscosity solutions of Hamilton-Jacobi equations, Trans. Amer. Math. Soc., 282 (1984), 487–502. 4. P.-L. Lions, Generalized Solutions of Hamilton-Jacobi Equations, (Research Notes in Mathematics, Pitman, 1982). 5. M. Bostan, Periodic solutions for evolution equations, (Electronic J. Differential Equations, Monograph 3 2002), 41 pp. 6. G. Barles, Solutions de Viscosit´e des Equations de Hamilton-Jacobi, (SpringerVerlag, 1994). 7. P.-L. Lions, G. Papanicolaou and S.R.S. Varadhan, Homogeneization of Hamilton-Jacobi equations, preprint.
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
31
A VIABILITY RESULT FOR SEMILINEAR REACTION-DIFFUSION SYSTEMS ˘ and DANIELA ROS MONICA BURLICA ¸ U∗ Department of Mathematics, ”Gh.Asachi” University Ia¸si, Romania E-mail:
[email protected] [email protected] We consider a reaction-diffusion system of the form 0 u (t) = Au(t) + F (u(t), v(t)), t ≥ 0 v 0 (t) = Bv(t) + G(u(t), v(t)), t ≥ 0 u(0) = ξ, v(0) = η, where X and Y are real Banach spaces, K is a nonempty and locally closed subset in X × Y, A : D(A) ⊆ X → X, B : D(B) ⊆ Y → Y are the generators of two C0 -semigroups, {SA (t) : X → X; t ≥ 0} and {SB (t) : Y → Y ; t ≥ 0} respectively, F : K → X, G : K → Y, are continuous such that A + F and B + G are of compact type. We prove a necessary and sufficient condition in order that for each (ξ, η) ∈ K, problem above has at least one mild solution (u, v) : [ 0, T ] → K. Keywords: C0 -semigroup; Compact semigroup; Reaction-diffusion system; Viable set; Tangency condition; β-compact function.
1. Introduction The goal of this paper is to present a viability result referring to a class of semilinear reaction-diffusion system of the form: 0 u (t) = Au(t) + F (u(t), v(t)), t ≥ 0 (1) v 0 (t) = Bv(t) + G(u(t), v(t)), t ≥ 0 u(0) = ξ, v(0) = η where (X, k · kX ) and (Y, k · kY ) are real Banach spaces, K ⊆ X × Y, F : K → X, G : K → Y, and ξ ∈ X, η ∈ Y. ∗ This
work was supported by CNCSIS Grant A 1159/2006
January 8, 2007
32
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
M. Burlic˘ a & D. Ro¸su
We suppose that A : D(A) ⊆ X → X and B : D(B) ⊆ Y → Y generate two C0 -semigroups, {SA (t) : X → X; t ≥ 0} and {SB (t) : Y → Y ; t ≥ 0} respectively, and K is a nonempty and locally closed subset in X × Y. We recall that the subset K ⊆ X × Y is locally closed if for each ζ = (ξ, η) ∈ K there exists ρ > 0 such that DX×Y (ζ, ρ) ∩ K is closed, where, as usual, DX×Y (ζ, ρ) denotes the closed ball with center ζ and radius ρ in X × Y. Each subset in X × Y which is either open or closed is locally closed. Moreover, each subset K in X × Y which is closed relative to some open subset D, i.e. for which there exists a closed subset C ⊂ X × Y such that K = C ∩ D, is locally closed in X × Y. We are interested in finding sufficient conditions in order that for each (ξ, η) ∈ K there exists T > 0 such that (1) has at least one mild solution (u, v) : [ 0, T ] → K. As an application, we include a comparison result for a reaction-diffusion system. For a systematic study of problems of this kind see Ref. 1. 2. Preliminaries and the Main Results We assume familiarity with the basic concepts and results concerning infinitesimal generators of C0 -semigroups and mild solutions for Cauchy problems in Banach spaces and we refer to Refs. 2 and 3 for details. In order to prove our theorems we need the following technical results, concerning the Hausdorff measure of necompactness and uniqueness functions . Let (X, k · k) be a Banach space and B(X) the family of all bounded subsets of X. Definition 2.1. The function β : B(X) → R+ , defined by n(ε) [ D(xi , ε) β(B) = inf ε > 0; ∃ x1 , x2 , ...xn(ε) ∈ X, B ⊆ i=1
is called the Hausdorff measure of necompactness on X. Remark 2.1. We have β(B) = 0 if and only if B is relatively compact set. So, if X is finite dimensional β ≡ 0, because in this case the class of relatively compact subsets of X coincides with B(X). Lemma 2.1. Let X be a separable Banach space and {Fm ; m ∈ N } a subset in L1 (τ, T ; X ) for which there exists l ∈ L1 (τ, T ; R+ ) such that kFm (s)k ≤ l(s)
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A Viability Result for Semilinear Reaction-diffusion Systems
33
for each m ∈ N and a.e. for s ∈ [τ, T ]. Then the mapping s 7→ β({Fm (s); m ∈ N} ) is integrable on [τ, T ], and, for each t ∈ [τ, T ], we have µ½Z t ¾¶ Z t β Fm (s) ds; m ∈ N ≤ β( {Fm (s); m ∈ N } ) ds. τ
τ
See Ref. 4. Lemma 2.2. Let (un )n be a bounded sequence in X such that lim β({un ; n ≥ k } ) = 0. k
Then {un ; n ∈ N } is relatively compact. For details, see Ref. 5. We recall now: Definition 2.2. A function ω : R+ → R+ which is continuous, nondecreasing and the only solution of the Cauchy problem ½ 0 x (t) = ω(x(t)) x(0) = 0. is x ≡ 0 is called a uniqueness function. Remark 2.2. If ω : R+ → R+ is a uniqueness function, then, for each k > 0, kω is a uniqueness function too. Lemma 2.3. Let ω : R+ → R+ be a uniqueness function and let (γk )k be strictly decreasing to 0. Let (xk )k be a bounded sequence of measurable functions, from [ 0, T1 ] to R+ , such that Z t xk (t) ≤ γk + ω(xk (s)) ds, 0
for k = 1, 2, ... and for each t ∈ [ 0, T1 ]. Then there exists T ∈ ( 0, T1 ] such that limk xk (t) = 0 uniformly for t ∈ [ 0, T ]. For details see Ref. 5. First, let us consider the Cauchy problem ½ 0 u (t) = Au(t) + f (u(t)) u(0) = ξ,
(2)
where A : D(A) ⊆ X → X is the infinitesimal generator of C0 -semigroup {S(t) : X → X; t ≥ 0}, K is a nonempty subset in X and f : K → X is a given function.
January 8, 2007
34
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
M. Burlic˘ a & D. Ro¸su
Definition 2.3. The set K ⊆ X is viable with respect to A + f if for each ξ ∈ K, there exists T > 0 such that the Cauchy problem (2) has at least one mild solution u : [ 0, T ] → K. Definition 2.4. We say that η ∈ X is a A-tangent to K at ξ ∈ K if lim inf h↓0
1 dist (S(h)ξ + hη; K) = 0. h
(3)
In other words, η ∈ X is A-tangent to K at ξ ∈ K if for each δ > 0 and each neighborhood V of 0 there exist h ∈ (0, δ) and p ∈ V such that S(h)ξ + h(η + p) ∈ K.
(4)
The set of all A-tangent elements to K at ξ ∈ K is denoted by TKA (ξ). We notice that if A ≡ 0, then TKA (ξ) is the contingent cone at ξ ∈ K in the sense of Bouligand6 . Proposition 2.1. A necessary and sufficient condition in order that η ∈ TKA (ξ) is 1 lim inf dist h↓0 h
Ã
Z
!
h
S(h)ξ +
S(h − s)η ds; K
= 0.
0
For the proof see Ref. 5. Definition 2.5. Let A : D(A) ⊂ X → X be the infinitesimal generator of a C0 -semigroup {S(t) : X → X ; t ≥ 0} and f : K → X be a given function. We say that A + f is locally of β-compact type if, for each ξ ∈ K, there exist ρ > 0, a continuous function ` : R+ → R+ and a uniqueness function ω : R+ → R+ , such that β(S(t)f (C)) ≤ `(t)ω(β(C)) for each t > 0 and C ⊆ D(ξ, ρ) ∩ K. We present now some necessary and sufficient conditions in order that the set K be viable with respect to A + f. These conditions improve the main results in Refs. 7 and 8. Theorem 2.1. Let X be a Banach space, A : D(A) ⊂ X → X the infinitesimal generator of a C0 -semigroup {S(t) : X → X; t ≥ 0}, K a nonempty and locally closed subset in X and f : K → X such that A + f is locally of β-compact type. Then K is viable with respect to A + f if and only if for each ξ ∈ K, the next tangency condition is satisfied:
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A Viability Result for Semilinear Reaction-diffusion Systems
lim inf h↓0
1 dist (S(h)ξ + hf (ξ); K) = 0. h
35
(5)
Remark 2.3. Under the general hypotheses of Theorem 2.1, K is viable with respect to A + f if and only if for each ξ ∈ K, we have f (ξ) ∈ TKA (ξ). Theorem 2.2. Let A : D(A) ⊂ X → X be the infinitesimal generator of a compact C0 -semigroup, {S(t) : X → X; t ≥ 0}, K a nonempty and locally closed subset in X and f : K → X a continuous function. Then K is viable with respect to A + f if and only if, for each ξ ∈ K, the tangency condition (5) is satisfied. Since Theorem 2.2 is a consequence of Theorem 2.1 and the necessity of the latter is obvious, we will show next how to prove the sufficiency. Lemma 2.4. Let X be a Banach space, A : D(A) ⊂ X → X the infinitesimal generator of a C0 -semigroup, {S(t) : X → X; t ≥ 0 }, K a nonempty and locally closed subset in X and f : K → X a continuous function satisfying the condition (5). Let ξ ∈ K be arbitrary and let r > 0 be such that D(ξ, r) ∩ K is closed. Then, there exist ρ ∈ (0, r ] and T > 0 such that, for each ε ∈ (0, 1), there exist σ : [ 0, T ] → [ 0, T ] nondecreasing, θ : { (t, s); 0 ≤ s < t ≤ T } → [ 0, T ] measurable, g : [ 0, T ] → X Riemann integrable and u : [ 0, T ] → X continuous such that: (i) (ii) (iii) (iv)
s − ε ≤ σ(s) ≤ s for each s ∈ [ 0, T ]; u(σ(s)) ∈ D(ξ, ρ) ∩ K for each s ∈ [ 0, T ] and u(T ) ∈ D(ξ, ρ) ∩ K; kg(s)k ≤ ε for each s ∈ [ 0, T ]; θ(t, s) ≤ t for each 0 ≤ s < t ≤ T and t 7→ θ(t, s) is nonexpansive on ( s, T ]; Z t Z t (v) u(t) = S(t)ξ + S(t − s)f (u(σ(s))) ds + S(θ(t, s))g(s) ds 0
for each t ∈ [ 0, T ]; (vi) ku(t) − u(σ(t)) k ≤ ε for each t ∈ [ 0, T ].
0
Definition 2.6. A 4-uple (σ, θ, g, u ) which satisfies (i)-(vi) in Lemma 2.4 is called an ε-approximate solution of the Cauchy problem (2) on [ 0, T ]. Proof. Here we include only a sketch of proof. The details will appear in a forthcoming paper. Let ξ ∈ K be arbitrary and let r > 0 be such that D(ξ, r)∩K is closed. Let us choose ρ ∈ (0, r ], N > 0, M ≥ 1 and a > 0 such that kf (x)k ≤ N for every x ∈ D(ξ, ρ)∩K and kS(t)kL(X) ≤ M eat for every t ≥ 0. Since t 7→ S(t)ξ is continuous at t = 0 and S(0)ξ = ξ, we may find a
January 8, 2007
36
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
M. Burlic˘ a & D. Ro¸su
sufficiently small T > 0 such that sup kS(t)ξ − ξk + T M eaT (N + 1) ≤ ρ. t∈[ 0,T ]
First, we show the existence of an ε-approximate solution on an interval [0, δ] with δ∈(0, T ]. As, for every ξ∈K, f satisfies the tangency condition (5), from Proposition 2.1, it follows that for each ε ∈ (0, 1) there exist δ∈(0, T ] Z δ and p ∈ X with kpk ≤ ε, such that S(δ)ξ + S(δ − s)f (ξ)ds + δp ∈ K. 0
Let σ : [0, δ] → [0, δ], g : [0, δ] → X and θ : {(t, s); 0 ≤ s < t ≤ δ} → [0, δ] be given by σ(s) = 0, g(s) = p, θ(t, s) = 0 and let u : [0, δ] → X be Z t defined by u(t) = S(t)ξ + S(t − s)f (ξ) ds + tp, for each t ∈ [0, δ]. Simple 0
computational arguments show that (σ, θ, g, u) is an ε-approximate solution to the Cauchy problem (2) on the interval [ 0, δ ]. In the second step we will prove the existence of an ε-approximate solution for (2) defined on the whole interval [ 0, T ]. Let us denote by D(c) the set D(c) = [ 0, c ] × {(t, s); 0 ≤ s < t ≤ c} × [ 0, c ] × [ 0, c ], with c ≥ 0 and by S the set of all ε-approximate solutions to the problem (2), defined on D(c), with c ≤ T . On S we introduce a preorder “¹”as follows: we say that (σ1 , θ1 , g1 , u1 ), defined on D(c1 ), and (σ2 , θ2 , g2 , u2 ), defined on D(c2 ), satisfy (σ1 , θ1 , g1 , u1 ) ¹ (σ2 , θ2 , g2 , u2 ) if c1 ≤ c2 , σ1 (t) = σ2 (t), g1 (t) = g2 (t) for t ∈ [ 0, c1 ] and θ1 (t, s) = θ2 (t, s) for each 0 ≤ s < t ≤ c1 . Let us define the function N : S → R ∪ {+∞} by N ((σ, θ, g, u)) = c, where D(c) is the domain of definition of (σ, θ, g, u). Then N satisfies the hypotheses of Brezis–Browder Theorem 2.1.1, in Ref. 9, so S contains at least one N maximal element (σ, θ, g, u) whose domain is D(c). Finally, one may prove by contradiction that c = T. Proof. Sufficiency of Theorem 2.1. We will prove that there exists at least one sequence (εn )n ↓ 0 for which the sequence ((σn , θn , gn , un ))n , has the property that (un )n is uniformly convergent on [ 0, T ] to a function u : [ 0, T ] → K which is a mild solution of (2). Let ξ ∈ K be arbitrary and let r > 0 be such that D(ξ, r) ∩ K be closed. Let us choose ρ ∈ ( 0, r ], N > 0, M ≥ 1 a > 0 and T > 0 as in Lemma 2.4. Since A + f is locally of β-compact type, diminishing ρ ∈ (0, r ] and T > 0 if necessary, there exist ` : R+ → R+ continuous and a uniqueness function ω : R+ → R+ such that β(S(t)f (C) ) ≤ `(t)ω(β(C) ), for each C ⊆ D(ξ, ρ ) ∩ K, t ≥ 0 and all conclusions of Lemma 2.4 be satisfied. Let (εn )n ↓ 0 be a sequence in (0, 1) and let ((σn , θn , gn , un ))n be a sequence of εn -approximate solutions defined on [ 0, T ] whose existence is
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A Viability Result for Semilinear Reaction-diffusion Systems
37
ensured by Lemma 2.4. From (v), we have Z t Z t un (t) = S(t)ξ + S(t − s)f (un (σn (s) ) ) ds + S(θn (t, s) )gn (s) ds (6) 0
0
for each n ∈ N and t ∈ [ 0, T ]. Let Y ⊆ X be the closed subspace spanned by Y1 ∪ Y2 ∪ Y3 , where Y1 = {S(r)ξ; r ∈ [ 0, T ] ∩ Q}, Y = {S(r)f (un (σn (s))); n = 1, 2, . . . , r, s ∈ [ 0, T ] ∩ Q, s ≤ r}, 2 Y3 = {S(θn (r, s))gn (s); n = 1, 2, . . . , r, s ∈ [ 0, T ] ∩ Q, s ≤ r}. Clearly Y is separable. Since (t, x) 7→ S(t)x, f and un are continuous, and gn Z t S(t−s)f (un (σn (s)))ds, are integrable (n = 1, 2, ..., ) it follows that S(t)ξ, 0 Z t S(θn (t, s))gn (s)ds and thus un (t) belong to Y for n=1, 2, ... and 0
t ∈ [0, T ]. From Lemma 2.1, (iii), (vi), and (6) we get β({un (t); n ≥ k}) ≤ βY ({un (t); n ≥ k}) µ½Z t ¾¶ ≤ βY S(t − s)f (un (σn (s))) ds; n ≥ k 0 µ½Z t ¾¶ +βY S(θn (t, s))gn (s) ds ; n ≥ k Z
0 t
≤2 β ({S(t − s)f (un (σn (s))); n ≥ k}) ds 0 Z t +2 β ({S(θn (t, s))gn (s) ; n ≥ k}) ds 0 Z t ≤2 `(t − s)ω(β ({un (σn (s)); n ≥ k})) ds + 2T M eaT εk 0 Z t ≤2 sup `(θ)ω(β({un (s); n≥k}+{un (σn (s))−un (s); n≥k}))ds+2T M eaT εk 0 θ∈[0,T ]
Z ≤2
t
sup `(θ)ω(β ({un (s); n ≥ k}) + εk ) ds + 2T M eaT εk .
0 θ∈[ 0,T ]
Set xk (t) = β({un (t); n ≥ k}) + εk , for k = 1, 2, . . . and t ∈ [ 0, T ], ω0 (x) = 2 supθ∈[ 0,T ] `(θ)ω(x), for x ∈ R+ , and γk = (2T M eaT + 1)εk . We deduce that Z t xk (t) ≤ γk + ω0 (xk (s)) ds, 0
for k = 1, 2, . . . and t ∈ [ 0, T ].
January 8, 2007
38
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
M. Burlic˘ a & D. Ro¸su
From Remark 2.2, ω0 is a uniqueness function, so, by Lemma 2.3, diminishing T, if necessary, we have limk xk (t) = 0, uniformly for t ∈ [ 0, T ], which means that limk β( {un (t); n ≥ k} ) = 0, uniformly for t ∈ [ 0, T ]. Now, we can apply Lemma 2.2 to obtain that for each t ∈ [ 0, T ], {un (t); n ∈ N } is relatively compact in X. But, Theorem 2.3.1, p.45 in Ref. 10 proves that there exists u ∈ C( [ 0, T ]; X ) such that, on a sequence at least, we have limn un (t) = u(t), uniformly for t ∈ [ 0, T ]. Taking into account of (ii) and (vi) we get limn un (σn (t) ) = u(t), uniformly for t ∈ [ 0, T ] and u(t) ∈ D(ξ, ρ) ∩ K for each t ∈ [ 0, T ], because D(ξ, ρ) ∩ K is closed. Passing to the limit in (6) and using (iii), we obtain Z t u(t) = S(t − s) + S(t − s)f (u(s) ) ds, 0
for each t ∈ [ 0, T ]. We may now pass to a viability result referring to a reaction-diffusion system of the form (1). Let (X, k·kX ) and (Y, k·kY ) two real Banach spaces, K ⊆ X × Y, F : K → X, G : K → Y, and ξ ∈ X, η ∈ Y. We assume that the operators A : D(A) ⊆ X → X and B : D(B) ⊆ Y → Y are the generators of two C0 -semigroups. Definition 2.7. The set K is viable with respect to (A + F, B + G) if for each (ξ, η) ∈ K there exists T > 0 such that (1) has at least one mild solution (u, v) : [ 0, T ] → K. Remark 2.4. The system (1) can be written as a semilinear equation in a product space. Let X = X × Y endowed with the norm k · k, defined by k(x, y)k = kxkX + kykY , for each (x, y) ∈ X . Let A = (A, B) : D(A) ⊆ X → X be defined by A(x, y) = ( Ax, By ) for each (x, y) ∈ D(A) and let F : X → X , F(z) = ( F (z), G(z) ) for each z = (x, y) ∈ K. Hence, the system (1) can be written as ½ 0 z (t) = Az(t) + F(z(t)) (7) z(0) = ζ, where ζ = (ξ, η). In the hypotheses above, A is the infinitesimal generator of a C0 -semigroup { S(t) : X → X ; t ≥ 0}, given by S(t)(ξ, η) = (SA (t)ξ, SB (t)η) for each t ≥ 0 and (ξ, η) ∈ X . It is obvious that K is viable with respect to (A + F, B + G) in sense of Definition 2.7 if and only if K is viable with respect to A + F in sense of Definition 2.3, which means that for each ζ ∈ K, there exists T > 0 such that the system (7) has at least one mild solution z : [0, T ] → K.
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A Viability Result for Semilinear Reaction-diffusion Systems
39
Definition 2.8. We say that (A + F, B + G) is locally of β-compact type if F, G are continuous functions and there exist ` : R+ → R+ continuous and a uniqueness function ω : R+ → R+ such that for each ζ = (ξ, η) ∈ K, there exists ρ > 0 such that for each set C ⊆ DX×Y (ζ, ρ) ∩ K and for each t ≥ 0, we have βX×Y ( (SA (t)F (C), SB (t)G(C) ) ) ≤ `(t)ω(βX×Y (C) ). Remark 2.5. One may easily see that (A + F, B + G) is locally of βcompact type if and only if A + F is locally of β-compact type in sense of Definition 2.5. Let us introduce the following hypotheses which we will use in the sequel: (H1 ) A : D(A) ⊆ X → X, B : D(B) ⊆ Y → Y are the generators of two C0 -semigroups, {SA (t) : X→X; t ≥ 0} and {SB (t) : Y →Y ; t ≥ 0} respectively; (H2 ) K ⊆ X × Y is nonempty and locally closed; (H3 ) (A + F, B + G) is locally of β-compact type. The main viability result is: Theorem 2.3. Assume that (H1 ), (H2 ), (H3 ) are satisfied. The necessary and sufficient condition in order that K be viable with respect to (A + F, B + G) is that, for every (ξ, η) ∈ K lim inf h↓0
1 dist((SA (h)ξ + hF (ξ, η), SB (h)η + hG(ξ, η)); K) = 0. h
(8)
In view of Remark 2.4, the Theorem 2.3 can be reformulated as: Theorem 2.4. Assume that (H1 ), (H2 ), (H3 ) are satisfied. The necessary and sufficient condition in order that K be viable with respect to A + F is that, for every ζ ∈ K lim inf h↓0
1 dist(S(h)ζ + hF(ζ); K ) = 0. h
(9)
Hence the proof of this theorem follows from the Theorem 2.1. We conclude this section with a nonautonomous variant of Theorem 2.3. Definition 2.9. Let A : D(A) ⊆ X → X and B : D(B) ⊆ Y → Y be the infinitesimal generators of two C0 -semigroups {SA (t) : X → X ; t ≥ 0} and {SB (t) : Y → Y ; t ≥ 0} respectively, K a nonempty subset in R × X × Y, F : K → X and G : K → Y two given functions. We say that (A+F, B +G) is locally of β-compact type with respect to the second argument, i.e. with
January 8, 2007
18:38
40
WSPC - Proceedings Trim Size: 9in x 6in
icaade
M. Burlic˘ a & D. Ro¸su
respect to (u, v), if, for each (τ, ξ, η) ∈ K, there exist ρ > 0, a continuous function l : R+ → R+ and a uniqueness function ω : R+ → R+ , such that βX×Y (SA (t)F (C), SB (t)G(C)) ≤ l(t)ω(βX×Y (ΠX×Y C)) for each t > 0 and each C ⊆ DR×X×Y ((τ, ξ, η), ρ) ∩ K. Theorem 2.5. Assume that X and Y are Banach spaces and (H1 ) is satisfied. Let K ⊆ R×X ×Y be a locally closed set and let (F, G) : K → X ×Y be continuous. Let us assume that (A + F, B + G) is locally of β-compact type with respect the second argument. Then a necessary and sufficient condition in order that K be viable with respect to (A + F, B + G) is that, for each (τ, ξ, η) ∈ K lim inf h↓0
1 dist ((τ + h, SA (h)ξ + hF (τ, ξ, η), SB (h)η + hG(τ, ξ, η)); K) = 0. h
3. An Example for a Predator-pray System Let Ω ⊆ Rn , n = 1, 2, . . . , be a bounded domain with C 2 boundary Γ, let δi ≥ 0, i = 1, 2, p > 0, q > 0, let f : R × R → R+ and g : R × R → R− be two continuous functions and let us consider the following general predatorpray system ut (t, x) = δ1 ∆u − pu(t, x) + f (u(t, x), v(t, x)) (t, x) ∈ Qτ,∞ vt (t, x) = δ2 ∆v + qv(t, x) + g(u(t, x), v(t, x)) (t, x) ∈ Qτ,∞ (10) u(t, x) = v(t, x) = 0 (t, x) ∈ Στ,∞ , u(τ, x) = ξ(x), v(τ, x) = η(x) x ∈ Ω, where 0 ≤ τ < T ≤ ∞, Qτ,T = (τ, T ) × Ω, Στ,T = (τ, T ) × Γ and ξ, η ∈ L2 (Ω). Let fe : R × R → R+ and ge : R × R → R− be two continuous functions such that f (u, v) ≤ fe(u, v) and g(u, v) ≥ ge(u, v)
(11)
for each (u, v) ∈ R × R. Let us consider also the comparison predator-pray system ut (t, x) = δ1 ∆u − pu(t, x) + fe(u(t, x), v(t, x)) (t, x) ∈ Q0,∞ vt (t, x) = δ2 ∆v + qv(t, x) + ge(u(t, x), v(t, x)) (t, x) ∈ Q0,∞ (12) u(t, x) = v(t, x) = 0 (t, x) ∈ Σ0,∞ , u(0, x) = u0 (x), v(0, x) = v0 (x) x ∈ Ω, where u0 , v0 ∈ L2 (Ω), u0 (x) ≥ 0, v0 (x) ≥ 0 a.e. for x ∈ Ω. Let (e u, ve) : R+ × Ω → R+ × R+ be a mild solution of (12).
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A Viability Result for Semilinear Reaction-diffusion Systems
41
Using the viability result of Theorem 2.5, we will prove a sufficient conditions in order that, for each (ξ, η) ∈ L2 (Ω) × L2 (Ω), with 0 ≤ ξ(x) ≤ u e(τ, x) and η(x) ≥ ve(τ, x)
(13)
a.e. for x ∈ Ω, the predator-pray system (2.1) has at least one solution (u, v) : R+ × Ω → R+ × R+ , such that, for each t ∈ [ τ, ∞), we have 0 ≤ u(t, x) ≤ u e(t, x) and v(t, x) ≥ ve(t, x) a.e. for x ∈ Ω. Let K ⊆ R × L2 (Ω) × L2 (Ω) be defined by © ª K = (t, u, v) ∈ R+ × L2 (Ω) × L2 (Ω); (u, v) satisfy (16) below . 0 ≤ u(x) ≤ u e(t, x) and v(x) ≥ ve(t, x)
(14)
(15) (16)
a.e. for x ∈ Ω. Theorem 3.1. Let Ω ⊆ Rn , n = 1, 2, ..., be a bounded domain with C 2 boundary Γ, let f : R × R → R+ , g : R × R → R− , fe : R × R → R+ and ge : R × R → R− be continuous such that (11) are satisfied. Assume that for each (u0 , v0 ) ∈ R × R, u 7→ fe(u, v0 ) and v 7→ ge(u0 , v) are nondecreasing, u 7→ ge(u, v0 ) and v 7→ fe(u0 , v) are nonincreasing and there exist the constants ci ≥ 0, i = 1, ..., 5 such that |fe(u, v)| ≤ c1 |u| + c2 , and |e g (u, v)| ≤ c3 |u| + c4 |v| + c5 for each (u, v) ∈ R × R. Let (u0 , v0 ) ∈ L2 (Ω) × L2 (Ω) with u0 (x) ≥ 0 and v0 (x) ≥ 0 a.e. for x ∈ Ω and let (e u, ve) : R+ → L2 (Ω)×L2 (Ω) be a global mild solution of (12) with u e(t, x) ≥ 0 for each t ≥ 0 and a.e. for x ∈ Ω. Let K be defined by (15). Then, for each (τ, ξ, η) ∈ K, the problem (2.1) has at least one global mild solution (u, v) : [ τ, ∞) → L2 (Ω) × L2 (Ω) satisfying for each τ < δ < T : (i) u, v ∈ C([ τ, T ]; L2 (Ω)) ∩ L2 (δ, T ; H 2 (Ω)) ∩ W 1,1 (δ, T ; H01 (Ω)) ; (ii) for each t ∈ [ τ, ∞), (t, u(t), v(t)) ∈ K. Proof. Since (i) is well known – see Theorem 11.6.1 in Ref. 3, p. 265, it remains to prove (ii). So, we have to show first that K is viable, in R+ × L2 (Ω) × L2 (Ω), with respect to (δ1 ∆ − pI + f, δ2 ∆ + qI + g) and second that every mild solution (u, v) : [ τ, T ) → L2 (Ω) × L2 (Ω), satisfying (t, u(t), v(t)) ∈ K for each t ∈ [ τ, T ), can be extended to a global one obeying the very same constraints. Let us denote by X = L2 (Ω). We rewrite (2.1) and (12) as an evolution systems in X. Let us define A : D(A) ⊆ X → X and B : D(B) ⊆ X → X by D(A) = H01 (Ω) ∩ H 2 (Ω) and Au = δ1 ∆u − pu for u ∈ D(A)
January 8, 2007
18:38
42
WSPC - Proceedings Trim Size: 9in x 6in
icaade
M. Burlic˘ a & D. Ro¸su
and respectively by D(B) = H01 (Ω) ∩ H 2 (Ω) and Bv = δ2 ∆v + qv for v ∈ D(B). Let us define F : X × X → X and G : X × X → X by F (u, v)(x) = f (u(x), v(x)) and G(u, v)(x) = g(u(x), v(x)) respectively, for each (u, v) ∈ e by the same relations with F and X × X and a.e. for x ∈ Ω, and Fe and G e G but with f instead of f and ge instead of g. With the notations above, the problem (2.1) can be rewritten as the abstract evolution system ½ 0 u (t) = Au(t) + F (u(t), v(t)) (17) v 0 (t) = Bv(t) + G(u(t), v(t)), while (12) takes the abstract form ( u0 (t) = Au(t) + Fe(u(t), v(t)) e v 0 (t) = Bv(t) + G(u(t), v(t)).
