CUUK1062-Vanden
9780521811903
May 28, 2010
12:43
This page intentionally left blank
CUUK1062-Vanden
978052181190...
40 downloads
1223 Views
5MB Size
Report
This content was uploaded by our users and we assume good faith they have the permission to share this book. If you own the copyright to this book and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Start by pressing the button below!
Report copyright / DMCA form
CUUK1062-Vanden
9780521811903
May 28, 2010
12:43
This page intentionally left blank
CUUK1062-Vanden
9780521811903
May 28, 2010
12:43
G R A V I T Y–C A P I L L A R Y F R E E - S U R F A C E F L O W S Free-surface problems occur in many aspects of science and of everyday life, for example in the waves on a beach, bubbles rising in a glass of champagne, melting ice, pouring fl ws from a container and sails billowing in the wind. Consequently, the theory of gravity–capillary free-surface fl ws continues to be a fertile fiel of research in applied mathematics and engineering. Concentrating on applications arising from flui dynamics, Vanden-Broeck draws upon his years of experience in the fiel to address the many challenges involved in attempting to describe such fl ws mathematically. Whilst careful numerical techniques are implemented to solve the basic equations, an emphasis is placed upon the reader developing a deep understanding of the structure of the resulting solutions. The author also reviews relevant concepts in flui mechanics to enable readers from other scientifi field to develop a working knowledge of free-boundary problems.
i
CUUK1062-Vanden
9780521811903
May 28, 2010
12:43
OTHER TITLES IN THIS SERIES
All the titles below can be obtained from good booksellers or from Cambridge University Press. For a complete series listing visit http://www.cambridge.org/uk/series/sSeries.asp?code=CMMA Waves and Mean Flows ¨ HLER OLIVER BU Lagrangian Fluid Dynamics ANDREW BENNETT Plasticity SIA NEMAT-NASSER Reciprocity in Elastodynamics JAN D. ACHENBACH Theory and Computation in Hydrodynamic Stability W. O. CRIMINALE, T. L. JACKSON AND R. D. JOSLIN The Physics and Mathematics of Adiabatic Shear Bands T. W. WRIGHT Theory of Solidificatio STEPHEN H. DAVIS The Dynamics of Fluidized Particles ROY JACKSON Turbulent Combustion NORBERT PETERS Acoustics of Fluid–Structure Interactions M. S. HOWE Turbulence, Coherent Structures, Dynamical Systems and Symmetry PHILIP HOLMES, JOHN L. LUMLEY AND GAL BERKOOZ Topographic Effects in Stratifie Flows PETER G. BAINES Ocean Acoustic Tomography WALTER MUNK, PETER WORCESTER AND CARL WUNSCH B´enard Cells and Taylor Vortices E. L. KOSCHMIEDER
ii
CUUK1062-Vanden
9780521811903
May 28, 2010
12:43
GRAVITY – CAPILLARY FREE-SURFACE FLOWS JEAN-MARC VANDEN-BROECK University College London
iii
CUUK1062-Vanden
9780521811903
May 28, 2010
12:43
CAMBRIDGE UNIVERSITY PRESS
Cambridge, New York, Melbourne, Madrid, Cape Town, Singapore, São Paulo, Delhi, Dubai, Tokyo Cambridge University Press The Edinburgh Building, Cambridge CB2 8RU, UK Published in the United States of America by Cambridge University Press, New York www.cambridge.org Information on this title: www.cambridge.org/9780521811903 © Cambridge University Press 2010 This publication is in copyright. Subject to statutory exception and to the provision of relevant collective licensing agreements, no reproduction of any part may take place without the written permission of Cambridge University Press. First published in print format 2010 ISBN-13
978-0-511-72961-4
eBook (NetLibrary)
ISBN-13
978-0-521-81190-3
Hardback
Cambridge University Press has no responsibility for the persistence or accuracy of urls for external or third-party internet websites referred to in this publication, and does not guarantee that any content on such websites is, or will remain, accurate or appropriate.
iv
CUUK1062-Vanden
9780521811903
May 28, 2010
12:43
To Mirna and Ada
v
CUUK1062-Vanden
9780521811903
May 28, 2010
12:43
vi
Contents
Preface
page xi
1
Introduction
1
2
Basic concepts 2.1 The equations of fluid mechanics 2.2 Free-surface flows 2.3 Two-dimensional flows 2.4 Linear waves 2.4.1 The water-wave equations 2.4.2 Linear solutions for water waves 2.4.3 Superposition of linear waves
7 7 8 11 15 15 17 24
3
Free-surface flows that intersect walls 3.1 Free streamline solutions 3.1.1 Forced separation 3.1.2 Free separation 3.2 The effects of surface tension 3.2.1 Forced separation 3.2.2 Free separation 3.3 The effects of gravity 3.3.1 Solutions with β1 = 0 (funnels) 3.3.2 Solutions with β1 = 0 (nozzles and bubbles) 3.3.3 Solutions with β1 = π/2 (flow under a gate with gravity) 3.4 The combined effects of gravity and surface tension 3.4.1 Rising bubbles in a tube 3.4.2 Fingering in a Hele Shaw cell 3.4.3 Further examples involving rising bubbles 3.4.4 Exponential asymptotics
31 33 33 43 58 58 66 73 83 88
vii
94 98 99 103 108 112
viii
4
Contents
Linear free-surface flows generated by moving disturbances 4.1 The exact nonlinear equations 4.2 Linear theory 4.2.1 Solutions in water of finite depth 4.2.2 Solutions in water of infinite depth 4.2.3 Discussion of the solutions
114 115 116 116 122 124
5
Nonlinear waves – asymptotic solutions 5.1 Periodic waves 5.1.1 Solutions when condition (5.55) is satisfied 5.1.2 Solutions when condition (5.55) is not satisfied 5.2 The Korteweg–de Vries equation
129 129 135 138 142
6
Numerical computations of nonlinear water waves 6.1 Formulation 6.2 Series truncation method 6.3 Boundary integral equation method 6.4 Numerical methods for solitary waves 6.4.1 Boundary integral equation methods 6.5 Numerical results for periodic waves 6.5.1 Pure capillary waves (g = 0, T = 0) 6.5.2 Pure gravity waves (g = 0, T = 0) 6.5.3 Gravity–capillary waves (g = 0, T = 0) 6.6 Numerical results for solitary waves 6.6.1 Pure gravity solitary waves 6.6.2 Gravity–capillary solitary waves
148 148 151 152 156 157 160 160 164 175 181 181 186
7
Nonlinear free-surface flows generated by moving disturbances 7.1 Pure gravity free-surface flows in water of finite depth 7.1.1 Supercritical flows 7.1.2 Subcritical flows 7.2 Gravity–capillary free-surface flows 7.2.1 Results in finite depth 7.2.2 Results in infinite depth (removal of the nonuniformity) 7.3 Gravity–capillary free-surface flows with Wilton ripples
8
Free-surface flows with waves and intersections with rigid walls 8.1 Free-surface flow past a flat plate 8.1.1 Numerical results
191 192 192 195 201 201 203 206 210 211 212
Contents
8.2
8.3
8.4
8.1.2 Analytical results Free-surface flow past a surface-piercing object 8.2.1 Numerical results 8.2.2 Analytical results Flow under a sluice gate 8.3.1 Formulation 8.3.2 Numerical procedure 8.3.3 Discussion of the results Pure capillary free-surface flows 8.4.1 Numerical results 8.4.2 Analytical results
ix
215 218 219 221 226 228 231 233 236 236 239
9
Waves with constant vorticity 9.1 Solitary waves with constant vorticity 9.1.1 Mathematical formulation 9.1.2 Numerical procedure 9.1.3 Discussion of the results 9.2 Periodic waves with constant vorticity 9.2.1 Mathematical formulation 9.2.2 Numerical procedure 9.2.3 Numerical results 9.2.4 Discussion
244 245 245 248 249 267 268 270 271 276
10
Three-dimensional free-surface flows 10.1 Green’s function formulation for two-dimensional problems 10.1.1 Pressure distribution 10.1.2 Two-dimensional surface-piercing object 10.2 Extension to three-dimensional free-surface flows 10.2.1 Gravity flows generated by moving disturbances in water of infinite depth 10.2.2 Three-dimensional gravity–capillary free-surface flows in water of infinite depth 10.3 Further extensions
278
11
Time-dependent free-surface flows 11.1 Introduction 11.2 Nonlinear gravity–capillary standing waves References Index
278 278 283 286 286 293 298 301 301 301 308 318
Preface
This book is concerned with the theory of gravity–capillary free-surface flows. Free-surface flows are flows bounded by surfaces that have to be found as part of the solution. A canonical example is that of waves propagating on a water surface, the latter in this case being the free surface. Many other examples of free-surface flows are considered in the book (cavitating flows, free-surface flows generated by moving disturbances, rising bubbles etc.). I hope to convince the reader of the beauty of such problems and to elucidate some mathematical challenges faced when solving them. Both analytical and numerical methods are presented. Owing to space limitations, some topics could not be covered. These include interfacial flows and the effects of viscosity, compressibility and surfactants. Some further developments of the theories described in the book can be found in the list of references. Many results presented in the book have grown out of my research over the last 35 years and, of course, out of the research of the whole fluid mechanics community. References to the original papers are given. For this book, I have repeated the older numerical calculations with larger numbers of grid points than was possible at the time. I am pleased to report that the new results are in agreement with the earlier ones! I am deeply indebted to my mentors, coworkers, students and friends who participated in the research. I feel very fortunate to have known them and I look forward to continuing these collaborations in the future. Special thanks are due to Scott Grandison for help with the figures, to David Tranah for his patience over the years in waiting for the manuscript, to Susan Parkinson for very careful copy-editing, to Caroline Brown for her help during production and to Cambridge University Press for publishing the book.
xi
1 Introduction
Free-surface problems occur in many aspects of science and everyday life. They can be defined as problems whose mathematical formulation involves surfaces that have to be found as part of the solution. Such surfaces are called free surfaces. Examples of free-surface problems are waves on a beach, bubbles rising in a glass of champagne, melting ice, flows pouring from a container and sails blowing in the wind. In these examples the free surface is the surface of the sea, the interface between the gas and the champagne, the surface of the ice, the boundary of the pouring flow and the surface of the sail. In this book we concentrate on applications arising in fluid mechanics. We hope to convince the reader of the beauty of such problems and to present the challenges faced when one attempts to describe these flows mathematically. Many of these challenges are resolved in the book but others are still open questions. We will always attempt to present fully nonlinear solutions without restricting assumptions on the smallness of some parameters. Our techniques are often numerical. However, it is the belief of the author that a deep understanding of the structure of the solutions cannot be gained by brute-force numerical approaches. It is crucial to combine numerical methods with analytical techniques, especially when singularities are present. Therefore analytical treatments will be presented whenever appropriate. We hope that the techniques discussed will be useful not only to researchers in the field but also to those working in areas other than fluid mechanics. For completeness the relevant concepts of fluid mechanics are reviewed in Chapter 2. Free-surface flows fall into two main classes. The first is the class of such flows for which there are intersections between the free surface and a rigid surface. The classic example in this class is the flow due to a ship moving at the surface of a lake, which involves an intersection between the free surface 1
2
Introduction
(i.e. the surface of the lake) and a rigid surface (i.e. the hull of the ship). Other examples are jets leaving a nozzle, cavitating flows past an obstacle, bubbles attached to a wall and flows under a sluice gate. In each case there is a rigid surface (the nozzle, the obstacle, the wall or the gate) that intersects a free surface. The second class contains free-surface flows for which there are no intersections between the free surface and a rigid wall. Here the classic example is the flow due to a submerged object moving below the surface of a lake. If the object is small compared with the size of the lake, it is then reasonable to regard the lake as being of infinite horizontal extent; then there is no intersection between the free surface and a rigid surface. Other examples include free bubbles rising in a fluid and solitary waves. Chapter 3 is concerned with the theory of free-surface flows of the first class. We use the classical assumptions of potential flow theory (irrotational flows of inviscid and incompressible fluids) and proceed in stages of increasing complexity. In addition we restrict our attention to steady and two-dimensional flows (time-dependent and three-dimensional flows are considered in the last two chapters). In the first stage the effects of gravity and surface tension are neglected. Such free-surface flows are called free streamline flows. They are characterized by a constant velocity along the free surfaces. Conformal mapping techniques can then be used to find exact nonlinear solutions. This situation is fortunate since there are very few such solutions for free-surface flows. The main results of the free streamline theory are summarized in Section 3.1. The most important result for the remaining part of Chapter 3 is that the velocity and slope of the free surface must be continuous at a separation point (i.e. the intersection between a free surface and a rigid surface in two dimensions) but the curvature of the free surface is in general infinite. Since this curvature only enters the equations when surface tension is included in the dynamic boundary condition, we expect a gravity flow with ‘small gravity’ to be a regular perturbation of a free streamline flows, and a capillary flow with ‘small surface tension’ to be a singular perturbation. This is confirmed by the numerical results presented in Sections 3.2 and 3.3. It is shown in Section 3.2 that the presence of surface tension does not remove the infinite curvature at the separation points. On the contrary it makes the problem more singular by introducing a discontinuity in slope at the separation point. Depending on the angle between the free surface and the rigid boundary, the velocity is infinite or equal to zero at the separation point. The appearance of an infinite velocity is a limitation of the model. We show that a basic way to remove this singularity is to take into account the finite thickness of the rigid walls,
Introduction
3
i.e. to consider the walls as thin objects with a continuous slope. When surface tension is neglected, the free surfaces leave the wall tangentially but the position of the separation point along the walls is free. We then have a one-parameter family of solutions (the parameter defines the position of the separation point) and the question is to determine which value of the parameter is physically relevant. This is an example of a ‘selection problem’. Selection problems are usually resolved by imposing an extra constraint on the problem or by including a previously neglected effect and taking the limit as this effect approaches zero. Here both approaches work. A unique position for the separation point is obtained by neglecting surface tension and imposing a constraint known as the Brillouin–Villat condition. Equivalently, the same position for the separation point is obtained by solving the problem with surface tension and then taking the limit as the surface tension approaches zero. We will show that the mechanism by which solutions with a small amount of surface tension are selected is related to the fact that, for each value of the surface tension, the separation point has only one position for which the free surface leaves the wall tangentially. In Section 3.3 we turn our attention to the effects of gravity on free streamline solutions. We assume that gravity is acting vertically downwards and neglect surface tension (the combined effects of gravity and surface tension are covered in Section 3.4). We show that it is again possible for the free surface not to leave the walls tangentially, but the angle between the free surface and the wall must be such that the velocity is finite at the separation point (infinite velocities cannot occur on a free surface in the absence of surface tension). Local analysis shows that there are only three possible behaviours at the separation point. In the first there is a horizontal free surface at the separation point, in the second there is an angle of 120◦ between the free surface and the wall and in the third the free surface leaves the wall tangentially. We show by examples (e.g. flows emerging or pouring from containers) that these three possibilities occur in free-surface flows with gravity. The restriction to three local behaviours is to be contrasted with the cases including surface tension discussed in Section 3.2, where all angles between the walls and the free surfaces are in principle possible. This contrast suggests that some interesting behaviours might emerge if we combine the effects of gravity and surface tension; this is confirmed in Section 3.4. We show in this section that some free-surface flow problems possess a continuum of solutions when surface tension is neglected and an infinite discrete set of solutions when surface tension is taken into account. This discrete set reduces to a unique solution as the surface tension approaches zero. Therefore a small amount of surface tension can again be used to select
4
Introduction
solutions. One difference between this selection mechanism and that described in Section 3.2 is that there is a infinite discrete set of solutions when surface tension is included instead of one solution. Another difference is that the selection is associated with exponentially small terms in the surface tension. This implies that exponential asymptotics is required to predict the selected solutions analytically. As we shall see, exponential asymptotics plays an important role in many other free-surface flow problems such as the study of gravity–capillary waves (see Chapter 6) and free-surface flows generated by moving disturbances for small values of the Froude number or small values of the surface tension (see Chapter 8). The results presented in Chapter 3 were obtained by a combination of various numerical schemes that the author has used successfully over the years to obtain highly accurate solutions for free-surface flow problems. They include series truncation techniques and boundary integral equation methods. The idea of the series truncation methods is to identify a rapidly convergent series representation for the solution that satisfies all the appropriate partial differential equations (for example the Laplace equation for potential flows) and all the linear boundary conditions. This often requires a local analysis to identify and remove the singularities associated with corners, stagnation points etc. The series is then truncated after a finite number of terms and the unknown coefficients are determined by satisfying the remaining nonlinear boundary condition (the pressure condition for free-surface flows) at appropriately chosen collocation points. This leads to a system of nonlinear algebraic equations which can be solved by iteration (for example by using Newton’s method). Boundary integral equation methods are based on a reformulation of the problem as a system of nonlinear integro-differential equations for the unknown quantities on the free surface. These equations are then discretised and the resultant nonlinear algebraic equations solved by iteration. Such boundary integral equation methods have been used extensively by many researchers. Insight into free-surface flows of the second class can be gained by studying the limitations of the classical linear theories. In particular we study in Chapter 4 the waves generated by a disturbance moving at a constant velocity (for example a submerged object or a pressure distribution). The results are qualitatively independent of the type of disturbance, and so most results in Chapter 4 are presented just for a pressure distribution with bounded support. A frame of reference moving with the pressure distribution is chosen and the flow is assumed to be steady. In the linear theory it is assumed that the disturbance is small enough for the flow to be a small perturbation of a uniform stream. The equations are then linearised (around a uniform
Introduction
5
stream) and the resulting linear equations solved by separation of variables and using Fourier transforms. These linear solutions can be expected to be a good approximation when the disturbance is small. In other words, if denotes the size of the disturbance, we expect the nonlinear solutions to approach the linear solutions as → 0. This is usually the case, but the problem is complicated by the fact that the solutions depend not only on but also on other parameters such as the Froude number F =
U (gH)1/2
and the capillary number α=
Tg . ρU 4
Here U is the velocity of the disturbance, H the depth of the fluid, T the surface tension, g the acceleration of gravity and ρ the density of the fluid. This leads to nonuniformities when these parameters approach critical values. These nonuniformities appear in an obvious way in the linear solutions. For example the linear theory for pure gravity flows (i.e. flows with T = 0) predicts infinite displacements of the free surface as F → 1. This is unacceptable since the linear theory assumes small perturbations around a uniform stream and in particular small displacements of the free surface. More precisely, for any F = 1 the linear theory provides a good approximation of the nonlinear problem as → 0. However, for any , no matter how small, the linear solutions become invalid as F → 1. A similar situation occurs for gravity–capillary flows. As α approaches a critical value αH , the linear theory again predicts infinite displacements of the free surface. The critical value αH depends on the depth H (for example αH = 0.25 in water of infinite depth). The resolution of these nonuniformities requires a nonlinear theory. We develop in Chapter 7 such a theory by solving the fully nonlinear equations numerically. This approach has the advantage of not pre-assuming a particular type of expansion. Furthermore it gives solutions without any assumption on the size of . It also provides a valuable guide in deriving appropriate perturbation expansions for small or moderate values of . We show in Chapter 7 that the resolution of the nonuniformities is associated with solitary waves. Near the critical values of α and F , there are not only solutions that are perturbations of a uniform stream (the nonlinear equivalent of the linear solutions mentioned earlier) but also solutions that are perturbations of solitary waves. Some of these solitary waves are of the
6
Introduction
well-known Korteweg–de Vries type but others are solitary waves with decaying oscillatory tails. As a preparation for the nonlinear results of Chapter 7 we present in Chapters 5 and 6 analytical and numerical solutions for nonlinear periodic and solitary waves. Such solutions describe the far-field behaviour of the nonlinear free-surface flows past disturbances described in Chapter 7. They are also interesting canonical free-surface flow problems. In particular we show that waves of the Korteweg–de Vries type have oscillatory tails of constant amplitude when surface tension is included. These waves are referred to as generalised solitary waves to distinguish them from true solitary waves, which are flat in the far field. In Chapter 8 we consider further free-surface flows of the first class (i.e. flows for which the free surface intersects rigid walls). The solutions of Chapter 3 approach either an infinitely thin jet in the far field or are waveless. We study in Chapter 8 various extensions for which the free surface is characterised by a train of nonlinear waves in the far field. An attractive feature of some of these flows is that exact formulae can be derived for the amplitude of the waves in the far field. These relations provide analytical insight and can be used to check the accuracy of the numerical codes. All the flows in Chapters 3–8 are assumed to be steady, two-dimensional and irrotational. The final three chapters of the book describe some extensions in which these assumptions are removed. In Chapter 9 we study solitary and periodic waves with constant vorticity. We show that there are new solution branches that do not have an equivalent for irrotational waves. In Chapter 10 we study some three-dimensional free-surface flows. In particular we calculate three-dimensional gravity–capillary solitary waves. These waves are characterised by decaying oscillations in the direction of propagation and monotonic decay in the direction perpendicular to the direction of propagation. Chapter 11 is concerned with time-dependent free-surface flows. This is a very large subject involving problems such as breaking waves, stability, the breaking of jets etc. Here we limit our attention to the subject of gravity– capillary standing waves. This choice is motivated by the fact that these standing waves have properties similar to those of the travelling gravity– capillary waves presented in Chapter 6.
2 Basic concepts
2.1 The equations of fluid mechanics We start with a brief introduction to the equations of fluid mechanics. For further details see for example Batchelor [8] or Acheson [1]. All the fluids considered in this book are assumed to be inviscid and to have constant density ρ (i.e. to be incompressible). Conservation of momentum yields the Euler equations 1 Du = − ∇p + X, Dt ρ
(2.1)
where u is the vector velocity, p is the pressure and X is the body force. Here D ∂ = +u·∇ (2.2) Dt ∂t is the material derivative. We assume that the body force X derives from a potential Ω, i.e. that X = −∇Ω.
(2.3)
In most applications considered in this book, the flow is assumed to be irrotational. Therefore ∇ × u = 0.
(2.4)
Relation (2.4) implies that we can introduce a potential function φ such that u = ∇φ.
(2.5)
∇ · u = 0.
(2.6)
Conservation of mass gives
7
8
Basic concepts
Then (2.5) and (2.6) imply that φ satisfies Laplace’s equation ∇2 φ = 0.
(2.7)
Flows that satisfy (2.4)–(2.7) are referred to as potential flows. Using the identity 1 (2.8) u · ∇u = ∇(u · u) + (∇ × u) × u, 2 (2.4) and (2.2) yield Du ∂u 1 = + ∇(u · u). (2.9) Dt ∂t 2 Substituting (2.9) into (2.1) and using (2.3) and (2.5) we obtain ∂φ u · u p + + + Ω = 0. (2.10) ∇ ∂t 2 ρ After integration, (2.10) gives the well-known Bernoulli equation ∂φ u · u p + + + Ω = F (t). ∂t 2 ρ
(2.11)
Here F (t) is an arbitrary function of t. It can be absorbed in the definition of φ, and then (2.11) can be rewritten as ∂φ u · u p + + + Ω = B, ∂t 2 ρ
(2.12)
where B is a constant. For steady flows (2.12) reduces to u·u p + + Ω = B. 2 ρ
(2.13)
2.2 Free-surface flows We introduce the concept of a free surface by contrasting the flow past a rigid sphere (see Figure 2.1) with that of the flow past a bubble (see Figure 2.2). Both flows are assumed to be steady and to approach a uniform stream with a constant velocity U as x2 + y 2 + z 2 → ∞; the effects of gravity are neglected. They can interpreted as the flows due to a rigid sphere or a bubble rising at a constant velocity U , when viewed in a frame of reference moving with the sphere or the bubble. The pressure pb in the bubble is constant. We denote by S the surface of the sphere or bubble and by n the outward unit normal. The flow past a sphere can be formulated as follows: φxx + φyy + φzz = 0 outside
S,
(2.14)
2.2 Free-surface flows
9
U z
y
S
x
Fig. 2.1. The flow past a rigid sphere. The surface S of the sphere is described by x2 + y 2 + z 2 = R2 , where R is the radius of the sphere.
U z
y S x
Fig. 2.2. The flow past a bubble. The surface S of the bubble is not known a priori and has to be found as part of the solution.
∂φ =0 ∂n
on S
(φx , φy , φz ) → (0, 0, −U ) as x2 + y 2 + z 2 → ∞.
(2.15) (2.16)
Equation (2.14) is Laplace’s equation (2.7) expressed in cartesian coordinates. The boundary condition (2.15) is known as the kinematic boundary condition. It states that the normal component of the velocity vanishes on S.
10
Basic concepts
Equations (2.14)–(2.16) form a linear boundary value problem whose solution is R3 z φ = −U z + . (2.17) 2(x2 + y 2 + z 2 )3/2 Here R is the radius of the sphere. We note that we have derived the solution (2.17) without using the Bernoulli equation (2.13), which for the present problem can be written as 1 2 1 p p∞ (φx + φ2y + φ2z ) + = U 2 + . 2 ρ 2 ρ
(2.18)
Here p∞ denotes the pressure as x2 + y 2 + z 2 → ∞. Equation (2.18) holds everywhere outside the sphere. In deriving (2.18) we have set Ω = 0 in (2.13) and evaluated B by taking the limit x2 + y 2 + z 2 → ∞ in (2.13). Then, using (2.16) gives B = U 2 /2 + p∞ /ρ. Equation (2.18) is nonlinear but it is only used if we want to calculate the pressure p inside the fluid. In other words the main problem is to find φ by solving the linear set of relations (2.14)–(2.16). We may then substitute the values (2.17) of φ into the nonlinear equation (2.18) if we wish to compute the pressure. We now show that we need to use the nonlinear boundary condition (2.18) to solve for the potential φ for a flow past the bubble of Figure 2.2. This implies that, because of its nonlinearity, the flow past a bubble is a much harder problem to solve than the flow past a sphere. The potential function φ still satisfies (2.14)–(2.16). However, the main difference is that the shape of the surface S of the bubble is not known and has to be found as part of the solution. In other words the equation of the surface S is no longer given as it was for the flow past a sphere. Therefore we need an extra equation to find S. This equation uses (2.18) and can be derived as follows. First we relate the pressure p on the fluid side of S to the pressure pb inside the bubble by using the concept of surface tension. If we draw a line on a fluid surface (such as S), the fluid on the right of the line is found to exert a tension T , per unit length of the line, on the fluid to the left. We call T the surface tension coefficient. It depends on the fluid and also on the temperature. It can be shown (see for example Batchelor [8]) that 1 1 + . (2.19) p − pb = T K = T R1 R2 Here R1 and R2 are the principal radii of curvature of the fluid surface: they are counted positive when the centres of curvature lie inside the fluid. The
2.3 Two-dimensional flows
quantity
K=
1 1 + R1 R2
11
(2.20)
is referred to as the mean curvature of the fluid surface. In most applications presented in this book the surface tension T is assumed to be constant. We now apply the Bernoulli equation (2.18) to the fluid side of the surface S and use (2.19). This gives T p∞ − pb 1 2 1 (φx + φ2y + φ2z ) + K = U 2 + 2 ρ 2 ρ
on
S.
(2.21)
Equation (2.21) is known as the dynamic boundary condition. This is the extra equation needed to find S. To solve the bubble problem we seek the function φ and the equation of the surface S such that (2.14)–(2.16) and (2.21) are satisfied. It is a nonlinear problem that requires the solution of a partial differential equation (here the Laplace equation (2.14)) in a domain whose boundary (here S) has to be found as part of the solution. This is a typical free-surface flow problem. In this book we will describe various analytical and numerical methods for investigating such nonlinear problems. We note that the problem of Figure 2.2 is an idealised one, in which the viscosity and gravity and the wake behind the bubble are neglected. Bubbles with wakes and the effect of including gravity will be considered in Section 3.4.3. Readers interested in the effects of viscosity are referred to, for example, [117]. The dynamic boundary condition (2.21) is valid for steady flows with Ω = 0. Combining (2.12) and (2.19) we find that the general form of the dynamic boundary condition (for unsteady flows) with Ω = 0 is T ∂φ u · u + + Ω + K = B. ∂t 2 ρ
(2.22)
Here B is the Bernoulli constant. For steady flows, (2.22) reduces to u·u T + Ω + K = B. 2 ρ
(2.23)
2.3 Two-dimensional flows As we shall see, many interesting free-surface flows can be modelled as twodimensional flows. We then introduce cartesian coordinates x and y with the y-axis directed vertically upwards (at present we reserve the letter z to denote the complex quantity x + iy). In most applications considered in
12
Basic concepts
this book, the potential Ω (see (2.3)) is due to gravity. Assuming that the acceleration of gravity g is acting in the negative y-direction, we write Ω as Ω = gy.
(2.24)
An example is the two-dimensional free-surface flow past a semicircular obstacle at the bottom of a channel (see Figure 2.3). This two-dimensional configuration provides a good approximation to the three-dimensional freesurface flow past a long half-cylinder perpendicular to the plane of the figure (except near the ends of the cylinder). The cross section of the cylinder is the semicircle shown in Figure 2.3.
y x
Fig. 2.3. Two-dimensional free-surface flow past a submerged semicircle.
For two-dimensional potential flows, (2.4) and (2.6) become ∂u ∂v − = 0, ∂y ∂x
(2.25)
∂u ∂v + = 0. ∂x ∂y
(2.26)
Here u and v are the x- and y- components of the velocity vector u. We can introduce a streamfunction ψ by noting that (2.26) is satisfied by u=
∂ψ , ∂y
v=−
∂ψ . ∂x
(2.27)
(2.28)
It then follows from (2.25) that ∇2 ψ =
∂2ψ ∂2ψ + = 0. ∂x2 ∂y 2
(2.29)
2.3 Two-dimensional flows
13
For two-dimensional flows, equations (2.5) and (2.7) give u=
∂φ , ∂x
(2.30)
v=
∂φ ∂y
(2.31)
and ∇2 φ =
∂2φ ∂2φ + 2 = 0. ∂x2 ∂y
(2.32)
Combining (2.27), (2.28), (2.30) and (2.31) we obtain ∂φ ∂ψ = , ∂x ∂y
(2.33)
∂φ ∂ψ =− . ∂y ∂x
(2.34)
Equations (2.33) and (2.34) can be recognised as the classical Cauchy– Riemann equations. They imply that the complex potential f = φ + iψ
(2.35)
is an analytic function of z = x + iy in the flow domain. This result is particularly important since it implies that two-dimensional potential flows can be investigated by using the theory of analytic functions. This applies in particular to all two-dimensional potential free-surface flows with or without gravity and/or surface tension included in the dynamic boundary condition. It does not apply, however, to axisymmetric and three-dimensional freesurface flows. Since the derivative of an analytic function is also an analytic function, it follows that the complex velocity u − iv =
∂φ ∂ψ ∂ψ df ∂φ −i = +i = ∂x ∂y ∂y ∂x dz
(2.36)
is also an analytic function of z = x + iy. The theory of analytic functions will be used intensively in the following chapters to study two-dimensional free-surface flows. In particular the following important tools will be useful. The first tool is conformal mappings. These are changes of variable defined by analytic functions. For example, if h(t) is an analytic function of t, the change of variables z = h(t) enables us to seek the complex velocity u − iv as an analytic function of t (since an analytic function of an analytic function is also an analytic function). Such conformal mappings are used to redefine
14
Basic concepts
a problem in a new complex t-plane in which the geometry is simpler than in the original z-plane. The second tool is Cauchy’s theorem: If h(z) is analytic throughout a simply connected domain D then, for every closed contour C within D, h(z)dz = 0. (2.37) C
The third tool is the Cauchy integral formula: Let h(z) be analytic everywhere within and on a closed contour C, taken in the positive sense (counterclockwise). Then the integral h(z) 1 dz (2.38) 2iπ C z − z0 takes the following values: 0 if z0 h(z0 ) if z0 1 h(z0 ) if z0 2
is outside C,
(2.39)
is inside C,
(2.40)
is on C.
(2.41)
When z0 is on C the integral (2.38) is a Cauchy principal value. We now show that for steady flows the streamfunction ψ is constant along streamlines. A streamline is a line to which the velocity vectors are tangent. Let us describe a streamline in parametric form by x = X(s), y = Y (s), where s is the arc length. Then we have − vX (s) + uY (s) = 0,
(2.42)
where the primes denote derivatives with respect to s. Using (2.27) and (2.28) we have ∂ψ ∂ψ dψ X (s) + Y (s) = = 0, ∂x ∂y ds
(2.43)
which implies that ψ is constant along a streamline. For steady flows the kinematic boundary condition implies that a free surface is a streamline. The streamfunction is therefore constant along a free surface. For two-dimensional flows the dynamic boundary condition (2.22) becomes ∂φ 1 2 T + (φx + φ2y ) + gy + K = B. (2.44) ∂t 2 ρ If we denote by θ the angle between the tangent to the free surface and the
2.4 Linear waves
15
horizontal then the curvature K can be defined by K=−
dθ ds
(2.45)
where again s denotes the arc length. In particular if the (unknown) equation of the free surface is y = η(x, t) then tan θ = ηx
and
1 dx = . ds (1 + ηx2 )1/2
(2.46)
Using (2.45), (2.46) and the chain rule gives the formula K=−
ηxx . (1 + ηx2 )3/2
(2.47)
2.4 Linear waves 2.4.1 The water-wave equations Many fre-surface flows involve waves on their free surfaces. When dissipation is neglected and the flow is assumed to be two-dimensional, these waves often approach uniform wave trains in the far field (see for example Figure 2.3). Therefore a fundamental problem in the theory of free-surface flows is the study of a uniform train of two-dimensional waves of wavelength λ extending from x = −∞ to x = ∞ and travelling at a constant velocity c. The flow configuration is illustrated in Figure 2.4. y
x
y = y1 y = y2
Fig. 2.4. A two-dimensional train of waves viewed in a frame of reference moving with the wave. The free-surface profile has wavelength λ. The fluid is bounded below by a horizontal bottom with equation y = −h. Also shown is the rectangular contour used in (2.56).
16
Basic concepts
For convenience we have chosen a frame of reference moving with the wave, so that the flow is steady. Using the notation of Section 2.3, we formulate the problem as φxx + φyy = 0, φy = φx ηx
−h < y < η(x), on y = η(x),
on y = −h,
φy = 0
1 2 ηxx T (φx + φ2y ) + gy − =B 2 ρ (1 + ηx2 )3/2
on y = η(x),
(2.48) (2.49) (2.50) (2.51)
∇φ(x + λ, y) = ∇φ(x, y),
(2.52)
η(x + λ) = η(x),
(2.53)
λ
η(x)dx = 0,
(2.54)
0
1 λ
λ
φx dx = c
on y = constant.
(2.55)
0
Here g is the acceleration of gravity (assumed to act in the negative ydirection), T is the surface tension, ρ is the density, y = −h is the equation of the bottom and y = η(x) is the equation of the (unknown) free surface. Equations (2.49) and (2.50) are the kinematic boundary conditions on the free surface and on the bottom respectively. Equation (2.51) is the dynamic boundary condition on the free surface. We have used (2.44) and the formula (2.47) for the curvature of a curve y = η(x). Relations (2.52) and (2.53) are periodicity conditions, which require the solution to be periodic with wavelength λ. Equation (2.54) fixes the origin of the y-coordinates as the mean water level. Finally, (2.55) defines the velocity c as the average value of u = φx at a level y = constant in the fluid. The value of c is independent of the constant chosen; this can be seen by applying Stokes’ theorem to the vector velocity (u, v) using a contour C consisting of two horizontal lines y = y1 , y = y2 and two vertical lines separated by a wavelength (see Figure 2.4). Since the flow is irrotational, udx + vdy = 0. (2.56) C
2.4 Linear waves
17
The contributions from the two vertical lines cancel by periodicity and (2.56) gives λ λ [u]y=y1 dx = [u]y=y2 dx. (2.57) 0
0
Since y1 and y2 are arbitrary, the integral on the left-hand side of (2.55) is independent of the level y = constant chosen in the fluid. The relations (2.48)–(2.55) are referred to as the water-wave equations because they model waves travelling at the interface between water and air (although they apply also to other fluids).
2.4.2 Linear solutions for water waves A trivial solution of the system (2.48)–(2.55) is φ = cx,
η(x) = 0 and B =
c2 . 2
(2.58)
This solution describes a uniform stream with constant velocity c, bounded below by a horizontal bottom and above by a flat free surface. Linear waves are obtained by seeking a solution as a small perturbation of the exact solution (2.58). Therefore we write φ(x, y) = cx + ϕ(x, y)
(2.59)
and assume that both |ϕ(x, y)| and |η(x)| are small. Substituting (2.59) into (2.48)–(2.55) and dropping nonlinear terms in ϕ and η, we obtain the linear system ϕxx + ϕyy = 0, ϕy = cηx , ϕy = 0, −
−h < y < 0,
(2.60)
y = 0,
(2.61)
y = −h,
(2.62)
T ηxx + cϕx + gη = 0, ρ
y = 0,
(2.63)
∇ϕ(x + λ, y) = ∇ϕ(x, y),
(2.64)
η(x + λ) = η(x),
(2.65)
λ
η(x)dx = 0, 0
(2.66)
18
1 λ
Basic concepts λ
ϕx dx = 0
on y = constant.
(2.67)
0
We choose the origin of x at a crest and assume that the wave is symmetric about x = 0. Thus we impose the conditions ϕ(−x, y) = −ϕ(x, y),
(2.68)
η(−x) = η(x).
(2.69)
Using the method of separation of variables, we seek a solution of (2.60) in the form ϕ(x, y) = X(x)Y (y).
(2.70)
Substituting (2.70) into (2.60), (2.68) and (2.62) yields X(−x) = −X(x),
(2.71)
the ordinary differential equations X (x) Y (y) =− = constant = −α2 , X(x) Y (y)
(2.72)
and the boundary condition Y (−h) = 0.
(2.73)
Here we have chosen a negative separation constant in (2.72), so that the solution is periodic in x. Solutions of the two ordinary differential equations (2.72) satisfying (2.71) and (2.73) are written as X(x) = sin αx,
(2.74)
Y (y) = cosh α(y + h).
