18th EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING
COMPUTER-AIDED CHEMICAL ENGINEERING Advisory Editor: R. Gani Volume 1: Volume 2: Volume 3: Volume 4: Volume 5:
Volume 6: Volume 7: Volume 8: Volume 9: Volume 10: Volume 11: Volume 12: Volume 13: Volume 14: Volume 15: Volume 16: Volume 17: Volume 18: Volume 19: Volume 20: Volume 21:
Volume 22: Volume 23: Volume 24: Volume 25:
Distillation Design in Practice (L.M. Rose) The Art of Chemical Process Design (G.L. Wells and L.M. Rose) Computer Programming Examples for Chemical Engineers (G. Ross) Analysis and Synthesis of Chemical Process Systems (K. Hartmann and K. Kaplick) Studies in Computer-Aided Modelling. Design and Operation Part A: Unite Operations (I. Pallai and Z. Fonyó, Editors) Part B: Systems (I. Pallai and G.E. Veress, Editors) Neural Networks for Chemical Engineers (A.B. Bulsari, Editor) Material and Energy Balancing in the Process Industries - From Microscopic Balances to Large Plants (V.V. Veverka and F. Madron) European Symposium on Computer Aided Process Engineering-10 (S. Pierucci, Editor) European Symposium on Computer Aided Process Engineering-11 (R. Gani and S.B. Jørgensen, Editors) European Symposium on Computer Aided Process Engineering-12 (J. Grievink and J. van Schijndel, Editors) Software Architectures and Tools for Computer Aided Process Engineering (B. Braunschweig and R. Gani, Editors) Computer Aided Molecular Design: Theory and Practice (L.E.K. Achenie, R. Gani and V. Venkatasubramanian, Editors) Integrated Design and Simulation of Chemical Processes (A.C. Dimian) European Symposium on Computer Aided Process Engineering-13 (A. Kraslawski and I. Turunen, Editors) Process Systems Engineering 2003 (Bingzhen Chen and A.W. Westerberg, Editors) Dynamic Model Development: Methods, Theory and Applications (S.P. Asprey and S. Macchietto, Editors) The Integration of Process Design and Control (P. Seferlis and M.C. Georgiadis, Editors) European Symposium on Computer-Aided Process Engineering-14 (A. Barbosa-Póvoa and H. Matos, Editors) Computer Aided Property Estimation for Process and Product Design (M. Kontogeorgis and R. Gani, Editors) European Symposium on Computer-Aided Process Engineering-15 (L. Puigjaner and A. Espuña, Editors) 16th European Symposium on Computer Aided Process Engineering and 9th International Symposium on Process Systems Engineering (W. Marquardt and C. Pantelides) Multiscale Modelling of Polymer Properties (M. Laso and E.A. Perpète) Chemical Product Design: Towards a Perspective through Case Studies (K.M. Ng, R. Gani and K. Dam-Johansen, Editors) 17th European Symposium on Computer Aided Process Engineering (V. Plesu and P.S. Agachi, Editors) 18th European Symposium on Computer Aided Process Engineering (B. Braunschweig and X. Joulia, Editors)
COMPUTER-AIDED CHEMICAL ENGINEERING, 25
18th EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING Edited by
Bertrand Braunschweig IFP, France
and
Xavier Joulia LGC - ENSIACET - IPT, France
Amsterdam – Boston – Heidelberg – London – New York – Oxford Paris – San Diego – San Francisco – Singapore – Sydney – Tokyo
Elsevier Radarweg 29, PO Box 211, 1000 AE Amsterdam, The Netherlands Linacre House, Jordan Hill, Oxford OX2 8DP, UK First edition 2008 Copyright © 2008 Elsevier B.V. All rights reserved No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, mechanical, photocopying, recording or otherwise without the prior written permission of the publisher Permissions may be sought directly from Elsevier’s Science & Technology Rights Department in Oxford, UK: phone (+44) (0) 1865 843830; fax (+44) (0) 1865 853333; email:
[email protected]. Alternatively you can submit your request online by visiting the Elsevier web site at http://elsevier.com/locate/permissions, and selecting Obtaining permission to use Elsevier material Notice No responsibility is assumed by the publisher for any injury and/or damage to persons or property as a matter of products liability, negligence or otherwise, or from any use or operation of any methods, products, instructions or ideas contained in the material herein. Because of rapid advances in the medical sciences, in particular, independent verification of diagnoses and drug dosages should be made Library of Congress Cataloging-in-Publication Data A catalog record for this book is available from the Library of Congress British Library Cataloguing in Publication Data A catalogue record for this book is available from the British Library ISBN (volume): 978-0-444-53227-5 ISBN (CD): 978-0-444-53228-2 ISSN: 1570-7946 For information on all Elsevier publications visit our website at books.elsevier.com
Printed and bound in The Netherlands 08 09 10 11
10 9 8 7 6 5 4 3 2 1
v
Contents
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxi International Scientific Committee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xxiii National Organising Committee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxvi
Plenary Lectures Model Parameterization Tailored to Real-Time Optimization Benoît Chachuat, Bala Srinivasan and Dominique Bonvin. . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Challenges for Multi-Scale Modeling of Multiple Failure Modes in Microelectronics Juergen Auersperg, Bernhard Wunderle, Rainer Dudek, Hans Walter and Bernd Michel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Design and Integration of Policies to Achieve Environmental Targets René Bañares-Alcántara. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Computational Chemical Engineering Modeling Applied to Energy and Reactor Design Luc Nougier. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Curricular and Pedagogical Challenges for Enhanced Graduate Attributes in CAPE Ian T. Cameron and Daniel R. Lewin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Topic 1 – Off-Line Systems Keynote Lectures Chemical Product Engineering: The 3rd Paradigm Michael Hill.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Simulation in Nuclear Engineering Design Christian Latgé. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Oral Communications Supply Chain Risk Management Through HAZOP and Dynamic Simulation Arief Adhitya, Rajagopalan Srinivasan and I.A. Karimi.. . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 A New Approach for the Design of Multicomponent Water/Wastewater Networks Débora C. Faria and Miguel J. Bagajewicz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Effect of Catalytic Reactor Design on Plantwide Control Strategy: Application to VAM Plant Costin S. Bildea and Alexandre C. Dimian . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
vi
Contents
Model of the Product Properties for Process Synthesis Peter M.M. Bongers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Performance Analysis and Optimization of Enantioselective Fractional Extraction with a Multistage Equilibrium Model André B. de Haan, Norbert J.M. Kuipers and Maartje Steensma. . . . . . . . . . . . . . . . . . . . . .61 Synthesis of Cryogenic Energy Systems Frank Del Nogal, Jin-Kuk Kim, Simon Perry and Robin Smith . . . . . . . . . . . . . . . . . . . . . . . 67 Study of a Novel Heat Integrated Hybrid Pervaporation Distillation Process: Simulation and Experiments M.T. Del Pozo Gómez, P. Ruiz Carreira, J.-U. Repke, A. Klein, T. Brinkmann and G. Wozny. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 A Novel Network-Based Continuous-time Formulation for Process Scheduling Diego M. Giménez, Gabriela P. Henning and Christos T. Maravelias. . . . . . . . . . . . . . . . . . 79 Excipient Interaction Prediction: Application of the Purdue Ontology for Pharmaceutical Engineering (POPE) Leaelaf Hailemariam, Pradeep Suresh, Venkata Pavan Kumar Akkisetty, Girish Joglekar, Shuo-Huan Hsu, Ankur Jain, Kenneth Morris, Gintaras Reklaitis, Prabir Basu and Venkat Venkatasubramanian. . . . . . . . . . . . . . . . . . . . 85 Optimal Column Sequencing for Multicomponent Mixtures Andreas Harwardt, Sven Kossack and Wolfgang Marquardt. . . . . . . . . . . . . . . . . . . . . . . . . 91 Systematic Design of Production Processes for Enantiomers with Integration of Chromatography and Racemisation Reactions Malte Kaspereit, Javier García Palacios, Tania Meixús Fernández and Achim Kienle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 The Application of a Task-Based Concept for the Design of Innovative Industrial Crystallizers Richard Lakerveld, Herman J.M. Kramer, Peter J. Jansens and Johan Grievink. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 Cell Cycle Modelling for Off-line Dynamic Optimisation of Mammalian Cultures Carolyn M. Lam, Kansuporn Sriyudthsak, Cleo Kontoravdi, Krunal Kothari, Hee-Ho Park, Efstratios N. Pistikopoulos and Athanasios Mantalaris. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 New Configuration for Hetero-Azeotropic Batch Distillation: I. Feasibility Studies Peter Lang, Ferenc Denes and Xavier Joulia. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 Integrated Design of Solvent-Based Extractive Separation Processes P. Lek-utaiwan, B. Suphanit, N. Mongkolsiri and R. Gani. . . . . . . . . . . . . . . . . . . . . . . . . . 121 Development of a Novel Petri Net Tool for Process Design Selection Based on Inherent Safety Assessment Method Fakhteh Moradi and Parisa A. Bahri.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Contents
vii
Population Balance Modeling of Influenza Virus Replication in MDCK Cells During Vaccine Production Thomas Müller, Josef Schulze-Horsel, Yury Sidorenko, Udo Reichl and Achim Kienle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 A Population Balance Model Approach for Crystallization Product Engineering via Distribution Shaping Control Zoltan K. Nagy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 Uncertainty Patterns and Sensitivity Analysis of an Indicator Based Process Design Framework Stavros Papadokonstantakis, Agarwal Siddharta, Hirokazu Sugiyama and Konrad Hungerbühler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 Batch Scheduling with Intermediate Due Dates Using Timed Automata Models Subanatarajan Subbiah, Thomas Tometzki and Sebastian Engell. . . . . . . . . . . . . . . . . . . . 151 A Decomposition Approach to Short-Term Scheduling of Multi-Purpose Batch Processes Norbert Trautmann, Rafael Fink, Hanno Sagebiel and Christoph Schwindt . . . . . . . . . . . 157
Posters Combined Nitrogen and Phosphorus Removal. Model-Based Process Optimization Noelia Alasino, Miguel C. Mussati, Nicolás Scenna and Pío Aguirre. . . . . . . . . . . . . . . . . 163 A Systematic Procedure for Optimizing Crude Oil Distillation Systems Hasan Y. Alhammadi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 Evaluation of Pervaporation Process for Recovering a Key Orange Juice Flavour Compound: Modeling and Simulation W.A. Araujo, M.E.T. Alvarez, E.B. Moraes and M.R. Wolf-Maciel . . . . . . . . . . . . . . . . . . . 175 A Microeconomics-Based Approach to Product Design Under Uncertainty Craig Whitnack, Ashley Heller and Miguel J. Bagajewicz. . . . . . . . . . . . . . . . . . . . . . . . . . 181 Model Predictive Control Based Planning in the Fruit Industry Aníbal Blanco, Guillermo Masini, Noemi Petracci and Alberto Bandoni . . . . . . . . . . . . . . 187 Optimize Process Condensate Reusing System for Ammonia Plant by the Synthesis of MEN Li Chen, Jian Du, Zhihui Gao, Pingjing Yao and Warren D. Seider. . . . . . . . . . . . . . . . . . 193 Entrainer-Based Reactive Distillation versus Conventional Reactive Distillation for the Synthesis of Fatty Acid Esters M.C. de Jong, A.C. Dimian and A.B. de Haan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199 Supply Chain Optimization with Homogenous Product Transport Constraints Tivadar Farkas, Zoltán Valentinyi, Endre Rév and Zoltán Lelkes. . . . . . . . . . . . . . . . . . . . 205 A Sensitivity Analysis on Optimal Solutions Obtained for a Reactive Distillation Column Rui M. Filipe, Steinar Hauan, Henrique A. Matos and Augusto Q. Novais . . . . . . . . . . . . 211
viii
Contents
Synthesis of Zero Effluent Multipurpose Batch Processes Using Effective Scheduling Jacques F. Gouws and Thokozani Majozi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217 Design of a Syngas Infrastructure Paulien M. Herder, Rob M. Stikkelman, Gerard P.J. Dijkema and Aad F. Correljé. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223 Implementation of a Reactive Dividing Wall Distillation Column in a Pilot Plant Rodrigo Sandoval-Vergara, Fabricio Omar Barroso-Muñoz, Héctor Hernández-Escoto, Juan Gabriel Segovia-Hernández, Salvador Hernández and Vicente Rico-Ramírez . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229 Optimisation of a Bio-ethanol Purification Process Using Conceptual Design and Simulation Tools Patricia M. Hoch and José Espinosa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235 Improvement of Operating Procedures through the Reconfiguration of a Plant Structure Satoshi Hoshino, Hiroya Seki, Tomoya Sugimoto and Yuji Naka. . . . . . . . . . . . . . . . . . . . . 241 Graph-Theoretic Approach to Optimal Synthesis of Supply Networks: Distribution of Gasoline from a Refinery Young Kim, L.T. Fan, Choamun Yun, Seung Bin Park, Sunwon Park, Botond Bertok and Ferenc Friedler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247 Optimal Design and Operation of Multivessel Batch Distillation Column with Fixed Product Demand and Strict Product Specifications Mohamed T. Mahmud, Iqbal M. Mujtaba and Mansour Emtir. . . . . . . . . . . . . . . . . . . . . . . 253 An Integrated Framework for Operational Scheduling of a Real-World Pipeline Network Suelen Neves Boschetto, Luiz Carlos Felizari, Lia Yamamoto, Leandro Magatão, Sérgio Leandro Stebel, Flávio Neves-Jr, Lúcia Valéria Ramos de Arruda, Ricardo Lüders, Paulo César Ribas and Luiz Fernando de Jesus Bernardo . . . . . . . . . . . . 259 An Optimization Framework of Multibed Pressure Swing Adsorption Systems Dragan Nikolic, Michael C. Georgiadis and Eustathios S. Kikkinides . . . . . . . . . . . . . . . . 265 Multi-Objective Design of Multipurpose Batch Facilities Using Economic Assessments Tânia Rute Pinto, Ana Paula F.D. Barbósa-Póvoa and Augusto Q. Novais . . . . . . . . . . . . 271 Oil Products Pipeline Scheduling with Tank Farm Inventory Management Susana Relvas, Henrique A. Matos, Ana Paula F.D. Barbosa-Póvoa and João Fialho. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277 Methodology of Conceptual Process Synthesis for Process Intensification Ben-Guang Rong, Eero Kolehmainen and Ilkka Turunen . . . . . . . . . . . . . . . . . . . . . . . . . . 283 Process Plant Knowledge Based Simulation and Design Jelenka B. Savkovic-Stevanovic, Snezana B. Krstic, Milan V. Milivojevic and Mihailo B. Perunicic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289
Contents
ix
Study of Arrangements for Distillation of Quaternary Mixtures Using Less Than N-1 Columns Dulce María Méndez-Valencia, María Vázquez-Ojeda, Juan Gabriel Segovia-Hernández, Héctor Hernández and Adrián Bonilla-Petriciolet. . . . . . . . . . . . . . . 295 A Hybrid Meta-Heuristic Method for Logistics Optimization Associated with Production Planning Yoshiaki Shimizu, Yoshihiro Yamazaki and Takeshi Wada . . . . . . . . . . . . . . . . . . . . . . . . . 301 Model-Based Investment Planning Model for Stepwise Capacity Expansions of Chemical Plants Andreas Wiesner, Martin Schlegel, Jan Oldenburg, Lynn Würth, Ralf Hannemann and Axel Polt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 307 Divided Wall Distillation Column: Dynamic Modeling and Control Alexandru Woinaroschy and Raluca Isopescu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313
Topic 2 – On-Line Systems Oral Communications Optimization of Preventive Maintenance Scheduling in Processing Plants DuyQuang Nguyen and Miguel Bagajewicz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319 Predictive Optimal Management Method for the Control of Polygeneration Systems Andrés Collazos and François Maréchal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325 Comparison of Model Predictive Control Strategies for the Simulated Moving Bed Adrian Dietz and Jean-Pierre Corriou . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331 Model Reduction Techniques for Dynamic Optimization of Chemical Plants Operation Bogdan Dorneanu, Costin Sorin Bildea and Johan Grievink . . . . . . . . . . . . . . . . . . . . . . . 337 A Mathematical Programming Framework for Optimal Model Selection/Validation of Process Data Belmiro P. Duarte, Maria J. Moura, Filipe J.M. Neves and Nuno M.C. Oliveira. . . . . . . . 343 Towards On-line Model-Based Design of Experiments Federico Galvanin, Massimiliano Barolo and Fabrizio Bezzo . . . . . . . . . . . . . . . . . . . . . . 349 Sensor Placement for Fault Detection and Localization Carine Gerkens and Georges Heyen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 355 Using Kriging Models for Real-Time Process Optimisation Marcos V.C. Gomes, I. David L. Bogle, Evaristo C. Biscaia Jr. and Darci Odloak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361 Estimation of a Class of Stirred Tank Bioreactors with Discrete-Delayed Measurements Héctor Hernández-Escoto, Ricardo Aguilar-López, María Isabel Neria-González and Alma Rosa Domínguez-Bocanegra . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 367
x
Contents
Optimal Control of Batch Processes Using Particle Swam Optimisation with Stacked Neural Network Models Fernando Herrera and Jie Zhang . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 375 Online LQG Stabilization of Unstable Gas-Lifted Oil Wells Esmaeel Jahanshahi, Karim Salahshoor and Riyaz Kharrat . . . . . . . . . . . . . . . . . . . . . . . . 381 Analysis of the Constraint Characteristics of a Sheet Forming Control Problem Using Interval Operability Concepts Fernando V. Lima, Christos Georgakis, Julie F. Smith and Phillip D. Schnelle . . . . . . . . . 387 Real-Time Optimization via Adaptation and Control of the Constraints Alejandro Marchetti, Benoît Chachuat and Dominique Bonvin . . . . . . . . . . . . . . . . . . . . . . 393 Integration of Engineering Process Control and Statistical Control in Pulp and Paper Industry Ana S. Matos, José G. Requeijo and Zulema L. Pereira . . . . . . . . . . . . . . . . . . . . . . . . . . . . 399 A Combined Balanced Truncation and Multi-Parametric Programming Approach for Linear Model Predictive Control Diogo Narciso and Efstratios Pistikopoulos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 405 Fault Detection and Isolation Based on the Model-Based Approach: Application on Chemical Processes Nelly Olivier-Maget, Gilles Hétreux, Jean-Marc Le Lann and Marie-Véronique Le Lann . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 411 Computer Aided Operation of Pipeless Plants Sabine Piana and Sebastian Engell. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 417 Off-line Design of PAT Systems for On-line Applications Ravendra Singh, Krist V. Gernaey and Rafiqul Gani . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 423
Posters New Method for Sensor Network Design and Upgrade for Optimal Process Monitoring Miguel J. Bagajewicz, DuyQuang Nguyen and Sanjay Kumar Sugumar . . . . . . . . . . . . . . . 429 A Novel Proactive-Reactive Scheduling Approach in Chemical Multiproduct Batch Plants Elisabet Capón, Georgios M. Kopanos, Anna Bonfill, Antonio Espuña and Luis Puigjaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 435 Model Predictive Control of the Waste Water Treatment Plant Based on the Benchmark Simulation Model No.1-BSM1 Vasile-Mircea Cristea, Cristian Pop and Paul Serban Agachi. . . . . . . . . . . . . . . . . . . . . . . 441 Load Balancing Control System of a Furnace from Atmospheric Distillation Unit Cristian Patrascioiu and Sanda Mihalache . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 447 Optimal Operation of Sublimation Time of the Freeze Drying Process by Predictive Control: Application of the MPC@CB Software N. Daraoui, P. Dufour, H. Hammouri and A. Hottot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 453
Contents
xi
Improving Steady-State Identification Galo A.C. Le Roux, Bruno Faccini Santoro, Francisco F. Sotelo, Mathieu Teissier and Xavier Joulia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 459 Application of Adaptive Neurofuzzy Control Using Soft Sensors to Continuous Distillation Javier Fernandez de Canete, Pablo del Saz-Orozco and Salvador Gonzalez-Perez . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 465 Correlation-Based Just-In-Time Modeling for Soft-Sensor Design Koichi Fujiwara, Manabu Kano and Shinji Hasebe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 471 Integrating Strategic, Tactical and Operational Supply Chain Decision Levels in a Model Predictive Control Framework José Miguel Laínez, Georgios M. Kopanos, Mariana Badell, Antonio Espuña and Luis Puigjaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 477 Hybrid Strategy for Real Time Optimization with Feasibility Driven for a Large Scale Three-Phase Catalytic Slurry Reactor Delba N.C. Melo, Adriano P. Mariano, Eduardo C. Vasco de Toledo, Caliane B.B. Costa and Rubens Maciel Filho . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 483 Adaptive Control of the Simultaneous Saccharification – Fermentation Process from Starch to Ethanol Silvia Ochoa, Velislava Lyubenova, Jens-Uwe Repke, Maya Ignatova and Günter Wozny . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 489 Advanced Control Monitoring in Petrobras’ Refineries: Quantifying Economic Gains on a Real-Time Basis Rafael Pinotti, Antonio Carlos Zanin and Lincoln Fernando Lautenschlager Moro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 495 Comparative Analysis of Robust Estimators on Nonlinear Dynamic Data Reconciliation Diego Martinez Prata, José Carlos Pinto and Enrique Luis Lima . . . . . . . . . . . . . . . . . . . 501 State Estimation for Dynamic Prediction of Hydrate Formation in Oil and Gas Production Systems J. Rodriguez Perez, C.S. Adjiman and C.D. Immanuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 507 RCS for Process Control: Is There Anything New Under the Sun? Manuel Rodríguez and Ricardo Sanz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 513 Data Treatment and Analysis for On-line Dynamic Process Optimization Nina Paula G. Salau, Giovani Tonel, Jorge O. Trierweiler and Argimiro R. Secchi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 519 Nonlinear Model Predictive Control of a Swelling Constrained Industrial Batch Reactor Levente L. Simon, Z.K. Nagy and Konrad Hungerbühler . . . . . . . . . . . . . . . . . . . . . . . . . . 525 An Adapted SLAB Model Using Sensor Data for the Prediction on the Dispersion of Hazardous Gas Releases Won So, Dongil Shin and En Sup Yoon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 531
xii
Contents
Topic 3 – Computational & Numerical Solutions Strategies Keynote Lecture Expanding Process Modelling Capability through Software Interoperability Standards: Application, Extension and Maintenance of CAPE OPEN Standards Ray Dickinson . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 537
Oral Communications Optimization of WWTP Control by Means of Multi-Objective Genetic Algorithms and Sensitivity Analysis Benoit Beraud, Jean-Philippe Steyer, Cyrille Lemoine and Eric Latrille. . . . . . . . . . . . . . . 539 A Model Reduction-Based Optimisation Framework for Large-Scale Simulators Using Iterative Solvers Ioannis Bonis and Constantinos Theodoropoulos. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 545 Rigorous Flowsheet Optimization Using Process Simulators and Surrogate Models José A. Caballero and Ignacio E. Grossmann . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 551 MILP-Based Decomposition Method for the Optimal Scheduling of an Industrial Batch Plant Pedro M. Castro, Augusto Q. Novais and Alexandre Carvalho . . . . . . . . . . . . . . . . . . . . . . 557 Design of Constrained Nonlinear Model Predictive Control Based on Global Optimisation Michal C ižniar, Miroslav Fikar and M.A. Latifi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 563 Biclustering of Data Matrices in Systems Biology via Optimal Re-ordering Peter A. DiMaggio Jr., Scott R. McAllister, Christodoulos A. Floudas, Xiao-Jiang Feng, Joshua D. Rabinowitz and Herschel A. Rabitz. . . . . . . . . . . . . . . . . . . . . 569 Optimum Experimental Design for Key Performance Indicators Stefan Körkel, Harvey Arellano-Garcia, Jan Schöneberger and Günter Wozny . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 575 Inductive Data Mining: Automatic Generation of Decision Trees from Data for QSAR Modelling and Process Historical Data Analysis Chao Y. Ma, Frances V. Buontempo and Xue Z. Wang . . . . . . . . . . . . . . . . . . . . . . . . . . . . 581 The Solution of Very Large Non-Linear Algebraic Systems Davide Manca and Guido Buzzi-Ferraris. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 587 Multi-Operations Time-Slots Model for Crude-Oil Operations Scheduling Sylvain Mouret, Ignacio E. Grossmann and Pierre Pestiaux . . . . . . . . . . . . . . . . . . . . . . . . 593 A Framework for Analysis of Computational Load of CAPE Tools Pablo A. Rolandi and Alejandro Cano . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 599 An Implementation of Parallel Computing for Hierarchical Logistic Network Design Optimization Using PSO Yoshiaki Shimizu and Hiroshi Kawamoto . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605
Contents
xiii
Service-Oriented CAPE: A New Direction for Software Applications Iain D. Stalker, Eric S. Fraga, Aidong Yang and Nikolay D. Mehandjiev . . . . . . . . . . . . . 611 Using Grid Computing to Solve Hard Planning and Scheduling Problems Michael C. Ferris, Christos T. Maravelias and Arul Sundaramoorthy . . . . . . . . . . . . . . . . 617 Benchmarking Numerical and Agent-Based Models of an Oil Refinery Supply Chain Koen H. van Dam, Arief Adhitya, Rajagopalan Srinivasan and Zofia Lukszo . . . . . . . . . . 623 Large-Scale Nonlinear Programming Strategies for the Operation of LDPE Tubular Reactors Victor M. Zavala and Lorenz T. Biegler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 629
Posters Simulis® Thermodynamics: An Open Framework for Users and Developers Olivier Baudouin, Stéphane Dechelotte, Philippe Guittard and Alain Vacher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 635 A New Approach for Chemical Transfer Reaction Models Zakia Benjelloun-Dabaghi, Renaud Cadours, Sylvie Cauvin and Pascal Mougin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 641 Modeling and Simulation of the Particle Size Distribution for Emulsion Polymerization in a Tubular Reactor Ala Eldin Bouaswaig, Wolfgang Mauntz and Sebastian Engell . . . . . . . . . . . . . . . . . . . . . 647 Composite Zeolite Membranes Characterization by using a Transient State Experimental Technique and a Parameter Estimation Procedure Lucile Courthial, Arnaud Baudot, Mélaz Tayakout-Fayolle and Christian Jallut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 653 MPC@CB Software: A Solution for Model Predictive Control Bruno da Silva, Pascal Dufour, Nida Othman and Sami Othman . . . . . . . . . . . . . . . . . . . . 659 Detection of Multiple Structural Changes in Linear Processes Through Change Point Analysis and Bootstrapping Belmiro P.M. Duarte and P.M. Saraiva. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 665 Applications of Grey Programming to Process Design Edelmira D. Gálvez, Luis A. Cisternas, Pamela S. Patiño and Kathy L. Ossandon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 671 Flexible and Configurable MILP-Models for Meltshop Scheduling Optimization Iiro Harjunkoski and Guido Sand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 677 Functional Data Analysis for the Development of a Calibration Model for Near-infrared Data Cheng Jiang and Elaine B. Martin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 683 Application of Global Sensitivity Analysis to Biological Models Alexandros Kiparissides, Maria Rodriguez-Fernandez, Sergei Kucherenko, Athanasios Mantalaris and Efstratios Pistikopoulos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 689
xiv
Contents
Development of a Sophisticated Framework for Complex Single- and Multi-Objective Optimization Tasks Matthias Leipold, Sven Gruetzmann, Georg Fieg, Dietrich Maschmeyer, Jörg Sauer and Holger Wiederhold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 695 Towards Resilient Supply Chains: Uncertainty Analysis Using Fuzzy Mathematical Programming Kishalay Mitra, Ravindra D. Gudi, Sachin C. Patwardhan and Gautam Sardar. . . . . . . . . 701 Modeling and Identification of the Bio-ethanol Production Process from Starch: Cybernetic vs. Unstructured Modeling Silvia Ochoa, Ahrim Yoo, Jens-Uwe Repke, Günter Wozny and Dae Ryook Yang. . . . . . . . 707 Particle Swarm Optimisation in Heat Exchanger Network Synthesis Including Detailed Equipment Design Aline P. Silva, Mauro A.S.S. Ravagnani and Evaristo C. Biscaia Jr. . . . . . . . . . . . . . . . . . 713 A Single Stage Approach for Designing Water Networks with Multiple Contaminants Krzysztof Walczyk and Jacek Jezowski . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 719
Topic 4 – Integrated and Multiscale Modelling and Simulation Keynote Lecture Multiscale Molecular Modeling: A Tool for the Design of Nano Structured Materials Maurizio Fermeglia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 725
Oral Communications Energy-Preserving Method for Spatial Discretization: Application to an Adsorption Column Ahmed Baaiu, Françoise Couenne, Laurent Lefevre and Yann Le Gorrec . . . . . . . . . . . . . 727 MEXA goes CAMD – Computer-Aided Molecular Design for Physical Property Model Building André Bardow, Sven Kossack, Ernesto Kriesten and Wolfgang Marquardt. . . . . . . . . . . . . 733 Modeling the Phase Equilibria of Nitriles by the soft-SAFT Equation of State Abdelkrim Belkadi, Mohamed K. Hadj-Kali, Vincent Gerbaud, Xavier Joulia, Fèlix Llovell and Lourdes F. Vega . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 739 Application of a Digital Packing Algorithm to Cylindrical Pellet-Packed Beds Richard Caulkin, Michael Fairweather, Xiaodong Jia, Abid Ahmad and Richard A. Williams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 745 Modelling and Simulation of a Membrane Microreactor Using Computational Fluid Dynamics Paris Chasanis, Eugeny Y. Kenig, Volker Hessel and Stefan Schmitt . . . . . . . . . . . . . . . . . 751 Modeling of Catalytic Hydrogen Generation from Sodium Borohydride André Gonçalves, Pedro Castro, Augusto Q. Novais, Carmen M. Rangel and Henrique Matos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 757
Contents
xv
Towards a New Generation Heat Exchanger Models Geert W. Haarlemmer and Jérôme Pigourier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 763 Brownian Dynamics and Kinetic Monte Carlo Simulation in Emulsion Polymerization Hugo F. Hernandez and Klaus Tauer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 769 Biodiesel Production by Heat-Integrated Reactive Distillation Anton A. Kiss, Alexandre C. Dimian and Gadi Rothenberg . . . . . . . . . . . . . . . . . . . . . . . . 775 Modeling Comparison of High Temperature Fuel Cell Performance: Electrochemical Behaviours of SOFC and PCFC Jean-Marie Klein and Jonathan Deseure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 781 An Integrated Framework for Model-Based Flow Assurance in Deep-Water Oil and Gas Production Eduardo Luna-Ortiz, Praveen Lawrence, Constantinos C. Pantelides, Claire S. Adjiman and Charles D. Immanuel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 787 Enhanced Modeling and Integrated Simulation of Gasification and Purification Gas Units Targeted to Clean Power Production Mar Pérez-Fortes, Aarón Bojarski, Sergio Ferrer-Nadal, Georgios M. Kopanos, José Ma Nougués, Enric Velo and Luis Puigjaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 793 Absorption of Aromatic Hydrocarbons in Multicomponent Mixtures: A Comparison Between Simulations and Measurements in a Pilot Plant Diethmar Richter, Holger Thielert and Günter Wozny . . . . . . . . . . . . . . . . . . . . . . . . . . . . 799 A Comprehensive Population Balance Model of Emulsion Polymerisation for PSD & MWD: Comparison to Experimental Data S.J. Sweetman, C.D. Immanuel, T.I. Malik, S. Emmett and N. Williams . . . . . . . . . . . . . . . 805 Prediction of Partition Coefficients Between Food Simulants and Packaging Materials Using Molecular Simulation and a Generalized Flory-Huggins Approach Olivier Vitrac and Guillaume Gillet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 811 Shape – The Final Frontier Xue Z. Wang, Caiyun Ma and Kevin J. Roberts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 817
Posters Computational Fluid Dynamics: A Tool to the Formulation of Therapeutic Aerosols Nathalie Bardin-Monnier, Véronique Falk and Laurent Marchal-Heussler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 823 Large Eddy Simulation of Particle Dispersion in a Straight, Square Duct Flow Michael Fairweather and Jun Yao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 829 Test Bench Dimensioned by Specific Numerical Tool Nicolas Gascoin, Philippe Gillard, Gregory Abraham and Marc Bouchez . . . . . . . . . . . . 835 Optimization of SOFC Interconnect Design Using Multiphysic Computation Dominique Grondin, Jonathan Deseure, Mohsine Zahid, Maria José Garcia and Yann Bultel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 841
xvi
Contents
Multi-Objective Scheduling for Environmentally-Friendly Batch Operations Iskandar Halim and Rajagopalan Srinivasan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 847 Operability Analysis and Conception of Microreactor by Integration of Reverse Engineering and Rapid Manufacturing André L. Jardini, Maria Carolina B. Costa, Aulus R.R. Bineli, Andresa F. Romão and Rubens Maciel Filho . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 853 Optimisations with Energy Recovery for Oxidative Desulphurization of Heavy Gas Oil Hamza A. Khalfalla, Iqbal M. Mujtaba, Mohamed M. El-Garni and Hadi A. El-Akrami . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 859 Ion-Specific Potential of Mean Force Between Two Aqueous Proteins Eduardo R.A. Lima, Frederico W. Tavares and Evaristo C. Biscaia Jr. . . . . . . . . . . . . . . . 865 A Heteronuclear Group Contribution Method for Associating Chain Molecules (SAFT-γ) Alexandros Lymperiadis, Claire S. Adjiman, Amparo Galindo and George Jackson . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 871 An Analytical-Numerical Method for Solving a Heap Leaching Problem of one or more Solid Reactants from Porous Pellets Mario E. Mellado and Luis A. Cisternas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 877 Thermochemical Multi-phase Models Applying the Constrained Gibbs Energy Method Risto Pajarre, Peter Blomberg and Pertti Koukkari . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 883 Industrial Applications of Multi-Phase Thermochemical Simulation Risto Pajarre, Pertti Koukkari and Karri Penttilä . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 889 Prediction of the Melting Point Temperature Using a Linear QSPR for Homologous Series Inga Paster, Mordechai Shacham and Neima Brauner . . . . . . . . . . . . . . . . . . . . . . . . . . . . 895 A General Mathematical Model for a Moving Bed Gasifier Sauro Pierucci and Eliseo Ranzi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 901 Modelling of an Hybrid Wastewater Treatment Plant Marie-Noëlle Pons, Maria do Carmo Lourenço da Silva, Olivier Potier, Eric Arnos and Philippe Battaglia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 907 Dimension Reduction of Two-Dimensional Population Balances Based on the Quadrature Method of Moments Andreas Voigt, Wolfram Heineken, Dietrich Flockerzi and Kai Sundmacher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 913 Predictions of the Consequences of Natural Gas-Hydrogen Explosions Using a Novel CFD Approach Robert M. Woolley, Michael Fairweather, Samuel A.E.G. Falle and Jack R. Giddings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 919
Contents
xvii
Topic 5 – Cape for the Users! Oral Communications Support of Strategic Business Decisions at BASF’s Largest Integrated Production Site Based on Site-Wide Verbund Simulation Stefan Brüggemann, Nanette Bauer, Eberhard Fuchs, Axel Polt, Bernhard Wagner and Michael Wulkow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 925 A Generic Scientific Information Management System for Process Engineering Sylvie Cauvin, Mireille Barbieux, Laurent Carrié and Benoît Celse. . . . . . . . . . . . . . . . . . 931 Rapid Process Design and Development of Complex Solution Copolymers Yadunandan L. Dar and Tahir I. Malik . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 937 Troubleshooting and Process Optimisation by Integrating CAPE Tools and Six Sigma Methodology Dr. Guido Dünnebier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 943 A Compliance Management System for the Pharmaceutical Industry Julie Fisher, Arantza Aldea and René Bañares-Alcántara . . . . . . . . . . . . . . . . . . . . . . . . . 949 Business Process Model for Knowledge Management in Plant Maintenance Tetsuo Fuchino, Yukiyasu Shimada, Masazumi Miyazawa and Yuji Naka . . . . . . . . . . . . . 955 Practical Challenges in Developing Data-Driven Soft Sensors for Quality Prediction Jun Liu, Rajagopalan Srinivasan and P.N. SelvaGuru . . . . . . . . . . . . . . . . . . . . . . . . . . . . 961 Process Analytical Technologies (PAT) – The Impact for Process Systems Engineering Zeng Ping Chen, David Lovett and Julian Morris . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 967 Decision Support for Control Structure Selection During Plant Design Jan Oldenburg, Hans-Jürgen Pallasch, Colman Carroll, Veit Hagenmeyer, Sachin Arora, Knud Jacobsen, Joachim Birk, Axel Polt and Peter van den Abeel . . . . . . . 973 Production-Line Wide Dynamic Bayesian Network Model for Quality Management in Papermaking Aino Ropponen and Risto Ritala . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 979 OntoMODEL: Ontological Mathematical Modeling Knowledge Management Pradeep Suresh, Girish Joglekar, Shuohuan Hsu, Pavan Akkisetty, Leaelaf Hailemariam, Ankur Jain, Gintaras Reklaitis and Venkat Venkatasubramanian . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 985 OntoCAPE 2.0 – a (Re-)Usable Ontology for Computer-Aided Process Engineering Jan Morbach, Andreas Wiesner and Wolfgang Marquardt . . . . . . . . . . . . . . . . . . . . . . . . 991
Posters CAPE Methods and Tools for Systematic Analysis of New Chemical Product Design and Development Merlin Alvarado-Morales, Naweed Al-Haque, Krist V. Gernaey, John M. Woodley and Rafiqul Gani . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 997
xviii
Contents
Hazop Support System and its Use for Operation Koji Kwamura, Yuji Naka, Tetsuo Fuchino, Atsushi Aoyama and Nobuo Takagi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1003 Acceleration of the Retrieval of Past Experiences in Case Based Reasoning: Application for Preliminary Design in Chemical Engineering Stephane Negny and Jean-Marc Le Lann . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1009 Visual Exploration of Multi-State Operations Using Self-Organizing Map Yew Seng Ng and Rajagopalan Srinivasan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1015 Multi-Criteria Decision Making in Product-driven Process Synthesis Kristel de Ridder, Cristhian Almeida-Rivera, Peter Bongers, Solke Bruin and Simme Douwe Flapper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1021 Improvement of the Production Process of Leached Optical Fibers in a Technological and Organizational Context Daniëlle T. Stekelenburg, Zofia Lukszo and Jeff Lowe . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1027 Quality Assurance of Simulation Results Laurent Testard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1033 Decision Tree Based Qualitative Analysis of Operating Regimes in Industrial Production Processes Tamás Varga, Ferenc Szeifert, József Réti and János Abonyi . . . . . . . . . . . . . . . . . . . . . . 1039 Mobatec Modeller – A Flexible and Transparent Tool for Building Dynamic Process Models Mathieu R. Westerweele and Jan Laurens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1045
Topic 6 – Cape and Society Keynote Lecture Sustainable Energy Futures, and what we can do about it Cav. Prof. Sandro Macchietto . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1051
Oral Communications A Methodology for Designing and Evaluating Biomass Utilization Networks Nasser Ayoub, Hiroya Seki and Yuji Naka . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1053 Integrated Gasification Combined Cycle (IGCC) Process Simulation and Optimization F. Emun, M. Gadalla and L. Jiménez . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1059 IDEF0 Activity Modeling for Integrated Process Design Considering Environmental, Health and Safety (EHS) Aspects Masahiko Hirao, Hirokazu Sugiyama, Ulrich Fischer and Konrad Hungerbühler . . . . . . 1065 A Prototype Agent-Based Modeling Approach for Energy System Analysis Bri-Mathias Hodge, Selen Aydogan-Cremaschi, Gary Blau, Joseph Pekny and Gintaras Reklaitis. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1071
Contents
xix
A Systematic Framework for Biorefinery Production Optimization Norman E. Sammons, Jr., Wei Yuan, Mario R. Eden, Burak Aksoy and Harry T. Cullinan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1077 Economic Analysis and Process Integration of Hydrogen Production Strategies Wei Yuan, Norman E. Sammons Jr., Kristin H. McGlocklin and Mario R. Eden . . . . . . . 1083 Design of Heat-integrated Power Systems with Decarbonisation Xuesong Zheng, Jin-Kuk Kim and Robin Smith . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1089
Posters Mathematical Modeling of Limestone Dissolution in Batch Stirred Tank Reactors in Presence of a Diluted Strong Acid Cataldo De Blasio, Jarl Ahlbeck and Frej Bjondahl . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1095 Biodiesel Production from Vegetable Oils: Operational Strategies for Large Scale Systems Nívea de Lima da Silva, Elmer Ccopa Rivera, César Benedito Batistella, Danilo Ribeiro de Lima, Rubens Maciel Filho and Maria Regina Wolf Maciel . . . . . . . . 1101 Minimization of Life Cycle Greenhouse Emissions and Cost in the Operation of Steam and Power Plants Pablo E. Martinez and Ana Maria Eliceche . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1107 Developing a Lake Eutrophication Model and Determining Biogeochemical Parameters: A Large Scale Parameter Estimation Problem Vanina Estrada, Elisa R. Parodi and M. Soledad Diaz . . . . . . . . . . . . . . . . . . . . . . . . . . . 1113 Computer Aided Design of Occupationally Healthier Processes Mimi H. Hassim and Markku Hurme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1119 Energy Management in a Stand-Alone Power System for the Production of Electrical Energy with Long Term Hydrogen Storage Dimitris Ipsakis, Spyros Voutetakis, Panos Seferlis, Fotis Stergiopoulos, Simira Papadopoulou, Costas Elmasides and Chrysovalantis Keivanidis . . . . . . . . . . . . 1125 Mapping Environmental Issues within Supply Chains: A LCA Based Approach José Miguel Laínez, Aarón Bojarski, Antonio Espuña and Luis Puigjaner . . . . . . . . . . . 1131 Exergy Analysis of Biological Hydrogen Production Ala Modarresi, Walter Wukovits and Anton Friedl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1137 Sensitivity Analysis of a Model for Atmospheric Dispersion of Toxic Gases Nishant Pandya, Eric Marsden, Pascal Floquet and Nadine Gabas. . . . . . . . . . . . . . . . . 1143 A Generic Framework for Modeling, Design and Optimization of Industrial Phosphoric Acid Production Processes Athanasios I. Papadopoulos and Panos Seferlis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1149 Fisher Information: A Generalized Sustainability Index? Vicente Rico-Ramirez, Pedro A. Quintana-Hernandez, Jesus A. Ortiz-Cruz and Salvador Hernandez-Castro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1155 Towards Improved Cleaning of FMCG Plants: A Model-Based Approach A. Yang, E.B. Martin, G.A. Montague and P.J. Fryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1161
xx
Contents
Topic 7 – Cape in Education Oral Communications Development of Sustainable Energy Systems: A New Challenge for Process Systems Engineering Education Catherine Azzaro-Pantel, Christophe Gourdon, Xavier Joulia, Jean-Marc Le Lann, Stéphan Astier, Guillaume Fontes, Maria David and Alain Ayache. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1167 Enhancing the Understanding and Insights of Students and Industry Operators in Process Engineering Principles via Immersive 3D Environments Christine Norton, Ian Cameron, Caroline Crosthwaite, Nicoleta Balliu, Moses Tade, David Shallcross, Andrew Hoadley, Geoff Barton and John Kavanagh. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1175 CAPE Tools in Biotechnology: Why, When, What, Who, Which Ones and Where? L. Jiménez, I. Katakis, A. Fabregat, T. Schafer, S. Rodriguez, J.M. Mateo, M. Giamberini, B. Rivera, P. Argüeso, E. Calero, L. Vico, F. Hernandez, R. Genc, M. Medir, J.R. Alabart and G. Guillén-Gosálbez . . . . . . . . . . . . . . . . . . . . . . . . 1181 What is “In” and What is “Out” in Engineering Problem Solving Mordechai Shacham, Michael B. Cutlip and Neima Brauner . . . . . . . . . . . . . . . . . . . . . . 1187
Poster Virtual and Remote Laboratory for Robotics E-Learning Carlos A. Jara, Francisco A. Candelas and Fernando Torres . . . . . . . . . . . . . . . . . . . . . 1193 Author Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1199
xxi
Preface This book contains papers presented at the 18th European Symposium on Computer Aided Process Engineering, ESCAPE-18, held in Lyon, France, June 1–4, 2008. A complementary CD-Rom contains all the papers presented at the symposium. ESCAPE-18 is the 40th event of the CAPE (Computer Aided Process Engineering) Working Party of the European Federation of Chemical Engineering (EFCE). The ESCAPE series started in 1992 at Elsinore, Denmark, on a strong foundation of 23 events of the CAPE WP. The first event was organized in Tutzing, Germany, in 1968. The most recent symposia were organized in Barcelona, Spain, 2005, Garmisch-Partenkirchen, Germany, 2006 and Bucharest, Romania, 2007. The ESCAPE series brings the latest innovations and achievements by leading professionals from the industrial and academic communities. The series serves as a forum for engineers, scientists, researchers, managers and students from academia and industry to: – present new computer aided methods, algorithms, techniques related to process and product engineering, – discuss innovative concepts, new challenges, needs and trends in the area of CAPE. This research area bridges fundamental sciences (physics, chemistry, thermodynamics, applied mathematics and computer sciences) with the various aspects of process and product engineering. The main theme for ESCAPE-18 is CAPE for the Users! CAPE systems are to be put in the hands of end users who need functionality and assistance beyond the scientific and technological capacities which are at the core of the systems. User-friendliness, on-line or web-based advice, decision support, knowledge management, organisational issues, are important points that must be taken care of when deploying a CAPE system. These issues were addressed in a special session and industrial case studies illustrating CAPE methods and tools were encouraged. The other four main topics cover the usual scope of ESCAPE series: – – – –
off-line systems for synthesis and design, on-line systems for control and operation, computational and numerical solutions strategies, integrated and multi-scale modelling and simulation,
and two general topics address the impact of CAPE tools and methods on Society and Education. More than 580 abstracts were submitted to the conference. Out of them 420 were invited to submit a full paper and 342 were finally selected for oral or poster presentation. Their authors came from 41 different countries. The review of abstracts, review of manuscripts and final selection
xxii
Preface
of revised manuscripts were carried out by an International Scientific Committee (ISC). We are very grateful to the 84 members of the ISC for their efficient and fruitful collaboration. In addition to the accepted papers, eleven outstanding speakers were invited for giving plenary or keynote lectures on state-of-the art, challenges and future needs in all main topics. ESCAPE celebrates its 18th anniversary this year, reaching the adult stage! It is true that ESCAPE is quite an established conference in the realm of computer-aided process engineering, but it continues to attract innovative young researchers from around the world. We are confident that it will go on as such in the forthcoming year, keeping the young spirit together with the experience acquired over its first eighteen years. We hope that this book will serve as a valuable reference document to the scientific and industrial community and will contribute to the progress in computer aided process and product engineering.
Bertrand Braunschweig Xavier Joulia ESCAPE-18 Co-Chairmen
xxiii
International Scientific Committee
Conference Co-Chairpersons Bertrand Braunschweig, IFP, France Xavier Joulia, LGC – ENSIACET – INPT, France
Topic Area Co-Chairpersons Off-line Systems Rafiqul Gani, Technical University of Denmark, Denmark Jan van Schijndel, Shell Global Solutions International, The Netherlands
On-line Systems Chonghun Han, Seoul National University, South Korea Martin Wolf, Bayer Technology Services, Germany
Computational and Numerical Solution Strategies Lorens Biegler, Carnegie-Mellon University, USA Michel Pons, Michel Pons Technologie, France
Integrated and Multiscale Modelling and Simulation Luis Puigjaner, Universitat Politècnica de Catalunya, Spain Costas Pantelides, Process Systems Enterprise, UK
CAPE for the Users! Tahir I. Malik, ICI Strategic Technology Group, UK Wolfgang Marquardt, RWTH Aachen University, Germany
CAPE and Society Peter Glavic, University of Maribor, Slovenia Sophie Jullian, IFP, France
CAPE in Education Ian Cameron, University of Queensland, Australia Georges Heyen, University of Liège, Belgium
Members Off-line Systems Ana Barbosa-Póvoa, Instituto Superior Tecnico, Portugal David Bogle, University College London, UK Michael Doherty, University of California, USA
xxiv
International Scientific Committee Andrzej Gorak, University of Dortmund, Germany Johan Grievink, Delft University of Technology, The Netherlands Ignacio Grossmann, Carnegie Mellon University, USA Ludovit Jelemensky, Slovak University of Technology, Slovakia Zdravko Kravanja, University of Maribor, Slovenia Christian Latgé, CEA, France Henrique Matos, Instituto Superior Tecnico, Portugal Xuan Meyer, LGC – ENSIACET – INPT, France Ka Ming Ng, Hongkong University of Science and Technology, China (Hongkong) Sauro Pierucci, Politecnico di Milano, Italy Heinz Preisig, Norwegian University of Science and Technology, Norway Eva Sorensen, University College London, UK Petr Srehlik, BRNO University of Technology, Czech Republic
On-line Systems Dominique Bonvin, Ecole Polytechnique Fédérale de Lausanne, Switzerland Didier Caudron, Sanofi Pasteur, France Yann Creff, IFP, France Sebastian Engell, University of Dortmund, Germany Antonio Espuña, Universitat Politècnica de Catalunya, Spain Sten Bay Jorgensen, Technical University of Denmark, Denmark Marie-Véronique Le Lann, LAAS, France Iqbal Mujtaba, University of Bradford, UK Jose Pinto, Universidade de São Paulo, Brazil Sigurd Skogestad, Norwegian University of Science and Technology, Norway Venkat Venkatasubramanian, Purdue University, USA Günter Wozny, Technical University of Berlin, Germany Toshko Zhelev, University of Limerick, Ireland
Computational and Numerical Solution Strategies Guido Buzzi-Ferraris, Politecnico di Milano, Italy Benoit Chachuat, Ecole Polytechnique Fédérale de Lausanne, Switzerland Pascal Floquet, LGC – ENSIACET – INPT, France Christodoulos Floudas, Princeton University, USA Jacek Jezowski, Rzeszow Technical University, Poland François Maréchal, Ecole Polytechnique Fédérale de Lausanne, Switzerland Hervé Pingaud, ENSTIMAC, France Stratos Pistikopoulos, Imperial College London, UK Mordechai Shacham, Ben-Gurion University of the Negev, Israel Alain Vacher, ProSim, France Peter Verheijen, Delft University of Technology, The Netherlands
Integrated and Multiscale Modelling and Simulation Claire Adjiman, Imperial College London, UK Ana Maria Eliceche, Plapiqui, Argentina Christian Jallut, LAGEP – Université Lyon 1 – CPE, France Thokozani Majozi, University of Pretoria, South Africa Fernando Martins, FEUP, Portugal Natalia Menshutina, D.I. Mendeleev University of Chemical Technology, Russia
International Scientific Committee Gintaras Reklaitis, Purdue University, USA George Stephanopoulos, MIT, USA Jan Thullie, Politechnika Slaska, Poland Gilles Trystram, GénIAl – ENSIA, France
CAPE for the Users! Rafael Batres, Toyohashi University of Technology, Japan Sylvie Cauvin, IFP, France Gabriella Henning, INTEC, Argentina Andrzej Kraslawski, Lappeenranta University of Technology, Finland Jean-Marc Le Lann, LGC – ENSIACET – INPT, France Jack Ponton, University of Edinburgh, UK Rajagopalan Srinivasan, National University of Singapore, Singapore Lars Von Wedel, AixCAPE, Germany
CAPE and Society Arsène Isambert, LGPM-ECP, France Emilia Kondili, TEI of Piraeus, Greece Sandro Macchietto, Imperial College London, UK Peter Mizsey, Budapest University of Technology and Economics, Hungary Yuji Naka, Tokyo Institute of Technology, Japan Claudio Oller do Nascimento, Universidade de São Paulo, Brazil Valentin Plesu, University Politehnica of Bucharest, Romania En Sup Yoon, Seoul National University, Korea
CAPE in Education David Bogle, University College London, UK Marie Debacq, CNAM, France Urban Gren, Chalmers University of Technology, Sweden Daniel Lewin, Technion, Israel
xxv
xxvi
National Organising Committee
Chairman Bertrand Braunschweig, IFP
Members Didier Caudron, Sanofi Pasteur Stéphane Déchelotte, ProSim Pascal Floquet, LGC – ENSIACET – INPT Arsène Isambert, LGPM – ECP Christian Jallut, LAGEP – Université Lyon 1 – CPE Xavier Joulia, LGC – ENSIACET – INPT Christian Latgé, CEA Frédérique Léandri, IFP Francis Luck, Total Francis Nativel, Axens Hervé Roustan, Alcan Philippe Vacher, RSI
Symposium Secretariat ESCAPE 18 c/o COLLOQUIUM 12 rue de la Croix-Faubin 75011 Paris – France
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
1
Model Parameterization Tailored to Real-time Optimization Benoît Chachuat,a Bala Srinivasan,b Dominique Bonvina a
Laboratoire d’Automatique, Ecole Polytechnique Fédérale de Lausanne (EPFL), Station 9, CH-1015 Lausanne, Switzerland b Département de Génie Chimique, Ecole Polytechnique de Montréal, C.P. 6079 Succ. centre ville, Montréal (QC), H3C 3A7, Canada
Abstract Challenges in real-time process optimization mainly arise from the inability to build and adapt accurate models for complex physico-chemical processes. This paper surveys different ways of using measurements to compensate for model uncertainty in the context of process optimization. A distinction is made between model-adaptation methods that use the measurements to update the parameters of the process model before repeating the optimization, modifier-adaptation methods that adapt constraint and gradient modifiers, and direct-input-adaptation methods that convert the optimization problem into a feedback control problem. This paper argues in favor of modifier-adaptation methods, since it uses a model parameterization, measurements, and an update criterion that are tailored to the tracking of the necessary conditions of optimality. Keywords: Measurement-based optimization; Real-time optimization; Plant-model mismatch; Model adaptation; Model parameterization.
1. Introduction Optimization of process performance has received attention recently because, in the face of growing competition, it represents the natural choice for reducing production costs, improving product quality, and meeting safety requirements and environmental regulations. Process optimization is typically based on a process model, which is used by a numerical procedure for computing the optimal solution. In practical situations, however, an accurate process model can rarely be found with affordable effort. Uncertainty results primarily from trying to fit a model of limited complexity to a complex process. The model-fitting task is further complicated by the fact that process data are usually noisy and signals do not carry sufficient excitation. Therefore, optimization using an inaccurate model might result in suboptimal operation or, worse, infeasible operation when constraints are present [8]. Two main classes of optimization methods are available for handling uncertainty. The essential difference relates to whether or not measurements are used in the calculation of the optimal strategy. In the absence of measurements, a robust optimization approach is typically used, whereby conservatism is introduced to guarantee feasibility for the entire range of expected variations [18]. When measurements are available, adaptive optimization can help adjust to process changes and disturbances, thereby reducing conservatism [9]. It is interesting to note that the above classification is similar to that found in control problems with the robust and adaptive techniques. An optimal solution has to be feasible and, of course, optimal. In practice, feasibility is often of greater importance than optimality. In the presence of model uncertainty,
2
B. Chachuat et al.
feasibility is usually enforced by the introduction of backoffs from the constraints. The availability of measurements helps reduce these backoffs and thus improve performance [6]. Generally, it is easier to measure or infer constrained quantities (e.g. temperature or pressure) than estimate gradients of the cost and constrained quantities. These elements clearly set a priority of actions in the framework of adaptive optimization. This paper discusses three major approaches in adaptive optimization that differ in the way adaptation is performed, namely (i) model-adaptation methods, where the measurements are used to refine the process model, and the updated model is used subsequently for optimization [7,17]; (ii) modifier-adaptation methods, where modifier terms are added to the cost and constraints of the optimization problem, and measurements are used to update these terms [8,10,20]; and (iii) direct-input-adaptation methods, where the inputs are adjusted by feedback controllers, hence not requiring optimization but a considerable amount of prior information regarding control design [9,21,25]. These approaches are surveyed and compared in the first part of the paper. A critical discussion follows, which argues in favor of modifier-adaptation methods that share many advantages of the other methods. An important issue not addressed herein concerns the availability of reliable measurements. Also, note that the intended purpose of the models presented here is optimization and not prediction of the system behavior.
2. Static Optimization Problems For continuous processes operating at steady state, optimization typically consists in determining the operating point that minimize or maximize some performance of the process (such as minimization of operating cost or maximization of production rate), while satisfying a number of constraints (such as bounds on process variables or product specifications). In mathematical terms, this optimization problem can be stated as follows:
( ) ( ) := g ( , y ) 0
minimize: p ( ) := p , y p
subject to: G p where n and y p respectively; n
ny
ny ny
gp :
(1)
p
stand for the process input (set points) and output vectors,
p : n ng
p
is
the
plant
performance
index;
and
is the vector of constraints imposed on the input and output
variables. In contrast to continuous processes, the optimization of batch and semi-batch processes consists in determining time-varying control profiles, u(t), t 0 t t f . This typically involves solving a dynamic optimization problem, possibly with path and terminal constraints. A practical way of solving such problems is by parameterizing the control profiles using a finite number of parameters , e.g., a polynomial approximation of u(t) on finite elements. Although the process is dynamic in nature, a static map can be used to describe the relationship between the process inputs and the outcome of the batch y(t f ) . Hence, the problem can be regarded as a finite-dimensional static optimization problem similar to (1), and the optimization approaches discussed in the following sections can also be used in the framework of run-to-run optimization of
Model Parameterization Tailored to Real-Time Optimization
3
batch and semi-batch processes (see, e.g., [9]). In practice, the mapping relating the process inputs and outputs is typically unknown, and only an approximate model is available,
y = f ( , ) with y
ny
(2)
representing the model outputs, and n the model parameters, and n
f : n n y the input-output mapping. Accordingly, an approximate solution of problem (1) is obtained by solving the following model-based optimization problem:
minimize: ( , ) := ( , y, )
subject to: y = f ( , )
(3)
G ( , ) := g ( , y, ) 0
Provided that the objective and constraint functions in (1) and (3) are continuous and the feasible domains of these problems are nonempty and bounded, optimal solution points p and are guaranteed to exist for (1) and (3), respectively [2]. Note that such optimal points may not be unique due to nonconvexity. The KKT conditions – also called necessary conditions of optimality (NCO) – must hold at an optimal solution point provided that the active constraints satisfy a regularity condition at that point [2]. For Problem (3), the KKT conditions read:
(
)
G , 0, 0 ,
(
)
(
)
G , + , = 0, G , = 0
(
(4)
)
n
where g is the vector of Lagrange multipliers. The KKT conditions involve the G , which are denoted collectively by subsequently. quantities G, and
3. A Classification of Real-time Optimization Schemes Real-time optimization (RTO) schemes improve process performance by adjusting selected optimization variables using available measurements. The goal of this closedloop adaptation is to drive the operating point towards the true plant optimum in spite of inevitable structural and parameter model errors. RTO methods can be classified in different ways. This section presents one such classification based on the parameters that can be adapted, as illustrated in Fig. 1; note that repeated numerical optimization is used in the methods of columns 1 and 2, but not in those of column 3. 3.1. Model-Adaptation Methods The standard way of devising a RTO scheme is the so-called two-step approach [1], also referred to as repeated identification and optimization in the literature. In the first step, the values of (a subset of) the adjustable model parameters are estimated by using the available process measurements. This is typically done by minimizing the lack of closure in the steady-state model equations (2), such as the weighted sum of squared errors between measured outputs y p and predicted outputs y [17].
4
B. Chachuat et al.
Figure 1: Optimization scenarios that use measurements to adapt for feasibility and optimality.