(18)
e are wellSince fe and ge are continuous and have sublinear growth, Fe and G defined, continuous and have sublinear growth. From the very same reason F and G are well-defined, continuous and have sublinear growth too. Let e ⊆ R+ × L2 (Ω) × L2 (Ω) be defined by K © ª e = (t, u, v) ∈ R+ × L2 (Ω) × L2 (Ω); (u, v) satisfy (20) below K (19) u(x) ≤ u e(t, x), and v(x) ≥ ve(t, x)
(20)
a.e. for x ∈ Ω. To prove that K is viable with respect to (A + F, B + G) e is viable with respect to (A + F, B + G). This is it suffices to show that K a direct consequence of the maximum principle for parabolic equations — see Theorem 1.7.5. in Ref. 5 — combined with the fact that F and u e are nonnegative. Since both A and B generate compact semigroups {SA (t) : X → X, t ≥ 0} and {SB (t) : X → X, t ≥ 0} respectively, in view of e is viable with respect to (A + F, B + G), we Theorem 2.5, to show that K have merely to check the tangency condition lim inf h↓0
1 e = 0, (21) dist ((τ + h, SA (h)ξ + hF (ξ, η), SB (h)η + hG(ξ, η)); K) h
e To do this, it suffices to prove that for each (τ, ξ, η)∈K e for each (τ, ξ, η)∈K. e and and each h > 0 there exists (uh , vh )∈X × X with (τ + h, uh , vh ) ∈ K 1 inf kSA (h)ξ + hF (ξ, η) − uh k = 0 lim h↓0 h (22) 1 lim inf kSB (h)η + hG(ξ, η) − vh k = 0. h↓0 h
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A Viability Result for Semilinear Reaction-diffusion Systems
43
e and let us define uh and vh by So, let (τ, ξ, η) ∈ K, Z τ +h uh = SA (h)ξ + SA (τ + h − s)F (ξ, η) ds τ Z τ +h + SA (τ + h − s)[ Fe(e u(s), ve(s)) − Fe(e u(τ ), ve(τ )) ] ds τ
and respectively by Z τ +h vh = SB (h)η + SB (τ + h − s)G(ξ, η) ds τ Z τ +h e u(s), ve(s)) − G(e e u(τ ), ve(τ )) ] ds. + SB (τ + h − s)[ G(e τ
Now let us observe that, inasmuch as ξ ≤ u e(τ ) and η ≥ ve(τ ) a.e. on Ω, we have both SA (h)ξ ≤ SA (h)e u(τ ) and SB (h)η ≥ SB (h)e v (τ ). See Theorem 1.7.5 in Ref. 5. Recalling that f ≤ fe and taking into account of the monotonicity properties of fe, we get F (ξ, η) ≤ Fe(ξ, η) ≤ Fe(e u(τ ), ve(τ )). Similarly, using the fact that g ≥ ge and the monotonicity properties of ge, e η) ≥ G(e e u(τ ), ve(τ )). We get both uh ≤ u we deduce G(ξ, η) ≥ G(ξ, e(τ + h) e On the other hand and vh ≥ ve(τ + h) and thus (τ + h, uh , vh ) ∈ K. Z
τ +h
kSA (h)ξ + hF (ξ, η) − uh k ≤ kSA (τ + h − s)F (ξ, η) − F (ξ, η)k ds τ Z τ +h +M eah kFe(e u(s), ve(s)) − Fe(e u(τ ), ve(τ ))k ds, τ
where M ≥ 1 and a > 0 are the growth constants of the C0 -semigroup {SA (t) : X → X, t ≥ 0}. Since Fe, u e and ve are continuous we conclude that the first equality in (22) holds. Similarly, we get the second equality, and e and consequently the viability this completes the proof of the viability of K of K. Let us remark that f and g have sublinear growth. In addition K satisfies: for each sequence ((tn , ξn , ηn )n ) in K with limn (tn , ξn ηn ) = (t, ξ, η) and t < TK , where TK = sup{t ∈ R; there exists (ξ, η)∈X×X, with (t, ξ, η)∈K}, it follows that (t, ξ, η) ∈ K. Then it follows that each mild solution (u, v) : [ τ, T ] → X × X of (2.1) satisfying (t, u(t), v(t)) ∈ K for each t ∈ [ τ, T ] can be continued up to a global one (u∗ , v ∗ ) : [ τ, TK ) → X × X satisfying the very same condition on [ τ, TK ). Since (e u, ve) is defined on R+ and (t, u e(t), ve(t)) ∈ K for each t ∈ [ 0, ∞) we conclude that TK = ∞ and this completes the proof.
January 8, 2007
44
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
M. Burlic˘ a & D. Ro¸su
References 1. S. Ladde, V. Lakshmikantham, and A. S. Vatsalo, Monotone, Iterative Techniques for Nonlinear Differential Equations, Monographs, Advanced Texts and Surveys in Pure and Applied Mathematics, 27 (Pitman, 1985). 2. V. Barbu, Nonlinear Semigroups and Differential Equation in Banach Spaces, (Editura Academiei, Bucure¸sti, Noordhoff, 1976). 3. I. I. Vrabie, C0 -Semigroups and Applications, (North-Holland Mathematics Studies, 191 (2003). 4. H. M¨ onch, Boundary value problems for nonlinear ordinary differential equations of second order in Banach spaces, Nonlinear Anal., 4 (1980), 985–999. 5. O. Cˆ arj˘ a, M. Necula and I. I. Vrabie, Viability, Invariance and Applications, (North-Holland Mathematics Studies, 207), in print. 6. H. Bouligand, Sur les surfaces d´epourvues de points hyperlimit´es, Ann. Soc. Polon. Math., 9, (1930). 7. N. H. Pavel, Invariant sets for a class of semi-linear equations of evolution, Nonlinear Anal., 1 (1977), 187–196. 8. O. Cˆ arj˘ a and I. I. Vrabie, Some new viability results for semilinear differential inclusions, NoDEA Nonlinear Differential Equations Appl., 4 (1997), 401– 424. 9. O. Cˆ arj˘ a and I. I. Vrabie, Differential Equations on Closed Sets, in Handbook of Differential Equations, Ordinary Differential Equations, 2, Edited by A. Ca˜ nada, P. Dr´ abek and A. Fonda, (Elsevier B.V., 2005), 147–238. 10. I. I. Vrabie, Compactness methods and flow-invariance for perturbed nonlinear semigroups, An. S ¸ tiint¸. Univ. Al. I. Cuza Ia¸si Sect¸. I a Mat., 27 (1981), 117–125.
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
45
NECESSARY OPTIMALITY CONDITIONS FOR HYPERBOLIC DISCRETE INCLUSIONS AURELIAN CERNEA Faculty of Mathematics and Informatics, University of Bucharest, Academiei 14, 010014 Bucharest, Romania E-mail:
[email protected] The aim of this paper is to present a short survey of several new results concerning optimization of hyperbolic discrete inclusions. We study an optimization problem given by a hyperbolic discrete inclusion with end point constraints and we present several approaches concerning first and second-order necessary optimality conditions for this problem. Keywords: Derived cone; Discrete inclusion; Necessary optimality conditions, Minimum Principle.
1. Introduction Consider the problem minimize g(xN N )
(1)
over the solutions of the multiparameter discrete inclusion xij ∈ Fij (xij−1 , xi−1j , xi−1j−1 ),
i = 0, 1, ..., N,
j = 0, 1, ..., N,
(2)
with end point constraints of the form xN N ∈ XN ,
(3)
where Fij (.) : R3n → P(Rn ), i, j = 0, ..., N , are given set-valued maps, XN ⊂ Rn and g(.) : Rn → R is also a given function. The aim of this paper is to announce several new results concerning first and second-order necessary optimality conditions for problem (1)–(3). At the beginning we obtain necessary optimality conditions for a solution x = (x0 , x1 , ..., xN ), xi = (xi0 , xi1 , ..., xiN ), i = 0, 1, ..., N to the problem (1)–(3) in terms of a variational inclusion associated to the problem
January 8, 2007
46
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A. Cernea
(2) and in terms of the cone of interior directions (Dubovitskij-Miljutin tangent cone) to the set XN at xN N . Afterwards this result is improved by replacing the cone of interior directions with the concept of derived cone introduced by Hestenes1 and using a remarkable ”intersection property” of derived cones obtained by Mirica2 . Finally, we present an approach concerning second-order necessary optimality conditions for the problem (1)–(3). Optimal control problems for systems described by discrete inclusions have been studied by many authors (Refs. 3–8 etc.). In the framework of multivalued problems, necessary optimality conditions for problem (1)–(2) (i.e. without end point constraints) are obtained in Ref. 9. The idea in Ref. 9 is to use a special (Warga’s) open mapping theorem to obtain a sufficient condition for (2) to be locally controllable around a given trajectory and as a consequence, via a separation result, to obtain the maximum principle. In contrast with the approach in Ref. 9, even if the problem studied in the present paper is more difficult, due to end point constraints, the method in our approach seems to be conceptually very simple, relying only 2–3 clear-cut steps and using a minimum of auxiliary results. 2. Preliminaries Denote by SF the solution set of inclusion (2), i.e. SF := {x = (x0 , x1 , ..., xN ); i, j = 0, 1, ..., N,
xi = (xi0 , xi1 , ..., xiN ),
x is a solution of (2),
xij = 0
xij ∈ Rn ,
if i < 0 or j < 0}.
and by RFN := {xN N ; x ∈ SF } the reachable set of inclusion (2). We consider x = (x0 , x1 , ..., xN ) ∈ SF a solution of (2). Since the reachable set RFN is, generally, neither a differentiable manifold, nor a convex set, its infinitesimal properties may be characterized only by tangent cones in a generalized sense, extending the classical concepts of tangent cones in Differential Geometry and Convex Analysis, respectively. From the multitude of the intrinsic tangent cones in the literature, the contingent, the quasitangent and Clarke’s tangent cones, defined, respectively, by ¾ ½ xm − x n →v Kx X = v ∈ R ; ∃ sm → 0+, xm ∈ X : sm Qx X = {v ∈ Rn ; ∃ c(.) : [0, s0 ) → X, c(0) = x, c0 (0) = v} ¾ ½ ym − xm →v Cx X = v ∈ Rn ; ∀(xm , sm )→(x, 0+), xm ∈X, ∃ ym ∈X : sm
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Hyperbolic Discrete Inclusions
47
seem to be among the most oftenly used in the study of different problems involving nonsmooth sets and mappings. The second-order quasitangent set to X at x relative to v ∈ Qx X is defined by Q2(x,v) X = {w ∈ Rn ; ∀sm → 0+, ∃wm → w : x + sm v + s2m wm ∈ X}. We recall that, in contrast with Kx X, Qx X, the cone Cx X is convex and one has Cx X ⊂ Qx X ⊂ Kx X. Another important tangent cone is the cone of interior directions (Dubovitskij-Miljutin tangent cone) defined by Ix X
:= {v ∈ Rn ; ∃ s0 , r > 0 : x + sB(v, r) ⊂ X ∀ s ∈ [0, s0 )},
B(v, r) := {w ∈ Rn ; kw − vk < r},
B(v, r) := cl B(v, r).
From the properties of the cone of interior directions we recall only the following: Qx X1 ∩ Ix X2 ⊂ Qx (X1 ∩ X2 ).
(4)
The concept of derived set was introduced for the first time by Hestenes1 . Definition 2.1. A subset M ⊂ Rn is said to be a derived set to X ⊂ Rn at x ∈ X if for any finite subset {v1 , ..., vk } ⊂ M , there exist s0 > 0 and a continuous mapping a(.) : [0, s0 ]k → X such that a(0) = x and a(.) is (conically) differentiable at s = 0 with the derivative col[v1 , ..., vk ] in the sense that Pk ka(θ) − a(0) − i=1 θi vi k = 0. lim kθk Rk + 3θ→0 A subset C ⊂ Rn is said to be a derived cone of X at x if it is a derived set and also a convex cone. For the basic properties of derived sets and cones we refer to Hestenes1 ; we recall that if M is a derived set then M ∪ {0} as well as the convex cone generated by M , defined by
cco(M ) =
( k X
) λj v j ;
λj ≥ 0, k ∈ N, vj ∈ M, j = 1, ..., k
i=1
is also a derived set, hence a derived cone. The fact that the derived cone is a proper generalization of the classical concepts in Differential Geometry and Convex Analysis is illustrated by the
January 8, 2007
48
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A. Cernea
following results (Ref. 1): if X ⊂ Rn is a differentiable manifold and Tx X is the tangent space in the sense of Differential Geometry to X at x Tx X = {v ∈ Rn ;
∃ c : (−s, s) → X, of class C 1 , c(0) = x, c0 (0) = v}
then Tx X is a derived cone; also, if X ⊂ Rn is a convex subset then the tangent cone in the sense of Convex Analysis defined by T Cx X = cl{t(y − x);
t ≥ 0, y ∈ X}
is also a derived cone. By cl A we denote the closure of the set A ⊂ Rn . Since any convex subcone of a derived cone is also a derived cone, such an object may not be uniquely associated to a point x ∈ X; moreover, simple examples show that even a maximal with respect to set-inclusion derived cone may not be uniquely defined: if the set X ⊂ R2 is defined by [ X = C1 C2 , C1 = {(x, x); x ≥ 0}, C2 = {(x, −x), x ≤ 0} then C1 and C2 are both maximal derived cones of X at the point (0, 0) ∈ X. We recall that two cones C1 , C2 ⊂ Rn are said to be separable if there exists q ∈ Rn \{0} such that: hq, vi ≤ 0 ≤ hq, wi
∀v ∈ C1 , w ∈ C2 .
We denote by C + the positive dual cone of C ⊂ Rn C + = {q ∈ Rn ;
hq, vi ≥ 0,
∀ v ∈ C}
The negative dual cone of C ⊂ Rn is C − = −C + . The following ”intersection property” of derived cones, obtained by Miric˘a2 , is a key tool in the proof of necessary optimality conditions. Lemma 2.1. Let X1 , X2 ⊂ Rn be given sets, x ∈ X1 ∩ X2 , and let C1 , C2 be derived cones to X1 , resp. to X2 at x. If C1 and C2 are not separable, then Cl(C1 ∩ C2 ) = (Cl(C1 )) ∩ (Cl(C2 )) ⊂ Qx (X1 ∩ X2 ). For a mapping g(.) : X ⊂ Rn → R which is not differentiable, the classical (Fr´echet) derivative is replaced by some generalized directional derivatives. We recall only, in the case when g(.) is locally-Lipschitz at x ∈ int(X), Clarke’s generalized directional derivative, defined by: DC g(x; v) =
g(y + θv) − g(y) , θ (y,θ)→(x,0+) lim sup
v ∈ Rn .
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Hyperbolic Discrete Inclusions
49
The first and second order uniform lower Dini derivative are defined as follows g(x + θv 0 ) − g(x) , D↑ g(x; v) = 0 lim inf θ (v ,θ)→(v,0+) D↑2 g(x, v; w) =
g(x + θv + θ2 w0 ) − g(x) − θD↑ g(x; v) . θ2 (w ,θ)→(w,0+) lim inf 0
When g(.) is of class C 2 one has 1 D↑2 g(x, v; w) = g 0 (x)T z + v T g 00 (x)v. 2 The results in the next section will be expressed, in the case where g(.) is locally-Lipschitz at x, in terms of the Clarke generalized gradient, defined by: D↑ g(x, v) = g 0 (x)T v,
∂C g(x) = {q ∈ Rn ;
< q, v >≤ DC g(x; v)
∀ v ∈ Rn }.
By P(Rn ) we denote the family of all subsets of Rn . Corresponding to each type of tangent cone, say τx X, one may introduce a set-valued directional derivative of a multifunction G(.) : X ⊂ Rn → P(Rn ) (in particular of a single-valued mapping) at a point (x, y) ∈ Graph(G) as follows τy G(x; v) = {w ∈ Rn ; (v, w) ∈ τ(x,y) Graph(G)},
v ∈ τx X.
Similarly one may define second-order directional derivatives of the setvalued map G(.). For example the second-order quasitangent derivative of G at (x, u) relative to (y, v) ∈ Q(x,u) (graph(G(.)) is the set-valued map Q2(u,v) G(x, y, .) defined by graphQ2(u,v) G(x, y; .) = Q2((x,u),(y,v)) (graphG(.)). We recall that a set-valued map, A(.) : Rn → P(Rn ) is said to be a convex (respectively, closed convex) process if Graph(A(.)) ⊂ Rn × Rn is a convex (respectively, closed convex) cone. In what follows, we shall assume the following hypothesis. Hypothesis 1.1. i) The set-valued maps Fij (.) have nonempty compact convex values ∀i, j ∈ {0, 1, ..., N } and there exists L > 0 such that Fij (.) is Lipschitz with the Lipschitz constant L, ∀i, j ∈ {0, 1, ..., N }.
January 8, 2007
18:38
50
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A. Cernea
ii) There exists Aij (.) : R3n → P(Rn ), i, j = 0, 1, ..., N a family of closed convex processes such that Aij (u, v, w) ⊂ Qxij Fij ((xij−1 , xi−1j , xi−1j−1 ); (u, v, w)) ∀u, v, w ∈ Rn , ∀i, j ∈ {0, 1, ..., N }. Let A0 ⊂ Qx00 F00 (0, 0, 0) be a closed convex cone. To the problem (2) we associate the linearized problem wij ∈Aij (wij−1 , wi−1j , wi−1j−1 ), w00 ∈A0 , i, j=0, 1, ..., N, i+j > 0 with the boundary conditions wij = 0 for i < 0 or j < 0
(5)
N Denote by SA the solution set of inclusion (5) and by RA the reachable set of inclusion (5). We recall that if A : Rn → P(Rn ) is a set-valued map then the adjoint of A is the multifunction A∗ : Rn → P(Rn ) defined by
A∗ (p) = {q ∈ Rn ; hq, vi ≤ hp, v 0 i
∀(v, v 0 ) ∈ graphA(.)}.
The next result, due to Tuan and Ishizuka8 characterizes the positive N dual of the reachable set RA of problem (5). Lemma 2.2. Assume that Hypothesis 1.1 is satisfied and let r(.) : Rn → P(Rn ) be the set-valued map defined by r(α) := {wN N ; w = (w0 , ..., wN ) is a solution of (5), w00 = α}. Then, for all b ∈ Rn r∗ (b) = {u101 + u210 + u311 ; (u1ij , u2ij , u3ij ) ∈ A∗ij (u1ij+1 + u2i+1j + u3i+1j+1 ), i, j=0, 1, ..., N, 0 < i + j < 2N, (u1N N , u2N N , u3N N ) ∈ A∗N N (b)}. 3. Results N Using the property in (4), the fact that RA ⊂ QxN N RFN (Ref. 10) and Lemma 2.2 we obtain a Minimum Principle for problem (1)–(3).
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Hyperbolic Discrete Inclusions
51
Theorem 3.1. Let XN ⊂ Rn be a closed set, let x ∈ SF be an optimal solution for problem (1)–(3) such that Hypothesis 1.1 is satisfied and let g(.) : Rn → R be a locally Lipschitz function. Then for any closed convex cone A0 ⊂ Qx00 F00 (0, 0, 0) and any convex cone C1 ⊂ IxN N XN there exist λ ∈ {0, 1}, q ∈ Rn and u1ij , u2ij , u3ij ∈ Rn such that (u1ij , u2ij , u3ij ) ∈ A∗ij (u1ij+1 + u2i+1j + u3i+1j+1 ), 0 < i + j < 2N, (u1N N , u2N N , u3N N ) ∈ A∗N N (q), q ∈ λ∂C g(xN N ) − C1+ , u101 + u210 + u311 ∈ A+ 0,
(6)
(7)
® ® 1 uij+1 + u2i+1j + u3i+1j+1 , xij = min{ u1ij+1 + u2i+1j + u3i+1j+1 , v ; v ∈ Fij (xij−1 , xi−1j , xi−1j−1 )}, 0 < i + j < 2N, hq, xN N i = min{hq, vi ; v ∈ FN N (xN N −1 , xN −1N , xN −1N −1 )}, ® 1 u01 + u210 + u311 , x00 = min{hv, x00 i ; v ∈ F00 (0, 0, 0)} λ + kqk > 0.
(8)
(9)
For the details of the proof see Ref. 10. In Theorem 3.1 an important hypothesis is that the terminal set XN is assumed to have a nonempty cone of interior directions. Such type of assumption may be overcome by using the concept of derived cone. Using the fact that if A0 is a derived cone to F00 (0, 0, 0) at x00 then N the reachable set RA is a derived cone to RFN at xN N (Ref. 11), Lemma 2.1 and Lemma 2.2 we have the next version of the Minimum Principle for problem (1)–(3). Theorem 3.2. Let XN ⊂ Rn be a closed set, let x ∈ SF be an optimal solution for problem (1)–(3) such that Hypothesis 1.1 is satisfied and let g(.) : Rn → R be a locally Lipschitz function. Then for any derived cones A0 of F00 (0, 0, 0) at x00 and C1 of XN at xN N there exist λ ∈ {0, 1}, q ∈ Rn and u1ij , u2ij , u3ij ∈ Rn such that (6)-(9) hold true.
January 8, 2007
52
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A. Cernea
The proof can be found in Ref. 11. In particular, when Fij (., ., .) are expressed in the parametrized form Fij (xij−1 , xi−1j , xi−1j−1 ) = fij (xij−1 , xi−1j , xi−1j−1 , Uij ),
(10)
where Uij ⊂ Rmij are compact sets for 0 < i + j < 2N and F00 (0, 0, 0) = {x00 }, for a solution x of inclusion (2) and its corresponding control u = (u0 , u1 , ..., uN ), ui = (ui0 , ui1 , ..., uiN ), uij ∈ Uij , i = 0, 1, ..., N , j = 0, 1, ..., N we define ∂fij ∂fij A1ij = (xij−1 , xi−1j , xi−1j−1 , uij ), A2ij = (xij−1 , xi−1j , ∂xij−1 ∂xi−1j ∂fij xi−1j−1 , uij ), A3ij = (xij−1 , xi−1j , xi−1j−1 , uij ). ∂xi−1j−1 Corollary 3.1. Assume that the function fij (., ., ., uij ) is Lipschitz for every fixed uij ∈ Uij , the function fij (xij−1 , xi−1j , xi−1j−1 , .) is continuous for every fixed xij−1 , xi−1j , xi−1j−1 and the function fij (., ., ., uij ) is differentiable at (xij−1 , xi−1j , xi−1j−1 ). Let x = (x0 , x1 , ..., xN ) ∈ SF be an optimal solution for problem (1)–(3), with Fij defined by (10), such that Hypothesis 1.1 is satisfied. Consider XN ⊂ Rn a closed set and g(.) : Rn → R a locally Lipschitz function. Then for any derived cone C1 of XN at xN N there exist q ∈ Rn and a solution pij ∈ Rn such that pij = (A1ij+1 )∗ pij+1 + (A2i+1j )∗ pi+1j + (A3i+1j+1 )∗ pi+1j+1 , 0 < i + j < 2n, pij = 0
for
i>N
or
j > N,
pN N ∈ λ∂C g(xN N ) − C1+ , hpij , xij i = min{hpij , vi ; v ∈ Fij (xij−1 , xi−1j , xi−1j−1 )}, 0 < i + j. N Denote by RQ the reachable set of the discrete inclusion
wij ∈Qxij Fij ((xij−1 , xi−1j , xi−1j−1 ); (wij−1 , wi−1j , wi−1j−1 )), i+j>0 w00 ∈ Qx00 F00 (0, 0, 0),
wij = 0
for i < 0 or j < 0.
(11)
2 Let y = (y 0 , y 1 , ..., y N ) satisfy (10) and let RQ denote the reachable set of the discrete inclusion vij ∈ Q2(xij ,y ) Fij ((xij−1 , xi−1j , xi−1j−1 ), (y ij−1 , y i−1j , ij
y i−1j−1 ); (vij−1 , vi−1j , vi−1j−1 )), v00 ∈ Q2(x00 ,y
00 )
F00 (0, 0, 0),
i + j > 0,
vij = 0
for i < 0 or j < 0.
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Hyperbolic Discrete Inclusions
53
In the next result we obtain second-order necessary optimality conditions for problem (1)–(3). Theorem 3.3. Assume that Hypothesis 1.1 is satisfied, let g(.) : Rn → R be a locally Lipschitz function, let A0 ⊂ Qx00 F00 (0, 0, 0) be a closed convex cone, let x = (x0 , x1 , ..., xN ) ∈ SF be an optimal solution for problem (1)–(3) and assume that the following constraint qualification is satisfied {−q ∈ Rn ;
∃ u1ij , u2ij , u3ij ∈ Rn
such that
(u1ij , u2ij , u3ij ) ∈
(Cxij Fij ((xij−1 , xi−1j , xi−1j−1 ); (., ., .)))∗ (u1ij+1 + u2i+1j + u3i+1j+1 ), i, j = 0, 1, ..., N,
0 < i + j < 2N,
(u1N N , u2N N , u3N N )∈(CxN N FN N ((xN N −1 , xN −1N , xN −1N −1 ); (., ., .)))∗ (q), + u101 + u210 + u311 ∈ A+ 0 } ∩ (CxN N XN ) = {0}. Then we have the first-order necessary condition D↑ g(xN N ; yN N ) ≥ 0
N ∀ yN N ∈ RQ ∩ QxN N XN .
Furthermore, if equality holds for some y N N , then we have the second-order necessary condition D↑2 g(xN N , y N N ; wN N ) ≥ 0
2 ∀ wN N ∈ RQ ∩ Q2(xN N ,yN N ) XN .
The proof, that can be found in Ref. 12, is based on a general (abstract) optimality condition formulated by Zheng13 and use also several first and second-order approximations of the reachable set RFN at xN N (Ref. 12). References 1. M.R. Hestenes, Calculus of Variations and Optimal Control Theory, (Wiley, New York, 1966). 2. S ¸ . Miric˘ a, New proof and some generalizations of the Minimum Principle in Optimal Control, J. Optim. Theory Appl., 74 (1992), 487–508. 3. V.G. Boltjanskii, Optimal Control for Discrete Systems, (Nauka, Moskow, 1973). 4. A.G. Kusraev, Discrete maximum principle, Math. Notes, 34 (1984), 617– 619. 5. V.N. Phat, Controllability of nonlinear discrete systems without differentiability assumption, Optimization, 19 (1988), 133–142. 6. A.I. Propoi, The maximum principle for discrete control systems, Automat. Remote Control, 26 (1965), 451–461. 7. R. Pytlak, A variational approach to discrete maximum principle, IMA J. Math. Control and Information, 9 (1992), 197–220.
January 8, 2007
54
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A. Cernea
8. N.D. Yen and T. C. Dien, On local controllability of nondifferentiable discrete time systems with nonconvex constraints on control, Optimization, 20 (1989), 889–899. 9. H.D. Tuan and Y. Ishizuka, On controllability and maximum principle for discrete inclusions, Optimization, 34 (1995), 293–316. 10. A. Cernea, Minimum Principle for a class of discrete inclusions, Math. Reports, 8(58) (2006), to appear. 11. A. Cernea, Minimum principle and controllability for multiparameter discrete inclusions via derived cones, Discrete Dynamics in Nature and Society, 2006 (2006), ID 96505, 1–12. 12. A. Cernea, An approach to second-order necessary conditions for multiparameter discrete inclusions, Revue Roum. Math. Pures Appl., to appear. 13. H. Zheng, Second-order necessary conditions for differential inclusion problems, Appl. Math. Opt., 30 (1994), 1–14.
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
55
CONTROLLABILITY OF DAMPED SECOND-ORDER INITIAL VALUE PROBLEM FOR A CLASS OF DIFFERENTIAL INCLUSIONS WITH NONLOCAL CONDITIONS ON NONCOMPACT INTERVALS D.N. CHALISHAJAR Department of Applied Mathematics, Sardar Vallabhbhai Patel Institute of Tech., Gujarat University, Vasad-388306. Gujaratr State, India E-mail:
[email protected] In this short article, we investigate the controllability of damped second-order initial value problems for a class of differential inclusions with nonlocal conditions on unbounded real interval. We shall employ a theorem of Ma1 , which is an extension to multivalued maps on locally convex topological spaces, of Schaefer’s theorem. Example is provided to illustrate the theory. This work is motivated by the papers of Benchohra and Ntouyas2 and Benchohra, Gatsori and Ntouyas3 . Keywords: Controllability; Initial value problems; Convex multivalued map; Evolution Inclusion; Fixed point; Nonlocal conditions.
1. Introduction The IVP with nonlocal conditions is of significance since they have applications in many physical problems. For the importance of nonlocal conditions in different fields we refer to Ref. 4 and the references cited there in. Also, controllability of the second-order systems with local and nonlocal conditions has received much attention in the recent years. It is advantageous to treat the second-order abstract differential equations directly rather than to convert them to first-order system, (Fitzgibbon5 and Ball6 ). Fitzgibbon5 used the second-order abstract system for establishing the boundedness of solutions of the equation governing the transverse motion of an extensible beam. A useful tool for the study of abstract second-order equations is the theory of strongly continuous cosine families of operators (Refs. 7,8). Our aim in this paper is to obtain the sufficient conditions for the controllability of second-order initial value problems (IVP) for a class of damped
January 8, 2007
56
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
D.N. Chalishajar
differential inclusions with nonlocal conditions on noncompact intervals, whose existence was proved by Benchohra and Ntouyas9 . Consider the inclusion for the damped second-order system of the form y 00 (t) − Ay(t) ∈ Gy 0 (t) + Bu(t) + F (t, y(t), y 0 (t)), y(0) + g(y) = φ, y 0 (0) = y0 ,
(1)
where the state y(t) takes values in a real Banach space X with the norm k.k and the control u(.) is given in L2 (J, U ), a Banach space of admissible control function with U as a Banach space. B is a bounded linear operator from U to X, g : C(J, X) → X, φ : J → X, y0 ∈ X, J is an unbounded real interval. © A is a linear ªinfinitesimal generator of a strongly continuous cosine family C(t) : t ∈ R in a Banach space X. For the sack of simplicity we choose J = [0, +∞). Here G is bounded linear operator on X and F : J × X × X → 2X is a bounded, closed, convex multivalued map. The method we are going to use is to reduce the controllability problem of (1) to the search for fixed points of a suitable multivalued map on the Frechet space C(J, X). In order to prove the existence of fixed points, we shall rely on a theorem due to Ma1 , which is an extension to multivalued maps between locally convex topological spaces, of Schaefer’s theorem (Ref. 10). 2. Motivations The study of the dynamical buckling of the hinged extensible beam which is either stretched or compressed by axial force in a Hilbert space, can be modeled by the hyperbolic equation Z L ³ ´ ¯ ´ 2 ¯ ∂u ∂2u ∂4u ³ ¯ (ξ, t)¯2 dξ ∂ u + g ∂u , + − α + β (2) ∂t2 ∂t4 ∂t ∂x2 ∂t 0 where α, β, L > 0u(t, x) is the deflection of the point x of the beam at the time t, g is a nondecreasing numerical function, and L is the length of the beam. Equation (2) has its analogue in Rn and can be included in a general mathematical model ¢ ¡ 1 u00 + A2 u + M kA 2 uk2H Au + g(u0 ) = 0, (3) where A is a linear operator in a Hilbert space H, and M and g are real functions. Equation (2) was studied by Patcheu11 and (3) was studied by Matos and Pereira12 . These equations are the special cases of the following second order damped nonlinear differential equation in an abstract space u00 + Au + Gu0 = f (t, u, u0 ); u(0) = u0 , u0 (0) = u1 , where A, B are linear operators.
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Controllability of Differential Inclusions
57
3. Preliminaries In this section, we introduce notations, definitions, and preliminary facts from multivalued analysis which will be used throughout this paper. Let Jb be the compact real interval [0, b] (b ∈ N ). Let C(J, X) be the linear metric Frechet space of continuous functions from J into X with the metric (see Ref. 13) d(y, z) =
∞ X 2−b ky − zkb , 1 + ky − zkb
for each y, z ∈ C(J, X),
b=0
where
½
¾
kykb := sup ky(t)k : t ∈ Jb . Let B(X) denote the Banach space of bounded linear operators X into X with standard norm. A measurable function y : J → X is Bochner integrable if and only if kyk is Lebesgue integrable. Let L1 (J, X) denotes the Banach space of continuous functions y : J → X which are Bochner integrable normed by Z ∞ kykL1 = ky(t)kdt < ∞ for all y ∈ L1 (J, X). 0
U p denotes the neighbourhood of 0 in C(J, X) defined by n o U p := y ∈ C(J, X) : kykb < p . The convergence in C(J, X) is the uniform convergence in the compact intervals, i.e.yj → y in C(J, X) if and only if each b ∈ N, kyj − ykb → 0 in C(Jb , X) as j → ∞.M ⊆ C(J, X) is a bounded set if and only if there exists a positive function ξ ∈ C(J, R+ ) such that ky(t)k ≤ ξ(t)
for all t ∈ J
and all y ∈ M.
The Arzela-Ascoli theorem says that a set M ⊆ C(J, X) is compact if and only if for each b ∈ N , M is a compact set in the Banach space (C(Jb , X), k.kb ). ½ ¾ We say that one-parameter family
C(t) : t ∈ R
of bounded linear
operators in B(X) is a strongly continuous cosine family if and only if (1) C(0) = I, I is the identify operator on X; (2) C(t + s) + C(t − s) = 2C(t)C(s) for all s, t ∈ R; (3) The map t 7→ C(t)y is strongly continuous in t on R for each fixed y ∈ X.
