A Guide to Practical Toxicology: Evaluation, Prediction, and Risk

117975-Woolley A GUIDE TO PRACTICAL TOXICOLOGY A GUIDE TO PRACTICAL TOXICOLOGY EVALUATION, PREDICTION, AND RISK SE...

Author: Woolley Adam

19 downloads 1134 Views 3MB Size Report

This content was uploaded by our users and we assume good faith they have the permission to share this book. If you own the copyright to this book and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Start by pressing the button below!

Report copyright / DMCA form

DOWNLOAD PDF

117975-Woolley

A GUIDE TO PRACTICAL

TOXICOLOGY

A GUIDE TO PRACTICAL

TOXICOLOGY EVALUATION, PREDICTION, AND RISK SECOND EDITION

ADAM WOOLLEY ForthTox Limited Linlithgow, UK

Informa Healthcare USA, Inc. 52 Vanderbilt Avenue New York, NY 10017 C

2008 Adam Woolley

No claim to original U.S. Government works Printed in the United States of America on acid-free paper 10 9 8 7 6 5 4 3 2 1 International Standard Book Number-10: 1420043145 (Hardcover) International Standard Book Number-13: 9781420043143 (Hardcover) This book contains information obtained from authentic and highly regarded sources. Reprinted material is quoted with permission, and sources are indicated. A wide variety of references are listed. Reasonable efforts have been made to publish reliable data and information, but the author and the publisher cannot assume responsibility for the validity of all materials or for the consequence of their use. No part of this book may be reprinted, reproduced, transmitted, or utilized in any form by any electronic, mechanical, or other means, now known or hereafter invented, including photocopying, microﬁlming, and recording, or in any information storage or retrieval system, without written permission from the publishers. For permission to photocopy or use material electronically from this work, please access www.copyright.com (http://www.copyright.com/) or contact the Copyright Clearance Center, Inc. (CCC) 222 Rosewood Drive, Danvers, MA 01923, 978-750-8400. CCC is a not-for-proﬁt organization that provides licenses and registration for a variety of users. For organizations that have been granted a photocopy license by the CCC, a separate system of payment has been arranged. Trademark Notice: Product or corporate names may be trademarks or registered trademarks, and are used only for identiﬁcation and explanation without intent to infringe. Library of Congress Cataloging-in-Publication Data Woolley, Adam. A guide to practical toxicology : evaluation, prediction, and risk / by Adam Woolley. – 2nd ed. p. ; cm. Includes bibliographical references and index. ISBN-13: 978-1-4200-4314-3 (hardcover : alk. paper) ISBN-10: 1-4200-4314-5 (hardcover : alk. paper) 1. Toxicology. I. Title. [DNLM: 1. Toxicology–methods. 2. Data Interpretation, Statistical. 3. Models, Chemical. 4. Risk Assessment. 5. Risk Factors. 6. Toxicity Tests. QV 602 W913g 2008] RA1195.W66 2008 615.9–dc22

2008016600

For Corporate Sales and Reprint Permissions call 212-520-2700 or write to: Sales Department, 52 Vanderbilt Avenue, 7th ﬂoor, New York, NY 10017. Visit the Informa Web site at www.informa.com and the Informa Healthcare Web site at www.informahealthcare.com

For Sandy, David, Stewart, and Kate, and for my mother, who doggedly read the whole of the ﬁrst edition and wondered about the words, especially parameter.

“All things are poison and nothing without poison; only the dose determines that a thing is not poison.” Philippus Theophrastus Aureolus Bombastus von Hohenheim (Paracelsus, 1493–1541) – alchemist, physician and astrologer. “When we try to pick out anything by itself, we ﬁnd it hitched to everything else (in the universe).” John Muir (1838–1914) – founding conservationist and ecologist.

Preface

The ﬁrst edition of this book arose out of my perception that there is a large amount of toxicology lore that is widely accepted as fact and used in toxicological reports, but is not supported by easily accessible references. I also felt that there was a need for a practical, user-friendly introductory text for those coming to toxicology from related ﬁelds or professions, and who need some insight into how toxicity studies and investigations are carried out. I thought that the book should be informative but readable and should also act as a gateway to the subject, indicating where further information can be found, including the use of websites for literature searches and other areas, such as regulations and guidelines. The book is set out as a guide on how to evaluate toxicity and then how to handle and use the data that are generated. After an introduction to the concepts of toxicology, the book takes the reader through the processes of toxicity testing and interpretation before looking at the concepts of hazard prediction and risk assessment and management. Two ﬁnal chapters look at the evaluation of different chemical classes and at the future of toxicity testing and risk assessment. The audience for this book includes, new graduates starting careers in toxicology, those coming to the subject from different ﬁelds, and specialists in particular areas of toxicology who need some background on the other areas. It is inevitable that as soon as a book hits the shelves (or screens), it will go out-of-date and the pressures of wanting to be up-to-date must be balanced against those to ﬁnish the manuscript on time. Sufﬁce it to say that I was aware that the ﬁrst edition lacked some areas that needed to be addressed, such as safety pharmacology, and would certainly need to be updated if ever a second edition became necessary. Accordingly, this new edition includes two entirely new chapters, one on safety pharmacology and one on the evaluation of different chemical classes. The chapter on alternatives has been completely rewritten and all the others have been reviewed and revised to a greater or lesser extent. The glossary has been expanded slightly and the index has been improved. I acknowledge that there was some bias toward pharmaceuticals in the ﬁrst edition in the treatment of the various subject areas. As I am largely a pharmaceutical toxicologist, this bias is still present to some extent; but I have attempted to write the book such that toxicologists in all areas of chemical evaluation may beneﬁt from it. The basic principles of toxicology are common to all areas, whether you are evaluating pharmaceuticals or industrial chemicals. The main differences are in the regulatory guidelines addressed and in the philosophy required in each area; these differences are addressed in the new chapter on different chemical classes. v

vi

Preface

Throughout the book, words like “may,” “could,” and “however” appear frequently; this is tacit recognition that there are few certainties in life beyond the single gold standard that wherever a statement is made there will be someone to disagree with it. As with any walk of life, if a situation is seen as black and white, it simply means that the intervening shades of grey have not been discovered or are not understood. This is particularly true for any aspect or judgment or interpretation; differing opinions between toxicologists, especially toxicological pathologists, can be extremely frustrating for anyone needing a deﬁnitive answer to a question of safety. Getting a decision wrong in toxicology can be associated with far reaching adverse effects and with consequent litigation or (politically far worse) loss of votes. For this reason, toxicologists (especially those in regulatory agencies) tend to be conservative in their opinions; this is not necessarily a bad thing. However, conservatism is made more likely by poor, incomplete, or poorly understood data or results, which may lead to imposition of inappropriately restrictive exposure limits. As I said in the preface to the ﬁrst edition, the vastness of the subject means that this book cannot hope to be detailed or complete, for reasons of brevity and time. In view of this, the intention is to provide a basis of knowledge—a series of pointers—which can be expanded through use of the bibliography and references given. There are many different ways of achieving an objective in toxicological study and evaluation, and this book cannot pretend to address them all or to be absolutely deﬁnitive in any one area. Toxicologists are known for their differences in opinions and I am (still) just another opinionated toxicologist. Toxicology is a dynamic subject with unique relevance to the public and, as a result, places heavy responsibility on the people who practice it, those who register or accredit toxicologists, and those who regulate or manage it. The future of toxicology is assured; the means of its future investigation is changing and it behoves us to think about what we are doing or what we are asking toxicologists to do (or, more importantly, not to do). As toxicologists, we should do nothing without thought, without considering the impact of our actions on the animals we use, on the public, or a host of other stakeholders. In many ways, if I cause the reader to think more about toxicology and its importance and impact on this world, I will have achieved one of my unwritten objectives. Adam Woolley Linlithgow, July 2008

Acknowledgements

Such a wide ranging text could not be prepared in isolation and I have sought a number of people with more specialist knowledge than me to review individual chapters or sections. Having said that, all the opinions expressed are my own, as is responsibility for any errors that may still lurk in the text. My thanks to those who assisted with the ﬁrst edition still stand, as their contributions are still the basis of much of what appears in this edition. For the new edition, reviews of particular parts were undertaken as follows: Safety Pharmacology—Steve Close; Agrochemical and biocide evaluation—Tom Holmes (Covance); Risk assessment (chapters 13 to 15)—Paul Illing (Paul Illing Consultancy Services); In vitro toxicity and alternatives, and chapter 16—Shirley Price (Surrey University); Medical devices—Jeremy Tinkler (MedPass International); chapters 3, 5, and 7—Warren Harvey (Charles River Laboratories, Edinburgh). For evaluation of biocides, Derek Knight (Safepharm Laboratories) provided guidance and I have gained much from his thorough presentations to conferences on biocides and risk assessment. I would like to thank my long suffering wife, Sandy, for proofreading and formatting the manuscript, and obtaining the necessary permissions. Finally, I would like to thank Barbara Norwitz at Taylor and Francis for giving encouragement in the early stages and then to the team at Informa Healthcare who took over the process of publication. While it is invidious to pick out any particular person, Brian Kearns, Michelle Schmitt–DeBonis and Sherri Niziolek, at Informa Healthcare, have been instrumental in the realisation of this project.

vii

Contents

Preface . . . . v Acknowledgements . . . . vii 1. Introduction to Toxicology: The Necessity of Measurement 1 Introduction 1 The Beginnings of Toxicological Measurement 3 Toxicology and Toxicity Deﬁned 7 It is Natural So It Must be Safe—Everyday Toxicological Conundrums 9 Natural Medicines and Poisons 11 General Objectives of Toxicological Study 14 Nature and Outcome of Toxic Reactions 16 Cellular Basis and Consequences of Toxic Change 18 Expression of Toxicity 22 Target Organ Expression of Toxicity 24 The Necessity for Toxicological Assessment 29 Ethics of Toxicological Assessment 30 The Three Rs: Reduce, Reﬁne, and Replace 32 2. Normality: Deﬁnition and Maintenance 37 Introduction 37 What is Normality? 38 Normality as a Range 41 Experimental Normality 41 Protocol Design and Procedure as Sources of Abnormality 45 Control Groups as Normality 46 Establishing and Maintaining Normality in Experimental Groups 48 Baseline Data and Historical Controls 50 3. Determination of Toxicity: The Basic Principles 59 Circumstances of Toxicity Testing 59 Effects Sought in Toxicity Studies 61 Basic Principles of Toxicological Investigation 61 Toxicokinetic Design 76 Regulatory Framework and Inﬂuences 77 Regulation of Study Conduct—Good Laboratory Practice 80

ix

x

Contents

4. Determination of Toxicity: In Vitro and Alternatives 89 Introduction 89 Rationale for In Vitro Toxicology 90 How and When to Use In Vitro or Alternative Techniques 92 Considerations in Screening Program Design 93 Areas of Use of In Vitro Toxicology 94 Considerations in the Development of In Vitro Tests 95 Validation of In Vitro Methods 96 Test Systems and Endpoints 98 Toxicity in Silico 101 Computer Prediction Systems 104 Target Organ Toxicity 104 Functional Toxicity Testing 107 Pharmacology and Safety Pharmacology In Vitro 107 Metabolism 108 Kinetics 108 Toxicity Testing 109 Carcinogenicity 109 Reproductive Toxicity 109 Irritation and Corrosion 110 Phototoxicity 110 Ecotoxicology 110 Pitfalls in In Vitro Toxicology 111 Future Utility 111 Overview 112 5. Safety Pharmacology 115 Introduction 115 General Principles 116 Tests to be Conducted 117 What to Test? 119 Design 119 Test Systems for Safety Pharmacology 121 Safety Pharmacology in Toxicity Studies 121 Tests and Their Conduct 122 Pitfalls of Safety Pharmacology Studies 128 Overview 129 6. Determination: General and Reproductive Toxicology 131 General Toxicology 131 Test Systems for General Toxicology 131 Study Designs in General Toxicology 134 Examinations for Speciﬁc Toxicities 142 Pitfalls in General Toxicology 145 Reproductive Toxicology 147 Study Designs for Reproductive Toxicology 153 Pitfalls in Reproductive Toxicology 158

Contents

7. Determination: Genotoxicity and Carcinogenicity 161 Genotoxicity 161 Carcinogenicity 176 Pitfalls in Carcinogenicity Studies 187 8. Determination: Dermal Toxicity—Sensitization, Irritation, and Corrosion 199 Introduction 199 General Principles of Dermal Toxicology 200 Factors in Dermal Toxicity 201 Test Systems 203 Study Design and Parameters Measured 204 Sensitization 207 Pitfalls in Irritation and Sensitization 209 9. Determination: Environmental Toxicology and Ecotoxicology 213 Introduction 213 Relevance of Environmental Assessment to Chemical Development 214 General Principles of Environmental Toxicology and Ecotoxicology 215 Pollution, Routes of Entry, and Environmental ADME 216 Factors in Testing for Environmental Effect 219 Test Systems and Study Types for Ecotoxicology 220 Environmental Assessment of Agrochemicals 224 Environmental Assessment of Pharmaceuticals 226 Pitfalls in Environmental Toxicology 227 10. Interpretation: Basic Principles 229 Introduction 229 Steps in Interpretation 231 Use of Background Data in Interpretation 233 Statistics and Signiﬁcance in Toxicology 234 Assessing Exposure 240 The Reality of Difference—The Interpretation of Small Differences 246 The Reproducibility of Difference 248 Overview of Interpretation 249 11. Interpretation: Different Data Types 251 Individual Data Sets 251 Safety Pharmacology 252 General Toxicology 253 Morphological Pathology 258 Reproductive Toxicology 266 Genotoxicity 267 Carcinogenicity 271 Environmental Toxicology and Ecotoxicology 273

xi

xii

Contents

Case Studies 282 The Fundamentals of Interpretation 287 12. Prediction of Hazard 291 Introduction 291 Principles of Prediction 294 Steps in the Prediction Process 296 Factors for Consideration in Prediction 300 Prediction from Minimal Databases 304 Computer Models for Toxicity Prediction 305 Prediction for Individuals 315 Prediction Summary 316 13. Background to Risk Due to Toxicity 319 Introduction 319 Overview of Risk Analysis 319 Levels of Risk and Factors That Affect Risk 323 Summary 335 14. Risk Assessment in Practice and Setting Exposure Limits 337 Introduction 337 Risk Assessment as a Process 338 Data Quality 338 Data Selection for Risk Assessment 339 Single Effect Versus General Risk Assessment 341 Tools and Models in Risk Assessment 342 Target Population, Dose, and Exposure 345 Process and Factors in Risk Assessment 349 Setting Safety Factors and Margins 356 Exposure Limits 358 Dose Level Selection for Starting Risk Assessment 360 Setting Exposure Limits 364 Summary 368 15. Risk Assessment and Management in the Workplace 371 Introduction 371 The Historical and Regulatory Background 372 Classiﬁcation and Exposure Limits 373 Factors in Workplace Risk Assessment 374 Workplace Risk Assessment 374 Workplace Exposure Assessment 375 Risk Management in the Workplace 377 Overview 383

Contents

16. Risk Assessment: Carcinogenicity, The Environment, Evolution, and Overview of Risk Assessment 385 Introduction 385 Notes on Risk Assessment and Carcinogenicity 385 Notes on Risk Assessment and The Environment 395 International Management of Environmental Risks 399 The Evolution of Risk Assessment 399 Overview of Risk Assessment 401 17. Evaluation of Speciﬁc Classes of Chemical 407 Regulatory Inﬂuences 409 The Basic Toxicity Test Package 411 Human Pharmaceuticals 411 Veterinary Pharmaceuticals 415 Medical Devices 416 Agrochemicals/Plant Protection Products 419 Biocides 421 Cosmetics 424 General and Industrial Chemicals—Reach 426 Overview 431 18. The Future of Toxicity Testing and Risk Assessment 435 Introduction 435 Challenges for Toxicology 436 Challenge for Risk Assessment and Management 437 Inﬂuences on Toxicity Testing and Risk Assessment 437 Utility of Animal Experiments in Risk Assessment 439 Development of New Test Methods and Models 440 In Vitro Toxicology and the Future 442 Toxicology in Silico 443 The Future of Safety Evaluation and Risk Assessment 443 Appendix: Useful Websites . . . . 445 Bibliography . . . . 447 Select Glossary . . . . 449 Index . . . . 455

xiii

1 Introduction to Toxicology: The Necessity of Measurement

INTRODUCTION We live in a chemical world. We are composed of chemicals and the vast majority of these chemicals are naturally occurring. However, an increasing number of those found in our bodies are persistent man-made chemicals such as polychlorinated biphenyls, bisphenol A, or organochlorine pesticides such as DDT and its metabolite DDE. It is comforting to believe that all man-made chemicals are poisonous and all natural chemicals are safe. Sadly, this is not the case; for example, botulin toxin, the active principle in Botox injections is one of the most poisonous chemicals known but is found naturally. The ancient Greeks and Romans killed each other with natural poisons such as hemlock. Lead is a natural element but is also one of the most insidious poisons known with no level that can be described as safe. It is not simply these chemicals, however, that should be considered to be poisonous. Recent reports have demonstrated the toxicity of espresso coffee in a teenager who, na¨ıve to coffee, drank seven cups (BBC News, August 2007) and experienced a range of adverse effects that included feeling drenched, burning up, hyperventilating, and laughing and crying. Although these were transient, they can only be described as toxicity. While it is easy to understand that something like coffee can have adverse effects if consumed to excess, extrapolating the same concept to water may appear more difﬁcult. However, it has been realized that drinking water to avoid dehydration during marathons can result in overcompensation and toxicity due to overconsumption of water. The current furore over the presence of lead in the paint for children’s toys was presciently foreseen in the Treatise on Adulterations by Frederick Accum and 1

2

A Guide to Practical Toxicology 2nd Edition

published in 1820. In a concluding paragraph he observed that children are apt to mouth any toys or objects and that the practice of painting toys with poisonous colouring substances should be abolished. This is so obviously self-evident that it is a wonder that action has been taken only recently and, even then, is effective only by postmanufacture testing. Toxicology is a very broad discipline, requiring broad expertise in a number of areas, including chemistry, pharmacology, physiology, biochemistry, anatomy, and numerous others. Deﬁnitions of toxicology tend to emphasize the role of exogenous substances or xenobiotics (literally foreign chemicals), while implicitly ignoring the contribution to toxic effect that can be seen with endogenous substances. The overproduction of endorphins in athletes and resulting “runners’ high” is an example of this; the storage of various proteins in Alzheimer’s disease is another. Absence of a chemical can also have an effect; vitamin deﬁciency or decreased sensitivity to insulin (or its reduced production) may also be seen as effects associated with chemicals. Liebler (1) has written a broad-based review that considers the place of toxicology in the wider context of health and medicine, and also considers the role of endogenous chemicals. He points out that the implicit link between toxicology and exposure to xenobiotics ignores the role of endogenous chemicals and produces an unwarranted separation between toxicology, and health and medical practice (although the role of the occupational toxicologist comes closer to this, than other branches of the science.) Endogenous substances are important in disease but can also be generated in response to xenobiotic exposure. While we can control exogenous exposures to a certain extent, some more than others, there is no easy escape from disease such as cancer, diabetes, and others that can be related to diet, lifestyle, and so forth. Toxicology is a science which has a direct impact on, and responsibility to, the public in a way that other subjects, for instance, astronomy or particle physics, do not. This responsibility arises from the role that toxicology has, in assessing the safety of chemicals that have been or will be, in daily use or to which the public are exposed. If the assessment is wrong, there is a distinct probability that adverse effects will be seen in exposed populations or that the beneﬁts of a new chemical will be denied to people who would be advantaged by its use. The public perception of toxicity is very important to people who conduct or interpret toxicological investigations. A change may be perceived as adverse through incomplete access to all information and this will provoke questions. When is a cluster of disease patients signiﬁcant? How do you investigate? Who should we believe? Why? What is the true, unprejudiced signiﬁcance of this ﬁnding for the exposed population? Major concerns of the public are cancer, loss of “special senses” (especially sight), general debilitation, reproductive effects, disease or shortened lifespan. Much emphasis is placed on exposure to pesticides in food, without concern about the natural chemicals that occur in the same plants (e.g., green potatoes or broccoli), or on exposure to low-level radiation but not on sunbathing and consequent increased risk of skin cancer, including melanoma.

Introduction to Toxicology: The Necessity of Measurement

3

Communication of toxicological information is often one sided, emphasizing the apparently beneﬁcial elements, while ignoring others. For instance, if the incidence of a particular fatal disease is 20 people in 1000, and this could be reduced by a novel (possibly hazardous) treatment by 20%, the new incidence would be 16 in 1000. However, the initial situation is that 98% of women are free of the disease; the new treatment would increase that to 98.4%. An increase of 0.4% is much less attractive than a decrease of 20%. Accidents and emergencies, whether involving human, animal, or plant life, often provide salutary lessons. After the discharge of dioxins at Seveso in 1976, prolonged investigations told us that dioxin is very toxic to animals in various ways; it is clear that humans suffer chloracne but other effects in humans are unproven or unknown. The discharge of inorganic mercury waste at Minimata Bay in Japan taught us that nature does not always make things safer, it can increase hazard, in that case by methylation and increasing lipophilicity of the mercury, such that the human food-chain was affected. It is automatically assumed by many that synthetic chemicals are harmful, but this assumption may ignore signiﬁcant beneﬁts. In the developed world, pharmaceutical standards and purity are assumed and are regulated, not the quality of “designer drugs” or the diluent of street cocaine. The expanding market for herbal extracts and remedies provides real cause for concern; for example, are the sources correctly identiﬁed, processed, stored, and labeled? Treatment of some foods, such as peanuts in store, with mold-preventing chemicals carry some risk from the chemical but markedly reduces risk of liver cancer due to aﬂatoxin, which is produced by the mold Aspergillus ﬂavus growing on damp-stored peanuts. Aﬂatoxin is a particularly potent hepatotoxin and carcinogen, which may induce cancer at levels as low as 1 ppb; it has been found in trace amounts in peanut butter prepared from untreated peanuts. This could be sold as “organic” peanut butter; does this support the campaign for organic production? A note on terminology: The words chemicals and substance are used interchangeably; other words used to suggest the same concept include compound, test item or test substance. While the term substance may include mixtures, the words compound and chemical tend to be more speciﬁc meaning a material composed (chieﬂy) of a single molecule. “Chieﬂy” is needed here because 100% purity is rare, especially with low grade industrial chemicals; in this respect much of toxicology is about mixtures. There is no speciﬁc rule for this usage but the context of the remarks should make it clear whether a single compound or chemical is being described. THE BEGINNINGS OF TOXICOLOGICAL MEASUREMENT Although not always known as toxicology, this fascinating amalgam of different disciplines has had a long history, stemming from the Eberus papyrus of the ancient Egyptians and progressing steadily through ancient Greece and Rome. In

4

A Guide to Practical Toxicology 2nd Edition

Greece and Rome, the knowledge of poisons was crucial in eliminating unwanted politicians, rivals, or relatives; this was particularly noted in some Roman wives who used contract poisoners to do away with rich husbands so that they could inherit the wealth and move on to the next hapless, but temptingly rich victim. This cheerful habit was revived in Renaissance Italy, a society in which dwarves were created by feeding known growth inhibitors to children; in A Midsummer Night’s Dream Shakespeare writes “Get you gone, you dwarf . . . of hindering knotgrass made.” It was clear to the practitioners of the day that the dose was the critical factor determining success or failure. However, it was Paracelsus, born in 1541, who linked dose with effect by stating that everything is a poison; only the dose differentiates between a poison and a remedy. Although this has been quoted extensively, the full context of the quotation is instructive (2). The religious context is clear, as Paracelsus asks what God has created that was not blessed with some gift beneﬁcial to man? Possibly without appreciating its latter day signiﬁcance, he says that to despise a poison is to be ignorant of what it contains, which might be interpreted as indicating ignorance of potential toxicity or therapeutic beneﬁt. Having said that, it has to be admitted that his treatments did not have the precision that he may have wanted, but he was at the forefront of the movement to formulate new medicines. To put dose-relationship in a modern context, a daily glass of red wine may be considered to be therapeutically beneﬁcial (depending on which epidemiological study you wish to believe); increase that to a bottle or more a day and cirrhosis of the liver beckons. Safety as a Concept It is usually fairly easy to say what dose of a chemical is toxic or harmful but much more difﬁcult to predict safety. In fact, it is not possible to prove a negative and the question “Is it safe?” is effectively impossible to answer afﬁrmatively as sensitive individuals may respond to low levels of a chemical when the majority are unaffected. While the concept of “poisonous” was understood, for instance in the seventeenth century, as the effect of poisons or of an excess of something, the concept of safety was of little concern. The work of people like Percival Potts, who linked scrotal cancer in former chimney sweeps with prior exposure to soot, led to gradual recognition of safety as a concept. However, in line with modern practice, it took many years to do anything about it. With the enormous increase in the use of chemicals that has taken place during the late nineteenth century and in the twentieth century, it has become apparent that there should be an increasing emphasis on demonstration of safety. This concern for safety is applied in many areas, including novel or genetically modiﬁed foods. In some cases, where a traditional or long-used chemical is known to be unsafe, efforts are made to ﬁnd a substitute. When the search is successful, it is sometimes the case that the substitute removes the old problems while introducing

Introduction to Toxicology: The Necessity of Measurement

5

new ones. However, it is generally accepted that to predict safety, given that there is no such thing as a “safe” chemical or a risk-free existence, it is necessary ﬁrst to demonstrate what dose of the study chemical is toxic and how that toxicity develops as dose increases. In the modern context there is public recognition that there are chemicals to which people are exposed voluntarily (for example, cigarette smoke, medicines, and alcohol) and those in which exposure is involuntary (pesticides in vegetables, other people’s cigarette smoke, pollution, food preservatives, antibiotics in food animals and so on). There is a lively public debate on many of these substances, which often takes extreme views due to lack of knowledge or willful misinformation or misinterpretation by interested parties. It is a fact that promotion of tobacco was discontinued in the United Kingdom in 1965, so what are the advertisements for? To cause smokers to switch brands? Such ﬁne lines are drawn by politicians, but it is the responsibility of the toxicological community to deﬁne safe doses or inclusion limits for these various chemicals. Above all, this must be done in a credible manner, within the existing framework of regulation and ethical behavior. In addition, there is a growing body of scientiﬁc work investigating the effects of chemicals that occur naturally in our food. For instance, it has been shown in several papers that some constituents of mushrooms can cause cancer in mice when given at high dosages. It should be borne in mind that, in the correct circumstances, administration of water might be capable of inducing cancer, although it is more often a cause of drowning. If a study was conducted that demonstrated that water was a carcinogen, would this mean that we should give up drinking water or convert it to beer? The relationship between dosage and harmful effects is crucial in the assessment of chemicals, including those that occur in a natural diet. Given that much of the exposure of people to individual chemicals is at low levels, the fact that many may cause cancer at high levels is probably not signiﬁcant for everyday life. Furthermore, it is important to remember that the majority of testing is performed on single substances, whereas the majority of exposure is to many substances simultaneously, for example, in a normal diet. Life is about mixtures. Strong Toxicants and Weak Toxicants A reasonably clear ranking of potency among chemicals can be established when appropriate compounds are selected for comparison (Table 1) (3). Thus, tetrachlorodibenzo-p-dioxin (TCDD) is one of the most potent chemicals known, and can be lethal to guinea pigs at 1 ␮g/kg of bodyweight, while the lethal dose of an everyday substance such as paracetamol (acetaminophen) is very much higher. However, this type of ranking is, in some ways, distorting as the potency of any chemical can change markedly depending on the species under consideration, TCDD being 20 to 50 times less toxic in rats (Table 2) (3,18). Organophosphate insecticides are much more toxic, by design, in insects than in mammals. Table 1 also shows the differing toxicities according to species and route of administration.

A Guide to Practical Toxicology 2nd Edition

6

Table 1 Comparative Toxicity—Approximate Lethal Doses (mg/kg) for Chemical Class, Route, and Species Compound (class)

Species

Route of administration Oral

Botulin toxin Ethanol Digitoxin (cardiac glycoside) DDT (OC insecticide) Methoxychlor (OC insecticide) Nicotine Paracetamol (analgesic) Pentobarbital (barbiturate) Phenytoin (anticonvulsant) Malathion (OP insecticide) Parathion (OP insecticide) Soman/VX (OP nerve gas)

Mice Man (est) Mice Cat Guinea pig Rats Rats Rat Rabbit Man (est) Mice Mice Mice Rat Male rat Female rat Man (est) Rat Guinea pig

Parenterala

Dermal

0.000002 (IP) 7000 10,000 0.18 60 113 6,000 50 50 250 340 280 490 1000 4 13

500 (IP) 80 IV; 130 (IM, IP) 92 (IV)

0.007 (IV) 0.012 (SC) 0.008 (SC)

110 ⬎4000

0.142

a Parenteral

routes: IV, intravenous; IM, intramuscular; IP, intraperitoneal; SC, subcutaneous. Abbreviations: OC, Organochlorine; OP, Organophosphorous. Source: Adapted from Ref. 3.

The toxicity of a substance is determined by the following factors: r r r r r r r r r

Dose The individual exposed Species Presence or absence of receptors Frequency of dosing: Single or repeated Duration of exposure or administration Route of exposure Absorption/metabolism Protein binding and disturbance due to competitive binding or deﬁciency of sites r Physical form or formulation b Gas or aerosol b Liquid: Viscous or free ﬂowing; volatile or inert; aqueous or organic b Solution: Concentrated or not b Solid: Dust, inert mass, crystalline, or amorphous r Presence of other chemicals: Synergistic, additive, or inhibitory effects

Introduction to Toxicology: The Necessity of Measurement

7

Table 2 Acute Toxicity of TCDD in Different Species Species

LD50 (␮g/kg)

Guinea pig Male rat Female rat Mouse Rabbit Hamster Monkey

1 22 45 114 115 5000 70

Source: Adapted from Ref. 3, 19.

When a substance is a strong or potent toxin, it is usually readily apparent from its effects on humans or other animals. The majority of debate comes at the lower end of the potency spectrum, particularly with synthetic chemicals such as pesticides, to which people are exposed at homeopathic low levels in everyday life. The bottom line is that we are exposed daily to thousands of chemicals, the majority of which occur naturally in our food and environment and about which very little is known in terms of toxicity. As far as food is concerned, as a result of culture and tradition, foods that are harmful are avoided or are treated specially before consumption. Thus, red kidney beans and cassava root are harmful, if they are not properly prepared before eating due to the presence of toxins in the raw food. Fugu ﬁsh, a delicacy in Japan, requires careful removal of the skin, liver, and ovaries, which contain a potent nerve poison, tetrodotoxin, to which there is no antidote. Equally, there are ancient remedies, such as some herbal teas, which were given to people who were ill; the tendency to use these teas daily can result in unwanted side effects. Thus, a traditional remedy may be safe when used as tradition indicates but becomes harmful, if used incorrectly or in combination. Ginseng and gingko is a newly popular combination that was not used in history and that has not been fully evaluated by modern techniques.

TOXICOLOGY AND TOXICITY DEFINED Toxicology has been deﬁned by the U.S. Society of Toxicology as “the study of the adverse effects of chemical, physical, or biological agents on living organisms and the ecosystem, including the prevention and amelioration of such adverse effects” (www.toxicology.org). In Casarett and Doull’s Toxicology (4): the basic science of poisons, it is deﬁned as the study of the adverse effects of xenobiotics. The Dictionary of Toxicology (2nd edition, Macmillan Reference Ltd, 1998) deﬁnes toxicity as “the ability of a chemical to cause a deleterious effect when the organism is exposed to the chemical.” The Oxford English Dictionary indicates that toxicity is a “toxic or poisonous quality, especially in relation to its degree or strength.” These deﬁnitions contain a number of important concepts, such as

8

A Guide to Practical Toxicology 2nd Edition

deleterious effect, exposure of an organism, and that of degree or strength. They also, as pointed out above, suggest that toxicity is only seen following exposure to externally applied chemicals. In many ways they throw up more questions than they answer. What is a deleterious effect or a toxic or poisonous quality? A simpler deﬁnition might be that it is an adverse change from normality, which may be irreversible; but this requires deﬁnition of adverse change and, crucially, of normality. An adverse change is one that affects the well-being of the organism, either temporarily or permanently, while normality is probably best considered in statistical terms of the normal distribution with a mean plus or minus two standard deviations. Toward the upper and lower limits of such a population, the decision as to whether a value is normal or abnormal may become more complex and open to debate. In the absence of quantitative or semiquantitative data, the decision as to what constitutes normality becomes subjective and dependent on the judgement or prejudices of the decision-maker. In crude terms, it is easy to deﬁne some changes as adverse; for instance, cirrhosis of the liver is an irreversible change, which is often associated with early death. In cases where this is brought on by drinking excessive amounts of alcohol, it is easy to conclude that alcohol is toxic. There has been extensive debate as to whether low doses of alcohol are beneﬁcial, with current opinion leaning towards the duller side of the fence. Some substances, such as vitamin A are clearly essential but are associated with toxicity, including reproductive effects, at high doses; arctic explorers learnt that polar bear liver is toxic due to excessive vitamin A storage. How, then, to separate toxicity from the norm or from effects that are potentially beneﬁcial? This question is valid for all substances to which we are exposed, whether these are natural constituents of our diet or synthetic chemicals such as pharmaceuticals or pesticides. At what point does vitamin A cease to be beneﬁcial and to have an adverse effect? With medicines, the question becomes much more complex because beneﬁcial effects such as treatment to kill a tumour, may be associated with unpleasant side effects that, in a normal person, would be clearly adverse. Nausea and vomiting would be unacceptable as routine side effects of an analgesic for headaches but are accepted in cancer treatment, where the “cost” of side effects is offset by the beneﬁt of a potential cure. Much of the effort that is put into the determination of toxicity has the ultimate motive of assessing or predicting safety in terms of daily exposure levels that can be expected to have no long-term adverse effect. Some toxicity investigations are undertaken to elucidate the mechanism by which a substance is toxic, when effects have been shown in toxicity studies or through epidemiological investigation or clinical experience. The discovery of the mechanism by which paracetamol (acetaminophen) is toxic has greatly contributed to the successful treatment of overdose. For synthetic chemicals, whether they are intended to be pharmaceuticals, pesticides, industrial chemicals, or intermediates used in the synthetic pathways for these substances, there is a clear need to deﬁne toxicity so that any adverse effects can be understood and their effects in humans can be predicted. This

Introduction to Toxicology: The Necessity of Measurement

9

need is relevant as much to the people producing the chemical as to the eventual consumers. The deﬁnition of toxicity is important for natural chemicals as well, although the usual reaction to the toxicity of such substances, for instance, vitamin A, is one of surprise and disbelief. If a small amount is good for you (essential even) then getting a large dose must be particularly beneﬁcial. The necessity for the study of toxicity becomes less clear when the chemical in question is a natural constituent of a normal diet. For example, much effort has been invested in the various chemical constituents of mushrooms. At high doses, it has been shown that it is possible to induce cancer in Swiss mice when they are fed unrealistically high concentrations of the individual chemicals found in mushrooms or of whole or processed mushrooms. Once again it is necessary to invoke Paracelsus and point out that response is dependent on dose. We should question the conclusion of research that implies that we should be careful about or give up eating a vegetable because a constituent can cause cancer at high levels of ingestion in rodents. There is also the paradox that fruit and vegetables are known to be “good” for you, but there is also the realization that they contain many chemicals that may be toxic if enormous doses are taken. This is especially true when they are taken or administered in isolation from their natural source or context. In assessing safety, one of the prime concerns is whether the test chemical is capable of causing or promoting cancer. However, one of the basic problems here is that cancer is expected to develop in between 25% and 40% of the population, depending on source of estimate, and that it is very diverse in form and causation. Its origins are multifactorial and often cannot readily be ascribed individually to a particular cause. Even with an apparently cut and dried association, such as lung cancer and smoking, it is not often possible to say that smoking has caused the cancer because of the inﬂuence of other factors such as alcohol consumption, occupational exposures, and so forth. Thus, if someone regularly consumed 100 g of mushrooms each day, as part of an otherwise balanced diet, it would probably not be possible to ascribe a stomach cancer diagnosed in old age to the ingestion of unusually large amounts of mushrooms. In addition, many cancers have latency periods that may last many years and a tumor such as mesothelioma, due to asbestos, may occur 30 to 40 years after the causative exposure. Many dietary constituents are potentially carcinogenic at high doses but that does not mean that we should give up eating the normal foods in which they occur. Some toxicities that are related to diet are ascribable to chemicals that result from deterioration of the food during storage. For instance, Balkan endemic nephropathy has been linked to ochratoxin, resulting from fungal growth on grain that has been badly stored. Clearly, it is important that we should understand such effects and attempt to reduce the risk as far as possible. IT IS NATURAL SO IT MUST BE SAFE—EVERYDAY TOXICOLOGICAL CONUNDRUMS The website of the American Council on Science and Health (ACSH: www.acsh.org) has published a number of items on the presence (in our normal

10

A Guide to Practical Toxicology 2nd Edition

diet) of various chemicals and carcinogens that are found naturally in an everyday diet. The listing included hydrazines in mushroom soup, allyl isothiocyanate in broccoli spears, aniline and caffeic acid in carrots, psoralens in celery and, ﬁnally, a long (and incomplete) list of chemicals found in coffee. No one is suggesting that consumption of normal quantities of everyday diet is going to be associated with unacceptable toxicity, but the list gives some perspective on the relevance of chemical intake and the fact that many toxins cannot be avoided. Bruce Ames and Lois Swirsky Gold have pointed out that more than 99% of the chemicals that people ingest occur naturally in a normal diet. However, the chemicals listed on the ACSH website, although safe when eaten in a normal diet, are variously mutagenic, carcinogenic in rodents, associated with contact hypersensitivity and phototoxicity, or are simply toxic when given in their pure form at high concentrations to rodents. It is not sensible to assume that natural chemicals are safe, just as it is not sensible to assume that a synthetic chemical is inevitably toxic. If the Delaney clause—a notorious piece of U.S.A. legislation banning synthetic chemicals from foods if they were shown to cause cancer in animals (1958)—were applied to chemicals naturally present in food, our diet would be immediately impoverished and probably unhealthy. For the majority of chemicals, it is possible to plot increasing toxic effect against increasing dose to produce a dose–response curve which is sigmoid in shape. For some chemicals, the response curve is U-shaped. For chemicals that are essential for the well-being of an organism, such as vitamin A, there is an optimum range of dose over which normality is found. Dose lower than this, shows increasing evidence of deﬁciencyand higher, shows the evidence of toxicity that increases with dose. This type of ﬁnding is common to many vitamins or other essential naturally occurring chemicals. Another type of response curve is shown by aspirin, which inhibits platelet aggregation at low dose (reducing the incidence of heart attacks), is active at normal doses for inﬂammation or pain, but becomes toxic at high doses. The difference with aspirin is that it is not essential and absence from a normal diet will not be associated with adverse effect. At what point should ﬁndings in toxicological experiments alert us to hazards arising from routine exposure to individual chemicals? To answer, this requires that the toxicological hazard is actually due to the chemical under study and conﬁrmation that the mechanism of toxicity is relevant to humans. For some rodent carcinogens, this question is easy to answer. Where there is a direct effect on DNA that can lead to cancer, often at low doses as for aﬂatoxin, there is a clear human-relevant hazard. Where the mechanism of carcinogenicity is not related to direct DNA damage but to a non-genotoxic effect, the answer is less clear. Many rodent carcinogens achieve their effects through nongenotoxic mechanisms that are not relevant in humans. D-limonene is carcinogenic in the kidney of male rats through formation of slowly degraded complexes with ␣2u-globulin, a protein found at high concentrations in the urine only of male rats. This protein is normally degraded in lysosomes in the kidney, but when it is complexed with d-limonene, this degradation is slowed, resulting in overload of the lysosomes and

Introduction to Toxicology: The Necessity of Measurement

11

necrosis in the proximal tubule cells and regenerative cell division. The resulting hyperplasia can lead to the formation of cancers. Because ␣2u-globulin is speciﬁc to male rats, this effect is of no relevance to human health. A further example of nongenotoxic carcinogenicity in animals that is not relevant to human health, is peroxisome proliferation and the subsequent induction of liver tumors in rats and mice. Other species have been shown not to respond to these agents in this way, notably in a 7-year study with a peroxisome-proliferating hypolipidemic compound in marmosets (see the ciproﬁbrate case study in chapter 11). This same study indicated that stomach tumors seen in rats were also speciﬁc to that species. The risks of peroxisome proliferation and the relevance of this to humans are looked at in greater detail in the chapters on risk assessment. This should not be taken to imply, however, that nongenotoxic carcinogenicity is irrelevant to humans, as a large number of human cancers, such as colon or breast cancer, are attributable to such mechanisms. However, in general, if a chemical is carcinogenic by a nongenotoxic mechanism in one species of rodent (perhaps in one sex), at doses that are very much higher than those found in routine human exposure, it is probable that this effect is not relevant to humans. It is relatively easy to identify chemicals that damage DNA and are mutagenic by in vitro tests. Detection of human-relevant nongenotoxic effect is more complicated as there are many more endpoints, but this would seem to be the route of the future for investigations of carcinogenic potential. The fear of cancer is very real as it is a widespread condition that very often has unpleasant side effects and is frequently fatal. However, this fear is usually reserved for new untried factors or for occupational exposures that become associated over a period of years with cancer. Furthermore, cancer is not the only hazard of which people should be aware; there are many toxic properties contained in apparently innocuous preparations and foods, which are used routinely and without concern. NATURAL MEDICINES AND POISONS A wide range of herbs has been used in traditional medicines, often in teas and infusions that were taken as indicated by a physician or herbalist. There has been an unfortunate tendency to drink these teas regularly as a tonic and this overfrequent use can result in serious unwanted effects. Herbs often contain pharmacologically active compounds of great potency and, apart from toxicity arising from excessive pharmacological action, can have carcinogenic and teratogenic properties (Box 1). There are many instances of interactions between herbal remedies and prescribed drugs, either through increased or decreased effect. Even simple dietary components can have unexpected effects; grapefruit juice consumption is known to be associated with inhibition of cytochrome P450 (CYP3A4), which is responsible for the metabolism of a wide range of drugs. This has been associated with increased plasma concentrations of cisapride, a drug given for irritable bowel

12

A Guide to Practical Toxicology 2nd Edition

Box 1 Toxicities Associated with Natural Remedies Traditional remedies, often taken as herbal teas, sometimes have highly pharmacologically active constituents and innocent overuse can have signiﬁcant adverse effects. r Ginseng is used in Chinese medicine for impotence, fatigue, ulcers, and stress. It contains active compounds that produce CNS stimulation and increase gastrointestinal motility. Chronic or excessive use can be associated with diarrhoea, nervousness, cardiac effects and nervous system disturbances, and imbalance of ﬂuids and electrolytes. r Comfrey (Symphytum sp.), which has been used as a wound healer, antiirritative, antirheumatic, anti-inﬂammatory, contains pyrrolizidine alkaloids, which are highly hepatotoxic and potentially carcinogenic through damage to DNA. Daily consumption of comfrey over several years in salads or teas can lead to liver toxicity. Teas derived from the roots are particularly hazardous; in addition the preparations may be foetotoxic. r Fresh garlic has wide antimicrobial activity, ﬁbrinolytic activity, reduces blood cholesterol and lipid concentrations, and reduces formation of atherosclerotic plaque. However, taken to excess it can induce nausea, vomiting, diarhoea, and bronchospasm; it is also associated with contact dermatitis attributed to the presence of antibacterial sulphides. Source: Adapted from Ref. 5 syndrome. Inhibition of cisapride metabolism, which probably takes place in the small intestine, can increase the likelihood of life-threatening cardiac arrhythmias in some patients. A similar effect has been reported with carbamazapine, a drug given in epilepsy. Equally, administration of metabolism inhibitors can have useful effects, for instance, in reducing the doses of some drugs needed to achieve therapeutic effect. With the commonplace example of grapefruit juice, it becomes clear that there are unsuspected risk factors in everyday existence; equally, given the multitude of such risks, attempts to account for all of them and lead a risk-free existence are probably doomed to failure. Another unsuspected source of risk is honey. There would normally be no reason to suspect honey as potentially harmful, but when it is produced from rhododendron ﬂowers it is toxic, two teaspoons being enough for adverse effect in some subjects. Many natural substances or mixtures have been associated with abuse and resultant toxicity, prime examples being tobacco, cannabis, and opium. Natural vs. Synthetic Digitalis from the foxglove has been known for hundreds of years and has been commonly used in cases of oedema (dropsy), essentially as a diuretic with cardiac

Introduction to Toxicology: The Necessity of Measurement

13

side effects that gradually came to be appreciated as a primary action of the drug. The foxglove contains a number of pharmacologically potent cardiac glycosides, which have a complex range of actions on the cardiovascular system, seen at low doses. They are used in congestive heart failure and sometimes used to decrease the ventricular rate in atrial ﬁbrillation. The initial mixture of numerous active constituents has been reﬁned to the extent that single compounds are now used, for example, digoxin. However, absorption tends to be variable and this, together with a steep dose–response curve, makes therapy more hazardous than is desirable. With the advent of modern pharmaceutical research, new cardioactive agents were discovered that are safer than digitalis, especially the calcium channel blockers, such as verapamil, diltiazem, or nifedipine. These have dose– response curves that are less steep than digitalis-like drugs and so are easier to use because the toxic dose is appreciably higher than the therapeutic dose. In this instance the synthetic drug is safer to use than the naturally derived agent, having a more targeted action and a much smaller range of adverse side effects. The original problem with digitalis extract, that of administering an imprecisely deﬁned mixture of highly potent alkaloids with wide-ranging effects, has been gradually circumvented by puriﬁcation and ﬁnally by synthesis of carefully targeted molecules. The effects of endogenous chemicals are, in some cases, mimicked by those of xenobiotics. Compounds such as opium and morphine have well-known addictive properties and share some properties with neuropeptides that are present naturally in mammals. Opium is a mixture of alkaloids that includes morphine, of which codeine is a methyl derivative; as with digitalis, use of opium, which was known to the ancient Greeks, gave way to the use of the individual compounds. The complex range of actions of opioids is explained by the presence of several receptor types, for which endogenous peptides have been discovered. These peptides— the endogenous opiates—of which endorphins are one example, are produced in reaction to stress, such as exercise, and there is increasing evidence that, like their natural plant-derived counterparts, they have addictive properties. Exerciseinduced euphoria (runner’s high) is a relatively frequent term in the literature and endorphin release is associated with alterations in pain perception, feelings of well-being, and lowered appetite. It has been suggested that the euphoria leads to altered perception of risk and may be associated with some accidents where joggers are hit by cars. Another possible side effect of excessive exercise is that addiction to the endogenous opioids may be associated with eating disorders, including anorexia (6–8). The natural versus synthetic debate should not be left without consideration of the issue of transgenic materials. Transgenic indicates the transfer of genetic material from one species to another, often from another taxonomic phylum. One example is transgenic maize produced by inclusion of a gene from Bacillus thuringensis that expresses an insecticidal protein, which kills maize borers, a signiﬁcant source of damage to crops. Other insertions delay deterioration of fruit and vegetables or seek to improve ﬂavor. There is concern that the novel

14

A Guide to Practical Toxicology 2nd Edition

foods thus produced may not be “safe” either in terms of human use or in terms of their environmental safety. One of the cited environmental advantages of the modiﬁed maize is the reduced use of pesticides, although this has to be conﬁrmed in practice. Where a novel gene is inserted with the intention of expressing a protein or peptide, this type of inclusion is highly unlikely to be of any danger to consumers of the products due to the normal process of digestion and consequent low absorption of intact peptides from the gastrointestinal tract. Although the individual nucleotides of the inserted genes and the resulting amino acids from their protein products will be absorbed, they will be biochemically equivalent to the natural nucleotides and amino acids and will, as such, be indistinguishable from them. Where insertion is intended to express a small molecule that can be absorbed intact or have local effects in the gastrointestinal tract, there may be greater risks to consumers. Much debate was caused by reports of the effects of genetically modiﬁed potatoes that expressed a lectin from snowdrops as a countermeasure to attack by insects and nematodes. Lectins, which are glycoproteins, include natural chemicals such as abrin, which attacks the gastrointestinal tract and ricin from the castor bean; they are known toxins. The study of the potatoes by dietary administration to rats concluded that there was signiﬁcant hazard for consumers in the genetic modiﬁcation and extended this conclusion to other genetically altered foods. However, the study was of short duration, used small numbers of animals and unrealistically high inclusion levels of the potatoes, which was probably a confounding factor in this study. In short, it was considered that the experiment was poorly designed, executed, and interpreted and not a suitable basis for drawing conclusions. At most, it was adequate as a basis for the design of more deﬁnitive studies [see case study in chapter 11 (9–12)] It is clear from this that toxicological research in this area has to be conducted to very high standards. The risks of getting it wrong—either in overstating the risk with attendant effects on future food production levels, or in understating risk which might result in unacceptable toxicity in consumers—are clearly high. Either way, the toxicologists concerned, will be at the forefront of the debate, and their independence and scientiﬁc standing must be unimpeachable. Environmental risks are another matter and genetic transfer between herbicide-resistant crops and weeds has been shown requiring the use of more toxic chemicals, which the original insertions were supposed to make redundant. This is the type of situation where indirect toxicity could result. If pesticide use increases, there could well be environmental detriments that affect the public indirectly, for instance, through increased concentrations in drinking water or through less easily measured changes in the ecosystem. GENERAL OBJECTIVES OF TOXICOLOGICAL STUDY Toxicology is a wide-ranging subject with many applications and, as a result, there are many reasons for starting a toxicological investigation. Among these are:

Introduction to Toxicology: The Necessity of Measurement

15

r To establish a dose–response curve—the quantitative relationship between dose and response. It is important to deﬁne the steepness of the response; for some drugs such as phenytoin, digitalis, or warfarin, a small increase in dose can produce very large increases in adverse side effects that can be life threatening. The safety margin for these compounds is very small; for other classes of drug it can be much greater and a doubling of dose will have little extra effect. r To assure safety of new chemicals for use as pesticides, drugs, or food additives before they are registered for general use in industry or doctors’ clinics. This type of toxicity study is regulated by government and international guidelines that describe minimum study designs and the types of study that must be conducted and the test systems that may be used. Toxicologists in regulatory authorities tend to be conservative in their approach, as they have a responsibility to the public to ensure as far as possible that the safety of new chemicals or the relevance of new methods is thoroughly investigated before signiﬁcant human exposure is allowed. r To establish the mode of action or mechanism for a toxic effect that may have been seen in other studies. r To produce epidemiological studies to explain observations in the population, for instance, the long investigation into the association of smoking with lung cancer and other diseases. This type of study may also be used to seek explanations for toxicities seen in patients or workers in particular industries. r To investigate or validate new methods of testing or investigation, particularly those conducted in vitro rather than in animals. The last point is particularly important, as the extensive use of animals in toxicological experiments is increasingly questioned. There is a considerable dilemma here; animals offer a whole multiorgan system, in which to conduct experiments and the interrelationships of the various organs can be investigated in a way that cannot be investigated (at present) in a single cell or tissue system in a static vessel. A patient who takes a diuretic orally, does not give it directly to the kidney, where it is expected to have its effect. In order to get to the site of action in the kidney, the drug has to pass through the gastrointestinal tract and then the liver and the bloodstream. In the blood, on the way to the kidney, the drug passes through every other organ in the body where there are opportunities for unwanted effects; for instance, certain classes of antibiotic (e.g., gentamycin) and diuretic (e.g., furosemide) have been associated with effects on the hair cells in the inner ear leading to hearing impairment. Any program of work that seeks to investigate the effects of a novel compound intended for extensive, regulated use in man must, at some point, include experiments in animals that will examine these interrelationships. The down side is that, animal research is expensive and may not give a wholly reliable result when related to humans. The best test system for humans is, undoubtedly, other humans but even this is complicated by differences between ethnic groups and individuals and by ethical questions as to whether human

16

A Guide to Practical Toxicology 2nd Edition

volunteers should be asked to take potentially toxic pesticides and/or new drugs for which the toxicity is completely unknown. Knowledge of the differences in human populations also indicates that one group of humans may not be a good model for another, because of genetic diversity. For instance, Eskimos tend to be able to metabolize the anti-tuberculosis drug isoniazid, faster than Egyptians and would therefore give erroneous results were they to be used as a test system to investigate safety of use in Egyptians. Finally there is no doubt that giving even small doses of an unknown chemical to humans may not be ethically acceptable. For these reasons, experiments that attempt to ﬁnd new methods of investigation and to validate them for use in safety evaluation comprise one of the more important avenues of toxicological exploration. NATURE AND OUTCOME OF TOXIC REACTIONS Chemicals interact with animal cells in numerous ways; these can be broadly categorized as having effects at the level of the cell organelle, the cell, the tissue, or organ (or part of an organ) or the whole organism. Interactions at the cellular level are often associated with a precise molecular target, such as a pharmacologically important receptor, an enzyme or other molecular component. Such interactions may result simply in changes in the biochemistry of the cell, the effects of which may or may not be visible under the microscope, or in effects so severe that they result in cell death. Cell organelles, such as the endoplasmic reticulum, which carries many enzymes responsible for metabolism of xenobiotic chemicals, can be disrupted by lipid peroxidation brought about by free radicals generated by metabolism of the chemical. This autodestructive process can be so extensive that the whole cell is affected and dies through necrosis. Equally, the endoplasmic reticulum may become more extensive as a result of increased amounts of enzymes produced to metabolize a particular chemical. This process of enzyme induction is classically associated with hepatocytic hypertrophy around the central vein in the liver, which produces a characteristic appearance in histological sections and is often associated with an increase in liver size. In many cases this is considered to be evidence of adaptive change rather than toxicity as it is usually readily reversible. When many cells in a tissue are affected, the whole organ may be changed in functional terms or have a different appearance under the microscope when compared with controls or expectation. The kidney is a good example of an organ, in which particular parts may be affected while leaving the rest of the tissue apparently untouched. Damage to the glomerulus or the proximal convoluted tubule may not be reﬂected by visible change in other parts of the organ. However, the function of the kidney as a whole may be affected by inﬂuences such as blood pressure or hormonal diuresis, which may result in unwanted side effects in the rest of the organism. All toxic reactions have a biochemical basis, which may be more or less precise. Cyanide speciﬁcally inhibits cytochrome oxidase in the mitochondria,

Introduction to Toxicology: The Necessity of Measurement

17

preventing oxidative phosphorylation through inhibition of mitochondrial electron transport. Fluorocitrate, a metabolite of the rodenticide ﬂuoroacetate, is bound by aconitase, an enzyme in the tricarboxylic acid cycle. Thus, the central cycle of carbohydrate metabolism is inhibited by blocking the conversion of citrate to isocitrate, leading to the death of the recipient. The toxicity of many chemicals is due to their metabolites rather than to the parent molecule. Inhibition of this metabolism may mitigate or remove the toxic effects. This toxicity-inducing metabolism may be a normal fate for the molecule; ﬂuoroacetate is always metabolized to ﬂuorocitrate. Paracetamol, however, is normally eliminated from the body by conjugation with sulphate or glucuronide, while a small proportion (approximately 4%) is metabolized via cytochrome P450 to a metabolite (N-acetyl-p-benzoquinone imine) that is normally conjugated with glutathione (GSH). Although GSH is present in the liver at high concentrations relative to other peptides, in paracetamol overdose it becomes depleted, so freeing the toxic metabolite to bind covalently to liver proteins, leading to liver necrosis. Paracetamol overdose is often fatal, but in survivors the effects may be transient; liver biopsies taken a few months after overdose may reveal no evidence of previous damage due to the liver’s enormous powers of self-repair. The toxic reactions discussed above are examples of effects that are immediately obvious and which usually follow a high, or relatively high dose. Other toxic reactions may be expressed slowly, through gradual reduction of functional reserve. The kidney of a young adult has excess of functional capacity, which declines with age. If high doses of nonsteroidal, anti-inﬂammatory drugs are taken, through prescription or abuse, this normal age-related decline can be accelerated to a point where renal failure occurs. The same situation can exist in the nervous system, where normal age-related decline may be accelerated by constant exposure to doses of chemical that are not individually toxic but have a disastrous additive effect. This has been seen following daily work-related exposure over long periods to n-hexane or methyl n-butyl ketone. The long-term result is a neuropathy and muscular weakness, which begins in the extremities and progresses toward the centre with continued exposure. Another type of reaction to toxins is one characterized by a biochemical and then a morphological response to a chemically induced imbalance in the organism, often hormonal. Drugs such as some hypolipidemic ﬁbrates, which inhibit secretion of gastric acid in rats, have been associated with carcinoid tumors of the rodent stomach. This is due to an increase in the plasma concentration of gastrin, which stimulates the neuroendocrine cells, resulting in their hyperplasia. This hyperplastic response is translated, in a proportion of the animals, to malignant tumours. Similarly, hormonal imbalance can result in an increased incidence of breast cancer or prostate cancer. In this respect, the recent increase in testicular cancer among younger men is of interest; studies have been set up to see if there is a relationship with low levels of environmental pollutants. Through effects in the reproductive tract or on the reproductive cycle, which may not be apparent at the time of exposure to the responsible chemical, toxicity

18

A Guide to Practical Toxicology 2nd Edition

can also be expressed in succeeding generations. Thalidomide is the classic example of this and is interesting from several standpoints. A sedative given to pregnant women to reduce nausea in early pregnancy, thalidomide was associated with a range of defects in the offspring, the most apparent being shortening of the long bones of the limbs (phocomelia). The defects were closely dependent on the day the drug was taken, usually in the fourth or ﬁfth week of pregnancy. Furthermore, it is a chiral molecule and the S(−) form is more embryotoxic than the R(+) form. Thalidomide illustrates the precision of effects on the developing foetus, and the importance of time of exposure relative to the stage of embryonic development. A further example of unsuspected reproductive effect is diethyl stilboestrol, which was given to pregnant women as an antiabortion agent but was associated with the appearance of clear cell adenocarcinomas in the vagina and testicular defects in their offspring. These effects did not become evident until puberty. Toxic reactions, severe or trivial, may be reversible or irreversible according to which tissue is affected. As indicated above for paracetamol, the liver has a large capacity for repair of extensive lesions; other tissues associated with easy repair are those that can divide and replicate themselves quickly, such as the skin and gastrointestinal tract. The kidney falls into both the reparative and the next, nonreparative category. The epithelium of the proximal tubule is a common target for toxic attack, but as long as the basement membrane on which these cells rest is not breached, repair can be very rapid, if exposure is stopped. Other parts of the kidney, notably the glomerulus and the pelvis, do not repair so readily in parts due to differences in embryonic origin. As suggested by the example of the kidney, tissues which do not divide readily, do not repair easily or in some cases, at all. Of these, the usual example is the central nervous system, another tissue with a large functional reserve that can be overwhelmed by insidious toxic actions over a period of years. CELLULAR BASIS AND CONSEQUENCES OF TOXIC CHANGE With the exception of a few substances that are corrosive, direct effects of toxic substances are expressed in individual cells. According to the extent of exposure (dose), the number of cells affected increases to the point where the whole organ or tissue is changed, biochemically or morphologically. There are relatively few substances that have direct effects in cells without ﬁrst being metabolized. Those that are active without prior metabolism are often intrinsically reactive or have activity at speciﬁc receptors on the cell membrane or in the cell itself. Corrosive substances tend to act from outside the cell and have widespread effects that result in the deaths of many cells but in a different manner to toxicants that work from the cell membrane or inside. In other words, in corrosion, there is no initial molecular event that could said to be the initiating reaction in starting toxicity. With something like an acid, the corrosive effect is equal on all molecules in the cell and the effects devastating for the exposed tissue, which is often the skin. Although the corrosive effects may be local initially, depending on the substance

Introduction to Toxicology: The Necessity of Measurement

19

involved, the toxicity expressed may become systemic as the protective barrier of the skin is broken down and absorption takes place. In individual cells, toxicity may be classiﬁed in broad terms as either reversible or irreversible and there may be a change in functional competence or morphological or biochemical lesions that impair the well-being of the cell. Irreversibility may not be associated with immediate expression of effect, as with the development of adenocarcinoma in young women following maternal exposure to diethyl stilboestrol or with mesothelioma years after exposure to asbestos. In the case of minor functional changes, which might be associated with the activity of cellular pumps or signal transmission capabilities, the changes may be repairable and so prove to be reversible. Where repair is not possible due to the extent of the lesions, the cell may die through two possible routes—necrosis or apoptosis. Necrosis is a process over which the organism’s biochemistry has no control and consequently is accompanied by characteristic morphological changes indicating an almost violent death. It is often associated with the presence of inﬂammation, typiﬁed by the presence of leukocytes that have migrated into the tissue to the site of damage. Apoptosis, or programmed cell death, on the other hand, involves a series of deﬁned biochemical events that result in the removal of the cell contents and membranes in a manner that, in comparison with necrosis, leaves with little morphological evidence. Correct regulation of apoptosis is essential in normal embryonic development. Where a cell is damaged in some way that does not result in immediate necrosis or later apoptosis, the effects may persist for years, without causing any further damage. In cases where there is an unrepaired change in the DNA, this may lie dormant until the cell is stimulated to divide, and if this division is repeated and the process not controlled, the result may be a tumour – benign or malignant. In this way, an apparently benign or invisible change may have devastating effects, years after the relevant exposure is forgotten. Receptors, as distinct from the active sites of enzymes, play an important role in many toxicities. Binding of a foreign chemical at a receptor, instead of, or in competition with the natural ligand, can be expected to result in adverse effects, if the receptor is inappropriately activated or inactivated. As with other mechanisms of toxicity, the effects of receptor binding may be acute, as with tetrodotoxin to sodium channels in the neuronal axons, or delayed, as in tumor promotion by phorbol esters. In the latter case, the phorbol ester binds to protein kinase C that triggers a cascade response, ultimately resulting in cell division in which existing DNA damage can be ﬁxed, leading to tumor growth from previously initiated cells. For toxicities that are expressed through noncovalent binding to pharmacological receptors, it is probable that when the stimulus or ligand for the receptor is removed, the undesirable effect will cease. Receptor effects can be induced indirectly by toxicants reacting at the active sites of enzymes. The reversibility of effect, driven by strength of binding to the site of action, is illustrated by the difference in toxicity between organophosphate and carbamate insecticides. Both these classes of insecticide bind to the active site of acetylcholinesterase,

20

A Guide to Practical Toxicology 2nd Edition

which hydrolyzes the neurotransmitter acetylcholine. Whereas carbamate binding to the active site is relatively transient, the binding of organophosphates lasts much longer, to the extent that it is, in some cases, considered irreversible. Where the target cholinesterase is the neuropathy target esterase, “aging” of the enzyme takes place, resulting in a permanent change. This is the basic mechanism behind organophosphate-induced delayed neuropathy, a persistent effect of exposure to some organophosphates. The role of organophosphate-based sheep dips in the occupational health of farm workers is discussed in chapter 13 (see Box 1 in chapter 13). Where cellular homeostasis is affected, there can be severe consequences for the cell, but where there is widespread effect, consequences are for the whole organism. A classic example of this is the effects of ricin, from the castor bean plant, which is a mixture of enzymatic proteins that fragment ribosomes, inhibiting protein synthesis. Although ricin is known as a parenteral toxin, ingestion of castor beans can be associated with severe toxicity, particularly in the gastrointestinal tract, with large ingestions producing hemorrhagic gastritis, diarrhea, and dehydration. The effects are exacerbated by the presence of ricinoleic acid in the oil of the seed, which increases the peristalsis in the intestine; beyond the intestine, target organs are the kidney and liver. Thus, action at a vital cellular target produces adverse effects in the whole organism. The interaction of one cell with another is another aspect of the cellular basis of toxicity. In normal tissue, adjacent cells have channels between them through which small molecules can pass; cells in which these gap junctions are still patent are less prone to proliferation than when they are closed. Several tumor promoters, for example, phorbol esters and phenobarbital, reduce intercellular communication through gap junctions and this is thought to lead to transformation of the cells and so to neoplasia. The axons of neurons can be extremely long and are dependent on the transport of nutritional components from the neuron cell body. When this transport is disrupted, the axon dies back in the type of reaction that is seen in response to chronic exposure to n-hexane. In this case, metabolism of the hexane to 2,5hexanedione is associated with cross-linking of neuroﬁlaments in the axon and subsequent blockage of transport at the nodes of Ranvier. Here, effects on one type of cell are associated with adverse change (progressive peripheral paralysis) in the rest of the organism. Toxic attack on speciﬁc cell types is characteristic of many chemicals, for instance, the effects of paraquat and 4-ipomeanol in the lung. Paraquat is a widely available herbicide, which has two nitrogen atoms that are the same distance apart as in two endogenous polyamines: putrescine and spermine. This similarity allows it to be taken into the type I and II pneumocytes in the lung via an active transport process, where it accumulates, and with the high local concentration of oxygen, undergoes redox cycling (Fig. 1). This process involves reduction of paraquat by an electron donor (e.g., NADPH) and its reoxidation by transfer of an electron to oxygen. This results in the generation of superoxide radicals, which go on to

Introduction to Toxicology: The Necessity of Measurement

Polyunsaturated cell membrane lipids

21

Lipid hydroperoxides

Singlet O2 Lipid free radicals

O2 NADPH

e−

Paraquat

Superoxide radicals

SOD Reduced paraquat

NADP

O2

Tissue damage

H2O2 Catalase H2O

Figure 1 Mechanism of paraquat toxicity. Source: Adapted from Ref. 13.

form hydrogen peroxide through the action of the protective enzyme superoxide dismutase. Where this enzyme activity is too low to remove all the available superoxide, reactive hydoxyl radicals are produced, with subsequent attack on the cellular lipid membranes through lipid peroxidation. The ability of these cells to concentrate paraquat and the locally high concentration of oxygen work together to cause severe local toxicity, affecting the whole animal. The fact that the molecule is not metabolized to a less toxic form but is regenerated, leaving it free to repeat the cycle many times, leads to depletion of NADPH with signiﬁcant effects on cellular homeostasis. Paraquat also has effects in the kidney and other organs, but it is the lesion in the lung that is responsible for the death of the patient. The effect of the kidney change is to reduce renal function, slowing excretion, and thus exacerbating the toxicity. The mold Fusarium solani, found on sweet potatoes, produces 4-ipomeanol (Fig. 2), which attacks the Clara cells of the lung speciﬁcally, through production by cytochrome P450 of an epoxide on its furan ring. This enzyme is also present in O

OH

O

CH3

Figure 2 Structure of 4-ipomeanol

22

A Guide to Practical Toxicology 2nd Edition

the liver, although it is present there in larger amounts than in the Clara cells, but is less active. In addition, the liver has large concentrations of glutathione (GSH), a tripeptide that is crucial in protection against oxidative attack. Consequently, the Clara cells are at a disadvantage in comparison with the hepatocytes and show the effects caused by binding of the reactive intermediates to cellular macromolecules, leading to necrosis and pulmonary oedema. The most signiﬁcant target in the cell is the DNA. This is subject to a wide range of direct attacks, such as covalent binding and formation of adducts, intercalation of planar molecules and radiation damage. Indirect effects result from the up- or down-regulation of gene expression, which can be detected through the burgeoning sciences of genomics and proteomics. The ability to relate changes in gene expression or protein levels to speciﬁc toxicities will be a powerful tool in the earlier detection of toxicity. EXPRESSION OF TOXICITY The following is a brief review of the ways in which toxicity can be expressed, or its expression inﬂuenced, in individuals exposed to unusual concentrations of any chemical, natural or synthetic; it is not intended to be exhaustive. The expression of toxicity is inﬂuenced by factors inherent in the exposed subject, in addition to the factors listed in section “Strong Toxicants and Weak Toxicants,” including age, disease, pregnancy, genetics, nutrition, lifestyle, sex, and occupation. Metabolism The ability to metabolize and eliminate chemicals at the two extremes of age is, notably different to that seen during the majority of a lifespan. Neonates and geriatric people show different sensitivities to drugs due to differences in liver and kidney function; this can be extrapolated to other chemicals with which they may come in contact. Benoxaprofen was introduced as a new drug for use in arthritis; but due to the normal age related decline in kidney function and metabolizing capability, it was associated with serious toxicity in some geriatric patients. Neonates also show lower drug metabolizing capabilities; in some cases this deﬁciency is protective, in others, it is not. Disease Disease is also a factor to be considered. This may be preexisting or induced by the exposure to the toxicant. The two major organs of concern are the kidney and the liver, in an analogous way to the effects of age. Where there is preexisting cirrhosis of the liver, hepatic function will differ signiﬁcantly from normal. Damage in the liver inﬂicted by paracetamol has the effect of prolonging exposure to the drug. Where liver disease is associated with bilirubinaemia, drugs bound to plasma proteins may be displaced by bilirubin, markedly increasing the plasma concentration of free drug. For drugs such as phenytoin or warfarin, which are highly protein-bound and have steep dose–response curves, a small decrease

Introduction to Toxicology: The Necessity of Measurement

23

in protein binding can more than double the amount of free drug available for pharmacological effect. Protein binding can also be affected in kidney disease, where reduced ﬁltration rates lead to slower elimination and vital blood ﬂows can be affected by other factors such as cardiac disease. It should also be remembered that exposure to some chemicals may increase susceptibility to infection, as with polychlorobiphenyls , which are immune suppressants. Pregnancy Pregnancy is associated with an increase in plasma volume and consequent borderline anaemia and with changes in protein binding. The extracellular space is increased with an associated increase in the amount of ﬂuid available for dissolution of drugs (increased volume of distribution). There is increased cardiac output and changes in respiratory parameters, seen as increased tidal volume, increased distribution, and faster gaseous equilibrium. Retention of contents in the upper gastrointestinal tract is prolonged. Genetics Genetics may affect the response to a chemical through differences in the way in which it is handled, absorption, distribution, metabolism, and elimination. The most common factor is variation or deﬁciency in metabolic enzyme activity. Early discoveries of this were made with isoniazid and debrisoquine, both of which were associated with genetic polymorphisms—slower acetylation of isoniazid and deﬁcient hydroxylation of debrisoquine. There is great variation in paracetamol (acetaminophen) metabolism among individuals by a factor of up to ten, the highest rate being comparable to that in the most sensitive animal species (hamsters) and the lowest to that in the least sensitive (rats). These differences have been exploited in the development of animal models with deﬁciencies in particular enzyme systems. For instance, the Gunn rat has a deﬁciency in glucuronosyl transferase, which is responsible for conjugation (phase 2 metabolism) of initial metabolites of chemicals (phase 1 metabolism). Ethnic differences are important, for instance, native Canadians have a lower capacity for ethanol metabolism than Caucasians. Sex is another factor, especially in hormonal terms; sensitivity to chloroform’s renal toxicity is much greater in male mice than in females. This difference is removed by castrating the males and restored by administration of male hormones. There are signiﬁcant differences between male and female rats in drug metabolism and physiology, which can result in different toxicological responses. Diet Diet and nutrition are also signiﬁcant. The importance of diet is illustrated by the tumor proﬁle for Japanese people in Japan, which is different to that found in west coast Americans. However, Japanese people living in California show a proﬁle of tumors similar to that of their American neighbours. Food restriction in

24

A Guide to Practical Toxicology 2nd Edition

rats and use of a low-protein diet produces an increase in lifespan and a reduction in the incidence of several tumors. Lipid content of diet may be important in affecting absorption of lipophilic chemicals and the ﬁber content of diet affects the bioavailability of toxicants by binding, and thus reducing absorption. Nutrition, as distinct from diet, is also important; anorexia or a diet low in protein can result in lower synthesis of enzymes responsible for metabolism and elimination of chemicals. Related to diet are lifestyle factors such as smoking and alcohol consumption, which can also inﬂuence expression of toxicity. Occupation Occupation can determine the likelihood of toxic expression, either directly or indirectly. Exposure to vinyl chloride was associated with a rare liver cancer, hemangiosarcoma, its rarity and presence in a clearly deﬁned segment of the population lead to epidemiological identiﬁcation of the cause. In uranium miners, there was a greatly increased probability of lung cancer, in those who smoked. Occupational toxicity can be found in more mundane forms. People harvesting parsnips or celery may show phytophotodermatitis, which results from the transfer of psoralens from the plants to the skin and exposure to sunlight, a relationship that may not be readily identiﬁed clinically. From the above, it should be evident that toxicity is manifested in many different ways and can be seen as changed organ function, reproductive effects (sterility, impotence, teratogenicity, loss of libido, transplacental cancer), changes in normal biochemistry, excess pharmacological action, phototoxicity, or as cancer. There are indirect effects, for instance, due to stress, or nonspeciﬁc changes, for which no direct cause can be identiﬁed, such as lowered appetite and associated loss of body-weight. The end result, however, is that toxicity is usually expressed through speciﬁc organs, known as target organs. The problem with this approach is that many of the more potent, often less biochemically speciﬁc chemicals, affect a wide range of organs or tissues. TARGET ORGAN EXPRESSION OF TOXICITY As suggested, the disadvantage of the classic approach to target organ toxicity is that, too often, the organ is considered in isolation from other organs or from the rest of the organism. It is convenient to teach toxicology in this way, but it means that it can be difﬁcult to cross-link information so that interrelationships are evident. In considering the toxicity of a chemical, it is important to keep the general view in mind; equally in looking at the effects in one organ or tissue, it is important to remember the rest of the organism. Paracetamol is one of the classic hepatotoxins but it also affects the kidney. Phenytoin, used in the control of epilepsy, can result in convulsions in overdose (it has a low therapeutic index or safety margin), chronic use is associated with gingival hyperplasia; it is a teratogen and can cause hypersensitivity with extensive dermal reactions. Lead has effects

Introduction to Toxicology: The Necessity of Measurement

25

Table 3 Factors in Target Organ Toxicity Factor

Examples

Blood supply

Liver, kidney, and lung have greater blood supplies than adipose or muscle tissue Lung and paraquat toxicity Gastrointestinal mucosa, bone marrow, and toxicity of cytotoxic chemotherapies Hepatic change may be easily repaired while change in the CNS is not Concentration effects in the distal renal tubule Length and diameter of axons in the peripheral nervous system Liver and xenobiotic metabolism. Renal proximal tubule versus the Loop of Henle. Oxygen concentrations Reproductive tract and endocrine organs. Induction of hepatic metabolism and increased clearance of thyroid hormones Lung and paraquat; adipose tissue and TCDD; cadmium in kidney; lead in bone. Environmental accumulation of pesticides such as DDT High concentrations of antioxidant GSH in the liver. DNA repair differences or deﬁciencies

Oxidative exposure Cell turnover Repair and reversibility Physiology Morphology Processing ability or metabolic activity Hormonal control Accumulation

Protection mechanisms Source: Adapted from Ref. 3.

on learning ability, in the nervous system, in the blood, and in the kidney and is associated with reproductive changes and may be carcinogenic. The susceptibility of organs to the effects of chemicals is inﬂuenced by a number of factors, some of which are discussed below. There is a number of factors that inﬂuence the extent to which the effects of a chemical are expressed in particular tissues and these are summarized in Table 3 and expanded in the following text.

Blood Supply The blood is the main vehicle for distributing chemicals of all kinds around the body, and it is logical that the blood supply is important in deﬁning the degree of exposure of individual tissues to the chemicals in the blood, endogenous as well as foreign. The liver receives all the blood supply from the gastrointestinal tract via the inferior vena cava, from where it goes to the heart and thence to the lungs. Thus, chemicals absorbed in the gut go to the liver, the main site of xenobiotic metabolism, and are distributed with any persistent metabolites to the heart and then on to the lungs and kidneys, which receive 25% of the cardiac output via the aorta.

26

A Guide to Practical Toxicology 2nd Edition

Oxidative Exposure Much toxicity is due to oxidative attack on macromolecules and this is affected by blood supply and, of course, in the lung where the locally high concentration of oxygen is partly responsible for the high toxicities seen with compounds like paraquat. Cell Turnover Tissues that have an intrinsically high turnover of cells are at risk from chemicals that inhibit cell division. These include the mucosa of the gastrointestinal tract, the skin, the bone marrow, and the testes. Inhibition of the division in the bone marrow can affect the whole organism through induction of anaemia and/or reductions in the numbers of circulating leukocytes, in turn leading to reduced immunecompetence. Where there is a high level of apoptosis, for instance, in developing embryos, disturbances in cell turnover have the potential to result in malformations in the foetus. Where cell turnover is increased, for instance, through necrosis with replacement through increased cell division, there are inherent risks of DNA replication errors, which can lead in the long term to tumor formation. Repair Ability and Reversibility An important aspect of assessing the signiﬁcance of toxic effect is whether it is reversible, either on removal of the stimulus or through repair of tissue damage. The extent to which tissues can repair themselves differs markedly according to tissue type and to an extent, embryonic origin. Some tissues are able to repair themselves readily, especially the liver. In rats, given toxic doses of carbon tetrachloride, early evidence of liver damage seen in the plasma a few days after administration is frequently not reﬂected in histopathological evidence of damage after 14 days. This considerable capacity for self-repair means that it is possible to miss toxicologically signiﬁcant hepatotoxicity in standard acute toxicity tests, which require single administration followed by 14 days observation before autopsy. This repair capability is seen in humans following overdose with paracetamol (acetaminophen) where there is often severe liver toxicity; in survivors, biopsy of the liver three months after the overdose sometimes shows no evidence of persisting liver damage. Equally, some tissues do not readily repair themselves, especially the nervous system. In these tissues, regeneration does not take place or is very slow. Whereas, a necrotic hepatocyte can be quickly replaced, a necrotic neuron is lost completely and the function of that part of the nervous system reduced proportionately. In some organs, particularly the kidney, different parts have different capabilities for repair. Thus, damage to the glomerulus and the renal pelvis is not readily repaired but the proximal tubule epithelium shows considerable repair capability, provided the basement membrane (on which the cells lie) is not breached.

Introduction to Toxicology: The Necessity of Measurement

27

Physiology Cells or tissues with speciﬁc characteristics are susceptible to toxicants, which disrupt or take advantage of those characteristics. Paraquat is an example of this, through its accumulation in the lung, via the uptake mechanism for the endogenous polyamines. In the kidney, the passage of the urine through the distal tubule can lead to toxicity, as the toxins increase in concentration as water is reabsorbed. Morphology The length and small diameter of axons in the peripheral nervous system contribute to the axonopathy induced by n-hexane due to cross-linking of the microﬁlaments and subsequent poor nutrition of the distal parts of the cell. This is an instance where physiology is also important, as the axon depends on transport of nutrients from the neuronal body and appears to be unable to acquire them from elsewhere. With the passage of nutrients blocked, the axon dies distally from the blockage. Gross morphology is also a factor to be considered, if only rarely. When fed, the stomach of a rodent may press on particular lobes of the liver, restricting circulation in that lobe; this has been known to affect the distribution of liver tumors among the lobes, seen in response to carcinogens fed in the diet. Processing Ability Tissues that have high processing or metabolic activity are also frequent targets of toxicity. The liver has high activities of enzymes responsible for chemical metabolism and, therefore, if toxic metabolites are produced, they are likely to be produced in higher concentrations than in other tissues, increasing the risk of local effect. The difference between the liver and the lung in terms of enzymic activity is one of the determining factors in the toxicity of 4-ipomeanol. The proximal tubule of the kidney is another site of high metabolic activity and is a frequent target. High metabolic activity may also mean greater potential for oxidative attack through oxygen radicals, which can be produced as a result of normal metabolic processes. The kidney is also at risk through its normal physiological function of producing concentrated urine; this can increase the exposure of cells in the nephron to a point at which toxicity is elicited. Hormonal Control Tissues that are subject to hormonal control will be affected when the concentrations of the relevant hormones are increased or decreased. When hepatic enzymes are induced in rats, there is often an increase in follicular hypertrophy or hyperplasia in the thyroid due to increased removal of thryoid hormones from the plasma as a result of the increased hepatic metabolism. The plasma levels of thyroid stimulating hormone are controlled by circulating thyroid hormone concentrations by negative feedback; where this feedback is reduced, the pituitary is stimulated to produce more thyroid stimulating hormone, which acts on the thyroid. The

28

A Guide to Practical Toxicology 2nd Edition

endocrine system is extremely complex and effects in one part can have a number of knock-on changes in other tissues. Accumulation Tissues that are able to accumulate speciﬁc toxins are also frequent targets for toxicity. Paraquat features here again in lung toxicity. Cadmium is widespread in the environment and accumulates in shellﬁsh and plants. In mammals, cadmium is complexed with a metal-binding protein, metallothionein, which accumulates in the kidney. When a critical level of cadmium content in the kidney is reached— generally quoted as being approximately 200 ␮g/g of kidney tissue in humans— nephrotoxicity becomes evident and renal failure follows. Constant low intake at slightly raised levels can produce gradual accumulation over many years, which ultimately results in renal failure. Accumulation in bone is a feature of toxicity of lead and strontium, which is a cause for concern if the strontium is the radioactive isotope. Bisphosphonates, used in the treatment of osteoporosis, also bind tightly to bone and this is a source of some of their toxicity. Environmental accumulation is also a factor to consider because it can have dire consequences, as illustrated by concentrations of fat-soluble compounds such as DDT, which increase in concentration up the food chain, as in bird of prey populations. DDT, and similar compounds such as TCDD, tend to accumulate in lipid tissue from which they are released very slowly. This is particularly a problem in species at the top of the food chain and has recently been acknowledged to be a factor in marine mammal toxicology. At one time Americans were, by their own regulatory standards, inedible due to the amounts of DDT they had accumulated in their adipose tissue. For such compounds, toxicity can be expressed if there is a sudden loss of weight, reducing adipose tissue and releasing large amounts of toxin into the plasma where it can pass to the target organs, as in migration or pregnancy in malnourished people. In the development of brown-ﬁeld sites, care must be taken that the residues of any industrial waste are considered in licensing use of the land, especially for growing food crops. This was a major source of toxicity at Love Canal in New York State, where a housing estate was built on a toxic waste dump. Protection Mechanisms Some tissues, particularly the liver, have high concentrations of endogenous compounds that have protective functions, normally against active oxygen species. GSH, which may be present in the liver at a concentration of up to 5 mM, is a good example of this. Enzymes such as superoxide dismutase, which catalyzes the conversion of superoxide to hydrogen peroxide, are also important in protection of the cell. There are also differences between tissues in the activity of DNArepair mechanisms. For example, the brain is less able than the liver to excise the DNA base guanine methylated at the O6 position, making it more susceptible to tumor formation following administration of dimethylnitrosamine. Defective

Introduction to Toxicology: The Necessity of Measurement

29

DNA repair is also seen in patients with xeroderma pigmentosum, which gives a high incidence of skin cancer in response to exposure to UV light. The problem in drawing such distinctions is the same as with describing toxicity in terms of target organs. A single chemical may be associated with effects in several organs and have a different mechanism of toxicity in each due to the differences in tissue susceptibility. This breadth of possible effects makes testing for toxicity extremely complex, until a mechanism is suspected. The enormous range of potencies of the chemicals to which we are exposed is an additional complication. THE NECESSITY FOR TOXICOLOGICAL ASSESSMENT It is a moral requirement that new drugs, pesticides, or food additives should be as safe as are reasonably possible, when they are made available to the doctors, farmers, or consumers. The degree to which a product must be safe is determined by its intended use. Pesticides or food additives should be entirely safe at the levels at which consumers are exposed. Pesticides, by their nature, are toxic to the target species but should be safe for non-target species. Food additives, whether added for processing reasons or ﬂavor or as preservatives have a lower margin of tolerance for safety than pesticides, for which an interval between treatment and harvest can be set together with an acceptable daily intake. With drugs, the acceptable margin of safety, the difference between therapeutic and toxic doses, is dependent to a large extent on the indication for which they are intended. Toxicity, seen as side effects, is more tolerable in an anticancer drug than in an analgesic sold over the counter. To ensure that the required margin of safety is demonstrated, for instance, for a new drug, it is essential to conduct a program of experiments to assess the toxicity of the new molecule, speciﬁcally to describe a dose–response curve. From these data it should be possible, with appropriate interpretation and experimental support, to extrapolate the effects seen to humans. For chemicals that are already marketed, toxicological assessment becomes necessary when effects are seen in consumers that have not been seen or noticed before. In this case, the intent is to establish a mechanism for the toxicity observed and to recommend appropriate changes, in the way the chemical is sold or in the way in which it is used. It is a fact of life that it is not considered ethical to administer new drugs to humans without some assessment of their effects in other test systems. With chemicals that are not intended primarily to be administered to people (e.g., pesticides), the restraints on giving them to humans are even greater. As a consequence of this, it is routine, at the current development of the science, to use animals in toxicological safety evaluation programs or in experiments that investigate mechanisms of toxicity seen in humans. In using animals, it is increasingly understood that their use should be regulated to high ethical standards. A plethora of evidence indicates that animals can be good models for the behavior of chemicals in humans and that they are the

30

A Guide to Practical Toxicology 2nd Edition

only ethical and valid test system. Evidence also suggests that they are not good models and that their use should be discontinued completely. Both positions are extremes and inevitably the truth probably lies between them. In other words, an ideal situation is where the use of animals is reduced to an extent where there is sufﬁcient scientiﬁc “comfort” to make a sensible and secure assessment of the risks. For some chemicals, one species will be a better model for humans than another, and for this reason, it has become normal practice to study toxicity of new drugs or pesticides in two mammalian species. Considerable savings could arise from validating one or other species, or at least not requiring work in “invalid species.” ETHICS OF TOXICOLOGICAL ASSESSMENT The use of animals instead of humans in toxicity testing has been considered brieﬂy above. In a sense, humans are used at lower doses than in animals in safety studies with new drugs. These early studies are to assess the pharmacokinetics and any adverse effects in healthy volunteers (phase I clinical studies) and then to study safety together with some aspects of efﬁcacy, in greater detail in patients (phase II studies). However, no administration to volunteers is allowed until an initial battery of toxicity tests has been conducted to assess the new molecule and to provide data, from which to calculate a safe starting dose in humans. The costs of such clinical trials bear out the contention that, using humans as test models for humans is hugely expensive (as patients can be scattered across centres around the globe), inconvenient, and slow. There is the additional concern, as with animal models, that experiments in some groups of humans may not be relevant to other groups, as indicated above for isoniazid in Eskimos and Egyptians. In fact, the inherent variability of humans is being exploited in pharmacogenetics, which studies the genetic basis for variations in drug metabolism and toxicity, and should eventually give data that allow design of speciﬁc treatment regimens for patients with speciﬁc phenotypes. If a valid cross section of the human global population were used, the variability present would be so great as to obscure subtle but important changes from normality. The traditional view is that there is no escape from the premise that for effective toxicity testing the variability in the test system must be controlled to allow a satisfactory deﬁnition of normality. Change from a carefully deﬁned and understood baseline can be more readily detected than in a diverse population of unmatched individuals. The test system must also be inexpensive and easy to look after, as the volume of toxicity testing is so great that the expense would become prohibitive otherwise. The volume of toxicological research and experiment is partly due to the numbers of new chemicals under development and partly due to regulatory guidelines imposed by governments. Mostly it is a compromise, balancing cost against failure; some might say that science has lost out, but science and politics are uneasy bedfellows. The cost or risk beneﬁt of the chemical has to be assessed in deciding the necessity or ethical acceptability of undertaking toxicity studies in animals. In

Introduction to Toxicology: The Necessity of Measurement

31

the case of cosmetics, it has been decided that the use of animals to test cosmetic ingredients or products is now unacceptable, meaning that cosmetic toxicity has to be assessed in other ways. However, although such methods of safety assessment may be acceptable in testing of voluntarily used cosmetics, they are not applicable to food additives, pharmaceuticals, or pesticides to which human exposure may be involuntary or indicated by illness. Furthermore, nearly all cosmetics are for use on the skin or in the mouth and the risks of using them are very different from those encountered with a pharmacologically active drug given by mouth or injection. Some of the most aggressive chemicals used in our personal lives are fragrances. There are, at present, no ethical concerns about using long-lived cell cultures in toxicity testing. Some cells for use as test systems can be obtained by taking a blood sample from a healthy volunteer, for example, leukocytes, or from tissues obtained at operations from patients; these also pose no ethical problem, unless the tissues are obtained without patient consent. Primary cell cultures and preparations of cell organelles such as microsomes, however, require fresh cells derived from a freshly killed animal. Is an experiment that uses an animal in this way more ethical than one that uses a complete and conscious animal? In assessing the relevance of the data for humans, the process of extrapolation from an isolated culture of rodent hepatocytes to humans is much more precarious than making the same leap from a complete animal having all the organ interrelationships intact. It is fundamental that if some toxicity studies are ethically essential, there are some that should not be conducted. The ban on the use of animals to investigate cosmetics and their ingredients has been discussed above. Other examples are more complex; is it necessary to investigate the acute toxicity of a household cleaner if it is thought that it may be ingested accidentally by children or purposefully by adults? In the case of natural constituents of a traditional food, for example, mushrooms, is it ethical to investigate the toxicity of individual components? Possibly, especially if there has been evidence gathered from humans that there is a problem for which it is considered that the food or its constituent is responsible. Is it ethical to undertake an experiment on such a constituent that exposes a single group of mice to an unrealistically high dose in the drinking water for 2 years? The inescapable conclusion from the published data for the mouse study by McManus and coworkers (Box 2) is that the experimental design was deﬁcient (at the very least), the study was not reported adequately, and that it served no useful purpose; consequently, in my opinion, the animals were needlessly used. In the absence of dose response information, no risk assessment for humans was possible, yet one of the conclusions was that humans should not eat mushrooms, despite the many years of human consumption without any serious suggestion from epidemiological studies of any hazard, when eaten at normal amounts. If this ﬂawed reasoning were rigorously applied to the whole human diet, we would soon die of starvation or boredom. Hopefully, this type of ill-conceived experiment would not be considered ethical in the current, or indeed, in any climate.

32

A Guide to Practical Toxicology 2nd Edition

Box 2 Studies with the Constituents of Mushrooms The natural constituents of mushrooms have been widely investigated for their carcinogenic potential and the results published in a number of papers. r One study (14) looked at the carcinogenicity of a constituent of Agaricus

r

r r

r

xanthodermus, an inedible species, albeit related to the common ﬁeld mushroom; this experiment used subcutaneous administration and as a result, is of dubious relevance to people who ingest their food. Production of tumors at the site of administration could have been expected. In another study (15), 4-hydrazinobenzoic acid, a constituent of the common mushroom, was given in drinking water at 0.125% to a single group of Swiss mice, equivalent to approximately 5 mg/d/mouse or about 125 mg/kg/day for a 40-g mouse. There was “substantial” early mortality due to rupture of the aorta. In survivors, a proportion of the mice developed unusual tumors in the aorta—the site of the initial toxicity—diagnosed as leiomyomas or leiomyosarcomas. No dose–response information could be gained from this experiment (there was only one group); the formulation of the chemical in the drinking water did not mimic the natural occurrence of the chemical. The only conclusion that could be drawn directly was that hydrazinobenzoic acid given in the drinking water caused tumors in Swiss mice in this study. In the absence of dose–response information, especially a no effect level, no risk assessment for human use is possible from these data and conclusions about human use cannot sensibly be drawn. Other studies have failed to show carcinogenic potential for the common mushroom or its constituents (16,17). The study by Toth and coworkers in 1997 suggested that the negative ﬁnding was due to insufﬁcient mushroom intake, acknowledging the fact that if you are sufﬁciently dedicated you can induce cancer in mice eventually, so long as the strain, dose levels, and design are chosen appropriately.

In assessing the ethical need for a toxicological experiment using animals, it is important to question the objective of the study and to assess the design in the light of that objective. If the experiment is not being undertaken to answer a speciﬁc question of human concern or the design will not allow the generation of meaningful data, the need for that experiment should be carefully questioned.

THE THREE Rs: REDUCE, REFINE, AND REPLACE One of the cornerstones of modern toxicological investigations is the concept of the three Rs—reduce, reﬁne, and replace, put forward by Russell and Burch (18). The intention is to reduce the numbers of animals used in toxicological

Introduction to Toxicology: The Necessity of Measurement

33

experiment, to reﬁne the methods by which they are used, and to replace the use of animals as appropriate alternative methods become available. A successful example of this approach is the replacement of rabbits in pyrogen testing. Pyrogens, sterilization-resistant components of bacteria which may be of importance, especially in parenteral solutions, may be detected in batches of ﬁnished product by injection into the ear veins of rabbits and monitoring the temperature response. This test is costly in terms of labour and animals and is also subject to interference by the presence of pharmaceuticals in some preparations; in addition, it does not give a measure of the amount (only the potency) of pyrogenic substances present. The rabbit has popularly been replaced to a large extent by an in vitro system using a lysate of amebocytes from the horseshoe crab Limulus; this test is considerably more sensitive than the rabbit test and is one of the best examples of a fully validated alternative assay in use in toxicology. Even so, the output from the two tests is not identical. A high endotoxin level does not necessarily lead to pyrexia. The use of rabbits or mice in bioassays for potency of various biological pharmaceutical preparations, such as insulin, has been greatly reduced by the use of more precisely targeted pharmacological or analytical tests. This is exempliﬁed by the large reduction in numbers of biological tests described in the British Pharmacopoiea for 1993 in comparison with that for 1988. Replacement of animals in toxicological testing is inherently simpler if a speciﬁc endpoint is being investigated, whether pyrogen content or DNA damage. The more complex or uncertain the endpoint, the more difﬁcult it is to devise a simple test that will answer the question. Reﬁnement of testing methods and protocols is also a long-term goal; the use of guinea pigs in allergenicity testing has been largely superseded by the local lymph node assay in mice. Animal experimentation has also been reﬁned by careful application of statistics in the design of experiment protocols. The pursuit of the three Rs is an ongoing process but it can be expected to be long and, in all probability, ultimately incomplete. The achievement of the ﬁrst 10% to 20% has been relatively easy; the next 20% will be much more difﬁcult, as the endpoints to be studied become less amenable to simpliﬁcation. It follows that the next 20% beyond that will be harder and slower still but this should not be taken as a reason for not investigating further. Much is made of the minimal study design, which results from use of the three Rs; this approach is fraught with risk as, like a net with a wider mesh, more errors can creep through. Much better would be an optimized study design. In all the current enthusiasm for the three Rs, the purpose and objectives of toxicological investigation should not be forgotten. Mostly, these tests are undertaken to elucidate potential safety of the use of chemicals by humans. While the use of animals should be questioned, controlled, and reduced, it should be remembered that use of too few animals in an ill-conceived experiment is as morally questionable as the use of a study design that will achieve the objectives of the study or experimental program. If it is accepted that the development of new chemicals is necessary or inevitable (or the use is proposed of naturally occurring chemicals in an unnatural

34

A Guide to Practical Toxicology 2nd Edition

context or quantity) it should be accepted that their safety, or otherwise, should be investigated up to state of the art. Such investigation is essential in the development of new drugs, food additives, pesticides, or veterinary medicines. While the two ﬁrst categories are expected only to be in contact with humans, pesticides and veterinary products are not intended for human exposure. Pesticides are subject to a wide range of other tests to examine their effects on beneﬁcial species, such as bees and ﬁsh, in an assessment of their likely environmental effects. Toxicity testing is also useful in investigating the effects of chemicals or dietary components that are believed to be associated with, or which exacerbate human disease. The necessity of such testing is decided in part by regulatory guidelines (for the three major categories of registered chemicals) and partly by scientiﬁc need judged from the expected properties of the chemical. Where animals are used, there should be local ethical review committees that monitor numbers and procedures, and ensure that the highest possible standards of ethical research are maintained. Toxicity testing therefore has to assess the probability of an enormously wide range of reactions—covalent, noncovalent, hormonal, and metabolic, the basis for which is at the cellular level; although this extends in many instances to the whole organism, and is dependent on interrelationships between organs or tissues. The simplest way to do this for unknown or unpredicted mechanisms is to examine the response of a whole organism to the test chemical and to screen for as many endpoints as possible in a set of general tests. Where an unexpected reaction is seen, mechanistic studies can be undertaken to investigate precise endpoints and it is in these precisely targeted experiments that in vitro systems become powerful and effective. In the ﬁnal analysis, toxicological data cannot be interpreted unless the signiﬁcance and meaning of detected change is thoroughly understood. When the meaning of the test results is known, it should be possible to take the relationships shown and the targets identiﬁed and relating these to expected effects in humans. For chemicals which are coming to market and signiﬁcant public exposure for the ﬁrst time, the process of evaluation continues after sales begin, to monitor for unexpected effects, which can then be investigated in appropriate mechanistic or epidemiological studies. It should be borne in mind that correct interpretation of data is often lacking in the immediate aftermath of a crisis. The rest of this book looks at how toxicity tests are conducted, how the results are interpreted, and then at the process of how these conclusions are used in risk assessment. However, the ﬁrst step in all this is to deﬁne normality, so that change from expectation can be detected in the ﬁrst place. This is the subject of chapter 2. In some ways, the ethics of toxicological testing are driven by the suggestion that, if you do not know what you will do with the answer, you should not ask the question in the ﬁrst place. It is too easy to fall into the trap of routine regulatory requirement. All tests conducted should have some degree of scientiﬁc justiﬁcation, although it must be acknowledged that the sometimes arcane requirements laid down by regulatory authorities make this difﬁcult to achieve.

Introduction to Toxicology: The Necessity of Measurement

35

One of the objectives of this book is to make toxicologists and the users of toxicology think about the subject and use of toxicology and to question its conduct at every stage.

REFERENCES 1. Liebler DC: The Poisons Within: Application of Toxicity Mechanisms to Fundamental Disease Processes. Chem. Res. Toxicol. 2006; 19:610. 2. Ball P: The Devil’s Doctor: Paracelsus and the World of Renaissance Magic and Science. London: William Heinemann, 2006. 3. Woolley A. A Guide to Practical Toxicology. 1st ed. London: Taylor and Francis, 2003. 4. Klaassen CD: Casarett & Doull’s Toxicology; The Basic Science of Poisons, 6th ed. New York: McGraw-Hill, 2001. 5. Ellenhorn MJ. Ellenhorn’s Medical Toxicology, 2nd ed. Philadelphia: Williams and Wilkins, 1997. 6. Harber VJ, Sutton JR. Endorphins and exercise. Sport Med 1984; 1(2):154–171. 7. Sforzo GA. Opioids and exercise. An update. Sport Med 1989; 7(2):109–124. 8. Shepherd RJ. Vehicle injuries to joggers. Case report and review. J Sport Med Phy Fitness 1992; 32(3):321–331. 9. Horton R. Genetically modiﬁed foods: Absurd concern or welcome dialogue. Lancet 1999; 354:1314–1315. 10. Kuiper HA, Noteborn HPJM, Peijnenburg AACM. Adequacy of methods for testing the safety of genetically modiﬁed foods. Lancet 1999; 354:1315–1316. 11. Ewen SWB, Pusztai A. Effect of diets containing genetically modiﬁed potatoes expressing Galanthus nivalis lectin on rat small intestine. Lancet 1999; 354:1353–1354. 12. Bateson PPG. Genetically modiﬁed potatoes (letter). Lancet 1999; 354:382. 13. Timbrell JA. Introduction to Toxicology. London: Taylor and Francis, 1999. 14. Toth B, Patil K, Taylor J, et al. Cancer induction in mice by 4hydroxybenzenediazonium sulphate of the Agaricus xanthodermus mushroom. In vivo 1989; 3(5):301–305. 15. McManus BM, Toth B, Patil KD. Aortic rupture and aortic smooth muscle tumours in mice: induction by p-hydrazinobenzoic acid hydrochloride of the cultivated mushroom Agaricus bisporus. Lab Invest 1987; 57(1):78–85. 16. Pilegaard K, Kristiansen E, Meyer OA, et al. Failure of the cultivated mushroom (Agaricus bisporus) to induce tumors in the A/J mouse lung tumour model. Cancer Lett 1997; 120(1):79–85. 17. Toth B, Erickson J, Gannett P. Lack of carcinogenesis by the baked mushroom Agaricus bisporus in mice: Different feeding regimen. In vivo 1997; 11(3):227–231. 18. Russell WMS, Burch RL. The Principles of Humane Experimental Technique. London: Methuen, 1959. 19. Poland A, Knutson JC: 2,3,7,8-Tetrachlorodibenzo-p-dioxin and related halogenated aromatic hydrocarbons: Examination of the mechanism of toxicity. Ann Rev Pharmacol Toxicol 1982; 22:517–554.

2 Normality: Deﬁnition and Maintenance

INTRODUCTION The whole basis of toxicological investigation is to detect differences from experimental normality that are attributable, with reasonable certainty, to the inﬂuence of the substance under investigation. This simplistic overview, however, then begs the question as to what is normal or, by association, natural. Dictionary deﬁnitions of normal use words such as usual, typical, or expected; the normal state or condition or being in conformity with a standard, for instance, as shown by body temperature. Natural is deﬁned as existing in or derived from nature; not artiﬁcial; in accordance with nature; or normal. In terms of public perception, normality is seen so routinely that it may be more useful to think of abnormality, which can provoke a reaction that is not seen in response to the normal. Equally, there are degrees of abnormality. Someone in a wheelchair, with shortened limbs due to exposure to thalidomide, may be seen as more abnormal than a person in a wheelchair because of an accident; the former will always be disabled while the latter may be “normal” again. Such simple judgment is based on perception, which may not be readily supportable in scientiﬁc terms. In toxicological terms normality can usually be deﬁned by numerical data, means, or incidence data or, less veriﬁably, experience. For characteristics that are deﬁned by presence or absence or narrow ranges of values, deﬁnition of normality is relatively simple in comparison with those that are present on a graduated scale or have a wide range of value. Deviation from normality may be determined through the circumstances of the observation and according to experience or expectation; left-hand–drive cars are not normal in the United Kingdom but are clearly normal in France. Similarly, a tumour may be expected routinely in old age (when it could be said to be normal) but unexpected at the age of 21. It was this characteristic that indicated diethylstilbestrol as a carcinogen; vaginal adenocarcinoma is unusual 37

38

A Guide to Practical Toxicology 2nd Edition

in young women but was seen in the young daughters of women who had taken diethylstilbestrol in pregnancy to prevent abortion. Another example is that given by the antihistamine, terfenadine, which was responsible for approximately 430 adverse cardiac reactions and 98 deaths due to severe cardiac arrhythmias between 1985 and 1986. To put this apparently alarming ﬁgure in perspective, this represented roughly 0.25 adverse reactions per million daily doses sold (1). Such a low incidence is likely to be subsumed in the background for some time before coming to light as clinical experience or an epidemiological database grows and someone makes a connection (which may be due to some serendipitous insight). Cardiac arrhythmia that is not related to drug use is found in the general population and therein lies the problem, as with so much in toxicology. One of the greatest challenges in toxicology is the detection of minor differences from normality or background incidence and a meaningful assessment of their signiﬁcance in the real world of clinical or consumer use. WHAT IS NORMALITY? Normality, or abnormality, may also be indicated by the presence or absence of an observation. The thalidomide tragedy was shown by the presence of severely shortened limbs, phocomelia, in babies born to mothers who had taken thalidomide in the ﬁrst 40 days of pregnancy, although other abnormalities became apparent as investigations continued. This was a demonstration of an increase in a very rare observation in a speciﬁc population, associated with exposure that was deﬁnable in terms of dose and day or week of pregnancy. Abnormality may be deﬁned in biochemical terms, usually by the absence of enzymes responsible for some aspect of basal metabolism. Phenylketonuria is associated with a recessive deﬁciency for phenylalanine hydroxylase. This leads to increased excretion of metabolites of phenylalanine that are responsible for neurological effects, including mental retardation and low IQ; many mutations have been reported for this gene. Deviation from normality is also deﬁnable through changes in the incidences of observations, which may then be associated with exposure (in epidemiological studies) or with treatment (in toxicity studies). Phocomelia and hemangiosarcoma (due to occupational exposure to vinyl chloride) are both seen in a normal population but at incidences that are so low as to make them abnormal. In contrast to this, lung cancer may be seen in people who do not smoke and might be seen as part of the background and normal tumour incidence in a nonsmoking population. However, there is a clear association of lung cancer with cigarette smoking, marking this as a deviation from normality that is attributable to a toxic exposure. In a similar way, excessive consumption of alcohol during pregnancy is associated with fetal alcohol syndrome seen in the babies born to these mothers. The above are examples where the incidences of presence or absence of data have changed in response to exposure or treatment. Where toxicological, as opposed to epidemiological, investigation is concerned, the most usual way of demonstrating deviation from normality is through statistical analysis of continuous data from the tests conducted. Continuous data, as opposed to positive

Normality: Deﬁnition and Maintenance

39

0.025

0.95

0.25

Mean − 1.96 SD

Mean

Mean + 1.96 SD

Figure 1 Characteristics of the normal distribution. Source: Adapted from Refs. 2, 3.

or negative, presence or absence can be readily exempliﬁed by height in people. It is relatively easy to say if someone is abnormally short or tall, for example, 1.2 or 2.5 m. However, this judgment becomes much more difﬁcult if the subject is between 1.5 and 1.8 m. The average male height in a population may be around 1.70 m but that population would probably encompass the very short and very tall, grouped in a classic bell-shaped or normal distribution (Fig. 1) (2,3). This distribution is characterized by a mean that falls at the center of the distribution but which does not reﬂect its width or range of values in the population. The range of values present is deﬁned by the standard deviation of the mean, which tends to be large when there is a wide range of values and smaller with a narrow range. The standard deviation will also tend to get smaller with increasing sample size (n). In a group of 500 men taken from different sports, the mean heights of two samples of 100 randomly chosen individuals are unlikely to be signiﬁcantly different. Equally, the mean height of a sample of 50 football goalkeepers is likely to be fairly uniform and so have a small standard deviation. In fact, in comparison with the mean height of 50 jockeys, the goalkeepers might be seen as unusually taller and the two samples would probably be signiﬁcantly different when compared statistically. If the two samples of 50 were combined, the mean would fall somewhere in the middle and the standard deviation would increase to reﬂect the wider range of values in the more diverse sample. In this instance, two samples of deﬁned individuals have been extracted from a relatively undeﬁned population. In toxicology, the deﬁnition of the two samples is provided by treatment of a test system in comparison with untreated controls. The characteristics of the normal distribution means that 95% of values lie within 1.96 standard deviations of the mean; these are the 95% conﬁdence limits. However, this does not necessarily mean that the values falling outside these limits are abnormal; can abnormality be assigned arbitrarily to obvious outliers? The normal distribution plays a central role in assessment of numerical data in toxicology

40

A Guide to Practical Toxicology 2nd Edition

because it forms a basis of making comparisons of treated groups against controls. Effect is demonstrated by showing the null hypothesis (that there is no difference between controls and treated groups) to be false (i.e., that there is a difference between the two populations, treated and control). However, demonstrating such a difference does not necessarily imply abnormality; two samples of 21-year-old males may have mean heights that are signiﬁcantly different, but this does not mean that one group is abnormal. Although it is useful to consider normality within populations, it is also applicable to individuals and is affected by factors that inﬂuence normal function, including disease. During pregnancy there is a number of important changes from individual normality that affect the composition of the blood and how chemicals are cleared from the body. Paradoxically, pregnancy is a normal condition with its own limits of normality. Age is also an important consideration and, normality for an individual, deﬁned by an assortment of parameters, drifts with increasing age. Factors that change with age include protein binding, clearance, metabolism, renal, and CNS function. There is a general tendency for normal function to decline with age, for example, in the kidneys or central nervous system. Normal age-related decline in clearance may result in abnormal reaction to drugs, such as that seen in adverse reactions to benoxaprofen. These affected a number of elderly patients and eventually led to the drug’s withdrawal from the market. Such decline is normal, but it may be accelerated in some cases by chronic exposure to chemicals; this acceleration clearly results in abnormality at an earlier stage than expected. Normality in the very young is also different from that in adults. Neonatal absorption for different chemicals can be more or less extensive than that seen in adults, young or old; and this clearly has an effect on the way babies handle drugs or other chemicals. Abnormality may be singular, in that an individual may be normal in every respect except one, deformity of one arm for instance, or multiple. However, a single genetic defect can have multiple effects as in trisomy 21 or cystic ﬁbrosis, the abnormalities of which are interconnected. At some point, a judgment becomes necessary as to what is normal and what is not; ideally, this is based on numerical data or a scientiﬁc appreciation of qualitative data. Frequently, however, a subjective judgment is made and the perceived abnormal is treated with suspicion. This tendency has a huge inﬂuence on the public perception of the effects of chemicals of all kinds – food additives, pesticides, components of genetically modiﬁed crops, new drugs, etc. Normality may be judged against difference from expectation; this is simple for presence or absence phenomena but more complex for a sliding scale such as height. A distinction may be made between an objective, mathematical deﬁnition, and the subjective perception of normality. At what point is a tall man abnormally tall, and is this perception the same for everyone? A very tall person might consider people of average height to be short, when in fact they are mathematically normal in height. The people of the Netherlands are generally taller than those of other European countries, but this does not indicate abnormality in either population. Clarity of difference makes these judgments much simpler; however, such clarity

Normality: Deﬁnition and Maintenance

41

is a luxury that is not often available in toxicology. Some treatment-related effects may not render the treated test system abnormal, but could signiﬁcantly affect life expectancy. if allowed to continue. It is this subtlety of effect that makes deﬁnition of normality in toxicology so important. NORMALITY AS A RANGE The example of the goalkeepers and jockeys, given above, is an example of the fact that biological normality is seen as a range of values that is deﬁned by its low and high values. Typically, this takes the form of a population mean and standard deviation; a simplistic deﬁnition of normality might then be that any value that falls within the 95% conﬁdence limits of the mean is normal; values outside that may be statistically deﬁned as outliers and, by implication but not necessarily fact or judgment, to be abnormal. The crucial point here is that the extent of variation within the normal population dictates how easy it is to detect toxicologically or biologically signiﬁcant change from normal. Some parameters of clinical pathology, such as plasma concentrations of sodium and potassium, are tightly deﬁned with a low coefﬁcient of variation; this is a reﬂection of their physiological importance. A normal range for sodium might be between 140 and 150 mmol/L; a deviation from these limits of only 10% may be associated with functional change and adverse effects. On the other hand, enzymes such as lactate dehydrogenase can be very variable between individual controls and between occasions in the same animal; it is quite possible that a twofold change in activity in the plasma would not be associated with toxicity; it also means that change due to treatment is much easier to see in electrolytes than in enzyme activities or other very variable parameters. EXPERIMENTAL NORMALITY In any toxicological experiment, it is vital that the test system should be as deﬁned as possible, always bearing in mind that it is a biological organism. For the most part this means the exclusion of any factor that might impede the experimental objective being achieved. In animal experiments, it is important to ensure that the animals are free from the effects that may be induced by disease or parasitic infection or poor husbandry practices, among numerous sources of abnormality. It should also be realized, however, that normality in a test system may not equate to normality in the wild-type organism, particularly in the case of bacteria. The Ames test is conducted with strains of Salmonella typhimurium that have had speciﬁc characteristics designed into them; deviation from these characteristics invalidates the test results. Equally, the laboratory rat may be said to be normal in laboratory terms, but is clearly not so in comparison with the wild rat from which it is derived. In an analogous manner to bacterial strains, there are strains of rat bred with speciﬁc abnormalities for purposes of metabolism investigation, for example, the Gunn rat or transgenic mice for investigation of speciﬁc toxicological mechanisms or for accelerated assessment of carcinogenicity.

42

A Guide to Practical Toxicology 2nd Edition

In a review of the role of environmental stress on the physiological responses to toxicants, Gordon (4) reiterated the ancient truth that toxic response is a function of the poison itself, the situation of exposure, and the subject exposed. It is the variability inherent in the third of these factors, which is a large factor in inﬂuencing the variation in experimental normality that may be seen in a group of animals. This variation may be due to the individual test animal or system or to factors that are external to the animal, principally, the environment in which it ﬁnds itself. Variation due to the biology of the test system is a function of the complexity and genetic diversity of the test system; an outbred mouse strain is inherently more variable than an inbred strain. Broadly speaking, nonhuman primates are more variable than dogs, which are more variable than rodents. Factors, which are external to the test system include husbandry (e.g., nutrition, housing, sanitation) and other environmental factors such as temperature and humidity. Gordon points out that the majority of toxicological experiments are conducted under conditions that are optimized to the well-being of that particular species. Thus, animals are housed in standard cages, in a standard temperature, and humidity range, with a 12-hour light/12-hour dark cycle and are offered standard diet and water. Sanitation and hygiene are carefully controlled to obviate infection. The animals are generally resting or get little exercise. From this, it is clear that a distinction should be drawn between wild-type normality and experimental normality. There are many factors that can affect the test system and so have direct or indirect effects on the responses to treatment with chemicals. This can be reﬂected in lack of reproducibility of data between laboratories or in data which mislead interpretation, particularly, if an abnormality common to the whole experimental population conceals a response to treatment that is present in a “normal” test system. Of these factors, one of the most difﬁcult to assess is stress. Although this refers particularly to animals, it should be noted that incorrect storage or preparation of in vitro test systems would also compromise the experiments undertaken. In animals a degree of stress is normal in everyday life, but this leaves the question as to what is a normal level of stress. Assessment of excessive stress is relatively easy, as the changes seen in comparison with an unstressed control are usually plain. Low-grade chronic stress and its effects are much more difﬁcult to distinguish and, as a result, it may be impossible to separate subtle effects of treatment from the effects of stress. Apart from stress due to the effects of treatment, stress may be incorporated into toxicity experiments through a number of different ways, particularly husbandry and environment, although these are clearly intimately related. Husbandry Aside from treatment itself, one of the most important sources of stress in animal studies is inappropriate husbandry. In general, the animals used in toxicological experiments are social and beneﬁt from housing in groups, which reduces stress and so produces a more normal animal. Studies of animals implanted with

Normality: Deﬁnition and Maintenance

43

telemetry devices that relay data on heart rate, blood pressure, or body temperature have shown that heart rate and blood pressure increase when cage mates are separated, when a new cage is provided, or when an unfamiliar person enters the room. Recently, the increasing practice of housing primates in groups, instead of in individual 1 m3 steel cages has shown the beneﬁts of attention to good husbandry technique. Individually, housed primates are likely to show atypical behavior, including self-mutilation and repetitive movements that can in no way be said to be normal. In gang-housed experiments the animals are housed together in single-sex treatment groups and have the opportunity to socialize and interact with each other; they are visibly more relaxed and outwardly normal. In a similar way, it is generally accepted that rats housed together are better models for toxicity experiments than singly housed animals. In minipigs, feeding is an unexpected source of changes in blood pressure and heart rate and these effects may persist for several hours after feeding. In fact the changes brought about by feeding are more extensive than those due to administration of doses. It has been found appropriate in some laboratories, therefore, to feed the animals in the evening so that the effects of feeding do not mask effects of treatment. One argument for single housing is that food consumption data are more precise; also, if an animal dies unexpectedly, there is no chance of cannibalization by cage mates. However, food consumption measurement may be hampered by bedding (preventing measurement of spillage) and better husbandry should reduce the number of unexpected deaths. In other species also, the beneﬁts of individual food consumption data of dubious accuracy or utility are outweighed by the advantages of group housing in providing a less stressed animal. For rodents, individual housing has the downside that the animals are subject to low-grade chronic stress, which has the potential to produce hypertrophy in the adrenal cortex with increased adrenal weight. In studies of up to 13 weeks, the adrenal changes are often accompanied by reductions in thymus weight, which may mask immunotoxic change, although stress itself can lead to immunosuppression. In longer studies with individually housed rats, the lifespan of the animals is somewhat shorter than with group housing and the animals tend to be more difﬁcult to handle and have a different tumour proﬁle. Group housing alleviates much of this stress; although dominant animals may have some countereffect on this, in the case of individual cage mates. However, some animals are better housed individually, usually due to ﬁghting, male mice and hamsters being two good examples of this. New studies are indicating, however, that male mice can be housed in groups if they are kept together from a very early age; this means allocating them to cages at delivery and then randomizing cages rather than animals. Environment While husbandry is clearly the progenitor of the environment in which the test system is kept, it is worth remembering that purely physical factors can have profound effects on a test system’s response to treatment. High temperature tends

44

A Guide to Practical Toxicology 2nd Edition

to exacerbate toxicity, which is exempliﬁed by LD50 values for some chemicals being notably higher at high temperature than at room temperature or lower. Other physical factors to consider, although they may have less impact, are relative humidity, the number of air changes (and whether it is ﬁltered), and less obvious aspects such as noise. Do rats enjoy heavy metal music or do they prefer Sinatra? Another factor increasingly used in animal experiments is environmental enrichment, where toys are provided or activities such as foraging, are encouraged. Although group or pair housing is good environmental enrichment in itself, provision of cage furniture for dogs and primates or cardboard cage inserts for rodents are also used increasingly. For primates, the use of small bits of food hidden in the bedding or a honey and seed mixture smeared on wooden perches is a very good way of promoting behavioral patterns that are closer to normality. Other Sources of Stress While husbandry is a potential source of continuous low-grade stress, other causes of stress may be transient. These include handling, treatment (or the prospect of treatment), irregular examinations such as recording of electrocardiograms, blood or urine collection, or simply removal from the home cage for examination. While stress is generally accepted as being an important factor to avoid in toxicological experiments, its effects are inherently difﬁcult to quantify, as the investigation is itself often stressful and reaction to stress, especially hormonal, can be very rapid. Experimental design and conduct should be optimized to reduce stress as far as possible. Stress reduction can start with the choice of study personnel. In studies with animals, the choice of people who will carry out the majority of the handling and procedures is very important because their attitude and approach will affect the behavior of the animals. A relaxed, caring technician will have animals that are themselves relaxed and easy to handle, while the opposite is true for those who are impatient or bad tempered. In routine toxicity studies with dogs or primates, it is usual to record electrocardiograms from unanesthetized animals. Unless the animals are thoroughly acclimatized to the procedure, heart rate will be signiﬁcantly increased above normal values, along with blood pressure; careful handling of the animals is vital to minimize stress. Procedure-related effects can conceal reductions in blood pressure and smaller increases in heart rate that can result in histopathological lesions in the heart, an effect to which the papillary muscle of the laboratory beagle dog is known to be sensitive. Although it is possible to perform these measurements on anesthetized animals, the choice of anesthetic is important as it too can affect blood pressure or heart rate. To avoid such experimentally induced abnormality and to track real changes in this type of parameter, it is advisable to use telemetric equipment which gives a remote reading of these data in an unrestrained animal and indication of change from “true” normality. It may also be useful to draw a distinction between psychological and biochemical or physiological stress, the latter two being more likely to be treatmentinduced in a well-designed experiment. Poor protocol design can be a source

Normality: Deﬁnition and Maintenance

45

of unwarranted stress, especially when an excessive blood-sampling regimen is pursued, producing a marginal anaemia that may itself make the animal more susceptible to the toxicity of the test substance. Other Sources of Experimental Variation The distribution of animals in the treatment room is also worth considering so as to avoid minor environmental differences that may become signiﬁcant in longer studies. In this respect, rodents on the top row of cage racking can show ocular abnormalities due to greater levels of light in that position, relative to the lower rows, which are inevitably more shaded. Incautious distribution of controls or treated groups can produce an uneven distribution of ocular changes, which may be misinterpreted as treatment-related. The source from which animals are obtained is also important. In terms of continuity and comparability of historical control ranges, a consistent supplier for each species should be used wherever possible. Signiﬁcant differences were apparent between wild-caught primates and those bred in captivity in special facilities. The wild-caught animals were of unknown age, except in general terms, and were of unknown medical history, especially with respect to parasitic infections. The results of this included behavioral abnormalities and preexisting histopathological lesions, which could confound interpretation of the study ﬁndings. These problems have been largely circumvented by the use of captive breeding, which produces an animal that is notably more relaxed and which, with group housing, is much easier to work with. Husbandry practices at dog breeders have also improved, with people employed to familiarize the animals with handling and interaction with technicians; this also produces a more relaxed animal that is easier to work with and, possibly, also safer. PROTOCOL DESIGN AND PROCEDURE AS SOURCES OF ABNORMALITY Much of the above refers to abnormalities that may be present in the test system before the study starts or is present as a function of test facility management. However, it is also possible to introduce abnormality into the study by poor protocol design. Taking samples, for toxicokinetic determinations, from dogs and primates is often performed only on treated animals or to a much lesser extent in the controls. For this reason, it is vital that samples for clinical pathology are collected before the toxicokinetic samples. The extensive sampling normally associated with collection of samples for toxicokinetic may induce a marginal anaemia, which will be more apparent in treated animals than in the controls, which were sampled less extensively than treated animals. This can give a false impression of a treatment-related effect. The order and time of day at which investigations are undertaken must be consistent, in order to ensure that diurnal variations are discounted. It may be useful to consider large studies as a number of replicates, with equal numbers from each treatment group in each replicate; this

46

A Guide to Practical Toxicology 2nd Edition

helps to ensure that the investigations are evenly spaced across the groups and that the variation between replicates is accounted for. CONTROL GROUPS AS NORMALITY The contemporary control or untreated test system is always assumed to represent the experimental standard of normality from which treatment-related deviation may be assessed. However, the group sizes in toxicity experiments are usually quite small, and in a typical rat study, a control group of 10 males would typically be randomly allocated from a group of about 45 males, allowing ﬁve animals as replacements, the remaining animals going to the treatment groups. Within the four groups, it is quite possible to have differences in various parameters that are statistically signiﬁcant before the effects of treatment are added; this level of difference tends to increase as the diversity or heterogeneity of the original population increases. To assess the normality of the control group, their data may be compared with those from similar groups from other studies conducted in the same facility. This gives a valuable check that the controls have behaved in a similar manner to those on previous studies (i.e., that the controls of the current study are producing data that are in line with expectation). This type of check is routine for in vitro studies, particularly for positive control groups, and in reproductive studies, where the incidences of rare variants or malformations is a critical factor in determining the relevance of any differences seen from the contemporary control. These checks involve the maintenance and use of historical control data, which are discussed in detail below. A protocol or experimental plan deﬁnes the endpoints or parameters to be examined and, therefore, deﬁnes the areas in which the controls must be normal. However, it should be appreciated that normality in scheduled parameters does not necessarily imply normality in others. In other words, the test system should be normal in all respects in order to be valid for that experiment. For the majority of experiments, it is necessary to have a control group because of the relatively small differences that may be seen and also to facilitate the evaluation of dose–response curves, and the presence of a no-observed-effect level. However, it may not be necessary to have controls where the change from normality is expected to be large or clearly evident, as in dose range-ﬁnding studies early in an experimental program. The control group becomes essential in longer studies where “experimental normality” can drift as the study progresses. Longer may be a relative term, as this can apply in vitro, especially with primary cell cultures, as well as in animals. Such change with time is seen typically with the plasma activity of alkaline phosphatase (ALP), which decreases with age. Increases in ALP activity in the plasma are seen with some compounds that affect the liver, and when these increases are small they can be countered by the normal decrease in ALP activity, leaving the enzyme activity essentially unchanged from the previous examination. This lack of change, seen in treated animals, is an effect of treatment even though the ALP activity in

Normality: Deﬁnition and Maintenance

47

those animals has not risen; the controls should show the expected decrease in activity. In studies in which there is a statistically viable group size, it is not normally necessary to collect data before treatment, with the exception of noninvasive data such as bodyweight or food consumption. This is because the number of animals in each group allows a sensible statistical comparison to be made with the controls. Where the group size is smaller, usually seen in studies with dogs, nonhuman primates, or in vitro studies, the scope for statistical analysis is greatly reduced because statistical power is affected by the sample size. In studies in vitro, it is normal to compare the contemporary control against expectation as contained in the historical control ranges for the testing laboratory. In animal studies using dogs or nonhuman primates, it is usual to collect data before treatment begins to indicate the baseline data for individual animals; these also act as a health check and individuals with abnormal results can be excluded or treated as appropriate. These data provide a within-animal control that, when evaluating data collected during the treatment period, can be used with the contemporary control data in a dual comparison to indicated treatment-related changes. Equally, change in the control groups in some parameters from one examination to the next may be contrasted with the absence of change in treated groups, thereby allowing the difference from controls to be interpreted appropriately. Carcinogenicity bioassays frequently have two control groups, allowing separate comparisons with treated groups to be made. If the high-dose group shows a difference from one control group but not the other, the difference may be dismissed as unrelated to treatment. Inevitably, there will be occasions when individual control cultures or animals show results that are clearly abnormal, either high or low; such results that lie grossly outside normal ranges are also occasionally seen in treated individuals at any treatment level. Examples of such deviation from expectation might include high colony counts in vitro in untreated controls or lack of response in positive control groups in bacterial mutagenicity tests or markedly high activities for single enzymes in the plasma of individual rodents. Some strains of rat are prone to early kidney failure, which is seen in controls and may be exacerbated or accelerated by treatment in test groups. In untreated controls, it is obvious that the result has arisen by chance; where the individual is treated such dismissal is more difﬁcult, but can be achieved by reference to other data from that individual and to other members of the group, or by the absence of dose response. In some animal experiments, it is normal to use the animal as its own control. This is true for experiments where individual data are collected before treatment, but is a much more signiﬁcant factor in some short-term tests. In studies, such as skin sensitization in guinea pigs, the Mouse Ear Swelling Test, or in irritation studies, an untreated area of skin or the untreated ear or eye is assessed. This use of within-animal control data is based on the assumption that the chemical administered will not enter the systemic circulation and that all effects are therefore conﬁned to the site of administration.