A key, yet difficult, decision in the model-update step is to select the parameters to be updated. These parameters should be identifiable, represent actual changes in the process, and contribute to approach the process optimum; also, model adequacy proves to be a useful criterion to select candidate parameters for adaptation [8]. Clearly, the smaller the subset of parameters, the better the confidence in the parameter estimates, and the lower the required excitation. But too low a number of adjustable parameters can lead to completely erroneous models, and thereby to a false optimum. In the second step, the updated model is used to determine a new operating point, by solving an optimization problem similar to (3). Model-adaptation methods can be written generically using the following two equations (see Fig. 2):
(
)
k = k1 + upd y p ( k1 ) y( k1 , k1 ) ,
(5)
= opt (
(6)
k
k
)
where upd is the map describing the model-update step, such that upd (0) = 0 ; opt , the map describing the optimization step. Note that the handles for correction are a subset of the adjustable model parameters . The use of auxiliary measurements ( y p ) presents the advantage that any available measurement can be used.
Figure 2. Model-adaptation method: Two-step approach
5
Model Parameterization Tailored to Real-Time Optimization
It is well known that the interaction between the model-update and reoptimization steps must be considered carefully for the two-step approach to achieve optimal performance. In the absence of plant-model mismatch and when the parameters are structurally and practically identifiable, convergence to the plant optimum may be achieved in one iteration. However, in the presence of plant-model mismatch, whether the scheme converges, or to which operating point the scheme converges, becomes anybody's guess. This is due to the fact that the update objective might be unrelated to the cost or constraints in the optimization problem, and minimizing the mean-square error in y may not help in our quest for feasibility and optimality. To alleviate this difficulty, Srinivasan and Bonvin [23] presented an approach where the criterion in the update problem is modified to account for the subsequent optimization objective. Convergence under plant-model mismatch has been addressed by several authors [3,8]; it has been shown that an optimal operating point is reached if model adaptation leads to a matching of the KKT conditions for the model and the plant. Theorem 1. Let the parameter adaptation (5) be such that the plant measurements p match those predicted by the model, . Then, upon convergence, the model-adaptation scheme (5-6) reaches an (local) optimum operating point of the plant. A proof of this result is readily obtained from the assumption that the KKT conditions predicted by the model equal those achieved by the plant. With such a matching, the converged solution corresponds to a (local) plant optimum. Although Theorem 1 is straightforward, the KKT-matching assumption is difficult to meet in practice. It requires an “adequate” parameterization so that all the components of the KKT conditions can match, as well as “adequate” measurements and an “adequate” update criterion. 3.2. Modifier-Adaptation Methods In order to overcome the modeling deficiencies and to handle plant-model mismatch, several variants of the two-step approach have been presented in the literature. Generically, they consist in modifying for the cost and constraints of the optimization problem for the KKT conditions of the model and the plant to match. The optimization problem with modifiers can be written as follows: ( , ) := ( , ) + T minimize: ( , ) := G ( , ) + G + GT k 0 subject to: G
(
where G
ng
)
(7)
is the constraint bias, n the cost-gradient modifier, and
n n
G g the constraint-gradient modifier; these modifiers are denoted collectively by subsequently. • The constraint bias G represents the difference between the measured and predicted constraints, G := G p ( ) G( , ) , evaluated at the previous operating point k . Adapting only G leads to the so-called constraint-adaptation scheme [6,8]. Such a scheme is rather straightforward and corresponds to common industrial practice [17]. • The cost-gradient modifier represents the difference between the estimated and predicted values of the cost gradient, T := p , evaluated at the previous
6
B. Chachuat et al.
operating point k . The pertinent idea of adding a gradient modifier to the cost function of the optimization problem dates back to the work of Roberts [19] in the late 1970s. Note that it was originally proposed in the framework of two-step methods to better integrate the model update and optimization subproblems and has led to the so-called ISOPE approach [4]. • The constraint-gradient modifier G , finally, represents the difference between the estimated and predicted values of the constraint gradients, T := G p G , G
evaluated at the previous operating point k . The idea of adding such a first-order modifier term to the process-dependent constraints, in addition to the constraint bias G , was proposed recently by Gao and Engell [12]. This modification allows matching, not only the values of the constraints, but also their gradients. Overall, the update laws in modifier-adaptation methods can be written as (see Fig. 3):
(
k1 , ) k = k1 + upd p ( k1 ) (
= opt ( k
k
)
)
(8) (9)
:= G, G where , , with , G as defined in Problem (7); and the modifier update map, upd , is such that upd (0) = 0 . The handles for correction are the modifier parameters instead of used in the context of model-adaptation schemes. Also, the measurements p required to make the adaptation are directly related to the KKT conditions; auxiliary measurements are not used in this framework. Observe the one-toone correspondence between the number of measurements/estimates and the number of adjustable parameters. In particular, identifiability is automatically satisfied, and so are the KKT-matching conditions.
Figure 3. Modifier-adaptation method: Matching the KKT conditions
Modifier-adaptation methods possess nice theoretical properties, as summarized by the following theorem. Theorem 2. Let the cost and constraint functions be parameterized as in Problem (7). Also, let the information on the values of p be available and used to adapt the modifiers . Then, upon convergence, the modifier-adaptation scheme (8-9) reaches an (local) optimum operating point of the plant.
Model Parameterization Tailored to Real-Time Optimization
7
A proof of this result is easily obtained by noting that, upon convergence, the modified in (7) match the plant constraints G , and the gradients of the modified constraints G p cost and constraint functions match those of the plant (see also [10]). It follows that the active set is correctly determined and the converged solution satisfies the KKT conditions. Hence, there is a close link between the model- and modifier-adaptation methods in that the parameterization and the update procedure are both intended to match the KKT conditions. Essentially, modifier-adaptation schemes use a model-predictive control with a one-step prediction horizon. Such a short horizon is justified because the system is static. However, since the updated modifiers are valid only locally, modifieradaptation schemes require some amount of filtering/regularization (either in the modifiers or in the inputs) to avoid too aggressive corrections that may destabilize the system. 3.3. Direct-Input-Adaptation Methods This last class of methods provides a way of avoiding the repeated optimization of a process model by transforming it into a feedback control problem that directly manipulates the input variables. This is motivated by the fact that practitioners like to use feedback control of selected variables as a way to counteract plant-model mismatch and plant disturbances, due to its simplicity and reliability compared to on-line optimization. The challenge is to find functions of the measured variables which, when held constant by adjusting the input variables, enforce optimal plant performance [19,21]. Said differently, the goal of the control structure is to achieve a similar steadystate performance as would be realized by an (fictitious) on-line optimizing controller. In the presence of uncertainty, the inputs determined from off-line solution of problem (3) for nominal parameter values satisfy the NCO (4) but typically violate the NCO related to the plant itself. Hence, a rather natural idea is to correct the input variables so as to enforce the NCO for the plant [1,9,14]; in other words, the controlled variables are chosen as the NCO terms, with the corresponding set points equal to zero. Tracking of the NCO (4) consists of three steps: (i) determining the active set (positivity condition on Lagrange multipliers), (ii) following the active constraints, and (iii) pushing the sensitivity to zero. Determining the active set requires a switching strategy, whereby a constraint is included in the active set when it is attained, and deactivated when its Lagrange multiplier goes negative [29]. This switching logic renders the scheme more complex, and in the interest of simplicity, it may be assumed that the active constraints do not change. Note that such an assumption is always verified in the neighborhood of an optimal solution and is observed in many practical situations. Once the active set is known, the inputs are split into : (i) constraints-seeking directions that are used to track the active constraints, and (ii) sensitivity-seeking directions that are adapted to force the reduced gradients to zero. The active constraints G ap and the
G ap I P+ P , with P := , need to be measured. Since, in general, the constraint terms are easily measured, or can be reliably estimated, adjusting the inputs in the constraint-seeking directions to track the active constraints is rather straightforward [4,25,27]. Adjusting the sensitivity-seeking directions is more involved, mainly due to the difficulty in the measurement of the gradient terms. François et al. [9] proposed a two-time-scale adaptation strategy, wherein adaptation in the sensitivity-seeking directions takes place at a much slower rate than in the constraint-seeking directions.
reduced cost gradient r p :=
p
8
B. Chachuat et al.
Direct-input-adaptation methods obey the following equations (see Fig. 4):
(
k = k1 + con G ap ( k1 ), r p ( k1 )
(G
a p
)
(
( k ), r p ( k ) = swi p ( k )
)
)
(10) (11)
where con is the map describing the controller, such that con (0, 0) = 0 ; swi , the map describing the switching logic for determination of the active set. The handles for correction are the process inputs , i.e., no specific parameterization is required here. Both the active constraints and the reduced cost gradient are forced to zero, e.g., with a discrete integral-type controller.
Figure 4. Direct-input-adaptation method: Tracking the NCO using control
Direct-input-adaptation methods also possess nice theoretical properties, as summarized by the following theorem. Theorem 3. Let the information on the values of p be available and used to adapt the inputs and the active set given by (10-11). Then, upon convergence, the direct-inputadaptation scheme (10-11) reaches an (local) optimum operating point of the plant. Note that the active process constraints and reduced gradients are both zero upon convergence. Moreover, since the positivity of the Lagrange multipliers is guaranteed by the switching logic, the active set is correctly identified and the NCO are satisfied. The key question lies in the design of the controller. Unlike optimization-based schemes, the required smoothening is provided naturally via appropriate controller tuning. 3.4. Evaluation of the various methods A systematic approach for evaluating the performance of adaptive optimization schemes, named the extended cost design, has been presented in [30]. It incorporates measures of both the convergence rate and the effect of measurement noise. Interestingly, it is shown that in the presence of noise, a standard two-step algorithm may perform better, in terms of the proposed metric, than modified algorithms compensating for plant-model mismatch such as ISOPE. Another approach to performance characterization for adaptive optimization has been proposed in [15], which considers the backoff from active inequality constraints required to ensure feasibility. Therein, better adaptive optimization approaches produce smaller backoffs.
4. Use of Measurements for Feasible and Optimal Operation This section discusses the two main rows in Fig.1. The feasibility issue is addressed first, and various gradient estimation techniques are summarized next. 4.1. Feasible Operation In practical applications, guaranteeing feasible operation is often more important than achieving the best possible performance. Hence, first priority is given to meeting the
Model Parameterization Tailored to Real-Time Optimization
9
process constraints (such as safety requirements and product specifications) and only second priority to improving process performance in terms of the objective function. Interestingly, the results of a variational analysis in the presence of small parametric error support the priority given to constraint satisfaction over the sensitivity part of the NCO [6]. More specifically, it has been shown that, in addition to inducing constraint violation, failure to adapt the process inputs in the constraint-seeking directions results in cost variations in the order of the parameter variations ; in contrast, failure to adapt the inputs in the sensitivity-seeking directions gives cost variations in the order of 2 only. The ability to guarantee feasible operation is addressed next for the three classes of methods presented above. In model-adaptation methods, since the plant constraints are predicted by the process model, constraint matching – but not necessarily full KKT matching – is needed to guarantee feasibility; however, this condition may be difficult to meet, e.g., when the model is updated by matching a set of outputs not directly related to the active constraints. With modifier-adaptation methods, feasibility is guaranteed upon convergence, provided that all the constraint terms are measured [6]; yet, ensuring feasibility does not necessarily imply that the correct active set has been determined due to the use of possibly inaccurate cost and constraint gradients, e.g., when gradient modifiers are not considered. Finally, in direct-input-adaptation methods, feasibility is trivially established when the active set is known and does not change with the prevailing uncertainty. However, as soon as the active set changes, tracking the current set of active constraints may lead to infeasibility. A switching logic can be used to remove this limitation, but it requires experimental gradient information to be available; the use of a barrier-penalty function approach has also been proposed [26]. If feasibility cannot be guaranteed, conservatism can be introduced in the form of constraint backoffs. Such backoffs are also introduced to enforce feasibility when some of the constraints are difficult to measure. 4.2. Gradient Estimation Taking a system from a feasible to an optimal operating point requires accurate gradient information. In model-adaptation schemes, since the updated model is used to estimate the gradient, convergence is relatively fast. In the other two schemes, the gradient information has to be estimated experimentally, thereby slowing down convergence significantly. Perhaps the major bottleneck in modifier- and direct-input-adaptation schemes lies in the estimation of this gradient information. The finite-difference scheme used in the original ISOPE paper [19] is known to be inefficient for large-scale, slow and noisy processes. Hence, alternative techniques have been developed, which can be classified as either model-based approaches or perturbation-based approaches. Model-based approaches allow fast derivative computation by relying on a process model, yet only approximate derivatives are obtained. In self-optimizing control [12,21], the idea is to use a plant model to select linear combinations of outputs, the tracking of which results in “optimal“ performance, also in the presence of uncertainty; in other words, these linear combinations of outputs approximate the process derivatives. Also, a way of calculating the gradient based on the theory of neighbouring extremals has been presented in [13]; however, an important limitation of this approach is that it provides only a first-order approximation and that the accuracy of the derivatives depends strongly on the reliability of the plant model. The idea behind perturbation methods is to estimate process derivatives using variations in the operating point. Extremum-seeking control [1,14] attempts to obtain the cost
10
B. Chachuat et al.
sensitivity by superposing a dither signal to the plant inputs. In dynamic model identification, the plant is approximated by a dynamic model during the transient phase between two successive steady states [16,31,11]. Since the derivatives are calculated from the identified dynamic model, the waiting time needed for reaching a new steady state is avoided. Other perturbation-based approaches, which remove the disadvantage of requiring additional dynamic perturbations, consist in using current and past (steadystate) measurements to compute a gradient estimate based on Broyden’s formula [16]. For the case of multiple identical units operating in parallel, Srinivasan considered perturbations along the unit dimension rather than the time dimension, thereby allowing faster and more accurate derivative estimates [22]. In principle, the smaller the difference between the operating points, the more accurate the derivative approximation, but conditioning issues might arise due to measurement noise and plant disturbances. A way of avoiding this latter deficiency is presented in [10].
5. Discussion In this section, we take a critical look at the three classes of adaptive optimization methods described above in terms of various criteria. We also argue in favor of modifier-adaptation methods, in the sense that they provide a parameterization that is tailored to the matching of the KKT conditions. The analysis presented in Table 1 shows many facets of the problem. It is interesting to see that modifier-adaptation methods can be positioned between the model-adaptation methods and direct-input-tracking methods; several attractive features are shared between the first and second columns, while other features are shared between the second and third columns. The methods differ mainly in the handles and in the measurements that are used for correction. The major drawback of model-adaptation schemes is that KKT matching is required for convergence to a (local) plant optimum, which can be very difficult to satisfy with the (arbitrary) parameterization and (arbitrary) auxiliary measurements y p . In comparison, modifier-adaptation methods resolve the challenging task of selecting candidate parameters for adaptation by introducing the modifiers as handles. Also, the measurements p are directly related to the KKT conditions, and their number is equal to that of the handles , i.e., there results a square update problem. Hence, since these parameters are essentially decoupled, no sophisticated technique is required for the update of . Moreover, KKT matching becomes trivial, and reaching a (local) plant optimum is guaranteed upon convergence. This leads us to argue that modifier-adaptation methods possess the “adequate” parameterization and use the “adequate” measurements” for solving optimization problems on-line. Direct-input-adaptation methods differ from model- and modifier-adaptation methods in that a process model is not used on-line, thus removing much of the on-line complexity. Another important element of comparison is the use of experimental gradient information. The modifier- and direct-input-adaptation methods make use of experimental gradients to guarantee (local) optimality. However, obtaining this information is usually time consuming and slows down the entire adaptation scheme. Note that the use of an updated process model gives the ability to determine changes in the active set and typically provides faster convergence. Yet, in practice, the convergence of the model- and modifier-adaptation methods is often slowed down by the introduction of filtering that is required to avoid unstable behavior that would result because the corrections are local in nature.
11
Model Parameterization Tailored to Real-Time Optimization
Model-adaptation methods
Modifier-adaptation methods
Direct-input adaptation methods
Adjustable parameters
Dimension of parameters
n
ng + n (ng + 1)
n
Measurements
yp
p
p
Dimension of measurements
ny
ng + n (ng + 1)
ng + n (ng + 1)
p
None
y yp
Update criterion
2
2
Exp. gradient estimation
No
Yes
Yes
Repeated optimization
Yes
Yes
No
On-line use of process model
Yes
Yes
No
Model predictive
Model predictive
Any
Smoothening
External filter
External filter
Controller tuning
Choice of active sets
Optimization
Optimization
Switching logic
Requirement for feasibility (no gradient information)
Constraint matching
None
Correct active set
Requirement for optimality (with gradient information)
KKT matching
None
None
Controller type
Table 1. Comparison of various real-time optimization schemes
6. Conclusions This paper provides a classification of real-time optimization schemes and analyzes their ability to use measurements to track the necessary conditions of optimality of the plant. The similarities and differences between the various schemes are highlighted, and it is shown that modifier-adaptation schemes use a parameterization, measurements, and an update criterion that are tailored to the matching of KKT conditions. To improve the performance of adaptive optimization, it may be useful to combine specific features of the various methods. For example, the combination of model adaptation (which ensures fast convergence for the first few iterations and detects changes in the active set) with direct-input adaptation (which provides the necessary gradients in the neighborhood of the plant optimum) has been demonstrated in [24]. Another interesting combination would be to use a modifier-adaptation approach at one time scale and perform model adaptation at a slower rate, thus giving rise to a two-timescale adaptation strategy.
References 1. Ariyur K. B. and Kristic M., “Real-Time Optimization by Extremum Seeking Feedback”, Wiley, 2003. 2. Bazaraa M. S., Sherali H. D. and Shetty C. M., “Nonlinear Programming: Theory and Algorithms”, second ed., John Wiley and Sons, New York, 1993. 3. Biegler L. T., Grossmann I. E. and Westerberg A. W., “A note on approximation techniques used for process optimization”, Comput Chem Eng 9(2):201-206, 1985.
12
B. Chachuat et al.
4. Bonvin D. and Srinivasan B., “Optimal operation of batch processes via the tracking of active constraints”, ISA Trans 42(1):123-134, 2003. 5. Brdys M. A. and Tatjewski P., “Iterative Algorithms For Multilayer Optimizing Control”, World Scientific Pub Co, London UK, 2005. 6. Chachuat B., Marchetti A. and Bonvin D., “Process optimization via constraints adaptation”, J Process Control, in press. 7. Chen C. Y. and Joseph B., “On-line optimization using a two-phase approach: an application study”, Ind Eng Chem Res 26:1924-1930, 1987. 8. Forbes J. F. and Marlin T. E., “Model accuracy for economic optimizing controllers: the bias update case”, Ind Eng Chem Res 33:1919-1929, 1994. 9. François G., Srinivasan B. and Bonvin D., “Use of measurements for enforcing the necessary conditions of optimality in the presence of constraints and uncertainty”, J Process Control 15:701-712, 2005. 10. Gao W. and Engell S., “Iterative set-point optimization of batch chromatography”, Comput Chem Eng 29(6):1401-1409, 2005. 11. Golden M. P. and Ydstie B. E., “Adaptive extremum control using approximate process models”, AIChE J 35(7):1157-1169, 1989. 12. Govatsmark M. S. and Skogestad S., “Selection of controlled variables ans robust setpoints”, Ind Eng Chem Res 44(7):2207-2217, 2005. 13. Gros S., Srinivasan B. and Bonvin D., “Static optimization via tracking of the necessary conditions of optimality using neighboring extremals”, Proc ACC 2005, Portland OR, pp. 251-255, 2005. 14. Guay M. and Zang T., “Adaptive extremum seeking control of nonlinear dynamic systems with parametric uncertainty”, Automatica 39:1283–1294, 2003. 15. de Hennin S. R., Perkins J. D. and Barton G. W., “Structural descisions in on-line optimization”, Proc Int Conf PSE‘94, pp. 297-302, 1994. 16. Mansour M. and Ellis J. E., “Comparison of methods for estimating real process derivatives in on-line optimization”, Appl Math Mod 27:275-291, 2003. 17. Marlin T. E. and Hrymak A. N., “Real-time operations optimization of continuous process”, Proc 5th Int Conf on Chemical Process Control (CPC-5), Tahoe City NV, 1997. 18. Mönnigmann M. and Marquardt W., “Steady-state process optimization with guaranteed robust stability and feasibility”, AIChE J 49(12):3110-3126, 2003. 19. Morari M., Stephanopoulos G. and Arkun Y., “Studies in the synthesis of control structures for chemical processes, Part I”, AIChE J 26(2):220-232, 1980. 20. Roberts P. D., “An algorithm for steady-state system optimization and parameter estimation”, Int J Syst Sci 10:719-734, 1979. 21. Skogestad S. “Plantwide control: The search for the self-optimizing control structure”. J Process Control 10:487–507, 2000. 22. Srinivasan B., “Real-time optimization of dynamic systems using multiple units”, Int J Robust Nonlinear Control 17:1183–1193, 2007. 23. Srinivasan B. and Bonvin D., “Interplay between identification and optimization in run-torun optimization schemes”, Proc ACC 2002, Anchorage AK, pp. 2174–2179, 2002. 24. Srinivasan B. and Bonvin D., “Convergence analysis of iterative identification and optimization schemes”, Proc ACC 2003, Denver CO, pp. 1956-1961, 2003. 25. Srinivasan B., Primus C. J, Bonvin D. and Ricker N. L., “Run-to-run Optimization via Constraint Control”, Control Eng Pract 9(8):911-919, 2001. 26. Srinivasan B., Biegler L.T. and Bonvin D., “Tracking the necessary conditions of optimality with changing set of active constraints using a barrier-penalty function”, Comput Chem Eng 32(3):572-579, 2008. 27. Stephanopoulos G. and Arkun Y., “Studies in the synthesis of control structures for chemical processes, Part IV”, AIChE J 26(6):975-991, 1980. 28. Tatjewski P., “Iterative optimizing set-point control–The basic principle redesigned”, Proc 15th IFAC World Congress, Barcelona, 2002.
Model Parameterization Tailored to Real-Time Optimization
13
29. Woodward L., Perrier M. and Srinivasan B., “Multi-unit optimization with gradient projection on active constraints”, Proc 8th Int Symp on Dynamics and Control of Process Systems (DYCOPS), Vol 1, pp. 129-134, 2007. 30. Zhang Y. and Forbes J. F., “Extended design cost: A performance criterion for real-time optimization systems”, Comput Chem Eng 24:1829-1841, 2000. 31. Zhang Y. and Forbes J. F., “Performance analysis of perturbation-based methods for realtime optimization”, Can J Chem Eng 84:209-218, 2006.
This page intentionally left blank
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
15
Challenges for multi-scale modeling of multiple failure modes in microelectronics Juergen Auersperg, Bernhard Wunderle, Rainer Dudek, Hans Walter, Bernd Michel Abstract Design studies of electronics components on the basis of parameterized Finite Element Models and DoE/RSM-approaches (Design of Experiments/Response Surface Methods) are more and more performed for optimizations at early phases of the product development process. That is why electronics components especially in the field of RF (Radio Frequency), optoelectronics, high temperature and power applications are often exposed to extreme thermal environmental conditions, mechanical shock and vibrations. However, a continuous industry drive for miniaturization and function integration forces the development of feature sizes down to the nanometer regime. Simultaneously, the well known thermal expansion mismatch problem of the several materials, residual stresses generated by several steps of the manufacturing process and various kinds of inhomogeneity attribute to interface delamination, chip cracking and fatigue of interconnects, in particular. The applied methodologies typically base on classical stress/strain strength evaluations or/and life time estimations of solder interconnects using modified Coffin-Manson approaches. Recent studies show also how the evaluation of mixed mode interface delamination phenomena, classical strength hypotheses along with fracture mechanics approaches and thermal fatigue estimation of solder joints can simultaneously be taken into account. Over and above that, new materials will be introduced especially in Back-end of line (BEoL) layers of advanced Cu/Low-k 90, 45, … , 22 nanometer CMOS (Complementary Metal-Oxide Semiconductor) technologies. So, black diamond-I or black diamond-II as new materials are increasingly porous and interconnect materials or new functional layers come up as nano-particle filled high-tech compounds. Thus, it is to be checked whether it can be handled as homogeneous materials anymore. For sure, this will have most important impacts on the thermo-mechanical performance of the total IC (Integrated Circuit) tack. The problems appearing during packaging of CMOS-ICs at least showed that IC and package reliability are strongly interacted. Thus, the challenge for simulations in this field is not only the wide range of structural dimensions but also, the different approaches that have to be combined: Molecular or atomistic level simulations and “conventional” Finite Element Analysis (FEA) with global-local modeling, substructuring as well as fracture and damage mechanics, cohesive zone models, viscoelasticity, plasticity and creep of homogeneous constitutive models. Furthermore, it is known that multiple failure modes competitively act simultaneously wherefore, design optimizations have to incorporate all failure modes that are essential for the overall reliability. Moreover, considering that variables of the simulation models are naturally stochastic parameters leads to the consequence that all results show also scattering. First steps towards robust designs show the potential of the utilized FEA-based RSM/DOE approach to evaluate the thermo-mechanical reliability of various electronics assemblies in a more complex way giving at the same time a more solid basis for design optimizations.
This page intentionally left blank
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
17
Design and integration of policies to achieve environmental targets René Bañares-Alcántara Department of Engineering Science, University of Oxford, UK
Abstract Few problems are as urgent and important as climate change. Climate change mitigation policies are geographically and culturally dependent given the variability of resources, of access to technology and of national political constraints such as ensuring energy security, affordability and social acceptability. Thus, climate change mitigation hinges on devising integrated policies involving many mutually reinforcing and coordinated efforts in order to exploit synergies between policy tools and to avoid policy conflicts. The possible roles of chemical engineers in this problem are: • a traditional one, as providers of improved and new technologies, e.g. in the development of CO2 capture technologies, • a less conventional and recent one, as participants in the framing and development of policies, e.g. influencing the formulation of the UK energy policy [Clift 06], • a future role as providers of tools, methods and systems to support policy formulation, i.e. the development of effective and acceptable courses of action to reach explicit goals. The talk will address the last role. Important insights into a policy formulation methodology can be elicited from engineering design. It will be argued that engineering design and synthesis methodologies offer a productive framework and a suite of practical tools for supporting policy design and integration, i.e. providing alternative configurations of policy tools to use and how to schedule their phasing and implementation in order to achieve a reduction in greenhouse gas emissions. However, process and policy design are not identical and, as a result, complementary approaches have to be used to take into account their differences, in particular the pervasiveness of non-quantifiable factors. These ideas will be exemplified with two support systems being developed for energy and transport policy formulation.
References Clift, R. “Sustainable development and its implications for chemical engineering”. Chemical Engineering Science 61:4179-4187, 2006.
This page intentionally left blank
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
19
Computational chemical engineering modeling applied to energy and reactor design Luc Nougier IFP, France
Abstract Chemical engineering is the combination of physical, chemical, biological …operations on an energy or chemical plant. For process design, we have to carry out optimisations based on a multiple of parameters all the more so since the needs of processes in industry change very rapidly. These industries have to integrate new constraints linked to the energy cost and the environmental impact coupled with a need for more and more technical product. Chemical engineering will play a key role to maintain the efficiency of the industry in a global market in which the processes offer become more and more technological and has to take into account : . • higher system integration to minimised energy consumption by coupling different process steps (ie : coupling of endothermal and exothermal steps, reaction and separation….), . • better optimisation of units design, . • higher product selectivity to avoid or limit by-product, . • production of new products. To achieve these new developments the approach cover a large domain of technical disciplines and also a multiscale approach in time and length. This new complexity require to increase the relative weight of modeling and scientific calculation in the process development. For exemple, CFD calculation is currently used for the development of reactor technologies and reactor internal, but most of the time it is difficult to couple hydrodynamic modelisation and reaction modelisation. A lot of improvement are expected by coupling these two approaches. The molecular modelisation has also a large potential in process development and has to be coupled with more classical approach. For process integration, the thermodynamic optimisation is very useful mainly for developing new processes (pinch technology). The modeling tools have to be used in all the steps of process development taking into account a multiscale approach and without forgetting the measurement technologies needed for model validation.
This page intentionally left blank
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
21
Curricular and pedagogical challenges for enhanced graduate attributes in CAPE Ian T Camerona, Daniel R Lewinb a. School of Engineering, The University of Queensland, Brisbane, AUSTRALIA, 4072 b. PSE Research Group, Dept Chemical Engineering, Technion, Haifa 32000, ISRAEL
Extended Abstract Computer Aided Process Engineering (CAPE) undergirds and informs a wide range of decision making in the product and process life cycle. Life cycle phases that span the planning and conceptualization of product and process, through research and development and then onto design, construction, operation and decommissioning are permeated by CAPE activities. The importance of CAPE activities and their central role in the global engineering enterprise cannot be underestimated. These activities require the use of techniques and tools for informed decision making are shown in Figure 1.
EIA models
Finance models
Enviro
Prelim Elementary flowsheets flowsheets Pilot Physical properties
Logistics Optimization RCM models models
Flowsheet models
Planning Decon
Control models
Bioremed
at e R em ed i
D ec om
m
is si on
CFD
pe ra te
Molecular modelling C on ce pt
Nano
R &D
Reaction networks
CPM
Mechanical CFD
Micro
CPM
SCOR models
O
Meso
RMgt
D e de tail si ed gn
Macro
CPM
In st al l
Scenario planning
St ra te gi c
Length-time scale
Mega
Life cycle phase Figure 1 Some CAPE application areas across the life cycle phases
Yet, how well do we tackle the challenges of CAPE in curriculum design and deployment in higher education? What are the keys to effective development of graduate attributes and skills in the CAPE domain that can be achieved through innovative curricula and the learning environments that inform, challenge and prepare engineering graduates for work in a “model centric” world? What are the technological and informational forces that are rapidly shaping the way engineering is practised in the global context?
22
I.T. Cameron and D.R. Lewin
In this presentation, the authors seek to address some of these questions by reference to current trends in educational practice and the application of active learning principles that have been developed, deployed and assessed at institutions in Australia, Israel and elsewhere. In most cases these approaches have found extensive use over many years. It is vital that the debate is centred not just on individual, isolated courses that touch on some aspects of the CAPE issue, but that we start with holistic or systems thinking on curriculum development that provides integration and cohesion in the curriculum and leads to graduate attributes and skills necessary for the next generation of engineers. The curriculum challenge is seen as a cohesive pathway that exercises a strong thread of CAPE activities. Pathways need to build upon basic concepts, integrate new content which illustrates the relationships amongst the principal learning components and then drives that learning with realism and relevance to maintain student engagement. The curriculum challenge has to address the major issues of: • • • •
WHAT has the be learned: the content issue WHY it is to be learned: the rationale HOW it is to be learned: the process and methods WHEN it has to be learned: the pathway to be adopted
In terms of processes, there are numerous options available with the most effective focusing on active learning strategies. Figure 2 illustrates some well documented pedagogic approaches that have been adopted into curriculum delivery. They include problem and project based learning (PBL), project centred curricula (PCC) and Conceive, Design, Implement and Operate (CDIO) approaches.
Figure 2 Active learning pedagogies in curriculum delivery
The authors will explore these key issues and illustrate holistic approaches that impact on curriculum innovation. They will draw examples from a range of applications of these important pedagogic concepts.
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
23
Chemical Product Engineering: The 3rd Paradigm Michael Hill M Hill & Associates LLC, Mahwah, New Jersey 07430, USA, and Columbia University, New York, NY 10027, USA
Abstract New chemical products have historically been created by combining a broad knowledge of existing chemical products with scientific experimentation. Since a combinatorial explosion of product options will inevitably limit all experimental techniques, it should be preferable to minimize experimentation through a systematic consideration of product formulations prior to experimentation. This is the essence of product design and engineering. While the design of a chemical product and its manufacturing process are analogous, some critical differences are so fundamental that a new paradigm and new approaches are needed to successfully solve product design problems. In addition, chemical product design requires a methodology or algorithm to apply chemical engineering fundamentals. Product design techniques should draw largely on heuristics when data are limited, followed by more detailed calculations when data become available. Significant work is still needed to establish a comprehensive generic methodology for engineering chemical products in the absence of complete data. Keywords: Product Design, Product Engineering, Chemical Engineering Paradigm
1. Introduction Chemical Product Engineering and the related area of Chemical Product Design have recently received much attention within the chemical engineering community, with an exponential increase in published papers over the past decade. [1]. A chemical product may consist of an individual chemical, but more frequently it will be a mixture of chemicals with a set formulation and often a set microstructure. Chemical products of industrial interest include performance chemicals, semi-conductors, paints, cosmetics, inks, pharmaceuticals, personal care products, household products, and foods. [2,3] While new chemical product development has historically been the domain of chemists, the use of chemical products by consumers invariably involves some transformation of the product due to applied stresses, temperature gradients, physicochemical hydrodynamics, mass transfer, etc., making product use a “process” in the chemical engineering sense. [2,4] Thus the analysis of product behavior ultimately requires the same fundamentals as the analysis of process behavior, and is well suited to study by chemical engineers.
24
M. Hill
Notwithstanding the commonalities in the engineering analyses of a chemical product’s behavior and its manufacturing process, there are fundamental differences between the design of a chemical product and its manufacturing process. For example, chemical process design primarily seeks to identify the lowest cost process. Even process related issues like reliability, controllability, and pollution control ultimately translate into costs that must be minimized. Thus, process design easily lends itself to a mathematical treatment. In contrast, chemical product design seeks to obtain the most added value for a product through enhanced product properties. This is far more complex than a mathematical treatment to maximize profit, as profit will depend in some unidentified way upon a complex set of product properties that may not even be identified at the outset. Thus, product design and engineering must not only require new chemical engineering approaches, but even more fundamentally, a new mindset. 2. The 3rd Paradigm While various comments on chemical engineering paradigms have appeared over the years [1,5-7], an overuse of the word paradigm by society in general may have led to some confusion over the meaning of the term. One is reminded of the Dilbert comic strip where every engineer says his project is a paradigm but no one seems to know what that means! The term paradigm was popularized by Thomas Kuhn in his book, The Structure of Scientific Revolutions, first published in 1962. Borrowing the word from linguistics, Kuhn used the term to indicate a specific way of viewing scientific reality, the mindset of a scientific community. Some of Kuhn’s examples include Copernican astronomy, Newtonian dynamics, and quantum mechanics. Each of these paradigms affected the choice of problems that were considered worthy of solution, as well as acceptable approaches to solving those problems. [8] As pointed out by Kuhn, even when paradigms are known to be inadequate, their inadequacies are frequently minimized or even ignored by a scientific community. But if and when a paradigm reaches a crisis where its technical inadequacies are brought into focus, perhaps driven by social requirements, a new paradigm will arise to explain what the prior paradigm could not. Thus the inadequacies of Newtonian mechanics in explaining some observations that had been viewed as anomalies eventually led to Einsteinian dynamics, and the success of this new paradigm in explaining those observations opened up an entirely new set of problems as worthy of consideration. [8] Of course Newtonian mechanics is still useful and may even be considered as a special case of Einsteinian dynamics.
Chemical Product Engineering: The 3rd Paradigm
25
From this perspective, it should be appreciated that originally chemical engineering had no paradigm. Chemical processes were studied within the context of various industries, and so engineers studied processes to make soap, dyestuffs, sugar, etc. Without the mindset of a unifying principle, engineers did not look for and hence failed to see commonality between these processes. [9] Chemical engineering received its first paradigm in 1915 with the introduction of the unit operations concept. [3,9,10] This mindset allowed engineers to recognize commonalities between elements of chemical processes despite their use in different industries. Under this paradigm, chemical engineering was no longer the study of how to manufacture a specific commodity, but rather the study of unit operations. As a consequence, chemical process design became a matter of deciding which sequence of unit operations was most appropriate to manufacture a desired product. While still useful to the present day, the unit operations paradigm proved inadequate for solving some important classes of problems. This awareness led to the emergence of chemical engineering science as a second paradigm in the late 1950’s, as best exemplified by the textbook Transport Phenomena. [3,9-11] This approach taught engineers to analyze problems by thinking in terms of their underlying fundamental chemical and physical sciences, writing mathematical equations to describe the phenomena, and then solving those equations. The chemical engineering science paradigm may also be described as the “first principles” approach. The chemical engineering science paradigm is widely used today. In fact, its application has been broadened by the incorporation of biological science and new information technology tools. But as important as these latter elements have been, they have been incorporated into the existing chemical engineering science paradigm rather than lead to a new mindset. Similarly, specific techniques for solving various classes of chemical engineering problems are not new paradigms, for they fall within the current chemical engineering way of thinking. On the other hand, until recently the chemical engineering community largely ignored all product issues other than purity as irrelevant, focusing exclusively on processing while leaving product development to chemists. In the minds of many, chemical engineering is synonymous with process engineering. Hence product engineering will require a new mindset in addition to new chemical engineering approaches, and should therefore be recognized as a third chemical engineering paradigm, as first hinted in 1988. [9] Of course, product engineering as a paradigm does not preclude other paradigms from emerging, nor does it replace previous paradigms. Process engineering may even be considered as a special case of product engineering.
26
M. Hill
But a product engineering mindset is essential if chemical engineers are going to be able to solve problems where both the product and its manufacturing process must be identified, an entirely new and important class of problems. 3. Product Design Methodologies New chemical products have historically been created by combining a broad knowledge of existing chemical products with scientific experimentation. Product development is also at times accelerated through high-throughput experimentation, where large numbers of products are simultaneously made in small quantities, or through experimental design, where statistical techniques reduce the number of experiments performed. Nevertheless, these techniques have their limitations. For example, it is impractical to use high-throughput experimentation to make large numbers of structured products (like emulsions or composite powders) in small quantities. Similarly, experimental design can help determine optimal levels of a specified component but a combinatorial explosion will frequently prevent selection from a list of all potential components. Thus, chemical product development is all too often random trialand-error experimentation at present. However, the systematic identification of problem solutions should be superior to a random identification of solutions, either because better solutions can be identified or because acceptable solutions can be identified sooner or with less resource. So while it is unrealistic to eliminate all experimentation, it would be desirable to minimize experimentation through the introduction of a systematic consideration of product formulations prior to experimentation. From this perspective, the object of product design is to specify a small set of formulations likely to meet the product requirements, and which can be confirmed or refined through experimentation. Thus, chemical product design and engineering should be viewed as a phase of chemical product development that should precede a more focused experimental program. Analogous to chemical process design, chemical product design requires a methodology or algorithm to apply chemical engineering fundamentals. Cussler and Moggridge proposed a generic framework for chemical product design, suggesting a 4-step algorithm: (1) identify customer needs, (2) generate ideas to meet those needs, (3) select among the ideas, and (4) manufacture the product. They also admit that this framework is a simplification that tries to come down on the side of universal applicability rather than effectiveness in specific cases. [12] While this framework is an excellent starting point, it may be useful to expand on it. People who specialize in understanding consumers and market trends typically identify customer needs, often before chemical engineers are assigned to a product design project. Nevertheless, chemical engineers can help refine the
Chemical Product Engineering: The 3rd Paradigm
27
understanding of consumer needs through their understanding of what is physically possible. Issues surrounding the design of a manufacturing process for complex chemical products have been discussed elsewhere [2,13,14], so I will focus on the remaining two steps, namely how ideas can be generated to meet customer needs, and how to best select from among those ideas. These steps must be at the heart of a chemical product design methodology. In practice, significant guidance is needed as to how to generate options and how to best select from among them. This is not simply a matter of brainstorming ideas and selecting the best option. While brainstorming and other creativity techniques are often useful for generating novel approaches to problems, a generic methodology is needed to systematically transform each novel approach into a specific set of product alternatives, and to quantitatively analyze those alternatives so as to select from among them. 4. Design of Homogeneous Products 4.1. Overview Having taught chemical product design to undergraduates at Columbia University, my colleagues and I have developed a useful methodology for designing homogeneous chemical products when limited data are available. This methodology has nine steps, and can guide a student team through a product design problem of moderate difficulty, each step requiring one week for a team of 3-4 students to complete, except steps 3, 4 and 5, which likely need two weeks each. Thus the course neatly fits into the time constraints of a university semester. The methodology assumes that the target behavior of the new chemical product has already been specified, eliminating the need for a step to determine customer needs. Also, since the required products are assumed homogeneous, their properties will result solely from their components and not a product microstructure generated during processing. This allows us to design the product and process sequentially rather than simultaneously, greatly simplifying the methodology and making it well within the grasp of undergraduates. Thus the procedure loosely follows the 4-step procedure of Cussler and Moggridge [12], but adds additional important details. For example, this procedure includes an analysis of market realities. A chemical product cannot be designed without a consideration of whether the proposed product will be profitable. Hence specific steps to assess the marketplace and determine profitability are included. In addition, recognizing that product design is only the first stage of product development and must be followed by a focused experimental program, the procedure includes an analysis of all uncertainties that should be followed up by experimentation.
28
M. Hill
In addition, the methodology recognizes a key difference between the economics of commodities and specialty products that is easily overlooked. There is little risk that a commodity chemical manufactured by a new manufacturer or plant will go unsold if it is priced comparable to the competition. This is because manufacturers are generally unable to differentiate their commodity products from those of their competitors if they are priced the same, and so by the laws of supply and demand, any small increase in supply will lead to a small decrease in price for all manufacturers of the commodity as the market absorbs all the commodity produced by the new manufacturer. As all of the commodity manufactured at a new plant will sell at this new market price, the primary business decision is whether the investment in a new plant is justified by its return. On the other hand, since chemical products are differentiated by their performance specification, a new product will be governed by its own supply and demand equilibrium, and there will be no guarantee that a new chemical product can be sold at any price. There is no point in trying to calculate the return on investments (a cash flow transient) if the business proposition is not profitable in the steady state, i.e., with investments ignored. Hence before a prospective manufacturer considers whether the investment is justified by its return, ongoing profitability must be assessed first. This is typically a calculation of the market size that must be achieved for revenue to cover fixed costs, a situation referred to as “break-even”.1 [15] The methodology follows below. 4.1.1. Investigate Current Products The designer should begin by investigating current products, if any, in the marketplace – price, composition, the specific function of any components, strengths and weaknesses (from both a customer/consumer and a supplier perspective), any hidden costs, and total market size. Even if there is no product just like an intended product currently in the market, there may be other kinds of products indirectly fulfilling the same end function. For example, instead of using a device to purify drinking water, people may be drinking impure water and going more often to the doctor to treat water-borne illness. This will all be important information for setting an appropriate price for the new product, which in turn will be critical for determining whether the new product will be profitable.
1
Break-even, the market size size needed for revenues to cover ongoing fixed costs, is not the same as the payback period, the time required for cash flow to cover an investment. Break-even deals with steady state issues and is measured in either units of money or product volume; payback period deals with the cash flow transient and is measured in units of time.
Chemical Product Engineering: The 3rd Paradigm
29
4.1.2. Initial Technical Analysis The mechanism(s) by which the new product may be able to work should be analyzed next. Consider the implications each mechanism will this have on the physical properties of the product. Also, identify the underlying chemical engineering phenomena (e.g. thermodynamics, reaction kinetics, transport phenomena, etc.) that will be relevant to understanding the behavior of the product. Where there are multiple properties that must be met simultaneously, consider if there are classes of compounds that can provide some of the required properties if they were present as components. If so, assume that the complete required property set can be decomposed into subsets of properties which can be achieved separately through their own components. This will allow the complete property set to be achieved by combining all components. Also identify any classes of compounds that would be inappropriate in the new product. This fundamental understanding will be later used to model the properties of the product. For example, consider the problem of formulating a biodegradable deicer for airplane wings. One would likely decide that freezing point depression is a more appropriate deicing mechanism than raising surface temperature by heat generation, as the latter effect would be temporary. This suggests that the product should contain a freezing point depressant. However, the product must also adequately wet and spread over the aircraft surface, not cause corrosion to wet metal surfaces, and biodegrade at acceptable rates. As it is unlikely that one compound will meet all these criteria, it can be assumed that the product will consist of (1) compounds that adequately depress the freezing point yet also biodegrade at acceptable rates, (2) compounds to ensure wetting, i.e. surfactants, and (3) compounds to prevent corrosion, i.e. anti-corrosion agents. 4.1.3. Build Product Property Models For each property subset, the understanding of the underlying chemical engineering phenomena can be used to derive a set of equations that can predict the relevant behavior as a function of composition. While simplifying assumptions may be made, be careful not to oversimplify. Verify qualitatively that the models will be useful for predicting the relevant behavior. Next, list all physical parameters that will be needed to apply the model with any candidate compound. In the absence of direct experimental data, decide how the needed physical parameters will be obtained (e.g. tabulated data, appropriate correlations, group contribution methods, etc.) For example, designing a biodegradable aircraft deicer would require a model of freezing point depression so that one could predict the mass of ice melted per mass of deicing compound at a given temperature. However, assuming ideal solution behavior leads to the unlikely conclusion that the only property governing freezing point depression is molecular weight, so solution ideality is
30
M. Hill
clearly an oversimplification. In addition, the design would require a model of drainage rate off aircraft surfaces so that one could predict time to product failure, as well as a model of biodegradation. These models in turn lead to a need for various physical parameters, including activity coefficients, heats of fusion, and viscosity. 4.1.4. Generate Alternatives For each property subset, generate as large a list of potential candidates as is possible, based on an understanding of the underlying chemistry. This may be done by computer generation of alternatives or by searching through tabulated databases. Using the various product property models and any other relevant factors, cull each list by eliminating candidates that are inappropriate. 4.1.5. Select Product Composition For each property subset, define overall performance by assigning a weighting factor to each property in the set. In the example of the aircraft deicer, while there may minimum targets for freezing point depression and biodegradation that must be simultaneously achieved for a formulation to be given further consideration, assigning appropriate weighting factors to these properties will allow the product designer to consider performance tradeoffs in identifying the formulation with the best performance. Next obtain raw material costs for compounds that simultaneously meet all the important criteria within that property subset, and using the property models and weighting factors, rank all remaining candidates for their raw material costs on an equal overall performance basis. Identify any compounds that are less expensive than those used in current products on an equal overall performance basis, including hidden costs. Assuming that the complete required property set can be achieved by combining the components for each property subset, identify an overall composition to recommend for experimental study. 4.1.6. Design the Process For the preferred composition, chose a base case plant capacity and perform a preliminary process design. This preliminary process design should include a process flow sheet, a material balance for each stream, and sizing of all major equipment. Determine how much capital will be required to build this plant as a function of capacity. 4.1.7. Analyze the Risks Identify the key technical risks associated with this project, and recommend how these risks should be managed. This should include a listing of all key assumptions that were made in designing the product and its process, and an
Chemical Product Engineering: The 3rd Paradigm
31
experimental plan for corroborating the conclusions drawn from these assumptions. 4.1.8. Analyze Finances for Ongoing Costs Based on cost/performance of the preferred composition and current products, identify a recommended selling price for the new product. Considering all available factors, identify the market share that may be expected at the recommended selling price. Making reasonable estimates, identify the expected variable costs and fixed costs associated with the new product.2 Identify the market share required for break-even, and compare to the expected market share to determine if the new product is likely to be profitable on an ongoing basis. Calculate the net profit expected on an ongoing basis. 4.1.9. Analyze Finances for Investments Making reasonable estimates, calculate the investment expenses that will be required. Given the expected market share and reasonable assumptions for the ramping up of sales, calculate how long will it take to recoup the initial investment while meeting the internally required discount rate. Based on this analysis, decide if the investment should be recommended. 4.2. Discussion This product design methodology will identify a product that meets the preliminary performance specification, and although it assesses both ongoing profitability and return on investments, it guarantees an acceptable level of neither. However, as with all design, product design should be approached iteratively. Once a product designer completes the last step of this method, he will know the various factors that influence product performance and economics. In addition, there may have been multiple product possibilities identified by the methodology, some of which may have been eliminated prematurely. Hence the product designer will be in a position to take a fresh look at all previous decisions and explore the impact of these decisions on ongoing profitability and return on investment. It is also possible that the product designed by this procedure can be the starting point for mathematical optimization. Since the product that offers maximum performance regardless of costs is unlikely to be the product that offers 2
Variable costs are ongoing costs proportional to sales volume, and include items like raw materials and delivery charges. Fixed costs are ongoing costs treated as independent of sales volume, although more correctly they are step functions of sales volume. These include items like depreciation and administrative overheads. [15] Some costs, like labor and utilities, fall somewhere in between these two idealizations, and may be treated as either. Note that a fixed capital investment, unlike depreciation, is not an ongoing cost, and hence is not a fixed cost.
32
M. Hill
maximum profitability, there is value in simultaneously simulating and optimizing the effects of product performance, consumer response, and microeconomics. [16] As the focus of the product design must be sufficiently narrowed to permit this approach, the procedure outlined above is a good starting point. 5. Design of Structured Products The methodology proposed above assumes that a homogeneous product can achieve all the required product properties. This ignores the class of chemical products known as structured products, which achieve their properties through a microstructure that is determined by the interaction of its components and the manufacturing process. [17] Product engineering for structured products will be particularly difficult, as the product and process must be designed simultaneously. [2] Here again, a generic methodology is needed to systematically transform each novel approach into a specific set of product alternatives, and to quantitatively analyze those alternatives so as to select from among them. As with process design, this product design methodology would likely be hierarchical and iterative. Two primary approaches are possible: (1) generation and systematic reduction of the number of alternatives through heuristics, and (2) optimization of the set of all potential alternatives through mathematical programming. By analogy to what has been concluded about process design, it can be expected that product design techniques will draw largely on heuristics when data are limited, followed by more detailed calculations later on. [18] Where sufficient data to enable a complete mathematical representation of the product-engineering problem exists, mathematical techniques exist for their solution. However, significant work is still needed to establish a comprehensive generic methodology to generate and systematically reduce the number of alternatives through heuristics, so that product engineering can be accomplished even in the absence of complete data. Recent work has established how to mathematically represent the generic product-engineering problem [19], and mathematical programming has been successfully applied to these problems. [20] Of course, these techniques can only be applied where sufficient data are available to enable a complete mathematical representation of the product-engineering problem. Conversely, in the early stages of design when such data are generally lacking, heuristics are needed to systematically generate and analyze alternatives. Others have begun to identify product-engineering heuristics within specific product contexts [21-23], but a comprehensive generic methodology to generate and systematically reduce the number of alternatives through heuristics has yet to be established for the general problem.
Chemical Product Engineering: The 3rd Paradigm
33
6. Conclusions The methodology for design of homogeneous products outlined in Section 4 highlights some of the real issues that chemical engineers face in product design. These problems may be quite rich despite the constraint that the product has no microstructure. On the other hand, a comprehensive generic methodology for structured products as suggested in Section 5 would be significantly more complex and would require significant work to develop. However, this methodology would allow structured products to be engineered even in the absence of complete data, accelerating new product development well beyond the capabilities of purely experimental techniques.
References [1] R. Costa, G. D. Moggridge, and P. M. Saraiva, AIChE J, 52 (2006) 1976 [2] M. Hill, AIChE J, 50 (2004) 1656 [3] E. Favre, L. Marchal-Heusler, and M. Kind, Trans IChemE, 80 (2002) 65 [4] M. F. Edwards, Chem. Eng. Res. Des., 84 (2006) 1 [5] J. Villermaux, Chem. Eng. Sci., 48 (1993) 2525 [6] R. A. Mashelkar, Chem. Eng. Sci., 50 (1995) 1 [7] G. Stephanopoulos and C. Han, Comp. Chem. Eng. 20 (1996) 143 [8] T. S. Kuhn, The Structure of Scientific Revolutions, University of Chicago Press, Chicago, 1996 [9] Committee on Chemical Engineering Frontiers, Frontiers in Chemical Engineering: Research Needs and Opportunities, National Academy Press, Washington, 1988 [10] J. Wei, ChemTech, 26 5 (1996) 16 [11] R. B. Bird, W. E. Stewart and E. N. Lightfoot, Transport Phenomena, Wiley, New York, 2002 [12] E. L. Cussler and G. D. Moggridge, Chemical Product Design, Cambridge University Press, New York, 2001 [13] F. M. Meeuse, J. Grievink, P.J.T. Verheijen and M.L.M. Van der Stappen, “Conceptual Design of Processes for Structured Products” in M. F. Malone, J. A. Trainham and B. Carnahan (eds.) Fifth International Conference on Foundations of Computer Aided Process Design, AIChE Symp Ser No 323, 2000, pp. 324-328 [14] F. M. Meeuse, “Process Synthesis for Structured Food Products” in K. M. Ng, R. Gani, and K. Dam-Johansen (eds.) Chemical Product Design: Towards a Persepective Through Case Studies, Elsevier, Amsterdam, 2006, pp. 167-179 [15] W. C. Lawler, “Cost-Volume-Profit Analysis” in J. L. Livingstone and T. Grossman (eds.) The Portable MBA in Finance and Accounting, Wiley, New York, 2002, pp. 102-124 [16] M. J. Bagajewicz, AIChE J 53 (2007) 3155 [17] M. F. Edwards, IChemE North Western Branch Papers No. 9 (1998) [18] J. M. Douglas and and G. Stephanopoulos, “Hierarchical Approaches in Conceptural Process Design: Framework and Computer-Aided Implementation”, in L. T. Biegler and M. F. Doherty (eds.), Fourth International Conference on Foundations of Computer Aided Process Design, AIChE Symp Ser No 304, 1995, pp. 183-197 [19] R. Gani, Comp. Chem. Eng., 28 (2004) 2441 [20] A. K. Sunol, “A Mixed Integer (Non) Linear Programming Approach to Simultaneous Design of Product and Process”, in L. T. Biegler and M. F. Doherty (eds.), Fourth
34
M. Hill International Conference on Foundations of Computer Aided Process Design, AIChE Symp
Ser No 304, 1995, pp. 276-279 [21] K. Y. Fung and K. M. Ng, AIChE J, 49 (2003), 1193 [22] C. Wibowo and K. M. Ng, AIChE J, 48 (2002) 1212 [23] C. Wibowo and K. M. Ng, AIChE J, 47 (2001) 2746
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
35
Simulation in nuclear engineering design; Christian LATGE C.Latgé, Research Director, French Atomic Energy Commission, CEA-DEN-DTN , Cadarache Research Center, 13108 Saint Paul lez Durance FRANCE
Abstract The development of a new system or process in nuclear field requires generally first to select structural material and coolant and identify associated critical issues, which are inherent in the design and safe operation of the system or process which has to be developed. The design of a system or process has to deal with neutronics, thermal hydraulics, mass and heat transfer, and their consequences on heat deposition, materials structure mechanics, coolant technologies, control systems and operational procedures. All these related studies, using analytical, numerical and experimental approaches, have the following main objective: assessment of reliability and safety aspects which might endanger the integrity and operability of the system, during the life duration; this assessment contributes to the definition and evaluation of control systems, countermeasures, and more generally the preparation of licensing. Selection of best design options requires the use of simulation tools in order to size the individual components and demonstrate the reliability of the whole system or process. Thanks to some examples, ie the design of a spallation target for nuclear waste transmutation, within the framework of an international project, we will illustrate the design strategy of a prototypical integrated system. An extension to some other specific fields of research in chemical engineering for nuclear applications will be performed. Keywords: nuclear engineering, integrated prototypical systems, simulation tools
This page intentionally left blank
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
37
Supply Chain Risk Management through HAZOP and Dynamic Simulation Arief Adhityaa, Rajagopalan Srinivasana, b, I.A. Karimib a
Institute of Chemical and Engineering Sciences, 1 Pesek Road, Jurong Island, Singapore 627833, Singapore b Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore 117576, Singapore
Abstract In today’s globalized economy, supply chains strive to be increasingly efficient and effective by adopting strategies such as outsourcing, just-in-time practices, and lean inventory. However, these measures to operate the supply chain more efficiently often lead to increased fragility. As uncertainties become more prevalent and disruptions arise from many sources, supply chain risk management has become imperative. Considering the complexity of today’s supply chains and their operations, this paper proposes a systematic framework for supply chain risk management. Within the framework, this paper presents a structured methodology for risk identification and consequence analysis. Following the well-established HAZard and OPerability (HAZOP) analysis method in process safety, supply chain risk identification can be performed by systematically generating deviations in different supply chain parameters, and identifying their possible causes, consequences, safeguards, and mitigating actions. Consequence analysis can be conducted using a dynamic simulation model of the supply chain operations. The application and benefits of the proposed approach are demonstrated using a refinery supply chain case study. Keywords: Disruption Management, Uncertainty, Refinery, Supply Chain Modeling.
1. Introduction A supply chain (SC) comprises all the entities and activities required to deliver final products to end-customers – encompassing procurement, transportation, storage, conversion, packaging, etc. Present-day SCs involve numerous, heterogeneous, geographically distributed entities with varying dynamics, complexities, and uncertainties. Complex maze of the network, unpredictable dynamics, information delay, limited visibility, and involvement of disparate entities with varying goals complicate SC decision making. Furthermore, today’s SC operations are subject to various operational and disruption risks. Operational risks are uncertainties expected in day-to-day operations such as variations in supply, demand, production, transportation, and cost. Disruption risks arise from natural or man-made adverse events which cause variations beyond the expected range such as earthquakes and terrorist attacks. SC risk management is critical to ensure continuity of profitable operations amidst these risks. In this paper, we present a framework for SC risk management and demonstrate its application in a refinery SC. The refinery SC has many sub-processes such as crude procurement, planning, scheduling, oil trading, logistics, etc. At the center of this SC lie the oil refining operations. Refining is a complex process which involves a number of operations to transform crude oil into valuable products. The refinery SC begins from the oil
38
A. Adhitya et al.
reservoirs, found most abundantly in the Middle East region, and tapped via both ground fields and offshore platforms. Transportation of the crude to various processing plants/refineries around the world is carried out mostly by large ships called Very Large Crude Carriers (VLCCs) or pipelines. Even with extensive networks and carefully planned schedules, transportation times are relatively long; it takes 4-6 weeks for a VLCC carrying crude oil from the Middle East to reach refineries in Asia. Such long periods make crude supplies easily susceptible to disruptions, leading to failure to meet customers’ demands or a crude stock out. This is a critical problem as it would compel unit shutdowns and result in large losses. A single crude mix allows numerous products and their variants to be produced through a suitable alteration of processing conditions. Accordingly, refineries must adapt their operations to the different crude batches to maintain the required product specifications, which gives rise to differing operating costs. Further, since crude oil prices, product demands and prices fluctuate highly, optimization needs to be done frequently. Other key features of the refinery SC are large inventories, need for safety-first, sensitivity to socio-political uncertainties, environmental regulations, and extensive trading. Hence, there is clearly a need for risk management in the refinery SC. 1.1. Literature Review SC risk management is a growing research area. Chopra and Sodhi (2004) group SC risks into eight categories (disruptions, delays, systems, forecast, intellectual property, procurement, receivables, inventory, and capacity) and give general mitigating strategies for each category. Kleindorfer and Van Wassenhove (2004) discuss two types of risk management issues in global SCs: matching supply to demand and addressing disruptions to SC activity. Mishra, et al. (2003) present an agent-based decision support system to manage disruptions in a refinery SC. In the event of a disruption, agents collaborate to identify a holistic rectification strategy using heuristic rules. Since there is limited literature on structured and elaborate methodology for SC risk management, this paper attempts to propose one such methodology.
2. Framework and Methodology for Supply Chain Risk Management The proposed framework for SC risk management is illustrated in Figure 1 and comprises the following steps: 1. Risk identification: The first step is to recognize uncertainties and risks faced by the SC. With globalization and increased outsourcing practices, the number of parties involved in the SC and the links connecting them have increased significantly. Hence, some risks may not be obvious and it is important to have a structured method for risk identification, as presented in Section 2.1. 2. Consequence analysis: Once the risks have been identified, their consequences have to be analysed using an appropriate model of SC operations. The disruptions due to one particular risk or a combination of risks can be simulated and propagated through the SC model and the effects analysed. In a complex SC, there could be important domino effects. These should be explicitly considered in the analysis. Section 2.2 presents a dynamic simulation model of the integrated refinery SC which enables such analysis. 3. Risk estimation: Risk is usually quantified in financial terms and/or ranked according to some pre-defined criteria. The frequency or probability of each risk materializing is estimated. The risk is quantified in two dimensions: its frequency/probability and its severity/consequence, taking into account the effects of mitigating actions and safeguards, if any.
