Simon Gabathuler
Pinnacle Studio HD Die große Filmwerkstatt
Version 15
Markt+Technik Verlag
Bibliografische Information der Deutschen Nationalbibliothek Die Deutsche Nationalbibliothek verzeichnet diese Publikation in der Deutschen Nationalbibliografie; detaillierte bibliografische Daten sind im Internet über http://dnb.d-nb.de abrufbar.
Die Informationen in diesem Produkt werden ohne Rücksicht auf einen eventuellen Patentschutz veröffentlicht. Warennamen werden ohne Gewährleistung der freien Verwendbarkeit benutzt. Bei der Zusammenstellung von Texten und Abbildungen wurde mit größter Sorgfalt vorgegangen. Trotzdem können Fehler nicht vollständig ausgeschlossen werden. Verlag, Herausgeber und Autoren können für fehlerhafte Angaben und deren Folgen weder eine juristische Verantwortung noch irgendeine Haftung übernehmen. Für Verbesserungsvorschläge und Hinweise auf Fehler sind Verlag und Herausgeber dankbar. Alle Angaben in diesem Buch dienen ausschließlich der Information über technische Fragen und Softwarefragen. Sie dienen nicht dem Zweck, den Absatz von Waren oder Dienstleistungen zu fördern. Alle Rechte vorbehalten, auch die der fotomechanischen Wiedergabe und der Speicherung in elektronischen Medien. Die gewerbliche Nutzung der in diesem Produkt gezeigten Modelle und Arbeiten ist nicht zulässig. Fast alle Hardware- und Softwarebezeichnungen und weitere Stichworte und sonstige Angaben, die in diesem Buch verwendet werden, sind als eingetragene Marken geschützt. Da es nicht möglich ist, in allen Fällen zeitnah zu ermitteln, ob ein Markenschutz besteht, wird das ®-Symbol in diesem Buch nicht verwendet.
10 9 8 7 6 5 4 3 2 1 13 12 11
ISBN 978-3-8272-4708-7
© 2011 by Markt+Technik Verlag, ein Imprint der Pearson Education Deutschland GmbH, Martin-Kollar-Straße 10–12, D-81829 München/Germany Alle Rechte vorbehalten Lektorat: Birgit Ellissen,
[email protected] Korrektorat: Marita Böhm Herstellung: Elisabeth Prümm,
[email protected] Covergestaltung: Marco Lindenbeck, webwo GmbH (
[email protected]) Satz: Nadine Krumm, mediaService, Siegen (www.media-service.tv) Druck und Verarbeitung: Kösel, Krugzell (www.KoeselBuch.de) Printed in Germany
Inhaltsverzeichnis
1
Vorwort
17
Einleitung
19
Die verschiedenen Programmversionen
19
Digital-Analog-Digital-Konverter
22
Hardware und Optimierung
23
PC-Grundvoraussetzungen Optimierung Festplattenkonfiguration Die Installation
24 26 29 32
Pinnacle Studio HD starten
40
Grundsätzliches für die Arbeit mit Pinnacle Studio HD
40
Pinnacle Studio HD 15 updaten Neue Funktionen
40 41
Neue Funktionen in der Version 15 Neue Funktionen aus Studio 14 gegenüber den älteren Versionen Echtzeit und Rendern
41 42 45
Einführung in Pinnacle Studio HD
47
Das erste Projekt
47
Verzeichnisstruktur auf der Festplatte Projekt erstellen Versionen speichern Projekt umbenennen Wichtige Einstellungen
47 49 51 51 51
Temporäre Daten Projekt automatisch speichern Premium-Inhalt und Premium-Funktionen ausblenden Projektformat
51 53 54 54
5
Inhaltsverzeichnis
Standarddauer für Übergänge, Titel und Bilder Videovorschau Hintergrund-Rendering Surround-Sound-Wiedergabe Musik von CD auslesen Mikrofoneinstellungen Erweiterungen mit Premium-Inhalt
2
6
Importieren
55 56 57 58 59 60 60
63
Importieren von
64
Importieren nach
64
Ordner auswählen Weitere Einstellungen Optionen
65 65 67
Szenenerkennung
67
Überspielen von einer Festplatten- oder Chipkamera
68
Aufnahme von MiniDV-Kamera
72
FireWire Aufnahmequalität Der Timecode Bandsteuerung Start- und Endzeit Wiedergabe-Lautstärke Aufnahme Analoge Aufnahme
72 75 75 77 77 78 78 78
Aufnahmegerät wählen Weitere Einstellungen Aufnahmequalität Aufnahme starten Importieren ab DVD-Video oder Blu-ray
79 80 81 82 82
Stop Motion
84
Schnappschuss
85
Inhaltsverzeichnis
3
Studio HD-Grundlagen
87
Die Bearbeiten-Oberfläche
87
Die Menüleiste Das erweiterte Album Das Storyboard Die Timeline Listen-Ansicht Das Vorschaufenster Die Video-Toolbox Die Audio-Toolbox Speichern
87 88 90 90 91 91 92 94 96
Projekte und Projektdaten Rückgängig und Wiederherstellen Videodateien aus einem Ordner importieren
96 96 97
Importieren von einer Festplatte Albumansicht ändern
97 100
Szenen Dateien Clipvorschau ändern Szenen umbenennen Szene suchen Die Rohmontage
100 100 100 101 101 102
Erstellen der Rohmontage Reihenfolge der Szenen ändern Verwendete Szenen anzeigen Projektcontainer Szenenanzeige verändern Szenen mehrmals verwenden Mehrere Szenen auf einmal in die Storyboard-Ansicht laden Löschen eines Clips Die Größe des Storyboards Wie geht es weiter?
102 103 104 104 105 106 106 107 108 108
7
Inhaltsverzeichnis
4
Der Feinschnitt auf der Timeline Der Aufbau der Timeline
109
Die Zeitleiste Der Timeline-Scrubber Die Spuren Die Titelspur Audiospuren Spuren sperren oder ausschalten Scrubben
110 110 110 111 111 111 111
Timeline-Ansicht vergrößern und verkleinern
112
Vordefinierte Zoomwerte einstellen Clips auf die Timeline legen
113 113
Vorschaubild verändern Die zweite Videospur
115 115
Ändern der Clipreihenfolge
115
Der Schnitt
116
Einen Clip auftrennen und den Anfang oder den Schluss löschen Einem Clip ein Mittelstück entfernen Audio-Scrubbing Schwarze Ränder entfernen Schnitttechniken
116 117 117 118 118
L-Schnitt J-Schnitt Ton bleibt Trimmen
118 119 119 120
Trimmen mittels der Clipeigenschaft Trimmen auf der Timeline Markierungen
121 122 123
Zum nächsten Marker springen Marker benennen Löschen von Markierungen Löschen eines Clips
124 124 125 125
Mehrere Clips auf einmal löschen Alles auf der Timeline löschen
8
109
126 126
Inhaltsverzeichnis
5
6
Übergangseffekte Länge eines Übergangs verändern
130
Standardlänge eines Übergangs Effekte sinnvoll einsetzen
131 132
Übergänge und Titel Effekt ersetzen
133 134
Effekt auf mehrere Clips gleichzeitig anwenden
134
Montagethemen
135
Videos oder Fotos
137
Erweiterte Einstellungen
137
Schriftart anpassen Länge ändern Clip Anzeigedauer anpassen Video trimmen Audio anpassen
7
127
Titel
138 139 139 140 140
143
Standardtitel von Vorlage verwenden
143
Titel anpassen
145
Layout aus einer Vorlage
146
Titelschrift verändern
147
Layout manuell anpassen Oberfläche Konturen Schatten Favoriten Hintergrund eines Titels
149 150 151 151 152 152
Foto als Logo einfügen
155
Erweiterte Funktionen
156
Reihenfolge Weiteren Text einfügen Zeichnen Text oder Elemente verschieben Buchstaben- und Zeilenabstand und Neigung Gruppieren und Verketten
156 156 156 157 158 158
9
Inhaltsverzeichnis
8
Ausrichten Positionieren Kopieren, Einfügen und Löschen Lauf- und Rolltitel
159 159 160 160
Fertige Titel speichern oder öffnen
161
Übergänge in Titelspur
161
Standardlänge eines Titels anpassen
162
Weitere Vorlagen erwerben
162
Titel neu erstellen
163
Motion-Overlaytitel und klassische Overlaytitel Klassische Vollbildtitel und Vollbild-Motiontitel Titel bearbeiten mit der Video-Toolbox
163 163 164
Motion-Titeleditor Titeleditor öffnen
165
Titeleditor
167
Videoclips und Fotos Objekte Textelemente Dauer Textlayout Hintergrund definieren
167 171 171 174 174 178
Hintergrundgrafik oder -video Hintergrundfarbe Objekte animieren
178 179 180
Titelvorschau Effekt löschen Anzeigedauer anpassen Anzeigeposition Reihenfolge ändern Ebene sperren und ausblenden Objekte kopieren, einfügen und löschen
10
165
182 182 182 183 184 186 186
Inhaltsverzeichnis
9
Standbilder und Diashow Einfügen von Standbildern
187
Standardlänge Schwarze Ränder entfernen
189 190
Foto animieren
191
Zoom Pan Bild drehen Rote Augen entfernen
10
Musik und Audiobearbeitung
192 193 193 194
195
Soundeffekte
195
Effekt anwenden Musik
196 196
Audiobearbeitung
197
Lautstärke anpassen Balance und Stereoeffekt Die Audio-Toolbox
198 199 199
Lautstärke Mikrofonaufnahme Audioaufnahme Audio-CD importieren
200 205 208 210
Aufnehmen von einer Audio-CD Automatische Hintergrundmusik
210 211
Audioeffekte
11
187
Die Video-Toolbox
213
217
Einzelbild aufnehmen
217
Standbild aus der Timeline Die zweite Videospur
217 218
Bild-in-Bild
219
Verschieben und Skalieren Transparenz Rand Schatten Auf neue Clips anwenden Zuschnitt
220 220 220 220 221 221
11
Inhaltsverzeichnis
12
Chroma-Key-Funktion
222
Videoeffekte
223
Automatische Farbkorrektur Rauschunterdrückung Stabilisieren Geschwindigkeit Drehen Pan und Zoom Keyframe-Animation
224 225 225 227 228 228 229
Keyframe hinzufügen Keyframe löschen Keyframe verschieben Werte zurücksetzen Die Studio HD Ultimate RTFx-Bibliothek
230 230 231 231 231
HFX Filter Alter Film Buntglas Prägung Softener Weichzeichnen 2D Editor Bewegungsunschärfe Blendenfleck Erdbeben Lupe Wassertropfen Wasserwellen Farbkorrektur Invertieren Posterisieren Schwarz und Weiß Weißabgleich SmartMovie-Funktion
231 232 233 233 233 234 234 234 235 235 236 236 236 237 237 237 238 238 239
Inhaltsverzeichnis
12
13
Disc-Menü (Authoring)
241
Erstellen eines Disc-Menüs
243
Disc-Menü mit einer Vorlage Menü-Typ Kapitel erstellen Kapitel per Drag&Drop Weitere Kapitel Kapitel umbenennen Rücksprung Kapitel löschen Weitere Einstellungen Menüs individuell anpassen
243 244 245 245 246 246 247 247 248 249
Miniaturschaltflächen erstellen Layout einer Schaltfläche verändern Schaltflächen-Varianten Bewegter Hintergrund
249 250 251 252
Filmsequenz als Hintergrund darstellen Hintergrundmusik einfügen
252 253
Disc-Menü-Vorschau
253
Mehrere Menüs miteinander verknüpfen
254
Menüs extern speichern
255
Menü neu erstellen
255
Film erstellen
257
Ausgabe auf CD, DVD oder Blu-ray Disc
258
MPEG-Kompression Einstellungen für das Brennen einer DVD Blu-ray Disc HD-DVD Ausgabe in eine Datei
258 260 261 262 263
Audio AVI DivX Flash-Video MPEG-1 und MPEG-2 MPEG-2 TS
264 264 265 266 267 269
13
Inhaltsverzeichnis
MPEG-4 iPod-kompatibel QuickTime MOV Real Media Sony PSP-kompatibel Windows Media 3GP Datei exportieren Ausgabe auf ein Band
269 270 271 271 272 273 273 274 275
Digitale Ausgabe Analoge Ausgabe Ausgabe und Upload ins Internet
276 278 279
Upload auf YouTube Upload auf Yahoo! Video
14
Projekte weitergeben, sichern und löschen
14
285
Projekte archivieren und wiederherstellen
285
Ein Projekt archivieren Ein Projekt wiederherstellen Filme präsentieren und weitergeben
286 288 290
Filme mit Pinnacle Studio HD exportieren und archivieren Projekte und temporäre Daten löschen
291 292
Keine Ahnung, wo die Dateien sind? Temporäre, Hilfs- oder Render-Dateien löschen Nicht mehr gebrauchte Projekte löschen
15
279 282
Videoformate
292 294 296
297
DV (AVI)
298
MPEG-Videoformat
298
HDV, High Definition
298
AVCHD Vergleich der Formate
300 300
Inhaltsverzeichnis
16
Tipps & Tricks AVCHD in MPEG-2 umwandeln
303
PC-Auslastung überprüfen Filme konvertieren Miniatur-Vorschaubild ändern
303 305 310
Szenen und Bilder im Album suchen
311
Szenen und Bilder im Projekt suchen
312
Content-Ordner öffnen
313
Bild drehen
313
Effekte in Studio HD übernehmen
314
Tastenkürzel
316
Allgemeine Tastenkürzel Studio Benutzeroberfläche Motion-Titeleditor Titeleditor Mehrere Fotos miteinander verlängern/verkürzen
316 317 318 318 319
Video rückwärts laufen lassen
320
Grafiken mit Transparenz
321
Texte ausrichten im Titelgenerator und Disc-Menü-Editor
324
Stand- und Rolltitel gleichzeitig
327
Tipps und Tricks für Fortgeschrittene Audioeffekte für Fortgeschrittene mit VST Plugins VST Plug-ins im Internet finden VST Plugins installieren Kostenlose Videoeffekte installieren
17
18
303
329 329 329 330 331
Inhalt der DVD zum Buch
333
Studio HD Ultimate Demoversion
333
VideoSpin
333
eBook in Farbe
333
VideoSpin
335
Installation
336
Einführung in VideoSpin
339
Videos ins Album laden Schneiden, Trimmen und Löschen
339 341
15
Inhaltsverzeichnis
A
Übergangseffekte Titel Standbilder und Fotos Audio und Musik Film erstellen und exportieren
343 344 345 346 347
Exportieren in eine Datei Internet-Upload
348 349
Pinnacle Studio HD Ultimate- und Ultimate Collection-Plug-ins Red Giant Knoll Light Factory
352
Red Giant ToonIt Roto
353
Red Giant Trapcode Shine-Leuchten
354
Red Giant Trapcode 3DStroke
356
Red Giant Trapcode Particular
357
Magic Bullet Looks
358
Effekte-Vorschau Ultimate-Plug-ins einer älteren Version in Studio 15 übernehmen
362
SoundSoap-Plug-in installieren Musikrestauration mit BIAS SoundSoap Automatisches Entfernen von Störgeräuschen Noise Tuner und Noise Reduction Brummen entfernen Klicks und Knackser entfernen Breitbandrauschen entfernen Enhancement, Verbesserung SoundSoap schließen StageTools MovingPicture installieren Fotos animieren mit StageTools
363 365 365 366 367 367 367 367 367 368 369
Vitascene installieren Die proDAD Vitascene-Übergangseffekte-Bibliothek
373 375
Die proDAD Vitascene-Effekte-Bibliothek
378
Effekt mit Keyframes anpassen
Stichwortverzeichnis
16
351
362
379
381
Vorwort
Liebe Leserin, lieber Leser, Pinnacle Studio HD in der Version 15 bietet vor allem eine stabilere Bearbeitung von AVCHD und neuen Videoformaten. Eine Neuerung sticht besonders hervor, die Archivierungs- und Wiederherstellungsfunktion. Mit dieser lassen sich ganze Projekte und alle verwendeten Videos, Fotos und Musikdateien sichern oder auf einen anderen PC transferieren. Außerdem sind bereits in der Grundausstattung sehr viele Übergangseffekte, Titel- und Menüvorlagen sowie interessante Plug-ins und Effekte enthalten. Um den unterschiedlichen Bedürfnissen der Anwender gerecht zu werden, wird das Programm in drei Versionen ausgeliefert. Deren Möglichkeiten und Unterschiede sind natürlich ebenfalls Thema dieses Buches. Bereits mit der kleinsten Version, Studio HD, können High Definition Videos verarbeitet werden. Ich habe die Entwicklung von Pinnacle Studio intensiv mitverfolgt. Seit Version 7 biete ich zusammen mit meinem Team Schulungen, Workshops und Kurse für Pinnacle Studio und Videoschnittsoftware im Allgemeinen an. Aufbauend auf meiner mehrjährigen Tätigkeit in der Videoindustrie, produziere ich inzwischen selbst professionell Videos. Um für Sie einen möglichst engen Praxisbezug herzustellen, habe ich in diesem Buch alle Funktionen aus meiner Sicht als Filmer beschrieben. Die zum Teil etwas kompliziert anmutenden Funktionen beschreibe und erkläre ich immer so einfach wie möglich. Sie sollen mühelos in die Software einsteigen können. Das Buch dient Ihnen sowohl als Videoworkshop mit Schritt-für-Schritt-Anleitungen als auch als Nachschlagewerk. Für die Arbeit mit diesem Buch sind keine besonderen Voraussetzungen nötig. Sie sollten nur gewisse Grundkenntnisse in Bezug auf Computer und Programmbedienung besitzen und beispielsweise wissen, was mit Drag&Drop gemeint ist, wie man die Maustasten bedient, den Windows-Explorer öffnet und ein neues Verzeichnis erstellt. Auf lange Beschreibungen habe ich verzichtet. Sie können anhand der Abbildungen die jeweiligen Schritte genau nachvollziehen. Es gibt keine unnötigen technischen Tiefen, dafür wird jedem wichtigen Detail Beachtung geschenkt. Damit Sie das Thema eines Kapitels nicht aus den Augen verlieren, erkläre ich nicht immer alle Varianten und Möglichkeiten eines Werkzeugs. Sobald Sie sich mit Pinnacle Studio HD besser auskennen, können Sie meine Erklärungen auf Ihre Anwendung übertragen und die Tools selbst ausprobieren.
17
Vorwort Ich empfehle Ihnen, zuerst an einem Beispielprojekt zu üben, damit Sie die Philosophie und Arbeitsweise von Pinnacle Studio HD kennenlernen. Es ist dann auch weniger schlimm, wenn Sie mal aus Versehen etwas löschen oder nicht mehr finden. Wenn Sie Anregungen zum Buch haben, erreichen Sie mich unter der E-Mail-Adresse
[email protected]. Bitte geben Sie auch den Titel des Buches und die ISBN-Nummer an. Weitere Informationen über den Autor finden Sie unter www.godiz.ch. Regelmäßig schreibe ich ein Blog mit Tipps & Tricks zu Pinnacle Studio HD. Dort beschreibe ich zusätzliche Funktionen, die immer mit kleinen Videoanleitungen ergänzt sind. Schauen Sie doch einfach einmal rein unter http://blog.godiz.ch. Nun wünsche ich Ihnen viel Spaß beim Lesen und vor allem viel Freude am Filmen und Bearbeiten Ihrer Videos! Simon Gabathuler
18
1 Einleitung
Die verschiedenen Programmversionen In diesem Abschnitt werden die Varianten von Pinnacle Studio HD Version 15 mit ihren Unterschieden und Möglichkeiten vorgestellt. Grundsätzlich existieren zwei verschiedene Softwareversionen: Studio HD Version 15 und Studio HD Ultimate Version 15. Darüber hinaus liegt noch eine dritte Version vor, die Ultimate Collection Version, bei der es sich um Studio HD Ultimate Version 15 und einen erweiterten Funktionsumfang mit Effekten von Drittherstellern handelt.
Abbildung 1.1: Pinnacle Studio HD Version 15
19
Kapitel 1 – Einleitung
Abbildung 1.2: Pinnacle Studio HD Ultimate Version 15
Abbildung 1.3: Pinnacle Studio HD Ultimate Collection Version 15
Pinnacle Studio HD Version 15 richtet sich an die Anwender, die ihre Videos schnell und ohne weitere Effekte zusammenschneiden und auf DVD oder Videodatei ausgeben möchten. Pinnacle Studio HD Ultimate Version 15 enthält zusätzliche Funktionen, um ein Video interessanter zu gestalten, zu restaurieren usw. Pinnacle Studio HD Ultimate Collection Version 15 wendet sich an Anwender, die noch mehr aus ihren Filmen machen möchten, und beinhaltet sehr interessante Plug-ins von Drittherstellern, auf die in Anhang A, „Pinnacle Studio HD Ultimate- und Ultimate Collection-Plug-ins“ näher eingegangen wird.
20
Die verschiedenen Programmversionen Folgende Tabelle zeigt die Unterschiede in den drei Produkten auf. Funktion
Studio Studio HD HD Ultimate
Studio HD Ultimate Collection
Skalierbare Bedieneroberfläche
Ja
Ja
Ja
Windows 7-kompatibel Läuft unter Vista und XP
Ja
Ja
Ja
Importieren von Video- und Fotodateien von nahezu beliebigen dateibasierten Video- und Digitalkameras, Datenträgern* oder Handys
Ja
Ja
Ja
Natives Einspielen und Bearbeiten von HDV & AVCHD
Ja
Ja
Ja
SmartMovie für einfachste Filmerstellung
Ja
Ja
Ja
Hinzufügen von Markierungen in die Timeline
Ja
Ja
Ja
Drehen von Videos/Fotos
Ja
Ja
Ja
Vorlagenbasiertes Compositing auf mehreren Spuren (Montage)
Ja
Ja
Ja
Timeline-Lautstärkeüberwachung und Master-Lautstärkekontrolle
Ja
Ja
Ja
Werkzeuge zum Verbessern von Videound Audiomaterial
Ja
Ja
Ja
Pan und Zoom zur Animation von Standbildern
Ja
Ja
Ja
Echtzeiteffekte mit Vorschau
Ja
Ja
Ja
Hi-Fi-Musikgenerator
Ja
Ja
Ja
Integriertes DVD-Authoring und Brennen
Ja
Ja
Ja
Direktes Hochladen auf Yahoo! Video und YouTube
Ja
Ja
Ja
Flash-Export
Ja
Ja
Ja
Erstellen von MP3-Dateien
Ja
Ja
Ja
Exportieren als Videodatei, auf Band oder Brennen von DVDs mit Menü
Ja
Ja
Ja
Brennen von AVCHD auf Standard-DVD
Ja
Ja
Ja
Bild-in-Bild- und Chroma-Key-Effekte
Ja
Ja
Ja
Projekte archivieren und wiederherstellen
Ja
Ja
Ja
Blu-ray-Authoring mit Motion-Menüs
Nein
Ja
Ja
Keyframe-Effekte
Nein
Ja
Ja
Dolby-5.1-Encoding
Nein*
Ja**
Ja**
Motion-Titel-Erstellung
Nein
Ja
Ja
Tabelle 1.1: Funktionsvergleich der drei Varianten von Pinnacle Studio Version 15
21
Kapitel 1 – Einleitung Funktion
Studio Studio HD HD Ultimate
Studio HD Ultimate Collection
Zusätzliche Effekte von Hollywood FX 1, 2 und 3
Ja
Ja
Ja
Pinnacle Premium Pack Vol. 2 mit Titel- und Disc-Menü-Vorlagen sowie Soundeffekte
Nein
Ja
Ja
Creative Pack Vol. 1 mit Titel-, Disc-Menüund Montagethemen-Vorlagen
Nein
Nein
Ja
Enthält 2 Plug-ins von Red Giant: ToonIt und Knoll Light Factory
Nein
Ja
Ja
Enthält 4 Plug-ins von Red Giant: Shine, Magic Bullet Looks, 3D Stroke und Particular
Nein
Nein
Ja
Grünes Hintergrundtuch
Nein
Nein
Ja
Tabelle 1.1: Funktionsvergleich der drei Varianten von Pinnacle Studio Version 15 (Forts.)
* Kostenpflichtige Produktaktivierung über das Internet erforderlich ** Kostenlose Produktaktivierung über das Internet erforderlich In diesem Buch werden Pinnacle Studio HD, Pinnacle Studio HD Ultimate und Pinnacle Studio HD Ultimate Collection in der Version 15 beschrieben. Wenn eine Funktion auftaucht, die nur in Pinnacle Studio HD Ultimate und Pinnacle Studio HD Ultimate Collection enthalten ist, erscheint folgender Hinweis: Hinweis
Ultimate & Ultimate Collection Diese Funktion ist nur in Pinnacle Studio HD Ultimate und Pinnacle Studio HD Ultimate Collection Version 15 verfügbar. Wenn eine Funktion auftaucht, die nur in Pinnacle Studio HD Ultimate Collection enthalten ist, erscheint folgender Hinweis:
Hinweis
Ultimate Collection Diese Funktion ist nur in Pinnacle Studio HD Ultimate Collection Version 15 verfügbar.
Digital-Analog-Digital-Konverter Für die Digitalisierung von einer analogen VHS- oder Super-VHS-Quelle bietet Pinnacle zwei unterschiedliche externe Konverter an, die über USB an den PC angeschlossen werden können.
22
Hardware und Optimierung
Abbildung 1.4: Studio Moviebox USB
Die Box wird über USB an den PC angeschlossen und verfügt über analoge Eingänge für VHS, Super-VHS und Stereo-Audio. Zudem enthält sie zusätzlich einen FireWireAnschluss für das Überspielen von einem MiniDV-Camcorder.
Abbildung 1.5: Studio Moviebox Plus USB
Die Box wird über USB 2.0 an den PC angeschlossen und verfügt über Ein- und Ausgänge für VHS, Super-VHS und Audio. Zusätzlich befindet sich an der Box ein FireWireAnschluss.
Hardware und Optimierung Um mit Pinnacle Studio HD gut arbeiten zu können, sollte Ihr PC optimal konfiguriert sein. In diesem Kapitel erfahren Sie, welche Hardwarevoraussetzungen die Arbeit mit Pinnacle Studio HD stellt und wie die Software konfiguriert werden kann. Ein Videoschnittprogramm verlangt von einem PC weitaus mehr Leistung als z.B. Word oder Excel. Darum kann es bei Systemen, deren Leistungsstärke gerade die Mindestvoraussetzungen erfüllt, zu Problemen kommen. Allerdings taugt auch ein leistungsstarkes System nicht unbedingt etwas, wenn es falsch konfiguriert oder eingesetzt wird. Die nächsten Abschnitte geben Ihnen Hilfestellung bei solchen Fragen, damit Sie Ihren PC an die Erfordernisse von Pinnacle Studio HD anpassen können. Generell sollten Sie regelmäßig auf der Internetseite von Pinnacle Systems (www.pinnaclesys.de) nach neuen Versionen von Pinnacle Studio HD Ausschau halten und die neuesten Windows-Updates installieren.
23
Kapitel 1 – Einleitung Wenn Pinnacle Studio HD das erste Mal gestartet wird und eine Verbindung zum Internet besteht, kann das Programm auf der Website von Pinnacle Systems prüfen, ob bereits ein Update verfügbar ist. Weiteres dazu erfahren Sie im Verlauf dieses Kapitels.
PC-Grundvoraussetzungen Um mit Pinnacle Studio HD Version 15 arbeiten zu können, muss die PC-Hardware die technischen Voraussetzungen erfüllen und schnell genug sein. Nachfolgende Liste zeigt Ihnen, welche Hardware mindestens notwendig ist. Grundsätzlich gilt: Eine höhere PC-Leistung bietet größeren Komfort bei der Videobearbeitung. Sind die minimalen Hardwarevoraussetzungen gegeben, heißt dies nicht, dass Pinnacle Studio HD auch optimal, sondern lediglich, dass die Software grundsätzlich ausgeführt werden kann. Die Systemvoraussetzungen unterscheiden sich bei einem Windows XP-, Vista- und Windows 7-PC. Pinnacle Studio HD läuft ausschließlich unter diesen drei Betriebssystemen, alle anderen werden nicht unterstützt. 쐽 Windows® 7, Windows Vista® (SP2), Windows XP (SP3), lauffähig auf 32-und 64-Bit-Architektur 쐽 Intel Core 2 Duo 2,4 GHz erforderlich für AVCHD (oder entsprechendes AMD-System), Intel Core 2 Quad 2,66 GHz oder Intel Core i7 erforderlich für AVCHD 1920 (oder entsprechendes AMD-System) 쐽 1 GByte RAM empfohlen, 2 GByte erforderlich für AVCHD 쐽 DirectX® 9- oder DirectX® 10-kompatible Grafikkarte mit 64 MByte (128 MByte oder höher empfohlen), 256 MByte für HD- und AVCHD-Bearbeitung erforderlich 쐽 Soundkarte – DirectX® 9-kompatibel oder höher 쐽 5 bis 6 GByte freier Festplattenspeicher zur Installation der Software 쐽 DVD-ROM-Laufwerk zur Installation der Software 쐽 Optional: CD-Brenner zum Erstellen von Video-CDs oder Super-Video-CDs (S-VCDs) 쐽 Optional: DVD-Brenner für die Erstellung von DVD, HD-DVD und AVCHD-Discs auf Standard-DVD-Medien 쐽 Optional: Blu-ray-Brenner für die Erstellung von Blu-ray Discs (kostenlose Produktaktivierung über das Internet erforderlich) 쐽 Optional: Soundkarte mit Surround-Sound-Ausgabe erforderlich für Vorschau von Surround-Sound-Mischung (kostenpflichtige Produktaktivierung über das Internet erforderlich) Grafikkarte Die Grafikkarte ist bei Studio von großer Bedeutung. Bei der Echtzeitvorschau, beim Rendern und der Wiedergabe von Video spielen der Prozessor der Grafikkarte, die GPU, und die Softwaretreiberversion eine entscheidende Rolle. Beim ersten Start von Studio werden die installierte Grafikkarte und Treiberversion getestet. Es erscheint allenfalls eine Meldung, falls beides nicht ausreicht. Folgende Arbeitsspeicher werden von der Grafikkarte für ein problemloses Arbeiten benötigt: Windows XP 쐽 64 MByte für Standard Definition – nur Video 쐽 128 MByte für High Definition bis zu 720 p 쐽 256 MByte für High Definition bis zu 1080 i/p und AVCHD
24
Hardware und Optimierung Windows 7 und Vista 쐽 128 MByte für Standard Definition – nur Video 쐽 256 MByte für High Definition bis zu 1080 i/p und AVCHD Durch Einsatz einer Grafikkarte mit mehr Speicherkapazität als oben angegeben kann die Leistung in Kombination mit HD erhöht werden. Für beste Ergebnisse bei HD und bei Verwendung mehrerer Plug-ins empfiehlt sich der Einsatz einer Grafikkarte mit 512 oder 1024 MByte RAM. Da einige Grafikkarten 16 MByte der Speicherkapazität für den internen Gebrauch reservieren, können Videos unter Umständen nicht mit der erwarteten Auflösung bearbeitet werden. So kann beispielsweise die Grafikkarte NVIDIA Quadro mit 128 MByte nur SD-Bearbeitung unterstützen oder eine Quadro mit 256 MByte nur HD bis zu 720 p bearbeiten. Shared-Memory-Grafikkarten, die über keinen eigenen Speicher verfügen und stattdessen auf den Systemhauptspeicher zurückgreifen müssen, können HD nicht bearbeiten. Zu diesen Grafikkarten gehören die Intel Onboard-Grafikkarten i845, i860, i915, i940 und nVidia TurboCache-Grafikkarten.
Bearbeiten von High Definition Video – AVCHD Bei AVCHD (Advanced Video Codec High Definition) handelt es sich um das neueste High-Definition-Format für Consumer- und Semiprofi-Camcorder. Dieses Format basiert auf dem H.264-Codec und bietet neben einer hohen Kompressionsrate den Vorteil von nur minimalen Qualitätseinbußen. Das Ergebnis sind kleinvolumige, großartige HD-Videodateien, die allerdings für die Wiedergabe und Bearbeitung ein komplexeres Kompressionsschema aufweisen – aus diesem Grund wird für die Bearbeitung dieser Dateien ein entsprechend leistungsfähiger Computer benötigt. Bitte beachten Sie bei der Bearbeitung von AVCHD-Dateien die folgenden Punkte: Mindestsystemvoraussetzungen 쐽 Intel® CoreTM2 Duo bzw. i7, 2,4 GHz oder höher für 1440 x 1080 AVHCD-Bearbeitung und Intel® CoreTM2 Quad bzw. i7, 2,66 GHz oder höher für das Format AVCHD 1920 x 1080 empfohlen (oder entsprechendes AMD-System) 쐽 2 GByte Systemspeicher (RAM) 쐽 DirectX® 9- oder DirectX® 10-kompatible Grafikkarte mit mindestens 256 MByte oder höher, 512 MByte bzw. 1024 MByte empfohlen 쐽 UDF-2.5-Treiber unter Windows XP zur Erkennung von AVCHD-DVDs (oder Bluray Discs) 쐽 64 Bit für Windows Vista bzw. Windows 7 werden empfohlen. Bei AVCHD-Produktionen beeinflusst die Komplexität des Projekts direkt die Systemperformance, wobei unter Umständen folgende Situationen auftreten können: 쐽 Wenn AVCHD-Clips in das Album importiert werden, kann es länger als bei SD-Material oder anderen HD-Codecs dauern, bis die Szenenbilder (Thumbnails) dargestellt werden. 쐽 Bei der Integration von Überblendeffekten zwischen AVCHD-Videoclips kann möglicherweise erst nach dem vollständigen Hintergrund-Rendern eine Vorschau angezeigt werden.
25
Hinweis
Kapitel 1 – Einleitung 쐽 Bei Verwendung von Montagethemen oder beim Hinzufügen eines Bild-in-BildEffekts (auf der Overlayspur) kann unter Umständen erst nach dem vollständigen Rendern eine Vorschau angezeigt werden. Im Vorschaufenster wird in diesen Fällen möglicherweise ein Ausrufezeichen angezeigt, das darauf hinweist, dass das Hintergrund-Rendern noch nicht abgeschlossen ist. 쐽 Bei der Disc-Menü-Erstellung empfehle ich Ihnen die Verwendung von Disc-Menüs OHNE bewegte Hintergründe (Motion Backgrounds) oder Kapitelminiaturen. 쐽 Höhere Leistung bei Vorschau mit niedriger Auflösung und MPEG-2-Vorschau-Rendering. Um diese Einstellung zu ändern, wählen Sie im Menü Setup, dann Video- und Audio-Voreinstellungen und entfernen unter Vorschau mit voller Auflösung das Häkchen. Die Option Hintergrund-Rendern auf MPEG2-Vorschau einstellen. 쐽 Höhere Leistung bei deaktiviertem Hintergrund-Rendern: Möglicherweise aktivieren Sie diese Option nur dann, wenn Sie ein Projekt abschließen wollen. Wählen Sie Setup, dann Video- und Audio-Voreinstellungen und deaktivieren Sie die Option Hintergrund-Rendern aktivieren. Achtung
Wichtiger Hinweis für die Wiedergabe von AVCHD-Discs: Bitte verwenden Sie niemals AVCHD-Discs in Geräten, die nicht den AVCHD-Standard unterstützen. Das Gerät wirft unter Umständen die Disc nicht mehr aus oder löscht nach Anzeige einer Nachricht, die zur Neuformatierung der Disc auffordert, auf der Disc vorhandene Daten.
Optimierung Zusätzlich zur richtigen Hardware ist es wichtig, dass die Software optimal konfiguriert wird. Je weniger Software auf einem PC installiert ist und gleichzeitig läuft, desto schneller ist ein PC, und je schneller die Hardware, desto schneller rechnet das System. Die Videobearbeitung erfordert viel mehr Ressourcen als andere Software. Wie Sie im vorherigen Abschnitt gesehen haben, sind die Hardwareanforderungen zum Teil recht hoch, vor allem für das Bearbeiten von High Definition und AVCHD. Wenn Sie regelmäßig Videos auf dem PC bearbeiten, ist es unter Umständen empfehlenswert, für die Videobearbeitung einen separaten PC zu verwenden, damit die volle Leistung ausgenutzt werden kann. Die folgende Liste zeigt, welche Software und Treiber für ein optimales Arbeiten notwendig sind: 쐽 Windows 7, Vista oder Windows XP als Betriebssystem 쐽 die neuesten Originaltreiber für die installierte Hardware 쐽 Pinnacle Studio HD mit den neuesten Updates, Patches und Fixes 쐽 evtl. ein Grafikbearbeitungsprogramm 쐽 evtl. ein Audiobearbeitungsprogramm 쐽 evtl. DVD- und Blu-ray-Abspielsoftware Weitere Software wird für die Videobearbeitung eigentlich nicht benötigt. Im Gegenteil: Sie sollten so weit wie möglich auf zusätzliche Software verzichten. Folgende Programme verlangsamen das Arbeiten mit Pinnacle Studio HD Version 15: 쐽 Antivirensoftware 쐽 Software-Firewalls
26
Hardware und Optimierung 쐽 Internetzugang 쐽 alle zusätzlich im Hintergrund laufenden Programme, die nicht dringend benötigt werden, z.B. Bildschirmschoner Wenn Sie tatsächlich keine Antivirensoftware auf dem Videoschnitt-PC installiert haben, sollten Sie ihn auf keinen Fall mit dem Internet verbinden und alle Daten von Datenträgern wie CDs, DVDs, Memory Sticks und externen Laufwerken vor dem Kopieren mit einem anderen PC auf Viren und Würmer überprüfen.
Achtung
Es ist sehr sinnvoll, die Videos auf einem „reinen“ Videoschnitt-PC zu bearbeiten, der nicht ans Internet angeschlossen ist. Wenn Sie auf die oben erwähnten Programme nicht verzichten möchten oder können, rate ich Ihnen, ein Festplatten-WechselrahmenSystem einbauen zu lassen.
Tipp
Pinnacle Studio HD benötigt im Prinzip keine Verbindung zum Internet. Für die Registrierung der Software und für Updates ist eine Internetverbindung notwendig, die Daten können aber auch über einen anderen PC eingegeben oder heruntergeladen werden.
Hinweis
Dies gibt Ihnen die Möglichkeit, verschiedene Grundinstallationen physikalisch voneinander zu trennen. Die System-Festplatte C: mit der Videoinstallation wird in eine Schublade eingebaut, die in das PC-System eingeschoben werden kann. In einer anderen Schublade mit einer zweiten Festplatte für Office-Anwendungen sind noch einmal das Betriebssystem und alle anderen Programme installiert. Vor dem Einschalten des PCs legen Sie jeweils die benötigte Festplatte ein und können so, befreit von allen nicht gebrauchten Programmen, arbeiten. Ziehen Sie, falls Sie eine solche Installation erwägen, am besten einen Experten zurate. Das Betriebssystem und alle anderen Programme werden auf die Festplatte C: installiert. Das ist eine Konvention in der Informatik. Man kann Programme zwar auch auf einer anderen Festplatte installieren, davon rate ich Ihnen jedoch dringend ab. Bei einem neuen PC empfiehlt es sich, das System mittels einer Sicherungssoftware komplett zu sichern. Wenn eine Software Probleme beim Arbeiten bereitet, kann innerhalb kurzer Zeit auf eine funktionsfähige Sicherung zurückgegriffen werden. Dabei ist darauf zu achten, dass keine Daten auf Laufwerk C: gespeichert werden. Das ist wichtig, denn wenn eine Sicherung zurückgespielt werden muss, würden alle Daten, die auf dem Laufwerk C: liegen, gelöscht. Unter „Daten“ verstehe ich in diesem Fall alles, was auf Ihrem PC neu hinzugekommen ist: Fotos, Texte, Videos, Projekte usw. Geeignete Programme für ein solches Backup wären Acronis TrueImage oder Norton Ghost.
Eigene Dateien Der Inhalt des Ordners Eigene Dateien befindet sich standardmäßig immer auf der Festplatte C:. Wenn Sie den PC mit einem Sicherungsprogramm komplett sichern, sollten Sie das bei Daten und Betriebssystem getrennt voneinander tun. Beim Wiederherstellen des Betriebssystems würden sämtliche Daten auf dem Laufwerk C: gelöscht werden. Sie können den Speicherort von Eigene Dateien wie folgt manuell ändern (allerdings empfehle ich Ihnen, die Projekte so anzulegen, wie es im Abschnitt „Das erste Projekt“ beschrieben wird):
27
Kapitel 1 – Einleitung Beschreibung für Windows XP 1. Klicken Sie mit der rechten Maustaste auf Eigene Dateien auf dem Windows-Desktop und wählen Sie Eigenschaften.
Abbildung 1.6: Der Desktopordner Eigene Dateien
2. Geben Sie unter Ziel einen Speicherort für die Daten auf einem anderen Laufwerk als C: an.
Beschreibung für Windows 7 und Vista Bei Windows Vista gibt es leider den Ordner Eigene Dateien nicht mehr. Damit alle Daten auf einem anderen Laufwerk gespeichert werden können, müssen Sie den sogenannten Dokumente-Ordner verschieben, in dem gemeinsam genutzte Daten gespeichert werden. Hinweis
Eine Verschiebung der Ordner ist nicht unbedingt notwendig. Sie können Ihre Daten einfach immer auf eine andere Festplatte speichern als in die Standardordner von Windows Vista und Windows 7. Falls Sie die Standardordner für Bilder, Musik, Videos usw. verschieben möchten, dann müssen Sie die Änderung für jeden Ordner vornehmen. Gehen Sie wie folgt vor, wenn Sie den Speicherort verändern möchten. 1. Wählen Sie Start und dann Computer, um den Arbeitsplatz anzeigen zu lassen.
Abbildung 1.7: Arbeitsplatz in Windows 7 und Vista
28
Hardware und Optimierung 2. Klicken Sie mit der rechten Maustaste auf den Ordner, dessen Speicherort Sie verändern möchten, und klicken Sie dann auf Eigenschaften. 3. Öffnen Sie das Register Pfad. 4. Wählen Sie Ziel suchen ... und geben Sie einen anderen Speicherort für die Daten an.
Abbildung 1.8: Ändern Sie den Speicherpfad des Ordners durch Verändern des Zielspeicherorts
Die Daten werden auf das Ziellaufwerk bzw. in den Zielordner verschoben.
Bildschirmschoner ausschalten Sie sollten den Bildschirmschoner auf Ihrem PC ausschalten, da dies zu Störungen während des Digitalisierens oder Exportierens von Filmen führen kann. Zusätzlich können Sie Strom sparen, wenn Sie während des Renderns langer Videos den Monitor einfach abschalten, womit Sie auch ein Einbrennen des Monitors verhindern.
Festplattenkonfiguration Die folgenden Erklärungen richten sich eher an fortgeschrittene Anwender. Es ist nicht unbedingt notwendig, dass Sie die Festplatten in Ihrem PC anpassen. Falls Sie allerdings oft und viel mit Video arbeiten, kann es sehr hilfreich sein, die Festplatten anzupassen und zu optimieren. Sicher ist Ihr PC-Fachhändler bereit, Ihnen Unterstützung zu geben, falls Sie das nicht selbst ausführen können.
29
Kapitel 1 – Einleitung Standardmäßig sollte Pinnacle Studio HD auf der Festplatte C: installiert sein. Die Projektdateien können auf eine Partition der ersten Festplatte oder auf eine eigene Festplatte gespeichert werden. Hierfür reicht eine „kleine“ Festplatte mit 120 bis 320 GByte. Als Video-Festplatte wird eine größere Festplatte empfohlen. Je mehr Videos im PC gespeichert werden sollen, desto größer muss die Festplatte sein. Eine Stunde digitales Videomaterial von einer MiniDV-Kassette benötigt ca. 13 GByte Speicherplatz. Achten Sie darauf, dass alle Festplatten im NTFS-Dateiformat formatiert sind und eine Geschwindigkeit von mindestens 7200 rpm, Drehungen pro Minute, aufweisen. NTFS bedeutet New Technology File System und wird unter Windows 7, Vista und Windows XP eingesetzt. NTFS kann im Gegensatz zum FAT32-Dateisystem Daten verwalten, die größer sind als 4 GByte. Sonst könnte man keine längeren Filme oder größeren Dateien als einzelne Datei auf einer Festplatte speichern. Ebenso ist es wichtig, dass die Festplatten genügend Daten pro Sekunde transferieren können. Die meisten Festplatten können die benötigten 4 MByte/Sek. verarbeiten. DVVideomaterial benötigt beim Einspielen auf die Festplatte mindestens 3,6 MByte/Sek., das ergibt für viereinhalb Minuten etwa 1 GByte Speicherplatz.
Festplatten defragmentieren Wenn Sie Daten auf einer Festplatte löschen, entstehen Lücken zwischen noch vorhandenen Daten. Wenn Ihr PC neue Daten (z.B. Render- oder Videodateien) speichert, werden solche Zwischenräume mit sogenannten Fragmenten von Daten gefüllt. Dies führt dazu, dass eine große Datei auf verschiedene solcher Lücken aufgeteilt wird. Sie haben auf das Speichern solcher Fragmente keinen Einfluss. Wenn eine Videodatei am PC abgespielt wird, müssen Windows und Pinnacle Studio HD die Datenfragmente zusammenfügen, was zu Leistungseinbußen führt. In Windows gibt es eine Funktion namens Defragmentieren, welche die Festplatte aufräumt und die Daten einer Datei wieder zusammenhängend neu speichert. Es empfiehlt sich, die Festplatten von Zeit zu Zeit zu defragmentieren, um die Leistung des Systems zu erhöhen. Sie sollten das Laufwerk C: und auch die Video- und Render-Festplatten defragmentieren. Achtung
Beim Defragmentieren werden Ihre Daten auf der Festplatte verschoben. Das Defragmentieren kann bei größeren Festplatten recht lange dauern. Um eine Festplatte zu defragmentieren, gehen Sie wie folgt vor: Beschreibung für Windows XP 1. Öffnen Sie mit einem Doppelklick den Arbeitsplatz auf dem Desktop. 2. Klicken Sie mit der rechten Maustaste auf das Laufwerk, das Sie defragmentieren wollen, und wählen Sie den Eintrag Eigenschaften. 3. Wechseln Sie in das Register Extras und klicken Sie auf Jetzt defragmentieren.
30
Hardware und Optimierung
Abbildung 1.9: Starten der Defragmentieren-Funktion unter Windows XP
Beschreibung für Windows 7 und Vista 4. Klicken Sie auf Start und dann auf Computer. 5. Klicken Sie mit der rechten Maustaste auf das Laufwerk, das Sie defragmentieren wollen, und wählen Sie dann den Eintrag Eigenschaften. 6. Wechseln Sie in das Register Tools und klicken Sie auf Jetzt defragmentieren. 7. Klicken Sie evtl. auf Fortsetzen, wenn eine Bestätigung verlangt wird.
Abbildung 1.10: Defragmentierung unter Windows Vista starten
8. Klicken Sie auf Jetzt defragmentieren, um den Vorgang zu starten.
31
Kapitel 1 – Einleitung Zuerst wird das Laufwerk überprüft und danach beginnt der eigentliche Vorgang. Dies kann, je nachdem, wie groß ein Laufwerk ist und wie viel zu defragmentieren ist, ziemlich lange dauern. Warten Sie, bis der Vorgang beendet ist. Sie können ihn allerdings auch mit Unterbrechen oder Anhalten stoppen.
Die Installation Pinnacle Studio HD wird mit einem Datenträger ausgeliefert. So führen Sie die Installation durch: 1. Legen Sie die Install-DVD in ein DVD-Laufwerk ein. Nach dem Einlegen sollte die Installation automatisch starten, und es erscheint das erste Dialogfenster. Sollte der Installationsvorgang bei Ihnen nicht von selbst starten, wechseln Sie in den Arbeitsplatz, öffnen mit einem Doppelklick das DVD-Laufwerk und führen einen Doppelklick auf die Datei Welcome.exe aus. Danach startet die Installation in jedem Fall.
Abbildung 1.11: Installationsprogramm von Studio 15
2. Starten Sie die Installation von Studio 15, indem Sie mit der linken Maustaste auf Studio 15 klicken.
32
Die Installation
Abbildung 1.12: Nach dem Starten des Installationsvorgangs können Sie eine Sprache wählen
3. Wählen Sie eine Sprache aus der Liste aus und klicken Sie auf OK.
Abbildung 1.13: Geben Sie hier die erforderlichen Daten ein
4. Tragen Sie im nächsten Fenster die erforderlichen Daten ein. Wichtig ist die Seriennummer, die Sie mit dem Programm erhalten haben. Zusätzlich sollten Sie die Option Ich möchte per E-Mail über Neuigkeiten und Angebote von Pinnacle Systems informiert werden per Klick aktivieren, denn nur so gehören Sie zu dem ausgewählten Kreis, der aktuelle Informationen über Neuerungen von Pinnacle Studio HD ohne Umwege erhält. 5. Klicken Sie auf Jetzt registrieren, wenn Sie sich gleich bei Pinnacle registrieren möchten, oder auf Bitte später erinnern, wenn Sie dies später erledigen wollen. Für die Registrierung ist eine Internetverbindung notwendig.
33
Kapitel 1 – Einleitung
Abbildung 1.14: Starten Sie die Installation durch einen Klick auf Weiter
6. Klicken Sie mit der linken Maustaste auf Weiter, um die Installation zu starten.
Abbildung 1.15: Nach Bestätigung der Lizenzvereinbarung kann die Installation fortgesetzt werden
7. Sie müssen der Lizenzvereinbarung zustimmen, damit die Installation fortgesetzt werden kann. Wählen Sie also Ich akzeptiere die Bedingungen der Lizenzvereinbarung und klicken Sie dann auf Weiter.
34
Die Installation
Abbildung 1.16: Wählen Sie die Zielverzeichnisse für die Installation
8. Belassen Sie die Installationspfade. Es ist am sinnvollsten, das Programm auf C:\ und in die vorgeschlagenen Ordner zu installieren. Klicken Sie auf Weiter.
Abbildung 1.17: Wählen Sie, für welche PC-Benutzer die Software installiert werden soll
35
Kapitel 1 – Einleitung 9. Wählen Sie, für wen Studio auf Ihrem PC installiert werden soll. In der Regel können Sie die Option Jeden, der diesen Computer verwendet (alle Benutzer) wählen. Klicken Sie auf Weiter.
Abbildung 1.18: Erstellen von Verknüpfungen
10. Hier wird gefragt, wo Studio Verknüpfungen zum Starten der Software erstellen soll. In der Regel können Sie beide Optionen auswählen. Klicken Sie auf Weiter.
Abbildung 1.19: Starten Sie die Installation durch einen Klick auf Installieren
36
Die Installation 11. Sie können nun den Kopiervorgang der Dateien auf die Festplatte starten, indem Sie auf Installieren klicken. Warten Sie, bis die Installation beendet ist.
Abbildung 1.20: Wenn Sie weitere Hilfe benötigen, setzen Sie ein Häkchen, um die Internetseite von Avid für weitere Informationen zu öffnen
12. Klicken Sie auf Fertigstellen um fortzufahren.
Abbildung 1.21: Wenn Sie über Pinnacle Studio Ultimate oder Ultimate Collection verfügen, werden die zusätzlichen Plug-ins installiert
13. Klicken Sie auf OK, um die Ultimate bzw. Ultimate Plug-ins zu installieren. Folgen Sie dann einfach den weiteren Bildschirmanweisungen.
37
Kapitel 1 – Einleitung
Abbildung 1.22: Nach erfolgreicher Installation erhalten Sie eine Meldung
14. Klicken Sie auf Fertigstellen, um die Installation der Plug-ins abzuschließen. Im nächsten Schritt werden die zusätzlichen Übergangseffekte und Vorlagen installiert. Je nachdem, welche Pinnacle Studio HD-Version Sie besitzen, werden die Zusatzpakete unterschiedlich aufgelistet.
Abbildung 1.23: In diesem Schritt haben Sie die Möglichkeit, Übergangseffekte und Vorlagen von Pinnacle Studio HD zu installieren
15. Klicken Sie auf OK und folgen Sie dann den Bildschirmanweisungen, um die Zusatzpakete zu installieren.
38
Die Installation
Abbildung 1.24: Nach erfolgreicher Installation des Bonus-Inhalts klicken Sie auf Fertig stellen
16. Klicken Sie auf Fertig stellen, um die Installation der Bonus-Inhalts abzuschließen.
Abbildung 1.25: Die installierten Komponenten werden mit einem Häkchen markiert
17. Klicken Sie auf Installationsprogramm beenden.
39
Kapitel 1 – Einleitung
Pinnacle Studio HD starten Nach der Installation befindet sich ein Icon auf Ihrem Desktop, mit dem Sie Pinnacle Studio HD starten können.