January 8, 2007
58
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
D.N. Chalishajar
The strongly continuous sine family {S(t) : t ∈ R}, associated to the strongly continuous cosine family {C(t) : t ∈ R} is defined by Z t S(t)y = C(s)y ds, y ∈ X, t ∈ R. 0
Assume the following condition on A. (H1) A is the infinitesimal generator of a strongly continuous cosine family C(t), t ∈ R of bounded linear operators X into itself and the adjoint operator A∗ is densely defined i.e. D(A∗ ) = X ∗ (Ref. 14). The infinitesimal generator of a strongly continuous cosine family C(t), t ∈ R is the operator A : X → X defined by d2 C(t)y|t=0 , y ∈ D(A), dt2 where D(A) = {y ∈ X : C(t)y is twice continuously differentiable in t} i.e. Ay =
D(A) = {y ∈ X : C(.)y ∈ C 2 (R, X)}. Define X1 = {y ∈ X : C(t)y} is once continuously differentiable in t = {y ∈ X : C(.)y ∈ C 1 (R, X)}. For more details on strongly continuous cosine and sine family, we refer to the book of Goldstein15 and papers of Travis and Webb7,8 . We know that that if the multivalued map G1 : X → 2X is completely continuous with nonempty compact values, then G1 is u.s.c. if and only if G1 has a closed graph (i.e. xn → x0 , yn → y0 , yn ∈ G1 (xn ) imply y0 ∈ G1 (x0 )). We assume the following hypotheses: (H2) C(t), t > 0 is compact. (H3) t → B(u(t)) is continuous in t. (H4) The linear operator W : L2 (J, U ) → X defined by Z b Wu = S(t − s)Bu(s)ds 0
f −1 which takes the values in induces a bounded invertible operator W 2 f L (Jb , U )\ ker W, (for construction of W −1 , see Ref. 4), and there exist f −1 k ≤ M3 . positive constants M2 and M3 such that kBk ≤ M2 and kW 0 0 (H5) F : J × X × X → BCC(X); (t, y, y ) 7→ F (t, y, y ) is measurable with respect to t for each y ∈ X, u.s.c. with respect to y, for each t ∈ J and for each fixed y ∈ C(J, X) and z ∈ C(J1 , X) the set SF,y,z = {v ∈ L1 (J, X) : v(t) ∈ F (t, y(t), y 0 (t)) for a.e. t ∈ J} is nonempty.
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Controllability of Differential Inclusions
59
(H6) There exists a constant L such that kg(y)k ≤ L,
for y ∈ X.
(H7) kF (t, y, z)k = sup{kvk : v ∈ F (t, y, z)} ≤ p(t)ψ(kyk + ky 0 k) for almost all t ∈ J and all y ∈ X, where p ∈ L1 (J, R+ ) and ψ : R+ → (0, ∞) is continuous and increasing with Z b Z ∞ ds = ∞, for each b > 0, p(s)ds < s + ψ(s) 0 c where c = (M1 + M1∗ )[kφ(0)k + L] + kGkky(t)k + h i + (1 + b) M1 ky(0)k + M1 N b + M1 kGkkφ(0)k n o M1 = sup kC(t)k : t ∈ J , M1∗ = sup{kAS(t)k : t ∈ J} h N = M2 M3 ky1 k + (M1 + M1 b + kGk)kφ(0)k + M1 L + M1 bky0 k Z t Z b i + M1 kGk ky(s)kds + M1 b p(s)ψ(ky(s)k + ky 0 (s)k)ds . 0
0
2
(H8) For fixed u ∈ L (J, X), each neighbourhood U p of 0, y ∈ U p and t ∈ J, the set Z t {C(t) − S(t)G}φ(0) − C(t)g(y) + S(t)y0 + C(t − s)Gy(s)ds 0 Z t Z t + S(t − s)Bu(s)ds + S(t − s)v(s)ds; v ∈ SF,y,y0 } 0
0
is relatively compact. A mild solution of the system (1) is given by Ref. 14, Z t y(t) = {C(t) − S(t)G}φ(0) − C(t)g(y) + S(t)y0 + C(t − s)Gy(s)ds 0 Z t Z t + S(t − s)Bu(s)ds + S(t − s)v(s)ds, (4) 0
0 1
where v ∈ SF,y,y0 = {v ∈ L (J, X) : v(t) ∈ (F (t, y(t), y 0 (t)) for a.e. t ∈ J}. Definition 3.1. System (1) is said to be infinite controllable on J=[0, ∞) if for every φ(0)∈D(A), y0 ∈X1 and y1 ∈ X, there exists a control u∈L2 (Jb , U ) such that the mild solution y(.) of (1) satisfies y(b) + g(y) = y1 . The following lemmas will be used in the proof of our main theorem.
January 8, 2007
60
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
D.N. Chalishajar
Lemma 3.1. (Ref. 17) Let I = Jb be a compact real interval and X be a Banach space. Let F be a multivalued map satisfying (H5) and let Γ be a linear continuous mapping from L1 (I, X) to C(I, X), then the operator ΓoSF : C(I, X) → BCC(C(I, X))
y → (ΓoSF )(y) := Γ(SF,y )
is a closed graph operator in C(I, X) × C(I, X). Lemma 3.2. (Ref. 1) Let X be a locally convex space and N1 : X → 2X be a compact convex valued, u.s.c. multivalued map such that there exists a closed neighbourhood U p of 0 for which N1 (U p)is a relatively compact set for each p ∈ N . If the set ½ Ω :=
¾ y ∈ X : λy ∈ N1 (y)
for some λ > 1
is bounded, then N1 has a fixed point. 4. Main Result We now state and prove our main controllability result. Theorem 4.1. Assume that the hypotheses (H1 )–(H8 ) are satisfied. Let g : C(J, X) → X be a continuous function. Then the system (1) is controllable on J. Proof. For fixed b ∈ N consider the space Z = C 1 (J, X) with norm kykz = max{kyk, ky 0 k, t ∈ J}. Using the hypothesis (H5) for an arbitrary function y(·), we define the control " f −1 y1 − {C(b) − S(b)G}φ(0) + C(b)g(y) − S(b)y0 uby (t) = W Z
Z
b
−
C(b − s)Gy(s)ds − 0
b
# S(b − s)v(s)ds (t).
0
Using this control we shall show that the operator N1 : Z → 2Z defined by
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Controllability of Differential Inclusions
61
N1 y := h ∈ C(J, X) : h(t) Z t {C(t) − S(t)G}φ(0) − C(t)g(y) + S(t)y0 + C(t − s)Gy(s)ds 0 Z t h f −1 y1 − {C(b) − S(b)G}φ(0) + C(b)g(y) − S(b)y0 S(t − η)B W + =
0
Z b Z b i − C(b − s)Gy(s)ds − S(b − s)v(s)ds (η)dη 0 0 Z t + S(t − s)v(s)ds : v ∈ SF,y,y0 ; t ∈ J, 0
where
n o v ∈ SF,y,y0 = v ∈ L1 (J, X) : v(t) ∈ F (t, y(t), y 0 (t))for a.e. t ∈ J ,
has a fixed point. This fixed point is then a solution of equation (4). Clearly y1 − g(y) ∈ (N1 y)(b), which means that the control u steers the system from initial state φ(0) to y1 in time b, provided we obtain a fixed point of the nonlinear operator N1 . In order to study the controllability problem for system (1), we apply fixed point theorem due to Ma1 to the following system: y 00 (t)∈λ−1 Ay(t)+λ−1 Bu(t)+λ−1 Gy 0 (t)+λ−1 F (t, y(t), y 0 (t)), y(0) + g(y) = φ, y 0 (0) = y0 , t ∈ J.
(5)
Let y be a mild solution of system (5). Then for some λ ∈ (0, 1), y(t) = λ−1 {C(t) − S(t)G}φ(0) − λ−1 C(t)g(y) Z t +λ−1 S(t)y0 + λ−1 C(t − s)Gy(s)ds Z +λ−1
0
t
h f −1 y1 − {C(b) − S(b)G}φ(0) + C(b)g(y) S(t − η)B W
0
Z
C(b − s)Gy(s)ds −
−S(b)y0 − Z +λ−1
Z
b 0
b
(6)
i S(b − s)v(s)ds (η)dη
0
t
S(t − s)v(s)ds, v ∈ SF,y,y0 ; t ∈ J. 0
We shall show that N1 (Uq ) is relatively compact for each neighbourhood Uq of 0 ∈ C(J, X) with q ∈ N and the multivalued map N1 has bounded, closed and convex values and it is u.s.c. The proof will be given in several steps.
January 8, 2007
18:38
62
WSPC - Proceedings Trim Size: 9in x 6in
icaade
D.N. Chalishajar
Step 1. The set Ω := {y ∈ C(J, X) : λy ∈ N1 (y), λ > 1} is bounded. For that we obtain a priori bounds for the equation (6). We have ky(t)kb ≤ (M1 + M1 bkGk)kφ(0)k + M1 L + M1 bky0 k Z t Z t 2 +M1 kGk ky(s)kds+M1 N b +M1 b p(s)ψ(ky(s)k + ky 0 (s)k)ds. 0
0
Denote by r1 (t) the R.H.S. of the above inequality, we have r1 (0) = (M1 + M1 bkGk)kφ(0)k + M1 L + M1 bky0 k + M1 N b2 andky(t)k ≤ r1 (t), t ∈ Jb . Using the increasing character of ψ, we get r10 (t) ≤ M1 kGkky(t)k + M1 bp(t)ψ(ky(t)k + ky 0 (t)k). But
h i y 0 (t) = λ (AS(t) − C(t)G)φ(0) − AS(t)g(y) + C(t)y0 + Gy(t) Z t + AS(t − s)Gy(s)ds Z t h 0 f −1 y1 − {C(b) − S(b)G}φ(0) + C(b)g(y) − S(b)y0 +λ C(t − η)B W 0 Z b Z b Z t i − C(b − s)Gy(s)ds − S(b − s)v(s)ds (η)dη + λ C(t − s)v(s)ds. 0
0
0
Thus we have ky 0 (t)kb ≤ (M1∗ + M1 bkGk)kφ(0)k + M1∗ L + M1 ky0 k + kGkky(t)k Z t Z t +M1∗ kGk ky(s)kds + M1 N b + M1 b p(s)ψ(ky(s)k + ky 0 (s)k)ds. 0
0
Denote by r2 (t) the R.H.S. of the above inequality, we have r20 (t) ≤ kGkky 0 (t)k + M1∗ kGkky(t)k + M1 p(t)ψ(ky(t)k + ky 0 (t)k) and ky 0 (t)k ≤ r2 (t); t ∈ J. Let w(t) = r1 (t) + r2 (t), then c = w(0) = r1 (0) + r2 (0) = (M1 + M1∗ )[kφ(0)k + L] + kGkky(t)k h i +(1 + b) M1 ky(0)k + M1 N b + M1 kGkkφ(0)k .
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Controllability of Differential Inclusions
63
Also, 0 0 w0 (t) h = r1 (t) + r2 (t)
i ≤ (M1 + M1∗ )ky(t)k + ky 0 (t)k kGk + (1 + b)[M1 p(t)ψ(ky(t)k + ky 0 (t)k) ≤ (M1 + M1∗ )kGkr1 (t) + kGkr2 (t) + (1 + b)[M1 p(t)ψ(r1 (t) + r2 (t)) ³ ´ = pb(t) w(t) + ψ(w(t)) , t ∈ J, where pb(t) = max{(1 + b)M1 p(t), (M1 + M1∗ )kGk, kGk}. This implies that for each t ∈ Jb Z ∞ Z w(t) Z b ds ds pb(s)ds < ≤ = ∞. s + ψs s + ψs 0 c c This inequality implies that there exists a constant K such that r1 (t) + r2 (t) = w(t) ≤ K, t ∈ Jb . Then kykz = max{ky(t)k, ky 0 (t)k)} ≤ K, where K depends only on b and on the functions p and ψ. This shows that Ω is bounded. Step 2. N1 y is convex for each y ∈ C(J, X). Indeed if h1 , h2 ∈ N1 y then there exist v1 , v2 ∈ SF,y,y0 such that for each t ∈ J, let 0 ≤ α ≤ 1 we have (αh1 + (1 − α)h2 )(t)
Z
t
= {C(t) − S(t)G}φ(0) − C(t)g(y) + C(t − s)Gy(s)ds + S(t)y0 0 Z t + S(t − s)[αv1 (s) + (1 − α)v2 (s)]ds Z0 t h f −1 y1 − {C(b) − S(b)G}φ(0) − C(b)g(y) + S(t − η)B W 0 Z t Z b i +S(b)y0 + C(t−s)Gy(s)ds − S(b − s)αv1 (s) + (1−α)v2 (s)ds (η)dη. 0
0
Since SF,y,y0 is convex as F is convex, then v = αh1 + (1 − α)h2 ∈ SF,y,y0 and hence αh1 + (1 − α)h2 ∈ N1 y. Step 3. N1 (Uq ) is bounded in C(J, X) for each q ∈ N . Indeed, it is enough to show that there l1 ½ exists a positive constant ¾ such that for each h ∈ N1 y, y ∈ Uq = y ∈ Z : kyk∞ ≤ q , one has
January 8, 2007
18:38
64
WSPC - Proceedings Trim Size: 9in x 6in
icaade
D.N. Chalishajar
khk∞ ≤ l1 . In other words, we have to bound the sup-norm of both h and h0 . If h ∈ N1 y, then there exists v ∈ SF,y,y0 such that for each t ∈ Jb we have Z t h(t) = {C(t) − S(t)G}φ(0) − C(t)g(y) + S(t)y0 + C(t − s)Gy(s)ds 0 Z t Z t h f −1 y1 − {C(b) − S(b)G}φ(0) + S(t − s)v(s)ds + S(t − η)B W 0 0 Z b Z b i + C(b)g(y) − S(b)y0 − C(b − s)Gy(s)ds − S(b − s)v(s)ds (η)dη. 0
0
By (H4), (H6) and (H7), we have for each t ∈ Jb that Z
t
kh(t)kb ≤ (M1 + M1 bL)kφ(0)k + M1 L + M1 bky0 k + M1 kGk ky(s)kds 0 µZ ¶ Z t t ³ ´ h +M1 b sup ψ ky(t)k + ky 0 (t)k p(s)ds + kS(t − η)kM2 M3 ky1 k t∈[0,q] 0 0 Z b +(M1 + M1 bL)kφ(0)k + M1 L + M1 bky0 k + M1 kGk ky(s)kds 0 ÃZ ! b ³ ´ i +M1 b sup ψ ky(t)k + ky 0 (t)k p(s)ds dη. t∈[0,q]
0
Then for each h ∈ N1 (Uq ) we have khk∞ ≤ l1 . Also, kh0 (t)kb ≤ (M1∗ + M1 L)kφ(0)k + M1∗ kg(y)k Z t +M1 ky0 k + kGkky(t)k + M1∗ bkGk ky(s)kds 0
h +M1 M2 M3 b ky1 k + (M1 + M1 bL)kφ(0)k + M1 kg(y)k + M1 bky0 k Z +M1 kGk 0
+M1
b
³ ´³ Z ky(s)kds + M1 b sup ψ ky(t)k + ky 0 (t)k t∈[0,q]
b
´i p(s)ds
0
¶ ³ ´ µZ t 0 sup ψ ky(t)k + ky (t)k p(s)ds . t∈[0,q]
0
Then for each h ∈ N1 (Uq ) we have kh0 k∞ ≤ l2 . Step 4. N1 (Uq ) is equicontinuous sets of Uq ∈ Z for each q ∈ N . That is the family h ∈ N1 y : y ∈ Uq is equicontinuous. Let t1 , t2 ∈ Jb , 0 < t1 < t2 < b and Uq be a neighbourhood of 0 in Z for q ∈ N . For each y ∈ Uq and h ∈ N1 y, we have
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Controllability of Differential Inclusions
65
kh(t1 ) − h(t2 )k ≤ kC(t1 )φ(0) − C(t2 )φ(0)k + kC(t1 ) − C(t2 )kkGk + kS(t1 )y0 − S(t2 )y0 k Z b Z b Z t2 +M1 (t1 − t2 ) kGkky(s)k + M1 (t1 − t2 ) kv(s)kds + M1 b kv(s)kds 0 t1 Z0 b h £ ¤ +M1 (t1 − t2 ) M2 M3 ky1 k + M1 kφ(0)k + kGk + bky0 k + bkGkkφ(0)k 0 Z b Z t2 Z b i kGkky(s)kds + M1 b kv(s)kds dη + M1 b +M1 M2 M3 [ky1 k 0
0
t1
+M1 [kφ(0)k + kGk + bky0 k + bkGkkφ(0)k] Z b Z b +M1 kGkky(s)kds + M1 b kv(s)kds]dη. 0
0
By using (H6), (H7) and continuity of C(t) and S(t), we see that the right-hand side of the above inequality tends to zero as (t2 − t1 ) −→ 0. The compactness of C(t), S(t) for t > 0 implies the continuity in the uniform operator topology. The compactness of S(t) follows from that of C(t). In an analogous way one can obtain a similar estimate for kh0 (t1 ) − h0 (t2 )k. Thus N1 (U q) maps U q into an equicontinuous family of functions. It is easy to see that the family N1 (U q) is uniformly bounded. The above estimate implies the required equicontinuity. This also proves the relative compactness of N1 (Uq ). Now it remains to prove the uppersemicontinuity (u.s.c.) of N1 . Equivalently, it is enough to prove that N1 has a closed graph. We do this in the next step using Lemma 3.1. Step 5. N1 has a closed graph. Let yn −→ y ∗ , hn −→ h∗ and hn ∈ N1 (yn ). We shall prove that h∗ ∈ N1 y ∗ . Since hn ∈ N1 (yn ) means that there exists vn ∈ SF,yn ,yn0 such that Z t Z t f −1 hn (t)=C(t)[φ(0)−g(yn )]+S(t)y0 + S(t−s)vn (s)ds + S(t−η)B W 0 0 Z b h £ ¤ ¤ y1 − g(y) − C(b) φ(0) − g(yn ) − S(b)y0 − S(b − s)vn (s)ds (η)dη. 0
We must prove that there exists v ∗ ∈ SF,y∗ such that
January 8, 2007
66
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
D.N. Chalishajar
Z t £ ¤ h∗ (t) = C(t) φ(0) − g(y ∗ ) + S(t)y0 + S(t − s)v ∗ (s)ds 0 Z t h f −1 y1 − g(y) − C(b)[φ(0) − g(y ∗ )] − S(b)y0 + S(t − η)B W Z0 b i − S(b − s)v ∗ (s)ds (η)dη.
(7)
0
Then the idea is to use the facts (1) hn −→ h∗£; ¤ (2) hn − C(t) φ(0) − g(yn ) − S(t)y0 ∈ Γ(SF,yn ), where Γ : L1 (J, X) −→ C(J, X), defined by Z t Z t f −1 (Γv)(t) = S(t − s)v(s)ds + S(t − η)B W 0 0 Z b h i £ ¤ y1 − g(y) − C(b) φ(0) − g(y) − S(b)y0 − S(b − s)v(s)ds (η)dη 0
If Γ ◦ SF is a closed graph operator, we would be done. But we do not know whether Γ ◦ SF is a closed graph operator. So we cut the functions yn , hn − C(t)φ(0) + C(t)g(yn ) − S(t)y0 , gn and we consider them defined on the interval [k, k + 1] for any k ∈ N ∪ {0}. Then, using Lemma 3.1, in this case we are able to affirm that (7) is true on the compact interval [k, k + 1], i.e. Z t Z t ∗ ∗k ∗ h (t)|[k,k+1] =C(t)[φ(0)−g(y )]+S(t)y0 + S(t−s)v (s)ds + S(t−η) 0 0 Z b h i −1 ∗ ∗k f BW y1 −g(y)−C(b)[φ(0)−g(y )]−S(b)y0 − S(b−s)v (s)ds (η)dη. 0 ∗k
1
∗
for a suitable L − selection v of F (t, y (t)) on the interval [k, k + 1]. k At this point we can paste the functions v ∗ obtaining the selection v ∗ defined by k
v ∗ (t) = v ∗ (t),
for t ∈ [k, k + 1).
We obtain then that v ∗ is an L1 − selection and (7) will be satisfied. We give now the details. Clearly we have that °¡ ¢ ¡ ¢° ° ° ° hn −C(t)φ(0)+C(t)g(yn )−S(t)y0 − h∗ −C(t)Φ(0)+C(t)g(y ∗ )−S(t)y0 °
∞
−→ 0 as n −→ ∞. Now, we consider for all k ∈ N ∪ {0}, the mapping SFk : C([k, k + 1]; X) −→ L1 ([k, k + 1]; X)
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Controllability of Differential Inclusions
67
n o ¡ ¢ k u 7→ SF,u := f ∈ L1 [k, k+1]; X : f (t) ∈ F (t, u(t)) for a.e. t ∈ [k, k+1] . Also, we consider the linear continuous operators Γk : L1 ([k, k + 1], X) −→ C([k, k + 1]; X) Z v 7→ Γk (v)(t) =
Z
t
S(t − s)v(s)ds + 0
t
f −1 S(t − η)B W
0
Z h y1 − g(y) − C(b)[φ(0) − g(y)] − S(b)y0 −
b
i S(b − s)v(s)ds (η)dη.
0
Γk oSFk
From Lemma 3.1, it follows that is a closed graph operator for all k ∈ N. Moreover, we have that ³ ´ k hn (t) − C(t)φ(0) + C(t)g(yn ) − S(t)y0 |[k,k+1] ∈ Γk (SF,y ). n Since yn −→ y ∗ , it follows from Lemma 3.1 that ³ ´ h∗ (t) − C(t)φ(0) + C(t)g(y ∗ ) − S(t)y0 |[k,k+1] Z t Z t h k f −1 y1 −g(y)−C(b)[φ(0)−g(y ∗ )] = S(t−s)v ∗ (s)ds+ S(t−η)B W 0 0 Z b i ∗k −S(b)y0 − S(b−s)v (s)ds (η)dη 0 k
k ∗ for some v ∗ ∈ SF,y defined on J by ∗ . So the function v k
v ∗ (t) = v ∗ (t),
for t ∈ [k, k + 1)
is in SF,y∗ , since v ∗ (t) ∈ F (t, y ∗ (t)) for a.e. t ∈ J. Set X := C(J, X). As a consequence of Lemma 3.2, we deduce that N1 has a fixed point (in Z). This means that any fixed point of N1 is a mild solution of (1) on J satisfying (N1 y)(t) = y(t). Thus, system (1) is controllable on J. ¤ References 1. T.W. Ma, Topological degrees for set-valued compact vector fields in locally convex spaces, Dissertationess Math., 92 (1972), 1–43. 2. M. Benchohra and S.K. Ntouyas, Controllability for an infinite time horizone of second order differential inclusions in Banach spaces with nonlocal condition, J. Opt. Theory and Appl., 109, (2001), 85–98. 3. M. Benchohra, E.P. Gatsori and S.K. Ntouyas, Nonlocal quasilinear Damped Differential Inclusions, Electronic J. of Diff. Equations., 2002 (2002), 1–14.
January 8, 2007
68
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
D.N. Chalishajar
4. Byszewski, L., Theorems about the existence and uniqueness of solution of semilinear evolution nonlocal Cauchy problem, J. Math. Anal. Appl., 162 (1991), 494–505. 5. W.E. Fitzgibbon, Global existence and boundedness of solutions to the extensible beam equation, SIAM J. Math. Anal., 13 (1982), 739–745. 6. J. Ball, Initial boundary value problems for an extensible beam, J. Math. Anal. Appl., 42 (1973), 61–90. 7. C.C. Travis and G.F. Webb, Cosine families and abstract nonlinear secondorder differential equations, Acta Math. Acad. Sci. Hung., 32 (1978), 75–96. 8. C.C. Travis and G.F. Webb, Second-order differential equations in Banach spaces, (Proc. Int. Symp. on Nonlinear Equations in Abstract spaces, Academic Press New-York, 1978), 331-361. 9. M. Benchohra and S.K. Ntouyas, Existence of mild solutions on noncompact intervals to second-order initial value problems for a class of differential inclusions with nonlocal conditions, Computers and Mathematics with Applications, 39 (2000), 11–18. 10. H. Schaefer, Uber die method der a priori Schranken, Math. Anal., 129 (1955), 415–416. 11. S.K. Patcheu, On the global solution and asymptotic behaviour for the generalized damped extensible beam equation, J. Differential Equations, 135 (1997), 299–314. 12. M. Matos and D. Periera, On a hyperbolic equation with strong damping, Funkcial. Ekvac., 34 (1991), 303–311. 13. J. Dugunji and A. Granas, Fixed Point Theory, (Monografic. Math. PWN. Warsaw, 1982). 14. J. Bochenek, An abstract nonlinear second-order differential equation, Annales Polonici Mathematici, 54 (1991), 155–166. 15. J.A. Goldstein, Semigroups of Linear Operators and Applications, (Oxford Univ. Press, New York, 1985). 16. A. Pazy, Semigroups of Linear Operators and Applications to Partial Differential Equations, (Springer-Verlag, New-York, 1983). 17. A. Lasota and Z. Opial, An application of the Kakutani-Ky-Fan theorem in the theory of ordinary differential equaitons, Bull. Acad. Polon. Sci. Ser. Sci. Math. Astronom. Phys., 13 (1965), 781–786.
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
69
AVERAGING OF EVOLUTION INCLUSIONS IN BANACH SPACES TZANKO DONCHEV Department of Mathematics University of Architecture and Civil Engineering 1 ”Hr. Smirnenski” str., 1046 Sofia, Bulgaria E-mail:
[email protected] We study semi-linear evolution inclusion in a Banach space E with uniformly convex dual E ∗ . Averaging and partial averaging results on a finite interval is proved, when A is linear m-dissipative and F , G are one sided Lipschitz. When F (t, ·) is one sided Lipschitz with negative constant we prove such results on an infinite interval. Keywords: Averaging; One sided Lipschitz; Evolution inclusions.
1. Preliminaries We study the following evolution inclusion: x(t) ˙ ∈ Ax + F (t, x) + εG(t, x), x(0) = x0 , t ∈ [0, ∞),
(1)
where A is densely defined linear operator with closed graph, generating a continuous semigroup. The multi-functions F (·, ·) and G(·, ·) are almost upper hemicontinuous with convex weakly compact values. The state space E is Banach with uniformly convex dual E ∗ . Through the paper we suppose F and G are bounded on the bounded sets. We denote by Sol(1) the solution set of (1). We refer to Refs. 1,2 for the theory of semilinear differential equations and inclusions in Banach spaces (see also Refs. 3,4). Further we assume that the following limit: Z 1 t+T G(τ, x) dτ G0 (x) = lim (A) T →∞ T t exists uniformly on the bounded subsets of E. Consider the averaged evolution inclusion: x(t) ˙ ∈ Ax + F (t, x) + εG0 (x), x(0) = x0 , t ∈ [0, ∞).
(2)
January 8, 2007
70
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
T. Donchev
We want to show that the Hausdorff distance between the solution set Sol(ε) of (1) and the solution set Sol0 (ε) of (2) converges to 0. This averaging principle is the main result of the paper. The problem (2) is often much simpler that the problem (1). This method is very comprehensively studied (in case A ≡ 0 and F ≡ 0) in the works of Plotnikov at al. We note Refs. 5–8 and the references therein. In Refs. 1,9 the averaging method is studied in case F ≡ 0. Our goal here is first to extend the averaging principle to the more general case (1)–(2) and also to replace the commonly used Lipschitz assumption on F and G with the weaker one sided Lipschitz. Let A : D(A) ⊂ E → E be closed densely defined linear operator, where E is a Banach space with uniformly convex dual E ∗ . We assume that A is m-dissipative, i.e. hJ(x), Axi ≤ 0 for every x ∈ D(A) and the range R(λI − A) = E for some (equivalently for any) λ > 0. With J(x) = {l ∈ E ∗ hl, xi = |x|2 = |l|2 } we denote the duality map. It is well known that J(·) is single valued and uniformly continuous on the bounded sets when E ∗ is uniformly convex (see e.g. Ref. 10). Denote by B the open unit ball in E. Let A, B ⊂ E be nonempty closed bounded. We let Ex(A, B) = sup inf |a − b| and DH (A, B) = max{Ex(A, B), Ex(B, A)}. a∈A b∈B
The family T (t) : E → E of bounded linear operators satisfying: 1) T (0) = I (the identity operator) 2) T (t + s) = T (t)T (s) = T (s)T (t), ∀t, s ≥ 0 3) t → T (t)x is continuous ∀x ∈ E is called C0 semigroup. The semigroup {T (t)}t≥0 is called compact when for every t > 0 and every bounded B the set T (t)B is compact. The densely defined linear operator A : D(A) → E is said to be an infinitesimal generator of a C0 (compact) semigroup {T (t)}t≥0 if lim +
∆t→0
T (∆t) − I x = Ax, ∀x ∈ D(A). ∆t
Let B ⊂ E be bounded for l ∈ E ∗ denote by σ(l, B) = sup hl, ai the a∈B
support function. Let M be a Banach space, the multifunction F :M⇒E is said to be upper hemicontinuous (UHC) when the support function σ(l, F (·)) is upper semicontinuous as a real valued function. It is easy to see that if F is bounded on the bounded sets with nonempty convex weakly compact values then F (·) is UHC if and only if its graph Graph(F ) is (M–strong) × (E–weak) closed. F : I × E ⇒ E is said to be almost UHC
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Averaging of Evolution Inclusions in Banach Spaces
71
if for every ε > 0 there exists Iε ⊂ I with meas(I \ Iε ) < ε such that F (·, ·) is UHC on Iε × E. Further we assume that F and G are bounded on [0, ∞) × B for every bounded B ⊂ E. Definition 1.1. The multifunction F : [0, T ] × E ⇒ E is said to be one sided Lipschitz (OSL) when there exists a constant L such that for every x, y ∈ E σ(J(x − y), F (t, x)) − σ(J(x − y), F (t, y)) ≤ L|x − y|2 . Definition 1.2. The continuous function y(·) is said to be mild solution of (1) when there exists a (strongly) measurable selection h(t) ∈ F (t, y(t)) + εG(t, y(t)) such that Z t y(t) = T (t)x0 + T (t − s)h(s) ds. 0
We will skip the word mild, i.e. the mild solutions will be called solutions. It is appropriate to check that the mild solutions (since A is linear) coincide with the integral solutions, i.e. x(0) = x0 and there exists a (strongly) measurable selection h of F + εG such that for every u ∈ D(A) and 0 ≤ s ≤ t: Z t |x(t) − u|2 ≤ |x(s) − u|2 + 2 hJ(x(τ ) − u), h(τ ) − Aui dτ. s
It is easy to see that h(t) = f (t) + εg(t), where f (t) ∈ F (t, x(t)) and g(t) ∈ G(t, x(t)) are (strongly) measurable. In the paper we study under some natural conditions the proximity between the solution sets of (1) and (2). This problem seems to be a particular case of the singularly perturbed problems (compare Ref. 11). However in our case the assumptions on F (·, ·) are weaker. 2. The Results In this section we prove the main results of the paper. First we prove the existence result when G(t, x) ≡ 0. Standing Hypotheses (SH): A1. A is densely defined closed m-dissipative linear operator, which is an infinitesimal generator of C0 semigroup. A2. A generates a compact semigroup.
January 8, 2007
18:38
72
WSPC - Proceedings Trim Size: 9in x 6in
icaade
T. Donchev
F1. F (·, ·) and G(·, ·) are almost UHC with nonempty convex weakly compact values, which satisfy the OSL condition with constants LF and LG respectively. Theorem 2.1. Under A1, F1 the differential inclusion: x(t) ˙ ∈ Ax + F (t, x(t)), x(0) = x0
(EI)
admits nonempty C([0, S], E) bounded closed set of (mild) solutions on every interval [0, S], where S > 0. Proof. The proof is the same as in the proof of Theorem 2.4 of Ref. 12 with only small obvious modifications. We have only to see that the solution set is uniformly bounded. So let x(·) be a solution. Due to A1, F1 we have that there exists a positive constant M such that |F (s, 0)| ≤ M ∀ s ∈ [0, S]. Further: Z t |x(t)|2 ≤ 2 (σ(J(x(s)), F (s, x(s))) − hJ(x(s)), A(0))ids 0 Z t ≤2 hσ(J(x(s) − 0), F (s, x(s))) − σ(J(x(s) − 0), F (s, 0)) 0
Z i.e. |x(t)|2 ≤ 2
t
¡
+σ(J(x(s)), F (s, 0)))i ds, ¢ L|x(s)|2 + M |x(s)| ds.
0
d |x(t)|2 ≤ 2L|x(t)|2 + 2M |x(t)| ≤ (2L + 1)|x(t)|2 + M 2 . dt The proof is complete thanks to Gronwall’s inequality. Thus
Denote by Sol(EI) the solution set of (EI). Corollary 2.1. Suppose A1, F1 are valid. If moreover, LF < 0 then lim+ DH (Sol(ε), Sol(EI)) = 0 with respect to the uniform metric in [0, ∞).
ε→0
Proof. For ε > 0 sufficiently small one has that the multifunction F (t, x) + εG(t, x) is OSL with negative OSL constant LF + εLG . It is standard to prove that since F and G are bounded on the bounded sets there exist constants K and M such that |x(t)| ≤ K and |F (t, x(t) + B)| + |G(t, x(t + B))| ≤ M . Let x(·) be a solution of (1). Then x(·) is a solution of x(t) ˙ = Ax + f (t) + εg(t), where f (t) ∈ F (t, x(t)) and g(t) ∈ G(t, x(t)). We define the following multifunction: H(t, y) = {u ∈ F (t, x) : hJ(x(t) − y), f (t) − ui ≤ LF |x(t) − y|2 .