Supply Chain Risk Management Through HAZOP and Dynamic Simulation
Risk identification
List of detected risks
Consequence analysis
Risk estimation
List of risks and their estimates
List of risks, their safeguards and mitigating actions
Significant changes such that risk study is necessary
Risk monitoring
List of risks and their effects
KPIs and supply chain changes
Risk mitigation
39
Risk assessment No
Supply chain operation
Risk acceptable? Yes
Figure 1. Proposed framework for SC risk management
4. Risk assessment: The risk management team decides whether the risk quantified in the previous step is acceptable based on experience, industry standards, benchmarks, or business targets. If not, additional mitigation actions or safeguards are required. 5. Risk mitigation: Mitigating actions and safeguards such as emergency procedures and redundancies have to be developed for the risks, based on both the SC model and inputs from the risk management team or relevant personnel. Two types of mitigating action can be differentiated – preventive and responsive. Once the risks have been deemed acceptable, SC operations proceed with the appropriate safeguards and mitigating actions in place. 6. Risk monitoring: The SC structure and operation do not remain stationary but changes regularly due to, for example, new suppliers, new regulations, new operating conditions, new products, etc. The risk management team should continually monitor the SC for new risks. The team might be required to start from step (1) to consider the new risks arising from these changes. 2.1. Risk Identification through HAZOP For risk identification, this paper proposes to employ the HAZard and OPerability (HAZOP) analysis method from chemical process risk management. SC networks are in many ways similar to chemical plants. Drawing from this analogy, we propose to represent SC structure and operations using flow diagrams, equivalent to process flow diagrams (PFDs). A simplified flow diagram of the refinery SC is shown in Figure 2. Following the well-established HAZOP method, SC risk identification can be performed by systematically generating deviations in different SC parameters, and identifying their possible causes, consequences, safeguards, and mitigating actions. The deviations are generated using a set of guidewords in combination with specific parameters from the flow diagrams. Table 1 gives a non-exhaustive list of these guidewords and parameters. The guideword “Low” can be combined with a flow to result in, for example, the deviation “Low demand”. Possible causes and consequences can be identified by tracing the flows in the diagram. Safeguards are any items or procedures which help to protect against a particular deviation. It could protect against the deviation before it occurs, i.e. reducing the frequency, or help to recover quickly and minimize impact after it occurs, i.e. reducing the severity. An example of the former is safety stock, which protects against demand uncertainty; an example of the latter is insurance. Mitigating actions are additional items or procedures on top of any existing safeguards which are deemed necessary to manage the deviation.
40
A. Adhitya et al.
Figure 2. Simplified refinery SC flow diagram Table 1. Sample guidewords and parameters for HAZOP
Guidewords No High Low Early/late Parameters Material flow Information flow Finance flow
Meaning None of the design intent is achieved Quantitative increase in a parameter Quantitative decrease in a parameter The timing is different from the intention Raw material, side product, energy, utility, etc Order, quote, forecast, message, signal for action, etc Cash, credit, share, receivables, pledge, contract, etc
Supply Chain Risk Management Through HAZOP and Dynamic Simulation
41
2.2. Consequence Analysis through Dynamic Simulation For consequence analysis, we have developed a dynamic simulation model of the refinery SC, called Integrated Refinery In-Silico (IRIS) (Pitty et al., 2007). It is implemented in Matlab/Simulink (MathWorks, 1996). Four types of entities are incorporated in the model: external SC entities (e.g. suppliers), refinery functional departments (e.g. procurement), refinery units (e.g. crude distillation), and refinery economics. Some of these entities, such as the refinery units, operate continuously while others embody discrete events such as arrival of a VLCC, delivery of products, etc. Both are considered here using a unified discrete-time model. The model explicitly considers the various SC activities such as crude oil supply and transportation, along with intra-refinery SC activities such as procurement planning, scheduling, and operations management. Stochastic variations in transportation, yields, prices, and operational problems are considered. The economics of the refinery SC includes consideration of different crude slates, product prices, operation costs, transportation, etc. The impact of any disruptions or risks such as demand uncertainties on the profit and customer satisfaction level of the refinery can be simulated through IRIS.
3. Case Study This case study is based on the refinery SC flow diagram in Figure 2. We consider the parameter “Crude arrival”, which is the material flow from the jetty to the refinery crude tanks (marked by a star in Figure 2), and the guideword “No” to derive the deviation “No crude arrival”. To study the possible causes of this deviation, we trace backward from the crude arrival flow and find the jetty, shipper, and supplier entities. No crude arrival could be caused by unavailability or disruption to any of these entities, e.g. jetty closure, shipper unreliability, or supplier stock-out. The possible consequences can be examined by tracing forward from the crude arrival flow, from which we find the crude tanks, processing units, product tanks, shipper, and customers. Thus, the possible consequences of no crude arrival are low inventory in the crude tanks, possible out-ofcrude situation which leads to operation being disrupted, low inventory in the storage tanks, low product shipment to customers, and unfulfilled demand. Safeguards for this deviation are required to cover for the crude which is not arriving. These could be in the form of crude safety stock or emergency crude procurement. Since shipper unreliability is one possible cause, a suitable mitigating action could be to consider engaging a more reliable shipper. Other mitigating actions include establishing better communication and transparency with suppliers and shippers for timely notice of any delay, and rescheduling to avoid shutdown by reducing throughput until the crude arrives. These HAZOP results are summarized in Table 2. Consequence analysis of no crude arrival due to delay in transportation is performed using IRIS simulations. In this case, the refinery would like to evaluate the mitigating action of engaging a more reliable shipper. The existing shipper has a 10% probability of late crude delivery while the new shipper is more reliable with a 5% probability of delay. However, the new shipper on average costs $30million more than the existing one. The refinery also considers having a safeguard in the form of safety stock. Hence, four cases are evaluated: with and without safety stock for each shipper option. The resulting profit and customer satisfaction from these cases are shown in Table 3. Safety stock can increase customer satisfaction to 95% despite low existing shipper reliability. However, profit suffers a lot from low shipper reliability. This is because of high shutdown costs. Demand backlog can be satisfied in the next immediate cycle, hence customer satisfaction does not suffer much from shutdown. Safety stock cannot make
42
A. Adhitya et al.
up for poor performance of shipper. In both cases (with and without safety stock), the new shipper increases the profit by more than $50million. Since the increase in profit is more than the increase in cost, it is recommended to switch to the new shipper. Further, safety stock is also recommended as it increases both customer satisfaction and profit.
4. Concluding Remarks Risk management is critical for today’s SCs. In this paper, we propose a systematic framework for SC risk management and structured methodology for risk identification and consequence analysis, demonstrated in a refinery SC. The proposed HAZOP method for risk identification has two notable advantages. It is systematic, because the deviations studied are generated using pre-defined guidewords and pertinent system parameters, as opposed to ad-hoc scenario analysis. It is also complete, because it is structured around a representation of the whole process in the form of flow diagrams, as opposed to other methods with limited scope such as checklist. Consequence analysis is performed through IRIS, a dynamic simulation model of the refinery SC. Risk probability estimation, cost-benefit analysis and optimization of risk management strategies are the direction of our current work.
References S., Chopra and M. S. Sodhi, 2004, Managing Risk to Avoid Supply Chain Breakdown, MIT Sloan Management Review, 46, 1, 53-61. P. R. Kleindorfer and L. N. Van Wassenhove, 2004, Managing Risk in Global Supply Chains, In H. Gatigon and J. Kimberly (eds.), The Alliance on Globalization, Cambridge University Press, Chapter 12. MathWorks, 1996, Using Simulink: Version 2. M. Mishra, R. Srinivasan, and I. A. Karimi, 2003, Managing disruptions in refinery supply chain using an agent-based decision support system, Presented at the AIChE annual meeting, San Francisco, CA, Nov 16-21. S. S. Pitty, W. Li, A. Adhitya, R. Srinivasan, and I. A. Karimi, 2007, Decision Support for Integrated Refinery Supply Chains. 1. Dynamic Simulation, Computers and Chemical Engineering (In Press). Table 2. HAZOP results for crude arrival delay
Deviation No crude arrival
Causes
Consequences
Safeguards
Jetty unavailability; Shipper disruption; Supplier stockout
Low stock, outof-crude; Operation disrupted; Demand unfulfilled
Safety stock; Emergency suppliers
Mitigating Actions More reliable shipper; Frequent check with supplier /logistics; Rescheduling
Table 3. Consequence analysis results for the risk of crude arrival delay
Safety Stock
Yes No
Average Customer Satisfaction (%) Shipper Existing New 95 98 91 95
Average Profit ($, million) Shipper Existing New 38 93 27 83
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
43
A new approach for the design of multicomponent water/wastewater networks Débora C. Faria and Miguel J. Bagajewicz University of Oklahoma, 100E. Boyd, Norman – OK 73019, USA
Abstract Water allocation problems have nonlinearities and non-convexities due to bilinear terms. To address this issue we propose to discretize one of the variables of the bilinear terms. As a result an MILP model is generated, which provides a lower bound. To reduce the gap between this lower bound and the upper bound (a feasible solution found using the original NLP model), an interval elimination procedure is proposed. As a result, the feasible space shrinks after each iteration and the global optimum is identified. We illustrate the methodology for minimum water allocation problems. Keywords: water networks, multicoponent, bilinearities, discretization, lower bound.
1. Introduction The design of water/wastewater networks where water is reused and/or regenerated in processes plants is one important problem in industry as it leads to important water and cost savings. To accomplish this task for multicomponent systesm, mathematical programming is needed (Bagajewicz , 2000). The models contain a large number of bilinear, non-convex terms, which make the identification of a global optimum cumbersome. To overcome this difficulty, some authors have presented methodologies to find feasible solutions for these systems (Bagajewicz et al.,2000; Alva-Argaez et al., 1998,2007; Ullmer et al.,2005). With the exception of the work presented by Karuppiah and Grossmann (2006), no other present a methodology to find the global optimum solution. In this paper we present a new discretization methodology based on an interval elimination procedure that guarantees global optimality. We present the nonlinear model first, followed by a description of the discretization model and the solution procedure. Finally, an example is presented.
2. The Nonlinear Model Problem statement: Given a set of water using units, freshwater sources, wastewater sink and available regeneration processes with their limiting data, a globally optimum for the freshwater consumption is sought. The corresponding non-liner model to solve this water allocation problem (WAP) written in terms of contaminant mass load is: Water balance at the water-using units
¦ FWU w,u + ¦ FUU u*,u + ¦ FRU r ,u w
u*
=
r
¦ FUS u ,s + ¦ FUU u ,u* + ¦ FURu*,r s
u*
∀u
(1)
r
FWU, FUU, FRU, FRR and FUR are the freshwater to unit, unit to unit, regeneration unit to units, regeneration to regeneration and unit to regeneration flowrates.
D.C. Faria and M.J. Bagajewicz
44
Water balance at the regeneration processes
¦ FURu ,r + ¦ FRRr*,r = ¦ FRU r ,u + ¦ FRRr ,r* + ¦ FRRr ,u u
r*
u
r*
∀r
(2)
u
Contaminant balance at the water-using units
¦ (CWw,c * FWw,u ) + ¦ ZUU u*,u ,d + ¦ ZRU r ,u,d w
u*
+ ΔM u ,c
r
= ¦ ZUU u ,u*,d + ¦ ZUS u , s ,d + ¦ ZURu ,r ,d u*
s
(3)
∀u, c
r
CWw,c is the pollutant c concentration in freshwater. In turn, ZUU, ZRU, ZUS and ZUR are mass flows of contaminants between units, regeneration to units, units to disposal and units to regeneration units. Finally ΔM u ,c is the mass load of component c. Maximum inlet concentration at the water-using units
¦ (CW w,c * FUW w,u ) + ¦ ZUU u*,u ,c + ¦ ZRU r ,u ,c w
u*
r
· § ≤ Cinmax u ,c * ¨¨ ¦ FUW w,u + ¦ FUU u*,u + ¦ FRU r ,u ¸¸ u* r ¹ ©w
(4) ∀u , c
Maximum outlet concentration at the water-using units
¦ (CW w,c * FUW w,u ) + ¦ ZUU u*,u ,c + ¦ ZRU r ,u ,c + ΔM u ,c w
u*
r
· § ≤ Coutmax u ,c * ¨¨ ¦ FUU u ,u* + ¦ FUR u , r + ¦ FUU u ,u* + ¦ FUS u , s ¸¸ ∀u , c r u* s ¹ © u*
(5)
Cinmax and Coutmax are maximum inlet and outlet concentrations. Contaminant balance at the regeneration processes
ª º ZRrout ,c = « ¦ ZURu , r ,c + ¦ ZRRr *, r ,c » *(1 − XCRr ,c ) r* ¬u ¼ ª º + « ¦ ZRU r ,u ,c + ¦ ZRRr ,r *,c + ¦ ZRRr ,r *,c » * XCRr ,c r* r* ¬u ¼
(6)
∀r , c
Here XCRr ,c is a binary parameter that determines is a contaminant is removed or not. Capacity (CAP) of the regeneration processes CAPr = ¦ FURu ,r + ¦ FRRr *,r ∀r u
(7)
r*
Contaminant mass loads These constraints are written in a general form where i can be any water using unit or any regeneration process; and j can be a water using unit, regeneration process or sink.
ZIJ i, j ,c = FIJ i, j * Couti, j
∀i ∈ {U , R}, j ∈ {U , R, S}, c
(8)
A New Approach for the Design of Multicomponent Water/Wastewater Networks
45
Freshwater consumption – Objective function
Min¦¦ FWU w,u w
(9)
u
3. The Discrete Methodology 3.1. Model Discretization The proposed approach discretizes one variable (concentrations used here or flowrates) of the bilinear term generated at the splitting points. As a result, a mixed integer linear programming (MILP) model is generated. The discretized concentrations are now parameters ( DC d,c,u for the water using units; DCR d,c,r for regeneration processes). Eq. 8 (the only bilinear one) is substituted by the following “big M” constraints, that force the outlet concentrations to be in between two discrete concentrations. ZIJ i , j ,c − DC d ,c ,i * FIJ i , j ≥ DC d ,c ,i * Fmax * (XI i,c,d − 1) ∀i ∈ {U , R}, j ∈ {U , R, S }, c, d < dmax ZIJ i , j ,c − DCd +1,c,i * FIJ i , j ≤ DCdmax,c,i * Fmax * (1 - XIi,c,d ) ∀i ∈ {U , R}, j ∈ {U , R, S }, c, d < dmax
(10)
(11)
To guarantee that only one interval is picked, we write:
¦ XIi,c,d = 1 d
∀i ∈ {U , R} , c
(12)
Thus, the contaminant mass load of each stream is calculated through a relaxation between two discrete points. Finally, to ensure that there is no contaminant mass load when flowrate does not exist, we write: ZIJ i , j ,c ≤ DC dmax ,c ,i * FIJ i, j
∀i ∈ {U , R}, j ∈ {U , R, S }, c
(13)
The discretized model provides a lower bound (because it is relaxing one constraint), but most important, it also points to a set of intervals that might contain the optimum. In addition, a good upper bound can be obtained using the solution of this lower bound as a starting point of the original NLP problem.
Once a lower bound and an upper bound of the problem are found, one can evaluate the lower bound solution and determine which intervals might be part of an optimum solution. The ones that are proved not to be in the optimum solution are eliminated and the remained intervals of the discrete concentration parameters are discretized again. This is done as follows. 3.2. Interval Eliminations In each iteration, after a lower and an upper bound are found, we implement the following procedure for each discrete concentration: 1. The interval selected by the lower bound model is forbidden to be selected (this means the correspondent binary is fixed to zero) 2. The discrete model is then run again. Two possibilities exist:
D.C. Faria and M.J. Bagajewicz
46
a.
The solution is feasible (a solution between the current lower and upper bound exists). In this case, it is possible to have an optimum solution outside of the investigated interval. Thus, nothing is done. The solution is infeasible (there is no feasible solution between the current lower and upper bound outside of the investigated interval). Thus, the optimum solution needs is inside of the investigated interval. Thus, the region outside of the investigated interval is disregarded.
b.
4. Illustration of The Methodology We now illustrate the method a small example with two water-using units and two contaminants (Wang and Smith, 1994) (Table 1). For this example, two intervals (dmax=3) are used. Figure 1 shows how the discrete concentrations are being divided at the beginning (initialization step). Process 1 2
Table 1 – Limiting data of illustrative example Mass Load Cin,max Contaminant (Kg/h) (ppm) A 4 0 B 2 25 A 5.6 80 B 2.1 30
Cout,max (ppm) 100 75 240 90
Figure 1 – Illustrative example of the discrete approach - initialization.
In this case, the lower bound is 52.895 ton/h and the upper bound is 54 ton/h. All the selected intervals of the discrete concentration are in the second interval. When the lower bound model is re-run forbidding the selected intervals (intervals evaluation), it is found that none of the first intervals have the possibility of hosting the optimum solutions. Thus, the intervals between the first and second discrete points can be eliminated and the second intervals re-discretized.
Figure 2 – Illustrative example of the discrete approach – 1st iteration.
A New Approach for the Design of Multicomponent Water/Wastewater Networks
47
With this new intervals in the second iteration the lower and upper bound do not change (LB = 52.895 ton/h and UB = 54 ton/h), but the intervals are smaller, so a new elimination procedure can be conducted. The same procedure is repeated until the lower bound solution is equal (or has a tolerance difference) to the upper bound solution. In this example, using two intervals, is solved in 11 iterations and 11.6 seconds. Note that hen the elimination is not possible more intervals are used.
5. Examples The proposed method is applied to a refinery case presented by Koppol et al. (2003). This example has four key contaminants (salts, H2S, Organics and ammonia), six water using units, and three regeneration processes. The limiting data of the water using units are shown in the original paper. The solution when freshawater consumption is minimized, without allowing the addition of regeneration processes, is presented in Figure 3. A freshwater consumption of 119.332 ton/h was achieved. Only one iteration is needed and the solution is found in 0.81 seconds. The solution when regeneration processes are introduced (Reverse osmosis, which reduces salts to 20 ppm; API separator followed by ACA, which reduces organics to 50 ppm; and, Chevron wastewater treatment, which reduces H2S to 5 ppm and ammonia to 30 ppm) has a freshwater consumption of 33.571 ton/h. Only one iteration is needed to find the solution in 2 seconds. However, the found solution present several regeneration recycles and very small flowrates. This is an undesirable situation for the practical point of view. To overcome this issue, we added binary variables to control a minimum allowed flowrate if the connection exits and to forbid recycles as well. The new solution (also 33.517 ton/h) is found in two iterations (34 seconds). The flowsheet obtained is not shown for space reasons.
Figure 3– Optimum for Multicomponent Example. No regeneration
Further, we no longer consider the regeneration processes with fixed outlet concentrations of the key contaminants. Instead, we evaluate what would be these concentrations if we want minimize the need for regenerations at the found freshwater consumption (33.571 ton/h). To translate this goal to a mathematical form, we use the total removed contaminant mass load (that is the combination between flowrate and concentration reduction) as the objective function. Now, the outlet concentrations of the keys contaminants in the regeneration processes can have any value higher than the ones previously presented. The optimum solution found after 2 iterations (66 Seconds) shows the regeneration processes having the following features: Reverse osmosis needs to reduce salts to 85 ppm instead 20 ppm originally proposed. The API separator
D.C. Faria and M.J. Bagajewicz
48
followed by ACA need to reduce organics to 50 ppm as before. Finaly, the Chevron wastewater treatment should keep the 5 ppm reductions for H2S, but can operate to reduce ammonia to 120 ppm instead 30ppm. The suggested network is presented in Figure 4.
Figure 4– Optimum for Multicomponent Example. With Regeneration
6. Conclusions The suggested approach has showed good results on the minimum water allocation problems. The methodology also allows handling the outlet concentration of the key contaminants of the regeneration processes as a variable. This arises to be important when one wants to determine optimum contaminats reduction without define the regeneration processes beforehand. As future work, the methodology will be extended to the optimization of WAP using other objective function.
References M. Bagajewicz, 2000, A review of recent design procedures for water networks in refineries and process plants, Computers and Chemical Engineering, 24, 2093-2113. M. Bagajewicz, M. Rivas and M. Savelski, 2000, A robust method to obtain optimal and suboptimal design and retrofit solutions of water utilization systems with multiple contaminants in process plants, Computers and Chemical Engineering, 24, 1461-1466. A.A. Alva-Argaez, C. Kokossis and R. Smith, 1998, Wastewater minimization of industrial system using an integrated approach, Computers and Chemical Engineering, 22, S741-S744. A.A. Alva-Argaez, C. Kokossis and R. Smith, 2007, A conceptual decomposition of MINLP models for the design of water-using systems, Int. J. of Env. and Pollution, 29(1-3), 177-205. C. Ullmer, N. Kunde, A. Lassahn, G. Gruhn and K. Schulz, 2005, WADO: water design optimization – methodology and software for the systhesis of process water systems, Journal of Cleaner Production, 13, 485-494. R.Karuppiah and I.E. Grassmann, 2006, Global optimization for the systhesis of integrated water systems in chemical processes, Computers and Chemical Engineering, 30,650-673. Y.P. Wang and R. Smith, 1994, Wastewater Minimization, Chem. Eng. Science, 49(7), 981-1006. A.P.R. Koppol, M.J. Bagajewicz, B.J. Dericks and M.J. Savelski, 2003, On zero water discharge solutions in the process industry, Advances in Environmental Research, 8, 151-171.
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
49
Effect of catalytic reactor design on plantwide control strategy: Application to VAM plant Costin S. Bildea1 and Alexandre C. Dimian2 1
University “POLITEHNICA” of Bucharest, Polizu 1, Bucharest, Romania University of Amsterdam, Nieuwe Achtergracht 166, Amsterdam, The Netherlands
2
Abstract The paper demonstrates that the kinetic behaviour of a catalyst is a key element in developing a plantwide control strategy. The “inverse problem” is also important: design a catalyst whose kinetic behaviour fulfils at best the performance criteria of the plant. So far, these problems have not been systematically investigated. The methodological tool is based on the bifurcation analysis of the structure Reactor / Separation / Recycle. This analysis allows finding regions in the space of design parameters where performance criteria are met and stability is guaranteed. The catalytic chemical reactor must be a flexible unit. The recycling strategy is determined by the kinetic effect of each reactant, as well as by the sensitivity of the elementary reaction steps to concentration and temperature. When selectivity and catalyst properties require low per-pass conversion, manipulating the reactor temperature profile is an effective means for steering the plant between different operating points. Keywords: design, plantwide control, catalytic reactors, vinyl acetate
1. Introduction Controlling the inventory of reactants in plants with recycles can be performed in two ways [1]. The first one is evaluating the inventory of each reactant and controlling it by feedback, using the corresponding fresh feed as manipulated variable. A practical way is to fix the flow rates of reactants at reactor inlet. Production rate changes can be achieved a) by modifying the flow rates of reactants, which works when the process is designed for large conversion and b) by changing the reactor operation parameters, which is recommended at low values of conversion. The second approach is fixing the fresh feed rate of reactants and using the self-regulation property of the mass balance [2]. This strategy offers a direct way of changing the production rate. However, it can be applied only when the per-pass conversion of the limiting reactant has a high value. Previous studies [3] highlighted the interaction between reactor design and the control of plants with recycles and considered the generic Reactor / Separation / Recycle system as fundamental structure for developing plantwide control strategies. In the present paper, we consider the design and control of a process involving a complex LHHW catalytic reaction scheme. The Vinyl Acetate monomer (VAM) process has been proposed as benchmark for developing a plantwide control procedure [4], and received the attention of several studies [5-7]. However, our evaluation of these works indicates that the control strategy suffers of high sensitivity since the kinetics of the chemical reaction was implemented on a pre-determined reactor and plant design. Our approach considers the kinetics of the catalytic process as the starting point in designing the plant with recycles, as well as in developing the plantwide control strategy.
50
C.S. Bildea and A.C. Dimian
2. Process design The manufacturing of vinyl acetate by the oxy-acetylation of ethylene is described by the following gas-phase catalytic reaction: C2H4 + CH3COOH +0.5O2 ĺ C2H3OOCCH3 + H2O
ΔrH = -176.2 kJ/mol
A highly undesired secondary reaction is combustion of ethylene to CO2, which lowers the yield and complicates the removal of the reaction heat: ΔrH = -1322.8 kJ/mol
C2H4 + 3O2 ĺ 2CO2 + 2H2O
The catalyst plays a crucial role in the technology. A typical modern catalyst consists of 0.15-1.5 wt% Pd, 0.2-1.5 wt% Au, 4-10 wt% KOAc on silica spherical particles of 5 mm [8]. The very fast reaction takes place inside a thin layer (egg-shell catalyst). Preferred conditions are temperatures around 150 to 160 °C and pressures 8 to 10 bar. Hot spots above 200 °C lead to permanent catalyst deactivation. The excess of ethylene to acetic acid is 2:1 to 3:1. Because of explosion danger, the oxygen concentration in the reaction mixture should be kept below 8%. Small amount of water in the initial mixture are necessary for catalyst activation. The dilution of the reaction mixture with inert gas is necessary because of high exothermic effect. Accordingly, the reactor is designed at low values of the per-pass conversions, namely 15 – 35% for the acetic acid and 8-10% for ethylene. The above elements formulate hard constraints both for design and for plantwide control. Analyzing the mechanism of the catalytic reaction allows the identification of the major factors that affect the reactor design. The reaction kinetics is not sensitive to the concentration of the acetic acid, but the presence of some water is necessary to activate the catalyst. On the contrary, ethylene and oxygen are involved in kinetics through a complex adsorption/surface reaction mechanism. The catalyst manifests high activity and selectivity. The power-law kinetics involves only ethylene and oxygen [8]: α1 rVA = k1 pC p β1 H O 2
4
2
where Į1 is 0.35 - 0.38 and ȕ1 0.18 - 0.21. The reaction constant is given by k1 = A1 exp(− E1 / RT ) in which the energy of activation depends on the Pd content, for example 39 kJ/mol for Pd 1% and 17.3 kJ/mol for Pd 5%. A similar kinetic expression describes the secondary combustion reaction, but with reaction orders very different compared to the main reaction: α2 rCO2 = k 2 pC pβ2 H O 2
4
2
Table 1. Kinetic parameters for vinyl acetate synthesis over a Pd/Au/SiO2 catalyst [9,10]
Reactions
Power-law kinetics C2H4 O2 C2H4+CH3COOH+0.5O2 0.36 0.20 C2H4 +3O2 ĺ 2CO2 + 2H2O -0.31 0.82 * reaction rate in mol/litre-catalyst/sec.
Kinetic constants E (J/mol) 15000 21000
A1 2.65E-04 7.50E-04
A2 7.95E-05 2.25E-04
Effect of Catalytic Reactor Design on Plantwide Control Strategy
51
R-GAS HX R-IN SEP ETHENE MIX1
PFR
SEP
OXYGEN MIXER
ACETIC R-OUT R-ACETIC
Figure 1 Design of the reactor for vinyl acetate manufacturing in a recycle system
Figure 1 presents the Reactor / Separation / Recycle structure used for performing reactor design and bifurcation analysis. Because of incomplete conversion, both ethylene and acetic acid are recycled. The recycle policy should maintain an ethylene/acetic acid ratio of 3 : 1, as well as oxygen concentration at reactor inlet bellow 8 vol%. The choice of gaseous inert is a key design decision. Some reports [4-7] consider ethane (impurity in the fresh feed), but this solution is not adopted here. Because CO2 is produced by reaction in large amount, its use as inert in a concentration of 10-30 % vol is the most economical [8]. However, the presence of CO has to be prevented since this is a catalyst poison.
3. Plantwide control The main goals of the plantwide control system are to ensure safe operation, desired production rate and product quality, and to optimize the efficiency of using the material and energetic resources. Figure 2 presents the control structure around the chemical reactor. Safety is essential. Therefore, the oxygen is added under concentration control, in a mixing chamber placed behind concrete walls. Secondly, the cooling should avoid reaction runaway. Several temperature measurements are placed along the reactor bed and the highest value is selected as the process variable. The manipulated variable of the control loop is the steam generator pressure, which directly influences the coolant temperature. The water level in the steam generator is controlled by the water makeup. Note that using a simple feedback loop may not work. When the steam rate increases, the correct action is to add more water as makeup. However, the pressure simultaneously decreases. The lower pressure means that, initially, the steam bubbles will occupy a larger volume, and the liquid level will increase. A feedback levelcontroller will wrongly decrease the water make-up rate. Therefore, the steam rate is measured and the required water makeup is calculated. This feedforward action is combined with the feedback provided by the level controller. As recommended in previous works, the inventory of reactants in the plant is maintained by fixing the reactor-inlet flows. Acetic acid is taken with constant rate from a storage tank, and the fresh feed is added on level control. The gas rate going to the evaporator is a good estimation of the ethylene inventory. Therefore, this flow is kept constant by adjusting the fresh ethylene feed. The fresh oxygen rate is manipulated by a concentration control loop, as previously explained.
52
C.S. Bildea and A.C. Dimian
TC Steam
O2
F FF
C2H4 recycled
+
PC
TC
CC
+
LC
T
Reactor
T
HS
FC
T
Steam generator
C2H4 fresh
FC AcOH recycled
PC
TC
Evaporator
AcOH fresh
VAc crude to separation
FC
LC AcOH storage
FC AcOH to separation
Figure 2. Control structure for fresh feeds and around chemical reactor CO2 removal
CO2
C2H4 recycled
FC CC
AcOH
PC FC AcOH
C-4 C-1 LC
PC PC
TC
3Flash
C-1
Decanter
LC TC
FC
LC C-5
LC PC
TC LC
PC LC LC
VAc
C-3
T-1 VAc crude from reactor
PC
LC
TC
FC C-6 TC Water
Water AcOH to storage
Figure 3. Control structure of the separation section
Effect of Catalytic Reactor Design on Plantwide Control Strategy
53
The separation section takes advantage from the heterogeneous azeotrope formed by vinyl acetate and water. Significant energy saving, up to 70 %, can be obtained by making use of a dehydration gas pre-treatment. In this way the exothermic reaction can cover up to 90 % from the energy requirements of the distillations. The control of the separation section is presented in Figure 3. Because the distillate streams are recycled within the separation section, their composition is less important. Therefore, columns C-3, C-5 and C-6 are operated at constant reflux, while boilup rates are used to control some temperatures in the lower sections of the column. For the absorption columns C-1 and C-4, the flow rates of the absorbent (acetic acid) are kept constant. The concentration of CO2 in the recycle stream is controlled by changing the amount of gas sent to the CO2 removal unit. Temperature and pressure control loops are standard. In Reactor / Separation / Recycle systems, two strategies can be employed to achieve production rate changes. The first one, by manipulating the reactor inlet flows, does not work here: the acetic acid does not influence the reaction rate, the per-pass conversion of ethylene is very low (10%), while the reactor-inlet oxygen concentration is restricted by the safety concerns. Therefore, the second strategy manipulating the reaction conditions is applied.
4. Results Figure 4 shows results of simulation in Aspen DynamicsTM, for the following scenario: the plant is operated at the nominal steady state for 1 hour. Then, the coolant temperature is increased from 413 K to 425 K and simulation is continued for 2 hours. The maximum temperature inside the reactor increases from 455 K (at 0.8 m from reactor inlet) to 469 K (at 1.2 m from inlet). The higher temperature results in higher reaction rates, less reactants being recycled. The gas recycle is the fastest, and the ethylene feed is the first to be adjusted. Then, more oxygen is added by the concentration controller. The dynamics of the liquid recycle is slower and it takes about 0.5 hours until the acetic acid feed reaches the new stationary value. The vinyl acetate production rate increases from 154 kmol/h to 171 kmol/h. At time t = 3 hours, the coolant temperature is reduced to 400 K, and the simulation is run for another 2 hours. The maximum reactor temperature drops to 452 K (near reactor inlet) and the production rate is decreased to 134 kmol/h. During the entire simulation, the oxygen concentration stays very close to the setpoint of 6%. Moreover, the concentration of the vinyl acetate product is above the 99.98% specification. Similarly to our approach, Luyben and co-workers [4, 5] proposed to fix the reactorinlet flow rate of acetic acid and to use the fresh feed to control the inventory in the bottom of the acetic-acid distillation column. The two control strategies are equivalent (a)
(b)
Ethylene
180 160
Acetic acid 140 120
Oxygen
100 80
180
Water
160
Vinyl acetate
40 30
140 20
120
CO2 10
100 80
0
1
2
3
time / [h]
4
5
Flow rate / [kmol/h]
50
200
Flow rate / [kmol/h]
Flow rate / [kmol/h]
200
0 0
1
2
3
4
5
time / [h]
Figure 4. Dynamic simulation results as flow rates of a) fresh reactants and b) products
54
C.S. Bildea and A.C. Dimian
from a steady state point of view. However, Olsen et al. [6] showed that Luyben’s structure has an unfavourable dynamics due to the large lag between the manipulated and controlled variables. The other important control loops in [5] paired the oxygen feed with oxygen concentration, and ethylene feed with pressure in the system. The production rate was also manipulated by the setpoint of reactor temperature controller. Chen and McAvoy [7] applied a methodology where several control structures, generated on heuristic grounds, were evaluated using a linear dynamic model and optimal control. Their results also indicate that fixing the reactor-inlet flows is the recommended strategy.
4. Conclusion The case study of vinyl acetate synthesis emphasises the benefits of an integrated process design and plantwide control strategy based on the analysis of the Reactor / Separation / Recycles structure. The core is the chemical reactor, whose behaviour in recycle depends on the kinetics and selectivity of the catalyst, as well as on safety and technological constraints. Moreover, the recycle policy depends on the reaction mechanism of the catalytic reaction. The approach in steady state reactor design finds a dynamic equivalent in the plantwide control strategy. Because of low per pass conversion of both ethylene and acetic acid, manipulating the flow rate of reactant at reactor inlet has little power in adjusting the production rate. The reaction temperature profile becomes the main variables for changing the reaction rate and hence ensuring the flexibility in production. The inventory of reactants is adapted accordingly by fresh reactant make-up directly in recycles. Productivity higher than 1000 kg VAM/m3-catalyst/h can be achieved working at higher temperature and shorter residence time, as well as with good temperature control. This approach can be seen as generic for low per pass reactions.
References [1] Bildea C.S., Dimian A.C., Fixing flow rates in recycle systems: Luyben’s rule revisited. Industrial and Engineering Chemistry Research. 2003; 42: 4578. [2] Downs J., Distillation Control in a Plantwide Control Environment. In Practical Distillation Control; Luyben W., Ed.; van Nostrand Rheinhold: New York: 1992. [3] Bildea C.S., Dimian A.C., Cruz S.C., Iedema P.D., Design of tubular reactors in recycle systems, Computers & Chemical Engineering 28 (1-2): 63-72, 2004. [4] Luyben M.L. and Tyreus B.D., An industrial design / control study for the vinyl acetate monomer process, Comp. Chem. Eng., 1998, 22, 867 [5] Luyben M.L., Tyreus B.D., Luyben W.L. , Plantwide control design procedure, AIChE Journal, 43 (12), 3161-3174, 1997 [6] Olsen, D., Svrcek, W., Young, B., Plantwide control study of a vinyl acetate monomere process design, Chem. Eng. Comm, 192 (10), 1243-1257, 2005 [7] Chen, R. and McAvoy, T., Plantwide control system design: methodology and application to a vinyl acetate process, Ind. Eng. Chem. Res., 42, 4753 – 4771, 2003 [8] Renneke, R. et al., Development of a high performance catalyst for the production of vinyl acetate monomer, Topics in Catalysis, 38(4), 279-287, 2006 [9] Han, Y. F., Wang J. H., Kumar, D., Yan, Z., Goodman D. W., A kinetic study of vinyl acetate synthesis over Pd-based catalysts, J. Catalysis, 232, 467, 2005 [10] Han, Y. F., Kumar, D., Sivadinarayana C., Goodman, D. W., Kinetics of ethylene combustion in the synthesis of vinyl acetate, J. Catalysis, 224, 60, 2004
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
55
Model of the Product Properties for Process Synthesis Peter M.M. Bongers Unilever Food and Health Research Institute, Olivier van Noortlaan 130, 3130 AC,Vlaardingen, The Netherlands
Abstract In the hierarchical decomposition method, or, process synthesis one only looks at the input-output structure of the process at the first level. In subsequent levels more detail is added, finally ending with the entire flowsheet. Design decisions are made by using heuristics and models. The amount of detail in the models depend on the level at which the models are applied. The models are used to describe how processes behave in terms of bulk properties. However, during the product-process design, the product is judged on sensory attributes. The models need extension to sensory attributes (the property model). The sensory attributes depend on physical attributes, as can be predicted by the models, and ingredients. This dependency range from constant to highly non-linear. This paper describes how the problem of determining the lowest complexity model for the property function can be formulated and solved for an ice cream example. The estimated property function model provides a good estimation of the sensory attributes. In combination with a process function model we are able to related ingredients and process conditions with sensory attributes. Keywords: product-process design, sensory models, neural networks.
1. Background Process synthesis is regarded as the invention of conceptual process designs. These designs are expected to be reliable, economic attractive and generated within a limited time frame. Thus, process synthesis is the generation of alternatives and choices to reduce the number of alternatives in all conceptual process engineering steps within the innovation process. As the number of possible alternatives to perform a desired task can be easily about 104 to 109, methodologies are required to reduce this explosive number to manageable levels. The development of those methodologies to aid engineers to better design a process is not a novel challenge. In the chemical industry, first academic publications and successful industrial implementations related to process synthesis methodologies are well established, see Douglas (1988), Sirola (1996). In the hierarchical decomposition method developed by Douglas (1988) one only looks at the input-output structure of the process at the first level. In subsequent levels more detail is added, finally ending with the entire flowsheet. Design decisions are made by using heuristics and models. The amount of detail in the models depend on the level at which the models are applied. Historically, process models are used to describe how processes behave in terms of bulk properties such as flow, temperature, pressure, concentration, etc. However, our consumer goods, such as soups, mayonnaise or ice cream, are not bought on their bulk properties, but on how consumers perceive the products. During the product-process
P.M.M. Bongers
56
design stages, the product is judged on measured sensory attributes, such as mouth feel, bite, creamy texture, etc. Hence, there is a need to extend process models with sensory attributes. Figure 1 shows how the process model can be extended into a model chain from raw materials, equipment and operational conditions through sensory attributes to consumer liking. OPERATIONAL CONDITIONSL
EXTERNAL DISTURBANCES
PROCESS FUNCTION
CONSUMER LIKING
SENSORY ATTRIBUTES
PHYSICAL ATTRIBUTES
RAW MATERIALS
PROPERTY FUNCTION
PRESSURE TEMPERATURE AIRCRYSTAL SIZES
CONSUMER FUNCTION
SMOOTHNESS ICINESS CREAMINESS
Figure 1 Process, property and consumer function for ice cream
Products are bought by the consumers based on their perceived benefits. A product design should therefore aim at satisfying specific consumer benefits. To be more precise, one needs to be able to relate the ingredients, equipment and processing conditions to the consumer benefits. In the design phase there is the need to evaluate concepts without ‘large’ and expensive consumer trials. For this purpose sensory attributes measured by a trained QDA panel, are used to measure consumer benefits. Previously reported work describes dynamic process model for ice cream freezers (Bongers, 2006) and extruders (Bongers and Campbell, 2008) to relate operating conditions, equipment geometry with physical attributes, such as extrusion temperature. This leaves the property function as the unknown to be found. As no fundamental relations are currently available on which to develop a model, we have to revert to experimental relations. Then, for analysis purposes, the property function should be determined from physical attributes to sensory attributes. For synthesis purposes, the property function should be determined from sensory attributes back to physical attributes. In the past various attempts have been made to determine the property functions for all kinds of products. Almost all of these use linear regression techniques (see for example Powers and Moskovitz, 1974) to deal with the measured data. By the fact that most of the property function is highly non-linear, these techniques fail. In addition to the linear regression, a linear regression on non-linear functions of the attributes can be used. The drawback is that the non-linear functions of the attributes have to be defined by the user. At present this have to be done by trail-and-error and turns out to be a very tedious. Based on the above observations, a successful approach to determine the property function has to be based on a generic non-linear function description. One such approach is to use neural networks as a non-linear describing function.
Model of the Product Properties for Process Synthesis
57
2. Data manipulation 2.1. Data set The dataset of 30 experiments contains: • 1 equipment type (usage of a freezer or a freezer and single screw extruder) . This is a nominal parameter (-1 for only freezer, +1 for both freezer and single screw extruder) • 1 process parameter (exit temperature). This is a continuous parameter between -6oC and -13oC with a resolution of 0.1oC • 1 ingredients parameter (fat level). This is a continuous parameter between 8% and 12% with a resolution of 1% • 25 sensory properties of the icecream. These are ordered intervals between 0 and 10 with a resolution of 0.1 The property model has 3 independent inputs and 25 outputs. This multi-input-multioutput system can also be described as a multiple (decoupled) system of multi-inputssingle-output (Ljung, 1999). 2.1.1. Data analysis Basic statistical analysis on the sensory properties (variance, kurtosis and min-max) showed that 4 sensory parameters where not influenced by the inputs and hence excluded from the analysis (later on, they will be indicated as constant). Correlation analysis between the sensory attributes showed 3 sensory attributes having a correlation coefficient of 0.95 or higher with each other. For this cluster only one of the sensory attributes is taken forward in the analysis. As a result, only 17 sensory attributes will be analysed.
3. Property model The property model should be as simple as possible, but not too simplistic That means that for each of the senory parameters we need to determine the ‘simplest’ relation. On the data set two types of describing functions will be determined: a linear regression or neural network to describe the non-linearities. Which of the models to use will be determined by trading-off the prediction error against the number of parameters used, i.e. the AIC (Akaike, 1974). 3.1.1. Linear regression Multiple linear regression can be applied to determine a linear function having the following form: Sensory attribute(n) = p1 ⋅ Fatlevel + p2 ⋅ Temperature + p3 ⋅ FreezerType + p4 3.1.2. Neural network A neural network consists of a number of nodes, called neurons, connected to the inputs and outputs, having the following structure for this application.
P.M.M. Bongers
58
fat level extrusion temperature
sensory attribute
freezer type
The neurons weight all inputs and provide an output via the activation function. The complexity of the neural networks used will be determined by the number of nodes in the hidden layer (2,3,5 or 7). The activation applied in this application is a hyperbolic tangent function. In mathematical terms, the output of neuron j is defined by: output of neuron j With: yj n wiu i input from neuron i (or input i), weighted with wi y = tanh( Σ w u ) i i
j
i=1
The weightings wi in the neural network are determined by an optimisation algorithm using the error between the measured outputs and the outputs predicted by the neural network. The work of Rumelhart et.al. (1985) is recommended for more details about this type of neural networks and examples. In theory one hidden layer neural network is sufficient to describe all input/output relations. More hidden layers can be introduced to reduce the number of neurons compared to the number of neurons in a single layer neural network. The same argument holds for the type of activation function and the choice of the optimisation algorithm. However, the emphasis of this work is not directed on the selection of the best neural network structure, activation function and training protocol, but to the application of neural networks as a means of non-linear function fit.
4. Model parameter estimation 4.1. Training set In order to be able to perform validation of the model, not all 30 cases can be used to determine the model. Also care must be taken to which cases will be used for validation and which cases for determination of the model. Because it is easy with an experimental model to fit noise in the data, a ‘large’ validation set has been chosen (5 cases in the validation set and 25 cases remaining in the set to determine the model (=training set) ). To avoid coincidental results, the whole procedure is repeated 5 times with different training sets and validation sets, where the cases in the validation set have been selected randomly. 4.2. Error Criterion The next step is to determine the error criterion on which to decide the predictive value of the model and to decide which prediction type to use for which sensory attribute. For each of the sensory attribute, the root mean square of the prediction error, ε, will be used to evaluate the properties of the prediction model type. With: yˆ predicted output for case i N
ε :=
1 N −1
¦
i =1
( yi − yˆ i ) 2
i
yi N
measure output for case i number of cases
Model of the Product Properties for Process Synthesis
59
4.3. Results The whole analysis (including the penalty for over parametrising) has been implemented in Matlab (Mathworks 2007) using the public domain neural network tool of Norgaard (1995). The following predictor type, and mean square errors for the sensory attributes have been obtained. predictor type
Sensory attribute No Name . 1 Firmness on spooning
0.10
Neural (3*)
predictor type
Sensory attribute No Name . 14 powdery
0.02
Constant
2
Initial firmness
0.11
Neural (2)
15 vanilla pods
0.06
Neural (3)
3
Chewiness
0.05
Neural (3)
16 flavour melt
0.05
4
Coldness
0.18
Linear
17 creamy flavour 0.44
Correlated with 10 Linear
5
Crumbliness
0.08
Neural (2)
18 sweetness
0.03
Constant
6
inital smoothness
0.08
Neural (2)
19 sharp/yogurt
0.02
Constant
7
I/C quantity in mouth
0.11
Neural (7)
20 fruity
0.12
Neural (2)
8
I/C/ size in mouth
0.11
Neural (2)
21 vanilla flavour 0.07
Neural (2)
9
Rate of melt
0.17
Linear
22 boiled milk
0.14
Linear
10 Creamy texture
0.12
Neural (5)
23 other flavour
0.04
Constant
11 Thickness
0.14
12 final smoothness
0.15
Correlated with 10 Neural (2)
24 unexpected 0.15 flavour 25 final mouth- 0.16 coating
13 grittiness
0.07
Neural (2) sum of errors
Linear Neural (2)
2.78
As an example for the validation, one of the validation cases is shown below. It can be seen that almost all sensory attributes are predicted within the accuracy of the data. Sensory model validation (case 3) firmness on spooning initial firmness chewiness coldness crumbliness inital smoothness I/C quantity in mouth I/C/ size in mouth rate of melt creamy texture thickness final smoothness grittiness powdery vanilla pods creamy flavour sweetness sharp/yogurt fruity vanilla flavour boiled milk other flavour unexpected flavour final mouth-coating mouthdry/astringent
measured predicted 0
*
2
4 6 8 sensory score (st. dev.= 0.1242)
Denotes the number of neurons in the hidden layer.
10
60
P.M.M. Bongers
5. Conclusions and future work The process models predicting bulk physical attributes have been augmented by a properties model describing the relations between the physical attribues and the sensory attributes. For each of the sensory attribute the lowest complexity model has been determined. Instead of an trial-and-error approach, a neural network with one hidden layer has been used as a generic non-linear function. The complexity of the neural network can thus be seen as the number of nodes in the hidden layer. The performance of the property function model obtained by the above described procedure has verified with the validation set and the property function model provides a good estimation of the sensory attributes.
References Akaike, H (1974). A new look at the statistical model identification. IEEE Transactions on Automatic Control 19 (6): 716–723. Bongers, P.M.M. (2006) A Heat Transfer model of a scraped surface heat exchanger for Ice Cream, Proc. 16th European Symposium on Computer Aided Process Engineering Bongers, P.M.M., I. Campbell (2008) A Heat Transfer Model of an Ice Cream Single Screw Extruder, Proc. 18th European Symposium on Computer Aided Process Engineering Bruin, S. (2004) Lecture notes ‘Product design’, Technical University of Eindhoven, The Netherlands Douglas, J.M. (1988). Conceptual design of chemical process, McGraw Hill, New York. Lennart, L. (1999). System Identification — Theory For the User, 2nd ed, PTR Prentice Hall, Upper Saddle River, N.J. Matlab (2007). User guide, Norgaard, M. (1995). Neural Network based system identification toolbox, for use with MATLAB, Report 95-E-773, Institute of Automation, Technical University of Denmark. Powers, J.J., H.R. Moskowitz (1974). Correlating sensory objective measurements; new methods for answering old problems, Amer. Soc. Testing Materials, Philadelphia. Rumelhart, D.E., G.E. Hinton, R.J. Williams (1986). Learning internal representation by error propagation, Parallel Distributed Processing, MIT Press. Siirola, J.J. (1996). Industrial applications of chemical process synthesis, Advances in Chemical Engineering, 23, J.L. Anderson (Ed.), 1996 Wildmoser, J. (2004), Impact of Low Temperature Extrusion Processing on Disperse Microstructure in Ice Cream Systems, Dissertation ETH no. 15455.
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
61
Performance Analysis and Optimization of Enantioselective Fractional Extraction with a Multistage Equilibrium Model André B. de Haan,a Norbert J.M. Kuipers, b Maartje Steensmac a
Eindhoven University of Technology, Faculty Chemical Engineering and Chemistry, PO Box 513, 5600 MD Eindhoven, The Netherlands b University of Twente, PO Box 217, 7500 AE Enschede, The Netherlands c Akzo Nobel Salt bv,PO Box 10, 7400 AA Deventer, The Netherlands
Abstract Chiral compounds are important products in the pharmaceutical and fine chemical industry. Fractional reactive extraction (FREX) is a promising enantiomer separation method but knowledge on translation into industrial practice is very scarce. In this work the combinations of process and product parameters that generate a specified yield and product purity have been evaluated using a multi-stage equilibrium model. The simulations demonstrated that the influence of changes in process parameters (pH, T, concentrations) can be predicted with the multistage equilibrium model for reactive extraction of phenylglycinol and phenylethylamine. A higher pH, lower temperature, higher concentrations and a higher excess of extractant all result in higher purities. Implementation of reflux results in somewhat higher product purities (or less stages), but a significant loss in capacity. Recovery of product and extractant by backextraction should be carried out by pH shift, preferably with CO2 to prevent salt formation. For separating racemic mixtures with a minimal single stage selectivity of 1.5 a multiproduct extractor should contain 50 stages, evenly distributed over the wash and strip section. Keywords: Multistage modeling, Fractional extraction, Enantiomer
1. Introduction In the pharmaceutical and fine chemical industry, chiral compounds play an important role as intermediates and end products. Most of these products are produced in a multiproduct environment. Fractional reactive extraction (FREX) is a promising alternative to existing enantiomer separation methods. In this technique an enantioselective extractant is employed as separating agent in the fractional extraction scheme that employs a wash stream to remove the less strongly bonded enantiomer from the extract. [1]. So far, (fractional) reactive extraction has been studied by a number of authors for chiral separation of amino acids [2-7] and occasionally for other enantiomer classes [812]. However, knowledge on translation of lab-scale FREX into industrial practice or into a general multi-product design is very scarce. In our previous work, we have established an azophenolic crown ether based solvent system as a versatile, i.e. multiproduct, and highly selective extractant for various amines and amino alcohols [13]. The single-stage extraction equilibria including back-extraction were investigated [14] as well as the kinetics of the complexation reactions [15].
62
A.B. de Haan et al.
As a step towards industrial implementation, this work aims to elucidate which combinations of process and product parameters generate a specified yield and product purity in a multistage extractor. To reach this goal, a multi-stage equilibrium model has been constructed based on a single stage description comprising the chemical and physical equilibria of the system. Simulations have been performed to study the effect of process parameters and the consequences for the design of a multi-product extractor. EXTRACT R, C
WASH
aq
org pK
HR+ HS+
pK
H+ + R H+ + S
P
P
R+C S+C
KR
KS
1
RC
FEED R,S
wash section
2
3
SC
strip section
4
RAFFINATE S
SOLVENT C
Figure 1: (left) Single extraction stage: main equilibria between enantiomers ‘R’ and ‘S’ and enantioselective extractant ‘C’; (right) fractional extraction scheme with wash stream (KR > KS).
2. Multi-Stage Equilibrium Model For the previously established azophenolic crown ether extractant a predictive single stage equilibrium model (Figure 1) was constructed and validated [14]. The extent of extraction is characterised by the distribution ratios DR and DS for each enantiomer:
DR =
[ R ]org ,allforms [ R ]aq ,allforms
=
[ R ]org + [ RC ]org +
[ R ]aq + [ HR ]aq
and
DS =
[ S ]org ,allforms [ S ]aq ,allforms
(1)
The operational selectivity αop is defined by the ratio of these distribution ratios. Its upper limit is the intrinsic selectivity αint, which is the ratio of the complexation constants:
α op =
DR DS
(assuming DR > DS)
and
α int =
KR KS
(2)
In fractional extraction equipment, additional degrees of freedom are the solvent-to-feed ratio (S/F), the wash flow (as W/F or W/S), the number of stages and the location of the feed stage. As measure for optical purity of the raffinate and the extract, the enantiomeric excess (e.e.) is used [16]. The e.e. and yield of the enatiomer R in the extract are given as:
e.e. =
[ R] − [ S ] [ R] + [ S ]
yield R , EXTRACT =
total R extract total R feed
[mol ] (3) [mol ]
The concentrations of extractant and enantiomer are characterised by the ‘concentration level’ and the ‘extractant excess’ defined as:
Performance Analysis and Optimization of Enantioselective Fractional Extraction with a Multistage Equilibrium Model
excess extractant =
63
S ⋅ [C ] solvent F ⋅ [rac] feed
(4)
In the multistage equilibrium model all single stages are connected countercurrently (Figure 1). The multistage model is implemented in gPROMS (PSE Ltd., London, UK). All equilibrium conditions and mass balances are solved simultaneously. To reduce the simulation time, the influence of process conditions is studied at a fixed number of stages of 4 (2 in each section) with the specification to ‘reach equal e.e. in each stream’. This specification is used to ensure that a ‘symmetrical’ separation (equal purity in extract and raffinate) is obtained. In each simulation the wash flow (expressed as W/S or W/F) is adapted to reach the point where the e.e. in the raffinate equals the e.e. in the extract.
3. Results and discussion 3.1. Influence of process parameters Figure 2 and 3 show that for both phenylglycinol (PG) and phenylethylamine (PEA) an increase in extractant excess, an increase in pH, a decrease in temperature or a higher overall concentration level all result in an ‘equal e.e.’ point at a higher e.e. in both streams and at a higher W/F ratio. By each of these changes, the extent of complexation between crown ether and both enantiomers increases (see Figure 1). If the wash stream is not adapted, the yield in the extract increases, but e.e. decreases. Vice-versa, the purity in the raffinate increases, but the yield decreases. If now the wash stream is increased as well, more enantiomer is washed back from the extract, and equal yield and purity are obtained in extract and raffinate. 3.2. Influence of number of stages The influence of pH and concentration level on the W/F ratio and required number of stages that yield a product purity of 0.98 e.e. are presented in Figure 4. It can be seen that lower pH or lower extractant excess results in a lower e.e. in four stages and thus also in a larger stage requirement to reach e.e. = 0.98. 1
PG
20
0.8
30
W/F
0.4
e.e.
W/F
0.6 PEA
0.8
PG
15
PEA
20
1
0.6
PEA
10 PEA
10
PG
0 0
10
20
T [°C]
30
0.2
5
0
0
0.2
PG
7.5
0.4
e.e.
40
8.5
9.5
0 10.5
pH
Figure 2: Influence of temperature (left) and pH (right) on ‘equal e.e.’ points (W/F, e.e.) for separation of PEA (pH=9.4) or PG (pH=9.1); S/F=2 with [rac] =0.01 M and [C]=0.01 M.
64
A.B. de Haan et al. 20
0.9
40
1
30 [C]= 0.01
10 0.8
S/F=1
5
W/F
0.85 e.e.
W/F
15
PG
0.8
PEA
0.6
20 0.4
PEA
10
e.e.
S/F=1
0.2 PG
0
0
0.75 0
2
4
6
8
0
10
0 0.04
0.02 [C] = [rac], M
extractant excess [-]
40
40
30
30
30
20
20
10
10
10
0
0
15 20 10 5 0 8.5
9
9.5
N
W/F
20
40
W/F
25
10
N
Figure 3: Influence of extractant excess on PG separation (left, pH=9.1) and concentration level on equal e.e. points (W, e.e.) for separation of PEA (pH=9.4) or PG (right), S/F=2
0 0
pH
2
4
6
8
10
extractant excess [-]
Figure 4: Influence of pH (left) and extractant excess (right, pH=8.6) on W/F ratio and stage requirement N for PEA separation; e.e.=0.98 in both extract and raffinate, S/F=2, [rac]=0.02 M. 1
2.4
0.88
extract
0.87
0.9 raffinate
0.8
0.86
e.e.
W/F
e.e.
2.2
2 0.85
0.7
1.8 0
0.0005 [R-PG] in wash
0.001
0
0.0005
0.84 0.001
[R-PG] in wash
Figure 5: (left) Effect of reflux of R-PG in wash stream in PG separation on e.e. in extract and raffinate, fixed W/F=2.3, [rac]feed=0.01 M, S/F=2 with [C]=0.01 M (right) influence on location of equal e.e. points: W/F and e.e.
Performance Analysis and Optimization of Enantioselective Fractional Extraction with a Multistage Equilibrium Model
65
3.3. Minimal excess of extractant It was observed in the simulations that if there is no excess of extractant over the enantiomers, a full separation can never be obtained. Under these circumstances, the extractant will eventually become fully loaded, and adding more stages will not increase the product purity any further. Therefore, a minimal excess around 1.5 is required for the conditions and systems studied in this paper.
Wash stream W
3.4. Reflux The effect of reflux (addition of R-PG to wash stream) on e.e.’s in separation of PG is given in Figure 5(left) for a constant wash stream. It can be seen that the purity in the extract increases and the purity in the raffinate decreases. New ‘equal e.e.’ points were determined by adapting the wash stream. They are presented in Figure 5(right). It is concluded that reflux of the strongly bound enantiomer in the wash stream indeed results in a better e.e. (or lower stage requirement) and lower W/F ratio at the operating point. However, for an appreciable effect a rather large concentration of one enantiomer has to be present in the wash stream, so a large fraction of the W2 aq. stream product stream (raffinate 2) needs to be refluxed. Especially with a F high W/F ratio, application of fractional back Feed reflux may be uneconomical. extraction extraction (R,S) Figure 6: Conceptual flow sheet comprising fractional extraction and back-extraction unit with recycle of solvent stream. Assumption: R is preferentially extracted ( KR > KS)
solvent, C clean
solvent, R,C loaded
Raff. 2 R in water
Raff. 1: S in water
6
6
4
4
W2/F
W2/F
N=2 N=2
2
N=3
0
N=3
2 0
5.5
6 pH
6.5
5.5
6
6.5
pH
Figure 7: Back-extraction of PEA (left) and PG (right) by pH shift, aqueous stream W2 (as ratio to feed F) requirement for 99.5 % recovery. Data for N=2 and N=3, loading conditions: 5 °C, S/F=1.5, [C]=[rac]=0.02 M.
3.5. Back-extraction To recover the strongly bound enantiomer product and the extractant, the loaded solvent stream can be treated in a back-extraction unit (Figure 6). A convenient way to achieve back extraction by pH shift without producing salts is the addition of low-pressure CO2 [14]. The model results for back-extraction of PEA (left) and PG (right) by pH shift are
66
A.B. de Haan et al.
presented in Figure 7 for 2 and 3 equilibrium stages. It can be seen that the W2/F ratio decreases with decreasing pH and increasing number of stages. W2/F determines the dilution of the product in raffinate 2 compared to the feed meaning that for W2/F<1 (below dotted line), the product concentration has increased compared to the feed.
4. Design considerations in a multi-product environment Conventionally, an extractor is designed to separate a specific compound in the most economical way. However, for multi-product applications the extractor should contain sufficient stages for each component of (future) interest. It was found with the multistage model that if a multi-purpose extractor with 50 stages is built, all systems with αop > 1.5 can be succesfully separated, and with 30 stages, all systems with αop > 2.0. Any ‘excess’ stages for a certain component opens possibilities to increase the capacity or reduce costs in that specific separation. The multistage model can be used as a tool for optimization.
5. Conclusions The availability of the versatile crown ether extractant in combination with the multistage model results in a unique separation tool in a multi-product environment. The influence of changes in process parameters (pH, T, concentrations) can be predicted with the multistage equilibrium model for reactive extraction of phenylglycinol and phenylethylamine. The purity and yield can be improved by each measure that results in a higher extent of complexation; a higher wash flow rate is required then to obtain a good yield and purity in both product streams. Implementation of reflux results in somewhat higher product purities (or less stages) at a slightly smaller W/F ratio, but a significant loss in capacity. Recovery of product and extractant by backextraction should be carried out by pH shift, preferably with CO2 to prevent salt formation.