48

A Guide to Practical Toxicology 2nd Edition

ESTABLISHING AND MAINTAINING NORMALITY IN EXPERIMENTAL GROUPS An experiment has been planned and the test system has been delivered, prepared, or taken from the freezer. As a ﬁrst step it may be assumed, initially at least, that the population of cells, bacteria, or animals that has been provided for the experiment is itself normal. However, some degree of heterogeneity in this population must be assumed and a commensurate degree of heterogeneity of response must be expected from the individuals. Before the experimental variable of treatment can be applied, it is necessary to distribute any inherent variability in the individuals of the test system evenly among the groups, in order to avoid experimental bias that may be seen as spurious differences between treatment groups. With cellular systems, the stock culture may be mixed and subsampled to provide the cultures for the different control and treated groups, a process made more valid by the huge numbers of cells that are involved. With animals it is slightly more difﬁcult because of the smaller numbers and the greater extent of genetic diversity that is to be expected. There are several methods available for random allocation of animals to treatment groups, which will achieve this even distribution. Usually, the animals are allocated to treatment group by using a stratiﬁed bodyweight approach, where the animals are listed by bodyweight and divided into as many ranges as there are treatment groups. Animals are then assigned in sequence to groups, according to a rotation that ensures that an even number of animals from each range is assigned to each group. This is appropriate for smaller numbers of animals, especially when they are large, and usually give treatment groups with similar group mean bodyweights. An alternative is simply to allocate them randomly to treatment groups as they are removed from their travel boxes or from stock cages. In either case, it may be necessary to adjust the distribution subsequently to remove any variation that becomes obvious during the period before the start of treatment or exposure to the test chemical. In some studies, especially those with large animals or in reproductive studies, it is important to ensure that litter mates are not grouped together, to avoid any genetic bias that may be introduced to a single group. Where a speciﬁc parameter is considered of importance, it is good practice to examine it before treatment starts and to randomly allocate the animals to the treatment groups using these data. Use of pretreatment cholesterol or triglyceride values as the basis for allocation to groups would be appropriate for a drug expected to affect plasma lipid concentrations, for example. The intention and overall result is to produce the correct number of treatment groups that are as similar as possible before treatment begins, in particular that the control groups are comparable with the groups destined for treatment. Having completed the process of random allocation to groups or treatment, it is now necessary to ensure that the various groups remain comparable to each other, at least until treatment is applied. The groups also have to be comparable to previous control groups from similar experiments to allow comparison when necessary. For most test systems, but particularly for animals, an acclimatization

Normality: Deﬁnition and Maintenance

49

period is necessary to acclimatize them to the laboratory environment. For cell cultures, this may mean that they are allowed to go through a few cycles of divisions to check for viability. For animals, a period of between 1 and 4 or more weeks is allowed; the former for rodents, the latter for larger animals such as dogs. This allows them to settle after transport to the testing laboratory and to become accustomed to the new procedures or cage mates. It is during this period that health checks are performed and the distribution among the groups is conﬁrmed. The importance of husbandry for test systems has already been mentioned, and it is important that standards of husbandry should not change during experiments, especially short ones. In some cases, it is necessary to change housing but this should not be undertaken lightly as the animals will be subject to stress as a result, and this may affect their responses to the test compound. It makes sense to avoid cage changes around the time of critical investigations on the study. In animal studies, one of the most important factors to consider is the diet offered. The aim is to provide a diet that is well balanced and nutritious without compromising health. Correct nutrition has a critical role in toxicology; low-protein diets are known to affect metabolic capability and may increase the toxicity of directly toxic chemicals and decrease the effects of chemicals that require metabolism. Diets have been formulated traditionally, to maximize growth and reproductive performance. However, a high-protein diet is not suited to mature rats and gives a different tumour proﬁle in comparison with low-protein diets. In fact, the growth of tumours may be enhanced by high levels of fat and protein. Conversely, the presence of antioxidants and trace elements can decrease tumour growth. There has been gradual realization that high-protein diets can be responsible for excessive weight gain and adverse tumour proﬁles and poor survival, which has resulted in the use of low-protein diets or dietary restriction. The problem here is that a low-protein diet may not be appropriate for a growing animal. The apparently logical choice of changing from a high-protein to low-protein diet at the end of the growth phase is fraught with difﬁculty, as this might affect the absorption of the test chemical and lead to increased or decreased exposure levels. Equally, the use of dietary restriction to reduce weight gain, for instance, by offering food for 2 hr/day, means that the animals soon learn to eat only at that time of day. As a result the food intake is not signiﬁcantly reduced in comparison with studies, where diet is freely available. Also, the practical considerations of giving and removing food each day adds to the study workload and increases costs. These factors are of particular concern in rodent studies, especially long ones, but are less of a problem with dogs, which are generally given a set amount each day. In any study there is a general preference for using the same batch of diet throughout; in any case, the batches offered should be known. It should be understood, however, that changing the diet offered or the feeding regimen will have a knock-on effect on the historical control ranges, which will take some time to re-establish. When studies are performed by mixing the test material in the diet, care must be taken that the inclusion levels do not affect the nutritional value of the diet. This is particularly difﬁcult to achieve when testing novel foods; studies with

50

A Guide to Practical Toxicology 2nd Edition

genetically modiﬁed potatoes used dietary inclusion levels of potato that have been associated with pathological ﬁndings in the intestine. The presence of these changes was wrongly attributed to the genetic modiﬁcation of the potato. These various comments may also apply to consistency of media used for in vitro work, although, as these are largely synthetic, the overall signiﬁcance may not be so great. Changing media routinely used in a particular type of in vitro study may be expected to change the response of the test system and will require the establishment of new historical control ranges. One of the aims of study conduct should be to maintain consistency of design from one study to the next in order to obtain control data that may be referenced to the historical control ranges of the laboratory. This allows the performance of the controls to be measured against expectation at the laboratory and facilitates an answer to the question ‘Are the controls normal?’ The establishment and use of these historical control ranges or background data is a critical part of laboratory management. BASELINE DATA AND HISTORICAL CONTROLS In any scientiﬁc experiment, as many variables as possible are controlled in order to assess the truth or otherwise of the test hypothesis. The use of concurrent controls gives a baseline against which change in treated groups can be measured; they become the experimental deﬁnition of normality for that experiment. Within this narrow deﬁnition it is possible for each experiment in a series to stand alone, providing that controls remain valid as comparators for their test group or groups. However, when it becomes necessary to compare results across a series of experiments, it is important that the control groups are comparable historically with each other; otherwise, deviation from expected control values in one experiment cannot be assessed with any conﬁdence. In toxicology, as in most scientiﬁc disciplines, the presence of a suitable control group, or groups, allows a judgment to be made as to the presence or absence of a treatment-related effect. It is possible, however, for control groups to provide data that are not consistent with normal expectation in the testing laboratory and to give results that are not consistent with previous experience. Even with the large, randomly allocated, double control groups typically used in carcinogenicity bioassays, each of 50 animals of each sex, it is possible to see statistically signiﬁcant differences between the two control groups, especially in bodyweight or food consumption. It is therefore important to have a database of historical control data that will allow an assessment of the normality of the controls, particularly when group size is small. Uses for Historical Control Data Historical control data can be used to answer questions on the control data or on the deviation of treated group data from expectation, if the concurrent control is in

Normality: Deﬁnition and Maintenance

51

some way inappropriate, for example, if the data are unexpectedly low. Equally, they can be used to show that the occasional outlying result in treated groups is within the expected range of values. They are particularly important in tests such as those for mutagenicity, when they are used to check that the controls have produced the expected number of colonies or that the positive controls have shown a signiﬁcant increase over untreated control values. In reproductive studies, they are used routinely to compare the incidences of rare malformations with normal incidences in previous control groups. If part of a study is ﬁnished earlier than the concurrent controls, it is possible (although tricky) to use historical control data to assess any treatment-related changes in the “uncontrolled” test group. This type of assessment is best when gross change from expectation is sought, as subtle changes cannot be conﬁdently assessed in these circumstances. Changes in these cases can be assessed against presence or absence of similar change in groups that complete the treatment or exposure period. Types of Historical Control Data It is important to consider the data type before trying to set up historical control data bases, as some data are not appropriate for this treatment. Data that are suitable are objectively derived and are typically for continuously variable parameters or are incidence data for ﬁndings that are present or absent. The numeric type includes colony counts, mitotic index, clinical pathology parameters, bodyweight, and similar measurements. Incidence data are typically for reproductive malformations or variants and tumours. Subjective data—those that require some judgment to grade—are not generally suitable for historical control data. Non-neoplastic pathology ﬁndings are a good example of this because of their presence in a number of severity grades, which are dependent on the judgment of the individual pathologist. The inconsistency of nomenclature between pathologists and with passing time is just another aspect of this. In rats, a limited degree of basophilic tubules may be normal in the kidney but, because of the probability of different interpretation and grading between pathologists, it is not generally possible to assign a numeric value that would be consistent from one study to the next. With tumour data, it is much simpler because the animal either has a tumour or it does not (always allowing for pathological disputes about what constitutes a tumour, for instance, with hepatic foci and adenomas). It is also impossible to have background data for clinical signs, especially those that are largely subjective such as hypoactivity or the extent of thinning of background lawn in the Ames test. Deﬁning a Normal Range In deﬁning normal values, the most important characteristic to be determined is the mean of the control values for the parameter in question. However, this single ﬁgure does not indicate by itself the extent of the variability of the data about that mean. While a range, minimum and maximum, will give some indication of

A Guide to Practical Toxicology 2nd Edition

52

that variability, it is usual to apply 95% conﬁdence limits to the data and give the mean ±1.96 standard deviations, which excludes any outliers at the extremes. This gives reasonable conﬁdence that 95% of values will be inside the normal range and also indicates the inherent variability of the parameter. However, this basic approach does not take account of the variable sample size for the different parameters, which is typical of historical control databases. Thus, a commonly measured enzyme such as alanine aminotransferase activity may have 200 or more values, while a less common enzyme such as sorbitol dehydrogenase may only have 30. In this case, the use of the simple mean ±2 standard deviations may give a false impression of security for the lower sample size. To take account of this, it is possible to use a formula that takes account of the sample size by applying degrees of freedom. The lower and upper limits of a normal range may be calculated from individual values using the following formula: Mean − (tn−1 × SD) to mean + (tn−1 × SD), where tn−1 is the value of t for the number of samples (n) less one degree of freedom and SD is the standard deviation. This takes the number of data points into account and gives a statistically more secure value. An important assumption in this is that the data follow a normal distribution. When such a range has been calculated, the data reported for that parameter should include the number of samples (n), the mean, and the calculated normal range and the actual range of values. All these values indicate the reliability of the ﬁgures generated; a normal range quoted from 30 values of an inherently variable parameter, for instance, an enzyme activity, will be less reliable than from a similar population of a consistent parameter, such as plasma sodium concentration. A vital aspect of normal range deﬁnition is the origin of the data contained in relation to what they are being compared with. For valid comparisons to be made, the control groups have to be as similar as possible and, if the experiment is in any signiﬁcant way atypical, its control data should not be included in the historical control ranges for the laboratory. Drift in Historical Control Ranges With any biological organism some drift in normality is to be expected. With humans, the normal height of the general population has increased signiﬁcantly since medieval times, and the health proﬁle of the population has also changed as diet, medical knowledge, patient care, and a host of other factors have improved. In toxicological test systems, reasons for drift or evolution in historical control values include change in genetics, storage or husbandry, culture media or diet, environmental factors, and subtle variations in methodology. It is unusual to be able to pinpoint a precise cause for such drift, as various factors tend to interact to produce values that may be far from expectation, leading to historical control subsamples that may not be consistent with the rest of the data.

Normality: Deﬁnition and Maintenance

53

Suppliers have huge inﬂuence over historical control data through the pressure to select for particular characteristics in cell lines or animals that have large litters; these animals tend to be larger and to grow more quickly, which may be associated with earlier sexual maturity. In the late 1980s, it was noted that some strains of rat were eating more and gaining more weight than previously. This had the effect of reducing survival in long-term studies below 50% at two years—the magic cut-off ﬁgure produced by regulatory authorities to deﬁne an “acceptable” carcinogenicity bioassay. This was due in part to unexplained deaths but also to increases in renal disease and increased incidences of mammary and pituitary tumours. The weights of some organs had also increased over previous historical controls (5). Drift, which may be due to supplier inﬂuences, has also been important in the historical control data seen with reproductive studies in foetuses of rats and rabbits. A good example of this is the reduction in the number of extra ribs seen in some rat strains from more than 20% of foetuses to fewer than 5% in a 5-year period at one laboratory. Litter size has tended to increase in line with breeder pressures, and this may be expected to inﬂuence the historical background incidences of study ﬁndings, quite apart from the expected reductions in fetal weights. Another source of drift can be in the diagnostic criteria and nomenclature, used by pathologists in evaluating the study tissues, especially in carcinogenicity studies. To a large extent this is an artefact, and comparison of tumour rates between laboratories is also made more complex by differences in these factors. The consequence of this variability is that it is necessary to update historical control ranges at regular intervals to ensure that they stay relevant to contemporary studies. The best way of achieving this is to use a data capture system, which has the facility to take control values from suitable studies for recent historical control data and from which studies are excluded as needed. Selection of studies for inclusion needs some care to avoid data bias.

How Many Data Points? The number of data points needed, to give a viable historical control database for any one parameter, is dependent on the data type and the inherent variability of the parameter in question. For a continuously variable parameter with low variability, a smaller number of points will be adequate than with a highly variable parameter. Although it may be feasible to deﬁne the number of values necessary for statistical security in the light of the variability in a parameter, it may not actually be sensible to do so. The reason for this is that all too frequently the smaller data sets relate to rarely examined parameters, particularly enzymes, and in these cases any historical control data may be a bonus and cannot be ignored. The weakness of the comparison has to be taken into account in the interpretation, and it may become necessary to refer to similar data from dissimilar studies or from other laboratories.

A Guide to Practical Toxicology 2nd Edition

54

Table 1 Probability of a Given Sample of Animals Containing At Least One Case for Different Background Incidence Levels True population incidence level (%) Sample size

2

5

10

20

40

10 20 30 50

0.183 0.333 0.455 0.636

0.402 0.642 0.786 0.923

0.652 0.879 0.958 0.995

0.893 0.989 0.999 1.0

0.994 1.0 1.0 1.0

Source: Adapted from Ref. 6.

For incidence data, Tables 1 and 2 (6) give some indication of the sample sizes needed for a viable comparison. In this case, which is typical for tumour incidence data in carcinogenicity bioassays, the more data available the better the security of the conclusions drawn from them. The principal caveat is that they should be recent data, as some drift in tumour incidence may be expected with time. The minimum incidence of a tumour that is possible in a treated group in a standard carcinogenicity bioassay is 2% or one animal in 50. However, although the control groups in modern carcinogenicity bioassays are typically of 100 animals (in two groups of 50) for each sex, this does not necessarily give enough statistical sensitivity to dismiss a single tumour as incidental. This is because a control group of this size is only likely to show a tumour with a minimum incidence of between 3% and 4%. The implication of the data in the tables, especially Table 2, is that to assign a tumour found in one treated animal to incidental causes, a historical database of a minimum of 200 animals would be desirable; in practice, it is much larger than this. With tumours, the statistical device of combining males and females, which would give a control group of 200 animals, is only viable when there is no sex-related bias in incidence. This is clearly not the case for prostate, testicular, mammary, or other sex-speciﬁc tumours and cannot even be applied to liver tumours due to sex-related differences in metabolism. For analysis of rare tumours, it may be necessary to resort to outside sources of historical control incidences, which are likely to be larger, although more diverse in origin and derived from different study designs. Table 2 Maximum Background Incidence That

Would Yield a Zero Result in a Sample (P ⬍ 0.05)

Sample size (n) Background Incidence (%) Source: Adapted from Ref. 6.

5 45

10 26

15 18

20 14

50 6

Normality: Deﬁnition and Maintenance

55

Reproductive toxicity studies provide similar problems, and it is likely that a minimum of 50 litters would be needed to give a secure historical control database. The litter is the unit of evaluation in reproductive studies and the number of individual pups is less signiﬁcant. For numerical data, such as clinical pathology or colony counts, 100 data points may be acceptable for an evenly distributed parameter with limited variability between individuals. For parameters where the variance about the mean is lower, for instance, electrolyte concentrations in plasma, a smaller number may be acceptable. Where the parameter is highly variable among individuals and, in some cases, among occasions of examination, as for alkaline phosphatase activity in the plasma, it is desirable to have a much larger data set for comparison. Transferability of Normality—Data from Other Laboratories In the same way that the contemporary control data is the best estimate of normality for any particular experiment, control data generated in similar experiments at the same laboratory are the best source of historical control data. However, there are occasions when the in-house experience is insufﬁcient for conﬁdent interpretation of the results. This is so for parameters that are not frequently measured, or when it becomes necessary to compare in-house data with those from outside, in order to verify correct performance of the test. It also becomes necessary when a laboratory changes location or a new animal facility is opened; this is especially true for reproductive data. There is a number of factors that work against this, however, including differing environmental factors such as diet or noise, differences in analytical technique or instrumentation, and pathological nomenclature. Despite these challenges, data from other laboratories are frequently better than nothing at all. The criteria for deciding the relevance of data from other laboratories for purposes of historical control use are the same as for in-house data, as discussed below. The greater lack of comparability of such data with those produced in-house must not be forgotten in the process of interpretation. This is illustrated by data published for control groups from a number of studies using Charles River rats and mice (7–9). (Note: There are sources in the literature for other parameters such as those of clinical chemistry or haematology, however, these are probably less useful than tumour incidences and may well be subject to undeﬁned methodological differences, rendering them essentially useless. Animal suppliers should have background data on their web sites, especially for parameters such as growth and food consumption or specialist data such as glucose concentrations in diabetic models.) Criteria for Comparison of Historical Controls The following list uses a fairly arbitrary order to indicate the importance of the individual factors that need to be considered in deciding how much one set of data is comparable with another. The comparability of the data sets will increase as the number of similarities from the listings below increases.

56

A Guide to Practical Toxicology 2nd Edition

r Species and strain or derivation of culture or test system: Use of the same species is clearly essential but different strains of mouse or rat, as with strains of S. typhimurium or E. coli, have their own characteristics, which signiﬁcantly inﬂuence the values for their various parameters. This distinction extends to primary or secondary cell cultures derived from animals; for strict comparability they should be from the same strain, similarly treated or derived from the same original culture source. Hepatocytes from rats pretreated with Aroclor 1254 (now more rarely used) will probably not be the same as those from pentobarbitone-treated animals. r Experimental protocol: The procedures used in producing the data must be as similar as possible, extending to culture methods, husbandry, treatment or exposure period, and data collection methods. Where the protocol delineates the criteria for data collection, it is critical that data from similar protocols are compared as small shifts in deﬁnition can produce large differences in incidence. This is particularly relevant in epidemiological toxicology and may be an Achilles’ heel for future evaluation of records collected under COSHH regulations. Data collected from restrained animals may well differ signiﬁcantly from those collected by telemetry, for example, heart rate and blood pressure. r Age of the test systems must be comparable: There are a signiﬁcant number of parameters that change with age. In primary cultures of hepatocytes, metabolic capability declines over a period of hours so that data from a fresh culture may be radically different from those given by older cells. In animals, the most obvious change with age is seen in bodyweight but other parameters move in concert with this. In the plasma, alkaline phosphatase activity reduces as the growth phase slows and the bone-derived isoenzyme becomes less important. Renal function in older animals is signiﬁcantly lower than in the young, and this may inﬂuence response to toxins through slower clearance and possible changes in the importance of metabolic pathways. In addition, greater variability among individuals is a characteristic of old age. r Dose route or method of exposure: Although this is less important in vitro, there is still scope for signiﬁcant difference, as with exposure in the vapor phase or in a solvent such as DMSO. In animals, ADME and toxicity following the various routes of administration can be very different. There may also be effects on parameters due to the procedure itself; muscle damage at the site of injection can be associated with increased release of enzyme markers of muscle damage into the plasma; e.g., creatine kinase, lactate dehydrogenase, and aspartate aminotransferase. Such damage may be due to the vehicle used in the formulation. r Vehicle or culture media: As compounds seem to have become more difﬁcult to formulate, there has been a trend toward more exotic vehicles in an attempt to enhance bioavailability. A signiﬁcant number of excipients used in formulations, such as suspending agents and, particularly, solubilizing or wetting agents such as polysorbates (e.g., Tween 80), have their own toxicity,

Normality: Deﬁnition and Maintenance

r

r

r

r

57

which complicates comparisons between them. In addition, formulation differences, in terms of percentage content of individual agents give an extra layer of uncertainty. Same source or supplier of test system: The importance of environmental factors and genetic differences between suppliers may have effects that are determined by the inherent stability of test systems. Data from test systems that are not genetically homogeneous will tend to vary least among suppliers, in part due to the inherent variation among individuals in such species. Similar environmental and housing conditions: These include factors such as stocking density, breeding, or culture procedures, etc. Housing and stocking densities, which affect stress levels, can have wide-ranging effects, including effects on tumour proﬁle. Changes in husbandry practices, for instance, to exclude or reduce disease, have far reaching effects on animals; this has been seen with rabbits where changes in housing conditions greatly reduced the mortality seen in older facilities. Similarity of data recording: Occasionally, new procedures or personnel can lead to a new observation that has been present before but simply missed due to lack of observation at the critical time or because the personnel or method of observation changes. The overall quality of data is also a factor but is one that cannot be readily established from tables in isolation. Laboratory instrumentation and analytical procedures: This is an important factor to consider (but not always available) when comparing analytical data from different laboratories. It may be a factor in published differences in the plasma activity of alanine aminotransferase in marmosets from different laboratories. Change from manual or visual data collection, for example, differential cell counts, to instrumental methods can produce large changes in incidences. Inception of new analytical kits or data treatments can likewise have signiﬁcant effects that make it impossible to compare early data with new.

At some point, the decision must be made as to whether the historical control database offers sufﬁcient comparability with the experimental controls to make a meaningful contribution to the interpretation of the results. If a signiﬁcant number of the factors given above are not matched, it would probably be better to rely on the experimental controls rather than to use historical control data of dubious similarity.

REFERENCES 1. Fermini B, Fossa AA. The impact of drug-induced QT interval prolongation on drug discovery and development. Nature Rev Drug Discov 2003; 2:439–447. 2. Heath D. An Introduction to Experimental Design and Statistics for Biologists. London: Taylor and Francis, 2000. 3. Woolley A. A Guide to Practical Toxicology, 1st ed. London: Taylor and Francis, 2003

58

A Guide to Practical Toxicology 2nd Edition

4. Gordon CJ. Role of environmental stress in the physiological response to chemical toxicants. Environ Res 2003; 92:1–7. 5. Nohynek GJ et al. Fat frail and dying young: Survival, bodyweight, and pathology of the Charles River Sprague–Dawley-derived rat prior to and since the introduction of the VAF variant in 1988. Human Exp Toxicol 1993; 12:87–98. 6. Glaister JR. Principles of Toxicological Pathology. London: Taylor and Francis, 1986. R (ICR)BR 7. Giknis MLA, Clifford CB. Spontaneous neoplastic lesions in the Crl: CD-1 mouse. Charles River Laboratories, Tewksbury, MA, 2000. 8. Charles River on-line literature. Spontaeous neoplastic lesions in the B6C3F1/CrlBR mouse. 1989. Available at www.criver.com. R 9. Charles River on-line literature. Spontaeous neoplastic lesions in the CDF (F344)/CrlBR rat. 1990. Available at www.criver.com.

3 Determination of Toxicity: The Basic Principles

The following chapters examine the various areas of toxicity investigation that are routinely undertaken in a development program starting with a review of basic principles. A short chapter on in vitro systems is followed by chapters covering the main areas of regulatory toxicology, namely general and reproductive toxicity, genotoxicity, carcinogenicity, and dermal toxicity. There is also a brief chapter on environmental toxicology, the intention being to give a complete picture of toxicological investigation without going into detail in these specialist areas. This chapter sets out the basic concepts that need to be considered in the conduct of any toxicological experiment, including a review of regulatory inﬂuences, especially Good Laboratory Practices (GLPs).

CIRCUMSTANCES OF TOXICITY TESTING Nothing in this world is without toxicity of some kind. Investigations to determine the extent or seriousness of toxicity are undertaken for a number of different reasons and with various objectives in mind, often with evaluation of risk for human use or extent of exposure as an ultimate goal. The endpoint of such investigation can be precise, as in attempting to clarify the relationship between an effect and exposure to the test substance or to elucidate mechanisms of toxicity. Very frequently there is no such readily deﬁnable endpoint, merely the broad question—how toxic is this substance? The answer to this question may well be used to predict effects in humans and to assess safe dose levels (drugs) or amounts to which people may be exposed (acceptable daily intakes, benchmark, or 59

60

A Guide to Practical Toxicology 2nd Edition

reference dose) without adverse effect (pesticides, food additives, or chemicals at work). In terms of studies needed before release of a substance intended for public use or leading to human exposure, the investigations of a chemical’s safety fall into two phases and, broadly, two types. The ﬁrst set of investigations addresses two objectives, the ﬁrst of which is to identify intrinsic hazard in the test chemical and the second to estimate where and when that hazard may be manifested. The purpose of the second type of investigation is to conﬁrm the predictions arising out of the ﬁrst set in the real world. In other words, before release to the public, the ﬁrst step is to predict and suggest ways of controlling or preventing effects or events that might require investigation. In the second step, epidemiological or marketing vigilance studies are undertaken after distribution of the chemical has started, to ensure that hazards to human health or the environment have been correctly predicted and assessed. The ﬁrst set of studies is undertaken in a laboratory environment and the second conducted in the “ﬁeld” in patients, consumers, or in the environment. Before a marketing authorization for sale to the public is granted, the testing of a chemical falls into the category of safety evaluation. The extent of such testing and the type of study conducted are closely regulated by government guidelines. Compliance with these guidelines is not optional; it is also a general proviso that the studies be conducted according to the scientiﬁc needs of the particular chemical under evaluation. Once sales of a chemical—be it a drug, a pesticide, a cosmetic, or an industrial reagent-–have started and signiﬁcant public exposure has occurred, it is possible for untoward and unpredicted effects to be detected that may be associated with the chemical. It is popular in this increasingly litigious society to suggest that any abnormality in a population is attributable to chemical exposure, for instance, to local use of agrochemicals. These effects become the subject of epidemiological investigation that is intended to establish a link, or otherwise, between the chemical and the effect. With drugs, for which the dose is given and the patient history and comedication are known and for which the exposed population is easily deﬁned, such investigations are relatively simple. For low-level exposures to pesticides where the dose is unknown or only roughly estimated, and for which there are numerous other exposures to contend with, certain establishment of a relationship between effect and the chemical is much more difﬁcult. In both the cases, once a relationship has been proven, speciﬁc mechanistic studies can be undertaken to show exactly how the substance exerts its toxicity and, in some cases, under which circumstances it has its undesired effect. In order to bring a new chemical to the market place, it is necessary to design a program of investigation according to complex sets of regulatory guidelines speciﬁc to the area of use of the chemical. Although the studies prescribed for each class of chemical may be different in type or duration, they are all conducted to the same basic set of principles or protocol. In essence, these are to deﬁne an objective, choose a test system, and design and conduct a study according to

Determination of Toxicity: The Basic Principles

61

a predetermined protocol, having a set of investigations and endpoints that are chosen to meet the objective. The evaluation of speciﬁc classes of chemicals is covered in chapter 17. EFFECTS SOUGHT IN TOXICITY STUDIES It is an inherent handicap of toxicity measurement that programs of evaluation are necessarily designed to detect historically known effects, especially, where a particular change is expected due to prior knowledge of similar chemicals. Unexpected and, therefore, generally unwanted effects may be found during the course of routine toxicity investigations and are then subject to mechanistic investigations to assess their relevance to humans. Occasionally, unpredicted effects are found in patients or consumers after marketing has started, e. g., cardiac arrythmias seen with the gastrointestinal drug cisapride, which were due to prolongation of the heart rhythm, the QT interval, in some patients. This has induced a general examination of new drug candidates for effects on QT interval prolongation in safety evaluation programs. Such triggers for additional investigations are relatively frequent, adding to the guidelines for the range of tests that must be conducted before marketing is authorized. The classic example of a new previously unconsidered effect was that of thalidomide, in which serious reproductive effects were found. The thalidomide disaster had an enormous inﬂuence on the practice of toxicity testing and safety evaluation, ultimately leading to a rigid framework of investigative studies but also encouraging a conservative response to toxicological innovation that is still with us. One of the objectives of premarketing toxicity evaluation must be to search for mechanisms of possible epidemiological concern. It is relatively straightforward to identify severe effects, such as acute renal toxicity, but much more challenging to ﬁnd or predict the minimal effect that may accumulate in human subjects over years or a lifetime and lead to insidiously progressive renal failure. The longest study routinely conducted in evaluation of medicines is the carcinogenicity bioassay in mice or rats, over the majority of the lifespan of the chosen species. These studies are primarily designed to evaluate the potential for tumour formation and are not necessarily, therefore, very good for revealing subtle changes due to true long-term toxicity. BASIC PRINCIPLES OF TOXICOLOGICAL INVESTIGATION Objectives Investigations of toxicity may be carried out in isolation as single studies, or part of a program for the safety evaluation of a new chemical. In the case of novel drugs, the purpose of testing is to support initial entry to humans in volunteer studies and subsequent trials in patients. The amount of testing required for a pharmaceutical increases, as the intended duration of treatment in humans increases. Other

62

A Guide to Practical Toxicology 2nd Edition

objectives include assessment of environmental impact for pesticides or the toxicity evaluation of intermediate chemicals used in the production of others, usually for occupational purposes. Broadly, the objectives and philosophy of a program of testing are driven by the intended use and classiﬁcation of the test chemical. It is quite conceivable that a substance may fall into two categories and be tested according to both sets of guidelines. Whether part of a program or as a stand-alone study, there should be a robust, preferably simple, study plan with a clearly stated objective. In animalbased tests, this objective is likely to be broadly stated without precise endpoints, usually “to determine the toxicity of . . .” This is in recognition of the complexity of animals and the large number of endpoints that are addressed in these studies. With simpler test systems the objectives are more precise, for instance, to determine chromosome damage. This objective should be strictly adhered to, if the integrity and interpretability of the study is to be maintained. It is not sensible to incorporate an assessment of reproductive toxicity into a 13-week general toxicity study, if an animal becomes pregnant unintentionally. Reallocation of animals from one purpose to another may produce unwanted bias in the data, making interpretation more complex. In regulatory toxicology, there is considerable emphasis on demonstrating toxicity rather than safety, as a negative outcome (safety) cannot be proved with conﬁdence; safety, therefore, has to be inferred and demonstration of a toxic dose supports this inference. Consequently, for chemicals of low toxicity, there is only reluctant acceptance of limit tests or doses, which may be maximally practicable due to the physical characteristics of the chemical, for example, low solubility. However, there is little sense in giving excessively high doses, as there is frequently a dose beyond which absorption is saturated and no further systemic exposure can be achieved. As a consequence, toxicity expressed at high dose may be due simply to local effects in the gastrointestinal tract, which will probably not be relevant to humans in whom signiﬁcantly lower doses or exposures can be expected. Test Substance Considerations The quality and characteristics of the test substance are crucial to the successful conduct of a toxicity investigation or to a development program. Impurities can have far reaching effects on the toxicity of substances, both for study programs and when marketed for human consumers or users. Impurities in tryptophan, used as a nutritional supplement in ﬁtness programs, were responsible for muscle wasting in many consumers and for a number of deaths; this debacle occurred after production changes, which introduced new impurities that were not present in the early batches. Production processes or the pathways of synthesis often involve the use of solvents which can be difﬁcult to remove. The use of dichloroethane is controversial because it is known to be carcinogenic in rodents at high doses. Although the levels present in the ﬁnal material may be far below the level for carcinogenicity to be evident, it is better to be safe and to remove it from the

Determination of Toxicity: The Basic Principles

63

synthesis. Genotoxicity studies for mutagenic potential are particularly at risk from low levels of contaminants that may give a false-positive to a nonmutagenic substance. It is normal to use the purest possible material in deﬁnitive toxicological investigations to avoid false reactions due to impurities. Impurities may express greater toxicity than the test molecule; for instance, TCDD was a signiﬁcant contaminant in Agent Orange, used as defoliant in Vietnam by the U.S.A. armed forces. When effects are receptor mediated, impurities may compete with the parent molecule at binding sites, thereby affecting toxicity or pharmacological response. Having said that, for pharmaceuticals, there is some sense in using slightly less pure material than the clinical intention because this may “qualify” the impurities in toxicological terms; the test animals will be exposed to the same impurities as patients. The problem here is that the scale-up of production may produce a different impurity proﬁle in terms of both quantity and identity. When a toxicological program as a whole is considered, it is best to use the same batch of test substance or batches of similar or better purity that are consistent with the product to be sold. The quality of the test substance should be deﬁed by suitable certiﬁcates of analysis or by information from the supplier in the case of studies that are not part of a development program. By the time that early studies in patients begin, new pharmaceuticals should be accompanied by analytical certiﬁcates to Good Manufacturing Practice standards and the supporting toxicity studies should be conducted in material of the same standard. The physicochemical characteristics of the test substance should also be considered, as these can have signiﬁcant impact on the choice of vehicle or carrier for toxicity studies and may determine whether such studies can be conducted. For example, volatile compounds may be tested by inhalation in animals but need special testing apparatus for in vitro, genotoxicity experiments such as the Ames test. The presence of a chiral center in a molecule can also affect toxicity or action, as the enantiomers may be associated with different effects, either in degree or type; for example, thalidomide has two enantiomers, only one of which was associated with the characteristic toxicity. For this reason, it is sometimes advisable to develop only one of the enantiomers; in fact, this may well be the preferred strategy of the regulatory authorities. Development of the racemic mixture may be acceptable, if there is rapid conversion between the two forms in vivo, making distinction between them impossible. Carrying System and Route of Administration In order to bring the test substance together with the test system, it is usual to formulate it with a solvent or carrier that allows the concentration or dose of the substance to be varied in a controlled manner. The choice of carrying system or vehicle in which the test substance will be dissolved or suspended is closely

64

A Guide to Practical Toxicology 2nd Edition

interlinked with the choice of test system and with the characteristics of the test substance. In an ideal world, such carriers are simple and aqueous for use with easily soluble compounds; reality is often sadly different and increasingly complex formulations are being devised to achieve adequate exposure of the test system. The intended route of administration has a profound inﬂuence on the choice of vehicle and is chosen according to the purpose and objective of the intended study. To examine the potential toxicity of a drug or agrochemical for which the expected route of therapy or exposure is oral, the most appropriate route of administration is also oral. For studies aimed at occupational health, dermal administration, or inhalation are also likely to be relevant routes of exposure. For drugs, clinical intentions will drive the choice of route in the toxicity studies, although almost all drugs are also given intravenously at some point in order to generate comparative pharmacokinetic and bioavailability data. For dermal preparations that are not absorbed signiﬁcantly, greater systemic exposure can be achieved by parenteral or oral administration, allowing “worst case” systemic exposure to be investigated. This is an important consideration if the barrier functions of the patient’s skin have been compromised by abrasion or other breakdown, allowing greater absorption than through intact skin. The best vehicles or carrier systems are the simplest, usually aqueous, or with suspending agents that are toxicologically inert. For test substances that are poorly soluble in aqueous media, corn oil or similar oil may be used. However, this is not suitable for in vitro experiments and cannot be used orally in some animals such as rabbits, where the physiology of the gut is not compatible with large amounts of lipid. Wetting agents such as polysorbates (e.g., Tween 80) can have their own effects in the gastrointestinal tract, leading to fecal abnormalities and possible effects on absorption of the test substance. Use of simple aqueous media is unlikely to be associated with long-term effects. Use of corn oil in rats or mice, at up to 5 mL/kg, is usually associated with a compensatory decrease in food consumption and slight functional change in plasma lipid levels, which is unlikely to be of toxicological signiﬁcance. Increasingly complex vehicle systems, devised for insoluble compounds with a view to increasing test system exposure, can be associated with their own toxicity, which can mask the effects of the test substance. For substances with low solubility in water, it is more difﬁcult to design a sensible in vitro assay, as these are generally water based. In these cases, water-miscible solvents such as ethanol or dimethyl sulphoxide can be used, provided the concentration is kept low; even then, there is the possibility that the test substance will precipitate when it hits the water of the experimental medium. In some in vitro tests, it is possible to claim exposure of the test system if the test substance is present as a precipitate. Broadly speaking, the more complex the vehicle, the more likely it is to be associated with its own toxicity; although the effects of simple solvents such as dimethyl sulphoxide or ethanol have their own distinctive toxicities.

Determination of Toxicity: The Basic Principles

65

Preparations for intravenous administration pose a particular problem and often mean that, with limited solubility, studies are conducted at low doses that are nearly meaningless unless continuous infusion techniques are used. It is important to avoid intravenous use of solvents or excipients that have their own toxicity, for example, histamine release may be triggered in dogs by injection of polysorbates. For dermal administration, the vehicle is usually chosen to be similar to the circumstances of exposure in the human target population. For drugs, this means that the formulation tested in toxicology studies should be as close as possible, preferably identical, to that intended for use in patients. Vehicles are usually chosen to enhance absorption across the skin and this applies equally to the clinical situation as to the toxicity investigation. For in vitro investigation of dermal effects using skin replacement systems, the vehicle should be chosen to be compatible with the test system chosen. For agrochemicals and food additives the most usual carrier is the diet, as this corresponds to the expected route of human exposure. Admixing exogenous chemicals with diet is usually straightforward, although it is crucial to establish that the ﬁnal mixture is homogeneous. In difﬁcult cases, the test substance may be dissolved in a solvent or food-grade oil before adding to the diet. With organic solvents caution must be exercised, as residues can persist despite efforts to remove them, acetone being a case in point. With dietary administration, there exists the possibility that the diet may become unpalatable at high concentrations. In any case, care should be exercised that the additions to the diet do not affect the nutritional status of the animals. The maximum inclusion rate for nutritionally inert test substances is generally taken to be 5%, which is approximately equivalent to 2 g/kg/day in rats. For food additives, the inclusion level may be raised to 10% but care has to be taken with nutrition of the animals. This factor is likely to be a problem in testing high concentrations of individual genetically modiﬁed foods, as it is unlikely that effects will be expressed at normal dietary inclusion levels. However, the relevance of effects expressed at unrealistically high dietary inclusion of such foods should be questioned before the study begins, there being no point in generating data that are irrelevant. As an alternative to diet, the drinking water may be used as a route of administration but this has a number of disadvantages over the diet, especially in tracking the amounts of water, and therefore, chemical ingested as distinct from that spilled. With both water and dietary administration, there is the ever present problem of recording the amounts consumed. With unpalatable diets, there is usually a signiﬁcant degree of “food scatter (especially in the ﬁrst few days)” where the diet is discarded by the animals without consumption. Estimation of this, especially for low amounts, has usually been only semiquantitative; the trend towards housing animals on sawdust bedding makes estimation of scatter practically impossible. With drinking water, evaporation of water spilled or lost through playing with the outlet means that there is no hope of estimating amounts lost. Without such estimation, there can be no accurate calculation of dose levels in terms of mg/kg/d.

A Guide to Practical Toxicology 2nd Edition

66

Dietary administration of pharmaceuticals in long-term carcinogenicity studies is often used, and is an attractive option in cases where the pharmacokinetics are such that admixture with the diet may produce a greater systemic exposure to the test substance than once a day dosing by the oral route. A more pragmatic reason is that, this route of dosing is simple and less labour intensive than oral intubation (gavage). The calculations for dietary concentration required to achieve the desired dose levels are straightforward, the dietary concentration increases with continued bodyweight gain by the animals. To calculate dietary concentrations (ppm) to achieve constant dose, the following equation is used. Dietary concentration Target dose (mg/kg/day) × estimated mid-week bodyweight (g) . = Estimated food consumption (g/day) To calculate the achieved dose level from food consumption and dietary concentration, the formula is as follows: Dose (mg/kg/day) Dietary concentration (ppm) × food consumed (g/day/animal) . = Mid-week bodyweight (g) Inhalation toxicity is a specialized branch in its own right, due to the technical complexity of generating respirable atmospheres at precise concentrations and monitoring them. Because of the vast amount of equipment needed to generate, administer, and then to dispose of waste air, it is an extremely expensive method of administration. A related route is intranasal administration that is increasingly popular for some drugs; in this case, the vehicle used can prove to be irritant to the nasal epithelia, thereby compromising absorption. Choice of Test System The test system should be selected on scientiﬁc grounds, bearing in mind its suitability for achieving the experimental objective and whether it is ethical to use it. Only small amounts of test material may be available, especially in the early development of a chemical, and this may be a factor that inﬂuences choice of test species. If the objective is to study potential effects in a nonhuman species, it is usual to use that species or to use an in vitro preparation from that species. Although it is politically correct to think in terms of moving away from animal experiments to studies in humans or to in vitro techniques, many in vitro methods require fresh tissue or cell preparations from animals; although animal use may be reduced, it is not eliminated. in vitro methods are particularly useful in screening a large number of chemicals during a process of lead candidate selection, usually for a speciﬁc activity or toxicity that is of interest. The only viable rationale for choice of test system, in cases where the ultimate objective is to predict safety in humans, is to choose a test system that is sufﬁciently close to humans in terms of pharmacological susceptibility, metabolism,

Determination of Toxicity: The Basic Principles

67

pharmacokinetics, pharmacodynamics and physiology. This is especially so for pharmaceuticals. However, it is highly unlikely that a perfect match will be available and therefore, the choice of test system must be a pragmatic compromise. The factors to be considered are summarized in Box 1. In addition, there are also other factors to remember, including housing, diet, genetic homogeneity, lifespan, reproductive cycle and litter size, the size of individual, and the amount of test material needed. A test system may be chosen according to similarity of metabolism in the available species in comparison with that expected in man by using in vitro preparations of hepatocytes, microsomes, or isolated enzymes. A typical experiment would use hepatocytes from rats, dogs, nonhuman primates, and humans; minipigs may be added or substituted, as appropriate. This type of experiment is often used in pharmaceutical testing where there is a regulatory requirement for a two species—a rodent and a nonrodent. One of the caveats here is to look at metabolism in quantitative terms as well as qualitative. Although all the metabolites predicted to be present in man might be present in the test species selected, the quantities produced may be very different. Metabolism in man may be largely by one pathway and in laboratory species by a completely different route. The result is likely to be that, a major metabolite in man has not been properly examined in the experimental animals; some careful decisions will be needed, on what to test and in which species. The question being asked in the proposed experiment will, in most cases, determine the type of test system. The shortest question-–Is it toxic?—requires the most complex test system, as the range of possible interactions is so large that they cannot be encompassed in a simple in vitro preparation. On the other hand, a question addressing a single deﬁned endpoint, such as DNA damage, can be answered in vitro in a simple test system. Choice of in vivo test systems is usually straightforward, as the numbers of laboratory species are quite small, the mouse and rat, in various guises, being the favorites. Unless the more exotic transgenic strains are selected, they are also inexpensive and easy to maintain. A further factor in favor of the use of rodents is that because of their ready availability, ease of husbandry, and price, it is relatively easy to design a statistically sound experiment without breaking the bank. Speciﬁc strains of rodent can be selected to answer questions of mechanism; for example, the Gunn rat is deﬁcient in glucuronosyl transferase and thus can be used in mechanistic studies of toxicity due to phase II metabolism. For in vitro systems, the choice is more complex and can be more driven by the question asked; for example, the potential for nephrotoxicity can be investigated in isolated nephrons or kidney slices. As indicated previously, the simpler and more direct the objective of the experiment, the simpler the test system can be. For a broad investigation of toxicity for a new compound, it is normal to use an animal system because whole animals have all the complex interrelationships in place, between organs and tissues. Absorption from the gut and passage through the liver can result in metabolites

68

A Guide to Practical Toxicology 2nd Edition

Box 1 Factors in Test System Selection The following has been compiled with ultimate human use in mind; similar criteria can be used for other target species. r Similarity of absorption, distribution, metabolism and excretion, and phar-

r r

r r r r r

macokinetics to humans. Choice may be inﬂuenced by comparative studies of metabolism in vitro, especially using hepatocytes from possible test species and humans. Scientiﬁc justiﬁcation: Using a test system without scientiﬁc reason is not sensible, although some regulatory guidelines may insist on strange choices on occasion. Genetic homogeneity: Inhomogeneity means that the system is likely to be more variable and that normality is more difﬁcult to deﬁne; increased variability reduces the ability of the study to detect minor adverse change. Strain, outbred versus inbred, especially for rodents: These choices have been extensively examined by MFW Festing (1,2) Availability, feasibility, and cost: There is no point in commencing an extensive testing program if the most suitable species is not readily available at sensible cost. Regulatory acceptance: Marmosets and minipigs are examples for which regulatory acceptance has built up over a number of years. Purpose of test and applicability of species: For a new veterinary drug for use in dogs, it is essential to carry out the evaluation program in dogs. Validation: Investigations of genotoxicity normally require the use of validated cellular or bacterial systems or exposure of tissues such as bone marrow in rodents. Validation applies to newer in vitro systems in particular, but also to any new in vivo tests such as the local lymph node assay in mice.

that affect the kidney or other tissues. Such interrelationships cannot, at the present state of the science, be reproduced in vitro, although progress is being made in the construction of individual tissue systems. Liver bioreactors are under development for investigation of drug metabolism, and the possibility of adaptation for toxicity screening will no doubt follow on from this work (3,4). A variation on the in vivo/in vitro theme is the use of ex vivo systems. In these animals are dosed once or twice with the substance of interest and are killed at an appropriate interval after administration. Tissues can then be removed for study in vitro. This type of system is used frequently in the unscheduled DNA synthesis test, in preference to the exposure, in vitro of hepatocyte cultures. The Comet assay is another application of this strategy.

Determination of Toxicity: The Basic Principles

69

In comparison with animals, in vitro systems are usually inexpensive, quick to complete, and tend to give simple data sets. However, they can be technically challenging and, as a consequence, may not be reproducible in inexperienced hands or from one laboratory to another. Animal test systems, in contrast, tend to be expensive, both in terms of the facilities needed to maintain animals and in study conduct, and also tend to be slower in completion. They cannot be performed without permits or licences from governmental authorities, which cover both the facilities and the experimenters. In addition, the data sets produced can be very large and complex to interpret; a 4-week rat study with 80 animals, produces more than 10,000 individual data points. A research programme based on animals will be more expensive and less ﬂexible than one based on in vitro techniques but, because of regulatory reliance on animal tests, this choice is not available for every study type. One of the objectives of toxicological study is to predict effects in humans. There has been considerable criticism of the accuracy of extrapolation of animal data to humans, although as understanding of the various animal models improves with our understanding of their relevance to humans, this is becoming less of a problem. However, the extrapolation of results to humans becomes more difﬁcult, the further one moves taxonomically from humans or from a whole animal model. It is one thing to extrapolate from rats to humans, but quite another to use an in vitro system of liver slices from rats or, on an even less complex plane, a rodent hepatocyte culture, to achieve the same predictive power. Although the best predictive model for humans would appear to be humans, this has difﬁculties, not least the ethical considerations. Some experiments were performed in convicts in the United States, but these were not extended and attracted much criticism. By any of the above considerations, humans fail as a test system candidate. They are large, requiring huge amounts of test material, which, in the early stages of development of a chemical, will probably not be available. They have a long lifespan and slow growth patterns, making assessment of toxic effects on growth difﬁcult. They require and consume a varied diet, in large amounts, that is not easy to standardize (diet affects the absorption of chemicals). Investigation of reproductive effects is long winded, due to the long period of gestation and low litter size. They are extremely heterogeneous genetically, meaning that normality is difﬁcult to deﬁne. The data obtained from a randomly selected group could be so diverse, as to be uninterpretable. Above all, the moral arguments against the use of humans have been used in recent years to slow the acceptance of volunteer tests with pesticides, conducted to investigate human metabolism and pharmacokinetics. Possession of these data would make risk assessment of selected pesticides much more secure and would help to kill off the concept of pesticides as demon chemicals that do nothing, but harm. If people considered the chemical composition of a cup of coffee, they would look at pesticides very differently. Recent advances in microdosing using low doses of radiolabeled compound, have made the prospect of sensible and ethical experiments in humans with agrochemicals, more likely. While such

70

A Guide to Practical Toxicology 2nd Edition

studies may have limitations for pharmaceutical development due to their low dose relative to clinical doses, this would not be a problem for agrochemicals where the expected human dose should be expected to be very low. The test systems available for the various types and areas of investigation will be reviewed in greater detail below, under the sections dealing with investigation of speciﬁc toxicities in the succeeding chapters. Study Design Basics and Confounding Factors To facilitate conduct and interpretation of the ﬁnal data sets, it is best to keep the design of toxicological studies simple but robust. Design, whether of generic guideline protocols or of tailor-made experiments, should take into account the three Rs of reduction, reﬁnement, and replacement as well as any regulatory requirements. The presence in the testing laboratory of relevant historical control data relating to the test system to be used has to be considered in deciding the size of control groups. The classic design for a toxicological investigation has three or more treated groups and a control group, which receives the same treatment regimen as the treated groups but without the test substance. Positive controls treated with reference compounds may be included to check the sensitivity of the assay (particularly in in vitro experiments). It is important to demonstrate exposure of the test system to the substance under investigation. This is not a problem in vitro, where the test system is exposed to the test substance in the culture medium usually as a solution. In animals, however, it is necessary to take blood samples for toxicokinetic analyses, toxicokinetics being the term used to describe pharmacokinetics at high dose levels. While collection at several time points after administration is not a problem in dogs or nonhuman primates, such as cynomolgus monkeys, rats and other small animals are too small for this and it may be necessary to add groups of satellite animals to the study solely for this purpose. This means that the animals allocated to the study itself are not stressed to the extent that the toxicity of the test substance is exacerbated or masked. However, with increasing sophistication and sensitivity of analytical methods, the use of satellite animals may not be necessary, especially in early screening studies using sparse sampling techniques. Toxicokinetic data demonstrate the extent of exposure to the test substance and are vital in the full interpretation of the data that result from the study. A further consideration is the metabolism of the test substance and the toxicity or otherwise of the metabolites, as indicated by ADME (absorption, distribution, metabolism, and elimination) studies that are conducted as a separate program of experiments. The data from these studies should be considered in conﬁrming the choice of test system. If the test substance is carried in a particularly unusual vehicle, it may be necessary to have a further, negative control that is treated with water or a similarly benign substance, to take account of any toxicity due to the vehicle. Although there may be statistical arguments for having larger numbers of control animals than in

Determination of Toxicity: The Basic Principles

71

the individual treatment groups, it is normal toxicological practice to use equal numbers. Having said that, there are cases where larger numbers of controls are used, particularly in carcinogenicity bioassays where two control groups of equal size to the test groups are often used. Use of greater numbers of controls can help to obviate the effects of exiguous historical control databases. In routine toxicological investigations, the choice of controls is simple; a suitable number of cultures or animals is allocated to the control group or groups from the same stock set, as for the remaining groups in the study. In epidemiological investigations, where the subjects of investigation are humans exposed to the substance under investigation, the choice of controls becomes much more critical and complicated. For such studies, it is vital that confounding factors are avoided and that the correct comparators are chosen. Although confounding factors are well known in epidemiology, they should also be considered in routine toxicological investigation. One such factor is high heart rate in response to restraining procedures for recording electrocardiograms in unanesthetized animals. Unless an animal is accustomed to the procedure, the unfamiliarity with the situation will result in abnormally high heart rates, which can obscure a milder compound related effect, possibly associated with reduced blood pressure. Such effects can result in minor heart lesions that are not detected until histopathological examination (5); the use of telemetric implants can avoid such problems, although their routine use in toxicity studies is unusual due to cost. Another frequent cause of confounding arises when blood samples for clinical pathology are taken immediately after extensive sampling for toxicokinetic investigations. As the controls are not normally subject to the same sampling regimen for toxicokinetics as the treated animals, the samples taken for clinical pathology will probably show an apparent treatment-related anaemia and associated effects. Experimental investigations should be timed so that they will not affect future examinations or be affected by previous procedures. Husbandry can also be a source of confounding factors, especially with regard to stress, which can have a variety of effects. As a result, care should be taken to avoid unnecessary levels of stress, which might complicate the interpretation of the data. Do not change cages immediately before critical examinations on a study. Correct housing is one means of avoiding stress in laboratory animals, and there is increasing emphasis on cage size and environmental enrichment. Group housing is generally considered to be the best husbandry system, but is not always appropriate if the beneﬁts are negated by aggressive behavior. For instance, male mice are usually housed singly because of ﬁghting; lesions in group-housed male mice have been shown to lead to subcutaneous sarcoma when allowed to persist, an effect that can be exacerbated by treatments that increase aggression (6). This may give a false impression of carcinogenic potential. Although husbandry is clearly an important factor in the maintenance of animal test systems, its equivalent should not be neglected for in vitro systems, where inappropriate storage or preparation of cell cultures can lead to test systems drifting from expectation.

72

A Guide to Practical Toxicology 2nd Edition

In all toxicological investigations, the quality of data that are generated are paramount. Poor data—incomplete, badly recorded, or ill-chosen timings—will probably result in poor interpretation of the experiment. GLP has made a huge contribution to the quality of data recorded in regulatory studies. Although it has been suggested that GLP and basic research do not mix well, the principles of GLP have a lot to offer to this area as well, as it should be a duty of all toxicologists to record data as accurately as possible. Secure interpretation can only be made from a complete set of appropriate data; in this, it is probably better to overrecord slightly as recorded data can be dismissed as irrelevant after the event, but unrecorded data cannot be interpreted. Having said that, it is easy to get carried away on a wave of enthusiasm and record everything, it can be difﬁcult to draw a sensible line between under- and over-recording, or to overburden the protocol with too much detail that endangers the interpretability of the ﬁnal product. Choice of Dose Levels or Test Concentrations The correct choice of dose level is crucial to the successful completion of every toxicological experiment and is normally achieved by use of a small preliminary study or by looking at the results of other studies. The normal procedure is to use a sighting or dose range-ﬁnding study or experiment, to assess the toxicity of the test substance in the same test system and under the same conditions as for the main study. Typically, a small quantity of the test system is exposed to increasing doses or concentrations of the test substance until a reaction is seen that indicates that a maximum tolerated dose level (MTD) or concentration has been reached. For studies in animals, the MTD is either used as the high dose in the main study or is used to select a slightly lower level that is expected to result in some toxicity but also to result in the survival of the animals until the treatment period has been completed. In in vitro systems, the maximum concentration is usually chosen according to degrees of toxicity seen; for example, the highest test concentration in cytotoxicity studies for registration is usually selected as the one that causes 50–80% toxicity in the test system. In the Ames test for bacterial mutagenicity, the thinning of background lawn, the minimal growth of bacteria resulting from a small amount of histidine in the culture medium, is taken as a measure of toxicity. Because the sighting studies tend to use lower number of animals or test replicates than the main study, they are sometimes unreliable in their prediction of high dose, either more or less. A typical design for an in vitro study is to use a wide range (e.g., 1000-fold) of concentrations up a maximum of 5 mg/plate or 5 mg/mL, using two plates or cultures at each concentration. In animals, it is usual to have an initial phase in a small group which is treated daily, with dose levels that are increased at twice weekly intervals, until effects are seen that indicate that an MTD has been reached. A second group of previously untreated animals is then dosed for 7 or 14 days at the chosen high dose to ensure that reactions are consistent; this second phase is important in ensuring that tolerance has not built up gradually in the animals receiving the rising dose levels. Having completed

Determination of Toxicity: The Basic Principles

73

a sighting study, it is still possible to obtain unexpected results, either excessive toxicity or none at all when the main or deﬁnitive study is started. Although the three-dose level design is calculated to mitigate the effects of the loss of the high dose or concentration groups, it is better to avoid this as far as possible. Some of the explanations for unexpected results are explored in Box 2. Box 2 Troubleshooting Dose Range-Finding Results Unexpected results may arise from a wide range of factors, including the following: r Different age of animals used in the pilot and main studies: The metabolic

r r

r

r

capability of the liver in rats increases at about 6 and 8 weeks of age; it is possible that a sighting study in 7-week-old animals will give results different to those in animals of 10 weeks, for instance, if the test substance induces its own metabolism to a toxic metabolite that is not present in younger animals. Different strain or supplier: Responses vary from one strain to another and can also do so among suppliers. Dose range-ﬁnding data from another laboratory: There is no guarantee that the conditions in the original laboratory will be the same as in the facility chosen for the main study. In particular, husbandry can be signiﬁcantly different, leading to different absorption proﬁles. Differences in formulation or form: Signiﬁcant differences may arise with changes in formulation; if solubility and absorption of the compound are poor, it is tempting to change the formulation to increase absorption. Changing to an isotonic parenteral formulation can result in very much quicker bioavailability and greater toxicity. Micronizing is often used to enhance bioavailability and can lead to greater toxicity. If a new form or formulation is suggested, a short study should be performed to check consistency with the earlier work. Differences between na¨ıve animals and those dosed over several days where an animal is dosed at a low initial level that is gradually increased, tolerance to the test compound can develop that is not evident in na¨ıve animals. Dosing na¨ıve animals from the outset at the chosen MTD can result in unexpectedly high toxicity because they have not had the chance to acclimatize to gradually increasing dose levels.

Such short sighting studies are usual only in the early stage of development, or when there is a need to investigate a new formulation or form of test substance. As a general rule of thumb, it is normal practice not to administer more than half of a dose that has caused death in a previous group or study. Having said that, this approach is likely to be conservative in some cases and it is probably best to use it as a starting point in choosing the new dose level. Factors to take into account are

74

A Guide to Practical Toxicology 2nd Edition

any existing dose-response and the types of signs and toxicity seen at the lethal dose. A program of toxicological investigation in animals normally progresses from sighting studies to 2- or 4-week studies and then on to studies of 13 weeks or longer. At each stage, the results of the previous study are used to select dose levels for the next study. Successful dose level selection, in this case, depends on continuity of the factors discussed above. In other words, do not make radical changes to a formulation during a development program without further sighting studies; use the same strain of test system throughout and so on. It is also wise to go through a toxicological program systematically; data from a 2-week study may well prove unsuitable for selection of dose levels for a 26-week study. In general, animals can tolerate high dose levels of chemicals only for a short period but tolerate lower doses for much longer. Hence, a high dose of 300 mg/kg/day selected for a 4-week study might have decreased to 100 mg/kg/day, when the dose levels are chosen for the chronic toxicity or carcinogenicity studies. Duration of Treatment The process of harmonization of testing requirements for pharmaceutical products—enshrined in the International Conference on Harmonisation (ICH)— has arrived at agreed maximum lengths of toxicity study in the conventional species, assuming that they are proven relevant to the target species (usually human). In rats, this is 6 months and, in a second species (usually dogs), 12 months for new chemical classes or 9 months for chemicals in which toxicity has already been evaluated in previous programs. The difﬁculty lies in extrapolating effects seen at high doses in animals to those expected in humans at lower doses. The number of animals used in testing will be small relative to the numbers of humans exposed to the chemical, and it is important to be able to extrapolate the ﬁndings to the much larger human population to assess their relevance to humans. Such extrapolation is dependent on a thorough understanding of the chemical’s effects on the individual, whether animal or human (dynamic and toxic changes), and of the effects of the individual on the chemical (kinetics and biotransformation). Understanding these processes, dependencies, and inﬂuences is key to successful prediction of effect in humans and then to the process of risk assessment that follows. The conduct of a carefully designed program of toxicity studies, in a range of test systems, assists this understanding and makes risk assessments for human use more secure. Demonstration of Test System Exposure—Toxicokinetics It is a basic tenet of toxicology that effect is dependent on exposure; if there is no exposure there can be no effect, either directly or indirectly, immediate or delayed. Equally, if it is not possible to demonstrate direct or indirect exposure to a chemical, it is very difﬁcult to assert that an effect is due to that chemical.

Determination of Toxicity: The Basic Principles

75

For in vitro systems, it is usually appropriate to assume exposure of the test system, at least externally, in the case of cell cultures. The presence of precipitate in some genotoxicity assays may still mean that the system has been exposed, although it may not be to the nominal concentration. A ﬂattening of the response curve may indicate that absorption is limited at higher concentrations. In view of the apparent simplicity of in vitro exposure assessment, the following discussion is largely limited to the demonstration of exposure in animals. Exposure may be demonstrated by direct measurement of the chemical itself in an appropriate matrix, usually plasma or serum, sometimes in the urine. For substances that are rapidly and completely metabolized, it may be acceptable to measure a metabolite, particularly if that metabolite is the active moiety. Occasionally, it may be necessary to measure an indirect marker of exposure, for example, plasma glucose levels in response to insulin treatment (although this is a bad example because there are plenty of assay methods for insulin itself and it may be possible to distinguish between insulin given as opposed to endogenous insulin). The systemic exposure, the internal dose, is dependent on the amount of test substance that is absorbed from the external dose, that is, the amount of compound administered. Note that the term “internal dose” is also used in radiation to differentiate the radiation dose derived from an internally placed source of radiation as opposed to external sources such as X-rays, gamma-radiation, etc. For a substance that is administered orally, the internal dose is a function of the bioavailability of the material from the formulation delivered. As the lumen of the gastrointestinal tract is theoretically exterior to the systemic circulation, the dose is partitioned by absorption into absorbed material (the internal dose) and the nonabsorbed material (the residue of the external dose). Following absorption, the internal dose is further partitioned by the effects of metabolism in the gastric mucosa or (principally) the liver, so that in some cases, only a fraction of the given dose of parent compound will reach the systemic circulation to be transported to other tissues, which may include the target site of action or toxicity. If the substance is given by injection, then it is usually reasonable to assume that all the material has entered the body. This conﬁdent assumption may break down in some cases, however. If an inappropriate formulation is injected intramuscularly, it is possible for some of the material to be lodged at the injection site and not to be released into the systemic circulation, except very slowly. (This may actually be a desired effect if you are studying the kinetics of release from a depot formulation.) Equally, intravenous injection of a test substance as a bolus is usually associated with complete availability of the whole dose, given from the moment the injection stops. If, however, the injection technique is poor and some material is injected extravasally, it is possible for the immediate systemic exposure to be less than the given dose. Local precipitation of compound, as the formulation enters the blood, can have a similar delaying effect. Formulation is critical to the bioavailability even of a parenteral dose; variations in formulation, including physical form of the chemical, can make the difference between severe toxicity and nothing.

76

A Guide to Practical Toxicology 2nd Edition

This discussion is straying into the realms of toxicokinetic interpretation, which is dealt with elsewhere. However, it serves to underline the often-ﬁckle nature of exposure to chemicals by whatever route of exposure. The practical result is that internal exposure is a function of a number of factors, which include, route (and sometimes rate) of exposure, formulation, rate, and extent of absorption and metabolism, as well as the dose administered. From consideration of these factors, it will become apparent that a single blood sample may show that the animals have been exposed, but it will give no other information than the plasma concentration at the time of sampling and, if several doses are tested, of any proportionality of that concentration to dose. Kinetics of a compound’s distribution and elimination from the body are dependent on many factors, of which dose is just one. The critical element in this is time and so it is necessary to take a number of samples from animals on toxicity studies to show the time course and extent of exposure. For most toxicity studies, the chemical is given as a bolus dose and there is a clear point at which the complete dose is inside the animal and from when the collection of samples can be timed and concentrations assessed. For studies where the chemical is given over a prolonged period, this is not necessarily the case. In studies using intravenous infusion or inhalation, the chemical is administered at a constant concentration over a number of minutes or hours; it is normal in these cases to start collection of blood samples from the time that administration ceases until the start of the next dosing session or to 24 hours later. In studies where the substance is given in the diet, particularly in rodents, sampling is complicated by the feeding habits of the animals. As rodents eat at night, it is normal to collect samples at intervals during the dark period; however, switching on the lights may bring about a burst of feeding activity and this may distort blood levels. In addition, disturbance during the day may precipitate some feeding as a displacement activity. For some studies, it may be useful to invert the light-dark period to allow samples to be collected during the rodent night/toxicologist day. TOXICOKINETIC DESIGN Except in certain study types where the animals are killed a few hours after dosing, it is normal to take between six and eight samples from close to the time of dosing to 24 hours afterward. A typical sample progression might be 30 minutes and 1, 2, 4, 8, 12, and 24 hours postdose. For intravenous injection, it is normal to take a sample within 5 minutes of completion of dosing; the same principle can be applied to inhalation studies. In early studies, it is often possible to use a sparse sampling regimen, meaning that fewer samples are taken from fewer animals at carefully chosen time points; the danger of such an approach with an unknown chemical is that the samples may be timed before or after peak plasma concentrations have been achieved and the value of the samples is reduced. For chemicals with long half-lives it may be expedient to take additional samples at 48 hours postdose or later. When a depot formulation is used, samples should be taken at appropriate intervals over the expected lifetime of the implant.

Determination of Toxicity: The Basic Principles

77

It is normal to take samples on the ﬁrst day of dosing and at the end of the study. The ﬁrst set gives an indication of kinetics in na¨ıve animals and the second set should show if there has been any increase or decrease in exposure over the treatment period. While the norm is to take toxicokinetic samples on day 1 and at the end of the treatment period, it may be expedient to take additional samples on longer studies, midway through the treatment period. If the dose levels are changed during the study, additional samples should be taken on the ﬁrst day of the new dose administration. It is also normal to take a full set of samples from control animals; this is now a requirement in some jurisdictions and is a check for cross contamination, which may be seen even if the controls have not been given the test substance directly. The volume of blood that can be taken from an animal is usually limited by ethical constraints that may be set by local legislation. As an approximate rule of thumb, the laboratory animals routinely used in toxicity testing have blood volumes of approximately 70 mL/kg bodyweight (7). Suggested percentages vary according to source; however, a working group in the UK (BVA/FRAME/RSPCA/UFAW Joint Working Group) (8) suggested that it should be acceptable to take up to 10% of an animal’s circulating blood on one occasion. This assumes that the animal is healthy and normal and not too old. Sampling regimens should be designed to take this type of guideline into account and to allow adequate time for recovery, if sampling it to be repeated. For larger experimental species, including nonhuman primates (but not marmosets), it is normal to take the toxicokinetic samples from the animals on the main study, as they should be large enough to cope with the volumes of blood withdrawn. It is sensible to ensure that samples for clinical pathology are taken before the toxicokinetic samples to avoid artifactual anaemias due to excessive blood collection. For smaller animals, principally rodents but also marmosets, it is normal to include additional animals in the study design, which are used solely for collection of blood for toxicokinetic analyses. In deﬁnitive studies, it is normal to use three animals per time point and to sample them at no more than two or three points. REGULATORY FRAMEWORK AND INFLUENCES Particularly in the second half of the twentieth century, the regulation of toxicity testing increased tremendously in terms of practice and the types and duration of study conducted. Frequently, slightly different study designs were required in the United States, in Japan, or in Europe. This resulted in duplication of tests and greater use of animals, with associated increases in development costs, which were not associated with signiﬁcantly better quality of safety evaluation. In pharmaceutical regulation, the progress of the ICH process has contributed greatly to the streamlining of testing programs. This has been driven by industry and the regulatory authorities from the three main pharmaceutical markets. The process is

78

A Guide to Practical Toxicology 2nd Edition

likely to continue for the foreseeable future, as our knowledge base develops and as new testing paradigms are produced and debated. As new or unexpected effects have been detected, especially in the patient or consumer population, new studies or investigative programs have been added to the guidelines. The type of study conducted for a particular class of chemical has also been inﬂuenced by precedent, where scientiﬁcally irrelevant studies were conducted for regulatory advantage. Omission of the test from future programs for similar chemicals triggered questions from the box-ticking fraternity. The detection of unexpected effects in the human population, particularly for new drugs, inevitably has a huge inﬂuence on the practice of toxicological safety evaluation. In particular, the thalidomide tragedy had far reaching effects on testing regimens and methods, and the marked growth in regulatory toxicity and greater regulation can be charted from that point onward. Legislation, Guidelines, and Animal Use Animal welfare legislation is also an important factor to consider in toxicity testing, in terms of attainment of ideal housing standards and in the prevention or curtailment of suffering. In order to minimize the number of animals needed, it is important that testing is undertaken in healthy, unstressed animals, factors that have been reviewed in chapter 2. The restraints on excessive use of animals have become stronger over the last 25 years. In the United Kingdom, it is now necessary to seek special Home Ofﬁce approval, for the use of nonhuman primates and the use of great apes is forbidden. Testing is discouraged in cases where the work is a simple repeat of a study, although the testing of drugs which have come “off-patent” is a case where tests may be repeated because the original data ﬁles are not available to the generic producer. However, in many cases the new studies are conducted to the higher standards of the most recent legislation. Throughout this, the concept of the three Rs is central, the overall aim being to reduce the use of animals through reﬁnement of investigative programs and, where possible, by introduction of methods that replace them altogether. The move, away from animal experiments for routine toxicological safety evaluation, has been slow and will continue to be so while the science is still growing and, in particular, while regulatory acceptance of the methodology is minimal. However, progress is being made. Replacement may be exempliﬁed by the use of in vitro screening tests for dermal or ocular irritancy and the replacement of the rabbit in pyrogen testing by use of the Limulus amebocyte lysate test for endotoxins. Reduction has been achieved through regulatory acceptance of the local lymph node assay, instead of the guinea pig maximization tests in sensitization. The use of sparse sampling regimens in rodent studies reduces the need for large numbers of satellite animals for toxicokinetic evaluation, an effect that can also be achieved by the use of smaller sample volumes and more sensitive analytical techniques. Reﬁnement of technique includes reduction of suffering by offering environmental enrichment, particularly important in primates, careful selection of dose levels, and the reduction of pain. In particular, the evaluation of acute toxicity

Determination of Toxicity: The Basic Principles

79

testing toward the evaluation of severe toxicity rather than death, as required by the classic LD50 test, has markedly reduced animal use and suffering. The LD50 is still a useful concept, however, and may be estimated from the results of early studies and from the single dose toxicity studies that are still required. Legislative Inﬂuences on the Conduct of Testing The way in which tests are conducted is inﬂuenced by a raft of legislation, aiming to protect workers from occupational exposure to hazardous chemicals and, in animal facilities, to allergens and diseases originating from the test system itself. Regulation for the workplace is provided by the requirements of health, safety, and environmental control, which are present in many jurisdictions around the world. In the United Kingdom, for example, this is covered by the Health and Safety Executive and monitored through the provisions of COSHH (Control of Substances Hazardous to Health). These regulations are aimed at protecting the workers involved in the testing or production of new chemicals, and are the object of occupational toxicology. With some new medicines having therapeutic activity in microgram amounts, the protection of the workforce becomes of paramount importance, even if some of the purpose is slightly cynical and aimed at the avoidance of litigation. The records of worker health, which are retained as a result of legislative programmes such as COSHH will become an important epidemiological source of data in the assessment of health effects in the future. Regulatory Conservatism–The Way Forward The inherent conservatism of regulatory authorities with regard to test models or methods is also a factor to consider. The general requirement is to use test systems or models that have been thoroughly validated, so that the data will provide a secure and fully understood basis for interpretation of the data and their signiﬁcance for humans. This process of validation is complex and is often tied to extensive ring experiments—a series of similar or replicates of the same protocol performed in different laboratories around the world. There is an understandable tendency to use methods that are understood and have been shown to be reliable in scientiﬁc literature. In this way, the local lymph node assay has gradually become more accepted in prediction of sensitivity reactions as a replacement for guinea pigs. The use of in vitro models in regulatory toxicology is likewise made difﬁcult; at this point, they are clearly acceptable in genotoxicity testing and may become so in some safety pharmacology tests, which can be considered to be a branch of toxicity testing. The REACH (Registration, Evaluation and Authorisation of Chemicals) process in Europe has added a welcome boost to the efforts to validate and expand in vitro methods, as there is explicit guidance on avoiding unnecessary testing in animals. Public Perceptions A further, and important, inﬂuence is provided by public and political pressure. This is rarely inﬂuenced by complete appreciation of the scientiﬁc data relating to a set of circumstances and is often based on a part set of the data. Partial

80

A Guide to Practical Toxicology 2nd Edition

understanding of a complete data set or complete understanding of a partial data set are unlikely to lead to a satisfactory understanding of the mechanisms, leading to a particular set of effects or variation from normal, however, normality is deﬁned. Politics and science are often poor bedfellows and the use of science in political judgments, or vice versa, has to be carefully assessed according to the circumstances of the situation. The results may be overreaction and production of a set of regulations that can have worse consequences than the status quo. REGULATION OF STUDY CONDUCT—GOOD LABORATORY PRACTICE Another set of regulations, GLP, governs how the tests are conducted. These grew from the experience of the FDA (Food and Drug Administration in the United States) in the early 1970s, when it was discovered that a number of irregularities had been perpetrated in undertaking studies for new medicines. Inspection of submissions for pharmaceutical registration became more detailed following the thalidomide disaster of the early 1960s; this may be seen as the origin of many of the regulatory inﬂuences that affect the development and testing of chemicals of all types and classes. The FDA found many problems in submissions, most of which were unintentional deﬁciencies, inaccuracies, or simply ill-informed bad practice; however, a proportion were found to be due to intentional fraud. In an investigation of study quality, it was revealed that experiments were poorly conceived, badly performed, and inaccurately interpreted or reported. The importance of the protocol was not understood, nor the need to keep to it. Study personnel were not aware that administration of test substances and subsequent observations should be performed and recorded accurately. Managerial deﬁciencies were found; the study designs were often poor, which hindered evaluation of the data. Training and experience of the people involved in the conduct of studies was not assured. The surgical removal of tumours from animals and putting them back on study is the classic example of the type of practice that was loudly viliﬁed. Problems were found in two companies, Industrial Bio-Test and Biometric Testing Inc., which were so severe that 36% of studies from the former laboratory were invalid. Looking at the same laboratory, the U.S. Environmental Protection Agency found that 75% of the studies were invalid. Consequently, a draft GLP regulation was published in 1976 and ﬁnalized in 1979. This has spread across the globe becoming internationally acknowledged with the publication of the Principles of Good Laboratory Practice by the OECD (Organisation of Economic Communication and Development), which was revised in 1997. In summary, the GLP regulations were set up to increase accountability and prevent fraud in the safety evaluation of drugs; they have since been adopted globally and are applied to all toxicological testing performed for regulatory submission. They deﬁne the requirements that a testing facility must fulﬁll in order to produce studies that are acceptable to the various authorities, and the term GLP has become pervasive, as an adjective attached to facilities or studies.

Determination of Toxicity: The Basic Principles

81

The following is a brief review of the main points of GLP; for more detailed information, the reader is referred to the various GLPs published by organizations such as the OECD (9), FDA (10), and U.K. GLP Monitoring Authority (11). This is based on the U.K. Department of Health Guide to U.K. GLP Regulations 1999, which are very similar to European and OECD guidelines. The account here is necessarily brief and so does not reproduce the stirring text of the original. The Basic Elements of GLP The following are the basic elements of GLP: 1. Facility management: Responsible for setting up the Quality Assurance Unit (QAU) and ensuring that the basic requirements for GLP are in place. 2. A QAU that is independent of study conduct. 3. A complete set of Standard Operating Procedures that describe, in simple language, how each task or procedure is performed. 4. Facilities, equipment (including computers and their software), and reagents that are appropriate. 5. A designated Study Director and personnel who have been trained appropriately for their various roles; training records should be maintained and updated regularly. 6. A study plan or protocol for each study. 7. Characterization of the test item and test system. 8. Raw data generated in the course of GLP-studies. 9. A study report. 10. An archive. The phrase, “ﬁt for purpose” is used frequently in GLP and covers every aspect of GLP inception, management, and study conduct. Facilities should be suitable for the purpose for which they are intended. In other words, laboratories or animal facilities have to be appropriately designed and maintained; storage facilities for test items must be effective and working to speciﬁcations. This applies equally to the personnel performing the study; if they are not appropriately trained, they are not ﬁt for that purpose. However, this overarching concept does not mean that facilities should be overengineered or procedures carried out by overqualiﬁed personnel. These basic elements come together, so that the quality of any GLPcompliant study is reasonably assured. While occasional problems emerge, the likelihood is much reduced compared to the era before GLP; in particular, the system of inspection and penalties for infringement of the regulations ensure effective enforcement of the regulations. Facility Management Management is pivotal in the implementation and management of GLP. Their responsibilities may be summarized as follows:

82

A Guide to Practical Toxicology 2nd Edition

r Test facility management must be identiﬁed. r They must ensure that there are sufﬁcient numbers of qualiﬁed personnel to conduct studies and associated tasks and procedures. r They must provide appropriate facilities with properly maintained equipment; they must ensure that computer systems and their software are validated. r They ensure that records of the qualiﬁcations, training, experience, and job description are maintained for all staff involved in the conduct of GLP studies and that these people understand their duties. r Management is also responsible for setting up a QAU staffed by personnel who report directly to them and are independent of study management. An archivist must be appointed and an archive designated. r Management must appoint an appropriately qualiﬁed study director for each study, who signs the protocol and makes it available to the QAU. r A principal investigator should be appointed by management for parts of studies that are conducted at different sites, for example, analysis of blood samples for toxicokinetics. r They should also maintain a master schedule of all the studies that have been conducted, are in progress, or planned. Quality Assurance The QAU reports directly to the facility management and is completely independent of study management; they have no practical role in studies. Their roles are as follows: r To keep copies of all protocols and amendments. r To review the study protocol. r To ensure compliance with GLP by carrying out a program of inspections of study procedures and facilities. r To audit the ﬁnal report and sign a QA statement for it, conﬁrming that the report accurately reﬂects the protocol, the methods used, and the data collected. r To report all QA activities directly to management and the study director. A critical aspect of the QAU role is the inspection of critical procedures on GLP studies. These are activities such as colony counting in Ames tests, cell culture in genotoxicity studies, or recording of bodyweights in a long-term toxicity study. For long studies, a program of inspections is planned, which may include any aspect of study conduct; for short studies, it is normal to inspect procedures from a sample of studies rather than to look at each one individually. Standard Operating Procedures Standard operating procedures (SOPs) serve as guidelines for the conduct of good science. The language should be clear and concise while containing enough detail to complete the procedure. They form the basis for conducting a study or maintaining a facility but for procedures common to most studies or facilities.

Determination of Toxicity: The Basic Principles

83

Where the protocol goes into more detail than the SOP or differs in some respect, it is the protocol that takes precedence. SOPs should be written to cover all of the following areas: r r r r r r r

Test and reference items; Test system; Apparatus, materials, and reagents; Computer systems and validation of software; Study procedures; Documents, data, and records; QA

Facilities and Equipment Facilities and equipment must be ﬁt for purpose. Facilities should be of suitable design and build, suitably located, and large enough for the purpose. For equipment, there should be SOPs and records to cover all aspects of maintenance and use, including operator training. Equipment should be appropriate for the purpose; a rat should not be weighed on a balance intended for weighing dogs as it is unlikely to be sensitive enough, quite apart from the issue of cross contamination between species. Equipment may also be seen to include reagents, which should have similar standards of preparation, labeling, and, importantly, a valid expiry date. Computer software should be validated, especially if used for collection or manipulation of data. The Study Director and Study Personnel The Study Director is the single point of control for the study and the ﬁnal report. He or she must: r Approve, sign, and distribute the protocol and any amendments to study personnel, ensuring that the QAU also receive copies. r Deﬁne the roles and identity of any principal investigator at other sites where subsidiary investigations such as bioanalysis are conducted. r Ensure that the study plan is followed and assess, document and take appropriate action on any deviations from either the protocol or from SOPs. r Ensure that all data are fully documented for the validation of any computer software. r Sign and date the ﬁnal report and arrange for the data and the ﬁnal report to be archived. The Study Director’s signature indicates the validity of the report and compliance with GLP. Study personnel involved should be adequately trained in GLP and the procedures they are expected to perform. They must have the protocol, amendments, and relevant SOPs, and tell the Study Director promptly of any deviation from any of them. They must record all data promptly and in the proper place. All study

A Guide to Practical Toxicology 2nd Edition

84

personnel should have a training record; people who have not been trained in a particular procedure should not be allowed to perform it unless they are being supervised and trained. The Study Plan or Protocol These two terms tend to be used interchangeably, although the former tends to be used in the GLP guidance and the latter to be used in industry. The basic GLP practice is that there should be one protocol and one study number per study. The protocol should include the following information: r r r r r r r r r r

Study title and number; Identity of the test and any reference item; Name and address of the sponsor and test facility; The Study Director’s name and any principal investigators; Dates for approval, experimental start, and ﬁnish; Test methods; The test system and justiﬁcation for its use; Dose levels or concentrations and duration(s) of treatment; Timings of study activities; A list of records to be retained, where and for how long;

Any intended change to the protocol should be covered by a protocol amendment; this details any change made after the Study Director has signed the protocol, which is taken as the initiation date of the study. An amendment cannot be retrospective; where there is a deviation from the protocol that is unplanned, this should be recorded separately in a study or ﬁle note. The temptation is to produce a study note for every small deviation from the protocol; however, common sense says that some deviations, such as a lower temperature than target or higher humidity, are better reported in the ﬁnal report. Test Item and Test System The characteristics of the test item—batch number, purity and concentration, stability, and homogeneity in formulations-–must be given in the protocol. The test item has to be labeled and stored appropriately and all occasions of its use must be recorded so that the quantities used can be reconciled with the amount of material remaining at the end of the study or series of studies. The same applies to any reference item that may be used in the study. In a similar manner, it is important that the test system be correctly characterized and identiﬁed. A beagle dog is clearly a beagle; it is more difﬁcult to distinguish between two strains of rat. There should be conﬁrmation that transgenic mice have the appropriate genotype and that strains of bacteria or mammalian cell lines used in in vitro studies have the appropriate characteristics that are necessary for the intended studies. Details of the test system should include:

Determination of Toxicity: The Basic Principles

85

r Source, species, strain, substrain, number, batch and, if given, age and weight; r Details of storage or husbandry; r Details of order and receipt; Raw Data This is the basis of GLP, which the FDA has deﬁned as follows: “any laboratory worksheets, records, memoranda, notes, or exact copies thereof, that are the result of original observations and activities of a nonclinical laboratory study and are necessary for the reconstruction and evaluation of the report of that study. In the event that exact transcripts of raw data have been prepared (e.g., tapes which have been transcribed verbatim, dated, and veriﬁed accurate by signature), the exact copy or exact transcript may be substituted for the original source as raw data. Raw data may include photographs, microﬁlm or microﬁche copies, computer printouts, magnetic media, including dictated observations, and recorded data from automated instruments;” (FDA, 2007).

Measurements, observations or activities recorded in laboratory notebooks, used in research settings, including academia, should conform to the same standards as those for regulatory studies. Raw data should be: r Recorded promptly and permanently and have the unique study identiﬁcation code. r Records must be signed and dated by the person making the record; any changes should not obscure the original and should be signed, dated, explained, and auditable. r Copies should be veriﬁed by date and signature. r The Study Director is responsible for the raw data, which should be transferred as soon as possible to the study ﬁles to avoid losses. The Study Report There should be one report for each study, although it is acceptable to produce interim reports for longer studies. The ﬁnal report should reﬂect the raw data and the methods used. The overall intention is to facilitate the reconstruction of the study, if necessary. As with most aspects of study conduct, the ﬁnal responsibility rests with the Study Director. The study report should: r r r r

Identify the study, test, and reference items; Identify the sponsor and test facility. Give dates of start, experimental phase, and completion. Contain a GLP statement from the Study Director and a record of QA inspections. r Describe the methods used and refer to any guidelines followed.

86

A Guide to Practical Toxicology 2nd Edition

r Describe the results, including an evaluation and discussion of any ﬁndings together with a conclusion. r Include individual data. r Give the location of any archive used for raw data. Changes to the report after ﬁnal signature are made by means of a report amendment, in a broadly analogous way to protocol amendments. Other Aspects of GLP There should be an archive where data may be securely stored and from which data may be removed only on signature of a designated management nominee. The data should be protected from theft, vermin, ﬁre, and water. These criteria may be satisﬁed by a purpose built building or by an appropriate cupboard, depending on the size of the test facility. Regulation of GLPs is carried out by national authorities such as the FDA in the United States, the JMHW (Japanese Ministry of Health and Welfare) in Japan or the U.K. GLP Monitoring Authority. There may be severe penalties for deliberately not following GLP and the history of toxicological testing is dotted with ﬁnes and jail sentences of offenders.

REFERENCES 1. Festing MFW. Genetic variation in outbred rats and mice and its implication for toxicological screening. J Exp Animal Sci 1993; 35:210–220. 2. Kacew S, Festing MFW. Role of rat strain in the differential sensitivity to pharmaceutical agents and naturally occurring substances. J Toxicol Environ Health 1996; 47(1):1–30. 3. Bader A, Knop E, Fruhauf N, et al. Reconstruction of liver tissue in vitro: Geometry of characteristic ﬂat bed, hollow ﬁbre and spouted bed bioreactors with reference to the in vivo liver. Artiﬁcial Organs 1995; 19(9):941–950. 4. Bader A, Fruhauf N, Zech K, et al. Development of a small-scale bioreactor for drug metabolism studies maintaining heptospeciﬁc functions. Xenobiotica 1998; 28(9):815–825. 5. Belin V, Hodge T, Picaut P, et al. The myocardial lesions produced by the potassium channel opener Aprikalim in monkeys and rats are prevented by blockage of cardiac b-adrenoreceptors. Fundament Appl Toxicol 1996; 31(2):259–267. 6. Cordier A, Amyes SJ, Woolley APAH. Correlation between ﬁghting lesions and subcutaneous sarcoma in male B6C3F1 mice. Proceedings of the 29th annual meeting of the Society of Toxicology. Toxicologist 1990. 7. Derelanko MJ. Toxicologist’s pocket handbook. CRC Press, 2000. 8. BVA/FRAME/RSPCA/UFAW. Joint Working Group: First report on reﬁnement. Removal of blood from laboratory mammals and birds. Lab Animals 1993; 27:1–22. 9. OECD. OECD Principles on Good Laboratory Practice. Series on principles of good laboratory practice and compliance monitoring, Number 1 (as revised in 1997). January 1998.

Determination of Toxicity: The Basic Principles

87

10. FDA: Code of Federal Regulations: Part 58 Good Laboratory Practice for nonclinical laboratory studies. Title 21, Volume 1 (21CFR58.3) Revised 2007. 11. Department Of Health. The United Kingdom Good Laboratory Practice Monitoring Authority: Guide To UK GLP Regulations, 1999. February 2000.

4 Determination of Toxicity: In Vitro and Alternatives

INTRODUCTION The expansion of in vitro techniques continues as they become more reﬁned and reliable and as understanding of their meaning and utility grows. To cover the subject area adequately would require a separate book; the main difference from the previous edition, where I said the same thing, is that the book would now be much fatter. One aspect has not changed and that is the limited amount of regulatory acceptance of in vitro or alternative techniques. In vitro toxicology, in the sense of replacing animals completely, is a Holy Grail for some people and, at the current state of development, is likely to remain so; an unattainably elusive goal for which the goal posts move as you get closer to them. In vitro literally means “in glass”; interestingly, my dictionary of toxicology does not attempt a deﬁnition, although the Concise Oxford English Dictionary indicates that it takes place in a test tube, culture ﬂask, or outside a living organism. In vivo refers to the living, complete organism. These deﬁnitions are neat and offer black and white alternatives. The problem for the Grail hunters is that many in vitro techniques require the sacriﬁce of an animal to generate the test system. A test involving primary cultures of hepatocytes or liver slices, inevitably involves an animal to provide the cells or slices; although human lymphocytes can be obtained from volunteers, if need be on a regular basis. A reﬁnement usually referred to as ex vivo, involves treating a complete living animal waiting for an appropriate interval and then killing it and conducting the tests. This approach is used very successfully in tests such as the Comet assay and unscheduled DNA synthesis; there are clear advantages in such an approach as the ﬁrst part of the test

89

90

A Guide to Practical Toxicology 2nd Edition

is conducted in a whole animal with undisrupted metabolism, blood circulation, and dynamic interorgan relationships. Alternative methods are those, which have been developed to reﬁne existing methods, reducing the number of animals used and replacing them where appropriate or possible. Probably the best example is the local lymph node assay, which is taking over from sensitization testing in guinea pigs. This is based on the good productivity with the new method and the fact that it is quantitative rather than subjective. While this still uses animals, it may not be seen as an alternative to animals; in vitro systems for the assessment of dermal and ocular irritation are truly alternative and have overcome serious hurdles before creeping towards wider acceptance. The whole ﬁeld of in vitro has received a boost from the legislation relating to the European chemicals initiative REACH (Registration, Evaluation, and Authorization of Chemicals) and the Seventh Amendment to the Cosmetics Directive. The various texts of guidance for REACH have made great play of demanding extensive toxicology data while repeating the point that animal testing should be minimized. In the case of the Cosmetics Directive, the use of ingredients that have been tested in animals will be banned from cosmetics from 2013; testing of completed products in animals has already been banned in Europe. The following is a broad review of in vitro technique, strengths, weaknesses, and future potential. Inevitably, many of the areas covered in this chapter are relevant to those in others and there will be some overlap; in general, the more comprehensive coverage will be in the main chapter. RATIONALE FOR IN VITRO TOXICOLOGY Table 1 (1) gives a comparison of in vitro versus in vivo; in essence, a single in vitro test will tend to answer a simple question; a battery of appropriately chosen tests can answer a broader range of questions, which might be answered by a simple study in animals. There is considerable pressure to reduce and replace the use of animals in toxicological research or testing, for scientiﬁc, economic, and political reasons. This is driven by the three Rs put forward by Russell and Burch (2) in 1959; these are replacement, reduction, and reﬁnement, the aims of this being to replace animals in experiments, to reduce their use, and to reﬁne experimental technique and protocol. The overall goal is to reduce the use of animals in a scientiﬁc manner, while ensuring product safety, i.e., to reﬁne toxicological investigation so that human-relevant systems can be used for secure prediction of human hazard. There has been a large amount of success in these broad aims and, while some endpoints remain elusive, others have proved easier to be achieved in vitro. In vitro systems have a lot of strengths but also, at their current state of development, many weaknesses, which make them unacceptable to regulatory authorities when used to answer general questions. Their strength lies in the simplicity of their endpoints and their consequent use in the evaluation of toxicological

Determination of Toxicity: In Vitro and Alternatives

91

Table 1 In Vivo Versus In Vitro In vivo

In vitro

Whole body responses.

Responses of single tissue, cell, or cellular organelle. Usually only one endpoint. Can only answer simple questions. Metabolism systems have to be added and metabolites tested separately. Exposure via presence in culture medium (except in perfused organs). Limited life span for the test system. Test system choice more limited. Interpretation is more difﬁcult without information on expected or actual in vivo concentrations. Extrapolation to man from a single cell or subcellular organelle of a laboratory animal is much more difﬁcult as the result must ﬁrst be extrapolated to the complete animal. Patchy predictivity; lack of whole body response limits use in mainstream safety evaluations but potentially good for single endpoints (e.g., QT-interval prolongation). Limited experience with some systems; possibly due to inconsistent protocols, test system derivation etc. Can be very difﬁcult technically; reproducibility questionable for unvalidated tests.

Many endpoints in one test. Can answer complex questions. Metabolism is built in; separate studies on metabolites are usually not needed. Flexibility of route of administration, dosing schedule, and duration. Use of different species as needed. Ease of interpretation as a result of knowledge of dose (mg/kg) and systemic exposure. Comparability with man; biochemical and physiological processes are similar across species and similar mechanisms of toxicity. Predictive; repeat dose animal studies have been shown to predict 71% of human toxicities.

Experience of use; huge repository of expertise background data and published papers. Generally technically undemanding.

Source: Compiled with the assistance of Snodin (1).

mechanisms. Their principal weakness has been that they are not readily able to respond to chronic exposure and they cannot easily replicate the interrelationships that exist in the body between the various organs and tissues. In particular, they cannot (currently) give any indication of an effect that will accumulate over prolonged administration, such as progressive renal failure or neurodegenerative disease. However, they have a considerable role to play in lead candidate selection and in the evaluation of substance groups, such as cosmetics, where animals cannot be used. With new technologies such as combinatorial chemistry, there are increasingly large numbers of chemicals to screen for toxicity or efﬁcacy to aid selection of lead candidates for development. Traditional methods are too slow and costly for this. For a series of compounds for which a particular mechanism

92

A Guide to Practical Toxicology 2nd Edition

of toxicity has been identiﬁed, this may be investigated in vitro and the least toxic compounds selected for development. The objectives of screening include: r ranking a series of compounds in terms of effect and selecting one for development; r mechanistic investigations; r examination for speciﬁc effects, for instance, assessment of gap junction patency; r the early discarding of compounds which would fail later in development. Screening of members of a compound series for speciﬁc activity or adverse effects is critically important in some cases. For instance, retinoids may be screened for embryotoxicity. The degree to which compounds in a series express an effect may be due to structure–activity relationships; in such cases, it may be possible to conduct an initial computer based screen for the presence in the structures either of a speciﬁc set of parameters, for instance, bond angle or inter-atomic distances, or for chemical groups or structures that may be related to speciﬁc effect. Such computer-assisted design techniques have utility in both toxicology and pharmacology. In many areas of chemical development, especially for pharmaceuticals, failure of compounds may occur after considerable expenditure of animals, time, and money. Reasons for failure include formulation problems, toxicity, poor efﬁcacy, and poor acceptability (dermal formulations should be neutral in colour—not bright yellow). Clearly some of these are not toxicological in nature, but commercial pressures to develop a compound may result in the best of a bad series being selected. Reasoned application of in vitro techniques can bring forward the stage at which compounds are rejected. However, it must be remembered that very few useful compounds are without some form of toxicity, and it is likely that the overeager application of such early discard techniques or screens may result in the rejection of compounds that would have been successful. HOW AND WHEN TO USE IN VITRO OR ALTERNATIVE TECHNIQUES In vitro has enormous value as a screening process, which can usually be completed quickly and inexpensively. Although the subsequent testing of the chosen compound may have to be done in animals, the existence of in vitro screening programs diminishes their use, contributing to the achievement of the three Rs of reduction, reﬁnement, and replacement. On this basis, it may be helpful to consider that many in vitro techniques act as additional methods rather than complete replacements for the more traditional tests. One of the themes of this book is the differences in philosophy, testing protocol, and regulation between the various classes of chemicals. For example, animals cannot be used for testing cosmetic ingredients or products, meaning that the only tests that can be performed are in vitro or in human volunteers. The other extreme is seen with pharmaceuticals where the vast majority of testing, which is

Determination of Toxicity: In Vitro and Alternatives

93

undertaken to support clinical studies in man, is conducted in animals. Some areas of safety pharmacology are conducted in vitro (for instance, the hERG assay for the prediction of QT-interval prolongation), and the core battery of genotoxicity tests contains three in vitro tests and one in vivo. The development of the hERG assay is one example of how a better in vitro technique can replace another. A few years ago, the usual in vitro assay for assessment of the potential to prolong QT interval was the papillary muscle of the guinea pig or the Purkinje ﬁber of the dog; it is probably relevant to question the ethics of such tests given the increasing use of the hERG assay and of in vivo telemetry. The hERG assay uses a stable cell line, is reproducible and, although technically demanding, can be conducted relatively inexpensively and quickly. In vivo telemetry allows the animal to be used again as it does not need to be killed to achieve the experimental objective. For agrochemicals and chemicals that fall under the REACH legislation, the choice drivers will be different again. Before embarking on a program of in vitro studies, it is important to know what you wish to achieve. Apart from anything else, is the decision to use in vitro an appropriate one? Is the proposal to use a single test routinely to screen individual compounds for a particular effect, or is the intention to look at a series of compounds with the objective of choosing which one to develop? Whole embryo culture was popular at one time as a screen for potential teratogenic effects but has fallen out of favor. In some cases, it was used to bring forward the reproductive toxicity studies in a development program; however, in at least one company, after reviewing the reasoning and what the reaction would be to the answer, it was concluded that the test did not make a useful contribution to the decision processes and it was dropped. This comes back to the statement made in chapter 1, if you do not know what you will do with the answer, do not ask the question. On the other hand, whole embryo culture or related assays may well be useful in screening chemical series, such as retinoid derivatives and ranking them for development. It is probably more important to avoid any question where the answer is not understood; in this case, the question should be reframed so that a system can be devised that gives meaningful answers. An example of this type of test is the SHE assay, which is known to give results that correlate with carcinogenicity, although the reasons for this are not fully understood. As a result, this assay is little used outside academic laboratories. CONSIDERATIONS IN SCREENING PROGRAM DESIGN Given this important caveat about understanding the results of a test, a test or screening program should be designed with care; for programs where a sequence of tests is conducted, it may be useful to set up a ﬂow chart to give a set of predeﬁned limits to the process. It is a hazard of any screening process, whether high throughput or normal, that good compounds will be rejected from development because of adverse results in ill-chosen or ill-applied tests that are not truly

94

A Guide to Practical Toxicology 2nd Edition

predictive of effects in the target species. For instance, much comparative metabolism work in vitro is conducted in isolated hepatocytes from various species, including humans, the objective being to select a second species for toxicity testing. The human hepatocytes are derived from cadavers or liver surgery, and are typically a mixture from several individuals, who may or may not be deﬁned in terms of lifestyle (smoking or alcohol consumption), disease, or genetic metabolic polymorphism. It is unlikely that such a system will produce consistent results from one test to another; on this basis, there is considerable sense in developing a metabolically competent line of human hepatocytes in secondary (immortal) culture. This would have the advantage of being deﬁned metabolically and being reproducible. The development of several lines to cover the major polymorphisms would signiﬁcantly extend the utility of such a test. In addition, when fully validated, it is likely that this would gradually become accepted by regulators by default. Unless the endpoint of concern is absolutely critical to the success of a compound and it is well established that an in vitro assay is reliably predictive of that endpoint, it is unwise to rely on a single test to screen a series of compounds. Equally, failure in a single test should not necessarily bar a compound from further development; any ﬂow chart should take account of this possibility. At the end of the process, which may include short in vivo tests for a selection of compounds from the series, a decision may be reached by weighing all the results and striking a balance between desired activity and predicted toxicity. AREAS OF USE OF IN VITRO TOXICOLOGY As indicated, there is a vast range of different in vitro assays and they are broadly divisible into those tests that are accepted by regulatory authorities and those which are not. Except that, this simplistic division is complicated by the acceptance of some tests by some regulators, but not by others. In general, the most difﬁcult set of regulators to satisfy as to a test’s acceptability are those overseeing pharmaceutical development and registration; this assessment is based on the relatively few in vitro tests that are accepted as part of a pharmaceutical safety package of data. Tests that have been accepted in pharmaceutical development, or whose use is mandated by authorities, include genotoxicity assays in bacteria and cultured mammalian cells, the hERG assay in safety pharmacology, and various isolated heart preparations, including perfused rabbit hearts, guinea pig papillary muscle, and Purkinje ﬁbers from dogs. The testing of cosmetic ingredients and products is now almost exclusively in vitro due to the onset of the Seventh Amendment to the European Cosmetics Directive. Much development work is ongoing in order to better deﬁne and validate tests for when the use of animals in cosmetic development is banned completely. The testing of cosmetics is covered in more detail in chapter 17. The European chemicals legislation, REACH, is also going to be an important area in which in vitro tests will become very important, given the often

Determination of Toxicity: In Vitro and Alternatives

95

repeated statement that animal testing should be avoided. In this context, assays for endpoints such as skin corrosion and eye irritation will become increasingly important. In addition, the use of in silico techniques and computer software for the prediction of toxicity will also increase. CONSIDERATIONS IN THE DEVELOPMENT OF IN VITRO TESTS Although in vitro techniques have many attractions, they also carry a number of signiﬁcant disadvantages that makes them unsuitable (currently) for routine testing for regulatory safety evaluation. Test systems are limited to single cell type or organ (tissue slice or whole organ perfusion) and can be technically demanding and, as a result, difﬁcult to reproduce between laboratories. Replication of in vivo exposure conditions may be difﬁcult, especially for lipophilic or insoluble chemicals. Because the systems have a limited life expectancy, they are not suitable for the examination of chronic effects, especially those that accumulate gradually over prolonged exposure. Many toxicities are multifactorial and dependent on interrelationships between tissues/organs that are not readily reproducible in vitro. The pursuit of in vitro techniques should be directed at development of test methods that are acceptable to regulatory authorities as replacements for animal tests, and to focus attention on identifying toxicities in vitro that may be expected in vivo. For example, an in vitro screen may suggest potential for renal toxicity indicating the need for speciﬁc examinations in animal studies and, perhaps, inﬂuencing dose selection so as to minimize any suffering in test animals. The use of in vitro techniques can – potentially – replace “severe” procedures such as eye irritation. Successful development of these methods will lead to reductions in animal use, through gradual regulatory acceptance and reduction of the numbers of compounds entering full development. Financial beneﬁts should not be a sole reason for replacing animals but should not be ignored as a factor. It would be difﬁcult to underestimate the inﬂuence of legislation of the development of in vitro techniques, the European Cosmetics Directive and REACH being prime examples. A contrary viewpoint is given in other areas of use, such as pharmaceutical development where lack of regulatory acceptance and, it has to be said, satisfactory tests have delayed the wider adoption of some tests for certain endpoints, particularly those that are complex or multifactorial. A further boost for development of new approaches to safety evaluation has been given by the European Partnership for Alternative Approaches to Animal Testing, which was launched in November 2005. This is a joint initiative from the European Commission, and a number of companies and trade federations active in various industrial sectors to promote the development of new methods that uphold the three Rs of reﬁne, reduce, and replace, as modern alternative approaches to safety testing. The Partnership’s work focuses on a number of areas, including existing research, development of new approaches and strategies, and promotion of communication, education, validation and acceptance of alternative approaches.

96

A Guide to Practical Toxicology 2nd Edition

Broadly, the criteria for development of an alternative or in vitro method include the following: r The mechanism by which changes are induced should be well understood. r The test system should be a single target organ and/or cell type r The compound should be water-soluble, as lipophilic compounds may not gain access to the test system. The usual refuge in such cases, DMSO, has its own toxicities and should probably be used with caution. r There should be a large set of existing data that can be used in the interpretation and validation of the new test. VALIDATION OF IN VITRO METHODS Validation is a perennial problem with in vitro systems as it is often a lengthy process, the local lymph node assay taking 16 years to validate. Having said that, many would say that animal tests have not been properly validated. However, they are at least well understood and produce data that may be extrapolated to humans or another target species, which cannot be said so readily for in vitro data. Validation seeks to answer questions relating to the reliability and relevance of the method under evaluation. The European Centre for the Validation of Alternative Methods (ECVAM) and, in the United States, the Johns Hopkins Center for Alternatives to Animal Testing (CAAT) have done a lot of work on the validation of new methods (see appendix for Web sites). Validation should seek to answer questions of the following type: r Is the biochemistry and mechanism in vivo and in the proposed in vitro system fully understood? r Is the in vitro method reliably predictive for the endpoint in vivo? r Where a surrogate marker of effect is used, what is the reliability of this marker of effect in vivo? r What are the robustness, reproducibility and reliability of the method, including among laboratories? r Is the method sensitive and selective? r What is the correlation of the in vivo test results with those of in vivo methods? r Do the data mean what we believe they mean? r Have the limits of the method been investigated and deﬁned? There is an understandable tendency to validate methods with known chemicals; nephrotoxicity models are often validated with mercuric chloride or similar classic toxic compounds. Probably, the best method of validation, following exploration of the method with known toxicants, is to use it in parallel with more conventional assays so that the data can be compared when both tests have been completed. Ease of validation is likely to decrease with increasing complexity of endpoint. Genotoxicity tests have been accepted because they investigate a relatively simple endpoint in a series of robust assays that can be readily transferred among

Determination of Toxicity: In Vitro and Alternatives

97

laboratories and which are, for the most part, relatively simple to conduct. On the other hand, tests for immunological effect have been difﬁcult to devise and validate and the complexity of the endpoints studied must play a role in this. Development of new in vitro methods is seen as cutting edge research, with the bonus that it can be quite inexpensive to set up and run. The result has been a plethora of new methods proposed or new test systems examined, and it has been difﬁcult to discern any focus in the ﬁeld as a whole. In such a situation, it is essential that validation be carried out rigorously on tests that have emerged as potential replacements. As a result of this vast effort, new tests that are also viable have taken years to emerge, although some notable exceptions such as the local lymph node assay have been promulgated and accepted in shorter periods. However, part of the key to the success of this method is that it is conducted in a whole animal; the advantage over prior methodology is that it is quantitative and uses fewer animals. There is a vast range of references on validation of alternative methods, many of which may be obtained from sites like that of ECVAM or the journal in vitro Toxicology. Zeiger (3) points out that the validation process should be scientiﬁc, ﬂexible, and transparent. Validation determines the reliability (reproducibility) and relevance (quality of measurement or prediction) of the proposed test method, where appropriate, by comparison with the method it may be replacing. Naturally, judgment is essential in this process as there can be no sensible way in which values for these parameters can be ﬁxed. One of the goals of in vitro or alternative methods must be not only to replace animals, but also to make the predictions more relevant to the target species, usually humans. Thus, predictors of human effect should be validated against the human effect rather than that in a laboratory species or other surrogate. Validation is usually carried out by a number of laboratories simultaneously, using blind-labeled compounds dispensed from a central source. The results can then be examined, when all laboratories have completed their separate experiments. The experience over the last ten years or so has allowed some retrospective examination of failure (early in the process) and success (based on the experience gained in failure). Spielmann and Liebsch (4) published a useful overview of lessons learned during the validation of in vitro tests. Broadly, these authors support the methods propounded by ECVAM. They describe the validation of the 3T3 NRU (neutral red uptake) in vitro phototoxicity test as a useful example of validation success and structure. In 1991, a joint program was established by the European Commission and the European Cosmetics, Toiletry, and Perfumery Association (COLIPA) to develop and validate in vitro photoirritation tests. The ﬁrst phase involved the evaluation of phototoxicity tests established in cosmetic industry laboratories together with a then new assay, the 3T3 NRU PT test. This uses mouse ﬁbroblast cell line 3T3 in a photocytotoxicity test, which has NRU as the endpoint for cytotoxicity.

98

A Guide to Practical Toxicology 2nd Edition

A prevalidation study was conducted with 11 phototoxic and nine nonphototoxic test chemicals; the 3T3 NRU PT test correctly identiﬁed all the chemicals, a result which was subsequently conﬁrmed independently in Japan. In the second phase of the study, which was funded by ECVAM, this test was validated in 11 laboratories in which 30 test chemicals were tested blind. The results of this blind testing were reproducible and there was very good correlation between in vitro and in vivo data. Although considered to be ready for regulatory acceptance, concerns were raised that more UV-ﬁlter chemicals should have been tested. Subsequently, a further 20 chemicals evenly divided between nonphototoxic and phototoxic, were successfully tested. Finally, in 2000, the test was ofﬁcially accepted by the European Commission and published in Annexure V of Directive 67/548 EEC on the Classiﬁcation, Packaging, and Labelling of Dangerous Substances (European Commission, 2000a). This lengthy process has the clear hallmarks of success; a carefully performed evaluation of candidate tests followed by a second blind testing by a number of laboratories, all coordinated centrally. When questions were raised about its regulatory acceptance, they were answered carefully and in a similar manner to the earlier validation. Progress in evaluation of alternatives in this area continues; Leli`evre et al. (5) have reviewed favorably a reconstructed human epidermis test system for evaluation of potential systemic and topical phototoxicity. TEST SYSTEMS AND ENDPOINTS Test systems for in vitro testing range from puriﬁed enzymes and subcellular fractions such as microsomes used in metabolism studies, through single cells, isolated tissue components such as nephrons, tissue slices, and up to isolated organs such as perfused livers, kidneys, or hearts. A reﬁnement is ex vivo testing, in which an in vitro preparation is made from the tissues of animals that have been treated in life. Table 2 (6) summarizes the types of test systems that are available for in vitro experiment. Subcellular test systems have quite speciﬁc endpoints that are usually relatively easy to measure. They have prominent use in areas such as metabolism where aspects such as rate and extent of metabolism can be assessed; this is also a useful and inexpensive test system in which to assess potential species differs. Human microsomes or puriﬁed human enzymes are often used. Cultured cells are essentially available in two types; primary cultures, which are derived from a freshly killed animal (although they may be cryopreserved) and secondary cultures, which are immortal cell lines. Of the ﬁrst, rat hepatocytes and human peripheral lymphocytes are frequently used. These cells have some limitations, in that, they tend to deteriorate quickly; for instance, freshly isolated hepatocytes lose their metabolic capability over a few hours, limiting the time available for testing. Another disadvantage is that, for cells such as hepatocytes, the blood–bile duct polarity of the cell is lost in the process of producing a single cell suspension. This important aspect of hepatocyte function can be maintained by

Determination of Toxicity: In Vitro and Alternatives

99

Table 2 In Vitro Test Systems Test system type

Examples

DNA probes

Microarrays

Isolated enzymes Subcellular organelles Single cells–primary culture Single cells–cell lines

Cytochrome P450s Microsomes Hepatocytes and hepatocyte couplets tumour cell lines, Caco-2 cells, stem cell cultures The great white hope Liver or kidney Isolated nephrons Liver or heart Liver bioreactors and similar systems Potential for use of stem cells in these systems

Stem cells Tissue slices or organ components Perfused intact organs Cultures reproducing tissue architecture and function; different tissue cultures interlinked to give a “circulation”. Embryo culture Fertilized eggs Excised tissues Ex vivo studies Studies on particular tissues

Whole embryo or micromass Chicken eggs used for irritancy and corrosion prediction Bovine eyes used in ocular irritation studies Unscheduled DNA Synthesis; Comet assay Comet assay in various cell types derived from toxicity studies

Source: Adapted from Ref. 6.

the use of hepatocyte couplets, in which the biliary side of the cells is maintained in the middle space between two hepatocytes. The use of culture methods to produce blocks of cells that have some of the characteristics of the original tissue is also a technique with considerable potential. Hepatocytes can be induced to maintain functionality for several weeks when mounted in an appropriate matrix of collagenous material. There is then the possibility that such tissue blocks could be placed in connected incubators linked through a circulatory system, offering the potential for studying interactive effects. In contrast, the secondary cultures or cell lines have much longer use times but often lack the in-life characteristics of the cells from which they were derived. These cells are represented by CACO-2 cells used in in vitro assessment of absorption; however, selection of only one cell line from the hundreds available is essentially nonrepresentative and deceptive of the huge choice available. Cells may also be derived from animals in toxicity tests, for tests such as the Comet assay for DNA damage. The endpoints available for study in cells are wide ranging and include mitochondrial function, membrane integrity (assessed by leakage of markers into the

100

A Guide to Practical Toxicology 2nd Edition

culture medium), and effects on protein and DNA, quite apart from growth (division rates), plating efﬁciency, assessment of gap junction patency, viability and death. Speciﬁc cell lines have speciﬁc roles in tests used in regulatory assessments, for example, hERG cells in cardiovascular safety assessment of the potential for novel drugs to elicit cardiac effects in life and the use of Langherhan’s cells in the assessment of immune effects. In vitro experiments with cells are often associated with advanced technique beyond such simplistic endpoints as dye exclusion or enzyme leakage into the culture medium. Flow cytometry has been shown to be useful in short and long term experiments, in which various aspects of cellular function can be assessed, including mitochondrial function and cell cycle modulation. While this looks at cell populations, the characteristics of individual cells can be assessed in tests such as the hERG assay in which the potential to affect the cardiac action potential is assessed. This is an example of a test accepted, in fact required, by regulatory authorities for drug development. The subject of cells in culture should not be left without considering the potential impact of stem cells. Stem cells have two properties that are attractive to the toxicologists; they reproduce themselves identically and they can give rise to different cell types, such as heart, liver, kidney, or pancreatic islet cells. There are two basic types of stem cell—embryonic stem cells and adult stem cells, which go by a variety of names. Davila et al. (7) carried out a review of the use of stem cells in toxicology and concluded that they have considerable potential in toxicity testing. If a range of human derived cell lines that are similar in every respect to their tissue analogs can be produced, and if these cells can be used in assays that are reproducible, their impact could be immense. In particular, these authors single out hepatotoxicity and cardiac effects (QT prolongation) could be beneﬁciaries of the use of stem cells. Although such cells have huge potential in toxicity testing, it should be remembered that the cells that are derived should be reproducible. There is little sense in deriving hepatocytes from a stem cell line on several occasions, if the cells that result each time are different in subtle ways. An immortal culture of human hepatocytes that maintained its metabolic capability without change, is likely to be more useful than a multiple derivation of hepatocytes from stem cells that are not the same each time. Tissue slices have the advantage that tissue architecture is maintained, although exposure of the cells to the test item may be limited to the outer layers of the slice and luminal spaces, such as renal tubules may be collapsed. In addition, the surfaces represent areas of damage. Although their lifetime has been limited, this problem is being surmounted in culture systems, which can extend the life of the slices for several days during which exposure can be continued. Liver and kidney are favorites for this type of test system but other tissues such as lung can also be used. Liver slices can be maintained for up to a week in some systems and the decline of biomarkers, such as enzymes, measured in the slices and/or in the culture medium, which is replaced every 24 hours. It is possible to detect change in clinical chemistry parameters, such as marker enzymes and in histology

Determination of Toxicity: In Vitro and Alternatives

101

including proliferative changes, or those associated with storage of substances such as glycogen. With such systems, it is relatively easy to carry out comparisons between species. Isolated tissue components, for example, nephrons, pose more of a technical challenge and are not used to the same extent as other in vitro systems. While the renal nephron may be technical challenge to isolate, other tissue components are used more frequently. These include use of papillary muscles from guinea pigs and Purkinje ﬁbers from various species in cardiac safety pharmacology investigations. Cardiac testing also makes use of isolated perfused hearts, notably in Langendorf’s preparation, which uses a rabbit heart. Other organs used regularly include the liver and kidney but, given sufﬁcient skill to connect them to a perfusate, there is little reason why other organs should not be used in perfusion experiments. At this point, we start to consider alternative systems that do not use vertebrates. Fertilized chicken eggs have been used in embryo toxicity screening and in assessment of irritation and corrosion. Hydra has also been used in reproductive toxicity screening for embryological effects, but it is fair to say that this has not been as widely adopted as the other reproductive screens. Looking at other invertebrates, it is clear that the pupa of most insects goes through a process of re-organization and organogenesis that is probably disruptable by reproductive toxicants; I am not aware of any research on this, however. The ﬁnal type of in vitro test is that which takes a whole animal, treats it with the test substance on one or more occasions, and then uses part of that animal in an in vitro test. These are often extensions of in vitro tests. Two such tests, the UDS and Comet assays can be performed on cells treated in vitro. However, there is some elegance in allowing the full organism access to the chemical for a period of hours and then isolating appropriate cells from its tissues and assessing effects that may have occurred. TOXICITY IN SILICO Much attention is currently focused on genomics, toxicogenomics, and proteomics, which, respectively relate to the expression of genes in normality, gene expression following toxic exposure and protein expression as a result of gene activation. These have been termed toxicity in silico techniques because they are dependent on chemical reactions with molecules, such as DNA, bound to silicon microarrays, in contrast to more conventional in vitro methods that show a time-dependent response. This follows the recognition that mechanisms of toxicity are reﬂected by the proﬁles of the genes expressed in response to the toxic insult; protein expression is consequence of gene activation. The use of DNA microarrays in which thousands of DNA probes or synthetic oligonucleotides are mounted on a chip in a known order and then hybridized with target DNA, is able to determine which genes are activated in target tissues as a result of a toxic exposure. It has been shown that the protein expression proﬁle is associated with effect and mechanism of toxicity and that these proﬁles are broadly similar within each group

102

A Guide to Practical Toxicology 2nd Edition

of compounds that, in life, have similar effects and mechanism. However, within each group, each compound has its own distinct proﬁle of protein expression. By setting a desired proﬁle or indicating thresholds for decision, compounds can be selected or rejected for further development. The use of these techniques needs careful consideration of objectives before committing to a system that is likely to be expensive to buy and maintain, and may be difﬁcult to alter. Genomics offers the possibility of use of open or closed systems. In the former, the endpoint is not speciﬁed and all genes expressed can be highlighted as a pattern of spots on the array. In the latter, a speciﬁc number of genes, for instance, a few hundred, may be investigated, giving a pattern of effect in these target genes. In contrast to genomics, protein expression can (currently) only work as an open system in which all proteins are examined. Because of the vast amount of data that are generated using these techniques, pattern recognition software is important in interpretation of the data. Protein and gene expression both change with time, and the number of genes expressed a few hours after exposure may be an order of magnitude greater than that at one hour. Both proteomics and genomics offer a snapshot of the effects of the compound at a particular time point and do not reliably show the past or the future. Choice and consistency of time point is therefore important in ensuring that the data generated contain enough information – but not too much – to achieve the experimental objective. The study of proteins expressed is a reﬂection of what is happening in the cell, whereas the pattern of gene expression is a reﬂection of potential. Both techniques are, however, necessary to give a full picture of what is happening. Genomic and proteomic expression both produce patterns of effect that may be associated with particular toxicities. This principle is also exploited in the use of nuclear magnetic resonance spectroscopy, which can be used to reveal the amounts of small molecules (up to a molecular weight of 600) in a biological ﬂuid, especially urine. The readouts from this can carry 3000 vertical lines, each speciﬁc for a particular chemical, such as citrate or hippurate. The problem is that there will be simultaneous changes in the quantities of many endogenous metabolites, quite apart from those due to the test compound. Sorting these data and then using appropriate software to plot them is an important part of the process. One aspect of this technology, which has been around for a long time, albeit without the patternrecognition software to make it more universally useful, has been the name given to it—metabonomics. If there is not much debate about the utility of the technique, there is a fair amount of speculation on how to pronounce it correctly. A signiﬁcant strength of these pattern-based techniques is their potential, when used as open systems, to show changes that may indicate toxicities due to novel mechanisms. However, they cannot show what the mechanism of toxicity is and further investigation, which could be prolonged, would be needed. The problem here is that compounds showing novel patterns of change are likely to be dropped from development and not investigated further, unless the pattern is common to the members of a promising series of compounds. This may

Determination of Toxicity: In Vitro and Alternatives

103

represent a missed opportunity for examining new mechanisms of toxicity that could be of signiﬁcance in humans. Many successful, but toxic, compounds with acknowledged beneﬁts might have been dropped from development if such techniques had been used for them. Such knowledge might prevent some of the more unpleasant surprises of chemical development and marketing but, equally, is probably responsible for the rejection of compounds, which may have beneﬁt despite toxicity. The basic tenet, that chemicals can induce a particular proﬁle of protein expression, is a useful one. The proﬁles produced by investigational chemicals may be compared with those from a library of known toxins, as an indication of anticipated effect. The weakness of this, and similar systems, is that they are critically dependent on the size and content of the database against which the proﬁles are compared. Inherently, it is unlikely that new types of toxicity can be predicted by this type of database-dependent system, because their discovery is dependent on their presence in the database for previous compounds. Much trouble is caused by unexpected or novel effects, which become apparent following signiﬁcant human exposure and which are not predicted by routine screening techniques. The possibilities for comparing members of a series is very good, however, if the effects of the ﬁrst few members have been adequately characterized. The interest in these technically demanding and expensive technologies is based on their perceived potential as methods of early rejection of compounds from development. The savings in time, laboratory space, animals, and expense could be signiﬁcant. However, for medicines at least, it should be appreciated that many successful drugs have signiﬁcant toxicities that were found in preclinical development. In so far, as drug development is an art, part of this art is to assess the relevance and impact of these effects and to judge if the drug can be used beneﬁcially in appropriate patients. The basis on which compounds are rejected or selected must be chosen in advance; otherwise, indiscriminate rejection may limit the development of effective chemicals—medicines or pesticides—in the future. As with many such systems, it is usually better to reach a decision on the basis of several strands of data. Kramer et al. (8) examined the integration of genomics and metabonomics data by treating rats with single doses of ﬁve known drugs or vehicle. They looked at urine samples collected up to 168 hours after using NMR, and gene expression proﬁles were determined in livers on four occasions up to the same time. Traditional data were collected in the form of clinical pathology on urine and serum samples. There was good correlation between ketone bodies monitored in urine and expression of genes involved in ketogenesis, when a PPAR agonist was tested. They also found that while one technique alone could not separate low dose from control, this could be achieved by using both genomics and metabonomics together. Given that one of the great challenges in toxicity testing is to determine the signiﬁcance of small differences, this technique may have utility in the long term for application in toxicity studies.

104

A Guide to Practical Toxicology 2nd Edition

COMPUTER PREDICTION SYSTEMS There has been huge interest and effort in developing expert systems that can predict toxicity. These are based on the basic tenet that structure deﬁnes activity and that the reaction of a chemical with a biological system is driven by its molecular structure. There are, essentially, two types of expert system based on structure activity relationship (SAR), one is quantitative (QSAR) and the other is qualitative (SAR). The latter type is knowledge based and depends on the writing of rules that describe known behavior of structural groups in a given context. They are dependent on recognizing structural groups that may be toxicologically active, such as aldehydes or aromatic amines. These systems may be transparent in that the reasons an alert is triggered may be accessed together with literature references to support the conclusion. This transparency contrasts with the production of numbers of dubious reliability and utility by opaque processes. The prediction of complex endpoints such as lethality by mathematical means is fraught with difﬁculty, and has been shown to be hopelessly inaccurate in many cases. The success of both types of system is critically dependent on the databases and rules used to underpin them and the mathematical algorithms that are used to calculate descriptor parameters such as LogP. These systems are considered in more detail in chapter 12 on the prediction of hazard. The following sections look at areas of application of in vitro testing, ﬁrstly, in terms of target organ toxicity and then by ﬁeld of application. These areas have been chosen in the knowledge of the requirements of pharmaceutical development, however, they illustrate the broad potential for in vitro testing and research.

TARGET ORGAN TOXICITY The early determination of target organ toxicity in vitro is an essential factor in the decision processes that determine which compounds should be developed and which should be dumped immediately. Put like that, it would seem that the detection of toxicity in a particular organ in vitro should be the death knell of any compound; however, this should be viewed dispassionately in the context that such decisions should be taken from a broad database and not on the basis of a single test. So, the aim should be to rank candidate compounds according to effect and to take decisions based on as wide a set of data as possible. Expression of toxicity at unexpected target sites, or at unexpected intensities, by drugs or other chemicals has been a major factor in their withdrawal from the market. While clinical human toxicity at major target organs may be readily predicted from appropriate nonclinical studies, some target organs may be less easily predictable. For instance, cerivastatin (Baycol), a statin intended to reduce cholesterol levels, showed an unexpected risk of rhabdomyolysis (severe muscle damage) especially when used at a high dose or with gemﬁbrozil, another lipid regulating agent. It is unlikely that such an effect would be predicted by any of

Determination of Toxicity: In Vitro and Alternatives

105

the routinely used test systems, particularly those in vitro as there is unlikely to be any routinely used test for such an endpoint. The diversity of toxicological endpoint will always be a massive hurdle to successful prediction of target organ effect from in vitro assays, covering single effects or mechanisms. Liver This is probably the organ in which most effort has been invested in in vitro toxicological testing. This is because, it is readily accessible from a number of species, including humans, and it is a major site of metabolism and elimination of xenobiotics and, as a result, toxicity. In addition, it is a relatively large discrete organ unlike others, such as the adrenal (discrete but very small) or the immune system (extensive, complex, and diffuse). Physically, it is easy to work with; the cells may be readily dissociated into primary cultures of singles cells, the organ may be sliced with precision and the slices used in experiments up to several days, and it is relatively easy to perfuse. Of these options, single cells have been the most popular. However, they lose the blood to bile polarity of the hepatocyte in life, although this can be maintained if hepatocyte couplets are used. Although subcellular systems are used including puriﬁed enzymes and microsomal preparations, as we will see in the section on metabolism below, hepatocytes have the advantage that they are a fully functional cell complete with membranes and intracellular relationships. Another subcellular system that is regularly used is S9 mix, derived from the livers of rats, treated with an enzyme inducer, and used in genotoxicity studies where metabolic activation of test substance is necessary. Kidney The options for the kidney mirror those for the liver, with the additional possibility of isolating entire nephrons, glomeruli, or fragments of proximal tubule. In terms of structure and cell type, the kidney is more diverse than the liver and so a suspension of cells obtained by enzymatic dissociation will not be homogenous. If cells are isolated from the proximal or distal tubules, they can be used to study transport systems that can be inhibited by substances such as probenecid or quinine. As with the liver, there is a range of derived cell lines that can be studied. Nervous System The nervous system presents more of a problem, given that its principal function is to transmit electrical impulses or transfer small amounts of quickly decaying chemicals at synapses between neurons or other receptors such as those on muscles. Some of the endpoints are the same as those for other single cell systems, such as cytotoxicity, apoptosis, and proliferation. More speciﬁc endpoints include electrophysiological aspects such as ion channels; enzyme studies can include acetyl cholinesterase and other markers of effect. The brain is suitable for study

106

A Guide to Practical Toxicology 2nd Edition

in tissue slice preparations and it is possible to isolate the various cell types for individual study. The drawback of these techniques however, is that change in one aspect of this complex system does not necessarily directly correlate with effects in life. Immune System The immune system is a complex and diffuse set of tissues and cell types that is distributed throughout the body. While certain tissues are clearly closely associated with it, such as the thymus and lymphoid tissues generally, others do not have such obvious connections. The lung may not have an immune function as such, but it is home to a population of immunosurveillance macrophages. Other immune response systems are contained in the blood in the form of immunoglobulins and proteins of the complement cascade and the various populations of leukocytes, the numbers of which vary rapidly according to a variety of immune stimuli. The immune system plays a central role in the body’s responses to foreign proteins or to proteins that have been linked covalently to smaller molecules to form haptens. These go on to be presented to the appropriate cell to elicit a response, which can be devastatingly quick and sometimes fatal. One particular problem is the dissimilarity between animal and human immune systems, making the prediction of whole body human effects by extrapolation from parts of animal immune systems in vitro, especially tricky. One endpoint that would be of clear interest for a viable, predictive (and preferably simple) in vitro assay is sensitization. This is responsible for a great deal of occupational disease and ill-health and, given the history of less than perfect predictivity of animal models such as the guinea pig, the interest in an alternative animal free model has been intense. This has been somewhat alleviated by the regulatory acceptance of the local lymph node assay, but this is still an animal based test, although it is considered to be objective and predictive. Sensitization is a complex process, which is difﬁcult to mimic in vitro. More than one cell type is involved and the mechanism is complex and not well understood. As a further complication for in vitro testing, the chemicals that trigger sensitization are not always water-soluble. In fact, they are usually lipophilic with reactive groups, which can form haptens with endogenous proteins. However, progress is being made towards developing viable test systems using human cell lines and a viable system is likely to emerge in the next year or so. Other Organs As a general inconvenience, chemicals do not always target one of the major tissues reviewed brieﬂy above. One of the results of enzyme induction in the rodent liver is thyroid follicular hypertrophy, which can lead to thyroid tumours, if allowed to persist. This may be characterized as an indirect effect due to liver change and has been generally regarded as not being relevant to humans. However, direct effects on the thyroid are possible and alternative tests have been devised

Determination of Toxicity: In Vitro and Alternatives

107

to assess this. One example has suggested the use of tail resorption in the tadpole of the frog, Xenopus laevis, a species which has also featured in reproductive toxicity testing (9). In this work, treatment of tadpoles, in the early stages of metamorphosis, with inhibitors of thyroid hormone synthesis was associated with a concentration-related delay in development, and the authors suggest that this may be indicative of a viable test system for thyroid axis disruption. The lung is another target organ, which can be studied in vitro, either by perfusion, isolation of cell types, or as tissue slices. As with the liver, it is now possible to treat these slices for several weeks and to detect change that takes place over that period. It is clear that there will be progress in the development of new techniques to examine toxicity to various tissues in vitro over the coming years, and that anything written now will soon be out of date. However, although it is now possible to examine the effects on individual tissues over periods up to several weeks, the next challenge will be to examine the relationship between these effects and other tissues, which are relevant to toxicity in vivo. Minor shifts in homeostasis in one organ can lead to major change in others, and it is these insidious and progressive toxicities that represent one of the biggest challenges in toxicity assessment. FUNCTIONAL TOXICITY TESTING The following sets out to review tests for functional change; the order in which these have been reviewed is unashamedly derived from the order in which the various sections of a pharmaceutical registration package are presented. However, this is a handy method of illustrating the diversity of technique and test system that is available. For the most part, I have not attempted to describe methods because this is intended to be no more than a brief review of each area; more details may be given in the main chapters, which address them. The exception to this is the alternative methods such as those for skin and eye irritation, where a little more detail has been given. PHARMACOLOGY AND SAFETY PHARMACOLOGY IN VITRO Pharmacology, which is essentially a branch of toxicology, albeit generally conducted at lower doses or exposure concentrations, has immense potential in terms of in vitro experimentation. This is because there is usually only one endpoint or, at least, a series of closely linked endpoints manifested in a single cell system, tissue slice, or perfused organ. In what might be called general pharmacology, as opposed to safety pharmacology, there is a range of routinely conducted assays, including studies of receptor inhibition, in which a known bank of up to 60 receptors is incubated with the test compound to determine, for example, binding afﬁnities or inhibition concentrations (IC50 ). In safety pharmacology, the use of the hERG assay and various cardiac preparations has been reviewed above; however, this area is constrained by regulatory oversight and

108

A Guide to Practical Toxicology 2nd Edition

innovation is perhaps not as quick as in other areas. While cardiac function is covered to some extent by the hERG assay and its relatives, there is currently no in vitro alternatives for renal, respiratory, or nervous function. This should not rule out the development of screening assays, which may become accepted eventually. METABOLISM The main areas where in vitro techniques in metabolism can contribute significantly to chemical toxicity assessment are drug interactions and comparative metabolism. Both these areas can be investigated in the same systems, namely, puriﬁed enzymes, microsomes, or hepatocytes. Tissue slices may also be used but do not seem to be so popular. In a number of recent cases, where a drug has been withdrawn from the market, the reason has been found to be due to inhibition or acceleration of the metabolism of one drug by another. It is especially useful to know about the potential inhibition of the cytochrome P450 enzymes, particularly CYP3A4. Ketoconazole is a potent inhibitor of CYP3A4 and interacts with terfenadine, which was withdrawn due to effects on the electrocardiogram, seen as QT prolongation resulting in torsade de pointes. Cisapride is another inhibitor of CYP3A4, which was withdrawn for similar reasons. It is clear that inhibition of these enzymes is a critical element in drug toxicity and safety assessment, and early detection is the best way of devoting precious resources to the best available molecules. Comparative metabolism is undertaken relatively early in development of chemicals and is a useful method of assessing which would be the best second species to be used in a full program of toxicity studies. Hepatocytes or microsomes prepared, typically, from rats, dogs, monkeys, and humans are incubated with the test chemical to determine rate of elimination of the parent and, with radiolabelled material, the appearance and identity of metabolites. Other species such as mice and minipigs can also be used. Studies of this type have helped to reduce animal use by cutting out studies in inappropriate species. KINETICS The overall kinetic behavior of a chemical in the body is the result of four basic processes, absorption, distribution, metabolism, and elimination. This can be more simply viewed as the interactive effects of absorption and clearance, which for convenience is usually expressed as clearance from the central compartment; i.e. the blood. CACO-2 cells, a cell line derived from human adenocarcinoma, have often been used in in vitro assessment of absorption, although there is no simple correlation between CACO-2 cell permeability and human gastric absorption. Some idea of their reliability may be obtained by reference to physicochemical parameters. Clearance can be assessed using hepatocytes in a targeted variation of metabolism studies described above.