Abbildung 1.26: Klicken Sie mit der Maus doppelt auf das Symbol, um Studio zu starten
Sie können Studio auch über das Startmenü von Windows aufrufen, klicken Sie dazu auf Start/Programme/Pinnacle Studio 15/Pinnacle Studio 15.
Grundsätzliches für die Arbeit mit Pinnacle Studio HD Für die Arbeit mit Pinnacle Studio HD sind einige Grundsätze nennenswert, die Ihnen die Philosophie und Möglichkeiten des Programms näherbringen. Pinnacle Studio HD Version 15 hat gegenüber den Vorgängerversionen einige Veränderungen und Neuerungen erfahren, auf die im Folgenden kurz eingegangen wird. Seit der Version 10 von Studio wurde die Codebasis komplett erneuert, die auf das professionelle Videoschnittprogramm Liquid Edition von Avid gründet. Sie bringt eine Reihe von Veränderungen im Gegensatz zur Version 9 mit sich, die aber im Programm nicht sofort ersichtlich sind, da das Aussehen der Programmoberfläche nur wenig geändert wurde. Sie müssen sich nicht weiter darum kümmern, dass die Basis auf Avid Liquid aufgesetzt wurde, aber es interessiert Sie vielleicht, dass nun alle Funktionen, Effekte und Filter auf einer professionellen Videoschnittlösung beruhen, die auch in TV-Studios und Produktionsfirmen eingesetzt wird. Die neuen Funktionen werden im Laufe dieses Kapitels beschrieben.
Pinnacle Studio HD 15 updaten Allen, die Pinnacle Studio 15 HD erworben haben, bietet Pinnacle neue kostenlose Updates an, damit das Programm immer den aktuellsten Hardwareanforderungen entspricht. Schließlich kommt ständig neue Hardware auf den Markt, die unter Umständen mit Pinnacle Studio HD nicht kompatibel ist. Über die Website http:// www.pinnaclesys.de stellt Pinnacle Updates zur Verfügung. Ebenso können Anpassungen in der Software nachgeliefert werden. Sie sollten also regelmäßig nach neuen Updates Ausschau halten. Pinnacle Studio HD 15 enthält eine Funktion, die selbst nach Updates suchen kann, dafür ist allerdings eine Internetverbindung notwendig. Gehen Sie wie folgt vor:
40
Neue Funktionen 1. Wählen Sie im Menü von Pinnacle Studio Hilfe und danach Software-Updates aus der Liste aus.
Abbildung 1.27: Einstellung für die Software-Updates
2. Klicken Sie auf OK, um automatisch nach Updates suchen zu lassen. 3. Falls ein Update zur Verfügung steht, wird die Internetseite geöffnet. Laden Sie das Update auf Ihre Festplatte. 4. Doppelklicken Sie auf die neu heruntergeladene Datei, um das Update zu installieren.
Neue Funktionen Im Folgenden finden Sie eine Übersicht über die neuen Funktionen in Pinnacle Studio HD 15, Pinnacle Studio HD Ultimate 15 und Pinnacle Studio HD Ultimate Collection 15 gegenüber der Vorgängerversion Pinnacle Studio 14. Eine Auflistung der neuen Funktionen von Pinnacle Studio HD Version 14 gegenüber den älteren Versionen finden Sie im nächsten Abschnitt. Neben den im Folgenden vorgestellten neuen Funktionen in Studio Version 15 wurde auch viel Wert auf die Leistung der Software gelegt. Diese läuft stabiler und benötigt im Allgemeinen etwas weniger PC-Ressourcen. Ebenfalls wurde die Bearbeitung von AVCHD verbessert.
Neue Funktionen in der Version 15 Projekte sichern und wiederherstellen Neben kleineren Verbesserungen und neuen unterstützten Videoformaten für Import und Export gibt es eine Funktion, um Projekte zu sichern und wiederherzustellen. Mit dieser Funktion ist es zum Beispiel möglich, ein Projekt komplett auf eine externe Festplatte zu sichern oder auszulagern, um später wieder daran zu arbeiten oder um bei PC-Problemen komplette Projekte wiederherzustellen. Mit der Archivieren-Funktion werden nicht nur die Projektdaten, sondern auch alle Videos, Fotos und Musikdateien archiviert.
Neue Videoformate In der Version 15 können neue Videoformate eingelesen und wieder ausgegeben werden. Neue Formate sind unter anderen MKV, Divx-HD, QuickTime HD, AVCHD Lite und YouTube-HD. Für gewisse Formate ist eine kostenlose Aktivierung über das Internet notwendig.
41
Kapitel 1 – Einleitung
Effekte-Bibliotheken Die einzelnen Effekte-Pakete sind zwar nicht neu, sind aber neu bereits im Umfang von Pinnacle Studio 15. Das hat den Vorteil, dass bereits gekaufte Effekte nicht von einer älteren Version übernommen werden müssen, oder beim Installieren auf einem neuen PC bereits mitgeliefert werden. Bei allen drei Versionen sind die Hollywood FX-Bibliotheken 1 bis 3 mit bis zu je 400 Übergangseffekten enthalten. In der Studio HD Ultimate und Ultimate Collection sind das Premium Pack Vol. 2 mit Titel- und Disc-Menü-Vorlagen sowie Soundvorlagen enthalten. In der Studio HD Ultimate Collection ist zudem das Paket Creative Pack Vol. 1 mit Titel- und Disc-Vorlagen und weiteren Montagethemen enthalten.
Neue Funktionen aus Studio 14 gegenüber den älteren Versionen Bei den nachfolgenden Funktionen handelt es sich um Funktionen, die in der Version 14 neu dazugekommen sind. Natürlich gelten diese auch für die Version 15.
Neue Funktionen in allen drei Programmversionen 쐽 Studio HD Version 14 und 15 sind mit Windows 7 kompatibel und können auf 32-Bit- und 64-Bit-Systemen installiert werden. 쐽 Das Aussehen der Programmoberfläche wurde gegenüber den Vorgängerversionen geringfügig verändert. Die Farbe ist ein wenig abgedunkelt worden, und die Symbole sehen etwas anders aus. Allerdings hat sich an der Philosophie und Arbeitsweise nichts verändert.
Abbildung 1.28: Programmoberfläche von Studio HD Version 14 und 15
42
Neue Funktionen 쐽 Eine völlig neue Funktion ist der Studio Import. In der Version 14 wurde das Einlesen, Kopieren und Übertragen von Videos, Musik und Fotos vereinheitlicht. Diese Aufgaben sind jetzt nur noch über das Studio Import Tool möglich. Egal von welcher Quelle Sie Material einlesen möchten, Sie öffnen immer das Studio Import Tool. Das Studio Import Tool bietet zudem die Möglichkeit, Daten in Ordner zu sortieren, die nach Datum und Zeit der Aufnahme automatisch benannt werden. Näheres dazu lesen Sie in Kapitel 2 „Importieren“.
Abbildung 1.29: Studio Import zum Einlesen von Videos, Musik und Fotos
쐽 Im Studio Import Tool befindet sich eine neue Funktion für Stop Motion, also Trickfilm-Einzelbildaufnahmen. Der Vorteil dieser Funktion liegt darin, dass Studio immer das letzte Bild anzeigt, damit man beim Aufzeichnen von Trickfilmsequenzen schneller arbeiten kann. Weitere Infos zu dieser Funktion finden Sie in Kapitel 2, Abschnitt „Stop Motion“. 쐽 Das Album wurde vollständig überarbeitet. Neu ist, dass es nicht mehr als Buch dargestellt wird, sondern eher als Pool oder ähnlich einem Verzeichnisinhalt. Die Clips und Übergangseffekte usw. werden in einer Liste dargestellt, die mit der Maus gescrollt werden kann.
Abbildung 1.30: Das Album ist nicht mehr als Buch dargestellt, sondern kann nun gescrollt werden
43
Kapitel 1 – Einleitung 쐽 Sobald Sie ein Videoclip auf die Timeline legen, erhält dieser Clip im Album ein kleines Häkchen, damit Sie schnell sehen, welchen Clip Sie bereits verwendet haben. Das funktioniert jetzt auch bei AVCHD- und TOD-Dateien von einer Harddisk- oder Flash-Memory-Kamera. 쐽 Das über einen Rechtsklick erreichbare Kontextmenü wurde in einigen Bereichen erweitert. Damit stehen neue Funktionen zur Verfügung, die das Finden von Clips vereinfachen. Weiteres dazu finden Sie in Kapitel 16 „Tipps & Tricks“. 쐽 Der Stabilizer-Effekt bei den Videoeffekten wurde umfassend überarbeitet. Mit diesem Effekt können Sie verwackelte Videos stabilisieren. Der Effekt wurde vom professionellen Videoschnittprogramm von Avid, dem Media Composer, übernommen. 쐽 Eine neue Funktion ist der Projektcontainer. Dies ist eine erweiterte Funktion des Albums und zeigt alle bereits verwendeten Videos, Fotos, Audioclips und Titel in einer Übersicht an.
Abbildung 1.31: Projektcontainer mit allen verwendeten Clips
쐽 Erweiterte Funktionen der Montagethemen. Schriftart und Größe eines Titeltextes können jetzt in einem Montagethema angepasst werden. Zudem wurde die Funktionalität der Montagethemen erweitert. Neue Montagethemen sind in Version 14 dazugekommen, insgesamt liegen jetzt 132 Montagethemen vor. 쐽 Neue Exportformate sind in Schritt drei, Film erstellen, hinzugekommen. Sie können jetzt direkt aus Studio QuickTime-Filme im MOV-Format sowie die Videoformate PS3, Wii, Xbox sowie MP3-Audiodateien exportieren. Eine weitere Möglichkeit ist, dass Sie Videos als AVCHD-Clips exportieren können, um sie danach wieder zurück auf eine Festplattenkamera zu kopieren. Weitere Infos dazu finden Sie in Kapitel 13 „Film erstellen“. 쐽 In Schritt drei, Film erstellen, kann jetzt ein Teilstück eines Films exportiert werden. Mittels Markern auf der Timeline wird angegeben, welches Teilstück der Timeline exportiert werden soll. Weiteres dazu finden Sie in Kapitel 13 „Film erstellen“.
44
Echtzeit und Rendern
Neue Funktionen in Studio HD Ultimate und Ultimate Collection 쐽 Eine neue Funktion ist der Motion-Titel-Editor. Damit ist es möglich, Videos, Fotos und natürlich Texte einfach mittels einer einfachen Timeline zu animieren.
Abbildung 1.32: Der neue Motion-Titel-Editor
쐽 Pinnacle Studio HD Ultimate und Ultimate Collection enthalten folgende Plug-ins von Drittherstellern, mit denen zusätzliche Effekte erzielt werden können. Mit dem Roto-Effekt von Red Giant ToonIt kann ein Video oder Fotoclip als gezeichneter Trickfilm dargestellt werden. Mit Knoll Light Factory können Lichtreflexe auf ein Clip gelegt werden. Weitere Infos zu den einzelnen Plug-ins entnehmen Sie Anhang A, „Pinnacle Studio HD Ultimate- und Ultimate Collection-Plug-ins“.
Neue Funktion der Studio HD Ultimate Collection 쐽 In der Ultimate Collection Version 14 gibt es vier weitere Plug-ins, um Videos, Fotos und Titelclips zu verändern. Dazu gehören der Shine-Effekt, 3DStroke, Particular von Red Giant und der Looks-Effekt von Magic Bullet. Weitere Infos zu den einzelnen Plug-ins finden Sie in Anhang A, „Pinnacle Studio HD Ultimate- und Ultimate Collection-Plug-ins“.
Echtzeit und Rendern Die Echtzeitvorschau ist eine wichtige Funktion von Studio 15. Nachfolgend wird kurz erklärt, was mit Echtzeit eigentlich gemeint ist.
45
Kapitel 1 – Einleitung
Echtzeit Der PC nimmt uns Arbeiten mit sehr rechenintensiven Aufgaben ab. Eine Textverarbeitung ist für den PC weniger aufwändig zu rechnen als z.B. ein Computerspiel oder eben die Videobearbeitung. Die Textverarbeitung arbeitet mit relativ kleinen Dateien, die Videobearbeitung hingegen mit sehr großen. Eine 60 Seiten umfassende WordDatei benötigt ca. 280 KByte Speicherplatz, eine Stunde Video in Standard oder High Definition (MiniDV mit 720 x 576 Pixel bzw. MPEG-2 mit 1920 x 1080 Pixel) dagegen ca. 13 GByte, (13 000 000 KByte), also etwa 46 000-mal mehr Speicherplatz. Da nun eine Videoschnittsoftware mit sehr großen Dateien und vielen Daten arbeitet, ist der Benutzer darauf angewiesen, dass z.B. eine Videosequenz in normaler Geschwindigkeit abgespielt wird. Wenn das der Fall ist, wird das Video in „Echtzeit“ angezeigt. Sicherlich sagen Sie nun, das ist ja logisch. Früher waren die PCs nicht leistungsstark genug, darum wurde das Videomaterial mit einer speziellen Hardware codiert und komprimiert, damit es ruckelfrei abgespielt werden konnte. Der Begriff Echtzeit bekommt eine ganz andere Bedeutung, wenn das Video durch Effekte und Übergänge ergänzt wird. Wird z.B. bei einem einminütigen Videoclip eine Farbkorrektur durchgeführt, muss der PC das Video komplett neu rechnen, im Prinzip erhält jedes Pixel im Video eine neue Farbe: Für die Standard-Auflösung in PAL wären das 720 x 576 Pixel (414 720) mal 25 Bilder in der Sekunde mal 60 in der Minute. Für Full High Definition sogar fünfmal mehr, also 1920 x 1080 Pixel (2 073 600) mal 25 Bilder in der Sekunde mal 60 in der Minute. Die Videoschnittsoftware muss also für eine Minute Full HD Video 3 110 400 000 einzelnen Pixeln eine neue Farbe geben. Echtzeit heißt in diesem Fall, dass die Umrechnung eines jeden Pixels während des Abspielens des Videos erfolgt. Wird nun über diesen einminütigen Videoclip im Videoschnittprogramm ein Titel angezeigt, muss das Programm zusätzlich diesen Titel ins Bild rechnen. Es geht nun also um zwei Effekte. Je mehr Effekte, Übergänge, Videoclips, Audioclips usw. gleichzeitig angezeigt werden müssen, umso mehr muss auch gleichzeitig gerechnet werden. Grundsätzlich stehen Ihnen zwei Möglichkeiten zur Verfügung, um diese aufwändigen Rechenaufgaben zu lösen. Wenn Ihr PC über eine AGP- oder PCI-Express-Grafikkarte mit mindestens 64 MByte Arbeitsspeicher verfügt, die darüber hinaus kompatibel zu Pinnacle Studio HD ist (dies sind nur Grafikkarten der Herstellerfirmen ATI und NVIDIA), können diese Rechenaufgaben in Echtzeit über die Grafikkarte ausgeführt werden. Wenn Sie mit High Definition Video arbeiten, ist eine Grafikkarte mit mindestens 256 MByte Arbeitsspeicher notwendig. Weitere Infos zum Thema Kompatibilität finden Sie auf der Pinnacle-Homepage: http://www.pinnaclesys.de. Ihr PC verfügt nicht über die Echtzeitvorschau und muss alle Effekte zuerst rechnen und auf der Festplatte zwischenspeichern? Das ist kein Problem, dauert einfach nur etwas länger und Sie müssen warten, bis der Rechenvorgang beendet ist, damit Sie die Effekte ruckelfrei betrachten können.
46
Einführung in Pinnacle Studio HD
Rendern Unter Rendern versteht man eigentlich nichts anderes als Rechnen. Effekte, Übergänge usw. werden vom PC in neue Dateien zusammengerechnet. Beim Rendern entstehen also neue, temporäre Daten (Render-Dateien), damit die ursprünglichen Daten unverändert bleiben. Im Grunde heißen diese Daten nur temporär, da sie jederzeit vom PC neu berechnet werden können. Sobald die Render-Dateien gelöscht werden, muss Pinnacle Studio HD sie neu erstellen.
Einführung in Pinnacle Studio HD Grundsätzlich wird in jedem Videobearbeitungsprogramm immer gleich gearbeitet. Als Erstes müssen das gefilmte Videomaterial, Fotos und Musik von der Kamera oder einer Festplatte auf den PC übertragen werden. Dann kann mit dem Bearbeiten begonnen werden. Unter Bearbeiten oder Schneiden versteht man die Herstellung des eigentlichen Films. Dazu gehören das Schneiden des Videomaterials, das Bearbeiten von Audio, Titeln, Effekten, Übergängen usw. – ja sogar das Hinzufügen von DiscMenüs. Der letzte Schritt ist dann die Ausgabe auf ein Medium, das am Fernseher oder PC betrachtet werden kann. Diese logische Reihenfolge wird auch in Pinnacle Studio HD eingehalten, und entsprechend ist das Programm aufgebaut. Die Bearbeitung erfolgt in drei Schritten: 1. Importieren 2. Bearbeiten 3. Film erstellen
Abbildung 1.33: Die drei Arbeitsschritte in Pinnacle Studio HD
Klicken Sie auf den jeweiligen Knopf, um Pinnacle Studio HD in den entsprechenden Modus zu versetzen. Statt sich gleich auf das Bearbeiten und Schneiden zu stürzen, sollten Sie Ihr Projekt unbedingt sauber beginnen und eine logische Datenstruktur auf der Festplatte erstellen, damit Sie später alle Daten zu einem Projekt eindeutig identifizieren können. So haben Sie einerseits Ordnung auf dem PC und andererseits können Sie Projekte einfacher löschen, sichern und kopieren.
Das erste Projekt Verzeichnisstruktur auf der Festplatte Beim Erstellen eines neuen Projekts ist es empfehlenswert, dieses von Anfang an gut zu organisieren. Das erleichtert das Auffinden des Projekts selbst und der entsprechenden Daten auf der Festplatte. Wenn Sie in Pinnacle Studio HD einen Film erstellen, werden Sie zusätzliche Bilder und Musikdateien darin integrieren wollen. Insofern gehören immer verschiedene Daten zu einem Projekt. Die Video-, Bild- und Musikdateien sollten daher logisch auf der Festplatte angeordnet werden. Am sinnvollsten wäre es, alle rele-
47
Kapitel 1 – Einleitung vanten Daten zu einem Projekt in einem Unterordner zu speichern, dann werden Sie die Daten besser finden und auch wieder löschen können. Alles, was in Pinnacle Studio HD später bearbeitet wird, wird nicht in Pinnacle Studio HD selbst gespeichert, sondern von der Festplatte aus in das Pinnacle Studio HD-Projekt referenziert. Das heißt, dass Pinnacle Studio HD ständig Zugriff auf alle Dateien haben muss. Wenn Sie also einen Videoclip in Pinnacle Studio HD bearbeiten und diesen Clip später von der Festplatte löschen oder verschieben, ist auch das Projekt nicht mehr bearbeitbar. Der Film kann nicht mehr abgespielt werden. Es ist also enorm wichtig, die Datenstruktur vor dem Arbeiten mit Pinnacle Studio HD zu überdenken. Ich empfehle Ihnen, eine präzise Ordnerstruktur für jedes Projekt anzulegen. Als Hauptordner für alle Projekte wäre ein Ordner namens Projekte oder Pinnacle Studio HD sinnvoll. In diesem Ordner wird für jedes Projekt ein neuer Unterordner erzeugt, in dem alle dazugehörigen Daten gespeichert werden. Das können Bilder, Videos, Musik usw. sein. Erstellen Sie als Beispiel die oben erwähnte Verzeichnisstruktur, am besten auf einer anderen Festplatte bzw. Partition als C:, da dort keine Daten gespeichert werden sollen. Anleitung für Windows XP 1. Öffnen Sie den Windows-Explorer mit einem Rechtsklick auf den Start-Knopf und wählen Sie Explorer oder doppelklicken Sie auf das Desktopsymbol Arbeitsplatz. 2. Klicken Sie einen Laufwerksbuchstaben an, unter dem Sie die Projekte speichern möchten, danach klicken Sie auf Datei/Neu/Ordner, um einen neuen Ordner zu erstellen. 3. Geben Sie dem neuen Ordner einen Namen, z.B. Projekte. 4. Doppelklicken Sie auf den soeben erstellten Ordner und erzeugen Sie, wie unter Schritt 2 beschrieben, einen neuen Unterordner für das erste Projekt. 5. Geben Sie dem neuen Ordner den Namen Ihres ersten Projekts. Anleitung für Windows 7 und Vista 1. Lassen Sie sich die Festplatten des PCs anzeigen, indem Sie auf Start klicken und dann Computer auswählen.
Abbildung 1.34: Doppelklicken Sie auf die Festplatte, auf der Sie das Projekt speichern möchten
48
Das erste Projekt 2. Doppelklicken Sie auf die Festplatte oder Partition, auf der Sie das Projekt speichern möchten. 3. Klicken Sie mit der rechten Maustaste auf einen leeren Bereich und wählen Sie Neu und dann Ordner. 4. Versehen Sie den soeben erstellten Ordner mit einem Namen, z.B. Projekte. 5. Erstellen Sie nun in diesem Ordner für jedes Projekt einen Unterordner und benennen Sie ihn nach dem zu erstellenden Projekt. Für jedes neue Projekt sollten Sie einen neuen Unterordner in Projekte erstellen. Kopieren Sie alle relevanten Daten für das Projekt in diesen Unterordner. Sie können auch weitere Unterordner in diesem Projektordner erstellen, damit Sie einen besseren Überblick über Ihre Daten haben. Wenn Sie sich gleich von Anfang an an diese Ordnerstruktur gewöhnen, fällt es Ihnen leichter, die Daten wiederzufinden und später zu löschen, um Platz auf den Festplatten zu bekommen.
Projekt erstellen Sobald Sie Pinnacle Studio HD gestartet haben, empfiehlt es sich, eigens ein neues Projekt zu erstellen, auch wenn in Pinnacle Studio HD im Prinzip ein neues leeres Projekt geöffnet wurde. So können Sie nämlich bereits jetzt selbst festlegen, wo die Projektdatei gespeichert wird. Ein Projekt ist die Umgebung, in der ein Film geschnitten wird. Alle Videoclips, Musikdateien, Fotos usw. werden in das Projekt integriert (verknüpft bzw. referenziert). Wenn Sie einen Videoclip in Pinnacle Studio HD bearbeiten und währenddessen auf der Festplatte löschen, so ist auch das Projekt nicht mehr brauchbar, da Pinnacle Studio HD lediglich die Referenz gespeichert hat. Seien Sie also vorsichtig, wenn Sie etwas auf der Festplatte löschen. Ebenfalls wird davon abgeraten, Daten auf einer Festplatte neu zu organisieren, während Sie mit Pinnacle Studio HD arbeiten. 1. Wählen Sie aus dem Menü Datei und danach Neues Projekt. Pinnacle Studio HD erstellt ein neues leeres Projekt. 2. Speichern Sie das Projekt an einem bestimmten Ort, indem Sie aus dem Menü Datei/Projekt speichern wählen. Am besten wählen Sie hier den Ordner wie oben beschrieben. 3. Suchen Sie auf der Festplatte Ihren Projektordner und wählen Sie ihn als Speicherort für die Projekte aus. 4. Wählen Sie einen Namen für das Projekt und klicken Sie auf Speichern, um den Dialog zu schließen.
49
Kapitel 1 – Einleitung
Abbildung 1.35: Der Dialog Speichern unter für Windows 7
Achten Sie darauf, dass zu einem Projekt immer zwei Dinge gehören. Zum einen ist das eine Datei mit der Endung .stx, zum anderen ein Ordner, der allerdings nicht geöffnet werden kann. Sie können das sehen, wenn Sie im Windows-Explorer den Inhalt des Projektordners anzeigen lassen. Da Pinnacle Studio HD 15 seit der Version 10 im Vergleich zu den Vorgängerversionen etwas anders arbeitet, wurden auch die Projekte anders aufgebaut. In diesem Ordner befinden sich alle projektrelevanten Daten für Pinnacle Studio HD 15, die vom Benutzer nicht verändert werden sollten.
Abbildung 1.36: Das erste Pinnacle Studio HD 15-Projekt auf der Festplatte betrachtet
Wenn Sie ein Projekt verschieben oder löschen möchten, so muss das immer gleichzeitig bei dem Ordner und der .stx-Datei geschehen. Tipp
Sie sollten nie ein Projekt im Windows-Explorer umbenennen. Es kann nämlich vorkommen, dass ein umbenanntes Projekt von Studio nicht mehr erkannt wird und somit Ihre ganze Arbeit verloren geht. Wenn Sie aber trotzdem ein Projekt umbenennen möchten, dann können Sie dies in Studio im Menü Datei/Projekt umbenennen tun.
50
Wichtige Einstellungen
Versionen speichern Wenn Sie große und komplexe Projekte bearbeiten, sollten Sie regelmäßig eine Version des Projekts abspeichern und eventuell auch auf einem anderen Datenträger sichern. Beim Sichern eines Projekts empfiehlt es sich, ebenfalls alle Clips (Video, Audio und Bilder) zu speichern, da das Projekt sonst nicht mehr verwendet werden kann. Wenn Sie sich an die oben beschriebene Projektverwaltung halten, können Sie einen ganzen Projektordner auf einen anderen Datenträger kopieren. So bleiben alle nötigen Daten zusammen. Das Speichern von Versionen ist insofern nützlich, als Sie dann immer auf einen alten Stand Ihres Projekts zugreifen können. So speichern Sie eine neue Version des Projekts ab: 1. Wählen Sie aus dem Menü Datei und danach Projekt speichern als. 2. Im Speichern-Dialog wählen Sie einen Speicherort. 3. Wählen Sie einen neuen Namen für die zu speichernde Version, z.B. zuerst den Projektnamen und dann das Datum.
Projekt umbenennen Wenn Sie ein Projekt nach dem Erstellen umbenennen möchten, so machen Sie das auf keinen Fall im Windows-Explorer, sondern (wie folgt) in Pinnacle Studio HD: 1. Öffnen Sie das Projekt, das umbenannt werden soll, mit Datei/Projekt öffnen. 2. Suchen Sie das Projekt auf der Festplatte und klicken Sie in dem Dialog auf OK. 3. Wählen Sie aus dem Menü Datei/Projekt umbenennen. 4. Geben Sie im Dialogfenster Projekt umbenennen einen neuen Namen für das Projekt in das Textfeld ein.
Abbildung 1.37: Projekt umbenennen
5. Klicken Sie auf OK, damit die Änderung übernommen wird.
Wichtige Einstellungen Bevor Sie mit Pinnacle Studio HD zu arbeiten beginnen, empfiehlt es sich, einige Einstellungen vorzunehmen, damit bereits von Anfang an richtig und am richtigen Ort gearbeitet wird.
Temporäre Daten Beim Bearbeiten von Video muss Pinnacle Studio HD ständig temporäre Daten auf der Festplatte speichern. Das können sehr große Datenmengen sein. Je nach Festplattenkonfiguration sollten Sie den Ort für diese Daten selbst bestimmen, um noch mehr Leistung aus Ihrem PC herauszuholen. Wie bereits im Abschnitt zur Festplattenkonfi-
51
Kapitel 1 – Einleitung guration beschrieben, könnten Sie ein eigenes Laufwerk nur für die temporären Daten verwenden. Das hätte den Vorteil, dass eine weitere Festplatte für die Arbeit mit Pinnacle Studio HD eingesetzt wird und somit noch mehr Leistung erzielt würde. Falls Sie den Speicherort für diese Daten nicht selbst definieren, werden diese auf dem Laufwerk C: abgespeichert, was nur selten sinnvoll ist. Die Verwaltung der temporären Daten übernimmt Pinnacle Studio HD selbst, darum müssen Sie sich nicht kümmern. Alle temporären Daten werden darüber hinaus immer im gleichen Ordner gespeichert und nicht zusammen mit dem Projekt. Die temporären Dateien bzw. Render-Dateien können zu jeder Zeit auf der Festplatte gelöscht werden, ohne dass etwas vom Projekt verloren geht. Allerdings müssen sie neu berechnet werden, falls der Film exportiert wird. Löschen Sie diese also erst, wenn Sie das Projekt vollständig beendet und exportiert haben. Wählen Sie den Speicherort für die Render-Dateien wie folgt: 1. Erstellen Sie auf der Festplatte einen neuen Ordner für die temporären Dateien bzw. Render-Dateien und nennen Sie ihn z.B. Render. 2. Wählen Sie aus dem Menü Setup die Projekt-Voreinstellungen.
Abbildung 1.38: Projekt-Voreinstellungen
3. Klicken Sie unter Ordner für Hilfsdateien auf das kleine Ordnersymbol. 4. Wählen Sie aus der Liste den oben erstellten Ordner aus. 5. Klicken Sie auf OK, um den Dialog zu beenden.
52
Wichtige Einstellungen
Abbildung 1.39: Ordner für temporäre Daten
Projekt automatisch speichern Eine wichtige Funktion von Pinnacle Studio HD ist die Instant-Save-Funktion. Sie dient dazu, jeden Schritt in Pinnacle Studio HD automatisch zu speichern. Die Instant-SaveFunktion ist immer im Hintergrund eingeschaltet, damit Sie nichts verlieren, auch wenn der PC einmal abstürzen sollte. Eine zusätzliche Funktion ist die Projekte automatisch speichern und laden-Funktion. Diese dient dazu, das letzte geöffnete Projekt automatisch zu öffnen, wenn Pinnacle Studio HD gestartet wird. Diese Funktion benötigt allerdings Ressourcen auf dem PC, und es dauert einiges länger, wenn Sie Studio starten, da immer das zuletzt bearbeitete Projekt geladen bzw. geöffnet wird. Darum empfehle ich, diese Funktion nicht zu aktivieren. Falls Sie sie aber trotzdem wünschen, gehen Sie wie folgt vor: 1. Wählen Sie aus dem Menü Setup die Projekt-Voreinstellungen. 2. Unter Arbeitsumgebung wählen Sie die Option Projekte automatisch speichern und laden.
Abbildung 1.40: Projekte automatisch speichern und laden
3. Klicken Sie auf OK, um den Dialog zu beenden.
53
Kapitel 1 – Einleitung Hinweis
Sämtliche Bearbeitungen und Schritte, die Sie in Pinnacle Studio HD machen, werden immer automatisch gespeichert, unabhängig davon, ob Sie die Option Projekte automatisch speichern und laden aktiviert haben oder nicht.
Premium-Inhalt und Premium-Funktionen ausblenden Premium-Inhalt und Premium-Funktionen sind zusätzliche Pakete von Pinnacle Studio HD. Diese Pakete können Sie erst verwenden, nachdem Sie diese online über den Shop von Pinnacle Systems freigeschaltet haben. Wenn Sie diese Funktionen nicht erwerben möchten, können Sie sie ausschalten, sodass sie beim Arbeiten mit Pinnacle Studio HD nicht auftauchen. Um die Funktionen auszublenden, gehen Sie wie folgt vor: 1. Wählen Sie aus dem Menü Setup die Projekt-Voreinstellungen. 2. Entfernen Sie die beiden Häkchen bei Premium-Inhalt anzeigen und Premium-Funktionen anzeigen.
Abbildung 1.41: Premium-Inhalt und Premium-Funktionen ausblenden
3. Schließen Sie das Fenster mit einem Klick auf OK.
Projektformat In Pinnacle Studio HD können Projekte in verschiedenen Videoauflösungen und Seitenverhältnissen bearbeitet werden. 4:3 und 16:9 sind Seitenverhältnisse eines Videobildes. Die erste Zahl steht für die Breite und die zweite für die Höhe des Fernsehbildes. Wählen Sie eine Projekteinstellung, wenn Sie ein definiertes Format verwenden möchten. Falls Sie nicht wissen, welche Einstellung Sie einsetzen müssen, wird die Einstellung automatisch vom ersten Clip übernommen, der in Pinnacle Studio HD bearbeitet wird. Das Format sollte manuell angepasst werden, wenn Sie in Pinnacle Studio HD verschiedene Formate miteinander mischen möchten. Daher müssen Sie sich vor der Bearbeitung überlegen, welches Format der Film am Schluss haben wird. Wenn Sie z.B. in einen High-
54
Wichtige Einstellungen Definition-Film normales SD-Videomaterial integrieren möchten, wird das SD-Material viel schlechter oder kleiner dargestellt als das High-Definition-Video-Material. Umgekehrt müsste das High-Definition-Video-Material verkleinert oder abgeschnitten werden. 1. Wählen Sie aus dem Menü Setup die Projekt-Voreinstellungen. 2. Klicken Sie auf Format für neue Projekte. 3. Wählen Sie nun aus der Liste das gewünschte Format aus.
Abbildung 1.42: Projektformat für die Timeline
4. Schließen Sie den Dialog mit einem Klick auf OK.
Standarddauer für Übergänge, Titel und Bilder Beim Einfügen eines Titels, Übergangseffekts oder Standbildes wird von Pinnacle Studio HD eine vordefinierte Länge verwendet. Wenn Sie bereits vor dem Einfügen wissen, wie lange ein Standbild später angezeigt werden soll, können Sie das vorher definieren. Die Länge eines einzelnen Bildes kann jederzeit nachträglich auf der Timeline angepasst werden. Diese Funktion dient lediglich dazu, dass alle neu in die Timeline eingefügten Elemente eine bestimmte Länge haben. Wenn Sie also eine lange Diashow mit vielen Bildern erstellen möchten, definieren Sie die Standardlänge der Bilder vor dem Einfügen in die Timeline. Die Länge der Bilder, die bereits auf der Timeline sind, wird mit dieser Einstellung nicht verändert.
55
Kapitel 1 – Einleitung Verändern Sie die Voreinstellung wie folgt: 1. Wählen Sie aus dem Menü Setup/Projekt-Voreinstellungen. 2. Unter Standarddauer verändern Sie die Werte durch Klicken auf die Pfeile nach oben und unten oder geben über die Tastatur einen anderen Wert ein. 3. Schließen Sie den Dialog mit einem Klick auf OK.
Abbildung 1.43: Anpassen der Standarddauer für Titel, Bilder und Standbilder
Videovorschau Beim Bearbeiten von Videos ist es sehr praktisch, das Videobild auf einem externen Gerät oder einem zweiten Monitor zu betrachten. So können Sie bereits während der Bearbeitung sehen, wie das Ganze später aussehen wird. Je nachdem, über welche Hardware Sie verfügen oder ob Sie einen zweiten Monitor angeschlossen haben, sieht diese Einstellung etwas anders aus. Für das Arbeiten an einem Laptop kann der zweite Videoausgang auf einen Computermonitor umgeleitet werden, um das Videobild darauf in der Vorschau zu sehen. Allerdings muss der PC diese Funktion unterstützen. Um die Videovorschau einzustellen, gehen Sie wie folgt vor: 1. Wählen Sie im Menü Setup die Video- und Audio-Voreinstellungen. 2. Wählen Sie die Option Vorschau mit voller Auflösung, wenn Sie diese so anzeigen möchten. 3. Unter Vollbild wählen Sie Sekundär-VGA-Monitor, falls Sie einen angeschlossen haben, oder wählen Sie unter Extern die angeschlossene Hardware aus. 4. Schließen Sie das Fenster mit einem Klick auf OK.
56
Wichtige Einstellungen
Abbildung 1.44: Einstellungen der Videovorschau
5. Um die Vorschau zu aktivieren, wechseln Sie zu Schritt 2 Bearbeiten. 6. Klicken Sie auf den Vorschauknopf über dem Vorschaufenster, um die Vorschau anzuzeigen.
Abbildung 1.45: Vorschau aktivieren
Die Vorschau ist erst möglich, wenn mindestens ein Clip auf der Timeline liegt. Um die Vorschau zu beenden, klicken Sie auf (Esc). Wenn Sie mit HDV-Videomaterial arbeiten und einen Monitor mit einer Mindestauflösung von 1920 x 1080 Pixel angeschlossen haben, können Sie gleich die Qualität am Bildschirm betrachten.
Hintergrund-Rendering Das Berechnen der Effekte und Übergänge in Pinnacle Studio HD ist abhängig von Ihrer Grafikkarte. Wenn diese von Pinnacle Studio HD unterstützt wird und über genügend Speicher verfügt, werden die Effekte während des Abspielens berechnet und angezeigt. Das wird Echtzeit-Rendering genannt, da die Effekte zuvor nicht speziell berechnet wer-
57
Kapitel 1 – Einleitung den müssen. Wenn nun die Grafikkarte oder das PC-System nicht über die nötigen Hardwarevoraussetzungen bzw. die Mindestanforderungen verfügt, müssen Effekte zuerst gerendert und als neue Videoclips auf der Festplatte gespeichert werden. Erst dann ist es möglich, diese ruckelfrei anzuzeigen. Sie können selbst testen, ob Ihr PC über genügend Leistung verfügt, indem Sie zwei Clips auf die Timeline legen und dazwischen einen Übergangseffekt einfügen. Während des Abspielens des Films sollte er nun ruckelfrei angezeigt werden. Wenn das nicht der Fall ist, sollten Sie das Hintergrund-Rendering einschalten, damit alle Effekte sofort berechnet werden. Diese Berechnung geschieht, wie der Name schon sagt, im Hintergrund, und Sie können dabei weiterarbeiten. Um das Hintergrund-Rendering einzuschalten, gehen Sie wie folgt vor: 1. Wählen Sie im Menü Setup/Video- und Audio-Voreinstellungen.
Abbildung 1.46: Einstellung für das Hintergrund-Rendering
2. Wählen Sie unter Hintergrund-Rendern die Option Hintergrund-Rendern aktivieren. 3. Schließen Sie den Dialog mit einem Klick auf OK. Die gerenderten Dateien werden in einem speziellen Format wie das Video auf der Timeline gespeichert. Im Beispiel wird DV-Videomaterial eingesetzt, das wiederum als DV berechnet wird. Sie können den Codec auch manuell setzen, was aber dazu führen kann, dass die gerechneten Videos in schlechterer Qualität gespeichert werden als der Originalfilm.
Surround-Sound-Wiedergabe Wenn Sie in Ihrem Film Surround-Sound bearbeiten und diesen während des Bearbeitens hören möchten, müssen Sie über ein Surround-Sound-System mit 6 Lautsprechern verfügen. Diese Einstellung hat nichts damit zu tun, ob das Audio im Film auf Surround-Sound abgemischt wird oder nicht, es geht hier lediglich um das Mithören beim Bearbeiten. Um diese Option einzustellen, gehen Sie wie folgt vor:
58
Wichtige Einstellungen 1. Wählen Sie im Menü Setup/Video- und Audio-Voreinstellungen.
Abbildung 1.47: Surround-Sound-Wiedergabe aktivieren
2. Klicken Sie unter Surround-Sound die Option Diskrete 5.1 Surround-Sound-Wiedergabe aktivieren an. 3. Klicken Sie auf OK, um den Dialog zu beenden.
Musik von CD auslesen Sie können in Pinnacle Studio HD Musik direkt von einer Audio-CD in das Projekt kopieren. Dazu müssen Sie unter Umständen in Pinnacle Studio HD zuerst einstellen, von welchem Laufwerk das geschehen soll. Diese Einstellung ist wichtig, falls Sie über mehrere CD- oder DVD-Laufwerke verfügen. Gehen Sie dazu wie folgt vor: 1. Wählen Sie im Menü Setup/Video- und Audio-Voreinstellungen.
Abbildung 1.48: CD-Laufwerk einstellen
59
Kapitel 1 – Einleitung 2. Unter CD-Laufwerk (für das Auslesen von Audiodateien) wählen Sie aus der DropdownListe das gewünschte CD-Laufwerk aus. 3. Schließen Sie den Dialog mit einem Klick auf OK. Wenn Sie in Pinnacle Studio HD später eine CD einlesen möchten, müssen Sie diese in das gewählte Laufwerk einlegen.
Mikrofoneinstellungen Für das Nachvertonen von Filmen müssen Sie ein Mikrofon an die Soundkarte Ihres PCs anschließen. Falls Sie über verschiedene Anschlüsse verfügen, muss in Pinnacle Studio HD angegeben werden, an welchem Anschluss das Mikrofon ist. Wenn Sie das nicht wissen, sollten Sie das Handbuch der Soundkarte oder Ihres PCs zu Hilfe nehmen. Die Anschlüsse der Soundkarte sind farbig codiert: Grün für Lautsprecherausgabe, Blau für Line-In und Pink für Mikrofonanschluss. Für die Einstellung in Pinnacle Studio HD gehen Sie wie folgt vor: 1. Wählen Sie im Menü Setup/Video- und Audio-Voreinstellungen.
Abbildung 1.49: Mikrofoneinstellungen
2. Wählen Sie aus der Liste unter Mikrofon den richtigen Eingang. Unter Kanäle wählen Sie Stereo oder Mono und unter Samplerate die Qualität der Aufnahme. 16-Bit mit 44.1 kHz entspricht der CD-Qualität. 3. Schließen Sie den Dialog mit einem Klick auf OK.
Erweiterungen mit Premium-Inhalt Pinnacle Studio HD wird mit vielen Übergängen, Effekten und Funktionen ausgeliefert, die Ihnen gleich zur Verfügung stehen. Dieser bereits bestehende Funktionsumfang kann noch erweitert werden. Die zusätzlichen Erweiterungen sind kostenpflichtig und können online freigeschaltet werden. Sie werden Premium-Inhalt und Premium-Funktionen genannt. Einige dieser Zusatzfunktionen sind bereits in Pinnacle Studio HD integriert, haben aber ein Wasserzeichen im Bild und müssen vor dem Anwenden freigeschaltet werden.
60
Wichtige Einstellungen Um den Funktionsumfang auf einem PC, der am Internet angeschlossen ist, zu erweitern, gehen Sie wie folgt vor: 1. Klicken Sie auf das Symbol Schatzkiste in Pinnacle Studio HD, um zum Onlineshop von Pinnacle zu gelangen. Das Schatzkistensymbol erscheint automatisch immer dann, wenn Sie Effekte und Funktionen erwerben können, oder es ist oben rechts in Studio zu sehen.
Abbildung 1.50: Das Schatzkistensymbol erscheint dann, wenn Sie Effekte und Funktionen freischalten können
2. Wenn der PC am Internet angeschlossen ist, gelangen Sie auf eine Internetseite, von der Sie die Effekte und Plug-ins freischalten können.
Abbildung 1.51: Internetseite für das Auswählen der Effekte und Plug-ins
3. Wählen Sie die Effekte, die Sie kaufen und freischalten möchten, folgen Sie den Bildschirmanweisungen und geben Sie die geforderten Informationen ein. Für den Erwerb dieser Effekte ist eine Kreditkarte notwendig. Falls Sie keine direkte Internetverbindung besitzen, können Sie die Effekte unter folgender Internetadresse freischalten lassen: http://unlock.pinnaclesys.com Geben Sie nun die gewünschten Angaben zu Ihrem Produkt ein. Die Seriennummer und den Passport können Sie sich in Studio unter Hilfe und dann Passport anzeigen anzeigen lassen. Sobald Sie die Codes erworben haben, müssen Sie diese in Studio eingeben, damit die Funktionen freigeschaltet werden. Klicken Sie dazu unter Hilfe auf Aktivierungscodes eingeben.
61
Kapitel 1 – Einleitung
Abbildung 1.52: Geben Sie hier die erworbenen Codes ein, um die Funktionen zu aktivieren
Achtung
Es kann durchaus vorkommen, dass Sie Windows auf Ihrem PC neu installieren müssen oder Studio auf einem anderen PC installieren möchten. Danach müssen Sie natürlich auch Pinnacle Studio HD neu installieren. Nur bekommen Sie dabei leider einen neuen Passport, und alle bereits erworbenen Effekte und Funktionen lassen sich nicht mehr aktivieren. Sie müssen also auf der Internetseite von Pinnacle Ihre Daten neu generieren lassen. Gehen Sie dazu auf folgende Internetseite: http://unlock.pinnaclesys.com/premiumcontent/ regenerate_keys.aspx?Langue_ID=4&loc=lMen1810 Die Internetseite wird geöffnet, und jetzt können Sie die nötigen Daten eingeben.
Abbildung 1.53: Geben Sie hier alle Informationen ein, um neue Aktivierungscodes zu generieren
Die neuen Codes werden Ihnen per E-Mail zugesandt.
62
2 Importieren
Bevor Sie mit dem Bearbeiten von Videos, Fotos und Musik beginnen können, müssen diese Daten von Ihrer Videokamera oder einem Fotoapparat auf den PC überspielt werden. Dies funktioniert mit der Importieren-Funktion von Studio HD. Die ImportierenFunktion wurde komplett überarbeitet und vereinheitlicht. Egal ob Sie von einer digitalen oder analogen Quelle einlesen möchten, Sie benutzen immer die gleiche Funktion. Das Importieren bzw. Überspielen von Video bedeutet, dass die Videosequenzen in Echtzeit, d.h. in normaler Abspielgeschwindigkeit, von einem Videoband auf den PC übertragen werden. Befinden sich die Dateien bereits auf der Festplatte einer Kamera, einem Speicherchip oder einem anderen Datenträger wie DVD, Blu-ray oder Festplatte, werden die Videos und Fotos einfach auf den PC kopiert. Die Studio HD Import-Funktion können Sie starten, indem Sie auf den Button importieren klicken oder im Menü Ansicht die Funktion importieren wählen.
Abbildung 2.1: Studio Import-Assistent
63
Kapitel 2 – Importieren
Importieren von Auf der linken oberen Ecke befindet sich die Funktion importieren von. Hier wählen Sie aus, von welcher Quelle Videos, Fotos und Audiodateien importiert werden sollen. Falls Ihre Kamera in der Liste nicht angezeigt wird, überprüfen Sie die Verbindung oder beenden das Import Tool und starten es noch einmal.
Abbildung 2.2: Hier geben Sie an, von welcher Quelle Videos, Fotos und Musik importiert werden sollen
Importieren nach Bevor Sie eine Aufnahme beginnen, sollten Sie die PC-Festplatte und den Speicherort für die Videodateien wählen. Wählen Sie unter importieren nach, wohin die Daten auf dem PC kopiert oder verschoben werden sollen. Sie können für Videos, Audios und Fotos unterschiedliche Ordner angeben. Wie bereits im Abschnitt zur Computerkonfiguration beschrieben, ist es sinnvoll, für die Videodaten eine eigene Festplatte zu benutzen. Sie sollten hier also diese Festplatte auswählen und, wenn möglich, die beschriebene Projektstrukturierung beibehalten. Speichern Sie die Videoclips in einem Unterordner des aktuellen Projekts, damit sie schneller auffindbar sind. Alle Videoclips, die auf den PC übertragen werden, können später in verschiedenen Projekten benutzt werden. Entscheiden Sie selbst, wie Sie die Daten auf der Festplatte organisieren möchten, wenn das der Fall ist. Achten Sie unbedingt darauf, wie Sie die Videodateien benennen und wo sie abgespeichert sind, damit Sie stets den Überblick behalten und alte Projekte einfach und schnell löschen können. Achtung
Es ist wichtig, dass Sie sich bewusst sind, wohin die Videodateien gespeichert werden, damit Sie die Dateien einerseits wiederfinden und andererseits nicht auf eine falsche Festplatte aufnehmen. Wenn Sie die Videodateien auf eine externe Festplatte aufnehmen möchten, sollten Sie vorher wissen, welcher Laufwerksbuchstabe dieser Festplatte zugewiesen wurde. Wählen Sie in Pinnacle Studio diese Festplatte wie weiter unten beschrieben aus.
64
Importieren nach
Abbildung 2.3: Hier geben Sie an, wohin die Daten kopiert werden sollen
Mit dem Studio Import Tool ist es möglich, die zu importierenden Daten in Unterordner zu sortieren, z.B. nach Aufnahmezeit und Datum. Während des Kopierens der Daten erstellt Studio HD automatisch Unterverzeichnisse, z.B. mit dem Namen des Datums der Aufnahme der Clips, und wählt als Dateiname der Clips die Aufnahmezeit. Dies erleichtert später das Auffinden der einzelnen Clips enorm.
Ordner auswählen Klicken Sie auf das kleine Ordnersymbol, um einen Ordner für die Video-, Audio- und Fotodateien auszuwählen.
Abbildung 2.4: Mit einem Klick auf das Ordnersymbol bzw. den Verzeichnisnamen wird das Zielverzeichnis ausgewählt
Ein Fenster öffnet sich, in dem Sie den Zielordner wählen, in den die Clips kopiert werden.
Weitere Einstellungen Klicken Sie auf das Dreieckssymbol oder auf Unterordner wählen, um weitere Einstellungen vorzunehmen, wie die Daten in Unterordner kopiert werden sollen.
65
Kapitel 2 – Importieren
Abbildung 2.5: Unter Weitere Einstellungen wird definiert, wie die Unterordner automatisch erstellt werden
In den Einstellungen können Sie jeweils unter Unterordner auswählen, ob beziehungsweise wie die Unterordner während des Importierens der Daten automatisch erstellt werden sollen.
Abbildung 2.6: Wählen Sie hier, wie die Unterordner erstellt werden sollen
Klicken Sie auf die Dropdown-Liste bei Unterordner, um die Art der Unterordner auszuwählen.
Abbildung 2.7: Wählen Sie eine Art, wie die Unterordner erstellt werden sollen
Mit der Option Individuell können Sie selbst einen Namen für die Erstellung eines neuen Unterordners angeben. Mit heute und Aktueller Monat wird der Unterordner entsprechend der Einstellung mit dem ausgewählten Datum erstellt. Mit der Option Aufnahmedatum wird während des Kopierens der Clips das Aufnahmedatum jedes Clips überprüft. Das Studio Import Tool erstellt während des Kopierens der Clips Unterordner, die mit dem Aufnahmedatum der Clips benannt werden und kopiert diese.
66
Optionen Mit der Funktion zurücksetzen können Sie die Einstellungen auf die Standards zurücksetzen.
Optionen Auf der rechten Seite befinden sich zwei weitere Optionen-Fenster, in denen Sie angeben können, wie die Daten auf den PC kopiert werden sollen. Unter Modus geben Sie an, ob die Daten der Quelle verbleiben oder nach dem Kopieren gelöscht werden sollen. Wenn Sie von einem Band importieren, können Sie hier angeben, in welchem Dateiformat und in welcher Qualität die Daten importiert werden sollen. Im unteren Fenster unter Dateiname können Sie beeinflussen, wie die Daten benannt werden sollen.
Abbildung 2.8: Geben Sie hier an, wie die Daten auf den PC kopiert werden sollen
Szenenerkennung Auf der rechten Seite unter Modus ist eine weitere Einstellung zu sehen, sobald Sie Videos von einer analogen Quelle oder von einem MiniDV-Band übertragen. Diese Option ist nicht zu sehen, falls Sie Daten von einem Massenspeichergerät übertragen.
Abbildung 2.9: Einstellung der Szenenerkennung
Klicken Sie auf das Dreieckssymbol, um die Einstellungen der Szenenerkennung anzupassen.
67
Kapitel 2 – Importieren
Abbildung 2.10: Voreinstellung der Szenenerkennung
Beim Filmen wird die Kamera ständig an- und wieder abgeschaltet, um verschiedene Einstellungen aufzunehmen. Pinnacle Studio kann diese Szenen automatisch erkennen, sodass später ein Rohschnitt einfacher angefertigt werden kann. Hier können Sie nun einstellen, wie die Szenenerkennung während der Aufnahme erfolgen soll. Automatisch, nach Zeit/Datum Diese Option ist nur bei digitalen Camcordern möglich, die Aufnahmezeit und Datum mit auf das Band aufzeichnen. Diese Szenenerkennung ist die zuverlässigste, da Pinnacle Studio das Bild nicht analysieren muss. Automatisch, nach Bildinhalt Diese Option wird verwendet, wenn die Option Automatisch, nach Zeit/Datum nicht verfügbar ist. Pinnacle Studio analysiert den Inhalt des Bildes während der Aufnahme und entscheidet, wann eine neue Szene beginnt. Es kann zu Fehlern kommen, wenn z.B. die Linse beim Filmen ganz verdeckt oder ein Schwenk so schnell ausgeführt wurde, dass sich die Bildinformationen sehr rasch geändert haben. In solchen Situationen meint Pinnacle Studio aufgrund der starken Änderung der Bildinhalte, es sei eine neue Kameraeinstellung vorgenommen worden. Später ist das aber kein Problem, da die erkannten Szenen einfach hintereinandergelegt werden können. Automatisch, alle 20 Sekunden Wählen Sie diese Option, wenn alle erkannten Szenen gleich lang sein sollen, und geben Sie im Eingabefenster eine entsprechende Dauer in Sekunden an. Manuell, durch Drücken der Leertaste Mit dieser Option können Sie die Szenenerkennung komplett ausschalten und gegebenenfalls während der Aufnahme die Leertaste drücken, sobald eine neue Szene beginnen soll.