(2.75)
The periodicity condition (2.64) implies that α = nk,
(2.76)
2π λ
(2.77)
where n is a positive integer and k=
is the wavenumber. Multiplying (2.74) and (2.75) and taking a linear combination of the solutions corresponding to the values (2.76) of α, we obtain ϕ(x, y) =
∞ n=1
Bn cosh nk(y + h) sin nkx.
(2.78)
2.4 Linear waves
19
Here the Bn are constants. Using the periodicity and the symmetry conditions (2.69) and (2.65), we express η(x) as the Fourier series η(x) = A0 +
∞
An cos nkx
(2.79)
n=1
where the An are constants. The condition (2.66) implies that A0 = 0. Substituting (2.78) and (2.79) into (2.61) and equating the coefficients of sin nkx yields cAn = −Bn sinh nkh,
n = 1, 2, . . .
(2.80)
Similarly substituting (2.78) and (2.79) into (2.63) gives T An n2 k 2 + gAn + cBn nk cosh nkh = 0, ρ
n = 1, 2, . . .
Eliminating Bn between (2.80) and (2.81) yields T 2 2 c2 nk g+ n k − cosh nkh An = 0, ρ sinh nkh
n = 1, 2, . . .
(2.81)
(2.82)
Since we seek a nontrivial periodic solution η(x) = 0, we can assume without loss of generality that A1 = 0; then (2.82) with n = 1 implies that g T c2 = + k tanh kh. (2.83) k ρ Relation (2.82) for n > 1 gives An = 0,
n = 2, 3, . . . ,
(2.84)
provided that g+
c2 nk T 2 2 n k − cosh nkh = 0, ρ sinh nkh
n = 2, 3, . . .
(2.85)
If (2.85) is satisfied, the solution of the linear problem is ϕ=−
cA1 cosh k(y + h) sin kx, sinh kh η = A1 cos kx.
(2.86) (2.87)
If the condition (2.85) is not satisfied for some integer value m of n, the solution of the linear problem is ϕ=−
cAm cA1 cosh k(y + h) sin kx − cosh mk(y + h) sin mkx, sinh kh sinh mkh, (2.88)
20
Basic concepts
η1 = A1 cos kx + Am cos mkx,
(2.89)
where Am is an arbitrary constant. In the theory of linear waves, it is usually assumed that Am = 0. However, when we are developing nonlinear theories for water waves in Chapters 5 and 6, i.e. improving the linear approximations (2.88) and (2.89) by adding nonlinear corrections or solving the fully nonlinear problem (2.48)–(2.55) numerically, we shall see that Am = 0. Two consequences are the existence of many different families of nonlinear periodic gravity–capillary waves and the existence of solitary waves with oscillatory tails. The velocity c is called the phase velocity and equation (2.83) is the (linear) dispersion relation. Relation (2.83) implies that waves of different wavenumbers and therefore of different wavelengths travel at different phase velocities c. It is convenient to rewrite (2.83) in the dimensionless form 1 2 + τ kh tanh kh, (2.90) F = kh where F =
c (gh)1/2
(2.91)
T ρgh2
(2.92)
is the Froude number and τ=
is the Bond number. Relation (2.90) is shown graphically in Figure 2.5, where we present values of F 2 versus 1/(kh) = λ/(2πh) for four values of τ . The curves of Figure 2.5 illustrate that F 2 is a monotonically decreasing function of λ/h when τ > 1/3 and that it has a minimum for τ < 1/3. As λ/h → ∞, F → 1. The different behaviours for τ < 1/3 (minimum) and τ > 1/3 (monotone decay) in Figure 2.5 have many implications, in particular for the study of nonlinear periodic and solitary gravity–capillary waves (see Chapters 5 and 6). We now examine two particular cases. The first is the case of water of infinite depth. This is obtained by taking the limit kh → ∞ in (2.83), (2.86) and (2.87) and leads to ϕ = −cA1 eky sin kx,
(2.93)
η = A1 cos kx,
(2.94)
g T + k. k ρ
(2.95)
c2 =
2.4 Linear waves
21
2.0
1.5
1.0
0.5
0
0
2
4
6
8
10
12
14
Fig. 2.5. Values of F 2 versus 1/(kh). The curves correspond from top to bottom to τ = 1.3, τ = 1/3, τ = 0.1 and τ = 0.05. For τ < 1/3 the curves have a minimum whereas for τ > 1/3 the curves are monotonically decreasing.
Since kh = 2πh/λ, the infinite-depth results (2.93)–(2.95) provide an approximation to the finite-depth results (2.83), (2.86) and (2.87) when the wavelength λ is small compared with the depth h. Waves with g = 0, T = 0 are referred to as pure gravity waves. They are characterised in the case of infinite depth by the dispersion relation c2 =
g . k
(2.96)
Similarly, waves with g = 0, T = 0 are called pure capillary waves and are characterised in the infinite-depth case by the dispersion relation c2 =
T k. ρ
(2.97)
A simple calculation based on (2.95) shows that c2 reaches a minimum value given by 4T g 1/4 (2.98) cmin = ρ when k = kmin =
ρg 1/2 T
.
(2.99)
Graphs of c versus λ in units of cmin and λmin = 2π/kmin are shown in Figure 2.6. The solid curve corresponds to (2.95), the dotted curve to (2.97) and the broken curve to (2.96). These curves show that waves with λ > λmin are dominated by gravity and can be approximated by pure gravity waves
22
Basic concepts 2.0
1.5
1.0
0.5
0
0
1
2
3
4
5
6
Fig. 2.6. Values of c versus λ = 2π/k in units of cm in and λm in . The solid curve corresponds to (2.95), the dotted curve to (2.97) and the broken curve to (2.96).
for λ large. Waves with λ < λmin are dominated by surface tension and can be approximated by pure capillary waves for λ small. The second particular case is that of pure gravity waves (i.e. T = 0) in water of finite depth. Then (2.90) reduces to khF 2 = tanh kh.
(2.100)
d tanh kh ≤ 1, d (kh)
(2.101)
Since
equation (2.100) has a solution kh > 0 when F < 1. For F > 1 the only real solution of (2.100) is kh = 0. This implies that linear gravity waves only exist when F < 1; for F > 1, linear gravity waves are not possible. Flows characterised by F < 1 are called subcritical and those characterised by F > 1 are called supercritical. The distinction between subcritical and supercritical flows will appear often in this book. So far we have discussed linear waves in a frame of reference moving with the wave. This is a convenient choice because the flow is then steady. However, it is also useful to look at waves from the point of view of a fixed frame of reference in which the wave moves to the left at a constant velocity c. The nonlinear governing equations are then φxx + φyy = 0, ηt = φy − φx ηx φy = 0
−h < y < η(x, t),
(2.102)
on y = η(x, t),
(2.103)
on y = −h,
(2.104)
2.4 Linear waves
ηxx 1 T φt + (φ2x + φ2y ) + gy − =B 2 ρ (1 + ηx2 )3/2
23
on y = η(x, t),
(2.105)
φ(x + λ, y, t) = φ(x, y, t),
(2.106)
η(x + λ, t) = η(x, t),
(2.107)
λ
η(x, t)dx = 0.
(2.108)
0
A trivial solution of the system (2.102)–(2.108) is φ = 0,
η = 0 and B = 0.
(2.109)
We can construct linear waves by assuming a small perturbation of the exact solution (2.109) in the form of a wave travelling to the left at a constant velocity c. Therefore we rewrite φ and η in terms of two new functions φ¯ and η¯: ¯ + ct, y) and η(x, t) = η¯(x + ct) φ(x, y, t) = φ(x
(2.110)
Substituting (2.110) into the system (2.102)–(2.108) and dropping nonlinear terms in φ¯ and η¯, we obtain the linear system φ¯xx + φ¯yy = 0, c¯ ηx = φ¯y φ¯y = 0 cφ¯x + g η¯ −
−h < y < 0,
(2.111)
on y = 0,
(2.112)
on y = −h,
(2.113)
T η¯xx = 0 on y = 0, ρ
(2.114)
¯ + λ + ct, y) = φ(x ¯ + ct, y), φ(x
(2.115)
η¯(x + λ + ct) = η¯(x + ct),
(2.116)
λ
η¯(x + ct)dx = 0.
(2.117)
0
Following the derivation of (2.86)–(2.89), we find that the solution of (2.111)–(2.117) is cA1 φ¯ = − cosh k(y + h) sin k(x + ct), sinh kh
(2.118)
η¯ = A1 cos k(x + ct)
(2.119)
24
Basic concepts
if (2.85) is satisfied and cA1 cosh k(y + h) sin k(x + ct), φ¯ = − sinh kh −
cAm cosh mk(y + h) sin mk(x + ct), sinh mkh
η¯ = A1 cos k(x + ct) + Am cos mk(x + ct)
(2.120) (2.121)
if for n = m (2.85) is not satisfied. The dispersion relation is given as before by (2.83).
2.4.3 Superposition of linear waves Since the system (2.111)–(2.117) is linear, new solutions can be obtained by superposing solutions corresponding to different values of k and/or of A1 . We consider two particular superpositions for the solution (2.118), (2.119). The first corresponds to the superposition of two waves of the same amplitude travelling at the same velocity but in opposite directions. This gives η = A1 cos k(x + ct) + A1 cos k(x − ct), φ=− +
(2.122)
cA1 cosh k(y + h) sin k(x + ct) sinh kh cA1 cosh k(y + h) sin k(x − ct). sinh kh
(2.123)
Using the trigonometric identities cos p + cos q = 2 cos
p−q p+q cos 2 2
(2.124)
sin p + sin q = 2 sin
p+q p−q cos 2 2
(2.125)
we can rewrite (2.122), (2.123) as η = 2A1 cos kx cos kct, φ = −2
cA1 cosh k(y + h) cos kx sin kct. sinh kh
(2.126) (2.127)
The solution defined by (2.126), (2.127) is known as a linear standing wave because the position of its nodal points and of the maximum displacement of the free surface are fixed as t varies. The wave does not propagate and
2.4 Linear waves
25
its free surface moves periodically up and down as t varies. The period of this motion is 2π . (2.128) Ts = kc Since u = φx = 0 along the lines x = 0 and x = π/k = λ/2, we can replace these two lines by walls (the kinematic boundary condition on them is then automatically satisfied). The resulting flow models the periodic sloshing of a liquid in a container (see Figure 2.7). 0.2
0.1
0
0
1
2
3
Fig. 2.7. Standing wave for A1 = 0.1 and k = 1. The broken line is the free-surface profile at t = 0 and the dotted line is the free-surface profile at t = Ts /2. This flow models liquid sloshing in a container bounded by vertical walls at x = 0 and x = π.
An interesting question is whether there are similar nonlinear solutions. This question is addressed in Chapter 11, where we construct analytical approximations to such solutions. The second example of superposition that we consider is that of two wave trains of the same amplitude travelling in the same direction but with slightly ¯ We first introduce the angular frequency different wavenumbers k and k. ω = kc and write ω = W (k). Using (2.83) we have 1/2 g T + k tanh kh . W (k) = k k ρ
(2.129)
(2.130)
Next we rewrite (2.118) and (2.119) as η¯ = A1 cos[kx + W (k)t],
(2.131)
cA1 φ¯ = − cosh k(y + h) sin[kx + W (k)t]. sinh kh
(2.132)
26
Basic concepts
The superposition described above then yields ¯ + W (k)t]. ¯ η¯ = A1 cos[kx + W (k)t] + A1 cos[kx
(2.133)
Using the identity (2.124), we can rewrite (2.133) as
1 1 ¯ + [W (k) + W (k))t ¯ η¯ = 2A1 cos [(k + k)]x 2 2 × cos
1 1 ¯ ¯ [(k − k)]x + [(W (k) − W (k)t] . 2 2
(2.134)
For k¯ close to k, we may approximate (2.134) by η¯ = α(x, t) cos[kx + W (k)t], where
α(x, t) = 2A1 cos
1 1 ¯ + [W (k) − W (k)]t ¯ (k − k)x . 2 2
(2.135)
(2.136)
The expression (2.135) is the same as (2.131) except that the constant amplitude A1 has been replaced by the variable amplitude α(x, t). Differentiating (2.136) with respect to x and t yields
1 ∂α 1 ¯ ¯ ¯ = −A1 (k − k) sin (k − k)x + [W (k) − W (k)]t (2.137) ∂x 2 2 and ∂α ¯ sin = −A1 [W (k) − W (k)] ∂t
1 1 ¯ + [W (k) − W (k)]t ¯ (k − k)x . (2.138) 2 2
¯ The derivatives (2.137) and (2.138) are of order k − k¯ and W (k) − W (k) ¯ respectively. They are therefore small for k close to k. This implies that the amplitude α(x, t) is a slowly varying function of x and t. In other words, the solution is a wave of wavenumber k, travelling at velocity c, whose amplitude α(x, t) is slowly modulated. The amplitude α(x, t) is itself a wave travelling at velocity ¯ W (k) − W (k) . (2.139) k − k¯ For k¯ close to k, the velocity (2.139) becomes cg =
dW (k) . dk
(2.140)
2.4 Linear waves
27
The velocity cg is called the group velocity. In general it differs from the phase velocity c=
W (k) . k
For water waves, (2.130) and (2.140) give −1/2 1 T 3 cg = gk + k tanh kh 2 ρ kh 3T k 2 T 2 × g+ tanh kh + g + k . ρ ρ cosh2 kh
(2.141)
(2.142)
We now examine in more detail the case of infinite depth. The phase velocity c is then given by (2.95). Taking the limit kh → ∞ in (2.142), we obtain −1/2 1 3T k 2 T k3 g+ gk + . (2.143) cg = 2 ρ ρ In particular, we have for pure gravity waves (g = 0, T = 0) 1 g 1/2 c = cg = 2 k 2 and for pure capillary waves (T = 0, g = 0) 3 T k 1/2 3c = . cg = 2 ρ 2
(2.144)
(2.145)
The phase velocity c is the velocity at which the wave travels. The group velocity cg is the velocity at which the slowly varying amplitude travels. This phenomenon is illustrated in Figure 2.8, where we present the solution (2.135) for pure gravity waves of infinite depth. Here we have assumed g = 1, k = 1, k¯ = 1.1 and A1 = 0.2 and have chosen t = 0. The outside curves are the envelope of the wave train. Both the wave train and the envelope travel to the left. Using (2.96) we find that the wave train travels at the speed c = 1 whereas (2.144) shows that the envelope travels at the speed cg = 1/2. Since cg < c the waves will advance in their envelope, and as they approach the nodal points of their envelope they will progressively die out. However, waves are born just ahead of the nodal points of the envelope. These graphical results illustrate that the wave travels at the velocity c whereas the envelope of the wave (i.e. the amplitude) travels at the velocity cg .
28
Basic concepts 0.4
0.2
0
0
20
40
60
Fig. 2.8. The solution (2.135) for A1 = 0.2, k = 1 and k¯ = 1.1.
A simple relation between c and cg can be derived by combining (2.129) and (2.140) to give cg = c + k
dc . dk
(2.146)
Relation (2.146) shows that if c has a minimum for some value of k, then c = cg at this minimum (since dc/dk = 0 at a minimum). For example, in water of infinite depth c has a minimum for k = kmin , where kmin is given by (2.99) (see also Figure 2.6), and cg = c when k = kmin . On the right of the minimum in Figure 2.6 we have dc/dk < 0, and (2.146) implies that cg < c. Similarly, dc/dk > 0 on the left of the minimum in Figure 2.6 and cg > c. One important property of the group velocity is that it is the speed at which the energy of a linear wave travels. We will demonstrate this property in the particular case of pure gravity waves in water of finite depth. The analysis is similar to that presented in Billingham and King [13]. At a fixed value of x, the rate at which the fluid on the left does work on the fluid on the right is given by 0 ∂φ p dy. (2.147) −h ∂x The average of (2.147) over one period is ω Ef = 2π
t∗ +2π/ω
t∗
0
p −h
∂φ dydt, ∂x
(2.148)
where t∗ is an arbitrary value of t and ω is the angular frequency. The value of p is obtained by linearising (2.12) (with Ω = gy) around u = 0. This
2.4 Linear waves
29
gives p = −ρ
∂φ − ρgy + constant. ∂t
(2.149)
Using (2.118) we find t∗ +2π/ω t∗ +2π/ω ∂φ cA1 k cos k(x + ct)dt = 0. dt = − cosh k(y + h) ∂x sinh kh t∗ t∗ (2.150) Therefore (2.148) simplifies to t∗ +2π/ω 0 ∂φ ∂φ ω dydt. (2.151) Ef = −ρ 2π t∗ −h ∂t ∂x Substituting (2.118) into (2.151) and evaluating the integral yields ρA21 k 2 c3 sinh 2kh Ef = . (2.152) h+ 2k 4 sinh2 kh We now define the kinetic and potential energy per unit horizontal length by 2 0 ∂φ 2 ∂φ 1 ρ dy (2.153) + 2 ∂x ∂y −h and
η
0
1 ρgydy = ρgη 2 . 2
(2.154)
Averaging the quantities (2.153) and (2.154) over a wavelength gives the mean kinetic energy λ 0 2 2 ∂φ ∂φ ρ ¯ = dydx (2.155) + K 2λ 0 −h ∂x ∂y and the mean potential energy ρg V¯ = 2λ
λ
η 2 dx.
(2.156)
0
Substituting (2.118) and (2.119) into (2.155) and (2.156) gives, after integration, ¯ = V¯ = 1 ρgA21 . (2.157) K 4 Thus the total energy is ¯ + V¯ = 1 ρgA21 . E=K 2
(2.158)
30
Basic concepts
Combining (2.152) and (2.158) we obtain 2kh 1 Ef = E c 1 + . 2 sinh 2kh Using (2.142) with T = 0 gives cg =
c 2
1+
2kh sinh 2kh
(2.159)
.
(2.160)
Therefore comparing (2.159) and (2.160) yields Ef = Ecg .
(2.161)
This shows that the energy in the wave travels at the group velocity cg . This property will be used in Chapter 4, where we discuss the radiation condition.
3 Free-surface flows that intersect walls
We continue our study of free-surface flows by considering the twodimensional flow shown in Figure 3.1. The flow domain is bounded below by the horizontal wall AB and above by the inclined walls CD and DE and the free surface EF . The fluid is assumed to be incompressible and inviscid and the flow is assumed to be irrotational and steady. We introduce cartesian coodinates with the x-axis along the horizontal wall AB and the y-axis through the separation point E (here a separation point refers to an intersection of a free surface and a rigid wall). The angles between the walls CD and DE and the horizontal are denoted by γ1 and γ2 respectively. C γ1 D γ2
E y x
A
F B
Fig. 3.1. A two-dimensional free-surface flow bounded by the walls CD, DE and AB and the free surface EF . The separation point E is defined as the point at which the free surface EF meets the wall DE. Points C, A, F , B are at an infinite distance from E. The flow is from left to right.
The configuration of Figure 3.1 was chosen because it can be used to describe many properties of free-surface flows that intersect, i.e. adjoin, 31
32
Free-surface flows that intersect walls
rigid walls. These properties when understood for the flow of Figure 3.1 can then be used to describe locally flows with more complex geometries. There are various illustrations of the flow of Figure 3.1. The first is the flow emerging from a container bounded by the walls CD, DE and AB. When γ1 = γ2 = π/2, the configuration of Figure 3.1 models the flow under an infinitely high gate (see Figure 3.2). Here the point D is irrelevant and has been omitted from the figure. C
E F
A
B
Fig. 3.2. The free-surface flow under a gate. The flow is from left to right.
When γ1 = 0 and γ2 < 0, Figure 3.1 describes locally the flow near the bow or the stern of a ship (see Figure 3.3). A clear distinction between the stern and bow flows will be introduced in Chapter 8, when we discuss gravity flows with a train of waves in the far field. Further particular cases of Figure 3.1, which model bubbles rising in a fluid and jets falling from a nozzle, are described in Section 3.3.2. F E C A
D B
Fig. 3.3. A model for the free-surface flow near the bow or stern of a ship.
As mentioned in Chapter 1 we will proceed with problems of increasing complexity. Section 3.1 is devoted to free-surface flows with g = 0 and
3.1 Free streamline solutions
33
T = 0. Such flows are called free streamline flows and the corresponding free surfaces are called free streamlines. In Section 3.2 we will study the effect of surface tension (T = 0, g = 0). In Section 3.3 we will examine the effect of gravity (T = 0, g = 0). The combined effects of gravity and surface tension (T = 0, g = 0) are considered in Section 3.4. 3.1 Free streamline solutions 3.1.1 Forced separation We consider the flow configuration of Figure 3.1. Here the effects of gravity and surface tension will be neglected (T = 0, g = 0). We refer to this problem as one of forced separation because the free surface is ‘forced’ to separate at the point E where the wall DE terminates. We denote by u and v the horizontal and vertical components of the velocity. Using the incompressibility of the fluid and the irrotationality of the flow, we define a potential function φ(x, y) and a streamfunction ψ(x, y). As shown in Section 2.3, the complex potential f = φ + iψ and the complex velocity w = u − iv = df /dz are both analytic functions of z = x + iy. The wall AB is a streamline along which we choose ψ = 0. The walls CD and DE and the free surface EF define another streamline, along which the constant value of ψ is denoted by Q. We also choose φ = 0 at the separation point E. These two choices (ψ = 0 on AB and φ = 0 at E) can be made without loss of generality because φ and ψ are defined up to arbitrary additive constants. Bernoulli’s equation (2.13) with Ω = 0 yields p 1 2 (u + v 2 ) + = constant 2 ρ
(3.1)
everywhere in the fluid. The free surface EF separates the fluid from the atmosphere which is assumed to be characterised by a constant pressure pa . In the absence of surface tension, which we are assuming, the pressure is continuous across the free surface (see (2.19)). Therefore p = pa on the free surface. It follows from (3.1) that u2 + v 2 = U 2
on
EF ,
(3.2)
where U is a constant. A significant simplification in the formulation of the problem is obtained by using φ and ψ as independent variables. This choice was used by Stokes [144], to study gravity waves, and by Helmholtz [71] and Kirchhoff [90] (see also [19] and [69]) to investigate free streamline flows. We shall use it extensively in our studies of gravity–capillary free-surface flows. The
34
Free-surface flows that intersect walls
simplification comes from the fact that the flow domain is mapped into the strip 0 < ψ < Q shown in Figure 3.4. The free surface EF (whose position was unknown in the physical plane z = x + iy of Figure 3.1) is now part of the known boundary ψ = Q in the f -plane. Since u − iv is an analytic function of z and z is an analytic function of f (the inverse of an analytic function is also an analytic function), u − iv is an analytic function of f . ψ
C
D
E
ψ=Q
F
ψ=0
A
φ
B
Fig. 3.4. The flow configuration of Figure 3.1 in the complex potential plane f = φ + iψ.
A remarkable result is that many free streamline problems can be solved in closed form (see Birkhoff and Zarantonello [19] and Gurevich [69]). These exact solutions are obtained by using conformal mappings, and several methods have been derived to calculate them. The method we now choose to describe uses a mapping of the flow domain into the unit circle. It was chosen because it yields naturally to the series truncation methods used in Sections 3.2–3.4 to solve numerically problems with gravity and surface tension included. In the absence of gravity and surface tension, the flow approaches a uniform stream of constant depth H as x → ∞. It follows from the dynamic boundary condition (3.2) that this uniform stream is characterised by a constant velocity U . Since ψ = 0 on AB and ψ = Q on EF , H = Q/U . We define the logarithmic hodograph variable τ − iθ by the relation w = u − iv = eτ −iθ .
(3.3)
The function τ − iθ has some interesting properties. First, the quantity τ = 12 ln(u2 +v 2 ) is constant along free streamlines (see (3.2)). Second, θ can be interpreted as the angle between the vector velocity and the horizontal.
3.1 Free streamline solutions
35
Third, (3.3) leads, for steady flows, to a very simple formula for the curvature of a streamline. This formula can be derived as follows. Since the vector velocity is tangent to streamlines, θ is the angle between the tangent to a streamline and the horizontal. The curvature K of a streamline is given by (2.45). Using the chain rule, we can rewrite (2.45) as K=−
∂θ ∂ψ ∂θ ∂φ − . ∂φ ∂s ∂ψ ∂s
(3.4)
Along a streamline ψ is constant and therefore ∂ψ = 0 and ∂s
∂φ = eτ . ∂s
(3.5)
Subsituting (3.5) into (3.4) yields the simple formula K = −eτ
∂θ . ∂φ
(3.6)
We now introduce dimensionless variables by using U as the reference velocity and H as the reference length. Therefore ψ = 1 on the walls CD and DE and on the free surface EF . The dynamic boundary condition (3.2) becomes u2 + v 2 = 1
on EF.
(3.7)
We map the strip ABFC shown in Figure 3.4 into the unit circle in the t-plane by the conformal mapping e−πf =
(1 − t)2 . 4t
(3.8)
The flow configuration in the t-plane is shown in Figure 3.5. It can easily be checked that the points A and C are mapped into t = 0 and the points B and F are mapped into t = 1. The value of t at the point D is denoted by d. The free surface EF is mapped onto the portion t = eiσ ,
0 < σ < π,
(3.9)
of the unit circle. This can easily by shown by noting that the substitution of (3.9) into (3.8) gives, after some algebra, σ 1 φ = − ln sin2 π 2
on ψ = 1.
(3.10)
As σ varies from 0 to π, φ varies from ∞ to 0, so that (3.9) is the image of the free surface in the t-plane.
36
Free-surface flows that intersect walls
E
D
F B
C A
Fig. 3.5. The flow configuration of Figure 3.1 in the complex t-plane.
One might attempt to represent the complex velocity w = u − iv by the series ∞ an tn . (3.11) w= n=0
However, the series will not converge inside the unit circle |t| ≤ 1, because singularities can be expected at the corner D and as x → −∞ (i.e. at t = 0). Nevertheless we can generalise the representation (3.11) by writing w = G(t)
∞
an tn ,
(3.12)
n=0
where the function G(t) contains all the singularities of w. As we shall see in Sections 3.2–3.4, this type of series representation enables the accurate calculation of many free-surface flows with gravity and surface tension included. For the present problem we require G(t) to behave like w as t → 0 and as t → d. We can then expect the series in (3.12) to converge for |t| ≤ 1. To construct G(t), we find the asymptotic behaviour of w near the singularities by performing local asymptotic analysis near D and as x → −∞. The flow near D is a flow inside a corner. We will find the nature of the singularity at D by considering the general problem of a flow inside a corner of angle γ (see Figure 3.6). We introduce cartesian coordinates with the origin at the apex G of the corner. We choose ψ = 0 on the streamline HGL and φ = 0 at x = y = 0. Assuming without loss of generality that the flow is in the direction of the
3.1 Free streamline solutions
37
y
H
γ G
L
x
Fig. 3.6. Flow in a corner bounded by the walls GH and GL.
arrow, we have φ < 0 along the wall HG, φ > 0 along the wall GL and ψ > 0 in the flow domain. The flow configuration in the complex potential plane is shown in Figure 3.7. ψ
G
H
L
φ
Fig. 3.7. The flow configuration of Figure 3.6 in the complex potential plane. The flow domain is the upper half-plane ψ > 0.
We seek a solution of the form z = Aeiα f µ ,
(3.13)
where A > 0, µ and α are real constants. On the wall GL (where φ > 0), the kinematic boundary condition can be written as arg z = 0. Therefore (3.13) implies that α = 0.
(3.14)
On the wall GH (where φ < 0), the kinematic boundary condition can be
38
Free-surface flows that intersect walls
written as arg z = γ. Writing φ = eiπ |φ| and using (3.13), we find that α + πµ = γ.
(3.15)
Relations (3.14) and (3.15) imply that µ=
γ ; π
(3.16)
therefore (3.13) gives z = Af γ/π . Since
w=
dz df
(3.17)
−1 (3.18)
we obtain the formula w=
π 1−γ/π f Aγ
(3.19)
or, eliminating f between (3.17) and (3.19), w=
π −π/γ π/γ−1 A z . γ
(3.20)
Flows inside corners will occur in many flow configurations described in this book and we will refer often to the above local analysis. We note that the formulae (3.17), (3.19) and (3.20) still hold if the boundary GL in Figure 3.6 is an arbitrary straight line through G (i.e. if the angle HGL is rotated). The only difference is that α is then different from zero. The velocity at the point G is equal to zero when γ < π and is unbounded when γ > π see (3.20). We will refer to the flow of Figure 3.6 as a flow inside a corner when γ < π and as a flow around a corner when γ > π. For the flow of Figure 3.1, γ = π − γ2 + γ1 and (3.19) implies w = O[(f − φD − i)(γ2 −γ1 )/π) ]
as
f → φD + i,
(3.21)
where φD is the value of φ at the point D. Here we have used the classical O notation to indicate an estimate of the behaviour of a function. We recall that writing f (x) = O[g(x)] as x → x0
(3.22)
means that f (x) → A as g(x)
x → x0 ,
(3.23)
3.1 Free streamline solutions
39
where A is a constant. Similarly, f (x) = o[g(x)] as x → x0
(3.24)
means that f (x) → 0 as g(x)
x → x0 .
(3.25)
Using (3.8) yields f − φD − i = O[t − d] as
f → φD + i.
(3.26)
Combining (3.21) and (3.26) gives w = O[(t − d)(γ2 −γ1 )/π) ] as
t → d.
(3.27)
This concludes our local analysis near the point D. As x → −∞, the flow behaves like that due to a sink at x = y = 0. Therefore f ≈ −B ln z
x → −∞
as
(3.28)
where B is a positive constant. Differentiating (3.28) with respect to z gives w=
df B =− . dz z
(3.29)
Since the flux of the fluid coming from −∞ is 1 and the angle between the walls CD and AB is γ1 , we have B=
1 . γ1
(3.30)
Eliminating z between (3.28) and (3.29) gives as
f → −∞,
(3.31)
eπf = O(t) as
f → −∞.
(3.32)
t → 0.
(3.33)
G(t) = (t − d)(γ2 −γ1 )/π tγ1 /π
(3.34)
w = O[eγ1 f ] and relation (3.8) then implies that
Therefore (3.31) and (3.32) give w = O(tγ1 /π ) as Combining (3.27) and (3.33), we can choose
40
Free-surface flows that intersect walls
and write (3.12) as (γ2 −γ1 )/π γ1 /π
w = (t − d)
t
∞
an tn .
(3.35)
n=0
There are, of course, many other possible choices for G(t). For example G(t) in (3.34) can be multiplied by any function analytic in |t| ≤ 1. We now need to determine coefficients an in (3.35) such that the dynamic boundary condition (3.7) is satisfied. This can be done numerically by truncating the infinite series in (3.35) after N terms and finding the coefficients an , n = 0, . . . , N − 1 by collocation. This is the approach we will use when solving problems where the effects of gravity or surface tension are included in the dynamic boundary condition. However, it can checked that (γ2 −γ1 )/π ∞ 1 n an t = (3.36) 1 − td n=0
and therefore the present problem has the exact solution t − d (γ2 −γ1 )/π γ1 /π t . w= 1 − td
(3.37)
The existence of an exact solution for the flow of Figure 3.1 follows from the general theory of free streamline flows. This theory was developed by Kirchhoff [90] and Helmholtz [71]; see Birkhoff and Zarantonello [19] or Gurewich [69] for details. The free-surface profile is obtained by setting ψ = 1 in (3.8) and (3.37), calculating the partial derivatives xφ and yφ from the identity xφ + iyφ =
1 w
(3.38)
and integrating with respect to φ. As a first example let us assume that γ1 = γ2 = π/2 (see Figure 3.2). Then (3.37) reduces to w = t1/2
(3.39)
and (3.9), (3.38) and (3.39) yield xφ + iyφ = e−iσ/2 ,
0 < σ < π,
(3.40)
along the free surface EF . Differentiating (3.10) with respect to σ and applying the chain rule to (3.40) gives 1 σ xσ + iyσ = − cotan e−iσ/2 . π 2
(3.41)
3.1 Free streamline solutions
41
Integrating (3.41) with respect to σ and taking the real and imaginary parts gives 2 σ σ x = cotan + − 1 (3.42) π 2 π 2 σ sin + 1. (3.43) π 2 Relations (3.42) and (3.43) define the free-surface profile in parametric form. It is shown in Figure 3.8. y=
2.0
1.5
1.0
0.5
0
0
2
4
6
8
Fig. 3.8. Free-surface profile for the flow configuration of Figure 3.2. The position of the separation point E is indicated by a small horizontal line. The vertical scale has been exaggerated to show clearly the free-surface profile.
A classical parameter associated with this flow is the contraction ratio Cc , defined as the ratio yF /yE of the ordinates of the points F and E. Using (3.43) with σ = π and σ = 0, we obtain π ≈ 0.611. (3.44) Cc = π+2 As a second example, let us assume γ1 = 0 and γ2 = π/2 (see Figure 3.9). Then (3.37) becomes t − d 1/2 . (3.45) w= 1 − td Proceeding as in the previous example, we obtain 1/2 1 σ 1 − eiσ d xσ + iyσ = − cotan (3.46) π 2 eiσ − d on the free surface EF .
42
Free-surface flows that intersect walls C
D
E F
B
A
Fig. 3.9. A free-surface flow emerging from a container bounded by the horizontal walls CD and AB and by the verical wall DE.
Integrating (3.46) gives x and y on the free surface as functions of σ. There is a solution for each value of −1 < d < 0; the parameter d measures the length of the vertical wall DE in the complex t-plane. This is an inverse formulation in the sense that for each value of d the length of the wall DE in the physical plane is found at the end of the calculations, in the following way. We first calculate yφ for −1 < t < d by using (3.38) and (3.45). We then evaluate yt for −1 < t < d by using (3.8) and the chain rule. The length of the wall DE is then obtained by integrating with respect to t from −1 to d. A typical solution for d = −0.5 is shown in Figure 3.10. 1.6
1.2
0.8
0.4
0
0
1
2
3
4
Fig. 3.10. Computed free-surface profile for the flow configuration of Figure 3.9 with d = −0.5. The position of the separation point E is indicated by a small horizontal line. The vertical scale has been exaggerated to show clearly the freesurface profile.
3.1 Free streamline solutions
43
As d → 0, the length of the vertical wall DE tends to infinity and the flow reduces to that of Figure 3.2. As d → −1, the length of the vertical wall DE tends to zero and the flow reduces to a uniform stream. As a third example, we assume γ2 < 0 and γ1 = 0 (see Figure 3.3). As mentioned at the begining of this chapter, this configuration models the flow due to a surface-piercing obstacle moving at a constant velocity when viewed in a frame of reference moving with the obstacle. In particular it is a simple model for the flow near the stern or the bow of a ship. Again using (3.37), we obtain t − d γ2 /π . (3.47) w= 1 − td As in the previous two examples we use (3.47) to calculate xσ + iyσ on the free surface. After integration we obtain the shape of the free surface in parametric form. A typical free-surface profile for d = −0.2 and γ2 = −π/3 is shown in Figure 3.11. 1.0
0.8
0.6
0.4
0.2
0
0
1
2
3
4
Fig. 3.11. Computed free-surface profile for the flow configuration of Figure 3.3 with d = −0.2 and γ2 = −π/3. The position of the separation point E is indicated by a small horizontal line. The vertical scale has been exaggerated to show clearly the free-surface profile.
3.1.2 Free separation In Figures 3.1 and 3.9, on the one hand, the free surface is forced to separate from the rigid wall DE at E because the wall DE terminates at E. We refer to this situation as forced separation. On the other hand, if the infinitely
44
Free-surface flows that intersect walls
thin wall DE is replaced by a wall of finite thickness bounded by a smooth curve then in principle the point of separation E can be any point on the smooth curve (see Figure 3.12). We refer to this situation as free separation. D C
E F A
B
Fig. 3.12. The flow configuration of Figure 3.9 but with the vertical wall DE replaced by a wall bounded by a smooth curve.
We note that any solution corresponding to free separation represents also a solution with forced separation if the smooth curve is cut along a line through the separation point (see Figure 3.13). As we shall see in Section 3.2, the distinction between forced and free separation is important when studying the effects of surface tension. D C
E F A
B
Fig. 3.13. The flow configuration of Figure 3.12 when the smooth curve is cut by a vertical line.
3.1.2.1 Open cavities We now consider some solutions with free separation which will be useful in Section 3.2 when we consider the effects of surface tension. Figure 3.14 shows a particular case of Figure 3.12 for which the vertical rigid wall DE of Figure 3.9 has been replaced by a smooth ‘elliptical’ wall with equation 1/2 1/2 y˜ x ˜ + = 1. (3.48) ˜b a ˜
3.1 Free streamline solutions
45
Here x ˜ and y˜ refer to coordinates with the origin at the centre of the ellipse and a ˜ and ˜b are the semi-axes of the ellipse. C
D
E F A
B
Fig. 3.14. The flow of Figure 3.9 when the vertical wall DE is replaced by a smooth semi-elliptical wall.
If a ˜ ˜b, the semi-ellipse is thin and the configuration of Figure 3.14 can be viewed as that of Figure 3.9 but with the infinitely thin wall DE replaced by a smooth wall of finite thickness. In other words, Figure 3.14 takes into account the finite thickness of any real wall but approaches the configuration of Figure 3.9 as a ˜/˜b → 0. However, to study flows with free separation we shall assume that ˜b = a ˜ (i.e. that the semi-ellipse is a semicircle), so that flows corresponding to different positions of the separation point E can be clearly distinguished on the profiles. The flow of Figure 3.14 can be reflected in the wall CD. This yields the flow of Figure 3.15. It models a flow past a circular cylinder with a cavity behind it (see for example Batchelor [8] for a discussion of cavitating flows).
Fig. 3.15. Cavitating flow past a circular object in a domain bounded by two horizontal walls.
We shall study the flow of Figure 3.15 when the radius of the circle is very small compared with the distance between the horizontal walls, so that the circle can be assumed to be in a fluid unbounded in the vertical direction (see Figure 3.16). The angle between the free surface and the circle at the
46
Free-surface flows that intersect walls
separation points is denoted by β. For free streamline solutions β = 0. This follows from (3.20) with γ = β, which shows that a value β = 0 would generate a zero or an infinite velocity at the separation points. This would contradict (3.2). However, we shall see in Sections 3.2 and 3.4 that values β = 0 can occur when surface tension is taken into account. G y B
E
C
x
A
D
Fig. 3.16. The cavitating flow past a circle in an unbounded fluid domain. When the surface tension T is zero, the free surfaces leave the circle tangentially and β = 0. When T = 0, the angle β can be different from zero.