Determination of Toxicity: In Vitro and Alternatives

109

TOXICITY TESTING In a limited sense, toxicity may be tested in cell lines using a number of endpoints as touched on above. These include dye uptake or exclusion (neutral red or trypan blue, respectively), growth, viability, enzyme leakage into the culture medium, and so on. While it has been a long standing complaint that long-term exposure was not really possible in vitro, the advent of tissue slice techniques which allow treatment over a period of weeks, is likely to be an important advance. The disadvantage will continue to be, however, that these single tissue systems lack the relationship with other tissues that may mitigate (or increase) the toxic effects of the chemical under study. CARCINOGENICITY There is huge potential for evaluation of carcinogenic potential by in vitro testing. It is relatively simple to detect a genotoxic carcinogen; the challenge lies in assessing the potential for nongenotoxic carcinogenicity. Having said that, it is apparent that the lines between the two old certainties—genotoxic and nongenotoxic— are becoming increasingly blurred. This demonstrates the fact that if the choices appear to be black and white, it simply means that the grey nuances in between have not been discovered or understood yet. There is a range of nongenotoxic mechanisms that should be susceptible to in vitro investigation, some of them relatively simple but fundamental. J. E. Trosko has long advocated a test in which gap junction patency is investigated, the basic theory being that a cell that does not communicate with its neighbors is likely to be shut off from regulatory processes, and thence, to become cancerous. Another relatively simple endpoint that is likely to repay regular investigation relates to epigenetic factors, such as the levels of methylation of DNA, which affects gene expression, which is, in itself, another area for exploration through techniques such as microarrays and genomics. One problem for any form of carcinogenicity testing, including tests using animals, is that the actual impetus for the cancer may be a small perturbation of a physiological balance that is not clinically obvious, but which has long lasting effect on the homeostatic status of tissues or individual cells. The detection of such small change is very difﬁcult at the moment, for a variety of reasons, particularly background noise that obscures the treatment-related response (see chapter 2, “Normality,” for further information); this is a potential growth area for in vitro testing. The future of carcinogenicity testing is considered in more detail in chapter 7. REPRODUCTIVE TOXICITY While it is possible to culture cells from the testis or other reproductive organs, the main effort of research into in vitro techniques has concentrated on developmental

110

A Guide to Practical Toxicology 2nd Edition

toxicity as an endpoint, if such a complex phenomenon can be reduced to the singular. Although a number of techniques have developed, the main ones are the whole embryo culture assay and the limb bud or micromass assays. Other systems have been tried at intervals, including Hydra and fertilized hens’ eggs; Xenopus has also been investigated but not taken much further at the moment. In addition, other models may be useful, including invertebrates and ﬁsh. Embryonic stem cells also offer opportunities for test development. Further details of some of these tests are given in the chapter on reproductive toxicity testing. IRRITATION AND CORROSION This is an area of testing where there has been huge effort in the development and validation of new methods, which have often included commercially available test systems. Irritation is a reversible, nonimmunological inﬂammatory response produced at the site of contact, while corrosion is the production of irreversible damage at the contact site as a result of chemical reaction. Given these relatively simple deﬁnitions, it might be supposed that development of reproducible humanrelevant tests would be simple. Unfortunately, this has not been the case, in part due to the complexity of the tissues being investigated, especially the eye, for which irritation testing is still an important target. Given the emotive nature of testing in the eyes of animals such as rabbits, the development of reliable test methods has been a priority, which is beginning to show success. For ocular irritation, various models are available, either derived from animals such as excised eyes of rabbits or cattle, or those not immediately animal-based such as commercial test systems. In addition, models using fertilized hens’ eggs, for example, the Chorioallantoic Membrane test, have been evaluated with some success. Testing for irritation and corrosion is looked at in more detail in chapter 8. PHOTOTOXICITY This is a long-standing endpoint, which has been of interest to groups as diverse as celery pickers, psoriasis patients receiving psoralen plus ultra violet A therapy, to users of aftershave. The validation of the 3T3 NRU PT test has been described above and other methods are in development. ECOTOXICOLOGY This is another area, which is greatly inﬂuenced by the regulatory impact of REACH in Europe. As an illustration of the approaches used, Zurita et al. (10) reported on the ecotoxicological evaluation of diethanolamine using a battery of microbiotests. Their tests systems included bacteria for the inhibition of bioluminescence, algae for growth inhibition, and Daphnia magna for immobilization, while a hepatoma ﬁsh cell line was used for a variety of toxicological endpoints

Determination of Toxicity: In Vitro and Alternatives

111

such as morphology, viability, and metabolic studies. Perhaps inevitably, the frog Xenopus has also been used in ecological risk assessment. PITFALLS IN IN VITRO TOXICOLOGY The basic challenge with any in vitro technique is interpretation of the data in relationship to the animal from which the system was derived and then, if needed, extrapolation to humans. The absence of interaction between organs or tissues and the static nature of many (older) systems means that some effects are seen that would be absent in life. Complications become evident if simple systems are used in vitro, in isolation from modifying inﬂuences such as transporter systems, blood circulation, other cell organelles, or fractions that may be important in vivo. Concentrations tested should be relevant to those expected in life, e.g., in toxicity studies or clinically. Also the transient nature of most in vitro systems means that chronic administration and the detection of progressive effect is not possible. These test systems are often technically demanding and difﬁcult to reproduce from one laboratory to another. An additional factor to consider is the sheer volume of data that are produced by some of the new techniques and the consequent requirement for suitably validated pattern-recognition or data-plotting software. Where the software “cleans” a data set to simplify a data plot, there should be conﬁdence that the correct data are being excluded; otherwise, useful information may be lost. As already pointed out above, the choice of time-point can be critical in achieving data that can be analyzed to best advantage. In the absence of good validation work, the signiﬁcance of the differences seen may be misinterpreted and erroneous conclusions drawn. If the mechanism is not understood correctly and the meaning of the data is not clear, there is no point in doing the test, except as part of a validation exercise. It is clear, in these cases, that these unproved systems would be totally unsuitable for toxicity prediction or safety evaluation. FUTURE UTILITY The future of in vitro toxicology was reviewed in 1997 by a working party of the British Toxicology Society (11). Subsequently many reviews on the future of in vitro testing have been published, especially by ECVAM, including a major review edited by Worth and Balls (12). The whole approach is put in perspective, however, by the fact that this “nonanimal” based report recommends tests such as whole embryo culture, for which freshly killed animals are required, albeit not treated in vivo. One of the areas of particular interest with in vitro techniques is their potential to replace mammalian tests in areas such as pharmacology and quality testing. The prime example of this is the LAL test, which exploits the sensitivity of amebocytes from Limulus, the horseshoe crab, to detect pyrogens in solutions for infusion; it is signiﬁcantly more sensitive than the rabbits it replaces. Pharmacological models increasingly use in vitro techniques, such as the use of human

112

A Guide to Practical Toxicology 2nd Edition

cloned potassium channels for assessment of the potential for prolongation of the QT-interval of electrocardiograms. Other applications of in vitro techniques are discussed under the relevant sections below, particularly reproductive toxicity, genotoxicity, and irritancy and corrosivity. The last two have frequently been associated, in the past, with unacceptable animal suffering, particularly in the eye irritation tests in rabbits. As a result, there has been considerable effort expended in ﬁnding viable alternatives, the challenge being to reproduce the complexity of the situation in the living eye in the context of in vitro simplicity. The early work with Xenopus is illustrative of the imaginative thinking that is being applied to the development of alternative strategies for safety evaluation. The downside of this is that, no matter how imaginative the ﬁnal battery of assays, covering the whole gamut of toxicological endpoints in vitro will be time consuming and probably expensive. In addition, due to the absence of organ interactions in current in vitro systems, the search for an all embracing system of in vitro tests is likely to be unsuccessful for the foreseeable future. However, they can be used to ensure that the animal tests that are ﬁnally needed are performed according to the most efﬁcient design possible with the most appropriate endpoints studied. Regulatory acceptance is a critical area for success in this ﬁeld. Unless those in regulatory authorities can be persuaded that a new technique is a good model for effects in man (or any other target species), they are quite right to demand more information. This has come to be more carefully supplied in the form of rigorous validation protocols, which have seen acceptance of an increasing number of techniques in recent years. In the context of the three Rs of Russel and Burch, these techniques hold out an almost mystical promise of a world of safety evaluation and testing that does not depend on animals. The problem is that they are often considered in an emotional sense, which ignores the wider context of the purpose of testing. A dispassionate, scientiﬁc approach is more likely to lead to abandonment of experimental protocols such as the 2-year bioassay for carcinogenicity in rodents, which uses hundreds of animals and can take up to 36 months. OVERVIEW In vitro techniques have enormous potential that will be realized with increasing effect, leading to gradual regulatory acceptance of validated tests that have been shown to have relevance to prediction of human hazard. Their basic weakness and strength is the limited number of endpoints that can be covered in a single system in comparison with a whole animal, in which all the interrelationships between tissues and organs are intact. However, ethical pressures together with the increasing constraints of cost and time will drive development of these techniques forward. Ultimately, they will come to play a more central role in safety evaluation.

Determination of Toxicity: In Vitro and Alternatives

113

REFERENCES 1. Snodin DJ. An EU perspective on the use of in vitro methods in regulatory pharmaceutical toxicology. Toxicol Lett 2002; 127:161–168. 2. Russell W, Burch R. The Principles of Humane Experimental Technique. Universities Federation for Animal Welfare (UFAW); New Ed edition (May 1992). Also available at http://altweb.jhsph.edu/ 3. Zeiger E. Validation and acceptance of new and revised tests: A ﬂexible but transparent process. Toxicol Lett 2003; 140–141: 31–35. 4. Spielmann H, Liebsch M. Lessons learned from validation of in vitro toxicity test: From failure to acceptance into regulatory practice. Toxicol In Vitro 2001; 15(4– 5):585–590. 5. Leli`evre D, Justine P, Christiaens F, et al. The episkin phototoxicity assay (EPA): Development of an in vitro tiered strategy using 17 reference chemicals to predict phototoxic potency. Toxicol In Vitro 2007 21(6):977–995. 6. Woolley A. A Guide to Practical Toxicology, 1st ed. London: Taylor and Francis, 2003. 7. Davila JC, Cezar GG, Thiede M, et al. Use and application of stem cells in toxicology. Toxicol Sci 2004; 79: 214–223. 8. Kramer K, Patwardhan S, Patel KA, et al. Integration of genomics and metabonomics data with established toxicological endpoints. A systems biology approach. Toxicologist 2004; 78(1 S):260–261. 9. Degitz SJ, Holcombe GW, Flynn KM, et al. Progress towards development of an amphibian-based thyroid screening assay using Xenopus laevis. Organismal and thyroidal responses to the model compounds 6-propylthiouracil, methimazole, and thyroxine. Toxicol Sci. 2005; 87(2):353–364. 10. Zurita JL, Repetto G, Jos A, et al Ecotoxicological evaluation of diethanolamine using a battery of microbiotests. Toxicol In Vitro 2005; 19:879–886. 11. Fielder RJ, Atterwill CK, Anderson D, et al. BTS working party report on in vitro toxicology. Hum Exp Toxicol 1997 Nov;16(Suppl 1):S1–S40. 12. Worth AP, Balls M. eds. Alternative (non-animal) methods for chemicals testing: Current status and future prospects. ATLA 2002; 30(Suppl 1):125.

5 Safety Pharmacology

INTRODUCTION This is a brief review of safety pharmacology as required for the development of most types of pharmaceutical under the guidelines promulgated by ICH—The International Conference on Harmonization of Technical Requirements for Registration of Pharmaceuticals for Human Use. Although I have referred extensively to the text of these guidelines, I have also attempted to put safety pharmacology in its proper context in terms of practice, interpretation, and the pitfalls that may be encountered. A review by Redfern et al. (1) helps to put the subject more deeply into context and is a very useful text. Safety pharmacology is a relatively new discipline in pharmaceutical development that has emerged over the last 10 to 15 years, starting in the 1990s. In 1991, the Japanese Ministry of Health and Welfare issued a guideline for general pharmacology, which included studies to detect unexpected effects on the function of major organ systems. The intention was to encourage companies to carry out a series of tests from a ﬁrst tier and then to use suggested tests from a second tier to investigate any effects. At this point, it is useful to draw a distinction between safety pharmacology and what may be characterized as the investigation of the intended pharmacology of the compound under test—in other words, an estimate of its potential clinical efﬁcacy. In current parlance, “primary pharmacodynamics” refers to studies exploring the mode of action or effects of a substance relative to its intended therapeutic target, while studies of “secondary pharmacodynamics” examine modes of action that are not related to the intended target. Historically, both these areas of experiment have been referred to as general pharmacology. Safety pharmacology is a reﬁnement of secondary pharmacodynamics in that it looks typically at a deﬁned set of organs (as detailed in the core battery) and tends to ask more general questions of test systems (although some 115

116

A Guide to Practical Toxicology 2nd Edition

are very speciﬁc, as we shall see). ICH guideline S7a (2) deﬁnes safety pharmacology as “those studies that investigate the potential undesirable pharmacodynamic effects of a substance on physiological functions in relation to exposure in the therapeutic range and above.” The overall intention is to identify effects of the kind that have led to the withdrawal of successful drugs from the market, sometimes after many years of marketing. One of the challenges to this intention is that some serious reactions to drugs are idiosyncratic and will not be identiﬁed by any of the nonclinical studies, including safety pharmacology. Safety pharmacology, therefore, is not a catchall discipline infallibly weeding out dangerous drugs; however, when used critically, it can be a useful tool in the risk assessment process that leads to the authorization to market a new drug. These studies may also highlight effects that may be expected in cases of human overdose. The purpose of safety pharmacology studies, in the context of drug development, is to support ﬁrst administration of novel drugs to man, usually healthy human volunteers. The main reason for their conduct is the avoidance of lifethreatening side effects that can be elicited even by drugs that are on the market. This means that, in normal circumstances, the core package of studies should be completed before the ﬁrst trial in man as recommended in ICH S7a. Follow-up studies may be conducted subsequently, but the normal regulatory requirement is to do the core package early in drug development. GENERAL PRINCIPLES In most safety pharmacology experiments, exposure of the test system is transient, either as the result of a single dose in vivo or through a deﬁned incubation period in vitro, perhaps at rising concentrations. An exception to this is when safety pharmacological investigations such as behavioral studies or respiratory evaluation are added to the investigations conducted in an otherwise normal toxicity study. Safety pharmacology studies are used to investigate undesirable effects on organ function that may have relevance to human safety. The key word here is “relevance,” and there has been an often-acrimonious debate as to what exactly constitutes a relevant effect, or what is an acceptable safety margin between effect and anticipated human exposure levels. In most cases, the severity of the indication has to be taken into account, greater risk being acceptable with more severe indications such as cancer or other life-threatening conditions. As always with guidelines, the dictum is to use appropriately selected test methods and systems according to the expected effects of the chemical under investigation, while at the same time, taking note of the guideline suggestions of appropriate organs for investigation. Thus, effects may be expected or reasonably anticipated due to the intended pharmacological target (for example, proconvulsive effects in anticonvulsive agents) or effects that are not due to the intended pharmacological action, for example, QT prolongation and cardiac effects in a variety of noncardiovascular drugs, such as the antihistamine terfenadine or the antipsychotic

Safety Pharmacology

117

haloperidol. The evidence from secondary pharmacodynamic studies may be used in the selection of tests, test systems, and in the overall interpretation. The guidelines give some indications of test species, saying that they should be chosen according to relevance to man, in terms of metabolism, pharmacological sensitivity to the class of compound, and so on. Although this would seem to give a broad choice, the palette of possibilities is in fact limited by convention and practicality. It may be considered that an exotic species of animal may be a good model for a particular effect or pharmacological target, however, proving that this is valid and scientiﬁcally justiﬁable is likely to be time-consuming and expensive. In addition, regulatory authorities tend to be (rightly) conservative in these matters, meaning that test system choice is made mostly from a number of wellestablished in vitro systems and whole animals or excised organs from well-known laboratory species such as the mouse or rat and, more rarely, the dog or nonhuman primate. TESTS TO BE CONDUCTED The ICH S7a guideline is careful to say that it offers recommendations for safety pharmacology studies and, by implication, that the guidelines offered are not the equivalent of boxes that must be ticked. As ever, though, if there is not some sort of study of an indicated endpoint or organ system, a scientiﬁcally supportable reason should be given for its absence. While the guideline is at pains to say that a rational approach to selection and conduct of safety pharmacology studies should be used, the fact that it exists is the driver for much safety pharmacology. The unspoken philosophy is often, apparently, to ﬁt the test program to the regulatory framework rather than to look for a testing paradigm that is relevant to the compound. Such an approach is shallow and thought must be given to justify the proposed testing program. Sufﬁce it to say, if your compound does not ﬁt the pattern, the reasoning for selection of tests or their omission has to be scientiﬁcally supportable. One useful principle to consider is not to do a test that makes no scientiﬁc sense; for example, there is likely to be little need to do a study on gastrointestinal (GI) transit time for a compound applied dermally for a skin condition, providing absorption into the systemic circulation is known to be low. For compounds such as antibodies with very speciﬁc receptor targets, it may be enough to monitor pharmacology endpoints during the toxicity studies. However, the context of the test compound in relation to its chemical class and mode of action must be considered before deciding against safety pharmacology tests; if the compound is from a new class or has a novel mode of action, it is more likely to require testing than if it is from an established class with known pharmacological effects. The comfort zone offered by convention and precedent is as strong in safety pharmacology as in other areas of toxicology and the use of known methods and protocols will always be preferred to novel, unvalidated, and unfamiliar tests. Having said that, however, the guideline indicates that the use of new technologies and methods is encouraged provided the principles are soundly based.

A Guide to Practical Toxicology 2nd Edition

118

The objectives of these studies are cited in ICH S7a as the identiﬁcation of undesirable pharmacodynamic properties relevant to human safety, to evaluate effects seen in toxicity or clinical studies, and to elucidate the mechanism of such effects, whether expected or observed. Most of the tests conducted routinely are deﬁned by well-established protocols and generally there is little change to these, unless there is good reason to modify the design. The text in Box 1 has been compiled using the ICH S7a guideline, which forms the basis for much of the routine testing. The implied nonroutine tests, whether nonroutine as a result of endpoint, design, or test system, are the subject of individual scientiﬁc justiﬁcation and are not ruled out.

Box 1 The Core Battery of Tests and Follow-Up Studies with Examples of Investigations Core battery tests: r Central nervous system (CNS) Motor activity, behavioral changes, coordination, sensory/motor reﬂex responses, and body temperature r Cardiovascular system (CVS) Blood pressure, heart rate, and the electrocardiogram (ECG) r Respiratory system Respiratory rate and other measures of respiratory function (e. g., tidal volume or hemoglobin–oxygen saturation) Supplementary tests: r CNS r

r r

r

Behavioral pharmacology, learning and memory, ligand-speciﬁc binding, neurochemistry, visual, auditory, and/or electrophysiology examinations. CVS Cardiac output, ventricular contractility, vascular resistance, the effects of endogenous, and/or exogenous substances on the cardiovascular responses. Respiratory system Airway resistance, compliance, pulmonary arterial pressure, blood gases, blood pH. Renal and urinary system Urinary volume, speciﬁc gravity, osmolality, pH, ﬂuid/electrolyte balance, proteins, cytology, and blood chemistry determinations such as blood urea nitrogen, creatinine, and plasma. GI tract Gastric secretion, GI injury potential, bile secretion, transit time in vivo, ileal contraction in vitro, gastric pH.

Safety Pharmacology

119

r Autonomic nervous system Binding to receptors, functional responses to agonists or antagonists, direct stimulation of autonomic nerves and measurement of cardiovascular responses, baroreﬂex testing, and heart rate variability. Compiled from Ref. 2.

WHAT TO TEST? The exact identity of the compound to be tested may not be as straightforward as ﬁrst thought might suggest. While testing the parent compound is a given, there may be strong arguments for testing major human metabolites that are not seen in laboratory animals; this argument is enhanced if the metabolites are known to be pharmacologically active. If the compound you are developing has enantiomers or isomers, consider testing these as well, especially as enantiomers can express very different activity. For instance, the S(+) enantiomer of vigabatrin is known to be the active enantiomer in epilepsy while the R(+) is inactive; likewise, the enantiomers of thalidomide have different activities. Additional testing may also be indicated if the formulation of a compound radically alters its pharmacodynamic properties, for example, if a liposomal form is developed. Another group of compounds that pose problems are biotechnology products such as proteins or antisense nucleotides with very precise speciﬁcity for species or receptors. These are considered in ICH S6 (3). If the target speciﬁcity of a protein means that there is no likely interaction with the receptors normally investigated in routine safety pharmacology studies, there may not be any scientiﬁc utility in performing routine studies. Another point to consider is that a humanized monoclonal antibody is unlikely to have any relevant effect in a rodent and, as for the toxicity program, the most relevant test species should be chosen. One expensive alternative is to develop a version of the molecule that is speciﬁc for your chosen test species, for instance, a mouse interferon or antibody. This does not mean that safety pharmacology for these compounds can be ignored; it has to be considered and a logical rationale put forward for the proposed testing program, even if it is essentially one without formal studies. For this type of compound, it is likely that some of the points covered in safety pharmacology studies can be looked for in the toxicity studies. DESIGN ICH S7a indicates that safety pharmacology studies should be designed to deﬁne the dose–response relationship of the adverse effect observed and to investigate the time course of any such effects. The basics of study design for safety pharmacology are given in Box 2. Doses or concentrations used should span the therapeutic and pharmacodynamic ranges; it is important to do this so as to take into account any differences among species

120

A Guide to Practical Toxicology 2nd Edition

in terms of sensitivity. Where no pharmacodynamic effect can be induced, it is acceptable to use a dose that produces moderate adverse effect in studies of similar duration or route of administration. However, it should be recognized that some effects produced may complicate interpretation of the data and may themselves set a limit on dose. Therefore, the high dose should produce some toxicity with the proviso that the toxicity should not affect the parameters measured. For instance, in a respiratory study, minor change in the plasma activity of hepatic marker enzymes or bodyweight loss may be acceptable but emesis, hyperactivity, or muscular tremor would not be. Selection of the maximum dose possible is indicated because adverse pharmacological effect may be associated with receptor interactions where afﬁnity is several orders of magnitude lower than that of the intended receptor. The low dose should not be lower than the primary pharmacological dose or the human clinical dose. Where other data are not available, it may be acceptable to use multiples of the pharmacological dose; where toxicity is not limiting, a margin of 100-fold the pharmacologically active dose should be considered. Although it is desirable to include several doses or concentrations, where no effect is produced on the endpoint for safety pharmacology, a single limit dose may be acceptable. Box 2 Basics of Safety Pharmacology—Test Design r Objective is to deﬁne dose–response or concentration–response relationships and to investigate time course of effect. r Doses should include and exceed the primary pharmacodynamic or therapeutic range. In the absence of effect, the dose should be high enough to produce moderate adverse effect in studies with similar route of administration and duration. Concentrations in vitro should be chosen to elicit effect. r Normal design is control and three doses or concentrations. r A single group tested at a limit dose may be enough, if no pharmacological effect is seen. r Duration is usually single dose or short in vitro exposure (often to successively rising concentrations). r Compounds to test: parent compound (and enantiomers or isomers) and any major metabolite expected to be present in man. r Measurement at least at the time of maximal pharmacodynamic effect or plasma concentration (T max ) and when there is no drug present. r In general, these studies should be designed and conducted according to Good Laboratory Practices.

The timing of measurements is important and the time points chosen need to be scientiﬁcally justiﬁable. Ideally, they should be timed according to pharmacodynamic or pharmacokinetic data and should include measurements at T max and when there is no drug present in order to assess maximal effect and any

Safety Pharmacology

121

reversibility or delayed effects. The type of measurement may be indicated by compound class as well as by guidelines. Although safety pharmacology studies are usually single dose, repeat dose studies may be indicated by results from repeat dose toxicity studies or human experience. The pitfalls of including safety pharmacology studies in routine toxicity studies are discussed later in this chapter. TEST SYSTEMS FOR SAFETY PHARMACOLOGY As with much of toxicology, the test systems used are often those in wide use that have been validated and accepted by the various regulatory authorities. Rodents are the main models to be used, either for in vitro applications or as complete living animals. The use of nonrodents is expensive and they tend to be used much less frequently, although the use of in vitro preparations such as Purkinje ﬁbers from dogs or sheep has been more frequent in the recent past. The test systems most often used are indicated in Box 3. Box 3 Test Systems for Safety Pharmacology r In vitro preparations Cells in culture (hERG assay) Isolated tissues—papillary muscle, Purkinje ﬁbers Perfused organs—heart, kidney r Rodents Mouse—modiﬁed Irwin test, GI tract transit time, renal function Rat—modiﬁed Irwin, renal function, respiratory, GI tract transit time; telemetric surgical implants may be used when appropriate r Nonrodents Anaesthetized animals for CVS and respiratory studies (but not for ventilation effects), sometimes combined with renal function Freely moving telemetry implanted animals, for CVS and respiratory studies

SAFETY PHARMACOLOGY IN TOXICITY STUDIES It is logical to make as much use of animals in toxicity studies as possible, as long as this can be done without compromising the integrity of the other investigations or vice versa. In view of this, it is an attractive option to bolt on some additional observations to the protocol for, for instance, a 4-week study in rats. However, Redfern (1) points out that this apparently attractive option has some disadvantages, namely, that repeated administration may mean that effects are examined rather than responses and that the results of the tests may be inﬂuenced by any organ impairment that has been produced by the test substance; in addition, the response to the drug may be affected by developing tolerance to

122

A Guide to Practical Toxicology 2nd Edition

repeated administration. The basic message is that such measurements should be made on day 1 of a study before such inﬂuences are manifested as effects due to repeated treatment rather than responses. The bonus of such an approach is that a later examination can be used to chart change from day 1. The drawback is that very often other time-critical examinations are conducted on day 1, including toxicokinetic sampling, and the addition of other, complex, time-consuming tests can make day 1 a logistical nightmare that is a straightforward invitation for error, which may compromise the whole study. TESTS AND THEIR CONDUCT The following is a brief review of a few typical studies that are often performed for safety pharmacology programs. The core battery is looked at ﬁrst, with particular emphasis on cardiovascular studies, followed by a few examples of supplementary studies. Central Nervous System—Modiﬁed Irwin Screen These are deceptively simple studies; animals (rats or mice) receive a single administration of the test compound and are then observed for up to 24 hours. In fact, if there are no visible effects after about 8 hours, the later examinations may be dropped completely. However, this apparent simplicity belies the complexity and number of the observational endpoints that are routinely assessed. The main design points of a typical study are as follows: r Four groups of ﬁve animals, usually rodents (one sex is acceptable, if there is unlikely to be a difference between the sexes) assigned to control and three treatment levels. r Single administration, usually oral or intravenous; the chosen route of administration should not impede the observations required and so continuous infusion and inhalation are not likely to be practicable. r Assess behavioral changes before dosing and at appropriate intervals after, for instance, 1, 2, 4, and 6 hours postdose; if effects are seen after 6 hours, further observations may be carried out after 24 hours, or longer, if indicated. r The observations include, but are not limited to, cage-side assessment, handling and physical observations, and observation in a standard arena for openﬁeld testing. Actual endpoints assessed may include alertness, locomotor and exploratory activity, grooming, tremors or muscle spasms, posture, gait, coat condition, respiration, aggression, skin colour (e. g., for peripheral vasodilation), startle response, reﬂexes (including tail ﬂick test for pain), examination of the eyes for miosis, mydriasis, corneal reﬂex, etc. As with other tests, it is important that the laboratory conducting the test has a good background of experience with the test and the strain of animal used, as this is important in correct interpretation of the often small differences that are

Safety Pharmacology

123

encountered. Every so often there is a suggestion that this type of observational battery could be extended to larger laboratory species such as dogs or nonhuman primates. This is feasible, as has been demonstrated by some laboratories, but the number of parameters examined needs to be reduced. The results of this type of test may be supplemented by the observations from toxicity studies, particularly the single dose studies. Cardiovascular System Useful background to this critical area of nonclinical safety evaluation is given in ICH guideline S7b (4). This indicates that the objectives of these studies include identiﬁcation of the potential of a test substance and its metabolites to delay ventricular repolarization, and to relate the extent of any effect to the concentrations to the test substance and/or its metabolites. It is pointed out that the results of these studies may indicate the mechanism of any effect and can be used in conjunction with other data to make an estimate of risk of cardiac effect in humans. The endpoint that is critical here is the QT interval, or more correctly, the QTc or corrected QT interval, although other endpoints such as heart rate, blood pressure, and peripheral effects should not be forgotten or ignored. The potential for new medicines to affect repolarization of the heart has lead to the removal of a number of noncardiac compounds from the market in recent years. This serious side effect has been associated with sudden cardiac death due to prolongation of the QT interval of the electrocardiogram. The QT interval has become a major focus of pharmacological investigation both in terms of the effects of potential new medicines and in terms of a major research effort to develop new models that are quick to implement, accurately reﬂect human potential for effect and are acceptable to regulatory authorities. The QT interval, as deﬁned by Fermini and Fossa (5) is the period between the beginning of the QRS complex and the end of the T wave as shown in Figure 1 and is a measure of the duration of depolarization and repolarization of the ventricle. The major concern for QT interval prolongation is the increased risk of life-threatening ventricular tachyarrhythmia, including torsade de pointes, particularly when combined with other risk factors (e. g., hypokalemia, structural heart disease, bradycardia). However, the relationship between QT interval and this severe effect is not simple and compounds that prolong QT, such as the calcium channel blocker verapamil, do not necessarily cause torsade de pointes clinically. In fact the effect appears to be a function of increase in the QT interval when corrected for heart rate—the value known as the QTc. To put this in perspective, Fermini and Fossa report that data on QTc intervals in cases of torsade de pointes suggest that a QTc of more than 500 milliseconds indicates a signiﬁcant risk of cardiac arrhythmia and, for individuals, an increase in maximum QTc interval of 60 milliseconds over baseline is also indicative of risk. One of the concerns, from the perspective of safety evaluation, is the fact that this propensity of noncardiac drugs to prolong QTc has been discovered some

A Guide to Practical Toxicology 2nd Edition

124

R

1 mm 40 ms

T

P

Q S QRS interval

QT interval

Phase 2 (Plateau) Calcium current (ICa)

Phase 0 (Depolarization) Sodium current (INa)

Phase 4 (Resting membrane potential) Potassium current (IK1)

Phase 1 (Rapid repolarization) Potassium current (Ito)

Action potential duration

Phase 3 (Repolarization) Potassium currents (IKs, IKr)

Figure 1 Temporal correlation between action potential duration and the QT interval on surface ECG. (Picture of a normal ECG beat with intervals and peaks indicated.) Source: From Ref. 5.

time after marketing of the drug started. For instance, the antihistamine terfenadine was marketed from 1985 and was associated with about 429 serious cardiovascular events and 98 deaths up to 1996. This is a relatively low incidence, quoted to be approximately 0.25 per million daily doses sold (5) and underlines the difﬁculties faced in predicting serious adverse events from medicines; a small difference from background is very difﬁcult to detect and, if detected, to interpret meaningfully. The potential for effect on the QTc interval is assessed in a number of tests, of which the most popular is now the hERG inhibition assay. This may be supported by other in vitro assays but is almost always followed by a test in a dog or nonhuman primate that has a telemetry implant for recording heart rate, ECG, and blood pressure. The hERG Inhibition Assay This assay examines the blockade of K+ channels expressed in human embryonic kidney cells stably transfected with the product of the hERG gene, a human ion channel responsible for the IKr repolarizing current. Inhibition of this current is associated with prolongation of the cardiac action potential, which is in turn associated with cardiac arrhythmias such as torsades de pointes. The technique is a highly speciﬁc, low throughput assay, requiring considerable technical skill and

Safety Pharmacology

125

specialist equipment. Changes in the ionic current are measured using a voltage clamp technique. Variations on this theme that have higher throughput (e. g., measurement of rubidium ﬂux) have been developed. Following are the main points of the assay: r Four or ﬁve concentrations of test substance and an appropriate positive control, such as terfenadine. r Investigate in an appropriate number of cells according to whether the test is a screen or a deﬁnitive assay. r Exposed by continuous perfusion or static bath. r Voltage steps: –15, –5, 5, 15, 25 mV, for example. r Determine the IC50 , if appropriate. Isolated Purkinje Fibers This assay uses isolated Purkinje ﬁbers from dogs or sheep, allowing the effects of a drug on cardiac channels to be studied in situ; this means that the effects on several ion channels can be detected. However, this assay is technically demanding, of low throughput, and a negative result does not exclude proarrhythmic tendencies and consequent risk of torsade de pointes in humans. It also requires the death of a whole animal when a telemetry study might give a more meaningful result; its continued use is, in my view, ethically questionable. Following are the main points of a typical protocol: r r r r r r

Four test ﬁbers and four controls. Test ﬁbers exposed serially to several rising concentrations of the test article. A positive control such as dl-sotalol should be used. Records of intracellular action potential. Electrical stimulation at, for example, 1 and 0.5 Hz. Measurement of: action potential duration at 60% and 90% repolarization, maximum rate of depolarization, upstroke amplitude, and resting membrane potential.

The papillary muscle from the guinea pig and isolated rabbit heart (in, for example, a Langendorf preparation) may also be used to investigate the potential for effect on QT interval. In Vivo Cardiovascular Studies These tests use either anaesthetized animals (usually without recovery) or conscious freely moving animals ﬁtted with telemetry devices. The latter system has huge advantages; it is conducted in a whole, unrestrained, freely moving animal, without the potentially confounding effects of anesthesia. The clinical route of administration may be used and, importantly, the animals can be used a number of times before the implants need to be replaced. A drawback, however, is that this excellent method is expensive and has a time-consumingly low throughput. Typical species include dogs and nonhuman primates but pigs may also be used.

126

A Guide to Practical Toxicology 2nd Edition

Parameters recorded include ECG, heart rate, and blood pressure. In anaesthetized models, parenteral administration is necessary and many anesthetics interfere with cardiac function and add another layer of potential interaction with the test substance, making interpretation more difﬁcult in some cases. A typical protocol for animals with telemetric implants is as follows: r Four animals, usually of the same sex. r Three doses given on one occasion each, plus control to all the animals, with an appropriate washout period between doses; a randomized block design may be used. The washout period should be consistent with the pharmacokinetics or pharmacodynamics of the test substance. r Parameters measured include blood pressure, heart rate, ECG (at least lead II and PR, QT, QTc, RR intervals, and QRS duration), and core body temperature. r Bodyweights and food consumption recorded as appropriate. r Respiratory parameters such as rate, tidal volume, and minute volume may also be examined to give information on another core area of safety pharmacology testing using separate instrumentation. r Measurements carried out shortly before dosing and then continuously or at frequent intervals until 24 hours postdose. r Records are made via receivers placed either in the dogs’ home pens or in specially equipped pens. The animals are freely moving and, crucially, at very low levels of stress, meaning that any differences seen, relative to baseline or controls, are more likely to be related to treatment. Respiratory System The respiratory system is subject to a diverse range of internal and external inﬂuences that result in complexity of control and response. The safety pharmacology studies normally conducted are those that test the effects of systemically administered test substances rather than those given by inhalation. The number of drugs that can affect the respiratory system is surprisingly large. Murphy (6), who published a very useful review of assessment of respiratory function in safety pharmacology, lists more than 60 drugs with the potential to affect bronchoconstriction or pulmonary injury, together with 25 agents and classes that can inﬂuence ventilatory control. An important consideration in rationalizing the need for respiratory assessment is that patients often have compromised respiratory function due to asthma, bronchitis, or emphysema. For example, nonselective ␤-adrenergic antagonists, given for glaucoma or cardiovascular disease, may be associated with life-threatening side effects in asthma patients. Mild suppression of respiration may be life threatening in patients with conditions such as sleep apnea, or if the drug is taken in conjunction with other drugs that suppress respiratory function, such as tranquilizers or sedatives.

Safety Pharmacology

127

A typical study may use rats to assess effects of a drug on parameters, such as respiration rate and tidal volume. For this, the typical protocol could include the following: r Three treatment groups of between 5 and 10 rats, allocated to group randomly based on tidal volumes recorded during the acclimatization period. r Two additional groups receive the vehicle control and a reference substance, such as morphine hydrochloride. r Measurement of respiratory parameters in plethysmography chambers attached to appropriate electronic recording devices, to measure thoracic volume. r Analysis of each parameter at intervals before dosing and at appropriate intervals afterward. r Acclimatization to the recording chambers may be necessary before each measurement. Studies should aim to examine the two basic functions of the respiratory system: pumping air and gas exchange. Parameters indicative of effect on the air pump function include respiratory rate, tidal volume, and minute volume. Respiratory rate and tidal volume are independently controlled and may be subject to selective alteration. Measurement of either of these alone cannot reliably indicate change in pulmonary ventilation. For example, theophylline increases minute volume by increasing tidal volume without affecting respiratory rate and morphine depresses minute volume by reducing respiratory rate with no effect on tidal volume (6). Additional measurements may include ﬂow of inspiration and expiration, detection of hypo- and hyperventilation, and distinguishing between central and peripheral nervous effects. Effects on gas exchange may be assessed by measurement of lung airﬂow and compliance. The usual test systems are dogs and rats, although special compounds may require special animals, such as nonhuman primates or transgenic mice. Guinea pigs may be used for compounds that have activity on leukotrienes or histamine. It is important that evaluation of ventilatory effects should be undertaken in conscious animals as most anesthetics alter ventilatory reﬂexes. It is essential that the animals be acclimatized to the apparatus before the experiment, to ensure that any change in pattern is distinguishable from baseline. GI Tract Rats or mice are used in studies on the GI tract, which typically involve administration of the test substance, followed by a bolus dose of charcoal and subsequent tracking of the meal through the intestine. This is usually achieved by killing the animals and removing the gut and measuring the distance the charcoal has traveled since administration. A protocol may include the following: r Five to ten rats or mice per group, dosed at three treatment levels and a control. r Administration by oral gavage of a small amount of charcoal suspension (1mL).

128

A Guide to Practical Toxicology 2nd Edition

r Half to one hour after the charcoal dose, the animals are killed and the distance the charcoal meal has traveled along the intestine from the stomach is measured together with the total length of the intestine. r The stomach may be weighed to give an indication of gastric emptying. Alternative approaches being developed include gamma ray counting of a labeled bolus that can thus be tracked in the living animal over a longer period than is possible using the more conventional study design described. Renal Function This is usually a straightforward assessment of renal function in terms of concentrating ability and electrolyte composition of urine collected over a deﬁned period, following administration of the test substance. The protocol main points are as follows: r Rats are loaded with saline before administration of the test substance. r Groups of 5 to 10 animals are treated at three dose levels and a vehicle control. r The animals are placed individually in metabolism cages and urine collected at intervals such as 0 to 4, 4 to 8, and 8 to 24 hours postdose. r Water and food are withheld over the ﬁrst few hours and then returned for the later collection(s). r The pH and volume of each urine sample are measured. r Each sample is analyzed for sodium, potassium, and chloride concentrations, which are corrected to output, using the volume of urine excreted and the animal body weight (mmol/kg). r It may also be sensible to examine the activities of urinary enzymes such as alkaline phosphatase or N-acetyl glucosaminidase. PITFALLS OF SAFETY PHARMACOLOGY STUDIES Inevitably, there is a number of aspects of these studies to be aware of, both in conduct and in interpretation. The presence of confounding factors in the design should be considered carefully. In studies with anaesthetized animals, it is possible that the choice of anesthetic may have an inﬂuence on the parameters measured and so produce results that are skewed, giving a false impression of effect or absence of effect. Toxicity may interfere with the responses of the animals and so, for instance, animals may respond differently in an Irwin screen at a toxic dose as compared with a dose that is pharmacologically active. In some cases, parameters may be estimated rather than measured directly and this can have unintended consequences. For example, in respiratory studies, estimation of tidal volume rather than direct measurement may give misleading results as tidal volume is dependent on other variables, such as breathing rate and pattern, temperature, and humidity. An increase in the breathing rate of a rat from 40 to 70 breaths per minute may

Safety Pharmacology

129

cause a 30% underestimation of tidal volume (6). The bottom line here is that if the parameter is inﬂuenced by factors that are not properly controlled, direct measurement is preferred to estimation. Lack of acclimatization to experimental circumstances may also produce a set of data that changes over repeated measurement as the animals become more familiar with the equipment or surroundings. In addition, because the tests are almost always single doses, they measure response to treatment in na¨ıve animals and changes that accumulate over repeated dosing will be missed. However, this point may be mitigated by appropriate clinical observation in standard toxicity studies or by inclusion of safety pharmacology investigations. Having said that the warnings given above about including safety pharmacology end points in routine toxicity studies have to be considered. Many of the assays, both in vivo and in vitro, are technically demanding and it is important that the laboratory conducting the test should have adequate experience and skill in conduct and interpretation. The possession of a good historical control database is important here since the group size is small and may lead to chance differences from control, which in the absence of dose relationship may not be treatment related. For in vitro experiments, it is important that the tissues or cells are treated appropriately from the moment of removal from the culture or from the animal. If the handling is in any way below best practice, the end result may not be good enough for deﬁnitive interpretation. OVERVIEW Safety pharmacology studies are conducted almost exclusively for pharmaceuticals, although there is no particular reason why judicious use for other chemical classes should not provide useful information, perhaps for exploration of mechanism. The conduct of safety pharmacology studies has been increasingly mandated by regulatory authorities as a response to clinical ﬁndings, sometimes after several years of successful marketing. Although such responses are often reﬂexive and excessive, we are now at a point where the tests requested are reasonable and, if justiﬁable, inappropriate tests can be omitted or different ones suggested, in order to address the core battery of tissues and organ systems. These consist of the central nervous, respiratory, and cardiovascular systems; supplementary tests may be appropriate to investigate the ﬁndings of the core battery or to examine an expected effect of the test compound. Above all, these tests should not be conducted to tick boxes, even if that is often effectively what happens. It is important to consider each test suggested on its scientiﬁc merit and to be able to defend its conduct or omission, if and when required. The guidelines available, especially ICH S7a and ICH S7b, give a robust framework for designing these tests but, despite the temptation, they should not be treated as gospel to justify the conduct of meaningless tests.

130

A Guide to Practical Toxicology 2nd Edition

REFERENCES 1. Redfern WS, Wakeﬁeld ID, Prior H, Pollard CE, Hammond TG, Valentin JP. Safety pharmacology—A progressive approach. Fundam Clin Pharmacol. 2002; 16(3):161– 173. 2. ICH Harmonised Tripartite Guideline: Safety Pharmacology Studies for Human Pharmaceuticals S7a. November 2000. Available at www.ich.org. 3. ICH Harmonised Tripartite Guideline: Preclinical Safety Evaluation of Biotechnology Derived Pharmaceuticals S6. July 1997. Available at www.ich.org. 4. ICH Harmonised Tripartite Guideline: The Non-Clinical Evaluation of the Potential for Delayed Ventricular Repolarization (QT Interval Prolongation) by Human Pharmaceuticals S7b. May 2005. Available at www.ich.org. 5. Fermini B and Fossa AA. The impact of drug-induced QT interval prolongation on drug discovery and development. Nature Revi Drug Discov. 2003; 2:439–447. 6. Murphy DJ. Assessment of respiratory function in safety pharmacology. Fundam Clin Pharmacol. 2002; 16(3):183–196.

6 Determination: General and Reproductive Toxicology

GENERAL TOXICOLOGY In broad terms, general toxicology is something of the poor relation of toxicology. It can be seen as lacking the glamour or intellectual rigor of other areas of toxicological investigation because it sets out to be a catch-all, to paraphrase Gerhard Zbinden, “it looks for everything but hopes for nothing.” However, it is central to safety evaluation of novel chemicals, as effects that may be seen in other more specialized areas can also be detected or supported by well-designed general toxicity studies. For example, microscopic evaluation of testes in a general toxicity study may indicate the potential for effects in formal fertility studies in the program of reproductive toxicity studies.

TEST SYSTEMS FOR GENERAL TOXICOLOGY The large majority of test systems for general toxicity are animal-based, due to the need to demonstrate toxicity elicited after repeated administration over long periods, something that in vitro systems are only just beginning to do. A further factor militating against such systems is the multiplicity of endpoints examined in a classic animal study and the limited number of such possibilities in a cell culture that lacks the complex interactions between tissues seen in whole animals. For a complete picture, general toxicology also requires an estimation of the absorption, distribution, metabolism, and elimination (ADME) of a compound and of the pharmacokinetics following single and repeated administration. With pharmaceuticals particularly, it is important to choose one species that is as close to humans as possible in terms of ADME; two such similar species would be 131

A Guide to Practical Toxicology 2nd Edition

132

Table 1 Test Systems for General Toxicology Rodent Rat Mouse Hamster

Nonrodent Dog Nonhuman primate Minipig Rabbit

Source: Adapted from Ref. 1.

better but as one is almost always the rat, this luxury is not always possible. The use of comparative in vitro metabolism data and preliminary in vivo data should allow a scientiﬁcally justiﬁable choice of test species to be made. In practice, the test species are chosen from a relatively limited pallet of possibilities, restricted by toxicological conservatism and regulatory acceptance, as indicated in Table 1. The advantages and disadvantages of each system are summarized in Box 1. Box 1 Characteristics of Test Systems for General Toxicology The following attributes for the main test species are given in no particular order and without guarantee of completeness: r Rats/mice: Easy to house; small, meaning that relatively little test substance is needed; well understood with ample historical control data; multitude of strains; short life spans; good regulatory acceptance; traditional; few ethical problems associated with their use; genetic consistency; statistically robust designs are relatively easy to achieve at sensible cost; not necessarily good models for humans; metabolism tends to be rapid and systemic exposure lower than in humans; males have greater metabolic capacity than females, which often leads to sex-related differences in toxicity. Sexually mature at 5 to 7 weeks. r Hamsters: Alternative to rat or mouse but rarely used except in specialist studies and some carcinogenicity bioassays; few historical control data; the species to use when all other rodent options are exhausted. r Beagle dogs: Reasonable size to work with; good natured; well accepted and now the only dog available in the United Kingdom for laboratory experiments; well-understood; ample historical control data; good regulatory acceptance; can react badly to compounds such as nonsteroidal–antiinﬂammatory drugs; low workplace handling risk; usually weigh between 10 and 15 kg, needing large amounts of test substance; large areas needed for stress-free housing and husbandry. Sexually mature at 7 to 12 months. r Minipigs: Similarity of skin to humans makes them suitable for dermal studies; kidney structure similar to humans; not a mainstream species but with increasing regulatory acceptance; omnivorous diet gives gastrointestinal

Determination: General and Reproductive Toxicology

133

similarity to humans; large—“mini” can mean up to 50 kg with a norm of about 20 kg and a consequent effect on test substance requirements; not as easy as dogs to dose or to take samples from; some metabolic peculiarities, particularly in sulphation. Sexual maturity at 4 to 5 months (for sows) and 3 to 4 months for boars. r Non-human primates (NHPs): Species used at present normally macaques (cynomolgus or rhesus monkey); the marmoset is used in some circumstances; complex to keep, group housing gives optimum results; supposedly closer to humans in terms of ADME but not always; good regulatory acceptance; size generally between 2 and 5 kg (cynomolgous monkey) or 250 to 600 g (marmoset); small size of marmosets means lower compound requirement (good for biotechnology products), but this alone cannot justify selection; more expensive and less available than dogs; small size of marmosets may necessitate use of satellite groups for pharmacokinetic determinations; marmosets are subject to stress and diet factors; intense ethical and government pressure against use of any NHP. Sexual maturity at 14 to 18 months (marmosets) or 4 to 5 years (macaques).

Of all the above test systems, NHPs have been the subject of most debate and ethical pressure to avoid or proscribe their use. Until about the 1990s NHPs were wild-caught animals, which produced a variety of problems that were either not understood or simply ignored. The animals were generally of unknown age and origin, with unknown diseases or parasite proﬁles. In particular, they could—and did in some cases—transmit fatal zoonoses to humans, such as hepatitis B, and viruses such as rabies, Ebola and Marburg. As a result of their inconsistent origins, ages, and histories, they gave inconsistent historical control data. These problems have been largely circumvented by captive breeding; however, control over viral status is dependent on source, as established breeders are able to provide certiﬁed virus-free animals. Ferrets were suggested, at one time, as an alternative to dogs, because they have a similar gut microﬂora to humans. However, they offer more problems than solutions and I have never seen a general toxicity study in ferrets. Rabbits have been the species of choice in short-term dermal toxicity studies but not for other routes of administration. The minipig is increasingly used in dermal studies due to the similarity of the skin to that in humans. The age of the animals used should be considered. Young animals tend to metabolize chemicals somewhat differently to adults and this can lead to unexpected results due to age-related differences in metabolic capabilities, especially in rodents. Similarly with dogs, it is quite normal to use immature animals at about ﬁve-months or six-months-old; the consequence of this is that reproductive toxicities, such as testicular atrophy, may not be apparent in shorter studies. For practical reasons of age and safety of handling staff, primate studies are usually conducted with immature animals of about 2 to 3 years old. It is possible to obtain

134

A Guide to Practical Toxicology 2nd Edition

mature monkeys, but they are expensive and difﬁcult to handle safely, a factor of some importance, given the sometimes-fatal diseases that they can pass on either through a bite or through feces or urine. STUDY DESIGNS IN GENERAL TOXICOLOGY Studies in general toxicity include the shortest and the longest studies in toxicological investigations, the only others of comparable length being the periand postnatal development reproductive study and the two-year carcinogenicity bioassay. The shortest and simplest study is the single dose acute study, which is intended to characterize severe toxicity following a single large dose. The original objective was to calculate the LD50 or median lethal dose at which 50% of the treated animals died; this was established statistically from the results of several treatment groups of up to 10 animals of each sex. The results were not always reproducible as acute toxicity may be signiﬁcantly affected by many factors including strain or supplier of animal, diet, or environmental factors. Although the LD50 test itself is no longer conducted, the concept is retained as a useful indicator of toxicity ranking; the ﬁgure can be estimated approximately from the data from the initial sighting studies, usually in terms of a dose greater than, for example, mg/kg. In an acute study, the animals are dosed once and observed for 14 days, which is both, a strength and a weakness. Some toxicity expressed in the period immediately following administration, for example, liver toxicity seen with carbon tetrachloride, may be completely repaired by the end of the 14 days. However, 14 days may allow any slowly developing toxicity to be expressed; this can be seen with cytotoxic anti-cancer chemotherapies. The basic designs for general toxicity studies are summarized in Table 2 (see also section “Study Design Basics and Confounding Factors” in chapter 3). The observations and measurements indicated in this table are discussed below. Study Duration The duration of studies in safety evaluation is largely ﬁxed by toxicological convention and increases as the program progresses, from 14- or 28-day studies, to 13 weeks, to 26 weeks (rats) or 39 or 52 weeks in nonrodents. The basic design of all these studies is the same, namely a control and three treatment groups. These receive dose levels that are based on a high dose expected to cause toxicity, a low dose calculated to be a high multiple of expected human exposure and an intermediate dose level at an approximate geometric mean of the other two. One of the objectives is usually to determine a no-observed-effect-level or a no-observedadverse-effect-level (NOAEL), from which safe exposure levels for humans may be estimated. A typical dose level choice could be 10, 30, and 100 mg/kg/day. With increasing study duration, the number of animals tends to increase from 10 per sex per group in rats in 14- or 28-day studies to 15 per sex per group or more in the longer ones. In addition, the longer studies will probably include animals

Not done

Not done Not done All groups Gross lesions

Not donef

Nonrodent All All Rodent

Nonrodent

Not used

Nonrodent

Rodent

5 m + 5 fb

Rodent

Acute (single dose) 10 m + 10 f (Rev 5 m + 5 f in 3 groups) 4 m + 4 f (Rev 2 m + 2 f in 2 groups) Wk 4 or 6, 13, rev.

13 weeks 15 m + 15 f (Rev 5 m + 5 f in 3 groups) 4 m + 4 f (Rev 2 m + 2 f in 2 groups) Wk 13, 26

26 weeks

Wk 0, 4 + end rev. Wk 0, 4 or 6, 13, rev. Wk 0, 13, 26, rev. Wk 0, 4, end rev Wk 0, 13, rev Wk 0, 13, 26, rev. All groups All groups All groups Control, high dose and affected tissues at low- and mid-dose groups. Affected tissues only in reversibility groups. All animals are examined.

10 m + 10 f c (Rev 5 m + 5 f in 3 groups)d 3 m + 3 f (Rev 2 m + 2 f in 2 groups) Wk 4 + end rev.

2 or 4 weeks

b Groups

in acute studies there are usually three treated groups and a control. of 2 m + 2 f used for dose selection. c This may be reduced to 5 m + 5 f in some cases. d Reversibility studies usually controls, mid- and high dose for rodents, controls and high dose for dogs (or mid- and high dose only); examinations normally conducted in ﬁnal week. e In addition, organ weights are recorded on all except acute studies. In-life observations on all studies include clinical signs, bodyweight, and food consumption. f Acceptable data on acute toxicity may be obtained from early dose range ﬁnding studies. Abbreviations: m, male; f, female; rev, reversibility studies; Wk, week. Source: Adapted from Ref. 1.

a Except

Ophthalmoscopy Necropsy Histopathologye

Clinical pathology

Group sizea

Species

Table 2 Summary of Basic Designs for General Toxicology

Determination: General and Reproductive Toxicology 135

A Guide to Practical Toxicology 2nd Edition

136

allocated to recovery or reversibility studies to assess the regression of effects when treatment is withdrawn. In practical terms, this means that 18 weeks should be allowed for a 13-week study in rats, divided into one week for acclimatization to the study room, 13 weeks for treatment and 4 weeks without treatment. For nonrodents, the study durations are the same but animal numbers are lower for reasons of ethics, space, and cost. Typically, a 14- or 28-day study in dogs will be conducted with three dogs per sex per group and a 13-week study with four per sex per group, with additional animals allocated for reversibility studies (see section below). In some cases, for pharmaceuticals, a so-called extended single dose study is acceptable for single administration to human volunteers. For instance, they are accepted by the FDA and by the EMEA as toxicity studies to support microdosing studies in man (in which small doses of radiolabeled material are administered to give an early indication of pharmacokinetics). Similar sized groups of animals to those used in the two- or four-week study designs given above are used, with an interim kill two days after dosing and a second after 14 days. Although they have the advantage of lower test item requirements, they use more animals and take the same amount of time as a conventional study—which will have to be performed later in any case. As a result, they do not generally have any signiﬁcant advantages over routine designs. Parameters Measured in General Toxicology General toxicity studies are relatively nonspeciﬁc screens for adverse effects that are not necessarily predictable, but which are likely to arise in known ways or manifestations. For this reason, the measurements that are conducted in these studies are very similar across programs and study type. Where toxicity of an unexpected or new type is seen, it is often investigated in speciﬁcally designed mechanistic studies. The normally conducted measurements and observations are discussed brieﬂy below. They can be broadly divided into three categories—in-life observations, clinical pathology, and post-mortem investigations. In-Life Observations Of the investigations summarized in Box 2, clinical observation and measurement of growth and food consumption are usually the most informative. Effects on the eyes are rare, but this is an examination that is common to all regulatory guidelines, in deference to the importance of ocular effects in humans. Although examination of the other senses would also seem sensible, it is difﬁcult to achieve, the only other occasionally examined being hearing, usually by means of a whistle or other sudden noise. A deeper investigation of the nervous system can be achieved through neurological examination, a relatively simple estimate for neurotoxicological potential, which can be performed in most species. Other in-life examinations, relevant to the expected effects of the test substance, may include measurements of testicular size and semen sampling or examinations such as

Determination: General and Reproductive Toxicology

137

electro-encephalograms or electro-retinography. The last two are rarely used and are of questionable utility in general toxicology. Box 2 In-Life Observations and Measurements in General Toxicology r Clinical observations: Clinical observations following administration are

r

r r r

the most basic investigation and give information on the effects of the compound that may be expected at high doses in humans. Subjective indications of ill-health, such as headache or nausea, are not readily assessable in animals; however, lack of activity or abnormal posture may be a consequence of these. Salivation at or immediately after dosing is seen frequently in oral toxicity studies and may simply reﬂect the expectation of dosing or taste of the test substance. Food consumption and bodyweight: These are nonspeciﬁc indicators of toxicity that may be affected by many factors such as general malaise, pharmacological action, sedation, or other neurological effect. They act as critical early indicators of effect before other examinations are employed to investigate further. Water consumption: It can be measured if there is suspicion that kidney function is affected. It should be noted, however, that water consumption will tend to be lower if food consumption is also reduced. Ophthalmoscopy: It is performed before treatment and at the end of the treatment and, if appropriate, reversibility periods. Electrocardiography: This is useful for assessing unwanted or pharmacological effects on the heart and can be allied with blood pressure measurements. Although routine in nonrodents, it is only practicable in rats if sophisticated computerized systems are used. Blood pressure measurement is normally indirect by use of a pressure cuff on the tail but can be direct from an artery by use of a pressure transducer. These measurements are more satisfactorily achieved by telemetry but this is an expensive add-on to toxicity studies.

Clinical Pathology The next group of investigations is performed on blood, urine, or feces to assess the effects of treatment on the function and status of a number of major organ and tissue systems. This may give early warning during a long-term toxicity study that is not apparent from in-life observation or may support these ﬁndings; equally, they may be indicative of early toxicity that has resolved later in the study. Clinical pathology investigations are relatively simple and give quantitative data, which are amenable to statistical analysis. Interpretation of variation from controls or historical control data depends on the interrelationship of observed differences, the presence of dose relationship, and of other changes in the study.

138

A Guide to Practical Toxicology 2nd Edition

Haematology examines the numbers and morphology of the erythrocytes, platelets, and leukocytes in the peripheral circulation. r Erythrocyte parameters: Hemoglobin, red cell count, hematocrit, absolute (calculated) indices (mean cell volume, mean cell hemoglobin, mean cell hemoglobin concentration), reticulocyte count. Cell morphology. r Leukocyte parameters: Total and differential white blood cell counts. Morphology. r Coagulation Prothrombin time, activated partial thromboplastin time, ﬁbrinogen concentration, and platelet count. These measurements give insight into the condition of the bone marrow and the presence of peripherally induced anaemias. The coagulation measurements give some indication of the condition of the liver, in that prolongation may mean that there is reduced synthesis of coagulation factors due to changes in hepatic synthetic capacity. These examinations may be extended by examination of smears to determine any effects on the bone marrow. Fibrinogen, as well as being a precursor of ﬁbrin, is one of the acute-phase proteins which vary in concentration according to conditions such as inﬂammation. Clinical chemistry is intended to examine the function of several organ systems, particularly the liver and kidney, through determination of the activity of enzymes and of measurement of a number of analytes, such as urea, proteins, and electrolytes: r Enzymes: Alkaline phosphatase, alanine, and aspartate aminotransferase, lactate dehydrogenase, gamma-glutamyl transpeptidase, leucine aminopeptidase, creatine kinase; sorbitol dehydrogenase may also be examined as a test of liver function. r General analytes: Urea, creatinine. Glucose, total protein and differential protein electrophoresis, albumin, A/G ratio. Cholesterol, triglycerides, creatinine. Total bilirubin. r Electrolytes: Sodium, potassium, chloride, calcium, phosphate Liver function is indicated by changes (usually increases) in the activities of several enzymes that are more or less speciﬁc for differing functional changes; the concentration of the various proteins is also useful in this respect. Kidney function is shown by the concentrations of urea, creatinine, and electrolytes. There is no reliable enzymatic indicator for kidney damage in the plasma but several enzymes may (occasionally) be assayed in the urine, for instance, alkaline phosphatase and N-acetyl-␤-glucosaminidase. Other tissues or organs may be assessed through the activity of other enzymes such as creatine kinase for heart-related effects, and aspartate aminotransferase for changes in musculature (in the absence of change in alanine aminotransferase, as together these two enzymes are markers of liver toxicity). Changes in alkaline phosphatase and lactate dehydrogenase may be further assessed through isoenzyme studies, to indicate if the liver or another tissue is the prime organ of effect. Some enzymes are more appropriate than

Determination: General and Reproductive Toxicology

139

others in the various species used. Marmosets have low peripheral activities for alanine aminotransferase, rats have low gamma-glutamyl transpeptidase, and in other nonhuman primates, the plasma activity of alkaline phosphatase and lactate dehydrogenase tend to be more variable and consequently less useful than in other species. In NHPs, leucine aminopeptidase is usually used instead of alkaline phosphatase (2). Urinalysis is the main in-life window on kidney function, through examination of urinary electrolyte concentrations (used with volume to calculate total output), stick tests, and microscopic examination of sediment obtained after centrifugation. It is either quantitative or semi-quantitative: r Quantitative: Volume, osmolality, or speciﬁc gravity, pH, electrolyte concentrations (Na, Cl, PO4 , Ca). r Semiquantitative: Appearance/colour. Stick tests for protein, glucose, ketones, bilirubin, and blood. Microscopy of the deposit left after centrifugation. Although the stick tests are given here as being semi-quantitative, instrumentation is now available to read them and obtain a quantitative value. Unlike blood, urine should be collected over a period of hours, preferably overnight and so requires special collection cages in which the animals can be isolated. It is possible to allow access to water over this period but one of the functions of urinalysis is to determine the ability of the kidneys to produce concentrated urine. Postmortem Examinations At the end of the study, the animals are killed humanely and subjected to a thorough postmortem (autopsy or necropsy), in which a range of organs is weighed and the tissues examined in situ and after removal. Up to 50 organs or tissues may be retained in ﬁxative against histopathological processing and microscopic examination (Table 3). The purpose of these examinations is to detect morphological effects that may correlate with other changes seen in in-life or in clinical pathology. Changes that may have long-term consequences for the animal should also be found, such as endocrine-induced hyperplasias that might develop into tumours in later life. Organ weights indicate effects due to atrophy, for instance, in the testis, or of adaptive hypertrophy, which may be seen in the liver following administration of enzyme inducers or peroxisome proliferators such as diethylhexylphthalate. Some organs are weighed routinely but the data do not necessarily reveal much that is useful due to variability of postmortem blood loss, lung weight being an example. The weight of the uterus is greatly affected by the stage of sexual cycle at the time of kill, and this should be taken into account when examining the weights. A further variable that must be considered is bodyweight, and this can be corrected for by expressing the organ weights as a percentage of bodyweight. This becomes important when there is a signiﬁcant difference in bodyweights between controls and treated animals. The weights of some organs follow bodyweight fairly closely

140

A Guide to Practical Toxicology 2nd Edition

Table 3 Organs and Tissues that may be Retained at Necropsy All gross lesions Adrenalsa Aorta Bone (sternum) Bone marrow smear Braina Cecum Cervix Colon Duodenum Eyes/optic nerves Hearta Ileum Jejunum Kidneysa Livera Lungs (with main stem bronchi)a Lymph node: Mesenteric, submandibular Mammary gland or site Esophagus Ovariesa

Pancreas Pituitarya Prostate Rectum Salivary gland Sciatic nerve Seminal vesiclesa Skeletal muscle Skin Spinal cord: Cervical, thoracic, lumbar Spleena Stomach Testes/epididymidesa Thymusa Thyroids/Parathyroidsa Tongue Trachea Urinary bladder Uterusa Vagina

Note: a All these organs are weighed; paired organs should be weighed separately. Source: Adapted from Ref. 1.

(e.g., the liver); others tend to remain constant despite ﬂuctuations in the animals bodyweight, the brain being a good example of this. Macroscopic appearance of the tissues as determined at necropsy is an important indication of effect and may be the only pathological evidence of change. Any abnormalities are noted and the tissue retained for microscopic examination. It is important that this examination is carried out by experienced technicians and that the information is accurately recorded. This is the link between the in-life observations, particularly information on the presence of tumours noted at clinical observations, and the pathological examination of the tissues sections. Microscopic appearance assessed in stained sections cut from ﬁxed tissue is the ﬁnal examination of the study. Microscopic examination is used to detect any subtle or obvious differences between the control and treated animals, which may have arisen as a result of treatment with the test material. These changes may correlate with other evidence, for instance, from gross ﬁndings at postmortem or clinical pathology. The normal ﬁxative is 10% neutral buffered formalin, although Davidson’s ﬂuid is used for the eyes and occasionally the testes. If it is intended to carry out testicular staging (i.e., assessment of all stages of spermatogenesis present), Bouin’s ﬂuid is often preferred. The normal stain used is hematoxylin and eosin but specialist stains may also be employed, for instance, Oil-red-O (on

Determination: General and Reproductive Toxicology

141

frozen sections) for lipid or periodic acid Schiffs for glycogen. The use of electron microscopy is infrequent in routine toxicity studies, it being more applicable to mechanistic studies. The ﬁxatives commonly used for electron microscopy are glutaraldehyde and osmium tetroxide, and it is important that the samples are as fresh as possible. Although it is possible to carry out electron microscopy studies on formalin-ﬁxed tissue, results are inferior and they become less useful with increasing sample age. Reversibility or Recovery Studies In studies of 13 weeks or longer, it is normal to include subgroups of animals that receive the same duration and dose levels of treatment as the other animals on the study, but are retained to assess the reversibility of any toxicity seen during the study. The usual length of such treatment-free periods is four weeks, which is normally enough to show the regression of treatment-related effects, either completely or in part. However, there may be reasons for using a longer period to achieve reversal of effects seen. These may include the toxicokinetics of the test substance or the type of lesion seen in the test animals. For chemicals with long elimination half-lives, such as some humanized antibodies, it is possible for clearance to be delayed for several weeks. As the continued presence of the test substance in the tissues or plasma may prolong the adverse effects of treatment, it is important to ensure that a period is allowed for recovery after complete elimination of test substance. For certain types of lesion, usually those seen microscopically, a longer period without treatment is required simply because they take longer to regress. Among such changes are pigment depositions in the liver, e.g., hemosiderin or intracellular inclusions that have accumulated due to slow metabolism of their constituents. One example of the latter type is the accumulation in male rat kidneys of the complex of ␣2␮-globulin with compounds such as trimethyl pentanol, the metabolite of trimethyl pentane. Three months is normally the longest recovery period in routine use. Longer periods may be used but become increasingly difﬁcult to justify; if a change is not reversible in three months, this may indicate the possibility of undesirable persistence of effect in humans. The number of animals allocated to reversibility studies is also largely deﬁned by convention. In studies using rodents, the usual number is ﬁve males and ﬁve females allocated to each group, including the controls, although such animals may be omitted from the group treated at the lowest dose level. In studies with nonrodents, reversibility animals are typically included in the control and high-dose groups and occasionally at the intermediate level. The usual number is two males and two females, numbers being restricted for ethical reasons. The omission of animals for reversibility studies from the intermediate- and lowdose groups can be a weakness if there is excessive toxicity at the highest dose resulting in early termination of that group. However, it is usually possible to make an estimate of the expected reversibility of effects seen, based on knowledge of

142

A Guide to Practical Toxicology 2nd Edition

type and extent of changes seen in the high-dose animals. Thus, adaptive change such as hepatocyte hypertrophy in the liver due to induction of hepatic enzymes is usually readily reversible, whereas other change may be expected to persist. Fibrosis, consequent upon extensive necrosis in the liver would be expected to be irreversible, although function may not be seriously impaired if the lesions are not too extensive. For these reasons, it is possible, sometimes, to have reversibility animals for nonrodents only in the mid- and high-dose groups to indicate any dose response in recovery from toxic change, as the controls from the end of the treatment period may be sufﬁcient to act as controls to the later sacriﬁce. However, this may not be sensible in shorter studies, for instance, in dogs, when a portion of the animals reach sexual maturity during the study; if the reversibility period is longer than four weeks, it may be advisable to include controls. To track reversibility in rats, animals for reversibility studies should be included in clinical pathology examinations at least at the end of the treatment period and at the end of the treatment-free period. This is not an issue with nonrodents. EXAMINATIONS FOR SPECIFIC TOXICITIES There are several areas of toxicity that do not merit their own special category of investigation, unlike genotoxicity or carcinogenicity, but which may be incorporated into general tests for toxicity. These include investigation of toxicities in the immune, respiratory, and nervous systems and in the skin. The problems inherent in these systems and investigations are sketched out below. Immunotoxicity As with other organ systems, the function of the immune system may be enhanced or suppressed by xenobiotic chemicals. Unlike most other organ systems, the immune system is not a discrete organ but an interrelated set of tissues distributed throughout the body. It includes the thymus, bone marrow, Peyer’s patches, spleen, lymph nodes, and other lymphoid tissues. An effect on one part of this system may have contrary effects on other parts; consequently, interpretation of small change in one area is made more complex by the difﬁculties of predicting the impact on other parts of the system. This complicates study of immune responses to xenobiotics with the added problem that, in general, animals are poor models for human immunotoxicity, particularly, autoimmune reactions and hypersensitivity. With such a diffuse system, the best approach is to obtain a broad overview and then, if signiﬁcant change is seen, to focus on the areas of interest in speciﬁc mechanistic studies. Accordingly, it is generally recommended that a tiered approach be adopted, the ﬁrst tier being contained within the conventional toxicity tests. These examinations include differential leukocyte counts in peripheral blood, plasma protein fractions and the weights, and/or microscopic appearance of the lymphoid tissues. The distribution of lymphocyte subsets can also be examined

Determination: General and Reproductive Toxicology

143

by homogenization of tissues and ﬂow cytometry. However, these investigations may not give a deﬁnitive answer as to whether there are changes that are truly indicative of a signiﬁcant effect on immune function. The immune system is not static through the lifetime of an organism. The thymus involutes or atrophies with age and this is quite normal; however, acceleration of involution relative to controls or expectation may well imply an immunotoxic effect. A further layer of complexity is added, when it is considered that such atrophy is also a response to stress, although this is usually accompanied by changes in the adrenal glands. Immunotoxic investigations are additional to the normal assessment of skin sensitivity reactions, which are particularly useful for assessing workplace hazards and risk; these tests are discussed in greater detail in chapter 8. Extended testing may include assessment of antibody responses, cytokine production, and susceptibility to infectious agents in mice, the intention being to deﬁne the cell population affected and any dose–response relationship. With a full set of data an assessment of possible effect in humans may be made. Neurotoxicity The nervous system is toxicologically signiﬁcant because of the far-reaching effects of change, which is often irreversible. While other tissues, such as the liver, have extensive repair capabilities following toxic insult, this is absent or very small in the nervous system. Also in contrast to other tissues, the nervous system has a more limited functional reserve, meaning that a 15% reduction in nervous function is likely to be much more signiﬁcant than a similar reduction in renal or hepatic function. Detection of effects in the nervous system requires a range of special techniques that are often technically complex and require specialist interpretation. However, much can be done in a routine toxicity test as a ﬁrst tier of neurological assessment. Clinical signs, combined where appropriate with a functional observation battery (see chapter 5 for a description of this test), can lead to detailed neurological examination for reﬂexes, grip strength, coordination, gait, etc. Electroencephalography may prove useful, although the beneﬁts over a thorough neurological examination conducted by a veterinary surgeon should be considered ﬁrst. Similarly, ophthalmoscopic examinations may be supplemented by electroretinography, a rarely used method of assessing the electrical response of the retina to light impulses; it is time-consuming and technically demanding, both in conduct and interpretation. Assessment of the senses is very limited in general toxicology. Hearing may be tested using a whistle or other noise but the assessment is crude, as it is based on Preyer’s reﬂex (the ears pricking forward). The loss of hair cells from the cochlear is associated with hearing loss and to detect this, the use of scanning electron microscopy is recommended. The other senses, smell, taste, and touch, are not investigated routinely in toxicity testing due to the difﬁculties in assessing these functions in laboratory animals. In the blood, measurement of cholinesterases may indicate toxicity due to certain pesticides; however, after chronic administration, rats can show large

144

A Guide to Practical Toxicology 2nd Edition

decreases in activity without clinical evidence of effect. Organophosphates, which inhibit cholinesterases (as do carbamates), are classically associated with delayed onset neuropathy, which has been tested routinely in chickens. This is the species of choice for assessment of the target enzyme for this condition, neuropathy target esterase. Much emphasis is placed on histopathology, where the use of special ﬁxatives and stains with appropriate microscopic technique can be very informative. Respiratory Toxicology Essentially, this is the ﬁeld of toxicity resulting from inhalation of toxicants. Pulmonary toxicity as a result of systemic exposure, following administration by oral or parenteral routes, is not a common ﬁnding, paraquat being a prime example. The use of inhalation as a route of administration becomes important in assessing workplace hazards and, clearly, for medicines given by inhalation. Technically, inhalation is in a ﬁeld of its own due to the problems of generating (and monitoring) the correct atmospheres, administering these safely to the animals, and wasting them to the outside through suitable ﬁlters. The basic objective is to generate a respirable, uniform atmosphere from the test substance. It is important to determine the physical characteristics of the atmosphere generated and to calculate and sustain the correct rate of generation to achieve the desired dose or concentration. A relatively large proportion of inhaled material is eventually swallowed, giving a signiﬁcant oral component to the toxicity elicited. Rats are usually exposed for up to 6 hr/day, restrained in tubes ﬁxed onto a central cylindrical chamber so that only their noses protrude into the atmosphere that ﬂows through the apparatus. Whole-body chambers can be used, although these use larger amounts of test material and result in dermal and oral exposure. Dogs and NHPs are dosed through the use of masks. Intranasal administration is relatively straightforward and can be performed using droplets or an aerosol of test solution. Vehicles should be chosen with care to avoid local irritation. Although the rat is used as the rodent species in intranasal studies, the nasal turbinates of NHPs have been generally considered to be a better model for humans than the dog. However, ethical pressures have tended to reduce the use of NHPs unless there is another, more pressing, justiﬁcation, such as similarity of receptors or mechanism to those in humans. Dermal Toxicity Dermal administration is used less frequently than other routes but is relevant to the workplace and topical medicines. Species used include the rat, rabbit, and minipig, the last because the skin structure is close to that in humans. Careful choice of vehicle is essential as this has considerable inﬂuence on absorption of the test substance. In pharmaceutical toxicology, the formulation must be the same as or as close as possible to the clinical formulation to avoid any effects due to the vehicle. The potential toxicity of any excipients should be investigated by the use of sham-dosed controls in addition to a group that receives the vehicle

Determination: General and Reproductive Toxicology

145

only. Occlusion of the application site for several hours by wrapping the site in an impermeable dressing enhances absorption of the test substance and prevents ingestion. This is normal practice in acute studies and up to 28 days but is not recommended in longer experiments. Due to the absorption characteristics of the skin, the concentration of the test substance and the area of the dosing site tend to be more important than the dose in milligrams per kilogram, especially as dermal toxicity studies are usually undertaken in part to assess local tolerance or irritation or other effects due to the test article/vehicle combination. PITFALLS IN GENERAL TOXICOLOGY The major pitfalls in study conduct, which result in spurious results, are related to the timing of the various examinations. Electrocardiograms (ECG) can be expected to show two types of basic effect—pharmacological and toxicological. The pharmacological effects, wanted or unwanted, should be related to the presence of the test substance or an active metabolite and are generally seen in the few hours after administration. If effects are present 24 hours after dosing in treated animals, it may well be an indication of toxicity unless the elimination of the test substance is prolonged. The timing of ECG examinations is therefore important, based on what is required of the study. With current interest in QT prolongation, it makes sense to look at an ECG at the time of peak plasma concentration; examination after 24 hours should conﬁrm the absence and transience of any effect. ECGs are usually only recorded in nonrodents that are not sedated. The process of restraint and application of electrodes is, at the ﬁrst experience, a stressful process resulting in increased heart rate and blood pressure. It is useful to accustom the animals to the procedure by taking two or more recordings before the deﬁnitive measurements. Despite this, it is likely that heart rate and blood pressure will still be higher than normal and this can mask effects of the test substance. To avoid this kind of error, the use of telemetric implants or life-shirt systems are recommended. With these internally implanted devices or attached devices, it is possible to record a number of parameters such as locomotor activity, electrocardiograms, heart rate, arterial blood pressure, respiration, and body temperature, although not all at the same time. Collection of these data from unrestrained animals gives a better indication of variation from normality than when in the presence of an observer or under restraint. In animals, it is possible for cardiotoxicity to develop in response to excessive pharmacology and this must be taken into account in analysis of the data; toxicity without evident pharmacological cause needs careful interpretation. In nonrodents the timing of collection of blood samples for toxicokinetics relative to collection for clinical pathology is also critical; in rats, this is not such a problem because separate animals are generally used to avoid collection of excessive volumes of blood from the same animals. Samples for clinical pathology should always be collected before those for toxicokinetics, if the same animals are to be used. The controls in rodent studies are not usually subjected to the same sampling regimen for toxicokinetics as the treated groups. In addition, it should

146

A Guide to Practical Toxicology 2nd Edition

be noted that there is increasing requirement for analysis of control samples in toxicokinetic studies, especially for pharmaceuticals. Varying sampling regimens and stress between controls and treated animals may introduce confounding factors. This could include a mild anaemia, found at clinical pathology, which is not present in the controls but is not treatment-related. In two-week studies, with intensive toxicokinetic sampling in nonrodents, there may not be sufﬁcient time between day 1 samples and clinical pathology, and day 14 toxicokinetic samples for complete recovery. If blood samples are taken immediately before the start of the treatment period from dogs or NHPs followed by day 1 toxicokinetic sampling, the sampling stress on the animals becomes signiﬁcant and may complicate interpretation of the clinical pathology data. Age and sexual maturity may present problems in the interpretation of general toxicity. For instance, beagle dogs become sexually mature between the age of 7 and 12 months. In shorter studies conducted with sexually immature animals at the start of the treatment, this is likely to mean that there would be a range of sexual maturity when the study ends. As group size is small in shorter studies— usually only three per sex per group—it is possible for the distribution of animals to be uneven across the groups. In this case, a sexually mature control group may compare with sexually immature treatment groups, implying a treatment-related effect, which is entirely due to differences in maturity rather than an effect on testicular development. Spermatogenesis is very similar across the species and effects are likely to be relevant to man unless a species-speciﬁc factor such as metabolism or pharmacokinetics is present. The implication is that short studies in dogs should be conducted with sexually mature animals, with testicular development being examined in longer studies conducted with animals that are sexually immature when the treatment period starts. Although it is desirable to show toxicity, to give an estimation of the dose– response curve for a test substance, this is not always possible. In some cases, this is due to genuinely low toxicity even at high doses; here it is necessary to demonstrate absorption and adequate systemic exposure. Some drugs intended to have a local action in the lumen of the gastrointestinal tract may not be absorbed, but this is probably beneﬁcial. For low-toxicity compounds that are not absorbed after oral administration, it may be necessary to use the intravenous route to elicit toxicity, if that is considered essential. In contrast, there are instances where the acute pharmacological action is so intense that it becomes a toxicological effect in its own right. In these cases, anesthetics and narcotic drugs being good examples, it may be impossible to demonstrate any toxicity apart from the excess pharmacological action. Poor choice of test substance form or formulation can be a pitfall in any toxicity study. Particle size can be a limiting factor in absorption and thus in toxicity, micronizing a test material or changing the carrier system or vehicle can cause a radical increase in toxicity. Such changes should be avoided in the middle of a program unless some form of sighting or bridging study is conducted with the new form or formulation to ensure continued lack of effect.

Determination: General and Reproductive Toxicology

147

“THE RIVER OF REPRODUCTION” Oocyte maturation and ovulation Spermatogenesis and sperm maturation

Mating and fertilization Preimplantation development Implantation Embryo/fetal development Birth Postnatal development

Figure 1 River of reproduction. Source: Courtesy of Newall, Derek, 1999.

Another factor to consider is the correct choice of examination for the test species being used. This is particularly true with clinical pathology where there are signiﬁcant differences between species in the plasma activity of some enzymes. For instance, alkaline phosphatase is variable in cynomolgus monkeys, and leucine aminopeptidase is very often preferred for that reason. Marmosets have very low activities for alanine aminotransferase and gammaglutamyl transpeptidase is very low in rats. In the ﬁnal analysis, correct study design and interpretation will avoid the majority of these pitfalls and will facilitate interpretation of the whole data package. When reviewing a study report, it is important to understand where such problems can arise and to allow for them in your interpretation, bearing in mind that the pitfalls seen may not be included in the above analysis. REPRODUCTIVE TOXICOLOGY General Principles in Reproductive Toxicology The intention in studies of reproductive toxicology is to assess the potential for adverse reproductive effects in humans due to exposure to chemicals, whether as a result of intentional (drugs and food additives) or unintentional exposure (pesticides and other chemicals). In contrast to general toxicology, which has a very broad approach to toxicity testing, the endpoints in reproductive toxicology are much more deﬁned and there are speciﬁc stages to examine and evaluate. The reproductive process and its various stages are illustrated in Figure 1.

A Guide to Practical Toxicology 2nd Edition

cell migration

continued growth

implantation

cell proliferation fertilization

Degree of Sensitivity

cell differentiation

148

Functional Maturation Histogenesis Organogenesis

10

20

30

40

Birth

50 60 Days

Embryonic period

70

80

90

280

Fetal period

Figure 2 The stages of human embryogenesis. Source: Adapted from Ref. 3.

Despite this relatively simple deﬁnition of endpoints, reproduction is immensely complex and can be affected in many ways. Toxicity can occur during any part of the process and the various tests are designed to examine every stage of the cycle in digestible chunks. However, there is enormous scope for different effects on reproduction. There may be indirect or direct effects on the gonads, which have dual function as the source of the gametes and of sex hormones, the secretion of which is controlled by the pituitary. After gametogenesis, variations in behavior, fertilization or effects on the processes of gestation can also inﬂuence the ﬁnal outcome. The net result of this is that presence of an effect at one stage of the sequence does not necessarily pinpoint the origin of that effect; consequently, further investigation is needed to elucidate mechanisms and facilitate risk assessment. Where effects are seen, it may become necessary to break the process down further to determine the location of the effect, in terms of time and place. This element of timing is unique to reproductive toxicity, especially with respect to teratogenicity. For example, thalidomide was associated with reproductive effects in humans when given in weeks 4 or 5 of pregnancy. From the time of implantation until closure of the palate, the organs develop in the foetus according to a well-deﬁned pattern and timing. Accordingly, treatment of a pregnant rat with a teratogen on day 8 of gestation will produce a different spectrum of effects in comparison with treatment on day 12 (Figure 2). Timing of treatment is also

Determination: General and Reproductive Toxicology

149

important in spermatogenesis, where single treatment may affect only one stage of the spermatic cycle. It is increasingly recognized, that the visible processes of organogenesis are matched by biochemical changes that have profound inﬂuence on the toxicity of compounds in the foetus or neonate in comparison with an adolescent or an adult (4–6). Pregnancy is associated with a wide range of physiological changes that affect the ADME of chemicals. Total body water and lipid are increased, associated in the former case with an increase in plasma volume. Because the total red cell population increases to a lesser extent than plasma volume, the effect is to reduce the red cell count to near anemic levels. There is an increase in the extracellular space, which, with the increase in total body lipid, increases the available volume of distribution of chemicals. The body lipids accumulate over the early part of the gestation and are used in the latter part. Thus, where there is accumulation of lipid-soluble chemicals into the adipose tissue, rapid release late in gestation can lead to increased plasma concentrations, which have the potential for adverse effects in the mother and foetus. Plasma concentrations of albumin, important in reducing the free concentration of chemicals in the plasma by binding, are lower in pregnancy, partly due to the increase in plasma volume and partly due to decreased total body content. Examples of reproductive effects with particular substances include testicular atrophy seen with the fumigant dibromochloropropane, teratogenicity with vitamin A or alcohol, transplacental carcinogenesis with diethylstilbestrol, and many more. Indirect effects through hormonal imbalance are also a frequent cause of reproductive toxicity and specialist studies may be needed to investigate these. The presence of compounds that accumulate in animals is an environmental issue of some concern; for example, many organochlorines have been found to accumulate in marine mammals, although the effects of these have not necessarily been elucidated (7). Until recently, reproductive toxicity was relatively resistant to mechanistic explanation in contrast to other toxicities, although the number of elucidated mechanisms is increasing. Broadly, agents that affect cell division, apoptosis, membrane integrity, and other factors that are essential to organ differentiation and development are likely to have effects on the foetus. Hormonal disturbance may affect fertility, parturition, and lactation, and straightforward pharmacological action may impact on normal behavior at any point to disrupt normal reproductive processes. Test Systems for Reproductive Toxicology The thalidomide tragedy had a huge inﬂuence on the choice of test species for assessment of reproductive toxicity, leading in particular to the use of the rabbit, which was sensitive to its effects. As indicated in Table 4, the rat, rabbit, and mouse are the principal test systems for examination of reproductive toxicity. Although the nonhuman primate and minipig are used in studies to evaluate effects during gestation (developmental toxicity studies), they are used only in special

150

A Guide to Practical Toxicology 2nd Edition

Table 4 Stage of Reproductive Cycle and Preferred Test Systems Stage of cycle

Test system

Fertility and mating Organogenesis—in vivo

Rat or mouse Rat or rabbit. Alternatives are mouse, minipig, or nonhuman primate Whole embryo culture, limb bud assay Rat or mouse

Organogenesis—in vitro Late gestation, parturition, and early development Source: Adapted from Ref. 1.

circumstances. In general, the placental structure of animals used in assessment of reproductive toxicity is not the same as in humans, although this may not be a factor that is always signiﬁcant. A summary of the various test systems that are in reasonably regular use is shown in Box 3. Overall, there is no escaping the general acceptance, especially by regulators, of the rat, rabbit and, to a lesser extent, the mouse as models for reproductive toxicity. They have the advantages of availability, size, length of reproductive cycle, and a level of understanding that is not so clear for the other systems. For all models, it is essential that there be a large amount of in-house historical control data to facilitate interpretation of the study data. In addition, this database has to be kept up-to-date by performance of new studies, in order to compensate for drift in the strain of animal used. Box 3 Characteristics of Test Systems for Reproductive Toxicology r Rat and mouse: The reproductive cycle is completed relatively quickly; they do not hesitate to mate in laboratory conditions; relatively large litters are produced after a conveniently short gestation (about 20 days); inexpensive and easy to maintain; there is a wealth of historical control data. However, the rat produces a very large number of sperms in comparison with humans and, consequently, a relatively large reduction in sperm number or quality is necessary before effects are seen. Rats are the preferred rodent species for use in studies of embryotoxicity. r Rabbit: The rabbit is a reasonable size and reproduces readily in laboratory conditions; gestation is relatively short at about 30 days; litter size is generally good; there are good historical control data for a number of strains. Disadvantages include their intolerance of compounds such as antibiotics or with chemicals that disturb their alimentary canals, including several vehicles, such as oils. They are not used in other reproductive studies but they are ideal for longitudinal studies of the sperm cycle. r Minipig: The use of the minipig is increasing in teratogenicity studies and there may be a future for them in fertility studies. They have a clear advantage when the rabbit cannot be used due to rabbit-speciﬁc

Determination: General and Reproductive Toxicology

151

effects, although the mouse is the known alternative; gestation at about 115 days (3 months, 3 weeks, and 3 days) is long and litter size is small (ﬁve or six). If they are used as the nonrodent species in the general toxicity studies, the reproductive studies can be done in the same species. However, they are large (approximately 35 kg) and so require large amounts of test material and more extensive housing. They require skill in dosing and in sample collection. They are particularly suited to dermal studies. r NHPs: Used occasionally as an alternative nonrodent, but expense and availability limit their use. The usual species is the cynomolgus monkey; although marmosets have been investigated as an alternative, they are not used in regulatory toxicology. The rhesus monkey has been used but is a seasonal breeder, while the cynomolgus can breed at any time of year due to a menstrual period of about 30 days. Litter size is small and gestation is long with a high miscarriage rate, meaning more animals are needed. The testicular physiology of the cynomolgus testis is said to be a good model for humans and fetal malformation frequencies have been quoted at around 0.5%. Normal practice is to remove the foetuses via cesarean section and then to allow the mother to recover for reuse in another study. Phylogenetic proximity does not mean necessarily that they are good models for humans in terms of ADME. r Alternatives: There is a number of in vitro systems for assessment of teratogenicity but none have been validated sufﬁciently for regulatory purposes. Whole-embryo culture is one of the best of these and has particular use when screening members of a series of compounds that are known to come from a teratogenic class, for instance, retinoids. In this case the assay may be used to aid selection of lead candidates for development from a teratogenic series. The micromass assay is a variation on the whole-embryo culture theme, which uses primary cell cultures from the limb bud or brain. There is also an assay that uses Hydra but use of this has not been pursued. Chick embryos have also been used occasionally.

Reproductive Toxicity In Vitro The various alternative models indicated in Box 3 are useful as screening methods in candidate selection. However, none of these in vitro systems have yet been accepted by regulatory authorities as a satisfactory alternative to whole animal experiments. They lack the complex interrelationships that exist between the mother and the foetus and between the various tissues and dynamics in each. Other systems that might appear to have value in teratogenicity testing, such as metamorphosis in amphibians or invertebrate larval stages, have not been widely investigated, although the fruit ﬂy, Drosophila, has been used in some experiments. Other possibilities include ﬁsh and chick embryos, the latter

152

A Guide to Practical Toxicology 2nd Edition

having been investigated as a screening system. Another possibility for the future is the nematode Caenorhabditis elegans; the complete cell lineage for this 900-cell organism has been elucidated. Care is needed in the collection of data and interpretation of these assays. There are also systems based on fragments of reproductive tissues (e.g., isolated seminiferous tubules), which can be used to investigate functional aspects of particular parts of the reproductive system, including the effects of one cell type on another. These specialized studies may be technically demanding and not readily transferable from one laboratory to another in a reproducible manner. These alternatives were reviewed in 1997 by a British Toxicology Society working party (8). A positive result does not necessarily stop development of a chemical but merely emphasizes the possibility of reproductive effect, leading to an appropriate change in study timing. Several in vitro assays for reproductive toxicity have been validated by ECVAM; these include the embryonic stem cell test, the micromass test and whole embryo culture. The embryonic stem cell test takes advantage of the fact that embryonic stem cells differentiate in culture and studies the inhibition of differentiation. The test uses permanent mouse cell lines; embryonic stem cells to represent embryonic tissue and, for comparison, a line of ﬁbroblasts to represent adult tissue responses to cytotoxicity. The test looks at three endpoints: inhibition of differentiation of the stem cells into cardiac myoblasts and inhibition of growth of both cell lines. Growth inhibition is studied in both cell lines as the embryonic stem cells have been shown to be more sensitive than adult cells. The micromass test uses cultures of limb buds isolated from pregnant rats and tracks the inhibition of cell differentiation and growth. The test is considered to be useful in identifying the more potent embryotoxic chemicals and should not be viewed as a replacement method. The test is based on the tendency by undifferentiated mesenchyme cells in limb buds to form foci of differentiating chondrocytes. The inhibition of the formation of these foci is the test endpoint. The formation of cartilage by chondrocytes is an important process in the formation of the skeleton, and inhibition of cell proliferation and differentiation, intercellular communication and interactions with extracellular matrix are thought to be parts of this process. Whole embryo culture has also been validated and is, intuitively, a more complete test system than the two preceding tests as it uses complete embryos instead of isolated cell lines or components of embryos. The assay uses embryos isolated from pregnant rats on day 9 or 10 of gestation. The isolated embryos are cultured for 48 hours during a period of major organogenesis and are then examined for heartbeat, yolk sac circulation and size, length of head and crown to rump, the number of somites are scored morphologically, with assessment of any abnormalities that may be present. Although this test is more complete than the others described brieﬂy here, it is still not seen as a replacement for conventional reproductive toxicity studies.

Determination: General and Reproductive Toxicology

153

Reproductive Toxicity in Other Studies Reproductive effects may also be assessed in the course of general toxicity studies through records of estrus in nonrodents, plasma hormone analysis, organ weights, and histological examination. Testicular staging, in which the presence of the various stages of spermatogenesis is assessed, is a possible addition to routine toxicity studies of four weeks or longer. Although many chemicals will show effect within four weeks, some may take longer and treatment for at least one full spermatogenesis cycle is desirable. In practice, this means a 13-week study.

STUDY DESIGNS FOR REPRODUCTIVE TOXICOLOGY As indicated, the process of reproductive toxicity assessment is broken up into manageable chunks, addressing fertility, embryonic development or fetal toxicity (teratogenicity), and peri- and postnatal development including maternal function. A full program in rats will cover the 63 days before mating in the males and may run into two generations, with continuous treatment of all animals up to weaning of the ﬁnal litters (F2 generation). Such studies are lengthy and produce vast amounts of complex data. Basic Design As with general toxicology, the standard design is for three treated groups with an untreated control. In the same way, doses are chosen after an appropriate set of sighting studies. (For the rat the general toxicity studies are generally adequate for this, although it may be wise to perform a sighting study in pregnant animals to conﬁrm dose choice.) In rabbits, it is also usual to perform a small sighting study in nonpregnant animals and then to conﬁrm in a few pregnant animals. The chief design driver in reproductive studies is the stage of the cycle under examination. This determines length and timing of treatment and, to a large extent, the type of examination undertaken (Fig. 2). Specialist design becomes necessary if, for any reason, it is not possible to carry out a normal study due to the expected effects of the test substance; in this case, the studies have to be broken up into individual stages. The designs of three main types of reproductive study are summarized in Box 4. The duration and timing of the treatment period is relatively ﬁxed, due to the time constraints of the processes examined. In rats, the spermatogenesis cycle is approximately 63 days. However, even with signiﬁcant testicular toxicity, rats can be successful sires due to the large number of sperms produced. Histological examination is a good method for detecting effects in the testis; because the process of spermatogenesis is very similar between species, effects in one may be indicative of potential effect in humans. Differences in effects may, however, arise through differences in pharmacokinetics or metabolism.

154

A Guide to Practical Toxicology 2nd Edition

Premating treatment in fertility studies is generally 28 days, with the possibility of increasing this to 63 days if effects are expected. In embryotoxicity studies, the treatment period is chosen to last from implantation until closure of the palate, which is approximately day 15 of gestation in the mouse, day 16 in the rat, and day 18 in the rabbit. However, it should be noted that the day of palate closure can vary slightly between strains and this should be accounted for in the study design. Following closure of the palate, there is a treatment-free period until just before natural parturition, when the dams are killed and their uterine contents are examined. In minipigs, treatment is from day 11 to 35 with examination of uterine contents on day 110 of gestation. The treatment period in pre- and postnatal development studies in rats is from day 6 of gestation to weaning of the litters; males are not treated.

Box 4 Outline Designs for Some Example Reproductive Studies Note that these are examples only and should not be taken as the only option. Guidelines such as those for ICH and OECD (9) (see Web sites given in the appendix) give preferred designs according to chemical class and use. r Rabbit (oral gavage) developmental toxicity study: Four groups of 20 females. Time-mated (day 0). Dosed from day 6 to 18 of pregnancy. Clinical observations daily. Bodyweights on days 0, 3–18, 22, 25, and 28 of pregnancy. Food consumption daily from days 3 to 6, then every 2 days. Postmortem examination on day 28 of pregnancy–parental females examined, gross abnormalities retained; foetuses-–external, visceral, and skeletal examination and then retained. r Rat (oral gavage) fertility & embryonic development study Four groups of 25 males and 25 females. Dosed for: (a) males–28 days premating, through mating and to necropsy; (b) females–14 days premating, through pregnancy to day 17 of gestation. Clinical observations daily. Bodyweights: males twice weekly, females twice weekly pre-mating then daily to necropsy. Food consumption–males weekly, females weekly premating then at appropriate intervals during pregnancy. Post-mortem examination on day 20 of gestation; parental animals–males testes and epididymides retained; gross abnormalities retained; foetuses—external, visceral, and skeletal examination. r Rat peri- and postnatal development study Four groups each of 25 mated females treated from day 6 of pregnancy to day 20 postpartum; 20 males and 20 females selected from F1 per group (not treated) and reared to sexual maturity and mated; necropsy on day 13 of gestation. Examinations are similar to those on other studies and may vary according to protocol.

Determination: General and Reproductive Toxicology

155

Mating There are three methods of obtaining pregnant animals for reproductive studies, natural mating, artiﬁcial insemination, or buying in time-mated animals from a supplier. Which method is used depends largely on the personal preferences of the laboratory performing the study. Natural mating, preferably using one male to one female, has the advantage that proven males can be used and that the sire of each litter is known; this means that particular abnormalities can be traced back to speciﬁc animals. Although successful and simple, natural mating requires the maintenance of an adequate stock of reproductively proven males. Artiﬁcial insemination uses pooled semen from several animals and so the sire cannot be identiﬁed for each litter. Time-mated animals from suppliers are increasingly used and provide a good source of pregnant animals at reasonable reliability; these animals are mated naturally, offering the same advantages as in in-house mating without the need to maintain stud males. Sires can be traced and abnormalities ascribed to them, where appropriate. Group Sizes The ICH pharmaceutical guideline on Detection of Toxicity to Reproduction says that there “is very little scientiﬁc basis underlying speciﬁed group sizes in past and existing guidelines nor in this one” (10). Number of animals per study is chosen to give a satisfactory number of litters for evaluation and have been suggested as providing the best compromise between insensitivity in terms of detection of low incidence effects and large number of animals, which may not increase the statistical sensitivity of the test. As always in toxicology, if the effect to be demonstrated is one with a high incidence, fewer animals are needed than for a rare event. It is, however, unusual to embark on a reproductive study with the sole intention of investigating a single effect. In an embryotoxicity study, the typical number of animals per group is 24 rats or 20 rabbits. Minipig studies inevitably use smaller numbers, for example, 12 females per group, which results in nine or ten litters of ﬁve to six. In rats, if the study includes investigation of more than one generation, it is likely that more animals will be needed to ensure that there are sufﬁcient F1 litters at each treatment level from which to choose the males and females for mating to produce the F2 or subsequent generations. Parameters Measured in Reproductive Toxicology Measurement of food consumption and bodyweight and recording of clinical signs is common to all study types in vivo. Record of litter size together with sex and weight is also a feature of all reproductive studies. Clinical pathology is not normally performed and histopathology may only be carried out on selected adults and offspring in multigeneration studies. Each arm of the reproductive study program has its particular parameter measurements that may be loosely grouped

A Guide to Practical Toxicology 2nd Edition

156

Table 5 Reproductive Parameters Fertility

Embryonic development

Both sexes Time to mating Females

Females only Litter size Number and position classiﬁed as early resorptions, late resorptions, dead or live foetuses.

Litter size Fetal sex Number and position of implantations. Number of corpora lutea

Pre- and postnatal development Dams Length of gestation Onset and duration of parturition.

Observe through lactation; necropsy at weaning. Number of copora lutea

Litters

Weight of gravid uterus and placentae

Number of pups, external malformation, bodyweights. Survival

Fetal weights and sexes (live foetuses) Fetal abnormalities—external, visceral, and skeletal.

Opening of eyes and pinnae, pupil and righting reﬂexes, startle response. Learning test in swimming maze (post weaning). Ophthalmoscopy, preyer’s reﬂex, locomotor activity. Sexual development and mating with necropsy of females on day 13 of gestation—numbers of corpora lutea and position and numbers of implantations.

Source: Adapted from Ref. 1.

based on fertility, embryonic development, and pre- and postnatal development, which includes examination of maternal function up to weaning; these are listed in Table 5. Fertility The origin of the gametes is a factor in the sensitivity of the sexes to reproductive toxins. In the female, the ovarian germ cells are present before birth and decrease with age, being a pool of ﬁnite size that can be depleted, but not replenished. In

Determination: General and Reproductive Toxicology

157

the male, spermatogenesis is a process that is continuous from the point of sexual maturity, a factor that allows recovery according to the extent of the toxic insult. In a fertility study, mating behavior is assessed by recording the time taken to successful mating. Lack of mating can be investigated by pairing unmated females with successful males from the same group, while unmated males are paired with untreated females. The number and distribution of implantations in uterine horns, classiﬁed as early resorptions, late resorptions, dead or live foetuses, is recorded to assess effects in utero, together with the numbers of corpora lutea in the ovary. Preimplantation losses are calculated by subtracting the number of implantations from the number of corpora lutea. For the males, assessment of sperm quality is increasingly recommended by sperm counts, motility, morphology, and quality. Testicular weight is a sensitive indicator of male effect and can be supported by histological processing and examination. Computer Assisted Sperm Assessment generates a large amount of data, which may not be fully understood, making interpretation difﬁcult; it has been enthusiastically supported by regulatory authorities, presumably in the questionable belief that volume of data gives added security in assessment of prospective safety. However, the initial enthusiasm has not been matched by routine use; the use of this technique should be balanced against what can be revealed by alternatives such as testicular staging in routine toxicity studies (11). Embryonic Development Fetal weight gives an indication of maternal or placental function and of any retardation in development that has taken place. Smaller foetuses may have skeletal variations from controls that are a product of slower development rather than direct teratogenicity. The foetuses are assessed for abnormality by visceral or skeletal examination. Visceral development can be assessed by Wilson’s sectioning of foetuses ﬁxed in Bouin’s ﬂuid (not in rabbits), but this has increasingly been replaced by or combined with microdissection. Dissection of other foetuses may also be performed before the carcasses are cleared with potassium hydroxide and stained with Alizarin red, which stains bone red for skeletal examination, and alcein blue for cartilage. Not all the parameters listed in Table 5 are universally applied; for instance, placental weight is rarely affected, although some classes of drugs have been known to produce differences from controls, notably some cardioactive substances. The weight of gravid uterus is useful for assessing effects on carcass weight, by subtraction of the uterus weight from the complete bodyweight immediately before necropsy. Structural congenital abnormalities that potentially impair the survival or constitution of the foetus are classiﬁed as major abnormalities. Other defects are classiﬁed as minor abnormalities. Commonly observed variations in the degree of ossiﬁcation from that expected of a day 20 gestation foetus, together with common variations in the extent of renal pelvic cavitation and ureter dilation are recorded as variants. In some foetuses, an extra “wavy” rib may be seen; the signiﬁcance of these has been widely debated down the years but they are now considered to be

158

A Guide to Practical Toxicology 2nd Edition

without developmental signiﬁcance. Embryofetal examinations in the rabbit are similar to those described above for the rat, with the exception that the head is treated and examined separately. All rabbit foetuses are dissected and cleared for skeletal examination. Peri- and Postnatal Development—Multigeneration Studies This type of study is among the most complex toxicity studies conducted and can be made more complex by the addition of extra generations and longer treatment periods. In the simpler of these studies, treatment ceases when the F0 females give birth. In multigeneration studies, usually conducted with agrochemicals or food additives, treatment may be continued throughout the study until termination of the F2 pups. It is possible to continue such studies into a carcinogenicity assessment by continued treatment of the F2 generation, although such studies are rare, due to complexity and expense. Mating performance is assessed in a similar manner to fertility studies. For the dams of the F0 and subsequent generations, the records of length of gestation and onset and duration of parturition are probably self-explanatory. The performance of the dams through lactation, coupled with the survival of the pups and their bodyweight gains during lactation are also an indication of maternal function. In the studies where parturition is examined, the survival of the pups to day 4 postpartum is checked. At day 4, the litter size may be reduced, where necessary, to four males and four females to obviate effects on postnatal development that may be attributable to large or uneven litter sizes. The pups are examined for external abnormalities, and their development is charted according to the time of achievement of a series of physical, sexual, and sensory milestones—opening of eyes and detachment of pinnae, eruption of incisors, vaginal opening and balanopreputial separation, pupillary and righting reﬂexes, and startle response. Learning ability is usually tested in a simple Y- or E-shaped swimming maze after weaning. An open ﬁeld test is performed looking at general activity and exploratory behavior; locomotor activity is assessed by performance on a rotating rod. Reproductive function is assessed by mating of the F1 pups.

PITFALLS IN REPRODUCTIVE TOXICOLOGY Although fertility studies are usually performed in rats, this should not be taken as the only method to assess male fertility. The rat produces approximately four times as many sperms per gram of testis than a man and is correspondingly less sensitive to effects on spermatogenesis. The mouse produces about three times more sperm than the rat. The use of data from routine toxicity studies in conjunction with those from reproductive studies gives an overview of testicular effects and so of the necessity for more specialized mechanistic studies. In using the results of testicular histopathology from routine toxicity studies, the effects of age at the start of treatment and uneven sexual maturity at the end of the study period, as referred to above for general toxicology, should be remembered.

Determination: General and Reproductive Toxicology

159

The rat is a robust species in which most compounds can be investigated in a wide range of vehicles, including oils. The rabbit’s gastrointestinal physiology, however, means that it is unable to cope with compounds or vehicles that disturb the physiological balance or osmotic environment in the gut. In essence, this means that antibiotics should be tested in other species such as mouse, minipig, or nonhuman primate and that lipid-soluble substances must be used as a suspension in an aqueous vehicle, with attendant problems of suboptimal absorption. Compound type is also a consideration. As indicated, rabbits are sensitive to antibiotics and hormonally active compounds may be inappropriate in rats or rabbits where the ovaries are responsible for maintaining hormonal control of gestation; in humans and primates this is carried out by the placenta. Selection of an inappropriate species may result in toxicity at doses so low that they approach expected human exposure or dosing levels or may, in rare cases, fall below it. This situation, which gives no margin of safety over human usage, is unsatisfactory and makes safety evaluation difﬁcult; in these cases, the risk/beneﬁt of the drug and indication for which it is intended should be considered. An alternative to these species is the cynomolgus monkey, although its use should be carefully considered against that of alternatives such as the minipig. Various aspects of the reproductive process mean that it is subject to disruption by substances such as hormone derivatives or cytotoxic agents. With compounds such as these, it may become necessary to break the studies down into speciﬁc stages either to minimize the length of the treatment period or to investigate particular parts of the reproductive cycle. For instance, the fertility study usually requires mating of treated males with treated females; in some cases, it may be necessary to treat both sexes but to mate them with untreated partners. Effects on maternal function may be investigated by fostering the offspring of treated females on untreated females and vice versa. In dietary multigeneration studies, toxicity in the dams may be encountered during late lactation when there is a marked increase in food consumption. Transplacental carcinogenesis, as shown by diethylstilbestrol, is an uncommon effect, or at least has not been demonstrated to be detectable over normal background incidences of cancers, and is unlikely to be demonstrated by routine reproductive studies, as the effects do not become apparent until the offspring are adult. However, multigeneration studies go some way toward addressing this problem. Where there is some retardation of fetal development, for instance, due to lowered maternal food consumption or another indirect effect of treatment, there may be variations from control values, particularly in weight and/or skeletal development. These are not teratogenic effects, but merely an indication of indirect toxicity. In similar ways, neurologically active compounds may affect maternal behavior or lactation and have indirect effects on pup survival through reduced maternal care. These compounds may also have indirect effects on fertility, if they affect mating behavior to the extent that mating is delayed or completely unsuccessful.

160

A Guide to Practical Toxicology 2nd Edition

REFERENCES 1. Woolley A. A Guide to Practical Toxicology, 1st ed. London: Taylor and Francis, 2003. 2. Evans GO, ed. Animal clinical chemistry—A primer for toxicologists. London: Taylor & Francis, 1996. 3. Timbrell J. Principles of Biochemical Toxicology. London: Taylor & Francis, 2000. 4. McCarver DG, Hines RN. The ontogeny of human drug-metabolizing enzymes: Phase II conjugation enzymes and regulatory mechanisms. J Pharmacol Exp Ther 2002; 300(2):361–366. 5. Rasheed A, Hines RN, McCarver-May DG. Variation in induction of human placental CYP2E1: Possible role in susceptibility to fetal alcohol syndrome. Toxicol ApplPharmacol 1997; 144(2):396–400. 6. Koukouritaki SB, Simpson P, Yeung CK, et al. Human hepatic ﬂavin-containing monooxygenase 1 (FMO1) and 3 (FMO3) developmental expression. Pediatr Res 2002; 51(2):236–243. 7. Vos JG, Bossart GD, Fournier M, et al. eds. Toxicology of marine mammals. Taylor and Francis, 2003. 8. British Toxicology Society Working Party. Report on in vitro toxicology. Human Exp Toxicol 1997; 16(Suppl 1). 9. OECD guidelines for testing of chemicals. Available at www.oecd.org 10. ICH. Guideline on Reproductive Toxicity. ICH Guideline 2005; S5(R2) http://www.ich.org. 11. Creasy DM. Evaluation of testicular toxicity in safety evalutaion studies: The appropriate use of spermatic staging. Toxicol Pathol 1997; 25(2):119–131.

7 Determination: Genotoxicity and Carcinogenicity

GENOTOXICITY General Principles in Genotoxicity The intention in testing for genotoxicity is to determine the potential for damage to DNA and thereby to highlight any effects that might, with administration or exposure, lead to an increased incidence of tumours or birth defects through heritable effects in the germ cells. In the latter context, it is worth considering that changes in chromosomal number are usually fatal in laboratory animals but not in humans where conditions, such as Down’s syndrome, are associated with an extra chromosome but do not lead to abortion. The genetic changes associated with some cancers are given in Table 1 (1). Though individual genetic disorders are rare, collectively they comprise over 15,500 recognized genetic abnormalities and affect approximately 13 million Americans. For instance, 3–5% of all births result in congenital malformations and 20–30% of all infant deaths are due to genetic disorders, while 11.1% of pediatric hospital admissions are for children with genetic disorders and 18.5% are children with other congenital malformations. In adults, 12% of hospital admissions are for genetic causes and 50% of mental retardation has a genetic basis. Among chronic adult diseases, 15% of all cancers have an inherited susceptibility, and 10% of the chronic diseases (heart, diabetes, arthritis) that occur in the adult populations, have a signiﬁcant genetic component. Given this context, the assessment of the potential for new or existing chemicals to cause genetic damage is an important area of toxicological testing. This is the main area of toxicological investigation in

161

A Guide to Practical Toxicology 2nd Edition

162

Table 1 Genetic Associations with Cancers Proto-oncogene

Activation by

c-myc

c-H-ras c-K-ras

Genetic rearrangement Genetic rearrangement Point mutation Point mutation

N-myc

Gene ampliﬁcation

c-abl

Chromosomal change Translocation: 8–14, 8–2, or 8–22 Translocation: 9—22

Associated cancer Burkitt’s lymphoma Chronic myeloid leukemia Bladder carcinoma Lung and colon carcinoma Neuroblastoma

Source: Courtesy of Dr. Mike Kelly (personal communication) and adapted from Ref. 1.

which in vitro testing has been accepted, principally, on the basis of the relatively simple endpoints that are examined in these tests. Testing for genotoxicity or mutagenicity, in a regulatory context, became much more frequent in the early 1970s when Bruce Ames developed the bacterial reversion assay or Ames test. This simple test, using specially derived strains of Salmonella typhimurium for which histidine is an essential amino acid, determines the ability of a chemical to produce mutations that allow the bacteria to grow in the absence of histidine. The basic hypothesis was that carcinogenesis originated through damage to DNA and chemicals that damage DNA are more likely to be carcinogenic than those that do not. The problem with this is that, while there is good correlation between mutagenesis and carcinogenesis, not all carcinogens damage DNA directly and these are not readily detected by current methods that determine direct toxic effects on the DNA. The attraction of genotoxicity testing is that it offers a method of assessing carcinogenic potential that is quick, inexpensive, usually in vitro, and can be performed early in the development of a chemical. This contrasts with the traditional approach, which is the use of long studies in rodents that can take 2 years to complete, are expensive, and conducted later in development. With the realization that the simplistic Ames test system examined only one endpoint in bacteria and resulted in a number of false-positives, an increasingly large number of tests were developed to examine the effects on DNA in other ways. A more recent development has been that of determination of structure–activity relationships and the computerized prediction by expert systems of mutagenic potential. This is achieved by examination of the test structure for the presence of structural components or groups that have been associated with mutagenicity in other compounds. These are discussed in more detail later in the chapter on prediction (see chapter 12). Testing for genotoxicity acknowledges that there are basically two levels of effect—at the gene level and at the chromosome. At the former mutations are

Determination: Genotoxicity and Carcinogenicity

163

sought that lead to localized changes at one or a few bases in the DNA, thereby changing the coding for the protein produced by the gene. A change from one base to another, or the misreading of a chemically altered base, may lead to a different amino acid being inserted into an otherwise normal protein; this is a point mutation. When a base or base pair is inserted or deleted, this is known as a frameshift mutation, as the reading frame of the code is changed, leading to an abnormal protein product. At the level of the chromosome, the changes are broadly in terms of structure or number; there may be changes in number due to effects on mitosis or meiosis and translocations, rearrangements, breaks, or gaps, which indicate an effect on the chromosomes themselves. DNA or chromosomal damage is detected directly or indirectly. Direct evidence comes from the induction of genetic change, such as the ability of Ames test bacteria to divide in the absence of a previously essential amino acid, or by examination of chromosomes in metaphase where breakages and abnormalities are evident under the microscope. Indirect evidence of genetic damage may be obtained by measurement of DNA repair in tissues. This is easier to detect in tissues that do not normally divide and is used in the assessment of unscheduled DNA synthesis (UDS) in hepatocytes. The majority of chemicals are not directly genotoxic and one disadvantage of a bacterial system in vitro is that the bacteria lack the enzymes that are responsible in mammals for the activation of chemicals to toxic metabolites. Consequently, a metabolizing system was devised that uses the microsomal fraction from homogenized rat liver, which contains the majority of xenobiotic metabolizing enzymes; this is known as S9 mix. For normal regulatory purposes, this is prepared from the livers of rats treated with an enzyme-inducing agent, such as repeated doses of ␤-naphthoﬂavone and/or sodium phenobarbitone or Arochlor 1254 (although this is used less often now). In some cases, S9 mix may be prepared from other tissues such as kidney or with the use of other inducing agents. One factor to consider is that S9 has its own intrinsic toxicity and that incubation of mammalian-derived cells should be limited to a few hours. S9 mix is rich in the microsomal elements of metabolism typiﬁed by cytochrome P450, which carry out the initial reactions (phase 1) of metabolism. It has much less of the phase 2 metabolism systems, which conjugate the metabolites with endogenous molecules to make them more polar and thus easier to eliminate. This is unlikely to be a signiﬁcant problem in most cases, as these conjugates are unlikely to be mutagenic in their own right. However, it means that the test system may be exposed for an unrealistic time to active metabolites that might otherwise be removed by conjugation. Test Battery and Study Design In assessing the genotoxicity of a new chemical, it is normal to use several tests that examine different endpoints or mechanisms of effect, in recognition of the limited scope of individual tests. The types of test used are typically a bacterial mutation test, usually the Ames test, an evaluation of chromosome damage in mammalian cells, an in vivo test for chromosomal damage, such as the micronucleus test in

164

A Guide to Practical Toxicology 2nd Edition

Table 2 Direct-Acting Positive Controls Used in the Ames test Species/strain Salmonella typhimurium TA1535, TA100 TA97Aa TA98 TA1537 TA1538, TA98 TA102 Escherichia coli WP2, WP2 uvrA

Direct acting mutagens (no S9 mix) Sodium azide 9-Aminoacridine 2-Nitroﬂuorene 9-Aminoacridine 2-Nitroﬂuorene Cumene hydroperoxide, Mitomycin-C 4-Nitroquinoline-N-oxide

Source: Adapted from Ref. 1.

rodents and possibly a test for gene mutation in mammalian cells. The general composition of the chosen test battery is largely determined by the type of chemical and the regulatory authorities at which it is aimed. The nature of the chemical may also inﬂuence the choice of tests, for instance, excessively bacteriotoxic materials, such as antibiotics, are not suitable for bacterial assays although some guidelines may still require them. For an antibiotic, two tests using mammalian cells, one for gene mutation (e.g., mouse lymphoma L5178Y TK assay) and one for chromosomal damage (e.g., CHO assay) with a micronucleus test in vivo, might be recommended as a basic test battery. For a compound known to disrupt cell division, test design is critical and harvest times and exposure concentrations must be carefully chosen; however, mammalian cell mutagenicity would still be possible. In every case, the choice of tests should be made on a rational and scientiﬁc basis, bearing in mind the regulatory guidelines for the class of chemical. In the event of a single positive result that is of borderline biological signiﬁcance, the test battery may be expanded to include studies of DNA interaction, damage, or repair such as UDS or the Comet assay. However, when responding to a positive result with additional testing, it should be noted that increased number of ill-chosen tests may not clarify the picture and may simply serve to produce interpretative uncertainty. The design of genotoxicity studies follows the broad pattern of other toxicity tests, using a control and several increasing concentrations of test material. In a typical Ames test, there could be a control and ﬁve concentrations of test material up to a maximum of 5 mg/plate. There should be at least three plates for controls and at each test concentration. Positive controls, using known mutagens, should be run at the same time to ensure that the bacteria are responding as expected. The positive controls are chosen according to the strain of bacteria and whether they need metabolic activation through S9 mix or are directly mutagenic (Table 2) (1). Benzo(a)pyrene or 2-aminoanthracene are used with S9 mix to

Determination: Genotoxicity and Carcinogenicity

165

demonstrate sensitivity to metabolically activated mutagens but are not the only choices available. As with other branches of toxicology, the choice of exposure concentration or dose level is of crucial importance. This is normally achieved using dose range ﬁnding studies to assess toxicity. In the Ames test, toxicity is assessed by adding a small amount of histidine to the agar medium, allowing a small amount of growth, which is seen as “background lawn.” At toxic concentrations of test substance, this background lawn is thinner than in the controls. This leaves a reduced number of bacteria available for mutation and, as a result, fewer mutant colonies are formed, which may give a false impression of nonmutagenic effect. In experiments with cultured mammalian cells, a degree of toxicity is considered desirable, as this demonstrates exposure of the cells. However, cytotoxicity itself can give rise to false-positive ﬁndings of genotoxicity, either due to the apparent chromosomal damage visible when there is a high proportion of dead or dying cells, or due to chance clonal selection of mutant cells, when high levels of toxicity are used in a mammalian gene mutation assay. Positive results at toxic concentrations should be interpreted with caution. The maximum level of desirable toxicity at the highest concentration is around 50% in the chromosome aberration assay and around 80% in the mouse lymphoma L5178Y TK assay. It should also be noted that genotoxicity has not only been shown at concentrations where the test material is insoluble, but that dose responses have been observed past the concentration at which precipitation occurs. Accordingly, insolubility is not necessarily a valid criterion for choice of the highest concentration. If other criteria, such as the pH of the medium or osmolarity, do not limit the concentration of test substance the usual maximum concentration is set at 5 mg/plate, 5 mg/mL, or 10 mM. For genotoxicity tests in animals, doses are chosen according to the known acute toxicity of the test substance. The route of administration is chosen according to the expected route of exposure in humans but is normally oral or by intravenous or intraperitoneal injection. For in vivo tests, such as the micronucleus test in rodents, it is necessary to prove exposure of the target cells (normally bone marrow) to the test substance by analysis of plasma samples. Additional animals may be necessary for this. Although it may be reasonable to assume that intravenous injection is associated with target cell exposure, where compounds are precipitated or rapidly transformed in the plasma, this assumption may be misplaced. Exposure is less certain with intraperitoneal injection and even less so with oral dosing. However, it is generally assumed that the plasma concentrations of the test substance give a good indication of the concentrations to which the target cells in the bone marrow or liver are exposed, as these tissues have a good blood supply. The duration of exposure is also a factor to consider in study design, although to a very large extent this is indicated in the guidelines and literature. Due to its toxicity, exposure of mammalian cells with S9 mix is generally shorter than without it; in a human lymphocyte study this can mean 3 hours instead of 24 hours. In whole animal experiments, the number of doses is a factor to consider; generally single administration of a high dose is used, although several doses may be used

166

A Guide to Practical Toxicology 2nd Edition

in some cases. The cells of interest may be sampled or harvested at different times after administration to take account of different times of onset of effect. Taking the micronucleus test as an example, it is normal to harvest bone marrow cells on at least two occasions, for example, 24 and 48 hours after dosing; an additional harvest at 72 hours is recommended in some guidelines. An older design involved giving two doses, 24 hours apart, and sampling on one occasion only. Test Systems and Tests There is an extensive history of genotoxicity test systems, including the use of mice in the mouse coat colour spot test, to assess mutation due to radiation, and the dominant lethal assay also in mice, both of which were developed in the late 1950s and 1960s. The use of the fruit ﬂy, Drosophila melanogaster, has a longer history in mutation research but has fallen out of favor. These tests depended on anesthetizing the ﬂies at intervals to check effects. The potential disadvantages of imperfect anesthesia and the escape of the ﬂies into the open laboratory or their death, together with the technical demands of difference recognition, may have had some inﬂuence on the decline in their use. The stress associated with chasing an expensive experiment around a laboratory with a butterﬂy net could not be expected to increase its popularity with toxicologists. Progress in the acceptance of new tests for genotoxicity is slowed by the multitude of test systems under development and by the consequent dilution of effort for really promising lines of research. The spectrum of validation for new tests or test systems is a constant problem, collaborative studies usually being conducted by a number of laboratories. These multicenter studies are expensive and cumbersome to organize, and may show up a lack of reproducibility in the more technically demanding assays. Following validation, there is the task of gaining regulatory acceptance and persuading companies developing new chemicals to use them. Sometimes assays have gained credibility in industry through their use as screening assays before gaining acceptance from regulators. Many genotoxicity assays are conducted in vitro using unicellular organisms that have been produced with particular characteristics for the purposes of the test endpoint and which may be subjected to insidious genetic drift. As a result, test system characterization is an important factor in the conduct of these tests, in a way that is not seen in vivo. Whole animals have a much longer lifespan than microbial or cellular systems and therefore change more slowly, over a period of years rather than months. The rate of change in any animal species or strain is usually not large enough to cause problems and a single change is unlikely to invalidate an experiment. With single cell preparations, either bacterial or mammalian-derived, the generation times are quicker and there is the possibility that the cells may lose the characteristics that are vital for correct performance of the test. For instance, the strains of Salmonella used in the Ames test have been modiﬁed in various ways to make them more sensitive to carcinogens. Modiﬁcation has been performed to enhance absorption, via a rough coat, or to increase sensitivity to UV light

Determination: Genotoxicity and Carcinogenicity

167

Table 3 Principal Genotoxicity Test Systems Mutation event

Test systems

Tests

Bacterial reverse mutation

S. typhimurium

Ames test for reversion to histidine independence Ames test for reversion to tryptophan independence Mutation at HGPRTa locus Mutation at TKb locus

E. coli Mammalian mutation In vitro DNA damage in vitro

DNA damage in vivo or ex vivo

CHO or V79 Chinese Hamster cells, Mouse lymphoma L5178Y cells CHO or V79 cells, Human peripheral lymphocytes Primary cultures of rodent hepatocytes Rat and mouse

Chromosome aberration Chromosome aberration Unscheduled DNA synthesis, or Comet assay Micronucleus test or UDS or COMET assay

a Hypoxanthine

guanine phosphoribosyl transferase. kinase. Source: Adapted form Ref. 1.

b Thymidine

or antibiotics. These characteristics are essential for the correct function of the tests and, because they are not immediately visible or veriﬁable by conventional biochemical testing, they must be checked in the stock cultures at regular intervals. The primary requirement for the Ames test is that the Salmonella or E. coli strains used should not grow in the absence of histidine or tryptophan, respectively. The presence of rough coat can be ascertained through absorption of a highmolecular weight dye and the consequent lethality. Sensitivity to UV light is checked by irradiation; in addition, the antibiotic resistance of some strains has been increased and is tested with the appropriate antibiotic. Finally, the relative sensitivity to known mutagens is checked in every study against expectation from laboratory background data ranges. Failure to complete these checks may produce unreliable results. This requirement may be less stringent for primary cultures of cells, such as hepatocytes, which are derived from animals of known strain and biochemical proﬁle, which can themselves be characterized by conventional means. Test systems for the evaluation of genotoxicity may be divided broadly into the categories in Table 3 (1), which also lists the main tests in which they are used. Due to the multiplicity of test systems, only the major ones used in regulatory toxicology are discussed here, with references to tests or systems that may not be considered to be mainstream. Bacteria Bacterial mutation assays were among the ﬁrst in vitro toxicity tests to gain regulatory acceptance. The reversion assay (the Ames test), using strains of

A Guide to Practical Toxicology 2nd Edition

168

S. typhimurium has become the most widely conducted genotoxicity assay, with the addition of E. coli in deference to Japanese wishes. The test is based on mutant Salmonella strains that cannot grow without histidine, but which can be reverted to wild type by mutation, when they are able to synthesize their own histidine. After a period of incubation with the test material, with or without S9 mix, the colonies of revertant bacteria are counted. Each strain of bacteria used has a normal background incidence of mutation, and a dose-dependent increase from this is taken to be evidence of mutagenic effect. This effect should be reproducible in a second experiment, which is usually performed to a different protocol. Normally four strains are used, selected from TA 100 and TA 1535, which detect base substitution, TA 98 and TA 1538, which detect frameshift mutations, and TA 97 and TA 1537, which detect single frameshift mutations. TA 102 may also be used but is not generally required by regulatory guidelines. The same principles are applicable to E. coli, which is used to comply with Japanese guidelines and detects base substitutions; usually a single strain such as WP2 uvrA is used. These strains are dependent on tryptophan and mutations are revealed by the presence of colonies growing in the absence of tryptophan. Salmonella and E. coli may also be used in forward mutation tests and in DNA repair tests, in which repair-deﬁcient bacteria are mutated to repaircompetent, which are able to form colonies that can be counted. Mammalian Cells in Culture Mammalian cells may be used in mutation assays and in chromosome damage or aberration tests, also known as cytogenetic assays. The most commonly used mammalian cells are the Chinese hamster-derived cells–CHO (Chinese hamster ovary) and V79 lung-derived cell lines, the mouse lymphoma L5178Y cell, and primary cultures of rodent hepatocytes or human peripheral lymphocytes. The cell line cultures have advantages in that they are easy to culture consistently, but, in contrast to primary cultures of cells from tissues such as liver, they have little metabolic activity and tend to have abnormalities of chromosomal number (aneuploidy). The Chinese hamster cell lines tend to grow in sheets, which can make intercellular communication easier in some circumstances, leading to transfer of cellular components that may negate any mutation in the receiving cell. Therefore, the plating density of the cells needs to be controlled. These lines have particular use in chromosome aberration assays but may also be used for detection of mutations, for example, at the HPRT locus. The mouse lymphoma L5178Y cell, which uses the TK locus, is more sensitive to mutagens than the Chinese hamster-derived cells; they can grow in suspension culture and thus do not have the problem of intercellular communication. In addition, it has been suggested that this cell line can be used in the detection of chromosomal abnormalities and mutations through differences in colony size, although the reproducibility of this has been questioned. This, using an appropriate protocol, potentially gives the cells a much broader scope than the Chinese hamster-derived lines for which mutation and chromosome damage are assessed in separate tests. If the TK assay

Determination: Genotoxicity and Carcinogenicity

169

is used, the size of colonies produced may indicate whether the damage is due to clastogenicity or mutation. There is the possibility that these cell lines may undergo some genetic drift in different laboratories, a factor that may ultimately lead to some inconsistency and irreproducibility of results. Human peripheral lymphocytes are also used and have the advantage that they are from a relevant species and are also primary culture cells. They are used only for the assessment of chromosome aberration; these tests tend to be more expensive than those using cultured cell lines. It is important to ensure that the donors of the blood from which the lymphocytes are separated are free of viral infection, nonsmokers, not too old, and not on medication that may be expected to affect the assay results. As stated earlier, it is important to demonstrate cytotoxicity in these assays and positive controls are routinely used to demonstrate that the test system is valid. Once again, it is important to conduct a second experiment to conﬁrm the results of the ﬁrst. The basic principle in mammalian cell mutation assays is to induce mutations that confer resistance to toxic nucleotide analogs. As with the Ames test, two independent experiments are conducted, preferably to slightly different protocols. Metabolic activity in these tests is provided by S9 mix. The cells are exposed for up to 24 hours without S9 or up to 6 hours with S9 mix, and are then cultured without the test substance to allow for phenotypic expression of mutation. Then they are cultured with the appropriate selective agent to check for the formation of colonies. In chromosome aberration tests, the cells, which may be human peripheral lymphocytes, are exposed to the test substance for up to 24 hours and may have a treatment-free period. They are then treated with a spindle poison, which arrests the cell division in metaphase. Metabolic activation is again provided by S9 mix. The cells are taken onto microscope slides and stained. An appropriate number of metaphases, which may be 100 cells from two or three culture replicates at each of three treatment concentrations, are scored for the presence of chromosomal aberrations, which are seen as gaps, breaks or exchanges, and abnormalities of number. Although numerical abnormalities due to polyploidy and endo-reduplication may be seen with other cell lines, aneuploidy is easier to detect in human cells. A chromosomal gap is an area in which the stain has not been taken up and where there is minimal misalignment of chromatid(s). A chromosomal break is deﬁned as an unstained section accompanied by a clear misalignment of the chromatid(s). General opinion is that gaps are not as signiﬁcant as breaks but they are reported anyway, usually as separate totals to the other aberrations. More extreme disruption may be seen and this is also reported. Cytotoxicity is determined by reductions in mitotic index for human lymphocytes. For cell lines a variety of methods to assess cytotoxicity are available, including viable cell number, colony-forming ability, and MTT assessment of mitochondrial activity. Hepatocytes isolated from rats may be used in a range of assays, such as UDS, which assesses repair that takes place following damage to DNA. The extent of DNA repair is assessed through the incorporation of tritiated thymidine into

A Guide to Practical Toxicology 2nd Edition

170

the nuclei of cells exposed to the test substance. The isolated hepatocytes are allowed to attach to glass microscope slide coverslips, where they are exposed to the test substance; they are then exposed to medium containing tritiated thymidine and, after ﬁxing and drying, to photographic emulsion. The cells are stained and the number of grains in the nucleus are assessed microscopically. There is also a method of measurement that uses liquid scintillation counting of the activity; however, this does not allow the exclusion of cytoplasmic grains from the total counted and so is less sensitive but also less time consuming. UDS may also be examined in an ex vivo form of the test. Cultured cells can also be used to assess sister chromatid exchange (SCE), in which sections are exchanged between the chromatids of a chromosome pair; however, the in vitro SCE test suffers from a high background incidence, which limits its sensitivity. SCE correlates well with genotoxicity and carcinogenicity, but is not fully understood. It can be assessed from cells obtained from cancer patients or workers exposed occupationally to chemicals, where it may indicate increased effects on the DNA. Ex Vivo Systems In these systems an animal is treated and, after an appropriate interval, tissues such as the liver are removed for further treatment in vitro followed by examination. This approach is used in a reﬁnement of the UDS assay and in the Comet assay. The advantage of this approach is that the chemical is administered to a whole animal and is subject to the normal processes of metabolism and elimination before its effects are examined in the target tissues. In the ex vivo UDS assay, the livers are removed from the animals at a suitable time after dosing and sections or slices are treated with tritiated thymidine. The slices are ﬁxed and then treated in a similar way to the cells in the in vitro method described above. The comet, or single cell gel electrophoresis assay, is potentially a powerful means of detecting DNA damage in cells from animals that have been treated with suspected carcinogens. The basic principle is to electrophorese the DNA from a single cell nucleus, damaged DNA having a greater spread of travel (tail) than control, or undamaged DNA, the shape of the electrophoresis pattern giving the assay its name. The assay is simple and can be performed rapidly but may not characterize the type of damage that has occurred. Unlike many genotoxicity tests, it can be applied to any tissue believed to be a target for the test substance. The assay can be carried out after a single administration or could be included in routine toxicity studies as an indicator of DNA change and, by implication, of potential carcinogenicity. However, it should be seen as one element of a set of data collected to examine genotoxicity or carcinogenic potential and not be taken, by itself, to be a clear indication of hazard. It is likely that regulatory acceptance of this test will increase. In Vivo Systems Mice and rats are used for examining the potential of chemicals to cause chromosomal damage by examination of bone marrow cells either by scoring of metaphases

Determination: Genotoxicity and Carcinogenicity

171

or, more usually, micronuclei in erythrocytes. Standard strains can be used in these routine tests, which are performed by administration of a dose near the limit of tolerance. Bone marrow is harvested from the femur 24 and 48 hours after a single administration and, in some designs, also at 72 hours. Another design has two administrations 24 hours apart and one harvest 24 hours after the second administration. Chromosomal damage is assessed in bone marrow smears by the presence of micronuclei, which are fragments of damaged chromosomes or whole chromosomes left behind when the nucleus is extruded following the ﬁnal cell division in normal erythrocyte maturation. Up to 2000 polychromatic erythrocytes from each animal are assessed for micronuclei. The test can assess chromosome damage and spindle defects. Toxicity may be indicated by the ratio of polychromatic (early stage) erythrocytes to normochromatic (late stage) erythrocytes (PCE:NCE). A decrease in the ratio may be due to either prevention of early stage development or replacement of dead bone marrow from peripheral blood. Therefore, a decrease in the PCE:NCE ratio indicates bone marrow toxicity and thus, exposure. Opinions and guidelines tend to differ in the choice of an all-male design or one that uses both sexes, and on the number of erythrocytes that should be scored. In the event of a negative result, it is important to demonstrate exposure to the test substance, especially if the route of administration is oral or intraperitoneal. Consequently, it may be better to build these examinations into the original experiment with the same batch of animals, rather than do a separate experiment at a later date, which might not be equivalent in every respect to the original test. However, this uses more animals and does not comply with the three Rs. In addition, mice have been used in sister chromatid exchange assays, the mouse spot test and the dominant lethal test, all of which detect mutations. However, these tests are more extensive in terms of animal numbers and take longer to complete than other assays and are not routinely used. In the former test, pregnant females are treated on day 10 of gestation and the offspring are checked for the presence of relevant spots of colour difference in the coat, which imply the presence of mutation in the coat colour genes of pigment cells. In the dominant lethal test, the effect of a prospective mutagen on the germ cells is assessed by single or sometimes limited repeated administration to males which are then mated with a fresh, untreated female each week for a complete spermatogenic cycle. After two weeks gestation, the uterine contents are inspected for implantations and implantation losses and fertility index. The presence of increased implantation loss implies that a mutation has occurred, and the week in which the effect is noted indicates the stage of the spermatogenic cycle that is involved. Transgenic mice are also used occasionally in mutation assays, and it is likely that this will increase as validation of the various models proceeds and regulatory acceptance increases. Such systems have the advantage that they are in vivo and the chemical is subject to the dynamics of tissue interrelationships, metabolism, and elimination, in contrast to the tests conducted in vitro. They have the disadvantage that the animals are expensive and may need specialist care.

