atlas of minimal invasive hand and wrist surgery

Atlas of Minimally Invasive Hand and Wrist Surgery Atlas of Minimally Invasive Hand and Wrist Surgery Edited by John...

Author: T. Capo John | Virak Tan

314 downloads 1561 Views 74MB Size Report

This content was uploaded by our users and we assume good faith they have the permission to share this book. If you own the copyright to this book and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Start by pressing the button below!

Report copyright / DMCA form

DOWNLOAD PDF

Atlas of Minimally Invasive Hand and Wrist Surgery

Atlas of Minimally Invasive Hand and Wrist Surgery Edited by

John T. Capo

New Jersey Medical School Newark, New Jersey, USA

Virak Tan

New Jersey Medical School Newark, New Jersey, USA

Informa Healthcare USA, Inc. 52 Vanderbilt Avenue New York, NY 10017 q 2008 by Informa Healthcare USA, Inc. Informa Healthcare is an Informa business No claim to original U.S. Government works Printed in the United States of America on acid-free paper 10 9 8 7 6 5 4 3 2 1 International Standard Book Number-10: 0-8493-7014-0 (Hardcover) International Standard Book Number-13: 978-0-8493-7014-4 (Hardcover) This book contains information obtained from authentic and highly regarded sources. Reprinted material is quoted with permission, and sources are indicated. A wide variety of references are listed. Reasonable efforts have been made to publish reliable data and information, but the author and the publisher cannot assume responsibility for the validity of all materials or for the consequence of their use. No part of this book may be reprinted, reproduced, transmitted, or utilized in any form by any electronic, mechanical, or other means, now known or hereafter invented, including photocopying, microﬁlming, and recording, or in any information storage or retrieval system, without written permission from the publishers. For permission to photocopy or use material electronically from this work, please access www.copyright.com (http://www.copyright.com/) or contact the Copyright Clearance Center, Inc. (CCC) 222 Rosewood Drive, Danvers, MA 01923, 978-750-8400. CCC is a not-for-proﬁt organization that provides licenses and registration for a variety of users. For organizations that have been granted a photocopy license by the CCC, a separate system of payment has been arranged. Trademark Notice: Product or corporate names may be trademarks or registered trademarks, and are used only for identiﬁcation and explanation without intent to infringe. Library of Congress Cataloging-in-Publication Data Atlas of minimally invasive hand and wrist surgery / edited by John T. Capo, Virak Tan. p. ; cm. – (Minimally invasive procedures in orthopedic surgery ; 4) Includes bibliographical references and index. ISBN-13: 978-0-8493-7014-4 (hardcover : alk. paper) ISBN-10: 0-8493-7014-0 (hardcover : alk. paper) 1. Hand–Endoscopic surgery–Atlases. 2. Wrist–Endoscopic surgery–Atlases. I. Capo, John T. II. Tan, Virak. III. Series. [DNLM: 1. Hand–surgery. 2. Orthopedic Procedures–methods. 3. Surgical Procedures, Minimally Invasive–methods. 4. Wrist–surgery. WE 830 A881 2007] RD559.A85 2007 617.5’750597–dc22 2007020672 Visit the Informa Web site at www.informa.com and the Informa Healthcare Web site at www.informahealthcare.com

Foreword

Valuable medical reference books fall generally into one of two categories—authoritative, breakthrough information about new scientiﬁc, technical, or technological developments; or comprehensive, generally accepted, factual information on a particular subject. This textbook is a commendable example of the former. This useful book will serve the reader well as a reference for the execution of many of the newest techniques in hand and wrist surgery. It includes well-organized chapters on the developments in minimally invasive procedures that can reduce the risks and inconveniences patients face in the surgical treatment of certain traumatic and degenerative disorders of the upper extremity. The references of these chapters will also stimulate additional reading of authoritative articles in the medical literature. Orthopedic surgery—and hand surgery, in particular—has evolved into a specialty with brilliant potential based on advantageous new technologies, implants, and task-speciﬁc instruments. Technically assisted visualization, enhanced with the arthroscope, the intra-operative use of C-arm X-ray, and more extensive use of pre-operative magnetic resonance imaging, is discussed in great detail in this text. The pros and cons of various implant materials are reviewed with critical assessment. There is an enlightening chapter on the chemistry of osteo-inductive ceramic bone substitutes as they are becoming not only commonplace, but the mainstay for ﬁlling bone voids, replacing biologic bone graft tissues. Extensive attention is devoted to internal ﬁxation of small bone and distal radius fractures. Included are comparative biomechanical assessments of cannulated and compressive orthopedic screws, as well as the surgical details for their implantation. These ﬁxation devices are used commonly today for acute fractures, nonunions and fusions of the small joints of the hand and wrist. Additionally, the rationale and techniques for minimally invasive fracture stabilization with external ﬁxators and internal ﬁxators, as well as the newer conceptual developments of extra-osseous and even intra-osseous nail plates and bridge plates, are discussed with superb illustrations and technical precautions. New minimally invasive approaches to the treatment of common soft tissue problems are addressed with a background of extensive experience and a particular interest in patient safety. Included are compressive and entrapment disorders of peripheral nerves and tendons, and even minimally invasive approaches to Dupuytren’s contractures and tendon sheath infections. Although many minimally invasive surgical techniques are included for thoroughness, they do not uniformly represent the endorsement or recommendation of the authors. Accordingly, this text provides invaluable commentary on the pros and cons of each surgical technique and implant discussed, enabling readers to exercise their own judgment in the care of their patients. In summary, as the advantages of minimally invasive and less traumatic surgical techniques gain more widespread acceptance, Minimally Invasive Hand and Wrist Surgery provides a concise resource for most new developments in the treatment of bone and joint problems in the distal upper extremity. It is a pleasure to commend the exceptional efforts that have gone into the organization, preparation, and illustration of this textbook. I am conﬁdent it will be an informative reference for hand surgeons well into the foreseeable future. Terry L. Whipple American Self, PLC, and Orthopaedic Research of Virginia, Richmond, Virginia, U.S.A.

Preface

When we were ﬁrst approached to assemble this volume on minimally invasive techniques in the wrist and hand, we were unsure whether enough novel and valuable material existed to merit a book. However, in putting together a rough outline, we easily came up with over 40 chapters. This told us something about the evolution of hand and wrist surgery over the last several years. The surgeon leaders in the ﬁeld have been motivated to improve upon existing operations in many ways. Signiﬁcant advances have been achieved by making the surgical experience more appealing to the patient by developing procedures that are less invasive with smaller incisions and shorter rehabilitation times. This work has been largely motivated by forces in society at large, with patients expecting a better aesthetic result, less morbidity, and an earlier return to function. This, of course, must be coupled with proper treatment of the pathology and equal or better technical results than the traditional open techniques. The focus of the text, Minimally Invasive Hand and Wrist Surgery, is to describe many of these new and exciting techniques for treatment of traumatic and chronic conditions in the hand and wrist. Technology has advanced signiﬁcantly over the last 10 years, and several new surgical methods have been developed that utilize percutaneous and minimally invasive techniques. These include percutaneous screw ﬁxation for scaphoid nonunions that obviates the need for a large incision at the wrist, and also eliminates the often troublesome bone graft exposure at the iliac crest. These new methods have been developed primarily by hand surgeons, but also with signiﬁcant input from the sports medicine and arthroscopic subspecialty trained surgeons. New developments in arthroscopy have expanded the indications within the wrist joint and also extended the applicability to other smaller joints, such as the thumb basal joint. These advances are resulting in improved outcomes with higher patient satisfaction and earlier return to functional activities. No book currently exists that contains these techniques and concepts all in one volume. A few can be found in various large surgical texts, and others have only been published as journal articles. We have striven for this volume to contain the true current “state-of-the-art” techniques, so many of these procedures may have not appeared before in print. The time from manuscript submission to publication has been consciously accelerated to get these new techniques to you as quickly as possible. We hope that the compilation of this information into one concise volume adds signiﬁcantly to the orthopedic literature. The text was designed to serve both as a reference atlas and a work that may be read a section at a time. The reader should be able to turn to a surgical technique section and ﬁrmly grasp how to do a speciﬁc procedure in 5 to 10 minutes. The chapters have been assembled in a consistent format throughout the text. The “Introduction” is meant to be brief and to describe the motivation for and evolution of the minimally invasive technique. Within the “Indications” section, authors describe how the technique differs from and improves upon the similar open procedure. The surgical technique is really a “how to” section with step-by-step instructions and accompanying photographs and ﬁgures. The outcomes described are published series (when available) for the speciﬁc and similar techniques and often contain the authors’ personal patient series. Unpublished work and data that were presented only at national meetings are also included to be as complete and accurate as possible. Finally, we asked all authors to include a bulleted summary section to clearly deﬁne the advantages, risks, and beneﬁts of these new and often technically demanding techniques. We would like to thank the many authors who contributed to this work for taking time from their busy schedules to add “another book chapter” to their long lists of accomplishments. Many of these “giants” of hand surgery have taught us many things through the years and have been inspirational with their teaching and leadership. We hope that this volume adds something unique and of signiﬁcance to the world of hand and wrist surgery. John T. Capo Virak Tan

Contents

Foreword

Terry L. Whipple

Preface

v

Contributors

PART I:

iii

xi

INTRODUCTION

1. Technical Considerations and Anatomical Basis for Minimally Invasive Hand Surgery Virak Tan and John T. Capo

1

PART II: BASIC TECHNIQUES 2. Use of Suture Anchors in Hand Surgery Aaron Daluiski and Virak Tan

5

3. The Role of Bone Graft Substitutes in Minimally Invasive Surgery of the Wrist and Hand 11 Vikrant Azad, Ankur Gandhi, Frank Liporace, and Sheldon Lin

4. Bioabsorbable Implants in Hand and Wrist Surgery Mark L. Kavanagh, Regis L. Renard, and John T. Capo

19

5. Use of Cannulated Screws in Hand and Wrist Surgery Drew Engles

29

PART III: MINIMALLY INVASIVE TECHNIQUES IN THE PHALANGES AND METACARPALS 6. Percutaneous Pinning of Phalangeal and Metacarpal Fractures Yi-Meng Yen and Roy A. Meals

37

7. Percutaneous Mini Screw Fixation of Phalangeal and Metacarpal Fractures Alan E. Freeland and William B. Geissler

8. Intramedullary Rodding of Metacarpal and Phalangeal Fractures Jorge L. Orbay, Amel Touhami, and Igon Indriago

9. Hinged Fixation and Dynamic Traction of PIP Fracture Dislocations Kenneth R. Means, Jr., James P. Higgins, and Thomas J. Graham

45

55 63

10. External Fixation of the Metacarpals and Phalanges and Distraction Osteogenesis Bruce A. Monaghan

11. Percutaneous Release of the Post-traumatic Finger Joint Contracture: A New Technique 83 Joseph F. Slade III and Thomas J. Gillon

PART IV: MINIMALLY INVASIVE PROCEDURES OF THE CARPUS 12. Percutaneous Scaphoid Fixation via a Dorsal Technique Joseph F. Slade III and Greg Merrell

89

73

viii & Contents

13. Percutaneous Fixation of Acute Scaphoid Fractures John T. Capo, Tosca Kinchelow, and Virak Tan

95

14. Percutaneous and Arthroscopic Management of Scaphoid Nonunions William B. Geissler

105

15. Reduction and Association of the Scaphoid and Lunate (RASL) Reconstruction for Scapholunate Instability 117 Steven H. Goldberg, Charles M. Jobin, and Melvin P. Rosenwasser

16. Prosthetic Arthroplasty of Proximal Pole Scaphoid Nonunions

125

Christophe L. Mathoulin

PART V: MINIMALLY INVASIVE PROCEDURES FOR DISTAL RADIUS FRACTURE FIXATION 17. Augmented External Fixation for Distal Radius Fractures

133

John T. Capo, Kenneth G. Swan, Jr., and Virak Tan

18. Non-Bridging External Fixation of the Distal Radius Margaret M. McQueen

143

19. Spanning Plating for Distal Radius Fractures

151 Anthony J. Lauder, David S. Ruch, and Douglas P. Hanel

20. Minimally Invasive Treatment of Distal Radius Fractures with the MICRONAIL

161

Virak Tan and John T. Capo

21. Dorsal Nail Plate Fixation for Distal Radius Fractures Jorge L. Orbay and Amel Touhami

167

22. Balloon Reduction and Grafting of Distal Radius Fractures Jose´ M. Nolla and Jesse B. Jupiter

175

23. Limited Approach Open Reduction and Internal Fixation of Distal Radius Fractures 181 Jose´ M. Nolla and Jesse B. Jupiter

24. Repair of Distal Radial Malunions with an Intramedullary Nail John T. Capo, Damon Ng, and Virak Tan

25. Repair of Distal Radial Malunion with Volar Plating David A. Fuller

PART VI(A): WRIST AND HAND ARTHROSCOPY

191

203

TRAUMATIC

26. Surgical Setup and Intra-articular Anatomy David J. Bozentka

209

27. Arthroscopic Treatment of Interosseous Ligament Tears, Carpal Instability, and Capsular Electrothermal Shrinkage Techniques 217 Gregory K. Deirmengian and Pedro K. Beredjiklian

28. Percutaneous and Arthroscopic-Assisted Reduction of Intraarticular Distal Radius Fractures 223 William B. Geissler

29. Arthroscopic Treatment of Metacarpophalangeal Joint Fractures in the Hand Rocco A. Barbieri, Jr.

235

Contents & ix

PART VI(B): WRIST AND HAND ARTHROSCOPY

RECONSTRUCTION

30. Triangular Fibrocartilage Tears and Ulnocarpal Impaction Vincent Ruggiero

239

31. Minimally Invasive Treatment of Arthritis Associated with Scapholunate and Scaphoid Nonunion Advanced Collapse 247 Charles M. Jobin, Steven H. Goldberg, and Robert J. Strauch

32. Arthroscopic Treatment of Wrist Ganglion Cysts

257

Scott R. Hadley and Ranjan Gupta

33. Basal Joint Arthritis-Arthroscopy/Debridement Jay T. Bridgeman and Sanjiv H. Naidu

263

34. Arthroscopy of the Basal Joint: Treatment of Arthritis with Soft-Tissue Interposition 267 Julie E. Adams and Scott P. Steinmann

PART VII: NERVE COMPRESSION 35. Endoscopic Carpal Tunnel Release: The Single-Portal Mirza Technique Tamara D. Rozental, Charles S. Day, and Orrin I. Franko

36. Endoscopic Carpal Tunnel Release: Chow Technique James C.Y. Chow and Athanasios A. Papachristos

281

37. Limited Incision Carpal Tunnel Release with the Indiana Tome Kenneth R. Means, Jr., James P. Higgins, and Thomas J. Graham

293

38. Minimally Invasive Carpal Tunnel Release Using the Security Clipe James W. Strickland and Lance A. Rettig

39. Endoscopic Carpal Tunnel Release: Agee Technique Emran Sheikh, Ednan Sheikh, and Virak Tan

275

299

305

PART VIII: TENDONS AND SOFT TISSUES 40. Percutaneous Trigger Finger Release Min Jong Park

41. Endoscopic DeQuervain’s Release Joseph F. Slade III and Greg Merrell

311 317

42. Treatment of Pyogenic Flexor Tenosynovitis Using Closed Catheter Irrigation Karol A. Gutowski

43. Dupuytren’s Contracture

327 Lawrence C. Hurst and Marie A. Badalamente

Index

333

321

Contributors

Julie E. Adams

Department of Orthopedic Surgery, Mayo Clinic, Rochester, Minnesota, U.S.A.

Vikrant Azad Department of Orthopedics, The New Jersey Medical School, University of Medicine and Dentistry of New Jersey, Newark, New Jersey, U.S.A. Marie A. Badalamente New York, U.S.A. Rocco A. Barbieri, Jr.

Department of Orthopedics, State University of New York, Stony Brook, Southern Bone & Joint Specialists, Hattiesburg, Mississippi, U.S.A.

Pedro K. Beredjiklian Department of Orthopedic Surgery, Hospital of the University of Pennsylvania, Presbyterian Medical Center, Philadelphia, Pennsylvania, U.S.A. David J. Bozentka Department of Orthopedic Surgery, University of Pennsylvania Medical Center, Philadelphia, Pennsylvania, U.S.A. Jay T. Bridgeman Department of Orthopedics and Rehabilitation, Penn State University College of Medicine, Hershey, Pennsylvania, U.S.A. John T. Capo Department of Orthopedics, The New Jersey Medical School, University of Medicine and Dentistry of New Jersey, Newark, New Jersey, U.S.A. James C.Y. Chow

Orthopaedic Center of Southern Illinois, Mount Vernon, Illinois, U.S.A.

Aaron Daluiski Department of Orthopedic Surgery, Hospital for Special Surgery and Weill Medical College of Cornell University, New York, New York, U.S.A. Charles S. Day Department of Orthopedic Surgery, Beth Israel Deaconess Medical Center, Harvard Medical School, Boston, Massachusetts, U.S.A. Gregory K. Deirmengian Department of Orthopedic Surgery, Hospital of the University of Pennsylvania, Presbyterian Medical Center, Philadelphia, Pennsylvania, U.S.A. Drew Engles Summit Hand Center, Crystal Clinic, Inc., Akron, Ohio, U.S.A. Orrin I. Franko Department of Orthopedic Surgery, Beth Israel Deaconess Medical Center, Harvard Medical School, Boston, Massachusetts, U.S.A. Alan E. Freeland Department of Orthopedic Surgery and Rehabilitation, University of Mississippi Medical Center, Jackson, Mississippi, U.S.A. David A. Fuller Cooper University Hospital, University of Medicine and Dentistry of New Jersey, Camden, New Jersey, U.S.A. Ankur Gandhi Department of Orthopedics, The New Jersey Medical School, University of Medicine and Dentistry of New Jersey, Newark, New Jersey, U.S.A. William B. Geissler Department of Orthopedic Surgery and Rehabilitation, University of Mississippi Medical Center, Jackson, Mississippi, U.S.A. Thomas J. Gillon Department of Orthopedics and Rehabilitation, Yale University School of Medicine, New Haven, Connecticut, U.S.A. Steven H. Goldberg Department of Orthopedic Surgery, Columbia University Medical Center, New York, New York, U.S.A.

xii & Contributors

Thomas J. Graham Maryland, U.S.A.

The Curtis National Hand Center, Union Memorial Hospital, Baltimore,

Ranjan Gupta Peripheral Nerve Research Laboratory, Department of Orthopedic Surgery, Anatomy & Neurobiology, and Biomedical Engineering, University of California, Irvine, Irvine, California, U.S.A. Karol A. Gutowski Division of Plastic and Reconstructive Surgery, University of Wisconsin, Madison, Wisconsin, U.S.A. Scott R. Hadley Peripheral Nerve Research Laboratory, Department of Orthopedic Surgery, University of California, Irvine, Irvine, California, U.S.A. Douglas P. Hanel Section of Hand and Microvascular Surgery, Department of Orthopedics and Sports Medicine, University of Washington, Seattle, Washington, U.S.A. James P. Higgins Maryland, U.S.A. Lawrence C. Hurst New York, U.S.A.

The Curtis National Hand Center, Union Memorial Hospital, Baltimore, Department of Orthopedics, State University of New York, Stony Brook,

Igon Indriago Miami Hand Center, Miami, Florida, U.S.A. Charles M. Jobin Department of Orthopedic Surgery, Columbia University Medical Center, New York, New York, U.S.A. Min Jong Park Department of Orthopedic Surgery, Samsung Medical Center, Sungkyunkwan University School of Medicine, Seoul, Korea Jesse B. Jupiter Orthopedic Hand Service, Massachusetts General Hospital, Harvard Medical School, Boston, Massachusetts, U.S.A. Mark L. Kavanagh Department of Orthopedics, The New Jersey Medical School, University of Medicine and Dentistry of New Jersey, Newark, New Jersey, U.S.A. Tosca Kinchelow Department of Orthopedics, The New Jersey Medical School, University of Medicine and Dentistry of New Jersey, Newark, New Jersey, U.S.A. Anthony J. Lauder Department of Orthopedic Surgery and Rehabilitation, University of Nebraska Medical Center, Omaha, Nebraska, U.S.A. Sheldon Lin Department of Orthopedics, The New Jersey Medical School, University of Medicine and Dentistry of New Jersey, Newark, New Jersey, U.S.A. Frank Liporace Department of Orthopedics, The New Jersey Medical School, University of Medicine and Dentistry of New Jersey, Newark, New Jersey, U.S.A. Christophe L. Mathoulin Margaret M. McQueen

Institut de la Main, Clinique Jouvenet, Paris, France Royal Inﬁrmary of Edinburgh, Edinburgh, Scotland, U.K.

Roy A. Meals Department of Orthopedic Surgery, David Geffen School of Medicine at UCLA, Los Angeles, California, U.S.A. Kenneth R. Means, Jr. The Curtis National Hand Center, Union Memorial Hospital, Baltimore, Maryland, U.S.A. Greg Merrell Department of Orthopedics, Brown University School of Medicine, Providence, Rhode Island, U.S.A. Bruce A. Monaghan Orthopedics at Woodbury, Woodbury, New Jersey, U.S.A. Sanjiv H. Naidu Department of Orthopedics and Rehabilitation, Penn State University College of Medicine, Hershey, Pennsylvania, U.S.A. Damon Ng Department of Orthopedics, The New Jersey Medical School, University of Medicine and Dentistry of New Jersey, Newark, New Jersey, U.S.A.

Contributors & xiii

Jose´ M. Nolla Department of Hand and Upper Extremity Surgery, Massachusetts General Hospital, Harvard Medical School, Boston, Massachusetts, U.S.A. Jorge L. Orbay Miami Hand Center, Miami, Florida, U.S.A. Athanasios A. Papachristos Vernon, Illinois, U.S.A.

Orthopaedic Research Foundation of Southern Illinois, Mount

Regis L. Renard Department of Orthopedics, The New Jersey Medical School, University of Medicine and Dentistry of New Jersey, Newark, New Jersey, U.S.A. Lance A. Rettig Department of Orthopedic Surgery, Indiana University School of Medicine, Indianapolis, Indiana, U.S.A. Melvin P. Rosenwasser Department of Orthopedic Surgery, Columbia University Medical Center, New York, New York, U.S.A. Tamara D. Rozental Department of Orthopedic Surgery, Beth Israel Deaconess Medical Center, Harvard Medical School, Boston, Massachusetts, U.S.A. David S. Ruch Department of Orthopedics, Duke University Medical Center, Durham, North Carolina, U.S.A. Vincent Ruggiero

Staten Island University Hospital, Staten Island, New York, U.S.A.

Ednan Sheikh Department of General Surgery, New York Presbyterian Hospital/Weill Cornell Medical Center, New York, New York, U.S.A. Emran Sheikh Department of Orthopedics and Plastic Surgery, Rothman Institute, Thomas Jefferson University, Philadelphia, Pennsylvania, U.S.A. Joseph F. Slade III Hand and Upper Extremity Service, Department of Orthopedics and Rehabilitation, Yale University School of Medicine, New Haven, Connecticut, U.S.A. Scott P. Steinmann U.S.A.

Department of Orthopedic Surgery, Mayo Clinic, Rochester, Minnesota,

Robert J. Strauch Department of Orthopedic Surgery, Columbia University Medical Center, New York, New York, U.S.A. James W. Strickland Department of Orthopedic Surgery, Indiana University School of Medicine, Indianapolis, Indiana, U.S.A. Kenneth G. Swan, Jr. Department of Orthopedics, The New Jersey Medical School, University of Medicine and Dentistry of New Jersey, Newark, New Jersey, U.S.A. Virak Tan Department of Orthopedics, The New Jersey Medical School, University of Medicine and Dentistry of New Jersey, Newark, New Jersey, U.S.A. Amel Touhami Yi-Meng Yen

Miami Hand Center, Miami, Florida, U.S.A. Steadman-Hawkins Clinic Vail, Vail, Colorado, U.S.A.

Part I: Introduction

1 Technical Considerations and Anatomical Basis for Minimally Invasive Hand Surgery Virak Tan and John T. Capo

Department of Orthopedics, The New Jersey Medical School, University of Medicine and Dentistry of New Jersey, Newark, New Jersey, U.S.A.

& INTRODUCTION Anatomic structures in the hand and wrist lie in close proximity to each other and are critical for precise functioning of the upper extremity. Therefore, minimally invasive surgery (MIS) in this region of the body is of particular interest because of the desire to restore hand function as quickly as possible after a surgical procedure. Oftentimes, the pain, discomfort, and other morbidity associated with surgery are due to the surgical dissection to access the area of interest rather than from the procedure itself. As such, decreased surgical trauma and tissue disruption will lead to decreased postoperative pain and swelling, shorter recovery period, and a faster return to activities of daily living. These advantages not only beneﬁt patients, but also the health care system because most procedures can be done on an outpatient basis; and when required, hospital stays are usually shorter than those for traditional open procedures. Disadvantages to MIS are the steep learning curve for the surgeon and staff, and higher costs (1). In the early part of the learning curve, MIS is considered more technically demanding than traditional open surgical methods. Surgeons are working in smaller areas through smaller incisions, and need to employ a three-dimensional mental picture of the anatomy. Using instruments like trocars, endoscopes, and cameras requires some degree of “hand–eye” coordination and technological knowhow by the surgeon and his or her assistants. Arthroscopic instruments can be more difﬁcult to maneuver and manipulate because the working end is further away from the surgeon’s hands. Often, the surgeon is not looking directly at the threedimensional operative ﬁeld but at a two-dimensional video screen, which may add to the difﬁculty of the procedure. Because of this, there is a possibility of causing iatrogenic trauma to surrounding tissue that is not in view of the camera or ﬂuoroscopic image. However, these problems can usually be mastered with training, experience, and precise knowledge of the anatomy.

& ADVANCES IN HAND AND WRIST MIS There have been several factors that have led to advances in wrist and hand MIS. First, improvements in ﬁber-optic technology (and its use in the arthroscope and endoscope) have enhanced visualization of intra- and periarticular anatomy that previously could not be seen on standard open exposures. At the time of this writing, arthroscopy is generally agreed to be the gold standard for diagnosis of intra-articular wrist pathology (2). In conjunction with improved visualization of the

joint, dedicated and appropriately sized arthroscopic instruments have been developed for the surgeon to treat pathologies in the hand and wrist (3). For example, triangular ﬁbrocartilage complex tears can be debrided or repaired through the scope (4). Similar to the larger joints, small joint arthroscopic surgery has gained a place in the upper extremity and continues to push the ﬁeld of MIS forward. The mini C-arm image intensiﬁer has also been a major contribution to MIS of the upper extremity, combining superior image quality, ease of use, and relatively low doses of emitted radiation (5–7). A typical mini C-arm has a focus X-ray tube that uses 0.02 to 0.10 mA of current with a tube potential of 40 to 75 kV and a narrow ﬁeld, resulting in less ionizing radiation than the bigger C-arms. The patient’s arm can be placed close to the image intensiﬁer to generate high-quality digital images, yet there is enough room to perform the surgery (Fig. 1). This capacity to perform an operation under dynamic, real-time ﬂuoroscopy allows for percutaneous reduction and ﬁxation of a fracture, thereby lessening the invasiveness of the procedure. Another area of MIS advancement in the hand and wrist is the development of implants and surgical devices speciﬁc to minimally invasive techniques. For example, the MICRONAIL (Wright Medical Technology, Arlington, Tennessee, U.S.A.) was designed to be inserted by percutaneous means through the “bare spot” between the ﬁrst and second dorsal compartment tendons; it is a rigid ﬁxation device for distal radius fractures and malunions (8,9). For metacarpal and proximal phalangeal shaft fractures, ﬂexible prebent intramedullary nails can be inserted through a small incision at the base of the bone with the aid of a prefabricated awl (Small Bone Fixation System, Hand Innovations, LLC, Miami, Florida, U.S.A.) (10). Minimally invasive carpal tunnel release can be performed with one of several systems (11) that were designed speciﬁcally for the purpose of dividing the transverse carpal ligament without violating the overlying skin and subcutaneous tissue, as is done with the traditional open method. Another example of a specially designed instrument is the HAKI knife (BK Meditech Inc., Seoul, South Korea), which was developed for percutaneous trigger ﬁnger release (12). In addition, there are other devices that are not described in this book and more that are being developed, which will also contribute to the MIS ﬁeld.

& ANATOMIC BASIS FOR HAND AND WRIST MIS The wrists and hands are particularly suitable for minimally invasive procedures because for the most part the anatomic structures are subcutaneous. Additionally, tendon excursion is

2 & Tan and Capo

FIGURE 1 Use of a mini C-arm during percutaneous scaphoid ﬁxation. The C-arm is draped out sterilely and used in the horizontal fashion with the wrist close to the image intensiﬁer side. Source: Courtesy of Virak Tan, MD.

of major importance to the function of the hand, and procedures that limit postoperative swelling and tendon adhesions, such as MIS, are of great value. The major neurovascular structures in the wrist and hand are located volarly; therefore, the majority of arthroscopic portals, limited incision surgical approaches and locations of percutaneous Kirschner (K)-wire placement for minimally invasive techniques are situated dorsally (Fig. 2). As such, the extensor tendons are most at risk for injury, but most of these injuries are relatively minor. Arthroscopic portals are based with respect to the extensor tendons (Fig. 2). The 3/4 portal lies between the third and fourth extensor compartments, and the 4/5 portal is between the fourth and ﬁfth compartments, where there is minimal risk to neurovascular structures. The dorsal ulnar sensory nerve is in close proximity to the 6U and 6R portals, which are located just ulnar and radial to the extensor carpi ulnaris tendon, respectively. The interval between the abductor pollicis longus and extensor carpi radialis longus tendons (at the base of the anatomic snuffbox) is the location for the 1/2 portal, entry point of the MICRONAIL, and radialsided percutaneous K-wires. Care must be taken in this area of the wrist due to the proximity of the radial sensory nerve and deep branch of the radial artery (Fig. 3). With surgical approaches to the thumb carpometacarpal joint, the radial sensory nerve is still at risk. In most instances, the described approaches for minimally invasive procedures of the metacarpals and metacarpophalangeal joints require only avoidance of the extensor tendons. A mini C-arm may be helpful for localization of the joint or bone. There are only several minimally invasive procedures that utilize the volar side of the hand. Endoscopic carpal tunnel release is performed with small volar skin incision(s) that is in the corridor between the hook of the hamate and the palmaris longus tendon (Fig. 4). Instruments that are placed too far ulnarly will potentially injure the ulnar neurovascular bundle in Guyon’s canal, and those too radial may injure the median nerve. Kaplan’s cardinal line serves as a landmark for the distal edge of the transverse carpal ligament and is proximal to the superﬁcial palmar arch (13). For percutaneous trigger release and palmar incisions for drainage of suppurative ﬂexor tenosynovitis, knowledge of the ﬂexor sheath and pulley anatomy is essential (Fig. 5). Studies have demonstrated that

the proximal edge of the ﬁrst annular pulley coincides with the proximal palmar crease in the index ﬁnger, halfway between the proximal and distal palmar creases in the middle ﬁnger, and at the distal palmar crease in the ring and little ﬁngers (14,15). In the thumb, the metacarpophalangeal crease overlies the middle portion of the A1 pulley, but speciﬁc attention must be given to the radial digital nerve because it traverses from ulnar to radial across the metacarpal in close proximity to the pulley (16).

1

2 3

4

5

6

DUSN

RSN

FIGURE 2 Surgical anatomy of the wrist and hand. Injuries to the extensor tendons can be minimized with blunt dissection to mobilize them from the surgical approach. The RSN and DUSN are most at risk of injury at the wrist during radial and ulnar sided approaches, respectively. Portals for wrist arthroscopy are named according to the dorsal extensor compartments: green (1/2), red (3/4), blue (4/5), white (6R) and pink (6U). Abbreviations: DUSN, dorsal ulnar sensory nerve; RSN, radial sensory nerve. Source: Courtesy of Virak Tan, MD.

Technical Considerations and Anatomical Basis & 3

ER

3

2

1 RSN

Radial artery CMC

In the ﬁngers, the mid-axial approach is preferred because it is dorsal to the digital neurovascular bundle. This line is established by connecting the dorsal most points of the interphalangeal ﬂexion creases and extending it over the proximal and distal phalanges (Fig. 6). Staying dorsal to the mid-axial line minimizes the risk of injury to the digital neurovascular structures (Fig. 7).

& SUMMARY

FIGURE 3 Surgical anatomy of the radial side of the wrist, showing the relative position of the RSN in relationship to the extensor tendons and underlying joints. Abbreviations: RSN, radial sensory nerve; CMC, thumb basal (carpometacarpal) joint; RA, radial artery; ER, extensor retinaculum. Source: Courtesy of Virak Tan, MD.

ﬁne dexterity. These requirements rely on the appropriate alignment and integrity of several tissue types, including bone, tendon, nerve, and blood vessels. Operative procedures that can repair and/or reconstruct these structures by minimally invasive techniques with decreased trauma to the tissue and gliding planes will improve and accelerate outcomes. Novel surgical techniques and improved technologies, as described in this book, have enhanced the ﬁeld of hand surgery. Factors that have lead to advances in the hand and wrist MIS included: endoscopic/arthroscopic technology, high image

The various anatomic structures in the hand are in close proximity to each other and are critical for precise functioning of the upper extremity. The hand and wrist act together as a specialized unit that has multiple functional requirements: ﬁne sensation, prehensile power grip, motion in several planes, and

Kaplan,s line

Superficial palmar arch

Motor branch Hook of hamate Pisiform Ulnar n. & a.

Radial a. Median n. PL FCR

FIGURE 4 Surgical anatomy for endoscopic/minimal incision carpal tunnel release. The “safe zone” is in the corridor (white rectangular area) between the palmaris longus tendon and hook of the hamate. Source: Courtesy of Virak Tan, MD.

FIGURE 5 Positions of the A1 pulleys relative to the ﬂexion creases in the palm. The proximal edge of the A1 coincides with the proximal palmar crease (black dotted line) in the index ﬁnger, halfway between the proximal and distal palmar creases in the middle ﬁnger, and the distal palmar crease (white dotted line) in the ring and little ﬁngers. In the thumb, metacarpophalangeal crease (black dashed line) indicates the middle of the A1 pulley. Source: Courtesy of Virak Tan, MD.

4 & Tan and Capo

FIGURE 6 The mid-axial line of an index ﬁnger. The dorsal most points of the interphalangeal joint ﬂexion creases are marked with the ﬁnger ﬂexed (far left). The dots are connected, establishing the mid-axial line over the proximal and distal phalanges (middle and far right). Source: Courtesy of Virak Tan, MD.

2.

Dorsal

3. 4.

ET Bone

5.

LB

6.

, Cleland s ligament

Flexor tendons

Digital a. & n.

Volar FIGURE 7 Diagram of a cross section of a digit. The mid-axial approach (open arrow) is dorsal to the digital neurovascular bundle. Any surgical approach that is in the arc dorsal to the mid-axial line (dashed line) carries a low risk of injury to the digital arteries and nerves. Abbreviations: ET, extensor tendon; LB, lateral band. Source: Courtesy of Virak Tan, MD.

quality mini C-arm, and MIS-speciﬁc devices and implants. Although there is a steep initial learning curve, precise knowledge of the anatomy and surgical techniques will allow for safe application of these procedures and faster recovery for patients.

& REFERENCES 1.

Lorgelly PK, Dias JJ, Bradley MJ, Burke FD. Carpal tunnel syndrome, the search for a cost-effective surgical intervention: a randomised controlled trial. Ann R Coll Surg Eng 2005; 87(1):36–40.

7.

8. 9. 10. 11. 12. 13. 14. 15. 16.

Monaghan BA. Uses and abuses of wrist arthroscopy. Tech Hand Up Extrem Surg 2006; 10(1):37–42. Savoie FH, III, Whipple TL. The role of arthroscopy in athletic injuries of the wrist. Clin Sports Med 1996; 15(2):219–33. Dailey SW, Palmer AK. The role of arthroscopy in the evaluation and treatment of triangular ﬁbrocartilage complex injuries in athletes. Hand Clin 2000; 16(3):461–76. Athwal GS, Bueno RA, Jr., Wolfe SW. Radiation exposure in hand surgery: mini versus standard C-arm. J Hand Surg [Am] 2005; 30(6):1310–6. Badman BL, Rill L, Butkovich B, Arreola M, Griend RA. Radiation exposure with use of the mini-C-arm for routine orthopaedic imaging procedures. J Bone Joint Surg [Am] 2005; 87(1):13–7. Sinha S, Evans SJ, Arundell MK, Burke FD. Radiation protection issues with the use of mini C-arm image intensiﬁers in surgery in the upper limb. Optimisation of practice and the impact of new regulations. J Bone Joint Surg [Br] 2004; 86(3):333–6. Brooks K, Capo J, Warburton M, Tan V. Internal ﬁxation of distal radius fractures with novel intramedullary implants. Clin Orthop Rel Res 2006; 445:42–50. Tan V, Capo J, Warburton M. Distal radius ﬁxation with an intramedullary nail. Tech Hand Up Extrem Surg 2005; 9(4):195–201. Orbay J. Intramedullary nailing of metacarpal shaft fractures. Tech Hand Up Extrem Surg 2005; 9(2):69–73. Nagle DJ. Endoscopic carpal tunnel release. Hand Clin 2002; 18(2):307–13. Ha KI, Park MJ, Ha CW. Percutaneous release of trigger digits. J Bone Joint Surg [Br] 2001; 83(1):75–7. Vella JC, Hartigan BJ, Stern PJ. Kaplan’s cardinal line. Hand Surg [Am] 2006; 31(6):912–8. Bain GI, Turnbull J, Charles MN, Roth JH, Richards RS. Percutaneous A1 pulley release: a cadaveric study. J Hand Surg [Am] 1995; 20(5):781–4. Lorthioir J. Surgical treatment of trigger ﬁnger by a subcutaneous method. J Bone Joint Surg [Am] 1959; 40:793–5. Pope DF, Wolfe SW. Safety and efﬁcacy of percutaneous trigger ﬁnger release. J Hand Surg [Am] 1995; 20(2):280–3.

Part II: Basic Techniques

2 Use of Suture Anchors in Hand Surgery Aaron Daluiski

Department of Orthopedic Surgery, Hospital for Special Surgery and Weill Medical College of Cornell University, New York, New York, U.S.A.

Virak Tan

Department of Orthopedics, The New Jersey Medical School, University of Medicine and Dentistry of New Jersey, Newark, New Jersey, U.S.A.

& INTRODUCTION In hand surgery, it is often necessary to repair soft tissue to bone. Prior to the advent of suture anchors, tissue such as capsule, ligament, or tendon was attached to bone by direct suture to periosteum, or use of bone tunnels with pullout sutures or sutures tied over a bone bridge. Although useful and costeffective, all of these techniques have a certain limitations and do, at times, require longer or separate incisions and signiﬁcantly more soft tissue dissection and stripping. One of the traditional methods of soft tissue reattachment to bone is suturing the soft tissue over a bone bridge. This is performed by creating two or three drill holes in the bone and passing the soft tissue, such as a slip of tendon, or suture on either side of the tunnel and tying it over the bone bridge. If done through the same incision, the skin and soft tissue dissection needs to be extended to gain adequate exposure of the bony cortical surface. Alternatively, the bone bridge can be at the far cortex, but this requires a second incision (Fig. 1). Additionally, the use of the bone bridge is limited to the larger bones of the hand and wrist because creating bone tunnels in small bones carries substantial risks. It is possible to either make the bone tunnels too small for the tendon to pass through, or to make the holes in the bone too large risking fracture of the adjacent bone bridge that is necessary for ﬁxation. These risks increase as the size of the bone decreases. Furthermore, the repair is often bulky, making subsequent skin closure more difﬁcult. When the size of the bone does not allow for bone tunnels, a button can be used as a substitute to the bone bridge to provide ﬁxation. The use of this technique requires the use of a pullout smooth suture or wire that is placed in the soft tissue in a non-locking fashion. The two ends of the suture are then passed through (or on either side of) the bone, out of the skin and tied over a padded button (Fig. 2). This externally placed button diffuses the pressure across the underlying soft tissue but may still cause skin irritation or breakdown and, in rare cases, damage the superﬁcial nerves in the region. After appropriate soft tissue-to-bone healing has occurred, typically about six weeks, the button is then cut from the suture and the pullout suture removed by traction, that is why it must be placed in non-locked fashion initially. The use of this technique can be technically challenging, often requires more extensive dissection, and cannot be used with a grasping or locking stitch, which can theoretically reduce the overall resistance to

gapping of the construct [though there is some data to the contrary (1,2)]. Additionally, there can be poor tolerance by patients. With the development of suture anchors, stable ﬁxation of soft tissue to bone can be achieved with less technical difﬁculty, smaller incisions, and minimal dissection. Although beneﬁt to the patient in terms of improved outcomes has been shown only for some procedures (1), there is increasing acceptance of the use of suture anchors for many hand and wrist surgeries. The development of smaller devices has allowed wide use of anchors, from the wrist all the way to the distal phalanx in most patients.

& INDICATIONS The indications for use of suture anchors are identical to the use of any other soft tissue to bone ﬁxation. A variety of common orthopedic hand procedures have been described using suture anchors as a method of repair, including ligament repair or reconstruction (1,3–11) [i.e., metacarpophalangeal (MP) collateral and scapholunate interosseous ligaments], repair of ﬂexor digitorum profundus (FDP) avulsions (1,10,11), swan-neck corrections (12), wrist or digit extensor tendon reinsertion (12), and joint capsulodesis procedures (12–14). The design and manufacture of newer small implants has allowed these devices to be used in essentially all bones of the hand including the distal phalanges (Table 1).

& CONSIDERATIONS IN SUTURE ANCHORS Numerous suture anchors are commercially available for use in the wrist and hand. The most important consideration is the size of the anchor relative to the bone for which it is to be inserted. For the distal radius, anchors should be less than 3 mm in diameter and 1 cm in length. Smaller anchors (in the range of 2.3!5 mm) should be used in the carpal and metacarpal bones and yet even smaller ones in the phalanges. The surgeon may choose either metallic (nonabsorbable) or bioabsorbable anchors which are usually made of polylactic acid polymers. The decision is based on surgeon preference and comfort level. The advantages of the metal anchors are their sturdiness during insertion and the potentially greater pullout strength. Lack of a metallic implant to obscure x-ray views is a beneﬁt of bioabsorbable anchors. Additionally, in the unfortunate circumstance of suture breakage, the surgeon can overdrill the absorbable anchor and use the same pilot hole in the bone.

6 & Daluiski and Tan

Sutures

2nd incision Bone bridge

Soft tissue

FIGURE 1 Diagram of a typical conﬁguration of soft tissue repair to bone using a bone bridge on the far cortex. Source: Courtesy of Virak Tan and Aaron Daluiski.

Another design consideration is the type of ﬁxation of the anchor to the bone. Three basic designs are in use: ﬂanges, toggle, and threaded screw-in. Anchors with ﬂanges operate based on the spring principle in which the ﬂanges collapse in the direction of insertion, but then deploy to embed in the bone when tension is applied in the opposite direction (Fig. 3); some ﬂanged anchors have interference ﬁt. The toggle mechanism works because of eccentric placement of the suture eyelet on the anchor itself. After seating the anchor into the pilot hole, tension on the sutures will rotate (i.e., “toggle”) the anchor, wedging it against the sides of the pilot hole (Fig. 4). Threaded anchors are screwed into the bone and purchase is determined by the outer diameter of the anchor, the length of engagement in the bone, the quality of the bone, and screw thread depth and pitch (Fig. 5). The type of ﬁxation has implications when creating the pilot hole. For ﬂange and toggle types, the pilot hole is slightly larger than the diameter of the anchor. On the other hand, a threaded anchor requires a smaller pilot hole than its outer diameter. Bioabsorbable threaded anchors may need tapping prior to their insertion because of the lower strength of the material. A compiled list of small bone suture anchor devices is presented in Table 1. It should be noted that this is by no means an inclusive list but contains the devices that the authors typically use. Padded button

FIGURE 2 Diagram of a typical conﬁguration of soft tissue repair to bone using a pullout suture tied over a padded button. Source: Courtesy of Virak Tan and Aaron Daluiski.

& GENERAL SURGICAL TECHNIQUE Regardless of the location, or which soft tissue type needs to be attached to bone by suture anchor(s), the general surgical technique is similar. Once the exposure is performed, the soft tissue of interest is assessed for adequate length, tension, and quality; the end is freshened accordingly. The repair or reconstruction should be done without undue tension or gapping at the soft tissue–bone interface. The bony bed is prepared by lifting the periosteum and abrading the cortical surface to increase the healing potential of the soft tissue to bone. The next step is to select the appropriate size anchor and suture material. For most anchors, the pre-loaded suture can be replaced by the surgeon’s choice suture. The pilot hole is created in the bony bed, usually with a drill, making sure to achieve adequate depth in the bone but avoiding penetration into the joint or far cortex. This is followed by insertion of the anchor. Stability of the anchor is checked by pulling tension on the sutures and there should not be any prominence of the anchor. Suturing of the soft tissue can be done in a number of ways. A common technique is to run a grasping or locking stitch through the soft tissue with one end of the suture, followed by a series of square knots, pushing the tissue down to the bony bed. Alternatively, the second limb is sutured through the tissue in a non-locking fashion and tied down as a mattress stitch. Locking the second limb will prevent sliding of the suture and risks gapping at the soft tissue–bone interface. Tying knots onto the suture anchor in this fashion has a different tactile feel because the tissue is being pushed instead of being pulled down to the bone. To get the “normal” feel of drawing the tissue to bone, two suture anchors can be used. One suture limb from each anchor is sewn through the tissue and tied together. Tension is applied to the free ends of the sutures; thereby pulling down the tissue. Tying is then performed in the usual manner.

& Thumb MP Joint Ulnar Collateral Ligament Repair By far the most common use of suture anchors in hand surgery, as cited in the literature, is repair or reconstruction of the thumb MP joint collateral ligament (Fig. 6) (3–9,12,15,16). After standard regional or general anesthetic agent and prep, a longitudinal incision is made directly over the thumb MP joint along its ulnar mid-axial border under tourniquet control. Initial dissection following the skin incision is meticulously performed to examine for a Stener lesion [i.e., retraction of the ulnar collateral ligament (UCL) proximal to the adductor aponeurosis] which sometimes is apparent at this level. If no Stener lesion is present, the adductor aponeurosis is carefully identiﬁed and incised along its ulnar border taking care not to injure the extensor mechanism. Care is also taken to protect the branch of the superﬁcial radial nerve at the volar extent of the wound (Fig. 6A). Once this is complete, the underlying capsule of the thumb MP joint is identiﬁed. Oftentimes a frank capsular tear will be present and the UCL exposed. A dorsoulnar incision in the capsule is made in longitudinal fashion. Great care must be taken in the distal transverse extension of this incision to open the joint, especially when the UCL has been completely torn but a Stener lesion is not present. It is necessary to ensure that the dissection is carried out far enough distal with the longitudinal capsular incision in order not to sacriﬁce any of the ﬁbers of the UCL. It is often found that the UCL, once ruptured from the base of the proximal phalanx, can scar to the palmar plate making it appear more volar than

Use of Suture Anchors in Hand Surgery & 7 TABLE 1 Selection of Small Bone Soft Tissue Fixation Devices

Anchor

Manufacturer

Ultraﬁx Micromite (Fig. 2) Mini-Revo

Conmed Linvatec Conmed Linvatec Mitek

Minilok Quickanchor Plus Microﬁx Quickanchor Plus (Fig. 4) Mini Quickanchor Plus (Fig. 3) Micro Quickanchor Plus (Fig. 3)

Absorbable

Drill/anchor diameter (mm)

Suture

No

1.8/1.5

No

1.5/2.7 2.0 1.3

3-0, 4-0 Ethibond

Mitek

Yes (polylactic acid) Yes (polylactic acid) No

2-0 Nonabsorbable braided polyesther #2 Nonabsorbable braided polyester #0, 2-0, 2-0 Panacryl

2.1

2-0, #0 Ethibond

Mitek

No

1.3

3-0 or 4-0 Ethibond

Mitek

its typical insertion on the base of the proximal phalanx. In addition, great care must be taken to ensure that the collateral ligament has not healed back upon itself (Fig. 6B). If the ﬁbers are not carefully traced, the ligament may appear much shorter than its true length. If this is not recognized, it may appear as though there is inadequate length for direct repair and a tendon graft may be used inappropriately. It is the authors’ experience that it is rare to require a tendon graft for the repair of acute ligamentous (i.e., injuries that are not the result of chronic ligamentous attenuation such as traditional “gamekeepers” injuries) rupture. Once it is ensured that adequate ligament length is available for repair, the base of the proximal phalanx is prepared by roughening the periosteum and cortical bone (Fig. 6C). The joint is then explored. A suture anchor is carefully placed into the base of the proximal phalanx and checked to ensure that it is adequately anchored to the bone (Fig. 6D). The ligament is then repaired directly to the base of the proximal phalanx. With a single knot placed in the ligament, the ligament is then checked to ensure stability. If it is stable, the stitch is then used to add

(A)

(B)

Needle

Os-2 (#0), V-5, or RB-1 (2-0) V-4 (3-0), C-1, or P-3 (4-0) Os-2 (#0), V-5 (2-0) V-4 (3-0), C-1, or P-3 (4-0)

Fixation

Deployment

4 Flanges

Gun-type device

Screw-in

Handheld, screw-in

Toggle

Handheld, mallet

Toggle

Handheld, mallet

2 Flanges

Handheld insertion device Handheld insertion device

2 Flanges

additional knots between the ligament, periosteum and capsule. The capsule is then closed in a separate layer. Capsular repair adds additional support. Once hemostasis is achieved after tourniquet is deﬂated, the extensor mechanism and skin are closed are in layers.

& REHABILITATION AND OUTCOME Rehabilitation protocols vary and should be tailored to each speciﬁc indication. Repair of an FDP avulsion, which requires early active range of motion, may require implants with stronger pullout strength than UCL repairs of the thumb MP joint, which can be rehabbed essentially tension-free immediately after surgery. Pullout strength of several anchor devices are at least as effective as repair over a button for FDP avulsions (11) and clinical outcomes are similar, with a decreased time of return to work in patients in whom the anchors were used (1). Clearly, outcome data for each speciﬁc operative procedure are dependent on the procedure performed. In general, the use of suture anchors as opposed to traditional techniques has yielded similar or better outcome in part due to the reduced dissection required to achieve good ﬁxation of soft tissue to bone. These ﬁndings have not been proven for most clinical uses.

Sutures

Flanges

FIGURE 3 Flanged anchor: During insertion into the bone, the ﬂanges collapse (A). After removal of the handle, with tension on the sutures, the ﬂanges embed into the sides of the pilot hole, resisting dislodgement (B). Source: Courtesy of Virak Tan and Aaron Daluiski.

Pilot hole

FIGURE 4 Toggle anchor: Due to the eccentricity of the eyeslet, tension on the sutures after insertion causes the entire anchor to rotate and embed into sides of the pilot hole, resisting dislodgement. Source: Courtesy of Virak Tan and Aaron Daluiski.

8 & Daluiski and Tan

& COMPLICATIONS

FIGURE 5 Threaded anchor: It is inserted by screwing it into an undersized pilot hole. Source: Courtesy of Virak Tan and Aaron Daluiski.

Complications of suture anchor use are similar to those for the open techniques and are based more on the surgical procedure performed rather than to the actual implant itself. There are, however, some implant-speciﬁc complications which are worth noting. It is important to match the size of the implant, both diameter and length, with the size of the bone into which the soft tissue is being repaired. Use of smaller implants is absolutely required for smaller bones. If not, the implant may be too large for the bone and can cause a fracture. In addition, larger implants tend to have a drill depth commensurate with the size of the implant. Placement of a standard suture anchor volarly in a middle phalanx, for example, will lead to overpenetration of the dorsal cortex and exposure of the implant dorsally. Proper position of the implant should be veriﬁed using dynamic ﬂuoroscopy following placement. Suture breakage, although not necessarily a complication speciﬁc to suture anchors, can lead to quite signiﬁcant

(B)

(A)

EPL Capsule

UCL

RSN (D)

(C)

MC PP

(E)

PP

UCL

UCL

(F)

FIGURE 6 Intraoperative photographs of a right hand dominant 20-year-old with an acute left thumb UCL injury. (A) After dissection through the extensor mechanism, a single dorsal ulnar capsular incision was made. (B) The avulsed UCL was identiﬁed. (C) The base of the PP was carefully roughened using a #69 blade and rongeur. (D) A Linvatec MicroMite suture anchor was placed at the base of the proximal phalanx and the ligament along with the capsule was repaired back to the bone. This afforded an excellent repair with complete stability to radial deviation. The capsule was then closed followed by the extensor mechanism and skin. (E & F) Post-operative radiographs showing the position of the suture anchor. Abbreviations: EPL, extensor pollicis longus; MC, metacarpal; PP, proximal phalanx; RSN, radial sensory nerve; UCL, ulnar collateral ligament. Source: Courtesy of Virak Tan and Aaron Daluiski.

Use of Suture Anchors in Hand Surgery & 9

complications with the use of these devices. If a suture anchor has already been placed into the bone and the suture breaks, it is often necessary to drill a new hole, which can lead to fracture and destabilization of the soft tissue repair. For certain implants, such as the MicroMite suture anchor (Linvatec Corp., Largo, Florida, U.S.A.), it is possible to carefully tamp the failed implant further into larger bones and utilize the same pilot hole. For bioabsorbable anchors, re-drilling the pilot hole over the anchor is an option. This avoids the need for an additional drill hole and helps minimize iatrogenic fracture. To reduce the chance of suture breakage, it is also possible to replace the suture that comes with the anchor with an appropriately sized Fiberwire (Arthrex, Inc., Naples, Florida, U.S.A.) or equivalent suture, prior to the initial anchor insertion. Additional complications tend to be more site speciﬁc as opposed to implant speciﬁc. Although failure of the implant in terms of bone pullout is possible, most of the implants have adequate pullout strength to withstand much of the force exerted on it during the postoperative rehabilitation (2,9,15– 17). This is especially true of thumb UCL repairs where it has been shown biomechanically that repaired ligaments have three times the strength than the force that the actual ligament withstands during protected non-pinch rehabilitation (16). There is a fair amount of attention paid to pullout strength of the suture anchors. Although it is interesting to note differences in pullout strength between different suture anchors, pullout strength is not solely limited to design of the suture anchor but also to the quality of the bone in which it is placed. In addition, since many anchors provide a pullout strength that is above what is required to hold the tissue to bone until it healed, differences between anchors are often not relevant.

& SUMMARY Suture anchors have been a useful adjunct in minimally invasive surgery by limiting the size of the incision and minimizing traumatic soft tissue dissection. They have been extremely helpful in a variety of procedures in the hand and wrist, all related to soft tissue ﬁxation to bone. A host of anchors exist that use drill diameters as small as 1.3 mm, which allow for ﬁxation to essentially all bones of the hand and wrist. Though there is a paucity of clinical outcomes data, numerous biomechanical studies and case series have shown adequate anchor pullout strength and acceptable clinical results. Due to ease of use and limited invasiveness, suture anchors are increasingly prevalent in hand surgery.

Outcomes &

Complications & & &

1. 2.

3. 4. 5. 6. 7. 8. 9.

10. 11. 12. 13. 14.

& & & & &

Repair or reconstruction of ligaments Repair of ﬂexor digitorum profundus avulsions Correction of swan-neck deformity Reinsertion of wrist or digit extensor tendon Joint capsulodesis

Similar to those for the open techniques Iatrogenic fracture or prominence of implant if the anchor is too large for the bone Suture breakage

& REFERENCES

& SUMMATION POINTS

Indications

Similar or better outcome to open procedures to attach soft tissue to bone

15. 16. 17.

McCallister WV, et al. Comparison of pullout button versus suture anchor for zone I ﬂexor tendon repair. J Hand Surg [Am] 2006; 31(2):246–51. Kusano N, et al. Supplementary core sutures increase resistance to gapping for ﬂexor digitorum profundus tendon to bone surface repair—an in vitro biomechanical analysis. J Hand Surg [Br] 2005; 30(3):288–93. Zeman C, et al. Acute skier’s thumb repaired with a proximal phalanx suture anchor. Am J Sports Med 1998; 26(5):644–50. Weiland AJ, et al. Repair of acute ulnar collateral ligament injuries of the thumb metacarpophalangeal joint with an intraosseous suture anchor. J Hand Surg [Am] 1997; 22(4):585–91. Tuncay I, Ege A. Reconstruction of chronic collateral ligament injuries to ﬁngers by use of suture anchors. Croat Med J 2001; 42(5):539–42. McDermott TP, Levin LS. Suture anchor repair of chronic radial ligament injuries of the metacarpophalangeal joint of the thumb. J Hand Surg [Br] 1998; 23(2):271–4. McCall J. Acute skier’s thumb repaired with a proximal phalanx suture anchor. Am J Sports Med 1999; 27(3):390–1. Kato H, et al. Surgical repair of acute collateral ligament injuries in digits with the Mitek bone suture anchor. J Hand Surg [Br] 1999; 24(1):70–5. Beauperthuy GD, Burke EF. Alternative method of repairing collateral ligament injuries at the metacarpophalangeal joints of the thumb and ﬁngers. Use of the Mitek anchor. J Hand Surg [Br] 1997; 22(6):736–8. Silva MJ, et al. The effects of multiple-strand suture techniques on the tensile properties of repair of the ﬂexor digitorum profundus tendon to bone. J Bone Joint Surg Am 1998; 80(10):1507–14. Brustein M, et al. Bone suture anchors versus the pullout button for repair of distal profundus tendon injuries: a comparison of strength in human cadaveric hands. J Hand Surg [Am] 2001; 26(3):489–96. Khandwala AR, Khan IU, Elliot D. The use of Acufex wedge tag tissue anchors in hand surgery. J Hand Surg [Br] 2004; 29(1):22–5. Cuenod P. Osteoligamentoplasty and limited dorsal capsulodesis for chronic scapholunate dissociation. Ann Chir Main Memb Super 1999; 18(1):38–53. Saffar P, Sokolow C, Duclos L. Soft tissue stabilization in the management of chronic scapholunate instability without osteoarthritis. A 15-year series. Acta Orthop Belg 1999; 65(4):424–33. Firoozbakhsh K, et al. A study of ulnar collateral ligament of the thumb metacarpophalangeal joint. Clin Orthop Relat Res 2002; 403:240–7. Harley BJ, Werner FW, Green JK. A biomechanical modeling of injury, repair, and rehabilitation of ulnar collateral ligament injuries of the thumb. J Hand Surg [Am] 2004; 29(5):915–20. Schuind F, et al. Flexor tendon forces: in vivo measurements. J Hand Surg [Am] 1992; 17(2):291–8.

3 The Role of Bone Graft Substitutes in Minimally Invasive Surgery of the Wrist and Hand Vikrant Azad, Ankur Gandhi, Frank Liporace, and Sheldon Lin

Department of Orthopedics, The New Jersey Medical School, University of Medicine and Dentistry of New Jersey, Newark, New Jersey, U.S.A.

& INTRODUCTION The standard technique to facilitate bone healing process is the harvest and application of autogenous bone graft. Iliac crest autograft remains today’s gold standard, since it is the only material that contains the three essential bone formation elements: cells, matrix, and critical growth factors. Approximately 340,000 patients undergo iliac crest graft harvesting procedure annually; however, autogenous bone graft comes with signiﬁcant costs. Harvesting of iliac crest bone can be associated with signiﬁcant clinical morbidity which includes donor site pain, scarring, increased surgical time, blood loss, and risk of infection. There is also prolonged hospitalization, delayed rehabilitation, and surgical complications, such as iliac fracture, hematoma, nerve injury, vascular injury, lumbar hernia, etc. (1–3). A review of the literature reveals that the complication rate can be as high as 31%, with approximately 27% of the patients continuing to feel pain at 24 months following surgery (4). In addition, the quantity of available graft harvested may be less than optimal. These reasons have led to the development and validation of alternative processes that are capable of replicating the performance of the iliac crest graft, while eliminating the associated complications. A variety of materials have been utilized as substitutes for autologous bone graft. Ceramics are one class of synthetic bone graft substitutes which have been very useful in many clinical orthopedic applications and have served as a useful adjunct to minimally invasive surgery for the wrist and hand.

& General Overview of Ceramic Bone Graft Substitutes Ceramics are highly crystalline materials formed by heating nonmetallic mineral salts to a high temperature in a process called sintering. The porous nature of these compounds provides an osteoconductive scaffold to which chemotactic factors, circulating osteoinductive growth factors, and mesenchymal stem cells can migrate and adhere. This scaffold provides a critical structure for progenitor cells to differentiate into functioning osteoblasts. Besides being biocompatible and bioresorbable, the crystalline structure of ceramics yields a material very similar to natural bone. Synthetic bone graft substitutes have several disadvantages which include a lack of osteogenic cells and the absence of osteoinductive potential normally found in allografts. However, the widespread availability of ceramic bone graft substitutes and the absence of allograft-induced immunogenic response or pathogen transmission provide an increasing incentive for the use of ceramics. In addition, the surgical complications of retrieving bone from an autologous donor site can be avoided (3,5,6).

& General Physical Properties of Ceramics as Bone Graft Substitutes Physical properties such as pore size and porosity are critical parameters of synthetic bone graft substitutes. Blood vessel penetration into the bone graft substitute is necessary for bone-forming cells to lay down new bone while the graft is being resorbed. To allow vascular ingrowth, the graft should have a pore size large enough to allow the vessels to grow into the graft. Previously, pore size was considered to be the most critical variable inﬂuencing bone formation within synthetic bone graft substitutes (7). Osteoid tissue forms when the pore size is greater than 100 mm with a pore size of 300 to 500 mm being ideal. Porosity, which is the interconnectivity of pores, is currently considered to be the more critical parameter compared to pore size (8). In the absence of adequate interconnectivity, the pores act like blind alleys with low oxygen tension at the pore apex. The relatively poor oxygen tension impairs the differentiation of mesenchymal cells toward an osteoblast cell lineage and instead leads to differentiation of mesenchymal cells into ﬁbrous tissue, cartilage, or fat (9). The in vivo degradation of cements has been another area of active research focused on making the degradation rate more predictable and closer to the rate of new bone formation. Ideally, a bone graft substitute is expected to resorb at the same rate as new bone is being synthesized and remodeled. If the rate of resorption is greater than the rate at which new bone can be laid down, the structural integrity of the bone graft substitute will collapse. On the other hand, a slow degradation rate will impede new bone formation resulting in an alteration of the local mechanical properties of bone. For example, hydroxyapatite is a slowly degrading calcium phosphate ceramic. The in vivo degradation of hydroxyapatite occurs over years and traces can be seen in the bone decades after implantation (10,11). Currently, there are two general commercial formulations of ceramic bone graft substitutes, calcium phosphate and calcium sulfate products. Both of these bone graft substitutes are used in two physical forms, solid (pellets, blocks) and injectable (paste/putty). The remainder of this chapter is dedicated to discussion of these products and their application to minimally invasive surgery of the wrist and hand.

& CALCIUM PHOSPHATE CEMENTS Calcium phosphate exists in three basic ionic combinations with phosphate—tribasic (tricalcium phosphate, TCP), dibasic (secondary calcium phosphate), and monobasic calcium phosphate. Of these three forms, TCP is most commonly used in

12 & Azad et al.

the manufacturing of calcium phosphate-based cements. TCP is available in two forms, alpha and beta TCP. Both are hightemperature TCPs with a chemical composition similar to amorphous TCP with alpha TCP being more crystalline than beta TCP (12). Alpha TCP is also more soluble than beta TCP and is a major component of calcium phosphate cements (13). In addition, alpha TCP has been reported to undergo faster degradation in vivo compared to beta TCP (13). However, the literature has also shown that beta TCP can undergo a faster degradation than alpha TCP in vivo (14). The injectable form of calcium phosphate cement is prepared by mixing various types of calcium phosphates with an aqueous solution. The resulting paste hardens to form a calcium phosphate apatite of low crystalline order and small crystal size similar to the mineral phase of bone. Brown and Chow prepared the ﬁrst calcium phosphate cement that could be constituted at room temperature using equimolar concentrations of tetracalcium phosphate and calcium hydrogen phosphate (15). Initially, dicalcium phosphate dihydrate is formed with a plate-like morphology which ultimately later yields calcium-deﬁcient hydroxyapatite. All current formulations of calcium phosphate cement are constituted via an endothermic reaction instead of exothermic reaction thereby limiting the potential for local tissue damage. Calcium phosphate cement hardening occurs mostly within the ﬁrst six hours, yielding an 80% conversion to hydroxyapatite with a compressive strength of 50 to 60 MPa. Hardening can be accelerated with phosphate solution, sodium ﬂuoride, or sodium hydrogen phosphate. Porosity can be introduced into the bone graft substitute by the addition of soluble inclusions such as sucrose, sodium hydrogen carbonate, or sodium hydrogen phosphate with the goal of improving osteoconductivity (16). The low temperature of formation and the inherent porosity also permit the addition of antibiotics to prevent bone infections or growth factors to stimulate differentiation of mesenchymal cells. Because the composition of calcium phosphate apatite cements is similar to natural bone apatite, the phosphatebased cement undergoes increased biological degradation compared to calcium sulfate. Experimental studies in vivo have shown that multinucleated osteoclast-like cells surround the implanted cement. At the same time, new bone is formed by osteoblasts and progresses into the scaffold provided by the apatite cements (14,17,18). The average resorption rate of the cement depends on many factors such as the composition of cement, site of implantation, patients’ metabolic rate, and general health. Comparing the experimental results of the degradations processes can often be difﬁcult due to the variability in study protocol and design.

& CALCIUM SULFATE CEMENTS Dreesmann used calcium sulfate as early as 1892 for cavitary bone lesions and observed healing in six of nine lesions (19). Peltier did the signiﬁcant early work on calcium sulfate in bone healing and ﬁrst described his experience in a preliminary report in 1959 (20). Later, Peltier and Jones reported their long-term follow-up results on 26 unicameral bone cysts of which 24 healed without complications (21). Several other authors have reported their results with the use of calcium sulfate as a bone graft substitute and in general have shown positive results. Despite the early work, in recent years, calcium phosphate-based cements have superseded calcium sulfate in their usage as injectable cement.

Calcium sulfate as a bone graft substitute is available in two chemical forms—calcium sulfate hemihydrate (plaster of Paris) and calcium sulfate dihydrate (gypsum). Calcium sulfate dihydrate produced after hydration of the hemihydrate form is chemically stable and available in solid shapes such as pellets and blocks. Hemihydrate when mixed with a diluent (water, saline, or other liquids) undergoes a hydration reaction to form a putty/paste and is converted into the dihydrate form. In this putty form, the calcium sulfate is injectable until it sets in as solid calcium dihydrate. Special care in the processing of calcium sulfate needs to be maintained in order to produce surgical grade calcium sulfate with a predictable resorption rate and optimal crystalline structure to provide an osteoconductive medium for new bone ingrowth. The mechanism of calcium sulfate resorption is not well understood but calcium sulfate appears to resorb by dissolution into surrounding body ﬂuids rather than by being actively degraded by cellular mechanisms (22,23). Recent literature has suggested that calcium sulfate may not be osteoconductive and that new bone formation occurs as the cement dissolves, possibly acting as a bone void ﬁller (24). The resorption of calcium sulfate in vivo is rapid and thus not suitable for clinical situations where cement is required to provide structural support. Therefore, calcium sulfate used alone is useful for contained nonstructural defects or as an adjunct to ﬁxation devices to improve their holding strength in bone. Calcium sulfate can also be used as a carrier for growth factors in the appropriate clinical applications (24–26).

& INDICATIONS The indications are still evolving for uses of calcium phosphate and calcium sulfate cements. Clinical experience with these bioactive cements in distal radius fractures and bone lesions (such as simple bone cysts, aneurysmal bone cysts, or enchondromas) is increasing. In the distal radius, these cements are especially useful in fractures with severe comminution, bone loss at the fracture site, or fractures involving osteoporotic bone which are difﬁcult to stabilize. Injectable bone cements, by providing additional mechanical stability, can reduce the immobilization time, allow earlier range of motion exercise and thereby facilitate rapid recovery (27–29). Bone lesions often require bone graft to ﬁll the defect which may be the result of the primary pathology or from curettage. Use of calcium-based bone graft substitutes in this setting obviates the need to obtain autologus bone graft. Additionally, because the material can be injected into the defect, only a small cortical window is required; thereby, minimizing further compromises to the integrity of the native bone. A reported complication is extrusion of the cement into the joint. Metaphyseal fractures frequently have subtle intraarticular extensions and the cement when injected under pressure may permeate through these intra-articular extensions. Once in the intra-articular space, the cement can cause persistent pain and wound drainage/infection. Lobenhoffer et al. reported a patient who developed sterile wound drainage with use of injectable cement for a tibial plateau fracture (30). The wound was revised but no cause was found. Due to persistent drainage, a second revision was done and this time on opening the suprapatellar recess, two small pieces of cement was found which were not visible in the postoperative radiographs. After removal of these loose bodies, healing progressed normally. Cement remaining in the soft tissue can also be a cause of persistent postoperative pain. Kopylov et al. in their study on

The Role of Bone Graft Substitutes & 13

the use of injectable calcium phosphate cement in distal radius fractures had two patients who appeared to have more postoperative pain in the wrist. In both the cases, cement was found in the soft tissue (28). Although both calcium phosphate and calcium sulfate have good biocompatibility, several reports of inﬂammation with their use exist (31,32). Calcium sulfate appears to induce an inﬂammatory reaction to a lesser degree than calcium phosphate.

& SURGICAL TECHNIQUES Whether the calcium cement is to be used to augment a distal radius fracture or ﬁll a bone lesion, the general technique is the same. Preparation of the cement should be done according to the manufacturers’ speciﬁc recommendations. Different formulations of the ceramic cements have different mixing and injection times; therefore, it is important that the scrub nurse/technician is familiar with the system. The surgical setup, equipments, instruments, implants, and initial portion of the surgical procedure are done as they would be normally. Distal radius fractures are reduced and stabilized, and bone lesions are curettaged, as needed. The bony defect can then be accessed through the surgical incision or percutaneously with a delivery needle. An image intensiﬁer can be used to conﬁrm that the needle is within the void. Saline is irrigated through the needle to evacuate any hematoma. Injection is begun by docking the syringe onto the preplaced needle and backﬁlling the defect. The needle is slowly withdrawn as ﬁll is achieved. Image intensiﬁcation is used to ensure that the void is completely ﬁlled. Excess material outside of the defect is removed, after which the injected material is allowed to solidify without

disturbance. After the material has harden, light irrigation is performed and closure is done per routine.

& CASE EXAMPLE A 43-year-old right-hand dominant male sustained an intraarticular left wrist fracture (Fig. 1). Notable in the history was that he receives hemodialysis (HD) through an arteriovenous shunt in the ipsilateral arm (Fig. 2). Operative stabilization was recommended because of the articular depression and the fact that immobilization of the wrist would preclude use of the shunt for HD. A minimally invasive technique was chosen to minimize postoperative swelling and avoid tourniquet use in that arm. The articular step-off was reduced by use of an elevator through the cortical window in the radial styloid (Fig. 3). After placement of the MICRONAIL (Fig. 4), percutaneous injection of calcium phosphate cement (Norian SRS; Synthes, Paoli, Pennsylvania, U.S.A.) into the metaphyseal bony defect was performed to provide addition support of the articular surface (Fig. 5). Postoperatively, the patient was able to get HD through the arm on the following day because no immobilization was required (Fig. 6).

& OUTCOMES & Distal Radius Fracture Few clinical studies exist regarding the role of calcium cements in the treatment of acute distal radius fractures and those that displaced after conservative management. Cassidy et al.

FIGURE 1 Posterior–anterior and lateral radiographs of the intra-articular distal radius fracture of the patient. Source: Courtesy of Virak Tan, MD.

14 & Azad et al.

FIGURE 2 Clinical photograph of a hemodialysis patient who sustained a distal radius fracture in the ispilateral wrist. Source: Courtesy of Virak Tan, MD.

performed a prospective, randomized multicenter study to evaluate closed reduction and immobilization with and without calcium phosphate cement (Norian SRS) in the management of distal radial fractures (33). A total of 323

FIGURE 3 Reduction of the articular depression with an elevator placed through the cortical window at the radial styloid. Source: Courtesy of Virak Tan, MD.

patients with a distal radial fracture were randomized to a treatment group consisting of a closed reduction and Norian SRS, and a control group consisting of a closed reduction and application of a cast or external ﬁxator. In the treatment group, wrist motion was encouraged beginning two weeks postoperatively while in the control group, the ﬁxator or cast was continued for six to eight weeks. Signiﬁcant clinical differences were seen at six and eight weeks postoperatively resulting in better grip strength, wrist range of motion, digital motion, use of the hand, and social and emotional function, with less swelling in the patients treated with Norian SRS than in the control group. By three months, there were no signiﬁcant differences except for digital motion, which remained signiﬁcantly better in the group treated with Norian SRS. At one year, no clinical differences were detected. Radiographically at six to eight weeks, both groups were equivalent with the exception of the change in ulnar variance, which was higher in the treatment group (2.2 mm compared with 1.5 mm) (33). Similar results were reported by Kopylov et al. in a randomized study on failed conservative treatment of distal radius fractures or redisplaced distal radius fractures (34). The study compared calcium phosphate cement followed by cast immobilization with external ﬁxator alone. Sanchez-Sotelo et al. performed a prospective, randomized study on 110 patients older than 50 years with distal radius fractures to compare the outcome of conservative treatment to implantation of moldable bone cement and immobilization in a cast for two weeks (35). The authors reported that patients treated with Norian SRS had less pain and earlier restoration of movement and grip strength. Satisfactory results were demonstrated in 82% of the Norian SRS patients and 55% of the control group. The rates of malunion were 18% and 42%, respectively. Soft-tissue extrusion was present initially in 69% of the Norian SRS patients decreasing to 33% at one year. Zimmermann et al. performed a prospective study on 52 menopausal, osteoporotic women with unstable intra-articular distal radius fractures to compare the outcome of percutaneous pinning and immobilization in a cast for six weeks to the use of injectable calcium phosphate bone cement (Norian SRS) to supplement pin and screw ﬁxation with immobilization in a cast for three weeks (36). All patients were reviewed on average two years (range 21–29 months) after surgery. The authors reported that patients treated with Norian SRS had better functional outcome, restoration of movement, and grip strength. In the treatment group, there was a 1-mm loss of radial length, a 38 loss of radial inclination and a 78 loss of palmar tilt. In the control group, the radial length decreased by 3 mm, radial inclination decreased by 118, and palmar tilts by 128. Loss of reduction was signiﬁcantly higher in the control group compared with the treatment group. In a preliminary report, Jupiter et al. reported their results on the percutaneous use of injectable calcium phosphate cement (Norian SRS) in ﬁve patients with distal radius fracture (29). The purpose of the study was to evaluate the feasibility of Norian SRS bone cement injected percutaneously into a distal radius following reduction in preventing loss of reduction as well as safety. All fractures were reduced under regional or general anesthesia and the cement was introduced via a catheter system into the metaphyseal defect of the fracture. A short arm cast was applied and remained in place for six weeks. Prospective follow-up at 12 months showed an average loss of !1 mm; radial angle maintained at an average of 25.48; and volar angle was within the normal range (0–218) in four patients while one patient had a dorsal angle of 78. Wrist motion improved 50% between six weeks and three months and improved further by 12 months when grip strength reached a

The Role of Bone Graft Substitutes & 15

FIGURE 4 MICRONAIL ﬁxation. Source: Courtesy of Virak Tan, MD.

mean of 88% of the contralateral side. Dorsal and volar extrusion of injected cement in four patients resorbed over time. There were no clinically signiﬁcant adverse effects or complications. The authors concluded that cement proved to be clinically safe and effective as a cancellous bone cement to maintain fracture reduction of unstable extra-articular distal radius fractures. In an unpublished series, Paige (37) augmented 15 patients who underwent internal ﬁxation of unstable distal radial fractures with injectable calcium sulfate bone graft due to dorsal fragmentation and an associated metaphyseal bone void. All patients had prospective evaluation using the patient-rated wrist evaluation (PRWE) form at a minimum of 3 months and again at 6 and 12 months after ﬁxation. The fractures united within 6 to 12 weeks with restoration of anatomical position in a high percentage. The return to functional activities was highlighted by improvement in the PRWE Scores. In summary, the author concluded that volar

locking plate ﬁxation may beneﬁt for bone graft substitute augmentation for the more complex, unstable fracture patterns.

& Bone Lesions Injectable ceramic bone cements provide a suitable bone-ﬁlling material for cystic lesions since it can be used with minimal trauma to the thin cortical shell around the lesions and also provides immediate structural support. Few clinical studies exist regarding the use of injectable calcium phosphate bone cements in the management of bone lesions. Joosten et al. reported a one-year prospective study of eight patients with enchondroma who were treated with calcium phosphate cement (BoneSource, Howmedica, Rutherford, New Jersey, U.S.A.) without ﬁxation (38). All patients had a full functional recovery without any complications. In another study, Yasuda et al. reported 10 patients with digital enchondroma (six proximal phalanges, two middle phalanges, and two

FIGURE 5 Calcium phosphate bone graft substitute cement was injected percutaneously into the metaphyseal defect. The cement appears as a radiodense material on ﬂuoroscopic images. Source: Courtesy of Virak Tan, MD.

16 & Azad et al.

FIGURE 6 A postoperative clinical photograph showing the incisions for the minimally invasive techniques of distal radius fracture ﬁxation and bone substitute cement placement. There is minimal swelling in the wrist even in this early postoperative time. Source: Courtesy of Virak Tan, MD.

metacarpal bones) treated with an injectable calcium phosphate bone cement after curettage of the lesions through a small cortical window (39). No postoperative splint was used and only a bulky dressing was applied. One week after surgery, range of motion exercises were started. Serial radiographs were used to evaluate bony incorporation and absorption of cement. Incorporation of cement (deﬁned by authors as a seamless change of radiographic appearance and no gap between cancellous bone and cement) occurred at an average of 4.5 months (range 3–6.1 months) after surgery. All patients had full range of motion after surgery. All but one patient returned to their ordinary daily activities within four weeks of surgery (39). In another study, Gaasbeek et al. reported their results with use of plaster of Paris in 19 enchondromas of foot and hand in 19 patients. After thorough curettage of enchondroma lesions, sterile plaster of Paris tablets were used to ﬁll the cavities. After a mean follow-up of 53 months (range 15–139 months), the mean functional Musculoskeletal Tumor Society Score was reported as 29.1 points (97%; range 28–30) and no local recurrence was seen. The authors concluded that plaster of Paris appears safe and effective as a bone-ﬁlling substance after curettage of enchondroma (40).

& SUMMARY Ceramic-based synthetic bone graft substitutes, which include calcium phosphate and calcium sulfate, have undergone

signiﬁcant development in the past decade. These bone graft substitutes offer several distinct advantages over autograft and other groups of bone graft substitutes. Though autograft is still the gold standard in bone grafting, signiﬁcant number of disadvantages exists. The ceramic cements fulﬁll many of the requirements of an ideal bone graft yet overcome several disadvantages of autograft as well. Because autologous bone does not need to be harvested, by deﬁnition these bioceramic substitutes are “minimally invasive.” In recent years, minimally invasive technologies and techniques have revolutionized many types of surgeries. The injectable calcium phosphate and calcium sulfate-based ceramic bone graft substitutes are one more addition to the armamentarium of minimally invasive orthopedic surgery. Injectable cements are generally used as an adjunct to internal ﬁxation for the treatment of fractures or as bone void ﬁllers. The cements harden endothermically which limits tissue damage while developing a compressive strength intermediate between cortical and cancellous bone. A number of studies have been done to evaluate injectable cements in clinical situations including trauma such as distal radius fractures, tibial plateau fractures, calcaneous fractures, and vertebroplasty, and benign bone lesions such as enchondromas. However, further studies need to be conducted to evaluate the role of injectable calcium sulfate and calcium phosphate cements in the management of bone cysts in the hand and forearm. As new data from preclinical and clinical studies accumulate, the clinical uses of these bone graft substitutes will be expanded and enhanced. Most studies in general have shown positive results with the use of these substitutes. However, disadvantages do exist for these bone graft substitutes. The cements are known to lack osteogenic or osteoinductive potential and exhibit poor strength under sheer stress. Inﬂammatory reactions to loose bodies in the joints can complicate their use in a small percentage of patients. Besides these clinical limitations, one practical pitfall which prevents their widespread use is the high cost of injectable cements.

& SUMMATION POINTS

Indications & & & &

Distal radius fractures with metaphyseal comminution Simple bone cysts Aneurysmal bone cysts Enchondromas

Outcomes & &

Less pain Earlier restoration of movement and grip strength

Disadvantages & & & &

Lack osteogenic or osteoinductive potential Poor strength under sheer stress Extrusion into soft_tissue and joint space may cause inﬂammatory reactions in a small percentage of patients High cost

& REFERENCES 1.

Kahn B. Superior gluteal artery laceration, a complication of iliac bone graft surgery. Clin Orthop Relat Res 1979; 140:204–7.

The Role of Bone Graft Substitutes & 17 2. Lotem M, Maor P, Haimoff H, et al. Lumbar hernia at an iliac bone graft donor site. A case report. Clin Orthop Relat Res 1971; 80:130–2. 3. Fowler BL, Dall BE, Rowe DE. Complications associated with harvesting autogenous iliac bone graft. Am J Orthop 1995; 24(12):895–903. 4. Gupta AR. Perioperative and long-term complications of iliac crest bone graft harvesting for spinal surgery: a quantitative review of the literature. Int Med J 2001; 8(3):163–6. 5. Kurz LT, Garﬁn SR, Booth RE, Jr. Harvesting autogenous iliac bone grafts. A review of complications and techniques. Spine 1989; 14(12):1324–31. 6. Arrington ED, Smith, WJ, Chambers, HG, et al. Complications of iliac crest bone graft harvesting. Clin Orthop Relat Res 1996; 329:300–9. 7. Kuhne JH, Bartl R, Frisch B, et al. Bone formation in coralline hydroxyapatite. Effects of pore size studied in rabbits. Acta Orthop Scand 1994; 65(3):246–52. 8. Eggli PS, Muller W, Schenk RK. Porous hydroxyapatite and tricalcium phosphate cylinders with two different pore size ranges implanted in the cancellous bone of rabbits. A comparative histomorphometric and histologic study of bony ingrowth and implant substitution. Clin Orthop Relat Res 1988; 232:127–38. 9. Nakahara H, Goldberg VM, Caplan AI. Culture-expanded periosteal-derived cells exhibit osteochondrogenic potential in porous calcium phosphate ceramics in vivo. Clin Orthop Relat Res 1992; 276:291–8. 10. Klein CP, Driessen AA, de Groot K, et al. Biodegradation behavior of various calcium phosphate materials in bone tissue. J Biomed Mater Res 1983; 17(5):769–84. 11. Frayssinet P, Trouillet JL, Rouquet N, et al. Osseointegration of macroporous calcium phosphate ceramics having a different chemical composition. Biomaterials 1993; 14(6):423–9. 12. Termine JD, Peckauskas RA, Posner AS. Calcium phosphate formation in vitro. II. Effects of environment on amorphous–crystalline transformation. Arch Biochem Biophys 1970; 140(2):318–25. 13. Laurencin CT, ed. Bone Graft Substitutes. West Conshohocken: ASTM International, 2003:281–99. 14. Wiltfang J, Merten HA, Schlegel KA, et al. Degradation characteristics of alpha and beta tri-calcium-phosphate (TCP) in minipigs. J Biomed Mater Res 2002; 63(2):115–21. 15. Brown, WaC, LC, Dental restorative cement pastes. American Dental Association Health Foundation: U.S. 1985. 16. Takagi S, Chow LC. Formation of macropores in calcium phosphate cement implants. J Mater Sci Mater Med 2001; 12(2):135–9. 17. Welch RD, Zhang H, Bronson DG. Experimental tibial plateau fractures augmented with calcium phosphate cement or autologous bone graft. J Bone Joint Surg Am 2003; 85-A(2):222–31. 18. Sarkar MR, Wachter N, Palka P, et al. First histological observations on the incorporation of a novel calcium phosphate bone substitute material in human cancellous bone. J Biomed Mater Res 2001; 58(3):329–34. 19. Dressmann H. Ueber knochenplombierung bei hohlenformigen defekten des knochens. Beitr Klin Chir 1892; 9:804–10. 20. Peltier LF. The use of plaster of paris to ﬁll large defects in bone. Am J Surg 1959; 97(3):311–5. 21. Peltier LF, Jones RH. Treatment of unicameral bone cysts by curettage and packing with plaster-of-Paris pellets. J Bone Joint Surg Am 1978; 60(6):820–2.

22. Pietrzak WS, Ronk R. Calcium sulfate bone void ﬁller: a review and a look ahead. J Craniofac Surg 2000; 11(4):327–33 (discussion 334). 23. Bucholz RW. Nonallograft osteoconductive bone graft substitutes. Clin Orthop Relat Res 2002; 395:44–52. 24. Damien CJ, Parsons JR. Bone graft and bone graft substitutes: a review of current technology and applications. J Appl Biomater 1991; 2(3):187–208. 25. Rosenblum SF, Frenkel S, Ricci JR, et al. Diffusion of ﬁbroblast growth factor from a plaster of Paris carrier. J Appl Biomater 1993; 4(1):67–72. 26. Cesari C, Gatto MR, Malucclli F, et al. Periodontal growth factors and tissue carriers: biocompatibility and mitogenic efﬁcacy in vitro. J Biomed Mater Res B Appl Biomater 2006; 76(1):15–25. 27. Constantz BR, Ison IC, Fulmer MT, et al. Skeletal repair by in situ formation of the mineral phase of bone. Science 1995; 267(5205):1796–9. 28. Kopylov P, Jonsson K, Thorngren KG, et al. Injectable calcium phosphate in the treatment of distal radial fractures. J Hand Surg [Br] 1996; 21(6):768–71. 29. Jupiter JB, Winters S, Sigman S, et al. Repair of ﬁve distal radius fractures with an investigational cancellous bone cement: a preliminary report. J Orthop Trauma 1997; 11(2):110–6. 30. Lobenhoffer P, Gerich T, Witte F, et al. Use of an injectable calcium phosphate bone cement in the treatment of tibial plateau fractures: a prospective study of twenty-six cases with twenty-month mean follow-up. J Orthop Trauma 2002; 16(3):143–9. 31. Flautre B, Delecourt C, Blary MC, et al. Volume effect on biological properties of a calcium phosphate hydraulic cement: experimental study in sheep. Bone 1999; 25(Suppl. 2):35S–9. 32. Robinson D, Alk D, Sandbank J, et al. Inﬂammatory reactions associated with a calcium sulfate bone substitute. Ann Transplant 1999; 4(3–4):91–7. 33. Cassidy C, Jupiter JB, Cohen M, et al. Norian SRS cement compared with conventional ﬁxation in distal radial fractures. A randomized study. J Bone Joint Surg Am 2003; 85-A(11):2127–37. 34. Kopylov P, Runnqvist K, Jonsson K, et al. Norian SRS versus external ﬁxation in redisplaced distal radial fractures. A randomized study in 40 patients. Acta Orthop Scand 1999; 70(1):1–5. 35. Sanchez-Sotelo J, Munuera L, Madero R. Treatment of fractures of the distal radius with a remodellable bone cement: a prospective, randomised study using Norian SRS. J Bone Joint Surg Br 2000; 82(6):856–63. 36. Zimmermann R, Gabl M, Lutz M, et al. Injectable calcium phosphate bone cement Norian SRS for the treatment of intra-articular compression fractures of the distal radius in osteoporotic women. Arch Orthop Trauma Surg 2003; 123(1):22–7. 37. Joosten U, Joist A, Frebel T. The use of an in situ curing hydroxyapatite cement as an alternative to bone graft following removal of enchondroma of the hand. J Hand Surg [Br] 2000; 25(3):288–91. 38. Paige R. Distal radial fracture augmentation with injectable bone graft sustitute—The Geelong Experience. 2006: Melbourne, Australia (personal communications). 39. Yasuda M, Masada K, Takeuchi E. Treatment of enchondroma of the hand with injectable calcium phosphate bone cement. J Hand Surg [Am] 2006; 31(1):98–102. 40. Gaasbeek RD, Rijnberg WJ, van Loon CJ, et al. No local recurrence of enchondroma after curettage and plaster ﬁlling. Arch Orthop Trauma Surg 2005; 125(1):42–5.

4 Bioabsorbable Implants in Hand and Wrist Surgery Mark L. Kavanagh, Regis L. Renard, and John T. Capo

Department of Orthopedics, The New Jersey Medical School, University of Medicine and Dentistry of New Jersey, Newark, New Jersey, U.S.A.

& INTRODUCTION

& IMPLANT PROPERTIES

Metal implant devices have a long, reliable clinical history, are relatively cheap, and easy to produce and shape. These implants used in hand and wrist surgery also have their disadvantages. Large differences between Young’s moduli of the implants and bone often lead to stress shielding resulting in osteopenia which may result in pathologic fractures (1). In addition, elevated stress concentration at the junction of the implants and the host bone may result in periprosthetic fractures. Implantation of metallic devices often requires signiﬁcant soft tissue stripping which reduces the local blood supply about the implant. This effect is constant during the entire time the implant is in place. Metallic devices also have the potential for corrosion and wear and debris formation with subsequent metallosis (2). Prominent or protruding metallic hardware may interfere with surrounding tissues that disturb joint movement, tendon gliding, or even cause tendon ruptures resulting in pain and loss of function. This effect is particularly important around the hand and wrist. Often times these implants need to be removed. Stern et al. (3) and Berman et al. (2) have reported a need for plate removal in 25% of cases of metacarpal and proximal phalangeal fractures. An ideal implant would ensure adequate bone ﬁxation, transfer increasing load to bone, not affect skeletal growth, and need not be removed. Bioresorbable implants can avoid problems associated with metal implants, such as stress shielding, corrosion, wear and debris formation, and the need for implant removal (4).

Degradation of implants manifest as implant fragmentation, strength loss, and reduction of polymer molecular weight (6–9). Degradation of these implants in vivo proceeds via a bulk hydrolysis of ester bonds that are present in the polymer chain. These materials degrade to monomeric acids and eventually to carbon dioxide and water that are removed from the body via respiratory routes and kidneys during Krebs cycle. Physical factors that affect tissue response to implants include implant shape, physical structure, mass of the implant, stress at the implantation site, and micromotion at the implant–tissue interface (4). Clinically large bulky implants with fast degrading polymers can cause a larger inﬂammatory reaction when compared with smaller implants with slowly degrading polymers. The earliest resorbable implants were made from polyglycolic acid (PGA), but this material is relatively hydrophilic and highly crystalline and will degrade and lose its strength very rapidly in the body. It may also give rise to ﬂuid accumulation and sterile sinus formation. This material is no longer used in orthopedic ﬁxation devices. Today, copolymerization can be used to create implants with different ratios of monomers (D and L monomers) to alter the chemical and physical properties (4,10). The L isomer of polylactide (PLLA) is the material found in most orthopedic implants used today. This isomer has a high degree of crystallinity and is more resistant to hydrolysis. A pure PLLA remains detectable for between 18 months and 4 years in vivo. The D isomer (PDLLA) is amorphous and provides less tensile strength. It promotes resorption of the implants over a longer period of time. Currently, bioabsorbable implants are available in a variety of plates, screws, and smooth pins (Figs. 1–3).

& EVOLUTION OF IMPLANTS During the last few decades, the interest in safe, reliable resorbable implants has steadily increased. The ﬁrst application of this technology came with the use of bioresorbable polymers in sutures, such as Dexon (US Surgical, Norwalk, Connecticut, U.S.A.) and Vicryl (Ethicon, Somerville, New Jersey, U.S.A.). There are now resorbable implants designed for trauma surgery, including pins, screws, plates, dowels, anchors, and membranes. Bioresorbable implants must meet several biological and technical requirements (4). They must not induce adverse inﬂammatory or foreign body reactions. The implants must not be carcinogenic, mutagenic, or teratogenic, must not cause allergic, hypersensitive, or toxic responses, and must not activate the complement system (5). Resorbable implants need to maintain adequate mechanical properties in vivo for the desired time and degrade at an effective rate required for bone healing. Mechanical properties are determined by the conditions of polymer synthesis, the processing of materials into implants, and by the sterilization process of implants.

& PROCESSING AND STERILIZATION Self-reinforcing (SR) manufacturing technique enables the processing of bioabsorbable polymers into high strength, high-modulus implants (9,11–13). A high degree of molecular orientation makes the self-reinforced implants stiff and strong in the direction of their long axis, which increases the mechanical strength, modulus, and toughness of the implants. The bending modulus of SR devices is close to that of cortical bone (10–17 GPa), which is important for bone healing (12,14,15). The high bending modulus of metallic implants (100–250 GPa) leads to stress shielding in the bone in loaded areas (13). SR implants also have better handling properties. SR plates can be bent with pliers to conform to the bone at room temperature without signiﬁcant loss of strength.

20 & Kavanagh et al.

FIGURE 1 Two different sized plates and a bioresorbable screw from the ReUnitee set (EBI, Parisippany, New Jersey, U.S.A.). These implants are manufactured from a copolymer of 82% L-lactic acid and 18% glycolic acid. Source: Courtesy of John T. Capo, MD.

FIGURE 3 The ReUnite set contains a variety of metal drill bits, taps, implant insertion instruments, and depth gauges.

& EXPERIMENTAL STUDIES & Animal Investigations Problems can occur with sterilization of these implants (16,17). High-energy irradiation causes extensive degradation and loss of mechanical properties. Ethylene oxide sterilization does not practically affect mechanical and molecular properties of the implants but there are concerns about residues and environmental problems (17). Newer sterilization techniques now include the use of gamma irradiation due to the potential risks of toxic residues remaining after ethylene oxide sterilization (16).

FIGURE 2 A ReUnite screw and smooth pin. The screw head attachment is seen. This hex-shaped end ﬁts into the screwdriver and is sheared off when the screw is fully seated. Source: Courtesy of John T. Capo, MD.

Viljanen et al. (14) studied the changes that occur in bones after experimental osteotomies were ﬁxed with absorbable 4.5mm SR-PLLA screws and 4.5-mm metallic screws the distal femur in rabbits. They found that at 36 weeks, there was a signiﬁcantly increased amount of external callus with the metallic ﬁxation group when compared with the SR-PLLA group. However, cortical bone mineral density was decreased in the metallic ﬁxation group at both 6 and 36 weeks. Magnetic resonance imagings showed edema surrounding the screws in both groups, however, the size of the edematous zones was signiﬁcantly decreased in the SR-PLLA group. The authors felt that the SR-PLLA ﬁxation method resulted in more rapid and improved healing due to the physiologic elasticity of these implants when compared with the metal screws. The resorbable implants appeared to prevent stress protection atrophy and weakening of the ﬁxed bone secondary to osteoporosis. Joukainen et al. (11) studied the strength retention of 2.0mm SR-PLA 70/30 rods and ﬁxation properties of these implants in rat distal femur osteotomies. In addition, 70 absorbable rods were implanted into the dorsal subcutaneous tissue of 16 rats and three point bending and shear tests were performed after these animals were killed. At 52 weeks, the shear strength and ﬂexural modulus was 41% of their initial value and the ﬂexural strength was 43% of its initial value. Osteotomies in the distal femur were ﬁxed with rods in 39 rats. Macroscopic and X-ray analysis showed that 23 out of 32 subjects (72%) have solid union at the osteotomy site. These authors felt that the mechanical strength and ﬁxation properties of the resorbable rods were adequate for ﬁxation of osteotomies in cancellous bone in rats.

Bioabsorbable Implants in Hand and Wrist Surgery & 21

& Human Investigations Pihlajamaki et al. (18) examined the use of SR-PLLA absorbable pins in the ﬁxation of fractures and osteotomies in humans. They reviewed 27 patients with fractures or osteotomies that were treated with internal ﬁxation using bioabsorbable pins. Patients had small fragment fractures and osteotomies of the hand, foot, elbow, and patella. The authors used 1.5- or 2.0-mm cylindrical rods composed of SR-PLLA. There were no wound infections or inﬂammatory foreign body reactions noted. No redisplacement occurred in any of the patients and the materials were absorbed within two years. Computed tomography scans were obtained in three patients at 15 and 37 months and showed that the pins were no longer visible but no new bone had formed within the drilled channels.

much easier. A bioabsorbable plate is applied dorsally to the tension side of the metacarpal. The ReUnitee (EBI, Parisippany, New Jersey, U.S.A.) set has malleable templates available to size and assess the contour of the necessary plate (Fig. 6). The screw holes are drilled and the threads are tapped with metal instruments. The bioabsorbable screws are individually wrapped sterile and come attached to an insertion rod ﬁxed to the head. They are inserted with the appropriate screw driver and the insertion rod is sheared off

(A)

& INDICATIONS Although the literature has yet to clearly elucidate deﬁnitive indications for the use of bioabsorbable implants, there are speciﬁc times when the use of these implants can be beneﬁcial. In the hand and wrist, there is little soft tissue coverage and the use of a bulky metal implant can be problematic. Using resorbable implants in these cases could be advantageous to minimize ﬁnal hardware prominence and to avoid a second operation to remove these implants (1,3,19–26). When metal implants are removed, unﬁlled holes can provide a stress riser for a fracture. As bioabsorbable implants slowly degrade, the surrounding bone is able to ﬁll in such defects. The use of metal implants around the tendons and joints in the hands and wrist can also pose potential problems. Bioresorbable implants pose less of a problem with encroachment on a tendon or the joint capsule. If a small portion of the implant is within the joint or impinging on a tendon, this difﬁculty will be alleviated as the implant resorbs. There are also other times in which a bioabsorbable implant is not an appropriate choice. If the patient has an active infection, the use of any type of implant should be avoided as this would provide a nidus for persistent infection. At this point in time, complex articular fractures that need rigid ﬁxation in order to prevent displacement and to ensure anatomic articular alignment, should be ﬁxed with the more traditional metal implants (5).

(B)

& SPECIFIC IMPLANTS USED IN FIXATION OF FRACTURES & Metacarpal Shaft Fractures

Surgical Technique

The typical injury is usually a displaced index or middle ﬁnger metacarpal fracture in a slender and young individual (Fig. 4). Anesthesia can be performed locally, via regional blockade, or general anesthesia as per surgeon preference. The hand is prepped and draped in standard fashion. A longitudinal dorsal incision should be made over the metacarpal fracture site. The extensor tendon is protected and retracted and the juncturae tendinae are divided if necessary. The overlying periosteum and interosseus muscle are elevated as a ﬂap. The fracture surfaces are identiﬁed and fracture ends prepared in standard fashion (Fig. 5A). To improve fracture stability while still keeping the hardware low-proﬁle, we often prefer to place a metal interfragmentary screw ﬁrst (Fig. 5B). This also makes placement of the plate

FIGURE 4 (A) Anterior–posterior radiograph demonstrating a second metacarpal shaft fracture with shortening and displacement. (B) Lateral view shows unacceptable angulation of the fracture. Source: Courtesy of John T. Capo, MD.

22 & Kavanagh et al. (A)

(B)

FIGURE 5 (A) Exposure of a mid-shaft second metacarpal fracture through a longitudinal incision. The periosteum and muscle fascia are elevated as a ﬂap. The patient is a 17-year-old boy and this is his dominant hand. (B) The fracture is ﬁrst stabilized with a tenaculum and then provisionally ﬁxed with 1.3-mm titanium screw in a lag fashion. Source: Courtesy of John T. Capo, MD.

as the screw is seated (Fig. 7). The ﬁnal few turns typically achieve a solid bite, but care must be taken not to overtighten the screws as the head can be sheared off. The heads may be ﬂattened somewhat with an electrocaughtery instrument included in the set that melts the material. The periosteum and muscle fascia are closed over the plates to avoid any early tendon impingement (Fig. 8).

Outcomes

Waris et al. (22) compared bioabsorbable miniplating versus metallic ﬁxation for metacarpal fractures, using fresh frozen second metacarpals from cadavers. He tested three point bending and torsional loading after transverse osteotomies were ﬁxed with a variety of methods, including SR-PLLAPGA 80/20 plating, SR-poly-L /DL -lactide 70/30 plating,

FIGURE 6 A trialing template is placed over the dorsum of the metacarpal to approximate the length of the plate required. Source: Courtesy of John T. Capo, MD.

Bioabsorbable Implants in Hand and Wrist Surgery & 23

FIGURE 7 The resorbable implant is placed dorsally and ﬁxed proximally and distally with two screws. Source: Courtesy of John T. Capo, MD.

titanium plating, and Kirschner (K)-wire ﬁxation. In apex dorsal and palmar bending, dorsal SR-PLLA-PGA 80/20 plating, and SR-poly-L/DL-lactide 70/30 plating provided stability comparable with dorsal titanium 1.7-mm plating. The rigidity and maximum bending moment of 2.0-mm dorsal bioabsorbable plates were higher than those of K-wires. Overall, he found that low proﬁle SR-PLLA-PGA and SR-poly-L/DL-lactide miniplates provide satisfactory biomechanical stability for metacarpal ﬁxation.

& PHALANGEAL FRACTURES AND INTERPHALANGEAL JOINT ARTHRODESIS & Surgical Technique

Fracture Fixation

The phalangeal fractures are reduced in a standard fashion and percutaneous pinning is typically performed. With most bioabsorbable pins, a hole needs to be ﬁrst drilled with a metallic pin. The resorbable rod is then placed into this tract with an insertion device. The insertion device pushes the rod along the hole drilled by the K-wire. This requires rigid stability of the fracture fragments to avoid malalignment of the K-wire path. This at times can be difﬁcult. Recently a new resorbable pin, Trim-It Drill Pine (Acumed, Beaverton, Oregon, U.S.A.) has been introduced that avoids this. The pin has an attached metal tip that allows it to be drilled directly into the bone. The metal tip can be cut off on the far side of the bone when possible or can be left on the inner side of the medullary canal to avoid migration.

& Outcomes Jensen and Jensen (26) investigated poly-p-dioxanone (PPD) pins in phalangeal fracture ﬁxation, arthodesis, and osteotomies versus standard K-wires. Their case series compared 11 patients with biodegradable pin devices [four open reduction and internal ﬁxation (ORIF), ﬁve arthrodeses, and two osteotomies] to 12 patients (three ORIF and nine arthrodeses) instrumented with K-wires followed over six months. In the fracture-ﬁxation group, the authors reported an earlier return to normal range of motion using the resorbable implants. One out of the four patients with PPD pins required reoperation secondary to loss of ﬁxation. All of the K-wire fracture ﬁxations required additional procedures for hardware removal. Patients treated with PPD arthodeses had two failures of fusion (40%) and one required re-fusion while the second received an amputation. This is greater than the frequency of failed fusions noted in the K-wire group (22%). One pin tract infection was noted in the PPD arthodesis group versus two pin tract infections in the K-wire group. Thirteen additional procedures were needed to remove the K-wires. This study is promising, but it contains small patient numbers and had a follow-up time of only six months. Interphalangeal joint arthrodesis utilizing PLLA rods was investigated by Arata and colleagues (27). This case series of 15 distal interphalangeal joints and one interphalangeal joint of the thumb had a follow up of two to 25 months. Successful fusion was noted in all joints by eight weeks. Two patients developed painless localized swelling. No cases of infection, nonunion, or deformity were noted. The authors concluded that PLLA rods can be safely used for interphalangeal fusions.

& Arthrodesis The distal interphalangeal joint is approached through a dorsal Y- or H-type incision. The extensor tendon is divided and the collateral ligaments are elevated. The articular surfaces are removed with a rongeur. Next, the intramedullary canals of the distal and proximal phalanxes are drilled utilizing a drill-bit that is 0.5-mm larger in diameter than the bioabsorbable rod. This is followed by reaming the canals to the size of the implant. The bioabsorbable rod is inserted anterograde into the distal phalanx medullary space. The distal phalanx and intramedullary placed rod is then reduced to the middle phalanx in a retrograde fashion. The extensor tendon, collateral ligaments, and skin are then sutured in standard fashion and the ﬁnger is splinted.

& SCAPHOID FRACTURES AND NONUNIONS & Surgical Technique The following surgical technique will focus on percutaneous ﬁxation of scaphoid fractures from a volar approach. For more comminuted or displaced fractures, an open technique is more appropriate. The patient is positioned supine and the upper extremity is placed on a standard hand table and a miniﬂuoroscopy machine is used to visualize the scaphoid. The wrist is placed over a small towel bump to induce wrist extension. The volar retrograde approach is our preferred entry site for percutaneous ﬁxation of scaphoid fractures.

24 & Kavanagh et al. (A)

ray. The guide pin must be in the center of the scaphoid in all views. Provisional ﬁxation can be obtained with a K-wire, however, it should not interfere with the desired screw location. A small 3 to 4 mm incision should be made at the screw starting point. The drill is then inserted and driven by hand or power. Care should be taken not to overdrill the proximal fragment. If the fragments are unstable or the drill is inducing rotation, a second pin can be placed outside the center of the scaphoid to stabilize the bone. Next, the screw is placed to the exact depth desired. Length should be accurate to ensure that the screw is buried at least 2 mm on both the proximal and distal ends. The goal is to keep the alignment, induce bone healing, and stabilize the entire scaphoid. Typically, one nylon stitch is all that is needed and a thumb spica splint is placed on the extremity.

Currently Available Implants

(B)

There are currently two bioabsorbable screws for scaphoid ﬁxation available on the market. Biocomposites, Inc. (Staffordshire, U.K.) makes a product called the Little Grafter and is available for the ﬁxation of scaphoid and various other small bone fractures. It is a 4-mm screw available in a size range of 17 to 27 mm. It can be inserted in a percutaneous method or through an open approach. It is osteoconductive and provides a bioactive scaffold for new bone growth. Arthrex, Inc. (Naples, Florida, U.S.A.) makes a biocompression screw that is also available for ﬁxation of scaphoid fractures. The screw is headless, absorbable and can be inserted either through an open or percutaneous technique (Figs. 9–11). The company recommends inserting the screw from a dorsal approach in an antegrade fashion. The screw is only available in one length with 3.7-mm proximal diameter and 2.7-mm distal diameter. It is composed of a PLLA polymer.

& OUTCOMES Bailey et al. (28) studied the biomechanical properties of a new composite bioresorbable screw in a bone model produced from rigid polyurethane. These authors used a bioresorbable cannulated screw composed of PLLA and hydroxyapatite. The study evaluated interfragmentary compression generated by this screw compared with four conventional metal screws. The mean maximum compression forces for the resorbable screw, the Asnis, and Acutrak screws were comparable and no statistical difference was found. The compression forces of the

FIGURE 8 Postoperative X-rays show near anatomic alignment of the metacarpal fracture in the (A) anterior–posterior and (B) lateral views. Source: Courtesy of John T. Capo, MD.

The position of the guidewire and ﬁnal screw is crucial to the success of the procedure. For retrograde insertion, we have found that drilling through the volar corner of the trapezium usually gives the appropriate starting point. The angle is ulnar and dorsal approximately 458 and follows the line of the thumb

FIGURE 9 The biocompression screw from Arthrex Corporation (Naples, Florida, U.S.A.). It has a conical shape and a variable pitch screw thread. Source: Photo courtesy of Arthrex Corporation.

Bioabsorbable Implants in Hand and Wrist Surgery & 25

Green-O’Brien wrist score, results were graded as excellent in one case, good in four cases, and poor in the single case of nonunion.

& REPAIR OF ULNAR COLLATERAL LIGAMENT TEARS & Surgical Technique

FIGURE 10 Anterior–posterior view of a proximal third scaphoid fracture with unacceptable displacement. Source: Photo courtesy of Arthrex Corporation.

Herbert and Herbert-Whipple screws were signiﬁcantly lower (Herbert 21.8 and Herbert-Whipple 19.9N, Zimmer, Warsaw, Indiana, U.S.A.). The study showed that these bioresorbable screws have good compressive ﬁxation when compared with commonly used small fragment metallic screws. Kujala et al. (29) examined the treatment of scaphoid fractures and nonunions using bioabsorbable screws. In his study, there were a total of six patients with scaphoid waist fractures (3) or nonunions (3) that were all treated using bioabsorbable SR-PLLA screws. Interposition of a bone graft from the iliac crest was used in four cases. A solid union was achieved in ﬁve cases. The single nonunion was in a previously operated wrist. No infections developed in any of the patients. Using the Mayo-modiﬁed

FIGURE 11 Postoperative radiograph of scaphoid fracture stabilized with a resorbable biocompression screw. Source: Photo courtesy of Arthrex Corporation.

A lazy S-shaped incision is typically used over the dorsal ulnar aspect of the thumb metacarpophalangeal (MCP) joint. Care should be taken to protect the terminal branches of the superﬁcial radial nerve. The adductor aponeurosis should be incised sharply and the ulnar collateral ligament (UCL) should be identiﬁed on or beneath it. Often a Stener lesion is present and the ligament rests superﬁcial to the aponeurosis. Most UCL ruptures occur distally. If the ligament is ruptured distally, a tunnel should be drilled in the proximal phalanx that is perpendicular to the axis of the ﬁnger. This tunnel should be approximately 3 to 4 mm from the MCP joint and should be appropriately sized for the tack being used for repair. Once the tunnel is drilled a 1.1-mm diameter K-wire is used to create a hole in the ligament approximately 3 to 4 mm from its torn end. Next, a bioabsorbable tack should be placed through the ruptured ligament. Once this tack is in place and through the ligament, it should be introduced into the tunnel created in the proximal phalanx. The top of the tack should be pressed tightly against the ligament and cortex. Alternatively, a suture may be attached to the ligament end and then attached to the anchor which is inserted into the drill hole (Figs. 12 and 13). If the ruptured occurred proximally, the previous steps would

FIGURE 12 A nonabsorbable suture is used to hold the ligament end with a grasping technique. The suture is placed through the anchor approximately 3 mm from the ligament end.

26 & Kavanagh et al.

remained visible at six years. Avascular necrosis with signs of collapse in the subchondral bone occurred in one patient and minor redisplacement (1–2 mm) occurred in another patient. Foreign body reactions occurred in 6.3% of patients. None of these reactions were associated with an infection. Superﬁcial wound infections occurred in 3.2% of patients. These infections healed completely after treatment with antibiotics and none occurred in patients with osteolytic lesions. There was no correlation found between transient osteolysis and foreign body reaction or infection. Bostman (32) reported on adverse tissue reactions to bioabsorbable ﬁxation devices in 2528 patients operated on using pins, rods, bolts, and screws made of PGA or PLA. A clinically signiﬁcant local inﬂammatory, sterile soft tissue reaction was seen in 108 (4.3%) of the cases. In 107 patients, the reaction was due to a PGA implant (5.3% of 2037 patients) occurring at an average of 11 weeks postimplantation. In four patients, a severe reaction, which caused extensive osteolytic lesions in the implant tracks, occurred with subsequent arthrodesis of the wrist or ankle due to severe osteoarthritis. Only one patient had a reaction due to a PLA implant (0.2% of 491 patients) 4.3 years after surgery. FIGURE 13 The anchor is then inserted into the drill hole bringing the ligament in opposition to the bone surface. The free ends of the sutures may be used to reinforce the repair.

be reversed and a tunnel would be drilled in the metacarpal head approximately 3 to 4 mm from the joint and the ligament would be secured with a tack into the metacarpal head.

& Currently Available Implants Arthrex, Inc. has a system of bioabsorbable anchors (V-Take and Mini V-Take, Arthrex, Naples, Florida, U.S.A.) for small joint ligamentous repair. The anchors are available with 2–0 sized nonresorbable sutures and range in sizes of 2.2 mm! 4 mm or 2.2 mm!7 mm. The anchors are made from proprietarily prepared poly(L-lactide-co-D,L-lactide) acid.

& Outcomes Vihtonen et al. (24) examined the use of an absorbable SR-PLLA tack for the repair of ruptured UCLs in ﬁrst MCP joints. This study has a total of 70 patients with total avulsion of UCL. The authors were able to achieve good or satisfactory results in 66 of the patients. One patient developed a local infection at nine months postoperatively and the tack was removed, and one patient had persistent pain in the scar and required an additional surgery. After reoperation, this patient had normal function without pain.

& COMPLICATIONS & Adverse Reactions to Self-Absorbable Implants There are reports in the literature of infrequent occurrences of ﬂuid accumulation and/or sinus formation associated with local pain, redness, and swelling (8,27,30–32). These are mainly related to older generation of implants made of polyglycolide. Pelto-Vasenius et al. (31) described osteolytic changes that occurred after PGA ﬁxation in chevron osteotomies in metatarsal heads. Postoperative osteolytic changes occurred in 22% (21 out of 94) of patients. At ﬁnal follow-up, 16 out of 21 patients with osteolysis had complete resolution and 4 had partial resolution. In one patient, the osteolytic changes

& SUMMARY Using bioabsorbable implants to treat fractures of the hand is of special interest because the applied mechanical stresses are relatively low and subsequent surgical removal of traditional metallic hardware can be avoided. Modern SR manufacturing techniques allow bioabsorbable devices for osteoﬁxation that possess high strength, formability with controlled degradation, and offer a useful option to treat small bone fractures of the hand. Resorbable pins and screws are being increasingly used in the treatment of fractures and osteotomies of the extremities, including metacarpal, phalangeal, and scaphoid bones. Early data suggest that bioabsorbable implants have similar clinical success as metal implants, and can be used effectively to treat fractures in the hand and wrist. Bioresorbable implants are ideal as they ensure adequate bone ﬁxation, transfer increasing load to bone, do not affect skeletal growth, and do not need to be removed. These implants also avoid problems associated with metal devices, such as stress shielding, corrosion, wear and debris formation. Reported complication rates are low, but include sterile sinus tract formation, osteolysis, synovitis, and hypertropic ﬁbrous encapsulation. Currently, further clinical studies are needed in order to determine in which speciﬁc situations these implants have the best indications.

& REFERENCES 1. 2. 3. 4. 5.

Fitoussi F, Lu W, Ip WY, Chow SP. Biomechanical properties of absorbable implants in ﬁnger fractures. J Hand Surg [Br] 1998; 23:79–83. Berman KS, Rothkopf DM, Shufﬂebarger JV, Silverman R. Internal ﬁxation of phalangeal fractures using titanium miniplates. Ann Plast Surg 1999; 42:408–10. Stern PJ, Wieser MJ, Reilly DG. Complications of plate ﬁxation in the hand skeleton. Clin Orthop Relat Res 1987; 214:59–65. Bostman O, Pihlajamaki H. Clinical biocompatibility of biodegradable orthopaedic implants for internal ﬁxation: a review. Biomaterials 2000; 21:2615–21. Tegnander A, Engebretsen L, Bergh K, Eide E, Holen KJ, Iversen OJ. Activation of the complement system and adverse effects of biodegradable pins of polylactic acid (Bioﬁx) in osteochondritis dissecans. Acta Orthop Scand 1994; 65:472–5.

Bioabsorbable Implants in Hand and Wrist Surgery & 27 6. Bostman OM, Paivarinta U, Partio E, et al. The tissue–implant interface during degradation of absorbable polyglycolide fracture ﬁxation screws in the rabbit femur. Clin Orthop Relat Res 1992; 285:263–72. 7. Bostman O, Paivarinta U, Partio E, et al. Absorbable polyglycolide screws in internal ﬁxation of femoral osteotomies in rabbits. Acta Orthop Scand 1991; 62:587–91. 8. Bostman OM, Laitinen OM, Tynninen O, Salminen ST, Pihlajamaki HK. Tissue restoration after resorption of polyglycolide and poly-laevo-lactic acid screws. J Bone Joint Surg Br 2005; 87:1575–80. 9. Partio EK, Bostman O, Hirvensalo E, et al. Self-reinforced absorbable screws in the ﬁxation of displaced ankle fractures: a prospective clinical study of 152 patients. J Orthop Trauma 1992; 6:209–15. 10. Vance RJ, Miller DC, Thapa A, Haberstroh KM, Webster TJ. Decreased ﬁbroblast cell density on chemically degraded polylactic-co-glycolic acid, polyurethane, and polycaprolactone. Biomaterials 2004; 25:2095–103. 11. Joukainen A, Pihlajamaki H, Makela EA, et al. Strength retention of self-reinforced drawn poly-L/DL-lactide 70/30 (SR-PLA70) rods and ﬁxation properties of distal femoral osteotomies with these rods. An experimental study on rats. J Biomater Sci Polym Ed 2000; 11:1411–28. 12. Rubel IF, Seligson D, Lai JL, Voor MJ, Wang M. Pullout strengths of self-reinforced poly-L-lactide (SR-PLLA) rods versus Kirschner wires in bovine femur. J Orthop Trauma 2001; 15:429–32. 13. Prevel CD, Eppley BL, Ge J, et al. A comparative biomechanical analysis of resorbable rigid ﬁxation versus titanium rigid ﬁxation of metacarpal fractures. Ann Plast Surg 1996; 37:377–85. 14. Viljanen J, Kinnunen J, Bondestam S, Majola A, Rokkanen P, Tormala P. Bone changes after experimental osteotomies ﬁxed with absorbable self-reinforced poly-L-lactide screws or metallic screws studied by plain radiographs, quantitative computed tomography and magnetic resonance imaging. Biomaterials 1995; 16:1353–8. 15. Viljanen J, Pihlajamaki H, Kinnunen J, Bondestam S, Rokkanen P. Comparison of absorbable poly-L-lactide and metallic intramedullary rods in the ﬁxation of femoral shaft osteotomies: an experimental study in rabbits. J Orthop Sci 2001; 6:160–6. 16. Kobayashi H, Shiraki K, Ikada Y. Toxicity test of biodegradable polymers by implantation in rabbit cornea. J Biomed Mater Res 1992; 26:1463–76. 17. Ekholm M, Helander P, Hietanen J, et al. A histological and immunohistochemical study of tissue reactions to solid poly(ortho ester) in rabbits. Int J Oral Maxillofac Surg 2006; 35:631–5. 18. Pihlajamaki H, Bostman O, Hirvensalo E, Tormala P, Rokkanen P. Absorbable pins of self-reinforced poly-L-lactic

19. 20. 21.

22. 23. 24.

25.

26. 27.

28. 29.

30. 31. 32.

acid for ﬁxation of fractures and osteotomies. J Bone Joint Surg Br 1992; 74:853–7. Voche P, Merle M, Membre H, Fockens W. Bioabsorbable rods and pins for ﬁxation of metacarpophalangeal arthrodesis of the thumb. J Hand Surg [Am] 1995; 20:1032–6. Voutilainen N, Juutilainen T, Patiala H, Rokkanen P. Arthrodesis of the wrist with bioabsorbable ﬁxation in patients with rheumatoid arthritis. J Hand Surg [Br] 2002; 27:563–7. Voutilainen NH, Patiala HV, Juutilainen TJ, Rokkanen PU. Longterm results of wrist arthrodeses ﬁxed with self-reinforced polylevolactic acid implants in patients with rheumatoid arthritis. Scand J Rheumatol 2001; 30:149–53. Waris E, Ashammakhi N, Happonen H, et al. Bioabsorbable miniplating versus metallic ﬁxation for metacarpal fractures. Clin Orthop Relat Res 2003; 410:310–9. Waris E, Konttinen YT. On the use of Lactosorb plate for ﬁxation of a metacarpal shaft fracture. Ann Plast Surg 2004; 52:111–2. Vihtonen K, Juutilainen T, Patiala H, Rokkanen P, Tormala P. Reinsertion of the ruptured ulnar collateral ligament of the metacarpophalangeal joint with an absorbable self-reinforced polylactide tack. J Hand Surg [Br] 1993; 18:200–3. Pelto-Vasenius K, Hirvensalo E, Bostman O, Rokkanen P. Fixation of scaphoid delayed union and non-union with absorbable polyglycolide pin or Herbert screw. Consolidation and functional results. Arch Orthop Trauma Surg 1995; 114:347–51. Jensen CH, Jensen CM. Biodegradable pins versus Kirschner wires in hand surgery. J Hand Surg [Br] 1996; 21:507–10. Arata J, Ishikawa K, Soeda H, Kitayama T. Arthrodesis of the distal interphalangeal joint using a bioabsorbable rod as an intramedullary nail. Scand J Plast Reconstr Surg Hand Surg 2003; 37:228–31. Bailey CA, Kuiper JH, Kelly CP. Biomechanical evaluation of a new composite bioresorbable screw. J Hand Surg [Br] 2006; 31:208–12. Kujala S, Raatikainen T, Kaarela O, Ashammakhi N, Ryhanen J. Successful treatment of scaphoid fractures and nonunions using bioabsorbable screws: report of six cases. J Hand Surg [Am] 2004; 29:68–73. Bostman O, Partio E, Hirvensalo E, Rokkanen P. Foreign-body reactions to polyglycolide screws. Observations in 24/216 malleolar fracture cases. Acta Orthop Scand 1992; 63:173–6. Pelto-Vasenius K, Hirvensalo E, Vasenius J, Rokkanen P. Osteolytic changes after polyglycolide pin ﬁxation in chevron osteotomy. Foot Ankle Int 1997; 18:21–5. Bostman OM, Pihlajamaki HK. Adverse tissue reactions to bioabsorbable ﬁxation devices. Clin Orthop Relat Res 2000; 371:216–27.

5 Use of Cannulated Screws in Hand and Wrist Surgery Drew Engles

Summit Hand Center, Crystal Clinic, Inc., Akron, Ohio, U.S.A.

& INTRODUCTION

& Pitch

Recent advances in instrument and imaging technology have revolutionized how hand surgeons treat the entire spectrum of upper extremity ailments and injuries. Many of these previously daunting conditions are now amenable to minimally invasive techniques. Minimally invasive surgery has long been the purview of orthopedic surgeons. Arthroscopic procedures predated most endoscopic advances in the other surgical disciplines. Additionally, the use of cannulated screws has been prevalent for decades (1). More recently upper extremity surgeons have applied these techniques, either alone or in combination to address injuries and disorders speciﬁc to the hand and carpus. This chapter deals speciﬁcally with concepts critical to the appropriate application of cannulated screw technology in upper extremity surgery. Obviously, any technique has speciﬁc indications as well as limitations. At times these limitations are a function of the human anatomy and the biological properties of its components. For instance there are obvious biomechanical differences between cancellous bone and cortical bone. There also exist age related constraints when injuries are adjacent to epiphyseal or physeal structures. Finally the implant or its delivery system may preclude its utilization in certain situations. Advances in imaging technology have coincided with these breakthroughs in upper extremity care. Speciﬁcally, small scale low-intensity ﬂuoroscopy systems, with direct digital conversion capability can provide excellent osseous imaging. The availability of this high resolution ﬂuoroscopy has helped support the wide spread implementation of these orthopedic advances.

The distance between two points on adjacent thread forms measured parallel to the screw axis and on the same side of that axis.

& BASICS OF SCREW CONFIGURATION To optimally utilize cannulated screws in hand and wrist surgery, one should have a working knowledge of screw design and geometry. Many of the variables in screw geometry affect their biomechanical properties and inﬂuence their clinical performance and their application. The basic terminology of screw geometry and conﬁguration are provided here for review (Fig. 1).

& Major Diameter The diameter of the crests of an external straight thread measured orthogonal to the screw axis.

& Minor Diameter The diameter of the roots of an external straight thread measured orthogonal to the screw axis.

& Thread Length The distance measured from where the thread pattern begins to where it terminates measured parallel to the axis of the screw.

& Thread Depth The distance between the crest of an external straight thread and the root of an external straight thread measured orthogonal to the axis of the screw axis and on the same side of that axis.

& Shaft Length The distance from the base of the head to the tip of the screw measured parallel to the axis of the screw. This nomenclature becomes extremely important when comparing the mechanical properties of different screw designs.

& MECHANICAL PROPERTIES OF SCREWS The mechanical properties of screws are a direct function of both their material composition and their geometric design. Several reproducible methods are available to study these properties. Using this knowledge a design team can optimize those characteristics which will be most advantageous for the intended application of the device. The mechanical characteristics most applicable to the orthopedic clinician are pullout strength, torsion to failure, stripping torque, bending strength, and compressive force (2,3). The ﬁrst four properties are important in that they quantify under what applied loads screws fail. Pullout strength quantiﬁes at what maximum load a screw dissociates from the material into which it has been inserted. Torsion to failure typically is performed inserting a screw into a material of greater strength and with a ﬁnite depth and then applying a torque to the screw until it fails. Typically the maximum torque achieved before failure and the site of failure are recorded for comparison (2). Stripping torque refers to the maximum torque applied prior to the screw stripping out of the material into which it was inserted (2). Bending measures the deformation of a screw as an outside load is applied. Several different types of bending studies can be performed. They include three point bending, four point bending, and cantilevered bending. The data collected yield a stress/strain curve. Information garnered from this curve includes yield point, stiffness, and ultimate strength. The yield point signiﬁes the point at which permanent deformation of the material or implant occurs. The ultimate

30 & Engles

Shaft length Major dia Thread length

Pitch Minor dia FIGURE 1 Computer Aided Design (CAD) diagram of a cannulated screw. Source: Courtesy of OrthoHelix Surgical Designs, Inc.

strength is the maximal load that the screw can withstand before breakage. Material fatigue can be determined by cyclically loading the implant until failure (or a predetermined degree of deformation occurs) (4). Compressive force measurements allow for analysis of compression that a screw is able to produce with in a given substance. Some studies utilize cadaveric bone while others utilize synthetic bone substitute because of its reproducibility, lower cost, and availability. Multiple authors have shown that synthetic bone is satisfactory for simulating real bone in biomechanical experiments. In some instances, its homogeneity makes it more suitable for certain experimental designs.

& BIOMECHANICAL EVALUATION OF CANNULATED SCREWS The biomechanical evaluation of screws is of importance in that it allows the design engineer to study how permutations in screw geometry and material composition affect screw function. The following discussion provides a review of biomechanical analyses regarding various properties of cannulated screws. In 1991, Dr James Shaw studied the biomechanical properties of four different screws (5). This was actually a follow-up study to his original paper which evaluated the Herbert screw (6). In this second paper, he compared the compressive forces generated in a simulated bone model using a custom designed load cell. The four screws studied were the Herbert screw (Zimmer), the Herbert/Whipple cannulated screw, the Arbeitsgemeinschaft ﬁir Osteosynthesfragen/Association for the Study of Internal Fixation (AO/ASIF) 4-mm cancellous screw (Synthes), and the AO/ASIF 3.5-mm cannulated screw (Synthes). He found that the Herbert/Whipple cannulated screw and the AO/ASIF cancellous screw were able to generate comparable compression which was almost ﬁve times that of the Herbert screw. The AO/ASIF 3.5-mm cannulated screw was able to generate a compressive force nearly 2.5 times that of the Herbert screw. In addition to these compression studies, Carter and colleagues evaluated bending properties of several screws.

Speciﬁcally, they studied the bending rigidity, and the bending moment at failure, for experimental scaphoid osteotomies that were ﬁxated with a pair of parallel placed 0.045-inch Kirschner (K) wires, a Herbert screw or an AO/ASIF 3.5-mm cannulated screw. They found that, when compared to the K-wires on a matched pair basis, both screws were statistically stronger in resisting bending forces (7). In 1997, Toby and colleagues noted that the Herbert screw remained a popular choice for scaphoid ﬁxation, despite the reports that it possessed less compressive force and pull-out strength than other screws. They therefore elected to study Herbert screw performance, with respect to ramped intensity cyclical bending loads, when compared to four other commercially available cannulated screws (8). These screws included the Herbert/Whipple screw, the AO/ASIF 3.5-mm cannulated screw, the Acutrak cannulated screw (Acumed), and the Universal compression screw (Howmedica). They found that the AO/ASIF, Acutrak and Herbert/Whipple screws all fared better at withstanding ramped cyclical bending forces than did the Herbert screw. The AO/ASIF and Universal compression screws provided the most stable constructs. However, the Universal compression screw did have a propensity for fracturing bone at the insertion site of the scaphoid (2 out of 6 trials). The test was then extended to evaluate the AO/ASIF screw and the Herbert screw under the same parameters but with a segment of the volar cortex removed from the scaphoid. With this alteration, both screws showed a signiﬁcant decrease in ability to withstand ramped cyclical bending forces. A subsequent study, comparing the Acutrak cannulated screw, an AO/ASIF 4-mm cancellous screw, and the Herbert screw was performed (9). This study once again showed both the Acutrak and the AO/ASIF screws to have superior characteristics than the Herbert screw with respect to fragment compression in both synthetic and cadaveric bone. When compared to the AO/ASIF screw, the Acutrak screw was able to maintain better compression after cyclical loading and it was able to maintain fragment contact at higher levels of torque. In 2000, Brown and colleagues published a study evaluating solid and cannulated screws (3). They measured the mechanical characteristics of ﬁve screws from three separate manufacturers. Their ﬁndings supported the prior work of Chapman where thread length, major diameter, and thread shape factor were correlated to pull-out strength (10). In fact, their predicted pull-out strength correlated to observed pull-out strength with an r2 value of 0.90. They used the equation developed by Shigley for their stripping torque calculations (11). Furthermore, they reported that, in both theoretical models and in actual mechanical testing, cannulation alone did not inherently impair 4.0-mm screw mechanical function. The adjunctive use of a threaded washer with the AO/ASIF 3-mm cannulated screw was studied by Lo and colleagues in 2001 (12). They felt that the 3-mm cannulated screw, used in conjunction with the threaded washer, provided compression similar to that previously described by Rankin for 3.5-mm cannulated and solid screws (6). More recently several authors have looked into the biomechanical properties of smaller diameter (2 and 3 mm) cannulated screws. Kissel and colleagues studied the pull-out strength of 2-, 2.4-, and 3-mm Osteomed cannulated and solid screws as well as 2-, 2.5-, 3-mm Vilex cannulated screws (13). In the 2-mm group, there were no statistical differences in the pullout strength comparing cannulated and solid devices. In the 2.4/2.5-mm subset, the cannulated screws had signiﬁcantly (P!.05) higher pull-out strengths than their noncannulated counterparts. The cannulated Osteomed screw revealed a

Use of Cannulated Screws in Hand and Wrist Surgery & 31

signiﬁcantly (P!.05) greater pull-out strength than the other two 3-mm devices. The most recent analysis of smaller diameter cannulated screws evaluated the AO/ASIF 3-mm cannulated cancellous screw (in conjunction with a threaded washer), the AO/ASIF 2-mm cortical screw, the Mini-Acutrak screw and the Herbert/Whipple screw (14). Compressive forces were measured in a synthetic bone model. The 3-mm AO/ASIF screw generated the most compression, nearly twice that of the 2-mm screws. The Mini-Acutrak (Acumed) and Herbert/ Whipple screws were found to generate similar compression, which was approximately 70% of that of the 3-mm cancellous cannulated screw. The authors pointed out that, despite its small diameter, the Mini-Acutrak screw was equivalent in compression strength to the Herbert/Whipple and within 30% of that of the 3-mm cannulated cancellous screw and threaded washer combination. Careful review of these studies provides sufﬁcient scientiﬁc evidence for the use of the latest generation of cannulated screws with the conﬁdence that they possess sufﬁcient strength and provide adequate compression for hand surgery applications.

& TECHNICAL CONSIDERATIONS IN CANNULATED SCREW PLACEMENT The use of cannulated screws has several advantages over solid screws. First, guide pins can be inserted and then their position veriﬁed by ﬂuoroscopic techniques before drilling (Fig. 2). This then allows for more precision in the use of the drill, typically with a single pass and thus with less chance for errant passes and potential loss of bone stock. Secondly, the screw is then placed over the guide pin and the potential for angular mismatch between the implant and the far cortex or subchondral resting site is obviated. Thirdly, screw length can be determined by measuring off of the guide wire whose length and position have already been ﬂuoroscopically determined. Additionally, the guide pin offers a precise ﬁt between the screwdriver and screw head even in deeper tissues where visualization may be limited. From a physiologic stand point, cannulated screws can often be placed percutaneously or through a limited incision. This decreases tissue trauma, periosteal stripping, and potential Cannulated screw

Guide wire/ k-wire

dead space creation. One would hypothesize that this decreases the degree of scar formation, preserves blood supply to fracture fragments, and reduces the potential for hematoma formation. With respect to fracture reduction, the guide pin itself can provide provisional ﬁxation. Additional dissection for clamp or tenaculum placement may be avoided. With the placement of a second guide pin, rotational control can be obtained. If the fracture fragment is too small to accommodate a second screw, the guide pin can be left in place as either a temporary or potentially permanent implant. This concept is often used in the treatment of radial styloid fractures (15). In using cannulated screws several concepts are important to maintain. It is imperative that reduction be obtained prior to guide wire placement. The addition of a second pin, even temporarily, to augment reduction and prevent rotation, is often required for optimal management of the fracture. When measuring off of the guide pin, for screw length, it is important to take into account not only counter sinking of the head, when necessary, but also anticipated compression. If the screw size selected abuts subchondral bone on the distal side of the far fragment and then signiﬁcant fragment compression is achieved, the screw tip may eventually rest in either the articular cartilage or within the joint space. It is often of beneﬁt to advance the guide pin slightly after the screw length measurement has been taken. This will prevent drilling beyond the guide pin and accidentally extracting it upon removal of the drill. In some cannulated screw systems, a stylet is provided which is help to prevent inadvertent guide pin removal during removal of the cannulated drill bit. It is also important that the drill be passed parallel to the guide pin, if too much cantilevering occurs during drilling there is the risk of pin breakage deep within the bone. These pin fragments are often difﬁcult to retrieve. There is also the risk of pin bending or breakage during manipulation. The potential for this is discussed by Shin and Hofmeister in their description of percutaneous scaphoid ﬁxation via a volar approach (16). They speciﬁcally recommended the standard Acutrak screw because of its stouter guide wire.

& CLINICAL APPLICATIONS The developments in cannulated screw technology, especially those of small diameter screws, have allowed for a greater application of their use in hand and wrist surgery. While initially utilized primarily in scaphoid ﬁxation, cannulated screws are now used at the digital, metacarpal, and carpal levels. Percutaneous and limited open techniques, often combined with arthroscopic technology, have revolutionized how many traumatic conditions are now treated (17,18). The following discussion is an overview of techniques utilizing cannulated screws for minimally invasive surgery of the hand and wrist. As many of these techniques are described in more exhaustive detail in the following chapters, the nuances will be left for discussion by other authors, many who are experts and pioneers in these very procedures.

& Interphalangeal Arthrodesis

FIGURE 2 Computer Aided Design (CAD) diagram of cannulated screw and guide wire relationship. Source: Courtesy of OrthoHelix Surgical Designs, Inc.

In the distal phalanx, cannulated screws can be utilized for arthrodesis of the distal interphalangeal (DIP) joint (19). However, because of the small diameter of both the middle and distal phalanges and the relatively tight soft tissue envelope, care must be employed in both patient and implant selection. Speciﬁcally, other techniques may be better suited for patients with diminutive hands or when the small digit is being

32 & Engles

fused. Brutus and colleagues found a 15% nonunion rate and 37% complication rate (20). All nail bed injuries were seen in the small digit. This compares to a 12% nonunion rate and 20% major complication rate published by Stern and Fulton for DIP arthrodesis using noncannulated techniques (20). With these ﬁndings in mind, careful patient and implant selection is required to optimize results. As smaller implants continue to be developed, it will be interesting to see if outcomes improve. In larger caliber digits, this author has used the AO/ASIF 3-mm cannulated screw with good results (Fig. 3). The interphalangeal joint of the thumb is particularly amenable to this technique. The typically greater ratio of the middle phalanx to distal phalanx intramedullary diameter of the thumb makes this implant, with its increased major diameter to minor diameter ratio, well suited for this application. A few technical considerations are worthy of discussion. First, screw ﬁxation limits the amount of ﬂexion that can be imparted on the distal joint. Typically, joints are fused in neutral posture and it is difﬁcult to achieve much more than 108 to 158 of ﬂexion due to the geometric constraints of screw diameter and length within the intramedullary cavity. Second, care must be taken not to violate the dorsal cortex of the distal phalanx as this may lead to nail bed injury. Finally, if a headless screw is not utilized, the head must be countersunk into the tuft to avoid symptomatic hardware.

(A)

(B)

FIGURE 3 (A) A posteroanterior radiograph of a thumb IP joint fusion utilizing an AO/ASIF 3-mm cannulated screw. (B) Lateral radiographic image of a thumb IP joint fusion. Abbreviation: IP, interphalangeal.

To date, no authors have published their results regarding proximal interphalangeal (PIP) arthrodesis with cannulated screws. Leibovic and Strickland compared their results with Herbert screws to other ﬁxation methods (21). They found a more favorable outcome with Herbert compression screws as opposed to K-wires or tension band techniques. It remains to be seen if cannulated screws can provide similar results.

& Metacarpophalangeal Joint Arthrodesis Several authors have published their experiences and result with cannulated screw ﬁxation for metacarpophalangeal (MCP) joint arthrodesis. In 2002, Messer and colleagues reported their experience with thumb MCP arthrodesis using the AO/ASIF 3-mm cannulated screw (22). A total of 18 thumbs were treated with this technique. Their union rate was an impressive 100%. The also had no major complications. Two patients underwent screw removal for hardware discomfort. A later study of 26 patients utilizing the same implant in conjunction with a threaded washer revealed a 96% union rate (23). Other than the single nonunion, no other major complications were reported. Both studies found cannulated screw ﬁxation for thumb MCP arthrodesis a satisfactory alternative to other techniques.

& Scaphoid Fracture Fixation A plethora of studies exist detailing cannulated screw ﬁxation of scaphoid fractures. One study of particular interest is that of Trumble and colleagues (24). In this report Herbert/Whipple screws were compared to AO/ASIF 3-mm cannulated screws in the treatment of acute displaced fractures. They found no statistical difference in clinical and radiographic results between the two groups. Additionally, scaphoid alignment was improved and carpal collapse was decreased by either technique. They also evaluated screw placement with computerized tomography scans in both the sagittal and coronal planes. They noted that both techniques allowed for placement of the implant into the proximal fragment with satisfactory accuracy. More recent studies have evaluated percutaneous screw ﬁxation of scaphoid fractures either alone or in conjunction with arthroscopic assistance (17,18,25). This can be performed either via a dorsal or volar approach (Fig. 4). While the personality of the fracture may dictate the approach chosen, the bulk of these injuries are mid-waist fractures and are amenable to either anterograde or retrograde insertion. Thus often physician preference determines the technique employed. In a groundbreaking study, Bond and colleagues evaluated percutaneous screw ﬁxation as an alternative to cast immobilization for nondisplaced scaphoid fractures (26). Their prospective, randomized study of twenty-ﬁve active military patients evaluated with a minimum of two years follow-up found that the surgically treated group achieved radiographic union in a shorter period of time and a more rapid return to military duty. The average time to fracture union was seven weeks in those patients treated with cannulated screw ﬁxation as opposed to 12 weeks in the cast immobilization cohort. At the two-year follow up, there was no statistically signiﬁcant difference in range of motion or grip strength. Slade and Moore have extended the use of percutaneous cannulated screw ﬁxation for scaphoid fractures to now include unstable fractures, displaced fractures and ﬁbrous unions (25). They reported a 100% union rate, conﬁrmed by computerized tomography, in 50 scaphoid fractures. No complications were reported. Capo and Tan have also reported percutaneous

Use of Cannulated Screws in Hand and Wrist Surgery & 33 (A)

(B)

FIGURE 4 (A) Scaphoid ﬁxation utilizing a volar percutaneous retrograde ﬁxation technique. (B) A similar fracture treated via a dorsal approach and anterograde screw placement.

cannulated screw ﬁxation of selected scaphoid nonunions (27). This author has had similar experience utilizing the Acutrak screw for scaphoid fractures with delayed union or nonunion. Healing times are, however, typically longer than those of acute injuries.