We define dimensionless variables by using the radius R of the circle as the reference length and the constant velocity U far upstream as the reference velocity. We introduce the potential function bφ, the streamfunction bψ and the complex potential f = bφ + ibψ. Without loss of generality we may choose φ = 0 at the point C and ψ = 0 on the streamlines ECAD and ECBG. Here and in the remaining part of this section, the letters E, C, B, G, A and D refer to Figure 3.16. The constant b is defined so that φ = 1 at the separation points A and B. The flow configuration in the complex potential plane is illustrated in Figure 3.17. We introduce the complex velocity u − iv and define the function τ − iθ by the relation (3.3). Using (3.6), we have K=−
eτ ∂θ . b ∂φ
(3.49)
We shall seek τ − iθ as an analytic function of φ + iψ in the half-plane ψ < 0 (see Figure 3.17). The solution in ψ > 0 can then be obtained by symmetry. The boundary conditions on ψ = 0 are given by θ=0
on ψ = 0,
−∞ < φ < 0,
(3.50)
3.1 Free streamline solutions
C
E
47
B
G
+1 A
D
Fig. 3.17. The flow of Figure 3.16 in the complex potential plane.
eτ ∂θ = 1 on ψ = 0, b ∂φ τ =0
on ψ = 0,
0 < φ < 1,
1 < φ < ∞.
(3.51) (3.52)
The condition (3.50) follows from symmetry. Equation (3.51) follows from (3.49) and the fact that the curvature of the rigid boundary ACB is 1. Relation (3.52) is the dynamic boundary condition rewritten in terms of τ . This completes the formulation of the problem. We seek τ − iθ as an analytic function of φ + iψ in ψ < 0 satisfying (3.50)–(3.52). We will solve the problem by following the series truncation method introduced in Section 3.1.1 (see (3.12)). First we map the flow domain into the unit circle in the complex t-plane by the transformation 1 1 1/2 . (3.53) = t− f t 2i The flow configuration in the t-plane in shown in Figure 3.18. The rigid surface ACB is mapped onto the circle |t| = 1 and the free surfaces AD and BG are mapped onto the imaginary axis. The conditions (3.50)–(3.52) become θ=0 eτ ∂θ =1 b ∂φ τ =0
on
0 < t < 1,
on t = eiσ , on t = ir,
−π/2 < σ < 0, −1 < r < 0.
(3.54) (3.55) (3.56)
Here we have described the unit circle |t| = 1 by t = eiσ , where σ is a real parameter. Following Brodetsky [23] and Vanden-Broeck [160] we represent τ − iθ by
48
Free-surface flows that intersect walls B
C
G E D
A
Fig. 3.18. The flow of Figure 3.16 in the complex t-plane.
an expansion, as follows: ∞
τ − iθ = − ln
1+t Bn tn . − 1−t
(3.57)
n=0
The derivation of (3.57) follows that leading to (3.12). There is a singularity at the point C where locally we have a flow inside a right angle corner (see Figure 3.16). Therefore, (3.19) yields u − iv ∼ f 1/2
as
f → 0.
(3.58)
Using (3.3) and (3.53) yields τ − iθ ∼ ln(1 − t) as t → 1. Thus τ − iθ + ln
1+t 1−t
(3.59)
is not singular and can be represented in the unit circle of the t-plane by a Taylor expansion. This leads to (3.57). One might argue that other singularities occur at the separation points A and B. However, these singularities are automatically taken into account by (3.53). We note that (3.57) implies
∞ (3.60) Bn tn , u − iv = G(t) exp − n=0
where G(t) =
1−t . 1+t
(3.61)
3.1 Free streamline solutions
49
Therefore (3.60) is similar to (3.12). The only difference is that the series has been rewritten as the exponential of a series. It can easily be checked that (3.54) and (3.56) are satisfied by assuming that the coefficients Bn are real and that Bn = 0 when n is even. Therefore we can rewrite (3.57) as ∞
τ − iθ = −ln
1+t An t2n−1 . + 1−t
(3.62)
n=1
We now determine coefficients An such that (3.55) is satisfied. This is done numerically by series truncation and collocation. Thus we truncate the infinite series in (3.62) after N terms, i.e. we write 1+t An t2n−1 . + τ − iθ ≈ −ln 1−t N
(3.63)
n=1
Next, we satisfy (3.55) at the mesh points σ = σI , where σI = −
π I, 2N
I = 1, 2, . . . , N.
(3.64)
This is achieved by using (3.62) to evaluate the values of τ , θ and ∂θ/∂φ at the mesh points (3.64) and substituting these values into (3.55). This leads to a system of N equations for the N + 1 unknowns An , n = 1, 2, . . . , N , and b. The last equation is obtained by fixing the position of the separation point A. This is done by imposing π (3.65) θ(σN ) = γ¯ − , 2 where the angle γ¯ is defined in Figure 3.16. The system of N + 1 nonlinear algebraic equations with N + 1 unknowns needs to be solved numerically by iteration. In most problems considered in this book, this is done by Newton’s method. This method can be described as follows. Assume that we want to solve a system of M nonlinear algebraic equations fi (x1 , x2 , . . . , xM ) = 0,
i = 1, 2, . . . , M, (n)
(n)
xj −
(n) xj
(3.66)
(n)
with M unknowns x1 , x2 , . . . , xM . Let (x1 , x2 , . . . , xM ) be the approximation of the solution at iteration n. Then we linearise the left-hand side of (3.66) around this iteration as (n) (n) (n) fi (x1 , x2 , . . . , xM )
+
M j=1
∂fi ∂xj
(n) .
(3.67)
50
Free-surface flows that intersect walls (n+1)
(n+1)
(n+1)
The next approximation, (x1 , x2 , . . . , xM ), is obtained by equating (3.67) to zero and solving the resulting linear system for x1 , x2 , . . . , xM . Each iteration is expensive since it requires solving a linear system of equations. However, the iterations usually converge quadratically so that only a few iterations are needed to obtain an accurate solution. The method (0) (0) (0) also requires an initial guess (x1 , x2 , . . . , xM ) to start the iterative process. When facing a problem with several solutions, the solution obtained after convergence will depend on the initial guess chosen. The matrix with elements ∂fi (3.68) ∂xj is called the Jacobian matrix; an attractive feature of Newton’s method is that bifurcations from branches of solutions can be found by monitoring the sign of its determinant. This is a consequence of the fact that the determinant vanishes at a bifurcation point (Keller [84]). The free-surface profiles are then obtained by integrating numerically the identity ∂y 1 ∂x +i (3.69) = e−τ +iθ . b ∂φ ∂φ The numerical results can be described in terms of the angle γ¯ (see Figure 3.16). Solutions can be obtained for all values 0 < γ¯ < π. However, only the solutions for γ ∗ < γ¯ < γ ∗∗ , where γ ∗ ≈ 55◦ and γ ∗∗ ≈ 124◦ , have a physical meaning for cavitating flow past a circle. For γ¯ < γ ∗ the solutions are not acceptable because then the free surfaces would enter the body (see the solution for γ¯ = 25◦ in Figure 3.19). They are nevertheless useful in describing the cavitating flow past the body obtained by cutting the circle along the straight line AB in Figure 3.16 and retaining only the portion on the left of AB. This cutting of the circle is similar to the cutting seen in Figure 3.13. For γ¯ > γ ∗∗ the solutions are not acceptable because the free surfaces cross each other (see the solution for γ¯ = 150◦ in Figure 3.19). The last acceptable solution, at γ¯ = γ ∗∗ , has free surfaces that approach the x-axis asymptotically as x → ∞ (see Figure 3.20). Physically acceptable solutions for γ¯ > γ ∗∗ can be obtained by considering cusped cavities. Cusped cavities were introduced numerically by Southwell and Vaisey [142] and analytically by Lighthill [98] and [99]. They will be calculated numerically by a boundary integral equation method in the next section.
3.1 Free streamline solutions
51
1.5
1.0
0.5
0
0
1
2
3
4
5
Fig. 3.19. Computed free-surface profiles for γ¯ = 25◦ , γ¯ = γ ∗ and γ¯ = 150◦ .
3
2
1
0
0
2
4
6
8
10
Fig. 3.20. The cavitating flow corresponding to γ¯ = γ ∗∗ ≈ 124◦ .
3.1.2.2 Cusped cavities Unwanted intersections of free surfaces, such as those described above for γ¯ > γ ∗∗ , occur in many applications. A classical example is the exact solution of Crapper [37] for nonlinear capillary waves travelling at a constant
52
Free-surface flows that intersect walls
velocity at the surface of a fluid of infinite depth (see Section 6.5.1 and Figures 6.8–6.11). Crapper’s solutions form a one-parameter family of solutions. The parameter can be chosen as the steepness s of the waves (i.e. the difference in height of the crests and the troughs divided by the wavelength). For small values of s, the waves are close to linear sine waves (see Figure 6.8). As s increases the waves develop rounded crests and sharp troughs (see Figure 6.9). When s reaches the critical value s∗ ≈ 0.73, the free surface develops a point of contact with itself and a small trapped bubble forms at the trough of the wave (see Figure 6.10). For s > s∗ , the free surface is self-intersecting and the solutions lose their physical meaning (see Figure 6.11). Vanden-Broeck and Keller [185] showed that physically acceptable solutions for s > s∗ can be obtained by preventing the free surface from self-intersecting. The resulting free-surface profiles for s > s∗ have trapped bubbles at the troughs, as in Crapper’s solution for s = s∗ . Since preventing self-intersection imposes an extra constraint on the solutions, an extra unknown is needed. This is provided by the pressure in the trapped bubble, which is found as part of the solution. The calculations of Vanden-Broeck and Keller [185] will be described in Section 6.5.1. Here we use a similar approach to find physically acceptable cavitating flows for γ¯ > γ ∗∗ , by preventing the crossing of the streamlines and seeking a family of cusped cavities (see Figure 3.21). y
B
E
C
γ
M
G
L
D
x
A
Fig. 3.21. Flow past a circle giving rise to a cusped cavity.
As we shall see there is a cusped cavity for each value of γ¯ > γ ∗∗ . These solutions approach the solution in Figure 3.20 as γ¯ → γ ∗∗ . In other words the x-coordinate of the cusp in Figure 3.21 tends to ∞ as γ¯ → γ ∗∗ and the corresponding solution approaches that of Figure 3.20. As γ¯ → 180◦ , the x-coordinate of the cusp tends to 2 and the cavity collapses to a point.
3.1 Free streamline solutions
53
Following the work of Vanden-Broeck and Keller [185], as mentioned above we need to identify a new unknown to prevent the intersection of the free streamlines. A natural choice is the pressure pc in the cavity. This is motivated by the fact that cusped cavities are closed (they do not extend to infinity as do the open cavities of Figure 3.19) and so we do not have to require that pc = pb . Therefore our dynamic boundary condition on the free surfaces AL and BM of Figure 3.21 is τ=
1 ln(1 + C), 2
(3.70)
where the cavitation number C is found as part of the solution. We define the potential function bφ and the streamfunction bψ and choose b so that φ = 1 at the separation points B and A. The flow configuration in the complex (φ, ψ)-plane is illustrated in Figure 3.22.
B E
C
+1 A
G D
Fig. 3.22. The flow of Figure 3.21 in the complex potential plane.
We solve the problem by a boundary integral equation method. This technique will be used extensively in the remaining part of the book. The basic idea is to reformulate the problem as a system of integro-differential equations that involves only unknowns on the boundary of the flow domain. This system is then discretised and the resultant algebraic equations are solved by iteration (usually Newton iteration). The obvious advantage is that mesh points are only needed on the boundary rather than in the whole flow domain. In other words the two-dimensional flow problem of Figure 3.21 is reduced to a one-dimensional problem on the boundary ECALD. As we shall see in Chapter 10, boundary integral equation methods can also be used for solving fully three-dimensional problems. There the three-dimensional problem is reduced to a two-dimensional problem on the boundary. A convenient way of deriving the system of integro-differential equations for two-dimensional flows is to use the Cauchy’s integral equation formula (see (2.38)–(2.41)). An alternative way which does not rely on complex variables is to use Green’s theorem and Green’s functions. For
54
Free-surface flows that intersect walls
three-dimensional problems, complex variables are not available and Green’s theorem and Green’s functions are the only way to derive the system of integro-differential equations. We can derive such a system for the problem of Figure 3.21 by applying the Cauchy integral equation formula in the (φ, ψ)-plane of Figure 3.22 to the function τ (φ, ψ) − iθ(φ, ψ) with a contour consisting of the axis ψ = 0 and a semicircle in ψ < 0 centred on φ = ψ = 0 and of arbitrary large radius. Since τ (φ, ψ) − iθ(φ, ψ) → 0 as ψ → −∞, there is no contribution from the semicircle and we obtain ∞ τ (ϕ, 0) − iθ(ϕ, 0) 1 dϕ when ψ < 0. (3.71) τ (φ, ψ) − iθ(φ, ψ) = − 2iπ −∞ ϕ − φ − iψ (see (2.40)). On the free surface, (2.41) gives 1 ∞ τ (ϕ, 0) − iθ(ϕ, 0) dϕ. τ (φ, 0) − iθ(φ, 0) = − iπ −∞ ϕ−φ
(3.72)
The integral in (3.72) is a Cauchy principal value. Taking the real and imaginary parts of (3.72) gives 1 ∞ θ(ϕ, 0) dϕ, (3.73) τ (φ, 0)) = π −∞ ϕ − φ 1 ∞ τ (ϕ, 0) θ(φ, 0) = − dϕ. (3.74) π −∞ ϕ − φ Relations (3.73) and (3.74) are known as Hilbert transforms. It can be shown that one implies the other. Therefore we are free to choose either (3.73) or (3.74). It turns out that (3.73) is the better choice because it leads to a relation between τ and θ on the portion CAL of the streamline ψ = 0. This follows from the fact that θ = 0 on EC and on LD. Therefore (3.73) simplifies to 1 l θ(ϕ, 0) dϕ. (3.75) τ (φ, 0) = π 0 ϕ−φ Here l is the value of φ at the cusp L. If we restrict the values of φ in (3.75) to 0 < φ < l, then (3.75) is a relation between τ and θ on CAL. The kinematic boundary condition on CA and the dynamic boundary condition (3.70) imply that eτ ∂θ = 1, b ∂φ τ=
0 < φ < 1,
1 ln(1 + C), 2
1 < φ < l.
(3.76) (3.77)
3.1 Free streamline solutions
Finally, we impose y = 0 at the cusp by writing l e−τ (ϕ,0) sin θ(ϕ, 0)dϕ = 0.
55
(3.78)
0
This completes the reformulation of the problem as a system of nonlinear integro-differential equations. We seek τ (φ, 0) and θ(φ, 0) such that (3.75)– (3.78) are satisfied. Once τ (φ, 0) and θ(φ, 0) are known for 0 < φ < l, then the shape of the cusped cavity and the velocity field in the flow domain can be calculated by integration in the following way. First the shape of the cavity is obtained in the parametric form x(φ, 0), y(φ, 0) by integrating the identity 1 (3.79) = e−τ (φ,0)+iθ(φ,0) . xφ + iyφ = u − iv Next, τ (φ, 0) for φ < 0 and φ > l can be calculated from (3.75). The values of τ (φ, 0) and θ(φ, 0) are then known for all −∞ < φ < ∞. Substituting these values in (3.71), we can evaluate by integration τ (φ, ψ) and θ(φ, ψ) everywhere in the flow domain. The velocity field is then given by (3.3). We will solve the problem numerically. First we define the mesh points φI =
I −1 , N −1
I = 1, . . . , M,
(3.80)
I = 1, . . . , M,
(3.81)
and the corresponding unknowns θI = θ(φI , 0),
where M and N are positive integers and l = (M − 1)/(N − 1). Since l > 1, we require M > N . We also use the midpoints φm I =
φI + φI+1 , 2
I = 1, . . . , M − 1.
(3.82)
We calculate τ (φm I ) in terms of the unknowns (3.81) by applying the trapezoidal rule to the integral in (3.75) and summing over the points (3.80). We justify this discretisation by showing that the symmetry of the quadrature and of the distribution of mesh points enable us to calculate the Cauchy principal value as if it were an ordinary integral. First we rewrite the integral on the right-hand side of (3.75) (evaluated at φm I ) as φI φI + 1 l θ(ϕ, 0) θ(ϕ, 0) θ(ϕ, 0) dϕ + dϕ + (3.83) m m m dϕ. ϕ − φI ϕ − φI 0 φI φ I + 1 ϕ − φI The first and third integrals in (3.83) are ordinary integrals and can therefore
56
Free-surface flows that intersect walls
be evaluated by the trapezoidal rule. The second integral in (3.83) is a Cauchy principal value, which we rewrite as
φI + 1
φI
θ(ϕ, 0) − θ(φm I , 0) dϕ + θ(φm I , 0) m ϕ − φI
φI + 1
φI
dϕ . ϕ − φm I
(3.84)
The second integral in (3.84) is also a Cauchy principal value. Simple integration shows that its value is zero. The first integral in (3.84) is an ordinary integral and can be evaluated by the trapezoidal rule as θI+1 − θ(φm θI − θ(φm h h θI+1 θI I , 0) h I , 0) h + = + . (3.85) m m m m φI − φI 2 φI+1 − φI 2 φI+1 − φI 2 φI − φI 2 The right-hand side of (3.85) is just the integral
φI + 1
φI
θ(ϕ, 0) dϕ ϕ − φm I
evaluated by the trapezoidal rule. Therefore the Cauchy principal value on the right-hand side of (3.75) can be evaluated by the trapezoidal rule as if it were an ordinary integral. This approach to evaluating Cauchy principal values will be used often in this book. We note that the derivation (3.83)– (3.85) can easily be extended to other integration formulae such as Simpson’s rule or for mesh points φM I that are not midpoints. The only differences are that the second integral in (3.84) might not be zero and that the left-hand side of (3.85) should be used instead of the right-hand side. We now return to our problem and satisfy (3.76) at the mesh points φm I , , I = N, . . . , M − 2. The I = 2, . . . , N − 1, and (3.77) at the mesh points φm I last three equations are given by (3.78) and by the geometric conditions π θ1 = − , 2
θM = 0.
(3.86)
This system of algebraic equations is solved by Newton’s method. Typical free-surface profiles are shown in Figure 3.23. It can be seen that as γ¯ → γ ∗∗ , C → 0. We note that the numerical procedure presented here is not restricted to a circular obstacle and can be generalised to ones of arbitrary shapes in the following way. First we denote by F (x, y) = 0 the equation of the rigid boundary CA (see Figure 3.21) and calculate x and y on CA by the formulae x(φ, 0) = 0
φ
e−τ (ϕ,0) cos θ(ϕ, 0)dϕ
(3.87)
3.1 Free streamline solutions
57
3
2
1
0
0
2
4
6
8
10
Fig. 3.23. Three computed cusped cavities. The cavitation numbers C from the smallest cavity to the largest are −0.55, −0.29 and −0.1 respectively.
and y(φ, 0) =
φ
e−τ (ϕ,0) sin θ(ϕ, 0)dϕ.
(3.88)
0
We then apply the numerical procedure described above, the equations obtained by satisfying (3.76) at the mesh points φm I , I = 2, . . . , N − 1, being replaced by the new equations m F [x(φm I , 0), y(φI , 0)] = 0,
I = 2, . . . , N − 1,
(3.89)
where x(φ, 0) and y(φ, 0) are defined by (3.87) and (3.88). The solutions derived in this section are examples of cavitating flows with C < 0. Such cavities were considered analytically by Lighthill [98], [99]. Batchelor [8] notes that such cavities have not been observed, perhaps because the boundary layer at the rigid surface would separate before reaching the low-velocity region where the free streamlines begin. Before concluding this section, let us mention that there are many cavity models with C > 0 (the Riabouchinsky model, the re-entrant jet model, the Roskho model etc). The reader interested in these models is referred to the books of Birkhoff and Zarantonello [19] and Gurevich [69].
58
Free-surface flows that intersect walls
3.2 The effects of surface tension In this section we will investigate the effects of the surface tension T on the free streamline solutions of Section 3.1. We show that the limit T → 0 is singular. When T = 0, discontinuities in slope can appear at the separation points. In particular, values of β = 0 can occur in Figure 3.16. We shall also show that the limit T → 0 can be used to select solutions. 3.2.1 Forced separation We start our study by investigating the local behaviour of the flow of Figure 3.1 near the separation point E, in the absence of surface tension. For simplicity we assume γ1 = γ2 = π/2, i.e. we consider the flow shown in Figure 3.2. The point E corresponds to t = −1, ψ = 1 and φ = 0. Using (3.8) we find 1 (3.90) φ ≈ − (t + 1)2 as t → −1. 4π Relation (3.39) gives i w ≈ i − (t + 1) as 2
t → −1.
(3.91)
Furthermore (3.3) gives w ≈i+θ+
π 2
as
t → −1.
Combining (3.90)–(3.92), we obtain π θ ≈ − + (πφ)1/2 . 2
(3.92)
(3.93)
Since eτ = 1 at E, (3.6) implies that K ≈ −Sφ−1/2
as φ → 0,
(3.94)
where 1 S = π 1/2 . 2
(3.95)
Therefore the flow leaves the wall DE tangentially (see (3.93)) but the curvature of the free surface at E is unbounded (see (3.94)). It can be shown that (3.94) holds for γ1 = π/2 and γ2 = π/2. Of course, the value of S depends on γ1 and γ2 . These free streamline results show that an infinite curvature can occur at the separation points. This singularity does not invalidate the free streamline theory because the curvature does not appear explicitly in the equations
3.2 The effects of surface tension
59
and does not have a direct physical meaning. However, when surface tension is taken into account, the condition p = pa on the free surface is replaced by p = pa + T K,
(3.96)
where T is the surface tension and K is the curvature of the free surface (see (2.19)). It follows from (3.1) and (3.96) that the dynamic boundary condition on the free surface becomes T 1 2 (u + v 2 ) + K = constant. (3.97) 2 ρ Equation (3.97) shows that an infinite curvature at the separation point E implies an infinite velocity at E. This implies that solutions with T = 0 are qualitatively different from the solutions with T = 0 of Section 3.1.1. It also suggests that the limit T → 0 is a singular limit. These two properties are confirmed by the calculations below. Ackerberg [2], Cumberbatch and Norbury [39], Vanden-Broeck ([159], [160], [163], [164], [176]) and others studied the flow configuration of Figure 3.2 (and related free-surface flows) in the limit as T → 0. The results of Vanden-Broeck showed that the inclusion of surface tension in the free streamline flows of Section 3.1.1 does not remove the infinite curvature at the separation points. On the contrary, it makes the flow more singular by introducing a discontinuity in slope at the separation points. In other words there is an angle β = 0 between the tangent to the free surface at the separation point and the wall (see Figure 3.24). C
E β
A
F
B
Fig. 3.24. The flow under a gate with surface tension included in the dynamic boundary condition. The free surface does not leave the gate tangentially: there is an angle β = 0 between the free surface and the gate at the separation point E.
This angle β is a function of the surface tension. We now demonstrate
60
Free-surface flows that intersect walls
these findings by presenting asymptotic results, for T small. We will present later fully nonlinear computations for arbitrary values of T . We assume that the flow in Figure 3.24 is characterised by a uniform stream with constant velocity U as x → ∞. As in Section 3.1.1, we define dimensionless variables by taking U as the unit velocity and H = Q/U (for a definition of Q see Figure 3.4) as the unit length. The dynamic boundary condition (3.97) in dimensionless form is then 1 1 2 (u + v 2 ) + K = constant, 2 α
(3.98)
where α=
ρU 2 H . T
(3.99)
Since u2 + v 2 → 1 and K → 0 as φ → ∞, the constant on the right-hand side of (3.98) is equal to 1/2. Using (3.3) and (3.6), we rewrite (3.98) as 1 1 ∂θ 1 2τ e − eτ = . 2 α ∂φ 2
(3.100)
If we assume φ = 0 at the separation point then the free streamline solution (i.e. the solution for α = ∞) for the configuration of Figure 3.1 can be described near the separation point by θ ≈ θ0 − Cφ1/2
as
φ → 0,
(3.101)
where C is a constant. Here θ0 is the value of θ at the separation point when α = ∞. For example, for the flow of Figure 3.24, (3.93) shows that C = −π 1/2
and θ0 = −π/2.
(3.102)
Relation (3.101) implies that the curvature of the free surface near E behaves like ∂θ 1 ≈ Cφ−1/2 as φ → 0. (3.103) K = −eτ ∂φ 2 Therefore the curvature of the free surface is unbounded at the separation point E unless C = 0. Following Ackerberg [2] we introduce the following scaling of the variables: f ∗ = αf,
(3.104)
τ ∗ − iθ∗ = α1/2 (τ − iθ + iθ0 ).
(3.105)
The function τ ∗ satisfies Laplace’s equation in ψ ∗ < 0. Thus ∂2τ ∗ ∂2τ ∗ + = 0. ∂φ∗ 2 ∂ψ ∗ 2
(3.106)
3.2 The effects of surface tension
61
The kinematic and dynamic boundary conditions linearise in the limit α → ∞, so that the boundary conditions on ψ ∗ = 0 are ∂τ ∗ =0 ∂ψ ∗
on ψ ∗ = 0,
φ∗ < 0,
(3.107)
∂τ ∗ =0 ∂ψ ∗
on ψ ∗ = 0,
φ∗ > 0.
(3.108)
|f ∗ | → ∞,
(3.109)
Relation (3.101) gives the outer behaviour τ ∗ ≈ C(f ∗ )1/2
as
where indicates the imaginary part of a function. Cumberbatch and Norbury [39] showed that the solution of (3.106)–(3.108) not containing waves and having the weakest singularity at the separation point φ∗ = 0 is given on the free surface by 1 C θ∗ (φ∗ ) = Cπ 1/2 + 1/2 φ∗ ln φ∗ 2 2π τ ∗ (φ∗ ) =
1 C ln φ∗ 2π 1/2
as
as
φ∗ → 0,
φ∗ → 0.
(3.110)
(3.111)
The solution (3.110), (3.111) is not valid near φ∗ = 0 because τ ∗ is unbounded at φ∗ = 0 (an unbounded value of τ ∗ invalidates the linearisation). The asymptotic scheme can now be described as follows. For φ large we have an outer solution whose first term is the free streamline solution (i.e. the solution without surface tension). This solution merges with the solution (3.110), (3.111) obtained for φ∗ ≈ 1, i.e. for φ ≈ α−1 . Since the solution (3.110), (3.111) becomes invalid as φ∗ → 0, we follow Vanden-Broeck [159] and seek a local solution that corresponds to a flow past a corner of angle γ0 . Thus on the one hand, using (3.19) and (3.3), we can write π π/γ0 −1 φ , Aγ0
(3.112)
γ0 ln φ. τ ≈ 1− π
(3.113)
eτ = which implies that, near φ = 0,
On the other hand (3.105) and (3.111) give τ=
τ∗ 1 1 ≈ C ln φ. 1/2 2 (πα)1/2 α
(3.114)
62
Free-surface flows that intersect walls
A comparison of (3.113) and (3.114) yields C π 1/2 . γ0 = π − 2 α
(3.115)
Thus we have matched the solution (3.110), (3.111) with a local solution corresponding to a flow in a corner of angle γ0 (cf. Figure 3.6). The value of θ at the separation point is C π 1/2 . (3.116) θ = θ0 − 2 α If we denote by β the angle between the wall and the free surface at E (see Figure 3.24) then (3.116) implies that C π 1/2 . (3.117) β=− 2 α For the particular flow of Figure 3.24, (3.102) and (3.116) yield π as α → ∞. (3.118) β≈ 2α1/2 We now present fully nonlinear solutions for arbitrary values of α. The presence of surface tension changes drastically the dynamic boundary condition and invalidates the techniques used for streamline flows. Exact solutions can no longer be expected and fully nonlinear solutions have to be calculated numerically. There are, however, a few examples of exact solutions. Those will be considered in Section 6.5.1. We can calculate nonlinear solutions for the flow configuration of Figure 3.1 by modifying appropriately the series representation (3.35) to accommodate the singularity at t = −1. Using insight given by the asymptotic result (3.117), we assume that the flow near t = −1 is a flow in an angle π + β. Using (3.19) and (3.90) we obtain w ∼ f −β/π
φ→0
as
(3.119)
and w ∼ (t + 1)−2β/π
as
t → −1.
Therefore (γ2 −γ1 )/π γ1 /π
w = (t − d)
t
−2β/π
(t + 1)
∞
(3.120)
an tn
(3.121)
n=0
is the appropriate generalisation of (3.35) when surface tension is included. The asymptotic solution (3.117) for α large suggests that β should be found as part of the solution.
3.2 The effects of surface tension
63
We now present explicit calculations in the particular case γ1 = γ2 = π/2. In other words we consider the flow configuration of Figure 3.24. Then the expression (3.121) becomes w = t1/2 (t + 1)−2β/π
∞
an tn .
(3.122)
n=0
The dynamic boundary condition is given in dimensionless variables by (3.100), where α is defined in (3.99). We truncate the infinite series in (3.122) after N terms and calculate the coefficients an , n = 0, . . . , N − 1, and β by satisfying (3.100) at the N + 1 equally spaced mesh points 1 π I− , I = 1, . . . , N + 1. (3.123) σI = N +1 2 This leads to a system of N + 1 equations with N + 1 unknowns, which can be solved by Newton’s method. We present numerical results in terms of the parameter αv = 2α.
(3.124)
The factor 2 in (3.124) has been introduced so that αv coincides with the parameter α used by Vanden-Broeck [163]. Typical free-surface profiles are shown in Figure 3.25. For αv = ∞, the free-surface profile reduces to the free streamline solution of Figure 3.8. As αv → 0, the free-surface profile approaches the horizontal line y = 1 (i.e. the horizontal line through the stagnation point E). This is consistent with the fact that the dynamic boundary condition (3.100) predicts that the curvature of the free surface tends to zero as αv → 0 (the straight line y = 1 has zero curvature). Numerical values of β versus αv are shown in Figure 3.26. As αv varies from 0 to ∞, β varies continuously from π/2 to 0. For αv = ∞, the dynamic boundary condition (3.100) reduces to the free streamline condition u2 +v 2 = 1. The solution is then given by β = 0;
a0 = 1,
an = 0,
n = 1, 2, . . .
(3.125)
Subsituting (3.125) into (3.122) we obtain w∞ = t1/2 .
(3.126)
This is the free streamline solution (3.39). Here the subscript ∞ refers to the case αv = ∞.
64
Free-surface flows that intersect walls 1.7
1.6
1.5
1.4
1.3
1.2
1.1
1.0
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Fig. 3.25. Computed free-surface profiles for the flow configuration of Figure 3.24. The profiles from top to bottom correspond to αv = ∞, αv = 50, αv = 25, αv = 10 and αv = 5; αv is defined by (3.99) and (3.124). 1.6 1.4 1.2 1.0 0.8 0.6 0.4
0
5
10
15
20
Fig. 3.26. Values of the angle β between the free surface and the wall at the separation point E (see Figure 3.24) versus αv .
As αv → 0, the free surface approaches a horizontal straight line. The solution is then π (3.127) β = , a0 = 2; an = 0, n = 1, 2, . . . 2 Substituting (3.127) into (3.122) we obtain the following exact solution: w0 =
2t1/2 . t+1
(3.128)
3.2 The effects of surface tension
65
The subscript 0 refers to the case αv = 0. As in Section 3.1.1, we can define the contraction ratio Cc as the ratio of the ordinate of the free surface as x → ∞ and the ordinate of the separation point E. For αv = ∞, we have π . (3.129) Cc∞ = π+2 (see (3.42)–(3.44) for an explicit derivation). For αv = 0, the free surface is the horizontal line y = 1 and the ordinates of E and of the level of the free surface as x → ∞ are equal to 1. Therefore Cc0 = 1.
(3.130)
In Figure 3.27 we present numerical values of Cc versus αv . As αv decreases from infinity, the contraction ratio increases monotonically from Cc∞ to Cc0 . 1.0
0.9
0.8
0
5
10
15
20
Fig. 3.27. Values of the contraction ratio Cc versus αv for the flow configuration of Figure 3.24.
As αv → ∞, the values of β are described by the asymptotic formula (3.117). Combining (3.117) and (3.124) we obtain β≈
π (2αv )1/2
as αv → ∞.
(3.131)
The numerical values in Figure 3.26 are in good agreement with (3.131) for αv large. For αv = 20, the value of β predicted by (3.131) agrees with the numerical results within two per cent.
66
Free-surface flows that intersect walls
We can also construct a perturbation solution for αv small by writing τ = τ0 + αv τ1 + O(α2 ),
(3.132)
θ = θ0 + αv θ1 + O(α2 ).
(3.133)
Here τ0 and θ0 are defined by τ0 − iθ0 = ln w0 ,
(3.134)
where w0 is given by (3.128). Representing the free surface EF by (3.9), we find from (3.134) that σ (3.135) τ0 = − ln cos , θ0 = 0, 0 < σ < π, 2 on the free surface EF . Substituting (3.132) and (3.133) into (3.100) and equating coefficients of αv , we obtain ∂θ1 1 sin2 (σ/2) = . ∂φ 2 cos(σ/2)
(3.136)
Using (3.10) and the chain rule we can rewrite (3.136) as dθ1 1 σ = − sin . dσ 2π 2
(3.137)
Integrating (3.137) and using the condition θ1 = 0 at σ = 0, we obtain σ 1 cos − 1 . (3.138) θ1 = π 2 In particular, (3.138) implies that θ1 = −
1 π
at
σ = π.
Combining (3.117), (3.133) and (3.139) we obtain π αv as αv → 0. β= − 2 2π
(3.139)
(3.140)
For αv = 1, the value of β predicted by (3.140) agrees with the numerical results within two per cent.
3.2.2 Free separation The behaviour (3.103) occurs for all free streamline problems near the intersection of a free surface with a rigid wall. The constant C depends on the geometry of the problem. When C < 0, as in the flow of Figure 3.24, the asymptotic analysis of Section 3.2.1 for α large shows that there is locally
3.2 The effects of surface tension
67
a flow around a corner near the separation point E. The velocity at the separation point E is then infinite. An interesting question is whether there are free streamline flows for which C ≥ 0. Of particular interest are flows for which C = 0 and therefore for which the singular behaviour (3.103) disappears. For C > 0, the asymptotic analysis of the previous section suggests that, when surface tension is included, the flow near the separation point is a flow inside an angle with a stagnation point at the separation. In this section we will show that there are free streamline flows with C ≥ 0 when the rigid boundaries are curved. The consideration of such flows will enable us to introduce the concept of selection, which will be very useful when we are studying gravity–capillary flows. We consider the open-cavity model of Figure 3.16 but now with the effect of the surface tension T included in the dynamic boundary condition. Proceeding as in Section 3.1.2 we seek τ − iθ as an analytic function of φ + iψ in the lower half-plane, ψ < 0, of the domain shown in Figure 3.17. This function must satisfy (3.50), (3.51) and α eτ ∂θ = (e2τ − 1) b ∂φ 2
on ψ = 0,
1 < φ < ∞.
(3.141)
Here α is defined by α=
ρU 2 R . T
(3.142)
We start our investigation by reconsidering the solutions of Section 3.1.2 and by calculating the curvature KA of the free surface at the separation point A. Using (3.49) and (3.62), we find that KA = −
1 1 ∂θ ≈ C(bφ − b)−1/2 b ∂φ 2
as
φ → 1,
(3.143)
where C = −b−1/2 − b−1/2
∞
(−1)n+1 (2n − 1)An .
(3.144)
n=1
Since the An are functions of γ, (3.144) defines C as a function of γ¯ . A graph of C versus the angular position γ¯ of the separation points is shown in Figure 3.28. If the angle β is counted positive when shown as in Figure 3.16, a comparison of Figures 3.24 and 3.16 shows that (3.117) implies that C π 1/2 . (3.145) β= 2 α In other words β has opposite signs in Figures 3.16 and 3.24.
This
68
Free-surface flows that intersect walls
difference in sign has been maintained to be consistent with previously published results. 1.5 1.0 0.5 0
20
40
60
80
100
120
140
Fig. 3.28. Values of the constant C versus γ¯ .
The constant C vanishes when γ¯ = γ ∗ ≈ 55◦ (see Figure 3.28). Thus (3.143) shows that the curvature of the free surface at the separation points is infinite unless γ¯ = γ ∗ . For γ¯ > γ ∗ , Figure 3.28 shows that C > 0 and (3.145) predicts β > 0. The flow near B in Figure 3.16 is a flow inside an angle with zero velocity at B. For γ¯ < γ ∗ , Figure 3.28 shows that C < 0 and the values of β predicted by (3.145) are then negative. The flow near B is then a flow around a corner with infinite velocity at B. These results are only valid for α large. As α → 0, (3.141) shows that the curvature of the free surfaces tends to zero. Since the flows are characterised by a constant velocity at infinity, the free surfaces must approach two horizontal straight lines. Therefore β → γ¯ −
π 2
as α → 0.
(3.146)
Relation (3.146) shows that β < 0 in the limit α → 0 when γ¯ < π/2. Relation (3.145) shows that β > 0 in the limit α → ∞ when γ¯ > γ ∗ . If we assume that, for a given value of γ¯ , β is a continuous function of α then there must exist for each value of α a particular value of γ ∗ < γ¯ < π/2 for which β = 0 (i.e. for which the flow leaves the circle tangentially). We describe these particular values of γ¯ by the function γ¯ = g(α).
(3.147)
This conjecture is confirmed by the nonlinear computations below.
In
3.2 The effects of surface tension
69
particular these results show that g(α) → γ ∗
as
α → ∞.