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Averaging of Evolution Inclusions in Banach Spaces
73
It is easy to see that H(·, ·) is almost UHC. Let y(·) be a solution of y(t) ˙ ∈ Ay + H(t, y(t)), y(0) = x0 . From Theorem 1.2 in Ref. 12 (taken there from Ref. 13) we know that: Z t |x(t) − y(t)|2 ≤ 2 hJ(x(s) − y(s)), x(s) ˙ − y(s)i ˙ ds. 0
Z
t
2
Consequently |x(t) − y(t)| ≤ 2
Z
t
2
LF |x(s) − y(s)| ds + 2ε 0
σ(J(x(s) − 0
y(s)), G(s, x(s)))ds. However, there exists a constant M such that Z t |G(t, x(t))| ≤ M . Hence |x(t) − y(t)|2 ≤ 2 LF |x(t) − y(t)|2 + 0 Z t d |x(t) − y(t)|2 ≤ (2LF + M ε)|x(t) − 2ε M |(x(s) − y(s)|ds. Therefore dt 0 y(t)|2 + M ε. Since 2LF + M ε < 0 for sufficiently small ε, one has that |x(t) − y(t)|2 ≤ M ε. S1. There exists δ > 0 and a bounded set D ⊂ E such that the solution sets of (1) and (2) are contained in D for every ε < δ. Let K = |D|. For every x, y ∈ D one has |x − y| ≤ 2K. As it was pointed out the normalized duality map J(·) is uniformly continuous on 2KB. Denote by ΩJ (δ) := sup {|J(x) − J(y)| : |x| ≤ K, |y| ≤ K} its |x−u|≤δ
module of continuity. Further we need the following variant of Filippov–Pliss lemma. Lemma 2.1. Assume A1, A2, F1, S1 hold. Let η > 0 be given. Then there exists a constant C(ε) such that if x(·) is a solution of x(t) ˙ ∈ Ax(t) + F (t, x(t) + ηB) + εG(t, x(t) + ηB), x(0) = x0 , then there exists a solution y(·) of y(t) ˙ ∈ Ay(t) + F (t, y(t)) + εG(t, y(t)), y(0) = x0 , p such that |x(t) − y(t)| ≤ C(ε) η + ΩJ (η) on [0, ε−1 ]. If LF ≤ 0, then C does not depend on ε. Proof. It is easy to see that there exist strongly measurable functions |f˜(t)| < η and |˜ g (t)| < η such that x(t) ˙ ∈ Ax(t) + F (t, x(t) + f˜(t)) + εG(t, x(t) + g˜(t)), x(0) = x0 . Moreover there exist strongly measurable selections f (t) ∈ F (t, x(t) + f˜(t)) and g(t) ∈ G(t, x(t) + g˜(t)). Define the multi-maps F1 (t, z) := {v ∈ F (t, z) : hJ(x(t) − z), f (t) − vi ≤ LF |x(t) − x|2 }
January 8, 2007
74
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
T. Donchev
and G1 (t, z) := {v ∈ G(t, z) : hJ(x(t) − z), g(t) − vi ≤ LG |x(t) − x|2 }. It is easy to see that F1 (·, ·) and G1 (·, ·) are almost UHC with nonempty convex weakly compact values. Therefore there exist a solution y(·) of y(t) ˙ ∈ Ay(t) + F1 (t, y(t)) + εG1 (t, y(t)), y(0) = x0 . It it easy to see that there exist strongly measurable selections f1 (t) ∈ F1 (t, y(t)) and g1 (t) ∈ G1 (t, y(t)) such that y(t) ˙ = Ay(t) + f1 (t) + εg1 (t), y(0) = x0 . Consequently hJ(x(t) − y(t) + f˜(t)), f (t) − f1 (t)i ≤ LF |x(t) + f˜(t) − y(t)|2 and hJ(x(t) − y(t) + g˜(t)), g(t) − g1 (t))i ≤ LG |x(t) + g˜(t) − y(t)|2 . Therefore hJ(x(t) − y(t)), f (t) − f1 (t)i ≤ LF |x(t) − y(t)|2 +|J(x(t) − y(t)) − J(x(t) − y(t) + f˜(t))| (|f (t)| + |fi (t)|) ¯ ¯ ¯ ¯ + ¯LF |x(t) − y(t)|2 − LF |x(t) − y(t) + f˜(t)|2 ¯ ≤ LF |x(t) − y(t)|2 + 2M ΩJ (η) + |LF |(4K + η)η. Analogously, hJ(x(t) − y(t) + g˜(t)), g(t)−g1 (t))i ≤ LG |x(t)−y(t)|2 + d |x(t) − y(t)|2 ≤ 2M ΩJ (η) + |LG |(4K + η)η. Consequently, dt 2 2(LF + εLG )|x(t) − y(t)| + 4M (1 + ε)ΩJ (η) + 2(|LF | + ε|LG |)(4K + η)η. Therefore there exists a constant C(ε) such that |x(t) − y(t)| ≤ p d |x(t) − y(t)|2 ≤ C(ε) η + ΩJ (η) on [0, ε−1 ]. If LF ≤ 0, then dt 2εLG |x(t) − y(t)|2 + 4M (1 + ε)ΩJ (η) + 2(|LF | + ε|LG |)(4K + η)η. Due to Gronwall’s inequality in this case C does not depend on ε (on [0, ε−1 ]). Now we are ready to prove our main result: Theorem 2.2. Let LF ≤ 0. Under SH and S1 the solution sets R1 of (1) and R2 of (2) are nonempty and compact. Furthermore for every δ > 0 there exists ε(δ) > 0 such that for every 0 < ε ≤ ε(δ) one has DH (R1 , R2 ) ≤ δ on [0, ε−1 ]. Remark 2.1. It is assumed in Ref. 11 (for more general singularly perturbed problem) that LF < 0 (this assumption is crucial) which does not cover the classical case F (t, x(t)) ≡ 0. Here we permit LF = 0. Proof. Notice that the proof must be given only in case LF = 0. If LF < 0 Theorem 1.2 trivially follows from Corollary 2.1 (in this case S1 is redundant). Since A generates a compact semigroup, one has that R1 and R2 are
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Averaging of Evolution Inclusions in Banach Spaces
75
compact sets on [0, ε−1 ]. Furthermore the multifunction G0 (·) is also OSL with a constant LG . One can choose mε → ∞ with εmε → 0 as ε → 0 such 1 one has: that, denoting εmε µ ¶ Z 1 t+q G(s, x)ds = 0, [0, ε−1 ] × B. lim DH G0 (x), ε→0 q t Furthermore it is easy to see that for every δ > 0 there exists mε such that DH (Soli (ε, G), R1 ) < δ, as well as DH (Soli (ε, G0 ), R2 ) < δ. Here Soli (ε, G) is the solution set of x(t) ˙ ∈ Ax + F (t, x) + εG(t, xi ), xi = x(ti ), ti = iq, i = 1, . . . , [mε ]. Soli (ε, G0 ) is defined analogously, replacing G by G0 . Due to S1 every solution of (1) or (2) is uniformly continuous on [0, ∞). STEP 1. Let x(·) be a solution of (2) and let δ > 0 be given. There exists a strongly measurable selection g(t) ∈ G(x(t)) such that x(·) is a solution of x(t) ˙ = Ax(t) + F (t, x) + εg(t). i . εmε Let z(·) be a solution of z(t) ˙ ∈ Az+F (t, z)+εgi (t) such that z(ti ) = x(ti ) and gi (t) ∈ G0 (xi ) for i = 0, 1, · · · , mε . Due to S1 there exists M > 0 such that |F (t, x)| ≤ M and |G(x)| ≤ M on D for t ∈ [0, T ]. That is x(·) is uniformly continuous and hence for every δ > 0 one can choose ε and m that |x(t) − z(t)| ¯ ≤ δ. Moreover one can choose gi (·) such that ¯ εZsuch ¯ ¯ 1 ti+1 ¯ (gi (t) − g(t)) dt¯¯ < 2δ. Define the multifunction: ¯q Let mε be the numbers from the beginning of the proof. Denote ti =
ti
F˜ (t, u) := {v ∈ F (t, u) : σ(J(z(t) − u), F (t, z(t))) − hJ(z(t) − u), vi ≤ LF |z(t) − u|2 } Let fi (t) ∈ F˜ (t, z(t)) For i = 0, 2, · · · , mε define successively y(0) = x0 and y(t) ˙ = Ay + fi (t) + εgi (t)) for t ∈ [ti , ti+1 ]. Therefore |y(t) − z(t)| < 2δ. Hence |y(t) − x(t)| < 4δ. Consequently we have y(t) ˙ ∈ Ay(t) + F (t, y(t) + 4δB) + εG(t, y(t) + 4δB). Lemma 2.1 applies. Thus there exists a solution y˜(·) of (1) which is sufficiently closed to x(·) on [0, ε−1 ].
January 8, 2007
76
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
T. Donchev
STEP 2. Let y(·) be a solution of (1) and let δ > 0 be given. Let i . mε be the numbers from the beginning of the proof. Denote ti = εmε There exists a strongly measurable selection g˜(t) ∈ G(t, y(t)) such that y(t) ˙ ∈ Ay(t) + F (t, y(t)) + g˜(t), y(0) = x0 . Now one can continue as in the proof of previous step. Notice that Theorem 1.2 is not true for LF > 0: Example 2.1. Consider the following differential equation: ε x˙ = x + , x(0) = 0, t ≥ 0 t+1 ³ ´ with solution xε (t) ≥ ε2 et/ε−1 → ∞ as ε → 0 for every t > 0. The averaged system is: x˙ = x, x(0) = 0, t ≥ 0 with the only solution x(t) ≡ 0. When F ≡ 0 one can study the (asymptotic) behavior of x(t) ˙ ∈ Ax + εG(t, x), x(0) = x0
(DI)
x(t) ˙ ∈ Ax + εG0 (x), x(0) = x0 .
(ADI)
and respectively
In this case Theorem 1.2 has the form. Corollary 2.2. Under the conditions of Theorem 1.2 for every δ > 0 there exists ε(δ) > 0 such that for every 0 < ε ≤ ε(δ) one has DH (R(DI) , R(ADI) ) ≤ δ on [0, ε−1 ]. Theorem 2.3. Let all the assumptions of Theorem 1.2 hold. If LF < 0 then for any δ > 0 there exists ε(δ) > 0 such that for every 0 < ε ≤ ε(δ) one has DH (R1 , R2 ) ≤ δ on [0, ∞). Proof. The statements follows from Corollary 2.1. Remark 2.2. Theorems 1.2 and 2.1 hold true when (A) is replaced by lim DH (Graph(G0 ), Graph(GT )) = 0,
T →∞
where GT (x) = function G(·).
1 T
Z
t+T
G(τ, x) dτ and Graph(G) is the graph of the multit
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Averaging of Evolution Inclusions in Banach Spaces
77
Using the same fashion as in the proof of Theorem 1.2 one can prove the following Filatov–Hapaev type result (cf. ch. II of Ref. 14). Theorem 2.4. Assume A1, A2, F1, S1 hold with LF ≤ 0. Ã Z ! 1 t+T G(τ, x) dτ, G0 (x) 7→ 0 uniformly on x ∈ D and a) If lim Ex T →∞ T t if G0 (·) is OSL (G(·, ·) – not necessarily), then for every δ > 0 there exists ε(δ) > 0 such that for every 0 < ε ≤ ε(δ) one has Ex(R1 , R2 ) ≤ δ on [0, ε−1 ]. Ã ! Z 1 t+T G(τ, x) dτ 7→ 0 uniformly on x ∈ D and b) If lim Ex G0 (x), T →∞ T t if G(·, ·) is OSL (G0 (·) – not necessarily), then for every δ > 0 there exists ε(δ) > 0 such that for every 0 < ε ≤ ε(δ) one has Ex(R2 , R1 ) ≤ δ on [0, ε−1 ]. Proof. The proof of a) is the same as the proof of Step 1 of Theorem 1.2 and the proof of b) is the proof of Step 2. References 1. M. Kamenski, V. Obukhovskii, P. Zecca, Condensing Multivalued Maps and Semilinear Differential Inclusions in Banach Spaces, (De Gruyter, Berlin, 2001). 2. R. Martin, Nonlinear Operators and Differential Equations in Banach Spaces, (Willey, New York, 1976). 3. S. Hu, N. Papageorgiou, Handbook of Multivalued Analysis, vol. I Theory, Kluwer, 1997, vol. II Applications, (Kluwer, Dordrecht, 2000). 4. I. Vrabie, Compactness Methods for Nonlinear Evolutions, Second Edition, Pitman Monographs and Surveys in Pure and Applied Mathematics 75, (Longman, 1995). 5. V. Plotnikov, A. Plotnikov, A. Vityuk, Differential Equations with Multivalued Right–Hand Side. Asymptotic Methods (in Russian), (Astro Print, Odessa, 1999). 6. V. Plotnikov, V. Savchenko, About averaging of differential inclusions (in Russian), Ukr. Math. Journal, 48 (1996), 1572–1575. 7. T. Janiak, E. Luczak-Kumorec, Method of Averaging for IntegralDifferential Inclusions, Studia Univ. Babes Bolyai, Math., 39 (1994). 8. T. Zverkova, Ground of the averaging method when the Lipschitz condition is violated (in Russian), Ann. Higher Schools Sofia, 23 (1987), 41–48. 9. J. Couchouron, M. Kamenski, An abstract topological point of view and a general averaging principle in the theory of differential inclusions, Nonlinear Analysis, 42 (2000), 625–651.
January 8, 2007
78
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
T. Donchev
10. K. Deimling, Multivalued Differential Equations, (De Gruyter, Berlin, 1992). 11. T. Donchev, A. Dontchev, Singular perturbations in infinite-dimensional control systems, SIAM J. Control Optim., 42 (2003), 1795–1812. 12. T. Donchev, Multivalued perturbations of m-dissipative differential inclusions in uniformly convex spaces, New Zeland J. Math., 31 (2002), 19–32. 13. V. Lakshmikantham, S. Leela, Nonlinear Differential Equations in Abstract Spaces, (Pergamon, Oxford, 1981). 14. O. Filatov, M. Hapaev, Averaging of Systems of Differential Inclusions (in Russian), (Moskow University Press, Moskow, 1998). 15. N. Papageorgiou, Mild solutions of semilinear evolution inclusions, Indian J. Pure Appl. Math., 26 (1995), 189–216.
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
79
INFLUENCE OF VARIABLE PERMEABILITY ON VORTEX INSTABILITY OF A HORIZONTAL COMBINED FREE AND MIXED CONVECTION FLOW IN A SATURATED POROUS MEDIUM A.M. ELAIWa , F.S. IBRAHIMb and A.A. BAKRa a
Department of Mathematics, Faculty of Science, Al-Azhar University, Assiut, Egypt. E-mail: a m
[email protected]
b
Department of Mathematics, Faculty of Science, Assiut University, Assiut, Egypt.
A linear stability theory is used to analyze the vortex instability of combined free and mixed convection boundary layer flow in a saturated porous medium incorporating the variation of permeability and thermal conductivity due to paking particles with non-uniform temperature. Local Nusselt number for the base flow are presented for both uniform permeability (UP) and variable permeability (VP) cases. An implicit finite difference method is used to solve the base flow and the resulting eigenvalue problems are solved numerically. The critical Peclet and Rayleigh numbers and the associated wave number are obtained for both UP and VP cases. The results indicate that the inertia coefficients reduces the heat transfer rate and destabilizes the flow to the vortex mode of disturbance. The effect of variable permeability tends to increase the heat transfer rate and destabilize the flow to the vortex mode of disturbance. Keywords: Non Darcian; Vortex instability; Porous media; Variable permeability; Mixed convection; Free convection; Finite difference method.
Nomenclature A, m, n d, d
∗
constants in Eq. (7) and (9) constants defined in Eqs. (10) and (11)
f
dimensionless base state stream function
F
dimensionless disturbance stream function
g
gravitational acceleration
i
complex number
k
dimensionless wave number
January 8, 2007
18:38
80
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A.M. Elaiw, F.S. Ibrahim & A.A. Bakr
a
spanwise wave number
P
pressure
K
permeability of porous medium
N ux
local Nusselt number
Rax
local Rayliegh number
P ex
local Peclet number
F r, Re
Forchheimer coefficient numbers
T
fluid temperature
x, y, z
axial, normal and spanwise coordinates
u, v, w
volume averaged velocity in the x−, y−, z−direction
Greek symbols α
thermal diffusivity
β
volumetric coefficient of thermal expansion
ε
porosity of the saturated porous medium
η
similarity variable
θ
dimensionless base state temperature
Θ
dimensionless disturbance temperature
λf
thermal conductivity of the fluid
λs
thermal conductivity of the solid
λm
effective thermal conductivity of the saturated porous medium
µ
dynamic viscosity of the fluid
ρ
fluid density
σ
ratio of thermal conductivity of the solid to the fluid
ψ
stream function
Subscripts w
conditions at the wall
∞
conditions at the free stream
0
basic undisturbed quantities
1
disturbed quantities
Superscripts *
critical value
0
differentiation w.r.t η
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Vortex Instability of Free and Mixed Convection
81
1. Introduction The problem of the vortex mode of instability in mixed and free convection flow over a heated plate in a saturated porous medium have recently received considerable attention. This is primarily due to a large number of technical applications, such as fluid flow in geothermal reservoirs, separation processes in chemical industries, storage of radioactive nuclear waste materials, transpiration cooling, transport processes in aquifers, etc. The instability mechanism is due to the presence of a buoyancy force component in the direction normal to the plate surface. Hsu and Cheng1 analyzed the vortex mode of instability for a horizontal mixed convection boundary layer flow in a saturated porous media. Hsu et al.2 and Hsu and Cheng3 analyzed the vortex mode of instability of horizontal and inclined natural convection flows in a uniform porosity medium. Jang and Lie4 studied the vortex instability of mixed convection flow over horizontal and inclined surfaces in a porous medium, where both the streamwise and normal components of the buoyancy force are retained in the momentum equations. All of these investigations are based on the Darcy flow. However, at high flow rates or in porous media of high permeability, there is a departure from Darcy’s law and the inertia effects become significant. The non-Darcian effect on vortex instability of free or mixed convection flow was investigated by Refs. 5–9 and 10. All of the works mentioned above are based on the uniform permeability formulation with uniform porosity. In some applications, such as fixed-bed catalytic reactors, packed bed heat exchangers and drying, the porosity is not uniform but has a maximum value at the wall and a minimum value away from the wall. This wall-channeling phenomenon has been reported by a number of investigators such as Refs. 11–13 and 14. It is shown that the variable porosity effect increases the temperature gradient adjacent to the wall resulting in the enhancement of the surface heat flux. The effect of variable permeability on vortex instability of a horizontal free or mixed convection boundary layer flow in a saturated porous medium was studied by Refs. 15,16 and 17. Jang and Chen18 examined the effect of variable porosity and thermal dispersion on vortex instability of natural convection boundary layer flow adjacent to an isothermal horizontal surface in a porous medium. The aim of this paper is to study the effect of variable permeability on vortex instability combined free and mixed convection boundary layer flow over a horizontal heated plate in a saturated porous medium. This is accomplished by considering the Forchheimer extended Darcy equation of
January 8, 2007
82
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A.M. Elaiw, F.S. Ibrahim & A.A. Bakr
motion. The wall temperature is a power function of the distance from the origin. The permeability of the medium is assumed to vary exponentially with distance from the wall. The analysis of the disturbance flow is based on linear stability theory. The disturbance quantities are assumed to be in the form of a stationary vortex roll that is periodic in the spanwise direction, with its amplitude function depending primarily on the normal coordinate and weakly on the streamwise coordinate. The resulting eigenvalue problems are solved by using a finite difference scheme. 2. Analysis 2.1. The main flow Consider the problem of free or mixed convection flow along a horizontal surface embedded in a fluid saturated porous medium. Here, x represents the distance along the plate from its leading edge, and y the distance normal to the surface. The horizontal plate assumed to be heated in such a way that its surface temperature varies in the power-law form Tw = T∞ + Axm , where A is constant. For the mathematical analysis of the problem we assume that: 1) the fluid and the porous solid matrix are in local thermodynamic equilibrium; 2) the porous medium is everywhere isotropic and homogeneous; 3) the fluid properties are constant accept for the density in the buoyancy force term; 4) the Boussinesq approximation is employed; 5) Forchheimer’s non-Darcy model is used for the momentum equation. With these assumptions, the governing equations are given by ∂u ∂v + = 0, ∂x ∂y
(1)
√ K ∂P c K 2 u =− u+ , ν µ ∂x
(2)
√ µ ¶ K ∂P c K 2 v =− v+ + ρg , ν µ ∂y
(3)
u
∂T ∂T ∂ +v = ∂x ∂y ∂y
µ α
∂T ∂y
¶ ,
(4)
ρ = ρ∞ [1 − β(T − T∞ )]. Here u and v are velocities in the x and y directions, respectively; P is the pressure; T is the temperature; ρ is the fluid density; µ is the dynamic
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Vortex Instability of Free and Mixed Convection
83
viscosity; K is the permeability of the porous medium; g is the gravitational acceleration; β is the thermal expansion coefficient of the fluid and α represents the equivalent thermal diffusivity. Note that the second term on the left-hand side of equations (2) and (3) is the inertia force in Forchheimer’s model, c is the transport property related to the inertia effect. As c = 0, equations (2) and (3) reduce to Darcy model. The other symbols are defined in the nomenclature. The pressure terms appearing in equations (2) and (3) can be eliminated through cross-differentiation. The boundary layer assumption yields ∂/∂x ¿ ∂/∂y and v ¿ u. With ψ being a stream function such that u = ∂ψ/∂y and v = −∂ψ/∂x, the equations (1)–(4) become " Ã ! √ √ µ ¶2# Kρ∞ gβ ∂T 2c K ∂ψ ∂ 2 ψ 1 ∂ψ c K ∂ψ dK =− 1+ − + , (5) 2 ν ∂y ∂y K ∂y 2ν ∂y dy µ ∂x ∂ψ ∂T ∂ψ ∂T ∂2T dα ∂T − =α 2 + . ∂y ∂x ∂x ∂y ∂y dy ∂y
(6)
The boundary conditions are defined as follows ∂ψ = 0, T = Tw = T∞ + Axm , (7) ∂x ∂ψ = 0, T →T∞ (for free convection flow), (8) y→∞ u = ∂y ∂ψ y→∞ u = →U∞ = Bxn , T →T∞ (for mixed convection flow). (9) ∂y y=0 v=−
Here we consider that the porosity ε and permeability K vary exponentially from the wall (Ref. 12) ε = ε∞ (1 + de−y/γ ),
(10)
K = K∞ (1 + d∗ e−y/γ ),
(11)
where ε∞ and K∞ are the porosity and permeability at the edge of the boundary layer; d and d∗ are constants whose values are taken as 1.5 and 3 respectively, (see Chandrasekhara12 ). Further, α = λm /(ρ∞ cp )f also varies since it is related to the effective thermal conductivity of the saturated porous medium λm , where λm can be computed according to the following semi-analytical expression given by Nayagam et al19 : λm = ελf + (1 − ε)λs ,
(12)
January 8, 2007
84
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A.M. Elaiw, F.S. Ibrahim & A.A. Bakr
where λf and λs are the thermal conductivities of the fluid and solid respectively. Hence the expression for the thermal diffusivity has the form h ³ ´ i α = α∞ ε∞ 1 + de−y/γ + σ{1 − ε∞ (1 + de−y/γ )} , (13) where σ = λs /λf and α∞ = λf /(ρ∞ cp )f . 2.1.1. Free convection flow On applying the following transformations η(x, y) =
y 1/3 Ra , x x
ψ(x, y)
f (η) =
gβK∞ (T −T∞ )x is α∞ ν 1/3 x/Rax such that ε
where, Rax =
1/3 α∞ Rax
, θ(η) =
T − T∞ , Tw − T∞
(14)
the modified local Rayleigh number. We
and K are purely functions of η only. choose γ = Equations (5)–(9) can be nondimensionalized as follows ¸ i 00 G0 · 0 1 h 2/3 0 1/2 2m−1 2/3 0 2 1/2 2m−1 3 3 f + Fr f G x f − = 1 + 2F r f G x G 2 µ ¶ m−2 0 ηθ , − G mθ + (15) 3 µ
α α∞
¶
d θ + dη
µ
00
α α∞
η=0
¶ 0
0
θ = mf θ −
f = 0,
m+1 0 fθ , 3
θ = 1,
0
η → ∞ f = 0, θ = 0. 3/4
(16)
(17)
1/2
c3/2 gβK∞ Aα∞ is the Forchheimer number ν 5/2 expressing the relative importance of the inertia effects. The follow is governed by Darcy’s law when F r = 0. Obviously, equations (15) and (16) will be independent of x, if m = 0.5 that is, the surface temperature varies with x1/2 thus, equations (15)–(16) can be written in the form ¸ i 00 G0 · 0 1 h 0 0 0 1 f + Ref 2 G1/2 = − M G(θ − ηθ ), (18) 1 + 2Ref G1/2 f − G 2 2 where, G = (1+d∗ e−η ), F r =
µ
α α∞
¶ 00
θ +
d dη
µ
α α∞
¶ 0
θ =
´ 0 1³ 0 f θ − fθ , 2
(19)
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Vortex Instability of Free and Mixed Convection
85
with the boundary conditions η=0
f = 0, 0
η→∞
f = 0,
θ = 1, θ = 0.
(20)
In the above equations, the primes denote the derivatives with respect to η. 2.1.2. Mixed convection flow In this case we shall use the following transformations yp ψ(x, y) T − T∞ √ . P ex , f (η) = η(x, y) = , θ(η) = x Tw − T∞ α∞ P ex U∞ x x is the local peclet number. Here, we choose γ = √ . α P ex Equations (5)–(6) reduce to √ √ ¸ ¸ · 0 · 0 0 00 0 1 c K∞ G c K∞ Bxn f G1/2 f − f + Bxn f 2 G1/2 = 1+2 ν G 2 ν µ ¶ n−1 0 ηθ , − M G mθ + (21) 2
where, P ex =
µ ¶ 0 0 d α n+1 0 θ + θ = mf θ − fθ , (22) dη α∞ 2 √ µ ¶ Rax c K∞ U∞ where, M = is the mixed convection parameter, Re = 3/2 ν P ex is the Forchheimer coefficient dependent Reynolds number. It can be shown 3n + 1 . that the similarity solutions to equations (21)–(22) exist if m = 2 Obviously, equations (21) and (22) will be independent of x, if (n = 0, m = 0.5) that is, the surface temperature varies with x1/2 thus, equations (21)–(22) can be written in the form ¸ h i 00 G0 · 0 1 0 0 0 1 f + Ref 2 G1/2 = − M G(θ − ηθ ), (23) 1 + 2Ref G1/2 f − G 2 2 µ
α α∞
µ
¶
α α∞
00
¶ 00
θ +
d dη
µ
α α∞
¶ 0
θ =
´ 0 1³ 0 f θ − fθ , 2
(24)
with the boundary conditions η=0 η→∞
f = 0, 0
f = 1,
θ = 1, θ = 0.
(25)
January 8, 2007
18:38
86
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A.M. Elaiw, F.S. Ibrahim & A.A. Bakr
In terms of the new variables, it can be shown that the velocity components and the local Nusselt number are given by α∞ B 2 0 f x 0 α∞ B (f − ηf ) u(x, y) = − 2x 0 N ux = −Bθ (0) u(x, y) =
where, B =
√ 1/3 P ex for mixed convection and B = Rax for free convection.
2.2. The disturbance flow The standard linear stability method yields the following ∂v1 ∂w1 ∂u1 + + = 0, ∂x ∂y ∂z
(26)
√ K ∂P1 2c K u0 u1 = − u1 + , ν µ ∂x
(27)
√ µ ¶ K ∂P1 2c K v0 v1 = − v1 + − ρ∞ gβT1 , ν µ ∂y
(28)
w1 = −
K ∂P1 , µ ∂z
(29)
∂T1 ∂T1 ∂T0 ∂T0 ∂2T ∂ u0 + v0 + u1 + v1 =α 2 + ∂x ∂y ∂x ∂y ∂x ∂y
µ ¶ ∂T ∂2T α + α 2 , (30) ∂y ∂z
where the subscripts 0 and 1 signify the main flow and disturbance components, respectively. Following the method of order of magnitude analysis described in detail by Hsu and Cheng1 and Hsu et al.2 . The terms ∂u1 /∂x and ∂ 2 T1 /∂x2 in equations (26)–(30) can be neglected. The omission of ∂u1 /∂x in equation (26) implies the existence of a disturbance stream function Ψ1 , such as w1 =
∂Ψ1 , ∂y
v1 = −
∂Ψ1 . ∂z
(31)
Eliminating P1 from equations (27)–(29) with the aid of (31) leads to ! Ã √ ∂u1 ∂ 2 Ψ1 2c K u0 = , (32) 1+ ν ∂z ∂x∂y
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Vortex Instability of Free and Mixed Convection
! √ ∂ 2 Ψ1 2c K ∂ 2 Ψ1 1 dK ∂Ψ1 Kρ∞ gβ ∂T1 v0 − 1+ = − + , ν ∂z 2 ∂y 2 K dy ∂y µ ∂z
87
Ã
∂T1 ∂T1 ∂T0 ∂Ψ1 ∂T0 u0 + v0 + u1 − =α ∂x ∂y ∂x ∂z ∂y
µ
∂2T ∂2T + ∂y 2 ∂z 2
¶ +
(33)
dα ∂T . (34) ∂y ∂y
As in Hsu et al.1 , we assume that the three-dimensionless disturbances for neutral stability are of the form (Ψ1 , u1 , T1 ) = [Ψ(x, y), u(x, y), T (x, y)]eiaz ,
(35)
where a is the spanwise periodic wave number. Substituting equation (35) into equations (32)–(34) yields ! à √ ∂2Ψ 2c K u0 u = ia 1 + , (36) ν ∂x∂y à a2
! √ ∂2Ψ 2c K 1 dK ∂Ψ iaKρ∞ gβ v0 Ψ = T, 1+ − + ν ∂y 2 K dy ∂y µ
∂T0 ∂T0 ∂T ∂T u0 + v0 +u − iaΨ =α ∂x ∂y ∂x ∂y
µ
∂2T − a2 T ∂y 2
¶ +
dα ∂T . dy ∂y
(37)
(38)
Equations (36)–(38) are solved based on the local similarity approximation (see Ref. 20), wherein the disturbances are assumed to have weak dependence in the streamwise direction (i.e. ∂/∂x ¿ ∂/∂y), k=
ψ T ax , F (η) = , Θ(η) = , B iα∞ B Ax1/2
(39)
we obtain the following system of equations for the local similarity approximation: · 0 ³ ´¸ p 00 0 G 0 2 1/2 Re f − ηf F = −kSG P ex Θ, F −k 1−G F− (40) B G µ
α α∞
¶
·
µ
1 d Θ + f+ 2 dη 00
α α∞
¶¸
µ 0
Θ −
¶ 1 0 α 2 f + k Θ+ 2 α∞
00
(41)
F (0) = F (∞) = Θ(0) = Θ(∞) = 0.
(42)
0
0 η(ηθ − θ)F £ ¤ = kBθ F, + 0 1/2 4kB 1 + 2Ref G
subject the boundary conditions
January 8, 2007
88
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A.M. Elaiw, F.S. Ibrahim & A.A. Bakr
In the above equations S = M and S = 1for mixed and free convection, respectively. Equations (40) and (41) along with its the boundary condition (42) constitutes a second-order system of linear ordinary differential equations for the disturbance amplitude distributions F (η) and Θ(η). For fixed values of d, d∗ , ε∞ , σ, k and M , the solution F and Θ is an eigenfunction for the eigenvalue P ex or Rax .
3. Numerical Scheme In this section, we compute the approximate value of Rax and P ex for equations (40) and (41) with the boundary conditions (42). An implicit finite difference method is used to solve first the base flow and the results are stored for a fixed step size h, which is small enough to predict accurate linear interpolation between mesh point. The domain is 0 ≤ η ≤ η∞ , where η∞ is the edge of the boundary layer of the basic flow. For a positive integer N , let h = η∞ /N and ηi = ih, i = 0, 1, ..., N . The problem is discretized with standard centered finite differences of order two, following Usmani21 . Solving eigenvalue problem is achieved by using the subroutine GVLRG of the IMSL library, see Ref. 22.