172

A Guide to Practical Toxicology 2nd Edition

Pitfalls in Genotoxicity The absence of toxicity is a major concern in genotoxicity assays, as it is often taken to mean that the test system was not adequately exposed to the test substance. This may be due to inherent insolubility of the test substance, making high concentration exposure difﬁcult or impossible. However, as genotoxicity has been shown in the insolubility ranges of some substances, restricting test concentrations on the basis of solubility is not usually an option. Equally, it should be pointed out that there should also be a lack of toxicity at lower concentrations as toxicity itself may produce positive results in some test systems. In the Ames test, toxicity may lead to reduced colony counts, not through lack of genotoxicity but through a reduction in the number of viable bacteria able to demonstrate a response. With substances that are particularly bacteriotoxic, low achievable concentration may make the Ames test inappropriate. An absence of response in positive controls may indicate that the test system was not what it was supposed to be, and the characterization of the cell or bacterial line should be checked, together with the laboratory background data accumulated from previous experiments. Poor characterization of the test system is a factor to bear in mind in looking at any set of unusual test data. In chromosome aberration tests in mammalian cells in vitro, damage seen only at high concentrations may indicate that the harvest times were inappropriate; different harvest times in the second experiment may help to clarify effects seen. In a similar way, the use of a preincubation assay in the bacterial reverse mutation (Ames) test can provide alternative metabolic conditions in the second experiment. The use of different conditions in the second experiment following a negative or equivocal ﬁrst experiment provides a more robust study with less chance of a falsenegative result. Osmotic pressure or pH outside normal limits is also a source of invalid data and should be considered in the design of studies. In some cases, biologically irrelevant effects can be produced by choice of an inappropriate test system. In tests in vivo, there is a problem if the test material has marked pharmacological effects at low doses that preclude high-dose testing. In these cases, it may be impossible to produce a high enough exposure at the target cells. A similar lack of exposure may be seen in substances that are absorbed to a negligible extent. In these cases, a parenteral route may help to increase target cell exposure; however, intraperitoneal injection may not be appropriate and intravenous injection may be difﬁcult due to low solubility. This becomes problematic when an in vitro test has indicated a positive result that cannot be veriﬁed in vivo due to toxicity, poor absorption, or poor solubility. One approach is to consider the use of additional tests such as UDS, but the best administration route for this test is oral, as this is the route most likely to be associated with the highest possible concentrations in the liver, where the target cells are present. In the ﬁnal analysis, a negative result in vivo achieved as a result of low-level exposure does not offset a positive result in vitro.

Determination: Genotoxicity and Carcinogenicity

173

The possibility of false-positives should be considered. This is the chief reason for conducting a second experiment for in vitro assays, the object being to conﬁrm the reproducibility of the ﬁrst set of data, a factor that is particularly important where a marginal effect is examined. In the mouse micronucleus test, excessive stress may lead to a small increase in micronuclei. One area of fundamental importance is the purity of the test substance, as impurities have been associated with genotoxicity. A positive result with an impure early production batch of chemical may not be relevant to the effects of future batches. Equally, it should be borne in mind that a change in synthetic pathway during development may introduce new impurities that have not been properly tested in previous genotoxicity assays. Care should be taken, in responding to a positive result, that additional tests are chosen that will help to explain the data produced rather than simply add to them. In data sets relating to older chemicals, it is possible to see the large number of tests that have been conducted to investigate positive results in early testing; these effects have been known to disappear when there has been a change in production methods. The initial response to a positive result should be to ask if it is biologically relevant and how it has arisen. With this information, it is then possible to design a set of investigations that will explain the initial data set. Genotoxicity Testing In Vitro—Sensitivity and Speciﬁcity There is a huge pressure to adopt in vitro test methods in many areas of toxicology, including some that are simply not suited (currently) to such an approach, such as chronic toxicity. Although in vitro tests may exist and be used, this does not necessarily mean that they are effective in identifying hazards that are truly relevant to man. It has become obvious over the years since the Ames test was ﬁrst used, that a positive result did not mean infallibly that the tested chemical was a human carcinogen or even a rodent carcinogen. Equally, a negative result did not exclude carcinogenicity by nongenotoxic mechanisms. It has become normal to use a battery of standard tests to assess genotoxicity, typically two in vitro and one in vivo. However, the in vivo test, usually the rodent micronucleus test, is often described as being too insensitive. This is despite the fact that it uses a complete animal test system that should be more relevant biologically than specially adapted bacteria or isolated cells derived from long dead mice. The intention in using a battery of tests is to catch some of the false-negatives or falsepositives and to investigate different mechanisms of genotoxicity, so that an overall interpretation of the data can be reached without reliance on a single ﬂawed test. The unspoken belief is that if a single test is ﬂawed, then it is an improvement to use several ﬂawed tests in harness but, crucially, to understand their ﬂaws and how to interpret them. The second level of understanding is to know what tests would be useful to further investigate the false-positive results that are often found. One of the main issues surrounding the currently standard tests for genotoxicity is their sensitivity and speciﬁcity in the detection of carcinogens or

174

A Guide to Practical Toxicology 2nd Edition

noncarcinogens. The sensitivity of a test or test battery is a measure of its ability to produce a positive response with a known carcinogen; speciﬁcity is a measure of the ability to give a negative result with a known carcinogen. In other words, these are measures to assess the incidence of false-positives and false-negatives. An additional limitation in the extensive discussion that has taken place on this issue is the general tendency to speak about rodent carcinogens rather than those that cause cancer in humans. The implication of this is that, if the genotoxicity test or battery has poor sensitivity with respect to rodent carcinogens, the sensitivity of such tests in identifying human carcinogens is much less. This is based on the basic fact that most rodent carcinogens are not human carcinogens. In addition, genotoxicity tests, by deﬁnition, detect genotoxic carcinogens and not those that act via nongenotoxic mechanisms. Kirkland et al. (2,3) reviewed the ability of a battery of three in vitro genotoxicity tests to discriminate rodent carcinogens and noncarcinogens. The tests examined in detail were the Ames test, the mouse lymphoma assay, and a test for clastogenicity—the in vitro micronucleus test. These reviews clearly identiﬁed the strengths and weaknesses of the current approach to in vitro identiﬁcation of genotoxic chemicals. Of the 554 carcinogens evaluated, 93% had corresponding positive results in at least one of the three tests, i.e., they had good sensitivity but they were not good for identifying noncarcinogens (poor speciﬁcity). This poor speciﬁcity was illustrated by the ﬁnding that more than 80% of the 183 compounds that were noncarcinogenic in male and female rats and mice, had positive data in in vitro genotoxicity tests. Of the three tests, the Ames test showed 54% sensitivity (correct positive responses) but showed the best concordance with the rodent studies in terms of its ability to give positive results for carcinogens and negative results for noncarcinogens. Adding the two other tests to the battery produced a decrease in sensitivity because this increased the numbers of positive responses from both carcinogens and noncarcinogens. The mammalian cell test had poor speciﬁcity, producing too many false-positives. The ﬁrst of these reviews clearly showed the interpretative hazards posed by genotoxicity test results. Although the Ames test came out relatively well, the following points illustrate the problems: r Of 206 carcinogens tested in these assays, only 19 gave consistently negative results in the full battery of three tests. Most of these were carcinogenic through a nongenotoxic mechanism or were very weak genotoxins. r Genotoxicity data were found for 177 of 183 noncarcinogens in rodents, which showed that the Ames test was reasonably speciﬁc (73.9%), but the mammalian cells tests has speciﬁcity below 45% (i.e., a high incidence of false-positives). r Where all three tests had been performed, false-positive results were found for between 75% and 95% of noncarcinogens. The authors indicated that if a chemical gave positive results in all three tests, it was three times more likely to be a carcinogen in rodents than not. Equally, a

Determination: Genotoxicity and Carcinogenicity

175

negative result in all three tests was associated with a twofold likelihood that the chemical would be a noncarcinogen. The three tests reviewed by Kirkland et al. are not the only in vitro options. Sasaki et al. (4) reviewed the utility of the comet assay by comparing the results with eight mouse tissues with the carcinogenicity data from 208 chemicals chosen from IARC monographs. Chemicals such as alkylating agents, azo compounds, and hydrazines were highly positive in this assay, reﬂecting the comet test’s ability to show fragmentation of DNA molecules. However, the tissues that showed increased DNA damage were not necessarily those in which tumours developed. On the other hand, tissues which did express tumours usually showed DNA damage, indicating that organ speciﬁc genotoxicity was a prerequisite, but not necessarily predictive for carcinogenicity. This review indicated that the comet assay had a high-positive response for genotoxic rodent carcinogens (110 of 117 were positive) and a high-negative response for rodent genotoxic noncarcinogens, which suggests that the comet assay may be useful to examine in vivo the results of in vitro genotoxicity tests. This is supported by the observation that 49 of 54 rodent carcinogens that were negative in the in vivo mouse micronucleus test were positive in the comet assay. It was acknowledged, in the report of an ECVAM workshop (5) that in vitro genotoxicity tests, in mammalian cells, produce a high number of false-positive results. The concern is that these require considerable resource to investigate properly and result in increased use of animals. A number of problems with these tests were suggested. The tests rely on externally added S9 mix that is nearly always from induced rodent liver and is unlikely to produce metabolites that are relevant to humans. In addition the cells used have impaired function of p53 and their DNA repair capability is not normal with respect to normal cells. The high concentrations used routinely, up to 5000 ␮g/mL, are predicated on the possible absence of relevant metabolizing enzymes. The hope (although this word was not actually used) is that use of high concentrations may elicit production of relevant metabolites through the activity of less prominent enzyme pathways. It has to be said that hope is a poor basis for scientiﬁc progress and while pathways of further testing were suggested in the workshop report, the ﬁeld is still in a state of ﬂux. In a further workshop report, Thybaud et al. (6) sought to make recommendations for interpretation of common regulatory genotoxicity test batteries and to suggest strategies for follow-up tests. The high number of false-positives was again noted. Although the results of the test battery may be negative, further testing may be considered necessary if carcinogenicity was seen in animal tests, if structural considerations indicated potential genotoxicity, or if signiﬁcant human metabolites had not been tested. Any follow-up tests should be carefully selected based on mechanistic understanding or to elucidate mechanisms of action. Genotoxicity may arise through actions not related to direct reaction with DNA, and these may not be linear or have a threshold. Overall, the concentration at which the effects are seen is an important consideration as high concentrations are unlikely to be relevant to humans.

176

A Guide to Practical Toxicology 2nd Edition

The various evaluations discussed above are, principally, to detect rodent carcinogens, and it is well known that these are often not relevant to human exposure, mechanism, or epidemiological experience. As with most biological systems, the black and white of the extremes merely point to the hazards of the grey areas in between; in this case, the two extremes are not entirely black and white themselves. It is clear that interpretation of genotoxicity data needs a great deal of care. It is also abundantly clear that there is a need for a genotoxicity testing strategy that uses tests that are relevant to man and not to rodents.

CARCINOGENICITY General Principles In Carcinogenicity Cancer is a degenerative condition of old age, which is seen at high incidence in animals and, in approximately, 30% of the human population. Furthermore, it is a tremendously diverse condition, affecting practically every tissue in the body and, in terms of individual tumours, occurring at widely differing rates; for example, in humans, lung and breast cancer are common but hemangiosarcoma is rare. As life expectancy increases, the background incidence of cancer will also tend to increase. The principle in carcinogenicity assessment is to screen chemicals for the potential they might have to cause, or be associated with an increased incidence of cancer in humans. This process, which is broader than any single study, looks for structural similarities between the chemical and known carcinogens, and examines all the data from genotoxicity tests, metabolism and pharmacokinetics, and the data from long-term testing in animals, usually rats and mice. The intention in these latter tests is to look for relevant tumour increases in animals or to look for mechanisms that may be expected to result in human tumours at a signiﬁcant rate. These assessment methods are obligatory before a chemical is allowed to come into regular contact with humans through marketing. For existing compounds, natural or synthetic, there is the possibility of epidemiological study to elucidate relationships between observed tumours and human exposure. Most known human carcinogens are genotoxic, and it is reasonable to assume that a chemical that is found to be clearly genotoxic in appropriate tests, including those conducted in vivo, is likely to be carcinogenic in humans. The problem with testing for carcinogenicity in rodents is that this tends to show whether the test material is or is not carcinogenic in rodents, and a careful extrapolation to the human situation is necessary before the risk of human carcinogenicity can be properly assessed. This extrapolation requires the careful assessment of all the available data and, possibly, the performance of additional mechanistic studies to explain any effects seen in animals or in vitro tests. The absence of carcinogenic effect in rodent tests should not be taken as deﬁnitive proof that a chemical will not be carcinogenic in humans. Equally, the presence of an effect in rodents, for a nongenotoxic chemical, is often taken as evidence that there will not be a

Determination: Genotoxicity and Carcinogenicity

177

similar effect in humans. The contradictory nature of these two positions calls into question, the utility of the carcinogenicity bioassay and there is, in fact, a growing acknowledgement that this is an unsatisfactory form of test, which will in time be replaced when satisfactory alternatives have evolved. Carcinogenicity may be simply deﬁned as the process of conversion of normal cells, so that they can form tumours. However, this simple deﬁnition masks the complexity of the process, which is multistage and multifactorial. At its most basic level, genotoxic carcinogenesis has been described as a three-stage process— initiation, promotion, and progression. Initiation is where the initial change in DNA takes place and is ﬁxed; promotion is the initial division of these cells to form a focus of less differentiated cells, and progression is where the focus of cells grows to become a tumour. Each of these stages is itself subject to a wide range of inﬂuences, which makes testing for the individual stages extremely difﬁcult, if not actually impossible. The picture is made more complex when the intricate mechanisms of nongenotoxic carcinogenesis are considered. Where genotoxic carcinogenesis is the end result of direct effects on the genetic material—DNA and/or chromosomes—in terms of quality or quantity, nongenotoxic carcinogens act by producing changes in the expression of the genetic information. For instance, changes in the basic mechanisms of cellular control of programmed cell death (apoptosis) and division or simply increasing cell turnover can lead to cancer, without an initial direct effect on DNA. The extent of DNA methylation is also now known to be an important factor in gene expression and cellular control as is the necessity for unhindered communication between cells via gap junctions. A further distinction between genotoxic and nongenotoxic effect is that the former, once ﬁxed by cell division, is irreversible, whereas the latter can be reversed by withdrawal of the stimulus. The fact that there has been damage to the DNA does not mean that cancer will develop; if the cells do not divide or are removed through natural processes of cell death or sloughing, cancer will not occur. Furthermore, carcinogens in humans can rarely said to be acting alone. Human DNA is subject to a high background of “normal” damage due to environmental inﬂuences, independent of any speciﬁc xenobiotic chemical. When an additional potent carcinogen is added to this, the effects may be more than simply additive; chemicals to which we are exposed routinely in the course of everyday existence may serve to promote the effects of chemicals encountered at work or elsewhere. The carcinogenicity of mixtures, such as cigarette smoke, is bound up in the world of these interactions. In fact, smoking has a marked upward effect on the risk of cancer in workers who were employed in the asbestos industry or uranium mines. Conversely, a reduced incidence of cancer is associated with high levels of antioxidant or other protective chemicals, typically contained in a diet rich in fruit and vegetables. In regulatory toxicology, the lifespan study in rodents has been the gold standard of assessment for many years, although this is changing gradually. The objective of these studies is to detect increased incidences of tumours in the treated groups that can be ascribed to the test substance. Although tumours may be caused by chronic inﬂammation or physical mechanisms such as implants, radiation,

178

A Guide to Practical Toxicology 2nd Edition

or ﬁbers, the main emphasis here is on assessment of chemical carcinogenesis. However, the whole area of carcinogenicity assessment is under review as the relevance and utility of data provided by classic two-year study are increasingly questioned. This section sets out to provide a review of current methods and those that may supersede them. Test Systems for Carcinogenicity The normal species in which lifespan carcinogenicity is assessed are the rat, mouse and, rarely, the hamster. The hamster is used very little in these experiments, particularly because of the lack of background data; also, where temperature control was less than perfect, the prospect of an entire study going into hibernation in cold weather was less than ideal. Other species may be more appropriate than these but are usually ruled out by long lifespan and consequently increased study length, housing requirements, or expense. The usual approach has been to conduct bioassays over a 24- or 30-month period in rats and mice. The mouse has a long history in carcinogenicity testing; it was skin-painting experiments in mice that demonstrated the tumour promotion properties of phorbol esters, and they have also been used in photocarcinogenicity testing. However, the use of the mouse is increasingly questioned. Historically, several strains of rodent have been favored but each has its pros and cons. The choice of strain was greatly inﬂuenced by the U.S. National Toxicology Programme (NTP), which tended to use F344 rats and B6C3F1 mice. The former has a high incidence of testicular tumours and leukemias and the B6C3F1 mouse is associated with a high incidence of liver tumours. Other strains have been used successfully, notably the Sprague–Dawley CD and Wistar rats and CD-1 mouse, each with its own tumour proﬁle. Growth, survival, and tumour proﬁle are inextricably entwined and have caused problems in the past. It has been noted, especially in studies where an unpalatable test substance is mixed with the diet, that lower food consumption in the treated groups is associated with lower tumour burden and longer survival, when compared with contemporary controls. The Sprague–Dawley derived CD rat was used extensively, until it was found that it was becoming increasingly overweight with a consequent reduction in lifespan (see chapter 2 for further information) so that fewer than 50% of animals survived until the end of the treatment period. As this is one of the criteria of a successful carcinogenicity bioassay, there was a move towards other strains. One of the advantages of the F344 rat was that it was somewhat smaller than the CD, with better survival, eating less food, and requiring less test material. The chief disadvantage of using a strain with a high incidence of a particular tumour is that it is difﬁcult to show a small increase in tumours in the affected tissue, especially as the normal incidences can vary signiﬁcantly between studies. In the ﬁnal analysis, the choice of strain should be inﬂuenced by strains usually used in the laboratory that is expected to carry out the tests; or choose the laboratory that uses the strain you prefer. This is a pragmatic decision based on the fact that

Determination: Genotoxicity and Carcinogenicity

179

the historical control data at the laboratory are important in the interpretation of the data; an apparently signiﬁcant but small increase in testicular tumours may be dismissed as being within historical ranges. Such dismissal is even more authoritative, if no dose relationship is present. Although there is good sense in using the strain of rat that was used in the general toxicity testing, this is not always possible, and is, in any case, not usually possible with the mouse, which is not often used in general toxicity. It has been suggested (7,8) (see Box 1, chapter 3 also) that several strains should be used in a single study, which could be expected to address differences in response among strains. The problem with this is that the number of animals needed to show a weak carcinogenic response is large for statistical reasons. Hence, in order to detect a weak effect in only one strain, a large number of animals would be necessary in each strain, increasing the size of the study beyond practicable means, although Festing indicates that this would not be necessary. Furthermore, if a chemical is carcinogenic in only one strain of several tested, it becomes necessary to question the relevance of the result to the human situation. Given these considerations, if there was a reason to expect signiﬁcant metabolic differences between strains, it would probably be better to choose a strain speciﬁcally for the carcinogenicity studies, based on closeness of metabolic relevance to humans. By the time it is necessary to perform the carcinogenicity studies, the information necessary for this choice should be largely present. However, such deliberation is rare and more pressing concerns are the more obvious characteristics of the chosen strain, such as survival and tumour proﬁle. Test systems that allow demonstration of a carcinogenic response in a shorter time than the standard two-year bioassay would appear to be attractive. The transgenic option, which can be completed in six months, are accepted by U.S. regulatory authorities but are viewed with scepticism in both the U.S.A. and Europe. In these studies, the importance of various genes in carcinogenesis, for example, the p53 or H-ras gene, is exploited by using strains of mice that are partially or wholly deﬁcient in the gene of interest. These models appear to have some utility in assessing carcinogenic potential but the same drawback as with the lifespan study exists, that the assay may produce responses that are irrelevant to humans. One aspect to be wary of in these assays is the potential for all animals, including those in the control group, to eventually have a particular tumour. This very much reduces the utility of the assay, as it reduces comparators to tumour number or size in treated animals in comparison with the controls or to time of observation of the ﬁrst tumours. Overall, there are probably better ways of assessing carcinogenic potential and these will become more important as the mechanistic bases of nongenotoxic carcinogenicity are elucidated.

Study Design and Methods of Assessment The basic design of the classic rodent bioassay is another toxicological constant, deﬁned by years of practice and regulatory acceptance. The norm is to treat three

180

A Guide to Practical Toxicology 2nd Edition

groups each of a minimum of 50 males and 50 females for at least two years, a treatment period, which may be extended to 30 months if survival indicates that this is necessary. Normally there are two control groups, giving 100 males and 100 females. Historically, one group of controls is used to be acceptable but the double control group is now normal in pharmaceutical development. The route of administration is normally oral by intubation or admixture with the diet (see chapter 3 for more extensive comment); the latter has the advantage of being simple and cost effective. Oral intubation or gavage has the advantage for pharmaceuticals that this is most likely to be the route of administration in patients. However, where oral intubation gives poor systemic exposure, this may be improved by dietary administration where the animals eat over an extended period. For agrochemicals or food additives the most appropriate route is usually in the diet. Poor palatability of diet offered can reduce food consumption and consequently affects tumour proﬁle and survival. There are occasional studies which are carried out by administration in the drinking water; however, it is extremely difﬁcult to estimate spillage, making calculation of exposure very inaccurate. Other routes of administration include dermal or inhalation; the former is relatively simple, the latter highly complex and, due to the amounts of high-cost equipment required, extremely expensive. Although the classic bioassay approach uses both sexes of two species, there have been various attempts to get acceptance of a reduced protocol that uses male rats and female mice. Clearly, this is useful for picking up male rat-speciﬁc carcinogens, for instance, those acting via ␣-2u globulin. However, the ability to pick up such speciﬁc mechanisms does not necessarily make the assay results relevant to humans. One type of carcinogenicity assay that does not ﬁt well with more normal designs is the photocarcinogenicity study, a fairly straightforward concept, which is not at all straightforward in its execution. The object of these studies is to determine the potential of the test substance to cause cancer in the presence of sunlight. Generally, they involve dermal dosing of mice followed by exposure to UV radiation for known durations and known intensities, the latter being difﬁcult to monitor, as the light sources tend to degrade with use and to become less intense. The studies can last between six and twelve months. Problems arise when all the animals, including controls, show skin tumours, which reduces the useful data to time of onset and individual burden of tumours rather than incidence. Also, there has been a lack of consistency in design, strain of rodent, number of animals, and in the UV exposure system used, meaning that comparison between protocols is extremely difﬁcult and that the results are less reproducible. Choice of Dose Levels Correct dose level is critical in these studies, especially for regulatory acceptance. Generally, it is required that the high dose be chosen as a maximum tolerated dose

Determination: Genotoxicity and Carcinogenicity

181

(MTD) that is responsible for toxicity that will not shorten an animal’s survival other than by carcinogenicity. It is important that exposure should be for the lifetime of the animals; reduced survival due to toxicity reduces time of exposure and so lessens the opportunity for tumour formation. However, it should also be recognized that increased survival could be associated with higher tumour burdens due to the natural incidences being higher in old age; tumour proﬁle may also be affected. A 10% reduction in bodyweight gain is considered to be acceptable evidence of toxicity, but care should be taken to ensure that this reduction is not simply due to indirect factors such as poor palatability of diet offered. The lowest dose level is chosen as a suitable multiple of expected human exposure, based on anticipated pharmacokinetics or expected daily intakes either as food additives or as residual pesticides on foods. The use of the MTD has been widely criticized, especially on the basis that the doses thus selected are often unrealistically high. Pharmacokinetics and metabolism at high dose are frequently unrepresentative of those at lower doses; in addition, a general relationship between toxicity and carcinogenicity cannot be drawn for all classes of chemicals. A further consideration is that most human carcinogens, which are mostly genotoxic, are carcinogenic at less than the MTD. Other criteria for dose choice have been suggested, such as pharmacokinetics and systemic exposure (AUC) or metabolism. Parameters Measured Measurement of food consumption and bodyweight gain should always be carried out and are, obviously, critical in dietary studies for calculation of achieved dose levels (see chapter 3 for further information). In studies with administration of constant concentrations, typical in agrochemical studies, the achieved dose will fall, as the study progresses due to the animals’ growth and the fact that food consumption will tend to remain similar throughout the study. In the estimation of dose levels in these studies, it is important to reduce scatter of food as far as possible or to be able to make a reasonably accurate estimate of this, as this has a signiﬁcant impact on the accuracy of the dose calculations. Young animals tend to play more than old animals (and scatter more food) and unpalatable diet will be scattered more as the animals dig into it looking for something better; this is usually more of a problem in the early weeks of a study. Clinical observations, especially for palpable swellings, which give an indication of the time of onset of tumours and their location, are routine. From these data and those collected at necropsy, the tumour burden for each animal can be assessed, as it is possible for treatment to produce a greater number of tumours in individual treated animals than in the controls. Skin tumours would be a good example of this type of effect, as they are easily seen clinically or at necropsy and each would be sampled and examined. In some cases, the onset of a tumour type may be accelerated by treatment, although the overall incidence of tumours may remain very similar to that in the control group. This is particularly important with

182

A Guide to Practical Toxicology 2nd Edition

tumours that are present in the test strain at high incidences, such as mammary tumours in Sprague–Dawley rats. Histological processing of a wide range of tissues and their examination is the primary endpoint of a carcinogenicity study; this would normally include examination of, at least, a blood smear and, more usually, hematological processing of a blood sample just before the end of the treatment period. It is important to ensure that the pathologist has experience of reading these studies and is using terminology that is consistent with that used by other pathologists. In contrast to other types of toxicological data, which may be graded for severity, a tumour is either present or absent and there can be heated debate among pathologists over the diagnosis of a tumour or group of tumours. At such times, reliable, independent peer review of the sections is vital, although this does not always solve the problem. Unlike numerical data, which are wholly objective and can be examined according to whether they were obtained with correct technique, pathologist opinion may be partly subjective and is very much dependent on factors such as skill of histological processing and sectioning and on the experience of the pathologist. Also, unlike a set of numbers, which can be accepted or transformed for analysis, the same set of slides may be examined by several pathologists, each of whom can express subtly different opinions on them. The problem with this is that, while there may be one favorable opinion pointing to an absence of effect, there may be two others—one noncommittal and one indicating carcinogenic effect. It is not possible to ignore the unfavorable opinions and all must be reported. Because animals die at different times during the study—typically, mortality will increase in the last 26 weeks of treatment – the time of exposure of the individual animals to the test substance may differ signiﬁcantly. Also, the animals may die early as a result of toxicity or causes unrelated to treatment, reducing the time of exposure to the test substance, and therefore, potentially reducing the ﬁnal incidences of tumours that might have formed later. Reduced survival, for instance, due to nephrotoxicity, may be associated with a similar or lower incidence of a tumour type than in the controls, which may give a false-negative in respect of carcinogenicity. For this reason, the data resulting from the microscopic examination are processed to give an age-related adjustment to tumour incidences. Other Systems for Carcinogenicity Assessment The process of carcinogenicity assessment is progressive and not solely reliant on the results of the bioassay studies. It has been pointed out above that the causes of cancer are multifactorial and that the results of a rodent bioassay may not be relevant to humans, if they indicate a nongenotoxic mechanism. Equally, testing a conﬁrmed genotoxic chemical in a 2-year bioassay is an irrelevant waste of animals. In view of this, the assessment process to determine carcinogenic potential should itself look at as many different aspects as possible of the test material and its effects. This is reviewed in Box 1.

Determination: Genotoxicity and Carcinogenicity

183

Box 1 Additional Means of Assessing Carcinogenic Potential The following are used in addition to the data from classic lifespan bioassays: r Molecular structure: This can be computer driven (see chapter 12 for further

r r

r

r r

information) and is known as Quantitative Structure Activity Relationship (QSAR) or, without the quantitative aspect, simply as SAR. It is well established that certain molecular groups or structures are associated with carcinogenicity and their presence acts as an early indication of carcinogenic potential. Genotoxicity studies: Genotoxicity studies, as discussed above, also indicate if the substance is likely to interact with DNA and so be associated with increased cancer incidence. Routine toxicity studies: Data from routine toxicity studies should be reviewed. At the simplest level, the presence in the liver of foci of altered uptake of either hematoxylin or eosin, the stains routinely used in histological processing and examination, can indicate the presence of altered cells, which may be the precursors to tumour development. These foci can be investigated by the use of techniques to visualize the presence of various enzymes such as gamma-glutamyl transferase or the placental form of glutathione transferase, both of which may also be indicative of tumorigenic foci. Hormonal levels: Examination of hormonal levels in the plasma may also indicate changes that may lead to increased tumour incidences. This type of effect can also be assessed by microscopic examination of the various endocrine organs such as the pituitary, thyroid or adrenal glands. Immunosuppression: An assessment of immunosuppression, as this has been shown to be associated with carcinogenicity. Other investigations of tissues and data from routine toxicity studies should be considered. The Comet assay may give useful data when conducted at the end of studies to assess DNA damage in target tissues, such as the liver or gastrointestinal tract. Other tests that could be performed include proteomic investigations, to examine the levels of proteins that are expressed due to genetic changes, for instance, in the p53 gene, deﬁciency of which is seen in many human tumours. DNA adduct studies could also be used to indicate effects on the DNA that might suggest a degree of carcinogenic potential. The extent of methylation of DNA is also an important factor in cellular control.

Beyond the extension of investigations in routine toxicity studies, there is a multitude of proposals that are based on accelerated protocols to study tumour incidences. These are generally based on a faster time to tumour and may involve transgenic animals or surgical techniques such as partial hepatectomy. With the latter technique, the theory is that the fast reparative proliferation in the liver

184

A Guide to Practical Toxicology 2nd Edition

would provide an environment that favors the early emergence of tumours. The less expensive option of causing hepatic damage with carbon tetrachloride did not take off in any signiﬁcant way. The use of transgenic animals is examined in Box 2 and Table 4. Box 2 Transgenic Animals in Carcinogenicity Assessment r The use of transgenic animals in carcinogenicity is popular in the United States but less so in Europe, and their use has been examined in a major study coordinated by ILSI (9). These models have been extensively reviewed by Tennant (10–12). Treatment periods are approximately 26 weeks, using groups of 15 males and 15 females, having signiﬁcant effects on the statistical power. It should be noted that there are moves to increase group size and duration of treatment in these studies. r The following is an assessment of the data presented by Cohen et al. (13), using seven models and 21 compounds, summarized in Table 4 (14–19). r Nongenotoxic noncarcinogens were all negative in these models. r All known nongenotoxic rodent carcinogens, dismissed as not relevant to humans by mechanism or human data, were negative. r Peroxisome proliferators did not give consistent results. r Genotoxic carcinogens were positive or gave equivocal results. Phenacetin is a weak mutagen with a possible mechanism of carcinogenicity in humans associated with nongenotoxic effects, leading to cell proliferation, to which weak mutagenicity may contribute. r Hormonal carcinogens gave mixed results. r Peroxisome proliferators gave mixed results but were mostly negative. The question should be asked, if these studies are simply a shorter method of producing tumours that have as much relevance to humans as those produced in a full-length bioassay. Results are clearly dependent on model choice. In conclusion, model choice is critical and there is no guarantee that selection of a model according to class of chemical will be viable as you could, theoretically, choose the model according to the result you want, and do you really want to show that your pet compound is carcinogenic? It is apparent from the data in Table 4, that the performance of these assays was patchy at best, although they seem to have some utility in assessment of genotoxic compounds. The negative results for phenacetin have been ascribed to genotoxicity that was considered only to be weak. The complexities of designing new carcinogenicity assays was put into perspective by a review by Jacobson–Kram et al. from the FDA (20), who pointed out that determination of carcinogenic potential is an exercise that is “complex and imperfect.” The disadvantages of the current approach include the duration (at least 3 years including a 13-week range ﬁnding study and postmortem histopathology) and expense. The authors also acknowledge that the current system is imperfect

Determination: Genotoxicity and Carcinogenicity

185

Table 4 Comparative Data from Transgenic Models rasH2 Genotoxic human carcinogens Cyclophosphamide E Mephalan E Phenacetin + Immunosuppressants Cyclosporin E Hormonal carcinogens DES + Estradiol N

TgAC dermal

TgAC oral

p53 +/–

XPA –/–

XPA –/– P53 +/–

Neonatal mouse

E E N

+ + N

+ + N

+ + N

+ + N

+ + N

+

E

+

+

+

N

+ +

N N

+ E

+ E

+ +

N 2N&1+

Rodent nongenotoxic carcinogens–human noncarcinogens (based on human data) Phenobarbital N N N N N N N Cloﬁbrate (perox + + pro) Reserpine N N N N N N N Dieldrin N N N N N N N Methapyrilene N N N N N N N Rodent nongenotoxic carcinogens–human noncarcinogens (based on mechanism) Haloperidol N N N N N N N Chlorpromazine N N N N N N N Chloroform N N N E N N N Metaproterenol N N N N N N N WY-14643 (perox E pro) DEHP (perox pro) E Sulphamethoxazole N N N N N N N Nongenotoxic/noncarcinogens Ampicillin N N D-Mannitol N N Sulﬁsoxazole N N

N N N

N N N

N N N

N N N

N N N

Abbreviations: N, negative; E, equivocal; +, positive; perox pro, Peroxisome proliferator. Source: Adapted from Ref. 1, 13, 14–19.

for hazard assessment due to the number of false-positives, leading to unrealistic risk assessment when the extrapolation is made to human exposure at relevant dose levels. In addition, the current assays require a large number of animals and provide little information on mechanism of action. These authors suggest that a perfect carcinogenicity assay (in the event that such a beast can be designed) would identify all chemicals that could be potential carcinogens in humans at exposures relevant to humans; would have no false-negatives or false-positives (100% sensitivity and speciﬁcity, respectively), could be used to rank carcinogens according to potency, would identify target organs or tissues and predict the types

186

A Guide to Practical Toxicology 2nd Edition

of tumours expected, be rapid to conduct and inexpensive, and be indicative of mechanism. The likelihood of such an assay being found is fairly small; obtaining consensual agreement to it would be an even higher hurdle. The use of transgenic models was reviewed by MacDonald et al. (14) in an assessment of the utility of genetically modiﬁed mouse assays for identifying human carcinogens. The principal emphasis of the review was on their use as tools in pharmaceutical development, but the comments made illustrate both the prospective utility and the doubts surrounding the use of these models. As indicated in Box 2, the choice of model is critical and is a function of the test material as well as regulatory acceptance of the model and suggested protocol. The availability of the selected strain of mouse is a potentially limiting subset of these problems. The genotoxicity of the test material is clearly a critical consideration and there is still a degree of uncertainty about model selection. This review suggested that the Tg.rasH2 model is preferred model for nongenotoxic test materials and is responsive to genotoxic compounds as well. In looking at the models reviewed, they made the following comments: r p53+/–: The Europeans consider that this model should be acceptable for use r r r r

in pharmaceutical submissions and, in contrast to the American authorities, would not limit its use to compounds that are genotoxic. Tg.rasH2 model: This was considered to be appropriate for genotoxic and nongenotoxic compounds by both Europeans and the Americans. Tg.AC model: This was considered by both sets of authorities as a suitable model for dermally administered pharmaceuticals but doubts were expressed by a U.S. authority about the phenotypic stability of this model. XPA–/– and XPA–/– or p53+/– models: While the Europeans thought that these models were promising, their conclusion was that further development was necessary. There was limited U.S. experience with these models. Neonatal mouse model: This model has been accepted by European authorities and is considered, in the United States to be appropriate in some circumstances for genotoxic compounds.

At the time of this review, the p53+/–, Tg.AC, and Tg.rasH2 assays, which are the most characterized of these models, were used most frequently in pharmaceutical development. There was evidently some debate about the duration of the p53+/– assay with the possibility that this should be increased from 6 to 9 months to increase its utility. While the number of animals in early protocols was 15 per sex per group, it has been concluded that 25 males and 25 females offer a more powerful design. The conclusions of this review were that the assays have value in identiﬁcation of carcinogens and can act as an alternative to the 2-year mouse study in a carcinogenicity testing program. The emphasis was that these assays should not be considered on their own, but that they simply provide one strand of evidence that needs to be considered. The fact that these two reviews were aimed particularly at pharmaceutical development is also signiﬁcant. The new models are expensive and while

Determination: Genotoxicity and Carcinogenicity

187

pharmaceutical companies may have the funding for such tests, other industries assessing chemical toxicity may not. The evolution of new, complex, and expensive assays is unlikely to be immediately welcomed in industries where proﬁt margins are low and cost constraints are rigorously applied. Although safety should not be compromised by cost, pragmatically it is an important consideration; if the new assays are also as irrelevant as the ones they are replacing, in terms of human risk assessment, they will be even less welcome. While the Europeans have been skeptical of these models, toxicologists in the United States have been more enthusiastic. There has been some agreement that these models have potential utility in the assessment of carcinogenic risk but experience in use seems to be diluting the initial enthusiasm. It has been suggested (in a personal communication) that the p53+/– did not give positive results with a number of genotoxic chemicals; however, this lack of positive response may mean simply that in vivo sensitivity to genotoxicity is less than sensitivity in vitro. This lack of concordance between in vitro and in vivo models may simply indicate that in vitro models are over-sensitive. In any case this suggestion casts some doubt on the utility of this model and, perhaps (by implication) on the utility of rodents as experimental models for carcinogenesis. The authors of the review indicate that “general thinking has advanced beyond the notion that the traditional standard approach involving two species of rodent of both sexes exposed over their lifetimes is the only way to assess the carcinogenic potential of compounds in vivo.” This realization may be important, but a cynic would point out that the next leap forward in thinking—that long term studies in rodents are a highly questionable methodology for assessing carcinogenic risk that is relevant to humans—has not been taken. Like a man on a ledge, the concept of the leap is there, but no one has had the courage to take it. Carcinogenic assessment is one of the areas in toxicology with the greatest scope for change in the way it is carried out. As the mechanisms of cancer generation become clearer in both general and speciﬁc senses, more methods of examining for these mechanisms will become apparent. Although identiﬁcation of relevant mechanisms that can be reliably investigated will continue to be slow, it may be expected that there will be gradual acceptance of new protocols and investigations. This aspect of carcinogenicity is discussed below. PITFALLS IN CARCINOGENICITY STUDIES Inevitably, with these studies, there is considerable potential for pitfalls that have great signiﬁcance for individual studies and the future of chemical safety evaluation. These can occur in any aspect of the study, starting with design and ﬁnishing with the conclusion. The design of the classic bioassay is much dictated by tradition and regulatory preference and, with careful consultation, it should be relatively easy to avoid mistakes in this area. The possible exception to this is housing. Authorities in the United States have tended to prefer single housing for rats and mice, whereas Europeans tend to house them in groups of up to ﬁve of the same sex. Rats are

188

A Guide to Practical Toxicology 2nd Edition

social animals and are less stressed when housed in this way. However, male mice tend to ﬁght and the injuries can reduce survival and compromise the validity of the study, especially if the test substance increases aggression. For this reason, male mice are housed singly. The design of cages and the use, or not, of bedding, also provide some dilemmas. In studies where the test substance is mixed with the food, the amount of food discarded is a useful indication of palatability and is a critical factor in maximizing the accuracy of calculation of achieved dose levels. It is difﬁcult to produce a sensible estimate of food scatter where the animals are housed in solid bottom cages with sawdust bedding. Such estimates are much more secure when the cages have mesh ﬂoors suspended over absorbent paper (although these cages are not generally used for mice). It is now considered that sawdust bedding is better, as it is not associated with granulomatous lesions on the feet, which can lead to early sacriﬁce of the animals. Dose level choice is critical in these studies and correct design of the dose range-ﬁnding studies is vital, as is the careful interpretation of their results. Poor palatability of food in dietary studies can lead to lower bodyweight gain in comparison with the controls; but it is doubtful that a 10% decrease in bodyweight due to this would be accepted as evidence of toxicity. This could mean that the MTD was not reached and that, accordingly, the study objective was not achieved. Although the MTD is accepted as a method of dose level choice, it is better to have other support for this, for instance, pharmacokinetics. Equally it should be reiterated that poor survival, due to excess toxicity or to characteristics of the chosen test strain, may also produce an invalid study. Once the study is designed and any controversy produced is overcome, the most contentious issue is the way in which the data are evaluated and interpreted. Faulty collection of the data will confound accurate interpretation. This includes incorrect estimation of food consumption and poor recording of clinical observations, particularly those relating to palpable masses, which affects the estimation of time of onset of tumour formation. This can be important where the tumour concerned is seen at high incidences and earlier onset may indicate treatmentrelated tumorigenesis. Inevitably, this leads us to the conduct of the necropsies and accuracy of recording of existing masses or tumours and their relationship to the clinical record. Once all the tissues have been sectioned and slides prepared, their evaluation is possibly the cause of more controversy and debate than any other part of the study. While toxicological pathology is clearly a science, it is a science with a high “art” content. Terminology can differ among pathologists and interpretation of the sections can differ widely. For age-related analysis of the data, it is important that correct decisions are made as to whether a tumour was fatal, probably fatal, probably incidental, or incidental. Skewing these decisions can produce different interpretations of the data. One-way round this is to ensure that the peer review of the sections is without reproach. In the event of disagreement, particularly in studies that are contracted out, a second or third pathologist opinion may not help the overall conclusion, as the original report will always stand as a valid alternative opinion.

Determination: Genotoxicity and Carcinogenicity

189

One histopathological trap, especially where there are treatment-related increases in necropsy ﬁndings, is the tendency to examine more sections from treated animals than from the controls. The tissue typically affected in this respect is the liver, for which it is normal to examine two sections from different lobes in every animal. If necropsy shows a lesion in another lobe from those sampled routinely, that lesion is sampled in addition to the scheduled sections; discovery of a tumour in the additional section will increase the tumour incidence in that particular animal and in the treatment group as a whole. In strains where there is a high incidence of liver tumours, this has the effect of biasing the incidences upwards and can suggest a treatment-related increase in tumour incidence, where there is none. In addition to these factors, there are others which have less impact but which can still be signiﬁcant. The presence of high incidences of common tumours in control animals will tend to blunt the analysis of the data. Accordingly, the presence of good background data, or at least two control groups, is crucial in evaluation of the results. Complications are also introduced when the mechanism of toxicity is not present in humans, as is usually the case with nongenotoxic carcinogenesis. In shorter studies in rodents or in studies in vitro, the same basic precautions in study design, dose level choice, and evaluation have to be observed, with the added complication that the technical conduct of the study has to be consistent with practice in other laboratories. This is particularly the case with the more complex in vitro assays such as the Comet assay. However, perhaps the biggest pitfall in this type of study is in the understanding of the changes seen and their interpretation. If the origins of the data and the mechanisms of their generation are not understood, it is not possible to draw a supportable conclusion. Overview of the Future of Carcinogenicity Assessment In looking at the future of carcinogenicity assessment, it is probably worth taking a step back and surveying the ﬁeld as it stands at the moment. Alan Boobis has pointed out (in a presentation to the British Toxicology Society Continuing Education Programme in 2006) that in the current test paradigm, compounds are tested at high doses in lifetime studies in rodents, in which the background incidence of some tumour types is very high (for instance, testicular tumours in Fisher F344 rats). The basis of the risk assessment is tumour incidence, but the relevance to man of such tumours produced at high doses is highly questionable. In addition, carcinogenicity may be secondary to toxicity expressed at these high doses. Quite apart from this sort of basic analysis, there have been a number of reviews examining the utility of the two-rodent bioassay test program in pharmaceutical and agrochemical development (15,16,17). Gaylor (16) carried out an analysis of carcinogenicity studies under the auspices of the U.S. National Toxicology Programme and suggested that almost all of the chemicals selected would bring about a statistically signiﬁcant increase in tumours at the MTD, if a larger sample size had been used (more animals, up to 200 per group, which is clearly unrealistic). On this basis, the bioassay based

190

A Guide to Practical Toxicology 2nd Edition

on the MTD is not distinguishing between carcinogens and noncarcinogens but simply not detecting weak carcinogens. In other words, it is simply a screen for potent cytotoxins at the MTD. Gaylor suggests that a bioassay should investigate the relationship between dose and cytotoxicity or other mechanisms that could result in an excess tumour burden, rather than whether a chemical is a carcinogen. If it is accepted that the results of the classic rodent bioassay are of dubious relevance to humans, it becomes necessary to examine other methods of assessment of carcinogenic potential. Overall, it is relatively simple to detect genotoxic chemicals using established methods without the use of a full-length rodent bioassay. Equally, it has been shown that detection of nongenotoxic carcinogenesis in rodents is relatively easy. The challenge is to detect nongenotoxic carcinogenesis that is relevant to humans. Having said that, it is increasingly apparent that there are elements of promotion in cancer that are due to nongenotoxic chemicals or mechanisms, even with chemicals that are strongly genotoxic. It is also apparent that there is no simple battery of tests currently in existence that will reliably predict human carcinogenicity. It is usual to consider the results of a range of tests in order to assess carcinogenic potential; however, it is clear that there is considerable scope to develop new tests that examine mechanisms of carcinogenesis that are not currently covered. To answer the question about how to test for carcinogenic potential, it is worthwhile considering the origins of cancer as a multistep process. Typically, mutations in several genes are necessary, such as conversion of proto-oncogenes to oncogenes and inactivation of tumour suppressor genes. Mutations may result from direct interaction of a chemical or its metabolites with DNA or indirectly through the generation of reactive oxygen species, which are also present endogenously. If an endogenous process leads to excess production of such reactive species and there is, for whatever reason, a deﬁcit in their removal, cancer may result. Normal cellular replication is inherently error-prone and the number of errors is likely to rise when replication is stimulated. However, it should be remembered that unrepaired DNA does not by itself mean that cancer is inevitable. If there is a deﬁciency in DNA repair, cancer becomes more likely, but an initiated cell (DNA-damaged or altered) will not give rise to a cancer unless it is stimulated to divide and allowed or encouraged to proliferate. A further factor here is that the body’s natural defences, principally the immune system, have to ignore the nonself replication that is taking place. The stimulus for growth may be endogenous or exogenous. Overall, Alan Boobis points out that increased DNA damage is procarcinogenic if the cell survives and that unprogrammed increases in cell proliferation or cell survival are also both procarcinogenic. These effects may be secondary to toxicity and are often subject to a threshold dose or concentration, below which carcinogenicity will not be seen. He suggests that the threshold for toxicity is the same or lower than the threshold for carcinogenicity. These basic considerations may be used to inform a test strategy for carcinogenicity that does not use a life span study in rodents, although it has to be acknowledged that rodents will probably still have a role to play in these assessments.

Determination: Genotoxicity and Carcinogenicity

191

One of the ﬁrst techniques that can be applied to assess carcinogenic potential is the use of an expert system to examine structure–activity relationships in the molecule. There are several such systems available and they are discussed in greater detail in chapter 12; however, it should be noted that they are principally of use in detection of structural groups associated with genotoxic carcinogenesis. This is due to the inherent reactivity of these agents or their metabolites and the presence of DNA as a common target. In the case of nongenotoxic carcinogens, attribution of effect to structural aspects of molecules is much more complex, due to the very wide range of mechanisms through which such carcinogenicity can be expressed. Where a particular structural group is associated with a particular nongenotoxic effect, for instance, peroxisome proliferation or nephropathy due to ␣2u-microgloubin, there is a possibility that this may be entered into computer databases for detection in future structures. However, the extent of the problem is underlined by the structural diversity of compounds that are associated with peroxisome proliferation. Table 5 sets out a number of factors or effects that are important in nongenotoxic carcinogenesis and looks at how these effects may be detected. Additional mechanisms that can be investigated include changes in receptor interactions, which may be assessed through changes in the activity of tyrosine kinases. A proportion of these events can be covered in routine toxicity studies, either within the current set of examinations or by extending those examinations to take in new endpoints. Examples include immune suppression, as seen with cyclosporine, hormonal imbalance, or using the comet assay to assess DNA damage in target tissues. Extension of routine histological processing and examination to include immunocytochemistry for speciﬁc markers of precancerous change is a relatively simple and cost-effective method of increasing the database for assessment of carcinogenic potential. With increasing understanding of the factors and mechanisms relevant to carcinogenicity the spectrum of options, by which to investigate carcinogenic potential, is growing all the time. For example, the link between epigenetic change and cancer is becoming more apparent and this is clearly an avenue that should be explored. J. E. Trosko has been at the forefront of the ﬁeld in advancing the claims of epigenetic change as a crucial element in carcinogenesis. He and others, have challenged the dogma that mutagenesis equals carcinogenesis and indicated forcefully that this is not the simple picture that purists (if there are any left) would like to believe. Trosko and Upham (18) offer a broad deﬁnition of an epigenetic change as being one which changes genomic expression at the levels of transcription, translation, or post-translation. This is the study of heritable changes in gene expression that happens without changes in the sequence of the DNA. In a 2004 paper, Moggs et al. (19) reviewed the implications of epigenetics and the relationship to cancer in the context of pharmaceutical development. The paradigm of the last two decades has been that cancer is due to damage to DNA or to alterations in cell growth, probably through changes in gene expression

A Guide to Practical Toxicology 2nd Edition

192

Table 5 Processes or Mechanisms in Carcinogenicity and Markers of Effect Mechanism or endpoint

Marker

Where or how assessed?

Immune suppression

Leukocyte differential counts and plasma immunoglobins; histology of lymphoid organs, T-cell activity. Loss of host resistance Histopathological change. Lipid peroxidation, decreased glutathione concentrations; lipid breakdown products Test for gap junction patency

In routine toxicity or speciﬁc studies.

Chronic cell damage. Increased oxidative damage

Changes in intercellular communication Inhibition of tubulin polymerization Cell proliferation

Hormonal disturbance

Chronic inﬂammation

Faulty DNA repair Alterations in apoptosis, especially inhibition Promotion

DNA damage in vivo

Function of spindle formation in mitosis or meiosis – aneugenesis Hyperplastic foci. Proliferating cell nuclear antigen Hormone levels, e.g., thyroid hormones or oestrogens Histological examination, sometimes backed up by clinical observations Altered function Histological examination. Over-expression of p53 gene Alterations in gene expression and precancerous lesions or foci DNA adducts, DNA synthesis

Changes in gene expression

Protein levels

Epigenetic changes in DNA

Methylation levels

Source: Adapted from Ref. 1.

Metabolite studies, in vitro studies, antioxidant concentrations. Routine toxicity studies. Proteomics or genomics. In vitro cellular systems. Staining for connexin shows gap junctions Tests under development

In routine toxicity studies and in proliferation responsive cell lines. In routine toxicity studies

In routine toxicity studies

In vitro in speciﬁc bacterial assays In routine toxicity studies in vitro tests and genomics. TUNEL assay In routine toxicity studies or in speciﬁc promotion studies. Genomics Urine. Comet assay. Unscheduled DNA synthesis Proteomics in vivo or in vitro Routine toxicity or specialist studies

Determination: Genotoxicity and Carcinogenicity

193

driven by receptor-mediated events. However, the authors indicate increasing evidence that other factors can affect gene expression, including changes in DNA methylation and in the chromatin, and in the function of molecules at the cell surface. The genetic code may be altered by DNA methyltransferases together with proteins associated with the chromatin such as enzymes that modify histones. These changes contribute to the establishment and maintenance of altered genetic states; this affects cancer but is also important in other toxicities. This theme was further developed by Serman et al. (21) in 2006, in a paper on DNA methylation as a regulatory mechanism for gene expression in mammals. These authors indicate three distinct epigenetic mechanisms that give an extra level of control to transcription and so regulate gene expression. These are: RNA-associated silencing, DNA methylation, and histone modiﬁcation, which are critical in the normal development and growth of cells. Methylation of DNA is involved in silencing genes at transcription, regulates imprinted genes and several tumour suppressor genes. DNA methylation has a role in normal embryonic development as well as in carcinogenesis. Trosko and Upham (18) examined concepts that have been ignored in carcinogenesis and particularly challenged the concept that a carcinogen is inevitably a mutagen and that the rodent bioassay is useful and relevant in the prediction of risks for human cancer. Taking a step back, the authors point out that a chemical that enters the body is distributed to tissues with three different types of cell: a few adult stem cells, progenitor cells, which would be expected to divide to form new cells (as in the bone marrow), and terminally differentiated cells. These cells interact through intercellular gap junctions and extracellular communication mechanisms. Although all may be damaged by chemicals they may not be damaged to the same extent or in the same way. In designing new tests for carcinogenic potential, it should be remembered that carcinogenesis occurs in an environment that is complex and where the target cell is one cell in a tissue, which has a range of intercellular interactions. Many chemicals that contribute to the carcinogenic process do so without causing mutations of necrotic cell death. While it is clear that epigenetic mechanisms play a crucial role in carcinogenesis, devising a test or tests for them is difﬁcult. In view of the complexity of the in vivo environment during carcinogenesis, devising a simple in vitro assay is likely to be a long-term project. However, it seems likely that a battery of carefully chosen tests may be able, eventually, to indicate carcinogenic potential. It is likely that animals will continue to play a role in such experiments. Work reported by Yaxiong Xie et al. (22) is an illustration of the type of research in progress. They found that exposure of pregnant mice to arsenic in the drinking water during organogenesis was associated with altered DNA methylation and aberrant gene expression in the livers of the new born mice. The liver is a target for arsenic carcinogenesis and this work is indicative of the type of change that may be looked for in vivo. While it is tempting to rush into developing new tests for mechanisms relevant to carcinogenesis, it would be better to take a more detached view at ﬁrst

194

A Guide to Practical Toxicology 2nd Edition

and then to devise a strategy from which new tests can be designed and validated. A number of toxicologists, including S. M. Cohen and Alan Boobis, have been putting forward the arguments for a change in the carcinogenic assessment process. Cohen (23) points out that the underlying assumptions of the current approach are that the results in animals are relevant to man (species-to-species extrapolation) and that exposures achieved in animals at high doses are relevant to man (doseto-dose extrapolation). However, these comfortable assumptions are increasingly undermined as experience and understanding grow. Cohen places an emphasis on evaluating reactivity of the chemical with DNA and increase in cell proliferation that may be due to the test chemical. Both Cohen and Boobis, emphasize the need to establish the mode of action or mechanism by which the chemical has its effects. The relevance of the ﬁndings to humans can be assessed by answering following three questions: 1. Has the mode of action been established in animals? 2. Is this mechanism plausible in humans? 3. When pharmacokinetics and dynamics are considered, is the mechanism still relevant to humans? The concept is that a combination of computerized models, existing genotoxicity tests, and other in vitro assays, together with studies up to 13-weeks in rodents should provide the required mechanistic understanding. Clearly, some pharmacokinetic data will be required from humans. This is not a problem for pharmaceuticals but raises ethical questions when chemicals from other classes, such as pesticides, are being evaluated; in these cases, it is possible that microdosing techniques (administration of radiolabeled compound at doses 10 to 100 ␮g, which probably gives a realistic human dose) may well have potential in this contentious area. It is misleading in some ways to divide xenobiotics into classes such as pharmaceuticals, agrochemicals, or plant protection products. They are all foreign chemicals, and while the regulations for the tests addressed are different, the approach should be similar. It is clear that a stepwise or tiered approach to carcinogenicity testing would be appropriate and this has been put forward by Doe et al. (17), in respect of safety assessment of agrochemicals. These authors have suggested that the emphasis should be on producing data that are relevant to shorter periods of human exposure; they place less emphasis on long-term toxicity studies and they do not recommend a mouse carcinogenicity study. All the data are considered in deciding a testing strategy. The end result should be the use of fewer animals to produce more relevant data. There is still the desire to stay loyal to the paradigm of testing for carcinogenicity in rodents, although this is changing gradually. While Jacobson-Kram (20) suggested that the transgenic models available now are not perfect tests for carcinogenicity he also said that a chronic rat study in combination with a transgenic mouse may be a useful approach. However, he also says that the use of transgenic models may be an interim measure in the development of better

Determination: Genotoxicity and Carcinogenicity

195

tests. The use of toxicogenomics and proteomics will, eventually, aid the process of carcinogenic evaluation, although it is clear that the data will require careful interpretation, especially as it would be expected to be voluminous and complex. There is no doubt that the world of carcinogenicity assessment is changing. Although there are clearly simple extensions to routine testing, there are areas of nongenotoxic effects that will also become routine as the tests are developed, such as the function of intercellular gap junctions, which are essential for communication among cells. This communication has various roles in areas as diverse as cardiac function and embryonic development; in carcinogenesis, the gap junctions are responsible for the exchange of small molecules that inhibit cell division— so-called contact inhibition. Where this communication is disrupted, uncontrolled proliferation can result. High-dose administration of carbon tetrachloride has been associated with reductions in connexin and gap junction communication. The formation of a functional spindle apparatus is critical to successful mitosis or meiosis, and this is disrupted by compounds that inhibit polymerization of tubulin. Inhibition is reﬂected in aneugenesis—abnormality of chromosome number or structure—and this may be detected in cytogenetic assays, although more speciﬁc tests are under development. Other examinations oriented towards the detection of proliferation include proliferating cell nuclear antigen and changes in apoptosis. Inhibition of apoptosis is an important mechanism for nongenotoxic carcinogenesis, the process of which is becoming better understood. Apoptosis can be induced in cell lines by changes in the culture media, for instance, removal of fetal calf serum, and may be assessed through induction of enzyme markers, which are known factors in the process of programmed cell death. Numerous other in vitro systems have been investigated for detection of nongenotoxic carcinogens, such as the Syrian hamster embryo cell transformation assay; it should be noted that this assay is not recommended for regulatory screening for carcinogenicity. The usual potential limitations of differences in metabolism and elimination in vitro exist in these assays. However, there is considerable scope for incorporation of oncogenes or inactive tumour suppressor genes and these tests will develop further. An examination of changes in the thyroid, kidney, and liver of rodents following exposure to nongenotoxic carcinogens by Elcombe et al. (24) concluded that there was no speciﬁc single alert for carcinogenesis in these organs but that careful choice of a range of markers could prove to be predictive, when time of evaluation and class of chemical were taken into account. The relevance of new assays to human carcinogenesis must be established for them to have their own credibility, rather than relying on the possibly ﬂawed data from rodent carcinogens. There does not appear to be any sensible way at the moment of monitoring the early stages of progression, other than by the appearance of tumours. It is possible that protein analyses, particularly in urine using nuclear magnetic resonance spectra, may be of use here. Proteomics and genomics will become more powerful as their science develops. This can be used to assess the concentrations or levels of different

A Guide to Practical Toxicology 2nd Edition

196

GENOTOXIC? NO

YES

Immune suppression or estrogenecity?

NO

Relevant mechanism?

YES

YES

NO

Increased DNA replication?

NO

RISK ASSESSMENT

YES

YES

Relevant exposure?

Cytotoxic? NO

YES Relevant mechanism?

NO RISK

YES

NO

NO

NO RISK

Figure 1 A ﬂow chart for carcinogenicity risk assessment. Source: Adapted from Ref. 23.

protein products of genes, particularly oncogenes and proto-oncogenes or of the genes themselves. The study of protein expression and the association of particular proteins with carcinogenesis would be a useful investigation to be added to standard toxicity studies. This sort of investigation may also have some relevance to examination of human samples in clinical trials of pharmaceuticals or in surveillance of patients after marketing is authorized. There are also factors in carcinogenicity that are not readily tested in toxicity studies, as they are of relevance to the individual rather than to the population as a whole. These include the roles in carcinogenesis of viruses, diet and caloric

Determination: Genotoxicity and Carcinogenicity

197

intake, and genetic susceptibilities such as those predisposing individuals to breast cancer or to the skin cancer xeroderma pigmentosum, due to faulty DNA repair following UV irradiation. Ultimately genomics will become crucial in assessing an individual’s chance of developing cancer, particularly where there is a family history of a particular type of cancer. In the future, it is probable that there will be an overall assessment of the results of a battery of tests, which should be chosen according to the class of chemical being investigated. This assessment will begin with a computerbased assessment of the structure of the chemical and its possible or probable metabolites, which will also be predicted. Although pharmacokinetic prediction is not particularly reliable at the moment, when based solely on structure and calculated partition coefﬁcient, the role of physiological-based pharmacokinetic models will grow. From these initial assessments, the design of the toxicity studies may be adjusted to test the early predictions and, as the database develops, the study designs can be further reﬁned. Speciﬁc in vitro tests will then be conducted to examine for common carcinogenic mechanisms or for those considered relevant to the test chemical. It is also probable that this battery will not include 2-year bioassays in rodents, except in special circumstances. The mechanisms of toxicity, which can be investigated in a focused manner in vitro, will become more important a priori rather than being examined after the toxicities have been expressed. The overall effect of this would be expected to reduce the numbers of animals used in box-checking studies and to increase the relevance and focus of information in the database, allowing an assessment of carcinogenic potential in the target species, usually humans. An attractive side effect of this increased focus is likely to be a reduction in the development times of chemicals by at least 2 years. The ﬂow chart for such a test program is indicated in Figure 1, adapted from Cohen (23). REFERENCES 1. Woolley A. A Guide to Practical Toxicology. 1st ed. London: Taylor & Francis, 2003. 2. Kirkland D, Aardema M, Henderson L, et al. Evaluation of the ability of a battery of three in vitro genotoxicity tests to discriminate rodent carcinogens and non-carcinogens I. Sensitivity, speciﬁcity, and relative predictivity. Mutat Res 2005; 584(1–2):1–256. 3. Kirkland D, Aardema M, Muller L, et al. Evaluation of the ability of a battery of three in vitro genotoxicity tests to discriminate rodent carcinogens and non-carcinogens II. Further analysis of mammalian cell results, relative predictivity, and tumour proﬁles. Mutat Res 2006; 608(1):29–42. 4. Sasaki YF, Sekihashi K, Izumiyama F, et al. The comet assay with multiple mouse organs: Comparison of comet assay results and carcinogenicity with 208 chemicals selected from the IARC monographs and U.S. NTP Carcinogenicity Database. Crit Rev Toxicol 2000; 30(6):629–799. 5. Kirkland D et al. How to reduce false-positive results when undertaking in vitro genotoxicity testing and thus avoid unnecessary follow-up animal tests: Report of an ECVAM Workshop. Mutat Res 2007; 628(1):31–55.

198

A Guide to Practical Toxicology 2nd Edition

6. Thybaud V., Aardema M., Clements J., et al. Strategy for genotoxicity testing: Hazard identiﬁcation and risk assessment in relation to in vitro testing. Mutat Res 2007; 627:41–58 7. Festing MF. Use of a multistrain assay could improve the NTP carcinogenesis bioassay. Environ Health Perspect 1995; 103(1):44–52. 8. Festing MFW. Properties of inbred strain and outbred stocks with special reference to toxicity testing. J Toxicol and Environmen Health 1979; 5(1):53–68. 9. ILSI data relevant to this study (presented by RW Tennant at a Satellite Symposium to Eurotox 2000) are available at http://dir.niehs.nih.gov/dirlecm/. 10. Tennant RW. Application of Transgenic Models for Toxicological Characterization. Crisp Data Base. Bethesda, MD: National Institutes of Health. 11. Tennant RW. Transgenic Mouse Models for Identifying and Charaterizing Carcinogens. Crisp Data Base. Bethesda, MD: National Institutes of Health. 12. Tennant RW. Evaluation and validation issues in the development of transgenic mouse carcinogeniticity bioassays. Environmental Health Perspectives 1998; 106(suppl 2):473–476. 13. Cohen SM, Robinson D, MacDonald J. Alternative models for carcinogenicity testing. Toxicol Sci 2001; 64:14–19. 14. MacDonald J, French JE, Gerson RJ, et al. The utility of genetically modiﬁed mouse assays for identifying human carcinogens: A basic understanding and path forward. The Alternatives to Carcinogenicity Testing Committee ILSI HESI. Toxicol Sci 2004; 77(2):188–194. 15. Van Oosterhout JP, Van Der Laan JW, De Waal EJ, et al. The utility of two rodent species in carcinogenic risk assessment of pharmaceuticals in Europe. Regul Toxicol Pharmacol. 1997; 25(1):6–17 16. Gaylor DW. Are tumor incidence rates from chronic bioassays telling us what we need to know about carcinogens? Regul Toxicol Pharmacol. 2005; 41(2):128–133. 17. Doe JE, Boobis AR, Blacker A, et al. A tiered approach to systemic toxicity testing for agricultural chemical safety assessment. Crit Rev Toxicol 2006; 36(1):37–68. 18. Trosko JE, Upham BL. The emperor wears no clothes in the ﬁeld of carcinogen risk assessment: ignored concepts in cancer risk assessment. Mutagenesis. 2005; 20(2):81–92. 19. Moggs JG, Goodman JI, Trosko JE, et al. Epigenetics and cancer: Implications for drug discovery and safety assessment. Toxicol Appl Pharmacol 2004; 196(3):422– 430. 20. Jacobson-Kram D, Sistare FD, Jacobs AC. Use of transgenic mice in carcinogenicity hazard assessment. Toxicol Pathol 2004; 32(Suppl. 1):49–52. 21. Serman A, Vlahovic M, Serman L, et al. DNA methylation as a regulatory mechanism for gene expression in mammals. Coll Antropol 2006 Sep; 30(3):665–671. 22. Yaxiong Xie, Jie Liu, Lamia Benbrahim-Tallaa, et al. Aberrant DNA methylation and gene expression in livers of newborn mice transplacentally exposed to a hepatocarcinogenic dose of inorganic arsenic. Toxicology 2007 Jul; 236(1–2):7–15. 23. Cohen SM., Human carcinogenic risk evaluation: An alternative approach to the two-year rodent bioassay. Toxicol Sci 2004; 80(2):225–229. 24. Elcombe CR, Odum J, Foster JRet al. Prediction of rodent nongenotoxic carcinogenesis, evaluation of biochemical and tissue changes in rodents following exposure to nine nongenotoxic NTP carcinogens’. Environ Health Perspect 2002; 110(4):363–375.

8 Determination: Dermal Toxicity—Sensitization, Irritation, and Corrosion

INTRODUCTION For the most part, this chapter deals with dermal toxicology but in the specialist sense of the three main aspects of dermal effects that are examined in regulatory toxicology: sensitization, irritation, and corrosion. It does not seek to cover general, reproductive toxicity or carcinogenicity studies that may be needed in the development of a pharmaceutical or agrochemical and which are very similar to other studies of that type, the only real difference being the route of administration. This chapter deals with study types that are most relevant to occupational health, which is a fairly specialized area that is sometimes poorly understood by people unfamiliar with the unsuspected complexities of successful study conduct and interpretation. It does not cover respiratory sensitization, which is a factor in occupational disease, for instance, allergy to animals in testing facilities or farmer’s lung, which is associated with breathing the dust from moldy hay. Before looking at the testing needed to evaluate these three end points, it is worth considering their characteristics. r Irritation is a reversible nonimmunological response at the site of contact, which may be seen as erythema (reddening of the skin) or oedema (thickening due to accumulation of ﬂuid under the skin). r Corrosion is not reversible and is characterized by the production of irreversible damage at the site of contact as a result of chemical reaction. Both irritation and corrosion are dose-dependent reactions. 199

200

A Guide to Practical Toxicology 2nd Edition

r Sensitization, in contrast, is an immunological reaction that, while it has dose dependency in the induction stage, is not clearly dose dependent following induction. Furthermore, the amounts of chemical needed to elicit an allergic reaction are much smaller than those needed during the induction phase. From this it is evident that the processes involved in sensitization and expression of allergy are more complex than for the former two end points, making assessment of sensitization in vitro more difﬁcult. Although the emphasis of this chapter is on the skin, the examination of ocular irritation is also considered brieﬂy. GENERAL PRINCIPLES OF DERMAL TOXICOLOGY The skin is the largest organ in body, up to 2 m2 and forms one of the three most signiﬁcant routes of exposure, with oral and respiratory, especially in a domestic or occupational setting. The agents involved come from numerous sources but can be industrial chemicals, pharmaceuticals or agrochemicals and their intermediates, or chemicals encountered in routine domestic existence, among which cosmetics are a signiﬁcant inclusion. The most typical dermal reaction is inﬂammation, characterized by redness, swelling, and heat, in response to irritants, sensitizing agents, or phototoxic substances; corrosive agents can produce disﬁguring burns and excessive UV irradiation is associated with skin cancer. In testing programs, dermal irritation and sensitization are often considered together as they are not usually central to a development plan but are clearly of interest in an occupational or domestic context. Statements on irritation and sensitization are essential in Material Safety Data Sheets that accompany chemicals sold to industry. There is some lack of consistency in nomenclature for the allergic form of skin irritation, contact hypersensitivity, or allergic contact dermatitis being used according to source. There is a clear distinction between dermatitis due to irritation and allergic contact dermatitis. The former is associated with a dose- or concentrationdependent reaction that is due to direct interaction of the chemical or mixture with local skin constituents; the response is usually immediate, localized and requires similar concentrations in subsequent exposures to elicit a similar effect. This form of dermatitis is distinct from the burns that are due to corrosive chemicals such as strong acids or bases. With allergic contact dermatitis, there is a period during which relatively large amounts of the chemical may be tolerated without any obvious effects; this reaction-free period (induction) can last for years. After this initial period, sensitivity develops (in susceptible individuals), which may produce severe reactions triggered by minute amounts of the substance. There is usually a clear difference in effective concentrations between a pure irritant and one that has induced contact sensitivity.

Determination: Dermal Toxicity—Sensitization, Irritation, and Corrosion

201

Whereas a relatively simple set of chemical reactions determines irritation, allergic contact dermatitis is driven by a complex set of processes. These start, typically, with the passage of a hapten (a complex of a small exogenous molecule with an endogenous protein) into a Langerhans cell in the epidermis, where it is processed and passed to a regional lymph node for presentation to T lymphocytes. Interleukin-1, produced by the Langerhans cell, stimulates the T cell to produce cytokines, which cause sensitized T cells to proliferate and act in the production of the clinical signs of sensitization at the site of exposure. While laboratory animals may show only erythema and oedema, humans may show a wider range of symptoms, including pruritus, erythema, oedema, papules, or vesicles. Contact dermatitis is a major cause of occupational ill-health and is an area of concern to toxicologists assessing exposure limits for the workplace; allergic contact dermatitis is less common but is, perhaps, of greater signiﬁcance because of the very low exposures that are needed for a signiﬁcant response. In a similar context, respiratory sensitization is also a signiﬁcant occupational hazard in some settings, for instance to animals in toxicology test facilities. Phototoxicity is also a potential problem; for instance, the presence in celery of psoralens has been associated in celery pickers with extensive skin reactions brought about by sunlight-induced reaction of the psoralens with DNA, inhibiting DNA repair. Treatment of psoriasis with so-called Psoralen and UVA (PUVA) therapy—8-methoxypsoralen and UV light—was associated with the induction of cancer. Certain cosmetic ingredients have also been associated with phototoxicity and with more mundane forms of dermatitis. It is worth pointing out that there is a distinction to be drawn between phototoxicity and photoallergy and vice versa. Phototoxicity is likely to occur on ﬁrst exposure, it is dose related, and may be seen after systemic or topical exposure. The mechanism is usually one of photoexcitation, leading to the generation of oxygen or other free radicals. Psoralens intercalate with DNA-producing adducts and inhibition of DNA synthesis. Photoallergy is a delayed type IV hypersensitivity reaction, which—as with other routes of sensitization—requires prior sensitization. Following induction, small amounts of exposure can lead to a reaction. Photoallergy induced by topical exposure is known as photocontact dermatitis and by systemic exposure as systemic photoallergy. FACTORS IN DERMAL TOXICITY Toxicity in the skin is affected by factors (summarized in Box 1) such as local humidity/moisture, temperature, local injury, exposure to light, local concentration and location, and area exposed. Increased temperature and moisture, as found when the treatment site is occluded by a bandage, act to increase the local reaction. Location on the body is signiﬁcant because the skin differs in thickness from one area to another and this affects the reactions seen, the head and neck being more sensitive than the palms of the hands or soles of the feet.

202

A Guide to Practical Toxicology 2nd Edition

Box 1 Factors to Consider in Dermal Toxicology The following is a guide to the factors that should be considered in the conduct of dermal toxicity studies, whether for occupational safety or for pharmaceutical development. r Form or formulation. This has far-reaching effects on absorption into or

r r r r r r r

through the skin. Many vehicles or solvents enhance absorption; the toxicity of a chemical used “as supplied” can be transformed by the addition of an appropriate carrier solvent. Location of exposure. The thickness of skin varies across the body. Although this is important in humans, in animals the site of application is usually on the shaved or clipped back. Area exposed and local dose. The local concentration of the chemical and the size of the application site (cms2 ) are usually more important in determining local effects than the dose in mg/kg. Skin conditions at the site of exposure. Warmth, humidity, skin damage, and local vasodilation enhance absorption and local effects. These are clearly relevant in animals’ studies in which the application site is occluded. The local concentration and the area of exposure are more important in determining the extent of local reaction than the dose expressed in terms of mg/kg. Dermal metabolism. The skin has signiﬁcant metabolic capability, which can enhance local toxicity or produce reactive haptens leading eventually to sensitization. Local effects may limit investigation of systemic toxicity. Excessive reaction at the application site may lead to the termination of repeat dose toxicity studies. Physicochemical properties. These include partition coefﬁcient (lipophilicity) of the chemical, molecular weight, and pK a . Chemical reactivity may lead to complex formation with macromolecules or results in irritation. Small lipophilic molecules are better absorbed than large polar ones.

While it is probably not entirely useful to single out any one of these as being the most critical to take into account in designing or assessing dermal toxicity studies, it is possible to make some general remarks. The form or formulation in which the chemical reaches the skin is a critical factor, as this can have a huge inﬂuence on transdermal absorption. This effect is so signiﬁcant that toxicity testing of topical pharmaceuticals is undertaken with a formulation that is as close as possible—preferably identical—to that to be used clinically. Deviation from this formulation may require extensive retesting. For occupational toxicity, particularly irritation studies, the materials are often used “as supplied” albeit moistened with water and applied to a moistened site.

Determination: Dermal Toxicity—Sensitization, Irritation, and Corrosion

203

The concentration of a chemical that can be applied in repeat dose toxicity studies may be limited by the local effects seen and is often more important than the dose expressed in mg/kg of bodyweight. Local concentration also determines extent of sensitization but not of subsequent allergic reactions. Dermal application is not a normal route for investigation of systemic toxicity; in fact, the dermal route can be used to demonstrate the absence of systemic toxicity, which can be important in several ﬁelds of use, such as pharmaceuticals and agrochemicals. Although it is possible to produce dermal toxicity as a result of systemic exposure through the blood system, this is relatively unusual and the potential for phototoxicity should be borne in mind. The skin also has signiﬁcant metabolizing capability that can result in the production of sensitizing or photoreactive molecules. The condition of the skin at the site of exposure is also important as abrasion or other damage may enhance absorption. Transdermal absorption may also be increased by local vasodilation, which can maintain a diffusion gradient by removal of chemical from the dermis into the blood stream. In human terms, the presence of skin disease, such as psoriasis, is also likely to affect local absorption and reaction. Dermal toxicity studies are usually conducted with some form of occlusion of the application site. This involves application of a gauze and a waterproof layer over the site and application of a wrapping to keep the dressing in place for a deﬁned period (usually 6 hours in repeat dose studies). The OECD guidelines recommended that this be done for studies up to 90-days duration, but in practice the 28-day study is the longest in which the animals are wrapped up on a daily basis. Physicochemical factors that affect dermal toxicity include lipophilicity (indicated by the partition coefﬁcient), molecular weight, pK a , the pH of any solution, and the ease with which it reacts with local proteins to form haptens that could result in allergic sensitization. Small lipophilic molecules are more likely to be absorbed than large lipophobes and reactive molecules are more likely to be associated with hapten formation than unreactive ones. TEST SYSTEMS Test systems for irritation and sensitization can be divided between the traditional—rabbit and guinea pig—and the new—in vitro systems for irritance and corrosivity studies and mice for assessment of allergic sensitization. The rabbit has been used for many years in the assessment of dermal and ocular irritations, although it is generally considered to be a more sensitive model in comparison with human skin. It is now being replaced gradually by in vitro systems; negative results in such a test can then be conﬁrmed with a small in vivo study. As with the eye, the processes of dermal irritation in humans are complex and are therefore difﬁcult to reproduce in vitro. There is a number of skin equivalents using dermal keratinocytes, which can be used to assess some aspects of ocular damage. The assessment of corrosivity is theoretically easier in vitro in view of the simpler

204

A Guide to Practical Toxicology 2nd Edition

nature of the damage caused (i.e., direct reaction with skin components) and a number of in vitro systems have been developed to assess this end point. One such test measures the reduction in electrical resistance across a sample of skin in response to exposure to corrosive substances. The leakage of enzymes such as lactate dehydrogenase into the incubation medium can also be used as a marker of toxic effect. The guinea pig has been the traditional choice for conduct of dermal sensitization studies but, with increasing acceptance of the murine local lymph node assay (LLNA), is set for replacement by mice. There is currently no generally accepted in vitro method of assessing hypersensitivity reactions, as with carcinogenicity it seems probable that no single in vitro test will give a reliable assessment of sensitization and the complex processes involved. For ocular irritation studies, the rabbit is still the in vivo model of choice, although systems such as the chick chorioallantoic membrane (CAM) test or systems using enucleated bovine or chicken eyes can be used to identify severe irritants. The best approach appears to be the use of in vitro systems in a tier of tests that culminates, for chemicals believed to be nonirritant, in the use of a limited number of rabbits. For cosmetics or their ingredients, the development of in vitro methods is a priority because, in Europe, testing these substances in animals is no longer allowed, making the evaluation of new ingredients by traditional methods impossible. STUDY DESIGN AND PARAMETERS MEASURED Dermal Irritation and Corrosion Ethically, this is a contentious area of testing, which has been associated with the general perception of suffering in experimental animals, particularly in the Draize ocular irritation test in rabbits. While it is always unwise to say that past problems are just that, much progress has been made in terms of experimental design and control. The strategy for irritation and corrosion testing has been reﬁned such that these end points can be conﬁrmed in vitro and tests in living animals are restricted. This strategic approach is described in the OECD guideline for acute dermal irritation and corrosion (1) (no. 404, adopted in 2002), which seeks to avoid severe reactions in animals (Box 2). Box 2 A Strategy to Determine Irritation and/or Corrosion The following should be considered before embarking on a test program—the goal being to avoid unwarranted use of animals: r Any existing human or animal data relating to the chemical or related compounds or mixtures. r The presence of structures within the molecule associated with irritation.

Determination: Dermal Toxicity—Sensitization, Irritation, and Corrosion

205

r Physicochemical properties and reactivity. r pH: extremes of pH—⬍2.0 or ⬎11.5—may lead to severe local effects. This should include a review of buffering capacity. r High toxicity following topical application may mean that it is impracticable to examine irritation. r If dermal tests up to the limit dose of 2000 mg/kg have been completed without local effect, speciﬁc testing for irritation may not be necessary; this assumes that the species used was appropriate. r Results of validated in vitro or ex vivo tests for irritation or corrosion; if these are positive, it may be assumed that the substance is irritant or corrosive and in vivo tests are not necessary. r The ﬁnal step is a progressive test in rabbits, in which a single animal is tested, observed, and, if no reaction is seen, further animals are tested up to a maximum of three. If the ﬁrst animal shows evidence of irritation or corrosion, further testing is not required. The guideline indicates that substances that are known to be irritant or corrosive substances and those which are clearly not corrosive or irritant need not be tested in vivo (1).

There is now a good range of in vitro tests for irritation and corrosion. These have been validated by organizations such as the European Centre for the Validation of Alternative Methods (ECVAM) and include assays described in OECD guidelines, for example, the Transcutaneous Electrical Resistance assay (2), the Human Skin Model Test (3), and the in vitro Membrane Barrier Test Method for Skin Corrosion (4). CORROSITEX has also been validated as a test system. There is an extensive literature on these assays and progress in their development has been rapid; in view of this, detailed description of the methods will not be given here and the reader is referred to reviews such as Tornier et al. (5) and various reports by European Centre for the Validation of Alternative Methods. In animals, dermal tests are based on application of the test material to the shaved backs of rabbits for up to 24 hours under an occlusive dressing to prevent ingestion and to maximize the response. Following removal of the dressing, the response is graded at intervals up to 72 hours or until no further response is seen. Erythema, oedema, skin thickening, exfoliation, cracking or ﬁssuring, necrosis and ulceration are assessed and scored relative to control values. Nonirritant substances may then be assessed in an eye irritation test (see below). One of the difﬁculties with animal tests is that assessment of the reactions is subjective, although systems to assess reaction by means of reﬂectance colorimetry or spectroscopy are being introduced. The extent of erythema and oedema are scored separately from 0 (no reaction) to 4 (severe reaction) and the scores used to calculate a Primary Irritation Index. There are several formulae for this but they are generally based on adding the scores together and dividing the totals by the number of test sites and scoring time points. In the EU, the scores for erythema and oedema are treated separately while in other jurisdictions they

A Guide to Practical Toxicology 2nd Edition

206

may be combined. In the EU, the scores are used to produce a classiﬁcation as follows:

0 ⬍2 2 to 5 ⬎5

Nonirritant Slightly irritating Moderately irritating Severely irritating/corrosive

The various procedures are well described and compared in Derelanko and Hollinger (6). OECD guideline 405 (7) gives details of test methods for both dermal and ocular irritation and corrosion. Ocular Irritation Following dermal evaluation, nonirritant substances may be assessed in an eye irritation test, in which 100 mg or 100 ␮l of the test substance are instilled into the conjunctival sac of one eye of one or more rabbits, the other eye being used as a control. Reaction to treatment is observed and scored at appropriate intervals; if intense irritation is seen, the eyes are immediately irrigated to remove the chemical. As for the dermal assessments, only one animal is exposed at a time and reactions are assessed before the next is treated. Ocular irritation studies have been a regular source of controversy over many years and are now moving slowly toward the use of in vitro systems. However, the simplicity of the alternatives counts against them in comparison with the structure and complex processes of the human eye and, as a result, no single test has proven to be an acceptable alternative. The potential for ocular toxicity should be assessed from physicochemical data relating to the chemical and from the results of in vitro screens before animals are used to conﬁrm lack of irritation. It is now generally accepted that if a chemical is shown to be a dermal irritant, then exposure of the eye in vivo is unnecessary. The CAM test has been used as a screen to identify severe irritants before the use of animals. In this test, the response of the blood vessels in the CAM of fertilized chicken eggs is assessed after a brief application of the test chemical. Vasodilation and hemorrhage are scored, in comparison with controls and known irritants, at intervals after washing off the chemical. Scoring is based on the intensity of reaction over time following treatment; this period may be as short as 5 minutes. Other approaches have used excised bovine eyes, quantitative structureactivity relationship (QSAR) assessment, and various proprietary systems. Irritation by Other Routes It should be remembered that irritation is not simply a dermal or ocular phenomenon and that it can play a major role in toxicity studies using other routes,

Determination: Dermal Toxicity—Sensitization, Irritation, and Corrosion

207

including oral and parenteral. Local irritation of the forestomach has been associated with carcinogenicity in long-term rodent studies and irritation of the gastric mucosa may trigger emesis in dogs or nonhuman primates. Venous irritation at the site of administration may limit the dose or duration in parenteral toxicity studies. Inhalation studies in rodents may be associated with irritation in the larynx, which is not necessarily indicative of similar effects in humans. In studies by intranasal instillation, the presence in the formulation of absorption enhancers has been associated with microscopic changes in the nasal epithelium; these may represent a direct effect of the excipient or an exacerbation by treatment of such effects. SENSITIZATION In contrast to irritation and corrosion, little progress has been made in devising credible in vitro tests for sensitization due to the complexity of the processes involved in induction and the subsequent reactions. Although animals have not been replaced, the introduction of the murine LLNA has led to a reduction in the numbers of animals used because previous protocols used large numbers of guinea pigs, whereas a LLNA uses 20 female mice. Allergic Sensitization in Guinea Pigs There is a large number of protocols using guinea pigs, based essentially on two designs: the Buehler test and the maximization test of Magnusson and Kligmann. Both involve dermal treatment of up to 30 guinea pigs at relatively high, irritant doses to achieve sensitization, followed after 14 to 28 days by a challenge at a different site using a nonirritant dose to assess any allergic reaction. The maximization test is a more aggressive test than the Buehler test because the immune response, and the likelihood of sensitization, is enhanced by intradermal injection of the test substance with and without Freund’s adjuvant. In addition, irritants such as sodium lauryl sulphate may be used before the challenge dose in order to induce mild inﬁammation. The main points of the maximization test are summarized in Box 3. Box 3 Sensitization in Guinea Pigs—the Maximization Test OECD guideline 406 (8) gives the main points of this test method as follows: r At least ﬁve control and 10 treated guinea pigs; up to 10 and 20 may be needed if sensitization cannot be proved. r The dose for induction should be mildly to moderately irritant but not systemically toxic. The challenge dose should not be irritant. Treatment: Induction (intradermal injection and/or topical application). r Day 0: each treated animal receives pairs of intradermal injections each of 0.1 ml, given to the clipped shoulder region of as follows: (1) a 1: 1 mixture

A Guide to Practical Toxicology 2nd Edition

208

of adjuvant and physiological saline, (2) test chemical alone, and (3) a 1: 1 mixture of test chemical and adjuvant. Controls receive three pairs of injections as follows: (1) adjuvant and physiological saline, mixed 1: 1; (2) undiluted vehicle; and (3) vehicle and adjuvant mixed 1: 1. r Topical administration is given on day 7 using a ﬁlter paper soaked with test chemical in the vehicle or vehicle alone, for treated and control animals respectively. The paper is applied to the clipped test area and held in place with an occlusive patch for 48 hours. If the chemical is not irritant, the test area is prepared by painting with sodium lauryl sulphate in Vaseline to induce local irritation. Challenge: r Day 21, the ﬂanks of all animals are clipped and the test chemical applied to one ﬂank using a patch or test chamber; the other ﬂank is treated with vehicle only. The patches are left in place for 24 hours and the reactions are scored.

The basic Buehler test uses dermal application of a mildly irritant dose to one ﬂank on two occasions in the sensitization phase followed by a dermal challenge on the other ﬁank up to 4 weeks later. The application site may be occluded by wrapping the animal in a dressing that keeps the site warm and moist. In both tests, response to treatment is assessed by scoring for erythema and oedema 24 and 48 hours following the challenge dose. According to the OECD guideline, a mild-to-moderate sensitizer should give a response of at least 30% in a maximization test or 15% in the Buehler test. This response rate should be checked regularly, using known sensitizers such as hexyl cinnamic aldehyde, mercaptobenzothiazole, or benzocaine. The OECD test guideline 406 (8) gives further details of these methods. Allergic Sensitization in Mice The mouse ear swelling test gives a more quantitative measure than the subjective scoring of the guinea pig tests. Topical application to the abdomen, after preparation by intradermal injection of adjuvant and tape stripping for 4 days, is followed after 10 days by a challenge dose to one ear, using the other ear as a vehicle control. The thickness of the ears is measured at 24 and 48 hours after challenge, a 20% increase over the control ear being taken as a positive result. In the LLNA, sensitization is assessed by incorporation of tritiated thymidine into proliferating lymphocytes in the lymph nodes draining the site of topical application. The LLNA has a number of advantages over the guinea pig protocols, particularly in respect of numbers of animals used and welfare (e.g., no adjuvant is used). The test takes advantage of the primary proliferation of lymphocytes induced in the auricular lymph node following topical application of a sensitizer

Determination: Dermal Toxicity—Sensitization, Irritation, and Corrosion

209

to the ear; the induced proliferation is proportional to the dose applied and to the potency of the sensitizer. The main points of the LLNA are given in Box 4. Box 4 Sensitization in Mice—the LLNA The main points of this test are as follows: r Four groups of ﬁve female CBA/Ca or CBA/J mice. r Control (vehicle) and three concentrations of the test chemical to allow assessment of any dose response. r Topical application to the dorsum of the ears over 3 consecutive days. r Vehicles are listed in the guideline in order of preference: acetone/olive oil (4:1 v/v), dimethylformamide, methyl ethyl ketone, propylene glycol, and dimethyl sulphoxide. Vehicle choice is critical (see text for discussion of this). r On day 6, each animal receives an intravenous dose of tritiated thymidine. r Five hours later the animals are killed; the draining auricular lymph nodes are removed; and the lymph node cells are isolated, washed, and subjected to scintillation counting as a measure of incorporation of tritiated thymidine. r Results are expressed as a stimulation index derived by dividing the counts from test animals by those of the controls. A stimulation index of three or more, in the presence of a dose response, is indicative of a positive result. r An EC3 value can be derived from the data by linear interpolation; this is the concentration of the test substance that is calculated to give an SI value of 3. Source: Adapted from OECD guideline 429 (9). While the test is a considerable improvement over the older protocols using guinea pigs (it gives a quantitative and dose-related response), it is not necessarily seen as a replacement, although that may effectively be the case. It is not infallible and it is possible to induce false positives, which are discussed in the following section. PITFALLS IN IRRITATION AND SENSITIZATION Observation of the reaction to treatment in the guinea pig sensitization and rabbit dermal irritation tests is not fully quantitative and requires a degree of subjective judgment and, by implication, skill and experience in scoring the results. With the gradual adoption of quantitative methods such as the LLNA, this problem is being overcome. However, this test is not infallible and false positives may be produced by irritant chemicals; this may be a problem where the test compound is opaque and obscures local reaction. With the dermal and ocular irritation tests in rabbits, the visible clinical signs are readily scored but clinically relevant signs such as itching, pain, and other

210

A Guide to Practical Toxicology 2nd Edition

invisible effects cannot be assessed other than by inference from the behavior of the animal. McGarry (10) reviewed the LLNA in respect of its use for Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) and reported concerns about the inﬂuence of the vehicle on the proliferation of the lymph node cells, increasing or decreasing it. In addition, she said that concerns have been expressed that the test has not been validated for formulations, such as emulsions, suspensions, and mixtures. She also raises the false positives given by some irritant substances. It is quite clear from the data reported that vehicle can have a profound effect on the results of the LLNA but McGarry points out that this can also be a problem with other test systems for sensitization and in human patch tests. Given the importance of vehicle choice in dermal toxicology, it is not surprising that this should be a signiﬁcant factor in the conduct of the LLNA. However, she concludes that the vehicle may inﬂuence the apparent potency of the sensitizer—that is the concentration at which effects are expressed, may be higher or lower depending on the vehicle used—but the identiﬁcation of hazard is not generally affected. In an analogous way, it is possible that the components of formulations may inﬂuence the responses to sensitizers in the mixture. A further problem with mixtures or formulations is that they are often wholly aqueous and so are not so suitable for use in the LLNA. Irritant substances can produce false positives and this is consistent with the use of the irritant sodium lauryl sulphate to enhance sensitization in the Magnusson-Kligman test. In fact irritants can produce false positives in guinea pigs as well as with the LLNA. Assessment of the presence of irritation may be hampered if the test substance is opaque, as this may obscure the local reaction. McGarry’s excellent review highlights a number of aspects of the introduction of new methods. With the beneﬁts of hindsight, it is evident that the LLNA is going through similar stages of development and understanding as the Ames test. At ﬁrst, the new method is seen as a major step forward; this is usually associated with enthusiasm but experience in the early stages is limited by the inevitably short history of use. The next stage is a cooling period while experience with the new method develops and some shortcomings become evident; the inevitable consequence is that the method is compared unfavorably to the previous techniques which become a gold standard, even if they are associated with the same problems. All methods, new or old, are tools to be used in safety evaluation and like any tool they have strengths and weaknesses; misuse is likely to give a skewed or erroneous result. True utility comes with understanding. The problems encountered with the LLNA are not speciﬁc to it but are found with any test system. The conclusion is that the LLNA is, overall, an improvement on previous systems for sensitization and, in the absence of viable in vitro tests systems of sensitization, will remain the method of choice for the foreseeable future. Although no single in vitro test is likely to replace animal studies, their use will inevitably increase, particularly by the use of batteries of tests to assess the individual processes that make up each overall human end point. It should be noted that if the data from a test are poorly understood, supplementing them with

Determination: Dermal Toxicity—Sensitization, Irritation, and Corrosion

211

more uninterpretable data will not enhance the overall assessment. A plethora of mechanistic work from poorly chosen tests will merely confuse.

REFERENCES 1. OECD. Guidelines for the testing of chemicals (available at http://www.oecd.org): Test No. 404:Acute Dermal Irritation/Corrosion, 2002. 2. Test No. 430. In vitro skin corrosion: Transcutaneous electrical resistance test. 3. Test No. 431. In vitro skin corrosion: Human skin model test. 4. Test No. 435. In vitro membrane barrier test method for skin corrosion. 5. Tornier C, Rosdy M, Maibach HI. In vitro skin irritation testing on reconstituted human epidermis: Reproducibility for 50 chemicals tested with two protocols. Toxicol In Vitro. 2006; 20(4): 401–16. 6. Derelanko MJ, Hollinger MA. Handbook of toxicology. 2nd ed. Boca Raton: Florida, CRC Press, 2002. 7. OECD. Guidelines for the testing of chemicals. (available at http://www.oecd.org/): Test No. 405: Acute eye irritation/corrosion. 8. Test No. 406. Skin sensitisation. 9. Test No. 429. Skin sensitisation: Local lymph node assay, 2002. 10. Helen F, McGarry HF. The murine local lymph node assay: Regulatory and potency considerations under REACH. Toxicology. 2007; 238: 71–89.

9 Determination: Environmental Toxicology and Ecotoxicology

INTRODUCTION The environment may be loosely deﬁned as the surroundings and conditions in which we live; environmental toxicology is the study of toxic chemicals within that environment and the effects that they have on humans and populations. Ecotoxicology is speciﬁcally the study of environmental toxins on the ﬂora and fauna that make up an ecosystem. The former has an implied human slant while the latter is oriented more toward the effects of chemicals on the natural ecosystem studied as a whole, which includes mankind. Evaluation of the impact of individual chemicals on the environment is becoming increasingly important in regulatory terms. While the principle class of chemicals assessed for environmental toxicity has traditionally been agrochemicals (or plant protection products as they are called in Europe). However, there has been a gradual increase in the awareness of the entry of pharmaceuticals into the environment both as a result of treating farm animals and human patients. This expansion of interest is likely to increase briskly with the inception of the European initiative on chemicals, REACH (Registration, Evaluation, Authorisation (and restriction) of Chemicals). This vast piece of legislation lays down data requirements for chemicals, such that the extent of environmental assessment increases as the annual production (or import into the European Union) increases. The data requirements for REACH are covered in chapter 17. Environment assessment is effectively relevant to all chemical products, whether they be agrochemicals, human or veterinary pharmaceuticals, or industrial chemicals. The only group of chemicals or products not caught up in this

213

214

A Guide to Practical Toxicology 2nd Edition

all-embracing net is cosmetics; however, it is likely that the individual ingredients will be registered under REACH and covered there. Furthermore, while the point of entry of a chemical to the environment may be relatively well deﬁned – for instance through spraying a ﬁeld, treating a herd of cattle, or prescribing oral contraceptives to millions of people leading to discharge into the sewage systems of the world—the subsequent distribution of that chemical may be effectively worldwide. Broadly, the more stable a chemical is, the longer it will persist, facilitating distribution to all parts of the world. For instance, bisphenol A and perﬂuorooctanoate have long half-lives and are found worldwide; the problem is that these stable, often lipophilic, molecules can bioaccumulate up the food chain, resulting in disproportionately high concentrations in groups such as marine predators. These high levels have been shown to have signiﬁcant toxicological effects on aspects of the marine mammalian life cycle, particularly reproduction (1). From this discussion, it becomes evident that some environmental exposures arise intentionally and some are unintentional. The impact may be local or, ultimately, global; the effects of release may be expected or unforeseen. For instance, while it may have been predicted that treating cattle with the antiparasitic ivermectin might lead to release of unchanged drug to the local environment, it was not foreseen that it would affect the longevity of cowpats by affecting the viability of the insects that normally remove the dung. Some releases of chemicals to the environment have become apparent after relatively poor regulation of their use combined with a lack of understanding of their potential impact. Thus the insecticide DDT affects the thickness of egg shells in predatory birds and organotin compounds are associated with imposex in dog whelks along shorelines (see below). RELEVANCE OF ENVIRONMENTAL ASSESSMENT TO CHEMICAL DEVELOPMENT There is no escaping from the relevance of environmental toxicology to chemical development in the 21st century. In fact, with the inception of REACH in the European Union, it is likely to become more important, as REACH has extensive requirements for environmental assessment for existing chemicals, which need to be addressed in order to achieve registration. It has to be said, however, that the requirement for assessment may not translate into a need to test, provided adequate justiﬁcation for not doing so can be made. The data to support a nontesting strategy may include proof of lack discharge to the environment and physicochemical data, supported by a thorough literature search. New chemicals will face similar hurdles. While agrochemicals have been subject to environmental assessments for many years, they are relatively novel for pharmaceuticals but are required in both the United States and the European Union. There is increasing awareness of the presence of drugs in the environment and the possible effects that they may have. For example, Zuccato et al. (2) reviewed the presence of pharmaceuticals in the

Determination: Environmental Toxicology and Ecotoxicology

215

environment in Italy, examining the reasons for their presence and their effects. From the literature reviewed it was clear that environmental contamination by pharmaceuticals is widespread. However, the distribution of individual pharmaceuticals in the environment is inﬂuenced by factors such as differences in the disease prevalence, by prescribing habits or market forces. The main sources of contamination are patients or treated animals. To a certain extent, environmental load can be predicted from sales ﬁgures and the rates of metabolism in the target species. Pharmaceuticals are intended to have deﬁned pharmacological actions at low concentrations and so pose potential ecotoxicological threats to the environment and, ultimately to humans. This area of toxicological endeavor is relatively new and is evolving rapidly. As with persistent pesticides, which were misused in the 1960s and 1970s, there has been recent realization of the potential problem; the extent and signiﬁcance of this is gradually becoming apparent. For household products it is inevitable that many will ﬁnd their way into the sewage system and thence into the environment when the sewage has been treated. For some industrial chemicals, deliberate environmental release may be unlikely but it should be borne in mind that accidents cannot be planned and catastrophic releases occur every so often. In some cases, the impending pollution can be predicted, for instance when a retaining system for water discharged from a mine begins to break down and threaten a major river system. In summary, there are few chemical groups for which environmental assessment is not relevant. For most, it is becoming increasingly important. The following discussion looks at some of the basics of environmental toxicology without seeking to be a deﬁnitive text. GENERAL PRINCIPLES OF ENVIRONMENTAL TOXICOLOGY AND ECOTOXICOLOGY One of the keys to environmental toxicology is the behavior of chemicals in the environment, apart from any inherent toxicity. There are similarities between the pharmacokinetic behavior of compounds in ecosystems and their behavior in individual organisms; both are governed by the interaction of the physicochemical characteristics of the chemical with the subject. The overall response is affected by the extent and duration of exposure and by the way the chemical is handled in the subject—in this case the ecosystem. In ecotoxicology the main subjects for studying effects are populations (individual species), biocoenoses (communities of associated species), and whole ecosystems comprising a larger number of species, habitats, and functional features. In contrast to toxicology, where variability is limited to differences within one species or controlled differences in experimental technique, ecotoxicology deals with much greater diversity due to the presence of many species interacting in an essentially uncontrolled manner. These interactions eventually achieve equilibrium in a delicate balance, which is a function of interdependencies between the different components of the ecosystem. Effects on one species or group of species (e.g., insects) can have signiﬁcant

216

A Guide to Practical Toxicology 2nd Edition

effects on a whole ecosystem. Changes in the ecosystem lead to adjustment and re-equilibration, which may have far reaching effects out of proportion to the size of the original change. In the Gaian concept of James Lovelock, the Earth is seen as a single organism which regulates (and heals) itself. There may be truth in this, but on current performance we are outdistancing the reparative processes and are in danger of compromising our own existence; at which point the healing process may begin. POLLUTION, ROUTES OF ENTRY, AND ENVIRONMENTAL ADME There is much heated debate about pollution and what constitutes pollution or a pollutant. A potentially useful deﬁnition of a pollutant is that of a chemical that has exceeded normal background levels and that has the potential to cause harm, always remembering that the potential for harm increases with concentration. Deﬁnitions of pollution refer to noxious chemicals discharged into the environment and it has been suggested by some that pollution started when primitive humans lit the ﬁrst ﬁres. It is probably better to consider pollution as an excessive discharge into the environment that persists or accumulates to the extent that it causes harm. This may be considered on a local or national level as appropriate. Pollution as a result of ﬁres, particularly coal ﬁres, was noted before AD 1500 in London and efforts were made to restrict the use of coal at intervals subsequently, culminating in the clean air acts in the United Kingdom in the second half of the 20th century. For all the furore at the time and subsequently, it is unlikely that these localized and transient episodes of coal ﬁre-induced smog have had any long-term adverse effects on the environment as a whole. Discharge into the environment as a result of industrial activities is easier to deﬁne as harmful in the long term. This would include unintentional discharge from mining reservoirs of water with high levels of heavy metals or other pollutants. These elements are present naturally in the environment but at lower, generally nontoxic concentrations; sudden high levels carry signiﬁcant risk for water supplies, ﬁsheries and ecosystem well-being. In environment or ecotoxicology there are two major aspects for investigation: the environmental fate of a substance, i.e., what happens to a substance once it is introduced into the environment, and the ecological effects on the environment or ecosystem that follow its discharge. In common with general toxicology, there are several routes by which a chemical enters an ecosystem and there are different compartments analogous to the organs in the body of an animal, into which the chemical may be distributed. Following entry to the environment, the fate of a chemical can be described by the processes of ADME (absorption, distribution, metabolism, and elimination) in a broad analogy to similar processes in individual animals. As in animal pharmacokinetics, the chemical may be sequestered into individual compartments; in animals this might be the bone or adipose tissue, in the environment it might be a clay soil. In either case, sudden acceleration of release can result in harmful concentrations.

Determination: Environmental Toxicology and Ecotoxicology

217

The major compartments of the environment may be summarized as water, air, soils, and ﬂora and fauna (wild and domestic). Chemicals enter these via many diverse routes, including (intentionally) agrochemical spraying or illegal discharge, or (unintentionally) as air pollution from industrial ﬁres, smoke stacks or vehicles or as run off into waterways from industrial sites or intensive farms. Many routes are not considered at the evaluation stage and can have had unexpected effects. For example ivermectin, an antiparasitic chemical given to cattle, is excreted in the feces and increases cowpat life by killing the insects responsible for their degradation (3,4). The system into which a chemical is discharged-–air, soil, or water-–is important in determining the signiﬁcance of the discharge and the extent to which it can be distributed through the ecosystem. In terms of distance of transport, the greatest distances are found with air, while water has the greatest capacity for movement in terms of volumes. Discharge into soil will ensure the lowest distance and the lowest volume of transport. While both soil and water have great potential as sinks for pollution, water pollution has the greatest potential to threaten populations due to the ease with which substances are transported. This threat can become global because of the effects of bioaccumulative toxicants on marine mammals (1). As indicated above, clay soils have a high capacity for adsorption of some chemicals, which become tightly bound; as a result, their adverse actions are attenuated. Of course, in time they will be slowly released from the clays into the rest of the ecosystem, giving a prolonged low-level exposure of organisms or a prolonged opportunity for degradation. Peat soils, on the other hand, do not have such adsorptive capacity, a contrast that was noted after the Chernobyl accident. The differences in binding of cesium-137 between the clay soils in the lowlands and the acid peat soils in the hills affected the amounts that were available and this was reﬂected in the radioactive content of crops and livestock. In contrast to organic chemicals, metals—particularly heavy metals—are not degraded and detoxiﬁcation is dependent on their removal, irreversible binding, or dilution. Complex molecules may be broken down and eliminated from the ecosystem at greater or lesser rates according to chemical class. Simple carbon compounds are easily biodegradable but halogenation may well prolong this process into years, as seen with molecules such as the dioxins and organochlorines such as DDT. One important factor to consider in ecotoxicology is the ability of some chemicals to concentrate as they progress up the food chain until concentrations at the higher levels become toxic. This is the effect seen with the organochlorine DDT, long banned from the “developed world.” The long half-life of DDT and its metabolite DDE, due to high lipid solubility and slow metabolism, result in increasing concentrations up the food chain until there is a clear effect, most easily seen in carnivorous birds. In the peregrine falcon, eggshell thickness was diminished with increasing DDT exposure to the extent that breakages in the nest increased and the population declined.

218

A Guide to Practical Toxicology 2nd Edition

The plight of marine mammals highlights the processes and effects of bioaccumulation and the difﬁculties of studying its effects. Marine mammalian toxicology is a discipline which has to cope with a number of challenges that make laboratory-based toxicology in rodents look easy. The subject species range in weight from a few kilos to tens of tons, are widely dispersed, often rare and are found in the largest continuous ecosystem on the planet. This area of toxicology is emerging from its early beginnings of simple analysis of tissues for contaminants into an era where detailed investigation of the effects of such contaminants is being addressed in an increasingly multidisciplinary manner. However, increasing fragmentation into disciplines may mean that it becomes more difﬁcult to achieve a holistic view of marine toxicology (as it does with any other area of toxicology). This is true of marine mammal toxicology per se and of the marine ecosystem as a whole. Marine mammals are a special case in toxicological terms, because they are at the top of the food chain. In addition, they have large blubber reserves, giving them the unlooked-for ability to accumulate lipophilic, persistent compounds such as polychlorinated biphenyls. Consequently, their offspring are subjected to high levels of these compounds from birth through the lipid-rich milk and are possibly predisposed to immunological deﬁciencies, with increased susceptibility to infection and tumours. Another aspect of this area of investigation is the blurring of deﬁnitions that sometimes occurs. For instance, it is quite easy to deﬁne whales as marine mammals as they never come ashore and also some species of seal as marine mammals as they come ashore only to breed. While these groups ﬁt easily into the deﬁnition of “marine mammal,” as does the sea otter, other mammals such as the polar bear and more obviously littoral land-based animals may not be so easily categorized, though they are still subject to a marine environment and its contaminants. Vos et al., whose seminal book formed the basis of these two paragraphs, suggested 20 recommendations as to how this ﬁeld of toxicology should be advanced. These include—as a nearly random choice—the integration of multiple approaches, compilation and dissemination of information, use of surrogate animal models (although if we have trouble justifying the use of a rat to evaluate safety for humans, the same process for safety evaluations for whales is likely to even more fraught), understanding processes linking exposure to effects, and “understanding blubber physiology and estimating total body burdens of lipophilic contaminants.” Although pollution has traditionally been associated with molecular chemistry—solutions, emulsions, or aerosols, for example—or with microscopic particles, it is increasingly evident that larger pieces of waste may be signiﬁcant too. There has been an apparently tacit distinction between litter and pollution. However, with the emergence of plastic as a major source of chemicals such as bisphenol A leaking into the environment from plastic waste it is clear that pollution is not simply at the level of molecules, emulsions, or microscopic particles. For example, albatrosses pick up plastic during their foraging expeditions and regurgitate it into their chicks when they feed them and it is possible for swallowed plastic waste to have fatal consequences in the guts of mammals.

Determination: Environmental Toxicology and Ecotoxicology

219

FACTORS IN TESTING FOR ENVIRONMENTAL EFFECT With the realization that environmental release of chemicals can have far reaching effects, whether of unusually large amounts of endogenous (natural) substances or synthetic chemicals, has come the acceptance of the need for testing for potential adverse effects on the environment. The emphasis on such testing is inevitably on compounds intended for agricultural use as pesticides but there have been initiatives to test pharmaceuticals for their environmental impact and there is a continuing debate about the environmental effects of estrogenic compounds. The problem of testing for ecotoxicity is that the scope for subtle change is much greater than in a single organism or test species and it is impossible to test every aspect of an ecosystem except in very large and complex experiments (“mesocosms” or ﬁeld trials). The objective of ecotoxicity testing is to predict the behavior of a chemical in the ecosystem and to assess the potential for adverse effects in the situations under which it will be released. The major difﬁculty with this objective is the enormous diversity of the environment and the selection of representative test systems. Inherently, one species of ﬁsh cannot be considered to be completely representative of all other ﬁsh. Equally, an aquatic herbivorous invertebrate cannot be representative of an aquatic herbivorous mammal, although both are at the same trophic level in ecological terms. Because bees are not harmed by an agrochemical, it should not be assumed that it will be nontoxic to other less obviously beneﬁcial insects. In any case, what is a “beneﬁcial insect”? It seems probable that in the longer term the ecotoxicological impact of genetically modiﬁed crops could be much more signiﬁcant than their immediate adverse effects on consumers. At this point the extent of or scope for interaction of chemicals and the natural world, of which we are a part, becomes a topic of concern. The precise deﬁnition of ecotoxicity therefore becomes important. Clearly, if there are widespread effects on beneﬁcial (or desirable) insect populations due to insecticidal gene expression in crops, this is a toxic manifestation of the crop and can be classiﬁed as ecotoxicity. Loss of a species is a clear-cut event with imponderable impact; if an effect is limited to a shift in populations of plants or animals due to cross-breeding, it may be more difﬁcult to describe it as toxicity, although such an event may indeed be entirely adverse environmentally. In assessing the potential for environmental effects there are two roughly deﬁnable areas of investigation: those that are dependent on the physicochemical properties of the material that determine environmental fate and those that examine the potential for ecological effects. The ﬁrst has to consider r physicochemical characteristics—partition coefﬁcient (water and oil solubility), adsorption and desorption characteristics, volatility r fate and behavior—relative persistence, liability to abiotic degradation, ﬁnal fate, rate and route of elimination. The potential for ecological effect is investigated via

220

A Guide to Practical Toxicology 2nd Edition

r effects on bacteria and other degrading organisms including assessment of biological oxygen demand r effects on higher organisms, such as bees, earthworms, ﬁsh, and birds, with extrapolation from laboratory species to environmentally relevant organisms. Although such assessments are made before the release of novel chemicals, there is the continuing need for monitoring after sales of the chemical have started. Such studies are the ecological equivalent of epidemiology and have similar weaknesses and uncertainties, unless the effects are unusual and clearly attributable to exposure to the suspect chemical. Thus, the thinning of eggshells in birds of prey was attributed to organochlorine pesticides through a series of ﬁeld and mechanistic studies that together produced a body of evidence that was incontrovertible. The presence in the environment of synthetic estrogens is much more difﬁcult to link to decreased sperm counts in men due to the inherent variability of the data and the different interpretations that are possible. TEST SYSTEMS AND STUDY TYPES FOR ECOTOXICOLOGY Test systems for assessment of ecotoxicology have been chosen on pragmatic grounds in helpless acknowledgment that assessment in every relevant species would be impossible. The following descriptions of test species and study types have been put together with reference to the Organization for Economic Cooperation and Development guidelines (www.oecd.org) and to Principles of Ecotoxicology by Walker et al (5). The intention is to give a ﬂavor of the test species and studies conducted, rather than to attempt a deﬁnitive description. Furthermore, the various tests on algal growth and bacterial degradation are not considered here. In many single-species studies the objective is to determine the LC50 and a no observed effect concentration (NOEC). The LC50—the median lethal concentration—is equivalent to the LD50, seeking to determine the concentration at which 50% of the test system is killed. The concentration concerned may be that in water or in a diet and the values for these measures, particularly with tests conducted in water, are greatly inﬂuenced by the conditions under which the experiments are conducted. There seems to be a lack of standardization of some aspects of these tests—for instance, algae used as feed or in the characterization of important test components such as artiﬁcial soils. These may lead to deﬁciencies in trace elements or to other test parameters that have an unsuspected inﬂuence on the test data. It is probable that this situation will improve over time with development of knowledge in these areas but, in the mean time, it is equally good to be aware of the possibility of these problems and the difﬁculty caused in data interpretation, particularly when comparing data between laboratories. The majority of tests are single-species experiments, conducted in isolation; there is a brief discussion on mesocosm studies at the end of this section. Study designs are given in the appropriate guidelines.

Determination: Environmental Toxicology and Ecotoxicology

221

Ecotoxicology In Vitro As would be expected there is a continuous effort to develop in vitro tests that have relevance to ecotoxicology. It would not be possible or sensible to review the whole ﬁeld of in vitro ecotoxicology here; the following small selection is intended to illustrate the breadth of test systems being employed. As with other areas of in vitro toxicology, this ﬁeld is dogged by the obvious differences between the responses in the laboratory of a cell line derived from a target species and those of the complete organism in the environment. Segner (6) reviewed the use of cytotoxicity assays with ﬁsh cells as an alternative to acute lethality tests with ﬁsh and indicated that the concentration of chemical that would result in 50% mortality in ﬁsh in 96 hours (the LC50 value) in vivo could not be predicted from the values determined in vitro. The use of cell lines from relevant organisms is a recurrent theme but suffers the same disadvantages as the use of mammalian cell lines in other branches of toxicological assessment. The range of endpoints studied has similarities to those of other in vitro tests too, with parameters such as neutral red exclusion and enzyme leakage into the culture medium playing a signiﬁcant role. A promising approach might be to use a battery of tests to assess the potential for ecotoxicity, as used by Zurita et al. (7) in an evaluation of diethanolamine, which is widely used as an intermediate and as a surfactant in cosmetics, pharmaceuticals, and agrochemicals. This investigation used systems representative of four trophic levels and included bacterial bioluminescence in Vibrio ﬁscheri, algal growth inhibition in Chlorella vulgaris, and immobilization of Daphnia magna. A hepatoma ﬁsh cell line was used to study a range of endpoints. The ﬁsh cell line was the least sensitive of these systems, while D. magna and V. ﬁscheri were the most sensitive. The authors concluded that diethanolamine was not expected to produce acute toxic effects in the aquatic environment. This seems to be backed up by acute toxicity data in ﬁsh and invertebrates (albeit somewhat elderly and variable) listed in the IUCLID chemical data sheet available on the European Chemicals Bureau Web site (http://ecb.jrc.it/). However, the authors hedged their bets by suggesting that chronic or synergistic effects with other chemicals were possible. This caution neatly encapsulates the ecotoxicological dilemma of testing a single species in the presence of single chemical, while isolating both from environmental reality. Unsurprisingly, the most complete organism, D. magna, was the most successful in these tests, underlying the general rule of thumb that the more complex the test system, the more likely is it to be successful as a predictive tool. In this vein, the frog embryo teratogenesis assay using Xenopus, has long been used in reproductive studies, though not at a regulatory level. Hoke et al. (8) looked at the utility of this assay in ecological risk assessments. However, they indicated that this assay was relatively insensitive in comparison with acute toxicity data from tests with traditional aquatic test systems or with other amphibians.

222

A Guide to Practical Toxicology 2nd Edition

Invertebrates D. magna are tested to assess effects on mobility and reproduction. In the immobilization test the percentage of Daphnia that are not swimming after 24 or 48 hours is assessed for each concentration of test chemical. For the reproductive test, young Daphnia, less than 24 hours old, are used and the total number of offspring produced by each animal that survives the test is assessed against the controls. The clone of Daphnia that is used is important as there are differences in sensitivity, which make comparison between experiments difﬁcult. The algae used to feed the Daphnia can have an important effect on the test results and, in the absence of standardization, it may be difﬁcult to compare results between laboratories. Earthworms are studied by exposure to test chemicals in containers of artiﬁcial soil, with an assessment of mortality 7 and 14 days after application; at least two concentrations—one with mortality and one without—are examined, with appropriate controls. Experiments may include an assessment of reproduction, which has been found to be a more sensitive marker of effect in some cases. Another experimental procedure exposes the worms to the test material on moist ﬁlter paper. Bees (used for agrochemicals only) are subject to acute oral and contact tests. Oral toxicity is assessed by feeding the bees with different concentrations of the test chemical, with mortality checks up to 48 hours. Contact toxicity is assessed by direct application to the thorax, which can also be used with other insects. Other invertebrates that can be used in test programs include woodlice, springtails, and marine arthropods from sediments, such as those found in estuaries and other areas with high pollution loading. Vertebrates Various species of ﬁsh are used, including rainbow trout, fathead minnow, zebraﬁsh, and bluegill sunﬁsh (for the U.S. EPA). Tests may be static (where the water is unchanged for the duration of the test), semi-static (the water is changed at intervals), or ﬂow through where the water is changed constantly. The duration of exposure is generally for up to 14 days, although shorter exposures are used to determine the LC50. Birds such as quail, mallard duck, pheasant, or partridge are used in a variety of tests, including dietary tests, which may use ﬁve test diets with increasing test substance concentration over a 5-day period. A 3-day off-treatment period follows. The majority of these test systems are used in single-species studies in which the classic toxicological design of controls and several treatment groups are examined, usually with the added dimension of time as a factor. Mesocosms and Field Tests and Studies Single-species testing is, in some ways, analogous to in vitro toxicity test systems in that only a part of the ecosystem or animal is being examined and interrelationships

Determination: Environmental Toxicology and Ecotoxicology

223

between species or organs cannot be easily predicted. The problem of singlespecies testing can be partially circumvented by the use of mesocosms or ﬁeld tests. While a mesocosm is an artiﬁcial ecosystem of a manageable and controllable size, ﬁeld tests use pre-existing areas in the environment for studies with chemicals such as pesticides or to determine the causes of observed environmental effects. The latter is analogous to an epidemiological study in humans. As always with toxicological investigation, size and complexity are associated with signiﬁcant cost and these experiments or investigations are inevitably expensive and time consuming. Mesocosms are large-scale experiments that attempt to reproduce a section of the ecosytem in miniature, usually including a pond or water system such as an artiﬁcial stream. The use of “miniature” in this context is deceptive, however, because these may have a volume of 50 m3 or greater, with a surface area of up to 25 m2 . The advantage of both these test types is that they have a number of different species, which can interact in a way similar to that in the real world. A mesocosm is constructed, in an appropriate container, according to the experimental duration and objective; longer experiments need larger systems. The components of the system and their origins and quantities are deﬁned in guidelines (e.g., those from the Organization for Economic Cooperation and Development). All components, such as the sediment (with indigenous fauna and ﬂora), ﬁsh species, plankton and plants, are carefully characterized and sourced so as to be free from confounding contaminants. Before addition of the test chemical, the system is allowed to equilibrate and mature, the duration of this being proportional to the size of system. Experimental duration is inﬂuenced by the type of chemical being tested, persistent chemicals requiring longer examination than those that are readily eliminated by biotransformation or degradation. Several mesocosms may be set up to examine different doses of the test chemical, in which case the reproducibility of the system becomes critical to interpretation of the data. Field tests, by deﬁnition, do not use “constructed” locations but the experimental parameters are still carefully deﬁned before the test is undertaken. The areas covered by ﬁeld tests may be substantially larger than with mesocosm experiments and are typically performed for pesticides, which may be applied at doses expected to be toxic. Measurements made are dependent on the chemical class, habitat, type of agricultural system, and application method. They include determination of persistence of the chemical in soils, water, and in the ﬂora and fauna, including an estimation of any bioaccumulation risk. Study of population change in response to the application is an important aspect of these trials. Changes in population that are noted independently of ﬁeld tests are the trigger for ﬁeld studies. The difference between a study and a test being that no chemical is deliberately applied in a study. As with an epidemiological study, the object is to determine the cause of an observed difference from expectation. Such studies depend on the initial observation—development of male sex organs in female dog whelks or declining reproductive performance in seals—and the painstaking investigations that follow. These include precise deﬁnition of the

224

A Guide to Practical Toxicology 2nd Edition

problem and analysis to determine the presence or not of abnormal chemical residues such as organic tin compounds or polychlorinated biphenyls, either in the affected species or in their environment. The relationship between the effect and the proposed cause is usually only accepted on provision of a credible toxicological mechanism of effect or an incontrovertible association that is not present in other locations. Frequently, as in many other walks of life, a strong or circumstantial association between a chemical and an effect is not enough to offer “proof” to authorities, especially if money is involved in rectiﬁcation, either directly in cleanup costs or in increased costs for a proﬁtable industry. There is evidence that morphological change, resulting from pollution, may be counteracted by natural selective forces. Thus, populations of the peppered moth, Biston betularia, responded to carbon deposits on trees by increased proportions of a darker variant, the incidence of which has declined with declining carbon-based pollution. Similarly there has been evidence that the development of male sex organs in female dog whelks (imposex, which hinders reproduction) is being circumvented through selective pressures. These population responses are apparently based on existing genetic diversity in the normal population and it seems unlikely that this type of adaptive response to morphological change would be readily duplicated in the case of biochemical effects on basic molecular function. An important aspect of ﬁeld studies is the use of biochemical or morphological markers of effect to assess exposure. These may be easy to assess, as in the presence of imposex in female dog whelks exposed to organic tin compounds, or more challenging as in the analysis of carcases for chemical residues. Classic markers have included the thinning of eggshells in peregrine falcons, which was the mechanistic response to exposure to DDT and its major metabolite DDE. The routine monitoring of marker species can also be used in the assessment or development of local pollution. Increased metabolic capacity in the livers of river trout may imply exposure to excess concentrations of xenobiotics. Such hypotheses may be conﬁrmed by analysis and this could be extended to the carcases of predatory birds or mammals such as herons or seals. These are markers of effect and the distinction must be drawn between the presence of a chemical and its effects on individual species and its impact on the ecosystem as whole. To determine the impact of a chemical, it is necessary to carry out detailed population studies. Crucially, it is important to know what the population distribution was before the pollution occurred or to know the situation in an identical area in which no pollution has (yet) taken place. ENVIRONMENTAL ASSESSMENT OF AGROCHEMICALS Although environmental studies are now a part of pharmaceutical development, they were ﬁrst conceived for agrochemicals and have reached a state of considerable reﬁnement. While pharmaceuticals may be expected to reach the wider environment indirectly through the sewage system or, occasionally, by accidental

Determination: Environmental Toxicology and Ecotoxicology

225

spillage into a river or water course, pesticides are deliberately applied to large areas of the outdoors and so have much wider environmental access and potential ecotoxicological effects. The studies (often termed Fate and Behavior studies) conducted are aimed at determining the fate of a chemical in the environment in terms of distribution, degradation (and mechanisms), and elimination from the ecosystem; this process is broadly analogous to the ADME studies conducted for pharmaceuticals. Any indication that a chemical will persist unduly in the environment is a ﬂag for more extensive (and expensive) studies and more difﬁcult justiﬁcation of its use. Predicted environmental concentrations (PECs) are calculated and persistence is assessed; degradation products are assessed to ensure that they do not have any adverse effects that add to those of the parent compound. The PECs for parent and degradation products are used to assess exposure of nontarget species in soil and water, potential contamination of drinking water or groundwater, and potential effects in crops which follow on from the treated crop. The environmental distribution and breakdown of pesticides are dependent on factors such as the physicochemical characteristics of the chemical, the climate and weather conditions at the time of and following its use and how it is used. As for a drug, the degradation can be described by a half-life, dependent on adsorption to soil, solubility, and breakdown by organisms such as bacteria. An indication of the mobility of a pesticide—how easy it is to elute it from soil—can be gained from the adsorption coefﬁcient (KOC) value, which gives a measure of adsorption afﬁnity to soil. Mobility and degradation of pesticides differ between soils and is inﬂuenced by temperature and the amount of water in the soil. The concentration of a pesticide in the environment is dependent on the rate of application, the frequency of use, and the pattern of usage and these have to be taken into account in the overall assessment. Potential toxicity to wildlife is assessed by standardized laboratory tests using non-target organisms such as birds, bees and other insects, and ﬁsh and aquatic invertebrates; effects on environmental bacteria are also assessed. Values for LD50 and LC50 are derived together with NOELs and NOECs and these are compared with the PECs. The overall goal is an indication of the overall toxicity of the material compared with the PECs to get an estimate of toxicity set against likely exposure levels. Internationally agreed trigger values are used by the European Commission to decide whether the risk is acceptable or not. While some of the studies are laboratory based and relatively easy to control, some are much larger and based outside in prepared containers or in the ﬁeld. The container studies include microcosm and mesocosm studies; other studies may make use of artiﬁcial streams. Ultimately, one of the species that could be exposed to pesticides or other agrochemicals is man and it would seem sensible to obtain some information on the absorption, distribution, metabolism, and elimination of these substances in human volunteers. There has been much debate about the ethics of human studies with agrochemicals and, at the time of writing, there is considerable resistance to

226

A Guide to Practical Toxicology 2nd Edition

this, even to the extent of not using data when it has been generated. This does not seem to be entirely sensible. However, the recent advent of microdosing studies used for pharmaceuticals, where very small doses of radiolabeled compound are given to volunteers may be relevant to agrochemical development. The use of small doses is consistent with normal expected exposure to pesticides and it seems likely that these studies with their complex and expensive analytical techniques will prove to be more easily justiﬁable for low doses of pesticides than for pharmaceuticals, which are usually given at much higher doses than those studied in such experiments. ENVIRONMENTAL ASSESSMENT OF PHARMACEUTICALS Depending on the region of interest and the type of substance there may also be a requirement to evaluate the environmental impact of pharmaceuticals. Certain classes of compound are exempted from this, including vitamins, peptides or proteins, carbohydrates, vaccines, or herbal products on the basis that they are unlikely to pose any signiﬁcant environmental risk. In Europe this is a two-phase procedure, in which the ﬁrst estimates the environmental exposure to the drug and the second assesses fate and effects in the environment. The estimation of environmental exposure undertaken in phase I is based entirely on the drug itself rather than on any metabolites or taking route of administration into account; it is also assumed that the major route of entry to surface water will be via the sewage system. Data relating to the dose per patient, the percent market penetration (to give an idea of how many people will use it), the amount of waste water per person, and the dilution are used to produce a PEC for surface water. If this falls below 0.01 ␮g/L for surface water and there are no other environmental concerns, it is assumed that there will be no risk to the environment if the drug is prescribed as expected. Substances which are potential endocrine disrupters are persistent or highly lipophilic may need to be assessed in any case. The second phase of the assessment is started if the PEC for surface water is more than 0.01 ␮g/L, This phase is itself in two tiers, A and B, in which a ﬁrst base set of studies in conducted to assess aquatic toxicology and fate and, if indicated, a second tier in which more detailed study of emission, fate, and effects is conducted. The ﬁrst part of Tier A is to look at the fate and physicochemical properties of the drug; this includes an assessment of biodegradability and the sorption behavior of the drug which is described by the KOC deﬁned as the ratio between the concentration of the substance in sewage sludge or sediment and the concentration in the aqueous phase at equilibrium. A substance with a high KOC, retained in a sewage treatment plant, may reach the terrestrial compartment via spreading of sewage sludge. The aquatic effect studies of Tier A include long-term toxicity in Daphnia sp., ﬁsh, and algae to predict a concentration at which effects are not expected; this is the predicted no effect concentration, which is derived from no observed effect concentrations (NOEC) determined in the various studies. The

Determination: Environmental Toxicology and Ecotoxicology

227

ratio between the PEC and the predicted NOEC is evaluated, and if this is less than 1, further testing in the aquatic compartment is not necessary. If this ratio is above 1, further testing in Tier B is needed. This phase includes investigation of sediment effects and effects on microorganisms. The concentration of the drug in the terrestrial compartment is calculated unless the KOC is greater than 10,000 L/kg. For veterinary pharmaceuticals, the guideline places emphasis on veterinary medicinal products that will be used in food producing animals that may not be individual treatments but may, for example, be used for treating a whole herd or ﬂock. A tacit assumption is made that a substance that is extensively metabolized will not enter the environment. Separate consideration is given to substances used in the aquatic environment, which may enter the wider aquatic environment and those in terrestrial situations. Questions asked in the guideline include one about antiparasitic compounds, which may be a reaction in part to the environmental effects of ivermectin; antiparasitic agents—but not those acting against protozoans—advance automatically to phase II. If the concentration at which the product enters the aquatic environment is calculated to be less than 1 ␮g/L or the PECsoil is expected to be less than 100 ␮g/kg, environmental evaluation of the product may stop at phase I. Phase II provides recommendations for standard datasets and conditions for determining whether more information should be generated for a given veterinary pharmaceutical. The tests are broadly similar to those indicated for human pharmaceuticals with appropriate adjustment for aquatic and terrestrial compartments. Animals that are reared in intensive conditions and those on pasture are given separate consideration, as are aquatic animals. The end process is calculation of the appropriate PECs followed by a risk assessment of the environmental impact. PITFALLS IN ENVIRONMENTAL TOXICOLOGY The principal problem of ecotoxicology is the simplicity of the test systems relative to the complexity of the ecosystems and the multifactorial nature of many of the possible adverse variations that may occur. Although the test systems may be good models for individual components of the ecosystem, the speciﬁc tests may not be predictive for ecological effects in the target species or groups when they are removed from the relative simplicity of a laboratory environment. Furthermore, it is extremely difﬁcult to assess the signiﬁcance of change seen in a laboratory environment and to predict effects in the whole ecosystem. The most complex ecotoxicological experiments attempt to reproduce entire ecosystems in miniature and to examine the reactions of components of this artiﬁcial system to the controlled introduction of the chemical. The principal difﬁculty with this type of test, apart from the eye-watering expense, is that with increasing experimental complexity it becomes much more difﬁcult to control the many variables. Although an artiﬁcial stream is probably a good reproduction of

228

A Guide to Practical Toxicology 2nd Edition

an ecosystem in miniature, it cannot reproduce the wider picture of the whole ecosystem. A further factor is the likelihood of effects that are attributable to unconsidered relationships, for example the effect of ivermectin on the degradation of dung from treated cattle. Although this type of effect might be predicted by lateral thinking, rigidly regulated testing and data assessment do not readily lend themselves to such thought processes. The interrelationships and co-dependencies inherent in the ecosystem are not easily assessed a priori but, with the beneﬁts of hindsight, become painfully predictable when the effects are ﬁrst noticed. Extrapolating laboratory change—will an effect on one species signiﬁcantly affect the whole ecosystem?—is fraught with difﬁculty.