& Carpal Injuries In addition to isolated scaphoid injuries, Slade has championed the percutaneous treatment of transscaphoid, transcapitate perilunate fracture dislocations (28). The rationale behind this approach is the desire to stabilize the carpal fractures with minimally invasive technology thus limiting soft tissue stripping, preserving carpal blood ﬂow, and allowing for a more rapid initiation of postoperative motion. In his technique, the scaphoid fracture is addressed with a dorsally placed headless compression screw and then the capitate is repaired with an identical implant using a percutaneous approach procedure from either the second or third web space. Anterograde placement of a cannulated screw in the scaphoid can be utilized in conjunction with lunotriquetral ligament repair or dorsal capsulodesis in transscaphoid perilunate fracture dislocations (Fig. 5).

capitolunate arthrodesis using either an arthroscopic or limited open approach (30). He reported the use of a headless compression screw (Acutrak) across the lunocapitate interval for ﬁxation. In his study, ten patients were treated via this technique; Five had an arthroscopic resection while the remainder had a limited open incision. At a minimum of 38-months follow up, all patients had satisfactory fusion based on computerized tomography scans. Nine patients were reported to be pain free and one had mild pain. All returned to their prior work and avocations. This author has utilized AO/ASIF 3-mm cannulated screws in conjunction with a corticocancellous bone graft for lunotriquetral fusion with satisfactory results. The screw can be placed percutaneously via an ulnar approach in combination with a limited open dorsal exposure.

& Intercarpal Arthrodesis Several authors have described the use of cannulated screws in intercarpal arthrodesis. Both percutaneous and open approaches have been utilized. Calandruccio and colleagues performed capitolunate arthrodesis in combination with scaphoid and triquetrum excision as treatment for scapholunate advanced collapse (SLAC) arthritis. Both cannulated and noncannulated screws were employed for ﬁxation of the capitolunate interface (29). These included Herbert, Herbert/ Whipple and AO/ASIF 3-mm cannulated screws. They did not specify which implant was used in each patient. They found their results similar to other procedures described for SLAC wrist arthritis but utilizing a technique necessitating fusion at only one site. Slade and Bomback have described percutaneous

FIGURE 5 A posteroanterior radiograph of a transscaphoid perilunate fracture dislocation repaired utilizing an anterograde cannulated screw for scaphoid ﬁxation and supplemental Kirschner (K) wire ﬁxation of the lunotriquetral ligament repair.

34 & Engles

& Distal Radius Fractures Cannulated screw technology is also applicable to distal radius fractures, particularly radial styloid fractures (Fig. 6). In these instances either limited open or arthroscopic techniques can be utilized (16). For Colles’ and Barton’s fractures plate ﬁxation is typically employed. However, if there is a concomitant radial styloid fracture this can be reinforced with a lag screw using either cannulated or noncannulated technology. If a cannulated system is employed in conjunction with plating one must be careful to insure that there is not a mismatch between the biomaterials. Arthroscopically assisted reduction allows for the precise reduction of the intra-articular components of the distal radius fracture. It also provides the additional beneﬁt of evaluation of the intercarpal ligaments. The surgeon must always have a high index of suspicion for additional carpal or ligamentous injuries in the face of a radial styloid fracture (31).

& Technical Alternatives Other options for skeletal ﬁxation in the hand and wrist include K-wires, small external ﬁxators, cerclage, intraosseous or tension band wiring, solid screws (with or without the use of plates), and bioabsorbable implants. With the exception of bioabsorbable implants, all of these methods are used routinely and successfully in the surgery of the hand and wrist. It is up to the individual surgeon to determine what combination of surgical technique and implant choice best ﬁts the fracture, the patient, and his or her level of experience. With respect to the use of solid screws, Motley and colleagues have described a technique in which solid screws are used with precision similar to that of cannulated screws (32). This is done by using a hybrid system in which components of the Synthes 4.5-mm cannulated screw, 7.3-mm cannulated screw, and 6.5-mm solid screw systems are utilized. They achieve their precision by ﬁrst placing a 1.6-mm threaded guide wire followed

(A)

by a 4.5 mm measuring device. An 8.5-mm tissue protector is then used for the remaining steps in which the guide pin is ﬁrst over drilled by a 3.2-mm cannulated drill bit. This is then followed by a 4.5-mm cannulated drill bit. The guide wire is then removed and a 6.5-mm solid screw is then placed via the guidance of the 8.5-mm tissue protector. They cited concern over cannulated screw strength as their main impetus for developing a system that could accurately deliver solid screws with the precision of a cannulated system. Bioabsorbable screws are also an alternative to cannulated metallic screws. Kujala and colleagues published their results using bioabsorbable screws in the treatment of scaphoid fractures and nonunions (33). They reported solid union in ﬁve out of six patients. They felt that this was a reasonable alternative to metallic screw ﬁxation. They did, however, point out that the screws once implanted were difﬁcult to see and that cannulated system would allow for more accurate screw placement under ﬂuoroscopic guidance.

& POTENTIAL COMPLICATIONS OF CANNULATED SCREW PLACEMENT As with the implantation of any device for surgery of the hand or upper extremity, there exist risks and potential complications. These include infection, nonunion, implant failure, implant migration, and damage to surrounding structures during surgical intervention. Additional complications associated with cannulated screw systems are often related to the guide wire. Schwend and colleagues reported a series of ﬁve instances where surgery was complicated by instrument breakage (34). In four instances, the guide pin was sheared off by the cannulated drill. In the remaining case the cannulated tap broke. In each case a 3.5-mm-diameter system was being utilized. Breakage of a cannulated screw at the head–neck interface, as can happen with solid screws, was reported by Mechan and Galindo (35). In another report,

(B)

FIGURE 6 (A) A posteroanterior radiograph of a radial styloid fracture repaired with cannulated screw technology. The fragment was large enough for placement of two screws thus insuring rotational stability. (B) Lateral radiographic view of the same fracture showing screw placement within the metaphysis.

Use of Cannulated Screws in Hand and Wrist Surgery & 35

Mooney and Simmons detailed a more unique failure of the cannulated screw (36). In three separate instances, during initial placement of a cannulated screw in the metaphyseal bone of adolescent patients, the threads dissociated from the shaft of the screw. In each case, the threads literally unraveled during insertion. In all three instances there was no appreciable tactile change to alert the surgeon to the compromise of the device.

& SUMMARY Cannulated screws are an effective tool in minimally invasive surgery of the hand and wrist. They often allow for stable ﬁxation while requiring only minimal surgical exposure and thus greater preservation of the soft tissue envelope. Biomechanical studies have shown them to be at least equivalent if not better than solid screws in many respects. Additionally, the ability to use these screws via percutaneous techniques has revolutionized the treatment of several injuries and disorders of the hand and carpus. The now widespread use of percutaneous cannulated screw ﬁxation for the treatment of scaphoid fractures is a testimony to this. Ensuing chapters in this book highlight the use of cannulated screws in speciﬁc instances and in much greater detail. The reader is directed to the accompanying list of references for a more in depth analysis of this topic. &

ACKNOWLEDGMENTS

The author would like to thank Ms Amanda Martin, Design Engineer at OrthoHelix Surgical Designs, Inc., for contributing the CAD diagrams which were used in this manuscript.

& REFERENCES 1. Laing PG. The use and care of metals. In: Bechtol CA, Ferguson AB, Laiing PG, eds. Metals and Engineering in Bone and Joint Surgery. Baltimore, MD: Williams & Wilkens, 1959:92–126. 2. Collinge CA, Stern S, Cordes S, et al. Mechanical properties of small fragment screws. Clin Orthop 2000; 373:277–84. 3. Brown GA, McCarthy T, Bourgeault CA, et al. Mechanical performance of standard and cannulated 4.0-mm cancellous bone screws. J Orthop Res 2000; 18(2):307–12. 4. Reese K, Litsky AS, Kaeding C, et al. Cannulated screw ﬁxation of Jones fractures: a clinical and biomechanical study. Am J Sports Med 2004; 32(7):1736–42. 5. Shaw JA. Biomechanical comparison of cannulated small bone screws: a brief follow-up study. J Hand Surg 1991; 16A(6):998–1001. 6. Shaw JA. A biomechanical comparison of scaphoid screws. J Hand Surg 1987; 16A:347–53. 7. Carter FM, Zimmerman C, DiPaola DM, et al. Biomechanical comparison of ﬁxation devices in experimental scaphoid osteotomies. J Hand Surg 1991; 16A(5):907–12. 8. Toby EB, Butler TE, McCormack TJ, et al. A comparison of ﬁxation screws for the scaphoid during application of cyclical bending loads. J Bone Joint Surg 1997; 79A(6):1190–7. 9. Wheeler DL, McLoughlin SW. Biomechanical assessment of compression screws. Clin Orthop 1998; 350:237–45. 10. Chapman JR, Harrington RM, Lee KM, et al. Factors affected the pullout strength of cancellous bone screws. J Biomech Eng 1996; 118:391–8. 11. Shigley JE. The design of screws, fasteners and connections. In: Shigley JE, ed. Mechanical Engineering Design. 3rd ed. New York: McGraw-Hill, 1977:227–73. 12. Lo IKY, King GJW, Patterson SD, et al. A biomechanical analysis of intrascaphoid compression using the 3.00 mm Synthes cannulated

13. 14. 15. 16. 17. 18. 19.

20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36.

screw and threaded washer: an in vitro cadaveric study. J Hand Surg 2001; 26B(1):22–4. Kissel CG, Friedersdorf SC, Foltz DS, et al. Comparison of pullout strength of small-diameter cannulated and solid core screws. J Foot Ankle Surg 2004; 42(6):334–8. Adla DC, Kitsis C, Miles AW. Compression forces generated by mini bone screws—a comparative study done on bone model. Injury 2005; 36:65–70. Putnam MD. Radial styloid fractures. In: Blair WF, ed. Techniques in Hand Surgery. Baltimore, MD: Williams & Wilkens, 1996:322–9. Shin AY, Hofmeister EP. Volar percutaneous ﬁxation of stable scaphoid fractures. Atlas Hand Clin 2003; 8:19–28. Yip HSF, Wu WC, Chang RYP, et al. Percutaneous cannulated screw ﬁxation of acute scaphoid waist fracture. J Hand Surg 2002; 27B(1):42–6. Slade JF, Gutow AP, Geissler WB. Percutaneous internal ﬁxation of scaphoid fractures via an arthroscopically assisted dorsal approach. J Bone Joint Surg 2002; 84A(Suppl. 2):21–36. Brutus J-P, Palmer AK, Mosher JF, et al. Use of headless compressive screw for distal interphalangeal joint arthrodesis in digits: clinical outcome and review of complications. J Hand Surg 2006; 31A(1):85–9. Stern PJ, Fulton DB. Distal interphalangeal joint arthrodesis: an analysis of complications. J Hand Surg 1992; 17A(6):1139–45. Leibovic SJ, Strickland JW. Arthrodesis of the proximal interphalangeal joint of the ﬁnger: comparison of the use of the Herbert screw with other ﬁxation methods. J Hand Surg 1994; 19A(2):181–8. Messer TM, Nagle DJ, Martinez AG. Thumb metacarpophalangeal joint arthrodesis using the AO 3.0-mm cannulated screw: surgical technique. J Hand Surg 2002; 27(5):910–2. Schmidt CC, Zimmer SM, Boles SD. Arthrodesis of the thumb metacarpophalangeal joint using a cannulated screw and threaded washer. J Hand Surg 2004; 29A(6):1044–50. Trumble TE, Gilbert M, Murray LW, et al. Displaced scaphoid fractures treated with open reduction and internal ﬁxation with a cannulated screw. J Bone Joint Surg 2000; 82A(5):633–41. Slade JF, Moore AE. Dorsal percutaneous ﬁxation of stable, unstable, and displaced scaphoid fractures and selected nonunions. Atlas Hand Clin 2003; 8:1–18. Bond CD, Shin AY, McBride MT, et al. Percutaneous screw ﬁxation or cast immobilization for nondisplaced scaphoid fractures. J Bone Joint Surg 2001; 83A(4):483–8. Capo JT, Tan V. Percutaneous ﬁxation repairs a scaphoid nonunion. Orthop Tech Rev 2004; 6(5). Slade JF, Moore AE. Percutaneous treatment of transscaphoid, transcapitate fracture-dislocations with arthroscopic assistance. Atlas Hand Clin 2003; 8:77–94. Calandruccio JH, Gelberman RH, Duncan SFM, et al. Capitolunate arthrodesis with scaphoid and triquetrum excision. J Hand Surg 2000; 25A(5):824–32. Slade JF, Bomback DA. Percutaneous capitolunate arthrodesis using arthroscopic or limited approach. Atlas Hand Clin 2003; 8:149–62. Helm RH, Tonkin MA. The chauffeur’s fracture: simple or complex? J Hand Surg 1992; 17B(2):156–9. Motley TM, Perry MD, Manoli A. Placement of solid screws with cannulated precision. J Surg Ortho Adv 2004; 13(3):177–9. Kujala S, Raatikainen T, Kaarela O, et al. Successful treatment of scaphoid fractures and nonunions using bioabsorbable screws: report of six cases. J Hand Surg 2004; 29A(1):68–73. Schwend RK, Hennrikus WL, O’Brien TJ, et al. Complications when using the cannulated 3.5 mm screw system. Orthopedics 1997; 20(3):221–3. Mechan ECR, Galindo E. Cannulated screw breaking in arthroscopic surgery of osteochondritis dissecans of the knee—a case report. Arthroscopy 1991; 7(1):108–10. Mooney JF, Simmons TW. A previously unreported complication of the AO cannulated 4.0- and 4.5-mm screw systems: a review of three cases. J South Ortho Assoc 2003; 12(3):160–2.

Part III: Minimally Invasive Techniques in the Phalanges and Metacarpals

6 Percutaneous Pinning of Phalangeal and Metacarpal Fractures Yi-Meng Yen

Steadman-Hawkins Clinic Vail, Vail, Colorado, U.S.A.

Roy A. Meals

Department of Orthopedic Surgery, David Geffen School of Medicine at UCLA, Los Angeles, California, U.S.A.

& INTRODUCTION Fractures of the metacarpals and phalanges are some of the most common injuries that are presented to the hand surgeon (1,2). Ten percent of all fractures occur in the metacarpals or phalanges and 80% of all hand fractures involve these bones (3,4). Until the early part of the twentieth century, these fractures were treated nonoperatively. Albin Lambotte in 1928 pioneered the work of operative ﬁxation for metacarpal fractures (5). Even today the majority of metacarpal and phalangeal fractures are treated conservatively. Those fractures that are nondisplaced or minimally displaced are inherently stable and require only nonsurgical management. Other fractures can be reduced in a closed manner and held in a cast or splint. The unstable fracture or dislocation, such as a transverse or oblique metacarpal or phalangeal shaft fracture, requires surgical ﬁxation to maintain alignment. Percutaneous pin ﬁxation of small bone fractures was ﬁrst pioneered by Tennant in 1924 using a phonograph needle. Kirschner described the use of small traction wires made from piano wire in 1927 (6,7). Bosworth reported using closed reduction and percutaneous pinning of ﬁfth metacarpal neck fractures with Kirschner (K) wires in 1937 (8). World War II created a vast opportunity for fracture stabilization. Bunnell and others used K-wires for various percutaneous ﬁxations in the hand (6). Vom Saal in 1953 reported his results after closed reduction and percutaneous ﬁxation of a variety of metacarpal and phalangeal fractures (9). Twenty years later, Green and Anderson described crossed K-wire ﬁxation of phalangeal fractures (10). Percutaneous ﬁxation can be applied to fractures of the hand because most bones have subcutaneous access for insertion of K-wires. Percutaneous techniques minimize the swelling and stiffness that may result from using plates or screws. Although percutaneous ﬁxation is not as rigid as plate or screw ﬁxation, increased rigidity may not be necessary when the hand is immobilized. Percutaneous pinning can be used with both closed and open reduction; however, this chapter will focus on the technique of closed reduction and percutaneous pinning of metacarpal and phalangeal fractures.

& INDICATIONS Operative indications for metacarpal or phalangeal fractures are for those fractures with instability after closed reduction,

malrotation, intra-articular fragments, bone loss, open injury and severe contamination, adjacent fractures, and also those with major soft tissue injury requiring reconstructive surgery. The choice of open reduction and ﬁxation with a screw or plate versus percutaneous ﬁxation depends upon the injury pattern and soft tissue coverage. Patients who have concomitant tendon injuries or those who require immediate motion generally beneﬁt from rigid internal ﬁxation, which allows early motion and gives better tendon gliding. Patients with fractures that have segmental bone loss or that are extensively comminuted also beneﬁt from rigid internal ﬁxation, although percutaneous external ﬁxation can be used. Inadequate closed reduction is a contraindication for percutaneous pin ﬁxation.

& Metacarpal Fractures Metacarpal head fractures are rare and generally involve the articular surface. They usually require open reduction, and K-wire ﬁxation may delay mobilization of the joint. Metacarpal neck fractures are quite common and consideration for closed reduction and percutaneous pinning depends upon the degree of angulation and which metacarpal neck is fractured. If the index and middle ﬁngers are fractured, residual angulation and volar prominence of the metacarpal head may adversely alter grip patterns, so near anatomic reduction is preferred. Although there is lack of consensus for small and ring ﬁnger metacarpal neck fractures, it is generally agreed that up to 408 of apexdorsal angulation is acceptable. Metacarpal shaft fractures are generally transverse, oblique, or spiral and can be simple or comminuted. Indications for closed reduction and percutaneous pinning are angulation greater than 308 for the small ﬁnger, 208 for the ring ﬁnger, and any angulation in the middle or index ﬁnger. Any visible malrotation of the ray or shortening of 5 mm are also indications for surgery. Metacarpal base fractures are rare in the second through fourth metacarpals but can be treated by percutaneous pinning. The so-called baby Bennett’s (ﬁfth metacarpal base) fracture tends to be unstable and closed reduction and percutaneous pinning can be considered. Additionally, the Bennett’s fracture (ﬁrst metacarpal base) can be treated with closed reduction and percutaneous pinning.

38 & Yen and Meals

& Phalangeal Fractures Indications for percutaneous pinning of phalangeal fractures are similar to metacarpal fractures. Shaft and condylar fractures that are unstable with closed reduction are amenable to percutaneous pinning. Long oblique and spiral oblique fractures that are initially in an acceptable position are relative indications for percutaneous pinning since these fractures can displace despite immobilization.

& PREOPERATIVE PLANNING A thorough history is taken paying particular attention to the mechanism of injury. The preoperative examination should include a complete assessment of the injured extremity noting the dominant hand. Open wounds should be noted. Examination of all ﬁnger extensors and ﬂexors should be conducted and compared with the contralateral side. Threshold sensation should be thoroughly documented. The patient should be asked to make a ﬁst or the examiner should passively ﬂex the ﬁngers at the metacarpophalangeal (MP) and proximal interphalangeal (PIP) joints in order to identify any rotational malalignment. Range of motion (ROM) should be assessed at each joint. Standard lateral and posteroanterior or anteroposterior (AP) X-rays are required. If the fracture pattern is not clearly seen, semisupinated and semipronated views are helpful. The hand must be placed on the X-ray cassette in incomplete supination to obtain a true AP view of the ﬁfth ray and in a hypersupinated position for the second ray. For all views, the X-ray beam should be centered proximally/distally over the area of concern rather than capturing a generic view of the entire hand or digit. Specialized X-ray views (e.g., Brewerton for proximal phalanx base fractures) or computed tomography scans are sometimes needed to elucidate subtle fracture patterns, but such fractures are generally not candidates for percutaneous K-wire ﬁxation.

& SURGICAL TECHNIQUE Operating room setup should include the standard radiolucent hand table, with the operating table positioned to facilitate access for the C-arm. An experienced surgical assistant is helpful to hold the fracture reduction while the K-wires are inserted. The C-arm should be positioned to allow easy access for the surgeon to reduce the fracture. General anesthesia, Bier block, wrist block, digital block, or brachial plexus block can all be used. The choice depends on the desires of the patient, the speciﬁc injury, and preference of the surgeon and anesthesiologist. A tourniquet is generally applied to the upper arm or forearm but is usually not inﬂated. The fracture is manipulated and checked under ﬂuoroscopy for reduction. Fracture reduction can sometimes be achieved and held with the use of fracture reduction forceps or even towel clips applied over the intact skin. If the fracture cannot be reduced, open reduction is appropriate. K-wires are available in different diameters and lengths and can have one or both ends ground to a point. For metacarpals and proximal phalanges, a 0.045- or 0.035-inch K-wire is generally used for large or average-sized adults. A 0.035- or 0.028-inch K-wire can be used for smaller phalanges or children. The selection of K-wires is determined by bone size and surgeon preference. The high-rake angle trochar tips are preferred since they can be introduced at an oblique angle to the bone surface. K-wire tips that are cut in the operating room will not penetrate the bone easily; they cut a large diameter hole and

cannot be expected to sustain an appropriate interference ﬁt. Likewise, slow insertion speed and avoidance of repeat passes also improve the security of the K-wire ﬁt in the bone (11–13).

& Metacarpal Neck (Boxer’s Fracture) Reduction of the fracture is most commonly done with the Jahss maneuver (Fig. 1A) (14). The MP and interphalangeal (IP) joints are ﬂexed to 908, and the proximal phalanx can then be used to push the metacarpal head out of its volarly angulated position. One method of ﬁxation is to stabilize the fractured metacarpal head to the next closest intact metacarpal head. One or two K-wires are inserted transversely from the fractured metacarpal head into the next metacarpal head (Fig. 1B). Another K-wire is inserted between the diaphysis of these metacarpals for ﬁnal stabilization. An alternative method is to use a crossed pin technique with two K-wires inserted across the fracture from opposite sides of the metacarpal head in a retrograde fashion (Fig. 1C). Other methods are noted in Table 1. The hand is then placed in an ulnar gutter splint for 7 to 10 days. If satisfactory alignment is maintained, protected active ROM can then be initiated. Pin removal is at three to four weeks.

& Metacarpal Shaft Fractures The fracture is reduced by ﬂexing the MP joint to 908 to tighten the collateral ligaments and use the proximal phalanx to control the distal fragment. A towel clamp can be used to assist with rotational reduction. Fractures are then ﬁxed with crossed pins introduced laterally at the retrocondylar fossa of the metacarpal head and drilled obliquely to the opposite cortex. Alternatively, K-wires can be placed transversely from the fractured metacarpal into an adjacent intact metacarpal using the intact metacarpal as a plate of sorts. A combination of the methods can also be used (Fig. 2). The hand is then splinted in the safety position. K-wires are removed at three to four weeks.

& Fifth Metacarpal Base Fracture (Baby Bennett’s) Reduction is obtained by longitudinal traction and medially and volarly directed pressure on the base of the ﬁfth metacarpal. The ﬁfth metacarpal shaft is pinned to the fourth metacarpal shaft (Fig. 3). An obliquely oriented pin can be used to ﬁx the ﬁfth metacarpal base to the hamate (15). An ulnar gutter splint is used for 7 to 10 days. Pins are either cut and buried under the skin or left percutaneous and removed at three to four weeks.

& Second to Fourth Metacarpal Base Fractures The middle ray is the key to reduction and should be reduced ﬁrst. Following longitudinal traction, palmar translation is applied to reduce the joint. One pin is driven obliquely at 458 from the dorsoulnar surface of the metacarpal crossing the carpometacarpal joint without interfering with the extensor tendons (16,17). Alternatively, a longitudinal wire can be driven down the metacarpal through the MP into the distal carpal row (18).

& Bennett’s Fracture Reduction of the fracture is typically obtained by applying longitudinal traction, palmar abduction, and pronation of the thumb while exerting pressure over the dorsoradial aspect of the metacarpal base. Fixation requires one or two K-wires to maintain alignment of the shaft and joint surface (19). A nearly longitudinal K-wire can secure the metacarpal base to the trapezium (1). Another K-wire is then placed

Percutaneous Pinning of Phalangeal and Metacarpal Fractures & 39 (A) (B)

(C)

(D)

FIGURE 1 (A) Jahss maneuver for a ﬁfth metacarpal neck fracture. MP and IP joints ﬂexed to 908; the proximal phalanx can be used to push the metacarpal head back into position. (B) Fixation of the fractured metacarpal head into the adjacent metacarpal with an additional pin in the diaphysis for stabilization. (C) Crossed pin stabilization. (D) Pre and postoperative ﬁxation of a ﬁfth metacarpal neck fracture with a single pin. Abbreviations: IP, interphalangeal; MP, metacarpophalangeal.

transversely from the ﬁrst metacarpal base distal to the fracture into the second metacarpal base (Fig. 4A) (20). Alternatively, intermetacarpal pinning can be used alone (Fig. 4B) (21,22). A short-arm thumb spica is then applied. The K-wires are removed at four to six weeks.

Transverse fractures can be stabilized by a variety of pin placements. The fracture can be reduced with the MP and PIP joints in full ﬂexion and a K-wire inserted retrograde into the retrocondylar fossa of the proximal phalanx with a slight dorsal angulation. A single pin or crossed pins can be used. Alternatively, K-wires can be inserted from proximal to distal starting

& Phalangeal Fractures Several methods of percutaneous pinning can be used for phalangeal fractures (Fig. 5). An oblique or spiral fracture can be reduced by longitudinal traction applied manually or with ﬁnger traps. The fracture is held in place with a towel clamp or cannulated clamp. Rotation is veriﬁed by checking for abnormal crossing of the ﬁngers with ﬂexion of the MP and IP joints. Multiple mid-lateral pins, placed to avoid the lateral bands and perpendicular to the fracture, are used to hold the fracture (Fig. 5D). The reduction and pin placement are veriﬁed under ﬂuoroscopy and the ﬁnger is taken through an ROM. If extension is limited, the pins may have transﬁxed the extensor mechanism and should be repositioned.

TABLE 1 Alternative Methods of Fixation for Fifth Metacarpal Neck Fractures Fixation Intramedullary Bouquet osteosynthesis External ﬁxation

Method Retrograde through metacarpal head with MP ﬂexed Multiple intramedullary K-wires pre-bent and inserted from proximal metaphysis Span fracture with K-wires and attach pins with polymethylmethacrylate

Abbreviations: K-wires, Kirschner wires; MP, metacarpophalangeal.

40 & Yen and Meals (A)

(B)

(C)

FIGURE 2 (A) Percutaneous pinning of second and third metacarpal fractures to the adjacent metacarpal. (B) Preoperative fourth and ﬁfth metacarpal fractures. (C) Longitudinal single pin ﬁxation with a stabilizing cross pin for rotational control.

adjacent to the MP joint articular surface (Fig. 5B). This allows some motion at the MP joint, while permitting splinting in the safe position. For comminuted or unstable basilar fractures, a K-wire can also be inserted through the metacarpal head into the proximal phalanx (Fig. 5C). The K-wire is introduced lateral to the extensor tendon of the MP joint and advanced longitudinally across the fracture site. This violates a normal MP joint but does ensure that the MP joint remains in the favorable, fully ﬂexed position while the digit is immobilized. K-wires can be cut off just beneath the skin or left protruding and bent 908 to minimize inward migration. A sterile dressing is applied, and the ﬁnger and adjacent neighboring ﬁnger are splinted and placed in the safety position. Pins are removed at three weeks and then the ﬁnger is protected with buddy taping for another three weeks before allowing full ROM. A clinical example of an oblique distal third proximal phalanx fracture stabilized with parallel mid-lateral pins is seen in Figure 6.

& COMPLICATIONS Percutaneous pin ﬁxation can be technically demanding. The most common error when placing pins is to enter at an incorrect angle levering the fracture site open as the pin is advanced. Holding the fracture compressed and placing the pin at the correct angle prevent fracture distraction. If percutaneous

pinning does not hold the fracture reduced, conversion to an open technique is mandated. Superﬁcial pin track infection ranges from 0% to 10% (23–25). To a great extent, pin track infections can be avoided by sharply releasing tethered skin immediately after conﬁrmation of satisfactory pin placement. Oral antibiotics with or without pin removal is usually curative. Nonunion, malunion, or delayed union may be the result from malpositioned K-wires. Loss of motion of the MP or IP joints results in poor outcomes. ROM can be maximized by ensuring an adequate reduction, ensuring excursion of the tendons perioperatively, and early active ROM. Careful pin placement and prevention of plunging through the far cortex during surgery are necessary to avoid neurovascular compromise.

& OUTCOMES Outcome following ﬁxation of phalangeal and metacarpal fractures is variable but is generally favorable for percutaneous pinning with K-wires (10,26,27). Green and Anderson reported that 18 of 26 unstable phalangeal fractures regained full ROM within eight weeks after percutaneous ﬁxation (10). Belsky et al. reported that 61 of 100 phalangeal fractures regained full ROM (26). More recently, Hornbach and Cohen have reported on 12 unstable proximal phalanx fractures, with an average total

Percutaneous Pinning of Phalangeal and Metacarpal Fractures & 41 (A)

(B)

FIGURE 3 (A) Fracture ﬁxation of a “baby Bennett’s” fracture. Obliquely orientated pin to ﬁx the ﬁfth metacarpal base into the hamate and an additional pin stabilizing the fourth and ﬁfth metacarpal. (B) Pre and post-operative radiographs of a fourth metacarpal fracture with a dislocation of the ﬁfth metacarpal.

(A)

(B)

(C)

(D)

FIGURE 4 (A) Longitudinal K-wire securing metacarpal base to trapezium. An additional K-wire is used to secure the ﬁrst metacarpal to the second metacarpal base. (B) Intermetacarpal pinning of a Bennett’s fracture. (C) Preoperative radiographs of a Bennett’s fracture. (D) After closed reduction and pinning with a single pin. Fracture was stable under ﬂuoroscopy. Abbreviation: K-wire, Kirschner wire.

42 & Yen and Meals (A)

(C)

(B)

(D)

ROM of 2658. There was one ﬂexion contracture, one tendon adhesion, and one rotational deformity, but 10 of 12 patients obtained excellent results (24). Metacarpal fracture ﬁxation in 24 patients yielded an average of 08 to 38 of dorsal angulation having no metacarpal shortening with complete healing by six weeks (28). A nonrandomized comparison of transverse and intramedullary percutaneous pinning of the ﬁfth metacarpal neck showed excellent results with both methods and no difference in grip strength, ROM, pain, and angulation (29). Dartee et al. achieved full motion and complete pain relief in 32 of 33 patients with Bennett’s fractures treated with intermetacarpal pinning (21). In a comparison of open versus percutaneous pinning of the Bennett’s fracture by Lutz et al., the type of treatment did not inﬂuence the clinical outcome or the prevalence of radiological posttraumatic arthritis. But the percutaneous group had a higher incidence of adduction deformity of the ﬁrst metacarpal (30).

& SUMMARY Percutaneous pinning of metacarpal and phalangeal fractures is a useful technique for injuries that are unsuitable for closed reduction and cast immobilization and that do not demand open reduction. Soft tissue dissection and swelling is minimized with percutaneous pinning. One limitation is that motion exercises are often delayed due to immobilization and sometimes cannot be started until the K-wires are removed. However, for many patients, percutaneous pinning can minimize complications and provide excellent results. FIGURE 5 (A) Fixation of a transverse phalangeal fracture, ﬁrst, with reduction of the MP and IP joints in full ﬂexion. A K-wire is then inserted into the retrocondylar fossa with a slight dorsal angulation. (B) Crossed K-wire ﬁxation from proximal to distal starting adjacent to the MP articular surface. (C) Fixation through the metacarpal head into the proximal phalanx. (D) Oblique or spiral fracture is reduced and multiple midlateral pins placed perpendicular to the fracture avoiding the lateral bands and extensor mechanism. Abbreviations: IP, interphalangeal; K-wire, Kirschner wire; MP, metacarpophalangeal.

& SUMMATION POINTS

Indications &

Unstable fractures of the metacarpals and phalanges

Outcomes &

Good to excellent outcomes in O90% of cases

Complications &

Limited ROM, pin track infections, malunion, nonunion, and delayed union

FIGURE 6 Post-operative radiograph of oblique distal third phalangeal fracture ﬁxed with two K-wires. Abbreviation: K-wires, Kirschner wires.

Percutaneous Pinning of Phalangeal and Metacarpal Fractures & 43

& REFERENCES 1. Green DP, Rowland SA, Hotchkiss RN. Fractures and dislocations in the hand. Operative Hand Surgery. New York: Churchill Livingstone, 1991. 2. Kelsey JL, Pastides H, Kreiger N, et al. Upper Extremity Disorders: A Survey of Their Frequency and Cost in the United States. St. Louis: CV Mosby, 1980:1–71. 3. Emmett JE, Breck LW. A review and analysis of 11,000 fractures seen in a private practice of orthopedic surgery, 1937–1956. J Bone Joint Surg Am 1958; 40-A(5):1169–75. 4. Hove LM. Fractures of the hand. Distribution and relative incidence. Scand J Plast Reconstr Surg Hand Surg 1993; 27(4):317–9. 5. Lambotte A. Contribution a la chirurgie conservatrice de la main doms les traumatismes. Arch Franco Belges Chir 1928; 31:759–61. 6. Meals RA, Meuli HC. Carpenter’s nails, phonograph needles, piano wires, and safety pins: the history of operative ﬁxation of metacarpal and phalangeal fractures. J Hand Surg [Am] 1985; 10(1):144–50. 7. Tennant CE. Use of a steel phonograph needle as a retaining pin in certain irreducible fractures of the small bones. JAMA 1924; 83:193. 8. Bosworth DM. Internal splinting of fractures of the ﬁfth metacarpal. J Bone Joint Surg Am 1937; 19:826–7. 9. Vom Saal FH. Intramedullary ﬁxation in fractures of the hand and ﬁngers. J Bone Joint Surg Am 1953; 35:5–16. 10. Green DP, Anderson JR. Closed reduction and percutaneous pin ﬁxation of fractured phalanges. J Bone Joint Surg Am 1973; 55(8):1651–4. 11. Graebe A, Tsenter M, Kabo JM, et al. Biomechanical effects of a new point conﬁguration and a modiﬁed cross-sectional conﬁguration in Kirschner-wire ﬁxation. Clin Orthop Relat Res 1992; 283:292–5. 12. Namba RS, Kabo JM, Meals RA. Biomechanical effects of point conﬁguration in Kirschner-wire ﬁxation. Clin Orthop Relat Res 1987; 214:19–22. 13. Zohman GL, Tsenter M, Kabo JM, et al. Biomechanical comparisons of unidirectional and bidirectional Kirschner-wire insertion. Clin Orthop Relat Res 1992; 284:299–302. 14. Jahss SA. Fractures of the metacarpals: a new method of reduction and immobilization. J Bone Joint Surg Am 1938; 20:178–86. 15. Kjaer-Petersen K, Jurik AG, Petersen LK. Intra-articular fractures at the base of the ﬁfth metacarpal. A clinical and radiographical study of 64 cases. J Hand Surg [Br] 1992; 17(2):144–7.

16. de Beer JD, Maloon S, Anderson P, et al. Multiple carpo-metacarpal dislocations. J Hand Surg [Br] 1989; 14(1):105–8. 17. Gurland M. Carpometacarpal joint injuries of the ﬁngers. Hand Clin 1992; 8(4):733–44. 18. Foster RJ. Stabilization of ulnar carpometacarpal dislocations or fracture dislocations. Clin Orthop Relat Res 1996; 327:94–7. 19. Howard FM. Fractures of the basal joint of the thumb. Clin Orthop Relat Res 1987; 220:46–51. 20. Breen TF, Gelberman RH, Jupiter JB. Intra-articular fractures of the basilar joint of the thumb. Hand Clin 1988; 4(3):491–501. 21. Dartee DA, Brink PR, van Houtte HP. Iselin’s operative technique for thumb proximal metacarpal fractures. Injury 1992; 23(6):370–2. 22. van Niekerk JL, Ouwens R. Fractures of the base of the ﬁrst metacarpal bone: results of surgical treatment. Injury 1989; 20(6):359–62. 23. Berkman EF. Internal ﬁxation of metacarpal fractures exclusive of the thumb. J Bone Joint Surg Am 1943; 25:816–20. 24. Hornbach EE, Cohen MS. Closed reduction and percutaneous pinning of fractures of the proximal phalanx. J Hand Surg [Br] 2001; 26(1):45–9. 25. James JI. The assessment and management of the injured hand. Hand 1970; 2(2):97–105. 26. Belsky MR, Eaton RG, Lane LB. Closed reduction and internal ﬁxation of proximal phalangeal fractures. J Hand Surg [Am] 1984; 9(5):725–9. 27. Joshi BB. Percutaneous internal ﬁxation of fractures of the proximal phalanges. Hand 1976; 8(1):86–92. 28. Galanakis I, Aligizakis A, Katonis P, et al. Treatment of closed unstable metacarpal fractures using percutaneous transverse ﬁxation with Kirschner wires. J Trauma 2003; 55(3):509–13. 29. Wong TC, Ip FK, Yeung SH. Comparison between percutaneous transverse ﬁxation and intramedullary K-wires in treating closed fractures of the metacarpal neck of the little ﬁnger. J Hand Surg [Br] 2006; 31(1):61–5. 30. Lutz M, Sailer R, Zimmermann R, et al. Closed reduction transarticular Kirschner wire ﬁxation versus open reduction internal ﬁxation in the treatment of Bennett’s fracture dislocation. J Hand Surg [Br] 2003; 28(2):142–7.

7 Percutaneous Mini Screw Fixation of Phalangeal and Metacarpal Fractures Alan E. Freeland and William B. Geissler

Department of Orthopedic Surgery and Rehabilitation, University of Mississippi Medical Center, Jackson, Mississippi, U.S.A.

& INTRODUCTION The principles of unstable hand fracture management include anatomic restoration, sufﬁcient stability to prevent displacement until callus seals the fracture and allows early progressive functional recovery, and the avoidance of unnecessary additional operative trauma (1). A fracture is considered unstable when reduction cannot be achieved and maintained without ﬁxation or when motion cannot be initiated without the loss of reduction. Large (involving O25% of the articular surface) articular and oblique diaphyseal hand fractures are typically inherently unstable. Hand surgeons have long recognized the consequences of ﬁbroplasia, scar generation, and digital stiffness that may result from the open surgical treatment of closed hand fractures, especially those of the proximal phalanges and proximal interphalangeal joints (PIPJs) of the ﬁngers (2–7). Subperiosteal dissection may also devascularize fracture fragments. Consequently, hand surgeons have been among the early advocates of minimally invasive surgery (MIS) and have admonished against injudicious open surgical procedures. “Atraumatic” or MIS with closed reduction and internal ﬁxation (CRIF) allows “biological (minimally undisturbed) fracture healing” (8). CRIF with percutaneous wires or mini screws is relatively atraumatic when compared with open operative procedures. CRIF preserves periosteal integrity and circulation at the fracture site and minimizes expansion of the zone of injury. Intraoperative ﬂuoroscopic X-ray capability facilitates CRIF. Wires splint without compressing fractures. By purchasing the bone cortices and having the option for compression, mini screw ﬁxation provides greater fracture stability than do Kirschner (K)-wires, with little more soft tissue damage (1,9,10). Percutaneous mini screw ﬁxation may require a higher level of technical proﬁciency than that in K-wire ﬁxation. While K-wires must typically be removed four to six weeks after insertion, mini screws have the additional advantage of remaining in place for the duration of fracture healing. Mini screws are usually removed only if they become symptomatic, a rare occurrence. The pace and intensity of rehabilitation may be accelerated and morbidity decreased owing to the increased stability of mini screw ﬁxation.

& INDICATIONS CRIF using percutaneous K-wires has established benchmark clinical outcomes for the management of unstable simple (two-part) long oblique extraarticular phalangeal fractures, articular fractures of the phalanges, and Bennett’s fractures of the thumb (1–6,11–13). The length of a long oblique fracture is

equal to or greater than twice the diameter of the adjacent bone. The length of a short oblique fracture is less than twice the length of the adjacent bone diameter (1). Open K-wire or mini screw ﬁxation is typically reserved for irreducible closed isolated simple fractures or as a contingency for failure of percutaneous technique. Open treatment may also be appropriate for open, pathologic, or multiple hand fractures; hand fractures accompanied by ipsilateral extremity injuries; and polytraumatized or unreliable patients (1–4,14). Percutaneous mini screw ﬁxation alone is usually not suitable for comminuted fractures. Although there may be exceptions, fractures of the metacarpals are usually not sufﬁciently accessible for percutaneous mini screw ﬁxation.

& PREOPERATIVE PLANNING Hand fractures are evaluated for local signs, deformity, stability, wounding, complexity, sensation, and tissue viability. Digital block with local anesthesia may relieve pain sufﬁciently to allow the digital motion necessary to deﬁne a deformity. The patient should be assessed for any anesthetic or surgical risk factors. Good quality routine posteroanterior (PA), lateral, and at least one oblique X-ray views are sufﬁcient to evaluate most hand fractures. Additional oblique or special views may be taken at the physician’s discretion. Gedda has described a special view to proﬁle the thumb trapeziometacarpal joint for Bennett’s fractures (12,13). Computerized tomograms or magnetic resonance imaging is rarely necessary.

& SURGICAL TECHNIQUE An extremity tourniquet, hand table, mini or conventional C-arm ﬂuoroscopic X-ray machine, a conventional X-ray machine, a cannulated power drill, K-wire set, and the appropriate mini screw set and instruments must be available. A “time out” should be taken to avoid “wrong site surgery.” The procedure may be performed with general anesthesia or an appropriate regional or digital block. The use of a tourniquet insures good visibility at the operative site throughout the procedure and minimizes operative time, which may be signiﬁcant should difﬁculties arise that require conversion to an open procedure.

& Mini Screws Conventional mini screws may be conceptualized as small straight K-wires with a head and threads (1). The proximal cortex of the pilot hole may be enlarged to the thread diameter of the intended mini screw to produce a “gliding hole.”

46 & Freeland and Geissler

The screw head buttresses the adjacent cortex while the distal threads purchase the distal cortex, compressing the fracture as the screw is tightened. Lag screws have the greatest compressive force when inserted perpendicularly to a fracture. Mini screws inserted perpendicularly to the bone axis provide maximum resistance to shear forces and provide sufﬁcient stability for hand fractures (1). Closed anatomic fracture reduction and provisional K-wire ﬁxation are critical to successful percutaneous mini screw management, especially in articular fractures. Once fracture reduction is assured, the K-wires can be exchanged for mini screws, thus enhancing stability. The exchange is facilitated owing to collinear K-wire and mini screw core diameters allowing K-wire removal and immediate insertion of a selftapping bicortical mini screw (“ﬁxation mini screw”) or mini lag screw (Table 1). Roth and Auerbach have reported that bicortical ﬁxation is as reliable as lag screw ﬁxation in treating wellreduced oblique phalangeal shaft fractures (9). Although single mini screw ﬁxation is typically sufﬁcient for securing articular fragments owing to interlocking of the cancellous interstices, two or more mini screws are required for reliable ﬁxation of oblique shaft fractures of the hand. Two or more mini screws in the shaft of a hand fracture serve to protect each other from shear, rotational, and bending forces during rehabilitation. Larger articular fragments may allow the insertion of two mini screws spaced with equal distance between the screws and between each mini screw and the proximal or distal edge of the fracture. Cannulated headless mini screws are also available. Their conical shape and differential thread pitch (the screw pitch increases as the cone expands) allow them to compress the fracture. Percutaneous headless cannulated mini screw ﬁxation is an excellent option for oblique articular and diaphyseal fracture ﬁxation in the hand (10). Headless mini screws typically ﬁt entirely within the bone fragments, minimizing interference with adjacent soft tissues. Mini screw cannulation allows precise placement over a guide wire and may simplify insertion.

& Bennett’s Fracture

Technique

The articular fragment at the base of the thumb metacarpal is secured in anatomic position by the anterior ulnar oblique ligament while the remaining metacarpal base is subluxed radially, proximally, and dorsally (Fig. 1A,B). A closed reduction is performed under ﬂuoroscopic X-ray control using traction and manipulation. A pointed dental pic may be useful in applying pressure at the base of the thumb metacarpal. A 1 to 2 cm dorsal “buttonhole” or “portal-sized” incision is centered between the abductor pollicis longus and the extensor pollicis longus approximately 1 cm from the proximal border of the

TABLE 1 Inches to Millimeter Conversion Tables K-wire diameter (inches) 0.028 0.035 0.045 0.62

Core diameter (mm)

Corresponding mini screw core diameter

0.7 1.1 1.5 2.0

1.1 1.5 2.0 2.7

K-wires are named by their diameter. Mini screws are designated by their thread diameter. Abbreviations: K-wire, Kirschner wire.

(A)

(B)

(C)

(D)

(E)

(F)

FIGURE 1 (A) PA illustration of a Bennett’s fracture. (B) Lateral illustration of a Bennett’s fracture. (C) The concept of centering a “target” on the articular fragment is illustrated. A screw head is located in the center of the target. A cross-section of a Kirschner wire is located on an inner peripheral ring to the left of center. (D) Fracture stabilization with a central mini screw and a peripheral K-wire. (E) PA illustration after the K-wire is cut and bent at its proximal end. (F) Lateral illustration after the K-wire is cut and bent at its proximal end. Abbreviations: K-wire, Kirschner wire; PA, posteroanterior.

thumb metacarpal. A ﬁne hemostat is used to spread the subcutaneous tissue away from the bone. A drill guide, tap sleeve, or 14-gauge hypodermic needle is always used with K-wires or drill bits to protect the adjacent soft tissues. The concept of “targeting” is used to determine wire placement (Fig. 1C). The fracture is secured with one K-wire directed through the dorsal base of the main metacarpal fragment into the center of the palmar ulnar fragment (“target”). A second peripheral K-wire maintains the reduction and prevents rotation of the fragment during mini screw insertion. The central K-wire is removed. Screw length may be determined using a depth gauge. A self-tapping mini screw is inserted (Fig. 1D). The peripheral K-wire may removed or left undisturbed for two to four weeks at the discretion of the surgeon, depending upon the stability of the fracture (Fig. 1E,F).

Percutaneous Mini Screw Fixation of Phalangeal and Metacarpal Fractures & 47 (A)

(B)

(C)

(D)

(E)

FIGURE 2 (A) Displaced Bennett’s fracture. (B) Bennett’s fracture, reduced and stabilized with a single central K-wire. (C) A peripheral K-wire has been added. A mini screw has been inserted in place of the central Kwire. (D) The small, minimally invasive incision is demonstrated one week after surgery. (E) The K-wire has been removed. The central mini screw remains in position. Abbreviation: K-wire, Kirschner wire.

Case Example

A 31-year-old patient fell while playing tennis and sustained a Bennett’s fracture of his dominant hand (Fig. 2A). Surgery was performed on the day of injury. The fracture was reduced and provisionally ﬁxed with a 1.5 mm central K-wire (Fig. 2B). After inserting a peripheral 1.5 mm K-wire, the central wire was removed and a self-tapping bicortical 2.0 mm mini screw was inserted (Fig. 2C). The K-wire was removed two weeks after surgery (Fig. 2D,E). The patient resumed administrative duties within one week. The fracture healed and the patient resumed full occupational responsibilities six weeks after surgery. Five years after injury, the patient was asymptomatic and had full function.

vents rotation of the fragment during the remainder of the procedure. The proximal origin of the collateral ligament may be reﬂected distally or a cruciate incision made at the mid-origin of the conjoint collateral and accessory collateral ligaments adjacent to the center of the fragment (Fig. 4E,F). A K-wire or drill bit is directed through the center of the condylar fragment and into the opposing condylar cortex. The central K-wire is exchanged for a mini screw (Fig. 3E). The peripheral K-wire may be removed or left undisturbed for two to four weeks at the discretion of the surgeon, depending upon the stability of the fracture. (A)

(B)

(C)

(D)

(E)

& Condylar Fracture of the Proximal Phalanx

Technique

Condylar fractures typically displace proximally (Figs. 3 and 4). A “bicondylar sign” may be present on lateral X ray owing to rotation of the condylar fragment. A closed reduction is performed under ﬂuoroscopic X-ray control using traction and a ﬁne-pointed reduction forceps (Fig. 3B,C and Fig. 4B) (17). The condyles should align concentrically on lateral X ray following reduction. A 1 to 2 cm “buttonhole” or “portal-sized” midlateral incision is centered over the condylar fragment (“target”). (Fig. 4C,D) A ﬁne hemostat is used to spread the subcutaneous tissue away from the collateral ligament overlying the condylar fragment. A drill guide or tap sleeve is always used with K-wires or drill bits to protect the adjacent soft tissues. A K-wire is inserted into the distal periphery of the subchondral bone of the condylar fragment just beneath and parallel to the articular surface of the proximal phalanx at the PIPJ and advanced through the opposing cortex (Fig. 3D). The peripheral K-wire maintains the reduction and pre-

FIGURE 3 (A) Displaced unicondylar fracture, PA view. (B) Digital traction restores ﬁnger length. (C) The fracture reduction is completed by direct application of a pointed reduction forceps. (D) A K-wire is inserted parallel to and just beneath the articular surface. (E) A mini screw is inserted through the central portion of the condylar fragment. Abbreviations: K-wire, Kirschner wire; PA, posteroanterior. Source: From Ref. 15; (Fig. 1).

48 & Freeland and Geissler (A)

(A)

(B)

(B)

(C)

(C)

(D)

1–2 cm (D)

(E)

(E)

(F)

(F)

FIGURE 4 (A) Displaced unicondylar fracture, lateral view. (B) The fracture reduction is completed by direct application of a pointed reduction forceps. (C) The concept of centering a “target” on the articular fragment is illustrated. A screw head is located in the center of the target. A cross-section of a Kirschner wire is located on an inner peripheral ring to the right of center. (D) The midlateral line is illustrated for placement of the mini incision. (E) A cruciate incision is illustrated at the center of rotation of the PIPJ. (F) Partial reﬂection of the origin of the collateral ligament is illustrated. Abbreviations: PIPJ, proximal interphalangeal joint. Source: From Ref. 15; (Fig. 1).

Case Example

A 19-year-old patient jammed the index ﬁnger of his dominant hand while playing basketball. He sustained a displaced fracture of the ulnar condyle of the proximal phalanx (Fig. 5A). A closed reduction was performed and temporarily secured with a cannulated pointed reduction forceps (Fig. 5B). A peripheral 1.5 mm K-wire and a central 1.5 mm mini screw were inserted (Fig. 5C). The wire was removed two weeks after surgery. The mini screw was left in place (Fig. 5D). The fracture healed and the patient had 178 to 858 of PIPJ ﬂexion six weeks after surgery (Fig. 5E,F).

& Long Oblique Fractures of the Phalangeal Shaft

Technique

Oblique proximal phalangeal shaft fractures tend to shorten and rotate (Fig. 6A). A closed reduction is performed under ﬂuoroscopic X-ray control using traction and one or two ﬁne-pointed reduction forceps (Fig. 6B,C). Approximately 1 to

FIGURE 5 (A) Displaced unicondylar fracture, PA view. (B) The fracture reduction is completed by direct application of a cannulated pointed reduction forceps. (C) A K-wire has been inserted parallel to and just beneath the articular surface. A mini screw has been inserted through the central portion of the condylar fragment. (D) The K-wire has been removed. The fracture remains stabilized by the central mini screw. (E) Finger extension at six weeks. (F) Finger ﬂexion at six weeks. Abbreviations: K-wire, Kirschner wire; PA, posteroanterior. Source: From Ref. 16; (Fig. 2).

2 cm midlateral incisions are centered over the junctures of the proximal third and middle third and the middle and distal third of a sagittal uniplanar fracture. Uniplanar oblique fractures may vary slightly from the true sagittal plane, but are rarely found in the coronal plane. Wire and mini screw application are easier in uniplanar oblique than in spiral fractures which require adjustments in the position selected for mini screw insertion in relation to the rotating plane of the fracture for each wire or screw that is inserted. A ﬁne hemostat is used to spread the subcutaneous tissue away from the lateral band or oblique ﬁbers of the metacarpophalangeal joint dorsal expansion proximally or the lateral surface of the proximal phalanx distally. The lateral band may be retracted, divided, or excised to approach the proximal mini screw insertion site (19–21). Cortical bone surfaces of metacarpals and phalanges are hard and round, and the medullary canal is narrow. A drill guide, tap sleeve, or 14-gauge hypodermic needle is always used with K-wires or drill bits to control the wire or drill, prevent slippage, and protect the soft tissues at the insertion site. Instrument compression of the

Percutaneous Mini Screw Fixation of Phalangeal and Metacarpal Fractures & 49 (A)

(B)

(C)

(D)

(E)

fracture into quarters, when the fracture length is three times the bone diameter (1). Headless mini screws are inserted so that the widest parts of the screws are frequently positioned opposite each other to allow maximum bone purchase. Headless screws are usually not placed in the middle third of the phalangeal shaft owing to the risk of fragmenting the hard cortical surfaces in the narrow area of the isthmus of the phalanx. Supplementary K-wire ﬁxation may be used in the midshaft area, if necessary.

Case Example

(F)

(G)

(H)

(I)

(J)

A 38-year-old patient fell and sustained a closed oblique fracture of the shaft of the proximal phalanx of her nondominant small ﬁnger (Fig. 7A,B). Small “stab” skin incisions were made to facilitate K-wire and mini screw insertion (Fig. 7C). Two 1.1 mm K-wires were inserted, dividing the fracture into thirds. Indirect screw measurement was performed (Fig. 7D). Two 1.5 mm mini screws were inserted (Fig. 7E,F). The fracture healed. Six weeks after surgery, the patient had recovered ﬂexion of 128 to 808 of PIPJ and returned to work (Fig. 7G,H).

& Articular Fracture—Phalangeal Base

Technique and Case Example

FIGURE 6 (A) A closed long oblique fracture of a proximal phalanx is shortened and rotated. (B) Length is restored and alignment improved with traction and manipulation. (C) Reduction is completed by the direct application of a pointed reduction forceps. (D) The reduced fracture is secured with two K-wires that divide the fracture into thirds. (E) The distal K-wire is removed. (F) Mini screw length is measured indirectly. (G) A bicortical “ﬁxation” mini screw is inserted distally. (H) The proximal K-wire is removed. (I) The proximal cortex is drilled to correspond to the mini screw thread diameter. (J) A mini lag screw is inserted proximally. Abbreviations: K-wire, Kirschner wire. Source: From Ref. 18; (Fig. 3).

fracture with a ﬁne-pointed small bone reduction forceps prevents distraction at the fracture site during wire insertion and the mini screw for K-wire exchange. Long oblique diaphyseal phalangeal fractures may be stabilized by two or more mini screws spaced with equal distance between the screws and between each mini screw and the proximal or distal edge of the fracture. The fracture is secured with two K-wires directed through both cortices of the reduced fracture at the selected sites that divide the fracture into thirds (Fig. 6D). One K-wire is removed (Fig. 6E). Screw length may be measured directly by depth gauge or indirectly determined by holding the mini screw over the fracture and imaging with the ﬂuoroscope (Fig. 6F). Indirect measurement by imaging avoids the small but real risk of displacing the fracture that accompanies the depth gauge measurement maneuver. A self-tapping bicortical “ﬁxation” mini screw is inserted distally (Fig. 6G). The proximal K-wire is removed (Fig. 6H). The proximal cortex is enlarged to correspond to the thread diameter of the selected mini screw (Fig. 6I). A self-tapping mini lag screw is inserted (Fig. 6J). A third mini screw may be inserted at the discretion of the surgeon. Three mini screws may be inserted, dividing the

A 34-year-old patient jammed his ﬁnger at work. He sustained a closed articular fracture of the base of the middle phalanx (Fig. 8A). A closed reduction was performed under ﬂuoroscopic X-ray control using traction and a ﬁne-pointed cannulated reduction forceps (Fig. 8B). One guide wire was placed centrally into the condylar fragment parallel to the articular surface and just distal to the insertion of the collateral ligament (Fig. 8B,C). This site should be selected so as to assure that the mini screw threads do not penetrate the adjacent joint surface. The guide wire is advanced through the reduced fracture fragments and through the skin on the opposite side of the digit so that it can be removed easily should it break. A second guide wire is inserted eccentrically into the condylar and major phalangeal fragments to prevent fragment rotation during reaming and mini screw insertion (Fig. 8D,E). A 1 to 2 cm midlateral incision is centered over the condylar fragment (“target”) (Fig. 8F). Blunt dissection is continued with a hemostat to the level of the bone surface. A cannulated reamer slides over the central guide wire (Fig. 8G). The bone is then reamed across both bone cortices. Recently, a self-drilling headless cannulated mini screw (variable pitch mini Acutrak screw, Acumed, Hillsboro, Oregon, U.S.A.) has been introduced. With this new self-drilling cannulated headless mini screw, only the near cortex has to be reamed, and the self-drilling screw is then inserted over the guide wire (Fig. 8H). The screw is inserted over the guide wire so that it ﬁts entirely inside the bone on both the PA and lateral X-ray views. The ﬁnal mini screw position is ﬂuoroscopically conﬁrmed by both PA and lateral views. The guide wires are then removed (Fig. 8I,J). A single mini screw may provide adequate stability. The fracture healed and the patient had recovered full ﬁnger motion six weeks after surgery (Fig. 8K,L). A second headless cannulated screw may be inserted into larger condylar fragments at the discretion of the surgeon. The second mini screw is usually inserted in the opposite direction of the ﬁrst screw, owing to the obliquity of the fracture line. This allows the smaller diameter lead portion of the screw to cross the fracture site and engage the smaller remaining cortical area of the condylar fragment, thus decreasing the risk of fragmentation.

50 & Freeland and Geissler (A)

(D)

(B)

(C)

(E)

(F)

(G)

(H)

FIGURE 7 (A) A closed long oblique fracture of a proximal phalanx is shortened and rotated. The amount of rotation corresponds to the size of the gap between the fragments. (B) A lateral x-ray demonstrates that the tip of the proximal fragment will block PIPJ ﬂexion unless it is reduced. (C) The incision site is guided by ﬂuoroscopic xray. (D) Two K-wires stabilize the fracture. Mini screw length is measured indirectly. (E) Mini screw ﬁxation, PA view. (F) Mini screw ﬁxation, lateral view. (G) Finger extension six weeks after surgery. (H) Finger ﬂexion six weeks after surgery. Abbreviations: PIPJ, proximal interphalangeal joint; K-wire, Kirschner wire; PA, posteroanterior.

& Postoperative Care and Rehabilitation Functional recovery is the fundamental goal of rehabilitation (22,23). Early digital motion and differential superﬁcialis and profundus tendon gliding exercises are prioritized. Elevation augments digital motion by diminishing and resolving restrictive swelling and edema. Progress is guided by soft tissue response, fracture stability, and the patient’s pain tolerance. Rehabilitation must be stopped short of generating additional inﬂammatory or ﬁbroblastic response, signaled by increased pain, swelling, tenderness, redness, or heat at the fracture site. Fracture stability limits pain and allows more rapid implementation of exercises. There may be less morbidity if exercises can be started early (within 21 days), although ﬁnal outcome is usually not adversely affected in patients who require as much

as four weeks of continuous static splinting provided motion is initiated at that time (24,25). Protective splints may be worn between exercise sessions until pain, swelling, and tenderness subside. Splints that hold the wrist in slight ﬂexion and all four ﬁnger metacarpophalangeal joints in full ﬂexion allow the extrinsic extensors to supplement the intrinsic extensors in recovering interphalangeal joint (IPJ) extension without impeding the recovery of ﬁnger ﬂexion, especially in patients with proximal phalangeal fractures. An attachment to hold the PIPJ’s fully extended may be added to the splint at night to decrease the risks of PIPJ extensor lag and contracture. The recovery of 4 to 5 mm of ﬂexor tendon excursion during the ﬁrst four weeks following ﬂexor tendon repair in

Percutaneous Mini Screw Fixation of Phalangeal and Metacarpal Fractures & 51 (A)

(B)

(C)

(D)

(E)

(F)

(G)

(H)

(I)

(J)

(K)

(L)

FIGURE 8 (A) Displaced large articular fracture of the condylar base of a middle phalanx. (B) A K-wire has been inserted through a cannulated pointed reduction forceps. (C) The K-wire is parallel and distal to the proximal joint surface. (D) A second K-wire is being inserted through the fracture distal to the ﬁrst K-wire. (E) The reduction and K-wire ﬁxation have been completed. (F) A small incision is made in the skin at the insertion site of the proximal K-wire. (G) The cannulated drill has been inserted over the proximal K-wire. (H) The cannulated headless mini screw is ready to be inserted over the proximal K-wire. (I) The reduced fracture has been secured with the headless mini screw. The headless mini screw is entirely contained within the bone. (J) The reduced fracture has been secured with the headless mini screw, lateral view. The patient has regained full ﬁnger extension (K) and full ﬁnger ﬂexion (L) six weeks after surgery. Abbreviations: K-wire, Kirschner wire.

zone 2 reliably prevents the formation of permanent adhesions between bone and tendon, and correlates with good to excellent ﬁnal digital motion in most patients (26). A more modest recovery during the four weeks following surgery predicts less favorable results. Extrapolation of these ﬁndings to proximal phalangeal fractures and allowance for 4 to 5 mm of both adjacent ﬂexor and extensor tendon excursion would require a 408 to 508 partial arc of PIPJ or total active integrated ﬁnger motion (27). Metacarpal and phalangeal fractures are usually clinically stable at four weeks after injury even in the absence of the appearance of callus on X ray (1). Fracture fragments may be considered “locked” when they are joined by callus that is visualized on X ray, usually at ﬁve to six weeks after ﬁxation. At four to six weeks after injury, patients may be weaned from their splints as fracture stability and healing, pain, and tenderness allow. When adequate fracture healing is assured, movement may be intensiﬁed, and static joint blocking and strengthening and conditioning exercises may be initiated with

minimal risk of fracture disruption. Passive stretching and dynamic splints designed to overcome tendon and joint adhesions may usually be initiated safely at ﬁve to six weeks after injury (22,23). Patients are instructed and checked out so that they can perform daily therapy at home. If monitoring demonstrates that progress is unsatisfactory, outpatient therapy is initiated. Work hardening may be added if needed. Therapy is continued until the patient reaches a point of maximum recovery. Patients may continue to regain PIPJ motion for as long as one year following injury (7).

& COMPLICATIONS AND THEIR MANAGEMENT & Intraoperative Complications Percutaneous ﬁxation sacriﬁces direct visual conﬁrmation of fracture reduction. The fracture may be opened if direct visualization becomes necessary during the procedure in order to

52 & Freeland and Geissler

assure proper fracture reduction. Unambiguously, irreducible fractures require open reduction. Percutaneous or open K-wire or open mini screw ﬁxation may be used as a contingency when technical difﬁculties necessitate abandonment of percutaneous mini screw ﬁxation. Physicians and patients should be prepared for conversion of a percutaneous to an open procedure. Mini screw breakage, loosening, or pull-out is a rare occurrence.

& Long-Term Complications Residual stiffness is the most common complication following articular and phalangeal fractures of the hand (2–4,7). Patients with residual ﬁnger stiffness typically adapt well and rarely desire remedial surgery (7,28,29). Approximately 25% of patients with articular fractures suffer long-term cold intolerance and aching pain, typically managed nonoperatively (7,28–30). Symptomatic arthritis is more frequent in poorly reduced articular fractures, emphasizing the importance of accurate reduction and reliable stabilization. Occasional joint reconstruction may be necessary. Malunion and nonunion are rare occurrences. Fambrough and Green reported a ﬂexor tendon rupture owing to attrition from a protruding mini screw tip (31).

& OUTCOMES Initial efforts at mini screw ﬁxation of hand fractures in 1958 were discouraging (32). However, in 1976, Crawford reported typically successful results and no complications following mini screw ﬁxation in 21 various articular fractures with large fragments and oblique phalangeal shaft fractures, reviving interest in the technique (33).

& Bennett’s Fracture CRIF with percutaneous K-wires has previously been acknowledged as the treatment of choice for Bennett’s fracture (3,4,11–13). K-wire or screw ﬁxation has been successfully used for those Bennett’s fractures requiring open reduction (34–37). Lutz et al. reported no difference in outcome or posttraumatic arthritis between patients treated with percutaneous Kirschner wire ﬁxation or open mini screw ﬁxation followed for a mean of seven years (37). Meyer et al. reported uniform fracture healing, 13 good to excellent results, one fair result, and two poor results in 16 Bennett’s fractures treated with cannulated screw osteosynthesis and followed for an average of 17 weeks (38).

& Unicondylar Fractures Weiss and Hastings reported their results in 38 consecutive patients with unicondylar fractures of the proximal phalanx followed for an average of 3 years (39). PIPJ motion in their series averaged from 138 (range: 0–358) to 858 (range: 60–1158) of ﬂexion. Clinical outcomes measured by total active PIP joint motion were slightly better when two or more K-wires were used (898G188) than with open mini screw ﬁxation (798G88) (30,40). No differences were detected between percutaneous and open wiring techniques. None of the fractures stabilized with multiple K-wires or mini screws lost reduction for the duration of treatment. Five out of seven undisplaced fractures and four out of ten fractures treated with a single K-wire lost reduction during the course of treatment, required secondary ﬁxation, and had greater PIP joint stiffness than those managed with multiple K-wire or mini screw ﬁxation. These investigators did not use percutaneous mini screws. Irreducible condylar fractures were approached in the capsular interval between the central slip and the ipsilateral lateral band. Full recovery of PIP joint motion was

the exception rather than the rule, typically owing to some residual extensor lag or ﬂexion contracture or some loss of ﬂexion. They concluded that all unicondylar phalangeal fractures require initial ﬁxation with two or more K-wires, one or more mini screws, or a wire and a mini screw. Ford, et al. detailed their results treating ten condylar fractures of the proximal phalanges and four of the middle phalanges with open mini screw ﬁxation (30). No excellent results were reported. Four patients with unicondylar proximal phalangeal fractures had good results and six had poor outcomes. There was an average residual loss of 208 to 308 of extension. PIPJ ﬂexion was more reliably restored. Dynamic splints seldom improved results. Two patients with condylar fractures of the middle phalanx had good results and two had poor results. Geissler and Freeland reported on 12 patients with intra-articular fractures of the digits (10). Ten patients had unicondylar fractures of the ﬁngers and two patients had intraarticular thumb fractures. The average age was 22 years (range: 16–35 years). Nine patients were males and three were females. Nine patients underwent stabilization with a single headless cannulated mini screw and three patients had two headless mini screws inserted. All patients healed clinically and radiographically within six weeks following surgery. There was no loss of reduction in any of the patients. Out of the 10 patients with unicondylar fractures of the phalanges, the average loss of PIPJ extension was 38 (range: 0–78) and the average PIPJ ﬂexion was 858 (range: 80–958). Two patients with intra-articular thumb fractures averaged 168 of IPJ hyperextension (range: 12–208) and 608 of IPJ ﬂexion (range: 55–658). There was no fracture displacement or malunion. No patients required mini screw removal. Although this series is small, the results were uniform and suggest that headless mini screw ﬁxation may be superior to open mini screw ﬁxation and at least equivalent to multiple wire ﬁxations. More data and replication of these results are needed.

& Long Oblique Proximal Phalangeal Shaft Fractures Green and Anderson reported that 18 out of 21 (87%) oblique proximal phalangeal shaft fractures treated with two or more transﬁxing K-wires healed and achieved a full range of motion at eight weeks after injury (6). Belsky et al. reported fracture healing and 29 good [total active motion (TAM) 180–2208] and 61 excellent (TAM O2208) motion in 90 out of 100 consecutive closed simple phalangeal shaft fractures treated with percutaneous K-wire CRIF (5). Out of the total, 55 fractures were oblique. Using open K-wire ﬁxation on a variety of closed phalangeal fracture conﬁgurations, Widgerow, et al. reported results nearly equivalent to those of Green and Anderson and Belski, et al. (5,6,40) Dabezies and Schutte reported excellent results (TAM O2208) in all 29 proximal phalangeal fractures stabilized with mini screws alone, or with mini plates placed on the dorsolateral side of the phalanx (19). They advocated a midlateral approach dividing the lateral band, if necessary, and avoiding the gliding tissue between the periosteum and the extensor apparatus. Ford, et al. reported 13 excellent results, four good results, and one poor result in 18 proximal phalangeal fractures treated by open reduction and internal ﬁxation using 1.5 and 2 mm AO mini screws (30). Diwaker and Stothard reported better results with open mini screw ﬁxation than with percutaneous K-wires in their retrospective review of metacarpal and phalangeal fractures (41). Horton et al. conducted a randomized prospective study of 22 patients with oblique extraarticular proximal phalangeal

Percutaneous Mini Screw Fixation of Phalangeal and Metacarpal Fractures & 53

fractures treated with percutaneous K-wire or open mini screw ﬁxation (21). Fractures were approached through a midlateral incision and, if necessary, the lateral band was excised. There were no differences between the two groups in outcomes for fracture union, functional recovery, or residual deformity. All fractures united and the patients returned to their previous jobs. Case reports of fracture union with excellent functional recovery using percutaneous or limited open incision of 1 to 2 cm and internal mini screw ﬁxation of oblique phalangeal shaft fractures have been published (42,43). More data and report replications are needed to determine the efﬁcacy of percutaneous mini screw application as compared to percutaneous K-wire or open K-wire or mini screw ﬁxation.

& Articular Fractures—Phalangeal Base CRIF with percutaneous K-wires are widely used to stabilize articular fractures of the phalangeal base. Larger fractures involving greater than 25% of the articular surface are typically quite accessible for percutaneous mini screw insertion, but few speciﬁc data are available for this speciﬁc fracture.

& SUMMARY & General Conclusions Clinical results for oblique phalangeal fractures treated with open mini screw ﬁxation compare favorably with those using percutaneous Kirchner wires (5,6,16,18,30,41). A midlateral approach avoiding incision of the dorsal apparatus, sparing of the gliding tissue between the periosteum and the extensor mechanism, increased stability, and earlier and more intensive therapy are among the factors that may explain these somewhat paradoxical equivalencies between percutaneous K-wire and open mini screw ﬁxation. Two case reports of percutaneous mini screw ﬁxation yielded excellent digital motion. Reports suggest that percutaneous mini screw ﬁxation may have an advantage over percutaneous K-wire or open K-wire or mini screw ﬁxation for treatment of undisplaced or adequately reduced closed simple oblique Bennett’s, phalangeal unicondylar, and articular phalangeal base articular fractures with large fragments (O25% of the articular surface), but those reports are not conclusive (44,45). Spiral fractures or smaller (!25% of the articular surface) articular fragments may be more challenging than uniplanar fractures or fractures with larger fragments. Cannulated headless mini screws may provide an advantage over conventional mini screw application. The surgeon should not hesitate to convert to an open procedure to assure an adequate fracture reduction or if technical difﬁculties arise with ﬁxation that cannot be salvaged with percutaneous K-wire ﬁxation.

& Future Direction of the Technique The validity of conclusions based upon the material cited in this chapter are confounded by a variety of shortcomings in study design; statistical power; enrollment; randomization; effect sizes; uniformity of selection, outcome criteria, and complication categories; failure to sort speciﬁc fracture conﬁgurations; blinding; bias; conﬁdence intervals; and replication (44–46). Greater enrollment is needed to detect beta errors (complications) reﬂecting minor, intermediate, and major trends (47,48). We need to know how many cases are converted to open procedures owing to failure of reduction or technical difﬁculties. Follow-up of a year or more is needed to attain an accurate assessment of the recovery of motion. The occurrence

of arthritis is related to the accuracy of reduction and its severity may be time-related (7,28,29). Long-term follow-up is needed to assess these parameters. Subjective patient outcome and cost analyses would be helpful. Logic would dictate that percutaneous procedures would be less likely to cause stiffness than open procedures and that fractures treated with mini screws might recover more motion and have less morbidity than those managed with K-wire ﬁxation. What are the absolute and relative overall speciﬁc complication rates among the procedures discussed? More data, improved study design, longer follow-up, higher levels of evidence, and unconﬂicted replication studies are needed to support or refute the relative risks and beneﬁts of percutaneous and open wire and mini screw techniques (44–49). At the highest level, a prospective double-blinded, randomized, controlled trial (RCT) could be initiated between or among methods currently considered equivalent or nearly equivalent. A single research question should be addressed, e.g. “Does percutaneous mini screw ﬁxation provide any advantage over percutaneous Kirchner wire ﬁxation in oblique proximal phalangeal shaft fractures as determined by total active range of digital motion at one year after injury?” A pre-study power analysis should be done to assure adequate enrollment for statistical validity. A multi-center study may be necessary to assure adequate enrollment, with the caveat that multi-center studies have unique inherent deﬁciencies (44,45). Uniform selection and evaluation criteria and comprehensive complication reports are essential. RCTs may not be practical owing to issues of enrollment, time, and cost. Alternatively, more carefully designed prospective consecutive case series with adequate enrollment, blinded evaluation of results, and at least 1 year of follow-up would improve upon our current level of evidence.

& SUMMATION POINTS

Indications & & & &

Bennett’s fractures with large fragments (O25% of the articular surface). Unicondylar phalangeal fractures with large fragments (O25% of the articular surface). Oblique phalangeal shaft fractures. Articular phalangeal base fractures with large fragments (O25% of the articular surface).

Outcomes & & &

No nonunions to date. No loss of reduction to date. Slightly less residual PIPJ and digital stiffness.

Complications: Reported to Date

(Key: None; Rare, !5%; Occasional, 5–10%, Frequent, O10%) & & & & & & & & & &

Inadequate reduction: none. Conversion to an open procedure: none. Loss of reduction: none. Technical problems with implant insertion: none. Stiffness: frequent. Cold intolerance: none. Nonunion: none. Malunion: none. Dystrophy: none. Arthritis: none.

54 & Freeland and Geissler

& REFERENCES 1. 2. 3. 4. 5. 6. 7. 8.

9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20.

21.

22. 23. 24.

Freeland AE, Geissler WB, Weiss APC. Operative treatment of common displaced and unstable fractures of the hand. J Bone Joint Surg [Am] 2001; 83(6):927–45. Barton NJ. Fractures of the shafts of the phalanges of the hand. Hand 1979; 11(2):119–33. Barton NJ. Fractures of the hand. J Bone Joint Surg [Br] 1984; 66(2):159–67. Barton N. Conservative treatment of articular fractures of the hand. J Hand Surg [Am] 1989; 14(2):386–90. Belsky MR, Eaton RG, Lane LB. Closed reduction and internal ﬁxation of proximal phalangeal fractures. J Hand Surg [Am] 1984; 9(5):725–9. Green DP, Anderson JR. Closed reduction and percutaneous pin ﬁxation of fractured phalanges. J Bone Joint Surg [Am] 1973; 55(8):1651–4. O’Rourke SK, Gaur S, Barton NJ. Long-term outcome of articular fractures of the phalanges: an eleven-year follow-up. J Hand Surg [Am] 1989; 14(2):183–93. Perren SM. Evolution of the internal ﬁxation of long bone fractures. The scientiﬁc basis of biological internal ﬁxation: choosing a new balance between stability and biology. J Bone Joint Surg [Br] 2002; 84(8):1093–110. Roth JJ, Auerbach DM. Fixation of hand fractures with bicortical screws. J Hand Surg [Am] 2005; 30(1):151–3. Geissler W, Freeland AE. Intra-articular fractures of the phalanges and thumb. Orthop Suppl 2002; 25(12):1455. Johnson EC. Fractures of the base of the thumb: a new method of ﬁxation. JAMA 1944; 126:27–8. Gedda KO. Studies on Bennett’s fracture: anatomy, roentgenology, and therapy. Acta Chir Scand Suppl 1954; 193:1–114. Gedda KO, Moberg E. Open reduction and osteosynthesis of the so-called Bennett’s fracture in the carpometacarpal joint of the thumb. Acta Orthop Scand 1953; 22(3):249–57. Hall RF, Jr. Treatment of metacarpal and phalangeal fractures in noncompliant patients. Clin Orthop Relat Res 1987; 214:31–6. Freeland AE, Benoist LA. Open reduction and internal ﬁxation method for fractures at the proximal interphalangeal joint. Hand Clin 1994; 10(2):241. Freeland AE, Benoist LA. Open reduction and internal ﬁxation method for fractures at the proximal interphalangeal joint. Hand Clin 1994; 10(2):242. Freeland AE, Benoist LA. Open reduction and internal ﬁxation method for fractures at the proximal interphalangeal joint. Hand Clin 1994; 10(2):239–50. Freeland AE. Spiral oblique fractures. In: Kasdan ML, Amadio PC, Bowers WH, eds. Technical Tips for Hand Surgery. Philadelphia: Hanley and Belfus, 1994:135. Dabezies EJ, Schutte JP. Fixation of metacarpal and phalangeal fractures with miniature plates and screws. J Hand Surg [Am] 1986; 11(2):283–8. Freeland AE, Sud V, Lindley SG. Unilateral intrinsic resection of the lateral band and oblique ﬁbers of the metacarpophalangeal joint for proximal phalangeal fracture. Tech Hand Up Extrem Surg 2001; 5:85–90. Horton TC, Hatton M, Davis TR. A prospective randomized controlled study of ﬁxation of long oblique and spiral shaft fractures of the proximal phalanx: closed reduction and percutaneous Kirschner wiring versus open reduction and lag screw ﬁxation. J Hand Surg [Br] 2003; 28(1):5–9. Freeland AE, Hardy MA, Singletary S. Rehabilitation for proximal phalangeal fractures. J Hand Ther 2003; 16(2):129–42. Hardy MA. Principles of metacarpal and phalangeal fracture management: A review of rehabilitation concepts. J Orthop Sports Phys Ther 2004; 34(12):781–99. Strickland JW, Steichen JB, Kleinman WB, et al. Phalangeal fractures: factors inﬂuencing digital performance. Orthop Rev 1982; 9:39–50.

25. Feehan LM, Bassett K. Is there evidence for early mobilization following an extraarticular hand fracture? J Hand Ther 2004; 17(2):300–8. 26. Duran RS, Houser RG. Controlled passive motion following ﬂexor tendon repair in zones two and three. AAOS Symposium on Flexor Tendon Surgery in the Hand. St. Louis, MO: Mosby, 1975:105–114. 27. Brand PW, Hollister AM. Clinical Mechanics of the Hand. 3rd ed. Philadelphia, PA: Mosby, 1999:61–99. 28. Kjaer-Petersen K, Langhoff O, Andersen K. Bennett’s fracture. J Hand Surg [Br] 1990; 15(1):58–61. 29. Livesley PJ. The conservative management of Bennett’s fracturedislocation: a 26-year follow-up. J Hand Surg [Br] 1990; 15(3):291–4. 30. Ford DJ, el-Hadidi S, Lunn PG, et al. Fractures of the phalanges: results of internal ﬁxation using 1.5 mm and 2 mm A. O. screws. J Hand Surg [Br] 1987; 12(1):28–33. 31. Fambrough RA, Green DP. Tendon rupture as a complication of screw ﬁxation in fractures of the hand. A case report. J Bone Joint Surg [Am] 1979; 61(5):781–2. 32. Kilbourne BC, Paul EG. The use of small bone screws in the treatment of metacarpal, metatarsal, and phalangeal fractures. J Bone Joint Surg [Am] 1958; 40(2):375–83. 33. Crawford GP. Screw ﬁxation for certain fractures of the phalanges and metacarpals. J Bone Joint Surg [Am] 1976; 58(4):487–92. 34. Wagner CJ. Methods of treatment of Bennett’s fracture dislocation. Am J Surg 1950; 80(2):230–1. 35. Hughes AW. Bennett’s fractures ﬁxed using the Herbert scaphoid screw. J R Coll Surg Edinb 1985; 30(4):231–3. 36. Stromberg L. Compression ﬁxation of Bennett’s fracture. Acta Orthop Scand 1977; 48(6):586–91. 37. Lutz M, Sailer R, Zimmermann R, et al. Closed reduction transarticular Kirschner wire ﬁxation versus open reduction internal ﬁxation in the treatment of Bennett’s fracture dislocation. J Hand Surg [Br] 2003; 28(2):142–7. 38. Meyer C, Hartmann B, Bohringer G, et al. Minimal invasive cannulated screw osteosynthesis of Bennett’s fractures. Zentralbl Chir 2003; 128(6):529–33. 39. Weiss AP, Hastings H, II. Distal unicondylar fractures of the proximal phalanx. J Hand Surg [Am] 1993; 18(4):594–9. 40. Widgerow AD, Edinburg M, Biddulph SL. An analysis of proximal phalangeal fractures. J Hand Surg [Am] 1987; 12(1):134–9. 41. Diwaker HN, Stothard J. The role of internal ﬁxation in closed fractures of the proximal phalanges and metacarpals in adults. J Hand Surg [Br] 1986; 11(1):103–8. 42. Freeland AE, Benoist LA, Melancon KP. Parallel miniature screw ﬁxation of spiral and long oblique hand phalangeal fractures. Orthopedics 1994; 17(2):199–200. 43. Freeland AE, Roberts TS. Percutaneous screw treatment of spiral oblique ﬁnger proximal phalangeal fractures. Orthopedics 1991; 14(3):384–8. 44. Ioannidis JP. Contradicted and initially stronger effects in highly cited clinical research. JAMA 2005; 294(2):218–28. 45. Ioannidis JP. Why most published research ﬁndings are false. PLoS Med 2005; 2(8):e124. 46. Bhandari M, Morrow F, Kulkarni AV, et al. Meta-analyses in orthopaedic surgery: a systemic review of their methodologies. J Bone Joint Surg [Am] 2001; 83(1):15–24. 47. Freedman KB, Back S, Bernstein J. Sample size and statistical power of randomised controlled trials in orthopedics. J Bone Joint Surg [Br] 2001; 83(3):397–402. 48. Lochner HV, Bhandari M, Tornetta P, III. Type-II error rates (beta errors) of randomized trials in orthopaedic trauma. J Bone Joint Surg [Am] 2001; 83(11):1650–5. 49. Bernstein J. Evidence-based medicine. J Am Acad Orthop Surg 2004; 12(2):80–8.

8 Intramedullary Rodding of Metacarpal and Phalangeal Fractures Jorge L. Orbay, Amel Touhami, and Igon Indriago

Miami Hand Center, Miami, Florida, U.S.A.

& INTRODUCTION Fractures of the long bones of the hand are of special interest because of their frequency and their propensity to result in functional loss. Closed treatment has been the mainstay of management for these injuries but the failure of nonoperative treatment on the more unstable fractures has prompted the utilization of surgical methods. Internal ﬁxation provides improved ﬁnal reductions but involves a trade off with iatrogenic soft tissue injury. Flexible intramedullary (IM) nailing of extra-articular metacarpal (MC) and proximal phalangeal fractures provides ample ﬁxation while avoiding the soft tissue injury associated with plate and screw application. Percutaneous IM Kirschner (K) wire ﬁxation was ﬁrst advocated in 1953 by Vom Saal (1) who introduced the wire in a retrograde fashion through the ﬂexed distal joint. Clifford (2) used Vom Saal’s method successfully in 36 patients with phalangeal or MC fractures. In 1976, anterograde MC K-wire ﬁxation was reported by Foucher (3,4); it was explained as a “bouquet” osteosynthesis or as a method of “fasciculated IM pinning” for MC fractures. The fractures were to be reduced and closed, and multiple ﬂexible pins were passed anterograde inside the medullary canal and into the MC head. It avoided both the opening of the fracture site as well as injury to the soft tissues around the metacarpophalangeal (MP) joint. Although the bouquet technique adequately controlled rotation at the fracture site, its main drawback was pin migration, shortening and the inability to support comminuted or spiral fractures. To overcome these limitations, new strategies were developed such as those suggested in 1981 by Vives et al. (5) who combined an axial pin introduced through the base of the MC with an antirotation transverse pin through the heads of the MCs. Gonzalez and Hall ﬁxed transverse or short oblique fractures by using pre-bent ﬂexible IM nails similar to Ender nails, instead of K-wires (6,7). To improve rotational stability and minimize shortening, Orbay et al. (8,9) enhanced ﬁxation of ﬂexible nails by adding a proximal locking pin. This feature broadened the indications for the procedure to include long oblique, spiral and comminuted fractures. In summary, over the past three decades, closed ﬂexible IM nailing has evolved as an alternative to plating techniques to treat simple and complex extra-articular fractures of the long bones of the hand.

& INDICATIONS & Speciﬁc Diagnoses

Phalangeal Fractures

Although simple fractures can be treated successfully with closed methods, proximal phalanx fractures can result in

unacceptable deformity and loss of proximal interphalangeal (PIP) joint function. IM nail ﬁxation is particularly beneﬁcial for the proximal phalanx where the extensor tendon is very prone to develop post-surgical adhesions. Most extra-articular fractures are good candidates for the technique. Hyperextension injuries can produce proximal transverse fracture patterns; these are usually stable and amenable to close treatment. Transverse and short oblique fractures of the midproximal phalanx are optimal fracture types; these injuries are potentially unstable in rotation therefore, either two nonlocked nails or a single proximally locked nail should be used. Long oblique, spiral, or comminuted proximal phalanx fractures can result in excessive shortening (more than 5 mm) and produce an extensor lag. These fractures are also satisfactory indications, but a proximal locking pin is typically necessary to provide adequate stability. Transverse fractures of the distal phalangeal shaft or neck are a distinct subtype that can be adequately treated with two nails. Those patients presenting with a chronic fracture, a nascent, or established malunion may also be treated with reconstructive surgery using ﬂexible IM nailing, provided that the fracture is exposed through a formal incision and the callus released or excised. Open fractures with massive soft tissue damage are usually best treated by more rigid forms of ﬁxation as the presenting wounds provide the necessary exposure, and ﬂexible nails do not provide an advantage.

MC Fractures

Most simple extra-articular MC fractures will proceed to healing uneventfully with nonoperative treatment (10). However, some MC fractures will require ﬁxation when an adequate reduction cannot be maintained by closed methods. Persistent angulation, after closed reduction, in excess of 458 for the small ﬁnger, 308 in the ring ﬁnger, and 208 in the middle and index ﬁngers; projection of the MC head into the palm; clawing on extension of the fractured digit; signiﬁcant loss of knuckle contour and MC shortening of more than 5 mm; all constitute good indications for operative treatment. Most extra-articular MC fractures that can be manipulated into an acceptable reduction will be good candidates for closed ﬂexible IM nailing. Transverse fractures of the MC shafts are usually longitudinally and rotationally stable after reduction; therefore, a single unlocked nail will provide the necessary stability (Fig. 1). Likewise, the patient with multiple transverse MC fractures is a good candidate for this procedure. Patients with MC neck fractures, if severely displaced or multiple, beneﬁt from this form of treatment. Because of the small size of the distal fragment, proximal locking prevents nail back-out and therefore, loss of ﬁxation. Spiral, long oblique, and comminuted fractures can be both rotationally and longitudinally

56 & Orbay et al.

previous or active osteomyelitis in the same bone, and patients who cannot cooperate are not amenable to IM nailing. Furthermore, inability to obtain closed reduction constitutes a contraindication to close IM nailing but not to open nailing.

Relative Contraindications

Patients with osteoporosis, tendon injury, and open fractures with minimal or moderate soft tissue injury are still good candidates for IM nailing provided the device is proximally locked and the associated injuries repaired. Non-locked IM nailing is not ideal for long oblique and spiral fractures, comminuted fractures, or fractures in osteoporotic bone as shortening or nail back out can occur. Open MC fractures with massive skin, tendon, and bony loss often require plate ﬁxation in order to provide rigid stability and apply an intercalated bone graft. In contrast, MC neck fractures are seldom plated due to the inherent surgical morbidity but can be adequately treated with closed ﬂexible IM nailing. FIGURE 1 Transverse fractures of the metacarpal shafts may only require a single unlocked nail.

unstable; therefore, proximal nail locking is usually necessary (Fig. 2). Established or nascent malunions will respond to callus debridement through a small incision and IM ﬁxation. Open fractures can be treated with this method but again the beneﬁts of ﬂexible IM ﬁxation decrease with the extent of the softtissue defect.

& PREOPERATIVE PLANNING & Preoperative Physical Examination A number of parameters should be evaluated in the physical examination including: &

Evaluate deformity: & & &

& Contraindications

Absolute Contraindications

Intra-articular involvement of both the proximal and distal ends of the MC, open fractures with massive soft tissue injury especially those with bone loss, local or systemic infections,

Assess active range of motion

& &

Angulation Shortening Malrotation (poorly tolerated and difﬁcult to assess on plain radiographs, is best judged clinically by asking the patient to simultaneously ﬂex all the ﬁngers as the surgeon watches for scissoring or digital overlapping) A loss of knuckle contour Pseudoclawing (compensatory MP hyperextension and PIP ﬂexion)

FIGURE 2 Spiral, long oblique, and comminuted metacarpal fractures can be both rotationally and longitudinally unstable. A locked nail is usually necessary.

Intramedullary Rodding of Metacarpal and Phalangeal Fractures & 57 & &

Assess integrity of soft tissue sleeve and ﬂexor and extensor tendons Assess swelling and neurovascular status.

Speciﬁc Consideration for the Technique

The surgeon must assess if the fracture can be reduced by closed manipulation. This is ultimately done in the operating room (OR) under ﬂuoroscopy and anesthesia, but a good estimate of the ease of reduction can be made during the physical examination by assessing the extent of the healing process and the acuteness of the inﬂammatory response.

& Preoperative Imaging

Plain Films

Most MC and phalangeal fractures are readily diagnosed with standard posteroanterior and lateral radiographs. Lateral views may be difﬁcult to interpret because of the overlying adjacent MC bones. In this case, oblique views will be helpful. Angular malalignment is radiographically apparent in either the coronal or sagittal plane. Rotational malalignment is best assessed by clinical means.

Advanced Imaging

Cross-sectional imaging, and particularly computed tomography, permits multiplanar analysis of any fracture but are rarely useful in the assessment of these fractures. In the OR, the use of a ﬂuoroscopy unit is essential in order to perform this procedure. Portable mini-ﬂuoroscopy units have been shown to reduce radiation exposure and operating time substantially.

& SURGICAL TECHNIQUE & OR Setup and Equipment Closed IM nailing is usually performed in a formal OR where a mini C-arm ﬂuoroscopy unit is available and using local or regional anesthesia. The hand is draped sterile over a hand table and it is ﬁrst conﬁrmed that the fracture can be reduced by closed manipulation. If the fracture is not reducible, an open form of IM nailing must be chosen. The sterilely draped mini C-arm is brought into the ﬁeld as necessary. Pre-bent ﬂexible IM nails have a blunt tip and come in a sterile peel pack which includes a bending and exchange tool and an implantable radiopaque nail cap to protect the soft tissues from the sharp cut end of the nail (SBFS. Hand Innovations-Depuy. Miami, Florida, U.S.A.). Nails measuring 1.1 or 1.6 mm in diameter are available in the system and come attached to a handle. Selection of nails is determined by the size of the involved phalanx or MC.

& Operative Approach

MC Fractures

First, the location of the introductory portal is decided by placing, under ﬂuoroscopy, the tip of a Mosquito forceps over the hand. A small 5 to 10 mm skin incision is made at the level of the proximal aspect of the fractured MC bone (Fig. 3). MCs 2, 3, and 4 are usually approached from the dorsal aspect; MCs 1 and 5 are usually approached from the radial and ulnar sides, respectively. Careful spreading of the soft tissues is particularly important with fractures of the third and fourth MCs because these digital extensor tendons are in, particularly, close proximity to the nail insertion site.

The medullary canal is accessed with the aid of a specially designed awl that also serves to deliver the nail. These two parts come assembled as a unit. The dorsal metaphyseal cortex is perforated with this awl and the nail is deployed into the medullary canal. The nail is then advanced to the level of the fracture site; the fracture is manipulated and reduced under ﬂuoroscopic guidance and the nail driven into the distal fragment (Fig. 4). If necessary, the nail can be removed and the curvature of the nail modiﬁed to achieve 3-point ﬁxation or to better negotiate the fracture. Reduction of MC fractures is facilitated by ﬂexing the MP joint 908 to tighten the collateral ligaments and stabilize the distal fragment. After nail insertion, rotational alignment should be checked by moving the ﬁngers into a ﬁst. Longitudinal traction and direct manipulation are the mainstays in correction of fracture displacement. The nail is ﬁnally advanced into the subchondral bone of the MC head where additional rotation of the nail can assist in the ﬁnal reduction. Compression is applied axially across the fracture site to prevent distraction. Once the surgeon is satisﬁed with reduction and nail placement, the decision to whether to lock or not to lock the nail is made. Locking the nail proximally greatly enhances rotational and longitudinal stability therefore; locking is desirable in the case of oblique, spiral or comminuted fractures. If locking is not indicated, as in the case of a transverse or short oblique MC shaft fracture, the surgeon cuts the handle off the nail, bends the proximal end to facilitate later retrieval, and cuts the remaining end off beneath the skin to prevent pin tract infection. If locking technique is used, a proximal locking sleeve is slipped over the bent end of the nail and driven transversely into the proximal metaphysis (Fig. 5). Fluoroscopic guidance is necessary for this step. When the locking pin contacts the volar cortex, resistance is encountered, indicating that the device is appropriately seated. Small teeth engage the locking pin to the nail preventing component disengagement during rehabilitation. Next, the nail and locking pin are cut below the skin and covered with the radiopaque plastic cap (Fig. 6). This step is important in order to protect the extensor tendons. For the majority of rotationally stable fractures, either a single locked or an unlocked IM nail is used. In the face of signiﬁcant rotational instability, either a locked nail or multiple nails are inserted. Multiple nails are used if persistent instability of the fracture is encountered following the insertion of a single nail especially if the patient has an excessively large IM canal.

Proximal Phalanx Fractures

Reduction of fractures of the proximal phalanx is facilitated by ﬂexing the MP joint 908, so that the collateral ligaments stabilize the proximal fragment, the distal fragment is then reduced onto the proximal fragment. The ﬁnger can then be used to derotate the distal fragment. Proximal phalanxes are approached from either dorsal or lateral aspects and necessitate a limited splitting of the extensor expansion. Soft tissues including extensor tendons are mobilized bluntly and dissection is carried down to the bone surface. For transverse and short oblique fractures of the proximal phalanx, two nonlocked nails (Fig. 7) or a proximally locked nail should be used. If the fracture pattern is long oblique or spiral, a proximal locking pin is typically necessary to provide adequate stability (Fig. 8).

& Closure and Post-Operative Management Intraoperatively, a post-operative sterile dressing that blocks the MP joints in ﬂexion is applied. This post-operative dressing is

58 & Orbay et al.

FIGURE 3 A fracture of the fourth and ﬁfth MC. First, a small 5 to 10 mm skin incision is made at the level of the proximal aspect of the fractured MC. Abbreviation: MC, metacarpal.

removed at approximately one week after surgery. When a nonlocking device has been used for a MC, the hand may be supported for four weeks with an MP ﬂexion block splint or cast that allows interphalangeal (IP) motion. The use of a locking device for MC fractures allows unsupported MP and PIP joint motion, thus splinting is not required. In contrast, some form of splinting: buddy taping, PIP extension, or MP block, alone or in combination, is usually used for all proximal phalangeal fractures and also, more careful physical therapy is necessary. After radiological conﬁrmation of bone healing (usually between four and eight weeks) all nails are routinely removed, usually in the OR, using local anesthetic and sterile technique.

& COMPLICATIONS AND THEIR MANAGEMENT & Pitfalls

Inadequate Reduction

FIGURE 4 The nail is then advanced to the level of the fracture site; the fracture is reduced and the nail driven into the distal fragment.

Malrotation is the most likely form of malreduction. This is a more pressing point with phalangeal fractures but can occur with spiral fractures of the MCs. Careful attention to clinical

Intramedullary Rodding of Metacarpal and Phalangeal Fractures & 59

This is a particularly important issue in proximal phalanx fractures due to the resulting extensor lag. Fixation in overdistraction can also occur and result in problems with bone healing.

Poor Fixation

Fixation failure is uncommon with IM rodding of hand fractures but can occur in rotation, particularly with proximal phalanx fractures, if not supported properly. It can also involve longitudinal collapse if unstable fractures are treated with an unlocked nail and backing out occurs or if a locked nail penetrates through the MC head. FIGURE 5 If locking technique is chosen, a proximal locking sleeve is slipped over the bent end of the nail and driven transversely into the proximal metaphysis.

rotation is imperative. The use of MP block splints corrects malrotation of the MCs and buddy splints, sometimes in combination with an MP block splint, will support the proper rotation in a phalangeal fracture. Because the rotational stability of IM nails is limited, errors of reduction can be corrected by remanipulation and supported by subsequent splinting. Angular malreduction is less likely with IM nails. Loss of length can occur for spiral or comminuted fractures.

Penetration of the Nail

Through the MC head can occur in very distal fractures especially in patients with osteopenic bone. Avoiding placement of the nail tip against the subchondral bone and instead placing the bend of the nail against it or the use of multiple nails can help avoid this problem. This complication is treated by nail removal after the fracture is healed.

Excessive Distraction

Of the fracture can result in a delayed union. With either locked or unlocked technique, the surgeon must be careful to impact

FIGURE 6 After ﬁxation is completed, the nail and locking pin are cut below the skin and covered with the radiopaque plastic cap in order to protect the soft tissues.

60 & Orbay et al.

FIGURE 7 Transverse and short oblique fractures of the mid-proximal phalanx are unstable in rotation; either two non-locked nails or a proximally locked nail will provide stability.

the fragments at the fracture site to prevent this problem after inserting the nail.

Soft Tissue Injury

In the case of a fracture of the long or ring ﬁnger MC, the proximal end of the nail is located in the vicinity of the extensor tendons, raising the danger of tendon irritation or even rupture. This can occur due to mechanical attrition against the raw metal surface of the cut end of the nail. For these fractures, the use of an MP ﬂexion block splint may minimize excursion of the extrinsic extensors and therefore the likelihood of tendon problems during rehabilitation. Tendon injury can be deﬁnitely prevented by using a protective soft tissue plastic cap that covers the cut end of the nail and provides a safe gliding surface. Cases of serious tendon irritation are best managed by early pin removal, tendon rupture will require repair. In the case of proximal phalangeal fractures, the tendon is very broad and has a very short

excursion; for this reason, rupture does not occur but adhesion of the extensor expansion may limit PIP motion.

Malunion

It is the result of untreated malreduction and may require osteotomy.

& Bailouts

Stiffness

Careful follow-up of patients will allow the surgeon to identify those patients who are at risk for this problem. Stiffness is a complex problem that includes injury and personality related factors. Much can be done to prevent and treat it. Communication with the patient and a good therapist is essential for success. The MP joints, in susceptible individuals, will tend to ankylose into extension after MC fractures; this tendency is easily corrected by placing the hand in an MP block splint that

FIGURE 8 Long oblique, spiral, or comminuted proximal phalanx fractures can result in excessive shortening (more than 5 mm) and extensor lag. These fractures will require at least one proximal locked nail.

Intramedullary Rodding of Metacarpal and Phalangeal Fractures & 61

allows free IP motion. The PIP joints of most patients will tend to ankylose into ﬂexion after proximal phalangeal fractures. This is a vexing problem with no easy solution that is aggravated by the extensor lag that results from phalangeal shortening. Encouraging active motion may be helpful in mild cases. PIP extension splinting and hands-on therapy are the mainstays of treatment. In severe cases, dynamic or progressive splints are necessary. Complex Regional Pain Syndrome is an extreme condition of the stiffness spectrum; here, referral to a pain specialist for sympathetic blocks is very effective when done early enough. Occasionally, a capsular release can be done as a salvage procedure for the long established PIP ﬂexion contracture.

In MC or phalangeal fractures this problem is uncommon, although delayed union is occasionally seen as a result of distraction at the fracture site. Infection and bone loss are predisposing factors to nonunion. Operative intervention is advised four months after the injury because additional immobilization is likely to cause signiﬁcant stiffness. Intercalated bone grafting and plate ﬁxation will maintain length and provide stable ﬁxation.

shaft, neck and oblique, spiral or comminuted. We evaluated total digital active motion, grip strength, residual deformity, and remaining pain using the visual analog scale (VAS). Anteroposterior and lateral radiographs were also assessed for healing and residual displacement of the fracture. Residual shortening was measured according to the method described by Manueddu and Della Santa (12). Our study was limited by being retrospective in nature and by the fact that the indications for the procedure evolved over time. The ability to lock the nails expanded the indications to fractures previously not considered suitable for IM ﬁxation. Our data suggested that both methods were similar, with the only statistically signiﬁcant difference (p!0.05) noted in our treatment groups being in the average time to recovery. The locking treatment group averaged 5.6 weeks, compared with 5.9 weeks for the non-locking treatment group. Phalangeal fractures proved to be challenging, and did necessitate an additional splinting even with the use of a locking device as opposed to the MCs. Indeed, at ﬁnal follow up, loss of PIP joint extension was common averaging 208 (range 5–358) for the non-locking treatment group and 178 (range 5–308) for the locking treatment group, while all MC patients had regained full MP extension with no extensor lag or pseudoclawing. All patients were able to reach the palm with their ﬁngertip in both treatment groups. Finally, both MC treatment groups were statistically comparable in terms of their average grip strength and their VAS. Although this data showed that multiple nails, proper splinting, or the use of single locked nails are all acceptable methods for maintaining adequate rotational alignment in unstable fractures, only a proximally locked nail proved to be adequate for preventing collapse in longitudinally unstable fractures. Complications were few: a delayed union for more than eight weeks was observed in two patients in the non-locking treatment group with transverse MC shaft fractures and one patient in the locking treatment group with a spiral proximal phalanx fracture, probably subsequent to an over distraction at the fracture site. Two patients in each group experienced extensor tendon irritation after ﬁxation of the third or fourth MC; these two cases belonged to the non-locking treatment group where the plastic protector caps had not been used. These cases were managed by early pin removal. Penetration of the wire through the MC head and into the MP joint was observed in three patients who were older than 65 years, these also required early pin removal; one in the non-locking treatment group and two in the locking treatment group. Interestingly, persistent pain, sensory dysfunction, residual rotational deformity, malalignment, clinically signiﬁcant angular malunion, nonunion or infection, were not observed in either treatment groups.

Infection

& SUMMARY

Malunion

A fracture that heals with rotational malreduction results in signiﬁcant functional impairment. This problem is best avoided by paying attention in the operative theater to correct rotation and by careful patient follow up; which will not only reveal patients at risk of stiffness but also those with malreduction. Clinical inspection of the hand as the digits move from full extension into full ﬂexion will demonstrate the presence of these two problems. Interestingly, stiffness and rotational malreduction often occur simultaneously; this occurs because full functional motion of the digits tends to correct rotational malalignment of both MC and proximal phalanx fractures. Prior to fracture healing, MP block splinting and active IP motion can correct rotational malreduction in MC fractures. Phalangeal fractures may respond to a combination of MP block splinting and buddy splinting. After fracture healing in a malrotated position, osteotomy is the only possible salvage.

PIP Joint Extensor Lag

True extensor lag as opposed to PIP ﬂexion contracture is due to phalangeal shortening. There is no effective treatment for this condition except for prevention by accurate reduction.

& Nonunion

Post-operative infection is uncommonly encountered after closed hand fractures are treated with internal ﬁxation. Those observed were associated with pins that protruded through the skin. Pin removal should be done when allowed by fracture stability. Antibiotics whether oral or intravenous can be temporizing until fracture stability is achieved.

& OUTCOMES We recently reported (11) our results in 125 unstable closed fractures of the proximal phalanges and MCs. Of these fractures, 95 (76 MC and 19 proximal phalanges) were treated by a locking ﬂexible pre-bent IM nails, 55 fractures (34 MC and 21 proximal phalanges) were treated with a non-locking ﬂexible pre-bent IM nail. In both groups, fractures patterns were similar: transverse

& General Conclusions Locked or unlocked ﬂexible IM nailing of the MC and phalangeal fractures is a minimally invasive technique that saves OR time, minimizes soft tissue dissection, limits scarring and avoids exposure of the fracture. This procedure has a low complication rate and provides good functional results.

& Future Direction of the Technique The use of proximally locked nails may safely extend the indications to rotationally and longitudinally unstable fractures (long oblique, spiral and comminuted fracture patterns) and minimizes the need for post-operative splinting in MC fractures. The ability to lock the distal aspect of the nail will

62 & Orbay et al.

further improve stability and hopefully enhance recovery in patients with fractures of the long bones of the hand.

& SUMMATION POINTS

Indications

Most displaced/unstable extra-articular fractures of the MCs and the proximal phalanxes including those with the following patterns: & & & &

Transverse fractures MC neck Oblique/spiral fractures Comminuted fractures, provided that the comminution is limited to the mid diaphyseal segment.

Outcomes & &

&

Overall, hand function after MC fracture ﬁxation very closely approximates that of the intact hand. In contrast, function after proximal phalangeal fracture ﬁxation frequently results in at least a mild permanent deﬁcit, typically in the form of loss of PIP extension. The management of proximal phalanx fractures proves a greater challenge to the surgeon than the management of MC fractures.

Complications & & &

Delayed union Extensor tendon irritation especially for the third and fourth MCs Penetration of the nail through the MC head and into the MP joint.

& REFERENCES 1. Vom Saal FH. Intramedullary ﬁxation in fractures of the hand and ﬁngers. J Bone Joint Surg Am 1953; 35-A(1):5–16. 2. Clifford RH. Intramedullary wire ﬁxation of hand fractures. Plast Reconstr Surg 1953; 11(5):366–71. 3. Foucher G, Chemorin C, Sibilly A. A new technic of osteosynthesis in fractures of the distal 3d of the 5th metacarpus. Nouv Presse Med 1976; 5(17):1139–40. 4. Foucher G. “Bouquet” osteosynthesis in metacarpal neck fractures: a series of 66 patients. J Hand Surg [Am] 1995; 20(3 Pt 2):S86–90. 5. Vives P, Robbe M, Dorde T, De LM. A new treatment for fractures of the neck of the metacarpals by double pinning (author’s transl). Ann Chir 1981; 25(9 Pt 2):779–82. 6. Gonzalez MH, Igram CM, Hall RF, Jr. Flexible intramedullary nailing for metacarpal fractures. J Hand Surg [Am] 1995; 20(3):382–7. 7. Gonzalez MH, Igram CM, Hall RF. Intramedullary nailing of proximal phalangeal fractures. J Hand Surg [Am] 1995; 20(5):808–12. 8. Orbay JL, Indriago IR, Gonzalez E, Badia A, Khouri R. Percutaneous ﬁxation of metacarpal fractures. Oper Tech Plast Reconstr Surg 2002; 9(4):138–42. 9. Orbay J. Intramedullary nailing of metacarpal shaft fractures. Tech Hand Up Extrem Surg 2005; 9(2):69–73. 10. Barton N. Conservative treatment of articular fractures in the hand. J Hand Surg [Am] 1989; 14(2 Pt 2):386–90. 11. Orbay JL, Touhami A. The treatment of unstable metacarpal and phalangeal shaft fractures with ﬂexible nonlocking and locking intramedullary nails. Hand Clin 2006; 22(3):279–86. 12. Manueddu CA, Della SD. Fasciculated intramedullary pinning of metacarpal fractures. J Hand Surg [Br] 1996; 21(2):230–6.

9 Hinged Fixation and Dynamic Traction of PIP Fracture Dislocations Kenneth R. Means, Jr., James P. Higgins, and Thomas J. Graham

The Curtis National Hand Center, Union Memorial Hospital, Baltimore, Maryland, U.S.A.

& INTRODUCTION

& INDICATIONS

Any surgeon who has attempted to treat complex injuries of the proximal interphalangeal joint (PIPJ) of a ﬁnger knows the difﬁculties inherent to the task. Perhaps in no other area of treatment in the upper extremity is the desire to achieve “minimally invasive” management more germane. This aspiration stems from the intrinsic nature of the PIPJ to become exceedingly stiff and lose function following most open, or “maximally invasive,” interventions. However, speciﬁc challenges must be met for such treatment to be successful. These include establishment of a stable joint, the ability to begin active range of motion as soon as possible, and, perhaps to a lesser degree, restoration of joint congruity (1–3). Hinged ﬁxation and dynamic traction can potentially achieve these goals through indirect joint reduction via ligamentotaxis and by providing a construct that allows immediate range of motion. The endeavor to create minimally invasive options for PIPJ fracture dislocations is a process that has gone through several stages. Dynamic traction external ﬁxation mechanisms began with the “homemade” use of various combinations of pins, methylmethacrylate rods, springs, or rubber bands, and included Schenk’s dynamic traction device with its circular frame requiring construction by a certiﬁed hand therapist (4). Lower proﬁle styles were later developed and have included the Agee force couple system and other hinged dynamic external ﬁxators popularized by Slade, Suzuki, Inanami, and others (5–8). The force couple process uses three Kirschner (K) wires and a rubber band and is designed to reduce the head of the proximal phalanx dorsally and the base of the middle phalanx volarly. This and other hinged dynamic external ﬁxators are built around the center of axis of rotation of the PIPJ, which lies within the head of the proximal phalanx. These methods are low in cost and readily available to the surgeon. However, some have found them to be difﬁcult to create and even more challenging to establish and maintain a reliably stable PIPJ during range of motion. Some have also felt them to be cumbersome to patients (9). In addition, there are certain restrictions to their use. For example, use of the Agee force couple splint requires a stable dorsal portion of the base of the middle phalanx to resist axial and dorsal displacement of the PIPJ (1). Some of the complications and limitations encountered with these techniques led to the development of more biomechanically robust and more easily reproduced alternatives. These commercially offered systems consist of the Smith & Nephew Proximal Interphalangeal Hinge, often referred to as the Compass Hinge (Memphis, Tennessee, U.S.A.) and the Biomet BioSymMetRic PIP Fixator (Warsaw, Indiana, U.S.A.) (Fig. 1) (9).

The most common usage of hinged ﬁxation dynamic traction is in the treatment of complex PIPJ fractures, dislocations, and fracture-dislocations. These include unstable dislocations treated in open or closed fashion to attain reduction. Also, surgeons treating fractures or fracture-dislocations involving the base of the middle phalanx and, less commonly, the distal aspect of the proximal phalanx may use dynamic traction as a sole method or in combination with open procedures and ﬁxation as a force neutralization mechanism. Most commonly the technique is used for “pilon”-type fractures or fracturedislocations of the base of the middle phalanx where there is extensive comminution and instability that is not amenable to other ﬁxation options or requires supplementation for stability or force neutralization during early active range of motion. Hinged dynamic traction may also be used following release of a PIPJ contracture, volar plate arthroplasty of the PIPJ, or percutaneous ﬁxation of the PIPJ (10). The remainder of this chapter will focus on use of hinged ﬁxator systems for treatment of the traumatic injuries to the PIPJ mentioned above. Further reﬁnement of the indications for these techniques must include a caution that they should be used only for complex PIPJ injuries. Simple dislocations or fracture-dislocations that are stable once reduced may be treated in a standard manner. Furthermore, when rigid stability is attainable and desirable, other internal ﬁxation options should be considered. Speciﬁc contraindications to the use of a hinged traction system include a relative contraindication to its use in fractures and fracture-dislocations involving the distal aspect of the proximal phalanx. This is because most of the hinged traction processes use pins as a point of reference or ﬁxation within the head of the proximal phalanx. However, if there is a fracture or fracture-dislocation of the PIPJ that includes the head of the proximal phalanx and other treatment options are not viable, dynamic traction may be used so long as any references pins will not disrupt bony stability and the external ﬁxation apparatus will still span the entirety of the fracture. However, this is a truly rare situation and such injuries are usually better treated with percutaneous pins or static external ﬁxation for a short period if the articular surface is felt to be salvageable, versus joint arthroplasty or arthrodesis if the cartilage component is irrevocably damaged. Other contraindications to the use of hinged dynamic traction include those common to other ﬁxation options, such as infection, complex soft tissue defects, and severe bone loss. Segmental injuries to the bony architecture of the digit usually preclude the use of a PIPJ speciﬁc ﬁxator. Also, prudence must be exercised when a multisystem injury to the digit has been incurred, such as with concomitant tendon, nerve, or vessel

64 & Means et al.

FIGURE 1 Biomet BioSymMetRic PIP Fixator set. Source: Photos courtesy of Kenneth R. Means, Jr.

damages requiring repairs which may be jeopardized by the placement of multiple pins for external ﬁxation.

& CONSIDERATIONS FOR PREOPERATIVE PLANNING Preoperative physical examination of complex PIPJ fracture dislocations begins with standard inspection of the skin and soft tissue and by taking note of any gross deformity. Neurovascular status must also be determined preoperatively, both to prepare for operative interventions as necessary as well as to establish ﬁrm medicolegal documentation. Tenderness to palpation is usually easily localized to the PIPJ but there may be some difﬁculty in determining whether the primary injury is located within the proximal, distal, volar, or dorsal aspect of the PIPJ. Range of motion may be assessed although this is usually difﬁcult and impractical given the patient’s swelling and pain during the acute phase of the injury. Assessment with adequate anesthesia, especially at the time of deﬁnitive treatment, is likely to yield more useful information and will also provide invaluable clues as to the stability of the PIPJ throughout its range of motion. Speciﬁc physical examination factors are relevant to the technique of hinged dynamic ﬁxation. Signiﬁcant soft tissue wounds may prevent use of external ﬁxation, if pins cannot be safely placed outside of the zone of injury. Also, segmental digit injuries, such as associated distal interphalangeal joint (DIPJ) or metacarpal–phalangeal joint (MCPJ) pathology or phalangeal shaft fractures in the same digit, will likely prohibit use of these ﬁxator systems. Preoperative plain ﬁlm radiography is usually the only “advanced” imaging or investigational modality necessary for these cases. However, particular radiographic considerations are pertinent to operative preparations. Evaluation must include anteroposterior, lateral, and oblique ﬁlms of the PIPJ as well as images of the DIPJ and MCPJ at a minimum. Fluoroscopy at the time of deﬁnitive treatment can be very useful. It may be used to determine the point at which the PIPJ becomes stable and unstable at different degrees of ﬂexion and extension, depending on the injury pattern. Also, close-up images can further delineate the degree of articular involvement. Traction ﬁlms taken with the ﬂuoro unit can give more information as to the personality of the injury and will often make the best surgical treatment options more apparent.

& SURGICAL TECHNIQUES The customary operating room setup for hand surgery cases is used. Anesthesia choices are at the discretion of the

anesthesiologist, patient, and surgeon. The patient is supine, with the operative extremity on a hand table. We typically use a well-padded upper arm tourniquet, but a forearm or even a Penrose tourniquet at the base of the digit may be employed if desired. Mini C-arm ﬂuoroscopy and all required implants should be available prior to bringing the patient to the room. The surgeon will have chosen what type of ﬁxation he or she wishes to utilize for the treatment of the PIPJ. Of course, this may change if ﬂuoroscopic images in the operating room so dictate or if other factors not evident earlier become apparent. There are some general principles that may guide the decision as to what speciﬁc type of hinged dynamic ﬁxator should be used. For example, unilateral ﬁxation systems will obviously offer less stability than multiplanar modalities. An exhaustive recount of the technical steps of the multiple surgical options available for hinged ﬁxation dynamic traction is beyond the scope of this text. Instead, we will review a representative example of each of the two major classes of hinged dynamic ﬁxation, namely those commercially obtainable and those made from materials that are readily on hand in the operating room. The commercial PIP ﬁxator we are most familiar with is the BioSymMetRic PIP Fixator, developed by the senior author (TJG) in association with Biomet (Warsaw, Indiana, U.S.A.). It is a bilateral frame that may be used in easily interchangeable static and dynamic modes, has a distraction option, and is biomechanically strong for stabilizing particularly challenging PIPJ fracture-dislocations. It also has a radiolucent frame, which allows complete visualization of the PIPJ during ﬂuoroscopic or plain radiographic lateral and anteroposterior images (Fig. 2). We will then describe a simple bent wire ﬁxator that does not require rubber bands, PMMA rods, or other materials and may be applied with ease and alacrity. It is similar to other models described in the literature (9,11,12). It is a construct that will not provide a large, reliable degree of distraction across the PIPJ and should be used as a stabilizing, force neutralization device only. Of course, this is likely the case for most if not all of the “homemade” bent wiretype mechanisms.

& Application of the BioSymMetRic PIP Fixator

Step 1: Placement of the Axis of Rotation Pin

The PIP axis of rotation is located within the head of the proximal phalanx (7). All hinged dynamic traction devices for the PIPJ are built around this center of rotation. This centerpoint is equidistant from the distal, palmar, and dorsal surfaces of the head of the proximal phalanx. A true lateral of the

Hinged Fixation and Dynamic Traction of PIP Fracture Dislocations & 65 (A)

(B)

FIGURE 2 (A) Fluoroscopic lateral image of the Biomet BioSymMetRic Fixator demonstrating its radiolucent properties. (B) Anteroposterior ﬂuoroscopic image of Biomet BioSymMetRic Fixator. Source: Photos courtesy of Kenneth R. Means, Jr.

proximal phalanx head with complete overlap of the condyles (no “double-shadow”) must be attained in order to properly place this pin along the axis of rotation. Once this axis is found one of the external ﬁxator pins may be placed using a “perfect circle” technique. First, the tip of the pin is placed on the skin and a ﬂuoro perfect lateral image of the proximal phalanx head is taken. The tip of the pin is adjusted on the skin until the tip is over the exact center of the proximal phalanx (P1) head. Once this is conﬁrmed, the pin is aligned with the axis of the ﬂuoro beam and is driven into the head of P1 with a K-wire driver and through the skin on the other side of the digit. The starting point on the skin can also be very closely approximated by using speciﬁc skin markings. Namely, if the PIPJ is maximally ﬂexed, a point midway between a line along the PIPJ digital ﬂexion crease and the dorsal PIPJ skin marks the axis of rotation (Fig. 3). The ﬂuoroscopic steps described above can then be used to conﬁrm this. Once the pin is placed, it should appear as

a single dot on a perfect lateral image of the proximal phalanx (Fig. 4).

Step 2: Placement of the Distal Pins in the Middle Phalanx

The ﬁxator frame is checked to ensure that it is set up so that distraction may be used once applied, if desired. The distal pin in the middle phalanx is placed ﬁrst, under ﬂuoroscopic guidance. This pin is placed transversely in the distal third of the shaft of the middle phalanx along the midaxial line of the bone and through the skin on the other side of the digit. It is placed such that it is parallel to the exact transverse axis of the middle phalanx. The PIPJ is then reduced as necessary and the second, more proximal pin is placed in the middle phalanx. The frame may be used as a guide to place this second pin so that one is assured that the frame will easily be afﬁxed to the two pins in the middle phalanx.

66 & Means et al. (A)

FIGURE 4 The pin should appear as a single dot on a perfect lateral view of the P1 head. Source: Photos courtesy of Kenneth R. Means, Jr.

(B)

Step 5: Static Mode vs. Dynamic Mode

The frame may be easily converted to a static external ﬁxator by placement of a second pin in the proximal phalanx, which will prevent rotation about the central axis of the head of the proximal phalanx. The pin is placed through the guide hole in the frame in the proximal phalanx, proximal to the central head pin. The pin is cut ﬂush with the frame and a cap applied. This pin may later be removed to return the frame to dynamic mode. This is carried out by loosening the dorsal distraction track screws so that the frame may be collapsed centrally, decreasing the width of the frame while still maintaining longitudinal traction (Fig. 6). This then allows access to the proximal most pin of the proximal phalanx. One side of the pin is cut ﬂush with the skin, prepared with betadine, and the other, uncut end of the pin is grasped with a needle holder or pliers and removed. The frame width is restored and the dorsal screws tightened.

& Application of Bent Wire Fixator FIGURE 3 (A) Localizing the proximal interphalangeal joint axis of rotation in the P1 head based on the topographic anatomy. (B) Fluoroscopic “perfect circle” technique. Source: Photos courtesy of Kenneth R. Means, Jr.

Step 3: Application of the Frame

The locking portions of the frame are loosened for ease of application and adjustment. The frame is applied to the protruding ﬁxator pins on the radial and ulnar sides of the digit. Once the frame is positioned as preferred to the optimal width and so there is adequate skin clearance, the Allen wrench is used to tighten the locking screws. The pins may now be cut ﬂush with the frame and caps placed over the cut ends (Fig. 5A,B).

Step 4: Applying Distraction

The distal aspect of the frame houses the screw mechanism for distraction. The radial and ulnar sides may be distracted the same amount or differentially as needed to attain the desired PIPJ reduction and alignment.

Step 1: Placement of the Axis of Rotation Pin

A 0.045-inch smooth K-wire is placed in the head of the proximal phalanx along the central point of rotation of the PIPJ as described above in “Step 1” of the application of the Biomet Fixator (7).

Step 2: Placement of the Middle Phalanx Pin

A second 0.045-inch smooth K-wire is placed in the middle phalanx in its distal third or as needed to span the bony injury. This pin is parallel to the transverse axis of the middle phalanx and along the midaxial line of the bone, through the skin on the other side of the digit (Fig. 7).

Step 3: Bending the Pins

The proximal phalanx axis of rotation pin is bent 908 on each side of the digit, such that the tips of the pin extend distal to the ﬁngertip (Fig. 8). These tips are bent into an “S” shape at about the level of the DIPJ (Fig. 9). Lastly, the middle phalanx pin is bent into a “U” design on each side of the ﬁnger. This is done such that the curved portion of the “U” is distal and is in-line with the vertical area of the “S” portion of the proximal phalanx wire.

Hinged Fixation and Dynamic Traction of PIP Fracture Dislocations & 67 (A)

(B)

FIGURE 5 (A) Posteroanterior clinical view of the Biomet BioSymMetRic Fixator. (B) Lateral view of Biomet BioSymMetRic Fixator. Source: Photos courtesy of Kenneth R. Means, Jr.

Step 4: Linking the Bent Wires and Final Adjustments

Now, the “S” and “U” forms may be linked by sliding the “U” around the “S” and engaging into the dorsal portion of the “S” (Fig. 10A–C). The PIPJ reduction can be checked under ﬂuoroscopy and the joint brought through a range of motion to ensure stability. If the joint is still unstable in certain directions, a third pin may be used to further stabilize the reduction. If the middle phalanx base is dislocating or tending toward subluxation dorsally, the joint is reduced and another transverse pin is

placed in the proximal aspect of the middle phalanx, volar to the longitudinal “S” pin of the proximal phalanx. This will help prevent the middle phalanx from traveling dorsally. Alternatively, if the PIPJ has the middle phalanx still being unstable in a volar direction, the joint may be reduced and a transverse K-wire placed in the proximal portion of the middle phalanx dorsal to the longitudinal “S” proximal phalanx wire. This will hold the middle phalanx reduction, helping avoid volar subluxation of its base.

FIGURE 6 Frame collapsed centrally to allow conversion to dynamic mode by removal of the proximal “staticlocking” ﬁxator pin. Source: Photos courtesy of Kenneth R. Means, Jr.

68 & Means et al.

FIGURE 8 The proximal pin is bent 908 on both sides toward the ﬁngertip. Source: Photos courtesy of Kenneth R. Means, Jr.

FIGURE 7 Proximal and distal pin placement for a bent wire ﬁxator. Source: Photos courtesy of Kenneth R. Means, Jr.

Postoperative management is similar for both of the traction ﬁxation techniques. Nonadhesive dressings are placed at the pin–skin junctions and gauze wrap or other dry dressing may be applied around or over the frame if preferred. No other splints are necessary. Radiographs are checked at standard intervals for the PIPJ injury. We typically allow range of motion, if indicated, once postoperative swelling has started to decline. This is usually permissible any time after a few days following surgery. One key concern is to not neglect the other joints of the injured ﬁnger or the other digits of the hand. If allowed, range of motion of the surrounding joints and digits should begin as soon as possible after the surgical intervention. This has been especially true of the DIPJ in our experience, speciﬁcally with regard to terminal extension. The ability to terminally extend the DIPJ should be checked frequently and should be actively encouraged. If needed, night splinting in extension may be used. The frame is removed when no longer needed. This is typically around four to ﬁve weeks postoperatively. Therapeutic range of motion continues following removal of the ﬁxator and is typically allowed to be more aggressive at that point.

& COMPLICATIONS Complications encountered with hinged ﬁxation dynamic traction consist of those that may be expected in a certain

percentage of any operative procedure. These include but are not limited to bleeding, infection, damage to structures, failure of surgery, possible need for more surgery, and untoward effects of anesthesia. Pin tract infections may be treated with standard methods. However, the surgeon must have a lower threshold for removing the ﬁxator early if necessary given possible concerns for the development of septic arthritis or osteomyelitis, especially due to the pin within the head of the proximal phalanx. The patient must also be counseled regarding realistic expectations following these seemingly innocuous injuries that belie their truly difﬁcult nature. Namely, post-injury pain, loss of motion, loss of function, and degenerative change relative to their pre-injury state is nearly guaranteed to a certain degree. The patient must understand that it is the uncertainty of the degree of these limitations that makes predicting ﬁnal outcome impossible. Speciﬁc concerns related to these dynamic traction methods include possible loss of reduction with continued instability, failure of the hardware, and nonunion. Clearly, these problems are somewhat interrelated. The simplest way to avoid this cascade of surgical dilemmas is to ensure that the frame is stable at the time of initial surgery as well as at follow-up visits. Also, using the frame as indicated and not purposefully overextending its capabilities is important. For example, a grossly unstable PIPJ with tenuous ﬁxation or other complexities is likely not appropriate for immediate active range of motion. Improperly using the dynamic mode of the ﬁxator too early will inevitably lead to a loss of PIPJ congruity and eventual failure of the construct. Similarly, a dorsal fracture at the base of the middle phalanx where the central slip inserts should be immobilized in extension with the static mode for three weeks to allow some bony healing to occur and prevent late formation of a boutonnie`re deformity. Even with these considerations the primary concern following these injuries remains stiffness rather than instability. However, lack of early joint stability combined with

Hinged Fixation and Dynamic Traction of PIP Fracture Dislocations & 69

FIGURE 9 The proximal pin is bent on both sides into an “S” conﬁguration. Source: Photos courtesy of Kenneth R. Means, Jr.

aggressive range of motion may lead to a damaging cycle of pain and swelling followed by stiffness if therapeutic motion is attempted in an unstable joint situation.

& OUTCOMES Our results using the bilateral external ﬁxator for the most difﬁcult cases have been promising. In over 50 cases that have been followed, we have achieved a minimum of 758 of motion at the PIPJ. In over half of the cases more than 908 of motion at the PIPJ was attained. A terminal extension lag of ﬁve8 or more at the PIP and distal interphalangeal (DIP) joints has been seen in over 40% of patients treated. Pin tract infections requiring oral antibiotics have occurred in approximately 20% while early pin removal has been deemed necessary secondary to infection in approximately 5%. There have been no cases of septic arthritis, and no infections requiring a return to the operating room have been encountered. We have not had any hardware failures in this series. It must be remembered that this ﬁxator is typically used in the most challenging of injuries, where optimal control of the PIPJ is required while attempting to minimize aggressive open dissections of the joint, usually because of the signiﬁcant associated comminution and soft tissue concerns. Reviews of reports of dynamic traction options are predictably variable given the plethora of design options and PIPJ damage spectrum, to make no mention of the different study methods employed. Badia et al. described their retrospective results in six patients using a wire-form ﬁxator modiﬁcation of Gaul and Rosenberg’s system (13). They achieved an average of 898 of ﬂexion of the PIPJ and one patient had “mild pain with extreme ﬂexion.” This system is similar to the bent wire ﬁxator described in this chapter. Syed et al. similarly described a modiﬁcation of Gaul and Rosenberg’s ﬁxator (14). Theirs was a prospective study of nine fractures involving the PIPJ. Average arc of motion was 798 and all patients were pain free during activities of daily living and returned to prior employment positions. They experienced two episodes of uncoupling of their dynamic traction mechanism, one of which was easily corrected and the other which presented in a signiﬁcantly delayed fashion resulting in the decision to simply remove the ﬁxator. Duteille et al. used Suzuki’s “pins

and rubbers” traction system, which consists of K-wires and rubber bands, to treat 20 patients with PIPJ fractures and fracture-dislocations (3). One patient was unable to tolerate the device and one patient had a pin track infection while two other patients were lost to follow-up. The remaining 16 patients demonstrated an average of 85.98 of motion with only one patient having intermittent pain. Their post-op regimen included intense therapy including hospitalization for three weeks. They noted that only 56% of the joints achieved anatomic restoration despite good functional results. De Smet and Boone achieved similar results with the Suzuki technique. They treated eight patients and attained an average of 828 of PIPJ total active motion, though they had a wide range for total active motion (42–1258) (15). Deshmukh et al. modiﬁed Suzuki’s system for 13 PIPJ injuries (16). They obtained an average active ROM of 858 for the PIPJ (range 60– 1058). Sarris et al. reviewed results in four PIPJ injuries treated with limited open reduction, minimal internal ﬁxation, and Schenk’s dynamic traction splint (17). Average PIPJ motion arc was 948 and all patients returned to previous occupational activities. There are also nonhinged traction devices available for the treatment of the PIPJ. Khan and Fahmy retrospectively reviewed 81 fractures of the PIPJ treated with the S-Quattro external ﬁxator designed by their senior author, which uses a dual spring column system to achieve traction ﬁxation with limited ability to move the joint that is spanned (18). They obtained an average arc of 928 of motion (range 60–1208) of the PIPJ and a satisfaction rate of over 95%. Johnson et al. revealed their results with another spring/coil ﬁxator mechanism in 11 patients that had spanning of the PIPJ, though in only eight cases was the primary injury at the PIPJ (19). Their average PIPJ range of motion was from 78 to 848. These results realistically cannot be compared with results for closed reduction and splinting, open reduction internal ﬁxation (ORIF), or closed reduction internal ﬁxation (CRIF) of the PIPJ. This is because most PIPJ injuries amenable to closed reduction and splinting, ORIF, or CRIF have larger fragments that are stable once reduced or that may be treated with simple interfragmentary screws or pins. These are much lower energy injuries in general and should be considered as separate entities for the purposes of predicting outcomes.

70 & Means et al. (A)

(B)

(C)

FIGURE 10 (A) Close-up view of one side of the bent wire ﬁxator showing the distal pin bent into a distally based “U” conﬁguration and engaged with the “S” bend of the proximal pin. (B) Engaged pin arrangement from the lateral view. (C) Oblique view. Source: Photos courtesy of Kenneth R. Means, Jr.

& SUMMARY

& SUMMATION POINTS

Hinged ﬁxation with dynamic traction may be a useful adjunct to the overall treatment of complex PIPJ injuries. Following guidelines for indications and technique as described above should allow surgeons to attain the desired beneﬁts of the ﬁxators.

Indications

Complex injuries of the PIPJ, especially those involving primarily the base of the middle phalanx, also in “pilon” fractures or fracture-dislocations.

Hinged Fixation and Dynamic Traction of PIP Fracture Dislocations & 71

Outcomes

With the proper indications and technique for a salvageable joint, one may expect reasonably good functional outcomes including 758 or more of PIPJ motion, relative comfort during daily activities, and the ability to return to vocational and avocational endeavors.

Complications

Typically those inherent to the severe damage sustained by the PIPJ such as stiffness and degenerative changes; pin tract and other ﬁxator issues are dealt with in a routine manner. Resubluxation and septic arthritis are complications that are especially unique to hinged ﬁxation and must be watched for diligently.

& REFERENCES 1. Blazar PE, Steinberg DR. Fractures of the proximal interphalangeal joint. J Am Acad Orthop Surg 2000; 8(6):383–90. 2. Aladin A, Davis TR. Dorsal fracture-dislocation of the proximal interphalangeal joint: a comparative study of percutaneous Kirschner wire ﬁxation versus open reduction and internal ﬁxation. J Hand Surg [Br] 2005; 30(2):120–8. 3. Duteille F, Pasquier P, Lim A, Dautel G. Treatment of complex interphalangeal joint fractures with dynamic external traction: a series of 20 cases. Plast Reconstr Surg 2003; 111:1623–9. 4. Schenck RR. Dynamic traction and early passive movement for fractures of the proximal interphalangeal joint. J Hand Surg [Am] 1986; 11:850–8. 5. Agee JM. Unstable fracture dislocations of the proximal interphalangeal joint: treatment with the force couple splint. Clin Orthop 1987; 214:101–12. 6. Inanami H, Ninomiya S, Okutsu I, Tarui T, Fujiwara N. Dynamic external ﬁnger ﬁxator for fracture dislocation of the proximal interphalangeal joint. J Hand Surg [Am] 1993; 18:160–4. 7. Suzuki Y, Matsunaga T, Sato S, Yokoi T. The pins and rubbers traction system for treatment of comminuted intraarticular fractures and fracture-dislocation in the hand. J Hand Surg [Br] 1994; 19B:98–107.

8. 9.

10. 11.

12. 13.

14. 15. 16.

17. 18. 19.

Slade JF, III, Baxamusa TH, Wolfe SW. External ﬁxation of proximal interphalangeal joint fracture-dislocations. Atlas Hand Clin 2000; 5(1):1–29. Elkowitz SJ, Graham TJ. Dynamic external ﬁxation for treatment of fracture-dislocations of the proximal interphalangeal joint. In: Strickland JW, Graham TJ, eds. Master Techniques in Orthopedic Surgery: The Hand, 2nd ed. Vol. 7. Philadelphia: Lippincott Williams & Wilkins, Inc., 2005:95–108. Bain GI, Mehta JA, Heptinstall RJ, Bria M. Dynamic external ﬁxation for injuries of the proximal interphalangeal joint. J Bone Joint Surg [Br] 1998; 80B:1014–9. Gaul JS, Jr., Rosenberg SN. Fracture-dislocation of the middle phalanx at the proximal interphalangeal joint: repair with a simple intradigital traction-ﬁxation device. Am J Orthop 1998; 27:682–8. Hynes MC, Giddins GEB. Dynamic external ﬁxation for pilon fractures of the interphalangeal joints. J Hand Surg [Br] 2001; 26B(2):122–4. Badia A, Riano F, Ravikoff J, Khouri R, Gonzalez-Hernandez E, Orbay JL. Dynamic intradigital external ﬁxation for proximal interphalangeal joint fracture dislocations. J Hand Surg [Am] 2005; 30A(1):154–60. Syed AA, Agarwal M, Boone R. Dynamic external ﬁxator for pilon fractures of the proximal interphalangeal joints: a simple ﬁxator for a complex fracture. J Hand Surg [Br] 2003; 285(2):137–41. De Smet L, Boone P. Treatment of fracture-dislocation of the proximal interphalangeal joint using the Suzuki external ﬁxator. J Orthop Trauma 2002; 16(9):668–71. Deshmukh SC, Kumar D, Mathur K, Thomas B. Complex fracturedislocation of the proximal interphalangeal joint of the hand: results of a modiﬁed pins and rubbers traction system. J Bone Joint Surg [Br] 2004; 86B:406–12. Sarris I, Goitz RJ, Sotereanos DG. Dynamic traction and minimal internal ﬁxation for thumb and digital pilon fractures. J Hand Surg 2004; 29A(1):39–43. Khan W, Fahmy N. The S-Quattro in the management of acute intraarticular phalangeal fractures of the hand. J Hand Surg [Br] 2006; 31B(1):79–92. Johnson F, Tiernan E, Richards AM, Cole RP. Dynamic external ﬁxation for complex intraarticular phalangeal fractures. J Hand Surg [Br] 2004; 29B(1):76–81.

10 External Fixation of the Metacarpals and Phalanges and Distraction Osteogenesis Bruce A. Monaghan

Orthopedics at Woodbury, Woodbury, New Jersey, U.S.A.

& INTRODUCTION External ﬁxation is a minimally invasive technique by which transﬁxing pins inserted into the bone are attached to a rigid external frame as a method of stabilization of fractures and joints. Reduction of fractures is accomplished by indirect means (closed reduction) and maintained by distraction and ligamentotaxis. Since the ﬁrst description of an external clawtype device for the treatment of a patella fracture by Malgaigne in 1853, external ﬁxation has evolved to be an accepted and versatile treatment option for open long bone fractures and periarticular fractures of the lower extremity. In the upper extremity, external ﬁxators are used for bony injuries proximal to the carpus (1). Signiﬁcant technical advancements were made to external ﬁxation systems in the 1960s that permitted correction of deformities in three planes. While this allowed for placement of transﬁxing pins prior to fracture reduction and for adjustments after initial applications, these systems were too large for practical use in the metacarpals and phalanges. Initial reports of external ﬁxation of the metacarpals and phalanges utilized smooth Kirschner (K) wires stabilized by acrylic resin (2,3). Crockett described this technique for stabilization of a ﬁrst metacarpal osteotomy and a small joint arthrodesis, while Dickson employed the external ﬁxation for unstable closed metacarpal fractures. Shehadi reported the use of this technique in 30 closed fractures (4). Pritsch et al. treated 36 unstable metacarpal fractures in this fashion (5). A modiﬁcation of this technique whereby a plastic cap of a hypodermic needle or a suction catheter is substituted for the acrylic as the rigid external frame has also been described (6,7). Both techniques involve readily available materials and the authors comment on the ease of assembling the construct. This early experience, however, required achieving and maintaining a reduction while the frame was assembled; remanipulation of the construct could not easily be accomplished. Jacquet is credited with developing the ﬁrst external mini-ﬁxator system for use in the hand in 1976 by modifying the Hoffman ﬁxator (8). Asche et al. reported their experience with the Jacquet mini-ﬁxator and noted the versatility of the system and its capability for distraction and compression. Several miniaturized external ﬁxators have subsequently been developed (9–13). These systems now appear to offer the versatility of skeletal ﬁxation achieved by the larger predecessors, including stable uniplanar or multiplanar constructs, simultaneous correction of deformities in all three planes, modularity, and the ability for dynamization to achieve compression or distraction (Fig. 1). They confer sufﬁcient stability to obviate the need for supplementary postoperative splinting and allow rapid mobilization of

neighboring joints and digits. In treating fractures, external ﬁxators have the extra beneﬁt of preserving the soft-tissue sleeve and periosteum, which are important in fracture healing. Additionally, the ﬁxator can often times obviate the need for internal ﬁxation, thereby eliminating complications from internal hardware, such as tendon irritation, adhesions, and hardware prominence. Matev was the ﬁrst to describe the use of an external ﬁxator for skeletal lengthening in hand by a process known as distraction osteogenesis (14–16). This technique allows for gradual lengthening of a metacarpal or phalanx which has been stabilized at an osteotomy site by an external ﬁxator. In many instances, gradual lengthening is preferred over a single acute lengthening because it allows the soft tissues (including nerves) to slowly accommodate to the stretching and minimize any possibility of acute neurovascular compromise. When the desired length has been achieved (up to 4 cm), the external ﬁxator then provides stability until bony union occurs. Although the initial application was for posttraumatic amputations of the ﬁrst ray, distraction osteogenesis can also be employed in the medial four digits for reconstruction of posttraumatic and congenital conditions in children and adults (17–25).