4. Results and Discussion Numerical results for the local Nusselt number, neutral stability curves, the critical Rayleigh and Peclet and numbers and the associated wave numbers at the onset of vortex instability are presented for both uniform permeability (UP), i.e. d = d∗ = 0 and variable permeability (VP), i.e. d, d∗ 6= 0 cases. For the purpose of numerical integration we have assumed d = 1.5, d∗ = 3, σ = 2, ε∞ = 0.4 (see Ref. 12). Figures 1 and 2 show the effect of Forchheimer coefficient numbers F r and Re, the mixed convection parameter M and the varaible permeability on the local Nusselt number. As expected, the local Nusselt number decrease as F r or Re (inertia coefficient) increases. Further, at a given value of Re as M increases the local Nusselt number increases. From this figures, it can be seen that a large discrepancy in the results exists between the variable permeability and uniform permeability. The local Nusselt number, predicated by the variable permeability, are much higher than those by the uniform permeability.
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Vortex Instability of Free and Mixed Convection
89
January 8, 2007
90
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A.M. Elaiw, F.S. Ibrahim & A.A. Bakr
Figures 3 and 4 show the neutral stability curves, in terms of Rax and P ex and the dimensionless wave number k, for selected values of F r and Re, respectively, for both UP and VP cases. It is observed that, as F r and Re increases, the neutral stability curves shift to lower Rax and P ex , respectively. When the variable permeability effect is considered, the neutral
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Vortex Instability of Free and Mixed Convection
91
stability curves shift to lower Rayleigh and Peclet numbers and higher wave number k, indicating a destabilization of the flow. The critical Rayleigh and Peclet numbers Ra∗x , P e∗x and critical wave number k ∗ , which mark the onset of longitudinal vortices, can be found from the minima of the neutral stability curves. The critical wave number k ∗ and Rayleigh number Ra∗x are plotted as a function of F r in figures 5 and 6, respectively, for both UP and VP cases. We observe that, the critical Rayleigh number and critical wave number decrease as F r increase. The critical Peclet number and wave number are plotted as function of M for various values of Re in figures 7 and 8, respectively, for both UP and VP cases. We observe that, the critical Peclet number decreases and critical wave number increases as M increase. Also, we can see that, the critical Peclet number and critical wave number decrease as Re increase, indicating a destabilization of the flow to the vortex instability. Figures 5-8 show that the variable permeability effect tends to destabilize the flow to the vortex mode of disturbance. To assess the accuracy of our results, we have shown a comparison of our results with those Ref. 2 in the case of uniform permeability UP and darcy flow (i.e. F r = 0). A comparison of our results with those from the literature indicates that the agreement between the two calculations is good.
References 1. C.T. Hsu and P. Cheng, Vortex instability of mixed convection flow in a semiinfinite porous medium bounded by horizontal surface, Int. J. Heat Mass Transf., 23 (1980), 789–798. 2. C.T. Hsu, P. Cheng, P. and G.M. Homsy, Instability of free convection flow over a horizontal impermeable surface in a porous medium. Int. J. Heat Mass Transf., 21 (1978), 1221–1228. 3. C.T. Hsu and P. Cheng, The onset of longitudinal vortices in mixed convection flow over an inclined surface in a porous medium, J. Heat Transf., 102 (1980), 544-549. 4. J.Y. Jang and K.N. Lie, Vortex instability of mixed convection flow over horizontal and inclined surfaces in a porous medium,Int. J. Heat Mass Transf., 35 (1992), 2077–2085. 5. W.J. Chang and J.Y. Jang, Inertia effects on vortex instability of a horizontal natural convection flow in a saturated porous medium, Int. J. Heat Mass Transf., 32 (1989), 541–550. 6. K.N. Lie and J.Y. Jang, Boundary and inertia effects on vortex instability of a horizontal mixed convection flow in a porous medium, Numer. Heat Mass, A 23 (1993), 361–378. 7. J.Z. Zhao, T.S. Chen, Inertia effects on non-parallel thermal instability of
January 8, 2007
18:38
92
8.
9.
10.
11. 12.
13.
14.
15.
16.
17.
18.
19.
20. 21.
22.
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A.M. Elaiw, F.S. Ibrahim & A.A. Bakr
natural convection flow over horizontal and inclined plates in porous media, Int. J. Heat Mass Transf., 45 (2002), 2265–2276. J.Y. Jang and K.N. Lie, The influence of surface mass flux on vortex instability of a horizontal mixed convection flow in a saturated porous medium, Int. J. Heat Mass Transf., 38 (1995), 3305–3311. I.A. Hassanien, A.A. Salama and N.M. Moursy, Non-Darcian effects on vortex instability of mixed convection over horizontal plates in porous medium with surface mass flux, Int. Comm. Heat Mass Transf., 31 (2004), 231–240. I.A. Hassanien, A.A. Salama and N.M. Moursy, Inertia effect on vortex instability of horizontal natural convection flow in a saturated porous medium with surface mass flux, Int. Comm. Heat Mass Transf., 31 (2004), 741–750. K. Vafai, Convection flow and heat transfer in variable porosity media, J. Fluid Mech., 147 (1984), 233–259. B.C. Chandrasekhara, Mixed convection in the presence of horizontal impermeable surfaces in saturated porous media with variable permeability, Waerme - Stoffuebertrag, 19 (1985), 195–201. F.S. Ibrahim and I.A. Hassanien, Influence of variable permeability on combined convection along a non-isothermal wedge in saturated porous medium, Transport in Porous Media, 39 (2000), 57–71. I.A. Hassanien and A.M. Elaiw, Variable permeability effect on buoyancyinduced boundary layer flow in a saturated porous medium with variable wall temperature, Heat Mass Transf., (2006) in press. J. Jang and J. Chen, Variable porosity effect on vortex instability of a horizontal mixed convection flow in a saturated porous medium, Int. J. Heat Mass Transf., 32(1993), 1573–1582. I.A. Hassanien, A.A. Salama and A.M. Elaiw, Variable permeability effect on vortex instability of mixed convection flow in a semi-infinite porous medium bounded by a horizontal surface, Appl. Math. and Comp., 146 (2003), 829– 847. I.A. Hassanien, A.A. Salama and A.M. Elaiw, Variable permeability effect on vortex instability of a horizontal natural convection flow in a saturated porous medium with variable wall temperature, ZAMM. Z. Angew. Math. Mech., 84 (2004), 39–47. J.Y. Jang and J.L. Chen, Variable porosity and thermal dispertion effects on vortex instability of a horizontal natural convection flow in a saturated porous medium, Warme und Stoffubertrangung, 29 (1994), 153–160. M. Nayagam, P. Jain, and G. Fairweather, The effect of surface mass transfer on buoyancy-induced flow in a variable porosity medium adjacent a horizontal heated plate, Int. Commun. Heat Mass Transf., 14 (1987), 495–506. E.M. Sparrow, H. Quack, and C.T. Boerner, Local nonsimilarity boundary layer solutions. AIAA J., 8 (1970) 1936-1942. R.A. Usmani, Some new finite difference methods for computing eigenvalues of two-point boundary value problems, Comput. Math. Appl., 9 (1985), 903– 909. IMSL, References Manual, IMSL, Inc., Houston, TX, (1990).
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
93
ANALYTICITY OF STABLE INVARIANT MANIFOLDS FOR GINZBURG-LANDAU EQUATION∗ A.V. FURSIKOV Department of Mechanics & Mathematics Moscow State University, Moscow, Russia 119992 E-mail:
[email protected] This paper is devoted to prove analyticity of stable invariant manifold in a neighbourhood of an unstable steady-state solution for Ginzburg-Landau equation defined in a bounded domain of dimension not more than three. This investigation is made for possible applications in stabilization theory for semilinear parabolic equation. Keywords: Ginzburg-Landau equation; Stable invariant manifold; Analyticity; Stabilization.
1. Introduction In this paper we prove analyticity of stable invariant manifold M− near unstable steady-state solution of Ginzburg-Landau equation. This result can be used in stabilization theory for semilinear parabolic PDE defined in a bounded domain Ω with feedback Dirichlet control given on the boundary ∂Ω or on its open part. This theory for general quasilinear parabolic equation and for NavierStokes system was built in Refs. 1–3. We have to emphasize that the main reason to develop stabilization theory is to provide reliable stable algorithms for numerical stabilization. To construct such algorithms it is very desirable to have a simple description for infinite-dimensional invariant manifold M− allowing to calculate it easily in arbitrary point. Just such description gives functional-analytic decomposition of M− . Using classical description of M− by means of a map F (y− ) (see Refs. 4,5), one can look for this map as a series ∗ The
work has been fulfilled by RAS programm ”Theoretical problems of modern mathematics‘”’, project ”‘Optimization of numerical algorithms of Mathematical Physics problems”’. Author was supported in part by RFBI Grant #04-01-00066.
January 8, 2007
94
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A.V. Fursikov
F (y− ) =
∞ X
Fk (y− )
k=2
where Fk (y− ) are power operators in y− of order k. Using special differential equation in variational derivatives for map F it is possible to obtain recurrent formulae for Fk . These recurrent formulae allow us to prove convergence of series for F (y− ). First step in realization of this plan has been made in Ref. 6 where analyticity of stable invariant manifold in a neghborhood of zero steady state solution was proven in the case of one-dimensional semilinear parabolic equation. Moreover, obtained recourrence relations were succesfully used in Ref. 7 for numerical calculations. Note that under assumptions of Ref. 6 the linearization near steady state solution of the space part of semilinear equation is ordinary differential equation with constant coefficients. Therefore its eigenfunctions are sin kx. This circumstance were used essentially in Ref. 6. The methods of present paper do not use explicit form of eigenfunctions and therefore can be applied to situation when aforementioned linearization is an elliptic operator with variable coefficients defined in arbitrary bounded domain. 2. Stable Invariant Manifold In this section we recall certain notions connected with stable invariant manifolds for Ginzburg-Landau equation. 2.1. Ginzburg-Landau equation Let G ⊂ IRn , n = 1, 2, 3 be a bounded domain with C ∞ -boundary ∂G. We consider Ginzburg-Landau equation ∂t v(t, x) − ν∆v(t, x) − v(t, x) + v 3 (t, x) = f (x),
x ∈ G, t > 0
(1)
with boundary and initial conditions v(t, ·)|x∈∂G = 0, v(t, x)|t=0 = v0 (x),
x ∈ G,
(2) (3)
where ∂t v=∂v/∂t, ν > 0 is a parameter, f (x)∈L2 (G), v0 (x)∈H 2 (G)∩H01 (G) are given functions. Recall that H k (G) is the Sobolev space of functions belonging to L2 (G) together with all their derivaties up to the order k, H01 (G) = {u(x) ∈ H 1 (G) : u|∂G = 0}.
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Analyticity of Stable Invariant Manifolds
95
As a phase space of the dynamical system generated by (1), (2) we take the functional space V ≡ V (G) = H 2 (G) ∩ H01 (G).
(4)
Let vb(x) ∈ V be a steady-state solution of (1), (2), i.e. a solution of the problem −ν∆b v (x) − vb(x) + vb3 (x) = f (x),
x ∈ G,
vb|∂G = 0.
(5)
To study the structure of the dynamical system (1), (2) in a neighborhood of vb(x) we make the change of unknown functions in (1), (2): v(t, x) = vb(x) + y(t, x).
(6)
After substituting (6) into (1)–(3) and taking into account (5) we get: ∂t y(t, x)−ν∆y(t, x)+q(x)y(t, x)+B(x, y(t, x)) = 0, x ∈ G, t > 0,
(7)
y(t, ·)|x∈∂G = 0,
(8)
y(t, x)|t=0 = y0 (x) = v0 (x) − vb(x),
x ∈ G,
(9)
where q(x) = 3b v 2 (x) − 1,
B(x, y) = y 3 + 3b v (x)y 2
(10)
Let {ek (x), λk },
λ1 ≤ λ2 ≤ ... ≤ λk → ∞
as k → ∞
(11)
be the eigenfunctions and the eigenvalues of the spectral problem Ae ≡ −ν∆e(x) + q(x)e(x) = λe(x), x ∈ G
e|∂G = 0.
(12)
We assume that eigenvalues λk of the spectral problem (12) satisfy the condition: λ1 ≤ ... ≤ λN < 0 < λN +1 ≤ ... ≤ λk ≤ ...
(13)
Since operator A is symmetric in L2 (G), the set (11) of its eigenfunctions {ek } forms orthogonal basis in L2 (G). We can assume (have done normalization) that {ek } is orthonormal basis in L2 (G). It is well-known that usual Sobolev H 2 -norm in V = H 2 (G) ∩ H01 (G) is equivalent to the norm Z ∞ ∞ X X kvk2V = λ2j |vj |2 , where vj = v(x)ej (x)dx, and v(x) = vj ej (x). (14) j=1
G
j=1
January 8, 2007
96
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A.V. Fursikov
Evidently, {ej } forms orthogonal basis in V with respect to scalar product defined by norm (27). Below we suppose that the phase space V is supplied with the norm (27). In virtue of (13), the solutions e−λk t ek (x) of the linear equation ∂y + Ay = 0 (15) ∂t tend to infinity as t → ∞ for k = 1, ..., N , and tend to zero as t → ∞ for k > N. We introduce the subspaces V+ ≡ V+ (G) = [e1 , ..., eN ],
V− ≡ V− (G) = [eN +1 , eN +2 ...]
(16)
of unstable and stable modes for equation (15). Since eigenfunctions (11) form orthogonal basis in the phase space (4), the following relation is true: V+ (G) ⊕ V− (G) = V (G).
(17)
2.2. Stable invariant manifold It is well-known, that for each y0 ∈ V there exists a unique solution y(t, x) ∈ C(0, T ; V (G)) of problem (7)–(10), where T > 0 is arbitrary fixed number. We denote by S(t, y0 ) the solution operator of the boundary value problem (7)–(10): S(t, y0 ) = y(t, ·)
(18)
where y(t, x) is the solution of (7)–(10). Recall now some commonly used definitions of stable invariant manifold (see Chapter V in Ref. 4) adopted for our case. The origin of the phase space V , i.e. the function y(x) ≡ 0, is, evidently, a steady-state solution of problem (7)–(10). Definition 2.1. The set M− ⊂ V defined in a neighborhood of the origin is called the stable invariant manifold if for each y0 ∈ M− the solution S(t, y0 ) is well-defined and belongs to M− for each t > 0, and kS(t, y0 )kV ≤ ce−rt
as
t→∞
(19)
where 0 < r < λN +1 . The stable invariant manifold can be defined as a graph in the phase space V = V+ ⊕ V− by the formula M− = {y− + F (y− ), y− ∈ O(V− )}
(20)
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Analyticity of Stable Invariant Manifolds
97
where O(V− ) is a neighborhood of the origin in the subspace V− , and F : O(V− ) → V+
(21)
is a certain map satisfying kF (y− )kV+ /ky− kV− → 0 as
ky− kV− → 0.
(22)
So, in order to construct the invariant manifold M− we have to calculate the map (21), (22). 3. Preliminaries To get functional-analytic decompozition of the map F that defines stable invariant manifold, we have to derive differential equation for F . First of all we recall derivation of well-known equation for map (21) that determines invariant manifold M− . After that we recall definitions of certain notions that we use later. 3.1. Equation for F Let us introduce several notations. We rewrite equations (7), (10) using definition (12) of operator A as follows: ∂t y(t) + Ay(t) + B(·, y(t)) = 0.
(23)
Define the orthoprojectors P+ : V → V+ ,
P − : V → V−
(24)
and introduce notations P+ y=y+ , P− y = y− , P+ S(t, y0 )=S+ (t, y0 ), P− S(t, y0 )=S− (t, y0 ). (25) Taking into account that the spaces V+ , V− are invariant with respect to acting of operator A and using notations (11) we can rewrite (9) as follows: ∂t y+ (t) + Ay+ (t) + P+ B(·, y+ (t) + y− (t)) = 0 ∂t y− (t) + Ay− (t) + P− B(·, y+ (t) + y− (t)) = 0.
(26)
Let y0 ∈ M− . Then by (20) it has the form y0 = y− +F (y− ). By definition of an invariant manifold for each t ∈ R+ S(t, y0 ) ∈ M− or, what is equivalent S+ (t, y− + F (y− )) = F (S− (t, y− + F (y− ))).
January 8, 2007
18:38
98
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A.V. Fursikov
We differentiate this equation with respect to t and express t-derivatives with help of equations (12). As a result we get: AS+ (t, y− + F (y− )) + P+ B(·, S(t, y− + F (y− ))) = hF 0 (S− (t, y− + F (y− ))), AS− (t, y− + F (y− ))
(27)
+ P− B(·, S+ (t, y− + F (y− )) + S− (t, y− + F (y− )))i where by hF 0 (z), hi we denote the value of derivative F 0 (z) on vector h. Passing to limit in (13) as t → 0 we get the desired equation for F : AF (y− ) + P+ B(·, y− + F (y− ))=hF 0 (y− ), Ay− + P− B(·, y− + F (y− ))i. (28) 3.2. Analytic maps Let Hi be Hilbert spaces with the scalar products (·, ·)i and the norms k · ki where i = 1, 2. We denote by (H1 )k = H1 × ... × H1 (k times) the direct product of k copies of H1 and define by Fk : (H1 )k → H2 a k-linear operator Fk (h1 , ..., hk ), i.e. the operator that is linear with respect to each variable hi , i = 1, ..., k. Then kFk k =
sup
kFk (h1 , ..., hk )k2 .
(29)
khi k1 =1,i=1,...,k
Restriction of k-linear operator Fk (h1 , ..., hk ) to diagonal h1 = ... = hk = h is called power operator of order k: Fk (h) = Fk (h, ..., h).
(30)
Using derivatives one can restore k-linear operator Fk (h1 , ..., hk ) by power operator Fk (h). Denote by O(H1 ) a neighbourhood of origin in the space H1 . The map F : O(H1 ) → H2
(31)
is called analytic if it can be decomposed in the series F (h) = F0 +
∞ X
Fk (h)
(32)
k=1
where F0 ∈ H2 and Fk (h) are power operators of order k. Series (18) ∞ X kFk (h)k2 converges. converges if the numerical series kF0 k2 + k=1
Proposition 3.1. Let norms (15) of power operator Fk (h) from (18) satisfy kFk k ≤ γρ−k
(33)
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Analyticity of Stable Invariant Manifolds
99
where γ > 0, ρ > 0 do not depend on k. Then series (18) converges for each h belonging to the ball Bρ (H1 ) = {h ∈ H1 : khk1 < ρ}. Proof. There exists ε > 0 such that khk1 ≤ ρ − ε. Then using (15), (19) we get ¶k ∞ ∞ µ X X ρ−ε k < ∞. ¤ kF (h)k2 ≤ kF0 k2 + kFk kkhk1 ≤ γ ρ k=1
k=1
3.3. Operators from equation for F and their kernels We consider here operators from equation (14). 3.3.1. Subspapces V± and projectors P± Subspaces V+ , V− of V are defined in (16), and projectors P± are defined in (10). Orthogonality of decomposition (17) as well as orthogonality of projectors (10) take place with respect to the scalar product corresponding to norm (27). Therefore kP+ k ≤ 1,
kP− k ≤ 1.
(34)
Kernels Pb± of operators P± , i.e. distributions on G × G such that Z (P± v)(x) = Pb± (x, ξ)v(ξ)dξ ∀v(ξ) ∈ V
(35)
G
are defined as follows: Pb+ (x, ξ) =
N X
ek (x)ek (ξ),
Pb− (x, ξ) = δ(x − ξ) −
k=1
N X
ek (x)ek (ξ),
(36)
k=1
where δ(x − ξ) is Dirac δ-function. Note that integral in (29) in the case Pb− (x, ξ) is understood (at each fixed x) as value of distribution N X δ(x − ξ) − ek (x)ek (ξ) on the test function v(x). Such notation for values k=1
of distributions will be often used below without additional explanations. 3.3.2. Analyticity of the map B(·, y) We intend to decompose operator B(·, y) defined in (10) in series (18). For this we use that the phase space V is the algebra, i.e. in this space the operation of multiplication of functions is well-defined.
January 8, 2007
18:38
100
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A.V. Fursikov
Define the operator of multiplication Γk as follows: Γk : V k −→ V,
Γk (v1 , ..., vk )(x) = v1 (x) · ... · vk (x)
(37)
where V k = V × ... × V (k times). Lemma 3.1. Let V = H 2 (G)∩H01 (G), G ⊂ IRn , n = 1, 2, 3. Then operator Γk defined in (31) is k-linear bounded operator. Moreover, there exists a constant γ > 0 such that for each k kΓk (v1 , ..., vk )kV ≤ γ k−1 kv1 kV · ... · kvk kV .
(38)
Proof. Since norm (27) is equivalent to the norm of Sobolev space H 2 (G), we can use H 2 -norm. Taking into account that embeddings H 2 (G) ⊂ C(G) and H 2 (G) ⊂ W41 (G) are continuous we get: 1/2 X Z kv1 · v2 kH 2 (G) = |Dα (v1 (x)v2 (x))|2 dx kα|≤2
≤ kv1 kH 2 kv2 kC + kv1 kC kv2 kH 2 + 2kv1 kW4! kv2 kW41 ≤ γkv1 kH 2 kv2 kH 2 . Using this inequality we obtain (31) by induction in k. ¤ It follows from Lemma 3.1 and (10) that for y ∈ V B(x, y(x)) = Γ3 (y, y, y)(x) + 3b v (x)Γ2 (y, y)(x).
(39)
Therefore operator B is analytic, and relation (33) is its decomposition in series (18). The kernels of operators from (33) are as follows: b 3 (x; ξ1 , ξ2 , ξ3 ) = δ(x − ξ1 )δ(x − ξ2 )δ(x − ξ3 ) Γ
(40)
b 2 (x; ξ1 , ξ2 ) = 3b 3b v (x)Γ v (x)δ(x − ξ1 )δ(x − ξ2 ).
(41)
3.4. Series for operator F Let us consider the special case when H1 = V− , H2 = V+ with Hilbert spaces V− , V+ defined in (16). In this case analytic map (17), (18) can be rewritten as follows: F : O(V− ) → V+ ,
F (y− ) =
∞ X
Fk (y− ).
(42)
k=2
We assume that F0 = 0, F1 = 0 because by (22) the map F defining stable invariant manifold M− has just this form.
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Analyticity of Stable Invariant Manifolds
101
Since F (y− ) ∈ V+ , it is a function depending on argument x: F (y− ) ≡ F (x; y− ). kernels Fbk (x; ξ1 , ..., ξk )
Now we define Fk (·; y1 , ..., yk ), yj ∈ V− , j = 1, ..., k. Let
of
k-linear
operator
V ⊂ L2 (G) ⊂ V 0
(43)
where V 0 is the space dual to V with respect to duality generated by scalar product in L2 (G). Define Z V−0 = {u(x) ∈ V 0 : u(x)ϕ(x)dx = 0 ∀ϕ ∈ V+ } = V+⊥ . (44) Below we use the following notation: ξ k = (ξ1 , ..., ξk ),
dξ k = dξ1 ...dξk ,
where ξj ∈ G, j = 1, ..., k,
(45)
y− (ξ k ) = y− (ξ1 ) · ... · y− (ξk ), y(j k ; ξ k ) = yj1 (ξ1 ) · ... · yjk (ξk ). (46) The kernel Fbk (x; ξ k ), x ∈ G, ξ k ∈ Gk ≡ G × ... × G (k times) belongs to the k k space V+ ⊗ (⊗ V−0 ) where ⊗ V−0 = V 0 ⊗ ... ⊗ V 0 (k times), i.e. Fbk (x; ξ k ) is a distribution on Gk with values in V+ , such that for each yj ∈ V, j = 1, ..., k the value Z (47) Fk (x; y1 , ..., yk ) = Fbk (x; ξ k )y(j k ; ξ k ) dξ k
of distribution Fbk (x; ξ k ) on test function y(ξ1 ) · ... · y(ξk ) is well-defined. Moreover, if yj ∈ V+ at least for one j ∈ {1, ..., k} then right hand side of equality (40) equals zero. Moreover, since Fk (·, y1 , ..., yk ) is symmetric with respect to (y1 , ..., yk ), i.e. Fk (·, y1 , ..., yk ) = Fk (·, yj1 , ..., yjk ) for each permutation (j1 , ..., jk ) of (1, ..., k), we can assume that the distribution Fbk (x; ξ k ) is symmetric with respect to (ξ1 , ..., ξk ) Now using (40) and (41) we can rewrite the series from (36) in the form: ∞ Z X (48) F (x, y− ) = Fbk (x; ξ k )y− (ξ k )dξ k . k=2
In accordance with (15) we define the norm kFk k of Fbk (x; ξ k ) ∈ k
V+ ⊗ (⊗ V−0 ) by the following way: kFk k =
sup kyj kV− =1 j=1,...,k
=
sup
kFk (·, y1 , ..., yk )kV+
sup
ky+ kV+ =1 kyj kV− =1 j=1,...,k
Z y+ (x)Fbk (x; ξ k )y(j k ; ξ k ) dx dξ k .
(49)
January 8, 2007
18:38
102
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A.V. Fursikov
For each function or distribution K(η1 , ..., ηr ) defined on Gr we determine the function σηr K(η1 , ..., ηr ) which is simmetric with respect to arbitrary permutation (ηj1 , ..., ηjr ) of variables (η1 , ..., ηr ) by the formula: 1 X K(ηj1 , ..., ηjr ) (50) σηr K(η1 , ...ηr ) = r! (j1 ,...,jr )
where the sum in the r.h.s. of (50) performs over all permutations (j1 , ..., jr ) of the set (1, ..., r). Lemma 3.2. Let K(η1 , ..., ηr ) be defined on Gr . Then (a) The following equality is true: Z Z ¡ ¢ σηr K(η r ) h(j r ; η r ) dη r K(η r )h(j r ; η r ) dη r =
(51)
for any h(j r ; η r ) such that the series in the l.h.s. converges. (b) For any function G(η1 , ..., ηr ) simmetric in its arguments G(η r )σηr K(η r ) = σηr [G(η r )K(η r )].
(52)
k
(c) If all distributions Fk (x; η k ) ∈ V+ ⊗ (⊗ V−0 ) from (42) are symmetric in their arguments η k then these distributions are defined uniquely by values of analytic functions F (y− ), y ∈ V− from (42). The proof of this Lemma is evident. 4. Formal Construction of the Map F We look for the map defining stable invariant manifold in the form of a series (42). In this section we find recurrence relations for kernals Fbk (x; ξ k ). 4.1. Calculation of Fb2 (x; ξ 2 ) Below using k-linear and power operators Fk (x; y, ..., y) = Fk (x; y) we omit sometimes variable x writing Fk (y). After substituting (42) into (14) we get taking into account (10) that for each y = y− ∈ V− ∞ 3 k X X X AFq (y) + P+ ak Ckj F j (y)y k−j q=2
=
∞ X q=2
k=2
j=0
qFq y, ..., y, Ay + P−
3 X
k=2
ak
k X j=0
Ckj F j (y)y k−j
(53)
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Analyticity of Stable Invariant Manifolds
103
where Ckj = k!/(j!(k − j)!) and a3 ≡ a3 (x) ≡ 1,
a2 ≡ a2 (x) = 3b v (x).
(54)
Let us equate the terms from (20) of the second order with respect to y: AF2 (y, y) + 3P+ (b v y 2 ) = 2F2 (y, Ay). Using kernels of bilinear operator F2 (y, y) we can rewrite this relation as follows: Z [Fb2 (x; ξ 2 )(Aξ1 + Aξ2 )y(ξ 2 )) − Ax Fb2 (x; ξ 2 )y(ξ 2 )]dξ 2 = 3P+ (b v y 2 )(x) (55) where subscript of operator A indicates independent variable of a function to that this operator A is applied. We will use notation: Aξk =
k X
Aξj .
(56)
j=1
Carrying operator Aξ2 from y(ξ 2 ) to Fb2 (x; ξ 2 ) and using operator (31) in right side of (21) we get: Z Z 2 2 2 b b 2 (η; ξ 2 )y(ξ 2 )dηdξ 2 . (57) (Aξk − Ax )F2 (x; ξ )y(ξ )dξ = 3 Pb+ (x, η)b v (η)Γ Since y ∈ V− and subspaces V+ , V−0 are invariant with respect of operator A, we obtain from (23) the relation determining Fb2 : Z −1 2 b b 2 (η; ζ 2 )Pb− (ζ 2 ; ξ 2 )dζ 2 , (58) Pb+ (x, η)b F2 (x; ξ ) = 3(Aξ2 − Ax ) v (η)Γ where Pb− (ζ 2 , ξ 2 ) is defined below, in (19). Note that operator (Aξk −Ax )−1 is well-defined. Moreover, the following k
assertion hold (recall that we define the norm of the space V+ ⊗ (⊗ V−0 ) by (49)): Lemma 4.1. Operator k
k
(Aξk − Ax )−1 : V+ ⊗ (⊗ V−0 ) −→ V+ ⊗ (⊗ V−0 )
(59)
is well-defined and bounded, and for its norm the following estimate holds: k(Aξk − Ax )−1 k ≤ b(k + 1)−1 with certain constant b > 0.
(60)
January 8, 2007
18:38
104
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A.V. Fursikov
The proof of this Lemma will be presented in some other place. At last we write down the recurrence relation for the kernel Fb(x; ξ 3 ) that can be obtained similarly to the formula (24) ·Z −1 3 b b 3 (η; ζ 3 )Pb− (ζ 3 ; ξ 3 )dηdζ 3 Pb+ (x, η)Γ F3 (x; ξ ) = (Aξk − Ax ) Sξ3 Z (61) + 6 Pb+ (x, η)b v (η)Fb2 (η; ζ 2 )δ(η − ζ3 )Pb− (ζ 3 ; ξ 3 )dηdζ 3 ¸ Z b 2 (s; ζ 2 )Pb− (ζ 2 ; ξ 2 )dη 2 dsdζ 2 . − 2 Fb2 (x; η 2 )Pb− (η1 , ξ3 )Pb− (η2 , s)b v (s)Γ
4.2. Calculation of Fbq (x; ξ q )
Let us rewrite equality (20) as follows: ∞ X
" AFq (y) + P+
q=2
=
∞ X
# ak y
k
+ I1
k=2
à qFq
3 X
"
y, ..., y, Ay + P−
q=2
3 X
(62)
#! ak y
k
+ I2
k=2
where I1 =P+
3 X
ak
k=2
I2 =
∞ X
k X
Ckj y k−j
∞ X
Fm1 (y)...
m1 =2
j=1
qFqy, ..., y, P−
q=2
3 X
ak
k=2
∞ X
Fmj (y)
mj =2 k X j=1
Ckj y k−j
∞ X
∞ X
Fm1 (y)...
m1 =2
(63) Fmj (y).
mj =2
Writing operators with help of their kernels we get à P+
3 X k=2
! ak y
k
(x) =
3 Z X k=2
b k (s; ξ k )y(ξ k ) ds dξ k Pb+ (x, s)ak (s)Γ
(64)
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Analyticity of Stable Invariant Manifolds
105
where, recall, we use notations (39), (41). Similarly we obtain: I1 ≡ I1 (x) =
3 X k X ∞ X
Z
X
Ckj
Pb+ (x, s)ak (s)(Fbm1 (s; ·)...
k=2 j=1 p=2j m1 +...+mj =p
b k−j (s; ·))(ξ p+k−j )y(ξ p+k−j ) ds dξ p+k−j ...Fbmj (s; ·)Γ (doing change of variables (k, j, p) −→ (q, j, p) : q = k − j + p) Z ∞ X X X j = Cq−p+j Pb+ (x, s)aq−p+j (s)(Fbm1 (s; ·)... q=3 (j,q)∈Qq m1 +...+mj =p
(65)
b q−p (s; ·))(ξ q )y(ξ q ) ds dξ q ...Fbmj (s; ·)Γ
where Qq = {(j, p) ∈ IN2 : 2 ≤ q − p + j ≤ 3, 1 ≤ j ≤ q − p + j, p ≥ 2j} = (if q ≥ 4) {(j, p) ∈ IN2 : (1, q − 2), (1, q − 1), (2, q − 1), (2, q), (3, q), (3, q + 1)}, Q3 = {(j, p) ∈ IN2 : (1, 2), (2, 2), (2, 3), (3, 3), (3, 4)}.