REFERENCES 1. Vos JG, Bossart GD, Fournier M, et al. Toxicology of marine mammals. London: Taylor & Francis, 2003. 2. Zuccato E, Castiglioni S, Fanelli R, et al. Pharmaceuticals in the environment in Italy: Causes, occurrence, effects and control. Environ Sci Pollut Res Int 2006; 13(1):15–21. 3. Wall R, Strong L. Environmental consequences of treating cattle with the antiparasitic drug ivermectin. Nature (London) 1987; 327(6121):418–421. 4. Madsen M, Nielsen BO, Holter P, et al. Treating cattle with ivermectin: Effects on the fauna and decomposition of dung pats. J Appl Ecol 1990; 27(1):1–15. 5. Walker CH, Hopkins SP, Silby RM, et al. Principles of ecotoxicology, 2nd ed. London: Taylor & Francis, 2001. 6. Segner H. Cytotoxicity assays with ﬁsh cells as an alternative to the acute lethality test with ﬁsh. Altern Lab Anim 2004; 32(4):375–382. 7. Zurita JL, Repetto G, Jos A, et al. Ecotoxicological evaluation of diethanolamine using a battery of microbiotests. Toxicol In Vitro 2005; 19(7):879–886. 8. Hoke RA, Ankley GT. Application of frog embryo teratogenesis assay-Xenopus to ecological risk assessment. Environ Toxicol Chem 2005; 24(10):2677–2690.

10 Interpretation: Basic Principles

INTRODUCTION The intention of this chapter is to give guidelines on the basic principles of interpretation of toxicological data and to indicate an overall philosophy to this sometimes seemingly black art. Interpretation is distinct from prediction, for example, in attribution of cause/effect before versus after the event: “She smokes a lot, so she may get lung cancer” versus the ﬁnding that she has lung cancer. Did she smoke? Yes, 20 a day. We have a possible contributing factor for this cancer. The most basic object of interpretation is to assess the signiﬁcance of difference, once it has been established that there is a difference to explain. The questions to be asked include “Is there a difference?” and if there is, how has it arisen. Does an observed difference mean toxicity? Equally, if no difference is discernible, where one was expected, why has it not been detected? Were the methods used sensitive enough to show difference? Has exposure been achieved or is the lack of effect due to a true lack of toxicity? Is the lack of toxicity relevant to other species? When the data are clear in showing an effect of exposure, there is usually little debate about the results and, with appropriate supporting studies, the mechanism is also generally accepted. However, the differences, especially in epidemiological studies, are often small, conﬁned to one group or species and have no clear origin or mechanism. In these circumstances, it is quite possible for conﬂicting interpretations to be put forward for the same set of data. Furthermore, additional studies may serve simply to produce contradictory results and are often performed to protocols that are not directly comparable with earlier work. The net result is that the data from the various studies cannot simply be combined to give a larger population size (and so more statistical power). The outcome is a body of data that is almost impossible to negotiate without falling foul of one group or another and conclusions are left hanging. 229

230

A Guide to Practical Toxicology 2nd Edition

The Interpretation Challenge The main challenges for toxicological interpretation, which are of clear relevance to the public (the ultimate customer of toxicological investigation), include the causes of cancer (threat to the individual), reproductive effects (threat to the children), and general disease and debilitation which can result in loss of quality of life or shortened lifespan. The public perception of risk and its assessment are dealt with in chapter 11, but it is clear that public interest can put enormous pressure on the process of interpretation and may exert an undue inﬂuence on the end result. This is a particular problem when any degree of urgency exists, especially if more studies have to be conducted; it is all too easy in these circumstances to arrive at a conclusion, based on insufﬁcient data, which is at best misleading or simply wrong. Frequently, the task of interpretation is made more difﬁcult by the lack of clarity of cause and effect. For any ﬁnding that has a signiﬁcant normal incidence in the general population, asthma for example, attribution of a set of cases to a speciﬁc cause can be tenuous. Unequivocal demonstration of cause and effect is possible only if there is a clear relationship between exposure to an agent and a condition present at a signiﬁcantly higher incidence than normal. For this reason, minor increases in conditions that may be due to toxicity are extremely difﬁcult to ascribe with certainty to individual chemicals or classes of chemicals. This leads to contradictory epidemiological studies that cause opinion to veer from one side to the other, in a manner that does nothing to help scientiﬁc credibility.

The Scope of Interpretation Data presented for toxicological interpretation ranges from the results of individual toxicity tests or whole data packages, or large epidemiological investigations to a single data point from an occupational monitoring scheme. The complexity of interpretation increases as the number of measurements and the amount of data increase. One of the interpretative tricks with large multiendpoint data sets is to group of the data together into easily deﬁnable sets so that the conclusions can be better focused on the mechanism in operation. The complexity of a full clinical pathology data set for an individual in a health screen (perhaps 20 to 30 parameters) may be contrasted with the same type of data for a study in animals where there may be 40 to 50 parameters for 30 or more animals. With both sets of data, it is not sensible to try to interpret each parameter separately because links between functional groups of analytes or hematological cell counts may be lost in the maze of increases and decreases and uncertain abnormalities. In these circumstances, one data point that is seen to be abnormal may be supported by other abnormalities or may be dismissed because there are no other supporting variations from normality. Equally, the changes seen at various exposure levels may be contrasted with those seen in other groups or in other members of the same group.

Interpretation: Basic Principles

231

Interpretation as a Dynamic Process Interpretation is not a static process and it is quite likely that new data will at least inﬂuence previous perceptions, if only to conﬁrm them. As a toxicological program of testing or research develops, it should be possible to build up a picture from individual studies and to deﬁne extra studies to be undertaken in the light of these data. From the conclusions of the individual studies, the wider picture of the effects and mechanisms emerges, allowing overall conclusions on the activity, mechanism, and hazard posed by the test chemical. This in turn facilitates assessment of workplace risk, clinical dosing information, clinical treatment of overdose, acceptable daily intakes, or harvesting intervals (time to harvest from last spraying or treatment). Appropriate interpretation may also suggest better practice, for example, improvements in food storage in the light of Balkan endemic nephropathy, in which the presence of ochratoxins, produced by moulds in poorly stored food, was implicated in progressive renal toxicity and failure. There is often pressure to attempt interpretation of part data sets, for instance, part way through a long study or in the middle of an ongoing program of investigation. This should be performed with caution and in the clear understanding that data that follow on may invalidate the interim assessment. It is in this type of circumstance that interpretation of environmental disasters often comes adrift, leading initially to the wrong conclusions or inappropriate investigative studies. STEPS IN INTERPRETATION It is not sensible to set hard and fast rules for interpretation, as these are too readily disproved by exceptions, however, as the chapter develops the general principles that should be applied to interpretation will emerge. These include the following, whatever the size of the data set: r Assess the validity of the data. r Look at all the validated evidence. r Deﬁne the controls or baselines. r Decide what evidence of exposure is available. r Examine the mechanism proposed in support of the attribution. When these have been adequately addressed it may be possible to draw a conclusion as to cause and effect. Failing this, it should be possible to deﬁne further studies that should be conducted to elucidate the effects seen. Study Design The ﬁrst step is to assess the study design to ensure consistency with the study objectives and good practice. Part of this should be to look for procedural oddities (or deviations from protocol) that might inﬂuence the data. For instance, food consumption can be distorted by difﬁculties in recording discarded food or the practice of giving supplements, which may not be recorded quantitatively. From

232

A Guide to Practical Toxicology 2nd Edition

this base, the credibility of the data has to be assessed by review of the methods for factors such as sampling error, faulty procedure, or design. One such bias is found when more samples are assessed from treated groups in comparison with the controls, leading to an apparent treatment-related difference that is purely a product of sampling frequency. A critical aspect of study design is the choice of dose or inclusion levels, as overload may lead to unrepresentative toxicity. This is particularly true in studies where the chemical is mixed with the diet, as high inclusion levels may have an effect on the nutritional value of the food offered. The comparators used also need to be examined, as the use of the wrong ones will invalidate the study. Thus, when trying to demonstrate similarity, old should not be compared with young, smokers with nonsmokers, uranium miners with ofﬁce workers, etc. Controls and Expectation One of the precepts of toxicology is the detection of adverse change from normality and the controls in any experiment give a baseline of experimental normality against which all the treated groups or individual experimental units are assessed. It is therefore critical to be assured that the controls are, in fact, normal as described in chapter 2. Given that the numbers in any toxicity study will be merely a sample of a much larger population, it is inevitable that there will be a degree of normal biological variation between control groups in different experiments. Some of these variations will be extreme and this can lead to apparent difference that is not biologically real. When confronted with an apparent treatment-related difference from controls the assessment should seek to indicate if the treated group values are simply higher than the controls or have they been increased as a direct inﬂuence of the test substance. Box 1 summarizes the questions that need to be asked. The presence of a dose response is a particularly important criterion in assigning a difference to treatment, while the presence of differences in associated parameters also lends weight to the argument for causal relationship with the test substance. To a degree, the size of a difference determines its reproducibility, as small differences seen in small studies are notoriously difﬁcult to reproduce. The presence of the effect in similar studies or mechanistic evidence from related data would also support a relationship to treatment. The inﬂuence of data treatment procedures on the perception of difference cannot be ignored, especially when the only difference is statistical; appropriate data treatment may eliminate difference. The critical question relates to the appropriateness of the controls and whether they were within expectation for the parameter under analysis; in other words, were they normal? Choice of appropriate controls is particularly critical in epidemiological studies where confounding factors or poor differential diagnosis can invalidate a study. In toxicological studies the choice of controls is easier as the experimental population is usually supplied as a uniform set of individuals that can be randomly separated into control and treated groups. In this case, you can

Interpretation: Basic Principles

233

Box 1 Conﬁrmation of the Validity of the Control Data The validity of the data from the controls in any experiment should be critically examined to conﬁrm that they represent expectation or normality. Invalid controls call the whole experiment into question. The following should be considered: r Were the controls experimentally appropriate and within the limits of expectation? r If there is more than one control group, are the data consistent between controls or positive controls and treated groups? r Have the data been distorted by procedurally related stress or, in animals, by the presence of an observer? r Is only one parameter affected? r How large is the difference? r Is the difference reproducible or consistently present in other data or studies? r Has the difference arisen through the way the data has been processed? r When the validity of control data is checked against historical controls, is the comparison valid?

be conﬁdent that the controls and treated groups have similar starting baselines. However, due to the presence of normal biological variation, especially with small group sizes, differences between the groups can be reasonably expected before treatment starts. At this point it becomes useful, essential in some cases, to have historical control data to hand to assess where the control and treatment group values lie in relation to expectation.

USE OF BACKGROUND DATA IN INTERPRETATION There will come a point in the examination of toxicological data when it must be decided whether an unexpected observation is natural or an unexpected difference is a change from normality. The contemporary study control should always be the ﬁrst and chief comparator in any toxicity study. However, as indicated above, there is a role to be played in interpretation of toxicological data by focused use of historical control data. These data should be used to indicate if the controls have strayed from expectation and to back up the concept of normality; they should not replace the contemporary control. Only when the intention of an experiment, often an early or sighting study, is to look for gross differences from normal, should historical data be used to indicate normality in the absence of study controls. Provided the controls are selected from the same population as the treated groups, it is possible to be conﬁdent that they are truly comparable with them. With historical control data, care has to be exercised that this is true. The greater the similarity of the historical control individuals with those in the study with

234

A Guide to Practical Toxicology 2nd Edition

which they are being compared, the greater will be the conﬁdence that can be placed in using them to support interpretation. The criteria that should be checked before historical control data are used in a particular study include (see chapter 2 for more discussion of these points.): r Strain r Route of exposure r Age of test system r Media or vehicle r Supplier r Contemporaneous data r Husbandry or storage r Study procedure The greater the deviation of the historical control parameters from the study test system, the less relevant they will be to the interpretation of that experiment. Inappropriate use of historical control data is one of the easiest errors to make, especially if there appears to be no reasonable alternative. In fact, if there are no comparable historical control data, it is probably better to avoid their use entirely. It may be possible to use historical data from other laboratories but this carries risks, which should not be ignored. Although the strain and age may be similar, the care of the test system and other factors such as environment, instrument settings, and so on may be sufﬁciently different to produce data that are not directly comparable. Such data may be used as a guide in the initial setting up of an assay but are of dubious use thereafter. This is illustrated by historical tumour incidences in rodents, which are available from suppliers. The problem here is that the data are compiled from studies conducted in different laboratories under undeﬁned husbandry conditions. Differences in diagnosis and nomenclature used by the individual pathologists are also a confounding factor. It is therefore not possible to place much conﬁdence in these data, but they are better than nothing and may be useful in discussing the incidences of rare tumours. In general, the less reproducible the test conditions, the less useful will be the historical control data from other laboratories. There are some cases where use of historic control data is routine. Positive control data from previous studies are used routinely in the local lymph node assay, for instance. For these studies, it is accepted that repetition of a positive control with every study is not necessary and that inclusion of a positive control group every few months gives adequate assurance that the test system is responding as expected. These historic data validate the test system and response. STATISTICS AND SIGNIFICANCE IN TOXICOLOGY Statistics has come in for much criticism over the years, starting with Disraeli, supposedly quoting Mark Twain: “There are three kinds of lies; lies, damned lies, and statistics,” Mark Twain was also supposed to have said “First, get the

Interpretation: Basic Principles

235

facts, then you can distort them at your leisure.” Churchill added to this by saying that “The only statistics you can trust are those you falsiﬁed yourself” and that “Statistics is the art of never having to say you’re wrong.” Statistics is revered among some toxicologists who see it as the ﬁnal arbiter of difference and, by implication, biological signiﬁcance, ignoring the fact that it is a tool that can be (and often is) misused. Statistics is too often used as an unstoppable force that drives interpretation, rather than as an assistant to this delicate process. Having said that, knowledge of statistical methods and their application is integral to toxicology. The following does not intend to be a deﬁnitive description of method but an introduction to the ﬁeld. Statistical analysis is routine in sufﬁciently sized toxicity studies and the results can be slavishly reported to the general detriment of credibility. It is important, however, to remember that statistics is a fallible tool. A useful analogy is comparison of the use of statistics by toxicologists to the use of a lamppost by a drunk; they should be a source of illumination not of support. It is easy to misuse them and to draw incorrect conclusions based solely on the presence of statistically signiﬁcant differences. In simplistic terms there are three levels of signiﬁcance that are important in toxicology, namely statistical, biological and toxicological, or clinical, in increasing order of importance. Data should be analyzed with these signiﬁcance levels in mind, taking into consideration any dose response (or its absence), the inherent variability or variance of the data being examined and the sample size. Variance is a function of the range of the values (minimum to maximum) and of the deviation of the individual values from the mean and indicates the extent to which the values are distributed about the mean. Variance increases when the data includes outliers, data points that are radically different from the majority of the group. Remember that high variation in a treatment group may be due to differences in response to treatment among individuals and not to normal biological variation. It is normal statistical practice to exclude outlying results from analyses. This is usually acceptable in control groups but may be more difﬁcult in a treated group. If there is a single high value for a single parameter in a high-dose animal that is not supported by other results, it is probable that the single data point is an outlier and can be excluded. If a whole range of parameters is distorted from normality, another cause should be sought—for instance, extreme change induced before death. These data may be excluded from statistical analyses but may still be related to treatment. Statistical signiﬁcance means simply that the test group is different from controls in a numerical sense and that the difference in means is large enough for the effects of variance to be overcome. This can be numerically ridiculous and a disaster in presentation terms; computer programs often work on unrounded ﬁgures but report to one or two decimal places. This means that it is possible for a table to contain four group means for one parameter from different treatment groups, all with a value of 1.1 but with signiﬁcant differences ﬂagged for one or more; this is also often a reﬂection of the differences in variance in the data for

236

A Guide to Practical Toxicology 2nd Edition

each group. Equally, it must be pointed out that a difference that is not statistically signiﬁcant may still be of biological signiﬁcance. Likewise, a statistically signiﬁcant difference is not always of biological signiﬁcance, when it relates to a change that may be important for the animal but that is not necessarily adverse and that is probably reversible. Examples of this would include normal hepatic adaptation to treatment, possibly seen as a minimal hepatocellular hypertrophy or an increase in urine volume due to increased water intake after administration of a foul-tasting substance. Transient diuresis of pharmacological origin without other change would also be included, if it was not seen to excess. Cessation of treatment or exposure is associated with a speedy return to normality. Biological signiﬁcance does not equate to toxicological signiﬁcance, especially as most data are representative of a single time point and do not analyze a continuum, which might show an increasing difference attributable to treatment. However, it should be noted that if a biological difference is allowed to persist, it may result in toxicity; a difference of biological signiﬁcance, seen in short studies, may progress to toxicity in longer studies or over the course of a development program. Toxicological signiﬁcance denotes change, which, if allowed to persist, may impact the survival or well-being of the exposed population or test system. Although reversibility may mean that an adverse change is not of toxicological signiﬁcance, the degree of change is important; for example, administration of carbon tetrachloride to rats can result in extensive liver damage, which is clearly the result of toxicity. This damage is clearly evident in the ﬁrst few days following treatment but, due to the liver’s powers of recuperation, there may be no difference from normality after 14 days. Tumour data provide examples of the distinction between these levels of signiﬁcance. A doubling of the incidence of a rare tumour over control incidences, if seen at the highest dose level, may not be statistically signiﬁcant but would probably be considered to be of biological signiﬁcance, if not of toxicological signiﬁcance, depending on context. Equally, a 25% difference from control in testicular tumour count in some strains of rat may be ﬂagged as statistically significant, but is unlikely to be of biological or toxicological signiﬁcance, especially if signiﬁcant difference is established against only one control group or at the low- or intermediate-dose level. Toxicologists seem to be fond of an overall threshold of signiﬁcance set arbitrarily at 10%; a difference of less than 10% relative to controls is not signiﬁcant, a sort of numerical comfort blanket, which has the beneﬁt that it is well accepted but with little scientiﬁc basis. A 10% increase in plasma activity for an aminotransferase is unlikely to be of any biological signiﬁcance, whereas a 10% difference in plasma sodium concentration could be seriously unwelcome. This distinction is due to the low physiological impact of variability in enzyme activities versus the more precise requirement for electrolyte concentrations. This might cause closer examination of the statement, frequently used in toxicology reports, that “as the difference from controls was less than 10%, it was not considered to be of toxicological signiﬁcance.” Having raised that caution, it

Interpretation: Basic Principles

237

should be said also that the 10% level is a useful, if arbitrary threshold and that larger values should be used with care. At the simplest level, the use of statistics merely examines the differences between control and treated groups and gives a probability that the two groups represent different populations. In other words, they test the null hypothesis that there is no difference between control and the treated group(s). The results of statistical analysis can therefore be used to answer the question “Is the difference from controls caused by treatment or exposure to the suspected factor?” Note that it generally only indicates the answer and does not provide it, unequivocally, in every case. All too often a single statistically signiﬁcant difference will not be enough to prove the wider hypothesis, particularly if the sample size is small or there is wide variation among the individual data points. The smaller the sample size and the greater the variance in the data, the more unreliable will be the statistical values that result from any analysis. For sample sizes of less than 10 or where the variance is large, a statistical signiﬁcance is only a pointer to a difference that may be of biological or toxicological signiﬁcance. It is the responsibility of the toxicologist to interpret the data to indicate the real signiﬁcance of the difference, in biological or toxicological terms. At all times, it should be remembered that statistics are blind in that they are solely a numerical tool and can tell you nothing about the quality of the numbers or their origins; if they are used without discrimination, they are a blunt tool that can be a source of misinformation and erroneous conclusions. Statistical Process In analyzing data, it is important to use the statistical tests that are appropriate to the data type being examined, whether it is for a continuous variable or presence/absence data. The following is intended to show the approach normally taken in analysis of these data types and is intended simply as a guide to statistical method. For more technical explanation, one of the texts in the bibliography should be consulted but, having said that, it is extremely difﬁcult to ﬁnd an explanation of statistical method that is accessible to the mathematically challenged. For a continuous variable, the ﬁrst line of examination is at the level of group means and, usually, the standard deviation, which, in conjunction with the number of data points, n, gives a ﬁrst indication of the variance of the data. Table 1 (1) illustrates the effects of variability on the summary statistics (mean and standard deviation) for a representative set of data. The “normal” set has been constructed to represent typical values for an enzyme such as alanine aminotransferase. The second – variable – set is a reworking of the ﬁrst to introduce greater variability, while the third set illustrates the effect of a single outlying value. The summary data give a ﬁrst, crude indication of difference, assessed from the control and test group means and the overlap of their standard deviations. This has been described as the “very obvious test,” it has a pleasing simplicity, which is a bonus to many but may be frowned on by professional statisticians. There are two approaches to the analysis of continuously variable data, namely

A Guide to Practical Toxicology 2nd Edition

238

Table 1 The Effect of Variability in Data on Summary Statistics Data point

“Normal” data

Variable data

With an outlier

1 2 3 4 5 6 7 8 9 10 Range Coefﬁcient of variation Mean SD

31 29 27 34 32 29 28 31 33 30 27–34 7.3%

36 24 25 36 42 19 36 23 33 30 19–42 24.7%

31 29 27 34 32 63 28 31 33 30 27–63 30.9%

30 2.2

30 7.4

34 10.5

Abbreviation: SD, standard deviation. Source: Adapted from Ref. 1.

parametric and nonparametric methods, the latter generally having less power than the former. Parametric analysis is the method of choice but for this, the data should be normally distributed and have homogeneous variance. The ﬁrst step in statistical analysis of a data set is to conﬁrm that the variance is homogeneous and, if so, to proceed to analysis of variance and other parametric methods. If the variance is possibly affected by the presence of outlying data points, it may be useful to perform the analysis with and without these values. Analysis of variance uses the data from all groups and seeks to establish that the null hypothesis is true—that there are no differences among the groups—or that one or more groups are different. Although much used in the past, Student’s t test is now acknowledged to be unsuitable where there is more than one group. Where it has been decided that parametric analysis is not appropriate, nonparametric methods offer an alternative, although they are not easily applicable to complex data sets. They are mostly based on ranking the data and are particularly good when there is obvious deviation from the normal distribution but become more difﬁcult when there are a number of tied values. The Wilcoxon rank sum or Mann–Whitney test is the simplest of these methods and is based on assessment of the ranks of the individual values, not on the original data themselves. The Kruskal– Wallis test is the equivalent of analysis of variance, used when there are more than two groups for comparison. This process is summarized in Figure 1 (1,2). Data that describe presence or absence are generally assessed using chisquared or Fisher’s exact test with more complex analysis being undertaken with tests for positive trend. The chi-squared test is appropriate for high-frequency ﬁndings and compares the observed with the expected frequencies, the latter

Interpretation: Basic Principles

239

Are the data normally distributed?

Yes; use parametric analysis

Yes

No; use a simple transformation. Check for outliers.

Are the data normal now?

Are the data homogenous (variance)? Exclude outliers Yes

No

Use parametric analysis

Use nonparametric analysis

Analysis of variance (Anova). If this shows significance go to Dunnet's or multiple t-test. Student's t-test can be used where there are only 2 groups.

2 groups: Wilcoxon rank sum 3 or more groups: Kruskal–Wallis test; if this is significant, use an adjusted Wilcoxon.

Figure 1 Statistical process for continuous data. Source: Adapted from Ref. 1, 2.

being derived from all the data for the groups being tested. For data with lower incidences, Fisher’s exact test is normally used, comparing the numbers of animals in each group with the lesion and those without it. In carcinogenicity bioassays, where analysis of tumour incidence is a vital component of the interpretation of the results, tests for positive trend are used. Cancer is more prevalent in older animals and, as a result of early death due to toxicity, the animals at the high dose will not have the opportunity to express the same numbers of tumours as the controls. Where treatment causes an increased incidence of a tumour in animals that survive to old age, this will not be apparent if there is signiﬁcant early mortality. Analysis is therefore conducted using the data from all the dose groups and takes account of the numbers of animals that die during the study. In addition, the tumours are categorized for each animal as fatal, probably fatal, probably incidental, or incidental; an additional category of uncertain may be added.

240

A Guide to Practical Toxicology 2nd Edition

Data Treatment and Transformation In analyzing data, it is often useful to treat it in various ways in order to make differences easier to discern. One approach to this is to examine change rather than the original value. The classic example is analysis of bodyweight gain rather than the simple group mean data for the absolute weights. This can also be applied to parameters such as alkaline phosphatase, which should decrease with age; the absence of decrease may indicate treatment-related effect. In young rodents, food consumption may be readily correlated with growth by the calculation of food conversion ratios—in effect, the amount of body mass produced for each gram of food consumed. This ﬁgure declines as the growth phase is completed and becomes meaningless after that, as food consumption is maintained at the same values without signiﬁcant gain in bodyweight. For parametric analysis, it is necessary to have normally distributed data. With skewed data, it may be possible to achieve this by transforming the data, for instance, by using the log or square root of each data point, which can also be used where variability increases with the mean. More esoteric procedures, such as use of reciprocals or trigonometric functions start to show a degree of numerical desperation, indicating that the use of nonparametric methods would probably be better.

ASSESSING EXPOSURE Toxicological effect is always related, directly or indirectly, to exposure to an active molecule or to an agent such as radiation. Assessment of exposure is therefore essential to interpretation of toxicological data because, although the presence of an effect indicates exposure, exposure cannot be assumed in the absence of effect. In addition, the presence of an effect does not necessarily mean that it can be attributed to the chemical under investigation. Box 2 looks at some of the factors to be considered in assessing exposure. The normal sequence of known chemical exposure resulting in an effect may be turned on its head when an effect is observed without an obvious explanation. In this case, the interpretation effort relies on ﬁnding common exposure factors and conﬁrming that these are consistent with the observations. There have been many incidents or ﬁndings that have provoked such epidemiological study, including scrotal cancer in chimney sweeps due to soot, lung cancer and smoking, and more recent cases such as the Spanish toxic oil syndrome and eosinophilia-myalgia syndrome. The last two, which had clinical features in common, related to contamination of rapeseed oil (canola) and tryptophan, respectively. Both were associated with widespread malaise among the exposed populations and with a number of deaths. In the case of toxic oil syndrome, the effects were traced to rapeseed oil contaminated with aniline to make it unsuitable for human use. The investigation of the incident was partly hampered by the policy of giving money for returned oil, which resulted in the handing in of numerous spurious samples.

Interpretation: Basic Principles

241

Box 2 Questions in Assessment of Exposure Exposure, and its signiﬁcance, should be assessed via the following considerations: r Was the test system exposed to the test material or a metabolite? A particur r r r r

r r r r

late material may not be available to cells in vitro and an oral dose may not be absorbed. Was toxicity due to a metabolite or an indirect effect (e.g., hormonal imbalance)? Did this exposure extend to the target tissue? Was the target tissue exposed to greater concentrations than elsewhere in the test system? In a life of mixtures, if there was exposure, was this the cause of the effect? Was the observed exposure sufﬁcient to cause the observed effects? “Sufﬁcient” may be deﬁned from no effect levels in previous studies; also consider any interspecies differences. Sufﬁcient includes duration of exposure (area under the curve as well as treatment period). In absence of toxicity, was the exposure medium or vehicle appropriate to achieve exposure of the test system? Is the analytical method sufﬁciently sensitive and speciﬁc to detect the test substance or its derivatives? If a marker is used as a surrogate for the test chemical, is this speciﬁc and reproducible? Was there any cross-contamination of the controls that might invalidate the data?

Eosinophilia-myalgia syndrome was eventually associated with the ingestion of products containing contaminated tryptophan, the contamination resulting from changes in production, including new production bacteria and reduced ﬁltration steps. The causative agents for these incidents have not been deﬁnitively identiﬁed, although candidate molecules and mechanisms have been proposed. Evidence of exposure to the test substance is almost always achieved by analysis of samples taken from the medium in vitro or of blood or urine samples taken from animals. Occasionally, it is possible to point to effects seen and conclude that the test system must have been exposed, but this does not characterize the concentrations associated with the effect or if the parent molecule was present. Toxicokinetic analysis of blood samples gives an indication of basic kinetic parameters including half-life and area under the concentration curve (AUC). Integration of Exposure Information For the reasons given above, integration of exposure data into toxicological assessments is essential for a meaningful interpretation of the results. In assessing the

242

A Guide to Practical Toxicology 2nd Edition

Table 2 Selected ADME Factors and their Impact on Toxicity Long half-life Short half-life High binding to plasma proteins

Tissue binding

Metabolism

First pass effect

Enterohepatic recirculation

Excretion failure or decline

Concentration in tissues of elimination

Longer systemic exposure and possibility of accumulation with repeated dosing. Transient peaks of high concentration that may not elicit chronic toxicity. Low free concentration of active substance in plasma. Small changes in binding site availability may lead to large percentage changes in free chemical and so to toxicity; e.g., warfarin. Sequestration into a tissue compartment, such as bone or lipid, reduces the amount of chemical available to express toxicity. Sudden release later on may have serious consequences. Can increase or decrease toxicity. Inhibition or induction of the enzymes or metabolism can have a marked effect on the toxicity of chemicals; simultaneous exposure to two or more chemicals may therefore have a much greater effect than an equivalent dose of either chemical alone. Signiﬁcant metabolism of a chemical as it passes through the liver for the ﬁrst time after absorption from the gut results in low systemic availability reducing toxicity in more distant tissues. Break down in the gut of conjugate metabolites excreted in the bile can lead to reabsorption, effectively increasing half-life and area under the curve. Age-related decline in renal or hepatic function can lead to increased systemic exposure and hence to toxicity, e.g., benoxaprofen in elderly patients. Concentrations of chemicals in tissues responsible for their excretion can result in local toxicity, seen particularly in the distal tube of the renal nephron and in the bladder.

Source: Adapted from Ref. 1.

likelihood of exposure, the physicochemical properties of the molecule should be considered, including partition coefﬁcient, solubility, and absorption, distribution, metabolism, and elimination (ADME) [Table 2 (1)], as these will have a profound inﬂuence on the extent of exposure. The speed and extent of absorption and subsequent distribution into the test system are also critical. These factors determine the maximum concentration of the test chemical at the site where toxicity may be expressed, whether that is a protein or cellular organelle in a cell culture or in a tissue in a whole animal. Toxicity is usually seen once a threshold concentration or level of exposure to the test chemical or a metabolite has been exceeded. Systemically, this threshold may be associated with a particular level of exposure, deﬁned by Cmax (maximum plasma concentration) or AUC. With some toxicities, especially those relating to transient excess pharmacological action, it is possible

Interpretation: Basic Principles

243

to relate the onset, duration, and severity of effect to Cmax . Where there is a long half-life of elimination, such that signiﬁcant concentrations remain at the time of the next dose administration, it is likely that the chemical or its metabolites will accumulate. This can result in the appearance of toxicity at a late stage in the evaluation program, due to accumulation of effect. For instance, a 4-week study may show no effects, whereas the same dose levels in a 13-week study may be associated with minimal onset of toxicity just outside normal biological limits. In longer studies, this may progress to the extent that development must be stopped. Although systemic concentrations of a parent compound are useful as a general indicator of exposure, they do not necessarily equate to concentration of the active molecule at the site of action. Brief excursions into toxic concentrations may only be associated with transient effects, such as those associated with excess or undesirable pharmacological action. The expression of chronic or persistent change is probably due to accumulation of effect (or deﬁcient repair) following brief toxic concentrations or to sustained exposure to a concentration at which adverse change becomes apparent more slowly. This type of toxicity was apparent with the retinal effects associated with chloroquine, which has a high afﬁnity for melanin in the retina. These irreversible effects are dependent not only on daily dose and duration of treatment but also on the total dose taken; toxicity may be expressed after withdrawal of the drug as the drug persists long after therapy is ceased. However, toxic effect is not always directly attributable to the chemical that was added to the culture or given to the animals. Following administration, and simultaneously with absorption and distribution, the processes of elimination begin. These encompass metabolism and excretion, which are generally expected to result in the removal of toxic entities but which can increase toxicity. One route of removal from the plasma, that is properly part of distribution, is the sequestering of chemicals into tissues where they are retained, effectively inactive, until released. For instance, highly lipophilic compounds, such as DDT and DDE, accumulate in adipose tissue from which they may be released to produce toxicity long after exposure has ceased. This can be a problem in pregnancy when signiﬁcant lipid mobilization occurs during the third trimester. Another example is the binding of heavy metals, like cadmium, to metalloproteins and the subsequent toxicity when a storage threshold is exceeded. Although, having demonstrated exposure of the test system, it is relatively simple to correlate change with the presence of the chemical or a metabolite or an indirect effect, the absence of effect needs considerable care in interpretation. Before a chemical can be truly said to be nontoxic, it is necessary to show that it was available to the test system and that signiﬁcant concentrations at potential target sites were achieved. Incubation at high concentrations or oral administration of large doses does not mean that exposure was achieved. Poor absorption following oral administration (low bioavailability) is a frequent ﬁnding, resulting in low systemic concentrations; as a result the toxicity of a parenterally administered

244

A Guide to Practical Toxicology 2nd Edition

chemical may be much greater than expected when effects are extrapolated from an oral dose. Poor availability may be due simply to the medium or vehicle in which the chemical was offered to the test system, and a change in this can result in signiﬁcantly greater toxicity. The assessment of exposure is dependent on the sensitivity and speciﬁcity of the methods used to detect the test substance. For small molecules this is usually not a problem; for larger molecules such as peptides or proteins, the analytical challenges become more exacting, especially if the half-life is short or the concentrations very low. This leaves the problem of how to interpret the presence of effect in the absence of measurable exposure. There are a number of possible explanations for this, including analytical methods that are not sufﬁciently sensitive. Another possibility might be that the correct matrix is not being analyzed and that the correct place of analysis is the target site of activity. There is also the possibility that the pharmacological effect persists for longer than indicated by plasma concentrations due to persistent binding at a receptor. Although it might be assumed that parenteral administration, in humans or animals, would result in rapid exposure to 100% of the given dose, this may not always be the case. Intravenous administration of an inappropriate formulation may lead to temporary deposition near the site of injection, perhaps as a result of local irritation or other damage. Equally, intramuscular dosing of a poorly isotonic formulation may result in slow release from the site of administration. These uncertainties pale into insigniﬁcance when the dynamics of oral dosing are considered. Before the compound can get into the systemic circulation, it has to cross the gut wall and pass through the liver without signiﬁcant metabolism taking place in a “ﬁrst pass” effect. Excretion of conjugated metabolites in the bile can be associated with enterohepatic recirculation, where the conjugate is broken down in the gut and the active molecule is reabsorbed. This is the mechanism that makes dogs so sensitive to nonsteroidal anti-inﬂammatory drugs. Although the processes of ADME are clearly important in animals, it should be borne in mind that their absence in vitro may have an adverse effect on the results, leading to false-negatives or false-positives. Although this criticism is met to a certain extent by the use of S9 mix, it may be necessary to use a preparation from a relevant tissue, such as the kidney. The toxicity of S9 to cell cultures is well known and should also be considered. Toxicokinetics In the context of toxicity studies undertaken for registration of chemicals, toxicokinetics is an integral part of the process, in terms of conﬁrmation of exposure and of interpretation of the data. The following can only scratch the surface of this fascinating area of toxicology. The parameters calculated from the results of the bioanalysis are given in Table 3 (1). Clearance is a key concept; if hepatic clearance of a chemical is 60 L/hr and hepatic blood ﬂow is 90 L/hr, the implication is that two-thirds of the chemical is

Interpretation: Basic Principles

245

Table 3 Toxicokinetic Parameters Parameter

Comments

Compartment

A hypothetical volume or space in which test chemical may be distributed or retained. Typically, the blood is one compartment; other tissues may form other discrete compartments—bone, adipose tissue, liver etc. Distribution and retention in a particular compartment may affect toxicity; sudden release from adipose tissue in which long term storage of the chemical has taken place may elicit toxicity. The percentage of a chemical that is available to the systemic circulation following oral dosing, usually in comparison with plasma concentrations following intravenous dosing. Calculated from the dose given and the AUCs found after oral and intravenous doses. The maximum concentration of the test chemical or a metabolite, usually in plasma, after dosing. The time at which Cmax is reached. Area under the concentration curve, usually AUC(0–24) or AUC(0−∞) ; a measure of systemic exposure related to half-life and plasma concentration. Increasing the AUC, e.g., through formulation changes, may result in greater toxicity. The apparent volume of the body occupied by the chemical. The total amount of chemical in the body is divided by the plasma concentration at Cmax . For chemicals that are quickly distributed to other tissues, it is possible for the volume of distribution to exceed the body volume. A low volume of distribution may imply little distribution outside the blood. This describes the efﬁciency of elimination of a compound from the blood or a tissue compartment or the body as a whole. Deﬁned as the volume of blood cleared of chemical in liters per hour or milliliter per minute. Total clearance is the sum of the clearance values from all the compartments in the body. The half-life of elimination (t1/2 ) is the time needed for the plasma concentration of the chemical to decrease by 50%; it is dependent on volume of distribution and clearance and is calculated as t1/2 = (0.693 × V d ) divided by clearance.

Bioavailability

Cmax Tmax AUC

Volume of distribution (V d )

Clearance (Cl)

Half-life

removed by hepatic metabolism in one pass—an example of ﬁrst-pass metabolism for chemicals given orally. Although half-life has been used traditionally as a key pharmacokinetic measure, partly because it is simple in concept, it needs to be used with some understanding of its derivation. As it is calculated from the volume of distribution and the clearance, it is dependent on these two parameters. However, it is still a useful concept; in general, a long half-life is likely to be associated with accumulation of the test chemical on repeated administration.

246

A Guide to Practical Toxicology 2nd Edition

Accumulation of test chemical over the period of a repeat dose toxicity study is quite common and this may be accompanied by progressively accumulating toxic effect. This accumulation may be dose related, given that pharmacokinetic behavior at high doses may well be different from those at low or clinical doses. At high doses, absorption from the gut may become saturated or be limited by formulation; in addition, metabolism pathways may be saturated resulting in higher AUC, slower clearance, and longer half-life. Pharmacokinetics at low doses relevant to human exposure may be signiﬁcantly different from those seen at high doses, and it is possible that toxicity expressed at high dose would be irrelevant to humans, due to nonrepresentative pharmacokinetics, in relation to those seen at low doses. There are numerous factors that inﬂuence the kinetics of xenobiotics and their absorption, distribution, metabolism, and elimination (ADME). Formulation can be critical, as indicated above; simply micronizing an insoluble chemical given orally may increase absorption. The type of molecule is also important, for instance, antisense oligonucleotides may be very rapidly distributed to the tissues, meaning that their systemic presence is brief and at barely detectable levels. Slowly metabolized compounds, such as dioxins or organochlorine insecticides like DDT may accumulate in lipid tissues and have half-lives in years. In these circumstances, the traditional method of assessing exposure in the plasma is not useful; the unchanged chemical may well be present in the target tissues at toxic concentrations but cannot be detected by usual methods. A biomarker of effect may be useful in these cases or a biopsy and analysis of an appropriate tissue. For some chemicals, metabolism is rapid and may result in metabolites that are pharmacologically active or toxic. These metabolites can have different pharmacokinetics from the parent molecule. Add to this the potential for some chemicals to induce (or inhibit) their own metabolism, and it becomes evident that interpretation of toxicokinetics should not be attempted in isolation from other information on the chemical, including data from specialist ADME studies, histopathology (induction of metabolism in the liver is often accompanied by hypertrophy of the hepatocytes), and any available information on human pharmacokinetics. THE REALITY OF DIFFERENCE—THE INTERPRETATION OF SMALL DIFFERENCES Toxicology for regulatory purposes is largely about the desire to demonstrate the presence or (preferably) absence of difference from “normality,” and all interpretational effort is directed at this deceptively simple objective. It is relatively easy to spot differences so large that they are barndoor obvious—a 10-fold increase in colony count or enzyme activity or an unusual pathological lesion. Differences of medium size are also relatively simple, they are consistent or outside the normal limits or there is a clear dose response. The real challenge is provided by the small differences, often at the lowest dose level. Small differences may be hugely signiﬁcant, not for their short-term effects but because they may perturb normal physiology or homeostasis by a small amount that has an increasing effect with its

Interpretation: Basic Principles

247

continued presence. Hormonal change is a classic example of this; it is interesting to note that these are not routinely investigated in toxicity studies. One of the reasons for looking for difference is the perceived obligation to show toxicity at one dose and thereby imply safety at a lower one. This leads to pressures to assign signiﬁcance or otherwise to trivial differences; we must show toxicity so this is a signiﬁcant toxicological change. Or we must show a no observed effect level (NOEL), so this small difference at the bottom end of the dose–response curve is irrelevant. Although it has been pointed out that, to demonstrate a NOEL there must be effects at higher doses, this edges towards irrelevance when the doses are vastly higher than those expected in humans. Where there is a small difference at the lowest dose level, which is supported by increasing differences at higher doses, it cannot be escaped that treatment has probably had an effect (or at least an “inﬂuence”) at the lowest dose. The signiﬁcance of this difference is where interpretation becomes more complex. The no adverse effect level (NOAEL) is a useful concept because it acknowledges the presence of treatment-related change while putting it into perspective. The problem is that difference from controls, which is inevitable when using biological systems, is open to misinterpretation unless it is barndoor obvious, as shown by the very obvious test referred to above. For small differences it is difﬁcult to assign signiﬁcance. Having noted a difference from controls, the ﬁrst question to ask is whether there is a dose response. For example, if treated animals are different from controls, is this within background data ranges? It is noticeable that increases or decreases are often present in treated animals and are dismissed as being “within normal ranges.” It is quite possible for a 5% difference in a biochemical parameter to fall inside normal limits and still be treatment-induced, especially if it comes at the bottom of a dose–response curve where the parameter is progressively and clearly affected at higher doses. Such differences show an inﬂuence by treatment but are often not biologically signiﬁcant at the time of observation. A degree of difference is inevitable as a result of normal biological variation within the limits of normality deﬁned by contemporary controls or similar, independent studies. Any pressure to downgrade a difference by deﬁning limits after the event should be resisted. Although differences due to normal variation are expected, it is reasonable to expect some change in the test system when administering pharmacologically active chemicals at relatively high doses. Where there is a classic dose–response curve, interpretation is relatively simple. With U-shaped dose responses, it is not so easy; the ﬁrst problem being to demonstrate that the curve is in fact abnormal, with maximal or minimal effect at intermediate doses rather than at the extremes; vitamin A shows such a curve. Having said that, where there is a difference from controls that is not obviously on a dose–response curve, it is usually easy to dismiss it as being due to chance variation within normal limits. Other reasons for dismissing a difference are that it is present in only one sex (although in rodents, this is often not sensible due to metabolic differences), or within background data, or inconsistent between examinations. The statement that it is of “equivocal signiﬁcance” simply means that it may be related to treatment but is not understood. Sometimes the signiﬁcance of minor

248

A Guide to Practical Toxicology 2nd Edition

differences seen in early studies becomes apparent with prolonged treatment, when lack of biological signiﬁcance can be replaced by clear toxicological effect. A 10% deﬁcit or increase may not be signiﬁcant at 4 weeks but may become fatal if age-related decline in function is accelerated during prolonged treatment. Differences become impossible to interpret satisfactorily when the data, or the mechanism which generates them, are not understood completely. There is, apparently, a touching, unstated, belief, that more data on more parameters will mean better safety evaluation; this is a fallacy. A single difference from controls does not necessarily mean that the function of the tissue or organ system is impaired in proportion to the difference, as compensating mechanisms exist that cope with change in one direction by regulating in another. The overall goal of evaluating a range of parameters is to look at the function, which is the product of many processes that work together. Thus, liver and kidney functions are examined in a range of tests in the course of routine toxicity studies and changes in individual parameters are assessed against the data for related measures of organ toxicity. With increasing severity of effect on, say the liver, the number of parameters affected and the size of difference from controls increases, usually with dose. At the low end of the dose–response curve, at or near the NOAEL or NOEL, increasing the number of parameters to be examined may actually confuse the situation because normal biological variation will ensure a selection of differences in both directions, making secure interpretation nearly impossible. There is a hint of this in the increasing emphasis on immunotoxicology in pharmaceutical development and the enthusiasm for technically demanding methods that generate numbers in the absence of clear understanding of their biological signiﬁcance. As an example of a single parameter test, sister chromatid exchange went through a phase of popularity. It was agreed that there was a clear correlation between positive results and mutagenicity, as indicated by other tests, but the mechanism and signiﬁcance of the effect were not understood and it did not become a standard test for regulatory purposes. As a single endpoint it was never interpreted in isolation from other genotoxicity data. There is also a tendency to react to human toxicity with new test requirements. One example of this is the severe cardiac events linked to QT interval prolongation in people taking drugs such as cisapride. Once again the question must be asked where the threshold of difference for rejection lies. A more general, philosophical question could ask if a one-size-ﬁts-all approach to this type of problem is scientiﬁcally valid. THE REPRODUCIBILITY OF DIFFERENCE Ultimately there is only one way of conﬁrming the signiﬁcance of a small difference and that is to see if it is reproducible, either in a second experiment (as for in vitro tests) or in the next, usually longer, toxicity study. Furthermore, if the second experiment is performed using slightly different methods, the reproducibility or otherwise of the difference becomes much more signiﬁcant. For experiments that are inherently weak statistically—those with small group sizes or with incomplete

Interpretation: Basic Principles

249

data sets—it is not unknown for a second test to show up a different set of statistically signiﬁcant differences from controls. In this case, it is easy to write off the differences as being due to normal biological variation; this illustrates neatly the importance of considering statistical versus biological or toxicological significance. Small group sizes, combined with measurement of parameters that have large inherent variances, will tend to throw up statistically signiﬁcant differences that disappear on repetition. While it is easy to live with nonreproducibility in small differences, it is more complex when larger; apparently toxic differences are not reproduced in successive studies. The potential reasons for this include those in Box 2, chapter 3, to which should be added any changes in study design that may have taken place. Another consideration is that toxicity may be expressed early in a study but, due to development of tolerance or adaptation to treatment, will not be evident later on. OVERVIEW OF INTERPRETATION In attempting interpretation of any data set, the following questions are among those that should be answered: r Are the data a true reﬂection of the methods used, taking the test system characteristics into account? r Have the controls or other baseline comparator performed as expected? r What evidence of exposure is available? r Are the data more variable than usual, particularly in treated groups? r Have the data been affected by any processing? r Were the statistical analyses appropriate and decided before the study was started? r Statistical analysis is a blind tool that says nothing about the quality of the data or their origins; they should be used with care and discrimination. r Is there a dose response? r Is there a NOEL or a NOAEL? r Is there a plausible mechanism that could explain the differences? All the data should be considered in reaching a conclusion; there is little sense in reviewing one parameter in isolation as true treatment-related difference is usually supported by change in several parameters. This concept of linkage is discussed in the next chapter.

REFERENCES 1. Woolley A. A Guide to Practical Toxicology, 1st ed. London: Taylor & Francis, 2003. 2. Dickens A, Robinson J. “Statistical approaches”. In. Evans GO, ed. Animal Clinical Chemistry—A Primer for Toxicologists. London: Taylor & Francis, 1996.

11 Interpretation: Different Data Types

The following sections give an overview of the types of toxicological data and attempt a basic guide on how to approach each type. Unfortunately, although a guide can be attempted, it is most unlikely to cover every set of circumstances. INDIVIDUAL DATA SETS The simplest type of data that may be considered to be toxicological relates to a single parameter for one individual, such as a marker for occupational exposure. This may be presented as a single time point or a series of time points, which give a chronological proﬁle of exposure. With this type of data, it is important to be sure that the marker is either a direct marker of exposure or a surrogate marker such as an easily measured effect. In general, the more remote the analyte or effect from the parent compound or the greater the natural background incidence or concentration, the more difﬁcult it is to draw supportable conclusions from the data unless they are clearly at the extremities of or outside the normal range. The best marker of exposure is the parent compound, a known metabolite or by-product. However, use of these is often not possible and an indirect marker of effect such as inhibition of cholinesterase activity in the plasma following exposure to organophosphate insecticides can be used. Although it is possible to analyze urine or plasma for DNA adducts, these are not necessarily speciﬁc and may reﬂect lifestyle or other exposures. A more general approach is to look at clinical pathology data, which rarely looks at a single parameter in isolation, as a guide to abnormality that may be work related. With any such data set, which is unlikely to have contemporary controls unless part of a full epidemiological study, it is important to have access to robust, trustworthy historical data ranges. If there is any sample analysis for the individual from before the start of exposure, this is clearly a signiﬁcant advantage, 251

252

A Guide to Practical Toxicology 2nd Edition

although the date and circumstances in which the sample was taken should be considered. It is also probable that such data will be available for other workers and can be combined to give an overview of the exposed population. Within this data set, it may also be possible to identify subsets of individuals who have been subject to greater or lesser exposure depending on their workstation. For chemicals that are accumulated into tissues and released slowly, assessment of exposure may be difﬁcult during the early stages, as the effects only become apparent when a concentration threshold is crossed. For instance, cadmium has a half-life measured in decades and accumulates in the kidney until a critical concentration of around 200 ␮g/g is reached. At this point, cadmium toxicity becomes apparent through increased urinary excretion of proteins and the cadmium concentration in the urine rises as a late herald of renal toxicity. SAFETY PHARMACOLOGY For much safety pharmacology, as with other areas of toxicology, interpretation is often dependent on the experience and historical control data of the laboratory performing the tests. On many occasions, the interpretative effort is focused on a small difference in one or two parameters in a single test, perhaps on one occasion at the high dose. It is very tempting to overinterpret such minor differences and to assume that there is a treatment-related effect when it is probable that there is not. Criteria that need to be applied include dose relationship at the time point considered and the character of the data at other time points. Another factor is the presence or absence of supporting data from other parameters in the test or from other studies, including toxicity studies if appropriate. As a last resort, historical control data from the laboratory should be consulted, providing it is reasonable to relate it closely to the study under consideration. For instance, route of administration, strain, and age should be the same or very similar; ideally, the vehicle should also be the same or at least have a similar degree of toxicity. A vehicle which affects transit time through the GI tract would not be an appropriate comparator for an oral study conducted with a simple aqueous solution. One area when historical control data are useful is when a positive control, for instance, furosemide, has not induced the expected effects in a renal function study in rats. The positive control results serve to conﬁrm that the test system has performed as expected; if the positive control does not produce the expected effect, the validity of the test has to be questioned very carefully. In interpretation, the presence of confounding factors in the study design or execution should be considered. The presence of excessive toxicity leading to reduced activity is likely to affect interpretation of an Irwin Screen. As mentioned in chapter 5, anesthesia can have profound effects on parameters measured in cardiovascular and respiratory studies. Where a set of measurements may be inﬂuenced by an animal’s reaction to its surroundings, such as in a restraint tube for respiratory measurement, it is important that a suitable period of acclimatization is allowed.

Interpretation: Different Data Types

253

When you are satisﬁed that the data are valid, the doses at which the adverse effect is seen should be compared to the doses eliciting the primary pharmacodynamic effect in the test species or the proposed therapeutic effect in humans, if feasible. It should be remembered that there are species differences in pharmacological sensitivity (1). Redfern et al. (2) wrote a comprehensive survey on the relationship between preclinical electrophysiology, QT interval prolongation in the clinic, and torsade de pointes with particular reference to the hERG assay, which examines blockade of K+ channels expressed in stably transfected human embryonic kidney cells. They came to the conclusion that the data set they analyzed has conﬁrmed that most drugs associated with torsade de pointes in humans also block the hERG K+ channel at concentrations similar to the free plasma concentration found in clinical use. They also suggested that a 30-fold margin between the concentration at which hERG channel block is seen and the clinical plasma concentration represents an adequate margin of safety for compounds which are positive in this assay. There are some caveats, however; verapamil has a twofold safety margin between its effective plasma concentration and its IC50 in the hERG assay but has not been associated with torsade de pointes. At the other extreme, the margins for some drugs associated with torsade de pointes are very much larger than 30-fold. It is clear, as with everything else, that a judgment has to be made in each case and in the light of results from more than one test. The extent of the interpretative problem is put into perspective by the statement by Redfern et al. that over a hundred drugs prolong QT intervals in man but that many of these have a history of safe clinical use. The retrospective discovery of torsade de pointes potential in a hitherto safe drug does not mean that it is suddenly unsafe; the margin of difference between the concentration at which it is clinically effective and that at which it has effects on the hERG channel should be taken into account, quite apart from the clinical history of use.

GENERAL TOXICOLOGY In some ways, general toxicology is the least precisely deﬁned and the broadest of all the branches of toxicological investigation, due to the number and variety of end points examined. A typical program of toxicity studies includes studies from single dose up to 12 or 24 months in length. This breadth of investigation poses a number of challenges in interpretation, which are best approached by taking an overview of the data, rather than trying to interpret change in each parameter in isolation from the others. In many ways, the presence of different parameters acting as markers of change in different organs or tissues gives greater security of interpretation, as change in one parameter may be supported by change or lack of change in another. In addition, the ﬁndings in one study should be reproducible in succeeding studies, giving conﬁdence that marginal effects are treatment related or spurious. There are classic associations that are useful to remember in everyday

254

A Guide to Practical Toxicology 2nd Edition

Table 1 Classic Associations in Toxicology Liver toxicity

Renal toxicity

Increased plasma activity of liver marker enzymes, e.g., ALT and AST

Increased water consumption and urine volume. Urine parameters may change, e.g., enzymes and cellular debris Increased plasma concentrations of urea and creatinine. Proteinuria Severe renal toxicity may lead to decreased erythrocyte parameters due to effects on erythropoietin synthesis Increased kidney weight

Decreased plasma total protein concentration Increased coagulation times due to decreased synthesis of coagulation factors Increased liver weight due to enzyme induction or accumulation of lipid or glycogen Change in colour or size at necropsy Histological ﬁndings such as necrosis or centrilobular hypertrophy due to enzyme induction

Change in colour or size at necropsy Histological change, e.g., basophilic tubules or necrosis, papillary necrosis, or glomerular changes

Source: Reprinted from Ref. 20.

situations, particularly in liver and kidney toxicities, which are the most frequent target organs; some of these are listed in Table 1. From this it may be seen that changes in a number of parameters can often be tied in to pinpoint change in a particular tissue or organ system. Some of the associations are unexpected. Thyroid change may be associated with a marginal anaemia due to variations in the plasma concentrations of thyroid hormones. Antibiotic administration in rats is associated with greatly increased cecum size, but also with a decrease in the peripheral neutrophil count, both as a result of a decrease in the intestinal burden of bacteria. Perhaps the most difﬁcult changes to interpret are those that have a multitude of different causes. Reduced growth and food consumption may be due to sedation, true appetite suppression, abdominal discomfort, or other less-speciﬁc and less easily identiﬁed causes. Reduced growth in the absence of reduced food consumption may indicate an effect on the GI tract or, in some cases, an effect on basal metabolic rate, as seen with decoupling of respiration. In rats, either of these will be associated with reduced efﬁciency of food conversion, a measure of the amount of weight gained per gram of food consumed; however, this is no use outside the growth phase—generally around 15 to 20 weeks of age in rats. Pituitary tumours in rats are linked with a range of clinical signs such as hunched posture and torticollis but particularly with weight loss and lowered food consumption. One of the most common effects seen in toxicity studies is induction of metabolism enzymes in the liver as a response to treatment with a xenobiotic. This is usually reﬂected in the liver by increased weight and hepatocyte hypertrophy in the central area of the liver lobule, around the central vein. Under the light

Interpretation: Different Data Types

255

microscope, the cytoplasm in the affected cells may have the appearance of ground glass. Under the electron microscope a large increase in the endoplasmic reticulum is evident, this being the site of many drug metabolizing enzymes, particularly the cytochrome P450 family. In rats, this hepatic effect is often associated with changes in the thyroid, seen as increased weights and follicular cell hypertrophy; there is usually a dose response for these effects in the thyroid, which may mirror the liver changes. As a result, there may be the long-term consequence of thyroid tumours in carcinogenicity studies. The effects in the thyroid are elicited by increased metabolism of thyroid hormones by the enzymes induced in the liver. Reduced concentrations of thyroid hormones result in reduced negative feedback on the hypothalamic pituitary-thyroid axis, leading to increased production of thyroid-stimulating hormone (TSH). The result is hypertrophy of the thyroid hormone producing cells; there may also be a hypertrophic response in the anterior pituitary. Male rats are more commonly and severely affected than females because they have higher circulating concentrations of TSH. This mechanism of toxicity is not thought to be relevant to man as the rat shows differences in protein binding of thyroid hormones, which tend to have a shorter half-life in this species than in man. In humans and monkeys, thyroxine and triiodothyronine are bound to a high afﬁnity thyroxine-binding globulin that is not present in other species; this lowers the percentage of free thyroid hormones. In rats, possibly, in part, as a consequence of the differences in protein binding and transport, the plasma half-life is between 12 and 24 hours compared with 5 to 9 days in humans. In addition, the follicular cells in the rat thyroid are very sensitive to increases in TSH; human thyroids are less sensitive to TSH changes than those in experimental animals (3,4). Table 2 shows some of the problems encountered in general toxicology studies and suggested reasons. One of the factors to be aware of in toxicity of any type is stress and the adventitious effects that it may generate in any type of test system. In general toxicology, stress may be associated with decreased thymus and increased adrenal weight. This effect may be induced indirectly or directly. However, it is important to remember that indications of immunotoxicity may be masked by this and it is sensible to check other indicators of immune function before ascribing change in the thymus to stress. A feature of general toxicity studies is the presence of specialist investigations, such as ophthalmoscopy, neurological examinations, and electrocardiography. In particular, electrocardiography poses a number of difﬁculties in interpretation because the method and conditions of collection are critical in deﬁning the value of the data. In an unanesthetized animal, the stress of examination will tend to increase heart rate and blood pressure, perhaps masking treatment-related effects that are present in the resting animal. To circumvent these problems, there is increasing emphasis on separate study of cardiovascular effects using animals with telemetry implants or life vests to monitor cardiac parameters such as heart

A Guide to Practical Toxicology 2nd Edition

256

Table 2 Troubleshooting in General Toxicology Unexpected toxicity, compared with prior tests

Variation in individual response

Low systemic concentration or area under the curve (AUC) Low toxicity Interspecies differences

Different response in males and females

Change in formulation or batch of test chemical. Poor predictivity of dose range ﬁnder studies due to factors such as differences in animal age, supplier, husbandry, or small group size. Metabolic polymorphism or other genetic factor, social factors in group housing, e.g., nutrition status. Poor absorption or poor formulation; isotonicity is important in parenteral formulations. Extensive ﬁrst pass effect. Short half-life. Low bioavailability; inappropriate route of administration or dose selection. Different ADME; different mechanism of effect; species-speciﬁc mechanisms such as peroxisome proliferation; entero-hepatic recirculation. Different expression of or afﬁnity for pharmacological receptors. Especially in rodents; due to different activities of metabolism enzymes in liver particularly but also physiological differences such as alpha 2 microglobulin excretion in males.

Source: Reprinted from Ref. 20.

rate, blood pressure, and electrocardiogram at regular intervals during the day. For the particular problem of QT interval prolongation, which was seen with drugs such as cisapride, there are in vitro studies that can give a reliable prediction of the presence or absence of this effect. Clinical Pathology Morphological Pathology Two critical areas of investigation in general toxicity studies are clinical pathology and morphological (postmortem) pathology. Although both are capable of separate interpretation, their power is much greater when the data from both are combined. In this way, the presence of change in the blood or urine without associated change in morphological pathology can be put into perspective in terms of toxicological signiﬁcance (Table 1). These investigations are useful during longer studies as they can indicate the target organ ahead of the terminal investigations and can lead to the use of specialist techniques for autopsy and microscopic examination. Generally, minor change in a single parameter, without any other correlative change, is unlikely to be of toxicological signiﬁcance—especially if the values are within expectation (always assuming that there are enough historical data to give conﬁdence).

Interpretation: Different Data Types

257

Haematology The critical groupings are indicated on page 138. The normal life span of an erythrocyte in the blood is around 100 days depending on species, and as they age they become less able to cope with oxidative stress. Aged or prematurely aged erythrocytes are removed by the spleen and if this process is accelerated, anaemia can result. If the bone marrow is healthy, there should be a compensatory increase in the immature forms of erythrocytes, particularly reticulocytes.If there is bone marrow toxicity, there may be a reduction in either erythrocyte or leucocyte counts or both; if erythropoiesis (generation of new erythrocytes) is affected there should be no compensating increase in reticulocyte count. Anaemia can also be induced by cell lysis in the peripheral circulation. Increased turnover of erythrocytes may be reﬂected in the presence of the pigment hemosiderin in the liver and increased plasma consentration of bilirubin. Changes in the leucocyte counts—total and differential—can indicate immunotoxicity or effects in the bone marrow. Changes in coagulation parameters are infrequent but can indicate liver change as the coagulation factors are synthesized there.

Clinical Chemistry and Urinalysis Changes in the plasma activity of enzymes can indicate the target organ for toxicity. It should be remembered, however, that early change in clinical pathology may not be reﬂected microscopically later in the study as the lesions may have resolved by that time. A further drawback of the theory of correlation of change in the plasma with morphological change is that it rarely seems to happen, except when the differences in the plasma are very large. Thus, increase in both alanine and aspartate aminotransferases (ALT and AST) is a good indicator for hepatic toxicity. An increase in the plasma activity of AST alone suggests a different target tissue, for instance muscle; this could be supported by increases in muscle enzymes such as creatine kinase or lactate dehydrogenase. Within the liver, alkaline phosphatase (ALP) is found on the biliary side of the hepatocytes and increase suggests an effect on the biliary tree such as cholestasis. Increases in the plasma activity of aminotransferases may be due simply to increased permeability of the hepatocyte membrane and this may not be associated with microscopic change. Where the enzymes are mitochondrial in origin, as with glutamate dehydrogenase or, in the rat, ALT, increased presence in the plasma may be indicative of necrosis, which should be evident microscopically. The presence of isoenzymes can complicate interpretation. ALP has isoenzymes that are speciﬁc for the liver (see earlier), bone, and gut. The bone isoenzyme decreases as growth slows and the gut isoenzyme varies diurnally according to the feeding cycle. There is also an isoenzyme of ALP in the kidney in the brush border of the proximal tubule lumen and the increased presence of this in the urine indicates renal toxicity. In the plasma, renal effects are indicated by increases in the concentration of urea and creatinine together. Increase in one of these alone is not usually indicative

258

A Guide to Practical Toxicology 2nd Edition

of renal change, especially urea which may be increased due to inappetence and consequent nitrogen imbalance. Other indicators of renal toxicity are urinary volume and speciﬁc gravity or osmolality; total electrolyte output; and the presence of various other analytes including proteins, blood pigments, and cellular debris. Although urinary enzymes such as ALP and N-acetyl glucosaminidase are good indicators of renal effects, they are not widely used in routine studies. The procedures used in urine collection should not be ignored in interpretation, including the duration of collection. Where the animals are placed in urine collection cages immediately after dosing, it is possible that the urine volumes and speciﬁc gravity will not reﬂect high water consumption recorded at other times of the study when free access to water is available. In this instance, in the absence of other evidence of renal change, the increased water consumption is probably a response to the dosing procedure rather than to any direct effect on the kidney. A factor to consider in interpretation of enzyme activities is the variability of the values between animals and between examinations. For example, creatine kinase is very variable and the levels can be affected by exercise and other factors, such as restraint. Lactate dehydrogenase, another enzyme with well-known isoenzymes, is also highly variable and is now less often examined. In studies in nonhuman primates, ALP may be considered to be too variable for meaningful interpretation and can be replaced by leucine aminopeptidase. During longer studies, where several examinations of blood and urine are undertaken, change with continuing treatment (or reversal of change following cessation of treatment) can indicate the progress of toxicity or the development of tolerance to the effects of the test compound. At the end of the study, these changes may be correlated with the presence of changes in the target organs when they are examined at necropsy, weighed, and then processed histologically for microscopic examination. MORPHOLOGICAL PATHOLOGY Interpretation in pathology is a specialist area very much dependent on the experience of the pathologist performing the examination. Toxicological pathologists are famous for the divergence of their opinions and it must be realized that an unwelcome conclusion will not be removed simply by getting another pathologist’s viewpoint. What you then have is two opinions that are often slightly different and sometimes conﬂicting. The key to pathological conﬁdence is to ensure that the peer review, which is undertaken before ﬁnalization of the pathology report, is scrupulous, fully recorded, and agreed. In examining differences in lesions, especially tumours, it is vital to ensure that the same number of sections have been examined from all the treated groups. Where macroscopic abnormalities are seen at necropsy in the highest dose group, more sections will be prepared and examined than in the controls. This can easily increase the recorded incidence of routine background ﬁndings, thus giving a false impression of treatment-related effect. Non-neoplastic ﬁndings are usually graded from minimal to severe or marked and it is possible to see effects as increases in severity with increasing dose or

Interpretation: Different Data Types

259

as increases in incidence and severity. It is important that the interpretation takes this into account. In general, it is not practicable to provide historical control data for non-neoplastic pathology because the data collection is to a degree subjective, for instance, in assigning grades. However, if there is an increase in incidence of a normal ﬁnding over the expected incidence in controls, it should be possible to offer an opinion on its signiﬁcance. Considerations in this assessment include any increase in severity over expectation with increasing dose and the location and type of change. Before attempting to interpret any data, it is important to have some understanding of its provenance and signiﬁcance. For numerical data of simple parameters, this is relatively straightforward. Morphological pathology is more complex and it must be acknowledged that the following discussion is not intended to equip you to interpret every pathology report that you read. This section is intended to be a stepping stone, so that the changes detailed in a pathology report can be placed in an appropriate context; if it helps you to ask the right questions, it may have done its job successfully. The following text is derived from part of a distance-learning course I prepared on the Assessment of Toxicity for the Pharmaceutical Industry Advanced Training programme based at Manchester University. The intention is to review the types of change to look for in pathology, starting with the cell as the basic functional unit. With the exception of the nucleus, the normal cell is the smallest discrete unit that is visible to routine light microscopy. In terms of tissues and organs, many effects reﬂect changes in the cells that compose the tissue, either as direct effects on the cells themselves or as a result of changed cellular function in the extracellular tissues. The Cell Death is always a crude end point, whether an entire animal is involved or simply a focus of single cell necrosis. Necrosis is the form of cell death that is associated with frank toxicity within the cell; in essence it is unplanned and messy. This contrasts with apoptosis, which is programmed cell death and for which the causes may be much more subtle. In addition to cell death, effects at the cellular level may be seen due to changes in the following: r Composition of the cytoplasm or cell contents including extranuclear organelles such as the endoplasmic reticulum r Plasma membrane r Hypertrophy and atrophy r Rate of cell division—hyperplasia r Death rate of cells—apoptosis or necrosis. Subcellular Organelles Subcellular change may be seen as effects on the cytoplasm or the nucleus. Effects on the cytoplasm may be seen at routine light microscopy as tinctorial or

260

A Guide to Practical Toxicology 2nd Edition

textural changes or as increases in the distance between the nuclei of adjacent cells. This is typically seen in hepatocytic hypertrophy. As a result of enzyme induction, the endoplasmic reticulum, which is the location of cytochrome P450 and associated xenobiotic metabolizing enzymes, increases and this is associated with increased cytoplasm in each cell. The result is that nuclei in the affected region—often the central zone of the liver lobule—become further apart and this is evident in comparison with controls and with the adjacent periportal region of the liver. The nucleus goes through a well-deﬁned series of changes in response to cell death, which may be programmed (apoptosis) or due to direct toxic insult (necrosis). Grasso (5) suggested that no morphological change resulting from sublethal damage by xenobiotics has been reported in the nucleus, although extensive damage is possible at the molecular level. There are two types of cell death: necrosis and apoptosis. Necrosis is generally considered to be a random event that may affect single cells (single cell necrosis, often seen in the liver) or groups of cells. Nuclear change may be seen as karyolysis or pyknosis. In the former, the nucleus fades to a ghost outline, which may be due to nucleic acid degradation in response to a drop in cell pH. In pyknosis, the nucleus shrinks and stains more densely, followed by fragmentation; this is also known as karyorrhexis. Necrosis may be the result of gross changes in calcium distribution in the cell, between the endoplasmic reticulum or mitochondria and the cytoplasm. In contrast, apoptosis is programmed, physiological cell death and is much tidier. While necrosis may be associated with macroscopic changes that are evident grossly, apoptosis is not evident at macroscopic examination. Apoptosis is an essential process in normal embryonic development and disruption can lead to embryonic abnormalities. Later in life, disturbances in apoptosis may be associated with carcinogenesis. Apoptosis is more difﬁcult to visualize, requiring specialist techniques, than necrosis because of its subtlety and relative rarity. Composition of the Cytoplasm or Cell Contents Leaving aside the usually lethal changes in the physiological balance of the cell in respect of electrolytes such as calcium, sodium, or potassium, there is a number of changes possible in the cytoplasm, often as the result of changes in storage. Cells can store carbohydrate or lipid and the levels of these may be affected by several toxicological mechanisms. Carbohydrate storage is usually found in the liver and increased amounts can lead to a foamy appearance of the cytoplasm due to its loss during the routine histological processing. Vacuolation due to the presence of fat—which is also lost during routine histological processing—is usually evident as micro- or macrovacuolation. The accumulation of fat is a toxicological effect indicative of an effect on lipid utilization or export. This type of change is often seen in the liver or kidney.

Interpretation: Different Data Types

261

Pigments may also accumulate in the cell due to toxicological processes: r Lipofuscin is a “wear and tear” pigment that results from lipid peroxidation and reﬂects the polymerization of lipid peroxides. r Hemosiderin is a breakdown product of hemoglobin and may accumulate in tissues such as the liver, spleen, and bone marrow in response to hemolytic anaemia. Although not strictly a pigment, calcium has afﬁnity for dying or damaged cells. Usually the location is consistent with single cells, although more generalized calciﬁcation or mineralization may be seen. Hyaline deposits or droplets are indicative of protein deposition in cells and may be seen in renal proximal tubules as a result of reabsorption of protein not ﬁltered out of the urine by the glomerulus. Plasma Membrane Changes Damage to the cell plasma membrane or to the membranes that enclose the organelles such as the endoplasmic reticulum is likely to lead to changes in permeability or function. While some agents such as anesthetics and detergents affect membranes in a general sense, there are also speciﬁc molecular events such as effects at receptors, protein channels, or enzymes embedded in the membrane. Binding to receptors or blockage of ion channels are frequent sources of toxicities. Membranes have high lipid contents that are affected by oxidative attack—lipid peroxidation—and are damaged accordingly. Increased membrane permeability can result in entry or leakage of minerals or water and may be associated with leakage of enzymes into the plasma, which becomes evident in the results of clinical pathology measurements. Gradual leakage over a prolonged period should be distinguished from sudden release—and high-enzyme activities – that are associated with extensive cellular necrosis in organs such as the livers of rats treated with carbon tetrachloride. Hypertrophy and Atrophy At the cellular level, these terms relate to changes in size of cells but not in number. Hypertrophy is seen in hepatocytes in response to enzyme induction. Atrophy is seen in tissues such as the skeletal muscle but is more usually applied to complete tissues, such as the thymus. Hypertrophy in the zona reticulata and zona fasciculata of the adrenal is a frequent response to stress and is usually seen in conjunction with thymic atrophy. Thymic atrophy is a normal process that is age related. If it is seen without changes in the adrenal and earlier than in the controls, it may indicate immunotoxicity, either as a direct or indirect effect. Other data relevant to the immune system should be assessed to conﬁrm this.

262

A Guide to Practical Toxicology 2nd Edition

Hyperplasia and the Rate of Cell Division Hyperplasia—an increase in cell numbers—is seen as a response to a number of toxic agents. While hyperplasia may be a precursor to tumour formation, it is often reversible on cessation of treatment. Hyperplasia may be physiological and this is often seen throughout a tissue or a region of a tissue, particularly in the endocrine system. Hyperplasia may also be seen in response to repeated toxicological insult, as in chronic irritation of skin or epithelia such as that in the bladder. Persistent hyperplasia may lead to tumour formation, which in these cases is usually a nongenotoxic response to treatment. The converse of hyperplasia—when cell division ceases or is inhibited— has serious effects. At the most basic, it may result in lack of growth; at its most serious, it can result in rapid death. Agents used in the treatment of cancer are expected to reduce or halt cell division as the basis of their therapeutic effect on the tumour. However, the disadvantage of this is that tissues with high rates of cell division, the gastrointestinal tract, bone marrow, and skin are likely to be affected. Changes to Whole Tissues or Organs These various cellular events are likely to be associated with change at the level of whole organs or tissues. However, the presence of so-called functional reserve in many organs is a factor in delaying the onset of overt change. This reserve varies from tissue to tissue and is an indication or the amount of damage that an organ can suffer before functional disruption and toxicity become evident; morphological change is probably one of the last processes to occur. Inﬂammation This is a vital defense system in mammals and is divided into acute and chronic forms. Acute inﬂammation is a dynamic process that is characterized by erythema, heat, oedema, and pain. It may have differing degrees of oedema or structural tissue changes and may have differing dominant cell types associated with it. Inﬂammation may be initiated by allergens, infection, injury, or toxic insult. It is most easy to see in the skin, from which the classic descriptions of the signs— rubor, calor, turgor, and dolor—are taken. Initiation of inﬂammation can lead to a red, swollen area that is painful and hot. Although inﬂammation is most visible on the skin, the process is the same in any affected tissue. The location of the inﬂammation may dictate which parts of the process are dominant. For example, inﬂammation in the lung is dominated by oedema, which is not seen in bone; however, pain in bone inﬂammation is more noticeable. Inﬂammation may end in the formation of an abscess or an ulcer, by resolution or ﬁbrotic repair and scar formation. An abscess is an accumulation of dead polymorph leucocytes, surrounded by granulation tissue, while an ulcer represents

Interpretation: Different Data Types

263

the loss of epithelium and the formation of granulation tissue, which is a new connective tissue. Unless the tissue resolves completely to normal, which is unusual given that most injuries will include the local connective tissues, scar formation is inevitable. The consequences (sequelae) of acute inﬂammation may include complete resolution, resolution with scarring or it may progress to chronic inﬂammation, which is seen if the stimulus persists or is repeatedly applied. Acute inﬂammation is of short duration (days or weeks) while chronic inﬂammation may persist for months or years. While acute inﬂammation is characterized by the presence of polymorphs, prominent granulation tissue and capillary formation, and an absence granuloma, chronic inﬂammation has more macrophages and ﬁbroblasts, low levels of granulation tissue and capillary formation, and prominent granulomas. Common causes of granulomas are foreign bodies, including dusts such as talc or silica. Changes in Blood Supply The blood supply to any tissue is, naturally, essential for maintaining the supply of oxygen and nutrients; disruption for anything other than transient periods may be critical. There are clearly two possibilities in terms of blood supply, namely, an increase or a decrease. An increase is usually seen as congestion and may be a response to local irritation, inﬂammation, or similar factors. Congestion implies a local dilation of the blood vessels and this may be associated with reduced blood ﬂow; this may then result in reduced oxygenation of the affected tissues. A decrease in blood supply in a critical location may be fatal. Although this appears to be cut and dried, there are situations where blood supply may be interrupted temporarily or restricted so as to limit oxygen supply. This is classically seen in the papillary muscle of the beagle and minipig heart in response to agents, which increase heart rate but reduce blood pressure. The papillary muscle is relatively poorly perfused when the dog is at rest; with increased heart rate the muscle contracts more frequently but, with reduced blood pressure, is not perfused with enough blood to maintain itself. The result is necrosis and this is an acknowledged effect of this type of agent in beagle dogs. Blood supply is also an important factor in embryonic development and tumour growth, which have some analogies, as they are both situations where new tissue is forming rapidly and is dependent on blood ﬂow. Reduced blood ﬂow to the placenta would be expected to have potentially dire effects on the foetuses in the uterus and, at the least, could be expected to be associated with reduced fetal weights; effects beyond that might include early resorption, fetal death, or abortion. In tumour growth, angiogenesis—the process of formation of new blood vessels—is an essential factor; when blood supply to the center of large tumours starts to fail, the affected areas may become necrotic, giving a characteristic cut surface at necropsy.

264

A Guide to Practical Toxicology 2nd Edition

Repair and Reversibility These two concepts are indivisibly linked, although it should be considered that repair does not necessarily mean reversibility. If a tissue is affected by a toxicant, the damage may be repaired but leave evidence of its repair in the shape of ﬁbrotic lesions, which can be associated with functional change. Repair may be affected by regeneration of lost cells or by ﬁbrosis. Dead liver cells may be replaced by proliferation of adjacent healthy cells. Basophilic cells are characteristic of the early stages of regeneration and are often seen in the kidney where damage repair may be seen as basophilic cells or tubules. When these cells become more differentiated to the normal function state, they lose their basophilic characteristics. In the kidney, death of the proximal tubular cells is followed by their shedding into the tubule lumen; the next stage is a gradual reconstitution of the tubular epithelium, ﬁrstly as ﬂattened cells which then become cuboidal before resuming the normal morphology of the proximal tubule. This type of repair is likely to be effectively invisible unless the tissues are harvested at the time that the damage or repair is in progress. It is possible to have early kidney damage that is not seen at subsequent tissue harvests weeks later. However, this process of repair in the kidney is heavily dependent on the integrity of the basement membrane of the proximal tubule epithelium, and if this is breached, this seamless process of repair is hindered, leaving the opportunity for persistent lesions that will effectively reduce renal function. Fibrotic repair, however, is likely to leave persistent lesions that will be seen weeks or months after the event. It is characterized by the presence of new connective or granulation tissue and collagen. The consequence is scarring and a permanent lesion that may, if exposure is continued, accumulate to the extent that it inhibits normal function of the tissue, as in cirrhosis of the liver in response to chronic alcohol consumption. The speed of repair may differ between lesions and tissues. Repair in the liver can be very rapid; following a toxic dose of carbon tetrachloride, hepatic repair may be complete by the time a normal 14-day observation period has been completed. On the other hand, changes due to accumulation of pigment or intracellular bodies generally take much longer to reverse, as the metabolic processes of removal tend to be slow. The consequence is that reversibility of pigment or protein inclusions may take much longer than the 4-week reversibility period, which is routinely allowed in toxicity studies. In this situation, it is useful to have data from two dose levels available to get an estimation of any dose relationship in the extent or rate of repair. Broadly speaking, the reversibility of morphological change is seen as a mitigating factor in the assessment of toxicity and it may be cited as a reason for categorizing the change as not being of toxicological signiﬁcance. However, before this can be done with conﬁdence, the tissue affected, the nature of the original change, and its severity and incidence must be taken into account. Generally, hypertrophy of hepatocytes around the central vein, which is usually due to enzyme

Interpretation: Different Data Types

265

Table 3 Benign Versus Malignant Tumours Benign

Malignant

Remains at the point of origin

Invades adjacent tissues metastasis to distant locations through blood and lymph Poorly deﬁned margins

Often encapsulated with deﬁned margins May compress adjacent tissues Necrosis is not common but may occur if blood vessels are compressed. Growth tends to be slow. Tumours arising in epithelial and mesenchymal tissues are sufﬁxed—oma

May destroy adjacent tissue Necrosis is common. Growth may be very fast Tumours of epithelial origin are sufﬁxed−carcinoma; those from mesenchymal tissues are sufﬁxed−sarcoma

induction, is readily reversible and is seen as an adaptive change that is, depending on scale, unlikely to be of toxicological signiﬁcance. The same may be said of minor change in the renal proximal tubule. However, it may be necessary to view even reversible change in some tissues with suspicion; changes in the nervous system, either peripheral or central, may presage toxicity that will be limiting in longer studies or—more importantly—in exposed humans. Neoplasia Literally new formation or development, neoplasia is a critical process in toxicology; it may be benign or malignant, the latter being cancer. It is not the intention to discuss mechanisms of tumorigenesis or other aspects of carcinogenicity testing here as they are covered elsewhere in this book. Neoplasia is distinct from hyperplasia, which is essentially an increase in cell numbers without differentiation from normal tissue. The basic comparisons between benign and malignant tumours are given in Table 3. Diagnosis and classiﬁcation of tumours is a contentious area for pathologists and can be a source of acrimonious dispute. While the classiﬁcation of tumours by the use of the sufﬁxes—oma for benign tumours and sarcoma for malignant tumours—is apparently foolproof, there are exceptions, melanoma and mesothelioma both being aggressive malignant tumours. For most purposes in toxicity testing, neoplastic tissue is most likely to be seen in aged rodents, typically rats or mice. The appearance of tumours in other species is very rare, usually in single animals and not related to treatment. Any tissue can be subject to a carcinogenic response; for example, Zymbal’s gland in the rat ear is the site of sebaceous carcinomas induced by 2-acetylaminoﬂuorene. There is no reason to suppose that any particular tissue is not going to be associated with a carcinogenic response. However, some tissues are more likely to be affected than others, the principal one being the liver, predicated

266

A Guide to Practical Toxicology 2nd Edition

on its central role in metabolism and the fact that it is the site of ﬁrst systemic exposure following absorption from the gut. Other rodent tissues that are frequently affected include the forestomach, the lung, testis, kidney, and hemopoietic system. The actual background frequencies differ between strains and species and, in some cases, the sexes. Overview of Interpretation in General Toxicology In simplistic terms, the tissue, type, extent, and reversibility of the ﬁndings determine the signiﬁcance of pathological change. A minimal, centrilobular hepatocystic hypertrophy, with a slight increase in liver weight but without associated clinical pathology change, is likely to be of low toxicological signiﬁcance if it is shown to be readily reversible. This type of effect is seen typically with minor induction of hepatic metabolism. Where the mechanism for an effect is known, as for hemosiderin deposition in the liver in hemolytic anaemia, the ﬁnding is also unlikely to be of toxicological signiﬁcance, if the cause itself was not so great as to be of concern. Pigment deposits are unlikely to be quickly reversible, as the pigments tend to be slowly metabolized and therefore more persistent than easily repaired changes in tissues such as the liver or kidney. Changes in tissues that do not repair readily, such as the nervous system, are of much greater concern. These have to be considered in terms of no effect dose levels and the difference between toxic levels and those seen or expected in human populations. The levels of endocrine hormones are frequently not investigated in routine toxicity studies, in part because of the effects that stress of sampling can have on their plasma concentrations. However, examination of endocrine glands, or tissues under hormonal control, can indicate the presence of hormonal change and point to potential problems that may be seen in longer studies. This is due to the large inﬂuence that hormonal levels have on nongenotoxic carcinogenesis. REPRODUCTIVE TOXICOLOGY In general toxicology the principal time-dependent change is growth, with increasing maturity and metabolic capability, which occurs over the lifetime of the animal. In contrast, reproductive toxicology adds extra layers of complication, because of its sensitivity to disturbance and the added dimension of transient, time-speciﬁc processes, which themselves have considerable complexity. The ﬁnal outcome— offspring that can reproduce in their turn—is inﬂuenced by effects on processes that start with male spermatogenesis and function, continue with mating behavior in both sexes and gestation, culminating in parturition and postnatal care and development. To this can be added, in rare cases, transplacental carcinogenesis, as expressed by diethylstilbestrol. Reproductive toxicology is an area in which in vitro screening has been adopted in order to speed the selection of compounds for further development or for chemicals, which are already on the market but have not been examined

Interpretation: Different Data Types

267

previously. These tests, although reasonably predictive of effects in vivo, are not infallible and it has to be asked whether the experiment has produced a result that is relevant to humans. Where the compound has been marketed for a signiﬁcant time without problem and comes from a class of chemical which is not known for reproductive toxicity, it is probably reasonable to dismiss the in vitro data as not relevant—although it would be sensible to say why. Taking whole embryo culture as an example, the major differences from the situation in life are the absence of a placental barrier and of maternal metabolism, both of which can have a protective effect for the foetus. Although it may be relatively simple to conclude, from basic data, that a chemical reduces fertility or that it causes a reduction in postnatal survival, the root cause may not be obvious. In considering the results of fertility studies, it is useful to refer to the data from general toxicity studies for effects on reproductive organs or for data which might imply any hormonal effects. Depending on the data, and the existing knowledge of the compound’s class and expected actions, it is important to conﬁrm that the males were treated for long enough before mating to show any effects. Maternal toxicity is also a factor to consider. In general, guidelines require that the high dose be chosen so as to show toxicity, but excessive maternal toxicity can result in delayed development in the uterus, which may imply effects that are not immediately relevant to humans at low exposure levels. Typical of these are retarded ossiﬁcation and reduced fetal weights. Much of the sensitivity of reproduction arises from the interdependence of factors such as hormonal balance, nutrition, behavior, physiology, maintenance of the placental barrier, and the complex balance in the embryo between growth, programmed cell death (apoptosis), and essential processes such as angiogenesis. Table 4 shows some of the problems that may be encountered in reproductive toxicity studies; it is by no means exhaustive. The conclusion is that interpretation of reproductive toxicity studies must be undertaken only when a full data set is available, including data for ADME. The data relating to fetal exposure and to excretion in the milk are particularly important in this and these tests should be undertaken if there is any question that these factors may be relevant to the results in the routine testing program. GENOTOXICITY This is the one area of toxicological testing in which in vitro tests have been accepted by regulatory authorities, largely due to the relatively easy deﬁnition of the end point, which is essentially that of DNA damage either at the level of the gene or the chromosome (Tables 5 and 6). For secure conclusions to be drawn, all the genotoxicity studies need to be considered together. In contrast to other branches of toxicology, strength of response is not generally taken to be a prime factor in interpretation, as even a weak genotoxic response indicates mutagenic potential. Extrapolation from effective concentrations in vitro to those seen or expected in vivo is not sensible without caution and, as a consequence, no

268

A Guide to Practical Toxicology 2nd Edition

Table 4 Troubleshooting in Reproductive Toxicology Reduced fertility—male

Reduced fertility—female

Wavy or extra ribs Unexpected toxicity in rabbits

Prolonged or abnormal parturition Poor survival of pups postpartum

Spermatogenesis or other testicular change (see histopathology), epididymal function changed, change in sperm quality (CASA results), behavioral change, and stress Lower implantation rate, increased postimplantation loss—possibly due to excessive maternal toxicity, behavioral change, and stress Variant that is generally not thought to be signiﬁcant Inappropriate vehicle—oils or other vehicles which affect gastrointestinal function are not suitable in rabbits. Stress can also be a factor in this species Hormonal imbalance Defective lactation or maternal care; excretion of test chemical or metabolites in milk

Abbreviation: CASA, computer assisted sperm analysis. Note: The factors listed in Table 2 should also be considered. Source: Reprinted from Ref. 20.

threshold is accepted for mutagenicity in vitro. Pragmatically, however, it is clear that there is a gradation of potency between mutagens and a positive response at very high concentrations is less likely to be relevant to the situation in life. Having said that, interpreting the results as positive requires some care. A positive result is indicated by a clear dose–response curve; if there is a sudden increase in effect at high concentrations, this may be due to physical effects or toxicity and be irrelevant biologically. In addition, the difference from controls should be statistically signiﬁcant. The weakness of the statistical approach, as for many of these tests, is that as n is usually only 3 the statistical method is inevitably not especially powerful; use of larger numbers of negative controls (e.g., 6) helps this situation. Finally the results of the test for controls and positive controls should be compared with historical control data to conﬁrm that they are within expectation. Positive results are sometimes found when testing early research batches of the chemical, due to the presence of impurities. These can also be introduced (or eliminated) by changes in production methods. As with all toxicology, exposure must be demonstrated; this is generally not a problem in vitro, where even precipitates have been associated with genotoxicity. Physicochemical properties that prevent the substance crossing the cell membrane and solubility in aqueous media may become limiting factors. Proof of exposure of the target cells is a particular problem in the in vivo micronucleus test, especially with a negative result. In some cases, excessive toxicity or pharmacology limits the doses that can be achieved leading to inadequate exposure of the bone marrow.

Interpretation: Different Data Types

269

Table 5 Guide to Genotoxicity Interpretation Negative result

Positive results

Micronucleus test

Ames test (bacterial reversion assay)

Cytogenetics–CHO cells

Mouse lymphoma assay UDS

No dose–response curve or statistically signiﬁcant increase in effect compared with the negative controls, providing the positive controls have performed as expected. In vitro this is conﬁrmed in a second experiment, sometimes with different harvest times. Evidence of exposure is essential in in vivo tests. There should be a statistically signiﬁcant increase with dose response. A two- or threefold increase over control values has been used. Mean micronucleus count in controls and positive controls must be sufﬁcient for the study to be acceptable; indicative values are 4 and 10 micronuclei per 2000 polychromatic erythrocytes per animal, respectively. There should be a dose–response curve with at least one point with a statistically signiﬁcant increase in aberrations over the vehicle control. There should be a dose-related statistically signiﬁcant increase in numbers of revertant colonies in two separate experiments. The strains indicate the following: TA1535,TA100 → Base substitution. TA1538,TA98 → frameshift. TA1537,TA97 → single frameshif. Clastogenic effect is indicated by a dose–response curve with at least one point having a statistically signiﬁcant increase in aberrations over the solvent control. Reduced damage scored at higher dose levels may result from complex interactions between cell cycle and induced damage and the dose–response curve may not be a simple increase in damage with dose. Small colony size may indicate slow growth due to DNA damage, while large size may indicate point mutation. The interpretation of large and small colonies is still debated. Increase in nuclear grain count indicates a positive result. Autoradiography allows correction of grain counts for cytoplasmic synthesis of nucleic acids.

Source: Reprinted from Ref. 20.

In circumstances where it is not practicable to achieve high systemic exposure, a negative result in vivo cannot offset a positive in vitro result. The initial response to a positive result should be to ask if it is biologically relevant and how it has arisen. Before a positive result can be dismissed, it is important to understand the underlying mechanism. Thresholds of response are a factor in assigning a negative result to a test. These may be due to interaction with non-DNA targets, for instance, through conjugation or lack of availability to DNA at low concentrations. This is seen with paracetamol, where the active metabolite

270

A Guide to Practical Toxicology 2nd Edition

Table 6 Troubleshooting in Genotoxicity General problems Lack of toxicity or negative result

No response in positive controls Different results for different batches Cytotoxicity

Positive in vitro not veriﬁable in vivo

Positive result

Possibly due to poor exposure. Mouse micronucleus test—limit dose 2000 mg/kg orally → no effect → has it been absorbed? Try parenteral dosing. (Negative result may be due to excessive toxicity) Has the test system been correctly characterized? Test substance purity. Manufacturing process changes Excessive cytotoxicity may give a positive result in chromosome aberration studies. In the mouse lymphoma assay positive responses at ⬎90% cytotoxicity are not considered biologically relevant BUT need a close dose range to demonstrate reliable negative results. Exposure in vitro cannot be replicated in vivo at target tissue. Can be due to poor absorption or excess pharmacology or different metabolism. If the positive result was with S-9 mix, does this mimic metabolism in vivo or in test species or in humans. Perform new in vivo test (UDS) or in vivo mutation. Review of all data and assessment of cost/beneﬁts. Choose additional assays that will help explain the result rather than simply add to the data set. Troubleshooting in speciﬁc tests

Ames test In vitro mammalian cytogenetics or micronucleus

In vivo micronucleus

Unscheduled DNA Synthesis (UDS) Source: Reprinted from Ref. 20.

Lower colony counts at high concentrations may be due to toxicity which can conceal a positive result Chromosome damage at high concentrations in mammalian cells in vitro may indicate that the harvest times were inappropriate; different harvest times in the second experiment may help to clarify effects seen. Threshold effect or lack of dose response at high concentration may be without biological relevance, due to physical effects or toxicity or presence of metabolites at high concentration (in presence of S-9 mix). Excess pharmacology or toxicity or poor absorption. First pass metabolism ➝ poor systemic exposure to parent. Different active molecule at target tissue compared with in vitro. Excess stress may lead to a small increase in micronuclei. Ex vivo preferred over in vitro; autoradiography preferred over liquid scintillation counting

Interpretation: Different Data Types

271

is conjugated at low concentrations. There may also be metabolites that are not formed in vivo or in humans. Pharmacological activity, such as spindle inhibition, can also produce positive results. As with other areas of toxicology, thresholds of effect are important in interpretation in genotoxicology as the presence of an effect beyond a particular, and preferably high, dose may indicate that the effect seen is not relevant to humans. Kirkland and Muller (6) published a review on the importance of thresholds in the interpretation of the biological relevance of genotoxicity test results. They noted that there has been an increase in the numbers of positive results, especially in in vitro chromosomal aberration tests, but that few of these were associated with positive results in vivo. This lack of correlation calls into question the relevance of the in vitro result for either rodents or humans (the lack of concordance between rodent genotoxicity and/or carcinogenicity and the same end points in humans is another matter, that is dealt with elsewhere in this book). Although a threshold response at high concentration may not indicate any genotoxic risk at concentrations likely to be experienced by humans (or whatever target species), such effects should be explained and the mechanism of effect understood before they can be dismissed. Such mechanisms include extremes of pH, ionic strength or osmolality, indirect genotoxicity due to interaction with non-DNA targets, genotoxicity due to metabolites present at high doses that are conjugated or cleared effectively at low doses, and/or production of metabolites in vitro that are not present in vivo. Broadly, if the margin of difference between the threshold concentration and those expected in humans is very large, there is a good argument that the genotoxicity seen in vitro is not biologically relevant. It is routine in genotoxicity testing in vitro to conﬁrm the results of a ﬁrst experiment in a second, preferably with slightly different conditions or harvest times. Because the assays are relatively inexpensive, it is easy to react to positive data by repeating assays or performing new tests. Among these, due to normal biological and statistical variation, there will be a proportion of results that are also positive. In these cases, as the data set grows, an overall interpretation becomes much more difﬁcult. The moral of this is to be very careful about repeating tests or choosing supplementary ones. CARCINOGENICITY Data relevant to potential carcinogenicity are contained in several different study types, including the classic rodent life span bioassay. As with genotoxicity studies, which are a critical part of carcinogenicity assessment, the data package should be viewed as a whole. Data relevant to carcinogenicity can also be derived from routine toxicity studies and these can give valuable indicators for potential nongenotoxic carcinogenesis. Effects such as enzyme induction or the presence of hepatic foci with different staining characteristics may be associated with a later positive result in the carcinogenicity bioassays. As already said elsewhere, the genotoxic carcinogens are relatively easy to detect before getting to the stage of

272

A Guide to Practical Toxicology 2nd Edition

Table 7 Carcinogen Classiﬁcation Good epidemiological evidence in humans; about 30 compounds Limited epidemiological evidence, sufﬁcient evidence in animals Insufﬁcient human evidence, reasonable evidence in animals Not classiﬁable Not considered to be carcinogenic

Known human carcinogens, e.g., arsenic, benzene, vinyl chloride, aﬂatoxin Probable carcinogen, e.g., polychlorinated biphenyls, diethylnitrosamine, phenacetin Possible carcinogen, e.g., TCDD, DDT, diethyl-hexylphthalate

IARC group 1

Diazepam Caprolactam

IARC group 3 IARC group 4

IARC group 2A

IARC group 2B

Note: Compiled from sources in the bibliography and reprinted from Ref. 20.

long-term studies, the chemicals that are carcinogenic indirectly are much more of a challenge. Classiﬁcations of carcinogens, for instance, by International Agency for Research on Cancer (IARC), give useful background to interpretation in this often contentious area (Table 7). The mainstay of carcinogenicity assessment is still the 2-year bioassay in rodents, although transgenic models are becoming more important, especially in the United States. The basic intention is to demonstrate the presence or absence of an increase in tumour incidence or burden in treated groups compared with appropriate controls. This apparently simple objective becomes increasingly complex as the various supporting or inﬂuencing factors are considered. Differences in tumour burden or time of onset (latency), between control and treated groups, may be attributable to a range of factors other than the simple mechanism of action of the test substance. The effect of these factors may be additive or negative. Increased growth and bodyweight tend to increase tumour burden and to produce a different tumour distribution compared with animals that grow less and more slowly. This has been the subject of considerable debate in recent years and has resulted in the use of strains that do not eat and grow so much. In some models, the tumour incidence in the controls can approach 100%, which effectively reduces the information derivable from the study to an assessment of effect on latent period for tumours; this has been seen in some photocarcinogenicity protocols. As with reproductive toxicology, carcinogenicity assessment is very dependent on the quality of the historical control database. If that is deﬁcient, the assessment of the signiﬁcance of rare tumours becomes much more difﬁcult. Although use of a double control group will alleviate some of this, it cannot completely answer the problem. The use of mortality adjustment and statistics can only be of assistance with more common tumours and cannot address the single renal carcinoma that may be found in the high-dose group. In the lower dose groups,

Interpretation: Different Data Types

273

a single rare tumour may not be a problem, providing there is no evidence of a U-shaped dose–response curve or excess toxicity at the highest dose. Other data that are available for assessment of carcinogenicity potential include the routine toxicity studies, genotoxicity, pharmacological actions (including those peripheral to that expected), and the metabolism and pharmacokinetics (Table 8). It should be borne in mind that pharmacokinetics and metabolism may differ at high doses from that seen in the lower dose groups and that the pharmacokinetics for the test compound may well change as the animals get older. In particular, renal function declines with age, and, if there is any subclinical nephrotoxicity, this decline may be accelerated by treatment. The assessment of toxicokinetics in long-term bioassays may not be available for the later stages of the study, as this is not always a regulatory requirement. This is a signiﬁcant weakness of current guidelines. Where a chemical has been shown to produce tumors in both sexes of both species or in several organs, it is a clear indication that this is a carcinogen of probable relevance to humans. Having said that, it has been difﬁcult, with some known human carcinogens (such as arsenic) to produce tumours in animals. Where there is an increase in tumour incidence in one sex in a single tissue, it is possible that this may be due to a nongenotoxic mechanism that is unlikely to be of relevance to humans. This requires mechanistic studies for conﬁrmation of lack of relevance. This category contains a large number of chemicals acting through well-established mechanisms, such as peroxisome proliferators and those that act on the ␣2u globulin. These are associated with signiﬁcant non-neoplastic pathology in the affected tissues and are, theoretically, easy to predict from the results of the routine toxicity studies. With this type of data, it may be possible to prepare for interpretation of the carcinogenicity studies in advance by performing appropriate mechanistic studies. Nongenotoxic mechanisms of carcinogenicity are often accompanied by a clear threshold dose below which no effect is seen. Within a class of chemicals, differential absorption of the class members may lead to unexpected differences in effects in the rodent studies. This may be investigated by comparative assessment of toxicokinetics, as was shown for the ﬁbrate family of hypolipidemics; this is described in the ciproﬁbrate case study at the end of this chapter.

ENVIRONMENTAL TOXICOLOGY AND ECOTOXICOLOGY Data for these linked disciplines relate to testing following deliberate (and known) exposure of individual test systems or speciﬁed areas (ecotoxicity tests), or investigation of unexpected effects in the environment as a whole (such as eggshell thinning or population changes) (Table 9). These data sets are distinct and set different challenges in interpretation. There is an implicit distinction between environmental events that affect people and those that affect the ecosystem as a whole. The former represents the interface between epidemiology and environmental toxicology and includes episodes that affect human populations.

274

A Guide to Practical Toxicology 2nd Edition

Table 8 Guide to Carcinogenicity Interpretation Tumour increases in both sexes, both species Tumour increase in one sex in both species Negative genotoxicity data, with tumour increase in one tissue, possibly in one sex

Low toxicity

Lower food consumption in treated groups Higher food consumption Increased survival in treated groups Decreased survival

Increased incidence of tumour and associated non-neoplastic changes not seen with other compounds of same class Increase in rare tumour

Increase in common tumour

Increase in tumours in mouse liver Source: Reprinted from Ref. 20.

Clear carcinogen with probable relevance to humans. Review genotoxicity data Equivocal result: mechanistic studies may resolve this issue. Review genotoxicity and ADME data and all non-neoplastic pathology Possible nongenotoxic, species-speciﬁc mechanism. Mechanistic studies should demonstrate (non)-relevance to humans. Results of routine toxicity studies may show evidence of early change in the affected tissue. Tumour increase is often associated with non-neoplastic change predisposing to tumour formation. Possible class effect. Established classes of chemical and effect, e.g., peroxisome proliferation. MTD may not be achieved leading to doubtful regulatory acceptance; a 10% decrease in bodyweight gain due to reduced food consumption is not evidence of MTD unless backed up by pharmacokinetics and/or metabolism. Presence of excessive pharmacology at higher doses may be a factor. Leads to lower tumour burden and increased life span through dietary restriction. Possibly due to poor palatability of diet if test substance offered with feed Increased tumour burden and reduced survival Longer exposure may lead to different tumour burden of routine tumours in comparison with controls Tumour rates must be adjusted for mortality to account for lower numbers of animals exposed for full test duration. If this is conﬁned to high dose, this may be due to differential toxicity expressed only at high doses. Survival below 50% or 25 animals at completion of the study may invalidate the results for regulatory authorities. Compare pharmacokinetics of other compounds from same class; achieving similar levels of exposure may show similar histopathological changes indicating a class effect. Differential metabolism may be a factor. Is the tumour in the high dose only? Is there a mechanistic explanation that is not applicable to humans? How recent and extensive is the background data at the test facility? Was this seen with other compounds of the same type? How frequent is this tumour in other historical control databases? Is the incidence within the historical control range? Is there a shorter or longer time to onset or is there a difference in survival between the groups? Dose response? May not be relevant to humans as the mouse liver is sensitive to nongenotoxic compounds.

Interpretation: Different Data Types

275

Table 9 Factors to Consider in Environmental Toxicology Controls

Normality Population dynamics

Measured parameters Observed differences Transient excess mortality

Are the controls correctly chosen and deﬁned? If an area is selected as a control, is this area truly comparable with the study site? How is normality or expectation deﬁned and how recently was this deﬁnition produced? Populations change naturally in the absence of effect from synthetic chemicals and this may mask or enhance ecotoxicological differences. Population balance may be disturbed by factors outside the deﬁnition of the study limits. Was the correct parameter chosen for measurement—variability, normal levels, ease of measurement, and relevance? Are these direct or indirect? Are they (a) real or (b) relevant? Was the period of record long enough to show effects that may have persisted beyond the study period? What were the effects of concurrent disease and increased susceptibility to subsequent disease? What is the differential mortality between polluted and nonpolluted areas?

Source: Reprinted from Ref. 20.

Ecotoxicology, by contrast, can be taken to include effects on other fauna and ﬂora and their environment (the ecosystem), although the studies may well be similar to epidemiology, in that they concentrate on a single species. The presence of effects in humans due to pollution does not rule out effects on the local fauna and ﬂora. In reports of smogs in Los Angeles or London, there are very few references to the effects on the urban wildlife. However, although there may be few reports of wildlife effects, it is counterintuitive to infer an absence of toxicity when such far-reaching human effects were seen. Experimental ecotoxicology tests—of the type carried out to support registration of chemicals such as pesticides—produce data that follow similar rules of interpretation as for other toxicity studies. With single-species studies conducted in laboratory conditions, the data have to be extrapolated to the ecosystem or environment as a whole in much the same way that single-tissue studies in vitro have to be extrapolated to the whole organism and with the same uncertainties and weaknesses. Understanding the dynamics of the test environment and study apparatus is an essential for correct interpretation and subsequent efforts to predict ecotoxicity. Mesocosm tests based on replicas of ecosystems or parts of ecosystems may give a better insight into effects based on interrelationships between different fauna and ﬂora. In all cases, it is important to deﬁne exposure and to chart distribution of the test chemical through the environment and then to follow its sequestration or elimination and to link this to the presence or absence of effect. One aspect of mesocosms is that the inherent variability increases with the complexity of the experiment. As a result, normality is more difﬁcult to deﬁne. It is possible that clear-cut effects seen in the laboratory may be lost in the wider variation possible

276

A Guide to Practical Toxicology 2nd Edition

in a mesocosm experiment. At least with a mesocosm study the source of all the components should have been characterized before they were added to the system. With a ﬁeld study, this is less feasible but characterization of the components must be as scrupulous, to avoid masking of treatment-related differences which might confound interpretation. When an unexplained environmental effect is observed, there are similarities with the problems encountered in epidemiological studies. These include poor deﬁnition of exposure, difﬁculty of choice of controls and a multiplicity of interrelationships, and dependencies that complicate interpretation. One of the ﬁrst questions to be answered relates to exposure to synthetic chemicals, which may be previously identiﬁed markers of exposure or effect. Analysis of relevant tissues, corpses, soil samples, or whatever sample is appropriate or available for chemicals is a speciﬁc indicator of exposure. One problem with such speciﬁcity is the greatly increased sensitivity of analytical technique. Presence at low levels is not necessarily causative and it must be decided if a chemical is present in sufﬁcient quantity to be responsible for the observed effect. This is not always cut and dried. At one time, Americans contained quantities of DDT, but this was not linked to signiﬁcant toxicity in the population as a whole, probably because most was sequestered into adipose tissue. One reason for the absence of human effect is speciﬁcity of toxic mechanism; another is the usual epidemiological difﬁculty of assigning cause and effect in conditions that are widely present in the general population. In predatory birds that showed eggshell thinning in response to accumulation of DDT up the food chain, it was found that a metabolite, DDE, reduced calcium deposition in the eggshell; this has so far not been a signiﬁcant problem in Americans. Although markers of effect may also be indicative of exposure to a xenobiotic or environmental factor, they are not necessarily speciﬁc and the question has to be asked—“were the markers relevant?” As with epidemiological studies, it is important that a proposed cause and effect be linked by a credible toxicological mechanism, otherwise other causes should be considered. Population decline, which can be a ﬁrst indication of an ecotoxicological effect, may be due to a variety of causes such as reproductive failure or incapacity, habitat destruction, and direct toxicity, among others. Accumulation of toxins in the study population in comparison with suitable controls from a similar location is a good indication of cause, but it must be considered that such accumulation could be responsible for a different effect than the one being studied. Populations are dynamic and can respond to changes in pollutant levels quite quickly; this can make interpretation of studies carried out in successive breeding years much more complex. Any ecosystem is subject to a range of pressures and changes in species distribution and population are likely to be inﬂuenced by more than one simple factor. In the Great Lakes, populations of ﬁsh-eating birds have been affected by DDT-induced eggshell thinning, changes in ﬁsh populations in terms of numbers and species due to ﬁshing practices, and habitat; these various factors have worked together or independently to make year-to-year comparisons more difﬁcult.

Interpretation: Different Data Types

277

Data sets that accumulate following known pollution events such as oil spills or high concentration chemical releases into rivers pose their own particular challenges. The ﬁrst of these is that a trustworthy preincident characterization of the local ecosystem is not always available. Spillage into a bay with low tidal exchange of water may mean that the effects will be localized and comparison with nearby or similar sites may be possible. Release into a river can be associated with long-distance transport of pollutants, as has been illustrated in the Rhine on at least two occasions. Interpretation of all such data is dependent on prior knowledge of the affected areas; the discovery of a difference from expectation does not necessarily imply relationship to recent high-proﬁle pollution. Chronic low-level release—leakage from old mining activities or water reservoirs for holding washings from mines—is likely to have as signiﬁcant (but possibly more insidious) effects as sudden release in large amounts. Furthermore, such low-level release may not become evident until long after the pollution started. One challenge is that a pollution incident seldom provokes only one study and that the data from different studies may not be collected in a manner that allows easy comparison of results or pooling of data to enable more powerful analysis. Uncoordinated study can simply lead to a larger database that is not conclusive. Epidemiology and Occupational Toxicology The differences between epidemiological and occupational toxicology, which are in some ways different parts of the same ﬁeld, are subtle and relate in large part to the size and deﬁnition of the population under study. Both involve the study of chemically induced effects in populations, the epidemiological population usually being larger and more diverse than a worker group. This may be summed up by the difference between the workers in a chemical facility and the effects of discharge from the same facility on the surrounding community. The difference is also exempliﬁed by smoking and vinyl chloride. The former investigation involved the population at large and in the latter a small, deﬁned group of chemical workers was examined. The overlap between the two disciplines occurs at the point where a small group becomes a population—a community versus small focused groups of workers in an occupational setting. Epidemiology tends to highlight an effect after it has happened, as was the case with asbestos, rather than indicate its probability beforehand. It is often a retrospective tool, although prospective studies are undertaken. In both areas, it is important to ensure that the correct comparators are used with avoidance, as far as possible, of confounding factors such as the healthy worker effect, where workers tend to be healthier than the general population (Table 10). Investigation in a wider context may be complicated by small differences from controls and differences in protocol. In the examination of the inﬂuence of the Mediterranean diet on longevity and health, there have been suggestions that the genetics of the local population may be a signiﬁcant factor and that the inﬂuence of olive oil and red wine may be less than hoped for by interested parties.

278

A Guide to Practical Toxicology 2nd Edition

Table 10 Factors in Epidemiology and Occupational Toxicity Controls Confounding factors

Faulty or inconsistent differential diagnosis

Questionnaire Deﬁnition of exposure

Biological markers

Statistical signiﬁcance

Data accessibility Signiﬁcant contributing factors not considered

Healthy worker effect. Population chosen—inﬂuence on study outcome Alcohol, smoking, and occupational exposures. Effects that are synergistic or additive to that of the investigated substance. Poor distinction between conditions having similar symptoms but different etiology, e.g., bronchitis may be bacterial or viral or associated with smoking, atmospheric pollution, or occupational exposure If questionnaires were used for data collection, was the wording structured so as to avoid bias? In epidemiology by history of persons; in occupational toxicology by personal monitoring equipment and by urine and blood collection for analysis Is the chosen marker speciﬁc for the chemical of concern or for the same group, e.g. cholinesterase inhibition. Is it a measure of exposure or effect or susceptibility? Spurious signiﬁcances due to numbers of relationships being examined in some studies–leads inevitably to a number of false positives In some data sets there is a temptation to collect and analyze only the more easily accessible data; this can lead to bias Genetics, lifestyle, intercurrent disease. Recent papers have suggested that the greater survival seen with the Mediterranean diet may be due to genetic factors

Source: Reprinted from Ref. 20.

Clearly, a lot more research is needed here, conducted locally in appropriately smoke-free bistros. Epidemiology In contrast to laboratory toxicology, epidemiological study is conducted in the ﬁeld with a diverse population in which the exposure is often poorly deﬁned and outcome is often compromised by other factors such as smoking or alcohol. Good epidemiology is dependent on rigorous control of variables and of confounding factors that may invalidate the conclusions if not fully appreciated and allowed for. Thus, in a study of respiratory disease, due to an occupational hazard, smoking could be expected to inﬂuence the results and is therefore a confounding factor. Because the natural variability among humans is so large, it is difﬁcult to detect minor deviations from controls without using vast numbers of subjects. Epidemiology is therefore good for detecting clear effects that may be associated with exposure to a speciﬁc substance. Clarity of effect may be due to rarity of the observed disease or to numbers affected. Thus, cause and effect linkage of

Interpretation: Different Data Types

279

vinyl chloride with hepatic hemangiosarcoma was made easier by the rarity of the tumour and the distinct population in which it was seen. The importance of numbers is illustrated by the association of smoking and lung cancer, which has been taken further to show that smoking exacerbates respiratory disease in occupational exposure to asbestos or in uranium mining. For “normal” diseases such as leukemia, variation from normality is more difﬁcult to deﬁne, especially as the human population tends to be naturally inhomogeneous. The result of this inhomogeneity is the presence of clusters of diseases in particular areas, for example, a high incidence of meningitis in some villages or the presence of leukemia clusters around a nuclear plant. The normal presence of a disease in a population makes it extremely difﬁcult to separate low-level effect, which might be due to exposure to a chemical, from normal variation. One product of this uncertainty is often a succession of studies, each seeming more authoritative than the last and each with a different conclusion. For many years, it has been considered that all alcohol should be avoided in pregnancy because alcohol in large amounts has been clearly associated with fetal alcohol syndrome; recently, it was suggested that small amounts might be beneﬁcial. Currently, the pendulum has swung the other way. Equally, it has long been suggested that saturated fats should be avoided in favor of polyunsaturates; then it has been countersuggested that too much polyunsaturated fat is not good. Although it would seem sensible to take all the data from all the studies and pool it to establish the cause of the effect or correctness of attribution, this is usually made difﬁcult or impossible by variations in experimental technique, population differences, differing criteria for differential diagnosis, etc. Establishment of a relationship between cause and effect by epidemiology is dependent on comparison of an exposed population or one showing the effect with a control that is unaffected or unexposed to the chemical or agent of interest. Correct choice of controls is crucial as they are the “normal” population against which the test group will be compared. If you are looking at minor differences between individuals or study groups, the deﬁnition of normality is very important. Move the normality goalposts and the conclusions will change. Where the condition investigated in epidemiological studies is associated with a naturally existing background incidence or with a wide range of values, it is quite possible to have different studies indicating different and opposite effects. The inﬂuence of interest groups is also a factor to consider. The information that red wine is good prophylaxis against cardiovascular disease was good news for the red wine producers of Bordeaux but less wonderful for white wine sales. Within a relatively short time, a study emerged showing the beneﬁts of white wine. Another example of contradictory epidemiological study results is provided by examination of the relationship between electromagnetic radiation from power lines and leukemia in children. In this work, the deﬁnition of the exposed population varied between studies, some including houses up to 100 m either side of the power lines while others used a smaller distance. Lack of comparability between study protocols made an overall assessment of the data impossible, leaving little

280

A Guide to Practical Toxicology 2nd Edition

scientiﬁc proof but a lingering public perception that they had been misinformed or led astray. The absence of any mechanism by which the leukemia could be induced was also a crucial weakness. In the ﬁnal analysis, no amount of epidemiological research into a fuzzy problem will overcome public perception. The most contentious aspect of epidemiology is the interpretation of small differences from expectation or controls. This is seen with conditions or events that have a signiﬁcant natural background incidence in populations or environments that are inherently variable and often poorly controlled. This leads to poor reproducibility of results from one study to the next, interpretation of which is made more difﬁcult by differences between protocols and chosen populations. These methodological differences reduce the extent to which data can be pooled for extended analyses of the whole database. It is only when associations are very strong that the results of epidemiological study are accepted with anything resembling speed. The postulated decline in sperm counts in response to environmental estrogens is a case in point. Interpretation has been hampered by analysis and reanalysis of data with conﬂicting results, variability in sperm counts due to seasonal factors, donors, health, occupation, counting techniques, and sample quality. Although there may be, intuitively, a toxicological mechanism that can be held responsible, the differences from controls have not been large enough to satisfy epidemiologists of cause and effect. The overriding problem here is the variation that is inherent in the population and the consequent inability to produce a sufﬁciently robust deﬁnition of normality. A crucial task for epidemiological toxicologists is the deﬁnition of the extent and duration of exposure to the chemical of concern. Human life is seldom challenged by a single chemical at high doses, but is subject to exposure by a mixture of many chemicals at individually low doses, although the total exposure may be huge when expressed in milligrams per day. In general, mixtures, especially undeﬁned mixtures, are much more difﬁcult to assess due to antagonistic and synergistic interactions of the various components. The effects of oxidative attack by chemicals, present naturally or as contaminants in the environment, can be offset by high levels of dietary antioxidants, absorption of which may itself be compromised by the presence or absence of other dietary components. Added to this is the problem that disease is seldom an immediate response to exposure, although asthma and other allergies are notable exceptions to this. The time lapse between exposure and response, especially to long-term (chronic) lowlevel exposure, makes attribution nearly impossible unless the response is unusual or rare. Therefore, it is generally not possible to ascribe a common tumour such as breast cancer to a speciﬁc cause in a patient for whom there is no predisposing exposure deﬁned. In contrast, despite the long latency period, it is relatively straightforward to ascribe mesothelioma to occupational exposure to asbestos because it is rare tumour found in an easily characterized population. One approach is to use the concept of excess mortality. That is, in speciﬁc conditions, it may be possible to attribute deaths above the normal rate to those conditions. In smogs in London in 1952, the number of excess deaths attributable to the atmospheric

Interpretation: Different Data Types

281

conditions was calculated up to December of that year. However, if the excess mortality ﬁgures are plotted into the following months, the number of deaths that may have been due to the initial smog increases signiﬁcantly (7,8). A challenge for epidemiologists, therefore, is knowing where to draw a line between clear toxic effect and normal background and showing when change from normality is due to toxicity. Occupational Toxicology While epidemiological data may relate to hundreds of people, the occupational toxicologist may be presented with data from a single individual, for instance, DNA-adduct analysis in the urine of an employee handling a potentially reactive chemical. Unless the difference from expectation is large, interpretation of a single data point is difﬁcult. Ideally, there should be baseline data from the same individual before exposure took place or from unexposed workers in the same plant or area. It should be possible to chart the exposure from baseline and start of work, to abnormal DNA-adduct levels during work, and then a return to normal when the shift stops. Before any trustworthy assessment is attempted, it must be conﬁrmed that the increase in DNA adducts is not only a marker for exposure but also for the adverse effect attributed to the chemical being handled; without this vital linkage being made, valid conclusions cannot be drawn. One of the principal advantages that an occupational toxicologist has over an epidemiologist is the relative strength of deﬁnition of exposure that is available in the workplace, in terms of identity and, often, of dose. In either ﬁeld, the criteria for attribution include deﬁnition of exposure, exclusion of confounding factors, a clear signiﬁcant connection between exposure and condition, and a supportable mechanistic explanation. With such data to hand, it should become possible to attribute an individual case or group of cases to a particular cause. The conﬁdence with which this can be done becomes critical when there is a legal case to answer, especially in occupational health cases. When attempting to interpret the relationship between exposure to a particular chemical and effects in the workplace, it is important to consider alternative sources of exposure to the substance of interest. For example, formaldehyde, a commonly used chemical, has a wide presence in the home, in carpets, furniture, clothing, and home insulation products. Other factors must be considered, for example radon, smoking, and other agents such as diesel exhausts may make a synergistic or additive contribution to the incidence of lung cancer in underground miners. When these additional external factors are taken into consideration, it should be possible to draw a conclusion as to whether the cancer is connected with occupational exposure to the chemical. For individual cancers, which are not part of a group or speciﬁc to a particular agent, it is highly unlikely that a connection between it and a speciﬁc exposure can be drawn. In contrast to epidemiology, interpretation of effects in the workplace may be facilitated by the relative certainty of what the exposure was, the presence

282

A Guide to Practical Toxicology 2nd Edition

(usually) of a condition in a speciﬁc group of workers, and the timing of effect in the affected individuals. Thus, response to a chemical in the workplace may be seen at a higher level or incidence toward the end of the working day or at particular times or during particular processes and may resolve at weekends. Ventilation, especially the recirculation of air in new buildings, is an important consideration and can be associated with sick building syndrome. Biological markers are an essential tool of the occupational toxicologist, but, as with all tools, their limitations have to be accounted for in interpretation of their data. The basic contention is that exposure to a chemical is associated with change that may be seen as variations in the concentration, expression, or activity of a biological marker. This type of change, which in all probability is subclinical in the early stage of exposure, may lead to organ dysfunction later in life, with associated clinical consequences. If levels of the biological marker are monitored, preemptive action may be taken to prevent further exposure. From the data, it should be feasible to extrapolate backward to the exposure and forward to the prospective clinical outcome. In order to be of use in the investigation of potential effects, biological markers should be as speciﬁc as possible to the chemical of concern. In essence, they are markers of exposure, effect, or susceptibility to effect. The most speciﬁc marker available is analysis of blood or urine for the presence of the chemical or its metabolites. Certain markers of effect are speciﬁc for particular groups of chemicals, such as inhibition of acetyl cholinesterase due to exposure to organophosphate or carbamate insecticides. Other markers, such as DNA adducts, are produced by a wider range of chemicals and are not peculiar to any single chemical unless speciﬁcally identiﬁed as such. Once a biological marker has been validated as being speciﬁc or indicative for exposure to a particular chemical or type of exposure, it should be possible to interpret data from individuals. A change in the value for a marker from baseline for that individual (beyond normal variation) or from general expectation indicates excessive exposure and the possibility of subsequent clinical effects if exposure is not minimized or halted. In validating biological markers in animal experiments, it should be remembered that the thresholds of toxicity may differ between the experimental animal and humans; this is especially signiﬁcant if humans are more susceptible than the test animals. There should be interactive interpretation between toxicology and epidemiology. Increasing use of biological markers should encourage the interaction between the two disciplines through consideration of toxicological sequelae of exposure and the mechanism of effects attributable to chemicals.

CASE STUDIES The following two case studies – ciproﬁbrate and genetically modiﬁed potatoes – are a little elderly but nevertheless illustrate two approaches to interpretation—a right way and a wrong way. In addition, the ﬁrst case also illustrates an excellent

Interpretation: Different Data Types

283

investigative strategy and is a powerful answer to the accusation that can be made (especially in pharmaceutical development) that toxicology kills good compounds. Ciproﬁbrate Ciproﬁbrate, a derivative of phenoxyisobutyrate, is one of a series of hypolipidemic compounds (ﬁbrates), which includes cloﬁbrate, bezaﬁbrate, and fenoﬁbrate. All have marked hypolipidemic activity in humans and animals, reducing both plasma cholesterol and triglycerides through effects on low or very lowdensity lipoproteins. The animal toxicity of ﬁbrates has been reviewed by Bonner et al. (9). They are well known as peroxisome proliferators, an effect that is known to be associated with hepatocarcinogenicity in rodents; the class as a whole is nonmutagenic. The safety evaluation program for ciproﬁbrate, which was conducted in the light of previous work on earlier members of the series, showed up a number of toxicities in rodents, which required explanation. These consisted primarily of liver changes, with associated effects in the thyroids and the presence of a low incidence of carcinoid tumours in the glandular mucosa of the rat stomach. Peroxisome proliferation was noted in both rats and mice (10) together with increased liver size. This was associated with hepatic adenomas and hepatocellular carcinomas, which were seen in the long-term carcinogenicity studies. There were also functional and morphological changes in the thyroid of rats (11,12), which were associated with decreased plasma concentrations of thyroxine (T4) and with minimal-to-mild thyroid follicular hyperplasia. The morphological changes were considered to be consistent with increased thyroid activity. Increased metabolism of thyroid hormones as a result of hepatic enzyme induction is often associated with increased plasma concentrations of TSH as a result of the absence of the negative feedback provided by normal T4 or T3 levels (see earlier). Although TSH was shown to be increased over short administration periods, this was not demonstrated in longer studies, a situation that is not unusual due to compensatory mechanisms. To demonstrate the rodent speciﬁcity of the hepatic effects, a long-term study in marmosets showed a lack of peroxisome proliferation; although liver changes were seen, these were an order of magnitude lower than in the rat (13). In view of the long-standing association of peroxisome proliferation with hepatocarcinogenesis and of hepatic enzyme induction with thyroid change, these various effects were not unexpected. They are known to be speciﬁc to rodents and to have no relevance to humans, a point underlined by the absence of effect in the marmoset. Although the liver and thyroid effects were expected and explainable, the presence of carcinoid tumours in the glandular fundus of the stomach of Fischer rats posed a problem that was potentially more serious. The incidence of gastric carcinoid tumours was 5/59 males and 1/60 females seen in animals that survived for the whole study at 10 mg/kg/day in the diet. Marked hyperplasia of fundic neuroendocrine cells was seen in non-tumour-bearing animals of this group with

284

A Guide to Practical Toxicology 2nd Edition

other changes in microscopic gastric morphology. These changes were not seen in the mouse and were not reported with other ﬁbrates. However, this type of carcinoid tumour had also been seen with long-acting gastric antisecretory compounds such as omeprazole. An investigation was mounted to discover whether there was a secondary pharmacological action of ciproﬁbrate on gastric secretion and to determine the sequence of events in tumour formation. Two other objectives were to look for this effect in other species and to ask if other ﬁbrates had the same effects. The duration of antisecretory activity is proportional to the likelihood of tumour formation. Thus, the long-acting H2–antagonist loxtidine and proton pump inhibitor omeprazole have both been associated with gastric carcinoid formation. Shorter acting compounds such as cimetidine, in once-daily regimens, are not associated with this change. Following treatment of rats with ciproﬁbrate, changes were seen in the acidsecreting oxyntic cells—hypertrophy, with eosinophilia and reduced vacuolation of the cytoplasm, associated with reduced secretory cell organelles. In separate studies, ciproﬁbrate was shown to decrease acid secretion and the volume of gastric juice, an effect that was also shown with other ﬁbrates. However, in a 26week comparative study with once-daily dosing of bezaﬁbrate in rats, no similar changes were seen. Investigation of the pharmacokinetics of the two compounds (14) showed that the elimination half-life of ciproﬁbrate was signiﬁcantly longer than for bezaﬁbrate—3 to 4 days and 5 hours, respectively. To reproduce the systemic exposure pattern for ciproﬁbrate, bezaﬁbrate was administered twice daily at 12-hour intervals; this was successful in producing similar changes to those seen with ciproﬁbrate given once daily. Furthermore, ciproﬁbrate given at 10 mg/kg every 48 hours gave similar sustained plasma concentrations to those produced by bezaﬁbrate given at 125 mg/kg every 12 hours. Gastrin stimulates acid secretion, with low gastric pH acting as a negative feedback mechanism. It is also involved in regulation of mucosal growth and exerting a trophic action on neuroendocrine cells. Reduced acid secretion can therefore lead to hypergastrinemia, which, if sustained, may produce neuroendocrine cell hyperplasia in the gastric mucosa. Ciproﬁbrate given at 20 mg/kg/day to rats gave a modest but statistically signiﬁcant hypergastrinemia over a period of 56 days. Investigation of other ﬁbrates showed that twice-daily administration of bezaﬁbrate at 150 mg/kg also produced increased plasma levels of gastrin after 12 weeks. Cloﬁbrate twice daily at 75 mg/kg was shown to have similar effects. That these changes in gastrin concentration were dependent on pharmacokinetics was illustrated by the ﬁnding that ciproﬁbrate given once every 48 hours at 20 mg/kg produced less hypergastrinemia than with daily dosing. Morphologically, 6 to 9 months treatment two or three times daily with bezaﬁbrate or cloﬁbrate at up to 150 mg/kg produced similar changes in neuroendocrine cells in the stomach to those seen with ciproﬁbrate, consistent with prolonged mild hypergastrinemia. The species speciﬁcity of the changes in gastrin concentrations was examined in mice and marmosets. While mice showed a transient increase in plasma gastrin concentrations, this was not sustained and there was no evidence of change

Interpretation: Different Data Types

285

in the morphology of the gastric mucosa. These ﬁndings are consistent with the absence of gastric carcinoids from the 2-year carcinogenicity study in mice. Similarly, there was no change in plasma gastrin level in the marmoset over a 26-week treatment period. Although there were some minor changes in the oxyntic cells in marmosets after 26 weeks of treatment at 100 mg/kg, there was no evidence of change in the neuroendocrine cells. In addition, hypergastrinemia was not seen in humans. A hypothesis was constructed that prolonged antisecretory activity induced by ciproﬁbrate (in contrast to the transient effect seen with bezaﬁbrate and cloﬁbrate in once-daily dosing regimens) led to hypergastrinemia and a persistent trophic stimulus with hyperplasia of the neuroendocrine cells. This latter effect is responsible for the gastric carcinoid tumours seen in rats. Prolonging the antisecretory activity of bezaﬁbrate and cloﬁbrate by twice-daily administration leads to similar effects as seen with ciproﬁbrate. From this case study, it may be seen that rapid clearance of drugs can mean that toxicity is not manifested and that toxic potential is not predicted adequately. Determination of the duration and consistency of exposure is critical in the interpretation of the data and this should be correlated with the pharmacodynamics of the compound. Persistence of an otherwise easily reversible change, as seen with the ﬁbrates and hypergastrinemia, may lead to unexpected effects that have signiﬁcance for the development of the compound. Equally, it is important to look at the species speciﬁcity of these changes to assess their relevance to the ultimate target species, which is usually humans. In terms of interpretation, it is clear from this investigation that, at each stage, consideration of the accumulating data and of relevant literature allowed a logical progression of studies and a solidly based interpretation of the ﬁndings when the process was complete. Genetically Modiﬁed Potatoes Whereas the investigation of ciproﬁbrate was a carefully conducted evaluation of its safety, with a speciﬁc goal in mind, many toxicological data sets do not arise from such carefully coordinated programs. Instead, knowledge bases on particular compounds or chemical classes tend to accumulate as research in different laboratories continues. The challenge for interpretation is that the various research programs contributing to the database, may develop at best on parallel lines, making for a heterogeneous data set, within which cross-comparison becomes difﬁcult. There is a considerable temptation to interpret individual studies in isolation and without due consideration of any weaknesses in their design and execution. This is exempliﬁed by some investigations in animals into the effects of high concentrations of normal components of the human diet (see Box 2, chapter 1). Many chemicals naturally present in our diet are potentially toxic, in accordance with Paracelsus’s dictum that everything can be a poison if the dose is high enough. The problem with the study of these chemicals is encapsulated by the consideration that the most appropriate route of administration is in the diet.