(3.148)
This implies that the limit T → 0 can be used to select a particular solution with T = 0. In Section 3.1.2 we calculated solutions for T = 0. Then the dynamic boundary condition implies β = 0. We obtained solutions for all values of γ¯ . When T = 0, solutions with β = 0 exist only for values of γ¯ satisfying (3.147). Taking the limit α → ∞, (3.148) shows that we should select the solution corresponding to γ¯ = γ ∗ , which is known as the one satisfying the Brillouin–Villat condition (see [22], [194], [19] and [69]). This condition was introduced to select the position of the separation points in the case of free separation without surface tension. It requires the pressure to be minimal in the cavity. By Bernoulli’s equation (3.1), this is equivalent to the condition that the velocity is a maximum on the free streamlines. For the configuration of Figure 3.16, the Brillouin–Villat condition yields γ¯ = γ ∗ . The above analysis shows that the selection mechanism based on the limit T → 0 provides a new physical interpretation of the Brillouin–Villat condition. We will now solve the problem numerically, calculate g(α) and demonstrate (3.148). We first map the flow of Figure 3.16 into the unit circle in the t-plane by the transformation t=
1 + if 1/2 . 1 − if 1/2
(3.149)
The flow configuration in the t-plane is shown in Figure 3.29. A
D E
C
Fig. 3.29. The flow configuration of Figure 3.16 in the t-plane defined by (3.149).
Next we note that the flow near A is locally a flow inside a corner with angle π − β and that the flow near C is a flow inside a right-angle corner (see Figure 3.16). Therefore, using (3.149), we obtain u − iv ∼ (t − i)β/π
as t → i,
(3.150)
70
Free-surface flows that intersect walls
u − iv ∼ t − 1
as
t → 1.
(3.151)
Following the series truncation method of Section 3.1.2, we represent the complex velocity by u − iv = eτ −iθ = (1 − t)(1 + t2 )β/π
∞
an tn .
(3.152)
n=0
The multiplicative factors in front of the series in (3.152) remove the singularity (3.150). Therefore we can expect the series in (3.152) to converge in the unit circle of the t-plane. If we describe points on the unit circle by t = eiσ , 0 < σ < π, we can rewrite (3.141) and (3.51) as −
eτ cos3 (σ/2) dθ α = (e2τ − 1), b sin(σ/2) dσ 2 eτ cos3 (σ/2) dθ = 1, b sin(σ/2) dσ
π < σ < π, 2
0<σ<
π . 2
(3.153)
(3.154)
Coefficients an in (3.152) are found such that (3.153) and (3.154) are satisfied. This is achieved by series truncation as in Section 3.1.2. We truncate the infinite series in (3.152) after N terms and find the N coefficients a0 , a1 , . . . , aN −1 , the constant b and the angle β by collocation. Thus we introduce the N mesh points 1 π , I = 1, . . . , N. (3.155) σI = I − 2 N In order to avoid the value σ = π/2 at which the expression (3.152) is singular, we choose N to be even. Using (3.152) and (3.155) we obtain ˜ τ˜(σ) and θ(σ) at the points σI in terms of the coefficients an . Substituting these expressions into (3.153) and (3.154) we obtain N equations. An extra equation is obtained by requiring the velocity to be unity at infinity. This leads to τ˜(π) = 0.
(3.156)
The last equation relates γ and the angle θ at the separation point: π ˜ + β. (3.157) γ¯ − [θ(σ)] σ=π/2 = 2 This system of N + 1 equations with N + 1 unknowns can be solved by Newton’s method. We used this numerical scheme to compute solutions for various values of α and γ¯ . The coefficients an were found to decrease rapidly as n increases. For example, for γ¯ = 30◦ and α = 10, a1 ≈ 0.6,
3.2 The effects of surface tension
71
a10 ≈ −0.3×10−2 and a40 ≈ 0.3×10−3 . In Figure 3.30 we present numerical values of β/π versus γ¯ for α = 1. 0.10
0.05
0
60
70
80
90
100
Fig. 3.30. Values of β/π versus γ¯ (in degrees) for α = 1.
The curve in Figure 3.30 shows that for α = 1 there is exactly one value of γ¯ at which β = 0. Similar results were found for other values of α (see [176] and [183]). As α → 0, the free surfaces in figure 3.16 approach two horizontal lines. Therefore the curve corresponding to α = 0 in Figure 3.30 is the straight line (not shown in the figure) of equation β = γ¯ −
π . 2
(3.158)
For α = ∞, the angle β is equal to zero for all values of γ¯ and the curve corresponding to α = ∞ in Figure 3.30 is the horizontal line β = 0 (not shown). These results imply that, for each value of α = ∞, there is a particular value γ˜ for which β = 0 (i.e. for which the free surface leaves the obstacle tangentially). We denote these particular values of γ¯ by the function (3.147). In Figure 3.31 we present computed values of γ¯ = g(α) versus α−1 . As α → 0, γ˜ → 90◦ . As α → ∞, γ˜ → γ ∗ . Therefore the particular solution that satisfies the Brillouin–Villat condition in the absence of surface tension can be viewed as the limit of the family of solutions in Figure 3.31 as the surface tension approaches zero. So far we have mainly considered solutions with β = 0. It is of interest to look at solutions with β = 0. The angle β can then be interpreted as a contact angle whose value depends on the properties of the fluid and of the rigid boundary. In Figure 3.32 we present values of γ¯ versus α−1 for β = 0.04π.
72
Free-surface flows that intersect walls 80
70
60
50
0
0.2
0.4
0.6
0.8
1.0
Fig. 3.31. Values of γ˜ versus α−1 . The corresponding free-surface profiles leave the circular object tangentially, i.e. β = 0. 98 96 94 92 90 88 86 84 82 80
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
Fig. 3.32. Values of γ¯ versus α−1 for β = 0.04π.
This curve can be viewed as the equivalent of the curve (3.147) but with β = 0.04π instead of β = 0. One interesting property to note in Figure 3.32 is that now γ¯ is not a monotonic function of α−1 . However, only one value of γ¯ corresponds to each value of the surface tension (i.e. α−1 ). For α−1 small, γ¯ increases rapidly. This behaviour can be described by substituting β = 0.04π into (3.145) and noting that α 1/2 . (3.159) C = 2(0.04π) π
3.3 The effects of gravity
73
Together with Figure 3.28, this predicts that γ¯ increases as α−1 decreases, for α large.
3.3 The effects of gravity In this section we study solutions for the flow configuration of Figure 3.1 with surface tension neglected but with gravity included in the dynamic boundary condition. We assume that gravity acts in the direction defined by the angle β1 (see Figure 3.33) and write the dynamic boundary condition as 1 2 (u + v 2 ) + gy sin β1 − gx cos β1 = B, (3.160) 2 where B is the Bernoulli constant. In this section we will look for solutions without waves on EF . Solutions with waves on EF will be studied in Chapter 8. C β1
D
g
E y A
F x
B
Fig. 3.33. The flow configuration of Figure 3.1 with the effects of gravity included.
Two situations of particular interest are β1 = π/2 and β1 = 0. When β1 = π/2, gravity is acting in the negative y-direction. One interpretation of the flow of Figure 3.33 is then the flow emerging from a container with gravity included. Another is the flow under a sluice gate, a classical topic in hydraulics (see [11], [54], Larock [93], Chung [30], Vanden-Broeck [181] and Binder and Vanden-Broeck [15], [16]). There are now two free surfaces CD and EF (see Figure 3.34). The model consists of replacing the upper free surface CD by a rigid lid (see Figure 3.35). The configuration of Figure 3.35 is that of Figure 3.33 with γ1 = 0. An accurate numerical study of the complete free-surface flow of Figure 3.34 is presented in Section 8.3.
74
Free-surface flows that intersect walls D C
g
γ2
E F A
B
Fig. 3.34. A free-surface flow under a sluice gate. D
C
g
γ2
E F A
B
Fig. 3.35. A model for the flow under a sluice gate, in which the free surface CD has been replaced by a rigid lid.
When β1 = 0, gravity is acting in the positive x-direction. A realistic view of the flow is obtained by rotating Figure 3.33 by 90◦ clockwise. If the flow is then reflected in the wall AB, the result corresponds to a jet falling from a nozzle (see Figure 3.36). In Figures 3.33 and 3.36 we have assumed that the free surface EF leaves the wall DE tangentially. As we shall see, there are in addition solutions for which EF does not leave the wall DE tangentially. There is then an angle µ between the wall DE and the free surface EF at the separation point E (see Figure 3.37). There are only three possible values for µ. One of them is µ = π; it corresponds to the case already mentioned where the free surface leaves the wall tangentially. The existence of these three values of µ is to be contrasted with the problems including surface tension discussed in Section 3.2, where all values of µ were in principle possible, and with the free streamline problems in Section 3.1, where only the value µ = π was acceptable. The existence of the two values of µ = π can be established by deriving a local solution valid in the neighbourhood of the separation point E. The
3.3 The effects of gravity A
75
C
g
γ2
D
E
B
F
Fig. 3.36. The free-surface flow emerging from a nozzle. This is the flow configuration of Figure 3.33 rotated by 90◦ and reflected in the wall AB. Here γ1 = 0 and β1 = 0. C γ1
β1
D
g
γ2
µ
E F
y A
x
B
Fig. 3.37. The flow of Figure 3.33 with an angle µ between the free surface and the wall at the separation point E.
analysis follows the work of Dagan and Tulin [40]. We define new local coordinates x and y with the origin at the separation point and such that gravity is acting in the negative y-direction. The local flow is illustrated in Figure 3.38. Here the separation point is denoted by G, the wall by HG and the free surface by GL. It can easily be seen that the flow of Figure 3.38 describes the flow near E in Figure 3.37 if µ2 =
π − β1 + γ2 . 2
(3.161)
76
Free-surface flows that intersect walls
If µ = π, the free surface LG leaves the wall HG tangentially and the velocity at G is finite and different from zero. If µ < π, the flow is locally a flow inside a corner and the velocity at G is zero (i.e. G is a stagnation point). If µ > π, the flow is locally a flow around a corner and the velocity at G is infinite (see Figure 3.6 and (3.19)). Therefore values of µ > π are not possible, since (3.160) requires the velocity at G to be finite. H y
µ2
g
G
µ
x
L
Fig. 3.38. Local-gravity free-surface flow near the intersection of a wall HG with a free surface GL.
We shall now determine the allowed values of µ when µ < π. We define a potential function φ and a streamfunction ψ and choose φ = ψ = 0 at the point G. The complex potential plane is shown in Figure 3.39. ψ
H
G
L
φ
Fig. 3.39. The flow of Figure 3.38 in the complex potential plane. The flow domain is ψ < 0.
Using (3.17) we express the local solution in the form z = Af µ/π .
(3.162)
We write the complex constant A as A = aeiα ,
(3.163)
3.3 The effects of gravity
77
where a and α are real and α is such that the kinematic boundary condition on the wall HG is satisfied. On the wall HG, arg z = π − µ2 . However, the argument of (3.162) evaluated on ψ = 0, φ < 0, gives arg z = −µ + α. Equating the two expressions for arg z gives α = π + µ − µ2 .
(3.164)
Substituting (3.163) and (3.164) into (3.162) yields z = af µ/π ei(π+µ−µ2 ) .
(3.165)
Before satisfying the dynamic boundary condition we need to improve the local solution (3.165) by writing explicitly the next-order correction: z = af µ/π ei(π+µ−µ2 ) + bf ν eiδ + · · ·
(3.166)
Here ν, b and δ are real constants. The second term in (3.166) takes into account the deviation of the free surface from the straight line GL as φ increases. Since we require the second term in (3.166) to be a small correction to (3.165) in the limit f → 0, we impose ν>
µ . π
(3.167)
Taking the real and imaginary parts of (3.166) on ψ = 0, φ > 0, we obtain x = aφµ/π cos(π + µ − µ2 ) + bφν cos δ + · · · ,
(3.168)
y = aφµ/π sin(π + µ − µ2 ) + bφν sin δ + · · · .
(3.169)
Differentiating (3.168) and (3.169) with respect to φ yields aµ 2 aµ φ2µ/π−2 + 2 bνφµ/π+ν−2 x2φ + yφ2 = π π × cos(π + µ − µ2 − δ) + b2 ν 2 φ2ν−2 + · · · .
(3.170)
Since 2µ µ − 2 < + ν − 2 < 2ν − 2, π π
(3.171)
the last term in (3.170) is of lower order and can be neglected. We can rewrite (3.170) as aµ 2 2π 2 2 2µ/π−2 ν−µ/π φ cos(π + µ − µ2 − δ) + · · · 1+ bνφ xφ + yφ = π aµ (3.172)
78
Free-surface flows that intersect walls
and express u2 + v 2 in the limit f → 0 as u2 + v 2 = =
π aµ
2
x2φ
1 + yφ2
2π bνφν−µ/π cos(π + µ − µ2 + δ) + · · · . φ2−2µ/π 1 − aµ
(3.173)
We now substitute (3.169) and (3.173) into the dynamic boundary condition (3.160). First we note that β1 = π/2 since g is acting in the negative y-direction in Figure 3.38 and that B = 0 since u = v = 0 at the point G. This gives 1 π 2 2−2µ/π φ + gaφµ/π sin(π + µ − µ2 ) + gbφν sin δ + · · · = 0. (3.174) 2 aµ We then equate the coefficients of the leading-order terms in (3.174). If π + µ − µ2 = π then the first and second terms in (3.174) give 2µ µ =2− π π and
or
µ=
2π 3
1 π2 1 a= 2 µ2 g sin(µ2 − µ − π)
(3.175)
1/3 .
(3.176)
Since µ = 2π/3, we require −π/3 < µ2 < 2π/3, for otherwise the free surface in Figure 3.38 would descend towards the stagnation point G and this would be in contradiction with the dynamic boundary condition (3.160) with β1 = π/2, which implies that a stagnation point on a free surface is the highest point on it. In the remaining part of this chapter we will assume µ2 > 0; however, solutions with µ2 < 0 will be considered in Chapter 8 (see Figure 8.5, where γ3 = −µ2 ). Furthermore, the solution with µ2 = −π/6 will be used in Section 6.5.2 to describe the singularity near the crests of the highest gravity waves. If π + µ − µ2 = π
or
µ = µ2 ,
(3.177)
the second term in (3.174) vanishes and the balance of the remaining terms gives 2µ . (3.178) ν =2− π The conditions (3.167), (3.177) and (3.178) yield µ = µ2 <
2π . 3
(3.179)
3.3 The effects of gravity
79
The condition (3.177) implies that the free surface LG is horizontal. In summary we have the following possibilities. If µ2 ≤ 2π/3, there are three possible values for µ: π, 2π/3 and µ2 . However, if µ2 ≥ 2π/3 then the only possible value for µ is π. We note that on the one hand the solution (3.162) with µ = 2π/3 and A defined by (3.163), (3.164) and (3.176) is an exact solution for the flow configuration of Figure 3.38 for all values of z inside the angle HGL. On the other hand the solution (3.162) with µ = µ2 is only a local solution in the limit z → 0. We shall solve the flow problem of Figure 3.37 numerically by using a series truncation method similar to that used in Section 3.2. All the solutions constructed in this section are waveless as x → ∞. Solutions with waves as x → ∞ will be computed in Chapter 8. The flow configuration in the complex potential plane is shown in Figure 3.4. As in Section 3.1.1, we map the complex potential plane onto the inside of the unit circle in the t-plane by using the transformation (3.8). The flow configuration in the t-plane is illustrated in Figure 3.5. Next we represent the complex velocity w = u − iv by the expansion (3.12) where G(t) contains all the singularities of w in |t| ≤ 1. In this case there are two singularities: one is at the separation point E and the other at t = 1 (i.e. as x → ∞). The former corresponds to a flow inside an angle µ (see Figure 3.37) and is described by w ≈ f 1−µ/π
f →0
as
(3.180)
(see (3.19)). Using (3.8) we have w ≈ (1 + t)2−2µ/π
as
t → −1.
(3.181)
The singularity at t = 1 depends on the value of β1 . It can be seen from (3.160) that u2 + v 2 ≈ 2gx cos β1
as
x→∞
when
β1 = π/2
(3.182)
as
x → ∞ when
β1 = π/2.
(3.183)
and that u2 + v 2 ≈ constant
In (3.183) we have used the fact that there are no waves as x → ∞. We first examine the case β = π/2 (see Figure 3.37). Relation (3.182) shows that u2 + v 2 → ∞ as x → ∞. Since the flux between the free surface EF and the wall AB is finite (and equal to Q), it follows by conservation of mass that the free surface approaches the wall asymptotically as x → ∞.
80
Free-surface flows that intersect walls
In other words the flow reduces to an arbitrarily thin jet in the x-direction as x → ∞. Therefore u v as x → ∞, and (3.182) implies that u ≈ (2gx cos β1 )1/2 .
(3.184)
If we denote by y = η(x) the equation of the free surface then from the conservation of mass we have as x → ∞ uη(x) = Q.
(3.185)
Combining (3.184) and (3.185) we have η(x) ≈ Q(2gx cos β)−1/2 .
(3.186)
Writing successively φx and ψy for u in (3.184) gives ∂φ = (2gx cos β)1/2 , ∂x
(3.187)
∂ψ = (2gx cos β)1/2 . ∂y
(3.188)
Integrating (3.187) with respect to x and (3.188) with respect to y gives expressions for φ and ψ. Combining them gives 1/2 2 3/2 1/2 (3.189) x + ix y . f = φ + iψ = (2g cos β1 ) 3 We note that, for x large, 3x1/2 y iy 3/2 3y 3/2 3/2 3/2 =x ≈x 1+ 1+i = x3/2 + i . z x 2x 2
(3.190)
Combining (3.189) and (3.190) gives f ∼ z 3/2
or
z ∼ f 2/3 .
(3.191)
Differentiating (3.191) with respect to z and eliminating z by using the second of the relations (3.191) yields df = u − iv ∼ z 1/2 ∼ f 1/3 . dz
(3.192)
Next we examine the case β1 = π/2 (see Figure 3.37). Then the flow approaches a uniform stream with constant velocity U and constant depth H as x → ∞ (see (3.183)). The exact equations that describe the flow as
3.3 The effects of gravity
81
x → ∞ are, in dimensional variables, φxx + φyy = 0, 2 1 2 (φx
+
φ2y )
+ gy =
0 < y < H + η(x),
(3.193)
φy = φx ηx
on
y = H + η(x),
(3.194)
1 2 2U
on
y = H + η(x),
(3.195)
+ gH
φy = 0
on y = 0.
(3.196)
Here y = H + η(x) is the equation of the free surface. Equations (3.194) and (3.196) are the kinematic boundary conditions on the free surface and on the bottom, and equation (3.195) is the dynamic boundary condition on the free surface. We write w =U +w ˜ + ··· ,
(3.197)
φ = U x + φ˜ + · · · ,
(3.198)
η = η˜ + · · · ,
(3.199)
where w, ˜ φ˜ and η˜ are assumed to be small perturbations. We have assumed as before that the flow approaches a uniform stream as x → ∞. Substituting (3.197)–(3.199) into (3.193)–(3.196) and linearising yields φ˜xx + φ˜yy = 0, U η˜x = φ˜y
on
y = H,
U φ˜x + g η˜ = 0 on y = H, φ˜y = 0
on y = 0.
(3.200) (3.201) (3.202) (3.203)
Eliminating η between (3.201) and (3.202) gives U φ˜xx +
g ˜ φy = 0 U
on y = H.
(3.204)
We use separation of variables, to find a solution of (3.200) in the form ˜ y) = X(x)Y (y). φ(x,
(3.205)
Substituting (3.205) in (3.200) and in (3.203) yields the ordinary differential equations X (x) Y (y) =− =µ ˜2 X(x) Y (y)
(3.206)
82
Free-surface flows that intersect walls
and the boundary condition Y (0) = 0.
(3.207)
Here µ ˜2 is the separation constant. The solutions of the two differential equations (3.206) satisfying (3.207) are X(x) = Be−˜µx + Ceµ˜ x ,
(3.208)
Y (y) = D cos µ ˜y,
(3.209)
where B, C and D are constants. We set C = 0, so that φ˜ remains bounded as x → ∞. Multiplying (3.208) and (3.209) yields the solution φ˜ = Ae−¯µx cos µ ¯y,
(3.210)
where A = DB is a constant. Substituting (3.210) into (3.204) yields µ ¯H =
1 tan µ ¯H, F2
(3.211)
U (gH)1/2
(3.212)
where F =
is the Froude number. We note that the derivation leading to (3.210) is similar to that leading to (2.74) and (2.75) in the theory of linear waves. The main difference is that we chose a negative separation constant in (2.72) whereas we have chosen a positive one in (3.206). Substituting (3.210) into (3.198) and differentiating with respect to x gives w=
∂φ ∂φ −i = U − A¯ µe−¯µz . ∂x ∂y
(3.213)
Next we rewrite (3.213) in terms of t. Using (3.8) we obtain, as x → ∞ or equivalently as t → 1, e−f ≈ (1 − t)2/π
as
t → 1.
(3.214)
Combining (3.213) and (3.214) and using dimensionless variables, i.e. setting U = 1 and H = 1, we have w ≈ 1 − A¯ µ(1 − t)2µ¯ /π
as t → 1.
(3.215)
Similarly (3.211) gives in dimensionless variables µ ¯=
1 tan µ ¯. F2
(3.216)
3.3 The effects of gravity
83
Relations (3.215) and (3.216) define the singular behaviour of w as t → 1 for β1 = π/2. Finally we use (3.214) to rewrite (3.192) as w ≈ [−ln(1 − t)]1/3
as
t → 1.
(3.217)
This demonstrates the singular behaviour of w as t → 1 when β = π/2. 3.3.1 Solutions with β1 = 0 (funnels) We first consider the configuration of Figure 3.37 with β1 = 0. Following the approach of Sections 3.1.1 and 3.2, we find that the complex velocity w can be represented by the expression t − d (γ2 −γ1 )/π γ1 /π [− ln Cp (1 − t)]1/3 ¯ (3.218) t (1 + t)2−2µ/π G(t), w= 1 − td (− ln Cp )1/3 where t is defined by (3.8). Here Cp is an arbitrary constant. The vari¯ ous factors appearing in the numerator of the expression multiplying G(t) remove the singularities in w at t = 0 (see (3.33)), t = 1 (see (3.217)), t = d (see (3.27)) and t = −1 (see (3.181)). The factors appearing in ¯ the denominator of the expression multiplying G(t) are not essential and the computations could have been performed without them. The function ¯ G(t) in (3.218) is then free of singularities and can be written as the Taylor expansion ∞ ¯ an tn . (3.219) G(t) = n=0
¯ There are of course alternative representations for G(t). For example we ¯ shall see in Section 3.3.2 that another convenient representation for G(t) is
∞ ¯ = exp (3.220) an tn G(t) n=0
(see also (3.60)). We choose 0 < Cp < 0.5 in (3.218), so that [− ln Cp (1 − t)]1/3 is real for −1 < t < 1. Then it can be easily checked that the kinematic boundary conditions on the walls CD, DE and AB are automatically satisfied by assuming that the coefficients an in (3.219) are real. For the computation presented we chose Cp = 0.2. We note that different values of Cp and ¯ different choices for G(t) (see (3.219) or (3.220)) will yield different values
84
Free-surface flows that intersect walls
for the coefficients an . However these various series representations yield the same values of w provided that, all the singularities in the unit circle of the complex t-plane have been properly removed. We present explicit solutions for γ1 = γ2 = 0 (the analysis follows Lee and Vanden-Broeck [94]). After reflection in the wall AB, this models a jet of fluid emerging from a funnel (see Figure 3.40). A
γ2
µ
y
E
x
B
C
F
Fig. 3.40. A free-surface flow emerging from a funnel. Gravity is acting vertically downwards. This flow can be obtained by rotating the flow of Figure 3.33 by 90◦ and reflecting it in the wall AB.
The expression (3.218) reduces to w = tγ2 /π
[− ln Cp (1 − t)]1/3 ¯ (1 + t)2−2µ/π G(t), (− ln Cp )1/3
(3.221)
¯ where G(t) is defined by (3.219). The dynamic boundary condition (3.160) with β1 = 0 gives 1 2 2 (u
+ v 2 ) − gx = B.
(3.222)
We define dimensionless variables by using (Q2 /g)1/3 as the unit length and (Qg)1/3 as the unit velocity; here Q is the value of ψ on the streamline CEF. This scaling is different from that used in Sections 3.1.1 and 3.2 since the velocity tends to infinity as x → ∞ instead of approaching a constant U . In dimensionless variables (3.222) becomes 1 2 2 (u
+ v 2 ) − x = B.
(3.223)
The flow domain in the f = (φ + iψ)-plane is, as before, the strip 0 < ψ < 1 (see Figure 3.4). Here the point D is irrelevant since γ1 = γ2 .
3.3 The effects of gravity
85
We will find the coefficients an by truncating the series in (3.221) and satisfying (3.223) at suitably chosen collocation points. Therefore we need to express x in (3.223) in terms of w = u−iv. This is achieved by differentiating (3.223) with respect to σ and using (3.10) and (3.38); σ is defined in (3.9). Then the chain rule gives uuσ + vvσ +
u 1 σ = 0. cotan 2 π 2 u + v2
(3.224)
The local analysis near E described at the beginning of this chapter shows that there are three possible values of µ: π, 2π/3 and π/2 + γ2 . Numerical experimentation shows that, for a given value of γ1 = γ2 , the solutions corresponding to µ = π and µ = π/2 + γ2 form a one-parameter family of solutions whereas there is only one solution corresponding to µ = 2π/3. A convenient choice for the parameter is ¯ = 1 , H W
(3.225)
where W is the dimensionless distance between the separation point E and the wall AB. Therefore ¯ = 1 , (3.226) H y(π) where y(π) denotes the value of y at σ = π. For µ = π and µ = π/2 + γ2 , we truncate the infinite series within (3.221) after N terms and satisfy (3.224) at the N − 1 collocation points π 1 σI = I− , I = 1, 2, . . . , N − 1. (3.227) 2(N − 1) 2 ¯ is given. The An extra equation is obtained by satisfying (3.226), where H value of y(π) in (3.226) is obtained by integrating numerically the identity (3.38), where w is defined by (3.221). This gives a system of N algebraic equations for the N unknowns a0 , a1 , . . . , aN −1 . This system is solved by Newton’s method. For β = 2π/3, there is one fewer equation since now we do not have to satisfy (3.226). Therefore again we truncate the infinite series within (3.221) after N terms but satisfy (3.224) at the N collocation points 1 1 I− , I = 1, 2, . . . , N. (3.228) σI = 2N 2 As before, this gives a system of N nonlinear algebraic equations that can be
86
Free-surface flows that intersect walls
solved by Newton’s method. We find that there are solutions for all values ¯ > 0. Different behaviours are found for γ2 > π/6 and γ2 < π/6. of H • For γ2 < π/6, there is a solution with µ = 2π/3 for a particular value, say ¯ Solutions with µ = π and µ = π/2 + γ2 occur for H ¯ >H ¯ c and ¯ c , of H. H ¯ ¯ H < Hc respectively. Therefore µ=π
µ=
µ=
¯ >H ¯c, when H
2π 3
π + γ2 2
¯ =H ¯c, when H
when
¯
(3.229)
(3.230)
(3.231)
The solutions corresponding to (3.229) and (3.231) approach the solution ¯ approaches H ¯ c from above and from below corresponding to (3.230) as H ¯ respectively. The value of Hc depends on the value of γ2 . ¯ > 0 are characterised by µ = π. This • For γ2 > π/6, all solutions with H is consistent with the fact that the local analysis (see Figure 3.38) shows that there are no solutions with µ = 2π/3 or µ = π/2 + γ2 when γ2 > π/6. These results are illustrated in Figure 3.41, where we plot values of ¯ for various values the velocity qE at the separation point E versus H of γ2 . The solutions with µ = 2π/3 and µ = π/2 + γ2 have stagnation point at E and are therefore characterised by qE = 0. For γ2 ≥ π/6, ¯ > 0 and qE → 0 as H ¯ → 0. For γ < π/6, qE → 0 as qE = 0 for all H ¯ ¯ ¯ ¯ H → Hc and qE = 0 for H < Hc . Therefore the curves corresponding to ¯ → 0, whereas the curve correγ2 = π/4 and γ2 = π/6 approach 0 as H ¯ =H ¯c ≈ sponding to γ2 = π/12 intersects the horizontal axis at the value H 0.528. Typical free-surface profiles are shown in Figures 3.42–3.45. The three profiles of Figures 3.42–3.44 are for γ2 = π/12. Figure 3.42 ¯ = 0.81, i.e. the case (3.229). The free surface leaves the corresponds to H wall tangentially. Both the free surface and the wall position can be seen in the figure (the separation point E corresponds to the point on the curve with ordinate y = 0). ¯ =H ¯ c ≈ 0.528 (case (3.230)). There is Figure 3.43 shows the profile for H a 2π/3 angle between the free surface and the wall at the separation point.
3.3 The effects of gravity
87
1.0
0.8
0.6
0.4
0.2
0
0
0.2
0.4
0.6
0.8
1.0
Fig. 3.41. Values of the dimensionless velocity qE at the separation point E versus ¯ (see (3.225)). The values of γ2 corresponding to the curves from left to right are H π/4, π/6 and π/12.
¯ = 0.25. Since H ¯
1
0
1
2
3
4
5
6
Fig. 3.42. A free-surface profile EF of Figure 3.40 for γ2 = π/12. The ordinate of the separation point is zero. The dimensionless velocity qE at the separation point is 0.5. The free surface leaves the wall tangentially and µ = π.
88
Free-surface flows that intersect walls 1
0
1
2
3
4
5
6
Fig. 3.43. A free-surface profile EF of Figure 3.40 for γ2 = π/12. The ordinate of ¯ =H ¯c ≈ the separation point is zero. This profile corresponds to µ = 2π/3 and H 0.528.
1
0
0
1
2
3
4
5
6
¯ = 0.25. Fig. 3.44. A free-surface profile EF of Figure 3.40 for γ2 = π/12 and H The ordinate of the separation point is zero. The free surface is horizontal at the separation point.
3.3.2 Solutions with β1 = 0 (nozzles and bubbles) Next we present computations for γ1 = γ2 = 0 (see Figure 3.46). This configuration differs from that of Figure 3.40 because the flow approaches a uniform stream with constant velocity U as x → −∞ instead of approaching a zero velocity. This problem was considered by many investigators (see [18], [62], [63], [165], [166], [169] and others). The study presented below follows Vanden-Broeck [165], [166] and [169]. We will describe the problem by reverting to dimensionless variables in which the unit length is H = Q/U and the unit velocity is U . Then the
3.3 The effects of gravity
89
1
0
1
2
3
4
5
Fig. 3.45. A free-surface profile EF of Figure 3.40 for γ2 = π/6. The ordinate of the separation point is zero. The dimensionless velocity qE at the separation point is 0.5. The free surface leaves the wall tangentially. C
A
µ y
x
B
E
F
Fig. 3.46. The free-surface flow from a nozzle.
dynamic boundary condition (3.160) becomes, in dimensionless variables, u2 + v 2 −
1 x = B, F2
(3.232)
where F is the Froude number defined by F =
U . (2gH)1/2
(3.233)
90
Free-surface flows that intersect walls
¯ in (3.225) by We note that F is related to H ¯ 3 1/2 H . F = 2
(3.234)
The factor 21/2 in (3.233) was introduced for consistency with previous calculations. Similarly (3.224) becomes 2uuσ + 2vvσ +
u 1 σ cotan = 0. 2 2 πF 2 u + v2
(3.235)
The flow of Figure 3.46 has interesting applications. First, it clearly models a jet emerging from a nozzle. Second, it models a bubble rising in a tube when viewed in a frame of reference moving with the bubble (see Figure 3.47). This follows from the symmetry of the flow: the portion EF of the bubble surface in Figure 3.47 is identical, for the same value of the Froude number F , to the portion EF of the jet surface in Figure 3.46. A
C
y
E x B
F
Fig. 3.47. A ‘bubble’ rising in a tube, viewed in a frame of reference moving with the bubble. Physical bubbles are characterised by a continuous slope at the apex.
Returning to our calculation, we represent the complex velocity w by the expansion w=
[− ln Cp (1 − t)]1/3 ¯ (1 + t)2−2µ/π G(t). 1/3 (− ln Cp )
(3.236)
¯ by (3.220) instead of (3.219). Therefore we In this section we represent G(t) write
∞ n ¯ = exp (3.237) an t , G(t) n=1
where we have set a0 = 0 so that w = 1 at t = 0.
3.3 The effects of gravity
91
As for the solutions with γ1 = γ2 = 0 of Section 3.3.1, there are solutions with µ = π, µ = 2π/3 and µ = π/2 + γ2 = π/2. The solution for µ = 2π/3 corresponds to a critical value Fc ≈ 0.3578 of the Froude number F . Solutions with µ = π occur for F > Fc , and those with µ = π/2 + γ2 = π/2 occur for F < Fc . Therefore we have µ=π
when
F > Fc ,
(3.238)
2π when F = Fc , (3.239) 3 π (3.240) µ= when F < Fc . 2 As expected these solutions are the limit of those of Figure 3.40 as γ2 → 0. The three relations (3.229)–(3.231) reduce to (3.238)–(3.240) as γ2 → 0, with µ=
Hc = (2Fc2 )1/3 .
(3.241)
The computations were performed as follows. For the solutions with µ = π and µ = π/2, we truncated the series (3.237) after N terms and satisfied (3.235) at the N collocation points (3.228). For a given value of F , this gives a system of N algebraic equations with N unknowns. This system is solved by Newton’s method. For µ = 2π/3, F is one unknown. Therefore we truncate the series (3.237) after N − 1 terms and satisfy (3.235) at the N collocation points (3.228). This leads again to a system of N algebraic equations with N unknowns. Typical free-surface profiles are shown in Figures 3.48–3.52. 0
0
0.2
0.4
Fig. 3.48. Rising bubble in a tube for F = 0.1.
The solutions that we have computed model the flow emerging from a nozzle (see Figure 3.46) or a bubble rising in a tube (see Figure 3.47). On
92
Free-surface flows that intersect walls 0
0
0.2
0.4
Fig. 3.49. Rising bubble in a tube for F = 0.3. 0
0
0.2
0.4
Fig. 3.50. Rising bubble in a tube for F = Fc . There is a 120◦ angle at the apex of the bubble.
physical grounds we expect a bubble to be characterised by a continuous slope at its apex. This implies that µ = π/2. Therefore all the solutions for 0 < F < Fc should model a rising bubble. However, experiments (see [32] and [107]) showed that bubbles are only observed for a unique value, Fe ≈ 0.25,
(3.242)
of the Froude number. Clearly the value Fe is in the interval 0 < F < Fc for which we have computed bubbles but the question is to find what is special about the value Fe . This is an example of a ‘selection problem’. We have already encountered such a problem in Section 3.2.2. There we found that cavitating flow past a circular cylinder could be calculated for all values γ ∗ < γ¯ < γ ∗∗ when surface tension was neglected. We then showed that a unique solution, for γ¯ ≈ 55◦ , could be selected by solving the problem with
3.3 The effects of gravity
93
0
0
0.2
0.4
Fig. 3.51. Rising bubble in a tube for F = 0.4. A cusp is appearing at the apex. 0
0
0.2
0.4
Fig. 3.52. Rising bubble in a tube for F = 1. There is a pronounced cusp at the apex of the free-surface profile.
T = 0 and then taking the limit as T → 0. We shall show in Section 3.4 that a unique bubble can again be selected by introducing surface tension and then taking the limit as T → 0. We conclude this section by mentioning that our findings with T = 0 are consistent with analytical results derived by Garabedian [62]. Garabedian [62] proved that there are mathematical solutions describing ‘bubbles’ with a continous slope at the apex for all values of F smaller than a critical value Fc . He then used an energy argument to suggest that the only physically significant solution is the one for which F = Fc . In addition he showed that Fc > 0.2363. However, our computations using series truncation showed that Fc ≈ 0.36. This value is about 40 percent higher than the experimental value (3.242). Furthermore the solution corresponding to F = Fc does not have
94
Free-surface flows that intersect walls
a continuous slope at the apex since µ = 2π/3 (see Figure 3.50). Therefore Garabedian’s energy argument does not select the relevant solution. 3.3.3 Solutions with β1 = π/2 (flow under a gate with gravity) In this section we consider solutions for the flow configuration of Figure 3.37 with β1 = π/2. The analysis follows [171] and [94]. We introduce dimensionless variables by using U as the unit velocity and H as the unit length. The Bernoulli equation (3.160) can be written as 1 1 2 (u + v 2 ) + 2 y = B, 2 F
(3.243)
where U . (gH)1/2
F =
(3.244)
C
µ
E
F
y A
B
x
Fig. 3.53. The flow under a gate showing, the angle µ between the free surface EF and the wall CE.
We represent the complex velocity w by t − d (γ2 −γ1 )/π γ1 /π (t + 1) 2−2µ/π A(1−t)2 µ˜ / π t e G(t), w= 1 − td 2
(3.245)
where A is a real constant to be found as part of the solution. The function G(t) is free of singularities. The condition w = 1 at t = 1 implies that G(1) = 0. Therefore we can write ∞
G(t) = e
n=1
a n (tn −1)
.
(3.246)
Following the derivation leading to (3.224) we rewrite (3.243) as uuσ + vvσ −
v 1 σ cotan = 0. πF 2 2 u2 + v 2
(3.247)
3.3 The effects of gravity
95
We now present explicit computations for γ1 = γ2 = π/2 (i.e. for the flow configuration of Figure 3.53). As we shall see, these numerical computations show that there are solutions corresponding to the three possible values π, π/2 and 2π/3 of µ. We first calculate the solutions corresponding to µ = π (i.e. solutions for which the free surface leaves the wall tangentially). We truncate the infinite series in (3.245) after N −2 terms and introduce the N −1 collocation points 1 π I− , I = 1, 2, . . . , N − 1. (3.248) σI = N −1 2 We then use (3.245) to evaluate u − iv at the mesh points (3.248) and obtain N − 1 algebraic equations by satisfying (3.247) at these points. One more equation is given by (3.216). The final equation is obtained by fixing a parameter characterising the flow. An obvious choice for this parameter is the Froude number F . However, the computations reveal that there can be several solutions corresponding to the same value of the Froude number; a better choice for the parameter is the dimensionless velocity at the separation point E. Therefore we set qE = |(w)t=−1 |.