& INDICATIONS Operative indications for use of external ﬁxation in the hand vary with authors, but can be employed in a myriad of clinical situations.

& Open Fracture Although open fractures are common in the metacarpals and phalanges, traditional methods of percutaneous Kirschner wire (K-wire) ﬁxation and open reduction internal ﬁxation have been preferred (26). External ﬁxation should be considered in open hand fractures with extensive comminution, segmental injuries with bone or soft tissue loss, and signiﬁcantly contaminated wounds (Fig. 2) (27–32). Some believe that all gunshot wounds to the hand should be considered open and potentially infected and are amenable for treatment by external ﬁxator (32,33). The ability to obtain stabilization of severely comminuted open fractures with an approach that minimizes the risk of devascularization of small bony fragments while placing the construct far from the zone of injury can facilitate wound management.

74 & Monaghan (A)

FIGURE 1 An example of a miniaturized modular external ﬁxator system that permits construction of a wide variety of uniplanar and multiplanar frames (Hoffmann II Micro from Stryker Orthopaedics, Mahwah, NJ, USA).

& Closed Fracture Extensively comminuted closed fractures of the phalanges and metacarpals may defy even the most meticulous surgeon’s ability to achieve alignment and rigidity by open or closed means. For extra-articular fractures, the distraction afforded by external ﬁxation can correct translational, rotational, and angular deformity with minimal impact on the biology of the healing fracture. With intra-articular fractures or fracture dislocations, comminution and small fragment size often preclude open operative stabilization (26). Indirect reduction of these injuries by the principle of ligamentotaxis can provide reasonable joint congruency. Limited open reduction of articular fragments when they are large enough to make interfragmentary ﬁxation feasible can also be combined with an external ﬁxator (34). There are several reports of these techniques for comminuted fracture dislocations of the thumb metacarpal base (34–36). Repeated surgery after a failed attempt at fracture ﬁxation is also an indication for use of an external ﬁxator as it can bypass some of the mechanical (comminution) and biological (infection) factors that may have led to recurrent fracture instability (26).

(B)

& Malunion When combined with a corrective osteotomy, an external ﬁxator can facilitate achieving alignment and maintaining skeletal stability (2,37).

& Osteomyelitis, Delayed Union, and Established Nonunion Bone infections present one of the most difﬁcult treatment dilemmas in orthopedics and hand surgery. Infections can frequently coexist and be the underlying cause of delayed union and nonunions of the hand. External ﬁxation allows maintenance of length and alignment of the bone–soft tissue unit after debridement so that subsequent bone grafting and even soft tissue coverage, when necessary, can be more readily accomplished (38). Depending on the status of the wound, bone grafting can be accomplished as a delayed primary or secondary procedure (29). In addition, this stability can be conferred from a site distant from the actual infection.

& Arthrodesis Seitz et al. adapted the Charnley’s technique of compression arthrodesis and careful cup and cone preparation of the joint surface to achieve a stable arthrodesis in 95% of their

FIGURE 2 Extensively comminuted open multiple metacarpal fractures treated by debridement, application of a multiplanar external ﬁxator which spanned the metacarpals by pins into the proximal phalanx, and carpus supplemental K-wire ﬁxation was also utilized. (A) Preoperative X ray and (B) postoperative clinical appearance. Abbreviation: K-wire, Kirschner wire. Source: Courtesy of David J. Bozentka, M.D.

External Fixation of the Metacarpals and Phalanges and Distraction Osteogenesis & 75

closed fractures. Nagy believes that preservation of the integrity of a gliding surface, which is tantamount to good hand function, is better achieved with external ﬁxation than percutaneous and open methods (26). To that end, there are no absolute contraindications to this method of bony ﬁxation of the hand. The decision of whether to pursue an open or minimally invasive method of bony stabilization should be predicated upon the extent of soft tissue injury and contamination, the fracture pattern and the likelihood of achieving sufﬁcient bony stability for early motion by each treatment option, and the experience of the individual surgeon with each technique. Perhaps more than percutaneous and open methods of fracture ﬁxation, external ﬁxation requires signiﬁcant patient compliance postoperative pin care and cooperation with a directed rehabilitation program. A relative contraindication, therefore, would be any behavioral, physical, or neurological impairment that would interfere with the patient’s ability to assist in the postoperative regimen.

& CONSIDERATION FOR PRE-OPERATIVE PLANNING

FIGURE 3 This external ﬁxator is being utilized to stabilize a basilar joint arthroplasty in a 47-year-old female who has failed three other reconstructions of the thumb carpal metacarpal joint. The frame allows for rapid mobilization and proper positioning of the ﬁrst web space.

patients (39). The avoidance of a second anesthetic for hardware removal or tenolysis, the ability to compress and/or adjust the arthrodesis after the initial application, and the functional use of the hand and adjacent joints during healing are distinct advantages of this technique over open procedures with hardware placement.

& Joint and Soft Tissue Stabilization External ﬁxation has been described as an adjunct for extensor tendon reconstruction and to stabilize the digits to prevent tension on a cross-ﬁnger ﬂap (26). It can also be used for joint stabilization in selected settings, particularly in the ﬁrst ray and web space (Fig. 3).

& Distraction Osteogenesis This is the preferred reconstructive option for amputation of the ﬁrst ray around the level of the metacarpophalangeal (MP) joint (e.g., the proximal half of the middle third of the thumb).

Preoperative planning for acute injuries should include a directed examination of the neurovascular status and concomitant injuries to other digits and more proximally in the extremity that might alter surgical management. In general, standard anteroposterior, lateral, and any pertinent specialized plain radiographs (hyperpronated, Brewerton, or Bora view) should be obtained to fully assess the extent and pattern of bony injury. Occasionally, additional imaging of the joint surface by computed tomography scanning or tomography may add useful information for articular reconstruction. Scintigraphic (i.e., Ceretec scanning) or magnetic resonance imaging should be reserved to situations where localizing an area of infection may guide the extent of bony and soft tissue debridement.

& SURGICAL TECHNIQUE & Operating Room Setup and Equipment Application of an external ﬁxation to a metacarpal or phalanx is best accomplished under regional or general anesthetic, with the injured extremity abducted 908 at the shoulder onto a radiolucent hand table. Real-time ﬂuoroscopy is employed to accurately assess pin placement and bony reduction. A simple external ﬁxator can be fashioned from material readily available in any operating room (K-wires, needle caps, bone cement, and suction catheter). Standard miniature external ﬁxator systems, however, offer more stable and versatile constructs for any situation that may be encountered in the hand (Fig. 1). In planning the construction of an external ﬁxator in the metacarpal or phalanx, it is important to consider radiographic assessment of the outcome even before the placement of the ﬁrst pin. The diminutive size of the bone relative to the components of even the most miniaturized external ﬁxator can obscure one’s ability to evaluate bony reduction radiographically. Every component, therefore, should be assembled with maximum care being taken to allow clear visualization by ﬂuoroscopy.

& CONTRAINDICATIONS

& Operative Approach—Fractures

External ﬁxation is a versatile method of skeletal ﬁxation that should be a part of each hand surgeon’s armamentarium. Several authors even report routine use of this device for

The complex gliding relationship between the bone and the extensor apparatus must be understood and respected to minimize the likelihood of soft tissue tethering. Behrens has

76 & Monaghan (A)

(B)

FIGURE 4 Appropriate placement of pins and soft tissue release is essential to prevent limitations of (A) extension and (B) ﬂexion.

divided limb segments into longitudinal regions or corridors based upon the soft tissue elements present (40). In a safe corridor, the bone is subcutaneous and no neurovascular or musculotendinous structures are at risk with pin placement. A hazardous corridor is one in which a musculotendinous structure is at risk. A neurovascular structure is at risk in an unsafe corridor. Since at the level of the metacarpals and phalanges almost the entire circumference of the bone is surrounded by tendinous and neurovascular elements, no safe corridor for pin placement exists. The appropriate hazardous corridor, therefore, should be selected with forethought for the structure at risk and a plan to minimize the potential tethering effect of the pin (Fig. 4). The ﬁrst, second, and ﬁfth metacarpal can be approached through a midlateral or dorsolateral incision (26,32). Pins in the thumb metacarpal can be placed just radial to the extensor pollicis brevis tendon. For metacarpal neck fractures, the distal pins can be placed within the collateral recess, but through a limited open incision to assure that the sagittal ﬁbers about the MP joint are not tethered. The third and fourth metacarpals require pin placement in a dorsolateral plane to prevent extensor tendon tethering. A percutaneous insertion of the pin or drill with a gentle sweep to displace the tendon out of harm’s way prior to predrilling may also prevent extensor mechanism binding (Fig. 5A,B).

The proximal aspect of the proximal phalanx is best approached through a dorsolateral limited approach as well (41). A short incision in the extensor hood at this level is well tolerated and its ﬁbers allow for a clean longitudinal split that does not inhibit digital motion. In the distal aspect of the proximal phalanx and the middle phalanx avoidance of lateral band impingement can be accomplished by a straight midlateral approach to pin placement. Straight dorsal placement in the middle phalanx and the distal phalanx, with care be taken to avoid the germinal matrix, is also an acceptable, although a rarely employed, pin location (26). In assembling an external ﬁxator, it is important to consider that each component (bone, transﬁxing pin, pin clamp, pinto-rod clamp, and connecting rod) contributes incrementally to the ultimate strength of the construct. Nevertheless, it is generally understood that pin characteristics and placement represent the single most important determinant to the ultimate stiffness of the construct (42,43). Ideally, pins of at least 1.5 to 2.0 mm in diameter should be used, although some authors feel smaller pins allow for capturing of smaller bony fragments. Low-speed predrilling with insertion of the pins by hand will limit thermal damage to the bone and early pin loosening. Increasing the number of pins in each bony segment, increasing the inter-pin distance, placement of the connecting rod closer to the bone, and placement of a second connecting rod will improve the ultimate stability of the frame. In general, a unilateral frame with four half-pins will provide sufﬁcient ﬁxation for most injuries. After initial bicortical pin placement in each bony segment, a second parallel pin can be placed by using the multipin clamp as a drill guide (Fig. 5C). Most systems allow for slight convergence or divergence of these pins in small bony segments, a distance of 2.5 times the pin diameter must be left between fracture site and pin or between pins to prevent bony fragmentation. A second pair of pins is then placed in the other main bone fragment. The surgical wounds are then closed and the pins of each bony segment are then ﬁrmly tightened into a multipin clamp. A rod-to-rod coupling is placed on each pin clamp and a rod is then placed loosely between each pin clamp (Fig. 5D). At this point, a closed reduction of the metacarpal or phalanx is then performed and alignment is assessed ﬂuoroscopically. If acceptable, the rod is ﬁrmly tightened to each clamp. In some instances, a limited open reduction at the fracture site can be performed to achieve better alignment. Residual articular incongruity can also be corrected with a limited open reduction with bone grafting after ligamentotaxis has been established by the frame. After the external ﬁxator is fully assembled, full passive digital range of motion should be possible to conﬁrm the absence of tendinous tethering and the tenodesis effect should be observed to rule out subtle residual rotational deformities (Fig. 5E). Unrestricted range of motion exercises should be initiated as soon as possible based on the ultimate stability of the bone external ﬁxation construct. Most surgeons begin within three days postoperatively under the guidance of a hand therapist. Weekly follow-up radiographs and clinical assessments conﬁrm maintenance of reduction and healing. The frame can typically be removed in an ofﬁce setting when clinical and radiographic healing has been conﬁrmed.

& Operative Approach—Distraction Osteogenesis Distraction osteogenesis employs a similar surgical technique. The pins are placed and the frame is preassembled on the intact

External Fixation of the Metacarpals and Phalanges and Distraction Osteogenesis & 77

(A)

(B)

(C)

(D)

(E)

FIGURE 5 (A) Placement of a uniplanar external ﬁxator on the proximal phalanx. An incision is made through skin and a longitudinal rent in the extensor mechanism is created to prevent tendinous binding with postoperative motion. (B) Placement of a uniplanar external on the proximal phalanx. After low-speed drilling, a bicortical ﬁxation pin is placed and the position is conﬁrmed ﬂuoroscopically. Alternatively, a self-tapping, self-drilling pin can be utilized. (C) Placement of a uniplanar external on the proximal phalanx. Parallel pin placement using a pin clamp as a guide. (D) Placement of a uniplanar external on the proximal phalanx. In a modular external ﬁxator, the pins in each bony segment are connected to each other by clamps and each of the clamps is connected by a radiolucent rod. (E) Placement of a uniplanar external on the proximal phalanx. Full passive motion after complete assembly of the frame assures the absence of extensor mechanism impingement.

bone with a specialized connecting rod that allows controlled distraction in intervals as small as 0.125 mm (lengthener) according to the principles delineated above (distraction lengthener). The specialized lengthener and clamps are removed and an osteotomy is performed through an open incision, with an attempt made to preserve a periosteal sleeve for closure. If a bony segment on the one side of the proposed osteotomy site is too small to allow for two longitudinal pins perpendicular to the axis of the osteotomy, they can be placed as a transﬁxing pin. Alternatively, a technique where distraction osteogenesis occurs

using a frame with a single pin over a longitudinally placed K-wire has been described (19). After wound closure, the external ﬁxator is reapplied and tightened. Most surgeons commence lengthening between the third and seventh postoperative day (14,17–23). Daily lengthening rate of 0.125 to 1.0 mm/day has been utilized. Once the desired magnitude of lengthening has been attained, the frame is left in place to stabilize the bone until radiographic and clinical union is present (Fig. 6). Typically, this will require twice the time required for lengthening in children and three times that

78 & Monaghan (A)

(B)

FIGURE 6 Radiographic appearance during distraction phase. Clinical example of a lengthening frame for distraction osteogenesis after a thumb blast injury in a child. After desired lengthening has been achieved, the frame provides stability until bony consolidation has been achieved. Source: Courtesy of Pedro K. Beredjiklian, M.D.

(C)

period in adults. For example, if 3 cm of lengthening was achieved in 45 days, the external ﬁxator may be required for an additional 90 to 135 days in order to achieve stable osseous union. Some authors shorten the period of external ﬁxation, by bone grafting and even internal ﬁxation when the desired length has been achieved.

& Illustrative Case Example An 82-year-old housewife sustained an open middle phalanx and distal tuft fractures of her dominant right index ﬁnger and an open bony mallet fracture of her left ring ﬁnger as a result of a dog bite. While the fracture of the index ﬁnger was a minimally comminuted displaced transverse fracture through the base, there was a relatively extensive soft tissue injury. The extensor mechanism was shredded along the radial lateral band, but was functionally intact (Fig. 7A). It was felt that percutaneous ﬁxation and immobilization would lead to signiﬁcant stiffness, and formal open reduction and internal ﬁxation would lead to further injury to the extensor mechanism. The patient underwent application of a biplanar external ﬁxator, closed reduction of the middle phalanx fracture, and wound debridement and closure; the size of the proximal fragment dictated that orthogonal pins be placed for stable ﬁxation (Fig. 7B). She underwent K-wire ﬁxation of the contralateral bony mallet. She was begun on active and active-assisted range of motion on the ﬁrst postoperative day and was able to

FIGURE 7 (A) External ﬁxation of an open middle phalanx fracture as a result of a dog bite. Extensive soft tissue injury with relative sparing of the extensor mechanism. (B) External ﬁxation of an open middle phalanx fracture as a result of a dog bite. Application of multiplanar external ﬁxation. Orthogonal pins were necessary in proximal fragment because of fragment size. (C) External ﬁxation of an open middle phalanx fracture as a result of a dog bite. Range of motion observed after assembly of frame and fracture reduction.

achieve 1008 of proximal interphalangeal joint active motion (Fig. 7C). The external ﬁxator was removed uneventfully after four weeks.

External Fixation of the Metacarpals and Phalanges and Distraction Osteogenesis & 79

& COMPLICATIONS Perceived complications may be the primary reason that external ﬁxation remains a relatively underutilized technique in hand trauma. Margic believes that this technique has not gained popularity for treatment of closed fractures in the hand because of the possibility of infection, pin loosening, loss of reduction, interference with the gliding capabilities of the extensor mechanism, difﬁculty in application, and over exposure to X ray during application (13). It is generally felt that pin loosening is the antecedent to pin site infection more than the converse (43). Meticulous attention to details in pin placement with low-speed drilling, bicortical pin ﬁxation, and a reduction that allows sufﬁcient bony contact to minimize dynamic stresses on the bone–pin interface will help to prevent pin loosening, infection, and loss of reduction. Patient compliance with an appropriate regimen of pin care is also essential. Oral antibiotics should be initiated if pin care does not eradicate pin site drainage or erythema. Occasionally, pin removal and new pin placement may be required. Margic believes that in about half of his patients who developed deep bone infections, technical errors with pin placement were responsible (13). A complication that can occur intra- or perioperatively is a fracture at the half-pin site. This can happen if the half-pin is eccentrically placed, causing a stress riser in the bone. After the external ﬁxator is removed, there is a theoretical risk of fracture through the half-pin hole(s). As with any ﬁxation technique, loss of reduction and malunion can occur (29,33). External ﬁxation, however, is more amenable to correction of this problem, in that the fracture can be easily remanipulated and stability improved by placement of additional pins. Nonunions have been reported with this technique and can be a consequence of the original severity of the injury, as well as be a consequence of the treatment (e.g., over distraction) (28,29,33). An intraoperative assessment of soft tissue tension via the intrinsic tightness test and passive range of motion can give some evidence for over distraction. Careful radiographic interpretation of the ﬁnal alignment can also help to minimize over distraction and possible delayed or nonunion. An overall rate of nonunion of 1.1% for closed fractures and 14% for open fractures has been reported (26). Distraction osteogenesis has risks in addition to all those stated for external ﬁxation. Extended treatment periods (more than six months in some cases) with external ﬁxation can lead to a higher rate on pin tract infection. Rapid bone elongation has also been associated with excessive pain and digital contracture. Bosch et al. recommends pinning of the interphalangeal joint during metacarpal lengthening to minimize the risk of contracture (25). In addition, poor bone formation at the osteotomy site, delayed union, nonunion, premature closure of the osteotomy, and fracture have also been described with distraction osteogenesis (17–19,22,23).

& OUTCOMES & Fractures Asche et al. were the ﬁrst to report their experience with the Jacquet mini-ﬁxator in the English literature in 25 patients in 1979 (8). The system was versatile enough to be used in open fractures, infections, replantation, and arthrodeses. They noted that compression and distraction could be achieved. Pin site infection occurred in only one of the 100 ﬁxation pins that were inserted. Riggs and Cooney utilized the same ﬁxator in 10 hand fractures, three of which were open fractures (28).

Bilos and Eskestrand treated 15 patients with low-velocity gun shot wounds to the proximal phalanx utilizing a mandibular external ﬁxation system with 1.1 or 1.6 mm pins (33). Treatment goals were correction of deformity, avoidance of over distraction, bony healing, and stable ankylosis of the proximal interphalangeal joint when it was involved in the injury. Although 25% of digits required remanipulation of the frame, acceptable alignment with maintenance of MP motion was achieved in 86% of the patients. Freeland utilized an Arbeitsgemeinshaft fu¨r Osteusynthesefr (AO) external ﬁxator for 20 open fractures of the hand in 12 patients (29). Delayed bone grafting and early bone grafting (within one week of injury) were both selectively employed and resulted in an 80% primary union rate. Nevertheless, he did note a 55% rate of joint ankylosis and 10% rate of angulation in this group of severely injured digits. Seitz et al. presented their results of use of an external ﬁxator for 28 hand fractures, of which 18 were open (30). They reported achieving an 85% fracture union rate at eight weeks postinjury and 70% of expected motion, although they also experienced a 23% complication rate; most of these complications were attributed to the severity of injury. Parsons et al. presented their results of the Shearer micro-external ﬁxator in 37 unstable metacarpal and phalangeal fractures in 30 patients; 24% of these injuries were open (44). Four 1.8-mm threaded pins were placed prior to placement of the frame. With immediate postoperative motion initiated, they achieved good or excellent results in 94% of metacarpal injuries and 85% of phalangeal injuries. Delayed union occurred in three cases, pin tract infections occurred in two cases and malunion resulted in two instances. The authors commented that immediate painless and stable ﬁxation provided the perfect circumstance for rapid mobilization of the digits. Ashmead et al. employed external ﬁxation for 27 acute injuries and eight reconstructive cases in the hand (45). Of the 12 open fractures, 10 healed primarily, 20 of 22 acute fractures united, and all arthrodeses proceeded to fusion without complications. This method of treatment was also effective in helping to eradicate three infected nonunions and in obtaining union in two of them. Several authors presented their experiences with an external ﬁxator as a primary treatment for closed metacarpal and phalangeal fractures. Pritsch et al. reported their results of treatment of 36 closed metacarpal fractures using a simple external ﬁxator composed of two 1.5-mm K-wires drilled dorsally through the metacarpal and bonded together by acrylic resin (5). Immediate postoperative motion was encouraged and the ﬁxators were removed after an average of ﬁve weeks. They reported a 100% union rate and 80% range of motion compared with the contralateral unaffected digit. Shehadi also treated 30 closed hand fractures with an external ﬁxator consisting of four K-wires (0.9–1.1 mm in diameter) bonded by polymethylmethacrylate bone cement. Active range of motion exercises were initiated one week postoperatively and about 50% of patients required more than four weeks of formal therapy. He reported an average of 84% of expected range of motion for phalangeal fractures and 96% for metacarpal fractures. Margic recently reported the largest series of external ﬁxation in 100 closed hand injuries (13). His indication for placing this device was failure to achieve stable reduction with more than one K-wire or requiring more than two attempts at closed reduction. These were 40 metacarpal fractures, 40 phalangeal fractures, and 20 combined injuries. The pins employed were 1.2 and 1.4 mm in diameter; in 17% of the cases, an adjunctive open reduction was needed. Active range of motion was encouraged as soon as possible

80 & Monaghan

postoperatively. A good outcome, which was described as greater than 2308 of active digital motion, was achieved in 76% of phalangeal fractures, 89% of combined fractures, and 100% of metacarpal fractures. Seven phalangeal fractures were felt to have poor stability, yet only three of these fractures had a poor outcome. An overall pin site infection rate of 11% was found and 2% ultimately developed osteomyelitis. Pressure necrosis of the skin of adjacent digits due to interference with the apparatus was observed in three cases. There was a 5% refracture rate observed with high-risk activities and/or noncompliance; no delayed unions or nonunions were observed. The author felt his outcomes were comparable to those reported in the literature for percutaneous or open methods of ﬁxation of these fractures. Bu¨chler et al. presented 12 cases of comminuted fractures of the thumb metacarpal base and one trapezial fracture treated with a spanning external ﬁxator, limited internal ﬁxation, and bone grafting (34). In spite of radiographic evidence of joint irregularities in 44% of the cases, about 80% of range of motion and 88% of pinch strength of the contralateral thumb were observed at an average of 37 months postinjury. Soyer reiterated that anatomic restoration of the articular surface is desired, but not essential for a good functional result (46). Kontakis et al. reported excellent results in seven of 11 patients, good results in three patients and a poor result in one patient treated with an external ﬁxator, with two pins in the thumb metacarpal and one pin in the trapezium; a 44% incidence of radiographic osteoarthritis was observed at 30-month follow-up (36). Nonnemacher utilized a quadrilateral frame between the ﬁrst and second metacarpals to stabilize 20 thumb metacarpal base fractures, 60% of which were intra-articular (35). Of those with sufﬁcient follow-up, 77% were pain free and 23% demonstrated only intermittent pain.

presented 12 congenital deformities in nine patients who were treated with distraction osteogenesis (17). Although all osteotomies healed without grafting, two required operative manipulation for angular deformities. Housian and Ipsen reported their experience with distraction osteogenesis in 14 patients (20). Lengthening rates averaged 0.5 mm/day and they reported one nonunion requiring grafting. Dhalla compared traditional distraction using four transﬁxing pins and a lengthening frame to lengthening over a K-wire with two transﬁxing pins and a frame that was necessitated by the size of the bone (19). While the latter technique was successful, it carried a substantially higher complication rate. Bosch, in his report of reconstruction of thumb amputations by this method in 18 patients, emphasized that the patient should be well informed of the expected duration and results of the procedure (25). In his population, the external ﬁxator was required for an average of 6.8 months. Zimmerman reported a functional outcome of 12 patients undergoing posttraumatic distraction osteogenesis of the thumb (24). All patients could pick up a pencil, could write, and could hold a glass of water. About 70% of patients could employ the reconstructed thumb for ﬁne motor skills and heavy grasping.

& SUMMARY External ﬁxation is a minimally invasive technique that has clear applications and indications throughout orthopedics; however, it remains relatively underemployed in the treatment of phalangeal and metacarpal injuries. External ﬁxation can be considered for: & &

& Distraction Osteogenesis Matev reported his experience with thumb reconstruction by metacarpal lengthening after amputation in 35 adult patients (14). He noted complete consolidation at the distraction osteotomy site in 25 patients and that 10 patients required supplemental bone graft to achieve union. Elongation of the amputated stump of 2 to 4 cm was achieved and the results were maintained at a follow-up of four to eight years after the procedure. He later recommended that lengthening of more than 3 cm in an adult requires the addition of bone graft at the distraction site. He also showed favorable results in seven children (15,16). Toh et al. presented 26 cases of thumb and digital lengthening in adults and observed better results with a proximal metaphyseal osteotomy; ﬁve patients required bone grafting and four patients sustained a fracture (23). The disadvantages of the technique were stated to be the length of time for treatment and external ﬁxator, a higher rate of complication than other reconstructive techniques, and the bulky, complicated external apparatus required. Seitz reported lengthening of 2 to 3.5 cm in 14 patients with various posttraumatic and congenital digital deﬁciencies (18). Premature closure of osteotomy site was not observed and only one patient required supplemental bone graft. Minguella reported on 15 cases of metacarpal lengthening in a larger series of 31 congenital shortenings of the hand and foot (21). An overall complication rate of 22.5% (mostly selfresolving) was reported, leading the authors to recommend that a fast lengthening period (1 mm/day) followed by bone grafting with pin ﬁxation would minimize the length of external ﬁxation use and, therefore, the rate of complication. Pensler et al.

& & & &

open fractures with signiﬁcant soft tissue loss or contamination comminuted closed fractures that are not amenable to stable open ﬁxation delayed union, nonunion, and osteomyelitis which may require signiﬁcant bony reconstruction after debridement small joint arthrodesis joint stabilization skeletal lengthening (distraction osteogenesis).

With the advent of modern, miniaturized external ﬁxation systems, the hand surgeon now possesses the capability of achieving excellent skeletal stability with a limited open technique that allows mobilization of all the joints of the injured digits. More importantly, because the ﬁxator does not impede the gliding of the extensor apparatus, it helps to facilitate a rapid recovery of digital motion and functional outcome. &

ACKNOWLEDGMENTS

I would like to thank Drs. Pedro Beredjiklian and David Bozentka for the contribution of clinical cases to this chapter and Mr. Troy Jordan of Stryker Orthopedics for his technical assistance.

& REFERENCES 1.

Mears DC. History of external ﬁxation. In: Brooker AF, Edwards CC, eds. External Fixation: The Current State of the Art. Baltimore, MD: Williams and Wilkins, 1979:3–12. 2. Crockett DJ. Rigid ﬁxation of bones of the hand using K-wires bonded with acrylic resin. Hand 1974; 6(1):106–7. 3. Dickson R. Rigid ﬁxation of unstable metacarpal fractures using K-wires bonded with acrylic resin. Hand 1975; 7(3):284–6.

External Fixation of the Metacarpals and Phalanges and Distraction Osteogenesis & 81 4. Shehadi S. External ﬁxation of metacarpal and phalangeal fractures. J Hand Surg [Am] 1991; 16(3):544–50. 5. Pritsch M, Engel J, Farina I. Manipulation and external ﬁxation of metacarpal fractures. J Bone Joint Surg [Am] 1981; 63(8):1289–91. 6. Rosenberg L, Kon M. An external ﬁxator for ﬁnger reconstruction. J Hand Surg [Br] 1986; 11(1):147–8. 7. Babu V, Lenin B, Kocialkowski A. External ﬁxation of ﬁnger fractures made simple. Acta Orthop Belg 2005; 71(3):347–8. 8. Asche G, Haas HG, Klemm K. The external mini-ﬁxator: application and indications in hand surgery. In: Brooker AF, Edwards CC, eds. External Fixation: The Current State of the Art. Baltimore, MD: Williams and Wilkins, 1979:105–13. 9. Chappell DA, Saba MM. A miniature external ﬁxator for metacarpals and phalanges. J Med Eng Technol 1986; 10(2):62–4. 10. Sochart DS, Paul S. A simple external ﬁxator for use in metacarpal and phalangeal fractures: a technique paper. J Orthop Trauma 1995; 9(4):333–5. 11. Fricker R, Thomann Y, Troeger H. AO mini external ﬁxator for fractures of the hand: operative technique and initial experience. Chirurg 1996; 67(6):760–3. 12. Mader K, Gausepohl T, Pennig D. Minimally invasive management of metacarpal I fractures with a mini-ﬁxator. Handchir Mikrochir Plast Chir 2000; 32(2):107–11. 13. Margic K. External ﬁxation of closed metacarpal and phalangeal fractures of digits. A prospective study of one hundred consecutive patients. J Hand Surg [Br] 2005; 31(1):30–40. 14. Matev IB. Thumb reconstruction after amputation at the interphalangeal joint by gradual lengthening of the proximal phalanx. A case report. Hand 1979; 11(3):302–5. 15. Matev IB. Thumb reconstruction in children through metacarpal lengthening. Plast Reconstr Surg 1979; 64(5):665–9. 16. Matev IB. Thumb reconstruction in children through metacarpal lengthening. Plast Reconstr Surg 1979; 64(5):665–9. 17. Pensler JM, Carroll NC, Cheng LF. Distraction osteogenesis in the hand. Plast Reconstr Surg 1998; 102(1):92–5. 18. Seitz WH, Froimson AI. Digital lengthening using the callostasis technique. Orthopedics 1995; 18(2):129–38. 19. Dhalla R, Strecker W, Manske P. A comparison of two techniques for digital distraction lengthening in skeletally immature patients. J Hand Surg [Am] 2001; 26(4):603–10. 20. Houshian S, Ipsen T. Metacarpal and phalangeal lengthening by callus distraction. J Hand Surg [Br] 2001; 26(1):13–6. 21. Minguella J, Cabrera M, Escola J. Techniques for small bone lengthening in congenital anomalies of the hand and foot. J Pediatr Orthop 2001; 10(4):355–9. 22. Arslan H. Metacarpal lengthening by distraction osteogenesis in childhood brachydactyly. Acta Orthop Belg 2001; 67(3):242–7. 23. Toh S, Narita S, Arai K, et al. Distraction callotasis in the hand. J Bone Joint Surg [Br] 2002; 84(2):205–10. 24. Zimmermann R, Sailer R, Pechlaner S, et al. Functional outcome with special attention to the dash questionnaire following cllus distraction and phalangization of the thumb after traumatic amputation in the middle one-third. Arch Orthop Trauma Surg 2003; 123(10):521–6. 25. Bosch M, Granell F, Faig-Marti J, et al. First metacarpal lengthening following traumatic amputation of the thumb: long tern follow-up. Chir Main 2004; 23(6):284–8.

26. Nagy L. Static external ﬁxation of ﬁnger fractures. Hand Clin 1993; 9(4):651–7. 27. Peimer CA, Smith RJ, Leffert RD. Distraction-ﬁxation in the primary treatment of metacarpal bone loss. J Hand Surg [Am] 1981; 6(2):111–24. 28. Riggs SA, Cooney WP. External ﬁxation of complex hand and wrist fractures. J Trauma 1983; 23(4):332–6. 29. Freeland AE. External ﬁxation for skeletal stabilization of severe open fractures of the hand. Clin Orthop Relat Res 1987; 214:93–100. 30. Seitz WH, Gomez W, Putnam MD, et al. The management of severe hand trauma with a mini external ﬁxator. Orthopedics 1987; 10(4):601–10. 31. Putnam MD, Walsh TM. External ﬁxation for open fractures of the upper extremity. Hand Clin 1993; 9(4):613–23. 32. Cziffer E. Static ﬁxation of ﬁnger fractures. Hand Clin 1993; 9(4):639–50. 33. Bilos ZJ, Eskestrand T. External ﬁxator use in comminuted gunshot fractures of the proximal phalanx. J Hand Surg [Am] 1979; 4(4):357–9. 34. Bu¨chler U, McCollam SM, Oppikofer C. Comminuted fractures of the basilar joint of the thumb: combined treatment by external ﬁxation, limited internal ﬁxation and bone grafting. J Hand Surg [Am] 1991; 16(3):556–60. 35. Nonnenmacher J. Osteosynthesis of fractures of the base of the ﬁrst metacarpal by an external ﬁxator. Ann Chir Main 1983; 2(3):250–7. 36. Kontakis GM, Katonis PG, Steriopoulos KA. Rolando’s fracture treated by closed reduction and external ﬁxation. Acta Orthop Trauma Surg 1998; 117(1–2):84–5. 37. Lourie GM, Lins RE. Static external ﬁxation in the hand and carpus. Hand Clin 1997; 13(4):627–42. 38. Allieu Y, Chammas M, Hixson L. External ﬁxation for treatment of hand infections. Hand Clin 1993; 9(4):675–82. 39. Seitz WH, Selman DC, Scarcella JB, et al. Compression arthrodesis if the small joints in the hand. Clin Orthop Relat Res 1994; 304:116–21. 40. Behrens F. General theory and principles of external ﬁxation. Clin Orthop Relat Res 1989; 241:15–23. 41. Halliwell PJ. The use of external ﬁxators for ﬁnger injuries: pin placement and tethering of the extensor hood. J Bone Joint Surg [Br] 1998; 80(6):1020–3. 42. Stuchin SA, Kummer FJ. Stiffness of small bone external ﬁxation methods. J Hand Surg [Am] 1984; 9(5):718–24. 43. Pollack AN, Ziran B. Principles of external ﬁxation. In: Browner R, Jupiter J, Levine A, et al., eds. Skeletal Trauma. 2nd ed. Philadelphia, PA: WB Saunders, 1998:267–86. 44. Parsons SW, Fitzgerald JAW, Shearer JR. External ﬁxation of unstable metacarpal and phalangeal fractures. J Hand Surg [Br] 1992; 17(2):151–5. 45. Ashmead D, IV, Rothkopf DM, Walton RL, Jupiter JB. Treatment of hand injuries with external ﬁxation. J Hand Surg [Am] 1992; 17(5):954–64. 46. Soyer A. Fractures of the ﬁrst metacarpal base: current treatment options. J Am Acad Orthop Surg 1999; 7(6):403–12.

11 Percutaneous Release of the Post-traumatic Finger Joint Contracture: A New Technique Joseph F. Slade III

Hand and Upper Extremity Service, Department of Orthopedics and Rehabilitation, Yale University School of Medicine, New Haven, Connecticut, U.S.A.

Thomas J. Gillon

Department of Orthopedics and Rehabilitation, Yale University School of Medicine, New Haven, Connecticut, U.S.A.

& INTRODUCTION Finger joint stiffness can result in severe impairment of hand function and is a difﬁcult problem to treat. Stiffness can result from injury, infection, excess immobilization, and inappropriate splinting (1). An accumulation of ﬂuid or blood within the capsule after trauma will subsequently lead to stiffness. The open surgical management of joint contractures has led to unpredictable results, with some conditions actually worsening postoperatively (2). The lack-luster results of open release of the proximal interphalangeal (PIP) joint have led some surgeons to try less invasive or indirect means of contracture release. These methods, such as external ﬁxators, have shown some early promise in regaining some motion, but are associated with high complication rates (3). It has been suggested that the results of open surgical release of ﬂexion contractures greater than 608 (1) is so poor that arthrodesis is the preferred treatment. We describe a minimally invasive technique for the surgical release of selected joint contractures, through percutaneous surgical release of pathologic structures alone, avoiding injury to normal structures and reducing postsurgical swelling and pain. The reduction in pain and swelling allows for an accelerated rehabilitation program and a more complete recovery of hand function.

& Anatomy The PIP joint is a constrained hinge joint whose stability is conferred by both the matched bone contouring at the joint interface and the capsular complex composed of stout lateral cords and mobile volar plate (4–7). The head of the proximal phalanx is cam-shaped and composed of a bicondylar head with a central groove. The doubly concave surface of the base of the middle phalanx is divided by a midline tongue to guide the joint through its eccentric arc of motion. The main lateral stabilizer of this joint is the proper collateral ligament (4,8,9). This ligament originates from the head of the proximal phalanx and inserts into the base of the middle phalanx. The volar plate is a thick ﬁbrocartilagenous structure distally and a thin membranous structure proximally (9). Distally, it has a ﬁrm attachment to the base of the middle phalanx. Proximally, it has a membranous central attachment with radial- and ulnar-sided thickened bands, the checkrein ligaments (9–11). The proper collateral ligament is joined to the volar plate by shroud-like ﬁbers of the accessory collateral

ligament. These two structures function as a composite unit to resist both the lateral and hyperextension stresses on the joint. In extension, the volar plate is tight and the collateral ligament is moderately lax. As the joint ﬂexes, the collateral ligament tightens over the larger volar condyles to seat the base of the middle phalanx ﬁrmly against the proximal phalangeal head. In ﬂexion, the volar plate is lax. The dorsal capsule is thin and borders the proper collateral ligaments laterally. The dorsal capsule is reinforced and intimately in contact with the central tendon dorsally (9). The average range of motion at the PIP joint is approximately 1108 (12). The metacarpophalangeal (MCP) joint is a condyloid or cam joint. The metacarpal head is eccentric, the radius and width increasing toward its palmar base (4). The MCP joint has a dorsal capsule that extends from the neck of the metacarpal to the base of the proximal phalanx and is reinforced by a loose insertion to the extensor tendon. The volar plate inserts on the base of the proximal phalanx with a stout attachment. Proximally, the volar plate is thin as it attaches to the neck of the metacarpal. Laterally, the volar plate is stabilized by the deep transverse intermetacarpal ligaments. The collateral ligaments complete the sides of the capsular box and are taut with ﬂexion of the MCP joint. The stability of the MCP joint is ensured by this box-like construct. The MCP joint is weakest dorsally and ulnarly, making it vulnerable to dislocations in these directions.

& Etiology In 1954, Curtis described the pathoanatomical tissues that may be involved in both ﬂexion and extension contractures of the PIP joint (8). Extension contractures of the PIP joint can be due to traumatic global scarring of multiple structures, extensor tendon adhesions, interosseous contractures or adhesions, capsular or ligament contractures, and osteophytes or exostosis. Flexion contracture of the PIP joint can be due to volar skin contracture, fascial cord contracture as in Dupytren’s disease, ﬂexor tendon adhesion or sheath contracture, contracture of the volar plate or the capsular structures, collateral ligament contracture or a dorsal bony block (8). Trauma to the ﬁnger or hand causes soft tissue edema and hematomas that can impair hand function (9). The PIP joints’ volume is also affected by position. The PIP joint in moderate ﬂexion permits maximum joint volume and is

84 & Slade and Gillon

the position the joint assumes with joint swelling. Full ﬂexion of the joint will be limited by the edematous dorsal skin and soft tissues (9). If the PIP joint remains in a moderately ﬂexed position, ﬁbrosis, and shortening of the intracapsular and extracapsular structures may occur, leading to a ﬁxed contracture of the PIP joint. Pathologic tissues involved in contracture include exostosis, malunion, adhesions, and Watson’s checkrein ligaments—a thickening of Eaton’s previously described check ligaments. Secondary to the cam effect of the metacarpal–phalangeal joint, where the intracapsular volume is maximal in extension and the capsular ligaments are lax, the accumulation of ﬂuid in the MCP joint forces the MCP joint into extension (9). There are a variety of etiologies that result in soft tissue contractures and joint stiffness. Many authors have written on the importance of the various pathological structures, from the checkrein ligaments to the collateral ligaments (1– 3,8–11,13–19). A careful physical exam and knowledge of the pre-existing condition can help distinguish between malunions or capsulo-ligamentous contractures or tendinous adhesions or muscle weakness/contractures or skin/fascial contractures. Clinically, it can be difﬁcult to identify which structures are predominately responsible for a joint contracture. Therefore, previously described surgical releases have emphasized a stepwise release, which vary from author to author.

& Current Treatment Options The current standard of care for ﬂexion contractures is still preventive and non-operative management. Prevention is based on the principle of early joint motion within the safe arc of motion. Injuries requiring surgical repair should be performed as soon as soft tissues allow in order to achieve the earliest return of joint motion. Once a ﬂexion contracture has occurred, the ﬁrst modality should always be nonsurgical. A variety of techniques have been described: serial casting, dynamic, and/or static splinting. The decision to abandon conservative treatment has no deﬁnitive time line. The literature does not give any speciﬁcs as to when to proceed with surgical release. Most hand surgeons would consider surgical options after a failure to progress with three months of therapy and a range of motion of less than 458. Shin and Amadio suggest surgical release is indicated when residual joint motion is functionally disabling, there is normal to near normal joint articular surface and congruence, the joint motors are intact, and all nonoperative modalities have been correctly applied and exhausted (9). “Surgical release of the severely contracted PIP joint yields unpredictable results and should be considered only when both surgeon and patient understand its limitations” (9). A variety of external ﬁxators have been developed and applied to PIP ﬂexion contractures. External ﬁxators have the advantage of transmitting the extension force through the bone, as opposed to through the skin in splinting or casting. The few small case series in the literature have shown initial favorable results. However, they tend to have a high long-term recurrence of contracture and high rate of pin site infections (1,3,10). Curtis made some of the ﬁrst descriptions of the technique for a capsulectomy (8). He described this through a volar Bruner incision. In 1999, Bruser and colleagues retrospectively reviewed the results of 45 ﬁngers comparing a palmar incision to a midlateral incision for capsulectomy. They found the

improvement in range of motion of the midlateral incision group was statistically signiﬁcantly better than in the volar incision group (14). There have been many reports on the open release of PIP joint contractures with varying results (2,8,10,11,13–18). Curtis reported that the greater the number of anatomic structures involved in the limitation of motion, the worse the postoperative range of motion (8). Ghidella et al. performed a retrospective review of 68 PIP joints released as previously described by Curtis (8), which identiﬁed preoperative and intraoperative factors that were associated with worse outcomes. According to their study, the ideal surgical candidate for correction of a contracted PIP joint has an exostosis (which can be removed), a simple diagnosis, is younger than 28 years, and has a preoperative maximum ﬂexion measurement of !438 (2). In a recent literature review of the treatment of posttraumatic PIP ﬂexion contractures, Hogan and Nunley found that after open release ﬁnger extension most commonly improves approximately 258 to 308 but is often accompanied by a loss of ﬁnger ﬂexion (10). Overall, there has been a net improvement in motion, but some patients even lost motion after open release (2,10).

& Cadaveric Studies Five fresh frozen hands were thawed and the index, long, ring, and little were examined using imaging to ensure congruent gliding and to rule-out bony deformity. The dorsal joint capsule of the MCP and PIP joints was located using ﬂuoroscopy. A 19-gauge needle was placed laterally into the dorsal joints under the capsule and perpendicular to the digit. A 15-blade scalpel was used to incise the skin longitudinally and a small curved hemostat was used to bluntly dissect the soft tissue and punch into the dorsal joint through the capsule. Imaging was used to conﬁrm the position of the hemostat in the dorsal joint. The hemostat was then pivoted at the joint entrance sweeping the tips proximally over the dorsal head, rupturing the proximal dorsal capsule attachment. Sweeping more proximal the extensor tendon was elevated off the proximal phalanx. Having completed the percutaneous release, traction was placed on the extensor, ﬂexor, and intrinsic tendons, which were previously identiﬁed and tagged. Each of the digits demonstrated normal congruent joint gliding through a complete ﬂexion and extension arc, with tip to palm and full extension without extensor lag. Lastly, each of the digits was dissected by making a longitudinal incision and the dorsal joint portal site was identiﬁed. The dorsal proximal capsule was completely divided. No extensor or joint injury was identiﬁed.

& INDICATIONS Once a ﬂexion contracture has occurred, the patients are enrolled in a hand rehabilitation program before surgery until progress in therapy has reached a plateau, usually not before three months. Patients selected for surgical release complained of joint stiffness impairing hand function, possessed a normal congruent articular joint surface, and had normal motor function. Extensive previous surgery with altered anatomic landmarks may be a contraindication to surgery.

Percutaneous Release of the Post-traumatic Finger Joint Contracture & 85 (A)

(B)

(C)

(D)

FIGURE 1 Percutaneous release of PIP extension contracture. (A) Lateral ﬂuoroscopy of previously injured PIP now with extension contracture. (B) Fluoroscopically guided placement of 19-gauge needle into dorsal aspect of PIP joint. (C) Lateral view of anteriolateral placement of 19-gauge needle. (D) AP view of anteriolaterally placed needle. Abbreviation: PIP, proximal interphalangeal.

FIGURE 2 Fluoroscopic image of 15-blade anteriolateral stab wound into dorsal skin.

86 & Slade and Gillon (A)

(A)

(B)

(B)

FIGURE 3 Percutaneous dorsal capsular release with hemostat. (A) Intraoperative view of small curved hemostat placed percutaneously into dorsal PIP joint. (B) Intraoperative lateral ﬂuoroscopic view of small curved hemostat placed percutaneously into dorsal PIP joint to release dorsal capsular and extensor tendon adhesions.

FIGURE 4 (A) Intraoperative view showing regain of full ﬂexion at PIP joint after percutaneous release. (B) Intraoperative lateral ﬂuoroscopic view showing regain of 858 of ﬂexion at PIP joint after percutaneous release.

& PERCUTANEOUS SURGICAL TECHNIQUE

With ﬂexion contractures, the hemostat can be swept volarly and used to break adhesions between the distal attachment of the volar plate and the base of the middle phalanx, as well as the proximal attachments of the volar plate and checkreins to the volar head of the proximal phalanx. Care must be taken to glide the hemostat volarly close to bone avoiding the neurovascular structures. With severe scarring of the soft tissue, this maneuver is contraindicated because of the potential for injury to the neurovascular structures. The joint is then passively ﬂexed and extended under imaging to determine the intraoperative gain in the arc of motion and to conﬁrm congruent gliding (Figs. 4A,B and 6). This percutaneous joint release can also be performed on the distal interphalangeal joint (DIP) joint in a similar fashion since the DIP has similar anatomical structures to the PIP joint (Fig. 5A–C). Figures 1–6 show percutaneous release of both the PIP and DIP in a 25-year-old male who had previously undergone a radioulnar ligamentous reconstruction with bone anchors after a dislocation injury. He subsequently developed an extension contracture at his index ﬁnger and failed conservative management.

The procedure can be performed under local, regional, or general anesthesia. A tourniquet is placed on the patient’s arm and inﬂated after the ﬁnger, hand, and forearm have been exsanguinated. Under ﬂuoroscopic guidance, a 19-gauge needle is placed into the PIP or MCP joint from an anteriolateral direction at the joint line, volar to the joint capsule and extensor mechanism (proximal to the central slip of PIP joint) and dorsal to the collateral ligaments (Fig. 1A–D). A scalpel is used to incise the skin only (Fig. 2). The needle is removed and a small hemostat snap is inserted and the skin is bluntly dissected to the dorsal joint capsule and with direct pressure the joint capsule is penetrated under ﬂuoroscopic guidance (Fig. 3A,B). Using live ﬂuoroscopy, the small curved hemostat position is conﬁrmed in the dorsal joint under the capsule and extensor tendon (Fig. 3B). The hemostat is swept proximally rupturing the dorsal capsule and elevating the extensor tendon capsule and breaking any adhesions from the dorsal aspect of the proximal phalanx or metacarpal head. The hemostat is then swept laterally between the collateral ligaments and the head of the proximal phalanx or metacarpal, breaking up any additional adhesions.

Percutaneous Release of the Post-traumatic Finger Joint Contracture & 87 (A)

Postoperatively, the patient is started on an immediate rehabilitation program to maintain the motion gained intraoperatively. Therapy will employ digital wraps to control swelling and selective blocks are used to control pain. Narcotics and NSAIDs are employed postoperatively, the former to control pain and the latter to reduce inﬂammation. Prior to surgery, arrangement for postoperative rehabilitation with a skilled hand therapist is essential, as well as patient knowledge of and compliance with the postoperative program.

& RESULTS

(B)

Between 2003 and 2006, 60 patients were treated with percutaneous release of the MCP and PIP joints. Patients were started on an immediate hand therapy program postoperatively. The best results were observed in the young with a single pathological diagnosis. Those with crush injuries and scarring of multiple structures did the poorest and required multiple procedures. No complications were recorded including neurovascular injury, tendon disruption, or joint arthrosis.

& SUMMARY

(C)

FIGURE 5 Percutaneous release of DIP joint extension contracture by same method described for PIP joint. (A) Fluoroscopically guided placement of 19-gauge needle into dorsal aspect of DIP joint. (B) Lateral view of anteriolateral placement of 19-gauge needle into DIP. (C) Percutaneous placement of small curved hemostat into dorsal DIP capsule.

If extracapsular structures, i.e., tendon adhesions, are suspected to be an additional etiology of the contracture, they can be addressed at this time. A single 5-0 nylon interrupted suture is used to close the PIP joint wound. The ﬁnger is placed in a light dressing and splinted into the corrected position.

In 1977, Harrison suggested that “adhesions between the collateral ligaments and the sides of the phalangeal head are a more important cause of stiffness than shortening of the collateral ligament itself” (18). Since then many papers have been written on the stiff PIP joint and implicated various pathoanatomical etiologies, most of which pertain to either the collateral ligaments or the checkrein ligaments (2,8,11,13–19). Stanley et al. described a series of percutaneous releases of the accessory collateral ligament of the PIP joint (19). While their case number was small and follow-up limited, they reported a mean correction of 64% of the original contracture—similar to the results of many open release case studies (19). They recognized that their procedure also had the beneﬁt of dividing adhesions between the collateral ligament and the phalangeal head. We believe that intracapsular adhesions and ﬁbrosis play a large role in the post-traumatic MCP and PIP contracture, which is evident by the signiﬁcant increase in motion postoperatively in our series. While this procedure does not address all the pathological components of a ﬂexion contracture, the motion gained and the minimal invasiveness of the procedure substantiate its use prior to subjecting the ﬁnger to the more invasive open procedures. This technique has certain advantages over both open and external ﬁxation procedures. In the described percutaneous release, all of the soft tissue stabilizers of the joint remain intact, thus, avoiding the potential of joint instability. The procedure can be performed in a matter of minutes, enabling multiple ﬁngers to be addressed at once and it can be used as an adjunct to other procedures such as tenolysis or fasciectomy. The healing time is quicker than an open procedure, allowing a theoretical improved patient compliance with the postoperative rehabilitation. As opposed to external ﬁxators, which have approximately a 40% infection rate (3), we had no incidence of postoperative infection. Patients also do not have to worry about pin loosening, external ﬁxator care, or the prominence of the ﬁxator, which can be cumbersome with certain activities especially if dealing with multiple or non-border digits.

88 & Slade and Gillon

FIGURE 6 Intraoperative ﬂuoroscopy and photo showing 908 of ﬂexion at the PIP and 608 at the DIP joints with ﬂexor tendon tensioning after percutaneous release of both joints.

& SUMMATION POINTS

Indications & & &

Soft-tissue contractures of MP, PIP, and DIP joints Normal articular anatomy Joints that fail conservative treatment including therapy and splinting

6. 7. 8. 9.

Outcomes & & &

Excellent range of motion with less soft-tissue scarring Low complication rate Short surgical time allowing multiple digits to be treated

10. 11.

Complications & &

Failure to achieve adequate release Tendon injury (theoretical)

12. 13.

& REFERENCES 1. 2. 3.

4. 5.

Segalman K. Surgical management of the stiff PIP joint. In: Proceedings of the 61st Annual Meeting of the American Society for Surgery of the Hand. Washington, DC: Omnipress, 2006. Ghidella SD, Segalman KA, Murphey MS. Long-term results of surgical management of proximal interphalangeal joint contracture. J Hand Surg [Am] 2002; 27(5):799–805. Houshian S, Gynning B, Schroder HA. Chronic ﬂexion contracture of proximal interphalangeal joint treated with the compass hinge external ﬁxator. A consecutive series of 27 cases. J Hand Surg [Br] 2002; 27(4):356–8. Gutow AP, Slade JFI, Mahoney JD. Phalangeal injuries. In: Thomas E, Trumble MD, eds. Hand Surgery Update 3. Rosemont, IL: American Society for Surgery of the Hand, 2003:3–28 (chap. 1). Slade JFI, Choi J, Panjabi M, Wolfe S. The inﬂuence of joint position on fracture type and soft tissue injuries of proximal interphalangeal joint injuries. Orthop Trans 1997; 21(1):349.

14. 15. 16. 17. 18. 19.

Slade JFI, Choi J, Wolfe S. A cadaveric model of the unstable fracture-dislocation of the proximal interphalangeal joint. Orthop Trans 1997; 21(1):120. Slade JI, Baxamusa T, Wolfe S. External ﬁxation of proximal interphalangeal joint fracture dislocations. In: Raskin KB, ed. Atlas of the Hand Clinics, March 2000, (5)1:1–29. Curtis RM. Capsulectomy of the interphalangeal joints of the ﬁngers. J Bone Joint Surg 1954; 36-A(6):1219–32. Shin A, Amadio P. Stiff ﬁnger joints. In: Green P, Hotchkiss Wolfe, eds. Green’s Operative Hand Surgery. Philadelphia, PA: Elsevier, 2005:417–38 (chap. 11). Hogan CJ, Nunley JA. Posttraumatic proximal interphalangeal joint ﬂexion contractures. J Am Acad Orthop Surg 2006; 14(9):524–33. Watson HK, Light TR, Johnson TR. Checkrein resection for ﬂexion contracture of the middle joint. J Hand Surg [Am] 1979; 4(1):67–71. Hume MC, Gellman H, McKellop H, Brumﬁeld RH, Jr. Functional range of motion of the joints of the hand. J Hand Surg [Am] 1990; 15(2):240–3. Abbiati G, Delaria G, Saporiti E, Petrolati M, Tremolada C. The treatment of chronic ﬂexion contractures of the proximal interphalangeal joint. J Hand Surg [Br] 1995; 20(3):385–9. Bruser P, Poss T, Larkin G. Results of proximal interphalangeal joint release for ﬂexion contractures: midlateral versus palmar incision. J Hand Surg [Am] 1999; 24(2):288–94. Curtis RM. Management of the stiff proximal interphalangeal joint. Hand 1969; 1:32–7. Diao E, Eaton RG. Total collateral ligament excision for contractures of the proximal interphalangeal joint. J Hand Surg [Am] 1993; 18(3):395–402. Gould JS, Nicholson BG. Capsulectomy of the metacarpophalangeal and proximal interphalangeal joints. J Hand Surg [Am] 1979; 4(5):482–6. Harrison DH. The stiff proximal interphalangeal joint. Hand 1977; 9(2):102–8. Stanley JK, Jones WA, Lynch MC. Percutaneous accessory collateral ligament release in the treatment of proximal interphalangeal joint ﬂexion contracture. J Hand Surg [Br] 1986; 11(3):360–3.

Part IV: Minimally Invasive Procedures of the Carpus

12 Percutaneous Scaphoid Fixation via a Dorsal Technique Joseph F. Slade III

Hand and Upper Extremity Service, Department of Orthopedics and Rehabilitation, Yale University School of Medicine, New Haven, Connecticut, U.S.A.

Greg Merrell

Department of Orthopedics, Brown University School of Medicine, Providence, Rhode Island, U.S.A.

& INDICATIONS This technique is appropriate for any acute scaphoid fracture in the waist or proximal pole. Many angular or translational displacements can be corrected and rigidly ﬁxed percutaneously. Fractures of the distal pole may be more appropriately treated conservatively or with volar ﬁxation to maximize screw purchase in the distal fragment. We recommend starting with nondisplaced fractures to establish the skill set needed for more difﬁcult displaced fractures.

& CHOICE AND POSITION OF IMPLANT An increasing variety of compression screws are available for ﬁxation of scaphoid fractures. Toby found resistance to cyclic loading was proportional to the radius of the screw to the fourth power (r4) (1). Further, he found the cannulated Acutrak (Acumed, Beaverton, Oregon, U.S.A.) screw was the strongest headless compression screw, giving the highest number of cycles to failure. The Herbert-Whipple (Zimmer, Warsaw, Indiana, U.S.A.), and AO (Synthes Corp., West Chester, Pennsylvania, U.S.A.) lag screws failed catastrophically with a resulting “windshield wiper” effect under conditions of volar comminution. The Acutrak screw underwent gradual separation via plastic deformation rather than catastrophic failure. Trumble described the clinical importance of central axis screw placement (2).

& TECHNIQUE & A Simple New Targeting Guide We now use an external cross Kirschner (K) wire targeting guide. This simple technique permits external sighting of the central axis by percutaneously placed perpendicular K-wires. This system also decreases radiation exposure as imaging is used primarily to set up the initial targeting system. This guide requires the placement of two K-wires in the distal scaphoid in the same axial plane, one perpendicular to the scaphoid, and one offset in a 908 arc. First a wire is driven dorsal to volar in the Posteroanterior (PA) plane of the distal scaphoid while ulnar deviating the wrist to extend the scaphoid (Fig. 1). A second wire is placed in the lateral scaphoid-radial to ulnar (Fig. 2). These wires cross at the distal scaphoid central axis and form a crosshair target for guidewire placement (Fig. 3). With the wrist extended and ulna deviated, PA imaging of the dorsal scaphoid

wire if correctly perpendicular to the bone axis will appear as a single dark point. The lateral radial wire is introduced also perpendicular to the distal scaphoid and driven toward and across the dorsal wire as it appears on image as a single point. A lateral ﬂuoroscopic image will conﬁrm that the lateral wire has been placed in the mid axis of the distal scaphoid.

& Technique for Displaced Fractures After the “external cross K-wire scaphoid guide” is in place, a PA image is obtained and the fracture site is identiﬁed. Since the distal scaphoid fracture fragment is usually ﬂexed exposing the dorsal intramedullary canal of the scaphoid, a K-wire can be introduced into the fracture site and driven through the distal scaphoid intramedullary canal. The “external cross K-wire scaphoid guide” provides direction as the wire is driven from dorsal to volar. The proximal fragment at this time is irrelevant, and will later be reduced. The wire is withdrawn volarly until the trailing edge of the wire is at the fracture site. Now a 0.062 K-wire joystick is placed in the proximal fragment, dorsal to volar. The wrist is placed in a neutral position and imaged, as the two dorsal joysticks (one in the distal fragment and one in the proximal scaphoid fragment) are manipulated until fracture alignment is obtained (Fig. 4). The lateral view of the concave scaphoid surface serves as the key reference for fracture reduction. Fracture reduction is secured by driving the volar wire retrograde across the fracture site. Note if a dorsal intercalated segment instability deformity is present due to the extreme scaphoid ﬂexion at the fracture site, fracture reduction can be achieved by hyper ﬂexion of the wrist until the lunate is in a neutral position and a wire is driven through the distal radius into the lunate securing it provisionally in a neutral position. Or the wire can be placed dorsal directly into the lunate in a neutral position. As long as an intact scapholunate interosseous (SLIO) ligament exist the reduction force is transferred from the lunate to the scaphoid (Fig. 5).

& Technique for Nondisplaced Fractures Once reduction and provisional ﬁxation of the displaced fracture has occurred or in the case of a nondisplaced fracture proceed as follows. With the wrist partially ﬂexed a miniﬂuoroscopic unit is used to locate the tip of the proximal scaphoid pole, the starting point for the central axis scaphoid guidewire. Drive the central axis wire toward the thumb base,

90 & Slade and Merrell

FIGURE 1 First 0.062 00 targeting wire placed dorsal to volar in the distal scaphoid with the wrist in ulnar deviation to extend the scaphoid.

correcting its direction with the use of the external K-wire targeting guides (the dorsal wire provides radial–ulnar guidance and the lateral K-wire provides dorsal–volar orientation). A correctly placed central axis scaphoid wire will hit the crossing wires in the distal scaphoid, the location of the

central axis. The wire is driven volarly past this intersection, through the trapezium, and exits at the thumb base in a safe zone without neurovascular structures. The wire is advanced volarly until the trailing edge crosses the radiocarpal joint and the wrist can be safely extended. In the case of a displaced

FIGURE 2 Second 0.062 00 targeting wire placed radial to ulnar in the mid-lateral position of the distal scaphoid.

Percutaneous Scaphoid Fixation via a Dorsal Technique & 91

FIGURE 3 Pronated, ulnarly deviated view of the central axis with the targeting system guide wires in place.

fracture there are now two wires down the length of the scaphoid, one was used to capture the initial reduction and the second placed down the long axis (Fig. 6). The wire used to capture the reduction also acts as an anti-rotation construct during scaphoid reaming and screw placement. For nondisplaced fractures a second wire is rarely needed. Imaging conﬁrms the position of the wire and the scaphoid fracture reduction. If satisfactory, the next step is an arthroscopic inspection of the joint.

& ARTHROSCOPY The goal of arthroscopy is to identify and treat ligament injuries, and directly inspect the quality of the reduction. The elbow is ﬂexed and the wrist is positioned upright in a spring-scale

driven traction tower. Twelve pounds of traction is distributed between four ﬁnger traps to reduce the possibility of a traction injury. If the ﬁnger traps slip off, apply mastisol or steristrips circumferentially at the base of the ﬁnger trap. The arm is exsanguinated. A ﬂuoroscopy unit is placed horizontal to the ﬂoor and perpendicular to the wrist as the radiocarpal and midcarpal joint are identiﬁed with imaging. 19-gauge needles are introduced into the wrist joint identifying the radiocarpal and midcarpal portals. This maneuver minimizes iatrogenic injury to the joint. The skin is incised and a blunt hemostat is used to separate the soft tissue and enter the wrist joint. A blunt trocar is placed at the radial midcarpal portal and a small joint angled arthroscope is inserted. A 19-gauge needle is inserted to establish outﬂow. A probe is introduced at the

FIGURE 4 Displaced scaphoid fracture with 0.062 00 joysticks in place prior to reduction, ﬂuoroscopic image of fracture reduction using joysticks, capturing the reduction with the central axis wire.

92 & Slade and Merrell

FIGURE 5 Wire to control dorsal intercalated segment instability deformity of the lunate.

B

D C

ulnar midcarpal portal and subsequently at the third and fourth portal to assess the competency of the carpal ligaments by directly stressing their attachments to detect partial and complete tears. First identify the scapholunate ligament sulcus. Injuries to the scapholunate ligament detected are graded using the Geissler grading system (3). Grade I and II ligament injuries are debrided. Grade III injuries are debrided and pinned for six weeks. Grade IV ligament injuries require open repair of the dorsal SLIO ligament with bone anchors and carpal pinning. The need for the addition of a dorsal capsulodesis tether is determined by the quality of the acute repair after scaphoid ﬁxation. Tears of the triangular ﬁbrocartilage complex are classiﬁed using the Palmer classiﬁcation and treated accordingly (4).

& SCAPHOID LENGTH The screw length should be 4 mm less than the scaphoid length. This permits 2 mm of clearance at each end of the scaphoid, thus minimizing the risk of prominent hardware. The most common complication of percutaneous scaphoid ﬁxation, is implantation of a screw which is too long (5).

A & FIXATION

FIGURE 6 (A) Wire to control lunate position, (B) percutaneous snap to assist with reduction, (C) wire used to capture reduction and now serves as derotation wire, and (D) central axis wire.

Remove the extremity from the arthroscopy traction tower, ﬂex the wrist and advance the wire retrograde until it is equally exposed on both ends. This prevents the wire from becoming dislodged during reaming. It is crucial that the wrist maintains a ﬂexed position to prevent the wire from bending. Dorsal placement is recommended for fractures of the proximal pole

Percutaneous Scaphoid Fixation via a Dorsal Technique & 93

FIGURE 7 Increasing fracture stability by mechanical block of scaphoid lever arm.

and volar implantation is used for distal pole fractures. Fractures of the waist may be ﬁxed from either a dorsal or volar approach. Volar implantation often requires reaming through part of the trapezium, since this is the central axis. Blunt dissection along the guide wire exposes a tract to the dorsal wrist capsule and the scaphoid base. The scaphoid is reamed 2 mm short of opposite cortex with a cannulated hand drill. Newer self-drilling screws have reduced the need for extensive reaming, but the scaphoid should still be reamed past the fracture site to prevent gapping. It is critical to use ﬂuoroscopy to check the position and depth during reaming. The scaphoid should never be reamed to the opposite bone cortex (over-drilling). This reduces fracture compression and increases the risk of motion at the fracture site. A standard Acutrak screw is advanced under ﬂuoroscopic guidance down the central scaphoid axis to within 1 to 2 mm of the opposite cortex. If the screw is advanced to the distal cortex, attempts to advance the screw further will force the fracture fragments to gap and separate. With unstable or displaced fractures, a counter force is applied with the dorsal K-wire holding pressure against the proximal fragment to prevent gapping. Unstable fractures may not achieve rigid ﬁxation with screw implantation alone. Other temporary ﬁxation may be required, to achieve a rigid

construct, until healing has occurred. The distal scaphoid pole acts as a long lever arm to the proximal scaphoid pole and proximal carpal row during wrist motion. Proximal pole fractures have only a few threads crossing the fracture line. Wrist motion results in continuous rocking at the fracture site. The forces concentrated here are signiﬁcant and can result in reduction of compression and loosening of ﬁxation. These forces can be balanced by the placement of a 0.062 inch K-wire or headless compression screw from the scaphoid into the capitate (Fig. 7). These instruments temporarily blocks midcarpal motion and reduce forces acting on the scaphoid fracture site. Another mechanical block is a 0.062 inch K-wire placed between the II or III web-space into the capitate and the lunate. After healing has been conﬁrmed with computed tomography (CT) scan, these mechanical blocks are removed percutaneously. Severe comminution may make rigid ﬁxation impossible. In these cases, align the scaphoid fracture fragments with multiple K-wires down the central axis, and stabilize the capitolunate joint with K-wires. After, one month, these provisional ﬁxation wires are removed. Dorsal percutaneous bone grafting of the scaphoid and rigid ﬁxation of the scaphoid with a headless compression screw can then be accomplished.

94 & Slade and Merrell

& POST-OPERATIVE CARE AND SCAPHOID HEALING

& SUMMATION POINTS

Immediate post-operative care includes a bulky compressive hand dressing and a volar splint. The patient is encouraged to initiate early ﬁnger exercises to reduce swelling. The therapist fashions a removable volar splint that holds the wrist and hand in a functional position at the ﬁrst post-operative visit. An immediate strengthening program is initiated to axially load the fracture site. This early motion also decreases swelling and permits an early return of hand function. Patients with ligament injuries or proximal pole fractures, are restricted from wrist motion until CT scan conﬁrms bridging bone at the fracture site at six weeks post-op. Post-operative radiographs are obtained with the ﬁrst post-operative visit and at six week intervals. CT scans with 1 mm cuts and sagittal and coronal reconstructions are used to evaluate bridging bone at the fracture site. CT scans are ordered at six weeks intervals until ﬁnal union is established. Standard radiographs at three months are unreliable in detecting scaphoid healing (6). Patients are often pain free, prior to CT evidence of healing. Contact sports and heavy labor are restricted, until fracture healing is conﬁrmed by CT. If bridging bone is not identiﬁed by 12 weeks one must consider aggressive treatment including percutaneous bone grafting. Delay in treatment for early nonunions, delays healing. We do not routinely cast our scaphoid fractures post-operatively, but candidates for additional protection are evaluated on an individual basis.

Indications

& SUMMARY Scaphoid fractures are common injuries that often require surgical treatment. Closed treatment is complicated by prolonged casting and associated stiffness. The advent of cannulated headless screws has simpliﬁed the treatment of these difﬁcult fractures. Percutaneous treatment of scaphoid fractures offers high healing rates with minimal soft-tissue trauma.

& &

Non and minimally displaced scaphoid fractures Displaced fractures are amenable, but require additional joy stick K-wires and is more technically challenging.

Outcomes & & &

High healing rates Quicker return to activities and work Less wound problems and scar tenderness.

Complications & & &

Similar to open technique Nonunions Hardware problems (screw excessively long).

& REFERENCES 1. Toby EB, Butler TE, McCormack TJ, Jayaraman G. A comparison of ﬁxation screws for the scaphoid during application of cyclic bending loads. J Bone Joint Surg 1997; 79:1190–7. 2. McCallister WV, Knight J, Kaliappan R, Trumble TE. Central placement of the screw in simulated fractures of the scaphoid waist: a biomechanical study. J Bone Joint Surg 2003; 85A:72–7. 3. Geissler WB, Freeland AE, Savoie FH, McIntyre LW, Whipple TL. Intracarpal soft-tissue lesions associated with an intra-articular fracture of the distal end of the radius. J Bone Joint Surg Am 1996; 78(3):357–65. 4. Palmer AK. Triangular ﬁbrocartilage complex lesions: a classiﬁcation. J Hand Surg 1989; 14A:594–606. 5. Bond CD, Shin AY, McBride MT, et al. Percutaneous screw ﬁxation or cast immobilization for nondisplaced scaphoid fractures. J Bone Joint Surg Am 2001; 83-A(4):483–8. 6. Dias JJ. Deﬁnition of union after acute fracture and surgery for fracture nonunion of the scaphoid. J Hand Surg Br 2001; 26(4):321–5.

13 Percutaneous Fixation of Acute Scaphoid Fractures John T. Capo, Tosca Kinchelow, and Virak Tan

Department of Orthopedics, The New Jersey Medical School, University of Medicine and Dentistry of New Jersey, Newark, New Jersey, U.S.A.

& INTRODUCTION Fractures of the scaphoid are common injuries, representing 60–70% of carpal fractures (1,2). Inadequate treatment of these injuries can result in nonunion, osteonecrosis, carpal instability patterns, all of which can lead to impaired function, and arthrosis (3–5). Early results of cast immobilization of acute fractures were quite favorable, reporting union rates of 88–100% and good motion, grip strength, and function (6–9). However, subsequent series have shown more discouraging results, particularly with fractures displaced more than 1 mm (10,11). The ﬁrst factor in initiating appropriate treatment is the proper and timely diagnosis of these fractures. Once diagnosed, the fracture can be managed by closed, open, or percutaneous methods. Internal ﬁxation has the advantage of providing compression and a stable construct which can allow early range of motion (ROM) (12–17). However, an open approach risks stripping of the critical blood supply to the scaphoid and also division of important carpal ligaments, such as the radioscaphocapitate ligament (18). Percutaneous techniques have since been developed, providing the beneﬁts of ORIF with a smaller incision, preservation of the carpal ligaments and potentially fewer wound problems.

& INDICATIONS The ultimate goal in any scaphoid treatment is to obtain and maintain anatomic alignment while preserving vascularity until complete fracture healing has occurred. Operative ﬁxation is suggested when acceptable alignment cannot be reached by closed treatment. In addition, with the documented success of percutaneous screw ﬁxation (3,19–22), we believe that this technique should be offered to all patients with a complete scaphoid fracture, even if minimally or non-displaced. The patient should be educated about the two treatment options: long-arm followed by short-arm casting versus operative percutaneous screw ﬁxation. We explain the risks and advantages of operative treatment as well as the risks and details concerning the prolonged length of non-operative treatment. In our experience, approximately 50% of patients select operative ﬁxation. Other indications include the multiply injured patient either in the same or other extremities. Patients with ipsilateral distal radius fractures and elbow fractures, as well as those with lower extremity injuries that need to use assistive aids to mobilize, are good candidates for operative treatment of minimally displaced scaphoid fractures. Fractures with a small amount of displacement (2–3 mm) or angulation (208 intrascaphoid angle) and no comminution at the fracture site may also be treated with percutaneous means. Kirschner (K)-wires can be used as joysticks to manipulate the proximal and distal fragments before guide wire placement.

Contraindications to percutaneous ﬁxation include moderate or severe fracture displacement requiring open reduction, nonunion with signiﬁcant bone resorption requiring supplemental cancellous bone graft, avascular necrosis (AVN) requiring a vascularized bone graft, and a displaced nonunion with a “humpback” deformity requiring a structural bone graft to restore normal carpal alignment.

& PREOPERATIVE PLANNING & Physical Examination The ideal patient for this technique is a young healthy male laborer or athlete with a mid-waist acute fracture with minimal displacement. The mechanism of injury usually includes load to the dorsiﬂexed, radially deviated wrist. On physical exam, there is typically mild to moderate edema, painful, limited ROM, and tenderness of the scaphoid. The body of the scaphoid can be palpated in the interval between the ﬁrst and second dorsal compartments dorso-radially and becomes more prominent with ulnar deviation of the wrist. The scaphoid tuberosity can be palpated volarly at the wrist crease, just radial to the ﬂexor carpi radialis tendon. The scaphoid compression test (23) is positive when axially loading the thumb metacarpal toward the wrist causes pain.The Distal radial–ulnar joint, ulnar side of the wrist, and elbow should be examined for tenderness and crepitus. Soft tissues need to be evaluated, including a thorough neurovascular exam. For proper edema management, the patient should be instructed on ﬁnger motion exercises and elevation of the extremity, in either deﬁnitive closed management or for temporary immobilization before operative treatment.

& Imaging Standard plain radiography is mandatory, including posteroanterior (PA), lateral, oblique, and PA ulnar deviation views. This last view is termed the “scaphoid view” and extends the scaphoid, thereby visualizing an elongated view of the entire bone (Fig. 1). Images of the contralateral side may be useful, particularly in assessing any deformity. It is important to evaluate radiographs for the presence of an acute or chronic fracture and scaphoid deformity, since this will inﬂuence whether ﬁxation can be done percutaneously. Radiographic parameters for inadequate reduction are: displacement O1 mm, a scapholunate angle O608, radiolunate angle O15–308, an intrascaphoid angle O358, or a scaphoid heightto-length ratio O0.65 (7,24–27).

& Advanced Imaging When plain ﬁlms are equivocal for fracture and the patient has scaphoid tenderness, management is controversial. While

96 & Capo et al. (A)

[bone scan or magnetic resonance imaging (MRI)] should be obtained (23). Attention has been given to the inaccuracy of plain radiography in diagnosing occult scaphoid fractures initially and postinjury (8,28). Furthermore, advanced imaging has been shown to be much more reliable (29–31), with a quoted sensitivity of 100% and speciﬁcity 95–100% for MRI scanning. Dorsay (32) compared the reliability of plain ﬁlms and MRI in diagnosing occult scaphoid fractures and evaluated the costs associated with each. MRI was more sensitive, speciﬁc, and had a higher interobserver reliability than plain ﬁlms. Additionally, the cost of an early screening MRI in a case with clinical suspicion and negative radiographs was comparable to the cost of lost work time due to keeping a patient immobilized for one to two weeks. In our practice, if a patient has an injury mechanism and clinical exam consistent with a scaphoid fracture with negative radiographs, we immobilize the wrist in a short-arm thumb-spica cast. If these parameters are the same follow-up exam in one to two weeks, then an MRI study is ordered.

& SURGICAL TECHNIQUE & Operating Room Setup and Equipment

(B)

The following equipment is needed: a mini-ﬂuoroscopy machine, non-sterile arm tourniquet, small battery drive drill, K-wires, and a cannulated, headless screw set (headed screws may also be used). While there are currently several commercially available screws that can be used, most instrumentation systems are similar and utilize some variation of the following: a guide wire, a cannulated drill bit, reamer, tap and screwdriver, a countersink, and screws. Wire size and screwdriver/instrumentation gauge vary, but we have found that a guide wire of at least 0.035 inch is ideal, as it provides better control for accurate placement into the proximal pole. General or regional anesthesia may be used. The patient is positioned supine with a radiolucent hand table. Some authors place the patient in ﬁngertraps, with traction and weights, as needed (3,11,20). This helps to ulnarly deviate the wrist, which uncovers the distal scaphoid from the radial styloid and allows free rotation of the hand (11,20). We prefer to place the hand over a small towel role for wrist extension and apply only manual, intermittent traction to the ﬁngers (Fig. 2). However, in the case of a displaced fracture, traction can aid in closed reduction (29).

& Surgical Technique

FIGURE 1 (A) PA view of the wrist with a questionable scaphoid waist fracture. (B) Ulnar deviation PA view clearly demonstrating complete scaphoid fracture. Abbreviation: PA, posteroanterior. Source: Courtesy of John T. Capo, MD.

it has been proposed that any fracture not seen on radiographs is incomplete and does not require immobilization (8), the usual practice is to presume that a complete fracture is present. Traditionally, the patient is immobilized for one to two weeks and then re-examined and re-imaged. By that time, bony resorption at the fracture may demonstrate lucency within the scaphoid, conﬁrming a fracture. If plain ﬁlms remain equivocal and/or the patient remains tender, another immobilization trial can be done (8) or advanced imaging

Ultimately, the location of the skin incision will be directed by wire placement. This is usually on the distal volar–radial aspect of the scaphoid near the scaphotrapezial (ST) joint. Care should be taken to avoid the dorsal aspect of the ST joint because the dorsal branch of the radial artery is in this area. There exist key landmarks to aid in proper guide wire starting hole placement. This location can be approximated by simply drawing bony structures with a skin marker and noting the level of the ST joint and radial aspect of the scaphoid (Fig. 3). Alternatively, the location can be found at the intersection of two lines drawn in line with K-wires placed on the outside of the skin parallel to the long axis of the scaphoid on frontal and lateral views (22,33). Typically, the wire must start through the volar, proximal corner of the trapezium, thus allowing access to the center of the distal scaphoid pole. Therefore, the subsequent drilling removes this edge of trapezium and screw placement traverses the defect to be countersunk in the scaphoid. Alternatively, a small piece of

Percutaneous Fixation of Acute Scaphoid Fractures & 97

FIGURE 2 The wrist is extended over a small towel roll. This allows guide wire access to the trapezium and distal scaphoid pole. Source: Courtesy of John T. Capo, MD.

the trapezium can be removed with a rongeur to allow unhindered placement of the guide wire, requiring a larger incision and dissection to directly visualize the ST joint. Another alternative is to avoid violating the trapezium by using a more radial starting point (34). The ﬁnal position of the wire (and subsequent screw) is the most critical part of the procedure and should be in the center of the proximal pole of the scaphoid in all radiographic views. In Trumble’s (35) study of screw ﬁxation with bone graft in 34 patients with scaphoid nonunion, those with screws placed in the central one-third of the proximal pole had a signiﬁcantly faster time to union than those with peripherally placed screws. McCallister (36) supported these results in a biomechanical study, ﬁnding that a center–center screw placement in the proximal pole of the scaphoid provided a construct that was

signiﬁcantly stiffer (43%) and more resistant to displacement (113%) than an eccentrically placed screw. The guide wire must be within the scaphoid body in all views, with enough clearance on each side for screw placement (Fig. 4). A 458 pronated (oblique) view is helpful to assess the proximal pole wire placement, as wire penetration through the proximal scaphoid articular surface can be missed on standard PA and lateral views (22,33). Once the wire is in place, and its position conﬁrmed ﬂuoroscopically, consideration should be given to placing a second, derotational wire, which can be helpful in more unstable fractures (22,24). We have not found this second, derotation wire to be necessary in most cases. Often, the guide wire on the implant set is of a small caliber and easily bent. As an example, the Acutrak (Acumed, Beaverton, Oregon, U.S.A) mini-sized screw is preferable as it

FIGURE 3 The outlines of the trapezium and scaphoid are drawn on the volar wrist. The guide wire is placed starting at the trapezial edge and advanced in a proximal ulnar and dorsal direction. Source: Courtesy of John T. Capo, MD.

98 & Capo et al. (A)

(B)

FIGURE 4 (A) The lateral ﬂuoroscopic view demonstrates the proper starting point of the guide wire. The edge of the trapezium is traversed to allow access to the center of the distal scaphoid pole. (B) Final guide wire placement in the AP view. The wire starts at the distal radial edge of the scaphoid and is centered in the proximal pole. Abbreviation: AP, anteroposterior. Source: Courtesy of John T. Capo, MD.

removes less bone and creates a smaller starting hole in the scaphoid, but its guide wire is 0.028 inch. This size wire is insufﬁciently rigid to obtain accurate placement and easily bends with even gentle wrist motion. A technique to avoid this is to use a 0.035 inch wire for ideal placement and to use an additional identical length wire for measuring. Alternatively, the new Synthes (Synthes Corp., West Chester, Pennsylvania, U.S.A.) scaphoid screw set has a sufﬁciently large guide wire of 0.045 inch.

After appropriate guide wire placement, a longitudinal incision (approximately 5 mm, just large enough for the depth gauge and screw) is centered on the wire (20). Blunt dissection is then used to obtain access to the distal scaphoid and trapezium. Screw length is determined by using the supplied depth gauge or by an additional wire of identical length to calculate the amount of guide wire buried in the bone. It should be veriﬁed radiographically that the depth gauge or wire is on the distal scaphoid edge and not the trapezium to ensure accurate screw

Percutaneous Fixation of Acute Scaphoid Fractures & 99

FIGURE 5 A second guide wire of equal length is placed on the scaphoid cortical surface to obtain a proper length measurement. If the measuring sleeve is used, it should be ensured to rest at the same location. Source: Courtesy of John T. Capo, MD.

length (Fig. 5). The screw length selected should be 2–4 mm shorter than the wire measurement, depending on the position of the proximal end of the wire. In our hands, the most accurate method is to place the proximal tip of the wire at the scaphoid cortical edge and then subtract 4–5 mm. Hand or power drilling is then done, followed by tapping as needed (based on screw type, bone quality, and presence of

sclerosis). Drilling, tapping, and screw placement are done with ﬂuoroscopic guidance (Fig. 6). The screw is placed over the wire and inserted under ﬂuoroscopic control to ensure maintenance of the reduction (Fig. 7). If any rotation between the proximal and distal fragments is noted, a derotational wire should be placed (33). The ideal screw provides appropriate compression and is countersunk at least 2 mm on either

FIGURE 6 Cannulated drill advancing over the guide wire under ﬂuoroscopic control. The drill has removed the volar edge of the trapezium. Source: Courtesy of John T. Capo, MD.

100 & Capo et al. (A)

(B)

FIGURE 7 (A) Cannulated screw being placed through volar wound. (B) Lateral ﬂuoroscopic view of screw being advanced into scaphoid body. Note that the guide wire has been further advanced out of the proximal pole to avoid loosening with drilling and screw placement. Source: Courtesy of John T. Capo, MD.

end of the scaphoid (5,22). Final screw placement is veriﬁed with imaging to ensure it is countersunk and within the conﬁnes of the scaphoid bone (Fig. 8). If traction is being used, it should be released before ﬁnal screw tightening, allowing for more compression (11). When using a conical screw system (like the Acutrak set), care must be taken not to over-drill the channel in length or insert the screw too far. Due to the conical nature of the screw this may cause screw loosening or fracutre of the scaphoid proximal pole. The wound is irrigated and closed with two to three nylon sutures (Fig. 9). A splint is placed for comfort and active ﬁnger

ROM is allowed immediately. If the fracture was rigidly ﬁxed, then we begin gentle wrist ROM once the wound is stable (usually at the ﬁrst postoperative visit). However, this is controversial. Preferences for postoperative immobilization range from mandatory (24) to optional or unnecessary (20,22,33). In between ROM exercises, patients wear a removable thumb-spica splint (off the shelf or made by an occupational therapist). Patients can return to sedentary work when they feel ready or when their ROM is 75% compared to the contralateral side (20). Manual or athletic work can be resumed at the time of bony union (20). If plain radiographs

Percutaneous Fixation of Acute Scaphoid Fractures & 101 (A)

nonunion, symptomatic hardware, residual pain, superﬁcial radial nerve irritation, and superﬁcial wound infection. Nonunion has been reported at rates ranging from 0% (20–22) to 11% (11,36). Nonunion has been attributed to improper screw placement, proximal pole fractures, and treatment delayed beyond four weeks (11,37). Mild residual pain has been reported from 5% (21) to 29% (37) of patients and associated with ipsilateral distal radius fractures, scaphotrapeziotrapezoid injury, adhesions, and scar sensitivity. Symptomatic hardware has occurred in cases of both headless and headed screws at a rate up to 10% (22,37). Of these cases, 50% were successfully treated with hardware removal (22,37). Transient superﬁcial radial nerve irritation has been reported in 2–6% of cases. Superﬁcial wound infection, occurring in up to 1% of patients, has been effectively managed with oral antibiotics. Wozasek (2001) reported treatment of 146 scaphoid fractures with a percutaneously placed 4.8 mm cannulated, headed screw and detected mild trapezial erosions in one-third of his patients. The majority of these patients had painless, full ROM and no signiﬁcant clinical consequences (11). He also reported one loose screw that required replacement and reﬂex sympathetic dystrophy in two of these 46 patients.

(B)

& OUTCOMES

FIGURE 8 (A) AP and (B) lateral views demonstrating ﬁnal placement of screw. Both proximal and distal aspects of the screw are countersunk well within the bone. Abbreviation: AP, anteroposterior. Source: Courtesy of John T. Capo, MD.

are inconclusive, a computed tomography scan can be obtained to verify bony healing.

& COMPLICATIONS AND THEIR MANAGEMENT Overall, the complication rate for this technique is low. However, the most frequent complications reported include

Percutaneous ﬁxation of scaphoid fractures was ﬁrst introduced in the German literature by Streli in 1970 (38). In 1986, Cosio (39) reported 77% union for percutaneous K-wire treatment of scaphoid nonunions. In 1991, Wozasak (11) reported results of percutaneous ﬁxation, with cannulated 4.8 mm screws, of acute fractures, delayed unions, nonunions, and sclerotic nonunions. Of the 146 acute fractures treated, there was an 84% union at an average of four months. One-third of the nonunions were attributed to technical errors, including screw protrusion through the proximal fragment, threads across the fracture site, and screw length too long to provide adequate compression. Ledoux (40), in the French literature, reported 23 cases, demonstrating 100% union rate and wrist ROM of 95% compared to the contralateral side. In 1998, Haddad (20) published results of 15 patients treated with percutaneous screws. He reported a 100% union rate within two months and ROM and grip strength similar to the opposite side. Return to work averaged four days for sedentary and ﬁve weeks for manual jobs. Brutus (37) reported a retrospective review of 30 patients treated with percutaneously placed Herbert screws and followed for at least six months. His results included a 90% union rate and a return to work at an average of 1.6 months for professional work and 1.8 months for sports. Yip (22) percutaneously treated 49 fractures with cannulated 3.5 mm screws and followed them for an average of four years. There was a 100% union rate at 12 weeks and no infection, AVN, nonunion, or arthrosis. The percutaneous technique has also been directly compared to cast immobilization of non- and minimally displaced fractures and has had favorable results. Adolfsson (3) reviewed 53 patients treated with immobilization in a shortarm thumb-spica cast versus percutaneous Acutrak screw ﬁxation. While rate and time to union were found to be similar, the operative group had signiﬁcantly better ROM at 16 weeks. Inoue (21) compared the outcomes of 39 patients treated with a short-arm thumb-spica cast and 40 treated with a freehand standard Herbert screw placed through a 1 cm incision. This was a retrospective review and the type of treatment was determined by the patients, after informed discussion about each treatment method. The operative group

102 & Capo et al.

FIGURE 9 Three nylon sutures are used to close the skin of the entry site. Source: Courtesy of John T. Capo, MD.

had a signiﬁcantly faster time to union (6 vs. 9.7 weeks) and return to work (5.8 vs. 10 weeks). There was one nonunion in the cast group that was successfully treated with subsequent screw ﬁxation and bone graft. Two patients in the operative group had mild pain, which was thought to be related to ipsilateral distal radius fractures. In a landmark study in 2001, Bond (19) prospectively randomized 25 military personnel with non-displaced scaphoid fractures to cast immobilization or percutaneous screw ﬁxation. The one complication in the ﬁxation group was a distally prominent and symptomatic screw that needed to be removed. There were no complications in the cast immobilization group. The times until union and return to work were signiﬁcantly shorter for the percutaneous ﬁxation group: seven and eight weeks versus 12 and 15 weeks, respectively. However, at two years, there were no signiﬁcant differences in function or satisfaction between groups.

& SUMMARY & General Conclusions Internal ﬁxation has the advantage of providing rigid stabilization that eliminates the need for above-elbow immobilization and permits early ROM. However, open ﬁxation involves larger incisions, soft tissue stripping, and possible vascular compromise. The percutaneous ﬁxation technique for selected scaphoid fracture and nonunions is a safe and effective treatment option, now yielding up to 100% union rates with minimal surgical complications and signiﬁcantly faster return to work and activities of daily living. As surgeon familiarity continues to improve, percutaneous techniques are being used to treat a wider variety of fractures, nonunions, and AVN cases. The data justifying its use are compelling and suggest that percutaneous ﬁxation for non- and minimally displaced scaphoid fractures is an ideal treatment option for a patient who desires early return to function.

injuries. Closed reduction maneuvers, e.g., ulnar deviation, and percutaneously placed K-wires as joysticks can be used to reduce unstable and displaced fractures (5,26,41–43) and reduction can be veriﬁed with arthroscopic assistance (5,43–46). Early nonunions can be treated with screw ﬁxation alone if the cartilaginous shell is intact, there is no collapse, and cystic changes are mild (5). If the nonunions are more advanced with larger cyst formation, these can be debrided with percutaneously placed curettes and then injected with bone graft, followed by percutaneous screw placement (43). Select cases of AVN have also been treated percutaneously by providing “vascularized” bone graft through retrograde reaming (43). Hardware improvement should include larger guide wires which provide more control during guide wire placement and avoid bending. Another implant advance that has recently been introduced is the development of self-drilling screws (Acutrak; Wright Medical Technology, Arlington, Tennessee, USA). These can save time and also allow further advancement of the screw to a more accurate ﬁnal location while minimizing the chance of fracture of the proximal pole. New methods of percutaneously placed grafts would also be beneﬁcial in difﬁcult nonunion cases.

& SUMMATION POINTS

Indications &

& &

Acute minimally displaced scaphoid fracture in a healthy patient requiring early return to work/function or unwilling to accept prolonged closed, cast treatment Scaphoid nonunion with near-anatomic alignment and minimal cystic degeneration Relative: Displaced fractures and nonunions with signiﬁcant cystic changes (only if surgeon is experienced with percutaneous techniques and assistive arthroscopy)

Outcomes & &

& Future Direction

&

Many advances continue to be made in the application and utility of the percutaneous technique for treating scaphoid

& &

Union rates O98% Less/minimally invasive Allows earlier ROM and return to regular activities Lessens immobilization Shorter operative time: (with experience)

work

and

Percutaneous Fixation of Acute Scaphoid Fractures & 103

Complications & & & & &

Residual pain (up to 29%) Nonunion (0–11%) Symptomatic hardware (5–29%) Transient superﬁcial radial nerve irritation (2–6%) Superﬁcial wound infection (up to 1%)

& REFERENCES 1. Chan KW, McAdams TR. Central screw placement in percutaneous screw scaphoid ﬁxation: a cadaveric comparison of proximal and distal techniques. J Hand Surg [Am] 2004; 29(1):74–9. 2. Simonian PT, Trumble TE. Scaphoid nonunion. J Am Acad Orthop Surg 1994; 2(4):185–91. 3. Adolfsson L, Lindau T, Arner M. Acutrak screw ﬁxation versus cast immobilisation for undisplaced scaphoid waist fractures. J Hand Surg [Br] 2001; 26(3):192–5. 4. Duppe H, Johnell O, Lundborg G, Karlsson M, Redlund-Johnell I. Long-term results of fracture of the scaphoid. A follow-up study of more than thirty years. J Bone Joint Surg Am 1994; 76(2):249–52. 5. Slade JF, III, Gutow AP, Geissler WB. Percutaneous internal ﬁxation of scaphoid fractures via an arthroscopically assisted dorsal approach. J Bone Joint Surg Am 2002; 84-A(Suppl. 2):21–36. 6. Bohler L, Trojan E, Jahna H. The results of treatment of 734 fresh, simple fractures of the scaphoid. J Hand Surg [Br] 2003; 28(4):319–31. 7. Cooney WP, Dobyns JH, Linscheid RL. Fractures of the scaphoid: a rational approach to management. Clin Orthop Relat Res 1980; 149:90–7. 8. Dias JJ, Thompson J, Barton NJ, Gregg PJ. Suspected scaphoid fractures. The value of radiographs. J Bone Joint Surg Br 1990; 72(1):98–101. 9. Russe O. Fracture of the carpal navicular. Diagnosis, non-operative treatment, and operative treatment. J Bone Joint Surg Am 1960; 42-A:759–68. 10. Eddeland A, Eiken O, Hellgren E, Ohlsson NM. Fractures of the scaphoid. Scand J Plast Reconstr Surg 1975; 9(3):234–9. 11. Wozasek GE, Moser KD. Percutaneous screw ﬁxation for fractures of the scaphoid. J Bone Joint Surg Br 1991; 73(1):138–42 (Erratum in: J Bone Joint Surg [Br] 1991; 73(3):524). 12. Bunker TD, McNamee PB, Scott TD. The Herbert screw for scaphoid fractures. A multicentre study. J Bone Joint Surg Br 1987; 69(4):631–4. 13. Filan SL, Herbert TJ. Herbert screw ﬁxation of scaphoid fractures. J Bone Joint Surg Br 1996; 78(4):519–29. 14. Herbert TJ, Fisher WE. Management of the fractured scaphoid using a new bone screw. J Bone Joint Surg Br 1984; 66(1):114–23. 15. Herbert TJ, Fisher WE, Leicester AW. The Herbert bone screw: a ten year perspective. J Hand Surg [Br] 1992; 17(4):415–9. 16. O’Brien L, Herbert T. Internal ﬁxation of acute scaphoid fractures: a new approach to treatment. Aust N Z J Surg 1985; 55(4):387–9. 17. Rettig AC, Kollias SC. Internal ﬁxation of acute stable scaphoid fractures in the athlete. Am J Sports Med 1996; 24(2):182–6. 18. Garcia-Elias M, Vall A, Salo JM, Lluch AL. Carpal alignment after different surgical approaches to the scaphoid: a comparative study. J Hand Surg [Am] 1988; 13(4):604–12. 19. Bond CD, Shin AY, McBride MT, Dao KD. Percutaneous screw ﬁxation or cast immobilization for nondisplaced scaphoid fractures. J Bone Joint Surg Am 2001; 83-A(4):483–8. 20. Haddad FS, Goddard NJ. Acute percutaneous scaphoid ﬁxation. A pilot study. J Bone Joint Surg Br 1998; 80(1):95–9. 21. Inoue G, Shionoya K. Herbert screw ﬁxation by limited access for acute fractures of the scaphoid. J Bone Joint Surg Br 1997; 79(3):418–21. 22. Yip HS, Wu WC, Chang RY, So TY. Percutaneous cannulated screw ﬁxation of acute scaphoid waist fracture. J Hand Surg [Br] 2002; 27(1):42–6. 23. Ring D, Jupiter JB, Herndon JH. Acute fractures of the scaphoid. J Am Acad Orthop Surg 2000; 8(4):225–31.

24. Cooney WP, III. Scaphoid fractures: current treatments and techniques. Instr Course Lect 2003; 52:197–208 (Review). 25. Gelberman RH, Wolock BS, Siegel DB. Fractures and non-unions of the carpal scaphoid. J Bone Joint Surg Am 1989; 71(10):1560–5 (Review; no abstract available). 26. Trumble TE, Gilbert M, Murray LW, Smith J, Raﬁjah G, McCallister WV. Displaced scaphoid fractures treated with open reduction and internal ﬁxation with a cannulated screw. J Bone Joint Surg Am 2000; 82(5):633–41. 27. Trumble TE, Salas P, Barthel T, Robert KQ, III. Management of scaphoid nonunions. J Am Acad Orthop Surg 2003; 11(6):380–91 (Erratum in: J Am Acad Orthop Surg 2004; 12(1):33A). 28. Low G, Raby N. Can follow-up radiography for acute scaphoid fracture still be considered a valid investigation? Clin Radiol 2005; 60(10):1106–10. 29. Jorgensen TM, Andresen JH, Thommesen P, Hansen HH. Scanning and radiology of the carpal scaphoid bone. Acta Orthop Scand 1979; 50(6 Pt 1):663–5. 30. King JB, Turnbell TJ. An early method of conﬁrming scaphoid fractures. In proceedings and reports of universities, colleges, councils and associations. J Bone Joint Surg Am 1981; 63-B(2):287. 31. Vichard P, Garbuio P, Lepage D, Tropet Y. Occult fractures of the carpal navicular. Detection by quantitative radioscintigraphy. Social and medico-legal repercussions. Bull Acad Natl Med 2001; 185(8):1399–413 (Discussion 1414–6. Article in French). 32. Dorsay TA, Major NM, Helms CA. Cost-effectiveness of immediate MR imaging versus traditional follow-up for revealing radiographically occult scaphoid fractures. Am J Roentgenol 2001; 177(6):1257–63. 33. Wu WC. Percutaneous cannulated screw ﬁxation of acute scaphoid fractures. Hand Surg 2002; 7(2):271–8. 34. Levitz S, Ring D. Retrograde (volar) scaphoid screw insertion-a quantitative computed tomographic analysis. J Hand Surg [Am] 2005; 30(3):543–8. 35. Trumble TE, Clarke T, Kreder HJ. Non-union of the scaphoid. Treatment with cannulated screws compared with treatment with Herbert screws. J Bone Joint Surg Am 1996; 78(12):1829–37. 36. McCallister WV, Knight J, Kaliappan R, Trumble TE. Central placement of the screw in simulated fractures of the scaphoid waist: a biomechanical study. J Bone Joint Surg Am 2003; 85-A(1):72–7. 37. Brutus JP, Baeten Y, Chahidi N, Kinnen L, Moermans JP, Ledoux P. Percutaneous Herbert screw ﬁxation for fractures of the scaphoid: review of 30 cases. Chir Main 2002; 21(6):350–4. 38. Streli R. Percutaneous screwing of the navicular bone of the hand with a compression drill screw (a new method). Zentralbl Chir 1970; 95(36):1060–78 (Article in German). 39. Cosio MQ, Camp RA. Percutaneous pinning of symptomatic scaphoid nonunions. J Hand Surg [Am] 1986; 11(3):350–5. 40. Ledoux P, Chahidi N, Moermans JP, Kinnen L. Percutaneous Herbert screw osteosynthesis of the scaphoid bone. Acta Orthop Belg 1995; 61(1):43–7 (Article in French). 41. Chen AC, Chao EK, Hung SS, Lee MS, Ueng SW. Percutaneous screw ﬁxation for unstable scaphoid fractures. J Trauma 2005; 59(1):184–7. 42. Jeon IH, Oh CW, Park BC, Ihn JC, Kim PT. Minimal invasive percutaneous Herbert screw ﬁxation in acute unstable scaphoid fracture. Hand Surg 2003; 8(2):213–8. 43. Slade JF, III, Geissler WB, Gutow AP, Merrell GA. Percutaneous internal ﬁxation of selected scaphoid nonunions with an arthroscopically assisted dorsal approach. J Bone Joint Surg Am 2003; 85-A(Suppl. 4):20–32. 44. Shih JT, Lee HM, Hou YT, Tan CM. Results of arthroscopic reduction and percutaneous ﬁxation for acute displaced scaphoid fractures. Arthroscopy 2005; 21(5):620–6. 45. Toh S, Nagao A, Harata S. Severely displaced scaphoid fracture treated by arthroscopic assisted reduction and osteosynthesis. J Orthop Trauma 2000; 14(4):299–302. 46. Whipple TL. Stabilization of the fractured scaphoid under arthroscopic control. Orthop Clin North Am 1995; 26(4):749–54.

14 Percutaneous and Arthroscopic Management of Scaphoid Nonunions William B. Geissler

Department of Orthopedic Surgery and Rehabilitation, University of Mississippi Medical Center, Jackson, Mississippi, U.S.A.

& INTRODUCTION Wrist arthroscopy has revolutionized the practice of orthopedics by providing the technical capability to examine and treat intra-articular abnormalities of the wrist joint (1). Wrist arthroscopy allows for direct visualization and palpation of cartilage surfaces, synovial tissue, and the interosseous ligaments under bright light and magniﬁed conditions. The scaphoid is well visualized from both the radiocarpal and midcarpal spaces. Fractures of the scaphoid are best visualized with the arthroscope in the midcarpal space (Fig. 1). This allows for arthroscopic assisted ﬁxation of fractures of the scaphoid and nonunions under direct visualization. The scaphoid is the most frequently fractured carpal bone and accounts for approximately 70% of all carpal fractures (2). This injury typically occurs in young adult males between the ages of 15 and 30 years (3). Scaphoid fracture is also a common athletic injury particularly in football and basketball where aggressive play frequently causes impact injuries to the wrist (4). It is estimated that approximately 1 out of 100 college football players will sustain a fracture of the scaphoid (4). Acute nondisplaced fractures of the scaphoid have traditionally been managed with cast immobilization (5,6). Nondisplaced scaphoid fractures have been reported to heal in 8 to 12 weeks when immobilized in long- and short-arm thumb spica casts (5,6). However, the reported rate of nonunion for such fractures has been as high as 15% (5–7). The duration of cast immobilization also varies dramatically according to the fracture site. A fracture of the scaphoid tubercle may be healed within a period of six weeks, while a fracture of the waist of the scaphoid may take three months or more of immobilization. Fractures of the proximal third of the scaphoid may take six months or longer to heal with a cast due to the distal vascularity of the scaphoid (8). Although cast immobilization may be successful in up to 90% of cases, it must be asked at what cost to the patient, who may not be able to tolerate a lengthy course of immobilization (9). Prolonged immobilization may lead to muscle atrophy, disuse osteopenia, possible joint contracture, and ﬁnancial hardship (7). An athlete or worker may be inactive for six months or longer as the fracture unites. This may result in a loss of athletic scholarship or employment. Displaced fractures have a reported nonunion rate of approximately 50% (3). Factors that decrease the prognosis for healing include displacement, the presence of associated carpal instability, and delayed presentation greater than four to six weeks (2). Traditionally, acute displaced fractures of the scaphoid and scaphoid nonunions have been managed by open reduction and internal ﬁxation (2,3,10–17). This requires signiﬁcant soft tissue dissection. Complications have been

reported with the most common complication seen as hypertropic scar in one series (2,3). Other potential complications include avascular necrosis, carpal instability, donor site pain (bone graft), infection, screw protrusion, and reﬂex sympathetic dystrophy (15,18). Jigs have been designed to assist in fracture reduction, but are often difﬁcult to apply requiring even further extensive surgical dissection (19). There are several factors that make healing of the scaphoid difﬁcult (20), if not prolonged. Scaphoid fractures unite by primary bone healing without external callus. The scaphoid is almost entirely covered with articular cartilage. This limits the amount of surface area for bone contact and consolidation. The potential for synovial ﬂuid to pass between the fracture fragments may also occur due to its intra-articular environment. The scaphoid receives its primary blood supply from the radial artery and branches of the anterior interosseous artery (8). The most important vascular supply enters along the dorsal ridge of the scaphoid. These vessels are responsible for the majority of perfusion of the proximal two-thirds of the scaphoid. This blood supply is quite tenuous and can be easily disrupted as the majority of scaphoid fractures (80%) occur at the waist area or mid portion of the scaphoid (21). The disruption of blood supply affects bone consolidation, and the time until union. Because of the retrograde circulation, more proximal fractures of the scaphoid require greater time until union. Approximately one-third of fractures of the waist of the scaphoid and virtually all proximal one-ﬁfth fractures develop osteonecrosis (8).

& INDICATIONS Arthroscopic or percutaneous assisted ﬁxation of scaphoid fractures offers a middle ground between the traditional treatment of cast immobilization for nondisplaced fractures and open reduction for displaced fractures of the scaphoid (22–30). The application of arthroscopic wrist techniques to scaphoid fracture management offers many advantages over conventional techniques. These techniques reduce surgical exposure and minimize soft tissue dissection, which may cause potential loss of vascularity to the fracture fragments. These techniques avoid the division of the important radioscaphoid capitate ligament and the volar capsule, which requires subsequent repair and healing (18). In addition, arthroscopic assisted ﬁxation avoids potential scar formation and allows for detection and management of any associated intercarpal soft tissue injuries, which may occur with a fracture of the scaphoid. Recent advances in arthroscopic assisted and percutaneous ﬁxation of scaphoid fractures allow the majority of acute fractures of the scaphoid to be managed by these modalities.

106 & Geissler TABLE 1 Scaphoid Nonunion Classiﬁcation Slade and Geissler Type I Type II Type III Type IV Type V Type VI

Delayed presentation 4 to 12 weeks Fibrous union, minimal fracture line Minimal sclerosis !1 mm Cystic formation, between 1 and 5 mm Humpback deformity, O5 mm cystic change Wrist arthrosis

Source: From Ref. 35.

FIGURE 1 Fractures of the scaphoid are best seen from the midcarpal space. Fractures of the waist of the scaphoid are best observed with the arthroscope in the radial midcarpal portal. Fractures of the proximal pole are ideally visualized with the arthroscope in the ulnar midcarpal portal as seen here.

As surgeons gain more experience with these techniques, several authors now have reported their experience with arthroscopic and percutaneous management of nonunions of the scaphoid (1,22–25,27,28,30–32). The purpose of this chapter is to review the indications of surgical techniques for arthroscopic and percutaneous management of nonunions of the scaphoid. These techniques are particularly applicable to the young active population in which scaphoid fractures are most commonly seen and in particular, this group is least likely to tolerate prolonged periods of immobilization (33,34).

& PREOPERATIVE EVALUATION Posteroanterior (PA) and lateral radiographs are mandatory to assess displacement, alignment, and angulation of a scaphoid fracture. In addition, semi-pronated and semi-supinated views are helpful to demonstrate the proximal and distal pole of the scaphoid respectively. A posterior anterior radiograph with the wrist in ulnar deviation extends the scaphoid for detection of displacement. It is well recognized that a nondisplaced fracture may not be apparent on the initial radiographs for several weeks. It is important to immobilize the patient who presents with snuffbox tenderness until the pain resolves, or until a diagnosis is conﬁrmed radiographically. Frequently, athletes simply choose to ignore the initial pain and discomfort with an acute scaphoid fracture and appear after the season has ended with a deﬁned nonunion of the scaphoid (30,33). Computer tomography (CT) parallel to the longitudinal axis of the scaphoid is used to evaluate displacement, angulation, and healing when further information is required to assess the scaphoid fracture. In this technique, the patient is placed prone with the arms extended overhead, and with the wrist radial deviated to obtain the longitudinal axis of the scaphoid. Coronal slices are performed with supination of the forearm to a neutral position. Percutaneous and arthroscopic reduction of scaphoid fracture is indicated in patients without a humpback deformity. If a humpback deformity or rotation of the lunate is

demonstrated by plain radiographs, or by CT scan, open reduction and bone grafting is indicated. Recently, Slade and Geissler published their radiographic classiﬁcation of scaphoid nonunions (Table 1) (29). Type I fractures are the result of delayed presentation, i.e., 4 to 12 weeks from injury. A delayed presentation is well known to be a risk factor for nonunion of the scaphoid. In Type II injuries, a ﬁbrous union is present. A minimal fracture line is seen on the plane radiographs. The lunate is neutral and there is no humpback deformity. In Type III injuries, minimal sclerosis is seen at the fracture site. The sclerosis is less than 1 mm in length. Again, the lunate is not rotated, and no humpback deformity is seen on imaging studies. In Type IV injuries, cystic formation has now occurred. The area of cyst formation is between 1 and 5 mm. In Type IV injuries, there is no humpback deformity of the scaphoid, and no rotation of the lunate as seen on plane radiographs. In Type V injuries, cystic changes are now greater than 5 mm. A humpback deformity may be seen either on plane imaging studies or CT evaluation. The lunate has rotated into a dorsal intercalated segment instability (DISI) position. Percutaneous and arthroscopic techniques for scaphoid nonunions are not indicated in Type V injuries. In Type VI injuries, a longstanding nonunion of the scaphoid is present. Secondary degenerative changes, scaphoid nonunion advanced collapse (SNAC), are seen with spurring along the radial border of the scaphoid and peaking of the radial styloid. Again, percutaneous and arthroscopic reduction techniques are not indicated in Type VI injuries. Fixation of the scaphoid nonunion may still be possible with removal of the bone spurs and radial styloidectomy. In advanced cases, salvage procedures such as proximal carpectomy or four-corner fusion may be indicated.

& SURGICAL TECHNIQUES Various arthroscopic assisted and percutaneous techniques for fractures of the scaphoid have been described in the literature (22–28,30,32,36). These include the volar approach (popularized by Haddad) and the dorsal approach (more recently popularized by Slade) (25,27,28). In general, these techniques include the use of a small amount of wrist arthroscopy and a signiﬁcant amount of ﬂuoroscopy. As described previously, ﬁbrous nonunions of the scaphoid and cystic scaphoid nonunions without humpback deformity and rotation of the lunate are amendable to these techniques. Signiﬁcantly displaced fractures with marked DISI rotation of the lunate particularly in a chronic situation are best managed by open reduction and internal ﬁxation (2,3,37).

& Volar Percutaneous Approach The percutaneous volar approach was popularized by Haddad and Goddard (25). Utilizing this technique, the patient is placed

Percutaneous and Arthroscopic Management of Scaphoid Nonunions & 107

supine and the thumb is suspended in a Chinese ﬁnger trap while the patient is under general anesthetic or regional anesthesia. Placement of the thumb in suspension causes ulnar deviation of the wrist, which improves access to the distal pole of the scaphoid. Under ﬂuoroscopic control, a longitudinal 0.5 cm incision is made at the most distal radial aspect of the scaphoid. Blunt dissection is used to expose the distal pole of the scaphoid. A percutaneous guide wire is introduced into the scaphotrapezial joint and advanced proximally and dorsally across the fracture site. The position of the guide wire is checked under ﬂuoroscopy in the anterior/ posterior, oblique, and lateral planes. The length of the guide wire within the scaphoid is determined with a depth gauge and a drill is inserted through a soft tissue protector to protect the surrounding tissues. A headless cannulated screw is placed over the guide wire after drilling. A second guide wire is helpful to protect against rotation of the fracture fragments while the screw is being inserted. More recently, self-drilling and selftapping headless cannulated screws have been introduced (Acumed, Beaverton, Oregon, U.S.A.). Skin closure requires the use of a single suture and the patient is encouraged to begin active ﬁnger ﬂexion exercises before discharge. Haddad and Goddard report their initial results in a pilot study of 15 patients with acute fractures of the scaphoid (25). Unions were achieved in all patients in 57 days (range 38–71 days). The range of motion after the union was equal to that of the contralateral limb and grip strength averaged 90% of the contralateral limb at three months. Patients were able to return to sedentary work within four days and manual work within ﬁve weeks.

& Dorsal Percutaneous Approach Slade has described the dorsal percutaneous approach with ﬁxation of stable, unstable acute fractures of the scaphoid and selected nonunions (27–29). This technique has become popular because of its simplicity and because it allows for further arthroscopic evaluation and reduction of the fracture. The patient is placed supine on the table with the arm extended. It is helpful to place several towels under the elbow to support the forearm so that it is parallel to the ﬂoor. The wrist is ﬂexed and pronated under ﬂuoroscopy until the proximal and distal poles of the scaphoid are aligned to form a perfect cylinder. Continuous ﬂuoroscopy is useful as the wrist is ﬂexed to obtain the true ring sign. A 14-guage needle with a needle driver is then used as a drill guide for a 0.045 guide wire. Under ﬂuoroscopy, the needle is placed in the center of the ring and is parallel to the beam of the ﬂuoroscopy unit. The guide wire is then driven across the central axis of the scaphoid from dorsal to volar until the distal end is in contact with the scaphoid cortex. The position of the guide wire is then evaluated under ﬂuoroscopy in the PA, oblique, and lateral planes while maintaining the wrist in ﬂexion. The wrist cannot be extended at this point; otherwise the guide wire may be bent. A second guide wire is then placed parallel to the ﬁrst so that its tip touches the proximal pole of the scaphoid cortex. The difference between the lengths of the two guide wires is the resulting length of the scaphoid. The tendency with these percutaneous techniques is to insert a screw that is too long. A screw that is too long may potentially distract the fracture site, or can violate the joint surface causing articular damage either to the scaphotrapezial joint or radiocarpal joint. Therefore, it is important to subtract at least 4 mm from the measurement between the guide wires, which provides the ideal length of the screw. In this way, the screw may be placed fully buried in the bone to avoid damage

to the articular surface. In fractures that involve the proximal third of the scaphoid, more than 4 mm from the measurement between the guide wires may be subtracted because it is not essential to have the screw ﬁll the entire length of the scaphoid. The primary guide wire is then advanced volarly through the trapezium along the radial side of the thumb metacarpal and exits the skin after the screw length has been selected. The guide wire is advanced volarly until its proximal end is ﬂushed with the proximal pole of the scaphoid. Now the wrist may be extended without damage to the guide wire. The wrist is then suspended in a traction tower and the wrist can be evaluated arthroscopically. Fractures of the waist of the scaphoid are best seen with the arthroscope in the radial midcarpal portal. Fractures of the proximal pole of the scaphoid are best seen with the arthroscope in the ulnar midcarpal portal. The reduction of the scaphoid nonunion may be viewed directly arthroscopically. If the reduction is not satisfactory, the guide wire may be advanced volarly across the fracture site but still within the distal pole of the scaphoid. Kirschner wire or joysticks may be placed in the dorsum of the proximal and distal ends of the scaphoid fracture fragments. These joysticks are then used to further reduce the fracture anatomically as viewed directly arthroscopically with the arthroscope in the midcarpal portal. Once the reduction is felt satisfactory, the guide wire is then advanced back proximally from volar to dorsal into the proximal pole fragment of the scaphoid. The wrist is then ﬂexed, and the guide wire is advanced back dorsally so that it protrudes from the skin. A portion of the guide wire is left protruding from the volar aspect of the hand as well, so that the guide wire breaks or bends and can be easily removed from either the volar or dorsal aspect of the hand. A small incision is then made over the dorsum of the guide wire and blunt dissection is carried down to the level of the joint capsule. The guide pin may be evaluated so that it is not impaling any of the dorsal extensor tendons to the hand or sensory nerve branches. With the wrist in ﬂexion, the scaphoid is then reamed through a soft tissue protector. A secondary guide wire helps prevent rotation of the fracture fragments during reaming of the scaphoid and screw insertion. A headless cannulated screw is then inserted over the guide wire to the depth previously reamed. It is important not to advance the screw to the far cortex unless this has been reamed because this may cause distraction of the fracture fragments. The position of the screw is then checked under ﬂuoroscopy to conﬁrm its central location within the scaphoid and the guide wires are removed. It is important to re-evaluate the position of the screw and the proximal pole of the scaphoid arthroscopically following insertion. Under ﬂuoroscopy, it may appear that the screw is well within the scaphoid. However, it potentially may still be protruding and arthroscopic evaluation is extremely helpful to insure that the screw is within the scaphoid. If the screw protrudes proximally it can potentially injure the articular cartilage of the scaphoid facet of the distal radius. The wrist is suspended again in the traction tower and the arthroscope is placed in the 3–4 portal to assess the position of the screw within the scaphoid. Following conﬁrmation of the screw placement, the small dorsal incision may be closed with a single nylon stitch.

& Dorsal Percutaneous Approach with Arthroscopic Conﬁrmation of Starting Point (Geissler) Most recently, Geissler described his arthroscopic technique for reduction of acute scaphoid fractures and scaphoid nonunions with cystic changes (Fig. 2) (38). In this technique, the wrist is initially suspended in an ARC (Hillsboro, Oregon, U.S.A.)

108 & Geissler

FIGURE 2 Posteroanterior radiograph of a cystic scaphoid nonunion in a 22-year-old male.

traction tower (Fig. 3). The arthroscope is initially placed in the 3–4 portal to evaluate any associated soft tissue lesions, which may occur with a scaphoid fracture. Upon evaluation and treatment of any associated soft tissue injuries, the arthroscope is then transferred to the 6-R portal (Figs. 4–6). The wrist is ﬂexed to approximately 308 in the traction tower. A 14 guage needle is then inserted through the 3–4 portal and the scapho-

FIGURE 4 The arthroscope is placed in the 6-R portal, and a probe is utilized to identify the junction of the scapholunate interosseous ligament to the scaphoid.

lunate interosseous ligament (SLIO ligament) is palpated at the junction of the scaphoid. The junction of the SLIO ligament insertion onto the dorsal, middle third of the scaphoid is the ideal insertion point for a screw. The 14-guage needle is then advanced and impaled into the scaphoid right at the junction of the SLIO ligament onto the dorsal middle third of the scaphoid (Figs. 7 and 8).

FIGURE 3 The wrist is suspended in the ARC traction tower. The suspension bar, off to the side, does not block ﬂuoroscopic visualization of the wrist.

FIGURE 5 Arthroscopic view of the scapholunate interval as seen with the arthroscope in the 6-R portal.

Percutaneous and Arthroscopic Management of Scaphoid Nonunions & 109

FIGURE 6 Arthroscopic view with the arthroscope in the 6-R portal and a probe being placed in the 3–4 portal probing the junction of the scapholunate interosseous ligament to the scaphoid.

The traction tower is then ﬂexed, and the starting point of the needle is evaluated under ﬂuoroscopy (Fig. 9). Utilizing his technique, the starting point is always right at the most proximal pole of the scaphoid. The needle is then simply aimed toward the thumb and a guide wire is then placed through the needle down the central axis of the scaphoid to abut the distal pole (Figs. 10–12). The position of the guide wire is then evaluated on the PA, oblique, and lateral planes under ﬂuoroscopy (Fig. 13). This is done by rotating the forearm in the traction tower, as the ﬂuoroscopy beam is not hindered by the tower. A second guide wire is then placed against the proximal pole of the scaphoid, and the difference in length is measured between the guide wires to give the length of the scaphoid screw. Just as Slade has recommended, a screw at least 4 mm shorter is utilized. Reduction of the scaphoid is then evaluated with the arthroscope in the radial and possibly ulnar midcarpal portal. If the reduction is satisfactory, the guide wire is then advanced out the volar aspect of the wrist. The advantage of this technique is the wrist is not hyperﬂexed as compared to the percutaneous dorsal technique. Thus the fracture site is not potentially ﬂexed to produce a humpback deformity.

FIGURE 7 A 14-guage needle impales the middle third of the scaphoid at the junction of the scapholunate interosseous ligament on the scaphoid after it has been identiﬁed with the probe.

FIGURE 8 The proximal pole of the scaphoid is then impaled with a 14-guage needle at the junction of the scapholunate interosseous ligament on the scaphoid.

In addition, the insertion point of the guide wire into the scaphoid is precisely identiﬁed arthroscopically. The scaphoid is then reamed over the guide wire with a secondary Kirschner wire to protect rotation in a standard fashion (Fig. 14). A headless cannulated screw is then inserted

FIGURE 9 Fluoroscopic view conﬁrming the ideal starting point for the guide wire on the proximal pole of the scaphoid. The ideal starting point has now been conﬁrmed by direct visualization arthroscopically and ﬂuoroscopically.

110 & Geissler

FIGURE 12 The wrist may then be supinated in the ARC traction tower and the position of the guide wire conﬁrmed on the oblique and lateral planes.

to insure that it is not protruding and potentially causing damage to the articular cartilage of the scaphoid facet of the radius.

& OUTCOMES

FIGURE 10 The ARC traction tower is then ﬂexed down and the needle is aimed toward the thumb.

over the guide wire. The position of the screw within the scaphoid is checked under ﬂuoroscopy in the PA, lateral, and oblique planes while the wrist is still in the tower. Following screw placement, the position of the screw within the scaphoid is evaluated arthroscopically with the arthroscope in the 3–4 portal

FIGURE 11 A guide wire is then placed with a headless cannulated screw down the long axis of the scaphoid and conﬁrmed ﬂuoroscopically.

Geissler and Slade described utilizing the dorsal percutaneous ﬁxation technique in 15 patients with stable ﬁbrous nonunions of the scaphoid (39). In their series, there were 12 horizontal oblique fractures, one transverse fracture, and two proximal pole fractures. Fourteen of the ﬁfteen patients were male and relatively young. The average presentation time to the clinic following injury was eight months. All patients underwent percutaneous dorsal ﬁxation with a headless cannulated screw. No patients had an accessory bone grafting procedure. In their series, all fractures healed at an average of three months. Of the 15 patients, eight patients underwent CT evaluation, which further documented healing. The patients had excellent range of motion as a result of minimal surgical dissection. Utilizing the modiﬁed Mayo wrist scale, 12 of the

FIGURE 13 Fluoroscopic image in the oblique view conﬁrming the ideal location of the guide pin down the mid axis of the scaphoid.

Percutaneous and Arthroscopic Management of Scaphoid Nonunions & 111

FIGURE 14 The scaphoid is then reamed through a soft tissue protector over the guide wire.

FIGURE 16 The demineralized bone matrix putty is initially loaded into a syringe, which then is used to inject the putty down the Jamshidi needle.

15 patients had excellent results. Dorsal percutaneous ﬁxation was recommended for those patients with a stable ﬁbrous nonunion without any signs of humpback deformity and without extensive sclerosis at the fracture site. Utilizing the scaphoid nonunion classiﬁcation scheme as proposed by Slade and Geissler, patients with Type II and Type III scaphoid nonunions were included in the study. Most recently, Geissler described his technique of arthroscopic reduction of cystic scaphoid nonunions without humpback deformity (38). Utilizing the scaphoid nonunion classiﬁcation scheme of Slade and Geissler, his series was composed of Type IV scaphoid nonunions. In Geissler’s technique, a guide wire is again placed arthroscopically as previously described with the arthroscope in the 6-R portal and the guide wire is placed through a 14-guage needle to the 3–4 portal. The scaphoid is then reamed with a soft tissue protector once conﬁrmation of ideal placement of the guide wire is noted under ﬂuoroscopy in the PA, oblique, and lateral planes. The guide wire is then advanced out volarly but still being maintained in the distal pole of the scaphoid. The nonunion site may be percutaneously curetted under

ﬂuoroscopy through the drill hole in the proximal pole of the scaphoid. One cubic centimeter of demineralized bone matrix (DBM; Accell, IsoTis, Irvine, California) is then injected percutaneously into the nonunion site of the scaphoid. This may be done several different ways. A customized putty pusher was designed to inject the putty directly into the nonunion site. If this is not available, a Jamshidi needle is usually readily available in most operating rooms (Fig. 15). The demineralized bone matrix is injected into the bone biopsy needle, which is then inserted into the drill hole of the scaphoid, and the plunger is used to push the putty directly into the nonunion site (Figs. 16–18). Lastly, the

FIGURE 15 Demineralized bone matrix will be injected down the mid axis of the scaphoid after it has been reamed through a Jamshidi needle with the plunger.

FIGURE 17 The Jamshidi needle is then placed over the guide wire down the mid axis of the scaphoid into the nonunion site.

112 & Geissler

FIGURE 18 The guide wire is then advanced distally out of the nonunion site while still maintaining its position in the distal pole of the scaphoid. The putty is then injected into the nonunion site of the scaphoid.

demineralized bone matrix may be injected into a standard syringe. A 14-guage needle or angio cath may then be placed into the drill hole of the scaphoid, and the putty again injected into the nonunion site. Once the demineralized bone matrix putty has been injected into the scaphoid nonunion, the guide wire is then advanced back dorsally and exited the skin. A headless cannulated screw is then placed over the guide wire and inserted into the scaphoid (Figs. 19–23). Arthroscopic evaluation of the wrist is then performed in both the midcarpal and radiocarpal spaces to evaluate reduction of the scaphoid nonunion, and to evaluate for any extravasation of demineralized bone matrix putty into the joint. Geissler reported his results in 15 patients with cystic scaphoid nonunions (38). Fourteen of the 15 patients healed their cystic scaphoid nonunions utilizing his technique. Arthroscopic evaluation of the wrist both in the radiocarpal and

FIGURE 19 The guide wire is then advanced proximally through the Jamshidi needle after the demineralized bone matrix putty has been injected. An Acutrak headless cannulated screw is then placed over the guide wire and advanced into the scaphoid.

FIGURE 20 The position of the headless cannulated screw may then be checked while maintaining traction in the ARC traction tower.

midcarpal spaces showed no extravasation of the demineralized bone matrix putty into the joint. DBM is allograft bone that has been demineralized. The bone morphogenetic proteins (BMPs) are preserved following the demineralization process. The entire cascade of bone morphogenetic proteins evokes conversion of the mesenchymal

FIGURE 21 The position of the headless cannulated screw is then viewed ﬂuoroscopically.

Percutaneous and Arthroscopic Management of Scaphoid Nonunions & 113

FIGURE 22 Once ideal placement of the screw has been conﬁrmed ﬂuoroscopically, the screwdriver is removed. Notice how the cystic area of the scaphoid has ﬁlled with the demineralized bone matrix putty.

cell to the preosteoblast and eventually to the osteoblast, which is involved in bone formation. DBM is available in two forms, dry or injectable. DBM is mixed with a carrier for the injectable form. Carriers include hyaluronic acid, collagen, glycerol, gelatin and the actual derivatives of DBM itself. Commercial providers may mix the DBM and carriers in different combinations and proportions. Products with higher DBM content may be considered more effective because of the active ingredient in BMP is contained within the DBM itself, and not within the carrier. Carriers such as hyaluronic acid, collagen, and glycerol are inert and do not induce bone formation. One way to understand the various DBM putties is to imagine them as a chocolate chip cookie. The cookie itself is inert and acts as a carrier for the sweet chocolate chips (BMPs). The more chocolate chips (BMP) in the cookie, the sweeter or better the cookie is perceived. Analogously, DBM putties with a higher BMP content may be considered more effective. Second generation DBM putties have a higher content of BMPs. It is important that the surgeon understands the differences between the various commercial products available. In this way, the surgeon may pick a DBM putty with a high content of BMPs. In Geissler’s study, a product that was 100% osteoinductive was utilized in that the carrier itself was DBM and has been shown to induce bone formation. This may be especially valuable in

FIGURE 23 Oblique view of the scaphoid conﬁrming ideal location of the headless cannulated screw.

fractures where only a small amount of DBM putty may be injected, such as the scaphoid (Figs. 24–28).

& SUMMARY Fractures of the scaphoid are a common carpal injury. This fracture generally occurs in young males, and is a common athletic injury. Most fractures of the scaphoid will heal with cast immobilization. However, approximately 10% to 15% of scaphoid fractures will proceed to nonunion. Arthroscopic and percutaneous ﬁxation of scaphoid nonunions is not indicated in all cases. However, it is particularly useful in Type II, Type III, and Type IV scaphoid nonunions as described by Slade and Geissler (29). In patients with a ﬁbrous nonunion, potentially stabilization alone is all that is necessary to promote healing (39). In cystic changes and in patients with cystic scaphoid nonunions, Geissler has shown good success with arthroscopic stabilization and percutaneous injection of DBM putty into the nonunion site (38).

114 & Geissler

FIGURE 24 Posteroanterior radiograph of an 18-year old male who underwent previous open reduction and internal ﬁxation of a scaphoid fracture with distal radius bone graft at another institution. Despite open reduction with open bone grafting, the scaphoid had not healed.

FIGURE 26 The wrist is suspended in the ARC traction tower and a guide wire was placed arthroscopically via the technique of Geissler down the mid axis of the scaphoid. The scaphoid was reamed and 1cc of Accell demineralized bone matrix (IsoTis) was injected into the nonunion site.

Percutaneous and arthroscopic reduction allows for stabilization with minimal soft tissue stripping, which results in improved range of motion in these patients (38,39). Arthroscopic reduction of scaphoid nonunions as described by Geissler, allows for precise placement of the screw within the scaphoid (38). It limits the guesswork in locating the starting point of the screw with percutaneous ﬂuoroscopic-type techniques. In addition, the wrist does not need to be hyperﬂexed, which potentially may ﬂex the fracture fragments into a humpback deformity. The dorsal placement of the screw allows for central placement and compression over the scaphoid nonunion (40). It is important to remember that these percutaneous and arthroscopic stabilization techniques are indicated for fractures of the scaphoid that do not present with a severe humpback deformity, DISI rotation of the lunate, or advanced arthrosis of the radiocarpal joint.

& SUMMATION POINTS

FIGURE 25 The previous screw is then removed percutaneously.

Indications & &

Relatively early scaphoid nonunions (Stage I–III) without humpback deformity or lunate rotation More severe nonunion with more extensive cystic changes (Type IV) may be treated with screw ﬁxation combined with percutaneous DBM placement

Outcomes & & & &

High Union rates (14 of 15 patients healed in Geissler’s series) Less/minimally invasive Allows earlier range of motion and return to work and activities of daily living Lessens immobilization

FIGURE 27 Fluoroscopic view showing placement of the headless cannulated screw.

Percutaneous and Arthroscopic Management of Scaphoid Nonunions & 115

FIGURE 28 nonunion.

Oblique radiograph conﬁrming healing of the scaphoid

Complications & & &

Nonunion Symptomatic hardware if screw left too long Superﬁcial wound infection

& REFERENCES 1. Whipple TL. The role of arthroscopy in the treatment of intraarticular wrist fractures. Hand Clin 1995; 11:13–8. 2. Gelberman RH, Wolock BS, Siegel DB. Current concepts review: fractures and nonunions of the carpal scaphoid. J Bone Joint Surg 1989; 71A:1560–5. 3. Cooney WP, Dobyns JH, Linscheid RL. Fractures of the scaphoid: a rational approach to management. Clin Orthop 1980; 149:90–7. 4. Rettig AC, Ryan RO, Stone JA. Epidemiology of hand injuries in sports. In: Strickland JW, Rettig AC, eds. Hand Injuries in Athletes. Philadelphia, PA: WB Saunders, 1992:37–48. 5. Gellman H, Caputo RJ, Carter V, et al. Comparison of short and long thumb spica casts for non-displaced fractures of the carpal scaphoid. J Bone Joint Surg 1989; 71A:354–7. 6. Kaneshiro SA, Failla JM, Tashman S. Scaphoid fracture displacement with forearm rotation in a short arm thumb spica cast. J Hand Surg 1989; 71:354–7. 7. Skirven T, Trope J. Complications of immobilization. Hand Clin 1994; 10:53–61. 8. Gelberman RH, Menon J. The vascularity of the scaphoid bone. J Hand Surg 1980; 5:508–13. 9. Rettig AC, Weidenbener EJ, Gloyeske R. Alternative management of mid-third scaphoid fractures in the athlete. Am J Sports Med 1994; 22:711–4. 10. DeMaagd RL, Engber WD. Retrograde Herbert screw ﬁxation for treatment of proximal pole scaphoid nonunions. J Hand Surg 1989; 14:996–1003. 11. Filan SL, Herbert TJ. Herbert screw ﬁxation of scaphoid fractures. J Bone Joint Surg 1996; 78:519–29. 12. Herbert TJ, Fisher WE. Management of the fractured scaphoid using a new bone screw. J Bone Joint Surg 1984; 66:114–23. 13. O’Brien L, Herbert TJ. Internal ﬁxation of acute scaphoid fractures: a new approach to treatment. Aust NZ J Surg 1985; 55:387–9. 14. Rettig ME, Raskin KB. Retrograde compression screw ﬁxation of acute proximal pole scaphoid fractures. J Hand Surg 1999; 24:1206–10.

15. Russe O. Fracture of the carpal navicular: diagnosis, nonoperative treatment and operative treatment. J Bone Joint Surg 1960; 42A:759. 16. Toby EB, Butler TE, McCormack TJ, et al. A comparison of ﬁxation screws for the scaphoid during application of cyclic bending loads. J Bone Joint Surg 1997; 79:1190–7. 17. Trumble TE, Clarke T, Kreder HJ. Nonunion of the scaphoid: treatment with cannulated screws compared with treatment with Herbert screws. J Bone Joint Surg 1996; 78:1829–37. 18. Garcia-Elias M, Vall A, Salo JM, et al. Carpal alignment after different surgical approaches to the scaphoid: a comparative study. J Hand Surg 1988; 13:604–12. 19. Adams BD, Blair WF, Regan DS, et al. Technical factors related to Herbert screw ﬁxation. J Bone Joint Surg 1988; 13:893–9. 20. Smith DK, Cooney WP, An KN, et al. The effects of simulated unstable scaphoid fractures on carpal motion. J Hand Surg 1989; 14:283–91. 21. Botte MJ, Mortensen WW, Gelberman RH, et al. Internal vascularity of the scaphoid in cadavers after insertion of the Herbert screw. J Hand Surg 1988; 13:216–20. 22. Cosio MQ, Camp RA. Percutaneous pinning of symptomatic scaphoid nonunions. J Hand Surg 1986; 11:350–5. 23. Geissler WB. Arthroscopic assisted ﬁxation of fractures of the scaphoid. Atlas Hand Clin 2003; 8:37–56. 24. Geissler WB, Hammit MD. Arthroscopic aided ﬁxation of scaphoid fractures. Hand Clin 2001; 17:575–88. 25. Haddad FS, Goddard NJ. Acute percutaneous scaphoid ﬁxation: a pilot study. J Bone Joint Surg 1998; 80:95–9. 26. Shin A, Bond A, McBride M, et al. Acute screw ﬁxation versus cast immobilization for stable scaphoid fractures: a prospective randomized study. Presented at American Society Surgery for the Hand, Seattle, October 5–7, 2000. 27. Slade JF, III, Grauer JN, Mahoney JD. Arthroscopic reduction and percutaneous ﬁxation of scaphoid fractures with a novel dorsal technique. Orthop Clin North Am 2000; 30:247–61. 28. Slade JF, III, Jaskwhich J. Percutaneous ﬁxation of scaphoid fractures. Hand Clin 2001; 17:553–74. 29. Slade JF, Merrell GA, Geissler WB. Fixation of acute and selected nonunion scaphoid fractures. In: Geissler WB, ed. Wrist Arthroscopy. New York: Springer, 2005:112–24. 30. Taras JS, Sweet S, Shum W, et al. Percutaneous and arthroscopic screw ﬁxation of scaphoid fractures in the athlete. Hand Clin 1999; 15:467–73. 31. Slade JF, III, Grauer JN. Dorsal percutaneous repair of scaphoid fractures with arthroscopic guidance. Atlas Hand Clin 2001; 6:307–23. 32. Wozasek GE, Moser KD. Percutaneous screw ﬁxation of fractures of the scaphoid. J Bone Joint Surg 1991; 73:138–42. 33. Geissler WB. Carpal fractures in athletes. Clin Sports Med 2001; 20:167–88. 34. Rettig AC, Kollias SC. Internal ﬁxation of acute stable scaphoid fractures in the athlete. Am J Sports Med 1996; 24:182–6. 35. Geissler WB. Wrist Arthroscopy. New York: Springer, 2004. 36. Kamineni S, Lavy CBD. Percutaneous ﬁxation of scaphoid fractures: an anatomic study. J Hand Surg 1999; 24:85–8. 37. Fernandez DL. Anterior bone grafting and conventional lag screw ﬁxation to treat scaphoid nonunions. J Hand Surg 1990; 15A:140–7. 38. Geissler WB. Arthroscopic ﬁxation of cystic scaphoid nonunions with DBM. Presented American Association Hand Surgery, Tucson, AZ, January 2006. 39. Geissler WB, Slade JF. Arthroscopic ﬁxation of scaphoid nonunions without bone grafting. Presented American Society for Surgery of the Hand, Phoenix, AZ, September 2002. 40. McCallister W, Knight J, Kaliappan R, Trumble T. Does central placement in the proximal pole of the scaphoid offer biomechanical advantage in the internal ﬁxation of acute fractures of the scaphoid waist? ASSH Meeting, Baltimore, October 2001.

15 Reduction and Association of the Scaphoid and Lunate (RASL) Reconstruction for Scapholunate Instability Steven H. Goldberg, Charles M. Jobin, and Melvin P. Rosenwasser

Department of Orthopedic Surgery, Columbia University Medical Center, New York, New York, U.S.A.

& INTRODUCTION The reduction and association of the scaphoid and lunate (RASL) procedure can provide a predictable and satisfactory means to treat irreparable, symptomatic scapholunate (SL) ligament tears (1–3). SL ligament tears can occur as an isolated injury due to a fall on the extended wrist involving axial load, wrist extension, intercarpal supination, and ulnar deviation or in conjunction with associated injuries such as distal radius fractures, which may lead to a missed or delayed diagnosis (4). Carpal ligament injuries represent a spectrum from isolated and partial SL ligament tears involving only the thin central membranous portion to perilunate or lunate dislocations with involvement of both intrinsic and extrinsic carpal ligaments. Ascertainment of the severity of injury can be difﬁcult and a “wrist sprain” may not recover with benign neglect. Fifty-ﬁve percent of patients with chronic tears develop a predictable pattern of arthritis, called scapholunate advanced collapse (SLAC) (5). Thus, a timely diagnosis and effective treatment are crucial for an optimal long-term outcome. Wrist motion in one plane is due to the composite effects of individual carpal bones that undergo unique multiplanar and often reciprocal motions. Radial and ulnar deviation occurs in the coronal plane, with the proximal capitate serving as the center of rotation. Additionally, during ulnar deviation, the scaphoid and lunate extend and during radial deviation they ﬂex (6,7). Finally, the proximal row pronates and the distal row supinates during radial deviation, with the opposite occurring during ulnar deviation (8). Thus, out of plane motion of the scaphoid and lunate is more apparent during wrist radial–ulnar deviation than during wrist ﬂexion and extension (9). Furthermore, within the proximal carpal row, there is disproportionate ﬂexion and extension between the scaphoid and lunate, with the scaphoid rotating fastest and to a larger degree (approximately 208). It is this obligate rotation that produces the most stress on SL reconstructions. SL ligament injury can be categorized based on radiographic patterns of instability. Static instability occurs when abnormal scaphoid and lunate alignment is present on routine posteroanterior (PA) and lateral radiographs (Fig. 1). Dynamic instability occurs when abnormalities occur only during stress radiographs (e.g., pronated grip or ulnar deviation PA views). Predynamic instability consists of a history and physical examination suggestive of SL injury, with SL interval pain on palpation, a negative Watson’s maneuver, and no radiographic changes on any views. Dorsal intercalated segment instability (DISI) refers to the position of the lunate, with its distal articular surface pointing dorsally (Fig. 2), as measured by an abnormal increase in the radiographic carpal angles (Table 1).