286

A Guide to Practical Toxicology 2nd Edition

However, it is difﬁcult to give the very high doses that are necessary to evoke toxicity without distorting the dietary composition to the extent where nutritional imbalance becomes a confounding factor. Although gavage administration may facilitate higher dose levels, the formulation is unlikely to be representative of the normal diet, which is a complex mixture that has far-reaching effects on the absorption of chemicals. Studies using the drinking water are compromised in a similar manner and are additionally subject to the inherent uncertainty of calculation of achieved dose levels. Potatoes have been a focus for toxicological interest for many years. They are from the same family of plants as deadly nightshade and contain related alkaloids such as solanine, which is found particularly in the green skin of potatoes that have been exposed to light. A review by Christie (15) suggested that many cases of schizophrenia might be associated with consumption of potatoes. A selection of the alkaloids present in potatoes was assessed in the Xenopus assay in vitro for teratogenesis (16) and their potential for teratogenicity was conﬁrmed. The general toxicity of solanaceous alkaloids is well known. In other words, potatoes are a typical dietary constituent in that administration to animals of certain natural components at high-dose levels could be expected to be associated with undesirable effects. The addition, by genetic modiﬁcation, of a new chemical entity to this existing cocktail could be expected to be of toxicological interest, depending on the expression levels and ﬁnal content in a normal diet. Genetic modiﬁcation of food plants has caused a storm of controversy in recent years, as debate has raged over their potential effects on human health and the environment. Induced expression of compounds that may increase resistance to insects, and so reduce the amounts of damage caused during growth or storage, has been a particular bone of contention. Accordingly, there was considerable debate about an experiment in rats given diets containing genetically modiﬁed potatoes, which was published and reviewed in the Lancet in 1999 (17–19). This work examined potatoes that had been genetically modiﬁed to express a snowdrop lectin (Galanthus nivalis agglutinin) to reduce damage from insects and nematodes. Lectins are a group of proteins and glycoproteins that can bind speciﬁc carbohydrates, such as mannose. They are present in numerous plants and include ricin and the toxic component of uncooked red kidney beans. They have known effects on the morphology of the small intestine and combination of lectins with receptors in the intestine wall may result in inhibition of use of some nutrients. In this contentious experiment, groups of six rats (their age and sex were not speciﬁed in the Lancet report) were fed nongenetically modiﬁed potatoes, raw or boiled genetically modiﬁed potatoes, or raw or boiled nongenetically modiﬁed potatoes that had been supplemented with the lectin. The composition of the diets was not given, beyond indicating that they contained 6% protein and had the same energy levels. However, low-protein diets are associated with reduced growth and impaired liver metabolism and immune function. The diets were fed to the rats for 10 days, after which they were killed and the gastrointestinal tracts examined. Changes that were seen were attributed to the presence of the added

Interpretation: Different Data Types

287

lectin; however, these were consistent with the known gastrointestinal effects of lectins. Kuiper et al. point out that cecal hypertrophy, seen in this experiment in rats fed raw potatoes, is a common response in rats fed poorly digestible carbohydrates such as potato starch. The study was imperfectly controlled as there were no animals in the experiment that received a normal diet and the effects of a low-protein diet in rats of the same strain and age were not examined. Thus, there was no indication of what constituted the normality against which the changes could be assessed. The changes seen, which were assessed principally by crypt length, were of the type that is likely to be readily reversible on cessation of treatment. Because the experiment lasted only 10 days, the chronic effects of such high-level dietary inclusion were not investigated. There was no attempt to deﬁne the dose–response relationship and so to assess the presence of no effect levels. Finally, the relevance of feeding raw potato should be questioned as this is not representative of normal human dietary practice. Although it might be possible to say that the inclusion of the lectin or the genetic construct caused changes in the gastrointestinal tracts of the rats, it was not possible to make a scientiﬁc assessment of whether this result was signiﬁcant for human consumers. To do that, it would be necessary to conduct a properly designed longer study in male and female rats with different levels of treatment. This type of study is always difﬁcult to design and interpret because at abnormally high inclusion levels of any dietary component the response of the animals becomes clouded by the fact that they are receiving an abnormal diet. It is usual to restrict non-nutrient components of experimental diets to 10% or less. This work demonstrates the dangers of making sweeping interpretative conclusions from imperfect information. The study was potentially useful as a preliminary experiment but should in no way be considered deﬁnitive. In particular, it is impossible to draw secure conclusions from the data from such an experiment; the toxicological signiﬁcance of the changes seen could not be assessed in such a design. Interpretation of the ﬁndings was not sensible without further work and it is certainly not sensible to draw any conclusions related to the relevance of the ﬁndings to humans. The only conclusion that can be drawn from this study is that further work might be of interest. THE FUNDAMENTALS OF INTERPRETATION The following are suggested as a basic set of rules for successful interpretation of toxicological data: r The whole picture is needed for secure conclusions to be drawn. r A deﬁnition of normality, provided by adequate controls or historical control data, is essential. r The experimental protocol must be sufﬁciently robust to achieve the stated experimental objectives.

288

A Guide to Practical Toxicology 2nd Edition

r Demonstration of exposure—duration and extent—is essential. r Confounding factors due to husbandry or experimental technique or procedures must be excluded or accounted for. r Do not overinterpret or extrapolate from small or poorly controlled data sets. r In the immediate aftermath of a crisis or incident, it is difﬁcult to achieve correct interpretation, as data will continue to emerge as the situation progresses. r Above all, you cannot interpret the data unless you understand what they mean. When you know the meaning of the results, it should be possible to interpret them and then to perform an extrapolation to humans. Interpretation is an evolutionary process and is supported by appropriate additional experiments to test developing hypotheses for mechanism of effect and species speciﬁcity. From this basis, it should be possible to perform a prediction of the compounds toxic potential in humans and this is addressed in the next chapter; needless to say, the bedrock of an accurate prediction is secure interpretation of the full set of toxicity data and all other supporting information.

References 1. ICH. Harmonised tripartite guideline: Safety pharmacology studies for human pharmaceuticals S7a. November 2000. Available at www.ich.org. 2. Redfern WS, Carlsson L, Davis AS, et al. Relationships between preclinical cardiac electrophysiology, clinical QT interval prolongation and torsade de pointes for a broad range of drugs: Evidence for a provisional safety margin in drug development. Cardiovasc Res. 2003; 58(1): 32–45. 3. Gopinath C. Comparative endocrine carcinogenesis.In: Harvey PW, Rush KC, Cockburn A, eds. Endocrine and hormonal toxicology. Chichester: Wiley, 1999. 4. Capen CC. Toxic responses of the endocrine system. In: Klassen CD, ed. Casrett & Doull’s toxicology—the basic science of poisons, 6th edition, New York: McGrawHill, 2001. 5. Grasso P. Essentials of pathology for toxicologists. London: Taylor and Francis, 2002. 6. Kirkland DJ, Muller L. Interpretation of the biological relevance of genotoxicity test results: The importance of thresholds. Mutat Res. 2000; 464(1): 137–47. 7. Bell ML, Davis DL. Reassessment of the lethal London fog of 1952: Novel indicators of acute and chronic consequences of acute exposure to air pollution. Environ Health Perspect. 2001; 109(suppl 3): 389–394. 8. Izzotti A, Parodi S, Quaglia A, et al. The relationship between urban airborne pollution and short-term mortality: Quantitative and qualitative aspects. Eur J Epidemiol. 2000; 16(11): 1027–1034. 9. Bonner FW, Eason CT, Spencer AJ. Phenoxyisobutyrate derivatives: A review of animal toxicity. Res Clin Forums. 1990; 12(1): 23–45. 10. Rao MS, Dwivedi RS, Subbarao V, et al. Induction of peroxisome proliferation and hepatic tumours in C57BL/6N mice by ciproﬁbrate, a hypolipidaemic compound. Br J Cancer. 1988; 58(1): 46–51.

Interpretation: Different Data Types

289

11. Bonner FW, Deavy L, Astley N, et al. Investigation of the mechanism of ciproﬁbrate induced thyroid hyperplasia in the rat. Proceedings of the 30th Annual Meeting of the Society of Toxicology. The Toxicologist. 1991; 11: 152. 12. Spencer A, Eason CT, Pattison A, et al. Functional and morphological changes in the thyroid gland of Fischer 344 and Sprague-Dawley rats given bezaﬁbrate and ciproﬁbrate. Hum Toxicol. 1988; 8: 400. 13. Graham MJ, Wilson SA, Winham MA, et al. Lack of peroxisome proliferation in marmoset liver following treatmnet with cirpoﬁbrate for 3 years. Fundam Appl Toxicol. 1994; 22: 58–64. 14. Eason CT, Powles P, Henry G, et al. The comparative pharmacokinetics and gastric toxicity of bezaﬁbrate and ciproﬁbrate in the rat. Xenobiotica 1989; 19(8): 913–925. 15. Christie AC. Schizophrenia—is the potato the environmental culprit? Med Hypotheses 1999; 53(1): 80–86. 16. Friedman M, Rayburn JR, Bantle JA. Developmental toxicity of potato alkaloids in the frog embryop teratogenesis assay—Xenopus (FETAX). Food Chem Toxicol. 1991; 29(8): 537–547. 17. Ewen SWB, Pusztai A. Effect of diets containing genetically modiﬁed potatoes expressing Galanthus nivalis lectin on rat small intestine. The Lancet. 1999; 354: 1353–1354. 18. Horton R. Genetically modiﬁed foods: Absurd concern or welcome dialogue? The Lancet 1999; 354: 1314–1315. 19. Kuiper HA, Noteborn HPJM, Peijnenburg AACM. Adequacy of methods for testing the safety of genetically modiﬁed foods. The Lancet. 1999; 354: 1315–1316. 20. Woolley A. A Guide to practical toxicology, 1st ed. London: Taylor and Francis, 2003.

12 Prediction of Hazard

INTRODUCTION The previous chapters have covered the background and process of testing that seeks to show differences from normality, which may represent toxicity and the interpretation of the resulting ocean of data. This chapter sets out to explore the process of hazard prediction that takes place once the results of toxicological investigations have been collated and reported. In the context of this book, it is seen as high-level interpretation of the whole data set that takes place after interpretation of individual studies, but before risk assessment and management. The emphasis here is on defensive toxicology, showing lack of relevance to humans or other target species, as that is a major driver for continuing the development of a chemical, particularly new pharmaceuticals. However, it has to be said that defensive toxicology does not mean saving a compound at any cost; clearly there is an ethical and moral line that should not be crossed. Data should be explained, not ignored or concealed. The safety evaluation studies identify hazards, which are then subjected to hazard characterization, after which it should be possible to predict which hazards are relevant for risk assessment. Inevitably there is substantial overlap between these processes. Risk assessment is carried out on one hazard at a time, and so it is important to identify and prioritize human-relevant hazards before embarking on the next stage. There are a number of settings in which this process of prediction is required, including preparation of applications for ﬁeld trials with pesticides, for ﬁrst dose in humans with novel pharmaceuticals, and when establishing best work practices with chemicals. Assessment of toxicities as relevant hazards for humans has taken on much greater signiﬁcance as the cost of chemical development has soared. Rising cost has encouraged investigation of toxicity to show lack of relevance 291

292

A Guide to Practical Toxicology 2nd Edition

to humans and to recoup the huge costs of development. As in vitro methods of investigation have improved, these investigations have become ever more focused. Frequently, these take the form of in vitro comparative experiments in which human tissues are used with tissues from the test species. If the effects seen can be shown to be irrelevant to humans, the chemical may still be worth developing, other factors being favorable. Hazard, Risk, and Human-Relevant Hazard It is important to distinguish between hazard and risk. Hazard is the description of the adverse effects of a chemical; it is not quantitative and does not take exposure, dose, or form into consideration. Risk is the probability that this hazard will occur; clearly, if there is no hazard, there is no risk. Hazards of concern to humans are broadly cancer, reproductive effects, debilitating illness, or disease and workplace-related effects that might prevent them from working. In addition, any potential progressive, degenerative change that may be due to acceleration of normal age-related decline in function should be considered. Needless to say, this type of insidiously progressive change is extremely difﬁcult to predict from toxicological data because the circumstances for each individual at risk are so different, in terms of genetics, exposure, diet, and other factors that inﬂuence individual responses. A hazard identiﬁed for animals is not necessarily a hazard for humans—for example, peroxisome proliferation, which is associated with hepatic carcinogenesis in rodents, is not considered to be a hazard for humans due to differences in hepatic metabolism. The object is to predict which toxicological effects detected in the safety evaluation have signiﬁcant potential to be expressed in humans, and so, to identify them as being relevant for the risk assessment process. This indicates the need for accuracy in prediction, as it is important that false-positives and false-negatives are avoided; the former may divert attention from real hazard and the latter may expose people to unacceptable toxicity. Hazard characterization is reliant on correct overall interpretation of the various studies and this, in turn, is dependent on the interdependent interpretation of studies within each toxicological discipline, taking account of any overlap with other areas. For instance, the interpretation of data from reproductive studies may be inﬂuenced by ﬁndings in general toxicity studies, such as testicular atrophy. It is vital, therefore, that all evidence be considered and that the interpretation of all studies is used to extrapolate a prediction of effect in the target species, which are usually humans. The case of ciproﬁbrate, given in the previous chapter, is an example of the type of stepwise approach that may be taken in assessing the human relevance of hazards identiﬁed in nonclinical studies. Another example is lamotrigine, an antiepileptic drug, which was found to accumulate in kidneys in the male rat, causing progressive nephrosis and mineralization. These effects were attributed to action on ␣2␮-microglobulin, a mechanism that is speciﬁc to male rats and

Prediction of Hazard

293

not relevant to humans. In dogs, lamotrigine is extensively metabolized to the 2-N-methyl metabolite, which is associated with dose-related effects on cardiac conduction, leading (at high doses) to complete AV conduction block. In humans, production of this metabolite (found in urine) equates to less than 0.6% of a dose (Physicians Desk Reference, 2007) and the relevance of this hazard to humans is considered to be minimal. However, it was suggested that, in patients with liver disease and/or reduced glucuronidation capacity, the concentrations of this metabolite may be increased. Circumstances of Hazard Prediction In evaluating chemicals, especially new synthetic chemicals, it is important to distinguish among hazards that are speciﬁc to the various test systems used during safety evaluation and those that might affect humans or the environment. The objective is to protect humanity, the environment, or any speciﬁc target from potential adverse effects that might arise from the use of novel chemicals. This can also apply to natural chemicals that are proposed for use in unnaturally high concentrations or circumstances. Predictions of hazard are made to support the use of new drugs in clinical trials (especially for ﬁrst administration to healthy volunteers), for pesticide ﬁeld trials, workplace exposures during production, environmental effects, and for the use of food additives. Differences in target populations may modify hazard assessment or signiﬁcance; teratogenicity is not a hazard for an exclusively male population, although many teratogens, such as thalidomide and diethylstilbestrol, also have effects on the male reproductive system. The presence of disease may modify the response to a chemical, particularly a drug. Thus, patients may beneﬁt from taking a drug but healthy workers may show an adverse response, usually an unwanted pharmacological effect. Although there are populations for which particular hazards are not relevant, factors that affect the response of the individual do not affect the relevance of the hazard, but they do modify the risk. Uranium miners are all subject to the hazard of lung cancer as a result of their workplace exposures, but for smokers the risk is much greater than for nonsmoking miners. Likewise, the toxicities expressed by slow and fast metabolizers of isoniazid may be different, but it is sensible to consider that the hazard of both is relevant to both populations of patient; it is simply the risk that is different. Prediction of hazard to the environment or the ecosystem is more complex than that for human populations as the scope for interactions is much greater. There may be some sense in drawing a distinction between an environmental hazard that affects humans directly, for example, release of estrogenic substances or discharge into drinking water, and those which affect the ecosystem as a whole. The latter will affect humanity indirectly but is likely to be much less emotive to the general population than a perceived direct effect such as cancer.

294

A Guide to Practical Toxicology 2nd Edition

PRINCIPLES OF PREDICTION There are two “simple” stages of hazard prediction, ﬁrstly, identiﬁcation of the hazard—usually from the animal and in vitro studies that are available—and then assessment of the relevance of the hazard to humans. There have been two approaches to these linked questions. The ﬁrst (and least discriminating) was that any hazard identiﬁed in animals was relevant to humans and that the second question was therefore irrelevant. It was this type of assumption that spawned the Delaney amendment, by which any substance shown to cause cancer in animals should not be allowed as a food additive in the United States. The problem with this is that practically anything can be shown to cause cancer in animals, if you are sufﬁciently dedicated and the dose levels are high enough. Such dedication has shown that a natural constituent of mushrooms, 4-hydrazinobenzoic acid, can cause tumours in mice when administered in the drinking water at high-dose levels (see Box 2, chapter 1). This might become relevant to humans if people start drinking mushroom ketchup in large quantities. The second approach weighs all the evidence and subjects it to a process of expert judgment to arrive at a conclusion as to the relevance of the changes seen. In particular, the inadequacy or appropriateness of experiments should be taken into account when assessing the data and the credibility of conclusions reached in individual studies. Data from inadequate or poorly conducted studies should carry signiﬁcantly less weight than those that are clearly robust scientiﬁcally. The terms “strength” and “weight” of evidence have been used to describe assessment approaches to data, but it is extremely difﬁcult to ﬁnd a satisfactory deﬁnition of either. In view of the ambiguity possible with the use of such similar words as strength and weight in this context, it is probably best to ignore attempts to name the process by which the data are assessed. The clear essential is that all data should be assessed for adequacy as well as for scientiﬁc content and that there should be an expert judgment of their relevance to humans. Identiﬁcation of hazard is essentially independent of dose and formulation but this must be considered within reasonable limits. Thus, for the case of 4-hydrazinobenzoic acid in mushrooms and its carcinogenicity in mice, the relevance of the hazard needs to be assessed. Given that there was a question of formulation relevance in the various studies (the material was given in the drinking water), the inadequate design of the study, and the large daily intake of whole mushrooms that would be necessary to produce tumours, it is likely that this hazard is not relevant to humans. This conclusion is supported by the absence of any epidemiological evidence of carcinogenic effect of mushrooms in humans. Although folklore cannot be considered to be scientiﬁc evidence, much is based on historic experience and it may be an indicator of effect; this may become politically embarrassing when there is public belief but no demonstrable mechanism of action.

Prediction of Hazard

295

Toxicities or hazards that are revealed in safety evaluation studies are usually placed in areas of effect, such as reproductive or genotoxicity. This is simply a reﬂection of the ﬁelds into which toxicology, particularly regulatory toxicology, has been divided for evaluation of the functions that are considered to be signiﬁcant to the consuming public. These comfortable divisions tend to ignore the fact that some substances have undesirable activities across the whole toxicological spectrum and, conversely, that some very toxic substances do not have toxicity predicted for them in certain areas. Conventional toxicology teaching tends to address one aspect of a compound’s toxicity at a time, for instance, emphasizing the hepatotoxicity of paracetamol (acetaminophen) while not mentioning its renal effects, which may be seen independently of overdose and particularly in combination therapy with other nonsteroidal anti-inﬂammatory drugs. TCDD is reported to be carcinogenic, immunotoxic, acutely toxic in animals, and to affect male reproductive capacity. In genotoxicity, however, results have been largely negative and evidence suggest that it is not genotoxic. For many compounds there is overlap between ﬁndings in general toxicology and those in other areas such as reproductive toxicology or carcinogenicity; effects in one area may indicate potential effect in another. The corollary of this is that although it may appear neater to pigeonhole the various effects into simplistic categories, this may not be the best option from the point of view of hazard prediction. Having identiﬁed a hazard from the safety evaluation data, relevance to humans may be assessed by knowledge of the mechanism by which the effect was achieved. For this to be successful there has to be thorough understanding of the comparative physiology of the test systems and of humans. For instance, the action of hepatic peroxisome proliferators in rodents has been shown to be a rodent-speciﬁc effect through comparative studies, including long-term studies in marmosets (see the ciproﬁbrate case study in chapter 11) and in vitro studies in human hepatocytes. Similarly, the renal toxicity seen in male rats with compounds that complex with ␣2␮-globulin has no human relevance due to the absence of these proteins in humans. Although an effect seen in animals may be expected to be absent in humans, due to differences in pharmacokinetics or quantitative differences in metabolic pathways, this does not necessarily remove it as a potential human hazard. Due to the wide variation in the human population, it is possible that metabolic polymorphisms and other individual differences may be able to reproduce the effect in susceptible individuals. The likelihood of this happening is assessed through risk assessment. In summary, the overriding principle of hazard prediction is that all the data should be assessed and that a mechanistic explanation sought for any effects seen. If there is a scientiﬁcally acceptable explanation for an effect, an assessment may then be made of the relevance for humans. If the speciﬁc mechanism of toxicity is absent in humans, it is probably reasonable to conclude that the hazard is not relevant to humans. Where there is no explanation of effect, other aspects of the data must be considered, including dose response and comparative ADME.

296

A Guide to Practical Toxicology 2nd Edition

STEPS IN THE PREDICTION PROCESS The following sections look at the process by which toxicities are examined and predicted to be relevant or otherwise as hazards to humans; although the emphasis is on human-relevant effects, the general remarks should be relevant to other targets, such as other animals or the environment. Prediction of hazard is an evolving process. Initial predictions made from the data of early studies are tested in further studies and then “ﬁnalized” when the program is completed. These predictions may be revised as more data are gathered. Epidemiological study in target populations is often the source of such data and is used to test the earlier predictions made from toxicity studies and any trial data in humans. Because epidemiological studies or marketing surveillance are initiated after the release of the compound onto the market, they are not predictive unless used to support changes in use of the test compound. However, epidemiological studies for similar chemicals may be used to support predictions of safety (or hazard) made for the test chemical. Basic Preliminary Questions Before embarking on the process of hazard prediction (or characterization), the objective has to be clearly deﬁned by asking the question “What are you attempting to predict?” The reason for the prediction has to be considered in the light of the intended use of the chemical and, as a result, what is the expected target population. The objective should indicate the type of data that are necessary (or optimal, as there are often gaps or deﬁciencies in the available data) for successful prediction. A further consideration is the level of prediction required. The process is inﬂuenced by the speciﬁcity required, whether the whole population is concerned, a selected part of that population (e.g., farm workers), a patient group, an individual, or the environment and ecosystem. Prediction in the early phases of chemical development may simply relate to test system choice, for instance, using data from in vitro comparative metabolism studies for species selection. As described below, prediction may also use computer models or expert systems to predict hazard and a choice has to be made, of which should be used. Using one system in isolation may give a skewed perception of the real hazards involved, while using every system in existence will cloud the issue irretrievably. System selection should be carried out in the knowledge of the weaknesses of the available options and the desired endpoints for prediction. The next question to be asked relates to the available database from which the prediction is to be made. How extensive and how reliable are the data? Are there animal data (pharmacology, toxicology, or ADME), human clinical data, or results from in vitro experiments? Furthermore, were the data derived from studies conducted as part of the basic package required for registration with regulatory authorities or were they performed to explain the results of such studies? This database review should also indicate if any further work is needed to clarify the

Prediction of Hazard

297

results of any of the existing studies, for instance, through an in vitro study of toxic mechanism. From these questions, the uncertainties involved may be assessed; for instance, is an extrapolation from an in vitro experiment to humans being requested. The ease of prediction increases with increasing biological proximity to the target species. In this instance, “biological proximity” includes experimental design as well as taxonomic considerations, although precise targeting of mechanistic studies in vitro may mean that this latter concern is less important in some cases. Databases for Prediction—Quality and Composition Unsurprisingly, the accuracy of hazard prediction is critically dependent on the quality and extent of the database that is used, and on the interpretation and conclusions that have been drawn. The available data set may be large or small and, in some cases, may not relate directly to the chemical of interest, but to a member of the same chemical class; this is often the case with workplacerelated assessments when few data are available. Although it has been said that the whole data package needs to be taken into account in hazard prediction, it is important that the data be relevant to the question asked. Any safety evaluation study can be said to be predictive and, generally, the security of prediction increases with the increasing database. However, large amounts of inadequate or inappropriate data will not help the process and will simply add unwanted complications. Klimisch et al. (1) have proposed a systematic approach to the evaluation data quality, reliability, and adequacy, which is discussed in more detail in chapter 14. While it is reasonable to assume that a contemporary safety evaluation program conducted to modern standards is likely to be reliable, this should not be taken as a certainty. In contrast, older studies, especially those performed before the inception of Good Laboratory Practice in the late 1970s, should be viewed with some caution. This is not because they are likely to be scientiﬁcally inept, but because standards of conduct and examination have improved to such an extent that changes dismissed then as irrelevant, may be viewed differently today. Older studies need to be assessed in terms of the group size, data records and reporting, and husbandry and treatment procedures. The presence of audit reports by a Quality Assurance Unit working under Good Laboratory Practice will add a degree of reassurance to the exercise. In comparing older studies with more recent ones, possible variation in the quality of the test material should be considered. Changes in quality can occur over a period of years due to evolution of production methods; sudden changes in production can lead to unexpected impurity, sometimes associated with unwelcome toxicity, as seen with tryptophan. Equally, advances in analytical techniques, generally in the direction of vastly increased sensitivity, can reveal impurities in modern batches that intuition indicates must have been present from the outset, but undetected. The composition of an optimal database is reviewed in Box 1.

298

A Guide to Practical Toxicology 2nd Edition

Box 1 Desirable Database for Prediction of Human-Relevant Hazard For a recently developed chemical the normal and desirable database would contain information on the following: r General toxicology: Target organ effects resulting from repeated administra-

r r r r r

r r

tion should be highlighted in these studies. They may identify progressive or chronic changes, which can indicate signiﬁcant hazard. These studies provide data relevant to many areas of effect. Genotoxicity: Shows potential for genotoxic effects; any positive results are indicative of hazard, as the experimental conditions often do not reproduce in vivo conditions. Carcinogenicity: With indication of mechanism if appropriate. Reproductive toxicology: One of the major hazards to look for; endpoints examined that are of concern include effects on fertility, embryotoxicity, and postnatal development. Skin sensitization and hypersensitivity: Should show potential for dermal effects that could be of importance in production personnel and which are, of course, critically important for dermal preparations. ADME data and information on pharmaco- and toxicokinetics: There may be information on the particular P450s that are involved in metabolism and this part of the package will act as an anchor for the in vivo data, particularly in interpretation and mechanistic work. Safety and efﬁcacy pharmacology: These studies should identify transient, reversible hazards, e.g., cardiovascular or respiratory changes. Human data: These may relate to clinical experience (with drugs) or (very occasionally) to volunteer studies with pesticides.

In addition, there should be data on the physical and chemical characteristics of the parent molecule and on the physical form used in the evaluation. Although these are important, they have a greater signiﬁcance in assessing risk. For instance, lead poses a number of hazards which do not change with physical form; however, lead on church roofs carries much less risk to the public than lead in paint or drinking water. There may also be predictions derived from computer-based models and systems, which can cover a number of endpoints. These are useful when there is only a small database to work from but they should be considered to be tools, which can be misused all too easily. There is a stark contrast between what might be seen as a desirable database, as outlined above, and the type and extent of data that are often available. This is especially the case for workplace assessments of chemicals used as intermediate steps in the synthesis of the ﬁnal product. In these cases, the hazard prediction process has to be conservative and is often based on proximity of the molecule to the ﬁnal product in the synthesis pathway. For a chemical produced late in the

Prediction of Hazard

299

synthesis, it may be possible to relate structure to expected pharmacological effects or toxicity; in these cases, the use of computer models becomes more important. Early in synthetic pathways, it is likely that the compounds used or produced will be commercially known or sufﬁciently similar to known chemicals to be assessed for hazard by literature searches or similar means. Database deﬁciencies are also frequently encountered when chemicals that have been in use for years, often decades, are considered. Concerns expressed by new producers or people looking for new uses, are sometimes greeted with indifference—“We’ve used it for years without any [recorded] problems”-–and it is very difﬁcult in these cases to come up with a rational approach that is based on science rather than comfort factors. The production in tonnes of a chemical may also affect the size of the available database because the amount of testing increases with intended annual production. Data Handling At ﬁrst sight, this might seem to be an oversimplistic item to be included. However, for a full-scale review of a complete data package, an ordered approach is essential as the amounts of data that are available can be enormous and not all of it is necessarily relevant or useful. Although it has been said earlier that putting studies into areas of investigation may be counterproductive, it is an essential ﬁrst step when there are large numbers of reports or papers, as it allows you to see what there is and gives an initial indication of any deﬁciencies. It is useful to decide early which studies are pivotal to the assessment and which provide supporting evidence. The quality of study design and reporting come into consideration at this point; if there are studies that are not as good as others, these may be useful as support rather than being seen as deﬁnitive or pivotal. A deﬁnitive study may be deﬁned as one which completes a series, conﬁrms a set of ﬁndings or offers a mechanistic explanation and which, crucially, has been conducted to high standards of design and interpretation. The term pivotal usually refers to the study which is used as the basis for a risk assessment; the term also implies quality of conduct and interpretation. As the report is usually the only evidence of this available, it has to be complete and has to have all the data and details of personnel responsible for the study conduct and reporting. Further layers of comfort for the reviewer may be provided if the testing facility is well known and independent of the developer, although with current controls exerted through enforcement of Good Laboratory Practices, the latter point is less signiﬁcant than it used to be, even allowing for regulatory cynicism. The next step is to identify toxicities in the various study areas covered by the reports and check for potential overlap and interdependencies between the various areas. It is also important to check for consistency. For example, where studies have been repeated, were the effects reproducible and consistent among studies or laboratories and, if not, why not? There is a degree of interpretational variation among toxicologists in both contemporary and historic terms. Historically, interpretation may have been different due to lack of knowledge of the signiﬁcance of

300

A Guide to Practical Toxicology 2nd Edition

changes seen; effects dismissed at one time may acquire new meaning, as research continues. In some cases, interpretation may have been weakened by standards of study design and conduct that were acceptable at the time the study was commissioned but are now outdated. It may be possible at this point in the review process to indicate what extra studies are needed to facilitate the hazard prediction. This may save a fair amount of effort in reviewing essentially useless studies. FACTORS FOR CONSIDERATION IN PREDICTION In considering toxicity seen in test systems used in safety evaluations, the primary questions relate to the effects seen and the mechanisms by which they occurred. Although it is possible to point out toxicities in humans that are not easily reproduced in animals, it is not safe to say that the reverse is true. Much research grant money has been spent in investigation of the toxicity of TCDD, after experience in the Vietnam war and at Seveso. Although it is clear that it is highly toxic in animals and that guinea pigs are extremely sensitive to it, with lethal doses measured in micrograms, it has been said that the only proven effect in humans is chloracne. Having said that, however, no one is queuing up to say that TCDD is safe. However, there are a number of toxicities that are seen in animals, which are acknowledged to be speciﬁc to the species. For example, the ␣2␮-globulin nephropathy is seen only in male rats; others would include peroxisome proliferation seen in rodents treated with hypolipidemic compounds such as ciproﬁbrate or plasticizers like diethylhexyl phthalate. Although these are “standard” toxicities, there still needs to be proof that they are responsible for the changes seen. Once the mechanism of an effect has been established, the relevance or otherwise to humans may be assessed. However, it should be borne in mind that these assumptions may be challenged as the research base expands. In some cases, the test system used in the evaluation may be said to be irrelevant to humans. Although it is clear that bacteria are phylogenetically remote from humans, a positive effect in the Ames test should not be ignored, as it shows a potential for genotoxicity that may be reﬂected in other systems. If there is a particular mechanism by which this was achieved then the relevance of the effect may be assessed. Historically, it has been usual to indicate an order of increasing human relevance with increasing evolutionary complexity. Thus, a progression from bacteria to Drosophila, to mouse, to rat, to dog, to nonhuman primate, might be set up to suggest that data from rats are more relevant to humans than those from mice. This may be so as a general rule of thumb, but it is no more than that. Although it may be intuitive to assume that nonhuman primates will give a better indication of human effect than other species, this is not necessarily the case. The increasing use of transgenic animals will further challenge these traditional and falsely comforting beliefs. As an additional complication, a general prediction of the effects in humans is unlikely to be completely applicable to the whole population due to genetic variation between individuals and their circumstances (lifestyle, disease, etc.).

Prediction of Hazard

301

As has been pointed out above, dose is not a primary factor in hazard prediction, as it is considered during risk assessment. In the same way, the form of the chemical does not alter the hazard, merely the risk of expressing that hazard. However, if the margin of safety is very large—expressed as a multiple of the expected human exposure needed to reach the no effect level in the most sensitive species tested—it may be possible to say that the hazard is not predicted to be relevant to humans and that further risk assessment is not needed. Furthermore, if there is a clear threshold below which the toxicity is not expressed, this may be used to determine relevance to humans. A large multiple between the toxicity threshold and the expected exposure in humans is a signiﬁcant driver in this assessment. Another factor that might appear to reduce the signiﬁcance of an effect from the point of view of human relevance is reversibility. In toxicological terms, an easily reversible effect, such as a mild increase in liver size due to enzyme induction, is often ﬂagged as being of minor toxicological signiﬁcance. In any assessment of the relevance to humans of such change, the type of change and the speed and extent of reversibility have to be considered. In hazard assessment terms, a transient change in the liver (which has considerable recuperative powers) will be rated as less signiﬁcant than a transient change in the central nervous system, which has poor repair capabilities. The mechanism by which a systemic toxic effect is produced is, in broad terms, a function of physiology or biochemistry and the disposition and elimination of the chemical (ADME), and interspecies differences in toxicity are often attributable to these factors. The nephrotoxicity of ␣2␮-globulin complexes is attributable to the large amount of this protein that is produced in male rats, in comparison with females. There are various hormonal differences between laboratory animals and humans that can be invoked to explain toxicities in test animals. Overproduction of growth hormone in dogs following progestogen administration resulted in an increased incidence of mammary tumours. In rats, increased prolactin concentrations are also associated with mammary tumours. Neither of these hormonal pathways and mechanisms is present in humans and both are therefore not human-relevant. There are also differences in the hormonal control of reproductive processes, including parturition, between laboratory animals and humans, and such differences may mean that some effects seen in reproductive toxicity studies are not relevant to humans. The processes of ADME in the test system should be considered when attempting to relate effects seen to those expected in humans. Differences in toxicities seen among species may be due to inherent differences in metabolism; the task for the toxicologist then is to assess which of the species is more relevant to humans. Acetylaminoﬂuorene is a potent animal carcinogen, which causes tumours in the liver, bladder, and kidney through N-hydroxylation followed by production of a sulphate conjugate. However, guinea pigs are resistant to the effects of acetylaminoﬂuorene because they have low activities for N-hydroxylation and sulphation; this resistance is overcome by giving N-hydroxyacetylaminoﬂuorene.

302

A Guide to Practical Toxicology 2nd Edition

Acetylaminoﬂuorene has been variously designated as a suspected, potential, or probable human carcinogen. If the pharmacokinetics in animals are grossly different from those in humans, the effects seen may not be human-relevant but this does not entirely remove the hazard as a risk. Much metabolism of xenobiotics is carried out through the cytochrome P450 family and there are differences in activities between the various laboratory species and humans. It needs to be pointed out that these are usually the differences in activity rather than presence or absence, and that the toxic metabolites may still be present in humans, albeit at much reduced concentrations compared with those in the test species. This may then be considered in a more formal risk assessment, if this is considered appropriate. If toxicity seen in animals is due to a metabolite that can be shown to be absent in humans, it is unlikely to be human-relevant. Equally, the absence of toxicity in a test system that metabolizes the chemical differently to humans, either by prediction or observation, does not indicate that the chemical will be safe in humans. Studies with the major human metabolites should be considered, if they are not present in normally available laboratory animals. (Although it has been said that toxicity studies should be conducted in a metabolically and pharmacokinetically relevant species, this is usually no more than a Holy Grail, due to expense and practicality.) In assessing the signiﬁcance of the effects of one chemical, knowledge of the properties and toxicity of chemicals from the same class or with the same mode of action is also an invaluable aid. Although such knowledge is useful, it has to be treated with some circumspection as toxicity can vary widely across a group. This is illustrated by the organophosphates which have a very wide range of active dose levels as shown by the three examples given in Table 1, in chapter 1. When comparing chemicals across groups, knowledge of the structure–activity relationships is also important. In organophosphates, the bond types around the central carbon atom of the phosphate group affect whether the compound will be associated with “aging” of the bound enzyme and possible delayed onset neuropathy. Aging involves in situ metabolism of the bound organophosphate molecule with consequently increased binding afﬁnity. The presence of a P–O–C bond between the phosphorus and one of the side groups of the molecule, as in tri-orthocresyl phosphate, is associated with rapid aging, while a P–C bond makes this impossible. Some of the more complex hazard prediction situations are provided by in vitro data, from which an extrapolation to humans is necessary. This is often seen with genotoxicity data, where a single positive in an in vitro test, usually (but not always) a chromosome aberration study in Chinese hamster ovary or mouse lymphoma cells, can cause a variety of problems. If this is offset by a negative in vivo study in the mouse micronucleus test and a negative Ames test, it used to be that the single positive result would be dismissed. However, a more questioning approach has evolved where the circumstances of the various results are considered very carefully before reaching a conclusion on relevance. Once it has been accepted that the positive result is not associated with a threshold

Prediction of Hazard

303

of effect or is due to excessive toxicity, a number of questions can be asked in order to clarify the meaning of the data. These are not only directed particularly at exposure of the test cells but also at mechanism. Partly, this is driven by the difﬁcult question of whether negative data in genotoxicity tests constitutes adequate proof of nongenotoxicity. For chemicals that have low oral bioavailability but that are reasonably soluble in routine parenteral vehicles, it should be possible to achieve adequate exposure of bone marrow by intravenous administration. If the results of this test are negative and it can be shown that the bone marrow was exposed to a greater degree than that achieved in vitro, this will add to evidence that the positive result in vitro is not relevant in vivo. A poorly soluble compound may still be associated with genotoxicity in vitro, as it has been demonstrated that precipitates may still give positive results. However, such a compound is often associated with poor absorption from the gastrointestinal tract and is usually very difﬁcult to be given intravenously at high enough doses to duplicate the exposures seen in vitro. Both these factors mean that exposure of the bone marrow cells in the mice is likely to be less than of the cells in vitro. Low bone marrow exposure to an active mutagen may also be seen where there is extensive ﬁrst pass metabolism following oral administration, especially if this results in a conjugated metabolite that is not dissociated in the target tissue. Although in vitro tests use S9 mix as a metabolic activation system, in standard protocols, this is prepared from the livers of rats treated with enzymeinducing agents, which may not be the most appropriate tissue or system for the test chemical. At this point, mechanistic studies looking at the activities of speciﬁc enzymes in target tissues may be invoked to determine relevance of the results; if there is signiﬁcant reversion from conjugate to parent in human tissues, the absence of mutagenicity in the various tests may be deceptive. Another approach is to examine tissues that may be expected to have had maximal exposure to the test substance, whether as a precipitate or as a saturated solution; these would normally be the stomach (in oral administration) and the liver. The Comet assay is gaining popularity in these circumstances, as a positive result indicates DNA damage in the target tissue and is a clearer indicator of mutagenic potential. As with any toxicity, an understanding of the mechanism by which the result was produced is essential to overall interpretation of the various studies. Interpretation of genotoxicity data is facilitated by the presence of other data relating to the carcinogenic potential of the test or similar chemicals. In summary, for secure prediction that a toxic effect seen in safety testing is not human-relevant, there has to be knowledge in the following areas: r r r r

Mechanism of effect and whether this is species speciﬁc; Comparative physiology; Whether there is a clear threshold of effect, below which toxicity is absent; Comparative ADME; these studies are useful but may not imply absence of risk; r Relevant data from other chemicals of the same class and action;

304

A Guide to Practical Toxicology 2nd Edition

In ﬁnal analysis, it has to be recognized that it may not be possible to predict that an observed toxicity is not a hazard for humans from the available data; in which case, appropriate mechanistic studies should be conducted to demonstrate speciﬁcity of effect. In the event that these studies are not conclusive, a conservative approach must be taken with a formal risk assessment.

PREDICTION FROM MINIMAL DATABASES All too frequently, as implied by the discussion of what a desirable database should include, the amount of data available is less than completely ideal. This is usually not only the case for an untested intermediate used during the synthesis of a ﬁnal product, but is also often found with well-established chemicals that have been used without problem for many decades. With the early parts of a synthetic pathway, the chemicals used are sometimes well known and characterized by existing research. The problem becomes more acute in the later stages when the end products of each reaction are themselves novel chemicals. The distinction between these intermediates and the ﬁnal product is that formal regulatory testing is not required and so the database for the former is small. One exception to this would be when the synthetic process is carried out at more than one location, the toxicity of the transported chemicals would have to be assessed according to the annual amounts produced. Another setting in which the database may be expected to be small is found at the very early stages of evaluating a new chemical. Factors to predict the toxicity of an unknown chemical and then extrapolating that prediction to a situation of human exposure are summarized in Box 2. Box 2 Prediction from Minimal Databases The following are among the factors that should be considered in maximizing the database: r Physicochemical properties of the molecule–partition coefﬁcient and solur

r r r

bility, molecular weight, pK a (the pH at which it is 50% ionized), volatility. These properties may be compared with the ﬁnal molecule. Structure–activity relationships known for the ﬁnal molecule; if structure associated with pharmacology or toxicity in the ﬁnal product are present in the intermediate, it is sensible to assume similar activities for the intermediate. Expected dose levels compared with no observed effect levels for the ﬁnal product. Metabolism of the ﬁnal product; if there are metabolites that are similar to the intermediate, this may point to toxicity. Properties of chemicals related by structure or intended action.

Prediction of Hazard

305 O

OH H2N N H

Figure 1 4-Hydrazinobenzoic acid (CAS no 619–67-0).

If the intermediate is synthetically remote from the ﬁnal product, other factors have to be considered. These include an assessment for the presence of chemical groups or structures that are associated with known toxicity in other chemicals. Thus, 4-hydrazinobenzoic acid (Fig. 1), the contentious component of mushrooms, is an aryl hydrazine, a structural conﬁguration that has been associated with mutagenicity, carcinogenicity and skin sensitization. There are a number of tools available that assist in this process of identifying these structure–activity alerts. These are seen in the various toxicity prediction software systems that are available and in systems that can conduct literature searches based on structure as opposed to keywords. Ultimately, the decision process is similar to that used for large databases. The evidence is reviewed and an assessment made as to the probable toxicity and consequent hazard. The inevitable difference is that the conclusions of such an assessment must be conservative until supported by more trustworthy evidence. The use of computer-based expert systems has a great part to play in these processes and as they evolve and become more interlinked, their reliability will increase. COMPUTER MODELS FOR TOXICITY PREDICTION An ECVAM workshop (2) is still useful as a guide to the system types and their attributes. However, it is clear that there is considerable continuing development and that a detailed review now of individual systems will be out-of-date almost as soon as it is written. With this in mind, it is the intention here to give a broad review of the type of system that is available, and the weaknesses and strengths of systems in a general sense. This general description is followed by some discussion of the accuracy of some of the systems. Deﬁning an Expert System Considerable human expertise is available to predict toxicity by scrutiny of structures, and there is no doubt that this is a powerful source of knowledge and judgment for use in predictions of toxicity and hazard. However, this knowledge base is best considered as being volatile due to illness, retirement, resignation, or death, and as a result is not always available where and when it is wanted. The

306

A Guide to Practical Toxicology 2nd Edition

intention of an expert system is to bring all such expertise at one place where it may be accessed at any time by anyone. Although such systems need not be computer based, for the purposes of this review, it is assumed that they are. Broadly, they are formal systems that provide predictions on the toxicity of chemical structures, which are entered into them by input on a screen. All these systems rely on toxicity data for other chemicals that have been entered into them and on the use of rules that have been devised from or in the light of those data. In essence, there are two types of expert systems: Those that use mathematical algorithms to produce quantitative results (QSAR) and those that use rules (SAR), which may only indicate the plausibility of effects and do not offer the possibly fallacious comfort of a dubiously derived number. The principles by which a QSAR system works are based on mathematical calculation, from physicochemical parameters or relationships using regression models, or on existing knowledge, for example, the association of a particular chemical group or structure with a speciﬁc endpoint such as mutagenicity or sensitization (a structural alert). While calculation allows a degree of extrapolation into new scientiﬁc territory, there cannot be complete conﬁdence that errors made in setting up the rules or in inputting data are not being magniﬁed with repeated recalculation. On the other hand, knowledge-based rules are just that and are dependent on input of that expert knowledge and, to a degree, expert judgment. The mathematical rules and systems are suitable for QSAR analysis and can produce probabilities that an endpoint or a value for a dose level, such as an LD50, will be realized. The beneﬁt of such values is that they give a number that can be quoted, in an appropriate context; the downside is that the accuracy of such numbers is often highly questionable and can be little better than chance, especially in the case of dose levels. Another factor is that the process by which such numbers are produced is usually opaque to the user and there is little chance of rationalizing the result. In contrast, with knowledge-based systems, there are usually literature references that can be accessed to support a particular conclusion. This may not be as comforting as a number, but the results are probably more trustworthy as they do not give a potentially false impression of accuracy for the prediction. The various endpoints that may be covered by these systems are listed in Table 1 (3); the fact that some, such as carcinogenicity, are listed with slightly different titles, probably reﬂects the differing conﬁdence (and marketing aspirations) of the people who originated the models. Criteria for Success In assessing a molecule for potential adverse effects, a human expert looks at it in terms of molecular structure, size, constituent groups and elements, ionization potential and polarity, and probable metabolism. It should also be possible to say if one group will affect the inﬂuence of another nearby group, for instance, by

Prediction of Hazard

307

Table 1 Endpoints Predicted by Expert Systems Acute inhalation toxicity LC50 Acute oral toxicity LD50 Acute toxicity LC50 Acute toxicity EC50 Ames mutagenicity Anticholinesterase activity Carcinogenicity Chronic lowest observable adverse effect level (LOAEL) Corrosivity Developmental toxicity Hepatotoxicity hERG channel inhibition Irritancy Lachrymation log P Maximum tolerated dose (MTD) Methemoglobinemia ␣2␮-Microglobulin nephropathy Mutagenicity Neurotoxicity Phototoxicity Respiratory sensitization Rodent carcinogenicity Skin and eye irritation Skin sensitization Testicular toxicity Teratogenicity Source: Adapted from Refs. 2, 3.

electron withdrawal or steric hindrance. The molecular weight gives a rough rule of thumb guide to whether it will be excreted in the bile or urine; the physicochemical data will give some idea of absorption potential and corrosivity. The human expert will assess the three-dimensional structure of the molecule and whether it has any chiral centers of asymmetry. Previous knowledge and experience may be available to the expert to warn of possible effects associated with that class of chemical or with particular structural conformation. This may also be associated with lateral thinking that leads to literature searches for suspected relationships or contributing factors. If allowance is made that lateral thought is unlikely in current software, it is this broad outline that an expert system should attempt to reproduce. Although an expert system cannot yet replicate the multifaceted examination and thought processes of a human expert, there are certain aspects that should be considered essential. It should have the following characteristics:

308

A Guide to Practical Toxicology 2nd Edition

r Allow easy entry of molecular structures. r Recognize structures associated with toxicity or unwanted pharmacology. r Predict interactions between different parts of the molecule, electronwithdrawing characteristics, etc. r Have some capability of prediction of metabolism and of then assessing the toxicity of those metabolites. r Be transparent as to how or why the prediction results were produced. r Be user trainable, e.g., for speciﬁc chemical series. r Accept large molecules. r Allow prediction/calculation of physicochemical properties, such as log P and pK a or give scope for data entry. r Have some appreciation of the three-dimensional structures of molecules and chiral centres. r Be sensitive to the signiﬁcance of chemically minor changes (such as substitution of S for N) that may be toxicologically signiﬁcant. r Take advantage of the beneﬁts of mathematical and rule-based approaches by judicious combination. r Be easily updated with continuous development by the producers. The ability to enter or calculate the physicochemical properties is an important point when assessing potential absorption or irritancy and corrosivity. Prediction of irritancy/corrosivity can be poor in systems that do not have the ability to calculate physicochemical data. For assessing potential dermal absorption, the ability of a chemical to cross the skin tends to increase with increasing log P (the octanol–water partition coefﬁcient, a measure of lipophilicity), although at very high log P values, the permeability starts to decrease again. The detection of structural alerts is an absolute essential, but it is as important to be able to predict interactions among adjacent groups in the molecule. Given that much toxicity is due to metabolites, the ability of a system to predict metabolism (and other aspects of ADME) is useful and can save time. The range of molecule size that can be assessed should be as large as possible; a limited range may limit the utility of the system. To be successful, a system should not be unduly restricted in the type of molecule that it can assess. However, there are certain types of molecules that present particular challenges, such as polymers, and it is probably unreasonable to expect every system available to be able to cope with every class of compound. Above all else, the strength of the database on which the system or module is based, is absolutely critical for anything approaching success. Ironically, much reliance has been placed on the results from programs such as the U.S. National Toxicology Program, especially for carcinogenesis prediction, where some of the study designs and interpretation may be open to debate, particularly for the older studies. These are rodent carcinogens and we use a computer to predict rodent carcinogenesis on the basis of sometimes dubious data from old studies, which we must then extrapolate to the human situation. Another factor of debate here is the

Prediction of Hazard

309

judgment calls that have to be made when the difference from control is not clear enough to give a clear positive or negative classiﬁcation. Ironically, for expert systems, use of expert judgments that might be debatable is a weakness—quantitative or black and white data are better. There is no way round this particular challenge; the number of rodent carcinogens is much larger than the number of proven human carcinogens, and the use of the latter would not give a sufﬁciently large amount of information for a credible database on its own. A further, inevitable, weakness is that the systems must rely on prior knowledge, and this means that for novel toxicities the systems will not be predictive because the mechanism, chemical structure, or interactions and properties have not been encountered before. However, this could also be said of animal studies. The databases really exemplify the old computer adage of “garbage in–garbage out.” For this reason, it is important to be able to understand how the system has arrived at its prediction, and this is where falsely comforting numbers produced by opaque processes are less usable than predictions based on rules with literature references that can be examined for relevance to the molecule under investigation. Databases are also affected by the tendency to place emphasis on the chemicals that have been shown to have the predicted toxicity over those that were negative or not toxic. Absence of toxicity is as important as presence in prediction systems. Equally, there is a tendency for the toxic chemicals—the development mistakes—to be buried in company archives in conﬁdential reports that are not allowed into the public domain. Where the data or rule bases are developed by the users in a cooperative manner, there is a corresponding increase in the strength of the system and, inherently, of its credibility and the conﬁdence that can be placed in its predictions. For the purposes of lead candidate selection, it is particularly useful if the user of the system is able to enter data or rules for the series of chemicals that is being developed, retinoids would be a good example. By this means, a database speciﬁc to that series can be developed and the effects of additions or subtractions from the molecule may be assessed on the screen without having the expense of synthesizing the actual chemicals. Strengths and Weaknesses In general, these largely reﬂect the achievement or otherwise of the various criteria for success, although each of the systems available has different strengths and weaknesses. This means that care must be taken when choosing a system, especially when a speciﬁc type of molecule is going to be assessed on a regular basis. It is probable that any system will have difﬁculty with one or more types of molecules, although each of these types may well be covered by one or more systems. Many systems are limited in the size or type of molecule that they can deal with. Long-chain polymers can cause trouble, but also chemicals that contain metal atoms and peptides are among the molecular types that cannot be covered by individual systems. More fundamentally, there have been instances

310

A Guide to Practical Toxicology 2nd Edition

when compounds such as organophosphates or polyaromatic hydrocarbons were not assessed correctly due to deﬁciencies in the database. The importance of physicochemical properties has been mentioned earlier, and it is an advantage if the system is able to calculate these automatically and also to assess stereochemical effects, although the accuracy of the calculations may be somewhat variable. This will, apart from anything else, increase its ability to predict irritancy and corrosivity. Any attempt to increase the three-dimensional recognition of the software is also an advantage. The software itself is less easy to assess; there is a possibility in some systems that assumptions made in the production of the software may have been wrong, for instance, that structures contribute independently to biological activity. The ability to make allowance for such false assumptions is a property of systems in which the database and rule base are available to the user to rationalize individual model predictions, and to deﬁne the limitations associated with them. Such transparency indicates why a rule has been invoked; however, this is not possible with all expert systems. Some systems are more easily adapted to speciﬁc user requirements than others, for instance, in selection of screen colours and recognition of toxicophores or structural alerts. The ability to build an in-house database for a chemical series for predictions relevant to new members of that series is a big strength of some systems. Although a system may lack this transparency, it may still be possible to do a search to ascertain the similarity of the test molecule to those used in the database; there may be the ability to rank these chemicals for similarity to the test structure. The overall strength of this type of approach to molecular assessment is that they are generally easy to use and can give results very quickly, making them suitable for high throughput screening and prioritization of lead candidates. They can also be used during design of molecules for a particular target; goodness of ﬁt to the intended receptor or predicted activity can be offset by predictions of toxicity. It must be remembered, however, that the absence of predicted adverse effect cannot be assumed to imply safety or that predicted toxicity is inevitable. A signiﬁcant weakness is that they do not completely replace the need for expert judgment, as a degree of this is desirable to check the predictions for the more obvious inconsistencies. Finally, it may be beneﬁcial to look at the same molecule with more than one system—analogous to the use of several genotoxicity test protocols—in order to assess possible effects. However, due to cost, either in hardware or license costs, it is not usually feasible to have more than one or occasionally two, in the same place. Prediction, Validation, and Accuracy There are two types of predictions—qualitative and quantitative. Qualitative predictions merely indicate the possibility of the endpoint being realized. They predict molecular events or chemical reactions such as interaction or reaction with DNA

Prediction of Hazard

311

for mutagenicity. Where there are well-understood molecular mechanisms and good structure–activity relationships, it may be expected that these predictions should be reasonably “accurate.” A simple chemical reaction between a molecule and DNA may be relatively simple to predict. In contrast, an endpoint that has many different inﬂuences in its realization, such as reproductive toxicity, which is affected by numerous factors external to the entered structure, is much less easy to predict. From this, a ﬁrst rule of thumb may be raised: The more complex the endpoint, the less inherently trustworthy will be the prediction. A distinction should also be drawn between qualitative predictions that are based on chemical reaction, and those that are dependent on interaction with receptors. As the ability to interact with a receptor is sometimes not easily assessed from structure, this type of prediction tends to be less reliable than those for reaction-based interactions. Quantitative prediction, which is the next stage, is the calculation of a probability for a predicted event or an LD50 or MTD, or a physicochemical parameter such as log P. As with qualitative predictions, the values calculated for simple endpoints, such as log P, are likely to be closer to reality than those for parameters that are affected by factors external to the software. Thus, LD50 calculations have been largely a waste of time, as the results have shown little difference from what you would expect by chance. The MTD is notoriously difﬁcult to establish in vivo and, intuitively, there is no reason to suppose that a computer estimate is going to be any better. Furthermore, the MTD of a compound changes with the duration of treatment; if the deﬁnition of the endpoint is in doubt, the calculation of a number for it is even more suspect. In circumstances where data generated in vivo for a series of related compounds have been entered into the database, it is possible that computer-generated estimates may be better than those produced for unrelated compounds. In other circumstances, calculated ﬁgures for dose levels should be viewed with extreme suspicion. Performance of computer systems is assessed against preexisting data by prediction before testing is carried out. This is a similar process of validation to that carried out for new in vitro methods. The correlation of output from a computer system with the results of actual tests is inﬂuenced by the clarity of the actual test data and the ease with which they can be interpreted as positive or negative, black or white. For a clear positive or negative, there is no problem; but for anything debatable there is the problem—given the usually small sets of chemicals used in validation studies—that a single data point will swing the result by a disproportionately large percentage in one direction or the other. Other factors that the computer software cannot take account of can also be critical. Impurities in chemicals can have profound inﬂuence on toxicity and, while the pure chemical may be correctly predicted to be negative for mutagenicity, the actual production batches may not be. One aspect of the validation process that takes place using preexisting data is that, when all the data is assembled, there is a process of explanation for the discrepancies between the two methods. Thus, for compounds falsely indicated as mutagenic, the toxicophore might have been in a ring structure and not in a

312

A Guide to Practical Toxicology 2nd Edition

side chain, while false-negatives may have been associated with weak evidence of mutagenicity in the actual Ames test. By adjusting for this type of factor, it is possible to increase the percentage correspondence between the two data sets, but it does not remove the fact that the systems were less accurate in the ﬁrst place. Without conducting a detailed review of all the available systems and models and all the validation studies that have been conducted, the accuracy for most of the predictions for the simpler endpoints does not appear to exceed about 75%, as an upper estimate. Having said that, the performance of systems in particular models may be better than this and there is clear evidence that development and reﬁnement of systems does produce greater accuracy of prediction. This has been seen with rule-based systems and predictions of mutagenicity, which are now accurately predicted by some systems. In fact, if it is considered that a compound may be mutagenic or nonmutagenic and that these form two different positions for prediction, the performance of a system may be better in one respect than in the other. The problem of validation and how to do it is a constant, and the basis for comparisons is changing rapidly as system databases and rule bases are improved and mathematical formulae tweaked. However, there is the continuing problem that prior input of data for old compounds, as a basis for judgment of new ones, will not necessarily mean that the assessments will be accurate, especially where there are novel structural elements or previously unknown intramolecular interactions. No amount of analysis of hit rates, sensitivity analysis, or gentle data massage can change this. It is a certainty that accuracy of predictions will improve with system development; it is equally a certainty that some endpoints will always be associated with less accurate prediction due to their complexity, despite the touching optimism of salesmen. The accuracy of predictions produced by expert systems, and how it is assessed, has been a source of considerable debate. Starting from basics, the accuracy of an individual prediction is deeply inﬂuenced by what is attempted and what data is there to predict from. For a novel molecule, input to the system is simply a chemical structure. On this basis, is it reasonable to expect complex mathematics to provide a supportable prediction of a multifactorial endpoint, which is inﬂuenced by factors external to the molecule, such as physiology? As has been pointed out, the data from which predictions are made—the system’s database—are critical to the accuracy of individual predictions; the presence of ill-selected data and faulty assumptions disables the prediction before it gets off the ground. Dearden (4) carried out a detailed review of in silico prediction of drug toxicity, from which some of the criteria that assist successful prediction may be distilled. There is a distinction to be drawn between series of congeneric compounds and chemical groupings that are heterogeneous in structure or action. The chances of predictive success are increased if the chemicals are all part of the same series and have the same mechanism of action. Dearden emphasizes the beneﬁts that would accrue if drug company data were released for the use of predictive systems; this is already the case for one system, DEREK for Windows,

Prediction of Hazard

313

which is developed in collaboration with the users. It is also important to consider the context of the prediction; if there is a quantitative prediction that toxicity will be seen at a dose or exposure that is markedly higher than that expected in the target species, it is possible that the predicted toxicity would be irrelevant. However, not many systems can produce such quantitative predictions reliably. (although the principle provided here is clearly relevant to the use of test data to predict the relevance of toxicity, for example, in relation to therapeutic ratio.) In terms of accuracy of various systems, there have been a number of publications that review this aspect of toxicology in silico. Dearden (4) reported that DEREK for Windows correctly predicted the mutagenicity of 84% of 266 chemicals. Hulzebos and Posthumus (5) considered the role of QSAR in environmental research and compared predictions of DEREK for Windows (version 5) with those of Ecological structure activity relationships (ECOSAR) for 70 substances. These programs were selected because they were considered to be transparent in their predictions. ECOSAR is a simple-to-use program, which predicts the toxicity of chemicals to aquatic organisms (for example, ﬁsh, Daphnids, and algae), through the use of QSARs based on log Kow. ECOSAR correctly categorized 87% of the chemicals into classes, with an overall accuracy of prediction of toxicity of 67%. DEREK for Windows correctly categorized 90% of the chemicals and gave accuracies of about 60% for sensitization and 755 for genotoxicity and carcinogenicity. Skin sensitization is a critical property of chemicals and successful prediction will be a considerable advantage when the EU chemicals legislation (REACH) takes effect. Gerner et al. (6) reviewed the development of a list of structure–activity relationship rules for use in expert systems for prediction of skin sensitization by chemicals. They reported that the rules showed good predictivity (positive predictivity, 88%; false-positive rate, 1%; speciﬁcity, 99%; negative predictivity, 74%; false-negative rate, 80%; sensitivity, 20%). These publications are merely the tip of the iceberg of the literature available on this aspect of in silico toxicology. Although these various percentage “accuracies” look very good, it should be remembered that it is easy to be lured into the false security of numbers. These systems are tools to be used with discrimination and with a careful appreciation of their strengths and weaknesses. It is reasonable to say that accuracy of prediction is increasing all the time. However, it cannot be overemphasized that the more complex the endpoint examined, the less accurate will be the prediction. The context of the prediction is also important, whether the chemical is a member of a partly tested series or part of a diverse group of unrelated chemicals. Generally, it is unreasonable to suppose that prediction of an endpoint inﬂuenced by factors over which the software has no control would be successful or reliable. Improving the Accuracy of Predictions There is no doubt that continuing development and reﬁnement of individual systems leads to increased reliability and accuracy of prediction for that system. Such

314

A Guide to Practical Toxicology 2nd Edition

improvement will always be prospective and the promise of accuracy tomorrow is unlikely to be useful in evaluating the problem of the day. In the same way that a single toxicity test is not conducted in isolation, the utility of computer predictions can be improved by using two or more systems. The use of two independent systems gives different angles of view on the same molecule and may give increased conﬁdence in the ﬁnal decision. Systems or modules can also be used in sequence, using output from one system as input for the next. Thus, metabolism of a molecule can be predicted and the metabolites processed through the toxicity modules of the same system or passed to another for assessment. It should be borne in mind that errors could be increased as the process continues, especially in systems that use calculation in the course of prediction. Performances ﬁgures, whether expressed as percentages or hit rates, are meaningless unless they are considered in the context of what the output will be used for. Opinions on the signiﬁcance of an accuracy of 75% may vary. Such ﬁgures are produced from comparison of the computer result with those from actual tests, with all their procedural differences or irregularities compounded by debates on the interpretation of the results. These accuracy ﬁgures are probably good enough for lead candidate selection or for assessing the possible effects of chemicals for which there is little test data, but they are not yet sufﬁciently reﬁned to be used in human safety prediction for mainstream marketing applications for chemicals. If such systems are used as an adjunct to the process of hazard prediction and not as the sole means of assessment, they have considerable utility and cannot be ignored. There are some important caveats, however. The various systems available have signiﬁcant differences in performance in different areas, and some are better with particular molecular classes than others. This means that, for given uses, some systems will be better than others and this must be taken into account when choosing a system. As implied earlier, it is better not to use individual systems in isolation and there is a range of supporting tools that can be used as adjuncts to the prediction process. These include any system used in the design of the molecule, for instance, for pharmacological QSAR screening. There are also systems that allow literature searches to be based on molecular structure or on parts of the molecule. It is also probable that physiologically based pharmacokinetic models will become of increasing importance, although they have a more traditional role in risk assessment. Ultimately, in consideration of the performance of computer systems, the cynical view must be remembered, that the toxicity of any novel molecule cannot be accurately predicted until the data for that molecule are entered into the database. Equally, it must be asked at the beginning of the process if you actually need an “accurate” prediction or whether you simply need to rank compounds in terms of expected toxicity, so that the best candidate can be selected for development. In this case, the consistency and relevance of output will probably be more signiﬁcant than ultimate accuracy.

Prediction of Hazard

315

PREDICTION FOR INDIVIDUALS The above discussion has been focused on the prediction of adverse effects in populations, whether of laboratory animals or of humans. However, the prediction of effect in individuals is becoming more important; although it may be characterized as individual risk assessment, it is covered brieﬂy in this section. Such assessments can cover the likely outcome of overdose to the probable response to treatment with speciﬁc drugs and the likelihood of interactions among prescribed drugs. This latter aspect is in its infancy but will become more routine, particularly in respect of clinical trials of new medicines and their subsequent prescription. The results of many clinical trials, which are the ultimate basis for regulatory acceptance for new drugs, are adversely skewed by lack of response of some of the patients entered into the trial. If it can be predicted in advance that a patient will not respond due to the presence of a metabolic polymorphism or some other phenotypic aspect, there does not seem to be much sense in exposing them needlessly to a drug that may actually harm them. The implication of this is that patient populations for clinical trials can be selected on the basis of their likely responses and that the trial data may be much more favorable as a result. The corollary of this is that the suitability of patients must be assessed by physicians before drugs are prescribed; the time- and money-saving implications of this are considerable, as appropriate treatment can be selected immediately and without lengthy experiment. This is the nascent science of pharmacogenomics. The difﬁculty arises when it is realized that biological situations are rarely black or white, and that a patient’s phenotype is probably an expression of varying rates of genetic expression and not simply a matter of presence or absence. As well as phenotype, the reaction of an individual to chemical exposure— intentional or otherwise-–is affected by personal circumstances. Thus, pregnancy or malnutrition will affect predictions as the relevance of deﬁned toxic hazards. In overdose, additional risk factors to be considered, apart from the dose taken, include the presence of alcoholism, smoking, or other drug abuse. The factors relevant in paracetamol overdose are reviewed in Box 3. Diclofenac, a nonsteroidal anti-inﬂammatory drug has also been associated with idiosyncratic liver toxicity, although in contrast to paracetamol, this may have a delayed onset of up to 3 months in chronic use (8). Prediciton of adverse effect is complicated by the lack of any simple relationship to dose and it is necessary to examine individual patient factors, such as metabolism, to reactive metabolites including 4-hydroxylation secondary to glucuronidation. In some cases, the effects may be immune mediated. Some concurrent diseases, such as osteoarthritis, may also increase the susceptibility to diclofenac hepatotoxicity, but the reasons for this are not clear. Boelsterli suggests that cumulative damage to mitochondria may explain the delay in onset of symptoms. Clearly, there is a case for identiﬁcation of patients at risk before treatment begins, or at least as soon as possible, after it starts.

A Guide to Practical Toxicology 2nd Edition

316

Box 3 Prediction of Toxicity in Paracetamol (Acetaminophen) Overdose r The lethal dose is approximately 16 g in a normal 70 kg human; out-

r r r r r r

r

r r r

come is inﬂuenced by hepatic status (e.g., coadministration of enzyme inducers, such as phenobarbital). Dose is always difﬁcult to establish accurately. Starvation, which depletes glutathione stores in the liver, exacerbates paracetamol toxicity. Chronic alcohol ingestion is additive in effect. Acute single alcohol ingestion, concomitantly, is protective. Hepatic damage is seen as centrilobular necrosis. Hepatic recovery has been noted in biopsies of people who recovered. Clinical course: symptoms in ﬁrst two days do not reﬂect seriousness of situation. Nausea, vomiting, anorexia, and abdominal pain are possible in the ﬁrst 24 hours and may persist for a week or more. Hepatic damage becomes clinically manifested in 2 to 4 days; plasma transaminases, bilirubin concentration, and prothrombin time are increased. Renal failure may be noted in the ﬁnal stages. Use of the Rumack–Matthew nomogram gives probability of hepatotoxicity from estimation of time of ingestion and plasma concentration of paracetamol; a plasma half-life or more than 4 hours is associated with a high probability of hepatotoxicity, which is often fatal. Antidote is N-acetylcysteine, given before 16 hours after ingestion of large single doses but is of questionable value in cases where repeated doses have been taken. Paracetamol is associated with renal and pancreatic toxicity Patients who consume excessive quantities of paracetamol in multiple doses usually present with toxic blood concentrations. Ellenhorn makes the point that it is not easy to predict paracetamol toxicity when there has been repeated use. Source: Adapted from Ref. 7 and other sources.

PREDICTION SUMMARY The following points are given as an overall summary for successful prediction of human relevant hazard: r Be sure of the parameters for which you are predicting: population group, environmental area, etc. r What is the purpose for prediction? r Be sure of your database from which you are predicting hazard.

Prediction of Hazard

317

r Use or consider all data but dismiss those that are not interpretable with any security. r Today’s prediction may look sad tomorrow.

REFERENCES 1. Klimisch H, Andreae M, Tillmann U, et al. A systematic approach for evaluating the quality of experimental, toxicological, & ecotoxicological data. Reg Tox Pharmacol 1997; 25:1–5. 2. Dearden JC, Barratt MD, Benigni R, et al. The development and validation of expert systems for predicting toxicity: The report and recommendations of an ECVAM/ECB Workshop (ECVAM Workshop 24). ATLA 1997; 25:223–252. 3. Woolley A. A Guide to Practical Toxicology 1st ed. London: Taylor & Francis, 2003. 4. Dearden JC. In silico prediction of drug toxicity. J Comput Aided Mol Des 2003; 17(2–4):119–27. 5. Hulzebos EM, Posthumus R. (Q)SARs: Gatekeepers against risk on chemicals? SAR and QSAR in Environmental Research. 2003; 14(4):285–316. 6. Gerner I, Barratt MD, Zinke S, et al. Development and prevalidation of a list of structure-activity relationship rules to be used in expert systems for prediction of the skin-sensitising properties of chemicals. Altern Lab Anim 2004; 32(5):487–509. 7. Ellenhorn MJ. Ellenhorn’s Medical Toxicology. Philadelphia: Williams & Wilkins, 1997. (Now available in third edition, Lippincott Williams & Wilkins, 2004) 8. Boelsterli UA. Diclofenac-induced liver injury: A paradigm of idiosyncratic drug toxicity. Toxicol Appl Pharmacol. 2003; 192(3):307–322.

13 Background to Risk Due to Toxicity

INTRODUCTION The use of any chemical is associated with risk, whether it is a novel drug, an established pesticide, an intermediate in a synthetic pathway, an industrial byproduct, or table salt. The next four chapters outline the basic tenets of risk analysis (risk assessment and risk management) with respect to toxicity. This chapter examines various aspects of risk, including how it is perceived and described, that are critical in successful communication and subsequent management of risks due to toxicity, either in the workplace or in a wider context. The relevant factors and processes by which the risks associated with the hazards relevant to humans (or another target species) are assessed are then reviewed.

OVERVIEW OF RISK ANALYSIS Risk analysis is the study of the overall process that includes risk assessment and risk management. Before starting to discuss this process, it is important to deﬁne the stages, as they can be easily confused. Various deﬁnitions of risk analysis and its components have been given. The most internationally recognized are those of the Inter Organisation Programme for the sound Management of Chemicals (IOMC, a cooperation of UNEP, FAO, WHO, UNIDO, UNITAR, and OECD), with the more accessible versions usually being from the United States. It is also important to note that the framing of the risk analysis process (the framework of legal instruments under which the risk analysis is conducted) and the undertaking of the risk evaluation (explained later) are at the intersection between the science of toxicology and policy—and this is not always a comfortable or smooth relationship. 319

A Guide to Practical Toxicology 2nd Edition

320

Risk Assessment Hazard identification

Dose response

Exposure

Risk Characterization

Risk Management Risk evaluation

Set controls

Monitor

Central Regulation (e.g., REACH / GHS and Workplace)

Consumers ADIs, MRLs

General Public (via the environment)

Workers WELs

Figure 1 Risk assessment and management.

Firstly, it is important to separate risk assessment from risk management. The federal government deﬁnition of risk assessment is “the characterization of the potential adverse effects of human exposures to environmental hazards.” Risk assessment is, classically, the process of characterizing and evaluating the potential adverse effects of a particular or generic type of human exposure to a chemical, including toxicity, carcinogenicity and reproductive toxicity, and assessing the probability that these hazards will be expressed in a target population (or their offspring). It therefore includes a consideration of the type of exposure (use as a therapeutic agent) and the existing (or likely) exposure (the exposure being that with the current or proposed management controls in place—e.g., requiring a prescription from a medical practitioner). Classically, this is a high-level process that extrapolates from the results of animal testing to the target species. It should include an assessment of likely exposure (the dose to be administered). It may include the use of sophisticated mathematical models. The relationships of the various stages of risk analysis are illustrated in Figure 1.

Background to Risk Due to Toxicity

321

It is generally agreed between the various sources that there are four steps in risk assessment, namely: r Hazard identiﬁcation, r Hazard characterization (or determination of type of toxicity and dose– effect/response relationships), r Assessment of expected exposure, and r Characterization of the risk. The process of risk characterization was deﬁned by the WHO/FAO in 1995 as the integration of hazard identiﬁcation, hazard characterization, and exposure assessment into an estimation of the adverse effects likely to occur in a given population, including attendant uncertainties. This includes qualitative and quantitative aspects and is the preliminary to risk management, which is seen as a separate entity. Evaluation of the risks deﬁned in the risk characterization is the initial step in risk management. There are three steps in risk management. r Evaluating the risks r Setting appropriate control measures r Monitoring whether the risks are adequately controlled (e.g., for drugs, pharmacovigilence and postmarketing surveillance for consumer products) The ﬁrst of these stages, risk evaluation, seeks to establish that the risks are “broadly acceptable” or that a satisfactory relationship exists between the risks and beneﬁts (i.e., the risks are “tolerable”). To do this, it is necessary to determine the relevance and signiﬁcance of any hazard identiﬁed in the risk analysis and of the risks to the target species or biological system that is or may be exposed. Naturally, where possible, the potential beneﬁts of any such exposure should also be considered, whether they be a reduction in fungal damage to stored crops or therapeutic beneﬁt for an anticancer agent. Beneﬁts may be socioeconomic as well as pathophysiological: the former are often more open to political and social debate, and the latter are usually more easily quantiﬁable. Risk evaluation may be conducted simultaneously with the earlier stage of risk characterization, although the two processes are conceptually separate. Following evaluation of the risks, risk management processes should ensure that there is “adequate” control of the exposure and emission and that the consequences of any remaining risk can be managed, if necessary through emergency planning. The ﬁnal stage, risk monitoring, is essential to ensure that the risks are adequately controlled and that adverse effects are not occurring in consumers, workers, or patients. Although high-level risk assessment and evaluation is brieﬂy considered in this chapter, the prime intention is to look at what might be termed its everyday use, for example, in the workplace and when choosing the ﬁrst doses to be used in human volunteer studies. This type of assessment considers the possible expression of any of the hazards identiﬁed as human-relevant following the overall interpretation of the safety evaluation data (cf. chapter 10), whether,

322

A Guide to Practical Toxicology 2nd Edition

practically, these are phenomena that are either present or absent (stochastic or ‘all or nothing’) phenomena like cancer or effects such as respiratory allergy (asthma), reproductive abnormality or other toxicities. The risk characterization should lead to a quantitative estimate of the “margin of safety” (or equivalent) between the exposure level likely to be encountered and the exposure level at which a certain low frequency of effects may be seen. That estimate is then evaluated in terms of its acceptability in the risk evaluation. If certain assumptions are made concerning the acceptability of a risk (usually by deﬁning a standard as a level of exposure that is the maximum acceptable or tolerable risk for the risk being examined, and therefore omitting the need for exposure data), these can lead to generalized risk evaluations in the absence of exposure data. Such risk evaluations lead to the setting of parameters such as acceptable daily intakes (ADIs), derived no effect levels (DNEL), workplace exposure limits (WELs) and maximum atmospheric concentrations in indoor or outdoor air. This is a clear case where risk characterization and risk evaluation are conducted simultaneously. Risk characterization and risk evaluation may need to be carried several times. It may be necessary to set controls on exposure in order to obtain an acceptable (or tolerable) exposure level. Those controls lead to different exposure levels and hence different risk characterizations and evaluations. If risk monitoring (or other new information, such as new interpretations of hazard data or new data) indicates that there is a problem with the risk evaluation or the controls, then, as with the setting of controls, the evaluation has to be repeated with the new information incorporated into the risk characterization. Periodic reviews of the data and of the risks (e.g., by review of the license for a medicine, a plant protection product, or a biocide) are therefore to be expected for the chemicals and uses that pose the highest risks. There has been a long-standing assumption in toxic risk analysis that the results of nonhuman experiments, whether in animals or in a Petri dish, are relevant to humans. A second assumption often, but not universally, made is that the effects of high dose or exposure will be seen at lower levels, that is, that dose response is always linear. Risk analysts also have to pay attention to public opinion concerning “safe levels of exposure” and “acceptable risk” when setting limits. The assumptions made have weakened risk analyses in the past and resulted in the imposition of unrealistic limits on chemical exposures. Risk analysts have considerable responsibility to get both their technical (toxicological) analyses and their assessments of societal opinion right, so that the limits of exposure that they propose are reasonable and derived from all the available data without the use of unrealistic assumptions. Setting a limit too high may expose people to toxic concentrations of a chemical with unacceptable effects. Setting a limit too low may mean loss of beneﬁt from use of the chemical or may impose cleanup processes that are excessively costly in relation to the marginal increase in beneﬁt. In risk analysis, it is necessary to apply Occam’s razor and to make no more assumptions than are needed to accomplish the declared purpose.

Background to Risk Due to Toxicity

323

LEVELS OF RISK AND FACTORS THAT AFFECT RISK Risk is present at various human levels ranging from personal; through speciﬁc populations, such as farm workers; to the general population of an area; to national and international; and thence to global. Personal levels of risk are determined by factors such as occupation, lifestyle, and home environment. The lifestyle of those about you may also be signiﬁcant. Smoking is clearly associated with a range of diseases, and the most emotive of which is lung cancer. Although there have been epidemiological attempts to correlate the effects of passive smoking with disease, these have generally been unsuccessful. However, to say that there is no quantiﬁable risk or demonstrated correlation is counterintuitive. Passive smokers are exposed to side stream smoke and to exhaled smoke. Although processing smoke through the lungs of the smoker might be expected to remove a large proportion of the chemical and particulates, this will not be totally efﬁcient and, consequently, other people in the vicinity will be exposed to the same toxic mixture, albeit at lower concentrations. Genetic proﬁle is also important and may determine the individual responses to chemicals both short term and long term. Skin colour and associated sensitivity to UV light is a well-known determinant of susceptibility to skin cancers. Biochemical or physiological factors such as metabolic polymorphisms inﬂuence individual responses to drugs and pesticides such as organophosphates (OP). Such individual characteristics may offer an explanation for differences between farmers’ long-term responses to occupational exposures, sheep dips being a point of heated discussion in recent years. Box 1 looks at cholinesterase inhibition as a toxicological target with speciﬁc reference to the use of OPs. It is worth noting that the referred paper by Stephens et al. (1) provoked two critical commentaries that were published in the same issue of the Lancet. The authors’ response (also in the same issue) addressed the concerns by reference to the full report, neatly illustrating the pitfalls in attempting to draw conclusions from a partly complete account or data set. Occupation has always been a factor to consider in personal risk as well as for particular working populations such as miners. Cancers associated with painting radium onto watch faces, working with ␤-naphthylamine or vinyl chloride, are well known and it is fair to say that the incidence of occupational cancers has been much reduced by appropriate application of risk analysis and risk management. In addition, there are synergistic factors that affect individual risk, such as the increased cancer risk associated with mining and smoking. Diet (individual and national) is also a factor of great signiﬁcance, both in terms of cause and in terms of prevention; as a result of this counterbalancing act, it can be difﬁcult to sort out what the signiﬁcant factors are in a population. High salt intake in Japan was linked to a high incidence of stomach cancer; high intake of rye bread in Finland has been associated with a reduced incidence of gastrointestinal cancers. Increased intake of antioxidants has been associated with reduced cancer risk. Such factors have clear impact on individuals,

324

A Guide to Practical Toxicology 2nd Edition

Box 1 Cholinesterase Inhibition: Factors in Risk Determination Cholinesterase inhibition came to prominence with development of OP nerve gases and insecticides and of the carbamate insecticides, both of which have been widely used in agricultural and domestic pest control. Latterly, cholinesterase inhibition has been used as a therapeutic objective in Alzheimer’s disease, through the action of drugs such as rivastigmine. Cholinesterase inhibition is a property of natural chemicals, such as solanine (see Box 4). r OPs show a wide range of acute toxicities; the nerve gas sarin has a par-

r

r

r

r

r

enteral LD50 less than 0.05 mg/kg, while malathion is lethal at around 1000 mg/kg orally (Table 1, chapter 1). Carbaryl, a carbamate insecticide, has broadly similar acute toxicity to malathion; carbamates tend to be less toxic than OPs due to differences in reactivation rates for the enzyme. Organophosphates have been widely used in sheep dips against sheep scab mites and are also used in orchards. Sheep dipping, which was compulsory in the United Kingdom between 1976 and 1992, poses signiﬁcant practical problems in controlling occupational exposure. It is strenuous, dirty work; sheep are inherently uncooperative and, as in all such circumstances, personal protection equipment is difﬁcult to wear with any comfort or, as a result, hope of real beneﬁt. Although the acute effects of OPs are well known, long-term neurological effects have come to prominence as the history of use has increased. A study in 146 sheep farmers indicated deﬁcits in attention and speed of information processing and susceptibility to psychiatric disorder (Stephens et al. 1996). Another study of OP-related change in sheep dippers has indicated evidence of neurological effects, especially in those with high exposures over a long period (2). Various papers have examined polymorphisms in paraoxonase, which metabolizes OPs in humans; this is present on a genetic level and as different afﬁnities/activities between substrates (3,4) These papers indicate potential differences in susceptibility to OPs and may explain differences in response seen between farmers. Low paraoxonase activity has also been reported in Gulf war veterans complaining of Gulf War Syndrome, in which OPs were one of the implicated factors (5). Although OPs are clearly acutely toxic and pose signiﬁcant long-term risk, alternatives are not necessarily better. One possibility is to use synthetic pyrethroids, but they have potential environmental problems and resistance by sheep scab mite has been shown in some areas. Other factors to consider include runoff from dips into surface water, which has been shown as a signiﬁcant environmental problem (6). OP use in salmon farming has also been criticized.

Background to Risk Due to Toxicity

325

These various papers refer to OP use in the so-called developed world. Standards of use and acceptance of risk are almost certainly different in other environments. but, because diet is usually inﬂuenced by national traditions and circumstances, the risks associated with it are relevant nationally. While dietary imbalance confers risks in various, sometimes contrary directions—in terms of sucrose, ﬁber, fatty acid composition, antioxidants, and deﬁciency or excess of factors such as trace elements—the actual chemical composition of the food is also worth considering. Leaving aside chemicals that are clearly of nutritional beneﬁt, there is a host of other chemicals present, some of which are artiﬁcial (pesticides or chemicals introduced during cooking) and some of which are endogenous to the food consumed (see Box 2). Most plants, such as cabbage, contain their own chemical defenses against pest attack—so-called natural pesticides—which are present at far higher concentrations than the carefully regulated amounts of synthetic pesticides that may have been sprayed on them. As a further contrast, the synthetic chemicals have generally been far better characterized in toxicological terms than many of the natural (so they must be safe) chemicals in our diet. While individual and national diets are potential sources of adverse effects, they are at least reasonably focused. In contrast, air quality is an international and global concern that has the potential to affect everyone. Poor air quality standards have clear impact in individual cities—Mexico City and Los Angeles being good examples. As airborne pollution can cross international borders, risk becomes a matter of international concern, which requires agreement on standards of emissions from factories and so on. The unintentional export of atmospheric pollution from the United Kingdom to countries of northern Europe and the subsequent environmental damage through acid rain has been a bone of often bitter contention. Risk Perception Perception of risk is an essentially unquantiﬁable concept that is inﬂuential at three levels. r The framing of the regulatory system is such that it asks the right questions concerning the risk. r The evaluation of risks is such that societal concerns are properly taken into account. r The management of the risk is such that the perception by the risk taker is congruent with that of the risk manager. So understanding how risks are perceived is vital to their management—especially in the workplace, where disregard of risks by employees can rebound on company management in a welter of litigation and ﬁnancial regret. Lack of risk appreciation,

326

A Guide to Practical Toxicology 2nd Edition

coupled with factors such as uncomfortable personal protection equipment, can have serious consequences for a company and its employees. Before a risk can be managed successfully, it must be understood by the people who are at risk and who need to put the desired measures into practice. If their perception and appreciation of the risk is different from that of the managers, then the management process is unlikely to be successful. Deﬁning risk in terms of the probability of the occurrence of an adverse event is often easier than getting the signiﬁcance of that possibly remote event accepted by those affected by it, and hence an acceptable course of preventative action agreed. The perception of risk, particularly by the public, affects responses to risk reduction initiatives or to new introductions of processes or chemicals and cannot be ignored. This is due to the ways in which risk is perceived by the people involved. Risk that is remote in time or distance is less threatening than immediate risk; a familiar risk is more likely to be accepted than one from an unfamiliar source or one that has been poorly communicated and explained. For an observer or someone else who is not directly affected, even severe risks may not carry personal signiﬁcance, whereas for the person about to fall off the cliff, the risk is real and immediate. However, if the person is told that there is a risk that he or she will fall off the cliff in 5 years time, there is much less immediacy and so less likelihood of corrective action. In understanding risks of diseases normally present at low incidences, it could be said that any disease is rare—until you get it yourself. If a disease is brought into the personal sphere—through a friend or relative or yourself—it immediately assumes much greater signiﬁcance. Furthermore, if there is no obvious cause, responsibility may be assigned to any local factor or circumstance, especially if more than one case is present in a small group. Such local incidences may not climb above the levels of normality in a wider context but they may well be perceived as critical. Risk perception is also inﬂuenced by the position or identity of people who are given the task of explaining it. Explanation and assessment from clearly interested parties, generic “scientists,” or—especially—government will tend to be more closely questioned and ignored than that from so-called independent sources, such as campaigning organizations, that depend on creating a climate of suspicion for their funding. Increasingly, fervent dismissal by government of concerns about pesticide residues in food simply leads to greater levels of disbelief in the public perception, ably fueled by the relevant campaigning organization. There are psychological and sociological views about risk and attitudes to risk that have to be allowed for. Slovic (7) emphasizes the subjective and valueladen nature of risk assessment and indicates that it is not a purely scientiﬁc process. Risk may not be equated with danger. Risk assessment blends science and judgment and is inherently subjective; it has to take into account factors that are psychological, social, cultural, and political. In addition, any individual

Background to Risk Due to Toxicity

327

or institution tends not to be trusted in risk assessment by at least some of the subjects. The major health concerns of the public, such as cancer, are driven by personal understanding of risk and knowledge of the mechanisms; however, the smaller the understanding, the greater the concern. While cancer as an aspect of tobacco smoking is well understood, it is chieﬂy of concern to those who do not smoke, as the smokers have accepted the risk either by acknowledging it or by ignoring it. This acceptance might not prevent a smoker buying organically grown produce in the belief that it has fewer pesticides and carries less risk as a result; there is even a market for organic tobacco. The disparity between the risks associated with smoking and the risks associated with minimal amounts of safety-tested pesticides is not a factor to be considered. One risk (the lethal one) is acceptable while the other is not. Another factor is that risks are often perceived and considered in isolation, without considering that risk in one sense may be offset by beneﬁt in another or vice versa; in other words, risk is often two sided. Organically grown or stored peanuts may have higher levels of aﬂatoxins due to the uncontrolled presence of mold, which is usually absent in peanuts treated with pesticides. Aﬂatoxins are highly potent carcinogens and carry a higher risk than the pesticides. Removing one risk often means promoting another to the same or a higher level. One risk may be enhanced by another; the risk of occupational cancer is often increased in smokers or by excessive alcohol consumption. Data that appear to indicate differences in risk are another source of false perception. Deaths from cancer may be higher in a poor industrial town than in one that is academic and rich. However, the incidence of cancer could well be the same in the two areas and the apparent difference is due simply to a disparity in health-care standards. Risk perception is one of the factors in the widespread rejection of genetically modiﬁed crops and foods. In this case, poor communication has exacerbated the problem to the extent that any beneﬁt from this technology is likely to be wasted on a wave of public rejection that is—in part at least—ill-informed. Box 2 gives a simplistic overview of this contentious area. Normal agricultural development of new strains of animal or crop is genetic modiﬁcation through selection of desirable characteristics via breeding programs; the critical difference is that normal agricultural development does not involve the insertion of genes from different species. Although genetic modiﬁcation can produce plants with excessive concentrations of endogenous chemicals or with allergenic proteins (although this has not been proven in any marketed food), these risks could be managed. For foods that are unacceptably hazardous to certain individuals—for instance nuts— genetic modiﬁcation holds out the possibility for the removal of unwanted genes from foods; nonallergenic peanuts might have considerable attraction to some people.

328

A Guide to Practical Toxicology 2nd Edition

Box 2 Genetically Modiﬁed Foods r Genetic modiﬁcation introduces new genetic material, from bacteria or other

r

r

r

r

r

r

species, into a plant’s genotype to express a characteristic such as longer shelf life, better ﬂavor, or resistance to pesticides or pests. The action of these inserted genes and their proteins can be very speciﬁc, as in the Bt protein expressed by Bacillus thuringensis DNA inserted into genetically modiﬁed maize to give resistance to corn borer. Toxicological risk may be expected in two areas—environment and human health. The former may be seen through effects on wild populations or increased use of pesticides; the latter might be associated with food intolerance, toxicity, or factors such as induced resistance to antibiotics. Differences from “traditional” crops are loosely classiﬁable according to type of chemical expressed—similar or dissimilar to those in normal human metabolism. “Similar” would include nucleic acids and proteins. “Dissimilar” would include small molecules such as endogenous alkaloids, which can be present at toxic concentrations in new strains; a new strain of potato (produced without genetic modiﬁcation) was found to have acutely toxic concentrations of solanine and chaconine and was withdrawn (8). “Similar” chemicals are likely to be lost safely through natural biochemical pathways; “dissimilar” chemicals are subject to the normal processes of ADME for small molecules and associated with adverse effects such as the anticholinesterase activity shown by solanine (8,9). Adverse effects on human health are dependent on the composition of the foods and the crops from which they are derived and are most likely to arise from ingestion. However, dermal exposure can also be signiﬁcant. A new insect-resistant celery was associated with rashes and burns when handling was followed by exposure to sunlight; subsequently, it was found that the new variety contained sevenfold more psoralens than normal celery. Genetic modiﬁcation of food crops might be expected to be associated with allergic reactions. Allergens are mostly proteins and only a small percentage of dietary protein is allergenic. If the protein expressed is similar to a known allergen (e.g., a nut-derived protein), then there is a risk that the new food will also be allergenic. As a basic rule, genes should not be transferred from known allergen sources (10). Food has always been associated with certain risks. Genetic modiﬁcation may also pose risks to the environment, where effects may include gene transfer or toxicity to nontarget insects such as butterﬂies, as a result of excessive expression of proteins such as Bt. Pollen from a variety of Bt corn expressing high levels of Bt protein was reported to be toxic to monarch butterﬂy caterpillars when it fell on the leaves of milkweed plants growing among the crop (11).

Background to Risk Due to Toxicity

329

r Transfer of genes for herbicide resistance has been reported in sugar beet and in some weeds so that weeds and crops have become resistant to several herbicides (12,13). r Narrow spectrum of action of some genetic inserts may mean that use of pesticides is still needed when the crop is attacked by other, unaffected, pests (14). The above should not be taken as evidence for banning genetic modiﬁcation. Hazards have been identiﬁed in terms of food content and environmental effect, but risk is determined by local circumstances, such as individual susceptibility and the concentrations of proteins or chemicals expressed in the crop or food, together with local conditions. With appropriate management and some lateral thought, the risks can be reduced and managed; with looming food shortages this is becoming imperative.

Acceptability of Risk Clearly, risk perception has a considerable inﬂuence on the acceptability of risk, which may be seen from two angles, that of the public and that of regulators; these are frequently different. The type of hazard and its characteristics deﬁne the acceptability of its expression. Increased risk of irreversible change such as birth defects is unacceptable to a greater degree than a minor effect that is seen to be transient. When a transient effect turns out to have long-term consequences, the acceptability of the risk is likely to change. In ofﬁcial terms, acceptability of risk is expressed in incidences; one additional death in 1 million due to cancer appears to be acceptable, although, in practice, this would not probably be detectable unless the cancer was unusual. Acceptability and Tolerability of Risk The relationship between risk and beneﬁt (or risk/beneﬁt ratio) is a critical factor in determining the acceptability of risk due to toxicity. An acceptable risk is one acceptable in all circumstances. A tolerable risk is one that can be accepted because some beneﬁt is obtained by tolerating the risk. As a broad rule of thumb, tolerability of risk increases with increasing beneﬁt, including for instance, in medical circumstances, reduction in debility due to severity of disease. Tolerability is very difﬁcult to quantify and is inﬂuenced by perception of the risk. Often, it is a matter of judgment, which tends to be conservative and hence to disproportionately favor minimizing risk. At the either end of the risk/beneﬁt spectrum, this judgment is relatively easy; signiﬁcant toxicity is acceptable in cancer drugs but is not tolerated in analgesics sold without a prescription. In the middle of the spectrum, however, the choices can be much harder. For more serious inﬂammatory conditions such as rheumatoid arthritis, where long-term treatment of a wide range of patients could be expected, a greater degree of risk would

330

A Guide to Practical Toxicology 2nd Edition

probably be allowable but, for example, reproductive effects or human-relevant carcinogenicity would not. Although signiﬁcant toxicity may be acceptable in a cytotoxic anticancer agent, as cancer drugs become more receptor speciﬁc, it is likely that they too will have to conform to expectations of low toxicity. According to indication, some toxicities may be more acceptable than others. Diabetes is associated with a number of clinical effects and any toxicity that might act to enhance these effects or accelerate the progress of the disease would not be acceptable.

Comparative Risk Risk usually has a comparative element that needs to be considered in any assessment, most simply as a risk/beneﬁt analysis. When considering a chemical that has been developed for a particular purpose, the advantages of its use should be considered as well as the disadvantages. This is also true when looking at chemicals that have been used for many years but then are shown to be associated with toxicity. Replacement of a toxic chemical with an essentially unknown substitute is not necessarily better, as long-term experience with the substitute can show different hazards that may also be undesirable. Thus, benzene was replaced by toluene in the 1970s when it was found that benzene is a carcinogen; long-term experience with toluene has demonstrated a number of chronic effects including neurological deﬁcits that include CNS depression, peripheral neuropathy, encephalopathy, optic neuropathy together with a variety of other toxicities (15). Different forms and concentrations of the same chemical will probably be associated with different levels of risk. Hazards posed by different chemicals may be similar but have different risks attached to them; also, hazard does not necessarily imply signiﬁcant risk. Comparative risk is valid for single uses of chemicals but should also be considered across different origins, chemical groups, or boundaries of use, such as when a pesticide is reassessed for medicinal use. Risk, therefore, should not be considered in isolation; Box 3 looks at elements of comparative risk and seeks to put some perspective on this. Comparison of risk is also valid across location; a risk that is unacceptable in the United States may be tolerable in a less-developed country due to local circumstances. Use of a carcinogenic pesticide is unlikely to be acceptable in a developed country because life span is long enough to allow expression of the cancer; where life span is shorter, this risk could possibly be acceptable (16). Other circumstances may be more important, such as the cost of alternatives, for example in the control of malarial mosquitoes and consequent reduction in disease. The environmental fate of the pesticide and the associated environmental risks may well be similar in both locations, but the consequences for human longevity may be completely different.

Background to Risk Due to Toxicity

331

Box 3 Elements of Comparative Risk The following list is not exhaustive: r Similar hazard, different risk. This may be seen for single chemicals and

r

r

r

r

r

r

between different chemicals or chemical groups and may be a function of relative potency, formulation, place of use, physicochemical characteristics, bioavailability, etc. Comparative risks for lead are seen in paint, car fuel, drinking water, organic or ionic, or on church roofs. Origin: endogenous/nonendogenous or natural/synthetic. Natural chemicals are not less toxic than synthetics; they may act as precursors to safer synthetic chemicals. Synthetic chemicals include pyrethroid insecticides developed from pyrethrum in chrysanthemums and antibiotics developed from penicillin (8). Location. Risk that is unacceptable in one environment may be offset by beneﬁts in other places. Ceasing chlorination of the public water supply in Peru, due to perceived risk of cancer, was offset by the major cholera epidemic that resulted (17) (see text). The cost/beneﬁt of pesticide use changes with different circumstances of the environment or country in which it is used. Intended use. Warfarin is an effective rodenticide but is also used as an antithrombotic drug. The form (bait preparations) in which the use as a pesticide is permitted may therefore be controlled; its use as a drug is also controlled but is subject to other factors, such as comedications, that alter the risk factors for the anticoagulant hazard of its use, for example, by competing for protein-binding sites and increasing the amount of free warfarin in the plasma. Production. Organic produce is widely marketed as “better” than produce grown or treated with pesticides or preservatives. Untreated peanuts may contain unacceptably high levels of aﬂatoxin due to contamination with the mold Aspergillus ﬂavus. Substitutes. An apparently nontoxic substitute may have unsuspected longterm effects of a different kind to the original. In proposing a substitute, there is an onus to ensure that it is less toxic than the original chemical. (See Box 6, chapter 16 and associated text on methylene chloride.) Type of exposure. Risk due to low-level radiation from nuclear plants may be contrasted with the risk of melanoma due to sunbathing.

It may be concluded that concentrating effort on reducing one risk is pointless if other factors pose similar or different risks that are greater. There comes a point beyond which effort to reduce risk becomes an expensive waste of time and money. Differing national standards of water quality have also been a factor in bringing to light unexpected hazard and risk. In the United States, it was indicated

332

A Guide to Practical Toxicology 2nd Edition

that chlorine in the drinking water could be associated with a small increase in the risk of bladder cancer. Chlorination of drinking water was found to be associated with the formation of chlorinated organic compounds, some of which were mutagenic in the Ames test. The U.S. EPA concluded that chlorination of the public supply was no longer necessary. This decision was noted in Peru and it was decided that what was good in the United States should also be reﬂected in local policy and that water should not be chlorinated. This did not take into account the differing microbiological properties of the local public water supplies and, as a result, large numbers of people died in the cholera epidemic that followed (17). Risks associated with the differing uses of warfarin have already been mentioned in Box 3. Another topical example is the use of cannabis- and cannabinolrelated compounds in therapeutic applications, as against use as a drug of leisure. As always in risk assessment and management, it is useful to invoke Paracelsus, that the dose makes the poison. Given the pharmacological activity of cannabinoids and evidence of their beneﬁt in a range of disorders, it seems less than sensible not to investigate their use more extensively. In considering the risks associated with use of cannabis, the comparative risks of alcohol and nicotine should also be considered. Once again, it seems that science and politics are, to all intents and purposes, incompatible. Synthetic Versus Natural One of the greatest public debates in comparative risk has been on the merits or otherwise of natural versus synthetic chemicals. Many synthetic chemicals have similar counterparts in nature to which humans have been unwittingly exposed for centuries, without epidemiologically perceptible effect. Although there is a great suspicion—fear even—about synthetic pesticide residues in food, it is seldom remembered that these chemicals are far outweighed by those that are present naturally. This emphasis is disproportionate; the synthetics are present in low, regulated concentrations and have all been thoroughly tested for safety, unlike the vast majority of natural chemicals. Concentrations of synthetic pesticides are further reduced by setting the interval between spraying and harvest. Natural chemicals in foods are essentially unregulated; for the most part, there are no epidemiological data that indicate necessity for regulation and, in any case, the database is not present to allow any sensible limits to be put in place. In fact, when natural chemicals are tested, a potentially alarming number of them are associated with unwelcome toxicity, often with a low margin of safety (Box 4). Given the structural similarities between synthetic and natural chemicals, there is no scientiﬁc future in trying to draw a toxicological distinction between them: synthetic does not mean toxic, and natural is not always beneﬁcial. The structures of some natural chemicals are so complex as to make them very difﬁcult to synthesize in a laboratory, yet these same comfortingly “natural” chemicals include some of the most toxic substances known. Batrachotoxin is a structurally complex alkaloid found in the skin of the Columbian frog, Phyllobates aurotaenia,

Background to Risk Due to Toxicity

333

which has an LD50 in mice that is in single ﬁgure micrograms; few chemicals that are exclusively synthetic approach this level of lethal toxicity. Another consideration is that there are many times more natural chemicals than there are synthetic ones; also that many toxic chemicals considered to be artiﬁcial, like dioxins, are present in the natural environment through processes such as burning wood. Box 4 Risk and Chemicals Naturally Present in Food In 1999, the American Council on Science and Health published a holiday dinner menu (18) to coincide with the Christmas festivities, to demonstrate just how much of our regular diet is made up of potentially toxic chemicals, that are there naturally and in larger quantities than artiﬁcial chemicals such as pesticides. r Endogenous plant chemicals include an assortment of alcohols, aldehydes,

r r

r

r

r

isothiocyanates, heterocyclic amines, carbamates, psoralens, caffeic acid, hallucinogens, and large numbers of known rodent carcinogens such as benzo(a)pyrene and ethyl alcohol (which is also a human carcinogen). It has been shown repeatedly that high intake of fruit and vegetables protects against cancer, despite the fact that they contain chemicals that have been shown to be rodent carcinogens. White bread contains furfural, which is a rodent carcinogen. The carcinogenic dose in rodents was 197 mg/kg/day; the equivalent human dose would be 13.79 g/day for life; given that a slice of white bread contains about 167 ␮g of furfural, you would have to eat 82,600 slices of bread a day to achieve an equivalent carcinogenic dose. Although the emphasis is often placed on carcinogens, “ordinary poisons” are also present. Potatoes contain the glycoalkaloid solanine, which is a cholinesterase inhibitor and teratogen (19). Concentrations are much higher in green potatoes—about 2 mg/g compared with 0.1 mg/g in normal potatoes; the human lethal dose is about 500 mg (20). Concentrations of such alkaloids can increase after harvesting through exposure to light or damage (21). There has even been a suggestion that the potato may be the “environmental culprit” in schizophrenia (22). The safety margin between normally present concentrations and those that are toxic in humans is not large. Severe toxicity is associated with improperly prepared food plants such as cassava root, in which cyanogenic glycosides react with stomach acid to release cyanide. Red kidney beans produce toxicity unless boiled before eating. Edible mushrooms contain various hydrazines that have been associated with cancer in mice (Box 2, chapter 1).

Against this background, the Delaney amendment for food additives—that no additive found to cause cancer in animals after oral ingestion shall be deemed safe—seems a little redundant.

334

A Guide to Practical Toxicology 2nd Edition

Use of pesticides or preservatives has two sides in terms of relative risk, that is, risks associated with their use and those associated with not using them. A decision not to use pesticides because they are toxic ignores the natural presence in our diet of vast amounts of naturally present chemicals that have evolved as endogenous defenses against insect attack (see Box 4). Poor preservation of food—in an effort to maintain organic standards or production or for lack of facilities—can be associated with the growth of molds. Products from these include aﬂatoxin (a potent hepatocarcinogen found in peanuts) and ochratoxins, which have been associated with the prevalence of Balkan Endemic Nephropathy. When considering risks associated with pesticide use, it is also worth looking at the increasing consumer enthusiasm for organic food produce, driven by the perception that “pesticides are bad for you.” This has led to production of increasingly insect-resistant varieties so as to avoid the use of pesticides. This can result in insect-resistant crops that contain higher than normal amounts of endogenous chemical, leading to adverse effects. Thus, organic produce has at least the same amounts of natural chemicals as nonorganic food and may have more; the absence of pesticides makes a small difference to the overall chemical burden (8). In the ﬁnal analysis, there is no dispute that pesticides are toxic but, as with every other chemical, this is very much a question of dose and the margins of safety between toxic concentrations and those acceptable in foods are regulated. Frequently, these regulated margins are larger than for endogenous chemicals, such as solanine. In conclusion, consideration of comparative risk is essential in risk assessment of new or existing chemicals; there is no scientiﬁc point in setting stringent limits of exposure on a new chemical, if similar levels of hazard and risk are posed by an endogenous chemical present at greater concentrations. Too frequently, the public and politicians are blind to such comparison; I think that it is one of the responsibilities of toxicologists in general to communicate this aspect of risk assessment in a more effective manner. Risk Expression and Quantiﬁcation Risk is the probability of harm and could, therefore, be expressed as a number between one and zero. In practice risk is expressed in terms of incidence per unit of population or as a percentage. Expression as an incidence—y cases per 100,000— is useful in terms of the general population, within which the wide range of risk determinants that affect speciﬁc groups or individuals can be accommodated without too much problem. A reﬁnement of this is to compare risk in an exposed population with that in an unexposed population. Expression of relative risk implies some knowledge of normality, that is the unexposed population. Normal mortality in Scotland is about 12 per 1000 population (23) (Scottish Executive website), possibly a little higher than in England. The same sources give access to a plethora of normal data for the incidences of disease and resulting mortality. There may be circumstances in which it is possible to say that a percentage of people exposed to a chemical will probably show a particular adverse effect—as

Background to Risk Due to Toxicity

335

in patients receiving monotherapy with a speciﬁed drug—but this tends to be an exception. Although the dose makes the poison, it is the individual who makes the response and doses that leave many people unaffected can leave others severely disabled. It is this breadth of characteristic and potential response that complicates numeric expression of risk in terms of particular groups or individuals. In assessing the risks associated with production of a drug, it is simple to look at the incidence of reported adverse reactions in patients receiving known doses and to extrapolate these data to new patients. However, extrapolating these effects to a group of healthy production workers, who do not have the disease target for the drug and who will be subject (theoretically) to lower than therapeutic systemic exposures, becomes so imprecise that numeric expression is not possible, even if it was legally sensible. Another, sometimes useful, but easily devalued, method of risk expression is to use the doses associated with effect in animal studies and to extrapolate from these to the anticipated human dose. This can lead to seemingly ludicrous similes, such as drinking 400 bottles of cola a day while standing on top of a mountain (see Box 4). However, this method is particularly useful when looking at the risks associated with pesticides or natural chemicals. It is sometimes also useful to consider the factors that might increase the probability of death by one chance in a million. These include living with a cigarette smoker for 2 months, eating 40 tablespoons of peanut butter, or living for 150 years within 20 miles of a nuclear power plant (17). Although it is desirable to quantify risk when looking at high-level assessments, for instance in terms of carcinogenicity, for the most part this is not particularly easy or necessary. For a workplace assessment, it is enough to know that there is a hazard to be controlled and that a reasonable estimate of risk can be made in general terms. This is arrived at by consideration of the various factors that contribute to the risk of the hazard being realized.

SUMMARY r Risk is seen at different levels, from individuals to worker groups to national and global populations. r Risk is increased or decreased by factors that include occupation, diet and lifestyle (smoking or alcohol consumption), and local circumstances. r Risk of use may be offset by risks associated with nonuse. r Perception of risk, which is critical to successful risk management, is not necessarily subject to logical analysis. Perception is inﬂuenced by clarity and perceived honesty of communication and the acceptability of the risk expected. r Risk may be quantiﬁed but this is usually only done for end points such as carcinogenicity after extensive mathematical modeling. For general purposes, a qualitative assessment is enough.

336

A Guide to Practical Toxicology 2nd Edition

REFERENCES 1. Stephens R, Spurgeon A, Calvert IA, et al. Neuropsychological effect of long-term exposure to OPs in sheep dip. Lancet. 1995; 345(8958): 1135–1139. Commentaries and authors’ reply. 2. Pilkington A, Buchanan D, Jamal GA, et al. An epidemiological study of the relations between exposure to OP pesticides and neurological indices in sheep farmers. Occup Environ Med. 2000; 58(11): 702–710. 3. Mutch E, Blain PG, Williams FM. Interindividual variations in enzymes controlling OP toxicity in man. Hum Exp Toxicol. 1992; 11(2): 109–116. 4. Geldmacher von Mallinckrodt M, Diepgen TL. The human serum paraoxonase polymorphism and speciﬁcity. Toxicol Environ Chem. 1988; 18: 79–196. 5. Mackness B, Durrington PN, Mackness MI. Low paraoxonase in Persian Gulf war veterans self-reporting Gulf War Syndrome. Biochem Biophys Res Commun. 2000; 276(2): 729–733. 6. Virtue WA, Clayton JW. Sheep dip chemicals and water pollution. Sci Total Environ. 1997; 194/195: 207–217. 7. Slovic P. Trust, emotion, sex, politics and science: Surveying the risk assessment battleﬁeld. Risk Anal. 1999; 19: 689–702. 8. Ames BN, Profet M, Swirsky Gold L. Nature’s chemicals and synthetic chemicals: Comparative toxicology. In: Proceedings of the National Academy of Sciences of the USA revised 1990 and ‘Dietary pesticides (99.99 per cent all natural). 9. Ballantyne B, Marrs T, Syversen T. General and applied toxicology 2nd ed. London: Macmillan Reference, 2000. 10. Taylor SL, Heﬂe S. Will genetically modiﬁed foods be allergenic? J Allergy Clin Immunol. 2000; 107(5). 11. New Scientist 11 September 2001. 12. New Scientist 19 February 2000. 13. New Scientist 21 October 2000. 14. New Scientist 18 December 1999. 15. Ellenhorn MJ, Schonwald S, Ordog G, et al. Ellenhorn’s medical toxicology: Diagnosis and treatment of human poisoning. 2nd ed. Baltimore, MD: Williams and Wilkins, 1997. 16. Illing P. Toxicity and risk—context, principles and practice. London: Taylor & Francis, 2001. 17. Kellow A. International toxic risk management. Cambridge: Cambridge University Press, 1999. 18. American Council on Science and Health website. http://www.acsh.org/. 19. Friedman M, Rayburn JR, Bantle JA. Developmental toxicity of potato alkaloids in the frog embryop teratogenesis assay–Xenopus (FETAX). Food Chem Toxicol. 1991; 29(8): 537–547. 20. Lappin G. Chemical toxins and body defences. Biologist. 2002; 49: 33–37. 21. Friedman M, McDonald GM. Postharvest changes in glycoalkaloid content of potatoes. Adv Exp Med Biol. 1999; 459: 121–143. 22. Christie AC. Schizophrenia: Is the potato the environmental culprit? Med Hypotheses. 1999. 23. Scottish Executive. Health in Scotland 2000. http://www.scotland.gov.uk.

14 Risk Assessment in Practice and Setting Exposure Limits

INTRODUCTION We are now at the point where the hazards have been predicted to be humanrelevant (see chapter 12). The information from these earlier stages is assessed to indicate the probability that the toxicities seen will be expressed in the target population under the anticipated conditions of exposure, which are usually assessed and evaluated on a worst-case basis. This probability is governed by factors such as safety margins, working practices, and form of chemical (see Box 1). In essence, in a risk assessment, the toxicity of the chemical, related to dose levels in safety tests, is considered in conjunction with anticipated exposure levels for the target population. This should lead to an assessment of the likelihood that toxicity will be expressed in the target population (a margin of safety), facilitating decisions on risk (risk evaluation) and hence exposure limits (which are set as the maximum exposure considered to represent a “broadly acceptable” risk/safe for that particular type of exposure). These limits and controls must be reevaluated in the light of the intended measures to be taken to control exposure in the target population and when new information/new interpretations come to light. Firstly, it is necessary to deﬁne hazard and risk. Hazard is the property expressed by a chemical or mixture—for example, peripheral neuropathy due to solvents in paints. Risk is essentially a probability that the hazard will be expressed (in a given population/set of circumstances). With the evolution of understanding of the effects of solvents such as n-hexane, which is a peripheral neurotoxin, the composition of paints has changed so that they now contain little or no n-hexane. Consequently, the risk of acquiring peripheral neuropathy due to n-hexane in paints is much lower than it used to be. In contrast, the understanding of the effects of 337

338

A Guide to Practical Toxicology 2nd Edition

toluene, currently a common constituent of nonaqueous paints, is growing with an appreciation that chronic exposure to this solvent may also be associated with long-term neurological effect. Unlike the situation with n-hexane, however, there is currently no neat molecular mechanism for these effects. RISK ASSESSMENT AS A PROCESS Risk assessment is a well-deﬁned process, consisting of four interrelated stages, the ﬁrst three of which are hazard identiﬁcation, deﬁnition of dose response, and assessment of exposure, as shown in Figure 13, chapter 1. The information gained from these three processes is then fed into the fourth risk: characterization. These processes are distinct from risk management, which is the process of evaluating the risks; deciding on whether those risks are acceptable, tolerable, or intolerable; and deciding on risk management procedures. Risk management puts the risk assessment into effect, determining acceptable daily intakes (ADI) for consumers or workplace exposure limits for production workers. It also considers precautions to be taken when these chemicals are used, considers any restrictions on who can purchase and use these chemicals, and monitors to ensure that the risk management proposals are effective and are being enforced. REACH (Registration, Evaluation, Authorisation (and restriction) of Chemicals) is the umbrella process which will drive much chemical risk assessment and management in the European Union in the coming years, and it will use the hazard characterization descriptors contained in the nascent Globally Harmonised System for classiﬁcation and labeling of chemicals. DATA QUALITY Data quality is one key to successful or at least meaningful risk assessment. The second is knowing what you are seeking to achieve: a margin of exposure (MOE) or a maximum acceptable/tolerable level of exposure—the former is a risk characterization, and the latter is a risk characterization and evaluation rolled into one. The former requires exposure data, but the latter does not. Risk assessment is the end stage of toxicological evaluation, and it uses data from a wide variety of study types, ages, and provenance. It may be complete or exiguous, of uniformly good quality, or so poor as to be unusable. It goes without saying, therefore, that the quality of data available is fundamental to the success of any risk assessment; this is particularly an issue for older chemicals. Poor data will inevitably result in a poor, or at the least conservative, risk assessment. For every review, but especially where the database is old and of dubious provenance, an assessment of data quality is an integral part of the process. A loose classiﬁcation of data may run from high to medium to acceptable or unacceptable, based on aspects such as compliance with GLP, experimental design and reporting, and age of publication. Klimisch et al. (1) proposed a systematic approach for evaluating the quality and reliability of toxicological and ecotoxicological data. The main points they raised were reliability, relevance, and adequacy, as follows:

Risk Assessment in Practice and Setting Exposure Limits

339

r Reliability: data may be described as reliable without restriction, reliable with restriction, not reliable, and not assignable. r Relevance: based on factors such as in vivo versus in vitro, test material, end point studied, test system, etc. r Adequacy deﬁnes the utility of the data for risk assessment. If there is more than one study for an end point, use the more reliable one. Are the data ﬁt for purpose? Relevance may be inﬂuenced by factors such as test system or age of the data. For instance historical data may not reﬂect current reality, as with lead exposure. If an inappropriate test system or human population is used in the study, it is possible that its relevance may be reduced. Likewise, exposure by parenteral injection is unlikely to be relevant to a situation where exposure is exclusively dermal. If it becomes necessary to support your risk assessment with data from another compound, it is clearly important to ensure that the compounds are comparable in structure and use. Variable quality of data may be attributed to a number of causes. Klismisch et al. suggested the following factors that should be considered: the use of test guidelines not compatible with modern standards; poor characterization of the test substance (e.g., for purity or other physicochemical parameters); the use of techniques superseded by more modern methods; and absence of measurement for end points that should normally be expected. Incomplete reporting of data is a perennial problem either because the paper was targeted at particular end points, excluding the ones of modern interest, for lack of space or a host of other reasons. Data quality drives the conservatism of the assumptions and the security of the whole risk assessment. Poor quality data may inﬂuence the selection of the end point on which the risk assessment is based and may result in choice of an inappropriately high or low No Observed Effect Level (NOEL) or No Observed Adverse Effect Level (NOAEL); this in turn is likely to affect the margins of safety used and any acceptable exposure limits that may be decided. At worst, it can result in extra testing and may affect the commercial viability of continued use and production of the chemical. In looking at a data set, it is important, therefore, to ask a number of questions. These include checking if the studies were conducted to Good laboratory and clinical or scientiﬁc practices; if the description of the methods and study design is adequate; if the data are reported completely; or if selected group means with or without standard deviations or standard errors of the mean are reported. For human reports, does the paper relate to a case report or to a full study?

DATA SELECTION FOR RISK ASSESSMENT For new notiﬁcations of chemicals or modern data sets, selection is not—or should not be—a problem. Frequently, however, the chemical being assessed is old or

340

A Guide to Practical Toxicology 2nd Edition

well established and the amount of data available can range from close to nothing to vast numbers of dubious academic papers from the 1960s and 1970s. This will become a critical problem when REACH comes fully into force. When there is a large data set available, choice of study or report becomes critical in determining the success of the risk assessment. It is important to identify a critical end point and a pivotal study which demonstrates the most sensitive species or most relevant end point and gives a clear NOEL or NOAEL. For small data sets, there may be little choice as to which studies to select, and it may become necessary to look outside the data set at comparable compounds. In looking at the types of data available, these are broadly classiﬁable as experimental (usually in nonhuman species), epidemiological (including case studies of individual exposures, usually accidental), and, of course, physicochemical data. Experimental data are often the strongest part of the database and may result from a focused program of studies. Specialist regulatory studies should be reliable if conducted in laboratories of good reputation, and newer academic work is often well designed and reported. In modern work, test systems are usually well chosen and understood. However, such robust data are usually present only for new substances. Older substances are often associated with poorly designed studies, which have been poorly conducted and incompletely reported. Old substances are often associated with a mass of unacceptable reports of low quality and little relevance. In these circumstances, choice of publication becomes critical. Given the stark reality of many risk assessment situations, it is sensible only to give a listing of the types of data that are desirable rather than lay down a list from which deviation is not acceptable. These include: r r r r r r r r r r

Prediction using computer-based and in vitro models Physicochemical properties Absorption, distribution, metabolism, and elimination (ADME) Acute and repeat dose toxicology Reproductive toxicity Genotoxicity and carcinogenicity Sensitization, irritation, or corrosion Human experience or epidemiological studies Exposure estimates NOELs and/or NOAELs

Comparison of one structure with another—known as read across—may become necessary but should not be used to support an entire risk assessment. If both data sets are weak, however, it should be realized that the risk assessment itself will be weakened. Read across is appropriate with similar chemical classes or structures and if the end points assessed are the same or if they have similar uses or targets.

Risk Assessment in Practice and Setting Exposure Limits

341

SINGLE EFFECT VERSUS GENERAL RISK ASSESSMENT The end goal of risk assessment is an expression of risk in a quantitative or qualitative form. Although all hazards are assessed, risk assessments tend to fall into two overlapping types—broad assessments which look at all the relevant end points and those focused on a single effect. The latter may be described as highlevel assessments, typically conducted for carcinogenicity and using data from rodent bioassays in conjunction with mathematical modeling to give a numeric estimate of risk for a general population. This focused type of assessment, which is an extension of the broad overview, is discussed brieﬂy here but is not the main focus for this book; they are covered in detail in other texts (see Bibliography). The general multi-end-point approach forms the basis of all assessments and is more likely to produce a qualitative gradation of risk estimate from likely to unlikely. The output is dependent on expert interpretation and discussion of all the data and this essentially opaque and indeﬁnable process concludes with an overall interpretation that results in proposals for maximum exposure levels. Due to the lack of easy deﬁnition of process and decision pathways, it is important that records are kept on how and why the decisions were reached. These records may well become signiﬁcant in a court of law or in discussion with regulatory authorities such as the U.K. Health and Safety Executive. They also help in the communication of the decision to those at risk, particularly if the decision is unwelcome in any way. Although assessments may focus on particular hazards or effects, it is quite usual for a compound to show several different toxicities and these may be differently expressed according to dose or concentration and design and type of the experiment. All may be more or less relevant to humans, although only one may be relevant to the target population for whom the risk assessment is intended. The above gives an indication of the broad approach to risk assessment, which should give a basic foundation on which to build a set of assessment practices. There is no sense in laying down dogmatic rules for such assessments because the circumstances of each type (whether for agrochemicals, industrial chemicals, drugs or food additives) and for each compound, differ to such an extent that they cannot be covered in detail here. As stated earlier, the single end point assessment is an extension of the general assessment on which it is ﬁrmly based. These assessments are conducted typically for carcinogenicity and are often more relevant to the population in general rather than speciﬁc groups or individuals. They rely on numeric data from carcinogenicity bioassays and extrapolation from the low dose to the exposures that may be allowable in humans. For situations where the general population are already in contact with the chemical—for instance in the diet—these assessments can give an estimate of the existing risks associated with continued use. The weakness of this single end point approach is that the other risks associated with the chemical may be forgotten, and the data on which they are based and the way in which they are manipulated may be of questionable relevance to humans.