Überspielen von einer Festplatten- oder Chipkamera Videoaufnahmen von Kameras, die nicht mehr auf Band aufzeichnen, sondern auf einen internen Speicher wie Festplatte oder Memory Chip, können mit dem Studio Import direkt auf den PC kopiert werden. Im Prinzip könnten die Videoclips oder Fotos mit jeder anderen Software, auch dem Windows-Explorer, auf den PC kopiert und dann erst in Studio HD importiert werden. Einfacher geht dies aber direkt in Stu-
68
Überspielen von einer Festplatten- oder Chipkamera dio, denn dabei können die Daten in entsprechende Unterordner gespeichert werden. Mit der nachfolgend beschriebenen Funktion können auch Videos, Fotos und Musikclips von einer externen Festplatte oder einem am PC angeschlossenen Chipkartenleser auf den PC kopiert werden. Gehen Sie dazu wie folgt vor: 1. Verbinden Sie Ihre Videokamera, einen Fotoapparat, eine externe Festplatte oder jedes andere sogenannte Speichermedium mittels USB, FireWire oder eSata mit dem PC. Wenn Sie eine Videokamera am PC angeschlossen haben, müssen Sie diese vor dem Übertragen der Clips in den Abspielmodus versetzen. Ansonsten ist ein Kopieren der Daten nicht möglich. Konsultieren Sie allenfalls das Handbuch der Kamera, um genaue Hinweise zu erhalten. 2. Wählen Sie unter Importieren von die angeschlossene Kamera, Festplatte usw. aus. Je nach Typ und Art wird der Name der Kamera oder des Herstellers oder Andere Geräte angezeigt, unter dem Sie Ihre Clips importieren können.
Abbildung 2.11: Wählen Sie unter Importieren von die Kamera oder unter Andere Medien das angeschlossene Massenspeichergerät aus
Falls Sie von einem extern angeschlossenen Massenspeichergerät Medien importieren möchten, wählen Sie Andere Geräte. Wählen Sie dann das Verzeichnis zu den Mediendateien aus, indem Sie den Verzeichnisbaum einblenden.
Abbildung 2.12: Nach einem Klick auf Verzeichnisbaum werden die Verzeichnisse und Laufwerke eingeblendet
Klicken Sie auf den Verzeichnisbaum und wählen Sie das Verzeichnis aus, in dem die Daten gespeichert sind.
69
Achtung
Kapitel 2 – Importieren
Abbildung 2.13: Wählen Sie das Laufwerk oder Verzeichnis mit den Medienclips aus
Im Studio Import Tool werden alle Clips des zuvor gewählten Geräts oder Verzeichnisses durchsucht und aufgelistet. Dies kann in der Regel etwas Zeit in Anspruch nehmen.
Abbildung 2.14: Pinnacle Studio HD erstellt eine Liste der Mediendateien, die importiert werden können
Klicken Sie im unteren Bereich des Studio Import-Fensters auf Kompatible Dateien, um zu wählen, welche Daten des angeschlossenen Geräts angezeigt werden sollen.
Abbildung 2.15: Wählen Sie unter Kompatible Dateien aus, welche Daten angezeigt werden sollen
70
Überspielen von einer Festplatten- oder Chipkamera Standardmäßig werden alle kompatiblen, also alle Daten, die in Studio importiert werden können, angezeigt. 3. Wählen Sie unter Importieren nach den Ordner aus, in den die Daten kopiert werden sollen. 4. Wählen Sie unter Modus aus, ob die Daten nur kopiert oder auf dem angeschlossenen Gerät nachträglich gelöscht und ob bestehende Daten ignoriert werden sollen.
Abbildung 2.16: Wählen Sie, ob die Daten kopiert oder verschoben werden sollen, und ändern Sie gegebenenfalls den Dateinamen der zu kopierenden Daten
5. Unter Dateiname können Sie angeben, ob die Daten während des Kopierens umbenannt werden sollen. Weitere Infos entnehmen Sie dem Anfang dieses Kapitels. 6. Wählen Sie nun alle Clips aus, die Sie importieren möchten. Setzen Sie dazu ein Häkchen für jeden Clip oder wählen Sie Alles auswählen, wenn alles kopiert werden soll.
Abbildung 2.17: Wählen Sie aus, welche Clips kopiert werden sollen
7. Klicken Sie auf Import starten, um die Daten auf den PC zu übertragen.
71
Kapitel 2 – Importieren
Aufnahme von MiniDV-Kamera Digitale Kameras, die auf ein MiniDV-Band aufzeichnen, werden mittels eines FireWireKabels mit dem FireWire-Anschluss des PCs verbunden. Die Kameras können direkt aus Pinnacle Studio gesteuert werden. Das heißt, dass Sie die Kamera an den PC anschließen und danach nicht mehr berühren müssen, außer Sie wechseln das Band. Hinweis
Die FireWire-Schnittstelle wird auch als IEEE 1394, DV-Kabel oder iLink bezeichnet, wobei es sich hier um herstellerspezifische Angaben handelt. Der Standard ist im Prinzip immer der gleiche. Schließen Sie die MiniDV-Kamera über das FireWire-Kabel an den PC an. Sobald diese erkannt wurde, erscheint folgendes Fenster von Windows.
Abbildung 2.18: Automatische Wiedergabe von Windows, sobald eine Kamera über FireWire an den PC angeschlossen wurde
Sie können dieses Fenster schließen und direkt in Studio HD die Aufnahme wie folgt starten.
FireWire
Abbildung 2.19: Ein FireWire-Kabel mit kleinem und großem Stecker
72
Aufnahme von MiniDV-Kamera FireWire ist eine Schnittstelle für die Übertragung von Daten auf einen PC, sei dies von einer digitalen Videokamera oder einer externen Festplatte. Die Übertragungsrate von FireWire liegt bei 400 Mbps. Eine schnellere Datenübertragung kann mit FireWire 800 erreicht werden. Dabei liegt die Übertragungsrate bei 800 Mbps. Noch schnellere Übertragungen sind ebenfalls möglich, bedingen aber zusätzliche Hardware. Beim Überspielen von Videos über ein FireWire-Kabel werden verschiedene Informationen übertragen. Zum einen sind dies das Video und Audio, zum anderen der Timecode mit sogenannten Metainformationen, Aufnahmezeit und Einstellungen an der Kamera. Videobild
720 x 576 Pixel für DV-PAL 1024 x 576 Pixel für DV Widescreen 1280 x 720 Pixel für HDV 720 25p 1440 x 1080 Pixel für HDV 1080 50i
Originalton
(Audio) mit 16 Bit 48 kHz
Timecode
Zeitinformationen auf dem Band
Metainformationen
Metainformationen sind unter anderem die Aufnahmezeit der Videoaufnahmen.
Tabelle 2.1: Informationen, die mit dem FireWire-Kabel zum PC transferiert werden
Der Vorteil liegt klar auf der Hand: Sämtliche Daten laufen durch ein Kabel. FireWire-Geräte können sogar hintereinandergeschaltet werden, falls Sie nur einen Anschluss am PC haben. Externe Festplatten haben oft zwei FireWire-Anschlüsse, diese sind als Ein- und Ausgang nutzbar. Alle FireWire-Geräte können während des Betriebs an ein PC-System angeschlossen werden. Windows erkennt diese Geräte und meldet den Anschluss über ein Informationsfenster; es werden keine zusätzlichen Treiber benötigt. Um Daten über das FireWire-Kabel zu übertragen, gehen Sie wie folgt vor. 1. Klicken Sie auf den Button importieren oder wählen Sie das Menü Ansicht/Importieren, falls der Studio Import-Fenster noch nicht geöffnet ist. 2. Wählen Sie unter Importieren von die über FireWire angeschlossene Kamera aus.
Abbildung 2.20: Unter Importieren von wählen Sie die Kamera aus, von der die Videos übertragen werden sollen
3. Unter Importieren nach wählen Sie einen Ordner auf der Festplatte Ihres PCs, um die eingelesenen Videos darin zu speichern. Weitere Infos zu dieser Option finden Sie am Anfang dieses Kapitels.
73
Kapitel 2 – Importieren
Abbildung 2.21: Unter Importieren nach wählen Sie, wohin die Videos auf dem PC gespeichert werden sollen
4. Klicken Sie mit der Maus auf das kleine Ordnersymbol neben Video, um den Zielordner zu definieren.
Abbildung 2.22: Wählen Sie den Ordner aus, in dem die Videos gespeichert werden sollen
5. Wählen Sie dann den Zielordner aus oder erstellen Sie einen neuen Ordner mit Neuer Ordner. Klicken Sie danach auf OK. 6. Klicken Sie auf Unterordner wählen, wenn Sie möchten, dass beim Einlesen automatisch in dem zuvor gewählten Ordner Unterordner erstellt werden sollen.
Abbildung 2.23: Mit dieser Option werden im gewählten Ordner weitere Unterordner erstellt
74
Aufnahme von MiniDV-Kamera 7. Unter Modus wählen Sie aus, in welcher Qualität die Videos übertragen werden sollen und ob eine Szenenerkennung erfolgen soll.
Abbildung 2.24: Wählen Sie hier die Qualität der Übertragung aus
Aufnahmequalität Sie können bei der Aufnahme zwischen zwei Qualitätsstandards auswählen, DV- und MPEG-Qualität.
DV-Aufnahme Eine Aufnahme in DV-Qualität heißt, dass die Videodaten von einem digitalen Camcorder über das FireWire-Kabel auf den PC übertragen werden, und zwar ohne Qualitätsverlust. Dabei entstehen auf der Festplatte sehr große Datenmengen. Trotzdem sollten Sie Videos möglichst immer in voller Qualität aufnehmen und bearbeiten. Erst wenn der Film komplett fertig geschnitten ist, kann er komprimiert werden, z.B. für die Verwendung auf einer DVD. So können Sie die beste Qualität Ihres Films erreichen. Für eine Aufnahme in DV-Qualität benötigen Sie 13 GByte freien Speicherplatz pro Stunde Film. Pinnacle Studio zeigt Ihnen immer an, wie viel Minuten Sie auf die Festplatte übernehmen können.
MPEG-Aufnahme Mit dieser Option können Sie das aufgenommene Video vor dem Bearbeiten in MPEGQualität umwandeln lassen, allerdings sind MPEG-Daten komprimiert und entsprechen nicht der Qualität von Original-DV. Weitere Erläuterungen und Informationen zum MPEG-Dateiformat lesen Sie in Kapitel 15, Abschnitt „MPEG-Videoformat“. Sie sollten Videomaterial immer auf höchster Stufe bearbeiten – je besser die Ursprungsqualität ist, desto besser wird das Endprodukt auf DVD oder Band.
Der Timecode Sobald Sie den Camcorder starten, wird in der virtuellen Kamera ein Timecode angezeigt.
Abbildung 2.25: Der Timecode wird beim Abspielen des Bands angezeigt
75
Kapitel 2 – Importieren Info
Timecode Der Timecode dient dazu, jedes Bild auf einem Videoband eindeutig zu identifizieren. Mithilfe des Timecodes ist es möglich, eine Verbindung zwischen dem Videoschnittprogramm und der Videoaufnahme herzustellen. Der Timecode ist wie folgt aufgebaut: Stunden:Minuten:Sekunden:Bilder. In Europa verwenden wir das PAL-System mit 25 Bildern pro Sekunde. Die Zählung beginnt bei 00 und endet bei 24. Das ergibt 25 Bilder. Somit hat jedes Bild einer DVAufnahme eine eindeutige Nummer. Der Timecode wird auf einer speziellen Spur auf dem Videoband gespeichert. Egal an welcher Position sich das Band beim Einlegen in der Kamera befindet, die Kamera weiß sofort die Timecode-Position, es sei denn, das Band wurde an dieser Stelle noch nicht bespielt. Die Timecode-Informationen sind nur für digitale Aufzeichnungen von Bedeutung. Analoge Quellen wie VHS, S-VHS usw. verfügen nicht über einen Timecode. Leider sind sich viele Amateurfilmer nicht bewusst, wie wichtig der Timecode ist. Es kommt oft vor, dass der Timecode auf dem Band mehrere Male bei null beginnt. Das geschieht dann, wenn das Band in einen nicht bespielten Bereich gespult und die Aufnahme gestartet wird. Wenn ein neues Band in die Kamera eingelegt wird, sollten Sie allerdings darauf achten, dass das Band bis zum Schluss mit einem durchgehenden Timecode bespielt wird. Wenn Sie sich beim Dreh entscheiden, die aufgenommenen Szenen zu betrachten, müssen Sie danach wieder ans Ende des aufgenommenen Videos spulen. Spulen Sie dabei in den Bereich, in dem noch nichts aufgenommen wurde, beginnt der Timecode wieder bei null zu zählen, das nennt man einen Timecode-Sprung. Nach Möglichkeit sollten Sie solche Timecode-Sprünge vermeiden. Hierfür gibt es drei Vorgehensweisen.
Band vorcodieren Legen Sie ein neues Band in die Kamera und starten Sie die Kamera im Aufnahmemodus. Starten Sie die Aufnahme (z.B. mit aufgesetztem Linsendeckel). Lassen Sie das ganze Band von vorne bis hinten durchlaufen. So erhält das Band einen durchgehenden Timecode. Spulen Sie jetzt das ganze Band zurück und beginnen Sie mit dem eigentlichen Filmen. Vorteil: Sie können beim Filmen das Band beliebig spulen und erhalten nie einen Timecode-Sprung, da das Band bereits über einen Timecode verfügt. Nachteil: Das Band wurde schon einmal bespielt.
10-Sekunden-Regel Sie legen ein neues Band in die Kamera und beginnen mit dem Filmen. Bevor Sie eine Szene begutachten, starten Sie die Aufnahme erneut und lassen die Kamera für ca. 10 Sekunden laufen. Nun spulen Sie das Band zurück und sehen sich die entsprechende
76
Aufnahme von MiniDV-Kamera Szene an. Danach können Sie das Band an den Schluss spulen, allerdings sollten Sie den Spulvorgang stoppen, bevor Sie über die vorher aufgenommenen 10 Sekunden kommen. Wenn Sie nun weiterfilmen, wird die Kamera den Timecode sauber weiterführen. Vorteil: Das Band wird nur einmal beschrieben. Nachteil: Sie müssen daran denken, dass vor jedem Zurückspulen extra Material aufgenommen werden muss.
End Search Gewisse Kameras verfügen über eine sogenannte End-Search-Funktion, mit der genau an das Ende der zuvor aufgenommenen Szene gespult werden kann. Ob Ihre Kamera mit einer solchen Funktion ausgestattet ist, lesen Sie in der Kamerabeschreibung nach. Vorteil: Sie haben einen sauberen Anschluss und müssen nicht zusätzliches Video aufnehmen. Nachteil: Diese Funktion ist oft recht mühsam zu bedienen und zeitraubend.
Bandsteuerung Im unteren Bereich des Import-Fensters sehen Sie die Steuerelemente, um die angeschlossene Kamera zu steuern. Klicken Sie auf die entsprechenden Symbole, um das Band zu spulen.
Abbildung 2.26: Bandsteuerung
Ziehen Sie an der Shuttle-Funktion, um das Band zu spulen und gleichzeitig im Vorschaufenster das Video zu sehen.
Start- und Endzeit Es ist nicht unbedingt notwendig, ein Band in voller Länge auf den PC zu überspielen. Sie können mit Pinnacle Studio HD angeben, von welcher Stelle des Bandes Sie die Aufnahme beginnen und beenden möchten. Dabei spult Pinnacle Studio HD das Band an die gewählte Stelle, beginnt mit der Aufzeichnung und stoppt an einer definierten Endzeit. Spulen Sie dazu das Band an die gewünschte Position, an der die Aufnahme beginnen soll, und klicken Sie dann auf Start oder geben Sie einen Start-Timecode in die entsprechenden Felder ein.
77
Kapitel 2 – Importieren
Abbildung 2.27: Mit Start und Ende kann ein Start- und Endpunkt für die Aufnahme gewählt werden
Wiedergabe-Lautstärke Mit der Funktion Wiedergabe-Lautstärke können Sie angeben, wie laut das übertragene Video zu hören ist.
Abbildung 2.28: Wiedergabe-Lautstärke
Dabei handelt es sich nicht um die Lautstärke, in der das Video übertragen wird, sondern lediglich darum, wie laut dies an den PC-Lautsprechern zu hören ist.
Aufnahme Um nun die Aufnahme zu starten, klicken Sie auf Aufnahme starten. Die Kamera beginnt das Band abzuspielen und an den PC zu übertragen. Dieser speichert die Daten im gewählten Format auf der Festplatte ab. Während der Aufnahme werden im unteren Bereich die einzelnen erkannten Szenen angezeigt.
Abbildung 2.29: Szenenerkennung während der Aufnahme
Analoge Aufnahme Als analoge Aufnahme werden Aufnahmen von Videokassetten oder Abspielgeräten in folgenden Formaten bezeichnet: VHS, VHS-C, S-VHS, S-VHS-C und Hi8. Analog ist nicht etwa gleichzusetzen mit Zelluloidfilmmaterial wie z.B. einem Super-8-Film, obwohl das auch als analog bezeichnet wird. Zelluloidfilm kann mit Pinnacle Studio natürlich nicht direkt eingelesen werden, hierfür ist es notwendig, ihn zuerst einzuscannen.
78
Analoge Aufnahme Voraussetzung für eine analoge Aufnahme ist, dass Sie ein Abspielgerät der genannten Formate an den PC anschließen können. Das funktioniert mit einer speziellen Hardware, die dazu dient, analoges Videomaterial in digitales umzuwandeln. Ein PC versteht nur digital. So ist eine analoge Aufnahme nach dem Einlesen in den PC immer in digitaler Form vorhanden. Solche Analog-Digital-Wandler, auch AD-Wandler genannt, können in einem PC bereits fest eingebaut oder als externe Box an einem FireWire- oder USBAnschluss angeschlossen sein. Grundsätzlich ist eine Aufnahme mit einem beliebigen Wandler möglich, falls dieses Gerät Direct-Show-kompatibel ist. Pinnacle bietet diverse Hardwarelösungen in Kombination mit Pinnacle Studio an, um die Umwandlung in bestmöglicher Weise vorzunehmen. Weitere Informationen finden Sie auf der Pinnacle-Homepage http://www.pinnaclesys.com oder in Kapitel 1, Abschnitt „Die verschiedenen Programmversionen“. Die Abspielgeräte werden mit der Wandlerbox entweder mit einem VHS-Kabel (gelbem Cinchstecker) oder einem Super-VHS-Kabel (schwarzem S-Video-Stecker) und einem Stereokabel für das Audio (rot-weißem bzw. schwarz-weißem Cinchstecker) verbunden.
Abbildung 2.30: Cinchstecker, gelb, weiß und rot
Aufnahmegerät wählen 1. Öffnen Sie das Studio Import Tool, falls dieses noch nicht gestartet ist, indem Sie im Menü Ansicht/Importieren wählen. 2. Wählen Sie unter Importieren von das angeschlossene Gerät aus. Im Beispiel wurde ein Pinnacle 510-USB Analog-Digital-Konverter angeschlossen. Je nachdem, was Sie für eine Hardware verwenden, erscheint hier ein anderer Name. 3. Wählen Sie im Untermenü aus, über welche Schnittstelle das Videosignal mit der Konverterbox verbunden ist.
79
Kapitel 2 – Importieren
Abbildung 2.31: Wählen Sie aus, über welche Schnittstelle das Bildsignal verbunden ist
Video Composite ist der gelbe Cinchanschluss, auch als VHS-Signal bezeichnet. Video SVideo entspricht dem S-Video-Signal. Der rote und der weiße Cinchstecker müssen immer angeschlossen werden, wenn Audio übertragen werden soll.
Weitere Einstellungen Unter Weitere Einstellungen können das Video und Audio beim Übertragen angepasst werden.
Abbildung 2.32: Weitere Einstellungen der Analogaufnahme
In den weiteren Einstellungen können Sie mittels der vertikalen Schieberegler während der Aufnahme Farbkorrekturen an einem Video vornehmen.
Abbildung 2.33: Video- und Audioeinstellungen
Achtung
Seien Sie vorsichtig, wenn Sie während des Einlesens von Videomaterial die Farben korrigieren, weil sich diese Korrekturen auf das ganze Band und nicht auf einzelne Kameraeinstellungen beziehen werden. Sinnvoll ist es, diese Einstellungen zu verändern, wenn ein Videoband einen falschen Farbstich oder zu hell oder zu dunkel aufgenommen wurde. Ansonsten können die Farben später in Pinnacle Studio für jede einzelne Szene viel besser korrigiert werden. Wenn Sie versuchen, jede Szene während der Aufnahme zu korrigieren, führt das zu keiner stetigen Farbkorrektur.
80
Analoge Aufnahme Sie können die Lautstärke der Aufnahme anpassen, indem Sie den vertikalen Schieberegler nach oben oder unten korrigieren. Achten Sie dabei auf den Ausschlagpegel, damit dieser nie zu laut bzw. übersteuert wird. Der horizontale Schieber dient dazu, die Stereoinformationen bereits während des Aufnehmens zu korrigieren; wenn Sie das Gefühl haben, der linke bzw. rechte Kanal sei zu leise bzw. zu laut, korrigieren Sie das mithilfe des Reglers. Seien Sie auch mit den Audioeinstellungen vorsichtig, die Lautstärke und Stereoinformationen können im Nachhinein in Pinnacle Studio bequem für jede einzelne Szene korrigiert werden. Wenn Sie das Audio während der Aufnahme korrigieren, kann keine stetige Korrektur erzielt werden. TV-Standard Hierbei handelt es sich um die TV-Norm. Die verschiedenen Normen unterscheiden sich in Bildgröße, Anzahl der Bilder pro Sekunde und Farbinformationen und sind daher nicht untereinander kompatibel. Sie können zwar entsprechend umgerechnet werden, dies aber nur mit Qualitätseinbußen. In Europa verwenden wir die PAL- (D, A, CH) und die SECAM-Norm (F). Die NTSCNorm wird in den meisten amerikanischen Ländern verwendet. Seitenverhältnis Dies wird in Pinnacle Studio automatisch erkannt, sobald von einem Gerät aufgenommen wird. Die Seitenverhältnisse sind 4:3 für PAL-Standard und 16:9 für PAL Widescreen und High Definition Video (HDV). Wählen Sie im unteren Bereich der Einstellungen das Bildseitenverhältnis von entweder 4:3 oder 16:9. Beim Überspielen von analogem Video handelt es sich immer um Standard-Definition-Auflösung und nicht um High Definition.
Aufnahmequalität Die Qualität bei analogen Aufnahmen wird auf der rechten Seite unter Modus eingestellt.
Abbildung 2.34: Aufnahmevoreinstellungen
AVI-Aufnahme Eine Aufnahme im AVI-Format benötigt weitaus mehr Speicherplatz auf der Festplatte als eine Aufnahme im MPEG-Format, allerdings kann damit eine wesentlich höhere Qualität erzielt werden. In voller DV-Qualität wird das Video mit einer Datenrate wie
81
Achtung
Kapitel 2 – Importieren für digitales Video übertragen. Hierfür wird am meisten Speicher auf der Festplatte benötigt, und zwar 13 GByte pro Stunde. Auch wenn die Qualität des Videos dadurch nicht besser wird, wird es nicht zusätzlich komprimiert und verliert beim Einlesen nicht an Qualität. Falls Sie über genügend Festplattenspeicher verfügen, ist es sicher am sinnvollsten, die DV-Qualität zu wählen. Sobald Sie die Aufnahmequalität verringern, erhalten Sie zwar kleinere Dateien auf der Festplatte, aber damit ist immer ein Qualitätsverlust verbunden. Sie können die Videoqualität ändern, wenn Sie nicht so große Dateien auf der Festplatte speichern möchten. Sinnvollerweise wählen Sie dafür die MPEG-Kompression, die weiter unten beschrieben wird.
MPEG-Aufnahme Sie können bei der Aufnahme festlegen, ob die Daten im MPEG-Format aufgenommen werden sollen. Mit dieser Option können Sie das aufgenommene Video vor dem Bearbeiten in MPEGQualität umwandeln lassen, allerdings sind MPEG-Daten komprimiert und entsprechen nicht der vollen DV-Qualität. Weitere Erläuterungen und Informationen lesen Sie in Kapitel 15, Abschnitt „MPEG-Videoformat“. Sie sollten Videomaterial immer in höchster Qualität belassen, denn je besser die Ursprungsqualität ist, desto besser wird das Endprodukt auf DVD oder Band sein.
Aufnahme starten Starten Sie nun den angeschlossenen Videorekorder und klicken Sie dann auf Aufnahme starten, um die Aufzeichnung zu beginnen. Dabei speichert Studio das Video in digitaler Form im gewählten Format auf der Festplatte ab, und es ist danach im Album für die weitere Bearbeitung verfügbar.
Importieren ab DVD-Video oder Blu-ray Mit dem Studio Import ist es auch möglich, Videodaten von einer DVD-Video oder Bluray in den PC einzulesen. Allerdings handelt es sich hier um bereits erstellte DVDs und Blu-rays mit Videoinhalten, also Video-Discs. Die Discs müssen über eine standardisierte Ordnerstruktur bestehen, ansonsten sind diese nicht als Videodatenträger lesbar. Das bedeutet, bereits gebrannte Discs, zum Beispiel mit Pinnacle Studio HD, können zu einem späteren Zeitpunkt wieder in Pinnacle Studio HD weiterverarbeitet werden. Wenn Sie auf einer Disc Fotos, Musik und Videodateien gespeichert haben, die nicht dem DVD- oder Blu-ray-Videoformat entsprechen, dann müssen Sie diese Daten mittels der Funktion Andere Geräte auf die Festplatte übertragen. Mehr dazu im nächsten Abschnitt. Hinweis
Sie haben die Möglichkeit, bereits erstellte Discs in Pinnacle Studio weiter zu bearbeiten. Allerdings ist die Qualität dieser Filme bei einer DVD bei weitem nicht mehr zu vergleichen mit der ursprünglich gefilmten Qualität. Das Einlesen ab DVD eignet sich also nur, wenn die Daten anderweitig nicht mehr vorhanden sind. Beim Einlesen ab DVD-Video- oder Blu-ray-Discs werden die einzelnen Kapitel zur Auswahl angeboten. Sie können den ganzen Film oder Teile davon als MPEG-Datei auf
82
Importieren ab DVD-Video oder Blu-ray die Festplatte übertragen und dann weiterverarbeiten. Ein direktes Bearbeiten ab der Disc ist nicht möglich. Folgen Sie den Schritten, um die Videos einer Disc einzulesen: 1. Legen Sie eine DVD-Video oder ein Blu-ray-Video in das entsprechende Laufwerk ein und starten Sie den Studio Importer, falls noch nicht geöffnet. 2. Wählen Sie im Studio Importer DVD/Blu-Ray aus.
Abbildung 2.35: Videos können direkt ab Disc mit dem Studio Importer eingelesen werden.
3. Wählen Sie nun die Kapitel aus, die als MPEG-Datei auf den PC übertragen werden sollen. 4. Wählen Sie unter Importieren nach den Speicherort auf der Festplatte aus, wo die MPEG-Datei gespeichert werden soll. 5. Geben Sie unter Dateiname einen Namen ein, unter dem die Datei auf der Festplatte gespeichert werden soll. 6. Mit einem Klick auf Import starten werden die gewählten Kapitel als MPEG-Dateien auf den PC übertragen.
Abbildung 2.36: Die gewählten Kapitel werden von der Disc auf die Festplatte kopiert und als MPEG-Datei gespeichert
Abbildung 2.37: Danach wird automatisch eine Szenenerkennung gestartet, die die einzelnen Szenen im Album auftrennt
Die Videodaten sind nun im Album zu sehen und können ganz normal verarbeitet werden.
83
Kapitel 2 – Importieren
Stop Motion Mit der Stop Motion-Funktion haben Sie die einfache Möglichkeit, einen Trickfilm zu erstellen. Der große Vorteil dieser Funktion liegt darin, dass Sie Einzelbilder aufzeichnen können, die dann in Pinnacle Studio HD hintereinander zu einer kurzen Videosequenz zusammengesetzt werden. Damit Sie einen Trickfilm erstellen können, benötigen Sie Objekte, die als Schauspieler im Film agieren. Dies können Puppen, Knetfiguren usw. sein. Sie können die Figuren auf einem kleinen Filmset platzieren und durch Einzelbildaufnahmen bewegen lassen. Erstellen Sie ein Standbild, bewegen Sie dann die Figuren ein wenig und erstellen Sie ein weiteres Standbild usw. Gehen Sie dazu wie folgt vor: 1. Erstellen Sie das Filmset und platzieren Sie die Figuren. 2. Starten Sie die Import-Funktion von Pinnacle Studio HD im Menü Ansicht/Import, falls diese noch nicht gestartet wurde. 3. Wählen Sie unter Importieren von die Funktion Stop Motion. 4. Wählen Sie dann im Untermenü von Stop Motion die angeschlossene Kamera aus.
Abbildung 2.38: Stop Motion-Funktion
5. Klicken Sie nun auf Bild aufnehmen, um ein Standbild der gezeigten Szene zu speichern. Im unteren Bereich können Sie auswählen, ob der Film mit acht oder zwölf Bildern pro Sekunde erstellt wird. Wenn Sie acht Bilder pro Sekunde wählen, müssen Sie acht Bilder aufnehmen, um eine Sekunde zu erhalten.
84
Schnappschuss
Abbildung 2.39: Wählen Sie, wie viele Bilder pro Sekunde abgespielt werden
Ein großer Vorteil dieser Stop Motion-Funktion liegt darin, dass immer die letzten drei Bilder im Hintergrund transparent dargestellt werden. Dadurch haben Sie eine bessere Kontrolle, wenn Sie auf dem Filmset die Figuren neu platzieren. Die Figuren sollten immer um den gleichen Abstand versetzt werden, damit sie sich im Film in gleicher Geschwindigkeit bewegen.
Abbildung 2.40: Die letzten drei Bilder werden im Hintergrund transparent dargestellt
6. Klicken Sie auf Import starten, um die Bilder als Videoclip ins Album zu übernehmen.
Schnappschuss Mit der Schnappschuss-Funktion können Sie Standbilder von einem Videoband oder einer Webcam aufzeichnen und als Bilddatei auf dem PC speichern. Schließen Sie dazu einfach eine Webcam über einen USB-Anschluss an, eine MiniDV-Kamera über das FireWire-Kabel oder eine VHS/S-VHS Kassette über einen AD-Wandler, wie es unter „Analoge Aufnahme“ beschrieben wird.
85
Kapitel 2 – Importieren
Abbildung 2.41: Schnappschuss-Funktion
Gehen Sie dann wie folgt vor: 1. Wählen Sie unter Importieren von ein angeschlossenes Gerät aus. 2. Spulen Sie das Band an die gewünschte Stelle, von der Sie ein Standbild aufzeichnen möchten. 3. Klicken Sie dann auf Bild aufnehmen. 4. Klicken Sie auf Import starten, um die Grafiken in das Album zu übernehmen.
86
3 Studio HDGrundlagen Nachdem nun alle Videodateien auf der Festplatte gespeichert sind, können Sie mit dem eigentlichen Schneiden bzw. dem digitalen Bearbeiten des Videos beginnen. Alle Funktionen für das Bearbeiten des Films werden in diesem Kapitel beschrieben. Dazu gehören das Schneiden des Films, das Hinzufügen von Überblendeffekten, Musikund Audioanpassungen, Einfügen von Standbildern und das Setzen von Filtern.
Die Bearbeiten-Oberfläche Bevor Sie mit der Arbeit beginnen, sollten Sie die Programmoberfläche der Registerkarte Bearbeiten kennenlernen. Pinnacle Studio HD ist so aufgebaut, dass Sie mit wenigen Mausklicks zum Ziel kommen. Alle benötigten Elemente werden im Album angezeigt und können dann dem Film hinzugefügt werden. Die einzelnen Elemente werden im Folgenden kurz beschrieben.
Die Menüleiste Die Menüleiste ist beim Arbeiten mit Pinnacle Studio HD immer zu sehen, egal welchen Arbeitsschritt Sie gerade ausführen.
Abbildung 3.1: Die Menüleiste von Pinnacle Studio HD
In der Menüleiste sind fast alle Funktionen von Pinnacle Studio HD aufrufbar. Sie können aber auch über ein Symbol auf der Programmoberfläche, mit einem Tastenbefehl oder einem Rechtsklick mit der Maus aufgerufen werden. Oberhalb des Menüs in der Titelleiste von Pinnacle Studio HD wird der Titel des geöffneten Projekts angezeigt. Der Stern am Ende bedeutet, dass der aktuelle Stand im Projekt noch nicht gespeichert ist.
87
Kapitel 3 – Studio HD-Grundlagen
Das erweiterte Album
Abbildung 3.2: Das Album enthält sämtliche Videos, Titel, Bilder und Musikclips, die in Pinnacle Studio HD bearbeitet werden können
Das erweiterte Album auf der Registerkarte Bearbeiten ist das zentrale Element für alles, was im Film bearbeitet wird, und enthält sämtliche Elemente, die in den Film eingefügt werden können. Das Album ist in verschiedene Kapitel gegliedert und wechselt entsprechend die Oberfläche, sodass weitere Funktionen und Einstellungsmöglichkeiten sichtbar werden. Sämtliche Videoclips und Fotos, die in den Film eingefügt werden, müssen aus dem Album genommen werden. Nachfolgend eine kurze Übersicht über alle Albumeinträge.
Abbildung 3.3: Aufgenommene Videos
Hier erscheinen alle Videoclips und Szenen, die entweder von einem Camcorder auf den PC übertragen wurden oder von der Festplatte geladen sind. Es wird immer entweder eine Videodatei, unterteilt in verschiedene Szenen, angezeigt oder es können unterschiedliche Videodateien gleichzeitig in das Album geladen werden.
Abbildung 3.4: Übergangseffekte
Dieser Eintrag zeigt alle Übergangseffekte an, die im Film verwendet werden können. Übergangseffekte werden immer zwischen zwei Videoclips oder Fotos eingesetzt, um deren Übergang schöner oder verständlicher zu gestalten. Eine weiche Blende ist ein typischer Übergang, der zwei Clips ineinanderblendet.
Abbildung 3.5: Montagethemen
88
Die Bearbeiten-Oberfläche Mit den Montagethemen können Sie Ihre Filme noch interessanter gestalten, indem Sie mehrere Videoclips gleichzeitig darstellen, z.B. Bild-in-Bild oder wie ein Fotoalbum. Ebenso können Sie themenspezifische Effekte anwenden.
Abbildung 3.6: Titelvorlagen
Für den Film können Sie mit Titelvorlagen arbeiten und diese nach Ihren Wünschen und Vorstellungen abändern. Ein Titel dient dazu, Ihre Filme zu beschriften und mit geschriebenen Kommentaren zu ergänzen. Sie können einen Titel komplett selbst erstellen oder eine Vorlage verwenden.
Abbildung 3.7: Fotos und Standbilder
Wenn Sie mit Standbildern und Fotos arbeiten möchten, werden sie hier angezeigt. Diese Bilddateien müssen bereits auf Ihrem PC gespeichert sein, damit sie in das Album geladen werden können. Falls sich Ihre Bilddaten noch auf einem Memory Stick oder einer Kamera befinden, können diese direkt über das Album auf den PC kopiert werden. Mit Bildern können Sie z.B. eine Diashow erstellen.
Abbildung 3.8: Disc-Menü-Vorlagen für DVD und Blu-ray Discs
Für das Erstellen einer DVD oder Blu-ray kann ein Disc-Menü verwendet werden. Diese Menüs werden in diesem Register angezeigt und können nach dem Fertigstellen des Films verwendet werden.
Abbildung 3.9: Soundeffekte
Um Ihrem Film etwas mehr Schwung zu verleihen, können Sie Audio- und Soundeffekte einfügen. Pinnacle Studio HD bietet vordefinierte Geräusche, die Sie dem Film beliebig hinzufügen können.
Abbildung 3.10: Hintergrundmusik
89
Kapitel 3 – Studio HD-Grundlagen In diesem Register können Sie auf Musikdateien auf Ihrer Festplatte zugreifen und dem Film hinzufügen. Wählen Sie die Musik aus Ihrer Sammlung aus und benutzen Sie sie als Hintergrundmusik.
Das Storyboard
Abbildung 3.11: Die Storyboard-Ansicht dient zum Erstellen des Rohschnitts
Das Storyboard dient dazu, einen schnellen Rohschnitt zu erstellen. Der Film beginnt oben links und endet unten rechts. In der Storyboard-Ansicht werden Informationen wie die Länge des Films und weitere Spuren ausgeblendet, damit Sie schnell und einfach die benötigten Szenen anordnen können. So erhalten Sie einen Eindruck, wie der Film später aussehen wird. Sie können in dieser Ansicht mit dem Bearbeiten beginnen, sollten dann aber für die Feinarbeit in die Timeline-Ansicht wechseln. Falls Sie das Storyboard nach dem Starten von Pinnacle Studio HD nicht sehen, so klicken Sie auf folgendes Symbol oder wählen aus dem Menü Ansicht den Eintrag Storyboard.
Abbildung 3.12: Symbol für die Storyboard-Ansicht
Die Timeline Wechseln Sie in die Timeline, indem Sie folgendes Symbol anklicken oder aus dem Menü Ansicht den Eintrag Timeline wählen.
Abbildung 3.13: Symbol für die Timeline-Ansicht
In der Timeline-Ansicht wird der Rohschnitt verfeinert, und es sind weitere Video- und Audiospuren sichtbar. Eine weitere Videospur kann angezeigt werden, diese ist aber standardmäßig ausgeschaltet und kommt erst zum Zuge, wenn sie gebraucht wird. Beim Schneiden werden Sie die meiste Zeit die Timeline-Ansicht verwenden.
90
Die Bearbeiten-Oberfläche
Abbildung 3.14: Die Timeline-Ansicht für das präzise Bearbeiten
Listen-Ansicht Die Listen-Ansicht gibt eine Übersicht über den geschnittenen Film in Textform. Hier können Sie weitere Details zu den einzelnen Clips und Übergängen erhalten. Wechseln Sie in die Listen-Ansicht mit folgendem Icon oder wählen Sie aus dem Menü Ansicht den Eintrag Liste bearbeiten.
Abbildung 3.15: Symbol für die Listen-Ansicht
Abbildung 3.16: Die Listen-Ansicht für weitere Textdetails
Das Vorschaufenster Das Vorschaufenster haben Sie schon beim Aufnehmen kennengelernt. Das Vorschaufenster sieht aus wie ein TV-Monitor und zeigt Ihnen eine Vorschau des geschnittenen Films, der Effekte und DVD-Menüs. Während des Bearbeitens von Video dient dieses Vorschaufenster als Anzeige und Kontrolle der Clips und Effekte.
91
Kapitel 3 – Studio HD-Grundlagen
Abbildung 3.17: Die Videovorschau wird im Vorschaufenster angezeigt
Wenn Sie einen Breitbildmonitor besitzen, erscheint oberhalb des Vorschaufensters ein Schieberegler, mit dem das Vorschaufenster skaliert werden kann. Bei einer Bildschirmauflösung im Verhältnis von 4:3, z.B. 1024 x 768, erscheint dieser Schieberegler nicht.
Abbildung 3.18: Schieberegler, um das Vorschaufenster zu skalieren
Die Video-Toolbox
Abbildung 3.19: Die Video-Toolbox für weitere Funktionen und Effekte
Die Video-Toolbox gleicht dem Album und enthält eine Reihe von Funktionen. Mit einem Klick auf ihr Symbol wird sie geöffnet. Wenn die Video-Toolbox geöffnet ist, ist das Album nicht mehr sichtbar. Sie können sie jederzeit schließen, indem Sie auf das Kreuz oben rechts klicken. Öffnen Sie die Video-Toolbox mit folgendem Symbol, das sich unmittelbar über der Timeline befindet.
92
Die Bearbeiten-Oberfläche
Abbildung 3.20: Symbol für die Video-Toolbox
Abbildung 3.21: Trimm-Editor
Der Trimm-Editor hilft beim Kürzen und Verlängern von Clips auf der Timeline. Mit dieser Funktion können Sie bildgenau schneiden.
Abbildung 3.22: Montagethemen
Mit dieser Funktion können Sie bereits angewendete Montagethemen auf der Timeline anpassen.
Abbildung 3.23: Erstellen und Ändern von Titeln
Wenn Sie keine Titelvorlage verwenden wollen, dann erstellen Sie mit dieser Funktion einen neuen Titel.
Abbildung 3.24: Erstellen von DVD-Menüs
Hiermit können Sie DVD-Menüs ohne Vorlage erstellen. Lassen Sie Ihrer Kreativität freien Lauf!
Abbildung 3.25: Standbilder aus dem Film oder von einem digitalen Camcorder erstellen
Mit dieser Funktion können Sie ein Standbild aus dem Film erzeugen und in den Film integrieren oder auf die Festplatte speichern. Sie können damit aber auch ein Standbild von einem Stück Film direkt vom Camcorder erzeugen.
93
Kapitel 3 – Studio HD-Grundlagen
Abbildung 3.26: SmartMovie-Funktion
Über die SmartMovie-Funktion wird Ihr Film automatisch geschnitten und einem Musikstück taktgenau angepasst. So können Sie ein Musikvideo erstellen.
Abbildung 3.27: Bild-in-Bild- und Chroma-Key-Effekte
Erzeugen Sie mit einer zweiten Videospur einen Bild-in-Bild-Effekt. Sie können damit zwei Bilder gleichzeitig anzeigen und abspielen lassen. Die Chroma-Key-Funktion dient dazu, von einem Video eine Farbe zu entfernen und transparent darzustellen, wie das in Hollywood-Filmen zur Erzeugung von Spezialeffekten gemacht wird, z.B. im Film Superman, wenn dieser durch die Luft schwebt.
Abbildung 3.28: Videoeffekte-Sammlung
In der Videoeffekte-Sammlung befinden sich diverse Effekteditoren, mit denen Sie Ihren Film korrigieren und verändern können. Korrigieren Sie die Farben eines Clips oder verändern Sie den Film so, dass er z.B. aussieht, als wäre er auf Zelluloid aufgenommen worden.
Die Audio-Toolbox
Abbildung 3.29: Die Audio-Toolbox enthält Funktionen und Effekte für die Audiobearbeitung
94
Die Bearbeiten-Oberfläche Im Gegensatz zur Video-Toolbox wird die Audio-Toolbox für alle Audiobearbeitungen verwendet. Übrigens wird die Audio-Toolbox über dem Album angezeigt und kann mit einem Klick auf folgendes Symbol geöffnet werden.
Abbildung 3.30: Symbol zum Öffnen der Audio-Toolbox
Abbildung 3.31: Audio-Trimm-Editor
Dieser Editor dient dazu, einen Audioclip auf der Timeline zu verkürzen oder zu verlängern. Sie können ihn bildgenau schneiden und anpassen.
Abbildung 3.32: Lautstärkeregelung
Verändern Sie hiermit die Lautstärke der Audioclips. Mithilfe von Schiebereglern können die einzelnen Audiospuren abgemischt werden.
Abbildung 3.33: Nachvertonung mit einem Mikrofon
Wenn Sie ein Mikrofon an den PC angeschlossen haben, können Sie mit dieser Funktion dem Film einen Audiokommentar hinzufügen.
Abbildung 3.34: CD-Aufnahme
Mit dieser Funktion können Sie Musikstücke direkt von der CD in den Film integrieren. Sie wählen den gewünschten Titel aus und legen ihn auf die Timeline.
Abbildung 3.35: Automatisch Hintergrundmusik erzeugen
Die Scorefitter-Funktion enthält bereits viele Musikstücke in Pinnacle Studio HD, die Sie nach Belieben verwenden können. Das Besondere daran ist die Länge der Musikstücke. Ein Scorefitter-Musikstück hat im Prinzip kein definiertes Ende. Sie können diese Stücke also beliebig lang laufen lassen, und Pinnacle Studio HD komponiert immer einen Schluss hinzu.
95
Kapitel 3 – Studio HD-Grundlagen
Abbildung 3.36: Audioeffekte-Sammlung
Mit den Audioeffekten können Sie Ihre Audioclips nachträglich korrigieren und verändern. Zum Beispiel kann ein Windgeräusch reduziert werden.
Speichern Speichern Sie Ihre Projekte regelmäßig. Pinnacle Studio HD kann zwar sämtliche Arbeitsschritte automatisch speichern und nach einem Absturz das Projekt wieder öffnen, ohne dass Sie auch nur einen Schritt verloren haben. Dank der integrierten Instant-Save-Funktion müssen Sie das Projekt nicht ein einziges Mal selbst speichern. Trotzdem empfiehlt sich eine regelmäßige manuelle Speicherung. Definieren Sie zu Beginn Ihrer Arbeit, wo auf der Festplatte das Projekt gespeichert werden soll, damit Sie es später schnell finden. Weiteres dazu lesen Sie in Kapitel 1, Abschnitt „Das erste Projekt”.
Projekte und Projektdaten Ein Projekt in Pinnacle Studio HD besteht nicht nur aus einer Projektdatei, wie dies bis Version 9 von Pinnacle Studio HD funktionierte, sondern umfasst zwei Dateien, wobei die eine Datei eigentlich ein Unterordner ist, der aber nicht geöffnet werden kann. Zu einem Projekt gehören also immer eine Datei und dieser Ordner, die beide den gleichen Namen tragen. In diesem speziellen Ordner werden zusätzliche Informationen für das Projekt gespeichert, die von Ihnen nicht verändert werden können.
Abbildung 3.37: Pinnacle Studio HD-Projekt mit der Projektdatei und dem Projektordner
Rückgängig und Wiederherstellen Beim Arbeiten kann es vorkommen, dass Sie einen falschen Clip gelöscht oder irgendeinen anderen Fehler gemacht haben. Sie haben die Möglichkeit, einzelne Befehle rückgängig zu machen bzw. wiederherzustellen. Klicken Sie hierfür auf eines der beiden Symbole mit dem gebogenen Pfeil.
96
Videodateien aus einem Ordner importieren
Abbildung 3.38: Der linke gebogene Pfeil macht einen Befehl rückgängig, der rechte stellt einen rückgängig gemachten Befehl wieder her
Alternativ dazu können Sie einen Arbeitsschritt mit der Tastenkombination (Strg)+(Z) rückgängig machen bzw. mit (Strg)+(Y) einen zuvor rückgängig gemachten Arbeitsschritt wiederholen.
Videodateien aus einem Ordner importieren Das Importieren von bestehendem Videomaterial dient dazu, bereits digitalisierte Videodaten in ein Projekt zu integrieren. Hierbei kann es sich auch um Daten handeln, die von einer anderen Person stammen oder aus dem Internet heruntergeladen wurden. Grundsätzlich ist es also egal, woher die Videos kommen, Hauptsache, sie befinden sich auf einer Festplatte, die im oder am Computer angeschlossen ist, und die Daten sind mit Studio HD kompatibel.
Importieren von einer Festplatte Sie können in Pinnacle Studio HD die gängigsten Formate wie AVI, MPEG und WMV importieren. In diesem Kapitel zeige ich Ihnen, wie Sie Videos von der Festplatte Ihres PCs in Pinnacle Studio HD laden. Wie Sie Videos und Fotos von einer Kamera oder Disc importieren, lesen Sie in Kapitel 2 „Importieren“. Für das Importieren eines Videoclips gehen Sie wie folgt vor: 1. Klicken Sie im Album auf das Register Videos zeigen oder wählen Sie aus dem Menü Album den Eintrag Videoaufnahmen. 2. Klicken Sie im Album auf das Ordnersymbol.
Abbildung 3.39: Symbol zum Auswählen eines Verzeichnisses und Laden eines Films
3. Wählen Sie das Verzeichnis auf Ihrem PC, in dem sich die Videodatei befindet.
97
Achtung
Kapitel 3 – Studio HD-Grundlagen
Abbildung 3.40: Wählen Sie das Verzeichnis, aus dem Sie eine Videodatei importieren möchten
4. Klicken Sie auf die Videodatei, die ins Album geladen werden soll. Sie können wahlweise mit der Maus auf die Datei doppelklicken, um sie zu öffnen, oder nach dem Anklicken auf den Öffnen-Knopf klicken. Die gewählte Datei wird ins Album geladen, und alle erkannten Szenen werden angezeigt. Im oberen rechten Bereich des Albums wird angezeigt, wie viele Szenen darin enthalten sind. In Abbildung 3.41 werden die Szenen 1 bis 24 von insgesamt 32 Szenen dargestellt.
Abbildung 3.41: Das Video wird ins Album geladen und in einzelne Szenen aufgeteilt angezeigt
98
Videodateien aus einem Ordner importieren 5. Ziehen Sie auf der rechten Seite mit der Maus am Scrollbalken, um die Clips weiter unten darzustellen.
Abbildung 3.42: Mit dem Scrollbalken werden die weiteren Clips angezeigt
Falls im aktuellen Verzeichnis auf der Festplatte weitere Videodateien gespeichert sind, können Sie mit der Maus auf die Dropdown-Liste klicken, um weitere Dateien aus dem gleichen Verzeichnis ins Album zu laden.
Abbildung 3.43: Weitere Videoclips im gleichen Verzeichnis können einfach über die Dropdown-Liste geladen werden
Sobald die Datei in das Album geladen wurde, kann mit dem Bearbeiten begonnen werden. Wenn für die gewählte Datei noch keine Szenenerkennung gegeben ist, wird dieser Vorgang automatisch gestartet.
Abbildung 3.44: Die Szenenerkennung wird automatisch durchgeführt, falls sie für eine Videodatei noch nicht besteht
Befindet sich ein Stück Film im Album, ist die Rede von einer Szene. Befindet sich das gleiche Stück Film in der Storyboard-Ansicht, spricht man von einem Clip.
99
Hinweis
Kapitel 3 – Studio HD-Grundlagen
Albumansicht ändern Im Album von Pinnacle Studio HD können entweder eine Videodatei, unterteilt in verschiedene Szenen, oder mehrere Videodateien aus dem gleichen Festplattenordner angezeigt werden.
Abbildung 3.45: Buttons zur Einstellung der Albumansicht
Szenen Hierbei wird eine Videodatei, aufgetrennt in die einzelnen Szenen, im Album dargestellt. Eine solche Videodatei kann von einer Videokassette stammen, die den ganzen Film in einer Videodatei auf der Festplatte speichert, oder es handelt sich um einen fertig geschnittenen Film, den Sie noch einmal ins Album laden möchten. Falls Sie also Videos von einer MiniDV, VHS, Super-VHS oder Hi8-Kassette eingelesen haben oder einen fertig geschnittenen Film laden möchten, dann sollten Sie diese Funktion benutzen.
Dateien Hierbei werden unterschiedliche Videoclips bzw. Dateien im Album angezeigt. Diese Videoclips stammen von Kameras, die jedes Mal eine neue Datei speichern, sobald die Kamera ein- und wieder ausgeschaltet wird. Falls Sie Videoclips von einer Kamera haben, die auf eine Festplatte oder einen Speicherchip aufnimmt, sollten Sie diese Funktion benutzen. Diese Funktion können Sie ebenfalls wählen, wenn Sie alle Videoclips anzeigen möchten, die im gleichen Verzeichnis auf der Festplatte gespeichert sind.
Clipvorschau ändern Mit dem Brillensymbol im Album können Sie die Darstellungsart der einzelnen Szenen anpassen. Klicken Sie mit der Maus auf das Brillensymbol und wählen Sie eine Darstellungsart aus.
Abbildung 3.46: Die Szenenansicht wird durch einen Klick auf das Brillensymbol verändert
Falls Sie im Album nicht Szenen, sondern Dateien anzeigen lassen, dann sehen die Optionen für das Brillensymbol etwas anders aus, als in Abbildung 3.47 zu sehen ist.
100
Albumansicht ändern
Abbildung 3.47: Wählen Sie über das Brillensymbol die verschiedenen Anzeigemöglichkeiten aus
Szenen umbenennen Szenen im Album werden in der Kommentaransicht mit der Szenennummer und der Dauer angezeigt. Sie können diese Benennung ändern, indem Sie eine Szene mit der linken Maustaste zweimal hintereinander anklicken. Die Klicks sollten aber nicht wie ein Doppelklick ausgeführt werden, sonst wird die Szene im Vorschaufenster abgespielt und die Änderung der Szenenbezeichnung ist nicht möglich.
Abbildung 3.48: Die Szenen können individuell umbenannt werden
Szene suchen Eine Szene kann im Album gesucht werden, indem Sie im Menü Album auf Szenen nach Namen auswählen klicken. Geben Sie nun ins Eingabefeld Schlüsselwörter Wörter ein, nach denen Sie im Album suchen möchten. Mit der Option Und geben Sie an, ob mehrere Suchbegriffe zusammen im Namen vorkommen müssen. Mit der Option Oder geben Sie an, ob einer der eingegebenen Suchbegriffe im Namen vorkommen muss. Die Option Nicht sollte gewählt werden, wenn die eingegebenen Schlüsselwörter im Namen nicht vorkommen sollen. Dies ist dann hilfreich, wenn Sie z.B. alle Szenen markieren möchten, bei denen ein gewisses Wort nicht vorkommt. Wenn Sie auf OK klicken, wird das Album durchsucht, und alle Clips werden markiert, die der Suche entsprechen.