& CONTRAINDICATIONS FOR THE RASL PROCEDURE We would like to emphasize that the RASL procedure is contraindicated in the presence of a repairable SL ligament. The authors strongly believe that a primary repair should be attempted in all patients with a SL ligament that has sufﬁcient tissue quality and quantity to withstand suture placement and healing. When the ligament is avulsed from bone, typically off the lunate, suture anchors can be used to reattach the ligament. Supplemental SL and scaphocapitate transarticular pinning with Kirschner (K) wires and external immobilization should be employed to protect the repair during healing for eight weeks, particularly when carpal derotation is performed. Repairable ligaments are typically found in the acute setting, arbitrarily deﬁned as less than six weeks. However, we recommend examination of the ligament at surgery in all cases as some may be repairable despite being chronic. The RASL procedure is also contraindicated in the presence of signiﬁcant capitolunate arthritis. Focal arthritis between the radial styloid and scaphoid is not a contraindication because radial styloidectomy is part of the procedure and will adequately decompress this contact region.

& INDICATIONS FOR THE RASL PROCEDURE The degree of instability and the chronicity of the injury can guide the surgical decision-making. Partial ligament injuries which are stable may be treated with arthroscopic debridement alone (11) or arthroscopic debridement and thermal shrinkage (12,13). Complete ligament tears with static instability may be treated with arthroscopic debridement alone (14), reduction and temporary SL transarticular pinning (15), ligament repair with or without dorsal capsulodesis (16–21), dorsal capsulodesis alone (22), ligament reconstruction using various tendon weaves or bone-soft tissue-bone constructs (23), tenodeses with various wrist tendons (24–27), limited intercarpal fusions (10,28–32) or RASL (1–3). Each of these procedures has different strategies to reduce and control carpal instability. Some disrupt the normal carpal kinematics more than others, but none completely restore motion and stability. In the author’s opinion, the RASL procedure is indicated in a symptomatic patient without a repairable SL ligament and without signiﬁcant pancarpal arthritis. A patient may present with chronic dorsal wrist pain after having received a report of normal initial radiographs (predynamic instability) and then over time may develop additional cumulative minor injuries which progresses to a readily apparent dynamic or static instability on subsequent radiographs. Alternatively, initial symptoms may have been mild or resolved shortly after injury and the patient presents for evaluation for the ﬁrst time

118 & Goldberg et al.

FIGURE 1 Posteroanterior radiograph of a 53-year-old man with two months of wrist pain that began while moving large fertilizer bags by hand. The radiographs demonstrate signiﬁcant scapholunate diastasis and static instability. The distal scaphoid appears as a circle highlighting the cortical ring sign caused by the ﬂexed scaphoid. The scaphoid appears shortened and the capitate descends proximally.

with an acute on chronic unrecognized and asymptomatic injury. In these cases, the SL ligament is often attenuated, ﬁbrotic, with limited vascularity and capacity to hold a suture. Additionally, the repetitive loading on an incompetent SL ligament often leads to secondary intercarpal ligamentous stretching and attenuation in the dorsal intercarpal ligament and leads to wide diastasis and maximal rotatory instability precluding capsulodesis procedures alone. Patients who present after a failed primary surgical reconstruction such as SL ligament repair, SL pinning, or a dorsal capsulodesis, but who have not yet developed arthritis are also candidates for the RASL procedure.

& CONSIDERATIONS FOR PREOPERATIVE PLANNING Conﬁrmation of a SL tear is based upon a history with an appropriate mechanism of injury, correlative physical examination signs, and ﬁndings on imaging studies. Physical examination consists of observation, palpation, range of motion, and provocative maneuvers on both wrists to elicit asymmetry. The SL ligament can be palpated with deep pressure applied in the interval just distal and ulnar to Lister’s tubercle which is the location of the 3–4 portal for wrist arthroscopy. Watson’s scaphoid shift test is a provocative maneuver to assess for SL injury (33). The scaphotrapezial joint and the radiocarpal joints are palpated to assess the possibility of associated distal and volar ligamentous injuries.

FIGURE 2 Lateral radiograph of the same patient (Fig. 1). Note, the dorsal intercalated segment instability pattern with lunate extension, an increased capitolunate angle (358), an increased scapholunate angle (908), and dorsal translation of the capitate indicated by the offset position of the center of rotation of the lunate and capitate (black circles).

Complete sectioning of all three regions of the SL ligament in cadavers does not create static SL diastasis as viewed on a standard PA radiograph or DISI deformity on a lateral radiograph, or dynamic changes produced by stress views (7). Associated ligamentous injury may be required to produce abnormal carpal relationships such as the volar extrinsic (radiolunate, radioscaphocapitate) (6,34), the distal intrinsic (scaphotrapezial) (6,35), or the dorsal intercarpal ligaments (36). However, these ligament injuries may be in evolution and are not apparent on routine or stress radiographs until the carpus has experienced sufﬁcient load and time from the injury to produce classic ﬁndings. Plain radiographs are critical and should be obtained as the ﬁrst imaging study in every patient. The following radiographs should be obtained: PA in neutral rotation, PA in ulnar and

TABLE 1 Normal Lateral Radiographic Angles Angle Scapholunate (10) Radiolunate (41) Capitolunate (10)

Average (deg) 47 7 0

Range (deg) 35 to 70 K9 to 12 K20 to 15

Negative values indicate dorsiﬂexion and positive values equal palmar ﬂexion. Pathologic increases in scapholunate (SL) angle or dorsiﬂexion of the radiolunate or capitolunate angles represent SL instability with the opposite changes suggestive of lunotriquetral instability. Abbreviations: SL, scapholunate.

RASL Reconstruction for Scapholunate Instability & 119

radial deviation, clenched ﬁst PA in pronation, a true lateral in neutral rotation, and two 458 semi-oblique views. Comparison views of the contralateral normal wrist should be obtained as there is a wide range of normal angles. These radiographs may document the instability pattern that conﬁrms the SL injury and grades the extent of arthritis. On the PA radiograph, several radiographic changes may be noted. A widening of the SL joint space (SL dissociation) that is asymmetric with respect to the contralateral normal wrist is suggestive of a SL ligament injury. The SL distance has been measured at the proximal or mid aspect of the joint space and ranged from 2.5 to 5.0 mm in normal wrist radiographs (37,38). The scaphoid cortical ring sign occurs when excessive palmarﬂexion of the scaphoid causes the radiographic beam to be parallel with rather than perpendicular to the distal scaphoid (39). Rotation of the scaphoid shortens the distance between its proximal and distal ends. Additionally, with progressive lunate extension, the lunate shape changes from trapezoidal to triangular. The clenched ﬁst and ulnar deviation PA views load the SL joint and may increase the gap. Gilula deﬁned three arciform lines drawn along the proximal surface of the proximal carpal row, the distal surface of the proximal carpal row, and the proximal surface of the distal carpal row (40). A step off in any of these arcs suggests a carpal ligamentous injury, which may be enhanced by applying longitudinal traction to the wrist. In SL ligament injuries, the scaphoid ﬂexes and the lunate extends leading to abnormal SL angles on the lateral radiograph should be compared to the normal opposite wrist (Table 1). In the normal wrist, the central axis of the distal radius, lunate, and capitate should be aligned. In SL dissociation, these three bones become malaligned as the capitate collapses proximally and translates dorsally, forcing the lunate to rotate into extension (dorsal tilt) which increases the radiolunate (41) and capitolunate angles, decreases carpal height, and creates a DISI pattern. Other imaging modalities have limited usefulness in current management of suspected SL tears. Since abnormal arthrographic ﬁndings have been found in 74% of asymptomatic patients, wrist arthrography is seldom used (42). Magnetic resonance imaging (MRI) also has a limited application because its accuracy is dependent on observer experience, signal sequences, strength of magnet, and use of dedicated wrist coils resulting in variable sensitivities, speciﬁcities, and accuracies at a high cost. In a prospective study of arthroscopically conﬁrmed SL tears, MRI was only able to correctly diagnose acute and chronic SL tears in 75% of cases, with no beneﬁt of intravenous contrast (43). The sensitivity was 63% and speciﬁcity was 86%. However, in another study using MRI arthrography with a 1.5 T magnet, MRI was able to detect complete tears of the SL ligament with an improved sensitivity of 92%, speciﬁcity of 100%, and accuracy of 99% (44). Detection of partial tears had a lower sensitivity of 63%, but speciﬁcity and accuracy were still high at 100% and 95%, respectively.

ligaments, articular cartilage, and degree of instability. If an SL tear is conﬁrmed, no repairable dorsal ligament is observed, and no signiﬁcant arthritis is present, an arthroscopic or open RASL procedure can be performed. It is recommended that arthroscopic RASL be attempted only after considerable experience with the open procedure. Since the open procedure preserves and anatomically repairs the dorsal capsule, soft tissues are gently manipulated without excessive retraction, no tendons are harvested or split, no bones are fused, only the SL joint and radial styloid tip are exposed, and uninvolved joints are not transﬁxed with K-wires. We believe the open RASL procedure should be considered a minimally invasive technique. The hand is removed from the traction tower and a 6 cm midline, longitudinal incision is made on the dorsal wrist just ulnar to Lister’s tubercle centered over the radiocarpal joint. The retinaculum is incised through the third dorsal compartment. The extensor pollicis longus is gently retracted radially and the extensor digitorum communis tendons are retracted ulnarly to permit transverse capsular incision to be made over the SL joint between the dorsal intercarpal and dorsal radiotriquetral ligaments. A second longitudinal incision is made centered over the radial styloid. Branches of the dorsal sensory radial nerve and the dorsal radial artery are protected. The ﬁrst dorsal compartment is incised, the tendons gently retracted, and the capsule is incised. The radial styloid is exposed in a subperiosteally and a limited styloidectomy is performed, preserving the scaphoid fossa and extrinsic ligaments. Styloidectomy provides access to the radial proximal scaphoid for screw placement in the lunate center axis of rotation, removes radioscaphoid impingement, and addresses preexisting radioscaphoid arthritis. A 0.062 in. K-wire is placed into the most proximal dorsal surface of the extended lunate angled from proximal to distal (Fig. 3). It is important to place the wire proximal to the lunate center on the lateral ﬂuoroscopic image to prevent interference with the insertion of the headless screw. The wire is pushed distally, causing the wire to become perpendicular

& SURGICAL TECHNIQUE FOR THE RASL PROCEDURE Either regional or general anesthesia can be used, with administration of preoperative prophylactic intravenous antibiotics. The patient is placed supine on the operating room table with the arm on an armboard and a sterile tourniquet is applied and elevated to 250 mm Hg after extremity exsanguination. Using standard techniques described elsewhere in this text, the hand is suspended from a traction tower device and radiocarpal and midcarpal arthroscopy is performed to assess the carpal

FIGURE 3 Coronal view of the carpus illustrating the orientation of the scaphoid Kirschner (K) wire in a distal to proximal oblique direction and of the lunate K-wire orientation in a proximal to distal oblique direction. Lunate extension causes the capitate head to be abnormally uncovered (arrow). Proximal lunate descent causes loss of carpal height and increases scapholunate diastasis. Source: Adapted from Ref. 2.

120 & Goldberg et al.

to the dorsal surface of the wrist which causes palmarﬂexion of the lunate. If this wire is maximally ﬂexed, but the lunate is still not anatomically reduced, it may be necessary to place a second wire into the newly exposed dorsal and proximal part of the lunate, remove the ﬁrst wire, and then translate the second wire distally until the lunate is fully reduced. When the proximal uncovered capitate articular surface is fully covered by the lunate, reduction of the lunate is anatomic. This can be conﬁrmed ﬂuoroscopically by observing a capitolunate angle of 08 with both bones collinear on the lateral view. A K-wire is also placed into the dorsal scaphoid distal pole at an oblique angle from distal to proximal so that when wire is pushed proximally to extend the palmarﬂexed scaphoid, the wire becomes perpendicular to the dorsal surface of the wrist (Fig. 4). With the wires reducing the scaphoid and lunate, the articular cartilage is carefully removed from the opposing scaphoid and lunate surfaces with a mechanical burr until punctuate subchondral bleeding is observed (Fig. 5). This facilitates ingrowth of ﬁbrous connective tissue. If a remnant of the SL ligament is present, it is not debrided but left to add to the ﬁbrous connective tissue at the interface. A Kocher clamp is placed across the joystick K-wires after reduction is conﬁrmed (Fig. 6). A guide wire for the cannulated, Standard Headless Bone Screw (Hand Innovations, Miami, Florida, U.S.A.) is placed into the radial midwaist of the scaphoid exiting the scaphoid at the mid-point of its articular surface opposite the lunate, across the joint, and then into the center of the lunate pointing towards the medial vertex on the coronal image and the middle of the lunate on the lateral image (Figs. 7 and 8). The cannulated drill is placed over the guide wire and the hole is drilled. Then, the screw length is measured with a cannulated guide and the screw is advanced over the guide wire. The length should be slightly less than the length measured from the guide wire to allow countersinking of the screw beneath the scaphoid surface. All K-wires are removed. The radial capsule and periosteal sleeve are closed with interrupted absorbable sutures. The ﬁrst dorsal retinaculum is closed over the relocated tendons. The dorsal wrist capsule is

closed without imbrication to prevent loss of motion postoperatively. The EPL is left transposed out of its sheath. The wrist is immobilized in a volar splint for two to three weeks to allow for capsular healing; then, early motion in a supervised occupational therapy program is begun. Several weeks later, gradual strengthening is begun with unrestricted activity permitted at four to six months. The arthroscopic RASL procedure is essentially the same as described above without the use of the dorsal and radial incisions. The radial styloidectomy and decortication of the opposing scaphoid and lunate articular surfaces are performed with arthroscopic burrs through standard portals (see chap. 33 on SLAC wrist for details on styloidectomy). The K-wires for

FIGURE 4 Sagittal view of carpal Kirschner-wire orientation. The scaphoid wire is pushed toward the radius (arrow to right) to derotate the scaphoid out of palmarﬂexion and the lunate wire is pushed towards the hand (arrow to left) to derotate the lunate out of extension. After reduction, the wires should be roughly parallel rather than divergent. Source: Adapted from Ref. 2.

FIGURE 6 A Kocher clamp is used to hold the joysticks that have been used to derotate the scaphoid and lunate into their reduced position. Note, scapholunate diastasis is also corrected (arrow). Source: Adapted from Ref. 2.

FIGURE 5 Wires can be used to slightly increase scapholunate (SL) diastasis to facilitate insertion of a burr that is used to carefully remove cartilage in the SL interval until punctate bleeding is observed. This stimulates formation of a ﬁbrous neoligament. Abbreviations: SL, scapholunate. Source: Adapted from Ref. 2.

RASL Reconstruction for Scapholunate Instability & 121

scaphoid and lunate derotation and for headless bone screw guidance are placed percutaneously by manually pushing the wires down to bone and then advancing them with a wire driver to minimize wrapping up of soft tissues. To drill, measure and place the headless bone screw, a small incision is made radially.

& COMPLICATIONS

FIGURE 7 Intra-operative ﬂuoroscopic posteroanterior image of guidance wire placement prior to cannulated screw placement. The wire is placed into the midwaist of the scaphoid exiting the scaphoid at the midpoint of its articular surface opposite the lunate, and then into the center of the lunate at the medial vertex on the coronal image.

There have been no occurrences of major intraoperative or postoperative complications consisting of infection, nerve injury, or screw breakage. Accurate measurement of screw length is important with placement of a screw slightly shorter than the measured length of the guide wire so that adequate countersinking below the surface of the radial aspect of the scaphoid can be performed. Two out of 24 patients have required screw removal at an average 49 months after surgery due to screw head prominence. One patient maintained carpal alignment and is asymptomatic after screw removal and the second patient has developed instability and progressive arthritis. No headless bone screw threads should cross the SL interval to allow rotation of the scaphoid and lunate with respect to one another. Furthermore, it is critical that the screw be placed through the center of rotation of the scaphoid and the lunate in both the sagittal and coronal planes. Increasing screw obliquity or deviation from the lunate center of rotation may limit motion between the scaphoid and lunate or cause toggling of the bones rather than rotation. It is the obligatory physiologic SL rotation that leads all of the retained screws to show lucency around the lunate threads without migration. Complete reduction of the scaphoid, lunate, and capitate is essential to restore normal anatomy and allow central placement of the screw. Incomplete SL reduction may predispose to abnormal carpal loading and kinematics that cause screw loosening, progressive carpal instability, or the development of arthritis. This may partially explain why 3 of 24 patients who underwent the RASL procedure needed a subsequent surgical treatment with a proximal row carpectomy or arthrodesis procedure due to recurrent instability and symptoms. Failure to preserve the origins of the radioscaphocapitate, dorsal radiocarpal, and long radiolunate ligaments by aggressive removal of too much of the radial styloid can lead to ulnar and volar carpal translocation (see chap. 33 SLAC wrist for details) (45,46). This was observed in one patient.

& OUTCOME OF THE RASL PROCEDURE

FIGURE 8 Intra-operative ﬂuoroscopic lateral image of wire placement prior to cannulated screw. The wire is appropriately positioned through the scaphoid and into the middle of the lunate on the lateral image.

In the senior authors’ experience, the RASL procedure has been used to treat patients with irreparable, chronic (an average of 16 months post-injury) SL tears, with 22 static and two dynamic patterns of instability. At an average of 62 months after surgery, the average Visual Analog Score for pain was 1 and the average disabilities of the arm, shoulder and hand (DASH) score was 23. The RASL procedure provides continued improvement in wrist function as the DASH continues to decrease with time and patient wrist use. The average Physical Component Score and Mental Component Score on the SF-36 were 45.8 and 52.1, respectively, with 50 being the average score for the general population (47). The average ﬂexion/extension arc was 1038 and radial/ulnar deviation was 438. Grip strength was 79% of the uninvolved wrist. The SL gap was signiﬁcantly reduced at ﬁnal radiographic follow-up of 18 months from 5.1 to 1.6 mm (p!0.05). The RASL effectively restores and maintains carpal alignment, as measured by signiﬁcant reduction of the SL angle

122 & Goldberg et al.

from 818 to 538 at ﬁnal follow-up in patients with preoperative static instability (Figs. 9–12). Soft tissue procedures that do not involve intercarpal fusion preserve SL motion, but they have not been as successful in maintaining an improved SL angle at ﬁnal follow-up evaluations, even with lesser degrees of preoperative static instability ranging from 538 to 788 (17,19,20,48). This may be due to the lack of effective control of lunate extension by solely scaphoid-based reconstructions such as dorsal capsulodesis.

& SUMMARY From cadaver studies, we know that normal wrist ligaments maintain the carpal height and alignment through balanced tension that results in stored potential energy. When one or more ligaments is compromised, the potential energy is released as kinetic energy, as the carpal bones rotate, translate, and collapse into a more stable conﬁguration (49). The ﬁrst part of the RASL procedure is reduction of the scaphoid and lunate back to stable alignment with the lunate colinear with the radius and capitate and the scaphoid in a mid-ﬂexed posture with respect to the radius. Simultaneously, the critical midcarpal lunatocapitate relationship is restored when the proximal pole of the capitate is captured by the concave distal articular surface of the lunate and the ulnar aspect of the scaphoid.

FIGURE 9 Posteroanterior clenched ﬁst radiograph of the patient seen in Figure 1 after a reduction and association of the scaphoid and lunate procedure at 40 months follow-up. The Visual Analog Scale for pain was 1 (0Zbest, 10Zworst), grip strength was symmetric, and disabilities of the arm, shoulder and hand score was 2 (0Zbest, 100Zworst). Note the central placement of the screw from the scaphoid waist to the lunate vertex. Radiocarpal and midcarpal joint spaces are preserved without evidence of arthritic progression in the capitolunate and radioscaphoid joints. Radiolucency is seen at both ends of the screw without screw migration, indicating expected, persistent carpal bone rotation around the screw.

FIGURE 10 Lateral radiograph of the same patient (Fig. 1) after a reduction and association of the scaphoid and lunate procedure at 40 months follow-up demonstrating a slightly volar placement of the screw with radiolucency appreciated.

FIGURE 11 Posteroanterior radiograph with wrist in radial deviation of the same patient (Fig. 1) after a reduction and association of the scaphoid and lunate procedure at 40 months follow-up. Note the foreshortened scaphoid indicating scaphoid palmarﬂexion during radial deviation.

RASL Reconstruction for Scapholunate Instability & 123

& SUMMATION POINTS

Indications

Initial treatment or after a failed alternative surgical treatment for an irreparable, symptomatic SL ligament tear with any degree of instability.

Contraindications

Signiﬁcant pancarpal arthritis.

Outcomes

Excellent pain relief, improved function, maintenance of functional wrist motion, and maintenance of carpal alignment at ﬁve years.

Complications

Occurred primarily in initial cases and decreased as experience with the technique increased & & & &

Screw backout/prominence 8% (2/24) Screw placement off center axis 12% (3/24) Excessive styloidectomy 4% (1/24) Inadequate carpal bone derotation.

& REFERENCES 1. 2. FIGURE 12 Posteroanterior radiograph with wrist in ulnar deviation of the same patient (Fig. 1) after a reduction and association of the scaphoid and lunate procedure at 40 months follow-up. Scaphoid is in a normal, extended position compared to its ﬂexed posture on the radial deviation view, indicating rotation is occurring between scaphoid and lunate. The lunate also changes position relative to the radial deviation view indicating that it also rotates during wrist motion.

3. 4. 5. 6.

The second part of the procedure is the association of the scaphoid and lunate with a headless bone screw while a ﬁbrous neoligament forms, both of which establish long-term carpal stability. Permanent, planned retention of the screw distinguishes this technique from the one described by Herbert (50). This is critical to allow for adequate remodeling of the ﬁbrous neoligament and to prevent the capitate from forming a wedge between the scaphoid and lunate if it is allowed to descend proximally. The prevention of carpal collapse may prevent or slow SLAC arthritis. Planned motion between the scaphoid and lunate around the screw and neoligament allows more normal kinematics and load transmission than limited intercarpal fusions. Thus, the RASL procedure nearly recapitulates carpal kinematics when soft tissue reconstruction alone may be inadequate or a limited arthrodesis is not desired. SL ligament tears are common causes of chronic wrist pain and can lead to progressive patterns of arthritis. A thorough understanding of wrist anatomy and kinematics is necessary to select the appropriate treatment. The RASL procedure is an effective technique to restore carpal alignment, preserve motion, and improve symptoms without limiting future surgical treatments including intercarpal fusions, proximal row carpectomy, or wrist arthrodesis, should ﬁxation fail or arthritis progress.

7.

8. 9. 10. 11. 12. 13. 14. 15.

Lipton CB, Ugwonali OF, Sarwahi V, et al. Reduction and association of the scaphoid and luante for scapholunate ligament injuries (RASL). Atlas Hand Clin 2003; 8(2):249–60. Rosenwasser MP, Miyasaka KC, Strauch RJ. The RASL procedure: reduction and association of the scaphoid and lunate using the Herbert screw. Tech Hand Up Extrem Surg 1997; 1(4):263–72. Lipton C, Ugwonali O, Sarwahi V, et al. The treatment of chronic scapholunate dissociation with reduction and association of the scaphoid and lunate (RASL). Atlas Hand Clin 2003; 8(1):95–105. Lindau T, Arner M, Hagberg L. Intraarticular lesions in distal fractures of the radius in young adults. A descriptive arthroscopic study in 50 patients. J Hand Surg [Br] 1997; 22(5):638–43. Watson HK, Weinzweig J, Zeppieri J. The natural progression of scaphoid instability. Hand Clin 1997; 13(1):39–49. Short WH, Werner FW, Green JK, et al. Biomechanical evaluation of ligamentous stabilizers of the scaphoid and lunate. J Hand Surg [Am] 2002; 27(6):991–1002. Hurkmans HL, Kooloos JG, Meijer RS. Scapho-lunate dissociation and arthrodesis. An experimental study with lesions of the interosseous ligament and fusions with K-wires. Clin Biomech (Bristol, Avon) 1996; 11(4):220–6. Linscheid RL, Dobyns JH. Dynamic carpal stability. Keio J Med 2002; 51(3):140–7. Short WH, Werner FW, Fortino MD, et al. Analysis of the kinematics of the scaphoid and lunate in the intact wrist joint. Hand Clin 1997; 13(1):93–108. Watson HK, Belniak R, Garcia-Elias M. Treatment of scapholunate dissociation: preferred treatment—STT fusion vs. other methods. Orthopedics 1991; 14(3):365–8 (Discussion 368–70). Ruch DS, Smith BP. Arthroscopic and open management of dynamic scaphoid instability. Orthop Clin North Am 2001; 32(2):233–40 (see also vii). Darlis NA, Weiser RW, Sotereanos DG. Partial scapholunate ligament injuries treated with arthroscopic debridement and thermal shrinkage. J Hand Surg [Am] 2005; 30(5):908–14. Hirsh L, Sodha S, Bozentka D, et al. Arthroscopic electrothermal collagen shrinkage for symptomatic laxity of the scapholunate interosseous ligament. J Hand Surg [Br] 2005; 30(6):643–7. Weiss AP, Sachar K, Glowacki KA. Arthroscopic debridement alone for intercarpal ligament tears. J Hand Surg [Am] 1997; 22(2):344–9. Whipple TL. The role of arthroscopy in the treatment of scapholunate instability. Hand Clin 1995; 11(1):37–40.

124 & Goldberg et al. 16. Bickert B, Sauerbier M, Germann G. Scapholunate ligament repair using the Mitek bone anchor. J Hand Surg [Br] 2000; 25(2):188–92. 17. Bloom HT, Freeland AE, Bowen V, et al. The treatment of chronic scapholunate dissociation: an evidence-based assessment of the literature. Orthopedics 2003; 26(2):195–203 (Quiz 204–5). 18. Lavernia CJ, Cohen MS, Taleisnik J. Treatment of scapholunate dissociation by ligamentous repair and capsulodesis. J Hand Surg [Am] 1992; 17(2):354–9. 19. Uhl RL, Williamson SC, Bowman MW, et al. Dorsal capsulodesis using suture anchors. Am J Orthop 1997; 26(8):547–8. 20. Szabo RM, Slater RR, Jr., Palumbo CF, et al. Dorsal intercarpal ligament capsulodesis for chronic, static scapholunate dissociation: clinical results. J Hand Surg [Am] 2002; 27(6):978–84. 21. Wyrick JD, Youse BD, Kiefhaber TR. Scapholunate ligament repair and capsulodesis for the treatment of static scapholunate dissociation. J Hand Surg [Br] 1998; 23(6):776–80. 22. Wintman BI, Gelberman RH, Katz JN. Dynamic scapholunate instability: results of operative treatment with dorsal capsulodesis. J Hand Surg [Am] 1995; 20(6):971–9. 23. Almquist EE, Bach AW, Sack JT, et al. Four-bone ligament reconstruction for treatment of chronic complete scapholunate separation. J Hand Surg [Am] 1991; 16(2):322–7. 24. Glickel SZ, Millender LH. Ligamentous reconstruction for chronic intercarpal instability. J Hand Surg [Am] 1984; 9(4):514–27. 25. Brunelli GA, Brunelli GR. A new surgical technique for carpal instability with scapho-lunar dislocation. (Eleven cases). Ann Chir Main Memb Super 1995; 14(4–5):207–13. 26. Van Den Abbeele KL, Loh YC, Stanley JK, et al. Early results of a modiﬁed Brunelli procedure for scapholunate instability. J Hand Surg [Br] 1998; 23(2):258–61. 27. Talwalkar SC, Edwards AT, Hayton MJ, et al. Results of tri-ligament tenodesis: a modiﬁed Brunelli procedure in the management of scapholunate instability. J Hand Surg [Br] 2006; 31(1):110–7. 28. Watson HK, Weinzweig J, Guidera PM, et al. One thousand intercarpal arthrodeses. J Hand Surg [Br] 1999; 24(3):307–15. 29. Rotman MB, Manske PR, Pruitt DL, et al. Scaphocapitolunate arthrodesis. J Hand Surg [Am] 1993; 18(1):26–33. 30. Hom S, Ruby LK. Attempted scapholunate arthrodesis for chronic scapholunate dissociation. J Hand Surg [Am] 1991; 16(2):334–9. 31. Kleinman WB. Management of chronic rotary subluxation of the scaphoid by scapho-trapezio-trapezoid arthrodesis. Rationale for the technique, postoperative changes in biomechanics, and results. Hand Clin 1987; 3(1):113–33. 32. Hastings DE, Silver RL. Intercarpal arthrodesis in the management of chronic carpal instability after trauma. J Hand Surg [Am] 1984; 9(6):834–40.

33. Watson HK, Ashmead D, Makhlouf MV. Examination of the scaphoid. J Hand Surg [Am] 1988; 13(5):657–60. 34. Ruby LK, An KN, Linscheid RL, et al. The effect of scapholunate ligament section on scapholunate motion. J Hand Surg [Am] 1987; 12(5 Pt 1):767–71. 35. Boabighi A, Kuhlmann JN, Kenesi C. The distal ligamentous complex of the scaphoid and the scapho-lunate ligament. An anatomic, histological and biomechanical study. J Hand Surg [Br] 1993; 18(1):65–9. 36. Mitsuyasu H, Patterson RM, Shah MA, et al. The role of the dorsal intercarpal ligament in dynamic and static scapholunate instability. J Hand Surg [Am] 2004; 29(2):279–88. 37. Meade TD, Schneider LH, Cherry K. Radiographic analysis of selective ligament sectioning at the carpal scaphoid: a cadaver study. J Hand Surg [Am] 1990; 15(6):855–62. 38. Baratz ME, Dunn MJ. Ligament injuries and instability of the carpus: scapholunate joint. In: Berger RA, Weiss AP, eds. Hand Surgery. Philadelphia, PA: Lippincott Williams and Wilkins, 2004:481–94. 39. Cautilli GP, Wehbe MA. Scapho-lunate distance and cortical ring sign. J Hand Surg [Am] 1991; 16(3):501–3. 40. Gilula LA. Carpal injuries: analytic approach and case exercises. AJR Am J Roentgenol 1979; 133(3):503–17. 41. Mack GR, Bosse MJ, Gelberman RH, et al. The natural history of scaphoid non-union. J Bone Joint Surg Am 1984; 66(4):504–9. 42. Herbert TJ, Faithfull RG, McCann DJ, et al. Bilateral arthrography of the wrist. J Hand Surg [Br] 1990; 15(2):233–5. 43. Schadel-Hopfner M, Iwinska-Zelder J, Braus T, et al. MRI versus arthroscopy in the diagnosis of scapholunate ligament injury. J Hand Surg [Br] 2001; 26(1):17–21. 44. Schmitt R, Christopoulos G, Meier R, et al. Direct MR arthrography of the wrist in comparison with arthroscopy: a prospective study on 125 patients. Rofo 2003; 175(7):911–9. 45. Nakamura T, Cooney WP, III, Lui WH, et al. Radial styloidectomy: a biomechanical study on stability of the wrist joint. J Hand Surg [Am] 2001; 26(1):85–93. 46. Jeffries AO, Craigen MA, Stanley JK. Wear patterns of the articular cartilage and triangular ﬁbrocartilaginous complex of the wrist: a cadaveric study. J Hand Surg [Br] 1994; 19(3):306–9. 47. Ware JE, Jr. SF-36 health survey update. Spine 2000; 25(24):3130–9. 48. Muermans S, De Smet L, Van Ransbeeck H. Blatt dorsal capsulodesis for scapholunate instability. Acta Orthop Belg 1999; 65(4):434–9. 49. Cohen MS. Ligamentous injuries of the wrist in the athlete. Clin Sports Med 1998; 17(3):533–52. 50. Herbert TJ. Acute rotary dislocation of the scaphoid: a new technique of repair using Herbert screw ﬁxation across the scapho-lunate joint. World J Surg 1991; 15(4):463–9.

16 Prosthetic Arthroplasty of Proximal Pole Scaphoid Nonunions Christophe L. Mathoulin

Institut de la Main, Clinique Jouvenet, Paris, France

& INTRODUCTION Pseudarthrosis and necrosis of the proximal pole of the scaphoid are difﬁcult to treat and the outcome is uncertain, particularly in elderly people. Eventually, this problem leads to radioscaphoid arthritis, which progressively spreads to the entire wrist and causes carpal collapse, in a typical pattern: scaphoid nonunion advanced collapse (wrist). In the same way, scapholunate dislocation rapidly leads to styloscaphoid arthritis in which the capitate collapses into the scapholunate space: scapholunate advanced collapse (wrist). Several authors have previously advocated the replacement of the proximal pole of the scaphoid. The silicon spacer promoted by Michon (1) then by Zemel (2) is no longer used and has been replaced by autologous biological materials proposed by Eaton (3). Jones (4) proposed a spherical vitallium implant, whereby the prosthesis was put into a cage with the risk of dislocation. A novel implant which adapts to the kinematics of the carpus has recently been proposed (5). The adaptive proximal scaphoid implant (APSI; Bioproﬁle, Grenoble, France) is made of pyrolitic carbon. The total biocompatibility of this material has been previously proven (6,7). Hard wearing and chemically inert, it does not wear away the bone. Its friction coefﬁcient is low when rubbing against bone and cartilage and allows it to slide between the cartilage and the surrounding ligaments to ﬁnd the position of least resistance against the deformable walls of its biologic cage. Because it does not adhere to the surrounding walls, it does not apply pressure to the surrounding bones and does not initiate a dislocation. Its module of elasticity is almost identical to that of bone, allowing it to be tolerated fully (Young’s module: boneZ20, APSIZ25). This absence of difference between the elasticity modules avoids wear and tear on the bone. This implant is distinctive in that its ovoid shape allows its “adaptive” mobility when the ﬁrst row of carpal bones moves (6). Frontally, the small radius corresponds to the scaphoid area of the radius, and from the side view the large radius forms an ovoid, of which the large curve is anteroposterior and the small curve is frontal (Fig. 1). By rotating on these axes during frontal deviation and ﬂexion–extension movements, the APSI copies the movements of the proximal scaphoid exactly and becomes integrated in a corroborating and synchronous way with the kinematics of the carpal bones. Because of this three-dimensional reorientation during the movements of the wrist, the implant remains stable in the physiological amplitudes and does not require any form of ﬁxation to the distal scaphoid or periprosthetic encapsulation (Fig. 2). In view of the quality of the reported results with an open procedure, we decided to try placing the implant by

arthroscopy. This report details our experience positioning this implant by using wrist arthroscopy.

& INDICATIONS This technique is only reserved for replacement of the proximal pole of the scaphoid in which reconstruction is not possible (excessively small fragment, an osseous fragment separated into several small pieces). The surrounding cartilage surfaces are generally intact without arthrosis. The use of this implant is a very good salvage procedure in elderly people but could be a “waiting” therapeutic option in young patients. The contraindications include too large of a proximal fragment of the scaphoid (waist fracture) and signiﬁcant chondral changes of the surrounding bones. The presence of styloid arthritis is not a contraindication because one can perform a radial styloidectomy during the same operative procedure. Furthermore, the minimally invasive technique is better than open surgery, because with the use of wrist arthroscopy the surgeon avoids a large approach and the normal risk of internal joint ﬁbrosis.

& CONSIDERATIONS FOR PREOPERATIVE PLANNING & Preoperative Physical Examination The examination is the same as for all scaphoid nonunions: the surgeon should document the location of pain, range of motion, strength, and functional status. The examination is done comparatively to the opposite side.

& Preoperative Imaging Simple radiographies (frontal, lateral, and speciﬁc scaphoid view) are most often sufﬁcient. Comparative X rays of opposite side are required. CT scan and MRI can be added in order to check the viability of the proximal fragments and the importance of chondral changes. Because the wrist continues to challenge clinicians with its array of potential diagnoses and treatments and multiple cartilaginous surfaces, combined with the intrinsic and extrinsic ligaments, wrist arthroscopy has proven to be a useful adjunct in the diagnosis and planning of scaphoid nonunions, and is a real part of the treatment.

& SURGICAL TECHNIQUE All patients in our series were operated on as outpatients under local–regional anesthesia using a pneumatic tourniquet (8). The arm is laid ﬂat on an arm table, and axial traction is applied to the forearm and wrist using a wrist tower. The strength of

126 & Mathoulin

FIGURE 1 Position of the APSI in front and side view X-rays. Abbreviation: APSI, adaptive proximal scaphoid implant. FIGURE 3 Radiocarpal joint ﬁlling. (A)

the traction is usually 5 to 7 kgf. After drawing the different bone parts on the carpus, the wrist is ﬁlled with saline solution (Fig. 3). At ﬁrst, the arthroscopic guide and the arthroscope are positioned in the radiocarpal joint using 4–5 or 6-R radiocarpal portal. Exploration of the joint is performed, locating any possible associated lesions. After locating the proximal pole, a 3–4 radiocarpal portal is performed. This surgical approach is slightly larger than usual, about 1.5 cm, so that the proximal pole can be withdrawn and the implant put in place. The arthroscope can easily be positioned in this surgical approach, allowing direct access to the area of nonunion. A radial midcarpal surgical approach is used to analyze cartilage and to monitor the positioning of the implant. After examining the proximal pole, the remaining cartilage is analyzed. First, the luno–radial area is analyzed in order to check that the cartilage between the lunate and radius is sound (Fig. 4A,B). Second, the quality of the cartilage between the distal scaphoid and the capitate is evaluated. It is often surprising to see good articular cartilage at this interval, especially in elderly people whereas considering the age of the lesions one would expect to see much more extensive cartilage degeneration. Finally, the state of the cartilage between the head of the capitate and the distal face of the lunate is analyzed.

& Resection of the Proximal Part of the Scaphoid (B)

Proximal pole resection is a relatively easy procedure, depending on how old the lesion is. In certain cases, it is necessary to use a burr to resect the proximal pole (Fig. 5). Sometimes we are faced with a small, necrosed proximal pole, weakly attached to the lunate by a few ligament ﬁbers. The attachments are divided under arthroscopic control using instruments such as a surgical blade and small scissors (Figs. 6 and 7A,B). The detached proximal pole is easily withdrawn with forceps (Fig. 8). A radial styloid osteotomy is sometimes recommended to remove a painful contact between the styloid and the remaining distal part of the scaphoid.

& Placing the Implant FIGURE 2 (A) X-ray of a case with untreatable necrotic proximal pole. (B) X-ray in ulnar and radial deviation showing the mobility and threedimensional adaptability of the implant.

First, the test implant is tried. There are three sizes: &

Small: length 16 mm and width 8 mm.

Prosthetic Arthroplasty of Proximal Pole Scaphoid Nonunions & 127 (A)

(B)

FIGURE 5 Diagram showing the 4–5 radiocarpal portal for the arthroscope and the possibility of proximal pole resection through the 3–4 radiocarpal portal using a burr.

arthroscopic control (Fig. 12). After removing the arthroscope, forced wrist movements are carried out to conﬁrm that there is no dislocation of the implant. A representative case with preand postoperative X-rays is seen in Figure 13.

& Postoperative Care Only the 3–4 radiocarpal portal is closed by one or two stitches. As for normal wrist arthroscopy, it is not necessary to close the

FIGURE 4 (A) Arthroscopic midcarpal view showing arthritis the position of necrotic proximal pole between the distal scaphoid on the left and the lunate on the right. (B) Arthoscopic view showing the chondral change of the capitate. The cartilage between the lateral side of the capitate and the medial side of the distal scaphoid is sound.

& &

Medium: length 17 mm and width 9.1 mm. Large: length 18 mm and width 10 mm.

The size is chosen on the operating table by positioning the test implants next to the resected proximal pole (Fig. 9). The test implant is then put into the radiocarpal joint in place of the proximal pole, and it is very satisfying to see how well this implant ﬁts itself into the correct position (Fig. 10). After checking the correct congruence of the test implant by arthroscopy (Fig. 11A,B), it must be taken out. This is not always easy and is evidence of the good natural stability of the implant. It is replaced very easily by the deﬁnitive prosthesis, still under

FIGURE 6 Radiocarpal arthroscopic view showing the use of a surgical blade to perforate the sacpholunate ligament.

128 & Mathoulin (A)

(B)

FIGURE 9 The resected proximal part of the scaphoid compared to the test and actual implants in order to choose the right size.

depending on postoperative pain. If necessary, rehabilitation can start after the third week.

& COMPLICATIONS The most important technical point is to remove all fragments of proximal pole of the scaphoid. It is necessary to separate completely the scapholunate ligament attachment in order to easily remove the several pieces of bone, especially when they FIGURE 7 (A,B) Radiocarpal arthroscopic view showing the use of a scissors to separate the proximal pole and the lunate.

other portals. A protective dressing is put in place for eight days. Mobility is started immediately, letting the patient choose, themselves, the movements he or she wishes to make

FIGURE 8 Radiocarpal arthroscopic view showing the proximal pole removal.

FIGURE 10 Diagram showing a radial midcarpal portal for the arthroscope before placing the test implant.

Prosthetic Arthroplasty of Proximal Pole Scaphoid Nonunions & 129 (A)

.entheosweb.com

FIGURE 12 Midcarpal arthroscopic view showing the correct position of the implant. It is interesting to compare this view to the preoperative one (Fig. 4A) in order to see how the implant ﬁts itself in the right position.

(B)

FIGURE 11 (A) Diagram showing a 3–4 radiocarpal portal for the arthroscope to check the correct position of the test implant. (B) Radiocarpal arthroscopic view showing the correct position of the test implant and the distal part of the distal scaphoid.

are small. Nevertheless, we have to take care not to damage the volar capsule to avoid volar dislocation of the implant in normal dorsal extension. We had a case of volar dislocation of the implant postoperatively. It appeared that we created a little hole with scissors when we separated the attached proximal pole to the lunate. The implant passed by this hole and stayed in volar soft tissue. We had to replace the implant by a classic open volar approach and close the volar capsule perforation but had no further problems.

& OUTCOME We have operated on 18 patients during the period from the year 2000 to 2004. All were operated on as outpatients under

local–regional anesthesia using a pneumatic tourniquet. The average age was 49 years (range 40–81 years). There were 14 men and 4 women. All 18 patients were available for followup examination and radiographs. The average follow-up time was 28 months (range 12–63 months). In younger people, we needed to place a volar splint in half of the cases. There were no immediate postoperative complications. We had one case of volar implant dislocation in the youngest patient, surely in connection with a lesion of volar capsule at the time of proximal pole removal. After intraarticular replacement, suture of the capsule, and cast immobilization for six weeks, the patient ﬁnally had a very good result. We can separate these patients into two separate subgroups. The ﬁrst series consisted of only elderly people: six patients. The average age was 76 years (range 72–81 years). All presented extensive arthritis with complete necrosis of proximal pole of the scaphoid and disabling pain. None of our six elderly patients had postoperative immobilization. The average follow-up was 39 months (range 25–63 months). The range of motion increased in all the cases from an average of 458 to 758 of active ﬂexion–extension. None of these patients had pain at the longest follow-up. We did not have any complications. The second series consisted of the youngest patients, 10 men and two women. The average age was 44 years (range 40– 61 years). They all had necrotic proximal poles of the scaphoid in which the reconstruction and/or revascularization was impossible due to the small necrotic pieces of scaphoid. All had no adjacent chondral changes except in front of the proximal pole. The average follow-up was 23 months (range 12–49 months). The major complication in this series was the one case of volar implant dislocation. We had two failures in poor indications (nonunion of the waist scaphoid). This technique should be reserved only for the proximal pole nonunions because the size of the implant is not adapted for replacement of a large part of the scaphoid. We performed palliative treatment in these cases (one four-bone arthrodesis and one proximal row carpectomy). Except these two cases, all the other cases had excellent to good result without signiﬁcant pain based on a modiﬁed Mayo Wrist scoring system and were completely satisﬁed. Pain disappeared completely after three months. In all the cases,

130 & Mathoulin (A)

(B)

(C)

(D)

FIGURE 13 (A,B) Case 1: Front and side view X-rays of a necrotic proximal pole of the scaphoid. (C,D) Case 1: Side and front view X-rays showing the perfect position of the implant postoperatively.

the wrist range of motion improved in the ﬂexion–extension arc from an average of 508 before surgery to an average of 1008 after surgery. The incisions all healed well with very minimal scarring (Fig. 14). The parameters of radial–ulnar deviation and grip strength improved markedly after surgery.

& SUMMARY The indications are rare and reserved only for necrotic proximal pole, but when the rules of placement are respected, arthroscopic arthroplasty for proximal pole scaphoid nonunion is a safe and reliable procedure. It is a simple salvage procedure in elderly people but could be a “waiting” therapeutic option in young patients with necrotic proximal pole of the scaphoid.

Brief Indications

Replacement of necrotic, unreconstructable proximal pole of the scaphoid.

Outcomes & &

Good increase in range of motion. Excellent reduction in pain.

Complications & &

FIGURE 14 Cosmetic appearance without scar.

One case of volar implant dislocations. Two failures in bad indications (nonunion of the waist scaphoid). These cases required palliative treatment (one four-bone arthrodesis and one proximal row carpectomy).

Prosthetic Arthroplasty of Proximal Pole Scaphoid Nonunions & 131

& REFERENCES 1. Michon J, Merle M, Girod J, et al. Replacement prothetique des os du carpe. In poignet et medicine de reeducation. Paris: Masson, 1981:255–63. 2. Zemel NP, Stark HH, Ashworth CR, et al. Treatment of selected patients with ununited fracture of the proximal part of the scaphoid by excision of the fragment and insertion of a curved silicone rubber spacer. J Bone Joint Surg 1984; 66:510–7. 3. Eaton RG, Akelman E, Eaton BH. Fascial implant arthroplasty for treatment of radioscaphoid degenerative disease. J Hand Surg 1989; 14:766–74. 4. Jones JK. Replacement of the proximal portion of the scaphoid withspherical implant for post-traumatic carporadial arthiritis. J Hand Surg 1985; 10:217–26.

5. Pequignot JP, Lussiez B, Allieu Y. Implant adaptatif du scaphoide proximal. Chirurge De La Main 2000; 2:276–85. 6. Chen L, Vincent J, Hetherington L, et al. A review of pyrolitic carbon: application in bone and joint surgery. J Foot Ankle Surg 1993; 32:490–8. 7. Cook SD, Beckenbaugh R, Weinstein AM, et al. Pyrolitic carbon implants in the metacarophalangeal joints of baboons. Orthopedics 1983; 6:952–61. 8. Mathoulin CL. Arthroscopic arthroplasty for proximal pole of scaphoid nonunion. In: Geissler WB, ed. Atlas of Hand Clinics. Philadelphia, PA: W.b. Saunders Company, 2001:341–58.

Part V: Minimally Invasive Procedures for Distal Radius Fracture Fixation

17 Augmented External Fixation for Distal Radius Fractures John T. Capo, Kenneth G. Swan, Jr., and Virak Tan

Department of Orthopedics, The New Jersey Medical School, University of Medicine and Dentistry of New Jersey, Newark, New Jersey, U.S.A.

& INTRODUCTION Distal radius fractures are extremely common injuries that are most frequently seen in children and again later in life in elderly osteopenic women (1). The majority of distal radius fractures are simple fractures resulting from a fall and impact on an outstretched hand, and may be treated nonoperatively. Highenergy distal radius fractures are more common in younger adults, and in these patients, the need for operative stabilization is more likely. In addition, some of the osteoporotic low-energy fractures may be unstable injuries that require operative stabilization. The demands of the elderly patient are increasing as they become more active and physiologically healthier. The use of external ﬁxators, augmented with pins, screws, or small plates inserted through percutaneous or minimally invasive means, is a useful technique in the treatment of distal radius fractures.

& INDICATIONS A typical injury is a bending fracture that is usually seen in an elderly female. The fracture line is in the metaphysis and may be comminuted, while the articular surface is often intact. These fractures are often amenable to external ﬁxation combined with percutaneous pinning. More high-energy fractures usually combine metaphyseal and articular comminution. These fractures demand more extensive methods of ﬁxation and can be stabilized with a combination of external ﬁxation and limited open reduction and internal ﬁxation (ORIF) with pins, screws, or small plates. Also, open fractures are particularly suited to external ﬁxation, as the wound is exposed and easily examined for postoperative care. Some fractures can be deemed unstable at presentation. An unstable distal radius fracture can be deﬁned by several criteria. These include articular step-off O2 mm, comminution O50% (extending from dorsal to volar), dorsal angulation O208, shortening O10 mm, a shearing Barton-type fracture pattern, and a fracture combined with a radiocarpal dislocation. When any of these criteria are met, the fracture is usually best treated operatively. Closed treatment of these injuries has shown poor results with a tendency to redisplace (2). Other indications for operative treatment are: those patients with lower extremity injuries who need to weight bear through their upper extremity and need rigid ﬁxation; other fractures of the ipsilateral upper extremity that require stable ﬁxation of the radius to rehabilitate the arm to achieve functional range of motion (ROM); and often open fractures combined with soft-tissue injury. In addition, when combined with ORIF, external ﬁxators are an excellent method of unloading the carpus to allow small

articular fragments and osteopenic metaphyseal bone to heal completely (3,4).

& PREOPERATIVE PLANNING & Physical Exam A distal radius fracture typically presents with tenderness, ecchymosis, and a variable amount of swelling dorsally over the distal radius. There is often a deformity at the wrist, and it may assume a position of apex–volar angulation. Neuorvascular status must be completely examined. Median nerve function is critical as distal radius fractures may induce swelling that may create acute carpal tunnel syndrome or, in severe cases, a true compartment syndrome. Tendon function needs to be examined, with attention to the extensor pollicis longus. The carpus must be examined for tenderness that may indicate carpal fractures or ligamentous injuries.

& Imaging Anterior–posterior (AP) and lateral plain radiographs are usually sufﬁcient to characterize the distal radius fracture. Oblique ﬁlms with 308 pronation and supination often detect subtle distal radius fractures. If there is severe shortening or displacement of the radius or ulna, then an elbow radiograph should be obtained to evaluate for longitudinal forearm instability or associated elbow fractures. Computed tomography scans of the radius are occasionally helpful to learn more about the articular involvement of the radius. Axial cuts with two-dimensional reconstructions in the frontal and sagittal planes are helpful to detect fragment size and displacement. This information may help in planning operative approaches to achieve better access to the most displaced and unstable fragments. Triangular ﬁbrocartilage injury may manifest as distal radial–ulnar joint (DRUJ) subluxation, by showing displacement of the ulna dorsally or volarly. In a true lateral X ray, the pisiform sits between the volar limits of the scaphoid and volar cortex of the capitate. With this true lateral X ray, the distal ulna sits in the dorsal half of the radius, with the dorsal cortices colinear (5).

& SURGICAL TECHNIQUE & Goals and Principles The goals of treatment of distal radius fractures include: (i) restoration of the articular surface, (ii) realignment of the

134 & Capo et al.

FIGURE 1 The proximal ﬁxator pins are placed through one open incision. The pins are placed between the tendons of the radial wrist extensors. The superﬁcial radial nerve can be seen volar to this interval. Source: Courtesy of John T. Capo, MD.

articular platform in space, with appropriate volar tilt and radial inclination, (iii) promote adequate healing, (iv) ensure a stable and reduced DRUJ, and (v) to maintain adequate ﬁnger and elbow ROM. It also must be remembered that the distal radius has two chondral surfaces that must be aligned: the radiocarpal joint with the scaphoid and lunate facets, and the sigmoid notch that articulates with the distal ulna.

External ﬁxator frames function by inducing ligamentotaxis across the fracture site and thereby reducing fracture fragments. Distraction alone can maintain length, neutralize forces, and reduce larger peripheral fracture fragments. However, external ﬁxation alone is often ineffective in reducing impacted central articular fragments. Flexion alone cannot restore volar tilt, as the dorsal capsular ligaments are more expansile than the volar ligaments. Indeed, excessive ﬂexion

FIGURE 2 Half pins with a 2.5-mm thread diameter are placed in the second metacarpal. The proximal pin is placed at the metaphyseal ﬂare and the distal pin is placed in the shaft. Source: Courtesy of John T. Capo, MD.

Augmented External Fixation for Distal Radius Fractures & 135

FIGURE 3 Placement of proximal and distal half pins in a 458 dorsal–radial plane. Source: Courtesy of John T. Capo, MD.

and ulnar deviation can cause acute carpal tunnel syndrome and make postoperative rehabilitation difﬁcult, as this position severely limits ﬁnger ROM.

& Operative Technique Proximal threaded half pins, 3.0 to 4.0 mm, are placed approximately one hand’s breadth proximal to the radial styloid, in a

relatively uncovered area of the radial shaft. This area is largely devoid of tendons and is just proximal to the muscles of the ﬁrst and third compartments (the extensor pollicis longus, extensor pollicis brevis, and abductor pollicis longus). A single 2- to 3-cm incision should be used for both proximal pins, and care taken to identify and protect the tendons and the superﬁcial branch of the radial nerve. Percutaneous incisions should be avoided as this places these structures at risk. The extensor carpi radialis longus (ECRL) and extensor carpi radialis brevis interval is

FIGURE 4 Excessive wrist ﬂexion is inappropriately placed in this distal radius fracture case. The wrist should be placed in neutral alignment to promote ﬁnger ROM and rehabilitation. Abbreviation: ROM, range of motion. Source: Courtesy of John T. Capo, MD.

136 & Capo et al. (A)

(B)

FIGURE 5 (A) AP view of distal radius fracture treated with augmented external ﬁxation. The carpus is reduced on the distal radius and there is no over-distraction at the radiocarpal or midcarpal joints. (B) Lateral view of another distal radius fracture showing neutral alignment of the wrist and hand. Abbreviation: AP, anterior–posterior. Source: Courtesy of John T. Capo, MD.

FIGURE 6 Over-distraction of the carpus in this distal radius fracture demonstrates distal translation of the scaphoid which indicates an associated scapho-lunate ligament tear. Source: Courtesy of John T. Capo, MD.

utilized. This is slightly more dorsal than the brachioradialis– ECRL interval, and thus lies further away from the superﬁcial branch of the radial nerve. Also this interval provides a tendon buffer on either side of the pins and provokes less nerve irritation (Fig. 1). The wrist extensors are immobilized by the frame and thus there is little tendon excursion in this interval. Distal pins placed in the hand should have a smaller thread diameter (2.5 mm) to help avoid fracturing the metacarpal. These are placed in the proximal metaphyseal ﬂare and shaft of the second metacarpal (Fig. 2). Open pin placement is again used to avoid injuring the ﬁrst dorsal interosseous muscle and terminal branches of the superﬁcial radial nerve. In addition, pins should not be transﬁxed into the third metacarpal as this may damage the motor branch of the ulnar nerve. Both sets of pins should be bicortical and placed 458 in the radial–dorsal plane. Placing the frame in this plane allows full retropulsion of the thumb and aids in achieving unobstructed lateral X rays (Fig. 3). Next, all the skin incisions at the pin sites are closed with nylon sutures. This is easier now than at the close of the procedure where spanning bars and other exposed hardware make closure tedious. The pin clamps are next placed on the half pins at an appropriate level and tightened. The fracture must next be reduced. It is tempting to apply excessive volar ﬂexion and ulnar deviation in an attempt to reduce the fracture deformity (Fig. 4). However, this extreme degree of positioning does not effectively induce ﬂexion of the distal fragment and may result in elevated carpal tunnel pressures (6,7). It is more effective to induce traction and palmar translation of the carpus. In addition, ulnar deviation

Augmented External Fixation for Distal Radius Fractures & 137 (B) (A)

(C)

(D)

FIGURE 7 (A) AP and (B) lateral views of an open, severely comminuted and displaced distal radius fracture. (C) AP and (D) lateral X rays showing initial stabilization of an external ﬁxator. The distal most proximal pin is near the fracture site which may interfere with future plate placement. Abbreviations: AP, anterior–posterior. Source: Courtesy of John T. Capo, MD.

should not exceed 208, as this may place excessive strain on the triangular ﬁbrocartilage complex. Distal radius fractures often require additional ﬁxation methods after placement of the external ﬁxator. The addition of Kirschner (K)-wires to an external ﬁxation construct has been proven in the lab to have signiﬁcantly increased rigidity (8). This may be required if fracture reduction cannot be obtained by ligamentotaxis alone, or if an excessive, nonphysiologic position of the wrist is needed for fracture reduction. In this latter case, the ﬁxator can be utilized as a provisional reduction tool. Often the fracture requires hyperﬂexion, ulnar deviation, and signiﬁcant palmar translation. After this is achieved the reduction can be held with crossed K-wires (0.062 00 , 0.054 00 , or 0.045 00 ), one or two placed in the radial styloid and an additional pin placed in the ulnar corner of the radius. This conﬁguration with 0.062 00 K-wires has been shown to provide optimal rigidity (9). The radial-sided pins pass from straight radial to ulnar or slightly volar to dorsal, while the ulnar corner pin is placed obliquely from dorsal to volar. The radial styloid pins should be placed

through a small open incision while the dorsal ulnar pins can be placed percutaneously. Once the pins are placed, the external ﬁxator is adjusted back to a more neutral and physiologic alignment (Fig. 5). Supplemental K-wires may also be utilized as reduction joysticks to move articular fragments into anatomic position prior to ﬁnal pin positioning. At the close of the procedure, the position of the wrist and degree of distraction must be critically assessed. Flexion should not be more than 108 as this prevents power grip of the hand and can induce median nerve compression. Full passive ﬂexion of the ﬁngers into the palm should be easily achieved. If this is impossible or has signiﬁcant rebound then the distraction is excessive and needs to be reduced. This inhibition of passive ﬂexion is caused by tension on the external ﬁnger extensors and will seriously jeopardize ﬁnal ﬁnger ROM. Examination of the ﬁnal ﬂuoroscopy shot should show even distraction across all the carpal joints. There should be equal distraction seen at the midcarpal and radiocarpal joints. Excessive distraction can be displayed as distraction of

138 & Capo et al. (A)

(B)

(C)

(D)

FIGURE 8 (A) Intra-operative AP and (B) lateral X rays demonstrating restoration of the joint surface with a small volar plate and additional percutaneous wires placed in the styloid. (C,D) Radiographs at follow-up showing healing of the fracture, reduction of the carpus, and articular congruity at the distal radius. Abbreviations: AP, anterior–posterior. Source: Courtesy of John T. Capo, MD.

the scaphoid in relation to the lunate, signifying a scapholunate tear (Fig. 6). In both the AP and lateral views, the carpus should be concentrically reduced, with the lunate and scaphoid in there respective fossa.

& COMBINED ORIF TECHNIQUES An external ﬁxator can be used as one of several components in the fracture ﬁxation hardware of a distal radius fracture. This is ideal for severe high-energy fractures that have metaphyseal and articular comminution. The external ﬁxator is used to neutralize the metaphyseal fragmentation while small plates or percutaneously placed wires are used to

align and ﬁx the articular fragments. Ideally, the ﬁxator should be placed in the standard 458 dorsal–radial position. This orientation allows access for either a dorsal, volar, or radial approach. Initially, excessive traction and angulation can be applied to help align fragments provisionally. A large radial styloid fragment may be approached by a volar Henry approach or a straight lateral approach. Lunate facet fragments can be addressed through a volar–ulnar approach between the ulnar neurovascular bundle and the carpal tunnel contents, or dorsally through the third or fourth dorsal compartments. First, the articular fragments are secured, then the articular segment is attached to the shaft. At this point, the ﬁxator can be backed off to a physiologic position, while still maintaining mild distraction to unload the

Augmented External Fixation for Distal Radius Fractures & 139 (A)

(B)

(C)

FIGURE 9 (A) Lateral postoperative X ray of distal radius stabilized with an external ﬁxator demonstrating dorsal subluxations of the ulna. The patient had a prominent distal ulna and difﬁculty with forearm rotation. (B) AP X ray showing two 0.062 00 K-wires holding the reduced DRUJ. (C) Lateral view demonstrating reduction of DRUJ. Abbreviations: AP, anterior–posterior; DRUJ, distal radial–ulnar joint; K-wires, Kirschner wires. Source: Courtesy of John T. Capo, MD.

carpus from the distal radius (Figs. 7 and 8). The ﬁxator can be removed at four to ﬁve weeks for early wrist ROM with the other hardware providing adequate stability.

& STABLIZATION OF DRUJ The stability of the DRUJ should be evaluated at the close of operative ﬁxation of all wrist injuries. DRUJ instability injury occurs in up to 10% of patients with distal radius fractures and is a major source of disability following successful healing of these fractures (10). The DRUJ is assessed with the elbow placed on the hand table and ﬂexed at 908. The radius and hand are stabilized and the ulna is stressed volarly and dorsally. This maneuver is done in neutral rotation and again in full pronation and supination. If there is abnormal translation or a signiﬁcant click or sense of subluxation, the DRUJ must be stabilized. If the DRUJ can easily be reduced it can be stabilized in several ways. It can be ﬁxed with percutaneous ulnoradial pins (Fig. 9) or by inclusion of the ulna in the external ﬁxator construct with an extension bar (Fig. 10). A large associated ulnar styloid can be ﬁxed with a screw or tension band technique. If radioulnar instability is not treated at initial injury, chronic subluxations ensues and usually requires open reduction and ligament reconstruction for treatment (10).

& AFTERCARE Pin track irritation and infection may occur. The importance of daily pin care must be reinforced to patients. Caregivers responsible for elderly or inﬁrmed patients must also understand the importance of compliance with pin care. After the ﬁrst post-op dressing change, twice daily cleaning with onehalf strength hydrogen peroxide is initiated. Daily ROM exercises are also important. Occupational therapy is used in approximately two-thirds of our patients. The decision for

therapy is usually made in the ﬁrst two weeks after ﬁxation. External ﬁxation across the wrist should allow for complete ﬁnger ROM. Digital stiffness must be avoided as this is very difﬁcult to treat chronically. Elbow ﬂexion and extension and limited forearm rotation should also be initiated if there is no associated instability of the elbow or DRUJ (Fig. 11). The functional goal is to have complete digital and elbow ROM at the time of ﬁxator removal. Augmented ﬁxation can also be beneﬁcial during the postoperative course. With the presence of dual ﬁxation, either the ﬁxator or K-wires can be removed earlier if they become problematic. This can be especially helpful in the presence of a pin tract infection or in order to initiate early ROM therapy.

& COMPLICATIONS The complication rate associated with external ﬁxation of distal radius fractures can be quite high, ranging from 20% to 85% (11–15). The majority of complications are minor pin track infections and transient neuropraxias. Wrist stiffness is often associated with external ﬁxation, but usually is a function of the injury and not the ﬁxator. However, more serious complications can occur. These primarily consist of tendon irritation and rupture, loss of fracture reduction, and complex regional pain–like syndromes (CRPS). Most superﬁcial pin track infections can be treated with meticulous pin care and oral antibiotics. However, occasionally pin tract infections require debridement or pin removal. In such cases, the presence of augmentation such as K-wires can be very valuable for maintaining the reduction. The rate of pin track infections, both superﬁcial and deep, is about 20% (11,15,16). Some have advocated delaying surgery 7 to 10 days prior to pin placement to allow swelling to subside and potentially decrease the rate of pin tract infections (4).

140 & Capo et al. (A)

(B)

(C)

(D)

FIGURE 10 (A) AP and (B) lateral view of a comminuted distal radius fracture. (C) Postoperative X ray showing stabilization of fracture with volar plating, dorsal pin ﬁxation, and an external ﬁxator. (D) The external ﬁxator construct is extended to the ulnar shaft with an outrigger bar to stabilize the DRUJ. Abbreviations: AP, anterior–posterior; DRUJ, distal radial–ulnar joint. Source: Courtesy of John T. Capo, MD.

Rates of neuritis and CRPS of 10% to 22% have been reported (11,12,14). It is unclear if these nerve injuries are from the initial trauma, or a complication of the treatment. It seems the incidence of nerve irritation may be signiﬁcant (14) but the occurrence of a true CRPS is rare. Open half pin placement is helpful in minimizing iatrogenic nerve injury. Kaempffe and Walker (17) have suggested a causal relationship between ﬁxator carpal distraction and postoperative ROM deﬁcits. This often quoted study, however, did not demonstrate a statistically signiﬁcant effect of distraction on outcome. Only duration of external ﬁxation was statistically correlated with decreased wrist ROM. We have analyzed 21 patients, two years after external ﬁxation for moderate and severe distal radius fractures. The clinical results demonstrated 10 excellent, 7 good, 4 fair, and no poor outcomes according to the Gartland and Werley classiﬁcation. Grip strength averaged 83% of the contralateral side, and ROM showed ﬂexion of 628, extension of 568, and a 1548 arc of rotation. The amount of distraction, as measured by the

carpal height index was assessed and related to ﬁnal clinical outcome. We found no adverse effects on wrist ﬂexion extension or rotation with ﬁxator distraction. It appears that stiffness in injuries treated by external ﬁxation is more a function of the injury rather than the distraction induced by the ﬁxator.

& OUTCOMES The biomechanics of augmented external ﬁxation has been studied by Wolfe (8). These authors compared osteotomized distal radii stabilized with an external ﬁxator alone or combined with various K-wire conﬁgurations. Both standard fracture transﬁxion wires combined with an external ﬁxator, and a ﬁxator with and an “outrigger” wire placed into the distal fragment and secured to the external ﬁxator were superior to external ﬁxation alone in reducing fracture motion. A single wire across the fracture site was enough to gain appreciable stability, and additional wires did not improve stability further.

Augmented External Fixation for Distal Radius Fractures & 141 (A)

(B)

FIGURE 11 (A) Clinical photograph demonstrating full elbow extension and (B) ﬂexion of patient with a distal radius fracture treated with an external ﬁxator. Source: Courtesy of John T. Capo, MD.

Dunning et al. (18) studied augmented external ﬁxation in distal radius fractures by generating simulated ﬁnger and forearm motions in cadavers. The extremeties were stabilized using spanning external ﬁxation with or without radial styloid pins, or with a dorsal distal radius plate. The results demonstrated that supplemental K-wires signiﬁcantly reduce fracture fragment motion when compared with external ﬁxation alone. The stability imparted by the augmented ex-ﬁx construct approached that reached with the dorsal plating technique. Harley et al. (14) performed a prospective randomized study comparing augmented external ﬁxation versus casting combined with percutaneous pinning for unstable distal radius fractures. Forty-one patients were followed for six months.

The authors noted no difference in clinical outcome between the two groups, although they did note percutaneous pins and casting were more likely to result in articular gaps and defects. There was also a deﬁnite trend toward more frequent pin tract infections, CRPS, and nerve injuries in the external ﬁxator group. The external ﬁxator group had no signiﬁcant difference in postoperative ROM. Werber et al. (12) performed a randomized, prospective study comparing external ﬁxation of distal radius fractures using the standard four-pin technique to a ﬁve-pin external ﬁxator that included an additional pin placed in the radial styloid and attached to the ﬁxator. Fifty patients were evaluated at least six months postoperatively. The authors found that the ﬁve-pin ﬁxator was signiﬁcantly better at

142 & Capo et al.

reduction of the fracture and in maintenance of the anatomic parameters. There was no difference in articular step-off between the groups. The ﬁve-pin group had a better clinical outcome with better ROM, and grip strength when compared with the four-pin group.

3.

& SUMMARY

5.

Distal radius fractures are ubiquitous and are seen in all age groups from children to the elderly. Today, the choice of options for surgical treatment of distal radius fractures is wide ranging. With the popularity of locked plating, typically through a volar approach, the external ﬁxator is now used less frequently. However with the advent of newer low proﬁle designs in combination with supplementary pins, screws, or small plates, the utility of external ﬁxators has increased. The principles of anatomic articular reduction, minimal softtissue trauma, and early ROM must be strictly adhered to ensure optimal results (19).

& SUMMATION POINTS

Indications & & &

Extra-articular distal radius fractures with signiﬁcant displacement. Intra-articular fractures with large fragments that can be reduced with percutaneous or limited open means. Open fractures with complex open wounds and softtissue injury.

Complications & & &

Pin sight irritation and infection. Inadequate reduction of articular surface. Over-distraction resulting in digital stiffness and median nerve irritation.

Outcomes & & &

Stable ﬁxation with early return to function. Limited soft-tissue injury with surgery. Excellent and good results in O85% of patients.

& REFERENCES 1. 2.

Alffram PA, G’doran CHB. Epidemiology of fractures of the forearm. J Bone Joint Surg 1962; 44A:105–14. Cohen MS, McMurtry RY, Jupiter JB. Fractures of the distal radius. In: Browner BD, Jupiter JB, Levine AM, Trafton PG, eds. Skeletal

4.

6. 7. 8. 9. 10. 11. 12.

13. 14.

15. 16. 17. 18.

19.

Trauma: Basic Science, Management and Reconstruction., Vol. 2. Philadelphia, PA: WB Saunders, 2003:1315–61. Edwards GS. Intra-articular fractures of the distal part of the radius treated with a small AO external ﬁxator. J Bone Joint Surg 1991; 73A(8):1241–50. Zanotti RM, Louis DS. Intra-articular fractures of the distal end of the radius treated with an adjustable ﬁxator system. J Hand Surg 1997; 22A(3):428–40. Capo JT, Accousti K. The Effect of Rotational Malalignment on Radiographs of the Wrist. Scientiﬁc Presentation, ASSH Annual Meeting, 2002. Gausepohl T, Pennig D, Mader K. Principles of external ﬁxation and supplementary techniques in distal radius fractures. Injury 2000; 31(1):56–70. Bartosh RA, Saldana MJ. Intra-articular fractures of the distal radius: a cadaveric study to determine if ligamentotaxis restores radiopalmar tilt. J Hand Surg 1990; 15A:18–21. Wolfe SW, Swigart CR, Grauer J. Augmented external ﬁxation of distal radius fractures: a biomechanical analysis. J Hand Surg 1998; 23A(1):127–34. Naidu SH, Capo JT, Ciccone W. Percutaneous pin ﬁxation of distal radius fractures: a biomechanical study. J Hand Surg 1997; 22A(2):252–7. Geissler WB, Fernandez DL, Lamey DM. Distal radioulnar joint injuries associated with fractures of the distal radius. Clin Orthop 1996; 327:135–46. Cannegieter DM, Juttmann JW. Cancellous grafting and external ﬁxation for unstable Colles’ fractures. J Bone Joint Surg 1997; 79B(3):428–32. McQueen MM. Redisplaced unstable fractures of the distal radius: a randomized, prospective study of bridging versus non-bridging external ﬁxation. J Bone Joint Surg 1998; 80B(4):665–9. Tapio F, Jukka R, Pekka H, et al. Nonbridging external ﬁxation in the treatment of unstable fractures of the distal forearm. Arch Orthop Trauma Surg 2003; 123:349–52. Harley BJ, Scharfenberger A, Beaupre LA, et al. Augmented external ﬁxation versus percutaneous pinning and casting for unstable fractures of the distal radius—a prospective randomized trial. J Hand Surg 2004; 29(5):815–24. Sanders RA, Keppel FL, Waldrop JI. External ﬁxation of distal radial fractures: results and complications. J Hand Surg 1991; 16A(3):385–91. McQueen MM, Michie M, Court-Brown CM. Hand and wrist function after external ﬁxation of unstable distal radial fractures. Clin Orthop 1992; 285:200–4. Kaempffe FA, Walker KM. External ﬁxation for distal radius fractures: effect of distraction on outcome. Clin Orthop 2000; 380:220–5. Dunning CE, Lindsay CS, Bicknell RT, et al. Supplemental pinning improves the stability of external ﬁxation in distal radius fractures during simulated forearm motion. J Hand Surg 1999; 24A(5):992–1000. Behrens FF. General theory and principles of external ﬁxation. Clin Orthop 1989; 241:15–23.

18 Non-Bridging External Fixation of the Distal Radius Margaret M. McQueen

Royal Inﬁrmary of Edinburgh, Edinburgh, Scotland, U.K.

& INTRODUCTION Distal radius fractures are extremely common injuries occurring mostly as low-energy extra-articular or minimal articular fractures in middle-aged to elderly women but with a small peak of incidence also in young men with higher energy injuries that tend to be intra-articular (1). Most stable distal radial fractures can be treated in a cast. Instability of the distal radius, deﬁned as either demonstrated or predicted inability to retain the reduced radiological position in a cast or articular displacement, are considered indications for surgical treatment of distal radial fractures in independent patients regardless of age. A number of surgical techniques are possible in this situation, including nonbridging external ﬁxation. This method employs pins in the distal fragment and radius proximal to the fracture, thus not bridging either the radiocarpal, intercarpal, or carpometacarpal joints. The ﬁrst recorded use of external ﬁxation in the wrist was reported by Ombre´danne who used a nonbridging technique for fractures and osteotomies of the forearm in children in 1929. Ombre´danne concluded that “temporary osteosynthesis with external connection allows a mathematical adjustment of the surgical correction . and guarantees further retention with ample and sufﬁcient precision” (2). For about 60 years, this sensible conclusion was largely ignored with surgeons concentrating on bridging external ﬁxation ﬁrst introduced by Anderson and O’Neil in 1944 (3). At that time, external ﬁxation was generally used for severely comminuted intra-articular fractures of the distal radius in young men in whom nonbridging external ﬁxation may not have been an option. Interest in the technique did not revive until the 1990s, possibly because of increasing numbers of healthier, elderly patients with low-energy fractures, who unlike previous generations, were not prepared to accept malunion and possible functional deﬁcit and in whom nonbridging external ﬁxation was a feasible option.

& INDICATIONS It is now generally agreed that malunion of a fracture of the distal radius, whether metaphyseal or intra-articular, is likely to lead to functional deﬁcit leading to difﬁculty with the normal activities of daily living (4–7). Metaphyseal instability of the distal radius, whether demonstrated or predicted, in the ﬁt patient is the most common indication for treatment with nonbridging external ﬁxation to prevent malunion. Nonbridging external ﬁxation should be used in preference to bridging external ﬁxation whenever possible because of the improved radiological and functional results that have been demonstrated (8–10). Nonbridging techniques are indicated for extra-articular dorsally displaced fractures with metaphyseal instability. The technique is not suitable for the treatment of volar displaced fractures. Most unstable fractures of the distal radius with

minimal or undisplaced articular extension can also be successfully treated using this technique. Fewer cases with displaced articular extensions are suitable for nonbridging ex ﬁx as after ﬁxation of the joint surface they may lack the necessary space in the distal fragment for the distal pins. However, the use of multiplanar wires both to reduce and hold the articular fragments and to hold the metaphyseal alignment in a hybrid-type construct of nonbridging external ﬁxation was recently reported as a good treatment option for articular fractures (11). Nonbridging external ﬁxation is also indicated as a minimally invasive technique for corrective osteotomy of the distal radius for the treatment of symptomatic malunion. The main contraindications for the technique of nonbridging external ﬁxation is lack of space for pins in the distal fragment: approximately 1 cm of intact volar cortex is required to allow purchase for the pins. Dorsal comminution is not a contraindication for the technique as the pins achieve their grip on the volar cortex but severe articular comminution may preclude pin placement in the distal fragment. As in any other technique for the management of unstable distal radius fracture, nonbridging external ﬁxation is not recommended for the frail elderly dependent patient. With such patients, the fracture should be managed in a cast and malunion accepted (12). However, osteoporosis in the ﬁt patient is not a contraindication as ﬁxation failure is rare (8,11,13,14). As with any external ﬁxation technique, insertion of pins through areas of possible skin infection is also contraindicated. The indications for nonbridging external ﬁxation of the distal radius do not differ signiﬁcantly from the indications for the comparable open technique of either dorsal or volar plating. However, plating techniques frequently require a second operation for implant removal, which may be a relative contraindication in patients with signiﬁcant comorbidities.

& CONSIDERATIONS FOR PREOPERATIVE PLANNING The technique of nonbridging external ﬁxation for fracture of the distal radius is simple and requires minimal preoperative planning. Physical examination should include assessment of neurological function in the hand, since in the presence of carpal tunnel syndrome decompression should be added to the surgical procedure. Evidence of complex regional pain syndrome type I should be noted but is not a contraindication for the technique. Examination of the skin in the area is required to exclude local infection. The mainstay of preoperative imaging is a good series of preoperative ﬁlms with true anteroposterior (AP) and lateral views of the wrist. This should allow assessment of the size of the distal fragment. On the lateral view, the volar cortex should be seen clearly: 1 cm of intact volar cortex is required. The AP view also allows assessment of the size of the fragment. Beware of the distal fragment that narrows toward the distal radioulnar

144 & McQueen

joint on the AP view forming a triangle with the radial styloid at its apex. This conﬁguration may not allow sufﬁcient purchase for an ulnar-sided pin. Unless the fracture has redisplaced after initial closed reduction, the likelihood of instability should also be assessed on the preoperative plain ﬁlms to establish the indication for stabilization. Radiological factors increasing the risk of instability are the presence of metaphyseal comminution, increasing radial shortening, and increasing initial dorsal angulation (15). No special preoperative planning is required for the use of nonbridging external ﬁxation in distal radial osteotomy. In this situation, the size of the distal fragment is determined by the placement of the osteotomy cut. The desired angle of correction may be estimated preoperatively but can easily be adjusted peroperatively by using the pins as a joystick. More advanced imaging is not usually necessary unless the nonbridging technique is to be used for severe articular fractures when computed tomography scanning may be required to visualize the articular fracture pattern and to plan placement of hybrid-type pins.

& SURGICAL TECHNIQUE Axillary or supraclavicular regional block is recommended as there is some evidence that the use of this technique will reduce

the incidence of complex regional pain syndrome type I (16). The patient is placed supine with the affected arm extended on the hand table and the wrist in neutral rotation. A tourniquet is applied to the upper arm. The surgeon is seated on the cephalic side of the arm table and the C-arm is positioned on the opposite side. Fracture reduction prior to insertion of the pins is not necessary.

& Acute Fractures The distal pins are inserted ﬁrst from dorsal to volar, midway between the fracture site and the radiocarpal joint, and on either side of Lister’s tubercle. If there is an undisplaced sagittal, articular fracture pins should be placed on both the radial and ulnar sides of the articular extension. Lister’s tubercle may be palpable in cases with minimal swelling and gives a good indication of the approximate level of pin entry. The exact placing will be determined by the type of ﬁxator used, but in those with two parallel distal pins, the ulnar-sided pin should be inserted ﬁrst into the ulnar corner of the distal radius. A marker is placed on the skin and its position in relation to the entry point on bone conﬁrmed on a lateral and AP view of the wrist (Figs. 1 and 2). A 1-cm longitudinal incision is made at this point and the extensor retinaculum visualized. A longitudinal incision is made in the retinaculum under direct vision with care taken not to damage any underlying tendons. The

FIGURE 1 An anteroposterior view of the distal radius showing the ideal placement of a ﬁxator pin in the ulnar corner of the distal radius. The patient had a concomitant scaphoid fracture ﬁxed with a screw.

Non-Bridging External Fixation of the Distal Radius & 145

FIGURE 2 A lateral view of the distal radius demonstrating the starting point for a ﬁxator pin, midway between the fracture and the joint.

underlying bone is then exposed. A ﬁxator pin is placed on the bone and the position conﬁrmed on the image intensiﬁer. The pin is then adjusted so that its projected course is parallel to the radiocarpal joint on the lateral view. The pin is then inserted by hand until its tip penetrates the volar cortex (Fig. 3). Predrilling is not necessary. Further pins may then be inserted using the same technique; the spacing and relationship of the pins will be determined by the ﬁxator used. Pins are then placed in the radial diaphysis proximal to the fracture. These should be as close as possible to the fracture to allow as small a ﬁxator construct as possible. Open pin placement is mandatory to avoid damage to the dorsal branch of the radial nerve. A longitudinal skin incision is used over the dorsum of the radius followed by blunt dissection to expose the tendons of extensor carpi radialis longus and extensor carpi radialis brevis. The natural interval between these tendons is developed to expose the radius. The proximal pins are then inserted by hand with or without predrilling and should engage both cortices of the radius. The ﬁxator should then be assembled but not tightened. Reduction of the fracture is then achieved using the distal pins as “joysticks” (Fig. 4). In a fresh fracture, this requires very little force. Where reduction has been delayed, forcible reduction should not be attempted as this may cause pin loosening. In late cases, gradual reduction should be employed and is usually possible up to around

three weeks after fracture. Should reduction not be possible without undue force a small incision should be made over the dorsum of the fracture and a lever inserted to reduce the fracture by direct means. The ﬁxator is then tightened and the reduction conﬁrmed using the image intensiﬁer.

& Distal Radial Osteotomies Use of a nonbridging external ﬁxator for distal radial osteotomy allows minimal soft tissue dissection. A 2.5-cm transverse skin incision is made over the site of deformity. The extensor retinaculum is then divided longitudinally and the radius exposed between the third and fourth extensor compartments. The level of the osteotomy is identiﬁed. Distal pins are then inserted through two separate incisions using the same technique as described for acute fractures and are placed between the level of the planned osteotomy site and the radiocarpal joint. An osteotomy cut is then made with a small saw parallel to the pins and as far as but not through the volar cortex. An osteotome is then inserted into the osteotomy cut and the volar cortex cracked by creating an open wedge dorsally. Proximal pin insertion is performed using the same technique as for acute fractures. The distal pins can then be used to allow accurate positioning of the distal fragment. The wedgeshaped defect in the distal radius is ﬁlled with cancellous bone

146 & McQueen

FIGURE 3 The pin has been inserted by hand. Note that the pin penetrates the volar cortex.

harvested from the iliac crest (Fig. 5). The transverse incision is closed but the pin track incisions are left open. Postoperative management is the same for both fractures and osteotomies. Pin tracks are not closed but are treated with dressings that are initially changed daily, but then twice weekly, provided the pin tracks are satisfactory. Hand and wrist movements are encouraged and no form of immobilization is used. The ﬁxator is removed in the majority of cases at ﬁve to six weeks. Occasionally, in the presence of associated diaphyseal comminution, a longer period is required until diaphyseal healing is evident radiologically.

of nonbridging external ﬁxation of the distal radius is pin track infection, which is reported to occur in 9% to 33% of cases (8,11,13,14,17). Fortunately, the vast majority are minor infections that are treated with antibiotics and increased frequency of dressings. Extensor pollicis longus rupture or irritation occurs in less than 5% of cases (8,11,13,18). This is a similar rate to distal radial fractures treated by different methods (1), but much less than the more invasive technique of dorsal plating in which high rates of extensor tendon rupture or irritation are reported (19,20). Rates of other fracture-related complications are not affected by the use of nonbridging external ﬁxation.

& COMPLICATIONS There are few perioperative pitfalls. One which may be encountered per-operatively is over-reduction of the fracture (Fig. 6), especially if there is bayoneting of the volar cortex. This should be easily recognized on the image intensiﬁer views and is therefore a preventable complication. If insertion of distal pins proves unsuccessful because of insufﬁcient intact volar cortex, then it is simple to convert the construct to a bridging construct with or without augmentation. Aseptic pin track loosening or pullout is rare even in osteoporotic bone. However, the most common complication

& OUTCOMES & Fractures Radiological outcomes of nonbridging external ﬁxation for extra-articular or minimal articular fractures are uniformly good (Table 1). The ﬁrst report of nonbridging external ﬁxation with anatomical results was a comparison of plaster versus nonbridging external ﬁxation in patients under 60 years of age with displaced distal radial fractures. The quality of the reduction was good in both groups, but the reduced position

Non-Bridging External Fixation of the Distal Radius & 147 (A)

(A)

(B) (B)

FIGURE 4 (A) Two pins have been inserted. The fracture is unreduced. (B) The fracture has been reduced using the joystick technique.

FIGURE 5 A postoperative anteroposterior (A) and lateral (B) view following corrective osteotomy of the distal radius using nonbridging external ﬁxation. Note the bone graft in the defect which is clearly seen on the lateral view.

148 & McQueen

FIGURE 6 A lateral view of the distal radius showing overreduction of the same fracture as in Figures 1–4. There is excessive volar tilt.

was maintained better (p!0.01) by the external ﬁxation group (21). The ﬁrst randomized study of nonbridging external ﬁxation was a comparison with bridging external ﬁxation. Sixty patients with redisplaced distal radial fractures and an average age of 61 years were included. Nonbridging external ﬁxation showed statistically signiﬁcant improvement in both dorsal angle and radial shortening at all stages of review, successfully maintaining volar tilt until ﬁnal review at one year (8). There were no malunions in the nonbridging group in this study. Thus, the main radiological advantage of nonbridging external ﬁxation is restoration and maintenance of the normal volar tilt of the distal radius. In bridging external ﬁxation, reduction of the fracture depends on ligamentotaxis. Volar tilt may not be restored because the volar ligaments are shorter and stronger than the dorsal ligaments and prevent full reduction (23). With nonbridging external ﬁxation, the reduction is performed using the distal pins as joysticks, allowing the surgeon direct control of the distal fragment and obviating the need for ligamentotaxis. Superior functional outcomes are also reported in nonbridging external ﬁxation for acute fractures of the distal radius compared to bridging techniques (8). In this study, the nonbridging group grip strength was restored to 87% of the opposite

normal side, allowing for appropriate hand dominance. Other indices of function also showed superior results in the nonbridging group. The outcomes when nonbridging external ﬁxation is used for multifragmentary articular fractures are less optimal. Table 1 shows a summary of the reports available in the literature on nonbridging external ﬁxation. In extra-articular and minimal articular fractures, functional results are excellent. The only exception to that rule is when the technique is used for severe articular fractures when it is likely that the severity of the injury dictates the outcome (22). There have as yet been no randomized studies comparing nonbridging external ﬁxation with the more invasive technique of plating for the management of unstable distal radius fractures. Volar locked plating has been introduced recently for unstable distal radius fractures in the hope that ﬁxed angle devices would confer more stability in osteoporotic bone, and that compared to dorsal plating there would be less soft tissue irritation and therefore less need for implant removal. The technique is more invasive than nonbridging external ﬁxation and has been widely used with very limited data available on its outcome. One of the ﬁrst reports of the technique was on 50 fractures treated with a volar locked plate in patients with a mean age of 62 years (24). In 21 of their fractures, the postoperative reduction

Non-Bridging External Fixation of the Distal Radius & 149 TABLE 1 Published Outcomes of Nonbridging External Fixation for Fracture of the Distal Radius

Jenkins (1987) (21) nZ32 McQueen (1998) (8) nZ30 Krishnan et al. (1998) (17) nZ22 McQueen et al. (1999) (13) nZ20 Krishnan et al. (2003) (22) nZ30 Flinkkila et al. (2003) (18) nZ52 Gradl et al. (2005) (11) nZ25

Fracture type

Malunion

Extra-articular/nonarticular Extra-articular/non articular Intra-articular Extra-articular/non articular Intra-articular Extra-articular/non articular Extra-articular Severe articular

2 0 0 1 N/R 2 1

Function N/A Grip strength 87% 29/30 excellent/good Grip strength 88% Grip strength 45% Grip strength 90% 96% excellent

Major PTI

EPL rupture

0 0 2 1 0 1 2

0 2 0 0 3 0 0

Abbreviations: EPL, extensor pollicis longus; N/R, not reported; PTI, pin track infection.

deteriorated by the ﬁnal review, and in four there was sufﬁcient collapse of the fracture to allow penetration of the radiocarpal joint by the distal screws. The authors suggested that in patients with signiﬁcant osteoporosis bone grafting may be required to augment the ﬁxation, thus increasing the invasive nature of the technique. A more recent study has also shown a concerning rate of fracture collapse (10%), especially in patients with severe comminution (25). There also remains a signiﬁcant rate of secondary surgery for implant removal due to either ﬂexor tendon problems from the plate or extensor tendon irritation or rupture due to screw penetration dorsally (24,25). Randomized studies are required to compare this technique with established techniques including nonbridging external ﬁxation.

fractures should be deﬁned more clearly. There is also the opportunity to develop lighter and lower proﬁle components that are fully radiolucent in order to maximize function for the patient while the ﬁxator is in place.

& SUMMATION POINTS

Indications & & &

& Osteotomy Little is reported on the use of nonbridging external ﬁxation for distal radial osteotomy. A series of 23 patients were treated in the author’s institution with nonbridging external ﬁxators for symptomatic malunion of the distal radius. There were statistically signiﬁcant improvements in both dorsal angulation and radial shortening, with dorsal angulation improving from a mean of 18.68 to a mean volar tilt of 6.58 at ﬁnal review. All functional measures were statistically signiﬁcantly improved at ﬁnal review compared with preoperative levels except wrist extension and key grip strength. The only major complications were two patients with extensor pollicis longus ruptures. Radial osteotomy with nonbridging external ﬁxation provides a minimally invasive technique for distal radial osteotomy with reliable radiological and functional results.

& SUMMARY Nonbridging external ﬁxation of the distal radius for metaphyseal unstable fractures is a simple minimally invasive technique that allows the surgeon to obtain and maintain an excellent reduction. Functional results are generally very satisfactory with a rapid return to function and good long-term function. Nonbridging external ﬁxation has been shown to be superior to bridging external ﬁxation in the treatment of unstable distal radius fractures. The technique has not been directly compared to either dorsal or volar plating but is likely to have less fracture collapse, fewer tendon problems, and therefore less secondary surgery.

Unstable extra-articular and minimal intra-articular fractures of the distal radius Severe articular fractures of the distal radius (using multiplanar K-wires) Minimally invasive technique for distal radial osteotomy for symptomatic malunion of the distal radius

Outcomes & &

Few malunions Rapid rehabilitation and excellent long-term function

Complications & &

Minor pin track infections Iatrogenic volar malunion

& REFERENCES 1.

2. 3. 4. 5. 6. 7.

& FUTURE DIRECTION

8.

Prospective randomized studies are required to compare nonbridging external ﬁxation with plating, especially locked volar plating, for unstable extra and minimal articular fractures of the distal radius. The use of the technique in severe articular

9.

McQueen MM. Fractures of the distal radius and ulna. In: CourtBrown CM, McQueen MM, Tornetta P, eds. Orthopedic Surgery Essentials: Trauma. Philadelphia, PA: Lippincott Williams and Wilkins, 2006:153–69. Fernandez DL, Fleming MC. History, evolution and biomechanics of external ﬁxation of the wrist joint. Injury 1994; 25(Suppl. 4): S-D 1–-D 13. Anderson R, O’Neil G. Comminuted fractures of the distal end of the radius. Surg Gynaecol Obstet 1944; 78:434. Jenkins NH, Mintowt-Czyt WJ. Mal-union and dysfunction in Colles’ fracture: an anatomical and functional study. J Hand Surg 1988; 13B:291–3. McQueen MM, Caspers J. Colles’ fracture: does the anatomical result affect the ﬁnal function? J Bone Joint Surg 1988; 70B:649–51. Solgaard S. Function after distal radius fracture. Acta Orthop Scand 1988; 59:39–42. McQueen MM, Hajducka C, Court-Brown CM. Redisplaced unstable fractures of the distal radius: a prospective randomised comparison of four methods of treatment. J Bone Joint Surg 1996; 78B:404–9. McQueen MM. Redisplaced unstable fractures of the distal radius. A randomised prospective study of bridging versus non-bridging external ﬁxation. J Bone Joint Surg 1998; 80B:665–9. Uchikura C, Hirano J, Kudo F, Satomi K, Ohno T. Comparative study of nonbridging and bridging external ﬁxators for unstable distal radius fractures. J Orthop Sci 2004; 9:560–5.

150 & McQueen 10. Bednar DA, Al-Harran H. Non-bridging external ﬁxation for fractures of the distal radius. J Can Chir 2004; 47(6):426–30. 11. Gradl G, Jupiter JB, Gierer P, Mittlmeier T. Fractures of the distal radius treated with a nonbridging external ﬁxation technique using multiplanar K wires. J Hand Surg 2005; 30A:960–8. 12. Beumer A, McQueen MM. Fractures of the distal radius in lowdemand elderly patients: closed reduction of no value in 53 of 60 wrists. Acta Orthop Scand 2003; 74:98–100. 13. McQueen MM, Simpson D, Court-Brown CM. Metaphyseal external ﬁxation of redisplaced unstable distal radial fractures. Use of the Hoffman 2 compact external ﬁxator. J Orthop Trauma 1999; 13:501–5. 14. Fischer T, Koch P, Saager C, Kohut GN. The radio-radial external ﬁxator in the treatment of fractures of the distal radius. J Hand Surg 1999; 24B(5):604–9. 15. Mackenney P, McQueen MM, Elton R. Prediction of instability in distal radial fractures. J Bone Joint Surg (Am) 2006; 88A:1944–51. 16. Reuben SS, Pristas R, Dixon D, Faruqh S, Madabhushi L, Werner S. The incidence of CRPS after fasciectomy for Dupuytren’s contracture: a prospective observational study of from anaesthetic techniques. Anaesth Analg 2006; 102:499–503. 17. Krishnan J, Chipchase LS, Slavotinek J. Intraarticular fractures of the distal radius treated with metaphyseal external ﬁxation. J Hand Surg 1998; 23B:396–9.

18. Flinkkila T, Ristiniemi J, Hyvonen P, Hamalainen M. Nonbridging external ﬁxation in the treatment of unstable fractures of the distal forearm. Arch Orthop Trauma Surg 2003; 123:349–52. 19. Rozental TD, Beredjiklian PK, Bozentka DJ. Functional outcome and complications following two types of dorsal plating for unstable fractures of the distal part of the radius. J Bone Joint Surg 2003; 85A:1956–60. 20. Herron M, Faraj A, Craigen MA. Dorsal plating for displaced intraarticular fractures of the distal radius. Injury 2003; 34:497–502. 21. Jenkins NH, Jones DG, Johnson SR, Mintowt-Czyt WJ. External ﬁxation of Colles’ fractures. An anatomical study. J Bone Joint Surg 1987; 69B:207–11. 22. Krishnan J, Wigg AER, Walker RW, Slavotinekl J. Intra-articular fractures of the distal radius: a prospective randomised controlled trial comparing static bridging and dynamic non-bridging external ﬁxation. J Hand Surg 2003; 28B:417–21. 23. Bartosh RA, Saldana MJ. Intra-articular fractures of the distal radius: a cadaveric study to determine if ligamentotaxis restores radiopalmar tilt. J Hand Surg 1990; 15:18–21. 24. Drobetz D, Kutcha-Lissberg E. Osteosynthesis of distal radial fractures with a volar locking screw plate system. Int Orthop 2003; 27:1–6. 25. Rozental TD, Blazar PE. Functional outcome and complications after volar plating for dorsally displaced, unstable fractures of the distal radius. J Hand Surg 2006; 31A:359–65.

19 Spanning Plating for Distal Radius Fractures Anthony J. Lauder

Department of Orthopedic Surgery and Rehabilitation, University of Nebraska Medical Center, Omaha, Nebraska, U.S.A.

David S. Ruch

Department of Orthopedics, Duke University Medical Center, Durham, North Carolina, U.S.A.

Douglas P. Hanel

Section of Hand and Microvascular Surgery, Department of Orthopedics and Sports Medicine, University of Washington, Seattle, Washington, U.S.A.

& INTRODUCTION Initially, as described by Colles in 1814, distal radius fractures were considered entities that had universally good outcomes, deserving only benign neglect as treatment (1). Although this may occur for nondisplaced distal radius fractures that heal uneventfully, many authors have demonstrated high complication rates with conservative management of more complicated fractures (2,3). More recently, surgeons have become more aggressive in their treatment of distal radius fractures due to the recognition that good outcomes depend on the restoration of normal anatomy (4–8). Even though distal radius fractures are exceedingly common injuries, it is this restoration of normal anatomy, speciﬁcally the articular surface, which can present a signiﬁcant challenge for the treating surgeon. Furthermore, certain subsets of injuries including highenergy fractures and fractures occurring in osteoporotic bone pose particular problems. High-energy fractures with severe comminution extending into the metaphyseal–diaphyseal region and osteoporotic fractures also with comminution and poor structural support make articular surface reconstruction through open techniques a daunting task (Fig. 1). Adding to the difﬁculty with surgical treatment for these types of distal radius fractures is the fact that many of these patients present with multiple injuries. Multiple injured patients, who often need maximum use of their upper extremities to change assist with mobilization, require rigid fracture ﬁxation that dissipates weight-bearing forces while providing enough stability to allow fracture healing. Ideally, a method to treat distal radius fractures in the face of polytraumatized patients or poor bone stock would provide rigid ﬁxation, help maintain fracture reduction, require minimal postoperative nursing or patient care, be easily applied, and allow for early weight bearing. A relatively facile technique that provides the support necessary to allow early weight bearing is the spanning or internal distraction plating of the distal radius (Fig. 2). Originally described by Burke and Singer in 1998 (9), this method bypasses the injured segment with a bridge plate from the distal shaft of the radius to the shaft of the second or third metacarpals. Advantages of this technique include the following: (i) it effectively eliminates the compressive forces at the distal radius articular surface seen when non-spanning devices are utilized; (ii) it can be much cheaper than external

ﬁxators applied for similar fractures; (iii) it allows for early weight bearing and patient mobilization; (iv) it eliminates the need for pin site care and the complications that can stem from infected tracts; (v) it is indicated in severely comminuted or osteoporotic bone where proximal migration of the distal fragments would be expected with weight-bearing and nonspanning devices; and (vi) it implements indirect reduction techniques through ligamentotaxis that reduces the devascularization of fragments, which can occur with open techniques. Important disadvantages of this technique include the following: (i) it entails prolonged immobilization of the wrist during fracture healing; (ii) it requires distraction to afford a reduction that has been associated with complications (10–13); and (iii) it requires a second surgery for plate removal. Certainly many other techniques, each with advantages and disadvantages, exist for deﬁnitively treating distal radius fractures that occur in osteoporotic bone or that stem from high-energy insults. Closed reduction and percutaneous pinning, a minimally invasive technique that can be performed rapidly, provides some added stability compared to closed reduction alone. The stability added using percutaneous wires is not enough to allow for early weight-bearing or aggressive range of motion, however. External ﬁxation, another option that can be used as a supplement to Kirschner (K)-wires or by itself to treat wrist fractures, has traditionally been implemented for severely comminuted distal radius fractures. It bypasses the injured segment and can provide a very rigid construct that may allow for early weight bearing (11,14–-16). However, the use of external ﬁxation can be the source for many patient care problems and complications. Weber and Szabo noted complication rates ranging from 52% to 63% in comminuted wrist fractures treated with external ﬁxation (17). Furthermore, the external pins not only add to the nursing burden by requiring multiple cleanings each day, but also increase the risk of local infection and ﬁxator loosening (18,19). Pin tract infections and loosening may necessitate early removal of the external ﬁxator, making difﬁcult any long-term immobilization that may be desired for some high-energy injuries. Most recently, the treatment of distal radius fractures has advanced rapidly with alternative implants and techniques devised speciﬁcally for comminuted wrist fractures in single extremity injuries. These innovative designs and techniques include ﬁxed-angle plates and small plates and/or wire forms intended for fragment speciﬁc ﬁxation (20,21). These new

152 & Lauder et al. (A) (B)

FIGURE 1 (A) Anteroposterior radiograph demonstrating high-energy fracture to distal radius with severe comminution extending into the metaphyseal–diaphyseal region. (B) Lateral radiograph of the same injury.

implants are designed to be of low proﬁle and to allow multiple points of ﬁxation to help restore a stable, congruent articular surface. The thinness of the implants and the fact that many are designed for volar placement alleviate the problems with extensor tendon irritation and rupture seen frequently with bulkier implants placed dorsally (22,23). They are not without complications, however. Implant breakage, tendon irritation/ rupture, loss of ﬁxation, temporary paresthesias, and screw perforation into the articular surface are noted problems (20,24,25). Furthermore, these implants are not ideal for the multiple injured patients or the highly comminuted fractures with extension into the radial diaphysis. At this time, there is no evidence that these newer plates and/or wire forms can support the loads seen through the wrist in patients who require their upper extremities for transfers. Additionally, although the lowproﬁle volar locking plates with multiple screw options are excellent for articular reconstruction, they are not designed to provide the compression or rigidity required to adequately treat a radial diaphyseal fracture (26,27). Severely comminuted osteoporotic fractures can also be problematic for these new devices. This stems from the fact that these implants cannot neutralize the compressive forces seen at the radiocarpal joint, which can quickly lead to collapse of the weakened subchondral bone around a screw, peg, or wire form. The bridge plate, serving as an “internal ﬁxator,” has many biomechanical advantages that overcome the problems seen with other implants. In a study analyzing different external ﬁxator conﬁgurations, Behrens et al. noted that the rigidity of a construct was directly proportional to the proximity of the longitudinal ﬁxator bar to the bone and fracture site (28). Based on these ﬁndings, the bridge plate, with its direct contact to the radius and metacarpals, is the strongest possible

ﬁxator construct. Additionally, while eliminating the compressive forces seen at the radiocarpal joint, the bridge plate also serves as a dorsal buttress through its direct contact with the dorsal cortex. The importance of the dorsal contact between the plate and distal radius is underscored by a study from Bartosh and Saldana, showing that ligamentotaxis by itself was not a sufﬁcient means for restoring palmar tilt (29).

& INDICATIONS There are many situations in which the bridge plate for the distal radius might be considered ideal. Current indications include (i) high-energy injuries in polytraumatized patients where early weight bearing on the upper extremities might be necessary for transfers; (ii) osteoporotic fractures with signiﬁcant comminution that might lead to early collapse if the compressive forces at the wrist are not neutralized; (iii) high-energy fractures with extension into the metaphyseal–diaphyseal region of the distal radius; and (iv) fractures that would best be treated by bridging techniques in patients who simply refuse to accept external ﬁxation as an option. Importantly, internal distraction or bridge plating of the distal radius is not merely a substitute for external ﬁxators. Certainly, external ﬁxators should still have a place in the wrist surgeon’s repertoire, especially when there is signiﬁcant soft tissue destruction and/or loss.

& CONTRAINDICATIONS The only true contraindication to bridge plating a distal radius is a patient who, because of other injuries, cannot safely tolerate the procedure. Two relative contraindications include (i) the presence of volar fracture fragments that do not reduce with

Spanning Plating for Distal Radius Fractures & 153

& PREOPERATIVE EVALUATION

(A)

Right

(B)

As with any fracture of the distal radius, preoperative radiographic evaluation should include posteroanterior (PA), oblique, and lateral views. The PA view should be taken with the shoulder in neutral rotation and abducted 908, elbow ﬂexed 908, and the forearm ﬂat on the radiographic cassette. A true PA view is noted when the ulnar and radial styloids make up the far lateral and medial borders of the wrist on the X-ray (Fig. 3). The lateral view should be taken with the beam perpendicular to the long axis of the radial shaft. The quality of the lateral view can be assessed by the position of the pisiform relative to the distal pole of the scaphoid. In a true lateral view, the pisiform should overlap with the distal pole of the scaphoid. Any deviation from this suggests too much pronation or supination of the wrist (Fig. 4) (30). A computed tomography (CT) scan may be a useful adjunct in fractures where there is a suspected free intra-articular fragment. Typically, these fragments will not reduce with ligamentotaxis alone, and the CT can provide helpful information of fracture location, which can direct limited operative approaches to help restore joint congruity. With the fragment reduced, a spanning plate could be applied. Finally, any preoperative evaluation of a person with a high-energy fracture should include the person as a whole, realizing that the distal radius fracture may be a relatively minor part of the entire picture.

Right

FIGURE 2 (A) Anteroposterior and (B) lateral X-rays demonstrating a comminuted distal radius fracture in a patient that sustained injuries to multiple extremities. Note the supplemental Kirschner wires providing subchondral support and stabilization for smaller fragments.

distraction (these types of injuries may be better served with a volar approach and plating techniques to secure the free fragments) and (ii) injuries that result in soft tissue loss that would leave the plate exposed.

FIGURE 3 A true anteroposterior view of the wrist with the ulnar and radial styloids making up the outermost ulnar and radial portions on the radiograph.

154 & Lauder et al.

FIGURE 4 A true lateral of the wrist with the pisiform overlying the distal pole of the scaphoid (arrow).

& SURGICAL TECHNIQUE & 3.5 mm ASIF Compression Plate The patient is kept in the supine position and the affected arm is placed on a radiolucent arm board. A tourniquet is placed as high as possible on the arm. This technique, as ﬁrst described by Ruch et al. (31), requires three incisions. The ﬁrst incision, measuring approximately 4 cm in length, is made over the midshaft of the long ﬁnger metacarpal. The metacarpal is cleared of soft tissues while the extensor tendon is retracted and protected. A second incision, again measuring approximately 4 cm, is made over the dorsum of the distal aspect of the radius. Under ﬂuoroscopic guidance, this incision should be placed at least 4 cm proximal to the proximal most aspect of the fracture. Blunt dissection should be carried down to the distal radius and care must be taken to avoid injury to the superﬁcial branch of the radial nerve. After preparing the ﬁrst two incisions, palpate Lister’s tubercle and make a 2-cm incision directly over the bony landmark. Fully release the extensor pollicis longus (EPL) and retract it radially. Mobilizing the EPL facilitates both plate insertion and the application of bone graft for ﬁlling voids at the subchondral surface of the distal radius.

Plate selection should be based on the size of the patient and the proximal extent of the comminution of the distal radius fracture. Lay a 12-, 14-, 16-, or 20-hole 3.5-mm Association for the Study of Internal Fixation (ASIF) compression plate (Synthes, Paoli, Pennsylvania, U.S.A.) on the overlying skin of the wrist and use the C-arm to ensure that a minimum of three cortical screws can be placed proximal to the fracture. Starting at the distal incision direct the plate toward the proximal incisions over the distal radius. Ensure that the plate is applied beneath the extensor tendons but extra-articular to the carpus by visualizing the plate through the incision over Lister’s tubercle. Once passed to the proximal most incision, recheck, through the middle incision, that impingement has not occurred between the plate and the EPL or digital extensors. At this time, the plate should be secured distally with a screw placed in the midline of the shaft of the metacarpal. Midline placement of screw ensures that the hand will not rotate in relation to the forearm when the plate is eventually secured to the radius. Next, the radial length must be restored. Using manual traction under ﬂuoroscopic guidance, apply a serrated clamp through the proximal incision to secure the plate to the radius once an appropriate length has been obtained. Prior to securing the proximal plate with screws, full rotation of the forearm should be conﬁrmed. Furthermore, full passive motion of all the digits should be possible. If full ﬂexion is not possible, then plate impingement on the extensor tendons is likely and extrinsic extensor tightness will occur if this is not resolved. Once the surgeon is assured of full motion, the plate can be secured proximally with screws. The remaining holes overlying the metacarpal can also be ﬁlled at this time. With the plate in its ﬁnal position and radial length restored, the surgeon can now direct attention to reducing the articular surface and restoring joint congruity. Any metaphyseal defects can be bone grafted through the incision made over Lister’s tubercle. The bone graft will help elevate and buttress any articular fragments overlying the defects. Due to an increased risk of infection, bone grafting should not be performed in a grossly contaminated fracture or in injuries with soft tissue defects that preclude primary wound closure. Further buttressing of the lunate fossa can be provided with a 3.5-mm screw inserted through the mid-portion of the plate just under the subchondral bone of the lunate facet. Some fragments that require reduction may be too small for screw purchase. In this instance, 0.45 or 0.62 in. K-wires should be implemented to reduce and stabilize these fragments. This is often the case with the radial styloid and fragments from the intermediate column. Once satisﬁed with the placement of the plate and joint reduction, the surgeon needs to address the distal radioulnar joint (DRUJ). DRUJ stability should be checked in pronation, neutral, and supination, and compared with the contralateral side. If instability of the DRUJ is evident, then any large fractures of the ulnar styloid should be repaired and the forearm splinted in supination with some type of long-arm splint.

& 2.4 mm Mandibular Reconstruction Plate or Distal Radius Bridge Plate Another technique, as described by Hanel et al. (32), utilizes either a 22-hole 2.4-mm mandibular reconstruction plate (Synthes) or a 2.4-mm distal radius bridge (DRB) plate (Synthes) (Fig. 5). In this method, the plate is applied under the second dorsal compartment and secured to the index ﬁnger metacarpal distally. Similar to the prior technique, the patient is kept in the supine position and the affected extremity is centered on

Spanning Plating for Distal Radius Fractures & 155

a radiolucent arm board. Tourniquets can be used but are not necessary and are not currently implemented by the senior author (D.P.H.). Sterile mesh ﬁnger traps are applied to the index and middle ﬁngers after the completion of prepping and draping. Using a rope and pulley system, 4.5 kg of longitudinal traction should be applied and an initial closed reduction performed (Fig. 6). After the initial setup is complete, a plate should be selected. Both plate systems allow for the placement of locked screws effectively making them ﬁxed-angle devices. The mandibular plate has only threaded screw holes, while the DRB plate provides combination holes with both locked and non-locked options. The mandibular reconstruction plate is titanium, has scalloped edges, squared-off ends, and comes in a 12- or 20-hole size. The DRB plate is stainless steel and has tapered edges. It comes in one size, which is equivalent to the length of a 20-hole mandibular reconstruction plate. Superimpose the chosen plate over the dorsal skin of the wrist in a line from the distal metaphyseal ﬂare of the index metacarpal to the diaphysis of the radius (Fig. 7). Using ﬂuoroscopic guidance, mark out incisions that are centered over the proximal and distal most four screw holes (Fig. 8). The plate should be of sufﬁcient length to allow a minimum of three screws both distally and proximally. Depending on one’s preference, the arm can be exsanguinated and the tourniquet inﬂated at this time or the skin can be inﬁltrated with 0.25% bupivicaine with epinephrine for hemostasis. The distal incision is made over the base of the second metacarpal and extends distally over the shaft for approximately 5 cm. The extensor tendons to the index ﬁnger should be retracted ulnarly and the insertions of the extensor carpi radialis longus (ECRL) and extensor carpi radialis brevis (ECRB) should be identiﬁed at their insertion points on the bases of the second and third metacarpals, respectively. A second incision is made proximal to the outcropper muscles (abductor pollicis longus, extensor pollicis brevis) of the forearm in line with the second dorsal compartment. Care must be taken to avoid injury to the superﬁcial branch of the radial nerve as it pierces the fascia and traverses dorsally. The plate is inserted between the ECRL

and ECRB tendons and gently passed under the outcroppers. Remaining extra-articular, the plate should be advanced until it is visualized in the distal incision. Occasionally, because of dorsal fracture fragments or soft tissue obstruction, it will be difﬁcult to advance the plate past the carpus. In this case, a third incision can be made over Lister’s tubercle to ease passage of the plate under direct vision. This incision can also be helpful with joint reduction and application of bone graft later in the case. Once the plate is through to the distal incision, secure it to the shaft of the index metacarpal with a non-locking screw. Proper placement of a non-locked screw will effectively draw the plate to the bone, eliminating any gap formation that may occur between the plate and the bone if a locked screw is placed ﬁrst (Fig. 9). Using the C-arm, conﬁrm that radial length has been restored with the previously applied traction. If length has not been restored, the proximal aspect of the plate can be pushed distally in-line with the second metacarpal. With the length appropriately restored, clamp the plate to the radial shaft to secure its position. As with the metacarpal, insert a nonlocked screw into the proximal most hole of the plate. The remaining holes are ﬁlled with fully threaded, 2.4 mm bicortical locking screws. Frequently, the combination of traction and dorsal plate placement restores radial length, volar tilt, and radial inclination. However, there are times when supplemental fracture work must be undertaken after the spanning plate is applied. In these cases, articular fragments can be elevated and defects bone grafted through the incision located over Lister’s tubercle (Fig. 10). Most intercarpal injuries can also be addressed through this same incision. Percutaneous K-wires along with screws placed through the mid-portion of the plate overlying the distal radius can be implemented to augment fracture ﬁxation and stability. Any unstable volar shear or volar medial fragments must be buttressed through a separate volar incision. Prior to completion of the surgery, the DRUJ should be inspected for any signs of instability. Volar and dorsal excursion of the distal ulna in relation to the distal radius should be checked in neutral, pronated, and supinated positions. Attempts at reconstructing the triangular ﬁbrocartilage complex or stabilizing ulnar styloid fractures should be undertaken if the DRUJ is indeed found to be unstable and the patient’s condition allows. Patients who cannot tolerate prolonged procedures should have the ulna pinned directly to the radius just proximal to the DRUJ with two 0.62 in. K-wires.

& POSTOPERATIVE PROTOCOL/REHABILITATION

FIGURE 5 Two examples of available bridge plates for distal radius fractures. The titanium Arbeitsgemeinschaft fu¨r Osteosynthesefragen (AO) mandibular reconstruction plate (*) has blunted ends with scalloped edges. The AO distal radius bridge plate has tapered ends and beveled edges.

Patients without DRUJ instability should be splinted postoperatively for approximately 10 to 14 days to allow soft tissue healing. Our standard protocol is to place the patient in a long-arm plaster splint, but a forearm-based splint is acceptable for the compliant patient. Immediately postoperatively, both active and passive ﬁnger range of motion is started. Furthermore, the patient is allowed to bear weight through the forearm and elbow as needed for transfers and ambulation with a platform crutch. Lifting and carrying is allowed in the immediate postoperative period but is limited to 4.5 kg until the fracture has healed radiographically. At the 10- to 14-day mark, forearm rotation and DRUJ stability are once again assessed. Splints are discontinued altogether if forearm rotation is achieved with little effort and the DRUJ is stable. Patients are allowed to begin gentle axial loading of the wrist at this time. This axial loading is advanced at the one-month mark and patients are permitted to

156 & Lauder et al. (A)

(B)

FIGURE 6 (A) Anteroposterior and (B) lateral intraoperative radiographs demonstrating the initial reduction obtained for a comminuted intra-articular distal radius fracture utilizing traction and ligamentotaxis.

discontinue the platform attachment and begin weight bearing through the handgrip of their crutch. If at the 10- to 14-day mark, the patient has difﬁculty with supination or the DRUJ was repaired at the time of the initial surgery, the patient is placed in a removable long-arm splint. This splint is fabricated in our occupational therapy department. The splint holds the forearm supinated and can be removed for showering and range of motion exercises. The splint is continued for an additional three weeks or until ﬁve weeks postoperatively. Patients who required pins across their DRUJ have the pins removed at the three- to six-week mark and are kept in a removable long-arm splint for an additional two weeks. The timing for pin removal is based on the amount of DRUJ instability noted at the time of the index procedure. If supplemental K-wires were left outside of the skin, they should be removed at six weeks postoperatively. If the K-wires have been cut short and left under the skin, they can be removed at the time the spanning plate is removed assuming that they

FIGURE 7 Intraoperative photograph demonstrating how a bridge plate can be superimposed over the wrist to help mark out incisions. Note the sterile ﬁnger traps on the index and middle ﬁngers.

are not irritating the patient excessively. Generally, the spanning plate can be removed between three and four months postoperatively when the fracture has healed both clinically and radiographically. After plate removal, hand therapy should focus on strengthening and regaining wrist ﬂexion and extension.

& COMPLICATIONS AND THEIR MANAGEMENT Complications with this technique are generally few. As with any surgery, infection is always a concern. However, up to this point, reported infections have only been superﬁcial and responsive to antibiotics. There have been no cases of osteomyelitis. Three patients reportedly had an extension lag of 158 in the long ﬁnger after plate placement (31). Ultimately, in every case, the extension lag improved to less than 108 after plate removal. Two other reported complications include a broken plate and rupture of an ECRL (32). Both complications occurred in a commercial ﬁsherman who did not return to have his plate removed in a timely manner. The patient returned at 19 months after his initial surgery with broken hardware. At the time of plate removal, the ECRL rupture was noted and treated with a tenodesis to the ECRB. Anecdotally, we have seen a fracture in the second metacarpal just distal to a bridge plate. The fracture occurred in a very osteoporotic female who fell approximately two months after plate placement. The minimally displaced fracture was treated with splinting and went on to heal uneventfully.

& OUTCOMES Several studies have validated internal distraction plating as an excellent tool in the armamentarium for treatment of distal

Spanning Plating for Distal Radius Fractures & 157

FIGURE 8 X-ray demonstrating the use of ﬂuoroscopy and the superimposed bridge plate to help with incision placement.

radius fractures. Shortly after Burke and Singer (9) demonstrated the technique of bridge plating, Becton et al. described their own method implementing a specialized plate designed to simplify extra-articular insertion (33). Their technique involved application of the plate under the second dorsal compartment from the distal radius to the index metacarpal. Although their plate cannot be converted into a ﬁxed-angle device and it is too short for use in fractures with meta-diaphyseal extension, they reported good results in 35 patients. All fractures united by eight weeks and they had no extensor tendon ruptures or chronic regional pain syndromes (CRPS). Their two complications included loosening of metacarpal-sided screws and an index ﬁnger metacarpal fracture through a screw hole. The radius fractures in these two patients went on to heal uneventfully. In 2005 Ruch et al. reported on their technique for spanning distal radius fractures with a 3.5-mm ASIF compression plate (31). The study included 22 patients with high-energy injuries that had extension into the metaphyseal–diaphyseal portion of the distal radius. Plates were applied under the fourth dorsal compartment from the distal radius to the metacarpal of the

FIGURE 9 Intraoperative X-ray illustrating the use of a non-locked screw to secure the plate distally. Using a non-locked screw helps draw the bone to the plate. Once locked screws are placed the plate is essentially ﬁxed in space.

long ﬁnger. The average time to fracture healing was 110 days and there were no nonunions. At six months, patients averaged 578/658 of ﬂexion and extension and 778/768 of pronation and supination, respectively. At the one-year follow-up, 14 patients were rated as excellent, 6 as good, and 2 as fair according to the Gartland and Werley rating system for distal radius fractures (34). At an average of 24.8 months from surgery, DASH scores averaged 11.5 (35). Complications were few and included three postoperative infections in patients with open fractures and three mild extensor lags of the long ﬁnger that were noted to be less than 108 at the ﬁnal follow-up. There were no tendon ruptures, loss of reduction, or refracture after plate removal. Utilizing either 2.4 mm titanium mandibular reconstruction plates (Synthes) or 2.4 mm stainless steel DRB plates, Hanel et al. reported their results for 62 patients who required spanning of their distal radius fractures (32). Plates in this study were passed under the second dorsal compartment and afﬁxed to the shaft of the distal third of the radius and second

158 & Lauder et al.

standard external ﬁxation (p!0.05). Furthermore, there was no statistical difference in stability between those osteotomies stabilized with four screws both proximally and distally versus those secured with a three screws on either side of the simulated fracture.

& SUMMARY The spanning internal distraction plate is a useful tool for many distal radius fractures and it should have a role in any wrist surgeon’s armamentarium. As an internal ﬁxator this method has many biomechanical and practical advantages to a standard external ﬁxator. Furthermore, bridge plating with its ease of application, inherent stability, and need for minimal postoperative care, make it an ideal method of distal radius ﬁxation in patients with multiple extremity injuries and/or poor bone stock.

& SUMMATION POINTS

Indications &

& & &

High-energy injuries in polytraumatized patients who require weight bearing through the upper extremities for transfers. Osteoporotic fractures, with comminution, that require neutralization of the forces across the wrist. High-energy injuries with extension into the metadiaphyseal region. Fractures requiring bridging techniques in patients who refuse external ﬁxation.

Contraindications (Relative) &

FIGURE 10 X-ray demonstrating elevation of articular fragments through a dorsal incision located over Lister’s tubercle. After the fragments are elevated bone graft should be used for support. The bone graft can be supplemented with screws and/or Kirschner wires and/or small plates.

metacarpal utilizing locking screw technology. All the fractures went on to heal prior to plate removal, which averaged 112 days postoperatively. One patient broke his plate 16 months after implantation. He was a commercial ﬁsherman in Alaska who returned to work with his plate in place. He returned at 19 months postoperatively for plate removal and has since returned to work. Of the 62 patients, 41 returned to their previous occupation. It should be noted that 8 of the remaining 21 patients were unemployed prior to their injuries. Of the 21 patients, who did not return to their prior employment, 13 sustained multiple injuries necessitating drastic lifestyle changes. No cases of postoperative CRPS or ﬁnger stiffness were noted in this study. In unpublished data, Wolf et al. (36) assessed the rigidity of locking bridge plates in a cadaver model of unstable distal radius fractures. They also compared this information to the biomechanical stability of external ﬁxators in the same fracture model. The authors utilized 2.4 mm spanning plates on 10 specimens with 1 cm of the distal radius removed to simulate an unstable situation. Importantly, it was noted that locking internal bridge plates with either four or three screws both distally and proximally were signiﬁcantly more rigid than

&

Volar fracture fragments that will not reduce with ligamentotaxis. Dorsal soft tissue loss that would result in plate exposure.

Outcomes & & &

Average fracture healing times ranged from 60 to 110 days. Majority of patients are able to return to previous work: 41 of 62 in one study. Average motion at six months postoperatively was 578/658 of ﬂexion/extension and 778/768 of pronation/supination.

Complications & & & & &

Infrequent Extension lag of long ﬁnger Broken hardware Superﬁcial infection ECRL rupture

& REFERENCES 1.

Colles A. On the fracture of the carpal extremity of the radius. Edinburgh Med Surg J 1814; 10:182–6. 2. Cooney WP, III, Dobyns JH, Linscheid RL. Complications of Colles’ fractures. J Bone Joint Surg [Am] 1980; 62:613–9. 3. Altissimi M, Antenucci R, Fiacca C, et al. Long-term results of conservative treatment of fractures of the distal radius. Clin Orthop 1986; 206:202–10. 4. Fernandez DL. Reconstructive procedures for malunion and traumatic arthritis. Orthop Clin North Am 1993; 24:341–63.

Spanning Plating for Distal Radius Fractures & 159 5. Knirk JL, Jupiter JB. Intra-articular fractures of the distal end of the radius in young adults. J Bone Joint Surg [Am] 1986; 68:647–59. 6. McQueen MM, Caspers J. Colles fracture: does the anatomical result affect the ﬁnal outcome? J Bone Joint Surg [Br] 1988; 70:649–51. 7. Seitz WH. Complications and problems in the management of distal radius fractures. Hand Clin 1994; 10:117–23. 8. Trumble TE, Schmitt SR, Vedder NB. Factors affecting functional outcome of displaced intra-articular distal radius fractures. J Hand Surg [Am] 1994; 19:326–40. 9. Burke EF, Singer RM. Treatment of comminuted distal radius with use of an internal distraction plate. Tech Hand Up Extrem Surg 1998; 2:248–52. 10. Hove LM, Furnes O, Nilsen PT, et al. Closed reduction and external ﬁxation of unstable fractures of the distal radius. Scand J Plast Reconstr Surg Hand Surg 1997; 31:159–64. 11. Kaempffe FA, Walker KM. External ﬁxation for distal radius fractures: effect of distraction on outcome. Clin Orthop 2000; 380:220–5. 12. Kaempffe FA, Wheeler DR, Peimer CA, et al. Severe fractures of the distal radius: effect of amount and duration of external ﬁxator distraction on outcome. J Hand Surg [Am] 1993; 18:33–41. 13. McQueen MM, Michie M, Court-Brown C. Hand and wrist function after external ﬁxation of unstable distal radial fractures. Clin Orthop 1992; 285:200–4. 14. Nakata RY, Chand Y, Matiko JD, et al. External ﬁxators for wrist fractures: a biomechanical and clinical study. J Hand Surg [Am] 1985; 10:845–51. 15. Cooney WP. External ﬁxation of distal radius fractures. Clin Orthop 1983; 180:44–9. 16. Leung KS, Shen WY, Leung PC, et al. Ligamentotaxis and bone grafting for comminuted fractures of the distal radius. J Bone Joint Surg [Br] 1989; 71:838–42. 17. Weber SC, Szabo RM. Severely comminuted distal radial fracture as an unsolved problem: complications associated with external ﬁxation and pins and plaster techniques. J Hand Surg [Am] 1986; 11:157–65. 18. Ahloborg HG, Josefsson PO. Pin-tract complications in external ﬁxation of fractures of the distal radius. Acta Orthop Scand 1999; 70:116–8. 19. Parameswaran AD, Roberts CS, Seligson D, et al. Pin tract infection with contemporary external ﬁxation: how much of a problem? J Orthop Trauma 2003; 29:446–51. 20. Konrath GA, Bahler S. Open reduction and internal ﬁxation of unstable distal radius fractures: results using the Trimed ﬁxation system. J Orthop Trauma 2002; 16:578–85.

21. Orbay JL, Fernandez DL. Volar ﬁxation for dorsally displaced fractures of the distal radius: a preliminary report. J Hand Surg [Am] 2002; 27:205–15. 22. Axelrod TS, McMurtry RY. Open reduction and internal ﬁxation of comminuted, intraarticular fractures of the distal radius. J Hand Surg [Am] 1990; 15:1–11. 23. Kambouroglou GK, Axelrod TS. Complications of the AO/ASIF titanium distal radius plate system (pi plate) in internal ﬁxation of the distal radius: a brief report. J Hand Surg [Am] 1998; 23:737–41. 24. Orbay J. Volar plate ﬁxation of distal radius fractures. Hand Clin 2005; 21:347–54. 25. Smith DW, Henry MH. Volar ﬁxed-angle plating of the distal radius. J Am Acad Orthop Surg 2005; 13:28–36. 26. Chapman MW, Gordon JE, Zissimos AG. Compression-plate ﬁxation of acute fractures of the diaphyses of the radius and ulna. J Bone and Joint Surg [Am] 1989; 71:159–69. 27. Duncan R, Geissler W, Freeland AE, et al. Immediate internal ﬁxation of open fractures of the diaphysis of the forearm. J Orthop Trauma 1992; 6:25–31. 28. Behrens F, Johnson WD, Koch TW, et al. Bending stiffness of unilateral and bilateral ﬁxator frames. Clin Orthop 1983; 178:103–10. 29. Bartosh RA, Saldana MJ. Intraarticular fractures of the distal radius: a Cadaveric study to determine if ligamentotaxis restores radiopalmar tilt. J Hand Surg [Am] 1990; 15:18–21. 30. Medoff RJ. Essential radiographic evaluation for distal radius fractures. Hand Clin 2005; 21:279–88. 31. Ruch DS, Ginn TA, Yang CC, et al. Use of a distraction plate for distal radial fractures with metaphyseal and diaphyseal comminution. J Bone and Joint Surg [Am] 2005; 87:945–54. 32. Hanel DP, Lu TS, Weil WM. Bridge plating of distal radius fractures: the Harborview method. Clin Orthop 2006; 445:91–9. 33. Becton JL, Colborn GL, Goodrich JA. Use of an internal ﬁxator device to treat comminuted fractures of the distal radius: report of a technique. Am J Orthop 1998; 27:619–23. 34. Gartland JJ, Jr., Werley CW. Evaluation of healed Colles’ fractures. J Bone Joint Surg [Am] 1951; 33:895–907. 35. Amadio P, Beaton D, Bombardier C, et al. Measuring disability and symptoms of the upper limb: a validation study of the DASH questionnaire. J Econ Med 1996; 14:11. 36. Wolf JC, Weil WM, Hanel DP, et al. A biomechanical comparison of an internal radiocarpal spanning 2.4 mm locking plate and external ﬁxation in model of distal radius fractures (unpublished data).

20 Minimally Invasive Treatment of Distal Radius Fractures with the MICRONAIL Virak Tan and John T. Capo

Department of Orthopedics, The New Jersey Medical School, University of Medicine and Dentistry of New Jersey, Newark, New Jersey, U.S.A.

& INTRODUCTION

& PREOPERATIVE PLANNING

Fractures of the distal radius are common injuries. The extensive varieties of fracture patterns and patient populations in which they occur have led to the development of numerous treatment strategies. The treatment options include cast immobilization, percutaneous pinning (1), external ﬁxation (2–4), internal ﬁxation with plates (5–16), and a combination thereof (17,18). Management is based on the fracture pattern, degree of displacement, other associated injuries, and the individual patient’s needs and demands. Internal ﬁxation of these fractures has grown in popularity with the recognition of the importance of stable ﬁxation and early motion of the involved extremity (19). Although open reduction and internal ﬁxation with metal implants on the surface of the distal radius has allowed better reduction of the fracture fragments and in many cases offer more secure ﬁxation (5–16), it demands more extensive surgical exposure and soft-tissue stripping. Furthermore, hardware problems such as hardware prominence and tendon irritation, can occur in times which often lead to removal of the implant (7,8,11,12,15,16,19). The MICRONAIL (Wright Medical Technology, Inc., Arlington, Tennessee, U.S.A.) is an intramedullary (IM) device that was designed speciﬁcally to provide stable support of distal radius fractures while minimizing softtissue complications that can occur with internal and external ﬁxation implants (Fig. 1). The implant utilizes the principles of load sharing, subchondral screw divergence, and locked ﬁxedangle ﬁxation. It is inserted through a small skin incision at the radial styloid and does not further devascularize the fracture fragments. The limited surgical dissection and rigid fracture ﬁxation allow for minimal postoperative immobilization and an early return of function.

The evaluation of a distal radius fracture is straightforward and is based on the history, physical examination, and imaging studies. Important considerations in the history include age, hand-dominance, occupation/vocation, and mechanism of injury. Associated injuries in other areas of the body should be ruled out when there is a high-energy mechanism. Examination of the injured arm should include the elbow and forearm in addition to the carpus, distal radius, and distal radioulnar joint (DRUJ). Palpation may elicit tenderness about the scaphoid, scapholunate interval, or distal ulna. Careful neurovascular examination must be performed with attention to the median nerve, as acute carpal tunnel syndrome may develop with displaced distal radius fractures (21–23). If there is an associated operative injury about the wrist, it may need to be addressed at the same time of the distal radius ﬁxation. Initial imaging studies should include orthogonal radiographs of all involved areas. For isolated injuries of the distal radius, the index radiographs should consist of posterior– anterior, lateral, and oblique views centered over the wrist. Additional studies such as post-reduction radiographs and computed tomography scans may be obtained for better visualization of comminution or articular involvement. Traction X-rays are useful to determine the stability of the fracture pattern and whether it is amendable to MICRONAIL ﬁxation.

& INDICATIONS Overall, the indications for MICRONAIL use are generally the same as for other distal radius ﬁxation methods. Speciﬁc indications for the MICRONAIL include distal radial metaphyseal fractures (i) where casting or external ﬁxation is not tolerated by the patient, (ii) when reduction cannot be maintained by closed means, or (iii) where early motion and return to function is essential. Fracture patterns that are amenable to this form of ﬁxation include extra-articular fractures (AO Types 1B, 1C) (20), intra-articular fractures with large fragments that can be adequately reduced with closed or percutaneous methods (AO Types B2, B3, C1, and C2), and distal radial metaphyseal malunions. Fractures with multiple comminuted articular fragments (AO Type C3) may not be suitable for MICRONAIL stabilization alone and may require supplemental fragment-speciﬁc ﬁxation. Other contraindications may include medical comorbidities, patient refusal to undergo surgery, and active local infection.

& SURGICAL TECHNIQUE The surgical technique starts with a standard preparation of the arm for wrist for surgery (24). An image intensiﬁer is used to conﬁrm that a near-anatomic reduction is achievable by closed manipulation. After the tourniquet is inﬂated, a 2 to 3 cm longitudinal incision centered over the radial styloid is made in the skin (Fig. 2). Blunt dissection is performed through the subcutaneous tissue and branches of the radial sensory nerve are retracted from the surgical ﬁeld. Dissection is then carried down to the periosteum between the ﬁrst and second dorsal extensor compartments. The periosteum is elevated and retracted. The fracture is provisionally reduced and stabilized with Kirschner wires (K-wires) as needed (Fig. 3). In cases where there are large articular fragments, especially on the ulnar corner, temporary placement of K-wires may help maintain the reduction. Using a cannulated drill, cortical window is made at the tip of the radial styloid 2 to 3 mm proximal to the radioscaphoid joint line (Fig. 4). The starter awl is then introduced into the radial styloid in a retrograde fashion under ﬂuoroscopic guidance (Fig. 5). The fracture should be held in a reduced position as the awl is advanced into the metaphysis. The awl is removed and broaching of the bone is begun. With the aid of an image intensiﬁer, the broach is guided across the fracture site and advanced proximally into the

162 & Tan and Capo (A)

FIGURE 2 Marking for incision over radial styloid (arrow), between the ﬁrst and second dorsal compartments, for the entry point. The other marking (dorsal) is for placement of the proximal interlocking screws. Source: Courtesy of Virak Tan, MD.

(B)

intensiﬁer. Satisfactory depth of insertion can be determined by inserting a K-wire through the most distal hole of the device. The wire should pass within the subchondral bone, approximately 2 mm proximal to the articular surface. The distal locking buttress screws are now inserted after drilling through the guides on the jig, thereby locking the distal bone fragment to the nail. These screws also lock into the nail, creating a ﬁxedangle device. Attention is turned to placement of the proximal interlocking screws. Minor adjustments in radial length and inclination can be done at this time. Temporary K-wires can be

FIGURE 1 Photographs of the MICRONAIL. (A) Frontal view and (B) side view. Source: Courtesy of Virak Tan, MD.

metaphyseal–diaphyseal bone (Fig. 6) by gently tapping the end with a small mallet. It is critical at this step to stay radial in the canal in order to avoid penetrating the ulnar cortex of the radial shaft. Sequential broaching is then done to the point where the broach does not spin within the medullary canal, using 2-ﬁnger pressure. Care should be taken to avoid “over-rotating” during the broaching. The broach should be inserted to the level of the shoulder of the broach, to ensure proper depth below the radial cortex. Once the bone has been broached to the appropriate size, the actual implant, attached to the insertion jig, is advanced into the bone until it is countersunk within the radial styloid. Position of the MICRONAIL should be conﬁrmed with the image

FIGURE 3 Intraoperative posteroanterior ﬂuoroscopic view of provisional stabilization of a distal radius fracture with K-wires wires. The K-wires are placed so that there is no obstruction to the path of the MICRONAIL. Abbreviations: K-wires, Kirschner-wires. Source: Courtesy of Virak Tan, MD.

Minimally Invasive Treatment of Distal Radius Fractures with the MICRONAIL & 163

FIGURE 4 Intraoperative posteroanterior and lateral ﬂuoroscopic views of a cannulated drill that is used to create a cortical window at the radial styloid, 2 to 3 mm proximal to the radioscaphoid joint line. This can be done under hand power. Source: Courtesy of Virak Tan, MD.

& Case Example

inserted through the jig and into the proximal fracture fragment to maintain the ﬁnal reduction. The proximal interlocking screws are placed through a single 2 to 3 cm longitudinal incision on the dorsum of the wrist, using the guide and sleeve provided. These bicortical interlocking screws secure the distal fragment-nail construct to the shaft fragment. After the jig is disassembled, ﬁnal ﬂuoroscopic images conﬁrm the position of the implant and the alignment of the fracture. The tourniquet is deﬂated, the wounds are irrigated, and the skin is closed. Postoperatively, for AO fracture types A2, A3, B2, B3, and C1 no splinting is necessary; For AO types C2 and C3, the wrist is splinted for two to four weeks. Finger motion is started immediately. Patients may perform home exercises with active ﬁnger (and wrist motion if not splinted) as tolerated. At two to four weeks, any splint use is discontinued and home therapy is progressed. The decision for formal supervised hand therapy is individualized and based on the patient’s progress.

The patient is an 82-year-old right hand dominant female with a history of poor vision and difﬁculty ambulating, who fell on her outstretched right hand. She was found to have a displaced intra-articular AO Type C2 fracture with an associated ulnar styloid fracture (Fig. 7). Closed reduction was performed in the emergency room and a sugar-tong splint applied. Postreduction X-rays showed incomplete restoration of the radial length and dorsal comminution in the metaphyseal bone. A decision was made to perform operative stabilization of the fracture in order to minimize her dysfunction and disability. After medical clearance, she underwent MICRONAIL ﬁxation of the distal radius three days after her injury (Fig. 8). The ulnar-sided dorsal fragment was percutaneously reduced and provisional stabilized with a K-wire before instrumenting for the MICRONAIL. After ﬁxation, testing of the DRUJ showed

FIGURE 5 The starter awl is introduced through the cortical window at the radial styloid in a retrograde fashion under ﬂuoroscopic guidance. It is guided across the fracture site with the fracture in a reduced position. Source: Courtesy of Virak Tan, MD.

FIGURE 6 The broaching of the canal is done by gently tapping the end with a small mallet. Adequate broaching is achieved when the broach is fully seated within the canal and it does not toggle with “2-ﬁnger pressure”. Source: Courtesy of Virak Tan, MD.

164 & Tan and Capo (A)

(B)

FIGURE 7 Injury radiographs, (A) posteroanterior view and (B) lateral views of a displaced intra-articular AO Type C2 fracture with an associated ulnar styloid fracture in an 82-year-old woman. Source: Courtesy of Virak Tan, MD.

no instability and the ulnar styloid was not displaced; therefore, the ulnar styloid was left alone. The incidental ﬁnding of a scapholunate interval widening was left alone because of the patient’s advanced age and no prior history of wrist pain. Postoperatively, a splint was not used and the patient was discharged home the same day. The patient did not require (or desire) formal therapy. At eight weeks postoperation, she had no wrist pain and reported being back to her baseline level of function. Radiographs showed a healed distal radius fracture with no intra-articular step-off (Fig. 9). Examination showed an active wrist range of motion of 458 of ﬂexion to 758 of extension; 208 and 308 of radial and ulnar deviation, respectively and full forearm rotation (Fig. 10). Her grip strength was 25 lb (76% of the uninjured side) and she was able to lift a 5-lb dumbbell. She was pleased with the outcome.

FIGURE 8 (Top) Intraoperative image intensiﬁer lateral view and (Bottom) fossa lateral views, showing restoration of the volar tilt and establishment of articular congruity. Source: Courtesy of Virak Tan, MD.

& COMPLICATIONS Similar to other methods of distal radius fracture ﬁxation, one of the complications that can occur is loss of reduction. There are two reasons why this can happen with the MICRONAIL. First, it has been too far proximally and the distal locking buttress screws are more than 2 mm from the joint line. In such an instance, distal fragment can settle until the subchondral bone come to rest against the screws. The second reason is inadequate ﬁxation of an intra-articular fragment, which can redisplace in the postoperative period. This potential pitfall must be recognized during the operative procedure so that K-wire(s) or small buttress plate(s) may be used as supplemental ﬁxation. Transient dorsal radial sensory nerve irritation has been reported with the MICRONAIL. Because this sensory nerve courses within the operative ﬁeld at the radial styloid, excessive retraction or inadvertent surgical trauma can result in sensory

Minimally Invasive Treatment of Distal Radius Fractures with the MICRONAIL & 165 (B) (A)

FIGURE 9 Postoperative radiographs (A) PA view and (B) lateral views at eight weeks status/post MICRONAIL ﬁxation. Source: Courtesy of Virak Tan, MD.

disturbance in the hand. The surgeon should be comfortable with the anatomy and mobilization of nerve, which can be bluntly dissected and gently retracted dorsally. A complication that has not been reported but has the potential to cause problems is placement of excessively long

(A)

(C)

screws, especially distally. Screw penetration into the DRUJ and radiocarpal joint is avoided by ﬂuoroscopic conﬁrmation of screw length and position. If the most distal screw enters the radiocarpal joint, the implant can be seated more proximally.

(B)

(D)

FIGURE 10 Clinical photographs of the patient in Figure 7 at eight weeks after ﬁxation with the MICRONAIL. Source: Courtesy of Virak Tan, MD.