342

A Guide to Practical Toxicology 2nd Edition

They are, however, based on deﬁned mathematical models and produce numbers via a traceable process. While a numeric output may give a degree of comfort to the assessors, regulators, and the general public, it does not necessarily mean that the conclusion drawn from these numbers is any more secure or sensible than one arrived at by a more ﬂexible or broader method. Judgment, which is rarely traceable and sometimes difﬁcult to explain, should always play a part in the ﬁnal conclusion. Various aspects of this approach are covered in a brief discussion of models used (below) and later in a section on risk assessment in carcinogenicity (chapter 16). For those who would like greater detail, there are speciﬁc and general texts cited in the Bibliography. TOOLS AND MODELS IN RISK ASSESSMENT There is a number of data-handling tools and models that can be used to assist with risk assessment. This short section looks brieﬂy at physiologically based pharmacokinetic (PBPK) modeling, allometric pharmacokinetic scaling, and at models for carcinogenicity data treatments. PBPK Models and Scaling The principle of PBPK models is relatively simple, although their design, validation, and mathematical complexity are not; the following is a very basic account. If the factors known to affect the ADME of a chemical—liver blood ﬂow, partition coefﬁcient, distribution into tissue compartments, and the kinetics of metabolism and excretion—are known for one or more species at several doses, it is possible to extrapolate the dynamics from known (tested) doses to higher or lower doses and from one species to another. One of the objectives is to predict the behavior of small doses in humans from the behavior of higher doses used in animals. PBPK models can also be used to study the relationship between predicted tissue concentrations and toxic effect. Initially, a model is constructed, which consists of a series of compartments that are linked by blood ﬂow, the whole being represented by a diagram (Fig. 1). Basic rules are applied to the design so that tissues which play a prominent role in the pharmacokinetics or toxicodynamics of the compound are individually speciﬁed in the model. Other tissues can be grouped together as single compartments, distinguishing tissues with high blood ﬂow from those which have low perfusion rates. These are then linked by a series of kinetic expressions describing the movement of the chemical or its metabolites between compartments. Values for parameters such as blood ﬂow through the liver or kidneys or pulmonary characteristics can be obtained from the literature. These are linked to parameters for the chemical or its metabolites such as partition coefﬁcients and binding afﬁnities for proteins or receptors and to biochemical values for ADME. It should be borne in mind that much toxicity is associated with thresholds and that such thresholds are in turn associated with saturation of a process such as elimination or with exhaustion of a protective agent like glutathione. The

Risk Assessment in Practice and Setting Exposure Limits

Venous blood

343

Arterial blood

Gastrointestinal tract (absorption)

Liver (metabolism and excretion) Well perfused tissues (kidney excretion)

Fat tissue (accumulation)

Poorly perfused tissues (muscle and skin)

Lung blood

Inhaled gas

Lung alveolar space

Exhaled gas

Figure 1 A simple physiologically based pharmacokinetic model. Source: From Ref. 22.

presence of thresholds and the consequent drift from linear kinetics complicates the mathematics considerably. The model can then be validated against experimental data (or such data could be used in the design stages). By adjusting parameters such as dose in the model, it is possible to predict concentrations in various tissues either of parent compound or its toxic metabolites and so to predict effect. In this way, the effects at doses used in toxicity tests may be used to predict the dynamics at low doses in the same species or by extrapolation to another species. Extrapolation of pharmacokinetic parameters from animals to humans is a critical part of risk assessment (2). An adjunct to PBPK modeling is the use of allometric scaling, which takes account of the differences in pharmacokinetics that are seen with increasing bodyweight in animals. Broadly, small animals such as mice tend to have shorter half-lives for chemicals than larger animals such as dogs

344

A Guide to Practical Toxicology 2nd Edition

or sheep. Allometric scaling offers a method of relating bodyweight or surface area to parameters such as blood ﬂow through organs such as the liver and to pharmacokinetic parameters, particularly clearance, volume of distribution, and half-life. This allows prediction of these parameters by extrapolation from one species to another. This deceptively tidy and simple concept has encountered a number of problems. Clearance has not been well predicted (3) and the bodyweight model works best for renally excreted compounds (4). The concept of neoteny— originally meaning the retention of juvenile characteristics in an adult animal—has been invoked to make the process more reliable by taking into account the larger brain weight and longer life span of humans. There is a continuing search for more mathematically based coefﬁcients than body-derived measurements, which tends to demonstrate the ruthless quest of the numerate for greater “accuracy” of prediction. It must be asked how the resultant “accuracy” is to be judged, given that the model can only be set up on one set of characteristics and the target population is composed of thousands of highly variable individuals. In view of the degree of variation within a normal human population, 100% accuracy—or even 95% plus or minus 15%—is a chimera that cannot be achieved. Furthermore, a drive toward greater mathematical complexity could mean that the beneﬁts of scaling are lost to a signiﬁcant section of the toxicological risk assessment community and the disadvantages of this outweigh the advantages of any illusory increase in numerical accuracy. As with all such substitutes for real experimental data, the processes should be used rationally, with understanding of their weaknesses and with full explanation of how the conclusions were reached. Used appropriately, allometric scaling is a valuable tool which, as with all other methods in toxicology, provides useful data that can be used to support the whole database used for assessment. Models for Rodent Bioassay Data Mathematical models for the treatment of data from rodent bioassays for carcinogenicity risk assessments have proliferated over the years (Table 1). The intention of these models is to extrapolate a line or curve from high dose to low dose, so as to estimate dose levels that are “safe.” There is a number of such models, each one adding another layer of mathematical complexity to assessment of a single end point from data that are, in many cases, of questionable relevance to humans. To the non-numerate, the credibility, in terms of relevance and general application, of many of these models is hidden behind abstruse equations and ﬁgures and assumptions that are not relevant to all data sets. The result of this is a set of numbers that can prove to be less than perfect, when viewed in the light of subsequent experience. Because of the breadth of the target at which these models are aimed, the assumptions that go into them are necessarily imprecise and tend toward the conservative. They seem to offer a one-size-ﬁts-all approach that, intuitively, is ﬂawed because of the data they are based on (typically single end points such as tumours in mice) and the inherent absence of assessment of all the data that is necessary in “real” toxicology. The end result can be an overestimate of risk

Risk Assessment in Practice and Setting Exposure Limits

345

Table 1 Models for Risk Assessment Model

Comments

One hit

Based on the theory of single cell origin for cancer. Simple but producing conservative results Assumes a normal distribution of log tolerances. Gives an S-shaped dose–response curve Assumes that carcinogenesis has various stages necessary for the development of cancer and that effects are additive A generalization of the one hit model Another generalization of the “one hit” model Leads to an S-shaped dose–response curve Assumes a log normal distribution of individual responses

Probit Multistage

Multihit Weibull Logit Log-probit

Source: From Refs. 5, 22.

leading to an exposure limit that is conservatively low but is not scientiﬁcally justiﬁable. The cost to society of such conservatism is probably considerable, through increased cost of reduction and cleanup programs. One possible reason for the existence of such models, and their continued use with irrelevant data, is the fact that judgment is essentially unquantiﬁable and can be disputed—and frequently is. The provision of a conservative number, by a deﬁned route and model with documented assumptions and record of the data used, gives a bulwark behind which some shelter can be found; this may be a poor shield, however, to use in response to litigation. These models clearly have a valid role to play in the process of risk assessment, but that validity is not driven by the elegance of the mathematical gymnastics but by the assumptions and the data that are fed into them. There seems to have been a tacit recognition that the data used were not always especially relevant or uniformly suited to the models available, and this has been approached by attempts to make the models more able to cope with them. However, this has not been uniformly successful because the data are the problem, not the basic concept of the models themselves. The objective should be to use data that are relevant to the problem under consideration and to have a model that does not rely on unjustiﬁable (or over conservative) assumptions or fudge factors. The various models used in risk assessment are discussed in detail by SC Gad (5). One aspect of the utility of these models should be remembered: if the result is a conclusion that a particular dose or level of exposure would be associated with one additional cancer in 1 million, would this increase actually be detectable? TARGET POPULATION, DOSE, AND EXPOSURE In toxicology, risk is largely a function of exposure to the chemical under examination; if there is no exposure there is no risk. For a normal dose-response curve,

346

A Guide to Practical Toxicology 2nd Edition

risk increases with increasing dose, although dose is not necessarily the same as exposure for purposes of expression of toxicity, as a high dose may not be reﬂected in high exposure systemically or at the site of toxicity. Assessing the expected or actual dose and exposure levels is therefore fundamental to the whole process of risk assessment. There are, theoretically, two basic types of exposure, controlled and uncontrolled. Control may be exerted through the means of maximum allowable concentrations, recommended doses of drugs or preset workplace concentrations. In reality, there is a sliding scale of control, the highest level being that of a patient who is given a drug and watched while they swallow it and the least during accidents. Control is usually a remote phenomenon and assumptions of regulating authorities may be made meaningless by the practices of the end user or by unpredicted spillage. Exposure can be assessed prospectively or after the event and may be to known or unknown chemicals; in addition, it may be voluntary or involuntary. Each case poses its own challenges in assessing exposure—involuntary exposure to unknown chemicals being the most complicated to evaluate. The expression of toxicity is determined by availability of the parent compound or metabolite at the target (or site of expression); therefore, while the ambient concentrations of the chemical are important, the concentrations achieved internally or at the site of toxicity are also critical. The extent of systemic exposure is dependent on the bioavailability of the chemical for the principal route and circumstances of exposure. To distinguish these, it is probably convenient to think in terms of external exposure (e.g., an atmospheric concentration) and internal exposure, as shown by maximum systemic concentrations or area under the concentration curve. For controlled exposure, which is the exception, the analytical techniques and matrices—blood or urine usually—are very similar, the main difference being that the dose is known and can be related to the concentration data (exposure) that emerge from the analyses. Methods of assessing exposure are explored brieﬂy in Box 1. For purposes of risk assessment, the exposure levels are assessed to answer two questions: “What hazards are associated with a measured concentration?” and “What is the safe concentration of the chemical?” The outcome should be a proposed concentration or exposure level that should not be exceeded; these are usually expressed as workplace or occupational exposure limits (WEL or OEL) or ADI. The ﬁrst question may be asked in respect of an existing environmental contaminant or natural chemical. The second question is typically asked about concentrations in production facilities, so as to regulate exposure of the workforce or for setting acceptable residual concentrations of pesticides or veterinary pharmaceuticals in foods. Prediction of Exposure Prediction of dose or exposure is necessary when there is no prior knowledge of the chemical, as with a new food additive or on new or excessive release of

Risk Assessment in Practice and Setting Exposure Limits

347

Box 1 Assessment of Exposure—Basic Principles Uncontrolled exposure may be assessed by prediction or measurement, either direct or indirect. For most purposes of dose calculation, a 70-kg person is assumed, although 50 kg is more conservative, especially for female target populations. Prediction: r By ingestion: knowing the concentration of the chemical in the diet or water, together with a reasonable daily intake, allows simple calculation of dose level. For example, a pesticide present as residues on apples at 1 ppm might result in a daily dose of approximately 2 ␮g/kg, based on an average apple weight of 150 g, with a pesticide burden of 0.15 mg/apple, eaten at the rate of one a day by a 70-kg person. r For inhalation exposure, the normal pulmonary tidal volume at rest is approximately 0.5 liter and the respiration rate is between 12 and 20 breaths a minute (6). For a normal working day of 8 hours at a gentle workrate, a convenient nominal volume of air breathed is 10 m3 , based on 20 breaths a minute each of 1 liter. On this basis, a concentration of 3 mg/m3 translates into a daily dose of approximately 0.4 mg/kg in a 70-kg person. The total daily volume of respired air may need upward adjustment according to the type of work. r Bioavailability data can then be used to predict systemic exposure from the expected dose. Measurement: r Direct measurement may be made of the parent compound or its metabolites, usually in blood or urine but occasionally in expired breath, as with ethanol. These data should be speciﬁc for the chemical being assessed. r Indirect measurements use biological markers or biomarkers of effect or response, which include changes in enzyme activity or biochemical parameters such as inhibition of cholinesterase or changes in coagulation times. r DNA or protein adducts are a useful indication of exposure to reactive chemicals but are produced by numerous chemicals and, unless identiﬁed speciﬁcally, do not necessarily imply exposure to the study chemical. r Choice of matrix for analysis should be made according to the chemical under study or the type of marker to be used. a known chemical. The process of prediction may need to chart a chemical’s progress from release into the environment or situation from which exposure can be experienced to the time it comes into ﬁrst contact with people and what amounts are available for dermal or systemic exposure. The more steps between release and actual availability to the target population, the more difﬁcult it is to predict exposure accurately. For example, for a chemical carried on or in food,

348

A Guide to Practical Toxicology 2nd Edition

uncertainties such as inconsistent daily intake, absorption effects due to other foods eaten at the same time, and preparation losses make the prediction more complex and imprecise. It is worth brieﬂy revisiting the factors that affect the systemic levels found following external exposure to a chemical, bearing in mind that the duration of exposure may be over several hours each day or irregular and may not perfectly reﬂect data in safety studies. Following ingestion, the situation is relatively simple compared with dermal or inhalation exposure; systemic exposure (internal dose) is likely to be similar to that achieved in toxicity studies by oral administration. However, it is necessary to make allowance for differences in formulation and duration of exposure (once-daily bolus vs. probably constant low-level ingestion), but it should be possible to make a reasonable estimate of the amount of chemical that will be absorbed and reach the target site. For dermal exposure, the local concentration, the duration of contact, local humidity, the extent of any local vasodilation, and formulation or form of the chemical should be considered; in addition, the local effects may be more signiﬁcant than the systemic toxicity. Local concentration may be more important than dose expressed either as a total or in milligrams per kilogram bodyweight, and the effects, which may well be local, are likely to be enhanced when high workloads act to increase body heat, peripheral vasodilation, and local humidity. The presence of abrasions or skin disease, such as psoriasis, is also likely to enhance absorption across the skin. In some cases, it may be necessary to assume a worst-case scenario and assume total bioavailability, even if this is unlikely. When exposure is likely to be by inhalation, the atmospheric concentration may well be constant but dose level will be varied by changes in the breathing rate and volume or air respired, which are normal responses to changes in workrate or load. For solids or aerosols, the particle size determines the region of the respiratory tract in which the particles or droplets are deposited; the physicochemical or pharmacological properties of the material may also affect dose levels by causing avoidance behavior in people exposed to it. Clearance of insoluble solids is via the mucociliary escalator, whereas liquids or soluble chemicals are likely to remain in the tract and be absorbed. For purposes of estimating the volume of air breathed in a typical 8-hour working day, 10 m3 is often used as an arbitrary ﬁgure, being about twice the volume anticipated for a person at rest (Box 1). Ultimately, the assessment is likely to produce an exposure level that may not be achieved systemically, due to factors such as genetic polymorphisms or differences in ADME. Once an applied dose has been predicted, use of the bioavailability data for the compound should result in a reasonably accurate estimate of exposure for a given dose. Measurement of Exposure Without doubt, the best method of assessing exposure is directly by measurement of the parent compound or a metabolite in the blood or urine. This should also

Risk Assessment in Practice and Setting Exposure Limits

349

be used as a check of predicted exposure levels. Where this is not possible, the use of indirect methods may give good data from which exposure levels may be extrapolated. These measure biological markers or biomarkers of response or effect as indicators of exposure to a chemical. These include inhibition of cholinesterase as an indicator of exposure to organophosphates and prolonged coagulation times due to coumarins. They are usually much less speciﬁc than the direct methods; for instance, cholinesterase inhibition is produced by all organophosphates and carbamates and, as a result, is an indicator only of exposure to a chemical with this activity, not to a speciﬁc agent. This lack of speciﬁcity increases as the remoteness of the measurement from the original chemical increases. Normally, however, there is a history of exposure to a particular chemical, and it is relatively easy to make the connection between effect and cause. The extent to which the marker is changed from baseline data or from normal gives a broad indication of the extent of exposure. However, it cannot be used to calculate the dose or plasma concentration of the chemical responsible (if it has been identiﬁed), because the severity of response is so much inﬂuenced by the individual in terms of genetics and circumstances under which exposure took place. Another factor, working against calculation of dose for unattributed exposures, is the differing potencies seen between members of chemical classes. Reactive compounds or their metabolites interact with DNA or proteins, giving another method of assessing exposure. The total adduct concentration may be measured, which gives an indication of total exposure to reactive chemicals without assigning responsibility to any individual agent. However, where a speciﬁc adduct—a nucleotide complexed with an identiﬁed additional chemical group—can be demonstrated, this is a clear indication of exposure to the parent compound. A further group, biomarkers of susceptibility, indicate differing susceptibility to effect, as shown by genetic polymorphisms. A concentration of chemical that is relatively risk free for the majority of the target population may carry an unacceptable degree of risk for susceptible individuals. This is exempliﬁed by allergic responses to very low concentrations, which leave the majority of people unaffected. They do not indicate exposure but are a signiﬁcant factor in determining individual risk.

PROCESS AND FACTORS IN RISK ASSESSMENT Risk is inﬂuenced by innumerable factors that act together or against each other in the process of delivering toxic chemicals or metabolites to their site of action. Although it is possible to list these factors, it is probably unwise to do so as this may be unduly restrictive. Risk assessment and risk evaluation should not be seen as box-checking exercises and all the circumstances surrounding the expected use of the chemical must be considered as these may well be unique to the proposed use in the intended location. Some of the factors relevant to risk assessment are reviewed in Box 2; these points are expanded in the text that follows.

A Guide to Practical Toxicology 2nd Edition

350

Box 2 Factors to be Considered in Risk Assessment The following is not in any particular order of importance and should not be seen as complete, as other factors may be relevant to particular chemicals or circumstances of use. r Physical form: The risks associated with dusty powders, liquids, or granu-

r r r r r r r r

r r

lated products are different as the likelihood and type of exposure is different with each. A low-density, easily blown powder offers signiﬁcantly greater risk than a solid or a viscous, aerosol-free liquid. Formulation: In general, diluted formulations pose less risk than concentrated forms; formulation also can have profound effects on absorption and bioavailability. Expected exposure, in terms of route, dose, and duration. General consideration of safety evaluation data for the shape of any dose– response curves and if there are thresholds for toxicity. Any human data that exist as a result of controlled experiment or accidental exposure; data from similar compounds may also be useful. Type of toxicity or hazard expected. Target organ and mechanism for toxicity, reversibility of any effects. Species differences in ADME, pharmacological potency, and likely impact of any such difference in humans; human or animal polymorphisms in metabolism. Safety margins: The relationship between NOEL, NOAEL or lowest observed adverse effect level (LOAEL), and expected levels of exposure in humans. A wider safety margin will be desirable for toxicities such as allergy or carcinogenicity than for other effects such as transient, reversible change. Target population for whom the risk assessment is being prepared, in terms of sex, age, disease status, etc. Purpose of the proposed risk assessment.

Physical Form and Formulation The physical form of a chemical is signiﬁcant in determining risk associated with it. A chemical poses the same hazard in whatever form it is present but different forms carry different risks, as with lead in car fuel, paint, or in drinking water. As stated earlier, if the toxic moiety cannot get to its site of action, it cannot cause toxicity at that site. Dermal exposure to a chemical that is not absorbed through the skin will not cause systemic toxicity, although there may be local effects such as irritation. A low probability of exposure is usually associated with a low level of risk. For example, in production facilities, a granulated, dust-free product poses less risk than the same chemical as a low-density, easily dispersible powder. A liquid form

Risk Assessment in Practice and Setting Exposure Limits

351

may be less risky to handle, providing aerosols are not generated. Particle or droplet size affects availability through inhalation, micron-sized particles being respirable, while larger ones are trapped in the upper respiratory tract. Physical form is also a consideration in dealing with accidental spillage: a free-ﬂowing volatile chemical goes further when spilled and is more hazardous to clean up than a nondispersible solid. Formulation of a chemical with a carrier or excipient also changes risk levels, as this can have signiﬁcant effects on bioavailability. A solution in a solvent that enhances transdermal absorption is inherently more hazardous than a mixture of the same chemical with a solid excipient such as lactose. A solution combined with a process that allows formation of aerosols is potentially as hazardous as working with a dust. Dilution has the potential to reduce concentrations at the target site and so has beneﬁts in reducing risk. The expected form, and consequent bioavailability, of the product to which people will be exposed has to be compared with the formulations used in the safety evaluation studies because these are frequently different. A judgment has to be made as to how the form or formulation of the chemical compares with that in the safety data and whether it will be associated with greater systemic exposure levels than those seen in toxicokinetic data. Route of Exposure The most likely routes of exposure must be considered together with the likely dose levels achieved. Also, the extent of control over the exposure is a signiﬁcant factor; thus, while it is difﬁcult to control exposure to chemicals present in the environment, much greater control is possible with prescribed drugs (in theory) and in the workplace. This can highlight two populations of exposed people for whom the risks are different. For an orally active drug, patients receive a tablet or capsule of known size at a predetermined frequency; exposure by other routes is expected to be minimal. Workers producing the same chemical, who do not have the disease target for the drug, can expect to be exposed to it dermally and by inhalation. Following inhalation, a degree of gastrointestinal tract exposure can be expected via the mucociliary escalator in the bronchi and, as humans are mouth breathers under exercise, by direct swallowing of deposits left in the mouth. The doses achieved clinically and in the workplace are also likely to be different, as is the duration of exposure. It is possible to have much higher local concentrations of undiluted chemical in a production facility than those encountered in other situations. Bioavailability When the likely routes of exposure have been assessed, the bioavailability by the most signiﬁcant route should be considered. Although risk assessment is often based on dose levels used in the safety data, where possible, the plasma concentrations and systemic exposure should also be considered. Bioavailability

352

A Guide to Practical Toxicology 2nd Edition

is usually considered in connection with systemic exposure but availability for local effects is also important, given that the skin forms a reasonably effective barrier to many chemicals. It should be remembered that the concentration on the skin is likely to be higher than anywhere else and that local concentration on the skin is usually more important than dose expressed in milligrams per kilogram of bodyweight. This principle has relevance wherever the compound comes into contact with the body at high concentrations, including the respiratory tract and eyes, where locally high concentrations can be associated with signiﬁcant irritation. Dose Response The relationship, deﬁned by the dose–response curve, between the anticipated exposure levels and the dose levels at which effects were present or absent is absolutely critical to the risk assessment process. The difference between toxic concentrations and the expected dose in the target population gives the safety margin; the steepness of the dose–response curve gives an indication of how quickly the spectrum of effect is likely to change for small increases in dose level. Risk assessment is simpliﬁed where there is a large margin of safety between effect and target population exposure levels. This is seen in situations where limited toxicity is seen at very high exposure levels but exposure in the target population is, for example, a factor of 1000 or more lower. Simplistically, large margins of safety are associated with lower risk. The presence of a concentration or dose above which toxicity becomes evident should not necessarily be taken to mean that the hazard is not relevant, as individual circumstances can act synergistically with the chemical to reduce the threshold. While it may be statistically sensible to take in the 95% of the population who can be expected to fall within two standard deviations of the mean, this does not mean that the other 5% can be ignored. For drugs, low-dose effects may result from the compound’s intended activity, but these are still likely to be undesirable when expressed in a healthy group of production workers or in the population at large. Where toxicity is expressed only after a threshold level of systemic exposure has been exceeded, this is a clear indication that the effect will probably be absent at the (theoretically) lower levels expected in the target group. This is reinforced if the exposure levels above which the effect is seen are similar in all the test systems in which it is present. Safety Evaluation and Human Data Having considered the data that relate to the physicochemical characteristics and form of the chemical and the effect that these and any excipients and concentration factors have on the likely risk, it is time to consider data relating to safety evaluation and human exposure (if any). First consideration should be of any dose–response

Risk Assessment in Practice and Setting Exposure Limits

353

curve (see earlier) that has been generated for the effect under consideration and, particularly, if there is a threshold for toxicity below which effects have been shown to be absent. Although species speciﬁcity of response has been cited as a major reason for saying that a hazard is not relevant to humans, a cynical view is that this means simply that the risk of the effect being seen (or detected) in humans is very small. Although the normal approach is to look for differences between species, in some ways a simpler option is to look for uniformity of response. While differences in response can be useful in assessing risks, there is an onus to deﬁne these differences mechanistically and this is not always immediately practicable. Lack of deﬁnition of mechanism can lead to uncertainty and this must be taken into account in the risk assessment. However, if every test species shows the same effect, it is very likely that humans will show a similar response and this gives a degree of certainty—although this is unlikely to be welcomed. Expression of the same effect in different species does not mean necessarily that it will be present at the same dose levels or concentrations of exposure. Absorption, distribution, metabolism, and elimination will probably be different across the species and possibly between individuals—especially in a genetically diverse population. Much toxicity is due to metabolism by the family of cytochrome P450 enzymes, which show a substantial degree of diversity between species. While a P450 that produces a toxic metabolite in rats may be absent or nearly absent in humans, this does not necessarily mean that the metabolite cannot be produced in humans as the activity needed for the reaction can be expressed by other P450s. Such activity is usually lower than that in the affected species or target tissue. Where toxicity is expressed through interaction with a receptor, the interspecies differences in afﬁnity for the target need to be taken into account. These differences affect the time of onset of the effect and the speed with which it can be reversed. High-afﬁnity binding can lead to a prolonged effect whereas transient binding to a low proportion of the receptor population is usually associated with transient effect, especially if it is combined with rapid clearance from the target tissue. In addition to the factors considered earlier, the safety evaluation studies should also deﬁne the hazard in terms of extent, mechanism, and reversibility, as well as the factors covered above such as ADME and any differences between species or individuals. One of the most important data points to come from these studies is the level at which no effect has been detected, the NOEL. If treatment-related effects were seen at every dose level, it might be possible to assign one as a level at which no adverse effects were seen (NOAEL). For this purpose, an effect that is not adverse is generally one that is reversible, slight in extent, does not affect the well-being of the organism, and is not associated with any permanent consequences. Such slight effects include transient increases in plasma enzymes, reversible increase in liver size due to hepatocyte hypertrophy, or

354

A Guide to Practical Toxicology 2nd Edition

transient pharmacological action. Failing this, the LOAEL may be used but this is not usual. Each case needs to be considered individually, as an overprecise deﬁnition of what constitutes “adverse” may not be helpful. If the hazard for which the risk assessment is being conducted is always adverse, the NOAEL will not be acceptable and a NOEL becomes essential. Although the acceptability of the risk and the speciﬁc hazard under consideration do not affect the numeric process of risk assessment, it is relevant in setting safety margins and acceptable exposure limits. This is inﬂuenced by the target organ for toxicity, the extent and type of effect, and its reversibility. The last point is a critical aspect of the safety evaluation and has signiﬁcant impact on the acceptability or otherwise of the risks. Some effects, such as birth defects, cancer, or lesions in the central nervous system, are not reversible and demand a wider margin of safety than those which do not have any long-term consequences. Some effects, such as allergy, demand wide safety margins, as the reaction to even very low concentrations can be life-threatening. Allergy is a particularly difﬁcult hazard to deal with because, once established, the concentrations required to provoke a reaction are much lower than those needed for induction. Another factor here is that it is not necessarily easy to predict and can take a long time to develop, as shown by countless animal workers who have become sensitized to animals after years of problem-free work. Any human data, which may have resulted from clinical exposure, accidental spillage, overdose, or even experience gained through working with the chemical, are also an important aspect of any risk assessment. For uncontrolled exposure, these data have to be assessed carefully for any estimate of dose achieved and this is not always possible. On top of this, the circumstances and adequacy or extent of the data associated with each report have to be considered, as not every exposure is reported with future risk assessments in mind. Where several epidemiological studies are available, care must be taken that the protocols and diagnostic criteria used were consistent (if the data are to be pooled) and that other epidemiological pitfalls have been avoided. Another source that should not be ignored is information from any similar compounds, either of the same chemical class and toxicological proﬁle or having the same pharmacological action. It should be borne in mind that pesticides can have pharmacological effects (not always welcome) and that this term does not simply relate to drugs. In looking at such data, the relative potencies of the chemicals should be taken into account, together with any other toxicities expressed, as similarity of toxicological proﬁle can be used to back up conclusions from the risk assessment of the hazard under consideration. Purpose and Target Population Finally, the purpose of the risk evaluation, and the population at which it is aimed, should not be forgotten. The composition of the population that is liable to exposure

Risk Assessment in Practice and Setting Exposure Limits

355

is relevant, as risk factors differ according to age, sex, disease status, occupation, and expected circumstances of exposure. Some risks are not relevant to some populations; teratogenicity is not usually a risk factor for all-male working groups, although it may be indicative of other reproductive hazard relevant to males. Dermal exposure and irritation may be a problem in production workers but should not be signiﬁcant in patients taking a capsule by mouth. Inequality of risk between populations is demonstrated by consideration of diethylhexylphthalate (DEHP). Exposure to DEHP was signiﬁcantly higher in U.S. patients receiving dialysis (50,000 patients receiving 4500 mg/yr intravenously) than in the general adult U.S. population (220 million) who were each exposed to 1.1 mg/yr through dietary contamination. Patients who received irregular blood transfusions, haemophiliacs and young children who were exposed orally, form further subgroups which were exposed to DEHP to different extents (5). The composition of the target population for whom the risk evaluation is being generated will deﬁne the responses that may be expected. The reaction to any chemical is likely to be different between healthy production workers, a group of patients, or the general population (and between the general populations in countries with long life expectancies and those with short life expectancies). Although it may seem sensible to say that use of carcinogenic pesticides is not of signiﬁcance in the face of short life expectancies generally and a famine and that teratogenic effects are not of signiﬁcance if there are no women in the target population, this approach should be used with caution. Pharmaceuticals offer a number of examples of the way risk evaluation works and illustrate the dynamics of the whole process, showing that an evaluation for one group is unlikely to suit another. The ﬁrst contrast can be drawn between patients and production workers; the former have a disease and would be expected to beneﬁt from exposure. Furthermore, this exposure is more controlled than for the production workers who do not have the disease and for whom the pharmacological effects may be unwelcome if not actually adverse. Another group, which can be expected to be exposed to a new pharmaceutical, are the healthy volunteers who, for non-life-threatening diseases, are the ﬁrst humans to be purposely exposed to the drug. The assessment of risk for this group has to be very conservative because of the signiﬁcant step that is being taken—from the laboratory animals of the safety evaluation to a ﬁrst dose in humans. For this reason, ﬁrst doses in humans are usually conservatively low, with a large margin of safety from the NOEL identiﬁed in the most sensitive species. However, for drugs intended for life-threatening conditions such as cancer, it is normal to start human studies in patients rather than volunteers, especially if the drug is toxic, which is frequently the case for cancer therapies. For these patients, the risk/beneﬁt ratio is clearly different from other drugs and, as a result, the starting dose is often close to those associated with toxicity in the safety studies. The risk evaluation is complicated in these patients by the general expectation that they are likely to be seriously ill and taking co-medications that are likely to affect responses to the test drug. As the clinical evaluation continues, the risk evaluation of the drug must be continuously

356

A Guide to Practical Toxicology 2nd Edition

revised as the human data accumulate. Thus, a risk evaluation conducted in the ﬁnal stages of clinical trials is likely to be very different to that carried out for the human volunteers in the ﬁrst trial.

SETTING SAFETY FACTORS AND MARGINS Safety factors are set with the intention that the hazard being assessed will not— with reasonable conﬁdence—be seen (at unacceptable levels in some cases) in the target population. The use of safety factors in risk management has been routine for many years to establish a margin of safety between the doses used in safety evaluation tests (normally in animals) and the levels to which humans will be exposed. Therefore, agreement on safety factors is a basic requirement before exposure limits can be set. The traditional (i.e., questionable) approach has been to use a factor of 100, being a factor of 10 lower to take into account possible differences between species and a further factor of 10 lower to take into account variation among the human population. Although this is a simple approach requiring limited numeracy to put into effect, it was based on the fact that there was little knowledge to justify any other method. In reality, therefore, the two factors of 10 are uncertainty factors that have to allow for differences in toxicokinetics and toxicodynamics within the test species and between human individuals. In either case, the traditional approach may not give a large enough safety factor or, equally, may give one that is larger than is warranted by the actual data. With greater understanding of mechanisms of toxicity, differences in ADME and toxicodynamics, a more reﬁned approach is becoming possible. Box 3 summarizes the factors that need to be taken into account when deciding safety factors in respect of a particular hazard and target population. Hazard Weighting and Safety Factors The type of toxicity expressed—the hazard—affects the weighting of the subsequent decisions on how the risks are managed. Reproductive effects and frank carcinogenicity are seen as more undesirable than transient effects and so carry more weight in any subsequent risk assessment—and demand larger safety factors in deciding permissible exposure limits. With increasing dose and toxicity, it is normal for the number of changes to increase also, producing a range of effect from low- to high-dose level. The various dose levels associated with change in degree of effect–from NOEL to NOAEL to LOAEL–may be relevant for different populations and, as a result, any targeted risk assessments should take this into account. The result may be to set exposure limits that differ for particular groups and exposure situations, for example, production facility workers and consumers.

Risk Assessment in Practice and Setting Exposure Limits

357

Box 3 Choosing Safety Factors A safety factor is a desired margin of safety over doses which have shown to be without effect or to show change that is not adverse. When deciding this margin, factors considered should include the following, although each case is different and other factors may well be relevant. r Database available; increasing study length and statistical power (sample

r

r

r

r r r r

numbers or individuals) and quality increase conﬁdence in the data; smallscale, short studies are a poor basis for extrapolation and so an extra factor should be added. Type of effect under consideration—knowledge of mechanism, duration, and reversibility. An additional safety factor may be added, but apply this to the toxicity of concern, not to another lesser effect seen at a lower dose level or in another species (7). Type and use of chemical: The class of compound and its mode of action— toxic or pharmacological—should inﬂuence the size of safety factor chosen. Replacement therapies such as hormones or potent pharmacological disruptors of normal physiology (e.g., bisphosphonates), which could have signiﬁcant adverse effects in a healthy population, need particular care. Precedent with chemicals of similar structure, class, or mechanism of action. This information, taken with data on relative toxicity in terms of NOEL or NOAEL and knowledge of their effects, should allow more precise choice of desired safety margin. Acceptability and perception by the target population of the risk being assessed. The traditional method—10 for species plus 10 for individual variation and a further multiplier to take into account the factors above; e.g., reproductive effects in safety studies might add a further factor of 5. Additional factors may be added for different absorption between test route and exposure route and between different ADME and any other clear differences. The approach, ﬁrst suggested by AG Renwick (8), splits the two factors of 10. The ﬁrst (for interspecies variations) is split into 4.0 for toxicokinetic and 2.5 for toxicodynamic differences; the second 10 (for extrapolation to humans) may be split in the same way or as two factors of 3.2 (see text). This approach is intended to remove some of the uncertainty in the use of the traditional factors but is dependent on detailed knowledge of the kinetics and toxicodynamics of the material.

The use of safety factors in respect of chemicals naturally present in food is probably inappropriate.

358

A Guide to Practical Toxicology 2nd Edition

Safety Factor Rationale Looking at the traditional approach of two multiples of 10, the ﬁrst is intended to account for potential (probable) differences in response between species. In setting exposure limits, it is normal to use safety evaluation data from the most sensitive species, which may be a nonrodent. Due to the greater variability between individuals of nonrodent species and the smaller data sets in comparison with rodents, a factor of 10 to allow for extrapolation between species may not be enough. If there is not much difference in response or sensitivity between the species that have been investigated, a lower factor than 10 may be reasonable. For the second factor of 10, to account for variability within the human population, there may be huge potential differences in response, a situation that is seen with allergens. It is possible to be exposed over a number of years to an allergen without any evidence of adverse reaction, a situation that is seen repeatedly with animal allergy. The problem for this type of hazard is that the majority of the population will be able to tolerate quite high concentrations whereas a relatively few sensitive individuals—to whom it may be difﬁcult or impossible to exclude from the target population—could be sensitive to concentrations 100-fold lower. In this case, the only approach is to select a safety factor that should protect everyone, even though this may place costly restraints on the production or containment processes. To remove some of the uncertainty from the use of the traditional 100-fold safety margin, AG Renwick has argued (see Box 3) that the two 10 factors should be split to take account of differences in toxicokinetics and toxicodynamics in the test species and differences in pharmacokinetics and pharmacodynamics in the human population. This method clearly depends on fairly detailed knowledge of the behavior and fate of the chemical not only in animals but also in humans and on the correct choice of starting dose (see later). Whatever approach is used, a safety factor must not be derived from an exposure limit chosen simply because it can be achieved. It is not acceptable to say that exposure limits cannot be reduced because (e.g.) the equipment in use is not capable of greater containment levels or the personal protection equipment is inadequate or wrongly used. The safety factor should be decided ﬁrst, based on the best data available, and the exposure limit is then derived from the safety evaluation data, as described later.

EXPOSURE LIMITS One of the ﬁrst hurdles to overcome in this discussion is the plethora of abbreviations that are used for the various types of exposure limit. These can become confusing when all are discussed together; Table 2 provides deﬁnitions of the more usual limits. These are broadly divisible into those that are relevant in the workplace (WELs, OELs, and occupational exposure bands) and those that are relevant to the human population in general, although there is some overlap (ADIs and TTC). The WEL is a U.K. term that has similarities to the OEL, a

Risk Assessment in Practice and Setting Exposure Limits

359

Table 2 Deﬁnitions of Exposure Limits WEL/OEL

PEL

Workplace exposure limit/occupational exposure limit Permissible exposure limit or permissible dose

OEB

Occupational exposure band

TLV

Threshold limit value

TLV-C STEL

Threshold limit value–ceiling Short-term exposure limit

TWA

Time-weighted average

MRL

Maximum residue limit

ADI

Acceptable daily intake

TDI

Tolerable daily intake

TTC

Threshold of toxicological concern

Average airborne concentrations of a chemical to which workers may be exposed over a deﬁned period (see text). The dose that has no adverse effect on a worker. Mostly U.S. term for limits for industrial chemicals that are enforceable by a central authority such as the Occupational Safety and Health Administration. An absolute upper limit of exposure based on categories to which compounds with few data are assigned based on hazard The upper permissible airborne concentration An airborne concentration that should not be exceeded at any time The upper airborne concentration that is acceptable for short-term exposure (e.g., not longer than 15 min experienced no more than 4 times in a day at intervals of not less than 1 hr) without prolonged or unacceptable adverse effect. The average concentration to which nearly all workers may be exposed repeatedly without adverse effect, during a working day of 8 hrs or a 40-hr wk. The maximum acceptable concentration in foods for pesticides or veterinary drugs The daily intake of a chemical that is expected to be without adverse effect when ingested over a lifetime Used in similar contexts to ADI, for residues and food contaminants A threshold for human exposure for all chemicals below which there would be no signiﬁcant risk to health (16)

Source: From Lewis’ Dictionary of Toxicology and other reference texts cited in the bibliography and from Ref. 22.

term used in the United States. The WEL/OEL comes in two forms—either the exposure level at which no adverse effect would be expected to occur, based on the known and/or predicted effects of the substance, and is reasonably practicable or, if this is not possible, the exposure level that is achievable with good control, taking into account the nature and severity of effect and the costs/beneﬁts of the control solutions.

360

A Guide to Practical Toxicology 2nd Edition

Those that cover the workplace generally assume intermittent exposure, usually for no longer than a typical working day of 8 hours in a 40-hour week and can set average exposure limits (TWAs) or maximum concentrations which are tolerable transiently within the working day, usually for no longer than 15 minutes (TLVC, STEL). The occupational exposure band, as distinct from the OEL, places compounds into four or ﬁve bands of acceptable concentrations based on their known or expected toxicity. They are used when there is little information about the chemical, particularly for human effects. A further concept increasingly used in risk assessment is the TTC, which is used in assessment of chemicals in food and, increasingly, in areas such as genotoxic impurities in pharmaceutical drug substances. Exposure limits that are applied to the general population cover chemicals such as food additives or pesticides (ADI), although a similar limit, the TDI, is used for residues of veterinary drugs and food contaminants (which may be pesticides but may also be other unintended contaminants such as aﬂatoxins). The TTC is increasingly used to establish a threshold for chemicals in food and other substances such as pharmaceuticals; these are discussed in more detail at the end of this chapter. The MRL is an offshoot of the ADI/TDI and refers to the upper limits of residual drug or pesticide that is allowable in food that reaches the supermarket; in turn, this limit inﬂuences the interval that is allowed between application or treatment and harvest. These various limits refer to the chemical of concern or, in some cases, to metabolites or other degradation products. A further measurement is becoming more common, the biological TLV, in which a biological marker (such as cholinesterase inhibition) is used to deﬁne the limit of effect beyond which exposure should cease or be reduced. Many chemicals are already ofﬁcially regulated and have set OELs/WELs, under European regulations such as Control of Substances Hazardous to Health (COSHH) or the US Occupational Safety and Health Administration (OSHA) and the American Conference of Governmental Industrial Hygienists (ACGIH). If the chemical of concern is not novel, the regulations from these or similar bodies should be checked before setting your own limits that may fall outside (higher than) ofﬁcial ones. Standard texts such as Casarett and Doull have listings of such exposure limits (see Bibliography).

DOSE LEVEL SELECTION FOR STARTING RISK ASSESSMENT NOEL and NOAEL Dose selection for exposure limit setting is usually carried out by assessing the data from a single species and often one study. If the effect is seen in more than one species, the most sensitive species is taken for dose selection, using the longest toxicity study performed (or based on 90-day study values for E.U. risk assessement of repeated dose toxicity). The ﬁrst step is to ask at which dose level the effect of interest becomes apparent or likely in the test species used in the study

Risk Assessment in Practice and Setting Exposure Limits

361

being assessed. Traditionally, there have been two values to look for, namely the NOEL and the NOAEL. These are both doses that have been used experimentally and are, inevitably, subject to the imprecision of such an approach. Ideally, in a typical study of three treatment groups in which progressive liver toxicity is seen with increasing dose, there should be no effect at the low-dose (the NOEL), clear toxicity at the highest dose, and minimal change at the mid-dose levels. If the effects at the mid dose are clearly minimal (essentially functional) and reversible, it may be designated as a NOAEL. In this instance, use of the NOAEL is sensible because it is a dose that you know to be associated with some effect. In cases where effects at the mid dose are too severe to allow its use, it may be necessary to use the NOEL in the calculation. There are problems with both these approaches. If the NOEL is used, it may be much lower than the next dose up. Although scientiﬁcally supportable, dose choice in toxicity studies is often also apparently consistent with numerical convenience or the borders designated for classiﬁcation criteria, ﬁgures such as 3, 10, and 30 mg/kg/day or a similar variation being common. For relatively nontoxic chemicals, however, the intervals between doses can be very much larger. The result is that if there is an effect at the mid dose that renders it unsuitable for this use, the low dose may be so much lower as to give little conﬁdence in estimation of the dose at which minimal effects would become apparent. Thus the NOEL may give a lower dose for calculation of exposure limits than is actually justiﬁed by the true toxicity of the chemical. Exposure limits on this basis may be more conservative than is desirable, leading to containment or cleanup measures that impose higher than necessary costs on those responsible for managing the risk. The use of the NOAEL is also ﬂawed in other ways. The NOAEL is dependent on the ability (statistical power) of the chosen study to detect differences between a control and a test group; the use of larger group sizes is likely to result in lower NOAELs. It does not take sample size (numbers per group) into account or variability around the mean that may be due to inhomogeneity in the sample population. Larger group size will tend to be associated with lower NOAELs. Also, because animals tend to tolerate higher doses over short studies than over longer treatment periods, the NOAELs in subchronic studies are likely to be higher than those in chronic studies. This is particularly true for toxicities that accumulate with continued treatment; nephrotoxicity may not be seen in 4-week studies, may be only minimal after 13 weeks but life-threatening after 26 weeks—even if dose levels for the successive studies are reduced according to the data from the previous study. In addition, the NOAEL takes no account of the shape of the dose–response curve and does not take into account the degree of toxicity at higher doses or the variability in the data. Similar arguments may be leveled at the NOEL (5,9–12). In these cases, the benchmark-dose approach may be better, as this calculates a starting dose (effectively a derived NOAEL) from all the available data. This useful concept is gaining ground in the United States and is being introduced into Europe.

A Guide to Practical Toxicology 2nd Edition

362

Response

BMR

LOAEL NOAEL

BMDL BMD

Dose

Figure 2 Comparison of NOAEL/LOAEL and BMD approaches (see text for discussion). Source: From Ref. 13.

The Benchmark Dose In some studies where there is a progressive dose–response curve for an adverse effect, there may be no NOEL. In this case, it may be necessary to use the LOAEL or the benchmark dose (BMD). The LOAEL is the lowest dose at which adverse effects were seen and does not refer to a dose at which a deﬁned percent response is seen—either in terms of numbers of animals affected or in extent of response relative to controls. The BMD, which has been extensively reviewed by Filipsson et al. (13), is a calculated value that seeks to deﬁne a dose at which a low response is seen, for example, 10%; this may be estimated by extrapolation or calculation from the upper conﬁdence limits of the dose–response curve. It has been seen as a point of departure for the onset of toxicity and replaces the NOEL or LOEL/LOAEL. The drawback of the BMD concept is the need to deﬁne a response rate and the statistical weakness of shorter toxicity studies for this purpose. As a result, this is probably best suited to relatively large data sets such as those that result from chronic toxicity, reproductive toxicity, or carcinogenicity studies in rodents. If using smaller data sets, as found in shorter rodent studies and those using nonrodents, the uncertainties of this become more signiﬁcant. The BMD approach used for threshold versus nonthreshold effects is also slightly different, the method in the latter being to draw a line from the BMD to the origin of the curve; this is used for genotoxic carcinogens. With the BMD dose, it is also necessary to assume an acceptable risk level. It is important to bear in mind that the BMD still requires expert judgment in choosing the end point, pivotal studies, and levels of response. The principle of the BMD is illustrated in Figure 2. The dose of interest is the lower conﬁdence limit on the BMD, the BMDL, or Benchmark Dose Low; this is a more conservative approach than using the BMD value itself and serves to account for any uncertainty and variability in the data. Figure 1 illustrates a dose–response

Risk Assessment in Practice and Setting Exposure Limits

363

Box 4 Setting Exposure Limits The ﬁrst step is the choice of dose level with which to start the process (14,15). Taking the toxicity or effect of concern, as seen in the longest toxicity study available in the most sensitive species, assess the data to decide which type of dose level is most appropriate, usually selected from the following: r NOEL, NOAEL, or LOAEL—These do not take account of the shape of the dose–response curve or the risks and effects present at higher dose levels. r The BMD is the dose at which there is a low response (e.g., 10%), observed or estimated from the upper conﬁdence limits of the dose–response curve. It is probably best suited to larger data sets and requires some estimate of what constitutes an acceptable risk to provide a safety factor. r For known pharmaceuticals, the minimum therapeutic dose may be taken and a safety factor applied to produce an exposure level that can be expected to be without adverse effect or undesired pharmacological consequences. Then, taking the chosen dose, apply the safety factors selected in Box 3 and put into the basic formulae (10) as follows: Occupational exposure limit = NOAEL(mg/kg/day) × 70 kg (human bodyweight) a × b × c × breathing rate Acceptable daily intake = NOAEL(mg/kg/day) × 70 kg (human bodyweight) a×b×c Where NOAEL represents the dose chosen from the safety data, 70 kg is a standard human (50 kg gives a more conservative ﬁgure and may be more appropriate for females) and a, b, and c are safety factors (a for extrapolation from the test species to humans, b for human variability, c for other considerations such as nature of toxicity, etc.). The breathing rate is usually assumed to be 10 m3 /8-hour working day for a medium workrate. The OEL here is for airborne particulates and the ADI would be suitable for foods or drinking water. Occupational exposure bands are set for chemicals without ofﬁcial or in-house OELs and for which there are not much data [(11,12); see text]. Some basic rules of thumb may be added to this: r Although it may be politically correct to choose a dose level at which there is absolutely no effect, this may not be relevant to the toxicity of concern if the NOEL/NOAEL for that is higher. r All activities of the compound should be considered, not simply the toxicities. An undesired effect other than toxicity may indicate a lower ADI. r Over conservative selection of exposure limits can lead to unnecessary expenditure in cleanup or containment. Setting them too high may mean unacceptable adverse effects.

364

A Guide to Practical Toxicology 2nd Edition

relationship onto which the LOAEL and NOAEL derived from a study have been plotted. The lowest ﬁgure plotted is the ADI and the gap between the NOAEL and the ADI is a function of the safety factor used. The BMD Response (BMR a term used by Filipsson et al. in an attempt to end terminological confusion in this respect) is a predetermined increase in response (e.g., 10%). The point on the dose–response curve indicated by the BMR corresponds to the BMD and the lower conﬁdence limit of the BMD (indicated by the double-headed arrow) is the BMDL. SETTING EXPOSURE LIMITS There are two basic steps in setting an exposure limit; ﬁrst to take the chosen safety factor relevant to the lead effect that you are guarding against and then apply it to the dose level that you have selected as the basis for your calculations (Box 4). Both these steps imply choice and both therefore require a degree of expert judgment. Choice of safety factor has been reviewed earlier and I have assumed that this far into the process the effect of concern has also been chosen. However, as indicated by AG Renwick (7), there is little scientiﬁc sense in choosing a safety factor for microscopically evident liver toxicity if it is then applied to a lesser effect such as functional, transient increase in urine volume without pathological correlate. Occupational exposure bands may be set for chemicals for which there is no ofﬁcial set limit or in-house OEL (11). These set bands of acceptable airborne concentration; for dusts these are ⬍0.1 mg/m3 , 0.1–1 mg/m3 , and 1–10 mg/m3 . Gases and vapors are assigned to four bands. There is also a lower, unspeciﬁed band for very active substances that cannot be assigned to these bands and for which special arrangements have to be made. Use of the Therapeutic Dose for Setting WELs/OELs for Pharmaceuticals For pharmaceuticals, the minimum therapeutic dose may be used in conjunction with data from clinical trials or adverse reaction reports. However, it is necessary to remember the type of indication the drug is used for, given that toxic treatments are more acceptable for cancer than for non-life-threatening diseases. For nonlife-threatening diseases, the minimum therapeutic dose may be expected to be relatively nontoxic; for cancer treatments, this cannot be assumed. Examples of these various methods are given in Tables 3 and 4. Note that because the doses of thalidomide and ethinyl estradiol are given as the human dose, there is no need to multiply by bodyweight. For chemicals that have a long history of use or production, it is essential to ﬁnd out what the existing knowledge base is to indicate currently experienced dose levels. This may not be easy when production is being set up in competition with a rival company. If there is a reliable estimate of current exposure levels— for industrial chemicals, food contaminants or endogenous dietary compounds – a margin of exposure (MOE) or safety can be calculated as a ratio by dividing the NOEL, NOAEL, or LOEL by the highest dose experienced in the target

Risk Assessment in Practice and Setting Exposure Limits

365

Table 3 Calculating an OEL for Thalidomide Using Different Methods Database

Therapeutic dose

BMD

Toxicity seen as birth defects NOAEL unavailable in animals or humans

Assume effect level is 25 mg/day oral 100 × factor for extrapolation from effect level to NOAEL 10 × for human variability

25 mg/day assumed as BMD Response at BMD assumed to be 50%. Linear extrapolation to origin Acceptable risk assumed 1:10,000 2× to adjust for route difference (oral instead of inhalation) OEL0.25 ␮g/m3

50 mg/day oral: 10–50% affected 25 mg/day oral: % response unknown Breathing 10 m3 in an 8-hr workday

2 × to adjust for route difference (oral instead of inhalation) OEL1.25 ␮g/m3

Source: From a presentation by Ku, Robert H (SafeBridge Consultants Inc) at the American Chemistry Society annual meeting in San Diego 2001 and from Ref. 22.

population. This may indicate that the MOE gives a sufﬁcient safety margin and that no further action is needed; alternatively, it may indicate that additional containment or cleanup measures are needed to reduce exposure. THRESHOLDS OF TOXICOLOGICAL CONCERN The concept behind the threshold of toxicological concern (TTC) is that it should be possible, for all chemicals, to establish a threshold for human exposure below Table 4 OEL Calculations for Ethinyl Estradiol, A Synthetic Estrogen Method

Calculation

NOAEL and safety factors

Human NOAEL is 3.5 ␮g/day divided by (safety factor of 10 multiplied by breathing rate at 10 m3 /8-hr day) = OEL0.035 ␮g/m3 . The factor of 10 is for human variability Lowest therapeutic dose = 20 ␮g/day. Divided by (100× factor multiplied by breathing rate at 10 m3 /8-hr day) gives an OEL of 0.02 ␮g/m3 Endogenous production of 17-beta estradiol in humans is about 70 ␮g/day. Ethinyl estradiol is about 2× more potent than 17-beta estradiol. A 1% increase in activity would be equivalent to a daily exposure to 0.035 ␮/m3 if breathing at 10 m3 /8-hr day

Therapeutic dose and safety factor (100×) 1% increase over endogenous production

Source: From a presentation by Ku, Robert H (SafeBridge Consultants Inc) at the American Chemistry Society annual meeting in San Diego 2001 and from Refs. 10, 22.

366

A Guide to Practical Toxicology 2nd Edition

which there is no appreciable risk to human health (16). This assessment does not necessarily have to be based on experimental data for the compound as data from compounds of similar structure may be used. TTCs have a long history of use by the US Food and Drug Administration (FDA) Joint FAO/WHO Expert Committee on Food Additives (JECFA) and for screening food packaging migrants and ﬂavoring substances, respectively (17), and Europe International Life Sciences Institute (ILSI) has proposed a systematic approach to assessing low levels of chemicals in food, using a decision tree (18). The approach used is to examine potential genotoxic carcinogens ﬁrst, using the presence of known structural alerts as a guide. Potent compounds such as those similar to aﬂatoxin and nitroso compounds are not considered for TTC on the basis that setting a practical limit would not be possible. Compounds with other structural alerts for genotoxicity may be assigned a TTC of 0.15 ␮g/person/day. The TTCs for compounds that do not have structural alerts are assessed using data from the NOAELs from chronic toxicity studies of compounds of similar structures, together with an uncertainty factor of 100. Other properties of the chemical may be taken into account. If a compound’s intake is below the threshold and it is predicted to be metabolized to innocuous metabolites, there should be no safety concern; however, if intake were above the threshold, more data on the compound or structural analogues would be desirable (19). The TTC approach is essentially pragmatic and has a lot of merit based on the potential to use data from similar compounds, while excluding compounds that are known or expected to be potent carcinogens. Although it may be pragmatic, setting TTCs should not be seen as a shortcut for risk assessment. Using this approach to risk assessment still requires careful judgment of data sets and realistic assessment of exposure. Low-level exposure to toxic chemicals cannot be dismissed and accepted without due care. Despite the reliance on judgment, the process still depends on the generation and use of numbers. Numbers are widely used in toxicology to describe threshold values such as ADIs, which translate into maximum permissible concentrations in food and similar exposure limits. As Wennig (20) has pointed out, the rationale for such numbers has to be completely understood and they should be applied only by people with sufﬁcient toxicological knowledge and expertise. They should be used with care as misuse can have serious consequences. The increasing sensitivity of analytical methods and technology means that lower and lower concentrations of chemicals can be detected and this can cause concern; what is the signiﬁcance of the 4000 molecules of dioxin that have been found in the local swimming pool? As with any tool—and the TTC is just a tool—appropriate use has potential beneﬁts and wide application. Although the TTC concept has been used mainly in the ﬁeld of foods and diet up to this point, other applications are becoming apparent. For example, the European Medicines Agency (EMEA) has adopted this approach in assessing genotoxic impurities in pharmaceuticals (21) and suggests

Risk Assessment in Practice and Setting Exposure Limits

367

1. Is the substance a nonessential metal or metal-containing compound, or a polyhalogenated-dibenzodioxin, -dibenzofuran, or –biphenyl?

No

Yes

2. Are there structural alerts that raise concerns for potential genotoxicity?

3. Is the chemical an aflatoxin-like-, azoxy-, or N-nitroso-compound?

Yes

No 5. Does estimated intake exceed TTC of 1.5 μg/day?

No

6. Is the compound an organophosphate?

4. Does estimated intake exceed TTC of 0.15 μg/day?

No

No expected safety concern

Yes

Yes

No

Yes

Negligible risk (low probability of a lifetime cancer risk greater than 6 1 in 10 )

Yes

No

7. Does estimated intake exceed TTC of 18 μg/day?

Risk assessment requires compound-specific data

ii Yes NO

No expected safety concern

No 8. Is the compound in Cramer structural class III?

Yes

9. Does estimated intake exceed 90 μg/day?

NO 10. Is the compound in Cramer structural class II?

Yes Yes

11. Does estimated intake exceed 540 μg/day?

Risk assessment requires compoundspecific data

No No expected safety concern

NO 12. Does estimated intake exceed 1800 μg/day?

Yes

No Yes

Figure 3 Decision tree for low molecular weight compounds for which limited toxicity data are available, which incorporates different TTC related to different structural characteristics. Source: Modiﬁed from Ref. 18.

368

A Guide to Practical Toxicology 2nd Edition

that a TTC of 1.5 ␮g/day, corresponding to a 10−5 lifetime risk of cancer can be justiﬁed where there is a pharmaceutical beneﬁt. SUMMARY The following may be seen as the basic steps in risk assessment and the subsequent setting of exposure levels or acceptable intakes: r The expected exposure of the target population in terms of environmental

r

r

r

r

r

r

concentration and dose must be predicted or measured; predictions should be conﬁrmed by measurement once the target population comes into contact with the chemical. The level of risk posed by a chemical is affected by physical form and formulation, the route(s) of exposure and the bioavailability by that, or the most signiﬁcant route (either in terms of gross absorption or in terms of maximal effect). The dose response shown by the safety evaluation data should be considered together with the effects expressed. Where there are human data available, these should be examined carefully for utility, given the sometimes imprecise reporting of dose and timing of effect relative to the time of exposure. Reliable human data are a luxury. The purpose and target population of the risk assessment may well inﬂuence the ﬁnal outcome of the assessment. The qualitative factors of perception and acceptability of the risk due to the hazards should also be taken into account; successful management of risk is more likely if the target population is kept informed and in agreement. The setting of safety factors and margins is dependent on the weight given to the different effects or hazards, carcinogenicity requiring greater weighting than minor transient effects. Safety factors should be chosen scientiﬁcally wherever possible, although the traditional approach may be necessary where appropriate pharmacokinetic and mechanistic data are absent. Exposure limits are calculated by using the selected safety factors and the dose level from the selected safety study or studies that indicates a NOEL, NOAEL, or LOAEL. Limits should be chosen on the basis of what is necessary rather than what can be achieved. This is taken as the basis of workplace risk management, which is considered in chapter 15.

REFERENCES 1. Klimisch H, Andreae M, Tillmann U, et al. A systematic approach for evaluating the quality of experimental toxicological & ecotoxicological data. Reg Tox Pharmacol. 1997; 25: 1–5.

Risk Assessment in Practice and Setting Exposure Limits

369

2. Campbell DB. Extrapolation from animals to man. The integration of pharmacokinetics and pharmacodynamics. Ann N Y Acad Sci. 1996; 801: 116–135. 3. Mahmood I, Balian JD. The pharmacokinetic principles behind scaling from preclinical results to phase 1 protocols. Clin Pharmacokinet. 1999; 36(1): 1–11. 4. Ritschel WA, Vachharajani NN, Johnson RD, et al. The allometrical approach for interspecies scaling of pharmacokinetic parameters. Comp Biochem Physiol. 1992; 103(2): 249–253. 5. Gad SC. Trends in toxicology modelling for risk assessment. In: Salem H, Olajos EJ, eds.Toxicology in risk assessment. London: Taylor & Francis, 2000. 6. Witschi HR, Last JA. Toxic responses of the respiratory system. In: Curtis D Klassen, ed. Casarett and Doull’s toxicology, 6th edition. New York: McGraw-Hill, 2001. 7. Renwick AG. The use of an additional safety factor or uncertainty factor for nature of toxicity in the estimation of ADI and TDI values. Regul Toxicol Pharmacol. 1995; 22(3): 250–261. 8. Renwick AG. Data derived safety factors for the evaluation of food additives and environmental contaminants. Food Addit Contam. 1993; 10: 275–305. 9. Illing P. Chapter 8 in toxicity and risk—context, principles and practice. London: Taylor & Francis, 2001. 10. Ku RH. An overview of setting occupational exposure limits (OELs) for pharmaceuticals. Chem Health Saf. January/February 2000. 11. Chemical Industries Association. Guidance on allocating occupational exposure bands, regulation 7. London: Chemical Industries Association, 1997. www.cia.org.uk 12. ABPI (Association of the British Pharmaceutical Industry). Guidance on setting inhouse occupational exposure limits for airborne therapeutic substances and their intermediates. London: ABPI, 1995, www.abpi.org.uk 13. Filipsson AF, Sand S, Nilsson J, et al. The benchmark dose method—review of available models, and recommendations for application in health risk assessment. Crit Rev Toxicol. 2003; 33(5): 505–542. 14. Dybing E. Genotoxic carcinogens—is there a threshold? Notes from Eurotox Satellite Symposium, September 2000. 15. Gibbs GW, Amsel J, Soden K. A cohort mortality study of cellulose triacetate-ﬁber workers exposed to methylene chloride. J Occup Environ Med. 1996; 38(7): 693– 697. 16. Barlow S. Threshold of toxicological concern (TTC); a tool for assessing substances of unknown toxicity present at low levels in the diet. ILSI Europe. 2005. 17. Renwick AG. Structure-based thresholds of toxicological concern-guidance for application to substances present at low levels in the diet. Toxicol Appl Pharmacol. Sep. 1, 2005; 207(2 Suppl): 585–91 18. Kroes R, Renwick AG, Cheeseman M, et al. Structure based thresholds of toxicological concern (TTC) guidance for application to substances present at low levels in the diet. Food Chem Toxicol. 2004; 42(1): 65–83. 19. Renwick AG. Toxicology databases and the concept of thresholds of toxicological concern as used by the JECFA for the safety evaluation of ﬂavouring agents. Toxicol Lett. Apr. 1, 2004; 149(1–3): 223–34.

370

A Guide to Practical Toxicology 2nd Edition

20. Wennig R. Threshold values in toxicology—useful or not? Forensic Sci Int. Sep. 11, 2000; 113(1–3): 323–30. 21. EMEA (European Medicines Agency). Guideline on the limits of genotoxic impurities. EMEA/CHMP/QWP/251344/2006. 22. Woolley A. A Guide to practical toxicology, 1st ed. London: Taylor and Francis, 2003.

15 Risk Assessment and Management in the Workplace

INTRODUCTION Exposure to chemicals occurs in all workplaces, whether they are in industry or agriculture (including chemical production plants), ofﬁces, shops, builders, or railway premises. Although the home is not classiﬁed as a workplace, exposure to chemicals occurs there as well, in the form of disinfectants, cleaners, and do-it-yourself materials. The workplace is distinct from other arenas where chemicals may be encountered, in terms of the extent to which control of exposure that is possible within a limited, deﬁned space. However, control can vary substantially from nothing special to purposefully built high containment facilities, and includes substitution, engineering controls, and personal protective equipment as well as management systems. Some very toxic chemicals are required by society in the preparation of end products that are benign (e.g., vinyl chloride monomer in the preparation of PVC). To be effective, control should also include consideration of the knowledge and skills of those exposed. This is exempliﬁed by the differences between industrial, professional, and general public users of biocides and plant protection products. As a rule of thumb, exposure in the production facility is often better controlled, from the producer’s viewpoint, than at the point of use. The conditions of exposure, especially in production facilities, are often very different from those to which an end user is subject. Potentially, in comparison with the end user, the production worker is exposed to high concentrations of the undiluted chemical for long periods in conditions of heat and humidity. This is particularly so for pharmaceuticals where the occupational dose for potent substances may be higher than those needed to achieve the desired therapeutic effect. 371

372

A Guide to Practical Toxicology 2nd Edition

Furthermore, the ultimate user normally uses the chemical diluted by excipients. However, this does not apply in the case of chemicals used as intermediates in the pharmaceutical or agrochemical industries, which are handled undiluted. The following discussion is largely aimed at workplaces in the so-called developed world. The situation in the third world is often very different and the workplaces there may be much less regulated than in, for example, the United States or Europe. Third-world workers may be exposed occupationally to a variety of toxic chemicals, substances, and elements through work such as dismantling electrical goods (for example, computers) and major items such as ships in conditions which would not be tolerated in the developed world. THE HISTORICAL AND REGULATORY BACKGROUND The causative role of occupation in progressive and debilitating diseases has long been recognized although scientiﬁc documentation of the hazards due to particular occupations started comparatively recently. One of the earliest and best known examples was Percival Potts, whose observation in the 18th century of the connection between chimney sweeping and cancer of the scrotum, is seen as a milestone in this process. Occupational disease is a roll call of suffering and—in some cases—corporate irresponsibility based on ignorance and lack of understanding. The illnesses with occupational causes include coal workers pneumoconiosis, asbestosis, silicosis, farmer’s lung, solvent-induced neuropathies, cancers due to agents such as ␤-naphthylamine in dyestuff manufacture and processes such as the Mond process for nickel reﬁning, sensitization, and allergy including asthma. Skin disease (irritant and allergic contact dermatitis), although not lethal, is a particular problem. Although there may some truth in lamenting that the rising tide of sensitization and asthma is partly due to the ruthless pursuit of hygiene in childhood and consequent immune-incompetence, the unpalatable fact is that today’s managers have to cope with this and reduce exposures. They also have to cope with psychologically mediated illness attributed by the patient to chemical exposure at work. One characteristic of some occupational diseases is that they develop over many years and may not become apparent until after exposure has ceased, a situation seen with mesothelioma due to asbestos, which has a particularly long period between exposure and onset of the cancer. In many cases it has required careful epidemiological study as well as experimental work in order to demonstrate that exposure to particular chemicals or processes is responsible for a disease. The corollary of this is that it has often taken a long time for diseases of this type to be associated with their cause, especially where there is an existing normal background incidence. Often it also leads to problems of tidying-up once the illhealth has been identiﬁed. Asbestos delagging for railway coaches in the 1980s, for example, required specially designed enclosed housing, airfed positive pressure suits, and a maximum limitation on hours of work. Since the mid-19th century there has been a vast increase in range of chemicals produced and used by industry.

Risk Assessment and Management in the Workplace

373

The increase in toxicological understanding of the long-term consequences of exposure to these chemicals has awaited epidemiological studies, and therefore lagged behind the initiation of use of a chemical. The predictive use of toxicology for industrial chemicals started in the 1920s and 1930s. Greater appreciation by legislators of the problems of industrial chemicals has led to increasingly stringent regulation in developed countries. In the United Kingdom, although controls existed before 1974 through the Factories Acts and regulations made under them, the Health and Safety at Work Act of that year introduced a new comprehensive approach that covered all aspects of workplace safety including exposure to chemicals. CLASSIFICATION AND EXPOSURE LIMITS One of the cornerstones of chemical risk management is the classiﬁcation of chemicals, which until recently has been a process conducted under slightly different rules in Europe and America. This produced inconsistencies whereby a chemical could be labeled toxic in one country but not in another. This dichotomy is now being rectiﬁed by implementation of the Globally Harmonised System of Classiﬁcation and Labelling of Chemicals (GHS). The GHS classiﬁes chemicals according to types of hazard and proposes common aspects of hazard communication through the use of consistent labels and safety data sheets. One of the objectives is to ensure that information about the hazards and toxicity of chemicals is available to ensure that the safety of humans and the environment are protected as far as possible. As only existing data are used for the classiﬁcation of existing substances, the data set available for workplace assessments can be less than the ideal situation outlined in chapter 13. Frequently the route of administration in safety studies is not the same as that expected in the workplace and an adjustment has to be made for differences in absorption and pharmacokinetics between the routes. Initiatives such as those by the International Council of Chemical Associations and the “Screening Information Data Set” (SIDS) program operated under the auspices of the Organization for Economic Cooperation and Development (OECD) have ﬁlled many data gaps for high-production volume chemicals. REACH is aimed at formally requiring this information from manufacturers and importers into the European Union. Occupational exposure levels have been set by a number of bodies. The Control of Substances Hazardous to Health (COSHH) regulations were introduced in the United Kingdom in 1988. The 2002 re-enactment of these regulations and the regulations concerned with lead and asbestos reﬂected the Europeanization of legislation on workplace safety and health, and was based on E.U. Directives. Limit setting has a much longer history, including the earlier (and continuing) attempts at limit setting by the American Conference of Government Industrial Hygienists and the German Research Society (known by its initials as the DFG). In Europe these functions are now covered both at the E.U. level and by national

374

A Guide to Practical Toxicology 2nd Edition

organizations. In the United Kingdom, the national organization is the Health and Safety Executive (HSE). FACTORS IN WORKPLACE RISK ASSESSMENT Risk assessment in the workplace differs in a number of respects from risk assessment in the wider environment. r The agents to which the workforce is exposed are known and the level of r r

r r

r

exposure can be controlled by containment of processes or by use of personal protection equipment (PPE). The exposure limits can be set centrally by legislation or locally by management but are potentially higher than would be acceptable in other situations. Accidental spillage of undiluted chemical can pose signiﬁcant hazard. The workforce is a selected population, whose long-term or day-to-day composition can be controlled by management; susceptible (or potentially susceptible) individuals can be reassigned or not employed in the ﬁrst place. Women of child-bearing potential or who are pregnant may be excluded from certain production processes, notably those involving lead. The use of nonsensitive people does not necessarily mean that higher exposure levels will be acceptable as susceptibility can develop with time in some cases. The level of risk is affected not only by the substance but by the process it is subject to. A fully contained milling operation may pose very little risk— no exposure, no risk; however, at the end of this process, if the substance is transferred into polythene bags topped up by someone using a shovel, the risk can be signiﬁcantly greater. There is strict control legislation that can result in heavy ﬁnes or closure of the plant if appropriate measures are not put in place.

These various factors, with the managerial responsibility of protecting the workforce (and so avoiding prosecution) mean that there is little margin for error. An over-conservative assessment may mean that it is not possible to work on a particular chemical due to cost of unnecessary containment or cleanup. An assessment that is too generous may have serious consequences for worker health. WORKPLACE RISK ASSESSMENT There is a large amount of support available on the internet offering information and assistance with risk assessment in the workplace. A document produced by the International Programme on Chemical Safety, Assessing Human Health Risks of Chemicals: Derivation of Guidance Values For Health-Based Exposure Limits (Environmental Health Criteria 170) (1) has much useful information that can be used to supplement this and the following discussion. In addition, COSHH Essentials (2), produced by the U.K. HSE, offers guidance and worked examples. COSHH requires that employers assess health risks due to chemicals and decide on

Risk Assessment and Management in the Workplace

375

controls. These controls must then be used; management have to ensure that workers use them and that they are working properly. As corollaries to this, the workers must be informed about risks to health and they must be trained appropriately. The process of risk assessment in the workplace is similar to that in other contexts. The human relevant hazards are predicted from the safety data and information for other compounds is considered as appropriate. These data are then assessed for dose–response and mechanism and the likelihood of human toxicity is predicted. In the workplace the physical properties of the compound— particle size, powder density, aerosol formation, etc.—and the process involved are important. For example, milling a compound to produce micronized powder is associated with signiﬁcant risk as there is greater potential for exposure by inhalation to a respirable form of the chemical, which may also be more easily absorbed by any of the other possible routes of exposure. Although classic, numerical risk assessment may focus on the most serious hazard, in the workplace all the hazards due to a compound should be considered, according to the context of use or exposure. If a compound is carcinogenic at high doses in animals but is also associated with signiﬁcant acute toxicity at lower doses, the risk assessment could be based on both aspects of its toxicity. The acute toxicity may determine the take-off point for setting the workplace exposure limit (WEL) (it would have to be below the level at which acute toxicity was seen); the carcinogenic response means that there would be use of rather greater uncertainty factors in determining the level of the WEL (which would only be a “virtually safe dose”), and the WEL would have to be achievable with good control. There would also be a continuing duty to reduce exposure levels “as low as is reasonably practicable” below the WEL. Each compound assessed poses a different set of problems but, broadly, the most difﬁcult problems from a workplace limit-setting viewpoint are irreversible effects associated with carcinogenicity, reproductive toxicity, and asthma. WORKPLACE EXPOSURE ASSESSMENT There is a whole discipline whose aim in life is workplace exposure assessment and control—occupational hygiene. In addition, most workplaces nowadays have access to health and safety ofﬁcers/advisors that should be able to seek appropriate occupational hygiene advice when they are not capable of doing these assessments themselves. In considering worker exposure to the chemicals being used or produced, a range of factors has to be taken into account including r The physical form of the chemical, whether a ﬁne particle, aerosol, gas, or liquid. r The method of use or handling. Exposure to chemicals in production plants may be different from exposure to workers who use the ﬁnished chemical, for example, pesticides (the exposure of any bystanders is another issue here).

376

A Guide to Practical Toxicology 2nd Edition

r The point at which exposure occurs; e.g., during transfer of ﬁnished chemical from a reaction vessel to a storage container; mixing of a pesticide for application or during use. r The use of any PPE. r Dermal absorption of the chemical. r Frequency of exposure. There are computer models available for these assessments such as the European Union Estimation and Assessment for Substance Model (EASE), which is part of European Union System for the Evaluation of Substances (EUSES), which is available from the European Chemicals Bureau website (http://ecb.jrc.it/). A further factor is the circumstances of exposure in the workplace. Conversion of exposure between routes is often a requirement when dealing with workplace exposure. Standard conversion factors are available, but it should be noted that these factors are usually “worst case” and uptake information will permit modiﬁcation of them. A higher work rate is associated with increased breathing rate and larger inhaled volumes. Thus breathing rates used in calculations have to take into account the nature of the work and breathing rates higher than the standard ﬁgure of 10 m3 for an 8-hour day (which is itself higher than the 22 m3 /day used for 24 hours exposure) may be needed. Because humans are mouth breathers at high work rates, the opportunity for ingestion via the gastro-intestinal tract is also increased, either directly or indirectly by clearance from the bronchi via the mucociliary escalator and swallowing. In addition, these increased work rates will probably be associated with increased temperature, moisture, and peripheral vasodilation, which work together to increase local dermal effects and absorption into the systemic circulation. A side effect of these latter factors is that personal protective equipment is likely to be discarded or not worn correctly. Working in tropical regions can have the same effect, hence the PPE used in Western Europe for plant protection product application may not be practicable in these climates. For pharmaceuticals developed for oral use, there is unlikely to be extensive toxicology by inhalation or dermal routes; in addition, any dermal toxicity studies may not have been conducted with the compound as it appears in the workplace. However, good human data by other routes are likely to be available. While the ﬁnished product will be well characterized in terms of all the data necessary for registration and marketing, any intermediates are often relatively unknown, particularly towards the end of the synthetic pathway, when they are unlikely to be standard off-the-shelf chemicals. In these cases, their similarity or otherwise to the ﬁnal product has to be considered and it will usually be necessary to conduct a small set of safety studies. Of course, if the processes in which the intermediate is formed and consumed are totally enclosed and exposure avoided (even for maintenance workers through the use of PPE), such studies may not be necessary.

Risk Assessment and Management in the Workplace

377

Where a facility has been producing a chemical for years with minimal precautions or reported effects, instituting a formal risk assessment may encounter some difﬁculties, particularly if the safety data indicate an assortment of hazards at exposure levels lower than those actually encountered in the workplace. Although there may have been many years of human exposure, it is quite probable that this has not been quantiﬁed or monitored and that any effects cannot be separated from the background by usual epidemiological methods. In these cases, instituting a system of personal exposure and health monitoring over a period of months may well prove useful in deﬁning effects and the precautions to be taken, as indicated by the safety data. RISK MANAGEMENT IN THE WORKPLACE The endpoint of workplace risk assessment is to ensure that work practices do not result in ill-health. The setting of occupational exposure limits (OELs) or WELs (see chapter 14) is one part of the management of the risks that have been identiﬁed as signiﬁcant for the particular worker population and the processes involved. There is a hierarchy of risk management procedures for workplace health risk management, set out in COSHH. All chemicals used should be handled safely. The ﬁrst preference is substitution of a less safe chemical with a safer chemical. If this is not possible then control will be needed. Control should be undertaken preferably using engineering techniques (containment in totally enclosed systems, use of local exhaust ventilation, and use of good general ventilation). If this is not possible then personal protective equipment (and training in how to use it) is the option. In all cases, to be successful this must be undertaken in a supportive management philosophy and using adequate monitoring and enforcement. The following sections look at risk management in the workplace, starting with compound hazard categories. Compound Categories for Containment Where a chemical falls outside the normal mechanisms of classiﬁcation and labeling, which would otherwise help in deciding what risk management steps were necessary to minimize risk associated with using it, it may be necessary to set up an ad hoc system of classiﬁcation; this is a useful approach to take with pharmaceuticals, pesticides, and their intermediates. This system relies on the creation of a series of categories that can be used to deﬁne the extent of containment for the chemical and any PPE. This simpliﬁes risk management as it provides a set of basic controls that should work in the majority of cases with minimal modiﬁcation. There is, however, the possibility that there will be pressure to keep chemicals in as low category as possible because the higher categories are usually associated with signiﬁcant containment and cleanup costs.

378

A Guide to Practical Toxicology 2nd Edition

The system of categorization in Table 1 is based loosely on schemes from several sources; although there are differences between schemes, these are essentially only of detail and the broad outline is the same. Although four categories are often used, I have suggested an entry level 0 for essentially nontoxic chemicals. This system should be workable without signiﬁcant modiﬁcation, although minor adjustment may be necessary to take account of local circumstances and preferences. The criteria for classiﬁcation given in Table 1 are what I consider to be the most relevant but others could be added, such as NOAEL, half-life, structural alerts, percentage protein binding, tissue-speciﬁc accumulation, the presence or absence of speciﬁc toxicities, or thresholds for speciﬁc pharmacological effect; atmospheric concentration may also be relevant. There may also be some utility in including bands of effect on speciﬁed markers, e.g., cholinesterase inhibition which could indicate differing potencies for groups such as organophosphates. Another practice is to link the categories to the European Union risk phrases that are used to indicate speciﬁc hazards, particularly for transport of chemicals. Although such schemes look very good and undoubtedly have great utility, actually using them is not necessarily straightforward. The central problem is that chemicals do not fall easily into individual categories; they can be category 1 according to one criterion but category 3 for another. The trick is to judge the circumstances and risks of the individual hazards and arrive at a consensus opinion. It may be necessary to categorize one form of a chemical at one level but a more hazardous form at a higher level. In broad terms, the greater the number of classiﬁcation criteria, the greater will be the complexity of applying the scheme to individual chemicals. On balance, where there is uncertainty of relevance or effect, the bias should be towards a higher category rather than a lower one. For chemicals, COSHH Essentials is based on this process. The materials safety data sheet should contain classiﬁcation and labeling information. That information leads to a categorization of the chemical and hence to an indication of what are appropriate management procedures. Obviously, certain categories lead to the evaluation “seek expert advice,” which, if available, may lead to alternative approaches to managing the chemical safely. The Process of Risk Management in the Workplace The intention is to manage the risks associated with the chemical so as to avoid adverse effects in the workforce or in the wider environment. The responsibility for this lies in the ﬁrst instance with facility management; however, there is usually government oversight of the process, which typically becomes active when things go wrong. In the United Kingdom, the facility management is usually assisted by health and safety advisors and may have access to occupational hygienists; the enforcement function is undertaken by the HSE which has

Risk Assessment and Management in the Workplace

379

Table 1 A Basic System of Compound Categorization Category

Criteria for classiﬁcation

0

Very low acute toxicity; lethal dose ⬎2000 mg/kg. Minimal, transient toxicity due to functional change seen at high doses without pathological ﬁndings. No effect on reproductive function. Not mutagenic. No evidence of carcinogenicity by any mechanism. Nonsensitizing, nonirritant. Poorly absorbed through skin or by inhalation. Fast elimination without accumulation into any body compartment. No evidence of human effect. NOEL for relevant effect ⬎100 mg/kg/day in animal studies (equivalent to 5000–7000 mg/person/day). Acute lethal dose: 200–2000 mg/kg. Toxicity in single organ system or species seen only at high doses on repeated dosing, without progression of effect with longer dosing; pathological ﬁndings no greater than slight or minimal; all effects fully reversible within 4 wks without treatment. Dose–response curve shows presence of threshold of effect. No effect on reproductive function. Not mutagenic; no evidence of carcinogenicity in animals. Nonsenzitising, nonirritant. Transient pharmacological effects present at ⬎5 mg/kg that do not affect ability to work machinery. Pharmacokinetics show no accumulation; short half-life. Poor dermal absorption. NOEL shows high margin of safety. NOEL in animal studies 10–100 mg/kg/day. Acute lethal dose 25–200 mg/kg. Reversible, slight toxicity seen at mid to high doses in more than one species or more than one organ system. Not mutagenic. Evidence of carcinogenicity by a clearly nongenotoxic mechanism without human relevance. Minor effects on reproductive function associated with toxicity and not human relevant. Low potential for irritancy or sensitization. Transient pharmacological effects present between 1 and 5 mg/kg. Some potential for dermal absorption. Pharmacokinetics show longer half-life with incomplete elimination within 24 hrs but without signiﬁcant accumulation. NOEL 1–10 mg/kg/day in animals. Acute lethal dose 5–25 mg/kg. Potentially moderate to severe human relevant toxicity, with pathological change that is only slowly reversible. Mutagenicity in vitro but not in vivo. Carcinogenicity in more than one animal species. Reproductive effects that may be human relevant, including transient fertility reductions or changes in postnatal care, fetal toxicity without malformation. Pharmacological effects that may be irreversible or debilitating present below 1 mg/kg. Good dermal absorption with or without irritancy; potential for delayed sensitization; corrosive. Pharmacokinetics indicative of slow elimination and possible accumulation. NOEL 0.1–1 mg/kg/day. Dose–response curve with little margin between NOEL and toxicity. Acute lethal dose ⬍5 mg/kg. Potential for severe irreversible toxicity at low doses. Mutagenicity in vitro and in vivo. Evidence for human carcinogenicity. Embryotoxicity seen as malformations in the absence of maternal toxicity; clear effects on fertility. Pharmacological effects present at microgram doses. Severely irritant or sensitizing, with potential for anaphylaxis or other severe allergenic reaction. Pharmacokinetics show strong binding in a particular body compartment. NOEL below 0.1 mg/kg/day.

1

2

3

4

Source: Adapted from Ref. 3.

380

A Guide to Practical Toxicology 2nd Edition

published extensive guidelines on various aspects of occupational safety. In theory, the risks that have been identiﬁed are assessed and acceptable levels of exposure agreed against appropriate levels of containment and PPE, remembering that PPE is not the primary mean of avoiding exposure. These risks are then managed to prevent expression of the hazards identiﬁed, while maintaining awareness of costs and risk beneﬁt ratios. Sadly, practice is often very different. Assuming that hazards have been identiﬁed, the ﬁrst step is to identify whether substitution is possible. If not, then it may be necessary to consider exposure control, using the OELs/WELs, either locally or from central legislation or regulation as the guideline as to whether current exposure is acceptable or whether further control is needed. If necessary an exposure limit may have to be derived. Having set an exposure limit, it is important to identify how it is intended to meet it. This may include knowing what the processing equipment is capable of in terms of containment and knowing what additional equipment may be required ("bolt-on technologies") to achieve adequate control. This can be either derived from experience or manufacturer’s technical data or by experiment. It should be noted that using advanced equipment inappropriately to achieve a much lower limit than is actually required may have unacceptable cost implications. Look at the processes involved and the characteristics of the compound or the formulation to be used; if the main risk is by inhalation and the material is a liquid without chance of aerosol formation, the level of risk will be lower than for a low-density powder that can be easily blown about. It is normal to work to a worst case scenario and then to manage risks within those limits. Although appropriate measures may be put in place, it may be necessary to institute a regimen of measurement to monitor exposure of the workforce. The ﬁrst step would be assessment of actual concentrations in the workplace by the use of static and personal air samplers, and assessment of the residue on surfaces, during working and after cleaning. If necessary it may then be useful to analyze urine or blood samples from workers before and after shifts. These analyses can be for the compound itself or a metabolite or for a biological marker of effect. When all the above factors have been adequately controlled, the diversity of the workforce should be considered. There will probably be a range of people available for the work, ranging from young to old, from the healthy to those on medication of various kinds. They are likely to have varying susceptibilities to drugs or chemicals, deﬁned by their genetic polymorphisms or lifestyles; alcohol can interact with some chemicals encountered in the workplace and smoking can increase the likelihood of occupational disease. The workforce is likely to contain women of child-bearing potential and the reproductive effects of any chemical should be taken into account before allowing such people to work with it (Box 1).

Risk Assessment and Management in the Workplace

381

Box 1 Risk Management in the Workplace The following sets out a basic listing of risk management factors to be considered after hazard identiﬁcation, exposure assessment, and agreement on the extent of control required but before starting work with the substance: r Examine whether there is a less toxic substitute for the chemical (but beware r

r r

r

r r

r

r r

the hazards of substitution, as shown by the story of methylene chloride in chapter 16). Examine if the available equipment is capable of meeting the safety requirements or does it require modiﬁcation or replacement? If performance is known, the correct equipment can be chosen to achieve the necessary level of control, including equipment to monitor personal exposure levels, before and during processing. Decide on appropriate containment measures such as the use of isolators or cabinets and/or local exhaust ventilation. Engineering controls and PPE tend to increase in complexity (and expense) with increasing hazard category. Decide appropriate levels of PPE bearing in mind the type of work necessary, the efﬁciency of containment of the equipment, and the risks due to substance and process. PPE does not replace containment of the risk and is always a second-line approach. Ensure that the PPE is regularly tested, where appropriate. It is often faulty and due to complexity or lack of comfort in the working conditions it may not be properly used. Use a what-can-be-achieved approach rather than blind faith that compliance with impractical standards can be achieved. Consider any possible individual susceptibilities to the effects of the substance amongst the workforce. Handling—if the process is completely enclosed, there is not so much cause for concern. However, it is useless to enclose everything and then to handle powder manually out of a polythene sack using a hand shovel—even if the operator is wearing vast amounts of PPE. Bear in mind that incautious removal of contaminated PPE can lead to greater exposure than the process itself. Cleaning equipment after use can also be hazardous. Contaminated PPE can contaminate other things—for instance, personal clothing—and may need to be disposed off rather than cleaned or re-used. There may be a need for clean/dirty systems and changing on entry/exit from the workplace. Consider instituting a scheme of monitoring the workforce for systemic levels of the substance in the blood or urine or for a biological marker of exposure. This will be important to demonstrate compliance with COSHH. Have an appropriate set of COSHH assessments, and hence standard operating procedures that are relevant to actual practice.

382

A Guide to Practical Toxicology 2nd Edition

Monitoring for Exposure or Effect It should be normal to monitor atmospheric concentrations in the workplace to ensure that the equipment is operating according to expectation and that OELs for substances of concern are not being exceeded. It should be borne in mind that concentrations from one location to another—even in the same room—are likely to be different and that some processes are associated with higher exposure levels than others. This serves also as a check on the original predictions made during the various assessments. If adverse effects are suspected or expected, or if managing risks in certain industries, it may be appropriate to institute a scheme of health surveillance of the workforce. This has been carried out in occupations involving exposure to carcinogens, as with the workers involved in nickel reﬁning (4). Health surveillance includes biological monitoring, biological effects monitoring, medical surveillance, enquiries about symptoms, inspection for, e.g., chrome ulceration, and reviews of records and occupational records. Biological monitoring and biological effects monitoring have a place in monitoring exposure. Evidence of exposure may be direct (plasma or urinary concentrations of parent compound or a speciﬁc metabolite) or indirect as in markers of effect (cholinesterase inhibition or DNA adducts). The further removed the marker is from the actual cause, the less reliable it becomes (see discussion of biological markers in chapter 9, under “occupational toxicology”). Bear in mind however that health surveillance is a potential mineﬁeld, if there is any doubt about the effect being investigated. This is the case where the effect may be other than that intended for the ﬁnished dosage form (for medicines) or is otherwise unexpected. Precursor intermediates may cause different effects than the ﬁnished product. There is little sense in monitoring for effect if the resulting data are not understood or their consequences fully appreciated. Monitoring of workers can indicate the effects of elements or compounds to which they are exposed—but may not shed light on the signiﬁcance of such exposure. Chen et al. (5) monitored 25 workers in a storage battery factory for three endpoints using the micronucleus assay, comet assay, and a T-cell receptor gene (TCR) gene mutation test; 25 controls were age matched for gender, age, and smoking. The level of lead in the air in the workplace was 1.26 mg/m3 , which is somewhat higher than the levels indicated by the American Conference on Governmental Industrial Hygienists, quoted in Casarett and Doull (6). This source indicates a time-weighted average for the various compounds of lead in the region of 0.5 mg/m3 . The U.K. WEL for lead in air under CLAW is 0.15 mg/m3 (lead alkyls 0.10 mg/m3 ) 8 hours TWA. The workers blood concentration of lead was signiﬁcantly higher than in the controls (0.32 mg/L compared with 0.02 mg/L). This study showed statistically signiﬁcant increases in workers in micronuclei and micronucleated cells, and in tail length and moment in the comet assay relative to the controls. However, the TCR gene mutation test did not

Risk Assessment and Management in the Workplace

383

show any differences. The results of the micronucleus test and the comet assay indicate a degree of damage to DNA, which may be attributed to the relatively high levels of lead in these workers’ blood, although other occupational factors cannot be excluded. Ellenhorn (7) indicates that there is evidence for adverse effects of lead at less than 0.2 mg/L and that moderate lead poisoning, indicated by blood concentrations between 0.25 and 0.55 mg/L may be associated with neurological effect. Above these levels, in mild lead toxicity, myalgia or paresthesia, mild fatigue, irritability, lethargy, and occasional abdominal discomfort may be experienced. Rearrangement of the TCR gene has been noted in various leukemias. The results of two of these tests indicate a degree of DNA damage, the signiﬁcance of which is somewhat diminished by the absence of change in the TCRs. While it is possible to say that such DNA damage in the peripheral blood may be due to exposure to particular substances or mixtures, it does not necessarily indicate any quantiﬁable additional risk of cancer or other ill-health in the affected workers. The U.K. suspension level for blood lead is 30 ␮g/dL (0.3 mg/L; women of child bearing age) or 50 ␮g/dL (young people), or 60 ␮g/dL (general population). OVERVIEW The workplace is a distinct area in terms of risk assessment and management which is apparently simple (ease of containment, knowledge of chemicals involved, a deﬁned population, and known processes) but, on closer acquaintance, has a complexity that can be daunting. The process of risk assessment in the workplace is similar to that in other areas, but has to comply with speciﬁc E.U. legislation. However, many of the compounds used are precursor intermediates, which have relatively unknown toxicity in comparison with the ﬁnal product. As a consequence, data sets directly related to the chemical are often limited; this is a routine situation and requires some ingenuity in obtaining relevant information for a viable risk assessment. The resulting assessment should facilitate risk management through the setting of exposure limits, PPE requirements, and containment measures. Correct choice of exposure limits is critical to successful risk management in a commercial setting. Too high and adverse effects may be seen in the workforce; too low and the costs of containment and engineering measures may make the process too expensive to be ﬁnancially viable. Where a facility is routinely using many different chemicals, it is useful to categorize chemicals according to the hazards they pose. Bear in mind, however, that there will always be pressure to keep chemicals in the lowest possible category, as expense of production increases with hazard category. Finally, the complex legislative background must not be forgotten. This is seen in centrally set exposure limits, in requirements for health monitoring, for separate sets of regulations for substances such as lead, and for radiation. In putting management controls in place, it should also be remembered that the use of PPE is seen as a last resort in reducing worker exposure, not as the primary method.

384

A Guide to Practical Toxicology 2nd Edition

REFERENCES 1. International Programme on Chemical Safety. Assessing Human Health Risks of Chemicals: Derivation of Guidance Values For Health-Based Exposure Limits (Environmental Health Criteria 170), available at http://www.inchem.org/documents/ ehc/ehc/ehc170.html 2. COSHH. Essentials available at http://www.coshh-essentials.org.uk/ 3. Woolley A. A guide to practical toxicology, 1st ed. London: Taylor & Francis, 2003. 4. Sunderman FW Jr, Aitio A, Morgan LG, et al. Biological monitoring of nickel. Toxicol Indus Health. 1986; 2(1): 17–78. 5. Chen Z, Lou J, Chen S, et al. Evaluating the genotoxic effects of workers exposed to lead using micronucleus assay, comet assay and TCR gene mutation test. Toxicology. 2006; 223(3): 219–226. 6. Klassen CD (ed.). Casarett and Doull’s toxicology: The basic science of poisons. New York: McGraw-Hill, 2001. 7. Ellenhorn MJ. Ellenhorn’s medical toxicology, 2nd ed. William & Wilkins, 1997. (Now available as) Dart RC (ed.). Medical toxicology, 3rd ed. Philadelphia: Lippincott: Williams & Wilkins, 2004.)

16 Risk Assessment: Carcinogenicity, the Environment, Evolution, and Overview of Risk Assessment

INTRODUCTION This chapter looks at the use of risk assessment in carcinogenicity and the environment (including its international aspects), and moves on to consider the evolution of risk assessment and offer an overview of the ﬁeld. The intention is to look at factors that are relevant to each of these areas rather than write a standard operating procedure, as dogmatic rules for “how to do it” are unlikely to be relevant in every case.

NOTES ON RISK ASSESSMENT AND CARCINOGENICITY When looking at carcinogenicity as a toxicological endpoint, it is worth remembering that a very small proportion of cancer in humans is actually attributable to a speciﬁc chemical to which we may be exposed in our diets or at work. Given that cancer is a high-incidence disease of old age with signiﬁcant links to the normal human environment (in all its forms), it is very difﬁcult to partition the risks attributable to individual aspects of that environment and then pinpoint a cause for a particular cancer in a single individual without clear evidence of exposure. Risk assessment for carcinogenicity is further complicated by the natural presence in the environment of well-known human carcinogens such as arsenic or the products of combustion. In addition, individual chemicals cannot, for the most part, be classiﬁed black or white as carcinogens or noncarcinogens. The classiﬁcation of carcinogens drawn up by IARC (Table 7 in chapter 11.) indicates 385

386

A Guide to Practical Toxicology 2nd Edition

the gradation of certainty from the clear human carcinogens through those that are carcinogenic in one sex of one rodent species, to those few that are not considered to be carcinogenic. The risk of cancer is increased by a number of factors, including: r Diet: eating fruit is risky – not eating it is riskier. r Genotype/phenotype: Differential vulnerability of DNA (Xeroderma pigmentosum). r Lifestyle: Drinking, smoking, lack of exercise, sunbathing. r Occupation: Industrial chemicals, mining, exposure to asbestos. r Reduced immunological competence. r Ignorance of exposure or novelty of mechanism. These are crudely divisible into those that can be avoided—lifestyle choices such as diet, exercise, and smoking—and those that are unavoidable, due to phenotype or to ignorance of their signiﬁcance. Occupational exposure to carcinogenic chemicals or processes is not necessarily avoidable, due to personal circumstances and other sociological factors. Most occupational cancers have been due to lack of knowledge or understanding or simply ignoring it. In some cases, workers learnt to take actions that effectively reduced the risks, such as washing out nasal passages each day after nickel reﬁning to reduce the risk of nasopharyngeal cancer (1–4). Inevitably, ignorance has been a signiﬁcant factor in occupational carcinogenesis, from the scrotal cancer of unwashed chimney sweeps to the more recent exposures to chemicals such as benzene or cyclosporine. These later effects and slow attribution have been due to lack of understanding of carcinogenic mechanisms, poor prediction of effect, and the inevitable slowness and imprecision of epidemiological study, when there is a low incidence of an effect which is present as part of the normal background. There is also, apparently, a role for serendipitous observation by professionals; there is a clear tendency to be suspicious of any initiative that comes from the untrained public or which is in any way associated with “old wives tales.” It follows that these last perceptions are the most difﬁcult to deal with because of the following triangle of interest: The industry concerned will be seen as wanting to avoid costly clean-up or compensation, the government will be keen to avoid expenditure on research or diversion of resources, and the public is interested in ﬁnding out the cause of effect, apportioning blame, and receiving compensation, while maintaining suspicion of the other two sides. In this kind of atmosphere, the necessary growth of knowledge and understanding of all aspects of the case is unlikely to be smooth or progressive. The following sections look at factors in carcinogenicity and assessment of risk in this contentious ﬁeld. These include DNA vulnerability, genotype and phenotype, background incidence, data used in carcinogenicity risk assessments, thresholds in carcinogenicity, and low-dose extrapolation. Finally, there is a case study in carcinogenicity risk assessment and an overview of the ﬁeld.

Risk Assessment

387

DNA Vulnerability, Genotype, and Phenotype DNA, and the control of its expression, is central to carcinogenesis, either through direct attack or by changed regulation. Although much is made of genotoxicity due to low levels of synthetic chemicals, the level of naturally occurring damage should be considered in any overview of risk due to low levels of synthetic chemicals; this is explored in Box 1. Although change to DNA may be theoretically avoidable, there is no avoidance of genotype and its phenotypic expression—at least until the advent of designer babies. Some aspects of this are readily characterized, such as the DNA repair deﬁciency that is associated with xeroderma pigmentosum. Many others, however, cannot be deﬁned because of the diversity of inﬂuence and effect that is possible in an individual. For any individual, there is a balance between the processes of absorption, distribution, metabolism, and elimination of the chemicals that are naturally present in the diet, those taken as medicines or habit (alcohol or nicotine), coupled with any synergistic, additive, or inhibitory effects that any of them have on the others. The balance between these factors may result in different exposures to active metabolites or systemic levels between apparently similar people.

Epidemiology and Background Incidence The net result of the various risk factors is a background incidence of unattributable cancers, above which any new cause has to rise before it can be unequivocally identiﬁed by normal epidemiological techniques. Despite the inherent weakness of the epidemiological process, it is still human data that are the most easily accepted basis for risk assessment of human carcinogenicity. Identiﬁcation is reliant on initial observation, study of incidence in the target population, and in an appropriate control group, coupled with evidence of exposure. There may be evidence of a dose–response curve, where dose is indicated by degree or duration of exposure (years worked), bearing in mind that some workers are more heavily exposed than others due to differences in job, for instance, between production line and packers. The great value of human data is just that – it is human. However, the likelihood of getting all the foregoing factors in place, so as to facilitate a risk assessment based on human data alone, is small and decreases as the potency of the carcinogenic effect decreases. The type of effect being modeled is critical in terms of incidence in the target population compared with naturally occurring background. Contrast the relative certainty of vinyl chloride attribution (an unusual cancer in a deﬁned population) versus a chemical causing a range of cancers in the general population with undeﬁned exposures. The obvious problem here is that humans have to be exposed to the chemical before the assessment can be made. Problems arise when there is a signiﬁcant background incidence of the cancer, if differential diagnosis is poor and if there are unaccounted confounding factors, such as smoking, intercurrent disease,

388

A Guide to Practical Toxicology 2nd Edition

Box 1 DNA Vulnerability—Endogenous Damage and Repair DNA is a deceptively simple molecule, composed of only four nucleotides arranged in a regular primary structure, -but having great complexity in controls on secondary and tertiary structure, replication, repair, transcription, hence gene expression. It is highly vulnerable to oxidative or other attack or to changes in repair efﬁciency or gene expression (5). r Alkylating agents, such as dimethylnitrosamine and cyclophosphamide, r r r

r r r r r r r r r

introduce methyl- or ethyl groups into bases, leading to base pair changes or dysfunctional DNA. Oxidative attack on DNA bases can lead to base pair changes; UV radiation produces thymidine dimers. There are numerous cellular sources of oxygen radicals and hydrogen peroxide, including mitochondria, peroxisomes, and some enzymes. Fe2+ associated with DNA reacts with hydrogen peroxide as follows: Fe2+ + H+ + H2 O2 → Fe3+ + H2 O + HO The hydroxyl radicals damage DNA and Fe2+ can then be regenerated through NADH, making a self-perpetuating cycle of damage. Asbestos carcinogenicity has been attributed to generation of hydroxyl radicals in the presence of hydrogen peroxide and Fe2+ . Daily oxidative damage to DNA has been estimated at 100,000 oxidative hits per cell per day in rats and 10000 hits/cell/day in humans, assessed by analysis of urine samples for oxidised bases. Increased levels of 8-oxo-guanine have been noted in the lymphocyte DNA of smokers. Oxidative damage to DNA accumulates with age, associated with a decline in DNA repair. Planar molecules (such as estrogen metabolites) interact with DNA by intercalation into the structure producing disruption to processes such as repair and transcription. Inﬁdelity of DNA synthesis and repair leads to abnormalities of gene control or expression. Prevention of DNA damage is enhanced by antioxidants such as glutathione, ascorbic acid, tocopherols, and enzymes such as superoxide dismutase. DNA repair is provided by a range of enzyme systems. Defective DNA repair is seen in the skin cancer, xeroderma pigmentosum, where repair of UV damage is deﬁcient. Mutation of DNA may be passed on to daughter cells, producing heritable defects in cellular control. For example, the p53 protein arrests cell growth and protects against neoplastic responses; mutation in this gene is relevant to 50% of human tumours.

Risk Assessment

389

or prior exposure to other agents. For marginal carcinogens, the quality of the data is signiﬁcant and the vast amount of data required to achieve statistical signiﬁcance becomes limiting. Many small studies, conducted to different protocols with different assessment criteria, do not form a secure database from which to make an assessment of any precision, as it is usually not possible to combine all the data together to make a statistically sound basis for bulk analysis. Data Used in Carcinogenicity Risk Assessments for Novel Chemicals The use of long-term human exposure data is not an option for novel chemicals, although it may be possible to draw analogies with closely related chemicals already present in the marketplace or environment. Here, the backbone of carcinogenicity risk assessment is still (currently) the long-term bioassay in rodents, supported by other data derived from general toxicity, genotoxicity, and ADME studies. As indicated previously in chapter 7, the credibility of this fragile prop is being steadily eroded; in time, this system of assessment will be replaced by a more human-relevant set of tests. However, for the moment, data from rodent bioassays play a signiﬁcant role in carcinogenicity risk assessment, particularly for the mathematical models where the statistical power of the large group sizes and any dose–response curve can be taken into account. While these models and statistical power may give a ﬁg leaf of numeric security, this is reduced by the need for judgment to assess the inﬂuence of mechanism and other factors such as differences in ADME or pharmacokinetics between humans and rodents. This is quite apart from the fact that the doses in the two species will be radically different, and the high doses used in rodent bioassays may unduly inﬂuence the carcinogenic response. For proven human carcinogens, such as aﬂatoxins or diethylstilbestrol, there is good agreement between the affected tissues in animals and those that show cancer in humans. The problem is that this is true for proven human carcinogens, but this cannot be assessed a priori (from a point of epidemiological ignorance) for the vast majority of novel chemicals that are subjected to routine carcinogenicity bioassays followed by risk assessment. The use of bioassays in two species has been debated for some years, suggestions being made that the use of the mouse could be abandoned or that testing could be reduced by using one sex each from the rat and the mouse. Neither approach has achieved regulatory acceptance. In fact, among toxicological pathologists, the use of two species has been seen as an advantage, as the results in one could be used to offset the results from the other. Thus, the presence of increased tumour incidence in the livers of male mice could be discounted from human relevance by citing the absence of similar ﬁndings in female mice and both sexes of rats. Equally, if a chemical is carcinogenic in two species in a similar manner, it is very likely to have carcinogenic potential in humans at similar dose levels. This clarity decreases as the potency of effect decreases and as the mechanism moves from direct genotoxicity to indirect effect on the control of DNA

390

A Guide to Practical Toxicology 2nd Edition

expression, and hence, apoptosis and cellular controls. The presence of thresholds in the dose–response curves of many nongenotoxic rodent carcinogens is accepted as evidence that any tumorigenic effect expressed only at high dose levels is unlikely to be relevant to expected human exposure levels. This can be backed up by data from other safety evaluation studies and investigation of mechanism. Thresholds in Carcinogenicity In nongenotoxic mechanisms, where cellular control is deranged, a threshold indicates a point beyond which the cells can no longer cope with the mechanistic strains imposed upon them, as in the accumulation of protein in ␣-2u globulin nephropathy in male rats. Such mechanisms are usually tissue speciﬁc and often seen in one sex only at high doses. Tumours thus produced in rodents may be dismissed as irrelevant to humans due to lack of an equivalent mechanism, as with tumours in the lungs of mice exposed to methylene chloride (Box 3) and hepatic tumours due to peroxisome proliferation. In rodents, genotoxic carcinogenicity is roughly proportional to general toxicity, and is usually associated with a clear dose–response curve and can produce tumours in several tissues in males and females. As, theoretically, a genotoxic event in a single cell can lead to cancer, it has been generally considered that there is no dose threshold for this type of effect. However, biology is very rarely black and white and such assumptions are increasingly challenged, as indicated in Box 2. Although damage to DNA may become ﬁxed, no cancer will arise if the affected cell does not divide and if that process is not continued by further proliferation: mitosis is as important as mutation. To this may be added inﬂuences such as apoptosis and immune surveillance. Some carcinogens induce a reduction in cell division at low doses, showing J-shaped dose–response curves. Studies with AAF, in which treatment with AAF was followed by treatment with the tumour promoter phenobarbital, showed evidence of threshold effects (8,9). Where a carcinogen adds progressively to a mechanism that is associated with a background incidence of tumours, a true threshold will probably not exist. When there is no association between background mechanism and tumour incidence, it is likely that there will be a threshold. However, it is likely that there is a practical threshold below which the increase in incidence is indistinguishable from background. In effect, this is a no detectable effect level (NDEL) below which cancers caused by the chemical will remain unattributed to that chemical. Arsenic is widely present in the environment at low concentrations and everyone is exposed to it at low dose levels; however, it is clearly associated with carcinogenicity at occupational exposure levels. Although a chemical may be associated with an NDEL, does this mean that its use at low concentrations is acceptable and should we add to the carcinogenic burden that is already present in the environment, even if that is at low levels? Paradoxically, the NDEL would have to be deﬁned by epidemiological study—a science that is inherently not sensitive enough to make such distinctions.

Risk Assessment

391

Box 2 Thresholds in Carcinogenicity There is widespread agreement that nongenotoxic carcinogenicity is associated with thresholds of exposure, below which there is no increase in tumour incidence. Equally, there has been a long-standing belief that genotoxic carcinogens are not associated with such thresholds and that even low levels are associated with cancer risk; i.e., that the dose response is linear at low dose levels. r For a genotoxic chemical, it is theoretically possible for a single molecule to act on a relevant part of the DNA, for that change to escape repair and for it to be replicated in cell division, and for this to progress to a tumour. r There is no evidence of threshold for some ionizing radiations or diethylnitrosamine (6). However, using a promotion protocol with 2-acetylaminoﬂuorence (AAF; 12 weeks treatment with AAF followed by 24 weeks phenobarbital to promote liver tumours) no tumours were seen in the low dose group and one at the mid dose; at the high dose all animals had hepatocellular neoplasia. Nonlinearity was also seen for cell proliferation and hepatocellular altered foci (7). Mechanisms for thresholds in genotoxic carcinogenicity could be: r Inhibition of DNA repair; effects on cell cycle; interference with apopto-

r r r r r

sis; meiotic and mitotic recombination; direct interaction with the spindle apparatus; DNA methylation (7). Low-level DNA damage may delay the cell cycle leading to lower cell turnover. Response in some tissues for the same chemical may be linear but nonlinear in others. Indirect mechanisms of genotoxicity may result in thresholds. A carcinogen may show a J-shaped curve if it increases cell division or oxidative stress at high dose but inhibits them at low doses; this can result in a decrease in tumour incidence at the low dose (8). Modeling on the cell cycle shows the possibility of thresholds for genotoxic carcinogenesis (9). Linearity may be hidden within the background variability. Practical or pragmatic thresholds probably exist at background levels below which effects cannot be estimated practically. Saccharin epidemiology is said, by epidemiologists, to be compatible with a small but undetectable risk of bladder cancer (despite work showing that rodent metabolism is not relevant to humans) (10).

Conclusion: Although thresholds may not exist for all genotoxic carcinogens they do (probably) exist for some and may exist for individual tumour responses.

392

A Guide to Practical Toxicology 2nd Edition

Low Dose Extrapolation The basis of carcinogenicity risk assessment, using rodent bioassay data, is the extrapolation of effect from the high dose levels used in the short-lived animal to the much lower doses expected in long-life expectancy humans. There are two central problems to this. First, the effects seen at the highest dose level may be a result of pharmacokinetics and metabolism or mechanistic overload that are not present at the two lower dose levels. The signiﬁcance of this is that the effects at the high dose cannot necessarily be extrapolated from the two lower doses and that the dose–response curve is not linear in the section deﬁned by the data. The second challenge, given lack of linearity in the upper levels, is that linearity at dose levels lower than those tested cannot be assumed. As indicated in Box 2, there may be nonlinearity in responses to genotoxic carcinogens at low doses and, as a result, the shape of the response curve at low doses cannot be predicted without extensive experiment. The result of this unpredictability is a strong trend to conservatism in risk assessment, as models tend to use the upper conﬁdence limits of the dose–response curve and, as additional cover, a safety factor is added to that. Various models have been used, such as the Mantel–Bryan and Weibull models, and derivatives of these have been developed into mathematical monsters that try to take everything into account, including time to tumour and spontaneous tumours. The reliability of the ﬁnal result is inversely proportional to the number of assumptions that are made in producing it. Such mathematical complexity renders these models unsuitable for day-to-day use, returning risk assessment to a point where there is no false security offered by overconservative numbers produced by opaque processes and where expert judgment is essential. The problem is that judgment is open to challenge—scientiﬁc and legal. Having said that, a peer reviewed assessment of a full data package that includes comparative ADME, and mechanistic data is likely to produce a more realistic assessment of low dose effects and risks.

A Case Study in Carcinogenicity Risk Assessment There is a wide range of choice for case studies in carcinogenic risk assessment, mostly chemicals with a signiﬁcant history of use and a large database. These include known human carcinogens such as benzene or arsenic and rodent speciﬁc carcinogens such as D-limonene or trimethylpentane from petrol/gasoline. As a result of commercial sensitivity, the number of novel chemicals that enter risk assessment and have the full process published is quite small, although some new drugs may have had their data published for Japanese registration in journals, such as Japanese Pharmacology and Therapeutics. High-proﬁle examples, such as peroxisome proliferators, offer insight into the factors that need to be taken into account in risk assessment and indicate the type of action that needs to be taken to protect a compound so that it can be registered or its use can be continued (11).

Risk Assessment

393

Methylene chloride has been in use since the 1940s in industry for decaffeination of coffee, and domestically, as a paint stripper. The history of methylene chloride risk assessment and regulation is reviewed in Box 6; its history as a rodent and a potential human carcinogen is reviewed in Box 3. There is a large body of work published on methylene chloride, including human exposure studies, which has allowed a steady evolution of understanding of the hazards and risks associated with its use. The overall conclusion has been that the mechanism of carcinogenicity seen in mice is species-speciﬁc and that humans are not subject to signiﬁcant cancer risk. It is instructive to note that the more signiﬁcant risk is generation of carboxyhemoglobin and that this has been partly responsible for the reduction in occupational exposure limits over the years. Overview of Carcinogenicity Risk Assessment For chemicals already in the market or in the environment, carcinogenic risk assessment is the subject of academic research and debate, conclusions constantly evolving or changing as the database grows and understanding of mechanism deepens. For new chemicals the situation is more difﬁcult, especially where there is no human exposure data to assess ADME or actual exposure levels. For these chemicals, the main database is the safety evaluation conducted in vivo or in vitro. There is some ofﬁcial guidance; for example, an addendum on dose selection for carcinogenicity studies for the International Conference on Harmonisation (ICH) suggests that a positive result for tumorigenesis in rodents at 25 times the human exposure is probably not relevant as a risk for humans. This type of statement does not mean that such an argument will be accepted by every regulatory authority, therefore, it will still be necessary to have evidence of mechanism to back up any marketing application. In assessing the carcinogenic risk due to a chemical, especially where there is signiﬁcant environmental exposure or contamination expected, it may be useful to consider how much extra risk (additional cases of cancer) would result if it was introduced into the environment. An acceptable ﬁgure appears to be one in a million, although people may ask if they are the individuals likely to be affected. (With the advent of proteomics and genomics, individual risk assessment of this type is becoming more possible.) Where the risk of cancer is greater than one in a million there is a moral question to answer: Should it be accepted that the additional risk–in comparison with that already present naturally in the diet or in the wider environment–is tiny and so can be ignored or that imposing any additional risk, however small, is unacceptable? In any case, given the idea of one in a million cases, how can this be quantiﬁed and assessed in the face of the background incidence? In such cases, comparative risk and risk/beneﬁt analysis become important and subject to judgment that cannot easily be supported scientiﬁcally. In Scotland, it is normal for schoolchildren receiving free lunches to be given fruit as an alternative dessert, which almost certainly contains trivial residues of pesticides.

394

A Guide to Practical Toxicology 2nd Edition

Box 3 Methylene Chloride and Cancer Methylene chloride has been in use since the 1940s in various industrial applications and as a domestic paint stripper (see Box 6); as a result, there is a large amount of human and safety data. r A U.S. National Toxicology Program study completed in 1986 showed an

r r

r r

r

r

increase of benign and malignant tumours in mice and benign tumours in rats, following inhalation exposure; studies using drinking water exposure or intraperitoneal administration were negative (12). Various epidemiological studies have suggested increased incidence of pancreatic, biliary, and liver cancer, while others have refuted these ﬁndings (12). Increased mortality from prostate and cervical cancer was reported among cellulose-ﬁber–production workers with more than 20 years’ exposure. The same study did not conﬁrm earlier ﬁndings of increased biliary tract and liver cancer (13). A meta-analysis of data published between 1969 and 1998 indicated weak increases in risk for methylene chloride workers in respect of pancreatic cancer but judged that a strong causal link could not be drawn (14). Two cohorts of photographic ﬁlm workers were studied, having received exposures averaging 39 ppm (8-hour TWA) for 17 years (1311 men) or 26 ppm for 24 years (1013 men). There was no increase of death from any cause including cancer, and no evidence for effects on target organs identiﬁed in animal studies. Combining these results with other studies showed that exposure to methylene chloride does not increase the risk of death from any cause (15). A review of 10 years of work on the mechanism of methylene chloride carcinogenicity in mouse liver and lungs indicated that this is speciﬁc to the mouse. In the lung, this is probably due to DNA damage in the Clara cells, through interaction with a high-activity glutathione S-transferase unique to the mouse, which is present in the nucleus. DNA damage was not detected in other species, including human hepatocytes. Therefore, the mouse is not a good model for humans for methylene chloride (16). A critical review of the epidemiology literature concluded that cancer risks associated with methylene chloride exposure are small and limited to rare cancers (17).

Given the speciﬁcity of the mechanism of carcinogenesis in the mouse, its absence in other species, and the large body of epidemiological evidence, it is unlikely that methylene chloride exposure is associated with signiﬁcant human cancer risk at current levels of exposure, which are driven by a signiﬁcant risk of carboxyhemoglobin generation (12) rather than cancer.

Risk Assessment

395

There might be argument in favor of organically produced fruit to avoid such residues, but the cost could make supply of fruit ﬁnancially impossible. Quite apart from the endogenous chemicals present at far higher concentrations than the pesticides, the counter risk of reduced cancer prevention through not getting a daily shot of vitamins, trace elements and dietary ﬁber would hugely outweigh the risk due to synthetic chemicals. Finally, life is about mixtures and the carcinogenic impact of a single chemical has to be viewed in the context in which it will be used and consumed. No chemical is taken in isolation; even a medicine taken on an empty stomach is subject to the gastric environment and the excipients in the formulation. For chemicals in the diet, the biological matrix in which they are found has far reaching effects on bioavailability and there may well be synergistic or inhibitory effects due to other chemicals. These interactions cannot be incorporated into routine assessments, as they are too complex to model or predict; they represent a ﬁnal layer of uncertainty, which may always be present. NOTES ON RISK ASSESSMENT AND THE ENVIRONMENT Environmental risk assessment is a somewhat fraught area, in part not only due to its high public proﬁle, but also due to the complexity of the data and wide range of interactions that must be predicted and taken into account. The usual response to environmental disasters—especially from pressure groups—is invariably pessimistic, although the outcome is often less horrendous than expected. Recovery is possible and can be quite quick, as with some recent oil spills. For prospective assessments, there is the possibility that the risks are understated and that a larger problem may arise as a result. It is extremely difﬁcult to maintain a balance between angry prediction of irreparable harm and a reasoned assessment of data that may indicate safe concentrations of a chemical. Environmental risk assessment may be divided into retrospective examination of chemicals already present in the environment or prospective prediction of risk for new chemicals, such as agrochemicals. The difference between intentional and unintentional release into the environment should also be considered. Unintentional release may be from a single point such as an industrial facility or of widespread origin such as trafﬁc pollution, the release of CFCs from consumer goods, or the use of contraceptive pharmaceuticals, and subsequent environmental release of metabolites or unchanged drug. In theory, intentional release is more controlled or predictable, as with the use of pesticides, but this is not always the case. There is also a need to differentiate between chemicals present naturally and those that are introduced by human activity. While it is easy to dismiss any artiﬁcial chemical as pollution, it is less easy to do so with a compound present in the normal environment. In general, the natural chemicals only become a toxicological problem when they are present at concentrations signiﬁcantly greater than normal. Combustion is a case in point here; naturally induced forest ﬁres are a source

396

A Guide to Practical Toxicology 2nd Edition

of transiently high local concentrations of combustion products, from wood and other organic matter, which include dioxins. It can be argued that similar products produced from burning fossil fuels are not natural and so constitute pollution, especially as these are present at higher than normal concentrations and usually for longer periods. There is, therefore, a concept of excess discharge; using general toxicology as an analogy, there is an exposure level beyond which adverse effects may be expected and below which there will be no signiﬁcant (or detectable) adverse effects. The environment has the capability to cope with limited release of chemicals in much the same way that an animal deals with a low dose of chemical. There is the added complication that environmental risk assessment cannot be separated from sociological factors, and so it is very much more difﬁcult to bring forward a purely scientiﬁc solution that will prove acceptable to the people who feel themselves to be at risk. There is also an element of lack of control in environmental discharges, especially due to unintentional release from industrial facilities. The original concept of pollution avoidance according to the principles of BATNEEC (best available technology not entailing excessive cost) was too easily replaced by the unofﬁcial and unstated concept of CATNAP (cheapest alternative technology narrowly avoiding prosecution). BATNEEC has been replaced by Best Available Technology, although there is still consideration of costs. An unexpected aspect of local pollution is that contaminated sites may become wildlife refuges due to restricted human access and that, paradoxically, major clean-up operations may produce more harm ecologically than leaving them alone. Successful environmental risk assessment is dependent on appreciation of the interrelationship of many factors and the consequent prediction of the outcome. While risk assessment for other purposes may focus on one aspect of a chemical’s toxicity, this is not so easy in environmental terms due to the complexity of the ecosystem and the dependency of the whole on its individual components. Although it may be predicted that a pesticide or a genetically introduced chemical resistance may have little effect in a general sense, prediction of effects on single species and through that on the whole ecosystem may well be less easy. Factors in Environmental Risk Assessment Much of the difﬁculty with environmental hazard prediction lies with the simplicity of the test data compared with the complexity of the ecosystem and the difﬁculties encountered in assessing or predicting exposure. Single species tested in a laboratory environment do not necessarily give a sound basis for hazard characterization and risk assessment. Mesocosm studies may make this process easier but are likely to be undertaken towards the end of the development process due to cost. Certain substance properties make prediction easier, such as estrogenic activity, and these can be relatively easily tested for and related to the likely persistence of the chemical in the environment. Persistence is a signiﬁcant factor in

Risk Assessment

397

environmental risk, as shown by the relative persistence of TCDD and atrazine in the soil at 10 and 2 years, respectively. Where a process of degradation is identiﬁable, associated with a short half-life, this is an indicator of lower risk than for nondegradable chemicals. This presupposes that the degradation products have been identiﬁed, remembering that DDE, a metabolite of DDT, is also very persistent. In a manner analogous to that in protein binding in mammals, sequestration of chemicals into compartments, such as clay soils, implies potential for long environmental half-life and possible toxicity if there is a sudden release to produce high concentrations. However, high-afﬁnity sequestration may reduce immediate risk levels slightly. In terms of legislation in Europe, the regulatory framework for environmental risk assessment is based on the risk quotient, which is the ratio of the predicted environmental concentration (PEC) to the predicted environmental no effect concentration (PNEC). Typically, the PEC is modeled using data on expected market volume and usage data, together with estimations of diffuse or point source introduction, degradation, distribution, and fate. In some cases, these predictions are supported by analytical measurement. The PNEC is then estimated by using empirically derived effect or no-effect data from laboratory experiments, applying safety factors of up to 1000 depending on the uncertainties inherent in the test data. A risk characterization ratio (the PEC divided by the PNEC) of less than 1 indicates low risk while a ratio greater than 1 may indicate a relevant risk. The margins of safety (MOS) are also considered; the risk decreases with increasing MOS. This process and the reasoning involved is nicely outlined in an environmental risk assessment of methyl tertiary butyl ether (MTBE) carried out by a team from the European Fuel Oxygenates Association (EFOA), NCET (WRc-NSF National Centre for Environmental Toxicology), and ECETOC (European Centre for Ecotoxicology and Toxicology of Chemicals). This assessment is summarized in Box 4 and the full report is available on the internet through the referenced Web sites.

Box 4 Environmental Risk Assessment of MTBE Use in Europe An environmental risk assessment (18) was carried out for the use of methyl tertiary butyl ether (MTBE) in Europe, using the European Union System for the Evaluation of Substances (EUSES). MTBE is a highly water–soluble– octane enhancer used in petrol, at concentrations up to 14%. Leakage of MTBE into groundwater has caused concern in the United States due to potential contamination of drinking water; it has a pronounced taste and odor. This environmental risk assessment was performed for three uses of MTBE: as a fuel additive, in production of isobutylene, and as a pharmaceutical solvent. r Environmental distribution and fate: Most of the MTBE was expected to end up in the air, with a signiﬁcant percentage in water but virtually zero in biota with no bioaccumulation. MTBE appeared to be degradable in some circumstances but not in others; expected half-life in air was less than 6 days.

398

A Guide to Practical Toxicology 2nd Edition

r Predicted environmental concentrations (PECs) vary with site and type of use. Background concentrations are ⬍5 ␮g/L. The annual average local PEC for production facilities of 172 ␮g/m3 was similar to values reported for worker exposure which may be up to 1 mg/m3 . The highest local PEC of 37.7 mg/L was estimated for processing use. The highest reported concentrations in urban air were about 60 ␮g/m3 and were generally 10 ␮g/m3 or less. There were few data for MTBE in soils in Europe. r Effects assessment and predicted no effect concentration (PNEC): Acute toxicity tests indicated low toxicity to aquatic organisms. The amount of acute data justiﬁed the use of a safety factor of 100 (rather than 1000) applied to the lowest EC50 value to generate a PNEC. Using the lowest acute EC50 value for a freshwater organism (184 mg/L for Selenastrum capricornutum), gave a PNEC for the aquatic compartment of 1.84 mg/L. Chronic aquatic toxicity test data showed a 5-day no observed effect concentration (NOEC) for Ceriodaphnia dubia of 202 mg/L; a 21-day IC20 value of 42 mg/L for Daphnia magna; a chronic NOEC value of 26 mg/L was reported for the marine shrimp Mysidopsis bahia and a NOEC for reproduction in Daphnia of 51 mg/L. There were also further chronic toxicity data for Daphnia, fathead minnow and algae, although not all were completely compliant with OECD test guidelines. In view of the amount of data available, use of a factor of 10 to derive a PNEC from the lowest chronic (NOEC) value was justiﬁed for continuous (chronic) release. This gave a PNECaquatic of 2.6 mg/L, in line with the PNEC from acute data, which was used in the EUSES risk assessment modeling. The EC50 value for Mysidopsis bahia of 136 mg/L was used for intermittent releases, with a safety factor of 10, giving an intermittent PNECaquatic of 13.6 mg MTBE/L. r Risk characterization ratios (RCRs PEC/PNEC) and margins of safety (MOS): Except for the sediment and water environmental compartments, all of the RCRs were less than one and all of the MOS values were greater than one. The RCRs that were greater than one were for the use of MTBE as a feedstock for high-purity isobutylene manufacture. From monitoring data for production it was known that the PECs for the aquatic compartments were overestimates and that the true RCRs were probably lower than those calculated by the model. It was concluded that the environmental risk of using MTBE as a fuel additive, process intermediate, or a solvent was low. Where MTBE is released into the environment from production and processing, it was considered that more data and testing were required, including sediment toxicity testing and a sampling and analysis program to measure concentrations of MTBE in wastewater from sites producing isobutylene. Environmental risk assessment, in common with other areas of toxicological investigation, should be a dynamic process and is unlikely ever to be static, in view

Risk Assessment

399

of the continually increasing database. This is particularly true of high-proﬁle chemicals such as MTBE and TCDD. The latter has acquired a dire reputation that has made it into a toxicological icon of all that is chemically evil and (supposedly) man-made. However, even this is being reassessed in the light of new data and perspectives. Bruce Ames and colleagues have reviewed the effects of TCDD in comparison with those of other natural chemicals, particularly indole carbinole and ethanol, and the indication is that, although TCDD is very toxic, its effects should be seen in perspective with those of other chemicals (19). TCDD is an example of an environmental contaminant that is present both naturally and as a result of human activities. It is characterized by extensive animal toxicity but by few proven effects in humans. The doses humans ingest are, however, far lower than the lowest doses that have been shown to cause cancer and reproductive damage in rodents. The environmental concerns about TCDD have produced stockpiles of this potentially lethal chemical that, if spilled, could have devastating local effects. Any incineration of biological material can produce dioxins, as was complained about in a recent foot-and-mouth outbreak in the United Kingdom. This holds true for human crematoria as well: Should they be closed down? INTERNATIONAL MANAGEMENT OF ENVIRONMENTAL RISKS The environment is global and there is ready potential for transfer of toxic chemicals among countries either intentionally by transport of toxic waste or by natural processes such as river ﬂow or atmospheric pollution and precipitation as acid rain. There have been various attempts to manage toxic risks internationally, with varying success. In general, agreements made with an objective of stopping environmentally bad practice (usually for the beneﬁt of developed countries) are often signiﬁcantly weakened by the economic or humanitarian need to continue the same bad practices in less-developed countries. Thus, it may be acceptable to ban the use of DDT in the developed world because acceptable substitutes are available (albeit at higher cost). In contrast, in the third world, expensive alternatives are not economically available and the environmental risks are seen as less important than the beneﬁts. Likewise, it may appear sensible from a Western point of view to ban the transport of toxic material across borders, but if the result of this ban is large, ill-managed dumps of toxic waste, the environmental costs may well be greater than the risk of accidental spillage in transit. As a result, this type of agreement is often ineffective due to the inﬂuences of interested parties and countries; the wider the proposal, the more difﬁcult it is to reach an agreement that is effective. At this point, the mixture of politics with toxicology becomes unstable, to the extent that common sense and science lose out. THE EVOLUTION OF RISK ASSESSMENT The science of risk assessment is dynamic and evolving constantly. For toxicological risks, this has been due to increasing knowledge and understanding of interdependencies in toxicity and mechanisms of action, and to increased

400

A Guide to Practical Toxicology 2nd Edition

Box 5 Notes on International Management of Toxic Risks Management of toxic risks in an international context is fraught with difﬁculty and frustration; a risk that looks terrible in the West is likely to be acceptable in less-developed countries due to local conditions. Differences in risk perception among countries lead to different approaches and priorities. Toxicology has an initial role in this but then becomes subsumed in politics (20). r Toxicology can identify hazard, which will probably vary little for a single r r

r r

r r

form, but risk should be assessed according to local conditions and the use to which the material will be put. There is often signiﬁcant difference between international policy agreement and local implementation. International policy can be constructed on inappropriate or incomplete data or ﬂawed premises with little consideration for the side effects of such policy; this can lead to an unbalanced agreement that has undesirable side effects in other related areas. The assumption that all waste is immoral and hazardous is not a sensible starting point for effective policy construction. The most successful international agreements are regional, involving few countries, tackle an acknowledged deﬁnable pollution problem, have little cost impact on industry, and affect rich countries, which can administer them. Risk reduction cannot be equated with risk abolition. Agreements that are unfocused and have differing standards between developed and developing nations will probably be unsuccessful, as the good effects in developed countries will be balanced out by the continuing abuses in the developing nations. This is becoming increasingly apparent with the continuing arguments about atmospheric concentrations of carbon dioxide.

appreciation that risks should not be viewed and assessed in isolation. Risk is positive or negative, balanced on a host of supporting or dependent factors, to which must be added the perceptions of the people at risk and those who are attempting to manage that risk. Risk assessment results in regulation and management; greater knowledge and understanding should result in better regulation, although this is offset by the inherent (and understandable) conservatism of regulators working in the shadow of the principle that it is almost impossible to prove a negative—that chemical A is safe. Aspects of international toxic risk management are considered in Box 5. An inescapable factor in risk assessment is the increasing reﬁnement and sensitivity of analytical techniques. When a chemical has been branded toxic and harmful to health, the presence of tiny amounts, revealed by new methods, can result in huge efforts to produce a cleaner environment, even when the chemical is present naturally in greater amounts. Doull (21) points out that we tend to focus “on

Risk Assessment

401

the trees of individual effects rather than on the forest of public health. In the ﬁnal analysis, our mandate is not to use what-if toxicology to produce media headlines and stimulate funding for the investigation of phantom risks but to improve public health, and that should be the most basic principle of toxicology and all science.” The EPA established a range of 1 in 1 million to 1 in 10,000 for the incremental lifetime risk of cancer associated with possible exposures from contaminated sites, indicating the increased probability above background rate that someone could get cancer following repeated exposure. However, this ignores the risk from naturally present radiation, which is calculated to be 1 in 100. If natural risks are high, what future is there in attempting to manage lower risks from artiﬁcially introduced factors? The evolution of risk assessment for individual chemicals is illustrated by the history of methylene chloride, which shows the changing emphasis in risk assessment and regulation that occurs over several decades as a database for risk assessment is expanded (see Box 6). It also highlights differences between different regulatory bodies in the same country. With increasing knowledge and understanding, methylene chloride has been increasingly demonized as harmful. In contrast TCDD, while universally acknowledged as extremely toxic, has become less threatening. During the last 30 years, one of the greatest advances in risk assessment has been the increased understanding of the toxicity of chemicals present naturally in the environment, whether in the atmosphere, water, or diet. Equally, there has been understanding of the balance of nature: that generally the natural percentages of the individual chemicals to which we are exposed are not associated with any detectable epidemiological effect. Where that balance is disturbed and the percentages of certain chemicals increase beyond natural limits, as with increased solanine concentrations in insect-resistant potatoes, toxicity can result. Margins of safety in nature are frequently smaller than those set by regulators. For synthetic chemicals, the Delaney amendment may have looked sensible at one time but is clearly of questionable use now. OVERVIEW OF RISK ASSESSMENT In simple terms, assessment of risk due to toxicity is the process of extrapolation from a limited data set to a wider situation, such as the environment or the general population or a speciﬁc target group such as a workforce. The data set may contain human data, derived from accidental exposure, clinical or epidemiological studies, or safety studies in animals and/or in vitro. The application of the assessment may be local, national, or global. It should be remembered that relevance and utility are likely to decrease as the brief becomes wider because conditions differ from one place or population to another, either in exposure, collateral conditions or, signiﬁcantly, sociological factors. While it may be possible to arrive at an objective risk assessment for any given (local or regional) situation; application of the conclusions through risk management cannot be separated from local factors such as living standards including income, risk perception, and acceptance.

402

A Guide to Practical Toxicology 2nd Edition

Box 6 Methylene Chloride and Evolution in Risk Assessment Methylene chloride (MeCl2 ) was ﬁrst discovered in the nineteenth century. Large-scale production started in the 1940s (22). r 1940s: Used as a paint stripper, replacing lye—a caustic alkali—with advan-

r r

r r

tages of speed, nonreactivity, and, it was thought, safety. In 1946, the American Conference of Governmental Industrial Hygienists (ACGIH) set an 8-hour TWA of 500 ppm. Safety advice said that employees should keep their hands out of the solvent, because of skin irritation and skin absorption potential. 1960s: Approved for preparation of hop extract; residue maximum set at 2.2 %. Use in decaffeination of coffee approved with a maximum residue of 10 ppm. 1970s: MeCL2 was linked to formation of carboxyhemoglobin (COHb); the 500 ppm limit was associated with greater levels of COHb than the limit for carbon monoxide. There was evidence that 1000 ppm (allowed as a short-term exposure limit) led to CNS depression. It was also linked to cardiac arrhythmias, which was proved in 1976. In 1974 a limit of 75 to 100 ppm was proposed and, in 1975, ACGIH indicated a change to 100 ppm as an 8-hour TWA, although 500 ppm was maintained as a limit by the U.S. Occupational Safety and Health Administration (OSHA). The U.S. National Institute for Occupational Safety and Health set a limit of 75 ppm in line with limits set for carbon monoxide. 1980s: The ACGIH reduced its limits to 50 ppm. Links to cancer were suggested (Box 3). 1990s: OSHA proposed a change to a 25 ppm limit. This was the ﬁrst OSHA assessment to use physiologically based pharmacokinetic modeling. Industrial pressure was mounted for a 50 ppm limit.

Use of MeCL2 as a paint stripper has declined as knowledge of its toxicity has grown, with a return towards alkali based strippers and alternatives. This illustrates the hazards of replacing a supposedly hazardous compound or process with one that is supposedly safer, but unkown.

The ultimate use of the risk assessment—which should be based on an objective appraisal of the data and the indicated risks—should take into account any beneﬁts of using the chemical and all the collateral risks and factors. As with chlorination of drinking water in Peru (see Box 3 in chapter 13), the risks of nonuse may be greater than those due to use. Ultimately, environmental risk must be determined according to local conditions because global assessment is not always appropriate. Environmental risk assessment should take into account the risks that follow any clean-up process; what is the intended fate of the concentrated toxic chemical residues that result? It is better to optimize the production process and prevent the problem in the ﬁrst place.

Risk Assessment

403

Above all, risk assessment has to be communicated to people at risk and to risk managers in an understandable format; it must be user friendly not user hostile, which is not easily demonstrated for some of the more complex models. Depending on the audience, analogies and comparisons can be useful, for example, something can be said to be equivalent to drinking a small beer once a year for life, or causing as much (or more) of the same toxic effect as a lower concentration of another chemical known and widely acknowledged as seriously toxic. It is also important that any risk assessment should be honest and not distorted by undue emphasis on one aspect of the problem or by self-interest. An example of this is the “assessment” of genetically modiﬁed foods and organisms. For a genetically modiﬁed food, there are two main areas of risk—environmental release and ingestion. If the composition of the new food is similar to the existing variety without signiﬁcant change in concentration, it seems likely that the risk from ingestion will be little different from the risks due to eating the normal strain. The environmental risks are, however, potentially different. The role of environmental pressure groups is very important as they tend to concentrate on one aspect of a problem to the exclusion of all else, thereby, devaluing their own arguments. All too frequently, risk/beneﬁt and collateral factors are not considered. It is quite possible to arrive at an objective risk assessment, given a valid set of data and appropriate knowledge of the local situation. The real challenge comes when this assessment is brought into the political and sociological context of its use; science and politics are uneasy companions. At the end of this review of risk due to toxicity and its assessment, the following is suggested as a list of desirables for a successful risk assessment: r Look at all the data dispassionately. r Take into account collateral risks and local conditions, including any background presence or incidence of effect. r Include a risk/beneﬁt analysis where appropriate. r Make it usable, user friendly, and easy to communicate to those at risk. r Keep it honest, without concentration on a single aspect. r Combine this with local sociological factors that may increase or decrease the risk of use or how it is perceived and its consequent acceptability to those at risk. r Produce management proposals that are achievable and are themselves not associated with signiﬁcant risk.

REFERENCES 1. Doll R, Morgan LG, Speizer FE. Cancers of the lung and nasal sinuses in nickel workers. British Journal of Cancer 1970; 24(4):623–632. 2. Morgan LG, Usher V. Health problems associated with nickel reﬁning and use. Annals of Occupational Hygiene 1994; 38(2):189–198. 3. Kaldor J, Peto J, Easton D, et al. Models of respiratory cancer in nickel reﬁnery workers. Journal of the National Cancer Institute 1986; 77(4):841–848.