(3.249)
This leads to a system of N + 1 equations for the N + 1 unknowns a1 , a2 , . . . , ¯. aN −2 , A, F and µ Typical profiles are presented in Figures 3.54 and 3.55. 2
1
0
0
1
2
3
Fig. 3.54. Computed free-surface profile for the flow under a gate with F = 2. The angle µ is equal to π.
The values of the dimensionless velocity qE at the separation point E versus the Froude number F are shown in Figure 3.56.
96
Free-surface flows that intersect walls
2
1
0
0
1
2
3
Fig. 3.55. Computed free-surface profile for the flow under a gate with F = 1.8. The angle µ is equal to π. 1.0
0.8
0.6
0.4
0.2
0 1.6
2.0
2.4
2.8
3.2
Fig. 3.56. Values of the dimensionless velocity qE at the separation E versus the Froude number F .
As F → ∞, so qE → 1 and the solution reduces to the free streamline solution (3.39). As qE decreases from 1, the Froude number F first decreases to a minimum value F2 ≈ 1.8 and then increases up to the value F1 ≈ 1.87. The value F = F1 corresponds to qE = 0. These results show that a unique solution with µ = π exists for all values of F > F1 . For F2 < F < F1 , two different solutions with µ = π are possible. For F < F2 , there are no solutions with µ = π. The coefficients an were found to decrease rapidly as n increases. However, as qE approches zero, the rate of convergence of the series deteriorates and larger and larger values of N are needed to obtain accurate solutions. This is due to the fact that solutions with qE = 0 must correspond to µ = π/2 or µ = 2π/3. Therefore they cannot be computed by the expansion (3.245), (3.246) with µ = π.
3.3 The effects of gravity
97
We now consider solutions with µ = 2π/3. Numerical experimentation shows that there is only one solution. This is the limit of the family of solutions with µ = π as qE → 0. To calculate it, we set µ = 2π/3 in (3.245), truncate the infinite series in (3.246) after N − 3 terms and satisfy (3.247) at the mesh points (3.248). This leads to N − 1 equations for the N unknowns ¯. The last equation is (3.216). The resulting a1 , a2 , . . . , aN −3 , A, F and µ numerical solution is shown in Figure 3.57.
3
2
1
0
0
1
2
3
Fig. 3.57. Computed free-surface profile for the flow under a gate with µ = 2π/3. The solution is unique and the corresponding value of the Froude number is F = F1 ≈ 1.86.
Finally, we look for solutions with µ = π/2. Numerical experimentation shows that there is a one-parameter family of solutions (the parameter can be chosen as the Froude number F ). This family exists for F > F1 . As F → F1 , the solutions approach the solution corresponding to F = F2 and qE = 0. A typical free-surface profile is shown in Figure 3.58. To compute these solutions we set µ = π/2 in (3.245), truncate the infinite series in (3.246) after N − 2 terms and again satisfy (3.247) at the mesh points (3.248). For a given value of F , this leads to N − 1 equations for the ¯. The last equation is given as before N unknowns a1 , a2 , . . . , aN −2 , A and µ by (3.216). Although these solutions are mathematically interesting they are unstable since in them the heavy fluid is lying on top of the light one. Values of the contraction ratio Cc versus F for the solution branch with µ = π are shown in Figure 3.59. Budden and Norbury [24] derived the following asymptotic solution for Cc : (4j + 2)π 2 + π 3 π − α − 0.0007α2 + · · · (3.250) Cc = π+2 (π + 2)5
98
Free-surface flows that intersect walls
3
2
1
0
0
1.0
2.0
Fig. 3.58. Computed free-surface profile for the flow under a gate with µ = π/2. The value of the Froude number is F ≈ 1.9. 0.6
0.5
0.4
1.6
2.0
2.4
2.8
3.2
Fig. 3.59. Values of the contraction ratio Cc versus the Froude number F .
Here j = 0.915 0965 · · · and α is defined by 2 3 F4 2 α= 1−δ + 2 4 F
(3.251)
where δ = qE . For F = 2, the value of the contraction ratio predicted by (3.250) agrees with the numerical results within one per cent.
3.4 The combined effects of gravity and surface tension When gravity is included in the dynamic boundary condition and surface tension is neglected, only three values of the angle µ between the free surface EF and the rigid wall DE are allowed for the flow configuration of Figure 3.37. When surface tension is included and gravity neglected, all values of
3.4 The combined effects of gravity and surface tension
99
µ are in principle possible. Therefore we can expect interesting behaviours to occur when both gravity and surface tension are taken into account, especially in the limit T → 0.
3.4.1 Rising bubbles in a tube We present our main findings for the flow of Figure 3.46. The analysis follows Vanden-Broeck [166]. We recall that this configuration also models the flow past a bubble in a tube (see Figure 3.47). As in Section 3.3.2 we assume without loss of generality that there is an angle µ between the wall CE and the free surface EF at the point E (see Figure 3.46). If the free surface leaves the wall tangentially then µ = π. If µ < π then the flow near E is locally a flow inside an angle and the speed at E is zero. If µ > π then the flow near E is locally a flow around a corner and the speed at E is infinite. Following the analysis in Section 3.3.2, we introduce dimensionless variables by taking the constant velocity U at x = −∞ as the reference velocity and the distance H between AB and CE as the reference length. The dynamic boundary condition on the free surface EF can be written in dimensionless variables as 1 2 1 2 q − (3.252) x + K = B. 2 2F 2 α Here q is the magnitude of the velocity variable, K the curvature of the free surface EF , B the Bernoulli constant, F the Froude number defined in (3.233) and α the Weber number, defined by α=
2ρU 2 H . T
(3.253)
As noted in Section 3.3.2 only values of µ ≤ π are allowed when T = 0 because the dynamic boundary condition (3.160) requires the velocity qE at the point E in Figure 3.46 to be finite. However, when T = 0, values of µ > π are in principle possible because an infinite value of q in (3.252) can be balanced by an infinite value of the curvature. Examples of such flows with surface tension included and gravity neglected were covered in Section 3.2. In this section we show examples of gravity–capillary flows for which qE is infinite. The physical relevance of such flows can of course be questioned. However, we shall see that their consideration is crucial in constructing systematically other physical solutions. The flow configuration in the complex potential plane is shown in Figure 3.4. We map it into the complex t-plane by using (3.8). The complex t-plane is illustrated in Figure 3.5. Proceeding as in Section 3.3.1, we write
100
Free-surface flows that intersect walls
the complex velocity w as w=
[− ln Cp (1 − t)]1/3 (1 + t)2−2µ/π G(t), (− ln Cp )1/3
where
∞
G(t) = e
n=1
a n tn
.
(3.254)
(3.255)
1.0
0.8
0.6
0.4
0.2
0
0
0.2
0.4
0.6
0.8
1.0
1.2
Fig. 3.60. Values of ν versus F for the flow configuration of Figure 3.47 when α = ∞, i.e. T = 0.
1.0
0.8
0.6
0.4
0.2 0
0.2
0.4
0.6
0.8
1.0
1.2
Fig. 3.61. Values of ν versus F for the flow configuration of Figure 3.47 when α = 10.
Next we differentiate (3.252) with respect to φ and use (3.10) and the chain rule to obtain u 1 σ 4π ∂ σ uvσ − vuσ cotan + = 0. tan 2uuσ + 2vvσ + πF 2 2 u2 + v 2 α ∂σ 2 (u2 + v 2 )1/2 (3.256)
3.4 The combined effects of gravity and surface tension
101
1.1
1.0
0.9
0.8
0.10
0.15
0.20
0.25
0.30
Fig. 3.62. Enlargement of part of Figure 3.61 showing clearly oscillations around 1.0. 0.0
0
0.2
0.4
Fig. 3.63. The selected bubble for T = 0. The value of the Froude number is F = F ∗ ≈ 0.23.
We truncate the infinite series in (3.255) after N −1 terms and satisfy (3.256) at the mesh points 1 σI = 2N
1 I− 2
,
I = 1, . . . , N.
(3.257)
This is achieved by substituting (3.254) and its derivative with respect to σ into (3.256). It leads to N nonlinear equations for the N unknowns a1 , . . . , aN −1 and µ. This system is solved by Newton’s method for given values of F and α. We start the presentation of the numerical results by recalling the findings of Section 3.3.2 when T = 0 (i.e. α = ∞). They are shown graphically in
102
Free-surface flows that intersect walls
Figure 3.60 where we plot the parameter ν=2
π−µ π
(3.258)
versus F . There is a unique solution with µ = 2π/3 (i.e. ν = 2/3) for F = Fc ≈ 0.36. Solutions with µ = π/2 (i.e. ν = 1) and µ = π (i.e. ν = 0) occur for F < Fc and F > Fc respectively. The curve of Figure 3.60 is discontinuous with a jump at F = Fc . When surface tension is included in the dynamic boundary condition, the discontinuity disappears and the curve of Figure 3.60 is replaced by a continuous one. This is illustrated in Figure 3.61, where we present values of ν versus F for α = 10. An interesting feature is that the curve of Figure 3.61 oscillates infinitely often around ν = 1. An enlargement of Figure 3.61 is shown in Figure 3.62. As F decreases, the amplitude and wavelength of the oscillations decrease. These results suggest that there is a countably infinite set of values of F for which ν = 1. We denote this set by Fi∗ ,
i = 1, 2, 3, . . . ,
(3.259)
where F1∗ > F2∗ > F3∗ > · · · . We recall that physically relevant bubbles are identified as those for which ν = 1. Therefore all bubbles with F < Fc are physically relevant when T = 0 whereas only those corresponding to the set (3.259) are physically relevant when T = 0. The numerical computations show that, for each given value of i, Fi∗ → F ∗
as α → ∞,
(3.260)
where F ∗ ≈ 0.23.
(3.261)
This is illustrated in Figure 3.64, where we plot values of F1 versus α−1 . As T → 0 (i.e. α−1 → 0), F1 → F ∗ in agreement with (3.260). Our findings can be summarised as follows. When T = 0, there is a bubble (with µ = π/2) for each value of 0 < F < Fc . When T = 0, there is a bubble (with µ = π/2) for a discrete set of values of F (see (3.259)). As T → 0, the discrete set reduces to a unique value F = F ∗ of F . Therefore we have succeeded in selecting a unique solution by including surface tension and taking the limit as T → 0. Moreover the selected value F ∗ ≈ 0.23 is close to the experimental value Fe ≈ 0.25 (see [32] and [107]).
3.4 The combined effects of gravity and surface tension
103
2.0
1.5
1.0
0.5
0
0
0.1
0.2
0.3
Fig. 3.64. Values of α−1 versus F1∗ . As α−1 → 0, F1 → F ∗ ≈ 0.23.
3.4.2 Fingering in a Hele Shaw cell Another classical example of the selection of solutions via surface tension occurs in the study of fingering in a Hele Shaw cell, This problem can be motivated as follows. It is well known that an instability may occur in a porous medium when a less viscous fluid drives a more viscous fluid (Saffman and Taylor [132]). To study this instability, experiments have been performed in a Hele Shaw cell, a channel formed by two closely spaced parallel glass plates; this provides a model of a two-dimensional flow through a porous medium. It was found that the unstable interface develops a number of ‘fingers’. After some time, one finger dominates and suppresses the growth of the others and the flow reaches a steady state in which a single finger propagates without change of shape. McLean and Saffman [109] modelled this finger by a two-dimensional potential flow with surface tension included at the interface (see Figure 3.65). They denoted by U the velocity of the finger, 2a the lateral width of the channel, b the transverse thickness, T the surface tension and µ ˜ the viscosity (here we use a tilde to avoid confusion with the angle µ used earlier in this section). In addition they denoted the ratio of the width of the finger and the width of the channel by λ. Taking a as the unit length and (1 − λ)U as the unit velocity, McLean and Saffman derived a nonlinear integro-differential equation for the unknown shape S of the free surface: S ln q(S) = − π
0
1
θ(S ) dS , S (S − S)
(3.262)
104
Free-surface flows that intersect walls y q
A
x B
Fig. 3.65. Model for a finger in a Hele Shaw cell. Only half the finger is shown.
κqS
d dS
qS
dθ dS
θ(0) = 0, π θ(1) = − , 2
− q = − cos θ,
(3.263)
q(0) = 1,
(3.264)
q(1) = 0.
(3.265)
Here
κ=
θ = θˆ − π,
(3.266)
q = (1 − λ)ˆ q,
(3.267)
T b2 π 2 . 12µU a2 (1 − λ)2
(3.268)
The integral in (3.262) is of Cauchy principal-value form. The variables θˆ and qˆ in (3.266) and (3.267) are defined in terms of the dimensionless complex velocity u ˆ − iˆ v by the relation ˆ
u ˆ − iˆ v = qˆe−iθ .
(3.269)
The flow configuration is illustrated in Figure 3.65. The x ˆ-axis is parallel to the walls of the channel and is the axis of symmetry of the finger. The points A and B correspond to S = 0 and S = 1 respectively. After a solution for θ and q is obtained, the shape of the finger is given by 1 − λ 1 eiθ x ˆ(S) + iˆ y (S) = − dS. (3.270) π S Sq
3.4 The combined effects of gravity and surface tension
105
For κ = 0 (i.e. in the absence of surface tension), Saffman and Taylor [132] obtained the following exact solution:
(1 − S)/(1 − λ)2 q= (1 − λ)2 + S(2λ − 1) θ = cos−1 q.
1/2 ,
(3.271)
(3.272)
The solution (3.271), (3.272) leaves the parameter λ undetermined. In other words a solution can be found for each value of 0 < λ < 1. This finding is not consistent with experiments, which show that for small values of the surface tension there is only one finger, corresponding to λ ≈ 0.5. This is again a selection problem that can be resolved by solving the problem with surface tension and then taking the limit as the surface tension approaches zero. Early numerical calculations with κ = 0 were performed by McLean and Saffman [109], who identified one family of solutions. Romero [129] then found two other families. As we shall see there is in fact a countably infinite set of families of solutions. There is a strong analogy between the fingering problem and the bubble problem of Figure 3.47. The procedure to find the discrete set (3.259) allowed the angle µ to be found as part of the solution. Therefore we shall use a similar approach for the fingering problem. The analysis follows VandenBroeck [161]. We define a modified problem that has solutions for all values of λ and κ. This modified problem is obtained by replacing (3.265) simply by q(1) = 0.
(3.273)
Therefore θ(1) becomes an unknown to be found as part of the solution. We solve the modified problem defined by (3.262)–(3.264) and (3.273) and obtain solutions for all values of λ and κ. We will then obtain solutions of the original problem by selecting among the solutions of the modified problem those for which θ(1) = −π/2. Following McLean and Saffman [109] we introduce the change of variables Sτ = 1 − ζ γ .
(3.274)
1 cotan πτ = κ. τ2
(3.275)
Here τ is the smallest root of
106
Free-surface flows that intersect walls
With (3.274), θ is twice differentiable with respect to ζ at both end points. McLean and Saffman [109] chose γ = 2 in (3.274). In order to solve the modified problem we will choose γ = 4. We introduce the N mesh points I −1 , N
ζI =
I = 1, . . . , N.
(3.276)
We also define the unknowns θI = θ(1 − ζIν ),
I = 1, . . . , N.
(3.277)
We discretise the system (3.262)–(3.264) and (3.273) by following the procedure outlined by McLean and Saffman [109]. Thus we obtain N − 1 nonlinear algebraic equations for the N − 1 unknowns θI , I = 2, . . . , N . For given values of λ and κ this system is solved by Newton’s method. In Figure 3.66 we present numerical values of θ(1) versus λ for κ = 0.273. As λ approaches zero, θ(1) → −π and the finger collapses on the negative x ˜-axis. As λ approaches unity, θ(1) oscillates infinitely often around −π/2. An enlargement of part of Figure 3.66 is shown in Figure 3.67 to illustrate the oscillations clearly. Figures 3.66 and 3.67 show that there is a countably infinite set of values of λ for which θ(1) = −π/2. We denote this set by λi ,
i = 1, 2, 3, . . .
(3.278)
where λ1 > λ2 > λ3 · · · . 1.72
1.68
1.64
1.60
1.56 0.5
0.6
0.7
0.8
0.9
1.0
Fig. 3.66. Values of θ(1) versus λ for κ = 0.273.
3.4 The combined effects of gravity and surface tension
107
The solutions corresponding to the values (3.278) of λ are the solutions of the original problem.
1.572
1.571
1.570
1.569 0.70
0.75
0.80
0.85
0.90
Fig. 3.67. Enlargement of part of Figure 3.66 showing clearly the oscillations around π/2.
Vanden-Broeck [161] showed numerically that, for a given value of i, λi →
1 2
as
κ → 0.
(3.279)
It can be seen from relation (3.279) that a unique solution corresponding to λ = 1/2 is selected in the limit as the surface tension tends to zero. We note that (3.279) is comparable with (3.260). This finding is illustrated in Figure 3.68, where values of λ1 , λ2 and λ3 versus κ are plotted. As κ → 0, the three curves approach λ = 1/2.
0.82
0.74
0.66
0.58
0.50
0
0.2
0.4
0.6
0.8
1.0
Fig. 3.68. Values of λ versus κ.
1.2
108
Free-surface flows that intersect walls
3.4.3 Further examples involving rising bubbles We now return to potential flows and present three other examples of freesurface flows for which a unique solution can be selected by taking the limit T → 0. These flows are similar to the flow past a bubble shown in Figure 3.47. The first two are given in Figures 3.69 and 3.70. They model a two-dimensional bubble rising at a constant velocity U in an unbounded fluid when viewed in a frame of reference moving with the bubble. Both configurations include a model for the wake behind the bubble. In that sense they are improvements on the flow of Figure 2.2, in which the wake was neglected. The free-surface flows of Figures 3.69 and 3.70 can be solved by series truncation methods similar to those used earlier in this section. Details can be found in [170] and [174] respectively. We summarise here the main results.
E A
U y
x D
S
S'
E'
J'
J
Fig. 3.69. A free streamline model for a rising bubble.
In Figure 3.69, a free streamline model (similar to the cavitating models of Section 3.1.2) is used. This implies that the velocity is equal to U on the boundaries SJ and S J of the wake. When surface tension is neglected there is one solution for each value of the Froude number F =
U , (gD)1/2
(3.280)
where D is defined in Figure 3.69. If we denote by µ the angle between the
3.4 The combined effects of gravity and surface tension
109
E U
A
y x
S
S'
L
J'
J
Fig. 3.70. Joukovskii’s model for a rising bubble.
symmetry line EA and the free surface AS then it is found that µ=
π 2
when
F < Fc ,
(3.281)
µ=
2π 3
when
F = Fc ,
(3.282)
µ=π
when
F > Fc ,
(3.283)
where Fc ≈ 0.9.
(3.284)
These findings are very similar to those obtained in (3.238)–(3.240) for the flow of Figure 3.47. Introducing the surface tension T on the surface SAS of the bubble yields a discrete set of values of F for which µ = π/2. A unique solution for which F ≈ 0.51 is then obtained by taking the limit T → 0 (see [170] for details). The flow of Figure 3.70 is similar to that of Figure 3.69 except that the boundary of the wake is now approximated by two vertical lines, SJ and S J . This flow can be characterised by the Froude number F =
U , (gL)1/2
(3.285)
110
Free-surface flows that intersect walls
where L is defined in Figure 3.70. This is a crude model for the wake. It is, however, of mathematical interest because Joukovskii (see [69]) found an exact solution in the absence of surface tension. This solution is characterised by F = (2π)−1/2 . The results obtained for the flow of Figure 3.69 suggest by analogy that there is a solution for each value of F and that Joukosvkii’s solution is just a member of this family of solutions. This was confirmed by the numerical computations in [174], where it was shown that there is a solution for the flow configuration of Figure 3.70 for 0 < F < ∞ satisfying (3.281)–(3.283), where µ is the angle between EA and AS in Figure 3.70 and where Fc ≈ 0.66. As before a unique solution with µ = π/2 can be selected by introducing surface tension and taking the limit T → 0. Interestingly, the numerical computations suggest that the selected solution is Joukovskii’s exact solution (see [174]). The third example is a generalisation of the problem of a bubble rising in a tube considered in Sections 3.3.2 and 3.4.1. The flow configuration is shown in Figure 3.71(a). Gravity is acting vertically downwards. The angle between the left-hand wall and the horizontal is denoted by β, and the angle between the negative x-axis and the tangent line to the free surface JS at J is denoted by γ. When β < π/2, Figure 3.71(a) models a physical bubble rising in an inclined tube. 1.5
1.5 I'
0.5 y
0
I'
I
U
1.0
0.5
x
y
0
S
I
U
1.0
x S
J
J H
J'
J' 0
(a)
0.5
0
0.5
(b)
Fig. 3.71. The flow domain and the coordinates. This is a computed profile for β = 7π/12, F = 0.11 and ω = 10.
This problem was studied experimentally by Maneri [107] and has been studied theoretically in [36] and [95]. The flow configuration of Figure 3.71(a)
3.4 The combined effects of gravity and surface tension
111
also describes a jet emerging from a nozzle and falling down along a wall. In this case the flow is viewed as bounded on the left by an infinite wall and on the right by a semi-infinite wall and a free surface (Figure 3.71(b)). The flow can be characterised by the Froude number F =
U (gH)1/2
(3.286)
and the Weber number ρU 2 H . (3.287) T Here ρ is the density of the fluid, U the velocity as x → ∞ and H the width of the tube. When T = 0 (i.e. ω = ∞), the admissible values of γ depend on β and can be predicted by the local analysis of Section 3.3 (see Figure 3.38). When 0 < β < 2π/3, there is a critical value Fc of the Froude number F such that solutions with γ = 0, γ = π/3 and γ = π − β occur for F > Fc , F = Fc and F < Fc respectively. Values of Fc versus β are shown in Figure 3.72. However, for 2π/3 ≤ β ≤ π there is no such critical value of F , and γ = 0 for all 0 < F < ∞ (see [95]). ω=
0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0
0
30
60
90
120
Fig. 3.72. Values of Fc versus β.
We note that these results include those of Section 3.3.2 as a particular case, since the flow of Figure 3.71(a) is simply half that √of Figure 3.47. Figure 3.72 predicts Fc ≈ 0.506. Dividing this value by 2 to take into account the different definitions of H in Figures 3.3.2 and 3.71(a) gives 0.36, in agreement with the value obtained in Section 3.3.2.
112
Free-surface flows that intersect walls
We now consider in more detail the problem of a bubble rising in an inclined tube (i.e. the flow of Figure 3.71(a)). The experimental data of Manieri [107] showed that for each value of 0 < β < π/2, there is only one value of F for which a bubble exists. This does not agree with the numerical results, which predict a solution for each value of F and 0 < β < π/2. This discrepancy can be removed by generalising the procedure described in Section 3.4.1. Thus again we introduce surface tension and take the limit as the surface tension tends to zero. Cou¨et and Strumolo [36] chose for each value of β and ω the particular solution corresponding to the largest value of F for which γ = π/2. The selected results were found to be in good agreement with experiment. The results in [95] summarised above show that the only possible values of γ when T = 0 are π − β, π/3 and 0. Therefore there are no solutions with γ = π/2 when T = 0 unless β = π/2. This implies that the criterion, in [36] has to be used with T small but different from zero. Here we follow [95] and use a different selection criterion, in which we take the limit T → 0 instead of keeping T = 0 as in [36]. The numerical results in [95] show that for each value of 0 < β ≤ π/2 and ω there is a discrete set of values Fi∗ ,
i = 1, 2, 3, . . . ,
(3.288)
where F1∗ > F2∗ > F3∗ > · · · ,
(3.289)
for which γ = π − β. This finding reduces to (3.259) when β = π/2. The numerical computations show that for a given value of i Fi∗ → F ∗
as ω → ∞.
(3.290)
The selected values of F ∗ and the corresponding profiles are found to be in close agreement with the experimental data of Manieri [107] (see [95] for details). A typical selected profile for β = π/3 is shown in Figure 3.73. 3.4.4 Exponential asymptotics Since the fingering problem of Section 3.4.2 has an exact solution when T = 0 (see (3.271), (3.272)), it is tempting to try to construct asymptotic solutions for T small in the form of a power series in T . This was achieved by McLean and Saffman [109], who showed that an arbitrary number of terms can be calculated. However, they found that this expansion leads to solutions for each value of 0 < λ < 1. This is to be contrasted with the discrete set of solutions (3.278) found by direct numerical computation.
3.4 The combined effects of gravity and surface tension
113
Fig. 3.73. Computed solution for β = π/3 and F = F ∗ ≈ 0.527. The dots are the experimental values of Manieri [107].
This paradox was resolved by noting that the selection mechanism leading to (3.278) is associated with exponentially small terms in T . Such terms are smaller than any positive integer power of T as T → 0 and therefore cannot be calculated by a power series in T . Exponential asymptotics has been used by many investigators to study this problem analytically (see Saffman [131] for a review and references). Vanden-Broeck showed that the selection mechanism for a rising bubble that leads to (3.259) (see Section 3.4.1) is also associated with exponentially small terms. Over the last 30 years, it has been found that exponentially small terms play a surprisingly significant part in free-surface flow problems. We will encounter further examples later in this book. One example concerns the effect of surface tension on solitary waves (see Chapter 6). Other examples are the free-surface flows generated by moving disturbances for small values of the Froude number or small values of the surface tension (see Chapter 8).
4 Linear free-surface flows generated by moving disturbances
In this chapter we consider free-surface flows generated by a disturbance moving at a constant velocity U . We choose a frame of reference moving with the disturbance and assume that the flow is steady in that frame. We will restrict our attention to two-dimensional linear flows. Nonlinear, three-dimensional and unsteady free-surface flows will be discussed in Chapters 7, 10 and 11 respectively. The disturbance could be a submerged object, say a submarine (see Figure 4.1), an obstacle at the bottom of a channel (see Figure 4.2), a surface-piercing object, say a ship (see Figure 4.3), or a distribution of pressure (see Figure 4.4).
Fig. 4.1. The two-dimensional free-surface flow generated by a submerged object moving at a constant velocity U , when viewed in a frame of reference moving with the object.
Fig. 4.2. The two-dimensional free-surface flow generated by an object moving at a constant velocity U along the bottom of a channel, when viewed in a frame of reference moving with the object.
114
4.1 The exact nonlinear equations
115
Fig. 4.3. The two-dimensional free-surface flow generated by a surface-piercing object moving at a constant velocity U , when viewed in a frame of reference moving with the object. y x
Fig. 4.4. The two-dimensional free-surface flow generated by a pressure distribution moving at constant velocity U , when viewed in a frame of reference moving with the pressure distribution.
4.1 The exact nonlinear equations We introduce cartesian coordinates x, y with the x-axis parallel to the bottom (see Figure 4.4). The fully nonlinear problem can be formulated in terms of a potential function φ(x, y) as φxx + φyy = 0, φy = φx ηx
−h < y < η(x), on y = η(x),
ηxx 1 2 T P (x) + (φx + φ2y ) + gy − =B 3/2 2 2 ρ (1 + ηx ) ρ
(4.2) on
y = η(x),
(4.3)
on y = −h,
(4.4)
on the wetted surfaces of the objects (if any).
(4.5)
φy = 0 φn = 0
(4.1)
Here y = η(x) is the equation of the free surface and φn denotes the normal derivative of φ. The bottom of the channel is at y = −h. Equations (4.2), (4.4) and (4.5) are the kinematic boundary conditions on the free surface, on the bottom and on the surface of any object present, respectively. Equation (4.3) is the dynamic boundary condition on the free surface. The quantity P (x) is the prescribed pressure distribution; the parameter measures its size. We fix the Bernoulli constant B in (4.3) by choosing y = 0 as the
116
Linear free-surface flows generated by moving disturbances
constant level of the free surface corresponding to P = 0 and to a uniform stream with constant velocity U . This leads to 1 B = U 2. (4.6) 2 If the object is fully submerged (i.e. if its surface does not intersect the free surface y = η(x)) and does not touch the bottom y = −h, we need to specify, in addition to equations (4.1)–(4.5), the circulation of the vector velocity around the object. 4.2 Linear theory 4.2.1 Solutions in water of finite depth A first insight into the problem will be gained by developing a linear theory. The analysis presented in this chapter follows Rayleigh [128]. Nonlinear investigations are presented in Chapter 7. The results are qualitatively independent of the nature of the disturbance; therefore we will restrict our attention to the case where the disturbance is a pressure distribution (see Figure 4.4). The nonlinear problem is described by (4.1)–(4.4). To derive a linear theory we assume that the parameter in (4.3) is small and seek a solution in the form of a small perturbation around a uniform stream with constant velocity U and constant depth h. This is motivated by the fact that φ(x, y) = U x, η(x) = 0 is an exact solution of (4.1)–(4.4) when = 0. The linear equations are obtained by expanding the solutions in powers of and retaining only the terms of order . Therefore we write φ(x, y) = U x + φ1 (x, y) + O(2 ),
(4.7)
η(x) = η1 (x) + O(2 ).
(4.8)
Substituting (4.7) and (4.8) into (4.1)–(4.4), using (4.6) and equating terms of order yields φ1xx + φ1yy = 0, φ1y = U η1x U φ1x + gη1 −
−h < y < 0, on
y = 0,
T P η1xx + = 0 on y = 0, ρ ρ
φ1y = 0
on y = −h.
(4.9) (4.10) (4.11) (4.12)
When P = 0 the system (4.9)–(4.12) reduces to the system (2.60)–(2.63) with c = U . Therefore if φ1 = φ1p , η1 = η1p is a particular solution of
4.2 Linear theory
117
(4.9)–(4.12) with P = 0, the general solution of (4.9)–(4.12) with P = 0 is obtained by adding to the particular solution φ1p , η1p an arbitrary multiple of a solution of (2.60)–(2.63). When the condition (2.85) is satisfied, (2.86) and (2.87) give φ1 = φ1p −
U A1 cosh k(y + h) sin k(x + δ), sinh kh
η1 = η1p + A1 cos k(x + δ)
(4.13) (4.14)
where A1 is an arbitrary amplitude and δ an arbitrary phase. The constant k in (4.13) and (4.14) satisfies the equation (2.83) with c = U . Relations (4.13) and (4.14) mean that we can add a train of periodic waves of wavenumber k and of arbitrary amplitude A1 to any particular solution of (4.9)–(4.12) and obtain a new solution. Cases for which the condition (2.85) is not satisfied will be considered in Section 7.3. Rayleigh [128] showed that a unique solution of the linear problem (4.9)– (4.12) can be obtained by using the radiation condition. This condition requires that there is no energy coming from infinity. In other words, if there is a train of waves at x = ∞ in Figure 4.4 then the energy in this wave train must be travelling to the right. Similarly, if there is a wave train at x = −∞ then the energy must be travelling to the left. The discussion at the end of Section 2.4.3 shows that the energy of a wave train travels at the group velocity cg . In a frame of reference in which the disturbance moves to the left at a constant velocity U , the waves and the energy in the waves move also to the left at velocities c = U and cg respectively. In the frame of reference moving with the disturbance, the waves are not travelling and the energy travels to the left at velocity cg − U . Therefore we require cg > U for a wave train at x = −∞ and cg < U for a wave train at x = ∞. We note that for τ < 1/3 and U > cmin there are exactly two possible wave trains (see Figure 2.5). The wave train with k > kmin is characterised by c < cg and can therefore appear at x = −∞. The wave train with k < kmin is characterised by c > cg and can appear at x = ∞. Following Rayleigh [128] we shall see that the radiation condition is automatically satisfied by introducing some dissipation in the equations (4.9)– (4.12), solving the problem and then taking the limit as the coefficient of dissipation tends to zero. One way to do this is to introduce the so-called Rayleigh viscosity µ > 0 and to rewrite (4.11) as U φ1x + gη1 −
T P η1xx + + µφ1 = 0 on y = 0. ρ ρ
(4.15)
We now solve the system (4.9), (4.10), (4.15) and (4.12) and then take
118
Linear free-surface flows generated by moving disturbances
the limit µ → 0. Eliminating η1 between (4.10) and (4.15) gives U φ1xx +
g T Px φ1y − φ1yxx + + µφ1x = 0 U ρU ρ
on y = 0.
We represent φ1 (x, y) by the Fourier integral ∞ F (a, y)eiax da. φ1 (x, y) =
(4.16)
(4.17)
−∞
Substituting (4.17) into (4.9) and (4.12) gives ∂2F − a2 F = 0, ∂y 2 ∂F =0 ∂y
−h < y < 0,
on y = −h.
(4.18) (4.19)
The solution of (4.18) satisfying (4.19) is F (a, y) = A(a) cosh a(y + h), and (4.17) can be rewritten as ∞ φ1 (x, y) = A(a) cosh a(y + h)eiax da.
(4.20)
(4.21)
−∞
Here A(a) is an arbitrary function of a. Next we write the pressure distribution as the Fourier integral ∞ B(a)eiax da. (4.22) P (x) = −∞
The inverse Fourier transform gives ∞ 1 P (x)e−iax dx. B(a) = 2π −∞
(4.23)
Substituting (4.21) and (4.22) into (4.16) gives A(a) =
iB(a) , ρU D(a) cosh ah
(4.24)
where D(a) = a −
T a2 g tanh ah − tanh ah − iµ1 . U2 ρU 2
Here µ1 = µ/U . Combining (4.10), (4.21) and (4.25) yields after integration ∞ iax e B(a) tanh ah 1 η1 (x) = da. 2 ρU −∞ D(a)
(4.25)
(4.26)
4.2 Linear theory
119
To simplify the presentation we assume that P (x) is an even function (i.e. P (−x) = P (x)). It follows from (4.23) that 1 ∞ P (x) cos ax dx. (4.27) B(a) = π 0 Therefore B(a) is a real even function of a, and the integrand in (4.26) can be written as the ratio of a complex numerator and a complex denominator: RN + iIN RN RD + IN ID RD IN − RN ID = +i ; 2 + I2 2 + I2 RD + iID RD RD D D
(4.28)
here RN and RD are real odd functions of a and IN and ID are real even functions of a. The real part of (4.28) is an even function of a and the imaginary part of (4.28) is an odd function of a. Therefore (4.26) can be written as ∞ iax e B(a) tanh ah 2 η1 (x) = da, (4.29) 2 ρU D(a) 0 where denotes the real part. We now take the limit of (4.29) as µ1 tends to zero. If D(a) = 0 for 0 < a < ∞, we obtain ∞ eiax B(a) tanh ah 2 da. η1 (x) = ρU 2 a − (g/U 2 ) tanh ah − (T a2 /ρU 2 ) tanh ah 0
(4.30)
If D(a) vanishes for some values of a, some care has to be taken in taking the limit. This occurs when there are values a∗ such that a∗ −
g T a∗ 2 ∗ tanh a h − tanh a∗ h = 0. U2 ρU 2
(4.31)
Comparing (4.31) with (2.83) we see that a∗ = k, where k is a wavenumber satisfying the dispersion relation (2.83) with c = U . If τ ≤ 1/3, there is a minimum value cmin of c (see Figure 2.5). On the one hand there are then two values a∗1 and a∗2 of a∗ for U > cmin ; without loss of generality we can assume that 0 < a∗1 < a∗2 . On the other hand there are no values a∗ when U < cmin , and the solution is given by (4.30). Let us consider the case τ < 1/3. We rewrite D(a) in the form D(a) =
a [U 2 − C 2 (a)] − iµ1 , U2
where
2
C (a) =
g T + a tanh ah. a ρ
(4.32)
(4.33)
120
Linear free-surface flows generated by moving disturbances
If a∗ is a root of D(a), we seek a root of D(a) for µ1 → 0 by writing a = a∗ + ˜(a∗ ),
(4.34)
where |˜ (a∗ )| is small. Subsituting (4.34) into (4.32) and expanding in a Taylor expansion for ˜(a∗ ) small gives (a∗ ) D(a∗ + ˜(a∗ )) ≈ −˜
2a∗ C(a∗ )C (a∗ ) − iµ1 , U2
(4.35)
where the prime denotes the derivative with respect to a. Therefore ˜(a∗ ) =
−iµ1 U 2 2a∗ C(a∗ )C (a∗ )
(4.36)
to leading order. Since C(a∗ ) = U , we can rewrite (4.36) as ˜(a∗ ) = i0 (a∗ ),
(4.37)
where 0 (a∗ ) = −
µ1 U . ∗ 2a C (a∗ )
(4.38)
We now evaluate the integral in (4.29) by contour integration in the complex plane ξ = a + ib. The quantity C(a) is the phase velocity of linear gravity– capillary waves of wavenumber a (see (4.33)). Relation (2.146) then shows that the group velocity Cg (a) is greater than C(a) when C (a) > 0 and smaller than C(a) when C (a) < 0. The first possibility occurs for a = a∗2 and the second for a = a∗1 (since we have assumed that 0 < a∗1 < a∗2 ). Relation (4.38) shows that 0 (a∗ ) > 0 when C (a∗ ) < 0 and 0 (a∗ ) < 0 when C (a∗ ) > 0. Therefore the pole a∗1 +i0 (a∗1 ) is in the upper half of the complex ξ-plane whereas the pole a∗2 + i0 (a∗2 ) is in the lower half. Similarly, it can be shown that there is also a pole at −a∗1 + i0 (a∗1 ) in the upper half-plane and a pole at −a∗2 + i0 (a∗2 ) in the lower half-plane. We now consider the integral eiξx B(ξ) tanh ξh 2 dξ (4.39) ρU 2 C c D(ξ) where ξ = a + ib. The definition of the contour C depends on the sign of x. For x > 0, the contour C is anticlockwise and consists of the a-axis and a semicircle of radius R in the upper half-plane. For x < 0, the contour C is clockwise and consists of the a-axis and a semicircle of radius R in the lower half-plane. We will refer to the contours C for x > 0 and x < 0 as C + and C − respectively. These contours were
4.2 Linear theory
121
chosen so that the contributions from the semicircles will tend to zero as R → ∞, which follows from the fact that the exponential eiξx = eiax e−bx
(4.40)
appearing in the integrand of (4.39) tends to zero as b → ∞ (b → −∞) when x > 0 (x < 0). Therefore (4.39) reduces to 2 ρU 2
C±
eiξx B(ξ) tanh ξh 2 dξ = D(ξ) ρU 2
∞
−∞
eiax B(a) tanh ah da. D(a)
(4.41)
We now evaluate the integral in (4.39) by using the residue theorem. This gives eiξx B(ξ) tanh ξh 2 dξ = 2iπRI+ + 2iπ[residue at a∗1 + i0 (a∗1 )] ρU 2 C + D(ξ) + 2iπ[residue at −a∗1 + i0 (a∗1 )]
(4.42)
for x > 0 and eiξx B(ξ) tanh ξh 2 dξ = −2iπRI− − 2iπ[residue at a∗2 + i0 (a∗2 )] ρU 2 C − D(ξ) − 2iπ[residue at −a∗2 + i0 (a∗2 )] (4.43) for x < 0. Here RI+ and RI− denote the sums of the residues on the positive and negative parts of the imaginary ξ-axis. Noting that the real part of the first integral on the right-hand side of (4.41) is 2η1 (x) (see (4.29)), combining (4.41) with (4.42) and (4.43) and taking the limit µ1 → 0, we obtain η1 (x) = (iπRI+ ) +
2π B(a∗1 ) tanh a∗1 h sin a∗1 x ρU a∗1 C (a∗1 )
for x > 0
(4.44)
η1 (x) = −(iπRI− ) −
2π B(a∗2 ) tanh a∗2 h sin a∗2 x ρU a∗2 C (a∗2 )
for x < 0.