References [1] T.C. Lo, M.H.I. Baird, C. Hanson, 1983, Handbook of Solvent Extraction. Wiley-Interscience, New York [2] T. Takeuchi, R. Horikawa, T. Tanimura, 1984, Anal. Chem., 56, 1152-1155. [3] H.B. Ding, P.W. Carr, E.W. Cussler, 1992, A.I.Ch.E.J., 38, 1493-1498. [4] Y. Yokouchi, Y. Ohno, K. Nakagomi, T. Tanimura, Y. Kabasawa, 1998, Chromatography, 19, 374-375 [5] H. Tsukube, J. Uenishi, T. Kanatani, H. Itoh, O. Yonemitsu, 1996, Chem. Comm., 4, 477-478. [6] M. Pietrasckiewicz, M. Kozbial, O. Pietraszkiewicz, 1998, J. Membr. Sci., 138, 109-113. [7] P.J. Pickering, J.B. Chaudhuri, 1997, Chem. Eng. Sci., 52, 377-386. [8] Y. Abe, T. Shoji, M. Kobayashi, W. Qing, N. Asai, H. Nishizawa, 1995, Chem. Pharm. Bull., 43, 262-265. [9] Y. Abe, T. Shoji, S. Fukui, M. Sasamoto, H. Nishizawa, 1996, Chem. Pharm. Bull., 44, 15211524. [10] V. Prelog, Z. Stojanac, K. Kovacevic, 1982, Helv. Chim. Acta, 65, 377-384. [11] V. Prelog, S. Mutak, K. Kovacevic, 1983, Helv. Chim. Acta, 66, 2279-2284. [12] V. Prelog, M. Kovacevic, M. Egli, 1989, Angew. Chem. Int. Ed. 28, 1147-1152. [13] M. Steensma, N.J.M. Kuipers, A.B. de Haan, G. Kwant, 2006, Chirality, 18, 314-328. [14] M. Steensma, N.J.M. Kuipers, A.B. de Haan, G. Kwant, 2006, J. Chem. Techn. Biotechn., 81. 588-597. [15] M. Steensma, N.J.M. Kuipers, A.B. de Haan, G. Kwant, 2007, Chem Eng. Sci., 62, 13951407. [16] R.A. Sheldon, Chirotechnology, Industrial synthesis of optically active compounds. Marcel Dekker Inc., 1993.
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
67
Synthesis of Cryogenic Energy Systems Frank Del Nogal, Jin-Kuk Kim, Simon Perry and Robin Smith Centre for Process Integration, The University of Manchester, PO Box 88, Manchester, M60 1QD,United Kingdom
Abstract The use of cold energy should be systematically integrated with process streams in lowtemperature systems for energy savings and sustainable low-carbon society. In this paper, new design methodology for cascaded mixed refrigerant systems with multistage heat exchanges has been proposed, which systematically screens, evaluates and optimizes key decision variables in the design of refrigeration cycles (i.e. economic trade-off, partition temperature, refrigerant compositions, operating conditions, refrigerant flowrate). The integrated design and optimization for overall cryogenic energy systems is also addressed to reflect system interactions between driver selections and design of refrigeration systems. Two case studies are illustrated to demonstrate the advantage using developed design methods. Keywords: Low temperature energy systems, Mixed refrigerants, Power systems, Synthesis, Optimization
1. Provision of low-temperature cooling The provision of cold energy to process industries has gained far less attentions from process engineering community, compared to energy systems which is based on hightemperature energy carrier (e.g. steam), although sub-ambient cooling has a significant potential for energy saving in practice. Effective use of cold energy is vital to ensure the cost-effectiveness of low-temperature processes, as significant power requirement for compression is one of major energy consumptions in the provision of cryogenic cooling to process streams. One of widely-used techniques to save energy requirement in the cryogenic energy systems is to apply a heat integration technique, such that most appropriate levels and duties for refrigeration are determined to match them against GCC (grand composite curve), as shown in Figure 1 (Linnhoff et al., 1982; Linnhoff and Dhole, 1989; Smith 2005). The GCC represents overall characteristics of energy systems, and this provides better understanding how to design the refrigeration cycles. Figure 1 illustrates the cycle in which pure refrigerant is employed as a working fluid, and two levels of cooling for process streams are facilitated by using multiple expansion. If one level of refrigeration is provided, all the cooling duty is provided at Level 2, which results in large compressor shaftpower requirements. The thermodynamic efficiency of the simple cycle can be improved by introducing economizer, vapor cooler and inter-cooler with multi-level expansion (Wu, 2000, Smith 2005). The cascading two simple cycles, in which different refrigerant is used, is a useful way to reduce shaftpower requirements for compressor when large temperature range is to be covered by refrigeration. Another important degree of freedom for energy
F. Del Nogal et al.
68
saving in refrigeration system is the decision for how to reject heat to or remove heat from process stream(s). These considerations often lead to have a complex cycle with multi-levels and/or cascaded arrangement, which consists of large number of unit.
T*
Level 1
Q1
Level 1 W
Q2
Level 2 Level 2
Q1
(A)
ΔH
Q2 (B)
Figure 1. Refrigeration with pure refrigerant The use of mixed refrigerants in the cycle can simplify the structure of refrigeration cycle as well as reduce compression duty significantly. As illustrated Figure 2a, the close match between hot (process) stream and cold (refrigeration) stream can be achieved by using mixed refrigerant, while pure refrigerant cannot avoid thermodynamic inefficiency due to large gap existed between two streams. The shape of refrigeration stream in Figure 2a depends on the composition of refrigerants and its operating conditions. When large temperature range is to be cooled by mixed refrigerant systems, cascade arrangement is also possible (Figure 2b). Other structural variations to obtain a better match between hot and cold stream profiles had been suggested, for example, repeated partial condensation and separation of the refrigerant stream (Finn et al., 1999), and a self-cooling mixed refrigerant cycle (Walsh, 1993). T
Process stream T
Process stream Upper cycle
Pinch Point Evaporator (mixed refrigerant)
Partition temperature
Lower cycle Evaporator (pure refrigerant) H
H (A)
(B)
Figure 2. Mixed refrigerant systems In order to explore the advantages from mixed refrigerant systems, it is aimed to develop a systematic design and optimization framework for mixed refrigerant systems, in which design interactions are systematically investigated, as well as all the available structural and operating options are fully screened to provide optimal and economic design. The developed new design method also overcomes shortcomings which had not
Synthesis of Cryogenic Energy Systems
69
been fully addressed in previous works done by Lee (2001) and Vaidyaraman and C. Maranas (2002): i) ii) iii) iv)
enforcement of minimum temperature difference (ΔTmin) throughout the heat recovery systematic trade-off between capital and operating cost multi-stage compression with inter-cooling, and avoiding being trapped in local optima.
2. Optimization of Mixed Refrigerant Systems Mixed refrigerant systems are optimized with the superstructure shown in Figure 3. The superstructure used in this work is arranged with multi-stage heat exchangers in which mixed refrigerant cycle provides not only cooling for a process stream, but also cooling of a hot gas stream. The liquid refrigerant is separated from hot refrigerant stream, and this can be further subcooled in the exchanger before expansion or can be expanded without subcooling. Both cases can be considered within the superstructure proposed in the study. The complexity of the multi-stage arrangement is further increased by introducing cascading of two cycles. The composition of refrigerants and operating conditions for each cycle can be chosen differently, which provides great flexibility in the design as the cooling profile can be closely matched with process stream. The heat recovery is integrated between upper and lower cycles. It should be noted that economic trade-off should be made to justify gains obtained from complex structures at the expense of capital cost.
.....
Process Stream
Figure 3. Superstructure for cascaded mixed refrigerant systems The key optimization variables in the design are: flowrate and composition of mixed refrigerants for each cycle, intermediate temperature between stages for each cycle, and operating pressures of stream after and before compressor for each cycle. The optimization formulation includes: •
Objective function
F. Del Nogal et al.
70
• • •
Material and energy balances for each stage Pressure, temperature and enthalpy profiles Multistage compression arrangement with inter-cooling
The developed optimization is solved with genetic algorithm as the previous study based on deterministic optimization techniques showed that it is often trapped in local optima, due to highly non-linear nature of formulations in the model. The simulation model and genetic algorithm is interacted to produce high quality optimal solution(s), although computational time is relatively expensive. It should be mentioned that one of important features in the developed model is to ensure feasibility of heat recovery in every exchanger. The potential candidate (design) produced during optimization, is simulated, and cold and hot composite curves are produced. Then this is rigorously checked against given ΔTmin.
3. Case study 1 First case study is to liquefy gas stream from 25 oC to -163 oC by single mixed refrigerant cycle with a single stage. The energy data for process stream is given in Figure 4. The objective function is to minimize the shaftpower demand for compression. When 5 oC of ΔTmin is considered, the optimal cooling systems with 27.8 MW of minimum power demand are given in Figure 4, in which compositions of refrigerants and operating conditions (flowrate, pressure) are shown as well. The comparison between Lee’s (2001) method and new method is made, which shows 8 % of improvement in power demand from new method. 30 oC
2.81 kmol/s 45.1 bar 1.8 bar
Process Stream
25 oC
-163 oC
N 2 14.5 % C 1 19.5 % C 2 39.3% C 3 0.04% n-C4 26.67 %
Temp ( oC) ΔH (MW) 25 -6 -57.7 -74.6 -96.5 -163
20.2 18.3 14.5 10.2 5.9 0
Figure 4. Case study 1: Optimal design for single mixed refrigerant systems
4. Case study 2: Integrated design for low-temperature energy system with driver selection The second case study is to cool gas stream from 35 oC to -160 oC, and the detailed energy flow is given in Figure 5. In this example, cascade mixed refrigerant systems is optimized with 3 oC of ΔTmin.
Synthesis of Cryogenic Energy Systems
71
As low-temperature energy systems employs a series of compressor, the driver selection (i.e. matching between mechanical power demands and available direct drivers) is very important in the overall system design. The design of refrigeration systems (i.e. number of compressor and its duty) inevitably affects the driver selection, and therefore, an integrated design between refrigeration and driver selection should be made. The simultaneous optimization between two design problems are carried out, which provides more realistic and applicable design. (Figure 6) The optimized variables are shown in the Figure 5, at the minimum power demand with 216.06 MW. It should be noted that the design results from an integrated optimization of overall low-temperature energy systems, with the full consideration of driver selections. It is clearly illustrated that the composition and operating conditions per each cycle are optimized to serve for each operating range. One stage for each cycle is chosen in this case, as multi-stage arrangement is not favored, due to large capital expenditure. F = 20.3 kmol/s N2 0.1 % C1 9.8 % C2 41.6 % C3 11.8 % n-C4 37.3 %
37.3 bar 4 bar 35 oC
Process Stream
Temp ( oC) ΔH (MW) 35 4.5 -21.9 -54.0 -80.0 -131.4 -160.0
42.2 bar
212 186 158 120 65 22 0
F = 12.9 kmol/s N 2 11.1 % C 1 40.1 % C 2 35.3 % C 3 13.0 % n-C4 0.5 %
1.9 bar -160 oC
Figure 5. Case study 2: Optimal design for cascade mixed refrigerant systems Genetic Algorithm
Objective function
Set of operating conditions with structural options
Refrigeration simulator Updated power demands
Driver selection
Integrated design
Figure 6. Integrated design for low-temperature energy systems
72
F. Del Nogal et al.
5. Summary The developed new synthesis method for mixed refrigeration system provides not only energy saving in cryogenic systems but also conceptual understanding of the design problem in cold energy management. The effective way for providing cold energy is exploited from cascaded multi-stage mixed refrigeration cycles, which can be very effective to reduce compression power in low-temperature systems. Also the integrated design of refrigeration and driver selection is also developed and discussed from the case study.
References A. Finn, G. Johnson and T. Tomlinson (1999) Developments in Natural Gas Liquefaction, Hydrocarbon Processing, 78 (4) G. Lee (2001) Optimal design and analysis of refrigeration systems for low temperature processes, PhD Thesis, UMIST, Department of Process Integration, Manchester, UK B. Linnhoff and V. Dhole (1989) Shaftwork Targeting for Subambient Plants, AIChE Spring Meeting, Houston, US B. Linnhoff, D. Townsend, D. Boland, G. Hewitt, B. Thomas, A. Guy and R. Marsland (1982) User Guide on Process Integration for the Efficient Use of Energy. IChemE: Rugby, England, 1982 R. Smith (2005) Chemical Process Design and Integration, John Wiley & Sons, Ltd., UK S. Vaidyaraman and C. Maranas (2002) Synthesis of Mixed Refrigerant Cascade Cycles, Chemical Engineerng Communications, 189 (8) B. Walsh (1993) Mixed Refrigerant Process Design, Off. Proc. Comb. Conf., 6th Conf. Asia Pac. Confederation. Chemical Engineering, 1, 59/1-64/1 G. Wu (2000) Design and Retrofit of Integrated Refrigeration Systems, PhD Thesis, UMIST, Manchester, UK
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
73
Study of a novel Heat Integrated Hybrid Pervaporation Distillation Process: Simulation and Experiments a b
M.T. Del Pozo Gómez, a P. Ruiz Carreira, a J.-U. Repke, a A. Klein, T. Brinkmann, a G.Wozny,
a
Institute for Process Engineering, Berlin University of Technology, Strasse des 17. Juni 135, Berlin 10623, Germany b GKSS Research Centre GmbH, Department of Process Engineering, Institute of Polymer Research, Max-Planck-Straße 1, Geesthacht D-21502, Germany
Abstract In the present work a new developed heat integrated hybrid pervaporation distillation process is modeled and experimental studies are carried out to analyze the effect of the heat integration in the process. With the results of the experiments, the model is validated and a comparison between industrial scale non heat integrated and heat integrated processes is done. As a result, three main advantages are presented in the approach: a) reduction of the necessary external energy supply into the process, b) improvement in the pervaporation separation performance and c) reduction in the necessary membrane surface. Keywords: heat integration, hybrid process, pervaporation, azeotropic mixtures
1. Introduction The separation of homogeneous azeotropic mixtures has always been a highly energy consuming process in the chemical industry. Many efforts have been done in the last decade to find new and more efficient processes that improve the thermal separation techniques in practice. Between the different studied alternatives outstands the hybridpervaporation distillation process [F. Lipzinski, 1999]. It has been seen in previous studies [P. Kreis, 2004] that this technique can lead to a considerable reduction in the process costs by decreasing the total energy consumption. But despite of these promising results, only the application in the field of organic solvents dehydration has gained a bigger importance in the chemical industry [A. Jonquières, 2001], and the only way to increase its use is with the improvement of the pervaporation technique using a more efficient module design or a better performance membrane. In the present paper, for the bettering of the pervaporation process, the necessary external energy supply will be reduced. The pervaporation process is a separation process, which is based on the selective transport through a dense membrane combined with a phase change of the permeating components from liquid to vapor [F. Lipnizki, 2001]. To make the change of state (liquid – vapor) possible, energy is required. That is normally reflected in a temperature drop between the inlet feed and the outlet retentate streams, what makes the use of external heat exchangers necessary after consecutive pervaporation modules. In previous studies [M. T. Del Pozo Gomez, 2007] it has been found, that the use of the saturated vapor going out at the top of the distillation column as a heating medium inside the pervaporation module (see fig.1) can lead to a lower energy consuming process avoiding the need of external heat exchangers minimizing
74
M.T. Del Pozo Gómez et al.
the temperature drop along the module, and increasing the permeate flux. In the present work, the use of the heat integration in the process is studied in detail and experimentally demonstrated. For that aim, a heat exchanger has been built and integrated with a flat sheet membrane module and a model for the whole hybrid process has been built and experimentally validated. Finally, the total energy saving in an industrial scale heat integrated process is calculated.
Figure 1: Hybrid pervaporation distillation process flow sheet. Left with external heat exchangers, right with heat integration.
2. Study of the heat integration concept 2.1. Model of the process For the study of the process, a set of partial differential model equations for a flat sheet pervaporation membrane with an integrated heat exchanger (see fig.2) has been developed. The temperature dependence of the permeability coefficient is defined like an Arrhenius function [S. Sommer, 2003] and our new developed model of the pervaporation process is based on the model proposed by [Wijmans and Baker, 1993] (see equation 1). With this model the effect of the heat integration can be studied under different operating conditions and module geometry and material using a turbulent flow in the feed. The model has been developed in gPROMS® and coupled with the model of the distillation column described by [J.-U Repke, 2006], for the study of the whole hybrid system pervaporation distillation. § EA J p ,i = Qreference,i ⋅ exp¨ i ¨ R ©
§ 1 1 ⋅¨ − ¨T T feed © reference
·· ¸ ¸ ⋅ X i , feed ⋅ γ i , feed ⋅ p i0, feed − p i , permeate ¸¸ ¹¹
(
i Xi
Component in the mixture Mole fraction (mole/mole)
pi0 R Q
Pressure for the pure component (bar) Ideal gas constant (J/ mol K) Permeability (kg/m2 hr bar)
)
(1)
Jp
γi
Permeate flux (kg/m2 hr) Activity coefficient
pi T
Partial pressure (bar) Temperature (K)
Study of a Novel Heat Integrated Hybrid Pervaporation Distillation Process: Simulation and Experiments
75
Figure 2: Flat membrane module with heat integration. Left, whole module structure, right, picture of the heat integration part.
2.2. Experimental work For the model validation and the analysis of the heat integration in the hybrid pervaporation distillation process, a laboratory plant has been built at the TU -Berlin and prepared for the connection with the distillation column (see fig. 3). With this plant experiments with a flat PVA-based (Polyvinylalcohol from GKSS) hydrophilic membrane have been done. A heat exchanger has been built within the pervaporation module. The temperature in the heat exchanger has been necessary to avoid the temperature drop between feed and retentate streams in the pervaporation process. In the process a 2-Propanol/ Water mixture has been separated. The concentration of 2Propanol in the feed is between 80 and 90 % in weight and the temperature range in the experiments was between 70 and 90°C. The feed flow is turbulent and the system fully insulated to avoid heat looses. The pressure in the permeate side has been kept at 30 mbar and the feed pressure at 1.5 bar.
Figure 3: Pervaporation pilot plant in the TU- Berlin. Left process diagram, right pilot plant.
With help of a Freelance ABB process control system, the process was monitored and controlled and important variables of the system were recorded.
76
M.T. Del Pozo Gómez et al.
3. Results and discussion 3.1. Membrane characterization and validation of the model After experimental work, the value of the activation energy (EA) and the reference permeability (Qref) for a PVA-based (from GKSS) pervaporation membrane and mixture in use have been obtained (see table1), and the model for the pervaporation process with and without heat integration has been successfully validated. The absolute error between the model and the experimental permeate fluxes is under 8% (see fig.4), and almost insignificant for the water purity in the permeate side (under 0.5%) obtaining a permeate stream with up to 99.9% in water. Table 1. Results of the membrane characterization for a reference temperature of 70°C. EA (J/mol)
Qref (kg/m2 hr bar)
2- Propanol
-69663.2
6.4E-4
Water
-230.73
1.483
Jp (kg/m 2 hr), model
Compound
8 % Absolute error
0.6 0.5 0.4
W ithout heat integration
0.3 0.2 0.1
W ith heat integration
0 0
0.1
0.2
0.3
0.4
0.5
0.6
2
Jp (kg/m hr), experimental Figure 4: Model validation. Permeate flux (Jp) experimental and model results, using a flat PVA based organic module by dehydratation of a 2- Propanol/ Water azeotropic mixture. The temperature was kept between 70 and 90°C and experiments with and without heat integration were done.
3.2. Influence of the heat integration in the pervaporation process Experiments with and without heat integration have been done under the same conditions in order to study the effects of the heat integration in the process. It has been found, that by supplying the energy necessary for the pervaporation, the total permeate flux increased more than 13% (see fig.5) and, if the total energy provided by the condensation of the vapor is supplied, even a higher increase in the permeate flux can be achieved (up to 22%) getting permeate fluxes around 0.36 kg/ m2 hr. The increase in the permeate flux has an important influence into the process, making possible, either the reduction of the necessary membrane area (for a desired product purity), or the increase of the product purity (if the membrane area is kept constant). No need of external heat exchangers between two pervaporation modules is required, and
Study of a Novel Heat Integrated Hybrid Pervaporation Distillation Process: Simulation and Experiments
77
all the energy supplied into the pervaporation module can be obtained from the condensation of the distillate stream [A. Klein, 2006].
Jp (kg/m2 hr)
0.35 Experiments with heat integration Model with heat integration
0.33 0.31 0.29
Experiments without heat integration Model without heat integration
0.27 0.25 86.8
87
87.2
87.4
87.6
87.8
88
% wt. 2-Propanol in Feed
Increase in the permeate flux due to the heat integration
Figure 5: Influence of the heat integration in the permeate flux at a feed temperature of 70°C.
3.3. Comparative study of the industrial scale process with and without heat integration With the validated model, and on the basis of the industrial scale operation parameter presented by [S.Sommer, 2004] (see table 2), the configurations with and without heat integration have been compared for an industrial scale process. It has been found that the total energy supply in the process per kg final product can be reduced about 28% and that a higher product purity is obtained (see table 3) due to the heat integration effect. This is reflected not only in the reduction of the energy consumption, but also in a smaller necessary membrane area, if the desired purity of the product is constant. Table 2. Operation conditions of the industrial scale simulation processes. Pressure in the column
1.015 bar
Number of stages in the column
8
Feed wt% 2- Propanol in the column Feed wt% Water in the column
Feed flow rate in the column
1875 kg/hr
80
Bottom wt% Water in the column Membrane Area
99.8 125 m2
20
Permeate pressure
20 mbar
Table 3. Comparison between the energy conssumption in the two processes lay -out. [kW] Reboiler
[kW] External
[kW] Condenser
[kg/hr] product
[kJ/kg product]
With heat integration
509.87
46 (compressor)
311.63
1490.59 (90.6% wt. 2-Propanol)
2095.14
Without heat integration
525
170 (membrane feed reheating)
520
1500 (90% wt. 2Propanol)
2916
78
M.T. Del Pozo Gómez et al.
4. Conclusions In the present paper, the influence of the novel heat integration concept has been successfully demonstrated and studied in detail. For that purpose, a heat exchanger has been built including a flat membrane module. A new model describing the heat integrated process has been developed in gPROMS® and experimentally validated. It has been proven that an important effect of the heat supply is the increase in the total permeate flux up to 22%. That will be directly reflected in higher product purity for a constant membrane area or in a smaller membrane surface requirement if the desired product purity is fixed, having a more profitable process. The concentration of water in the permeate side has been within the desired values (over 99.9%) and the model predictions of the separation process for the azeotropic mixture 2-Propanol/Water are adequate. The comparison of the industrial system with and without heat integration has been done. As a result, in the case with heat integration the total energy supply in the process can be reduced about 28% and the product purity can increase. In the presentation, the results of the model and experiments and the comparison of the process with and without heat integration will be shown in further detail and the advantages of the new heat integration concept will be proven.
5. Acknowledgements The authors would like to thank EFRE (request number 10134788) for sponsoring this project, and PolyAN GmbH for the cooperation in the present research work.
References M.T. Del Pozo Gómez, A. Klein, J.-U. Repke, G. Wozny, 2007, Study and Design of a Heatintegrated Hybrid Pervaporation-Distillation Process, ECCE-6 1357 Distillation, Absorption & Extraction. A. Klein, J.-U. Repke, M. T. Del Pozo Gómez, G.Wozny, 2006, Hybrid -PervaporationDistillation processes – a novel heat-integration approach, AJChE 409 Separation Design. J.-U. Repke, F. Forner, A Klein, 2006, Separation of Homogeneous Azeotropic Mixtures by Pressure Swing Distillation – Analysis of the Operation Performance, Chem. Eng. Techn., vol. 28, 1151-1557. S. Sommer, T. Melin, 2004, Design and Optimization of Hybrid Separation Processes for the Dehydration of 2-Propanol and Other Organics, Ind. Eng. Chem., vol. 43, 5248-5259. P. Kreis, 2004, Prozessanalyse hybrider Trennverfahren, Dissertation, Dortmund, Germany. S. Sommer, 2003, Pervaporation and vapour permeation with Microporous Inorganic Membranes, PhD Thesis, RWTH Aachen, Germany. J. Lipzinski, G. Trägardh, 2001, Modelling of Pervaporation, Models to analyze and predict the mass transfer transport in Pervaporation, Separation and Purification Methods, vol. 30(1), 4925. A. Jonquières, R. Clément, P. Lochon, J. Néel, M. Dresch, B. Chrétien, 2001, Industrial state-ofthe-art of pervaporation and vapour permeation in the western countries, Journal of Membrane Science, vol. 206, 87 -117. F. Lipzinski, R.W. Field and P.-K. Ten, 1999, Pervaporation-based hybrid process: a review of process design, applications and economics, Journal of Membrane Science vol. 153, 183 – 10. J.G. Wijmans, R.W. Baker, 1993, A simple predictive treatment of the permeation process in pervaporation, Journal of Membrane Science, vol. 79, 101-113.
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
A Novel Network-based Continuous-time Formulation for Process Scheduling Diego M. Giménez,a Gabriela P. Henning,a Christos T. Maraveliasb a
INTEC (Universidad Nacional del Litoral - CONICET), Güemes 3450, S3000GLN Santa Fe, Argentina b Department of Chemical and Biological Engineering, University of Wisconsin – Madison, USA
Abstract We present a novel network-based continuous-time formulation for process scheduling that addresses multiple limitations of existing approaches. Specifically, it handles nonsimultaneous transfers of input/output materials to/from processing units; it employs a more flexible time representation; and it explicitly accounts for unit connectivity. This is accomplished via the modelling of two key issues: (i) the state of a processing/storage unit, and (ii) the material transfer between processing and storage units. The proposed formulation allows us to model many complexities associated with process scheduling and obtain solutions to problems that cannot be addressed by existing methods. Keywords: process scheduling; network-based continuous-time formulation.
1. Introduction Existing network-based scheduling formulations are based on the state-task network (STN) or the resource-task network (RTN) representation (Kondili et al., 1994; Pantelides, 1994). In these formulations it is implicitly assumed that: a) material transfer between units is always possible, i.e. all processing units are connected to all the vessels that are used for the storage of the corresponding input and output materials; b) all input/output materials of a task are transferred simultaneously to/from the processing unit when the task starts/ends; and c) stable output materials can be temporarily stored in a processing unit after a task is completed, but stable input materials cannot be temporarily stored before a task starts, i.e. in continuous time representations the beginning of a task must coincide with a time point and at such point all the materials should be available. However, these assumptions do not always hold. For example, in recovery and purification processes the solvent can be drained earlier. Similarly, in certain chemical reactions reactants are fed before the beginning of the task, which actually occurs when the catalyst is added. Interestingly, despite the large number of methods recently proposed to tackle process scheduling, there are very few attempts to address these limitations. Barbosa-Póvoa and Macchietto (1994) discuss the issue of connectivity and material transfer in the context of discrete-time formulations. However, to our knowledge none of the existing methods deals with the shortcomings due to assumption (c). The goal of this paper is the development of a novel approach that overcomes these shortcomings. The key ideas of the proposed method are presented in section 2. The main variables and constraints of the mixed-integer linear programming (MILP) formulation are presented in section 3. The advantages of the new method are illustrated through a small example problem in section 4.
79
80
D.M. Giménez et al.
2. Proposed Approach 2.1. Time Representation We introduce a new global continuous-time representation: a set of global time points kK={1, 2, …K} span the scheduling horizon from 0 to H delimiting a set of K-1 time intervals of unknown length, where interval k starts at time point k and ends at k+1. The novelty of this new representation is that tasks do not have to start (or finish) exactly at a time point. In other words, a task assigned to start on a unit at time point k can actually start any time within interval k (late beginning) as Fig. 1a shows. Similarly, a task that is assigned to end at time point k can actually end at any time within interval k-1 (early end). Thus, the new representation can potentially lead to formulations with fewer time points. 2.2. Process States Unlike previous network-based models, a processing unit can be used both for carrying out process tasks or storing input/output materials before/after the start/end of a task. Furthermore, input/output materials do not have to be simultaneously transferred to/from a unit. Hence, a unit jJ can be in three different states during time interval k (Fig. 1b): a) idle state (Wj,k=1); b) storage state; and c) execution state (Ej,k=1). If used for storage, then it can either be used for input (SIj,k=1) or output (SOj,k=1) materials. The execution state is delimited by the formal task boundaries, which are given by the values of the event variables associated with task beginning and end. If a task iIj is assigned to start in unit j within interval k (at or after time point k) then Xi,j,k=1, where Ij is the set of tasks that can be carried out in unit j. If a task is assigned to end within interval k-1 (at or before time point k) then Yi,j,k=1. In addition, an auxiliary variable indicates when a task started before time point k is still being processed in unit j at such time (Zj,k=1). 2.3. Time Balances To accurately account for a late beginning or early end of a task in unit j after and before time point k, respectively, we introduce two new variables: a) T j LB , k that denotes the lateness within interval k in starting a task, and b) T j EE , k that denotes the earliness within interval k-1 in finishing a task. We also introduce variables to model the time a S processing unit remains idle ( T j ID , k ) or is used for storage T j , k , during interval k (Fig. 1c). Early end within [Tk’-2, Tk’-1] Output
Late beginning within Input [Tk+1,Tk+2] Task T: A + B o C + D storage
Idle
storage
Task T Tk-1
Tk
Tk+1
Tk+2
Tk’-2
Tk’-1
Tk’
(a) Proposed time representation W j ,k 1 1 S
I j ,k
O j , k ' 1
1 E j ,k 1 1 E j ,k 2 1 X T , j ,k 1 1 Z j ,k 2 1
Z j ,k' 2
E j ,k '2 1 S 1 Y j ,k' 1 1
1
Task T Tk-1
Tk
Tk+1
Tk+2
Tk’-2
Tk’-1
Tk’
(b) States of processing units T j ST ,k
T j ID , k 1
T
T
LB j , k 1
Processing Time
EE j ,k ' 1
T j ST , k ' 1
Task T Tk-1
Tk
Transfer of A at Tk
Tk+1 Transfer of B at Tk+1 B
A
Tk+2
Tk’-2
Tk’-1
Tk’
(c) Time balances Consumption of A & B by task T
Production of C & D by task T
Transfer of Transfer C at Tk’-1 of D at Tk’ D
C
Task T Tk-1
Tk
Tk+1
Tk+2
Tk’-2
(d) Material transfer
Figure 1. Key concepts of the proposed formulation
Tk’-1
Tk’
A Novel Network-Based Continuous-time Formulation for Process Scheduling
81
2.4. Material Transfer and Material Balances Material transfer is formulated explicitly via flow variables. In the context of this contribution, the concept of flow represents an instantaneous transfer of material from a storage/processing unit to another physically connected storage/processing unit. Only one material can be stored in a storage unit vV in any time interval, but multiple input/output materials can be simultaneously stored in a processing unit before/after a task starts/ends. Material balance constraints in storage units include only incoming and outgoing flows. The corresponding balances in processing units include the incoming and outgoing flows as well as production and consumption terms that correspond to the transformation of materials by process tasks (Fig. 1d).
3. Mathematical Formulation In addition to the event ( X ijk ,Yijk ), state ( W jk , E jk , S Ijk , S Ojk ) and auxiliary ( Z jk ) binary variables, time corresponding to point k (Tk), and timing variables ( T jkLB , T jkEE , T jkID , T jkST ), the following continuous variables are defined: VV VU x Flows FmUV, j , v , k , FmUU , j , j ', k , Fm , v , v ', k , Fm , v , j , k to represent instantaneous transfers of material m at time point k between storage vessels (V) and processing units (U), where the letter sequence in the superscript denotes the direction of the transfer. x Batch-sizes BiS, j , k , BiP, j , k , BiF, j , k to denote the total amount of task i that starts to be processed, that keeps processing and finishes, respectively, in unit j at time point k. x Inventory I mV , v , k of material m in storage vessel v during time interval k, and inventory I mUI, j , k / I mUO, j , k of input/output material m in processing unit j during time interval k. To facilitate the presentation, in the remaining we use capital letters for variables, small letters for parameters (with the exception of horizon H) and bold capital letters for sets. 3.1. State Constraints Clearly, a processing unit has to be in exactly one state during each time interval:
E j ,k W j ,k S Ij ,k S Oj ,k
1, j ,k K
(1)
A unit is in the execution state during interval k if a task starts within such interval, i.e. at or after point k, or another task started in a previous interval is still being executed:
E j,k
Z j , k ¦ X i , j , k , j , k K
(2)
i I j
Finally, the Zj,k auxiliary variable (denoting that at time point k unit j continues executing a task previously started) can be defined as follows:
Z j ,k
Z j ,k 1 ¦ X i , j ,k 1 ¦ Yi , j ,k iI j
j, k ! 1
(3)
iI j
3.2. Timing Constraints A late beginning (early end) with respect to time point k can only occur if a task is assigned to start (end) in unit j at such time point, as the following inequalities indicate:
T j LB ,k d H
¦X
i, j,k
i I j , iI cZW
, j , k K ;
T j EE ,k d H
¦Y
i, j ,k i I j , i I pZW
, j , k ! 1
(4)
where IcZW/IpZW are the sets of tasks consuming/producing unstable materials for which late beginnings and early ends are forbidden. Similarly, storage and idle times occur only if the unit is in the corresponding state:
82
D.M. Giménez et al.
T j ID j , k K , k d HW j , k ,
I O T j ST j , k K ; , k d H ( S j , k S j , k ),
(5)
In that case, the idle and storage times should be equal to the length of the time interval: ID Tk 1 Tk H (1 S Ij ,k S Oj ,k W j ,k ) d T j ST , k T j , k d Tk 1 Tk
j, k K
(6)
3.3. Time Balance Constraints Constraints (7)-(9) are used to define the continuous-time grid and enforce the appropriate timing constraints without resorting to big-M terms: LB ST ID Tk t ¦¦ (aijYi , j ,k ' bij BiF, j ,k ' ) ¦ T j EE j, k ! 1 ,k ' ¦ (T j ,k ' T j ,k ' T j ,k ' ), k 'dk iI j
k 'dk
(7)
k 'k
¦¦ (a
LB ST ID X i , j ,k ' bij BiS, j ,k ' ) ¦ T j EE j, k K (8) ,k ' ¦ (T j ,k ' T j ,k ' T j ,k ' ) d H Tk ,
¦ (T
ID ST F T j EE , k T j , k T j , k ) ¦¦ ( aijYi , j , k bij Bi , j , k )
ij
k 'tk iI j
k
LB j,k
k '!k
k 'tk
H , j
(9)
i I j k
where aij and bij are the fixed and proportional processing time constants. 3.4. Batching constraints Batch-size variables are constrained as follows:
E jMIN X i , j ,k d BiS, j ,k d E jMAX X i , j ,k , i I , j J i ,k K
(10)
BiF, j ,k d E jMAX Yi , j ,k , i I ; j J i ,k ! 1
(11)
BiS, j ,k BiP, j ,k
(12)
where
ȕjMIN/ȕjMAX
BiP, j ,k 1 BiF, j ,k 1 , i , j J i ,k K is the minimum/maximum capacity of unit j.
3.5. Material Balances 3.5.1. Storage Vessels The material balance constraint in storage vessels is expressed as follows:
I mV , v , k
I mV , v , k 1
¦F
VU m,v, j ,k
jJ v
¦F
VV m , v , v ', k
v 'V v
¦F
UV m, j ,v, k
j J v
¦F
VV m , v ', v , k
,
v 'V v
(13)
m ( M NIS M ZW ), v Vm , k where Jv/Vv are the sets of units/vessels connected to vessel v, MNIS/MZW are the sets of tasks for which non-intermediate storage/zero-wait storage policies are enforced, and Vm is the set of vessels that can be used to store up material m. The inventory is constrained not to exceed the maximum storage capacity 9m,vMAX by expression (14).
I mV , v , k d 9 mMAX m ( M NIS M ZW ), v Vm , k ,v ,
(14)
3.5.2. Processing Units The corresponding material balances in processing units for input and output materials are expressed via equations (15) and (16), respectively:
I mUI, j ,k
I mUI, j ,k
¦F
VU m ,v , j , k
vVi Vm
¦F
UU m , j ', j , k
j 'J j
¦J
C iI j I m
im
BiS, j ,k , m, j , k
(15)
A Novel Network-Based Continuous-time Formulation for Process Scheduling
I mUO, j ,k
I mUO, j ,k
¦J
iI j I mP
im
BiF, j ,k
¦F
PS m , j ,v , k
vV j Vm
¦F
PP m , j ', j , k
, m, j , k
83
(16)
j 'J j
where ImC/ImP are the sets of tasks consuming/producing material m, Jj/Vj are the sets of units/vessels connected to unit j, and Ȗim is the stoichiometric coefficient of material m in task i (negative if consumed). Note that inventory level changes in processing units are due to material transfer as well as material consumption and production by processing tasks. Obviously, input/output materials can only be stored in a processing unit if the unit is in the corresponding state:
¦I
UI m, j , k
d E jMAX S Ij , k ,
j , k K ;
m
¦I
UO m , j ,k
d E jMAX S Oj ,k , j , k K
(17)
m
3.6. Utility Constraints The total amount Rr,k of utility r consumed at time interval k is calculated through equation (18), and constrained not to exceed the maximum availability ȡrMAX by (19):
Rr , k
Rr , k 1 ¦ ¦ [ f ijr ( X i , j , k Yi , j , k ) gijr ( BiS, j , k BiF, j , k )], r , k K (18) i I r jJ i
Rr ,k d U rMAX , r , k K
(19)
where Ir is the set of tasks requiring utility r, and fijr and gijr are the fixed and proportional, respectively, constants for the consumption of utility r by task i in unit j. 3.7. Objective function The proposed model consists of expressions (1)–(19) and can be used to tackle various objective functions. In this short communication the profit maximization is studied:
z
max
¦ ¦S
mM FP vVm
V m m ,v , K
I
(20)
where ʌm is the price of material m and MFP is the set of products that can be sold.
4. Example A scheduling problem corresponding to a simple multipurpose batch plant is studied in order to show the main advantages of the proposed formulation. The process structure, task information and material data are described in Fig. 2. The profit maximization for a time horizon of 8 hours (H=8) is pursued. The problem instance was solved with the aim of getting an optimal schedule in a case where existing models cannot even obtain a feasible solution. In this example it is easy to note that, since no intermediate initial inventory is held, the only way to obtain final products is by performing task T2 first (so INT1 and INT2 can be available), then executing T1 (so INT3 can be available), and finally either T3 or T4. Nevertheless, since a NIS policy is adopted for INT2, T4 should begin immediately after task T2 finishes. However, this is infeasible for current approaches because INT3 cannot be available at that time (INT3 is produced by T1, which cannot start until T2 finishes since it consumes INT1). The proposed formulation overcomes this limitation by allowing a temporal storage of INT2 in unit R-103 until INT3 becomes available. Thus, the material load/discharge is decoupled from the task beginning/end.
84
D.M. Giménez et al.
Elements
Tasks Stoichiometric Relations
Processing Units: R-101, R-102, R-103 Tasks: T1, T2, T3, T4 Vessels: V-101, V-102, V-103, V-104, V-105, V-106 Materials: RM1, RM2, INT1, INT2, INT3, P1, P2 Utilities: Hot Steam (HS), Cooling Water (CW)
T1 T2 T3 T4
Material Data m ʌm ($/kg) v
Plant Topology 9 mMAX ,v
Inventory (kg)
RM1 RM2 INT1 INT2 INT3 P1 P2
UIS UIS FIS (200) NIS FIS (500) UIS UIS
1000 1000 0 0 0 0 0
0 0 0 0 0 30 40
V-101 V-102 V-103 V-104 V-105 V-106
0.8 RM1 + 0.2 INT1 o INT3 RM2 o 0.3 INT1 + 0.7 INT2 INT3 o P1 0.6 INT2 + 0.4 INT3 o P2
V-101
R-101
V-102
R-102
V-104
V-105
V-103
R-103 V-106
Task Information i
j
aij (h)
bij (h/kg)
E jMIN (kg) E jMAX (kg)
r
fijr (kg/min) gijr (kg/min.kg) U rMAX
T1
R-101 R-102 R-101 R-102 R-103 R-103
0.5 0.5 0.75 0.75 0.25 0.5
0.025 0.04 0.0375 0.06 0.0125 0.025
40 25 40 25 40 40
HS HS CW CW HS CW
6 4 4 3 8 4
T2 T3 T4
80 50 80 50 80 80
0.25 0.25 0.3 0.3 0.2 0.5
(kg/min)
30 30 30 30 30 30
Figure 2. Example of a very simple multipurpose facility
Figure 3 presents the optimal schedule obtained by implementing the proposed MILP model in GAMS/CPLEX 10.0 on a Pentium IV (3.0 GHz) PC with 2 GB of RAM, adopting a zero integrality gap. It can be seen that six global time points (five time intervals) were required to obtain this optimal solution. The model instance involved 87 binary variables, 655 continuous ones, and 646 constraints. An optimal solution of $3592.2 was found in only 0.87 s by exploring 282 nodes. Units
T2
T1
T3
T4 INT3 (16.00) from V-104 T4 (46.67)
INT2 (28.00)
R-103
T5 T6 INT3 (5.33) from V-104 T4 (40.00) T3 (66.66)
INT2 (24.00) R-102
T2 (34.29) INT2 (28.00) T2 (40.00) INT1 (4.00) to V-103
R-101
2
INT3(61.33)
INT1 (10.29) INT3 (18.67) T1 (40.00) T1 (61.33) INT3 (21.33) INT1 (8.00) to V-104 INT1 (1.98) from V-103
2.250
0
INT2 (24.00)
3.750
5.417
4
Time (h)
6.917
6
Figure 3. Optimal schedule for the motivating example
References A. P. Barbosa-Póvoa and S. Macchietto, 1994, Detailed design of multipurpose batch plants, Comp. Chem. Eng., 18, 11/12, 1013-1042. E. Kondili, C. C. Pantelides, and W. H. Sargent, 1993, A general algorithm for short-term scheduling of batch operations-I. MILP formulation, Comp. Chem. Eng., 17, 2, 211-227. C. C. Pantelides, 1994, Unified frameworks for optimal process planning and scheduling. In: Foundations of computer-aided process operations, New York, 253-274.
8
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
85
Excipient Interaction Prediction: application of the Purdue Ontology for Pharmaceutical Engineering (POPE) Leaelaf Hailemariama, Pradeep Suresha, Venkata Pavan Kumar Akkisettya, Girish Joglekarb, Shuo-Huan Hsub, Ankur Jaine, Kenneth Morrisc, Gintaras Reklaitisa, Prabir Basud and Venkat Venkatasubramaniana1 a
School of Chemical Engineering, Purdue University, West Lafayette IN 47907 USA Discovery Park, Purdue University, West Lafayette, IN 47907 USA c Department of Industrial and Physical Pharmacy, Purdue University, 585 Purdue Mall, West Lafayette, IN 47907 USA d National Institute for Pharmaceutical Technology and Education, Purdue University, 315 Hovde Hall, 610 Purdue Mall, West Lafayette, IN 47907 USA e Enterprise Optimization, United Airlines, Chicago, IL 60007 USA b
Abstract A drug product consists of a drug substance and one or more excipients that play specific roles in rendering desired properties to that product, from improvement of flow to control of the release of the drug substance. Inter-excipient and drug substanceexcipient chemical reactions are to be avoided and formulators often use heuristics and past experience to avoid potential interactions during drug product development. Multiple tools are present to mechanistically predict chemical reactions: however their utility is limited due to the complexity of the domain and the need for explicit information. In this work, the Purdue Ontology for Pharmaceutical Engineering (POPE) was used to develop an excipient reaction prediction application that made use of structural, material and environmental information to predict reactions Keywords: Excipient Interaction, Product Development, Ontology, Rule Language
1. Introduction A drug product includes the drug substance along with compounds that enhance processing and effectiveness, called excipients, which perform such functions as improvement of flow or increase of tablet mass. The drug product is expected to be chemically stable to avoid formation of toxic compounds and loss of the drug substance: however reactions between the drug substance and excipients and amongst the excipients are possible. These interactions may be avoided by careful design based on experience, rigorous experimentation or using software packages to predict reactions. These packages include mechanistic tools and knowledge-based reaction prediction tools. Mechanistic tools that have been developed to predict reactions include the CAChe WorkSystem (see URL) and SPARTAN (see URL). Knowledge-based systems include reaction predictors like ROBIA (Reaction Outcomes By Informatics Analysis) 1
Corresponding author:
[email protected]
86
L. Hailemariam et al.
(Socorro et al, 2005) and the LHASA (Logic and Heuristics Applied to Synthetic Analysis) software (see URL). However, the current solutions to chemical reaction prediction have several limitations. Secondary and tertiary interactions are rarely considered and there is little work on chemistry reasoning which is valuable for chemical stability analysis but would require an explicit information model. In addition, there is little scope for integration of the reaction information (which might describe conditions in microsolutions found between solid particles) with the solid information. In this work a prototypical reaction prediction system which makes use of known reaction information, the molecular structure of reactants and structural and environmental information, like the backbone of the molecule and the reaction pH, is presented. First the POPE ontology, which includes descriptions of the material, chemical reaction and structure descriptors, is briefly presented. The next section is dedicated to the description of the prototype reaction prediction system, followed by application examples. The last section discusses other potential applications of the ontological approach and future work.
2. Introduction to the Purdue Ontology for Pharmaceutical Engineering Several options exist for the explicit representation of information. XML (eXtensible Markup Language: see URL) is one. XML does not have a fixed set of tags but allows users to define tags of their own, much like the English language versus Chemistry or Biology. An example of XML Schema (glossary) examples is the Chemistry Markup Language (CML: see URL) for molecule information. XML does not provide any means of defining the semantics (meaning) of the information. The needs for explicit expression and capture of semantics are met by ontologies, which are defined as follows: “An ontology defines the basic terms and relations comprising the vocabulary of a topic area as well as the rules of combining terms and relations to define extensions to the vocabulary.” (Gomez-Perez et al., 2004). For the pharmaceutical domain, the ‘basic terms’ could be a ‘material’ and a ‘material property’ and their relations could be ‘<material> has <material property>’. An example of a simple ontology is shown in Figure 1. Figure 1: An ontology example The powder flow rate (a material property) of the API (a material) has an average value of 1 g/s within the range of [0.8, 1.2]. The source of the reported value was the experiment ‘API: Flow Measurement’ at a given context (78% relative humidity) The collection of the different concepts e.g. material, material property etc and their relation e.g. has Value, comprise an ontology. The Purdue Ontology for Pharmaceutical Engineering (POPE) was developed to address the information modeling needs mentioned previously. POPE includes several smaller interrelated ontologies; the Purdue Ontology for Material Entities (POME)
Excipient Interaction Prediction: Application of the Purdue Ontology for Pharmaceutical Engineering (POPE)
87
which describes materials; the Purdue Ontology for Degradant Structures (PODS) which describes the chemical structure of materials with respect to molecular fragments; the Purdue Ontology for Reaction Expression (PORE) which describes the interactions between materials including chemical reactions; the Purdue Ontology for Material Properties (POMP) which describes the physical, chemical and mechanical properties of materials and the Purdue Ontology for Description of Experiments (PODE). 2.1. Material Ontology (POME) There had been some work done to describe materials in an explicit manner including the Standard for the Exchange of Product Data STEP (ISO 10303) and OntoCAPE, which included descriptions of phases, chemical components and reactions (Yang and Marquardt, 2004). However, in the data models above, experiments and solid properties get little treatment. POME builds on the concepts defined by OntoCAPE and includes solid and pharmaceutical properties. The material is described in terms of its substance entity (environment independent) and its phase system entity (environment dependent: solid, liquid, vapor, mixtures) and its role in a mixture (e.g. for solids: flow aid, dilunt etc). The phase system would be described by the fraction and identity of the phases comprising it (phase composition). Each phase would have a chemical composition, which describes the species and their relative abundance in the given phase as well as the environmental conditions e.g. temperature, pressure. For instance, the antibiotic Seromycin ® is manufactured as a tablet which may include several components like Cycloserine and Magnesium Stearate. The tablet is a solid mixture; the phase composition including phase, substance and amount information (e.g. Cycloserine: Solid: 83% m/m) and the role of Cycloserine being an Active Pharmaceutical Ingredient (API). The chemical composition describes a pure component. The substance aspect includes molecular structure information e.g. as a SMILES string (NC1CONC1=O). 2.2. Degradant Ontology (PODS) Previous work on representation of chemical structures includes the EcoCyc Ontology (http://ecocyc.org/) for metabolites and the Chemical Markup Language (CML) among others. Ontologies developed to describe molecules include those by Feldman et al (2005) and Villanueva-Rosales and Dumontier (2007). PODS builds on the above for the pharmaceutical domain by making use of common molecular fragments (shown in Figure 2). Each fragment is part of a ‘fragment-entity’ which might participate in a reaction and is connected to (or identified as) a backbone group. For Cycloserine, the fragment entities include a five- member ring, two amine groups and a carbonyl group. PODS can be coupled with the PORE to represent chemical systems and with POME to describe a material during product development. 2.3. Reaction Ontology (PORE) The concept of a reaction may include physical and chemical changes. Some work had been done previously to model chemical reactions including the EROS (Elaboration of Reactions for Organic Synthesis) system (Gasteiger et al, 2000) and work by Sankar and Aghila (2006). PORE was developed to represent reactions as interactions between functional groups/phase systems. Each reaction would have a reaction_context, which describes the pertinent descriptors of the reaction e.g. at what temperature it occurs, at
88
L. Hailemariam et al.
what pressure, pH etc. For instance, the context for Cycloserine hydrolysis captures the temperature (600C), pH range (1-7) and phase (liquid). Several restrictions such as the requirement of at least one reactant and one product for a reaction were put in place. 2.4. Property Ontology (POMP) Previous work on explicit modeling of material properties includes CAPEC (Sousa et al, 1999) and OntoCAPE (Yang and Marquardt, 2004). POMP extends the properties in OntoCAPE to include interproperty relations and solid material properties. The property structure includes generic properties like heat, mass and momentum transfer properties (e.g. heat capacity, diffusivity and density respectively) as well as a separate description for solid properties. Solid properties were described at three levels; substance properties (pertaining to the molecular level e.g. molecular structure), particle properties (pertaining to single crystals or amorphous particles e.g. unit cell dimensions) and powder (bulk) properties (e.g. particle size distribution). Each property value would be correlated to a set of environmental conditions during measurement (e.g. temperature, pressure) and a source (experiment, mathematical model or literature). 2.5. Experiment Ontology (PODE) Noy and Hafner (2000) developed a representation of molecular biology experiments using ontologies. Hughes et al (2004) developed a laboratory ontology which captured the relationship between materials and processes through a hierarchy of actions. PODE links experiments to material properties. Experiments have some generic characteristics which include the time and place of the experiment as well as the experimenters. Equipment and experimental procedures were modeled as a collection of actions, which could be observation /measurement actions, processing actions or operation actions. For instance the measurement of Cycloserine bulk density involves a specific experimental procedure (put powder on top of sieve: (processing action); turn on sieve (operation action); observe powder volume (observation step)).
3. Prediction of reactions between drug product components POPE had previously been used to support a decision support system for pharmaceutical product development and modeling of solid unit operations (Venkatasubramanian et al, 2006). In this application, reactions between the drug substance and the excipients are predicted through the following steps. A survey of the drug degradation domain was made and a set of common molecular fragments are collected as in Figure 2. Once the chemical structure of the new drug substance is known, the active fragments are sought through the Chemistry Development Kit (CDK) tools. Figure 2: List of molecular fragments
Excipient Interaction Prediction: Application of the Purdue Ontology for Pharmaceutical Engineering (POPE)
89
Reactions involving the identified active fragments are sought from among the reaction ontology instances which describe the participant active fragments. For user input including the molecular structure (described by PODS) and reaction conditions, the relevant reactions are returned. The reaction conditions would include the environment (temperature, pressure, pH: captured by PORE), phase information (described by POME and POMP) and reported experiment procedure (captured by PODE). The ontology was coded using OWL (Web Ontology Language) using the Protégé 3.3 interface. Search was performed using the Semantic Web Rule Language (SWRL) plugin of Protégé. The reaction database is populated from free online databases from SigmaAldrich® and Metasynthesis®. A schematic representation is shown in Figure 3.
Figure 3: Reaction prediction system (a) overall scheme (b) SWRL input The system was used to predict reactions for several drug compounds. For instance, the system correctly predicted the hydrolysis, oxidation and isomerization of Cycloserine based on the compound’s similarity to γ-Butyrolactone hydrolysis, Imipramine hydrochloride oxidation and Pilocarpine epimerization. Knowledge of the possibility of Cycloserine oxidation may exclude the use of Crospovidone, which has hydrogen peroxide, a strong oxidizing agent, as a common impurity. Capturing multiple types of information, possible through the ontological approach, is useful for interaction prediction in pharmaceutical product development.
4. Summary The Purdue Ontology for Pharmaceutical Engineering (POPE) was developed with its component ontologies for descriptions of materials, chemical structures, reactions, material properties and experiments. Based on POPE an excipient interaction prediction/diagnosis application which made use of structural and environmental information was presented. There are several challenges in the horizon, which include the consideration of rates of reaction to determine relevance and evaluation of multiple measures of molecular similarity.
Acknowledgements The work was done through the financial support of the Engineering Research Center for Structured Organic Particulate Systems (ERC-SOPS), the Indiana 21st Century Fund and Eli Lilly and Company. The authors thank Balachandra Krishnamurthy and researchers at Lilly Research Laboratories (Henry Havel, Brian Good, Gus Hartauer, Steve Baertschi, Ahmad Almaya, Aktham Aburub, and David Long) for their support.
90
L. Hailemariam et al.
References S. Baertschi (2005) Pharmaceutical Stress Testing: Predicting Drug Degradation in Drugs and the Pharmaceutical Sciences, Vol. 153, Taylor and Francis Group, Boca Raton FL. Cache: http://www.cache.fujitsu.com/ CML: http://www.xml-cml.org H. J. Feldman, M. Dumontier, S. Ling,., N Haider, C.W.V. Hogue (2005) CO: A Chemical Ontology for Identification of Functional Groups and Semantic Comparison of Small Molecules, FEBS Letters, 579, 4685-4691. J. Gasteiger, M. Pförtner, M. Sitzmann, R. Höllering, O. Sacher, T. Kostka, N. Karg (2000) Computer-assisted synthesis and reaction planning in combinatorial chemistry, Perspectives in Drug Discovery and Design, 20, 245–264. A. Gomez-Perez., M. Fernandez-Lopez, O. Corcho. (2004) Ontological Engineering: with examples from the areas of knowledge management, e-Commerce and the Semantic Web. Springer-Verlag London. G. Hughes, H. Mills, D. de Roure, J. Frey, L. Moreau, M.C. Schraefel, G. Smith, E. Zaluska (2004) The semantic smart laboratory: a system for supporting the chemical eScientist, Organic and Biomolecular Chemistry, 2, 1-10. LHASA: http://www.lhasalimited.org N. Noy, C. Hafner (2000) Ontological foundations for experimental science knowledge bases, Applied Artificial Intelligence, 14, 565-618. N. Pandit (2007) Introduction to the pharmaceutical sciences Lippincott, Williams and Wilkins, Baltimore, MD. P. Sankar, G.J. Aghila (2006) Design and development of chemical ontologies for reaction representation, Journal of Chemical Information and Modeling, 46, 6, 2355-2368. I.M. Socorro, K. Taylor and J.M. Goodman (2005) ROBIA: A Reaction Prediction Program, Organic Letters, 7, 16, 3541-3544. SPARTAN : http://www.additive-net.de/software/spartan/index.shtml V. Venkatasubramanian, C. Zhao, G. Joglekar, A. Jain, L. Hailemariam, P. Suresh, V. Akkisetty, K. Morris, G.V. Reklaitis (2006) Ontological Informatics Infrastructure for chemical product design and process development, Computers and Chemical Engineering, CPC 7 Special Issue, 30(10-12), 1482-1496. N. Villanueva-Rosales, M. Dumontier (2007) Describing chemical functional groups in OWL-DL for the classification of chemical compounds, OWL: Experiences and Directions (OWLED 2007), co-located with European Semantic Web Conference (ESWC2007), Innsbruck, Austria. XML: http://www.w3.org/XML/ A. Yang, W Marquardt (2004) An Ontology-based Approach to Conceptual Process Modeling In: A. Barbarosa-Póvoa, H. Matos (Eds.): European Symposium on Computer Aided Process Engineering -14, 1159-1164.
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
91
Optimal column sequencing for multicomponent mixtures Andreas Harwardt,a Sven Kossack,a Wolfgang Marquardt a a
Lehrstuhl für Prozesstechnik, RWTH Aachen, Templergraben 55, 52056 Aachen, Germany,
[email protected]
Abstract The separation of a multicomponent mixture using distillation is usually possible in a large number of different sequences, which will provide the same products but have different energy demand. In this contribution, we provide a systematic method to find the optimal column sequence based on exergy demand. The screening of design alternatives is done within a superstructure framework, which allows for the decomposition of the separation sequences into unique separation tasks. The use of the task concept significantly reduces the computational work. The individual separation tasks are evaluated using shortcut methods. For the application to azeotropic mixtures, the mixture topology is determined and feasibility checks are performed for every split. In this context, azeotropes are treated as pseudo-components. Keywords: sequence synthesis, multicomponent, rectification body method,
state task network 1. Introduction In distillation network synthesis, the separation of multicomponent mixtures is possible in a large number of different column sequences, where the sequences, although they result in the same products, have different energy demand. A nonoptimal choice of the separation sequence can lead to significant additional cost during the operation. Several approaches for column sequencing can be found in the literature. Hendry and Hughes [1] introduced the separation task concept, where the distillation network is decomposed into the individual separation tasks, which are evaluated using the ideal thermodynamic based UnderwoodFenske-Gilliland method. This idea was extended to complex distillation systems by Shah and Kokossis [2]. The idea of a superstructure for distillation column networks was introduced with the state task network by Sargent and Gaminibandara [3]. Thong and Jobson [4] suggested a sequential approach for the column sequencing for azeotropic mixtures. The major problem with column sequencing is the large number of possible sequences, which grows exponential by the number of products. This contribution presents a stepwise procedure to identify the optimal sequence.
92
A. Harwardt et al.
In the first step, the design alternatives are automatically generated using a superstructure. In the second step, the design alternatives are evaluated using the rectification body method (RBM) [5], a nonideal thermodynamic based shortcut method. Unlike simulation studies or MINLP optimization, shortcut methods allow fast evaluation of the single separation task without detailed specification of the distillation column. 2. Methodology 2.1. Zeotropic mixtures
Assuming a four component mixture and simple two product splits, Fig. 1 shows all possible separation sequences into the pure components under the assumption of sharp splits. If the number of components is increased, an exponential growth of the number of sequences is observed (Fig. 2, sequences). This behaviour is well known [6] and can be described by N=
(2(n − 1))! n!(n − 1)!
(1)
where n is the number of products and N is the number of sequences.
Figure 1: Sequence alternatives for the separation of a four component mixture
The same separation steps (same feed and product compositions) can occur in different sequences. This can be seen in Fig. 1, where the first and the second sequence have the first separation in common. This property is used in a superstructure to reduce the complexity of the multicomponent systems. The state task network [3] is applied. In this superstructure, every possible composition, which can be attained, is called a state. The states represent the feed, possible intermediate products and products of the separation sequence. A task is defined as an operation connecting three different states, the feed state and the two product states [1]. The tasks can be automatically generated by performing all possible separations of every state composition into the intermediate products or products. Every separation sequence can be seen as a
Optimal Column Sequencing for Multicomponent Mixtures
93
valid combination of tasks. A combination of tasks is valid if it starts with the feed state and ends at the product states. The application of the state task network requires the specification of linearly independent products. If products are linearly dependent, which in this case means that they could be attained by mixing other products, the state task network formulation is not applicable. This is due to the fact that the tasks would not be independent from the sequence. The main advantage of superstructure is that the number of tasks only grows with the third power of the number of products, compared to the exponential growth of the number of sequences (Fig.1) [2]. 500 Sequences Tasks
400
300
200
100
0 2
3
4
5
6
7
8
Components
Figure 2: Growth of the number of tasks and sequences
2.2. Azeotropic mixtures
The application of the superstructure for the separation of azeotropic mixtures requires some modifications. Separation is limited by azeotropes and the corresponding distillation boundaries, which form distillation regions [7]. For a feasible separation, top and bottom product composition have to be in the same distillation region. Boundary crossing (where the feed and the two product compositions are located in different distillation regions) is possible in the presence of curved distillation boundaries, but is not considered in this work. The required information about the distillation boundary is obtained from the pinch distillation boundary (PDB) feasibility test [8]. The information is stored in the reachability matrix, as introduced by Rooks et al. [9], which represents the topology of the residue curve map of the mixture. A feasible set of linear independent products has to be selected, where products can be pure components, azeotropes or a chosen product composition. This set is feasible if all products are part of the same distillation region. The singular points of a distillation region usually provide a good set of possible product compositions. The azeotropes are treated as pseudo-components.