101
Kapitel 3 – Studio HD-Grundlagen
Abbildung 3.49: Im Album können die Szenen gesucht und markiert werden
Hinweis
Diese Suche durchsucht nicht Ihre Festplatte nach Videoclips, sondern nur das Album nach gewissen Begriffen. Wenn Sie also die einzelnen Szenen zuvor nicht umbenannt haben, dann macht diese Suche keinen Sinn.
Die Rohmontage Sobald Sie ein Video aufgenommen oder importiert haben, können Sie mit dem Aneinanderreihen der einzelnen Szenen beginnen, was als Rohmontage bezeichnet wird. Hierfür bietet Pinnacle Studio HD die sogenannte Storyboard-Ansicht an. Hinweis
Der Begriff Storyboard stammt aus der Spielfilmindustrie und dient der Vorbereitung eines Films. Vor dem Drehen des Films wird von jeder späteren Kameraeinstellung ein Bild, ähnlich einem Comic, gezeichnet. Das Storyboard dient der Filmcrew und den Schauspielern dazu, sich einen Überblick über die einzelnen Szenen zu verschaffen. Der Film kann so wie eine Art Diashow schon vor dem Dreh betrachtet werden. Die Storyboard-Funktion in Videoschnittprogrammen hat einen anderen Nutzen. Das aufgenommene Video wird beim Einlesen oder Kopieren auf den Computer einer Szenenerkennung unterzogen. Jede gefilmte Szene wird als Vorschauclip dargestellt und bietet einen Überblick über das gefilmte Videomaterial. So kann im Bearbeitungsprozess schnell ein Rohschnitt des Videomaterials erstellt werden.
Erstellen der Rohmontage Die Storyboard-Ansicht sieht aus wie der Negativstreifen in einem analogen Fotoapparat. In diesen Streifen können Sie nun die gefilmten Szenen ziehen. Gehen Sie dazu wie folgt vor:
102
Die Rohmontage 1. Wechseln Sie in die Storyboard-Ansicht, indem Sie im Menü Ansicht den Eintrag Storyboard wählen oder auf das Symbol für die Storyboard-Ansicht klicken.
Abbildung 3.50: Klicken Sie auf dieses Symbol, um in die Storyboard-Ansicht zu wechseln
2. Ziehen Sie nun alle Clips bzw. Szenen des Films per Drag&Drop in die StoryboardAnsicht.
Abbildung 3.51: Die einzelnen Clips werden einfach mit der Maus in die Storyboard-Ansicht gezogen und dort platziert
Reihenfolge der Szenen ändern Sie können die Reihenfolge der Szenen im Storyboard ganz einfach ändern, indem Sie die einzelnen Szenen mit der Maus an die gewünschte Position verschieben. 1. Klicken Sie mit der Maus auf den gewünschten Clip, um diesen zu markieren, und halten Sie die linke Maustaste gedrückt. 2. Ziehen Sie ihn an die neue Position in der Storyboard-Ansicht. Als Hilfe zum Einfügen wird Ihnen die grüne Linie als Markierung angezeigt.
103
Kapitel 3 – Studio HD-Grundlagen
Abbildung 3.52: Ziehen Sie den Clip mit der Maus an den neuen Platz
3. Lassen Sie die linke Maustaste an der Stelle im Storyboard los, an der der markierte Clip eingefügt werden soll. Im Beispiel wird der vierte Clip zwischen den zweiten und dritten geschoben.
Verwendete Szenen anzeigen Alle bereits verwendeten Szenen erhalten im Album ein Häkchen, damit Sie nicht den Überblick verlieren.
Abbildung 3.53: Die Häkchen zeigen an, dass diese Clips bereits im Storyboard verwendet wurden
Projektcontainer Mit dem Projektcontainer erhalten Sie ein wichtiges Werkzeug, um noch schneller verwendete Szenen, Bilder, Menüs usw. aufrufen und wiederverwenden zu können. Sie können den Projektcontainer anzeigen lassen, indem Sie auf das kleine Ordnersymbol oberhalb der Timeline klicken.
Abbildung 3.54: Der Projektcontainer wird durch Klicken auf das Ordnersymbol geöffnet und geschlossen
104
Die Rohmontage Im Projektcontainer sehen Sie verschiedene Register, mit denen Sie die einzelnen Clips anzeigen lassen können.
Abbildung 3.55: Inhalt des Projektcontainers mit den unterschiedlichen Registern
Sie können nun die verschiedenen Clips bzw. Filme direkt aus dem Projektcontainer in das Storyboard bzw. auf die Timeline ziehen, wenn Sie diese nochmals verwenden möchten.
Szenenanzeige verändern So verändern Sie die Größe der Storyboard-Ansicht: 1. Öffnen Sie die Projekteinstellungen, indem Sie im Menü Setup Projekt-Voreinstellungen wählen.
Abbildung 3.56: Wählen Sie die Option Große Storyboard-Miniaturen anzeigen, um die Ansicht zu vergrößern
2. Markieren Sie die Einstellung Große Storyboard-Miniaturen anzeigen, damit die Ansicht vergrößert wird. 3. Schließen Sie die Einstellungen mit einem Klick auf OK.
105
Kapitel 3 – Studio HD-Grundlagen
Abbildung 3.57: Die Miniaturen in der Storyboard-Ansicht werden jetzt größer dargestellt
Szenen mehrmals verwenden Es ist möglich, die gleiche Szene mehrmals in einem Film zu verwenden. Auf diese Weise können Sie eine Wiederholung im Film erzeugen. Dazu ziehen Sie einfach den Clip an die gewünschten Stellen im Storyboard.
Mehrere Szenen auf einmal in die Storyboard-Ansicht laden Sie haben die Möglichkeit, mehrere Szenen auf einmal in die Storyboard-Ansicht zu laden. Gehen Sie wie folgt vor:
Alle Szenen aus dem Album 1. Klicken Sie eine Szene im Album an und wählen Sie aus dem Menü Bearbeiten den Eintrag Alles auswählen oder verwenden Sie die Tasten (Strg)+(A). 2. Alle Szenen sind nun markiert und können zusammen in die Storyboard-Ansicht gezogen werden, indem Sie eine anklicken und bei gedrückter linker Maustaste in die Storyboard-Ansicht ziehen.
Hintereinanderliegende Szenen 1. Klicken Sie die erste Szene mit der Maus an. 2. Drücken Sie die Taste (ª) und halten Sie diese gedrückt. 3. Klicken Sie mit der Maus auf die letzte gewünschte Szene.
Abbildung 3.58: Im Beispiel wurden die ersten neun Szenen im Album markiert, zuerst der obere linke Clip und danach der dritte von links in der zweiten Reihe, dabei wurde (ª) gedrückt gehalten
106
Die Rohmontage 4. Klicken Sie eine der Szenen mit der Maus an und ziehen Sie alle in die StoryboardAnsicht.
Einzelne Szenen aus dem Album 1. Klicken Sie mit der Maus auf den ersten Clip, der in die Storyboard-Ansicht soll. 2. Halten Sie nun immer die Taste (Strg) gedrückt. 3. Klicken Sie jeden Clip an, den Sie in die Storyboard-Ansicht übernehmen möchten.
Abbildung 3.59: Im Beispiel sind fünf Clips ausgewählt, die im Film nicht hintereinanderliegen
4. Sobald Sie alle Clips gewählt haben, ziehen Sie diese in das Storyboard.
Löschen eines Clips Sie können die Clips im Storyboard jederzeit wieder löschen. Durch das Löschen verschwinden die Clips aus der Storyboard-Ansicht, was aber keinen Einfluss auf die Videodatei auf der Festplatte hat. Sie arbeiten stets mit Verweisen und somit nicht mit dem eigentlichen Videoclip. So bleibt also die Videodatei auch erhalten, wenn Sie einen Clip aus dem Storyboard löschen. 1. Klicken Sie den zu löschenden Clip mit der Maus an. 2. Klicken Sie auf das Papierkorbsymbol.
Abbildung 3.60: Mithilfe des Papierkorbsymbols wird ein Clip aus dem Storyboard gelöscht
Der Clip verschwindet von der Storyboard-Ansicht, bleibt allerdings im Album vorhanden. Das nennt man nondestruktives Bearbeiten. Das heißt, nicht die eigentliche Videodatei auf der Festplatte wurde gelöscht, sondern nur deren Referenz. Das Häkchen im Album verschwindet ebenfalls auf dem Clip, sobald dieser nicht mehr im Film verwendet wurde.
107
Kapitel 3 – Studio HD-Grundlagen Achtung
Es ist nicht möglich, einen Clip oder eine Szene aus dem Album zu löschen, um Daten von der Festplatte zu entfernen. Ein Videoclip muss immer als Ganzes auf der Festplatte im Windows-Explorer gelöscht werden. Denken Sie daran, dass eine Videodatei, die noch in einem Projekt benötigt wird, auf keinen Fall gelöscht werden darf, da sonst das Projekt nicht mehr vollständig bearbeitet werden kann. Alle Videodaten, die in einem Projekt verwendet werden, müssen als Originaldateien auf der Festplatte bleiben.
Die Größe des Storyboards Ist das ganze Storyboard voller Clips und werden weitere Zeilen benötigt, erscheint im rechten Bereich des Storyboards eine Bildlaufleiste, mit der nach unten bzw. nach oben gescrollt werden kann:
Abbildung 3.61: Die Bildlaufleiste zeigt an, dass noch weitere Zeilen vorhanden sind
Wie geht es weiter? Es ist im Prinzip möglich, bereits in der Storyboard-Ansicht mit dem Feinschnitt zu beginnen. Ich empfehle allerdings, in eine andere Ansicht zu wechseln, sobald der Rohschnitt fertiggestellt ist. In der Storyboard-Ansicht sehen Sie keinerlei Informationen über die Dauer eines Clips und dessen Audio. Lesen Sie dazu mehr im folgenden Kapitel.
108
4 Der Feinschnitt auf der Timeline In diesem Kapitel erfahren Sie, wie ein Film auf der sogenannten Timeline bearbeitet wird. Es sind nicht viele Funktionen, die Sie beherrschen müssen, aber diese paar vereinfachen das Arbeiten enorm. Die Timeline bietet Ihnen nähere Informationen und einen besseren Überblick als die Storyboard-Ansicht. So, wie die Storyboard-Ansicht für den Grobschnitt dient, findet die Timeline Anwendung für den Feinschnitt.
Der Aufbau der Timeline Die Timeline zeigt alle verwendeten Video- und Audiospuren sowie die Effekte, Übergänge, Titel usw. Lassen Sie sich die Timeline anzeigen, indem Sie aus dem Menü Ansicht den Eintrag Timeline wählen oder auf das Symbol Timeline-Ansicht klicken.
Abbildung 4.1: Über dieses Symbol wechseln Sie in die Timeline-Ansicht
Abbildung 4.2: Die Timeline-Ansicht zeigt alle nötigen Spuren und weitere Details zu den einzelnen Szenen an
Die Timeline ist ein wenig komplexer als die Storyboard-Ansicht. Es kann jederzeit zwischen diesen beiden Ansichten hin- und hergewechselt werden, ohne dass dies Einfluss auf den bereits geschnittenen Film hat. Im Folgenden ist der Aufbau der Timeline beschrieben.
109
Kapitel 4 – Der Feinschnitt auf der Timeline
Die Zeitleiste Zuoberst sehen Sie eine Art Lineal, die sogenannte Zeitleiste, welche die Filmlänge anzeigt.
Abbildung 4.3: Die Zeitleiste zeigt die Dauer eines geschnittenen Films an
Der Timeline-Scrubber In der Zeitleiste befindet sich der sogenannte Timeline-Scrubber. Dieser zeigt Ihnen stets die jeweilige Position auf der Timeline bzw. im Film an. Mit dem Scrubber ist es möglich, den Film schneller oder langsamer laufen zu lassen oder eine exakte Position zu finden.
Abbildung 4.4: Der Timeline-Scrubber zeigt immer die aktuelle Position im Film an
Zur Kontrolle sehen Sie im Vorschaufenster das Bild des Videos, auf dem der TimelineScrubber gerade positioniert ist.
Die Spuren Darunter folgt der eigentliche Arbeitsbereich: die Videospur und die dazugehörende Originalaudiospur. In Pinnacle Studio HD ist zusätzlich eine zweite Videospur enthalten, die aber standardmäßig erst angezeigt wird, wenn sie benötigt wird.
Abbildung 4.5: Die obersten beiden Spuren sind die Video- und die Originaltonspur
110
Scrubben
Die Titelspur
Abbildung 4.6: Die Titelspur enthält alle Titel für den Film, Stand-, Roll- und Lauftitel
Audiospuren Zuunterst werden zwei Audiospuren für Musikeffekte/Audiokommentare und Filmmusik dargestellt.
Abbildung 4.7: Auf den beiden Tonspuren können Sie Musik, Filmkommentare und Audioeffekte abmischen
Spuren sperren oder ausschalten Rechts von jeder Spur haben Sie die Möglichkeit, die Spuren aus- oder einzublenden oder zu sperren. Klicken Sie auf das Schlosssymbol, um die Spur zu sperren, oder auf das Lautsprechersymbol, um die Spur stumm zu schalten. Das Sperren einer Spur führt dazu, dass sämtliche Elemente darauf nicht mehr bearbeitet werden können. Diese Funktion kann eingesetzt werden, wenn Audio und Video voneinander getrennt oder eine bestimmte Spur nicht mehr verändert werden soll. Darauf werde ich später noch ausführlicher eingehen.
Abbildung 4.8: Spuren können mit dem Lautsprecher stumm geschaltet bzw. mit dem Schloss gesperrt werden
Scrubben Einer von vielen Vorteilen bei der Videobearbeitung am PC besteht darin, dass Sie während der Arbeit nicht ständig Bänder spulen müssen, da deren Inhalt ja auf dem PC gespeichert ist. Wenn Sie bei einem Videoband den Schluss sehen möchten, muss das Band gespult werden, und dies dauert seine Zeit. Mit dem Timeline-Scrubber haben Sie die Möglichkeit, auf der Timeline das Video zu spulen, und zwar viel genauer und bequemer als mit einem Videorekorder oder Bandgerät. Je langsamer Sie scrubben, umso genauer wird die Position im Film angezeigt. Das Scrubben dient im Grunde dem Auffinden einer bestimmten Szene im Film bzw. dem Erreichen einer bestimmten Position für weitere Bearbeitungen.
111
Kapitel 4 – Der Feinschnitt auf der Timeline Sie können den Film spulen bzw. scrubben, indem Sie mit der Maus auf den Kopf des Scrubbers klicken und die linke Maustaste gedrückt halten. Nun können Sie den Scrubber nach links oder rechts bewegen und sehen dabei im Vorschaufenster immer das Bild von der jeweiligen Position.
Abbildung 4.9: Scrubben Sie auf der Timeline, indem Sie mit der Maus den Scrubber nach rechts oder links bewegen
Je nachdem, wie groß die Ansicht ist, kann es sehr mühsam sein, eine gewisse Stelle im Film zu finden; das Scrubben kann auch viel zu ungenau sein, um ein einzelnes Bild in der Timeline zu lokalisieren. Sie können für Abhilfe sorgen, indem Sie die Timeline vergrößern bzw. verkleinern, wie es im Folgenden beschrieben wird.
Timeline-Ansicht vergrößern und verkleinern Um die Ansicht der Timeline zu vergrößern oder zu verkleinern, haben Sie zwei Möglichkeiten: 쐽 Durch Ziehen mit der Maus in der Zeitleiste 1. Klicken Sie mit der Maus irgendwo in die Zeitleiste, aber nicht auf den TimelineScrubber. 2. Sobald das Symbol mit der Uhr und den zwei Pfeilen erscheint, klicken Sie mit der Maus und ziehen nach links oder nach rechts. Ziehen nach links verkleinert die Timeline, Ziehen nach rechts vergrößert die Timeline.
Abbildung 4.10: Der Mauszeiger verwandelt sich in eine Uhr mit zwei Pfeilen, damit die Timeline-Ansicht vergrößert bzw. verkleinert werden kann
Wenn Sie beim Skalieren der Timeline-Ansicht mit der Maus am Bildschirmrand angekommen sind, müssen Sie die Maus neu positionieren und weiterziehen, damit weiterskaliert werden kann. 쐽 Durch Klicken auf die Symbole Lineal vergrößern oder Lineal verkleinern 3. Klicken Sie mit der Maus im unteren linken Bereich der Timeline auf das Plus für Lineal vergrößern bzw. auf das Minus für Lineal verkleinern, um die Timeline zu skalieren.
112
Clips auf die Timeline legen
Abbildung 4.11: Mit diesen beiden Symbolen wird die Timeline-Ansicht skaliert
Das Skalieren bzw. Vergrößern/Verkleinern ist nicht zu verwechseln mit der Zeitlupen/Zeitraffer-Funktion. Das Skalieren hat auf den Film keinen Einfluss, sondern dient nur der besseren Ansicht der Timeline. Beim Bearbeiten von Videos muss der Zoom ständig verändert werden. Je genauer geschnitten werden soll, umso größer muss gezoomt werden. Es gibt also keinen Standardzoom. Beachten Sie auch, dass die Skala der Zeitleiste ebenfalls gezoomt wird und der Film seine Länge behält. Wenn Sie den Zoom so groß wie möglich einstellen, sind die einzelnen Bilder des Films sichtbar. Das sehen Sie auch daran, dass sich der Timeline-Scrubber nur ruckartig verschieben lässt, und zwar Bild für Bild.
Vordefinierte Zoomwerte einstellen Sie haben die Möglichkeit, sich die Timeline in vordefinierten Werten anzeigen zu lassen. Damit ist gemeint, dass Sie einen bestimmten Wert für die Skala angeben können. Hierfür klicken Sie mit der rechten Maustaste in die Zeitleiste und wählen eine der vordefinierten Skalierungen.
Abbildung 4.12: Klicken Sie mit der rechten Maustaste auf die Zeitleiste, um diese Auswahlleiste zu erhalten
Clips auf die Timeline legen Wie Sie bereits gelesen haben, können einzelne Filmszenen aus dem Album direkt in die Storyboard-Ansicht geladen werden. Das ist ebenfalls in der Timeline-Ansicht möglich. Ziehen Sie die Clips aus dem Album direkt an die gewünschte Stelle auf der Timeline. Ein neuer Clip kann immer vor oder nach einem bestehenden Clip auf die Timeline platziert werden, es sei denn, Sie arbeiten mit zwei Videospuren.
113
Kapitel 4 – Der Feinschnitt auf der Timeline
Abbildung 4.13: Clips können Sie per Drag&Drop aus dem Album in die Timeline legen
Werden zwei Clips aus dem Album auf die Timeline gelegt, die im Album hintereinanderliegen, so wird dies auf der Timeline durch eine gestrichelte Linie angezeigt.
Abbildung 4.14: Zwei Clips, die nacheinander gefilmt wurden, werden auf der Timeline durch eine gestrichelte Linie angezeigt
Achten Sie auf die Darstellung der Clips auf der Timeline: Der Clip beginnt immer links vom kleinen Vorschaubild und endet je nach Zoom nicht am rechten Rand des Vorschaubildes, sondern dort, wo ein neuer Clip beginnt. Wenn also ein Clip etwas kürzer ist, als Platz für das Vorschaubild vorhanden ist, wird er nicht ganz dargestellt. Wenn Sie den Zoomfaktor allerdings verändern, können Sie das ganze Vorschaubild sichtbar machen.
Abbildung 4.15: Der linke Clip ist zu kurz, sodass das Vorschaubild nicht mehr ganz Platz hat. Der rechte Clip hat Platz, der Clip endet am rechten Rand
114
Die zweite Videospur
Vorschaubild verändern
Tipp
Sie haben die Möglichkeit, das Vorschaubild eines Clips in der Timeline zu verändern, wenn Ihnen das erste Bild des Clips nicht gefällt. Scrubben Sie an die Stelle, an der sich das neue Bild befindet, klicken Sie mit der rechten Maustaste auf den Clip und wählen Sie Miniatur einrichten. Der Clip erhält ein neues Bild.
Die zweite Videospur Die zweite Videospur wird dann sichtbar, wenn Sie einen Videoclip aus dem Album auf die Titelspur legen. Der Videoclip bleibt dann nicht auf der Titelspur, sondern es wird eine zweite Videospur eingefügt und angezeigt. Der Videoclip auf der unteren Spur überdeckt immer den auf der oberen Spur. Dies ist der Fall, wenn Sie entweder mit zwei Kameras gearbeitet haben oder einen sogenannten Insert-Schnitt erstellen möchten.
Abbildung 4.16: Die untere Spur verdeckt die obere Spur
Hinweis
Insert-Schnitt Der Insert-Schnitt wird gebraucht, wenn Sie über ein bestehendes Video einen anderen Clip legen möchten, sodass im Hintergrund der Originalton der ersten Spur weiterhin zu hören ist. Am einfachsten ist es, wenn die erste Spur so bleiben kann, wie sie ist. Am besten vorstellbar ist dies am Beispiel eines Interviews, bei dem der Interviewte von einer Sache erzählt, die gleichzeitig zu sehen sein soll, während der Ton weiter zu hören ist. Ähnlich wie der Insert-Schnitt funktionieren auch der L- und der J-Schnitt. Lesen Sie dazu mehr im Verlauf dieses Kapitels.
Ändern der Clipreihenfolge Sie können die Reihenfolge der einzelnen Clips auf der Timeline beliebig verändern. Klicken Sie den zu verschiebenden Clip an und ziehen Sie ihn per Drag&Drop an den gewünschten Ort auf der Timeline. Sie können Clips zwischen zwei Clips auf der Timeline bzw. an den Anfang oder das Ende der Timeline ziehen.
115
Kapitel 4 – Der Feinschnitt auf der Timeline
Abbildung 4.17: Ein Clip kann auf der Timeline nach vorne oder nach hinten verschoben werden
Der Schnitt Mit digitalem Schneiden von Videos ist die gesamte Bearbeitung eines Videos gemeint. Unter Schneiden wird im engeren Sinn das Zertrennen von Videoclips verstanden. Der Begriff Schneiden kommt daher, dass die Zelluloidfilmstreifen zerschnitten werden mussten, um Stücke aus dem Film zu entfernen oder die Reihenfolge zu verändern. Im Prinzip funktioniert die Videobearbeitung am PC ähnlich. In Pinnacle Studio HD wird meist nicht herausgeschnitten, sondern die Clips werden entsprechend angeordnet. Was nicht gebraucht wird, muss gar nicht erst auf die Timeline. Trotzdem ist es wichtig, dass die Clips zertrennt werden können. Wo im Film geschnitten wird, entscheiden Sie selbst. Für das Schneiden stehen die im Folgenden beschriebenen Möglichkeiten zur Verfügung.
Einen Clip auftrennen und den Anfang oder den Schluss löschen 1. Scrubben Sie in einem Clip an die Position, an der geschnitten werden soll. Um die genaue Position zu finden, ist es eventuell notwendig, die Timeline etwas größer zu zoomen. 2. Sobald Sie die Position gefunden haben, klicken Sie auf der Timeline auf das Rasierklingensymbol, um den Clip in zwei Teile zu trennen. Der Clip wird in zwei Teile geteilt. Entscheiden Sie nun, ob der linke oder rechte Teil entfernt werden soll. 3. Klicken Sie den zu löschenden Clipteil mit der Maus an und klicken Sie dann auf das Papierkorbsymbol. Alternativ zum Papierkorb können Sie auch (Entf) drücken.
Abbildung 4.18: Rasierklingensymbol für das Teilen eines Clips
116
Der Schnitt
Einem Clip ein Mittelstück entfernen Hierfür ist es notwendig, einen Clip in drei Teile zu teilen. 1. Scrubben Sie an die Position des ersten Schnitts und klicken Sie auf das Rasierklingensymbol. 2. Scrubben Sie an die zweite Position und schneiden Sie nochmals mit der Rasierklinge. 3. Klicken Sie mit der Maus auf das Mittelstück und löschen Sie es mit einem Klick auf das Papierkorbsymbol oder mit (Entf).
Abbildung 4.19: Im Beispiel wird der Clip in drei Teile geteilt und danach der mittlere Teil gelöscht
Bei beiden Varianten wird der hintere Teil des Films lückenlos nach vorne, also nach links, gezogen, damit keine Unterbrechung entsteht. Falls ein Schnitt nicht optimal gelungen ist, haben Sie die Möglichkeit, ihn jederzeit rückgängig zu machen oder im Nachhinein mit der Trimm-Funktion zu korrigieren. Beachten Sie, dass das Rasierklingensymbol nicht angewendet werden kann, wenn sich der Scrubber direkt auf einem Schnitt befindet, da an dieser Position ja bereits geschnitten wurde. Mit dem Rasierklingensymbol wird immer der aktuell markierte Clip geschnitten.
Audio-Scrubbing Mit der Audio-Srubber-Funktion kann während des Scrubbens das Audio hörbar gemacht werden. Dadurch lässt sich eine Stelle auf einer Audiospur besser finden. Um das Audio-Scrubbing einzuschalten, klicken Sie auf folgendes Symbol:
Abbildung 4.20: Symbol für das Einschalten der Audio-Scrubber-Funktion
117
Achtung
Kapitel 4 – Der Feinschnitt auf der Timeline
Schwarze Ränder entfernen Wenn im Vorschaufenster oben und unten oder links und rechts schwarze Ränder angezeigt werden, dann entspricht der Videoclip nicht genau dem Seitenverhältnis des Projekts. Sie können diese aber schnell und einfach entfernen, indem Sie den Videoclip ein wenig vergrößern. Allerdings wird dann entweder oben und unten oder links und rechts ein kleiner Teil abgeschnitten und die Videoqualität wird durch das digitale Zoomen des Clips ein wenig verringert. 1. Klicken Sie mit der rechten Maustaste auf den Clip. 2. Wählen Sie dann den Eintrag Bild auf Framegröße hochzoomen.
Abbildung 4.21: Wählen Sie Bild auf Framegröße hochzoomen, um schwarze Balken zu entfernen
Wenn Sie mehrere Clips gleichzeitig anpassen möchten, dann wählen Sie diese zuerst mit der Maus aus und führen die Funktion für alle gleichzeitig aus.
Schnitttechniken Im Film werden oft Originalton und Bild unabhängig voneinander verwendet. Denken Sie an ein Interview, in dem der Sprecher von einer Sache spricht, die im Bild gezeigt wird, oder wenn der Originalton früher zu hören ist als das dazugehörende Bild oder umgekehrt.
L-Schnitt Hier wird das Audio des ersten Clips über dessen Länge hinaus verlängert, sodass der erste Clip aussieht wie ein „L“, daher die Bezeichnung L-Schnitt. Das Audio des ersten Clips ist länger zu hören.
Abbildung 4.22: Der L-Schnitt verlängert das Audio über den ersten Clip hinaus
118
Schnitttechniken
J-Schnitt Im Gegensatz zum L-Schnitt ist hier das Audio des zweiten Clips etwas früher zu hören.
Abbildung 4.23: Der J-Schnitt verlängert das Audio des zweiten Clips
In Spielfilmen wird oft mit dem Ton eine neue Szene eingeleitet. Bevor Sie aber einen L- bzw. J-Schnitt vornehmen, müssen Sie sich darüber im Klaren sein, was bleiben und was sich ändern soll. Wenn also das Audio weiterlaufen soll und das Videobild an derselben Stelle durch etwas anderes ersetzt wird, muss die Audiospur gesperrt werden, bevor Sie den Clip auseinanderschneiden. Wenn das Videobild bleiben soll, muss analog dazu die Videospur gesperrt werden.
Ton bleibt 1. Sperren Sie zuerst die Hauptaudiospur (Originaltonspur), indem Sie auf das Schlosssymbol am rechten Rand der Originaltonspur klicken.
Abbildung 4.24: Sperren Sie die Audiospur mit einem Klick auf das Schlosssymbol
Eine gesperrte Audiospur wird grau schraffiert dargestellt. Jetzt können Clips auf dieser Spur erst wieder bearbeitet werden, nachdem die Sperrung aufgehoben wurde. Zum Entsperren klicken Sie nochmals auf das Schlosssymbol am Ende der Timeline-Spur. 2. Schneiden Sie nun einen Clip mit der Rasierklinge auseinander.
119
Kapitel 4 – Der Feinschnitt auf der Timeline
Abbildung 4.25: Das Bild wurde geschnitten, Audio bleibt, wie es ist
Wie Sie sehen, ist das Video zertrennt worden, während der Inhalt der Audiospur so geblieben ist, wie er war. 3. Löschen Sie nun den linken oder rechten Teil des Clips und heben Sie die Sperrung durch nochmaliges Anklicken des Schlosssymbols wieder auf.
Abbildung 4.26: Die entstandene Lücke kann mit einem anderen Clip aufgefüllt werden
Die soeben entstandene Lücke auf der Videospur wird im Vorschaufenster schwarz dargestellt und kann nun mit einem anderen Videoclip gefüllt werden.
Trimmen Das Trimmen dient dazu, einen bereits geschnittenen oder rohen Clip etwas präziser zu verkürzen bzw. einen geschnittenen oder getrimmten Clip wieder zu verlängern. Kaum jemals hat ein Clip auf der Timeline ohne Bearbeitung die richtige Länge oder soll in voller Länge dargestellt werden. Es ist empfehlenswert, beim Filmen immer etwas mehr aufzunehmen, als später im Film wirklich gebraucht wird, denn Sie können ja nicht schon im Voraus wissen, wie die Szene im fertigen Film wirkt und ob sie nicht länger dargestellt werden soll. Daher ist es ganz normal, dass von jedem Clip am Anfang und am Schluss etwas Videomaterial weggenommen wird. Das ist mit der Rasierklinge möglich. Pinnacle Studio HD ist ein nondestruktives Videobearbeitungsprogramm, das heißt, dass die eigentliche Videodatei auf der Festplatte beim Löschen eines Clips nicht verändert wird. Wenn Sie also einen Clip in der Hälfte teilen und einen dieser Teile löschen, können Sie den gelöschten Teil mit der Trimm-Funktion wiederherstellen, ohne dass Sie den Originalclip nochmals auf die Timeline legen müssen. Sie können aber auch auf das Schneiden mit der Rasierklinge verzichten, wenn Sie einen Clip einfach trimmen, statt ihn zu schneiden.
120
Trimmen Hierzu gibt es grundsätzlich zwei Varianten, die beide ihre Vor- und Nachteile haben. Die erste Variante empfehle ich Einsteigern, die zweite ist etwas schneller. Finden Sie selbst heraus, welche Variante Sie bevorzugen.
Trimmen mittels der Clipeigenschaft Sie können den Trimm-Modus wie folgt öffnen: 1. Doppelklicken Sie mit der Maus auf den zu bearbeitenden Clip oder selektieren Sie den Clip und wählen Sie aus dem Menü Toolbox den Eintrag Clipeigenschaften ändern.
Abbildung 4.27: In der Clipeigenschaft kann der Clip präzise geschnitten werden
Ein Fenster wird geöffnet, in dem der aktuelle Clip angezeigt wird. Im linken Fenster ist das erste Bild und im rechten Fenster das letzte Bild des Clips sichtbar. Sie haben nun die Möglichkeit, mithilfe der beiden Schieber den Anfang bzw. den Schluss des Clips zu trimmen oder bildgenau den Anfangs- und Endpunkt zu setzen. Beginnen wir mit dem groben Trimmen eines Clips: 2. Bewegen Sie den Mauszeiger auf den linken Schieber, klicken Sie mit der linken Maustaste und fahren Sie nach rechts. Beobachten Sie dabei die Timeline und sehen Sie, wie der Clip links verkürzt wird. Je weiter Sie nach rechts fahren, desto mehr wird vom Clip abgeschnitten.
Abbildung 4.28: Der Clip wird auf der Timeline verkürzt
121
Kapitel 4 – Der Feinschnitt auf der Timeline 3. Sobald Sie den Schieber loslassen, wird die Lücke auf der Timeline geschlossen. Analog dazu können Sie den Schluss des Clips trimmen. Genauer geht es, wenn Sie Bild für Bild trimmen, indem Sie den Pfeil nach oben oder unten anklicken und so den Schieber bewegen bzw. den Clip trimmen.
Abbildung 4.29: Klicken Sie auf die Pfeilsymbole, um den Clip Bild für Bild zu trimmen
Wenn Sie einen bereits getrimmten bzw. geschnittenen Clip im Trimm-Modus öffnen, dann befinden sich die Schieber nicht am Anfang und am Ende, sondern bereits an der getrimmten Position. Zur Übung können Sie einen Clip auf der Timeline in zwei Teile schneiden und diese danach im Trimm-Modus öffnen. Sie sehen, dass vom linken Stück der rechte Schieber (Schluss ist getrimmt) und vom rechten Stück der linke Schieber verändert ist (Anfang ist getrimmt). Das jeweils getrimmte Stück ist eben auch das geschnittene Stück. Sobald Sie bei beiden Clips die Schieber ganz nach außen zurücktrimmen, werden Sie den gleichen Clip zweimal auf der Timeline haben.
Trimmen auf der Timeline Sie können Clips auch direkt auf der Timeline trimmen, ohne in den Trimm-Modus zu wechseln. Sie können also direkt auf der Timeline die gewünschten Clips verkürzen bzw. wieder verlängern. 1. Klicken Sie auf den zu trimmenden Clip auf der Timeline. 2. Bewegen Sie die Maus an den Anfang oder den Schluss des Clips. 3. Der Mauszeiger ändert sich in ein Pfeilsymbol. Ziehen Sie nun den Anfang bzw. den Schluss des Clips nach links bzw. rechts, um den Clip zu trimmen.
Abbildung 4.30: Der Clip wird getrimmt
122
Markierungen Das Maussymbol ändert sich in einen kleinen blauen Pfeil, der am Schluss eines Clips nach links und am Anfang eines Clips nach rechts zeigt. Beachten Sie, dass Pinnacle Studio HD immer den selektierten, also dunkelgrau markierten Clip als den zu trimmenden behandelt. (Für unser Beispiel heißt das, dass der rechte Clip und nicht der linke getrimmt wird.) 4. Halten Sie nun die linke Maustaste gedrückt und fahren Sie nach rechts, um den Clip zu kürzen. Sie können nicht nach links fahren (verlängern), da ein Clip zuerst gekürzt werden muss und dieser Clip nicht länger ist. Die nachfolgenden Clips werden automatisch nachgezogen, damit keine Lücke auf der Timeline entsteht. Sie werden bemerken, dass bei einem nochmaligen Trimmen am Anfang dieses Clips der Mauszeiger zu einem Doppelpfeil wird, da der Clip ja nun um das Getrimmte wieder verlängert oder weiter verkürzt werden kann.
Abbildung 4.31: Wurde ein Clip bereits getrimmt, erscheint der Mauszeiger als Doppelpfeil
Wie viel getrimmt wird, hängt davon ab, wie weit Sie mit der Maus fahren. Um bildgenau zu trimmen, ist es also notwendig, vorher auf der Timeline zu zoomen und die Ansicht zu vergrößern. Zur Übung können Sie die Timeline-Ansicht ganz groß zoomen und mit der Maus einen Clip Bild für Bild trimmen. Im Prinzip könnten Sie komplett auf das Schneiden eines Clips mit der Rasierklinge verzichten, indem Sie die Clips trimmen. Falls ein Teil in der Mitte entfernt werden muss, können Sie einfach den Clip zweimal in die Timeline ziehen und jeweils den Anfang und den Schluss über die Mitte trimmen. Entscheiden Sie selbst, welche Variante Sie bevorzugen.
Markierungen Markierungen dienen dazu, Positionen im Film wiederzufinden bzw. andere Clips wie Fotos oder Musik an eine bestimmte Position zu setzen. Sie können Markierungen wie folgt auf einen Clip setzen: 1. Wählen Sie mit der linken Maustaste einen Clip auf der Timeline aus. 2. Positionieren Sie den Timeline-Scrubber an die gewünschte Position. 3. Klicken Sie auf Marker an Scrubberposition hinzufügen, um einen Marker zu setzen.
123
Kapitel 4 – Der Feinschnitt auf der Timeline
Abbildung 4.32: Klicken Sie auf Marker an Scrubberposition hinzufügen
Eine andere Möglichkeit besteht darin, die Taste (M) auf der Tastatur zu drücken, um direkt einen Marker zu setzen.
Zum nächsten Marker springen Wenn Sie mehrere Marker gesetzt haben, können Sie mit den Pfeilsymbolen zum vorigen bzw. nächsten Marker springen.
Abbildung 4.33: Zum nächsten Marker springen
Marker benennen Geben Sie in das kleine Eingabefeld neben der Markernummerierung einen beliebigen Text ein, damit Sie später die Position schneller finden können.
Abbildung 4.34: Marker benennen
124
Löschen eines Clips Sie können alle Marker anzeigen lassen, indem Sie die Dropdown-Liste aufklappen. Klicken Sie einfach auf einen Marker, und der Timeline-Scrubber springt an die gewünschte Position.
Abbildung 4.35: Zu Marker springen
Löschen von Markierungen Positionieren Sie den Timeline-Scrubber auf eine Markerposition und klicken Sie mit der linken Maustaste auf Marker an Scrubberposition löschen.
Abbildung 4.36: Klicken Sie auf Marker an Scrubberposition löschen
Löschen eines Clips Klicken Sie mit der Maus den zu löschenden Clip an und klicken Sie danach auf das Papierkorbsymbol oder drücken Sie (Entf).
Abbildung 4.37: Einen Clip über das Papierkorbsymbol löschen
125
Kapitel 4 – Der Feinschnitt auf der Timeline Wenn ein Clip mitten im Film gelöscht wird, entsteht im Prinzip eine Lücke. Damit das nicht passiert, schiebt Pinnacle Studio HD alles, was dahinter liegt, nach vorne, sodass die Synchronizität gewährleistet ist. Möchten Sie aber eine solche Lücke lassen, dann drücken Sie gleichzeitig (Entf) und (Strg) oder wählen im Menü Bearbeiten den Eintrag Löschen (Lücke lassen).
Abbildung 4.38: Nach dem Löschen bleibt eine Lücke
Mehrere Clips auf einmal löschen Um mehrere hintereinanderliegende Clips auf der Timeline zu löschen, klicken Sie in der Timeline auf einen leeren Bereich unterhalb eines zu löschenden Clips. Ziehen Sie dann mit der Maus ein Auswahlrechteck über die zu löschenden Clips.
Abbildung 4.39: Mit der Auswahlfunktion mehrere Clips auswählen
Die Clips werden selektiert. Sobald alle Clips selektiert sind, können Sie diese über das Papierkorbsymbol löschen.
Alles auf der Timeline löschen Wenn Sie die ganze Timeline leeren und kein neues Projekt erstellen möchten, wählen Sie aus dem Menü Bearbeiten die Funktion Alles auswählen bzw. drücken Sie (Strg)+(A). Mit einem Klick auf den Papierkorb wird alles gelöscht.
126
5 Übergangseffekte Übergänge nennt man alles, was sich von einem Clip zum nächsten abspielt. Einen Übergang zwischen zwei Clips ohne Effekt nennt man einen harten Übergang oder harten Schnitt. Wenn Sie also bereits einen Rohschnitt erstellt haben, befindet sich zwischen jedem der Clips auf der Timeline ein harter Übergang bzw. harter Schnitt. Dieser Übergang wird auch in den meisten Spiel- und Dokumentarfilmen bei ca. 98 % der Schnitte angewendet. Das fällt einem beim Betrachten eines Films nicht unbedingt auf. Achten Sie doch das nächste Mal, wenn Sie einen Film ansehen, darauf und analysieren Sie die Art der Übergänge. Nachfolgend lernen Sie, wie Sie Übergänge mit einem Effekt kombinieren können. Wechseln Sie auf der Registerkarte Bearbeiten ins Album und wählen Sie am linken Rand das Register Übergangseffekte anzeigen. Abbildung 5.1: Albumseite für die Übergangseffekte
Das Album öffnet die Übergangseffekte und listet Ihnen alle möglichen Übergänge in Pinnacle Studio HD auf.
Abbildung 5.2: Im Album sind die Effekte als Vorschau sichtbar
Das Album zeigt die Übergangseffekte an, die Sie über die Kategorie im linken oberen Bereich des Albums gewählt haben. Wollen Sie zu einer anderen Kategorie wechseln, öffnen Sie die Dropdown-Liste und wählen die gewünschte Übergangskategorie. Pinnacle stellt Ihnen bereits in der Grundinstallation eine große Anzahl von Übergangseffekten zur Verfügung.
127
Kapitel 5 – Übergangseffekte
Abbildung 5.3: Wählen Sie Effekte aus weiteren Kategorien aus
Wenn Sie zusätzliche Übergangseffekte, z.B. ein Hollywood FX-Paket oder eine BonusDVD, installiert haben, sehen Sie mehr Übergänge in Unterkapiteln angeordnet.
Abbildung 5.4: Die Übergangseffekte mit einem Schloss müssen zuerst freigeschaltet werden, was kostenpflichtig ist
Hinweis
Diese Übergänge müssen Sie kostenpflichtig übers Internet freischalten, damit das Wasserzeichen verschwindet, oder Sie können eines der Hollywood FX-Pakete als Datenträger im Fachhandel erwerben, um diese zu gebrauchen. Klicken Sie auf die Schaltfläche Jetzt aktivieren, um die Effekte online freizuschalten. Unter 2D-Übergänge sind die Standardeffekte gespeichert. Sie können aus den Untergruppen den gewünschten Effekt aussuchen und in Pinnacle Studio HD benutzen. Wenn Sie auf Mehr Übergangseffekte klicken, öffnet Pinnacle Studio HD eine Internetseite, auf der Sie weitere Effekte kaufen können.
128
Abbildung 5.5: Weitere Übergangseffekte können online bei Pinnacle gekauft werden
Sobald Sie einen Effekt mit der Maus anwählen, sehen Sie im Vorschaufenster, wie der Effekt aufgebaut ist, bzw. es wird Ihnen gleich eine Demo abgespielt, die den Ablauf des Übergangs zeigt. Dabei steht der Buchstabe A für den linken Clip und der Buchstabe B für den rechten Clip auf der Timeline, die Sie mit dem gewählten Übergangseffekt ineinander überblenden lassen möchten. Ein Übergangseffekt wird wie folgt angewendet: 1. Wechseln Sie im Album über die Register zu den Übergängen oder wählen Sie aus dem Menü Album den Eintrag Übergänge. 2. Wählen Sie eine Kategorie und aus dieser Kategorie einen Übergangseffekt. 3. Ziehen Sie den gewünschten Übergangseffekt per Drag&Drop aus dem Album in die Timeline zwischen die beiden Clips, die Sie überblenden wollen.
Abbildung 5.6: Der Effekt wird zwischen zwei Clips gesetzt und kann gleich überprüft werden
Dazu halten Sie den Blendeneffekt nur über den ersten oder den zweiten Clip und lassen dann die Maustaste wieder los. Der Übergang wird automatisch zwischen den beiden Clips positioniert. Sie sehen zwei grüne Hilfslinien, zwischen die der Effekt eingefügt wird. Gegebenenfalls müssen Sie die Timeline etwas näher heranzoomen, damit der Effekt besser zu sehen ist. Natürlich können Sie einen Übergangseffekt auch in der Storyboard-Ansicht einsetzen; dazu gehen Sie wie folgt vor. 1. Wechseln Sie in die Storyboard-Ansicht, indem Sie im Menü Ansicht den Eintrag Storyboard wählen. 2. Öffnen Sie im Album das Register für die Übergänge.
129
Kapitel 5 – Übergangseffekte 3. Ziehen Sie einen Effekt zwischen zwei Clips auf den grauen Balken.
Abbildung 5.7: Übergangseffekte können auch in der Storyboard-Ansicht eingefügt werden
Sie können so immer zwischen zwei Clips einen Übergang setzen. Das ist auch am Anfang und am Schluss des Films möglich.
Länge eines Übergangs verändern Die Länge bzw. die Dauer eines Übergangseffekts können Sie nur in der TimelineAnsicht anpassen, da die Länge des Übergangs in der Storyboard-Ansicht nicht sichtbar ist und auch nicht ohne Weiteres verändert werden kann. Die Länge des Effekts können Sie verändern, indem Sie den Effekt auf der Timeline mit der Maus trimmen. Klicken Sie ihn an und bewegen Sie die Maus an den Anfang bzw. an das Ende des Effekts, bis sich der Mauszeiger in einen blauen Doppelpfeil verwandelt.
Abbildung 5.8: Ein Übergangseffekt kann genau wie ein Clip verlängert bzw. verkürzt werden
Fahren Sie mit gedrückter Maustaste nach links oder rechts, um den Effekt zu verkürzen oder zu verlängern. Beachten Sie dabei, dass bei einem Übergangseffekt zwei Clips für die Dauer des Effekts miteinander verschmolzen werden. Das führt dazu, dass Pinnacle Studio HD den Film um diese Länge kürzen muss. Das wird verständlich, wenn Sie folgendes Beispiel nachvollziehen: 1. Legen Sie zwei Clips auf die Timeline und trimmen Sie sie zu einer Länge von je fünf Sekunden, sodass der Film eine Länge von 10 Sekunden hat. 2. Zoomen Sie die Timeline auf die Länge des ganzen Films, fügen Sie nun irgendeinen Übergangseffekt hinzu und beobachten Sie das Ende des Films. Der Film wird um ein kleines Stück verkürzt, und zwar genau um die halbe Länge des Effekts. Wenn Sie nun den Effekt verlängern, verkürzt sich der Film entsprechend.
130
Länge eines Übergangs verändern
Abbildung 5.9: Der Film wird im Ganzen kürzer, je länger ein Übergangseffekt ist
Sie können den Effekt nicht länger als den kürzeren der beiden Clips machen. Beim Verkürzen des Effekts wird der Film wieder verlängert. Ein Übergangseffekt braucht Zeit, da zwei Clips miteinander verschmolzen werden. Das ist kein Problem, achten Sie einfach beim Filmen darauf, dass Sie von jeder Einstellung genügend Material aufgenommen haben und dieses später beim Schneiden für die Übergänge gebraucht werden kann. Ein Übergangseffekt kann durch einen Doppelklick auch im Trimm-Editor verändert werden. Doppelklicken Sie auf den Effekt, um den Editor zu öffnen.
Abbildung 5.10: Nach einem Doppelklick auf einen Effekt kann dieser bearbeitet werden
In der oberen rechten Ecke des Trimm-Editors wird die Dauer des Übergangseffekts angezeigt. Durch Anklicken der jeweiligen Anzeigeposition und durch Erhöhen oder Verringern der gezeigten Werte können Sie die Länge des Effekts verändern. Übergänge können auch in der Storyboard-Ansicht mit dem Trimm-Editor verändert werden. Den Trimm-Editor können Sie schließen, indem Sie mit der Maus auf das Kreuz klicken.
Standardlänge eines Übergangs Wenn Sie einen Übergangseffekt auf der Timeline anwenden, hat dieser eine Standardlänge. Diese Standardlänge ist in den Optionen von Pinnacle Studio HD festgelegt worden. Sie haben allerdings die Möglichkeit, die Standarddauer für alle neu hinzugefügten Übergänge zu ändern. Die Änderungen beziehen sich allerdings nur auf die neu hinzugefügten Effekte und nicht auf diejenigen, die schon im Film angewendet wurden.
131
Hinweis
Kapitel 5 – Übergangseffekte Um die Standarddauer zu ändern, gehen Sie wie folgt vor: 1. Wählen Sie im Menü Setup/Projekt-Voreinstellungen. Es öffnet sich das Dialogfenster Pinnacle Studio Setup-Optionen.
Abbildung 5.11: Hier kann die Standarddauer eines Effekts verändert werden
2. Unter Standarddauer können Sie die Länge für alle Übergangseffekte verändern. Das erste Zahlenpaar sind Sekunden, das zweite sind Bilder. Eine Sekunde besteht aus 25 Bildern. Diese Veränderung betrifft nur Effekte, die nach der Einstellung neu auf die Timeline gelegt werden. 3. Geben Sie die gewünschte Dauer ein und schließen Sie das Fenster mit einem Klick auf OK.
Effekte sinnvoll einsetzen Hinweis
Übergangseffekte werden in der Filmsprache gezielt eingesetzt. Natürlich können Sie zwischen jeden Clip einen Effekt legen und somit ein recht buntes Resultat erhalten. Es hat sich allerdings gezeigt, dass weniger oft mehr ist. Oft lenken überflüssige Übergangseffekte vom Film ab und verwirren den Zuschauer. Der wohl am häufigsten eingesetzte Effekt ist der sogenannte Weiche Übergang oder die Weiche Blende. Diese Blende dient z.B. dazu, dem Zuschauer mitzuteilen, dass im Film ein Orts- oder Zeitwechsel erfolgt. Wenn Sie also im Film eine Geschichte erzählen und den Ort wechseln, dann ist es sicherlich eine gute Lösung, zwei Clips langsam ineinander überblenden zu lassen.
Abbildung 5.12: Die weiche Blende wird für Orts- und Zeitwechsel eingesetzt
132
Effekte sinnvoll einsetzen Sie können diesen Effekt mit dem Übergang Ein-/Ausblenden noch verstärken, der kurz in Schwarz blendet, statt die Clips ineinander zu überblenden. Dieser Effekt befindet sich direkt links neben dem Übergang Weiches Überblenden. Alle anderen Effekte wenden Sie am besten dort an, wo sie abgestimmt auf den Filminhalt sinnvoll sind. Eine allgemeingültige Regel gibt es nicht, außer dass Sie Ihr Publikum nicht mit zu vielen Effekten verwirren oder langweilen sollten. Übergänge können natürlich auch am Anfang und am Ende eines Films angewendet werden, um ihn ein- oder auszublenden. Ziehen Sie dazu den Effekt einfach an den Anfang oder den Schluss des Films.
Abbildung 5.13: Übergangseffekte können auch am Anfang und am Schluss angewendet werden
Übergänge und Titel Übergänge lassen sich auf allen Videospuren und der Titelspur anwenden. Hierfür gehen Sie wie folgt vor: 1. Setzen Sie einen Titel auf die Timeline. 2. Öffnen Sie im Album das Register für die Übergänge. 3. Ziehen Sie mit der Maus per Drag&Drop einen Effekt an den linken oder rechten Rand eines Titels.
Abbildung 5.14: Einen Übergang auf einen Titel anwenden
Die Länge des Übergangs kann durch Trimmen verändert werden.
133
Kapitel 5 – Übergangseffekte
Effekt ersetzen Falls ein bestehender Effekt auf der Timeline durch einen anderen mit derselben Länge ersetzt werden soll, ziehen Sie den neuen einfach mit der Maus auf den bestehenden. Der vorherige Effekt wird automatisch gelöscht und durch den neuen ersetzt. Die Dauer bleibt dabei unverändert.
Effekt auf mehrere Clips gleichzeitig anwenden Sie haben in Pinnacle Studio HD die Möglichkeit, einen Effekt auf mehrere aufeinanderfolgende Clips gleichzeitig anzuwenden. Dies ist dann sinnvoll, wenn jeder Videoclip mit demselben Übergangseffekt überblendet werden soll, z.B. bei einer Diashow. Gehen Sie dazu wie folgt vor: 1. Setzen Sie mehrere Clips auf die Timeline und legen Sie zwischen den ersten und zweiten Clip einen Übergangseffekt. 2. Markieren Sie mit der Maus den Übergangseffekt und alle Clips rechts davon, auf die der Übergangseffekt angewendet werden soll.
Abbildung 5.15: Selektieren Sie mehrere Clips durch Gedrückthalten der linken Maustaste und Aufziehen eines Auswahlvierecks
3. Klicken Sie mit der rechten Maustaste auf den Übergangseffekt und wählen Sie aus der Liste Übergangseffekt in ausgewählte Clips kopieren.
Abbildung 5.16: Ein Effekt kann auf mehrere Clips mit einem Befehl kopiert werden
Der Effekt wird auf alle selektierten Clips kopiert. So können Sie sich eine Menge Arbeit sparen, denn auf diese Weise brauchen Sie nicht jeden Übergang manuell zu setzen.
134
6 Montagethemen
Bei Montagethemen handelt es sich um Effekte bzw. Vorlagen, die Sie an jeder Stelle Ihres Films einfügen können. Die Effekte sind nicht vergleichbar mit Übergangseffekten, sondern dienen dazu, mehrere Videoclips Bild-in-Bild darzustellen oder Videos und Fotos dreidimensional zu animieren. Grundsätzlich funktionieren die Montagethemen immer nach dem gleichen Prinzip. Um ein Montagethema anzuwenden, gehen Sie wie folgt vor: 1. Wählen Sie im Album die Montagethemen mit einem Klick auf das folgende Symbol: Abbildung 6.1: Montagethemen in Pinnacle Studio HD
Die verschiedenen Vorlagen sind in Kategorien zusammengefasst, die Sie im Album auswählen können.