166 & Tan and Capo

& OUTCOMES In 2005, we reported our early experience with the MICRONAIL (25). A prospective analysis of 23 consecutive patients was performed. The mean age of the group was 59 years (range 31–83). Overall outcome regarding patient satisfaction, residual pain and activity levels, and radiographic measurements were highly satisfactory even at the early time points. At two months post-op, active wrist motions were: Flexion 388, extension 538, radial deviation 168, ulnar deviation 248, supination 738, and pronation 798. Grip strength was 46% of the uninjured side. At the six-month follow-up, the motion continued to improve and the average grip strength increased to 80% of the opposite side. Radiographic assessment showed an average volar tilt of 58, radial inclination of 218, ulnar variance of 08, and radial height of 12 mm. There was one failure in the group (loss of reduction) but no implant had to be removed for soft-tissue complication. In unpublished data, one of us (VT) followed 13 patients to the one year mark. The average active ranges of motion for these patients were: wrist ﬂexion 558, wrist extension 688, radial deviation 208, ulnar deviation 338, pronation 878, and supination 828. Final radiographs showed radial inclination of 228, radial height of 11 mm, ulnar variance of 0 mm, volar tilt of 48. Grip strength was 86% of the uninjured side and the Disability of the Arm, Shoulder and Hand score was 4 (range 0–16).

& SUMMARY The MICRONAIL is an IM implant that can be inserted by minimally invasive techniques and allow for secure internal ﬁxation of unstable distal radius fractures. A future direction of this technique includes development of complementary adjunct methods for stabilizing AO Type C3 fractures. Indications for the MICRONAIL include: & &

& &

Unstable extra-articular fractures (AO Types A2 and A3) Displaced intra-articular fractures that can be reduced by closed or percutaneous manipulation (AO Types B2, B3, C1, and C2) Fractures that are redisplaced with casting, pinning, or external ﬁxation Distal radius malunions (see chap. 24)

The advantages of MICRONAIL ﬁxation compared to open plating of distal radius fractures are: & & & &

Minimal surgical dissection No soft-tissue stripping of the fracture fragments No prominence of hardware Early return of range of motion, grip strength, and function.

& REFERENCES 1. 2. 3.

Dowdy PA, Patterson SD, King GJ, et al. Intrafocal (Kapandji) pinning of unstable distal radius fractures: a preliminary report. J Trauma 1996; 40(2):194–8. Bishay M, Aguilera X, Grant J, et al. The results of external ﬁxation of the radius in the treatment of comminuted intraarticular fractures of the distal end. J Hand Surg [Br] 1994; 19(3):378–83. Gainor BJ, Groh GI. Early clinical experience with Orthoﬁx external ﬁxation of complex distal radius fractures. Orthopedics 1990; 13(3):329–33.

4. 5. 6.

7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18.

19. 20. 21.

22. 23. 24. 25.

Nakata RY, Chand Y, Matiko JD, et al. External ﬁxators for wrist fractures: a biomechanical and clinical study. J Hand Surg [Am] 1985; 10:845–51. Campbell DA. Open reduction and internal ﬁxation of intra articular and unstable fractures of the distal radius using the AO distal radius plate. J Hand Surg [Br] 2000; 25(6):528–34. Carter PR, Frederick HA, Laseter GF. Open reduction and internal ﬁxation of unstable distal radius fractures with a low-proﬁle plate: a multicenter study of 73 fractures. J Hand Surg [Am] 1998; 23(2):300–7. Constatine KJ, Clawson MC, Stern PJ. Volar neutralization plate ﬁxation of dorsally displaced distal radius fractures. Orthopedics 2002; 25:125–8. Drobetz H, Kutscha-Lissberg E. Osteosynthesis of distal radial fractures with a volar locking screw plate system. Int Orthop 2003; 27(1):1–6. Hahnloser D, Platz A, Amgwerd M, et al. Internal ﬁxation of distal radius fractures with dorsal dislocation: pi-plate or two 1/4 tube plates? A prospective randomized study J Trauma 1999; 47(4):760–5. Harness N, Ring D, Jupiter JB. Volar Barton’s fractures with concomitant dorsal fracture in older patients. J Hand Surg [Am] 2004; 29(3):439–45. Jupiter JB, Fernandez DL, Choon-Lai T. Operative treatment of volar intra-articular fractures of the distal end of the radius. J Bone Joint Surg Am 1996; 78:1817–28. Lee HC, Wong YS, Chan BK, et al. Fixation of distal radius fractures using AO titanium volar distal radius plate. Hand Surg 2003; 8(1):7–15. Orbay JL, Fernandez DL. Volar ﬁxation for dorsally displaced fractures of the distal radius: a preliminary report. J Hand Surg [Am] 2002; 27(2):205–15. Orbay JL, Fernandez DL. Volar ﬁxed-angle plate ﬁxation for unstable distal radius fractures in the elderly patient. J Hand Surg [Am] 2004; 29(1):96–102. Ring D, Jupiter JB, Brennwald J, et al. Prospective multicenter trial of a plate for dorsal ﬁxation of distal radius fractures. J Hand Surg [Am] 1997; 22(5):777–84. Ring D, Prommersberger K, Jupiter JB. Combined dorsal and volar plate ﬁxation of complex fractures of the distal part of the radius. J Bone Joint Surg Am 2004; 86(8):1646–52. Bass RL, Blair WF, Hubbard PP. Results of combined internal and external ﬁxation for the treatment of severe AO-C3 fractures of the distal radius. J Hand Surg [Am] 1995; 20(3):373–81. Rogachefsky RA, Lipson SR, Applegate B, et al. Treatment of severely comminuted intra-articular fractures of the distal end of the radius by open reduction and combined internal and external ﬁxation. J Bone Joint Surg Am 2001; 83(4):509–19. Bell JS, Wollstein R, Citron ND. Rupture of ﬂexor pollicis longus tendon: a complication of volar plating of the distal radius. JBJS [Br] 1998; 80(2):225–6. Mu¨ller ME. Comprehensive Classiﬁcation of Fractures. Pamphlet I. Bern, Switzerland: ME Mu¨ller Foundation, 1995:1–21. Cohen MS, McMurtry RY, Jupiter JB. Fractures of the distal radius. In: Browner BD, Jupiter JB, Levine AM, Trafton PG, eds. Skeletal Trauma: Basic Science, Management, and Reconstruction. 3rd ed. Philadelphia, PA: Saunders, 2003:1315–61. Cooney WP, Dobyns JH, Linscheid RL. Complications of Colles’ fractures. J Bone Joint Surg 1980; 62-A(4):613–9. Melone CP, Jr. Articular fractures of the distal radius. Orthop Clin North Am 1984; 15(2):217–36. Tan V, Capo J, Warburton M. Distal radius ﬁxation with an intramedullary nail. Tech Hand Up Extrem Surg 2005; 9(4):195–201. Tan V, Capo J, Warburton M. Minimally invasive distal radius ﬁxation with an intramedullary nail. In: American Society for Surgery of the Hand, 60th Annual Meeting, San Antonio, TX, September 22, 2005.

21 Dorsal Nail Plate Fixation for Distal Radius Fractures Jorge L. Orbay and Amel Touhami Miami Hand Center, Miami, Florida, U.S.A.

& INTRODUCTION The treatment of distal radius fractures has evolved as a variety of management techniques have been introduced. These include closed reduction and immobilization with splints or casts (1–3), extrafocal or intrafocal percutaneous pinning (4–8), external ﬁxation (9–14), and different methods of internal ﬁxation (15–19). Nonetheless, ﬁxation failure in osteoporotic bone, poor reduction, and reﬂex sympathetic dystrophy remain a concern for all techniques (20–24). Open reduction and internal ﬁxation performed by various methods has recently gained acceptance, especially when stable reduction cannot be achieved by manipulative means. Conventional buttress plate ﬁxation, however, has proven inadequate for the majority of dorsal injuries due to poor ﬁxation and frequent soft tissue complications (25–29). For these reasons, ﬁxed-angle internal ﬁxation through a dorsal or volar approach has been advocated. The latter presents the advantage of avoiding extensor tendon dysfunction (30,31). Most importantly, with ﬁxed-angle ﬁxation, early range of motion can be initiated promptly even in patients with poor bone stock (32,33). Because plate application often requires substantial surgical dissection and many distal radius fractures are easily reduced by closed manipulation; therefore, a method of minimally invasive ﬁxed-angle ﬁxation is desirable. A narrow intrafocal ﬁxed-angle nail–plate, the Dorsal Nail Plate Anatomic (DNP-Ae; Hand Innovations DePuy, Miami, Florida, U.S.A.), has been developed for this purpose. It is inserted through a small dorsal incision after closed or open reduction of the fracture is achieved. Trauma to the extensor tendons is minimized by avoiding dissection of all but the third extensor compartment and by transposing the extensor pollicis longus (EPL) tendon into a subcutaneous position and utilizing the ﬂoor of its sheath as the site of implant application. This technique has proven in practice to be a simple and effective method of ﬁxation for extra-articular fractures, particularly in patients with signiﬁcant comorbidities.

& INDICATIONS & Speciﬁc Diagnoses The decision to proceed with minimally invasive dorsal nail plating is based upon a combination of factors: patient’s age, general medical condition, fracture type, stability, and the functional impact of the injury. We prefer this procedure for patients over 60 years of age, as osteoporosis becomes prevalent and simple pinning is often insufﬁcient ﬁxation. Conversely, these patients commonly present simple fracture patterns (AO types: A2 and A3) that can be easily reduced and ﬁxed without extensive dissection. The direct subchondral support provided by the ﬁxed-angle pegs in the DNP effectively prevents settling or secondary loss of reduction. From a radiological standpoint,

fracture instability is deﬁned as loss of initial reduction with radiographic evidence of any of the following: more than 208 of angulation in any plane, displacement greater than two-thirds the width of the shaft, shortening greater than 5 mm, and associated distal ulnar fracture. The latter, if present, further increases instability and can therefore be an indication for a concomitant internal ﬁxation. However, these criteria are not absolute and other clinical factors should be taken into consideration before proceeding with surgery. Extra-articular fractures that have displaced after nonoperative treatment can be salvaged by this method if treated before callus formation becomes excessive. Fractures with nondisplaced articular lines can also be good indications. In general, unstable extra-articular distal radius fractures in active elderly patients are the best indications for this form of treatment.

& Contraindications Contraindications to the procedure include severe articular comminution and displacement, comminution that extends into the diaphyseal portion of the radius and advanced nascent malunions, or inveterate fractures with extensive callus formation. General factors contraindicating surgical repair are active or latent infection, inadequate soft tissue coverage, and an unreliable patient. Low demand patients with severe deformity but stable impacted fracture patterns, which do not present pain or functional loss, usually do not beneﬁt from surgical treatment. This procedure may be contraindicated in severe medical conditions such as immunosuppression, bleeding disorders, and septicemia. Cardiopulmonary failure can also be a contraindication.

& Indications When Compared with Similar Open Techniques This technique is preferred for extra-articular fractures in the compromised patient because it requires only modest dissection and brief surgical time, particularly when local or regional anesthesia is indicated. It also presents an advantage in the polytraumatized patient where surgical time must be kept at a minimum. Patients with coagulopathy or those on renal dialysis, who are in need of frequent heparinization, also beneﬁt as the small wound volume decreases the chance of hematoma formation. The ﬁxed-angle support provided by this device is not as extensive as that offered by a volar ﬁxed-angle plate; fractures with severe articular fragmentation are better treated with the latter device. Fractures that require signiﬁcant soft tissue release and those in need of debridement of large volumes of callus should be treated through more extensive volar or dorsal exposures.

168 & Orbay and Touhami

& CONSIDERATIONS FOR PREOPERATIVE PLANNING & Preoperative Physical Examination A neurovascular assessment should be performed to evaluate perfusion, discount compartment syndrome, and detect concomitant median or ulnar neuropathy. The soft tissue envelope should be assessed, and the presence of an open fracture must be noted. The surgeon must also note excessive pain or loss of ﬁnger motion. Fracture mobility is important for performing minimally invasive ﬁxation. The time elapsed since the injury is a critical factor and must be assessed as the difﬁculty of reduction escalates between the third and fourth week. Preoperative ﬂuoroscopic evaluation is often very useful to clarify this issue.

& Preoperative Imaging Proper radiological evaluation must be performed in order to understand the fracture pattern, and exclude cases with signiﬁcant articular comminution. Standard posteroanterior and lateral radiographs must be obtained and oblique views are occasionally useful. Sometimes provisional reduction or traction views should be performed prior to radiographs in order to improve the information yielded. Tomography and computed tomography scanning may occasionally be helpful to assess the degree of articular displacement. Nerve conduction studies are usually not indicated; however, a good neurovascular physical examination is necessary.

& SURGICAL TECHNIQUE & Operating Room Setup This minimally invasive dorsal nail plating surgical procedure is usually performed in the outpatient setting, under local or regional anesthesia. A tourniquet is applied and the patient’s arm is prepared, draped, and extended on a standard radiolucent hand table. The image intensiﬁer is draped sterile and introduced into the ﬁeld as necessary.

& Equipment: Implant Description The technique described here uses a speciﬁc implant, the DNP-A. This implant is best described as an intrafocal nail– plate. It is inserted through the fracture site, has a distal ﬁxedangle plate portion placed on the surface of the distal fragment, and a proximal locked intramedullary nail portion placed inside the proximal fragment (Fig. 1). These two sections are joined by a neck portion across the fracture site. The head section presents a narrow cross-sectional area in order to prevent impingement on the adjoining extensor tendons. This

FIGURE 1 The dorsal nail plate (DNP) is an intrafocal nail–plate hybrid. It is inserted through the fracture site, has a distal ﬁxed-angle plate portion, and a proximal locked intramedullary nail portion. The two sections are joined by a neck that traverses the fracture site.

area is placed on the bone surface prepared by mobilization of the EPL tendon and ﬂattening of Lister’s tubercle. Proximal surgical dissection is minimized as a result of the intramedullary location of the proximal portion of the implant, which automatically aligns itself with the axis of the radius inside the medullary canal. This feature also places the head of the implant in its correct position in space, therefore facilitating reduction of the distal fragment (indirect reduction). Distal ﬁxation is provided by ﬁxed-angle elements that fan off the head of the implant and underneath the subchondral bone. Proximal ﬁxation is provided by unicortical locking screws that compress the body of the implant against the endosteal surface.

& Operative Approach A straight dorsal 3- to 4-cm longitudinal incision is made over Lister’s tubercle (Fig. 2) and the extensor retinaculum is opened over the third extensor compartment. Care must be taken to protect the crossing sensory branches of the radial nerve during the dissection. The EPL tendon sheath is easily identiﬁed as it is usually ﬁlled with blood distal to Lister’s tubercle. This sheath is released several centimeters proximally and distally to the latter structure. The EPL tendon is then retracted toward the radial side (Fig. 3), and Lister’s tubercle is exposed subperiosteally. Consideration must be given to release the brachioradialis if reduction is difﬁcult. The fracture is exposed, debrided, and reduced.

& Nail Insertion and Fracture Reduction Lister’s tubercle is either ﬂattened by downward digital pressure or removed with a rongeur. This creates a ﬂat surface for proper seating of the head of the implant. The joint line is then located by inserting an 18-gauge needle. The site for insertion of the body of the implant into the medullary canal is estimated, and is usually at or close to the dorsal fracture line. To allow for proper seating of the DNP neck, a small amount of bone may require removal with a rongeur (Fig. 4). The medullary canal is now identiﬁed and opened in a proximal direction using a curved bone awl. The DNP alignment jig is assembled onto the implant. The intramedullary end of the DNP is inserted into the proximal fragment of the radius through the fracture site. The nail is advanced until the head of the device seats ﬂush against the bone. The next critical step is to properly reduce and ﬁx the fracture. Provisional ﬁxation is achieved using Kirschner (K)-wires,

FIGURE 2 A small dorsal incision in line with Lister’s tubercle provides the exposure necessary for insertion of this device.

Dorsal Nail Plate Fixation for Distal Radius Fractures & 169

inserted through the jig (Fig. 5). The distal wire anticipates the future position of the pegs and must be seen in the 208 elevated fossa-lateral view as placed just a few millimeters below the subchondral bone (Fig. 6) (34). If the surgeon is satisﬁed, permanent ﬁxation of the distal fragment is then secured by inserting pegs or locking screws. While drilling for the pegs, the distal fragment must be pushed up against the implant to assure that the head is ﬂush with the bone surface. After drilling, the preassembled drill guides are removed. Pegs must not protrude through the far cortex as this can potentially damage the ﬂexor tendons. After fracture reduction is conﬁrmed, and proper subchondral peg positioning is veriﬁed radiographically, the provisional K-wires are removed. The next step is to secure the plate to the proximal fragment. The soft tissues are retracted to expose the dorsum of the proximal fragment. Using the jig handle as a guide, holes are drilled and the proximal locking screws are inserted (Fig. 7). These are unicortical screws that engage threads on the implant, and will provide compression between the implant and the endosteal surface of the bone. The jig is now detached from the head of the implant and any remaining empty peg holes are ﬁlled. After device application, the EPL tendon will course proximal to the head of the implant and along the sides of the wrist and ﬁnger extensors, preventing tendon impingement (Fig. 8). Rerouting the EPL creates a minimal functional

FIGURE 3 The extensor pollicis longus (EPL) tendon sheath is opened and the tendon retracted toward the radial side in order to provide space for the head of the implant. Lister’s tubercle is exposed and ﬂattened while the brachioradialis tendon must be released if reduction proves difﬁcult.

FIGURE 4 Some bone may need to be removed from the edges of the fracture line in order for the neck of the implant to seat properly.

FIGURE 5 The implant is introduced using a jig that serves as a drill guide and allows the use of ﬁxed-angle Kirschner wires (K-wires) for temporary fracture stabilization.

170 & Orbay and Touhami

FIGURE 6 Fixed-angle Kirschner wires (K-wires) not only provide provisional ﬁxation but also anticipate future peg position and therefore facilitate proper implant placement.

FIGURE 7 Proximal ﬁxation is provided by unicortical locking screws that engage the implant and compress it to the endosteal surface. The jig guides their application.

FIGURE 8 Tendon irritation is avoided because the extensor pollicis longus (EPL) tendon courses proximal to the head of the implant and the wrist and ﬁnger extensors along its sides.

Dorsal Nail Plate Fixation for Distal Radius Fractures & 171

FIGURE 9 Preoperative and postoperative radiographs of an unstable extra-articular distal radius fracture in an 82-year-old patient with osteoporosis.

disturbance. Final radiographic views are obtained before closing the wound.

& CLOSURE AND POSTOPERATIVE MANAGEMENT Postoperative rehabilitation is critical to a quality long-term outcome. After simple skin closure, a postoperative dressing that allows ﬁnger motion is applied. A standardized program of rehabilitation is used to maximize functional recovery. The patient is instructed on elevation and on ﬁnger active range of motion exercises immediately after surgery. At one-week follow-up, the operative dressing is removed, the patient is referred to therapy, and a custom-formed plastic short-arm splint is provided. Functional use of the hand is encouraged and the patient is given a 5-pound weight lifting limit on the affected extremity. Full ﬁnger ﬂexion (ﬁngertips to distal palmar crease) is expected at this time and forearm rotation is now commenced. At four-week follow-up evaluation, the splint is discarded. We expect the patient to have recovered signiﬁcant forearm rotation by this time, and attention is now placed on wrist ﬂexion–extension and strengthening. After radiographic union, most patients will spontaneously use their hands to perform activities of daily living after the ﬁrst or second postoperative week. At two months, most patients do not require further therapy. At four months, wrist extension and forearm rotation

are usually at pre-injury levels. Wrist ﬂexion takes somewhat longer to return, presumably because of the dorsal location of the incision. The anatomical and functional results provided by this technique are very satisfying (Figs. 9 and 10).

& COMPLICATIONS AND THEIR MANAGEMENT Our experience has shown that complications are relatively infrequent and can be successfully treated.

& Pitfalls & & &

& & & & &

Poor indications, excessive articular comminution Inadequate exposure Inadequate or loss of reduction; however, minor imperfections in reduction such as the absence of volar tilt and slight (1 mm) loss of radial length do not usually result in appreciable functional deﬁcits Improper implant application with pegs too proximal to provide subchondral support Hypertrophic scar formation limiting wrist ﬂexion A radial nerve injury at the time of exposure An unrecognized median neuropathy Inadequate creation of the notch for introduction of the neck of the implant

FIGURE 10

Functional results 10 weeks after surgery.

172 & Orbay and Touhami

& Bailouts &

& &

In the presence of excessive callus formation preventing reduction, the incision must be extended, the fracture callus debrided, and the soft tissues, including the brachioradialis, must be released In case of unforeseen comminution, adjuvant ﬁxation with small plates or K-wires must be used In case of a large metaphyseal defect, a bone graft may be required

& REFERENCES 1. 2. 3. 4.

& OUTCOMES

5.

Only one reference is available for the analyses of the outcomes of this technique when using the DNP (35). In a retrospective series, 46 unilateral unstable extra-articular distal radius fractures ﬁxed with the DNP were compared to 24 extra-articular fractures ﬁxed with volar ﬁxed-angle ﬁxation. Two-thirds of these fractures resulted from a low-impact trauma; 37 occurred in females and 9 in males. The average age was 70G6.5 years, and the mean follow-up was 18 months. The data revealed a brief surgical time with an average tourniquet time of 22G4 minutes. The functional results were such that wrist extension and forearm rotation were close to pre-fracture levels at an average follow-up of six weeks. However, the recovery of wrist ﬂexion was delayed in the early postoperative phase (12G4 weeks) when compared with the volar ﬁxed-angle ﬁxation series. This parameter fully recovered at ﬁnal followup (12G6 months). Grip strength averaged 82% of the contralateral side at ﬁnal follow-up. Patient satisfaction was high, demonstrated by an average Disability of Arm Shoulder and Hand score of 17G3. Most importantly, complications were fewer for the DNP than for the volar plates in this study.

6. 7. 8. 9. 10. 11. 12. 13. 14.

& SUMMARY

15.

& General Conclusions

16.

Dorsal nail minimally invasive ﬁxation is an acceptable treatment option for extra-articular distal radius fractures. The technique is simple and fast, and the functional recovery is usually satisfactory. This technique is particularly indicated for the elderly and compromised patients.

& Future Direction of the Technique

17.

18. 19.

This technique should gain popularity among orthopedic surgeons as its beneﬁts clearly outweigh its drawbacks. The learning curve is short and the results are reproducible.

20.

& SUMMATION POINTS

21.

Indications & &

Unstable extra-articular distal radius fractures Active, elderly, medically compromised, osteoporotic patients

22. 23.

Outcomes &

Fast recovery of function with slight delay in wrist ﬂexion

Complications & &

Loss of reduction following poor indication or poor implant application Hypertrophic scar limiting wrist motion, particularly in ﬂexion

24. 25.

Palmer AK. Fractures of the distal radius. In: Green DP, ed. Operative Hand Surgery. 2nd ed. New York: Churchill Livingstone, 1988:991–1026. Gupta A. The treatment of Colles’ fracture. Immobilisation with the wrist dorsiﬂexed. J Bone Joint Surg Br 1991; 73(2):312–5. Cohen MS, Frillman T. Distal radius fractures: a prospective randomized comparison of ﬁbreglass tape with QuickCast. Injury 1997; 28(4):305–9. Stein AH, Jr., Katz SF. Stabilization of comminuted fractures of the distal inch of the radius: percutaneous pinning. Clin Orthop Relat Res 1975; May(108):174–81. Munson GO, Gainor BJ. Percutaneous pinning of distal radius fractures. J Trauma 1981; 21(12):1032–5. Kapandji AI, Epinette JA. Colles’ Fractures: Treatment by Double Intrafocal Wire Fixation. The Wrist. New York: Churchill Livingstone, 1988:65–73. Greatting MD, Bishop AT. Intrafocal (Kapandji) pinning of unstable fractures of the distal radius. Orthop Clin North Am 1993; 24(2):301–7. Dowdy PA, Patterson SD, King GJ, Roth JH, Chess D. Intrafocal (Kapandji) pinning of unstable distal radius fractures: a preliminary report. J Trauma 1996; 40(2):194–8. Riggs SA, Jr., Cooney WP., III External ﬁxation of complex hand and wrist fractures. J Trauma 1983; 23(4):332–6. Wagner HE, Jakob RP. Surgical treatment of distal radius fracture with external ﬁxation. Unfallchirurg 1985; 88(11):473–80. Fernandez DL, Geissler WB. Treatment of displaced articular fractures of the radius. J Hand Surg [Am] 1991; 16(3):375–84. Seitz WH, Jr., Froimson AI, Leb R, Shapiro JD. Augmented external ﬁxation of unstable distal radius fractures. J Hand Surg [Am] 1991; 16(6):1010–6. Steffen T, Eugster T, Jakob RP. Twelve years follow-up of fractures of the distal radius treated with the AO external ﬁxator. Injury 1994; 1994(Suppl. 4):S–54. Agee JM. Application of multiplanar ligamentotaxis to external ﬁxation of distal radius fractures. Iowa Orthop J 1994; 14:31–7. Thornton L, Warner P. The management of Colles’ fractures with the Rush medullary nail. South Med J 1955; 48(6):654–6. Bennett GL, Leeson MC, Smith BS. Intramedullary ﬁxation of unstable distal radius fractures. A method of ﬁxation allowing early motion. Orthop Rev 1989; 18(2):210–6. Hoffmann R, Krettek C, Hetkamper A, Haas N, Tscherne H. Osteosynthesis of distal radius fractures with biodegradable fracture rods. Results of two years follow-up. Unfallchirurg 1992; 95(2):99–105. Hastings H, Leibovic SJ. Indications and techniques of open reduction. Internal ﬁxation of distal radius fractures. Orthop Clin North Am 1993; 24(2):309–26. Flisch CW, la Santa DR. Osteosynthesis of distal radius fractures by ﬂexible intramedullary nailing (Geneva experience). Chir Main 1998; 17(3):245–54. Altissimi M, Antenucci R, Fiacca C, Mancini GB. Long-term results of conservative treatment of fractures of the distal radius. Clin Orthop Relat Res 1986; May(206):202–10. Altissimi M, Mancini GB, Ciaffoloni E, Pucci G. Comminuted articular fractures of the distal radius. Results of conservative treatment. Ital J Orthop Traumatol 1991; 17(1):117–23. Jupiter JB, Fernandez DL, Toh CL, Fellman T, Ring D. Operative treatment of volar intra-articular fractures of the distal end of the radius. J Bone Joint Surg Am 1996; 78(12):1817–28. Byl NN, Kohlhase W, Engel G. Functional limitation immediately after cast immobilization and closed reduction of distal radius fractures: preliminary report. J Hand Ther 1999; 12(3): 201–11. Anderson JT, Lucas GL, Buhr BR. Complications of treating distal radius fractures with external ﬁxation: a community experience. Iowa Orthop J 2004; 24:53–9. Axelrod TS, McMurtry RY. Open reduction and internal ﬁxation of comminuted, intraarticular fractures of the distal radius. J Hand Surg [Am] 1990; 15(1):1–11.

Dorsal Nail Plate Fixation for Distal Radius Fractures & 173 26. Rikli DA, Regazzoni P. Fractures of the distal end of the radius treated by internal ﬁxation and early function. A preliminary report of 20 cases. J Bone Joint Surg Br 1996; 78(4):588–92. 27. Carter PR, Frederick HA, Laseter GF. Open reduction and internal ﬁxation of unstable distal radius fractures with a low-proﬁle plate: a multicenter study of 73 fractures. J Hand Surg [Am] 1998; 23(2):300–7. 28. Kambouroglou GK, Axelrod TS. Complications of the AO/ASIF titanium distal radius plate system (pi plate) in internal ﬁxation of the distal radius: a brief report. J Hand Surg [Am] 1998; 23(4):737–41. 29. Lowry KJ, Gainor BJ, Hoskins JS. Extensor tendon rupture secondary to the AO/ASIF titanium distal radius plate without associated plate failure: a case report. Am J Orthop 2000; 29(10):789–91. 30. Orbay JL, Badia A, Indriago IR, et al. The extended ﬂexor carpi radialis approach: a new perspective for the distal radius fracture. Tech Hand Up Extrem Surg 2001; 5(4):204–11.

31. Orbay JL, Fernandez DL. Volar ﬁxation for dorsally displaced fractures of the distal radius: a preliminary report. J Hand Surg [Am] 2002; 27(2):205–15. 32. Orbay JL, Fernandez DL. Volar ﬁxed-angle plate ﬁxation for unstable distal radius fractures in the elderly patient. J Hand Surg [Am] 2004; 29(1):96–102. 33. Orbay JL, Touhami A, Orbay C. Fixed angle ﬁxation of distal radius fractures through a minimally invasive approach. Tech Hand Up Extrem Surg 2005; 9(3):142–8. 34. Boyer MI, Korcek KJ, Gelberman RH, Gilula LA, Ditsios K, Evanoff BA. Anatomic tilt x-rays of the distal radius: an ex vivo analysis of surgical ﬁxation. J Hand Surg [Am] 2004; 29(1): 116–22. 35. Orbay JL, Touhami A, Indriago IR. Comparison between the volar approach and the minimally invasive dorsal approach in the management of extraarticular distal radius fractures. In: 36th Annual Meeting of the American Association for Hand Surgery, Tucson, AZ, January 11–14, 2006. Chicago, IL: American Association for Hand Surgery. (Ref Type: Abstract).

22 Balloon Reduction and Grafting of Distal Radius Fractures Jose´ M. Nolla

Department of Hand and Upper Extremity Surgery, Massachusetts General Hospital, Harvard Medical School, Boston, Massachusetts, U.S.A.

Jesse B. Jupiter

Orthopedic Hand Service, Massachusetts General Hospital, Harvard Medical School, Boston, Massachusetts, U.S.A.

& INTRODUCTION The concept of “cementing” fractures became a reality with the development of polymethylmethacrylate bone cement in the 1960s (1). Schmalholz in 1988 described the use of polymethylmethacrylate in the management of distal radius fractures (2). This approach has been further supported by several other investigators (3–5). By the same token, problems with polymethylmethacrylate have limited its application. These difﬁculties include its curing with an exothermic reaction, its inability to be incorporated with the host bone, and its requirement for wide exposure of the fracture site. The advent of injectable cements like Norian SRS (Synthes Corp., West Chester, Pennsylvania, U.S.A.) has brought again to the forefront the potential for cementing fractures through a minimally invasive approach. Norian SRS and other new biologic cements are biocompatible and have a higher compressive strength than cancellous bone (6). Norian SRS cures at a physiologic pH and temperature to form an osteoconductive carbonated apatite with properties very similar to the mineral phase of bone (3,6). Several prospective studies have demonstrated the efﬁcacy of Norian SRS over conventional treatments such as cast, pins, and/or external ﬁxation (3,5). One difﬁculty that was recognized in attempting to apply the Norian SRS percutaneously was the observation that the viscous cement did not always ﬁll the metaphyseal defect following manipulative reduction. This proved to be the result of cancellous bony spicules blocking the ﬂow of the Norian cement. As a result, it became evident that it was necessary to compact the metaphyseal bone to accommodate the cement. This task can be accomplished through an open approach where tamps and elevators would be used to create a metaphyseal void. Recently, inﬂatable balloons for “vertebroplasty” have been developed for spine surgery. This technique has also been evaluated in the management of fractures involving metaphyseal bone such as fractures of the calcaneus, tibial plateau, femoral condyles, and distal radius (4). Such a balloon combines the potential of creating a metaphyseal void with its ability to assist with fracture reduction.

& INDICATIONS Balloon reduction and minimally invasive bone grafting techniques are appropriate for active osteoporotic patients with reducible unstable and/or displaced distal radius fractures resulting from low-energy impact. These should be extraarticular (AO type A2 or A3) or simple articular fractures (AO

type C1 or C2) without extension into the diaphysis (Fig. 1). The technique is not applicable to shearing fractures (Barton’s), volar displacement fractures (Smith’s), highly comminuted fractures, high-energy injuries, or nascent malunions, which are more amenable to open techniques. Active infection, severe medical illness, and patient unreliability also are contraindications.

& CONSIDERATIONS FOR PREOPERATIVE PLANNING Careful evaluation of the patient as a whole is important prior to embarking on surgery. It is important to note their activity level, functional independence, reliability, and comorbid medical conditions. Prior to any intervention, it is essential to perform a detailed exam of the involved extremity. A careful examination of the skin and neurovascular status may drastically change the timing of intervention. In the presence of median nerve symptoms, which persist following provisional fracture reduction, a carpal tunnel release should be considered simultaneously with fracture ﬁxation. When the hand and wrist are very swollen, it is beneﬁcial to elevate the limb a few days to allow the soft tissues to heal from the initial injury. Standard posteroanterior, lateral, and oblique radiographs are often sufﬁcient to delineate the fracture pattern. X rays obtained after longitudinal traction is applied will add further clarity to the fracture deﬁnition. Computed tomography may be needed when determining if an articular component is sufﬁciently displaced to negate balloon-assisted treatment. While examining radiographic studies, it is also important to note the carpal alignment and any distal radioulnar joint involvement. It is our perception that balloon-assisted reduction and void creation are optimally combined with percutaneous cement infusion as opposed to the use of other bone substitutes, such as allograft or autogenous graft, which must be applied through more extensile exposures.

& SURGICAL TECHNIQUE Regional block anesthesia is preferred unless medical conditions preclude this approach. Preoperative antibiotics are given for prophylaxis. The patient is placed in supine position with the extremity placed on a radiolucent hand table with a pneumatic tourniquet applied. Fluoroscopy is required. Supplemental ﬁxation in the form of Kirschner (K) wires or an external ﬁxator should also be available. Traction ﬁngertraps can help when extra assistance is not available.

176 & Nolla and Jupiter

A

A1

A2

A3

B

B1

B2

B3

C

C1

C2

C3

FIGURE 1 AO/ASIF classiﬁcation of distal radius fractures. Source: From Ref. 7.

The procedure begins with a manipulative reduction of the fracture (Fig. 2) (8). To insert the balloon cannula, a 1.5–2 cm incision is made between the ﬁrst and second extensor compartments with caution to avoid injury to the overlying radial sensory nerves. The incision should also be placed over the metaphyseal fracture zone. Using a 3.5 mm drill bit with a protective drill sleeve, an opening is created for insertion of the balloon cannula. Using ﬂuoroscopic guidance, the vertebroplasty cannula is centered in the metaphyseal defect with the opening directed distally (Fig. 3). Progressive inﬂation of the balloon with saline will accomplish two things: (i) creation of a metaphyseal void and (ii) fracture reduction. To maintain the reduction following balloon deﬂation, a temporary transﬁxing K-wire is placed between the distal ulna and the radius distal to the metaphyseal defect. Alternatively, an oblique K-wire

can be passed across the fracture site through the radial styloid (Figs. 4 and 5). The Norian SRS is mixed by hand and injected through a separate cannula directly into the defect under ﬂuoroscopic guidance until complete ﬁll of the defect is observed (Figs. 6 and 7). Whenever possible, cement extravasations are to be avoided. The fracture is not to be manipulated for a minimum of 10 minutes to permit the Norian SRS to set properly.

& Postoperative Management Postoperatively, the patient should be placed in a well-molded splint for two weeks. The patient is then placed in a removable splint for four weeks while motion is initiated. If an external ﬁxator was utilized to supplement the phosphate cement, it can

FIGURE 2 Fluoroscopy-assisted closed reduction. Source: Courtesy of Dr Mark Cohen.

Balloon Reduction and Grafting of Distal Radius Fractures & 177

FIGURE 3 The fracture is reduced and the metaphyseal defect is prepared by compacting the cancellous bone with an inﬂatable balloon. The opening in the cannula should open distally to assist in fracture reduction.

be discontinued at two weeks, followed by a removable splint for four weeks. From the ﬁrst postoperative day, all patients should work on digital range of motion and elevation to minimize edema. Occupational therapy should be started two weeks after surgery stressing wrist and forearm range of motion.

& COMPLICATIONS AND THEIR MANAGEMENT The most common complication of using Norian SRS is the loss of fracture reduction. In a prospective study by Cassidy and colleagues, this was observed in 46 out of 161 (29%) patients of which 9 patients required secondary treatment (3). In the series by Sanchez-Sotelo and colleagues, this was observed in 10 out of 55 patients treated with Norian SRS (5).

In a series of 12 patients treated by Reiley with balloon reduction and cementation, 4 patients showed mild subsidence (4). Another potential complication is pin site infections. These are often seen with K-wires and external ﬁxators. They can often be treated with local wound care and oral antibiotics. More severe cases may require pin removal and operative debridement. The superﬁcial radial sensory nerve and its branches are at risk during this approach. These are best avoided by the use of protective drill sleeves and avoiding multiple penetrations of the skin in the same area with the K-wires. Extraosseous cement can be seen in as many as 70% of patients (3). It is best avoided by meticulous application of the Norian SRS. While it dissolves in most with time, it can be associated with other complications including fracture settling,

FIGURE 4 Supplemental ﬁxation. K-wires are used to supplement stability in unstable fractures. Source: Courtesy of Dr Mark Cohen.

178 & Nolla and Jupiter

FIGURE 5 A temporary transﬁxing Kirschner wire is used to maintain the reduction after the balloon is deﬂated.

carpal tunnel syndrome, and tendon attrition. Intra-articular cement is usually not substantial enough to cause any symptoms, but there is one reported case of symptomatic intraarticular cement requiring surgical excision (5).

& OUTCOMES While little has been published combining balloon-assisted reduction with Norian SRS, other reports utilizing with Norian SRS offer favorable results. In a prospective study of 323 patients treated with closed reduction and Norian SRS cement compared to those treated with external ﬁxation and/or percutaneous pinning, those treated with Norian showed an earlier return of function. However, the difference disappeared at 12 months (3). Similarly, in a prospective study

of 110 patients randomized to treatment with closed reduction and Norian SRS cement versus closed reduction alone also showed an earlier return of function in those treated with cement. The difference normalized over 12 months. In this series, the incidence of fracture settling was signiﬁcantly less in those treated with closed reduction and Norian cement compared to those treated with closed reduction alone (5).

& SUMMARY Recent improvements in bone graft substitutes are making it possible to treat distal radius fractures with less invasive and more reliable techniques. Through percutaneous methods using a balloon it is now possible to reduce the fracture and create a well-demarcated metaphyseal void. This void can then

FIGURE 6 The phosphate cement is injected while the temporary Kirschner wire holds the reduction.

Balloon Reduction and Grafting of Distal Radius Fractures & 179

FIGURE 7 Radiographic appearance one year after surgery. Source: Courtesy of Dr Mark Cohen.

be ﬁlled with biologic cements in order to attain stable fracture ﬁxation.

&

Digital motion loss due to adhesions should be avoided by careful wire placement and an early range of motion program.

& SUMMATION POINTS

Indications &

Osteoporotic patient with extra-articular or simple intraarticular low-energy fracture.

Outcomes & &

Patients treated with calcium phosphate cement can be expected to have a quicker functional recovery. Based on available data, fractures supplemented with calcium phosphate cement seem to be less likely to develop settling and/or are less likely to require surgical intervention.

Complications & &

&

Observe for signiﬁcant settling, since malunions can become symptomatic. Extraosseous cement is avoided by meticulous technique. This signiﬁcantly reduces the incidence and extent. Still, a small amount is commonly observed. This dissolves with time and is rarely symptomatic. Supplemental ﬁxation techniques like external ﬁxators and K-wires have inherent risks like neurovascular injury upon application and late pin site infections. These are best avoided by careful technique.

& REFERENCES 1. Hartigan BJ, Cohen MS. Use of bone graft substitutes and bioactive materials in treatment of distal radius fractures. Hand Clin 2005; 21(3):449–54. 2. Schmalholz A, Alberts KA. A scintimetric study of Colles’ fracture. Comparison between cementation and closed treatment. Acta Radiol 1988; 29(6):715–7. 3. Cassidy C, Jupiter JB, Cohen M, et al. Norian SRS cement compared with conventional ﬁxation in distal radial fractures. A randomized study. J Bone Joint Surg Am 2003; 85-A(11):2127–37. 4. Reiley MA. Percutaneous balloon-plasty technique and results for tibial plateau, distal radius and femoral condylar, and calcaneus fractures. In: Poster in Orthopedic Trauma Association Meeting. Toronto, ON, October 11–13, 2002. 5. Sanchez-Sotelo J, Munuera L, Madero R. Treatment of fractures of the distal radius with a remodellable bone cement: a prospective, randomised study using Norian SRS. J Bone Joint Surg Br 2000; 82(6):856–63. 6. Constantz BR, Ison IC, Fulmer MT, et al. Skeletal repair by in situ formation of the mineral phase of bone. Science 1995; 267(5205):1796–9. 7. Jiuliano JA, Jupiter JB. Distal radius fractures. In: Trumble T, Cornwall R, Budoff J, eds. Core Knowledge in Orthopedics: Hand, Elbow and Shoulder. Philadelphia, PA: C.V. Mosby, 2005:87. 8. Fernandez DL. Closed manipulation and casting of distal radius fractures. Hand Clin 2005; 21(3):307–16.

23 Limited Approach Open Reduction and Internal Fixation of Distal Radius Fractures Jose´ M. Nolla

Department of Hand and Upper Extremity Surgery, Massachusetts General Hospital, Harvard Medical School, Boston, Massachusetts, U.S.A.

Jesse B. Jupiter

Orthopedic Hand Service, Massachusetts General Hospital, Harvard Medical School, Boston, Massachusetts, U.S.A.

& INTRODUCTION The treatment of distal radius fractures has undergone a number of changes in recent years. These have been the result of better understanding of fracture patterns, design of implants, and developments in implant technology. The comprehensive AO classiﬁcation, as well as work by Fernandez, and the column theory advocated by Rikli and Regazzoni and Medoff have brought light to key components in distal radius fractures (1,2). Understanding of the key components in the structural support of the distal radius articular surface has allowed the development of implants that provide the needed support in cases of compromised stability. The key components as described by Rikli and Regazzoni include a medial (ulnar) column, which consists of the distal ulna, triangular ﬁbrocartilage complex (TFCC), and distal radioulnar joint (DRUJ) (Fig. 1) (2). The intermediate column consists of the medial aspect of the radius including the lunate fossa and sigmoid notch. The lateral (radial) column consists of the scaphoid fossa and radial styloid. Studies of force transmission across the wrist have demonstrated more forces transmitted through the intermediate column than previously thought. When looking at the lunate facet of the distal radius, the axial forces vary between 29% and 44% of the total axial force (Rikli DA, personal communication). One can therefore view the role of the radial column as a stability column, providing a bony buttress for the carpus and the origin for the stabilizing capsular ligaments. In contrast, the intermediate column functions in load transmission and serves as the “keystone” to the radiocarpal joint. The ulnar column serves both for load transmission and stability acting as a “pivot point” for wrist mobility. With a clearer understanding of the structural anatomy and biomechanics of the distal radius, radiocarpal, and distal radioulnar joints, fragment-speciﬁc fracture treatment with limited surgical approaches is applicable for a variety of fracture patterns.

including the volar and/or dorsal lunate facets, and the ulnar column, speciﬁcally, the ulnar styloid fracture.

& CONSIDERATIONS FOR PREOPERATIVE PLANNING A distal radius fracture can affect anyone and therefore it is essential to have a clear understanding of the patient’s activity level, co-morbid medical conditions, independence level, and reliability. During the physical examination it is important to note the neurovascular status of the hand as well as the status of the skin. Excessive skin swelling without median nerve symptoms beneﬁts from a period of elevation to facilitate softtissue management. Radiographic examination should include standard anteroposterior, lateral, and oblique views. In cases of extensive collapse, longitudinal traction ﬁlms under hematoma block anesthesia are extremely helpful. Computed tomography, with reconstructions in the coronal and sagittal planes as well as three-dimensional reconstructions, is helpful to elucidate speciﬁc fragments (Fig. 2). During examination of the radiographs it is important to note any evidence of carpal malalignment or derangement. Other pieces of information to obtain from the radiographs are fracture fragment recognition and fracture classiﬁcation. It is essential to recognize radial styloid fragments, lip fragments, volar- and dorsal-ulnar fragments, and ulnar styloid fragments. This knowledge will guide the therapeutic approach. The last piece of information to get from the radiographs is classiﬁcation as this assists with communication, treatment decisions, and prognosis. The most thorough classiﬁcation system is the AO/ASIF system. It takes into consideration the severity of the skeletal and articular injury. In this system the fractures are divided into extra-articular (type A), partial articular (type B), and complete articular (type C). Each is then subdivided in increasing order of severity (Fig. 3).

& SURGICAL TECHNIQUE & INDICATIONS FOR LIMITED APPROACH OPEN REDUCTION AND INTERNAL FIXATION A number of speciﬁc fracture patterns are amenable to limited exposures for internal ﬁxation. These include fractures of the radial column involving the radial styloid, intermediate column

Regional block anesthesia is preferred. Preoperative antibiotics are given for prophylaxis. The patient is placed in the supine position with the extremity on a radiolucent hand table. A pneumatic tourniquet is applied. Fluoroscopy will be required. One should have available a variety of ﬁxation options including stainless steel wire, Kirschner wires,

182 & Nolla and Jupiter

shearing-type fracture, while B1.2 represents a multi-fragmented radial styloid fracture. These fractures may be isolated injuries as a result of a fall on the outstretched hand with the wrist forced into extension and radial deviation. The scaphoid directly transmits the force of impact onto the radial styloid. Styloid fractures can also be seen in association with perilunate dislocations of the carpus. Smaller avulsion fractures will have the radial capsule attached while larger ones will additionally have the origin of the radioscaphocapitate ligaments. Anatomic reduction and stable internal ﬁxation of these fractures will restore both alignment of the radial column’s buttress as well as the integrity of the supporting ligaments of the wrist. An attempt should be made to achieve a closed manipulative reduction and percutaneous Kirschner wire or screw ﬁxation. When a closed reduction is not successful, open reduction is recommended. A small dorsoradial incision will provide excellent exposure of the fracture and if necessary, the radiocarpal joint (Fig. 4). Stable ﬁxation most often will require one or two screws, but in some instances, a small radial column plate will help buttress a large vertically sheared styloid fracture (Figs. 5 and 6).

& Intermediate Column Fractures

FIGURE 1 Rikli and Regazzoni’s division of the distal radius into three columns (medial, intermediate, and lateral).

external ﬁxation, and anatomically shaped plates or wire forms. A number of limited extensile exposures are available to approach either dorsal or volar fracture components (Fig. 4).

& Radial Column Fractures Shearing fractures of the radial column are classiﬁed within the AO/ASIF Group as B1 fractures. The subgroup B1.1 is a vertical

While the vast majority of these fractures are due to axial compression of the lunate against the lunate facet, there is a unique fracture pattern involving the dorsal lunate facet characterized by a vertical shear pattern classiﬁed as subgroup B1.3. Dorsal lunate facet compression fractures are most often a component of a three-part articular injury or a four-part pattern characterized by a split of the lunate facet with both dorsal and volar components (Fig. 7). In some instances, the dorsal lunate facet fracture can be reduced through a small incision and manipulated into place with an elevator, tamp, or pointed awl. Stability is achieved with either strategically placed Kirschner wires or a small plate or wire-form (Figs. 7 and 8). Volar lunate facet displacement is less amenable to percutaneous manipulation and Kirschner wire ﬁxation. A limited volar incision is made creating an interval between the ulnar artery and nerve, and the ﬂexor tendons (Fig. 9). By elevating

FIGURE 2 Computed tomography scan can assist in elucidating the involved columns in complex fractures.

Open Reduction and Internal Fixation of Distal Radius Fractures & 183

& Ulnar Column

A

A1

A2

A3

B

B1

B2

B3

C

C1

C2

C3

FIGURE 3 AO/ASIF classiﬁcation of distal radius fractures. Source: From Ref. 3.

the distal ulnar corner of the pronator quadratus, the volar lunate facet is readily exposed. Internal ﬁxation can be accomplished either with a tension wire technique or a small plate or wire-form (Figs. 7, 9–12).

There are instances in which the stability of the distal radioulnar joint will require stable ﬁxation of the ulnar styloid. Following stable ﬁxation of the distal radius fractures, passive forearm rotation will deﬁne the presence of distal radioulnar joint instability. In these instances, especially when there is a large ulnar styloid fracture, ﬁxation of the ulnar styloid is recommended. The ulnar styloid lies relatively anterior to the longitudinal axis of the ulna, thus the surgical approach should be through a small incision over the styloid itself. If done with the forearm supinated, the styloid will rest in a more dorsal position, facilitating exposure and internal ﬁxation. The ﬁxation of the ulnar styloid will depend in part upon its size. Small screws, headless screws, or tension band wire or wire-forms are all applicable (Figs. 14 and 15).

& COMPLICATIONS AND THEIR MANAGEMENT Open approaches are at risk of wound healing problems, the most severe being wound necrosis. Prevention is best treatment in these situations. The surgeon should be cautious and not proceed with the surgery until the soft tissues have recovered from the initial soft-tissue trauma. Complex fractures at times cannot be securely ﬁxed with internal hardware only. In these cases, it is useful to have an external ﬁxator available. The ﬁxator can help not only with the fracture reduction, but also with maintenance of the reduction. In this situation, the ﬁxator is kept in place for at least three weeks. Bone graft can also be used to supplement ﬁxation, particularly for support of articular fragments. Bone graft will also assist in fracture healing. The median nerve and the sensory branches of the radial nerve are at risk during some approaches to the wrist. Excessive retraction of the median nerve can lead to signiﬁcant motor and sensory disturbances. Minimizing the use of self-retaining retractors and frequent changing of their positions during volar approaches minimizes the incidence of neuropathies. Careful dorsal dissection minimizes damage to the superﬁcial sensory branches of the radial nerve. Peritendinous adhesions can severely limit digital motion. This complication is best avoided by covering dorsal and volar hardware with periosteum and/or muscle and by promptly starting a digital and wrist motion protocol soon after surgery. Severe cases that have failed to improve with range of motion exercises and splinting may require operative tenolysis and capsulotomies. Dorsal instrumentation places the extensor tendons at risk for complications, namely, tenosynovitis and tendon rupture. Whereas this risk was signiﬁcant with prior implants, newer implants have been designed with the goal of minimizing tendon irritation. If tenosynovitis is still encountered, it is best addressed by plate removal. Tendon rupture is best addressed with plate removal and an appropriate tendon transfer.

& OUTCOMES FIGURE 4 Dorsal approaches to the wrist. 1, between the ﬁrst and second extensor compartments; 2, through the third compartment; 3, between the fourth and ﬁfth compartments; 4, between the ﬁfth and sixth compartments. Source: Adapted from Ref. 4.

The important aspect in obtaining a good result in these fractures is attaining and maintaining an adequate articular alignment (9,10). Work by Jakob and colleagues using the same principles outlined above revealed greater than 95%

184 & Nolla and Jupiter

FIGURE 5 Fixation of radial and dorsal intermediate columns with 3.5 and 4.0 mm screws accomplished through minimal incisions. Source: Courtesy of Dr Diego L. Fernandez; From Ref. 5.

FIGURE 6 Radial column buttressed with a radial plate. Source: Courtesy of Dr Robert J. Medoff.

FIGURE 7 (A) Axial loads transmitted can result in a four-part fracture with the lunate fossa split into a volar and a dorsal piece. (B) In this model, the radial styloid fragment has been stabilized with Kirschner wires. (C) The volar lunate facet is stabilized with a plate. (D) The dorsal lunate fragment is stabilized with a Kirschner wire. (E) The distal radioulnar joint should then be evaluated for instability, especially when the ulnar styloid has been fractured through its base. Source: Adapted from Ref. 6.

Open Reduction and Internal Fixation of Distal Radius Fractures & 185

FIGURE 8 Radial styloid and dorsal ulnar fragments stabilized with columnar pin plates. Source: Courtesy of Dr Robert J. Medoff.

FIGURE 9 Volar ulnar approach between the ulnar artery/nerve and ﬂexor tendons. Source: Adapted from Ref. 7.

186 & Nolla and Jupiter

FIGURE 10

Small volar ulnar fragment ﬁxed with 24-gauge wire. Source: From Ref. 8.

FIGURE 11 Split lunate facet with large volar fragment.

Open Reduction and Internal Fixation of Distal Radius Fractures & 187

good and excellent results (11). In their treatment of 74 fractures, of which 58 were severely comminuted, they were able to effectively treat them using dual dorsal titanium plates. In their early experience they had ﬁve cases of tendon rupture, which did not occur again once they stopped cutting the distal extent of their plates. Similarly, in their treatment of 12 patients with mini-fragment titanium plates, Martinez and colleagues obtained 11 excellent results and one good result according to the Gartland and Werley Scale (12). They had no cases of tendon irritation at an average follow-up of 18 months.

(A)

(B)

& SUMMARY

FIGURE 12 Fracture from Figure 11. (A) The volar fragment has been buttressed with a plate and the radial styloid has been stabilized with Kirschner wires. (B) X-rays 1 year after surgery.

Recent improvements in the understanding of distal radius fracture patterns, design of fragment-speciﬁc implants, and developments in implant technology have revolutionized the care of this injury. It is now possible to speciﬁcally tailor incisions to ﬁt speciﬁc fracture patterns with small implants that minimize soft-tissue irritation. These implants provide strong ﬁxation, which can withstand early motion. As a result, excellent outcomes can be attained with minimal complications.

FIGURE 13 Clinical result for fracture in Figure 11 six months after surgery.

188 & Nolla and Jupiter

FIGURE 14 Ulnar styloid stabilized with tension-band construct.

& SUMMATION POINTS

&

Indications &

&

Intra-articular AO type B fractures including fractures of the radial column involving the radial styloid, intermediate column including the volar and/or dorsal lunate facets, and the ulnar column, speciﬁcally, the ulnar styloid fracture. More extensile approaches are needed for those with severe shortening and those with extensive intra-articular involvement (AO group C), especially if they extend into the diaphysis.

Outcomes &

Complications &

& &

Excellent to good results can be expected as long as articular alignment is obtained and maintained.

FIGURE 15

Use of newer, low proﬁle dorsal implants and avoidance of plate cutting, minimizes the incidence of tendon irritation and/or rupture

Wound necrosis is best avoided by allowing the soft tissues to stabilize from the initial trauma prior to embarking on surgical treatment. An early motion protocol can minimize the incidence of peritendinous adhesions. Dorsal instrumentation should not be cut and should be covered with periosteum to minimize extensor tendon irritation.

Ulnar styloid fracture stabilized with pin plate. Source: Courtesy of Dr Robert J. Medoff.

Open Reduction and Internal Fixation of Distal Radius Fractures & 189

& REFERENCES 1. Rikli DA, Regazzoni P. Fractures of the distal end of the radius treated by internal ﬁxation and early function. A preliminary report of 20 cases. J Bone Joint Surg Br 1996; 78(4):588–92. 2. Fernandez DL, Jupiter JB. Fractures of the Distal Radius. New York: Springer, 1995. 3. Jiuliano JA, Jupiter JB. Distal radius fractures. In: Trumble T, Cornwall R, Budoff J, eds. Core Knowledge in Orthopedics: Hand, Elbow and Shoulder. Philadelphia, PA: C.V. Mosby, 2005:87. 4. Fernandez DL, Jupiter JB. Fractures of the Distal Radius. New York: Springer, 1995:70. 5. Jupiter JB, Ring DC. Wrist—distal radius. AO Manual of Fracture Management: Hand and Wrist. New York: AO Publishing, 2005:251. 6. Fernandez DL, Jupiter JB. Fractures of the Distal Radius. New York: Springer, 1995:97.

7. 8. 9. 10. 11. 12.

Fernandez DL, Jupiter JB. Fractures of the Distal Radius. New York: Springer, 1995:79. Jupiter JB, Ring DC. Wrist—distal radius. AO Manual of Fracture Management: Hand and Wrist. New York: AO Publishing, 2005:215. Knirk JL, Jupiter JB. Intra-articular fractures of the distal end of the radius in young adults. J Bone Joint Surg Am 1986; 68(5):647–59. Slutsky DJ. Predicting the outcome of distal radius fractures. Hand Clin 2005; 21(3):289–94. Jakob M, Rikli DA, Regazzoni P. Fractures of the distal radius treated by internal ﬁxation and early function. A prospective study of 73 consecutive patients. J Bone Joint Surg Br 2000; 82(3):340–4. Martinez AA, Canales V, Cuenca J, Herrera A. Minifragment plating for fractures of the distal radius. Acta Orthop Belg 2004; 70(4):311–4.

24 Repair of Distal Radial Malunions with an Intramedullary Nail John T. Capo, Damon Ng, and Virak Tan

Department of Orthopedics, The New Jersey Medical School, University of Medicine and Dentistry of New Jersey, Newark, New Jersey, U.S.A.

& INTRODUCTION Fractures of the distal radius are one of the most common fractures that are treated by orthopedic surgeons. They account for up to 20% of all fractures seen in the emergency department (1,2). There is a bimodal age distribution, occurring most commonly between the ages of 5 to 14 and 60 and 69 years. Within the second age group, there is a predominance of female patients with a ratio of approximately 4:1. Also within this age group, the fracture is usually the result of a low energy injury; typically the patient presents after a fall on an outstretched hand. The accelerating body weight produces a bending moment on the distal forearm, and the distal radius fails through the softer metaphyseal bone. The result usually is a displaced, extraarticular metaphyseal fracture of the distal radius. Extraarticular distal radius fractures without signiﬁcant comminution typically prove to be stable after closed reduction and are usually amenable to cast immobilization. This was historically thought to be so often the case, that in 1814 Abraham Colles suggested, “the limb will at some remote period enjoy perfect freedom in all of its motions and be completely exempt from pain” (3). However, with further understanding of the anatomy surrounding the distal radius and the increased physical demands of patients, the effect of distal radial malunions have received increased attention in the past several decades. Malunion is actually the most common complication following a distal radius fracture (4). Distal radial malunions can result from inappropriate initial treatment or failure of appropriate treatment due to osteopenia or fracture comminution. The clinical result from a malunion is variable as X-ray ﬁndings do not always correlate with patient symptoms and function (5). Often patients with malunions can be plagued by pain, limited range of motion (ROM), decreased grip strength, and poor cosmesis. Corrective osteotomy for distal radial malunions has been described as early as the 1930s by Ghormley and Mroz (6). As osteosynthesis techniques evolved, so did the treatment for distal radial malunions. Currently, the “gold-standard” of surgical intervention for malunions is osteotomy followed by internal ﬁxation as described by Diego Fernandez (5). The osteotomy is carefully planned to correct the deformity, the resulting defect is replaced with bone graft, and the ﬁnal position is stabilized rigidly with plates and screws. Traditionally for dorsally displaced malunions, a direct approach with dorsal plating has provided excellent results (7). With the advent of locked plates, a volar approach has also been utilized (8–10). These locked plates placed on the volar surface have a theoretical advantage of less tendon irritation. However, direct visualization of the correction cannot be achieved and an external plate still needs to be applied. Elevation and stripping

of the pronator quadratus is required and there is a potential for decreasing vascularity to the region. Intramedullary (IM) nail ﬁxation for distal radius fractures has recently been described with promising results (11,12). The IM nail is inserted through the radial styloid, spans the length of the fracture, and is ﬁxed proximally and distally. As with all locked IM implants, it acts as a load sharing device rather than load bearing. Fixed angle interlocking screws stabilize the distal fragment while locking bolts proximally provide length stability. Also, like other IM devices, a limited approach is used to deploy the device with very little soft tissue being disrupted. By deﬁnition an IM device rests within the conﬁnes of the bone. Therefore, there is no external hardware to cause tendon irritation and attrition. In the case of distal radial malunions, the correction is directly visualized dorsally and the nail is deployed into the bone through a limited approach at the radial styloid.

& INDICATIONS Classic radiographic anatomic criteria for acceptable healing in the distal radius is: radial shortening of !3 to 5 mm, radial inclination O158, sagittal tilt on the lateral projection between 108 dorsal tilt and 208 volar tilt, and incongruity of intraarticular fractures !1 to 2 mm at the radiocarpal joint (13). Distal radial fractures that heal outside of these parameters and that present with clinical deformities are candidates for osteotomy, bone grafting and ﬁxation with an IM nail. From the perspective of functional limitation, a distal radial malunion disrupts the normal mechanics of the wrist including ROM, load distribution, and force coupling between the forearm, wrist, and hand (14–16). In the case of a dorsal malunion, as the distal radial articular surface is directed dorsally, the amount of wrist ﬂexion decreases and extension motion increases. This altered anatomy disrupts the pull of the wrist ﬂexors and extensors. As the deformity worsens, compensatory midcarpal instability ensues. The midcarpal joint creates a dorsal intercalated segmental instability pattern to compensate for the extended position of the distal radius and proximal carpal row. In addition, load proﬁle between the carpus and the distal radius is altered. The load is shifted dorsally with the distal radius being point loaded. With distal radial deformity, the distal radial–ulnar joint (DRUJ) can become subluxated and is subjected to altered load forces. In his study, Palmer demonstrated that the load transmitted through the distal ulna increased from 21% to 67% as the volar angulation of the distal radius increased from palmar tilt of 108 to a dorsal tilt of 458 (17,18). As the distal radius is shortened, it brings with it the triangular ﬁbrocartilage complex (TFCC); this abnormal

192 & Capo et al. (A)

(A)

(B)

(B)

FIGURE 2 (A) Two centimeter radial sided incision centered over radial styloid and (B) the interval between the ﬁrst and second dorsal compartments has been used. The tendons and superﬁcial radial nerve are retracted to expose the radial styloid. Source: Courtesy of John T. Capo, MD.

corrective osteotomy and ﬁxation with an IM nail is not indicated. In these late stage situations, the extraarticular alignment is no longer the main issue. Salvage procedures such as arthrodesis and arthroplasty should be considered.

& CONSIDERATION FOR PREOPERATIVE PLANNING FIGURE 1 (A) Anteroposterior and (B) lateral views of an established distal radial malunion. The alignment shows that the radius is short, dorsally angulated and that the inclination is decreased. Source: Courtesy of John T. Capo, MD.

tensioning of the TFCC blocks normal sweep of the TFCC over the head of the ulna which in turn can limit normal motion of the DRUJ (1,5). Clinically, these altered load proﬁles, instability and sites of possible arthrosis can be manifested as pain and functional limitations. Osteotomy and ﬁxation with an IM device is ideally suited for malunited extraarticular distal radius fractures which are either dorsally or volarly angulated. The patient typically has pain in the dorsal or ulnar wrist and is unhappy with the cosmesis of the extremity. Issues of bony defects do not represent signiﬁcant problems as bone graft or bone substitute can be placed at the site of the osteotomy. In cases of distal radius fractures with limited extension into the articular surface, osteotomy and ﬁxation with an IM device can be utilized if the articular surface can be stabilized ﬁrst. In the case where there is signiﬁcant arthrosis and deformity as a result of a long standing established malunion,

& Preoperative Evaluation The ﬁrst step in evaluating a patient with a distal radial malunion is a complete history and physical exam. One must elucidate the details surrounding the injury including mechanism of injury and importantly the time since index injury in order to determine the chronicity of the malunion (19). Patient related factors such as general health, associated medical problems, hand dominance, occupation and level of activity must be evaluated. Assessment of the post injury wrist must include degree of functional limitation in daily and vocational activities, and the frequency, duration and quality of pain in the wrist (including narcotic and analgesic requirement). Careful exam of both the affected and the unaffected extremity is imperative. The location of the pain must be clearly identiﬁed. Examination must include palpation directly at the fracture site, in the DRUJ, the radial-carpal joint and the ulnar-carpal joint. The following provocative maneuvers should be performed: axially loading on the ulnarly deviated wrist, palpation of the scapholunate interval and evaluation of stability of the carpus and DRUJ. The ROM in ﬂexion, extension, pronation, supination, radial, and ulnar deviation should be recorded.

Repair of Distal Radial Malunions with an Intramedullary Nail & 193

Grip strength measurements must be made. Motor and sensory exam of the wrist and hand is critical, as median nerve compression from a severely dorsally angulated malunion can occur.

& Preoperative Imaging

FIGURE 3 Dorsal incision for exposure of the malunion and placement of the proximal locking bolts. The proximal hash marks represent the limits of the incision for screw insertion only, as in an acute fracture. Source: Courtesy of John T. Capo, MD.

Straight anterior–posterior, oblique and true lateral views of the affected wrist need to be obtained. A similar series of the contralateral wrist helps with planning the degree of correction. The radiocarpal and midcarpal joints should be examined for arthrosis. Shortening of the distal radius produces abnormal loading of the carpus on the distal ulna, so careful attention must be made toward the ulnacarpal articulation. There may be cysts in the distal ulna or proximal lunate with ulnarcarpal impaction. A computed tomography scan is an adjunct that can be employed but is not always necessary. Situations in which it can be best utilized include evaluation of DRUJ for arthrosis and congruence, and three dimensional visualization of the distal radial deformity.

(A)

(B)

FIGURE 4 (A) The second and fourth dorsal compartments are elevated in a subperiosteal manner and the malunion is exposed. The extensor pollicis longus muscle belly can be seen proximally and (B) the malunion is found and then opened with an osteotome. Source: Courtesy of John T. Capo, MD.

194 & Capo et al. (A)

measured on the lateral radiograph of the wrist. Accurate lateral radiographs must be obtained for the affected and normal wrists. In a true lateral view of the wrist, the pisiform lies between the scaphoid tubercle and the volar cortex of the capitate. In planning for the distal radial osteotomy, the size of the defect needs to be estimated to determine the dimensions and type of bone graft necessary. Nascent malunions often have a signiﬁcant amount of hypetrophic callus which can be used as local cancellous graft. In the case of an established malunion where correction of the shortening and angulation will produce a gap which requires a signiﬁcant amount of bone graft, one must plan to either harvest iliac crest autograft or have allograft or synthetic bone graft available (Fig. 1). When harvesting iliac crest, it is not absolutely necessary to harvest structural graft; recent literature has demonstrated similar rates of union and maintenance of correction when either structural or cancellous iliac autograft were used (20).

& SURGICAL TECHNIQUE (B)

& Operating Room Setup and Equipment A radiolucent hand table or radiolucent arm-board long enough to adequately support the wrist are necessary. An image intensiﬁer, either a mini ﬂuoroscopy unit or a standard C-arm is required. Instrumentation which should be available is a basic fracture reduction set including bone holding and reduction clamps, periosteal elevators, a sharp dental pic, osteotomes, mallets, and ronguers. A power saw such as a microsagittal saw should also be available. General anesthesia is preferred due to the possible requirement of performing an iliac crest bone graft.

(C)

& OPERATIVE TECHNIQUE & Dorsal Malunion

FIGURE 5 (A) The Micronaile has three divergent distal screws that lock into the nail, (B) the outrigger jig is assembled with the appropriate nail and proximal locking guide attached, and (C) the nail is inserted into the channel made in the radial styloid. The drill sleeve is inserted in the dorsal locking guide for drilling of the proximal locks. Source: Courtesy of John T. Capo, MD.

Preoperative planning of the osteotomy is templated off the normal wrist (5). On the anteroposterior, zero rotation radiograph, shortening is measured between the distal surface of the ulna and the lunate facet of the distal radius. The degree of radial inclination is also measured on the anteroposterior radiograph. If the inclination is decreased, the osteotomy will be opened more on the radial side and a trapezoidal shaped bone graft will be needed. The degree of dorsal or volar tilt is

The patient is positioned supine with the arm abducted 908 and placed on a radiolucent hand table. A nonsterile tourniquet is used on the upper arm, and the arm is prepped and draped in a standard fashion. Using the image intensiﬁer the location of the malunion and the site of the proposed osteotomy are marked out. Once the anatomy and the site of the osteotomy are deﬁned, the extremity is exsanguinated with an Esmarc bandage and the tourniquet is inﬂated. A direct radial incision is made between the ﬁrst and second dorsal compartments at the level of the radial styloid (Fig. 2A). Care is taken to identify and protect branches of the radial sensory nerve. These nerves are usually within the dorsal or volar softtissue ﬂaps. Dissection is then carried down to the level of the radial styloid (Fig. 2B). This will mark the point of insertion of the IM nail. Once the approach for the nail is completed, attention is directed at the malunion. A second dorsal longitudinal incision is made directly over the level of the malunion (Fig. 3). This second incision is the working portal through which the nonunion will be taken down, and also where the proximal locks will be placed. The skin incision is carried deep through the subcutaneous tissue and the extensor retinaculum is identiﬁed. The extensor pollicis longus (EPL) tendon is found distally and the third dorsal compartment is released from distal to proximal. The second and fourth compartments are then elevated in a subperiosteal manner and the nonunion is exposed (Fig. 4A).

Repair of Distal Radial Malunions with an Intramedullary Nail & 195 (A)

(B)

FIGURE 6 (A) After the malunion has been corrected and held with Kirschner (K) wires the nail is inserted and locked proximally and distally and (B) the osteotomy defect has been ﬁlled with iliac crest graft placed around the nail with the cortical portion placed dorsally. Source: Courtesy of John T. Capo, MD.

If it is a nascent malunion, often the fracture line can be found using either an osteotome or an elevator. If the fracture is more completely healed then a power saw or an osteotome is used to cut the radius at the apex of the deformity (Fig. 4B). The osteotomy should be perpendicular to the longitudinal axis of the radius in the coronal and sagittal planes. The volar periosteum can be left intact to facilitate hinging open the osteotomy, while laminar spreaders can be used to open the defect dorsally. Often the brachioradialis as well as the periosteum must be completely released. The osteotomy should be opened until the proper volar tilt and inclination is restored. If inclination needs to be increased, the radial side of the osteotomy site will require more distraction. When the distal fragment alignment approximates the contralateral wrist, the fragment is stabilized with Kirschner (K) wires. The ﬁrst wire is placed retrograde along the ulnar border of the radius and the second is placed from the radial styloid, but in a dorsal position to avoid the path of the nail. Once the deformity is provisionally stabilized attention is turned back to the IM nail insertion. The nail guide wire is placed at the styloid roughly 5 to 6 mm proximal to the articular surface. The cannulated reamer is next used to

enter the radius, and sequentially larger broaches are used to open the canal. The appropriate IM nail is assembled to the jig with the corresponding proximal locking guide. The nails and proximal locking guides are color matched to avoid confusion. The nail is then inserted through the styloid incision and is placed below the K-wires to the appropriate level (Fig. 5). The three distal screws are placed and locked to the nail. At this point, the distal fragment, attached through the nail and jig, can be distracted or angulated to make ﬁne adjustments in the position of the corrective osteotomy. The nail is then locked proximally in an open fashion through the proximal aspect of the dorsal incision. Next the appropriate bone graft is placed around the nail. If it is a nascent malunion, often the local callous can be morselized, combined with demineralized bone graft and inserted in the defect. If a very small defect results, a synthetic calcium sulfate or phosphate replacement can be used. For large structural defects, we prefer cortico-cancellous bone graft taken from the anterior iliac crest (Fig. 6). The graft can be split into two fragments and inserted alongside the nail, or a single piece can be inserted ﬁrst and the nail placed through the graft. After the nail and graft are inserted the K-wires can usually be removed (Fig. 7).

196 & Capo et al. (A)

(A)

(B)

(B)

FIGURE 8 (A) Anteroposterior and (B) lateral views of a distal radial malunion with excessive volar angulation. Source: Courtesy of John T. Capo, MD.

FIGURE 7 Follow-up radiographs showing: (A) anteroposterior and (B) lateral views of correction of the dorsal malunion. The Micronaile is placed in the center of the intramedullary canal and the most distal screw is ideally placed subchondral to the articular surface. Early graft consolidation can be seen. Source: Courtesy of John T. Capo, MD.

& Volarly Angulated Malunion In the case of volarly displaced malunions, the procedure is technically the same with the exception of the approach to the malunion (Fig. 8). The Henry approach to the volar radius is

utilized for exposing and directly correcting the malunion, while the nail is still inserted through the standard radial styloid approach (Fig. 9). Alternatively, once incision alone can be used. The styloid, nail insertion site, can be approached through an extension of the volar Henry approach in a distal and radial oblique fashion. The location of the apex of the malunion and subsequent osteotomy is identiﬁed and the malunion is divided with either an osteotome or a sagittal saw. The distal fragment is then aligned and stabilized with K-wires. The IM nail is placed through the radial styloid but the nail is locked volarly through the Henry approach. This requires mounting the nail on the insertion jig in a reversed fashion. The nail is locked distally and proximally and the graft is inserted volarly (Figs. 10 and 11). The provisional K-wires are removed and the wrist is checked for ROM and

Repair of Distal Radial Malunions with an Intramedullary Nail & 197

(A)

(B)

FIGURE 9 Clinical photograph demonstrating a volar Henry approach for visualization and correction of the malunion and a radial incision for insertion of the nail. The dorsal Kirschner (K) wires are holding the corrected malunion in place. Source: Courtesy of John T. Capo, MD.

stability. If the DRUJ is unstable it should be addressed at this time (Fig. 12).

& Closure and Postoperative Management Through the dorsal wound the retinaculum is closed using a 2-0 nonabsorbable sutures and the EPL tendon is left transposed. The subcutaneous tissue is closed using 2-0 absorbable suture and the skin of both incisions is closed with nylon sutures. A short arm splint is placed in the operating room and the patient is discharged that day or the next morning. Finger ROM is encouraged immediately and the patient is seen in the ofﬁce in 10 to 14 days. Sutures are removed, gentle wrist ROM is started, with an orthoplast splint worn between exercises. Healing typically occurs in 8 to 10 weeks.

& Illustrative Case Example: Nascent Malunion The patient is a 23-year-old right hand dominant male laborer who sustained an extraarticular distal radius fracture. He was initially managed with cast immobilization and eventually presented to our clinic approximately three months post injury. Preoperative X-rays revealed a healing fracture with 278 of dorsal angulation and signiﬁcant shortening (Fig. 13). Because of the patient’s high-functional demands and the associated increased risk of late degenerative arthritis, operative correction of the malunion was indicated. He underwent open correction of his malunion through a dorsal approach and stabilization with a Micronaile (Wright Medical Technology Inc., Arlington, Tennessec, U.S.A.) with local cancellous grafting from his malunion site. Five months postoperatively the patient is doing very well. He is pain free. Grip strength is 90% of the contralateral side, extension is 408, ﬂexion 708, supination 858, pronation 908. Recent X-rays reveal restoration of distal radial volar tilt, inclination and height (Fig. 14).

FIGURE 10 (A) Fluoroscopic image showing the osteotomy gap opened and stabilized with two dorsal Kirschner (K) wires. The third, most radial wire in the styloid is the guide wire for reaming and nail insertion and (B) the guide wire is removed and the broach is used to create a path for the nail. Source: Courtesy of John T. Capo, MD.

& COMPLICATIONS Complications are inherent to any surgical procedure. Use of this implant for distal radial malunions is relatively new. To date, there have been few reported complications. The radial sensory nerve is at risk during the approach to the radial styloid. In the authors reported series of acute fractures, two patients had a temporary minor radial sensory nerve disturbance (11,12). Symptoms resolved in all of these patients within two months. Other theoretical risks speciﬁc to this procedure are risk of graft dislodgement because there is no plate to incarcerate the graft.

198 & Capo et al. (B)

(A)

FIGURE 11 (A) The nail is mounted on the jig with the proximal locking guides on the volar surface of the wrist and (B) this allows the proximally screws to be place through the open volar approach using the appropriate guide. Source: Courtesy of John T. Capo, MD.

Firm impaction of the graft ensures stability, and an additional K-wire may be left in place for three weeks if desired. We have not seen this complication occur in our experience. The risk of nonunion of the osteotomy appears to be similar to conventional plating. If non or delayed union occurs, the strength of the nail would minimize hardware failure and make repeat grafting easier. The risk of tendon irritation and rupture is lower than dorsal plate application, since the implant is buried entirely within the distal radius.

& OUTCOMES Many different authors have demonstrated excellent outcomes for corrective osteotomies for displaced distal radial malunions. (A)

Diego Fernandez has had several series which reported his results for both dorsally and volarly displaced distal radius fractures (5,21–24). In a series published in 1982 (24), he performed an opening wedge osteotomy on either the dorsal or volar surface depending on the initial direction of displacement. The osteotomies were stabilized with a buttress plate based on the side of the osteotomy. Rigid ﬁxation allowed for early postoperative ROM. Patients went on to maintain the correction radiographically and improve functionally. With this approach, he found good to excellent results in 75% of the patients. The patients that had the best outcome had greater preoperative ROM and no existing degenerative changes in the radiocarpal joint. However, approximately 40% of the patients underwent subsequent operation to remove the hardware. (B)

FIGURE 12 (A) Anteroposterior and (B) lateral follow-up x-rays demonstrating restored near anatomic alignment of the distal radius. After ﬁxation with the intramedullary nail the distal radial–ulnar joint was found to still be unstable. This was reduced closed and stabilized with Kirschner (K) wires proximal to the nail. These wires can be seen on the lateral view. Source: Courtesy of John T. Capo, MD.

Repair of Distal Radial Malunions with an Intramedullary Nail & 199 (A)

(B)

FIGURE 13 (A) Anteroposterior and (B) lateral views of a nascent malunion demonstrating severe shortening and dorsal angulation of the distal radius. Source: Courtesy of John T. Capo, MD.

(A)

(B)

FIGURE 14 (A) Anteroposterior and (B) lateral radiographs showing restoration of normal articular anatomy. Local cancellous graft was used from the nonunion site and placed in the defect. Source: Courtesy of John T. Capo, MD.

200 & Capo et al.

There were also two cases of tendonitis of the EPL but no cases of tendon rupture. With the advent and evolution of ﬁxed angled locking plates, their use has spread to distal radial osteotomies. In a series by Malone et al. in 2006 (10), volarly based locking plates were employed to stabilize dorsally displaced distal radial malunions augmented with cancellous bone graft. Results demonstrated maintenance of correction on followup radiographs, improved disabilities of the arm, shoulder, and hand (DASH) scores, and grip strength and ROM that approached that of the uninjured side. The authors reported one complication; a fracture seven months after the time of the injury at a site proximal to the plate after a fall. At the time of the repeat surgery, there was evidence of union at the site of the osteotomy. There were no reports of tendon irritation, decreased ﬁnger or hand ROM, hardware problems or nonunion. Preliminary results from our experience have been positive. We have performed distal radial osteotomies and IM nail ﬁxation for distal radial malunion in 16 patients and have adequate follow-up data on 11. These 11 patients were operated on at an average of 7.6 months after the time of the original fracture. Bone graft was taken from the iliac crest in six patients, locally from the distal radius callous in four patients, and was an injectable calcium-sulfate paste in one. There were 10 dorsal malunions and one volar malunion. The volar tilt for the dorsal malunions averaged 13.18 (apex volar), while the volar malunion measured C288 (apex dorsal). All 11 of the patients healed their osteotomies at an average time period of 7.8 weeks following surgery. Physical exam, at an average follow-up of 6.1 months, showed wrist ﬂexion of 468, extension of 598, forearm supination of 758, and pronation of 808. Radiographs postprocedure showed a correction of alignment to the following average values: volar tilt of 2.28, radial inclination of 22.68, and a radial length of 0.4 mm ulnar positive. There were no cases of nerve injury or tendon irritation, and grip strength averaged 67% of the contralateral side.

& & &

Outcomes & & & &

Extraarticular distal radial malunions can be addressed safely and adequately through minimally invasive procedures. A new technique of locked IM nail ﬁxation of distal radius malunions has been shown to be effective and to have an acceptable complication rate. With careful preoperative planning, the site of the malunion can be approached through a limited incision, adequately corrected, and stably ﬁxed through a second limited approach with an IM nail.

& Future Direction of the Technique As the technique of IM nail ﬁxation of acute distal radius fractures becomes more mature and widely accepted, the use and indications in ﬁxation for malunions will expand. Improvement in injectable bone substitutes will allow the procedure to become even less invasive. Indications for intra-articular malunions may expand as IM nail ﬁxation devices are improved and are coupled with other methods of ﬁxation.

& SUMMATION POINTS

Indications &

Patients with a functional deﬁcit secondary to malunited distal radius fractures: dorsal or volar malunion.

High union rate. Little to no tendon irritation. Minimal hardware prominence. Early return to functional ROM.

Complications & &

Temporary radial sensory nerve irritation. Nonunion rate similar to conventional techniques.

& REFERENCES 1. 2. 3. 4. 5. 6. 7.

8. 9.

& SUMMARY & General Conclusions

Extraarticular malunions. Limited articular extension. Nascent or established malunions.

10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20.

Fernandez DL, Jupiter J. Fractures of the Distal Radius: A Practical Approach to Management. New York: Springer, 1996. Owen RA, Melton LJ, Johnson KA. Incidence of Colles fracture in a North American community. Am J Public Health 1982; 72(6):605–13. Colles A. On the fracture of the carpal extremity of the radius. Edinburgh Med Surg J 1814; 10:182–6. Cooney WP, III, Dobyns JH, Linscheid RL. Complications of Colles’ fractures. J Bone Joint Surg 1980; 62A:613–9. Fernandez DL. Malunion of the Distal Radius: Current Approach to Management Instructional Course Lectures. Vol. 42. AAUG Publishing, Rosenont, IL 1993:99–113. Ghormley RK, Mroz RJ. Fractures of the wrist: a review of one hundred and seventy six cases. Surg Gynecol Obstet 1932; 55:377–81. Boyer MI, Weiland AJ, Gelberman RH, Gardner MJ, Robison J, Simic PM. Treatment of distal radius fractures with a low-proﬁle dorsal plating system: an outcomes assessment. J Hand Surg 2006; 31(3):382–6. Orbay JL, Fernandez DL. Volar ﬁxationfor dorsally displaced fractures of the distal radius: a preliminary report. J Hand Surg 2002; 27A(2):205–15. Rosental TD, Blazar PE. Functional outcome and complication after volar plating for dorsally displaced, unstable fractures of the distal radius. J Hand Surg 2006; 31(3):359–65. Malone JK, Magnell TD, Freeman DC, Boyer MI, Placzek JF. Surgical correction of dorsally angulated distal radius malunions with ﬁxed angle volar plating: a case series. J Hand Surg 2006; 31(3):366–72. Tan V, Capo JT, Warburton M. Distal radius fracture ﬁxation with an intramedullary nail. Tech Hand Up Extrem Surg 2005; 9(4):195–201. Brooks K, Capo JT, Warburton M, Tan V. Internal ﬁxation of distal radius fractures with novel intramedullary implants. Clin Orthop 2006; 445:42–50. Graham TJ. Surgical correction of malunited fractures of the distal radius. J Am Acad Orthop Surg 1997; 5:270. Adams BD. Effects of radial deformity on distal radioulnar joint mechanics. J Hand Surg 1993; 18(3):492–8. Pogue DJ, Viegas S, Patterson RM, et al. Effects of distal radius fracture malunion on wrist joint mechanics. J Hand Surg 1990; 15(5):721–7. Bronstein AJ, Trumble TE, Tencer AF. The effects of distal radius fracture malalignment on forearm rotation: a cadaveric study. J Hand Surg 1997; 22(2):258–62. Short WH, Palmer AK. A biomechanical study of distal radius fractures. J Hand Surg 1987; 12(4):529–34. Palmer AK, Werner FW. Biomechanics of the distal radioulnar joint. Clin Orthop Relat Res 1984; July–August(187):26–35. Jupiter JB, Ring D. A comparison of early and late reconstruction of malunited fractures of the distal end of the radius. J Bone Joint Surg 1996; 78A(5):739–48. Ring D, Roberge C, Morgan T, Jupiter JB. Osteotomy for malunited fractures of the distal radius: a comparison of structural and nonstructural autogenous bone grafts. J Hand Surg 2002; 27(2): 216–21.

Repair of Distal Radial Malunions with an Intramedullary Nail & 201 21. Fernandez DL, Capo JT, Gonzalez E. Corrective osteotomy for symptomatic increased ulnar tilt of the distal end of the radius. J Hand Surg 2001; 26(4):722–32. 22. Shea K, Fernandez DL, Jupiter JB, Martin C, Jr. Corrective osteotomy for malunited, volarly displaced fractures of the distal end of the radius. J Bone Joint Surg Am 1997; 79(12):1816–26.

23. Fernandez DL. Reconstruction procedures for malunion and traumatic arthritis. Orthop Clin North Am 1993; 24(2):341–63. 24. Fernandez DL. Correction of post-traumatic wrist deformity in adults by osteotomy, bone-grafting, and internal ﬁxation. J Bone Joint Surg 1982; 64(8):1164–78.

25 Repair of Distal Radial Malunion with Volar Plating David A. Fuller

Cooper University Hospital, University of Medicine and Dentistry of New Jersey, Camden, New Jersey, U.S.A.

& INTRODUCTION Osteotomy of a malunited distal radius fracture is indicated for a healed fracture, which has already produced an unfavorable outcome, or one that is likely lead to a poor clinical or radiographic result. Historically, osteotomies of the distal radius have been performed for extra-articular fracture malunions using a dorsal buttress plate and iliac crest bone grafting (1). Dorsal plating has been associated with tendon adhesions (2) and iliac crest bone grafting has donor site morbidity (3). A less invasive osteotomy technique is now possible that offers improvements over the established technique. Advances with the new osteotomy technique are attributable to improved implants, new surgical techniques, and the recent availability of synthetic bone graft substitutes. This chapter will focus on use of a volar surgical approach and volar plate ﬁxation when performing osteotomy for malunion of the distal radius. Both extra- and intra-articular malunion will be considered in this chapter. Newly designed implants now make it possible to treat acute, dorsally displaced distal radius fractures from a volar surgical approach (4). The implants are plates designed with locking screws that prevent settling of the construct. By placing the plate ﬁxation on the volar aspect of the bone, extensor tendon problems can be avoided. These new implants can now be used for extra-articular osteotomies of the distal radius. For intra-articular malunions, fracture fragment-speciﬁc implants are also now available. These focal implants combined with higher resolution and reformatted, three-dimensional computed tomography (CT) scans have recently expanded possibilities for intra-articular osteotomies (5,6). The need for iliac crest bone grafting in many clinical situations, including treatment of distal radius fracture has become unnecessary with the recent rise of bone graft substitutes (7,8). Bone morphogenic proteins and synthetic bone graft substitutes can provide both the osteoinductive and the osteoconductive environment needed to heal challenging bone defects such as osteotomies. While these products do not provide the mechanical support of an iliac crest bone graft, the improved strength of the new, ﬁxed angle implants appears to have obviated the need for a structural graft in osteotomy of the distal radius. Utilizing these various techniques allows for a less invasive treatment of distal radius fracture malunions.

& INDICATIONS The same radiographic parameters established for treatment of acute distal radius fractures must be considered as indications for osteotomy in the symptomatic patient. These recommendations include: radial shortening of greater than 2 mm, dorsal tilt of greater than 108, radial inclination of less than 158, intraarticular step-off of greater than 1 to 2 mm, an incongruent

sigmoid notch, and the presence of carpal malalignment or subluxation (9). These ﬁndings are predictors of a symptomatic malunion (9). Using these radiographic guidelines, the potential beneﬁts of surgery must be weighed against the risks for each individual patient. Patient age, medical comorbidities, lifestyle, and occupation must all be considered. Poor bone quality is a relative contraindication to osteotomy with volar plate ﬁxation. This technique relies on structural support of the volar, ﬁxed angle implant underneath the articular surface while the osteotomy heals. Poor bone quality can lead to settling of the bone around the implant or even cut out of the implant into the articular surface. Using the described technique, there can be difﬁculty gaining substantial length of the distal radius. If joint leveling for an ulnar positive wrist is necessary, a structural bone graft in the radial osteotomy site or shortening of the ulna may be required.

& CONSIDERATION FOR PREOPERATIVE PLANNING Osteotomy for extra-articular malunion is performed more commonly than osteotomy for intra-articular malunion. For an extra-articular malunion of the distal radius, orthogonal radiographs of the involved wrist are typically the only preoperative diagnostic studies necessary. The sagittal and coronal plane deformities can be determined from the radiographs. The rotational deformity in the axial plane, that is pronation or supination of the articular fragment relative to the shaft, is often best determined intraoperatively. A reformatted threedimensional CT scan can be helpful preoperatively in evaluation of rotational malalignment. For an intra-articular malunion, a CT scan is necessary preoperatively. Radiographs of the contralateral, uninvolved wrist may provide a better reference than population data (10) and therefore may also be considered as part of the preoperative evaluation prior to osteotomy. In addition to understanding the bone deformity, the design of the implant must be understood by the surgeon. Many implants are now available which can be used effectively for osteotomy, but the implants can differ in their screw-plate angles and screw-hole positions. The position of the locking screws within the distal, articular fragment will determine the correction achieved with osteotomy. The surgeon, prior to effective implant usage, must know the angular relationship between the locking screws and the plate so that the screws can be inserted in appropriate position into the articular fragment during osteotomy (Fig. 1).

& SURGICAL TECHNIQUE The patient is positioned supine, with a tourniquet around the brachium and ﬂuoroscopy immediately available for

204 & Fuller

& Extra-Articular Osteotomy

FIGURE 1 Schematic drawing of technique of using ﬁxed angle, volar plate to achieve correction of dorsally angulated malunion when performing distal radius osteotomy. After ﬁxation of the plate into the subchondral bone, the osteotomy is completed underneath the plate. By bringing the proximal end of the plate down to the volar surface of the radial shaft, the dorsal opening wedge defect is created. The volar tilt is restored to the joint surface of the distal radius.

intraoperative assessment. A volar incision centered over the ﬂexor carpi radialis (FCR) tendon is made, beginning at the distal wrist ﬂexion crease, and extending approximately 7 cm proximally. The FCR tendon sheath is incised allowing ulnar retraction of the FCR tendon along with the other volar ﬂexor tendons and the median nerve. The pronator quadratus (PQ) is released with electorcautery from its radial attachment on the distal radius and a periosteal elevator is used to elevate the PQ in an ulnar direction. The brachioradialis (BR) tendon insertion is released by incising sharply from proximal to distal along the radial aspect of the distal radius. Releasing the BR tendon improves the mobilization of the distal radius articular fragment. Good visualization of the volar aspect of the distal radius is now possible. Often it is possible to see exactly where the original fracture occurred. In some patients, difﬁculty exists visualizing the ulnar aspect of the volar distal radius with ulnar retraction of the FCR. Slight ﬂexion of the wrist can relax the tendons to allow adequate visualization. If visualization of the ulnar aspect of the volar, distal radius from this approach remains poor, then all of the ﬁnger ﬂexor tendons, the median nerve, and the FCR tendon should be retracted radially to expose the ulnar aspect of the distal radius prior to osteotomy. A penrose drain or rubber vessel loop can be looped around the ﬁnger ﬂexor tendons, the median nerve, and FCR allowing easy ulnar and radial retraction of these structures as needed for the osteotomy.

The most common malunion of the distal radius has excessive dorsal angulation (Fig. 2) and the goal of surgery is to increase the volar tilt. For the osteotomy of the extra-articular malunion, the soft tissues should be mobilized on the dorsal aspect of the distal radius by sweeping a small periosteal elevator around the dorsal aspect of the distal radius from both the ulnar and the radial sides. The tendons of the ﬁrst dorsal compartment are elevated in a subperiosteal fashion while working around the dorsum from the radial side. On the ulnar side, the capsule of the distal radioulnar joint is typically not opened as the osteotomy is just proximal to this joint. Once the dorsal soft tissues have been mobilized, small reverse retractors can be passed at the approximate level of the osteotomy from both the radial and the ulna aspects of the distal radius to protect the dorsal soft tissues. Based upon intraoperative inspection and preoperative determinations, the level of the osteotomy can be marked on the volar distal radius with a surgical marking pen. Routinely, the osteotomy is performed directly through the old fracture site which is in the mid-metaphysis. The volar plate is brought into the surgical ﬁeld now and placed against the volar, distal radius to approximate its position. Adequate bone distal to the osteotomy site should exist to allow for safe insertion of the distal, subchondral screws through the plate, and into the articular fragment. Fluoroscopy should be used at this point to conﬁrm the level of the osteotomy and plate position. The position of the distal, locking screws in the subchondral bone will determine the ﬁnal alignment of the distal articular fragment. The plate should now be removed from the surgical ﬁeld and the osteotomy started along the pen line using ﬁne, sharp osteotomes. Oscillating saws may cause thermal injury and unnecessary loss of bone and are not recommended. The osteotomy should be made incompletely at ﬁrst. The volar aspect of the distal radius and the thick cortical bone along the radial and especially ulnar aspects should be cut. This should leave the dorsal cortex of the distal radius malunion intact. With the dorsal cortex intact, the plate should be brought back into the surgical ﬁeld to begin insertion of the distal, locking screws. The distal, locking screws should be inserted into the subchondral bone distal to the osteotomy site. The proximal end of the plate needs to be held in an elevated position off of the radial shaft while the distal screws are inserted. The number of degrees that the plate is elevated off of the radial shaft equals the amount of sagittal plane correction that will occur at the completion of the surgical case. This amount of correction is determined from the preoperative X-rays and is based on the severity of the malunion. Another measure to conﬁrm the correct position of the plate is to evaluate the angle subtended by the locking screws and the articular surface of the distal radius intraoperatively on the lateral ﬂuoroscopic view of the joint. For a plate with the screws positioned at 908 relative to the plate, placement of the screws parallel to the joint in the subchondral bone will only bring the joint to neutral (08) once the plate is afﬁxed to the radial shaft later in the case. Radial inclination is often decreased in distal radius malunions and the osteotomy should attempt to restore radial inclination as well. Rotation of the proximal end of the plate toward the ulna prior to insertion of the subchondral screws will allow increasing radial inclination after osteotomy as the plate is brought down to the radial shaft.

Repair of Distal Radial Malunion with Volar Plating & 205 (A)

(B)

FIGURE 2 (A,B) Radiographic images of a 35-year-old female with a dorsally angulated malunion of the distal radius. The dorsal tilt measures 288. The original injury was treated one year previously with dorsal bone grafting and pinning. She was painful and weak at presentation one year after the initial injury.

Once the distal screws are in the subchondral bone and are locked into the plate, the proximal end of the plate should be in a position of elevation from the radial shaft. This applies for the more common malunions that heal with dorsal angulation. The osteotome is used once again and working underneath the plate, the dorsal cortex of the distal radius is cut (Fig. 3) thus completing the osteotomy. Once this cut is completed, the distal, articular fragment is mobile relative to the shaft. The correction (Fig. 4) is now achieved by bringing the proximal end of the volar plate down to the volar aspect of the radial shaft. By bringing the plate down, the distal articular piece will ﬂex the predetermined amount. Coronal correction will also be achieved by bringing the plate into alignment with the radial shaft. There is typically some ﬂexibility with coronal correction due to the ﬂat nature of the volar aspect of the radial shaft. Greater correction of radial inclination can be achieved by rotating the proximal end of the plate away from the ulna. As the plate is brought down against the volar shaft, correction of malrotation in the axial plane should occur as well if the distal end of the plate is anatomically contoured to the volar distal radius. The position of the subchondral screws should be observed to make sure that they are not cutting through the bone. The screws should be positioned as distally as possible where the bone is strongest. Once the plate has been brought down ﬂush with the radial shaft, then several bicortical screws should be inserted into the proximal end of the plate to stabilize the construct. This will leave an opening wedge bone defect underneath the plate at the osteotomy site. Working around the radial aspect of the distal radius, this defect is easily accessed. This gap can be ﬁlled with a granular synthetic bone graft substitute such as tricalcium phosphate or hydroxyapatite. Other agents that can stimulate bone healing, such as bone morphogenic proteins, can be considered as well. Once the gap has been ﬁlled, the wound can be closed.

& Intra-Articular Osteotomy For the osteotomy of the less common intra-articular malunion, the volar surgical approach is essentially the same and will be directed at the malunited fragment. From the volar approach, this may be a displaced volar, ulnar corner fragment (Fig. 5), or an unacceptable step-off between the scaphoid and lunate facets. Unlike the osteotomy for the extra-articular malunion, the joint capsule must be opened to visualize the joint surface for an intra-articular malunion. The volar capsule can be opened transversely and should be repaired later. Very ﬁne osteotomes should be used to gently mobilize the malunited fragment. Once the osteotomy has been preformed and the joint surface reduced, a small implant is used in a buttress fashion to hold the bone fragment reduced (Fig. 6). Typically bone graft is not necessary, but if desired, a small amount can be harvested as a core punch from the distal radius or alternatively a synthetic bone graft substitute can be used. The tourniquet should be deﬂated prior to closure to inspect for any bleeding particularly around the radial artery. During closure, the PQ can sometimes be reapproximated over the plate. Skin is typically closed with a 3-0 absorbable suture in the subcutaneous tissue and a 3-0 nonabsorbable suture in the skin. Patients are admitted to the hospital overnight to help manage pain and swelling. A drain is typically left in the wound, which is removed on the ﬁrst postoperative day prior to discharge. Active wrist ﬂexion and extension exercises are encouraged beginning on the ﬁrst postoperative day. The patient is given a removable wrist orthosis to use for the ﬁrst few weeks after surgery for comfort.

& COMPLICATIONS AND THEIR MANAGEMENT Complications of the described, less invasive, extra-articular osteotomy technique are not fully known yet as this is a new technique with few outcomes reported (11). Because the

206 & Fuller

FIGURE 3 Intraoperative view of osteotomy. The plate is ﬁxed to the subchondral bone distally. The osteotomy, which was partially completed prior to attachment of the plate distally, is now being completed underneath the plate. The dorsal cortex is being cut with the osteotome which is positioned in the osteotomy site. The volar, radial, and ulnar cortices of the distal radius were cut prior to attachment of the plate.

alignment after osteotomy depends entirely on the plate and screws rather than a strong piece of cortical bone in the osteotomy site, concern exists for settling of the articular fragment and loss of alignment. It is theoretically possible for the screws to cut through the articular surface particularly in

(A)

osteopenic bone which may be encountered from disuse. The more quickly the osteotomy site can heal, the shorter the dependence on the hardware. For the very small fragments encountered during intra-articular osteotomy, avascular necrosis of the fragment is a risk. Nonunion is also a potential

(B)

FIGURE 4 (A and B) Eight month follow-up radiographs of patient. The volar tilt and radial inclination of 118 and 228, respectively, have been restored. Tricalcium phosphate has been placed into osteotomy site and is incorporating as new bone. No loss of alignment has occurred from immediate postoperative radiographs.

Repair of Distal Radial Malunion with Volar Plating & 207 (A)

(B)

FIGURE 5 (A) Radiographic image of 16-year-old female with a 3-month-old, intra-articular malunion of distal radius fracture. There is deformity of the lunate fossa. The initial injury was treated nonsurgically. She was painful, weak, and had very limited motion particularly in pronation and supination. (B) Computed tomography scan of malunion. Image shown is a sagittal view through the lunate fossa. The articular fragment is displaced volarly with the articular surface rotated 908 and facing dorsally. The fragment has healed to the volar cortex in this position. There is volar subluxation of the lunate. This is a rotational injury in the axial plane, wherein the entire carpus pronates away from the radial shaft.

(A)

(B)

FIGURE 6 (A) Intraoperative lateral ﬂuoroscopic view of volar plate buttressing the articular fragment after osteotomy. The articular fragment was approached through a volar incision and mobilized by using osteotomes to cut through the healed section attaching the fragment to the distal radius. Direct visualization of the joint surface is necessary to guide the osteotomy, reduction, and placement of the plate. (B) One-year follow-up radiograph. Healing occurred without any signs of avascularity of the fragment. Complete and pain free motion and strength were restored for the patient.

208 & Fuller

complication of osteotomy. None of these complications have been observed in this author’s experience. If difﬁculty is encountered intraoperatively with achieving adequate correction, it may be possible to bend the plate in situ to establish more volar tilt to the articular fragment. If the ﬁxation does not appear to be adequate or the bone appears weak, it is possible to reinforce the construct with more support in the bone defect. Bone graft substitutes that will harden in situ do exist that can be inserted and will provide some resistance to compression. Alternatively, a cortical strut of bone can be inserted from this approach, if it is felt that this is necessary. Once the reduction with the plate has been achieved, a wedgeshaped piece of cortical bone can be impacted into the gap underneath the plate from the radial side of the plate.

& OUTCOMES Extra- and intra-articular osteotomy of the distal radius are established techniques, both safe and effective, for treatment of symptomatic malunion of the distal radius (1,5). Only recently has a peer-reviewed series of extra-articular osteotomies done using a technique similar to that described in this chapter been published (11). In this series, outcomes were favorable in the four reported patients. Radiographic parameters and functional scores all improved after osteotomy. One important distinction between this published series and the technique described in this chapter is that the published series included the use of varying types of autologous bone graft. The described technique in this chapter without the use of autologous bone graft has been effective in this author’s experience of ﬁve patients with short-term follow-up. For these ﬁve patients, the osteotomies were clinically healed by three months and all patients were very satisﬁed. All of these extra-articular osteotomies were performed for dorsally angulated, extra-articular malunions. Volar tilt was restored for all these patients to a range of 08 to 108. No nonunions or loss of reduction were observed in this series of ﬁve patients. The advantages of a less invasive procedure have been realized at least in early follow-up in a few small series. Longterm follow-up is necessary to ensure that the ﬁnal functional outcome is at least equivalent to the established technique of dorsal plating with iliac crest bone graft.

follow-up and greater patient numbers are needed to validate this technique.

& SUMMATION POINTS

Indications & & &

Symptomatic malunion. Minimal osteoarthrosis. Adequate bone quality for ﬁxation.

Outcomes & & & &

Restoration of bone anatomy. Good patient satisfaction. Safe and effective. Functional improvement.

Complications & & &

Loss of reduction. Plate failure. Nonunion.

& REFERENCES 1. 2. 3. 4. 5. 6.

& SUMMARY

7.

Realignment of the skeletal system after a healed fracture is inherently a major operation that attempts to alter an undesirable outcome. Outcome studies after distal radius fractures guide our understanding of what is acceptable alignment for a healed fracture and therefore when an osteotomy should be considered. Osteotomy has been shown to improve outcome after a malunited fracture. A less invasive technique for osteotomy of the distal radius is now possible and has been described in this chapter. This technique is possible due to new implants and synthetic bone graft substitutes. Long-term

8. 9. 10. 11.

Fernandez DL. Correction of post-traumatic wrist deformity in adults by osteotomy, bone grafting and internal ﬁxation. J Bone Joint Surg Am 1982; 64:1164–78. Cohen MS, Turner TM, Urban RM. Effects of implant material and plate design on tendon function and morphology. Clin Orthop Relat Res 2006; 445:81–90. Goulet JA, Senunas LE, DeSilva GL, et al. Autogenous iliac crest bone graft. Complications and functional assessment. Clin Orthop Relat Res 1997; 339:76–81. Orbay JL, Fernandez DL. Volar ﬁxation for dorsally displaced fractures of the distal radius: a preliminary report. J Hand Surg Am 2002; 27:205–15. Ring D, Prommersberger KJ, Gonzalez del Pino J, et al. Corrective osteotomy for intra-articular malunion of the distal part of the radius. J Bone Joint Surg Am 2005; 87:1503–9. Athwal GS, Illis RE, Small CF, et al. Computer-assisted distal radius osteotomy. J Hand Surg Am 2003; 28:951–8. Ladd AL, Pliam NB. Use of bone-graft substitutes in distal radius fractures. J Am Acad Orthop Surg 1999; 7:279–90. Wolfe SW, Pike L, Slade JF, III, et al. Augmentation of distal radius fracture ﬁxation with coralline hydroxyapatitie bone graft substitute. J Hand Surg Am 1999; 24:816–27. Fernandez DL. Should anatomic reduction be pursued in distal radius fractures? J Hand Surg Br 2000; 25:523–7. Hollevoet N, Van Maele G, Van Seymortier P, et al. Comparison of palmar tilt, radial inclination and ulnar variance in left and right wrists. J Hand Surg Br 2000; 25:431–3. Malone KJ, Magnell TD, Freeman DC, et al. Surgical correction of dorsally angulated distal radius malunions with ﬁxed angle volar plating: a case series. J Hand Surg Am 2006; 31:366–72.

Part VI(A): Wrist and Hand Arthroscopy – Traumatic

26 Surgical Setup and Intra-articular Anatomy David J. Bozentka

Department of Orthopedic Surgery, University of Pennsylvania Medical Center, Philadelphia, Pennsylvania, U.S.A.

& INTRODUCTION Wrist arthroscopy has become a common diagnostic and therapeutic tool following improvements in instrumentation and description of the various wrist portals in 1985 (1). As the beneﬁts of wrist arthroscopy became evident, the arthroscopic assessment of other small joints such as the metacarpophalangeal (MP) joints and carpometacarpal (CMC) joints developed. Surgical small joint arthroscopy of the upper extremity has continued to evolve. Due to magniﬁcation of the intra-articular structures and the small size of the arthroscopic instruments, arthroscopy improves access to small joints and our visualization as compared to open exposures. Arthroscopy provides an invaluable opportunity to evaluate the extent and signiﬁcance of joint disorders allowing the surgeon to palpate cartilage surfaces and ligaments. In addition to the diagnostic capabilities, arthroscopy provides multiple therapeutic options. Many open procedures can now be performed more efﬁciently through smaller incisions with limited surgical dissection, less postoperative pain and earlier return of function.

& INDICATIONS Common arthroscopic procedures for the small joints of the upper extremity involve debridement with loose body removal, synovectomy including lavage for a septic joint, arthroscopic assisted fracture treatment, as well as the assessment and management of chondral lesions. Procedures speciﬁc for the wrist include repair or debridement of triangular ﬁbrocartilage complex (TFCC) injuries, wrist ganglion excision. Bone excisions can be performed such as a radial styloidectomy, carpal bone excision including proximal row carpectomy (PRC) or partial distal ulna excision (i.e., wafer procedure). Wrist arthroscopy is helpful in the treatment of interosseous ligament injuries including the use of thermal shrinkage, as well as treatment of scaphoid and distal radius fractures (2). Fracture treatment at the CMC and MP joints are also aided by arthroscopy due to the difﬁculties related to the shape and limited space of these joints. Repair of ulnar collateral ligament (UCL) injuries of the thumb MP joint can be assisted with arthroscopy as well as, arthroplasty of the thumb CMC joint with or without ligament reconstruction (3–5). Despite the advantages of upper extremity small joint arthroscopy, there are several situations in which the arthroscopic procedure is contraindicated. Certain disorders are best treated by open techniques. Although TFCC injuries are treated arthroscopically, procedures such as ligament reconstruction for distal radial joint instability are best performed by an open technique. Arthroscopic treatment of scaphoid fractures is

considered for the fracture without a collapse deformity. Scaphoid fractures with a humpback deformity should be treated with an open reduction and wedge bone graft to reconstruct the normal scaphoid alignment. Limitations are also related to the timing of the procedure. For example, arthroscopic treatment of distal radius fractures is ideally performed at three to seven days after the injury. There tends to be less intra-operative bleeding, two to three days following the injury. In addition, fracture healing that occurs after this time period makes manipulation of the fragments more difﬁcult (6).

& PREOPERATIVE PLANNING The diagnosis of an upper extremity disorder is usually evident following a thorough preoperative history, physical examination, and appropriate X-rays. Further imaging using high resolution MRI will aid in the diagnosis of avascular necrosis, arthritic changes small non-palpable ganglion cysts and documentation of interosseous ligament and TFCC injuries (7,8). Documentation of the location and severity of symptoms is essential since asymptomatic disorders found during the preoperative work up and at the time of arthroscopy may not require treatment (9).

& SURGICAL TECHNIQUE & Operative Setup Arthroscopy of the wrist and hand is performed under regional block or general anesthesia. The patient is supine on the operating table and the involved upper extremity is placed on an attached hand table (Fig. 1). The video tower is positioned on the opposite side of the operating table. The tower includes the video monitor, light source, shaver, and thermal probe power source as well as a video and image documentation system. A small ﬂuoroscopy unit, if required, is placed at the head of the bed and the scrub nurse is at the end of the hand table for assistance. A non-sterile pneumatic tourniquet is applied to the upper arm padded with webril. In the past, an overhead traction apparatus with the elbow held at 908 was used for joint distraction. The overhead boom tended to be bulky and limited the options for wrist positioning. Now commercially available self-contained traction towers are most often used. These devices allow variable distraction with the forearm suspended in a vertical position and easy access to the joint, which may be placed in various positions. Alternatively, wrist arthroscopy can be performed with the extremity in a horizontal position and traction applied by a weight attached through a pulley over the end of an adapted

210 & Bozentka

interosseous ligament thermal shrinkage. TFCC repair kit should be available for treatment of peripheral TFCC injuries.

& Operative Technique

Wrist Joints

The major neurovascular structures traversing the wrist are located palmarly; Therefore, the majority of portals for arthroscopic assessment and instrumentation are situated on the dorsal aspect of the wrist. A systematic evaluation of the articular surfaces and ligaments is performed initially at the RCJ (Fig. 2). The portals for the RCJ are named according to their location with respect to the extensor compartments (Fig. 3). The 3/4 portal lies between the third and fourth extensor compartments. This is the workhorse portal and is situated just distal to Lister’s tubercle. The 4/5 portal, located between the fourth and ﬁfth extensor compartments lies just distal to the DRUJ. The 6R portal is located just radial to the extensor carpi ulnaris tendon. The 6U portal, which lies ulnar to the extensor carpi ulnaris tendon, is used less often due to the higher risk of injury to the adjacent dorsal ulnar sensory nerve branch. Another seldom-used portal is the 1/2 portal, which provides a radial view of the RCJ similar to that of the 3/4 portal. It is located radial to the extensor carpi radialis longus tendon and ulnar to the extensor carpi radialis brevis tendon just distal to the radial styloid. Care must be taken on making this portal due to the proximity of the dorsal radial sensory nerve and deep branch of the radial artery. The arthroscope is initially placed through the 3/4 portal. The fat pad, which lies in front of the radioscapholunate (RSL) ligament, is visualized. This fat pad is a consistent landmark for the arthroscopist. The articular surface of the radius including the scaphoid and lunate facets is examined for chondral FIGURE 1 Photograph of intraoperative wrist arthroscopy setup.

Tm

hand table. During arthroscopic assisted ﬁxation of distal radius fractures, distraction may be applied through a traction tower or an external ﬁxator. An external ﬁxator that allows incremental adjustment of distraction and multi-planar alignment is helpful. Nylon ﬁnger traps are placed on the digits for distraction. Metallic ﬁnger traps are not used, particularly in the elderly patient, to prevent skin damage or digital neuropraxia adjacent to bony prominences. Ten to 15 lbs of traction is applied through the joint. A gravity assisted ﬂow irrigation system is adequate with the height of the bag of ﬂuid correlating to the amount of joint distension. In-ﬂow pressure may also be maintained by an assistant with a syringe or pinch pump on the infusion line. Pressure sensing irrigation systems allow a constant ﬂow of ﬂuid for a consistent pressure for joint distension. Care must be taken with any of these devices to limit ﬂuid extravasation particularly during the treatment of wrist fractures. The radiocarpal joint (RCJ) is evaluated using a 2 to 3 mm diameter arthroscope angled 258 to 308. To assess the CMC or MP joints, a 1.5 to 2 mm arthroscope is utilized. These smaller arthroscopes may also be useful for the assessment of the midcarpal and distal radioulnar joints (DRUJ). Additional useful instrumentation includes appropriately sized probe, assorted graspers, suction punch, and shaver with a full radius resector and bur. Small joint electro thermal micro ablation probes are useful in TFCC debridement while thermal probes are also available for chondroplasty and

Td C

H

SC

MCJ

TH TC

ST

T

S

RCJ

L

SL

LT RSC

LRL

RSL

SRL

UL

TFC UT DRUJ

R U FIGURE 2 Diagram of the wrist from a dorsal perspective demonstrating the regions of the major joints (shaded regions) and arthroscopically visible ligaments. Joint spaces: DRUJ, distal radioulnar joint; MCJ, mid-carpal joint; RCJ, radiocarpal joint. Bones: C, capitate; H, hamate; L, lunate; R, radius; S, scaphoid; T, triquetrum; Td, trapezoid; Tm, trapezium; U, ulna. Ligaments: LRL, long radiolunate; RSC, radioscaphocapitate; RSL, radioscapholunate; SC, scaphocapitate; ST, scaphotrapezium; TC, triquetrocapitate; TFC, triangular ﬁbrocartilage; TH, triquetrohamate; UL, lnolunate; UT, ulnotriquetral. Source: From Ref. 10.

Surgical Setup and Intra-articular Anatomy & 211

(B)

(A)

L STT TH

6U Radial 6R midcarpal

1-2 3-4

4-5

PSR

Ulnar midcarpal

FIGURE 3 (A) The standard radiocarpal portals and (B) the standard midcarpal portals. Abbreviations: STT, scapho-trapezio-trapezoid; TH, triquetrohamate. Source: From Ref. 2.

changes. The articular surfaces of the proximal pole of the scaphoid and lunate carpal bones are visualized and the scapholunate ligament is probed through the 4/5 portal. Attention is directed to the radial gutter looking for loose bodies. The extrinsic ligaments, which extend from outside the carpus and attach to the carpal bones, are then evaluated. The radioscaphocapitate (RSC) ligament is the radial most extrinsic ligament of the wrist (Fig. 4). This ligament extends from the distal radius to the capitate coalescing with the ulnocapitate ligament distally to form the arcuate complex. This complex acts as a support for the head of the capitate. The adjacent ligament ulnarly is the long radiolunate ligament. This ligament is very broad measuring two to three times the width of the RSC ligament. Visualization more ulnarly in the region of the fat pad, the RSL ligament is encountered. It was previously termed the ligament of Testut and arises at the ridge between the scaphoid and lunate facets. The RSL ligament once believed to be very important for wrist stability has more recently been found to be of limited mechanical importance carrying neurovascular structures (11). The short radiolunate ligament extends from the lunate facet to the lunate. This ligament is often noted to be intact following a perilunate dislocation holding the lunate to the volar rim of the radius.

S

RSC LRL

FIGURE 4 Arthroscopic view of the radioscaphocapitate ligament, long radiolunate ligament, and scaphoid from the 3/4 portal. Abbreviations: LRL, long radiolunate ligament; RSC, radioscaphocapitate ligament; S, scaphoid.

TFC

FIGURE 5 Arthroscopic view of the triangular ﬁbrocartilage complex, prestyloid recess, and lunate from the 3/4 portal. Abbreviations: L, lunate; PSR, prestyloid recess; TFCC, triangular ﬁbrocartilage complex. Source: Courtesy of Mayo.

The ulnar extrinsic ligaments and TFCC lay ulnar to the lunate facet (Fig. 5). The ulnar extrinsic ligaments course from the triangular ﬁbro-complex proximally to the carpus distally. The ulnolunate ligament is the most radial of these ligaments and is contiguous with the short radiolunate ligament. The adjacent ulnotriquetral (UT) ligament forms the ulnar wall of the RCJ. In 70% of normal adults the pisotriquetral joint can be visualized through an opening in the ligament with the scope in the 4/5 or 6R portals. A constant oriﬁce in the UT ligament is the prestyloid recess typically noted to have abundant synovial tissue. The ulnocapitate ligament lies between the ulnolunate and UT ligaments and forms the ulnar aspect of the arcuate complex as it coalesces with the RSC ligament distally (12). The TFCC is composed of the articular disc, meniscus homologue, volar and dorsal distal radial ulnar ligaments, the ulnar extrinsic ligaments and deep component of the extensor carpi ulnaris tendon sheath. The complex provides support for the ulnar carpus and stabilizes the DRUJ. The integrity of the TFCC is evaluated by performing a trampoline test. A normal TFCC should have adequate tension while balloting the disc with a probe. Laxity on performing the maneuver is consistent with a peripheral tear. The scapholunate interosseous ligament (SLIL) is found distal to the fat pad at the interfacet ridge of the radius. It is best visualized through the 3/4 portal and palpated with a probe through the 4/5 or 6R portals. The ligament is probed to evaluate the thick volar and dorsal components as well as the thin less clinically signiﬁcant central or intramembranous component. The dorsal component of the SL ligament is well visualized with the arthroscope through a more ulnar radiocarpal portal while the probe is placed through the 3/4 portal. The volar aspect of the SLIL can be directly assessed through the volar radial portal. To make this portal, an incision is made just proximal to the volar wrist crease to expose the ﬂexor carpi radialis tendon (FCR). The FCR tendon is retracted and the portal position is veriﬁed with a 19-gauge needle just radial to the FCR sheath at the RCJ line. The lunotriquetral (LT) interosseous ligament is not well visualized through the 3/4 portal and requires the arthroscope to be placed in the 4/5 or 6R

212 & Bozentka

T

L Td UT

Tm

S FIGURE 6 Arthroscopic view of the lunotriquetral interval from the 3/4 portal. The lunate, triquetrum, and ulnotriquetral ligament can be visualized. Abbreviations: L, lunate; T, triquetrum; UT, ulnotriquetral ligament.

FIGURE 8 Arthroscopic view of the scaphoid, trapezium, and trapezoid at the scaphotrapezialtrapezoidal interval viewing from the radial midcarpal portal. Abbreviations: S, scaphoid; Td, trapezoid; Tm, trapezium.

portal. The intact ligament appears as a smooth convex surface between the lunate and triquetrum (Fig. 6). The midcarpal joint is initially evaluated through the radial midcarpal portal. This portal is made 1 cm distal to the 3/4 portal in line with the third metacarpal. The location for the portal can be palpated as a depression between the scaphoid and capitate. The ulnar midcarpal portal, located 1 cm distal to the 4/5 portal is used initially for outﬂow. The scapholunate and LT intervals at the midcarpal joints are devoid of ligament. The intervals are evaluated for step-off or widening, which if present is consistent with ligamentous injury (Fig. 7). The scapho-trapezio-trapezoid (STT) interval is visualized by directing the scope distally between the scaphoid and capitate (Fig. 8). The articular surfaces are evaluated and typically an area devoid of articular cartilage is noted on the dorsal aspect of the trapezium. Visualization taken ulnarly in the midcarpal joint allows for an evaluation of the four-corner region.

IML DRL DIML

POL APL

dAOL

C SAOL DT-II MC T DRL

POL L

FIGURE 7 Arthroscopic view of the lunotriquetral interval from the radial midcarpal portal. Note the extra facet of the lunate adjacent to the triquetrum. The head of the capitate can be seen distally. Abbreviations: C, capitate; L, lunate; T, triquetrum.

DTT

FIGURE 9 Diagram of the trapeziometacarpal joint hinged open from the dorsum to reveal the deep anterior oblique ligament (beak ligament) lying just ulnar to the volar tubercle of the metacarpal. Abbreviations: APL, abductor pollicis longus tendon; dAOL, deep anterior oblique ligament; DIML, dorsal intermetacarpal; DRL, dorsoradial; DT-II MC, dorsal trapezio-II metacarpal; DTT, dorsal trapeziotrapezoid; IML, intermetacarpal; POL, posterior oblique; SAOL, superﬁcial anterior oblique. Source: From Ref. 14.

Surgical Setup and Intra-articular Anatomy & 213

(A)

UCL AOLd

POL

AOLs

DRL

APL

(B)

EPB

(C)

MI

AOLs

AOLd

Tm

The proximal pole of the hamate should be evaluated for osteochondral changes as a cause for ulnar sided wrist pain. A volar midcarpal portal can be made for visualization of the proximal pole of the hamate and capitate. The portal is placed 1 cm distal to the volar radiocarpal portal. Two other less commonly used midcarpal portals include the scaphotrapezial and triquetral-hamate portals. The scaphotrapezial portal is used for visualization of the STT joint and the triquetralhamate portal may be used for outﬂow (2). The DRUJ may be visualized through a portal proximal to the head of the ulna and another portal distally. The forearm is placed in a supinated position to relax the joint capsule. The arthroscope is placed in the proximal portal to examine the radioulnar articular surfaces. The distal portal is located just distal to the ulnar head and is used for examination of the undersurface of the TFCC and the distal articular surface of the ulna (13).

Thumb CMC Joint

Sixteen ligaments stabilize the thumb CMC joint, and ﬁve can be visualized arthroscopically. The superﬁcial anterior oblique ligament (SAOL) originates from the volar tubercle of the trapezium and insert along the volar ulnar tubercle of the thumb metacarpal (Fig. 9). This ligament lies deep to the thenar musculature and superﬁcial to the deep anterior oblique ligament (dAOL). The SAOL is visualized arthroscopically along the entire anterior aspect of the joint. The dAOL, or beak ligament, inserts on the articular margin of the trapezium and thumb metacarpal deep to the SAOL. It is visualized at the

FIGURE 10 Arthroscopic view of the anterior margin of the TM joint. (A) The TM joint from a distal perspective showing the arthroscope in the 1U portal and its viewing area (non-shaded). Note the position of the probe in the 1R portal. (B) View taken through an arthroscope in the 1U portal. The tip of the probe is in the radial recess between the superﬁcial anterior oblique ligament and deep anterior oblique ligament. (C) Structures visible in part B. Abbreviations: AOLd, deep anterior oblique ligament; AOLs, superﬁcial anterior oblique ligament; APL, abductor pollicis longus tendon; DRL, dorsoradial ligament; EPB, extensor pollicis brevis tendon; MI, ﬁrst metacarpal; POL, posterior oblique ligament; TM, trapeziometacarpal; Tm, trapezium; UCL, ulnar collateral ligament. Source: From Ref. 15.

anterior aspect of the joint centrally (Fig. 10). The dorsoradial ligament (DRL) is the widest and thickest ligament of the trapeziometacarpal joint. It arises from the dorsoradial aspect of the trapezium inserting on the dorsal aspect of the thumb metacarpal. This ligament is seen covering a large portion of the posterior margin of the joint merging with the posterior oblique ligament (POL). The POL originates on the dorso-ulnar aspect of the trapezium and inserts on the dorso-ulnar aspect of the thumb metacarpal. On arthroscopic visualization, it is contiguous with the DRL. The UCL originates from the distal margin of the transverse carpal ligament and inserts on the palmar tubercle of the thumb metacarpal. There is often a subtle demarcation between it and the SAOL which lies more ulnarly (15). Several portals have been described for the evaluation of the CMC joint (Fig. 11). The 1R portal is located radial to the abductor pollicis longus tendon. The 1U portal is located ulnar to the extensor pollicis brevis (EPB) tendon. The 1U portal is used to visualize the anterior oblique ligaments and UCL. The 1R portal is helpful in visualizing the DRL, POL, and UCL (16). Orellana et al. (17) described a more radial portal made just anterior to the FCR tendon distal to the oblique ridge of the trapezium. The portal lies just radial to the SAOL and allows visualization of the dorsal radial ligament and POL. This thenar portal, as further described by Walsh et al. (18), is located in the thenar eminence 908 to the 1U portal (Fig. 11). This portal has been found to be located at a greater distance from the dorsal radial sensory nerve branch than the 1R portal and provide greater visualization of the CMC since it is

214 & Bozentka

MC

1U T

1R

Thenar portal

S

FIGURE 11 Arthroscopic portals for the thumb carpometacarpal joint; Small arrows represents the course of abductor pollicis longus tendon and extensor pollicis brevis tendon. Abbreviations: MC, metacarpal; S, scaphoid; T, trapezium. Source: Courtesy of Virak Tan, MD.

perpendicular to the 1U portal. The thenar portal is recommended for instrumentation since there is a greater soft-tissue envelope with greater comfort in manipulation of instruments and a larger margin of error.

The thumb MP joint has more limited range of motion and greater stability of the collateral ligaments than the ﬁnger MP joints. The extensor mechanism of the thumb MP joint includes the EPB tendon centrally that inserts on the base of the proximal phalanx and the extensor pollicis longus that inserts on the base of the distal phalanx. The adductor aponeurosis makes up the ulnar saggital band component of the thumb extensor mechanism. The digital neurovascular bundles lie volar to the MP joint adjacent to the ﬂexor tendons and sheath. The dorsal ulnar and radial sensory nerve branches provide sensory innervation to the dorsal aspect of the MP joints and need to be protected during any surgical procedure. Arthroscopy of the MP joint is performed with a similar setup as wrist arthroscopy. The patient is supine on the operating table with the arm placed in a traction tower for distraction. For arthroscopy of the index, middle, ring or small ﬁnger, nylon ﬁnger traps are applied to the involved and adjacent digit(s). For thumb MP arthroscopy, a ﬁnger trap is placed only on the thumb. The ﬁnger traps are applied distally so that they do not interfere with portal placement. Removing any remaining soap scrub from the digits may help the traction of the ﬁnger traps. If distraction continues to be limited, a transverse Kirschner (K) wire can be placed in the mid-axial plane in the proximal or middle phalanx (distal to the joint to be evaluated) for traction. Approximately, 8 to 12 lbs of distraction is applied to the digit. The standard portals include the dorsal radial and dorsal ulnar on either side of the extensor communis tendon of the ﬁnger and EPL of the thumb. A mini ﬂuoroscopy unit may be required to localize the position of the joint. A 19-gauge needle is placed in one of the portals for insufﬂation of the joint. The joint is insufﬂated with saline or lactated Ringer’s solution prior to portal placement. Epinephrine is not used in the solution due to the concern for extravasation and the risk of digital ischemia. The MP joint has a volume of approximately 2 mL. An assistant continuously injecting ﬂuid within the joint may help keep the joint distended (19). A 1.9 mm to 2.3 mm arthroscope is placed within one of the portals. The adjacent portal is developed for instrumentation including the shaver. The cartilage surfaces are identiﬁed and the shaver is used for synovectomy. The entire metacarpal head and base of proximal phalanx can be visualized. The radial and UCLs are identiﬁed. A complete synovectomy can include the volar and dorsal capsular surfaces as well as the radial and ulnar recesses.

MP Joints

The MP joints are diarthrodial condylar type joints with an asymmetric metacarpal head. The metacarpal head is wider in the anterior to posterior plane than in the coronal plane providing increased joint stability in ﬂexion than extension. The volar plate limits hyperextension. The membranous portion has some laxity and attaches to the metacarpal neck while the cartilaginous component attaching to the proximal phalanx. The accessory collateral ligaments extend from the volar aspect of the collateral ligaments to the volar plate. The true collateral ligaments lie dorsal to the central axis of the MP joint and become taut with the joint held in ﬂexion due to the cam effect related to the asymmetry of the metacarpal head. The extensor mechanism of the ﬁnger MP joint is made up of the central tendon, radial and ulnar saggital bands, medial and lateral slips of the interosseous and insertion of the lumbricle tendon. The MP joint is extended through the saggital bands since there is little connection of the extensor mechanism to the dorsal base of the proximal phalanx. The saggital bands also hold the central extensor tendon reduced over the dorsal aspect of the MP joint.

& COMPLICATIONS Small joint arthroscopy is a safe procedure with a low risk of complication, especially when compared to open procedures. The incidence of complications during wrist arthroscopy has been reported to be 5.2% with the majority of these complications minor (20). There is a relationship of the complication with the complexity of the procedure. The more complex the procedure, the greater the risk of a complication (21). Small joint arthroscopy complications include nerve injury to the dorsal ulnar and radial sensory branches. In addition, injury to the posterior interosseous nerve and reﬂex sympathetic dystrophy has been reported. Tendon related complications include extensor carpi ulnaris tendonitis, partial injury to extensor digitorum communis of the small ﬁnger and a tendon rupture from a K-wire. Complications associated with positioning in the traction tower have included a burn from the base plate and an ulnar nerve injury. Wrist stiffness, inclusion cyst and ganglion cyst development following arthroscopy can occur. Strict adherence to surgical technique, with protection of sensory nerve

Surgical Setup and Intra-articular Anatomy & 215

branches and tendons at the time of portal placement and instrumentation will limit the occurrence of these complications.

& SUMMARY As arthroscopic equipments and surgical techniques improved, surgeons have applied them to the smaller joints of the upper extremity. The advantages of arthroscopy versus open surgery of the wrist, thumb CMC, and MP joints are similar to those of larger joints. These include: (i) less surgical exposure, (ii) excellent joint visualization, (iii) early postoperative joint mobilization, and (iv) shorter rehabilitation period. Small joint arthroscopy is minimally invasive and effective when used for the appropriate indications: & & & &

& &

& & &

Joint debridement: Loose body, synovectomy partial or complete, lavage for sepsis Carpal instability: Interosseous ligament debridement, thermal shrinkage, SL or LT percutaneous pinning Ligament repair: Thumb MP UCL Bone excision: Carpal bone excision including proximal pole scaphoid, PRC, lunate for Kienbock’s, radial styloidectomy, wafer TFCC treatment: Debridement or repair Fracture treatment: Distal radius, scaphoid, MP joint— metacarpal head or base proximal phalanx, thumb CMC— metacarpal base or trapezium Management arthritis: Debridement chondral lesions, arthroplasty thumb CMC Dorsal wrist ganglion excision Capsular release wrist

There are relatively few complications from arthroscopy of the wrist and hand and when they do occur, are generally minor. Precise portal placement is important due to the close proximity of the extensor tendons and dorsal sensory nerves.

4. 5.

6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19.

& REFERENCES 1. Roth J, Poehling GG, Whipple TL. Hand instrumentation for small joint arthroscopy. Arthroscopy 1988; 4:126–8. 2. Gupta R, Bozentka DJ, Osterman AL. Wrist arthroscopy: principles and clinical applications. J Am Acad Orthop Surg 2001; 9(3):200–9. 3. Slade J, Gutow A. Arthroscopy of the metacarpophalangeal joint. Hand Clin 1999; 15(3):501–27.

20. 21.

Menon J. Arthroscopic management of trapeziometacarpal joint arthritis of the thumb. Arthroscopy 1996; 12(5):581–7. Badia A, Riano F. Bilateral arthroscopic tendon interposition arthroplasty of the thumb carpometacarpal joint in a patient with Ehlers-Danlos syndrome: a case report. J Hand Surg [Am] 2005; 30:673–6. Geissler WB, Freeland AE. Arthroscopic management of intraarticular distal radius fractures. Hand Clin 1999; 15(3):455–65. Zlatkin MB, Chao PC, Osterman AL, Schnall MD, Dalinka MK, Kressel HY. Chronic wrist pain: evaluation with high-resolution MR imaging. Radiology 1989; 173(3):723–9. Vo P, Wright T, Hayden F, Dell P, Chidgey L. Evaluating dorsal wrist pain: MRI diagnosis of occult dorsal wrist ganglion. J Hand Surg [Am] 1995; 20(4):667–70. Cantor RM, Stern PJ, Wyrick JD, Michaels SE. The relevance of ligament tears or perforations in the diagnosis of wrist pain: an arthrographic study. J Hand Surg [Am] 1994; 19(6):945–53. Berger RA. Arthroscopic anatomy of the wirst and distal radiaoulnar joint. Hand Clin 1999; 15:393–413. Berger RA, Kauer JM, Landsmeer JM. Radioscapholunate ligament: a gross anatomic and histologic study of fetal and adult wrists. J Hand Surg [Am] 1991; 16(2):350–5. Berger RA. Ligament anatomy. In: Cooney WP, Linscheid RL, Dobyns JH, eds. The Wrist: Diagnosis and Operative Treatment. Mosby: Philadelphia, 1998:73–105. Fulcher S, Poehling GG. The role of operative arthroscopy for the diagnosis and treatment of lesions about the distal ulna. Hand Clin 1998; 14:285–96. Bettinger P, Linsheid R, Berger R, Cooney W, An K. An anatomic study of the stabilizing ligaments of the trapezium and trapeziometacarpal joint. J Hand Surg 1999; 24A:786–98. Bettinger PC, Berger RA. Functional ligamentous anatomy of the trapezium and trapeziometacarpal joint (gross and arthroscopic). Hand Clin 2001; 17(2):151–68. Berger RA. Technique for arthroscopic evaluation of the ﬁrst carpometacaral joint. J Hand Surg [Am] 1997; 22:1077–80. Orellana MA, Chow JC. Arthroscopic visualization of the thumb carpometacarpal joint: introduction and evaluation of a new radial portal. Arthroscopy 2003; 19(6):583–91. Walsh EF, Akelman E, Fleming BC, DaSilva MF. Thumb carpometacarpal arthroscopy: a topographic, anatomic study of the thenar portal. J Hand Surg [Am] 2005; 30:373–9. Sekiya I, Kobayashi M, Taneda Y, Matsui N. Arthroscopy of the proximal interphalangeal and metacarpophalangeal joints in rheumatoid hands. Arthroscopy 2002; 18(3):292–7. Beredjiklian PK, Bozentka DJ, Leung YL, Monagham BA. Complications of wrist arthroscopy. J Hand Surg [Am] 2004; 29(3): 406–11. Small N. Complications in arthroscopy: the knee and other joints. Committee on complications of the arthroscopy association of North America. Arthroscopy 1986; 2(4):253–8.

27 Arthroscopic Treatment of Interosseous Ligament Tears, Carpal Instability, and Capsular Electrothermal Shrinkage Techniques Gregory K. Deirmengian and Pedro K. Beredjiklian

Department of Orthopedic Surgery, Hospital of the University of Pennsylvania, Presbyterian Medical Center, Philadelphia, Pennsylvania, U.S.A.

& INTRODUCTION

& INDICATIONS

The development of wrist arthroscopy in the mid 1980s was a major advance in the diagnosis and management of wrist disorders, and its application indications continue to expand with technologic improvements. Prior to the advent of wrist arthroscopy, the diagnosis and treatment of disorders of the wrist was limited to radiographic studies or arthrotomy. Arthroscopy allows for the direct visualization of articular surfaces of the carpal bones as well as the evaluation of their relative positions. The operative modality also allows for the direct inspection of both extrinsic and intrinsic ligaments of the wrist and the triangular ﬁbrocartilage complex (TFCC). This results in the identiﬁcation of articular pathology that might remain unrecognized with standard imaging studies. Since the use of arthroscopic assessment of the wrist joint has gained a prominent role as a diagnostic tool, it has become clear that magnetic resonance imaging (MRI) and wrist arthrography are less sensitive and speciﬁc than arthroscopy in detecting pathologic changes in the radiocarpal and midcarpal joints (1–3). As a result of this increased sensitivity, the procedure allows for the adjudication of diagnoses that had previously been generically classiﬁed as “wrist sprain” (4). For example, prior to the advent of wrist arthroscopy, patients with either attenuation or partial tears or attenuation of the scapholunate interosseus ligament (SLIL) or lunotriquetral interosseus ligament (LTIL) not visualized on MRI or arthrography were given the diagnosis of “wrist sprain.” Wrist arthroscopy allows for the identiﬁcation of these pathologic changes and treatment in the form of debridement and/or electrothermal collagen shrinkage (ECS) (5). In addition to yielding signiﬁcant improvements as a diagnostic tool, arthroscopy has yielded signiﬁcant improvements in the treatment of wrist disorders. In the past, operative treatment options by deﬁnition involved open, invasive procedures which invariably involved arthrotomy. The introduction of wrist arthroscopy has expanded the standard algorithm for the management of wrist pathology, especially in patients with wrist pain and/or instability. Advantages of the arthroscopic management of ligamentous disorders of the wrist include decreased surgical dissection, less postoperative pain and time to recovery, and earlier return to work (6). Additionally, because in most cases such arthroscopic treatment does not preclude treatment with arthrotomy, more invasive options remain available in cases of failure of attempted arthroscopic treatment.

For disorders of the wrist secondary to ligamentous injuries, there are several speciﬁc diagnostic and therapeutic indications for arthroscopy, which as mentioned previously continue to expand as the technology evolves. In considering the technique for patients with wrist pain likely due to ligamentous or capsular injuries, two important factors determined on history, physical examination, and imaging studies include: (i) timing of the patient’s injury; and (ii) the presence or absence of clinical carpal instability. Patients who present with mechanical wrist pain in the absence of clinical or radiographic signs of instability should be initially managed with at least a three month course of conservative management, including activity modiﬁcation, splinting, anti-inﬂammatory medication, and occupational therapy. Diagnostic wrist arthroscopy is indicated in patients presenting with a history of mechanical pain that have failed conservative measures in which physical examination and radiographic studies have failed to demonstrate a speciﬁc pathologic articular process (5). Arthroscopy as a diagnostic modality is also indicated in patients who have a history and physical examination consistent with carpal instability, but in whom radiographic modalities fail to demonstrate any speciﬁc structural disruption. As mentioned previously, wrist arthroscopy is the most sensitive available means of detecting carpal instability (1,2). MRI, while a very useful diagnostic tool in evaluating disorders of the musculoskeletal system, is less than ideal when evaluating disorders of the wrist joint. For example, one study has shown that the sensitivity and speciﬁcity of MRI in the detection of central disk TFCC tears is in no better than 73% and 91% respectively. The same study revealed that the sensitivity and speciﬁcity of MRI in the detection of complete tears of the scapholunate ligament is no better than 69% and 75% respectively. While it has been suggested that MRI in combination with arthrography may improve the diagnostic accuracy of this modality, there is insufﬁcient data in the literature to justify the routine use of magnetic resonance arthrography for the diagnosis of wrist pathology. For these reasons and as a result of the inadequacies of radiographic imaging, wrist arthroscopy is considered and remains the gold standard in the diagnosis of wrist joint disorders (7). While the diagnostic superiority of arthroscopy is well established, this modality has led to an improvement in the understanding of wrist joint pathology, particularly as it relates to the SLIL. Traditionally, injury to the SLIL has been considered

218 & Deirmengian and Beredjiklian

as an all-or-none phenomenon, with either an intact structure or complete rupture of the ligament from its bony insertions. Recent experience with arthroscopic assessment of SLIL pathology suggests that injury to the ligament likely occurs in a continuum ranging from an intact ligament, followed by ligament attenuation and partial tears, to complete ligament rupture. Incomplete SLIL injuries can result from trauma generating sufﬁcient tensile forces across the carpal articulation to tear the central membranous portion, but only straining or “stretching” the stouter dorsal portion. It is believed that the instability created by these partial disruptions can lead to persistent symptoms despite conservative care (8,9). Geissler et al. have introduced an arthroscopic classiﬁcation of SLIL injuries which is a four grade system based on the appearance of the intercarpal ligament and the level of step-off, incongruence, or instability of the intercarpal space. Type I injuries include those with ligament attenuation without step-off; type II injuries are comprised of those injuries displaying attenuation of the SLIL, as well as a step-off, and/or incongruity of the intercarpal space as seen from the midcarpal joint; type III injuries reveal scapholunate interval step-off seen from the radiocarpal and midcarpal joints; and type IV injuries demonstrate gapping at the scapholunate interval allowing the 2.7 mm arthroscope to be passed between the scaphoid and lunate from the midcarpal to the radiocarpal joint (the so-called “drive-thru” test, which is consistent with complete rupture of the SLIL) (10). The recognition of this spectrum of injuries has lead to new treatment modalities as outlined later in the chapter. In addition to its preeminent role in the diagnosis of wrist disorders, wrist arthroscopy plays an important role in the treatment of patients with structural disruption of the joint. Arthroscopy as a treatment modality is a less invasive alternative to open repair or reconstruction. Indications for surgical wrist arthroscopy in patients with wrist joint instability include acute, subacute, and chronic intercarpal ligament (SLIL, LTIL) injuries, and those with peripheral tears of the TFCC. The arthroscopic treatment of intercarpal ligament injuries is guided by the degree of ligamentous injuries. While the following discussion is based primarily on pathology of the SLIL, treatment of LTIL could potentially be addressed with the same algorithmic approach. In patients with partial or incomplete tears of the intercarpal ligaments (Geissler types I–III) debridement of the partial tear using an arthroscopic shaver or a cautery probe has been used with good clinical success (11). More recently, several authors have described their experience with ECS for injuries involving the attenuation of the intercarpal ligaments. ECS technology involves the application of low temperature radiofrequency energy to soft tissue structures. Application of the probe to soft tissue leads to an increase of the temperature of the tissue to approximately 658C. This increase in the temperature of the tissues initially leads to the ultrastructural alteration and denaturing of the collagen ﬁbril. This destruction of intermolecular bond within collagen causes a transition from an organized to random state, leading to shortening of the molecules and shrinkage of the attenuated soft tissue at a gross level (12). Attenuation of capsular or ligamentous structures of the wrist can contribute to pain and/or instability and correction of this laxity through thermal shrinkage can resolve the patient’s symptoms. Basic science data behind the use of thermal energy to treat capsular, ligamentous, and cartilaginous tissue laxity is extensive (13). The role of thermal stabilization in the treatment of soft tissue laxity in orthopedic surgery continues to be deﬁned. While the clinical use of ECS in the knee and shoulder is well documented in the literature (9),

FIGURE 1 Arthroscopic image of electrothermal probe on an attenuated scapholunate interosseus ligament. The visualization portal is the 3–4 portal, while the probe is inserted in the 4–5 portal. Source: Courtesy P.K. Beredjiklian.

only a handful of clinical studies are available regarding outcomes of the use of ECS in the wrist (Fig. 1) (14). Other indications for surgical arthroscopy of the wrist include injuries in patients who present with complete, acute ligamentous injuries. Some authors have advocated arthroscopic treatment of SLIL injuries via arthroscopic reduction of the scapholunate interval followed by percutaneous pinning of the scapholunate joint with Kirschner (K) wires (15). The resulting formation of stabilizing ﬁbrotic tissue between the ﬁxed carpal bones during the period of immobilization leads to stabilization. Most surgeons, however, will perform an open repair of the SLIL via arthrotomy using suture anchors following the arthroscopic assessment of the joint. For patients presenting with chronic dynamic or static carpal instability, wrist arthroscopy is reserved as an alternative to more extensive open procedures, such as capsulodeses or arthrodeses. Patients who present in this manner can be offered an arthroscopic debridement, synovectomy, and/or radial styloidectomy (depending on the clinical ﬁndings) in an attempt to relieve pain and avoid or delay a more deﬁnitive open salvage procedure (16).