94
A. Harwardt et al.
2.3. Shortcut calculations
The evaluation of a separation sequences requires information about the feasibility and the cost of the individual separation tasks. Determining the minimum energy demand of a separation has been found to be a good way of estimating the cost of a distillation system, because operation cost are dominated by the energy demand and investment cost are closely related to the vapor flow rate in the column [10]. The minimum energy demand can be calculated using the RBM shortcut. The feasibility of the individual separation tasks can be checked with the application of PDB feasibility test. The sequence evaluation is performed sequentially. At first, the superstructure including states and tasks is generated automatically. For every task, the PDB feasibility test is performed. If the split is feasible, the RBM calculates the minimum energy demand for the separation of the feed into the top and the bottom product. Once the minimum energy demand (QB) has been calculated, the exergy demand (EB) can be determined. The exergy of the energy represents the part of the energy that can be converted into mechanical energy using the ideal Carnot cycle. The required information about the reboiler temperature (TB) is provided by the RBM calculations. The evaluation based on the exergy demand accounts for the different temperature levels of the energy requirement. Once all task energy and exergy requirements have been calculated, the sequence energy and exergy demand is determined. The feasible sequences are automatically generated for the given number of products. Information about the active tasks for every single sequence is provided by the algorithm. The separation of the mixture into n products requires n-1 tasks. The sequences are found by combinatorial search with all identified tasks, where invalid branches of the combinatorial tree are cut to significantly reduce the computational demand. The sequence evaluation is done by the summation of the energy or the exergy demands of the active task of the sequence, which is computationally inexpensive. This summation is done for every sequence. After all sequence exergy demands have been calculated, the sequence with the lowest exergy demand is selected to be the optimal one. 3. Case studies In a first case study, the zeotropic mixture of pentane, hexane, heptane and octane is supposed to be separated into the pure components. Five different sequences are possible (Fig. 1), which have ten individual separation tasks. They are referenced as sequence one to five according to the labeling in the figure. Assuming a pressure of 1.013 bar, an equimolar feed and a total flowrate of 10 mol/s, the energy and exergy demands are calculated for the ten tasks using the RBM shortcut. Sequence five, which corresponds to the direct sequence, is found to be optimal. Obviously, the optimal sequence depends on
Optimal Column Sequencing for Multicomponent Mixtures
95
the feed composition. The sequence exergy requirement is calculated to be 157 kW, where the energy requirement is 637 kW. In a second case study, a zeotropic mixture is separated into ten products. The mixture contains the ten nalkanes from propane to dodecane. 4862 Sequences, with 165 shortcut calculations for the tasks, are evaluated in less than ten minutes (Windows 2003 Intel Xeon Dual 3.06 GHz 3840 MB RAM). In a third case study, the mixture of acetone, chloroform, benzene and toluene is investigated. Acetone and chloroform are known to form a high boiling azeotrope. The composition space is separated into two distillation regions. The superstructure is used to identify optimal sequences in both distillation regions. In this case, the feed is set to be of equimolar composition at a flowrate of 10 mol/s and a pressure of 1.013 bar. The separation takes place in the convex region of the composition space, which can be identified from the information in the reachability matrix. For the given feed composition all five separation sequences are feasible. Table 1 displays the task exergy (EB) and energy (QB) requirements for the separation using the RBM, the labeling corresponds to Fig.1. Table 1. Task energy and exergy requirements task #
feed
top
bottom
QB [kW]
EB [kW]
1
ABCD
ABC
D
366
91
2
ABCD
AB
CD
602
127
3
ABCD
A
BCD
242
42
4
ABC
AB
C
595
110
5
ABC
A
BC
257
40
6
AB
A
B
311
46
7
BCD
BC
D
329
82
8
BCD
B
CD
465
98
9
BC
B
C
476
88
10
CD
C
D
193
48
Table 2. Sequence energy and exergy requirements
active tasks
sequence #
QB [kW]
EB [kW]
6
1272
247
1
1
4
2
1
5
9
1100
219
3
2
6
10
1107
222
4
3
7
9
1047
211
5
3
8
10
900
188
96
A. Harwardt et al.
The reachable products are the pure components/pseudo-components of the convex distillation region, which are acetone (A), acetone/chloroform (B), benzene (C) and toluene (D). The information about the single task energy and exergy requirements provides a good insight in the behaviour of the system. The energy and exergy demand of a sequence can now easily be calculated by the summation of the energy and exergy demand of the present tasks of every sequence, the information is provided in Table 2. It can be seen, that in this case, sequence five, which consists of three direct splits, gives the optimal solution with the lowest exergy requirement. 4. Summary and conclusion This contribution aims to identify the optimal sequence for a distillation column network. The method for column sequencing presented here is based on ideas from previous contributions presented in the introduction. The application of a superstructure allows for the decomposition of the sequences into individual separation tasks, which significantly reduces the computational work. The use of the nonideal thermodynamic based RBM shortcut method has significant benefits over the use of the Underwood-Fenske-Gilliland method, since it allows the extension to azeotropic mixtures. The automatic generation of the superstructure and the fast evaluation with the shortcut allows the application on large systems up to 10 products (zeotropic system), which is significantly larger than other examples in the literature. Telling from the zeotropic and azeotropic case studies presented in this contribution, it can be seen that this superstructure generation and evaluation is a useful tool in distillation network design, because it allows for rapid evaluation of design alternatives. It provides a small selection of promising design alternatives, which can then be investigated in more detail. The method can be applied within the process syntheses framework [11] for process variant generation and evaluation.
References [1] Hendry, J.E., Hughes, R.R.: Chem. Eng. Prog. 1972, 68, 6, 71. [2] Shah, P.B., A.C. Kokossis: AIChE Journal 2002, 48, 527. [3] Sargent, R.W.H, K. Gaminibandara: Optimization in Action; L.C.W. Dixion, Ed.: Acadamic Press; London, 1976. [4] Thong, D.Y.C., Jobson, M.: Chem. Eng. Sci. 2001, 56, 4417. [5] Bausa J., R.v. Watzdorf, W. Marquardt: AIChE J. 1998, 44, 2181. [6] Thompson, R.W., C.J. King: AIChE J. 1972, 18, 941. [7] Doherty, M.F., M.F. Malone Conceptual Design of Distillation Systems, McGraw-Hill, New York, 2001. [8] Brüggemann, S.: PhD Thesis, RWTH Aachen 2005. [9] Rooks, R.E., V. Julka, M.F. Doherty, M.F. Malone: AIChE J. 1998, 44, 1382. [10] Bausa, J.: , PhD Thesis, RWTH Aachen 2001. [11] Kossack, S., K. Krämer, W. Marquardt: submitted to Chem. Eng. Res. Dev.
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
97
Systematic Design of Production Processes for Enantiomers with Integration of Chromatography and Racemisation Reactions Malte Kaspereit,a Javier García Palacios,a Tania Meixús Fernández,a Achim Kienle a,b a
Max-Planck-Institut für Dynamik komplexer technischer Systeme, Sandtorstr. 1, D-39106 Magdeburg, Germany b Otto-von-Guericke Universität, Lehrstuhl für Automatisierung/Modellbildung, Universitätsplatz 2, D-39106 Magdeburg, Germany
Abstract A systematic study is performed of integrated processes that combine chromatographic separation and racemisation reaction for production of pure enantiomers. In a theoretical case study, processes of different degrees of integration are investigated by optimization of corresponding models. Concepts studied range from reactor-separator-recycle systems to fully integrated schemes with distributed reactivity. Physico-chemical parameters were determined experimentally for a model system. Data are reported together with first results for a simple flowsheet-integrated process. Keywords: process integration, chromatography, racemisation, enantiomers
1. Introduction Enantiomers are stereoisomers structured like mirror-images (see Fig. 1). A main problem related to producing a pure single enantiomer is that selective synthesis is often not feasible or too expensive. In contrast, conventional synthetic procedures are less expensive but non-selective (they deliver the racemic 1:1 mixture). Since usually only one enantiomer has the desired physiological effect (the other might be ineffective or harmful), such mixtures need to be separated; for example, by kinetic resolution, crystallisation, or chromatography. However, the yield achievable by this approach is inherently limited to 50% only. a
a C b
d c
A
C
d
b
c
B
Figure 1: Schematic representation of two enantiomers (here denoted as A and B). The two forms differ only in the spatial arrangement of the functional groups
Against this background it appears highly desirable to combine enantioseparations with an interconversion (racemisation) of the undesired enantiomer. Ideally, this should allow for a yield of 100%. Since racemisations are equilibrium-limited (with 1:1
M. Kaspereit et al.
98
equilibrium composition), process integration appears as viable concept. Here we will investigate processes that combine (continuous) chromatography and racemisation.
2. Theoretical Case Study 2.1. Problem statement Fig. 2 shows the task to be resolved by the processes considered here. The constraints resemble a pharmaceutical problem, where purity requirements are very high and – due to significant synthesis costs – a high conversion of the undesired form is desirable. (continuous) chromatography
50% A 50% B
≥ 99.9% A 0.1% B
racemisation A'B
Figure 2: Schematic problem statement for the production of enantiomer A.
Subject of the study are integrated processes without waste stream that yield the desired enantiomer with 99.9% purity. This corresponds to a conversion of 99.8%. Further, also a less restrictive case is investigated (90% purity and 80% conversion). Mail goal is here to identify general trends with respect to integrating continuous chromatography and racemisation. Therefore, we consider a countercurrent of stationary and mobile phases (i.e., True Moving Bed, TMB). While a feasible technology would require column switching (i.e., Simulated Moving Bed, SMB), the development of such system is out of scope here. Details on TMB/SMB systems are given in, e.g., [1]. 2.2. Processes investigated There is a rather large number of options to integrate continuous chromatography and racemisation reaction. Fig. 3 shows a selection of possible schemes for the production of the weaker adsorbing enantiomer A. a)
S SR
F
A
c)
S
b)
S
F
A
d)
S
reaction
separation
F
SR
F
A
A
reaction & separation
Figure 3: Selected schemes for the production of A (F – feed, S – solvent, SR – solvent removed). a) Reactor-separator-recycle system w/ four zones and solvent removal. b) Partially integrated process w/ three zones and side reactors. c) Fully integrated process w/ four zones, distributed reaction and solvent removal. d) Fully integrated scheme w/ three zones and distributed reaction.
Concerning the level of integration, classical flowsheet-integrated processes as reactorseparator-recycle systems (Fig. 3a) and the use of side reactors (“Hashimoto process”,
Systematic Design of Production Processes for Enantiomers
99
Fig. 3b) are considered. Furthermore, fully integrated schemes are possible (i.e., chromatographic reactors). While one option is to apply a constant reaction rate parameter (i.e., Damköhler number, Da) throughout the unit, here we also consider the option to use different values for Da in the individual zones (Fig. 3c). Finally, since four-zone processes require a recycle (and the removal of solvent), also integrated processes with three zones are studied (Fig. 3d). Please note that here we focus on the schemes shown in Fig. 3 (and their corresponding “counterparts” for the production of enantiomer B). However, there are more options. For example, a four-zone Hashimoto system with internal recycles was suggested [2]. 2.3. Process model and optimisations All processes are modeled as series of countercurrent equilibrium cells. Parameters were determined experimentally (section 3). A liquid-phase reaction is accounted for by Da = (rate constant)x(cell volume)/(solid flow rate). Adsorption is described by the biLangmuir model. All equations were implemented in the simulation environment DIVA [3]; details on the implementation of a largely analogous model can be found in [1,4]. The following set of performance parameters were used to evaluate each process: ⋅ ⋅ ½ ⋅ ciout V SR ° VS ° out out , = , = , = SR PR V c EC ® Pi = out ¾ i PR ° PR c A + c Bout °¯ ¿
i = ( A, B)
(1)
with purity Pi, productivity PR, specific eluent consumption EC, specific solvent removal SR, and ciout as product concentrations. Note that PR can be scaled by the solid volumetric flow (here equal to unity). Furthermore, solvent removal is assumed ideal (i.e., no losses, obtains feed concentration level for higher concentrated solute) and that side reactors (Fig. 3a and 3c) are in reaction equilibrium. Optimisations were performed using an SQP algorithm in DIVA with EC as objective function and the purity as nonlinear constraint. Variables were Da-numbers and the relative zone flow rates, m j ( j=I...IV) (i.e., ratio of liquid and solid flow in each zone). 2.4. Results Table 1 lists the obtained optimisation results for the process schemes in Fig. 3. As expected, the conventional setup a) is a feasible option. It performs somewhat better for the strongly adsorbed component B. The reason is that for producing A, the recycle load is higher due to the strongly diluted stream of B at the extract port. The Hashimoto process (b) was found to be infeasible for 99.9% purity. In fact, the process is thermodynamically infeasible for the production of pure A. The scheme achieves only low performance for 90% purity. This is in agreement with literature [2]. The hypothetical option of a fully integrated process with distributed reactivity (c) allows for a significant improvement of process performance. This holds in particular for component A, where SR and EC are strongly reduced. The main reason is that here the required m I –value is 16% lower than in case (a); m I is even lower than the Henry constant of B. The explanation is that any B in the reactive zone I also reacts to produce A, which is desorbed more easily and transported towards the non-reactive zones. A similar benefical effect (which is somewhat less pronounced) is found for m IV, which is higher for the fully integrated schemes than for the flowsheet-integrated processes. As a last option, integrated three-zone processes (d) were studied. These cannot achieve a purity of 99.9%. However, a comparison of the results for 90% purity demonstrates a significant potential. Considering that these schemes have no recycle or solvent removal, they appear very attractive for tasks with limited purity requirements.
M. Kaspereit et al.
100
Table 1: Optimisation results for the process options shown in Fig. 3. The first column marks the process scheme according for Fig. 3 and the target component. *) PR is scaleable by solid flux. P [%] 99.9 99.9 90.0 90.0 99.9 90.0 90.0 99.9 99.9 90.0 90.0 99.9 90.0 90.0
a) A a) B a) A a) B b) b) A b) B c) A c) B c) A c) B d) d) A d) B
m I / Da I [-] 23.47 / 19.33 / 19.47 / 18.03 / -
m II / Da II [-] 11.54 / 14.71 / 10.58 / 12.57 / -
m III / Da III m IV / Da IV EC [-] [-] [l/g] 17.34 / 13.26 / 11.7 20.22 / 12.24 / 9.67 18.67 / 13.54 / 5.30 20.41 / 13.20 / 5.01 not feasible 18.97 19.85 13.63 16.8 20.51 13.54 14.84 12.2 -4 -18 -18 19.69 / 1039 11.69 / 10 17.24 / 10 12.26 / 10 8.54 22.69 / 10-16 14.62 / 10-11 20.55 / 10- 3 15.05 / 10 9 8.94 16.37 / 1068 11.25 / 10- 4 18.49 / 10-18 13.09 / 10-18 2.87 19.29 / 10-18 13.03 / 10-18 20.56 / 10- 4 15.54 / 10 9 3.61 not feasible (max. PA= 98.9%, max. PB = 99.4%) 16.65 / 4061 19.04 / 10-18 13.08 / 10-18 4.19 19.85 / 10-18 12.79 / 10-18 15.68 / 458 4.10
SR [l/g] 9.54 5.56 3.50 2.13
PR [g/l]* 0.87 0.77 1.12 0.96
0 0 3.87 4.40 0.93 0.36
0.32 0.47 0.87 0.85 1.14 1.04
0 0
0.85 1.02
3. Investigations for a model system The model substance used in this work is chlorthalidone (CT), which has (in racemic form) some use as a diuretic and anti-hypertensive drug. CT is stereolabile (i.e., it can be racemised rather easily) [5]. Chemicals were purchased from Merck (Darmstadt, Germany), with the exception of CT (Sigma Aldrich, Steinheim, Germany). 3.1. Chromatographic parameters Experiments were performed using an analytical column (200x4mm) with a chiral stationary phase (Nucleodex β-OH, Macherey-Nagel, Germany) at 10°C with a flow rate of 0.5 ml/min. The mobile phase was 40/60 (v/v) methanol/water, 50mmol triethylamine at pH=5.0 (acetic acid). Conventional HPLC equipment was applied (Knauer, Berlin, Germany and DIONEX, Idstein, Germany). The porosity was determined from an acetone pulse. NTP-values were determined from small injections of 0.4 g/l racemic CT in mobile phase (corresponds to solubility). 0.4 0.3 c i [g/l]
t R,i [min]
16 14 12 10
0.2 0.1
0
0.05
0.1 0.15 c i [g/l]
0.2
0 10
20
30 t [min]
40
50
Figure 4: Determination of adsorption isotherms. Left – perturbation data and corresponding fit by isotherm model (lines). Right – overloading experiments (points, injection volume: 0.13...5ml) and simulations (lines).
Systematic Design of Production Processes for Enantiomers
101
Adsorption isotherms of the bi-Langmuir-type were measured (see Tab. 2). An initial set of parameters was obtained by the perturbation method [6]. Subsequently, a “peak fitting” approach based on the equilibrium-dispersive model was used for refinement (for details, see [4]). Fig. 4 shows a good agreement between models and experiments. 3.2. Kinetics of racemisation reaction The thermal racemisation of CT was investigated using batch experiments. Since CT is available only in racemic form, first purified fractions (ca. 2ml each) were obtained from HPLC runs, which then were allowed to racemise at different temperatures (15°C to 60°C). Samples were taken for HPLC analysis. Fig. 5 (left) shows an example data set. -6
4
-8
3
ln k
c i [10-5 mol l-1]
5
2
-12
1 0
-10
0
100 200 t [min]
-14 29
300
31 33 1/T [10-4 K-1]
35
Figure 5: Left – example of a batch racemisation experiment at 40°C. Symbols: concentrations of the enantiomers (HPLC analysis). Lines: calculated from Eq. (2). Right – Arrhenius diagram obtained from batch experiments between 15°C and 60°C.
Data were fitted by adjusting the rate constant of the first-order kinetic expression
c1 (t ) =
c10 + c20 § 0 c10 + c20 · ¸ exp(− 2kt ) + ¨¨ c1 − 2 2 ¸¹ ©
(2)
Fig. 5 (right) shows the resulting Arrhenius plot from which activation parameters were determined (Tab. 2). Fig. 5 (left) shows the resulting fit obtained from these parameters and the rate expression (2). A good agreement was obtained for all experiments. Table 2: Summary of experimentally obtained parameters for chromatography and racemisation. Adsorption isotherms I
II
I
II
qS / qS bi / bi
length / diameter / porosity
B
A 94,17 / 0,244 20cm / 0,4 cm / 0,796
number of theoretical plates Racemisation kinetics
0,207 / 6,395
0,141 / 3,192 680 12 -1
k0 =3,77⋅10 s
/ EA = 99,9 kJ/mol
3.3. Recycling chromatography combined with thermal racemisation The above theoretical study shows that it is useful to fully integrate racemisation and continuous chromatography. However, corresponding technology is not yet available. Since the conventional reactor-separator setup was demonstrated to be feasible, as a first step single-column recycling chromatography was investigated experimentally. A thermostatted CSTR (40°C) was connected to the column in a recycle setup. A part of the front of each chromatogram was collected as product A; the rest was recycled to the
M. Kaspereit et al.
102
reactor. To maximise productivity, the process was operated in “touching band” mode. Due to dispersion in the system, the product average product purity achieved was 95%. Reactor concentrations remained close to the 1:1 mixture. Since no solvent removal could be used at this small scale the process expectedly suffered from strong dilution. 100
5 0
0
10 cycle
20
100 yield [%]
10
EC [l/g]
PR [g/d/l]
15
50
0
0
10 cycle
20
50
0
0
10 cycle
20
Figure 6: Performance of single-column recycling with (open symbols) and without solvent removal (filled) in comparison to an SMB-based process with ISR in steady state (dashed lines).
Fig. 6 shows performance predictions obtained with the equilibrium-dispersive model for such single-column recycling with and without ideal solvent removal (ISR). The same requirements were used as in section 3. The process is basically infeasible without ISR. Also shown is the steady state performance of an SMB-based process (6 columns, ISR, cf. Fig. 3a). As is often found, the SMB process achieves a lower productivity, but at the same time allows for significantly lower solvent consumption.
4. Summary For the production of pure enantiomers from racemic mixtures it is desirable to combine the enantioseparation with an interconversion (racemisation) of the undesired form. Corresponding concepts that integrate chromatography and racemisation were studied theoretically, ranging from classical flowsheet integration to fully integrated processes with distributed reactivity. The latter options – although being hypothetical – have a significantly improved performance. However, it was also found that internal recycles and solvent removal are necessary if high purity is required. Parameters for racemisation kinetics and chromatographic separation of a model system were determined experimentally. Model predictions and first-stage experiments were performed for flowsheet integrated processes. Single-column systems were found to be an interesting alternative to SMB-based schemes. Current work focuses on theoretical investigations of further process schemes under a broader range of product and problem specifications. Furthermore, technological options are studied for fully integrated processes and intermediate solvent removal.
References [1] M. Kaspereit et al., J. Chromatogr. A (2007) 2 – 13 [2] T. Borren, Untersuchungen zu chromatographischen Reaktoren mit verteilten Funktionalitäten, PhD thesis, VDI Verlag, Düsseldorf, Germany, 2007 [3] M. Mangold et al., Chem. Eng. Sci. 55 (2000) 441 – 454 [4] M. Kaspereit, Separation of Enantiomers by a Process Combination of Chromatography and Crystallisation, PhD thesis, Shaker Verlag, Aachen, Germany, 2006 [5] K. Cabrera et al., J. Chromatogr. A 731 (1996) 315 – 321 [6] C. Blümel et al., J. Chromatogr. A 865 (1999) 51 – 71.
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
103
The Application Of A Task-Based Concept For The Design Of Innovative Industrial Crystallizers Richard Lakervelda, Herman J.M. Kramera, Peter J. Jansensa, Johan Grievinka a
Delft University of Technology, Leeghwaterstraat 44, 2628 CA Delft, The Netherlands
Abstract There is a need for a more synthesis-focused design approach for industrial crystallizers. In this paper a new task based design approach is applied to design a crystallization process unit. The approach aims to conceptually build-up the crystallization process from fundamental building blocks called physical tasks. Two lines of research are followed. First of all, the design and key results of several small scale experiments are discussed which demonstrate practical feasibility of the concept by isolating single tasks. Secondly, a model of a task based crystallizer consisting of two compartments has been developed. A dynamic optimization of the model shows that tight specifications on product quality can be achieved, because it is possible to control tasks independently from each other. This increase in flexibility for design and operation is of significant value for the development of future crystallizers. Keywords: Crystallization, Process synthesis, Task based design, Process optimization.
1. Introduction Crystallization is one of the oldest and economically most important separation technologies in chemical industry. The design of crystallization processes is complicated compared to liquid processes, because besides purity also properties like shape, polymorphic form and size distribution have to be taken into account. The selection of crystallisation equipment is traditionally done from a limited number of state-of-art industrial crystallizers followed by optimization of that particular type of equipment. This reduces the design space and creative input of a designer. This contribution discusses the application of a novel approach for the conceptual design of crystallization process units, which is called a task based design approach [1]. The aim of the work is twofold. Small scale experiments illustrate that by combining several technologies the task based design approach can be realized in practice. Secondly, a model based optimization study aims to illustrate the increase in flexibility for design and operation.
2. Task based design approach Current industrial crystallizers facilitate many physical phenomena. The control over each of these individual physical phenomena is not possible because in present industrial crystallizers these phenomena are strongly entangled. To improve on these drawbacks a more functionally-driven design approach is proposed called task-based design [1]. In the task-based design approach an attempt is made to conceptually construct the crystallization process from fundamental building blocks called physical tasks. A task is a design concept indicating a preferred change in the state of matter to a target state, to be effected by means of a physical or chemical event under a specified range of operating conditions and kinetics. The concept shows similarities with the state
104
R. Lakerveld et al.
task network as was introduced by Kondili et. al [2] for process scheduling. Tasks can be connected in a network to accomplish the complete transition of a given feed into a desired product. The aim is to generate alternative ways of structuring the tasks, leading to a task superstructure that contains all possible and relevant tasks and their interconnectivity. Optimization of the task superstructure can be realized based on product quality, throughput or economic evaluation of the process and can be dependent on design constraints. The task based design approach is more flexible than traditional design approaches and allows for the optimization of individual crystallisation tasks. In this way a larger solution space is created which is needed to improve product quality.
3. Experimental isolation of single crystallization tasks One of the key challenges of the development of a task based design approach for crystallization processes is the ability to control crystallization tasks independently from each other, which makes optimization of that particular task possible. To demonstrate the practical feasibility of the approach an experimental program has been designed and conducted. The objectives of the experimental work are as follows: 1. Minimize attrition as it competes with growth 2. Keep supersaturation below nucleation threshold to isolate crystal growth 3. Evaluate technology which can induce nucleation at low supersaturation The next three sections discuss experiments which are each dedicated to one of these objectives. The focus will be on the design of the experiments and key results. 3.1. Experimental isolation of task crystal growth by minimizing attrition The setup that was selected to minimize attrition consists of a bubble column in which supersaturation is created by simultaneous cooling and evaporation of the solvent by sparging air. The crystals are kept in suspension by the upward velocity of the bubbles, eliminating the need for a stirrer or a circulation pump. In this way attrition caused by crystal-impeller collisions is absent. Seeded batch experiments on lab-scale show the feasibility of the concept by comparing the growth of a seeded population with so-called ideal growth behaviour. Ideal growth behaviour means that the number of crystals stays constant during the batch. In that case the final product size reaches a maximum, which can be estimated by setting up a mass balance over the seed population [3]. The results from the bubble column show a different trend compared to agitated crystallizers. In particular it can be said that the results are much closer to ideal growth behaviour, which means that the number of crystals stay constant during the batch and attrition is indeed minimized [4]. 3.2. Experimental isolation of task Supersaturation Generation with membranes The second objective of the experimental work is related to tight control of supersaturation at any place in a future crystallizer to prevent spontaneous nucleation bursts and to maximize crystal growth. Membranes offer an interesting opportunity to control supersaturation gradients in new crystallizer designs as a designer can move a boiling zone to any desired place. Furthermore additional process actuators are available by changing the conditions around a membrane, for example pressure or osmotic pressure at the permeate side in case of reverse osmosis. An experimental setup has been constructed and tested to assess the potential application of membranes for crystallization processes (Figure 1).
Application of a Task-Based Concept for Design of Innovative Industrial Crystallizers
105
flux [ kg m-2 h-1]
16
12
8
4
0 0
4
8
12
16
time [hours]
Figure 1: Process flow diagram setup combining crystallization and membranes
Figure 2: Measured flux for four successive experiments
It is concluded that a stable flux of approximately 2.5 kg m-2 h-1 can be achieved (Figure 2). This value will be an important input for the optimization studies of the design of a task based crystallizer in the next section. 3.3. Experimental isolation of task nucleation by using ultrasound Ultrasound is an interesting tool to induce nucleation at low supersaturation in a controlled way. It can be used to produce a large amount of nuclei with a narrow monodispersed distribution by applying pressure as a driving force [5]. An ultrasound generator is placed inside a supersaturated solution. An Ultrasonic field is applied for 2 minutes at various power inputs. The supersaturation is low to avoid spontaneous nucleation. The objective of the experiments is to evaluate the reproducibility of the production of nuclei and to relate the power output to the number of nuclei produced. During each experiment crystals were observed approximately one minute after insonation. It is concluded that nuclei can be generated at low supersaturation with a nucleation rate that is constant and not very sensitive for power input (Figure 3). The value of the nucleation rate will be used in the optimization studies. Produced crystals [#]
1.E+08
1.E+07
Gas Solvent
1.E+06
I
Ultrasound
M/L
G/L/S
1.E+05 40
50
60
70
80
Gas
Power input [W/l]
Figure 3: Measured number of crystals as function of ultrasonic power input.
I
Figure 4: compartmental structure task based crystallizer
4. Modeling and optimization of a task based crystallizer The experiments described in the previous chapter aim to demonstrate that the task based design approach is practically a feasible approach. Single crystallization tasks can be isolated, which makes optimization of that particular task possible. Combination of the technologies allows for the construction of a task based crystallizer in which each of the tasks can be controlled independently from each other. In this chapter an example of such a crystallizer is modeled and optimized.
106
R. Lakerveld et al.
4.1. Modeling of a task based crystallizer A schematic drawing of the modeled system is given in figure 4. It involves a compartment with gas, liquid and solid phase which is used to grow crystals with negligible attrition. From this compartment a clear solution is taken which is fed to a second compartment which contains a membrane surface which is used to selectively remove solvent. Ultrasound can be applied within the GLS compartment to produce nuclei also at low supersaturation and with a constant rate. The system is operated in batch mode. The model will be used in an inverse problem and there exists a large difference in order of magnitude between the values of the moments of the crystal size distribution. Therefore special attention has been paid to proper scaling and simplification of the model. Therefore, instead of the full population balance the moments of the distribution are used, which yields a set of ordinary differential equations. The equations of the GLS compartment are written into dimensionless form to obtain a better scaled model. The component mass balance for the GLS compartment and the total mass and component balance for the ML compartment complete the model. This yields the following set of equations, where x0, .., x4 represent the scaled moments, y is the dimensionless solute concentration, İ is the liquid fraction and ș is the dimensionless time.
dx0 dT
K uD ,
dyGLS dT
UL
1
H
dVML dT
dx1 dT
yGLS x0 ,
dx2 dT
2 yGLS x1 , dH dT
1
yML yGLS J yGLS H
J AM W GLS
,
I
dCML dT
dx3 dT
VML
3 yGLS x2 ,
,H
dx4 dT
4 yGLS x3
1 kV x3
CGLS CML W GLS
(3)
(4)
CML dVML VML dT
(5)
Where Į represents the scaled nucleation rate, ȕ a growth rate constant, c0 and c* a reference and saturated concentration respectively, Ȗ is a dimensionless crystal density:
D
B W GLS E
3
E
0
* TGLS
kGW GLS c c
J
Ucrystal cT*
GLS
0
* TGLS
c c
W GLS
VGLS
I
(6)
The dimensionless state variables are defined as follows:
x0
yGLS
m0 E 3 , x1
m1E 2 , x2
cGLS cT*GLS c 0 cT*GLS
, yML
m2 E , x3
cML cT*GLS c 0 cT*GLS
m3 , x4
m4 E 1
(7)
(8)
4.2. Base case simulation The model of the task based crystallizer having two compartments has been implemented in gPROMS Modelbuilder 3.0.0. (PSE Enterprise, London). A base case simulation has been done with the settings as given in Table 1. The initial values correspond in both vessels to a clear saturated liquid.
Application of a Task-Based Concept for Design of Innovative Industrial Crystallizers
107
Table 1. Fixing degrees of freedom for base case simulation Parameter VML(t = 0) VGLS
Value
Unit
0.005
3
Physical meaning
m
Volume ML compartment
3
0.005
m
Volume GLS compartment -2
-1
J
2.5
kg m h
Mass flux from experiments (Figure 2)
Am
0.192
m2
Membrane surface area
B
3.5.108
# m-3 s-1
Maximum nucleation rate (Figure 3)
TGLS
298
K
Temperature GLS compartment
TML
323
K
Temperature ML compartment
ȝU
0.2 (t < 500 s)
-
20% of the reactor is insonated for 500s
0.0 (t > 500s) ij
l min-1
0.6 .
kG
6.0 10
-9
Flow rate between compartments
4 -1
-1
m s kg
-
The results of the base case simulation are depicted in Figure 5 and 6. It can be seen that crystals with a mean size of 265 ȝm can be produced with a solid fraction of 27%. The supersaturation and growth rate show a peak in the beginning which can be explained by the supersaturation build up from the increasing concentration in the ML compartment and supersaturation consumption by the increasing crystal surface area. 300
40
0.9
30 20
0.8
1.6 Mean size Supersaturation
Mean size [um]
50
1.2 200 0.8 100 0.4
10 0
0.7 0
2
4 Time [h] 6
8
Figure 5: Growth rate and liquid fraction in GLS compartment for the base case
0
Supersaturation [%]
1 Growth rate liquid fraction
liquid fraction [-]
Growth rate [nm/s]
60
0 0
2
4 Time [h] 6
8
Figure 6: Mean size and Supersaturation in GLS compartment for the base case
4.3. Model based optimization of a task based crystallizer The base case simulation can be optimized by introducing an objective function and by adding constraints to the model. The objective function of the dynamic optimization is the crystal mean size (m4/m3). The following constraints are subject to the simulation in addition to those indicating limits of the physical possible domain: x G = kg(C – C*) < 15.10-9 m s-1 (maximum growth rate, minimize defects) < 592 kg m-3 (prevent scaling on membrane surface) x CML = 0.75 (minimum liquid fraction) x İ(t = tend) The manipulated variables for the optimization are the mass flux over the membrane (J) and the ultrasound utilization (ȘU). Figure 7 shows the optimal trajectories of the manipulated variables. The results illustrate the strength of the task based design approach. In this case a very tight constraint on the growth rate has been imposed. It can be seen how both the flux and the utilization of ultrasound work together to maximize the crystal mean size. In the initial phase the ultrasound and flux are both high to create
108
R. Lakerveld et al.
quickly a crystal population that can consume supersaturation and push the growth rate to its constraint (Figure 8). As the growth rate approaches the constraint the flux drops to reduce the supersaturation. At this point the utilization of ultrasound is still high to increase the surface area in the GLS compartment. As the crystals start to grow and consume more supersaturation, the flux can increase and the utilization of ultrasound can decrease to create less nuclei and therefore increase the mean size. Note that the total amount of solvent that has to be removed, which is proportional to the surface below the flux, is fixed because there is a constraint on the production. The flux therefore only has limited flexibility to force the growth rate below the constraint. It is possible to achieve the constraint on product quality, because now we are able to manipulate the task nucleation in addition to the task supersaturation generation. It should be noted that all the degrees of freedom are not explored yet, but already for this simple case a significant improvement in flexibility for design and operation is found. 20 Flux
16 12
Mean size [um]
1.5
10
8
0.5
4
40
0
0
0
1
2 Time [h] 3
4
Figure 7: Flux and insonation fraction maximizing mean size (only first 4 hours)
15
120
1
0
Mean size [um] Growth rate [m/s]
160
Fraction insonated
eta [%]
Flux [kg/m2/h]
2
20
200
80 5
Growth rate [nm/s]
2.5
0 0
2
4 Time [h] 6
8
Figure 8: Mean size (objective function) and growth rate (limiting constraint).
5. Conclusions In this paper a task based design approach is applied for the design of crystallization process units. The task based design approach considers fundamental crystallization tasks as building blocks for design. An experimental program and equipment have been identified which allows for the isolation of single crystallization tasks. It shows that the task based design approach is practically feasible. The experimental results are input for modeling and optimization of the design of a task based crystallizer, which consists of two compartments with different thermodynamic phases. A compartment in which the task crystal growth and nucleation are executed is connected to a compartment in which the task supersaturation generation can be executed. A dynamic optimization study shows that tight constraints on product quality can be achieved, because tasks can be controlled independently from each other. It allows for the design of novel crystallization equipment with improved flexiblity to manipulate product quality.
References [1] Menon, A.R. and A.A. Pande and H.J.M. Kramer and J. Grievink and P.J. Jansens, Ind.Eng.Chem.Res., 46 (2007) 3979 [2] E. Kondili and C.C. Pantelides and R.W.H. Sargent. Computers chem. Engng (1993), 17, 211 [3] N. Doki and N. Kubota and A. Sato et al., AIChE 45 (1999) 2527 [4] R. Lakerveld and A.N. Kalbasenka and H.J.M. Kramer and P.J. Jansens and J. Grievink, Proceedings of 14th Internationcal Workshop on Industrial Crystallization (2007) 221 [5] C. Virone and H.J.M. Kramer and G.M. van Rosmalen et al. Journal of Crystal Growth 294 (2006) 9
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
109
Cell Cycle Modelling for Off-line Dynamic Optimisation of Mammalian Cultures Carolyn M. Lam,a Kansuporn Sriyudthsak,a Cleo Kontoravdi,a Krunal Kothari,a Hee-Ho Park,a Efstratios N. Pistikopoulos,a Athanasios Mantalarisa a
Centre for Process Systems Engineering, Dept. of Chem. Eng., Imperial College London, South Kensington Campus SW7 2AZ, UK.
Abstract Mammalian cell cultures producing high-value biopharmaceuticals are expensive and time-consuming to study due to their exclusive dependence on experimentation. A mathematical model has been developed that describes batch/fed-batch hybridoma suspension cultures under normal and chemically-arrested conditions, which is also used to optimise the fed-batch cultures. The optimised strategy was tested experimentally demonstrating that product concentration was closely predicted though the viable cell concentration was partly underestimated. Overall, the model has assisted in reducing the number of experiments required to determine optimal cell culture conditions. Further work is required to improve the model predictability. Keywords: mammalian, hybridoma, off-line, modelling, optimisation.
1. Introduction Biologicals, such as monoclonal antibodies (MAbs), are important drugs for the treatment of various diseases. The global market for MAbs is projected to increase to US$16.7 billion in 2008 (Reichert and Pavlou 2004). Mammalian cells are the preferred expression system in order to achieve functional products. However, large infrastructure investments, high costs of experimentation and long cultures necessitate the reduction in costs and time-to-market. Once the best cell-line and media composition have been selected, the feeding strategy for fed-batch cultures would need to be optimised to maximise the production potential of the cell culture. Continuous improvements in mammalian culture technologies are also important to maintain their competitiveness versus other alternatives such as transgenic plants and animals (Ma et al., 2003; Dyck et al., 2003). Modelling offers advantages in providing insight into the production process and guiding experimentation, thus elimination any unnecessary experiments. Furthermore, it also enables in silico determination of best and worst case scenarios, which help focusing resources on beneficial trials. In this study, modelling of a hybridoma suspension culture based on first principles for off-line optimisation of time-varying process strategies was performed. By tracking the population in various phases of the cell cycle (G0/G1, S, and G2/M), the specific productivity of each sub-population was taken into account, which reflected the culture’s intrinsic properties more accurately.
2. Materials and Methods 2.1. Batch and Fed-Batch Cultures The mouse-mouse hybridoma CRL-1606 cell line producing IgG1 monoclonal antibody (MAb) against human fibronectin was obtained from ATCC. Batch cultures
110
C.M. Lam et al.
were inoculated at 1.5-2.0x105 cell ml-1 in 100ml medium containing DMEM with 25mM glucose and 4mM glutamine (GIBCO), 2.5% CBS (ATCC) and 1% Pen-Strep (GIBCO) in shake-flask incubated at 37oC and 5% CO2. Samples were taken every 8 h. Three out of six batch cultures were arrested with 0.5% DMSO (Wang et al., 2004) at 44 h. A fed-batch culture was first tested in triplicates with the same initial conditions as the batch cultures and concentrated glutamine (Sigma) at 200 mM was added twice a day. Three sets of triplicate fed-batch cultures were then performed following an optimised feeding strategy with three different cell cycle-arrest times at 78 h, 96 h, and 126 h respectively. The feed contained DMEM (GIBCO) with 200mM glutamine and 500mM glucose (Sigma). 2.2. Cell Culture Analyses Cell concentration and viability were measured with a Neubauer haemocytometer (Assistant, Germany) and trypan-blue (Sigma). Glucose, glutamine, lactate, and ammonium were detected using BioProfile200 (NOVA Biomedical) pre-calibrated with internal standards. Cells were fixed and stained with propidium-iodide (Sigma-Aldrich) for cell cycle analysis with flow cytometry (Beckman Coulter). The concentration of MAb was measured using an in-house sandwich ELISA assay.
3. Modelling 3.1. Model Structure The model was adapted from Kontoravdi et al. (2005) for cell growth/death, nutrient uptake, and major metabolism. The model was further developed to include description of cell cycle sub-populations. The cell cycle representation was based on the yeast model of Uchiyama & Shioya (1999) and the tumour cell model of Basse et al. (2003). Eq.(1)-(4) express viable cell concentration(Xv[cell L-1]) in terms of cells in G0/G1, S, and G2/M phases. As a simplification in notation, G0/G1 cells will be indicated as G1 unless otherwise stated. XG1, XS, XG2/M [cell L-1] are concentrations of viable cells in G0/G1, S, and G2/M phase, respectively, whereas Fout[L h-1] is the outlet flowrate. V[L] is the cell culture volume; b, k1, k2 [h-1] are the transition rates of cells from G1 to S, S to G2, and M to G1 respectively; and μd[h-1] is the specific death rate. (1) X v = X G1 + X S + X G 2 / M dX G1 F = 2b ⋅ X G 2 / M − k1 ⋅ X G1 − μ d ⋅ X G1 − ( out ) ⋅ X G1 dt V dX S Fout = k1 ⋅ X G1 − k 2 ⋅ X S − μ d ⋅ X S − ( )⋅ XS V dt dX G 2 / M F = k 2 ⋅ X S − b ⋅ X G 2 / M − μ d ⋅ X G 2 / M − ( out ) ⋅ X G 2 / M V dt
(2) (3) (4)
k1, k2, b can be rearranged and expressed in terms of the specific growth rate, μ [h-1]: 2 − xG1 (5) k1 = ⋅μ
xG1 1 + xG 2 / M ⋅μ k2 = xS
b=
μ
(6) (7)
xG 2 / M
where xi is fraction of cells in cell cycle phase i. xi is related to the specific growth rate (Uchiyama & Shioya, 1999; Slater et al., 1977) and are expressed as follow:
Cell Cycle Modelling for Off-line Dynamic Optimisation of Mammalian Cultures
x G1 = 1 −
(t S + t G 2 / M ) ⋅ μ − θ S − θG2 / M log 2
111
(8)
tS ⋅ μ +θS log 2
(9)
x G 2 / M = 1 − x G1 − x S
(10)
xS =
where θi represents the fraction of cells in cell cycle phase i when growth rate is zero, and tS and tG2/M [h] represent the time spent in S and G2/M phase respectively. Eq.(11)-(12) are the specific glucose uptake rate, Qglc[mmol cell-1 h-1], and the specific lactate production rate, Qlac[mmol cell-1 h-1], modified from Kontoravdi et al. (2005) based on results of the initial fed-batch culture (see Fig.2). A maintenance term for glucose uptake was removed and the glucose uptake and lactate production rates were linked to glucose concentration. In the equations below, μ[h-1] is the specific growth rate, Yx,glc[cell mmol-1] is the cell-yield from glucose, KQglc[mM] is the halfsaturation constant for glucose uptake, [GLC] is the glucose concentration [mM], Ymax -1 lac,glc[mmol mmol ] is the maximum yield of lactate from glucose, Klac,glc[mM] is the half-saturation constant for lactate production with respect to glucose concentration. [GLC ]2 μ (11) ⋅ Q = glc
2 Yx , glc K Qglc + [GLC ]2
Qlac = Ymax lac , glc ⋅
[GLC ] K lac , glc + [GLC ]
(12)
Eq.(13)-(14) take into account the production of MAb by each cell cycle phase, where v(%) is viability, QMAb,G1 , QMAb,S , QMAb,G2/M[mg cell-1 h-1] are specific MAb production rates of the corresponding cell-cycle phases, [MAb] is the concentration of monoclonal-antibody [mg L-1], KMAb[%] is an inhibition constant for MAb production with respect to cell viability. The introduction of viability in QMAb was based on the results of Glacken et al. (1988) which demonstrated that cell culture productivity was affected by low viability; these findings were also observed in our experiments that specific productivity decreased for CRL-1606 during death phase. F d [ MAb] (13) = f (v) ⋅ (Q ⋅X +Q ⋅X +Q ⋅X ) − ( out ) ⋅ [ MAb] dt
where
MAb ,G1
0 ° ° 1 f (v ) = ® ° K MAb °¯1 + v
G1
, v ≥ 80%
MAb , S
S
MAb ,G 2 / M
G2 / M
V
(14)
, v < 80%
3.2. Parameter Estimation and Dynamic Optimisation The model was implemented in gPROMS (Process Systems Enterprise Ltd.) and the parameters were estimated based on the batch and initial fed-batch data. The same set of parameters was used to generate the simulation results for the batch, fed-batch, and cell growth arrested cultures. The model consists of 13 differential equations and 32 parameters of which 7 were altered in the arrested cultures with their values programmed to switch automatically in the model when the cell cycle-arresting chemical was introduced. As a case study for product yield optimisation, the amount of feed and the cell cycle-arrest time were varied while all other cell culture conditions, e.g. feed compositions, time intervals etc., were fixed. The model-based optimisation was done using a mixed-integer dynamic optimisation algorithm (Bansal et al., 2003) with a grid of initial values for the degrees of freedom concerned. The best fed-batch strategy was selected for experimental validation with a variation in cell cycle-arrest time in two additional fed-batch cultures to test the predictability of the model.
112
C.M. Lam et al.
4. Results and Discussion 4.1. Batch Cultures The model was able to capture the reduction in growth rate and the corresponding increase in the G0/G1 phase population when cells were arrested at 44 h (Fig.1). Although the viable cell concentration of the arrested culture at late exponential phase and the final MAb concentration of the normal culture were slightly lower than predicted, it is important to note that the relative growth rates and productivity in the two cultures were in accordance with model prediction. There was a time-lag of approximately 10 h in the change in G0/G1 and S phase distribution at the beginning of the cell culture as compared with the model simulation. This might suggest the need of a lag term in the model in order to represent the delayed response of the cells.
Fig.1: Batch culture data showing (a) viable cell (Xv) and antibody (MAb) concentration; and (b) cell cycle distribution for normal(n)/arrested(ar) cultures. Simulation results are shown by lines.
Cell Cycle Modelling for Off-line Dynamic Optimisation of Mammalian Cultures
113
4.2. Fed-batch Cultures
Fig.2: Initial fed-batch culture data showing (a) viable cell(Xv) and antibody(MAb) concentration; and (b) glutamine(Gln), ammonium(Amm), glucose(Glc), and lactate(Lac) concentration. Simulation results are shown by lines.
Fig.3: Optimised fed-batch data showing (a) viable cell(Xv) concentration; and (b) antibody (MAb) concentration for cell cycle-arrest at 126h and two other cell cycle-arrest times at 78h and 96h. Simulation results are shown by lines.
The initial fed-batch culture performed revealed a rich dynamic response of the cells when glutamine was continuously added throughout the cell culture. The simulated viable cell, MAb, glutamine, and ammonium concentrations followed the experimental trends (Fig.2). However, the cells appeared to consume less glucose and, consequently, produced less lactate after about 60 h. The model over-predicted the lactate production only near the end of the culture, suggesting that certain metabolic changes had taken place which has not been fully captured by Eq.(11)-(12). The model-based dynamic optimisation results that were obtained from a fixed feed composition, same initial condition as the batch culture, and a feeding interval of 6-12 h, suggested an optimal cell cycle-arrest time at 126 h and supplementation with feed from 48 h onwards. The results of three different fed-batch cultures with identical supplementation strategies but various cell cycle-arrest times are shown in Fig.3. The viable cell concentration, Xv, was closely predicted up to about 80 h. However, after 100h, Xv decreased significantly in all three cultures. The predicted MAb concentration was in accordance with the experimental results with only a slight under-prediction around 80-100 h. Both model predictions and experimental results indicated a small difference in MAb yield when the cultures were arrested at different times. The optimised fed-batch experiments involved a total of 9 shake flask cultures so the
114
C.M. Lam et al.
deviation between the data and model predictions for Xv appeared to suggest a deficiency in the model. Overall, with the aid of model predictions, fewer experiments were needed in order to explore the possible limits of the cell culture production capacity. In the optimised fed-batch culture, the culture life-time was extended as indicated by the Xv peaking at about 100 h while the corresponding peaking time for the initial fed-batch and batch cultures were about 90 h and 65 h respectively; and the MAb yield reached ~3.5x103 mg L-1 as compared to ~2.5x103 mg L-1 in the initial fed-batch culture and ~1.3x103 mg L-1 in the batch cultures.
5. Conclusion The model was able to predict the culture dynamics for batch, fed-batch, and cell growth arrested cultures, especially up to the exponential growth phase, after which certain variable predictions deviated from the experimental results in fed-batch cultures, e.g. the viable cell concentration in the optimised fed-batch culture tended to be overestimated, and the simulated glucose uptake rate near the end of the fed-batch cultures was higher than observed. The model closely predicted the monoclonal antibody concentration in the optimised fed-batch culture despite an underestimation of the viable cell concentration. The model developed was able to direct experimental efforts to a more focused area in this case study. The monoclonal antibody yield in the optimised fed-batch culture was ~3.5x103 mg L-1 which was about 40% higher than the initial fed-batch culture. Further improvement of the model structure may be necessary to enhance its predictive capability.
References V. Bansal, V. Sakizlis, R. Ross, J.D. Perkins, E.N. Pistikopoulos, 2003. New algorithms for mixed-integer dynamic optimization. Computers and Chemical Engineering, 27, 647-668. B. Basse, B.C. Baguley, E. S. Marshall, W. R. Joseph, B. van Brunt, G. Wake, D. J. N. Wall, 2003. A mathematical model for analysis of the cell cycle in cell lines derived from human tumors. Journal of Mathematical Biology, 47, 295-312. M.K. Dyck, D. Lacroix, F. Pothier, M.-A. Sirard, 2003. Making recombinant proteins in animals - different systems, different applications. Trends in Biotechnology, 21(9), 394-399. M.W. Glacken, E. Adema, A.J. Sinskey, 1988. Mathematical descriptions of hybridoma culture kinetics: I. Initial metabolic rates. Biotechnology and Bioengineering, 32(4), 491-506. C. Kontoravdi, S.P. Asprey, E.N. Pistikopoulos, A. Mantalaris, 2005. Application of global sensitivity analysis to determine goals for design of experiments: An example study on antibody-producing cell cultures. Biotechnology Progress, 21, 1128-1135. J.K.-C. Ma, P.M.W. Drake, P. Christou, 2003. The production of recombinant pharmaceutical proteins in plants. Nature Reviews Genetics, 4, 794-805. Process Systems Enterprise Ltd. 2007. URL: www.psenterprise.com. J.M. Reichert and A.K. Pavlou, 2004. Monoclonal antibodies market. Nature Reviews Drug Discovery, 3(5), 383-384. M. L. Slater, S. O. Sharrow, J. J. Gart, 1977. Cell cycle of Saccharomyces cerevisiae in populations growing at different rates. Proceedings of the National Academy of Sciences of the United States of America, 74, 3850-3854. K. Uchiyama and S. Shioya, 1999. Modeling and optimization of α-amylase production in a recombinant yeast fed-batch culture taking account of the cell cycle population distribution. Journal of Biotechnology, 71, 133-141. X. Wang, S. He, Y. Zhang, J. Xu, Q. Feng, L. Li, L. Mi, Z. Chen, 2004. DMSO Arrested hybridoma cells for enhanced antibody production. Sheng Wu Gong Cheng Xue Bao, 20, 568571.
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
115
New Configuration For Hetero-Azeotropic Batch Distillation: I. Feasibility Studies Peter Langa , Ferenc Denesa and Xavier Jouliab a
BUTE Dept. of Building Services & Process Engineering, H-1521 Budapest, Muegyetem rkp. 3-5, bLGC-ENSIACET-INPT, 118 route de Narbonne, 31077 Toulouse, France
Abstract For heterogeneous batch distillation a new double column configuration operating in closed system is suggested. This configuration is investigated by feasibility studies based on the assumption of maximal separation and is compared with the traditional batch rectifier. The calculations are performed for a binary (n-butanol – water) and for a ternary heteroazeotropic mixture (isopropanol – water + benzene as entrainer). Keywords: heteroazeotrope, batch distillation, feasibility studies.
1. Introduction If components of a mixture form a heteroazeotrope or by the addition of an entrainer (E) a heteroazeotrope can be formed, the azeotropic composition can be crossed by decantation. In the pharmaceutical and fine chemical industries batch processes including the batch heteroazeotropic distillation (BHD) are widely applied. As far as we know the BHD was exclusively applied in the industry in batch rectifiers (equipped with a decanter) in open operation mode (with continuous top product withdrawal). The batch rectifier (BR) was investigated with variable decanter holdup by Rodriguez-Donis et al. (2002) and with continuous entrainer feeding by Modla et al. (2001, 2003) and Rodriguez-Donis et al. (2003), respectively. Recently the BHD was extensively studied for the BR and multivessel columns by Skouras et al. (2005a,b). The objectives of this paper are - to suggest a new double-column system (DCS) for the BHD, - to investigate this configuration by feasibility studies, - to compare its performance with that of the traditional BR. Calculations are performed for a binary (n-butanol – water) and for a ternary heteroazeotropic mixture (isopropanol – water + benzene).
2. The column configurations studied First the BR then the new DCS is studied by assuming maximal separation. 2.1. Batch rectifier (Fig. 1.) First the separation of the binary then that of the ternary mixture is presented. Separation of a binary mixture If the charge (feed) composition (xch,A (mole fraction of component A)) is in the Br Ar heterogeneous region ( x AZ, ) it is worth to separate it by decantation A < x ch,A < x AZ,A Ar into an A-rich ( x AZ, ) and a B-rich ( x Br ) phase before the start of the distillation. A AZ,A
One production cycle consists of two distillation steps. In the first step we select the phase to be distilled so that the overall quantity of the two products in the first cycle be
P. Lang et al.
116
Fig. 1. BR producing A from mixture A-B
Fig. 2. DCS for binary mixture
maximal. It can be derived (for pure products) that we have to distil the A-rich phase Br Ar Br first if x ch ,A > x AZ ,A /[1 − ( x AZ,A − x AZ,A )] . Step 1: Production of A: The A-rich phase ( x Ar ) of the heteroazeotrope (xAZ,A) is reAZ,A Br fluxed and the B-rich one ( x AZ, ) is withdrawn as distillate. The bottoms is product A. A
Step 2: Production of B: The B-rich phase(s) is (are) distilled. The B-rich phase of the azeotrope is refluxed and the A-rich one is withdrawn as distillate. The bottom residue is product B. The main disadvantages of the BR are that in one step only one component can be produced (in the residue) and that the recovery is limited since the other component in the distillate is saturated with this component. Separation of the ternary mixture The separation of a homoazeotropic isopropanol (A) – water (B) mixture is considered. Addition of an entrainer, in a small amount, is needed. The steps of a production cycle are: Er
Step 1: Production of A: The E-rich phase ( x TAZ ) of the ternary azeotrope ( x TAZ ) is Br
refluxed and the B-rich phase ( x TAZ ) is withdrawn as distillate, which is distilled in Step 2. The bottom residue is product A. Step 2: Removal of E: The B-rich phase of the azeotrope is refluxed and the E-rich phase is withdrawn as distillate. The bottom residue still contains some A. Step 3: Purification of B from A: A is removed (from the bottom residue of Step 2) in the form of binary A-B homoazeotrope ( x BAZ ) in the distillate and the bottom residue is product B. 2.2. The new double column system (Fig. 2.) The two column system is operated in closed mode (without continuous product withdrawal) with a single decanter. The two components are simultaneously produced as bottom residues. Separation of a binary mixture A heterogeneous charge is separated by decantation. The A-rich phase is filled in the reboiler of the column α (producing A) and a B-rich one to the other reboiler β. A homogeneous charge can be divided between the two reboilers. The top vapour of both columns is of azeotropic composition. The A-rich phase is sent to the top of column α and the B-rich one is fed to the top of column β.
New Configuration for Hetero-Azeotropic Batch Distillation: I. Feasibility Studies
117
Separation of the ternary mixture The homogeneous charge can be arbitrarily divided between the two reboilers.The entrainer, which is filled at the start only in the reboiler of column α, circulates in the system. The top vapour of the column α is ternary azeotrope and that of column β is AB binary azeotrope. The E-rich phase is sent to the top of column α and the B-rich one (containing negligible amount of E) is fed to the top of column β.