(4.45)
x→∞
(4.46)
and
Taking the limit |x| → ∞ we find η1 (x) ≈
2π B(a∗1 ) tanh a∗1 h sin a∗1 x ρU a∗1 C (a∗1 )
as
122
Linear free-surface flows generated by moving disturbances
and η1 (x) ≈ −
2π B(a∗2 ) tanh a∗2 h sin a∗2 x ρU a∗2 C (a∗2 )
as
x → −∞.
(4.47)
Relations (4.46) and (4.47) show that the free-surface profile is characterised by a periodic wave train in the far field. These waves have wavelengths 2π/a∗1 and 2π/a∗2 respectively. Since a∗1 < a∗2 , the train of longer wavelength occurs as x → ∞ and the train of shorter wavelength as x → −∞. In conclusion, the linear free-surface profiles are given by (4.30) for U < cmin and by (4.44) and (4.45) for U > cmin .
4.2.2 Solutions in water of infinite depth We now examine the particular case of water of infinite depth. The exact relations are given by (4.1)–(4.3), (4.6) and φx → U,
φy → 0 as y → −∞.
(4.48)
Proceeding as in Section 4.2.1, we assume (4.7) and (4.8) with small and derive the linearised system φ1xx + φ1yy = 0,
y < 0,
(4.49)
φ1y = U η1x
y = 0,
(4.50)
U φ1x + gη1 −
on
T P η1xx + + µφ1 = 0 on y = 0, ρ ρ
φ1x → 0
φ1y → 0 as
y → −∞.
(4.51) (4.52)
Eliminating η1 (x) between (4.50) and (4.51) yields (4.16). The remaining analysis follows closely that of Section 4.2.1. We find ∞ A(a)e|a|y eiax da (4.53) φ1 (x, y) = −∞
with A(a) =
iB(a) , ˜ ρU D(a)
(4.54)
where B(a) is given by (4.27) and g |a| T a2 |a| ˜ − − iµ1 . D(a) =a− 2 U a ρU 2 a
(4.55)
4.2 Linear theory
The expression for the profile η1 (x) is ∞ iax e B(a) 2 da. η1 (x) = 2 ˜ ρU 0 D(a)
123
(4.56)
Since only positive values of a are involved in (4.56) we can now rewrite ˜ D(a) as g T a2 ˜ D(a) =a− 2 − − iµ1 . U ρU 2
(4.57)
˜ We now take the limit µ1 → 0. If D(a) = 0 for 0 < a < ∞, we obtain ∞ eiax B(a) 2 da. (4.58) η1 (x) = ρU 2 a − (g/U 2 ) − (T a2 /ρU 2 ) 0 The expression (4.58) is the equivalent of (4.30) in water of infinite depth. As expected, it can be formally derived from (4.30) by replacing the tanh factors by 1. ˜ If D(a) vanishes for some values of a then some care is needed in taking the limit µ1 → 0, and we follow the approach of Section 4.2.1. This situation occurs when there are values a∗ such that a∗ −
g T a∗2 − = 0. U2 ρU 2
(4.59)
Comparing (4.59) and (2.95), we see that a∗ = k, where k is a wavenumber satisfying the dispersion relation (2.95) with c = U . Referring to Figure 2.6, we see that there are two values a∗1 < a∗2 of a∗ for U > cmin , where cmin is given by (2.98). These values are given explicitly by solving the quadratic equation (4.59); they are 1/2 2 4T g ρU 1− 1− , (4.60) a∗1 = 2T ρU 4 1/2 2 4T g ρU 1+ 1− a∗2 = . 2T ρU 4
(4.61)
However, there are no values a∗ when U < cmin ; then the solution is given by (4.58). ˜ in the form When U > cmin , we rewrite D(a) a ˜ D(a) = 2 [U 2 − C 2 (a)] − iµ1 , (4.62) U where g T C 2 (a) = + a. (4.63) a ρ
124
Linear free-surface flows generated by moving disturbances
The remaining part of the calculations follows step by step that of Section 4.2.1, with the tanh factors replaced by 1. This leads to η1 (x) = (iπRI+ ) +
2π B(a∗1 ) sin a∗1 x, ρU a∗1 C (a∗1 )
x > 0,
(4.64)
η1 (x) = (iπRI− ) −
2π B(a∗2 ) sin a∗2 x, ρU a∗2 C (a∗2 )
x < 0.
(4.65)
and
Taking the limit |x| → ∞ we find η1 (x) ≈
2π B(a∗1 ) sin a∗1 x ρU a∗1 C (a∗1 )
as x → ∞
(4.66)
and η1 (x) ≈ −
2π B(a∗2 ) sin a∗2 x as ρU a∗2 C (a∗2 )
x → −∞.
(4.67)
As in water of finite depth, (4.66) and (4.67) and the inequality a∗1 < a∗2 imply that the solutions are characterised by a wave train of ‘long’ wavelength as x → ∞ and a wave train of ‘short’ wavelength as x → −∞. For U values not close to cmin , the long waves are dominated by gravity and the short waves are dominated by surface tension. The solution in the absence of surface tension is obtained by taking the limit T → 0. Relations (4.60) and (4.61) show that a∗1 → g/U 2
and a∗2 → ∞
as
T → 0.
(4.68)
It follows that the right-hand side of (4.67) tends to zero. Therefore the free surface is flat as x → −∞ and is characterised by wave trains of wavenumber g/U 2 as x → ∞.
4.2.3 Discussion of the solutions We illustrate these results first in the particular case of water of infinite depth; then cmin is given by (2.98). Following Vanden-Broeck [184] and others, we define the parameter α=
Tg . ρU 4
(4.69)
Then U < cmin and U > cmin correspond respectively to α > 0.25 and α < 0.25.
4.2 Linear theory
125
We present in Figures 4.5 and 4.6 typical free-surface profiles predicted by (4.58) for (see (4.7), (4.8)) equal to ±0.001 and α equal to 0.27. In these calculations we chose P (x) =
ρU 2 −5g 2 x2 /U 4 . e 2
(4.70)
Since α > 0.25, the free surface is flat in the far field (i.e. there are no wave trains in the far field). Since the pressure distribution is symmetric about x = 0, the free-surface profiles are also symmetric about x = 0. They are characterised by oscillations of decaying amplitude as |x| → ∞. This is consistent with the fact that (4.59) does not have real roots a∗ for α > 1/4. In fact solving (4.59) for a∗ yields a∗ =
ρU 2 [1 ± (1 − 4α)1/2 ], 2T
(4.71)
and a∗ is complex when α > 0.25. 0.002
0.001
0
0
10
20
Fig. 4.5. Linear free-surface profile for the pressure distribution (4.70) with = 0.001. The value of α is 0.27.
In Figure 4.7 we present a typical profile calculated from (4.64) and (4.65) with = 0.001 and α = 0.222. The pressure distribution is defined by (4.70). Since α < 1/4, there are wave trains in the far field, in accordance with (4.66) and (4.67). We now examine some limitations and nonuniformities of the linear theory. Those limitations will be resolved in Chapter 7 where we develop a nonlinear theory. First, the linear result (4.58) predicts unbounded displacements of the free surface as α → 1/4+ . This is shown analytically by noting that when
126
Linear free-surface flows generated by moving disturbances 0.001
0
0
10
20
Fig. 4.6. Linear free-surface profile for the pressure distribution (4.70) with = −0.001. The value of α is 0.27. 0.002
0.001
0
0
5
10
15
Fig. 4.7. Linear free-surface profile for the pressure distribution (4.70) with = 0.001. The value of α is 0.222.
α = 0.25, the denominator of the integrand in (4.58) can be written as T − ρU 2
ρU 2 a− 2T
2 (4.72)
and so the integral in (4.58) diverges as α → 0.25+ , because of the double zero in (4.72). Similarly a∗1 →
ρU 2 2T
and a∗2 →
Furthermore, C
ρU 2 2T
ρU 2 2T
as
α → 0.25− .
(4.73)
= 0.
(4.74)
4.2 Linear theory
127
Therefore (4.66) and (4.67) predict waves of unbounded amplitude as α → 0.25− . This behaviour is shown graphically in Figure 4.8, where we present values of the elevation of the free surface at x = 0, i.e. ∞ B(a) 2 da, (4.75) η1 (0) = 2 ) − (T a2 /ρU 2 ) ρU 2 a − (g/U 0 versus α for α > 1/4. Here P (x) is defined by (4.70) and = ±0.001. As α → 1/4+ , η1 (0) tends to infinity in accordance with (4.72). 0.008
0.004
0
0.25
0.26
0.27
0.28
0.29
0.30
Fig. 4.8. Values of the amplitude of the free-surface profile versus α for the pressure distribution (4.70) with = −0.001 (upper curve) and = 0.001 (lower curve). The unit length in the vertical scale is U 2 /g.
These results show that, for a given value of (however small), η1 (x) and φ1 can be made arbitrarily large by taking α sufficiently close to 1/4. This is in contradiction with the assumptions leading to (4.7) and (4.8). In other words, the expansions (4.7) and (4.8) are nonuniform as α → 1/4. As we shall see in Chapter 7, appropriate solutions for α close to 1/4 can be obtained by using a nonlinear theory. We note that the nonuniformity of the linear theory in water of infinite depth is associated with the existence of a minimum phase velocity (see (2.98)). Similar nonuniformities occur in water of finite depth and are associated with the minimum occurring in the phase velocity when τ < 1/3 (see Figure 2.5). Second, a similar nonuniformity occurs for pure gravity flows (g = 0, T = 0) in finite depth as F → 1. This can be shown by setting T = 0 in (4.30) and noting that for a small the denominator of the integrand in (4.30) then behaves like 1 a3 h2 1 + ··· (4.76) 1− 2 a+ 2 F F 3
128
Linear free-surface flows generated by moving disturbances
Therefore the integral in (4.30) diverges as F → 1. This phenomenon is illustrated graphically in Figure 4.9, where we plot values of η1 (0) versus F for F > 1. The curve has a vertical asymptote at F = 1, and the linear theory is not valid for F close to 1. Again, this nonuniformity will be removed in Chapter 7 where we develop nonlinear theories. 0.04
0.03
0.02
0.01
0 0.4
0.6
0.8
1.0
1.2
1.4
Fig. 4.9. Values of the amplitude of the free-surface profile versus F for the pressure distribution (4.70) with = 0.001. The unit of length in the vertical scale is U 2 /g.
As we shall see in Chapter 7 the nonuniformities in Figures 4.8 and 4.9 are associated with the existence of solution branches corresponding to solitary waves.
5 Nonlinear waves – asymptotic solutions
The linear results of Chapter 4 show examples of free-surface flows that approach either periodic wave trains or flat free surfaces in the far field. As we shall see this is also the case for nonlinear free-surface flows. However, periodic waves if present are then nonlinear. This motivates a study of nonlinear travelling gravity–capillary waves since they describe the far-field behaviour of nonlinear flows past disturbances. These solutions are useful in nonlinear computations because they can be employed to derive efficient truncation procedures (see for example Section 7.2.1). They are also interesting canonical free-surface flow problems. This chapter is concerned with asymptotic solutions for nonlinear waves. Fully nonlinear numerical solutions will be presented in Chapter 6. 5.1 Periodic waves As shown in Section 2.4.1, nonlinear travelling gravity–capillary periodic waves are described by the equations φxx + φyy = 0, φy = φx ηx
−h < y < η(x), on y = η(x),
ηxx 1 2 T =B (φx + φ2y ) + gy − 2 ρ (1 + ηx2 )3/2
on y = η(x),
(5.1) (5.2) (5.3)
∇φ(x + λ, y) = ∇φ(x, y),
(5.4)
η(x + λ) = η(x),
(5.5)
1 λ
λ
φx dx = c, 0
129
(5.6)
130
Nonlinear waves – asymptotic solutions
λ
η(x)dx = 0.
(5.7)
0
The flow configuration is illustrated in Figure 2.4. We will derive analytical approximations by improving on the linear approximations of Section 2.4. We first introduce an amplitude parameter to measure the size of the waves (a precise definition will be given later) and seek solutions in the form of expansions in powers of . Thus we write φ(x, y) = cx + φ1 (x, y) + 2 φ2 (x, y) + 3 φ3 (x, y) + O(4 ),
(5.8)
η(x) = η1 (x) + 2 η2 (x) + 3 η3 (x) + O(4 ),
(5.9)
c = c0 + c1 + 2 c2 + 3 c3 + O(4 ),
(5.10)
B = B0 + B1 + 2 B2 + 3 B3 + O(4 ).
(5.11)
Such expansions were first used by Stokes (see [143]) and (5.8)–(5.11) are often referred to as the Stokes expansion. As we shall see, φ1 (x, y), η1 (x) are the linear approximations (2.88), (2.89) and the terms of order 2 , 3 , . . . are nonlinear corrections. One difficulty is that the boundary conditions (5.2) and (5.3) are expressed on y = η(x), where η(x) is itself expressed as an expansion in powers of (see (5.9)). Therefore it is not possible to equate powers of directly. We resolve this difficulty by expanding expanding φy (x, η(x)) and φx (x, η(x)) in Taylor expansions about y = 0. This leads to φy (x, η(x)) = φy (x, 0) + φyy (x, 0)η(x) + φyyy (x, 0) + φyyyy (x, 0)
η 3 (x) + ··· , 6
φx (x, η(x)) = φx (x, 0) + φxy (x, 0)η(x) + φxyy (x, 0) + φxyyy (x, 0)
η 2 (x) 2 (5.12) η 2 (x) 2
η 3 (x) + ··· . 6
(5.13)
Subsituting the expansions (5.8)–(5.10) into (5.12) and (5.13) gives φy (x, η(x)) = φ1y + 2 (φ2y + φ1yy η1 ) 3 2 φ1yyy + O(4 ). + φ3y + φ2yy η1 + η2 φ1yy + η1 2
(5.14)
5.1 Periodic waves
131
Similarly, we obtain φx (x, η(x)) = c0 + (c1 + φ1x ) + 2 (c2 + φ2x + φ1xy η1 ) 3 2 φ1xyy + c3 + φ3x + φ2xy η1 + η2 φ1xy + η1 + O(4 ). 2 (5.15) Substituting (5.8)–(5.11) into (5.1)–(5.7), using (5.14) and (5.15) and equating equal powers of yields B0 =
c20 2
(5.16)
and the three linear problems φ1xx + φ1yy = 0,
−h < y < 0,
φ1y − c0 η1x = 0, φ1y = 0, −
y = 0,
(5.19) y = 0;
−h < y < 0,
φ2y − c0 η2x = c1 η1x − η1 φ1yy + φ1x η1x , φ2y = 0,
(5.18)
y = −h,
T η1xx + c0 φ1x + gη1 = B1 − c0 c1 , ρ φ2xx + φ2yy = 0,
(5.17)
(5.20) (5.21)
y = 0,
y = −h,
(5.22) (5.23)
T − η2xx + c0 φ2x + gη2 = −c0 η1 φ1xy − c1 φ1x − 12 (φ21x + φ21y ) ρ + B2 − 12 c21 − c0 c2 , y = 0; (5.24) φ3xx + φ3yy = 0,
−h < y < 0,
(5.25)
φ3y − c0 η3x = −η1 φ2yy − η2 φ1yy − 12 η12 φ1yyy + c1 η2x + c2 η1x + η1x φ2x + η1x η1 φ1xy + φ1x η2x , φ3y = 0,
y = −h,
y = 0,
(5.26) (5.27)
132
Nonlinear waves – asymptotic solutions
T 3T 2 − η3xx + c0 φ3x + gη3 = − η1xx η1x − c1 c2 − c1 φ2x − c1 φ1xy η1 ρ 2ρ − φ1x c2 − φ1x φ2x − φ1x φ1xy η1 − c0 c3 − c0 φ2xy η1 − c0 η2 φ1xy − 12 c0 η12 φ1xyy − φ1y φ2y − φ1y φ1yy η1 + B3 ,
y = 0. (5.28)
We shall restrict our attention to solutions that are symmetric. Assuming that the origin of x is chosen so that the wave is symmetric about the axis y = 0, we impose φ(−x, y) = −φ(x, y),
(5.29)
η(−x) = η(x).
(5.30)
Using the expansions (5.8) and (5.9) we have φi (−x, y) = −φi (x, y), ηi (−x) = ηi (x),
i = 1, 2, . . . ,
i = 1, 2, . . . ,
(5.31) (5.32)
Applying the method of separation of variables, we seek a solution of (5.17) in the form φ1 (x, y) = X(x)Y (y).
(5.33)
Substituting (5.33) in (5.17) yields X (x) Y (y) =− = constant = −α2 . X(x) Y (y)
(5.34)
Here we choose the separation constant to be negative, so that the solution is periodic in x. Relations (5.33) and (5.19) yield Y (−h) = 0.
(5.35)
Equation (5.34) gives two ordinary differential equations. Using the conditions (5.31) and (5.35), we write their solutions as X(x) = sin αx,
(5.36)
Y (y) = cosh α(y + h).
(5.37)
The periodicity condition (5.4) implies that α = nk,
(5.38)
5.1 Periodic waves
133
where n is a positive integer and k=
2π λ
(5.39)
is the wavenumber. Multiplying (5.36) by (5.37) and taking a linear combination of the solutions corresponding to the values (5.38) of α, we obtain φ1 (x, y) =
∞
Bn cosh nk(y + h) sin nkx.
(5.40)
n=1
Similarly, we can write the solutions of (5.21) and (5.25) as φ2 (x, y) =
∞
Fn cosh nk(y + h) sin nkx,
(5.41)
Gn cosh nk(y + h) sin nkx.
(5.42)
n=1
φ3 (x, y) =
∞ n=1
Here Bn , Fn and Gn are constants. Using (5.7), the periodicity condition (5.5) and the symmetry conditions (5.32), we may express η1 (x), η2 (x) and η3 (x) as Fourier series: η1 (x) =
∞
An cos nkx,
(5.43)
En cos nkx,
(5.44)
Dn cos nkx,
(5.45)
n=1
η2 (x) =
∞ n=1
η3 (x) =
∞ n=1
where An , En and Dn are constants. We now define the parameter as =
a , λ
where a is the first Fourier coefficient of η(x), i.e. 2 λ η(x) cos kx dx. a= λ 0
(5.46)
(5.47)
It follows from (5.43)–(5.45) that A1 = λ
(5.48)
134
Nonlinear waves – asymptotic solutions
and E1 = D1 = 0.
(5.49)
Substituting (5.40) and (5.43) into (5.18) and equating coefficients of sin nkx yields c0 An = −Bn sinh nkh.
(5.50)
Similarly, substituting (5.40) and (5.43) into (5.20) gives B1 = c0 c1 and T An n2 k 2 + gAn + c0 Bn nk cosh nkh = 0. ρ Eliminating Bn between (5.50) and (5.51) yields T 2 2 c20 nk g+ n k − An = 0, ρ tanh nkh
n = 1, 2, . . .
Since A1 = 0 (see (5.48)), (5.52) with n = 1 implies that g T 2 c0 = + k tanh kh. k ρ
(5.51)
(5.52)
(5.53)
Relation (5.52) with n > 1 gives An = 0,
n = 2, 3, . . . ,
(5.54)
provided that g+
c20 nk T 2 2 n k − = 0. ρ tanh nkh
(5.55)
The solution of the first order problem is then φ1 = −
c0 A1 cosh k(y + h) sin kx, sinh kh η1 = A1 cos kx.
(5.56) (5.57)
However, if for some value m of the integer n, the condition (5.55) is not satisfied i.e. if c20 mk T = 0, (5.58) g + m2 k 2 − ρ tanh mkh then the solution is c0 Am c0 A1 cosh k(y + h) sin kx − cosh mk(y + h) sin mkx, φ1 = − sinh kh sinh mkh (5.59) η1 = A1 cos kx + Am cos mkx,
(5.60)
5.1 Periodic waves
135
where Am is arbitrary at this stage of the calculations. As we shall see the values of Am are determined by solvability conditions at higher order in . We conclude this subsection by noting that in the particular case of water of infinite depth, so that h → ∞, the condition (5.55) and the solutions (5.56), (5.57) and (5.59), (5.60) reduce to T 2 2 n k − c20 nk = 0, ρ
(5.61)
φ1 = −c0 A1 eky sin kx,
(5.62)
η1 = A1 cos kx,
(5.63)
φ1 = −c0 A1 eky sin kx − c0 Am emky sin mkx,
(5.64)
η1 = A1 cos kx + Am cos mkx.
(5.65)
g+
Using (5.53), equation (5.61) reduces further to 1 , n
(5.66)
4π 2 T . ρgλ2
(5.67)
κ = where κ is defined by κ=
5.1.1 Solutions when condition (5.55) is satisfied We consider first the case when the condition (5.55) is satisfied. Substituting (5.56) and (5.57) into the right-hand sides of (5.22) and (5.24), we obtain, after some algebra, φ2y − c0 η2x = −c1 A1 k sin kx + c0 A21 k 2 coth kh sin 2kx cosh2 kh T c2 A2 k 2 1 − η2xx + c0 φ2x + gη2 = 0 1 − c20 k 2 A21 ρ 4 4 sinh2 kh (5.68) cosh kh cos kx + c0 c1 A1 k sinh kh 3 2 2 2 1 2 2 cosh2 kh c0 A1 k − c0 k cos 2kx + B2 . + 4 4 sinh2 kh Using the expansions (5.41) and (5.44) in the left-hand sides of the previous two relations and equating coefficients of sin nkx and cos nkx yields B2 =
A21 1 c21 + c20 k 2 , 2 4 sinh2 kh
(5.69)
136
Nonlinear waves – asymptotic solutions
F1 k sinh kh + c0 E1 k = −c1 A1 k,
(5.70)
F1 k cosh kh tanh kh = c1 A1 k,
(5.71)
2kF2 sinh 2kh + 2kc0 E2 =
A21 k 2 c0 , tanh kh
E2 3 1 c0 A21 k 2 2T = c0 A21 k 2 − +g , 2kF2 cosh 2kh + 4k ρ c0 4 4 tanh2 kh nkFn sinh nkh + nkc0 En = 0,
n = 3, 4, . . .
T En n2 k 2 + c0 nkFn cosh nkh + gEn = 0, ρ
n = 3, 4, . . .
(5.72)
(5.73) (5.74) (5.75)
Equations (5.49), (5.70) and (5.71) give F1 = 0,
c1 = 0.
(5.76)
Solving (5.72) and (5.73) yields E2 =
A21 k 2 c20 4 tanh kh − 3 tanh2 kh tanh 2kh + tanh 2kh , 4 tanh2 kh[2kc20 − (4k 2 T /ρ + g) tanh 2kh] 1 F2 = 2k sinh 2kh
A21 k 2 c0 − 2kc0 E2 . tanh kh
(5.77)
(5.78)
Solving (5.74) and (5.75) gives Fn = 0,
En = 0,
n = 3, 4, . . .
(5.79)
Therefore η2 = E2 cos 2kx,
(5.80)
φ2 = F2 cosh 2nk(y + h) sin 2nkx,
(5.81)
where E2 and F2 are defined by (5.77) and (5.78). Combining (5.9), (5.47) and (5.80) gives η = A1 cos kx + 2 E2 cos 2kx.
(5.82)
To conclude the calculation up to order 2 we need to calculate c2 . This is done by substituting the expressions (5.43), (5.46), (5.47), (5.76), (5.80) and (5.81) for η1 , η2 , φ1 , φ2 , c0 and c1 into the right-hand sides of (5.26) and (5.28) and the series (5.42) and (5.45) into the left-hand sides. Equating the
5.1 Periodic waves
137
coefficients of cos kx and those of sin kx gives two equations. Eliminating G1 between these two equations yields, after some algebra, c2 =
c0 A21 k 2 (coth kh + 4 coth 2kh − 3 tanh kh)S2 4 3T k 2 + 3 − 2 coth kh coth 2kh − tanh kh , 4ρgS1
where
S1 =
T k2 1+ ρg
(5.83)
tanh kh
(5.84)
and (T k 2 + ρg) tanh kh[tanh 2kh − 2 coth kh − tanh 2kh (2 sinh2 kh)−1 ] . (16T k 2 + 4ρg) tanh 2kh − 8(T k2 + ρg) tanh kh (5.85) Therefore the phase velocity c is given up to order 2 by (5.10), where c0 , c1 and c2 are defined by (5.53), (5.76) and (5.83) respectively. We conclude this section by examining the behaviour of the solution (5.10) in the shallow-water limit (i.e. as kh → 0). Using the properties S2 = 2
sinh kh ≈ kh
as
kh → 0
and cosh kh ≈ 1 as kh → 0, we find that (5.83) yields 1 c2 ≈ c0 (kh)2
as kh → 0.
(5.86)
Since c1 = 0, (5.10) then implies that, on the one hand, the ratio of the first two terms of the expansion (5.10) for c satisfies 2 2 c2 ≈ c0 (kh)2
as kh → 0;
(5.87)
on the other hand, the expansion (5.10) is only valid asymptotically if the ratio 2 c2 /c0 is small in the limit → 0. Relation (5.87) shows that for any value of > 0 the ratio 2 c2 /c0 can be made arbitrarily large by taking kh sufficiently small. In other words the asymptotic expansions derived in this section become invalid as kh → 0. Appropriate asymptotic expansions that are valid when both and kh are small will be derived in Section 5.2.
138
Nonlinear waves – asymptotic solutions
5.1.2 Solutions when condition (5.55) is not satisfied We now assume that the condition (5.55) is not satisfied for some value m of n. We will present explicit calculations for m = 2. Therefore we have 2kc20 T cos 2kh = 0. g + 4 k2 − ρ sinh 2kh
(5.88)
The solutions for η1 and φ1 are obtained by setting m = 2 in (5.59) and (5.60). This gives φ1 = −
c0 A2 c0 A1 cosh k(y + h) sin kx − cosh 2k(y + h) sin 2kx, (5.89) sinh kh sinh 2kh η1 = A1 cos kx + A2 cos 2kx.
(5.90)
We determine the constants A2 and c1 by substituting (5.89) and (5.90) into the right-hand sides of (5.22) and (5.24). To simplify the algebra and to illustrate the main ideas we shall present these calculations in the particular case of infinite depth. Taking the limit h → ∞ in (5.53), (5.88) and (5.89) gives g T (5.91) c20 = + k, k ρ T g + 4 k 2 − 2kc20 = 0, ρ
(5.92)
φ1 = −c0 A1 eky sin kx − c0 A2 e2ky sin 2kx.
(5.93)
As noted earlier, the condition (5.92) can be rewritten in the simple form 1 κ= , 2
(5.94)
where κ is defined by (5.67). In water of infinite depth, φ ≈ cx as y → −∞. Therefore (5.8) implies that φi → 0,
i = 1, 2, . . .
as
y → −∞.
(5.95)
Using (5.95) with i = 2 and following the derivation of (5.40) we obtain φ2 (x, y) in the form φ2 (x, y) =
∞ n=1
F˜n enky sin nkx.
(5.96)
5.1 Periodic waves
139
Substituting (5.44), (5.96), (5.90) and (5.93) into (5.22) and (5.24) and equating coefficients of sin kx and cos kx yields 3 k F˜1 = −c1 A1 k + c0 A1 A2 k 2 , 2 c2 A1 A2 k 2 + c0 c1 A1 k. c0 F˜1 k = 0 2 Similarly, equating the coefficients of sin 2kx and cos 2kx yields 2k F˜2 + 2kc0 E2 = −2c1 A2 k + c0 A21 k 2 , c2 A2 k 2 T 4 k 2 E2 + gE2 + 2F˜2 kc0 = 0 1 + 2c0 c1 A2 k. ρ 2
(5.97) (5.98)
(5.99) (5.100)
Solving (5.97) and (5.98) gives c1 =
c0 A2 k . 2
(5.101)
Similarly (5.99) and (5.100) give T c2 k 2 − 4 k 2 E2 − gE2 + 2kc20 E2 = 0 A21 − 4c0 c1 kA2 ρ 2 and thus
E2
2kc20
4T k 2 −g − ρ
= −4c0 c1 A2 k +
c20 A21 k 2 . 2
(5.102)
(5.103)
Using (5.91) and (5.92), it can easily be checked that the contents of the parentheses on the left-hand side of (5.103) equal zero. Therefore c1 A2 =
A21 kc0 . 8
(5.104)
A1 2
(5.105)
Combining (5.101) and (5.104) yields A2 = ±
1 η1 = A1 cos kx ± A1 cos 2kx, 2 φ1 = −c0 A1 eky sin kx ∓
c0 A1 e2ky sin 2kx, 2
1 c1 = ± c0 kA1 . 4
(5.106) (5.107) (5.108)
140
Nonlinear waves – asymptotic solutions
We define the steepness s of the wave by the equation s=
η(0) − η(λ/2) λ
(5.109)
Noting that = s/2 to leading order and using (5.9), (5.10), (5.48), (5.106) and (5.108) we obtain π c = c0 ± s c0 + · · · , (5.110) 4 s s η = cos kx ± cos 2kx + · · · . λ 2 4
(5.111)
Relations (5.106) and (5.111) show that there are two solutions when (5.94) is satisfied (one corresponding to the + sign and one to the − sign). The corresponding free-surface profiles in water of infinite depth are shown in Figures 5.1 and 5.2. 1.5
1.0
0.5
0
0
5
10
15
20
Fig. 5.1. The Wilton ripple (5.106) with A1 = 1 and k = 1. This solution corresponds to the + sign in (5.106).
They are usually referred to as the Wilton ripples (because Wilton [198] was one of the first to calculate them). One solution is characterised by a crest dimple and the other by a trough dimple. We note that (5.82) and (5.111) both involve cos kx and cos 2kx. However, a crucial difference is that the cos 2kx term is of order 2 in (5.82) whereas it is of order s, and therefore of order , in (5.111). This implies that (5.82) approaches A1 cos kx as → 0 and that (5.111) approaches (s/2)[cos kx ± (1/2) cos 2kx] as → 0. Therefore the solution (5.111) exhibits the trough and crest dimples shown in Figures 5.1 and 5.2 however small and s are. The above calculations illustrate the nonuniqueness of gravity–capillary periodic waves: we obtain two different solutions if the condition (5.58) is
5.1 Periodic waves
141
1.0
0.5
0
0
5
10
15
20
Fig. 5.2. The Wilton ripple (5.106) with A1 = 1 and k = 1. This solution corresponds to the − sign in (5.106).
satisfied for m = 2. Similar nonuniqueness occurs when (5.58) is satisfied for values of m > 2. Calculations were performed by Nayfeh [116] for m = 3. The analysis can also be extended to finite depth, and solutions valid when (5.58) is satisfied can be derived. However, the calculations for larger values of m become quickly intractable because it is necessary to calculate the solution to high order in in order to find the values of Am in (5.60). Such solutions will be calculated numerically in Sections 6.5.3.1 and 6.5.3.2. We also note that the denominator in (5.77) vanishes when (5.58) is satisfied for m = 2. Similarly, the denominators in ηn and φn for n ≥ 3 are also found to vanish when (5.58) is satisfied for some integer value m. This is consistent with the solutions of Section 5.1.1, which were derived under the assumption (5.55). However, the expansions of Section 5.1.1 are nonuniform in the sense that the ratios of successive terms (for example the ratio of 2 η2 and η1 ) can be made arbitrarily large by making the left-hand side of (5.55) sufficiently small by appropriate choices of the parameters. For future comparison of the present results with the numerical computations of Chapter 6 we now rewrite (5.91) and (5.110) in terms of the parameter κ (see (5.67)) and a parameter µ defined by 2πc2 . gλ
(5.112)
µ=1+κ
(5.113)
µ= This gives
142
Nonlinear waves – asymptotic solutions
and 3 3 πs (1 + κ) = ± πs + · · · (5.114) 2 2 4 Finally let us mention that Wilton [198] calculated further terms in the expansion and found 3 3 s2 µ = ± πs − π 2 ··· (5.115) 2 4 4 µ=1+κ±
5.2 The Korteweg–de Vries equation As we saw in Section 5.1.1, the Stokes expansion becomes nonuniform as h → 0. This suggests that a different expansion should be used when both the depth h and the amplitude of the waves are small. We study in this section asymptotic expansions valid when h is small with various assumptions on the size of the amplitude of the waves. For the sake of generality we will derive these equations in the time-dependent case. Travelling waves will then be found as particular cases. The exact time-dependent-potential free-surface flow equations are given by (2.102)–(2.105). We rewrite these equations by choosing the origin of y on the bottom. This gives φxx + φyy = 0,
0 < y < h + η,
(5.116)
φy = 0 on y = 0, ηt + φx ηx − φy = 0
(5.117)
on y = h + η,
ηxx 1 T =C gη + φt + (φ2x + φ2y ) − 2 ρ (1 + ηx2 )3/2
on
y = h + η,
(5.118) (5.119)
where h is the depth of the fluid. Here we have written the elevation of the free surface as y = h + η, where h is the undisturbed depth. We introduce the velocity scale c0 = (gh)1/2 and denote the typical amplitude of η by a. We also define the amplitude parameter a α= (5.120) h and the depth parameter h2 β= 2. (5.121) l Next we rescale the variables as x y c0 x ˜ = , y˜ = , t˜ = t, (5.122) l h l
5.2 The Korteweg–de Vries equation
η˜ =
η , a
c0 φ˜ = φ. gla
143
(5.123)
That the scalings in the x- and y- directions in (5.122) are different is crucial in deriving shallow-water approximations. We now rewrite the nonlinear equations (5.116)–(5.119) in terms of the new variables (5.122) and (5.123). After dropping the tilde this leads to βφxx + φyy = 0, φy = 0 ηt + αφx ηx −
0 < y < 1 + αη, on y = 0,
1 φy = 0 on y = 1 + αη, β
(5.124) (5.125) (5.126)
1 1α 2 ηxx φy − τ β = 0 on y = 1 + αη, (5.127) η + φt + αφ2x + 2 2β (1 + α2 βηx2 )3/2 where τ=
T . ρgh2
We seek φ in the form of an expansion in powers of y. Thus we write φ(x, y, t) =
∞
y n fn (x, t).
(5.128)
n=0
Substituting (5.128) into (5.124) and (5.125) yields fn = 0 fn = −
for n = 1, 2, 3, . . . ,
∂ 2 fn−2 β , n(n − 1) ∂x2
n = 2, 4, 6, . . .
(5.129) (5.130)
Solving (5.130) recursively gives φ=
∞ n=0
(−1)n
y 2n ∂ 2n f n β , (2n)! ∂x2n
(5.131)
where f = f0 .
(5.132)
Substituting (5.131) into the boundary conditions (5.126) and (5.127) gives ηt + [(1 + αη)fx ]x − [ 16 (1 + αη)3 fxxxx + 12 α(1 + αη)2 ηx fxxx ]β + O(β 2 ) = 0, (5.133)
144
Nonlinear waves – asymptotic solutions 2 η + ft + 12 αfx2 − 12 (1 + αη)2 (fxxt + αfx fxxx − αfxx )β ηxx + O(β 2 ) = 0. −τ β (1 + α2 βηx2 )3/2
(5.134)
If all terms of order β are dropped and (5.134) is differentiated with respect to x, we obtain ηt + [(1 + αη)w]x = 0,
(5.135)
wt + αwwx + ηx − τ βηxxx = 0,
(5.136)
w = fx .
(5.137)
where
Equations (5.135) and (5.136) are the shallow-water equations. They define a hyperbolic system of partial differential equations that does not admit travelling waves (see Whitham [195]). The Korteweg–de Vries equation with the effects of surface tension included can be derived from (5.133) and (5.134) by specialising to waves moving to the right. To lowest order in α and β (i.e. to order α0 and β 0 ), (5.135) and (5.136) reduce to ηt + wx = 0,
(5.138)
wt + ηx = 0
(5.139)
and a solution moving to the right is w = η,
ηt + ηx = 0.
(5.140)
Following Whitham [195], we seek solutions correct to order α and order β in the form w = η + αA + βB + O(α2 + β 2 ).
(5.141)
Here A and B are functions of η and its derivatives. Equations (5.133) and (5.134) become (5.142) ηt + ηx + α(Ax + 2ηηx ) + β Bx − 16 ηxxx + O(α2 + β 2 ) = 0, ηt + ηx + α(At + ηηx ) + β Bt − 12 ηxxt − βτ ηxxx + O(α2 + β 2 ) = 0. (5.143) Since ηt = −ηx + O(α, β), we can replace the t-derivatives by minus the x-derivatives in the first-order terms and rewrite (5.143) as ηt +ηx +α(−Ax +ηηx )+β −Bx + 12 ηxxx −βτ ηxxx +O(α2 +β 2 ) = 0. (5.144)
5.2 The Korteweg–de Vries equation
145
Equations (5.142) and (5.144) are consistent if the coefficients of α and β in both equations are the same. This yields Ax + 2ηηx = −Ax + ηηx ,
(5.145)
Bx − 16 ηxxx = −Bx + 12 ηxxx − τ βηxxx .
(5.146)
Integrating (5.145) and (5.146) gives A = − 14 η 2 , B = 13 − 12 τ ηxx .