& CONSIDERATIONS FOR PREOPERATIVE PLANNING The key element of preoperative planning for the use of arthroscopy in the diagnosis and management of ligamentous disorders of the wrist is thorough clinical workup. On history, it is important to determine patient’s handedness and occupation, obtain details of any traumatic injury, and to elicit a detailed characterization of the location, quality, and timing of the pain as well as associated mechanical and neurological symptoms. History of bony injuries, and prior injury and surgery to the affected upper extremity are also important.

Arthroscopic Treatment of Inter-Carpal Ligament Tears of the Wrist Joint & 219

On physical examination, it is critical to localize the patient’s pain and to determine the contribution of instability to the patient’s symptoms. On inspection, areas of deformity and swelling should be noted. Active and passive range of motion should be recorded and compared with the opposite wrist. The patient’s wrist should be systematically palpated in order to localize areas of tenderness. This should include palpation of the scapholunate interval, just distal to Lister’s tubercle, as well as the lunotriquetral interval. Provocative maneuvers to elicit carpal instability are helpful in determining the presence of structural disruption of the stabilizing ligaments of the carpus. The scaphoid shift test as described by Watson is used to assess for the presence of scapholunate instability due to SLIL disruption. The test is performed by placing the examiner’s thumb on the distal pole of the scaphoid on the volar aspect of the palm with the wrist ulnarly deviated. Pressure is placed on the distal pole as the patient’s wrist is radially deviated. In cases of SLIL disruption or instability, the scaphoid subluxates dorsally out of the scaphoid fossa of the distal radius. When pressure is released from the scaphoid, a clunk can be felt and heard as the scaphoid returns to the fossa (16). Provocative maneuvers for LTIL instability include the lunotriquetral ballottment test, the shuck test, and the shear test. The lunotriquetral ballottment test is performed by stabilizing the lunate with the thumb and index ﬁngers of one hand, while the other hand attempts to displace the pisotriquetral unit volarly. In the shuck test, the lunate is stabilized with the same technique used in the ballottement test. The wrist is then taken through both active and passive radial and ulnar deviation. The provocative maneuver is positive if it generates pain or clicking at the lunotriquetral joint. The shear test is used to detect the presence of lunotriquetral strain, and is performed by applying a shear force at this joint while stabilizing lunate dorsally and pisotriquetral plane volarly, generating pain in the lunotriquetral interval. To test for midcarpal instability, the forearm is stabilized in a pronated position. With the wrist in ulnar deviation, the examiner’s thumb exerts volar pressure at the level of the distal capitate. The wrist is then simultaneously axially loaded at the metacarpals and radially deviated. The result is positive if a painful clunk occurs that reproduces the patient’s symptoms (16). All patients presenting with wrist pain and/or instability should be evaluated with plain ﬁlms of the wrist. This should include static posteroanterior (PA), lateral, oblique and scaphoid views of the wrist, as well as a dynamic clenched ﬁst supinated PA view. Static views are useful in detecting fractures and dislocations. In addition, degenerative changes arising from chronic instability can be readily assessed radiographically. Static radiographic signs of SLIL disruption include of the scapholunate interval greater than 4 mm (scapholunate diastasis, Terry Thomas sign), foreshortened scaphoid, and the signet ring sign reﬂecting the distal pole of the scaphoid as it falls into ﬂexion (Fig. 2). Dynamic instability can often be revealed by the clenched ﬁst view with widening of the scapholunate distance. Most acute LTIL injuries will be negative on the PA view. On the lateral view, ligamentous insufﬁciency can be detected by measuring the scapholunate angle, which in normals should measure between 308 and 708. In patients with SLIL injuries, ﬂexion of the scaphoid and extension of the lunate and triquetrum leads to an increase in the scapholunate angle (more than 708), ﬁnding which is termed dorsal intercalated segment instability (Fig. 3). In patients with LTIL injuries, ﬂexion of the scaphoid and lunate and extension of the triquetrum leads to a decrease in the scapholunate angle (less than 308), ﬁnding which is termed volar intercalated segment

FIGURE 2 Posteroanterior X-ray of a wrist with static instability due to scapholunate interosseus ligament disruption. The arrows point to the scapholunate diastasis, the asterisk within the ring reﬂects the signet ring sign, and the bracket shows the shortening of the scaphoid length. Source: Courtesy P.K. Beredjiklian.

instability deformities. In addition, degenerative changes arising from chronic instability can be readily assessed radiographically. It should be noted that in many cases of acute carpal instability, initial plain X-rays may be negative, as some of the radiographic signs may take several days or weeks to be present. In addition, comparison views of an unaffected contralateral wrist may be helpful in identifying patients with normally increased scapholunate distances. When clinically warranted and in equivocal cases, MRI with or without arthrography can be used diagnostically in patients with potential ligamentous injuries and negative plain radiographs. Arthrography of the wrist alone can show discontinuity of intrinsic ligaments, but does not quantify the degree of disruption and does not evaluate the status of the extrinsic ligaments. Furthermore, arthrography is signiﬁcantly less sensitive than arthroscopy in the diagnosis of ligamentous injuries of the wrist (2). MRI can show ligamentous tears as well as signal changes or abnormal ﬂuid communication representative of partial tears (Fig. 4). MRI has replaced arthrography as the advanced imaging study of choice, but an adequate study requires resources such as a strong magnet with speciﬁc extremity coils and a dedicated musculoskeletal radiologist. While MRI is a useful diagnostic studies in many clinical situations, they should be interpreted with caution and do not substitute for arthroscopy as the diagnostic modality of choice.

220 & Deirmengian and Beredjiklian

& SURGICAL TECHNIQUE A detailed description of the principles of arthroscopy equipment, surgical setup, portal placement, and relevant intraarticular anatomy can be found in chapter 28. As with the use of arthroscopy in other joints, both diagnostic and therapeutic wrist arthroscopy starts with a systematic evaluation of all visible structures as well as the static and dynamic interactions of intra-articular bony and soft tissue structures. Following the identiﬁcation and grading of the relevant pathology, a treatment plan is determined and executed. After prepping and draping the patient in the usual manner and setting up the wrist traction tower to improve visualization, the wrist joint is insufﬂated with 10 mL of normal saline (Fig. 5). The 3–4 radiocarpal portal is established as the visualization portal and the 4–5 radiocarpal portals is established as the working portal. The 6U portal is commonly used for outﬂow and the 6R portal is often used as an accessory portal for visualization, instrumentation, or outﬂow. The midcarpal portal is established for further access, and is especially valuable in assessing intracarpal step-off or incongruity in patients with suspected intercarpal ligament tears. After establishment of portals, the intra-articular soft tissue and bony anatomy is systematically evaluated with the patient’s clinical presentation in mind. This includes evaluation

FIGURE 3 Lateral X-ray of a wrist with static instability due to scapholunate interosseus ligament disruption. The lines outline the scapholunate angle, which in this case it is increased to about 808, displaying a dorsal intercalated segmental instability pattern. Source: Courtesy P.K. Beredjiklian.

FIGURE 4 Magnetic resonance image of a patient with an acute scapholunate interosseus ligament disruption. The arrow points to the site of injury, which reveals signal changes, edema of the proximal end of the scaphoid, and the ruptured ligament. Source: Courtesy P.K. Beredjiklian.

FIGURE 5 Intraoperative photograph of a standard arthroscopic set up. The wrist is distracted with a commercially available distraction tower. Source: Courtesy P.K. Beredjiklian.

Arthroscopic Treatment of Inter-Carpal Ligament Tears of the Wrist Joint & 221

of the TFCC, wrist capsule, synovium, intrinsic and extrinsic ligaments, articular surfaces, and dynamic interactions of the carpal bones. Following visualization and stress testing of intrinsic ligaments of concern with a probe and determining whether the probe can be passed through intercarpal intervals, the degrees of ligamentous attenuation or disruption are noted, as well as associated articular step-off or incongruities. Ligamentous injuries can then be graded by the method of Giessler to aid in therapeutic decision-making as described previously. Associated pathology that may be contributing to the patient’s symptoms, including TFCC tears and synovitis, can be addressed arthroscopically at the same time of surgery through debridement and/or repair. Therapeutic modalities are used in order to treat the structural pathology in an attempt to alleviate the patient’s mechanical symptoms. In general, partial ligamentous tears are debrided with arthroscopic cautery, shavers, and biters down to bleeding bone. It is important to debride the tissue to a stable rim while avoiding areas of healthy ligament. Once each tear is adequately debrided, the stability of the tissue and its surrounding structures is evaluated with a probe. Postoperatively, patients treated only with ligamentous debridement are placed in a splint followed by a cast for four to six weeks after suture removal and physical therapy is then initiated. Injuries amenable to ECS include attenuated or redundant intrinsic and extrinsic ligaments (Geissler types I–III). A monopolar thermal probe is inserted into the 4–5 portal (with the arthroscope in the 3–4 portal) and thermal stabilization of the scapholunate interosseous ligament is carried out until the redundant ligamentous tissue is made taut. The probe is applied to the all arthroscopically accessible portions of the SLIL, beginning in the most volar aspect of the ligament, moving proximally to the intermembranous portion, and extending to the entire dorsal section of the ligament. The entire procedure is performed under continuous irrigation with a high temperature limit of the probe set at 758C to prevent heat injury to the tissues about the joint. Once midcarpal visualization conﬁrmed congruency of the scapholunate interval without gapping, thermal stabilization is discontinued. Arthroscopic assessment of scapholunate instability is repeated after thermal treatment from the midcarpal and radiocarpal portals. Patients are immobilized postoperatively for four to six weeks in a thumb spica splint. After discontinuing immobilization, a standard hand therapy protocol was initiated, beginning with range of motion exercises and advancing to strengthening at 8 to 10 weeks postoperatively. Complete disruption of both the intrinsic ligament as well as the dorsal capsular attachment leads to dynamic carpal instability. The arthroscopic treatment option in this situation is debridement and intracarpal pinning, and serves as an alternative to more invasive open procedures. The arthroscope is placed in the midcarpal portal to best visualize the reduction. Dorsally directed pressure is placed on the scaphoid tubercle and the reduction of the scapholunate joint is directly visualized. A probe can be used for ﬁne tuning of the reduction. Two 0.045in. K-wires are percutaneously placed across the scapholunate joint and a third wire can be placed across the scaphocapitate joint to improve stability. The reduction and position of the hardware is veriﬁed with direct visualization and with ﬂuoroscopy. As stated previously, most surgeons will perform an open repair of complete SLIL disruption using suture anchors to reattach the torn ligament from its bony insertion or origin following the arthroscopic assessment of the joint. For chronic or static instability, arthroscopy can help to better deﬁne the injuries for appropriate planning of the deﬁnitive open treatment. Therapeutically, the technique is reserved as a less invasive alternative to open procedures

through arthroscopic debridement, synovectomy, and radial styloidectomy in an attempt to achieve temporary relief of symptoms. The 4–5 portal is used for the synovectomy with a shaver. In chronic wrist injuries, the radial styloid often reactively becomes elongated. Impingement associated with this abnormality can contribute to patient’s symptoms. A burr is placed in the 1–2 portal and the radial styloid is removed up to the origin of the radioscaphocapitate ligament.

& COMPLICATIONS Complications associated with the arthroscopic treatment of ligamentous disorders of the wrist are estimated as 2% to 5%, with an incidence of major complications occurring in less than 1% of cases (17). In general, arthroscopic procedures of the wrist have a much lower rate of morbidity than alternative open procedures (17). The complications associated with wrist arthroscopy include transient or permanent stiffness, infection, neuropraxia, complex regional pain syndrome, ganglion cyst occurrence and the portal site, tendon irritation, tendon rupture over a K-wire, and injury to the posterior interosseus nerve (5). There is minimal data regarding complications speciﬁc to thermal capsular shrinkage. As with all new technologies, there are concerns associated with use of electothermal probes during arthroscopy. Potential complications including soft tissue heat injuries, damage to periarticular neurovascular structures, and the effects on patients with pacemakers or any other implantable electrical devices should be carefully considered and possibly avoided. In order to minimize thermal damage, the probes are designed to keep a controlled temperature under the range that causes ablation. Clinical data are required to better deﬁne the risks and potential complications associated with thermal capsular ablation. Treatment of complications associated with arthroscopy is generally successful, as most resolve with conservative management. Transient stiffness can be managed with therapy, most neuropraxias resolve with time, and superﬁcial infections resolve with oral antibiotics (17). Awareness of the potential complications associated with wrist arthroscopy allows for their prevention.

& OUTCOMES Since the development of wrist arthroscopy is relatively recent, reports on outcomes of diagnosis and treatment with this technique are scant. Several authors have reported successful outcomes with arthroscopic debridement of ligamentous tears of the wrist. Ruch et al. evaluated two year minimum outcomes for arthroscopic debridement and early motion in 14 patients with partial scapholunate and lunotriqeutral ligament tears. They found all but one of the patients were highly satisﬁed with the results of the procedure, 11 of the patients had complete resolution of symptoms, and 11 of the patients returned to work within seven weeks of surgery (11). Weiss et al. similarly evaluated the outcomes of arthroscopic debridement of intercarpal ligament tears (18). Fortythree clinically stable wrists with either partial or complete SLIL or LTIL tears were treated with arthroscopic debridement. Results, with an average follow-up of 27 months, showed that 11 out of 13 (85%) patients with partial SLIL tears and six out of six (100%) patients with partial LTIL tears had their symptoms improved or resolved and did not require subsequential procedures. Additionally, 10 out of 15 (67%) patients with complete SLIL tears and seven out of nine (78%) patients with complete LTIL tears had their symptoms improved or resolved and did not require subsequential procedures (18).

222 & Deirmengian and Beredjiklian

Westkaemper et al. also reported the results of the arthroscopic debridement of 23 patients with SLIL tears and ﬁve patients with LTIL tears by an average 15 month follow-up (19). They found good to excellent results in 20 of 23 patients with SLIL tears, but found that four of the ﬁve patients with LTIL tears showed poor results, based on the Mayo Modiﬁed Wrist Score. They compared their results of debriding LTIL tears to those of Osterman et al. who showed an 80% success rate in 20 patients with stable SLIL tears treated with arthroscopic reduction and percutaneous pinning (20). Westkaemper et al. concluded that debridement alone is insufﬁcient for the arthroscopic treatment of LTIL tears (19). The results of the treatment of partial tears or attenuation of wrist ligaments with arthroscopic ECS alone or in combination with debridement are few, but promising. In a report of 10 patients with Geissler type 2 SLIL injuries treated with electrothermal shrinkage, Hirsh et al. showed that at an average of 28 months follow-up, nine of the patients were asymptomatic and had returned to their baseline functional level (14). Similarly, Darlis et al. reported 14 of 16 patients with partial SLIL tears treated with arthroscopic debridement and thermal shrinkage had good to excellent results (Mayo Modiﬁed Wrist Score) at an average of 19 months follow-up (21). While early case series show excellent potential for the use of ECS for disorders of the wrist, clearly more data is needed before drawing conclusions on its clinical uses. Few studies have reported outcomes of a series of patients with carpal instability treated with arthroscopic reduction and percutaneous pinning. Whipple et al. reported results of this technique in 40 patients with acute scapholunate instability (22). They found that 33 of the 40 patients (83%) had symptomatic relief after treatment. Success of the treatment of scapholunate instability in this manner depends on using the technique on only patients with acute injuries with a scapholunate gap of less than 3 mm.

& SUMMARY Wrist arthroscopy is a valuable diagnostic and therapeutic tool in managing patients with wrist pain and instability caused by ligamentous injuries. The technology allows for the minimally invasive direct inspection of all intra-articular structures and therapeutic intervention through the use of small shavers and electrothermal probes. Wrist arthroscopy remains the gold standard in the assessment of articular wrist pathology. Although there is only limited available data regarding patient outcomes resulting from these techniques, the literature that is available show promising results. Further study is needed to explore the efﬁcacy of the techniques and to compare these results with those of more invasive means of treating wrist pain caused by ligamentous injuries.

Complications & & & & & & &

& REFERENCES 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16.

& SUMMATION POINTS

Indications & & &

Mechanical wrist pain that has failed conservative measures History and physical examination consistent with carpal instability Acute SLIL or LTIL injuries

Outcomes & & &

85% to 100% symptom improvement for partial SLIL and LTIL injuries 67% to 78% symptom improvement for complete SLIL and LTIL tears Scant outcome data on arthroscopic ECS

Estimated at 2 to 5%, with major complications less than 1% Transient or permanent stiffness Infection Neuropraxia Complex regional pain syndrome Tendon irritation Posterior interosseus nerve injury

17. 18. 19. 20. 21. 22.

Coonie WP. Evaluation of chronic wrist pain by arthrography, arthroscopy, and arthrotomy. J Hand Surg [Am] 1993; 18(5): 815–22. Weiss AP, Akelman E, Lambiase R. Comparison of the ﬁndings of triple-injection cinearthrography of the wrist with those of arthroscopy. J Bone Joint Surg Am 1996; 78(3):348–56. Chung KC, Zimmerman TB, Travis MT. Wrist arthrography versus arthroscopy: a comparative study of 150 cases. J Hand Surg [Am] 1996; 21(4):591–4. Kozin SH. The role of arthroscopy in scapholunate instability. Hand Clin 1999; 15(3):435–44. Gupta R, Bozentka DJ, Osterman AL. Wrist arthroscopy: principles and clinical applications. J Am Acad Orthop Surg 2001; 9(3):200–9. Poehling GG, Rush DS. Wrist arthroscopy: anatomy and diagnosis. In: Green DP, Hotchkiss RN, Pederson WC, eds. Green’s Operative Hand Surgery. New York: Churchill Livingstone, 1999:192–9. Haims AH, Schweitzer ME, Morrison WB, et al. Internal derangement of the wrist: indirect MR arthrography versus unenhanced MR imaging. Radiology 2003; 227(3):701–7. Berger RA, Garcia-Elias M. General anatomy of the wrist. In: An K-N, Berger RA, Cooney WP, III, eds. Biomechanics of the Wrist Joint. New York: Springer, 1991; 1–22. Fitzgerald BT, Watson BT, Lapoint JM. The use of thermal capsulorraphy in the treatment of multidirectional instability. J Shoulder Elbow Surg 2002; 11:108–13. Geissler WB, Freeland AE, Savoie FH, et al. Intracarpal soft-tissue lesions associated with intra-articular fracture of the distal end of the radius. J Bone Joint Surg Am 1996; 78(3):357–65. Ruch DS, Poehling GG. Arthroscopic management of partial scapholunate and lunotriquetral injuries of the wrist. J Hand Surg [Am] 1996; 21(3):412–7. DeWal H, Ahn A, Raskin KB. Thermal energy in arthroscopic surgery of the wrist. Clin Sports Med 2002; 21(4):727–35. Arnoczky SP, Alptekin A. Thermal modiﬁcation of connective tissues: basic science considerations and clinical implications. J Am Acad Orthop Surg 2000; 5:305–13. Hirsh L, Sodha S, Bozentka D, et al. Arthroscopic electrothermal collagen shrinkage for symptomatic laxity of the scapholunate interosseous ligament. J Hand Surg [Br] 2005; 30(6):643–7. Savoie FH, III, Grondel JR. Arthroscopy for carpal instability. Orthop Clin North Am 1995; 26(4):731–8. Blazer PE. Dislocation/instability. In: Beredjiklian PK, Bozentka D, eds. Review of Hand Surgery. Philadelphia, PA: Saunders, 2004:142–4. Berediklian PK, Bozentka DB, Leung YL, et al. Complications of wrist arthroscopy. J Hand Surg [Am] 2004; 29(3):406–11. Weiss AP, Sacher K, Glowacki KA. Arthroscopic debridement alone for intercarpal ligament tears. J Hand Surg [Am] 1997; 22(2):344–9. Westkaemper JG, Mitsionis G, Giannakopoulos PN. Wrist arthroscopy for the treatment of ligament and triangular ﬁbrocartilage complex injuries. Arthroscopy 1998; 14(5):479–83. Osterman AL, Seidman GD. The role of arthroscopy in the treatment of lunotriquetral ligament injuries. Hand Clin 1995; 11:41–50. Darlis NA, Weiser RW, Sotereanos DG. Partial scapholunate ligament injuries treated with arthroscopic debridement and thermal shrinkage. J Hand Surg [Am] 2005; 30(5):908–14. Whipple TL. The role of arthroscopy in the treatment of scapholunate instability. Hand Clin 1995; 11(1):37–40.

28 Percutaneous and Arthroscopic-Assisted Reduction of Intraarticular Distal Radius Fractures William B. Geissler

Department of Orthopedic Surgery and Rehabilitation, University of Mississippi Medical Center, Jackson, Mississipi, U.S.A.

& INTRODUCTION Displaced intra-articular fractures of the distal radius are a unique subset of radius fractures. These fractures are usually the result of high-energy injury and are associated with intraarticular soft tissue injuries. These fractures are traditionally unstable and are less amenable to casting and closed manipulation. The prognosis for intra-articular fractures of the distal radius has been shown to depend on numerous factors. These factors include the amount of radial shortening, residual extraarticular angulation, articular congruency of both the radiocarpal and distal radioulnar joints (DRUJ), and associated intra-articular soft tissue injuries (1,2). The use of wrist arthroscopy is a valuable adjunct in the management of displaced intra-articular distal radius fractures. Wrist arthroscopy allows viewing of the articular reduction under bright light and magniﬁed conditions with minimal surgical morbidity. Fracture hematoma and debris may be arthroscopically lavaged which potentially can improve the patient’s ﬁnal range of motion. In addition, associated intra-articular soft tissue injuries may be detected and managed in an acute setting. Pathology not readily identiﬁable on plain radiographs may be discovered during arthroscopic-assisted reduction and internal ﬁxation of distal radius fractures. In these incidences, it is much easier to manage an acute soft tissue injury that occurs with a distal radius fracture than chronic pathology. The purpose of this chapter is to review the rationale and technique in the application of wrist arthroscopy in the management of displaced intra-articular fractures of the distal radius. The prognosis for intra-articular fractures of the distal radius has been shown to depend on articular congruity of the joint surface. Two millimeters of articular displacement has become a well-established critical threshold for articular incongruity of the distal radius over the past several years (3,4). Knirk and Jupiter, in their classic article, demonstrated the importance of an articular reduction of 2 mm or less (4). Patients whose articular reduction was greater than 2 mm at ﬁnal follow up, had a signiﬁcantly higher incidence of degenerative changes. Bradway and Amadio further substantiated these ﬁndings in their reported study (3). Fernandez and Geissler in their series of 40 patients noted that the critical threshold may be as low as 1 mm or less (5). They reported that the incidence of complications was substantially lower when the articular reduction was within 1 mm. Trumble et al., in his review of 52 intra-articular fractures noted that factors that strongly correlated with successful outcomes include the amount of residual radial shortening and articular congruity (2). Edwards et al. described the advantage of the intra-articular reduction by wrist arthroscopy

as compared to monitoring under ﬂuoroscopy alone (6). In his report, 15 patients underwent arthroscopic evaluation of the articular surface following reduction and stabilization under ﬂuoroscopy. They found that 33% of the patients had articular step-off of 1 mm or more as viewed arthroscopically. Frequently, the fragment was rotated. It was concluded that utilizing wrist arthroscopy as an adjunct may detect residual gapping not previously identiﬁed under ﬂuoroscopy alone. Wrist arthroscopy is particularly useful in judging the rotation of fracture fragments, which is not readily identiﬁable under ﬂuoroscopy. A high incidence of associated intra-articular soft tissue lesions involving the triangular ﬁbrocartilage complex and the interosseous ligaments has been shown by several authors (7–12). Mohanti and Fontes in two separate wrist arthrogram studies, noted a high incidence of tears of the triangular ﬁbrocartilage complex associated with distal radius fractures (7,11). Fontes found a 66% incidence of tears of the triangular ﬁbrocartilage complex in 58 patients (7). Similarly, Mohanti reported triangular ﬁbrocartilage complex tears in 45% of 60 patients in his series (11). Recently, several arthroscopic studies have documented the incidence of associated intercarpal soft tissue injuries with fractures of the distal radius. In three recent published studies, an injury to the triangular ﬁbrocartilage complex seems to be the most common associated intra-articular soft tissue injury (8,10,13). Geissler et al. reported his experience in 60 patients with displaced intra-articular fractures of the distal radius undergoing arthroscopic-assisted reduction. In Geissler ’s series, 49% of the patients had a tear of the triangular ﬁbrocartilage complex (13). An injury to the interosseous ligaments was less common. Injuries to the scapholunate interosseous ligament were present in 32% of his patients and a tear of the lunotriquetral interosseous ligament was identiﬁed in 15% of patients. Lindau in a similar arthroscopic study of 50 patients noted that tears of the triangular ﬁbrocartilage complex was quite common and present in 78% of the patients (8). Injuries to the scapholunate interosseous ligament was identiﬁed in 54% of cases, and tears of the lunotriquetral interosseous ligament were less frequent and seen in 16% of patients. Hanker found that tears of the triangular ﬁbrocartilage complex were very common and present in 55% of the 65 patients in his series (10).

& RELEVANT ANATOMY AND CLASSIFICATION Geissler et al. described an arthroscopic classiﬁcation of tears of the interosseous ligament based on his work on arthroscopic management of distal radius fractures (13). He noted that a spectrum of injury occurs to the interosseous ligament.

224 & Geissler TABLE 1 Geissler Arthroscopic Classiﬁcation of Carpal Instability Grade I II III IV

Description

Management

Attenuation/hemorrhage of interosseous ligament as seen from the radiocarpal joint. No incongruency of carpal alignment in the midcarpal space Attenuation/hemorrhage of interosseous ligament as seen from the radiocarpal joint. Incongruency/step-off as seen from midcarpal space. A slight gap (less than the width of a probe) between the carpal bones may be present Incongruency/step-off of carpal alignment is seen in both the radiocarpal and midcarpal spaces. The probe may be passed through gap between the carpal bones Incongruency/step-off of carpal alignment is seen in both the radiocarpal and midcarpal spaces. Gross instability with manipulation is noted. A 2.7 mm arthroscope may be passed through the gap between the carpal bones

The ligament attenuates then eventually tears and the degree of rotation between the carpal bones increases. The scapholunate interosseous ligament appears to tear from volar to dorsal. Eventually the ligament completely tears, and a gap between the carpal bones is noted. This arthroscopic classiﬁcation of carpal instability is based on observation of the interosseous ligaments both from the radiocarpal and midcarpal spaces (Table 1). The normal scapholunate and lunotriquetral interosseous ligaments have a concave appearance between the carpal bones as viewed from the radiocarpal space. The scapholunate interosseous ligament is best seen with the arthroscope in the 3 to 4 portal. The lunotriquetral interosseous ligament is best observed with the arthroscope placed in either the 4 to 5 or 6-R portal. In the midcarpal space, the scapholunate ligament should be tight and congruent without any articular step-off. Similarly, the lunotriquetral interval should be congruent, but normally a 1-mm step-off or slight increased (play) between the lunate and triquetrum may be seen. A probe or needle may be inserted through the ulnar midcarpal portal to evaluate the amount of play between the carpal bones. In Geissler Grade I injuries, there is loss of the normal concave appearance between the carpal bones as the interosseous ligament attenuates and becomes convex when seen in the radial carpal space. Hemorrhage may be seen within the ligament in acute situations, particularly associated with a fracture of the distal radius. In the midcarpal space, however, the interval between the carpal bones is still tight, congruent and no step-off is seen. In Geissler Grade II injuries, the interosseous ligament continues to become attenuated and becomes convex as seen in the radial carpal space similar to Grade I injuries. There is no gap between the carpal bones when observed in the radial carpal space. In the midcarpal space, the interval between the involved carpal bones is no longer congruent and a step-off is seen. With scapholunate instability, there is slight palmar ﬂexion of the dorsal edge of the scaphoid as compared to the lunate. In lunotriquetral instability, the interosseous ligament becomes attenuated as seen from the radiocarpal space. In the radial midcarpal space, there would be increased play when the triquetrum is palpated with a probe. Again, no gap is seen between the carpal bones with the arthroscope in the radiocarpal space. In Geissler Grade III injuries, the interosseous ligament starts to tear and separate between the carpal bones. The ligament tears from volar to dorsal. A probe is frequently helpful to demonstrate a gap between the carpal bones. In the midcarpal space, a 2-mm probe may be placed between the carpal bones and twisted. However, the dorsal portion of

Immobilization Arthroscopic reduction and pinning Arthroscopic/open reduction and pinning Open reduction and repair

the interosseous ligament is still intact, and a complete separation of the carpal bones is not seen. In Geissler Grade IV injuries, the interosseous ligament is completely detached and the carpal bones separated. The arthroscope may be freely passed from the radiocarpal space through the tear to the midcarpal space. This is the so-called “drivethrough” sign. Geissler Grade I injuries are consistent with a wrist sprain and usually respond to immobilization over a period of several weeks. In Geissler Grade II and III tears, these may be arthroscopically reduced and pinned in an acute situation. Following reduction of the distal radius fracture, the carpal bones are reduced and provisionally pinned. Usually three to four pins are placed between the involved carpal bones. In Geissler Grade IV injuries where there is a complete detachment of the interosseous ligament, it is felt that open repair will have the best prognosis in an acute situation (Figs 1–3).

& OPERATING ROOM SETUP Small joint arthroscopic instrumentation is essential for arthroscopic-assisted reduction of distal radius fractures. A small joint arthroscope is approximately 2.7 mm in diameter and even smaller arthroscopes may be utilized. When the arthroscope is initially placed in the wrist, it is usually full of hematoma and fracture debris. It is helpful to irrigate out the fracture debris and utilize a shaver (3.5 mm or less) to clear the remaining hematoma to improve visualization. A separate inﬂow is very

FIGURE 1 Posteroanterior radiograph showing an impacted scaphoid facet fracture of the distal radius with scapholunate instability.

Reduction of Intraarticular Distal Radius Fractures & 225

FIGURE 2 Arthroscopic evaluation of the wrist showing a Geissler Grade IV complete tear of the scapholunate interosseous ligament.

helpful to wash out the fracture debris. Inﬂow is placed through the 6-U portal and the hematoma is washed out with a cannula in the traditional 3 to 4 portal. Inﬂow through the arthroscope alone is usually not sufﬁcient due to the small size of the cannulas, which restrict ﬂow. A traction tower is very useful in arthroscopic-assisted management of intra-articular distal radius fractures. A traction tower allows the surgeon to ﬂex, extend, radially and ulnarly deviate the wrist to help reduce the fracture fragments while maintaining constant traction. A new traction tower from ARC Surgical (Hillsboro, Oregon, U.S.A) has been designed to allow the surgeon to simultaneously evaluate arthroscopically the articular reduction and monitor the reduction under ﬂuoroscopy. The traction bar is placed at the side of the wrist rather

FIGURE 3 Posteroanterior radiograph following arthroscopic reduction and elevation of the impacted scaphoid facet fracture. In Geissler Grade IV injuries, it is recommended that a small incision is made for direct primary repair of a complete tear in the scapholunate interosseous ligament.

FIGURE 4 The ARC (Hillsboro, Oregon, U.S.A.) traction tower. The wrist may be suspended in the vertical position, and the traction bar at the side allows for ﬂuoroscopic evaluation of the wrist as it is still in traction.

than at its center so it does not block ﬂuoroscopic evaluation and the surgeon does not need to work around a central bar. In addition, another advantage of having the traction bar at the side rather than centrally is that this allows the surgeon to simultaneously arthroscope the wrist dorsally and stabilizes

FIGURE 5 The ARC (Hillsboro, Oregon, U.S.A.) traction tower may be ﬂexed so the wrist may be suspended in the horizontal position for wrist arthroscopy.

226 & Geissler

the fracture through a volar approach (Fig. 4). The surgeon can ﬂuoroscopically evaluate the position of the plate and screw insertion during stabilization. This new traction tower also allows the surgeon to perform arthroscopic-assisted ﬁxation in either the vertical or horizontal planes depending on the surgeon’s preference (Fig. 5). If the traction tower is not available, the wrist may be suspended by ﬁnger traps attached to a weight over the end of a hand table in the horizontal position, or with a shoulder holder in the vertical position. A small bump is useful to place under the wrist if weights are being utilized at the end of the table to obtain the wrist in slight palmar ﬂexion. Patients who sustain a high-energy injury to the distal radius frequently have swollen wrists. Because of this reason, it is difﬁcult to palpate the traditional extensor tendon landmarks for wrist arthroscopy. Bony landmarks, however, usually can still be palpated and marked. The traditional viewing portal is the 3–4 portal, which is made between the third and fourth extensor compartments. The 3 to 4 portal is in line with the radial border of the long ﬁnger. The 4–5 working portal is made in line with the mid-axis of the ring ﬁnger. The extensor carpi ulnaris usually can be palpated. The 6-U portal is made ulnar to the tendon, and the 6-R working portal may be made radial to the extensor carpi ulnaris. Precise portal placement is mandatory for arthroscopic-assisted reduction of distal radius fractures. If the portal is placed too proximal, the arthroscope may be placed within the fracture itself, and if it is placed too distally can cause injury to either the articular surface of the carpus, or the interosseous ligaments. It is extremely useful to place an 18-gauge needle into the proposed portal location prior to making a skin incision (Fig. 6). A portal is made by pulling the skin with the surgeon’s thumb against the tip of a No. 11 blade. This decreases the risk of injury to the cutaneous nerves. Blunt dissection is then continued with a hemostat to the level of the joint capsule. The arthroscope with a blunt trocar is initially introduced into the 3 to 4 portal, which is the primary viewing portal in wrist arthroscopy.

FIGURE 6 Patients who sustain a distal radius fracture frequently have swollen wrists. It is important to utilize the bony landmarks to identify the precise location of the wrist arthroscopy portals. It is helpful prior to committing to a skin incision to place a needle in the proposed portal location.

& INDICATIONS Ideal timing for arthroscopic-assisted reduction of distal radius fractures appears to be between 3 and 10 days. Earlier attempts at arthroscopic ﬁxation may result in troublesome bleeding which obscures visualization. Fractures that are over 10 days old are difﬁcult to disimpact and elevate up with percutaneous techniques. LaFontaine has described several radiographic features that signify when a fracture of the distal radius is unstable (14). These features include initial dorsal angulation greater than 208, extensive dorsal comminution, associated ulnar styloid fractures, signiﬁcant intra-articular involvement, and patient age greater than 60 years. Fractures without extensive metaphyseal comminution are most ideal for arthroscopic-assisted management. Radial styloid fractures, die punch fractures, three-part “T” fractures, and four-part fractures are all indicated for arthroscopic-assisted reduction and internal ﬁxation (15). Three-part and four-part fractures are managed by a combination of arthroscopic-assisted ﬁxation and open reduction. In these incidences, the fracture is stabilized by a volar plate through a volar approach. The joint capsule is not incised. The fracture is provisionally pinned and stabilized under ﬂuoroscopy. Final articular reduction is then performed as the joint surface is arthroscopically visualized. The fracture fragments are manipulated arthroscopically, and then the distal screws are inserted through the plate to stabilize the fracture.

& SURGICAL TECHNIQUE & Radial Styloid Fractures A radial styloid fracture is the most ideal fracture pattern to manage arthroscopically, particularly if one is just beginning to gain experience with arthroscopic-assisted ﬁxation of distal radius fractures (16). Closed reduction and percutaneous ﬁxation of the radial styloid fragment may be attempted under ﬂuoroscopy. The radial styloid fragment can almost always be closed reduced. Following percutaneous stabilization, the wrist may then be placed in traction and arthroscopically evaluated. This allows the fracture hematoma debris to be washed out and also to assess for any associated intra-articular soft tissue injuries. The arthroscope is initially placed in the 3 to 4 portal and the reduction of the radial styloid fracture is observed. However, with the arthroscope placed in the 3 to 4 portal, it comes directly over the fracture site. It is best then to place the arthroscope in the 4 to 5 or 6-R portal to look across the wrist to judge the rotation and reduction of the radial styloid fragment. Frequently, the articular reduction may look anatomic under ﬂuoroscopy, but the radial styloid fragment may be still slightly rotated as viewed arthroscopically. The guidewires may be backed out of the shaft leaving them only in the radial styloid fragment if the radial styloid is rotated. The guidewires may then be utilized as joysticks to control the rotation of the radial styloid fragment and then advanced across the fracture site once the reduction is judged anatomic as viewed arthroscopically. A trocar may be introduced through the 3 to 4 portal to provide additional control of the radial styloid fragment as it is being manipulated with the joysticks. The positions of the guidewires are then checked under ﬂuoroscopy. If the guidewires are in appropriate position, a cannulated screw may be placed over the guidewire through a cannula to stabilize the radial styloid fragment. Early in the author’s experience, only Kirschner wires were utilized to stabilize the radial styloid fragment. However, the

Reduction of Intraarticular Distal Radius Fractures & 227

FIGURE 7 A guidewire may be placed in the radial styloid alone, but not across the fracture site to be utilized as a joystick.

protruding Kirschner wires frequently irritated the skin and potentially hampered rehabilitation. Now, headless cannulated screws are preferred to stabilize the radial styloid fragment. This eliminates any soft tissue irritation from the Kirschner wires protruding from the skin. Recently, new self-drilling headless screws have been introduced (Acutrak II-Acumed, Beaverton, Oregon, U.S.A.) which now eliminates the step of drilling and further simpliﬁes the procedure. The headless screw decreases any metal prominence exiting from the bone, which decreases irritation of the thumb extensor tendons and helps promote an earlier range of motion. An alternative technique to stabilize the radial styloid fragment is to place the guidewires under ﬂuoroscopy in the radial styloid fragment alone and not cross the fracture site (Fig. 7). The position of the guidewire in the radial styloid fragment in relation to the fracture is viewed directly under

FIGURE 8 Arthroscopic view of a displaced radial styloid fracture with the scope in the 6-R portal. The previously inserted guidewire can be seen just into the radial styloid fragment to be used as a joystick.

FIGURE 9 Arthroscopic view with the arthroscope in the 6-R portal showing anatomic reduction of the radial styloid fracture using a combination of the previously inserted guidewire and a trocar inserted into the 3 to 4 portal. The 6-R portal is the best portal to judge rotation of the radial styloid fracture.

ﬂuoroscopy. The wrist is then suspended in a traction tower and the standard arthroscopy portals are made. Again, the best portal to judge rotation of the radial styloid fragment is with the arthroscope in the 6-R portal. The arthroscope is placed in the 6-R portal, and then the joysticks are used to manipulate and control rotation of the radial styloid fragment back to the articular surface of the distal radius (Figs. 8 and 9). Once the fracture is judged anatomic as viewed arthroscopically, the guidewires are advanced across the fracture site (Figs. 10–12). It is important when the guidewires are initially placed into the radial styloid to protect the surrounding soft tissues,

FIGURE 10 Lateral radiograph showing a fracture dislocation of the radial styloid.

228 & Geissler

FIGURE 11 Lateral radiograph following arthroscopic reduction and stabilization with a headless cannulated screw. Notice how the carpus is reduced with the radial styloid fragment.

particularly the dorsal sensory branch of the radial nerve. The guidewires may be placed through a 14-gauge needle or, alternatively, an oscillating drill is used to insert the guidewires. The cutaneous nerves will not wrap around the Kirschner wires as they are being inserted with an oscillating drill.

& Three-Part Fractures Three-part fractures involve the displaced fracture of the radial styloid and lunate facet. In three-part fractures, the radial styloid may be closed reduced and percutaneously stabilized under ﬂuoroscopic guidance. The radial styloid fragment may then be utilized as a landmark to which the depressed lunate facet fragment is reduced. Following percutaneous reduction and stabilization of the radial styloid fragment, the wrist is then suspended in the traction tower and fracture hematoma and

FIGURE 12 Posteroanterior radiograph showing anatomic restoration of the articular surface following the fracture dislocation to the distal radius. A headless cannulated screw is utilized rather than multiple Kirschner wires as it facilitates rehabilitation.

FIGURE 13 Posteroanterior radiograph showing a displaced three-part fracture of the distal radius.

debris are arthroscopically evacuated. The depressed lunate facet fragment is best seen with the arthroscope in the 3 to 4 portal. An 18-gauge needle may be placed percutaneously directly over the depressed fragment and utilized as a landmark. A large Steinmann pin is then placed approximately 2 cm proximal to the 18-gauge needle into the depressed lunate fragment, which is then elevated. Once the fragment is elevated back to the radial styloid fragment, a bone tenaculum is useful to reduce the fracture gap between the radial styloid fragment and the lunate facet fragment and to provide provisional stabilization. Once the fracture fragments are anatomically reduced as viewed arthroscopically, guidewires are then placed transversely from the radial styloid into the lunate facet fragment. The guidewires are placed into the subchondral bone. If a dorsal die punch fragment is present, it is important that the guidewires are aimed dorsally to capture this dorsal fragment. In addition, it is important to pronate and supinate the wrist to insure the transverse pins have not violated the DRUJ. The transverse pins may appear under ﬂuoroscopy to not have penetrated the DRUJ, but because of the concave nature of the DRUJ, in actuality they may have protruded into the joint (Figs. 13 and 14). Headless cannulated screws are then placed over the transverse guidewire to stabilize the lunate facet fragment. One headless cannulated screw may be placed to stabilize the radial styloid fragment and a second screw is then placed transversely over the guidewire to support the impaction of the lunate facet fragment (Figs. 15–18). The headless cannulated screws again decrease soft tissue irritation when compared to protruding Kirschner wires, and promotes earlier range of motion and rehabilitation. A bone graft may be placed

Reduction of Intraarticular Distal Radius Fractures & 229

FIGURE 16 Arthroscopic view with the arthroscope in the 3 to 4 portal showing the displaced lunate facet fragment.

FIGURE 14 Posteroanterior radiograph following arthroscopic reduction with Kirschner wires of the three-part distal radius fracture.

FIGURE 17 Arthroscopic view following reduction of the lunate facet fragment. The 3 to 4 portal is the best portal to view reduction and elevation of an impacted lunate facet fragment.

FIGURE 15 Posteroanterior radiograph showing a displaced three-part fracture of the distal radius.

FIGURE 18 Two headless cannulated screws were utilized to support the reduction. One headless screw was placed through the radial styloid fragment and the second transversely in the subchondral bone to stabilize the impacted lunate facet fragment. Headless cannulated screws are preferred over Kirschner wires, which hamper rehabilitation.

230 & Geissler

FIGURE 19 Displaced three-part fracture of the distal radius with metaphyseal comminution.

through a small dorsal incision between the fourth and ﬁfth dorsal compartments to avoid late settling of fracture fragments if extensive metaphyseal comminution is present.

& Three-Part Fractures with Extensive Metaphyseal Comminution

FIGURE 21 The ﬂuoroscopic view following percutaneous stabilization of the fracture and provisional placement of the volar plate. An attempt is made to reduce the articular surface as closely as possible under ﬂuoroscopic control.

A volar plate may be utilized if extensive metaphyseal comminution is present (Fig. 19). Early in the author’s experience, these fractures were stabilized with Kirschner wires and headless cannulated screws with additional bone graft. However, with the recent introduction and popularity of volar plate stabilization for fractures of the distal radius, a combined open and arthroscopic approach is now recommended. These strong volar plates have excellent ﬁxation in patients with good bone stock, and promote earlier range of motion and rehabilitation. In this scenario, a standard volar approach is made over the radial side of the ﬂexor carpi radialis tendon. Dissection is continued down the sheath with the ﬂexor pollicis longus

FIGURE 20 In three-part fractures with metaphyseal comminution, a combination of open surgery with arthroscopic surgery is preferred. An Acu-loc (Acumed, Beaverton, Oregon) volar distal radius plate is placed through a standard volar incision.

FIGURE 22 The wrist is then suspended in the ARC (Beaverton, Oregon) traction tower where the articular reduction may then be ﬁne tuned arthroscopically.

Reduction of Intraarticular Distal Radius Fractures & 231

FIGURE 23 Frequently, multiple loose bodies may be identiﬁed in the joint. Sometimes these loose bodies may block reduction and are removed.

identiﬁed and retracted ulnarly. The pronator quadratus is released off its radial border exposing the fracture site. The radial styloid fragment can be anatomically reduced back to the shaft as viewed directly through the incision. It is frequently helpful to release the brachioradialis to facilitate reduction of the radial styloid fragment. The lunate facet fragment may be seen through the volar approach and can be anatomically reduced and pinned. A volar plate is placed and the fracture provisionally pinned through the plate as viewed ﬂuoroscopically (Figs. 20 and 21). The wrist is then suspended in the traction tower and the articular reduction is viewed arthroscopically (Figs. 22–24). If the articular reduction is not anatomic, the pins may be removed from the plate and the articular reduction may be ﬁne tuned as viewed arthroscopically. Once the reduction is felt to be anatomic, the pins are placed back through the plate to provisionally stabilize the fracture (Fig. 25). The most distal screws are then placed through the plate into the articular fragments.

FIGURE 24 Arthroscopic view showing the volar wrist capsule to have pulled off the distal radius. In this case, the capsule was in the fracture site initially blocking reduction.

FIGURE 25 The volar capsule was arthroscopically removed from the fracture site, the fracture could then be anatomically reduced and stabilized. Once the articular reduction was judged to be anatomic under arthroscopy, the distal locking screws were placed into the plate. It is helpful to place the ﬁrst screw in a non-locking mode to help reduce the bone to the plate. The remainder of the screws are then placed in a locking fashion.

In dorsal die punch fractures, arthroscopy is especially a useful adjunct (17). The dorsal die punch fragments are difﬁcult to view frequently through a volar approach (Fig. 26). In these fractures, the volar plate is placed and the fracture is provisionally pinned under ﬂuoroscopy. The wrist is then suspended in the traction tower, and the reduction of the dorsal die punch fragment is arthroscopically evaluated (Fig. 27). Frequently, it still needs to be further elevated. The dorsal die punch fragment is best visualized with the arthroscope either in the 6-R portal, or through the volar portal (18). The volar portal is made by placing the arthroscope with a blunt trocar between the radial

FIGURE 26 Computed tomography scan showing a distal-dorsal lip fracture of the distal radius.

232 & Geissler

FIGURE 27 Arthroscopic view with the arthroscope in the 6-R portal to view the dorsal lip fracture following reduction. Arthroscopy can be a valuable adjunct in these very distal dorsal lip fractures. The pins through the plate may be visualized going into the fracture fragments directly, arthroscopically conﬁrming secure ﬁxation of the dorsal lip fragments when a plate is placed on the volar surface.

scaphocapitate and long radial lunate ligament. The cannula is pushed through this interval, and is then seen through the volar incision. A switching stick is then placed through the arthroscopic cannula into the volar incision. The arthro-

FIGURE 29 Fluoroscopic view conﬁrming the locking screw is being placed into the distal dorsal lip fragment.

scopic cannula is then placed over the switching stick and the arthroscope may be placed into the volar portal to view the dorsal die punch fragment (Fig. 28). In the author’s experience, the dorsal die punch fragment is usually well visualized with the arthroscope in the 6-R portal. This fragment is then further elevated percutaneously with a Steinmann pin. Once the articular surface is judged anatomic, the fracture fragment is pinned through the plate. As the distal screws are inserted into the plate, the screws may be seen arthroscopically to directly enter into the dorsal die punch fragment (Fig. 29). This ensures anatomic reduction and stabilization of the dorsal die punch fragment, which would be very difﬁcult through a traditional open volar approach.

& Four-Part Fractures

FIGURE 28 The articular reduction of the dorsal lip may be viewed either with the arthroscope in the 6-R portal or as demonstrated here with the arthroscope in the volar portal between the radial scaphocapitate and long radial lunate ligaments.

In four-part fractures, the lunate facet is divided into volar and dorsal fragments. The volar–ulnar fragment is unable to be reduced by closed manipulation. Traction causes the palmar wrist capsule to rotate the volar–ulnar fragment. In four-part fractures, a standard volar approach is made to the distal radius as described above. The radial styloid fragment is reduced under direct visualization through the open incision. The volar–ulnar fragment is then reduced under direct observation by reducing it back to the shaft and to the radial styloid fragment. It may then be provisionally pinned transversely. A volar distal radius plate is then placed and the fracture fragments are provisionally pinned. The wrist is then suspended in the traction tower and the arthroscope is placed in the 3 to 4 portal. The dorsal–ulnar fragment is best viewed with the arthroscope either in the 6-R portal or through the volar portal. The dorsal–ulnar fragment is then percutaneously elevated back to the radial styloid and then the reduced volar–ulnar fragment, which are used as landmarks. The dorsal–ulnar fragment is then provisionally pinned, and the distal screws are placed through the plate to stabilize the dorsal fragments. Particularly in small dorsal fragments, the arthroscope is a usual adjunct to directly view the insertion of the screws into the dorsal fracture fragments.

Reduction of Intraarticular Distal Radius Fractures & 233

& Ulnar Styloid Fractures Stabilization of an associated ulnar styloid fragment is quite controversial (19). Wrist arthroscopy provides some rationale as to when to stabilize an associated ulnar styloid fragment. The tension of the articular disc is palpated arthroscopically following anatomic reduction of the distal radius fracture. The articular disc is best viewed with the arthroscope in the 3 to 4 portal. A probe is then inserted through the 6-R portal to palpate the disc. If there is good tension to the articular disc when palpated, the majority of the ﬁbers of the triangular ﬁbrocartilage complex are felt to be still attached to the base of the ulna. A peripheral tear of the articular disc is suspected when the disc has lost its tension by palpation. A peripheral tear may be obscured by hematoma, and it is important to insert the shaver through the 6-R portal to debride any hematoma to view the ulna periphery of the articular disc. The articular disc may then be arthroscopically repaired to the base of the ulna with suture anchors if a peripheral tear is identiﬁed (20). Stabilization of a large ulnar styloid fragment is considered when the articular disc is lax when palpated and no peripheral tear is identiﬁed. In this situation, the majority of the ﬁbers of the articular disc are attached to the displaced ulnar styloid fragment. A small incision is made between the interval of the extensor carpi ulnaris and ﬂexor carpi ulnaris. Blunt dissection is carried down to protect the dorsal sensory branch of the ulnar nerve, which is located volar to the incision. The ulnar styloid fragment is cleared of fracture debris and anatomically reduced. The fragment may be stabilized by either a tension band, Kirschner wire or preferably by a small headless cannulated screw.

& OUTCOMES The literature is relatively sparse regarding the results of arthroscopic-assisted ﬁxation of displaced intra-articular fractures of the distal radius (6,16–18,21–24). Stewart et al. presented a comparison study of 12 open and 12 arthroscopicassisted reductions of comminuted fractures of the distal radius (24). In his series, all fractures were classiﬁed as Frykman type VII or VIII. In the arthroscopic group, they had ﬁve excellent, six good, and one fair result. There were no excellent results in the open group. They also concluded that the arthroscopic group had a signiﬁcantly increased range of motion as compared to that of the group that underwent open stabilization. Doi et al. reported their results in a similar comparison study of 38 patients who underwent arthroscopic-assisted ﬁxation in comparison with those patients who underwent open reduction (21). The authors similarly found that the arthroscopic group had improved range of motion as compared to the open group. Ruch reported his comparison study of 15 patients who underwent arthroscopic-assisted reduction and 15 patients who underwent closed reduction and stabilization by external ﬁxation (23). In the 15 patients who underwent arthroscopic reduction, 10 patients had a tear of the triangular ﬁbrocartilage complex. Seven of the 10 patients sustained a peripheral tear of the articular disc and underwent arthroscopic repair. No patients in the arthroscopic group had any signs of DRUJ instability at ﬁnal follow-up. In the 15 patients who underwent closed reduction and external ﬁxation, four patients presented with instability of the DRUJ at ﬁnal follow-up visit. Potentially, these patients had a peripheral tear of the triangular ﬁbrocartilage complex, which could have been acutely repaired at the time of fracture stabilization.

Geissler and Freeland reviewed their results of 33 patients who underwent arthroscopic-assisted reduction of comminuted intra-articular fractures of the distal radius (22). In their series, 25 patients had an anatomic reduction, and eight patients had a 1-mm articular step-off at ﬁnal follow-up visit. The patients were evaluated utilizing the modiﬁed Mayo wrist score, and there were 20 excellent, 10 good, and three fair results in their series. In addition, they analyzed their ﬁnal results based on associated injuries to the interosseous ligament. They noted when a Geissler Grade II injury to the scapholunate interosseous ligament was present, it did not affect the ﬁnal prognosis in any fracture pattern. Geissler Grade II injuries were evenly distributed throughout their series, and did not correlate to the ﬁnal prognosis. However, when a Geissler Grade III or IV tear was present combined with an AO Type C fracture, it signiﬁcantly affected the ﬁnal prognosis. In the ﬁve patients with AO Type C fracture without an interosseous ligament tear, all the ﬁve patients had an excellent result. However, in the ﬁve patients with an AO Type C fracture with a Geissler III or IV interosseous ligament tear, there were four good results and one fair result. It appeared that the presence of a Geissler Grade III or IV interosseous ligament tear signiﬁcantly affected the ﬁnal prognosis in AO Type C fractures in their study.

& SUMMARY Wrist arthroscopy is a valuable adjunct in the management of displaced intra-articular fractures of the distal radius. It allows for evaluation of articular reduction under bright light and magniﬁed conditions. Particularly, wrist arthroscopy allows for detection of rotation of fracture fragments, which is very difﬁcult to judge under ﬂuoroscopy. It has been previously reported that restoration of the articular surface is important and affects the patient’s ﬁnal prognosis (2–5). In addition, evacuation of the fracture hematoma and debris may result in improved range of motion as previously documented by the comparison studies of Stewart and Doi (21,24). Wrist arthroscopy also allows for the detection and management of associated intra-articular soft tissue injuries, which have been shown to occur frequently with intra-articular fractures of the distal radius. It is felt that management of acute soft tissue injuries has a better prognosis as compared to chronic reconstruction. Tears of the triangular ﬁbrocartilage complex have been shown to be the most frequently associated soft tissue injury associated with fractures of the distal radius. This may explain why patients continue to complain of persistent ulnarsided wrist pain despite an anatomically healed fracture of the distal radius (10,13,19). Chondral defects or loose bodies which frequently are not seen on plain radiographs are frequently identiﬁed arthroscopically and can be removed from both the radiocarpal and midcarpal spaces. Lastly, wrist arthroscopy provides a rationale of when to stabilize displaced ulnar styloid fragments when associated with a fracture of the distal radius (17).

& SUMMATION POINTS

Indications &

One-, two-, three-, or four-part distal radius fractures.

&

Ulnar styloid fracture when associated with DRUJ instability or laxity in the triangular ﬁbrocartilage complex. When combined with a volar plate: fractures with metaphyseal comminution.

&

234 & Geissler

Outcomes & & & &

Ninety percent good and excellent results (Geissler and Freeland) Detection of associated soft-tissue pathology Allows earlier range of motion (ROM) from evacuation of hematoma Early detection and treatment of associated DRUJ injury.

Complications & & &

Infection Swelling/compartment syndrome from ﬂuid extravization Nerve and vessel injury.

& REFERENCES 1. 2. 3. 4. 5. 6. 7. 8. 9.

Short WH, Palmer AK, Werner FW, et al. A biomechanical study of distal radial fractures. J Hand Surg 1987; 12A:529–34. Trumble TE, Schmitt SR, Vedder NB. Fractures affecting functional outcome of displaced intraarticular distal radius fractures. J Hand Surg [Am] 1994; 19A:325–40. Bradway JK, Amadio PC, Cooney WP. Open reduction and internal ﬁxation of displaced comminuted intraarticular fractures of the distal end of the radius. J Bone Joint Surg 1989; 71A:839–47. Knirk JL, Jupiter JB. Intraarticular fractures of the distal end of the radius in young adults. J Bone Joint Surg 1986; 68A:647–58. Fernandez DL, Geissler WB. Treatment of displaced articular fractures of the radius. J Hand Surg 1991; 16:375–84. Edwards CC, III, Harasztic J, McGillivary GR, Gutow AP. Intraarticular distal radius fractures: arthroscopic assessment of radiographically assisted reduction. J Hand Surg 2001; 26:A1036–41. Fontes D, Lenoble E, DeSomer B, et al. Lesions ligamentaires associus aux fractures distales du radius. Ann Chir Main 1992; 11:119–25. Hanker GJ. Wrist arthroscopy in distal radius fractures. In: Proceedings, Arthroscopy Association North America Annual Meeting. Albuquerque, NM, 1993. Hixon ML, Fitzrandolph R, McAndrew M, et al. Acute ligamentous tears of the wrist associated with colles fractures. In: Proceedings, American Society for Surgery of the Hand. Baltimore, MD, 1989.

10. Lindau T. Treatment of injuries to the ulnar side of the wrist occurring with distal radial fractures. Hand Clin 2005; 21:417–25. 11. Mohanti RC, Kar N. Study of triangular ﬁbrocartilage of the wrist joint in Colles fracture. Injury 1979; 11:311–24. 12. Mudgal CS, Jones WA. Scapholunate diastasis: a component of fractures of the distal radius. J Hand Surg 1990; 15B:503–5. 13. Geissler WB, Freeland AE, Savoie FH, et al. Carpal instability associated with intra-articular distal radius fractures. In: Proceedings, American Academy Orthopedic Surgeons Annual Meeting. San Francisco, CA, 1993. 14. Lafontaine M, Hardy D, Delince P. Stability assessment of distal radius fractures. Injury 1989; 20:208–10. 15. Melone CP. Articular fractures of the distal radius. Orthop Clin North Am 1984; 15:217–35. 16. Geissler WB. Arthroscopically assisted reduction of intraarticular fractures of the distal radius. Hand Clin 1995; 11:19–29. 17. Geissler WB. Intraarticular distal radius fractures: the role of arthroscopy? Hand Clin 2005; 21:407–16. 18. Levy HJ, Glickel SZ. Arthroscopic assisted internal ﬁxation of intraarticular wrist fractures. Arthroscopy 1993; 9:122–3. 19. Hollingworth R, Morris J. The importance of the ulnar side of the wrist in fractures of the distal end of the radius. Injury 1976; 7:263. 20. Geissler WB, Savoie FH. Arthroscopic techniques of the wrist. Mediguide Orthop 1992; 11:1–8. 21. Doi K, Hatturi T, Otsuka K, Abe T, Tamamoto H. Intraarticular fractures of the distal aspect of the radius arthroscopically assisted reduction compared with open reduction and internal ﬁxation. J Bone Joint Surg 1999; 81A:1093–110. 22. Geissler WB, Freeland AE. Arthroscopically assisted reduction of intraarticular distal radial fractures. Clin Orthop 1996; 327:125–34. 23. Ruch DS, Vallee J, Poehling GG, Smith BP, Kuzma GR. Arthroscopic reduction versus ﬂuoroscopic reduction of intraarticular distal radius fractures. Arthroscopy 2004; 20:225–30. 24. Stewart NJ, Berger RA. Comparison study of arthroscopic as open reduction of comminuted distal radius fractures. In: Presented at the 53rd Annual Meeting of the American Society for Surgery of the Hand [Programs and Abstracts]. Scottsdale, AZ, January 11, 1998.

29 Arthroscopic Treatment of Metacarpophalangeal Joint Fractures in the Hand Rocco A. Barbieri, Jr.

Southern Bone & Joint Specialists, Hattiesburg, Mississippi, U.S.A.

& INTRODUCTION Arthroscopic stabilization of intra-articular fractures is a technique that is widely accepted for the treatment of fractures of the knee, shoulder, and wrist. Very little has been published regarding the use of these techniques for the small joints in the hand. It has only been in the past decade that reports have surfaced regarding the use of arthroscopy to treat fractures in the hand (1). This has corresponded largely to the development of smaller arthroscopes (1.9 mm) and smaller instrumentation. Techniques to stabilize intra-articular fractures of the hand stress the importance of anatomically restoring the joint surface within less than 1 mm of step-off (2,3). For fractures of the metacarpophalangeal joint this traditionally has required an open approach that necessitated mobilization of the surrounding tendons and a capsulotomy to permit visualization. Unfortunately a common response to arthrotomy in the digits is stiffness, devitilization of bone fragments, and delayed healing (4). These adverse effects have focused attention towards alternative, less invasive ways to stabilize these uncommon but difﬁcult fractures. The assistance of arthroscopy provides superior visualization through magniﬁcation and the ability to manipulate small articular fragments into place while limiting the insult to the surrounding soft tissue.

& INDICATIONS Simple two part fractures with displacement greater than 1 mm involving the metacarpal head or the base of the proximal phalanx are amenable to arthroscopic treatment. This includes both the adult and pediatric population since the growth plates can be stabilized without additional trauma. These indications are similar to those employed for comparable open techniques. Contraindications to the use of metacarpophalangeal joint arthroscopy in fracture treatment include those cases with poor soft tissue coverage, open fractures, and active cellulitis. Other contraindications are fractures with three or more fragments or in which there is an associated diaphyseal component that cannot be reduced easily through percutaneous means. These fractures are extremely tedious and difﬁcult to stabilize arthroscopically and are better suited for open techniques.

& CONSIDERATIONS FOR PREOPERATIVE PLANNING Preoperative assessment of surgical candidates initially focuses on the condition of the digit. There is typically tenderness and swelling of the involved joint and any lacerations present should lead to a high suspicion of an open articular injury. Often with displaced articular fragments there is a fair amount of rotational malalignment. In addition, one should note for

the presence of very frail or “rice paper skin” as seen in patients with chronic disease or on steroids. In these individuals great care must be taken if small joint arthroscopy is performed since the traction forces may signiﬁcantly disrupt the skin. X-rays are an essential component in determining the location of the fracture and in helping to decide how the particular fragments may be best stabilized. CT scans are occasionally useful as an adjunct to X-rays to assist in clarifying the degree of displacement and the size and number of the articular fragments.

& SURGICAL TECHNIQUE The patient is placed supine on the operating table and induced with regional or general anesthesia. A well-padded pneumatic tourniquet is applied to the arm and is often utilized. The affected arm is positioned on a radiolucent arm table and the surgeon is positioned at the cephalic side of the arm. The assistant is located adjacent to the surgeon allowing access to the lateral end of the hand table by C-arm. Finally, the video equipment is positioned at the foot of the table to permit easy visualization. Special small joint instruments are required for arthroscopy of the metacarpophalangeal joints. Ideally a 1.9 mm 308 arthroscope is used in conjunction with a 2.2 mm cannula. It has also been possible to employ a 2.3 mm 308 scope but the extra 0.4 mm of diameter seems to limit one’s ability to easily move around the metacarpophalangeal joint. Instruments and shavers generally used are between 2.0 mm and 2.5 mm. Inﬂow is provided via a gravity system utilizing a pinch pump and small joint tubing (Linvatec, Largo, FL). Traction is critical and often the affected digit and each adjacent digit are supported in ﬁnger traps in a traction device. Anywhere between 8 and 12 pounds of traction is applied throughout the case. Care is taken to place the operative ﬁnger in the line of axis of traction with the other two surrounding digits providing mainly rotational control. Often it is difﬁcult to get the ﬁnger traps to hold the digit and in most cases they can be prevented from slipping by wrapping the ﬁnger trap with Coban or in rare cases driving a 0.035 gauge Kirschner (K)-wire through the ﬁnger traps across the midaxial line of the middle phalanx. Traction time is treated identically to tourniquet time and should not exceed two hours. Elevating the tourniquet to 250 mmHg begins the procedure. Exsanguination of the arm is often unnecessary as gravity alone is sufﬁcient. The metacarpophalangeal joint is palpated and a 21-gauge needle is used to locate the portals and insufﬂate the joint with 3 ml of lactated ringers solution. In swollen hands it is occasionally difﬁcult to enter the joint and one should not hesitate to use C-arm ﬂuoroscopy to assist in localization.

236 & Barbieri

Dorsal radial portal

Dorsal Ulnar portal

FIGURE 2 The articular surface of the proximal phalanx as seen arthroscopically after stabilization with a 0.035 gauge K-wire.

FIGURE 1 The relevant anatomy and location of portals for the metacarpophalangeal joint.

Two dorsal portals have been described for metacarpophalangeal joint arthroscopy (5). They are described as the dorsal radial and dorsal ulnar portals and are named for their relative location to the extensor tendons in the digits and the thumb (Fig. 1). The 21-gauge needle is used to identify both portals and a No. 11 blade is used to open the skin only. Care must be taken when incising the skin as dorsal branches of the sensory nerves cross the portal area. A blunt probe placed in the arthroscopic sheath is utilized to penetrate both the sagittal ﬁbers and the joint capsule. The inﬂow is then hooked up to the arthroscopic cannula. The 1.9 mm arthroscope is inserted initially in the dorsal radial portal. While visualizing from within the joint the dorsal ulnar portal is then established with the blunt trocar alone. A 2.5 mm full radius shaver is then placed to clean out the joint and establish outﬂow. The arthroscopic and instrumentation portals are interchangeable. Instruments between 2.0 and 2.5 mm easily ﬁt into the joint. The procedure begins by using the 2.5 mm shaver to clean out any hematoma and to perform a partial synovectomy. Once adequate visualization has been established a systematic examination of the joint can be carried out. The surfaces of the joints are carefully examined to gain a better understanding of the fracture pattern. Note that the metacarpal head is wider at its volar aspect then the dorsal. In most joints the articular surface of the proximal phalanx is ringed by a ﬁbrocartilagenous “meniscus” that may serve as a shock absorber for forces traveling across the metacarpophalangeal joint (6). Also easily visualized are the radial and ulnar collateral ligaments. These ligaments consist of three bundles of vertically oriented ﬁbers that move relative to one another with joint motion. They originate in recesses just proximal to the metacarpal head and run to the base of the proximal phalanx. Visible just volar to these structures one can occasionally see less deﬁned ﬁbers extending to the volar plate. These thinner ﬁbers form the accessory collateral ligaments. The volar plate is next observed by placing the digit in slight ﬂexion if necessary. There is a small recess that exists between the metacarpal head and the volar plate. Occasionally loose bone fragments can be caught in this area that cannot be adequately

inspected in full digital extension. Finally the dorsal capsule is inspected for any abnormalities. The metacarpophalangeal joint of the thumb is similar to that of the digits with a few exceptions (7). The most notable difference is the presence of the articular surface of the two sesamoid bones embedded in the volar plate. These are only visible after removing a layer of synovium covering the volar plate. Another distinction is the absence of the ﬁbrocartilagenous “meniscus” surrounding the articular surface of the proximal phalanx. Once the joint has been cleaned, inspected, and probed attention is then focused on aligning the fracture fragments. This process begins with the act of cleaning out hematoma and debris between the fragments themselves. Mini curettes or small blunt probes are useful for this purpose. Occasionally traction can be reduced to allow for greater debridement between the fracture edges. Next the fragments themselves are manipulated into position. A 0.035 or 0.045 gauge K-wire is useful for this purpose and can be used as a joystick to reduce the articular fragments (Fig. 2). This author prefers to utilize the mini-acutrac system (Acumed, Beaverton, Oregon, U.S.A.), which employs a 3.0 headless screw on a 0.035 gauge wire. Once the fracture has been reduced the 0.035 gauge guide wire is inserted as perpendicular to the fracture plane as possible. A second 0.035 gauge K-wire is then inserted to maintain rotational control if screw ﬁxation is going to be attempted. Next the proper length screw is inserted over the guide wire while visualizing the fracture to ensure that the joint remains well reduced and the hardware does not penetrate the joint. C-arm ﬂuoroscopy is useful in assisting in both fracture reduction and hardware placement. After the fracture is stabilized traction is decreased and the arthroscope is used to conﬁrm stability of the construct as the ﬁnger is taken through a partial arc of motion. This process is repeated with the digit out of the traction device and under C-arm ﬂuoroscopy (Figs. 3 and 4). Once satisﬁed with the repair, the portals are closed with 4 to 0 nylon and the joint is injected with 10 ml of 0.25% marcaine without epinephrine for pain control. Postoperatively the digit is buddy taped to an adjacent ﬁnger and immediate unrestricted active motion protocol is started. Rarely, if there are concerns regarding compliance and stability the metacarpophalangeal joint is splinted in full extension when not exercising (Figs. 5 and 6).

Arthroscopic Treatment of Metacarpophalangeal Joint Fractures in the Hand & 237

FIGURE 4 A postoperative X-ray demonstrating ﬁxation of the proximal phalanx fracture of the same patient using a mini Acutrac screw.

FIGURE 3 A pre-operative X-ray of a displaced, malrotated proximal phalanx fracture of the index ﬁnger. This is the patient seen in Figure 2.

& COMPLICATIONS Complications are rare and can be avoided in most instances by gentle operative technique and a thorough understanding of the anatomy of the metacarpophalangeal joint. The most common problem is iatrogenic cartilage injury caused by overzealous penetration into the joint. Ensuring there is adequate joint distraction, using blunt instruments, and employing C-arm ﬂuoroscopy when needed to localize the joint can diminish the frequency of this problem. K-wire and screw placement around

FIGURE 5 A clinical view of the patient’s digital extension four weeks postoperatively.

238 & Barbieri

& SUMMARY Metacarpophalangeal joint arthroscopy is in its infancy. At ﬁrst glance its use may seem to be a triumph of technology over reason. However, as instrumentation becomes smaller and speciﬁc techniques are developed, arthroscopic treatment of disorders of the small joints of the hand will become more commonplace. The reduction and stabilization of fractures of the metacarpophalangeal joint arthroscopically is a technically demanding procedure. However, it has the potential to enhance the outcome of fracture treatment by limiting the exposure and the devitalization of small fragments while improving fracture reduction in a magniﬁed operative ﬁeld.

& SUMMATION POINTS FIGURE 6 A clinical view of the patient’s digital ﬂexion four weeks postoperatively.

the joint can lead to sensory nerve and tendon injury. There has been a report of a delayed extensor tendon rupture secondary to a K-wire placed in the middle phalanx for traction (1). When establishing portals care must be taken to incise the skin only and to bluntly penetrate to the joint capsule in order to avoid injuries to the dorsal sensory nerves. This is especially true when performing arthroscopy on the thumb metacarpophalangeal joint since the dorsal sensory branch of the radial nerve travels in this region. Finally, when ﬁrst beginning to master this technique one should not hesitate to convert the arthroscopic procedure to an open one if there are concerns regarding the quality of the reduction or the placement of the hardware.

Indications

Simple, closed two-part fracture of the metacarpal head or phalangeal base.

Outcomes

Have shown increased motion and an earlier return to function when compared to a similar cohort treated via conventional open means.

Complications

Involve damage to the surrounding structures of the metacarpophalangeal joint such as the extensor tendons, sensory nerves, and articular surface. For the most part these can be avoided with fastidious surgical technique.

& REFERENCES & OUTCOMES Other than a few scattered case reports there is only one known series of metacarpophalangeal joint fractures treated arthroscopically (1,8). In this report the authors reviewed the outcomes of 14 consecutively treated patients and compared them to a matched set of similar injuries. In this series all fractures were closed injuries and involved six thumbs, two index, two long, three ring, and one little ﬁnger. The average operating time for arthroscopic-assisted reduction was 108 minutes. For the eight ﬁngers the ﬁnal metacarpophalangeal motion averaged 818 and the proximal interphalangeal motion averaged 998. The only complication was a loss of fracture reduction two weeks postoperatively that was treated with successful repeat arthroscopic surgery. The average time to return to full activities including work and sports was eight weeks. This group of patients, when compared with a matched cohort treated via open techniques, had greater motion and earlier return to function.

1. 2. 3. 4. 5. 6. 7. 8.

Slade JF, III, Gutow AP. Arthroscopy of the metacarpophalangeal joint. Hand Clin 1999; 15(3):501–27. Hastings H, II, Carroll C, IV. Treatment of closed articular fractures of the metacarpophalangeal and proximal interphalangeal joints. Hand Clin 1988; 4(3):503–27. Light TR, Bednar MS. Management of intra-articular fractures of the metacarpophalangeal joint. Hand Clin 1994; 10(2):303–14. Margles SW. Intra-articular fractures of the metacarpophalangeal and proximal interphalangeal joints. Hand Clin 1988; 4(1):67–74. Berger RA. Arthroscopy of the small joints of the hand. Atlas Hand Clin 2001; 6(2):389–408. Rozmaryn LM, Wei N. Metacarpophalangeal arthroscopy. Arthroscopy 1999; 15(3):333–7. Ryu J, Fegan R. Arthroscopic treatment of acute complete thumb metacarpophalangeal ulnar collateral ligament tears. J Hand Surg 1995; 20:1037–42. Slade JF, III, Cappelino A, Ansah P. The efﬁcacy of arthroscopic treatment of intra-articular fractures of the small joints of the hand. In: The Program of the 17th Annual Meeting. Orlando, FL: Arthroscopy Association of North America, 1998.

Part VI(B): Wrist and Hand Arthroscopy – Reconstruction

30 Triangular Fibrocartilage Tears and Ulnocarpal Impaction Vincent Ruggiero

Staten Island University Hospital, Staten Island, New York, U.S.A.

& INTRODUCTION Acute triangular ﬁbrocartilage complex (TFCC) tears and ulnocarpal impaction with associated chronic tears of the TFCC are two of the more common reasons for ulna-sided wrist pain. The use of the arthroscope as advanced the ability to diagnose and to treat these conditions. Prior to the widespread use of arthroscopy these conditions were treated with open surgical procedures. For TFCC tears these included excision or repair both of which required arthrotomy of the wrist (1). Ulnocarpal impaction was treated by ulnar shortening with plate ﬁxation or with open wafer procedure (2–4). As the tools of arthroscopy have advanced and been made to accommodate the wrist joint, it is only natural that clever surgeons would devise methods to treat these disorders with the arthroscope. The arthroscope has allowed surgeons to visualize the tears of the TFCC better and we now possess the tools to repair or debride the tears and even resect portions of the ulna head with minimally-invasive techniques.

& INDICATIONS Ulna-sided wrist pain following trauma may be caused by a tear of the TFCC. With negative radiographs and no instability, a period of immobilization should be trialed. If the pain persists or if instability is present arthroscopy should be considered. A cortisone injection may be given as treatment prior to the use of surgery. This is usually when the condition is chronic. TFCC tears, both acute, and chronic are common indications for wrist arthroscopy. Ulnocarpal impaction without associated lunotriquetral (LT) ligament tear is another indication that can be treated with wrist arthroscopy. When the LT ligament is torn along with ulnocarpal impaction and a TFCC tear, ulna shortening should be utilized as treatment. The diagnosis of the LT ligament tear is usually identiﬁed at the time of arthroscopy and can be a reason for failure of debridement of the TFCC alone (5). Open ulna shortening is used for these patients because it will tighten the ulnocarpal ligaments.

& PREOPERATIVE PLANNING The examination of the patient with ulna-sided wrist pain should include range of motion, stability of the distal radioulnar joint (DRUJ) in comparison with the opposite wrist and palpation for areas of focal tenderness. Pain elicited with palpation in fovea is consistent with a TFCC tear. Marked instability of the DRUJ is demonstrated by the “piano key” sign. The LT shuck test and ballottement test are consistent with a LT ligament tear (6). Evaluation of the wrist for extensor carpi ulnaris (ECU) subluxation should also be part of the examination. Any

deformity should be noted as may be present secondary to distal radius malunion. Imaging studies should include posteroanterior (PA) and lateral neutral rotation radiographs. This is the standard manner to determine ulna length. The elbow is at 908 of ﬂexion with the shoulder in neutral and the forearm in neutral for the lateral. The PA radiograph places the shoulder in 908 of abduction with the forearm and elbow unchanged from the lateral radiograph position. If necessary radiographs of the opposite wrist for comparison should be obtained. Probated grip radiographs may aid in the diagnosis of ulnocarpal impaction. The radiograph is performed with the forearm pronated and maximal grip effort. The ulnar variance of the grip radiograph is compared to the neutral PA ﬁlm. This has been shown to increase the ulnar variance by an average of 2.5 mm in symptomatic patients (Fig. 1A,B) (7). Magnetic resonance images (MRI) will show characteristic signs of edema in the ulna head and ulna aspect of the lunate in cases of ulnocarpal impaction. The MRI will assist in the conﬁrmation of the diagnosis of a TFCC tear. The MRI testing with a high ﬁeld magnet and an experienced radiologist can have an accuracy of 97% for detection of a tear and 92% for location (8). However, with less experienced radiologists and inadequate equipment, the sensitivity is much less (9). The MRI arthrogram may be shown in the future to make the sensitivity greater in the hands of all radiologists. The MRI is less sensitive for LT tears though it is improved by using arthrogram. TFCC lesions have been classiﬁed into two classes. Class 1 is traumatic lesions and Class 2 is degenerative lesions. Within the traumatic class there are subdivisions based upon location of the tear and within the degenerative class and also it is based upon associated lesions (Table 1) (10).

& SURGICAL TECHNIQUE & Anatomy The TFCC originates on the ulnar border of the radius and attaches to the base of the ulna styloid. This central articular disk has a border of the radioulnar ligaments. These ligaments have a function to stabilize the DRUJ during forearm rotation. This is one of the TFCCs main functions. Palmarly the complex consists of the ulnolunate and ulnotriquetral ligaments which support the ulna carpus. On the dorsal side are the ECU and its subsheath which also stabilize the ulna carpus. The central disk is avascular with the blood supply to the TFCC coming from the periphery (Fig. 2). This allows for healing of peripheral tears but in converse the central tears will not heal (11). The TFCC absorbs 20% of the load across the wrist in the ulna neutral

240 & Ruggiero (A)

TABLE 1 Palmer Classiﬁcation of TFCC Tears Class 1: Traumatic

A. Central perforation B. Ulnar-sided tear a. With distal ulnar fracture b. Without distal ulnar fracture C. Distal avulsion D. Radial avulsion a. With sigmoid notch fracture b. Without sigmoid notch fracture

Class 2: Degenerative

A. TFCC tear B. TFCC tear a. Lunate/ulnar chondromalacia C. TFCC perforation a. Lunate/ulnar chondromalacia D. TFCC perforation a. Lunate/ulnar chondromalacia b. LT ligament perforation E. TFCC perforation a. Lunate/ulnar chondromalacia b. LT ligament perforation c. Ulnocarpal arthritis

Abbreviations: LT, lunotriquetral; TFCC, triangular ﬁbrocartilage complex.

(B)

are based on the location of the portal in comparison to the compartments (Fig. 3). The portals on the ulnar side of the wrist place the dorsal sensory branch of the ulna nerve at risk of injury. The portal with the highest risk is the 6U portal secondary to its proximity to the nerve.

& Setup The basic arthroscopy equipment is necessary for the procedures to be done. A 2.7 mm 308 angle arthroscope is standard. A motorized shaver with full radius shavers or burrs is needed as various punches including a suction punch. There are also thermal ablation devices that can be used and some surgeons utilize the laser with reported good results (12). The surgery is performed under general anesthesia or an axillary block. The patient is supine on the operating room table. Various distraction devices are available. The devices will either

FIGURE 1 (A) Posteroanterior (PA) radiograph without grip. (B) PA radiograph of same patient with grip demonstrating a more positive ulnar variance.

patient. As the ulna variance becomes more positive the TFCC absorbs more of the load (10). The extensor tendons at the level of the wrist joint are divided into six compartments. The portals for wrist arthroscopy

FIGURE 2 The peripheral blood supply to the triangular ﬁbrocartilage complex looking from radial to ulna with the arthroscope in the 3–4 portal.

Triangular Fibrocartilage Tears and Ulnocarpal Impaction & 241

FIGURE 3 Common portals for wrist arthroscopy. Distraction is applied with the Traction Towerw.

be self-contained and sterile or will pull from overhead or off the end of the table. With the self-contained distraction device or the overhead traction, the wrist is in a neutral position simulating the neutral PA radiograph which was utilized to determine ulna length. The author prefers the self-contained distraction device. The arm is secured to the table after a tourniquet is applied. The method by which to secure the arm to the table is variable but one way is to place a towel over the tourniquet and secure the arm to the armboard with Cobanw (3M Corporation, St. Paul, Minnesota, U.S.A.) wrap. This provides a tight hold to the upper arm which is vital to maintain the distraction and eliminate iatrogenic cartilage injury. Some surgeons prefer to secure the upper arm after the patient is prepped and draped. In the author’s experience this has lead to loss of distraction during the procedure. The Traction Towerw (Conmed Linvatec, Largo, Florida, U.S.A.) is assembled per protocol after prepping and draping. Fingertraps are placed on the index and ring ﬁngers and then they are attached to the tower. Ten pounds of traction is pulled by direct means. There is a dial on the device which can ﬁne tune the distraction if it is necessary during the operative procedure. Once the arm is in traction the portals are marked out. The portals for wrist arthroscopy are based on the position of the extensor compartments. Starting at Listers tubercle and advancing 1-cm distal is the 3–4 portal. It is between the crossing extensor pollicis longus and the extensor digitorum communius. Advancing another centimeter distal is the midcarpal radial portal. The ulnar edge of the fourth compartment can be palpated. Just ulnar to the fourth compartment and radial to

the ﬁfth compartment (extensor digiti minimi) is the 4–5 portal. One centimeter distal to that is the midcarpal ulna portal. This can also be palpated as a sulcus between the capitate, hamate, lunate, and triquetrum intersection. The ECU is palpated and a portal is marked just ulnar as the 6U and just radial as the 6R. The ECU is also marked out as is the articular surface of the distal radius and ulna (Fig. 3). The limb is exsanguinated and the tourniquet inﬂated to 250-mm Hg. The 3–4 portal is localized with an 18-gauge needle and then the joint is ﬁlled with normal saline. If the ﬂuid ﬂows freely with no endpoint, it implies that a tear is allowing ﬂuid to ﬂow into either the midcarpal or DRUJ. This should be noted in the operative report. Then the skin is incised with an 11 blade scalpel and using a blunt hemostat the tissues are spread to the capsule. The blunt trocar is introduced into the radiocarpal joint and the wrist scope is placed into the cannula. Inﬂow is coming through the cannula. Various systems exist for maintaining distension. There are pumps that maintain constant pressure or manual devices using a syringe or pinch valve to keep the joint distended. To establish the 4–5 portal, an 18-gauge needle is used to localize its position under direct arthroscopic visualization. Again an 11 blade is used to open the skin and spread down to the capsule with a blunt hemostat and then enter into the joint with the blunt hemostat. At times, a 6U portal is utilized for outﬂow (if using thermal ablation devices). An angled probe is placed in the 4–5 portal and diagnostic arthroscopy is carried out. Diagnostic arthroscopy is performed in the routine manner to examine all the intra-articular structures, but for the purpose of this chapter, discussion is limited to disorders on the ulnar side of the wrist. The TFCC is palpated with the probe and if a tear is found it can be further evaluated by making 6U portal for instrumentation and switching the scope to the 4–5 portal. This also allows for better visualization of the LT ligament just distal and ulnar to the TFCC. The author has found that the 6R portal is also of value and can be made instead of the 4–5 portal once again under direct vision using an 18-gauge needle to localize.

& TFCC Debridement After a diagnostic arthroscopy is performed, the debridement starts with the scope in the 3–4 portal and the 2.9 mm full radius shaver in the 4–5 (or 6R) portal. Up to two-third of the TFCC can be debrided without comprising DRUJ stability (13). Various small joint arthroscopy tools can be utilized to assist in the debridement depending on the size of the tear. Common tools are the side biters and a suction punch but whatever device works best for the surgeon and the tear should be used. After debridement is performed with the arthroscopy tools, the shaver is used to smooth the edges of the TFCC to a stable rim (Figs. 4 and 5). Various thermal ablation wands are now available to debride the TFCC. One must be careful with their use. It is important to make sure that the articular cartilage is not touched with the devices to prevent chondrolysis and outﬂow must be used to ensure that the temperature of the ﬂuid in the joint does not go too high. If complete debridement cannot be carried out with the scope in the 3–4 and the instruments in the 4–5, then the scope can be switched to the 4–5 portal and the tools placed in the 6U portal. No closure is performed on the portal sites. A dressing and short arm splint is applied allowing digital motion. The patient maintains elevation for 48 hours. At one week postoperative the dressing is removed and motion is begun supervised by a hand therapist.

242 & Ruggiero

FIGURE 4 Palmer 1A tear. Probe is in the central tear.

Case Example-TFCC Debridement

A ﬁfty-six-year-old male sustained injury to right wrist in a fall three months prior to presentation to the ofﬁce. He reported ulna-sided wrist pain with activity since the injury. His primary care physician treated him with nonsteroidal anti-inﬂammatory medications and splinting with no relief. His radiographs were negative and an ulnar neutral variant was present. A cortisone injection into the ulna side of his wrist gave temporary relief of symptoms. Eventually, he was taken to the operating room where arthroscopy was performed and a Palmer 1A TFCC tear was identiﬁed (Fig. 4). He had successful debridement performed (Fig. 5) and went back to preinjury activity status.

& TFCC Repair The setup and initial diagnostic arthroscopy is carried out as for the debridement. The TFCC is palpated with the probe and if it

FIGURE 5 Debrided Palmer 1A. Probe is on the triangular ﬁbrocartilage complex and the ulna head is deep.

FIGURE 6 Lost trampoline effect of TFCC secondary to peripheral TFCC tear. Abbreviations: TFCC, triangular ﬁbrocartilage complex.

has lost its normal trampoline effect (Fig. 6) and if the ulnar edge is torn then a repair is performed (14). The author’s preference is to perform an outside-in repair. The edges of the TFCC on the ulnar side are debrided with a full radius shaver so as to stimulate healing on that side (Fig. 7). There is a rich blood supply to the ulnar aspect of the TFCC which allows for healing in contrast to the avascular central portion. Once the debridement is complete a longitudinal skin incision is made over the ECU about 1 to 1.5 cm in length. The sheath is opened and the ECU is retracted either dorsal or volar whichever will allow for easier placement of the needles. There are various commercially available devices for repair of the TFCC. They all have in common a needle which will allow for a suture to be passed and a loop to withdraw the suture (Fig. 8). Once the needle is passed through the ECU sheath then it is passed through the TFCC from its undersurface while visualizing the passage with the arthroscope. A 2-0 polydioxanone (PDS) suture is threaded through the needle with the assistance of a Caspari suture wheel. The free end of the suture can be

FIGURE 7 Palmer 1B triangular ﬁbrocartilage complex tear with probe demonstrating unstable peripheral edge.

Triangular Fibrocartilage Tears and Ulnocarpal Impaction & 243

notch of the radius is debrided with a burr taking care not to damage the articular surface of the radius or the carpus. Through the 6U portal and using a cannula, 0.062-inch K-wires are passed from the ulna side of the radius through the radial side. Once the wire has passed through the radial side it is withdrawn and then passed again. At least two passes are necessary but the repair is easier with more tunnels created. Then using a 2-0 PDS that is double armed with Tuohy needles the TFCC is sutured back to the radius. The needles are passed through the TFCC from the 6U portal through the cannula and into one of the drill holes in the radius. Both needles are passed through separate drill holes. The needles are passed out the radial side of the wrist and then with an open incision dissection is carried out to the exit from the radius. The sutures are brought into the same plane. One must avoid the sensory branch of the radial nerve and the extensor tendons. The sutures are tied down over the radius and the repair is complete (15). FIGURE 8 Suture being passed from the periphery through the suture passer.

withdrawn out of the wrist through the sheath with the loop. The loop may or may not have been passed through the TFCC. If it is passed through the TFCC then the suture will now be a U-stitch which is ideal otherwise it is a simple stitch that is made. If a simple stitch is passed it is ideal to pass two separate sutures. The ends of the suture are pulled tight and then while directly visualizing the TFCC the sutures are tied down to the ECU sheath (Fig. 9). The ECU is placed back in the sheath but the dorsal aspect of the sheath is not closed. The skin is closed over the open incision but the portals are not closed. No Kirschner (K) wires are used. A sugar tong splint with the forearm in neutral position is placed with the postoperative dressing. At the ﬁrst postoperative visit, the dressing is removed and a Munster style cast is applied limiting supination/pronation for a total of six weeks from surgery. After the cast is removed, the patient is place into a hand therapy program to restore motion ﬁrst and then to regain strength. Palmer Type 1D TFCC tears can also be treated with the arthroscope. The setup and diagnostic arthroscopy are carried out as previously described. The free edge of the tear is debrided with an arthroscopic full radius shaver. The sigmoid

FIGURE 9 Repair of triangular ﬁbrocartilage complex.

Case Example-Palmer 1B Tear

A thirty-nine-year-old right-hand dominant male carpenter reports an injury to his right wrist. He was using a drill when the bit bound and he sustained a torque injury to his right wrist. He ended up going to the emergency room but radiographs were negative with ulnar neutral variance. He had tenderness on examination in the fovea of the ulna side of the wrist. Mild instability was noted in comparison to the opposite side. A presumptive diagnosis of a TFCC tear was made. This was conﬁrmed on MRI and at the time of arthroscopy a Palmer 1B tear was noted (Fig. 7). An outside-in repair was performed (Figs. 8 and 9), and the patient was immobilized in a Munster cast for six weeks. He did well in a postoperative therapy program and returned to work as a carpenter at three months from surgery.

& Arthroscopic Wafer The setup is the same as for the previous procedures except that a mini c-arm is also needed. This is positioned in a way to obtain radiographs to determine that enough bone has been resected. This can be difﬁcult to arrange with all of the arthroscopy equipment being present. It is advisable to conﬁrm that the image will be able to be brought in easily prior to prepping and draping the ﬁrst times that the procedure is performed. Once sufﬁcient skills are obtained with the resection, the use of ﬂuoroscopy can be eliminated. The TFCC tear is the access to the ulna head that is necessary to perform the resection. The ﬁrst step is to debride the tear to a stable rim which will also allow better visualization of the ulnar head. Utilizing a small joint burr, 2 mm, the ulna head is abraded so the entire articular surface is removed. The known size of the burr can be used as a template to know how much bone is being removed. Starting on the radial side the ulnar head is debrided and then the burr is brought ulnar. At this time, the arthroscope is in the 3–4 portal and the burr is in the 6R portal. The arm must be brought through an arc of passive supination and pronation to see the entire ulna head so the resection can be adequately performed. The arthroscope must be passed into the 4–5 or 6R portal to check on the resection. The DRUJ portal may also need to be used to do a portion of the resection. Two portals for arthroscopy of the DRUJ are described. One is the proximal portal which is proximal to the sigmoid notch. The second portal is distal to the sigmoid notch. At times, the 2.7-mm arthroscope may be too larger to ﬁt in the joint; therefore a smaller arthroscope is needed. Usually 2 mm of bone must be removed to create an ulna negative wrist (Fig. 10). The postoperative dressing included a short arm splint. Supervised hand therapy is

244 & Ruggiero

U H

FIGURE 10 Arthroscopic wafer procedure demonstrating resected UH. Small arrows on the UH. Large arrows on the triangular ﬁbrocartilage complex rim. Abbreviations: UH, ulnar head. Source: Courtesy of Andrew K. Palmer M.D.

begun at week 1 with an emphasis on motion. Once sufﬁcient gains in motion are made then a strengthening program is begun.

Case Example-Arthroscopic Wafer

A forty-ﬁve-year-old right-hand dominant male police ofﬁcer and avid golfer began having right-sided wrist pain about two months prior to presentation to the ofﬁce. There was no discrete injury to the wrist but the pain was ulna sided and bothered him with activities including golf. Radiographs revealed 2 mm of ulnar positive variance. Diagnosis of ulna impaction was made. He failed conservative therapy and eventually underwent arthroscopy. At the time of surgery a degenerative TFCC tear was identiﬁed and an arthroscopic wafer procedure with TFCC debridement was carried out. The patient returned to normal law enforcement activity and golf with no pain.

& COMPLICATIONS Complications from these surgeries are uncommon. In one large study of 211 wrist arthroscopies, the major complication was 0.9% and the minor complication rate was 4.3%. However, 58% of these patients underwent subsequent open procedures, so it is difﬁcult to conclude if the arthroscopy or the open procedure led to the complication. The most common complication was dorsal sensory ulnar nerve neuropraxia (16). The routine use of thermal ablation devices can be associated with burns or chondrolysis. Incomplete ulnar head resection leading to continued ulnar-sided pain is a technical error that can occur. Because the ulna head in an open resection comes out as one piece it can be judged to be completely removed.

& OUTCOMES Results from arthroscopic debridement of Palmer 1A TFCC are favorable. At average follow-up of three years 84% of patients have had relief of their symptoms (17). A study of patients combining degenerative and traumatic tears treated with debridement noted the traumatic tears did better. Patients that were ulna positive or had an associated LT ligament tear did worse

(18). A more recent study had similar results. At follow-up of two to six years, 77% of patients had good to excellent results. Interestingly 18 of the 35 patients had associated chondral lesions (19). Results from arthroscopic TFCC repair of Palmer 1B TFCC tears are also favorable. Satisfactory results of greater than 90% have been reported (20–22). Timing of the repair has also been examined. They theorized that delays over six months increased the incidence of degeneration of the TFCC. This was worse when there was an ulnar positive variant. Results when the repair was performed without six months demonstrated improvement in pain in all patients with 21 out of 24 achieving complete relief (23). More recent studies have conﬁrmed the previous data with 34 out of 37 patients having good to excellent results. In this study, grip strength was noted to have diminished to 72% of normal (24). Arthroscopic treatment of Palmer 1D tears is controversial. Because the radial side of the TFCC is avascular healing potential has been questioned. Good results with repair have been reported in the literature with 8 out of 13 patients returning to preinjury activity level. Postoperative studies including arthrogram, MRI, and arthroscopy demonstrated intact TFCC. This data clearly support the ability of the radial aspect of the TFCC to heal to the radius (23). Arthroscopic wafer procedure as treatment for ulnocarpal impaction has had success. At three to ﬁve years results have had good to excellent results in 75% of cases (24). Debridement of 3 mm of bone in a cadaveric study lowered pressures on the ulna side of the wrist by 10.8% (25). The arthroscopic techniques give similar results as the open wafer procedure without the need for postoperative immbolization (3). Excellent results from combined arthroscopic TFCC debridement and wafer procedure have been recently reported with all patients being satisﬁed with the results and an improvement in grip strength by 36% (26). Patients with ulnocarpal impaction and associated LT instability should be treated with ulna shortening osteotomy and not the wafer procedure. The shortening will tighten the ligaments on the ulnar side of the carpus. Without the LT instability, the arthroscopic procedure has the beneﬁt of no hardware complications and no risk of nonunion.

& SUMMARY Wrist arthroscopy is a minimally-invasive technique that has changed the way in which ulnar-sided wrist pain is treated. Pioneering work done on the anatomy, function, and injuries of the TFCC has been the stimulus to push the technology. As was true in the knee and the shoulder, the original use of the arthroscope was to assist in diagnosis. Treatments of the pathologies found were limited by the technology available. Surgeons pushed the advance of the instrumentation in the wrist which allowed for more treatment possibilities. There has been much advancement of the technology available for arthroscopy of the knee and the shoulder. The amount of new instrumentation in the wrist has lagged behind the changes in these other joints. One can envision a time in which repair techniques such as knotless anchors will be perfected in the wrist which would ease the repair of the radial-sided TFCC tear. Thermal devices for ablation and shrinkage are in their infancy and there future is unknown. Indications for arthroscopic treatment of TFCC are tears in the setting of: & & &

Ulna-sided wrist pain failing conservative treatment Ulna positive deformity leading to pain LT ligament intact.

Triangular Fibrocartilage Tears and Ulnocarpal Impaction & 245

Advantages of the arthroscopy over open procedures are: & & & &

Better visualization of the TFCC and associated chondral lesions Ease of repair of TFCC Less invasive for debridement of TFCC No risk of nonunion or hardware complication as in ulnar shortening.

& REFERENCES 1. Imbriglia JE, Bolan DS. Tears of the articular disc of the triangular ﬁbrocartilage complex: the results of excision of the articular disc. J Hand Surg [Am] 1983; 8:620. 2. Chun S, Palmer AK. The ulnar impaction syndrome: followup of ulnar shortening osteotomy. J Hand Surg [Am] 1993; 18:46–53. 3. Feldon P, Terrono AL, Belsky MR. Wafer distal ulna resection for triangular ﬁbrocartilage tears and/or ulna impaction syndrome. J Hand Surg [Am] 1992; 17:731–7. 4. Friedman SL, Palmer AK. The ulnar impaction syndrome. Hand Clin 1991; 7:295–310. 5. Hulsizer D, Weiss APC, Akelman E. Ulna-shortening osteotomy after failed arthroscopic debridement of the triangular ﬁbrocartilage complex. J Hand Surg [Am] 1997; 22:694–8. 6. Reagan DS, Linscheid RL, Dobyns JH. Lunotriquetral sprains. J Hand Surg [Am] 1984; 9:502–14. 7. Tomaino MM. The importance of the pronated grip x-ray view in evaluating ulnar variance. J Hand Surg [Am] 2000; 25:352–7. 8. Potter HG, Asnis-Ernberg L, Weiland AJ, et al. The utility of highresolution magnetic resonance imaging in the evaluation of the triangular ﬁbrocartilage complex of the wrist. J Bone Joint Surg [Am] 1997; 79:1675–84. 9. Blazer P, Chan P, Kneeland J, et al. The effect of observer experience on magnetic resonance imaging interpretation and localization of triangular ﬁbrocartilage complex lesions. J Hand Surg [Am] 2001; 26:742–74. 10. Palmer AK. Triangular ﬁbrocartilage complex lesions: a classiﬁcation. J Hand Surg [Am] 1989; 14:594–606. 11. Shih JT, Lee HM, Tan CM. Early isolated triangular ﬁbrocartilage complex tears: management by arthroscopic repair. J Trauma 2002; 53:922–7. 12. Blackwell R, Jemison M, Fay B. The holmium:yttrium–aluminumgarnet laser in wrist arthroscopy: a ﬁve-year experience in the treatment of central triangular ﬁbrocartilage tears by partial excision. J Hand Surg [Am] 2001; 26:77–86. 13. Palmer AK, Werner FW, Glisson RR, et al. Partial excision of the triangular ﬁbrocartilage complex. J Hand Surg [Am] 1988; 13:391–4.

14. Hermansdorfer JD, Kleinman WB. Management of chronic peripheral tears of the triangular ﬁbrocartilage complex. J Hand Surg [Am] 1991; 16:340–6. 15. Sagerman SD, Short W. Arthroscopic repair of radial-sided triangular ﬁbrocartilage complex tears. Arthroscopy 1996; 12:339–42. 16. Beredjiklian PK, Bozentka DJ, Leung L, et al. Complications of wrist arthroscopy. J Hand Surg [Am] 2004; 29:406–11. 17. Osterman AL. Arthroscopic de´bridement of triangular ﬁbrocartilage complex tears. Arthroscopy 1990; 6:120–4. 18. Minami A, Ishikawa J, Suenaga N, et al. Clinical results of treatment of triangular ﬁbrocartilage complex tears by arthroscopic debridement. J Hand Surg [Am] 1996; 21:406–11. 19. Husby T, Haugstvedt TR. Long-term results after arthroscopic resection of lesions of the triangular ﬁbrocartilage complex. Scand J Plast Reconstr Surg Hand Surg 2001; 35:79–83. 20. Bednar JM. Arthroscopic treatment of triangular ﬁbrocartilage complex tears. Hand Clin 1999; 15:479–88. 21. Corso SJ, Savoie FH, Geissler WB, et al. Arthroscopic repair of peripheral avulsions of the triangular ﬁbrocartilage complex of the wrist: a multicenter study. Arthroscopy 1997; 13:78–84. 22. De Araujo W, Poehling GG, Kuzma GR, et al. New Tuohy needle technique for triangular ﬁbrocartilage complex repair: preliminary studies. Arthroscopy 1996; 12:699–703. 23. Trumble TE, Gilbert M, Vedder N. Isolated tears of the triangular ﬁbrocartilage complex: management by early arthroscopic repair. J Hand Surg [Am] 1997; 22:57–65. 24. Nagle DJ. Arthroscopic treatment of degenerative tears of the triangular ﬁbrocartilage. Hand Clin 1994; 10:615–24. 25. Wnorowski DC, Palmer AK, Werner FW. Anatomic and biomechanical analysis of the arthroscopic wafer procedure. Arthroscopy 1992; 8:204–12. 26. Tomaino MM, Weiser RW. Combined arthroscopic TFCC debridement and wafer resection of the distal ulna in wrists with triangular ﬁbrocartilage complex tears and positive ulnar variance. J Hand Surg [Am] 2001; 26:1047–52. 27. Constantine KJ, Tomaino MM, Herndon JH, et al. Comparison of ulnar shortening osteotomy and the wafer resection procedure as treatment for ulnar impaction syndrome. J Hand Surg [Am] 2000; 25:55–60. 28. Dailey S, Palmer A. The role of arthroscopy in the evaluation and treatment of triangular ﬁbrocartilage complex injuries in athletes. Hand Clin 2000; 16:461–74. 29. Palmer AK. Triangular ﬁbrocartilage disorders: injury patterns and treatment. Arthroscopy 1990; 6:125–32. 30. Thiru-Pathi RG, Ferlic DC, Clayton ML, et al. Arterial anatomy of the triangular ﬁbrocartilage of the wrist and its surgical signiﬁcance. J Hand Surg [Am] 1986; 11:258–63.

31 Minimally Invasive Treatment of Arthritis Associated with Scapholunate and Scaphoid Nonunion Advanced Collapse Charles M. Jobin, Steven H. Goldberg, and Robert J. Strauch

Department of Orthopedic Surgery, Columbia University Medical Center, New York, New York, U.S.A.

& INTRODUCTION Scapholunate advanced collapse (SLAC) is a progressive pattern of arthritis that develops in the setting of a chronic scapholunate ligament tear. This ligamentous injury leads to abnormal carpal alignment, altered force transmission, and increased focal joint contact (1–3). Scapholunate instability is characterized radiographically by scapholunate joint widening, extension of the lunate, palmarﬂexion of the scaphoid, and capitate proximal and dorsal translation (4–6). In the normal wrist, pressure or load across the carpus is unevenly distributed and dependent on both the position of the wrist and on the direction of motion (7). One study demonstrated that with progressive scapholunate instability, contact area and pressure is concentrated at the radioscaphoid rather than the radiolunate joint (1,2). However, others found that with scapholunate ligament sectioning, the radiocarpal pressure shifts from the radioscaphoid to the radiolunate fossa (8). Additionally, scaphoid palmarﬂexion causes a decreased radioscaphoid contact area and changes contact to the dorsal lip of the radius (9). The greatest carpal shear forces lie between the distal radius and scaphoid and between the proximal capitate and the distal lunate. The above changes in carpal bone rotation and translation, force concentration, and contact area explain the radioscaphoid and lunocapitate arthritis (5,10,11). SLAC wrist is classiﬁed into several stages that assists in determining which surgical intervention can alleviate symptoms (10). Stage I arthritis is limited to the radial styloid and scaphoid waist articulation with pointing of the styloid (Figs. 1 and 2) and joint space narrowing. Stage II arthritis advances proximally to involve the complete distal radius scaphoid fossa and scaphoid articular surfaces due to continued, chronic overload of this portion of the carpus (Fig. 3). In stage III midcarpal arthritis develops at the capitolunate joint from axial proximal collapse of the capitate between the dissociated scaphoid and lunate bones (Fig. 4). The proximal lunate articular surface and lunate facet of the distal radius have a concentric spherical articulation. Thus, the extended lunate in SLAC wrists does not result in abnormal shear forces at the radiolunate articulation, causing this joint to be spared from the arthritic process (10,12). Scaphoid nonunion advanced collapse (SNAC) is a similar, but distinct, pattern of progressive arthritis with a comparable natural history and treatment options. Similar to SLAC wrists, pathologic carpal bone rotation occurs in SNAC wrists, particularly lunate extension. The nonunion site undergoes bone resorption and cystic changes in most patients after 18 months allowing the distal scaphoid fragment to translate proximally and contact the radial styloid (13). The distal scaphoid pole rotates and develops abnormal motion through its intact ligaments to the distal carpal row. This leads to radioscaphoid

arthritis approximately ﬁve years after injury, which develops in all patients by 10 to 20 years (14,15). However, the proximal radioscaphoid joint is spared since the proximal pole has more normal kinematics through its continuity to the proximal row through the intact scapholunate ligament (13). Eventually, the distal pole rotation and radial styloid-scaphoid joint space narrowing allow proximal and radial migration of the capitate which causes scaphocapitate and capitolunate arthritis (13). This advanced arthritis typically develops after 20 years and is present in most patients 30 years after injury. The magnitude and a more diffuse pattern of arthritis correlate with increased scaphoid displacement and carpal malalignment (14,15). Many patients with SLAC or SNAC wrists may have minimal symptoms for many years (16) and therefore operative intervention should be reserved for those patients with signiﬁcant pain. The choice of surgical procedure is primarily dictated by the location and extent of the arthritis. Operative choices include arthroscopic debridement, radial styloidectomy (17), excision of the distal scaphoid pole for nonunion (18), proximal row carpectomy (19), limited intercarpal arthrodesis with scaphoid excision (10,19), total wrist arthrodesis (12), and total wrist arthroplasty. However, this chapter will focus on minimally invasive treatments for patients with early SLAC or SNAC wrist. Cases with stage III or diffuse arthritis require more extensive open procedures.

& RADIAL STYLOIDECTOMY & Indications/Contraindications Radial styloidectomy involves minimal surgery, immobilization, and rehabilitation, and eliminates the painful impingement between the distal scaphoid and the radial styloid in stage I SLAC or early SNAC wrist (17,20). It can be performed alone or in combination with other procedures (18). Additionally, styloidectomy may be performed at the time of procedures designed to treat scapholunate dissociation (21,22). Styloidectomy alone is contraindicated in stage II or III SLAC wrist since the arthritis extends proximal to the styloid.

& Considerations for Preoperative Planning Similar preoperative planning with respect to physical and radiographic examination is applicable for all the techniques in this chapter and will be described in detail in this section with speciﬁc points highlighted in subsequent sections. Patients must be counseled that styloidectomy or the other procedures may alleviate current symptoms, but they do not restore normal carpal kinematics or alter the natural history of progressive arthritis. Thus, patients may develop recurrent symptoms and

248 & Jobin et al.

1

1 2

FIGURE 1 Posteroanterior radiograph demonstrating the beginning of radial styloid pointing (1) without radioscaphoid joint space narrowing. This indicates early stage I scapholunate advanced collapse wrist arthritis. Normal carpal alignment is present.

they may require additional surgery. Therefore, careful patient selection is crucial. Since isolated styloidectomy treats the painful radial wrist pain but does not address the chronic scapholunate instability, it is usually recommended in older

FIGURE 2 Chronic scapholunate instability is evident with a stress ulnar deviation, posteroanterior radiograph.

FIGURE 3 Posteroanterior clenched ﬁst radiograph showing styloid pointing (1) and joint space narrowing at the radial styloid-scaphoid (2) and radial fossa-proximal scaphoid articulations. Note the widened scapholunate interval and preservation of the capitolunate joint space, making this stage II scapholunate advanced collapse wrist arthritis.

patients, patients with low-demands on wrist loading, patients with radial wrist pain during activities of daily living, and patients who do not wish to undergo more extensive rehabilitation and immobilization. It is not recommended as the deﬁnitive intervention in a young, athletic person who is likely to develop recurrent or progressive symptoms from repetitive loading of an untreated scapholunate injury. Prior to performing styloidectomy, careful questioning and physical examination are critical to determine if the patient has focal radial wrist pain over the radial styloid and snuffbox area, or whether diffuse symptoms are present. Patients with focal symptoms may be candidates for an isolated open or arthroscopic styloidectomy. Patients who have diffuse wrist pain may have continued symptoms after styloidectomy alone. Usually X-rays are the only imaging study needed prior to surgery. Routine radiographs include posteroanterior in neutral rotation, lateral, and oblique views. The presence of joint space narrowing should be speciﬁcally noted at the radial styloid-scaphoid waist, radial fossa-scaphoid proximal pole, and capitolunate articulations. Because joint space width can vary with wrist position, it is often useful to obtain bilateral wrist radiographs on the same ﬁlm cassette to assess for asymmetry. The radiographs should conﬁrm that arthritis appears to be limited to the radial styloid and scaphoid waist. A posteroanterior radiograph in radial deviation may help illustrate the point of maximal styloid-scaphoid contact. Please refer to chapter 15 “RASL reconstruction for scapholunate instability” for a detailed description of radiographic abnormalities in scapholunate tears.

Minimal Invasive Treatment of SLAC/SNAC & 249

1 3

2

the capsule to prevent cutaneous nerve or tendon injury and the capsule is penetrated in a controlled manner. A 2.7 mm arthroscope is placed through the portal and the radiocarpal compartment is visualized. An 18-gauge needle is placed in the 6U portal, which is located ulnar to the extensor carpi ulnaris, to allow outﬂow. Additionally, midcarpal arthroscopy should be performed using the radial midcarpal portal, 1 cm distal to the 3–4 portal to evaluate for capitolunate arthritis. If no extensive midcarpal or radiocarpal arthritis is identiﬁed, the 1–2 portal is established between the extensor pollicis brevis and extensor carpi radialis tendons and a covered bur ranging in size from 2.9 to 4.0 mm is inserted. Alternatively the arthroscope may be placed in the 4–5 portal between the extensor digitorum communis and extensor digiti minimi with the bur placed through the 3–4 portal. Radiocarpal synovectomy should be performed to allow thorough observation of the radial styloid and volar ligaments. The amount of styloid removed should not be more than 4mm from the tip of the styloid and the width of the bur may be used as a reference. Post operatively patients should be placed in a volar short arm splint for 10 to 14 days after which sutures are removed. Gentle wrist motion is encouraged with restriction from vigorous activity for six weeks.

& Complications

However, since radiographic ﬁndings often underestimate the degree of articular cartilage injury and since SLAC wrist arthritis is secondary to other ligamentous carpal injuries, we recommend wrist arthroscopy be performed prior to styloidectomy, even if an open styloidectomy is planned in order to thoroughly evaluate the radiocarpal and midcarpal joints. If the arthritic changes are isolated to the radial styloid-scaphoid articulation, then the surgeon can proceed with styloidectomy. Additionally, debridement of inﬂamed synovium can eliminate synovitis and relieve diffuse dorsal wrist pain. Synovial debridement also removes redundant tissue that can eliminate pain emanating from mechanical impingement. Unstable ﬂaps of a torn scapholunate ligament should also be debrided (23,24).

Arthroscopic styloidectomy may have less morbidity than open techniques as it avoids the need to identify and retract the dorsal sensory branches of the radial nerve and involves less capsular dissection. Failure to remove sufﬁcient bone from the styloid may lead to persistent radiocarpal pain and loss of motion. Careful analysis of preoperative radiographs with measurement of the location of radioscaphoid impingement with respect to the styloid tip facilitates the determination of the amount of bone resection necessary to adequately decompress the joint. Additionally, arthroscopic visualization and intraoperative ﬂuoroscopy provide a dynamic assessment of elimination of impingement. Alternatively, excessive resection must be avoided. Yao and Osterman (17) postulate that arthroscopic procedures may prevent excessive resection due to visualization of the styloid and volar ligaments during resection. Removal of styloid beyond 4 mm has a risk of sacriﬁcing the radioscaphocapitate, dorsal radiocarpal, and long radiolunate ligaments which are integral in supporting the carpus and preventing ulnar and volar translocation (25,26). The distal radial and carpal articular surfaces should be protected from iatrogenic damage during the procedure. The comparison of complications following open versus arthroscopic styloidectomy has not been speciﬁcally studied.

& Surgical Technique

& Outcomes

The patient is placed supine on the operating room table with the arm on an arm board and a sterile tourniquet is applied. The hand is suspended from a traction tower device with the index and middle ﬁngers placed in ﬁnger traps under 10 to 15 pounds of traction. The radiocarpal joint is insufﬂated with normal saline to distend the joint. This protects the articular surface during portal establishment by moving the capsule away from the articular surface. During injection extravasation of ﬂuid into the distal radioulnar joint or extensor carpi ulnaris sheath suggests a triangular ﬁbrocartilage complex tear. A longitudinal incision is made just through the skin at the 3–4 portal, a soft spot distal and ulnar to Lister’s tubercle between the extensor pollicis longus and extensor digitorum communis compartments. A ﬁne, curved hemostat is used to bluntly spread down to

The superiority of arthroscopy over open styloidectomy has not been shown with regard to functional outcome or rate of complications. There are very few reports on the outcome of isolated radial styloidectomy in the treatment of SLAC wrist. A report of isolated open styloidectomy for scaphoid nonunion was made with satisfactory pain relief in 10 out of 13 patients (20). Excellent or good results were reported in ﬁve out of eight patients with scaphoid nonunion at 11 months follow-up after open styloidectomy (27). Arthroscopic and open radial styloidectomy were discussed in relation to SLAC wrist in a study by Yao and Osterman (17), but clinical results were not mentioned. A case series of three patients who underwent arthroscopic styloidectomy and distal scaphoid excision was more recently described (18). At two year follow-up all patients were highly

FIGURE 4 Posteroanterior clenched ﬁst radiograph showing styloid pointing (1) and diffuse radioscaphoid arthritis (2) with involvement of the capitolunate joint (3) indicating stage III scapholunate advanced collapse wrist arthritis.

250 & Jobin et al.

satisﬁed, had pain relief, complete relief of mechanical symptoms (catching, popping), improvement of the Modiﬁed Mayo Wrist Scores from 60 to 88, improved grip strength from 73% to 87% of the contralateral hand, improved range of motion and no radiographic joint degeneration. No immobilization was necessary and patients returned to work within two weeks on light duty and four weeks for full duty.

& DISTAL SCAPHOID EXCISION & Indications/Contraindications Chronic scaphoid nonunion can be treated with excision of the distal scaphoid pole when radiographic changes are consistent with early SNAC wrist conﬁned to the articulations between the scaphoid distal pole and the radial styloid and radial surface of the capitate (28,29). Distal pole scaphoidectomy is contraindicated in more advanced SNAC wrist in which the capitolunate or proximal radioscaphoid joint is involved. One author described excision of the radial styloid in combination with distal pole excision (18). In cases of SNAC wrist where the nonunion site is proximal to the scaphoid waist on a posteroanterior radiograph in ulnar deviation creating small proximal and large distal pole fragments, we believe these injuries are best treated by measures other than distal pole resection.

of the 2.9 mm bur through the more radial 1–2 portal facilitates removal of the radial styloid. Sequential synovectomy and styloidectomy further opens the radiocarpal joint improving access to the distal pole of the scaphoid. This may also permit upsizing the bur to a 3.5 mm diameter which increases the efﬁciency of bone removal and decreases the frequency of instrument and line clogging by bone fragments. In an effort to improve working angles, attention should be paid to not removing more than 4 mm of the arthritic styloid to preserve the dorsal and palmar ligaments. The amount of resection can be judged based on the known bur diameter and marking the styloid articular surface 4 mm proximal to the tip at the initiation of styloidectomy. Finally, the distal scaphoid can be removed through the previously established portals, switching instrument, and arthroscope location as necessary. Adequate resection of the styloid and distal pole should be conﬁrmed with intraoperative ﬂuoroscopy.

& Complications Carpal instability could occur if extrinsic or intrinsic carpal ligaments are injured during bone resection. Articular cartilage or radial artery injury could also occur during the removal of the distal scaphoid pole.

& Considerations for Preoperative Planning

& Outcomes

Despite treatment of scaphoid nonunions with vascularized or nonvascularized bone grafting stabilization and internal ﬁxation (30–32), success is not guaranteed and postoperative immobilization is often necessary for a prolonged time. Patients may not wish to undergo multiple attempts to achieve scaphoid union and once arthritis has developed, union alone may not alleviate all symptoms. Thus, in patients with SNAC wrist and who have primarily radial wrist pain worsening in radial deviation, distal scaphoid pole excision can be performed. This is minimally invasive with a rapid rehabilitation making it a useful option for low demand individuals or individuals who cannot tolerate prolonged immobilization and lifting restrictions due to work or personal obligations. Preoperatively alternative treatment options should be discussed with the patient in the event that diffuse arthritis is found at the time of arthroscopy.

In the largest series of open distal scaphoid resection, 19 patients were followed an average of 49 months (28). Flexion and extension arc improved from 498 to 928. The radial and ulnar deviation arc improved from 238 to 418. Postoperative grip strength improved to 75% of the opposite side. No radiographic carpal collapse was noted. Thirteen patients had complete pain relief and all but one returned to their prior job. In another series of open distal scaphoid excision four of the nine patients had no wrist pain and the remaining ﬁve patients had only mild pain with strenuous activity after surgery (29). The wrist range of motion improved from 708 to 1408 (94% of the opposite wrist) and grip strength improved to 77% of the opposite wrist. There was no observed radiographic progression of arthritis in eight patients. The series of three patients who underwent arthroscopic styloidectomy and distal pole excision had good outcomes (see previous section for details) (18).

& Surgical Technique Standard wrist arthroscopy positioning and equipment is used as described in the previous section. The arthroscope is placed in the more ulnar 4–5 or 6R portal (radial to the extensor carpi ulnaris tendon) to gain wider perspective of the proximal scaphoid and distal radius scaphoid fossa articular surfaces (18). The midcarpal joint should also be examined. During the diagnostic arthroscopy it is often helpful to perform a thorough radial-sided synovectomy with debridement of any unstable chondral or ligamentous ﬂaps of tissue using a 2.9 mm fullradius resector to establish a larger unobstructed ﬁeld of view and working space in the region of the radioscaphoid joint and scaphoid nonunion site. Synovectomy allows enhanced visualization of the palmar radiocarpal ligaments that must be preserved to prevent postoperative ulnar carpal translocation. Depending on the patient’s unique anatomy such as radial height and inclination, the arthroscope and bur can be alternately switched between multiple portals to improve visualization and working angles that permit styloidectomy and scaphoid excision without inducing new iatrogenic chondral injury. With the arthroscope in the 3–4 portal, insertion

& PROXIMAL ROW CARPECTOMY & Indications/Contraindications Proximal row carpectomy (PRC) is a motion-sparing surgical procedure converting an unstable, painful SLAC or SNAC wrist into a simple hinge joint by removing the scaphoid, lunate and triquetrum and allowing the capitate to articulate with the lunate fossa of the distal radius. PRC is primarily indicated in chronic scapholunate ligament disruption with stage I or II arthritis and SNAC wrist conﬁned to the radioscaphoid joint. PRC is contraindicated in patients with degenerative changes on the lunate fossa of the distal radius, and inﬂammatory arthropathy which has a high failure rate because of progressive pancarpal arthritis (33). Loss of cartilage of the proximal capitate head can be a contraindication as well (SLAC stage III). However, PRC with proximal capitate resection and/or soft tissue interposition resulted in a good outcome in several patients with lunocapitate or radiolunate disease, which may slightly expand the indications for PRC (34,35). Others report that capitate focal chondral defects up to 3 mm are

Minimal Invasive Treatment of SLAC/SNAC & 251

amenable to PRC (33,36). If there is any question about the severity of capitate cartilage wear, an alternative procedure such as scaphoid excision and four corner fusion (lunate-triquetrum-capitate-hamate) should be considered. A relative contraindication is an active patient less than 35 years of age (37).

& Considerations for Preoperative Planning Since PRC is performed in patients with more advanced disease, physical examination should conﬁrm diffuse, rather than focal wrist pain and radiographs should reveal diffuse radioscaphoid arthritis without signiﬁcant capitolunate arthritis.

& Arthroscopic Proximal Row Carpectomy Technique Through standard radiocarpal and midcarpal portals, a PRC can be achieved (38,39). Use of a tourniquet and a mechanical infusion system establishes a clear visual ﬁeld. The arthroscope is initially placed in the 3–4 portal to systematically examine the radiocarpal joint. If there is no signiﬁcant radial-lunate fossa arthritis, the radial midcarpal portal is established and the arthroscope is introduced to conﬁrm the absence of signiﬁcant capitate arthritis. The arthroscope is then replaced in the 3–4 portal and a shaver is placed through the 4–5, 6U, and/or 6R portals depending on patient anatomy and surgeon preference and the scapholunate and lunotriquetral ligaments are removed. Then the center of the lunate is removed with a 2.9 or 3.5 mm bur. In order to protect the proximal capitate, the distal lunate is not resected with the bur, but rather a pituitary rongeur is used to carefully remove the remaining lunate shell. An assistant stabilizes the traction tower with one hand and places the other hand on the palmar wrist to apply palmar to dorsal counterpressure. The arthroscope and a small osteotome can be alternately switched between the previously established radiocarpal portals to fragment the scaphoid and triquetrum. The scaphoid and triquetral fragments can then be removed with a bur and pituitary rongeur. Occasionally, an anterior radiocarpal portal is useful to visualize the dorsal carpal bones. It is established by placing a switching stick through the 3–4 portal and between the radioscaphocapitate and long radiolunate ligaments (40). Then a volar incision is made over the switching stick and the ﬂexor carpi radialis is retracted. The arthroscopic cannula is placed over the switching stick, the stick is removed, and the arthroscope is introduced into the cannula. Care must be taken to avoid injuring the volar capsule or radiocarpal ligaments. Digital motion is encouraged immediately after surgery. The ﬁrst dressing change is performed at 10 or 14 days to remove the sutures. The wrist remains immobilized in a splint for three to four weeks to allow ligamentous and capsular healing. Then occupational therapy for wrist range of motion is initiated. A removable neutral wrist splint is continued when not in therapy. After six weeks no immobilization is needed and at eight weeks a strengthening program is initiated. By three months postoperatively, the patient may return to full unrestricted activities.

& Complications Complications of proximal row carpectomy are relatively infrequent. During either open or arthroscopic approaches injury to the dorsal sensory branches of the radial or ulnar nerve can occur. Iatrogenic damage to the articular surface of the proximal capitate or the lunate fossa of the distal radius could occur during carpectomy. Damage to volar radiocarpal ligaments

during carpectomy can result in unrestrained ulnar translation of the carpus. Recognized ligament injury should be primarily repaired with suture or bone anchors depending on the location of injury. Finger weakness theoretically could occur from loss of carpal height leading to laxity of extrinsic tendons. Relative incongruity between the capitate head and lunate fossa could result in capitate changes, which has been reported in two studies in 6 out of 20 and 14 out of 17 patients an average of 13 years after open surgery (36,37). Both groups found radiocapitate joint space narrowing to be often asymptomatic in these patients. Complications from the arthroscopic technique have not been well-studied and the risk-beneﬁt proﬁle of arthroscopic versus open PRC is unknown.

& Outcomes Only two studies describing arthroscopic PRC could be found. Culp et al. (39) reported a qualitative description of seven patients who all experienced pain relief, good grip strength, and a functional range of motion. However, the authors did not state length of follow-up, preoperative symptoms and physical exam ﬁndings, or quantify postoperative parameters such as pain relief, grip strength, or range of motion. No validated outcome measures were used. Roth and Poehling also described a single patient in which arthroscopic PRC was performed, but did not state the postoperative outcome (38). Thus, further studies documenting the safety and efﬁcacy of arthroscopic PRC are needed before routine use can be recommended.

& Open Proximal Row Carpectomy Technique Since open PRC is a much more commonly performed procedure than the recently described arthroscopic method and has been proven effective over the past four decades (41), we will brieﬂy discuss the open approach. We believe the open approach is a minimally invasive technique since long-term immobilization is not necessary and careful preservation of the nerves, tendon, capsule, and ligaments is performed. Either regional or general anesthesia is used with the patient placed supine and the affected arm abducted 908 on a hand table. Under tourniquet control a transverse incision is made centered over the proximal carpal row, providing excellent exposure with a cosmetic scar (Fig. 5). Dissection is carried down to the extensor retinaculum (Fig. 6) with care taken to protect the sensory branches of the radial and ulnar nerves. The extensor pollicis longus (EPL) tendon is retracted radially out of the opened third dorsal compartment. The extensor carpi radialis brevis (ECRB) is also then identiﬁed and retracted radially and the fourth compartment tendons are retracted ulnarly. The posterior interosseous nerve is identiﬁed and a 1-cm segment is resected. The dorsal capsule is longitudinally incised parallel to the ECRB. Staying within the subperiosteal plane, to avoid entering the dorsal compartments, the dorsal capsule is elevated (Fig. 7). The integrity of the articular surfaces of the head of the capitate and the lunate facet of the distal radius are inspected for chondromalacia. If signiﬁcant eburnation is found on the capitate head, PRC should be abandoned and either a total wrist fusion or scaphoidectomy with four corner fusion performed. There are various techniques for excision of the scaphoid, lunate, and triquetrum. The scaphoid can be removed ﬁrst by sharply dividing any remaining ﬁbers of the scapholunate interosseous ligament and then inserting a Steinmann pin into the scaphoid to use as a joystick (Fig. 8). The scaphoid is removed intact by sharply reﬂecting the volar capsular and ligamentous attachments to the scaphoid, although the distal

252 & Jobin et al.

FIGURE 6 Dissection is carried down to the extensor retinaculum (horizontal ﬁbers) with care taken to protect the sensory branches of the radial and ulnar nerves.

FIGURE 5 A dorsal horizontal incision, 4 to 5 cm in length, is made centered over the proximal carpal row. Lister’s tubercle (L) is marked.

scaphoid tubercle need not be completely removed in order to preserve distal ligaments (Fig. 9). The lunate and triquetrum may be removed en-bloc or piecemeal, often with a joystick to rotate the bones to facilitate removal of the investing ligaments. After the proximal row carpal bones are removed, the capitate settles into the lunate fossa of the distal radius. The capsule is closed with interrupted sutures after which orthogonal radiographs are taken to ensure that all of the proximal carpal-row bones are removed, and that the head of the capitate is seated in the lunate fossa of the distal radius (Figs. 10–12). The EPL is left out of the third dorsal compartment and the retinaculum is approximated with a 3–0 absorbable suture. The skin is closed in standard fashion. A volar plaster splint is applied. Postoperative immobilization and rehabilitation are similar to the arthroscopic technique described above.

& Open Proximal Row Carpectomy Outcomes Two well designed studies analyzed the long-term clinical and radiographic results in a total of 42 patients an average of 13 years after open PRC (36,37). The wrists had an average ﬂexion-extension arc of 728 and 778 and an average grip strength of 83% to 91% of the contralateral side. Fourteen out of 18 and 17 out of 20 patients were satisﬁed. Radiographs revealed radiocapitate joint space narrowing, but there was no signiﬁcant association between loss of joint space and subjective or objective function. There were four failures (18%) in patients under 35 years of age, in one of the studies that required fusion at an average of seven years after PRC (37). A summary of long-term outcomes after proximal row carpectomy is reported (Table 1).

FIGURE 7 The tendons of the extensor digitorum communis are retracted ulnarly and the extensor pollicis longus and radial wrist extensors are retracted radially to expose the dorsal capsule that has been incised vertically. Radial and ulnar capsular ﬂaps have been elevated and retracted, exposing the carpal bones. If the proximal pole of the capitate has no or minimal chondromalacia, proximal row carpectomy is initiated by sectioning the lunotriquetral (scalpel) and scapholunate ligaments to facilitate mobilization of the proximal carpal bones.

Minimal Invasive Treatment of SLAC/SNAC & 253

FIGURE 8 Kirschner wires are inserted into the scaphoid and lunate to be used as joysticks to facilitate carpal bone rotation, permitting direct visualization during careful reﬂection of the capsuloligamentous attachments.

FIGURE 10 Intraoperative ﬂuoroscopic posteroanterior image of the completed proximal row carpectomy.

FIGURE 9 The Kirschner wire is placed percutaneously just distal to the level of the radial styloid to illustrate the location of the RSC ligament. After proximal row carpectomy has been completed, the intact RSC ligament (suture) is important to preserve carpal stability. Abbreviation: RSC, radioscaphocapitate.

FIGURE 11 Follow up posteroanterior radiograph six months after proximal row carpectomy in a 34-year-old man who developed Kienbock’s disease with a fractured, collapsed lunate with avascular necrosis.

254 & Jobin et al.

minimally invasive techniques and delineates their indications, outcomes, and complications. These are summarized below:

& Arthroscopic or Open Radial Styloidectomy

Indications & &

Limited radial styloid and scaphoid arthritis in SLAC or early SNAC wrist No midcarpal arthritis (capitolunate arthritis)

Outcomes &

Limited reports of open or arthroscopic isolated styloidectomy, but short-term pain relief seems good and length of improvement is unclear

Complications & &

Excessive resection: Ulnar carpal translation with radioscaphocapitate ligament injury Too little resection: recurrent symptoms

& Distal Scaphoid Excision

Indications &

Early radial styloid-scaphoid, radial-capitate arthritis after scaphoid nonunion

Outcomes &

Limited reports of open and arthroscopic distal scaphoid excision with good pain relief and improved range of motion and grip strength

FIGURE 12 Five month follow-up lateral radiograph of the same patient in Figure 11 with proper coronal alignment of the new radiocapital articulation. The patient had 90% wrist extension and 50% wrist ﬂexion in the operated hand compared to the unaffected hand.

&

& SUMMATION POINTS

& Proximal Row Carpectomy

SLAC and SNAC wrists occur years after chronic wrist injuries. Based on careful preoperative assessment and discussion with the patient about the natural history of the disorder and their activity level and goals, individualized treatment plans can be established. Future studies are needed to formally compare arthroscopic and open approaches in order to directly compare safety and efﬁcacy. This chapter describes several

Indications

Complications

&

Risk of injury to radial artery, carpal ligaments, or articular surface during resection

More extensive radioscaphoid arthritis with minimal to no arthritis at the capitolunate joint

Outcomes &

Two case series with a total of eight patients undergoing arthroscopic PRC showing relief of pain

TABLE 1 Open Proximal Row Carpectomy Long-Term Outcomes Proximal row carpectomy Culp (42) Green (43) Imbriglia (33) Tomiano (44) Wyrick (45) Baumeister (46) Jebson (36) Didonna (37) Krakauer (12) Cohen (19) Nevaiser (47) Overall study data a b

No. of wrists

Follow-up (years)

Flexion (degree)

Extension (degree)

Radial deviation (degree)

Ulnar deviation (degree)

Grip strength (%) contralateral wrist

Failures requiring salvage arthodesis

17 15 27 23 11 30 18 18 12 19 22 212

3.5 2.5 4.0 6.0 3.0 2.3 13.1 13.2 3.3 1.5 3.0b 5.0

28 40 42a 37 47 38 36 36 33 36 38 37

35 39 42a 37 38 37 40 36 39 45 45 39

9 5 —a 8 4 10 12 9 14 7 5 8

23 31 23 19 27 23 22 31 18 24 30 24

67 64 80 79 94 50 83 91 66 71 100 76

2 of 17 2 of 15 1 of 27 1 of 24 0 of 11 1 of 23 2 of 20 4 of 22 2 of 12 1 of 19 2 of 24 18 of 212 (8.5%)

Average ﬂexion/extension arc reported as 848, radial deviation not reported. Follow-up reported as a range from 3 to 10 years with no average follow up reported.

Minimal Invasive Treatment of SLAC/SNAC & 255 &

Many open series with long-term follow-up indicate excellent results

Complications &

Potential for injury to carpal ligaments leading to instability and radiocapitate arthritis or damage to the radiocapitate joint during carpectomy

& REFERENCES 1. Viegas SF, Tencer AF, Cantrell J, et al. Load transfer characteristics of the wrist. Part II. Perilunate instability. J Hand Surg [Am] 1987; 12(6):978–85. 2. Viegas SF, Tencer AF, Cantrell J, et al. Load transfer characteristics of the wrist. Part I. The normal joint. J Hand Surg [Am] 1987; 12(6):971–8. 3. Hastings DE, Silver RL. Intercarpal arthrodesis in the management of chronic carpal instability after trauma. J Hand Surg [Am] 1984; 9(6):834–40. 4. Meade TD, Schneider LH, Cherry K. Radiographic analysis of selective ligament sectioning at the carpal scaphoid: a cadaver study. J Hand Surg [Am] 1990; 15(6):855–62. 5. Linscheid RL, Dobyns JH. Treatment of scapholunate dissociation. Rotatory subluxation of the scaphoid. Hand Clin 1992; 8(4):645–52. 6. Baratz ME, Dunn MJ. Ligament injuries and instability of the carpus: scapholunate joint. In: Berger RA, Weiss AP, eds. Hand Surgery. Philadelphia, PA: Lippincott Williams and Wilkins, 2004:481–94. 7. Short WH, Werner FW, Fortino MD, et al. Analysis of the kinematics of the scaphoid and lunate in the intact wrist joint. Hand Clin 1997; 13(1):93–108. 8. Blevens AD, Light TR, Jablonsky WS, et al. Radiocarpal articular contact characteristics with scaphoid instability. J Hand Surg [Am] 1989; 14(5):781–90. 9. Burgess RC. The effect of rotatory subluxation of the scaphoid on radio-scaphoid contact. J Hand Surg [Am] 1987; 12(5 Pt 1):771–4. 10. Watson HK, Ballet FL. The SLAC wrist: scapholunate advanced collapse pattern of degenerative arthritis. J Hand Surg [Am] 1984; 9(3):358–65. 11. Watson HK, Weinzweig J, Zeppieri J. The natural progression of scaphoid instability. Hand Clin 1997; 13(1):39–49. 12. Krakauer JD, Bishop AT, Cooney WP. Surgical treatment of scapholunate advanced collapse. J Hand Surg [Am] 1994; 19(5):751–9. 13. Vender MI, Watson HK, Wiener BD, et al. Degenerative change in symptomatic scaphoid nonunion. J Hand Surg [Am] 1987; 12(4):514–9. 14. Mack GR, Bosse MJ, Gelberman RH, et al. The natural history of scaphoid non-union. J Bone Joint Surg Am 1984; 66(4):504–9. 15. Ruby LK, Stinson J, Belsky MR. The natural history of scaphoid non-union. A review of ﬁfty-ﬁve cases. J Bone Joint Surg Am 1985; 67(3):428–32. 16. Fassler PR, Stern PJ, Kiefhaber TR. Asymptomatic SLAC wrist: does it exist? J Hand Surg [Am] 1993; 18(4):682–6. 17. Yao J, Osterman AL. Arthroscopic techniques for wrist arthritis (radial styloidectomy and proximal pole hamate excisions). Hand Clin 2005; 21(4):519–26. 18. Ruch DS, Chang DS, Poehling GG. The arthroscopic treatment of avascular necrosis of the proximal pole following scaphoid nonunion. Arthroscopy 1998; 14(7):747–52. 19. Cohen MS, Kozin SH. Degenerative arthritis of the wrist: Proximal row carpectomy versus scaphoid excision and four-corner arthrodesis. J Hand Surg [Am] 2001; 26(1):94–104. 20. Smith L, Friedman B. Treatment of ununited fracture of the carpal navicular by styloidectomy of the radius. J Bone Joint Surg Am 1956; 38-A(2):368–76. 21. Kleinman WB, Carroll C, IV. Scapho-trapezio-trapezoid arthrodesis for treatment of chronic static and dynamic scapho-lunate instability: a 10-year perspective on pitfalls and complications. J Hand Surg [Am] 1990; 15(3):408–14.