Abbildung 6.2: Wählen Sie eine gewünschte Kategorie
2. Wählen Sie nun eine Vorlage aus dem Album aus und legen Sie diese an einen beliebigen Ort zwischen zwei Clips auf der Timeline, an den Anfang oder den Schluss des Films. Im Beispiel wird aus der Kategorie MultiLayer Mix die Vorlage MultiLayer Mix – MultiPIP – Unteres Drittel gewählt. Nun haben Sie die Möglichkeit, in die sogenannten Zielfelder ein Video oder ein Foto zu legen. Die Zielfelder entsprechen den Nummerierungen der Vorlage. Im Beispiel werden vier Clips gleichzeitig dargestellt. Zielfeld 1 ist der Hintergrund,
135
Kapitel 6 – Montagethemen die Zielfelder 2 bis 4 sind die kleinen Bilder am unteren Rand des Videos. Bei diesem Montagethema werden später im Film alle vier Filme miteinander abgespielt.
Abbildung 6.3: In der Video-Toolbox sind die erweiterten Einstellungen für das gewählte Thema zu sehen
3. Ziehen Sie nun entweder Videoclips oder Fotos per Drag&Drop in die Zielfelder. Im Register Video sehen Sie das aktuell in das Album geladene Video. Mit dem Register Photos können Sie Standbilder von Ihrem PC in das Montagethema laden.
Abbildung 6.4: Ziehen Sie die Clips in die Zielfelder, um den Effekt anzuwenden
4. Mit dem Schieberegler Position können Sie die Position der drei kleinen Bilder nach oben oder unten verschieben. 5. Spielen Sie nun den Film auf der Timeline ab und Sie sehen im Vorschaufenster sofort das Resultat.
136
Videos oder Fotos
Abbildung 6.5: Sehen Sie das Resultat in der Vorschau
Auf einfachste Weise laufen vier Videos gleichzeitig ab. Andere Videoschnittprogramme würden für diesen Effekt mindestens vier Spuren belegen, und jedes der Videos müsste mit einem speziellen Effekt versehen werden. Der Aufwand ist sehr gering und das Resultat sehr effektvoll. 6. Um wieder zur Themenübersicht zu gelangen, klicken Sie mit der linken Maustaste auf das Kreuzsymbol.
Abbildung 6.6: Schließen der Ansicht
Falls Ihnen das Montagethema nicht gefällt und Sie lieber ein anderes haben möchten, können Sie dieses wie einen normalen Clip von der Timeline entfernen. Ebenfalls können Sie das Thema mittels der Trimm-Funktion verkürzen bzw. verlängern.
Videos oder Fotos Sie können für die Montagethemen entweder Videos oder Fotos verwenden. Im Album bzw. den Montagethemeneinstellungen wählen Sie einfach das entsprechende Register aus.
Abbildung 6.7: Wählen Sie aus, ob Sie das Thema mit Videos und/oder Fotos verwenden möchten
Erweiterte Einstellungen Bei manchen Themen haben Sie die Möglichkeit, weitere Einstellungen vorzunehmen. Diese variieren je nach Vorlage. Wählen Sie z.B. ein Thema aus der Kategorie Album, können Sie zusätzlich zu den Zielfeldern einen Text für die Beschriftung des Albums festlegen:
137
Tipp
Kapitel 6 – Montagethemen
Abbildung 6.8: Zusätzliche Einstellungen für das Thema Album
In der Vorschau sieht das dann wie folgt aus:
Abbildung 6.9: Der Text ist in der Animation zu sehen
Schriftart anpassen Die Schriftart kann durch Klicken auf das Aa-Symbol links neben dem Texteingabefeld verändert werden.
Abbildung 6.10: Die Schriftart des Textes im Montagethema anpassen
138
Erweiterte Einstellungen
Länge ändern Ein Montagethema auf der Timeline kann in der Abspieldauer geändert werden. Dazu trimmen Sie das Montagethema mit der Maus genau so, wie Sie Video- oder Audioclips trimmen.
Abbildung 6.11: Bewegen Sie die Maus an den Anfang oder an den Schluss und ziehen Sie dann das Montagethema, um die Länge zu verändern
Bewegen Sie die Maus an den Anfang bzw. an den Schluss eines Montagethemas, bis der blaue Pfeil bzw. Doppelpfeil zu sehen ist. Trimmen Sie nun das Montagethema, um die Länge zu verändern. Nicht jedes Montagethema lässt sich in der Länge verändern. Die einen können nur verkürzt, die anderen gar nicht verändert werden.
Clip Anzeigedauer anpassen Bei einigen Montagethemen wird am Anfang oder am Schluss ein Foto- oder Videoclip in Vollbild dargestellt. Zum Beispiel wenn Sie das erste Montagethema aus der Kategorie Album verwenden, wird ein Videoclip im Platzhalter Nummer 4 am Ende des Montagethemas als Video wiedergegeben. Also das letzte Foto des Albums beginnt, als Video abzuspielen. Die Abspieldauer am Schluss kann nun auf der Timeline individuell angepasst werden.
Abbildung 6.12: Ziehen Sie den Effekt am Anfang bzw. am Schluss eines Montagethemas mit der Maus, um die Anzeigedauer eines Clips zu verändern
139
Hinweis
Kapitel 6 – Montagethemen Sie sehen bei gewissen Montagethemen am Anfang und oder am Schluss eine gestrichelte Linie. Diese gibt an, wie lang eine Videosequenz vor oder nach dem Montagethema wiedergegeben werden soll. Sie können nun diesen Effekt mit der Maus verlängern oder verkürzen, um die Anzeigedauer zu verändern. Dabei verändert sich aber auch die Geschwindigkeit der Effekte des Montagethemas, weil die Länge des Montagethemas gleich bleibt. Falls Sie dies nicht möchten, verlängern Sie einfach das Montagethema auf der Timeline.
Video trimmen Wenn Sie eine Videosequenz in ein Montagethema integriert haben, können Sie diese in der Länge verändern. Dies funktioniert allerdings nur, wenn die Videosequenz länger dauert als die Dauer des Montagethemas.
Abbildung 6.13: Eine Videosequenz im Montagethema kann in der Länge getrimmt werden
Sie sehen unterhalb der Videosequenz im Montagethema-Editor eine orangefarbene Linie mit einem kleinen Dreieck. Wenn Sie nun die Maus auf die Linie setzen und mit der linken Maustaste nach rechts bzw. nach links ziehen, dann verändert sich der Beginn der Videosequenz im Montagethema.
Audio anpassen Wenn Sie Videoclips mit Audio in einem Montagethema verwendet haben, dann können Sie die Lautstärke auf der Timeline des Montagethemas anpassen. Das Montagethema wird dabei wie ein ganz normaler Clip auf der Timeline behandelt.
Abbildung 6.14: Setzen Sie Keyframes mit der Maus, um die Audiolautstärke zu verändern
Weitere Informationen über die Audiobearbeitung finden Sie in Kapitel 10 „Musikund Audiobearbeitung“.
140
Erweiterte Einstellungen Wenn Sie mehrere Videoclips in einem Montagethema verwenden, dann wird je nach Thema das Audio der unterschiedlichen Clips gemischt. Sie können aber manuell festlegen, welche Audioinformationen von welchem Clip zu hören sein sollen.
Abbildung 6.15: Klicken Sie auf das Lautsprechersymbol, um das Audio eines Clips ein- bzw. auszuschalten
Klicken Sie mit der linken Maustaste auf eines der Audiosymbole, um das Audio des gewählten Clips stumm zu schalten. Nicht jedes Montagethema verfügt über Audioausgabe. Wenn Sie zum Beispiel ein Montagethema wählen, das eher für Fotos geeignet ist, sind keine oder nur ein Lautsprechersymbol zu sehen.
141
7 Titel
Titel dienen dazu, einen Film mit Textkommentaren zu ergänzen. Ein Film beginnt sinnvollerweise immer mit einem Titel und gibt eventuell auch Auskunft über die Macher. Allerdings muss ein Titel nicht unbedingt am Anfang eines Films erscheinen, sondern kann an beliebiger Stelle stehen. Ein Titel kann über das Video gelegt werden, sodass rund um die Schrift der bewegte Film zu sehen ist. Ein Titel kann aber auch vor einem neutralen Hintergrund oder Standbild stehen, ohne dass ein Video im Hintergrund zu sehen ist. In Filmen wird oft am Schluss ein Rolltitel als Abspann verwendet, in dem alle Mitwirkenden am Film aufgeführt werden. Oftmals werden Titel auch verwendet, um ein Datum oder den Namen eines Ortes einzublenden. Lassen Sie Ihrer Kreativität freien Lauf. In Studio HD Version 15 gibt es grundsätzlich zwei Arten von Titeln. Die einen Titel sind statische Titel und werden als Standardtitel bezeichnet. Deren Text lässt sich zwar bewegen, z.B. in einem Lauf- oder Kriechtitel, die Buchstaben und Wörter können aber nicht einzeln animiert werden. Eine weitere Art von Titel in Pinnacle Studio HD Version 15 sind die Motion-Titel, die etwas anders erstellt oder verändert werden als die Standardtitel. Weitere Informationen zum Motion-Titeleditor entnehmen Sie Kapitel 8 „Motion-Titeleditor“.
Standardtitel von Vorlage verwenden Im ersten Teil dieses Kapitels werden die Standardtitel von Pinnacle Studio HD beschrieben. Wechseln Sie im Album auf der Registerkarte Bearbeiten ins Register Titel, wenn Sie einen Standardtitel aus einer Vorlage verwenden möchten. Diesen Titel können Sie nach Ihren Wünschen anpassen. Es stehen zwei Möglichkeiten zur Verfügung, einen Titel für ein Video zu erstellen. Für Einsteiger ist es empfehlenswert, einen Vorlagentitel zu verwenden und diesen anzupassen. Die zweite Möglichkeit besteht darin, einen Titel komplett neu zu erstellen, wie dies in Kapitel 3, Abschnitt „Video-Toolbox“, beschrieben ist. Klicken Sie nun im Album auf Titel, um diese anzuzeigen, oder wählen Sie aus dem Menü Album den Eintrag Titel. Abbildung 7.1: Mit diesem Symbol werden die Titel im Album angezeigt
143
Kapitel 7 – Titel Wählen Sie in der Dropdown-Liste die Standardtitel aus. Angezeigt werden einige Standardtitel, die Sie direkt übernehmen können. Am einfachsten ist es, eine dieser Vorlagen zu verwenden und individuell anzupassen.
Abbildung 7.2: Im Menü Titel unter Standardtitel finden Sie die einfachen, nicht animierten Titel
Ziehen Sie per Drag&Drop einen beliebigen Titel aus dem Album in die Titelspur auf der Timeline an die gewünschte Stelle im Film. Tipp
Ein Titel kann sowohl auf die Titelspur als auch auf die Videospur gelegt werden, wobei zwischen beiden ein Unterschied besteht. Auf der Titelspur: Der Titel wird über bzw. vor dem Videobild dargestellt. Im Hintergrund ist das Video zu sehen. Ein solcher Titel wird als Overlaytitel bezeichnet, weil er über das Videobild gelegt wird. Auf der Videospur: Der Titel ist allein, also ohne Video im Hintergrund, zu sehen. Der Titel wird auf die Videospur gelegt, wenn er einen neutralen Hintergrund oder ein Standbild als Hintergrund hat. Dieser Titel wird Vollbildtitel genannt.
Abbildung 7.3: Im Album werden die Vorlagentitel angezeigt
Im folgenden Beispiel wird ein Titel in die Titelspur eingefügt. Ziehen Sie einfach einen gewünschten Titel mit der Maus per Drag&Drop auf die Titelspur der Timeline.
144
Titel anpassen
Abbildung 7.4: Ein Titel wird auf die Titelspur gelegt, wenn das Video im Hintergrund zu sehen sein soll
Damit klar ist, was transparent dargestellt wird, zeigt Pinnacle Studio HD als Hintergrund des Titels ein Schachbrettmuster an. Der Titel sieht in unserem Beispiel im Vorschaufenster wie folgt aus:
Abbildung 7.5: Ein Titel wird vor dem Video dargestellt. Im Hintergrund ist das Video zu sehen
Sie können einen Titel wie einen Videoclip mit der Trimm-Funktion verlängern oder verkürzen. Der Titel kann im Nachhinein mit der Maus an eine andere Position geschoben werden.
Titel anpassen Die Standardtitel können entweder so verwendet werden, wie sie sind, oder, besser noch, Ihren Wünschen entsprechend angepasst werden. Doppelklicken Sie mit der Maus auf den Titel in der Timeline, um den Titeleditor zu öffnen.
145
Kapitel 7 – Titel
Abbildung 7.6: Der Titeleditor kann mit Doppelklick auf einen Titel in der Timeline geöffnet werden
Im mittleren Bereich des Titeleditors lässt sich der Text eingeben und verändern. Im rechten Bereich stehen verschiedene Layoutvorlagen zur Verfügung, die individuell angepasst und modifiziert werden können. Klicken Sie mit der Maus auf den Text des Titels. Dabei wird ein Textcursor gesetzt. Schreiben Sie jetzt den neuen Titeltext. Das Layout werden wir später anpassen.
Abbildung 7.7: Ersetzen Sie den bestehenden Text durch einen eigenen
Um das Layout zu verändern, müssen Sie den Text selektieren bzw. auswählen. Wählen Sie dazu aus dem Menü Bearbeiten die Funktion Alles auswählen oder drücken Sie (Strg)+(A). Sie haben die Möglichkeit, aus bestehenden Layoutvorlagen Schriftart, Farbe, Schatten usw. auszuwählen oder die Einstellungen manuell vorzunehmen.
Layout aus einer Vorlage Bewegen Sie die Maus auf eine der Vorlagen im rechten Bereich, ohne zu klicken. Ein neues Fenster mit weiteren acht Varianten wird geöffnet. Sobald Sie auf eine Variante klicken, passt sich der Titel diesem Layout an.
146
Titelschrift verändern
Abbildung 7.8: Wählen Sie aus den Vorlagen ein Layout aus
Verändert wird das Erscheinungsbild des Textes. Schriftart und Größe bleiben bestehen.
Titelschrift verändern Mit den nachfolgenden Symbolen können Sie die Schrift verändern. Die Symbole kennen Sie vielleicht schon von der Textverarbeitung her. B steht für Fett, I für Kursiv und U für Unterstrichen.
Abbildung 7.9: Verändern Sie die Schrift und die Anordnung des Textes
Mit dem Textblock können Sie den Text links- oder rechtsbündig oder mittig darstellen, ihn in der Höhe verkleinern oder vergrößern und den Zeilenumbruch ein- oder ausschalten. Der Zeilenumbruch sollte bei Rolltiteln ausgeschaltet werden.
147
Kapitel 7 – Titel Daneben können die Schriftart und -größe angepasst werden. Nur die Schriftarten, die auf Ihrem PC installiert sind, werden in der Dropdown-Liste angezeigt:
Abbildung 7.10: Alle installierten Schriftarten werden in der Liste angezeigt
Jeder geschriebene Text wird in einem Textrahmen dargestellt, der eine bestimmte Größe hat. Damit Ihr Titel das ganze Bild füllt, ist es notwendig, diesen Textrahmen anzupassen. Sie können den Textrahmen verändern, indem Sie ihn am Rand mit der Maus anklicken. Im Editor werden nun gelbe Punkte sichtbar, sogenannte Kontrollpunkte, mit deren Hilfe die Anpassung durchgeführt wird.
Abbildung 7.11: Ein Textrahmen kann mithilfe der gelben Punkte skaliert werden
Klicken Sie mit der Maus auf einen der Kontrollpunkte und ziehen Sie ihn bei gedrückter Maustaste in die gewünschte Richtung. Der Rahmen wird komplett neu skaliert. Falls der Textrahmen lediglich verschoben werden muss, können Sie den Rahmen mit dem Vierpfeilsymbol verschieben. Dieses Symbol erscheint, sobald Sie mit der Maus auf den Textrahmen fahren. Achtung
Beachten Sie die rot gestrichelten Linien am Rand des Titelfelds. Sie zeigen Ihnen den bildsicheren Bereich an. Das heißt, dass alles, was innerhalb dieser Linien geschrieben ist, auch tatsächlich auf jedem TV-Gerät angezeigt wird. Nicht alle TV-Geräte haben die gleiche angezeigte Bildfläche, und es kann vorkommen, dass bis zu 10 % des Bildes einfach abgeschnitten werden. Bei Videoprojektoren und Präsentationen auf einem PC wird der ganze Bildbereich angezeigt, ebenfalls bei Flachbildschirmen. Wenn Sie also innerhalb der roten Linien schreiben, sind Sie auf der sicheren Seite.
148
Titelschrift verändern
Abbildung 7.12: Ein Titel wird an dem obersten grünen Punkt gedreht
Der oberste grüne Punkt dient dazu, den Text im Bild zu drehen. Fahren Sie mit der Maus auf diesen Punkt, damit der Mauszeiger als Kreispfeilsymbol erscheint. Nun können Sie den Titel drehen, indem Sie mit der Maus klicken, die Maustaste gedrückt halten und den Text nach links oder rechts bewegen.
Layout manuell anpassen Sie haben die Möglichkeit, das Layout des Titels individuell anzupassen. Das heißt, Sie können Textfarbe, Umrandung und Schattierung selbst definieren. Gehen Sie dazu wie folgt vor: 1. Markieren Sie den Text mit einem Mausklick und wechseln Sie in das Register Benutzerdefiniert oben rechts im Titeleditor. 2. Wenn Sie zuvor ein Layout gewählt haben, das nicht verändert werden kann, sind alle Funktionen grau hinterlegt und nicht einstellbar. In diesem Fall wählen Sie ein anderes Layout aus dem Standardregister; das obere linke kann immer manuell angepasst werden.
Abbildung 7.13: Nicht alle Layouts können manuell verändert werden. In diesem Fall wählen Sie ein anderes Layout für Ihren Titel aus
3. Verändern Sie nun Oberfläche, Konturen und Schatten des Textes. Im unteren Bereich erscheint eine Vorschau des geänderten Textes.
149
Kapitel 7 – Titel
Oberfläche Hier können Sie die Oberflächenfarbe des Textes und den Weichzeichnungsgrad der Schrift anpassen.
Abbildung 7.14: Einstellung der Oberflächenfarbe eines Textes
Wählen Sie durch einen Klick die Art der Oberflächenfarbe: Oberflächenfarbe ändern, Oberflächenverlauf ändern oder Oberfläche ist transparent. Transparenz wird durch das Schachbrettmuster dargestellt. Wenn Sie transparent wählen, verschwindet allerdings der Text, was wenig sinnvoll ist. Deshalb müssen Sie der Schrift eine Umrandung hinzufügen. Lesen Sie hierzu mehr im folgenden Abschnitt.
Textfarbe ändern Um die Farbe zu verändern, gehen Sie wie folgt vor: 1. Markieren Sie den Text Ihres Titels, den Sie verändern möchten. 2. Klicken Sie auf das linke der drei Vierecke im Bereich Oberfläche. 3. Nun erscheint das Farbauswahlfenster. Wählen Sie im Farbfeld die gewünschte Farbe aus oder geben Sie die Werte unter Rot, Grün und Blau ein.
Abbildung 7.15: Über das Windows-Standardfenster Farbe wird die Farbe ausgewählt
4. Wenn Sie die Farbe für die Oberfläche übernehmen wollen, klicken Sie auf OK.
Farbverlauf hinzufügen Wenn Sie die Oberflächenfarbe der Schrift mit einem Farbverlauf versehen möchten, gehen Sie wie folgt vor: 1. Klicken Sie auf das mittlere der drei Vierecke im Bereich Oberfläche. 2. Nun wird nicht direkt die Farbauswahl angezeigt, sondern ein kleines Fenster mit vier Farbvierecken. Klicken Sie auf jedes dieser Vierecke, um den Farbverlauf zu definieren.
150
Titelschrift verändern
Abbildung 7.16: Klicken Sie auf jedes der vier Vierecke, um dessen Farbe im Farbverlauf zu definieren
Transparenz Wenn Sie das Viereck mit dem Schachbrettmuster rechts außen anklicken, wird die Textfarbe transparent dargestellt. Wenn noch keine Umrandung zugewiesen wurde, verschwindet die Schrift; sobald eine Umrandung zugewiesen wird, wird sie wieder sichtbar.
Verwischungsgrad Mit dem Schieberegler können Sie die Schrift verschwommen darstellen. Wenn Sie dies wünschen, wählen Sie hier einen Wert zwischen 0 für scharf und 30 für unscharf. Sinnvoll sind solche Veränderungen in der Kombination von Umrandung und Schattierung.
Konturen Auch hier haben Sie die Möglichkeit, zwischen drei Darstellungsformen zu wählen, sie beziehen sich jedoch auf die Konturen des Textes und nicht auf die Textfarbe. Sie weisen mit dem oberen der beiden Schieberegler eine Umrandung zu, die dadurch sichtbar wird. Wünschen Sie keine Konturen, dann wählen Sie das Schachbrettmuster, also transparent.
Abbildung 7.17: Mit dieser Funktion können Sie einem Text eine Umrandung zuweisen
Mit dem oberen Schieberegler wählen Sie die Dicke der Kontur mit Werten zwischen 0 und 10. Mit dem unteren wird der Verwischungsgrad der Kontur eingestellt.
Schatten Mit dieser Funktion können Sie dem Text einen Schatten zuweisen. Wiederum gelten die beschriebenen Einstellungsmöglichkeiten. Die Farbauswahl bezieht sich hier auf die Farbe des Schattens, der hinter den Text gesetzt wird.
Abbildung 7.18: Fügen Sie dem Text einen Schatten hinzu
Der erste Schieberegler verändert die Größe des Schattens mit Werten von 0 bis 30 und der zweite Schieber verändert den Verwischungsgrad.
151
Kapitel 7 – Titel Im Kreis können Sie angeben, wo hinter dem Text der Schatten zu liegen kommen soll. Klicken Sie mit der Maus einen Punkt an, um die Richtung zuzuweisen.
Favoriten Im Register Favoriten sehen Sie, welche Layouts Sie zuletzt gebraucht haben, und können so schnell auf den gleichen Stil zugreifen.
Abbildung 7.19: Im Register Favoriten werden die zuletzt verwendeten Layouts gespeichert
Mit dem Koffersymbol können Sie das aktuelle Layout in die Favoritenliste übernehmen, sodass Sie später immer wieder darauf zugreifen können, ohne sämtliche Einstellungen erneut vornehmen zu müssen. Wollen Sie ein Layout wieder löschen, verwenden Sie das Papierkorbsymbol.
Hintergrund eines Titels Wie Sie bereits wissen, kann ein Titel über das Video gelegt werden. Die Videosequenz wird hinter dem Titel sichtbar dargestellt. Sie können einem Titel aber auch einen festen Hintergrund zuweisen, sodass dieser nicht mehr transparent dargestellt wird. Ein Hintergrund ist bei einem Overlaytitel nicht wirklich sinnvoll, denn dann wird das Video im Hintergrund durch den Titelhintergrund verdeckt. Sinnvoller wäre es, den Titel auf die Videospur zu legen und mit einem festen Hintergrund zu versehen. Diese Variante wird für die bessere Übersicht auf der Timeline empfohlen. Sie können allerdings auch ein Standbild auf die Videospur legen und darüber einen Titel mit Transparenz setzen, dies würde zum selben Resultat führen. Wenn Sie sich für einen Hintergrund im Titel entscheiden, so wird dieser immer dieselbe Länge haben wie der Titel selbst. Dazu ein kurzes Beispiel für beide Varianten.
Abbildung 7.20: Dasselbe Resultat auf verschiedene Weise erreicht
152
Hintergrund eines Titels Links befinden sich ein Standbild auf der Videospur und ein Titel auf der Titelspur. Rechts sehen Sie einen Titel mit integriertem Hintergrundbild. Beide Varianten liefern genau das gleiche Bild, allerdings sehen Sie schnell, dass die linke Variante viel flexibler ist. Sie können den Titel ein- bzw. ausblenden, ohne dass sich das Hintergrundbild dabei verändert. Für das Verwenden eines Standbildes als Titelhintergrund wechseln Sie in das Hintergrund-Menü, indem Sie auf das entsprechende Symbol klicken.
Abbildung 7.21: Symbol für das Hinzufügen eines Hintergrundbildes
Es wird eine Liste von Beispielbildern angezeigt, die in Pinnacle Studio HD bereits enthalten sind.
Abbildung 7.22: Standbilder können als Hintergrund für Titel verwendet werden. Klicken Sie sie einfach in der Liste an
Entsprechend dem Layout der Schrift kann der Hintergrund einfarbig, mit einem Farbverlauf oder eben transparent dargestellt werden. Wenn transparent gewählt wird, sprechen wir nicht von einem Hintergrund, weil dann ja wieder das Video zu sehen ist. Zusätzlich können Sie für den Hintergrund ein Standbild aus den Vorlagen in Pinnacle Studio HD oder aus dem Fundus von Fotos oder Grafiken auf Ihrer Festplatte wählen. Wenn Sie eine Hintergrundvorlage wählen wollen, klicken Sie sie einfach in der Liste an. Sie wird sofort übernommen.
153
Kapitel 7 – Titel Achtung
Achten Sie beim Verwenden von Grafiken als Hintergrund auf deren Größenverhältnisse bzw. auf die Anzahl der Pixel. Je nachdem, mit welchem Videomaterial Sie arbeiten, hat das Videobild eine andere Anzahl von Pixeln und somit ein anderes Seitenverhältnis. Wenn Sie mit einer Videokamera im Verhältnis 4:3 gefilmt haben und sie dem PAL-Standard entspricht, sollte das Bild für den Hintergrund mindestens 720 x 576 Pixel aufweisen. Wenn das Bild größer ist, spielt das keine Rolle, da Pinnacle Studio HD das Bild entsprechend verkleinert anzeigt. Wichtig hierbei ist, dass das Bild das Seitenverhältnis von 4:3 hat, da sonst Ränder an den Seiten bzw. oben und unten zu sehen sind. Die Standardvorlagen in Pinnacle Studio HD liegen im Verhältnis 4:3 und 16:9 vor. Standardmäßig sind die 4:3-Vorlagen sichtbar. Sie können aber die 16:9-Vorlagen anzeigen lassen, was im Folgenden beschrieben wird. Um eigene Bilder als Hintergrund zu wählen, führen Sie folgende Schritte aus: 1. Klicken Sie mit der Maus auf das kleine Ordnersymbol, um auf die Dateiebene zu gelangen. Das Dialogfenster Öffnen wird angezeigt. 2. Wechseln Sie in das Verzeichnis, in dem sich Ihre Bilder befinden. 3. Klicken Sie eines der Bilder an und klicken Sie dann auf die Schaltfläche Öffnen. Es ist völlig egal, welches Bild Sie anklicken, da alle Bilder in die Vorschau übernommen werden. Wenn Sie 16:9-Vorlagen verwenden wollen, wechseln Sie in den entsprechenden Ordner auf der Festplatte. Dieser befindet sich eine Ordnerhierarchie über den Standardhintergründen.
Abbildung 7.23: Wurde Pinnacle Studio HD auf Laufwerk C: installiert, befinden sich hier die Standardvorlagen für Hintergründe
154
Foto als Logo einfügen
Foto als Logo einfügen Sie können zusätzlich zu einem Titel ein Foto oder Standbild einfügen. Das ist nicht zu verwechseln mit einem Hintergrundbild. Ein Foto kann wie ein Text im Titel positioniert werden. Diese Funktion können Sie einsetzen, wenn Sie ein Logo im Film verwenden möchten, das z.B. immer oben links im Bild zu sehen sein soll. Klicken Sie auf das Fotoapparatsymbol, um ein Bild in den Titel zu laden.
Abbildung 7.24: Symbol für das Verwenden von Standbildern in Titeln
1. Wählen Sie über das Ordnersymbol einen Ordner auf der Festplatte aus, in dem sich die Bilder befinden. 2. Doppelklicken Sie mit der Maus auf eines der Bilder oder wählen Sie Öffnen, um die Bilder in die Vorschau zu laden. 3. Ziehen Sie nun das gewünschte Bild per Drag&Drop in den Titel.
Abbildung 7.25: Ein Foto oder Standbild kann einfach per Drag&Drop in den Titel gezogen werden
Die Grafik kann nun mit der Maus beliebig positioniert und skaliert werden, indem Sie sie an einem der gelben Punkte ziehen. Sie können in einem Titel auch mehrere Fotos verwenden, ziehen Sie einfach die gewünschten Bilder in den Titel. Ein Logo über die Dauer des ganzen Films anzeigen zu lassen geht auch mithilfe der zweiten Videospur und der Bild-in-Bild-Funktion. Wenn Sie die zweite Videospur nicht für ein Logo verwenden möchten, ist es wiederum hilfreich, das Logo in einem Titel zu positionieren. Dazu folgender Tipp: Erstellen Sie einen leeren Titel mit transparentem Hintergrund. Positionieren Sie das Logo an der gewünschten Stelle und verlängern Sie den Titel auf der Timeline über die gewünschte Dauer. Wenn Sie an einer bestimmten Stelle zusätzlich einen Text im Titel stehen haben möchten, zerschneiden Sie den Titel mit der Rasierklinge am Anfang und am Schluss. Öffnen Sie nun diesen separierten Teil im Titeleditor und geben Sie einen Text ein. Belassen Sie aber das Logo im Bild, damit dieses immer angezeigt wird.
155
Tipp
Kapitel 7 – Titel
Erweiterte Funktionen Reihenfolge Vielleicht haben Sie bemerkt, dass der geschriebene Text durch das Foto verdeckt wurde. Unter Umständen möchten Sie die angezeigte Reihenfolge ändern, sodass das Foto hinter dem Text dargestellt wird. Verfahren Sie dazu wie folgt: 1. Klicken Sie das Element an, das in den Vordergrund bzw. in den Hintergrund kommen soll. 2. Wählen Sie aus dem Menü Titel die Funktion Ebene und danach wahlweise In den Vordergrund oder In den Hintergrund, um die Anzeige anzupassen. Die einzelnen Optionen bedeuten: 쐽 In den Vordergrund: Das gewählte Element wird als das am weitesten vorne liegende angezeigt. 쐽 In den Hintergrund: Das gewählte Element wird als das am weitesten hinten liegende angezeigt. 쐽 Eine Ebene nach vorne: Das gewählte Element wird eine Ebene nach vorne angezeigt. 쐽 Eine Ebene nach hinten: Das gewählte Element wird eine Ebene nach hinten angezeigt. Die beiden letzten Funktionen sind natürlich nur dann sinnvoll einzusetzen, wenn Sie mehr als zwei Elemente in den Titel eingefügt haben.
Weiteren Text einfügen Sie können in einen Titel mehr als nur ein Textelement platzieren. Um ein neues Textelement zu erzeugen, gehen Sie wie folgt vor: 1. Klicken Sie mit der Maus auf das T im unteren Bereich des Titeleditors.
Abbildung 7.26: Über das T-Symbol wird weiterer Text in den Titel eingefügt
2. Platzieren Sie die Maus im Titel an die Stelle, an der Sie einen neuen Text schreiben möchten, und klicken Sie einmal mit der linken Maustaste – ein neues Textfeld wird erzeugt. 3. Geben Sie den neuen Text ein.
Zeichnen Sie können im Titeleditor Kreise, Ellipsen und Vierecke zeichnen, indem Sie wahlweise auf das Kreis- oder das Vierecksymbol klicken. Ziehen Sie dann mit der Maus an eine beliebige Stelle im Titel, um das Element zu zeichnen.
156
Erweiterte Funktionen
Abbildung 7.27: Ergänzen Sie einen Titel mit Vierecken und Kreisen
Das Layout der Elemente kann auf die gleiche Weise wie Textelemente angepasst werden. Mit einem Balken können Sie z.B. einen Text hervorheben. Sie haben einen Text in einer ähnlichen Farbe wie der des Hintergrunds geschrieben und möchten ihn nun etwas deutlicher darstellen. Zeichnen Sie ein Viereck und platzieren Sie es hinter den Text. So etwas sieht man oft in Nachrichten oder TV-Shows, wenn der Name einer Person in den Vordergrund geblendet wird. Dies wird auch Bauchbinde genannt.
Abbildung 7.28: Mit einem farbigen Balken als Hintergrund Text hervorheben
Text oder Elemente verschieben Sie können bestehende Textelemente bzw. Bilder und Objekte im Titel verschieben, indem Sie auf das Verschieben, Skalieren und Drehen-Symbol klicken.
157
Tipp
Kapitel 7 – Titel 1. Klicken Sie mit der linken Maustaste auf das Verschieben, Skalieren und Drehen-Symbol.
Abbildung 7.29: Das Verschieben, Skalieren und Drehen-Symbol
2. Wählen Sie dann das Element aus, das verschoben werden soll. Handelt es sich um ein Textelement, muss es mit der Maus am Rand angefasst werden.
Abbildung 7.30: Halten Sie die linke Maustaste gedrückt und verschieben Sie so die Elemente im Titel
Buchstaben- und Zeilenabstand und Neigung Sie können einen Text noch weiter verändern und anpassen, um ihn lesbarer oder schöner darzustellen. Wählen Sie dazu mit der Maus das Textelement aus, das Sie verändern möchten, und klicken Sie auf folgendes Symbol:
Abbildung 7.31: Verändern Sie über dieses Symbol den Abstand von Buchstaben, Zeilen und deren Neigung
Das Textelement erhält fünf gelbe Kontrollpunkte, die folgende Möglichkeiten bieten: Die beiden Punkte am linken und rechten Rand dienen dazu, den Abstand zwischen den einzelnen Buchstaben anzupassen. Ziehen Sie den Punkt am linken Rand nach links, vergrößert sich der Abstand zwischen den Buchstaben, nach rechts verkleinert er sich. Die beiden Punkte oben und unten am Rand verändern den Zeilenabstand. Der fünfte gelbe Punkt oben rechts dient dazu, den Text schräg darzustellen. Klicken Sie den Punkt an, halten Sie die linke Maustaste gedrückt und ziehen Sie ihn nach rechts bzw. links.
Abbildung 7.32: Dieser Text wurde etwas schräg gestellt und der Abstand zwischen den Buchstaben vergrößert
Gruppieren und Verketten Sie können mehrere Elemente in einem Titel miteinander verketten, um sie dann zusammen zu verschieben. Das ist dann hilfreich, wenn Sie viele Elemente in einem Titel verwenden. Bei den zu verbindenden Elementen kann es sich um Texte und Grafiken handeln. Gehen Sie dazu wie folgt vor:
158
Erweiterte Funktionen 1. Markieren Sie die Elemente, die Sie miteinander verketten bzw. gruppieren möchten. Wenn Sie sämtliche Elemente miteinander verketten möchten, wählen Sie aus dem Menü Bearbeiten und dann Alles auswählen. Wenn Sie nur einzelne Elemente miteinander verketten möchten, klicken Sie das erste mit der Maus an und dann mit gedrückter (Strg)-Taste alle weiteren Elemente. Bei Textelementen muss der Rahmen und nicht der Text angeklickt werden. 2. Klicken Sie nun auf das Gruppieren-Symbol, um alle ausgewählten Elemente miteinander zu verbinden.
Abbildung 7.33: Dieses Symbol dient zum Verketten mehrerer Elemente
3. Klicken Sie nun mit der Maus eines der verketteten Elemente an und verschieben Sie es: Alle anderen Elemente werden mit verschoben. Um die Verkettung wieder aufzulösen, klicken Sie auf das Symbol Gruppierung aufheben; es befindet sich rechts neben dem Verkettungssymbol.
Ausrichten Sie können mehrere Elemente im Titel aneinander ausrichten, um eine schönere Darstellung zu erzielen. Wählen Sie alle Elemente bei gedrückter (Strg)-Taste der Reihe nach mit der Maus aus und klicken Sie auf das Ausrichten-Symbol.
Abbildung 7.34: Klicken Sie zum Ausrichten mehrerer Elemente auf das Symbol mit den zwei übereinanderliegenden Balken
Eine Liste mit allen Möglichkeiten wird angezeigt. Wählen Sie die gewünschte Ausrichtung und klicken Sie auf das jeweilige Symbol.
Positionieren Zusätzlich können die Elemente im Titel positioniert werden. Das ist nützlich, wenn man die Mitte der Bildfläche herausfinden will. Wählen Sie mit der Maus das zu positionierende Element aus und klicken Sie danach auf das Justieren-Symbol am unteren Rand des Titeleditors.
159
Kapitel 7 – Titel
Abbildung 7.35: Über das Justieren-Symbol können Elemente in den Titel genau platziert werden
Fahren Sie mit der Maus auf die gewünschte Position in der eingeblendeten Tabelle, um das Element zu positionieren. Wenn der Text im Titel mittig dargestellt werden soll, klicken Sie mit der Maus in die Mitte der eingeblendeten Tabelle.
Kopieren, Einfügen und Löschen Sie können Elemente kopieren, um in einem Titel immer wieder den gleichen Text und das gleiche Layout zu verwenden. Dazu dienen folgende Symbole:
Abbildung 7.36: Diese Symbole werden für das Ausschneiden, Kopieren, Einfügen und Löschen verwendet
Das Scherensymbol schneidet ein markiertes Element aus. Es kann danach wieder mit dem Einfügen-Symbol eingefügt und an eine andere Stelle im Titel positioniert werden. Das Kopieren-Symbol kopiert ein Element, sodass es ein weiteres Mal im Titel verwendet werden kann. Fügen Sie es mit dem Einfügen-Symbol wieder in den Titel ein. Das Papierkorbsymbol löscht alle ausgewählten Elemente und entfernt sie aus dem Titel. Sie können ein Element auch selektieren und mit (Entf) löschen. Alle diese Befehle können Sie auch über das Menü Bearbeiten wählen.
Lauf- und Rolltitel Sicher kennen Sie aus Spielfilmen und TV-Shows die bewegten Titel. Sie haben mehrere Möglichkeiten, einen Titel im Film zu bewegen. Die beliebtesten Varianten sind bereits im Titeleditor eingebunden. Der Abspann, auch Rolltitel genannt, lässt den Text von unten nach oben laufen und der Kriech- oder auch Lauftitel von rechts nach links oder umgekehrt. Standardmäßig ist der Standtitel ausgewählt.
Abbildung 7.37: Stellen Sie mit diesen Schaltflächen die Titelart ein: Standtitel, Rolltitel und Kriechtitel
160
Fertige Titel speichern oder öffnen Achten Sie beim Verwenden des Rolleffekts darauf, dass Sie nach dem Text mit (¢) genügend Leerzeilen einfügen, da der Titel sonst nicht sauber aus dem Bild rollt. Der Text verschwindet sonst mitten im Bild, wenn er nach oben rollt.
Abbildung 7.38: Fügen Sie nach einem Rolltitel immer Leerzeilen ein, damit dieser sauber aus dem Bild rollt
Fertige Titel speichern oder öffnen Wenn Sie mit der Titelgestaltung fertig sind, reicht ein Klick auf OK aus, um den Titeleditor zu beenden und den Titel in den Film zu übernehmen. Wenn Sie einen Titel allerdings außerhalb des Projekts speichern möchten, um ihn später in ein anderes Projekt zu importieren, sollten Sie den Titel wie folgt auf der Festplatte speichern: 1. Wählen Sie im Titeleditor aus dem Menü Datei/Titel Speichern als. 2. Wählen Sie auf der Festplatte den gewünschten Speicherort für den Titel aus. Auf der Festplatte wird eine sogenannte Title-Deko-Datei mit der Endung *.dtl gespeichert. 3. Einen bestehenden Titel öffnen Sie, indem Sie im Titeleditor Datei und Titel öffnen wählen und den Titel auf der Festplatte suchen.
Übergänge in Titelspur Wie bereits erwähnt, können Sie die Übergangseffekte auch auf die Titelspur legen. Verfahren Sie dazu genauso wie bei einem Übergangseffekt auf einem Videoclip.
Abbildung 7.39: Übergänge lassen sich auch auf Titel anwenden, um diese ein- bzw. auszublenden
161
Tipp
Kapitel 7 – Titel
Standardlänge eines Titels anpassen Die Standardlänge für einen Titel können Sie im Menü unter Setup und Projekt-Voreinstellungen ändern. Standardlänge heißt, dass neu hinzugefügte Titel bereits eine bestimmte Länge auf der Timeline haben, ohne dass diese zuerst angepasst werden muss.
Abbildung 7.40: Verändern Sie die Standardlänge für Titel
Geben Sie in das Feld Titel und Bilder ein, wie lange ein neuer Titel in der Timeline dargestellt werden soll. Das gilt nur für Titel, die nach der Veränderung in die Timeline gezogen werden, und nicht für bereits bestehende.
Weitere Vorlagen erwerben Sie können in der Dropdown-Liste im Album unter Mehr Titel ... weitere Vorlagen käuflich erwerben. Dazu benötigen Sie eine Internetverbindung. Sie können weitere Vorlagen allerdings auch auf einem Datenträger wie einer CD oder DVD im Fachhandel oder im Onlineshop von Pinnacle unter www.pinnaclesys.de oder www.avid.de kaufen.
Abbildung 7.41: Weitere Titelvorlagen können online gekauft werden
162
Titel neu erstellen
Titel neu erstellen Sie können einen Titel komplett neu erstellen. Klicken Sie im Menü Toolbox auf Titel erstellen oder wählen Sie aus der Video-Toolbox folgendes Symbol.
Abbildung 7.42: Über dieses Symbol können Sie Titel neu erstellen
Sie haben grundsätzlich vier Möglichkeiten, einen Titel neu zu erstellen.
Abbildung 7.43: Mit der Titel-Funktion können Sie einen neuen Titel auf der Timeline erstellen
Motion-Overlaytitel und klassische Overlaytitel Der Overlaytitel wird auf der Titelspur erzeugt, ein dahinter liegendes Video kann mit der Transparenz sichtbar gemacht werden. Das ist sinnvoll, wenn Sie einen Titel über ein bewegtes Video legen möchten. Mit dem klassischen Overlaytitel wird der klassische Titeleditor geöffnet, wie es weiter oben in diesem Kapitel beschrieben wurde.
Klassische Vollbildtitel und Vollbild-Motiontitel Ein Vollbildtitel wird auf der Videospur erzeugt und hat einen statischen Hintergrund, eine Farbe oder ein Bild. Benutzen Sie diese Art Titel bei einem nicht bewegten Hintergrund. Grundsätzlich können Sie einen Titel noch nach dem Erstellen beliebig auf die Videospur oder die Titelspur ziehen und ihn in einen Overlay- oder Vollbildtitel ändern. Sobald Sie eine der vier Möglichkeiten gewählt haben, öffnet sich entweder der Klassische- oder der Motion-Titeleditor.
163
Kapitel 7 – Titel
Titel bearbeiten mit der Video-Toolbox Einen Titel können Sie mit einem Doppelklick in den Titeleditor laden. Eine andere Möglichkeit besteht darin, die Video-Toolbox zu öffnen und mit dem Scrubber auf einen Titel zu scrubben. Nun können Sie mit der Schaltfläche Titel bearbeiten den Titeleditor öffnen.
Abbildung 7.44: Klicken Sie auf die Schaltfläche Titel bearbeiten, um den aktuellen Titel in den Titeleditor zu laden
164
8 MotionTiteleditor Hinweis
Ultimate & Ultimate Collection Diese Funktion ist nur in Pinnacle Studio HD Ultimate und Pinnacle Studio HD Ultimate Collection Version 15 verfügbar. Der Motion-Titeleditor ist eine weitere Möglichkeit, Titel in Pinnacle Studio HD zu erstellen. Mit dem Motion-Titeleditor können Sie Texte, Videos, Bilder und Grafikelemente in einem Titel animieren, z.B. ein Videoclip im Hintergrund und ein Textelement im Vordergrund. Bilder, Videos und Grafikelemente können beliebig kombiniert und skaliert werden, und das in einfachster Weise.
Titeleditor öffnen Sie können den Motion-Titeleditor auf unterschiedliche Weisen öffnen. 쐽 Klicken Sie mit der rechten Maustaste auf der Timeline an die Stelle, an der ein neuer Titel erstellt werden soll, und wählen Sie aus dem Menü Zum Motion-Titeleditor verzweigen oder doppelklicken Sie mit der Maus auf die Titelspur.
Abbildung 8.1: Öffnen Sie den Motion-Titeleditor mit einem Rechtsklick in die Timeline
165
Kapitel 8 – Motion-Titeleditor 쐽 Wählen Sie aus dem Menü Toolbox/Titel erstellen und klicken Sie dann auf MotionOverlaytitel oder Vollbild-Motiontitel.
Abbildung 8.2: Öffnen Sie den Motion-Titeleditor über die Video-Toolbox
쐽 Als letzte Möglichkeit können Sie eine Motion-Titel-Vorlage aus dem Album in die Timeline einfügen. Wählen Sie im Menü Album/Titel und aus der Dropdown-Liste den Eintrag Standard-Motion-Titel. Ziehen Sie eine Vorlage auf die Timeline und öffnen Sie den Titeleditor durch Doppelklick auf den Titel.
Abbildung 8.3: Motion-Titel-Vorlagen werden direkt aus dem Album geladen
166
Titeleditor
Titeleditor Der Titeleditor wird geöffnet. Je nachdem, auf welche Weise Sie den Editor geöffnet haben, ist bereits ein Textelement vorhanden. Falls nicht, können Sie individuelle Elemente hinzufügen.
Abbildung 8.4: Der Motion-Titeleditor
Auf der linken Seite können Sie die zu verwendenden Elemente wählen, Videos, Fotos, Grafikobjekte und natürlich die Textelemente. Im unteren Bereich sehen Sie eine Timeline, auf der die einzelnen Elemente vereinfacht dargestellt und weitere Parameter gewählt werden können. Insgesamt können bis zu acht Elemente im Motion-Titeleditor hinzugefügt und kombiniert werden.
Achtung
Videoclips und Fotos Im Motion-Titeleditor haben Sie die Möglichkeit, ein Videoclip oder ein Foto als Hintergrund zu verwenden oder mehrere Clips miteinander zu kombinieren. Wenn Sie in Pinnacle Studio HD eine dritte Videospur benötigen, können Sie einen Motion-Titel erstellen und lediglich einen Videoclip in den Motion-Titel einfügen.
167
Achtung
Kapitel 8 – Motion-Titeleditor Um Videoclips oder Fotos in einem Motion-Titel zu verwenden, gehen Sie wie folgt vor: 1. Öffnen Sie den Motion-Titeleditor wie zu Beginn des Kapitels beschrieben. 2. Klicken Sie auf der linken Seite auf das Video- oder Fotosymbol.
Abbildung 8.5: Videoclips können über das Videosymbol in den Motion-Titel eingefügt werden
3. Laden Sie das gewünschte Video mit dem Button Videodateien aus einem anderen Verzeichnis auswählen in den Editor oder laden Sie unter Photos mit Für Titel einen anderen Ordner auswählen die Fotos.
Abbildung 8.6: Videos werden über das Symbol Videodateien aus einem anderen Verzeichnis eingefügt
4. Ziehen Sie nun den gewünschten Videoclip oder ein Foto per Drag&Drop in den Titelbereich oder doppelklicken Sie auf den Clip, um diesen zu übernehmen.
168
Titeleditor
Skalieren Sie können die Größe des eingefügten Clips verändern, indem Sie mit der Maus einen der acht Ziehpunkte packen und ziehen.
Abbildung 8.7: Durch Ziehen mit der Maus an den Ziehpunkten kann die Größe verändert werden
Die Proportionen können beibehalten werden, indem Sie die Taste (ª) betätigen, bevor und während Sie einen Ziehpunkt mit der Maus ziehen.
Positionieren Die Clips können Sie mit der Maus im Editor positionieren, indem Sie diese mit dem Vierpfeilsymbol verschieben.
Abbildung 8.8: Positionieren Sie die Clips durch Ziehen mit der Maus
169
Kapitel 8 – Motion-Titeleditor
Drehen Ein Clip kann gedreht werden, indem mit der Maus auf den orangefarbenen, abgerundeten Pfeil in der Mitte geklickt und gezogen wird.
Abbildung 8.9: Clips können im Editor gedreht werden
Achtung
Es ist möglich, mehrere Videos und Fotos in den Motion-Titeleditor zu laden. Die Videos werden alle gleichzeitig abgespielt. So können mehrere Clips als Bild-in-BildClips verwendet werden.
Abbildung 8.10: Mehrere Videoclips in einem Titel als Bild-in-Bild-Funktion
170
Titeleditor
Objekte Objekte sind grafische Elemente, die bereits im Lieferumfang von Pinnacle Studio HD mit dabei sind.
Abbildung 8.11: Grafikobjekte im Motion-Titeleditor
Diese Objekte können wie Videoclips oder Fotos per Drag&Drop in den Titelbereich gezogen, skaliert, positioniert und gedreht werden.
Abbildung 8.12: Grafikobjekte werden per Drag&Drop oder Doppelklick in den Titel übertragen
Textelemente Das Hauptelement eines Titels ist natürlich das Textelement. Sie können im MotionTiteleditor Textelemente platzieren, die im Film als Beschriftungen, Titel, Untertitel usw. dienen. Jedes der eingefügten Textelemente kann im Titeleditor animiert werden.
171
Kapitel 8 – Motion-Titeleditor
Textelement hinzufügen Falls noch kein Textelement im Editor zu sehen ist, können Sie ein neues wie folgt erstellen: 1. Klicken Sie auf das T-Symbol – Text hinzufügen. Achtung
Im Motion-Titeleditor können maximal acht Elemente eingefügt werden.
Abbildung 8.13: Ein neues Textelement wird durch einen Klick auf das T-Symbol erstellt
Im Editor erscheint ein neues Textsymbol, das gleichzeitig ausgewählt ist. Das ist an den acht Ziehpunkten zu sehen. Weitere Texte können mit dem T-Symbol zum Titel hinzugefügt werden.
Abbildung 8.14: Ein neues Textelement wird nach dem Erstellen automatisch ausgewählt
2. Ändern Sie nun den Text, indem Sie mit der Tastatur einen neuen Text schreiben. Durch Drücken der Eingabetaste können Sie weitere Zeilen schreiben, wie Sie dies aus einem Textverarbeitungsprogramm kennen.
Schriftart, Schriftgröße, Ausrichtung Die Schriftart, Größe und Ausrichtung des Textes können Sie mit den Symbolen am oberen Rand des Titeleditors ändern. Abbildung 8.15: Schriftart, Größe und Ausrichtung kann für jedes Textelement verändert werden
Bevor Sie die Schriftart und Größe eines Textelements verändern können, muss dieses mit der Maus ausgewählt werden. Sie sehen, dass ein Textelement ausgewählt ist, wenn der Text grau hinterlegt ist.
Abbildung 8.16: Ein ausgewählter Text ist grau hinterlegt
172
Titeleditor Wählen Sie nun eines der beiden Symbole Schrift vergrößern, Schrift verkleinern aus, um die Größe der Schrift zu verändern. Abbildung 8.17: Die Größe der Schrift kann durch Anklicken der Symbole vergrößert oder verkleinert werden
Sie können die Größe exakt angeben, indem Sie die Zahl unter Schriftgröße anpassen.
Schriftart Es stehen Ihnen alle Schriftarten zur Verfügung, die Sie auf Ihrem PC installiert haben. Wählen Sie einfach aus der Dropdown-Liste eine Schriftart aus, und die selektierte Schrift wird im Editor entsprechend geändert.
Abbildung 8.18: Die Schriftart wird über die Dropdown-Liste verändert
Fett, Kursiv und Unterstrichen Wenn Sie die Schrift fett, kursiv oder unterstrichen darstellen möchten, wählen Sie eines der Symbole aus.
Abbildung 8.19: Symbole für Fett, Kursiv und Unterstrichen
173
Kapitel 8 – Motion-Titeleditor
Textausrichtung Die Textausrichtung können Sie mit der Funktion Textausrichtung verändern.
Abbildung 8.20: Textausrichtung
Nach links bedeutet linksbündig, Nach rechts rechtsbündig, Zentriert und Justieren stellen einen Blocksatz dar, wenn mehrere Zeilen geschrieben sind.
Textfluss Mit der Funktion Textfluss können Sie eine Schrift rückwärts darstellen, von oben nach unten, die Zeilen vertauschen usw.