(5.147) (5.148)
Substituting (5.147) and (5.148) into (5.144) gives the Korteweg–de Vries equation, ηt + ηx + 32 αηηx + 16 (1 − 3τ )βηxxx + O(α2 + β 2 ) = 0.
(5.149)
We can now rewrite (5.149) in terms of the unscaled dimensional variables (see (5.120)–(5.123)) as 3 c0 1 (5.150) ηηx + c0 h2 (1 − 3τ )ηxxx = 0. 2h 6 We construct travelling-wave solutions of (5.150) by assuming that ηt + c0 ηx +
η = hζ(X),
where X = x − U t.
(5.151)
The function η(X) represents a wave travelling to the right with constant velocity U . Substituting (5.151) into (5.150) gives the ordinary differential equation 3 1 − hU ζ + c0 hζ + c0 hζζ + c0 h2 (1 − 3τ )hζ = 0, (5.152) 2 6 where the primes denote derivatives with respect to X. Integrating (5.152) and dividing by c0 h yields U 1 2 3 2 h (1 − 3τ )ζ + ζ − − 1 ζ + G = 0, (5.153) 6 4 c0 where G is a constant of integration. Multiplying (5.153) by ζ and integrating again gives U 1 2 2 3 (1 − 3τ )h ζ + ζ − 2 − 1 ζ 2 + 4Gζ + J = 0, (5.154) 3 c0 where J is another constant of integration. Equation (5.154) admits periodic travelling solutions. These were calculated analytically by Korteweg and de Vries [91] (see also [195] and [191]).
146
Nonlinear waves – asymptotic solutions
These solutions are called cnoidal waves because they are expressed in terms of the Jacobian elliptic function cn. As the ratio of their wavelength and the depth h tends to infinity, the cnoidal waves approach solitary waves. These solitary waves consist of a single hump or a single depression, depending on the value of the parameter τ . As x → ±∞, η and its derivatives tend to zero. It then follows that G = J = 0, and (5.154) reduces to U 1 2 2 3 (1 − 3τ )h ζ + ζ − 2 − 1 ζ 2 = 0. (5.155) 3 c0 It can easily be checked that the solution of (5.155) is then ζ=a ˜ sech
2
where
3˜ a 2 4h (1 − 3τ )
a ˜=2
1/2 X,
U −1 . c0
(5.156)
(5.157)
When τ < 1/3, a ˜ > 0 and (5.156) is an elevation wave with U > c0 . The value of ζ increases from ζ = 0 at X = ∞, rises to a maximum ζ = a ˜ and then returns symmetrically to ζ = 0 at X = −∞. When τ > 1/3, a ˜ < 0 and (5.156) is a depression wave with U < c0 . The value of ζ decreases from ζ = 0 at X = ∞, reaches a minimum ζ = a ˜ and then returns symmetrically to ζ = 0 at X = −∞. The solution (5.156) predicts that dζ/dX becomes unbounded as τ → 1/3. This is due to the fact that the dispersive term ηxxx in (5.150) disappears when τ = 1/3. We note that in the expansion procedure leading to (5.150) it was assumed that α and β are both small and of the same order of magnitude, i.e. α = , β = where 0 < 1. To obtain a model equation valid near τ = 1/3, we need to include higher-order dispersive terms. This can be achieved by assuming that α = 2 ,
β=
(5.158)
and expanding τ near 1/3 by writing τ=
1 + τ1 + · · · 3
(5.159)
The resulting equation rewritten in terms of the dimensional variables is ηt + c0 ηx +
3 c0 1 c0 h4 ηηx + c0 h2 (1 − 3τ )ηxxx + ηxxxxx = 0. 2h 6 90
(5.160)
5.2 The Korteweg–de Vries equation
147
This is known as the fifth-order Korteweg–de Vries equation. It was derived by Hunter and Vanden-Broeck [76] in the steady case and by Hunter and Scherule [75] in the unsteady case (see also [83]). An important question is whether there are fully nonlinear solutions consistent with (5.156) when their amplitude is small. We shall see in Chapter 6 that the answer is positive when τ = 0 or τ > 1/3. However, there are no fully nonlinear solutions of small amplitude consistent with (5.156) when 0 < τ < 1/3. The fully nonlinear solutions are then characterised by a train of ripples in the far field. Such waves are often referred to as generalised solitary waves, to distinguish them from true solitary waves, which are flat in the far field.
6 Numerical computations of nonlinear water waves
6.1 Formulation We consider again a train of periodic waves like that shown in Figure 2.4. Suppose that the waves have wavelength λ and propagate to the left in a channel bounded below by a horizontal bottom. We take a frame of reference moving with the wave and seek steady solutions. We will present the numerical methods of interest in terms of cartesian coordinates with x = y = 0 at a crest of the wave (see Figure 6.1). Some alternative choices for the origin of coordinates will be used in Sections 6.4 and 6.5. Gravity is taken as acting in the negative y-direction. ψ=0
ψ = −Q
y A
x
C
B
λ
B'
ψ = −2Q
A'
C'
Fig. 6.1. A wave of wavelength λ travelling in a channel bounded below by a horizontal bottom. A frame of reference moving with the wave is chosen. The free surface ψ = 0, the bottom ψ = −Q and the image of the free surface ψ = −2Q are shown.
The potential function φ and the streamfunction ψ were introduced in Section 2.3. We choose φ = 0 at x = y = 0 and ψ = 0 on the free surface 148
6.1 Formulation
149
and denote by −Q the constant value of ψ on the horizontal bottom and by u and v the horizontal and vertical components of the velocity. As in Section 2.4 and Chapter 5, we define the phase velocity as the average horizontal velocity at a constant level of y in the fluid. Using (5.6), we obtain 1 1 λ 1 λ 1 c= u(x, y)dx = φx dx = [φ(λ, y) − φ(0, y)] = φ(λ, y). (6.1) λ o λ 0 λ λ Therefore φ(λ, y) = cλ and it follows from the assumed periodicity and symmetry of the wave that nλ nλ , y = c , n = 0, ±1, ±2, . . . (6.2) φ 2 2 Following Stokes [144] and the analysis in Chapter 3, we will use the potential function and the streamfunction as independent variables. We define the complex potential f = φ + iψ. The kinematic boundary condition on the horizontal bottom can then be satisfied by using the method of images. Thus we reflect the flow in the bottom (see Figure 6.1). The flow configuration in the complex potential plane is shown in Figure 6.2: it is the strip −∞ < φ < ∞, −2Q < ψ < 0. ψ
ψ=0 A
B
C
A'
B'
C'
φ
ψ = −2Q
Fig. 6.2. The flow configuration of Figure 6.1 in the complex potential plane.
As noted in Chapter 3, the obvious advantage of working in the complex f -plane is that the unknown free surface and its image in Figure 6.1 have been mapped onto the known boundaries ψ = 0 and ψ = −2Q.
150
Numerical computations of nonlinear water waves
We define the function δ + iβ by the relations δ + iβ =
1 = xφ + iyφ . u − iv
(6.3)
Since u − iv is an analytic function of f , δ + iβ is also an analytic function of f . Next we map the f -plane into the unit disk in the complex t-plane by the transformation t = e−2iπf /cλ = e−2iπφ/cλ e2πψ/cλ .
(6.4)
The flow configuration in the t-plane is shown in Figure 6.3.
B
B'
C' A'
C A
Fig. 6.3. The flow configuration of Figures 6.1 and 6.2 in the complex t-plane. The solid curve |t| = 1 corresponds to the free surface and the broken curve |t| = r02 to the image of the free surface.
The free surface is mapped into the circle |t| = 1, the bottom into the circle |t| = e−2πQ/cλ and the image of the free surface into the circle |t| = e−4πQ/cλ . To compute solutions, we need to express the fact that δ +iβ is an analytic function of t in the annulus r02 < |t| < 1, where r0 = e−2πQ/cλ .
(6.5)
There are two methods for doing this. The first is to represent δ + iβ as a Laurent expansion in powers of t. This leads to the numerical procedure we call series truncation. The second is to apply the Cauchy integral formula to the function δ + iβ in the annulus of Figure 6.3. This leads to the boundary integral equation method. Both methods were introduced in Chapter 3. They are described within the framework of water waves in Sections 6.2 and 6.3 respectively.
6.2 Series truncation method
151
6.2 Series truncation method The function δ + iβ is an analytic function of t in the annulus r02 < |t| < 1. Therefore it can be represented by the Laurent expansion δ + iβ = a0 + = a0 +
∞ n=1 ∞
an tn +
∞
bn t−n
n=1
an e−2iπnf /cλ +
n=1
∞
bn e2iπnf /cλ .
(6.6)
n=1
Since ψ = −2Q is the image of the free surface ψ = 0 in the bottom we have δ(φ, −2Q) + iβ(φ, −2Q) = δ(φ, 0) − iβ(φ, 0),
(6.7)
and it follows from (6.6) that bn = an r02n ,
n = 1, 2, . . .
(6.8)
Furthermore (6.1) implies that 1 a0 = . c
(6.9)
Substituting (6.8) and (6.9) into (6.6) gives ∞
∞
n=1
n=1
1 an e−2iπnf /cλ + an r02n e2iπnf /cλ . δ + iβ = + c
(6.10)
We shall determine coefficients an in (6.10) such that the dynamic boundary condition (5.3) is satisfied. To do so, we need to rewrite (5.3) in terms of δ and β. Using (3.3), (3.6) and (6.3) we obtain φ 1 1 T δ˜β˜φ − δ˜φ β˜ ˜ +g = B, (6.11) β(ϕ)dϕ − 2 δ˜2 + β˜2 ρ (δ˜2 + β˜2 )3/2 0 ˜ ˜ where B is the Bernoulli constant and δ(φ) = δ(φ, 0) and β(φ) = β(φ, 0) denote the values of δ and β on the free surface ψ = 0. In the remaining part of this section, we introduce dimensionless variables by using λ as the unit length and c as the unit velocity. In terms of the dimensionless variables, (6.11) becomes 1 2π φ ˜ κ δ˜β˜φ − δ˜φ β˜ 1 + = B, (6.12) β(ϕ)dϕ − 2 δ˜2 + β˜2 µ 0 2πµ (δ˜2 + β˜2 )3/2 where κ and µ are defined by (5.67) and (5.112) respectively, and (6.10)
152
Numerical computations of nonlinear water waves
becomes δ + iβ = 1 +
∞
an e−2iπnf +
n=1
∞
an r02n e2iπnf .
(6.13)
n=1
We truncate the infinite series in (6.13) after N − 1 terms and determine the N + 1 unknowns B, µ and an , n = 1, . . . , N − 1, by collocation. Thus we introduce the N collocation points φI =
1 I −1 , 2N −1
I = 1, . . . , N,
(6.14)
and satisfy the dynamic boundary condition (6.12) at these points. This gives N nonlinear algebraic equations. The final equation is obtained by fixing the amplitude of the wave, for example by imposing 1/2 ˜ β(ϕ)dϕ = −s, (6.15) 0
where s is given and is called the steepness of the wave. It is defined as the difference in height between a crest and a trough of the wave profile divided by the wavelength. In the particular case of water of infinite depth, r0 = 0 and (6.8) implies bn = 0, n = 1, 2, . . . The Laurent series (6.13) reduces then to the Taylor series ∞ ∞ an tn = an e−2iπnf , (6.16) δ + iβ = n=0
n=0
where a0 = 1. The representation (6.16) can be derived directly by noting that when r0 = 0, (6.4) maps the flow domain into the unit circle 0 < |t| < 1 of the t-plane. Therefore δ + iβ can be represented by the Taylor expansion (6.16). Various variations of the series truncation method have been proposed. For example, Vanden-Broeck [172] calculated waves in water of infinite depth by expanding the complex velocity w = u − iv instead of δ + iβ in powers of t, i.e. by writing ∞ cn e−2iπnf . (6.17) w =1+ n=1
6.3 Boundary integral equation method Instead of using the series representation (6.10), we now derive a relation between δ and β by using Cauchy integral formula (see (2.38)). Such an
6.3 Boundary integral equation method
153
approach was used in Chapter 3 to compute cusped cavities (see Section 3.1.2.2). The presentation in this section follows [135], [162] and [76]. We apply the Cauchy integral formula to the function δ + iβ in the complex t-plane with the contour C chosen as the boundaries of the annulus in Figure 6.3. This yields δ(t) + iβ(t) 1 dt. (6.18) δ(t0 ) + iβ(t0 ) = − iπ C t − t0 The contour C consists of the circle |t| = 1 oriented clockwise and of the circle |t| = r02 oriented anticlockwise. Here t0 is assumed to be on the unit circle |t| = 1 of Figure 6.3. Therefore the integral in (6.18) is a Cauchy principal value. Applying (6.4) with ψ = 0 as a change of variables and using (6.7), we can rewrite (6.18) as
ξ 1 e−iπϕ/ξ ˜ ˜ ˜ ˜ δ(φ) + iβ(φ) = [δ(ϕ) + iβ(ϕ)] dϕ ξ e−iπϕ/ξ − e−iπφ/ξ −ξ ξ 2 e−iπϕ/ξ r 0 ˜ ˜ − r02 [δ(ϕ) − iβ(ϕ)] dϕ , (6.19) 2 e−iπϕ/ξ − e−iπφ/ξ r −ξ 0 where ξ = cλ/2. Taking the real part of (6.19), we obtain the following ˜ ˜ relation between δ(φ) and β(φ):
ξ −iπϕ/ξ e 1 ˜ ˜ ˜ dϕ [δ(ϕ) + iβ(ϕ)] δ(φ) = ξ e−iπϕ/ξ − e−iπφ/ξ −ξ ξ 2 e−iπϕ/ξ r 2 0 ˜ ˜ −r0 dϕ , (6.20) [δ(ϕ) − iβ(ϕ)] r02 e−iπϕ/ξ − e−iπφ/ξ −ξ where denotes the real part. Relations (6.11) and (6.20) define a system of nonlinear integro-differential ˜ ˜ equations for the unknown functions δ(φ) and β(φ). We will solve this system numerically. First we introduce the mesh points cλ cλ (I − 1), I = 1, . . . , N, (6.21) φI = − + 2 N −1 the midpoints φI + φI−1 φm , I = 1, . . . , N − 1, (6.22) I = 2 and the unknowns ˜ I ), I = 1, . . . , N, (6.23) δ˜I = δ(φ ˜ I ), β˜I = β(φ
I = 1, . . . , N.
(6.24)
154
Numerical computations of nonlinear water waves
Since β˜1 = 0 = β˜N = 0 by symmetry, there are only 2N − 2 unknowns δ˜I and β˜I . The integrals in (6.20) can be approximated by the trapezoidal rule (which is spectrally accurate for periodic functions) with ϕ = φJ , J = 1, . . . , N , and φ = φm I , I = 1, . . . , N − 1. The symmetry of the quadrature and of the discretisation enable us to evaluate the Cauchy principal value as if it were an ordinary integral (see Section 3.1.2). This gives N − 1 equations. Next we evaluate the derivatives δ˜φ and β˜φ at the midpoints by centred difference formulae. For example, using two points we have δ˜I+1 − δ˜I , ) = δ˜φ (φm I h
I = 1, . . . , N − 1,
(6.25)
and using four points we have δ˜I−1 − 27δ˜I + 27δ˜I+1 − δ˜I+2 δ˜φ (φm ) = , I 24h
I = 2, . . . , N − 2.
(6.26)
Here h=
cλ 2ξ = N −1 N −1
is the mesh size. We also evaluate δ˜ and β˜ at the midpoints by centred interpolation formulae. For example, using two points we have ˜ ˜ ˜ m ) = δI+1 + δI , δ(φ I 2
I = 1, . . . , N − 1,
(6.27)
and using four points we have ˜ ˜ ˜ ˜ ˜ m ) = −δI−1 + 9δI + 9δI+1 − δI+2 , δ(φ I 16
I = 2, . . . , N − 2.
(6.28)
We note that formulae like (6.26) and (6.28) can be extended for I = 1 and I = N − 1 since δ˜I can be defined for I < 1 and I > N by using the assumed periodicity and symmetry of the wave. Now we need to approximate the integral in (6.11). A simple way to do this is first to define φ ˜ β(ϕ)dϕ. (6.29) Y (φ) = 0
If N is odd we can calculate Y (φI ) by using Y (φI+1 ) = Y (φI ) +
β˜I+1 + β˜I h, 2
I=
N +1 , . . . , N − 1, 2
(6.30)
6.3 Boundary integral equation method
155
and Y (φI−1 ) = Y (φI ) −
β˜I−1 + β˜I h, 2
I=
N +1 N −1 , , . . . , 2, 2 2
(6.31)
where Y (φ(N +1)/2 ) = 0.
(6.32)
A similar formula can be derived when N is even. The values of Y (φm I ) can then be evaluated by interpolation, for example by using the interpolation formula Y (φI ) + Y (φI+1 ) , I = 1, . . . , N − 1. (6.33) Y (φm I )= 2 To describe the numerical procedure further we need to introduce dimensionless variables. There are several possible choices. For example, we could choose Q/c as the unit length and c as the unit velocity. Here, however, we will follow the choice of Section 6.2 and choose λ as the unit length and c as the unit velocity. We then set c = 1 and λ = 1 in (6.20) and use (6.12) instead of (6.11). By satisfying (6.12) and (6.20) at the midpoints (6.22) we obtain 2N −2 algebraic equations for the 2N unknowns δ˜I , I = 1, . . . , N , β˜I , I = 2, . . . , N −1, B and µ. A further equation expresses that the wavelength is λ (here λ = 1): 1 ˜ δ(ϕ)dϕ = 1. (6.34) 0
The final equation fixes the amplitude of the wave, for example by writing 1/2 ˜ β(ϕ)dϕ = −s, (6.35) 0
where s is the steepness. The integrals in (6.34) and (6.35) are evaluated numerically (for example by the trapezoidal rule). The resulting system of 2N nonlinear algebraic equations with 2N unknowns is solved by Newton’s method for given values of κ and s. When r0 = 0, the water is of infinite depth and, using ξ = cλ/2, (6.20) reduces to the simple integral relation cλ/2 1 π 1 ˜ ˜ (6.36) β(ϕ) cot (ϕ − φ) dϕ. δ(φ) = − c cλ −cλ/2 cλ We conclude this section by mentioning that the efficiency of the numerical method can be improved by using the assumed periodicity and symmetry of the waves. The symmetry implies that ˜ ˜ ˜ ˜ β(−ϕ) = −β(ϕ) and δ(−ϕ) = δ(ϕ).
(6.37)
156
Numerical computations of nonlinear water waves
Therefore the integrals in (6.20) and (6.36) can be reduced to integrals from 0 to cλ/2. For example, we can rewrite (6.36) as cλ/2 1 π 1 π ˜ ˜ δ(φ) = − β(ϕ) cot (ϕ − φ) + cot (ϕ + φ) dϕ. (6.38) c cλ 0 cλ cλ We can then solve problems by following the numerical scheme described above but with the mesh points restricted to the interval 0 < φ < cλ/2, i.e. by replacing (6.21) by φI =
cλ (I − 1), 2(N − 1)
I = 1, . . . , N.
(6.39)
6.4 Numerical methods for solitary waves Some solitary waves have already been introduced as solutions of the Korteweg–de Vries equation (see Section 5.2). As we shall see, there are three different types of solitary wave. The first type is a solitary wave with a free-surface profile that approaches monotonically a constant level in the far field (see Figure 6.4).
Fig. 6.4. A solitary wave with monotonic decay to a constant level.
The solution (5.156) of the Kortweg–de Vries equation is an example of a solitary wave of this type. Solitary waves of the second type also have a free-surface profile that approaches a constant level in the far field but with decaying oscillations. Examples of such waves occur when both gravity and surface tension are included. They are described in Section 7.2.2 and an extension to three-dimensional waves is presented in Chapter 10. There are both elevation and depression waves (see Figures 6.5 and 6.6). The third type of solitary wave does not approach a uniform stream in the far field but is characterised by oscillations of constant amplitude (see Figure 6.7). We will refer to these waves as generalised solitary waves to contrast them with true solitary waves, whose profiles approach constant levels in the far field. As we shall see these generalised solitary waves occur when both gravity and surface tension are taken into account.
6.4 Numerical methods for solitary waves
157
Fig. 6.5. An elevation solitary wave with a decaying oscillatory tail.
Fig. 6.6. A depression solitary wave with a decaying oscillatory tail.
There are two approaches to the numerical investigation of solitary waves. The first is to derive schemes to compute them directly. The second is to compute periodic waves by using the schemes outlined in Sections 6.2 and 6.3 and then to take larger and larger values of the wavelength. The first approach works particularly well for solitary waves of the first two types (see Figures 6.4–6.6). The infinite domain −∞ < x < ∞ is then truncated to −A < x < A, where A is a large real number, and the contributions from A < x < ∞ and from −∞ < x < −A are either neglected or approximated by asymptotic solutions. The second approach is more appropriate for computing generalised solitary waves, i.e. solitary waves of the third type (see Figure 6.7). This reason is that no approximations are made about the behaviour of the flow in the far field and we can then be confident that the oscillations in the far field are not generated by the truncation of the domain.
6.4.1 Boundary integral equation methods In this section we follow the first approach and derive a boundary integral equation method to compute directly the solitary waves of Figures 6.4– 6.6. Therefore we assume that the flow approaches a uniform stream with constant velocity U and constant depth H as |x| → ∞. The value −Q of
158
Numerical computations of nonlinear water waves
Fig. 6.7. A generalised solitary wave.
the streamfunction ψ on the bottom is then given by Q = U H.
(6.40)
˜ ˜ To obtain an integral relation between δ(φ) and β(φ) on the free surface, we take the limit λ → ∞ in (6.20). This leads to 1 ˜ δ(φ) − U ˜ ˜ ˜ − φ) + 2Q[δ(ϕ) − 1/U ] 1 ∞ −β(ϕ)(ϕ 1 ∞ β(ϕ) dϕ + =− dϕ. (6.41) 2 2 π −∞ ϕ − φ π −∞ (ϕ − φ) + 4Q To proceed further we need to define dimensionless variables. A natural choice is to take H as the unit length and U as the unit velocity. In terms of these dimensionless variables (6.41) becomes ˜ ˜ ˜ − φ) + 2[δ(ϕ) − 1] 1 ∞ −β(ϕ)(ϕ 1 ∞ β(ϕ) ˜ dϕ + dϕ. δ(φ) − 1 = − 2 π −∞ ϕ − φ π −∞ (ϕ − φ) + 4 (6.42) We also write the dynamic boundary condition (6.11) in dimensionless form as φ δ˜β˜φ − δ˜φ β˜ 1 1 1 ˜ + 2 = B, (6.43) β(ϕ)dϕ −τ 2 δ˜2 + β˜2 F 0 (δ˜2 + β˜2 )3/2 where F =
U (gH)1/2
(6.44)
T ρHU 2
(6.45)
is the Froude number and τ=
is the Bond number, already introduced in Section 2.4.2 (see (2.92)). ˜ Relations (6.42) and (6.43) define an integro-differential system for δ(φ) ˜ and β(φ). It was solved numerically by Hunter and Vanden-Broeck [76] for
6.4 Numerical methods for solitary waves
159
pure gravity solitary waves. Another, similar, scheme was derived by ByattSmith and Longuet-Higgins [25]. Here we will follow the approach in [76] and present a numerical procedure to solve the general problem with both gravity and surface tension included in the dynamic boundary condition. We introduce the N mesh points φI = (I − 1)h,
I = 1, . . . , N,
(6.46)
where h is the interval of discretisation. We also define the midpoints φI + φI+1 , I = 1, . . . , N − 1. (6.47) 2 We satisfy (6.42) and (6.43) at the midpoints (6.47). This leads to 2N − 2 ˜ I ), ˜ I ) and β(φ nonlinear algebraic equations for the 2N +2 unknowns F , B, δ(φ I = 1, . . . , N . The details of the discretisation follow those of Section 6.3. The integrals in (6.42) are approximated by the trapezoidal rule with ˜ m ϕ = φJ , J = 1, . . . , N , and φ = φm I , I = 1, . . . , N − 1. The values of δ(φI ), m m m ˜ ˜ ˜ β(φI ), δφ (φI ) and δφ (φI ) needed to satisfy (6.43) at the mesh points (6.47) are approximated by formulae similar to (6.25)–(6.28). The integral in (6.43) is calculated using (6.29)–(6.33). Four more equations are needed. One is obtained by imposing the symmetry condition φm I =
˜ 1 ) = 0. β(φ
(6.48)
Another equation fixes the amplitude of the wave. Several choices are possible for this; for example the distance between the crest (or trough) and the level of the free surface at infinity can be fixed by writing ∞ ˜ β(ϕ)dϕ = −A, (6.49) 0
where A is given. Here A > 0 for an elevation wave (see Figures 6.4 and 6.5) and A < 0 for a depression wave (see Figure 6.6). An extra equation is obtained by satisfying the dynamic boundary condition (6.43) as |x| → ∞. This leads to A 1 (6.50) B = − 2. 2 F There are also various possible choices for the final equation. One possibility is to relate an unknown on the free surface to unknowns at neighbouring ˜ M) points by an extrapolation formula. For example, we could express β(φ ˜ ˜ in terms of β(φM −1 ) and β(φM −2 ) by a linear extrapolation formula. A variation is to use an extrapolation formula that reflects the fact that θ˜ decays exponentially as |φ| → ∞ (see [76]). The particular choice is not crucial provided that the formulae used become exact in the limit h → 0.
160
Numerical computations of nonlinear water waves
The resulting system of 2N + 2 equations with 2N + 2 unknowns is solved by Newton’s method. Series truncation methods have also been used to compute solitary waves. We will describe one of them in Section 6.6.1.
6.5 Numerical results for periodic waves We describe in this section the numerical computation of nonlinear periodic waves. We examine successively pure capillary waves, pure gravity waves and gravity–capillary waves.
6.5.1 Pure capillary waves (g = 0, T = 0) Numerical solutions for pure capillary waves can be computed using the numerical procedures of Sections 6.2 and 6.3. However, Crapper [37] derived an exact solution for pure capillary waves in water of infinite depth. His work was generalised to water of finite depth by Kinnersley [89]. A simpler derivation of Kinnersley’s solutions was provided by Crowdy [38]. Crapper’s exact solution can be written as z=
4i 1 4i f + − , −2iπf /λc c k 1 + Ae k
(6.51)
2πT 1 − A2 . ρλ 1 + A2
(6.52)
c2 =
The steepness s of the wave is related to the constant A by s=
4A . π(1 − A2 )
(6.53)
Relation (6.52) is a dispersion relation. It reduces to the linear dispersion (2.97) when A → 0. The nonlinear dispersion (6.52) is also consistent with the asymptotic solution (5.82). To check this, we expand (6.52) and (6.53) in powers of A. This yields on the one hand s2 π 2 2πT 2 1− + o(A2 ). (6.54) c = ρλ 8 On the other hand, taking the limits h → ∞, g → 0 in (5.83) gives c2 = −
c0 A21 k 2 . 16
(6.55)
6.5 Numerical results for periodic waves
161
Using (5.43) with g = 0 and h → ∞, (5.48), (5.10) and (6.55) yields 2 π 2 2πT 2 1− + o(2 ). (6.56) c = ρλ 2 The definition (5.46) of implies that = s/2 to leading order. Therefore relation (6.56) agrees with (6.54). Fully nonlinear free-surface profiles are obtained by taking the real and imaginary parts of (6.51). This gives a profile in the parametric form x = x(φ) and y = y(φ). Typical free-surface profiles are shown in Figures 6.8– 6.11. 0.6
0.4
0.2
0
0
0.2
0.4
0.6
Fig. 6.8. Crapper’s free-surface profile for k = 2π. The steepness s = 0.1.
0.6
0.4
0.2
0
0
0.2
0.4
0.6
Fig. 6.9. Crapper’s free-surface profile for k = 2π. The steepness s = 0.55.
For small values of the steepness s, the waves are close to linear sine waves (see Figure 6.8). As s increases the waves develop more rounded crests and
162
Numerical computations of nonlinear water waves 0.6
0.4
0.2
0
0
0.2
0.4
0.6
Fig. 6.10. Crapper’s free-surface profile for k = 2π. The steepness s = 0.73. There is a small trapped bubble at the trough of the wave. 0.8 0.6 0.4 0.2 0
0
0.2
0.4
0.6
0.8
Fig. 6.11. Crapper’s free-surface profile for k = 2π. The steepness s = 0.9. This profile is unphysical because it is self-intersecting.
sharp troughs and ultimately become overhanging near the troughs (see Figure 6.9). A limiting configuration is reached for s = s∗ ≈ 0.73, when the free-surface profile develops a point of contact with itself and a small trapped bubble at the trough (see Figure 6.10). For s > s∗ , (6.51) predicts unphysical self-intersecting free-surface profiles (see Figure 6.11). Vanden-Broeck and Keller [186] computed new physical solutions for s > s∗ . They all have profiles with a point of contact with themselves and a small trapped bubble at their troughs, just like Crapper’s highest wave with s = s∗ . As described at the beginning of Section 3.1.2.2, preventing the self-intersection of the profile (see Figure 6.11) imposes an extra constraint on the solutions. Therefore an extra unknown is needed. This is achieved by finding the pressure P (s) in the trapped bubble as part of the solution. Such
6.5 Numerical results for periodic waves
163
solutions can be computed by an appropriate modification of the boundary integral equation technique of Section 6.3. Details can be found in [186]. The pressure P (s) is found to be an increasing function of s, with P = 0 at s = s∗ (see Figure 6.12). P 1.0
0.5
0.5
1.0
1.5
s
Fig. 6.12. The bubble pressure P (in units of ρc2 ) versus the steepness s for the family of waves computed by Vanden-Broeck and Keller [186]. Taken from J. Fluid Mech. 98, 161–169 (1980). The axis P = 0 corresponds to Crapper’s solution, which is physically meaningful for 0 ≤ s ≤ 0.73 and unphysical for s > 0.73.
The waves exist for s∗∗ < s < s∗ . Here s∗∗ ≈ 0.663. Some typical profiles of the waves and bubbles are shown in Figure 6.13
s = 0.6635
s = 0.7
s = 0.75 s = 1.05
The bubble for s = 0.6635, expanded by a factor of 10
s = 1.4
Fig. 6.13. Free-surface profiles for the family of waves computed by Vanden-Broeck and Keller [186]. Taken from J. Fluid Mech. 98, 161–169 (1980).
The exact solutions of Kinnersley [89] are more complicated than Crapper’s and involve elliptic integrals. Kinnersley solved the more general
164
Numerical computations of nonlinear water waves
problem of waves propagating on a sheet of finite thickness. The flow configuration is shown in Figure 6.14. y ψ=0 Fluid sheet
x ψ=Q
n
Fig. 6.14. A travelling wave on a fluid sheet.
The fluid sheet is surrounded by regions of constant pressure (e.g. air) and gravity is neglected. Dimensionless variables are introduced by choosing the wavelength λ as the unit length and c as the unit velocity. The solutions are then characterised by two parameters. The first is the value Q of the streamfunction on the lower boundary of the sheet (see Figure 6.14). The second is the parameter T . (6.57) W = ρλc2 Kinnersley obtained exact solutions for both symmetric waves (see Figure 6.15) and antisymmetric waves (see Figure 6.16). The symmetric waves satisfy by symmetry the condition φy = 0 on y = 0. Therefore they describe also capillary waves in water of finite depth when the flows of Figure 6.15 are restricted to the domain y > 0. Figures 6.15 and 6.16 show that both symmetric and antisymmetric waves have limiting configurations with trapped bubbles. Solutions for higher values of the amplitude can be obtained by following the approach of Vanden-Broeck and Keller [186] described earlier. An interesting question is whether the solutions of Crapper [37] and Kinnersley [89] are unique. In other words, are there additional branches of solutions? Blyth and Vanden-Broeck [20] showed that the answer is in fact positive. They computed new branches of solutions that bifurcate from the symmetric solution branches. Their numerical procedure follows that of Section 6.2. Typical free-surface profiles for these new solutions are shown in Figures 6.17–6.19. 6.5.2 Pure gravity waves (g = 0, T = 0) Using the asymptotic results of Section 5.1, Stokes [143], [144] noticed that pure gravity waves tend to develop sharp crests and broad troughs as their
6.5 Numerical results for periodic waves 0.8
(a)
(b)
0.8
0.4
165
0.4 0
0
0 1.2
0.5
1.0
1.5
2.0 1.2
(c)
0.8
0
0.4
0
0
0.5
1.0
1.5
2.0
0.5
1.0
1.5
2.0
(d)
0.8
0.4
0
0.5
1.0
x
1.5
2.0
0
x
Fig. 6.15. Symmetric waves for Q = −0.5: (a) W = 0.1013, (b) W = 0.1154, (c) W = 0.129 49, (d) W = 0.141 03. Part (d) shows the limiting configuration with trapped bubbles. Taken from J. Fluid Mech. 507, 255–264 (2004).
amplitude is increased. Furthermore the heights of the crests increase with the amplitude. It follows from (5.3) (with T = 0) that the velocity at the crests decreases as the amplitude increases. This prompted Stokes to conjecture that, as the amplitude increases, the waves ultimately reach a limiting configuration with a stagnation point at their crests. Stokes then showed that the flow near the crest of this limiting configuration is locally the same as the flow inside a corner with an enclosed angle of 120◦ (see Figure 6.20). This conclusion can easily be derived by noticing that the flow of Figure 6.20 is a particular case of the flow of Figure 3.38 for µ2 = −π/6. Satisfying the dynamic boundary condition on GL yields the exact solution (3.162) with µ = 2π/3 and A defined by (3.163), (3.164) and (3.176). In deriving this solution in Chapter 3, we satisfied the dynamic boundary condition on GL but not on HG. However, the symmetry of the flow of Figure 6.20 implies that the dynamic boundary condition is then automatically satisfied on HG by symmetry. The existence of a limiting configuration with a stagnation point at the crest suggests that we should characterise gravity waves by the
166
Numerical computations of nonlinear water waves (a)
0.6
(b)
0.8
0.4 0.4
0.2 0
0
0
0.5
1.0
1.5
2.0
(c)
0 1.2
0.8
0.5
1.0
1.5
2.0
0.5
1.0
1.5
2.0
(d)
0.8
0.4
0.4 0
0
0
0.5
1.0
x
1.5
2.0
0
x
Fig. 6.16. Antisymmetric waves for Q = −0.5: (a) W = 0.1853, (b) W = 2.038, (c) W = 0.2223, (d) W = 0.2426. Part (d) shows the limiting configuration with trapped bubbles. Taken from J. Fluid Mech. 507, 255–264 (2004).
parameter 0 = 1 −
1 ˜ δ(1/2) ˜ c2 δ(0)
(6.58)
˜ instead of the steepness s (see [28] and [172]). Since 1/δ(0) is the speed at the crest of the wave, 0 = 1 for the limiting configuration. Furthermore, 0 → 0 as the steepness s tends to zero since 1/δ˜ → c as s → 0. Therefore the advantage of the parameter 0 is that the range 0 < 0 < 1 of possible values of 0 is known a priori. Similar parameters were used by Chen and Saffman [28] and Vanden-Broeck [162]. For example, Vanden-Broeck [162] used the parameter 1 (6.59) 1 = 1 − 2 ˜ c δ 2 (0) instead of the parameter 0 . It is easily checked that 0 < 1 < 1. Numerical computations of the limiting configurations with a stagnation point at the crest were performed as early as 1883 (see [112]). However, it was not until 1982 that a proof of the existence of waves with a 120◦ angle at their crest was provided (see [5]).
6.5 Numerical results for periodic waves 0.2
(a)
167
(b)
0.1
0.1 0 0
0
0.5
1.0
0
1.5
(c)
0.1
0.5
1.0
1.5
1.0
1.5
(d) 0
0
0
0.5
1.0
x
1.5
0
0.5
x
Fig. 6.17. New free-surface profiles for Q = −0.1: (a) W = 0.2783, (b) W = 0.2794, (c) W = 0.2840, (d) W = 0.2943. Part (d) shows the limiting configuration with trapped bubbles. The vertical scale has been exaggerated to show the trapped bubbles clearly. Taken from J. Fluid Mech. 507, 255–264 (2004).
We first present numerical results for pure gravity waves in water of infinite depth. Results for pure gravity waves in water of finite depth will be described after that. 6.5.2.1 Waves in water of infinite depth The asymptotic results (5.10), (5.76) and (5.83) predict that the speed of a nonlinear gravity wave (i.e. µ) is an increasing function of . A tempting conjecture is then that µ is a monotonically increasing function of that reaches its maximum value for the limiting configuration with a 120◦ angle. However, this is not the case and it was shown in the 1970s (see [133], [101] and [106]) that the values of µ oscillates infinitely often as the limiting configuration is approached. This is illustrated in Figure 6.21, where values of µ versus 0 are shown. The figure shows clearly the first maximum. This maximum is followed by an infinite succession of minima and maxima as 0 → 1. This is a very fine structure and only the first maximum can be seen on the scale of Figure 6.21.
168
Numerical computations of nonlinear water waves 0.2
0.2
(a)
0.1
0.1
0
0
0
0.5
1.0
1.5
(c)
0.2
0 0.2
0.1
0.1
0
0
0
0.5
x
1.0
1.5
(b)
0.5
1.0
1.5
1.0
1.5
(d)
0
0.5
x
Fig. 6.18. New free-surface profiles for Q = −0.1: (a) W = 0.2900, (b) W = 0.2913, (c) W = 0.2977, (d) W = 0.3025. Part (d) shows the limiting configuration with trapped bubbles. The vertical scale has been exaggerated to show the trapped bubbles clearly. Taken from J. Fluid Mech. 507, 255–264 (2004).