22. Watson HK, Weinzweig J, Guidera PM, et al. One thousand intercarpal arthrodeses. J Hand Surg [Br] 1999; 24(3):307–15. 23. Weiss AP, Sachar K, Glowacki KA. Arthroscopic debridement alone for intercarpal ligament tears. J Hand Surg [Am] 1997; 22(2):344–9. 24. Ruch DS, Poehling GG. Arthroscopic management of partial scapholunate and lunotriquetral injuries of the wrist. J Hand Surg [Am] 1996; 21(3):412–7. 25. Nakamura T, Cooney WP, III, Lui WH, et al. Radial styloidectomy: a biomechanical study on stability of the wrist joint. J Hand Surg [Am] 2001; 26(1):85–93. 26. Jeffries AO, Craigen MA, Stanley JK. Wear patterns of the articular cartilage and triangular ﬁbrocartilaginous complex of the wrist: a cadaveric study. J Hand Surg [Br] 1994; 19(3):306–9. 27. Barnard L, Stubbins S. Styloidectomy of the radius in the surgical treatment of non-union of the carpal navicular. J Bone Joint Surg 1948; 30A:98–102. 28. Malerich MM, Clifford J, Eaton B, et al. Distal scaphoid resection arthroplasty for the treatment of degenerative arthritis secondary to scaphoid nonunion. J Hand Surg [Am] 1999; 24(6):1196–205. 29. Soejima O, Iida H, Hanamura T, et al. Resection of the distal pole of the scaphoid for scaphoid nonunion with radioscaphoid and intercarpal arthritis. J Hand Surg [Am] 2003; 28(4):591–6. 30. Steinmann SP, Bishop AT, Berger RA. Use of the 1,2-intercompartmental supraretinacular artery as a vascularized pedicle bone graft for difﬁcult scaphoid nonunion. J Hand Surg [Am] 2002; 27(3):391–401. 31. Cooney WP, III, Dobyns JH, Linscheid RL. Nonunion of the scaphoid: analysis of the results from bone grafting. J Hand Surg [Am] 1980; 5(4):343–54. 32. Smith BS, Cooney WP. Revision of failed bone grafting for nonunion of the scaphoid. Treatment options and results. Clin Orthop 1996; 327:98–109. 33. Imbriglia JE, Broudy AS, Hagberg WC, et al. Proximal row carpectomy: clinical evaluation. J Hand Surg [Am] 1990; 15(3):426–30. 34. Tomaino MM, Miller RJ, Cole I, et al. Scapholunate advanced collapse wrist: proximal row carpectomy or limited wrist arthrodesis with scaphoid excision? J Hand Surg [Am] 1994; 19(1):134–42. 35. Salomon GD, Eaton RG. Proximal row carpectomy with partial capitate resection. J Hand Surg [Am] 1996; 21(1):2–8. 36. Jebson PJ, Hayes EP, Engber WD. Proximal row carpectomy: a minimum 10-year follow-up study. J Hand Surg [Am] 2003; 28(4):561–9. 37. DiDonna ML, Kiefhaber TR, Stern PJ. Proximal row carpectomy: study with a minimum of ten years of follow-up. J Bone Joint Surg Am 2004; 86-A(11):2359–65. 38. Roth JH, Poehling GG. Arthroscopic “-ectomy” surgery of the wrist. Arthroscopy 1990; 6(2):141–7. 39. Culp RW, Osterman AL, Talsania JS. Arthroscopic proximal row carpectomy. Techniques in Hand and Upper Extremity Surgery. Philadelphia, PA: Lippincott-Raven, 1997:116–9. 40. Tham S, Coleman S, Gilpin D. An anterior portal for wrist arthroscopy. Anatomical study and case reports. J Hand Surg [Br] 1999; 24(4):445–7. 41. Crabbe WA. Excision of the proximal row of the carpus. J Bone Joint Surg Br 1964; 46:708–11. 42. Culp RW, Lemel M, Taras JS. Complications of common carpal injuries. Hand Clin 1994; 10(1):139–55. 43. Green DP. Proximal row carpectomy. Hand Clin 1987; 3(1):163–8. 44. Tomaino MM, Delsignore J, Burton RI. Long-term results following proximal row carpectomy. J Hand Surg [Am] 1994; 19(4):694–703. 45. Wyrick JD, Stern PJ, Kiefhaber TR. Motion-preserving procedures in the treatment of scapholunate advanced collapse wrist: proximal row carpectomy versus four-corner arthrodesis. J Hand Surg [Am] 1995; 20(6):965–70. 46. Baumeister S, Germann G, Dragu A, et al. Functional results after proximal row carpectomy (PRC) in patients with SNAC-/ SLAC-wrist stage II. Handchir Mikrochir Plast Chir 2005; 37(2):106–12. 47. Neviaser RJ. On resection of the proximal carpal row. Clin Orthop Relat Res 1986; 202:12–5.

32 Arthroscopic Treatment of Wrist Ganglion Cysts Scott R. Hadley

Peripheral Nerve Research Laboratory, Department of Orthopedic Surgery, University of California, Irvine, Irvine, California, U.S.A.

Ranjan Gupta

Peripheral Nerve Research Laboratory, Department of Orthopedic Surgery, Anatomy & Neurobiology, and Biomedical Engineering, University of California, Irvine, Irvine, California, U.S.A.

& INTRODUCTION Ganglion cysts are the most commonly diagnosed and treated soft tissue tumor in the hand and wrist (1). They are deﬁned as cyst-like masses closely associated with either joint or tendon sheaths that contain a mucinous or jellylike ﬂuid. The occurrence of these masses is greater in women than in men, with a female to male ratio ranging from 2:1 to 4:1 (2). They most commonly present in the second to ﬁfth decades of life (1). Ganglion cysts may arise almost anywhere on the wrist and hand, but the majority (60–70%) of ganglia present at the dorsum of the wrist (1,3). The volar wrist is the second most common location of ganglion cysts accounting for 18% to 20% (1). The cause, natural history, and pathogenesis of wrist ganglion cysts remain controversial (3–5). Etiologic explanations include synovial herniation, displaced germ cells resulting in dermoid cysts, overgrowth of synovial tissue, and mucoid degeneration (1). The prevailing theory is that ganglia develop from connective tissue by myxoid degeneration and disintegration of collagen ﬁbers, with mucinous ﬂuid accumulation by the progressive liquefaction of collagen ﬁbers (4,6). Histologic analysis shows dense collagen bundles which form a delimiting capsule around the mucinous ﬂuid that communicates with the adjacent joint through a ganglion stalk (3). The cyst ﬂuid is primarily composed of hyaluranic acid, with signiﬁcant amounts of albumin, globulin, and glucosamine (3). The mucin is typically clear, but may be blood tinged. Despite the microscopic evidence of the mucoid theory, it inadequately explains several important aspects of ganglion cyst pathology, including why the masses have a tendency to spontaneously resolve or recur, and the predilection for cysts development in adolescents and adults populations (1). It also has been hypothesized that wrist ganglia are a secondary manifestation of underlying ligamentous pathology and joint instability (5,7). Previous history of trauma to the wrist has been correlated in 10% to 50% of wrist ganglion cases (5). Damage to the scapholunate ligament (SL) ligament is believed to be the origin for most dorsal wrist ganglia, while volar ganglia are thought to arise from injury to the scaphotrapezial joint or the radiocarpal joint (3,5). In support of this idea, histology of the ganglion stalk has revealed a complex interconnected series of cysts that form a one-way valve between the dorsal capsule and SL ligament, presumably as a response to tissue trauma (1). This one-way valve stalk allows the wrist joint to pump ﬂuid into the overlying ganglion cyst, thus explaining the activity related increase in ganglion size. A recent study reported a high association of ganglia with types II and III

scapholunate and type III lunatotriquetral instabilities (8). Further evidence is provided by a retrospective study that found 17 patients who had undergone dorsal ganglion resection required subsequently treatment for rotary subluxation of the scaphoid (5). Ganglion cysts of the wrist are varied in their presentation. Many patients complain of a palpable mass up to several centimeters in diameter, while other patients have cysts that can only be appreciated with the wrist in ﬂexion. An even smaller patient population suffer from occult ganglion that may cause persistent wrist pain without a palpable mass (2). The myriad of symptoms associated with ganglion cysts of the wrist are explained by the mass effect of the ganglia on surrounding structures. The most common symptom of dorsal wrist ganglia is a dull ache, which is believed to be a result of compression of the terminal branch of the posterior interosseous nerve. Other frequent complaints include subjective weakness, localized swelling, and limited range of motion. Current treatment options for ganglion cysts of the wrist include patient reassurance (benign neglect), aspiration, injections of corticosteroid, hyaluronidase or sclerosing agents, and surgical excision (4,6,9–11). All of these treatments have inherent advantages and disadvantages, and variable degrees of success (3,7,11–14). Currently, the mainstay of surgical treatment remains open ganglion excision (1,3,7,15), but the minimally-invasive arthroscopic approach is gaining popularity because it’s a safe procedure that also permits the inspection of the SL and surrounding structures to rule out joint instability (2). Arthroscopic removal of dorsal ganglion of the wrist was ﬁrst described in 1995 by Osterman and Raphael (13), and has become an accepted technique in many institutions. Conversely, an arthroscopic technique for resection of volar ganglion of the wrist has been described only twice in the English peerreviewed literature and has not gained widespread appeal secondary to the potential high risk of neurovascular damage (16,17). Regardless of the surgical approach, the goals of ganglion surgery should be: (i) ganglion excision through a cosmetically acceptable scar, (ii) minimizing injury to surrounding structures, (iii) evaluation of carpal ligament complex, and (iv) maintain wrist range of motion.

& INDICATIONS It is important to consider the patients expectations in developing a management plan for wrist ganglions. Many

258 & Hadley and Gupta

need the mass to be removed because of functional limitations, discomfort, cosmesis, or fear that it could be something worse. Others seek only assurance of a benign process. The indications for surgical treatment of wrist ganglions whether open or arthroscopic, are relative and based on the patient’s symptoms, expectations and failure of conservative treatment. The following clinical situations are most amendable to arthroscopic ganglion cyst excision: & & &

primary, unoperated wrist ganglion, suspected intracarpal pathology, such as scapholunate instability, and cosmetic concerns, such as hypertrophic scarring or patient’s preference.

General contraindications are patients who are unable to tolerate anesthesia or wrist surgery. Recurrent or occult ganglion cysts may be better treated with open excision.

& CONSIDERATION FOR PREOPERATIVE PLANNING A key consideration in management is the fact that ganglion cysts have a spontaneous resolution rate of 28% to 58% (2). All nonoperative treatments are associated with high cyst recurrence. For example, needle aspiration of the cystic ﬂuid, with or without steroid injection, has a recurrence rate of 60% (18). On the other hand, surgical excision of wrist ganglion cysts using either an open or arthroscopic technique has a reported recurrence rate of less than 10%. It is important to obtain a good patient history and perform a thorough physical exam to exclude the rare possibility of a malignancy. Other conditions that may cause diffuse swelling of the dorsum of the wrist, such as extensor tenosynovitis, lipomas, and other hand tumors should also be considered. Patients with a ganglion cyst will usually report a mass that waxes and wanes in size, along with an achiness of the wrist. A key to diagnosis is a mass that can be transilluminated with a light, which indicate its ﬂuid content. Aspiration of a gelatinous material conﬁrms the diagnosis. Wrist radiographs are usually obtained prior to any planned surgical procedure to rule out SL dissociation and arthritis. Occasionally, MRI are indicated for occult ganglions or suspected solid tumor. The anatomical location of the ganglion cysts is important to correlate with symptoms and to guide surgical treatment. Dorsal ganglia usually project between the extensor pollicus longus and the extensor digitorum communis ligaments, with or without a pearly-white stalk that extends to the SL and dorsal capsule (2). The most common volar ganglion lesion site is the interval between the radioscaphocapitate and the long radiolunate ligaments, with a stalk extending to the radiocarpal joint (16,19). Surgical excision of the cyst decompresses the affected area and in most cases alleviates the symptoms of pain and weakness (2,10–12,14).

& SURGICAL TECHNIQUE The surgical setup and equipment for arthroscopic treatment of wrist ganglion cysts is the same as for general wrist arthroscopy (Fig. 1). An axillary block or general anesthesia is used with a tourniquet for better visualization (20). Before wrist distraction, a thorough wrist examination under anesthesia should be performed. With the hand and wrist placed in 3–4 kg of distraction, the ganglion and portal sites are identiﬁed and marked.

FIGURE 1 Typical surgical setup for arthroscopic dorsal wrist ganglionectomy. The cyst is outlined and is just distal to the 3-4 portal. Source: Courtesy of Virak Tan, MD.

In dorsal wrist ganglionectomy there are several techniques described in the literature. Osterman and Raphael’s original technique is done by ﬁrst establishing the 6R portal to evaluate the proximal carpal row, capsular and interosseous ligaments for concomitant pathology. The arthroscope is then pointed radially and dorsally towards the dorsum of the SL to view the ganglion base. External pressure on the cyst can accentuate the bulge of the cyst into the joint. Once the pathologic tissue is clearly identiﬁed, an 18-gauge needle is introduced through the 3-4 portal, as visualized by the 6R portal, to determine the correct position for instruments. Commonly, the needle is passed through the ganglion and into the stalk. Following the same principles, recent surgical reports of arthroscopic dorsal wrist ganglion resection have abandoned the use of a needle to guide instrument placements and instead start directly with either the 3-4 or 4-5 portal for inspection of the joint and identiﬁcation of the ganglion (11,12,14). All techniques use an arthroscopic full-radius resector to remove a 1-cm2 area of capsule at the ganglion base along with the entire ganglion and stalk. Often times, the mucinous cyst ﬂuid can be seen decompressing into the joint during resection. Circumferential resection from a portal created directly over the cyst is sometimes helpful to ensure complete excision of the pathologic tissue. When there is a region of synovitis close to the ganglion stalk it is also debrided. Completion of the dorsal wrist ganglion excision and partial capsulectomy is signaled when the extensor pollicus longus or extensor digitorum communis tendons, which lie superﬁcial to the dorsal capsule, are visualized. Care should be taken to avoid injury to the extensor tendons, carpal articular surfaces, and scapholunate interosseous ligament by working with the shaver facing away from the joint. When there is doubt about the complete arthroscopic resection of the ganglion, it is appropriate to convert to an open approach (11,12). The portal sites are closed with a single 4-0 nylon suture. Postoperatively, the wrist can be immobilized for one week. At 7 to 10 days postoperatively, the sutures are removed and the patient is allowed activity as tolerated with avoidance of strenuous activity or weight bearing for six weeks.

Arthroscopic Treatment of Wrist Ganglion Cysts & 259

Alternatively, some surgeons prefer no immobilization and allow activity as tolerated. The surgical approach for arthroscopic volar ganglion resection is based on the same principles for dorsal ganglions but with an added emphasis on avoiding critical neurovascular structures because the 1-2 portal is often used. Placement of this portal puts branches of the dorsal radial sensory nerve and radial artery at risk for injury. The indications for this technique are limited and, accordingly, no consensus on the arthroscopic surgical approach has been established. The key to low recurrence of ganglion cysts is complete resection of the ganglion with the connecting stalk and associated capsule. However, arthroscopic identiﬁcation of the stalk ranges from 29% to 79% (11–14). Consequently, whether or not the stalk is visualized, a 1-cm2 area of the dorsal capsule adjacent to the ganglion should be resected (2,11–14). Alternatively, Nishikawa et al. argue that the area of resection should be as small as possible and developed a new arthroscopic classiﬁcation of ganglia based on the degree of stalk visualization, which minimizes the required amount of dorsal capsular resection (11).

FIGURE 3 Fraying of the dorsal capsule in the region of the scapholunate ligament interval, as seen with the arthroscope in the 4-5 portal. Source: Courtesy of Virak Tan, MD.

& Case Example

& COMPLICATIONS

A thirty-eight-year-old right-hand dominant woman who has failed aspiration and methylprednisilone injection of a dorsal ganglion cyst elected to undergo an arthroscopic ganglionectomy. The arthroscope was inserted through the 4-5 portal and routine diagnostic wrist arthroscopy was performed. The SL interosseous ligament (Fig. 2) was intact but there was fraying of the dorsal capsule over the SL ligament (Fig. 3). An 18-gauge needle was inserted at the 3-4 portal, through the cyst into the radiocarpal joint, where is corresponded to the area of capsular fraying. External pressure on the cyst caused the ganglion to bulge into the joint (Fig. 4). The arthroscopic shaver, inserted through the 3-4 portal, was used to excise about 1 cm2 of dorsal capsule (Fig. 5). Care was taken to avoid injuring the overlying extensor tendons which can be easily seen after the capsular excision (Figs. 6 and 7). Postoperatively, the wrist was not immobilized and activity was progressed as tolerated.

There are no published reports of intraoperative complications during wrist arthroscopic ganglionectomy (14); however, it has been reported that failure to completely excise the ganglion stalk and capsular attachment during surgical excision lead to a 30% to 60% recurrence (2). The postoperative complaints are rare and usually resolve spontaneously or with minimal treatment. In the ﬁrst postoperative visit, several cases of dorsal wrist swelling have been reported, presumably due to arthroscopic ﬂuid, and were successfully treated with aspiration (12,21). One patient had a neuropraxia of the superﬁcial branch of the radial nerve which resolved with neurolysis (21). Wrist stiffness is another common postoperative complaint that subsides with wrist range of motion exercises (14). Persistent wrist symptoms after ganglion excision should lead one to suspect underlying instability at the scapholunate interval (5).

L

*

SL

S

R FIGURE 2 Intra-articular view through the 4-5 showing the scapholunate ligament (SL) interval with an intact SL ligament. Abbreviations: S, scaphoid; L, lunate; R, radius. Source: Courtesy of Virak Tan, MD.

FIGURE 4 An 18-gauge needle inserted through the cyst into the radiocarpal joint. The needle entered the joint in the area of capsular fraying. External pressure on the cyst caused the ganglion to bulge into the joint (*). Source: Courtesy of Virak Tan, MD.

260 & Hadley and Gupta (A)

(B)

FIGURE 5 (A) Debridement of the capsular fraying with an arthroscopic shaver through the 3-4 portal. (B) After debridement and decompression of the ganglion cyst, a 1-cm2 area of dorsal capsule is excised. Source: Courtesy of Virak Tan, MD.

& OUTCOME Open resection of wrist ganglion is currently the more widely used surgical technique and is the gold standard by which all other approaches are compared. The outcome variable that is

FIGURE 6 At completion of the procedure, the extensor tendons can be visualized through the hole in the dorsal capsule. Source: Courtesy of Virak Tan, MD.

FIGURE 7 A probe is used to deliver the extensor tendons into the joint to ensure that injury has not occurred. Source: Courtesy of Virak Tan, MD.

most commonly reported in the literature is recurrence rate. In their initial arthroscopic study, Osterman and Raphael reported only 1 recurrence in over 150 arthroscopic ganglionectomies (13). Subsequent evaluations of arthroscopic cyst removal have reported recurrence rates at or less than 5% (8,11,12,14). The ﬁrst prospective, randomized comparison of recurrence rates for open and arthroscopic surgical dorsal ganglia excision found a recurrence rate of 8.7% (2/23) in the open surgical group and a rate of 10.7% (3/28) in the arthroscopic group (21). The slightly higher arthroscopic recurrence rate conﬂicts with previously published data. It is important to note that the technique used in this study did not include an additional midcarpal portal site to rule out additional wrist pathology (21). Whether arthroscopic technique is superior to open surgery in the incidence of postoperative cyst recurrence rates is still ambiguous but the studies to date indicate that the rates are at least comparable. Other key measures of ganglia excision outcome are return of wrist motion and pain relief. Most arthroscopic studies report an overall postoperative improvement in range of wrist motion, average grip strength, and pain scores (8,12,14). Alternatively, the randomized comparison study noted greater complaints of scar discomfort and residual pain in the arthroscopic group at the two month point (21). This unexpected ﬁnding is tempered by the fact that the long-term follow-up indicated less reports of occasional or mild pain in the arthroscopic treated patients (21). Overall patients who undergo arthroscopic ganglia surgery are satisﬁed with the results of their surgery (8,11–14). The most recent report on outcome of arthroscopic resection of wrist ganglia is by Mathoulin et al. in 2004 (17). These authors performed 96 dorsal and 32 volar ganglionectomies. At an average follow-up of greater than two years, there were four recurrences in the dorsal and none in the volar group. There was one patient in the volar group that had moderate hematoma which resolved after three days. Range of motion and grip strength were reported to be the same or better than the unoperated side.

& SUMMARY Ganglia of the wrist and hand are common occurrences that often require surgical intervention for deﬁnitive treatment.

Arthroscopic Treatment of Wrist Ganglion Cysts & 261

Open cyst excision has been described as trading a lump for a scar (13). Proponents of the arthroscopic ganglionectomy point to the advantages of this minimally-invasive procedure which include less postoperative pain and earlier return to function. The arthroscopic technique is performed using smaller portal incisions and usually creates a better cosmetic outcome (2). It also provides a more controlled excision of the ganglion while protecting the SL (14). Finally, the arthroscopic technique allows the surgeon the ability to thoroughly examine the surrounding anatomical structures, evaluating possible causes of the ganglion as well as associated intraarticular pathology. Fortunately, surgical excision of wrist ganglia is a highly successful treatment that is rarely associated with any serious complications. Although the arthroscopic technique has not yet been clearly proven to be uniformly superior to open surgical resection in incidence of cyst recurrence, it is at least equivalent (1,7,11–14). It compares favorably with open excision when evaluating the outcome parameters of motion, wrist strength, and residual pain (14). Accordingly, arthroscopic excision for wrist ganglion is an acceptable minimally-invasive surgical alternative for treating ganglion cysts of the wrist.

& SUMMATION POINTS

Indications & & & &

Primary, unoperated wrist ganglion, Suspected associated intracarpal pathology Cosmetic concerns, such as hypertrophic scarring Patient’s preference

Outcomes & &

90% to 95% success rate Recurrence rate similar to open technique

Complications & & &

No reports of intraoperative complications Temporary wrist swelling Neuropraxia

2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.

15. 16. 17. 18. 19.

20.

& REFERENCES 1. Angelides AC. Ganglions of the hand and wrist. In: Green DP, ed. Operative Hand Surgery. New York: Churchhill-Livingston, 1999:2172 (see also 2175).

21.

Bienz T, Raphael JS. Arthroscopic resection of the dorsal ganglia of the wrist. Hand Clin 1999; 15(3):429–34. Angelides AC, Wallace PF. The dorsal ganglion of the wrist: its pathogenesis, gross and microscopic anatomy, and surgical treatment. J Hand Surg [Am] 1976; 1(3):228–35. Soren A. Pathogenesis, clinic, and treatment of ganglion. Arch Orthop Trauma Surg 1982; 99(4):247–52. Watson HK, Rogers WD, Ashmead D, IV. Reevaluation of the cause of the wrist ganglion. J Hand Surg [Am] 1989; 14(5):812–7. Soren A. Pathogenesis and treatment of ganglion. Clin Orthop Relat Res 1966; 48:173–9. Clay NR, Clement DA. The treatment of dorsal wrist ganglia by radical excision. J Hand Surg [Br] 1988; 13(2):187–91. Edwards S. Prospective outcomes and associations of wrist ganglia resected arthroscopically. In: American Society for Surgery of the Hand, 59th Annual Meeting, New York, 2004. Angelides AC. Ganglions of the hand and wrist. In: Green DP, ed. Operative Hand Surgery. New York: Churchhill-Livingston, 2005:2172 (see also 2175). Ho PC, Grifﬁths J, Lo WN, Yen CH, Hung LK. Current treatment of ganglion of the wrist. Hand Surg 2001; 6(1):49–58. Nishikawa S, Toh S, Miura H, Arai K, Irie T. Arthroscopic diagnosis and treatment of dorsal wrist ganglion. J Hand Surg [Br] 2001; 26(6):547–9. Luchetti R, Badia A, Alfarano M, Orbay J, Indriago I, Mustapha B. Arthroscopic resection of dorsal wrist ganglia and treatment of recurrences. J Hand Surg [Br] 2000; 25(1):38–40. Osterman AL, Raphael J. Arthroscopic resection of dorsal ganglion of the wrist. Hand Clin 1995; 11(1):7–12. Rizzo M, Berger RA, Steinmann SP, Bishop AT. Arthroscopic resection in the management of dorsal wrist ganglions: results with a minimum 2-year follow-up period. J Hand Surg [Am] 2004; 29(1):59–62. Nelson CL, Sawmiller S, Phalen GS. Ganglions of the wrist and hand. J Bone Joint Surg Am 1972; 54(7):1459–64. Ho PC, Lo WN, Hung LK. Arthroscopic resection of volar ganglion of the wrist: a new technique. Arthroscopy 2003; 19(2):218–21. Mathoulin C, Hoyos A, Pelaez J. Arthroscopic resection of wrist ganglia. Hand Surg 2004; 9(2):159–64. Nield DV, Evans DM. Aspiration of ganglia. J Hand Surg [Br] 1986; 11(2):264. Perrotto CJ, Clembosky G, Muratore A, Zaidenberg CR. Arthroscopic resection of radial palmar ganglions of the wrist. In: American Society for Surgery of the Hand, 59th Annual Meeting, New York, 2004. Gupta R, Bozentka DJ, Osterman AL. Wrist arthroscopy: principles and clinical applications. J Am Acad Orthop Surg 2001; 9(3):200–9. Kang L, Weiss A, Akelman E. Arthroscopic versus open dorsal ganglion cyst excision: a prospective, randomized comparison of rates of recurrence and of residual pain. In: American Society for Surgery of the Hand, 59th Annual Meeting, New York, 2004.

33 Basal Joint Arthritis-Arthroscopy/Debridement Jay T. Bridgeman and Sanjiv H. Naidu

Department of Orthopedics and Rehabilitation, Penn State University College of Medicine, Hershey, Pennsylvania, U.S.A.

& INTRODUCTION

& CONSIDERATIONS FOR PREOPERATIVE PLANNING

The thumb basal joint is the second most commonly involved site of osteoarthritis in the hand, after the distal interphalangeal joint. It causes signiﬁcant disability due to painful, weakened pinch and grip (1). Women develop basal joint arthritis 10 to 15 times more often than men. Geographical and racial differences also have an inﬂuence on the prevalence of osteoarthritis in the hand. Basal joint arthritis is less frequently observed in Asian individuals when compared to caucasians (2).

& History and Physical Exam Patients typically present with pain at the basal joint, especially with pinch and grip. With disease progression, breadth of grasp and forceful lateral pinch are limited. Patients complain of pain at the base of the thumb and symptoms of instability.

& PATHOGENESIS

An enlarging prominence described as a “shoulder sign” occurs at the base of the thumb. This is due to dorsal metacarpal subluxation on the trapezium and metacarpal adduction with disease progression.

The etiology of basal joint arthritis is multifactorial. Synovial derived cytokines such as interleukin-1 have been shown to activate degradative enzyme synthesis in the chondrocyte, which results in breakdown of the proteoglycan matrix components (1). Neutral proteases and metalloproteoglycanases play a central role in catabolism of the matrix, resulting in decreased hydrophilic properties and less hydration of the matrix. These biochemical events signiﬁcantly alter the mechanical properties of hyaline cartilage, making it more susceptible to failure under load (2). Pellegrini analyzed surgical and postmortem specimen of the basal joint and identiﬁed chondromalacia in the dorsal compartment and eburnated bone of the palmar joint surfaces (3). Palmar cartilage degeneration was closely associated with degeneration of the beak ligament from the articular margin of the metacarpal. The ligament acts as a checkrein to dorsal migration of the metacarpal on the trapezium during dynamic ﬂexion-adduction of the thumb. Functional incompetence of the beak ligament results in pathologic laxity, abnormal translation of the metacarpal on the trapezium, and generation of excessive shear forces between the joint surfaces, particularly within the palmar portion of the joint during grip and pinch activity (3,4). Pellegrini also identiﬁed that the primary loading areas during lateral pinch are in the same palmar regions of the joint as the eburnated surfaces in diseased joints (5).

& INDICATIONS The indications for arthroscopic debridement of the basal joint are post-traumatic arthritis and idiopathic arthritis (Eaton stage 1 and 2) which have failed nonoperative treatment (1). We offer this to patients who due to life/work requirements want to delay ligament reconstruction and tendon interposition. Culp’s indications are stage 1 or 2 osteoarthritis, post-traumatic osteoarthritis, end-stage osteoarthritis (hemi or complete trapeziectomy for stage 3 or 4 disease). His contraindications are metacarpal phalangeal hyperextension and Ehlers-Danlos syndrome (6).

Inspection

Palpation

Tenderness is elicited with palpation along the thumb trapeziometacarpal joint. As the disease progresses, patients develop instability, subluxation, and crepitance.

Provocative Tests

The grind test combines axial compression, ﬂexion, extension, and circumduction, which reproduce pain at the basal joint. A thorough exam of the hand is necessary to identify other conditions such as stenosing ﬂexor tenosynovitis and de Quervain’s tenosynovitis, which if left untreated may make postoperative therapy difﬁcult (2).

& PREOPERATIVE IMAGING The three radiographic views obtained to evaluate the basal joint include a posterior anterior, lateral, as well as the pronated anterior posterior view. A spectrum of disease progression, from isolated trapezial-metacarpal joint to pantrapezial joint complex can be affected. Eaton and Littler described four stages (7): Stage 1: A normal joint with the exception of possible widening from synovitis Stage 2: Joint space narrowing with debris/osteophytes less than 2 mm in size Stage 3: Joint space narrowing with debris/osteophytes greater than 2 mm in size Stage 4: Scaphotrapezial joint space involvement in addition to narrowing of the trapezial-metacarpal joint. Irwin et al. and Tomaino have identiﬁed concomitant scaphotrapezoidal joint arthritis, which if left untreated can lead to residual pain (1,8). This is poorly identiﬁed with radiographs and Tomaino recommends intraoperative assessment. Radiographic ﬁndings do not always correlate with patient’s

264 & Bridgeman and Naidu

clinical symptoms, which necessitate a good physical exam before considering operative treatment.

& NONOPERATIVE TREATMENT Nonsteroidal anti-inﬂammatory medications, intra-articular steroid injection, hand or forearm based thumb spica splint immobilization, and thenar muscle isometric conditioning are hallmarks of nonoperative treatment (2). These treatment modalities are usually effective for a limited period of time, but always should be initiated before operative treatment is offered. FIGURE 2 Insufﬂation of joint.

& SURGICAL TECHNIQUE & Equipment

1R Portal

Berger described a technique for arthroscopic evaluation of the basal joint. A short barrel 1.9 mm arthroscope connected to standard arthroscopic electronic equipment, including a small color camera, focusing connector, video monitor, video recorder, printer, and light source is used in this procedure. Normal saline is used to irrigate the joint through the arthroscope sheath. The size of the joint often limits full distention to 2 ml of ﬂuid. Normal saline is delivered using a pump-assisted system. The pressure is set to 50 to 75 mmHg throughout the procedure. The thenar eminence is observed for swelling indicating extravasation. If this occurs the pressure is lessened to gravity. An outﬂow cannula may be placed, or an in-line three-way stopcock may be implemented, but one may rely upon the suction provided by a shaver system for intermittent ﬂuid exchange. For debridement, a 2.0 mm full-radius side shaver and 2.0 mm burr are used with the power shaver system. Additional equipment available for immediate use includes a small probe, a variety of small arthroscopic grabbers, a suction punch, and a power wire driver with a standard assortment of Kirschner wires (K-wires). A commercially available sterile self-contained distraction device that is positioned directly on the operating hand table can be used; however, any method of applying the desired level of traction in a sterile environment can be used (9).

The incision is located just anterior to the abductor pollicis longus tendon. The plane of this portal passes through the nonligamentous capsule just lateral to the anterior oblique ligament. The dorsoradial ligament (DRL), posterior oblique ligament(POL), and ulnar collateral ligament are well visualized through this portal (9).

1U Portal

The incision is located just posterioulnar to the extensor pollicis brevis tendon. The plane passes between the DRL and POL. The anterior oblique ligament and ulnar collateral ligament are well visualized through this portal (Fig. 1) (9).

& Procedure Regional or general anesthesia is administered as for other upper-extremity arthroscopic procedures. A single dose of parenteral antibiotics is generally administered prior to starting

& Anatomic Landmarks Palpation is used to identify the landmarks of the arthroscopic portals. Berger described two portals: the 1R (radial) and the 1U (ulnar) portals. They allow visualization of most of the distal articular surface of the trapezium and the proximal articular surface of the ﬁrst metacarpal. The lateral most joint surface and joint capsule are difﬁcult to view through either portal (9).

FIGURE 1 Portal landmarks.

FIGURE 3 Veriﬁcation of needle placement in joint with anterior posterior and lateral ﬂuoroscopic images.

Basal Joint Arthritis-Arthroscopy/Debridement & 265

FIGURE 6 Debridement of joint debris and synovium.

FIGURE 4 Arthroscopic instrument placement into carpometacarpal joint.

the procedure. A pneumatic tourniquet is applied to the limb. The limb is prepared and draped in a standard sterile fashion. The extremity is placed in traction using a single thumb ﬁnger trap. Five to eight pounds of longitudinal traction is applied. Pertinent landmarks: the proximo-posterior edge of the base of the ﬁrst metacarpal, the radial artery, and the tendons of abductor pollicis longusand extensor pollicis brevis are palpated and marked. The extremity is then exsanguinated and the pneumatic tourniquet is inﬂated (9). A 20-guage needle is advanced into the joint just proximal to the base of the ﬁrst metacarpal through the planned portal site. This conﬁrms the appropriate entry angle for the arthroscope and allows insufﬂation of 1of 2 ml of ﬂuid into the joint (Fig. 2). We then conﬁrm intra-articular needle placement with ﬂuoroscopy (Fig. 3). A single 3-mm longitudinal incision is made over each portal site. Blunt subcutaneous tissue dissection is performed to avoid branches of the superﬁcial radial nerve as well as the deep and superﬁcial branches of the radial artery. After entering the joint capsule, a 1.9 mm tapered trocar and its sheath are introduced through each portal site, generally with a slightly distal inclination. Berger describes using a gentle sweeping motion to ﬁnd a natural division between the ligaments in the ﬁbers of the joint capsule, particularly the 1U portal (9). The probe or shaver is easily introduced in the portal opposing the arthroscope (Fig. 4). At this point, arthroscopic observations and procedures may begin. When the synovial lining of the joint capsule

obscures a detailed visualization of the capsular ligaments, a synovectomy with the 2.0-mm shaver may assist the surgeon in viewing speciﬁc structures. Hypertrophic synovium and cartilage lesions are debrided (Figs. 5 and 6). The joint is irrigated. The portals are closed with nylon suture (9).

& COMPLICATIONS The branches of the superﬁcial radial nerve surround the arthroscopic ﬁeld. One or both branches may be damaged with the approach to the joint capsule. Development of altered sensation or a painful neuroma is possible. This can be avoided by using a needle to conﬁrm intra-articular placement and blunt dissection as described. The radial artery courses immediately posterior and ulnar to the arthroscopic ﬁeld and may inadvertently be damaged during the procedure. This may lead to loss of perfusion to the thumb or other digits in a hand where dominant blood supply is through the radial artery. Knowledge of the anatomy of the region and awareness of the location of the branches of the superﬁcial radial nerve and the radial artery, along with careful blunt dissection as the joint capsule is approached will minimize the risk of injury. Inadvertent entry into the wrong joint is possible due to the close proximity of the radioscaphoid and scaphotrapezial joints. Careful palpation of soft tissue landmarks and conﬁrmation with ﬂuoroscopy should minimize these risk as well (9).

& OUTCOMES Culp described arthroscopic debridement, synovectomy, and thermal capsular shrinkage for trapeziometacarpal arthritis of the thumb (6). This series described 24 thumbs in 22 patients, with 88% good to excellent results with 1.2 to 4 years follow-up. Pinch strength improved 22%. There are no studies that report long-term results of this procedure (6).

& SUMMATION POINTS

Indications & &

post-traumatic arthritis idiopathic arthritis (Eaton stage 1 and 2).

Outcomes FIGURE 5 entry.

Hypertrophic synovium and chondromalacia upon joint

& &

Short term results for debridement are good No long term results are published.

266 & Bridgeman and Naidu

Complications & & &

superﬁcial radial nerve injury radial artery injury inappropriate joint entry.

& REFERENCES 1.

Tomaino M. Osteoarthritis of the thumb and ﬁngers. In: Trumble T, ed. Hand Surgery Update 3. Rosenont, IL: American Society for Surgery of the Hand, 2003:504–13. 2. Tomaino M, King J, Leit M. Thumb basal joint arthritis. In: Green D, Pederson W, Robert H, Scott W, eds. Green’s Operative Hand Surgery. 5th ed. Philadelphia, PA: Elsevier, 2005:504–13. 3. Pellegrini V. Osteoarthritis of the trapeziometacarpal joint: the pathophysiology of articular cartilage degeneration. II. Anatomy and pathology of the aging joint. J Hand Surg [Am] 1991; 16:975–82.

4.

5. 6. 7. 8. 9.

Pellegrini V. Osteoarthritis of the trapeziometacarpal joint: the pathophysiology of articular cartilage degeneration. I. Anatomy and pathology of the aging joint. J Hand Surg [Am] 1991; 16:967–74. Pellegrini V, Olcott CW, Hollenberg G. Contact patterns in the trapeziometacarpal joint: the role of the palmar beak ligament. J Hand Surg [Am] 1993; 18:238–44. Culp R, Rekant MS. The role of arthroscopy in evaluating and treating trapeziometacarpal disease. Hand Clin 2001; 17(2):315–9. Eaton R, Littler J. Ligament reconstruction for the painful thumb carpometacarpal joint. J Bone and Joint Surg [Am] 1973; 55:1655–66. Irwin A, Maffuly N, Chesney RB. Scaphotrapezial arthritis: a cause of residual pain after arthroplasty of the trapeziometacarpal joint. J Hand Surg [Am] 1995; 20:346–52. Berger R. A technique for arthroscopic evaluation of the ﬁrst carpometacarpal joint. J Hand Surg [Am] 1997; 22:1077–80.

34 Arthroscopy of the Basal Joint: Treatment of Arthritis with Soft-Tissue Interposition Julie E. Adams and Scott P. Steinmann

Department of Orthopedic Surgery, Mayo Clinic, Rochester, Minnesota, U.S.A.

& INTRODUCTION Arthritis of the basal joint of the thumb is commonly treated with open techniques involving total or subtotal trapeziectomy and interposition arthroplasty. Multiple procedures and variations have been described and good data are available regarding the outcomes of these techniques. Many are open procedures; however, an arthroscopic technique is advantageous to minimize morbidity and has been shown to have outcomes comparable to open procedures (1–4). Arthroscopy allows for preservation of the joint capsule while facilitating visualization and debridement or excision of an arthritic trapeziometacarpal joint. Although some have described acceptable results following simple arthroscopic debridement (5), bony impingement and metacarpal migration may occur. Interposition arthroplasty prevents bony impingement and buttresses the ﬁrst metacarpus to prevent these problems. We favor a minimal resection of the trapeziometacarpal joint by performing an arthroscopic bony recontouring which effectively fulﬁlls the role of performing a partial trapeziectomy but preserves bone stock. This obviates the problems associated with total trapeziectomy, namely, reduced pinch strength and proximal migration of the ﬁrst metacarpus, and maximizes options for future surgical procedures if symptoms recur. Arthroscopy of the basilar joint of the thumb is performed using a modiﬁcation of the techniques ﬁrst described independently by Berger (6) and Menon (3,7). Following adequate arthroscopic debridement, interposition arthroplasty may be performed with a variety of materials. Published studies have documented clinical outcomes as well as the histological, radiological, and vascular characteristics following open or arthroscopic interposition of allogenic or autologous tissue, xenografts, or synthetic materials (7–17). A diverse variety of materials, including tendon, fascia lata, costochondral graft, Gore-Tex, Gelfoam, and silicone, have been utilized (10,11,13,16). Silicone and Gore-Tex have fallen out of favor due to poor outcomes (11,18,19). Adverse immune effects have been noted with some xenografts (20). Others have used hematoma arthroplasty (21) or tendon interposition with good results (15,18,19). Recently, other options for interposition materials have been introduced. Both xenograft and human dermal grafts can now be processed to yield an acellular collagen scaffold that can be used as an interposition tissue or for tendon and soft-tissue repairs (22). Because the material is rendered acellular during processing, it lacks many of the disadvantages of standard allograft or xenograft tissue. Previous in vivo studies have demonstrated rapid inﬁltration of native cellular agents, including ﬁbroblasts and vascular

tissue, with minimal host inﬂammatory response (22–24). Because of these advantageous characteristics, use of this material for interposition arthroplasty following trapeziectomy was proposed. We currently use a commercially available acellular allograft dermal matrix material and have noted satisfactory patient outcomes with minimal complications. The minimally invasive nature allowed by use of this material is advantageous. However, results of traditional autograft interposition, such as palmaris or plantaris tendon, remain the standard by which these newer materials should be measured.

& INDICATIONS Patients with Eaton (15) stages II or III symptomatic trapeziometacarpal joint arthritis recalcitrant to nonsurgical management are candidates for the procedure. The procedure is contraindicated in the presence of signiﬁcant pantrapezial arthritis, as this will not be adequately addressed by the arthroscopic procedures. Such patients may be better served with an open procedure such as total trapeziectomy. Ligamentous instability is another contraindication, as this procedure will not address this pathology.

& PREOPERATIVE PLANNING Diagnosis of trapeziometacarpal arthritis should conﬁrmed by appropriate physical examination and radiographic studies. In addition, all patients should have had a trial of nonoperative therapy, such as splinting or injections, prior to consideration of surgical management. Preoperative physical examination should document pinch strength, grip strength, and range of motion. Preoperative questionnaires, such as the Disability of Arm, Shoulder and Hand score, may be helpful to document outcomes. Concomitant conditions, such as carpal tunnel syndrome, should be investigated for and excluded. A standard radiographic series, including anteroposterior, lateral, and oblique ﬁlms, should be obtained. Radiographs should exclude pantrapezial arthritis. Some authorities use radiographic measurements to estimate the magnitude of disease (14); however, others have found these measurements to have poor reliability and correlation with intraoperative ﬁndings (25).

& SURGICAL TECHNIQUE The procedure may be performed under either general or regional anesthesia. The patient is placed supine and the operative extremity is prepared and draped in the usual

268 & Adams and Steinmann

FIGURE 1 Operative setup. The hand is suspended in traction via the thumb and/or index ﬁnger, and prepped and draped in the usual sterile fashion. In this ﬁgure, the graft is prepared for insertion into one of the portals.

sterile fashion. A sterile tourniquet is applied, and the thumb is placed in sterile ﬁnger traps with 5 to 8 pounds of traction applied. A standard vertical traction tower as used for wrist arthroscopy is preferred, although a horizontally applied traction system may be used. A traction sleeve to the index ﬁnger may be applied to give additional support to the wrist (Fig. 1).

Landmarks, including the ﬂexor carpi radialis (FCR), abductor pollicis longus (APL), and extensor pollicis longus (EPL), are marked prior to insufﬂation of the joint (Fig. 2). Prior to skin incision, the tourniquet is inﬂated to 250 mmHg. Fluoroscopy is useful to identify the exact locations of the two main portals particularly if the surgeon has limited experience with ﬁrst carpometacarpal (CMC) joint arthroscopy. In patients with signiﬁcant arthritis and partial subluxation, the surgeon may inadvertently enter the scaphotrapeziotrapezoid joint rather than the CMC joint. The two standard portals are the 1-R (radial) and the 1-U (ulnar) portals (Figs. 3–5). The 1-R portal is made just radial to the FCR tendon at the level of the CMC joint. This portal transverses the nonligamentous capsular tissue dorsoradial to the anterior oblique ligament (AOL; Fig. 6A,B) and is furthest from the radial artery and the branches of the superﬁcial radial nerve. The branches of the superﬁcial radial nerve are most commonly found overlying the APL. Consequently, if the 1-R portal is placed in a more ulnar position, closer to the FCR, risk of injury to a branch of the superﬁcial radial nerve is less likely (26). The 1-R portal is useful to examine the dorsal radial ligament (DRL), palmar oblique ligament (POL), and ulnar collateral ligament (UCL), and provides a view of the radial aspect of the joint (6,27). It also allows for visualization of the intermetacarpal ligament and the distal insertions of the AOL into the ﬁrst metacarpal (Fig. 6A,B). The 1-U portal is placed just ulnar to the extensor pollicis brevis (EPB) tendon (Fig. 7). This area can have a higher incidence of superﬁcial radial nerve branches crossing the portal site than the 1-R portal area. Likewise, the radial artery is located only a few millimeters from the ulnar side of the portal. It is safest to make the 1-U portal close to the EPB tendon, as placing the portal in close proximity to the EPL tendon results in a greater chance of radial artery or superﬁcial radial nerve injury. To establish the portal, the skin should be carefully incised and a small hemostat used to gently dissect and spread down to the capsular tissue. This will help avoid traumatic injury to either branches of the superﬁcial radial nerve or the

FIGURE 2 The location of subcutaneous landmarks for portal placement have been indicated by a marking pen on the skin. Spinal needles have been inserted into the 1-R and 1-U portal sites. Source: From Ref. 3.

Treatment of Arthritis with Soft-Tissue Interposition & 269

MII IML

MII MI

MI

MIII UCL

AOL

1-U 1-R

FR

APL

Tm

Tm

EPL

S

1-R

r.a. FIGURE 4 Palmar view of the ﬁrst CMC joint showing the relationship of the 1-R portal and the volar stabilizing ligaments of the thumb: the UCL, AOL, and IML. Abbreviation: AOL, anterior oblique ligament; FR, ﬂexor retinaculum; IML, intermetacarpal ligament; MI, ﬁrst metacarpal; MII, second metacarpal; S, scaphoid; Tm, trapezium; UCL, ulnar collateral ligament. Source: From Refs. 3, 6. Courtesy of Mayo.

APL

EPB s.r.n FIGURE 3 Artist’s depiction of the ﬁrst carpometacarpal joint detailing portal sites (1-R and 1-U) and local anatomic structures. The r.a. and the s.r.n. are in close proximity to the portal sites. Abbreviations: APL, abductor pollicis longus; EPB, extensor pollicis brevis tendon; EPL, extensor pollicis longus tendon; MI, ﬁrst metacarpal; MII, second metacarpal; MIII, third metacarpal; r.a., radial artery; s.r.n., superﬁcial radial nerve; Tm, trapezium. Source: From Refs. 3, 6. Courtesy of Mayo.

radial artery. The 1-U portal tends to enter the joint either through the DRL or between the DRL and the POL. This portal allows for excellent visualization of the AOL and the UCL (Fig. 8A,B). It may also be utilized as the main working portal for interventions following diagnostic arthroscopy (3,6,26,27). A standard 2.7-mm wrist arthroscope is used to visualize the CMC joint. The camera and working portal can be switched back and forth between the 1-R and the 1-U portals as the arthroscopy progresses. It is helpful to sweep the trocar back and forth in the joint prior to placement of the arthroscope since this will tend to help create an initial space for visualization within the joint. An electrocautery or radiofrequency ablation probe is helpful to use initially for debridement of soft tissue prior to performing any bony work.

Once adequate visualization of the joint is achieved, a small joint shaver (3.5 mm) can be used to further debride the joint. Smaller diameter arthroscopic shavers tend to not work as well. Likewise, although it is possible to use a smaller arthroscope such as a 1.9 mm, the visual ﬁeld tends to be limited and consequently the pace of the procedure is slowed. Visualization is also enhanced by use of a standard arthroscopic mechanical pump to continuously irrigate the joint with saline. A dedicated outﬂow cannula is usually not needed if both working portals are large enough to allow egress of ﬂuid. Once adequate visualization has been achieved, the bony work is addressed. Typically, an arthritic biconcave trapezium is observed. An arthroscopic burr (3.5 mm) is then used to remove 3 to 4 mm of distal trapezium (Fig. 9). A smooth bony surface is then carefully created. Viewing from both the 1-R and the 1-U portals is required to be sure accurate planning of the trapezium has been performed. After bony recontouring has been performed, the joint is then ready for placement of the interposition tissue. Interposition tissue depends on the surgeon’s preference. Arthroscopic utilization of autograft tissue, such as the FCR or the palmaris longus tendon, has been described by some authors (7,11). Allograft or xenograft materials may be manufactured to be approximately 1-mm thick, but can

270 & Adams and Steinmann

FIGURE 5 In this cadaveric dissection, the skin has been removed to reveal subcutaneous structures, including branches of the superﬁcial radial nerve, the APL tendon, and the EPB tendon. Abbreviation: APL, abductor pollicis longus; EPB, extensor pollicis brevis tendon. Source: From Ref. 3.

then be folded to double the thickness and cut to match the articular surface area of the joint. This may be sutured with absorbable sutures to maintain the implant in a double layer; however, this step is usually not necessary. The tissue is then placed into the joint by passing a small curved hemostat into a portal and then manipulated until it exits out the opposite portal. A corner of the folded graft is then placed into the grip of the hemostat and pulled into the joint (Fig. 1). Once the graft has been placed into the joint, the arthroscope is replaced into the joint and a probe used to “spread out” the graft to completely cover the cancellous surface of the trapezium. The portals are then closed and the thumb maintained in an abducted position as the traction is removed. Portals should be closed carefully to prevent potential dislocation of the graft. A sterile thumb spica abduction splint is then applied while carefully holding the thumb in an abducted position. Alternatively, a 0.45-Kirchner wire can be passed through the base of the ﬁrst metacarpal into the trapezium to help maintain stability; however, in most cases, a thumb spica splint alone is adequate to maintain reduction. After splinting, a ﬂuoroscopic view can be obtained to conﬁrm restoration of joint space with the interposition graft. This can then be saved and compared to preoperative and subsequent radiographs obtained during follow-up visits (Fig. 10A,B). The splint is changed to a cast at two weeks, at which time the portal sutures are removed. A forearm-based thumb spica abduction cast is then maintained for an additional four weeks, for a total of six weeks of immobilization. After cast removal, the patient should be seen by a hand therapist and instructed in exercises for progressive mobilization. Full activity as tolerated is permitted after the cast is removed. Patients are seen in routine follow-up with radiographs obtained at three months (Fig. 10B).

& COMPLICATIONS During the surgical approach, there is a risk of injury to the branches of the superﬁcial radial nerve. Neuroma formation may occur and may require excision. To minimize risk of nerve injury, incisions should be made through skin only, with deeper blunt spreading of tissue to establish the portals. Extrusion of the graft may occur, requiring removal. Adverse reaction to the interposition material has been demonstrated by other authors, ultimately requiring conversion to another procedure. Most poor outcomes relate to poor patient selection and are due to performing this minimally invasive procedure in patients who require a more extensive surgery to address their pathology such as in those with signiﬁcant ligamentous laxity or those with pantrapezial arthritis.

& OUTCOMES Outcomes of arthroscopic debridement and resurfacing have been demonstrated to be comparable to those obtained by traditional procedures (1,2,4). We previously reported on 17 patients who underwent the described procedure with interposition of a human acellular dermal matrix graft (Graftjacket w, Wright Medical Technology, Arlington, Tennessee, U.S.A.). At an average follow-up of 14 months, all patients reported improvements in the level of pain symptoms, and 94% stated that they were satisﬁed or somewhat satisﬁed with the procedure. No major complications were observed, and no radiographic evidence of subsidence was noted. Postoperatively one patient was dissatisﬁed. This patient had a postoperative ulnar neuropathy presumed to be related to his axillary block anesthesia. Likewise, Swafford (4) described his experience with a similar technique, which differs by pin ﬁxation longitudinally through the implant

Treatment of Arthritis with Soft-Tissue Interposition & 271

UCL

(A)

MIII AOLd

POL

MII

AOLs

MI

POL

IML

DRL DRL 1-U APL APL

Td Tm

C S

EPB ECRL

(B)

FIGURE 7 Artist’s rendition demonstrates the 1-U portal and the anatomic features viewed from the dorsal aspect of the ﬁrst CMC joint. Abbreviations: APL, abductor pollicis longus tendon; C, capitate bone; DRL, dorsoradial ligament; ECRL, extensor carpi radialis longus tendon; IML, intermetacarpal ligament; MI, ﬁrst metacarpal; MII, second metacarpal; MIII, third metacarpals; POL, posterior oblique ligament; Td, trapezoid; Tm, trapezium. Source: From Refs. 3, 6. Courtesy of Mayo.

MI

UCL AOLd

POL

Tm

FIGURE 6 (A) Schematic of the 1-R portal and the viewing area. (B) Artist’s rendition of the arthroscopic view from the 1-R portal. Abbreviations: AOLd, deep anterior oblique ligament; AOLs, superﬁcial anterior oblique ligament; APL, abductor pollicis longus tendon; DRL, dorsoradial ligament; EPB, extensor pollicis brevis tendon; MI, ﬁrst metacarpus; POL, posterior oblique ligament; Tm, trapezium; UCL, ulnar collateral ligament. Source: From Refs. 3, 6. Courtesy of Mayo.

& SUMMATION POINTS

Indications &

&

Patients with Eaton stages II or III symptomatic trapeziometacarpal joint arthritis recalcitrant to nonsurgical management Signiﬁcant ligamentous laxity and pantrapezial arthritis should be absent

Outcomes &

and joint, and thermal capsular plication. In his series, 90% of patients had good to excellent results.

&

Comparable to those previously documented in open procedures such as ligament reconstruction and tendon interposition Advantages include preserving capsular and ligamentous structures, preserving bone stock, and the minimally invasive nature of the technique

& SUMMARY In conclusion, the described technique of arthroscopic interposition arthroplasty is a minimally invasive technique that represents a viable surgical option for management of the appropriate patient with refractory trapeziometacarpal arthritis.

Complications & & &

Generally rare, but may include graft reaction and graft extrusion Infrequent nerve or vessel injury Failure due to inappropriate patient selection

272 & Adams and Steinmann

UCL

(A)

AOLd

(A)

POL

AOLs

DRL

APL

(B)

EPB

(B)

MI

d AOL

AOLs

FIGURE 10 (A) Preoperative radiograph demonstrating the arthritic ﬁrst CMC joint. (B) Postoperative radiograph at three months follow-up shows preservation of the joint space.

Tm

& REFERENCES 1. FIGURE 8 (A) Schematic of the 1-U portal and the viewing area. (B) Artist’s rendition of the arthroscopic view from the 1-U portal. Abbreviations: AOLd, deep anterior oblique ligament; AOLs, superﬁcial anterior oblique ligament; APL, abductor pollicis longus tendon; DRL, dorsoradial ligament; EPB, extensor pollicis brevis tendon; MI, ﬁrst metacarpus; POL, posterior oblique ligament; Tm, trapezium; UCL, ulnar collateral ligament. Source: From Refs. 3, 6. Courtesy of Mayo.

2. 3. 4. 5. 6. 7. 8. 9.

10. FIGURE 9 Intraoperative view of the biconcave arthritic trapezium. The 3.5-mm arthroscopic burr is utilized to resect the distal trapezium.

11.

Adams JE, Merten SM, Steinmann SP. Arthroscopic interposition arthroplasty of the trapeziometacarpal joint. American Society for Surgery of the Hand, 59th Annual Meeting, New York, NY, September 8–11, 2004. Adams JE, Merten SM, Steinmann SP. Arthroscopic interposition arthroplasty of the ﬁrst carpometacarpal joint. J Hand Surg [Br] 2007; 32(3):268–74. Adams JE, Berger RA, Steinmann SP. Arthroscopic partial trapeziectomy and interposition arthroplasty of the thumb carpometacarpal joint. J Am Soc Surg Hand 2005; 5:115–22. Swafford A. Arthroscopic resurfacing of the basilar joint of the thumb. Arthroscopy Association of North America, 24th Annual Meeting, Vancouver, BC, May 14–17, 2005. Ashwood N, Bain GI, Fogg Q. Results of arthroscopic debridement for isolated scaphotrapeziotrapezoid arthritis. J Hand Surg 2003; 28A:729–32. Berger RA. A technique for arthroscopic evaluation of the ﬁrst carpometacarpal joint. J Hand Surg 1997; 22A:1077–80. Menon J. Arthroscopic evaluation of the ﬁrst carpometacarpal joint. J Hand Surg 1998; 23A:757 (comment). Biddulph SL. The extensor sling procedure for an unstable carpometacarpal joint. J Hand Surg 1985; 10A:641–5. Mureau MA, Rademaker RP, Verhaar JA, Hovius SE. Tendon interposition arthroplasty versus arthrodesis for the treatment of trapeziometacarpal arthritis: a retrospective comparative followup study. J Hand Surg 2001; 26A:869–76. Menon J, Schoene HR, Hohl JC. Trapeziometacarpal arthritisresults of tendon interpositional arthroplasty. J Hand Surg 1981; 6A:442–6. Menon J. Arthroscopic management of trapeziometacarpal joint arthritis of the thumb. Arthroscopy 1996; 12:581–7.

Treatment of Arthritis with Soft-Tissue Interposition & 273 12. Nylen S, Johnson A, Rosenquist AM. Trapeziectomy and ligament reconstruction for osteoarthrosis of the base of the thumb. A prospective study of 100 operations. J Hand Surg 1993; 18B:616–9. 13. Nusem I, Goodwin DR. Excision of the trapezium and interposition arthroplasty with gelfoam for the treatment of trapeziometacarpal osteoarthritis. J Hand Surg 2003; 28B:242–5. 14. Lins RE, Gelberman RH, McKeown L, Katz JN, Kadiyala RK. Basal joint arthritis: trapeziectomy with ligament reconstruction and tendon interposition arthroplasty. J Hand Surg 1996; 21A:202–9. 15. Eaton RG, Glickel SZ, Littler JW. Tendon interposition arthroplasty for degenerative arthritis of the trapeziometacarpal joint of the thumb. J Hand Surg 1985; 10A:645–54. 16. Trumble TE, Raﬁjah G, Gilbert M, Allan CH, North E, McCallister WV. Thumb trapeziometacarpal joint arthritis: partial trapeziectomy with ligament reconstruction and interposition costochondral allograft. J Hand Surg 2000; 25A:61–76. 17. Thomsen NO, Jensen CH, Nygaard H. Weilby-Burton arthroplasty of the trapeziometacarpal joint of the thumb. Scand J Plast Reconstr Surg Hand Surg 2000; 34:253–6. 18. Pellegrini VD, Jr., Burton RI. Surgical management of basal joint arthritis of the thumb. Part I. Long-term results of silicone implant arthroplasty. J Hand Surg 1986; 11A:309–24. 19. Burton RI, Pellegrini VD, Jr. Surgical management of basal joint arthritis of the thumb. Part II. Ligament reconstruction with tendon interposition arthroplasty. J Hand Surg 1986; 11A:324–32.

20. Belcher HJ, Zic R. Adverse effect of porcine collagen interposition after trapeziectomy: a comparative study. J Hand Surg 2001; 26B:159–64. 21. Jones NF, Maser BM. Treatment of arthritis of the trapeziometacarpal joint with trapeziectomy and hematoma arthroplasty. Hand Clin 2001; 17:237–43. 22. Beniker D, McQuillan D, Livesey S, et al. The use of acellular dermal matrix as a scaffold for periosteum replacement. Orthopedics 2003; 26:s591–6. 23. Adams JE, Steinmann SP. Interposition arthroplasty using an acellular dermal matrix: a histological, vascular, and radiographic study in rabbits. Acta Ortho Belgica, in press. 24. Adams JE, Reach JS, Zobitz ME, et al. Rotator cuff repair using an acellular dermal matrix graft: a canine study. Arthroscopy 2006; 22(7):700–9 25. Brown GD, III, Roh MS, Strauch RJ, Rosenwasser MP, Ateshian GA, Mow VC. Radiography and visual pathology of the osteoarthritic scaphotrapezio-trapezoidal joint, and its relationship to trapeziometacarpal osteoarthritis. J Hand Surg 2003; 28A:739–43. 26. Gonzalez MH, Kemmler J, Weinzweig N, Rinella A. Portals for arthroscopy of the trapeziometacarpal joint. J Hand Surg 1997; 22B:574–5. 27. Orellana MA, Chow JCY. Arthroscopic visualization of the thumb carpometacarpal joint: introduction and evaluation of a new radial portal. Arthroscopy 2003; 19:583–91.

Part VII: Nerve Compression

35 Endoscopic Carpal Tunnel Release: The Single-Portal Mirza Technique Tamara D. Rozental, Charles S. Day, and Orrin I. Franko

Department of Orthopedic Surgery, Beth Israel Deaconess Medical Center, Harvard Medical School, Boston, Massachusetts, U.S.A.

& INTRODUCTION

& CONSIDERATIONS FOR PREOPERATIVE PLANNING

Carpal tunnel syndrome is the most common compression neuropathy in the upper extremity. Patients failing conservative treatment with splinting and/or corticosteroid injection often require surgical release to alleviate the paresthesias and numbness which characterize the disease. The ﬁrst carpal tunnel release was performed in 1924 by Herbert Galloway (1). Since then, a variety of incisions have been described to visualize the transverse carpal ligament (TCL) and avoid injury to the underlying median nerve. Open carpal tunnel release continues to be the gold standard for decompression of the median nerve but reports of pillar pain and prolonged discomfort over the palmar incision have led to the development of endoscopic techniques. There are two main endoscopic approaches for carpal tunnel release: single- or double-portal techniques. This chapter reviews endoscopic carpal tunnel release through the Mirza single-portal distal entry technique. This uniportal technique was developed after reports of injuries to anatomic structures at the distal aspect of the TCL and allows direct visualization of the superﬁcial palmar arch, median nerve, and ﬂexor tendons (2).

See discussion in Chapter 36.

& SURGICAL TECHNIQUE & Positioning The patient is positioned supine with the wrist in neutral position. Two initial lines of incisions are drawn: one longitudinal in line with the third web space and the other transversely across the radially abducted thumb. A 1.5 cm incision is marked from the intersection of these two lines proximally. An additional marker for the incision is the ulnar border of the ﬂexed ring ﬁnger which should lie within the 1.5 cm incision. Two additional longitudinal lines are drawn in the distal forearm: one radial to the ﬂexor carpi ulnaris tendon and the other along the palmaris longus tendon. The midpoint between these lines is marked with an “x” to aim the cannula between the median and ulnar neurovascular bundles (Fig. 1).

& Technique & INDICATIONS The indications for the Mirza carpal tunnel release technique are generally the same as those open carpal tunnel surgery. They include a clinical diagnosis of median nerve compression at the carpal tunnel in patients (1) failing conservative treatment or (2) with thenar weakness or atrophy. Authors disagree on absolute contraindications to endoscopic carpal tunnel release. Reported contraindications to date include: & & & & & & & & & & &

Need for extensive neurolysis or tenosynovectomy Mass in the carpal canal Inﬂammatory arthritis (due to increased risk of aggravating the inﬂammatory process) Peripheral neuropathy Anatomic abnormalities Vasospastic disorders Prior carpal tunnel release Thenar weakness requiring tendon transfer Pregnancy (due to excessive weight gain and edema) Dupuytren’s contracture or other conditions limiting ﬁnger or wrist extension Patients on anticoagulant therapy.

The skin is incised and the edges are undermined. A Ragnell retractor is placed on either side of the incision and the skin edges are retracted, pulling the palmar fascia away from the underlying neurovascular bundle. The palmar fascia is divided longitudinally to expose the midpalmar fat. The median nerve, superﬁcial palmar arch, and TCL are then identiﬁed (Fig. 2). The retractors are repositioned to include the palmar fascia. A path is then created by blunt dissection (with a blunt hemostat) between the TCL and the contents of the carpal canal, aiming ulnarly towards the “x” in the distal forearm. The forearm is then elevated and the wrist extended over a bolster to introduce the dissector (A.M. Surgical, Smithtown, New York). The dissector is aimed between the two lines marked on the forearm. Once the pathway is created with the dissector, a dissecting obturator is introduced (Fig. 3). The tip of the obturator should rest against the undersurface of the TCL at all times. Once the cannula tip is palpable through the skin beneath the “x”, the obturator is removed and the cannula is left in place with the slot facing slightly ulnar. A standard 4 mm 308 endoscope is introduced through the slotted cannula and oriented toward the slot (Fig. 4A,B). The TCL is visualized through the endoscope and any remaining tenosynovium is removed with the dissecting obturator (Fig. 5). The median nerve is visualized by rotating the cannula radially (Fig. 6).

276 & Rozental et al.

higher rates of complications encountered with the endoscopic technique, particularly in its early stages. Mirza initially reported on 280 cases of endoscopic releases using the above described technique. Mean grip strength approached preoperative values by the fourth postoperative week and patients returned to work at a mean of 14 days after surgery. No patients reported pillar pain or scar tenderness (2). Multiple prospective randomized trials comparing open with endoscopic carpal tunnel release have since been performed. Trumble et al. performed a multicenter randomized trial using the single-portal Agee technique and a traditional open carpal tunnel release (3). They found that patients treated with the endoscopic release had better functional outcomes in the ﬁrst three months after surgery and returned to work at a faster rate. These ﬁndings, however, have not been consistent throughout the literature. Other randomized trials have reported similar outcomes and return to work times in both patient groups (4,5). In addition, some series have reported higher rates of reoperation in patients treated with endoscopic carpal tunnel release, negating the positive effect of a faster return to activities of daily living. A meta-analysis of 13 randomized controlled trials was published in 2004 (6). The study supported the conclusion that scar tenderness and grip strength were better in patients treated with endoscopic techniques. They also found a higher rate of reversible nerve injuries among these patients. The results in terms of pain and return to work were inconclusive (6). To date, no randomized studies have been published comparing the Mirza technique with open carpal tunnel release. FIGURE 1 The 1.5 cm incision is marked and two additional longitudinal lines are drawn in the distal forearm. The midpoint between these lines is marked with an “x” to aim the cannula between the median and ulnar neurovascular bundles.

Once proper cannula placement is veriﬁed, the cannula is once again rotated ulnarly to visualize the TCL and the ﬂexor tendons (Fig. 7). Once a clear view of the TCL is obtained, the endoscope is removed and a mounting blade is attached to the end of the scope with a locking device (Fig. 8). The TCL is divided by advancing the blade under direct endoscopic visualization through the cannula from distal to proximal (Fig. 9A,B). The TCL division is complete when the blade is palpable through the skin in the distal forearm, proximal to the wrist ﬂexion crease. The blade can then be removed and the endoscope reinserted to visualize the divided edges of the TCL (Fig. 10). The median nerve and ﬂexor tendons can also be visualized by rotating the cannula radially and ulnarly, respectively. Finally, the endoscope is removed and the obturator re-inserted. The entire assembly is then brought out together.

& Closure Following irrigation and hemostasis, the skin is closed with interrupted sutures. A soft compressive dressing is then applied.

& OUTCOMES AND RESULTS Since the introduction of endoscopic carpal tunnel release, the hand surgery literature has seen the proliferation of articles reporting on the results, outcomes, and complications of the technique. Enthusiasts emphasize lower postoperative morbidity, better functional outcomes in the short term, and a reduced period of disability. Opponents have focused on the

& COMPLICATIONS Reported complication rates using the endoscopic technique range from 0.2% to 5% (7). Many of the more dramatic complications, however, occurred during the early development stages of the technique and have been addressed by changes in the design of the instrumentation. The original Agee technique resulted in several cases of nerve transection (8). Since then, the blade assembly has been redesigned and a large multicenter trial using the new device found a complication rate of 1.8% (9). Due to incomplete visualization of the TCL, Chow modiﬁed his original transbursal technique to an extrabursal insertion point. Nagle compared the two methods and found that the complication rate of 11% using the original technique dropped to 2.2% once the new insertion point was utilized (10). Injury to anatomic structures at the distal aspect of the TCL lead Mirza to develop a uniportal technique allowing direct visualization of the superﬁcial palmar arch, median nerve, and ﬂexor tendons. During his early experience, Mirza reported two cases of transient ulnar nerve neuropraxia. In addition, one patient sustained a partial transaction of the median nerve repaired at the time of surgery and the other patient had an incomplete release of the TCL requiring reoperation. After redesigning the instrumentation, a more recent report of 475 patients revealed one case of reﬂex sympathetic dystrophy, one transient neuropraxia, and one blade failure (11). There are varying reports in the literature regarding conversion of endoscopic carpal tunnel release to open procedures. Saw et al. reported a 12% conversion rate secondary to fogging of the lens during the procedure and incomplete visualization of the TCL (8). Other authors have reported a conversion rate of 2% (Mirza).

The Single-Portal Mirza Technique & 277

FIGURE 2 Following skin incision, the skin edges are retracted, pulling the palmar fascia away from the underlying neurovascular bundle. The median nerve (asterisk), superﬁcial palmar arch (white arrow) and transverse carpal ligament (black arrow) are then identiﬁed.

(A)

(B)

Disposable knife

Cannula FIGURE 3 The dissector is aimed between the two lines marked on the forearm. Once the pathway is created with the dissector, a dissecting obturator is introduced.

Locking device

FIGURE 4 (A) A standard 4 mm 308 endoscope is introduced through the cannula. (B) The disposable knife, cannula, and locking device unassembled.

278 & Rozental et al.

FIGURE 8 The mounting blade is attached to the end of the scope with a locking device. FIGURE 5 The transverse carpal ligament is visualized through the endoscope.

(A)

FIGURE 6 The median nerve is visualized by rotating the cannula radially.

FIGURE 7 The cannula can be rotated ulnarly to visualize the transverse carpal ligament and the ﬂexor tendons.

(B)

FIGURE 9 (A,B) The transverse carpal ligament L is divided by advancing the blade under direct endoscopic visualization through the cannula from distal to proximal.

The Single-Portal Mirza Technique & 279

& CONCLUSIONS Endoscopic carpal tunnel release continues to generate interest among hand surgeons and patients alike. Despite worrisome reports of complications in the initial stages, modiﬁcations to the surgical techniques and instrumentation have yielded improved clinical results. The Mirza technique allows direct visualization of the distal edge of the TCL, where most complications occur. Published series have revealed excellent patient satisfaction but randomized trials comparing the distal uniportal technique with open techniques as well as to other endoscopic techniques are needed to validate the outcomes of these studies.

& SUMMATION POINTS

Indications FIGURE 10 The blade is removed and the endoscope reinserted to visualize the divided edges of the transverse carpal ligament.

& & &

Same as for open procedure Failure of conservative treatment Thenar weakness or wasting

Contraindications To date, the following complications have been reported with endoscopic carpal tunnel release: &

&

& & &

&

Injury to the median nerve: Dheansa and Belcher 4reported two cases of median nerve injury using the original Agee technique in patients under general anesthesia (12). Injury to the ulnar nerve: cases of ulnar nerve transaction have been reported using the Chow two-portal technique. This type of injury is thought to be the result of entry into Guyon’s canal instead of the carpal canal, or of looping under the neurovascular bundle (13,14). More common perhaps are cases of transient ulnar nerve neuropraxia. Injury to digital nerves: these range from transient digital nerve neuropraxia to complete nerve transaction (15). Injury to superﬁcial palmar arch (16). Injury to the ﬂexor tendons: this was originally described in a patient with arthritic contractures who was unable to fully extend the wrist and metacarpophalangeal joints. The ﬂexor digitorum superﬁcialis to the ring ﬁnger was found to be tethered around the arthroscopic sheath (17). Incomplete transection of the TCL leading to recurrence of symptoms and reoperation (7).

& PEARLS AND PITFALLS We have attempted over 40 Mirza single-portal endoscopic carpal tunnel releases in our practice thus far. To avoid complications, the insertion of the blunt hemostat, elevator, and dissecting cannula under the TCL is always performed gently and without signiﬁcant force. If resistance is met at any point in the process, the procedure is converted to an open carpal tunnel release. We also actively identify the recurrent motor branch to ensure that it is not at risk along the radial side of the incision. In addition, when inserting the dissecting cannula proximally and ulnar into the distal forearm, care must be taken to avoid compressing the recurrent motor branch against the proximal aspect of the cannula. At present, our conversion rate to open carpal tunnel release is approximately 20%. Following these careful guidelines, we have not had any complications to date.

& & & & & & & &

Space-occupying lesions Limited wrist or ﬁnger extension Congenital wrist anomalies Any factor affecting the anatomy of the carpal canal Pregnancy Inﬂammatory arthritis (relative) Prior carpal tunnel release (relative) Patients on anticoagulant therapy (relative)

Outcomes & & & &

Similar outcome to other endoscopic or open carpal tunnel release Grip strength approached preoperative values by the fourth postoperative week Return to work at a mean of 14 days after surgery No pillar pain or scar tenderness

Complications & & &

Transient neuropraxia Reﬂex sympathetic dystrophy Blade failure

& REFERENCES 1. 2. 3.

4. 5. 6.

Amadio PC. The ﬁrst carpal tunnel release? J Hand Surg 1995; 20B:40–1. Mirza MA, King ET, Tanveer S. Palmar uniportal extrabursal endoscopic carpal tunnel release. Arthroscopy 1995; 11(1):82–90. Trumble TE, Diao E, Abrams RA, Gilbert-Anderson MM. Singleportal endoscopic carpal tunnel release compared with open release: a prospective, randomized trial. J Bone Joint Surg 2002; 84A:1107–15. Ferdinand RD, MacLean JGB. Endoscopic versus open carpal tunnel release in bilateral carpal tunnel syndrome. J Bone Joint Surg 2002; 84B:375–9. MacDermid JC, Richard RS, Roth JH, King GJK. Endoscopic versus open carpal tunnel release: a randomized trial. J Hand Surg 2003; 28A:475–80. Thoma A, Veltri K, Haines T, Duku E. A meta-analysis of randomized controlled trials comparing endoscopic and open carpal tunnel decompression. Plast Reconstr Surg 2004; 114:1137–46.

280 & Rozental et al. 7. 8.

9. 10. 11.

Chow JCY, Hantes ME. Endoscopic carpal tunnel release: thirteen years’ experience with the Chow technique. J Hand Surg 2002; 27A:1011–8. Saw NLB, Jones S, Shepstone L, Meyer M, Chapman PG, Logan AM. Early outcomes and cost-effectiveness of endoscopic versus open carpal tunnel release: a randomized prospective trial. J Hand Surg 2003; 28B:444–9. Agee JM, McCarroll HRJ, Tortosa RD, et al. Endoscopic release of the carpal tunnel: a randomized prospective multicenter study. J Hand Surg [Am] 1992; 17:987–95. Nagle DJ. A multicenter prospective review of 640 endoscopic carpal tunnel releases using the transbursal and extrabursal chow techniques. Arthroscopy 1996; 12(2):139–43. Mirza MA, King ET. Newer techniques of carpal tunnel release. Orthop Clin North Am 1996; 27(2):355–71.

12. Dheansa BS, Belcher HJ. Median nerve contusion during endoscopic carpal tunnel release. J Hand Surg 1998; 23B:110–1. 13. Del Pinel F, Cruz-Camara A, Jado E. Ulnar nerve transection as a complication of two-portal endoscopic carpal tunnel release: a case report. J Hand Surg 1993; 18A:896–8. 14. Nath RK, Mackinnon SE, Weeks PM. Ulnar nerve transaction during endoscopic carpal tunnel release. J Hand Surg 1993; 18:896–8. 15. Jeon IH, Kim PT, Park IH, Park BC, Ihn JC. High bifurcation of median nerve at the wrist causing common digital nerve injury in endoscopic carpal tunnel release. J Hand Surg 2003; 27B:580–2. 16. Brown RA, Gelberman RH, Seiler JGR, et al. Carpal tunnel release. A prospective, randomized assessment of open and endoscopic methods. J Bone Joint Surg Am 1993; 75:1265–75 (see comments). 17. Scoggin JF, Whipple TL. A potential complication of endoscopic carpal tunnel release. Arthroscopy 1992; 8:363–5.

36 Endoscopic Carpal Tunnel Release: Chow Technique James C.Y. Chow

Orthopaedic Center of Southern Illinois, Mount Vernon, Illinois, U.S.A.

Athanasios A. Papachristos

Orthopaedic Research Foundation of Southern Illinois, Mount Vernon, Illinois, U.S.A.

& INTRODUCTION & History Carpal tunnel syndrome was recognized by Sir James Paget in 1854 as a median nerve compression following a fracture of the distal radius (1,2). Later in 1880, James Putman, a neurologist from Boston, reported the symptoms suffered by a group of his patients (3) which would be considered as a description of a classic carpal tunnel syndrome today. The ﬁrst formal description of the surgical release of transverse carpal ligament for the treatment of this pathologic condition was reported in 1933 (4) followed by Phalen’s classic article in 1950 (5). Since that time, open carpal tunnel release has been established as the gold standard for the surgical treatment of carpal tunnel syndrome.

& Evolution of the Chow Technique Dr. James C.Y. Chow began working on endoscopic release of the transverse carpal ligament in 1985, unaware that both Dr. Ichiro Okutsu in Japan and Dr. John Agee in California were working on similar aims at approximately the same time. The primary motivation of Dr. Chow’s concept was to create a method for the surgical treatment of carpal tunnel syndrome that could be able to preserve normal anatomic structures of the wrist and hand by minimizing the surgical wound and thus, resulting in a better clinical outcome. Through persistent trials and different approaches, a slotted cannula was developed late in 1986. Following several months of repetitive practice on cadaveric hands, the procedure was completed in May 1987 and it was ﬁrst performed in a patient in September of the same year. There have been some modiﬁcations of the original procedure since its conception. The ﬁrst two reports in the literature on the topic of endoscopic carpal tunnel release, written by Chow and Okutsu et al. separately, were published in the March issue of Arthroscopy Journal in 1989 (6,7). In the next year, Chow presented a conference paper based on his clinical results after endoscopic carpal tunnel release in 149 cases at the 1990 AANA Annual Meeting in Orlando, Florida (8). In the fall of the same year, another conference paper by Agee et al. (9) was presented at the 1990 American Society for Surgery of the Hand Annual Meeting in Toronto, Canada, regarding the clinical results of a multicenter study with the use of the Agee technique for the endoscopic release of the carpal ligament. Therefore, three different surgical techniques were developed in distinct locations worldwide aiming at the same idea of minimal incision in the palm region for the surgical treatment of carpal tunnel syndrome. The common denominator of these three procedures is that they all utilize the current

technology in order to bring visualization of the surgery to a video monitor with the use of a camera. Since the publishing of the three original endoscopic carpal ligament release techniques, there has been an increasingly continuous interest and also, a lot of debate among surgeons regarding the safety and efﬁcacy of endoscopic procedure versus the open one. Several modiﬁcations and variations to the three original ideas have been made since their initial demonstration (10,11).

& INDICATIONS Whenever a surgeon deals with a pathologic situation that has to be managed surgically, speciﬁc criteria must be kept in mind in order to designate the most appropriate surgical technique. These criteria include indications–contraindications, exposure and visualization of the related anatomical structures, reproducibility, a reasonable learning curve, and an acceptable complication rate. Endoscopic carpal tunnel release does have the potential to become a dangerous procedure if performed by inexperienced surgeons (12–15). Considerable intraoperative complications have been reported throughout the United States by surgeons who have used this technique (16–19). This situation has raised a controversy among surgeons regarding the value of endoscopy for carpal tunnel surgery. However, it has also been shown that endoscopic carpal ligament release can be performed safely by experienced surgeons, although its learning curve is steep sometimes, and can give both the patient and the surgeon a great deal of satisfaction (20). The safety of this procedure seems to have improved not only due to the surgical experience that has been gained but also due to the instrumentation that has been developed and the better knowledge of the endoscopic anatomy. The indications for the open surgical release of transverse carpal tunnel ligament have been well established and, in most cases, they apply to endoscopic carpal tunnel release. In most cases, previous conservative management by means of wrist splinting, alteration of daily activities, physical therapy, and nonsteroidal anti-inﬂammatory oral medication have failed. A previous performed open surgical release of the carpal ligament was not considered to be a contraindication for the endoscopic procedure. Contraindications to the endoscopic procedure include space-occupying lesions, limited wrist extension, congenital wrist anomalies, and any factor that affects the anatomy of the region. Rheumatoid patients with abundant tenosynovium should be managed with caution as well as patients who had previously sustained a fracture of the hook of hamate. These and other conditions that require direct visualization of the carpal canal are relative contraindications (21,22). Obesity, diabetes, and a previous performed open

282 & Chow and Papachristos

carpal tunnel release are not considered to be contraindications for the endoscopic release of the carpal ligament. During the endoscopic procedure, if any pathology or anatomic variation is detected which either limits the view or obstructs the access into the carpal canal, the surgeon should convert to an open procedure. The patient should be well informed before surgery of a possible conversion because of the aforementioned reasons. The advantages of endoscopic over open carpal tunnel release include no hypertrophic scar or scar tenderness, no pillar pain, less compromise to the pinch or grip strength, and an earlier return-to-work and daily activities. However, the surgeon can be in front of unexpected difﬁculties, e.g., ganglion, neuroﬁbroma, and neurilemmoma, that limit visualization into the carpal canal. As in any surgical procedure, safety and success are dependent upon a thorough knowledge of the anatomy of the area, adequate training, and familiarity with the use and capabilities of the instrumentation. Surgeons who are not familiarized with endoscopes and arthroscopic techniques may give rise to major iatrogenic complications.

& CONSIDERATIONS FOR PREOPERATIVE PLANNING Carpal tunnel syndrome is a compression neuropathy of the median nerve at the wrist and due to its incidence it counts for approximately 463,673 carpal tunnel releases performed annually in the United States (23,24). Patients who have developed this syndrome usually present with a typical history of characteristic symptoms such as nocturnal pain and paresthesias, numbness to the distribution of the median nerve distal to the wrist, and weakness of the thenar muscles. Although history is very important in the diagnosis of carpal tunnel syndrome, the physician should also be aware about the patient’s general health condition and family history. Congenital diseases or anomalies, diseases of the connective tissue, systemic and metabolic disorders, and a previous sustained injury to the distal forearm and wrist should be taken under consideration. A malunited fracture of the distal radius, previously performed surgery in the wrist area, and a hypoplastic or aplastic hook of the hamate (25) can produce difﬁculties while the surgeon is trying to access the carpal canal with the use of the custom designed surgical instrumentation. Physical examination will assist in the patient evaluation. In an acute case, there is tenderness along the carpal canal area. Light percussion over the median nerve at the wrist area produces a “passing of electric current” sensation that radiates to the median nerve distribution known as Tinel’s sign. Phalen’s sign is evoked by holding the wrists at maximum ﬂexion and the dorsal aspects of the hands in full contact like a “reverse praying” position. This position narrows the carpal canal and if reproduces the paresthesias in the ﬁngers within 60 seconds, the sign is considered positive. As the pathological condition advances, less time is necessary to evoke a response. Other examinations include the monoﬁlament test, two-point discrimination, reverse Phalen’s test, and tourniquet test. In the late stages, with thenar muscle atrophy, one can observe the muscle waste in the thenar area (26–28). Muscle weakness is tested subjectively by resisted palmar abduction of the thumb against the examiner’s index ﬁnger, and comparison of one hand to the other. A carefully performed physical examination as well as the previous taken history will both help the physician to distinguish between an isolated compression neuropathy at the wrist and a double crush syndrome (29). Clinical correlation of the double crush phenomenon has been demonstrated by the high incidence of concurrent carpal

syndrome in patients with cervical radiculopathy (30,31). An equally high incidence of association of carpal tunnel syndrome and a more proximal entrapment of the median nerve has also been reported (32). Therefore, the physician must exclude the possibility of thoracic outlet syndrome, pronator compression syndrome in the forearm, and even a central nervous system disease (33–35). Electromyography and nerve conduction velocity (NCV) tests will also assist for the detection of carpal tunnel syndrome. Indications for surgery should not be decided or altered according to the results of NCV tests, especially when the results are normal but the patient has the clinical signs and symptoms of the syndrome (36–40). A delay of the distal latency of the median nerve of 7.0 msec or longer represents signiﬁcant compression of the median nerve; if present, surgery should be considered without further delay. The most important aspects in diagnosing carpal tunnel syndrome are the history and physical examination. Electrodiagnostic studies of the median nerve are adjunct used to conﬁrm the diagnosis and perhaps suggest how the patient will respond to surgery. Wrist radiography can rule out any possibility of congenital or acquired bone and joint deformity, abnormality, or pathology. Previous sustained fractures of the distal forearm and wrist should be taken under consideration. Standard anteroposterior and lateral views of the distal forearm–wrist and a tunnel view of the wrist are required, either to detect or put the examiner under skepticism for further investigation of the aforementioned conditions. If a more extensive study is indicated, magnetic resonance imaging, computed tomography scan ultrasound bone scan, and arthrogram of the wrist may be necessary (41–43).

& SURGICAL TECHNIQUE Initially, the original technique was described by Chow as a transbursal approach to the carpal tunnel requiring penetration of the ulnar bursa (6,44). Due to the results of a multicenter study (45,46), the original technique has been modiﬁed in an attempt to decrease the complications and the learning curve. The conversion to an extrabursal technique has made the surgical procedure much easier and safer offering a better visualization of the proximal transverse carpal ligament (47–49). The following is a description of the extrabursal, dual-portal technique.

& Operating Room Setup The patient is placed in a supine position and a hand table is used. Two video monitors are preferred, although some surgeons can manage the procedure with only one. One of the two monitors should face the surgeon and the other should face the assistant. The surgeon sits on the ulnar side of the patient and the assistant faces the surgeon (Fig. 1A). The arthroscopic equipment consists of a short 4.0 mm ! 308 video-endoscope that prevents light guide from interfering with the patient’s forearm by having the light post on the same side as the direction of view, a camera apparatus, a light cord, a camera input device, and a light source device (Fig. 1B). Optional equipment includes a DVD video recorder and a video printer for the printing of any captured images. Water pump and shaver equipment is not used. A standard handset should be available. Speciﬁc instrumentation for the procedure, designed by Dr. Chow, comprises an ECTRAe System Kit and an ECTRAe Disposable Kit (Smith & Nephew Endoscopy, Andover, Massachusetts, U.S.A.).

Endoscopic Carpal Tunnel Release: Chow Technique & 283 (B) (A)

Light cord

VideoEndoscope

Camera

Camera input device

Light source device

FIGURE 1 (A) Operating room setup for the endoscopic carpal tunnel release using the Chow dual-portal technique. (B) Arthroscopic equipment that is appropriate for the performance of this technique.

The ECTRA System Kit includes the video-endoscope, slotted cannula, dissecting obturator, curved blunt dissector, palmar arch suppressor, probe, retractors, and hand holder (Fig. 2). The dissecting obturator is attached with a detachable handle that can also take some other types of obturators included in the kit (conical, boat-nose obturator), the latter are not being used routinely. The ECTRA Disposable Kit includes a probe knife, a triangle knife, a retrograde knife, a hand pad, and swabs (Fig. 3). These knives allow the surgeon to determine both the direction and depth of cut. Standard preparations and draping are

performed as usual without the application of a tourniquet. Before the introduction of local anesthesia, a skin marker is used to map landmarks for the entry and exit portals.

& Anesthesia Local anesthesia combined with intravenous medication is recommended for the procedure because it allows the patient and the surgeon to communicate. An alert patient can inform the surgeon, during the procedure, about any abnormal sensation in

Curved blunt dissector 4mm x 30˚ Videoendoscope Dissecting obturator Detachable handle

Slotted cannula

Palmar arch suppressor

Probe

Retractors

Hand holder

FIGURE 2 Instrumentation included in the ECTRAe System Kit (Smith & Nephew Endoscopy, Andover, Massachusetts, U.S.A.).

284 & Chow and Papachristos

Cutting edge

Triangle knife

Retrograde knife

Cutting edge

Blunt edge

Probe knife

Cutting edge FIGURE 3 Specially designed knives for the release of the transverse carpal ligament. The tip of each knife is shown in detail (red square) on the right side. This instrumentation is included in the ECTRAe Disposable Kit (Smith & Nephew Endoscopy, Andover, Massachusetts, U.S.A.).

the hand indicating a potential problem caused from any variance of nerve structure in the wrist and palm region (50–56). Usually, when the patient ﬁrst comes into the operating room, fentanyl citrate (Sublimaze; Baxter Healthcare Corporation, Westlake Village, California, U.S.A.) 100 mg is given intravenously. This is a narcotic analgesic type of medication with an onset of seven to eight minutes and a peak action of approximately 30 minutes. Normally, the surgical time does not exceed 10 minutes. Xylocaine 1% (Astra, Westboro, Massachusetts, U.S.A.) without epinephrine is injected at the entry and exit portals, approximately 1 to 2 cc at the entry portal and 5 to 6 cc at the exit portal due to the higher

(A)

degree of sensitivity of the skin on the palmar region. Special care is taken to place the injection only in the skin and to avoid affecting the nerve by penetrating deeply.

& Positioning the Entry Portal The proximal end of the pisiform bone is palpated on the volar surface of the wrist within the ﬂexor carpi ulnaris tendon at the distal wrist ﬂexor crease and is marked with a small circle. A line from the proximal pole of the pisiform is drawn radially, approximately 1.0 to 1.5 cm in length. From this point,

(B)

Proximal pole of pisiform

1-1.5cm

0.5cm

incision 1 cm

FIGURE 4 (A, B) The entry portal is located by drawing a line 1 to 1.5 cm radially from the proximal pole of the pisiform bone, then drawing an approximately 0.5-cm second line proximally from the end of the ﬁrst one, and ﬁnally, an approximately 1-cm third line is drawn radially from the proximal end of the second line to create the entry portal.

Endoscopic Carpal Tunnel Release: Chow Technique & 285

a second 0.5-cm line is drawn proximally. A third dotted line, approximately 1.0 cm in length, is drawn radially from the proximal end of the second line to create the entry portal (Fig. 4). If the palmaris longus muscle is present, the center of the entry portal should be located at the ulnar border of its tendon almost at the level of the proximal wrist ﬂexor crease. Average dimensions of these lines will vary slightly, depending on the overall size of the hand.

& Positioning the Exit Portal The patient’s thumb is placed in full abduction. A line is drawn across the palm from the distal border of the thumb to the approximate center of the palm, perpendicular to the long axis of the forearm. A second line is drawn from the third web space, parallel to the long axis of the forearm, to meet the ﬁrst line. These two lines should form a right angle. A third line is drawn, bisecting this angle and extending approximately 1.0 cm proximally from its vertex, which serves to establish the site of incision for the exit portal (Fig. 5). The surgeon should be able to palpate the hook of hamate. The exit portal should fall into the soft spot at the center of the palm and should line up with the ring ﬁnger, just slightly radial to the hook of hamate.

& Creation of Portals and Placement of the Cannula The procedure begins with the creation of the entry portal. An approximately 1.0 cm transverse incision (Fig. 6A) is made at the marked entry portal site extending just through the skin. Subcutaneous tissue is bluntly dissected off the volar forearm fascia with the use of a hemostat and is retracted with the retractors. Care must be taken to avoid damage to the small subcutaneous blood vessels. A knife is used to make a small longitudinal opening of the antebrachial fascia that is extended distally with the use of a Stephen’s tenotomy scissors (Fig. 6B,C). If the palmaris longus muscle is present, the longitudinal cut should be along the ulnar border of palmaris longus tendon. Care should be taken, as sometimes there are two layers of fascia that both must be cut. Retractors are passed just beneath the fascia with one of them lifting the skin distally to create a vacuum that will separate the transverse carpal ligament from the ulnar bursa. A blunt curved dissector is

gently slipped into the carpal tunnel just under the transverse carpal ligament. Maneuvering the dissector back and forth should result in a type of “washboard” feeling due to the rough undersurface of the carpal ligament. The curved dissector is then removed. A dissecting obturator/slotted cannula assembly unit can now be guided into the space vacated by the curved dissector. The slotted cannula assembly is advanced into the carpal tunnel on the underside of the transverse carpal ligament to the level of the hook of hamate, staying to the ulnar side of the carpal tunnel (Fig. 6D). With the tip of this unit touching the hook of the hamate, the surgeon gently picks up and hyperextends the hand. The hand and cannula assembly are now moved as a unit (Fig. 6E) and placed on the hand holder with the wrist and ﬁngers in full hyperextension. The cannula assembly is advanced along the under surface of the carpal ligament, while the assistant keeps the hand onto the hand holder, until the tip of the cannula assembly can be easily palpated in the palm area where the mark for the exit portal was previously made. A small transverse or oblique incision is made just over the palpable cannula assembly tip cutting only the skin (Fig. 6F). The palmar skin and soft tissue is depressed using the palmar arch suppressor and the cannula assembly is then pushed into the receptacle of the palmar arch suppressor to exit through the distal portal (Fig. 6G). The obturator is then removed from the cannula which should lie just below the transverse carpal ligament and the hyperextended hand is strapped onto the hand holder (Fig. 6H). Hyperextension of the wrist brings the superﬁcial palmar arch to a level lower than the exiting point of the slotted cannula assembly, thereby protecting it from injury. The creation of two portals is very essential, as they serve to stabilize the slotted cannula while it passes through both of them and thus, ensuring the reproducibility of the technique. The slotted portion of cannula allows a safe cutting zone, while delicate structures such as the median nerve and ﬂexor tendons are being protected by the walls of the cannula.

& Endoscopic Examination The video-endoscope is inserted into the slotted cannula at the proximal portal. The camera and scope should rest comfortably in the ﬁrst web space of the surgeon’s hand. A cotton swab can

(B)

(A)

1cm incision 0.5 cm

FIGURE 5 (A, B) The exit portal is located by drawing a line from the distal border of the fully abducted thumb perpendicular to the long axis of the forearm. A second line is drawn from the third web space parallel to the long axis of the forearm. These two lines form a right angle. A third line is drawn, bisecting this angle and extending approximately 1.0 cm from its vertex to determine the exit portal.

286 & Chow and Papachristos (A)

(B)

(C)

(D)

(E)

(F)

(G)

(H)

(I)

FIGURE 6 Step-by-step procedure for the creation of portals and placement of the slotted cannula. (A) Skin incision. (B, C) A small longitudinal opening of the antebrachial fascia is created and is extended distally using a tenotomy scissors. (D) Insertion of the dissecting obturator/slotted cannula assembly into the carpal canal. (E) Placement of the hand onto the hand holder. (F, G) Skin incision and use of the arch suppressor in order for the cannula assembly to exit through the distal portal. (H) The dissecting obturator has been removed leaving the slotted cannula into the carpal canal. (I) The scope is inserted into the carpal canal through the proximal portal.

be inserted into the tube from the distal portal to clean the lens while focus is adjusted to the best visualization. A blunt probe is inserted to palpate the undersurface of the transverse carpal ligament proximally to distally and in case a thin bursal membrane is seen above the cannula’s slotted opening, this is carefully dissected with the probe to gain access to the ligament which has an “ivory type” white appearance with its ﬁbers running transversely (Fig. 7). If the median nerve is present, the patient will feel sharp pain radiating to the ﬁngers when the (A)

nerve is probed and this should alert the surgeon. If abundant soft tissue is noted in the opening of the cannula, the procedure should not be performed. The slotted cannula may need to be reinserted to ensure a better visualization; however, to avoid irreversible damage, surgery should not be carried out if tendons or other important structures are entrapped between the slotted cannula and the undersurface of the carpal ligament. If there is only a minimal amount of synovium obstructing the view, the obturator is replaced into the slotted cannula. (B)

FIGURE 7 (A) Endoscopic normal appearance of the transverse carpal ligament with its ﬁbers running transversely. (B) The thicker bursal membrane that sheaths the undersurface of the proximal portion of carpal ligament has been probed proximally depicting the ﬁbers of ligament.

Endoscopic Carpal Tunnel Release: Chow Technique & 287

The slotted cannula assembly unit can then be rotated radially about 3558 to 3608 to provide the visualization and protection required. It has to be emphasized that surgeons should not hesitate to convert an endoscopic procedure to an open one, if they are not able to obtain adequate visualization.

& Technique for the Release of the Transverse Carpal Ligament With the scope in the proximal portal and the probe in the distal portal, the distal border of the transverse carpal ligament is identiﬁed. The probe knife, which permits forward cutting only, is inserted into the distal portal. The blunt edge of the knife can be used to probe proximally to distally along the ligament. The cutting edge is then used to release the distal border of the ligament by drawing the knife distally to proximally (Fig. 8A). Anything beyond the distal border of the carpal ligament should not be excised. The scope is withdrawn proximally about 1 cm and the triangle knife is used to make a small upward cut in the midsection of the ligament (Fig. 8B). The retrograde knife is now inserted through the distal portal and its blunt tip is gently positioned at the incision made by the triangle knife (Fig. 9B1,B2). The proximal cutting edge of the retrograde knife is drawn distally, making an incision that joins the previous two cuts, thereby completing the release of the distal portion of transverse carpal ligament (Fig. 9B3,B4). The scope is removed from the proximal and inserted into the distal opening of the slotted cannula. The camera view on the screen now forms a mirror effect. The surgeon should realize that the previous ulnar side is now the radial side. By moving the scope proximally and distally, the previous distal cut is identiﬁed. The probe knife is inserted into the proximal portal and is drawn toward the level of the previous distal cut with its blunt tip touching the underside of the transverse carpal ligament, just before the beginning of the distal cut (Fig. 10B1). From this point, the blunt edge of the knife is (A)

used to retract the thick bursal membrane, which sheaths the proximal portion of the carpal ligament, distally to proximally along the ligament’s undersurface (Fig. 10B2). When the cutting edge of the knife has engaged to the proximal border of the ligament, the knife is advanced distally to make an incision that joins the previous cut and thus to accomplish the release of the transverse carpal ligament (Fig. 10B3,B4). This is a slight modiﬁcation of the technique that was described in previous textbooks (49,57) where the retrograde knife was used to complete the release of the ligament. The thick bursal membrane contains small vessels and it should be preserved to avoid bleeding into the carpal canal. Finally, the slotted cannula is gently rotated about a few degrees, clockwise and counterclockwise sequentially, enabling the surgeon to view the edges of the transected carpal ligament. If there are any additional ﬁbers remaining, the triangle knife, or any other knife that feels appropriate, can be used to release these ﬁbers until the surgeon is satisﬁed. Due to the position of the patient’s hand, the cut edges of the transverse carpal ligament should spring apart and disappear from the slotted opening of the cannula. If the edges can still be seen through the opening, the release is incomplete. While the assistant fully abducts the patient’s thumb, the uncut portion of the ligament can be identiﬁed and the surgeon is able to complete the transection. There is a soft-tissue band that bridges the thenar and hypothenar musculature lying volar to the transverse carpal ligament that has to be preserved, as well as the palmaris brevis muscle, if present. This soft-tissue band prevents bowstringing of the ﬂexor tendons after surgery, thereby maintaining their strength during contraction (58–60). Only one suture is required for the closure of each portal. Immediately after the procedure, the surgeon should clinically examine the patient while still in a sterilized environment. If there is any dysfunction indicating intraoperative damage to the median nerve or tendons, exposure and exploration of the carpal tunnel can be performed at the same time.

Probe knife Probe knife

Motor branch of Median N.

Hook of hamate Pisiform Ulnar N. and A. Cannula (B)

Radial A. Median N. Scope

Triangle knife

FIGURE 8 (A) After identifying the distal border of transverse carpal ligament, the probe knife is used to make the ﬁrst cut distally to proximally. (B) The scope is withdrawn proximally about 1 cm and the triangle knife is used to make a small cut in the midsection of transverse carpal ligament.

288 & Chow and Papachristos (A)

(B)

Retrograde knife

1

2

3

4

FIGURE 9 (A, B) The retrograde knife is placed in the incision made by the triangle knife (B1, B2) and it is drawn distally to make an incision that joins the previous two cuts (B3, B4).

Postoperatively, active range of motion is encouraged immediately after the effects of local anesthesia have subsided. The patient is advised to avoid heavy lifting or pressure on the palm region until the discomfort disappears, usually in two to three weeks. Active movement of the ﬁngers decreases the formation of scar tissue in the wrist region and therefore prevents adhesions on the tendons or nerve at the surgical site. Sutures are usually removed in one week. If the patient engages in hard occupational activities, such as heavy lifting, too soon after surgery, there might be swelling and prolonged pain in the palm region. If these occur, ﬂuidotherapy treatment 20 minutes daily helps to decrease the condition within one week.

(A)

& COMPLICATIONS AND THEIR MANAGEMENT Several complications after endoscopic carpal tunnel release with the use of the Chow technique have been reported in the literature (16). Nagle et al. (46) performed a multicenter prospective review study on a total of 640 cases. The initial transbursal technique was used in 110 cases and the modiﬁed extrabursal technique was used in the rest of 530 cases. An overall (perioperative and late) complication rate of 11% was found in the cases that were done with the transbursal technique compared with 2.2% in the cases that were done with the extrabursal technique. There were 21 out of the total 640 cases (3.3%) in which perioperative complications

(B)

Probe knife

Probe knife

1

2

3

4

FIGURE 10 (A, B) Once the scope has been switched from the proximal to the distal opening of slotted cannula, the tip of the probe knife is placed just before the beginning of the distal cut (B1). From this point, the knife’s blunt edge is used to retract the thick bursal membrane distally to proximally (B2). When the knife has engaged to the proximal border of transverse carpal ligament, it is advanced distally to complete the release of the ligament (B3, B4).

Endoscopic Carpal Tunnel Release: Chow Technique & 289

occurred. Fourteen of these 21 cases involved neurapraxia, all of which resolved without sequelae, and no nerves were lacerated or transected. There was one laceration of the superﬁcial ﬂexor tendon of the ring and small ﬁngers, four incomplete releases, and two cases with hematoma and laceration of the superior palmar arch, respectively. Late complications included three cases of reﬂex sympathetic dystrophy (0.5%). This complication resolved in all cases without the use of sympathetic nerve blocks. The authors of this study concluded that endoscopic carpal tunnel release using the dual-portal extrabursal technique reliably decompresses the carpal tunnel and can be effectively performed with low perioperative and late complication rates. Malek and Chow (19) in a national study of the complications of 10,246 cases in 9562 patients using the dual-portal Chow technique found a complication rate of 2.3% (240 cases with complications were reported). Of these, there were 154 nerve-related complications (median or ulnar nerve neurapraxias, lacerations, and transections), 38 complications related to blood vessels, 15 tendon injuries, 18 incomplete releases of the transverse carpal ligament, and 6 reﬂex sympathetic dystrophy complications. The remaining nine were listed as miscellaneous complications, including hematoma or superﬁcial wound infection. The majority of intraoperative nerve injuries occurred in cases where general or regional anesthesia was used. The complication rates of endoscopic carpal tunnel release that have been reported compare favorably with published series of open carpal tunnel release. Complications of the latter include incomplete ligament release, nerve injuries, palmar hematomas, bowstringing of the ﬂexor tendons, adhesions between nerve and tendons, reﬂex sympathetic dystrophy, deep wound infections, scar tenderness, pillar pain, tendon lacerations, and vascular injuries (61–70). Most of the damages to the surrounding anatomical structures that occur during carpal tunnel surgery, either open or endoscopic, usually require a second surgical procedure in order to be repaired. Surgeons, who are interested in performing endoscopic carpal tunnel release, should be aware of the steep learning curve and should realize that many details must be followed to avoid serious iatrogenic complications. Normal wrist anatomy and its variances must be well-known. Visualization is also a critical portion of the procedure. Regardless the etiology, when the surgeon is unable to obtain a clear view of the undersurface of carpal ligament, the endoscopic procedure should be abandoned. A common pitfall is the ulnar placement of the entry portal. To avoid this situation, helpful guidelines have been established for the correct estimation of portal placement. These are based on years’ experience and are as following: 1.

Watch the entire width of the wrist to ensure the central location of the entry portal. 2. Make sure that the landmarks of both the entry and exit portals are aligned along the long axis of forearm. 3. Palpate and mark the hook of hamate. Both portals should be located radially to the hook of hamate. 4. Palpate the pulse of ulnar artery before making the skin incision for the entry portal to avoid damage of the ulnar neurovascular bundle. If a tourniquet is applied and inﬂated, this signiﬁcant guideline is lost. 5. During the entire procedure, surgical instruments that are introduced in the wrist and hand should follow the long axis of the forearm.

& OUTCOMES From September 1987 through April 2005, in Mount Vernon, Illinois, 3536 hands in 2479 patients underwent endoscopic carpal tunnel release using the dual-portal Chow technique. The diagnosis of carpal tunnel syndrome was based on symptoms from the patient’s history, clinical ﬁndings, and NCV tests. Previous conservative management by means of wrist splinting and oral nonsteroidal anti-inﬂammatory medication had failed or the NCV test had revealed a potentially permanent harm to the median nerve. A total of 232 of 2479 patients (9.3%)—or 330 of 3536 wrists (9.3%)—were lost to follow-up evaluation and were excluded from this report. All patients, including those who were lost to follow-up evaluation, visited the ofﬁce at least one time for suture removal one week after surgery. Therefore, the immediate postoperative status of the hand was followedup in all patients. The lost to follow-up group includes all those patients who could not be reached either because they were deceased or had moved without a forwarding address. Thus, the results of this report are based on 2247 patients (3206 wrists). The average age of these patients was 52.3 years (range 14–96 years) and they were 813 males (36.2%) and 1434 females (63.8%). Patients with limited wrist extension associated Dupuytren’s contracture or ulnar nerve entrapment into the Guyon’s canal and also those who had carpal tunnel tumorous like lesions were treated with the open surgical procedure and their results are not included in this report. Patients with bilateral carpal tunnel syndrome were offered surgery at separate sessions. All procedures were done by James C.Y. Chow. The average follow-up period was seven years and eight months (range 4–209 months). The average duration of symptoms before the endoscopic carpal tunnel release was three years and one month (range 1 month to 45 years). Systemic diseases (rheumatoid arthritis, hypothyroidism, lupus, and diabetes) were noted in 210 (9.3%) patients. Previous trauma to the involved extremity was reported in 124 of 3206 (3.8%) cases. Eighty-six patients had recurrent carpal tunnel syndrome after having a previous open procedure. Patients were told to return to work as soon as their symptoms had subsided and this date was used to calculate the return-to-work status in weeks. The return-to-work status was not followed-up to those who were unemployed or retired. Therefore, 1463 (65.1%) patients were followed-up regarding this status. Both preoperative and postoperative grip strength were measured but, due to the geographic distance that some patients would have had to travel, only 635 of the 2247 patients returned to the clinic for a complete evaluation. Grip-strength measurements begun at the ﬁrst postoperative week and were repeated regularly once a week until four weeks after surgery. The numeric data that represent the results from the returnto-work and grip-strength analysis are expressed cumulatively, the latter demonstrating the percentage of patients who retrieved 80% of the mean preoperative grip-strength value. The average operating time was eight minutes (range 5–27 minutes). The operating time was longer than 20 minutes in 23 cases. In these cases, an ulnar transligamental motor branch of the median nerve was noted. Endoscopically, this anatomic variation appeared like a dense longitudinal synovial structure on the dorsal aspect of the transverse carpal ligament containing small vessels that were running within its substance. Veriﬁcation of the existence of a neural branch was performed by touching the synovial structure with the use of a probe and as a consequence, pain was induced radiating on the thenar area. The ratio of this anatomic variation in this series was 1 per 200 cases. Two cases were converted to an open procedure due

290 & Chow and Papachristos (A)

(B)

FIGURE 11 (A) The ﬁrst of the two cases that were converted to an open procedure due to the close proximity of the motor branch of the median nerve (long thin arrow) to the entry portal. (B) In the second case, the communicative branch of the median nerve to the ulnar nerve (short thick arrow) was blocking the exit portal.

to rare anatomic variations in the course of median nerve. Exploration of the carpal canal revealed that the motor branch of the median nerve was extremely proximal in the ﬁrst case (Fig. 11A) and the communicative branch of the median nerve to the ulnar nerve was blocking the exit portal in the second case (Fig. 11B). At the ﬁnal follow-up evaluation, a total of 2990 (93.3%) hands were completely asymptomatic or had minor symptoms after endoscopic carpal tunnel release. None of the patients developed complex regional pain syndrome postoperatively. Twenty-four cases (0.7%) were classiﬁed as failed. Of interest is the fact that four of these patients had a previous open procedure. When an open revision surgery was performed (19 cases), in four cases the carpal ligament was considered incompletely transected, and in the remaining 15 cases abundant scar tissue formation was found in the region of the previously transected carpal ligament. Eighteen cases (0.6%) were classiﬁed as recurrent. The mean time of recurrence was 20 months (range 6–70 months). Nine of these patients were engaged in heavy occupational activities that required constantly repetitive motion of their hands. Endoscopic revision surgery was performed in 11 cases. Initially, when the transbursal approach was used and retractors were placed in a transverse manner (one at the ulnar and the other at the radial side of the surgical wound), two patients developed transient ulnar nerve palsy as a result of pressure to the ulnar neurovascular bundle. Spontaneous recovery took place within four weeks and after ﬁve months, respectively. Since that happened, retractors are placed in a longitudinal manner (one at the proximal and the other at the distal end of the wound). Neither laceration nor transection of any neural, vascular, and tendinous structure was occurred among the 3536 hands. Superﬁcial infection in the proximal surgical wound (entry portal) was developed in three cases. Treatment consisted of oral antibiotics and local wound care. The mean preoperative grip strength of the 635 patients who returned to the ofﬁce for grip-strength testing was 243.68 N (range 19.62–588.60 N). Ninety-ﬁve patients (14.9%) regained 80% (194.95 N) of the mean preoperative grip strength within one week postoperatively, 238 (37.7%) within two weeks, 304 (47.9%) within three weeks, and 391 (61.6%) regained 80% of the

mean preoperative strength in four weeks. Regarding the 1463 patients who were followed-up for their return-to-work status, seven patients (0.5%) returned to work within the ﬁrst postoperative week, 381 (26%) within two weeks, 761 (52%) within three weeks, 1029 (70.3%) within four weeks, and the other 434 patients returned to work four or more weeks after endoscopic carpal tunnel release.

& SUMMARY The advantages of endoscopic over open carpal tunnel release include no hypertrophic scar or scar tenderness, no pillar pain, less compromise to the pinch or grip strength, and an earlier return-to-work and daily activities. However, the surgeon can be in front of unexpected difﬁculties, e.g., ganglion, neuroﬁbroma, and neurilemmoma, that limit visualization into the carpal canal. As in any surgical procedure, safety and success are dependent upon a thorough knowledge of the anatomy of the area, adequate training, and familiarity with the use and capabilities of the instrumentation. Surgeons who are not familiarized with endoscopes and arthroscopic techniques may give rise to major iatrogenic complications. Data gathered from the experience of past 17 years strongly indicate that, due to the preservation of normal anatomical structures of the hand, clinical results of endoscopic carpal tunnel release are better than those of the standard open procedure. Endoscopic carpal tunnel release with the Chow dual-portal technique is a reliable method of treating carpal tunnel syndrome and can be performed safely by a well-trained surgeon. Although a debate among surgeons still exists, the endoscopic release of the transverse carpal ligament has already established its position as a minimally invasive surgical technique.

& SUMMATION POINTS

Indications & & &

Same as for open procedure Failure of conservative treatment Thenar weakness or wasting

Endoscopic Carpal Tunnel Release: Chow Technique & 291

Contraindications & & & &

Space-occupying lesions Limited wrist extension Congenital wrist anomalies Any factor affecting the anatomy of the carpal canal

Advantages & & & &

No hypertrophic scar or scar tenderness No pillar pain Less compromise to the pinch and grip strength Earlier return to work and daily activities

Outcomes & &

93% had complete relief or only minor post-operative symptoms 70% returned to work within four weeks

Complications & & & & & & &

Overall 2% to 3.3% complication rate Neuropraxia or nerve injury (1.5% to 2%) Flexor tendon laceration (0.2%) Incomplete release of transverse carpal ligament (0.2% to 0.6%) Hematoma (0.2%) Blood vessel laceration (0.2% to 0.4%) Reﬂex sympathetic dystrophy (!0.5%)

& REFERENCES 1. Pfeffer GB, Gelberman RH, Boyes JH, Rydevik B. The history of carpal tunnel syndrome. J Hand Surg 1988; 13B:28. 2. Paget J. Lectures on Surgical Pathology Delivered at the Royal College of Surgeons of England. 2nd ed. Philadelphia, PA: Lindsay & Blakiston, 1860. 3. Putman JJ. A series of paraesthesia, mainly of the hand, of periodical recurrence, and possibly of vaso-motor origin. Arch Med (New York) 1880; 4:147–62. 4. Learmonth JR. The principle of decompression in the treatment of certain diseases of peripheral nerves. Surg Clin North Am 1933; 13:905–13. 5. Phalen GS, Gardner WJ, Lalonde AA. Neuropathy of the median nerve due to compression beneath the transverse carpal ligament. J Bone Joint Surg 1950; 32A:109–12. 6. Chow JCY. Endoscopic release of the carpal ligament: a new technique for carpal tunnel syndrome. Arthroscopy 1989; 5:19–24. 7. Okutsu I, Nonomiya S, Takatori Y, Ugawa Y. Endoscopic management of carpal tunnel syndrome. Arthroscopy 1989; 5:11. 8. Chow JCY. Endoscopic carpal tunnel release—clinical results of 149 cases. In: 9th Annual AANA Meeting, Orlando, Florida, April 26–29, 1990. 9. Agee JM, Tortsua RD, Palmer CA, Berry C. Endoscopic release of the carpal tunnel: a prospective randomized multicenter study. In: 45th Annual Meeting of the American Society of the Hand, Toronto, Canada, September 24–27, 1990. 10. Mirza MA, King ETJ, Tanveer S. Palmar uniportal extrabursal endoscopic carpal tunnel release. Arthroscopy 1995; 11:82–90. 11. Lewicky R. Endoscopic carpal tunnel release: the guide tube technique. Arthroscopy 1994; 10:39–49. 12. Levy HJ, Spofer TB, Kleinbart FA, et al. Endoscopic carpal tunnel release: an anatomic study. Arthroscopy 1993; 9:1–4. 13. Rotman MB, Manske PR. Anatomical relationships of an endoscopic carpal tunnel device to surrounding structures. J Hand Surg 1993; 18A:442–50. 14. Seiler JG, III, Barnes K, Gelberman RH. Chalidapong P. Endoscopic carpal tunnel release: an anatomic study of the two-incision method in human cadavers. J Hand Surg 1992; 17A:996–1002.

15. Schwartz JT, Waters PM, Simmons BP. Endoscopic carpal tunnel release: a cadaveric study. Arthroscopy 1993; 9:209–13. 16. Luallin SR, Tody EB. Incidental Guyon’s canal release during attempted endoscopic carpal tunnel release: an anatomical study and report of two cases. Arthroscopy 1993; 9:382–6. 17. Chow JCY, Malek M, Nagle D. Complications of endoscopic release of the carpal ligament using the Chow technique. In: 47th Annual Meeting of the American Society for Surgery of the Hand, Phoenix, Arizona, 1992. 18. Chow JCY, Malek MM. Complications of endoscopic release of the carpal ligament using the Chow technique. In: 60th Annual Meeting of the American Academy of Orthopedic Surgeons, San Francisco, California, 1993. 19. Malek MM, Chow JCY. National study of the complications of over 10,000 cases of endoscopic carpal tunnel release. In: 61st Annual Meeting of the American Academy of Orthopedic Surgeons, New Orleans, Louisiana, 1994. 20. Chow JC, Hantes ME. Endoscopic carpal tunnel release: thirteen years’ experience with the Chow technique. J Hand Surg 2002; 27:1011–8. 21. Chiu KY, Ng WF, Wong WB, et al. Acute carpal tunnel syndrome caused by pseudogout. J Hand Surg [Am] 1992; 17:299–302. 22. Pai CH, Tseng CH. Acute carpal tunnel syndrome caused by tophaceous gout. J Hand Surg [Am] 1993; 18:667–9. 23. Duncan KH, Lewis RC, Foreman KA, Nordyke MD. Treatment of carpal tunnel syndrome by members of the American Society for Surgery of the Hand: results of a questionnaire. J Hand Surg 1987; 12A:384–91. 24. Palmer DH. Social and economic costs of carpal tunnel surgery. AAOS Instr Course Lect 1995; 44:167–72. 25. Chow JC, Weiss MA, Gu Y. Anatomic variations of the hook of hamate and the relationship to carpal tunnel syndrome. J Hand Surg [Am] 2005; 30:1242–7. 26. Phalen GS. The carpal tunnel syndrome: seventeen years experience in diagnosis and treatment of six hundred ﬁfty-four hands. J Bone Joint Surg 1966; 48A:211–28. 27. Phalen GS. The carpal tunnel syndrome: clinical evaluation of 598 hands. Clin Orthop 1972; 83:29–40. 28. Braun RM, Davidson K, Doehr S. Provocative testing in the diagnosis of dynamic carpal tunnel syndrome. J Hand Surg 1989; 14A:195–7. 29. Upton A, McComas A. The double crush in nerve entrapment syndromes. Lancet 1973; 2:359. 30. Massey E, Riley T, Pleet A. Co-existent carpal tunnel syndrome and cervical radiculopathy (double crush syndrome). South Med J 1981; 74:957–9. 31. Yu J, Bendler E, Montari A. Neurological disorders associated with carpal tunnel syndrome. Electromyogr Clin Neurophysiol 1979; 19:27–32. 32. Hurst L, Weissberg D, Carroll R. The relationship of the double crush to carpal tunnel syndrome (an analysis of 1000 cases of carpal tunnel syndrome). J Hand Surg 1985; 10B:202–4. 33. Carroll RE, Hurst LC. The relationship of the thoracic outlet syndrome and carpal tunnel syndrome. Clin Orthop 1982; 164:149. 34. Wood VE, Biondi J, Linda L. Double-crush nerve compression in thoracic-outlet syndrome. J Bone Joint Surg 1990; 72A(1):85–7. 35. Jones NF, Ming NL. Persistent median artery as a cause of pronator syndrome. J Hand Surg 1988; 13A:728–32. 36. Berman AT, Straub RR. Importance of preoperative and postoperative electrodiagnostic studies in the treatment of carpal tunnel syndrome. Orthop Rev 1974; 3:57. 37. Grundberg AB. Carpal tunnel decompression in spite of normal electromyography. J Hand Surg 1983; 8A:348–9. 38. Shivde AG, Dreizin I, Fisher MA. The carpal tunnel syndrome: a clinical electrodiagnostic analysis. Electromyogr Clin Neurophysiol 1981; 21:143. 39. Jackson DA, Clifford JC. Electrodiagnosis of mild carpal tunnel syndrome. Arch Phys Med Rehabil 1989; 71:199–204. 40. Cioni R, Passero S, Paradiso C, et al. Diagnostic speciﬁcity of sensory and motor nerve conduction variables in early detection of carpal tunnel syndrome. J Neurol 1989; 236:208–13.

292 & Chow and Papachristos 41. Molitor PJ. A diagnostic test for carpal tunnel syndrome using ultrasound. J Hand Surg 1988; 13B:40–1. 42. Murphy RX, Chernofsky MA, Osborne MA, Wolson AH. Magnetic resonance imaging in the evaluation of persistent carpal tunnel syndrome. J Hand Surg 1993; 18A:113–20. 43. Richman JG, Gelberman RH, Rydevik B, Gylys-Morin V. Carpal tunnel volume determination by magnetic imaging 3-D reconstruction. J Hand Surg 1987; 12A:712. 44. Chow JCY. Endoscopic release of the carpal ligament for carpal tunnel syndrome: 22-month clinical results. Arthroscopy 1990; 6:288–96. 45. Nagle DJ, Fischer T, Hastings H, et al. A multicenter prospective study of 640 endoscopic carpal tunnel releases using the Chow extrabursal technique. In: 47th Annual Meeting of the American Society for Surgery of the Hand, Phoenix, Arizona, 1992. 46. Nagle D, Fischer T, Harris G, et al. A multi-center prospective review of 640 endoscopic carpal tunnel releases using the Chow technique. Arthroscopy 1996; 12:139–43. 47. Chow JCY. The Chow technique of endoscopic release of the carpal ligament for carpal tunnel syndrome: four years of clinical results. Arthroscopy 1993; 9:301–14. 48. Chow JCY. Endoscopic carpal tunnel release. Clin Sports Med 1996; 15:769–84. 49. Chow JCY. Endoscopic carpal tunnel release. In: Chow JCY, ed. Advanced Arthroscopy. New York: Springer, 2001:271–86. 50. Mannerfelt L, Hybbinette CH. Important anomaly of the thenar motor branch of the median nerve. Bull Hosp Jt Dis 1972; 33:15. 51. Caffee HH. Anomalous thenar muscle and median nerve: a case report. J Hand Surg 1979; 4:446. 52. Ogden J. An unusual branch of the median nerve. J Bone Joint Surg Am 1972; 54:1779–81. 53. Papathanassiou BT. A variant of the motor branch of the median nerve in the hand. J Bone Joint Surg Br 1968; 50:156. 54. Lanz U. Anatomical variations of the median nerve in the carpal tunnel. J Hand Surg Am 1977; 2:44. 55. Johnson RK, Shrewsbury MM. Anatomical course of the thenar branch of the median nerve, usually in a separate tunnel through the transverse carpal ligament. J Bone Joint Surg Am 1970; 52:269. 56. Seradge H, Seradge E. Median innervated hypothenar muscle: anomalous branch of median nerve in the carpal tunnel. J Hand Surg Am 1990; 15:356–9.

57. Chow JCY. Carpal tunnel release. In: McGinty JB, ed. Operative Arthroscopy. 3rd ed. Philadelphia, PA: Lippincott Williams & Wilkins, 2003:798–818. 58. Viegas S, Pollard A, Kaminski K. Carpal arch alteration and related clinical status after endoscopic carpal tunnel release. J Hand Surg Am 1992; 17:1012–6. 59. Garcia-Elias M, Sanches-Freijo J, Salo J, et al. Dynamic changes of the transverse carpal arch during ﬂexion-extension of the wrist: effects of sectioning the transverse carpal ligament. J Hand Surg Am 1992; 17:1017–9. 60. Richman JA, Gelberman RH, Rydevik BL, et al. Carpal tunnel syndrome: morphologic changes after release of transverse carpal ligament. J Hand Surg Am 1989; 14:852–7. 61. Das SK, Brown HG. In search of complications in carpal tunnel decompression. Hand 1976; 8:243–9. 62. MacDonald RI, Lictman DM, Hanlon JJ, et al. Complications of surgical release for carpal tunnel syndrome. J Hand Surg 1978; 3:70–6. 63. Lilly CJ, Magnell TD. Severance of the thenar branch of the median nerve as a complication of carpal tunnel release. J Hand Surg Am 1985; 10:399–402. 64. Louis DS, Green TL, Noellert RC. Complications of carpal tunnel surgery. J Neurol 1985; 62:352–5. 65. Kessler FB. Complications of the management of carpal tunnel syndrome. Hand Clin 1986; 2:401–6. 66. Gartsman GM, Kovach JC, Crouch CC, et al. Carpal arch alteration after carpal tunnel release. J Hand Surg Am 1986; 11:372–4. 67. Terrino AL, Belskey MR, Feldon PG, et al. Injury to the deep motor branch of the ulnar nerve during carpal tunnel release. J Hand Surg Am 1993; 18:1038–40. 68. May JW, Rosen H. Division of the sensory ramus communicans between the ulnar median nerves: a complication following carpal tunnel release. J Bone Surg Am 1981; 63:836. 69. Brown RA, Gelberman RH, Seiler JG, III, et al. Carpal tunnel release: a prospective randomized assessment of open and endoscopic methods. J Bone Joint Surg Am 1993; 75:1265–75. 70. Palmer DH, Paulson JC, Lane-Larsen CL, Peulen V, Olson J. Endoscopic carpal tunnel release: a comparison of two techniques with open release. Arthroscopy 1993; 9:498–508.

37 Limited Incision Carpal Tunnel Release with the Indiana Tome Kenneth R. Means, Jr., James P. Higgins, and Thomas J. Graham

The Curtis National Hand Center, Union Memorial Hospital, Baltimore, Maryland, U.S.A.

& INTRODUCTION Carpal tunnel syndrome (CTS) is a well-known compression neuropathy of the median nerve at the level of the wrist. Several surgical techniques have been described for the treatment of this disorder. These techniques began with the now traditional open incision procedure for release of the transverse carpal ligament (TCL) and have included varying degrees of ﬂexor retinaculum and distal volar forearm fascia release. Recent years have seen an overall change in patient and surgeon perspective as to what deﬁnes an optimal surgical procedure. These changing expectations have led to the development of several “minimally invasive” methods in all surgical ﬁelds. The approach to carpal tunnel release has been no less affected by this shift in the general surgical paradigm. The principles relevant to carpal tunnel release are, on the surface, quite simple. One must release all potential compression points involving the median nerve at the wrist in a safe and reliable manner. Yet, few surgical interventions for the treatment of a well-deﬁned disorder have engendered more controversy with regard to treatment options and relative safety margins. The most recent carpal tunnel release options have endeavored to provide patients with a smaller scar, less pillar pain, and minimal postoperative functional deﬁcit which allows rapid return to work. These goals must be combined with complete release of median nerve pressure points at the wrist while minimizing risks of permanent nerve or other structural damage. These minimally invasive procedures also attempt to achieve the low levels of recurrence that are available through conventional open release (1). Limited incision carpal tunnel release (LICTR) with the Indiana Tome system was ﬁrst described in the literature in 1996 by Lee, Plancher, and Strickland (2). The instruments needed for this method are currently available through the orthopedic products and technology company Biomet, Inc. (Warsaw, Indiana, U.S.A.). One distinct advantage of this method is that the release proceeds in a distal-to-proximal direction. This means that distal vulnerable transverse structures, such as the superﬁcial palmar arterial arch and communicating digital nerve branches, remain distal, safely behind the ﬁeld of dissection. Also, direct distal visualization allows determination of the presence or absence of a transligamentous variation of the motor branch of the median nerve.

& INDICATIONS LICTR with the Indiana Tome is indicated for patients with primary idiopathic CTS for whom nonoperative treatment options have failed to relieve symptoms to satisfaction. We do not recommend the use of this system for revision carpal tunnel release. We also emphasize caution for patients with signiﬁcant

anatomic alterations, such as those with major posttraumatic deformity. It is also our belief that a relative contraindication would include any patient with a suspected mass, dense median nerve motor and/or sensory deﬁcit, or any other situation that would necessitate complete exploration of the median nerve and carpal tunnel contents. Essentially, indications and contraindications are not appreciably different from those for other minimally invasive carpal tunnel release methods.

& CONSIDERATIONS FOR PREOPERATIVE PLANNING Preoperative physical examination and work-up is no different from that obtained for standard open carpal tunnel release. Standard nonoperative treatment options should be explored prior to recommending surgical intervention, depending on the clinical severity of the median nerve compression. These may include, but are not limited to, activity modiﬁcation, splinting (especially if night symptoms are prevalent), medications, and/or injections.

& SURGICAL TECHNIQUE Operating room setup is identical to routine hand procedures. We typically use local anesthesia and sedation as a minimum anesthesia requirement, though as with all cases we tailor this to the individual patient’s needs. We often have our anesthesia colleagues perform intravenous regional Bier block anesthesia using a well-padded double forearm tourniquet. The surgeon should ensure that all of the necessary tools are available in the set (Figs. 1 and 2). The complete kit includes the blunt single pilot, the palmar stripper, the blunt double pilot, and the singleuse Indiana Tome cutting instrument. There is also an optional tome guide. The operative approach is based on anatomic landmarks. The ﬁrst landmark is deﬁned by visualizing a line extending proximally from the radial border of the ring ﬁnger. The second landmark is found by envisioning a line extending ulnarly from the distal edge of the thenar musculature (Kaplan’s cardinal line). Where these two imaginary lines cross marks the center of the approximately 2.0 cm longitudinal palmar skin incision (Fig. 3). Dissection is carried through the skin elements to the level of the palmar fascia, with a gentle bias toward angling the dissection radially. The palmar fascia is incised slightly radial to the skin incision. This slight radial progression of dissection allows the healing skin and ligament wounds to be staggered. A small self-retaining retractor (e.g., Heiss retractor) is placed in the wound. A blunt right angle retractor (e.g., Ragnell retractor) placed in the proximal axilla of the skin incision can aid in obtaining a clear view for safe release

294 & Means et al.

FIGURE 1 The single pilot, double pilot, and palmar stripper. Source: From Ref. 3.

of the distal TCL. Next, the distal edge of the TCL is identiﬁed. Using a scalpel, the distal edge of the TCL is incised for approximately 1.0 cm in a distal-to-proximal direction and along a line that is ulnar to the longitudinal midline of the wrist so as to avoid the underlying tendons and median nerve. Before using the Indiana Tome preparatory instrumentation, it is possible to determine whether a transligamentous motor branch of the median nerve is present. If the origin of the thenar muscles is more ulnar than expected upon initial dissection and is in line with the path of release of the TCL, this should raise suspicion for a possible transligamentous motor branch. If this is the case, blunt scissors are used to decide whether such a branch exists and should be protected. The blunt pilot (Fig. 4) is introduced beneath the TCL distally. The surgeon should drop the instrument handle toward the patient’s hand during introduction such that the tip of the blunt pilot is angled in a volar direction, thus hugging the undersurface of the TCL. Passage of this blunt pilot should be smooth and not at all aggressive. All of the instruments should be passed longitudinally along the imaginary line extending proximally from the radial border of the ring ﬁnger. As the blunt pilot is passed, the tip will be felt as it exits the undersurface of the TCL proximally. A surgical pen is then used to mark the skin overlying the pilot tip, roughly two ﬁngerbreadths proximal to the proximal volar wrist crease (Fig. 5). This skin marking is used as a target for later instrument passes and ensures release of the TCL and the distal forearm fascia.

The palmar stripper is the next tool to be used (Fig. 6). It consists of a blunt skid, which is longer, and a sharp blade, which is shorter. The palmar stripper should be oriented such that the blunt skid will be inserted in a deeper position than the sharp blade. The blunt skid is passed under the TCL in the identical pathway as the previously passed blunt pilot, sliding along the undersurface of the TCL. This allows the sharp blade of the palmar stripper to pass superﬁcial to the TCL and to free the dense connections to the overlying palmar fascia (Fig. 7). The palmar stripper is passed proximally until the blunt skid hits the skin target marked earlier on the volar forearm. The double pilot is the ﬁnal instrument to be passed in preparation for the cutting tome (Fig. 8). It has two blunt skids to straddle the TCL superﬁcially and deep. The skids are slightly wider than the cutting tome, therefore preparing a pathway for smooth passage of the cutting tome (3). The double pilot is passed in the same distal-to-proximal direction, with the skids straddling the TCL, until the tip is again seen and felt at the volar forearm skin mark. The single-use cutting tome may now be safely employed (Fig. 2). The longer blunt skid of the tome is inserted just deep to the TCL. The vertically oriented cutting blade is allowed to engage the axilla of the incision of the previously released distal edge of the TCL. Using a single, smooth, steady motion, the tome is passed proximally until the blunt skid reaches the skin mark, thus releasing the TCL and the distal volar forearm fascia. Any meeting of resistance should alert the surgeon to the

FIGURE 2 The single-use cutting tome. Source: From Ref. 3.

Carpal Tunnel Release with the Indiana Tome & 295

FIGURE 3 Operative markings of limited palmar incision and distal border of thenar/hypothenar arch. The curved line represents the distal margin of the pressure-bearing region of the carpal arch. The LICTR procedure maintains the integrity of this arch. Abbreviation: LICTR, limited incision carpal tunnel release. Source: From Ref. 3.

possibility that the cutting tome is drifting from the pathway deﬁned by the preparatory instruments. Again, it is absolutely critical that the cutting tome, as with the preparatory tools, be passed along the same line visualized as extending proximally from the radial border of the ring ﬁnger. Once the cutting tome is removed from the wound, the TCL may be inspected under direct visualization to ensure complete release. Also, the carpal tunnel can be explored to evaluate for tenosynovitis, masses, and median nerve condition (3). For closure, tourniquet release is at the surgeon’s discretion. We do not routinely let down our tourniquet prior to closure. Skin is closed with a suture of the surgeon’s choice. No deep structures are repaired. A splint may be used if the surgeon desires, though we typically do not use one. Instead, we allow the patient to begin active range of motion in a postoperative soft dressing applied to the hand and wrist. Stitches are removed in one to two weeks and activities are gradually increased as tolerated. Patients may return to work when comfortable, some preferring to return even prior to the ﬁrst postoperative visit if heavy labor is not part of their profession.

FIGURE 5 Marking the position of the blunt pilot tip to create a goal for orientation for subsequent instrumentation. Source: From Ref. 3.

symptom relief, and pillar pain. Major complications would include deep infection, wound dehiscence, and nerve, tendon, or arterial vessel injury. If these problems are encountered, standard treatments may be implemented as they are for open carpal tunnel release postoperative complications. The outcomes section below discusses published series that deﬁne complication rates with the LICTR system. As mentioned above, the most effective manner of eliminating iatrogenic damage to major structures is to follow the steps as outlined. If a technical impasse is encountered during the procedure, the surgeon must recognize the situation and either correct it so that the technique may proceed or transition into a complete open carpal tunnel release. As with any “minimally invasive” technique, we discuss with patients preoperatively the possibility of conversion to a larger exposure open procedure if obstacles arise.

& OUTCOMES

As with any procedure, complications may be divided into major and minor categories. Complications that would likely be considered minor would include superﬁcial wound healing difﬁculties, superﬁcial infections, scar sensitivity, incomplete

Literature reports regarding outcomes and complications for the range of carpal tunnel release procedures vary widely. Resolution of preoperative symptoms with LICTR using the Indiana Tome has been comparable to those obtained with open or endoscopic carpal tunnel release. Several studies have presented preoperative symptom resolution rates over 90% with LICTR using the Indiana Tome (4–7). Recurrence rates with LICTR have likewise been similar to those obtained with other carpal tunnel release options. Yung et al. reported no recurrences requiring repeat operation in 58 LICTRs after one to two years (4). Botte et al. described a 1% to 11% recurrence rate for traditional open release procedures necessitating

FIGURE 4 The blunt pilot. Source: From Ref. 3.

FIGURE 6 The palmar stripper. Source: From Ref. 3.

& COMPLICATIONS

296 & Means et al.

FIGURE 7 Using the palmar stripper, the TCL is dissected free of its dense connections with the overlying palmar fascia. Abbreviation: TCL, transverse carpal ligament. Source: From Ref. 3.

reexploration (8). Interestingly, they noted multiple studies in which the most common cause for recurrence was incomplete sectioning of the distal portion of the TCL. The LICTR with the Indiana Tome starts at the most distal aspect of the TCL, thus minimizing this potential cause for recurrence or incomplete symptom resolution while still allowing release of the distal antebrachial fascia (2). The most recent study regarding LICTR found that pillar pain was present in 21% at three months, and 9% at one year (4). This is similar to a previous report which found that pillar pain and scar tenderness were present in 14% at three months following LICTR (5). These rates compare favorably with those described for endoscopic CTR and open CTR (9,10). Many of the difﬁculties in determining the incidence of pillar pain for different procedures come from the numerous deﬁnitions and criteria for its diagnosis that exist (9). As with all surgical interventions, every possible route to carpal tunnel release has had reports of iatrogenic damage to structures. In Lee and Strickland’s report of 694 LICTRs, there were two (0.29%) cases of median nerve laceration, one with partial injury and one with complete transection (2). These two events occurred early in their usage of the Indiana Tome and prompted a change in their release protocol in which more than one pass with the cutting tome is not allowed. There is also a case report of median nerve transection using the LICTR

FIGURE 8 The double pilot. Source: From Ref. 3.

Indiana Tome (11) following a single pass with the cutting tome. In this case, it was felt that injury may have occurred by allowing the cutting tome to drift in a radial direction, based on the orientation of the transection at the time of exploration. The authors reference a biomechanical cadaver study by Gutow that showed 158 or more of radial deviation of the cutting tome led to median nerve injuries in 50% of their specimens. Conversely, keeping the tome in line with the long axis of the ring ﬁnger, as described in this chapter, led to no nerve or tendon lacerations (12). Atik et al. performed a cadaver investigation that conﬁrmed a “safe zone” in line with the middle/ring ﬁnger axis for limited incision release procedures (7). They also established that working in a distal-to-proximal direction enhances the safety of these surgical interventions. Palmer et al. found in a prospective, nonrandomized trial of 211 carpal tunnel releases that ulnar nerve parasthesias developed in 10% of Agee single portal endoscopic carpal tunnel release (ECTR) patients, 13% of Chow double portal ECTR patients, and 10% of open release patients (10). They had no instances of nerve, vessel, or tendon lacerations with any of the techniques used. In a prospective, randomized comparison of 192 hands using either the Agee single portal ECTR or standard open release, Trumble et al. showed better results for the ﬁrst three months in the ECTR group (13). There was no signiﬁcant difference in complication rates or cost between the two methods. Boeckstyns and Sorensen did an analysis of published series concerning endoscopic and open carpal tunnel release (14). They determined that ECTR had an increased risk of transient nerve disturbances (4.3%) over open releases (0.9%) in prospective randomized studies. However, their report also showed that the rate of permanent nerve damage following ECTR was equivalent to that for open release (0.3% vs. 0.2% respectively). They stressed, nevertheless, that the potential devastating complications of ECTR must be avoided by proper training and conversion to open release when there is poor visibility with the endoscope. In a survey of members of the ASSH, Palmer and Toivonen noted a surprisingly high number of median, ulnar, and digital nerve lacerations as well as vessel and tendon lacerations which surgeons had reported following open and endoscopic carpal tunnel releases that either they had performed or they had explored following referral from institutions outside of their own (15). Out of 616 responses regarding open release, there were 230 nerve, 34 vessel, and 19 tendon lacerations. The authors concluded that carpal tunnel release regardless of technique may not be as safe as previously thought and that surgeons must be “ever mindful of structures that lie within the carpal tunnel.” We are aware of a single report comparing ECTR and LICTR with the Indiana Tome. Wong et al. investigated 30 patients with bilateral CTS in a prospective, randomized fashion (16). Patients were randomly assigned to have one side treated with the modiﬁed Chow two-portal ECTR technique and the opposite hand with the LICTR method, or limited open carpal tunnel release (LOCTR), as it is referred to in the article. The investigators found statistically signiﬁcant less early postoperative pain and less pillar symptoms for those in the LOCTR group. At one year, these differences did not persist. At eight weeks postoperatively, there was a notable patient preference for the LOCTR procedure. This predilection for LOCTR showed only a trend at six months to one year postoperatively. There were no major complications in either group.

Carpal Tunnel Release with the Indiana Tome & 297

& SUMMARY

2.

Overall, LICTR with the Indiana Tome is as effective and as safe as other minimally invasive practices for carpal tunnel release. It is a relatively straightforward skill to learn and may be reliably reproduced. Future studies will no doubt help to elucidate the most successful, safest, and most cost-effective means of carpal tunnel release. However, as with most surgical endeavors, there likely will remain room for individual surgeons to decide what application works best in their hands. We feel the LICTR combines the reduced postoperative pain and rapid recovery of other minimally invasive systems with the safety and low cost of traditional open release.

3.

& SUMMATION POINTS

Indications &

Primary idiopathic CTS.

Outcomes &

Comparable to open and other minimally invasive procedures.

Complications &

Similar to open and other minimally invasive techniques.

4. 5. 6. 7. 8. 9. 10. 11. 12.

13.

However, signiﬁcant nerve or other structural injuries are possible if the surgeon is not properly trained in the technique.

14.

& REFERENCES

15.

1. Concannon MJ, Brownﬁeld ML, Puckett CL. The incidence of recurrence after endoscopic carpal tunnel release. Plast Reconstr Surg 2000; 105:1662–5.

16.

Lee WP, Plancher KD, Strickland JW. Carpal tunnel release with a small palmar incision. Hand Clin 1996; 12:271–84. Higgins JP, Graham T J. Carpal tunnel release via limited palmar incision. Hand Clin 2002; 18:299–306. Yung PS, Hung LK, Tong CW, Ho PC. Carpal tunnel release with a limited palmar incision: clinical results and pillar pain at 18 months follow-up. Hand Surg 2005; 10(1):29–35. Lee WP, Strickland JW. Safe carpal tunnel release via a limited palmar incision. Plast Reconstr Surg 1998; 101:418–24. Serra JM, Benito JR, Manner J. Carpal tunnel release with a short incision. Plast Reconstr Surg 1997; 99:129–35. Atik TL, Smith B, Baratz ME. Risk of neurovascular injury with limited-open carpal tunnel release: deﬁning the “safe-zone”. J Hand Surg [Br] 2001; 26(5):484–7. Botte MJ, von Schroeder HP, Abrams RA, Gellman H. Recurrent carpal tunnel syndrome. Hand Clin 1996; 12(4):731–43. Ludlow KS, Merla JL, Cox JA, Hurst LN. Pillar pain as a postoperative complication of carpal tunnel release: a review of the literature. J Hand Ther 1998; October/December:277–82. Palmer DH, Paulson JC, Lane-Larsen CL, Peulen VK, Olson JD. Endoscopic carpal tunnel release: a comparison of two techniques with open release. Arthroscopy 1993; 9(5):498–508. Chapman CB, Ristic S, Rosenwasser MP. Complete median nerve transection as a complication of carpal tunnel release with a carpal tunnel tome. Am J Orthop 2001; 30(8):652–3. Gutow AP. Cadaveric evaluation of minimal incision carpal tunnel release using the Biomet Indiana Tome carpal tunnel release system. In: Annual meeting of ASSH. Minneapolis, MN, September 10–12, 1998. Trumble TE, Diao E, Abrams RA, Gilbert-Anderson MM. Singleportal endoscopic carpal tunnel release compared with open release; a prospective, randomized trial. J Bone Joint Surg Am 2002; 84(7):1107–15. Boeckstyns MEH, Sorensen AI. Does endoscopic carpal tunnel release have a higher rate of complications than open carpal tunnel release? J Hand Surg [Br] 1999; 24(1):9–15. Palmer AK, Toivonen DA. Complications of endoscopic and open carpal tunnel release. J Hand Surg [Am] 1999; 24:561–5. Wong KC, Hung LK, Ho PC, Wong JMW. Carpal tunnel release: a prospective, randomised study of endoscopic versus limited-open methods. J Bone Joint Surg Br 2003; 85:863–8.