Abbildung 8.21: Den Textfluss verändern
Dauer Mit der Einstellung Dauer können Sie die Länge des Titels auf der Timeline verändern. Sie können einen Titel aber auch auf der Timeline länger oder kürzer trimmen, um die Anzeigedauer zu verändern. Abbildung 8.22: Die Anzeigedauer eines Titels kann im Titeleditor oder auf der Timeline verändert werden
In Abbildung 8.22 dauert der Titel vier Sekunden. Die erste Null steht für die Stunden, dann kommen Minuten, Sekunden und am Schluss Einzelbilder. Wenn Sie einen Titel z.B. viereinhalb Sekunden darstellen möchten, müssen Sie 0:00:04:12 eingeben, da eine Sekunde aus 25 Einzelbildern besteht.
Textlayout Mit Textlayout oder im Titeleditor unter Looks können die Farben, Umrandungen und die Schattierung einer Schrift angepasst werden. Sie können aus vordefinierten Layouts auswählen oder das Layout manuell an Ihre Bedürfnisse anpassen.
174
Titeleditor
Abbildung 8.23: Unter Looks kann das Layout von Textelementen angepasst werden
Voreinstellungen Sie können im Register Voreinstellungen eine Layoutvorlage auswählen. Wählen Sie dazu ein Textelement aus und doppelklicken Sie auf eine Voreinstellung. Das Layout wird direkt übernommen.
Einstellungen Im Register Einstellungen können Sie das Layout manuell anpassen.
Abbildung 8.24: Unter Einstellungen kann das Layout manuell angepasst werden
Im oberen Bereich befinden sich drei Symbole, mit denen Sie neue Looks hinzufügen können.
175
Kapitel 8 – Motion-Titeleditor
Abbildung 8.25: Verändern Sie die Oberfläche, Umrandung oder die Schattierung
Grundsätzlich können Sie für jedes Textelement im Titeleditor eigene Looks hinzufügen. Sie können die Oberflächenfarbe eines Textelements anpassen, die Umrandung und die Schattierung beeinflussen. Gehen Sie dazu wie folgt vor: 1. Erstellen Sie im Titeleditor ein Textelement und wählen Sie dieses mit der Maus aus. 2. Klicken Sie auf Looks und öffnen Sie das Register Einstellungen. 3. Wählen Sie z.B. Oberfläche hinzufügen, um die Oberflächenfarbe des Textelements zu ändern. Achtung
Unter Einstellungen finden Sie eine Liste mit allen Looks, die für das gewählte Textelement zugewiesen sind. Wenn dem Textelement bereits der Look Oberfläche zugewiesen wurde, können Sie zwar einen weiteren Look Oberfläche hinzufügen, diese werden dann allerdings übereinander dargestellt. Wenn also ein Textelement bereits einen Look Oberfläche besitzt, müssen Sie nicht unbedingt einen neuen Look hinzufügen, sondern können einen bestehenden anpassen. Klicken Sie dazu einfach auf das kleine Pluszeichen vor der Bezeichnung des Looks wie in Abbildung 8.26 dargestellt.
Abbildung 8.26: Anzeigen der Detail-Einstellungen eines Looks
Abbildung 8.27: Durch Verändern der Parameter kann das Aussehen des Textes verändert werden
176
Titeleditor 4. Ändern Sie die Parameter durch Ziehen an den Schiebereglern oder durch die Eingabe eines Werts in das entsprechende Eingabefeld. Ein Look kann mittels Doppelklick umbenannt werden, sodass Sie die einzelnen Looks besser identifizieren können.
Abbildung 8.28: Die Bezeichnung eines Looks kann durch Doppelklick auf den Namen geändert werden
Fügen Sie nun weitere Looks mit den drei Symbolen Oberfläche hinzufügen, Kontur hinzufügen und Schatten hinzufügen hinzu. In der Liste der Looks erscheinen die gewählten Looks.
Abbildung 8.29: Looks können durch Klicken auf das Papierkorbsymbol gelöscht werden
Ein Look kann wieder entfernt werden, indem auf das kleine Papierkorbsymbol geklickt wird. Der letzte Look kann nicht entfernt werden, da sonst das Textelement nicht mehr zu sehen ist. Im Prinzip sollte jedes Textelement mindestens den Look Oberfläche besitzen, da sonst die Schrift nicht zu sehen wäre. Mit dem Button Look-Speicher können Sie Ihre Einstellungen so speichern, dass Sie das nächste Mal ein Textelement schnell mit dem gleichen Look versehen können. Der Look wird auf der Festplatte in eine .ixLook-Datei gespeichert. Wenn Sie den Look in dem vorgeschlagenen Ordner sichern, kann die Datei später im Register Voreinstellungen in der Dropdown-Liste unter Meine Looks einem Textelement hinzugefügt werden.
Abbildung 8.30: Unter Meine Looks sind die eigenen Looks verfügbar
177
Kapitel 8 – Motion-Titeleditor
Hintergrund definieren Für jeden Titel können Sie eine Hintergrundgrafik, ein Hintergrundvideo oder eine Farbe definieren, indem Sie ein Bild oder eine Farbe auswählen. Dies geschieht über die Hintergrundfunktion in der unteren linken Ecke des Editors.
Abbildung 8.31: Hinzufügen eines Hintergrundbildes oder einer Hintergrundfarbe
Hintergrundgrafik oder -video Sie können ein Foto oder eine Videosequenz als Titelhintergrund wählen, indem Sie eine Grafikdatei oder einen Videoclip per Drag&Drop in das Hintergrundfeld ziehen. Falls Sie den Hintergrund wieder transparent dargestellt haben möchten, dann klicken Sie einfach auf das Hintergrund entfernen Symbol.
Abbildung 8.32: Ziehen Sie ein Foto mit der Maus in den Hintergrundbereich
178
Abbildung 8.33: Der Hintergrund kann durch einen Klick auf das Papierkorbsymbol entfernt werden
Hintergrund definieren
Hintergrundfarbe Sie können eine Farbe aus einer Farbpalette wählen oder mit dem Pipettensymbol eine Farbe aus einer Grafik oder einem Videoclip kopieren. Gehen Sie dazu wie folgt vor: 1. Klicken Sie auf das Schachbrettsymbol, um die Farbpalette zu öffnen.
Abbildung 8.34: Farbpalette für die Farbauswahl
2. Wählen Sie aus der Palette die gewünschte Farbe aus und klicken Sie dann auf OK. Die Farbe wird nun für den ganzen Titel als Hintergrund definiert. Mit dem vertikalen Schieberegler können Sie die Opazität, also Transparenz, des Hintergrunds ändern. Ziehen Sie einfach mit der Maus den Schieberegler nach links. Das Resultat ist sofort sichtbar.
Abbildung 8.35: Ändern der Opazität bzw. Transparenz der Hintergrundfarbe
Die Hintergrundfarbe können Sie wieder entfernen, indem Sie mit der Maus auf das Hintergrund entfernen-Symbol klicken.
Abbildung 8.36: Hintergrundfarbe entfernen
179
Kapitel 8 – Motion-Titeleditor
Objekte animieren Sie haben nun gesehen, wie Sie Videoclips, Fotos, Grafikobjekte und Texte im Editor hinzufügen können. Diese Elemente können Sie nun individuell animieren lassen. Was sich vielleicht sehr komplex anhört, ist in der Praxis sehr einfach. Einem Objekt können grundsätzlich drei Zustände zugewiesen werden: Eingangsanimation: Es wird definiert, wie ein Objekt oder eine Schrift erscheint. Das kann z.B. ein Text sein, der geschrieben wird wie auf einer Schreibmaschine, Buchstabe für Buchstabe, oder ein Videoclip kann durch Drehbewegungen im Editor erscheinen. Ausgangsanimation: Es wird definiert, wie ein Objekt oder eine Schrift verschwindet oder ausgeblendet wird. Emphase-Animation: Damit wird definiert, wie ein Objekt während der ganzen Anzeigedauer animiert wird. Eine Emphase-Animation kann mit einer Eingangs- und Ausgangsanimation kombiniert werden. Die im Editor angewandten Objekte werden auf einer neuen Titel-Timeline angeordnet und können danach einzeln animiert werden. Die Timeline bezieht sich immer nur auf die Länge und Inhalte der Objekte im Titeleditor.
Abbildung 8.37: Timeline im Motion-Titeleditor
Mit dieser neuen Timeline können Sie den Startpunkt einer Animation festlegen und definieren, wie lange eine Animation dauern soll. Am besten probieren Sie das einfach einmal aus: 1. Erstellen Sie eine Schrift im Motion-Titeleditor und selektieren Sie diese mit der Maus. 2. Wählen Sie nun auf der linken Seite das Symbol Motion für die Animation aus.
Abbildung 8.38: Unter Motion werden die Animationen hinzugefügt
180
Objekte animieren 3. Wählen Sie das Register Eingang, um das Erscheinen des Textes zu definieren. 4. Doppelklicken Sie auf einen Effekt, z.B. Type, wenn der Text wie mit einer Schreibmaschine geschrieben werden soll. Der Effekt wird nun auf das gewählte Objekt/Schrift angewendet und in der Timeline angezeigt.
Abbildung 8.39: Der gewählte Effekt wird auf der Timeline am Anfang des Clips mit einer gestrichelten Linie dargestellt
Wie Sie sehen, beginnt der Titel sofort in einer Vorschau abzuspielen. Auf der Timeline fährt ein Scrubber und zeigt die aktuelle Position im Vorschaufenster an. Auf der Timeline, in der Ebenenliste auf der linken Seite, ist der Text an oberster Stelle. Im ersten Drittel der obersten Spur ist eine gestrichelte Linie zu sehen, die stellvertretend für den soeben angewandten Effekt steht. 5. Wählen Sie nun das Register Beenden, um das Ausblenden oder Verschwinden des Textes zu definieren.
Abbildung 8.40: Im Register Beenden kann das Ausblenden des Textes oder eines Objekts definiert werden
6. Doppelklicken Sie auf einen Effekt. Auf der Timeline, am Ende der obersten Spur, sehen Sie nun wieder eine gestrichelte Linie. An dieser Position wird der Text ausgeblendet und verschwindet.
181
Kapitel 8 – Motion-Titeleditor
Abbildung 8.41: Am Ende des Clips ist der Ausgangseffekt als gestrichelte Linie zu sehen
7. Drücken Sie auf die (Leertaste) oder klicken Sie auf die Wiedergabe-Schaltfläche, um das Resultat in der Vorschau zu sehen.
Titelvorschau Falls die Titelvorschau nicht automatisch startet, können Sie sie mit folgenden Symbolen starten.
Abbildung 8.42: Wiedergabe und Spuloptionen
Klicken Sie auf die Wiedergabe-Schaltfläche (das Dreieck), um die Vorschau abspielen zu lassen. Mit den äußeren Schaltflächen kann an den Anfang oder an den Schluss der Timeline gesprungen werden. Mit den beiden mittleren Schaltflächen kann ein Bild nach links oder nach rechts gespult werden.
Effekt löschen Sie können einen Effekt, den Sie auf ein Objekt angewandt haben, sehr einfach wieder löschen. Klicken Sie dazu in der Timeline des Motion-Titeleditors auf das kleine Kreuzsymbol des Effekts.
Abbildung 8.43: Effekte werden durch einen Klick auf das Kreuz gelöscht
Anzeigedauer anpassen Die Länge des Titels können Sie unter Dauer im oberen rechten Bereich des Titeleditors anpassen. Wenn Sie aber den Eingangs- und Beenden-Effekt beschleunigen oder verlangsamen möchten, müssen Sie dies mit der Maus auf der Timeline tun. Gehen Sie dazu wie folgt vor:
182
Objekte animieren 1. Wählen Sie den Text oder das Objekt aus, dessen Effekt Sie verlangsamen oder beschleunigen möchten. 2. Bewegen Sie den Mauszeiger an den Schluss eines Eingangseffekts oder an den Anfang eines Beenden-Effekts, bis das Doppelpfeilsymbol erscheint.
Abbildung 8.44: Ein Effekt kann in der Anzeigedauer durch Ziehen mit der Maus verändert werden
3. Ziehen Sie nun mit der Maus nach links, um einen Eingangseffekt zu verkürzen, oder nach rechts, um einen Eingangseffekt zu verlängern. Analog dazu gehen Sie bei Beenden-Effekten vor. Je kürzer ein Effekt, also die gestrichelte Linie, dargestellt ist, umso schneller wird der Effekt ausgeführt, je länger ein Effekt, umso langsamer.
Anzeigeposition Wenn Sie mehrere Objekte miteinander in einem Titel anzeigen lassen möchten, können Sie dies sehr einfach bewerkstelligen. Platzieren Sie einfach die gewünschten Videos, Fotos, Objekte und Schriften in den Editor. Wie Sie sehen, gibt es für jedes Objekt im Editor auf der Timeline ein neues Objekt. Alle platzierten Objekte beginnen zur gleichen Zeit und enden nach Ablauf des Titels. Dies muss aber nicht unbedingt so sein. Sie können definieren, zu welcher Zeit welches Objekt wie erscheint und wieder ausgeblendet wird. Ziehen Sie dazu einfach mit der Maus den Anfang oder das Ende eines Objekts auf der Timeline, es funktioniert so ähnlich, wie Sie es vom Trimmen auf der Timeline von Pinnacle Studio HD kennen.
Abbildung 8.45: Nicht alle Objekte müssen zur gleichen Zeit starten
Wie Sie in Abbildung 8.45 sehen können, erscheint als Erstes das Textobjekt, dann das Bild und zum Schluss das Video. Zum Verändern und Positionieren der einzelnen Objekte im Zeitablauf gehen Sie wie folgt vor: 1. Platzieren Sie zuerst mehrere Objekte in den Titeleditor. 2. Bewegen Sie die Maus an den Anfang oder an den Schluss eines Objekts in der Timeline, um deren Start bzw. Endpunkt zu definieren.
183
Kapitel 8 – Motion-Titeleditor 3. Sobald das Doppelpfeilsymbol erscheint, können Sie die linke Maustaste gedrückt halten und die Maus nach links oder rechts bewegen, um die Länge des Objekts zu verkürzen bzw. zu verlängern.
Abbildung 8.46: Objekte lassen sich verkürzen und verschieben
In Abbildung 8.46 sehen Sie drei Objekte: eine Textebene, ein Bild und ein Video. Wenn dieser Titel abgespielt wird, wird als Erstes der Text angezeigt, dann erscheint das Bild und zum Schluss das Video. Als Erstes verschwindet das Bild, dann das Video und zum Schluss der Text. Die einzelnen Objekte lassen sich mit der Maus auch nach vorne oder an den Schluss verschieben. Fahren Sie dazu mit der Maus auf ein Objekt in der Timeline, bis der Mauszeiger in ein Vierpfeilsymbol wechselt. Ziehen Sie dann das gekürzte Objekt in der Timeline nach links oder nach rechts. Sie können nun für jedes Element eine Animation hinzufügen. Markieren Sie einfach zuvor das Objekt in der Timeline und wählen Sie dann aus dem Motion-Menü einen Effekt.
Reihenfolge ändern Sie können in einem Motion-Titel Videos und Fotos verkleinert darstellen und nebeneinander Bild-in-Bild anordnen. Eine andere Möglichkeit ist, ein Bild oder ein Video im Hintergrund darzustellen. Dabei kommt es aber darauf an, welches Objekt im Vorderund welches im Hintergrund dargestellt werden soll. Sie können dies ändern, indem Sie in der Ebenenliste die einzelnen Objekte anders anordnen.
Abbildung 8.47: Die Ebenen können per Drag&Drop nach oben oder nach unten gezogen werden
Ziehen Sie in der Ebenenliste mit der Maus das gewünschte Objekt nach oben oder unten, um die Hierarchie der Anzeige zu verändern.
Abbildung 8.48: Die Ebene kann beliebig angeordnet werden
184
Objekte animieren Die Reihenfolge in der Ebenenliste hat direkt mit der Anzeige der Objekte im Editor zu tun. Objekte auf der obersten Ebene befinden sich im Hintergrund. Ein Objekt auf der zweiten Ebene wird über einem Objekt in der ersten Ebene angezeigt usw. Sie können ein Objekt in den Hinter- oder Vordergrund setzen, indem Sie die Ebenen nach oben bzw. nach unten verschieben oder im Editor mit der rechten Maustaste anklicken.
Abbildung 8.49: Ein Objekt kann über das Kontextmenü (Rechtsklick und dann Klick auf Ebene) in den Hinter- oder Vordergrund gesetzt werden
Wählen Sie Ebene und dann die gewünschte Option aus der Liste aus, um das Objekt in der Anzeigehierarchie zu verändern. Eine weitere Variante, um ein Objekt in der Ebene zu verändern, erfolgt über das EbeneSymbol oberhalb der Timeline. Wählen Sie einfach auf der Timeline ein Objekt aus und klicken Sie dann auf Ebene, um die Optionen anzeigen zu lassen.
Abbildung 8.50: Mit der Funktion Ebene können die Objekte in den Hinteroder Vordergrund gesetzt werden
185
Kapitel 8 – Motion-Titeleditor
Ebene sperren und ausblenden Einzelne Ebenen bzw. Objekte können im Motion-Titeleditor auf der Timeline ein- bzw. ausgeblendet werden. Wenn eine ganze Ebene nicht mehr verändert werden soll, kann diese zusätzlich gesperrt werden. Klicken Sie für das Ein- bzw. Ausblenden auf das Augensymbol neben dem Ebenennamen. Für das Sperren einer Spur klicken Sie auf das Schlosssymbol.
Abbildung 8.51: Ebenen können ein- bzw. ausgeblendet oder mit dem Schlosssymbol gesperrt werden
Objekte kopieren, einfügen und löschen Sie können einzelne Objekte im Titeleditor kopieren, um z.B. weitere Textelemente im gleichen Layout zu erstellen. Sie können Objekte einfach mit der Windows-Standardfunktion (Strg) und (C) kopieren und mit (Strg) und (V) einfügen. Ein Objekt können Sie mit der Taste (Entf) löschen. Eine weitere Möglichkeit bietet der Titeleditor mit den Funktionen kopieren und einfügen oberhalb der Timeline.
Abbildung 8.52: Objekte können kopiert und wieder eingefügt werden
Mit dem Papierkorbsymbol können Sie Objekte aus dem Titeleditor löschen.
186
9 Standbilder und Diashow Standbilder sind Fotos von einer Digitalkamera oder Grafiken, die Sie auf dem PC gespeichert haben. Sie können mit diesen Bildern und Fotos eine Diashow zusammenstellen, indem Sie sie aneinanderreihen, wie Sie das bereits mit Videoclips gemacht haben. Eine solche Diashow können Sie auf einem normalen TV-Gerät anzeigen lassen. Mit Pinnacle Studio HD erstellte Diashows können auch durch Musik und Übergänge ergänzt werden; die Bilder lassen sich darüber hinaus auf der Timeline animieren. In Pinnacle Studio HD können zwar die Farben von Fotos verändert werden, allerdings sollten der Bildausschnitt und die weitere Bildbearbeitung in einem Grafikprogramm vorgenommen werden. Pinnacle Studio HD lässt sich dagegen hervorragend dafür einsetzen, Fotos und Bilder aneinanderzureihen und mit Übergangseffekten zu versehen. Ein weiterer Vorteil einer erstellten Diashow mit Pinnacle Studio HD besteht darin, dass diese auf eine DVD oder Blu-ray Disc gebrannt werden kann, um sie später mit einem entsprechendem Player abzuspielen.
Einfügen von Standbildern In Pinnacle Studio HD ist es möglich, einen Film durch Standbilder und Fotos zu ergänzen oder nur mit Bildern zu arbeiten. Sämtliche Bearbeitungsmöglichkeiten, die Sie für Videoclips kennengelernt haben, gelten auch für Fotos und Bilder auf der Timeline. Wählen Sie das Register Photos im Album auf der Registerkarte Bearbeiten aus, um Ihre Fotos ins Album zu laden. In Pinnacle Studio können folgende Bildformate importiert werden: GIF, JPG/JPEG, BMP, TGA, TIF, PCX, PNG, WMF und das Photoshop-Format PSD.
Abbildung 9.1: Mit diesem Symbol im Album lassen sich Fotos und Bilder anzeigen
Wenn Sie eine Diashow mit Bildern erstellen wollen, gehen Sie wie folgt vor: 1. Wechseln Sie im Album in den Photo-Modus oder wählen Sie aus dem Menü Album den Eintrag Photos. 2. Wählen Sie über das Ordnersymbol den Speicherort auf Ihrer Festplatte aus, an dem sich die Fotos befinden.
187
Kapitel 9 – Standbilder und Diashow
Abbildung 9.2: Klicken Sie auf das Ordnersymbol, um Ihre Fotos ins Album zu laden
3. Suchen Sie den Ordner auf Ihrer Festplatte, in dem sich Ihre Bilder befinden. 4. Doppelklicken Sie auf eine Grafik bzw. ein Foto im Verzeichnis. Es kommt nicht darauf an, welches Bild Sie hier auswählen, da alle Bilder aus demselben Ordner ins Album von Pinnacle Studio HD geladen werden.
Abbildung 9.3: Alle Fotos in einem Ordner werden ins Album geladen
Alle Fotos im gewählten Ordner werden dargestellt. Sie können die Bilder einzeln oder zu mehreren in die Timeline legen. Das funktioniert genauso wie das Einfügen von Videoclips, Pinnacle Studio HD macht hier keinen Unterschied. Wenn Sie ein Bild in eine leere Timeline einfügen möchten, erscheint folgendes Fenster:
Abbildung 9.4: Einem neuen Film Bilder hinzufügen
Pinnacle Studio HD fragt danach, ob die Timeline in der Standardauflösung 720 x 576 oder in der High-Definition-Auflösung 1440 x 1080 erstellt werden soll. Entsprechend werden die Bilder dann in die gewählte Auflösung skaliert.
188
Einfügen von Standbildern Laden Sie nie Fotos oder Bilder direkt von einer CD oder DVD in das Album, sondern kopieren Sie sie immer zuerst auf die Festplatte. Diese Bilder verschwinden nämlich aus Pinnacle Studio HD, wenn die CD oder DVD aus dem Laufwerk genommen wird. Mit der Importieren-Funktion unter Ansicht/importieren können Sie die Fotos direkt von einer Kamera oder einem Speicherchip auf die PC-Festplatte kopieren. Die Fotos werden danach sofort in das Album importiert. Standbilder sind im Gegensatz zu Videoclips Bilder, die eine bestimmte Zeit stehen bleiben. Wenn also ein Foto auf der Timeline über eine Sekunde dargestellt werden soll, so wird das Bild 25-mal hintereinander angezeigt, da im PAL-System geschnitten wird (wo eine Sekunde 25 Bilder hat). Das übernimmt Pinnacle Studio HD für Sie. Sie können die Länge eines Fotos auf der Timeline im Prinzip bis ins Unendliche ziehen. Trimmen und Schneiden funktionieren wie bei einem Videoclip. Pinnacle Studio HD passt die Größe eines Bildes auf der Timeline immer der Größe des Videobildes an. Wenn ein Foto aber nicht das gleiche Seitenverhältnis wie die Videoeinstellung hat, kann es vorkommen, dass zu beiden Seiten des Bildes schwarze Ränder entstehen.
Abbildung 9.5: Hier wurde ein Bild mit dem Seitenverhältnis 4:3 in ein Projekt mit 16:9-Einstellung eingefügt. Dadurch entstehen links und rechts schwarze Ränder
Standardlänge Wenn Sie für eine Reihe von Fotos eine bestimmte Länge auf der Timeline wünschen, ist es sehr mühsam, auf der Timeline jedes einzelne Bild länger oder kurzer zu machen. Um eine Standardlänge vorzugeben, gehen Sie in die Einstellungen mit Setup/ProjektVoreinstellungen. Wählen Sie eine beliebige Standardlänge für die Standbilder. Hierbei handelt es sich um die gleiche Einstellung wie für die Standardlänge eines Titels, da dieser im Prinzip wie ein Standbild behandelt wird.
189
Achtung
Kapitel 9 – Standbilder und Diashow
Abbildung 9.6: Einstellen der Länge eines Fotos oder Standbildes, das neu in die Timeline eingefügt wird
Diese Änderung bezieht sich nur auf Fotos, die neu auf die Timeline gezogen werden, und nicht auf bereits bearbeitete Bilder, die dort schon liegen.
Schwarze Ränder entfernen Wenn im Vorschaufenster oben und unten oder links und rechts schwarze Ränder angezeigt werden, dann entspricht das Bild nicht genau dem Seitenverhältnis des Projekts. Sie können diese aber schnell und einfach entfernen, indem Sie das Foto ein wenig vergrößern. Allerdings wird dann entweder oben und unten oder links und rechts vom Foto ein kleiner Teil abgeschnitten. 1. Klicken Sie mit der rechten Maustaste auf ein Foto. 2. Wählen Sie dann den Eintrag Bild auf Framegröße hochzoomen.
Abbildung 9.7: Wählen Sie Bild auf Framegröße hochzoomen, um schwarze Balken zu entfernen
Wenn Sie mehrere Fotos gleichzeitig anpassen möchten, wählen Sie diese zuerst mit der Maus aus und wiederholen die Funktion für alle gleichzeitig.
190
Foto animieren
Foto animieren Um einen Film noch interessanter zu gestalten, bietet Ihnen Pinnacle Studio HD die Möglichkeit, ein Foto auf der Timeline zu animieren. Animation heißt, dass Sie ein Foto so bewegen können, als hätten Sie eine Kamerafahrt oder einen Zoom in das Bild eingebaut. Um diesen Effekt zu erzielen, müssen die Fotos vergrößert und bewegt werden. Ein Beispiel dazu folgt weiter unten. Natürlich bewegt sich der Inhalt eines Fotos nicht. Je nachdem, wie das Foto animiert wird, kann es sein, dass es digital vergrößert, also gezoomt, werden muss, was einen Qualitätsverlust nach sich zieht. Jedes Foto besteht aus Bildpunkten, sogenannten Pixeln, die verschiedene Farben haben. Beim Zoomen eines Bildes werden diese einzelnen Bildpunkte vergrößert. Dadurch verliert das Bild an Qualität. Wie Sie wissen, hat ein Standardvideobild in der PAL-Auflösung 720 x 576 Bildpunkte (das wird auch Standard Definition genannt) was etwa 0,414 Megapixeln entspricht. Die meisten mit einer Digitalkamera aufgenommenen Fotos haben allerdings eine weitaus größere Auflösung als ein Videobild. Wenn eine Grafik in einer Animation vergrößert wird, muss sie mehr Bildpunkte aufweisen als das Videobild. Sobald ein Pixel einer Grafik größer als ein Pixel im Video dargestellt wird, entsteht ein Qualitätsverlust. Die folgenden Grafiken sollen das veranschaulichen.
Abbildung 9.8: Die meisten Fotos haben eine höhere Auflösung als die Videoauflösung
Hier sehen Sie, dass das Originalbild gegenüber der Videoauflösung viel größer ist. Je nach Anzahl der Pixel bei Ihrer Kamera ist dieses Verhältnis entsprechend anders.
Abbildung 9.9: Die Fotos werden von Pinnacle Studio HD verkleinert dargestellt, sodass sie ins Vorschaufenster passen
Pinnacle Studio HD verkleinert alle Grafiken so, dass sie der Videoauflösung entsprechen.
191
Kapitel 9 – Standbilder und Diashow
Abbildung 9.10: So würde ein Foto aussehen, das digital gezoomt wird, bis die einzelnen Pixel zu sehen sind
Hier sehen Sie die stark vergrößerte Ansicht eines gezoomten Bildes. Die einzelnen Pixel, die als Artefakte erscheinen, sind sichtbar geworden. Beachten Sie beim Erstellen einer Diashow Folgendes: Jede Grafik, sei sie ursprünglich auch noch so gut, wird immer auf die Größe der Videoauflösung verkleinert. Je höher die Videoauflösung ist, umso besser ist die Qualität der Diashow. Die Bilder werden in Pinnacle Studio HD aber in einen Film mit einer niedrigeren Auflösung umgewandelt und verlieren dabei an Schärfe und Qualität. Um eine Animation zu erstellen, gehen Sie wie folgt vor: 1. Doppelklicken Sie auf ein Standbild auf der Timeline, um den Animationseditor zu öffnen.
Abbildung 9.11: Mit einem Doppelklick auf ein Bild in der Timeline wird der Animationseditor geöffnet
Sie können sich grundsätzlich entscheiden, ob Sie das Bild vergrößern bzw. verkleinern möchten oder ob sich das Bild von Anfang bis Ende animiert bewegen soll. Von einer Animation spricht man, wenn sich das Bild während des Abspielens bewegt. 2. Um das Foto zu animieren, aktivieren Sie im Editor die Option Von Anfang bis Ende animieren.
Zoom Mit dem Schieberegler unter Zoom können Sie die Grafik vergrößern und verkleinern.
192
Foto animieren
Pan Pan bedeutet, dass der gezeigte Ausschnitt im Bild verschoben werden kann. Um den Ausschnitt zu wählen, klicken Sie mit der Maus in das linke Vorschaufenster und ziehen das Bild in die gewünschte Richtung. Das Foto ist jetzt zwar verändert worden, aber das ist noch lange keine Animation, da sich das Bild beim Abspielen des Films nicht bewegt. Um daraus eine Animation zu machen, wählen Sie die Option Von Anfang bis Ende animieren. Verändern Sie nun nacheinander die Position des Fotos am Anfang und am Schluss der Animation, indem Sie zuerst die Option Startpunkt wählen und die Einstellungen vornehmen und danach die Option Endpunkt und ebenfalls die Parameter einstellen. Pinnacle Studio HD passt nun die Bilder zwischen Start- und Endpunkt automatisch an. Wenn Ihnen die Animation nicht gefällt, können Sie durch einen Klick auf Zurücksetzen die Einstellungen löschen. Wenn Sie auf der Timeline zweimal hintereinander die gleiche Grafik haben, können Sie die Einstellungen für den Startpunkt der zweiten Grafik an den Endpunkt der ersten Grafik anpassen, um so eine erweiterte Animation zu erhalten. Sobald einer Grafik eine Animation zugewiesen wird, erhält sie unten links ein Sternsymbol.
Abbildung 9.12: Das Sternsymbol zeigt an, dass auf diesen Clip ein Effekt angewendet wurde
Bild drehen Sie können die Ausrichtung des Bildes verändern, indem Sie dieses entweder nach links oder nach rechts drehen. Eine Grafik kann immer um 90 Grad nach links oder rechts gedreht werden, um das Bild im Video richtig zu stellen. Wenn Sie eine Grafik schräg darstellen möchten, laden Sie sie in einen leeren Titel und verändern deren Lage wie in Kapitel 7 „Titel“ beschrieben. Zum Drehen benutzen Sie die beiden unten gezeigten Symbole.
Abbildung 9.13: Mithilfe dieser beiden Symbole können Sie Bilder drehen oder auf den Kopf stellen
193
Kapitel 9 – Standbilder und Diashow
Rote Augen entfernen Bei manchen Porträts sehen die Augen der fotografierten Person rot aus. Sie können solche roten Augen direkt in Pinnacle Studio HD korrigieren. Gehen Sie dazu wie folgt vor: 1. Legen Sie das entsprechende Foto auf die Timeline. 2. Doppelklicken Sie auf das Bild, um den Editor zu laden. 3. Klicken Sie auf das Augensymbol im unteren Bereich des Editors. 4. Ziehen Sie mit der Maus ein Rechteck über das Auge. Achten Sie darauf, dass das Rechteck nicht nur über die Pupille gezogen wird, sondern auch darüber hinaus. Pinnacle Studio HD braucht eine Referenz zu anderen Farben, um den Effekt anzuwenden.
Abbildung 9.14: Ziehen Sie mit der Maus ein Rechteck um das Auge, um den Effekt anzuwenden
5. Sie können den Effekt wieder rückgängig machen, indem Sie auf das Symbol mit dem gebogenen Pfeil rechts neben dem Augensymbol klicken.
194
10 Musik und Audiobearbeitung Videos leben nicht allein von Bildern, auch der Ton spielt eine wichtige Rolle. Sie können einzelne Videoszenen mit Musik und Sounds hervorheben oder auch bestimmte Eindrücke beim Zuschauen erzeugen. Dazu können Sie in Pinnacle Studio HD Soundeffekte, Musik und Kommentare als Audioeinspielungen verwenden.
Soundeffekte Soundeffekte sind kurze Audiostücke mit Geräuschen oder Klängen aus der Alltagswelt. Diese Effekte lassen sich beliebig in den Filmablauf einfügen, falls einmal Applaus oder das Brummen eines vorbeifahrenden Autos fehlt. Pinnacle Studio HD bietet Ihnen eine große Palette von Beispielsounds an und zusätzlich die Möglichkeit, weitere Soundeffekte über das Internet zu erwerben. Klicken Sie auf das Soundeffekte-Symbol, um die Bibliothek im Album auf der Registerkarte Bearbeiten zu öffnen, oder wählen Sie aus dem Menü Album/Soundeffekte.
Abbildung 10.1: Mit diesem Symbol wechseln Sie im Album zu den Soundeffekten
Sobald das Symbol gewählt wird, öffnet Pinnacle Studio HD die vorinstallierten Soundeffekte und lädt sie ins Album. Die Soundeffekte sind in verschiedenen Kategorien zusammengefasst. Wählen Sie eine Kategorie bzw. einen Ordner mit einem Doppelklick aus und suchen Sie nach dem Soundeffekt, den Sie zu Ihrem Projekt hinzufügen möchten. Um den Effekt vor dem Einfügen anzuhören, klicken Sie mit der Maus darauf. Falls Sie Effekte aus einer anderen Kategorie anhören möchten, klicken Sie einmal auf das Symbol Eine Ebene nach oben, und schon sind Sie wieder in der Übersicht.
195
Kapitel 10 – Musik und Audiobearbeitung
Abbildung 10.2: Wählen Sie eine der Kategorien aus, um deren Inhalt anzuzeigen
Sie können auch eigene Effekte von Ihrer Festplatte in das Album laden, indem Sie das Ordnersymbol anklicken und eine Datei auf Ihrer Festplatte wählen. Soundeffekte sind Musikdateien, die Sie von einer Audio-CD auf den PC kopiert oder mit einem Mikrofon aufgenommen haben. Soundeffekte sind ganz normale Musikstücke im MP3- und WAV-Format. Abbildung 10.3: Mit dem linken Symbol können Sie zur Übersicht zurückkehren, mit dem rechten Audiodateien aus einem anderen Verzeichnis wählen
Effekt anwenden Ziehen Sie den gewünschten Soundeffekt aus der Bibliothek im Album per Drag&Drop auf die Soundeffekte-Spur in der Timeline. Der Effekt kann wie ein Titel noch im Nachhinein verschoben und getrimmt werden. Es ist auch möglich, den Effekt auf die Musikspur zu legen bzw. gleichzeitig einen zweiten Effekt auf dieser Spur zu verwenden. Sie haben zusätzlich zu den Originaltonspuren zwei Musikspuren zur Verwendung für Ihren Film.
Abbildung 10.4: Der Soundeffekt wird auf die entsprechende Spur gelegt
Der Effekt kann auf der Timeline mit dem Handsymbol verschoben, wie üblich geschnitten und getrimmt oder in den Trimm-Editor geladen werden. Oft sind die Soundeffekte im Verhältnis zum Originalton Ihres Films zu laut, darum muss die Lautstärke eines Effekte-Clips angepasst werden. Wie Sie das machen, erfahren Sie im nächsten Abschnitt; die Vorgehensweise ist bei Musik und Effekten gleich.
Musik Musik dient im Film als Hintergrundkulisse oder in einem Musikvideo als primäres Element. In Pinnacle Studio HD ist es möglich, Musik von der Festplatte oder einer CD zu verwenden.
196
Audiobearbeitung Klicken Sie im Album auf folgendes Symbol, um das Musik-Register zu öffnen, oder wählen Sie aus dem Menü Album/Musik.
Abbildung 10.5: Dieses Symbol öffnet das Register für Musik im Album
Sie können alle Musikdateien ins Album laden, die bereits auf Ihrer Festplatte gespeichert sind, greifen also auf ein möglicherweise bereits bestehendes Archiv zu. Folgende Formate lassen sich im Album anzeigen: Wave-Dateien (WAV), MP3-, MPA-, AVI-, AC3-, M4A- und Windows Media-Audiodateien (WMA). Darüber hinaus können Sie nur die Audiospur eines bereits bestehenden Videos in das Album laden. Das kann nützlich sein, wenn Sie z.B. einen Kommentar in die Kamera gesprochen haben, das dazugehörende Video aber nicht verwenden.
Abbildung 10.6: Sie können Ihre Musikdateien im Album anzeigen lassen
Öffnen Sie einen Ordner mit Musikdateien über das Ordnersymbol. Sie können die Musikdateien entsprechend den Soundeffekten per Drag&Drop in die Timeline legen und positionieren. Setzen Sie die Musik auf die Musik- oder Soundeffekte-Spur. Wollen Sie ein Musikstück vor dem Einfügen anhören, klicken Sie mit der Maus darauf. Wenn Sie den Film auf der Timeline anhören, sind möglicherweise bestimmte Audiospuren im Verhältnis viel zu laut oder zu leise. Um das zu regulieren, können Sie einen sogenannten Audiomix erstellen.
Audiobearbeitung Die Lautstärke eines Musikclips kann entweder in der Timeline direkt auf dem Clip oder im Audiobearbeitungs-Modus geändert werden. Sie haben vielleicht schon bemerkt, dass ein Audioclip überall dort in der Timeline, wo etwas zu hören ist, einen Wellenlinienverlauf bekommen hat. Hohe Wellen bedeuten laute Töne, kleine Wellen leise Töne. Damit können Sie bereits vor dem Hören eines Clips dessen Lautstärke sehen. Nun können Sie die Lautstärke anpassen, denn das Brüllen eines Löwen unmittelbar vor der Kamera sollte lauter sein als das eines brüllenden Löwen, der in einer Entfernung von hundert Metern aufgenommen wurde.
197
Kapitel 10 – Musik und Audiobearbeitung
Abbildung 10.7: Die Wellenlinien stehen für leise und laute Töne
Lautstärke anpassen Klicken Sie mit der Maus auf den zu verändernden Clip. Sobald der Clip dunkel markiert ist, sehen Sie eine orange horizontale Linie, welche die relative Lautstärke anzeigt. Wenn die Lautstärke noch nicht verändert wurde, ist diese Linie auf etwa 75 % eingestellt. Bewegen Sie die Maus auf diese Linie, sehen Sie, dass der Mauszeiger zu einem Pfeilsymbol mit Lautsprecher wird.
Abbildung 10.8: Der Mauszeiger wird zu einem Lautsprechersymbol, sobald er über die orange Linie bewegt wird
Klicken Sie nun mit der Maus auf die Linie, halten Sie die linke Maustaste gedrückt und ziehen Sie diese Linie nach oben, um die Lautstärke an diesem Punkt lauter zu machen; wenn Sie die Linie nach unten ziehen, wird der Ton leiser.
Abbildung 10.9: Die Lautstärke kann einfach verändert werden, indem die Lautstärkenlinie nach oben bzw. nach unten gezogen wird
Pinnacle Studio HD erzeugt einen sogenannten Justierungsziehpunkt, das ist ein Viereck auf der orangefarbenen Linie, und passt die Linie horizontal an, da die Software annimmt, dass Sie den ganzen Clip lauter oder leiser machen möchten. Wenn der Clip an einer bestimmten Stelle wieder lauter sein soll, erzeugen Sie mit der Maus an dieser Stelle einen neuen Ziehpunkt.
Abbildung 10.10: Erstellen Sie für jede Veränderung der Lautstärke einen neuen Justierungsziehpunkt
Diese Ziehpunkte können im Nachhinein wieder gelöscht oder verändert werden. Fahren Sie mit der Maus auf einen der Punkte. Das Symbol des Mauszeigers sieht nun etwas anders aus als vorher. Der Pfeil und das Lautsprechersymbol werden türkis dargestellt. Klicken und ziehen Sie, um die Lautstärke zu verändern. Um den Ziehpunkt
198
Die Audio-Toolbox zu löschen, ziehen Sie ihn über den Clip hinaus nach oben oder nach unten, bis er verschwindet.
Abbildung 10.11: Ein Justierungsziehpunkt kann gelöscht werden, indem er über den Clip hinausgezogen wird
Jede Veränderung der Audiolautstärke sollte kurz angehört und kontrolliert werden, was dazu führt, dass das Mischen von Audio für einen ganzen Film recht viel Zeit in Anspruch nimmt. Wenn Sie alle Justierungsziehpunkte eines Clips auf einmal löschen möchten, klicken Sie mit der rechten Maustaste auf den Clip und wählen Lautstärke-Änderung entfernen.
Balance und Stereoeffekt Sie können auch die Informationen eines Audioclips für den linken und den rechten Ausgabekanal verändern, um so eine Stereomischung zu erreichen. Klicken Sie mit der rechten Maustaste auf den zu verändernden Clip und wählen Sie Auswahl Balance-Anzeige.
Abbildung 10.12: Klicken Sie mit der rechten Maustaste auf einen Clip, um dessen Balance bzw. Stereoinformationen anzuzeigen
Der Clip wird grün und mit einer Linie in der Mitte dargestellt. Die Linie bedeutet hier nicht mehr die Lautstärke des Audioclips, sondern zeigt an, ob das Audio links oder rechts aus dem Lautsprecher zu hören ist. Die Linie muss sich in der Mitte befinden, da der Clip im linken und rechten Lautsprecher gleich laut zu hören ist. Erzeugen Sie nun Justierungsziehpunkte, wie Sie es für die Lautstärke getan haben. Ein Ziehpunkt unterhalb der Mitte bedeutet, dass der Ton stärker auf dem rechten Lautsprecher ausgegeben wird, bei einem Ziehpunkt über der Mitte wird der Ton stärker aus dem linken Lautsprecher ausgegeben. Um alle Justierungsziehpunkte von einem Audioclip zu löschen, klicken Sie mit der rechten Maustaste auf den Clip und wählen Balance-/Fade-Änderungen entfernen.
Die Audio-Toolbox Weitere Audiobearbeitungen und -einstellungen können Sie in der Audio-Toolbox vornehmen. Klicken Sie auf das Lautsprechersymbol in der linken oberen Ecke der Timeline, um sie zu öffnen.
199
Kapitel 10 – Musik und Audiobearbeitung
Abbildung 10.13: Mit der Audio-Toolbox stehen weitere Funktionen zur Audiobearbeitung zur Verfügung
Sie können die Audio-Toolbox auch über die Menüleiste mit Toolbox/Lautstärke ändern öffnen. Über dem Album wird nun die Audio-Toolbox geöffnet. Im linken Bildbereich erscheinen weitere Funktionen für die Bearbeitung, die nachfolgend erklärt werden.
Abbildung 10.14: In der Audio-Toolbox stehen weitere Funktionen für das Bearbeiten von Musik und Effekten zur Verfügung
Lautstärke Wie Sie bereits gesehen haben, kann die Lautstärke mit der Maus direkt in der Timeline angepasst werden. Sie können diese Anpassungen allerdings auch mithilfe der Lautstärkeregler in der Audio-Toolbox vornehmen, ähnlich wie an einem Audiomischpult. Für jede Audiospur auf der Timeline wird ein separater Regler angezeigt, zuzuordnen am kleinen Symbol über jedem Regler. Beim Abspielen des Films sehen Sie zudem die Lautstärke der Audioclips in der Pegelanzeige. Falls sich ein Clip im grünen und gelben Bereich befindet, ist die Lautstärke in Ordnung. Versuchen Sie, nicht in den roten Bereich zu gelangen, da der Ton dann übersteuert wird. Schieben Sie den Regler nur so weit nach oben, bis der Pegel etwa bis 0 dB ausschlägt.
Abbildung 10.15: Die Pegelanzeige wird neben jedem der Regler angezeigt. Die Lautstärken sollten sich bei 0 dB einpegeln
Scrubben Sie im Film an die Position, an der das Audio korrigiert werden soll, und verschieben Sie danach den Lautstärkeregler nach oben oder nach unten.
200
Die Audio-Toolbox
Abbildung 10.16: Beim Verschieben eines Reglers mit der Maus erhält der entsprechende Clip zwei Justierungsziehpunkte
Wie Sie sehen, erzeugt Pinnacle Studio HD bei dieser Variante zwei Ziehpunkte, was zu einer abrupten Lautstärkeänderung führt. Falls Sie das nicht wünschen, verändern Sie die Lautstärke direkt im Clip auf der Timeline.
Abbildung 10.17: Wird das Audio mittels des Schiebereglers verändert, gibt es eine abrupte Lautstärkeänderung
Sie können die Lautstärke auch beim Abspielen des Films mit dem Regler korrigieren. Spielen Sie dazu den Film ab und ziehen Sie mit der Maus an einem der Schieberegler, um die Lautstärke zu verändern. Wenn ein Schieberegler inaktiv ist, bedeutet dies, dass an der Position des Timeline-Scrubbers kein Audioclip vorhanden ist. Eine andere Möglichkeit, die Lautstärke zu verändern, ist, in das Zahlenfeld einen Wert einzugeben, um den ein Audioclip lauter bzw. leiser eingestellt werden soll.
Abbildung 10.18: Verändern Sie die Lautstärke um einen bestimmten dB-Wert
Fade-in und Fade-out Am Anfang oder Ende eines Audioclips kann der Ton ein- bzw. ausgeblendet werden. Dies lässt sich erreichen, indem am Anfang des Clips ein Ziehpunkt gesetzt wird, der ganz unten am Clip positioniert wird. Ein zweiter Ziehpunkt wird etwas später positioniert, und zwar an der Stelle, an der das Audio die normale Lautstärke erreichen soll. Etwas einfacher geht das wie folgt. 1. Scrubben Sie auf der Timeline an die Stelle, an der das Audio ausgeblendet sein soll. 2. Klicken Sie auf eines der folgenden Symbole der entsprechenden Audiospur.
Abbildung 10.19: Das linke Dreieckssymbol blendet das Audio in der entsprechenden Spur ein, das rechte blendet es aus
201
Kapitel 10 – Musik und Audiobearbeitung 3. Korrigieren Sie gegebenenfalls die gesetzten Ziehpunkte, um das Resultat zu verfeinern.
Abbildung 10.20: Auf dem Audioclip werden zwei Ziehpunkte erzeugt, und das Audio wird ausgeblendet
Die Dauer der Tonblende lässt sich in den Einstellungen über das Menü Setup unter Voreinstellungen anpassen.
Master-Volume Falls Sie nach Beendigung der Arbeit an einem Soundmix das Gefühl haben, eine bestimmte Spur sei etwas zu laut oder zu leise geraten, können Sie die Lautstärke einer ganzen Spur im Nachhinein verändern. Dazu dienen die folgenden Drehknöpfe: Abbildung 10.21: Drehen Sie an einem dieser Knöpfe, um die Lautstärke einer Spur insgesamt zu verändern
Klicken Sie mit der Maus und „drehen“ Sie am Knopf, um die Lautstärke einer Spur zu verändern. Wenn Sie das Gefühl haben, der ganze Film sei zu laut oder zu leise, dann müssten Sie jeden einzelnen Clip bzw. jede einzelne Spur nachkorrigieren. Dies wäre sehr viel Arbeit. Um die Lautstärke des gesamten Films zu ändern, dient der Gesamtlautstärke-Regler auf der rechten Seite. Mit ihm können Sie die Lautstärke des ganzen Films, also aller Clips und aller Spuren, gleichzeitig regeln. Beim Verändern der Gesamtlautstärke werden auf den Audioclips keine weiteren Ziehpunkte gesetzt.
Abbildung 10.22: Um die Lautstärke des ganzen Films zu verändern, können Sie diesen Schieberegler verwenden
Stereo Im rechten Bereich sehen Sie einen von oben gezeigten virtuellen Raum mit zwei Lautsprechern vorne links und rechts sowie einem Kreuz in der Mitte. Das Kreuz steht für die Position des Betrachters des Films. Das bedeutet, dass das Audio von vorne links und rechts zu hören ist. Für jede Audiospur erscheint zwischen den beiden Lautsprechern ein runder Punkt mit einem entsprechenden Symbol, je nachdem, welcher Clip auf der Timeline gewählt ist. Das Symbol ist in der Mitte der beiden Lautsprecher und bedeutet, dass das Audio im Raum aus beiden Lautsprechern gleich laut zu hören ist. Sie können nun mit der Maus dieses Symbol nach links oder rechts bewegen, um die Stereoinformation im Raum zu verändern.
202
Die Audio-Toolbox
Abbildung 10.23: Für jede der benutzten Spuren erscheint im virtuellen Raum ein Symbol
Im Beispiel wurde die Originaltonspur nach links verschoben und die Soundeffekte-Spur nach rechts. Diese Symbole sind nur dann alle sichtbar, wenn an der Stelle des AudioScrubbers auch alle Spuren belegt sind. Auf der Timeline sind die Änderungen ebenfalls an der veränderten Balance-Anzeige zu erkennen. Für das obige Beispiel sieht die Timeline wie folgt aus:
Abbildung 10.24: Analog zur obigen Grafik wurde die Balance der drei Spuren geändert
Damit eine Balance-Änderung nicht zu abrupt ist, sollte zwischen den beiden Ziehpunkten am Anfang oder am Schluss etwas Abstand eingehalten werden, sodass die Flanke etwas schräg wird.
Surround Wählen Sie aus der Dropdown-Liste über dem virtuellen Raum Surround aus, um das Audio im ganzen Raum hörbar zu machen:
Abbildung 10.25: Wenn Surround gewählt wurde, können Sie den Audioclip im ganzen Raum hörbar machen
203
Kapitel 10 – Musik und Audiobearbeitung Ziehen Sie dazu das Symbol beliebig umher. Beachten Sie, dass Sie für jede einzelne Spur Surround einschalten müssen, klicken Sie also der Reihe nach alle Spuren an und schalten Sie sie auf Surround. Achtung
Surround Voraussetzung zum Hören von Surround ist, dass auf dem Abspielgerät, dem DVDPlayer oder dem PC, ein sogenanntes Surround-Sound- oder Home-Cinema-System vorhanden ist. Dadurch erhalten Sie als Betrachter den Eindruck, mitten im Geschehen zu sein, wie man das in einem Kino erleben kann. Sie können also selbst bestimmen, von wo ein Audioclip zu hören ist. Allerdings bräuchte es für eine richtige SurroundMischung weitaus mehr Audiospuren, als sie Pinnacle Studio HD zur Verfügung stellt, denn für jeden der Lautsprecher sollten mehrere Audioeffekte zu hören sein. Empfehlenswert ist das Pinnacle-Surround aber dennoch. Beim Bearbeiten von Surround muss jeder Audioclip zusätzliche Informationen erhalten. Sie haben bereits die Lautstärke und die Stereoinformation kennengelernt. Nun braucht es aber noch eine weitere Information für vorne und hinten, nämlich die FadeFunktion. Um sie in einem Clip anzeigen zu lassen, klicken Sie mit der rechten Maustaste auf den Clip und wählen Auswahl Fade-Anzeige.
Abbildung 10.26: Zusätzlich zur Lautstärke und Balance kann auch die Fade-Anzeige genutzt werden
Wie Sie sehen, können Sie die Fade-Informationen mittels der Ziehpunkte oder im virtuellen Raum direkt bearbeiten. Wenn Sie Fade-Informationen löschen möchten, klicken Sie mit der rechten Maustaste auf den Clip und wählen Balance-/Fade-Änderungen entfernen.
Für Sprache optimiert Diese Option, die Sie ebenfalls in der Ansicht des virtuellen Raums auswählen können, fügt einen fünften Lautsprecher zwischen die beiden vorderen ein. Das ist das eigentliche 5.1-Surround. Der Punkt mit der Ziffer 1 bei 5.1 steht für den sechsten Lautsprecher, den Bass, der nur die tiefen Töne des Films ausgibt. Der zusätzliche Lautsprecher in der Mitte wird auch Center genannt und dient zum Ausgeben von Sprache.
Abbildung 10.27: Der fünfte Lautsprecher in der Mitte dient zur Ausgabe der Sprache
204
Die Audio-Toolbox
Mikrofonaufnahme Sie haben in Pinnacle Studio HD die Möglichkeit, im Nachhinein einen Kommentar auf Ihren Film zu sprechen oder durch eine andere Person sprechen zu lassen. Hierfür benötigen Sie ein Mikrofon, das sich am Mikrofoneingang des Computers anschließen lässt.
Konfigurieren eines Mikrofons Zum korrekten Konfigurieren eines Mikrofons gehen Sie wie folgt vor: Variante für Windows XP 1. Schließen Sie das Mikrofon über die Soundkarte an den Mikrofoneingang an. 2. Wählen Sie in Windows XP Start/Einstellungen/Systemsteuerung.
Abbildung 10.28: Das Lautsprechersymbol öffnet den Dialog zum Einstellen der Sounds und Audiogeräte
3. Doppelklicken Sie auf Sounds und Audiogeräte. 4. In den Eigenschaften wählen Sie im Register Lautstärke die Schaltfläche Erweitert.