Similarly it can be shown that the parameter used in the asymptotic analysis of Chapter 5 oscillates infinitely often as the wave of maximum steepness is approached. In Figure 6.22 we present values of the steepness s versus 0 . These results show that the steepness s is a monotonically increasing function of 0 . Therefore s is a suitable parameter to describe steep waves since there is only one solution for each value of s. However, it is not as convenient as 0 because the maximum steepness (and therefore the range of s) is not known a priori. Typical free-surface profiles for 0 = 0.4, 0.6 and 0.99 are shown in Figure 6.23. The profile corresponding to 0 = 0.99 is close to the limiting configuration with a 120◦ angle at the crest. The results presented in Figures 6.21–6.23 can be computed by using either of the two numerical procedures outlined in Sections 6.2 and 6.3. The boundary integral equation method of Section 6.3 works well for waves of small or moderate amplitude. However, the accuracy deteriorates as the limiting configuration is approached and larger and larger numbers
6.5 Numerical results for periodic waves 0.2
0.2
(a)
0.1
169
(b)
0.1
0
0
0
0.25
0.50
0.75
0
1.00
0.50
0.75
1.00
0.25
0.50
0.75
1.00
(d)
(c)
0.2
0.25
0.2
0.1
0.1
0
0
0
0.25
0.50
x
0.75
0
1.00
x
Fig. 6.19. New free-surface profiles for Q = −0.1: (a) W = 0.2960, (b) W = 0.2990, (c) W = 3083, (d) W = 0.3176. Part (d) shows the limiting configuration with trapped bubbles. The vertical scale has been exaggerated to show the trapped bubbles clearly. Taken from J. Fluid Mech. 507, 255–264 (2004). y π 6
H
G 2π 3
x π 6
L
Fig. 6.20. The local flow near the crest of the highest pure gravity wave.
N of mesh points are required. This is due to the fact that the velocity at the crest decreases and tends to zero as 0 → 1. Since the magnitude of the velocity is |∇φ|, the equally distributed mesh points (6.21) or (6.39) lead to fewer and fewer points near the crest of the wave in the physical (x, y)-plane as 0 → 1. This is particularly bad for accuracy because the curvature at the crest gets larger and larger as 0 → 1. These problems can be overcome by concentrating mesh points near the crest. There are several ways to do
170
Numerical computations of nonlinear water waves 1.20
1.16
1.12
1.08
1.04
1.00
0
0.2
0.4
0.6
0.8
1.0
Fig. 6.21. Values of the parameter µ versus 0 . 0.16
0.12
0.08
0.04
0
0
0.2
0.4
0.6
0.8
1.0
Fig. 6.22. Values of the steepness s versus 0 .
this. Schwartz and Vanden-Broeck [135] used the change of variable φ = νn
(6.60)
where n is an integer greater than 1. In their computations, they chose n = 3 and reformulated the problem in terms of ν. The problem was then solved numerically by using points equally spaced in ν. The change of variables (6.60) concentrates points near the crest in the physical plane and enables computations for values of 0 very close to 1. Chen and Saffman [28] used another change of variable, ξ¯ sin 2πν , φ = cλ ν − 2π
(6.61)
6.5 Numerical results for periodic waves
171
0.8
0.6
0.4
0.2
0 0
0.2
0.4
0.6
Fig. 6.23. Typical free-surface profiles for 0 = 0.4, 0.6 and 0.99 (respectively the bottom, middle and top lines).
where the variable ν and the parameter ξ¯ are between 0 and 1. They then used equally spaced points in ν and concentrated mesh points near the crest by choosing ξ¯ very close to 1 (for example ξ¯ = 0.99 or even ξ¯ = 0.999). The advantage of (6.61) over (6.60) is that variables that are periodic in φ, with period cλ, are still periodic in ν, with period 1. The series truncation method of Section 6.2 also gives accurate results for waves of small and moderate amplitude. For the limiting configuration, the flow near the crest at f = 0 is a flow inside a 120◦ angle, and (3.19) implies that w ≈ f 1/3
as
f → 0.
(6.62)
Since the crests are mapped to t = 1 under the transformation (6.4), (6.62) implies that w ≈ (1 − t)1/3
as
t → 1.
(6.63)
Because of the singularity of (6.63) at t = 1, we cannot expect the expansions (6.16) or (6.17) to converge when 0 = 1 (i.e. for the limiting configuration). Also, we can expect these expansions to converge more and more slowly as 0 → 1. Michell [112], Olfe and Rottman [118], Vanden-Broeck [172] and VandenBroeck and Miloh [188] calculated the wave of maximum steepness by writing
∞ (6.64) dn e−2inπf , w = (1 − t)1/3 1 + n=1
172
Numerical computations of nonlinear water waves
where t is defined by t = e−2iπf . The expansion (6.64) satisfies (6.63) and is therefore convergent. The philosophy here is similar to that used in Chapter 3: the singularities of w in the unit circle |t| ≤ 1 are removed by writing w in the form (3.12), where G(t) contains all the singularities of w. In this case G(t) = (1 − t)1/3 , since w is not analytic at t = 1. The expansion (6.64) leads to very accurate results. In particular it predicts the value µ = 1.1931 for the dimensionless wave speed. Havelock [70] and Vanden-Broeck [172] calculated waves of arbitrary amplitude up to the limiting configuration by expressing w as
∞ (6.65) gn e−2inπf w = (1 − βt)1/3 1 + n=1
and finding the coefficients gn and β by series truncation and collocation. By taking the cube of (6.17), (6.64) and (6.65), we see that these three expressions are particular cases of w3 = 1 +
∞
fn e−2iπnf
(6.66)
n=1
for appropriate choices of the coefficients fn . Therefore gravity waves of arbitrary amplitude (including the highest) can also be calculated by using (6.66) and series truncation. This approach was used by Vanden-Broeck and Miloh [188]. We conclude this section by asking whether there are other solution branches. As in Section 6.5.1, the answer is positive. Chen and Saffman [28] discovered new branches that bifurcate from the solutions described above. We will refer to the solutions described above as the basic branches. The new solutions can be calculated as follows. We first recompute the basic branch by defining the wavelength as a multiple of the fundamental wavelength (here the fundamental wavelength refers to the smallest value of λ for which (5.4) and (5.5) are satisfied). We then choose λ as the unit length. As an example, Figure 6.24 shows a solution with the wavelength chosen as twice the fundamental wavelength. Since the wavelength is taken as the unit length, the distance between every second crest is 1. We then follow the solution branch associated, for example, with the solution of Figure 6.24 by the boundary integral equation method of
6.5 Numerical results for periodic waves
173
0.04
0.02
0
0
0.2
0.4
0.6
0.8
1.0
Fig. 6.24. Free-surface profile on the basic solution branch. The wavelength was chosen as twice the fundamental wavelength. This solution corresponds to the bifurcation point.
Section 6.3, using the solution in Figure 6.24 as the initial guess in the Newton iterations, together with continuation. This means that a previously computed solution is used as the initial guess to compute a new solution for a slightly smaller or larger value of the steepness. Following the general discussion of Newton’s method (see (3.66)–(3.68)), we look for possible bifurcation points by monitoring the sign of the determinant of the Jacobian matrix. Chen and Saffman [28] identified such a bifurcation point, and the solution shown in Figure 6.24 in fact corresponds to this bifurcation point. The next step is to compute the bifurcating branches. Chen and Saffman [28] used a general numerical method developed by Keller [84] to move from the solution of Figure 6.24 to the new branches. Here we use a simpler approach, which consists of using the solution of Figure 6.24 as the initial guess and replacing the amplitude equation (6.35) or (6.58) by Y (0) − Y (0.5) = γ,
(6.67)
where Y (φ) is defined by (6.29) and γ is given. Figures 6.25 and 6.26 show two computed solutions, with γ > 0 and γ < 0 respectively. As |γ| increases the waves ultimately approach the limiting configuration with a 120◦ angle, at x = 0 and x = 1 for γ > 0 and at x = 0.5 for γ < 0. Chen and Saffman [28] and Saffman [130] computed further solutions by starting with basic solutions in which the wavelength is n times the fundamental wavelength, for n > 2. The existence of these new branches of waves is related to the presence of the first maximum, shown in Figure 6.21. This maximum implies that two
174
Numerical computations of nonlinear water waves 0.04
0.02
0
0
0.2
0.4
0.6
0.8
1.0
Fig. 6.25. Free-surface profile for a solution on the bifurating branch with γ > 0.
0.04
0.02
0
0
0.2
0.4
0.6
0.8
1.0
Fig. 6.26. Free-surface profile for a solution on the bifurating branch with γ < 0.
waves of different amplitudes can travel at the same speed. As mentioned in Section 5.1.2, this phenomenon occurs for linear gravity–capillary waves. In that case linear superposition leads to new solutions (see (5.89) and (5.90)). Although linear superposition is not applicable for nonlinear solutions, the new solutions of Figures 6.25 and 6.26 can be roughly interpreted in that way. This suggests that further bifurcation points might be associated with the infinite sequence of maxima and minima of µ as 0 → 1. This was confirmed by the calculations of Vanden-Broeck [162], who identified a bifurcation point, between the first maximum and the first minimum, leading to solutions similar to those of Figures 6.25 and 6.26.
6.5 Numerical results for periodic waves
175
6.5.2.2 Waves in water of finite depth All the computations and results presented in the previous subsection extend to the case of finite depth. In particular, waves in water of finite depth also have a limiting configuration with a 120◦ angle at their crests and values of µ oscillating infinitely often as 0 → 1. For a given value of r0 (i.e. of the depth), the waves approach the linear waves of Section 2.4 as 0 → 0. However, a new feature of finite depth is that for any given value of 0 (no matter how small) the waves deviate from the linear waves of Section 2.4 as r0 approaches 1 (i.e. as the depth tends to zero). This behaviour is consistent with the nonuniformity of the expansions of Section 5.1 as h → 0 (see the end of Section 5.1). It is also consistent with the asymptotic analysis of Section 5.2: the numerical calculations show that the waves (with 0 small) approach the cnoidal waves mentioned in Section 5.2 as r0 → 1. For r0 = 1, these waves become solitary waves. Vanden-Broeck [162] showed that the results of Chen and Saffman [28] can be extended to finite depth and that there are again solution branches that bifurcate from the basic branches. These results can be described as follows. Using the notation in [162] we characterise the amplitude of the waves by the parameter 1 (see (6.59)) instead of 0 . In Figures 6.27 and 6.28 we present values of τ∗ =
c2 c20
(6.68)
versus 1 for r02 = 0.4 and r02 = 0.8. Here c is the nonlinear wave speed and c0 =
g k
1/2 tanh kh
is the phase speed corresponding to linear waves (see (2.83)). In these figures, the solid curves correspond to the basic solution branch (see Figure 6.24 and the associated discussion for a definition of the basic branch). The broken curves are the bifurcating branches. A typical freesurface profile on the bifurcating branch for r02 = 0.4 is shown in Figure 6.29.
6.5.3 Gravity–capillary waves (g = 0, T = 0) The analysis of Section 5.1 illustrates the nonuniqueness of gravity–capillary waves when the condition (5.58) is satisfied for some integer value of m.
176
Numerical computations of nonlinear water waves 0.24
0.23
0.22
0.85
0.90
0.95
1.0
1
Fig. 6.27. Values of the parameter τ ∗ versus 1 for r02 = 0.4. Taken from Phys. Fluids 26, 2385–2387 (1983). 0.48 0.47 0.46 0.45
0.85
0.90
0.95
1.0
1
Fig. 6.28. Values of the parameter τ ∗ versus 1 for r02 = 0.8. Taken from Phys. Fluids 26, 2385–2387 (1983).
For example, (5.106) and (5.107) predict two different solutions in water of infinite depth when m = 2. The numerical computations of Schwartz and Vanden-Broeck [135], Chen and Saffman [29] and Hogan [74] show that there are indeed many different families of solutions. We illustrate these results by considering first gravity–capillary waves in water of infinite depth. Results for water of finite depth will be presented later. 6.5.3.1 Waves in water of infinite depth We use λ as the unit length and c as the unit velocity. The gravity–capillary waves are characterised by the three parameters κ, µ (see (5.67) and (5.112))
6.5 Numerical results for periodic waves
177
0.04 0.03 0.02
y
0.01 0
0.2
0.4
0.6
0.8
1.0
x
Fig. 6.29. Computed free-surface profile for a wave on the bifurcating branch for r02 = 0.4. Taken from Phys. Fluids 26, 2385–2387 (1983).
and the steepness s. Using these parameters and assuming infinite depth we can rewrite the linear solutions (5.57) and (5.53) as s η(x) = cos 2πx, (6.69) 2 µ = 1 + κ.
(6.70)
These solutions hold for s sufficiently small provided that the condition (5.55) is satisfied. We recall that in water of infinite depth (5.55) takes the simple form 1 (6.71) κ = , n where n > 1 is an integer. When (6.71) is not satisfied for some value n = m, i.e. when 1 , (6.72) m the results of Section 5.1 shows that several solutions are possible. For example when m = 2 (i.e. κ = 0.5), there are two solutions, described by (5.106) and (5.108). In terms of the dimensionless variables, these solutions can be written as s s (6.73) η(x) = cos 2πx ± cos 4πx + · · · , 2 4 κ=
3 3 ± πs − (πs)2 + · · · (6.74) 2 4 The above results are valid only for s sufficiently small. We now extend them by fully nonlinear calculations obtained by using the boundary integral equation method of Section 6.3. µ=
178
Numerical computations of nonlinear water waves
Figure 6.30 shows numerical values of µ versus κ for s = 0.03.
2.0
2 1
1.5
4 3
µ
1.0
0.5
0.5
1.0
κ
Fig. 6.30. Values of µ versus κ for s = 0.03. Taken from J. Fluid Mech. 95, 119–139 (1979). The long-broken line corresponds to µ = 1 + κ.
These results show that there are many different families of solutions. Four families, numbered 1 to 4, are shown in Figure 6.30. The long-broken straight line corresponds to the linear solution (6.70). Relations (6.74) predict µ = 1.42 and µ = 1.56 for s = 0.03. The point with coordinates (0.5, 1.42) in Figure 6.30 is close to family 1 whereas the point with coordinates (0.5, 1.56) is close to family 2. This illustrates that the Wilton ripples are members of two different families of solutions (families 1 and 2). The corresponding free-surface profiles are shown in Figure 6.31. Using the notation of Schwartz and Vanden-Broeck [135] we have plotted 2πy versus 2πx. Only half a wavelength is shown in Figure 6.31. Solutions on the other branches of solutions are characterised by a larger number of dimples on their profiles. This is clearly shown in Figure 6.32, where we present free-surface profiles for κ = 0.33 and s = 0.03. Further profiles for other values of κ and s can be found in [135].
6.5 Numerical results for periodic waves
0.10
179
2
0.05
1 0
Fig. 6.31. Free-surface profiles for κ = 0.5 and s = 0.03. Taken from J. Fluid Mech. 95, 119–139 (1979).
0.2
2 0.1
0
1 3
4
Fig. 6.32. Four free-surface profiles for κ = 0.33 and s = 0.03. Taken from J. Fluid Mech. 95, 119–139 (1979).
In Figure 6.33 we plot values of µ versus for κ = 0.5. For small the values of µ agree with (6.74) as expected. 6.5.3.2 Waves in water of finite depth It is convenient to describe the properties of gravity–capillary waves in water of finite depth in terms of the parameters τ , r0 and F defined in (2.92), (6.5) and (2.91) respectively. We define dimensionless variables by taking the undisturbed depth Q/c as the reference length and c as the reference
180
Numerical computations of nonlinear water waves 2
1.5
1.0
1
m 0.5
0.05
0.10
0.15
s
Fig. 6.33. Values of µ versus s for κ = 0.5. The solid curves correspond to the numerical computation and the broken curves to the asymptotic solution (6.74). Taken from J. Fluid Mech. 95, 119–139 (1979).
velocity. In this section the amplitude of the waves is measured by the dimensionless velocity u0 at x = y = 0 (see Figure 6.1). Values of u0 close to 1 correspond to waves of small amplitude. The condition (5.55) is satisfied when τ > 1/3. Periodic waves are then unique and described for small values of s by the expansions of Section 5.1.1. When τ < 1/3, the condition (5.55) is not satisfied for some values of the parameters, and numerical calculations show the existence of many different families of solutions. The situation is then similar to that described in the previous section for waves in water of infinite depth. We examine in more detail the properties of waves with τ < 1/3 for r0 close to 1. Figure 6.34 shows values of F versus l=−
2π ln r0
(6.75)
for τ = 0.24 and u0 = 0.97. Here l is the dimensionless wavelength. There are many different families of waves and three of them are presented, as (a),(b) and (c). Typical free-surface profiles for each family are shown in Figure 6.35. As expected there are dimples on the free-surface profiles, as was found for water of infinite depth. However, for values of r0 close to 1 these dimples tend to concentrate in the troughs of the waves. The results of Figure 6.35 show that as one moves to the right in Figure 6.34, from one family to the next, two crests or two troughs are added to the profiles. For example there are 11 crests and 12 troughs per wavelength on the profile on Figure 6.35(a), 13 crests and 12 troughs per wavelength in the profile of Figure 6.35(b) and
6.6 Numerical results for solitary waves
181
F 1.010
(a)
(b)
(c)
1.008
1.006
30
32
34
36
l
Fig. 6.34. Computed values of the Froude number F versus the wavelength l for periodic waves with τ = 0.24 and u0 = 0.97. Taken from J. Fluid Mech. 134, 205–219 (1983).
13 crests and 14 troughs per wavelength on the profile of Figure 6.35(c). A most interesting question is what happens as one moves further to the right of Figure 6.34 and considers the limit l → ∞ (i.e. r0 → 1). We shall see in Section 6.6.2 that generalised solitary waves are obtained in this limit.
6.6 Numerical results for solitary waves Many of the periodic solutions described in Section 6.5 have nontrivial limits as λ → ∞. These limiting solutions are solitary waves, which belong to one of the three types illlustrated in Figures 6.4–6.7 (i.e. solitary waves with monotonic decay, solitary waves with decaying oscillatory tails and generalised solitary waves.). No solitary waves were found for pure capillary waves (i.e. T = 0, g = 0). In the next two sections, we explore the properties of pure gravity solitary waves and of gravity–capillary solitary waves.
6.6.1 Pure gravity solitary waves In Section 6.5.2.2, we mentioned that periodic gravity waves develop flat troughs for λ/h large. As λ/h → ∞ these waves approach solitary waves. For small values of the amplitude, they agree with the solution (5.156) of the Korteweg–de Vries equation. As the amplitude increases, the waves deviate from (5.156) and ultimately approach the limiting configuration with a 120◦ angle at its crest. An existence proof for solitary waves of finite amplitude was given by Friedrichs [61]. Numerical computations of solitary waves of finite amplitude were performed by many investigators (see Schwartz and
182
Numerical computations of nonlinear water waves 0
(a)
y˜
0
y˜
5
0
15
(b)
0
y˜
10
5
10
0
15
(c)
0
5
10
15
x˜
Fig. 6.35. (a) Computed free-surface profile of a periodic wave with τ = 0.24 and u0 = 0.97. The wavelength is l = 32. (b) Same as (a) but with l = 34. (c) Same as (a) but with l = 36.6. Taken from J. Fluid Mech. 134, 205–219 (1983).
Fenton [134] for a review and Tanaka et al. [149] for more recent references). Here we follow mainly the numerical approach of Hunter and Vanden-Broeck [77] (see also Section 6.4.1). It is found that there is a one-parameter family of solutions. This parameter can be chosen as the quantity A defined in (6.49). However, a better
6.6 Numerical results for solitary waves
183
choice is ω =1−
F2 , δ˜2 (0)
(6.76)
where F is defined by (6.44). This choice is similar to (6.58) and (6.59). ˜ Since 1/δ(0) is the dimensionless speed at the crest, ω = 1 for the limiting ˜ → 1 and F → 1 as A → 0. Therefore (6.76) implies configuration. Also, δ(0) that ω → 0 as A → 0. The advantage of the parameter ω over A is that the range of possible values 0 < ω < 1 is known a priori. We present in Figure 6.36 numerical values of F versus ω for waves close to the limiting configuration (i.e. for ω close to 1). 1.295
b
a c
1.290
x
F 1.285
0.80
0.85
0.90
0.95
1.00
Fig. 6.36. Values of F versus ω. Taken from J. Fluid Mech. 136, 63–71 (1983).
The curve a corresponds to numerical values obtained by the method described in Section 6.4.1. It shows that F is not a monotonic function of ω for ω close to 1. In fact there is an infinite number of maxima and minima as ω → 1 (only the first maximum is shown in Figure 6.36). This behaviour is similar to that already encoutered for periodic waves (see Figure 6.21). The curves c and b in Figure 6.36 correspond to earlier results obtained by Longuet-Higgins and Fenton [105] and by Byatt-Smith and LonguetHiggins [25]. These authors also found the first maximum. A comparison of the curves b and c with the curve a show that the solutions of Byatt-Smith and Longuet-Higgins are more accurate than those of Longuet-Higgins and Fenton. The cross in Figure 6.36 corresponds to the limiting configuration, which will be calculated by series truncation in what follows.
184
Numerical computations of nonlinear water waves
6.6.1.1 A series truncation method for gravity solitary waves We now describe how the series truncation method is used to compute solitary waves up to the limiting configuration. The flow is shown in Figure 6.37. We introduce cartesian coordinates such that the level of the free y
x 0
1.0
2.0
Fig. 6.37. The flow and of the coordinates. The profile is the computed free surface of the highest solitary wave. Taken from J. Fluid Mech. 136, 63–71 (1983).
surface in the far field corresponds to y = 0. As previously, we introduce the complex potential f = φ + iψ and the complex velocity w = u − iv. We choose φ = 0 at the crest and ψ = 0 on the free surface. As |x| → ∞, the flow approaches a uniform stream characterised by a constant velocity U and a constant depth H. We introduce dimensionless variables by taking U as the unit velocity and H as the unit length. On the free surface the Bernoulli equation yields u2 + v 2 +
2 y = 1, F2
(6.77)
where F is defined by (6.44). We map the flow domain in the region |t| < 1 of the complex t-plane by the transformation f=
2 1+t ln − i. π 1−t
(6.78)
The transformation (6.78) maps the bottom of the channel onto the real diameter −1 < t < 1 and the free surface onto the half-circumference |t| = 1 in the upper half of the t-plane. We will use the notation t = reiσ , so that the free surface is described by r = 1 and 0 < σ < π. Hunter and Vanden-Broeck [77] calculated the highest solitary wave by representing the complex velocity w by the expansion 1/3 ∞ 1 + t2 exp A(1 − t2 )2λ + an (t2n − 1) , (6.79) w= 2 n=1
6.6 Numerical results for solitary waves
185
where λ is the smallest positive root of πλ −
tan πλ = 0. F2
(6.80)
The term A(1−t2 )2λ in (6.79) comes from the fact that the complex velocity on the free surface satisfies u − iv ≈ 1 + Ae−πλ|φ|
as
|φ| → ∞.
(6.81)
The constants an and A must satisfy the free-surface condition (6.77). The analysis leading to (6.65) and (6.66) shows that solitary waves of arbitrary amplitude (including the highest) can be calculated by representing w3 as follows: ∞ an t2n−2 . (6.82) w3 = 1 + (1 − t2 )2λ n=1
Alternatively, we can set 1/3 ∞ 1 + βt2 2 2λ 2n w= exp A(1 − t ) + an (t − 1) . 1+β
(6.83)
n=1
Here β is another constant to be found as part of the solution. The expansion (6.79) is similar to the Michell expansion for the periodic wave of largest steepness (6.66) and was used before by Lenau [96]. The factor (1 + t2 )1/3 removes the singularity associated with the 120◦ angle at the crest of the highest wave. The expansions (6.82) and (6.83) are equivalent to the Davies approximation [41] and the Havelock expansion [70] (see Vanden-Broeck and Miloh [188]). As shown by Vanden-Broeck and Miloh [188], equivalent numerical results are obtained by using (6.82) or (6.83). Here we describe results based on (6.83). First we differentiate (6.77) with respect to σ. Then using (6.78) we obtain F 2 [u(σ)uσ (σ) + v(σ)vσ (σ)] −
v(σ) 1 2 = 0. π u2 (σ) + v 2 (σ) sin σ
(6.84)
We will characterise the amplitude of the solitary wave by the parameter ω defined in (6.76). We now truncate the infinite series in (6.82) after N terms and determine the N + 4 unknowns a1 , a2 , . . . , aN , A, β, λ and F 2 by collocation. Thus we introduce the N + 2 collocation points σI =
E + (I − 1)E, 2
I = 1, . . . , N + 2,
(6.85)
186
Numerical computations of nonlinear water waves
where E = π/(2N + 4), and satisfy (6.84) at the collocation points (6.85). This yields N + 2 nonlinear algebraic equations. The final two equations are given by (6.80) and (6.76). Thus for a given value of ω we have a system of N + 4 equations with N + 4 unknowns. This system is solved by Newton iteration. In some calculations, it is more convenient to use a variant of the scheme in which β is fixed and ω is found as part of the solution. As an example we present numerical results for the highest wave. Then we fix ω = 1 (or β = 1 if we use the above-mentioned variant). The scheme is then equivalent to that used by Hunter and Vanden-Broeck [77]. We note that for the highest wave (for which u = v = 0 at the crest), the elevation α of the crest is related to F by the simple relation F2 =
2 α
(6.86)
(see 6.77). Hunter and Vanden-Broeck [77] computed solutions for values of N ≤ 100 and concluded that α = 0.833 22. This estimate can be improved by increasing N . They found the values 0.833 217 02, 0.833 208 77, 0.833 205 44, 0.833 203 15 and 0.833 202 00 for N = 200, 400, 600, 900 and 1200 respectively. An extrapolation for N → ∞ gives the value 0.833 198 6. This value is in close agreement with the value 0.833 197 obtained by Williams [197] and the value 0.833 199 79 obtained by Evans and Ford [53]. The computed profile of the highest solitary wave is shown in Figure 6.37.
6.6.2 Gravity–capillary solitary waves The numerical results of Section 6.5.3.2 suggest that periodic gravity– capillary waves with τ < 1/3 approach generalised solitary waves as l → ∞ (see Figure 6.35). To confirm this idea we repeated the calculations of Figure 6.35 for larger values of l (i.e. for r0 closer to 1) and for various values of u0 and τ . The calculations follow closely Vanden-Broeck [177]. In Figure 6.38, we present values of F versus l for τ = 0.24 and u0 = 0.99. Curves (a) and (b) correspond to two computed families of solutions; corresponding profiles of the waves for these two families are shown in Figures 6.39 and 6.40 respectively. Comparing the profiles in Figures 6.39 and 6.40, we see that the number of inflexion points (and therefore the number of ripples) increases as one moves in Figure 6.38 from one family to another family further to the right. Furthermore it follows from the symmetry of the flow that the last point on the graphs in Figures 6.39 and 6.40 is either a crest or a trough of the ripples. These facts indicate that, for l sufficiently large, there is an infinite
6.6 Numerical results for solitary waves
187
F
1.010 1.008 1.006
(b)
(a)
1.004
×
×
(c)
1.002
96
104
112
120
128
l
Fig. 6.38. Values of the Froude number F versus the dimensionless wavelength l for periodic waves with τ = 0.24 and u0 = 0.99. The solid curves (a) and (b) are the numerical solutions. The broken curves show families obtained by translation. Taken from Phys. Fluids A 3, 263–266 (1991).
number of families of solutions. The corresponding curves in Figure 6.38 can be obtained from any particular curve by translating it horizontally by a multiple of the wavelength of the ripples. Generalised solitary waves are then obtained by jumping from one curve to the next as we take the limit l → ∞. After each jump, two more crests or troughs appear on each wavelength of the profiles, one on the right and one on the left. In the limit l → ∞, we obtain a generalised solitary wave with infinite trains of ripples in the far field. For each value of 0 < τ < 1/3, these generalised solitary waves form a two-parameter family of solutions. The numerical results in Figures 6.38–6.40 are for periodic waves with l > 90. We will use these long waves to approximate generalised solitary waves. The profiles in Figures 6.39 and 6.40 show that the steepness of the ripples (i.e. the difference in height between a crest and a trough of the ripples divided by their wavelength) is small for all the profiles presented. Therefore the dimensionless wavelength L of the ripples satisfies the linear dispersion relation L 2π 4π 2 2 1 + τ 2 tanh (6.87) F = 2π L L (see (2.90)). Starting with curve (a) in Figure 6.38, we used (6.87) to calculate the wavelength L corresponding to each value of F . Then we performed the translations mentioned earlier. The resulting curves are the broken lines in
188
Numerical computations of nonlinear water waves 0.010
0.006
(a)
(b) 0.008
0.004
0.006
0.002
0.004 0.000
0.002 0.000
0
10
20
30
40
50
60
0.010
0
10
20
30
40
50
0.010
(c)
(d)
0.008
0.008
0.006
0.006
0.004
0.004
0.002
0.002
0.000
0.000
0
10
20
30
40
50
0
10
20
30
40
50
0.025
(e)
0.020 0.015 0.010 0.005 0.000
0
10
20
30
40
50
Fig. 6.39. (a) Computed free-surface profiles for a periodic wave with τ = 0.24, u0 = 0.99 and F = 1.0005. Only half a wavelength is shown. (b) Same as (a) but with F = 1.0035. (c) Same as (a) but with F = 1.003 58. (d) Same as (a) but with F = 1.0036. (e) Same as (a) but with F = 1.008. Taken from Phys. Fluids A 3, 263–266 (1991).
Figure 6.38. We note that the 12th broken line coincides within graphical accuracy with curve (b). This constitutes a check on our calculations. The solution corresponding to the profile in Figure 6.39(a) is very close to a train of periodic waves extending from x = −∞ to x = ∞. This shows that the generalised solitary waves bifurcate from a train of periodic waves.
6.6 Numerical results for solitary waves
189
As one moves away from the bifurcation point, one crest of the train of periodic waves is progressively lifted. 0.010
0.010
(b)
(a) 0.008
0.008
0.006
0.006
0.004
0.004
0.002
0.002
0.000
0.000
0
10
20
30
40
50
60
70
0
10
20
30
40
50
60
70
0.010
(c) 0.008 0.006 0.004 0.002 0.000
0
10
20
30
40
50
60
70
Fig. 6.40. (a) Computed free-surface profiles for a periodic wave with τ = 0.24, u0 = 0.99 and F = 1.0038. Only half a wavelength is shown. (b) Same as (a) but with F = 1.003 87. This profile is close to that corresponding to the right-hand cross in Figure 6.38. (c) Same as (a) but with F = 1.003 95. Taken from Phys. Fluids A 3, 263–266 (1991).
Figure 6.39 shows that the amplitude of the ripples first decreases and then increases as one moves along the of solution branch. There is one point on each curve in Figure 6.38 for which the amplitude of the ripples is a minimum. These points are indicated by the crosses in Figure 6.38, and the profile corresponding to the cross on the left is shown in Figure 6.39(c). Within graphical accuracy, the amplitude of the ripples in Figure 6.39(c) is zero and the corresponding solution looks like a true solitary wave (i.e. a wave without ripples in the far field). However, the calculations of Champneys et al. [26] showed that the amplitude of the ripples is always different from zero (although it can be very small) for 9/50 < τ < 1/3. This was also shown theoretically by Sun [146] for τ sufficiently close to 1/3. One feature of the ripples is that their amplitude is an exponentially small function of F − 1; this was shown by exponential asymptotics [147] and
190
Numerical computations of nonlinear water waves
by application of centre-manifold and normal-form theory [97]. For further references see the review [43]. We conclude this chapter by comparing our numerical results with the predictions of the Korteweg–de Vries equation (5.154). The curve (c) in Figure 6.38 corresponds to the periodic solutions of (5.154) (i.e. the cnoidal waves). As l → ∞, curve (c) approches the solitary-wave solution. The solutions of the Korteweg–de Vries equation (see curve (c)) do not have ripples in the far field. However, the above discussion shows that the numerical solutions of the complete nonlinear problem (curves (a) and (b) and the broken curves) always have ripples of nonzero amplitude in the far field. Figure 6.38 shows that the numerical solutions of the complete nonlinear problem (curves (a) and (b) and the broken curves) intersect curve (c) at a discrete set of points. The intersections with curves (a) and (b) are very close to the crosses. Therefore, for u0 close to 1 the solutions for which the amplitude of the ripples is a minimum are closely approximated by the cnoidal wave solutions, although ripples are not predicted for the cnoidal waves.
7 Nonlinear free-surface flows generated by moving disturbances
We now return to the free-surface flow generated by a moving disturbance and extend the results of Chapter 4 to the nonlinear regime. We shall see that the wave trains in the far field (if they exist) are then described by the nonlinear theories of Chapters 5 and 6. Furthermore we will show that the nonuniformities of Figures 4.9 and 4.8 are removed when a nonlinear theory is used. Some nonlinear solutions described in this chapter approach the linear solutions of Chapter 4 as the size of the disturbance approaches zero, while others approach solitary waves. We have organised the results in the following way. In Section 7.1 we present pure gravity free-surface flows (i.e. g = 0, T = 0) in water of finite depth and show in Section 7.1.1 that the nonuniformity of the linear supercritical solutions near F = 1 (see Figure 4.9) is removed when a nonlinear theory is used. Subcritical flows are considered in Section 7.1.2. In Section 7.2 we consider gravity–capillary free-surface flows. Solutions in water of finite depth are described in Section 7.2.1. We show in Section 7.2.2 that the nonuniformity of the linear theory near α = 0.25 (see Figure 4.8) is removed when a nonlinear theory is used. We examine in Section 7.3 the implications of the existence of multiple branches of periodic gravity– capillary waves (see Sections 5.1.2 and 6.5.3) for free-surface flows generated by moving disturbances in water of infinite depth. Qualitatively similar numerical results were obtained for the three types of disturbance shown in Figures 4.1–4.4. Therefore, in each section or subsection we will restrict our attention to one type of disturbance (due to a pressure distribution in Sections 7.1.1, 7.2.2 and 7.3 and due to a submerged object in Sections 7.1.2 and 7.2). 191
192
Nonlinear free-surface flows generated by moving disturbances
7.1 Pure gravity free-surface flows in water of finite depth 7.1.1 Supercritical flows We will assume that the disturbance is a pressure distribution, and we will neglect the effect of surface tension. The flow configuration is shown in Figure 4.4. The fully nonlinear problem is described by equations (4.1)– (4.4) with T = 0. In this section we restrict our attention to supercritical free-surface flows. Therefore the flow approaches a uniform stream with constant velocity U and constant depth H in the far field. We define the Froude number U . (7.1) F = (gH)1/2 Since the flow is assumed to be supercritical, F > 1. We introduce dimensionless variables by taking U as the reference velocity and U 2 /g as the reference length. In terms of the dimensionless variables, the dynamic boundary condition (4.3) (with T = 0) becomes 1 2 P (x) ˜ =B (φ + φ2y ) + y + 2 x ρU 2
on y = η(x).
(7.2)
˜ = B/U 2 . It follows from the choice of the origin of y that B ˜ = 1. Here B In order to compare the nonlinear computations with the linear results of Chapter 4, we assume that the pressure distribution is given by (4.70). Therefore, using the dimensionless variables we write P (x) e−5x . = ρU 2 2 2
(7.3)
Since P (−x) = P (x), the solutions are symmetric with respect to x = 0. We solve the problem numerically by using a boundary integral equation method similar to those used in Sections 3.1.2.2 and 6.4.1. We first define the complex potential f = φ + iψ. We choose ψ = 0 on the free surface and φ = 0 at the point x = 0 on the free surface. The value −Q of ψ on the bottom satisfies 1 Q = 2, (7.4) F where F is defined by (7.1). Next we define the complex function δ + iβ by (6.3). We seek δ + iβ as an analytic function of the complex potential f = φ + iψ. We satisfy the kinematic boundary condition β = 0 on ψ = −Q by reflecting the flow in the bottom surface. Therefore we seek δ + iβ as an analytic function in the strip −2Q < ψ < 0. The values of δ(φ, ψ) and of
7.1 Pure gravity free-surface flows in water of finite depth
193
β(φ, ψ) on the free surface ψ = 0 and on its image ψ = −2Q are related by δ(φ, −2Q) = δ(φ, 0) and β(φ, −2Q) = −β(φ, 0).
(7.5)
We derive an integral equation on the free surface by applying the Cauchy integral formula to the function δ − 1 + iβ in the complex f -plane with a contour consisting of the free surface, its image and two vertical lines at φ = ±∞. Since δ − 1 + iβ → 0 as φ → ±∞, there are no contributions from the two vertical lines at φ = ±∞. The contributions from the free surface and its image give, after taking the real part and using (7.5), ˜ ˜ ˜ − φ) + 2Q[δ(ϕ) − 1] 1 ∞ −β(ϕ)(ϕ 1 ∞ β(ϕ) ˜ dϕ + dϕ. δ(φ) − 1 = − 2 2 π −∞ ϕ − φ π −∞ (ϕ − φ) + 4Q (7.6) ˜ ˜ Here δ(φ) = δ(φ, 0) and β(φ) = β(φ, 0). We can rewrite (7.2) in terms of δ˜ and β˜ as 1 + 2y + 2p(φ) = 1, 2 ˜ δ + β˜2
(7.7)
where p(φ) = and
∞
y=−
e−5φ 2
2
(7.8)
˜ β(ϕ)dϕ.
(7.9)
φ
Comparing (7.3) and (7.8), we see that P (x) has been replaced by p(φ). This change in the nonlinear dynamic boundary condition is compatible with the linear theory of Chapter 4, since φ = x + O() (see (4.7) and (4.8)) implies that p(φ) = p(x) + O(2 ) as → 0. Therefore the nonlinear problem defined by (7.6) and (7.7) reduces formally to that of Chapter 4 in the limit → 0. We introduce the N mesh points φI = −A + 2A
I −1 , N −1
I = 1, . . . , N,
(7.10)
I = 1, . . . , N − 1,
(7.11)
the midpoints φm I =
φI + φI+1 , 2
and the unknowns ˜ I ), δI = δ(φ
˜ I ), βI = β(φ
I = 1, . . . , N.
(7.12)
194
Nonlinear free-surface flows generated by moving disturbances
We now obtain 2N − 2 equations by satisfying (7.6) and (7.7) at the midpoints (7.11). The details of the discretisation follow that used in Sections 6.3 and 6.4.1. We force the free surface to be flat in the far field by imposing the conditions β1 = βN = 0.
(7.13)
This gives two more equations. The final equation fixes the elevation of the free surface at φ = 0: ∞ ˜ β(ϕ)dϕ = a, (7.14) − 0
where a is given