404

A Guide to Practical Toxicology 2nd Edition

4. Pincott JR. Personal recollections of his grandfather in South Wales. 5. Burdon RH. Genes and the Environment. London: Taylor & Francis, 1999. See also numerous papers by BN Ames and L Swirsky Gold. 5 Dybing E. Genotoxic carcinogens–is there a threshold? Notes from Satellite Symposium, Eurotox, September 2000. 6. Dybing E. Genotoxic carcinogens–is there a threshold? Notes from Satellite Symposium, Eurotox, September 2000. 7. Williams GM, Iatropoulos MJ, Wang CX, et al. Nonlinearities in 2acetylaminoﬂuorene exposure responses for genotoxic and epigenetic effects leading to initiation of carcinogenesis in rat liver. Toxicol Sci1998; 45(2):152–161. 8. Lutz WK. Dose-response relationships in chemical carcinogenesis: Superposition of different mechanisms of action, resulting in linear–nonlinear curves, practical thresholds, J-shapes. Mut Res 1998; 405(2):117–124. 9. Lutz WK, Kopp–Schneider A. Threshold dose response for tumor induction by genotoxic carcinogens modelled via cell-cycle delay. Toxicol Sci 1999; 49(1):110– 115. 10. Tomenson JA. Epidemiology in relation to toxicology. In. Ballantyne B, Marrs T, and Syverssen T, eds. General and Applied Toxicology, 2nd ed. London: Macmillan Reference, 2000. 11. Ashby J, Brady A, Elcombe CR, et al. Mechanistically-based human hazard assessment of peroxisome proliferator-induced hepatocarcinogenesis. Human Experimen Toxicol 1994; 13(suppl 2). 12. Riley DM, Fishbeck PS. History of methylene chloride in consumer products. In. Salem H, Olajos EJ. eds.Toxicology in risk assessment. London: Taylor & Francis, 2000. 13. Gibbs GW, Amsel J, Soden K. A cohort mortality study of cellulose triacetate-ﬁber workers exposed to methylene chloride. Journal of Occupational and Environmental Medicine 1996; 38(7):693–697. 14. Ojajarvi A, Partanen T, Ahlbom A, et al. Risk of pancreative cancer in workers exposed to chlorinated hydrocarbon solvents and related compounds: a metaanalysis. American Journal of Epidemiology 2001; 153(9):841–850. 15. Hearne FT, Lifer JW. Mortality study of two overlapping cohorts of photographic ﬁlm base manufacturing employees exposed to methylene chloride. Journal of Occupational and Environmental Medicine 1999; 41(12):1154–1169. 16. Green T. Methylene chloride induced mouse liver and lung tumors: An overview of the role of mechanistics studies in human safety assessment. Human and Experimental Toxicology 1997; 16(1):3–13. 17. Dell LD, Mundt KA, McDonald M, et al. Critical review of the epidemiology literature on the potential cancer risks of methylene chloride. International Archives of Occupational and Environmental Health 1999; 72(7):429–442. 18. Ahlberg R, et al. ECETOC/EFOA Task Force Report on Environmental Risk Assessment of MTBE, 2001. www.efoa.org/fr/mtbe environment/EFOA-ECETOC %20report.pdf or through the EFOA Web site (www.efoa.org). See also: Abernathy CO. A drinking water advisory: Consumer acceptability advice and health effects analysis on MTBE. In. Salem H, Olajos EJ eds. Toxicology in Risk Assessment. London: Taylor & Francis, 2000. A search of the European Environment Agency Web site (www.eea.eu.int) for “environmental risk assessment” showed 239 references.

Risk Assessment

405

19. Ames BN, Profet M, Swirsky Gold L. Nature’s chemicals and synthetic chemicals: comparative toxicology. Proceedings of the National Academy of Sciences of the USA revised 1990 and “Dietary pesticides (99.99% all natural)” at http://socrates.berkeley.edu/mutagen/ames.PNASII.html. 20. Kellow A. International Toxic Risk Management. Cambridge: Cambridge University Press, 1999. See also Illing P. Toxicity and Risk–Context, Principles and Practice. London: Taylor & Francis, 2001. 21. Doull J. Chapter 1 in Salem H, Olajos EJ eds. Toxicology in Risk Assessment. London: Taylor & Francis, 2000. 22. Riley DM, Fishbeck PS. History of methylene chloride in consumer products. In. Salem H, Olajos EJ eds. Toxicology in Risk Assessment. London: Taylor & Francis, 2000.

17 Evaluation of Speciﬁc Classes of Chemical

This chapter attempts a whistle-stop tour of the safety evaluation of different classes of chemicals. While I have attempted to focus on the practicalities of evaluation, there is, inevitably, a fair amount of regulatory detail. However, this should be seen as offering guidance rather than deﬁnitive regulatory advice in each area. The classes of chemicals covered in this chapter are as follows: r r r r r r r

Human pharmaceuticals Veterinary pharmaceuticals Medical devices Agrochemicals/Plant protection products Biocides Cosmetics General and industrial chemicals—REACH

This list is necessarily incomplete due to restrictions of time and space. For instance, consumer products such as toys and detergents are not covered. Toys, which have been very much in the news recently due to their content of regulated or banned substances, are regulated through the EU Toy Directive 88/378/EC and associated safety standards for toys (1,2). In regulatory terms, there are two divisions of chemical class: Those that are centrally regulated and those that are subject to self-regulation by the relevant industry with central authority interest conﬁned to monitoring, although monitoring may become management, such as banning or institution of restrictions. In Europe, the former are easily listed as pharmaceutical (human, veterinary, and some medical devices), agrochemicals and what, for the sake of convenience, can 407

408

A Guide to Practical Toxicology 2nd Edition

be loosely categorized as industrial or general chemicals. For these classes, authorization to market a product is dependent on central authorization; someone has to say directly, “You may market this,” often only for a speciﬁc use. A new use requires a new marketing authorization. The datasets for these chemicals have, historically, often been so large that they ﬁtted with difﬁculty inside a one meter cube. Regulatory control of the second group is looser and usually requires a statement to a central authority that marketing of a product will start on a particular date. No positive feedback from the authority is expected, although a speciﬁc refusal is always possible. This group includes consumer products—such as cosmetics, toys, and household products—some medical devices, and the food industry. Although this apparent laissez-faire approach seems to be quite laid back, it comes with a number of heavy responsibilities both on the marketing company and the safety assessor. In Europe, it is usually the marketing company which bears the responsibility for the safety and correct documentation of their product; when things turn pear-shaped they are the ones who go to court and face a number of penalties which may include prison. The circumstances of exposure to the different groups of chemicals also show marked differences. These can be summarized simply as follows: r Drugs: Controlled high-level exposure of a deﬁned population with intentional biological activity in humans. r Medical devices: Controlled exposure, often to a relatively undeﬁned population, usually without intentional biological activity in humans. r Veterinary medicines: Controlled exposure of the animal to a biologically active chemical with potentially low, essentially uncontrolled, exposure of consumers. r Agrochemicals and biocides: Uncontrolled, usually low-level exposure to agents with known biological activity that is not intended in man. r Cosmetics: Uncontrolled, widespread, sometimes high-level exposure, usually with no intentional biological activity. Control of exposure is exerted at several levels—regulators, physicians, users, and consumers. These different circumstances tend to drive the evaluation process in terms of testing objective and the subsequent risk assessment processes. For a drug, some risk of toxicological hazard is acceptable, depending on the indication for which it is to be used. Medical devices should be associated with low toxicological risk. It is clear that cosmetics should carry no signiﬁcant risks of toxicity, although some individuals will prove sensitive even to the most “hypoallergenic” product. Agrochemicals, plant protection products, or biocides—the name tends to vary according to global location—are frequently extremely active materials that are, by deﬁnition, toxic to their target organism. There are two groups (apart from production workers) exposed to agrochemicals at different levels—the person using them and the consumer; the risks acceptable to these groups are very different and are tested for and regulated accordingly.

Evaluation of Speciﬁc Classes of Chemical

409

The following account is based mainly on the European situation. However, I have added differences that are relevant in other major jurisdictions where I have had relevant information. Although each of the chemical classes considered here is regulated to a greater or lesser extent by individual governments, there is an overseeing role for the Organisation for Economic Co-operation and Development (OECD) which, for instance, has published guidelines on Good Laboratory Practice, toxicity, and environmental testing. The OECD has 30 member countries, principally in Europe and North America together with the prominent Paciﬁc Rim countries. While it is notable that India and Indonesia are not members, there are links with 70 other countries and nongovernmental organizations, giving the OECD a global reach and credibility. A study conducted to OECD guidelines should be acceptable globally. REGULATORY INFLUENCES Needless to say, there is a raft of regulations and standards to negotiate in testing any chemical. The principal standards are those of Good Manufacturing Practices (GMP), Good Laboratory Practices (GLP) for nonclinical tests, and Good Clinical Practices for clinical trials. These standards permeate through most of the testing paradigms; all are applicable to pharmaceuticals and cosmetics. While industrial chemicals and household products such as biocides (in the European sense) may not be subjected to clinical testing, any toxicity study should be conducted to GLP. While it might be argued that GMP is not strictly relevant to toxicity testing, the use of GMP-grade material is mandated in many test areas and, in any case, it makes good sense to be aware of the origins and purity of the material under test. An industrial chemical may not have a GMP certiﬁcate but it may be available in different purities up to and including analytical grade. These standards of study conduct are overseen and implemented by the major regulatory authorities, such as the Food and Drug Administration and Environmental Protection Agency of the United States, and the European Medicines Evaluation Agency and the European Chemicals Agency, the European Environmental Agency and the Japanese Ministry of Health and Welfare, not to mention the individual authorities in member states of the European Union. A further layer of oversight is provided by trade associations such as the U.S. Cosmetics, Toiletries and Fragrance Association and the European Cosmetic Toiletry and Perfumery Association, known as Colipa, the Association of the British Pharmaceutical Industry, the European Chemical Industry Council (Ceﬁc), and more. Table 1 gives a small selection of Web sites that may be useful in assessing regulation and testing requirements. One aspect to consider in all this is that the regulatory landscape has changed over the past few years. It used to be the United States that was the most difﬁcult market to launch a new chemical or application for an existing chemical. My opinion is that, it is now Europe that is the harder market to penetrate and this

410

A Guide to Practical Toxicology 2nd Edition

Table 1 Useful Web sites for Regulatory Standards and Requirements Oganization

Areas of concern

Web site

Colipa CTFA CAAT European Chemicals Bureau ECVAM

Cosmetics Cosmetics Alternative methods Chemicals Alternative methods

European Chemicals Agency (ECHA) European Commission

REACH, GHS

www.colipa.com www.ctfa.org http://caat.jhsph.edu/ http://ecb.jrc.it/ http://ecvam.jrc.it/index. htm http://echa.europa.eu/

European Medicines Evaluation Agency (EMEA) Food and Drug Administration, U.S.A (FDA) ICH Japanese Ministry of Health & Welfare (JMHW) Oragnisation for Economic Co-operation and Development (OECD) Environmental Protection Agency, U.S.A. (EPA) VICH

U.K. Medicines and Healthcare products Regulatory Agency (MHRA)

General site for European Union Human and veterinary medicines Medicines, some cosmetics, foods, medical devices Human pharmaceuticals Pharmaceuticals, cosmetics, and foods Testing guidelines and GLP

http://ec.europa.eu/

Pesticides, pollutants, any aspect of the environment Veterinary pharmaceuticals

www.epa.gov

Medicines, medical devices

http://www.emea.europa.eu/ www.fda.gov

www.ich.org http://www.mhlw.go.jp/ english/index.html www.oecd.org

http://www.fda.gov/cvm/ vich.html http://vich.eudra.org/. http://www.mhra.gov.uk

may be due to a risk averse approach to chemical regulation. There is always an equilibrium to be struck between risk and reality; both are difﬁcult to deﬁne objectively, but it is possible that the European balance has been pushed toward avoidance of trivial risks. There is sometimes the suspicion, in any jurisdiction, that scientiﬁcally dubious decisions are taken in the name of consumer safety, while actually being politically motivated. In Europe, there is frequent use of positive lists in annexes to the various directives and it is often necessary to get a compound onto such an annex in order to be able to market it in the European Union. A further complication of EU regulatory practice is that, while the overall picture may appear harmonized, there

Evaluation of Speciﬁc Classes of Chemical

411

may be local requirements or variations in deﬁnition, as with cosmetics and some pesticide products. THE BASIC TOXICITY TEST PACKAGE Although this chapter reviews the toxicity testing of a wide range of chemical types or classes, the toxicity package that is produced for most, with the notable exception of cosmetics, is broadly very similar. The basic elements consist of investigation of absorption, distribution, metabolism, and elimination (whether in an animal or in the environment), toxicity testing in animals, including evaluation of general and reproductive toxicity, carcinogenicity, and genotoxicity. To these basic elements may be added specialist pharmacology or environmental studies, so-called six-pack studies for worker safety assessment, or other more esoteric studies such as in silico predictions of toxicological effect. In each case, the end use for these diverse data is a risk assessment, which may be at multiple levels taking differing circumstances and extent of exposure into account, for instance, workers and consumers exposed to a pesticide. HUMAN PHARMACEUTICALS Nonclinical testing of pharmaceuticals is directed towards elucidating hazards that are relevant to human clinical use. The objectives of the program of tests that is undertaken are similar to other areas of toxicology, in that dose response and mechanism of effect are important and, at the end of the program of evaluation, an overview is developed as to the signiﬁcance of the various ﬁndings and whether the drug may be expected to be safe for its intended use. It is important to decide if the effects seen are due to mechanisms that are relevant to man and to dismiss those that are not. One of the purposes of toxicity testing for pharmaceuticals is to support clinical trials in the target species, namely man. Generally, short toxicity studies support short clinical trials in man; the ﬁrst human exposure generally being in healthy human volunteers who may receive single or repeated administration under controlled conditions. These early human studies are, essentially, toxicity studies, but conducted in a more inconvenient and less deﬁned species than most laboratory animals and with more demanding husbandry requirements; also, necropsy and histopathology are not options. Up to the later phases of clinical development, toxicity studies are usually the same length or longer than the intended clinical trial. In addition, for intermittent treatment regimens, it is usual to mirror the clinical intention or to use a slightly more frequent administration schedule. Thus, for a clinical intention of once weekly administration, it may be sensible to give the drug twice weekly in laboratory animals as this is a more rigorous examination of the drug. This also gives additional clinical ﬂexibility in trials should more frequent administration in volunteers or patients become necessary. The route of administration is usually the same as that intended clinically, although one which

412

A Guide to Practical Toxicology 2nd Edition

gives greater systemic exposure than the clinical route may be used in some studies to evaluate a worst-case situation. The test material should be the same as that used in clinical studies, and should be produced according to GMP. Having said that, there is some regulatory beneﬁt in conducting early studies, especially the genotoxicity studies, with a batch that is less pure than intended for clinical use. This allows the “qualiﬁcation” of impurities that may be present. Qualiﬁcation is the process where an impurity is tested along with the main molecule at concentrations that are similar or greater than those expected in the ﬁnal active ingredient. Endless problems are created by new impurities emerging late in the life of a pharmaceutical, either as a result of new synthesis procedures or, more banally, as a result of more precise analytical procedures. Substituting a sophisticated technique, such as LCMS, for a simple one like thin layer chromatography (this has happened) causes all sorts of problems— none of them easy to resolve. At the heart of pharmaceutical evaluation is a risk assessment process, which assesses hazard in relation to its acceptability in the patient population. The use of risk/beneﬁt analysis gives an idea of the type of hazard and risk that is acceptable across a range of clinical indications. In other words, more toxicity is acceptable (and tacitly expected) in the case of a cytotoxic anticancer treatment than in a nonsteroidal anti-inﬂammatory drug (NSAID), which may eventually be sold over the counter at pharmacies. In the case of anticancer drugs while cytotoxicity may be associated with acceptable toxicity, a receptor-targeted compound, such as imatinib mesylate, is likely to be more closely scrutinized. For risk assessment, pharmaceuticals are (theoretically) an easy target, as they are used in a deﬁned population at deﬁned levels of exposure. However, as usual, this simplicity is skin deep and the deﬁnitions swiftly become blurred by reality. The population is deﬁned insofar as they have an indication or group of indications that the pharmaceutical has been identiﬁed for. Within that population however, lurks a range of variations that affects the response of individuals to the drug. These include metabolic polymorphisms, comedication, diet, use of tobacco or alcohol, and a host of other factors such as intercurrent disease. The next indeﬁnite is exposure. Although a drug may be prescribed, this does not equate to administration; patient compliance is always a problem, either in clinical trials or in day-to-day use. Additionally, clinicians tend to exercise their freedom of choice and judgment and may under or overprescribe, as well as use the drug “off-label” for indications for which it has not been clinically tested. These uncertainties have a considerable impact on epidemiological studies and postmarketing surveillance. For epidemiological studies, that may be undertaken as part of a postmarketing surveillance program, the problems may be compounded because meta-analysis of several studies may be prevented by poor comparability between protocols and other confounding factors. For biotechnology products—meaning proteins such as antibodies and vaccines—the assessment is complicated by the need to ensure that the test species chosen for the evaluation is the most relevantly available. Although testing of

Evaluation of Speciﬁc Classes of Chemical

413

conventional small molecules usually demands two species, this may not be appropriate for a protein which is active in only one species. In these cases, it is usual to choose a species that is relevant to man or, in some cases to make a protein that is speciﬁc to the test species rather than man. This approach has been taken for the development of some interferons, where the mouse interferon was tested as an evaluation of the effects of the human protein. One of the most important aspects of early toxicity studies with pharmaceuticals, whether conventional small molecules or biopharmaceuticals, is the choice of starting dose for the ﬁrst studies in man. The FDA has produced a Guidance for Industry (3) on selection of ﬁrst-in-man doses for clinical trials. Partly because of its provenance, this is an accepted method of dose selection but the use of a simpler safety factor approach, based on the NOAEL in the pivotal study or studies, is still an option. This comfortable approach can fall apart disastrously in the case of biopharmaceuticals, as illustrated by the disastrous reaction of volunteers to administration of a novel monoclonal antibody, TGN1412 in 2006. Much has been written about this and this is not the place to summarize or elaborate on the literature. However, one of the lessons learned may include the consideration of the number of target cells compared with the number of molecules of drug being administered; this was suggested as one reason for the spectacular effects seen, although it has been disputed. Another consideration is the appropriateness, or otherwise, of the species used to predict human effects and the differences in pharmacological potency between the two species. With biopharmaceuticals, choice of the most appropriate species for the toxicity testing is a risky operation if the effects of the compound are not fully understood and the physiological and pharmacological differences among species not appreciated. Another aspect of pharmaceutical development is the requirement for many compounds for the conduct of toxicity studies in juvenile animals to allow their use in children. Until recently, drugs used in children had only been tested in adult animals and in adult patients. While some aspects of toxicity studies— in young rats or in peri and postnatal reproductive studies—may address some aspects of juvenile toxicity, they do not cover everything. Apart from the regulatory challenge of getting agreement to a program of such studies, the practical challenges are considerable, especially when administration to very young rats is required. Pharmaceutical development is now effectively driven by the ICH guidelines—the International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use, the guidelines which are readily available on the internet from the Web site given in Table 1. While all of the above has been driven by consideration of the process to get the drug into patients in clinical trials and thence to market, other studies are usually carried out on the drug substance and, in some cases, on intermediates that may be used outside closed production systems. These studies are aimed at evaluation of occupational health hazards and include studies such as acute inhalation exposure, dermal toxicity, and sensitization. Assessment of intermediates can be a tricky

414

A Guide to Practical Toxicology 2nd Edition

area, as there is usually not much money for a fuller toxicological assessment. In such cases, the proximity of the intermediate (in terms of structure and likely activity) to the ﬁnal drug substance is important. This is a read-across exercise in which the structures of the intermediate and the ﬁnal drug are compared, together with any information on structure activity relationships. The use of software for the prediction of toxicity is another way of assessing possible effects and so indicating the types of precaution, for example, personal protection equipment levels,which should be taken to avoid adverse effects on worker’s health. Depending on the geographical area of interest and the type of substance, there may also be a requirement to evaluate the environmental impact of pharmaceuticals [e.g., EMEA (4)]. Certain classes of compounds are exempted from this, including vitamins, peptides or proteins, carbohydrates, vaccines, or herbal products on the basis that they are unlikely to pose any signiﬁcant environmental risk. In Europe, this is a two phase procedure, of which the ﬁrst estimates the environmental exposure to the drug, and the second assesses fate and effects in the environment. The estimation of environmental exposure undertaken in Phase 1 is based entirely on the drug itself, rather than on any metabolites or taking route of administration into account; it is also assumed that the major route of entry to surface water will be via the sewage system. Data relating to the dose per patient, the percent market penetration (to give an idea of how many people will use it), the amount of waste water per person and the dilution are used to produce a predicted environmental concentration (PEC) for surface water. If this falls below 0.01␮g/L for surface water and there are no other environmental concerns, it is assumed that there will be no risk to the environment if the drug is prescribed as expected. Substances which are potential endocrine disrupters, persistent, or highly lipophilic may need to be assessed in any case. Phase 2 of the assessment is started if the PEC for surface water is more than 0.01␮g/L. This phase is itself in two tiers, A and B, in which a ﬁrst base set of studies is conducted to assess aquatic toxicology and fate and, if indicated, a second tier in which more detailed study of emission, fate, and effects is conducted. The ﬁrst part of tier A is to look at the fate and physicochemical properties of the drug; this includes an assessment of biodegradability and the sorption behavior of the drug, which is described by the adsorption coefﬁcient (KOC) deﬁned as the ratio between the concentration of the substance in sewage sludge or sediment and the concentration in the aqueous phase at equilibrium. A substance with a high KOC, retained in a sewage treatment plant, may reach the terrestrial compartment via spreading of sewage sludge. The aquatic effect studies of tier A include long-term toxicity in Daphnia sp., ﬁsh, and algae to predict a concentration at which effects are not expected; this is the predicted no effect concentration (PNEC), which is derived from no observed effect concentrations (NOEC) determined in the various studies. The ratio between the PEC and the PNEC is evaluated; and if this is less than 1, further testing in the aquatic compartment is not necessary. If this ratio is more than 1, further testing in tier B is needed. This phase includes investigation of sediment effects and effects

Evaluation of Speciﬁc Classes of Chemical

415

on microorganisms. The concentration of the drug in the terrestrial compartment is calculated unless the KOC is greater than 10,000 L/kg.

VETERINARY PHARMACEUTICALS VICH, or the International Cooperation on Harmonization of Technical Requirements for Registration of Veterinary Medicinal Products, was ofﬁcially launched in April 1996 and is in many ways similar in conception to ICH for human pharmaceuticals. There are, however, important differences in approach. For instance, there is emphasis on deﬁning residues in food producing animals, for the purposes of setting withdrawal intervals between treatment and harvest. This is interleaved with the need to set an acceptable daily intake (ADI) and, clearly, if the ADI is lower than that can be achieved by the residues found in the various tissues of the animal, there is a problem. In Europe, the process of registration of a veterinary pharmaceutical for use in food producing animals begins with establishing maximum residue limits (MRL), which is achieved by submission of a safety ﬁle (in essence, toxicity data) and a residues ﬁle. The residues ﬁle contains information on residues depletion, residues chemistry, and analytical methods for determination of residues in food. An MRL ﬁle has to consider aspects of the residues such as hormonal activity and, for antibiotics, whether the residues will have any impact on the human gut or on microorganisms used in industrial food processing. If no MRL is granted by the authorities, no use in food producing animals will be possible. For companion animals, an MRL is not needed. Tolerance studies in the target species are necessary for both companion and food producing animals, and they are a fundamental part of the safety assessment in target species. However, they play a minor role in the setting of ADIs for veterinary medicines. They tend to differ slightly in design from standard toxicity studies. For instance, some of the animals may not be necropsied; this is an important consideration when the animal concerned is a cow or a horse. The study list for a companion animal treatment is less extensive than that for a food producing animal. There is also a requirement for a user safety report, which considers socalled six-pack studies. These are skin and eye irritation, dermal sensitization, acute oral and dermal toxicity and, if relevant, inhalation toxicity. Environmental impact studies for veterinary medicinal products have a more intuitive relevance than those for human pharmaceuticals, if only because they are often given to farm animals and, if to a large economic animal, probably in large doses. The effect of ivermectin given to cattle on the longevity of their fecal cowpats has already been mentioned in chapter 9 and antiparasitic compounds are particularly examined in this process. The VICH guidelines on environmental impact assessment were published in two tranches (5,6). In a similar manner to the procedure for human pharmaceuticals there is a relatively straightforward Phase I and a more complex Phase II.

416

A Guide to Practical Toxicology 2nd Edition

The guideline places emphasis on veterinary medicinal products that will be used in food producing animals, that may not be individual treatments but may, for example, be used for treating a whole herd or ﬂock. A tacit assumption is made that a substance that is extensively metabolized will not enter the environment. Separate consideration is given to substances used in the aquatic environment, which may enter the wider aquatic environment and those in terrestrial situations. Questions asked in the guideline include one about antiparasitic compounds, which may be a reaction in part to the environmental effects of ivermectin; antiparasitic agents—but not those acting against protozoans—advance automatically to Phase II. If the concentration at which the product enters the aquatic environment is calculated to be less than 1 ␮g/L or the PECsoil is expected to be less than 100 ␮g/Kg, environmental evaluation of the product may stop at Phase I. Phase II provides recommendations for standard datasets and conditions for determining whether more information should be generated for a given veterinary pharmaceutical. The tests are broadly similar to those indicated for human pharmaceuticals with appropriate adjustment for aquatic and terrestrial compartments. Animals that are reared in intensive conditions and those on pasture are given separate consideration, as are aquatic animals. The end process is calculation of the appropriate predicted environmental concentrations followed by a risk assessment of the environmental impact. MEDICAL DEVICES This simple term covers a vast range of products which can be as simple as a walking stick, as complex as a cardiac pacemaker, or as mundane as a tongue depresssor. While medical devices are classiﬁed, for regulatory purposes, according to the general level of risk associated with them, for toxicology purposes they are classiﬁable by the extent with which they come into contact with the body. A device which will be implanted chronically requires more extensive evaluation than a temporary catheter or a needle and syringe for collecting a blood sample. The extent and duration of contact drives the testing and evaluation program that is required. The toxicity of medical devices is related to a number of aspects of their composition, as is the wider concept of biocompatibility, which relates to how they react with the tissues or ﬂuids that come into contact with them. Biocompatibility can be deﬁned as the ability of a biomaterial to promote a desirable tissue interaction. Since both the nature of the tissue and the response desired vary from case to case, it is a highly application-speciﬁc concept. Medical devices pose some interesting challenges in safety evaluation. They are supposed to be chemically inert with low biological activity and so no effect would be expected in a routine safety evaluation. Because a medical device is applied locally and has a discrete, usually solid form that is composed of a mixture of chemicals or ingredients, it is difﬁcult to increase the dosage in a meaningful manner. In contrast, pharmaceuticals are usually single active substances, which

Evaluation of Speciﬁc Classes of Chemical

417

are intended to exert deﬁned biological activity and may be expected to have effects in other locations, according to dosage and route of administration. While medical devices may produce effects due to poor biocompatibility, this is not necessarily equivalent to a deﬁned pharmacological action. While the process of safety evaluation for pharmaceuticals is relatively well deﬁned, for medical devices it is more diverse and the choice of strategy is dependent on a range of factors, such as form, location and duration of application, and the degree of invasiveness of the device (cutaneous, subcutaneous, or deeply implanted). In the course of contact with the body, there are a number of ways in which the device may elicit toxicity. These may be due to the chemical or physical characteristics of the material itself; reactions may be passive, as with toxicity due to chemicals or active as in attack by the immune system on the device. The presence of any leachate from the material (for instance, the leaching of a monomer from an incompletely reacted polymer or other chemical components of a plastic) should also be considered. Packaging may also have an effect on the device and thence on the body. Another layer of complexity is provided by methods of sterilization, which may react adversely with the material or the packaging. The use of ethylene oxide is an efﬁcient, low-temperature method of sterilizing medical devices, such as nontextile drapes used in surgery. As ethylene oxide is toxic—it is a genotoxic carcinogen—the residues that are permitted are tightly controlled so that the daily dose to the patient of ethylene oxide derived from a device is restricted to a few milligrams and levels should be controlled on the As Low As Reasonably Practical (ALARP) principle. In some cases, the location of an implanted device may mean that it is subject to gradual erosion with dispersion of particles into the surrounding tissues; this may be seen with metal hip prostheses. Depending on the design and precision of the interaction between the ball and acetabular cup of the device, small particles of metal alloy may be shed into the surrounding tissue and, ultimately may produce increased concentrations of the metals in the patient’s blood. There are two aspects to consider in this case: The local effects of the metal particles (it would be useful, if unlikely, to know the size of the particles produced and their rate of dissolution) and the systemic effects of increased concentrations of the metal. One aspect here is the specter of nanotoxicology; what are the effects of small amounts of metal produced at nanoparticle sizes and where are they sequestered or distributed to? Many metals have toxicities at high concentration and some may be associated with carcinogenicity; however, their presence at low concentrations does not mean that these hazards will automatically be expressed, and it is probable that the risks are very low. One of the concerns expressed about metal hip prostheses is that it has been shown that implanted patients have chromosomal aberrations in their peripheral lymphocytes. This does not mean, however, that similar aberrations are expressed in other tissues. The prostheses are set into the femur, and it is perhaps unsurprising that some effects should be expressed locally in the bone marrow. Furthermore, although such chromosomal changes might be taken as an indication of carcinogenic potential, there has been no epidemiological connection between

418

A Guide to Practical Toxicology 2nd Edition

the use of metal hip prostheses and cancer (or any other adverse effect), despite many years of use. More modern ceramic joints tend to avoid this controversy, although that does not mean that they are necessarily better than metal ones. Once again, it must be remembered that lack of knowledge or understanding does not imply safety of use, and an incompletely understood substitute may ultimately prove to be less safe than a well known standard material. The safety and suitability of most materials used in implants is not based on thorough mechanistic assessment, but on years of clinical use without apparent ill-effect. There is, therefore, a lack of knowledge and understanding of the biological effects of both novel and wellestablished materials. A clear determination of the ideal material for any given implant application remains an unattainable goal. The extent of contact for a device may vary for different parts; at its simplest, a hypodermic needle attached to a syringe for a blood sample collection comes into transient contact with internal tissues while the syringe itself only comes into contact with the liquid to be injected. For an infusion bag, the components of the device that need to be assessed include the material from which the bag is made, the catheter, and the needle used to effect the injection. If the bag is used for a blood transfusion, the interactions that are considered have to include those between the blood and the bag and the other components. Evaluation of a device may be based on the 18 parts of ISO 10993— Biological Evaluation of Medical Devices (7), published by the British Standards Institute. These cover all the expected aspects of toxicity, such as genotoxicity, carcinogenicity, and reproductive toxicity and indicate that the following aspects should be considered: r The materials used in the device. r Any intentional additives or unintentional contaminants resulting from the manufacturing process, or any residues such as monomers. r Substances that may leach from the device, including monomers or residual chemicals or degradation products. r Any other components and their interactions in the ﬁnal product. r The properties and characteristics of the ﬁnal product. The most basic set of toxicity data that should be evaluated for a device transiently in contact with the patient is cytotoxicity, sensitization and irritation, or intracutaneous reaction. To this may be added acute, subacute, and chronic toxicity; genotoxicity of components, local effects due to prolonged implantation, and compatibility with the blood depending on the type and duration of contact. As indicated above, the amount of data or number of endpoints to be evaluated increases with increasing duration and depth or degree of contact with the patient. However, it is important to note that ISO 10993 does not require that any particular tests must be carried out for any particular situation, simply that the toxicological evaluation as a whole, including any tests deemed necessary, must be designed, carried out, and evaluated by knowledgeable and informed individuals.

Evaluation of Speciﬁc Classes of Chemical

419

In evaluating a medical device, the prior use of the material in other devices is a powerful factor in reducing the amount of testing required and easing regulatory acceptance, always assuming that this use has not been associated with adverse reactions, of course. Needless to say, the simplest evaluation is that for a wellknown material for use in a similar device to those already on the market; the next level of complication may be exempliﬁed by a novel use for an existing material. A completely new material will need to be very carefully tested and evaluated before use in medical devices, especially if a new device is contemplated. In summary, medical devices present a degree of challenge and fascination that is not seen with simple chemical toxicity. There are extra dimensions to consider apart from the straightforward issue of dose of chemical at the sight of contact. The components of the device external to the body and the methods of processing in manufacture and use have to be considered in arriving at a viable assessment of the risks involved in its use. Toxicity, or biocompatibility, has to be seen as just one component of a complex risk management program that weighs and balances a wide range of risks and beneﬁts of often complex technology, over the entire lifecycle of a product. AGROCHEMICALS/PLANT PROTECTION PRODUCTS This is one of the areas of chemical legislation where a product may be regulated under two sets of guidelines or regulations. This is typically seen where a chemical has both professional—high-use, high-exposure applications, as with an agricultural herbicide, and lower use domestic applications, for example, in vegetable gardens. They are also more complex, in a regulatory sense, than other classes, such as pharmaceuticals, in that their safety has to be considered at several levels. This may be seen at following several levels of exposure in humans: r In workers exposed to the unformulated compound at the production facility. r In users exposed to the formulated product before or during dilution for application. r Bystanders who may be inadvertently sprayed with a diluted pesticide during its application to a ﬁeld. r In users exposed to the diluted product during use. r Unintentional exposure through contact with recently treated plants or soil. r Consumption of vegetables or crops which have been treated and have absorbed the compound. Routes of exposure, commonly, would be dermal or inhalation but the use of personal protection equipment by production workers or professional users should reduce exposure in these groups of people. Production or professional use would normally be carefully controlled through workplace management, and professional users may be required by law to have certiﬁcates of competence in order to apply or use the pesticide. There is, however, no such conﬁdence in the case of domestic users, and it is probably best to assume that instructions may not

420

A Guide to Practical Toxicology 2nd Edition

be followed and that the product is likely to be misused. In the United Kingdom, as a result, products destined for the home and garden market are subject to certain restrictions, e.g., unprotected use must not result in acceptable operator exposure levels being exceeded and/or the product must not be damaging to eyes. The result of this is that the ﬁnal concentrations of certain actives or coformulants in a home or garden product may be restricted. In addition to the human exposure considered here, there is exposure to unintended parts of the environment such as beneﬁcial insects (e.g., bees), nontarget plants, the aquatic environment, and exposure to other species through the food chain. DDT is the classic example of this last possibility. There are many emotive aspects of pesticides, and consumers often consider that their presence in foods is necessarily malign. However, the resulting drive towards organic produce does not take account of chemicals naturally present in food, many of which have not been tested to the rigorous standards of modern pesticides. In fact, those that have been tested have often been the subject of poor or incomplete study design and tendentious or at least questionable interpretation delivered as undeniable dogma. Organic production methods improve soil and animal husbandry but do not necessarily mean detectably safer food. A book published online (free) by the U.K. Pesticides Safety Directorate (8) gives a ﬂavor of the data requirements for pesticides in the European Union and contains links to the E.U. directives mentioned. Broadly, the basic dataset invoked at the start of this chapter is necessary, together with comprehensive environmental and ecotoxicological investigations. A notable difference from other chemical classes is seen in the reproductive part of the package, which usually includes a multigeneration study and avian reproductive evaluation, and there may be greater emphasis on irritation (dermal and ocular) and skin sensitization (usually only used for classiﬁcation and labeling purporses). The overall objective is to establish NOAELs, which can be used in risk assessments in the various areas of concern. The different exposures of workers and consumers are typically addressed in 90day studies for the former and studies of up to 2 years for the latter. One of the objectives is to calculate an ADI, against which modeled consumer intakes can be compared. One aspect to bear in mind is that there may be differences in deﬁnition across the European Union, for instance, between professional and domestic use. Although environmental studies are now a part of pharmaceutical development, they were ﬁrst conceived for agrochemicals and have reached a state of considerable reﬁnement. While pharmaceuticals may be expected to reach the wider environment indirectly through the sewage system or, occasionally, by accidental spillage into a river or water course, pesticides are deliberately applied to large areas of the outdoors and so have much wider environmental access and potential ecotoxicological effects. The studies (often termed Fate and Behavior studies) conducted are aimed at determining the fate of a chemical in the environment in terms of distribution, degradation (and mechanisms), and elimination from the ecosystem; this process is broadly analogous to the ADME studies conducted for pharmaceuticals. Any

Evaluation of Speciﬁc Classes of Chemical

421

indication that a chemical will persist unduly in the environment is a ﬂag for more extensive (and expensive) studies and more difﬁcult justiﬁcation of its use. PECs are calculated and persistence is assessed; degradation products are assessed to ensure that they do not have any adverse effects that add to those of the parent compound. The PECs for parent and degradation products are used to assess exposure of nontarget species in soil and water, potential contamination of drinking water or groundwater, and potential effects in crops which follow on from the treated crop. Potential toxicity to wild life is assessed by standardized laboratory tests using nontarget organisms such as birds, bees and other insects, ﬁsh, and aquatic invertebrates; effects on environmental bacteria are also assessed. Values for LD50 and LC50 are derived together with NOELs and NOECs and these are compared with the PECs. The overall goal is an indication of the overall toxicity of the material compared with the PECs to get an estimate of toxicity set against likely exposure levels. Internationally agreed trigger values are used by the European Commission to decide whether the risk is acceptable. While some of the studies are laboratory based and relatively easy to control, some are much larger and based outside in prepared containers or in the ﬁeld. The container studies include microcosm and mesocosm studies; other studies may make use of artiﬁcial streams. Ultimately, one of the species that could be exposed to pesticides or other agrochemicals is man, and it would seem sensible to obtain some information on the absorption, distribution, metabolism, and elimination of these substances in human volunteers. There has been much debate about the ethics of human studies with agrochemicals and, at the time of writing, there is considerable resistance to this, even to the extent of not using data when it has been generated. This does not seem to be entirely sensible. However, the recent advent of microdosing studies used for pharmaceuticals, where very small doses of radiolabeled compound are given to volunteers may be relevant to agrochemical development. The use of small doses is consistent with normal expected exposure to pesticides and, it seems likely that these studies, with their complex and expensive analytical techniques, will prove to be more easily justiﬁable for low doses of pesticides than for pharmaceuticals which are usually given at much higher doses than those studied in such experiments. There is some overlap between agrochemicals (or plant protection products) and biocides, which are covered in the next section. BIOCIDES The name biocide has greater resonance in Europe than in the United States where the deﬁnition tends to be a little narrower. Sufﬁce it to say, that the new European legislation, enshrined in the Biocidal Products Directive (9), is the toughest in the world. In Europe, the term covers four main categories with 23 product types, summarized in Table 2.

A Guide to Practical Toxicology 2nd Edition

422

Table 2 Biocidal Product Categories Category

Examples of product covered

Disinfectants and general biocidal products

Five product types: Human hygiene products; private and public area disinfectants; veterinary hygiene products; food and feed area disinfectants; drinking water disinfectants. Eight product types: In-can preservatives; preservatives for ﬁlm, wood, ﬁbre, leather, rubber, and polymerized materials; masonry; liquid cooling and processing systems; slimicides; metalworking ﬂuid preservatives. Six product types: Rodenticides; avicides; molluscicides; pisicides; insecticides; repellants and attractants. Four product types: Preservatives for food or feedstocks; antifouling products; embalming and taxidermist ﬂuids; products to control other vertebrates.

Preservatives

Pest control Other biocidal products

The approved chemicals are listed in Annex I of the Biocidal Products Directive; this sounds good until it is realized that there are only about 300 chemicals listed to cover the 23 product types listed in Table 2. The Biocidal Products Directive deﬁnes biocidal products as: Active substances and preparations containing one or more active substances, put up in the form in which they are supplied to the user, intended to destroy, deter, render harmless, prevent the action of, or otherwise exert a controlling effect on any harmful organism by chemical or biological means.

A biocide can be a single chemical, a mixture of more or less known composition, microorganisms, extracts, and oils of plants. Each of these categories has their own challenges in terms of safety evaluation; single substances are relatively straightforward but mixtures are notoriously difﬁcult to assess, the complexity increasing with the number of ingredients or components. In some cases, the active agent is produced by mixing two or more components at the point of use and so may differ from the original components; in these cases, the toxicological assessment has to cover the original unmixed chemicals and the (probably) more biologically active ﬁnal product. From the above, it is evident that biocides have a wide variety of uses and these come with differing levels of human exposure. In addition, some are relatively benign while others are very toxic. The data requirements are dependent on the product type and expected exposure levels; in some cases, where very low human exposure is expected, data requirements may be minimal. The objective of the directive is to show the following for each biocide: r That it is effective. r That target organisms are not subject to unacceptable effects, such as unnecessary suffering in vertebrates.

Evaluation of Speciﬁc Classes of Chemical

423

r That there are no unacceptable effects in nontarget organisms and in the wider environment generally. r Fate and distribution have to be shown, especially with regard to ground water and any consequent effects. r That there will be no harmful effects on human or animal health. This information is contained in the dossier for each product, which is required under the European Directive. The following is a broad summary of the contents of Annex II of the directive, which outlines data requirements for active substances. In addition to information on the identity of the active substance and its physicochemical properties and analytical methods, and its efﬁcacy, the following toxicity data (which are very similar to those required for pesticides) and ecotoxicological data are required: Toxicity studies: 1. 2. 3. 4. 5. 6.

Acute toxicity; oral plus one other appropriate route. Skin and eye irritation and skin sensitization. Metabolism in mammals; toxicokinetics including dermal absorption. 28-day or 90-day toxicity studies in a rodent and a nonrodent. Chronic toxicity studies in a rodent and a nonrodent. Mutagenicity studies in bacteria and cytogenicity and mutation in mammalian cells in culture; if these are positive an in vivo micronucleus test is required; further in vivo tests may be indicated. 7. Carcinogenicity study in one rodent and another mammalian species. 8. Reproductive toxicity to explore embryo development (in rabbits and a rodent) and fertility over at least two generations. 9. All available human data. Ecotoxicological studies: 1. Acute toxicity in ﬁsh and Daphnia magna 2. Inhibition of algal growth and microbiological activity. 3. Bioconcentration and extensive tests of fate in the environment, including degradation. All the work should be conducted according to GLP. There are also separate annexes giving the requirements for products, fungi and microorganisms, viruses, and other categories. Regulation of this type of product in the United Staes is carried out by the Environmental Protection Agency (EPA) using the Federal Insecticide, Fungicide and Rodenticide Act (FIFRA) as the legal basis. A full database, often required for biocides is known as a CORT (Chronic, Oncogenicity, Reproductive, and Teratogenicity) database. The EPA uses a tiered approach to data requirements for biocides based on the levels of exposure from their use. While high-exposure agents have broadly similar, detailed, data requirements to those for other pesticides, low-exposure agents require only the minimum data set out in Tier 1.

424

A Guide to Practical Toxicology 2nd Edition

This lowest set of data still requires acute toxicity, a 90-day–toxicity study by the most common route of exposure, teratogenicity in one species, and a battery of mutagenicity tests. In the United States, high-exposure antimicrobial pesticides have the same data requirements as other pesticides, whereas low-exposure antimicrobial pesticides require only “Tier 1” minimum data. The Tier 1 database includes an acute toxicity battery, one 90-day study (usually by most common route of exposure), teratogenicity (one species), and a mutagenicity battery. This might be an appropriate dataset for a preservative for nonfood–contact material. For low-exposure use including food contact, the dataset swells to include an acute toxicity battery (three routes including inhalation), eye and dermal irritation and skin sensitization, and a 2-generation reproductive study. COSMETICS This is an incredibly diverse group of substances and products that ranges from the application of small amounts to skin (perfumes and eau de toilette) that will not be rinsed off (leave on cosmetics, as they are known) or products that will be rinsed off such as soaps and toothpastes (rinse off products). They can be applied to skin in areas all over the body, which carry risks in increasing proportion to their intended area of use; for instance, a nail polish would be expected to carry less risk than a soap, which would be less risky to use than an underarm deodorant; products for use on the face and especially those around the eyes carry the highest risks and require special care in their evaluation. This simplistic list excludes products such as toothpaste (rinse off) or products intended for “intimate” contact, for instance, with genital mucosae (often leave on). In addition, the potential for an ingredient to be left on skin that is exposed to strong sunlight, especially sunscreens or tanning agents, leaves open the possibility of photoallergic reactions that can be extensive and disﬁguring. Until very recently, the safety evaluation of cosmetics followed the usual toxicological paradigm of tests in animals with some back up studies in vitro, genotoxicity studies, and the like. While this may continue to be the case in some areas of the world, in Europe, the testing of cosmetic ingredients and products in animals is being phased out. It is expected that this will eventually become a de facto world wide ban given that the European Union is a signiﬁcant market for cosmetics, and there will be little incentive to develop products solely for the European Union or to develop products that cannot be sold in the European Union. At the time of writing, no cosmetic product may be tested in animals in the European Union and, in fact, it is not permissible to sell such products in the European Union. For ingredients, the ban on the use of animals should be completely in place by 2013. In a document published in 2004 (10), the European Commission put forward a timetable for the replacement of animals in tests of cosmetic safety evaluation. This suggested a ban on testing and marketing of tested products or products that contained cosmetic ingredients which had been tested in animals in a progressive manner starting in 2009. On the basis of this

Evaluation of Speciﬁc Classes of Chemical

425

document, a testing and marketing ban would be put in place from March 2009 for ingredients tested in animals for skin corrosion, UV-induced–toxic effects (acute phototoxicity and photogenotoxicity), skin and eye irritation, and skin absorption and penetration. For all of these endpoints, alternative methods have been validated at the time of writing or are foreseen to be in place by the date of the ban. OECD guidelines (11) are in place for skin corrosion (TG 430 and TG 431), acute phototoxicity (TG 432), and skin absorption/penetration (TG 428). Also, at the time of writing, no validated alternative method was foreseen to be in place for acute toxicity and toxicokinetics and metabolism; the document also cited genotoxicity and mutagenicity in this category but did not clarify this inclusion, given the routine use of in vitro tests in this area. Other endpoints for which validated alternatives are not foreseen are to be subjected to marketing bans from March 2013; these include skin sensitization, subacute and subchronic toxicity, photoallergy, carcinogenicity, and reproductive and developmental toxicity. Given this swiftly changing legislative landscape, there is some difﬁdence about bringing new cosmetic ingredients to the marketplace. The legislation is somewhat unclear on the status of an ingredient, for example, a recently developed pharmaceutical excipient, which has been extensively tested in animals after the institution of the ban but which is then developed as a cosmetic ingredient. Would such an ingredient be banned from cosmetics, even though it was initially developed for another purpose? The evaluation of cosmetic products is relatively straightforward, although there are legislative differences among the various areas of the world. In the European Union, the formulation of a cosmetic product is assessed by looking at the ingredients and their inclusion levels against the various annexes of the Cosmetics Directive Council Directive 76/768/EEC. One of the challenges in cosmetic safety assessment (and a reliable source of incredible frustration) is the difﬁculty of getting sufﬁcient trustworthy information about the ingredients to be used. Are they cosmetic grade or the scrapings from some chemical barrel in the Far East? Does the MSDS (Material Safety Data Sheet) provided, actually refer to the ingredients to be used or is it a version pirated from a more ethical company? With the introduction of the requirement that cosmetic ingredients be produced according to Good Manufacturing Practices, it is likely that this problem will recede with time. In this respect, the use of fragrances is fraught with difﬁculty, and it is important to ensure that the proposed fragrance comes with a manufacturers certiﬁcate or purity, listing the known allergens (of 26 listed by the European Union) it contains and with safe use limits; a statement of compliance with the Code of Practice of the International Fragrance Association (IFRA) (12) is also useful. However, assessment of a cosmetic formulation is not as simple as reading tables in lists of ingredients and checking inclusion levels. The components have to be assessed for their potential to interact when applied, for instance, for the occurrence of nitrosation. Greater harmonization across the various jurisdictions is taking place gradually; the INCI system of cosmetic names (International

426

A Guide to Practical Toxicology 2nd Edition

Nomenclature for Cosmetic Ingredients) is gaining ground, leading to greater conformity of labeling worldwide. Differences remain however; in the United States water is called water but is aqua in the European Union; plant names are usually given in English in the United States but in Latin in the European Union. In the United States, sunscreens are treated as pharmaceuticals but as cosmetics in the EU. It is clear that the evaluation of new ingredients for cosmetics is one of the most swiftly changing areas of toxicity testing. It is also acting as a driver for the adoption of alternative methods that will, inevitably, have application in other areas, especially chemical testing demanded by REACH. There are some areas that are apparently intractable, or which have been seen to be intractable. These include in vitro investigation of subacute toxicity and carcinogenicity; however, as mentioned in earlier chapters, there is a good reason to believe that methods can be developed to assess these endpoints without the use of tests in living animals. The development of long-term hepatocyte culture and treatment systems is accelerating and it is likely that carcinogenicity testing in two-year studies in rodents will become increasingly discredited. It is difﬁcult, at this time, to see how some endpoints, such as those in reproductive toxicity, can be developed credibly without the use of rodents or other animals. However, other animal systems such as invertebrates should offer some scope for investigation and testing. All this activity will also have a knock on effect on risk assessment, as the data available will be very different from those currently used. There is a possibility that risk assessment for cosmetics will err towards the more conservative side and this is unlikely to be helpful in the long term. No cosmetic can be considered to be completely safe. A much abused term, “hypoallergenic” means simply that the product is less likely to produce skin sensitization than more normal formulations. Wherever a formulation contains a fragrance or a plant extract, it is likely that at least a small number of people will react adversely. One area that is attracting a lot of attention at the moment is the ﬁeld of nanotechnology. We have been exposed to nanoparticles in the form of endogenous particles such as chylomicrons, macromolecules, and the like, ever since we crawled out of the prehistoric seas. However, the advent of designed synthetic nanoparticles, which hold a lot of attraction in cosmetics such as sunscreens, has brought about a new ﬁeld of toxicology which will pose new challenges. GENERAL AND INDUSTRIAL CHEMICALS—REACH The following account, inevitably, has a regulatory ﬂavor to it. In most countries, there has been a long-standing requirement that new chemicals should be notiﬁed to the authorities in whichever country the chemical will be marketed. In general, the extent of testing has been decided on the basis of the volume of production; a chemical produced at 10 tonnes per year requires a less extensive testing program than one produced, for instance, at more than 100,000 tonnes per year. This has long been the case for new chemicals; existing chemicals had effectively been

Evaluation of Speciﬁc Classes of Chemical

427

grandfathered and, to some extent, ignored, unless some toxicological or other chemical crisis disturbed the even tenor of commercial existence. However, a new European initiative, REACH, has attempted to redress this anomaly by setting out to register and, if necessary, authorize or restrict all chemicals produced at more than 1 tonne per year. In Europe, existing chemicals were considered to be those put on the market before 1981; there were 100,106 of these. New chemicals (more than 4300) were brought to market after that date and were covered by the legislation relating to notiﬁcation of new chemicals. Existing chemicals remained largely untested and the resulting lack of knowledge of their properties was considered to slow the process of risk assessment and to make it more cumbersome. In contrast to the situation in the United States, where the National Toxicology Programme has long had a testing program for chemicals coming to its notice, there was no formal and centralized testing initiative in Europe. The promulgation of REACH in 2007 effectively (perhaps) removed the inertia that existed in Europe in respect of existing chemicals and was also intended to make registration of new chemicals easier. Particular attention will be paid in the early stages of the process to high-volume chemicals and to those of particular concern—those that are carcinogenic, mutagenic, or reproductive toxicants (CMRs) and those that are persistent, bioaccumulative, and toxic (PBT), and any that are very persistent and very bioaccumulative (vPvB). The onus is on the manufacturers to provide the data that will allow risk assessments of each chemical to be carried out; information will be sent to the European Chemicals Agency in Helsinki, Finland. Approximately 30,000 chemicals are affected by the legislation and the process for all of them is expected to take approximately 10 years. REACH stands for Registration, Evaluation, Authorisation (and restriction) of Chemicals. Producers and importers of chemicals in the EuropeanUnion in quantities of more than 1 tonne per year are required to produce information that includes a technical dossier that assesses the risks due to use and managing them. For chemicals produced at 10 tonnes per year or more, and for chemicals of concern (CMRs, PBTs, and vPvBs), a Chemical Safety Report is also needed. Evaluation of the submitted documentation is aimed at assessing its completeness as a dossier and on the need for further testing. Where a risk to health or the environment is suspected, action may be taken under authorization or restriction procedures. For instance, substances of very high concern (CMRs, PBTs, or vPvBs) may require authorization. Regulation of substances will extend to the pure chemicals and to their use in products. Restrictions on use may be put in place, and it is possible that a substance may be banned completely and/or that substitution will be required. The caveat on substitution should be considered here again; substitution of a known set of risks for a supposedly safe but novel and unknown chemical does not necessarily increase consumer safety. Successful negotiation of REACH is based on preparation of a dossier, which should contain the information laid out in Box 1.

A Guide to Practical Toxicology 2nd Edition

428

Box 1 REACH—Dossier Content The dossier that is sent to the European Chemicals Agency (ECHA) under REACH should contain the following information: r Physical chemistry r Toxicology r Ecotoxicology r Declaration of – – –

PBT CMR vPvB

r Chemical safety assessment r Chemical safety report—if tonnage is above 10 tonnes or safety is questionable The chemical safety assessment includes: r Human health hazard assessment; r Human health hazard assessment of physicochemical properties; r Environmental hazard assessment; r PBT and vPvB assessment. r If the manufacturer or importer concludes that the substance should be classiﬁed as dangerous or is PBT or vPvB, the chemical safety assessment shall include the following additional steps: – –

exposure assessment risk characterization.

The chemical safety report: r Documents the chemical safety assessment (for all substances for registration if manufactured or imported at more than 9 tonnes per year). r The main element of the “exposure” part describes exposure scenario(s) and the exposure scenario(s) recommended by the manufacturer or importer for the identiﬁed use(s). r The exposure scenarios describe the risk management measures which the manufacturer or importer has implemented and recommends to be implemented by downstream users. r These exposure scenarios including the risk management measures shall be summarized in an annex to the safety data sheet. Source: Adapted from Ref. 13. While Box 2 lays out the data requirements for each tonnage level, this may be better seen as a listing of the points which needs to be covered in any

Evaluation of Speciﬁc Classes of Chemical

429

dossier. Where information is not available, it is likely that additional testing will be required. However, it is axiomatic of REACH that new tests in animals should be avoided as far as possible. While each of the points would need to be addressed, part of the skill in dossier preparation will be to evaluate existing data and to say what is needed in addition in the form of new investigations. A typical dataset may include documentation of years of production but probably little epidemiological or occupational information, unless it has been a problem chemical in the past. Many of the published documents are likely to be academic studies, which do not quite match the data requirements; for instance, there may be a limited genotoxicity assessment in the Ames test which may also involve 70 other chemicals with little direct reference to the chemical of interest. Toxicity studies are likely to be old or very old and pre-GLP; furthermore, they are likely to have been published in obscure journals and to be available only in barely legible typefaces that have been photocopied 20 times. However, if the chemical in question is a member of a group of other compounds which have been extensively investigated, it is possible to read across from one to the others. This also applies if the chemical is one of a series, for instance, alkylamides; this group includes acetamide, methylacetamide, and dimethylacetamide, and so on. The number of permutations possible is clearly quite large and care should be exercised in choosing which chemicals to act as comparators. Clearly if this initial choice is limited (or simply wrong), the whole assessment will be ﬂawed. Two poor sets of data are unlikely to produce a good risk assessment. Such data weaknesses have to be taken into account in the ﬁnal report. It follows that read-across needs to be supported fully by other information, including physicochemical data and, where possible, QSAR or SAR predictions of effect. Box 2 Data or Evaluations Required for REACH These increase with increasing annual tonnage. The following is a sample of what is required and is not, necessarily, a full listing. The intention is to avoid new testing, especially in animals and this should be seen as a list of points for evaluation. Each of the following stages is additive. More than 1 tonne: r Physicochemical data r In vitro irritation & corrosion, skin sensitization (human data & LLNA), in vitro mutation in bacteria, and cytogenicity r Aquatic toxicity: Daphnia and algal growth inhibition r Degradation: Ready biodegradability is important More than 10 tonnes: r Physicochemical data, as above, plus light stability for polymers and leachates

A Guide to Practical Toxicology 2nd Edition

430

r Toxicity, as above, plus in vivo irritation r Gene mutation in vitro in mammalian cells and in vivo (if previous tests are positive) r Acute toxicity by two routes (oral & dermal or inhalation) r Toxicity to 28 days r Developmental toxicity in two species, unless screening study is negative r TK assessment derived from relevant available information r Aquatic toxicity, as above, plus short-term toxicity in ﬁsh, activated sludge respiration inhibition, degradation, hydrolysis – as function of pH r Environmental fate; absorption, desorption screening More than 100 tonnes: r Physicochemical data, as above, plus stability in organic solvents and relr r r r r r r r r

evant degradation products, dissociation constant, viscosity, and reactivity to container material Toxicity, as above, plus toxicity studies to 90 days, developmental toxicity, Developmental toxicity in two species Aquatic toxicity, as above, plus long term Daphnia toxicity and ﬁsh More extensive degradation studies including identiﬁcation of products Environmental fate—accumulation, preferably in ﬁsh, plus more on adsorption/desorption Earthworm toxicity Soil microorganisms Short-term toxicity to plants Methods of detection and analysis

More than 1000 tonnes r As above, plus r Conﬁrmation of rates of biodegradation rates r Additional environmental fate and behavior r Long-term–earthworm toxicity r Long-term toxicity testing on other soil invertebrates r Long-term toxicity to plants r Long-term toxicity to sediment organisms r Long-term or reproductive toxicity in birds Source: Adapted from Ref. 13 The quality of the available data will be a huge issue with REACH, when thousands of elderly chemicals will be assessed formally for the ﬁrst time, despite decades of use. The principles of Klimisch et al. (14) have been reviewed in some detail in chapter 13 and will not be revisited in detail here. Sufﬁce it to say, however, that reference to three of four papers conducted in the 1960s on issues of peripheral interest to the modern toxicologist are unlikely to be sufﬁcient for an

Evaluation of Speciﬁc Classes of Chemical

431

adequate assessment of risk. This applies just as much to the chemicals selected, as relevant for read-across, as to the subject of the assessment. The process of assessment for REACH includes the compilation of a database of information that can be assessed for quality and gaps. The intention is to be able to propose a testing program to the European Chemicals Agency that will ﬁll these gaps in the most expeditious manner, avoiding the use of animals wherever possible. The use of validated “alternative” techniques and of software to predict toxicity (QSAR, SAR), and other attributes such as metabolism will become vital parts of this process. One of the cornerstones of REACH is the process of authorization, restriction, and substitution for hazardous chemicals such as CMRs. Persistent and bioaccumulative substances will only be authorized if no suitable substitute is available, and if it can be shown that the socioeconomic beneﬁts from the particular use of the substance outweigh the risks to human health and the environment. However, as shown for methylene chloride in chapter 15, substitution of a substance perceived as hazardous is itself hazardous if the substitute itself is not fully understood. For some hazardous chemicals, there may be circumstances where human or environmental exposure is very limited and risks can be controlled or managed. Authorization may be granted to CMRs, if it can be shown that there is a safe threshold below which there are no “negative” effects on humans or the environment; in other cases, the beneﬁts have to outweigh the risks before authorization can be granted. It is clear that the process of authorization and restriction will have to be pragmatic; it remains to be seen how much pragmatism can be allowed in a society that is essentially risk-averse. Eventually, REACH will become integrated with the Globally Harmonized System (GHS) for the classiﬁcation and labeling of hazardous chemicals. This seeks to classify chemicals by types of hazard and proposes harmonized communication of hazard including labels and safety data sheets. OVERVIEW It is difﬁcult to distil a summary out of such a diverse set of information, given the varying circumstances of exposure of each chemical class considered above. However, when the whole area is considered from a distance, as it were, some points emerge that are relevant to all: r The basic driver is the identiﬁcation of the toxicological hazard(s) associated with the chemical or product concerned. r Are there any notable hazards associated with its breakdown products? r The circumstances of use of the chemical and its purpose—human pharmaceutical, agrochemical, or cosmetic ingredient—should be considered. r Likely human exposures should be considered; will this be direct or indirect; by which route; high or low level; short or long duration; intentional or accidental? r Likely environmental exposure should be assessed along the same lines.

432

A Guide to Practical Toxicology 2nd Edition

r The beneﬁts of using the chemical/product must be assessed against the cost and risk of doing so, always remembering that nonuse may also have undesirable consequences, for instance, continuation of an insect infestation in a grain store. r This risk assessment should indicate the acceptability or otherwise of the expected exposure to patients, users, consumers, the environment, and so forth. r The risk assessment may be speciﬁc to a relatively small population or may give rise to several risk assessments relevant to different levels of use and exposure. To this crude progression should be added the regulatory processes and requirements relevant to the chemical or product, and the ethical constraints that may exist in terms of conduct of animal testing. As indicated, the palate of tests available are broadly the same for every chemical class but the ones conducted in the evaluation of any particular test material are driven by regulatory and legal guidance that indicates not only the test type, but also usually dictates minimum design and quality standards (meaning, effectively, that all new tests have to be GLP-compliant). REFERENCES 1. British Standard Safety of Toys: BS EN 71, parts 1–11 and amendments; British Standards Institute (various dates). 2. Council Directive 88/378/EEC of 3 May 1988 on the approximation of the laws of the Member States concerning the safety of toys. 3. FDA Center for Drug Evaluation and Research (CDER). Guidance for Industry: Estimating the maximum safe starting dose in initial clinical trials for therapeutics in adult healthy volunteers, 2005. 4. EMEA. Guideline on the Environmental Risk Assessment of Medicinal Products for Human Use. Doc. Ref. EMEA/CHMP/SWP/4447/00, June 2006. 5. VICH GL6 (Ecotoxicity Phase I). Environmental Impact Assessments (EIA’s) for Veterinary Medicinal Products (VMP’s)—Phase I. 2000 6. VICH GL38. Environmental Impact Assessments (EIAs) for Veterinary Medicinal Products—Phase II, 2006. 7. EN ISO 10993-1. Biological evaluation of medical devices–Part 1: Evaluation and testing. International Standards Organisation, Paris/European Committee for Standardisation, Brussels, (2003). (Currently under revision); Available from BSI at bsi-global.com. 8. Pesticides Safety Directorate. Data Requirements Handbook (2006) available at www.pesticides.gov.uk/. 9. Biocidal Products Directive. Directive 98/8/Ec of the European Parliament and of the Council of 16 February 1998 concerning the placing of biocidal products on the market, 1998. 10. Commission of the European Communities. Timetables for the phasing-out of animal testing in the framework of the 7th Amendment to the Cosmetics Directive (Council Directive 76/768/EEC). Brussels, 1.10.2004 SEC(2004) 1210.

Evaluation of Speciﬁc Classes of Chemical 11. 12. 13. 14.

433

OECD guidelines are available at http://www.oecd.org/. International Fragrance Association. http://www.ifraorg.org/ European Chemicals Agency (ECHA). http://echa.europa.eu/. Klimisch H, Andreae M, Tillmann U, et al: A systematic approach for evaluating the quality of experimental toxicological & ecotoxicological data. Reg Tox Pharmacol 1997; 25:1–5.

18 The Future of Toxicity Testing and Risk Assessment

INTRODUCTION In the years since the ﬁrst edition of this book was published, there have been numerous developments in toxicological science and technique. During this time, the principle pressures have not changed and, in fact, may have become more intense. Regardless of your point of view, the pressure to avoid the use of animals is growing by the year. This point is exempliﬁed by the emphasis in REACH legislation in Europe to avoid the use of animals wherever possible; however, a cynic may dismiss this as pious hope rather than practicable expectation. The methods and philosophy of testing for toxicity are evolving constantly. The results of these tests form the foundations for toxicological risk assessment and this too has undergone evolutionary change, although perhaps not as blatantly as in toxicology. There is one unchanging aspect of toxicology and risk assessment and that is the responsibility to the general public in terms of chemical safety—even if safety, as a negative concept, cannot be proved. The consequence of this is that toxicity studies and any subsequent risk assessment should be conducted ethically and to high standards, whether in industry in support of a new pesticide or in a university as part of a Ph.D. thesis on a chemical naturally present in food. The conduct and results of toxicological study are under public scrutiny, unlike other sciences. As a result, there are pressures on how studies are conducted, how they are interpreted and the risks assessed, and how that is translated into risk assessment and management. Through all the pressures to change—use fewer animals, ignore that pressure group, keep those jobs, cure my baby, save my crops while not using toxic pesticides—the one thing that does not change is the 435

436

A Guide to Practical Toxicology 2nd Edition

unattainable public desire for a risk-free existence; the ability to use chemicals without any of the risks. The regulation of safety evaluation and risk assessment has evolved in the light of periodic tragedies such as the thalidomide disaster and is focused by fear of insidious diseases such as cancer. This is a reactive approach rather than proactive, although to be proactive requires a degree of foresight and lateral thinking that may not be encouraged by the dynamic interactions between the three main stakeholders—the public, regulators, and industry. The successes of safety evaluation and risk assessment are less trumpeted than the failures; these include the failure to predict an association in some patients between taking Vioxx and cardiac toxicity and the severe reactions in volunteers given TGN1412. Vioxx was, perhaps, an extreme example where there was no indication in the nonclinical studies in animals of any cardiotoxic potential. For TGN1412, the reactions in human volunteers were much greater than in the toxicity studies due to poor predictivity of the model chosen. In environmental terms, the problem is further illustrated by the difﬁculty of clearly assessing the effects of low, environmental exposure to endocrine disruptors and the consequences for human health; if there is a difference, what is its signiﬁcance? CHALLENGES FOR TOXICOLOGY Leaving aside such obvious episodes, where a block buster drug is withdrawn due to idiosyncratic toxicity in a few patients, one of the main challenges for toxicology, as I see it, is to correctly assess small differences from controls or background. Frequently, this involves detection of a difference in a test system and extrapolation to man. It is relatively easy to see a difference if it is clearly signiﬁcant—statistically, biologically, and toxicologically. This may be exempliﬁed by the sort of difference associated with a clear effect at the high dose and a dose-relationship combined with the support of other ﬁndings. The assessment of difference becomes more complex and less certain as the values approach background or historical control data. This is a problem because some of the most signiﬁcant differences may be small but be associated with long-term effect such as accelerated neurological decline or with cancer. These could include fractional changes in hormonal homeostasis or an insidious attack on renal function that may result in premature kidney failure in old age. Much chemically induced disease may be due to minor perturbation and imbalance in normal physiology. Such change is often only apparent late in life and retrospective health and safety control is not possible. An additional complication is that epidemiological study of close-to-normal events requires vast numbers of subjects and may only identify a problem when there has been a signiﬁcant effect on public health. The toxicological challenge, then is to detect small differences from normality and to assess them correctly in terms of their potential for long term effect in the target species or in the environment. As indicated by Liebler (1), toxicology

The Future of Toxicity Testing and Risk Assessment

437

has focused traditionally on exogenous agents; we should recognize the potential effects of long-term exposure to slightly varied concentrations of endogenous substances, although such change may be driven by exogenous substances. Another challenge is the increasing pressure to ensure that test systems are relevant, with some groups insisting that animals are not useful for predicting human hazard. Implicitly, this means a reduction in the use of animals and increased use of alternative test systems or reﬁned tests. Such reﬁnement may mean the use of fewer animals, with a consequent reduction in the statistical power of experiments. A reduction to 10 rats per group from 15 may not wreck the statistical utility of an experiment. On the other hand, a reduction from four to three per group for large, genetically inhomogenous animals such as dogs may fatally weaken the biological discrimination of an experiment; (at these group sizes you can nearly forget the statistics as only barn-door obvious differences will be ﬂagged as statistically signiﬁcant). Obviously, it helps to have the correct test system in the ﬁrst place. The toxicology for any substance should identify hazard and dose–response, for which the data are passed to risk assessment. This can be a delicate process which has to be right; it follows from this that the risk assessment has to be correct too. CHALLENGE FOR RISK ASSESSMENT AND MANAGEMENT The challenge for risk assessors is to take the toxicological data and then to correctly assess the hazards for people or whatever the target is. As before, the closer the differences are to normality, the more difﬁcult it is to characterize any hazard and to evaluate the risks. The risk assessor has to take toxicological data from animals or in vitro and to correctly assess that in respect of hazard and risk for humans in the process of risk characterization (Fig. 13.1). This requires an appropriate understanding of mechanism of effect and its relevance to humans. The problem for risk assessors is that the public tend to be risk averse and demand “safety,” when it cannot be guaranteed. For risk management, the challenge is to take the data from the risk assessment and manage the risks in a manner that does not impose pointlessly severe controls—requiring expensively unnecessary clean up or impossibly low exposure limits. The obverse is the need to ensure that the process is not so lax that people or the environment are not harmed as a result of faulty risk assessment and/or management. This balancing act will be critical as the European chemical legislation REACH starts to take effect. INFLUENCES ON TOXICITY TESTING AND RISK ASSESSMENT Current practice is being changed by new techniques used in early development, which are not subject to regulatory guidance or GLPs. These include the use of transgenic animals (knockout mice and rats, humanized mice) and microarray

438

A Guide to Practical Toxicology 2nd Edition

chips for the identiﬁcation of patterns of gene expression and changes in protein synthesis, together with increasingly sophisticated analytical methods. The amount of data produced is phenomenal and computational techniques are evolving to cope with the ﬂood. The problem is not a paucity of new methods but selection of the technologies that will be useful in the medium to long term. The increase in knowledge and evolution of understanding will always tend to move the goalposts and make previous practice look dubious; there is no easy escape from this. The use of such techniques may not be acceptable for mainstream regulatory toxicology but it is likely that, even for pharmaceutical toxicology, they will become more widely accepted. For instance, the use of human hepatocytes in comparative in vitro metabolism studies is now routine. However, these suffer from inconsistency of product due to the diversity of people from whom the liver samples are taken. If an immortal, metabolically competent line of human hepatocytes could be developed and made widely available, its use would increase by default and might well become a regulatory requirement in due course. The paradigms for toxicity testing and risk assessment are evolving continually as new techniques emerge. This is an evolution of both techniques and, in regulatory terms, study requirements. The advent of microdosing studies for pharmaceuticals, in which a dose of about 100 ␮g of a radiolabeled drug is given has meant that a smaller set of studies may be acceptable before ﬁrst administration in human volunteers. This type of study is dependent on highly sensitive analytical techniques such as accelerator mass spectrometry. The use of this type of study in human volunteers for new medicines may—and in my view should—open the door for similar studies with agrochemicals in humans. In practical terms, the development of new techniques and methods in toxicology will continue to reﬁne the process of safety evaluation. It is likely that the “–omics” will become more widely used as they are better understood and become less expensive. Metabonomics and the closely related metabolomics, in particular, offer considerable scope for the noninvasive, in vivo investigation of animal responses. In my view, and that of many others, we are a long way from replacing animals in toxicity testing, especially in studies of repeated administration. However, new techniques of culture are allowing increasingly long periods of exposure of cultivated cells or tissue slices and these techniques will grow in acceptance as they become more widespread. The pressure to reduce the use of animals will always remain, just as animals are likely always to be used; the pressure to reduce may be augmented by the emphasis in REACH to avoid the use of animals. Risk assessment is also developing with greater acceptance of concepts such as the benchmark dose and of Thresholds of Toxicological Concern. One aspect of risk assessment—a constant over many years—is the continual development of ever more sensitive analytical techniques. These can now detect levels of chemicals that are probably substantially lower than levels that pose any toxicological threat; however, the reaction is always “It’s there—save me!” Risk assessors sometimes

The Future of Toxicity Testing and Risk Assessment

439

have a rough relationship with the public who may not understand the toxicological signiﬁcance of low levels of chemicals—especially in relation to those occurring at higher concentrations in a normal diet. The risk assessor is faced with pressures that require him/her to appreciate reality while adhering to the precautionary principle and to balance public perception and understanding. For this to be achieved the exposure assessment has to be realistic and the assumptions have to be assessed for relevance. Overhanging all this is the question “What is an acceptable level of risk?” for the population concerned. All systems of toxicological evaluation and risk assessment when taken in isolation are fallible and this situation is unlikely to change. The public are more likely to tolerate a false positive than a false negative where predicted safety dissolves into a toxicological disaster such as thalidomide, benoxaprofen, or Vioxx. There will always be public pressure for better test systems and data and for ethical conduct of safety evaluations. However, because safety cannot be proved but merely inferred, there will always be a possibility of error, whether in a general sense (thalidomide) or in sensitive individuals (Vioxx). Complete abolition of animal use in toxicology or complete removal of all restrictions will not produce better safety evaluation. A scientiﬁc compromise offers the best way forward but may be difﬁcult to achieve without better communication with the public. UTILITY OF ANIMAL EXPERIMENTS IN RISK ASSESSMENT In looking at the future of toxicity testing the use of animals cannot be ignored. There is much debate about the utility of animal data in risk assessments intended for human use, much of it acrimonious and less than dispassionate. There have been numerous studies that show either that they are an essential part of the process or are completely useless; the ultimate conclusion must be that if you select your studies or compounds according to your argument and ignore the others, you can prove what you like. Like all the toxicity studies on any chemical, whether in vitro or in vivo, animal studies are a tool to be used to achieve the objective of a realistic assessment of the compound. As with any tool, they need to be used correctly and appropriately in order to give the most accurate result. During this process their limitations have to be realized and taken into account; this applies just as much to studies conducted in human volunteers or to reports of accidental exposure as to studies in transgenic mice or bacteria. No single study should be taken as the sole basis for a risk assessment; every study is one part of the database that is used and viewed as a whole package and animal experimentation is simply one supporting aspect of this process. Although there may be human data that can carry more weight than other evidence, they may not be deﬁnitive for the target population of the risk assessment. Frequently, there are fewer human data than would be considered sufﬁcient for a complete

440

A Guide to Practical Toxicology 2nd Edition

assessment and support from other sources is essential. It is axiomatic that animal studies that have been badly designed and conducted should carry less weight in any risk assessment and their data should be used (if at all) for support rather than deﬁnitive conclusion. However, this principle of data quality and integrity applies to any safety evaluation study in any test system, so animal studies are no different in that respect. Given the complexity of the overall objective of toxicological testing, it is unlikely that any single system will be capable of giving a reliable and reproducible answer—now or in the future. At the current stage of technological development in toxicity testing and understanding of mechanism, it is clear that animal experiments that have been properly conducted and interpreted are an essential part of risk assessment. This is not to say, however, that the use of animals will not decrease further or that their use cannot be further reﬁned. There is, however, a clear need to move forward and to develop alternative strategies, through the use of new models such as invertebrates or other vertebrates such as ﬁsh. DEVELOPMENT OF NEW TEST METHODS AND MODELS There are two broad approaches to development of test methods; one is to reﬁne existing methodologies and the second is to develop completely new test protocols or models. For the ﬁrst approach, it is possible to subject the test system to a wider range of investigations; this approach is exempliﬁed by the increasing use of rats in standard toxicity studies for bone marrow micronucleus assays or for behavioural tests for CNS safety pharmacology. Other possibilities are use of the comet assay for DNA damage, or the addition of new clinical pathology parameters such as troponin for cardiac damage; the examination of urine samples by metabonomics is also likely to grow in importance. The drawback of adding more and more investigations to the same study is that the complexity increases exponentially, making errors is much more likely. These can be straightforward logistical errors of omission or misadministration or sampling, or more subtle ones where the conduct of one investigation impacts on the results of another. Integration of new techniques into existing protocols is deﬁnitely going to be a growth area in the future. The work of Kramer et al. (2) in integrating genomics and metabonomics with traditional toxicity endpoints was reviewed in chapter 4 and it is clear that these techniques will develop and provide greater understanding of toxicity in standard laboratory models. Historically, new methods have included the local lymph node assay and the comet assay; these are clear success stories. Methods that have fallen by the wayside include the use of hydra in reproductive developmental testing and the use of chick chorioallantoic membrane test. These may still have potential in the new climate engendered by REACH. New methods under development include the slug mucosal assay for irritation, the long-term exposure of hepatocyte cultures and tissue slices and further development of methods for testing for mechanisms of carcinogenicity, as discussed in chapter 7.

The Future of Toxicity Testing and Risk Assessment

441

The development of new models is also an important factor in the future of toxicity testing. These include the use of invertebrates, as with the slug for the assessment of eye irritation and novel vertebrates such as zebra ﬁsh. Stem cells remain the great white hope of toxicity testing; their promise remains just that, at the moment, but may yet blossom. In developing new test methods the issue of reproducibility—within laboratories and between laboratories—must be considered. New tests must be robust enough to be transferred readily from one laboratory to another and also be capable of providing reproducible results. It is routine to repeat in vitro studies to conﬁrm the results of the ﬁrst test; at present these tests are performed at the same laboratory. However, there may be an advantage in performing conﬁrmatory studies in a second laboratory, especially where the data indicate a marginal effect, the reproducibility of which is subject to inﬂuences by statistical considerations and normal biological variation. To be successful a new toxicity screen should be r Robust: The test should be relatively easy in technical terms; complication r r r r r r

leads to error and specialist equipment means expense. New animal models should not have overonerous husbandry requirements. Readily transferable between laboratories. Understood: There is little sense in producing data unless the mechanism of their generation and their signiﬁcance is well understood. Reproducible: If not, its utility and relevance may be questioned. Baseline data for individual animals, plates, or replicates should not be so variable that change is indistinguishable from historical control data. Predictive: with good sensitivity and speciﬁcity. Quick: Lengthy experimental phases mean slowed development or lead candidate selection and additional expense. Cost effective: There is no future for any test if the costs outweigh the value of the results.

Ideally, any method should examine more than one endpoint. This is desirable even if it is addressed through several related models. It is expected that a transgenic mouse would be capable of expressing toxicity other than that shown through the gene of interest. All routine toxicity endpoints could be incorporated into transgenic assays. Any new method should be capable of showing a dose–response. Methods using transgenic animals have developed rapidly and the utility and relevance of these models will become clearer during the next few years; however, they may not fulﬁl the criteria suggested above for ease and speed of technical performance and cost. They have signiﬁcant potential in mechanistic studies, either for screening for an effect in a chemical class or series or for explanation of effect due to a single compound. There is also the possibility that a transgenic animal could be constructed specially to answer a particular question relating to toxicity.

442

A Guide to Practical Toxicology 2nd Edition

IN VITRO TOXICOLOGY AND THE FUTURE At the current stage of development, in vitro tests are good for mechanistic studies where single (or limited) endpoints are examined, although they are becoming more general in application. Investigation of a number of mechanistic endpoints, via a battery of tests, could be used to assess the presence of the individual mechanisms or events that lead to a complex conclusion. In terms of the 3Rs the most viable place for this could be assessment of the potential for human-relevant nongenotoxic mechanisms of carcinogenicity. They are also quick to perform and often inexpensive in comparison with traditional methods. Individually, in vitro tests are poor for examining multiple endpoints or toxicities that are multifactorial, such as eye irritation or reproductive effects. In addition, due to the limited viability of the preparations they are also poor for assessing the accumulation of effect that comes with repeated dosing over a long period, for example, the gradual but accelerated decline of functional reserve in nonrenewing or nonrepairing tissues like the CNS or the kidney. Although quick to perform, in vitro methods can be technically complex and, as a result, difﬁcult to transfer between laboratories. For an in vitro method to be accepted (especially for regulatory purposes) there must be understanding of the mechanisms and contributing or causative factors in the endpoint studied, plus understanding of how the in vitro data relate to the in vivo situation. From this position it should be possible to make reliable predictions of human effect. In furthering this process of acceptance, the correlation of the data resulting from new systems in vitro with those derived from established methods must be considered, especially where classiﬁcation is used to rank toxic hazard, but this should not necessarily be allowed to slow acceptance. This process of validation is highly contentious. While it is sensible to prove a concept with the use of chemicals known to target the test system under investigation (e.g., nephrotoxicity and mercuric chloride), use of the new test in parallel with the currently accepted methods is the surest way of achieving validation and acceptance. Using this approach, a percentage concordance with accepted methodology can be produced and the utility of the test or test battery can be assessed objectively. Retrospective testing in vitro tends to produce a range of scientiﬁc “excuses” for lack of success in various circumstances and, in my view, this tends to muddy the waters to a point where the utility of the method becomes unclear. To say that a test is 90% successful in predicting neuropathy, providing that certain criteria are met, is the same as saying that the test is handicapped to a greater or lesser extent. A cynic might say that understanding when a test will give a negative result (when a positive result would be counterproductive in your development plans) might unduly inﬂuence choice of test and lead to a false indication of safety. There is no satisfactory way round this dilemma, other than careful scrutiny of test choice and results. Although many people campaign aggressively for the use of animals in toxicity testing to be ended completely, it should be remembered that in vitro

The Future of Toxicity Testing and Risk Assessment

443

often means that animals are still used to provide organs, cells or subcellular preparations. This is true for ex vivo assays or for the harvesting of tissues for in vitro tests in which primary cultures are essential, for instance, to retain metabolic capabilities. In vitro toxicology has a great future for a host of reasons but has signiﬁcant weaknesses, which mean that complete replacement of animals in toxicity testing is unlikely at the current state of research. They offer potential for use in lead candidate screening assays and in mechanistic research, quite apart from their economic beneﬁts in terms of space and speed of conduct. Organizations such as FRAME, ECVAM (European Centre for Validation of Alternative Methods), and the Centre for Alternatives in Animal Testing at Johns Hopkins University in Baltimore play a signiﬁcant role in furthering new methods of toxicological testing (their websites are given in the Appendix). TOXICOLOGY IN SILICO The sciences of genomics and proteomics continue to develop quickly and offer considerable utility in screening for lead candidates; they can be used in animals or cell cultures. Following a single dose, the number of genes expressed in mouse liver, for example, increases nearly exponentially during the few hours after administration and the pattern of gene expression can be related to the toxicity manifested in the whole animal. The pattern of protein expression can be examined in an analogous way and, when used in conjunction with genomics, offers a powerful tool for assessment of toxicity in the short term. For prediction of long-term toxicity, these short-term methods may be limited by the difﬁculty of differentiating between normality and the slight changes that will result in long-term effects after prolonged exposure in vivo. THE FUTURE OF SAFETY EVALUATION AND RISK ASSESSMENT It is clear that new methods and models will play a far greater role in the future of safety evaluation and that there will be a continuation of the trend to reduce animal use. However, this should not be at the expense of credible experimental design. One area where animal use can clearly be reduced is by the abandonment of carcinogenicity bioassays, either in normal rodents or in transgenic mice. A cynic may say that the use of a transgenic mouse is a simple mean of shortening development times because they allow you to identify irrelevant tumours more quickly. However, this comfortable assumption has been shaken recently by the increase in treatment period for some models from 6 to 9 months and by increasing the numbers of animals used. The main precursor and hurdle to abandoning such long experiments is, however, the need to develop credible tests for carcinogenic mechanisms that are relevant to humans. The use of animals in toxicity testing is likely to continue for the foreseeable future because of the beneﬁts they offer in examining a whole functioning organism

444

A Guide to Practical Toxicology 2nd Edition

over an extended treatment period, with all the interrelationships between tissues, blood supply, and ADME that are currently not possible in vitro. For these reasons, as well as their multifactorial process controls, endpoints in reproductive toxicity, immunotoxicity, and general toxicology will continue to rely on animals. This does not mean, however, that the animal models currently in use cannot be reﬁned and made more relevant to humans by the use of transgenic methods or by the investigation of new species. For instance, the metamorphosis from larval form to adult insect has some similarities to the processes of organogenesis in mammals; strains of Drosophila sp. have been developed that have some aspects of human metabolism. The scrutiny of toxicology will continue and intensify due to the pressures on us all to make our assessments as safe and as accurate as possible, while maintaining the highest ethical standards in our work. Through all, we should be prepared to change and not be ruled by the “We have always done it this way” philosophy; tradition is not necessarily science. Lack of change is not an option but we should not forget that much toxicity testing is conducted to assess human safety; we should remember this as we attempt to reduce animal usage.

REFERENCES 1. Liebler DC. The poisons within: Application of toxicity mechanisms to fundamental disease processes. Chem Res Toxicol. 2006; 19: 610. 2. Kramer K, Patwardhan S, Patel KA, et al. Integration of genomics and metabonomics data with established toxicological endpoints. A systems biology approach. Toxicologist. 2004; 78(1-S): 260–261.

Appendix

USEFUL WEBSITES Regulatory Sites EPA (US Environmental Protection Agency): http://www.epa.gov/ EEA (European Environment Agency); the main European-level provider of environmental information to policy makers and the public): http://www.eea.eu.int/ FDA (Center for drug evaluation and research): http://www.fda.gov/cder/ (Center for biologics evaluation and research): http://www.fda.gov/cber/ EMEA (European Agency for the evaluation of medicinal products): http://www.emea.europa.eu ICH (International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use):http://www.ich.org Japanese Ministry of Health Labour and Welfare: http://www.mhlw. go.jp/english/ MHRA (UK Medicines and Healthcare Products regulatory Agency): http:// www.mhra.gov.uk/index.htm OECD (Organization for Economic Cooperation and Development): http://www.oecd.org UK Pesticides Safety Directorate: http://www.defra.gov.uk/ UK Health and Safety Executive: http://www.hse.gov.uk/ COSHH (Control of Substances Hazardous to Health regulations): http://www.hse.gov.uk/coshh/index.htm See Table 1 of chapter 17 also. Information Links US National Library of Medicine specialized information services: TOXNET: http://toxnet.nlm.nih.gov/ PubMed: http://www.ncbi.nlm.nih.gov/entrez/query.fcgi European Partnership on Alternative Approaches to Animal Testing: http:// ec.europa.eu/enterprise/epaa/brochure.htm

445

446

Appendix

Toxicology Societies British Toxicology Society: www.thebts.org/ US Society of Toxicology: http://toxicology.org European Society of Toxicology (Eurotox): http://www.eurotox.com European Teratology Society: http://www.etsoc.com/ US Teratology Society: http://teratology.org/ British Society of Toxicological Pathologists: http://bstp.org.uk/ US Society of Toxicologic Pathologists: http://www.toxpath.org/ Organizations Investigating and Promoting Alternatives to Animals U. S. A.: CAAT (Johns Hopkins Center For Alternatives To Animal Testing): http://caat.jhsph.edu/ Europe: ECVAM (European Centre for the Validation of Alternative Methods): http://ecvam.jrc.it/ U. K.: FRAME (Fund for the Replacement of Animals in Medical Experiments): http://www.frame.org.uk

Bibliography

GENERAL Ballantyne B, Marrs T, Syversen T. General and Applied Toxicology, 2nd ed. London: Macmillan; 2000. Dart RC (ed). Medical Toxicology, 3rd ed. Lippincott Williams & Wilkins; 2004. Derelanko MJ, Hollinger MA. Hanbook of Toxicology, 2nd ed. CRC Press; 2001. Gad S. Statistics and Experimental Design for Toxicologists and Pharmacologists. 4th ed. Taylor and Francis; 2006. Wallace HA (ed). Principles and Methods of Toxicology, 4th ed. Taylor and Francis; 2001. (Now available as 5th edition). Heath D. An Introduction to Experimental Design and Statistics for Biology. London: Taylor & Francis, 1995. Hodgson E. A Textbook of Modern Toxicology, 3rd ed. John Wiley & Sons; 2004. Klassen CD (ed). Casarett and Doull’s Toxicology, 6th ed. New York: McGraw-Hill; 2001. Lewis RA. Lewis’ Dictionary of Toxicology. Lewis Publishers; 1996. Timbrell J. Principles of Biochemical Toxicology, 3rd ed. London: Taylor & Francis; 2000. Tinkler JJB. Biological Safety and European Medical Device Regulations. London: Quality First International; 2000. Hongbo Z, Maibach HI (eds). Dermatoxicology 6th ed. CRC Press; 2004.

RISK ASSESSMENT AND OCCUPATIONAL TOXICOLOGY Illing P. Toxicity and Risk—Context, Principles and Practice. London: Taylor & Francis; 2001. Kellow A. International Toxic Risk Management. Cambridge: Cambridge University Press; 1999. Salem H, Olajos EJ (eds). Toxicology in Risk Assessment. London: Taylor & Francis; 2000.

ENVIRONMENTAL TOXICOLOGY Hoffman DJ, Rattner BA, Burton GA, Cairns J (ed). Handbook of Ecotoxicology, 2nd ed. Lewis Publishers; 2003. Shaw IC, Chadwick J. Principles of Environmental Toxicology. London: Taylor & Francis; 1998. Vos JG, Bossart GD, Fournier M, O’Shea TJ (ed). Toxicology of Marine Mammals. Taylor and Francis; 2003. Walker CH, Hopkins SP, Silby RM, Peakall DB. Principles of Ecotoxicology, 2nd ed. London: Taylor & Francis; 2001. 447

448

Bibliography

OTHER TEXTS Burdon RH. Genes and the Environment. London: Taylor & Francis; 1999. Evans GO (ed). Animal Clinical Chemistry—A Primer for Toxicologists. London: Taylor & Francis; 1996. Glaister J. Principles of Toxicological Pathology. London: Taylor & Francis; 1986. Grasso P. Essentials of Pathology for Toxicologists. Taylor and Francis; 2002. Kimber I, Maurer T. Toxicology of Contact Hypersensitivity. London: Taylor & Francis; 1996. Manser CE. The Assessment of Stress in Laboratory Animals. London: RSPCA; 1992. Penreath VW (ed). Neurotoxicology in Vitro. London: Taylor & Francis; 1999. Turton J, Hooson J (eds). Target Organ Pathology—A Basic Text. London: Taylor & Francis, 1998.

Select Glossary

Acute toxicity study. Single dose study in which administration is normally followed by 14 days observation and then macroscopic examination at necropsy. ADI (acceptable daily intake). The daily intake of a chemical that is expected to be without adverse effect when ingested over a lifetime. ADME (absorption, distribution, metabolism, and elimination). The basic processes that inﬂuence pharmacokinetic behaviour and, hence, toxicity. Angiogenesis. tumours.

The formation of new blood vessels, seen in embryos and

Apoptosis. The process whereby cells are programmed to die. Reduced apoptosis can lead to tumour formation. It is an essential part of embryonic development, where effects may be associated with teratogenicity. Contrasts with necrosis (q.v.). AUC (area under the concentration curve). A measure of systemic exposure via plasma concentrations. Short half-life generally leads to a low AUC. Biocoenosis.

An intergrated community of closely associated organisms.

Carcinogenicity bioassay. A study to assess potential for carcinogenic action when the test substance is administered for up to 2.5 years in rodents. Study duration with transgenic animals may be 6 or 9 months. Chromosomal mutation.

Any change in chromosome structure or number.

Chronic toxicity study. Usually a toxicity study of 26 weeks or longer. Clastogen or clastogenic.

Producing breakages in chromosomes.

Clearance. Measure of the removal of a substance from blood or plasma, expressed in units such as milliliter per minute. Clearance may differ among organs and total clearance reﬂects all these values. Cmax.

The maximum plasma concentration achieved after a given dose.

Corrosion. The production of irreversible damage at the site of contact as a result of chemical reaction with local molecules such as fats and proteins. Dosage. Synonymous with dose level (q.v.)—a rate at which a test system is dosed, e.g., milligrams per kilogram bodyweight per day (mg/kg/day). See dose also.

449

450

Select Glossary

Dose. An amount of compound administered on any one occasion, e.g., in milligrams per kilogram bodyweight (mg/kg) or, in clinical terms, milligrams (per person) per day (mg/kg). See dosages also. Dose level. The rate at which a compound is dosed, e.g., milligrams per kilogram bodyweight per day (mg/kg/day). Dose–response curve. The curve resulting when response is plotted against dose. A large increase in response for a small increase in dose indicates a steep dose–response curve. Some chemicals, such as paracetamol, show an early slow increase in this curve with a steep increase when a threshold of toxicity is exceeded. The dose–response curve may also be signiﬁcantly affected by relatively small changes in factors, such as protein binding (see also Therapeutic index). Dose volume. Usually used to deﬁne the volume rate for oral studies, e.g., millilitres per kilogram. Gene mutation. Changes in the DNA at one or more bases; these may be insertion of a base (frameshift) or the substitution or misreading of one base for another. Genotoxicity.

Modiﬁcation or damage to genetic material.

␣-2u Globulin. Protein produced in large amounts in the liver of male rats and excreted in the urine. Chemicals such as D-limonene and trimethylpentanol form slowly degraded complexes with it, which accumulate in the kidney and lead to a male rat speciﬁc nephropathy. The normal function of this protein may be to complex volatile pheromones and slow their release into the atmosphere. Half-life. The time taken for the concentration of a substance to reduce to half of the initial value. Usually measured in plasma but applicable to other matrices such as tissues, soils, water, and the atmosphere. Healthy worker effect. The bias that can be introduced into epidemiological studies where a workforce is compared with the general population. The working population is expected to be healthier than the general population, which includes long-term sick and unemployed people as well as the healthy and other workers. This concept is now being questioned. Hepatocytic hypertrophy. Increased size of the hepatocytes, typically around the central vein of the liver lobule (centrilobular). It is characterizsed by greater distance between nuclei (increased cytoplasm) and is usually due to enzyme induction. Hyperplasia. An increase in a normal cell population, which can be seen in response to hormonal disturbances, to changes in the control of apoptosis or to increased cell turnover as a result of direct cellular toxicity. Irritation. A reversible non-immunologic inﬂammatory response at the site of contact with a test chemical. May be seen following various routes of administration including dermal, parenteral, gastric, or inhalational.

Select Glossary

451

Limit dose. Usually, the highest practical dose used when no effect can be elicited in a particular study. For example, the limit dose for acute toxicity in pharmaceutical development is usually 2000 mg/kg; use of a single group or exposure is usually acceptable in these circumstances. LOAEL (lowest observed adverse effect level). The lowest dose level or concentration at which adverse effects were seen. Log P. Octanol–water partition coefﬁcient;, a measure of lipophilicity that infuences ADME. Skin permeability increases with log P over the midrange; low and high log P values are associated with lower skin permeability. ␣-2u (or ) microglobulin.

See ␣-2u Globulin.

MRL (maximum residue limit). The maximum acceptable concentration in foods for pesticides or veterinary drugs. MTD (maximum tolerated dose). The MTD for a chemical depends to a large extent on the type of test contemplated. Although it has been used extensively in relation to carcinogenicity bioassays to indicate a 10% reduction in bodyweight gain, this is not appropriate in shorter studies where more severe toxicity is implied. Broadly, the MTD in any test type is one that elicits toxicity but does not compromise the survival of the test system during the course of the experiment. The MTD for a short exposure or single administration is likely to be signiﬁcantly higher than that for a long exposure or chronic toxicity study. Mutation. A change in the DNA which may be transmitted by division and give rise to heritable changes, if the initial change is not lethal. A reverse mutation causes a reversion to the wild type, as in the Ames test; a forward mutation test detects mutants in wild-type bacteria. Necrosis. Death of tissues or individual cells within a tissue, for example, single cell necrosis seen in liver. Unprogrammed cell death that contrasts with apoptosis (q.v.). NOAEL (no observed adverse effect level). The dose level or concentration that is associated with treatment-related change that is not considered to be adverse. This is a useful concept where there is no NOEL, but where effects are transient or due to intended properties of the compound. Often used as the starting dose for risk assessment, which is divided by uncertainty factors to determine “safe” exposure. NOEL (no observed effect level). The dose level at which no treatment-related change was seen. Non-genotoxic carcinogen. damaging DNA.

A chemical which causes cancer without directly

Octanol–water partition coefﬁcient.

See Log P.

452

Select Glossary

OEL (occupational exposure limit). Average airborne concentrations of a chemical to which workers may be exposed over a deﬁned period. Peroxisome proliferation. Increase in the numbers of peroxisomes—cellular organelles having high levels of oxidative enzymes and probably involved in lipid metabolism. This increase is induced by several chemical classes including some hypolipidaemics and plasticizsers such as diethylhexylphthalate, and chlorinated compounds such as trichloroethylene. This proliferation, particularly in the liver of rodents, is associated with nongenotoxic carcinogenesis of little relevance to humans. Pharmacokinetics. The study of the time course of the absorption, distribution, and elimination of a compound from the body. This term usually refers to therapeutic doses; toxicokinetics being used for this in reference to toxicity studies. Phase 1 metabolism. The process whereby molecules are made more polar to facilitate elimination, for instance, by hydroxylation or hydrolysis. This process of detoxiﬁcation may backﬁre when reactive metabolites are produced that result in direct toxicity on cellular macromolecules such as proteins or DNA. Phase 2 metabolism. Conjugation of metabolites from phase 1 with polar endogenous molecules such as glucuronide, glycine, sulphate, or glutathione to produce a more polar molecule that can be readily excreted in the urine or bile. Phase 2 metabolites are usually non-toxic, although there are several exceptions to this general rule of thumb. pK a . The pH at which a molecule is 50% ionized. This affects absorption, particularly across the intestinal mucosa. For example, at low pH, benzoic acid is mostly non-ionized; per cent ionization increases as pH rises above 4, approaching 100 per cent ionized at pH 7. Thus, benzoic acid is best absorbed from low pH media such as those in the stomach. STEL (short-term exposure limit). The upper airborne concentration that is acceptable for short-term exposure (e.g., not longer than 15 minutes, experienced no more than four times in a day, at intervals of not less than 1 hour) without prolonged or unacceptable adverse effect. Subacute toxicity study. Usually, a toxicity study of 28 days or less. Subchronic toxicity study.

Usually, a toxicity study of 13 weeks.

TDI (tolerable daily intake). Used in similar contexts to ADI, for residues and food contaminants. Therapeutic index. A measure of the difference between therapeutic levels or doses of a drug and those that are associated with toxicity. This is often related to the plasma concentration of unbound drug or chemical, as with phenytoin or warfarin (see also dose–response curve).

Select Glossary

453

TLV (threshold limit value). The upper permissible airborne concentration for occupational exposure. TLV-C (threshold limit value-ceiling). An airborne concentration that should not be exceeded at any time. Toxicodynamics. The study of the relationship between concentration at target tissues or plasma and toxic effect. Toxicokinetics. The study of pharmacokinetics in toxicity studies. The knowledge of pharmacokinetics following single or repeated administration may be used to model or explain the effects expected in other species or in humans and may be related to toxicodynamics. TWA (time weighted average). The average concentration to which nearly all workers may be exposed repeatedly without adverse effect, during a working day of 8 hours or a 40-hour week. WEL (Workplace exposure limits). The concentration of a substance that, provided it is not exceeded, will not normally result in adverse effects to persons who are exposed; European equivalent to Occupational Exposure Level (q.v.). See EH40/2005 Workplace exposure limits at http://www.hse.gov.uk/coshh/table1.pdf for recent listing of approved exposure limits in the United Kingdom.

Index

3Rs, in toxicological investigations, 32–35, 78, 95 Abnormality, deﬁned, 38 Abrin, 14 Absorption, distribution, metabolism, and elimination (ADME), of a compound, 131, 216, 225, 242, 246, 267, 298, 301, 308, 328, 340, 342, 348, 353 Acceptability of risk, 329 Acceptable daily intakes (ADI), for consumers, 338, 360 Accidental spillage, as hazard, 374 accumulation of toxicity, 28 2-Acetylaminoﬂuorene, 265, 301–302 Aconitase, 17 Acute inﬂammation, 262–263 ADI, 360 α-Adrenergic antagonists, 126 Adrenal gland Zona fasciculata, 261 Zona reticulata, 261 Aerosols, 351 Aﬂatoxins, 3, 10, 327 Agent Orange, 63 Age of the animals, and toxicity assessment, 133 Age-related analysis, 188 Age-related decline, of organs, 17 Aging, 302 Agrochemicals, 214, 224–226, 419–421 Airborne pollution, 325 Air quality, as risk factor, 325 Alanine, 257 Alizarin red, 157 Alkaline phosphatase (ALP), 138, 147, 240, 257 Alkaloids, 13 Allergic contact dermatitis, 200 Allergic sensitization, 207–209 in guinea pigs, 207–208 in mice, 208–209

Allometric scaling, 344 Allyl isothiocyanate, 10 Alzheimer’s disease, 2 American Conference of Governmental Industrial Hygienists (ACGIH), 360 Ames test, 63, 72, 162–166, 169, 172, 174, 270, 302, 332 Aminotransferases (ALT and AST), 257 Anaemia, 257 Analgesic for headaches, effects of, 8 Anesthesia, 125, 166, 252 Aniline, 10 Animal models for assessment of reproductive toxicity, 150 dermal tests, 205 for ocular irritation studies, 204 for reversibility studies, 141–142 Animal tests, difﬁculties with, 205 Animal welfare legislation, 78 Anorexia, 13 Antibiotic administration, in rats, 254 Antihistamine, 38 Apoptosis, 19, 259–260, 267 Aquatic effect studies, 226 Area under the concentration curve (AUC), 181, 241–242, 245–246, 258 Arochlor 1254, 163 Asbestos delagging and cancer, 372 Asbestosis, 372 Aspergillus ﬂavus, 3, 331 Aspirin, 10 Assessment of exposure, 240–244 Asthma, 372 Atrophy, 261 Autodestructive process, 16 Axons of neurons, 20 Bacillus thuringensis, 13 Bacillus thuringensis DNA, 328 Background lawn, 165 Balkan endemic nephropathy, 9, 231, 334

455

456 Basophilic cells, 264 B6C3F1 mice, 178 Bees, 222 Benchmark dose (BMD), 362–364 Benoxaprofen, 22 Bezaﬁbrate, 284–285 Bilirubin, 22 Bioavailability, in risk analysis, 351–352 Biocides, 421–424 Biocoenoses, 215 Biological markers, 282 Biological signiﬁcance, 236 Biston betularia, 224 Blood supply, changes in, 263 Bouin’s ﬂuid, 140, 157 Buehler test, 207–208 CACO-2 cells, 108 Cadmium, 28 Caenorhabditis elegans, 152 Caffeic acid, 10 CAM test, 206 Cancer, 2, 11, 161–162, 239, 372, 394 Cancer drugs, 330 Carbohydrate storage, 260 Carbon tetrachloride, 134, 261 Carcinogenic dietary constituents, 9 Carcinogenicity, 298 additional means of assessing, 183 bioassays, 47 choice of dose levels, 180–181 data used in risk assessment, 389–390 DNA vulnerability, genotype, and phenotype, 387 epidemiology and background incidence, 387–389 future of, 189–197 general principles, 176–178 interpretation, of toxicological data, 271–274 low dose extrapolation, 392 and markers of effect, 192 parameters, 181–182 pitfalls, 187–189 risk assessment, 385–386 case study, 392–393 and environment, 395–399 scope, 187 study design and methods of assessment, 179–180

Index testing, 109 test systems, 178–179 thresholds in, 390–391 use of transgenic animals, 184–186 Cardiac arrhythmias, 38, 61 Cassava root, 7 Cell death, See Apoptosis Cell organelles, 16 Cellular homeostasis, 20 Cerivastatin, 104 Chemical discharges, 217 Chemicals, toxic, in vegetables, 10 Chernobyl accident, 217 Chimney sweeping and cancer of the scrotum, 372 Chinese hamster cell lines, 168 Chi-squared test, 238 Chlorella vulgaris, 221 Chlorination of drinking water and its impact, 331–332 Chloroquine, 243 Choice of test system, 63–64, 66–70 Cholera epidemic, in Peru, 331 Cholinesterase inhibition, 324–325 Cholinesterases, 143 Chorioallantoic Membrane test, 110 Chromosomal break, 169 Chromosome aberration assay, level of desirable toxicity, 165 Chromosome aberration tests, 169, 172 Ciproﬁbrate, pharmacokinetics of, 283–285, 292 Cisapride, 61, 108 Cisapride metabolism, 12 Clara cells, 21–22 Clearance, (CL), 244, 245, 344, 348 Clinical chemistry, 138, 257–258 Clinical pathology investigations, 137–139 Cloﬁbrate, 284–285 Coagulation, 138 Codeine, 13 Comet assay (test), 175, 303 Communication, of toxicological information, 3 Comparative risk, 330–332 Compound categorization, 379 Computer prediction systems, 104 Confounding factors, 71 Congestion, 263 Contact dermatitis, 201 Contact toxicity, 222 Control groups, as normality, 46–47

Index Controlled exposure, 346 Control of Substances Hazardous to Health (COSHH) regulations, 360, 373– 374 Correct housing, for animals, 71 Corrosion, 199 CORROSITEX, 205 Cosmetic ingredients, testing of, 94–95 Cosmetics, 424–426 Creatine, 257–258 Cyanide, 16 CYP3A4, 108 Cytotoxicity, 165, 169, 270 Daphnia, 222 Daphnia magna, 221–222 Data quality, 338–339 Data selection, for risk assessment, 339–340 Davidson’s ﬂuid, 140 DDE, 243 DDT, 214, 217, 224, 243, 246, 276 Delaney amendment, for food additives, 10, 294, 333 Deleterious effect, 8 DEREK for Windows, 312–313 Dermal exposure, 348 to a chemical, 350 and irritation, 355 Dermal metabolism, 202 Dermal toxicology, 144–145 factors in, 201–203 general principles, 200–201 pitfalls, 209–211 study design and parameters measured dermal irritation and corrosion, 204–206 irritation in the larynx, 207 irritation of the forestomach, 207 occular irritation, 206 tests for sensitization, 207–209 venous irritation, 207 test systems, 203–204 Designer drugs, 3 Diabetes, 2, 330 Dichloroethane, 62 Diclofenac, 315 Diet, in husbandry practices, 49 Dietary administration, of pharmaceuticals, 66 Dietary concentration, 66 Dietary imbalance risks, 325 Diethanolamine, 221

457 Diethylhexylphthalate (DEHP), 300, 355 Diethylstilbestrol, 18, 38 Digitalis, 12, 15 Digoxin, 13 Diltiazem, 13 Dilution, of a substance and toxicity, 351 Dimethyl sulphoxide, 64 Dioxins, 3 D-limonene, 10 DNA-adduct analysis, 281 DNA methylation, 193 DNA or chromosomal damage, detection of, 163 Dogs, 47, 70, 127, 136 Dose level, calculation, 66 Dose level choice, in carcinogenicity, 188 Dose per patient, 226 Dose response, in risk analysis, 352 Dose–response curve, 247 Drosophila, 151, 300 Drosophila melanogaster, 166 E. coli, 168 Earthworms, 222 Eberus papyrus, 3 Ebola, 133 Ecological structure activity relationships (ECOSAR), 313 Ecotoxicology, 110–111, See also Environment assessment Effects sought, in toxicity studies, 61 Electrocardiograms (ECG) examinations, 145 Electroencephalography, 143 Electrolytes, 138 Embryofetal examinations, 158 Embryonic development, 157–158 Embryonic stem cell test, 152 Enantiomers, 119 Endogenous plant chemicals, 333 Endogenous substances, toxic effect of, 2 Endorphins, in athletes, 2, 13 Environmental enrichment, 44 Environmental risks, 14 Environment assessment, 214–226 of agrochemicals, 224–226 factors in testing, 219–220 general principle, 215–216 international management of risk, 399 interpretation, of toxicological data, 273–282 objective of ecotoxicity testing, 219 of pharmaceuticals, 226–227

458 Environment assessment (cont.) pitfalls, 227–228 pollution, 216–218 processes of ADME (absorption, distribution, metabolism, and elimination), 216–218 relevance, 214–215 routes of entry of pollutant, 216–218 test systems for assessment of ecotoxicology, 220–224 Eosinophilia-myalgia syndrome, 240–241 Epidemiological study, of toxicology, 278–281 Erythema, 205 Erythrocyte parameters, 138 Erythropoiesis, 257 Ethanol, 64 Ethinyl estradiol, OEL for, 365 European Centre for the Validation of Alternative Methods (ECVAM), 205 European Medicines Agency (EMEA), 366 European Union Estimation and Assessment for Substance Model (EASE), 376 European Union System for the Evaluation of Substances (EUSES), 376 Exercise-induced euphoria (runner’s high), 13 Exfoliation, 205 Experimental groups, in normality, 48–51 Expert systems, for hazard prediction, 305– 314 criteria for success, 306–309 deﬁning, 305–306 prediction, validity and accuracy, 310–314 strengths and weaknesses, 309–310 Exposure assessments, 346, 348–349 data integration of, 241–242 limits, 358–360 monitoring, 382–383 prediction, 346–348 principles, 347 of the test system, 74–76, 268 Expression, of toxicity, 22–24 diet and nutrition, 23–24 disease, 22–23 genetics, 23 metabolism, 22 occupation, 24 pregnancy, 23 Extended testing, 143 Extrapolation, of pharmacokinetic parameters, 343

Index Factories Acts and regulations, 373 Farmer’s lung, 372 Fat accumulation, 260 Ferrets, 133 Fertilized chicken eggs, CAM of, 206 Fetal alcohol syndrome, 38, 279 Fibrosis, 142 Fibrotic repair, 264 Field tests, 223 Fisher’s exact test, 238–239 Fluorocitrate, 17 Formalin, 140 Formulation, in risk analysis, 350–351 Foxglove, 12–13 Frameshift mutation, 163 F344 rats, 178 Freund’s adjuvant, 207 Fugu ﬁsh, 7 Functional reserve, in organs, 262 Functional toxicity testing, 107 Furfural, 333 Furosemide, 15, 252 Fusarium solani, 21 Gaian concept, 216 Gametogenesis, 148 Gemﬁbrozil, 104 General toxicology, 216, 298 age and sexual maturity, issues with, 146 interpretation of data, 253–258 investigation of toxicities, 142–145 pitfalls in, 145–147 study designs in, 134–142 test species, 132–133 test systems for, 131–134 Genetically modiﬁed foods, 328–329 Genetically modiﬁed potatoes, toxicological study of, 285–287 Genetic disorders, 161 Genetic homogeneity, 68 Genetic proﬁle, as risk factor, 323 Genomics, 102, 195 Genotoxicity studies, 63, 183, 295, 298 doses in animals, 165 exposure, 165 interpretation, of toxicological data, 267–271 pitfalls, 172–173 principles in, 161–163 sensitivity and speciﬁcity, 173–176 test battery and study design, 163–166

Index test systems and tests bacteria, 167–168 ex vivo systems, 170 mammalian cells in culture, 168–170 in vivo systems, 170–171 Genotoxicity tests, 96 Gentamycin, 15 Gingko, 7 Ginseng, 7 Globally Harmonised System of Classiﬁcation and Labelling of Chemicals (GHS), 373 α2␮-Globulin nephropathy, 300–301 Glutathione (GSH), 17, 22 Good laboratory practice (GLP), 72, 299 basic elements of, 81 data protection, 86 facilities and equipment, 83 facility management, 81–82 penalties for non-aherence, 86 quality assurance, 82 raw data, 85 report of study, 85–86 standard operating procedures (SOPs), 82–83 study director and study personnel, 83–84 study plan, 84 test item and test system, 84–85 Good manufacturing practice (GMP), 63 Growth inhibition, 152 Guinea pig, 204 Gulf War Syndrome, 324 Haematology, 138 Haloperidol, 117 Hazard prediction, 292–317 characterization, 292 circumstances, 293 computer models, 305–314 database for, 298 data handling, 299–300 expert systems, 305–314 factors for consideration, 300–304 for individuals, 315 from minimal databases, 304–305 preliminary questions in, 296–297 principles, 294–295 quality and composition, 297 steps, 296–300 summary for successful prediction, 316–317 of toxicity in paracetamol, 316

459 vs risk, 292–293 Health and Safety at Work Act, 373 Health and Safety Executive (HSE), 374 Hemangiosarcoma, 38 Hemolytic anaemia, 266 Hemosiderin, 261 Hemosiderin deposition, in the liver, 266 Hepatic hemangiosarcoma, 279 Hepatic marker enzymes, 120 Hepatocytes, 94, 99, 169–170 Hepatocytic hypertrophy, 16 Herbal remedies, toxicities of, 11–14 HERG channel block, 253 HERG inhibition assay, 124–125 Historical control data, 50–53 Hormonal disturbance, 149 Hormonal levels, examination of, 183 Human embryogenesis, 148 Human peripheral lymphocytes, 169 Husbandry and normality, 42–43 Hyaline deposits, 261 Hydrazines, 10 4-Hydrazinobenzoic acid, 294, 305 Hyperplasia, 11, 17, 262 Hypertrophy, 236, 255, 261 Hypolipidemic ﬁbrates, 17 ICH guidelines ICH S7a (2), 116–118 ICH S7b, 123 ICH S6 (3), 119 ICH S7a, 119 Immunosuppression, 183 Immunotoxicity, 142–143 Impurities, test substance, 62–63 Inﬂammation, 262–263 In-life observations, 136–137, 140 Internal dose, 75 Interpretation, of toxicological data, 229–249 assessment of exposure, 240–244 atrophy, 261 blood supply, 263 carcinogenicity, 271–273 case studies, 282–287 cell death, 259 challenges, 230 changes to whole tissues or organs, 262 clinical chemistry and urinalysis, 257–258 clinical pathology, 256 complexity of, 230

460 Interpretation, of toxicological data (cont.) composition of the cytoplasm or cell contents, 260–261 confounding factors, 234 controls and expectations, 232–233 as a dynamic process, 231 in environmental toxicology and ecotoxicology, 273–282 fundamentals of, 287–288 general toxicology, 253–256, 266 in genotoxicity, 267–271 hematology, 257 historical control parameters, 234 hyperplasia, 262 hypertrophy, 261 individual data set, 251–252 inﬂammation, 262–263 morphological pathology, 258–266 neoplasia, 265–266 plasma membrane changes, 261 questions in, 249 repair and reversibility, 264–265 reproducability of difference, 248–249 in reproductive toxicology, 266–267 safety pharmacology, 252–253 scope of, 230 of small differences, 246–248 steps, 231–233 study design, 231–232 subcellular organelles, 259–260 toxicokinetics, 244–246 use of background data, 233–234 use of statistics, 234–240 validity of the data, 233 variability in data, 238 Intranasal administration, 144 Intravenous injection, of a test substance, 75 In vitro chromosomal aberration tests, 271 In vitro Membrane Barrier Test Method for Skin Corrosion, 205 In vitro photoirritation tests, 97 In vitro test systems, 66–70, 72, 75, 162, 170, 172, 195, 203–204, 222, 303, 442–443 In vitro toxicology areas of use, 94–95 carcinogenicity, 109 considerations in screening program design, 93–94 decision to use, 92–93 development considerations, 95–96 ecotoxicological evaluation, 110–111

Index future of, 111–112 irritation and corrosion, 110 kinetics, 108 in metabolism, 108 pharmacology and safety pharmacology, 107–108 phototoxicity, 110 pitfalls in, 111 rationale for, 90–92 reproductive toxicity, 109–110 of sensitization, 210 strengths and weaknesses, 90–91 test systems and endpoints, 98–101 toxicity testing, 109 validation of, 96–98 vs in vivo toxicology, 91 In vivo cardiovascular studies, 125–126 In vivo test systems, 66–70, 170–172 4-Ipomeanol, 21, 27 Irritation, 199 Irritation analysis, 110 Isoniazid, 16 Ivermectin, 214 Joint FAO/WHO Expert Committee on Food Additives (JECFA), 366 Ketoconazole, 108 Kidney, of a young adult, 10, 15–21 Kidney functions, 138 Kruskal–Wallis test, 238 Lactate dehydrogenase, 41, 138, 204, 258 LAL test, 111 Lamotrigine, 292–293 Langerhans cell, 201 LC50, 220 LD50 test, 79, 134, 306, 311 Lead, 24–25 Learning ability, 158 Lectins, 14, 286 Leucine aminopeptidase, 139 Leukocyte parameters, 138 Limit setting, 385 Limulus amebocyte lysate test, 78 Lipid content of diet, 24 Lipids in body, 149 Lipofuscin, 261 Lipophilicity, 203 Liver functions, 138

Index Liver toxicity, 254 Lowest observed adverse effect level (LOAEL), 350, 356 Lung cancer, 9 Macroscopic appearance, 140 Magnusson-Kligman test, 210 Mann–Whitney test, 238 Marburg, 133 Margin of exposure (MOE), 364 Marine mammalian toxicology, 218 Marmosets, 139, 147 Maternal toxicity, 267 Mathematical models, 344 Mating performance, assessment of, 158 Maximum dose, 120 Maximum lengths, of toxicity study, 74 Maximum tolerated dose level (MTD), 72, 180–181, 189, 311 Measurements, in toxicology, 3–6 Mesocosm, 223 Mesocosm tests, 275 Metabolism, 181 Metabolism, analysis, 108 Methylene chloride and cancer, 394 and risk assessment, 402 Mice, 5–6, 11, 23, 31–33, 43, 55, 61, 64, 68, 71, 84, 108, 122, 132, 143, 166, 171, 176, 180, 187–188, 203–204, 265, 283, 294, 300, 333, 343, 389–390, 394, 437 Micromass test, 152 Micronucleus test, in rodents, 165 Microscopic appearance, 140 Minipig, 43, 67–68, 108, 132–133, 144, 149–151, 154–155, 159, 263 Modiﬁed Irwin Screen, 122–123, 128, 252 Mold-preventing chemicals, 3 Monkeys, 70, 108, 134, 147, 255 Morphine, 13 Morphological (postmortem) pathology, 256 Mouse, 150 Mouse Ear Swelling Test, 47 Mouse lymphoma L5178Y cell, 168 Mouse lymphoma L5178Y TK assay, 164 Multigeneration studies, 158 Murine local lymph node assay (LLNA), 204, 207–210 Mushrooms, 9, 333

461 N-acetyl glucosaminidase, 258 N-acetyl-␤-glucosaminidase, 138 N-acetyl-p-benzoquinone imine, 17 β-naphthoﬂavone, 163 β-naphthylamine, 372 Natural, deﬁned, 37 Nausea, 8 Necrosis, 19, 205, 260 Neonatal mouse model, 186 Neoplasia, 265–266 Neoteny, concept of, 344 Neurotoxicity, 143–144 NHPs, 151 N-hydroxyacetylaminoﬂuorene, 301 N-hydroxylation, 301 Nifedipine, 13 Nongenotoxic carcinogenicity, in animals, 11 Nonsensitive people, 374 No observed adverse effect level (NOAEL), 134, 247–248, 339–340, 356, 360–362 No observed effect concentration (NOEC), 220, 226–227 Normality, 37–57 age-related decline, 40 of baseline data, 50 comparability of the data sets, 55–57 control groups as, 46–47 deﬁnition, 37–41 deviation from, 37 drift in, 52–55 experimental, 41–45 in experimental groups, 48–51 for historical control data, 50–51 and husbandry practices, 44–46 and judgment, 40 normal range, deﬁned, 51–52 and procedure-related effects, 44 and protocol design and procedure, 45–46 as a range, 41 Occlusion, of the application site, 145 Occupational disease, 372 Occupational exposure bands, 364 Occupational exposure limits (OELs), 377 Occupational risks, 323 Occupational toxicology, 24, 281–282 Ochratoxin, 9 Ocular irritation studies, 110, 204, 206 Oedema, 205

462 Oil-red-O, 140–141 Old substances, 340 Omeprazole, 284 Open ﬁeld test, 158 Ophthalmoscopic examinations, 143 Opium, 13 Oral toxicity, 222 Organic produce, 331 Organisation for Economic Co-operation and Development (OECD), 203, 205, 208, 373, 409 Organochlorine insecticides, 246 Organochlorine pesticides, 220 Organochlorines, 149 Organophosphates (OP), 144, 323–324 Organ weights, 139–140 Over-conservative assessment, 374 P53, impaired function of, 175 Paracelsus’s dictum, 285 Paracetamol (acetaminophen), 8, 17–18, 23–24, 316 Paraquat, 20–21, 27–28 PEC for surface water, 226 Perception of risk, 325–327 Peroxisome proliferators, 273, 283 Personal protection equipment (PPE), 374 Pesticides, 14, 34, 60, 215, 225, 334 P450 family, 255 Pharmaceuticals, 215, 226–227, 355, 376 human, 411–415 medical devices, 416–419 veterinary, 415–416 Pharmacokinetic (PBPK) modeling, 342–344 Pharmacokinetics, 181, 273 Pharmacological QSAR screening, 314 Phenylketonuria, 38 Phenytoin, 15, 22, 24 Phocomelia, 38 Photoallergy, 201 Photocarcinogenicity protocols, 272 Photocarcinogenicity study, 180 Phototoxicity, 110, 201 Physical form, in risk analysis, 350–351 Physicochemical characteristics, of the test substance, 63 Pigment deposits, 266 Pituitary tumours in rats, 254 Plant protection products, 419–421

Index Plasma concentrations of albumin, 149 P53+/– model, 186 Pneumoconiosis, 372 Pollution, deﬁned, 216 Polychlorinated biphenyls, 218 Polychromatic (early stage) erythrocytes to normochromatic (late stage) erythrocytes (PCE :NCE) ratio, 171 Postmortem examinations, 139–141 Potatoes, 14, 285–287, 333 Predicted environmental concentrations (PECs), 225 Pregnancy, 148–149 Pregnant animals, for reproductive studies, 155 Preimplantation losses, 157 Preyer’s reﬂex, 143 Primary pharmacodynamics, 115 Principles, in toxicity testing, 62–86 choice of carrying system and route of administration, 63–66 choice of dose level, 72–74 choice of test system, 66–70 duration of treatment, 74 effects sought in the studies, 61 good laboratory practice (GLP), 80–86 objectives, 61–62 quality and characteristics of the test substance, 62–63 reasons for testing, 59–61 regulatory framework and inﬂuences, 77–80 study design basics and confounding factors, 70–72 toxicokinetics, 74–76 design, 76–77 Programmed cell death, See Apoptosis Proteomics, 102, 195 Psoralen and UVA (PUVA) therapy, 110, 201 Psoralens, 10 Psoriasis, 201 Public perception, of toxicity, 2 Purkinje ﬁbers, 94, 101, 121, 125 QT intervals, 93, 116, 123–124, 253, 256 Quality Assurance Unit (QAU), 81–83 Quality of the test substance, 63 Quantitative structure activity relationship (QSAR), 104, 183, 206, 306, 313, 429–431

Index Rabbit, 133, 150, 153–154, 159, 204 Rabies, 133 Range, for normality, 51–52 Rats, 150, 154–155, 159 REACH, See Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) Read across, 340 Red kidney beans, 7, 333 Reduced growth and food consumption, 254 Reﬁnement of techniques, 78 Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), 110, 210, 213–214, 313, 338, 340, 426–431 Regulations and standards, in chemical testing, 409–411 Regulatory toxicology, 62 Renaissance Italy, 4 Renal toxicity, 254 Repair capability, 26 Replacement, of a toxic chemical, 330 Reproductive function, 158 Reproductive toxicology, 109–110, 298 duration of treatment, 153 general principles, 147–149 interpretation of data, 266–267 in vitro systems, 151–152 in other studies, 153 pitfalls in, 158–159 premating treatment in fertility studies, 154 study designs, 153–158 test systems, 149–151 Respiratory toxicology, 144 Retinoids, 92 Reversibility, of any toxicity, 141 Ricin, 20 Risk acceptability, 329 Risk analysis, 291 challenges, 437 communication of, 403 data quality, 338–339 data selection for, 339–340 dose level selection, 360–364 evolution of, 399–401 exposure limits, 358–360, 364–365 factors affecting risk, 323–335 factors considered bioavailability, 351–352 dose response, 352 physical form and formulation, 350–351

463 purpose and target population, 354–356 route of exposure, 351 safety evaluation and human data, 352–354 future of, 435–436 inﬂuencing factors, 437–439 overview, 319–322 personal levels, 323 as a process, 338 process and factors in, 349–356 safety factors and margins, 356–358 single effect vs general risk assessment, 341–342 target population, dose and exposure, 345–349 in terms of probability of occurrence, 326 threshold of toxicological concern (TTC), 365–368 tools and models in, 342–345 use of animal models in, 439–440 use of the, 402 Risk appreciation, 326 Risk/beneﬁt ratio, 329 Risk expression and quantiﬁcation, 334–335 Risk perception, 325–327 River of reproduction, 147 Rodent bioassays, 344–345 Rodent carcinogens, 10, 176 Rodenticide ﬂuoroacetate, 17 Route of administration, 64, 252 Route of exposure, in risk analysis, 351 Routine toxicity studies, 71, 183 S. typhimurium, 168 Safety assessment, 9, 352–354 Safety evaluation and human data, in risk analysis, 352–354, 443–444 Safety pharmacology, 298 core battery of tests, 118–119 general principles, 116–117 identity of the compound to be tested, 119 interpretation of data, 252–253 pitfalls in studies of, 128–129 purpose, 116 studies for cardiovascular system, 123–126 central nervous system—Modiﬁed Irwin Screen, 122–123 GI tract, 127–128 renal functions, 128

464 Safety pharmacology (cont.) respiratory system, 126–127 study design, 119–121 tests to be conducted, 117–118 test systems for, 121 in toxicity studies, 121–122 Salmonella, 167 Salmonella typhimurium, 41, 162 Salt intake risk, 323 Scientiﬁc justiﬁcation, 68 Screening, objectives of, 92 “Screening Information Data Set” (SIDS) program, 373 Secondary pharmacodynamics, 115 Sedatives, 126 Senses, assessment of the, 143 Sensitization, 200 Sexually mature control group, 146 Silicosis, 372 Single-species testing, 222 Sister chromatid exchange (SCE) test, 170–171 Skewed analysis, 240 Skin, cracking, 205 Skin cancer xeroderma pigmentosum, 196 Skin diseases, 372 Skin ﬁssuring, 205 Skin sensitization and hypersensitivity, 298 Skin thickening, 205 Skin toxicity, 201 Skin tumours, 181 S9 mix, 168–169 Smoking behavior, as risk factor, 323 Sodium lauryl sulphate, 210 Sodium phenobarbitone, 163 Solvent-induced neuropathies, 372 Spanish toxic oil syndrome, 240 Spermatogenesis, 146, 157, 266 Sprague–Dawley CD, 178 Sprague–Dawley rats, 182 Standard operating procedures (SOPs), 82–83 Statistical analysis, 235–240 Statistical signiﬁcance, 235 Stress, in animal studies, 42–43 Structure activity relationship (SAR), 104, 183, 306, 429, 431 Student’s t test, 238 Surrogate animal models, 218 Synthetic chemicals, risk with, 331–333 Synthetic chemicals, toxicity, 8 target organ, expression of toxicity, 25–29

Index accumulation, 28 blood supply, 25 cell turnover, 26 hormonal control, 27–28 in vitro method immune system, 106 kidney, 105 liver, 105 nervous system, 105–106 other organs, 106–107 morphology, 27 oxidative exposure, 26 physiology, 27 processing ability, 27 protection mechanisms, 28–29 repair ability and reversibility, 26 Target population, in risk analysis, 354–356 TDI, 360 Terfenadine, 38 Testicular atrophy, 133, 149 Testicular staging, 153 Testicular weight, 157 Test system, choice of, 63–64, 66–70 Tetrachlorodibenzo-p-dioxin (TCDD), acute toxicity, 5, 7, 25, 28, 63, 272, 292, 300, 397, 399, 401 Tg.AC model, 186 Tg.rasH2 model, 186 Thalidomide, 18, 63 disaster, 38, 61, 78, 148–149 OEL for, 365 Threshold of toxicological concern (TTC), 365–368 Thymic atrophy, 261 Thyroid change, 254 Thyroid hormones, 255, 283 Thyroxine, 255, 283 Tissue slices, 100 3T3 NRU PT test, 110 Tolerable daily in take (TDI), 360 Toxic chemicals, in vegetables, 10 Toxicity, 7–9, 22–29 deﬁned, 7–9 expressions diet and nutrition, 23–24 disease, 22–23 genetics, 23 metabolism, 22 occupation, 24 pregnancy, 23 public perception, 2

Index target organ, expression of toxicity accumulation, 28 blood supply, 25 cell turnover, 26 hormonal control, 27–28 morphology, 27 oxidative exposure, 26 physiology, 27 processing ability, 27 protection mechanisms, 28–29 repair ability and reversibility, 26 Toxicity in silico techniques, 101–103, 443 Toxicity test package, 411 Toxic oil syndrome, 240 Toxicokinetic Parameters, 245 Toxicokinetic sampling, in nonrodents, 146 Toxicological signiﬁcance, 236 Toxicology, 2–9, 14–18, 29–35 assessment ethics of, 30–33 modern techniques, 32–35 need for, 29–30 new test protocols, 440–441 cellular basis and consequences of toxic change, 18–22 challenges, 436–437 deﬁned, 7–9 determination of toxicity, 6 as discipline, 2 and dose-relationships, 4 and food preservation, 3 general objectives, 14–16 nature and outcome of toxic reactions, 16–18 need for assessment, 29–30 role of endogenous chemicals, 2 safety as a concept, 4–5 strong vs weak toxicants, 5–7 Traditional medicines, See Herbal remedies, toxicities of Tranquilizers, 126 Transdermal absorption, 203 Transgenic animals, in carcinogenicity, 184–186 Transgenic materials, 13 Transgenic mice, 171 Transplacental carcinogenesis, 159 Treatment-free periods, 141 Trigonometric functions, 240 Triiodothyronine, 255

465 Tumors, benign vs malignant, 265 Tumour data, 236 Tumour incidence, calculation of, 54 α2u-globulin, 11 Ulceration, 205 Unscheduled DNA synthesis (UDS), 163–164, 172, 270 Uranium miners, 293 Urinalysis, 139, 257–258 U.S. National Toxicology Program, 308 US Occupational Safety and Health Administration (OSHA), 360 Vacuolation, 260 Validation, 68, 95–98, 110–112, 166, 310–313 Vehicles or carrier systems, 64–65, 144, 252 Verapamil, 13 Very obvious test, 237 Veterinary pharmaceuticals, 227 Vibrio ﬁscheri, 221 Vigabatrin, 119 Visceral development, 157 Vomiting, 8 Warfarin, 15, 22, 331–332 WEL/OEL, 359–360 Wilcoxon rank sum, 238 Wildlife, toxicity to, assessment, 225 Wilson’s sectioning of foetuses, 157 Wistar rats, 178 Workplace exposure limit (WEL), 375, 377 Workplace risk assessment, 373–383 classiﬁcation and exposure limits, 373–374 exposure assessment, 375–377 factors in, 374 historical and regulatory background, 372–373 process, 375 risk management, 377–383 useful information for, 374 WP2 uvrA, 168 Xenobiotics, 2, 13, 224, 260 Xenopus, 221 Xenopus laevis, 107, 111–112 XPA–/– and XPA–/– or p53+/– models, 186 Zymbal’s gland, 265

117975-Woolley