(66)
Besides, we get ∞ X
qFq (x; y, ..., y, Ay) =
q=2
∞ Z X
=
∞ Z X
Fbq (x; ξ q )Aξq y(ξ q ) dξ q
q=2
(67)
Aξq Fbq (x; ξ q )y(ξ q ) dξ q .
q=2
Using notation Z q−1 ) = \ F q P− (x; s, ζ
Fbq−1 (x; η, ζ q−2 )Pb− (η, s)dη
we can write à ! ∞ 3 X X k qFq x; y, ..., y, P− ak y q=2
=
∞ X 3 Z X
n−1 )a (s)Γ(s; b η m )y(ζ n−1 )y(η m ) ds dζ n−1 dη m \ nF m n P− (x; s, ζ
n=2 m=2
=
∞ X
(68)
k=2
X
q=3 n+m=q+1 n≥2,m=2,3
Z q q q b \ nam (s)(F n P− (x; s, ·)Γm (s; ·))(ξ )y(ξ ) ds dξ .
January 8, 2007
18:38
106
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A.V. Fursikov
At last I2 (x) =
∞ X 3 X k X r=2 k=2 j=1
Ckj
∞ X
X
Z r−1 )a (s) \ rF k r P− (x; s, ζ
p=2j m1 +...+mj =p
b k−j (s; ·))(ξ p+k−j )y(ζ r−1 )y(ξ p+k−j )dsdζ r−1 dξ p+k−j (Fbm1 (s; ·)...Fbmj (s; ·)Γ (changing variables (k, r, j, p)−→(q, r, j, p) : q = p + r + k − j − 1) Z ∞ X X X j = Cq−p−r+j+1 aq−p−r+j+1 (s)
(69)
q=4 (r,p,j)∈Rq m1 +...+mj =p q q q b b b \ × r(F r P− (x; s, ·)Fm1 (s; ·)...Fmj (s; ·)Γq−p−r+1 (s; ·))(ξ )y(ξ ) ds dξ
where Rq ={(r, p, j)∈IN3 : 1≤q−p−r+j≤2, 1≤j≤q−p−r+j+1, p≥2j, r≥2}. (70) After substituting (14), (17), (18) into (12) and doing some simple transformation we get ∞ Z X
(Aξq − Ax )Fbq (x; ξ q )y(ξ q ) dξ q
q=2
= −
3 Z X k=2 ∞ X
b k (s; ξ k )y(ξ k )dsdξ k Pb+ (x, s)ak (s)Γ X
(71)
Z q q q b \ nam (s)(F n P− (x; s, ·)Γm (s; ·))(ξ )y(ξ )dsdξ +I1 (x)−I2 (x)
q=3 n+m=q+1 n≥2,m=2,3
where I1 (x), I2 (x) are defined in (15),(69). In order to derive from (71) recurrence relation for Fbq (x; ξ q ) we i) make the change y(ξ q ) = Pb− (ξ q ; ζ q )z(ζ q ) with arbitrary z(ζ) ∈ V where we use the notation Pb− (ζ k ; ξ k ) = Pb− (ζ1 , ξ1 ) · ... · Pb− (ζk , ξk )
(72)
for kernel of tensor product P− ⊗ ... ⊗ P− (k times) for projection operator P− ; ii) apply symmetrization operator σζ q and avoid z(ζ q ); and iii) using Lemma 4.1 invert operator Aξq − Ax . As a result (renaming coordinates) we get the recurrence relation for Fbq (x; ξ q ) with q ≥ 4: Fbq (x; ξ q ) = (Aξq − Ax )−1 σξq (J1 (x; ξ q ) − J2 (x; ξ q ) − J3 (x; ξ q ))
(73)
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Analyticity of Stable Invariant Manifolds
107
where X
J1 (x; ξ q ) =
X
j Cq−p+j
(74)
(j,q)∈Qq m1 +...+mj =p
Z
b q−p (s; ·))(ζ q )Pb− (ζ q ; ξ q ) ds dζ q × Pb+ (x, s)aq−p+j (s)(Fbm1 (s; ·)...Fbmj (s; ·)Γ J2 (x; ξ q ) X =
(75)
Z q b q q q b \ nam (s)(F n P− (x; s, ·)Γm (s; ·))(ζ )P− (ζ ; ξ ) ds dζ
n+m=q+1 n≥2,m=2,3
J3 (x; ξ q ) =
X
X
Z j Cq−p−r+j+1
aq−p−r+j+1 (s)
(76)
(r,p,j)∈Rq m1 +...+mj =p q b q q q b b b \ ×r(F r P− (x; s, ·)Fm1 (s; ·)...Fmj (s; ·)Γq−p−r+1 (s; ·))(ζ )P− (ζ ; ξ ) ds dζ .
Thus we have proven the following Theorem: Theorem 4.1. The kernels Fbq (x; ξ q ) from decopmposition (42) of the map F (x; y) defining stable invariant manifold are defined in (24) (for q = 2), in recurrence relation (27) (for q = 3) and in (20)–(23) (for q ≥ 4).
5. Analyticity of the Map F In this section we prove convergence of series (42) for map F (x; y) defining stable invariant manifold.
5.1. Estimate of norm for Fbq (x; ξ q ) k
First of all we have to recall that the norm of the space V+ ⊗ (⊗ V−0 ) is defined by relation (49). In virtue of (20), (50) and Lemma 4.1, kFq k ≡ kFbq k ≤ b(q + 1)−1 (kJ1 k + kJ2 k + kJ3 k) for
q≥4
(77)
where kernels J1 , J2 , J3 are defined in (21), (22), (23). Let us estimate now these kernels. Using that P+ y+ = y+ , for y+ ∈ V+ , P− y− = y− , for
January 8, 2007
18:38
108
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A.V. Fursikov
y− ∈ V− , and taking into account Lemmas 3.1, 3.2 we get from (21) X X j kJ1 k = sup sup Cq−p+j × ky+ kV+ =1 kyr kV− =1 (j,q)∈Qq m1 +...+mj =p r=1,...,q
Z
y+ (x)aq−p+j (x)Fm1 (x; y1 , ...)...Fmj (x; ..., yp )yp+1 (x)...yq (x) dx X X j ≤ Cq−p+j kaq−p+j kV kFm1 k...kFmj kγ q−p+j .
(78)
(j,q)∈Qq m1 +...+mj =p
Similarly, we get from (22) Z X kJ2 k = sup y+ (x)nFn (x; y1 , ..., yn−1 , P− (am yn ...yq )) dx ky+ kV+ =1 n+m=q+1 kyr kV− =1 n≥2,m=2,3 r=1,...,q
X
≤
(79) m
nkFn kkam kV γ .
n+m=q+1 n≥2,m=2,3
At last we obtain from (23) X kJ3 k = sup
X
j Cq−p−r+j+1
kykV+ =1 (r,p,j)∈Rq m1 +...+mj =p kyr kV− =1 r=1,...,q
Z
× rFr (x; P− (y1 ...yq−p−r+1 aq−p−r+j+1 Fm1 (·; yq−p−r+2 , ...)
(80)
...Fmj (·; ..., yq−r+1 )), yq−r+2 , ..., yq )y(x)dx ≤
X
j Cq−p−r+j+1 rkaq−p−r+j+1 kV kFr kkFm1 k...kFmj kγ q−p−r+j+1 .
(r,p,j)∈Rq m1 +...+mj =p
Let kak kV ≤ b0 /b,
k = 2, 3.
Then summarizing (32)–(35) we obtain the following estimate for kFq k when q ≥ 4: Ã X X b0 j Cq−p+j kFm1 k...kFmj kγ q−p+j kFq k ≤ q+1 m +...+m =p (j,q)∈Qq
+
X
nkFn kγ
n+m=q+1 n≥2,m=2,3
m
1
X
j
X
! (81)
Cκj rkFr kkFm1 k...kFmj kγ κ + (r,p,j)∈Rq m1 +...+mj =p
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Analyticity of Stable Invariant Manifolds
109
where κ = q − p − r + j + 1. Similarly we get from (24), (27): kF2 k ≤ b0 γ 2 /3
kF3 k ≤ b0 (γ 3 + 4γ 2 kF2 k)/4.
(82)
Thus, we have proven the following lemma. Lemma 5.1. The norms kF2 k, kF3 k satisfy inequality (37), and the norms kFq k for q ≥ 4 satisfy estimate (36). 5.2. Convergence of series for F (x, y) Define coefficients ϕq of the series ϕ(λ) =
∞ X
ϕ q λq
(83)
q=2
by the relations ϕ2 = b0 γ 2 /3
ϕ3 = b0 (γ 3 + 4γ 2 ϕ2 )/4,
(84)
and for q ≥ 4 Ã ϕq = b0 (q + 1)
+
X n+m=q+1 n≥2,m=2,3
X
X
(j,q)∈Qq
m1 +...+mj =p
−1
nϕn γ
m
+
X
j Cq−p+j ϕm1 ...ϕmj γ q−p+j
X
!
(85)
Cκj rϕr ϕm1 ...ϕmj γ κ
(r,p,j)∈Rq m1 +...+mj =p
with κ = q − p − r + j + 1. Evidently, kFq k ≤ ϕq
for each q ≥ 2
(86)
and therefore to prove convergence of series (42) we have to prove convergence of series (38). Theorem 5.1. The series (38) with coefficients ϕq defined in (39), (85) converges for sufficiently small |λ|. Proof. Multiplying both parts of equality (85) on (q + 1)λq , and both parts of equalities (39) on the same multiplier with q = 2, 3, and summing obtained equalities over q from 2 to ∞ we get the equality: ∂ (λϕ(λ)) = b0 (S1 (λ) + S2 (λ) + S3 (λ)) ∂λ
(87)
January 8, 2007
18:38
110
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A.V. Fursikov
where 3 X S1 (λ) = (γλ)k +
(88)
k=2
+
∞ X
X
λq
j Cq−p+j ϕm1 ...ϕmj γ q−p+j ,
(j,q)∈Qq m1 +...+mj =p
q=3
∞ X S2 (λ) = λq q=3
X
nϕn γ m
(89)
n+m=q+1 n≥2,m=2,3
∞ X S3 (λ) = λq q=4
X
X
X
j Cq−p−r+j+1 rϕr ϕm1 ...ϕmj γ q−r+1 . (90)
(r,p,j)∈Rq m1 +...+mj =p
Taking into account definition (16) of the set Qq and doing change of variables (q, j, p) → (k, j, p) : k = q + j − p in (88) we get:
S1 (λ) =
3 X
(γλ)k +
k=2
=
3 X k=2
=
3 X
k
(γλ) +
3 X
(γλ)k
k
(γλ)
k X j=1
k=2
Ckj
µ Ckj
∞ X
X
ϕm1 ...ϕmj λp−j
p=2j m1 +...+mj =p
j=1
k=2 3 X
k X
ϕ(λ) λ
¶j =
3 X
¶k µ ϕ(λ) (γλ) 1 + λ k
(91)
k=2
γ k (λ + ϕ(λ))k .
k=2
Changing order of summation in (89) we obtain:
S2 (λ) =
∞ X 3 X n=2 m=2
m n+m−1
nϕn γ λ
0
= ϕ (λ)
3 X
(γλ)m .
(92)
m=2
Changing variables (k, r, j, p) → (q, r, j, p) : k = q − p − r + j + 1 in (90) with help of definition (70) of the set Rq we get:
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Analyticity of Stable Invariant Manifolds
S3 (λ) =
k ∞ X 3 X X
Ckj
=
rϕr λ
r−1
r=2
= ϕ0 (λ)
X
3 X
(γλ)
k
k X
(γλ)k
j=1
k=2
k X
Ã
Ckj
µ Ckj
∞ X
!j ϕm λ
m
/λj
(93)
m=1
j=1
k=2 3 X
λp+r+k−j−1 rϕr ϕm1 ...ϕmj γ k
p=2j m1 +...+mj =p
r=2 k=2 j=1 ∞ X
∞ X
111
¶j
ϕ(λ) λ
.
Relations (92), (93) imply: S2 (λ)+S3 (λ)=ϕ0 (λ)
3 X
¶k µ 3 X ϕ(λ) k = ϕ0 (λ) γ k (λ+ϕ(λ)) . (94) (γλ)k 1 + λ k=2
k=2
Therefore we get from (87), (91), (94): Ã ! 3 X ∂ k 0 k (λϕ(λ) = b0 (1 + ϕ (λ)) γ (λ + ϕ(λ)) . ∂λ
(95)
k=2
Doing in (95) the change of functions ψ(λ) = λ + ϕ(λ)
(96)
we obtain the equality ∂ ∂ (λψ(λ) − λ2 ) = b0 ∂λ ∂λ
Ã
3 X γk k+1 (ψ(λ)) k+1
! .
(97)
k=2
Since in (97) both expressions under sign of derivative equal zero at λ = 0, we derive that à 3 ! X γk k+1 2 λψ(λ) − λ = b0 (ψ(λ)) . (98) k+1 k=2
Doing in (98) the change ψ(λ) = λz(λ) we obtain the relation Φ(z(λ), λ) ≡ z(λ) − 1 − b0
Ã
3 X γ k λk−1
k=2
k+1
(99) ! k+1
z(λ)
=0
(100)
January 8, 2007
18:38
112
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A.V. Fursikov
where the first equality is definition of the function Φ(z, λ). Since (96), (99) imply that z(0) = 1, we get from definition (100) that function Φ(z, λ) satisfies: Φ(z, λ)| z=1 = 0, λ=0
Φ0z (z, λ)| z=1 = 1. λ=0
Therefore by Implicite Function Theorem there exists a function z(λ) analytic in a neighborhood of origin such that z(0) = 1 and Φ(z(λ), λ) ≡ 0. Hence, by (96), (99) the function ϕ(λ) = λ(z(λ) − 1) defined in (38) is also analytic. ¤ Theorem 5.1 and inequalities (86) imply Theorem 5.2. Let F (·, y− ) be the map (21), (22) that defines the stable invariant manifold (20). Then decomposition of this map in series (40) converges in a neighborhood of origin of the space V− . References 1. A.V. Fursikov, Stabilizability of quasi linear parabolic equation by feedback boundary control. Sbornik Mathematics, 192, 4 (2001), 593–639. 2. A.V. Fursikov, Stabilizability of Two-Dimensional Navier-Stokes equations with help of a boundary feedback control. J. of Math. Fluid Mech., 3 (2001), 259–301. 3. A.V. Fursikov, Stabilization for the 3D Navier-Stokes system by feedback boundary control. Discrete and Cont. Dyn. Syst., 10, 1–2 (2004), 289–314. 4. A.V. Babin and M.I. Vishik, Attractors of Evolution equations, (NorthHolland, Amsterdam, London, New-York, Tokyo, 1992). 5. D. Henry, Geometric Theory of Semilinear Parabolic Equations, (Lecture Notes in Mathematics 840, Springer-Verlag, Berlin-Heidelberg-New York 1981). 6. A.V. Fursikov, Analyticity of Stable Invariant Manifolds of 1D-Semilinear Parabolic Equations. AMS Contemporary Mathematics Series. Proc. of Joint Summer Research Conference on Control Methods in PDE-Dynamical Systems. (AMS Providence, 2007) (to appear). 7. A.B. Kalinina, Numerical realization of the method of functional-analytic series for projection on a stable manifold. Numerical methods and programming, 7, 1 (2006), 65-72, http://num-meth.srcc.msu.su (in Russian).
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
113
APPROXIMATE SOLUTIONS FOR NON-LINEAR AUTONOMOUS ODEs ON THE BASIS OF PWL APPROXIMATION THEORY A.G. GARCIAa , S.I. BIAGIOLA, J.L. FIGUEROA, O.E. AGAMENNONI∗ Departamento de Ingenier´ıa El´ ectrica y de Computadoras, Universidad Nacional del Sur, Bah´ıa Blanca, Buenos Aires B8000CPB, Argentina a E-mail:
[email protected] L.R. CASTRO Departamento de Matem´ atica, Universidad Nacional del Sur, Bah´ıa Blanca, Buenos Aires B8000CPB, Argentina E-mail:
[email protected] In this paper a general approach to approximate the solutions of Ordinary Differential Equations (ODEs) is presented. The methodology uses a Piecewise Linear (PWL) approximation of the ODEs vector field which describes the dynamics of a system. Once the number of Simplices to include in the PWL approximation of the nonlinear vector field has been decided, a measure of the dynamics approximation error is used to estimate upper and lower bounds for the error between the actual and the approximated trajectories. Several examples are analyzed to illustrate the method. A comparison with a classical numerical solution is provided to show some advantages of the proposed technique. Keywords: Piecewise Linear (PWL); ODEs.
1. Introduction Finding approximate solutions (ASs) for nonlinear dynamics modelled by Ordinary Differential Equations (ODEs) is a relevant problem in the field of systems. Applications related to dynamics and control, involve computation of ASs for these ODEs, which is usually time-consuming and demands a significant computational effort. ∗ S.
Biagiola and J. Figueroa are also with CONICET. O. Agamennoni is also with CIC.
January 8, 2007
18:38
114
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A.G. Garcia et al.
Many research works focus on discretization methods for processes which are originally continuous-time and mathematically described by a system of nonlinear ODEs. The discretization approach used to describe process dynamic behavior usually aims at digital process simulation (Ref. 1). Most of classical methods for solving ODEs (e.g. Runge-Kutta) find ASs on the basis of time domain discretization. An alternative approach is to compute ASs using a discretization of the state space. In this sense, Girard2 developed a method to solve ODEs by replacing the vector field by a PWL approximation. Although there has been much research work dedicated to error estimators for numerical integration methods (Ref. 3 and references therein), to the best of the authors knowledge, an approximate solution method for nonlinear ODEs with an a priori determined error-bound is a novel approach. The present work introduces a new approach to the problem of describing the dynamic behavior of nonlinear autonomous systems. A general method to approximate the solutions of a set of ODEs is presented. The technique makes use of a PWL approximation of the ODEs vector field which describes the dynamics of a system. A measure of the dynamics approximation error is used to estimate upper and lower bounds for the error between the real and the approximate trajectories (i.e. the real and approximate solutions to the ODE). The nonlinear ODEs solution approach herein introduced, can be straightforwardly implemented for real-time applications. Due to recent advances in microtechnology such as the integrated circuits, i.e. electronic device that can operate as a high-speed analogical computer of very small size due to the high compression density (see for instance Ref. 4), it is possible to easily implement continuous-time algorithms, which is especially appealing for simulation and control purposes. The inclusion of a piecewise linear (PWL) approximation of the nonlinear dynamics yields a substantial reduction regarding computational time and effort demands. The proposed solution approach can be used in many applications. For instance, in the field of physical and (bio)chemical processes that exhibit nonlinear behavior. These ones, are good examples since many of them are modelled by systems of ODEs in continuous-time domain. Moreover, it could be used in the solution of dynamic optimization problems with significant advantages as regards computational time consumption. For instance, the AS method can be implemented to efficiently solve back-off algorithms immerse in control applications, to determine the operating point which guarantees feasibility even under disturbances effects
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Approximate Solutions for Non-linear ODEs
115
(Refs. 5,6). Besides, the method could be also applied in many control strategies of nonlinear processes, such as in model predictive control, where a long-term process behavior has to be determined in order to decide the next manipulated variable movement (Ref. 7). 2. An Error Bound for PWL Solutions: The Scalar Case Let us consider an ODE given by: x(t) ˙ = f (x),
(1)
where f (x) : < → < a continuous function, x(t) : D ⊂ <+ → < with D a compact set. We approximate the function f using a PWL approximation as defined in Ref. 8. If we note fPi W L the approximation to f on each simplex, we have: x˙ i (t) = fPi W L (xi ) = ai xi (t) + bi , i = 1, · · · , r, r being the number of simplices considered. Let us assume that the error bound on each simplex is given by: ¯ ¯ ¯f (x) − fPi W L (x)¯ ≤ εi , i = 1, .., r,
(2)
(3)
then: ¯ ¡ ¢¯ ¯x(t) ˙ − ai x(t) + bi ¯ ≤ εi , i = 1, · · · , r.
(4)
E i (t) = x(t) − xi (t), i = 1, · · · , r,
(5)
If we note:
we can write equation (4) in the following way: ¯ ¡ ¡ ¢ ¢¯ ¯x(t) ˙ − ai xi (t) + E i (t) + bi ¯ ≤ εi ⇒
(6)
¯ ¯ ¯x(t) ˙ − ai xi (t) − ai E i (t) − bi ¯ ≤ εi ⇔
(7)
¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ i i i i i ˙ − a x (t) + b − a E (t)¯ ≤ εi ⇔ ¯x(t) ¯ ¯ {z } | ¯ ¯ x˙ i (t)
(8)
¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ˙ − x˙ i (t) − ai E i (t)¯ ≤ εi . ¯x(t) ¯ ¯| {z } ¯ ¯ ˙i
(9)
E (t)
January 8, 2007
18:38
116
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A.G. Garcia et al.
The last step in all this development is to evaluate the differential inequality (9) and for that purpose, we can write it as follows: −εi ≤ E˙ i (t) − ai E i (t) ≤ εi , i = 1, .., r,
(10)
−ai ·t
and multiplying every side in (10) by exponential e , we get: ³ ´ i i i −e−a ·t εi ≤ e−a ·t E˙ i (t) − ai E i (t) ≤ e−a ·t εi , i = 1, .., r, whence: −e−a ·t εi ≤ i
i d ³ −ai ·t i ´ e E (t) ≤ e−a ·t εi , i = 1, .., r. dt
(11)
(12)
Integrating:
¡ i ¢−1 i i ai ·t E i (t) ≥ (a−1 a )ε + ea ·t E i (0), (13) i −e ³ ¡ ¢−1 ´ ¡ ¢ i i −1 E i (t) ≤ − ai + ea ·t ai · εi + ea ·t E i (0), i = 1, .., r. (14)
3. From Single to Multivariable Bounds As we were discussing in the last section, it is not so difficult to obtain upper and lower bounds when approximating the scalar functions with PWL. However, the multivariable case requires a more detailed analysis, and such a problem can be stated as follows: Let: £ ¤T ˙ X(t) = f (X), f (X) = f1 (X) f2 (X) · · · fn (X) , fi (.) ∈ U ⊂
(15) (16)
where T stands for transpose. Let us consider U divided in r simplices using a boundary configuration H as described in Ref. 8. Let £ i ¤T i i fPi W L (X) = f1PWL (X)f2PWL (X) · · · fnPWL (X) (17) be the PWL approximation of f on the ith -simplex. In what follows we use the idea presented in Ref. 8, p. 100, where the maximum norm was used in order to characterize the size of the error in the following way: ¯ ¯¯ i i ¯ f1 (X) − f1P W L (X) ≤ ε1 ¯ ¯ i i ¯ ¯f2 (X) − f2P W L (X) ≤ ε2 , i = 1, .., r. (18) .. . ¯ ¯ ¯ fn (X) − f i (X)¯ ≤ εin nP W L
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Approximate Solutions for Non-linear ODEs
We are looking for an error bound such that: ° ° °X − X i ° ≤ hi (εi ), i = 1, . . . , r, ∞ with
117
(19)
£ ¤T εi = εi1 εi2 · · · εin ,
where hi :
that is:
(22)
(23)
j
¯ i ¯ ¯e˙ j − Aij E i ¯ ≤ εij , £
(21)
(24)
¤T
where E i = ei1 ei2 · · · ein , i = 1, .., r. We can rewrite the expression (24) as follows: ¯ ¯¯ i i i¯ E ≤ εi1 e ˙ − A 1 1 ¯ ¯ ¯e˙ i − Ai E i ¯ ≤ εi 2 2 2 , i = 1, .., r, (25) .. . ¯ ¯¯ i e˙ n − Ain E i ¯ ≤ εin whence:
−εi1 ≤ e˙ i1 − Ai1 · E i ≤ εi1 −εi ≤ e˙ i − Ai · E i ≤ εi 2 2 2 2 , .. . i −εn ≤ e˙ in − Ain · E i ≤ εin
i = 1, .., r.
(26)
January 8, 2007
18:38
118
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A.G. Garcia et al.
Using matrix notation, (26) can be written in the following way: −εi ≤ E˙ i − Ai · E i ≤ εi , £ ¤T £ ¤ i0 i0 T where εi = εi1 εi2 · · · εin , Ai = Ai0 , i = 1, .., r. 1 A2 · · · An i Pre-multiplying by the exponential matrix e−A ·t , we obtain: −e−A
i
·t
· εi ≤ e−A
i
·t
(27)
i i · E˙ i − e−A ·t · Ai · E i ≤ e−A ·t · εi , i = 1, .., r. (28)
Then, we have: i i d h −Ai ·t e · E i (t) ≤ e−A ·t · εi , i = 1, .., r. dt Integrating each member of (29), Z t i i − e−A ·σ · dσ · εi ≤ e−A ·t · E i (t) − E i (0) 0 Z t i ≤ e−A ·σ · dσ · εi , i = 1, .., r, −e−A
i
·t
· εi ≤
(29)
(30) (31)
0
whence, the following upper and lower bounds are obtained Z t i Ai ·t i Ai ·t e · E (0) − e · e−A ·σ · dσ · εi ≤ E i (t) 0Z t i Ai ·t i Ai ·t ≤e · E (0) + e · e−A ·σ · dσ · εi , i = 1, .., r.
(32)
0
Finally, we must note that, in order to compute (32) it is necessary to i i evaluate not only the matrix eA ·t but also the matrix e−A ·t , which requires an extra computational effort, then the idea is to transform (32) into an i equivalent equation which only contains eA ·t . This can be done using the following equality: Z t Z t eA·t · e−A·σ · dσ = eA·σ · dσ. (33) 0
0
Finally, using (33) we can write (32) as follows: Z t i i eA ·t · E i (0) − eA ·σ · dσ · εi ≤ E i (t) 0Z t i Ai ·t i eA ·σ · dσ · εi , i = 1, .., r. ≤e · E (0) +
(34)
0
It is simple to verify that (34) is valid for the scalar case presented in Section 2 when the Ai , i = 1, .., r are invertible, we can write: h ³ ¡ ¢−1 ´ ³¡ ¢−1 ´i i i i i ·ε , − −Ai E i (t) ≤ eA ·t ·E i (0) + eA ·t · e−A ·t · − Ai (35) i = 1, .., r.
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Approximate Solutions for Non-linear ODEs
In this way: E i (t) ≤ eA
i
·t
h ¡ ¢−1 i i ¡ i ¢−1 i · E i (0) + Ai ·ε − A · ε , i = 1, .., r,
119
(36)
which is completely analogous to (14). The case which Ai , i = 1, .., r are not invertible will be developed in next section. 4. Further Analysis of the Bound Although the obtained bound (32) is valid in general, for practical purposes an expression that can be directly implemented is needed. To do this we can use any of the methodologies presented in Ref. 9 where a complete survey of the methodologies for computing the exponential matrix are presented and classified by categories: in particular we use here the eight methodology (see Ref. 9), since the optimal computational method is beyond the scope of this work. In this way we can write: eA·t = y0 (t) · I + y1 (t) · A + · · · + yn−1 (t) · An−1 ,
(37)
where yi (t), i = 1, .., n − 1 is the ith solution of the ODE given by: 0 = y (n) (t) + an−1 · y (n−1) (t) + · · · + a0 · y(t), n
n−1
(38)
(i)
with λ + an−1 · λ + · · · + a0 · λ = det(λ · I − A) and y (t), i = 0, .., n stands for the ith time derivative of y(t). Replacing (38) into (32) and considering only the superior bound (the inferior one is analogous), we get: £ ¤ E(t) ≤ y0 (t) · I + y1 (t) · A + · · · + yn−1 (t) · An−1 · E(0) Z t (39) £ ¤ + y0 (t) · I + y1 (t) · A + · · · + yn−1 (t) · An−1 · dσ · ε, 0
where E, ε and A stands for the variables on the ith simplex. This explicit form for the error bound allows to analyze how the structure of the matrix A impacts on each value of vector ε ∈
(40) −1
We first use a PWL approximation of this vector field (− tan 2 Simplices for x ∈ [0, 1] as shown in Figure 1-a.
(x)) with
January 8, 2007
18:38
120
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A.G. Garcia et al. 0 Non Linear Function PWL Approx. −0.2 a)
−0.4
−0.6
−0.8
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
0.4 Approximated Traj. True Trajectory Switching Times
0.3 b)
0.2
0.1
0
0
Fig.1.
1
(a) (b)
2
3
4
5 t[secs]
6
7
8
9
10
PWL approximation vs Nonlinear vector field. PWL trajectories vs real ones.
In this way a simple calculation shows that the vertex is allocated at x1 = 0.33333. Now we set the initial condition to x0 = 0.4. In order to establish the motion direction inside this simplex [0, 0.5] all we need to do is to analyze the closed-form expression for the PWL trajectory in this simplex: µ ¶ b b ea·t , x(t) = − + x0 + (41) a a (
Simplex 1: x ∈ [0, 0.5] ⇒ a1 = −0.9273, b1 = 0 Simplex 2: x ∈ [0.5, 1] ⇒ a1 = −0.6435, b1 = −0.1419
(42)
Then, for Simplex 1: x1 (t) = x0 e−0.9273·t ,
(43)
which is in fact a decreasing function of the time. This means that the solution remains in the present simplex since the evolution is going to an attractor allocated there (x = 0). In Figure 1 approximate and true trajectories are shown while the error and bounds on it are depicted in Figure 2. Notice that the prediction in Section 2 is verified in Figure 2 where the true error is between the upper and lower bounds.
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Approximate Solutions for Non-linear ODEs
121
0.2 Error Upper Bound Lower Bound 0.15
0.1
0.05
0
−0.05
−0.1
−0.15
−0.2
0
1
2
3
4
5
6
7
8
9
10
t[secs]
Fig. 2.
Error and error bounds (2 simplices).
The last comment regarding this ODE using only 2 simplices is that the PWL approximation for each simplex was obtained using the Least Squared Error (LSE) criterion and gives ε1 = 0.14, ε2 = 0.12. It turns out that for each simplex (in this case only one) the trajectory was calculated using a time step of 0.01 seconds. For this case, the following comparative results were obtained: Time Consumed by the PWL method=0.078 secs. Time Consumed by ODE45 =0.1880 secs.
(44)
Clearly, the PWL methodology exhibits an outstanding advantage regarding computational effort. In order to improve the quality of the upper and lower error bounds we increase the number of simplices to 5, obtaining the error bounds shown in Figure 3. In this case the values for εi , i = 1, .., 5 are: ε1 = 0.015, ε2 = 0.023, 3 ε = 0.025, ε4 = 0.023, ε5 = 0.02.The execution times were: Time Consumed by the PWL method=0.079 secs. Time Consumed by ODE45 =0.1880 secs.
(45)
January 8, 2007
18:38
122
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A.G. Garcia et al. 0.015 Error Upper Bound Lower Bound 0.01
0.005
0
−0.005
−0.01
−0.015
0
1
2
3
4
5
6
7
8
9
10
t[secs]
Fig. 3.
Error and error bounds (5 simplices).
5.2. Example 2: A batch bioprocess This example shows how the bound actually works in a real case. We consider the following bioprocess: µm · S(t) ˙ · X(t) = X(t) K + S(t) , X ∈ <+ , S ∈ <+ , (46) µm · S(t) ˙ S(t) = −α · · X(t) K + S(t) where µm , K and α are real and positive constants. This is a stable system and we expect that the bounds given in Section 3 are tight for simplices in a region shown in Figure 4 where only two simplices are considered. Figure 5 shows a plot for the real vector field we are going to work with. In Figure 4, the eigenvalues corresponding to the linear approximations on each simplex are given. The corresponding trajectories are drawn in Figure 6. If we increase the number of simplices to 4 we get the domain partition shown in Figure 7. With this new subdivision we improve the approximation and bounds as shown in Figure 8. As expected the new bounds are much better than the previous ones (compare Figures 6 and 8).
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Approximate Solutions for Non-linear ODEs 0.5 Phase−Portrait Simplex Division 0.45 λ1=0 0.4 λ2=−0.81919 0.35
0.3 y
0.25
0.2 λ =0.43034 1
0.15 λ2=−2.7756e−017 0.1
0.05
0 0.5
0.55
0.6
Fig. 4.
0.65
0.7
0.75 x
0.8
0.85
0.9
0.95
1
Domain Division (2 simplices).
Surface for µm.S.X/(K+S) 1
0.5
0 1
0.8
0.6
0.4
0.2
0
0
0.4
0.2
S
0.6
0.8
1
X
Surface for −α.µm.S.X/(K+S) 0
−0.5 1 0.8 0.6 0.4 0.2 0 S
Fig. 5.
0
0.2
0.4
0.6
0.8
1
X
Both Components of the Vector Field of the second example.
123
18:38
icaade
A.G. Garcia et al. α=1, K=1, µ =1 m
1
10
1
0
PWL. Real.
0.6 0.4
Error for X1. Upper bound for X1. Lower bound for X .