Abbildung 10.29: Über die Schaltfläche Erweitert lassen sich weitere Einstellungen vornehmen
5. Im Bereich Lautstärke regeln für wählen Sie Aufnahme. 6. Setzen Sie ein Häkchen bei Mikrofon und bestätigen Sie mit OK. Nun ist das Mikrofon aktiviert.
205
Kapitel 10 – Musik und Audiobearbeitung
Abbildung 10.30: Setzen Sie ein Häkchen bei Mikrofon, um diesen Eingang einzuschalten
7. Schließen Sie das Aufnahmefenster mit einem Klick auf OK. Variante für Windows Vista und Windows 7 1. Schließen Sie das Mikrofon über die Soundkarte an den Mikrofoneingang an. 2. Wählen Sie in Windows Vista Start/Systemsteuerung/Hardware und Sound/Audiogeräte verwalten.
Abbildung 10.31: Hier gelangen Sie zum Dialog zum Einstellen der Sounds und Audiogeräte
206
Die Audio-Toolbox 3. Im Register Aufnahme wählen Sie das angeschlossene Mikrofon aus.
Abbildung 10.32: Wählen Sie das zu konfigurierende Mikrofon aus
4. Klicken Sie auf Eigenschaften, um die Einstellungen anzupassen.
Abbildung 10.33: In den Eigenschaften werden alle Mikrofoneinstellungen vorgenommen
Je nach Soundkarte und Treiberversion variieren die Angaben und Einstellungsmöglichkeiten der Eigenschaften. 5. Achten Sie darauf, dass die Geräteverwendung des Mikrofons eingeschaltet ist. 6. Im Register Pegel kann die Lautstärke des Mikrofonpegels eingestellt werden. Eventuell müssen Sie diese Einstellungen erst korrigieren, wenn der Audiopegel in Pinnacle Studio HD zu schwach ist.
207
Kapitel 10 – Musik und Audiobearbeitung 7. Schließen Sie das Aufnahmefenster mit einem Klick auf OK.
Abbildung 10.34: Verändern Sie wenn nötig den Audiopegel und Microphone und Microphone Boost
Audioaufnahme 1. Öffnen Sie in Pinnacle Studio HD die Audio-Toolbox und dann die Funktion für die Aufnahme mit einem Mikrofon oder wählen Sie aus dem Menü Toolbox/Filmkommentare aufnehmen.
Abbildung 10.35: Modus für das Nachvertonen von Filmen mit einem Mikrofon
Tipp
Wenn Sie in das Mikrofon sprechen, sollte in der Anzeige die Lautstärke auf der rechten Seite zu sehen sein. Korrigieren Sie allenfalls die Eingangslautstärke durch das Verschieben des Reglers neben der Pegelanzeige. Eine Aufnahme in Pinnacle Studio HD ist nur möglich, wenn sich der TimelineScrubber an einer Position befindet, an der die Audiokommentar-Spur nicht schon mit einem anderen Clip gefüllt ist, da Sie lediglich zwei Audiospuren zur Verfügung haben. Sie können den aufgenommenen Kommentar natürlich jederzeit im Film neu positionieren. Der Vorteil dieser Vorgehensweise ist, dass Sie Ihren Kommentar synchron zum Film abgeben können.
208
Die Audio-Toolbox Die Aufnahme eines Kommentars mit Mikrofon ist nicht immer ganz einfach. Es kommt sehr stark auf die Qualität des Mikrofons an, darauf, für welchen Zweck das Mikrofon ausgelegt ist, und auf die Nebengeräusche während der Aufzeichnung. So gibt es für den Einsatz mit Video sogenannte Richtmikrofone, die über eine gewisse Distanz in eine bestimmte Richtung aufnehmen, und es gibt die Nierenoder Kugelmikrofone, die das Audio im Bereich des Mikrofons aufzeichnen. Falls Sie bereits ein Mikrofon besitzen, machen Sie doch eine kurze Testaufnahme und entscheiden Sie, ob Sie mit der Qualität zufrieden sind. Ansonsten lassen Sie sich von einer Fachperson beraten, um ein optimales Ergebnis zu erzielen. Nebengeräusche sollten wenn möglich eliminiert werden, auch das Brummen eines PCs kann in einem Film sehr nervend wirken. Falls Sie kein Eingangssignal sehen, dann müssen Sie in Pinnacle Studio HD einstellen, welcher Audioeingang für das Mikrofon verwendet wird. Öffnen Sie im Menü Setup/Video- und Audio-Voreinstellungen. Wählen Sie dann unter Mikrofon den entsprechenden Mikrofoneingang aus, an dem das Mikrofon angeschlossen ist.
Abbildung 10.36: Einstellungen für das Mikrofon
2. Starten Sie die Aufnahme mit einem Klick auf die Schaltfläche Aufnahme. Warten Sie, bis der Aufnahmebutton blinkt und der Film zu laufen beginnt. Sprechen Sie nun Ihren Kommentar ein. 3. Sobald Sie fertig sind, können Sie den Vorgang mit einem Klick auf Stop beenden. Der aufgezeichnete Kommentar ist in der Timeline zu sehen und kann nun beliebig weiterverarbeitet werden. 4. Sollte die Aufnahme nicht zu gebrauchen sein, dann löschen Sie den Audioclip von der Timeline und wiederholen die Aufnahme. 5. Sie können den Kommentar auch in mehreren Abschnitten aufnehmen oder ein Stück in der Mitte neu aufzeichnen, wenn das notwendig ist.
209
Kapitel 10 – Musik und Audiobearbeitung
Audio-CD importieren Sie haben die Möglichkeit, Musik oder Geräusche direkt von einer Audio-CD in Pinnacle Studio HD zu importieren, ohne sie auf der Festplatte zwischenzuspeichern. Empfehlenswert ist es trotzdem, diese Audiodateien mit einem externen Programm auf die Festplatte zu kopieren, da sie dann immer – auch für andere Projekte – zur Verfügung stehen. Achtung
Praktisch alle Musik-CDs sind nicht für den öffentlichen oder kommerziellen Gebrauch lizenziert. Sie dürfen die Musik also nicht mit Ihren Filmen weiterverkaufen oder diese öffentlich vorführen, außer Sie erwerben entsprechende Lizenzen für meistens sehr viel Geld. Andernfalls (und das ist die Regel bei Hobbyfilmern) müssen Sie spezielle Musik erwerben, die GEMA- bzw. SUISA-frei ist. Wenn Sie ein Musikarchiv erworben haben, für das Sie die Rechte besitzen, dürfen Sie es auch kommerziell nutzen.
Aufnehmen von einer Audio-CD Falls Sie mehrere CD- oder DVD-Laufwerke in Ihrem PC installiert haben, müssen Sie Pinnacle Studio HD zuerst mitteilen, von welchem Laufwerk Sie Audio aufnehmen möchten. Gehen Sie dazu wie folgt vor: 1. Öffnen Sie die Einstellungen im Menü mit Setup/Video- und Audio-Einstellungen. 2. Unter CD-Laufwerk wählen Sie aus der Liste das Laufwerk aus, von dem Sie Audio aufnehmen möchten. 3. Legen Sie nun eine Audio-CD in das Laufwerk und klicken Sie in der Audio-Toolbox auf das unten gezeigte Symbol, um in den Aufnahmemodus zu gelangen, oder wählen Sie aus dem Menü Toolbox den Eintrag CD-Musik hinzufügen.
Abbildung 10.37: Symbol für das Aufnehmen von Musik von einer CD
Falls Pinnacle Studio HD die eingelegte CD, d.h. Interpret, Album usw., nicht von selbst erkennt, müssen Sie diese Informationen manuell eingeben.
Abbildung 10.38: Geben Sie hier einen Titel für die eingelegte Audio-CD ein
4. Tippen Sie die Informationen in das Feld CD-Titel ein und bestätigen Sie mit einem Klick auf OK. Pinnacle Studio HD öffnet nun den Aufnahmemodus.
210
Automatische Hintergrundmusik
Abbildung 10.39: Im Aufnahmemodus wählen Sie einen Liedtitel unter Musiktitel aus
5. Scrubben Sie auf der Timeline an die Stelle, an der das Audio eingefügt werden soll. 6. Wählen Sie unter Musiktitel einen Liedtitel aus, den Sie in den Film integrieren möchten. 7. Fügen Sie das Lied über die Schaltfläche Zum Film hinzufügen ein.
Abbildung 10.40: Das Musikstück wird importiert
Das Lied wird in Pinnacle Studio HD importiert. Wenn dieser Vorgang abgeschlossen ist, befindet sich das Lied auf der Timeline und kann abgespielt werden.
Automatische Hintergrundmusik Die automatische Hintergrundmusik enthält eine spezielle Art von vordefinierter Musik, in Pinnacle Studio HD auch Scorefitter genannt. Wenn Sie ein Stück einer Audio-CD als Hintergrund verwenden, so hat jedes dieser Musikstücke einen Anfang und ein Ende, logisch. Die Scorefitter-Musikstücke können aber beliebig lang gezogen werden, und Pinnacle Studio HD komponiert das Ende so, dass es gut klingt! Am besten testen Sie die Funktion gleich selbst. Bis zur Version 10 von Pinnacle Studio HD war dies die SmartSound-Funktion bzw. -Bibliothek. In der Version 15 sind es keine SmartSounds mehr, sondern es handelt sich nun um eine andere, Pinnacle-eigene Technik zum Erstellen automatischer Hintergrundmusik. Die von Scorefitter erzeugte Musik liegt in 48 kHz, also in besserer Qualität, vor. Falls Sie weiterhin SmartSounds in der Version 15 nutzen möchten, dann benötigen sie das kostenpflichtige Plug-In für Pinnacle Studio HD 15 von www.smartsound.com.
Abbildung 10.41: Scorefitter-Musik in Studio HD
211
Hinweis
Kapitel 10 – Musik und Audiobearbeitung 1. Wählen Sie in der Audio-Toolbox die Funktion Automatisch Hintergrundmusik erzeugen über das unten gezeigte Symbol oder im Menü Toolbox den Eintrag Hintergrundmusik erstellen aus.
Abbildung 10.42: Mit diesem Symbol öffnen Sie die automatische Hintergrundmusik
2. Wählen Sie Ihre Musik aus den drei Kategorien Stilrichtung, Musiktitel und Version. Für jede Stilrichtung stehen ein oder mehrere Musiktitel mit verschiedenen Versionen zur Verfügung.
Abbildung 10.43: Die Scorefitter-Bibliothek ist in drei Stufen eingeteilt: Stilrichtung, Musiktitel und Version
3. Doppelklicken Sie auf eine Version, um eine Vorschau zu erhalten, oder klicken Sie auf den Vorschau-Knopf. 4. Sobald Sie die richtige Musik gefunden haben, scrubben Sie auf der Timeline an die Stelle, an der die Hintergrundmusik positioniert werden soll, und wählen Zum Film hinzufügen. Das Scorefitter-Musikstück wird auf die Timeline gelegt und ist als kurzes Stück sichtbar. Dieses Stück können Sie nun mit der Trimm-Funktion verlängern, so weit Sie möchten – Pinnacle Studio HD komponiert das Stück immer weiter.
Abbildung 10.44: Das ausgewählte Stück wird auf der Musikspur angezeigt
Für die Audiobearbeitung von Scorefitter-Musikstücken gelten die gleichen Regeln wie für die anderen Musikstücke, außer dass die Scorefitter-Musik beliebig verlängert werden kann. Falls Sie das gewählte Stück durch ein anderes ersetzen möchten, ohne die Länge nochmals zu definieren, klicken Sie den Clip auf der Timeline an und wählen aus der Scorefitter-Bibliothek ein neues Stück. Um die Änderung zu übernehmen, klicken Sie auf Änderungen annehmen.
212
Automatische Hintergrundmusik Auf Ihrem PC sind einige Scorefitter-Musikstücke vorinstalliert, die Sie mit Pinnacle Studio HD erworben haben. Sie können allerdings noch mehr erwerben. Klicken Sie dazu auf den Knopf Weitere Songs holen.
Audioeffekte Audioeffekte dienen dazu, aufgenommenes Audio zu verändern. Sie können z.B. Rauschen entfernen oder das Audio auf witzige Weise manipulieren. Einem Audioclip lassen sich mehrere Effekte gleichzeitig zuweisen. Klicken Sie in der Audio-Toolbox auf folgendes Symbol oder wählen Sie aus dem Menü Toolbox den Eintrag Audioeffekte hinzufügen, um sich die Übersicht anzeigen zu lassen.
Abbildung 10.45: Dieses Symbol öffnet die Audioeffekte-Bibliothek
Im linken Bereich unter Audioeffekte sind alle Effekte des ausgewählten Clips zu sehen; anfangs ist diese Liste natürlich leer, da noch kein Effekt hinzugefügt wurde.
Abbildung 10.46: Hier werden alle Audioeffekte aufgelistet, die Sie auf einen Audioclip anwenden können
In der Liste unter Kategorie sehen Sie eine Auflistung der möglichen Effekte, unterteilt in verschiedene Gruppen wie Studio HD-Audioeffekte und Studio Ultimate-Audioeffekte, je nachdem, welche Version von Studio HD Sie besitzen. Fügen Sie nun einem Clip einen Effekt zu: 1. Wählen Sie in der Timeline einen Audioclip aus, auf den Sie einen Effekt anwenden möchten. 2. Wählen Sie unter Effekt einen Effekt aus der Liste aus und klicken Sie auf OK, um ihn in die Liste zu übernehmen. Nun können Sie die verschiedenen Parameter ändern, um den Effekt an Ihre Wünsche anzupassen. Meistens ist es so, dass die Werte allein nicht viel über die Wirkung des Effekts aussagen, darum ist es notwendig, dass Sie den Audioclip jedes Mal anhören, nachdem Sie eine Veränderung vorgenommen haben. Nachfolgend sind einige wichtige Effekte beschrieben.
213
Kapitel 10 – Musik und Audiobearbeitung
Rauschunterdrückung Wählen Sie eine Voreinstellung oder beginnen Sie direkt mit dem Anpassen der Parameter. Ziehen Sie den Entrauschen-Schieberegler und prüfen Sie immer wieder das Resultat, indem Sie den Film abspielen. Sie können bei Wind entfernen ein Häkchen setzen. Das entfernt störende Windgeräusche, die beispielsweise bei einer Strandaufnahme entstanden sein können. Sie können alle Einstellungen wieder in den Ursprungszustand versetzen, indem Sie auf Zurücksetzen klicken.
Abbildung 10.47: Mit der Rauschunterdrückung wird störendes Rauschen aus einem Audioclip entfernt
Sie können einem Clip mehrere Effekte gleichzeitig hinzufügen, um so eine Kombination von Effekten zu erzielen. Klicken Sie hierbei einfach auf den Knopf Effekt hinzufügen, um wieder zur Übersicht zu gelangen.
Audiogeschwindigkeit Der mitgelieferte Audioeffekt Geschwindigkeit kann einen Audioclip langsamer oder schneller darstellen. Diese Funktion wird normalerweise nur zusammen mit dem gleichnamigen Videoeffekt angewendet. Sie können aber auch den Geschwindigkeitseffekt nur auf den Audioclip anwenden.
Abbildung 10.48: Mit dem Geschwindigkeitseffekt kann ein Audioclip in Zeitlupe dargestellt werden
1. Klicken Sie auf der Timeline den Audio- oder Videoclip an, von dem Sie das Audio verändern möchten. Am besten lässt sich dieser Effekt beurteilen, wenn man als Beispiel einen Clip wählt, in dem eine Person spricht. 2. Öffnen Sie die Audioeffekte in der Audio-Toolbox.
214
Automatische Hintergrundmusik 3. Fügen Sie den Effekt Geschwindigkeit hinzu. 4. Verändern Sie nun den Schieberegler Geschwindigkeit, um den Clip langsamer oder schneller laufen zu lassen. Hören Sie sich das Audio an, um den Effekt beurteilen zu können. 5. Setzen Sie ein Häkchen bei Tonhöhe halten, damit die Tonhöhe des Audioclips zwar wieder normal zu hören ist, dessen Geschwindigkeitsanpassung aber verändert bleibt. Mit dieser Funktion können Sie z.B. einen Video- oder Audioclip in der Länge verändern.
Effekt löschen Wählen Sie in der Liste den zu löschenden Effekt aus und klicken Sie auf das Papierkorbsymbol. Mit den beiden Pfeilsymbolen können Sie die Reihenfolge der Clips verändern. Je nachdem, welche Effekte Sie anwenden, spielt die Reihenfolge der Effekte eine Rolle.
215
11 Die VideoToolbox Die Video-Toolbox liefert Werkzeuge, mit denen man einen Film interessanter gestalten kann. Dazu zählen Funktionen zum Erstellen von Standbildern aus dem Film, Videoeffekte, Chroma-Key, Bild-in-Bild und vieles mehr. Die Symbole werden hier in einer anderen Reihenfolge beschrieben, als sie im Programm auftauchen, da Sie einige Funktionen schon kennen und es keinen Sinn macht, andere an der betreffenden Stelle zu erläutern. Öffnen Sie die Video-Toolbox mit dem folgenden Symbol oder wählen Sie aus dem Menü Toolbox z.B. Einzelbild aufnehmen.
Abbildung 11.1: Das Symbol der Video-Toolbox
Einzelbild aufnehmen Sie können in Pinnacle Studio HD aus dem Film Standbilder aufnehmen und sie wieder in den Film einbauen oder auf der Festplatte zwischenspeichern. Daraus lassen sich unter anderem interessante DVD-Hüllen gestalten.
Standbild aus der Timeline 1. Scrubben Sie auf der Timeline, bis das gewünschte Bild im Vorschaufenster zu sehen ist. 2. Falls die Video-Toolbox noch nicht geöffnet ist, wählen Sie aus dem Menü Toolbox/ Einzelbild aufnehmen. 3. Klicken Sie auf den Knopf Aufnahme, um das aktuelle Bild zu kopieren. 4. Entscheiden Sie nun, ob das aufgenommene Standbild zum Film hinzugefügt werden soll oder ob Sie es auf der Festplatte speichern möchten. 5. Um das Bild auf die Timeline zu legen, scrubben Sie an die gewünschte Stelle und klicken auf die Schaltfläche Zum Film hinzufügen. 6. Wenn Sie das Bild als Datei auf der Festplatte speichern möchten, klicken Sie auf Speichern und wählen einen Speicherort auf der Festplatte aus. Es lässt sich auch mit anderen Programmen weiterverarbeiten.
217
Kapitel 11 – Die Video-Toolbox
Abbildung 11.2: Klicken Sie auf Aufnahme, um ein Bild von der Timeline zu kopieren
Die zweite Videospur Mit einer zweiten Videospur haben Sie erweiterte Möglichkeiten beim Schneiden. Sie können z.B. ein Theaterstück, das mit zwei Kameras aufgenommen wurde, synchron schneiden oder einen Videoclip als Bild-in-Bild darstellen usw. Die zweite Videospur ist standardmäßig nicht sichtbar, da sie nicht von allen Anwendern benutzt wird und nicht unnötig verwirren soll. Sie wird erst angezeigt, wenn sie auch benutzt werden soll. Ziehen Sie dazu einfach einen Videoclip auf die Titelspur, und die zweite Videospur erscheint.
Abbildung 11.3: Die zweite Videospur wird sichtbar, sobald ein Videoclip auf die Titelspur gelegt wird
Der Videoclip bleibt nicht auf der Titelspur, sondern die zweite Videospur wurde sichtbar und der Clip darauf abgelegt. Die zweite Videospur enthält ebenfalls eine Originaltonspur. Die Clips auf der zweiten Spur können auf die gleiche Weise bearbeitet werden wie die auf der ersten. Wenn Sie nun den Film abspielen, werden Sie sehen, dass der Clip auf der unteren Spur den Clip auf der oberen Spur überdeckt. Achten Sie also darauf, welchen Clip Sie auf welche Spur legen, damit immer der richtige zu sehen ist. Die zweite Videospur wird benutzt, wenn z.B. der Originalton der ersten Videospur weiterlaufen soll und darüber etwas anderes zu sehen ist. Sie können die zweite Videospur wieder entfernen, indem Sie alle Clips darauf löschen. Die Spur verschwindet automatisch.
218
Bild-in-Bild
Bild-in-Bild Mit der Bild-in-Bild-Funktion ist es möglich, Standbilder oder Videoclips auf der zweiten Videospur verkleinert darzustellen. Ein Videoclip auf der ersten Spur wird gleichzeitig als Hintergrund abgespielt. Um diesen Effekt zu erzielen, gehen Sie wie folgt vor: 1. Setzen Sie einen Videoclip auf die erste Videospur, falls das noch nicht geschehen ist. 2. Setzen Sie einen zweiten Videoclip auf die zweite Videospur und wählen Sie ihn mit der Maus aus. 3. Öffnen Sie die Video-Toolbox und danach das Symbol für Bild-in-Bild oder wählen Sie aus dem Menü Toolbox/Video-Overlay-Effekte hinzufügen.
Abbildung 11.4: Symbol für die Bild-in-Bild-Funktion in der VideoToolbox
Der Bild-in-Bild-Editor wird geöffnet. Wie Sie sehen können, hat Pinnacle Studio HD das Bild auf der zweiten Videospur bereits verkleinert und im rechten oberen Eck dargestellt. Im Vorschaufenster ist dieser Effekt allerdings noch nicht zu sehen, da die Bild-in-BildFunktion noch nicht aktiviert wurde.
Abbildung 11.5: Mit dem Bild-in-BildEditor kann ein Clip verkleinert dargestellt werden
Damit dieser Effekt im Vorschaufenster zu sehen ist, klicken Sie auf die Option Bild-inBild aktivieren. Im Vorschaufenster werden nun beide Clips angezeigt. Sie haben jetzt die Möglichkeit, das Aussehen der Bild-in-Bild-Funktion weiter anzupassen. Im linken Vorschaufenster des Editors können Sie mit der Maus das Videobild vergrößern und verkleinern und an eine neue Position setzen. Gehen Sie dazu wie im Folgenden beschrieben vor.
Abbildung 11.6: Die Bild-in-Bild-Funktion wird sichtbar. Beide Videos können nun gleichzeitig abgespielt werden
219
Kapitel 11 – Die Video-Toolbox
Verschieben und Skalieren Sie können die Position des Bildes verändern, indem Sie im Editor mit der Maus auf das Vorschaubild klicken und das Video verschieben. Zum Skalieren fassen Sie einen der acht Ziehpunkte an, indem Sie mit der Maus darauf klicken und die linke Maustaste gedrückt halten. Ziehen Sie die Maus nun in die gewünschte Richtung.
Abbildung 11.7: Ziehen Sie an einem der weißen Punkte, um die Größe des Clips zu verändern
Aus der Dropdown-Liste Voreinstellungen können Sie aus vordefinierten Positionen auswählen. So gelangen Sie schneller zu einem Resultat, das Sie aber jederzeit anpassen können.
Transparenz Das verkleinerte Bild kann mit dem Schieberegler Videotransparenz unter dem Vorschaubild des Editors blasser bzw. transparent dargestellt werden. Beobachten Sie die Veränderung im Vorschaufenster.
Rand Erstellen Sie mit dieser Funktion eine Umrandung rund um den Clip, damit er besser zu sehen ist. Gehen Sie dazu wie folgt vor: 1. Klicken Sie mit der Maus auf das kleine weiße Viereck, um eine Farbe zu wählen. 2. Die Farbauswahl wird geöffnet. Klicken Sie mit der Maus die gewünschte Farbe an und schließen Sie das Fenster wieder mit einem Klick auf OK. Alternativ können Sie die Farbe mit der Pipette direkt aus dem Videobild holen. Klicken Sie mit der Maus einmal auf das Pipettensymbol und bewegen Sie danach die Maus auf das Vorschaufenster. Suchen Sie im Bild die Farbe und klicken Sie nochmals, um sie in die Auswahl zu übernehmen. 3. Wahlweise verändern Sie die Breite, Transparenz und Weichheit der Umrandung mit den entsprechenden Schiebereglern.
Schatten Fügen Sie dem Clip einen Schatten hinzu; dazu haben Sie die gleichen Möglichkeiten wie oben beschrieben. Um den Schatten sichtbar zu machen, verändern Sie den Abstand. Legen Sie fest, wie der Schatten zu liegen kommen soll, indem Sie einen der runden Kreise wählen. Das Vorschaufenster gibt Ihnen jederzeit eine Kontrolle über die gewählten Einstellungen.
220
Bild-in-Bild
Auf neue Clips anwenden Wenn Sie diese Option mit einem Häkchen aktiviert haben, werden alle Clips, die auf die zweite Videospur gezogen werden, mit denselben Einstellungen versehen. Wählen Sie diese Einstellung also dann, wenn mehrere Clips gleich aussehen sollen.
Zuschnitt Damit können Sie einen Clip am Rand beschneiden und das Seitenverhältnis verändern. Sobald Sie die Option Zuschnitt gewählt haben, wird der Clip größer dargestellt und kann nun durch Ziehen an einem der acht Ziehpunkte beschnitten werden. Obwohl der Clip in der Vorschau auf das ganze Bild vergrößert wurde, bleibt die Skalierung der Bild-in-Bild-Funktion erhalten.
Abbildung 11.8: Mit der Zuschnitt-Funktion kann der Rand eines Clips beschnitten werden
Sehen Sie sich im rechten Vorschaufenster das Resultat an. Die Zuschnitt-Funktion kann etwa dazu benutzt werden, einen Clip doppelt anzeigen zu lassen, wie es im folgenden Beispiel erläutert wird.
Abbildung 11.9: Lassen Sie ein Video mit der Bild-in-Bild-Funktion doppelt anzeigen
Einen Clip doppelt anzeigen lassen:
Tipp
1. Fügen Sie den gleichen Clip zweimal untereinander in die Timeline ein, einmal auf die erste Videospur und einmal auf die Bild-in-Bild-Videospur. 2. Öffnen Sie die Bild-in-Bild-Funktion. 3. Klicken Sie mit der Maus im Editor auf den Clip auf der ersten Videospur und verschieben Sie ihn nach links.
221
Kapitel 11 – Die Video-Toolbox 4. Klicken Sie mit der Maus im Editor auf den Videoclip auf der zweiten Spur, um diesen in den Editor zu laden. 5. Verschieben Sie ihn nun etwas nach rechts, etwa so weit, wie der erste nach links verschoben wurde. 6. Aktivieren Sie die Funktion Zuschnitt und schneiden Sie am zweiten Clip links so viel ab, bis von beiden Clips gleich viel zu sehen ist. 7. Spielen Sie nun den Clip ab, um den Effekt in der Vorschau zu überprüfen.
Chroma-Key-Funktion Die Chroma-Key-Funktion dient dazu, eine neutrale Farbe aus einem Videoclip zu entfernen und transparent darstellen zu lassen. Diese Funktion wird auch Blue- oder GreenScreen-Funktion genannt und ermöglichte z.B. Superman das Fliegen – der Schauspieler wurde vor einem blauen oder grünen Hintergrund gefilmt und dieser Hintergrund in der Nachproduktion durch eine Filmszene ersetzt. Für diesen Effekt benötigen wir ebenfalls die zweite Videospur. Die erste Videospur dient als Filmkulisse und Hintergrund. Auf die zweite Videospur wird der Clip mit der gefilmten Person gelegt. 1. Legen Sie irgendeinen Videoclip auf die erste Videospur. 2. Laden Sie von der Beispiel-DVD die Videosequenz Clowns.mpg ins Album. 3. Legen Sie die vierte Szene mit der Frau vor einem grünen Hintergrund auf die zweite Videospur. Die Timeline sollte nun etwa wie in der folgenden Abbildung aussehen.
Abbildung 11.10: Auf der zweiten Videospur befindet sich der Clip mit einem neutralen grünen Hintergrund
4. Selektieren Sie den Clip mit der Frau, sodass er aktiv ist. 5. Wechseln Sie in die Video-Toolbox und öffnen Sie den Bild-in-Bild-Editor. 6. Klicken Sie auf das Register Chroma-Key. 7. Klicken Sie auf das kleine Viereck von Chroma-Key aktivieren und betrachten Sie das Vorschaufenster. Sie können nun die beiden Clips auf der Timeline abspielen lassen. Der grüne Hintergrund wurde aus dem ganzen Clip entfernt. Das Resultat kann mit den Schiebereglern etwas verändert werden, allerdings erkennt Pinnacle Studio HD den grünen Hintergrund sehr genau.
222
Videoeffekte
Abbildung 11.11: Der grüne Hintergrund wurde entfernt, stattdessen wird der Clip auf der ersten Videospur dargestellt
Sie können diesen Effekt nachmachen, indem Sie eine Person vor ein grünes Tuch platzieren und filmen. Im Prinzip kommt es nicht darauf an, welche Farbe der Hintergrund hat, da Pinnacle Studio HD jede Farbe entfernen könnte. In Hollywood wird dagegen immer mit einem grünen oder blauen Hintergrund gearbeitet. Sie sollten allerdings grundsätzlich einige Regeln beachten, um ein sauberes Resultat zu erhalten. 쐽 Die Kleidung der gefilmten Person sollte eine andere Farbe haben als der Hintergrund, da diese sonst ebenfalls entfernt würde. 쐽 Der Hintergrund sollte genügend beleuchtet sein, und achten Sie darauf, dass die gefilmte Person keinen Schatten darauf wirft, da sonst Pinnacle Studio HD Probleme bekommen könnte. 쐽 Wenn das Video auf den PC übertragen wird, sollte immer die beste Qualitätseinstellung gewählt werden, damit der Chroma-Key-Effekt möglichst gut funktioniert. 쐽 Machen Sie vor jeder Aufnahme einen kurzen Test, damit Sie sicher sind, dass es später in Pinnacle Studio HD funktioniert.
Videoeffekte Mit der Videoeffekte-Bibliothek haben Sie die Möglichkeit, Videoclips und Bilder zu verändern. So können Sie Farben korrigieren, das Bild stabilisieren und vieles mehr. Vergessen Sie aber nicht, dass sich ein Videoclip in der eigentlichen Qualität nicht verbessern lässt. Denken Sie also nie beim Filmen: „Na, das kann ich ja dann später alles korrigieren“. Viele Effekte dienen zwar dazu, Fehler zu korrigieren, vermindern aber meistens die Qualität des Bildes. Versuchen Sie es selbst und probieren Sie die verschiedenen Einstellungen aus. Zudem finden Sie in der Effekte-Bibliothek die zusätzlichen Plug-ins der Versionen Studio HD Ultimate und Studio HD Ultimate Collection. Öffnen Sie die Video-Toolbox und klicken Sie dort auf das Effekte-Symbol, um die Bibliothek zu öffnen.
Abbildung 11.12: Symbol für die Videoeffekte-Bibliothek
Für das Anwenden auf einen Videoclip verfahren Sie wie bei den Audioeffekten. Die linke Liste zeigt alle angewendeten Effekte an, die dort auch wieder gelöscht werden können.
223
Tipp
Kapitel 11 – Die Video-Toolbox
Abbildung 11.13: Die Videoeffekte-Bibliothek ist in verschiedene Kategorien aufgeteilt. Je nach Programmversion unterscheiden sich auch die Möglichkeiten
Unter Videoeffekt hinzufügen sehen Sie die verschiedenen Kategorien und rechts daneben die jeweiligen Effekte. Die beiden Funktionen Bild-in-Bild und Chroma-Key sind im Grunde auch ganz normale Videoeffekte. Wenn Sie einen Clip anklicken, dem bereits einer dieser Effekte zugewiesen wurde, erscheint er in der Liste und kann auf diese Weise verändert oder gelöscht werden. Um einen Effekt anzuwenden, gehen Sie wie folgt vor: 1. Markieren Sie auf der Timeline den zu verändernden Clip. 2. Öffnen Sie die Videoeffekte-Bibliothek. 3. Wählen Sie den gewünschten Effekt aus der Liste Effekt aus und klicken Sie auf OK. 4. Nun erscheint je nach Effekt ein anderer Editor, in dem die einzelnen Parameter eingestellt werden können. Sobald Sie einen Effekt anwählen, sehen Sie im Vorschaubild, was mit dem Clip geschieht. Dies ist allerdings nicht bei allen Effekten so, da zum Teil zuerst gewisse Parameter eingestellt werden müssen. Nachfolgend sind einige wichtige Effekte näher erläutert. Es ist manchmal, oder sogar immer, notwendig, mit den einzelnen Einstellungen zu spielen, bis das beste Resultat erreicht ist.
Automatische Farbkorrektur Wie der Name schon sagt, korrigiert dieser Filter die Farben im Bild automatisch. Sehen Sie sich das Resultat der einzelnen Clips an.
Abbildung 11.14: Die automatische Farbkorrektur
224
Videoeffekte Die automatische Farbkorrektur kann durchaus sinnvoll sein, denken Sie aber an Folgendes: Diese Korrektur versucht, das Bild farblich anzupassen, wenn von einer gewissen Farbe zu viele Anteile vorhanden sind oder ein Farbstich zu erkennen ist. Stellen Sie sich nun vor, Sie hätten einen Sonnenuntergang gefilmt und wenden diesen Effekt an. Der rote Sonnenuntergang hat für Pinnacle Studio HD viel zu viel Rotanteil und muss daher korrigiert werden, und zwar durch das Hinzufügen von Blauanteilen. Dann ist natürlich nichts mehr mit Sonnenuntergang. Sie sollten also darauf verzichten, jeden Clip standardmäßig der automatischen Farbkorrektur zu unterziehen. Die automatische Farbkorrektur kann unter Umständen die Helligkeit des Bildes verändern, dann müssen Sie den Schieberegler so verstellen, dass sie wieder stimmt.
Rauschunterdrückung Fügen Sie diesen Effekt hinzu, falls das Bild zu rauschen beginnt. Zum Bildrauschen kann es kommen, wenn ein Clip der automatischen Farbkorrektur unterzogen wurde oder von einem alten VHS-Band stammt. Der Effekt korrigiert nur die Stellen im Bild, bei denen das Rauschen einen gewissen Schwellenwert überschreitet. Verändern Sie also gegebenenfalls den Schwellenwert mit dem entsprechenden Schieberegler.
Abbildung 11.15: Die Rauschunterdrückung wird angewendet, wenn das Bild stark zu rauschen beginnt
Stabilisieren Die Stabilisieren-Funktion dient dazu, eine verwackelte Szene zu stabilisieren. Wenn Sie also Mühe hatten, beim Filmen die Kamera ruhig zu halten, können Sie mit dieser Funktion versuchen, das Wackeln zu korrigieren. Diese Funktion wurde seid der Version 14 komplett neu überarbeitet und bietet sehr gute Resultate. Bei diesem Effekt vergrößert Pinnacle Studio HD das Bild um ca. 20 % und sucht sich einen bestimmten Punkt im Bild, um die Aufnahme zu stabilisieren. Durch das Vergrößern des Bildes verliert es ein wenig an Qualität und Schärfe. Sie können das Resultat vergleichen, indem Sie einen Clip zweimal auf die Timeline legen und den Stabilisierungseffekt auf einen anwenden. Spielen Sie dann beide nacheinander ab, um das Resultat zu beurteilen.
225
Hinweis
Kapitel 11 – Die Video-Toolbox
Abbildung 11.16: Mit dem Videoeffekt Stabilisieren können verwackelte Szenen korrigiert werden
Der Effekt bietet zwar wenige Einstellungen, ist aber trotzdem sehr effizient. Grundsätzlich empfiehlt es sich, den Effekt mit den Standardeinstellungen auszuprobieren. Im Folgenden sind die Einstellungen kurz beschrieben:
Ränder Da ein Video zum Stabilisieren etwas vergrößert werden muss, entstehen unter Umständen Ränder, wenn es auf die eine oder andere Seite verschoben werden muss. Damit dies nicht geschieht, können Sie hier angeben, ob die Ränder ein wenig oder gar nicht sichtbar sein sollen und ob das Video grundsätzlich vergrößert werden soll oder nicht. Wenn das Video gar nicht vergrößert wird, dann sind die Ränder am meisten zu sehen.
Abbildung 11.17: Mit der Einstellung Kein Zoom sind am Rand des Videos schwarze Ränder sichtbar
In Abbildung 11.17 sehen Sie am oberen rechten Rand die schwarzen Balken, da das Video nach unten links korrigiert werden musste, damit es nicht mehr so wackelt. Die Qualität bleibt bei dieser Einstellung die beste, das Video wird sich aber im Vorschaufenster ständig bewegen. Damit dies nicht zu sehen ist, könnten Sie im Titeleditor einen schwarzen Rand rund ums Video legen, dann wären die Ränder wenigstens immer gleich groß.
226
Videoeffekte
Max. Auto-Zoom Mit dieser Einstellung kann angegeben werden, um wie viel Prozent ein Video maximal vergrößert werden darf. Je größer dieser Wert, umso schlechter die Bildqualität, dafür wird das Video umso mehr stabilisiert. Finden Sie also einen Mittelweg zwischen Bildqualität und stabilisiertem Video.
Geschwindigkeit Mit der Zeitlupen- und Zeitraffer-Funktion können Sie ein Video langsamer oder schneller laufen lassen.
Abbildung 11.18: Zeitlupen- und Zeitraffer-Funktion für das Verändern der Abspielgeschwindigkeit eines Videoclips
Mit dem Schieberegler Geschwindigkeit können Sie einen Clip langsamer oder schneller laufen lassen. Werte über 100 beschleunigen den Clip, er wird im Zeitraffer abgespielt. Werte unter 100 verzögern das Abspielen des Clips, er wird in Zeitlupe abgespielt. Hinweis
Wie genau ist Zeitlupe? Ein Videobild hat 25 Bilder pro Sekunde (PAL). Wie ist es möglich, dass Sie mit diesem Video einen Zeitlupen-Effekt erzielen können? Beispiel: Sie möchten einen Clip halb so schnell laufen lassen. Angenommen, der Clip dauert eine Sekunde. Wenn nun der Clip mit halber Geschwindigkeit abgespielt werden soll, so muss er letztlich 2 Sekunden dauern. Dazu bräuchten wir aber 50 Bilder. Pinnacle Studio HD geht nun folgendermaßen vor: Jedes einzelne Bild wird doppelt so lang angezeigt. Wenn jedes Bild verdoppelt wird, haben wir schlussendlich die gewünschten 50 Bilder. Was ist Zeitraffer? Zeitraffer ist das genaue Gegenteil von Zeitlupe und für ein Videoschnittprogramm viel einfacher zu realisieren, da im Prinzip nur Bilder ausgelassen werden müssen. So kann aus einer Sekunde mit 25 Bildern einfach jedes zweite Bild ausgelassen werden, um einen Zeitraffer-Effekt mit doppelter Geschwindigkeit zu erzeugen.
227
Kapitel 11 – Die Video-Toolbox Mit dem Setzen der Option Rückwärts können Sie einen Clip rückwärts laufen lassen. Dazu ist es nicht unbedingt notwendig, dass ein Clip langsamer oder schneller gemacht wird. Sie können beides aber jederzeit miteinander kombinieren. Achten Sie beim Abspielen auf das Audio, das ebenfalls verändert wurde. Wenn Sie das nicht wünschen, müssen Sie vor dem Anwenden des Effekts die Audiospur sperren.
Drehen Wählen Sie den Videoeffekt Drehen und geben Sie dann einfach an, um welchen Winkel das Video gedreht werden soll. Gleichzeitig können Sie auch die Größe des Videos anpassen.
Abbildung 11.19: Drehen und Größenanpassung eines Videos
Pan und Zoom Hiermit können Sie einen Clip, ähnlich wie bei der Bild-in-Bild-Funktion, skalieren und verschieben. Pan und Zoom wird oft bei Standbildern eingesetzt, die eigentlich zu groß für das Videobild sind. So können Sie zu einem Detail im Bild zoomen.
Abbildung 11.20: Die Funktion Pan und Zoom dient dazu, einen Clip zu skalieren und zu verschieben
Interessant dabei ist die kleine Option unten am Rand des Editors: Keyframes anwenden. Damit kann das Bild während des Abspielens im Film frei bewegt werden. Wenn Sie also wie oben beschrieben ein Detail aus einem großen Bild zeigen, können Sie den Bildausschnitt der Reihe nach zum nächsten Detail bewegen und so eine Geschichte mit bewegten Bildern erzählen. Hierfür sind allerdings ein paar Handgriffe notwendig, die im nächsten Abschnitt beschrieben werden.
228
Keyframe-Animation
Keyframe-Animation Hinweis
Ultimate & Ultimate Collection Diese Funktion ist nur in Pinnacle Studio HD Ultimate und Pinnacle Studio HD Ultimate Collection Version 15 verfügbar. Keyframes sind bestimmte Stellen im Clip, die zu einer bestimmten Zeit die Einstellungen speichern. Wenn Sie die Keyframe-Funktion aktivieren, besitzt der Clip am Anfang und am Schluss stets einen Keyframe. Verändern Sie nun die Parameter, z.B. den Zoom, werden sie lediglich an der Position des aktuellen Keyframes verändert. Wenn Sie beim ersten Keyframe des Clips den Zoom auf 50 % eingestellt haben und die Parameter beim zweiten Keyframe nicht verändern, dann wird beim Abspielen der Clip langsam aufgezoomt. Die Keyframes können bei fast allen Effekten angewendet werden, so lassen sich z.B. Farbverläufe erzeugen. Das Bild verändert sich dann nicht in der Größe und Position, sondern wechselt einfach die Farben. Versuchen Sie, die Keyframe-Funktion am folgenden Beispiel nachzuvollziehen: 1. Selektieren Sie einen Clip auf der Timeline. 2. Öffnen Sie die Videoeffekte-Bibliothek und weisen Sie dem Clip den Effekt Pan und Zoom zu. 3. Aktivieren Sie die Option Keyframes anwenden durch Setzen des Markierungshäkchens.
Abbildung 11.21: Dem Clip wird am Anfang und am Schluss je ein Keyframe zugeordnet
Dem Clip wurden zwei Nummern zugewiesen, die auf die beiden Keyframes hinweisen. Jeder Keyframe wird eindeutig nummeriert. Im unteren Bereich des Editors sind nun weitere Einstellungen sichtbar geworden, die dazu dienen, zu den verschiedenen Keyframes zu navigieren. Klicken Sie auf den Pfeil nach rechts bzw. links, um den Timeline-Scrubber auf die Keyframes zu setzen. Nun können Sie mit der Animation beginnen: 4. Setzen Sie den Timeline-Scrubber auf den ersten Keyframe. 5. Verändern Sie den Zoom auf einen Wert von beispielsweise –50. Das Bild wird halb so groß dargestellt.
229
Kapitel 11 – Die Video-Toolbox
Abbildung 11.22: Verändern Sie die Parameter bei jedem Keyframe, um eine Animation zu erstellen
6. Spielen Sie nun das Video ab. Der Clip wird gegen Ende wieder aufgezoomt, als wäre dies ein Zoom mit der Kamera. Dann können Sie beim Abspielen den Zoomwert beobachten, wie er gegen 0 gezählt wird. Das geschieht, weil zum Zeitpunkt des zweiten Keyframes keine Werte zugeordnet wurden. Sie könnten auch die Werte beim zweiten Keyframe verändern. Pinnacle Studio HD errechnet dann automatisch die Werte dazwischen.
Keyframe hinzufügen Sie können einem Clip weitere Keyframes hinzufügen, um die Bewegungen des Clips noch komplexer zu gestalten. Scrubben Sie in die Mitte des Clips und klicken Sie auf die Schaltfläche Hinzufügen, um einen weiteren Keyframe zu setzen.
Abbildung 11.23: Sie können einem Clip mehrere Keyframes hinzufügen, um noch komplexere Animationen zu erstellen
Wie bereits gesagt, Sie können die Werte bei jedem Keyframe verändern. Ein Abspielen des Clips zeigt Ihnen immer eine Vorschau, damit Sie nicht die Kontrolle verlieren.
Keyframe löschen Sie können einen Keyframe löschen, indem Sie ihn auswählen und dann auf Löschen klicken. Der erste und der letzte Keyframe können nicht gelöscht werden, da jede Bewegung beim ersten Keyframe beginnen und beim letzten enden muss. Wenn Sie auch diese entfernen möchten, weil Sie auf eine Animation verzichten wollen, dann entfernen Sie das Häkchen bei Keyframes.
230
Die Studio HD Ultimate RTFx-Bibliothek
Keyframe verschieben Klicken Sie auf einen der beiden kleinen Pfeile, die nach oben und unten zeigen, um den Keyframe nach rechts bzw. nach links zu verschieben.
Abbildung 11.24: Klicken Sie auf diese kleinen Pfeile, um einen Keyframe auf der Timeline zu verschieben
Werte zurücksetzen Wenn Sie die Parameter an einem Keyframe auf den Standardwert zurücksetzen möchten, navigieren Sie zu diesem und klicken auf Zurücksetzen.
Die Studio HD Ultimate RTFx-Bibliothek Nachfolgend werden einige Effekte der Effekte-Bibliothek in Pinnacle Studio HD Ultimate und Studio HD Ultimate Collection erläutert, wobei nicht alle eine ausführliche Beschreibung erfordern. Es ist empfehlenswert, in einem Versuchsprojekt mit den einzelnen Effekten zu spielen. Hinweis
Ultimate & Ultimate Collection Diese Funktion ist nur in Pinnacle Studio HD Ultimate und Pinnacle Studio HD Ultimate Collection Version 15 verfügbar.
HFX Filter HFX bzw. Hollywood FX ist ein weiteres Effekte-Paket, das in Pinnacle Studio HD integriert ist. Mit Hollywood FX können Clips durch dreidimensionale Effekte ergänzt werden. 1. Um den Editor zu öffnen, klicken Sie auf den Knopf HFX Filter bearbeiten.
Abbildung 11.25: HFX ist ein zusätzliches Programm von Pinnacle Studio HD, mit dem dreidimensionale Effekte erzielt werden können
Der Hollywood FX-Editor wird geöffnet.
231
Kapitel 11 – Die Video-Toolbox 2. Wählen Sie mit einem Doppelklick einen Effekt im unteren rechten Bereich aus. Links in der Liste erhalten Sie diverse Einstellungsmöglichkeiten, um den Effekt anzupassen. Weitere Hollywood FX-Effekte können gekauft und in Pinnacle Studio HD integriert werden. 3. Mit einem Klick auf OK können Sie die Änderungen übernehmen.
Abbildung 11.26: Hollywood FX-Editor
Alter Film Lassen Sie Ihren Film älter aussehen, indem Sie die Farben auf Schwarz und Weiß oder Sepia stellen und dem Film Kratzer hinzufügen. So können Sie den Eindruck erwecken, als wäre der Film vor vielen Jahren aufgenommen worden.
Abbildung 11.27: Dieser Effekt lässt das Video aussehen, als wäre es in der guten alten Zeit aufgenommen worden
232
Die Studio HD Ultimate RTFx-Bibliothek
Buntglas Mit dieser Funktion sieht das Bild so aus, als wäre es durch ein Kirchenfenster aufgenommen worden.
Abbildung 11.28: Buntglas-Videoeffekt
Mit den Schiebereglern Horizontal und Vertikal verändern Sie die Anzahl der Mosaikteile, der dritte vergrößert die Fugen dazwischen.
Prägung Dieser Effekt verleiht dem Bild eine Prägung; mit dem Schieberegler können Sie die Intensität verändern und anpassen.
Abbildung 11.29: Prägung im Videobild
Softener Ein Clip kann mit diesem Effekt verschwommen dargestellt werden. Es entsteht ein verträumter Eindruck.
Abbildung 11.30: Dieser Effekt lässt eine Landschaft verträumt aussehen
233
Kapitel 11 – Die Video-Toolbox
Weichzeichnen Mit dem Weichzeichner können Sie eine ähnliche Wirkung erreichen wie mit dem Softener, allerdings können Sie die Unschärfe auf einen Teilbereich des Bildes begrenzen, um diesen beispielsweise zu zensieren:
Abbildung 11.31: Dieser Effekt lässt einen Teilbereich des Bildes unscharf erscheinen
Sie können mit den Schiebereglern die Intensität der Unschärfe sowie die genaue Position im Bild bestimmen. Mit der Keyframe-Animation wäre es zudem möglich, den Unschärfebereich mit einem Objekt mitzubewegen.
2D Editor Die Bild-in-Bild-Funktion wurde bereits weiter oben beschrieben, im Effekte-Editor haben Sie überdies die Möglichkeit, das Bild mittels der Keyframes zu animieren. Aktivieren Sie dazu die Keyframes-Funktion.
Abbildung 11.32: Der Bild-in-Bild-Effekt stellt ein Video verkleinert dar
Mit diesem Effekt wäre es überdies möglich, das Video auf der ersten Videospur so stark zu verkleinern, dass schließlich zwei Videobilder nebeneinander dargestellt werden können. Der 2D Editor-Effekt bietet ähnliche Möglichkeiten wie der Bild-in-Bild-Effekt.
Bewegungsunschärfe Dieser Effekt fügt dem Bild Bewegungsunschärfe hinzu, so als hätte man die Verschlusszeit der Kamera zu klein gewählt.
234
Die Studio HD Ultimate RTFx-Bibliothek
Abbildung 11.33: Videoeffekt Bewegungsunschärfe
Blendenfleck Mit diesem Effekt wird der Eindruck erzeugt, als hätten Sie direkt in die Sonne gefilmt.
Abbildung 11.34: Blendenfleck-Videoeffekt
Verändern Sie im Editor den Typ des Glühens sowie Richtung und Größe des Blendenflecks.
Erdbeben Der Erdbeben-Effekt verwackelt das Video übermäßig. Dieser Effekt ist im Prinzip das Gegenteil vom Stabilisieren-Effekt.
Abbildung 11.35: Der Erdbeben-Effekt lässt ein Videoclip sehr verwackelt aussehen
Imitieren Sie damit ein Erdbeben oder erwecken Sie den Eindruck, als hätte jemand beim Filmen neben Ihnen mit einem Presslufthammer die Straße bearbeitet.
235
Kapitel 11 – Die Video-Toolbox
Lupe Vergrößern Sie einen Ausschnitt des Bildes, indem Sie die Lupe einsetzen. Sie können den Effekt mit den Keyframes auch über das Bild wandern lassen. Dieser Effekt eignet sich hervorragend für Sherlock-Holmes-Filme!
Abbildung 11.36: Der Lupeneffekt vergrößert einen Ausschnitt aus dem Bild
Wassertropfen Dieser Effekt erzeugt in dem Bild die gleiche Wirkung wie ein Stein, der in einen See geworfen wird.
Abbildung 11.37: Dem Videobild werden kreisförmige Wasserlinien hinzugefügt
Wasserwellen Dieser Effekt ist mit den Wassertropfen verwandt, nur verlaufen die Linien nicht kreisförmig, sondern gerade.
Abbildung 11.38: Fügt dem Video Wellen hinzu
236
Die Studio HD Ultimate RTFx-Bibliothek
Farbkorrektur Verwenden Sie die Farbkorrektur, um ein Bild nachträglich farblich zu verbessern oder zu verändern. Mit dem Farbkorrektur-Effekt erhalten Sie ein mächtiges Werkzeug, um die Farben im Video anzupassen. Sie können wahlweise die Rot-, Grün- und Blauwerte eines Clips verändern. Den drei Farben sind wiederum drei verschiedene Schieberegler zugeordnet: Gain, Gamma und Schwarz. Mit diesen drei Parametern können Sie die hellen, mittleren und dunklen Farbtöne einer jeden Farbe verändern. So können Sie in einem Bild die Farben unabhängig voneinander korrigieren.
Abbildung 11.39: Mit der Farbkorrektur können Sie nachträglich Farbfehler korrigieren
Achten Sie unbedingt auf Ihre Bildschirmeinstellungen, wenn Sie Farbkorrekturen vornehmen. Sind die Farben auf Ihrem Bildschirm falsch eingestellt, ist es kaum möglich, einen Videoclip farblich anzupassen. Machen Sie daher immer den Vergleich mit einem TV-Gerät, von dem Sie wissen, dass die Farben richtig dargestellt werden.
Invertieren Dieser Effekt lässt das Bild wie das Negativ eines Fotos aussehen. Sie können mit den drei Optionen Luma, Chroma-Blau und Chroma-Rot sieben verschiedene Umkehrungen erzielen, je nachdem, welche Sie miteinander kombinieren.
Abbildung 11.40: Mit Invertieren wird ein Clip wie ein Negativ dargestellt
Posterisieren Durch diesen Effekt werden die Farben bis auf Schwarz und Weiß verringert und farbähnliche Gegenden zu Flächen zusammengefügt.
237
Kapitel 11 – Die Video-Toolbox
Abbildung 11.41: Der Effekt Posterisieren
Schwarz und Weiß Bei diesem Effekt werden dem Bild die Farben entzogen, bis es nur noch schwarz-weiß dargestellt wird.