3. Feasibility method Our aim is to estimate the duration of the processes and the amount of products. A simplified model was applied based on the following assumptions: maximal separation, negligible hold-up on the trays and in the decanter, constant molar overflow, the flow rates do not vary with the time, one-phase liquid streams leave the decanter, negligible duration of pumping between the operation steps (BR), no entrainer loss (in the case of the ternary mixture). The total and component material balances for one column and the decanter are analytically solved. For the DCS we assume that both products reach the prescribed purity at the same time, that is, the duration is minimal. The process time (τ) for both configurations and for the DCS the optimal division (vα) of total vapour flow rate (V) between the two reboilers and that of the charge (Ubα/Uch) are shown. 3.1. Equations for the BR Separation of a binary mixture jr ( x irAZ,i − x AZ U ,i )( x e ,i − x b ,i ) Duration of a step: τ = ir ⋅ b jr V ( x AZ,i − x AZ,i )( x e,i − x AZ ) ,i
where i, j: components (i is produced in the given step); x b,i , x e, i : mole fraction of i in the reboiler at the beginning and end of the step; U: molar holdup in the reboiler. Distillation of the ternary mixture Step 1: We suppose that product A does not contain E (it is polluted only by B). Er Br ( x TAZ U , A − x TAZ, A )( x spec, A − x ch , A ) ⋅ ch , Duration of this step: τ(1) = Er Br ( x TAZ, A − x TAZ, A )( x spec, A − x TAZ, A ) V where x spec,A is the specified purity of product A. Step 2: The top vapour has ternary azeotropic composition. Duration of this step: Br Br x Er ,A − x TAZ ,A x TAZ,E U b τ ( 2) = TAZ ⋅ ⋅ Er Er V x TAZ ,A − x TAZ,A x TAZ,E Step 3: In this step only A and B are present, the top vapour is the homoazeotrope. There is no need for a decanter. Duration of this step: x b,A − (1 − x spec,B ) U τ (3) = ⋅ (1 + R ) ⋅ b , where R is the reflux ratio. x BAZ,A − (1 − x spec,B ) V 3.2. Equations for the double column system Separation of the binary mixture β Br For a heterogeneous charge: x αb,A = x Ar AZ,A and x b ,A = x AZ,A . For a homogeneous one:
x αb, A = x βb, A = x ch , A , the number of independent equations is less by one than in the previous case, hence one of the unknowns ( U αb , U βb , v α ) must be specified. The value of the main operational parameters:
P. Lang et al.
118
τ=
Br Ar Δ( U α x αA ) − ΔU α x AZ − x Br Δ( U α x αA ) − ΔU α x AZ, A x Ar , A x AZ, A − x AZ, A AZ, A , vα = ⋅ Ar ⋅ AZ, A α α α Ar Br Δ( U x A ) − ΔU x AZ, A x AZ, A − x Br x AZ, A − x AZ, A x AZ, A − x AZ, A AZ, A
where ΔU α = U αe − U αb , Δ( U α ⋅ x αA ) = U eα ⋅ x spec,A − U αb ⋅ x αb,A , U αb =
x ch ,A − x βb,A x αb,A − x βb,A
⋅ U ch
Separation of a ternary mixture Initially only the reboiler α contains E. We neglect the content of E of the B-rich phase. Hence there is no E in column β whose top vapour is A-B binary azeotrope. The number of unknowns is more than the number of independent equations by one. Hence one of the unknowns must be specified. The composition of the phases is a function of vα but this function can be mathematically expressed with difficulty which would make the solution of the set of equations difficult. Hence we specify vα. The values of the main parameters of the operation: U αe ⋅ ( x spec,A − x ch ,A ) x Er − x , U αb = U eα + E ErTAZ, E ⋅ v α ⋅ V ⋅ τ , τ = Er α Er xE L ⋅ ( x A − x ch ,A ) + v ⋅ V ⋅ ( x ch ,A − x TAZ,A ) U eα =
x ch ,A − (1 − x spec,B ) x spec,A − (1 − x spec,B )
⋅ U ch
4. Calculation results The total vapour flow rate of the DCS was taken equal to that of the BR ( V = 20 kmol/h ). (The heat duty is proportional to the vapour flow rate.) For the DCS we determine the optimal division of the charge between the two reboilers (and the division of the total vapour flow rates belonging to it). In all cases the amount of charge is 100 kmol and the specified purity (xspec,i) is 99.5 mol% for both products. 4.1. Separation of binary mixtures (n-butanol(A) – water(B)) The composition of the heteroazeotrope and that of the A-rich and B-rich phases, Ar
Br
respectively: x AZ = [0.2562, 0.7438] , x AZ = [0.568, 0.432] , x AZ = [0.012, 0.988] All possible cases are studied: two homogeneous charges (one rich in A and the other rich in B) and a heterogeneous one. 4.1.1. Homogeneous charge rich in A a.Batch rectifier: x ch = [0.9, 0.1] . In Step 1 A is produced (Table 1). b. Double Column System We determine τ and vα for different ratios Ubα/Uch (Figs. 3. & 4.) The best operational policy (Table 1) is when the total amount of the charge is fed into reboiler α ( U αb / U ch = 1 ).The duration of the cycle is nearly equal for the two configuBR Step 1 Step 2 Ubα,β/Uch Div. of vap. fl.rate Duration [h] 0.862 0.014 Prod. A [kmol] 90.336 0.000 Prod. B [kmol] 0.000 9.544 Byprods. [kmol] 0.120 Byps. comp. [mol%] 56.80
DCS Col. α Col. β 1.00 0.00 0.9844 0.0156 0.880 90.404 0.000 0.000 9.596 0.000 -
BR Step 1 Step 2 Ubα,β/Uch Div. of vap. fl.rate Duration [h] 0.101 0.034 Prod. A [kmol] 0.502 0.000 Prod. B [kmol] 0.000 99.112 Byprods. [kmol] 0.386 Byps. comp. [mol%] 1.12
DCS Col. α Col. β 0.00 1.00 0.2538 0.7462 0.136 0.505 0.000 0.000 99.495 0.000 -
Table 1. Results (binary mixture rich in A) Table 2. Results (binary mixture rich in B)
119
New Configuration for Hetero-Azeotropic Batch Distillation: I. Feasibility Studies
BR Step 1 Step 2 α,β Ub /Uch Div. of vap. fl.rate Duration [h] 2.006 0.100 Prod. A [kmol] 29.298 0.000 Prod. B [kmol] 0.000 69.823 Byprods. [kmol] 0.879 Byps. comp. [mol%] 56.80
DCS Col. α Col. β 0.5180 0.4820 0.9530 0.0470 2.141 29.798 0.000 0.000 70.202 0.000 -
Step 3 0.261 0.000 30.723 5.224 BAZ
DCS Col. α Col. β 0.9981 0.0019 0.9650 0.0350 8.494 67.576 0.000 0.000 32.424 0.000 -
Table 4. Results (ternary mixture)
25
1.0
20
0.8
15
0.6
10
0.4
5
0.2 0.0
0 0.0
0.2
0.4
0.6
U bα /U ch
0.8
0.0
1.0
0.2
0.4
0.6
U bα /U ch
0.8
1.0
Fig. 4. Rel. vap. flow rate of column α (binary mixture rich in A)
Fig. 3. Duration of the process (binary mixture rich in A)
1.0
16
0.8
U bα /U ch
12
τ [h]
BR Step 2 0.010 0.000 0.000 0.160 TAZ
vα
τ [h]
Table 3. Results (bin. heterogeneous mix.)
Step 1 Ubα,β/Uch Div. of vap. fl.rate Duration [h] 8.055 Prod. A [kmol] 64.001 Prod. B [kmol] 0.000 Byprods. [kmol] Byprods. compn. -
8 4
0.6 0.4 0.2 0.0
0 0.5
0.6
0.7
v
α
0.8
0.9
Fig. 5. Duration of the process (ternary mixture)
1.0
0.5
0.6
0.7
vα
0.8
0.9
1.0
Fig. 6. Division of the charge (ternary mixture)
rations. In the case of DCS by the best policy the whole amount of A is already in the reboiler α at the start and only B must be eliminated from it. The reason of the small value of vβ is that the B-rich phase flowing from the decanter into column β has very high B-content ( x Br AZ,B = 0.988 ). Hence only a small amount of A must be removed in the form of azeotrope for the purification of B. The main advantage of the DCS is that there is no residue at all. 4.1.2. Homogeneous charge rich in B a. Batch rectifier: x ch = [0.01, 0.99] . In Step 1 B is produced (Table 2). b. DCS: We determined τ and vα for different divisions of the charge. The best operational policy (Table 2) is when the total amount of the charge is fed into reboiler β. The duration of the cycle is nearly equal in the two cases. The ratio of the duration of the two steps for the BR: τ (1) / τ ( 2) = 2.971 The ratio of vapour flow rates of the two columns for the DCS: v β / v α = 2.940
P. Lang et al.
120
The values of these two ratios show that energy demand of the production of each component is nearly the same for the two configurations. The division of the charge can be explained similarly as in the case of the previous charge composition. 4.1.3. Heterogeneous charge Before the distillation the charge of composition x ch = [0.3, 0.7] is separated by decantation into an A-rich ( U Ar = 51.8 kmol ) and a B-rich ( U Br = 48.2 kmol ) phases. a. Batch rectifier: In Step 1 the A-rich phase is distilled and A is produced (Table 3). b. DCS: The preliminary decantation provides the division of the charge which determines the value of vA. Hence only one solution exists (Table 3). The duration of the cycle is nearly equal in the two cases. 4.2. Separation of the ternary mixture (isopropanol (A) – water (B) + benzene (E))
Binary azeotropic charge ( x BAZ = [0.674, 0.326,0] ) is separated by the application of an entrainer (E). The composition of the ternary IPA – water – benzene heteroazeotrope and those of its E-rich and B-rich phases: Er
Br
x TAZ = [0.238, 0.239, 0.523] , x TAZ = [0.277, 0.048, 0.675] , x TAZ = [0.103, 0.894, 0.003] a.Batch rectifier. Calculation results are shown in Table 4. b.DCS: We determine τ and U αb / U ch for different rel. vapour flow rates of column α (Figs. 5-6). Calculation results for the best operational policy are shown in Table 4. The duration of cycle is nearly equal in the two cases. The amount of the final residue is more than 5 % of the charge for the BR, whilst there is no residue at all by the DCR.
5. Conclusion We suggest using a new double column system (DCS) for heterogeneous batch distillation. It is operated in closed mode without continuous product withdrawal. This configuration was investigated by feasibility studies based on a simplified model (maximal separation, negligible holdup) and was compared with the traditional batch rectifier (BR). The calculations were performed for the mixtures n-butanol – water and isopropanol – water + benzene (entrainer). The performance of the DCS was compared with that of the BR. The main benefit of the DCS is that it produces no residue to be separated later. The DCS proved to be feasible and in the cases studied competitive with the BR. In comparison with the BR it gave for the ternary mixture better and for the binary one similar results, respectively. Feasibility studies were completed by rigorous simulations. The results of these calculations based on much less simplifying assumptions are published in a separate paper.
References Modla G., P. Lang and K. Molnar, (2001). Batch Heteroazeotropic Rectification … 6th WCCE, Melbourne, Australia, (10 pages on CD),. Modla G., P. Lang , B. Kotai and K. Molnar, (2003). AIChE J, 49 (10), 2533. Rodriguez-Donis I, V. Gerbaud, X. Joulia, (2002). AIChE J, 48 (6), 1168. Rodriguez-Donis Y., J. Equijarosa, V. Gerbaud, X. Joulia, (2003). AIChE J, 49, 3074. Skouras S., V. Kiva , S. Skogestad, (2005a). Chem. Eng. Sci., 60, 2895. Skouras S., S. Skogestad, V. Kiva, (2005b). AIChE Journal, 51 (4), 1144-1157.
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
121
Integrated Design Of Solvent-Based Extractive Separation Processes P. Lek-utaiwana,b, B. Suphanita, N. Mongkolsirib, R. Ganic a
ChEPS, Dept of Chem Eng, King Mongkut’s Univ of Technical Thonburi, Bangkok , 10150, Thailand b SCG Chemicals, Rayong,21150, Thailand c CAPEC, Dept of Chem Eng, Technical Univ of Denmark, DK-2800 Lyngby, Denmark
Abstract The objective of this paper is to present a systematic methodology for integrated design of solvent-based extraction processes for recovery of desired chemicals and to highlight the application of this methodology through the solution of an industrial case study involving the recovery of two highly valued with high demand chemicals, ethylbenzene (EB) and mixed-xylenes, from a C8-aromatics mixture. The computer aided molecular design (CAMD) technique integrated with process design has been used to design the solvent-based extractive separation process. The details of the systematic methodology are presented and highlighted through the results from the industrial case study. A sensitivity analysis of the design to uncertainties in thermodynamic properties has been performed to evaluate their effect on process economy and environmental impact. The sensitivity analysis also provided input to design of experiments for measurements of important uncertain properties. Keywords: solvent-based separation, solvent selection, extractive distillation, CAMD
1. Introduction Increasing the value of a product is an important issue in almost all chemical processes. This is particularly true in naphtha cracking processes where there are opportunities for improvements of a large range of chemical products, which are usually intermediates for a wide range of chemicals-based consumer products. In this way, they enhance the value of the naphtha cracking unit product. Among many options, two commonly employed alternatives to upgrade byproducts is to separate and purify them to high-value (pure) chemicals or to convert them to another higher value chemical through reaction pathway. In this work, the first option of purifying the chemical product is investigated. The design objective for the solvent-based purification process is to not only satisfy the process-product specifications, but also to have a good economic return and reliability of performance. The key to success in this case is not only the process design, but also the effect of solvent selection on the process economy, process operability and the environmental impact. In this work, a systematic methodology integrating the solvent (design) selection issues with the extractive separations issues, the process economy and industrial operational as well as environmental constraints. Various design approaches have been proposed for separation process design and optimization, such as heuristic, insights based approach, graphical or geometric approach and numerical. In this work, the driving force based design, proposed by Gani & Bek-Pedersen [2] for synthesis, design and operation of the separation processes, especially for distillation based separation system is applied. Successful solvent-based
122
P. Lek-utaiwan et al.
extraction system design also requires the use of a good (environmentally acceptable) solvent that can increase driving force of interesting key components.
2. Methodology for design of solvent-based extraction processes The systematic methodology integrates the solvent design (selection) issues with the extractive separation issues, the process economy and industrial operational as well as environmental constraints. The CAMD technique [1] is combined with analysis of residue curve maps and separation driving forces to generate feasible solvent-based extractive separation process flow-diagrams. The best process is identified as the one that satisfies all the product-process constraints as well as being economic and environmentally acceptable. Figure 1 shows the main steps of the systematic methodology.
Figure 1: Block diagram of the integrated design of solvent-based separation process sequencing algorithm
The methodology highlighted in Fig 1 employs a number of computer aided methods & tools. For solvent selection, it employs the ProCAMD software [4] that designs/selects solvents for specified solvent target properties. The solvent (entrainer) plus the binary mixtures to be separated forms ternary systems whose distillation boundaries and residue curve maps are analyzed to identify the suitable solvent. ICASPDS is used for this purpose. As the solvent-based ternary systems are non-ideal mixtures, the accuracy of the predicted vapor-liquid phase equilibria are verified, where possible, with available experimental data and compared with more than one property model. In this case, the following software, ICAS®, Aspen Plus®, Aspen Distill®, or DistillDesigner® have been used. For solvent recovery column design, the driving force
Integrated Design of Solvent-Based Extractive Separation Processes
123
approach of Gani and Bek-Pedersen [2] has been used while for the two-feed extractive distillation column, the method proposed by Petlyuk [3] has been used. For a feasible process configuration, the operational costs as well as the equipment costs are calculated to obtain the final economic analysis. The type of solvent used and its loss with the products provides an account of the environmental impact. In a business (industrial) world, the most important issue is not just operational feasibility but also economic feasibility. Therefore, an economic evaluation is needed before any new process investment can be made. However, before any such investments, any uncertainties in the design need to be quantified. Therefore, a sensitivity analysis of the uncertain parameters to investigate the effects on process economy is performed as the last task of the systematic design methodology. The conclusions of the sensitivity analysis helps the engineers to decide if further experimental work is necessary.
3. Industrial case study This case study involves the recovery of highly valued and high demand ethylbenzene (EB) and mixed-xylenes (comprising of p-xylene (PX), m-xylene (MX) and o-xylene (OX)) from a C8-aromatics mixture (C8A). As point out above, C8A is isomers mixture, so their separation (recovery) is not simple, that why there is only one commercial process of liquid-phase adsorptive separation available for EB recovery from C8A. [8] However, this process requires high investment cost and generates huge volume of waste adsorbent that may become an environmental problem. Therefore, another green process should be considered for the EB purification. The ratio of various properties of the key components (EB and PX) were tested to examine the possibly alternatives. The result showed, by vapor pressure ratio, the solvent-based extractive distillation can be employed for their purification. [7] 3.1. Solvent selection The problem of identifying solvents for the separation of EB from PX by extractive distillation is considered first. The target solvent properties are solubility parameter, the normal boiling point, the normal melting point and selectivity (Sij = γi∞/γj∞). Specifying the above constraints to ProCAMD, a list of feasible solvents were obtained, from which, a selection is listed in Table 1. Table 1 Selected solvent by ProCAMD Result no
1 2 3 4 5 6 7 8 9
Solvent Name
Solubility parameter at 298 K (MPa1/2)
Normal Melting point (K)
Normal Boiling point (K)
Selectivity
Aromatic-Aldehyde-1 (AAD1) Acyclic-Ester-1 (AE1) Cyclic-Ketone-1 (CK1) Acyclic-Ester-2 (AE2) Acyclic-Ketone-1 (AK1) Cyclic-Ketone-2 (CK2) Acyclic-Ketone-2 (AK2) Aromatic-Alcohol-1 (AAL1) Cyclic-Amide-1 (CAD1)
21.44 21.42 17.86 19.84 17.69 19.88 17.88 24.09 23.16
247.15 254.15 265.05 234.15 209.23 244.91 232.4 248.81 249.15
453.51 475.15 488.35 453.95 422.02 419.32 451.08 466.67 475.15
1.23 1.22 1.22 1.20 1.19 1.19 1.18 1.13 1.13
124
P. Lek-utaiwan et al.
As result in table 1, the solvent that claimed by Berg’s patent [7] was also presented in the list at the fifth rank. This means successful in solvent selection could be achieved because the better solvents in term of both selectivity and solvent recovery can be acquired. (Berg’s solvent has closed boiling point to OX, so this becomes solvent recovery problem.) Due to its concentration-independent, the selectivity is the primary criterion chosen to be considered for selecting the suitable solvent in stead of the driving force. However, the selection of the best solvent based on only Sij is inadequate because it does not directly relate to the distillation design. The suitable criterion should return to how significant the solvent could alter the driving force between the key components. 3.2. Analysis of the solvents in terms of driving force diagrams The performance of the solvents were checked through solvent-free driving force diagrams for different choices of the property models. Figure 2 shows the solventfree driving forces obtained for the same systems with the original UNIFAC-VLE model and the UNIFAC-Do model [5]. As solvent AE1 (acyclic-ester-1) appears to have desired predicted behavior with both models, it is selected for further studies. One important point of difference is the predicted values of Dy (see Figures 2a-2b). With the UNIFAC-VLE model, it is 0.045 while with UNIFAC-Do, it is 0.145. Therefore, experimental verification is necessary to establish the true value and a sensitivity analysis to determine the solvent property effects on process economy needs to be checked before a decision for pilot plant studies can be made. Diving force curve-UNIFAC-DMD Diving force curve-UNIFAC
0.16
0.06 No-Solvent AAD1 AE1 CK1 AE2 AK2 CAD1 AK1 CK2 AAL1
0.05
0.04
No-Solvent AAD1 AE1 CK1 AE2 AK2 CAD1 AK1 CK2 AAL1
0.14
0.12
0.1
DF
DF
0.08 0.03
0.06 0.02
0.04
0.02
0.01
0 0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
0 0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
-0.02
xEB
(a) by UNIFAC
xEB
(b) by UNIFAC-Do
Figure 2: Solvent-free driving force curves plots for selected solvents
Assuming that one of the models is correct, the design calculations can be continued to obtain the process economic analysis. At the same time, the environmental impact can also be investigated. As our selected solvent is an ester, it’s MSDS shows low human effect, which may only act as an irritant to skin, eye and respiratory, and do not have any other environmental effect. So, it can be concluded that solvent is suitable for separation of EB from PX by extractive distillation. 3.3. Process design Solvent-based separation through extractive distillation consists of two distillations. The first is an extraction column with two feed (Aspen Distill® was used designing this column), while the second is a simple distillation column (the driving force concept was used for designing this column). The design was then verified by rigorous simulation using Aspen Plus®. The residue curve map (see Fig. 3) was used
125
Integrated Design of Solvent-Based Extractive Separation Processes
for the design of the first column to have consistent bottom and top products. The design details for this column for both models are given in Table 2. For the solvent recovery column, fifty theoretical stages were required for total recovery the solvent with degree of purity to level of 99.99%mol. Key components for this column were AE1 and OX. By driving force concept, at Dx = 0.4, the feed location was at 30th stage. The conventional distillation for separating EB to the required purity was also designed to compare with the extractive distillation approach. Since C8 aromatics mixture is an ideal mixture, so the same results were obtained from both property packages [6], which total number of stage was 298 stages, feed location was at 179th stage (Dx = 0.4, Dy = 0.0145), reflux ratio was 20, reboil ratio was 23.3. Separation of EB by a single conventional distillation column is obviously not feasible. However, the data can be used to compare with extractive distillation system in terms of investment cost and operating cost.
AE1
AE1
(a) Feed and products specifications
(b) Complete design
Figure 3 Residue curve maps of EB-PX-AE1 system Table 2 Input data and results from Aspen Distill® for extraction column design
Input Parameter
Value
EB/PX mix. rate EB/PX mix. composition AE1 rate
1.0
AE1 composition Distillate composition
AE1 = 1.0
Bottom product compositon Reflux ratio Operating pressure
EB = 0.6 PX = 0.4 2.5
EB = 0.995 PX = 0.005 AE1 = 1e-6 EB = 0.031 PX = 0.121 AE1 = 0.848 20 1 atm
UNIFAC Output Parameters Number of theoretical stages Feed location
UNIFAC-Do Value 78
Output Parameters Number of theoretical stages Feed location
Value 44
EB/PX mix. stream AE1 stream
33th
0.53
Distillate product rate
0.53
Bottom product rate
0.47
Bottom product rate
0.47
Reboil ratio
2.20
Reboil ratio
2.52
EB/PX mix. Stream AE1 stream
58th
Distillate product rate
7th
(Note: Dy = 0.045)
(Note: Dy = 0.145)
8th
126
P. Lek-utaiwan et al.
3.4. Sensitivity analysis A sensitivity analysis was performed to identify the effect of the driving force on the utility cost and the equipment cost. The results are shown in Fig. 4 and they confirm that the driving force is inversely proportional to the ease of separation and therefore the cost. This means that over-prediction of the driving force may lead to infeasible separation while under-prediction of the driving force may lead to waste of resources. The equipment costs were estimated by Aspen ICARUS® and utility pricings were based on general pricings in Thailand. Equipm ent cost sensitivity analysis
Utility cost sensitivity analysis 3,800
10.00
3,600
9.50 9.00
3,400
8.50 8.00
3,200 3,000
7.50 7.00
2,800
6.50 6.00
2,600 2,400
5.50
2,200
5.00
2,000
4.50 4.00
1,800
3.50 3.00
1,600 1,400
2.50 2.00
1,200 0
0.02
0.04
0.06
0.08
D r i v i ng f or c e ( Dy )
(a) Utility cost
0.1
0.12
0.14
0
0.02
0.04
0.06
0.08
0.1
0.12
0.14
Dr i v i ng f or c e ( D y )
(b) Equipment cost
Figure 4 Sensitivity analysis on uncertainty effect of thermodynamic property prediction
4. Conclusions A systematic methodology where solvent selection and process design have been integrated, has been developed and tested through the solution of an industrial case study involving a difficult separation problem. While the methodology and the corresponding tools were found to be applicable for industrial problems, uncertainties in property model predictions were noted. This pointed out that experimental verification of the model-based results is necessary and the sensitivity analysis provided enough information to plan the experimental effort, as future work for this project. Finally, it can be concluded that the available computer aided methods and tools can significantly reduce the time and effort to solve the class of problems highlighted in this work.
References [1] AT Karunanithi, LEK Achenie, R Gani, 2006, Chemical Engineering Science 61, 1247-1260. [2] R Gani and Bek-Pedersen, 2000, AIChE Journal, 46, 1271-1274 [3] F.B. Petlyuk, 2004, Distillation Theory and Its Application of Optimal Design of Separation units, Cambridge series in chemical engineering [4] R. Gani, 2006, ICAS-Program Package, CAPEC Report, DTU, Lyngby, Denmark (www.capec.kt.dtu.dk) [5] U. Domanska et. al., 2005, Fluid Phase Equilibria 235, 182-190. [6] W.L. Rodrigues, S. Mattedi, J.C.N. Abreu, 2005, Brazilian Journal of Chemical Engineering [7] L. Berg, Sep. of EB form PX by Ex. Dist, US Patent No. 5 425 855 (1995). [8] UOP LLC, 2004, Process Technology and Equipment
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
127
Development of a novel Petri net tool for process design selection based on inherent safety assessment method Fakhteh Moradi, Parisa A. Bahri * School o, Electrical, Energy and Process Engineering, Murdoch University, Murdoch, WA 6150, Australia
Abstract Safety assessment can be implemented using different tools during process design stage. As part of this assessment, the implementation ability and the flexibility of the tools are of great concern. In this paper, a new user-friendly approach using Petri nets as modelling and implementation tool has been presented. Inherent safety methodology is used to assess the safety level of different process options and I2SI indexing system is employed to quantify safety factors. The applicability of this tool is demonstrated through revisiting an aclyric acid production case study taken from literature. Keywords: Petri net, inherent safety, process design.
1. Introduction Due to the importance of safety in process industries various safety and risk assessment methods have been developed to provide the opportunity of considering safety issues in early design stages. Meanwhile several studies have been undertaken to create appropriate implementation tools for developed assessment methodologies (Palaniappan et al., 2002a, Khan and Amyotte, 2004 and 2005). In this paper, inherent safety method and Petri nets modelling have been selected as the safety assessment and implementation tool, respectively. Section 2 briefly describes inherent safety methodology and adapted indexing tool and proposed modifications. Section 3 gives some information about Pteri nets and the related modelling approach undertaken in this research. In section 4 the proposed method is illustrated using a case study. Some discussions are given in section 5 and finally the paper concludes with reviewing the advantages of the proposed method.
2. Inherent safety method Inherently safer design, as one of the assessment techniques used in early design stage, aims at making processes inherently safer by using key principles such as elimination, minimization, substitution, moderation, and simplification (Kletz, 1985, Hendershot and Berger, 2006). Inherent safety methodology applies these principles to a basic process in order to eliminate or reduce the hazards. Using less hazardous materials, minimizing the inventory of hazardous material and changing the form and/or condition of using hazardous materials are some examples of application of these guidewords (Hendershot, 1997, Khan and Amyotte, 2005).
*
Author to whom correspondence should be addressed:
[email protected]
128
F. Moradi and P.A. Bahri
From the financial point of view, considering inherently safer options in process deign will reduce the process lifetime costs. Although conventional systems may have less fixed and operational costs, inherently safer options turn to be the cost-optimal ones given their lower maintenance and safety measure costs. In application of inherent safety concepts, I2SI indexing system is used for quantification of process units and equipment response.
2.1. Indexing system The I2SI indexing system for inherent safety evaluation as developed by Khan and Amyotte (2005) has been adapted in this study. Their final inherent safety index (I2SI) shows the potential applicability of the inherent safety keywords to the process. The index value greater than unity means positive response to inherent safety principles. The larger index indicates better response. A less than unity I2SI indicates that the equipment does not respond to inherent safety guidelines which is a weakness of the process route containing that equipment. In financial analysis two final indices are available: Conventional Safety Cost Index (CSCI) which is the ratio of conventional safety measures of the system over the probable loss cost, and Inherent Safety Cost Index (ISCI) which is the relative amount of the cost of inherent safety measures added to the system to the loss cost (Khan and Amyotte, 2004). Smaller ISCI in comparison to CSCI shows enviable impact of safety features on safety costs. In other words the smaller the ISCI/CSCI fraction the better the response. In this study the total number of non-responding equipment in each route is considered as the first comparison factor named Penalty. It is also proposed that I2SI to be divided by ISCI/CSCI ratio to obtain a unique index called Safety-Cost Ratio which represents a combination of safety and cost factors for each piece of equipment (Equation 1). Since a large I2SI and a small ISCI/CSCI ratio is always desirable, larger values of SafetyCost Ratio will indicate better response to inherent safety principles. In addition the Total Safety-Cost Ratio of each route is calculated as the sum of the individual SafetyCost Ratios of all the equipment existing in that route (Equation 2). These calculations provide decision-makers with a unique index for each route as a judgment base instead of simple assessment of different factors of different equipment in Khan and Amyotte (2005). These modifications will dramatically reduce human intervention into decisionmaking process. Safety-Cost Ratio = I2SI / ( ISCI / CSCI ) Total Safety-Cost Ratio =
¦
n
(1)
(Safety- Cost Ratio)
i 1
i
(2)
n is the total number of equipment Finally, to make decision about the best route, the Penalty factor would be considered in the first step. The route with the smallest Penalty factor is considered as the safest route. At the second level, among the routes with the same and smallest Penalty factors, the best one is the route with the largest Safety-Cost Ratio.
Development of a Novel Petri Net Tool for Process Design Selection Based on Inherent Safety Assessment Method
129
3. Petri net model The implementation tool has to offer a comparative base to evaluate different process routes and to choose the best possible option. Different factors will come into account to define the efficiency of the tools. Flexibility, complexity and the number of routes that can be evaluated at certain time can be noted as some of these factors. Petri net modelling tool can be considered as a suitable implementation tool for risk assessment due to its flexibility and process simulation ability (Vernez et al., 2004). In addition, different feasible process options can be modelled in a Petri net as a super model, and assessed from safety point of view. A Petri net is a directed bipartite graph including places (drawn as circles) and transitions (drawn as bars). Places contain tokens which are shown as dots. The set of arcs are divided into input and output arcs with an arrowhead on their destinations. A transition is called enabled if all input places have at least the same number of tokens as all its output places. An enabled transition fires by removing tokens from input places to output places. Places, transitions and arcs all can be weighted. Weight is an additional feature that can carry critical attribute of related node through the nets (Gu and Bahri, 2002) In this paper, the first step has been to adapt a type of Petri net to model the process route(s). Initially, the basic route of producing a desired product is chosen. All possible combinations of process units to optimize the production yield and operating conditions of the basic route are considered as new routes. All the possible routes are then put together to create the supernet model of the system. This supernet is divided into various subnets based on the similarities and differences between production alternatives. Similar processing units of different routes build up subnets which are shared between some routes while unlike processing parts may create subnets which are used in one route only. Petri net model is able to automatically create different combinations of these subnets to define all possible process routes. The type of Petri net model used in this research is Place Weighted Petri net. Places represent equipment, transitions show starting and finishing of operations and tokens are raw material, semi-finished and finished products. The weights on places indicate Safety-Cost Ratios for equipment.
4. Case study The selected acrylic acid production process involves catalytic oxidation of propylene in the vapour phase at 190°C and 3 atm pressure. Two side reactions of this one-step process result in production of carbon dioxide and acetic acid with water (Khan and Amyotte, 2005). Three main options from different possible combinations of process units have been previously studied (Khan and Amyotte, 2005, Palaniappan et al., 2002b). The first option is the base case with no additional inherent safety features. The second and third options are revised versions of the first one. Modifications can include some or all of the following: a quench tower to reduce the temperature, change of solvent to lower the severity of the operating conditions, an extraction column, a solvent mixer to optimize the use of solvent and efficiency of acid extraction and the use of solvent recycle. Option 3 (Figure 1) which contains all basic and additional processing units can be described as follows. Acrylic acid is produced by partial oxidation of propylene in a fluidized-bed catalytic reactor. To prevent any side reaction, a cold recycle quench is used immediately after reactor. Deionized water in the off-gas absorber absorbs off-gas from the quench tower, containing acetic acid, acrylic acid, unreacted propylene, and byproducts. In the next step, an acid extractor is used for liquid-liquid extraction to
130
F. Moradi and P.A. Bahri
separate the acid from water using diisopropyl ether as the solvent. After that diisopropyl ether is recovered and recycled in the solvent tower from the organic phase of extractor products. The bottom stream from this solvent tower is sent to the acid tower to separate and cool the acetic acid and acrylic acid and send them to storage. A waste tower is used to recover and recycle the solvent from acid extractor’s aqueous phase product. The bottom wastewater stream, containing acetic acid and small amount of solvent, is sent to wastewater treatment (Palaniappan et al., 2002b). In order to create the supernet of this process involving all processing units of the three mentioned options, the basic parts of routes are included in the main structure of the supernet. Moreover some groups of one or more units have been created and modelled as subnets. As a result, the following unit groupings/subnets have been considered: x Subnet A: including air compressor (Figure 2a). x Subnet B: including distillation column I, distillation column II, and distillation column III (Figure 2b). x Subnet C: including solvent splitter (Figure 2c). x Subnet D: including acid extraction tower, distillation column I, distillation column II, distillation column III, and solvent mixer (Figure 2d). The Petri net model of the supernet (Figure 2e) is implemented in Visual C++ and the total number of routes generated by Petri net is found to be 8. The results of Total Safety-Cost Ratio and Penalty factor estimations for these routes are presented in Table 1.
5. Discussion The results in Table 1 illustrate that the 8 generated routes have Penalty factors between 2 and 6 and Total Safety-Cost Ratios between 32.25 and 3.6 depending on their added inherent safety feature(s). Routes 3 and 4 with Penalty factor of 2 have the lowest, specifying them as safer options which are the same as options 2 and 3 respectively in Khan and Amyotte (2005). Between these two routes, route 4 has Total Safety-Cost Ratio of 32.25 which is higher than 29.98 for option 3 and the highest among all routes resulting in route 4 to be the best option. Route 5 which is the base case with no added inherent safety feature shows the highest Penalty factor of 6 and the smallest Total Safety-Cost Ratio of 3.6. In comparison with previous methods, the proposed method has significantly reduced human intervention in decision-making process. Route selection can be based on Total Safety-Cost Ratio which is a combination of safety and cost indices of all equipment in each route instead of assessing different factors separately. Moreover this approach has the capability to automatically generate possible process options and carryout safety calculations simultaneously. The automation of route generation which means creating all possible combinations of subnets and the base case is one of the most important advantages of using Petri net model. This minimizes the likelihood of missing any possible combination.
6. Conclusion This paper proposed place weighted Petri nets as a novel tool for selection of process design based on inherent safety technique. Inherent safer design is a methodology to achieve fundamentally safer plants. The impacts of applying inherent safety principals in process design can be quantified using I2SI indexing system.
Development of a Novel Petri Net Tool for Process Design Selection Based on Inherent Safety Assessment Method
131
The proposed approach provides designer with the opportunity of considering more feasible routes faster through its automatic route generation ability and easier evaluation and comparison of their safety and costs through simultaneous calculation of Total Safety-Cost Ratios. Table 1. Total Safety-Cost Ratio of each route
Penalty factor Total SafetyCost Ratio
Route1
Route2
Route3
Route4
Route5
Route6
Route7
Route8
5
5
2
2
6
6
3
3
8.65
9.57
29.98
32.25
3.6
4.52
24.93
27.20
Figure 1. Aclyric acid production route including all inherent safety features.
132
F. Moradi and P.A. Bahri
Figure 2. Petri net model of aclyric acid production routes, a: subnet A, b: subnet B, c: subnet C, d: subnet D, e: supernet.
References Gu, T. & A. Bahri, P., 2002, A survey of Petri net applications in batch processes, Computers in Industry, 47, 99-111. Hendershot, D., 1997, Inherently safer chemical process design, Journal on Loss Prevention in the Process Industries, 10, 3, 151-157. Hendershot, D. & Berger, S., 2006, Inherently safer design and chemical plant security and safety, American Institute of Chemical Engineering, Khan, F. & Amyotte, P., 2004, Integrated inherent safety index (I2SI): A tool for inherent safety evaluation, Process Safety Progress, 23, 2, 136-148. Khan, F. & Amyotte, P., 2005, I2SI: A comprehensive quantitative tool for inherently safety and cost evaluation. Loss Prevention, 18, 310-326. Kletz, T. A., 1985, Inherently safer plants, Plant/Operation Progress,4, 3, 164-167. Palaniappan, C., Srinivasan, R. & Tan, R., 2002a, Expert system for the design of inherently safer processes. 1. Route selection stage, Ind. Eng. Chem, 41, 26, 6698-6710. Palaniappan, C., Srinivasan, R. & Tan, R., 2002b, Expert system for the design of inherently safer processes. 2. Flowshhet development stage, Ind. Eng. Chem, 41, 26, 6711-6722. Vernes, D., Buchs, D. R., Pierrehumbert, G. E. & Bersour, A., 2004, MORM-A Petri net based model for assessing Oh&S risks in industrial processes: Modeling qualitative aspects. Risk Analysis, 24, 6, 1719-1735.
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
133
Population balance modeling of influenza virus replication in MDCK cells during vaccine production Thomas Müllera, Josef Schulze-Horselb, Yury Sidorenkob, Udo Reichla,b, Achim Kienlea,b a
Otto von Guericke Universität Magdeburg, Universitätsplatz 2, D-39106 Magdeburg, Germany b Max Planck Institut für Dynamik komplexer technischer Systeme, Sandtorstraße 1, D39106 Magdeburg, Germany
Abstract In this contribution a population balance model of influenza A virus replication during vaccine production in Madin-Darby canine kidney (MDCK) cell cultures is developed. Differentiation on the population level is described by a degree of infection, which is proportional to the amount of intracellular viral proteins. This can be measured directly using flow cytometry. It is shown that the model shows reasonable agreement with experimental data, although not all details of the inner dynamics can be fully reproduced. Keywords: population balance modeling, distributed populations, virus replication, vaccine production, microcarrier cell culture.
1. Introduction In influenza vaccine production the use of permanent mammalian cell lines becomes more and more important. Besides sophisticated cell culture technologies and downstream processing methods, mathematical modeling plays a crucial role in improving production efficiency. Most notably for analysis and optimization of the process, the benefit of combining extensive experiments with mathematical modeling approaches is obvious. Thus, this strategy will contribute to the investigation of dynamic and kinetic phenomena and their link to the measured data. One can distinguish between structured and unstructured models, the latter neglecting intracellular phenomena. On the contrary, structured models account for intracellular processes and states in different compartments of the cell or include explicit kinetics for various intracellular steps of virus replication. Despite the high social relevance of infectious diseases and widespread use of animal cell lines in vaccine production, the application of even unstructured models for quantitative analysis and parameter estimation has not been common practice in bioprocess optimization. So far, research concerning influenza vaccine production in MDCK cell cultures has focused on the characterization of metabolism, growth of different cell lines and virus yields in various production systems [1,2].
134
T. Müller et al.
Based on the experimental investigation of the infection status of cells by measuring immunofluorescence of intracellular viral proteins with flow cytometry [3] mathematical models are required, which are able to describe distributed populations of cells with different degrees of infection. For this purpose, in the present paper an internal coordinate is introduced to quantify the degree of infection and the previous approach by Möhler et al. [4] is extended accordingly.
2. Model formulation The population balance model of Möhler et al. [4], which forms the basis for the presented approach, describes the replication of influenza A viruses in MDCK cells growing on microcarriers. It is unstructured and includes three concentrated state variables, which are the number concentrations of uninfected cells Uc, infected cells Ic and free virus particles V. It is assumed that at the time of infection (t0) all microcarriers are completely covered with cells, which corresponds to the maximum cell concentration ( U c , 0 = C max = 1.2 ⋅10 6 ml −1 [4]). Virus seed is added to the microcarrier cell culture and infection takes place. The amount of infectious virus particles added is described via MOI (multiplicity of infection, number of infectious virions per cell at t0 [5]). Virus particles instantly attach to uninfected cells. Consequently, the latter become infected with the infection rate kvi. After a certain time delay (τ = 4.5 h) due to intracellular processes, infected cells start releasing virus particles with the release rate krel and carry on until they die (kcd). Free virions can either attach to still available uninfected cells (kva) or simply degrade (kvd). Attachment to infected cells is neglected. In Möhler et al. [4] it is shown that the simple unstructured model is able to show good agreement between simulated outer dynamics and hemagglutination (HA) assays, which allow to estimate the total number of virus particles in the supernatant. However, the intracellular progress of infection is not considered, and therefore a comparison with flow cytometric fluorescence data characterizing the cell’s status during infection is impossible. To change this situation and to allow differentiation between cells the degree of infection δ is introduced as an infected cell’s property:
I c (t , δ ) = I c ,δ (t ) with δ ∈ N, [1, ∞] The degree of infection specifies the intracellular amount of viral protein and corresponds to the equivalent number of virus particles inside the cell assuming that a complete virus particle comprises 4000 viral proteins M1 and NP (3000 M1/virion +1000 NP/virion [6]). Schulze-Horsel et al. [3] show that the intracellular amount of viral M1 and NP proteins is coupled linearly with the cell's fluorescence caused by immunostaining against influenza A virus M1 and NP. The uptake or production of 4000 viral M1 and NP proteins or 1 virus particle respectively will lead to an increase of δ by 1; the cell’s fluorescence will increase by 2.66 FU/virion (fluorescence units, data not shown). Because not only infected cells but also uninfected cells with no intracellular viral protein show unspecific fluorescence intensity due to unspecific antibody binding, it seems suitable to change the internal coordinate from the degree of infection δ to a more
Population Balance Modeling of Influenza Virus Replication
135
general degree of fluorescence ϕ, where every step from one degree to another accounts for a change of the cell’s fluorescence intensity by 2.66 FU. Thereby, also the distributed unspecific fluorescence of uninfected cells can be taken into account: U c (t , ϕ ) = U c ,ϕ (t )
I c (t , ϕ ) = I c ,ϕ (t ) with ϕ ∈ N, [1, ∞ ]
The change of behavior along ϕ is characterized by two processes: virus replication increases fluorescence intensities with the replication rate krep while virus release decreases it respectively with the release rate krel. These two processes describe the inner dynamics of the system. 2.1. Model equations It can be shown that growth and death of the uninfected cells can be neglected due to medium exchange, limited space on microcarriers and fast progression of infection. Therefore, only infection is considered for description of the uninfected cell’s behavior: dU c ,ϕ dt
= −kvi U c ,ϕ V
(1)
As an initial condition, uninfected cells are considered to be normally distributed over the logarithmically scaled fluorescence axis to ensure good agreement with flow cytometric data collected by Schulze-Horsel et al. [3]. Infected cells emanate from uninfected cells, intracellular virus replication starts and the number of infected cells deceases with the specific death rate kcd. As described above convection along ϕ occurs due to virus protein accumulation and release. Every step from one degree of fluorescence to another is associated with the intracellular production or release of one virus particle respectively, so that the actual degree of fluorescence of every infected cell is controlled by these two effects. For brevity only the equation for ϕ > 1 is shown: dI c ,ϕ dt
= k vi U c ,ϕ −1V − kcd I c ,ϕ − k rep (I c ,ϕ − I c ,ϕ −1 ) + k rel (I c ,ϕ +1 − I c ,ϕ )
(2)
Free virions emerge from infected cells with ϕ > 1 by means of virus release. They are able to attach to uninfected cells (kva) or degrade with time (kvd). ∞ ∞ dV = k rel ¦ I c ,ϕ −kvd V − k va ¦ U c ,ϕ V dt ϕ =2 ϕ =1
(3)
Additionally, dead cells are included in the process because intact dead cells show up in the flow cytometric data. For simplicity all dead cells are considered to stay intact and keep the specific ϕ they possessed at time of death.
3. Parameters As the focus of this work is on the further development of the model of Möhler et al. [4], parameter identification was skipped for the time being and the “best-fit” parameter
136
T. Müller et al.
set was adopted. It is worth noting that the parameters used here have the same significance as in the undistributed model, except for the replication rate krep which has been introduced for the present model; its value has been derived from the flow cytometric data by means of sum-of-least-squares method (data not shown). Initial conditions are in agreement with the same set of experimental data of Schulze-Horsel et al. [3]. Table 1 summarizes the applied parameters and initial conditions, which differ from the ones published by Möhler et al. [4, Tab. 1, p. 50]. Table 1. Applied parameter set and initial conditions (note, that not every virus particle is infectious and non infectious virions have to be considered) Parameter
Value
Unit
krep
502 3 120 360
h -1 106/ml 106/ml 106/ml
V0 (MOI = 0.025) V0 (MOI = 1.0) V0 (MOI = 3.0)
4. Simulation results All simulations were performed with the dynamic simulator DIVA and visualized with MATLAB. For simplicity the delay behavior between infection and virus release was reproduced by simply shifting the simulation results by tshift = 4.5 h [4]. 4.1. Outer dynamics Figure 1 shows the evolution of virus yields over time for two of the three observed initial conditions. There is no detectable difference between the present structured model and the unstructured approach of Möhler et al. [4]. That is because of the unstructured model being included in the structured model as the zeroth order moment.
Figure 1. Outer dynamics in comparison with model of Möhler et al. [4]: virus yield vs. time post infection for different MOI (circles: experimental results, solid line: unstructured model, dashed line: structured model, tshift = 4.5 h)
Population Balance Modeling of Influenza Virus Replication
137
Figure 2. Inner dynamics: number density function qc vs. fluorescence intensity for specific time points post infection. (dots: experimental results, solid line: simulation results, MOI = 3.0, tshift = 4.5 h)
138
T. Müller et al.
4.2. Inner dynamics The inner dynamics are determined by the cell distribution over the fluorescence changing with time. For comparability the cell concentrations have to be converted into number density functions, which are obtained by normalization with the overall cell concentration at the specific time point and division by the specific class width in logarithmic scale. All cells (uninfected, infected and dead) contribute to the distribution as they all show fluorescence. Figure 2 shows the comparison between simulation results and the flow cytometric data reported by Schulze-Horsel et al. [3] for MOI = 3.0. The simulation peak lags behind in the beginning and catches up for later time points, but the overall tendency of increasing mean values can be reproduced quite well. However, the present model has a drawback: for an unknown biological reason the experimental distributions fall back to smaller fluorescence intensities at later time points (data not shown). So far, this effect cannot be simulated with the presented model formulation adequately.
5. Conclusion A new deterministic population balance model with distributed cell populations has been presented. The model is based on the unstructured approach of Möhler et al. [4]. Concerning outer dynamics the present model is equivalent to the unstructured model which proved to be sufficient to predict virus yields for different initial conditions [4]. The characteristics of the inner dynamics can be simulated except of the decrease of fluorescence intensity at later time points. The biological reasons for this effect are unclear. Presumably there are more states that have to be considered during virus replication like intercellular communication, extent of apoptosis or specific stage in cell cycle. Future computational and experimental research will aim in this directions and concentrate on structured descriptions of the virus replication in mammalian cell culture.
References [1] J. Tree, C. Richardson, A. Fooks, J. Clegg, D. Looby, 2001. Comparison of large-scale mammalian cell culture systems with egg culture for the production of influenza virus A vaccine strains. Vaccine 19, 3444–3450. [2] Y. Genzel, R. Olmer, B. Schäfer, U. Reichl, 2006. Wave microcarrier cultivation of MDCK cells for influenza virus production in serum containing and serum-free media. Vaccine 24 (35–36), 6074–6084. [3] J. Schulze-Horsel, Y. Genzel, U. Reichl, 2007. Quantification of intracellular accumulation of M1 and NP of influenza A virus – monitoring of infection status of production cells during vaccine production by flow cytometry, Submitted to BioMedCentral Biotechnology. [4] L. Möhler, D. Flockerzi, H. Sann, U. Reichl, Apr. 2005. Mathematical model of influenza A virus production in large-scale microcarrier culture. Biotechnology and Bioengineering 90 (1), 46–58. [5] P. Licari, J. Bailey, 1992. Modeling the population dynamics of baculovirus-infected insect cells: optimizing infection strategies for enhanced recombinant protein yields. Biotechnology and Bioengineering 39 (4), 432–441. [6] D. Knipe, P. Howley, D. Griffin, 2001. Field’s virology, 4th Edition. Lippincott Williams & Wilkins, Philadelphia.
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
139
A population balance model approach for crystallization product engineering via distribution shaping control Zoltan K. Nagy Chemical Engineering Department. Loughborough University, Loughborough, LE11 3TU, United Kingdom
Abstract The paper presents a practical control approach, which can be used to directly design the shape of a crystal size distribution, to robustly achieve desired product properties. The control approach is implemented in a hierarchical structure where on the lower level a model-free crystallization control methodology, the supersaturation control, drives the system in the phase diagram, rather than in the time domain, whereas on the higher level a robust on-line model based optimization algorithm adapts the setpoint of the supersaturation controller to counteract the effects of changing operating conditions. The process is modeled using the population balance equation, which is solved using an efficient implementation of the method of characteristics. Keywords: distribution shaping control, population balance modeling, method of characteristics, optimal control, quadrature method of moments.
1. Introduction Crystallization is one of the key unit operations in pharmaceutical, food and fine chemicals industries. Despite the long history and widespread application of batch crystallization, there remains a disproportionate number of problems associated with its control [1], mainly related the complex nonlinear dynamics with non-ideal mixing, and various disturbances characteristic to these systems. The operating conditions of the crystallization process determine the physical properties of the products which are directly related to the crystal size distribution (CSD), shape or polymorphic form. These properties determine the efficiency of downstream operations, such as filtration, drying, and tablet formation, and the product effectiveness, such as bioavailability and shelflife. With the recent change of industrial procedures from Quality-by-Testing (QbT) to Quality-by-Design (QbD) and the advent of process analytical technology (PAT) initiative, especially in the pharmaceutical industries, approaches which can be used to design desired product properties are of great interest. The classical control objectives expressed in characteristics of the size distribution (e.g. maximize average size, minimize coefficient of variation) can lead to conservative and economically inefficient designs of the crystallization systems [2]. The paper presents an approach which can be used to directly design the shape of a crystal size distribution, to achieve desired product properties. Since dissolution rate depends on the shape of the CSD, when the resulting crystals represent the final product (e.g. drugs for inhalers) controlling the shape of the CSD can provide novel applications in the area of drug delivery, or environmentally friendly dosage of pesticides, where particular multimodal distributions can be designed to achieve desired concentration level of the active compound. The crystallization system is modeled via a population balance equation which is directly used in the
Z.K. Nagy
140
optimization procedure where the objective function is expressed in terms of the shape of the entire CSD. The population balance model (PBM) is solved using an efficient implementation of the method of characteristics [3] when nucleation and growth are the governing mechanisms, and with the quadrature method of moments (QMOM) when agglomeration and breakage are also considered [4]. It is shown that in special cases when constant supersaturation control is applied analytical solution of the PBM is possible for the case of generic power law growth kinetics. The optimization problem is solved using an efficient multistage approach implemented in the optimization package OptCon. The proposed approach is corroborated in the case of a simulated crystallization system.
2. Population balance modelling of the batch crystallization process 2.1. PBM with growth and nucleation kinetics only Considering a single growth direction with one characteristic length L , and a wellmixed crystallizer with growth and nucleation as the only dominating phenomena the population balance equation (PBE) has the form sfn (L, t ) s{G (S , L; Rg )fn (L, t )} B(S ; Rb )E(L0 , L) , st sL
(1)
where fn (L, t ) is the crystal size distribution expressed in the number density function (number of crystal per unit mass of slurry), t is time, G (S , L; R ) is the rate of crystal growth, B(S ; Rb ) is the nucleation rate, S = (C-Csat) is the supersaturation, C is the solute concentration, Csat = Csat(T) is the saturation concentration, and Rg and Rb are vectors of growth and nucleation kinetic parameters, respectively. Equation (1) can be transformed into a homogeneous hyperbolic equation with boundary condition f (L0 , t ) B(S )/G (S ) and initial condition given by the size distribution of seed, f (L, 0) fseed (L0 ) . The partial differential equation can be reduced to a system of ODEs by applying a combination of the method of characteristics (MoC) and method of moments (MoM). The aim of the MoC is to solve the PDE by finding characteristic curves in the L t plane that reduce the PDE to a system of ODEs. The L t plane is expressed in a parametric form by L L(2 ) and t t(2 ) , where the parameter 2 gives the measure of the distance along the characteristic curve. Therefore fn (L, t ) fn (L(2 ), t(2 )) , and applying the chain rule gives: g
dfn dL sfn dt sfn d 2 d 2 sL d 2 s t
.
(2)
Considering size independent growth and comparing (2) with (1) we find 2 t and the characteristic curve is given by dL G . dt
(3)
Adding (3) to the equations which results by applying the MoM, we can calculate the characteristic curve and boundary conditions f (L0 , t ) by the following ODEs,
A Population Balance Model Approach for Crystallization Product Engineering via Distribution Shaping Control
141
d N0 B dt d Nj G Nj 1 BLj0 , j 1, 2, 3 , (4) dt dL G dt with initial conditions x 0 [N0 (0), N1 (0), N2 (0), N3 (0), 0] where the jth moment Nj is
defined by Nj
¨
d
Lj fn (L, t )dL,
j 0, !, d .
(5)
C (t ) C (0) kv Sc (N3 (t ) N3 (0)) ,
(6)
0
The solute concentration is given by
where Sc is the density of crystals and kv the volumetric shape factor. 2.2. PBM with breakage and agglomeration kinetics The dynamic population balance equation for a closed homogenous system considering a single characteristic size is written,
1/ 3
1/ 3
3 3 3 3 fn M
d sfn L
L2 L C L M , M fn L M
¨ b L, M a M fn M dM ¨ dM 2/3 3 3 L 0 st 2 M
L
birth due to breakage
birth due to agglomeration
(7)
d s G L fn L
E 0, L B0 a L fn L fn L ¨ C L, M fn M dM
0 sL
nucleation death due to breakage growth
death due to agglomeration
where ȕ, a, G, B and b are the aggregation kernel, breakage kernel, growth rate, nucleation rate and the daughter particle size distribution, respectively. The quadrature method of moment (QMOM) is based on the transformation d
Nk
¨
N
fn L Lk dL x wi Lki
(8)
i 1
0
After moment transformation and applying the quadrature rule the model is given by N N N k /3 dNk 1 N wia Li b k, Li wi w j L3i L3j C Li , Lj wia Li Lki dt 2 i 1 j 1 i 1 i 1
birth due to breakage N
N
birth due to agglomeration
N
death due to breakage
(9)
wi Lki w j C Li , Lj k wi Lki 1G Li E 0, k B
i 1 j 1 i 1 nucleation
death due to agglomeration
growth
The breakage and agglomeration kernels depend on mixing conditions. Optimizing the power input to the system which determines the turbulent kinetic energy it is possible to minimize breakage or agglomeration.
Z.K. Nagy
142
3. Application of the batch NMPC for crystallization product design For the case studies crystallization of paracetamol in water was considered as the model system, for which both the 1D and 2D growth kinetics were determined, by performing D-optimal experimental design. Samples were taken every 10 minutes and the characteristic sizes were determined by using image analysis. Different product design problems were considered, when various objective functions expressed as function of the CSD ( f (CSD; R) ) were optimized, by determining the required temperature profile, seed characteristics (distribution and mass) as well as mixing characteristics (overall turbulent kinetic energy), which can be expressed by the generic robust formulation min{(1 w ) [ f (CSD; R)] wV [ f (CSD; R ]}
T (t ) Seed Mixing
(10)
where (¸) and V (¸) are the mean and variance of the performance index, respectively corresponding to the uncertain model parameter vector R . Equation (10) generally is subject to various operational, productivity and quality constraints. In the first case study the optimization problem is expressed as follows min
T (t ),mseed ,Lseed ,Tseed
{(1 w ) (fn (Lk , t f ; Rˆ) fndesired (Lk , t f ))2 wV [ fn (L, t f ; R ]} (11)
s.t.
k
Tmin b T (t ) b Tmax dT b Rmax dt C (t f ) b C max Rmin b
(12)
mseed ,min b mseed b mseed ,max Lseed ,min b Lseed b Lseed ,max Tseed ,min b Tseed b Tseed ,max
where Rˆ is the nominal parameter vector. The seed distribution is considered to be described by a Gaussian probability distribution function with mean Lseed and standard deviation Tseed . The optimization provided the optimal seed characteristics Lseed 56 Nm , Tseed 12 Nm and amount mseed 2.4 g . The temperature profile is given in Figure 1, together with the linear profile for comparison. For the linear profile the optimal seed characteristics were used as initial conditions. Figure 2 shows the microscopic images of the crystals obtained when the profiles in Figure 1 were implemented at a laboratory scale crystallizer. The entire evolution of the size distribution during the batch is given in Figure 3. It can be seen that the optimal operating policy results in a significant bias of the distribution toward large particle sizes. The schematic representation of the practical implementation of the approach is shown in Figure 5. The proposed control strategy involves two controllers: (i) a tracking controller that follows a reference trajectory in the phase diagram, and (ii) a supervising controller that adapts the reference to changing operating conditions. At near to optimal conditions, the operating curve is usually close to the nucleation curve and even small errors in the tracking can lead to spontaneous nucleation and compromised crystal quality. The feedback controller is designed that takes concentration and temperature
A Population Balance Model Approach for Crystallization Product Engineering via Distribution Shaping Control
143
measurements and adjusts the jacket temperature so that a predefined (using on openloop optimization design case) concentration vs. temperature operating is followed. The initial profile is predefined but it is adapted online using the model based predictive control approach. Concentration measurement is provided in the experimental implementation via ATR-UV/Vis coupled with robust chemometrics. Variations in operating conditions, such as quality and amount of seed, undesired secondary nucleation due to impurities in the system, disturbances in fluid dynamics, etc. require the adaptation of the operating curve both on-line and from batch to batch. The adaptation of the operating curve is especially important for complex organic molecules for which the metastable zone width might not be well defined and/or reproducible. The constrained optimization based nonlinear model predictive control strategy is used to estimate dynamic changes in shape and crystal size distribution. 32
(A)
T (qC)
31
30
(B)
29
28
0
40
80 Time (min)
120
160
0.04
pdf
0.03 0.02 0.01 0 0
80 60
200
40 400
L (Pm)
20 0
time (min)
Fig. 3. Evolution of the pdf along the whole batch for case B.
Probability density function
Fig. 1. The resulted optimal temperature profile Fig. 2. Microscopic images of the crystal products obtained with linear (A) and optimal (continuous line with plusses) and the linear cooling (B), using the optimal seed in both cases. cooling profile (dashed line).
0.6
Initial distribution
0.5 0.4
Optimized final distributon
0.3 0.2
Final distribution
0.1 0 0
200
400 600 L (Pm)
800
1000
Fig. 4. CSD in the case of controlled and uncontrolled agglomeration.
In the second case study the agglomeration is modeled by considering and hydrodynamic agglomeration kernel C (Li Lj )3 . An optimization problem similar to (10) is formulated but using the turbulent kinetic energy as optimization variable.
144
Z.K. Nagy
Figure 4 illustrate the results of the fluid dynamics optimization. The PBM with the agglomeration kernel is solved using the QMOM with four quadrature points, represented as bars on Figure 4. The distribution is reconstructed from the moments using a modified Gamma distribution with fourth order orthogonal Laguerre polynomials. In both cases bimodal distribution is obtained. The optimized final distribution shows significantly less agglomeration. In this case a perfectly mixed tank is considered with uniform kinetic energy in the volume. Current research considers the use of multi-compartmental model in conjunction with off-line CFD simulation to estimate the distribution of turbulent kinetic energy for optimized mixing conditions.
Fig. 5. Architecture for robust control of crystal habit and shape of CSD for batch cooling crystallization.
4. Conclusions A robust optimization based control algorithm is described, which is able to design crystalline product properties, via optimization of cooling profile, seed properties or hydrodynamics. The approach provides robust performance by taking the parametric uncertainties into account in a distributional multi-objective optimization framework. The crystallization model is solved using a combination of method of characteristics and standard method of moments or quadrature method of moments, leading to a computationally very efficient approach which can be used even in real time. The two level control strategy which includes at the lower level a supersaturation controller and a model based control on the higher level was implemented on a laboratory scale crystallizer. Both the simulation and experimental results illustrate the advantages of the proposed crystallization control approach. Acknowledgements The author would like to acknowledge the financial support from the Engineering and Physical Sciences Research Council (EPSRC) UK, project EP/E022294/1.
References [1] R. D. Braatz, Annual Reviews in Control, 26, (2002) 87. [2] M. Fujiwara, Z. K. Nagy, J. W. Chew, R. D. Braatz, Journal of Process Control, 15, (2005), 493. [3] R. LeVeque, Numerical Methods for Conservation Laws, Birkhauser, 1992. [4] R. McGraw, Aerosol Science and Technology, 27, (1997), 255.
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
145
Uncertainty patterns and sensitivity analysis of an indicator based process design framework Stavros Papadokonstantakisa, Agarwal Siddhartaa, Hirokazu Sugiyamaa, Konrad Hungerbühlera a
Swiss Federal Institute of Zurich, Wolfgang Paulistr. 10, Zurich 8093, Switzerland
ABSTRACT In recent years, many chemical companies have adopted the concept of sustainable development as a core business value. With focus on early phases of process design for continuous processes (Methyl Methacrylate process) this study tests the robustness of an established design framework, which integrates monetary, environmental, health and safety objectives. The framework comprises four stages of process modeling, each one being characterized by the available information for reaction route, yield, reaction time and separation scheme. Since several important factors are available in detail only at later phases of process design, a variety of evaluation indicators is used, which are then aggregated to a total score, realizing a multi-objective assessment. Although this is a popular approach in chemical engineering, especially when the development of rigorous models appears to be problematic or time consuming, the uncertainty issues arising must be clearly identified and analyzed, in order for the decision-maker to be able to evaluate correctly the value and limitations of the framework. The heuristical definition of the evaluation indicators, the experience based and often process specific weighting factors, the unknown nature of interactions between the aforementioned parameters, and the relative ranking based on type of designs taken into account form the ensemble of major uncertainty sources. The present study systematically detects the conditions under which these uncertainties become important and focuses more on those cases that the implementation of such a framework would fail to reach a statistically significant conclusion. A variety of uncertainty patterns and sensitivity analysis methods were applied for each defined stage and the proposed analysis is demonstrated on the design of a Methyl Methacrylate continuous process, considering six different synthesis routes. The crucial limitations identified in the results set the framework boundaries, assisting in this way the decision-maker to evaluate its scope and importance. Keywords: early phase process design, multi-objective assessment, heuristical indicators, uncertainty patterns.
1. INTRODUCTION Among several possible methods for such multi objective decision-making, e.g. spider plots [1] or Principal Component Analysis (PCA) for comparing various Safety, Health and Environmental aspects [2], the present study uses an aggregation approach, i.e.