5
0.8
−5 0
10
20
−10
30
t[secs]
0.5
0
10
20
Error for X2. Upper bound for X2. Lower bound for X2.
0.2
0
30
t[secs]
0.4 PWL. Real.
0 −0.2
−0.5
0
10
20
−0.4
30
t[secs]
0.8
0
10
20
30
0.06
Phase−Portrait Simplex Division
0.6
Absolute Error for X1. t[secs] Absolute Error for X2.
0.04
0.4 0.02
0.2 0 0.5
0.6
0.7
0.8
0.9
0
1
0
10
Fig. 6.
20 t[secs]
x
Trajectories, errors and bounds (2 simplices).
0.5 Phase−Portrait Simplex Division 0.45 λ1=0 0.4 λ2=−0.77114
λ1=2.2204e−016
0.35 λ2=−0.55679 0.3
y
124
WSPC - Proceedings Trim Size: 9in x 6in
y
January 8, 2007
0.25 λ1=0.070832 0.2 λ2=5.5511e−017 0.15 λ1=0.46889 0.1
λ =2.7756e−017 2
0.05
0 0.5
0.55
0.6
0.65
0.7
0.75
0.8
0.85
0.9
0.95
x
Fig. 7.
Domain Division (4 simplices).
1
30
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Approximate Solutions for Non-linear ODEs
α=1, K=1, µ =1
Error for X1. Upper bound for X1. Lower bound for X1.
m
1
2 1
0.8 PWL. Real.
0.6 0.4
125
0 −1
0
2
4
6
8
t[secs]
0.8
−2
0
2
PWL. Real.
0.6
4
6
8
t[secs]
0.3 0.2
0.4
0.1
0.2
0
0
−0.1
0
2
4
0.8
6
8
2
4
0.06
t[secs] Phase−Portrait Simplex Division
Absolute Error for X1. Absolute Error for X2.
0.04
y
0.6
0
Error for X2. Upper bound for X2. Lower bound for X2. 6 8
0.4 0.02
0.2 0 0.5
0.6
0.7
0.8 x
Fig. 8.
0.9
1
0
0
2
4
6
8
t[secs] t[secs]
Trajectories, errors and bounds (4 simplices).
6. Conclusions A methodology for obtaining closed-form expressions for approximate solutions to a given set of ODEs has been presented. This methodology is endowed with an error bound which allows to evaluate how precise could be our approximate trajectories, which is a great advantage when compared with classical methodologies such as Runge-Kutta and Adam’s (see for instance Ref. 10 for details on how these methods obtain approximations for the errors). Using an example in <1 , the validity of the bound was analyzed and contrasted using two different partitions of the domain. A significant improveness of the error bounds is observed as the number of simplices increases. Finally, a real batch bioprocess example was presented in order to show the potential applications of our approach.
January 8, 2007
18:38
126
WSPC - Proceedings Trim Size: 9in x 6in
icaade
A.G. Garcia et al.
Acknowledgments This work was partially supported by ANPCyT, CONICET, CIC, SECyTUNS. References 1. N. Kazantis, N. Huynh and T. Good, A model-based characterization of the long-term asymptotic behavior of nonlinear discrete-time processes using invariance functional equations, Computer and Chemical Engineering, 29 (2005), 2346–2354. 2. A. Girard, Approximate solutions of ODEs using piecewise linear vector fields, Computer Algebra in Scientific Computing, (2002) 107–120. 3. J. de Swart and G. S¨ oderling, On the construction of error estimators for implicit Runge-Kutta methods, Journal of Computational and Applied Mathematics, 2 (1997), 347–358. 4. T. Roska and L. O. Chua, The CNN universal machine: An analogic array computer, IEEE Transactions on Circuits and Systems-II, 40 (1993), 163– 173. 5. S. Biagiola, A. Bandoni and J. L. Figueroa, Back-off application for dynamic optimization and control of nonlinear processes, European Symposium on Computer Aided Process Engineering, (2005), 1267–1272. 6. J. L. Figueroa and A. Desages, Dynamic back-off analysis: use of piecewise linear approximations, Optimal Control Applications and Methods, 24 (2003), 103–120. 7. M.A. Henson, Nonlinear model predictive control: current status and future directions, Computers and Chemical Engineering, 23 (1998), 187. 8. P. Juli´ an, A High Level Canonical Piecewise Linear Representation: Theory and applications, PhD dissertation, (Universidad Nacional del Sur, 1999). 9. C. Moler and C. Van Loan, Nineteen dubious ways to compute the exponential of a matrix, SIAM Review, 20 (1978), 801–837. 10. D. Kincaid and W. Cheney, Numerical Analysis. (Brooks/Cole Publishing Company, 1991).
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
127
ON THE INFLUENCE OF A SUBQUADRATIC CONVECTION TERM IN SINGULAR ELLIPTIC PROBLEMS b ˘ MARIUS GHERGUa and VICENT ¸ IU RADULESCU a
Institute of Mathematics “Simion Stoilow” of the Romanian Academy, P.O. BOX 1-764, RO-014700 Bucharest, Romania E-mail:
[email protected] b Department of Mathematics, University of Craiova, RO-200585 Craiova, Romania E-mail:
[email protected]
We establish some existence results for the singular elliptic equation −∆u = g(u) + λ|∇u|a + µf (x, u) either in a smooth bounded domain Ω ⊂ RN or in the whole space. We suppose that λ and µ are positive parameters, 0 < a ≤ 2, f is a nondecreasing function which is sublinear with respect to the second variable, and g ∈ C 1 (0, ∞) is a decreasing function such that lim g(s) = +∞. s&0
The analysis we develop in this paper emphasizes the central role played by the convection term |∇u|a . Keywords: Singular elliptic equation; Convection term; Maximum principle.
1. Introduction We are concerned in this paper with singular elliptic equations of the type −∆u = g(u) + λ|∇u|a + µf (x, u),
u>0
in Ω,
(1)
where Ω ⊂ RN (N ≥ 2) is either a smooth bounded domain or the whole space, 0 < a ≤ 2 and λ, µ ≥ 0. We suppose that g ∈ C 1 (0, ∞) is a positive nonincreasing function such that (g1) lim g(s) = +∞. s&0
We also assume that f : Ω × [0, ∞) → [0, ∞) is a H¨older continuous function such that f > 0 on Ω × (0, ∞) and is sub-linear with respect to the second variable, that is, f (x, s) is nonincreasing for all x ∈ Ω; (f 1) the mapping (0, +∞) 3 s 7−→ s
January 8, 2007
18:38
128
WSPC - Proceedings Trim Size: 9in x 6in
icaade
M. Ghergu & V. R˘ adulescu
(f 2) lim
s→∞
f (x, s) = 0, uniformly for x ∈ Ω. s
Problems of this type arise in the study of non-Newtonian fluids, boundary layer phenomena for viscous fluids, chemical heterogeneous catalysts, as well as in the theory of heat conduction in electrically conducting materials. Our general setting includes some simple prototype models from boundary-layer theory of viscous fluids (see Ref. 1). If λ = 0 and µ = 0, problem (1) is called the Lane-Emden-Fowler equation. Problems of this type, as well as the associated evolution equations, describe naturally certain physical phenomena. For example, super-diffusivity equations of this type have been proposed by de Gennes2 as a model for long range Van der Waals interactions in thin films spreading on solid surfaces. This equation also appears in the study of cellular automata and interacting particle systems with self-organized criticality (see Ref. 3), as well as to describe the flow over an impermeable plate (see Refs. 4,5). The main feature of this paper is the presence of the convection term |∇u|a . As remarked in Refs. 6,7, the requirement that the nonlinearity grows at most quadratically in |∇u| is natural in order to apply the maximum principle. In the case where λ = 0, the problem (1) subject to Dirichlet boundary condition has a unique solution for all µ ≥ 0 (see Refs. 8–11 and the references therein). If λ > 0, the following problem was considered in Zhang and Yu12 −α a in Ω, −∆u = u + λ|∇u| + σ (2) u>0 in Ω, u=0 on ∂Ω, where Ω is a smooth bounded domain, λ, σ ≥ 0, α > 0, and a ∈ (0, 2]. By using the change of variable v = eλu − 1 in the case a = 2, it is proved in Ref. 12 that problem (2) has classical solutions if λσ < λ1 , where λ1 is the first eigenvalue of −∆ in H01 (Ω). This will be used to deduce the existence and nonexistence in the case 0 < a < 2. If f (x, u) depends on u, the above change of variable does not preserve the sublinearity condition (f 1)–(f 2) and the monotony of the nonlinear term g in (1). In turn, if f (x, u) does not depend on u and a = 2, this method successfully applies to our study and we will be able to give a complete characterization of (1). Due to the singular term g(u) in (1), we cannot expect to have solutions
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Singular Elliptic Problems
129
in C 2 (Ω) for (1). As it was pointed out in Ref. 12, if α > 1 then the solution of (2) is not in C 1 (Ω). We are seeking in this paper classical solutions of (1), that is, solutions u ∈ C 2 (Ω) ∩ C(Ω) that verify (1).
2. Singular Elliptic Equations in Bounded Domains We present in this section some existence results for a −∆u = g(u) + λ|∇u| + µf (x, u) u>0 u=0
the problem in Ω, in Ω, on ∂Ω.
(3)
Theorem 2.1. Assume that conditions (f 1)–(f 2), (g1) are fulfilled and 0 < a ≤ 1. Then for all λ, µ ≥ 0 the problem (3) has at least one solution. Proof (Sketch). The proof relies on the sub and super-solution argument. Let us first notice that, by Ref. 13, there exists v ∈ C 2 (Ω) ∩ C(Ω) a solution of the problem in Ω, −∆v = g(v) (4) v>0 in Ω, v=0 on ∂Ω. Then uλµ = v is a sub-solution of (3). The main point is to find a supersolution uλµ ∈ C 2 (Ω) ∩ C(Ω) of (3). This will be done separately for 0 < a < 1 and a = 1. Since g is decreasing, we can easily obtain that uλµ ≤ uλµ in Ω so (3) has at least one solution. Case 0 < a < 1. Let h ∈ C 2 (0, η] ∩ C[0, η] be such that 00 for all 0 < t < η, h (t) = −g(h(t)), h(0) = 0, h > 0 in (0, η].
(5)
The existence of h follows by classical arguments of ODE. Since h is concave, there exists h0 (0+) ∈ (0, +∞]. By taking η > 0 small enough, we can assume that h0 > 0 in (0, η], so h is increasing on [0, η]. We also have Lemma 2.1. R1 (i) h ∈ C 1 [0, η] if and only if 0 g(s)ds < +∞; (ii) If 0 < p ≤ 2, then there exist c1 , c2 > 0 such that (h0 )p (t) ≤ c1 g(h(t)) + c2 ,
for all 0 < t < η.
(6)
January 8, 2007
18:38
130
WSPC - Proceedings Trim Size: 9in x 6in
icaade
M. Ghergu & V. R˘ adulescu
Now, we construct a super-solution in the form uλµ = M h(cϕ1 ) for M > 1 large enough and c > 0 sufficiently small, where ϕ1 represents the first eigenfunction of −∆ in H01 (Ω). Case a = 1. This case was left as an open problem in Ref. 14. Note that the method used in Case 0 < a < 1 applies here only for small values of λ and µ. Let R > 0 be large enough such that Ω ⊂ BR (0), where BR (0) = {x ∈ RN ; |x| < R}. We consider the problem |x| < R, −∆u = g(u) + λ|∇u| + µf (x, u) (7) u>0 |x| < R, u=0 |x| = R. In order to provide a super-solution for (7) let us first consider the problem |x| < R, −∆u = g(u) + λ|∇u| + 1 (8) u>0 |x| < R, u=0 |x| = R. We need the following auxiliary result. Lemma 2.2. Problem (8) has at least one solution. Proof. We are looking for radially symmetric solution u of (8), that is, u = u(r), 0 ≤ r = |x| ≤ R and N −1 0 u (r) = g(u(r)) + λ|u0 (r)| + 1 0 ≤ r < R, −u00 − r (9) u>0 0 ≤ r < R, u(R) = 0. This implies −(rN −1 u0 (r))0 ≥ 0 for all 0 ≤ r < R, which yields u0 (r) ≤ 0 for all 0 ≤ r < R. Then (9) gives µ ¶ N −1 0 00 0 u (r) + λu (r) = g(u(r)) + 1, 0 ≤ r < R. − u + r We obtain −(eλr rN −1 u0 (r))0 = eλr rN −1 (g(u(r)) + 1),
0 ≤ r < R.
(10)
From (10) we get Z t Z r u(r)=u(0) − e−λt t−N +1 eλs sN −1 (g(u(s)) + 1)dsdt, 0 ≤ r < R. (11) 0
0
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Singular Elliptic Problems
131
Let w ∈ C 2 (BR (0)) ∩ C(B R (0)) be the unique radial solution of the problem |x| < R, −∆w = g(w) + 1 (12) w>0 |x| < R, w=0 |x| = R. Clearly, w is a sub-solution of (8). As above we get Z r Z t −N +1 w(r) = w(0) − t sN −1 (g(w(s)) + 1)dsdt, 0
0 ≤ r < R.
(13)
0
We claim that there exists a solution v ∈ C 2 [0, R) ∩ C[0, R] of (11) such that v > 0 in [0, R). Let A = w(0) and define the sequence (vk )k≥1 inductively by Z r Z t −λt −N +1 e t eλs sN −1 (g(vk−1 (s)) + 1)dsdt, vk (r) = A − 0 0 (14) 0 ≤ r < R, k ≥ 1, v0 = w. Note that vk is decreasing in [0, R) for all k ≥ 0. From (13) and (14) we easily check that v1 ≥ v0 and by induction we deduce vk ≥ vk−1 for all k ≥ 1. Hence w = v0 ≤ v1 ≤ ... ≤ vk ≤ ... ≤ A
in BR (0).
Thus, there exists v(r) := lim vk (r), for all 0 ≤ r < R and v > 0 in [0, R). k→∞
We can now pass to the limit in (14) in order to get that v is a solution of (11). By classical regularity arguments we also obtain v ∈ C 2 [0, R)∩C[0, R]. This proves the claim. We have obtained a super-solution v of (8) such that v ≥ w in BR (0). Hence, the problem (8) has at least one solution and the proof of our Lemma is now complete. ¤ Let u ∈ C 2 (Ω) ∩ C(Ω) be a solution of the problem (8). For M > 1 we have −∆(M u) ≥ g(M u) + λ|∇(M u)| + M in Ω. Since f is sublinear, we can choose M = M (µ) > 1 such that M ≥ µf (x, M |u|∞ ) in BR (0). Then uλµ := M u is a super-solution for (1). This finishes the proof of Theorem 2.1. ¤ In the case 1 < a ≤ 2 we prove the following result.
January 8, 2007
18:38
132
WSPC - Proceedings Trim Size: 9in x 6in
icaade
M. Ghergu & V. R˘ adulescu
Theorem 2.2. Assume µ = 1 and f , g satisfy (f 1)–(f 2) and (g1) respectively. Then there exists λ∗ > 0 such that (1) has at least one classical solution for 0 ≤ λ < λ∗ and no solutions exist if λ > λ∗ . Proof. For small values of λ > 0 we can construct a super-solution of (3) in the same manner as in the proof of Theorem 2.1. Set A = { λ ≥ 0 : problem (1) has at least one classical solution}. From the above arguments, A is nonempty. Let λ∗ = sup A. First we claim that if λ ∈ A, then [0, λ) ⊆ A. For this purpose, let λ1 ∈ A and 0 ≤ λ2 < λ1 . If uλ1 is a solution of (1) with λ = λ1 , then uλ1 is a super-solution for (1) with λ = λ2 while v defined in (4) is a sub-solution. Hence, the problem (1) with λ = λ2 has at least one classical solution. This proves the claim. Since λ ∈ A was arbitrary chosen, we conclude that [0, λ∗ ) ⊂ A. Let us prove that λ∗ < +∞. For this purpose we use the following result Lemma 2.3. (see Ref. 15). If a > 1, then there exists a real number σ ¯>0 such that the problem ½ −∆u ≥ |∇u|a + σ in Ω, (15) u=0 on ∂Ω, has no solutions for σ > σ ¯. Set
³ τ :=
inf
´ g(s) + f (x, s) .
(x,s)∈Ω×(0,+∞)
Since lim g(s) = +∞ and the mapping (0, +∞) 3 s 7−→ min f (x, s) is s&0
x∈Ω
positive and nondecreasing, we deduce that m is positive. Let λ > 0 be such that (3) has a solution uλ . If w = λ1/(p−1) uλ , then v verifies p 1/(a−1) τ in Ω, −∆w ≥ |∇w| + λ (16) w>0 in Ω, w=0 on ∂Ω. By Lemma 2.3 it follows that λ1/(a−1) τ ≤ σ ¯ which gives λ ≤ (¯ σ /τ )a−1 . ∗ This means that λ is finite. This completes the proof. ¤ Theorems 2.1 and 2.2 show the importance of the convection term λ|∇u|a in (3). Indeed, according to Ref. 10, Theorem 1.3, for any µ > 0,
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Singular Elliptic Problems
the boundary value problem −α a β −∆u = u + λ|∇u| + µu u>0 u=0
in Ω, in Ω, on ∂Ω,
133
(17)
has a unique solution, provided λ = 0 and α, β ∈ (0, 1). The above theorems show that if λ is not necessarily 0, then the following situations may occur: (i) problem (17) has solutions if a ∈ (0, 1] and for all λ ≥ 0; (ii) if a ∈ (1, 2) then there exists λ∗ > 0 such that problem (17) has a solution for any λ < λ∗ and no solution exists if λ > λ∗ . To better understand the dependence between λ and µ in (3), let us consider the special case f ≡ 1 and let m := lim g(s) ∈ (0, +∞). s→∞
In this case the result concerning (3) is the following. Theorem 2.3. Assume that a = 2 and f ≡ 1. Then the following properties hold: (i) The problem (1) has a solution if and only if λ(m + µ) < λ1 ; λ1 . Then (1) has a unique (ii) Assume µ > 0 is fixed and let λ∗ = m+µ solution uλ for every 0 < λ < λ∗ and the sequence (uλ )0<λ<λ∗ is increasing with respect to λ. Moreover, if lim sup sα g(s) < +∞, for s&0
some α ∈ (0, 1), then the sequence of solutions (uλ )0<λ<λ∗ has the following properties: (ii1) uλ ∈ C 1,1−α (Ω) ∩ C 2 (Ω); (ii2) lim∗ uλ = +∞ uniformly on compact subsets of Ω. λ%λ
Remark. The assumption lim sup sα g(s) < +∞, for some α ∈ (0, 1), has s&0
been used in Ref. 8,10 and it implies the following Keller-Osserman-type growth condition around the origin ¶−1/2 Z 1 µZ t g(s)ds dt < +∞. (18) 0
0
As proved by B´enilan, Brezis and Crandall in Ref. 16, condition (18) is equivalent to the property of compact support, that is, for any h ∈ L1 (RN ) with compact support, there exists a unique u ∈ W 1,1 (RN ) with compact support such that ∆u ∈ L1 (RN ) and −∆u = g(u) + h a.e. in RN .
January 8, 2007
18:38
134
WSPC - Proceedings Trim Size: 9in x 6in
icaade
M. Ghergu & V. R˘ adulescu
Proof of Theorem 2.3. With the change of variable v = eλu − 1, the problem (1) takes the form −∆v = Ψλµ (x, u) in Ω, (19) v>0 in Ω, v=0 on ∂Ω, where Ψλµ (x, s) = λ(s + 1)g
µ
¶ µ ¶ 1 1 ln(s + 1) + λµ(s + 1)f x, ln(s + 1) , λ λ
for all (x, s) ∈ Ω × (0, ∞). The existence and nonexistence results follow now from Ref. 14, Theorem 2.4. In order to prove the asymptotic behavior of the solution near λ∗ we use the following alternative which is due to H¨ormander (see Ref. 17, Theorem 4.1.9). Proposition 2.1. Let (uλ )0<λ<λ∗ be a sequence of positive super-harmonic functions which are increasing with respect to λ. Then the following alternative holds: (i) either uλ converges in L1loc (Ω); (ii) or uλ → ∞ uniformly on compact subsets of Ω. 3. Ground State Solutions for Singular Elliptic Problems We consider in this section the following singular problem a in RN , (N ≥ 3), −∆u = p(x)(g(u) + f (u) + |∇u| ) u>0 in RN , u(x) → 0 as |x| → ∞,
(20)
where f and g satisfy (f 1)–(f 2) and (g1), 0 < a < 1, and p : RN → (0, ∞) is a H¨older continuous function of exponent γ ∈ (0, 1). We are concerned here with ground state solutions, that is, positive solutions defined in the whole space and decaying to zero at infinity. The case f ≡ 0 and a = 0 was considered in Lair and Shaker18 . More exactly, it was proved in Ref. 18 that a necessary condition in order to have solution for the problem in RN , −∆u = p(x)g(u) (21) u>0 in RN , u(x) → 0 as |x| → ∞,
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Singular Elliptic Problems
is
Z
135
∞
tψ(t)dt < ∞,
(22)
1
where ψ(r) = min p(x), r ≥ 0. Note that condition (22) is also necessary |x|=r
for our problem (20), since any solution of (20) is a super-solution of (21). The sufficient condition for existence supplied in Ref. 18 is Z ∞ tϕ(t)dt < ∞, (23) 1
where ϕ(r) = max p(x), r ≥ 0. Hence, when p is radially symmetric, the |x|=r Z ∞ problem (21) has solutions if and only if tp(t)dt < ∞ (see Ref. 18). 1
Our result concerning the problem (20) is the following. Theorem 3.1. Assume that (f 1)–(f 2), (g1) and (23) are fulfilled. Then problem (20) has at least one solution. 2,γ Proof. The solution of problem (20) is obtained as a limit in Cloc (RN ) of a monotone sequence of solutions associated to (20) in smooth bounded domains. Let Bn := {x ∈ RN ; |x| < n}. According to Theorem 2.1, for all n ≥ 1 there exists un ∈ C 2,γ (Bn ) ∩ C(Bn ) such that a in Bn , −∆un = p(x)(g(un ) + f (un ) + |∇un | ) (24) u >0 in Bn , n un = 0 on ∂Bn .
We extend un by zero outside of Bn . We claim that un ≤ un+1 in Bn . Assume by contradiction that the inequality un ≤ un+1 does not hold throughout Bn and let ζ(x) =
un (x) , un+1 (x)
x ∈ Bn .
Clearly ζ = 0 on ∂Bn , so that ζ achieves its maximum in a point x0 ∈ Bn . At this point we have ∇ζ(x0 ) = 0 and ∆ζ(x0 ) ≤ 0. This yields ³ ´ −div(u2n+1 ∇ζ)(x0 ) = − div(u2n+1 )∇ζ + u2n+1 ∆ζ (x0 ) ≥ 0. A straightforward computation shows that −div(u2n+1 ∇ζ) = −un+1 ∆un + un ∆un+1 . Hence
³
´ − un+1 ∆un + un ∆un+1 (x0 ) ≥ 0.
January 8, 2007
18:38
136
WSPC - Proceedings Trim Size: 9in x 6in
icaade
M. Ghergu & V. R˘ adulescu
The above relation produces ¶ µ g(un ) + f (un ) g(un+1 ) + f (un+1 ) − (x0 )+ un un+1 ¶ µ |∇un+1 |a |∇un |a − (x0 ) ≥ 0. + un un+1
(25)
g(t) + f (t) is decreasing on (0, ∞) and un (x0 ) > un+1 (x0 ), t from (25) we obtain ¶ µ |∇un+1 |a |∇un |a − (x0 ) > 0. (26) un un+1 Since t 7−→
On the other hand, ∇ζ(x0 ) = 0 implies un+1 (x0 )∇un (x0 ) = un (x0 )∇un+1 (x0 ). a−1 Furthermore, relation (26) leads us to ua−1 n (x0 ) − un+1 (x0 ) > 0, which is a contradiction since 0 < a < 1. Hence un ≤ un+1 in Bn which means that
0 ≤ u1 ≤ · · · ≤ un ≤ un+1 ≤ . . .
in RN .
The main point is to find an upper bound for the sequence (un )n≥1 . To this aim, set Z r Φ(r) = r1−N tN −1 ϕ(t)dt, for all r > 0. 0
Using the assumption (23) and L’Hˆopital’s rule, we get lim Φ(r) = r→∞
lim Φ(r) = 0 and
r&0
1 lim Φ(r) = r→∞ N −2
Z
∞
rϕ(r)dr < ∞. 0
Let k > 2 be such that k 1−a ≥ 2 max Φa (r) and define r≥0
Z
∞
Φ(t)dt,
ξ(x) = k
for all x ∈ RN .
|x|
Then ξ satisfies −∆ξ = kϕ(|x|) ξ>0 ξ(x) → 0
in RN , in RN , as |x| → ∞.
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Singular Elliptic Problems
Z
137
t
1 ds ∈ [0, ∞) is bijective, we 0 g(s) + 1 → (0, ∞) by
Since the mapping [0, ∞) 3 t 7−→
can implicitly define w : RN Z w(x) 1 dt = ξ(x), g(t) +1 0
for all x ∈ RN .
It is easy to see that w ∈ C 2 (RN ) and w(x) → 0 we have a −∆w ≥ p(x)(g(w) + 1 + |∇w| ) w>0 w(x) → 0
as |x| → ∞. Furthermore, in RN , in RN , as |x| → ∞.
(27)
Using the assumption (f 1), we can find M > 1 large enough such that M > f (M w) in RN . Multiplying by M in (27) we deduce that v := M w satisfies a in RN , −∆v ≥ p(x)(g(v) + f (v) + |∇v| ) v>0 in RN , v(x) → 0 as |x| → ∞. With the same proof as above we deduce that un ≤ v in Bn , for all n ≥ 1. This implies 0 ≤ u1 ≤ · · · ≤ un ≤ v in RN . Thus, there exists u(x) = lim un (x), for all x ∈ RN and un ≤ u ≤ v in RN . Since v(x) → 0 n→∞
as |x| → ∞, we deduce that u(x) → 0 as |x| → ∞. A standard bootstrap 2,γ argument (see Gilbarg and Trudinger19 ) implies that un → u in Cloc (RN ) and that u is a solution of problem (20). This completes the proof of Theorem 3.1. ¤ Acknowledgments. The authors have been supported by Grant 2-CEx0611-18/2006. References 1. J.S.W. Wong, On the generalized Emden-Fowler equation, SIAM Review, 17 (1975), 339–360. 2. P.G. de Gennes, Wetting: statics and dynamics, Review of Modern Physics, 57 (1985), 827–863. 3. J.T. Chayes, S.J. Osher and J.V. Ralston, On singular diffusion equations with applications to self-organized criticality, Comm. Pure Appl. Math., 46 (1993), 1363, 1377. 4. A. Callegari and A. Nashman, Some singular nonlinear equations arising in boundary layer theory, J. Math. Anal. Appl., 64 (1978), 96–105.
January 8, 2007
18:38
138
WSPC - Proceedings Trim Size: 9in x 6in
icaade
M. Ghergu & V. R˘ adulescu
5. A. Callegari and A. Nashman, A nonlinear singular boundary value problem in the theory of pseudoplastic fluids, SIAM J. Appl. Math., 38 (1980), 275– 281. 6. Y. Choquet-Bruhat and J. Leray, Sur le probl`eme de Dirichlet quasilin´eaire d’ordre 2, C. R. Acad. Sci. Paris, Ser. A, 274 (1972), 81–85. 7. J. Kazdan and F.W. Warner, Remarks on some quasilinear elliptic equations, Comm. Pure Appl. Math., 28 (1975), 567–597. 8. F.-C. Cˆırstea, M. Ghergu, and V. R˘ adulescu, Combined effects of asymptotically linear and singular nonlinearities in bifurcation problems of LaneEmden-Fowler type, J. Math. Pures Appliqu´ees, 84 (2005), 493–508. 9. M.M. Coclite and G. Palmieri, On a singular nonlinear Dirichlet problem, Comm. Partial Differential Equations, 14 (1989), 1315–1327. 10. M. Ghergu and V. R˘ adulescu, Sublinear singular elliptic problems with two parameters, J. Differential Equations, 195 (2003), 520–536. 11. J. Shi and M. Yao, On a singular nonlinear semilinear elliptic problem, Proc. Royal Soc. Edinburgh Sect. A, 128 (1998), 1389–1401. 12. Z. Zhang and J. Yu, On a singular nonlinear Dirichlet problem with a convection term, SIAM J. Math. Anal., 4 (2000), 916–927. 13. M.G. Crandall, P. H. Rabinowitz and L. Tartar, On a Dirichlet problem with a singular nonlinearity, Comm. Partial Differential Equations, 2 (1977), 193–222. 14. M. Ghergu and V. R˘ adulescu, Multiparameter bifurcation and asymptotics for the singular Lane-Emden-Fowler equation with convection term, Proc. Royal Soc. Edinburgh Sect. A, 135 (2005), 61–84. 15. N.E. Alaa and M. Pierre, Weak solutions of some quasilinear elliptic equations with data measures, SIAM J. Math. Anal., 24 (1993), 23–35. 16. P. B´enilan, H. Brezis, and M. Crandall, A semilinear equation in L1 (RN ), Ann. Scuola Norm. Sup. Pisa, 4 (1975), 523–555. 17. L. H¨ ormander, The Analysis of Linear Partial Differential Operators I, (Springer-Verlag, Berlin Heidelberg New York, 1983). 18. A.V. Lair and A.W. Shaker, Classical and weak solutions of a singular semilinear elliptic problem, J. Math. Anal. Appl., 211 (1997), 371–385. 19. D. Gilbarg and N.S. Trudinger, Elliptic Partial Differential Equations of Second Order, 2nd ed., (Springer-Verlag, Berlin Heidelberg New York, 1983).
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
139
EXISTENCE AND UNIQUENESS RESULTS IN THE MICROPOLAR MIXTURE THEORY OF POROUS MEDIA IONEL-DUMITREL GHIBA “Octav Mayer” Mathematics Institute, Romanian Academy of Science, Ia¸si Branch, Bd. Carol I, nr. 8, 700506-Ia¸si, Romania E-mail: ghiba
[email protected] In this paper we study the existence and uniqueness of solutions for the initialboundary value problem of a micropolar binary mixture. We use some results of the semigroup theory of linear operators to obtain an existence and uniqueness theorem for the initial value problem with homogeneous Dirichlet boundary conditions. Continuous dependence of the solutions upon the initial data and supply terms is also established. Keywords: Micropolar mixture; Micropolar elastic solid; Incompressible micropolar viscous fluid; Existence; Uniqueness; Continuous dependence.
1. Introduction In Ref. 1 Eringen has developed a continuum theory for a mixture of a micropolar elastic solid and a micropolar viscous fluid. All materials, whether natural or synthetic, possess microstructures. The material points of porous solids and dirty fluids undergo translation and rotations. Classical elasticity and fluid dynamics ignore the rotational degrees of freedom. In the micropolar continuum theory, the rotational degrees of freedom play a central role. Thus, we have six degrees of freedom, instead of the three degrees of freedom considered in classical elasticity and fluid mechanics. A material point of micropolar continuum is endowed with three rigid directors whose rotations provide the intrinsic rotations of the material point (see Refs. 2,3). The continuum theory of mixtures has been a subject of intensive study in literature. A presentation of the work on the subject can be found in a review article by Bowen4 . In classical theories of mixtures, the rotational degrees of freedom are ignored.
January 8, 2007
18:38
140
WSPC - Proceedings Trim Size: 9in x 6in
icaade
I.-D. Ghiba
The microstructural motions are observed to produce new effects that cannot be accounted for the classical translatory degrees of freedom alone that are used to formulate classical mixture theories. A large class of engineering materials, as well as soils, rocks, granular materials, sand and underground water mixtures may be modeled more realistically by means the theory proposed by Eringen1 . Consolidation problems in the building industry, earthquake problems and oil exploration problems fall into the domain of this theory. For the classical isothermal theory of a mixture consisting of three component: an elastic solid, a viscous fluid and a gas some results concerning uniqueness and continuous dependence have been studied by Gale¸s5 . Some results have been established in Ref. 6 concerning the existence and uniqueness of solutions in the case when the thermal effects are present, but the time derivative of temperature is not present into the set of independent variables. We outline that the general theorems concerning the uniqueness and continuous data dependence of solutions in the thermal theory of a mixture consisting of three component have been established by Chirit¸˘a7 . We recall that the existence and uniqueness results in the classical theories of mixtures have been obtained using the semigroup theory by Mart´ınez and Quintanilla8 and Gale¸s6 . In the present paper we consider the linear theory of a binary homogeneous mixture of an isotropic micropolar elastic solid with an incompressible micropolar viscous fluid and we formulate the basic initial-boundary value problem. Within this theory some uniqueness and continuous dependence results have been established in Ref. 9. The main purpose of this paper is to establish some existence and uniqueness results for the solutions of the initial-boundary problems associated with the theory in question. The paper also investigates the continuous dependence of solution with respect to the initial data and supplies terms. We transform the initial boundary value problem in an abstract equation in an appropriate Hilbert space and then we use the results of the semigroups theory of linear operators (see Refs. 10,11) in order to obtain the existence, uniqueness and continuous dependence results. 2. Preliminaries We consider a binary homogeneous mixture of an isotropic micropolar elastic solid with an incompressible micropolar viscous fluid. Both continuous bodies are considered to occupy a bounded domain Ω of the threedimensional space, whose boundary is regular surface ∂Ω.