38 Minimally Invasive Carpal Tunnel Release Using the Security Clipe James W. Strickland and Lance A. Rettig

Department of Orthopedic Surgery, Indiana University School of Medicine, Indianapolis, Indiana, U.S.A.

& INTRODUCTION

& CONSIDERATIONS FOR PREOPERATIVE PLANNING

Carpal tunnel syndrome (CTS) results from irritation of the median nerve at the level of the wrist (1). Any process that increases the contents of the carpal canal can lead to higher interstitial pressure and compression of the median nerve (2,3). Treatments are designed to increase the space available for the nerve. First line treatment includes splinting the wrist in a neutral position. Kuo, utilizing ultrasound studies, demonstrated that positioning the wrist in neutral lowers compression of the median nerve (4). Additional non-surgical treatment options include steroid injection, activity modiﬁcations, tendon gliding exercises and the administration of anti-inﬂammatary medications (5). When symptoms are recalcitrant to conservative management surgical intervention is indicated. The goal of surgery is to decompress the median nerve in the carpal tunnel by transecting the deep transverse carpal ligament (TCL). Surgical options include open or endoscopic division of the TCL. Open techniques are performed through a longitudinal incision in the proximal palm with or without extensions across the wrist. Dissection is carried out until all or part of the TCL has been exposed. The entire ligament is then carefully transected. Limited or short palmar incisions have evolved because these methods are thought to result in reduced morbidity compared to more extensive approaches that violate all tissue planes over a greater distance. Decreased palmar sensitivity or pillar pain may be reduced in a carpal tunnel released with a limited incision (6). Instrumentation has been developed to allow for safe division of the TCL through a small incision (7). Design changes have taken place to decrease the chance of median nerve injury. The Security Clipe (Biomet, Warsaw Indiana, U.S.A.) was designed as a method of enclosing the ligament before passing the transecting knife in order to prevent any adjacent structures from entering the cutting path.

Physical exam ﬁndings, symptoms, and neurodiagnostic tests are all helpful in the diagnosis of CTS. CTS must be differentiated from a more proximal median nerve compression such as cervical radiculopathy or pronator syndrome. Phalen’s maneuver and median nerve compression test can help localize embarrassment of the median nerve at the wrist level (8). Abnormally expanded two-point sensory exam and thenar muscle wasting suggests chronic and severe compression of the nerve. Nerve conduction and electromyographic studies are the principle objective tools used to evaluate CTS (9). These tests can also be helpful in clinical staging of CTS.

& INDICATIONS Patients whose CTS symptoms are unresponsive to conservative treatment after two to three months may be considered for operative release using the Security Clip or a standard open incision. Contraindications for the Security Clip include patients with a known palmar carpal canal mass, previous displaced wrist fracture, or any other condition that may have altered wrist morphology. A relative contraindication is a patient requiring concomitant open palmar ﬂexor tenosynovectomy.

& SURGICAL TECHNIQUE Carpal tunnel release (CTR) with the Security Clip system is performed as an outpatient using local, regional, or general anesthesia. Instruments required for the procedure include a hand set, a small Holzheimer type self-retaining retractor, the soft tissue preparatory instruments, the Security Clip and the disposable blade that tracks in the Clip. The patient is placed supine on the operating table. A well- padded tourniquet is placed around the brachium. The operated arm is then placed on a hand table. Ten to Fifteen cc’s of 1% local anesthesia without epinephrine are placed into the midline of the proximal palm and across the wrist and distal forearm. Additional anesthetic is administered into the deeper tissues palmar to the TCL. Three to ﬁve cc’s of local anesthetic should also be placed within the carpal canal staying ulnar to the midline to avoid injury to the median nerve. The landmarks for the surgical incision are the distal border of the thenar muscles and the radial border of the ring ﬁnger. A line is drawn over the proximal extent of the TCL in line with the longitudinal axis of the radial border of the ring ﬁnger. A second line is drawn diagonally from the proximal thenar musculature. The point of intersection of the two lines approximates the most distal edge of the TCL (Fig. 1). The skin incision is approximately 1.5 cm in length. It is designed to be about two-thirds proximal and one-third distal to the extended thenar muscle line. The arm is elevated brieﬂy or an Esmarch wrap is utilized and the tourniquet usually inﬂated to 250 mmHg. The skin is incised down through the palmar fascia. A self retaining retractor (Holtzheimer or Biomet CTR retractor) is positioned in the wound. The Biomet (Biomet, Warsaw, Indiana, U.S.A.)

300 & Strickland and Rettig

FIGURE 1 Landmarks for the surgical incision. The incision is about two-thirds proximal and one-third distal to the extended thenar muscle line and slightly ulnar to the midpoint between the two creases.

retractor has a slight palmar bend which is helpful for the slightly extended wrist. The retractor is gradually deepened by pushing the tissue walls away with an elevator and repositioning. The proximal component of the Biomet retractor or a Ragnell retractor is utilized to retract the soft tissue proximally exposing the leading edge of the TCL. With careful dissection within the distal portion of the carpal canal, anomalous or penetrating branches of the recurrent motor branch of the median nerve are identiﬁed. The superﬁcial palmar arterial arch is usually visualized and easily protected throughout the procedure. When the distal portion of the TCL has been identiﬁed a scalpel blade is then used to longitudinally divide the distal ulnar 1.5 cm of the ligament under direct vision (Fig. 2). Three instruments are utilized to clear any tissues adherent to the TCL. The ﬁrst instrument the blunt single pilot, has a smooth edge and ﬂat plane (Fig. 3). The purpose of the tool is to create a clear plane between the ligament and the underlying contents of the carpal tunnel. The pilot is placed just deep to the “V” shaped notch created by incising the distal 1.5 cm of the TCL. The instrument is passed from distal to proximal deep to the

FIGURE 2 Incision of the distal 1.5 cm of the transverse carpal ligament under direct vision. The specially designed, three-sided Biomet retractor facilitates exposure.

FIGURE 3 The blunt pilot is passed beneath the carpal ligament.

ligament. The pilot and all subsequent instruments must be directed slightly ulnarward to avoid injury to the radially vectored median nerve. After removal of the pilot, the palmar stripper is placed into the wound. It is a double sided instrument with a blunt lower skid and a sharpened upper edge 15 mm in length (Fig. 4A). The tool is designed to prepare a channel through the dense connective tissue immediately palmar to the ligament. The distance between the two skids is 3 mm approximating the thickness of the ligament at its distal third. This allows the instrument to straddle the ligament as it is passed from distal to proximal. Under direct visualization, the tool is inserted into the notch created by distal division of the ligament. The lower skid is placed deep to the ligament and passed proximally. The sharper shorter upper skid will pass palmar to the ligament. The stripper is passed until the blunt center post meets the edge of the “V” shaped defect of the ligament (Fig. 4B). After withdrawing the palmar stripper, the double pilot is introduced. The tool has long blunt upper and lower skids (Fig. 5A). There are no sharp edges on the skids which could injure surrounding anatomical structures. The double pilot enters the “V” notch created by the incision in the distal ligament. It straddles the ligament and is passed proximally to establish a pathway for the Security Clip. The tool is passed until the blunt center post is fully engaged against the distal edge of the ligament (Fig. 5B). It is critical that the instruments are passed sequentially using the same ulnar vector. All instruments are moistened prior to passage to provide better sliding characteristics. If some difﬁculty is encountered when passing the double pilot, it may be passed several times in a slightly different direction to be sure that there is an adequate channel for Security Clip passage. The Security Clip is designed to protect the soft tissues on both the palmar and dorsal sides of the ligament. The lower skid has the same length as that of the double pilot. An upper skid is present which converges on the lower skid terminally (Fig. 6A). The distance between the proximal end of the clip and the terminal closure of the upper skid is 3.5 cm. With this conﬁguration, the Security Clip straddles the ligament creating a closed system that is consistent with the usual morphology of the TCL; thin proximally and thicker distally. Prior to passing the Security Clip, a stylus is introduced into its central track creating a 3 mm separation between the lower and upper

Carpal Tunnel Release Using the Security Clipe & 301 (A)

(A)

(B) (B)

FIGURE 4 (A) The conﬁguration of the palmar stripper with its short sharp upper component and long blunt lower skid. (B) Drawing of completed passage of the palmar stripper after it has prepared a channel through the dense palmar connective tissue.

skids (Fig. 6B). This facilitates positioning of the Security Clip into the prepared channel across the ligament. As the assembly is advanced from distal to proximal across the TCL the stylus will automatically be backed out by the edge of the ligament, and the distal tips of the instrument will close together on the ligament (Fig. 6C). When fully seated, the Security Clip will contain the entire TCL between its skids and all other adjacent tissues will be safely out of harm’s way (Fig. 6D). With the Security Clip straddling the ligament a disposable blade is inserted into the track of the device and passed from distal to proximal between the upper and lower skids (Fig. 7A). The blade is passed down the Security Clip completely dividing the TCL. The upper and lower skids serve to protect the tissues dorsal and palmar to the ligament. Advancement of the blade continues until the disposable device ﬁts ﬂush with the Security Clip (Fig. 7B,C). Once the blade is fully seated, it is withdrawn. The Security Clip is then removed from the wound. The soft tissues are carefully retracted proximally to conﬁrm complete decompression of the TCL. A Freer elevator may also be used to conﬁrm the interval between the transected edges of the TCL. Hemostasis is achieved with bipolar cautery. The wound is irrigated and the skin closed with 5.0 nonabsorbable horizontal mattress sutures. A well padded dressing is applied with the ﬁngers left free for full motion and the tourniquet is deﬂated.

& POSTOPERATIVE REHABILITATION Early digital range of motion is encouraged within the conﬁnes of the dressing. At 10 to 14 days following surgery, the sutures are removed and active range of motion of the wrist is initiated. Motion and

FIGURE 5 (A) Introduction of the double pilot with its blunt upper and lower skids. (B) Drawing of completed passage of the double pilot with the skids straddling the transverse carpal ligament.

strengthening exercises are begun at two to four weeks postoperation. At one month, patients are permitted to start wrist strengthening and return to moderate activities. In most cases, patients are able to return to work related activities including heavy labor vocations at six weeks.

& COMPLICATIONS AND THEIR MANAGEMENT The overall complication rate of open CTR is estimated to vary between 2% and 10% (10–12). Reported complications include: median, ulnar, and digital nerve lacerations, vessel and tendon injuries (13). Although the Security Clip is designed for protection of the surrounding anatomical structures, the possibility of median nerve injury still exists. There are two important technical tips to help minimize the risk of median nerve injury. No instrumentation should be passed until the distal portion of the TCL is well visualized and divided. The pilots and the Security Clip should always be angled slightly ulnar to the midline when passed from distal to proximal. If at any time there is concern regarding the possibility of nerve injury then the limited palmar incision should be extended proximally for exploration. CTR utilizing a standard incision should be performed if an anomalous branch of the median nerve or an intracarpal ganglion cyst is discovered at the time of the operation. Occasionally, some resistance may be noted while attempting to pass the Security Clip. In these cases, the steps of ligament preparation are repeated with passage of the palmar stripper and double pilot. Once again the Security Clip is passed making sure to maintain the same passageway and direction created by the pilots. If necessary, the skin incision may be lengthened proximally for a short distance and the incision into the distal TCL extended proximally.

302 & Strickland and Rettig (A)

(A)

(B)

(B)

(C)

(C)

(D)

FIGURE 7 (A) The disposable blade is positioned into the clip and passed distal to proximal between the upper and lower skids. (B) Advancement of the blade continues until it is fully seated within the Security Clip. (C) Drawing of the Security Clip with the disposable blade fully seated within the device. The blade is positioned between the upper and lower skids protecting the surrounding tissue. The transverse carpal ligament has been transected at this point. FIGURE 6 (A) The appearance of the Security Clip with the stylus in place (upper ). The disposable blade ﬁts into the midline of the Clip device. (B) The Security Clip with the stylus in place is passed from distal to proximal, positioning the lower skid deep into the transverse carpal ligament. (C) As the Security Clip is fully seated the stylus is automatically backed out of the device. (D) Drawing of the Security Clip fully engaged with the TCL contained between the upper and lower skids.

& OUTCOMES Previous published results of CTR utilizing a limited incision technique have demonstrated good relief of symptoms with minimal risk of nerve injury (6,7,14). Proposed advantages of using a limited incision are decreased pillar tenderness and earlier return to work or avocational activities (6,7). Hallock found similar results when comparing the mini-open technique

to the endoscopic CTR (15). We have performed over 500 CTRs utilizing the Security Clip device. A single patient was thought to have sustained a digital nerve partial laceration. Postoperatively, the patient was found to have expanded two-point discrimination over the distribution of the ulnar digital nerve of the middle ﬁnger. The amount of pillar tenderness and time to return to activities has compared favorably with open CTR using a limited palmar incision (6,7,14).

& SUMMARY Open CTR through a limited open incision using the Security Clip is an effective device for complete division of the TCL. The

Carpal Tunnel Release Using the Security Clipe & 303

upper and lower skids protect the adjacent anatomic structures to allow for safe transection of the ligament.

& SUMMATION POINTS

Indications &

CTS based upon physical exam and/or electrical studies with recalcitrant symptoms following conservative management.

Outcomes & & & & &

92% achieve near complete relief of preoperative symptoms 6% improved but symptoms still present 2% unchanged Only slight pillar soreness noted at six to eight weeks Return to most activities at six weeks (7)

Complications & &

Median, digital, ulnar nerve injury Tendon/arterial laceration

& FUTURE DIRECTION OF TECHNIQUE Instrumentation should continually be developed to increase the safety margin for release of the TCL. Reﬁnements in the technique described here will include design changes to improve the ease of instrument passage and methods to better conﬁrm the complete division of the TCL.

& REFERENCES 1. Phalen GS. The carpal tunnel syndrome. J Bone Joint Surg Am 1986; 48A:211–28.

2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15.

Cobb TK, Dalley BK, Posteraro RH. The carpal tunnel as a compartment: an anatomic perspective. Orthop Rev 1992; 21:451–3. Gelberman RH, Hergenroeder PT, Hargens AR, et al. The carpal tunnel syndrome: a study of carpal tunnel pressures. J Bone Joint Surg Am 1981; 63A:380–3. Kuo MH, Leong CP, Cheng YF. Static wrist position associated with least median nerve compression: sonographic evaluation. Am J Phys Med Rehabil 2001; 80:256–60. Rozmaryn LM, Dovelle S, Rothman ER, et al. Nerve and tendon gliding exercises and the conservative management of carpal tunnel syndrome. J Hand Ther 1998; 11:171–9. Nathan PA, Meadows KD, Keniston RC. Rehabilitation of carpal tunnel surgery patients using a short surgical incision and an early program of physical therapy. J Hand Surg 1993; 18A:1044–50. Lee WPA, Strickland JW. Carpal tunnel release using a small palmar incision and specialized instruments. Indiana Hand Cent Newsl 1998; 2:3. Gerr F, Letz R. The sensitivity and speciﬁcity of tests for carpal tunnel syndrome vary with the comparison subjects. J Hand Surg [Br] 1998; 23B:151–5. Hilburn JW. General principles and use of electrodiagnostic studies in carpal and cubital tunnel syndromes: with special attention to pitfalls and interpretation. Hand Clin 1996; 12:205–21. Jimenez DF, Gibbs SR, Clapper AT. Endoscopic treatment of carpal tunnel syndrome: a critical review. J Neurosurg 1998; 88:817–26. Urbaniak JR. Complications of treatment of carpal tunnel syndrome. In: Gelberman RH, ed. Operative Repair and Reconstruction. Philadelphia, PA: JB Lippincott, 1991:967–79. Kessler FB. Complications of the management of carpal tunnel syndrome. Hand Clin 1986; 2:401–6. Palmar AK, Toivonen DA. Complications of endoscopic and open carpal tunnel release. J Hand Surg [Am] 1999; 24A:561–5. Lee WP, Plancher KD, Strickland JW. Carpal tunnel release with a small palmar incision. Hand Clin 1996; 12(2):271–84. Hullock GG, Lutz DA. Prospective comparison of minimal incision “open” and two-portal endoscopic carpal tunnel release. Plast Reconstr Surg 1995; 96:941–7.

39 Endoscopic Carpal Tunnel Release: Agee Technique Emran Sheikh

Department of Orthopedics and Plastic Surgery, Rothman Institute, Thomas Jefferson University, Philadelphia, Pennsylvania, U.S.A.

Ednan Sheikh

Department of General Surgery, New York Presbyterian Hospital/Weill Cornell Medical Center, New York, New York, U.S.A.

Virak Tan

Department of Orthopedics, The New Jersey Medical School, University of Medicine and Dentistry of New Jersey, Newark, New Jersey, U.S.A.

& INTRODUCTION Carpal tunnel syndrome (CTS), or median nerve compression at the wrist, is the most common peripheral compressive neuropathy of the upper extremity with an overall prevalence of 1% to 5% in the United States (1–3). Prevalence estimates for the industrial population range as high as 15% (4–6), whereas the annual incidence of CTS is 1.0 to 3.46 per 1000 person years in the general population (6–9). CTS is most common in middleage, occurring more often in women than men (10,11). Increased body mass index has also shown to be correlated with CTS risk (12). At the wrist, the transverse carpal ligament (TCL) extends across the volar aspect of the carpus to create a space termed the carpal tunnel or carpal canal. Normal anatomical structures traveling through the carpal tunnel include nine digital ﬂexor tendons and the median nerve. As pressure increases within the carpal tunnel, the median nerve is more prone to compression than the tendons (9,13). This pressure increase has a variety of etiologies, including positional variations (wrist extension or ﬂexion) (3), hamate hook variations (14), and space-occupying lesions. Proximal nerve compression, general health issues, and comorbidities may make the median nerve more prone to increases in carpal tunnel pressure. Double crush phenomenon etiologies include, thoracic outlet compression, smoking, and diabetes mellitus (15). At a pressure threshold of 20 to 30 mmHg, epineurial blood ﬂow to the median nerve is decreased (16). With prolonged and compromised blood ﬂow, carpal tunnel symptoms and pathology advances. Work-related risk factors for carpal tunnel are not clear, as there is literature supporting opposite conclusions. De Krom et al. concluded that although activities with a ﬂexed or extended wrist carry a higher risk of CTS, typing was not associated with an increased risk of CTS (3). Repetitive tasks in the work industry are not clearly associated with the development CTS (12). Reports have shown that the meatpacking and poultry processing industries have the highest rates followed by the garment and automobile assembly industries, while clerical workers have a much lower rate (6). Although a myriad of conditions contribute to the nerve compression of CTS, the ﬁnal symptomatology may be similar: paresthesias in the median nerve distribution, heaviness of the hand and/or wrist, nocturnal awakening, and even, pain and weakness. Sensory disturbances are often reversible and

result from early compression. However, motor symptoms and signs may herald irreversible damage from advanced compression. Pain is due to direct physical damage to the nerve rather than early compression. Advanced CTS with thenar wasting or intractable symptoms is addressed with surgical division of the TCL, thus reducing pressure on the median nerve (17,18). Learmonth is credited with the ﬁrst open carpal tunnel release (CTR) in 1929 and was later popularized by Phalen in the 1950s (19). Classically, CTR is performed by an open technique. In attempts to reduce recovery time and risks such as pillar pain, modiﬁcations of the classic open CTR have centered on reducing incision size. However, despite the smaller incisions, recovery and risks were similar (20). A meta-analysis of the literature by Boeckstyn concluded that the risk of nerve injury to be 0.2% for open CTR (21). With the advent of ﬁber optic technology, endoscopic carpal tunnel release (ECTR) techniques were developed as minimally invasive procedures for dividing the TCL. Initially, ECTR utilized a two-portal technique, which had a higher incidence of complications at the distal portal site (22,23). In 1992, Agee et al. (24) reported on endoscopic release using a single-portal approach where the endoscope, light source, and blade system are uniﬁed within the same instrument to allow visualization of the TCL, thereby increasing the safety. The focus of this chapter is to discuss the Agee technique for ECTR.

& INDICATIONS The general indications for surgical treatment (whether endoscopic or open) for CTS are failed conservative management and advanced stage with thenar atrophy or weakness. There are instances when ECTR should not be carried out, such as in cases where synovectomy or biopsy is needed. Although data has shown some success for ECTR for recurrent CTS after prior open release, this data is limited (25). Therefore, revision CTR, regardless the primary mode of release (open or endoscopic), may be best approached by an open release because neurolysis of the median nerve may also be necessary (26). Other relative contraindications for ECTR include calciﬁed tendinosis, hamate hook fractures, and congenital anatomic anomalies.

306 & Sheikh et al.

& CONSIDERATIONS FOR PREOPERATIVE PLANNING See discussion in Chapter 36.

& SURGICAL TECHNIQUE A standard surgical setup for wrist procedure is used with the patient supine and the arm abducted on a hand table. The instruments (MicroAire Surgical Instruments, Charlottesville, VA) are opened and assembled on a sterile ﬁeld (Figs. 1 and 2). Surgery is usually performed with intravenous sedation and local anesthetic under tourniquet. Care is taken to use the local anesthetic for only cutaneous and subcutaneous injection at the site of proximal wrist crease incision. Injection within the carpal tunnel and deep into the antebrachial fascia is avoided because it can lead to fogging of the camera lens and poor endoscopic visualization. After surgical markings and inﬂation of the tourniquet, a transverse skin incision is made within the long axis of the ring ﬁnger metacarpal (Fig. 3). The antebrachial fascia is divided in transverse fashion. The distal margin of the fascia incision is used for traction to allow initial blunt dissection between the synovium and undersurface of the antebrachial fascia, permitting entry into the carpal tunnel. A Hamate Finder is introduced through the incision into the carpal canal, deep into the TCL and radial to the hook of the hamate (Fig. 4). Gentle serial passes with the Hamate Finders can be done to prepare the path. The undersurface of the TCL is then cleared of synovial tissue with the Synovium Elevator. This step is performed blind but guided by knowledge of surgical anatomy and tactile feedback. Adequacy of dissection can be determined by feeling the “ridges” on the undersurface of the TCL. At this point, the endoscope is inserted (Fig. 5). The majority of times, the endoscope can be inserted without resistance. If resistance is met, this may be addressed with further dissection with the Synovium Elevator and serial insertion of the Hamate Finders. Conﬁrmation of adequate exposure of the undersurface of the TCL is made with direct endoscopic visualization. Light intensity is set to allow discrimination of the transverse ridges of the deep surface of the TCL. Inadequate or too much brightness will lead to suboptimal ability to discern any crossing structures, including

FIGURE 2 Assembly of handpiece, endoscope, and disposable blade. Source: Courtesy of Virak Tan, MD.

anomalies of the motor branch of the median nerve. The endoscope can be used to bluntly push tissue away for better visualization. Several options are available to create a clear path before incision of the TCL. Slight rotation of the endoscope in an ulnar direction can increase the distance from the median nerve or anomalous motor branch. Cautious blunt dissection with the endoscope by scraping away the synovium may increase visualization. Simple removal and reinsertion of the endoscope while providing traction on the distal antebrachial fascial edge at the site of incision may allow clearance of tissues (fat and synovium) from the endoscope line of sight. Finally, the subfascial path at the level of the antebrachial fascia should be well dissected to allow the Synovium Elevator to be inserted deep into the fascia at the level of the incision. Deliberate dissection at the undersurface of the fascia and TCL is necessary to allow optimal exposure. Once the TCL undersurface is well-exposed (Fig. 6), the trigger on the Handpiece is pulled to deploy the blade at the end of the Disposable Blade Assembly. The distal margin of the ligament is divided ﬁrst which allows the surgeon to assess the thickness of the TCL and to verify the distal extent of the true carpal ligament. The cross-section is often obvious in

Incision Hook of hamate

PL

's line

Kaplan

C A

B D

E

FIGURE 1 MicroAire instruments for Agee endoscopic carpal tunnel release technique. (A) Handpiece, (B) standard endoscope, (C) Disposable Blade Assembly, (D) Hamate Finders, and (E) Synovium Elevator. FIGURE 3 Surgical markings for Agee technique of endoscopic carpal tunnel release. Source: Courtesy of Virak Tan, MD. Source: Courtesy of Virak Tan, MD.

Endoscopic Carpal Tunnel Release: Agee Technique & 307

FIGURE 4 Introduction of the Hamate Finder into the carpal canal, staying deep into the transverse carpal ligament and radial to the hamate. Source: Courtesy of Virak Tan, MD.

deﬁning the distal TCL. Thereafter, serial, distal to proximal, division of the ligament is carried out. The surgeon’s contralateral hand is used to position the wrist and provide external counter-pressure to juxtapose the endoscope blade with the undersurface of the TCL. The TCL is divided by engaging the blade on the undersurface of the ligament and slowly withdrawing it proximally. Complete division of the ligament is conﬁrmed with protruding fat or visualization of the palmaris brevis muscle (Fig. 7). Division of the muscle is not needed as it adds to postoperative pain and prolongs recovery. Engaging the blade too deeply may result in injury to the palmaris brevis, intramuscular vessels, cutaneous nerves within the palm, or even the ulnar neurovascular bundle. After endoscope removal, another centimeter of antebrachial fascia can divided proximal to the incision under direct visualization with tenotomy scisscors, as warranted. Often this proximal antebrachial fascia can result in persistent carpal tunnel symptoms, especially after minimally invasive or short-incision open CTR. At the end of the procedure, the tourniquet is deﬂated. Any bleeding can be controlled with manual pressure applied to the area of surgery for ﬁve minutes while elevating the hand above the level of the heart. Remaining cutaneous bleeding at the incision site may be controlled with bipolar electrocautery.

FIGURE 5 Insertion of the assembled endoscope into the carpal tunnel. Source: Courtesy of Virak Tan, MD.

FIGURE 6 Endoscopic visualization of the undersurface of the transverse carpal ligament. Source: Courtesy of Virak Tan, MD.

The wound is irrigated and bupivicaine injected around the incision. Skin is closed in a simple, single-layered fashion. A soft dressing is applied. Postoperatively, the patient is encouraged to use the hand immediately for light tasks such as handling paper or holding a cup. The surgical dressing is removed after twenty-four hours. At two weeks, the patient may carry up to ten pounds. The patient is allowed to return to work between 10 and 14 days with the above restrictions. Full, unrestricted activity is allowed at four weeks and the patient is also instructed on scar massage.

FIGURE 7 Endoscopic visualization after division of the TCL, showing a gap between the two ends. The subcutaneous fat and palmaris brevis muscle can be seen superﬁcial to the divided TCL. Abbreviation: TCL, tranverse carpal ligament. Source: Courtesy of Virak Tan, MD.

308 & Sheikh et al.

& COMPLICATIONS AND THEIR MANAGEMENT As with any arthroscopic or endoscopic procedure, ECTR is vitally dependent on the surgeon’s ability to visualize structures through the scope. Any impediment in visualization can render the procedure impossible to safely complete without conversion to an open technique. Various causes exist for inadequate endoscopic visualization: faulty camera hardware, inadequate light source, fogging of the lens, inadequate exsanguination of tissues, and anomalous anatomy. Progressing with the procedure with less than optimal visualization is unsafe and increases the risk of complications and incomplete division of the TCL. If the endoscopic procedure cannot be performed safely, it should be abandoned and converted to an open CTR. When converting to an open procedure, the transverse skin incision should be incorporated into a zig-zag incision across the wrist ﬂexion crease to decrease the risk of scar contracture postoperatively. Alternatively, a skin bridge can be left between the endoscopic and open carpal tunnel incisions. Other reasons for conversion to an open technique include uncontrollable bleeding after tourniquet deﬂation, intraoperative tendon or nerve laceration, inability to conﬁrm complete division of the TCL, unclear or abnormal anatomy, or unexpected discovery of carpal tunnel pathology (mass, extensive synovitis, etc.). Any known intraoperative complication should be addressed during the open procedure.

& OUTCOMES Nocturnal awakening and provocation or exacerbation of parasthesias should resolve almost immediately. Subjective numbness of digits may take as along as several months to resolve depending on degree of nerve injury preoperatively. Similarly, thenar wasting or weakness may also take several months to reach ﬁnal recovery levels. Although sensory recovery is usually near complete, muscle strength is dependent on degree and length of neuromuscular injury preoperatively. In their multi-center trial, Agee et al. (24) reported on 122 patients (147 hands) who were randomized to the endoscopic (nZ82 hands) versus open (nZ65 hands) techniques. For patients in the ECTR group with one affected hand, the median time for return to work was 21.5 days less than that for the open carpal tunnel group. Two patients who had ECTR required reoperation; one had incomplete release of the TCL. Two patients in the device group also experienced transient ulnar neurapraxia. In 2002, Trumble et al. (27) published a prospective, randomized, multicenter center study comparing open CTR to ECTR using the Agee technique. The open method was performed in 95 hands in 72 patients, and the Agee method was performed in 97 hands in 75 patients. The authors found that during the ﬁrst three months after surgery, the patients treated with the Agee method had better Carpal Tunnel Syndrome Symptom Severity Scores, Carpal Tunnel Syndrome Functional Status Scores, and subjective satisfaction scores. These patients also had signiﬁcantly greater grip strength, pinch strength, and hand dexterity. Patients who had open CTR had more scar tenderness and longer time off from work during the same time frame. In this series, the rate of complications and cost of surgery between the two groups were not signiﬁcantly different. Schonauer, Varma and Belcher (28) reported on 565 consecutive ECTR by a single surgeon using a modiﬁed Agee technique. There was 4.4% rate of conversion to the open technique because of inadequate visualization, tight carpal canal, tourniquet failure, and aberrant anatomy. Postoperatively, immediate

symptomatic relief was reported in 99.5%. There were 25 complications including pillar pain (8 wrists), digital neuropraxia (nZ6), median nerve contusion (nZ3), incomplete division of the TCL (nZ3), superﬁcial infection (nZ3), reﬂex sympathetic dystrophy (nZ1), and scar tenderness (nZ1). The authors concluded that their modiﬁed Agee technique can result in good outcome but also recommended caution in performing ECTR in patients who may have small wrists because of the risk of median nerve contusion.

& SUMMARY The Agee ECTR technique represents a single-portal, minimally invasive procedure to treat patients with median nerve compression at the wrist who meet the criteria for surgery. General advantages of this technique over open CTR include: & & & &

less scar tenderness decreased pillar pain faster recovery of pinch and grip strength, and earlier return to work and daily activities.

Moreover, the Agee technique has the advantage of being a single incision technique that utilizes a blade system that readily attaches to the standard endoscopic equipment that is widely available in most medical centers. However, as in any surgical and especially endoscopic procedure, safety and success are dependent upon patient selection, thorough knowledge of the surface and surgical anatomy, adequate training, and familiarity with the use and capabilities of the instrumentation. Surgeons who are not familiarized with endoscopic equipment and technique may give rise to major iatrogenic complications.

& REFERENCES 1. 2. 3. 4. 5.

6. 7. 8. 9. 10. 11.

Concannon MJ, Gainor B, Petroski GF, Puckett CL. The predictive value of electrodiagnostic studies in carpal tunnel syndrome. Plast Reconstr Surg 1997; 100:1452–8. Atroshi I, Gummesson C, Johnsson R, et al. Prevalence of carpal tunnel syndrome in a general population. JAMA 1999; 282:153–8. deKrom MC, Kester AD, Knipschild PG, et al. Risk factors for carpal tunnel syndrome. Am J Epidemiol 1990; 132:1102–10. Franzblau A, Werner RA, Valle J, et al. Workplace surveillance for carpal tunnel syndrome: a comparison of methods. J Occup Rehabil 1993; 3:1–14. Homan MM, Franzblau A, Werner RA, et al. Agreement between symptom surveys, physical examination procedures and electrodiagnostic ﬁndings for carpal tunnel syndrome. Scand J Work Environ Health 1999; 25:115–24. Franklin GM, Haug J, Heyer N, et al. Occupational carpal tunnel syndrome in Washington State, 1984–1988. Am J Public Health 1991; 81:741–6. Nordstrom DL, DeStefano F, Vierkant RA, et al. Incidence of diagnosed carpal tunnel syndrome in a general population. Epidemiology 1998; 9:342–5. Stevens JC, Sun S, Beard CM, et al. Carpal tunnel syndrome in Rochester, Minnesota, 1961–1980. Neurology 1988; 38:134–8. Mondelli M, Giannini F, Giacchi M. Carpal tunnel syndrome incidence in a general population. Neurology 2002; 58:289–94. Mondelli M, Aprile I, Ballerini M, et al. Sex differences in carpal tunnel syndrome: comparison of surgical and non-surgical populations. Eur J Neurol 2005; 12(12):976–83. Moghtaderi A, Izadi S, Sharafadinzadeh N. An evaluation of gender, body mass index, wrist circumference and wrist ratio as independent risk factors for carpal tunnel syndrome. Acta Neurol Scand 2005; 112(6):375–9.

Endoscopic Carpal Tunnel Release: Agee Technique & 309 12. Nathan P, Istvan J, Meadows K. A longitudinal study of predictors of research-deﬁned carpal tunnel syndrome in industrial workers: ﬁndings at 17 years. J Hand Surg [Br] 2005; 30(6):593–8. 13. Lim J, Cho S, Han TR, et al. Dose-responsiveness of electrophysiologic change in a new model of acute carpal tunnel syndrome. Clin Orthop 2004; 427:120–6. 14. Chow JCY, Weiss MA, Gu Y. Anatomic variations of the hook of hamate and the relationship to carpal tunnel syndrome. J Hand Surg [Am] 2005; 30(6):1242–7. 15. Werner RA, Franzblau A, Gell N, et al. Incidence of carpal tunnel syndrome among automobile assembly workers and assessment of risk factors. J Occup Environ Med 2005; 47(10):1044–50. 16. Michelsen H, Posner MA. Medical history of carpal tunnel syndrome. Hand Clin 2002; 18(2):257–68. 17. Okutsu I, Hamanak I, Chiyokura Y, et al. Intraneural median nerve pressure in carpal tunnel syndrome. J Hand Surg [Br] 2001; 26(2):155–6. 18. Sanz J, Lizaur A, Sanchez Del Campo F. Postoperative changes of carpal canal pressure in carpal tunnel syndrome: a prospective study with follow-up of 1 year. J Hand Surg [Br] 2005; 30(6):611–4. 19. Phalen GS, Gardner WJ, La Londe AA. Neuropathy of the median nerve due to compression beneath the carpal ligament. J Bone Joint Surg Am 1950; 32:109–12. 20. Tzaan W, Lui T, Lee S. Midpalmar accurate incision for carpal tunnel release. Chang Gung Med J 2005; 28(2):97–103.

21. Boeckstyns MEH, Sorensen AI. Does endoscopic carpal tunnel release have a higher rate of complications than open carpal tunnel release? J Hand Surg [Br] 1999; 24:9–15. 22. Nath RK, Mackinnon SE, Weeks PM. Ulnar nerve transection as a complication of two-portal endoscopic carpal tunnel release: a case report. J Hand Surg [Am] 1993; 18:896–8. 23. Murphy RX, Jennings JF, Wukich DK. Major neurovascular complications of endoscopic carpal tunnel release. J Hand Surg [Am] 1994; 19:114–8. 24. Agee JM, McCarroll HR, Jr., Tortosa RD, et al. Endoscopic release of the carpal tunnel: a randomized prospective multicenter study. J Hand Surg [Am] 1992; 17:987–95. 25. Teoh LC, Tan PL. Endoscopic carpal tunnel release for recurrent carpal tunnel syndrome after previous open release. Hand Surg 2004; 9(2):235–9. 26. Mackinnon SE, McCabe S, Murray JF, et al. Internal neurolysis fails to improve the results of primary carpal tunnel decompression. J Hand Surg [Am] 1991; 16(2):211–8. 27. Trumble TE, Diao E, Abrams R, et al. Single-portal endoscopic carpal tunnel release compared with open carpal tunnel release: a prospective randomized trial. J Bone Joint Surg Am 2002; 84:1107–15. 28. Schonauer F, Varma S, Belcher HJCR. Endoscopic carpal tunnel release: practice in evolution. Scand J Plast Reconstr Surg Hand Surg 2003; 37:360–4.

Part VIII: Tendons and Soft Tissues

40 Percutaneous Trigger Finger Release Min Jong Park Department of Orthopedic Surgery, Samsung Medical Center, Sungkyunkwan University School of Medicine, Seoul, Korea

& INTRODUCTION Trigger finger is one of the most common problems seen in the clinical practice of orthopedic surgery. It is caused by a disproportion between the flexor tendons and their sheath, and it presents with painful triggering or locking of the affected digit during finger motion. The most common form of trigger finger is the primary type, which is found most frequently among middle-aged women, two to six times more commonly than it is observed in men. The most commonly affected digit is the thumb, followed by the long, ring, index, and little fingers. The involvement of several fingers is not unusual. Secondary trigger finger can be found in patients with diabetes, gout, renal disease, and rheumatoid diseases, and it is associated with a worse prognosis after conservative management. The main pathology of entrapment is mechanical impingement of the flexor tendons as they pass through the narrowed first annular (A1) pulley at the level of the metacarpal head. Thus, the goal of treatment is to provide a painless, smooth, and full range of finger motion. As a conservative method of treatment, steroid injection has been commonly recommended (1). Although this treatment is simple and has low morbidity, it may be associated with a high failure rate, and repeated injections are usually required because of a high recurrence rate. In reported series of injection therapy, the success rate varied from 37.5% to 84% (1–4). This therapy appears to be less useful in more advanced cases. Rhoades et al. observed that patients with symptoms of less than four months’ duration achieved a success rate of 93% after steroid injection, while those with symptoms of greater than four months achieved a 41% success rate (5). Newport et al. reported that patients who had symptoms for more than six months were more likely to require surgery (4). When conservative treatments fail to relieve the symptoms, surgical release of the A1 pulley by open technique is generally recommended (6,7). The most attractive aspect of operative management may be its ability to provide a permanent cure. Open trigger finger release is considered a simple and reliable procedure, but entails making a 1 to 2 cm incision in the palm directly the A1 pulley. The subcutaneous tissue is dissected bluntly off the pulley, which is then released under direct visualization. Successful results have been reported with this technique, but it is not without complications. These include infection, digital nerve injury, joint stiffness, hand weakness, scar tenderness, and bowstringing of the flexor tendons (8–10). Since Lorthioir described a technique of percutaneous release of the A1 pulley using a fine tenotome in 1958 (11), several techniques for percutaneous release using a variety of cutting instruments have been described as simple office procedures (12–21). Percutaneous release, if it is equally

effective and safe, would avoid the time and expense of an open surgical procedure. It also has the advantage of avoiding complications that are closely related with the open procedure, such as infection, incisional pain, hypertrophic scarring, and delayed use of the hand, which may be due to the development of reflex sympathetic dystrophy or stiffness.

& INDICATIONS The clinical course of trigger finger is generally divided into four stages as follows, depending on the degree of the tendon catching during the motion of the affected digit (15,19) &

& & &

Grade 1: No triggering, only uneven movements during finger motion Grade 2: Triggering, actively correctable Grade 3: Triggering, passively correctable by the other hand Grade 4: Locked and uncorrectable. Patients who have a locked trigger digit can present either with a fixed flexion contracture at the proximal interphalangeal (PIP) joint or with an inability to fully flex the affected digit from an extended position.

Percutaneous release of the A1 pulley is mainly indicated when the symptoms fail to be relieved by conservative treatment, including steroid injections. As the procedure can be simply performed in the office under local anesthesia without specific preparations, it is relatively indicated as a first-line treatment in patients with severe or longstanding symptoms, who are more likely to require surgery. In this author’s clinical practice, percutaneous technique is recommended in those patients who have had symptoms for more than four months, or have Grade 3 or 4 triggering at the time of their initial presentation. Others find locked trigger digits (i.e., Grade 4) as a contraindication to percutaneous techniques because of a higher failure rate (22). Although the percutaneous release of the locked digits seems to have a higher failure rate than that of other trigger digits, it is believed that locked trigger digits can be released safely and effectively by percutaneous method if several technical points are considered, which are discussed below. Another issue with respect to indications of the percutaneous technique is whether it can be performed in children with a trigger digit. Although some authors have reported successful results (23), it should be performed cautiously for the following reasons: (i) due to anxiety pediatric patients may not be able to stay still and confirm complete release with just local anesthesia, which risks safety during the procedure, (ii) if general anesthesia is required, the patient will not be able to actively move the digit intraoperatively to determine that a complete release has been achieved, and (iii) almost all trigger

312 & Park

phenomena in children occur at the thumb, which has the increased risk of nerve injury due to the proximity of the digital nerves to the A1 pulley. The potential for nerve injury is significantly increased in children because of the small size of their thumbs. In patients with secondary triggering, such as tenosynovitis, percutaneous release is generally not recommended because of unpredictable results.

& CONSIDERATIONS FOR PREOPERATIVE PLANNING Trigger digit can be diagnosed easily when “catching” is described by patients during active finger motion. Additionally, there is tenderness volarly over the A1 pulley at the metacarpal head. At a more advanced stage, locking of the flexor tendons in the A1 pulley develops, which results in an inability to fully flex or passively extend the affected digit. It should be noted that many patients, particularly with locked trigger digits, can have painful secondary contractures at the PIP joint or at the interphalangeal (IP) joint of the thumb. Although this is considered secondary to reluctance of the patients to perform a full range motion of the digits over time, it is frequently the main cause of pain and discomfort. Due to stiffness at the PIP joint and the absence of typical triggering, the patient or examining physician often localizes the pathology incorrectly at the PIP joint. In such a situation, the presence of a triggering history before the development of locking would contribute in making the correct diagnosis. When the triggering history is unclear, tenderness at the metacarpal head should be checked. Rarely, localized enlargement of the flexor digitorum profundus can trigger at a stenotic A3 pulley and lead to persistence of symptoms after release of the A1 pulley. Trigger digits in patients with rheumatoid arthritis may be due to synovitis along the flexor tendons and profundus entrapment at the superficialis decussation. If the percutaneous release is determined to be indicated after the diagnosis is made, no imaging study is usually needed. However, when the PIP joint is unusually stiff and painful, plain X rays may be required to rule out articular problems. If fixed contracture of PIP is considered secondary to advanced stage of triggering, percutaneous release can still be tried as a first-line treatment. If the PIP contracture is resistant to manual stretching after percutaneous release, it may require surgical release. However, such case is very rare unless the PIP has intraarticular problems.

& SURGICAL TECHNIQUE Since Eastwood et al. described the percutaneous method using a hypodermic needle to section the A1 pulley (15), the hypodermic needle has been used most frequently among a variety of cutting instruments. Following is the brief description of this hypodermic needle procedure. The A1 pulley is palpated directly over the metacarpal head in the palm, and the skin and flexor tendon sheath are infiltrated with 1 to 2 mL of 1% lidocaine using a 27-gauge needle. With the affected metacarpophalangeal joint held firmly in hyperextension, a 19- or 21-gauge needle is placed percutaneously through the A1 pulley. Placement of the needle tip within the flexor tendon is confirmed by asking the patient to slightly flex the digit and observing movement of the hub of the needle. The needle is then withdrawn slowly and rotated to align the beveled edge along the longitudinal axis of the tendon. A sawing motion is used to section the A1 pulley proximally

FIGURE 1 Percutaneous release of a long finger first annular (A1) pulley using a hypodermic needle. The bevel of the needle is oriented longitudinally with the tendon, and a sawing motion is used to section the A1 pulley.

and distally to the site (Fig. 1). Disappearance of a grating sensation indicates complete sectioning of the A1 pulley. My experience with the Eastwood technique demonstrated that it was not always successful because the needle bents easily and did not cut well when the A1 pulley was thickened and stenotic. It was also not easy to handle the needle because of the small hub and there was a steep learning curve. As a modified technique, a specially designed knife (HAKI knife; BK Meditech Inc., Seoul, Korea) has been developed (17), which has a hookshaped end with a blade only on the inner side and a pointed end to facilitate its insertion into the skin without making an incision. The depth of the blade which is for section of the A1 pulley is less than 1 mm to prevent injury to the flexor tendons (Fig. 2). It is designed to cut the transverse fibers of the A1 pulley longitudinally from a proximal to distal direction after it is inserted distal to the A1 pulley (Fig. 3). The procedure is generally performed in the outpatient setting under local anesthesia. The patient is placed in a supine position with the affected hand on the examination table. The surgeon sits on the distal side of the affected hand. The point of triggering at the A1 pulley is located by palpation (Fig. 4).

FIGURE 2 A specially designed knife (HAKI knife; BK Meditech Inc., Seoul, Korea) for percutaneous first annular pulley release. It has a hookshaped end with a blade on the inner side and a pointed end to facilitate its insertion into the skin.

Percutaneous Trigger Finger Release & 313

FIGURE 5 One percent of lidocaine is infiltrated into the skin, subcutaneous tissue, and tendon sheath using a 27-gauge needle inserted over the point of knife entry. FIGURE 3 The technique of first annular (A1) pulley release using HAKI knife. After the knife is introduced distally to the pulley, the blade is advanced to its proximal margin and hooked over the border. The A1 pulley is divided by moving the knife from a proximal to distal direction.

The skin of the palm is thoroughly cleaned and 1 mL of 1% lidocaine without epinephrine is infiltrated into the skin and subcutaneous tissue by means of a needle inserted directly over the point of knife entry (Fig. 5). The relationship of the surface anatomy of the palm to the A1 pulley needs to be reviewed in order to identify the exact point of knife entry. Several studies (11,24) have demonstrated that the proximal edge of the A1 pulley coincides almost exactly with the proximal palmar crease in the index finger, halfway between the proximal and distal palmar creases in the middle finger, the distal palmar crease in the ring and little fingers. In the thumb, metacarpophalangeal crease indicates the middle of the A1 pulley (Fig. 6). The knife is introduced a few millimeters distal to the A1 pulley, which coincides with the point approximately 1.5 cm distal to the landmarks that indicate the proximal edge of the A1 pulley. The precise locations of the knife entry are important for successful release. An incomplete

FIGURE 4 Percutaneous first annular (A1) pulley release of a ring finger in a patient with longstanding triggering. The point of triggering at the A1 pulley is palpated after skin preparation.

FIGURE 6 Surface anatomy of the palm to the first annular (A1) pulley. The proximal edge of the A1 pulley coincides with the proximal palmar crease in the index finger; halfway between the proximal and distal palmar creases in the middle finger; at the distal palmar crease in the ring and little fingers. In the thumb, metacarpophalangeal (palmodigital) crease indicates the middle of the A1 pulley. The knife is introduced 1.5 cm distal to the landmarks that indicate the proximal edge of the A1 pulley (round dot). The precise locations of the knife entry are important for successful release.

314 & Park

release might result from an inaccurate proximal insertion of the knife. If the knife is inserted too distally, excessive cutting extending to the A2 pulley would be a risk. Once the hook-shaped point is inside the skin (Fig. 7), the knife is extended to the proximal edge of the A1 pulley, palpating the surface of the pulley with the tip of the knife. The tip of the knife is used to identify the step-off of the proximal margin of the fibrous pulley and the blade is placed at the proximal margin. The A1 pulley is sectioned longitudinally by moving the knife from proximal to distal (Figs. 3 and 8). It usually requires several repeated motions to complete the section. A grating sensation and sound indicate the cutting of the A1 pulley. When the grating sensation and sound stop, the knife is withdrawn and relief of clicking or locking is confirmed by the patient during active flexion and extension of the digit. The surgeon should confirm complete release by digital palpating over the metacarpal head and observing full active finger motion without any sense of triggering or uneven motion (Fig. 9). If the release is incomplete, the procedure might be repeated one or two times until the clicking or locking is relieved. Conversion to an open surgical procedure is recommended when it fails after three attempts. The procedure usually takes two to four minutes. For percutaneous release of the trigger thumb, the location of the A1 pulley needs to be outlined carefully. By positioning the patient’s thumb in abduction, slightly flexing the wrist, and hypersupinating the forearm, the volar surface of the thumb is positioned facing the surgeon. The knife is inserted 1 cm distal to the metacarpophalangeal crease, in the center of the thumb after local infiltration of the subcutaneous tissue and the flexor tendon sheath (Figs. 10 and 11). The proximal edge of the A1 pulley is identified with the tip of the knife blade proximal to the metacarpophalangeal crease level. It is important not to extend the tip of the knife too proximally because of the proximity of the radial digital nerve. The remaining procedure is the same as that for the fingers as described above. After the procedure, an adhesive strip bandage is applied and the patient is advised to flex and extend the digit several times a day until full movement is restored. The patient is recommended to passively assist full flexion and extension of the affected digit with the opposite hand when the finger joint is stiff after the procedure. Some patients require hand therapy for residual stiffness of the joints.

FIGURE 7 The knife can be easily inserted into the skin with its pointed end. After its insertion, the knife is advanced proximally to the proximal edge of the first annular pulley while palpating the surface of the pulley with the tip of the knife. The hook-shaped blade is placed at the proximal margin.

FIGURE 8 The first annular (A1) pulley is sectioned longitudinally by moving the knife from proximal to distal. A grating sensation indicates the cutting of the A1 pulley.

Several technical points need to be remembered for patients with locked digits. In contrast to an open release, complete sectioning of the A1 pulley cannot be confirmed by visualization during the percutaneous method. In the percutaneous release, adequate release of the A1 pulley is confirmed by complete disappearance of a triggering phenomenon. However, when the digit is locked instead of merely triggering, it is difficult to accurately evaluate the status of the A1 pulley after the percutaneous release. This may have caused some authors to believe that the percutaneous method is not indicated for locked trigger digits. During the initial trial period of the HAKI knife technique, locked cases accounted for the majority of failed cases among the percutaneous trigger releases performed by this author. For a successful release in the locked digits, it is essential to accurately locate the insertion point to prevent an inadequate release because it is difficult to confirm the site of triggering by palpation alone. Confirmation of a successful release must be made by both the surgeon and the patient while the affected fingers are anesthetized by intrathecal injection. As it can be difficult to differentiate incomplete release from a painful stiff interphalangeal joint, a local infiltration of anesthetic into the flexor sheath (intrathecal) is helpful. Even in

FIGURE 9 Complete release should be confirmed by the surgeon by palpating with the finger tip over the metacarpal head and observing full active finger motion without any sense of triggering or uneven motion.

Percutaneous Trigger Finger Release & 315

FIGURE 10 Percutaneous release of the trigger thumb. Note the position of the patient’s hand with the thumb in abduction and the forearm in hypersupination to make the volar surface of the thumb facing to the surgeon. The knife is inserted 1 cm distal to the metacarpophalangeal crease in the center of the thumb.

the setting of a secondary stiff finger joint, near active full range of motion can be achieved when the pain is eliminated with the intrathecal injection. If stiffness is severe but passively correctable, the surgeon can take the digit through a passive range of motion to assure that there is no “clicking” or “catching”. Once the surgeon and the patient are assured about the complete release, the patient is advised to perform vigorous passive flexion and extension exercises of the released digit with the opposite hand until full painless motion is restored.

& COMPLICATIONS AND THEIR MANAGEMENT Several authors have pointed out the potential risk of nerve injury when the percutaneous technique is used in the thumb

Radial digital n.

due to the proximity of the digital nerves to the A1 pulley (15,24,25). The radial digital nerve passes diagonally across the flexor pollicis longus tendon from the ulnar to the radial side. The site of the crossing is a few millimeters proximal to the metacarpophalangeal flexion crease of the thumb (Fig. 11). Digital nerve injuries have been reported as infrequent but serious complications of an open release (8,10), but there have been no reported instances of digital nerve injury after a percutaneous release. The author believes that HAKI knife is particularly effective in avoiding nerve injuries, since the knife is introduced through the skin at a point distal to the pulley where the nerve is located well on the lateral side of the thumb (Fig. 11). This is in contrast to the techniques of other authors, who inserted the needle or knife more proximally over the metacarpophalangeal crease. However, care must be taken to keep the tip of the knife in contact with the pulley surface during its proximal advancement, and not to extend the knife too proximally. The author does not recommend more than three repeated trials of the percutaneous release. Since the percutaneous technique was started in 1995, no nerve injuries were encountered after more than 1200 procedures. Injuries to the flexor tendon have been described in articles reporting the results of the percutaneous technique (15,19). Bain et al. observed some form of injury to the majority of tendons, ranging from simple lacerations to significant injuries on exploration after trials of percutaneous release on cadaveric hands using a 14-gauge angiocath needle (24). They recommended keeping the needle in a superficial position in order to minimize the flexor tendon injury. However, it is difficult to maintain the needle at a constant level in the soft tissue to minimize tendon injury and achieve the pulley release. The blade portion of HAKI knife has a constant depth of less than 1 mm, which would help prevent injury to the flexor tendon by a cutting blade. Flexion contracture of the PIP joint with pain observed at the postoperative period is not uncommon, particularly in diabetic patients. These patients may not be fully satisfied with their results because they still have painful limited joint motion. The main reason is due to inadequate hand therapy after the procedure. If a complete release is confirmed after the procedure, it is also important to inform the patient that the triggering will not occur and that the stiffness of the interphalangeal joint should recover by repeated passive motion exercise. This postoperative care is essential, particularly for diabetic patients. Care needs to be taken not to violate the proximal edge of the A2 pulley in order to prevent the potential for bowstringing and loss of digital flexion. Precise localization of the entry point of the knife is essential to avoid this. If the knife is inserted too distally, excessive cutting extending to the A2 pulley would be a risk. Discomfort or pain associated with the procedure can persist, but they usually disappear within several days or weeks after the procedure.

& OUTCOMES

FIGURE 11 The radial digital nerve of the thumb has a potential risk of injury due to its proximity to the first annular pulley during percutaneous release. Distal insertion of the knife (arrow) is helpful in avoiding nerve injuries, but care must be taken to keep the knife tip in contact with the pulley surface during its proximal advancement, and not to advance the knife too proximally.

All authors who described the percutaneous technique of A1 pulley release invariably reported satisfactory results with a high success rate and few complications. To the best of author’s knowledge, there have been no reported nerve or vascular complications associated with the percutaneous trigger finger release. Lorthioir was the first to describe a technique of subcutaneous release of the A1 pulley using a fine tenotome. He reported good results in 52 patients with no complications

316 & Park

(11). Eastwood et al. reported excellent results in 94% following release of 35 trigger digits using a hypodermic needle (15). Tanaka et al. reported excellent results in 64% following percutaneous release of 210 trigger digits with a fine scalpel (21). Lyu reported excellent results in 89% of 63 digits that underwent release with a curved scalpel blade (18). Our early series demonstrated that 11 out of 185 digits (5.9%) failed to achieve relief of triggering with the first attempt (17). These included six thumb, three middle, and two ring fingers. The majority of the failed cases (nine of the 11 digits) were digits in a locked state at the time of their initial presentation. The main reason for failure in the locked digits might be a difficulty in confirming the complete relief of locking by the patients and surgeons. It should be remembered that the evaluation of the motion of the affected digit under the intrathecal block at the time of the percutaneous release is the most important step for confirming an adequate A1 pulley release and reducing the failure rate. A recent review of author’s experience demonstrated that the success rate has increased to 98%, and locked digits are no longer considered as a majority of failed cases (unpublished data).

& REFERENCES 1. 2.

3.

4. 5.

6. 7. 8.

9. 10.

& SUMMARY

11.

A number of authors demonstrated that the percutaneous A1 pulley release for trigger digits is equally effective and safe as an open technique, and it avoids the time, expense, and complications related with surgical procedure. It can be performed easily, quickly, and safely in an outpatient or office setting. The procedure itself is well tolerated by most patients, and the discomfort associated with it compares favorably with that associated with steroid injection. Therefore, percutaneous trigger finger release is believed to be the indicated treatment of choice for:

12.

& & & &

cases that failed conservative treatment, cases when the symptoms last for more than four months, Grade 3 (locking but passively correctable), and Grade 4 (a locked digit) triggering is present.

13.

14.

15.

16.

17. 18.

& SUMMATION POINTS

Indications &

19.

20.

Failure of conservative treatment 21.

Relative contraindications & &

Trigger finger in children Locked digit

Outcomes &

94% to 98% successful A1 pulley release on first attempt

22. 23.

24.

Complications & &

Inadequate release in 2% to 6% No reported injury to digital nerve or flexor tendon

25.

Marks M, Gunther S-A. Efficacy of cortisone injection in treatment of trigger fingers and thumbs. J Hand Surg [Am] 1989; 14A:722–7. Fauno P, Anderson H, Simonsen O. A long-term follow-up of the effect of repeated corticosteroid injections for stenosing tenovaginitis. J Hand Surg [Br] 1989; 14(2):242–3. Lambert M, Morton R, Sloan J. Controlled study of the use of local steroid injection in the treatment of trigger finger and thumb. J Hand Surg [Br] 1992; 17:69–70. Newport M, Lane L, Stuchin S. Treatment of trigger finger by steroid injection. J Hand Surg [Am] 1990; 15:748–50. Rhoades C, Gelberman R, Manjarris J. Stenosing tenosynovitis of the fingers and thumb. Results of a prospective trial of steroid injection and splinting. Clin Orthop 1984; 190:236–8. Benson L, Ptaszek A. Injection versus surgery in the treatment of trigger finger. J Hand Surg [Am] 1997; 22:138–44. Turowski G, Zdankiewicz P, Thomson J. The results of surgical treatment of trigger finger. J Hand Surg [Am] 1997; 22:145–9. Carrozzella J, Stern P, Von Kuster L. Transection of radial digital nerve of the thumb during trigger release. J Hand Surg [Am] 1989; 14:190–200. Heithoff S, Millender L, Helman J. Bowstringing as a complication of trigger finger release. J Hand Surg [Am] 1988; 13:567–70. Thorpe A. Results of surgery for trigger finger. J Hand Surg [Br] 1988; 13:199–201. Lorthioir J. Surgical treatment of trigger finger by a subcutaneous method. J Bone Joint Surg [Am] 1959; 40:793–5. Blumberg N, Arbel R, Dekel S. Percutaneous release of trigger digits. J Hand Surg [Br] 2001; 26(3):256–7. Cihantimur B, Akin S, Ozcan M. Percutaneous treatment of trigger finger. 34 fingers followed 0.5–2 years. Acta Orthop Scand 1998; 69(2):167–8. Dunn MJ, Pess GM. Percutaneous trigger finger release: a comparison of a new push knife and a 19-gauge needle in a cadaveric model. J Hand Surg [Am] 1999; 24(4):860–5. Eastwood DM, Gupta KJ, Johnson DP. Percutaneous release of the trigger finger: an office procedure. J Hand Surg [Am] 1992; 17(1):114–7. Gilberts EC, Beekman WH, Stevens HJ, Wereldsma JC. Prospective randomized trial of open versus percutaneous surgery for trigger digits. J Hand Surg [Am] 2001; 26(3):497–500. Ha KI, Park MJ, Ha CW. Percutaneous release of trigger digits. J Bone Joint Surg [Br] 2001; 83(1):75–7. Lyu S. Closed division of the flexor tendon sheath for trigger finger. J Bone Joint Surg [Br] 1992; 74:418–20. Patel MR, Moradia VJ. Percutaneous release of trigger digit with and without cortisone injection. J Hand Surg [Am] 1997; 22(1):150–5. Ragoowansi R, Acornley A, Khoo CT. Percutaneous trigger finger release: the ‘lift-cut’ technique. Br J Plast Surg 2005; 58(6):817–21. Tanaka J, Muraji M, Negoro H, Yamashita H, Nakano T, Nakano K. Subcutaneous release of trigger thumb and fingers in 210 fingers. J Hand Surg [Br] 1990; 15:463–5. Park MJ, Oh I, Ha KI. A1 pulley release of locked trigger digit by percutaneous technique. J Hand Surg [Br] 2004; 29(5):502–5. Wang HC, Lin GT. Retrospective study of open versus percutaneous surgery for trigger thumb in children. Plast Reconstr Surg 2005; 115(7):1963–70. Bain GI, Turnbull J, Charles MN, Roth JH, Richards RS. Percutaneous A1 pulley release: a cadaveric study. J Hand Surg [Am] 1995; 20(5):781–4 (discussion 785-6). Pope DF, Wolfe SW. Safety and efficacy of percutaneous trigger finger release. J Hand Surg [Am] 1995; 20(2):280–3.

41 Endoscopic DeQuervain’s Release Joseph F. Slade III

Hand and Upper Extremity Service, Department of Orthopedics and Rehabilitation, Yale University School of Medicine, New Haven, Connecticut, U.S.A.

Greg Merrell

Department of Orthopedics, Brown University School of Medicine, Providence, Rhode Island, U.S.A.

& INTRODUCTION There are three reasons to consider an endoscopic approach to ﬁrst dorsal compartment release rather than a traditional open release. First, the results of open release, when viewed critically, still have a number of complications. Second, the incisions for an endoscopic release are outside the area of maximal sensitivity. Third, we hypothesize that an endoscopic release may allow for a localized neurectomy. On the ﬁrst point, a study by Harvey et al. demonstrates scar adherence to the underlying tendon in two out of 20 surgical patients and temporary parathesias of the radial sensory nerve in three patients (1). Arons et al. describes 14 complications in 16 consecutive patients including three hypertrophic painful scars, one tendon subluxation, two neuroma’s, and three adhesions (2). A study by Ta et al. shows 2% with severe scar tenderness, a 5% recurrence rate, and a 2% sensory nerve injury out of 43 patients (3). There have been other case reports of palmar subluxation of the tendon following operative release (4). Clearly, although surgical treatment of DeQuervain’s is perceived as a simple and effective surgical procedure, when examined closely, there is a need for improvement. On the second and third point, we believe that not only is there mechanical constriction from the restrictive tendon sheath, but also an element of peripheral nerve hypersensitivity. The endoscopic approach allows us to keep our incisions outside of the hypersensitized zone of injury. Additionally, we hypothesize that an arthroscopic approach allows for an extensive neurectomy of the tiny branches of the superﬁcial radial nerve (SRN), which may innervate the ﬁrst dorsal compartment. Therefore, the minimally invasive approach along with this neurectomy may result in faster and more complete pain relief, with less risk for painful scar development. Finally, with the proper training, we believe this to be a safe technique. We must be clear that at this point, the neurectomy component of the procedure is strictly a working hypothesis and not yet substantiated by substantial basic science and clinical research.

& INDICATIONS AND CONTRADICTIONS Any patient with a ﬁrst dorsal compartment tenosynovitis who has failed conservative treatment of splinting and/or injections and has not previously undergone a release would be a candidate for endoscopic release. We have not yet performed an arthroscopic release on a patient with recurrent symptoms that failed previous open surgery. This would be a relative

contraindication due to potential scarring and the displaced anatomy.

& SURGICAL TECHNIQUE The wrist is placed over a towel roll in a neutral position with a tourniquet inﬂated. A 5 mm superﬁcial transverse incision just distal to the thumb carpometacarpal (CMC) joint establishes the distal portal. The incision is in line with the ﬁrst dorsal compartment at the insertion of the abductor pollicis longus (APL) tendon, 2 to 3 cm distal to the end of the radial styloid. A small hemostat is used to clear the overlying subcutaneous tissue off the fascia enveloping the thumb CMC joint. A small right angle retractor elevates the subcutaneous tissue off the tendons of the ﬁrst dorsal compartment. A long narrow hemostat is next used to bluntly create a working space between the skin and subcutaneous tissue down the length of the ﬁrst dorsal compartment. A trocar and cannula are inserted above the ﬁbrous fascial sheath of the ﬁrst dorsal compartment, proximal to the radial styloid and the extensor tendon retinaculum. Next, a second 5 mm transverse incision is made over the trocar tip, approximately 4 to 6 cm proximal to the radial styloid (Fig. 1). A 2.7 mm 308 angled scope is inserted into the cannula through the proximal portal. The scope is inserted into the cannula until the tip of the scope is visible through the distal portal. The cannula is then removed. A small rightangled retractor elevates the proximal portal to maintain a working space and a dry endoscopic inspection of the ﬁrst dorsal compartment is performed beginning distally over the CMC joint. The SRN is identiﬁed as it sweeps down crossing the fascia below (Fig. 2). Long thin Mueller scissors are introduced into the distal portal and used to bluntly dissect the overlying subcutaneous tissue off of the fascia. We hypothesize that this blunt dissection sweeps off small neuroﬁbrils from the SRN which innervate the fascia of the ﬁrst dorsal compartment. We believe this procedure serves as a neurectomy as well. Although there are some corroborating anatomical studies published, much of this needs further substantiation. Next, incise the fascia of the ﬁrst dorsal compartment starting proximal to the radial styloid and moving distally (Fig. 3). The tendon slips of the APL and extensor pollicis brevis (EPB) are identiﬁed under direct visualization. To ensure release of both the EPB and APL, stabilize the ﬁrst metacarpal and manually ﬂex and extend the metacarpal phalangeal joint. Through the endoscope, the EPB tendon can be visualized gliding proximally and distally while the APL tendons remain stationary. If all tendons are either stationary or

318 & Slade and Merrell

similar to the radiation of pain that is experienced in DeQuervain’s tenosynovitis (8). We postulate that the sheath will likely eventually be reinnervated, but only after the tendon pathology has resolved, which breaks the cycle of local nerve irritation.

& POSTOPERATIVE MANAGEMENT After suture removal at seven days, the patient is allowed to resume activities without restrictions. No splints or braces are used.

& RESULTS AND OUTCOMES

FIGURE 1 Incisions for endoscopic DeQuervain’s release.

gliding, then search for a separate compartment. Postoperatively patients are placed in a volar splint. The technique achieves two goals by addressing two possible sources of pain, mechanical and neuropathic. The ﬁrst goal is to decrease the friction, which results in a restriction of tendon gliding. This is accomplished by release of the unyielding fascial compartment overlying the thumb extensor tendons. This release allows for a gradual reduction in tendon irritation. Over time, swelling decreases and the tissues recover. The second goal is to perform a neurectomy of the small SRN branches to the ﬁrst dorsal extensor compartment. Lin et al. demonstrated that the dorsal wrist capsule has an extensive array of sensory nerve endings (5). We hypothesize that a similar innervation may exist in the ﬁrst extensor compartment and may help explain the severe pain that occurs in DeQuervain’s. Berger and Weinstein have shown that ablation of the terminal portions of the anterior and posterior interosseous nerves, which supply proprioceptive ﬁbers to the wrist capsule, can be an effective treatment for a variety of chronic unreconstructable pathologies (6,7). Our endoscopic technique for DeQuervain’s release may provide pain relief through a similar denervation of the ﬁrst extensor compartment. Additional support for the neurectomy hypothesis is found in the pattern of referred pain from the APL. It has been shown to resemble the C6, 7, and 8 dermatomes. This parallels the superﬁcial radial sensory nerve distribution, and is very

In our initial series of 43 patients, there have been no infections, neuromas, or signiﬁcant scar tenderness. There have been no injuries to the SRN. No patient had to be converted to the open procedure for failure of visualization or inability to achieve appropriate release. There has been good subjective patient satisfaction and none were considered treatment failures. As with any arthroscopic surgery, it is imperative that the surgeon is comfortable with arthroscopic equipment and technique and that the relevant anatomy is fully understood.

& SUMMARY DeQuervain’s tenosynovitis is a common problem that often requires surgical treatment. The classic open approach for release of the ﬁrst dorsal compartment is not without complications and results are not uniformly excellent. Controversies that exist include location and orientation of the incision and the amount of retinaculum removed. Endoscopic treatment of this tendinopathy may be helpful in minimizing these problems.

& SUMMATION POINTS

Indications & &

DeQuervain’s tenosynovitis recalcitrant to non-operative treatment No previous surgery and normal anatomy

Outcomes & & &

Excellent results in 43 patients Good relief of pain Less wound problems and scar tenderness

N s

FIGURE 2 A small right angle retractor is used to elevate subcutaneous tissue off the fascial sheath of the ﬁrst dorsal compartment. Endoscopic visualization of SRN and ﬁrst dorsal compartment sheath below. Mueller scissors used to dissect soft tissue and microscopic innervations to the ﬁrst dorsal compartment sheath from the SRN under direct vision. Abbreviations: N, nerve; S, sheath; SRN, superﬁcial radial nerve.

Endoscopic DeQuervain’s Release & 319

T

N

S S

S T

Complications &

Similar to open technique

& REFERENCES 1. Harvey FJ, Harvey PM, Horsely MW. De Quervain’s disease: surgical or nonsurgical treatment. J Hand Surg 1990; 15A:83–7. 2. Arons MS. De Quervain’s release in working women: a report of failure, complications and associated diagnoses. J Hand Surg 1987; 12A:540–4. 3. Ta KT, Eidelmen D, Thomson JG. Patient satisfaction and outcomes of surgery for de Qeurvain’s tenosynovitis. J Hand Surg 1999; 24A:1071–7.

FIGURE 3 Endoscopic release of the sheath. Endoscopic image on the left shows beginning of the fascial sheath release of the ﬁrst dorsal compartment, underlying tendons, and superﬁcial radial nerve. Endoscopic image on the right showing complete release of ﬁrst dorsal compartment sheath with underlying tendons. Abbreviations: N, nerve; S, sheath; T, tendons. 4. White GM, Weiland AJ. Symptomatic palmar tendon subluxation after surgical release for de Quervain’s disease. J Hand Surg 1984; 9A:704–6. 5. Lin YT, Berger RA, Berger EJ, et al. Nerve endings of the wrist joint: a preliminary report of the dorsal radiocarpal ligament. J Orthop Res 2006; 24(6):1225–30. 6. Berger RA. Partial denervation of the wrist: a new approach. Tech Hand Up Extrem Surg 1998; 2(1):25–35. 7. Weinstein LP, Berger RA. Analgesic beneﬁt, functional outcome, and patient satisfaction after partial wrist denervation. J Hand Surg [Am] 2002; 27(5):833–9. 8. Hwang M, Kang YK, Shin JY, Kim DH. Referred pain pattern of the abductor pollicis longus muscle. Am J Phys Med Rehabil 2005; 84(8):593–7.

42 Treatment of Pyogenic Flexor Tenosynovitis Using Closed Catheter Irrigation Karol A. Gutowski

Division of Plastic and Reconstructive Surgery, University of Wisconsin, Madison, Wisconsin, U.S.A.

& INTRODUCTION Pyogenic (or suppurative) ﬂexor tenosynovitis (Fig. 1) is an infection of the ﬂexor tendon sheath that is usually caused by a penetrating injury and less commonly by hematogenous spread. Lacerations, punctures, and bites account for most cases. Four classic ﬁndings have been described by Kanavel (1): (i) Flexed posture of the ﬁnger, (ii) Fusiform swelling of the digit (“sausage digit”), (iii) Exquisite tenderness along (and limited to) the course of the sheath, and (iv) Excruciating pain with passive extension of the ﬁnger (late ﬁnding). Staphylococcus and Streptococcus species are common pathogens; however, Gram negative rods, anaerobes, and mixed cultures may also present. Gonorrhea (2) and Candida albicans (3) infection have been reported as causes of ﬂexor tenosynovitis in immunocompromised patients. Purulence within the sheath creates adhesions and disrupts tendon gliding, resulting in limitation of tendon function and loss of hand motion. Consequences of un- or under-treated tendon sheath infection are tendon necrosis, disruption of the tendon sheath, and digital contracture. Early presentation of pyogenic tenosynovitis (within 48 hour of onset) can be treated with a combination of intravenous (IV) antibiotics, splinting for immobilization, and extremity elevation. If there is no clinical improvement after 24 hour, or if presentation is beyond 48 hour, and in cases where a deﬁned abscess or infected ﬂuid collection is present, surgical drainage is required to remove purulence from the closed space of the ﬂexor sheath. The established surgical treatment for pyogenic ﬂexor tenosynovitis involves drainage of pus, followed by sheath irrigation. Traditionally, volar Bruner (Fig. 2) or lateral midaxial (see Fig. 6 in chap. 1) incision along the entire length of the ﬁnger allow access to the ﬂexor sheath for open drainage (OD) and irrigation. In 1943, Dickson-Wright (4) conceived an alternative method for sheath drainage and irrigation by using a ureteric catheter. This technique thereby preserved peripheral structures and minimized loss of tendon function. Carter et al. (5) in 1966 were the ﬁrst to recommend catheter irrigation of the sheath through a small incision proximal to the ﬁrst annular (A1) pulley with a distal counter incision for egress of ﬂuid. Subsequently, others reported successful treatment of suppurative tenosynovitis by minimally invasive closed catheter irrigation (CCI) techniques (6–10), where the entire ﬂexor tendon sheath was not fully exposed. A retrospective comparison of the OD versus CCI methods did not demonstrate a difference in early postoperative outcomes (11). The CCI treatment group appeared to have less postoperative complication than the open irrigation treatment group; however, this difference was not statistically signiﬁcant. Nonetheless, there is support for the minimally invasive CCI

technique being the preferred treatment for pyogenic ﬂexor tenosynovitis. Advantages include thorough mechanical tendon sheath irrigation, less need to perform a repeat open irrigation and debridement, rapid return to function (12), and smaller wounds with less scarring.

& INDICATIONS The indication for CCI is based on history and physical examination consistent with acute stage I suppurative ﬂexor tenosynovitis (Table 1) (13). Contraindications for CCI include stage III infections, chronic infections, or infections caused by atypical mycobacteria. In these cases of extensive infections, an open approach is more appropriate in order to assure that all pockets of purulence are adequately drained. In general, however, extensive tissue necrosis results in amputation.

& CONSIDERATIONS FOR PREOPERATIVE PLANNING Preoperative planning starts with making the correct diagnosis of pyogenic ﬂexor tenosynovitis based on history and physical examination. Distinguishing a more superﬁcial subcutaneous abscess from a tendon sheath infection can be difﬁcult; however, a subcutaneous abscess should not have tenderness over the entire digit, and passive movement of the uninvolved segments should be painless. The anatomy of the ﬂexor tendon sheaths presents another point for consideration. The sheaths of the index, middle, and ring ﬁngers extend from the distal phalanges to the distal palmar crease, ending at the A1 pulley. These sheaths generally do not communicate. The small ﬁnger and thumb sheaths are continuous with the ulnar and radial bursae in the wrist, respectively. Because the radial and ulnar bursae are frequently contiguous, infections in either the small ﬁnger or thumb are at risk of spreading to the other digit, causing a “horseshoe abscess.” when such an infection does occur, the radial and ulnar bursae, along with both tendon sheaths require irrigation. Another consideration is whether to start a trial of medical management with IV antibiotics. Empiric treatment with a synthetic penicillin combined with a beta-lactamase inhibitor or with a ﬁrst generation cephalosporin and penicillin is appropriate (14), if initiated within 48 hour of the onset of symptoms. Standard anteroposterior and lateral radiographs to rule out bony involvement or foreign body should be obtained as part of the preoperative workup. Complete blood count, erythrocyte sedimentation rate, and c-reactive protein are usually not necessary.

322 & Gutowski (A)

(B)

FIGURE 1 (A and B) A clinical photograph of a patient with pyogenic ﬂexor tenosynovitis of the right middle ﬁnger. Source: Courtesy of Virak Tan, MD.

& SURGICAL TECHNIQUE A standard operating room (OR) setup (with the patient supine and the affected arm abducted over a hand table) is used. A basic set of instruments consisting of scalpels, skin hooks, ragnel retractors, tentomy scissors, small hemostats, freer elevator, and short IV extension tubing should be opened on the sterile ﬁeld. The author’s preferred technique for pyogenic tenosynovitis is a modiﬁcation of Neviaser’s CCI method (6,12): 1.

Make a 1 to 2 cm skin incision in the palm in the region of the A1 pulley. Bluntly dissect down to the ﬂexor tendon sheath and open it proximal to the A1 pulley of affected ﬁnger. 2. Send swab of sheath ﬂuid/pus for Gram stain and culture. 3. Approximately 1 cm proximal to the skin incision, percutaneously insert an 18G angiocatheter 2.5 to 3.0 cm distally into the sheath. After securing the catheter to the skin with suture(s), attach the short IV extension tubing to the hub of the angiocatheter. 4. Make a distal midaxial counter incision (on the radial side for the small ﬁnger and thumb, and the ulnar side for the index, middle, and ring ﬁngers), staying dorsal to

5.

6. 7.

8. 9.

neurovascular structures. Vent the sheath distal to the A4 pulley (Fig. 3). Connect a syringe to the IV tubing and irrigate gently with 50 cc of normal saline through the catheter. Continue the irrigation until the output is clear. Failure to clear purulence indicates a need for OD. Place small drain (1/4 in. Penrose) in distal counter incision to keep it open and secure the drain with a suture. Close the proximal incision at the A1 pulley (Fig. 4). Place a short arm splint with the wrist and hand in the safe position at no more than 708 of metacarpalphalangeal joint ﬂexion, to avoid kinking of the catheter and/or IV tubing. Disconnect the syringe and cap the IV tubing outside of the dressing and splint. Make the tubing accessible for irrigation. Irrigate with 50 cc of normal saline after splint applied but prior to leaving OR to assure the irrigation system is functioning.

If the thumb is involved, place the catheter in the ﬂexor pollicis longus sheath as it leaves the carpal tunnel. If the ulnar bursa is involved, place a second catheter in the small

Treatment of Pyogenic Flexor Tenosynovitis Using Closed Catheter Irrigation & 323

In the past, authors have also investigated instillation of antibiotic solution through the catheter without routine irrigation (16), single antibiotic dose instillation with distal counter incision for drainage (16), and through-and-through intermittent antibiotic irrigation (5,17). However, it is doubtful if these variations are superior to CCI as described by Neviaser (6,12). Antibiotic instillation only, especially in low volumes, does not allow for adequate irrigation of infected and purulent matter. Single instillations with drainage do not allow for the dilutional effect of frequent irrigations to decrease bacterial counts. Also, instillation of a single antibiotic may not cover all possible pathogens, especially with the emergence of antibiotic resistance and frequent ﬁndings polymicrobial infections. Finally, instillation or irrigation of any non-physiologic solution such as concentrated antibiotics (5,10,16,17) or peroxide (5) may cause damage to otherwise healthy and viable cells, including leukocytes, synovium, tenocytes, and ﬂexor tendon sheath endothelium. For these reasons, such irrigation protocols should be avoided. Closed continuous high volume irrigation after wide exploration for drainage is a variation in the CCI technique that has been reported as a treatment for various hand infections (7). However, there is no evidence that volumes of 1500 to 2000 mL per day for one week are necessary. FIGURE 2 Skin marking for a Bruner incision over the entire length of the ﬂexor tendon sheath. Source: Courtesy of Virak Tan, MD.

ﬁnger tendon sheath in a proximal direction with a counter incision and Penrose drain at the wrist. Postoperatively, bedside irrigation should be performed manually with 10 to 60 cc of normal saline over two minutes, every two to six hours and continued for 48 hour. Extremity elevation and splinting in the safe or intrinsic-plus position is maintained in the early postoperative period. Appropriate empiric IV antibiotics should be utilized and changed if deemed necessary by intraoperative cultures. The catheter and penrose drain are removed at two to four days, depending on the patient’s symptoms There should be reduction in pain, swelling, and erythema. Hand therapy beginning with range of motion exercises is started after the catheter is discontinued. Comparable oral antibiotic is continued on an outpatient basis to complete a 10 to 14 day course.

& Variations in CCI Technique Many variations in the CCI techniques have been developed through the years, but the basic concepts of: (i) Inﬂow/outﬂow, and (ii) Limited exposure of the tendon sheath, remain the same. Different catheters for inﬂow, including 16G angiocatheter, infant feeding tube (usually 4- or 5-Fr G) and uteretic catheter have been utilized. The used of a second catheter for outﬂow to minimize leakage of the irrigation ﬂuid from the wound has been described (15). Another variation to help with drainage is to place the inﬂow catheter in the distal wound and have the irrigation ﬂuid ﬂow in a proximal direction to allow gravity assisted ﬂow in the elevated extremity. These minor alterations in technique have proven successful and do not change the outcome of the procedure. TABLE 1 Michon Classiﬁcation of Tendon Sheath Infection Stage I Stage II Stage III

Increased ﬂuid in sheath, mainly a serous exudate Purulent ﬂuid, granulomatous synovium Necrosis of the tendon, pulleys, or tendon sheath

& COMPLICATIONS AND THEIR MANAGEMENT Potential problems with CCI include dislodging or kinking of the catheter which prevents ﬂushing of the sheath. Proper suturing of the catheter to the skin, splitting and immobilization of the extremity, and securing the catheter tubing to the splint helps prevent dislodging. Percutaneously inserting the catheter proximal to the incision at less than or equal to 308 angle to the plane of the palm helps prevent kinking of the catheter. Additionally, directly observing the catheter entering the sheath and testing the irrigation system prior to skin closure and after splinting, assure that the ﬂow is unobstructed. It is important to minimize high pressure or large volume irrigation, especially at the bedside, to avoid a “mini-compartment syndrome” of the digit. This complication is characterized by digital pallor which usually subsides within 15 to 30 minutes without any long-term sequella. This phenomenon can be avoided by adhering to the technique as described. If the signs and symptoms of tenosynovitis fail to improve or worsen in the postoperative period, a second surgery with repeat irrigation and debridement should be done by open technique.

& OUTCOMES The outcome of pyogenic ﬂexor tenosynovitis is related to the severity and duration of the infection, and the bacteriology (18). Several authors have reported on the outcome of treatment with CCI methods. In 1978, Neviaser (6) reported on 20 patients treated by through-and-through saline irrigation using an indwelling catheter and small Penrose drain. The treatment lasted for 48 hour and all patients were discharged from the hospital within four days. Eighteen patients had regained complete active and passive motion by one week after operation. One patient had a slight residual ﬂexor tendon adherence and one regained motion after a second operation. The author concluded that this technique provided rapid and complete return of function with minimal patient inconvenience.

324 & Gutowski

Angiocatheter Flexor tendon sheath A1 MC

P1

A2

A3 P2

A4

P3

Penrose drain

In 1999, Harris and Nanchahal (15) published their experience with CCI for the treatment of hand infections. There were six cases of pyogenic ﬂexor tenosynovitis. The authors’ technique consisted of two fenestrated tubes within the ﬂexor sheath; one was for instillation of irrigation and the other for drainage. There were four excellent (normal total active motionTAM), one good (R75% of contralateral TAM), and one fair (R50% of contralateral TAM) outcome. This author and colleagues (11) retrospectively reviewed 47 cases of pyogenic ﬂexor tenosynovitis to determine whether a difference in outcomes existed between OD versus CCI. OD was used in 32 patients and CCI was used in 15 patients. Complications appeared to be more common in the OD group (NZ9) compared with the CCI group (NZ3), but this difference was not signiﬁcant. This study supported the use of CCI as the

FIGURE 3 Diagram of the ﬂexor tendon sheath and pulley system of a ﬁnger. One centimeter proximal to the skin incision over the A1 pulley, an 18G angiocatheter is percutaneously inserted for 2.5 to 3.0 cm into the ﬂexor tendon sheath. A midaxial counter incision (on the radial side for the small ﬁnger and thumb, and the ulnar side for the index, middle, and ring ﬁngers) is made to vent the sheath distal to the A4 pulley with a Penrose drain. Abbreviations: MC, metacarpal bone; P1, proximal phalanx; P2, middle phalanx; P3, distal phalanx. Source: Courtesy of Virak Tan, MD.

preferred treatment for pyogenic ﬂexor tenosynovitis because it provides thorough mechanical tendon sheath irrigation and causes smaller wounds with less scarring.

& SUMMARY Optimal management of pyogenic ﬂexor tenosynovitis includes early diagnosis, elevation and splinting the affected wrist and hand in the safe position, appropriate antibiotics directed at the suspected pathogens, and frequent clinical re-examination. When the early stage of tenosynovitis has passed (duration of symptoms greater than 24 to 48 hour) or when medical treatment fails to show improvement, surgical drainage is indicated. Intermittent CCI of the ﬂexor tendon sheath through small incisions is as effective as OD of the sheath through long volar or lateral midaxial incisions where the entire sheath is exposed. The limited incisions of CCI minimize trauma to the soft tissue of the ﬁnger, decrease the risk of surgical complications, and allow for faster soft tissue healing. As such, CCI decreases the time from surgery to therapistdirected range of motion exercises which optimizes long-term function of the hand. In the future, there may be a role for minimally invasive CCI of pyogenic ﬂexor tenosynovitis in the OR, followed by outpatient antibiotic treatment which has the potential beneﬁt of limiting the socioeconomic burden associated with hospitalization (19).

& SUMMATION POINTS

Indications &

Acute stage I suppurative ﬂexor tenosynovitis

Contraindications & & &

Stage III infections Chronic infections Infections caused by atypical mycobacteria

Outcomes & &

Successful eradication of infection 90% regain full digital motion

Complications FIGURE 4 Clinical photograph of a closed catheter irrigation of pyogenic ﬂexor tenosynovitis.

& &

Dislodging or kinking of the catheter “Mini-compartment syndrome” of the digit

Treatment of Pyogenic Flexor Tenosynovitis Using Closed Catheter Irrigation & 325

& REFERENCES 1. Kanavel AB. Infections of the Hand. 7th ed. Philadelphia, PA: Lea & Febiger, 1943. 2. Krieger LE, Schnall SB, Holtom PD, Costigan W. Acute gonococcal ﬂexor tenosynovitis. Orthopedics 1997; 20:649–50. 3. Townsend DJ, Singer DI, Doyle JR. Candida tenosynovitis in an AIDS patient: a case report. J Hand Surg [Am] 1994; 19:293–4. 4. Dickson-Wright A. Tendon sheath infection. Proc R Soc Med 1943–1944; 37:504. 5. Carter SJ, Burman S, Mersheimer WL. Treatment of digital tenosynovitis by irrigation with peroxide and oxytetracycline. Ann Surg 1966; 163:645–50. 6. Neviaser RJ. Closed tendon sheath irrigation for pyogenic ﬂexor tenosynovitis. J Hand Surg 1978; 3:462–6. 7. Nemoto K, Yanagida M, Nemoto T. Closed continuous irrigation as a treatment for infection in the hand. J Hand Surg 1993; 18(B):783–9. 8. Gosain AK, Markison RE. Catheter irrigation for treatment of pyogenic closed space infections of the hand. Br J Plast Surg 1991; 44:270–3. 9. Schnall SB, Vu-Rose T, Holton PD, et al. Tissue pressures in pyogenic ﬂexor tenosynovitis of the ﬁnger. J Bone Joint Surg Br 1996; 78-B:793–5.

10. Besser MI. Digital ﬂexor tendon irrigation. Hand 1976; 8:72. 11. Gutowski KA, Ochoa O, Adams WP, Jr. Closed catheter irrigation is as effective as open drainage for treatment of pyogenic ﬂexor tenosynovitis. Ann Plastic Surg 2002; 49:350–4. 12. Neviaser RJ. Infections. In: Green DP, ed. Operative Hand Surgery, 3rd ed., Vol. 1. New York: Churchill Livingstone, 1993:1021–38. 13. Michon J. Phlegmon of the tendon sheaths. Ann Chir 1974; 28(4):277–80. 14. Moran GJ, Tala DA. Hand infections. Emerg Med Clin North Am 1993; 11:601–19. 15. Harris PA, Nanchahal J. Closed continuous irrigation in the treatment of hand infections. J Hand Surg [Br] 1999; 24(3):328–33. 16. Loudon JB, Miniero JD, Scott JC. Infections of the hand. J Bone Joint Surg 1948; 30B:409–29. 17. Pollen AG. Acute infections of the tendon sheaths. Hand 1974; 6:21–5. 18. Glass KD. Factors related to the resolution of treated hand infections. J Hand Surg 1982; 7:388–94. 19. Bauman JT, Millon SJ, Tanner SL. The outpatient treatment of pyogenic ﬂexor tenosynovitis. J Surg Orthop Adv 2005; 14(2):92–5.

43 Dupuytren’s Contracture Lawrence C. Hurst and Marie A. Badalamente

Department of Orthopedics, State University of New York, Stony Brook, New York, U.S.A.

& INTRODUCTION Dupuytren’s disease (DD) is a ﬁxed ﬂexion contracture deformity of the ﬁngers that can cause progressive loss of hand function. It was ﬁrst described by Felix Plater of Basel in 1614 (1). Henry Cline, from London, in 1777 was the ﬁrst to recognize the role of the palmar fascia. However, in these early times confusion still existed as to whether the ﬂexor tendons, their sheaths, or the palmar fascia were responsible for the ﬁnger contractures. Baron Guillaume Dupuytren, in France, in 1831 (2) correctly described the pathologic anatomy and performed surgery to correct the condition. Thus, the disorder now bears his name. It was not until the 1940s and 1950s that investigators recognized the ﬁbrosis of the palmar fascia and changes in cell density as time progressed (3,4). Luck divided the disease into stages based on microscopic cell density. The classiﬁcation is still in use today. The ﬁrst two stages, the proliferative and involutional, are characterized by increasing cell densities with collagen ﬁbrosis. By the last residual stage, cell density markedly decreases with severe collagen ﬁbrosis establishing the well known cords of the disease. By the early 1970s, Gabbiani and Majno’s work (5) ﬁrmly established that the pathognomic cell in the palmar fascia was a type he termed as myoﬁbroblast. This cell had characteristics of a ﬁbroblast and smooth muscle cell, since it contained a dense array of intracellular contractile ﬁlaments. The question remained for a long period was how a supposedly contractile cell type might transmit contractile forces to the extracellular collagen, thus producing the contractures. In a landmark study, Tomasek and Haaksma (6) established that the intracellular generation of contractile forces by myoﬁbroblasts was transmitted to the surrounding collagen through a structure they termed the ﬁbronexus. This is a transmembrane adhesion complex from intracellular actin ﬁlaments via ﬁbronectin to surrounding collagen ﬁbrils. Since then, much literature has reported on the nature of the collagenous and extracellular matrix (7–11), as well as substances which may inﬂuence the contractility of myoﬁbroblasts. The rationale was that if the cell biology of the disease could be speciﬁcally detailed, then inhibitors of myoﬁbroblast proliferation and/or the contractile properties could be developed. Among the cell substances studied were: & & & & & & & & & &

Prostaglandins E2 and F2a (12) Platelet derived growth factor (13) Lysophosphatic acid (14) Interferon gamma 2b (15,16) Androgen receptors (17) Beta-catenin oncogene (18) Nerve growth factor (19) Interleukin 1a (20) Alpha 5-beta 1 integrin (21) Z9f transcription factor (22)

Among the substances studied for their ability to induce myoﬁbroblast proliferation were transforming growth factor b1 and b2 (23–25) and ﬁbroblast growth factor (23). It is still unknown what cellular signals induce apoptosis (cell death) of myoﬁbroblasts in the last, residual stage of the disease. The treatment goal for DD is restoration of hand function by correcting the ﬂexion contracture. At the present time, there is no perfect operation or standard accepted approach to achieve this goal. Numerous surgical techniques are employed, ranging from simple fasciotomy (division of the contracted cords) to limited or radical fasciectomy. In addition, there are just as many different options for management of the skin. The rate of complications from surgical release of Dupuytren’s contracture of the hand is relatively high and can be categorized into intraoperative, early and late postoperative. Intraoperative complications include nerve and arterial injuries. Early postoperative complications (before wound healing) include hematoma, wound infection, complex regional pain syndrome, and skin slough. Late postoperative complications include scar contraction and recurrence. In an effort to minimize complications from Dupuytren’s surgeries, many non- and minimally invasive techniques have been investigated. In recent years many nonoperative therapies targeting myoﬁbroblasts have been studied. Hyperbaric oxygen for the treatment of early stage DD has been described in a case report on one patient (26). Triamcinolone injections of early disease nodules have been reported to have merit (27). Similarly, depomedrone, in vitro, was shown to downregulate expression of transforming growth factor b (28). Also, in vitro, tamoxifen has been shown to decrease the ability of myoﬁbroblasts to contract (29). The immunosuppressant 5-ﬂuorouracil was shown in vitro to inhibit myoﬁbroblast proliferation and differentiation (30). However, when used in patients as a topical treatment, there was no beneﬁcial clinical effect (31,32). French rheumatologists have recently popularized fasciotomy using a percutaneous needle technique. In this technique, the bevel of the needle is used as a cutting blade. The surgical approach of this percutaneous technique is blind, which is an obvious disadvantage. Foucher et al. (33) reviewed the charts of 211 patients in which 261 hands and 311 ﬁngers were treated by percutaneous needle aponeurotomy. The ﬁrst 100 patients were evaluated with a mean follow-up of 3.2 years. Only one digital nerve was found to be injured. However, the recurrence rate was unacceptably high at 59%. These 59 patients needed further hand surgery. The use of the continuous elongation technique or technicadi extrensiona continua (TEC) device was developed ﬁrst in the 1960s and then in the early 1990s by Messina et al. (34). This device provides continuous elongation of the Dupuytren’s contracture before doing an open fasciectomy. The Messina TEC device provided skeletal traction of the

328 & Hurst and Badalamente

pathologic cord of DD (35,36). The traction (distraction) was applied at a rate of 2 mm per day over an average period of two weeks. Others have applied the skeletal traction using the TEC device for as long as four weeks. Signiﬁcant reduction of the contracture is usually achieved, but stretching out of the ﬁnger must be quickly followed by limited fasciectomy or the contracture will recur rapidly. The complications following TEC can be signiﬁcant, such as rapid recurrence, infection, stiffness in extension, pain, and reﬂex sympathetic dystrophy. Another surgical method which was purported to be less invasive is segmental aponeurectomy. This procedure was ﬁrst proposed by Vilain in 1982 in a presentation at a conference of the Belgian Hand Group. Moermans (37,38) performed prospective studies of this technique. He postulated that if a permanent discontinuity could be created without wide dissection of the diseased fascia, then the contracture might disappear. Small pieces of diseased fascia about 1 cm long were excised, beginning from proximal to distal through C-shaped incisions. While intraoperative correction of the joint contractures was achieved, the mean recurrence rate at 2.6 years in Moerman’s series (37) of 213 patients was 35.7%. Andrew and Kay (39) also investigated the use of segmental aponeurectomy in 40 hands. They reported good results in correction of metacarpophalangeal (MP) joint contractures at 12 months follow-up, but only half the patients with proximal interphalangeal (PIP) joint contractures had a good result. In this study, the mean residual PIP joint contracture was 228 at both 1 and 12 months postoperatively. Segmental aponeurectomy is not a favored technique in use today. In the mid 1990s, the authors of this chapter began to develop another nonoperative therapy using a well-known enzyme, collagenase, for the purpose of lysing the Dupuytren’s cord and inducing cord rupture. The concept of enzymatic fasciotomy had been investigated before by Hueston (40), who combined both trypsin and hyaluronidase intraoperatively. This method provided clinical beneﬁt initially, but reportedly had a high recurrence rate (41). We developed puriﬁed collagenase (Auxillian Inc.) as a stand-alone injection therapy and not as an intraoperative adjunct (42,43). The results of Phase 2 clinical trials indicate that collagenase injection into Dupuytren’s cords has merit as a minimally invasive treatment of this disorder (44,45). Our experience with this technique is presented below.

& CONSIDERATIONS FOR PRE-PROCEDURE PLANNING Pre-procedure examination should conﬁrm that DD is the primary cause of the ﬁnger ﬂexion deformity. Patients with secondary PIP capsular/volar plate contracture may require operative procedure at the PIP to restore extension. Imaging and other studies are not usually needed.

& TECHNIQUE The procedure is done in the ofﬁce setting. The skin over the contracted cord is prepped and 10,000 units (0.58 mg AA4500) collagenase (in a sodium/calcium diluent) is delivered into the cord at the point of maximum bowstringing of the ﬁnger contracture using an insulin syringe and a 27-gauge needle (Fig. 1). A volume of 0.25 mL for the MCP joints and 0.20 mL for the PIP joints is used. In the case of patients with MCP contractures of adjacent ﬁngers, with pretendinous and natatory Y-shaped cords (Fig. 2), placement of the injection should be at the point of the Y in attempt to affect both digits. Patients are seen the following day for passive manipulation/extension of the affected digit(s) to manually rupture the cords. Local anesthetic can be used when attempting cord rupture but is not required. If cord rupture does not occur with the manipulation, the patients are instructed to apply extension forces at home under their own control. Home extension exercises are encouraged. Patients are also ﬁtted with a night extension splint that is worn for four months. Daily vitamin E massage for four months is recommended to keep the treatment area soft and pliable. For multiple joints or digits involvement that did not response adequately to the ﬁrst injection, the collagenase injection technique is staged at four to six weeks later. The rationale for allowing time between injections was to allow potential adverse events to resolve. A total of three injections can be done directed at the cord of one ﬁnger joint contracture. The maximum number of injections per patient, involving several ﬁngers and/or bilateral disease is still under investigation in clinical trials.

& Illustrative Case Example A 70-year-old right hand dominant male presented with bilateral DD of the hands. His contractures involved the right

& INDICATIONS At the present time, collagenase injection into Dupuytren’s cords can only be done as part of the U.S. Food and Drug Administration (FDA) investigational new drug. Indications are evolving as more experience is gained from the clinical trials. The authors have employed this technique on patients with the clinical diagnosis of DD who have 208 or greater ﬂexion contractures of the metacarpophalangeal (MCP) and/or PIP joints. Patients with recurrence of contractures after a surgical release are also candidates for the injection. These criteria are similar to those for open release, where it is generally accepted that progressive MP contractures of 308 or greater or any progressive PIP contracture of greater than 158 is an indication for surgery. There are relatively few contraindications for this procedure. Patients who are unable to tolerate a needle puncture in the palm and those who may be allergic to the collagenase should not undergo the procedure.

FIGURE 1 The technique of collagenase injection involves direct cord injection, as shown in this photo of an metacarpophalangeal joint.

Dupuytren’s Contracture & 329

FIGURE 2 Cord injection. When a patient has a Y-shaped cord, created by a combination of the central and natatory cords, the point of the Y should be injected with collagenase. Injection of this site may result in simultaneous correction of adjacent ﬁnger metacarpophalangeal joint contractures.

little MP and PIP joints (208 and 508, respectively) and the right ring MP and PIP joints (508 and 358, respectively). Left hand disease consisted of 308 long and ring ﬁnger contractures. Figures 3 and 4 show this patient’s pretreatment contractures. The ﬁrst collagenase injection was directed at the right ring MP/PIP contractures. The MP joint is always injected ﬁrst as this is the point of maximal bowstringing. It is not to be expected that both MP and PIP joint contractures will resolve with one injection. This is more likely if there is a central cord. At day one, the cord ruptured and the ﬁnger was fully straightened. As the right little MP contracture had a natatory cord, this contracture also fully corrected to 08 by one week post injection. The right little PIP joint contracture was injected with collagenase six weeks later. By one month after collagenase injection, the PIP joint contracture was fully corrected to 08. Attention was then turned to the left hand contractures. At ﬁve weeks post the second injection, the left ring MP contracture was injected and the cord ruptured the next day with full correction to 08. Five weeks later, this patient received a ﬁnal collagenase injection for the remaining left hand, long ﬁnger MP contracture. This contracture also responded with cord rupture and full correction to 08 at one day after the injection.

FIGURE 3 A 70-year-old male patient with right hand ring and little ﬁnger metacarpophalangeal and proximal interphalangeal joint contractures.

FIGURE 4 Same patient as in Figure 3, left hand long and ring ﬁnger metacarpophalangeal joint contractures.

This patient remains free of recurrence was no loss of ﬂexion or grip strength at the last follow-up visit, 12 months post the last injection (Figs. 5 and 6).

& COMPLICATIONS AND THEIR MANAGEMENT Side effects of the collagenase injection include ﬁnger/hand edema, tenderness and ecchymosis of the injected ﬁnger. In patients whose PIP joint cords were injected, some experienced tenderness of the lymph nodes at the elbow and/or axilla. These adverse events resolved within 7 to 14 days of injection (44,45). Skin tears can occur during manipulation and cord rupture in patients with long-standing, severe contractures. The tears can be treated with local wound care and will heal within several weeks.

& OUTCOMES The outcome of collagenase correction of Dupuytren’s contracture is based on FDA regulated Phase 2 clinical trials (45). The ﬁrst part of the study was a placebo-controlled, random, doubleblind investigation. Thirty-six patients with MP contractures and 13 patients with PIP contractures only were enrolled. Eighteen MP patients were assigned to drug treatment and 18 to placebo.

FIGURE 5 Same patient as in Figures 3 and 4, after successful collagenase injection treatments.

330 & Hurst and Badalamente

collagenase injection(s), in this study was 10% for MP joints and 20% for PIP joints at ﬁve years.

& SUMMARY

FIGURE 6 Same patient as in Figures 3– 5 showing normal ﬂexion after collagenase treatments.

Fourteen of the 18 MP patients (77%) fully corrected after one 0.58 mg unit collagenase injection. The remaining four patients fully corrected to 08 extension after a second open label, 0.58 mg unit collagenase injection. Two placebo patients with MP contracture also fully corrected, but it was subsequently determined that there was an error by the pharmacist. In fact, these two placebo patients had been given 0.58 mg collagenase. Five of seven patients (71%) with PIP joint contractures who were in the 0.58 mg collagenase group corrected fully after one injection and one patient corrected fully after a second collagenase injection. Six of six open label placebo patients did not respond. Upon re-treatment of placebo patients with 0.58 mg collagenase, four of the six patients (66%) corrected to normal extension. In this study, a total of six patients were injected who had prior surgical fasciectomy with recurrent contractures. All had PIP joint (only) contractures. Three PIP joints were corrected to normal extension and three were not. The recurrence rate, after collagenase injection(s), in this study was 8% for MP joints and 25% for PIP joints, at ﬁve years. Because the results of the 0.58 mg versus placebo study indicated that collagenase injections had substantial merit, after FDA consultation, it was decided that a second random, doubleblind, placebo-controlled, dose response study should be performed. This was to determine if 0.58 mg collagenase was indeed the minimum, safe and effective dose. This trial was multicenter with two test sites with 80 patients entered the study (45). Fifty-ﬁve patients had MP joint contractures and 25 patients had PIP joint contractures. Patients were randomized to placebo cord injections, 1⁄4 dose, 1⁄2 dose, or 0.58 mg collagenase. The 0.58 mg treatment group clearly showed the best clinical beneﬁt in inducing cord ruptures (Figs. 3 and 4). By one month after 0.58 mg collagenase injection, 14 of the 18 patients (77%) with MP contractures achieved full extension. The remaining four patients with MP contractures who did not respond to the ﬁrst injection had a subsequent 0.58 mg injection. All four MP joints corrected to normal extension by one month. PIP joint contractures also responded in a similar manner. Five of seven patients (71%) with PIP joint contractures who were treated with the 0.58 mg dose corrected to full extension after one month. Statistical testing, using Fisher’s exact test, indicated that the “clinical success rate” for return to normal extension at the 0.58 mg dose was 90% for MP joint contractures and 70% for PIP joint contractures. The authors speculate that the lower success rate in PIP joints may be due to resistant abductor digiti minimi cords and that division of the volar plate check veins is not possible with collagenase injections. The recurrence rate, after

Collagenase injection into the Dupuytren’s cord is a safe and effective minimally invasive method to treat MCP and/or PIP ﬂexion contractures. Patients regain ﬁnger extension and thus have improved range of ﬁnger motion. Flexion and grip strength were not adversely affected by collagenase injection. A random, placebo-controlled, dose-response study in clinical trial IIB showed that 0.58 mg of collagenase is the minimum safe and effective dose for cord injection. Adverse effects of collagenase injection are limited to local tissue reaction consisting of pain, edema, ecchymosis, and an occasional elbow and/or axillary lymphadenopathy. These side effects resolve in the short term and have no long-term sequela. To date, clinical trials show relatively low recurrence rates. We expect that recurrences of disease can be treated with repeat collagenase injections. Those that fail the maximum number of injections can still be treated with an open surgical procedure. At the time of this writing, collagenase injection for DD of the hand is not yet commercially available. Multi-center, Phase 3 clinical trials are ongoing to provide data to the FDA for approval. In the future, this minimally-invasive technique of cord rupture may prove revolutionary as a stand-alone treatment of DD.

& SUMMATION POINTS

Indications & & &

Can only be used as FDA investigational new drug Similar to those for open release Recurrence of Dupuytren’s contractures after surgical release

Contraindications &

Allergy to collagenase

Outcomes & & &

90% of MP joint contractures regain full extension 70% of PIP joint contractures regain full extension Recurrence rate of 10% for MP joints and 20% for PIP joints at ﬁve years

Complications/Adverse Effects & & & &

Finger/hand edema Tenderness and ecchymosis of the injected ﬁnger Transient lymphadenopathy at elbow and/or axilla Skin tears

& REFERENCES 1. 2.

Plater F. ObservationumLiber, cited by Durel L. 1614; 1:140. Dupuytren G. De la retraction des doigts par suite d’une affection de l’ aponeurose palmaire par mm. les docteurs Paillard et Marx. Journal Universel et Hebdomadaire de Medecine et de Chirurgie Pratiques et des Institutions Medicales, Paris, 1831. Reprinted in Medical Classics 1939–1940, Vol. 4. Royal Society of Medicine, London. 3. Meyerding H, Black J, Broders A. The etiology and pathology of Dupuytren’s contracture. Surg Gynecol Obstetr 1941; 72:582–90.

Dupuytren’s Contracture & 331 4. Luck JV. Dupuytren’s contracture—a new concept of the pathogenesis correlated with surgical management. J Bone Joint Surg 1959; 41A:635–64. 5. Gabbiani G, Majno G. Dupuytren’s contracture: ﬁbroblast contraction? An ultrastructural study Am J Pathol 1972; 66:131–46. 6. Tomasek JJ, Haaksma CJ. Fibronectin ﬁlaments and actin microﬁlaments are organized into a ﬁbronexus in Dupuytren’s diseased tissue. Anat Rec 1991; 230:175–82. 7. Bazin S, LeLous M, Duance VC. Biochemistry and histology of the connective tissue of Dupuytren’s disease lesions. Eur J Clin Invest 1980; 10:9–16. 8. Brickley-Parsons D, Glimcher MJ, Smith RJ, et al. Biochemical changes in the collagen of the palmar fascia in patients with Dupuytren’s disease. J Bone Joint Surg 1981; 63A:787–97. 9. Chiu HF, McFarlane RM. Pathogenesis of Dupuytren’s contracture: a correlative clinical—pathological study. J Hand Surg 1978; 3:1–10. 10. Gelberman RH, Amiel D, Rudolph RM, et al. Dupuytren’s contracture. An electron microscopic, biochemical, and clinical correlative study. J Bone Joint Surg 1980; 62A:425–32. 11. Shum DT, McFarlane R. Histogenesis of Dupuytren’s disease: an immunohistochemical study of 30 cases. J Hand Surg 1988; 13A:61–7. 12. Badalamente MA, Hurst LC, Sampson SP. Prostaglandins inﬂuence myoﬁbroblast contractility in Dupuytren’s disease. J Hand Surg 1988; 13A:867–71. 13. Badalamente MA, Hurst LC, Sampson SP. Platelet derived growth factor in Dupuytren’s disease. J Hand Surg 1992; 17A:317–23. 14. Rayan GM, Parizi M, Tomasek JJ. Pharmacologic regulation of Dupuytren’s ﬁbroblast contraction in vitro. J Hand Surg 1996; 21B:1065–70. 15. Pittet B, Rubbia-Brandt L, Desmouliere A, et al. Effect of gammainterferon on the clinical and biologic evolution of hypertrophic scars and Dupuytren’s disease: an open pilot study. Plast Reconstr Surg 1994; 93:1224–35. 16. Sanders JC, Dodd C, Ghahara A, Scott PG, Tredget EE. The effect of interferon a2b on an in vitro model of Dupuytren’s contracture. J Hand Surg 1999; 24A:578–85. 17. Pagnotta A, Specchia N, Greco F. Androgen receptors in Dupuytren’s contracture. J Orthop Res 2002; 20(1):163–8. 18. Varallo V, Gan BS, Seney S, et al. Beta–catenin expression in Dupuytren’s disease: potential role for cell-matrix interactions in modulating beta-catenin levels in vivo and in vitro. Oncogene 2003; 22(24):3680–4. 19. Lubahn J, Konieczko E, Cooney T. Immunohistochemical detection of NGF in Dupuytren’s disease palmar fascia. Trans 50th Annual ORS, 1213, 2004. 20. Baird KS, Crossan JF, Ralston SH. Abnormal growth factor and cytokine expression in Dupuytren’s contracture. J Clin Pathol 1993; 46:425–8. 21. Magro G, Lanzafame S, Micoli G. Co-ordinate expression of alpha 5 beta 1 integrin and ﬁbronectin in Dupuytren’s disease. Acta Histochem 1995; 97:229–33. 22. Bayat A, Watson JS, Stanley JK, Ferguson MWJ, Ollier WE. Genetic susceptibility to Dupuytren’s disease: association of Zf9 transcription factor gene. Plast Reconstr Surg 2003; 111(7):2133–9. 23. Alioto RJ, Rosier RN, Burton RI, et al. Comparative effects of growth factors on ﬁbroblasts of Dupuytren’s tissue and normal plantar fascia. J Hand Surg 1994; 19A:442–52. 24. Badalamente MA, Sampson SP, Hurst LC, Dowd A, Miyasaka K. The role of transforming growth factor beta in Dupuytren’s disease. J Hand Surg 1996; 21A:210–5.

25. Kuhn MA, Payne WG, Kierney PC, et al. Cytokine manipulation of explanted Dupuytren’s affected human palmar fascia. Int J Surg Investig 2001; 2(6):443–56. 26. Yildiz S, Karacaoglu E, Pehliuan O. Hyperbaric oxygen for the treatment of early phase Dupuytren’s disease. Microsurgery 2004; 24(1):26–9. 27. Ketchum LD, Donahue TK. The injection of nodules of Dupuytren’s disease with Triamcinolone acetonide. J Hand Surg 2000; 25A:1157–62. 28. Meek RM, McLellan S, Reilly J, Crossan JF. The effect of steroids on Dupuytren’s disease: role of programmed cell death. J Hand Surg [Br] 2002; 27(3):270–3. 29. Kuhn MA, Wang X, Payne WG, Ko F, Robson MC. Tamoxifen decreases ﬁbroblast function and down regulates TGF (beta 2) in Dupuytren’s affected palmar fascia. J Surg Res 2002; 103(2):146–52. 30. Bulstrode NW, Mudera V, McGrouther DA, Grobbelaar AO, Cambrey AD. 5-ﬂuorouracil selectively inhibits collagen synthesis [miscellaneous article]. Plast Reconstr Surg 2005; 116(1):209–21. 31. Jemec B, Linge C, Grobbelaar AO, Smith PJ, Sanders R, McGrouther DA. The effect of 5-ﬂuorouracil on Dupuytren ﬁbroblast proliferation and differentiation. Chir Main 2000; 19(1):15–22. 32. Bulstrode NW, Bisson M, Jemec B, Pratt AL, McGrouther DA, Grobbelaar AO. A prospective randomized clinical trial of the intra-operative use of 5-ﬂuorouracil on the outcome of Dupuytren’s disease. J Hand Surg [Br] 2004; 29(1):18–21. 33. Foucher G, Medina J, Navarro R. Percutaneous needle aponeurotomy: complications and results. J Hand Surg [Br] 2003; 28(5):427–31. 34. Messina A, Jessiwa J. The continuous elongation treatment by the TEC device for severe Dupuytren’s contracture of the ﬁngers. Plast Reconstr Surg 1993; 92:84–90. 35. Citron N, Messina J. The use of skeletal traction in the treatment of severe primary Dupuytren’s disease. J Bone Joint Surg Br 1998; 80:126–9. 36. Hodgkinson P. The use of skeletal traction to correct the ﬂexed PIP joint in Dupuytren’s disease. J Hand Surg [Br] 1994; 19:534–7. 37. Moermans JP. Segmental aponeurectomy in Dupuytren’s disease. J Hand Surg 1991; 16B:243–54. 38. Moermans JP. Long term results after segmental aponeurectomy for Dupuytren’s disease. J Hand Surg 1996; 21B:797–800. 39. Andrew JG, Kay NRM. Segmental aponeurectomy for Dupuytren’s disease. J Hand Surg 1991; 16B:255–7. 40. Hueston J. Enzyymatic fasciotomy. Hand 1971; 3:38–40. 41. McCarthy D. The long-term results of enzymatic fasciotomy. J Hand Surg 1992; 17B:356. 42. Starkweather K, Lattuga S, Hurst LC, et al. Collagenase in the treatment of Dupuytren’s disease: an in vitro study. J Hand Surg 1996; 21A:490–5. 43. Badalamente MA, Hurst LC. Enzyme injection as a non-operative treatment for Dupuytren’s disease. Drug Deliv 1996; 3:35–40. 44. Badalamente MA, Hurst LC. Enzyme injection as a nonsurgical treatment of Dupuytren’s disease. J Hand Surg 2000; 25A:629–36. 45. Badalamente MA, Hurst LC, Hentz VR. Collagen as a clinical target: non-operative treatment of Dupuytren’s disease. J Hand Surg 2002; 27A:788–98.

Index

Acute fractures, non-bridging external ﬁxation of distal radius, 144–145 Acute left thumb UCL injury, surgical technique, 8 Acutrak cannulated screw (Acumed), 30 Adaptive proximal schapoid implant, placement, 126 Agee technique, carpal tunnel release, 305–309 Anatomic basis for hand and wrist MIS, 1–2 Anchor ﬂanged, 7 threaded, 8 toggle, 7 AO/ASIF classiﬁcation, distal radius fractures, 176, 183 AO/ASIF screw, 30 ARC traction tower, 225 Arthritis associated with scapholunate and scaphoid nonunion, minimally invasive treatment, 247–255 See also Distal scaphoid excision, Proximal row carpectomy, Radial styloidectomy. Arthrodesis external ﬁxation of metacarpals and phalanges, 74–75 interphalangeal joint, 23 Arthroscopic portals, 2 Arthroscopic treatment. See Basal joint arthritis arthroscopy; Chow technique; MP joint arthroscopy; Metacarpophalangeal joint fractures in the hand; Thumb CMC arthroscopy; Wrist and hand arthroscopy; Wrist ganglion cysts; Articular fracture–phalangeal base, 49–50, 52 ASIF compression plate, in distal radius fractures, 154 Augmented external ﬁxation, distal radius fractures, 133–142 aftercare, 139 complications, 139–140 goal of treatment, 133–135 indications, 133 Kirschner wires, 137 neutral alignment of wrist, 135, 136 operative technique, 135–138 outcomes, 140–142 physical exam, 133 preoperative planning, 133 surgical technique, 133–138 Awl, prefabricated, 1 Baby Bennett’s fracture, 38, 41 Balloon reduction and grafting, distal radius fractures, 175–179 complications, 177 indications, 175 outcomes, 178 postoperative management, 176–177 preoperative planning, 175 supplemental ﬁxation, 177 surgical technique, 175–176 Basal joint arthritis, arthroscopy/debridement, 263–266 1R portal, 264 1U portal, 264

[Basal joint arthritis, arthroscopy/debridement] anatomy, 264 complications, 265 equipment, 264 indications, 263 nonoperative treatment, 264 outcomes, 265 pathogenesis, 263 preoperative imaging, 263–264 preoperativeplanning, 263 surgical technique, 264 Basal joint arthritis, soft-tissue interposition, 267–273 1R portal, 271 1U portal, 271, 272 complications, 270 indications, 267 operative setup, 268 outcomes, 270–271 portal sites, 269 preoperative planning, 267 subcutaneous landmarks, 268 surgical technique, 267–270 Bennett’s fracture displaced, 47 mini screw ﬁxation, 46–47 outcome, 52 percutaneous pinning, 38–39 Bent wire ﬁxator, 66–68, 69, 70 Bioabsorable implants, 19–26 animal investigations, 20 evolution of, 19–20 experimental studies, 20–21 human investigation, 21 indications for use, 21 processing and sterilization, 19–20 properties of, 19 Bioabsorbable suture anchors, 5–6 Biocompression screw (Arthrex Corp.), 24 BioSymMetRic PIP ﬁxator (Biomet), 64–65 “perfect circle” technique, 66 Bone apatite, and calcium phosphate cement, 12 Bone bridge, use of, 5 Bone graft substitutes, 11–16 Bone lesions, bone graft substitutes and, 15–16 Bone tunnels, 5 Boxer’s fracture, 38 Button, use in sutures, 5 C-arm image intensiﬁer, 1, 2 Calcium phosphate cement, 11–12 hardening of, 12 injectable form, 12 ionic combinations, 11 Calcium sulfate cement, 12 Calcium sulfate resporption, 12

334 & Index

Cannulated screw placement, 32 guidelines for, 32 Cannulated screws, 29–35 Acutrak cannulated screw (Acumed), 30 alternatives to, 34 biomechanical evaluation of, 30–31 CAD design diagram, 30 clinical applications, 31–34 carpal injuries, 33 distal radius fractures, 34 intercarpal arthrodesis, 33 interphalangeal arthrodesis, 32 metacarpal joint arthrodesis, 32 scaphoid fracture ﬁxation, 32–33 conﬁguration of, 29 Herbert/Whiplle cannualted screw, 31 mechanical properties of, 29–30 Mini-Acutrak (Acumed), 31 Osteomed cannulated screw, 30–31 potential complications, 34–35 Universal compression screw (Howmedica), 30 Capsular electrodermal shrinkage techniques, 217–222. See also Arthroscopic treatment, wrist. Carpal injuries, cannulated screws and, 33 Carpal instability, 220. See also Arthroscopic treatment, wrist. Carpal instability, Geissler arthroscopic classiﬁcation, 224 Carpal tunnel release, anatomy of, 3 Carpal tunnel release, Agee technique, 305–309 indications, 305 outcomes, 308, 309 preoperative planning, 306 surgical technique, 306–307 Carpal tunnel release, with Indiana tome, 293–297 complications, 295 indications, 293 outcomes, 295–296 preoperative planning, 293 surgical technique, 293–295 Carpal tunnel release, with Security clipe, 299–303 complications, 301–302 indications, 299 outcomes, 303 preoperative planning, 299 rehabilitation, 301 surgical technique, 299–301 Cements, calcium phosphate, 11–12 Ceramic bone graft substitutes distal radius fracture, 12 indications, 12–13 overview of, 11 physical properties of, 11 surgical techniques, 13 Chow technique, 281–290 complications, 288–289 conversion to open procedure, 290 evolution of, 281 guidelines to avoid complications, 288 indications, 281–282 preoperative planning, 282 surgical technique, 282–290 anesthesia, 283–284 arthroscopic equipment needs, 283 cannula placement, 285 endoscopic examination, 285–286 entry portal positioning, 284

[Chow technique] [surgical technique] exit portal positioning, 285 instrumentation of ECTRAe System kit (Smith & Nephew), 283, 284 operating room setup, 282–283 portals creation, 285, 286 transverse carpal ligament release, 287–288 Closed catheter irrigation (CCI) technique. See Pyogenic ﬂexor tensosynovitis, closed catheter irrigation. Condylar fracture of middle phalanx, mini screw ﬁxation, 51 Condylar fracture of proximal phalanx, mini screw ﬁxation, 47 Cystic scaphoid nonunion image, 108 Delayed union, external ﬁxation of metacarpals and phalanges, 74 DeQuervain’s release, endoscopic, 317–319 indications/contraindications, 317 outcomes, 318 postoperative management, 318 surgical technique, 317–318 Digit, cross-section of, 4 Displaced fractures, percutaneous scaphoid ﬁxation, 89 Distal radial malunion established, 192 intramedullary nail. See Intramedullary nail repair, distal radial malunions. volar plating. Volar plating, distal radial malunions. Distal radial osteotomies, non-bridging external ﬁxation, 145–146 Distal radius bridge plate, 154–155 Distal radius fractures AO/AISF, classiﬁcation, 176, 183 augmented external ﬁxation. See Augmented external ﬁxation, distal radius fractures. balloon reduction and grafting. See Balloon reduction and grafting, distal radius fractures. bone graft substitutes and, 13–14 cannulated screws and, 34 dorsal nail plate ﬁxation. See Dorsal nail plate ﬁxation, distal radius fractures. limited approach open reduction. See Limited approach open reduction/internal ﬁxation, distal radius fractures. MICRONAIL. See MICRONAIL, distal radius fractures. spanning plating. See Spanning plating, distal radius fractures. Distal radius, Rikli and Gregazzoni’s division, 182 Distal scaphoid excision, 250 complications, 250 indications/contraindication, 250 outcomes, 250 preoperativeplanning, 250 surgical technique, 250 Dorsal malunion, intramedullary nail repair, 194–195 Dorsal nail plate ﬁxation, distal radius fractures, 167–172 closure, 171 complications, 171–172 contraindications, 167 equipment, 168 fracture reduction, 168–170 implant description, 168 indications, 167 nail insertion, 168–170 vs. open techniques, 167

Index & 335

[Dorsal nail plate ﬁxation, distal radius fractures] operating room setup, 168 postoperative management, 171 preoperative imaging, 168 preoperative planning, 168 speciﬁc dianosis, 167 surgical technique, 168–170 Dorsal percutaneous approach to scaphoid nonunions, 107 Dupuytren’s contracture, 327–331 complications, 329 indications, 328 outcomes, 329–330 preoperative planning, 328 studies, 327 surgical technique, 328–329 Eastwood technique, for percutaneous trigger ﬁnger release, 312 ECTRAe System kit (Smith & Nephew), 283, 284 Endoscopic carpal tunnel release. See Chow technique; Single-portal Mirza technique. Endoscopic DeQuervain’s release. See DeQuervain’s release, endoscopic. Extensor tendon injuries, 2 External button, 5 External ﬁxation of metacarpals and phalanges, 73–80 arthrodesis, 74–75 closed fracture, 74 complications, 79 delayed union, 74 distraction osteogenesis, 75 established nonunion, 74 indications, 73–75 joint and soft tissue stabilization, 75 malunion, 74 open fracture, 73 osteogenesis. See Osteogenesis. osteomyelitis, 74 outcomes, 79–80 preoperative planning, 75 surgical technique, 75–78 operating room setup, 75 operative approach–fractures, 75–76 operative approach–distraction osteogenesis, 76–78 External ﬁxation of the distal radius, non-bridging. See Non-bridging external ﬁxation of distal radius. Extra-articular osteotomy, volar plating, 204–205 Fiber optic technology, 1 Fifth metacarpal base fracture, 38 Jahss maneuver, 39 methods of ﬁxation, 30 Finger joint contracture, percutaneous release. See Percutaneous release of posttraumatic ﬁnger joint contracture. Fingers, mid-axial approach, 3 Fixator placement, uniplanar external, 77 Flanged anchors, 6 Flexor tendon sheath anatomy, 2, 324 Four-part fractures, percutaneous and arthroscopic-assisted reduction, 232 Fractures displaced, percutaneous scaphoid ﬁxation, 89 implants for ﬁxation of, 21–23 nondisplaced, percutaneous scaphoid ﬁxation, 89–91

Geissler arthroscopic classiﬁcation, carpal instability, 224 Geissler technique, percutaneous approach to scaphoid nonunions, 107–110 HAKI knife (BK Meditech Inc.), 1 for percutaneous trigger ﬁnger release, 312–313 Herbert screw, 30 Herbert/Whipple cannulated screw, 31 Implants evolution of, 19 processing and sterilization, 19–20 properties of, 19 Index ﬁnger, mid-axial line, 4 Indiana tome, carpal tunnel release, 293–297 Intercarpal arthrodesis, cannulated screws and, 33 Intermediate column fractures, 182–183 Intermedullary rodding complications excessive distraction, 59–60 inadequate reduction, 58 infection, 61 malunion, 60, 61 nonunion, 61 penetration of the nail, 59 PIP joint extensor lag, 61 poor ﬁxation, 58–59 soft tissue injury, 60 stiffness, 60–61 locking technique, 59 metacarpal fractures, 55–56 complications, 56 operative approach, 57–58 preoperative imaging, 57 preoperative planning, 57 outcomes, 61–62 Intermedullary rodding, phalangeal fractures complications, 56 operative approach, 58 preoperative imaging, 57 preoperative planning, 57 Internal distraction plating. See Spanning plating, distal radius fractures. Interosseous ligament tear, 220. See also Arthroscopic treatment, wrist. Interphalangeal arthrodesis, cannulated screws and, 32 Interphalangeal joint arthrodesis. See Arthrodesis. Intra-articular distal radius fractures, percutaneous and arthroscopic-assisted reduction. relevant anatomy, 223 See also Percutaneous and arthroscopic-assisted reduction, intra-articular distal radius fractures. Intra-articular osteotomy, distal radial malunions, 205 Intramedullary nail repair, distal radial malunions, 191–201 closure, 197 dorsal incision, 193 dorsal malunion, 194–195 indications, 191–192 MICRONAIL and, 194 nascent malunion, 197 operating room setup, 194 operative technique, 194–197 outcome, 198 postoperative emanagement, 197

336 & Index

[Intramedullary nail repair, distal radial malunions] preoperative evaluation, 192–193 preoperative imaging, 193 preoperative planning, 192 surgical technique, 194 volarly angulated malunion, 196–197 Jahss maneuver, 39 Kaplan’s cardinal lines, 2 Kirschner wires in augmented external ﬁxation, 137 targeting guides, percutaneous scaphoid ﬁxation, 90 Lateral radiographic angles, normal, 118 Limited approach open reduction/internal ﬁxation distal radius fractures, 181–190 complications, 183 indications, 181 outcomes, 183–184 preoperative planning, 181 Rikli and Gregazzoni’s division of distal radius, 182 surgical technique, 181–183 volar ulnar approach, 185, 186 intermediate column fractures, 182–183 radial column fractures, 182 ulnar column fractures, 183, 185 Malunion distal radial volar plating and, 203–208 See Intramedullary nail repair, distal radial malunions. external ﬁxation of metacarpals and phalanges, 74 intermedullary rodding, 60, 61 Mandibular reconstruction plate, distal radius fractures, 154–155 Metacarpal fracture radiograph, 24 Metacarpal fractures intramedullary rodding. See Intermedullary rodding, metacarpal fractures. percutaneous mini screw ﬁxation. See Mini screw ﬁxation, phalangeal and metacarpal fractures. percutaneous pinning Bennett’s fracture, 38–39 Boxer’s fracture, 38 ﬁfth metacarpal base fracture (Baby Bennett’s), 38, 41 indications, 37 metacarpal shaft fractures, 38 second to fourth metacarpal base fractures, 38, 40, 41 surgical technique, 38 Metacarpal joint arthrodesis, cannulated screws and, 32 Metacarpal shaft fracture ﬁxation, surgical technique, 21–22 Metacarpal shaft fractures, 38. See also Metacarpal fractures, percutaneous pinning. Metacarpophalangeal joint fractures in the hand, arthroscopic treatment, 235–238 complications, 237–238 indications, 235 outcomes, 238 preoperative planning, 235 surgical technique, 235–236 Metal implants, problems fomr, 21 Metallic suture anchors, 5–6 MicroMite suture anchor, 9

MICRONAIL, distal radius fractures, 161–166 complications, 164–165 ﬁxation, 15 outcome, 166 preoperative planning, 161 surgical technique, 161–164 Midcarparl portals for wrist joint arthroscopy, 211 Mini screw ﬁxation, condylar fracture of proximal phalanx, 47 Mini screw ﬁxation, phalangeal and metacarpal fractures, 45–53 Bennett’s fracture, 46 complications, 51 intraoperative complications, 51–52 outcomes, 52–53 postoperative care, 50–51 rehabilitation, 50–51 surgical technique, 45–46 Mini-Acutrak cannulated screw, 31 Mirza technique. See Single-portal Mirza technique. Monobasic calcium phosphate, 11 MP joint arthroscopy, 214 Necrotic proximal pole image, 126 Non-bridging external ﬁxation of distal radius, 143–149 acute fractures, 144–145 complications, 146 ﬁxator pin placement, 144, 145 future direction, 149 indications, 143 osteotomy, 149 outcomes, 146, 148–149 preoperative planning, 143 surgical technique, 144 Non-bridging external ﬁxation, distal radial osteotomies, 145–146 Nonunion external ﬁxation of metacarpals and phalanges, 74 intemedullary rodding, 61 scaphoid, arthroscopic views, 108–114 scaphoid, classiﬁcation of, 106 See also Scaphoid nonunions, percutaneous and arthroscopic management. Osteogenesis, distraction, external ﬁxation of metacarpals and phalanges, 75 outcome, 80 Osteomed cannulated screw, 30–31 Osteomyelitis, external ﬁxation of metacarpals and phalanges, 74 Osteotomy, non-bridging external ﬁxation of distal radius, 149 Palmer classiﬁcation, triangular ﬁbrocartilage tears, 240 Percutaneous acute scaphoid fracture ﬁxation, 95–103 advanced imaging, 95–96 cannular screw placement, 100, 101 complications, 101 guide wire placement, 97–99 imaging, 95 indications, 95 operating room setup, 96 outcomes, 101–102 physical examination, 95 preoperative planning, 95–96 surgical technique, 96–101

Index & 337

Percutaneous and arthroscopic-assisted reduction, intra-articular distal radius fractures, 223–234 ARC traction tower, 225 Geissler arthroscopic classiﬁcation, 224 operating room setup, 224–226 outcomes, 233 surgical technique, 226–233 radial styloid fractures, 226–228 three-part fractures, 228 with extensive metaphyseal comminution, 230–232 four-part fractures, 232 ulnar styloid fractures, 233 Percutaneous approach to scaphoid nonunions arthroscopic views, 108–114 Geissler technique, 107–110 See also Scaphoid nonunions, percutaneous and arthroscopic management. Percutaneous pinning. See Phalangeal fractures, percutaneous pinning; Metacarpal fractures, percutaneous pinning. Percutaneous release of posttraumatic ﬁnger joint contracture, 83–88 cadaveric studies, 84 current treatment options, 84 etiology, 83–84 indications, 84 surgical technique, 86–87 Percutaneous scaphoid ﬁxation, dorsal technique, 89–94 arthroscopy, 91–92 displaced fractures, 89 ﬁxation, 92–93 implant selection, 89 indications, 89 nondisplaced fractures, 89–91 post-operative care, 93 scaphoid length, 92 targeting guide, 89 Percutaneous surgical technique, 86–87 Percutaneous trigger ﬁnger release, 311–316 complications, 315 Eastwood technique, 312 ﬁrst annular pulley release, 313 HAKI knife, 312–313 outcomes, 315–316 preoperativeplanning, 312 primary type, 311 surface anatomy of the palm, 313 surgical technique, 312–315 Phalangeal fracture ﬁxation surgical technique, 23 transverse, 42 Phalangeal fractures, 23 intramedullary rodding. See Intermedullary rodding, phalangeal fractures. percutaneous mini screw ﬁxation. See Mini screw ﬁxation, phalangeal and metacarpal fractures. percutaneous pinning indications, 38 outcomes, 41–42 surgical technique, 39–40 Phalangeal shaft, long oblique fractures, 48–49 Pilot hole, creation of, 6

PIP fracture dislocations, hipped ﬁxation and dynamic traction, 63–71 bent wire ﬁxator, 66–68, 69, 70 BioSymMetRic PIP ﬁxator, 64–65 “perfect circle” technique, 66 complications, 68–69 indications, 63–64 outcomes, 69–70 preoperative planning, 64 surgical techniques, 64–68 PIP joint anatomy, 83 percutaneous release of, 85 Prosthetic arthroplasty, proximal pole scaphoid nonunions, 125–130 arthroscopic views, 127–129 complications, 128–129 cosmetic appearance, 130 implant placement, 126–127 outcome, 129–130 preoperative imaging, 125 properative planning, 125 resection, 126 surgical technique, 125–127 Proximal phalanx, long oblique fracture of, 49, 52 Proximal pole scaphoid nonunions. See prosthetic arthroplasty, proximal pole scaphoid nonunions. Proximal row carpectomy, 250–254 complications, 251 indications/contraindication, 250–251 open, 251–252 long term outcomes, 253 outcomes, 252 technique, 251–252 outcomes, 251 preoperativeplanning, 251 surgical technique, 251 Pulley anatomy, 2–3 Pulley system of a ﬁnger, anatomy drawing, 324 Pyogenic ﬂexor tensosynovitis, closed catheter irrigation, 321–324 clinical photo, 322, 324 complications, 323 indications, 321 outcomes, 323–324 preoperative planning, 321 surgical technique, 322–323 variations in technique, 323 Radial column fractures, 182 Radial styloid fracture with cannulated screw repair, 34 percutaneous and arthroscopic-assisted reduction, 226–228 Radial styloidectomy, 247–250 complications, 249 indications/contraindication, 247 outcomes, 249 preoperativeplanning, 247–249 surgical technique, 249 Radiocarpal portals for wrist joint arthroscopy, 211 Radiographic angles, normal lateral, 118 RASL reconstruction, 117–123 complications, 121 contraindications, 117 indications, 117–118 outcome, 122

338 & Index

[RASL reconstruction] preoperativeplanning, 118 surgical technique, 119–121 ReUnitee, 22 screw and smooth pin, 20 screw set, 20 Rikli and Gregazzoni’s division of distal radius, 182 Scaphoid and lunate reconstruction. See RASL reconstruction. Scaphoid ﬁxation, percutaneous. See Percutaneous acute scaphoid fracture ﬁxation; Percutaneous scaphoid ﬁxation, dorsal technique. Scaphoid ﬁxation, volar technique, 33 Scaphoid fracture displacement radiograph, 25 Scaphoid fracture ﬁxation, 23–24 available implants, 24 cannulated screws and, 32–33 surgical technique, 23–24 Scaphoid length, in percutaneous scaphoid ﬁxation, 92 Scaphoid nonunions arthroscopic views, 108–114 classiﬁcation of, 106 midcarpal space views, 106 percutaneous and arthroscopic management, 105–115 dorsal percutaneous approach, 107 Geissler technique, 107–110 indications, 105–106 preoperative evaluation, 106 surgical techniques, 106–110 volar percutaneous approach, 106–107 Scaphoid nonunions. See also Prosthetic arthroplasty, proximal pole scaphoid nonunions. Scaphoid waist fracture image, 96 Screws cannulated. See Cannulated screws. conﬁguration, 29 mechanical properties of, 29–30 Second metacarpal shaft fracture radiograph, 21 Second to fourth metacarpal base fractures, 38, 40, 41 Secondary calcium phosphate, 11 Security clipe, carpal tunnel release, 299–303 Self-absorbable implants, adverse reactions to, 26 Single-portal Mirza technique, 275–279 complications, 276, 277 indications, 275 outcomes, 276 preoperative planning, 275 surgical technique, 275–276, 277, 278 Small Bone Fixation System, 1 Small bone soft tissue ﬁxation devices, list of, 7 Soft tissue ﬁxation devices, small bone, list of, 7 Soft tissue ﬁxation. See also Suture anchors. Soft tissue repair to bone using bone bridge, diagram of, 6 using pullout suture, diagram of, 6 Soft tissue surgery assessment of tissue, 6 bony bed preparation, 6 complications, 8–9 pilot hole, 6 rehabilitation and outcome, 7 Soft tissue suture to bone bridge, 5 Soft tissue suturing techniques, 6

Spanning plating, distal radius fractures, 151–159 ASIF compression plate, 154 complications, 156 contraindications, 152–153 distal radius bridge plate, 154–155 indications, 152 mandibular reconstruction plate, 154–155 outcomes, 156–157 postoperative protocol, 155–156 preoperative evaluation, 153 rehabilitation, 155–156 surgical technique, 154–155 Stener lesion, 6 Suture anchors considerations for use, 5–6 development of, 5 ﬂanged, 6 general surgical technique, 6 in hand surgery, 5–9 indications for, 5 Suture breakage, 8 Tendon excursion, 1–2 Threaded anchor, 8 Three part fractures with metaphyseal comminution, 230 percutaneous and arthroscopic-assisted reduction, 228, 230–232 Thumb CMC joint arthroscopy, 213–214 Thumb MP joint, ulnar collateral ligament repair, 6–7 Toggle anchor, 7 Toggling, 6 Transsaphoid perilunate fracture with cannulated screw repair, 33 Transverse phalangeal fracture ﬁxation, 42 Trapeziometacarpal joint anatomy, 212 Triangular ﬁbrocartilage tears arthroscopic wafer, 243–244 arthroscopy for anatomy, 239–240 complications, 244 debridement, 241–242 indications, 239 operating room setup, 240–241 outcomes, 244 Palmer 1A repair, 242 Palmer 1B repair, 243 preoperative planning, 239 repair, 242–243 surgical technique, 239 Palmer classiﬁcation, 240 Tricalcium phosphate, 11 Trigger ﬁnger in children, 31 clinical course, 311 See also Percutaneous trigger ﬁnger release. Ulnar collateral ligament (UCL), 6 Ulnar collateral ligament tears repair of, 25–26 surgical technique, 25–26 Ulnar styloid fractures, percutaneous and arthroscopicassisted reduction, 233

Index & 339

Ulnocarpal impaction. See Triangular ﬁbrocartilage tears, arthroscopy for. Unicondylar fracture, displaced, mini screw ﬁxation, 47, 48 outcome, 52 Uniplanar external ﬁxator placement, 77 Universal compression screw (Howmedica), 30 Volar percutaneous approach to scaphoid nonunions, 106–107 Volar plating, distal radial malunions, 203–208 complications, 205 extra-articular osteotomy, 204–205 intra-articular osteotomy, 205 outcomes, 208 preoperative planning, 203 schematic, 204 surgical technique, 203–205 Volarly angulated malunion, intramedually nail repair, 196–197 Wrist, arthroscopic treatment complications, 221 indications, 217–218 outcome, 221–222 preoperative planning, 218–219 surgical technique, 220–221

Wrist and hand arthroscopy, traumatic complications, 214–215 MP joints, 214 operative technique, 210–214 preoperative eplanning, 209 surgical setup, 209–210 surgical technique, 209–214 wrist joints, 210–213 Wrist and hand arthroscopy, traumatic. See also Thumb CMC joint arthroscopy. Wrist and hand arthroscopy, traumatic. See also Wrist joint arthroscopy. Wrist and hand arthroscopy, triangular ﬁbrocartilage tears. See Triangular ﬁbrocartilage tears. Wrist arthroscopic views, 211–212 Wrist ganglion cysts, arthroscopy, 257–261 complications, 259 indications, 257–258 outcomes, 260 preoperative planning, 258 surgical technique, 258–259 Wrist joint anatomy, dorsal perspective, 210 Wrist joint arthroscopy operative technique, 210–213 standard midcarpal portals, 211 standard radiocarpal portals, 211 trapeziometacarpal joint anatomy, 212