S. Papadokonstantakis et al.
146
Design stages
different indicator results are aggregated into a single evaluation score using weighting factors [3]. Process Chemistry I (PCI)
Process Chemistry II (PCII)
Conceptual Design I (CDI)
Reaction
Reaction
+ Separation + Waste treatment
+ Equipment
Model includes
Stoichiometry, 100% yield (ideal)
Conversion, selectivity, auxiliary, catalyst, solvent, byproduct, heat of reaction
Shortcut process models, simple property data
Rigorous process models, non-ideality, reaction kinetics, detailed property data
Decision structures
No decision forced screen routes with serious problems
Select some reaction routes
Considered aspects
D1 Raw material cost Raw material cost (theoretical minimum) (updated)
Supplemental indicator
Multiobjective evaluation indicators
Economic performance Proxy for gate-to-gate costs /environ. impacts
Conceptual Design II (CDII)
Select process Optimize parameters option(s) &/or route(s) by sensitivity analysis by multiobj. evaluation of all feasible options D2 D3 D4 Production cost
Net present value
Mass Loss Indices (MLI)
Energy Loss Index (ELI)
CED in raw material production (theoretical minimum)
CED in raw material production (updated)
Cradle-to-gate CED
Cradle-to-gate CED (updated)
Hazard in E/H/S
EHS method (substance-level)
EHS method (incl. reaction mass)
EHS method (incl. process mass)
EHS method (updated)
Technical aspects
#Reaction steps; Raw material availability; Patents; Blacklist substances
Technical problems (e.g. long-term catalyst activity)
Process complexity
Equipment specification
Life-cycle environmental impacts
Figure 1: Overview of the framework: definition of design stages and appropriate modeling approaches as well as evaluation indicators for each stage.
This process design framework includes four stages of process modelling and multiobjective decision-making. Focusing on early design phase, Process Chemistry I/II and Conceptual Design I/II, are defined according to the available information as a basis for process modelling and assessment. For each defined stage, appropriate modelling methods and evaluation indicators regarding economy, life-cycle environmental impacts, EHS hazard and technical aspects have been selected. Based on the evaluation results, multi-objective decision-making is performed systematically at each stage (Figure 1). This framework has been previously evaluated in a case study (Methyl Methacrylate, MMA), where it was mimicked step-by-step with 6 synthesis routes as a starting point. By comparing the evaluation profile of these six routes over different stages, several factors were identified that are available in detail only at later stages, and which cause significant updates to the results. An example of the aggregation procedure r
in this framework is depicted in Figure 2. X s ,i is the evaluation indicator of route r at design stage s (i.e. from Process Chemistry II to Conceptual Design II ) in considered category i, (i.e.
Esr , Psr , Lrs , SH sr , HH sr , EH sr ), the different elements being the
Uncertainty Patterns and Sensitivity Analysis
147
evaluation indicators for economy, proxy for gate-to-gate energy related economic and environmental impacts, life-cycle environmental impacts, and hazards in safety, health and environment, respectively. Before aggregation, the indicator values are normalized by the maximum (i.e. the worst) indicator value of all routes in the respective category i, as follows:
X
r s ,i
=
X sr,i max( X sr,i ) r
Level 1: Normalized scores
X
r PCII ,i
Raw mat. cost: E
Level 2: Mid-point scores
Aggregation step 1
w1,i
M
r PCII , j
Level 3: Total score
Aggregation step 2
r TPCII
w2 , j
x w1,RM-Cost(=0.77)
+
Cost
+
CED
x w2,Cost(=0.50)
x w1,ELI-Cost(=0.23) Proxy by ELI: P
Raw mat. CED: L
Safety hazard: SH
Health hazard: HH Env. hazard: EH
x w1,ELI-CED(=0.23)
x w2,CED(=0.20)
x w1,RM-CED(=0.77)
+
Total score
x w1,S(=0.40)
x w1,H(=0.20)
+
Hazard
x w2,Hazard(=0.30)
x w1,E(=0.40)
Figure 2: Aggregation scheme at Process Chemistry II. Values of weighting factors are those used in the case study.
From the normalized scores at Level 1 three mid-point scores are calculated (Aggregation Step 1 in Figure 2), in cost, overall cumulative energy demand (CED) and hazard (Level 2). In aggregation step 1, weighting factors within cost category are based on industrial statistics about the ratio of raw material and separation cost. The same weighting factors are applied in CED category, for which such empirical values were not available. The adopted values are from commodity industry and in other processes weights can be different, e.g. in fine or specialty chemicals raw material costs are typically higher. Within the hazard category, the indicated weighting factors are chosen according to the respective number of sub-categories, i.e. 4 in safety, 2 in health and 4 in environment. In aggregation step 2 the mid-point scores (Level 2) are aggregated in order to provide the final total score (Level 3). In this second aggregation step the weighting factors reflect company’s culture to rank cost, CED and hazard.
148
S. Papadokonstantakis et al.
2. UNCERTAINTY ISSUES AND SENSITIVIY ANALYSIS IN THE FRAMEWORK Despite the promising results after the framework implementation in a complex case study, the assessment of the framework robustness should consider the uncertainties involved in it. These could arise from subjective scaling and weighting of various parameters in the definition of indicators, subjective weighting in the aggregation steps, unknown significance level in differences of the indicator values, as well as limited coverage of the field under consideration for each indicator Among these different sources of uncertainty the present study focuses on the impact of uncertainty in the indicator values and the weights aggregating them, in particular on the identification of those regions where the selection between the best route and the rest becomes statistically insignificant. This problem was approached by examining the ratios of weighting factors which represent the order of relative importance of an indicator or mid-point score over the other. Each defined weight ratio was updated from each original value using a gradient descent method to the direction of minimization of the total scores differences. At each update step of this weight ratio the indicators values were also updated using the same approach, and an uncertainty was incorporated in terms of sampling from a normal distribution. Those regions were identified in which a statistical t-test was indicating that the total score of the best route is not significantly different from the one of its competing route. Following this approach a variety of scenarios was tested, regarding the width of the distribution depicting the uncertainty effect, the combinations of weight ratios and indicator values considered uncertain, the normalization effect based on the worst considered route, and the correlations between the indicators.
3. RESULTS AND ANALYSIS The aforementioned approach for detecting the impact of uncertainties in the regions of specified weight and indicator values was implemented in the MMA case study. The respective MMA data regarding routes chemistry and process information can be found in open literature [4]. Some typical results are presented in Figure 3. For each step of the outer loop of weight ratios update, an inner loop of indicators update is executed a predefined number of times. For each route r the algorithm is updating the indicator X according to the respective first-order partial derivative: X(t) = X(t-1) - Ș ∂ (¨Total Score)/ ∂ X where (¨Total Score) = Total Score route r – Total Score route best.
Uncertainty Patterns and Sensitivity Analysis
149
Figure 3: The effect of uncertainty in combinations of indicator values with a sequentially forward selection.
At each step of the indicator update, the new value of the indicator is used as the mean of a normal distribution with predefined width, which represents the imposed uncertainty pattern. This results in a distribution of the total score for each route, which is compared with the respective distribution of total score of the best route using a t-test for means. In this way it can be identified which indicator is the “fastest” in affecting the inference based on the total score, “fastest” meaning requiring the minimum percentage change. In this procedure of indicators updating the value of the indicator for the worst route is kept constnat in order not to change the normalization of the system. Since the weight ratios remain constant for all routes, their updating step, which is also calculated on the basis of the first-order partial derivative, is averaged using “sum of digits” method, (i.e. since there are 6 routes considered, the weight ratio update based
150
S. Papadokonstantakis et al.
on the second best route receives a weight of 5/15, the third best one 4/15 etc. and finaly the weighted mean of all indicated updating steps determines the weight ratio update). In Figure 3 x-axis represents the number of update steps taken to shift the weight ratios, while y-axis represents the range of percentage change which is required in the indicator values for the decision to become uncertain. The error bars indicate the range of percentage change required for a statistically insignificant decision, while straight horizontal lines refer to indicators whose uncertainty pattern has not influenced the inference at all. For example, an uncertainty in indicator E between 10 and 15% (Figure 3, first graph) can cause a statistically insignificant decision for the selection of the best route. The uncertainty in all other indicators, when taken alone, is not affecting the descision-making. Once such a result has been reached, a sequentially forward selection is performed, i.e couples of E, which is the most sensitive indicator when considered alone, with other indicators are tested and when the most sensitive couple is identified, it forms the base for considering triplets and so on. The results of this procedure are depicted in the rest of the graphs of Figure 3, where it can be seen that the total score is more sensitive to the couple E-HH and the triplet E-HH-L respectively.
4. CONCLUSIONS & OUTLOOK Our analysis has quantified some expected trends but has also revealed some cases for further analysis. The main study result is that the importance of uncertainty in indicators seems to be greater than that of the weights. Therefore, further analysis needs to be carried out to determine and if possible correct the primary source of uncertainty in indicators which arises from their definition and data accuracy used in their calculation, while uncertainty in weights is a matter of design.
REFERENCES [1] J. Gupta, D. Edwards, 2003, A simple graphical method for measuring inherent safety, Journal of Hazardous Materials, 104, 15-30. [2] R. Srinivasan, N. Nhan, 2007, A statistical approach for evaluating inherent benigness of chemical process in early design stages, Process Safety and Environmental Protection Official journal of the European Federation of Chemical Engineering: Part B, Available Online. [3] H. Sugiyama, U. Fischer, M. Hirao, K. Hungerbühler, 2006, A chemical process design framework including different stages of environmental, healt and safety assessment, Computers Aided Chemical Engineering, 21, Part 1, 1021-1026. [4] H. Sugiyama, Decision-making framework for chemical process design, PhD Diss. ETH No. 17186.
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
151
Batch Scheduling With Intermediate Due Dates Using Timed Automata Models Subanatarajan Subbiaha, Thomas Tometzkia, Sebastian Engella a
Process Control Laboratory (BCI-AST), Department of Biochemical and Chemical Engineering, University of Dortmund, 44221 Dortmund, Germany.
Abstract In the process industries, the problem of scheduling multi-product batch plants to satisfy the demand for various end-products within specified due dates occurs frequently. In contrast to the state-of-the art approach of using mathematical model formulations to solve such scheduling problems, an alternative approach is to use reachability analysis for timed automata (TA). In this paper, we discuss an extension of our earlier work on scheduling using TA models where the problem of makespan minimization was addressed. We extend the formulation to the meeting of due dates, modelled as causing additional costs (e.g. penalties for late delivery and storage costs for early production). The proposed solution by reachability analysis of priced timed automata is tested on a case study to demonstrate its successful application. Keywords: Batch plants, scheduling, timed automata, reachability analysis.
1. Introduction Multi-product and multi-purpose batch plants offer the advantage of increased flexibility with respect to range of recipes that can be handled and the production volumes compared to continuous plants. Batch scheduling is particularly difficult due to numerous constraints arising from the process topology, the connection between the pieces of equipments, inventory policies, material transfers, batch sizes, batch processing times, demand patterns, changeover procedures, resource constraints, timing constraints, cost functions and uncertainties. Particularly in batch plants, the problem of satisfying the demands of the various end-products within due dates occurs very often. Most of the solution approaches proposed in the last years solve such problems by modeling them by mathematical programming formulations (MILP or MINLP) and applying commercial solvers. In [8], the authors proposed a slot-based formulation with a continuous time representation which they showed to be suitable for network-based production schemes involving mass balances and product flows. The work presented in [7] proposed a MILP formulation in which the product stocks and mass balance constraints were ignored by fixing the batch sizes to discrete values. The formulation was tested on scheduling a real-life example which resulted in a model with reduced complexity and the results showed increased solution efficiency. The contribution [6] describes an extension of the previous work on continuous time formulations to deal with intermediate due dates with significant improvement in computational efficiency. However, the application of these approaches is hindered by the effort needed to formulate mathematical models and requires experience in algebraic modeling and a deep knowledge of the solver and its internal algorithms. Recently, the approach to solve scheduling problems by reachability analysis for timed automata has gained great attention. The framework of TA has been originally proposed
152
S. Subbiah et al.
by [1] to model timed systems with discrete dynamics. User friendly tools (e.g. Uppaal [3], TAOpt [5]). have been developed to model and to analyze such systems. Previous work on the TA based approach to scheduling problems with makespan minimization on hard job shop benchmarks were reported in [2] and [5]. The particular appeal of this approach comes from the modular and partly graphical modeling which enables inexperienced users to build models. Another advantage is the availability of powerful search algorithms that can be modified and extended for special purposes. The primary objective of this work is to extend the TA based formulation to address the problem of scheduling batch processes with multiple release dates and intermediate due dates with the objective of minimizing tardiness. In the TA based approach the resources, recipes and additional timing constraints are modeled individually as sets of priced timed automata with costs for transitions and cost rates for staying in locations. The sets of individual automata are synchronized through synchronization labels and are composed by parallel composition to form a global automaton. The global automaton has an initial location where no operations have been started and at least one target location where all operations required to produce the demanded quantities of end-products within the specified due dates have been finished. A cost optimal symbolic reachability analysis is performed on the composed automaton to derive schedules with the objective of minimizing the overall cost incurred as the sum of costs due to transitions and the integral costs for staying in locations.
2. Test Problem In order to illustrate the approach, a case study is considered. The case study is a multi-stage multiproduct chemical batch plant demonstrator with a plant topology similar to flexible flow shops. Two recipes to produce the end-products are given. The endproducts blue (B) and green (G) are produced from three raw materials, yellow (Y), red (R) and white (W). Each batch of the product results from two batches of the raw materials. The production process considered is: two batches of material Y and W reacts to produce one batch of Figure 1: P&ID of the multi-product batch plant product B ; similarly two batches of R and W reacts to produce one batch of product G. The plant consists of 3 stages in which the first stage consists of three buffer tanks which are used to store the raw materials Y, R and W (see Fig. 1). The buffer tanks in the first stage may contain at most only two batches of the raw materials. The second stage consists of three reactors that perform the reaction process to produce the end-products. Each reactor can be filled from each raw material buffer tank in the first stage; implying that it is possible to produce either product B or product G in each reactor. After processing the materials, a reactor may contain at most one batch of the product. The third stage consists of two buffer tanks which are used to store the end-products B and G exclusively. Each of the buffer tanks
Batch Scheduling with Intermediate Due Dates Using Timed Automata Models
153
has a maximum capacity to store three batches of the respective products. Operations once started should be finished without any interruption (non-preemptive scheduling). The production of one batch of a recipe (B or G) consists of 6 operations and involves timing constraints between individual operations. After the materials are processed by the reactors the end-products must be drained into the buffer tanks in the third stage immediately imposing a zero-wait constraint between the operations. We consider the task to produce 23 orders in total, 12 batches of product B and 11 batches of product G, for which 138 operations have to be scheduled. Each batch of raw material is released at different points of time and for every 3 batches of a product a due date has to be met. The release dates and the due dates are known in advance and a penalty cost is incurred for missing a due date. The objective is to produce the demanded amount of products with minimal penalty cost.
3. Background of Timed Automata Timed Automata (TA) are finite state automata extended by the notion of clocks to model discrete event systems with timed behaviour. A timed automata is defined by a tuple, TA = ( L , C , Ĭ , inv , l0 , F ) in which, L represents the finite set of discrete locations, l0 , F ∈ L , where l0 represents the initial location and F represents the set of final locations. The set of clocks assigned to the TA are represented by C. The relation Ĭ ⊂ L × ϕ × Act × U(C) × L represents the set of transitions between the locations where, ϕ is a set of guards specified as conjunctions of constraints of the form ci ⊗ n or ci - cj ⊗ n , where ci , cj ∈ C, ⊗ ∈ { , = = , , < , >, ≠ } and n ∈ N. The set of actions (e.g. invoking a new event or changing the value of a variable) while taking a transition is denoted by Act. U(C) represent the set of clocks that are reset to zero after taking the transition. inv represent a set of invariants that assign conditions for staying in locations. The invariant conditions must evaluate to true when the corresponding location is active and the automaton is forced to leave the location when the invariant evaluates to false. A transition between a source location l and target location l' with a guard g ∈ ϕ (C), performing an action a ∈ Act and resetting the clocks r ∈ U(C) is denoted by (l, g, a, r, l'). A transition can occur only when the guard conditions are satisfied. An extension of TA with the notion of costs is known as priced TA [4]. A priced TA is equipped with an additional function P : L * Ĭ → R0 which assign cost rates to locations and costs to transitions. The cost of staying in a location with cost rate ƛ for d time units is given by P(L) = ƛ · d . The scheduling problem is modeled using the priced TA framework in a modular fashion. The resources, jobs and timing constraints are modelled as sets of priced TA. The interaction between the automata sets are established by synchronized transitions and shared variables. Two transitions are said to be synchronized when they have the same synchronization labels and the corresponding automata can only change their locations simultaneously. Such sets of automata are composed using parallel composition thereby forming one composed global automaton by considering the synchronization labels. The composed automaton represents the model of the complete system and a cost-optimal reachability analysis can be performed in order to derive schedules. The reachability analysis technique starts from the initial location of the composed automaton that represents the initial state of the system and evaluates the successor states created by a successor relation. This enumerative process is continued until the final target location specified is reached with minimal cost. In the search, branch-and-bound techniques are used in order to explore the solution space quickly.
154
S. Subbiah et al.
4. Priced TA model The idea of modeling the scheduling problem using priced TA is explained using a simple example process. Consider a process that consists of tasks T1 and T2 performed in resources R1 and R2, respectively. Let task T1 be followed by T2 and the time taken to perform T1 be p1 and T2 be p2. The process has a release date ri and a due date di. A storage cost is incurred if the process is finished before the due date and a penalty cost is incurred for missing the due date. The basic principles of modeling the process using a priced timed automata is shown in Fig. 2. The automata on the left hand side model the process and the automata on the right hand side model the required resources. The upper automaton on the left models the release date and the operations, the due date with the penalty cost is modeled by the automaton below. Initially, the process automaton is in the location wait T1 and wait dd representing that the process has not yet started. The release date ri of the process is modeled by the guard ci ri . Once the guard is enabled and the resource R1 is available, the first automaton can take the transition from wait T1 to exec T1 thereby allocating the resource and simultaneously making the resource automaton R1 transit from idle to busy by the synchronization label α1. The clock ci is reset to measure the duration of the task T1 modeled by the invariant ci p1 and the guard ci p1. After p1 time units have elapsed the first part of the process automaton is forced to transit from location exec T1 to wait T2 modeling that task T1 is finished and the process is waiting to perform task T2. At the same time the resource automaton R1 transits back from busy to idle representing that the resource is released by the synchronization labeled by ϕ1. The operation of performing task T2 in R2 is modeled in a similar fashion. Basically the α transitions represent the allocation of a resource and the ϕ transitions represent the release of a resource. The second automaton on the left at the start of the run takes a transition from wait dd to exec dd irrespective of the transitions in the first part of the process automata. At the same time when the transition takes place, the clock cd is reset to measure the due date using the invariant cd di and guard cd di. In the case where the process is finished before the due date, i.e. the second part of the process automaton is still in the state exec dd and the first part is in state exec T2 with the guard ci p2 enabled, the first process automaton transits to the location early and stays there until the due date is reached. The incurred storage cost is calculated using the cost rate at the location early and the time period for which the location is active. Once the due date is reached then the synchronized transition labeled by į is taken thereby representing the termination of the process. On the other hand, for the case where the finishing time of the process is beyond the due date, i.e. the upper process automaton is still in one of the states before early and the second automaton is in state exec dd with the guard cd di enabled; the wait T1
exec T1 α1
ϕ1
wait T2
ci > ri ci > p1 ci := 0 ci < p1
wait dd
exec dd
cd < d i
ci := 0
exec T2
ci < p 2
tardy cd > di
cd := 0
α2
early ϕ2
α1
finish’ δ
ci > p2
idle
Resource R1 α2
finish’’ δ
cd = delay cost
Example Process
busy ϕ1
ci = storage cost
idle
busy ϕ2 Resource R2
Resource Automata
Figure 2: Priced TA model of the simple example process and the corresponding resources
Batch Scheduling with Intermediate Due Dates Using Timed Automata Models
155
second automaton transits to the location tardy and stays there waiting for the last operation of the process to finish. The incurred delay cost is calculated using the cost rate at the location tardy and the time period for which the location tardy is active. Once task T2 is finished then the synchronized transition labeled by į is taken thereby representing the end of the process. Apart from the individual clock a global clock is present to model the completion time of the process. Using these principles, the priced TA model for the case study considered can be derived by defining interacting priced TA for the recipes and resources. Each production order (a job) consisting of a release date, due date, recipe number, storage cost and delay cost is modeled as a priced TA with an individual clock. The general structure of each job automaton depends on the corresponding topology of the recipe. Operations that can be performed in alternative resources are modeled using alternative transitions starting from the same location. The parallel operations in a recipe such as pumping the raw materials yellow (red) and white to produce blue (green) is modeled by individual automata with synchronization points established by synchronized transitions. The zero-wait constraint in the process is modeled by imposing the waiting location of the corresponding operation as an urgent location. A reactor which is allocated for preparing the end-product is occupied when the operation of draining the corresponding raw material starts. It is released only after finishing the draining of the end-product to the corresponding buffer tank. This is modeled by synchronizing the transition that represents the start of the draining operation of the raw material in the recipe automata with the transition that represents the allocation of the corresponding (reactor) resource automaton, and the transition that represents the finish of the draining operation of the end-product in the recipe automata is synchronized with the transition that represents the release of the corresponding (reactor) resource automaton.
5. Experimental Results In order to test the proposed modeling and solution approach the prototypic tool TAOpt developed at the Process Control Laboratory is used. It consist of a reachability algorithm for priced TA to perform a symbolic reachability analysis to explore the solution space and to derive production schedules with minimal cost. Various search space reduction techniques introduced in [5] are realized in order to prune parts of the solution space that lead to sub-optimal solutions. Given the process information, priced TA models are created in a modular fashion automatically by TAOpt. The process information consist of the resource data (capacity, equipment purpose), the recipe data (duration of operations, sequence of operations, timing constraints between tasks, materials processed) and the table of production orders (due date, release date, delay cost). Once the individual automata have been created the composed automaton is realized on the fly and the reachability tree is created. The reachability tree consists of nodes and transitions; a node represents a combination of state and clock valuations of all clocks including the global clock. A cost-optimal reachability analysis is performed starting from the initial location where no jobs are started and trying to find a path to the target location where all jobs are finished within the defined due date. The objective is to minimize the penalty cost. The search algorithm used to explore the reachability graph was a combination of maximum depth and minimum cost. The search space reduction techniques weak non-laziness, sleep-set method and passed list inclusions were employed to prune parts of the reachability tree (for detailed explanations see [5]). The number of nodes for all the tests performed with TAOpt was limited to 2.6 million explored nodes. A continuous time based formulation with resource constraints
156
S. Subbiah et al.
Table 1. Tardiness minimization: (Tcpu) computation time in CPU sec., (Tfirst) computation time required to reach the first feasible solution, (Obj.) objective value, (Opt.sol.nodes) total number of nodes explored to reach the optimal solution, (disc.) number of discrete variables, (cont.) number of continuous variables, (eqns.) total number of equations.
Orders
Tcpu
6 12 18 23
53 75 1082 1930
TAOpt 1st sol Tfirst Obj. 0.02 320 0.04 74 0.05 105 0.08 115
Opt.Sol. nodes 330302 335548 1670659 1998302
Tcpu 66 3037 11885 30621
GAMS/CPLEX 1st sol disc. Tfirst Obj. 66 0 1566 3037 0 3132 3629 1 4640 22325 4 6148
cont.
eqns.
3913 6635 9265 11895
16803 36706 60016 87382
presented in [6] was implemented and tested. The TA based solution approach was compared with the MILP-based solution approach for different instances of the test problem. The number of event points considered for the instances with 6, 12, 18 and 23 production orders were 27, 54, 80 and 106, respectively. The objective value of the optimal solution for all the instances was zero. The MILP model was solved with GAMS 22.5 and CPLEX 10.2. For CPLEX the standard configuration with an optimality gap of 0 was chosen. Both approaches were tested on a test environment of a 3.06 GHz Xeon machine with 2 GB memory and Linux O.S. The results obtained for various instances considered are shown in Tab.1. The investigation clearly revealed that both the approaches could reach the optimal solution with zero penalty cost. However TAOpt could compute the first feasible solution and the optimal solution faster compared to the approach proposed in [6]. Except for the first instance for all other instances considered CPLEX took more than 3000 sec to compute the first feasible solution.
6. Conclusions This work presents a successful application of the TA based approach to solve production scheduling with multiple release dates and intermediate due dates and the test results revealed that the TA based approach is competitive compared to state-of-art approaches. Future work will investigate on using decomposition techniques to solve large scale problems and employing the TA based optimization algorithm to solve them. The authors gratefully acknowledge the financial support from the NRW Graduate School of Production Engineering and Logistics at Universität Dortmund.
References 1. 2. 3. 4. 5. 6. 7. 8.
R. Alur and D.L. Dill, 1994, A theory of timed automata. Y. Abdeddaim and O. Maler, 2001, Job-shop scheduling using timed automata. K.G. Larsen, P.Pettersson and W. Yi, 1997, UPPAAL in a nutshell. G. Behrman, A. Fehnker, T.S. Hune, K.G. Larsen, P.Pettersson, J. Romijn and F.W. Vaandrager, 2001, Minimum-cost reachability for linearly priced timed automata. S. Panek, S. Engell, and O. Stursberg, 2006, Efficient synthesis of production schedules by optimization of timed automata. M.G. Ierapetritou, C. Floudas, 1999. Effective Continuous-Time Formulation for ShortTerm scheduling: III. Multiple intermediate due dates. S. Panek, S. Engell, and C. Lessner, 2005, Scheduling of a pipeless multi-product batch plant using mixed-integer programming combined with heuristics, Proc. ESCAPE. J. M. Pinto and I.E. Grosmann, 1994, Optimal cyclic scheduling of multistage continuous multiproduct plants, Comp. and Chem. Eng. 18.
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
157
A Decomposition Approach to Short-Term Scheduling of Multi-Purpose Batch Processes Norbert Trautmann,a Rafael Fink,b Hanno Sagebiel,b Christoph Schwindtb a
University of Bern, Schützenmattstrasse 14, 3012 Bern, Switzerland Clausthal University of Technology, Julius-Albert-Straße 2, 38678 ClausthalZellerfeld, Germany
b
Abstract Batch processes are generally executed on production plants consisting of multi-purpose processing units and storage facilities of limited capacity. We deal with the problem of computing a minimum-makespan production schedule for given primary requirements. Our solution approach is based on a decomposition of the problem into two subproblems. The first subproblem consists in computing an appropriate set of batches for each process. We present a novel formulation of this problem as a mixed-integer linear program of moderate size. The second subproblem is to schedule the processing of these batches on the processing units subject to material-availability and storage-capacity constraints. We tackle the latter problem with a new priority-rule based scheduling method. Computational experience with a sample production process presented in Maravelias and Grossmann (2004) shows that with the decomposition method near-optimal production schedules can be computed in a very small amount of CPU time. Keywords: Multi-purpose batch plants, Scheduling, Decomposition, MILP
1. Introduction In the process industries, low volumes of multiple products are typically produced on multi-purpose batch plants. In batch production mode, the total requirements for the final products and the intermediates are split into batches. To process a batch, first the inputs are loaded into a processing unit, then a transformation process is executed, and finally the output is unloaded from the unit. We consider multi-purpose processing units, which can operate different processes. The duration of a process depends on the processing unit used. Between consecutive executions of different processes in a processing unit, a changeover with sequence-dependent duration is necessary. The minimum and maximum filling levels of a processing unit give rise to a lower and an upper bound on the batch size. In general, raw materials, intermediates, and final products can be stored in storage facilities of finite capacity. Some products are perishable and therefore must be consumed immediately after they have been produced. The short-term scheduling of multi-purpose batch plants has been widely discussed in the literature. Recent reviews can be found in Floudas and Lin (2004), Burkard and Hatzl (2005), and Méndez et al. (2006). Roughly speaking, monolithic and decomposition approaches can be distinguished. The major limitation of the former approaches consists in the impractical amount of computation time which is required for solving problem instances of practical size (cf. Maravelias and Grossmann 2004). Decomposition approaches divide the problem into a planning and a scheduling problem. Planning determines the batch size and the number of executions for each process, and scheduling
158
N. Trautmann et al.
allocates the processing units and storage facilities over time to the processing of the corresponding batches (cf. Neumann et al. 2002). In this paper, we present a novel formulation of the planning problem, which allows for considering alternative processing units with unit-specific lower and upper bounds on the batch sizes. In contrast to the nonlinear model presented in Trautmann and Schwindt (2005), the new formulation represents a mixed-integer linear program, which can be solved to optimality using standard mathematical programming software. For approximately solving the resulting scheduling problem, we propose a priority-rule based method. The remainder of this paper is organized as follows. In Section 2, we formulate the planning problem as a mixed-integer linear program. In Section 3, we present our schedule-generation scheme for the scheduling problem. In Section 4, we report the results of an experimental performance analysis that is based on a sample production process presented in Maravelias and Grossmann (2004).
2. Planning Problem 2.1. Problem Statement In the following, we interpret each combination of a transformation process and a processing unit as a task. For example, if two processing units are available for executing a process, then we define two tasks for this process. The planning problem consists in determining the batch size and the number of executions for each task such that the given primary requirements for final products are satisfied, the prescribed intervals for the batch sizes are observed, each perishable product can be consumed immediately after production, and the total bottleneck workload is minimized. 2.2. Formulation as a Mixed-Integer Linear Program In our model formulation, we use the following notation: Sets G set of all groups of processing units P , P p set of all products, set of all perishable products 7 set of all tasks 7S , 7S set of all tasks producing product S , set of all tasks consuming product S 7X set of all tasks that can be processed on unit X UJ set of all processing units in group J Parameters DWS proportion of product S in batch size of task W ( 0 for input products, ! 0 for output products) E , E W lower bound on batch size of task W , upper bound on batch size of task W W
QW upper bound on number of executions of task W US primary requirements of product S V S , TS storage capacity for product S , initial stock of product S Variables EW , EWP batch size of task W , batch size of P -th execution of task W HWP binary; equal to 1, if task W is executed at least P times, and 0, otherwise ZJ workload of group J of processing units
Short-Term of Multi-Purpose Batch Processes
159
2.2.1. Constraints The batch sizes must be chosen within the prescribed bounds, i.e.,
E W d EW d E W
( W 7 )
(1)
and such that for each perishable product S P p , the amount consumed by one execution of any task W 7S equals the amount produced by one execution of any task W '7S , i.e.,
DW ' S EW '
( S P p ; W ,W ' 7S u7S )
DWS EW
(2)
The final inventory of product S P must be sufficiently large to satisfy the primary requirements US , but it must not exceed the given storage capacity V S , i.e., QW
US d T S ¦ DWS ¦ EWP d US V S W T
(S P )
(3)
P 1
Eventually, we link the variables EW , EWP , and HWP as follows: 0 d EWP d EW
EW (1 İ IJȝ ) E W d EWP d H WP E W
(W T; P
1, ,Q W )
(4)
It is readily seen (cf. Neumann et al. 2002) that inequalities (4) imply the equivalences HWP 1 EWP ! 0 EWP EW ( W T ; P 1,,Q W ). The linear ordering of the binary variables HWP belonging to the same task W serves to reduce the size of the feasible region significantly without any loss of generality:
H W1 t H W2 t t H WQW
(W T )
(5)
2.2.2. Objective Function Our primary objective is to minimize the total bottleneck workload, which we compute as follows. We divide the processing units into as many groups as possible in such a way that first, each processing unit belongs to exactly one group and second, each transformation process can only be executed on processing units of one and the same group. The set of all these groups is denoted by G . The bottleneck of group J G is the processing unit with the maximum potential workload maxXU J ¦W T pW ¦QPW 1H WP , X where pW denotes the processing time of task W ; we refer to the workload of this bottleneck unit as the workload ZJ of group J G , i.e., QW
ZJ t ¦ pW ¦ H WP W TX
( J G;X U J )
P 1
(6)
Often there are several feasible solutions minimizing the total bottleneck workload. Therefore we additionally try to minimize the workload on the non-bottleneck units (second-order criterion) and the total unneeded inventory (third-order criterion). With G1 and G 2 being sufficiently small constants, we formulate our objective function QW
QW
P P ¦ ZJ G1 ¦ pW ¦ H W G 2 ¦ ¦ DWS ¦ EW
J G
W T
P 1
S P W 7
P 1
(7)
160
N. Trautmann et al.
Optimization Problem In sum, the planning problem reads as follows:
P
Min. (7) ° ®s.t. (1) to (6) ° H WP ^0,1` W 7 , P ¯
1, ,Q W
3. Scheduling Problem 3.1. Problem Statement A solution to planning problem (P) provides us with the set of task executions yielding the required amounts of intermediate and final products. For what follows we refer to a task execution as an operation, and O denotes the set of all operations. The scheduling problem consists in determining a start time S i t 0 for each operation i O in such a way that no two operations are processed simultaneously on the same processing unit, the processing units can be changed over between consecutive operations, sufficient amounts of the input materials are in stock at the start of each operation, there is enough storage space available for stocking the output products at the completion time of each operation, and the completion time of the last operation (i.e., the production makespan) is minimized. The immediate consumption of perishable intermediates is ensured by associating each product S P p with a fictitious storage of capacity zero. 3.2. Scheduling Method The first step of our algorithm consists in generating an operation-on-node network. Each operation i O corresponds to one node of the network. The nodes are connected by arcs representing minimum and maximum time lags between the start times of the operations. If the scheduling problem is solvable, then there always exists an optimal schedule for which all those temporal relationships are satisfied. Assume that we have arranged the operations belonging to the same task in some arbitrary order. Since the task can only be processed on one unit, the operations have to be executed one after another. Accordingly, we define a minimum time lag which is equal to the task’s processing time between any two consecutive operations in the sequence. We may add further arcs by exploiting the input-output relationships between the tasks. If an intermediate is produced by exactly one task, we can identify minimum time lags which are necessary to the timely availability of the input materials. If an intermediate is consumed by exactly one task, we can add arcs to avoid capacity overflows in a similar way. Those arcs correspond to maximum time lags between producing and consuming operations. Next, we determine the strong components of the network, i.e., the -maximal sets of nodes such that the network contains a directed path from each node to each other node of the set. Since any two nodes of a strong component are mutually linked by temporal relationships, all operations belonging to the same strong component are scheduled consecutively in our method. The basic idea of the scheduling method is very simple. In each iteration we schedule one eligible operation, which is selected based on priority values. The operation is started at the earliest point in time at which the minimum and maximum time lags of the network are satisfied, the operation can be executed on the processing unit, and a sufficient amount of input materials is available. The operations of a strong component are eligible to be scheduled if (i), all of those operations' predecessors in the network out-
Short-Term of Multi-Purpose Batch Processes
161
side the strong component have already been scheduled, (ii), there is enough input material available to process all operations of the strong component, and (iii), there is no other strong component for which some but not all operations have been scheduled. Thus far we have not taken the limited capacity of the storage facilities into account. The storage-capacity constraints are considered via capacity-driven latest start times. If in some iteration of our method we have generated a capacity overflow in a storage facility at a time t , we temporarily force eligible operations consuming the product stocked in this facility to start no later than time t . Those latest start times are maintained until the capacity overflow has been removed. As a consequence it may happen that an eligible operation can no longer be scheduled because the capacity-driven latest start time is smaller than the earliest feasible start time. If no eligible operation can be selected, we perform an unscheduling step in the following way. At first, we determine the operation i that produced the material which cannot be stocked. Next, we select one of the eligible operations, say, operation j . We then increase the earliest completion time of operation i to the earliest feasible start time t of operation j by introducing a release date of t pi for operation i , where pi denotes the processing time of operation i . If operations i and j belong to the same strong component, we remove all operations of this strong component from the schedule and resume the scheduling method. Otherwise, we remove all operations and restart the scheduling procedure from scratch. The unscheduling step may generate unnecessary idle times, which can easily be removed in a postprocessing step. The algorithm can be implemented as a multi-start procedure by randomly disturbing the priority values of the operations. In our implementation the initial unbiased priority values are based on earliest feasible start times, the sizes of the strong components, and the capacity-driven latest start times of the operations.
4. Performance Analysis 4.1. Implementation and Settings We have tested the performance of our decomposition approach on a set of 28 test instances, which have been generated by varying the primary requirements for the four final products of the Maravelias and Grossmann (2004) sample process. We compare our method to the results obtained with the monolithic time-indexed problem formulation of Kondili et al. (1993). The tests have been performed on an AMD personal computer with 2.08 GHz clock pulse and 1 GB RAM. The mixed-integer linear programs of the planning problem and the monolithic model have been solved with CPLEX 10.2, and the multi-pass priority-rule based scheduling method has been implemented in C++. For the latter method, we have imposed a run time limit of 1 second. 4.2. Results Table 1 shows the optimum makespans computed with the monolithic model and the CPU times in seconds, including the time required to prove the optimality of the solution. The last two columns of the table list the makespans and the CPU times obtained with the decomposition approach. Out of the 28 instances, 17 could be solved to optimality, and the maximum relative optimality gap is less than 7 %. The results obtained for the larger instances indicate that our method scales quite well. The maximum CPU time is less than 3 seconds, versus more than two hours for the monolithic approach. In sum, the analysis shows that the decomposition approach is able to provide good feasible schedules at very modest computational expense. Hence, the method is well-suited
162
N. Trautmann et al.
for the planning and scheduling of real-life processes, where due to various types of uncertainties a frequent rescheduling of the operations is often necessary. Instance MG-01 MG-02 MG-03 MG-04 MG-05 MG-06 MG-07 MG-08 MG-09 MG-10 MG-11 MG-12 MG-13 MG-14 MG-15 MG-16 MG-17 MG-18 MG-19 MG-20 MG-21 MG-22 MG-23 MG-24 MG-25 MG-26 MG-27 MG-28
Primary req. (3,3,7,7) (3,7,7,3) (7,7,3,3) (3,7,3,7) (7,3,7,3) (7,3,3,7) (5,5,5,5) (6,6,14,14) (6,14,14,6) (14,14,6,6) (6,14,6,14) (14,6,14,6) (14,6,6,14) (10,10,10,10) (9,9,21,21) (9,21,9,21) (21,21,9,9) (9,21,9,21) (21,9,21,9) (21,9,9,21) (15,15,15,15) (12,12,28,28) (12,28,28,12) (28,28,12,12) (12,28,12,28) (28,12,28,12) (28,12,12,28) (20,20,20,20)
Kondili et al. (1993) Makespan CPU time 17 19 17 17 17 16 16 29 28 29 26 26 22 25 41 37 41 35 35 28 34 53 47 53 44 44 35 41
1.74 2.11 1.35 1.63 1.79 4.04 7.99 6.41 10.29 0.79 3.68 3.22 33.39 9.58 23.93 31.88 13.98 30.44 17.24 385.18 137.33 190.24 329.47 42.80 221.04 25.43 8804.97 156.93
This paper Makespan CPU time 18 20 17 17 17 17 17 29 29 29 26 26 23 26 41 38 41 35 35 29 35 53 47 53 44 44 37 41
1.34 2.16 1.39 1.57 2.06 1.59 1.27 1.59 1.69 1.75 1.59 1.42 1.80 1.57 1.91 1.54 1.56 1.93 1.70 1.40 1.81 1.70 1.85 2.39 1.94 1.63 2.38 1.40
Table 1: Computational results for the 28 problem instances
References Burkard, R.E., Hatzl, J., 2005. Review, extensions and computational comparison of MILP formulations for scheduling of batch processes. Comp. Chem. Eng. 29(8), 1752–1769. Floudas, C.A., Lin, X., 2004. Continuous-time versus discrete-time approaches for scheduling of chemical processes: a review. Comp. Chem. Eng. 28(11), 2109–2129. Kondili, E., Pantelides, C.C., Sargent, R.W.H., 1993. A general algorithm for short-term scheduling of batch operations: I. MILP formulation. Comp. Chem. Eng. 17(2), 211–227. Maravelias, C.T., Grossmann, I.E., 2004. A hybrid MILP/CP decomposition approach for the continuous time scheduling of multipurpose batch plants. Comp. Chem. Eng. 28(10), 1921– 1949. Méndez, C.A., Cerdá, J., Grossmann, I.E., Harjunkoski, I., Fahl, M., 2006. State-of-the-art review of optimization methods for short-term scheduling of batch processes. Comp. Chem. Eng. 30(6-7), 913–946. Neumann, K., Schwindt, C., Trautmann, N., 2002. Advanced production scheduling for batch plants in process industries. OR Spectrum 24(3), 251–279. Trautmann, N., Schwindt, C., 2005. A MINLP/RCPSP decomposition approach for the short-term planning of batch production. In: Puigjaner, L., Espuña, A. (eds.) European Symposium on Computer Aided Process Engineering — 15. Elsevier, Amsterdam, pp. 1309–1314.
18th European Symposium on Computer Aided Process Engineering – ESCAPE18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
163
Combined Nitrogen and Phosphorus Removal. Model-Based Process Optimization Noelia Alasino, Miguel C. Mussati, Nicolás Scenna, Pío Aguirre INGAR Instituto de Desarrollo y Diseño (CONICET-UTN), Avellaneda 3657, (S3002GJC) Santa Fe, Argentina.
Abstract An optimization model based on a superstructure embedding several activated sludge process configurations for nutrient removal is formulated and solved. Simultaneous optimization of the process configuration (process synthesis) and operation conditions for given wastewater specifications and influent flow rate in steady state operation are investigated. The performance criteria selected is the total annual operation cost minimization while predicting compliance with the effluent permitted limits. As the piece of equipment is supposed given, investment costs are not considered. The Activated Sludge Model No. 3 extended with the Bio-P module for computing biological phosphorus removal are used to model the reaction compartments, and the Takács model for representing the secondary settler. The resulting mathematical model is a highly non-linear system, formulated as a Non-Linear-Programming Problem, specifically as a DNLP. The model is implemented and solved using GAMS and CONOPT, respectively. The optimal solution computed from the superstructure model provides cost improvements of around 10% with respect to conventional processes. Keywords: Activated superstructure, DNLP.
sludge
process,
ASM3+BioP,
process
optimization,
1. Introduction In previous works, the COST benchmark wastewater treatment plant model (Copp, 2002) to evaluate control strategies for N removal based on the Activated Sludge Model No. 1 had been used as starting point for optimization of the operation conditions as well as for synthesis of activated sludge WWTPs. Based on the ASM3 model (Gujer et al, 1999), the aim was to minimize the total annual operating cost (Alasino et al, 2006a and 2006b) and the total cost (investments and operating costs) (Alasino et al, 2007). Optimization of P removal facilities is nowadays a key issue. Indeed, biological P removal is often persuade in European treatment plants as an alternative to chemical P removal based on P precipitation with salts such as FeCl3 (Gernaey and Jorgensen, 2004). In Gernaey and Jorgensen (2004) a benchmark WWTP for combined N and P removal is developed for evaluating and comparing WWTP control strategies, and a number of scenario evaluations focusing on the selection of DO set points are described to illustrate the simulation benchmark. Here, optimal operation conditions for a superstructure embedding the most widely used configurations for combined nutrient removal aiming at minimizing operating annual costs will be investigated for given wastewater specifications and flow rate. The plant lay-out used as the departing model is that proposed by Gernaey and Jorgensen (2004), which corresponds to the A2/O process. The other configurations embedded are the UCT process (VIP process), the modified UCT process and the Bardenpho process.
164
N. Alasino et al.
2. Problem Definition The problem addressed is the simultaneous optimization of the process configuration (process synthesis) and the operating conditions (flow rates of aeration, recycles and fresh feed to each reaction compartment and external carbon source dosage) of ASWWTPs for combined biological N and P removal, aiming at minimizing the total annual operating cost. It is assumed: - influent wastewater specifications, - effluent permitted limits, - a process superstructure model, - a cost model computing operation costs, and - process unit sizes.
3. Process Description b) UCT – VIP
a) A2/O process E
D2 ANAE
S
E
RI2 ANAE
RI1
REC PUR
RI
c) Modified UCT process E
RI2 ANAE
ANOX
OX
ANOX
D2
S
OX
ANOX
ANOX
OX RI1
D2
S
REC PUR
RI
REC PUR
d) Modified Bardenpho process
E ANAE
ANOX
OX
ANOX
D2
OX
S
REC PUR
Figure 1. Most widely used ASWWTP configurations for combined nutrient removal
In ASPs, the WW stream is exposed to different environmental conditions (anaerobic, anoxic and aerated zones) to facilitate the different microbiological processes such as the release or uptake of P, nitrification and denitrification. Reduction of carbonaceous matter and nitrification (ammonium is converted to nitrate by autotrophs) are favored by aerobic conditions; while denitrification (nitrate is converted to N gas by heterotrophs) is favored by anoxic ones, if readily biodegradable C is available. Biological P removal relies on P uptake by aerobic heterotrophs (known as phosphate-accumulating organisms PAOs) capable of storing orthophosphate in excess of their biological growth requirements. Under anaerobic conditions, PAOs convert readily available C (e.g., VFAs) to C compounds called polyhydroxyalkanoates PHAs. PAOs use energy generated through the breakdown of polyphosphate molecules to create PHAs. This breakdown results in P release. Under subsequent aerobic or anoxic conditions, PAOs use the stored PHAs as energy to take up the P that was released in the anaerobic zone, as well as any additional phosphate present in the WW. Figure 1 presents the most widely used ASWWTP configurations for combined N and P removal. The A2/O process presents a sequence of anaerobic reactors (to promote the growth of PAOs) followed by a sequence of anoxic to promote denitrification, and finally aerobic reactors. It has one internal and one external recycle stream. The internal recycle stream conducts a fraction of the nitrified liquor from the last aerobic to the 1st anoxic compartment, and the external recycle conducts a fraction of the sludge from the underflow of the sedimentation tank to the 1st compartment. In the UCT process, both recycle streams are feed to the anoxic zone and a second internal recycle stream is present from the anoxic to the anaerobic compartment. The modified UCT process has 2 internal recycles and 1 external one as in the original UCT process but the anoxic zone is divided into 2 zones. The external recycle is directed from the underflow of the decanter to the 1st anoxic zone. The 1st internal recycle stream conducts a fraction of the nitrified liquor from the aerobic to the 2nd anoxic zone. Finally, the second internal recycle stream pumps a fraction of the mixed liquor from the 1st anoxic back to the anaerobic compartment. The Bardenpho process configuration has also an external
Combined Nitrogen and Phosphorus Removal. Model-Based Process Optimization
165
recycle from the sedimentation tank to the anaerobic zone and has an internal recycle from the 1st aerobic zone to the 1st anoxic zone. In general, the addition of external C to the anoxic zone could be detrimental to P removal in a EBPR plant, as the ordinary heterotrophs have competing advantages for nitrate over the denitrifying PAOs, resulting in poor anoxic P uptake. It is recommendable that the external C to be added to the anaerobic zone of an EBPR plant short of COD. The C source is taken up by PAOs to form intracellular C storage compounds, the use of which improves both P and N removal under anoxic conditions.
4. Process Optimization Model The superstructure embeds the four process alternatives described in the preceding section as can be appreciate in Figure 2. As mentioned, the basic plant adopted as starting point for developing the superstructure model is that proposed by Gernaey and Jorgensen (2004), which consists of 7 mixed reaction compartments with a total volume of 6749 m3, and 1 secondary settler of 6000 m3. The 1st and 2nd compartments are anaerobic units; the following 2 are anoxic zones and the last 3 formed the aerated region. This configuration has 1 internal and 1 external recycle stream, and corresponds to the A2/O process. The other process configurations are incorporated into the superstructure by allowing more recycles streams. The superstructure also allowed the distribution of the main process streams. Figure 2. Proposed superstructure Air
uTECSD
Qef
QTfresh M1
kLa1 kLa2 kLa3 kLa4 = 0 d-1 S1 M2 = 0 d-1 S2 M3 = 0 d-1 S3 M4 = 0 d-1 S4 M5 QTr,int,1
QTr,int,2
QTr,int,3
QTr,int,4
kLa5
kLa6
QTr,int,5
kLa7 S6 M7
S5 M6
QTr,int,6
S7
QTr,int,7 QTr,ext
Qwaste
4.1. Reactor model For the aeration tanks, steady state CSTR model is considered. The ASM3 model (Gujer et al, 1999) extended with the Bio-P module (Rieger et al., 2001) is chosen to model the biological processes. The stoichiometric coefficients and kinetic constants are interpolated to 15 oC as proposed by Gujer et al. (1999). The volumes of the reaction compartments are set as follows: 500 m3 for Reactor 1; 750 m3 for Reactors 2, 3 and 4; 1333 m3 for Reactors 5, 6 and 7. The following constraints are considered for the mass transfer coefficient kLai in each compartment i: kLai=0 for Reactors 1, 2, 3 and 4; 0 <= kLai<= 360d-1 for Reactors 5, 6, and 7. kLai,max=360d-1 is the maximum operating limit. 4.2. Secondary settler model The secondary settler is modeled as a non-reactive settling tank subdivided into 10 layers of equal thickness, using the double-exponential settling velocity model (Takács et al.1991). A fixed settler depth of 4 m and a cross area of 1500m2 are adopted. 4.3. Splitter and mixer mass balances. Splitters and mixers models are also needed to represent the proposed superstructure. 4.4. Effluent quality limits These effluent thresholds values were used as specification constraints (Copp, 2002; Gernaey and Jorgensen, 2004): SNH,ef: 4 gN m-3; Ptot ef: 1.5 gP m-3; NTOT,ef: 8 gN m-3; BODef: 10 gCOD m-3; CODef: 100 gCOD m-3; XSS,ef: 30 gSS m-3.
166
N. Alasino et al.
4.5. Maximum values for operation variables The maximum values for the operation variables taken from Copp (2002) are: Qr,ext: 36892m3d-1; Qr,int: 92230m3d-1; Qwaste:1844.6m3d-1; uECSD: 2*103 kgCODd-1; kLai:360 d-1. 4.6. Objective Function The total annual operating cost (OC) is adopted as the objective function to be minimized. The operation cost is computed as follows (Vanrolleghem and Gillot, 2002): OC = OCa + OC pump + OCEQ + OCSLDGD + OCECSD
where OCp is the annual operating cost of unit p. EQ, Ea, Epump, uSLDGD and uECSD are the effluent quality index, aeration energy demand, pumping energy demand, waste sludge production rate and external carbon source dosage rate, respectively, which expressions are given in detail in Alasino et al. (2007) and Gernaey and Jorgensen (2004). The annual unitary operation costs are (Vanrolleghem and Gillot, 2002; Mussati et al., 2002; Gernaey and Jorgensen 2004): ĮEQ: 50 Euro day (kgPU year)-1; ĮE: 25 Euro day kWh year)-1; ĮSLDGD: 75 Euro day (kgSS year)-1; ĮECSD: 109.5 Euro day (kgCOD year)-1. The effluent quality index EQ (kg contaminating unit d-1), which is related to the fines paid due to contaminant discharge, is computed by weighting the compounds loads having influence on the water quality that are usually included in the legislation. 4.7. Influent Wastewater Specifications The influent WW flow rate is set at 18446 m3 d-1. The influent WW composition used consists of the original flow weighted average dry weather influent composition for ASM1 proposed in COST, modified to make it compatible with the ASM3+BioP model. The influent PO4= concentration (SPO) has been taken from Gernaey and Jorgensen (2004). The nonzero input concentrations for compounds are: SI: 30 gCOD m-3; SS: 69.5 gCOD m-3; XI: 51.2 gCOD m-3 ; XS: 202.32 gCOD m-3; XH: 28.17 gCOD m-3; XSS: 215.493 gSS m-3; SNH: 40.60 gN m-3; SALK: 7 gCOD m-3; SPO4: 9.01 gP m-3.
5. Results and Discussion The resulting mathematical model is a highly non-linear system, formulated as a Nonlinear Programming with Discontinuous Derivatives DNLP, with constraints. The model is used for optimization of the operation conditions for the influent wastewater specifications described in the preceding section. A multiple starting point strategy was adopted and, as expected, several locally optimal solutions were found. The solution showing the minimal OC value is presented. Fig. 3 shows the optimal configuration and main optimization variable values for the operating conditions for the proposed superstructure. Table 1 shows the main variables optimal values and costs. Optimization models for the conventional processes (A2/O, UCT, modified UCT and Bardenpho process) have also been implemented. These models were developed simultaneously with the superstructure model development in order to validate the preliminary results obtained. These results are presented in Fig. 4 and Table 1. All optimal solutions predict external C source dosage. Reactors resulted to be anaerobic, anoxic or aerobic compartments depending on the DO (SO) and NOx (SNO) concentrations. Fig. 3 shows C source dosage to the 2nd reactor, influent WW distribution to 1st and 2nd compartment, external recycle distribution to 1st and 4th compartment and an internal recycle from the 7th to the 4th one. It presents a zone (1st reactor) with anoxic conditions (SO=8*10-4gm-3; SNO=0.4gm-3) followed by a zone (2nd and 3rd reactors) with anaerobic conditions (SO<1*10-5gm-3; SNO=6*10-3 and 4*10-4gm3 ), an other zone (4th reactor) with anoxic conditions (SO=1*10-3gm-3; SNO=0.5gm-3), and
167
Combined Nitrogen and Phosphorus Removal. Model-Based Process Optimization
finally an alternate aerated zone (SO=0.9, 3*10-3 and 0.6gm-3; SNO=9.0, 2.9 and 8.7gm-3). The OC decreases around 7% with respect to the plant and operating conditions proposed by Gernaey and Jorgensen (simulation results not shown), and effluent meets the quality conditions while the last one does not. Figure 3. Optimal configuration and main process variable values Superstructure optimization (OC= 762 678) uECSD,2 = 65904 gCODSs d
-1
Qef = 18159 3 -1 md
3 -1
Qr,int,7,4 = 2533 m d Qfresh,1 = 17279 Qfresh,1 = 1167 3 -1 3 -1 md md -1 -1 kLa1=0d kLa2= 0 d -4 -3 -3 SO,1=8 10 gm SO,2=0 gm -3 -3 -3 SNO,1=0.4gm SNO,2=6.10 gm
-1
-1
kLa3=0 d -3 SO,3=0 gm -4 -3 SNO,3=4.10 gm
-1
kLa4= 0 d -3 -3 SO,4=1.10 gm -3 SNO,4=0.5gm
3 -1
-1
kLa5=307d -3 SO,5=0.9gm -3 SNO,5=9.0gm
-1
kLa6=0d -3 -3 SO,6=3.10 gm -3 SNO,6=2.9 gm
kLa7=227 d -3 SO,7=0.6gm -3 SNO,7=8.7gm Qwaste = 287 3 -1 md
3 -1
Qr,ext,1 = 9119 m d
Qr,ext,4 = 12148 m d
Figure 4. Main process variable values for each configuration optimization Qef = 18147 3 -1 md
a. A2/O process configuration optimization (OC = 801 929) Qfresh,1 = 18446 3 -1 md
uECSD,3 = 379552 gCODSs d -1
kLa1= 0 d -3 -3 SO,1=2.10 gm -3 SNO,1=0.7gm
-1
3 -1
Qr,int,7,3 = 0 m d
-1
-1
kLa2= 0 d -5 -3 SO,2=1.10 gm -2 -3 SNO,2=5.10 gm
-1
k L a 3= 0 d -3 SO,3=0 gm -3 -3 SNO,3=3.10 gm
-1
k L a 4= 0 d -3 SO,4=0gm -4 -3 SNO,4=2.10 gm
-1
kLa5= 334 d -3 SO,5=1.0gm -3 SNO,5=9.6gm
kLa6= 0 d -3 -3 SO,6=3.10 gm -3 SNO,6=2.6 gm
-1
kLa7= 217 d -3 SO,7= 0.5gm -3 SNO,7= 8.1gm Qwaste = 299 3 -1 md
3 -1
Qr,ext,1 = 20853 m d
b. VIP process configuration optimization (OC = 779 166) Qef = 18147 3 -1 md
3 -1
Qr,int,4,1 = 13666 m d
3 -1
Qr,int,7,3 = 0 m d
uECSD,3 = 176491 -1 gCODSs d -1
-1
kLa1= 0 d k L a 2= 0 d -3 -3 SO,1=0gm SO,2=0gm Qfresh,1 = -3 -3 -4 -3 SNO,2=2.10 gm 18446 SNO,1=4.10 gm 3 -1 3 -1 md Qr,ext,1 = 24539 m d
-1
kLa3= 0 d -3 -3 SO,3=2.10 gm -3 SNO,3=0.9gm
-1
-1
k L a 4= 0 d -5 -3 SO,4=2.10 gm -3 SNO,4= 0.1gm
-1
kLa5= 316 d -3 SO,5=0.9gm -3 SNO,5=8.6gm
k L a 6= 0 d -3 -3 SO,6=3.10 gm -3 SNO,6=2.6gm
-1
kLa7= 220 d -3 SO,7=0.6g m -3 SNO,7=7.9gm Qwaste = 299 3 -1 md
c. Modified UCT process configuration optimization (OC = 781 981 ) uECSD,3 = 194048 -1 gCODSs d
Qef = 18148 3 -1 md
ANOX -1
-1
kLa1= 0 d kLa2= 0 d -5 -3 -3 SO,2=0gm Qfresh,1 = SO,1=1.10 -2gm -3 -3 -3 SNO,2=2.10 gm 18446 SNO,1=3.10 gm 3 -1 3 -1 md Q r,ext,1 = 23806 m d
3 -1
Qr,int,7,3 = 0 m d -1
kLa3= 0 d -3 -3 SO,3=2.10 gm -3 SNO,3=0.8gm
-1
-1
kLa4= 0 d -5 -3 SO,4=1.10 gm -2 -3 SNO,4=8.10 gm
kLa5= 319 d -3 SO,5=0.9gm -3 SNO,5=8.8gm
-1
k L a 6= 0 d -3 -3 SO,6=3.10 gm -3 SNO,6=2.7gm
-1
kLa7= 218 d -3 SO,7=0.5gm -3 SNO,7=8.0gm Qwaste = 298 3 -1 md Qef = 18147 3 -1 md
d. 5 stages Bardenpho process configuration optimization (OC = 801 928) 3 -1
uECSD,3 = 377720 gCODSs d -1
Qr,int,5,3 = 0 m d
-1
-1 kLa1= 0 d kLa2= 0 d -3 -3 -5 -3 S =2.10 gm SO,2=1.10 gm Qfresh,1 = O,1 -3 -2 -3 SNO,1=0.7gm SNO,2=5.10 gm 18446 3 -1 3 -1 m d Qr,ext,1 = 20792 m d
-1
kLa3= 0 d -3 SO,3=0gm -3 -3 SNO,3=3.10 gm
-1
kLa4= 0 d -3 SO,4=0gm -4 -3 SNO,4=2.10 gm
-1
kLa5= 333d -3 SO,5=1.0gm -3 SNO,5=9.6gm
-1
kLa6= 0 d -3 -3 SO,6=3.10 gm -3 SNO,6=2.7gm
-1
kLa7= 217 d -3 SO,7=0.5gm -3 SNO,7=8.2gm
Qwaste = 299 3 -1 md
In the four configurations of Fig. 4, the internal -i.e. nitrate- recycle from the aerobic zone vanishes. Thus, the anaerobic “character” of the first zone “increases” and so do the P release. Optimal solutions for A2/O and 5-stages Bardenpho process configurations are the same (the differences observed are due to numerical aspects) since the internal recycles vanish: they present a zone (1st and 2nd reactors) with anoxic conditions followed by a zone (3rd and 4th reactors) with anaerobic conditions, and finally an alternate aerated zone. The external C source is added to the anaerobic zone (reactor 3). In VIP and modified UCT configurations the sludge recycle is directed to
168
N. Alasino et al.
the 3rd reactor favoring anaerobic conditions in the 1st zone (reactors 1 and 2). The internal recycles coming from the anoxic zone could not be deleted since they are responsible for the biomass addition to the 1st zone. These recycle streams have a low SNO concentration. As a consequence, in these configurations, the readily biodegradable matter (SS) contained in the effluent and the external C can be use by XPAO (and be more efficiently used for SPO4 release) in the 1st anaerobic zone (reactors 1 and 2), increasing the P-removal efficiency. The models were implemented and solved using GAMS and CONOPT, respectively. Table 1. Costs and main variables optimal values Solution -1
OC (Euro year ) -1
EQef (kg PU d ) -1
Ea,ef (kWh d ) -1
Epump,ef (kWh d ) -1
uSLDGD,ef (kgSS d ) uECSD,ef (kgCODSs d-1) -3
SNH,ef (gN m ) -3
NTOT,ef (gN m )
Superstr.