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Existence and Uniqueness in the Micropolar Mixture Theory
141
We refer the motion of a continuum to a fixed system of rectangular Cartesian axes Oxk (k = 1, 2, 3). The Latin subscripts are understood to range over the integers 1, 2, 3 and superscripts s, f denote respectively, the micropolar elastic solid and the incompressible micropolar fluid. Summation over repeated subscripts and other typical conventions for differential operations are implied such as a superposed dot or comma followed by a subscript to denote the partial derivative with respect to the time or the corresponding cartesian coordinate. Let ρα 0 denote the density of the αth constituent and ρ0 the density of the mixture at time t = 0. We denote by α uα i the displacement vector fields and by ϕi the rotation vector fields of the αth constituent. The fundamental equations for mechanical behaviour of the mixture in the framework of the linearized theory developed by Eringen1 are — balance of momentum α α α ˆα ¨α ρα 0u i , i = tji,j + ρ0 fi + p X α pˆi = 0,
(α = f, s), (1)
α=s,f
tα ji ,
where fiα and pˆα i are, respectively, the stress tensor, the body force density and the force exerted on the αth constituent from the other constituent; — balance of moment of momentum α α α α α ˆα ¨i = mα ρα 0j ϕ i , ji,j + εijk tjk + ρ0 li + m X α m ˆ i = 0,
(α = f, s), (2)
α=s,f α α where j α , ϕα ˆα i , mji , li , m i are respectively, microinertia density, rotation rate (gyration), couple stress, body couple density, the couple exerted on the αth constituent from the other constituent and εijk denotes the permutation symbol;
— energy conservation K −C0 T˙ + (−β0 T0 + ζ)u˙ si,i + T,ii + ρ0 h = 0, T0
(3)
where h, T, T0 are respectively, the energy source, the temperature change and the initial temperature for the mixture and C0 , β0 , ζ, K are the micropolar thermoelastic coefficients; — incompressibility condition u˙ fi,i = 0.
(4)
January 8, 2007
18:38
142
WSPC - Proceedings Trim Size: 9in x 6in
icaade
I.-D. Ghiba
The constitutive equations for a homogeneous mixture of an isotropic micropolar elastic solid and an incompressible micropolar viscous fluid are tsji = −β0 T δji + λs usk,k δji + µs (usj,i + usi,j ) + k s (usi,j + εijk ϕsk ), msji = αs ϕsk,k δji + β s ϕsj,i + γ s ϕsi,j , tfji = −π f δji + µf (u˙ fj,i + u˙ fi,j ) + k f (u˙ fi,j + εijk ϕ˙ fk ),
(5)
mfji = αf ϕ˙ fk,k δji + β f ϕ˙ fj,i + γ f ϕ˙ fi,j , pˆsi = −ˆ pfi = −ξ(u˙ si − u˙ fi ) −
ζ T,i , T0
m ˆ si = −m ˆ fi = −$(ϕ˙ si − ϕ˙ fi ), where π f is the micropolar fluid pressure, β0 , λs , µs , k s , αs , β s , γ s are the micropolar thermoelastic coefficients for the isotropic micropolar elastic solid, µf , k f , αf , β f , γ f are the micropolar fluid viscosities and ζ, K, ξ, $ are the micropolar thermoelastic coefficients of the mixture. The local form of the Clausius-Duhem inequality (see Ref. 1) implies that the dissipation potential ˙ s , u˙ f , ϕ ˙ f , T ), (u˙ s , ϕ ˙ s , u˙ f , ϕ ˙ f , T )] = Φ[(u˙ s , ϕ = µf u˙ fj,i u˙ fi,j + (µf + k f )u˙ fi,j u˙ fi,j + 2k f εijk u˙ fi,j ϕ˙ fk + 2k f ϕ˙ fi ϕ˙ fi + + αf ϕ˙ fk,k ϕ˙ fi,i + β f ϕ˙ fj,i ϕ˙ fi,j + γ f ϕ˙ fi,j ϕ˙ fi,j + ξ(u˙ si − u˙ fi )(u˙ si − u˙ fi )+ T,i K + $(ϕ˙ si − ϕ˙ fi )(ϕ˙ si − ϕ˙ fi ) + 2 T,i T,i , + 2ζ(u˙ si − u˙ fi ) T0 T0
(6)
must be a positive semidefinite quadratic form in term of u˙ fi,j , ϕ˙ fi , ϕ˙ fi,j , T,i and ϕ˙ si − ϕ˙ fi . u˙ si − u˙ fi , T0 This is true if and only if ξK − ζ 2 ≥ 0,
K ≥ 0,
2µf + k f ≥ 0, f
f
f
k f ≥ 0,
3α + β + γ ≥ 0,
f
(7) f
γ + β ≥ 0,
f
f
γ − β ≥ 0,
$ ≥ 0.
It is convenient to introduce the following dimensionless quantities t uα x ¯α = , ϕ ¯α = ϕα , x ¯ = , t¯= , u L τ L (8) T0 L3 α T α ¯ ¯ ρ , (α = s, f ), , ρ¯0 = T = , T0 = m 0 Tˆ Tˆ where L, τ, Tˆ and m are constants with dimension of length, time, temperature and mass respectively. With these quantities we can write the system (1)–(4) in the form
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Existence and Uniqueness in the Micropolar Mixture Theory
143
¯s + µ ¯u ¨¯si = (λ ρ¯s0 u ¯s )¯ usj,ij + (¯ µs + k¯s )¯ usi,jj + k¯s εijk ϕ¯sk,j − ξ( ¯˙ si − u ¯˙ fi )− ¶ µ ¯ ζ − ¯ + β¯0 T¯,i + ρ¯s0 f¯is , T0 ρ¯s ¯j s ϕ¨¯s = (¯ αs + β¯s )ϕ¯s + γ¯ s ϕ¯s + k¯s (εijk u ¯s − 2ϕ¯s )− 0
i
¨¯fi = ρ¯f0 u
j,ij i,jj f s s s ¯ − $( ¯ ϕ¯˙ i − ϕ¯˙ i ) + ρ¯0 li , −¯ π,if + (¯ µf + k¯f )u ¯˙ fi,jj +
k,j
i
¯u k¯f εijk ϕ¯˙ fk,j + ξ( ¯˙ si − u ¯˙ fi )+
ζ¯ + ¯ T¯,i + ρ¯f0 f¯if , T0 ρ¯f0 ¯j f ϕ¨¯fi = (¯ αf + β¯f )ϕ¯˙ fj,ij + γ¯ f ϕ¯˙ fi,jj + k¯f (εijk u ¯˙ fk,j − 2ϕ¯˙ fi )+ + $( ¯ ϕ¯˙ s − ϕ¯˙ f ) + ρ¯f ¯lf , i
i
(9)
0 i
¯ K ¯ ¯u 0 = −C¯0 T¯˙ + (−β¯0 T¯0 + ζ) ¯˙ si,i + ¯ T¯,ii + ρ¯0 h, T0 u ¯˙ fi,i = 0, where subscripts preceded by comma denote partial differentiation respect to x ¯, superposed dot denotes partial differentiation respect to t¯ and 2 Lτ 2 s ¯s Lτ 2 s ¯ s = Lτ λs , µ ¯s = µ , k = k , λ m m m Lτ f Lτ f ¯f µ , k = k , µ ¯f = m m 2 2 τ τ2 s τ αs , β¯s = β s , γ¯ s = γ , α ¯s = Lm Lm Lm τ f τ f τ f ¯f α , β = β , γ¯ f = γ α ¯f = Lm Lm Lm L3 τ Lτ 2 Lτ ξ, ζ¯ = ζ, $ $, ξ¯ = ¯ = m m m 3 Lτ 2 Tˆ Lτ 2 Tˆ ¯ = Kτ , β0 , C¯0 = C0 , K β¯0 = m m Lm 2 2 τ τ 1 α α α α α ¯j = j , f¯i = f , ¯li = 2 li , (α = s, f ), L2 L i L 2 2 3 L τ τ ¯= h, π ¯f = π f , ρ¯0 = ρ¯s0 + ρ¯f0 . h L2 m
(10)
To these equations we have to adjoin the following boundary conditions ¯ u ¯α ¯α i = 0, ϕ i = 0, T = 0 on ∂Ω × [0, t1 ), (α = s, f )
(11)
January 8, 2007
18:38
144
WSPC - Proceedings Trim Size: 9in x 6in
icaade
I.-D. Ghiba
and the following initial conditions u ¯α x, 0) = 0 uα x), u ¯˙ α x, 0) = 0 u˙ α x), T¯(¯ x, 0) = 0 T (¯ x), i (¯ i (¯ i (¯ i (¯ α α α α ¯ (α = s, f ), ϕ¯ (¯ x, 0) = 0 ϕ (¯ x), ϕ¯˙ (¯ x, 0) = 0 ϕ˙ i (¯ x), x ¯ ∈ B, i
i
(12)
i
α α α where aα ˙α ˙α i , 0 ϕi , 0 ϕ i and 0 T are prescribed continuous funci , ϕi , Q, 0 ui , 0 u tions. From the relations (10) we can remark that if the constitutive constants of mixture satisfy the inequalities (7), then the corresponding dimensionless constitutive constants satisfy the same type of inequalities. We define the following dimensionless quantities corresponding to the stress tensor and the couple stress of the two constituents and to the force and the couple exerted on the αth constituent from the other constituent ¯su t¯s = −β¯0 T¯δji + λ ¯s δji + µ ¯s (¯ us + u ¯s ) + k¯s (¯ us + εijk ϕ¯s ), ji
j,i
k,k
i,j
=α ¯
= −¯ π f δji + µ ¯f (u ¯˙ fj,i + u ¯˙ fi,j ) + k f (u ¯˙ fi,j + εijk ϕ¯˙ fk ),
¯ˆ s m i
ϕ¯sk,k δji
i,j
t¯fji m ¯ fji p¯ˆsi
s
=α ¯ f ϕ¯˙ fk,k δji + β¯f ϕ¯˙ fj,i + γ¯ f ϕ¯˙ fi,j , ζ¯ = −p¯ˆfi = −ξ(u ¯˙ si − u ¯˙ fi ) − ¯ T¯,i , T0 f f s ¯ = −m ˆ = −$( ¯ ϕ¯˙ − ϕ¯˙ ), i
k
+ β¯s ϕ¯sj,i + γ¯ s ϕ¯si,j ,
m ¯ sji
i
(13)
i
With these quantities we can write the equations (8) in the same forms with the equations (1)–(4). In this paper we shall assume that the densities ρ¯s0 , ρ¯f0 are strictly positive and ¯ s + 2¯ 3λ µs + k¯s ≥ 0, 2¯ µs + k¯s ≥ 0, k¯s ≥ 0, (14) 3¯ αs + β¯s + γ¯ s ≥ 0, γ¯ s + β¯s ≥ 0, γ¯ s − β¯s ≥ 0, C¯0 > 0. In what follows we will study the existence and uniqueness of solution of the initial-boundary value problem defined by the equations (9), the boundary conditions (11) and the initial conditions (12). 3. Existence and Uniqueness Results In this section we use the results of the semigroup theory of linear operators to establish an existence theorem to the equations that characterize the linear theory of a binary homogeneous mixtures of an isotropic micropolar elastic solid with an incompressible micropolar viscous fluid. Firstly, we transform our initial boundary value problem defined by the relations (9), (11) and (12) to an abstract problem on an appropriate Hilbert space.
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Existence and Uniqueness in the Micropolar Mixture Theory
145
In order to simplify the notation, we suppress the superposed bar throughout in what follows. Let us define X = {w=(us , vs , ϕs , ν s , vf , ν f , T ); us ∈H10 (Ω), vs ∈L2 (Ω), ϕs ∈H10 (Ω), ν s ∈L2 (Ω), vf ∈H(Ω), ν f ∈L2 (Ω), T ∈L2 (Ω)},
(15)
where L2 (Ω) = [L2 (Ω)]3 , H10 (Ω) = [H01 (Ω)]3 , H(Ω) is the closure of the 2 space Y = {u ∈ C∞ 0 (Ω); ui,i = 0 on Ω, ui ni = 0 on ∂Ω} in L (Ω) (see Ref. 12) and H01 (Ω) is the well known Sobolev space (see Ref. 13). Because Ω is open, bounded, connected of class C 2 , we have (see Ref. 12) L2 (Ω) = H ⊕ H1 ⊕ H2 ,
(16)
where H, H1 , H2 are mutually orthogonal spaces, H1 = {u ∈ L2 (Ω); u = grad p, p ∈ H1 (Ω), ∆p = 0}
(17)
and H2 = {u ∈ L2 (Ω); u = grad q, q ∈ H10 (Ω)}.
(18)
Further, we introduce the operators s As1 i w = vi , · 1 s2 Ai w = s (λs + µs )usj,ij + (µs + k s )usi,jj + k s εijk ϕsk,j − ρo ¶ ¸ µ ζ f s + β0 T,i , −ξ(vi − vi ) − T0 s As3 i w = νi , 1 s s s s s s s s As4 i w = f f [(α + β )ϕj,ij + γ ϕi,jj + k (εijk uk,j − 2ϕi )− ρ0 j
−$(νis − νif )], · ¸ 1 ζ f1 f f f f f f s Ai w = f P (µ + k )vi,jj + k εijk νk,j + ξ(vi − vi ) + T,i , T0 ρ0 1 f f f Afi 2 w = f [(αf + β f )νj,ij + γ f νi,jj + k f (εijk vk,j − νif )+ ρ0 j f +$(νis − νif )], ·µ ¶ ¸ ζ K T0 s T −β0 + vi,i + 2 T,ii , Ai w = C0 T0 T0
(19)
where P : L2 (Ω) → H(Ω) is the Leray Projector. Let A be the operator A = (As1 , As2 , As3 , As4 , Af 1 , Af 2 , AT )
(20)
January 8, 2007
18:38
146
WSPC - Proceedings Trim Size: 9in x 6in
icaade
I.-D. Ghiba
with the domain D(A) = {w = (us , vs , ϕs , ν s , vf , ν f , T ) ∈ X; Aw ∈ X, vf = 0, ν f = 0, T = 0 on ∂Ω}.
(21)
∞ ∞ ∞ ∞ ∞ We note that C∞ 0 (Ω)×C0 (Ω)×C0 (Ω)×C0 (Ω)×V(Ω)×C0 (Ω)×C0 (Ω), where V(Ω) = H10 (Ω) ∩ H2 (Ω) ∩ H(Ω), is a dense subset of X (see Ref. 12) which is contained in D(A). The boundary initial value problem (9), (11) and (12) can be transformed into the following abstract equation in the Hilbert space X
dw (t) = Aw(t) + F (t), w(0) = w0 , dt where
µ F (t) =
0, f s , 0,
ρ0 T0 1 s 1 l , P (f f ), f lf , h js j C0
(22) ¶
and ˙ s , 0 u˙ f , 0 ϕ ˙ f , 0 T ). w0 = (0 us , 0 u˙ s , 0 ϕs , 0 ϕ Because the problem is linear, if vf and ν f are known the displacement and the rotation of fluid can be obtained by a simple integration. We introduce the following inner product in X es , ϕ e s, ν es, v ef , ν e f , Te)iX = h(us , vs , ϕs , ν s , vf , ν f , T ), (e us , v ½ Z C0 e TT+ = ρs0 vis veis + ρf0 vif veif + ρs0 j s νis νeis + ρf0 j f νif νeif + T0 Ω ¾ s s s es +E[(u , ϕ ), (e u , ϕ )] dv,
(23)
where e s )] = λs usk,k u E[(us , ϕs ), (e us , ϕ esk,k + µs usj,i u esj,i + (µs + k s )usi,j u esi,j + + k s εijk (usi,j ϕ esk + u esi,j ϕsk ) + 2k s ϕsi ϕ esi +
(24)
+ αs ϕsk,k ϕ esi,i + β s ϕsj,i ϕ esi,j + γ s ϕsi,j ϕ esi,j . In view of the assumptions (14) we have E[(us , ϕs ), (us , ϕs )] ≥ σm (usi,j usi,j + ϕsi ϕsi + ϕsi,j ϕsi,j )
(25)
σM (usi,j usi,j + ϕsi ϕsi + ϕsi,j ϕsi,j ) ≥ E[(us , ϕs ), (us , ϕs )],
(26)
and
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Existence and Uniqueness in the Micropolar Mixture Theory
147
where σm = min{2µs + k s , k s , 3λs + 2µs + k s , 3αs + β s + γ s , β s + γ s }, σM = max{2µs + k s , k s , 3λs + 2µs + k s , 3αs + β s + γ s , β s + γ s }. As a consequence, we have that the norm induced by E is equivalent to the usual norm in H10 (Ω) × H10 (Ω). Thus h , i defines a norm equivalent to the usual norm in X. Lemma 3.1. The operator A is dissipative, that is hAw, wiX ≤ 0, for all w ∈ D(A).
(27)
Proof. First of all we note that, in view of the relations (10)–(12), we can find p ∈ H1 (Ω) with ∆p = 0 and q ∈ H10 (Ω) so that ¸ · ζ f f P (µf + k f )vi,jj + k f εijk νk,j + ξ(vis − vif ) + T,i = T0 (28) ζ f f f f f f s = (µ + k )vi,jj + k εijk νk,j + ξ(vi − vi ) + T,i − p,i − q,i . T0 Using the divergence theorem and the boundary conditions we find that Z ½ hA w, wiX = vis (tsji,j + pbsi ) + νis (msji,j + εijk tsjk + m b si )+ Ω f f + vi (tji,j
+ pbfi − p,i − q,i ) + νif (mfji,j + εijk tfjk + m b fi )+ ¶ ¸ ·µ K ζ s vi,i + 2 T,ii + +T −β0 + T0 T ¾ 0 + E[(vs , ν s ), (us , ϕs )] dv = Z = − Φ[(vs , ν s , vf , ν f , T ), (vs , ν s , vf , ν f , T )]dv.
(29)
Ω
Thus, by using the assumption (7) we obtain the relation (27) and the proof is complete. ¤ Lemma 3.2. The operator A satisfies the range condition Range(I − A) = X.
(30)
Proof. Assume that w∗ = (u∗s , v∗s , ϕ∗s , ν ∗s , v∗f , ν ∗f , T ∗ ) ∈ X. We must show that the equation w − Aw = w∗ ,
(31)
January 8, 2007
18:38
148
WSPC - Proceedings Trim Size: 9in x 6in
icaade
I.-D. Ghiba
has a solution in D(A). From the definition of the operator A we obtain the system ∗s s s2 ∗s usi − As1 i w = ui , vi − Ai w = vi , ∗s s s4 ∗s ϕsi − As3 i w = ϕi , νi − Ai w = νi ,
vif − Afi 1 w = vi∗f , νif − Afi 2 w = νi∗f ,
(32)
T − ATi w = T ∗ . By eliminating the functions vis and ϕsi , we obtain for the determination of the functions usi , ϕsi , vif , νif and T the following system · 1 s1 s Li y = ui − s (λs + µs )usj,ij + (µs + k s )usi,jj + k s εijk ϕsk,j − ρ0 ¶ ¸ µ ζ f s + β0 T,i = gi∗s1 , − ξ(ui − vi ) − T0 1 s s s s s s s s s Ls2 i y = ϕi − s s [(α + β )ϕj,ij + γ ϕi,jj + k (εijk uk,j − 2ϕi )− ρ0 j −$(ϕsi − νif )] = gi∗s2 , · 1 f1 f s s + k f εijk νk,j + Li y = vi − f − p,i − q,i + (µf + k f )vi,jj ρ0 ¸ ζ + ξ(usi − vif ) + T,i = gi∗f 1 , T0 1 f f2 f f f s Li y = νi − f [(α + β f )νj,ij + γ f νi,jj + k f (εijk vk,j − 2νif )+ ρ0 j f
(33)
+ $(ϕsi − νif )] = gi∗f 2 , ·µ ¶ ¸ ζ K T02 s T − β0 + u + T,ii = g ∗T , L y =T− C0 T0 i,i T02 where y = (us , ϕs , vf , ν f , T ), p ∈ H 1 (Ω) with ∆p = 0, q ∈ H01 (Ω) and ξ ∗s u , ρs0 i $ , = νi∗s + s s ϕ∗s ρ0 j i
gi∗s1 = vi∗s + gi∗s2
ξ ∗s ui , ρf0 $ = νi∗f − f ϕ∗s i , ρ0 j f µ ¶ ζ T2 u∗s . = T ∗ − 0 − β0 + C0 T0 i
gi∗f 1 = vi∗s − gi∗f 2 g ∗T
(34)
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Existence and Uniqueness in the Micropolar Mixture Theory
149
We study this system in the following Hilbert space Z = (H10 (Ω) ∩ H2 (Ω)) ×(H10 (Ω) ∩ H2 (Ω))×V(Ω)× ×(H10 (Ω) ∩ H2 (Ω))×(H01 (Ω) ∩ H 2 (Ω)). We introduce the bilinear form B : Z × Z → R ¿ e ) = ( Ls1 y, Ls2 y, Lf 1 y, Lf 2 y, LT y), B(y, y ¶À µ C0 e s , ρf0 v e f , ρf0 j f ν e f , 2 Te e s , ρs0 j s ϕ = ρs0 u T0 L2 ×L2 ×L2 ×L2 ×L2 Z ½ C0 = ρs0 usi u esi + ρs0 j s ϕsi ϕ esi + ρf0 vif veif + ρf0 j f νif νeif + 2 T Te+ T0
(35)
(36)
Ω
e s, u ef , ϕ e f , Te)]+ + Φ[(us , ϕs , uf , ϕf , T ), (e us , ϕ ¾ fs )] dv, +E[(us , ϕs ), (e us , ϕ e = (e e s, v ef , ν e f , Te) and the linear operator l : Z → R where y us , ϕ ¿ l(e y) = (g∗s1 , g∗s2 , g∗f 1 , g∗f 2 , g ∗T ), ¶À µ f f f C0 e s es s s e s f ef e , 2T = ρ 0 u , ρ 0 j ϕ , ρ0 v , ρ 0 j ν T0 2 2 2 2 2 ¶ µ L ×L ×L ×L¶ ×L Z ½ µ $ ξ veis + ρs0 j s νi∗s + s s ϕ∗s ϕ esi + = ρs0 vi∗s + s u∗s i ρ0 ρ0 j i Ω ! Ã µ ¶ $ ∗s ξ ∗s f f f ∗f f ∗f vei + ρ0 j νi − s s ϕi νeif + +ρ0 vi − f ui ρ0 j ρ0 · µ ¶ ¸ ¾ 2 T ζ C0 u∗i Te dv. + 2 T ∗ − 0 −β0 + T0 C0 T0
(37)
Using the relations (7), (14), (19) and the Schwarz inequality we see that B is bounded, that is e ) ≤ M1 kykZ ke B(y, y ykZ , M1 = positive constant
(38)
B(y, y) ≥ M2 kyk2Z , M2 = positive constant
(39)
and coercive
and the linear operator l is bounded l(e y) ≤ M3 ke ykZ , M3 = positive constant.
(40)
January 8, 2007
18:38
150
WSPC - Proceedings Trim Size: 9in x 6in
icaade
I.-D. Ghiba
The Lax-Milgram theorem proves the existence of solution of system (33) in Z and, as a consequence, we have the solution of system (32). The proof is complete. ¤ Theorem 3.1. The operator A defined by the relation (14) generates a C0 contractive semigroup in X. Proof. The proof follows using the previous lemmas and the LumerPhillips corollary to Hille-Yosida theorem (see Ref. 10). ¤ Theorem 3.2. Assume that fis , lis , fif , lif , h ∈ C 1 ([0, t1 ); L2 (Ω)) and w0 ∈ D(A). Then, there exists a unique solution w ∈ C1 ((0, t1 ); X) ∩ C0 ([0, t1 ); D(A)) of the boundary value problem (16). Proof. The proof result from the results concerning the abstract Cauchy problem (see Refs. 10,11). ¤ Corollary 3.1. If w ∈ C1 ((0, t1 ); X) ∩ C 0 ([0, t1 ); D(A)) is the solution of boundary value problem (16) then exist π f = p + q with p ∈ H01 (Ω), ∆p = 0, q ∈ H 1 (Ω) so that · ¸ 1 dvif ζ f f f f f f s = f (µ + k )vi,jj + k εijk νk,j + ξ(vi − vi ) + T,i − dt T0 ρ0 (41) 1 f − f π,i + fif . ρ0 Proof. We obtain the conclusion of this corollary using the relation (10) and the definition of Leray Projector. ¤ Corollary 3.2. In the hypothesis of the Theorem 3.2 we have the following estimate Zt ¡ s kw(t)kX ≤ kw0 (t)kX + M4 kf (τ )kL2 (Ω) + kls (τ )kL2 (Ω) + (42) 0 ¢ + kP (f f (τ ))kL2 (Ω) + klf (τ )kL2 (Ω) + kh(τ )kL2 (Ω) dτ, where M4 = positive constant. Proof. For the proof of this Corollary we use the fact that the semigroup generated by A is contractive. ¤ 4. Concluding Comments The main purpose of this paper was to study the existence, uniqueness and continuous dependence of solution for the approach developed by Erin-
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
Existence and Uniqueness in the Micropolar Mixture Theory
151
gen1 for describing the behaviour of a binary homogeneous mixture of an isotropic micropolar elastic solid with an incompressible micropolar viscous fluid. The mechanical interpretation of condition (7) and (14) is obvious. The assumptions (7) results by the entropy inequality and the assumption (14), usual in the study of well posed problems, are in agreement with the restrictions imposed in Ref. 9 for the study of the uniqueness and continuous dependence of solution. The present results show that the general approach of a binary homogeneous mixture of an isotropic micropolar elastic solid with an incompressible micropolar viscous fluid is well posed. The uniqueness result is in concordance with that obtained for a Newtonian fluid (see Ref. 14). Acknowledgments The author acknowledges support from the Romanian Ministry of Education and Research through CEEX program, contract CERES-2-Cex06-1112/25.07.2006. References 1. A.C. Eringen, Micropolar mixture theory of porous media, Journal of Applied Physics, 94 (2003), 4184–4190. 2. A.C. Eringen, Microcontinuum Field Theories. Foundations and Solids, (Springer, New York, 1999). 3. A.C. Eringen, Microcontinuum Field Theories, II, Fluent Media, (Springer, New York, 2001). 4. R.M. Bowen, Theory of Mixtures, Continuum Physics, III, edited by A.C. Eringen, (Academic Press, New York, 1976). 5. C. Gale¸s, Some uniqueness and continuous dependence results in the theory of swelling porous elastic soils, Int. J. Eng. Sci., 40 (2002), 1211–1231. 6. C. Gale¸s, Existence and uniqueness results in the theory of swelling porous elastic soils, An. St. Univ. Ia¸si, Sect. Matematica, 49 (2003), 161–174. 7. S. Chirit¸a ˘, On the uniqueness and continuous data dependence of solutions in the theory of swelling porous thermoelastic soils, Int. J. Eng. Sci., 41 (2003), 2363–2380. 8. F. Mart´ınes, R. Quintanilla, Some qualitative results for the linear theory of binary mixtures of thermoelastic solids, Collect. Math., 46 (1995), 263–277. 9. I.D. Ghiba, Some uniqueness and continuous dependence results in the micropolar mixture theory of porous media, Int. J. Eng. Sci., 44 (2006), 1269–1279. 10. A. Pazy, Semigroups of Linear Operators and Applications to Partial Differential Equations, (Springer Verlag, New York, Berlin, Heidelberg, Tokyo, 1983).
January 8, 2007
18:38
152
WSPC - Proceedings Trim Size: 9in x 6in
icaade
I.-D. Ghiba
11. I. Vrabie, Semigrupuri de operatori liniari ¸si aplicat¸ii, (Ed. Univ. ”Al. I. Cuza”, Ia¸si, 2001). 12. R. Temam, Navier-Stokes Equations. Theory and Numerical Analysis. With an appendix by F. Thomasset. 3rd edition. Studies in Mathematics and its Aplications, 2 (North-Holland Publishing Co., Amsterdam, 1984). 13. R.A. Adams, Sobolev Space, (Academic Press, New York, 1975). 14. M.E. Gurtin, An Introduction to Continuum Mechanics, (Academic Press. Inc., San Diego-New York-Berkeley-Boston-London-Sydney-Tokyo-Toronto, 1981).
January 8, 2007
18:38
WSPC - Proceedings Trim Size: 9in x 6in
icaade
153
APPROXIMATE CONTROLLABILITY FOR LINEAR STOCHASTIC DIFFERENTIAL EQUATIONS WITH CONTROL ACTING ON THE NOISE DAN GOREAC Laboratoire de Math´ ematiques, Unit´ e CNRS UMR 6285, Universit´ e de Bretagne Occidentale, 6, av. Victor LeGorgeu, B.P. 809, 29200 Brest cedex, France E-mail:
[email protected] In this paper we study approximate controllability for a linear stochastic differential equation dy(t) = (Ay(t) + Bu(t)) dt + (Cy(t) + Du(t)) dW (t), for the case when the control acts also on the noise. This may be considered as a generalization of the work of Buckdahn, Quincampoix and Tessitore where the problem is solved for D = 0 and of Peng for D of full rank. We prove, using the dual BSDE and Riccati methods that approximate controllability is equivalent to the local in time viability for a suitable set. Finally, an invariance criterion is given. Keywords: Stochastic control; Controllability; Controllability under constraints; Backward stochastic differential equation; Riccati equation.
1. Introduction Given a complete probability space (Ω, F, P ) and a standard Brownian motion (W (t), t ≥ 0) on this space, we consider the natural complete filtration (Ft )t≥0 generated by W. We let A = A(Ω, F, P ; W ) be the set of all (Ft )progressively measurable processes v(·) taking their values in Rd and such hR i T that E 0 |v(s)|2 ds < ∞ for all T > 0. A process v(·) ∈ A will be referred as an admissible control process. We consider the following linear stochastic differential equation dy(t) = (Ay(t) + Bu(t)) dt + (Cy(t) + Du(t)) dW (t), 0 ≤ t ≤ T, n
(1)
n
governed by the control process u(·) ∈ A, where A, C ∈ L(R , R ), and B, D ∈ L(Rd , Rn ). The initial condition is y(0) = x ∈ Rn .
(2)
January 8, 2007
18:38
154
WSPC - Proceedings Trim Size: 9in x 6in
icaade
D. Goreac
For all x ∈ Rn and all admissible control u(·), the equation (1) admits a unique predictable solution y(·, x, u) with continuous trajectories such that y(0, x, u) = x. Furthermore, this solution satisfies, for all T > 0, " # E
sup |y(s)|2 < ∞. s∈[0,T ]
In Refs. 1 and 2, Peng (respectively Liu and Peng) have studied the ”exact controllability” and ”exact terminal controllability” for (1). They show that exact terminal controllability is equivalent with the condition that D has full rank. Moreover, algebraic conditions of Kalman type give a characterization of exact controllability. The case where the control u(·) does not act on the noise (i.e. D = 0 ) has been studied by Buckdahn, Quincampoix and Tessitore in Ref. 3. Since D is not of full rank, exact terminal controllability must be weakened to ”approximate controllability”. Algebraic Riccati equation methods are used in Ref. 3 in order to obtain a characterization of approximately-controllable stochastic linear equations. This criterion says that, in order to have approximate controllability, the only locally in time viable subset of a certain linear space has to be the trivial set. The objective of our paper is to extend the results in Refs. 3 and 1 to the general case where the control is allowed to act on the noise (i.e. rank(D) ≥ 0) without necessarily having D of full rank. We give a characterization of approximate controllability using the notion of local in time viability of a linear space V ⊂ Rn conditioned to another linear space U ⊂ Rn