A2/O
VIP
Mod. UCT
5 st. Bard.
762 678
801 929
779 166
781 981
801 928
7 121.22
6 904.80
6 855.87
6 870.22
6 910.02
6 630.72
6 970.10
6 692.08
6 723.81
6 970.36
963.46
846.11
1 540.15
1 476.92
843.64
2 793.95
2 929.63
2 816.55
2 829.37
2 929.56
65.90
379.55
176.49
194.05
377.72
4.00
4.00
4.00
4.00
4.00
13.96
13.37
13.18
13.23
13.39
-3
2.03
2.09
2.08
2.08
2.09
-3
BODef (gCOD m ) CODef (gCOD m )
46.53
46.58
46.89
46.83
46.57
Ptotef (gP m-3)
1.50
1.50
1.50
1.50
1.50
-3
16.17
16.12
16.52
16.45
16.11
XSS,ef (gSS m )
References N. Alasino, M. C. Mussati, N. Scenna, 2007, Wastewater treatment plant synthesis and design, Ind. Eng. Chem. Res., 46, 23, 7497. N. Alasino, M. C. Mussati, N. Scenna, 2006a, Synthesis of Activated Sludge Wastewater Treatment Plants for N Removal, XXII Interam. Chem. Eng. Congress- V CAIQ, 06C(505). N. Alasino, M. C. Mussati, N. Scenna, 2006 b, Optimization of the operation conditions for denitrifying wastewater treatment plants, EMSS06, 427. J Copp, 2002, The COST Simulation Benchmark: Description and Simulator Manual. Office for Official Publications of the European Community, Luxembourg. K.V. Gernaey and S.B. Jørgensen, 2004, Benchmarking combined biological phosphorus and nitrogen removal wastewater treatment processes. Contr. Eng. Pract., 12, 357. W. Gujer, M. Henze, T. Mino and M. van Loosdrecht, 1999, Activated Sludge Model No. 3, Wat. Sci. Techn., 39, 183. M. Mussati, K. Gernaey, R. Gani and S. Bay Jørgensen, 2002, Performance analysis of a denitrifying wastewater treatment plant. Clean Techn. & Env. Policies, 4, 171. L. Rieger , G. Koch ,M. Kuhni ,W. Gujer and H. Siegrist, 2001, The EAWAG Bio-P module for activated sludge model No. 3. Wat. Res., 35(16), 3887. I. Takács, G. Patry, and D. Nolasco, 1991, A Dynamic Model of the Clarification-Thickening Process. Wat. Res., 25, 1263. P.A. Vanrolleghem and S. Gillot, 2002, Robustness and economic measures as control benchmark performance criteria, Wat. Sci. Techn., 45(4-5), 117. Acknowledgements. The financial support from CONICET and ANPCyT is acknowledged.
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
169
A Systematic Procedure For Optimizing Crude Oil Distillation Systems Hasan Y. Alhammadi Chemical Engineering Department, University of Bahrain Isa Town, PO Box 32038 Kingdom of Bahrain
Abstract Nowadays, building new refinery units is very costly. Therefore, many retrofit projects to the existing crude oil distillation system are considered to increase the production capacity of the refinery by increasing the throughput. The objective of this research is to retrofit the atmospheric crude oil distillation column to reduce the vapor load through the column. Therefore, as the vapor load decreases, the throughput can be increased. Simultaneously, the heat exchanger network, furnace and pumps are considered both to identify any bottleneck associated with the retrofit procedure and to ensure an energy-efficient column design by reusing the available heat effectively. This retrofit design procedure will be explored by applying the suggested modifications on an existing case study by the use of a computer simulation and pinch analysis packages. Keywords: Crude oil distillation systems – Debottlenecking – Pinch analysis.
1. Introduction In any refinery, the atmospheric crude oil distillation column is the first processing unit. The atmospheric crude oil distillation fractionates the crude oil into products according to their boiling points. Therefore, the atmospheric column often forms the bottleneck in a refinery due to the large amount of crude oil introduced to the column to be processed. After that, each unit in the refinery processes a fraction of the feed taken as a single product from the atmospheric column [1]. In this paper, the proposed retrofit design procedure is presented and illustrated by using the case study of an atmospheric crude oil distillation column as shown in Figure 1. The bottlenecks in the existing system will be identified with respect to different points of view such as the vapour load, furnace duty, etc. Detailed information and graphs will not be presented in this paper due to the limitation in the number of pages. 1.1. Pinch Analysis of the Crude Oil Distillation Process Pinch analysis is applied to the crude oil distillation system to determine the minimum utility requirements and to find any applicable modifications to the process. The petroleum refining industry ranks third, after the chemical and the primary metal industry, in its energy consumption [2]. In addition, in any refinery, there is a wide range of temperatures where heat must be supplied or removed. Therefore, applying pinch analysis to the crude oil distillation system is necessary to reduce the energy consumption as far as possible.
170
H.Y. Alhammadi
Figure 1: Base case configuration of the case study Pinch analysis is a thermodynamically based method for the design of heat and power systems. The method of pinch analysis groups the heat sources and sinks of the process streams into temperature intervals, where it is possible to transfer heat in each interval from heat sources to heat sinks [3]. The grand composite curve can be used to provide an interface between the distillation column and the utility system. If a number of different utilities are available, the grand composite curve can be used to determine the relative amount of each utility needed. If there are mismatches between the process streams profiles and the utility profile, then process modifications are needed to remove these mismatches as far as possible. Process modifications may change the heating or cooling requirements of the streams which will be reflected on the grand composite curve. The modifications, which increase the heat recovery, will increase energy savings. Pinch analysis, in particular the grand composite curve, provides valuable information about each modification to the crude oil distillation system with respect to the utility costs. The main objective of using pinch analysis is to maximize the use of the least expensive utilities and minimize the use of the most expensive utilities. 1.2. Decomposition of a Complex Column The atmospheric distillation column in a refinery is highly complex system because of the interactions between the main column with different side strippers and draw streams where the study of this complex system will be more difficult. However, the decomposition of the complex column into a series of simple columns ease and simplify its study. There are a number of advantages of decomposing a complex tower, namely: 1. It is easier to deal with a sequence of simple columns rather than a complex column with respect to understanding the process operations and the implications of design modifications to the process. 2. It is easier to formulate and converge a computer simulation for a sequence of simple columns than a complex column.
A Systematic Procedure for Optimizing Crude Oil Distillation Systems
171
3. To improve the stage distribution for each section in the crude tower, the tower is decomposed into a sequence of simple columns as a first step. After that, the ideal number of stages and the optimum feed stage for each simple column are found. Finally, the simple columns are merged back to the complex column with new numbers of stages for each section. 4. The available standard shortcut methods and distillation design procedures are not applicable to complex columns. However, they are for simple columns. For complex mixtures, e.g. crude oil, the standard shortcut methods are not accurate for designing the crude oil distillation column. However, these methods are used to get a starting estimation for designing the column. In essence, every complex column configuration can be decomposed into single columns and vice versa: every sequence of simple columns can be merged in to a more complex configuration. The decomposition of a complex column into a sequence of simple columns is used only for analysing and studying the system. Therefore, after analysing and modifying the sequence of the simple columns, they must be merged back into a complex column to be compared to the original one.
2. External Modifications The external modifications to retrofit the distillation system are considered as starting steps for the retrofit procedure. Simple modifications requiring little or no capital investment are implemented to improve the match between the heat exchanger networks (HEN) associated with the column and the available utilities. The external modifications do not change the column hardware and its internals [4]. 2.1. Removal of Inefficiencies In this level of retrofit, only simple modifications are implemented to remove any inefficiencies in the system and to improve the heat transfer efficiencies. In the base case study, there are some inefficiencies that are required to be removed as a starting point to increase the separation efficiencies and the energy savings. These inefficiencies are normally found in existing crude oil distillation towers because of their long working life. Through this long life, many modifications and developments are carried out for local improvements without considering the overall performance. During this long life, the crude oil distillation process is adjusted as the feed properties and the products specifications change with time. An inefficiency in the original configuration of the case study is shown where the product of the AGO side stripper is split into two streams one of is cooled and introduced again in the main column. This sub-cooled returned liquid performs the function of a pump around. This separation and remixing is clearly inefficient because of the higher amount of stripping steam required. One way to remove this inefficiency is done where the side draw from the main column is split first and returned as sub-cooled stream while the other stream is stripped in the side stripper. Therefore, the required stripping steam is reduced tremendously as the feed is reduced. The total savings in operating cost are $40,000/yr for this simple modification in the piping connections. Another example of inefficiency is mixing two vapour streams with a big difference in their composition causes this inefficiency. The returned vapour from the KE side stripper is mixed with the vapour inside the main column which resulting in mixing losses. This modification suggests that the vapour must be returned to the stage of the liquid side draw where the vapour composition of this stage is similar to the returned vapour from the side stripper. Due to the reduction in the reboiler duty of the KE side stripper,
172
H.Y. Alhammadi
the absolute saving is another $30,000/yr for changing the location of the vapour return port on the column. Finally, the sequence of these simple columns is merged into a complex column with the new values of pump around and reboiler duties while the main column will not change. The fuel consumption (i.e. the furnace) is reduced by 4.2%. A reduction of 13% in the energy costs is achieved representing savings of $526,000/yr. Low investments are required for these external modifications to adjust the piping network to remove the inefficiencies and to install a new reboiler at the bottom of the LD side stripper. External modifications were considered first. This is because of the low investment that is required by these modifications. The throughput through the modified column could be increased by 39%. There are two options concerning the use of a reboiler or a combination of live steam and a reboiler at the KE side stripper. A trade-off exists between these two options where the use of a reboiler only is more beneficial with respect to the savings in the energy costs while the use of the combination of reboiler and steam save 16% in the furnace duty.
3. Internal Modifications The internal modifications to retrofit the distillation system consider the distillation column and its internals. In this level of retrofit, some changes are made in the internals or nozzles of the main column and the side strippers. Moreover, the reboilers and pump around loops are examined and adjusted as required. Therefore, more complex modifications are required at this level that lead to higher investments. The objective of these modifications is to find out the ideal distribution of stages for each section in the main column [4]. This ideal design is applied to the existing column by modifying its internal to the minimum extent to reduce the costs. 3.1. Redistribution of stages in the Column The main column is decomposed first into a sequence of six simple columns. After that, few iterations are done to find the ratio between the actual reflux to the minimum reflux where the total number of stages in the single columns equals the total in the original. After that, the sequence of the resulting column is merged into a complex column; the original tower has 25 stages in the main column while the ideal tower has 20 stages in the main column. As the total number of stages is the same, the difference in the stages in the main column is distributed among the side strippers. Obviously, it is expensive and impractical to rebuild the tower completely to match the ideal configuration. A compromise between the ideal and original design is required to reduce the modifications costs. Therefore, the original main column is kept unchanged as the ideal number of stages is less than the existed number. The complex column is broken into a sequence of simple columns. This sequence is initially set up with no thermal coupling and with the use of stripping steam instead of reboiling to have the best heat recovery potential. Then, the heat sinks are satisfied first followed by the relaxation of the excess heat sources. Finally, the sequences merged into a complex column. By applying the internal modifications, further reductions in the vapour load and the energy consumption compared to the external modifications are achieved. This is done by redistributing the stages of the column. After identifying the ideal distribution of stages, a compromise between the existing and the ideal columns is required to reduce the costs of these modifications. The throughput to the modified column could be increased by 48%. The maximum vapour load is shifted from the KE section (base case) to the vapour feed stage (after applying the internal modifications). When the vapour
A Systematic Procedure for Optimizing Crude Oil Distillation Systems
173
feed stage becomes the bottleneck, configurational modifications are required to be considered to reduce the vapour load through the main column.
4. Configurational Modifications This level of retrofit design of crude distillation systems is considered last. In this step, complex and costly modifications are investigated. The third level of modifications is the consideration of changes in the column configuration. This can be done by adding a pre-fractionator, a post-fractionator or a preflash train. The main column is changed as little as possible, keeping the same number of trays and position of nozzles to minimise the costs of modifying the main column. Because of the addition of a new column, the separation load, energy consumption and vapour load are reduced in the main column. Some difficulties could arise in this level of modifications due to specific limitations, such as space limits or the length of piping required. 4.1. Preflash Installation A preflash configuration is studied for this case study to reduce vapor load in the main column. The preflash is introduced to separate light products (overhead vapor, Distillate and Heavy Naphtha (HN)) outside the system. In the base case, the feed is heated from 24oC, where the vapor fraction is zero to 335oC to vaporize 76% of the feed. In the preflash configuration, the feed is preheated first from 24oC to 193oC to vaporize 30% of the feed. This preheated feed is flashed in a preflash tank to remove this light material. The vapor product of this preflash tank is processed in a separate column. This vapor product might contain a small amount of heavy materials as will as the liquid product might contain a small amount of light materials. These light materials could be recovered in the main column as overheated vapor. However, the specifications of the light products in the new column might not satisfy as a result of the existence of a high percentage of the heavy materials in the feed stream to the new column. Therefore, the percentage of heavy materials in the vapor product of the preflash should be monitored by adjusting the preheating to reduce the amount of heavy materials in the HN product. The specifications of the new column are estimated first by doing a shortcut simulation. The initial estimation of the pressure for the stages and the product specifications for this column are the same as for the HN section in the original tower. It is found that this column requires four trays and the feed tray is at stage 2. The liquid product of the preflash tank is repressurized and heated further in the furnace before it is flashed and introduced to the main column. 4.2. Rearrangement of Sections and Side Strippers In this step, the ideal number of stages and feed tray for each of the remaining sections are calculated. After removing the top section from the main column, the total number of sections in the main column is reduced from six to five. Therefore, in the initialization step, five columns are required to separate the remaining products. To redistribute the stages in the remaining sections, a shortcut simulation is used to find out the required number of trays, the feed tray location and the minimum reflux ratio for each column in the sequence. To make use of the existing column with the same number of trays (24 trays) iterations are required to adjust the sum of the rectifying sections in each column equal to 24 (number of trays in the main column). Finally, the sequence of the simple columns is merged into a complex column. The main column is not changed, but the side strippers and pump arounds need to be relocated or adjusted. The new configuration suggests increasing the bottom section by two stages which means moving the lowest side draw and pump around two stages up from the existing
174
H.Y. Alhammadi
position. Fortunately, in this case study all other nozzles for the side strippers are not changed. However, the number of stages that is required for the side strippers changes. As the Heavy Naphtha (HN) side stripper is removed and since the AGO stripper requires two stages, rather than one, it is suggested that the AGO side stripper is replaced by the HN side stripper. The side stripper for the LD product will not change but the HD stripper requires one more stage. A new KE stripper with five stages is required. According to the pump arounds, only the top one needs to be moved. The original HN pump around can be moved from stage 5 and used as the AGO pump around at stage 21. A large reduction in the vapor load is shown where the maximum vapor flow, after the column is modified, is 52% of the maximum vapor flow of the base case. This implies that approximately 92% more feed can be processed by the modified column that the original column. The consumption of fuel for the whole system (including the new column) is reduced by 31%. The utility cost for the new configuration including the HN tower is reduced by 18%. This reduction represents an absolute saving of $720,000/yr. Configurational modifications are quite expensive due to the installation of a new column and pumps. However, the benefits from these modifications are much greater than for the simpler modifications discussed in the previous sections. The vapor load is reduced in the modified column by almost half which means the throughput can be almost doubled. In addition, the energy cost of the system is reduced by 18%. The options that are given for the location of the AGO side stripper give a trade-off. Which is the better option should be decided by design engineers for the specific case being investigated.
5. Conclusions The crude oil distillation system is a unit of major importance in every refinery. Any reduction in the vapor load through the distillation column will have an impact on the capacity of the refinery. The objectives of the retrofit studies are usually throughput increases or energy savings and are required to be met with the least capital spending. The proposed procedure divides the retrofit design procedure into three levels. At the first level, suggested external modifications to be applied where the original column does not change in order to remove inefficiencies from the system. Thereafter, reboiler and pump around duties are adjusted. The second level suggests internal modifications to find the best distribution of the stages in the column with the least investment. Therefore, a compromise between the original column and the ideal distribution of stages must be found. The third level of the retrofit modifications involves changing of the column configuration. This could be done by the installation of preflash units, pre-fractionators or post-fractionators units. For the presented case study, it has been shown that the throughput can be increased by 39% by applying the first level of modifications. For the second and third level, the throughput can be increased by 48% and 97% respectively.
References [1] Gary, J. and Handwerk, G., Petroleum Refining-Technology and Economics, Marcel Dekker Inc., New York, 1994. [2] Sittig, M., Petroleum Refining Industry-Energy Saving and Environmental Control, Noyes Data Corporation, New Jersey, 1978. [3] Smith, R., Chemical Process Design, Wiley, 2005. [4] Liebmann, K., Dhole, V. and Jobson, M., Integrated design of a conventional crude oil distillation tower using pinch analysis, Trans IChemE, 76, 1998.
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
175
Evaluation of pervaporation process for recovering a key orange juice flavour compound: modeling and simulation Araujo W.A., Alvarez M.E.T., Moraes E.B., Wolf-Maciel M.R. Separation Processes Development Laboratory, School of Chemical Engineering, State University of Campinas (UNICAMP), P.O. Box 6066, Campinas-SP 13083-970,
[email protected], BRAZIL.
Abstract During fruit juice processing, characteristic flavour components are usually lost as consequence of the heating process. Membrane separation processes are considered as a promising alternative for this issue, e.g., in orange juice industry, an important agro industrial chain in Brazilian economy. Ethyl butyrate (EB) is one of the fresh orange flavour key contributors. Pervaporation is an attractive technology for processing thermal sensitive compounds. This membrane process is based on a selective transport of a liquid feed mixture through a selective polymeric or ceramic membrane. In this work, the pervaporation performance was simulated for recovering EB from a diluted binary aqueous mixture using a PDMS (poly(dimethylsiloxane)) hydrophobic membrane. Innovative preliminary process results obtained using predicted POMS (poly(octylmethylsiloxane)) properties are also presented. A FORTRAN simulator named PERVAP based on an essentially predictive mathematical model was applied in this work. Keywords: prediction, simulation, pervaporation, flavour, ethyl butyrate.
1. Introduction In 2005, Brazil and USA exported 89% of worldwide orange juice. Brazil produces 30% of worldwide orange, and regarding to juice, the number achieves 59% of the market (Neves and Jank, 2006). Esters and aldehydes are the primary contributors to fresh orange juice, although other components could also be important (NisperosCarriedo and Shaw, 1990). Conclusions related to chemical composition and sensory characteristics elaborated on basis on orange juice analyses pointed ethyl butyrate (EB) as the most important compound based on its level and on its sensory threshold (Burgard, 1995). An interesting applied research scenario involves the recovery of this key compound from single strength orange juice (SSOJ) prior to concentration (heating exposal) in evaporators or even from the evaporation effluents (water essence phases or water condensates). It is important to emphasize that EB content in SSOJ is around 0.5 ppm and in condensate streams probably ppb levels can be achieved (Nisperos-Carriedo and Shaw, 1990). Pervaporation have been considered an interesting alternative process for the current industrial options for aroma recovery, distillation, partial condensation, solvent extraction, adsorption, or a combination thereof. It is considered a basic unit operation with significant potential for the solution of various environmental and energetic processes (moderate temperatures). This separation process is based on a selective transport through a dense membrane (polymeric or ceramic) associated with a recovery of the permeate from the vapour phase. A feed liquid mixture contacts one side of a membrane; the permeate is removed as a vapour from the other side. Transport through
W.A. Araujo et al.
176
the membrane is induced by the vapor pressure difference between the feed solution and the permeate vapor (vacuum). The most accepted mechanism transport model is the solution-diffusion model which can be described into three steps, (a) sorption into the membrane at the upstream side, (b) diffusion through the membrane, and (c) desorption into a vapour phase at the downstream side. More recently, pervaporation has been used to the extraction of compounds biotechnologically produced or recovered from perfumery wastes and PDMS (polydimethylsiloxane) was reported as the most used material in the available literature studies on flavour compounds recovery. POMS represents around 10% in this pervaporative application. This intense experimental PDMS studies provides a valuable experimental data library for performance directions compared to different materials and/or outputs of process simulators (Araujo et al., 2007; Baker, 2004; Baudot and Marin, 1997; Pereira et al., 2006; Zhang and Drioli, 1995). The aim of this work was to simulate organophilic pervaporation process (PDMS) for recovering EB from a diluted aqueous binary model solution. A simulator named PERVAP based on a predictive pervaporation modeling was applied (Alvarez et al., 2008). The PDMS preview results were presented in Araujo et al., 2007). Innovative preliminary evaluation of POMS hydrophobic membrane using predicted properties to estimate required parameters in PERVAP, is also one of the objectives of this paper. The model versatility and predictive improvement are challengeable tasks.
2. Material and Methods 2.1. Pervaporation model features and PERVAP software. The PERVAP simulator (tubular module) was developed by Alvarez (2005), using FORTRAN language (Compaq Visual Fortran Professional Edition 6.6.a). The mathematical model applied is based on the solution-diffusion mechanism. Activity coefficients of the components in the feed phase (γi) were determined using the m UNIFAC method (Magnussen et al., 1981). The prediction of diffusion coefficient (Di ) was carried out using the free-volume theory. The free-volume parameters were estimated from viscosity and temperature data of pure components and the binary interaction parameter between the component and the polymer was determined using the group-contribution lattice-fluid equation of state (GCLF-EOS) (Alvarez, 2005, Alvarez et al., 2008). The innovative application of zero shear viscosity predicted data was proposed in this work for POMS free-volume parameters, as an alternative when experimental polymeric membrane viscosity data are scarce or inexistent. 2.1.1. Prediction of diffusion in the membrane selective layer. m
The diffusion coefficient of component i (ethyl butyrate) in the membrane, (Di ), was predicted by the free-volume theory described by the equation (1) (Vrentas and Duda, 1977; 1979): Dim
§ ¨ ω1Vˆ1∗ + ξω2Vˆ2∗ §−E· ¨ = D0 (1 − φ1) (1 − 2χφ1) exp¨ ¸ exp − ¨ K K 11 © RT ¹ ω1 K21 − Tg1 + T + 12 ω2 K22 − Tg 2 + T ¨ γ γ © 2
(
)
(
)
· ¸ ¸ ¸ ¸ ¹
(1)
Evaluation of Pervaporation Process for Recovering a Key Orange Juice Flavour Compound: Modeling and Simulation
177
2.1.2. Estimation of free-volume parameters for solvent and polymeric membranes Six parameters (three for each solvent and three for the polymer) were estimated using the following theories: (a) PDMS: (K22 – Tg2) and K22/γ were obtained in literature (Hong, 1995) using polymer viscosity and temperature data. This procedure is expressed in terms of the Williams-Landel-Ferry equation (Williams et al., 1955). The polymer’s free volume parameter was related to the Williams-Landel-Ferry constants as presented in equation (2). (b) The same approach was used to obtain (K22 – Tg2) and K22/γ for POMS (equation (2)), but zero shear viscosity data prediction was required prior to this step. (c) EB and Water: (K21 – Tg1) and K21/γ parameters were calculated for both components using pure component data of viscosity and temperature (Djojoputro and Ismadji, 2005). Hong (1995) presented equation (3) where free volume amount is related to viscosity. (d) Vˆ1∗ and Vˆ2∗ are critical volumes estimated as the specific volumes of the solvent and polymer at 0K using group contribution methods (Haward, 1970; Hong, 1995). ȗ and φ1 were calculated according to Vrentas and Duda concepts (1977, 1979). More details about all topics mentioned to estimate free-volume parameters are available in literature (Alvarez et al., 2008). § η (T ) ¨ log¨ 2 ¨ η 2 Tg 2 ©
( )
(
· − C WLF T − T 12 g2 ¸ ¸¸ = WLF ¹ C 22 − Tg 2 + T
ln η1 = ln A1 +
(γ Vˆ
∗ 1
K11
)
(2)
)
(3)
(K 21 − Tg1 ) + T
2.1.3. Zero shear viscosity (Ș0) prediction: POMS. The development of new polymeric structures for different technological applications usually requires knowledge about properties of this material. The prediction of properties using additive group contribution method is a valuable procedure adopted during the developments presented here. The group contribution method concept was applied to obtain viscosity data versus temperature, an intermediate step of the freevolume parameters estimation procedure (equation (2) inputs). Detailed concepts about prediction of polymer properties were studied and applied as presented in specific literature (Van Krevelen, 1992; Bicerano, 2002). Equations (4) and (5) are the key equations of the procedure to obtain zero shear viscosity predicted data. The references adopted in this section also allows to predict many others polymer properties. logη o = logη cr + 3.4 log(M w / M cr )
if Mw > Mcr
(4)
logη o = logη cr − log(M cr / M w )
if Mw < Mcr
(5)
2.1.4. Fundamental model equations of pervaporative process PERVAP simulator neglects mass transport in the boundary layer as assumption. Thus, equations (6) and (7) are assumed to calculate permeate fluxes for components i (EB) and j (water) (Alvarez et al., 2008). Ji =
xi ,a α p Dim §¨ x γ − m ¨ i ,a i ,a 1 + (α − 1) xi ,a Aγ i ©
· ¸ ¸ ¹
(6)
W.A. Araujo et al.
178
Jj =
D mj §¨ x j ,a γ Aγ mj ¨©
j ,a
−
(1 − xi,a )pPisat ·¸ Pjsat [1 + (α − 1)xi ,a ] ¸¹
(7)
where, J is the permeate flux (mol/m2h), x is the mole fraction, Psat is the vapor pressure (kPa), p is the relative pressure, γ is the activity coefficient, Dm is the diffusion coefficient (m2/h) and α is the selectivity. 2.2. Inputs applied for simulating pervaporative process The PDMS and POMS membranes and process parameters were investigated using experimental studies for comparison (Sampranpiboon et al., 2000). The following operational conditions were applied for both membranes: temperature, 303.15 K; downstream pressure (permeate side), 0.3997 kPa; membrane thickness, 10 μm.
3. Results and Discussion The predicted and estimated free-volume parameters data used as inputs in PERVAP and diffusion coefficients results are presented in Table 1. The PDMS process performance is illustrated by Figures 1-3. Preview EB flux scenario using POMS is presented in Figure 4. For both membranes water permeate fluxes (Figures 1b and 4b) remained practically constant and did not present adjustments as satisfactory as the profile observed for EB (Figures 1a and 4a). Constant water fluxes are expected as mentioned in several studies, i.e., it is independent on the concentration of organic components for the case of diluted solutions (Pereira et al., 2006). The deviations presented for water (Figures 1b and 4b) were considered tolerable, since this kind of deviation was not observed by Alvarez et al. (2008), but it is important to emphasize that the study was not accomplished assuming a diluted feed stream, consequently, depletion layer impact was avoided considering a turbulent flow system. In diluted streams, this layer is a key issue related to diffusion and, consequently, separation performance. Figures 2a and 2b allow to observe pressure effect on the total permeation. It is possible to see as higher as vacuum better the total permeation, but separation capability is reduced as shown in Figure 2b and confirmed by selectivity profile in Figure 3a. A recovery (%) is presented in Figure 3b, concentration increases of the target compound in feed provides lower recovery results. This is an interesting graph for process set up definitions. Table 1. Inputs for PERVAP and Diffusivity output: PDMS and POMS. Component
Vˆ1∗
K11/γ (cm3/g⋅K)
K21-Tg1 (K)
D0 (cm2/s)
Ȥ
K22-Tg2 (K)
Dm (m2/h)
(cm3/g) PDMS - simulator inputs: Output -35.08 0.0380 EB 0.919 0.5×10-4 1.89×10-9 1.09×10-3 -81.00 -152.29 0.0029 H2O 1.071 8.5×10-4 2.11×10-16 2.18×10-3 POMS – simulator inputs: -35.08 0,0215 EB 0.919 0.5×10-4 2.63×10-8 1.09×10-3 -216.40 -3 -4 -152.29 0,0018 H2O 1.071 8.5×10 2.12×10-16 2.18×10 Note: E= zero (Araujo et al., 2007; Alvarez et al., 2008). K12/γ -PDMS =9.32×10-4 and POMS =3.45×10-3.
Evaluation of Pervaporation Process for Recovering a Key Orange Juice Flavour Compound: Modeling and Simulation
179
16.70
1.20 1.00
Experimental (Sampranpiboon et al., 2000) simulated
0,000110; 16,6000 Experimental
Experimental (Sampranpiboon et al., 2000) simulated
Jj (mol/m .h) - H2O
0.60
§3% variation
16.30
2
2
Ji (mol/m .h) - EB
16.50
0.80
0.40
16.10
0,00011; 16,1054 simulated data
0.20 0.00 0.0000
0.0001
0.0002
0.0003
0.0004
15.90 0.0000
0.0005
0.0001
mole fraction (x i )
0.0002
0.0003
0.0004
0.0005
mole fraction (x i )
1.0
14.0 1.5
18.0 16.0
0.0117
14.0
0.0116
12.0
0.0115
10.0
0.0114
12.0
8.0
2.0
6.0
0.0113
Ji
10.0
4.0
0.0112
Jj
2.0
8.0
0.0111
0
0.0001
0.0002
0.0003
0.0004
0.0005
0.0 0.0
0.0006
2
16.0
20.0
0.0118
2
0.5
0.0119
Ji (mol/m .h)- EB
18.0
(kPa)
0.1
Jj (mol/m .h)-H2O
20.0
Pressure
Total Permeate Flux: Ji+Jj (mol/m2.h)
(a) (b) Figure 1. General simulations of permeation fluxes: (a) H2O (b) EB
0.5
1.0
1.5
2.0
2.5
Permeate Pressure (kPa)
xi
(a) (b) Figure 2. (a) Downstream pressure effect in total permeate flow; (b) Pressure effect in partial permeate fluxes. 0.08
260.0
98.0
238.3 0.06
96.0
yi - Permeate
Selectivity
220.0 200.0 180.0 160.0
94.0 0.04 92.0 90.0
0.02
140.0
Mole Fraction EB - Permeate EB Recovery - Permeate
135.9
120.0
0.00
0.0
0.5
1.0
1.5
Permeate Pressure (kPa)
2.0
2.5
Recovery (%)
240.0
100.0
0
0.0001
0.0002
0.0003
0.0004
88.0 86.0 0.0005
x i - Feed
(a) (b) Figure 3. (a) Selectivity versus permeate pressure (PDMS) xi = 5.0·10-6; (b) EB recovery and permeate composition based on EB content in feed stream.
W.A. Araujo et al.
180 1.200
15.500 Experimental (Sampranpiboon et al., 2000)
0.00005; 15.217
Simulated
15.000
(a)
0.600 0.400
2
0.800
Jj (mol/m .h)- H2O
2
Ji (mol/m .h)- EB
1.000
§11% variation
14.500
(b)
14.000
13.500
0.00005; 13.568
0.200
13.000
0.000 0.0000
12.500 0.0000
Experimental (Sampranpiboon et al. 2000) simulated
0.0001
0.0002
0.0003
mole fraction - x
0.0004 i
0.0005
0.0001
0.0002
0.0003
mole fraction - x
0.0004
0.0005
i
Figure 4. Simulations of permeation: POMS - (a) EB (b) H2O
4. Conclusion Pervaporation is a very interesting process for recovering key compounds from diluted food industry streams (e.g., orange juice, evaporator condensates, etc.). The simulated results confirmed the satisfactory application of PDMS for EB recovery from diluted aqueous feed. The preliminary results using POMS allow to conclude that this membrane should be recommended as the ideal choice for this process. This membrane presented better permeation for EB, giving higher values of selectivity. The process simulations using predicted POMS properties presented promising results which encourages the topic continuity for consolidating this strategy. The simulator performance motivates the investigation of other binary mixtures. A friendly interface should be developed to improve the simulator applications by process engineers. Future PERVAP versions must consider the depletion layer modeling, which is a crucial topic to improve simulator applicability in diluted streams.
5. References Alvarez, M.E.T., 2005, PhD Thesis, State University of Campinas, Campinas, SP, Brazil. Alvarez, M.E.T., Moraes, E.B., Araujo, W.A., Maciel Filho, R., Wolf-Maciel, M.R., 2008. J. Appl. Polym. Sci., 107(4), 2256-2265. Araujo, W.A., Alvarez, M.E.T., Wolf-Maciel, M.R. 2007, In: Proceedings of European Congress of Chemical Engineering (ECCE6), Copenhagen. Baker, R., 2004. Membrane Technology and Applications, John Wiley & Sons Ltd., UK. Baudot, M., Marin, M., 1997. Trans IchemE. 75, 117-147. Bicerano, J., 2002. Prediction of polymer properties, New York: Marcel Dekker Inc. 784. Burgard, D.R., 1995. ACS Symp. Ser. 596, 21-32 Djojoputro, H., Ismadji, S., 2005. J. Chem. Eng. Data. 50, 727-731. Haward, R.N., 1970. J. Macromol. Sci. Rev. Macromol. Chem. C4 (2), 191-242. Hong, S.U., 1995. Ind. Eng. Chem Res. 34, 2536-2544. Magnussen, T., 1981. Ind. Eng. Chem. Process Des. Dev. 20, 331-339. Neves, M.F., Jank, M.S., 2006. São Paulo: PENSA-Agribusiness Intelligence Center, Report. Nisperos-Carriedo, M.O., Shaw, P.E., 1990. J. Agric. Food Chem. 38 (4), 1048-1052. Pereira, C.C., Ribeiro, A.C., Nobrega, R., Borges, C.P., 2006. J. Membr. Sci. 274, 1-23. Sampranpiboon, P., Jiraratananon, R., Feng, X., Huang, R.Y.M., 2000. J. Membr. Sci. 174, 55-65. Van Krevelen, D.W. 1992. Computacional modeling of polymers. New York: Marcel Dekker, 55. Vrentas, J.S., Duda, J.L., 1977. J. Polym. Sci. Part B: Polym. Phys. 15, 403-416. Vrentas, J.S., Duda, J.L., 1979. AICHE J. 25 (1), 1-24. Willians, M.L., Landel, R.F., Ferry, J.D., 1955. J. Am. Chem. Soc. 77, 3701-3707. Zhang, S., Drioli, E., 1995. Sep. Sci. Technol. 30 (1), 1-31.
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
181
A Microeconomics-based approach to product design under uncertainty Craig Whitnack, Ashley Heller, Miguel J. Bagajewicza a
School of Chemical, Biological and Materials Engineering, University of Oklahoma, 100 E. Boyd St., Norman, OK 73019, US
Abstract In this paper, an existing methodology (Bagajewicz, 2007) for the development of consumer products is applied to winemaking. We use a price demand model that incorporates product quality and allows the determination of the most profitable product, which is not always the best product from the consumer’s perspective- a well known fact. The parameters of the model are however, uncertain, especially in the wine case. Thus, design under uncertainty needs to be performed. We present an analysis of profitable scenarios and their associated risk. The method allows vineyards to pick a specific wine quality, a production rate and bottle selling price based on their desired profitability and tolerable level of associated risk. Keywords: Product Design, Wine Production
1. Introduction Wine has long been considered an art form, where quality was held in the eyes of the producer. With the new information-rich consumer market, the consumer now holds the buying power. Because of this, wine producers must now cater more to the desires of their customers to not only obtain patronage, but loyalty as well. In order to accommodate these new demands, we apply a recently developed methodology (Bagajewicz, 2007) to winemaking which incorporates consumer satisfaction to pricing models. Consumer preferences are identified, allowing the data generated by market analysis to be related to wine properties. These wine properties are easily measured throughout the winemaking process and can be manipulated by the manufacturer at little cost. Modifiable processes include fermentation, clarification and stabilization, barrel toasting and aging (Cook et al., 1998). Finally after the consumer overall preferences are identified, the wine can be compared to the competitor and the selling price of the wine can be set by optimizing the producer’s return on investment. We first review briefly some of the consumer preference functions. We then compute a net present value as a function of price for different qualities as suggested by Bagajewicz (2007). Finally, we discuss the uncertainty associated to the model and suggest means to deal with uncertainty.
2. Pricing and Consumer Preference Models We use the same constant elasticity of substitution model as Bagajewicz (2007). This model is a small modification of the constant elasticity of substitution models found in literature (Hirshleifer and Hirshleifer, 1998; Varian, 1992) where hedonic theory is incorporated. This was extended to multiple competitors by Street et al. (2007). The final expression relating demand of new product to price is:
182
C. Whitnack et al. ρ
p §α · d 1 = ¨¨ ¸¸ * 2 p1 β © ¹
§ Y − p1 d 1 · ¸¸ * ¨¨ p2 © ¹
1− ρ
* d1
ρ
(1)
where d1 is the demand of the new product, p1 its proposed price, p2 the average price of competitor wines, ρ a predetermined constant, Į a zero to one measure of the amount of knowledge the consumer has for the product of interest and, Y is the consumer budget, which satisfies (2) Y ≥ p1d1 + p 2 d 2 Finally, ȕ is a positive coefficient that relates how much more appealing the consumer will find the product of interest in comparison to the competing product. It is defined as the ratio of the consumer preference functions β = H 2 / H 1 . In turn, the consumer preference functions are related to product attribute scores (yi; in our case, taste, bitterness, sweetness, etc) as follows: (4) Hi = wi yi
¦
i
Each attribute is weighted based on the rank of importance (wi) to the consumer. Thus, the scores, or values of yi, can be manipulated by altering the production process.
3. Preference Functions Consumer preferences for each attribute (yi) and the weights (wi) can be identified through market research. The consumer preferences are determined using descriptive words for each characteristic (good as, bad as, more than, etc.) by comparing these characteristics to existing products (other wines in this case). These words can then be related to physical, measurable qualities. This level of preference is normalized on a scale ranging from 0 (minimum of 0% preference) to 1 (maximum of 100% preference). Once the utility of the consumer is identified, these characteristics are evaluated by their relation to physical attributes that can be manipulated. The wine attributes used here are: clarity, color, bouquet, acidity, sweetness, bitterness, body/texture, and finish/aftertaste. We now illustrate how this can be done for acidity and bouquet and leave all the rest of the attributes out for space reasons. Acidity can be broken down into different levels based on consumer descriptions. If the acidity is too high, it begins to taste tart or vinegary, whereas if it is too low, the wine can taste flabby and insipid. This presents a need for a balance in acidity, where consumer preference is at an optimum (100% preference). For example, consumers assign 0% preference to wine with tart/vinegary and flabby/insipid attributes, as these acidity levels are undesired. Thus a parabolic curve, with the apex associated with a “balanced” wine, is used to describe consumer preference relating to acidity levels (Figure 1-a). The correlation of tart/vinegary, balanced and flabby/insipid with pH is direct, so the connection is easily found. Typical table wines can range between a pH of 3.0 and 4.0. We consider that there is a linear relationship between consumer-described acidity and pH level (Figure 1-b). Therefore, increasing pH is accompanied by a constant decrease in acidity (Pandell, 1999). Once this correlation is established, the consumer utility can be plotted against the pH in order to find the optimum pH which returns 100% consumer preference for acidity (Figure 1-c). Later, the connection of pH with some wine ingredients or manipulated variables in the fermentation is easy.
A Microeconomics-Based Approach to Product Design Under Uncertainty Linear Relationship for Acidity
Preference Curve for Acidity
1
183
Flabby/ Insipid
0.8
Acidity
y (% Preferenc)
Slightly Low 0.6 0.4
Slightly High
0.2 0
Balanced
Tart/ Vinegary Tart/ Vinegary
Slightly High
Balanced
Acidity
Slightly Low
Flabby/ Insipid
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
pH
(b)
(a) 1 0.9 0.8
y (%Preference)
0.7 0.6
y = -4x2 + 28x - 48
0.5 0.4 0.3 0.2 0.1 0 3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
pH
(c) Figure 1: (a) Consumer preference curve for acidity; (b) linear relationship for acidity descriptions and pH; (c) consumer preference curve as a function of pH. Bouquet was examined in detail to identify specific compounds which contributed to the consumer-identified aromas of the bouquet of wine stored in a toasted oak barrel. Important bouquets include butterscotch/caramel, clove, vanilla, and oak/coconut. Butterscotch/caramel bouquet is due to levels of furfural and 5-methylfurfural, with typical values ranging from 100 to 270 mg/kg of wine. A clove characteristic is due to the presence of small amounts of eugenol ranging between 5 to 25 ȝg/L. Vanilla levels in wine can be attributed to the amount of vanillin present. Typical values of vanillin in toasted wine range from 25 to 55 mg/kg of wine. Oak lactones are responsible for the oak/coconut presence in the bouquet, with typical values between 105-200 ȝg/L (Gutierrez, 2003). In our case, consumer preference reaches a maximum for high levels of vanilla and butterscotch/caramel, whereas for oak/coconut, consumer preference is at a maximum for the lowest levels of oak lactones. Consumer preference for clove, on the other hand, reaches a maximum for a moderate level of eugenol (Gawel, 2007). Just as is the case for the acidity, a parabolic curve is expected to describe the consumer preference in relation to the amount of eugenol (we skip the figures that illustrate then two step procedure and show the final one only). For all the bouquet characteristics, it is assumed that there is a direct, linear relationship between the amount of each compound and the strength of each characteristic. For example, a weak vanilla bouquet would be typical for low values of vanillin. Bouquet can now be obtained by exploring all the different options available for toasting the oak barrels. Toasting can be further categorized by different intensities from light to
184
C. Whitnack et al.
heavy toasts. Medium toasts offer the most potential for flavor, as heavy toasts tend to breakdown important compounds contributing toward the bouquet (Hale et al., 1999).
Figure 2: Consumer preference curve for clove bouquet as a function of eugenol.
4. Results Because of its versatile nature and softness (Waldner et al., 2007), pinot noir is thought to have great marketing potential and is used to demonstrate the proposed methodology. With Į and ȕ functions defined and integrated into the demand model, the selling price was varied at several different production rates to determine the optimum selling price based on the largest net present value calculated. Several variables were held constant, including the competition selling price p2, interest and inflation rate, rate of return, and working capital. The superiority function ȕ was chosen such that the “optimum” bottle of wine was being produced which maximized consumer utility for all wine attributes. Figure 3 displays the resulting range of net present values at each scenario. The graph shows a maximum net present value of approximately $180 million at a production rate of 2.5 million bottles per year and a selling price of $36.
NPW (Millions $)
200 180
3.5M
160 140
1.5M
4M
Production Rates
4.5M
1M
120
750K
5M
100
Optimum Curve 500K
80 60
250K
40 100K
20 0 20
30
40
50
60
70
80
90
100
110
120
130
Bottle Price ($) Figure 3: Net Present Value as a function of selling price at different production rates.
A Microeconomics-Based Approach to Product Design Under Uncertainty
185
Uncertainty was incorporated into the model, essentially allowing variations around a mean for the following main parameters: consumer preference (H2, H1), competitor price, consumer budget, and the interest rate. The resulting risk curve obtained for this optimum scenario (2.5M, $36) is shown in Figures 4 and 5 using dark large red rhombuses; The curve indicates that the probability of losing money with this product is around 16%. To explore other alternatives that could be less risky, 81 random scenarios were chosen that lie between $24 and $40 in Figure 3 and that are not necessarily on the curve of maximums. In other words, because of uncertainty, less risky propositions can come from a combination of price and production that is not on the envelope. Production rates between 1 million and 5 million bottles per year were subjected to each price range. Expected net present values and return on investments were documented and summarized along with opportunity values to display several different profitable decisions. Table 1 and Figure 4 summarize the top 10 best scenarios sorted by decreasing expected net present value and Figure 5 includes some of the most interesting ones, including one of very small risk.
Figure 4: Risk curves for scenarios in table 1. The large font curve (2M, $40) indicates the scenario with the largest ENPW.
Figure 5: Notable curves. The 1M, $34 curve shows very small risk, while the 4M, $30 curve has a large amount of risk.
186
C. Whitnack et al.
Table 1: Scenario summary sorted by decreasing ENPV K (mil) 2.0 2.0 2.5 2.5 2.0 2.5 2.5 1.5 3.0 1.5
p1 $40 $38 $38 $36 $36 $34 $40 $40 $34 $38
NPW ($M) $164.4809 $145.4147 $180.0475 $157.9517 $125.2131 $133.6295 $196.9221 $121.0204 $160.6865 $105.9404
ROI 174.4% 154.2% 153.0% 134.2% 132.8% 113.5% 167.3% 169.8% 114.3% 148.7%
ENPW ($M) $111.4790 $105.5204 $103.5408 $101.7105 $100.3082 $98.8314 $98.4923 $98.2411 $91.9723 $90.3933
EROI 117.0% 114.8% 89.3% 86.8% 104.5% 79.6% 85.0% 140.7% 66.1% 126.7%
=0 13.2% 10.8% 18.5% 16.1% 8.2% 10.4% 23.1% 7.7% 18.8% 5.8%
VAR ($M) $199.8601 $182.1242 $238.8682 $199.2029 $137.1119 $170.6370 $230.9303 $130.4865 $207.9432 $95.7308
OV ($M) $68.0365 $52.1656 $95.3255 $74.9491 $38.1458 $49.9637 $123.5832 $33.3729 $91.0473 $26.3069
The superiority beta (ȕ) function was further manipulated to examine the effects it had on associated risk. It was found that manufacturing a wine of lower consumer utility (higher beta) can, in some cases, reduce the risk at similar aspiration levels. A decrease in risk is always accompanied by a lower opportunity value. This delicate balance between associated risk and opportunity value is an important factor for decision making in economics.
5. Conclusions Each bottle of wine can be engineered to maximize the profit of the producer by use of the demand model. Incorporating uncertainty into the demand model can change the optimal product and allows manipulating financial risk. Altering the quality of the wine, or ȕ, can in some cases, lower the associated risk with that decision.
References M. Bagajewicz. (2007) On the role of Macroeconomics, Multi-scale Planning and Finances in Product Design. AIChE Journal, to appear. G. Cooke, J. Lapsley. Home Winemaking. The Regent of the University of California, Division of Agriculture and Natural Resources: 1998. R. Gawel, 2007, The Effect of Oak Type on Wine Aroma. Wine Education. http://www.aromadictionary.com/articles/oakandwinearoma_article.html. Retrieved February 21. A. Gutierrez. Sensory Descriptive Analysis of Red Wines Undergoing Malolactic Fermentation with Oak Chips. Journal of Food Science. Vol.68, Nr.3, 2003. M. Hale, K. McCafferty, E. Larmie, J. Newton, J. Swan. (1999). The Influence of Oak Seasoning and Toasting Parameters on the Composition and Quality of Wine. American Journal of Enology and Viticulture, Vol 50 No 4, pp 495-502. J. Hirshleifer J. and D. Hirshleifer (1998). Price Theory and Applications. Prentice hall, New Jersey. A. Pandell. The Acidity of Wine. (1999). Retrieved May 4, 2006. http://www.wineperspective.com/the_acidity_of_wine.htm. J. Street, J. Woody, J. Ardila and M. Bagajewicz. (2007) Product Design: A Case Study of Slow Release Carpet Deodorizers/Disinfectants. Industrial and Engineering Chemistry Research. To appear. H. Varian (1992) Microeconomic Analysis. W.W. Norton & Company. M. Waldner, J. Marais. (2006). Impact Aroma Components in South African Wines: A preliminary study. http://wynboer.co.za/recentarticles/1202impact.php3. Winetech. Retrieved February 20, 2007.
18th European Symposium on Computer Aided Process Engineering – ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) © 2008 Elsevier B.V. All rights reserved.
187
Model Predictive Control Based Planning in the Fruit Industry Aníbal Blanco,a Guillermo Masini,b Noemi Petracci,a Alberto Bandonia a
PLAPIQUI (UNS-CONICET), Camino La Carrindanga Km 7, Bahía Blanca (8000), Argentina b Mechanical Engineering Department, Engineering Faculty, Universidad Nacional del Comahue, Buenos Aires 14000, Neuquén (8300), Argentina
Abstract Typical Fruit Industry Supply Chains are highly interconnected networks conformed by farms, packaging plants, cold storage facilities and concentrated juice plants along with clients and third party raw material and services suppliers. The operational planning of such a chain should seek to respond to the before-the-season established product delivery commitments rather than to react in the face of “on-line” customer demand as in classic chains. In this contribution the operational planning of a typical fruit industry supply chain is addressed by means of a Model Predictive Control based scheme which is a model based control strategy that shows attractive features for multivariable, highly interacting, uncertain systems. This methodology naturally allows addressing the meaningful uncertainty in the system parameters and the possibility of supply chain disruption episodes. Keywords: Fruit Industry Supply Chain, Operational Planning, Model Predictive Control
1. Introduction Fruit Industry Supply Chains (FISC) are interconnected networks conformed by production nodes (farms), processing plants (fruit packaging and concentrated juice plants), and storage facilities, along with clients and third party raw material and services suppliers. Although Supply Chain optimization is a mature field, very few contributions on FISC modeling with management purposes have appeared so far in the open literature. In Masini et al. (2007) [1] a tactical multiperiod LP planning model for FISC management was proposed. For given processing and storage capacities and estimations of own fruit production (quantity and quality), the model returns the adequate allocation of packed fruit and concentrated juice along with the required third party raw material, storage and transportation to maximize profit in the following season. In Ortmann (2005) [2] models to optimize the fruit business with emphasis in foreign markets were proposed. The resulting single period LP models were designed to maximize the fruit flow and to minimize the transportation costs while identifying bottlenecks within the network, rather than to provide a planning tool for the system’s managers. The above-described contributions address the “tactical/strategic” levels of the decisionmaking process in centralized FISCs. However, such models are not appropriate as operational decision support tools, which need be able to capture the real dynamic behavior of the system to effectively aid in the operational instance of the FISC. FISCs possess particular operational features as compared with typical chains, that makes
188
A. Blanco et al.
necessary to devise tailored tools for their management. For example, opposite to typical supply chains, which are commonly pull systems (demand driven), FISCs are push systems (seasonal raw material availability driven). Therefore, the major source of uncertainty is the amount and quality of the fruit entering the system each period, rather than the final product demand, since most products are pre-allocated before the season. Therefore, the operational planning of the FISC should seek to satisfy the already established product delivery commitments rather than to respond to “on-line” customer demand. A sound approach for operational optimization of supply chains is to conceptualize them as dynamic systems and to apply “classic” knowledge of control theory to operate them (Perea-Lopez et al., 2001 [3]). Among many approaches, Model Predictive Control (MPC) frameworks have been proposed for supply chain operational management (Bose and Pekny, 2000 [4], Perea Lopez et al., 2003 [5], Mestan et al., 2006 [6]). In the present contribution a MPC scheme is proposed for the operational management of a FISC, which naturally permits to deal with input uncertainty, as well as unexpected events, which can disrupt the system operations. This article is structured as follows. In section 2 a description of a typical FISC along with the required features of the corresponding operational planning model is provided. In section 3 the basics of the proposed MPC scheme are outlined. In section 4 experimental results for typical operative scenarios are discussed. A Conclusions and Future Work Section closes the article.
2. FISC System 2.1. FISC description A typical FISC (Fig. 1) is conformed by Own Farms (OF), Third Party Fruit Suppliers (TPS), Storage Facilities, Packaging Plants (PP), Concentrated Juice Plants (CJP) and clients, among other minor processing nodes. A very detailed description of the FISC infrastructure and business can be found in [1]. X14 RPFC
X1
OF
NPFS
X5
PP
X8
PFS
X10
PPFS
X12
OPFC
X15 X3
X7 X2
TPS
FRS
X6
CJP
X9
CJS
X4
X11
PCJS
X13
OCJC
X16
Fig. 1: FISC scheme
In farms, fruit of different varieties are grown and harvested according to particular harvests periods. Apples and pears are considered in this work. Each day of the harvesting period, OFs produce a certain amount of fruit of each variety. From the company’s point of view, the production of its farms can be processed in its own PPs (X1) and CJPs (X2). The production and quality distribution per variety in each farm
Model Predictive Control Based Planning in the Fruit Industry
189
can be described by average and standard deviation values based of historic industry data. A production cost per variety can be associated to each farm, which comprise growing and labor expenses. In PPs (Blanco et al., 2005 [7]) fresh fruit is received and stored (NPFS) previous washing, classification and packing. Each PP can also receive fresh fruit from TPS (X3). PPs produce waste fruit (damaged or too imperfect non-tradable fruit) devoted to juice production CJPs (X7), and packed fruit (X8), which is cold stored (PFS) previous delivery. PPs possess a maximum processing capacity and a related operating cost, which considers labor, energy and maintenance expenses. In CJPs, juice of the different types of fruit is produced. CJPs possess Fruit Reception Sites (FRS) where waste fruit is stored before processing. FRSs receive waste fruit from OFs (X2), TPSs (X4) and PPs (X7) The produced juice is stored in adequate storage facilities in the same plant (CJS) until delivery. CJPs possess a maximum processing capacity and a certain operating cost. For any FISC there exist two major markets for packed fruit: regional (RPFC) and overseas (OPFC). Concentrated juice only possesses the overseas market (OCJC). Two types of “demands” are considered. A “fixed” demand is conformed by the amounts of packed fruit and juice agreed with the different clients before the fruit season. For such compromises there is a specific time delivery schedule. An “eventual” demand represents the possibility of allocating the excess of goods at a lower price in any period (X15 and X16). Products are delivered by trucks to the regional market and by ship to the overseas market. Products to the overseas market can be stored in port storage facilities (PPFS and PCJS). Each product has a particular selling price in each market. The selling of the different products constitutes the main income of the system. Storage Facilities (NPFS, PFS, FRS, PPFS and PCJS) posses a maximum storage capacity and an associated cost related to the energy required to refrigerate the fruit. There exist significant transportation within the system. Fruit is transported by trucks between the different nodes of the chain. Transportation costs depend on the distances between the facilities and the type of transportation: refrigerated or not. 2.1. FISC model The complete mass balance model for the described network can be found in [1]. Since the model in [1] has “tactical” purposes, an LP approach with a weekly time discretization was adopted in that study. For the “operational” purposes of the present model, much more detail is required for meaningful decision-making. A daily discretization of the timeline is considered in order to take account of short-term uncertainty and potential disruption episodes. A major improvement regarding the model in [1] is the consideration of the “multi-product nature” of PPs and CJPs, meaning that either apples or pears can be processed in a particular period or that the plant is completely shutdown. The flows within the system are discretized since the transportation of goods between the nodes is done by trucks, which can perform a finite integer number of travels per day. Binary variables are introduced to model the integer decisions, leading to a MILP formulation. The overall purpose of an operational planning model is to maximize the net profit of the system in the face of uncertainty in fruit production, third party fruit availability and costs and potential chain disruption events such as unexpected out-of-service of processing plants and storage chambers, reduction in transportation capacity, etc. The total profit is defined as the total income per product sales minus the sum of fruit
190
A. Blanco et al.
production and purchase costs, storage cost, transportation and operation costs and “client dissatisfaction” costs. This last term is a penalization for delivering less amount of product than agreed in the “fixed demand” schedule.
3. Model Predictive Strategy In order to address the above-described operating scenario, an MPC based scheme is adopted. MPC is a model based control strategy that shows attractive features for multivariable, highly interacting, nonlinear, uncertain systems. It was originally devised for chemical process control and later extended to many other areas due to intrinsic advantages regarding more classic control strategies. The MPC control implementation philosophy can be summarized as follows: for a given state and input variables (disturbances) in the present time, compute the profile of the manipulated variables along the considered time horizon in order to optimize the specified objective function while satisfying the system constraints. In order to do so, some estimation of the future values for the disturbances should be assumed. Since there exist a large degree of uncertainty in such estimations, it is not sound to implement the whole control profile. Rather, only the first element is actually implemented, and the whole control action is reevaluated in the next period with updated data. Such a “rolling horizon” control strategy permits to “walk through the timeline” [4] to predict how the system should evolve with the current and estimated future inputs and manipulations in order to achieve the desired objective. In order to implement a MPC strategy to optimize the operations of the FISC, the system has to be conceptualized as a dynamic entity in terms of states, input and outputs [5]. Some inputs will constitute “disturbances” to the model and some others “manipulated variables” for control purposes. A subset of the output variables will be “controlled outputs” whose values will be desired to follow some predefined trajectory or assume particular values in certain periods of the control horizon. For the FISC system, the state variables are the inventories of the different goods in the storage facilities: fresh fruit (NPFS), packed fruit (PFS, PPFS) and concentrated juice (CJS, PCJS). The manipulated variables are the flows of all the streams of the system (Fig. 1). The FISC is considered to be a “centralized” system [6]. For the MPC implementation, the overall profit of the business is maximized in each time period for a certain planning horizon, subject to the mass balance model of system.
4. Results and Discussion To demonstrate the performance of the proposed approach a FISC that comprehends one item of each instance in Fig. 1 is considered. Model data (plant and storage capacities, costs, distances, production averages and deviations, harvesting periods, etc.) can be found in [1]. Although several varieties of pears and apples exist, for the sake of simplicity, in the present model all varieties of each fruit are lumped into “apples” and “pears”. As well, although many different types of packed fruit are produced for the different markets, only “regional” and “overseas” packed fruit is considered in this model. In the MPC strategy, the described model is run in each day of the timeline for the whole planning horizon. Data is updated at every period since most of the parameters of the process are randomly generated from an average and a standard deviation value. A 100 days planning horizon was used. Results are reported for the first 25 runs of the predictive scheme. Within the planning horizon, five different scheduled delivery dates for the fixed demand were imposed, each with different agreed amounts of goods.
Model Predictive Control Based Planning in the Fruit Industry
191
Eventual sales (X15, X16) were allowed in any period of the horizon. A couple of scenarios were studied to illustrate a particular aspect of the system business. Scenario 1 In the first case it was considered that a rather large amount of third party fruit (X3 and X4) is available along the whole planning horizon. In order to maximize benefits, the company purchase fruit from TPS to produce packed fruit and concentrated juice (Fig 2a). Dissatisfied amounts of products (packed fruit and juice) for the fixed demand schedule are produced only in certain products in the scheduled delivery dates (Fig. 2b). Notice that within the first 25 periods reported there are only two scheduled delivery dates in days 15 and 20. In this scenario, large deliveries to the “eventual” market can be observed of both varieties of packed fruit (X15) in several days of the considered period (Fig 2c). Scenario 2 In the second scenario it was considered that TPS fruit availability is dramatically reduced (75%) from periods 30 to 70 of the planning horizon. It can be seen that the profiles of third party raw material purchase (Fig. 3a) and the dissatisfied fixed demand (Fig. 3b) present no meaningful discrepancies regarding the previous case for the first 25 periods. However a significant reduction in packed fruit eventual sales is observed, both in number and amount (Fig. 3c). Notoriously pear is not delivered at all to the eventual market. This is in fact an expected result since the model forsees the lack of fruit in the future and keep the available not selling it in the eventual maket to respond to scheduled deliveries far in the timeline which represent a better income.
5. Conclusions and Future Work In the present contribution a MPC scheme which implements a detailed MILP model was proposed to address the operational planning of a FISC. The approach was devised as a computer aided decision tool for the system manager to account for short-term uncertainty and disruption episodes of the system while including medium/large term forecasts of meaningful parametes such as raw material production, resources availability and costs. The analyzed case study suggests that very different decisions should be adopted regarding the particular foreseable scenario, which is a consequence of the high interconnection between the nodes and the restrictive constraints on the resources (raw material, storage and processing capacity, transportantion, etc.). For the studied instance (only one facility per node in Fig. 1) very large planning periods can be considered since the model is not very computationally expensive. For the case of the 100 days planning period adopted, only a few minutes of CPU time were required. Experiments indicate that even a “whole season” planning period model (365 days) can be solved in reasonable time. However, larger instances of the FISC (several OFs, PPs, CJPs, final products, etc.) will become rapidly intractable for such planning horizons. For such cases a different strategy should be adopted to produce detailed decision making advice for the present and immediate time periods while foreseeing delivery commitments far in the time line. Future work will address such scenario.
192
A. Blanco et al. 736
;.*
;.*
736
3($5
3($5
$33/(
$33/(
3(5,2'
3(5,2'
A
A
B
(9(178$/6$/(6
(9(178$/6$/(6
3($5 $33/(
3($5 $33/(
[NJ
[NJ