Abbildung 11.42: Ein zuvor farbiger Clip wird jetzt schwarz-weiß dargestellt
Weißabgleich Verwenden Sie diese Funktion, um einen nachträglichen Weißabgleich durchzuführen, falls die Farben im Video nicht echt dargestellt werden. Jeder Camcorder unterscheidet zwischen verschiedenen Farbtemperaturen. Der größte Unterschied ist zwischen Tages- und Kunstlicht. Helles Tageslicht schimmert bläulich und Kunstlicht meistens gelblich. Wenn nun die Videokamera falsch eingestellt ist oder Farben nicht korrigieren kann, wird im Video eine weiße Wand leider falsch dargestellt. Solche Fehler können Sie mit der Weißabgleich-Funktion nachkorrigieren. Klicken Sie mit der Pipette ins Vorschaufenster und wählen Sie einen Bereich aus, der eigentlich weiß dargestellt werden sollte. So kann Pinnacle Studio HD die Farben im Bild nachträglich anpassen.
Abbildung 11.43: Korrigieren Sie Farbfehler automatisch mit dieser Funktion
238
SmartMovie-Funktion
SmartMovie-Funktion Mit der SmartMovie-Funktion können Sie den Filmschnitt komplett Pinnacle Studio HD überlassen. Übergänge, Effekte usw. werden automatisch von Pinnacle Studio HD eingefügt, und der Film wird auf eine von Ihnen definierte Länge geschnitten. Sie müssen nur noch entscheiden, ob Ihnen das Resultat zusagt oder nicht. Am besten testen Sie die Funktion einmal mit einem Beispielvideo. Ein großer Vorteil der SmartMovie-Funktion ist das Abstimmen von Video und Musik bei einem Musikclip. Pinnacle Studio HD schneidet das Video synchron zum Takt der Musik, was normalerweise mit sehr viel Arbeit verbunden ist. So können Sie in kurzer Zeit taktgenaue Diashows und Musikvideos erstellen. Klicken Sie in der Video-Toolbox auf folgendes Symbol, um die SmartMovie-Funktion zu öffnen.
Abbildung 11.44: Über dieses Symbol gelangen Sie zur SmartMovie-Funktion
1. Erstellen Sie ein neues Projekt und fügen Sie alle zu schneidenden Clips in die Timeline ein. 2. Legen Sie einen Musikclip auf die Musikspur, am besten einen aus der ScorefitterBibliothek. 3. Ziehen Sie den Musikclip so lange, wie der Film schlussendlich sein soll. Beachten Sie, dass das Musikstück kürzer sein muss als die Clips auf der Timeline, da Pinnacle Studio HD sonst nichts herausschneiden kann. Die Timeline sollte jetzt etwa wie in folgender Abbildung aussehen.
Abbildung 11.45: Für die SmartMovie-Funktion muss die Timeline vorbereitet werden
4. Nun müssen Sie einige Einstellungen vornehmen, damit Pinnacle Studio HD weiß, wie der Film geschnitten werden soll. 5. Klicken Sie auf die Dropdown-Liste Musikvideo-Stil, um einen Filmstil zu wählen. In der Sprechblase erhalten Sie Details zu den einzelnen Varianten. 6. Wählen Sie mit der Option Zufällige Clipreihenfolge, ob Pinnacle Studio HD die Clips auf der Timeline mischen darf oder ob die Reihenfolge beibehalten werden soll.
239
Kapitel 11 – Die Video-Toolbox
Abbildung 11.46: SmartMovie-Einstellungen
7. Ergänzen Sie die Einträge unter Filmtitel und Nachspann, damit Pinnacle Studio HD diese Informationen hinzufügen kann. 8. Als Letztes können Sie die relative Lautstärke zwischen der Hintergrundmusik und dem Originalton wählen. Wenn gesprochene Sprache im Film zu hören sein soll, schieben Sie den Regler nach links. 9. Starten Sie den Vorgang mit einem Klick auf SmartMovie erstellen. Pinnacle Studio HD beginnt mit dem Bearbeiten des Films. Warten Sie, bis dieser Vorgang abgeschlossen ist.
Abbildung 11.47: Nach dem Fertigstellen des SmartMovies sieht die Timeline etwa so aus
10. Der fertig geschnittene Film kann nun begutachtet werden. Entscheiden Sie, ob Pinnacle Studio HD an Ihre Schnittqualitäten herangekommen ist oder nicht. Ein besseres Resultat kann erzielt werden, wenn alles, was im Film wackelt und unscharf ist, vorher getrimmt und herausgeschnitten wird. Pinnacle Studio HD kann diese Fehler nicht selbst erkennen und korrigieren.
240
12 Disc-Menü (Authoring) Wollen Sie Ihr fertiges Video auf eine DVD oder Blu-ray Disc brennen, dann können Sie mit dem Erstellen eines Disc-Menüs beginnen, nachdem Sie mit den Bearbeitungsschritten auf der Timeline fertig sind – ich empfehle Ihnen, den Film vorher komplett fertig zu bearbeiten. Es ist nicht unbedingt notwendig, für jeden Film ein Disc-Menü zu erstellen. Wenn Sie den Film zurück auf ein MiniDV-Band oder eine VHS-Kassette spielen möchten, ist ein Disc-Menü überflüssig. Sie können auch eine CD, DVD oder Blu-ray erstellen, die kein Menü enthält. Tipp
DVD Eine DVD (Digital Versatile Disc) ist nicht zu verwechseln mit einer CD (Compact Disc), obwohl die beiden Medien gleich aussehen und ähnlich funktionieren. Auf einer DVD können weitaus mehr Daten als auf einer CD gespeichert werden – bis zu 8,5 GByte auf einer Dual Layer DVD (also auf einer zweischichtigen DVD). Es gibt verschiedene Formate für DVDs, das ist aber für die heutigen DVD-Brenner kein Problem mehr, die meisten können alle Formate (viele sogar das obskure DVDRAM) brennen. Die verschiedenen Formate sind Standards der DVD-Rohlingshersteller und konnten sich nicht einheitlich auf dem Markt durchsetzen. Die Formate teilen sich auf in wiederbeschreibbare DVDs (Rewritable) und einmal beschreibbare DVDs. Für beide Varianten gibt es ein Plus- und ein Minus-Format (+ und –). Zudem unterscheiden sich die DVD-Rohlinge, die mit einem DVD-Brenner gebrannt werden können, von den gepressten DVDs (kommerziellen DVDs). Aus diesem Grund gibt es immer wieder Probleme beim Abspielen von selbst gebrannten DVDs auf einem DVD-Abspielgerät. Falls Sie Ihre selbst gebrannten DVDs nicht abspielen können, kann dies an Ihrem DVDAbspielgerät liegen, oder Sie müssen einen anderen Rohlingstyp ausprobieren. Erwerben Sie nur Marken-DVD-Rohlinge, dann können Sie, wenn Sie einen kompatiblen Typ gefunden haben, immer wieder auf den gleichen Typ zurückgreifen. Allerdings kann es auch vorkommen, dass Sie mit Markenrohlingen Probleme haben, während No-NameRohlinge sehr gut funktionieren. Die Vorteile einer DVD gegenüber einem Videoband sind folgende:
241
Kapitel 12 – Disc-Menü (Authoring) 쐽 klein und handlich 쐽 Kapitelwahl per Tastendruck, ohne Spulen 쐽 kein Verschleiß beim Abspielen des Mediums Wenn Sie eine DVD mit einem Menü erstellen, wird nach dem Starten der DVD meistens das Menü (je nachdem, wie Sie die DVD erstellt haben) in einer Endlosschleife so lange angezeigt, bis ein Menüpunkt ausgewählt wird. Durch Wählen eines Kapitels oder Menüpunkts wird die DVD innerhalb von Sekunden ab der gewählten Position wiedergegeben. Jeder DVD-Player besitzt eine Fernbedienung mit Tasten für das Navigieren im DVD-Menü. Auf eine DVD mit 4,7 GByte kann ein einstündiges Video in guter DVD-Qualität gebrannt werden. Falls der Film länger als eine Stunde dauert, muss das Video stärker komprimiert werden, damit alles auf die DVD passt. Das Komprimieren übernimmt Pinnacle Studio HD automatisch. Es gibt auch DVDs mit zwei Datenschichten, die 8,5 GByte Speicherplatz bieten. Solche Dual Layer DVDs können mit Pinnacle Studio HD erstellt werden. Video- und Audiodaten werden im MPEG-2-Format auf einer DVD gespeichert, in sogenannten VOB-Dateien. Diese können später in Pinnacle Studio HD wieder importiert, ausgepackt und bearbeitet werden. Allerdings handelt es sich dabei um komprimierte Video-DVD-Daten.
Blu-ray Blu-ray ist die Nachfolgedisc der DVD.
Abbildung 12.1: Logo der Blu-ray Disc
Im Gegensatz zu einer DVD haben auf einer Blu-ray Disc 25 GByte Daten Platz und auf einer doppelschichtigen Blu-ray 50 GByte. Dieser große Speicherplatz bietet den Vorteil, dass man Videos in besserer Qualität auf die Scheibe bringen kann. Blu-ray unterstützt ebenfalls das High-Definition-Format. Für das Lesen und Beschreiben einer Blu-ray wird allerdings ein Blu-ray-Brenner benötigt. Auf einer einschichtigen Blu-ray Disc mit 25 GByte Speicherplatz können ca. 2 Stunden High Definition in nahezu Originalqualität gespeichert werden. Mit Pinnacle Studio HD Ultimate und Studio HD Ultimate Collection haben Sie die Möglichkeit, Disc-Menüs für CDs, DVDs und Blu-ray Discs zu gestalten, wie Sie sie von kommerziellen Filmen kennen. Pinnacle Studio HD unterstützt nur CD- und DVD-Menüs. Es gibt zwei Arten von Disc-Menüs. Sie können damit einen Film in verschiedene Kapitel aufteilen oder Sie verwenden sie, wenn Sie mehrere Filme auf eine Disc brennen wollen. Selbstverständlich können Sie auch beide Varianten miteinander kombinieren. Egal, ob Sie am Schluss eine CD, DVD oder Blu-ray erstellen bzw. brennen, die Vorgehensweise ist die gleiche.
242
Erstellen eines Disc-Menüs Sie können ein Disc-Menü jederzeit einem Film hinzufügen, empfehlenswert ist das aber erst, wenn der Film komplett fertig geschnitten ist. Das Disc-Menü sollte also eigentlich erst erzeugt werden, bevor der Film auf eine Disc gebrannt wird.
Erstellen eines Disc-Menüs Sie haben grundsätzlich zwei Möglichkeiten, ein Disc-Menü zu erstellen. Entweder Sie nehmen eine Menüvorlage aus dem Album oder Sie erstellen ein Menü von Grund auf neu. Sie können allerdings auch ein bestehendes Menü anpassen und verändern. Ein Disc-Menü wird in der Regel an den Anfang eines Films gelegt. Das muss aber nicht unbedingt sein, Disc-Menüs können auch irgendwo in den Film integriert werden. Sobald der Film beim Abspielen bei einem Menü angelangt ist, wird dieses so lange angezeigt, bis der Betrachter der Disc einen Punkt aus dem Menü ausgewählt hat.
Disc-Menü mit einer Vorlage Wechseln Sie im Album auf der Registerkarte Bearbeiten auf die DVD-Vorlagen mit einem Klick auf folgendes Symbol:
Abbildung 12.2: Dieses Register öffnet die DVD-Menü-Vorlagen
Die DVD-Menü-Vorlagen werden ins Album geladen und angezeigt. Die Darstellung des DVD-Menüs kann auf zwei Arten erfolgen: mit einem animierten oder einem statischen Hintergrund. Die Menüs können an dem kleinen Symbol unten rechts unterschieden werden.
Abbildung 12.3: Die Disc-Menü-Vorlagen werden ins Album geladen und können direkt in den Film integriert werden
Menüs mit einem animierten Hintergrund spielen im Bildschirmhintergrund des Menüs einen Videoclip ab, während die Kapitel im Vordergrund angezeigt werden. Ein DiscMenü wird nach dem Einlegen der Disc so lange abgespielt, bis der Betrachter einen Menüpunkt auswählt. Für das Erstellen eines Menüs im Film gehen Sie wie folgt vor:
243
Kapitel 12 – Disc-Menü (Authoring) 1. Ziehen Sie per Drag&Drop eines der Menüs aus dem Album an den Anfang des Films auf der Timeline. Nach dem Einfügen eines Menüs erscheint folgendes Dialogfenster:
Abbildung 12.4: Nach dem Hinzufügen eines DVD-Menüs können Sie entscheiden, ob Pinnacle Studio HD automatisch Kapitel anlegen soll
2. Pinnacle Studio HD will Ihnen Arbeit abnehmen und fragt Sie, ob die Kapitel automatisch erzeugt werden sollen. Die Kapitellänge können Sie dabei selbst wählen. Allerdings ist es sinnvoller, die Kapitel im Film nach anderen Kriterien als der Zeit zu setzen. In unserem Beispiel werden die Kapitel manuell angelegt, deshalb wählen Sie Nein, ich möchte die Kapitel manuell erstellen. 3. Die Option Nach Wiedergabe eines Kapitels automatisch zum Menü zurückkehren soll dann gewählt werden, wenn die Timeline verschiedene Filme enthält. So wird nach jedem gespielten Film wieder ins Menü zurückgekehrt. 4. Falls das Dialogfenster Menü zum Film hinzufügen nicht mehr erscheinen soll, wählen Sie die Option Frage bitte nicht mehr stellen. 5. Schließen Sie das Fenster mit einem Klick auf OK. Das DVD-Authoring-Fenster wird geöffnet.
Abbildung 12.5: Im Disc-Editor können nun alle Verknüpfungen und Einstellungen vorgenommen werden
Menü-Typ Wählen Sie die Option Autom. Szenenindex, falls die Kapitel auf der Timeline nacheinander, also sortiert, eingefügt werden sollen. Wählen Sie die Option Manuell, wenn die Reihenfolge auf der Timeline beliebig sein kann. Falls Sie Manuell gewählt haben, können Sie mit einem Klick auf die Option Autom. Szenenindex die Reihenfolge von Pinnacle Studio HD sortieren lassen.
244
Erstellen eines Disc-Menüs
Kapitel erstellen Das erste Kapitel eines Films sollte auch der Anfang des Films sein. Um ein erstes Kapitel zu erstellen, gehen Sie wie folgt vor: 1. Scrubben Sie auf der Timeline an die Stelle, an der das Kapitel starten soll. Um den Anfang eines Kapitels an den Anfang eines Clips zu setzen, klicken Sie den Clip mit der Maus an. Der Timeline Scrubber wird automatisch an den Anfang des angewählten Clips gesetzt. 2. Klicken Sie auf folgendes Symbol, um das Kapitel zu setzen, oder drücken Sie (C) auf Ihrer Tastatur.
Abbildung 12.6: Mit diesem Knopf erstellen Sie ein Kapitel auf der Timeline
Über der ersten Videospur erscheint eine weitere Spur, sobald ein Menü eingefügt wurde. Auf dieser sind das Disc-Menü und die Kapitelverknüpfungen zu sehen. Nach dem Einfügen des ersten Menüs ist die Bezeichnung C1 zu sehen, was für Kapitel 1 steht. Das erste Kapitel ist nun erstellt, zu erkennen an C1 auf der Timeline.
Abbildung 12.7: Menü- und Kapitelspur
Kapitel per Drag&Drop Sie können ein Kapitel auch auf andere Weise setzen: Ziehen Sie aus dem Menü eine Miniaturschaltfläche an die Stelle auf der Timeline, an die die Verknüpfung gesetzt werden soll.
Abbildung 12.8: Ein Kapitel kann auch per Drag&Drop erstellt werden
Sobald die Maustaste losgelassen wird, wird das Kapitel gesetzt. Im Disc-Vorschaufenster ist bei Kapitel 1 das erste Bild des Kapitels eingetragen worden. Diese Schaltflächen nennt man Miniaturschaltflächen, da sie eine kurze Vorschau des Szenenanfangs anzeigen. Pinnacle Studio HD übernimmt immer das erste Bild des
245
Kapitel 12 – Disc-Menü (Authoring) Kapitels und fügt es in das Menü ein. Sie können dieses Bild im Nachhinein anpassen, falls es Ihnen nicht gefällt. Scrubben Sie dazu auf der Timeline an eine andere Position und klicken Sie danach auf das Symbol neben Miniaturen.
Abbildung 12.9: Mit diesem Knopf können Sie das Vorschaubild in der Miniaturschaltfläche ändern
Die Miniatur zu ändern ist vor allem dann sinnvoll, wenn der Film am Anfang aus einem schwarzen Bildschirm eingeblendet wird oder Ihnen das erste Bild der Szene als Miniaturbild nicht gefällt.
Weitere Kapitel Fügen Sie ein weiteres Kapitel ein, indem Sie zuerst die nächste Schaltfläche des DVDMenüs anwählen und dann wie oben beschrieben ein weiteres Kapitel hinzufügen. Sie können auch mit den folgenden Pfeilsymbolen zwischen den verschiedenen Miniaturschaltflächen hin und her wechseln. Abbildung 12.10: Wechseln Sie jeweils vor dem Hinzufügen eines Menüs die entsprechende Miniaturschaltfläche aus
Fügen Sie nun auf der Timeline so viele Kapitel ein, wie Sie benötigen. Im gewählten Menü sind vier Miniaturen zu sehen. Sie können allerdings mehr als vier Schaltflächen im gleichen Menü erzeugen, indem Sie dem Menü eine weitere Seite hinzufügen.
Abbildung 12.11: Mit Nächste Seite anzeigen können weitere Seiten in das Menü hinzugefügt werden
Um weitere vier leere Schaltflächen zu erzeugen, klicken Sie auf den Pfeil unter Nächste Seite anzeigen. Sie können so viele Seiten hinzufügen, wie Sie möchten, allerdings ist es für den Betrachter sehr mühsam, wenn zu viele Seiten im Menü sind, da die Seiten mit der Fernbedienung gewechselt werden müssen.
Kapitel umbenennen Sie können jedem Kapitel einen Namen geben. Wählen Sie dazu die entsprechende Miniaturschaltfläche aus und ändern Sie die Bezeichnung im Textfeld.
Abbildung 12.12: Geben Sie hier einen Namen für das Kapitel ein
246
Erstellen eines Disc-Menüs Das Nummernzeichen (#) steht für die automatische Nummerierung der Kapitelnummern und wird im Menü durch eine Zahl ersetzt. Falls Sie das wünschen, geben Sie am Schluss des Textes das Zeichen wieder ein.
Rücksprung Um nach einem bestimmten Kapitel einen Rücksprung zurück ins Menü zu erzeugen, scrubben Sie mit der Maus an eine beliebige Stelle innerhalb des Kapitels und klicken auf den Knopf Zurück zum Menü. Am Ende des Kapitels wird ein Rücksprung erzeugt: M1. Wenn die Disc beim Abspielen zu einem Rücksprung kommt, kehrt sie zurück ins Menü.
Abbildung 12.13: Am Ende des Kapitels kann ein Rücksprung in das Menü eingefügt werden
Kapitel löschen Löschen Sie eine Kapitelverknüpfung, indem Sie mit der rechten Maustaste auf das zu löschende Kapitel klicken und aus der Menüliste den Eintrag Löschen wählen. Ebenso können Sie auch Rücksprünge löschen.
Abbildung 12.14: Löschen Sie eine Kapitelverknüpfung durch einen Klick mit der rechten Maustaste
Eine andere Variante, ein Kapitel zu löschen, funktioniert wie folgt: Wählen Sie das zu löschende Kapitel aus und klicken Sie auf das Symbol Aktuelles Kapitel löschen (V) oder drücken Sie (V) auf Ihrer Tastatur.
Abbildung 12.15: Mit diesem Symbol können Sie eine Kapitelverknüpfung löschen
So, wie der Hintergrund des Menüs animiert werden kann, können Sie auch die Filme in den Miniaturschaltflächen animieren. Wählen Sie dazu die Option Film-Miniaturen.
247
Kapitel 12 – Disc-Menü (Authoring)
Abbildung 12.16: Die Miniaturschaltflächen erhalten einen bewegten Clip
Wie das genau aussieht, werden Sie später in der DVD-Menü-Vorschau sehen.
Weitere Einstellungen Navigieren Sie mit den Pfeilen zwischen den verschiedenen Seiten.
Abbildung 12.17: Wechseln Sie zwischen den verschiedenen Seiten hin und her
Wählen Sie die Option C1, um die Kapitelnummern im Menü anzeigen zu lassen. Diese Anzeige dient lediglich der Übersicht und ist später auf der DVD nicht zu sehen.
Abbildung 12.18: Mit C1 können die Kapitelnummern im Menü angezeigt werden
Um das Menü individuell anzupassen, klicken Sie auf die Schaltfläche Menü bearbeiten.
Abbildung 12.19: Den Menü-Editor öffnen
Der Menü-Editor wird im nächsten Abschnitt ausführlich erklärt.
248
Menüs individuell anpassen
Menüs individuell anpassen Um ein Menü individuell anzupassen und zu gestalten, klicken Sie im Disc-Editor auf Menü bearbeiten. Der Titelgenerator wird geöffnet, darin werden auch Disc-Menüs bearbeitet. Nachfolgend sind lediglich die Funktionen beschrieben, die für ein Disc-Menü relevant sind. Die allgemeinen Funktionen des Titelgenerators wurden bereits in Kapitel 7 „Titel“ beschrieben. Wenn Sie ein Vorlagen-Menü komplett neu gestalten möchten, löschen Sie alle Elemente aus dem Titelgenerator heraus und bauen das Menü inklusive Layout von Neuem auf. Im Beispiel werden alle bereits bestehenden Schaltflächen gelöscht. Drücken Sie dazu (Strg)+(A) und dann (Entf) oder wählen Sie aus dem Menü Bearbeiten den Eintrag Alles auswählen und löschen Sie die Elemente mit (Entf).
Miniaturschaltflächen erstellen 1. Wechseln Sie im Titel-Editor mit einem Klick auf folgendes Symbol in die Bibliothek der Schaltflächen:
Abbildung 12.20: Wechseln Sie mit einem Klick in die Bibliothek der Schaltflächen
Eine Liste mit verschiedenen Vorlagen wird geöffnet. 2. Wählen Sie eine der Schaltflächen und übernehmen Sie sie mit Drag&Drop ins Menü. 3. Für jedes Kapitel im Film ziehen Sie eine neue Schaltfläche hinzu. Ebenso können Sie Text, Bilder usw. hinzufügen, bis das Menü Ihren Vorstellungen entspricht. Sie können auch eine Schaltfläche erstellen und mit einem Textfeld verketten. Kopieren Sie diese Schaltfläche dann nach Belieben, damit Sie nicht jede Schaltfläche neu erstellen müssen. Obwohl die Elemente verkettet sind, lässt sich der Text einer jeden Schaltfläche im Nachhinein individuell korrigieren. 4. Sie können die Größe einer Schaltfläche auf die gleiche Weise verändern, wie Sie das bei Fotos und Text gemacht haben.
249
Kapitel 12 – Disc-Menü (Authoring)
Abbildung 12.21: Fügen Sie so viele Schaltflächen ein, wie Sie brauchen (und Platz haben)
Layout einer Schaltfläche verändern Sie können das Aussehen einer Schaltfläche den eigenen Wünschen anpassen. Es gibt für jede Schaltfläche drei Zustände: normal, aktiviert und ausgewählt. Die verschiedenen Zustände werden durch verschiedene Farben gekennzeichnet, damit der Betrachter Ihrer DVD immer weiß, welche Schaltfläche aktuell angewählt ist. Andernfalls wäre er orientierungslos.
Abbildung 12.22: Ändern Sie das Aussehen der Schaltflächen, um dem Betrachter eine möglichst übersichtliche Navigation zu bieten
Highlight-Stil: Wählen Sie hier aus, wie eine Schaltfläche auszusehen hat, wenn sie angewählt wird. Die mittlere Option, Hervorhebung Schaltfläche, passt sich der Form der Schaltfläche an, das Viereck links zeichnet ein Viereck und der Strich rechts unterstreicht die Schaltfläche. Den Unterschied sehen Sie am besten, wenn Sie eine runde Schaltfläche ins Menü integrieren:
Abbildung 12.23: Hier wurde der Highlight-Stil „Hervorhebung Rechteckfläche“ gewählt. Pinnacle Studio HD zeichnet ein Viereck um das Objekt
250
Menüs individuell anpassen
Abbildung 12.24: Hier wurde der Highlight-Stil „Hervorhebung Schaltfläche“ gewählt. Pinnacle Studio HD zeichnet um das Objekt herum eine Kontur
Abbildung 12.25: Hier wurde der Highlight-Stil „Hervorhebung Unterstreichung“ gewählt. Pinnacle Studio HD zeichnet einen Strich unter das Objekt
Unter Aktiviert und Ausgewählt können Sie definieren, welche Farbe die Kontur der Schaltflächen bekommen soll, wenn diese aktiviert oder angewählt sind. Klicken Sie auf das entsprechende farbige Viereck, um die Farbe anzupassen. In einem Disc-Menü können verschiedene Arten von Schaltflächen benutzt werden. Sie haben bis jetzt die Miniaturschaltfläche kennengelernt, die Ihnen ein Miniaturbild aus der Timeline anzeigt.
Schaltflächen-Varianten Normale Schaltflächen Unter einer normalen Schaltfläche wird eine ganz normale Verknüpfung verstanden, die keine Miniatur darstellt. Somit kann ein normaler Text oder ein Bild zu einer Schaltfläche werden. 1. Schreiben Sie einen Text und wählen Sie diesen aus. 2. Wählen Sie dann aus der Dropdown-Liste den Eintrag Normal aus, um aus dem Text eine normale Verknüpfung zu erstellen. Das funktioniert auch mit anderen Verknüpfungen aus der Bibliothek oder einem eingefügten Standbild. Dieser Text kann nun ebenfalls als Schaltfläche benutzt und mit einem Kapitel verknüpft werden.
Abbildung 12.26: Sie können aus einem beliebigen Text oder Bild eine Schaltfläche für Menüs erstellen
251
Kapitel 12 – Disc-Menü (Authoring)
Vorherige und Nächste Vorherige und Nächste beziehen sich auf die verschiedenen Seiten eines Disc-Menüs. Wenn Sie also mehrere Seiten in einem Disc-Menü erzeugen möchten, so müssen Sie jeweils einen Nächsten- und Vorherigen-Knopf in das Menü integrieren. Sie können nun wie oben beschrieben einen beliebigen Text oder ein Bild zu einer dieser Schaltflächen machen.
Abbildung 12.27: Nächste und Vorige wird für mehrere Seiten verwendet
Root-Schaltfläche Diese Schaltflächen werden benutzt, wenn auf der Timeline mehrere Disc-Menüs eingesetzt sind. Mit einer Root-Schaltfläche können Sie mit einem Tastendruck wieder in das Hauptmenü navigieren, das ist das erste auf der Timeline.
Bewegter Hintergrund Wie Sie bereits erfahren haben, kann der Hintergrund eines Disc-Menüs mit einem Videoclip animiert werden. Sie können auch eine Szene Ihres Films als Hintergrund wählen. Hierzu müssen Sie den Hintergrund des Disc-Menüs transparent machen. Wechseln Sie auf das Hintergründe-Symbol und wählen Sie Hintergrund ist Transparent, falls diese Option nicht schon eingestellt ist.
Abbildung 12.28: Für einen animierten Hintergrund müssen Sie diesen durch einen Klick auf das Schachbrettsymbol transparent machen
Schließen Sie nun den Disc-Menü-Editor mit einem Klick auf OK unten rechts.
Filmsequenz als Hintergrund darstellen Ein Disc-Menü kann wie ein Titelclip auf der Timeline verlängert und verkürzt werden. Ein Disc-Menü wird beim Abspielen so lange dargestellt, bis der Betrachter ein Kapitel wählt. Wenn nun im Hintergrund eine Videosequenz zu sehen sein soll, muss das Menü ebenfalls die gleiche Länge haben. Verlängern Sie das Disc-Menü auf der Timeline und fügen Sie dann einen Videoclip aus dem Album in die zweite Videospur ein; wenn diese nicht zu sehen ist, legen Sie den Clip auf die Titelspur. Trimmen Sie gegebenenfalls den eingefügten Videoclip und verkürzen bzw. verlängern Sie das Menü auf die gleiche Länge.
252
Hintergrundmusik einfügen
Abbildung 12.29: Das animierte Video wird auf die zweite Videospur gelegt
Hintergrundmusik einfügen Sie können auf den Audiospuren auch Musik als Hintergrund abspielen lassen, egal ob das Menü animiert ist oder nicht. Fügen Sie dazu einfach eine Musik in eine der beiden Musikspuren ein und passen Sie die Lautstärke an. Achten Sie darauf, dass beides, Musik und Video, die gleiche Länge wie das Menü aufweist, da sonst beim Abspielen Lücken entstehen. Das Menü wird beim Abspielen immer wiederholt, so auch die Musik. Achten Sie darauf, dass die Musik und das Menü nicht zu kurz sind und die Musik einen Anfang und einen Schluss hat. Sonst tönt es komisch, und es entstehen unschöne Sprünge.
Disc-Menü-Vorschau Bevor eine Disc erstellt wird, sollten Sie die Verknüpfungen und Rücksprünge des erstellten Menüs testen, um sicherzugehen, dass alles richtig gemacht wurde. Wechseln Sie dazu im Vorschaufenster mit einem Klick auf folgendes Symbol in die DVD-Menü-Vorschau:
Abbildung 12.30: Mit einem Klick auf dieses Symbol in die DVD-Menü-Vorschau wechseln
Die Fernsteuerungen von Disc-Abspielgeräten verfügen alle über einen Satz von gleichen Funktionen. Es sind dies in jedem Fall ein Knopf für Start, Menü, nach oben, nach unten, nach links und nach rechts. Auch der Disc-Abspielmodus entspricht dieser Konvention, sodass realistisch getestet werden kann. Es stehen Knöpfe wie bei einer Fernbedienung zur Verfügung.
253
Kapitel 12 – Disc-Menü (Authoring)
Abbildung 12.31: Das Vorschaufenster wechselt in den DVD-VorschauModus
Sie können nun mit den vier Navigationstasten von einer Schaltfläche zur nächsten wechseln und den mittleren Knopf anklicken, um das Kapitel anzeigen, also starten zu lassen. Zusätzlich stehen weitere vier Knöpfe zur Verfügung: Knopf
Funktion
Oben links
zurück ins Hauptmenü
Oben rechts
zurück ins letzte Menü
Unten links
zum vorherigen Kapitel
Unten rechts
zum nächsten Kapitel
Tabelle 12.1: Disc-Navigation
Prüfen Sie nun die Verknüpfung der Kapitel, indem Sie die Navigation mit den Tasten testen und den Film laufen lassen. Erst wenn alle Verknüpfungen richtig funktionieren, sollten Sie die DVD brennen.
Mehrere Menüs miteinander verknüpfen Sie haben die Möglichkeit, in einem Film mehrere Disc-Menüs zu integrieren und miteinander zu verknüpfen. Das ermöglicht eine flexiblere Organisation von vielen kurzen Filmen oder Kapiteln. So können Sie z.B. mehrere Filme oder Diashows in Kapitel unterteilen. Legen Sie das zweite Menü an den Anfang eines weiteren Films und setzen Sie Kapitel und Verknüpfungen, wie es weiter oben beschrieben wurde.
Abbildung 12.32: Auf dieser Timeline wurden zwei Menüs verwendet. Verknüpfen Sie diese wie Clips
254
Menüs extern speichern Menüs können untereinander genauso wie Clips verknüpft werden. Achten Sie aber darauf, dass Sie aus einem Menü wieder herausnavigieren können. Wenn Sie also zwei Disc-Menüs auf der Timeline haben, so sollte das erste Menü eine Verknüpfung zum zweiten und das zweite Menü eine Verknüpfung zum ersten haben, damit wieder zurücknavigiert werden kann. Diese Verknüpfungen sind nicht zwingend notwendig, Sie sollten aber immer den Betrachter vor Augen haben, der die Disc anschaut. Für ihn sollten die Verknüpfungen so logisch und einfach wie möglich erstellt werden.
Menüs extern speichern Sie können Disc-Menüs speichern, um sie in einem anderen Projekt zu verwenden oder als Vorlage zu speichern. Öffnen Sie dazu den Menü-Editor und wählen Sie Datei und dann Menü speichern. Falls Sie ein bestehendes Menü öffnen möchten, wählen Sie Datei und dann Menü öffnen.
Menü neu erstellen Falls Sie keine Vorlage für Ihr Disc-Menü verwenden möchten, so können Sie es auch komplett selbst gestalten. Ebenso ist es möglich, eine Vorlage den eigenen Wünschen anzupassen. Um ein neues Menü zu erzeugen, gehen Sie wie folgt vor: 1. Öffnen Sie die Video-Toolbox und wählen Sie das Symbol Disc-Menü erstellen bzw. bearbeiten.
Abbildung 12.33: Das Symbol Disc-Menü erstellen bzw. bearbeiten
2. Scrubben Sie auf der Timeline an die gewünschte Stelle, an der das Menü eingefügt werden soll.
Abbildung 12.34: Erstellen Sie ein Disc-Menü von Grund auf neu
3. Klicken Sie auf Menü erstellen.
255
Kapitel 12 – Disc-Menü (Authoring)
Abbildung 12.35: Pinnacle Studio HD fragt Sie noch einmal, ob Sie wirklich ein Menü neu erstellen oder ein VorlagenMenü aus dem Album öffnen möchten
4. Setzen Sie die Option Menü-Editor öffnen und wählen Sie OK. Der Menü-Editor wird geladen. Wie Sie sehen werden, öffnet sich der Ihnen bekannte Titelgenerator.
256
13 Film erstellen
Sobald Sie mit dem Bearbeiten eines Films fertig sind, können Sie ihn auf verschiedene Weise exportieren, also ausgeben lassen. Zum Beispiel können Sie Ihr fertiges Video auf CD, DVD oder Blu-ray Disc brennen, Ihren Film als Datei auf Ihrem PC speichern oder diesen direkt ins Internet laden. Sie können das fertige Videomaterial aber auch auf eine VHS-Kassette oder ein MiniDV-Band zurückspielen. Genauso können Sie den gleichen Film in verschiedene Videoformate exportieren, solange alle Rohdaten des Films und das Projekt auf der Festplatte bleiben. Sinnvoll ist es, einen Film immer in voller Qualität zu exportieren. Diesen können Sie dann von Ihrem PC abspielen oder präsentieren. Falls Sie Ihre Videoaufnahmen mit einem digitalen Camcorder erstellt haben, ist es empfehlenswert, den ganzen Film einmal auf ein neues digitales Band zurückzuspielen. Bei digitaler Übertragung haben Sie so gut wie keinen Qualitätsverlust und können den Film jederzeit wieder einlesen und in ein anderes Format umwandeln bzw. exportieren. Wie Sie sehen werden, sind Filme auf einer DVD sehr stark komprimiert und entsprechen nicht mehr der Originalqualität. Eine DVD eignet sich aus diesen Gründen kaum für das Erstellen von unkomprimierten Sicherheitskopien, besser wäre schon, eine Blu-ray Disc zu brennen, allerdings nur, wenn das Videoprojekt im High Definition Format vorliegt. Um mit dem Exportieren oder Erstellen des Films zu beginnen, wechseln Sie zum Schritt 3 Film erstellen.
Abbildung 13.1: Film erstellen-Modus für das Exportieren des Films
257
Kapitel 13 – Film erstellen
Ausgabe auf CD, DVD oder Blu-ray Disc Diese Option bietet Ihnen die Möglichkeit, Ihren Film auf CD, DVD oder Blu-ray Disc auszugeben. Bei diesem Vorgang wird der Film zuerst berechnet, in das entsprechende Format umgewandelt und dann direkt auf die Disc gebrannt. Wie Sie bereits beim Aufnehmen von Video in Kapitel 2 „Importieren“ gesehen haben, benötigt eine Stunde Video bis ca. 13 GByte auf der Festplatte. Eine normale CD speichert ca. 700 MByte (0,7 GByte), eine DVD 4,7 GByte (bzw. 8,5 GByte für eine doppelschichtige), eine Blu-ray Disc 25 GByte (bzw. 50 GByte für eine doppelschichtige). Angenommen, ein Film dauert eine Stunde. Wie ist es nun möglich, dass ein solcher Film, der bis 13 GByte beanspruchen würde, auf einer dieser Discs Platz hat? Das geht, wenn die Daten sehr stark komprimiert werden.
MPEG-Kompression Hinweis
Um ein Video zu komprimieren, müssen die benötigten Videodaten reduziert werden. Das kann erreicht werden, indem Pinnacle Studio HD 쐽 die Anzahl Bilder pro Sekunde verringert, 쐽 das Videobild verkleinert (Pixelgröße kleiner darstellt), 쐽 gewisse Farb- und Helligkeitsinformationen weglässt. Alle diese Veränderungen würden zu einem sehr schlechten Resultat führen – darum wurde der Kompressionsstandard MPEG-2 entwickelt. Beim Umrechnen in das MPEG-2-Format werden redundante Bildinformationen weggelassen, ohne die Bildrate und Bildgröße zu verändern. Der Kompressor analysiert das erste Bild des Videos und speichert lediglich die Veränderungen zum nächsten Bild. Danach werden die Veränderungen vom zweiten zum dritten Bild gespeichert usw. Nach 12 Bildern speichert der Kompressor ein neues, volles Bild und beginnt von vorne. Wenn ein Standbild in MPEG-2 umgerechnet wird, müssen sehr viel weniger Daten gespeichert werden, als wenn im Film eine detailreiche Aufnahme gezoomt wird. Der MPEG-2-Kompressor unterscheidet zwischen variabler und konstanter Bitrate. 쐽 Variable Bitrate: Die Kompression wird dem Inhalt des Videos angepasst. Bei Standbildern und wenigen Bildinformationen werden weniger Daten, bei vielen Bildinformationen mehr Daten gespeichert. Sie können also vor dem Komprimieren nicht sicher sagen, wie groß die MPEG-2-Dateien werden. 쐽 Konstante Bitrate: Die Kompression verläuft vom Anfang bis zum Ende des Films mit der gleichen Datenrate, egal ob viele oder wenige Bildinformationen gespeichert werden müssen. Es empfiehlt sich also, die variable Bitrate zu wählen, da damit eine bessere Qualität erzeugt werden kann. Bevor Sie mit dem Brennen fortfahren, sollten Sie sich überlegen, ob eine CD oder DVD erzeugt werden soll. Das Erstellen einer Blu-ray Disc macht nur dann Sinn, wenn Sie ein High Definition Video bearbeitet haben und dieses in der vollen Auflösung brennen möchten.
258
Ausgabe auf CD, DVD oder Blu-ray Disc Auf eine CD kann Video im Format MPEG-1 und MPEG-2 für jeweils eine Video-CD (VCD) oder Supervideo-CD (S-VCD) gebrannt werden. Denken Sie daran, dass nicht alle DVD-Abspielgeräte Video- und Supervideo-CDs lesen und abspielen können. Da eine CD lediglich ca. 700 MByte fasst, ist die Qualität gegenüber einer DVD auch wesentlich schlechter. Nachfolgende Tabelle zeigt Ihnen die Unterschiede der verschiedenen Disctypen, die mit Pinnacle Studio HD erstellt werden können. VideoCD
S-Video- DVD CD
AVCHD Blu-ray
Speichermedium
CD
CD
DVD
Speichergröße
ca. ca. 4,7 oder 4,7 oder 25 oder 700 MByte 700 MByte 8,5 GByte 8,5 GByte 50 GByte
Kompression
MPEG-1
MPEG-2
MPEG-2
AVCHD MPEG-4
AVCHDM- HD-DVD PEG-4
Spiellänge in bester Qualität
bis ca. 60 Min.
bis ca. 30 Min.
bis ca. 60 bzw. 120 Min.
bis ca. 40 bzw. 80 Min.
bis ca. ca. 20 bzw. 3 Stunden 40 Min.
DVD
HD-DVD
BD (Blu-ray DVD Disc) 4,7 oder 8,5 GByte
Tabelle 13.1: Vergleich der Formate Video-CD, Supervideo-CD, DVD, HD-DVD, AVCHD und Blu-ray Disc, die mit Studio HD erstellt werden können
Auf eine DVD mit 4,7 GByte Speicherplatz können auch mehr als 60 Minuten aufgenommen werden, allerdings muss dann das Video stärker komprimiert werden. Für eine möglichst hohe Qualität sollte gemäß der Tabelle für Standard Definition Videos das DVD-Format gewählt werden und die Filme sollten nicht länger als 60 Minuten sein. Um eine Disc zu brennen, gehen Sie wie folgt vor: 1. Legen Sie eine leere Disc (CD, DVD oder Blu-ray Disc) in Ihren Brenner. 2. Wählen Sie in Pinnacle Studio HD die Registerkarte Film erstellen. 3. Wählen Sie unter Disc-Typ, welche Art von Disc Sie brennen möchten, z.B. VCD für Video-CD, SVCD für Supervideo-CD, DVD. 4. Setzen Sie unter Videoqualität den Eintrag auf Automatisch, damit Pinnacle Studio HD ermitteln kann, mit welcher Kompression das Video auf dem Rohling gespeichert wird. 5. Um den Rechen- und Brennvorgang zu starten, klicken Sie auf die Schaltfläche Disc erstellen. Pinnacle Studio HD wird das Projekt zuerst rendern, dann in das gewählte Videoformat umrechnen und als letzten Schritt auf die Disc brennen. Die Dauer dieses Vorgangs ist davon abhängig, wie schnell Ihr PC ist. Es ist egal, in welcher Qualität der Film auf der Timeline vorliegt, ob Standard oder High Definition. Beim Brennen auf eine CD oder DVD wird der Film immer in das Standard Definition Format gewandelt.
259
Hinweis
Kapitel 13 – Film erstellen
Einstellungen für das Brennen einer DVD Sie können die Qualität Ihrer Videos und weitere Einstellungen manuell festlegen. Klicken Sie dafür auf die Schaltfläche Einstellungen.
Abbildung 13.2: Einstellungen für das Erstellen einer DVD
Unter Audio-Komprimierung können Sie das Audioformat für die DVD auswählen. Entscheidend ist hier, wie Sie auf der Timeline das Audio bearbeitet haben. Wenn Sie das Audio im Surround-Modus bearbeitet haben, sollten Sie hier gegebenenfalls die Audioeinstellungen anpassen. Die Datenrate kann dann verändert werden, wenn unter Videoqualität/Speicherbelegung die Einstellung Benutzerdefiniert gewählt ist. Die Datenrate zeigt an, wie viele Daten pro Zeiteinheit verarbeitet werden. Je höher die Zahl, desto besser die Qualität. Hier sind Werte zwischen 3000 bis 8500 KBits/Sekunde möglich. Übliche Datenraten sind 4000 bis 6000 KBits/Sekunde. Eine zu hohe Abweichung kann beim Abspielen zu Problemen führen. DVD-Abspielgeräte haben zum Teil Mühe, selbst gebrannte DVDs wiederzugeben. Unter Brennoptionen können Sie einstellen, ob die Daten direkt auf eine Disc gebrannt oder zuerst in einer sogenannten Image-Datei auf der Festplatte gespeichert werden sollen. Speichern Sie das Image auf Ihrer Festplatte ab, am besten dort, wo Sie Ihre Projektdaten gespeichert haben.
260
Ausgabe auf CD, DVD oder Blu-ray Disc Tipp
Disc-Inhalt erstellen und danach brennen Bei diesem Modus werden die Daten zuerst auf der Festplatte gespeichert und danach auf das Medium geschrieben bzw. gebrannt.
Disc-Image erstellen (noch nicht brennen) Ein Disc-Image dient dazu, den gesamten Film in einer Datei auf dem PC zwischenzuspeichern, um ihn später auf diesem oder auf einem anderen PC zu brennen. So können Sie z.B. mit Pinnacle Studio HD ein Disc-Image erstellen, falls auf dem PC kein Brenner verfügbar ist. Ein anderer Vorteil eines Image ist, dass der ganze Inhalt einer Disc in einer Datei gespeichert wird, sodass nicht einzelne Elemente verloren gehen können. Im Image wird sogar die Menüverknüpfung mitgespeichert. Ein Disc-Image können Sie an einen beliebigen Ort auf der Festplatte speichern und in einem zweiten Schritt auf die Disc brennen. Das Brennen kann auch mit einem anderen Brennprogramm erfolgen, z.B. mit Nero. Sobald ein Image gebrannt wurde, befinden sich auf der DVD genau die gleichen Daten, wie wenn diese direkt auf Disc gebrannt würden.
Von Disc-Image brennen Dieser Modus dient dazu, ein zuvor erstelltes Image von der Festplatte auf eine Disc zu brennen. Dabei wird nicht der aktuelle Film auf der Timeline gebrannt, sondern von einer Image-Datei auf der Festplatte.
Blu-ray Disc Hinweis
Ultimate & Ultimate Collection Diese Funktion ist nur in Pinnacle Studio HD Ultimate und Pinnacle Studio HD Ultimate Collection Version 15 verfügbar. Bei der Blu-ray Disc handelt es sich um die Nachfolge der DVD. Eine Blu-ray Disc kann viel mehr Daten speichern als eine CD bzw. DVD und eignet sich darum eher für das Erstellen von Filmen in High-Definition-Qualität. High-Definition-Filme können in High Definition nur auf Blu-ray gebrannt werden. Auf eine CD oder DVD ist dies nicht möglich. Es ist zwar möglich, einen High-Definition-Film auf CD oder DVD zu brennen, dabei wird der Film aber in das Standard Definition Format umgewandelt. Wenn Sie eine Blu-ray Disc brennen möchten, müssen Sie einen entsprechenden Brenner und Rohlinge besitzen. Beides ist derzeit noch relativ teuer, aber wie stets bei Computerprodukten darf man davon ausgehen, dass die Preise fallen werden, sobald sich das Blu-ray-Format weiter etabliert. Auf eine Blu-ray Disc können bis zu 3 Stunden in bester High-Definition-Qualität mit einer Datenrate von bis zu 15 MBit/s gebrannt werden. Blu-ray Discs können später nur auf einem Blu-ray-Abspielgerät (Player) wiedergegeben werden.
261
Kapitel 13 – Film erstellen
Abbildung 13.3: Brennen auf eine Blu-ray Disc
HD-DVD Bei der HD-DVD, High Density Digital Versatile Disc, handelt es sich um ein Format, das Ende 2007 noch als möglicher Nachfolger der DVD galt. Der Markt hat sich aber für Bluray entschieden. HD-DVD hat heute keine Bedeutung mehr, da heute praktisch niemand über ein abspielfähiges HD-DVD-Gerät verfügt. PCs mit HD-DVD-Laufwerken kann man heutzutage nicht mehr kaufen. Falls Sie aber trotzdem ein HD-DVD-fähiges Abspielgerät besitzen, können Sie mit Pinnacle Studio HD DVD-Rohlinge in diesem Format brennen. Sie können mit dieser Einstellung High-Definition-Video-Inhalt im HD-DVD-Format auf eine DVD (bis zu 24 Minuten) mit einem DVD-Brenner brennen. Eine DVD mit HD-DVD-Inhalt kann später auf folgenden Abspielgeräten wiedergegeben werden: 쐽 auf jedem HD-DVD-Player einschließlich einer Microsoft Xbox 360 mit integriertem Laufwerk 쐽 auf einem Computer mit HD-DVD-Laufwerk und einer geeigneten Wiedergabesoftware Beim HD-DVD-Format können die Daten bis zu einer Datenrate von 25 MBit/s gespeichert werden.
262
Ausgabe in eine Datei
Abbildung 13.4: Disc mit HD-DVD-Inhalt auf einer DVD
Ausgabe in eine Datei Mit Pinnacle Studio HD haben Sie die Möglichkeit, Ihren Film in eine Datei zu exportieren, die Sie dann später z.B. ins Internet laden, auf dem PC speichern oder auf Daten-CD, -DVD und -Blu-ray weitergeben können. Bevor Sie eine Datei erstellen, müssen Sie sich überlegen, wer diese Datei später ansehen wird. Nicht jeder Dateityp kann von jedem Computer wiedergegeben werden. Oft fehlt auf einem PC die nötige Abspielsoftware, um den Film anzuschauen, oder ein PC ist zu langsam, um sehr große Datenmengen anzuzeigen. Wenn Sie sichergehen wollen, dass die Datei auf jedem PC abspielbar ist, wählen Sie das MPEG-1-Format. Dieses Format bietet nicht die beste Qualität, ist aber mit allen PCs kompatibel, da der Windows Media Player dieses Format immer abspielen kann. Weitere Informationen zu den einzelnen Videoformaten entnehmen Sie Kapitel 15 „Videoformate“. 1. Wählen Sie unter Film erstellen das Symbol für Datei.
Abbildung 13.5: Mit Pinnacle Studio HD können Sie verschiedene Formate exportieren
263
Kapitel 13 – Film erstellen 2. Wählen Sie aus der Dropdown-Liste das gewünschte Format aus. 3. Je nach gewähltem Format haben Sie verschiedene Einstellungsmöglichkeiten, die nachfolgend kurz erläutert werden. Der große Kreis zeigt Ihnen an, wie viel Platz auf der gewählten Festplatte noch zur Verfügung steht. Im Beispiel wurde die Festplatte C: gewählt, auf der noch 29,4 GByte Speicherplatz frei sind. Sie können für jedes der vorgegebenen Formate weitere Einstellungen vornehmen, indem Sie auf den Knopf Einstellungen klicken. In Kapitel 15 „Videoformate“ finden Sie weitere Ausführungen zu den einzelnen Formaten.
Audio Mit dieser Option können Sie nur das Audio Ihres Films exportieren, und zwar im MP3- oder WAV-Format. Wenn Sie also eine oder mehrere Audiospuren exportieren möchten, dann wählen Sie die Option Audio.
Abbildung 13.6: Audioexport-Einstellungen
Wählen Sie unter Voreinstellung, in welchem Format das Audio exportiert werden soll, und starten Sie dann die Ausgabe mit Datei erstellen. Wenn Sie Benutzerdefiniert wählen, können Sie die einzelnen Einstellungen manuell noch verändern.
AVI Wählen Sie unter Format AVI aus und klicken Sie auf Einstellungen, um diese anzupassen. Das AVI-Format wird meistens dazu verwendet, Dateien in sehr guter Qualität zu speichern. Das AVI-Format ist kein streng definiertes Format, sondern lediglich ein soge-
264
Ausgabe in eine Datei nanntes Containerformat. Es muss noch angegeben werden, mit welchem Codec die Datei erstellt wird. Codecs sind Algorithmen, die ein Video komprimieren und speichern. Das große Problem dabei ist, dass eine AVI-Datei später nicht mehr abgespielt werden kann, wenn der entsprechende Codec auf dem PC nicht zur Verfügung steht.
Abbildung 13.7: Einstellungen für das AVI-Format
Das lässt sich umgehen, wenn man die Einstellung Vollbild (DV) wählt. Wie Sie sehen, können keine Einstellungen vorgenommen und verändert werden. Eine solche AVI-Datei kann auf jedem PC ohne Probleme abgespielt werden, weil der Codec Bestandteil von Windows ist. AVI (DV) ist das Format, welches auf Ihrer Festplatte erstellt wird, wenn Sie einen Videoclip von einer MiniDV-Kamera auf den PC laden. Da diese Übertragung ohne zusätzliche Komprimierung erfolgt, wird eine Datei ohne Qualitätsverlust geschrieben. Wenn Sie nun eine AVI-(DV)-Datei von Ihrem Film erstellen möchten, benötigen Sie 13 GByte Festplattenspeicher für einen einstündigen Film in Standard Definition.
DivX Eine DivX-Datei ist im Prinzip eine AVI-Datei mit dem DivX-Codec. Diese Art Datei wurde entwickelt, um möglichst lange Filme in relativ hoher Qualität zu speichern und dabei nicht allzu große Daten zu erzeugen. Neu in der Version 15 ist, dass Sie auch DivX-Plus-HD Videos exportieren können. Unter Voreinstellung können Sie eine vordefinierte Qualität auswählen. Achten Sie bei den verschiedenen Voreinstellungen auf die Auflösung des Bildes. Wenn Sie alles individuell anpassen möchten, wählen Sie Benutzerdefiniert.
265
Kapitel 13 – Film erstellen
Abbildung 13.8: Einstellungen für das DivX-Format
Je nachdem, welche Einstellung Sie gewählt haben, zeigt Ihnen Pinnacle Studio HD mit dem Tortendiagramm an, wie groß die Videodatei nach dem Export sein wird.
Abbildung 13.9: Unter Größe können Sie die Dateigröße des gewählten Formats überprüfen
Flash-Video Flash-Video-Filme eignen sich vor allem für das Hochladen ins Internet. Filme auf Videoplattformen wie youtube.com sind ebenfalls in diesem Format gespeichert. Damit Flash-Filme später angezeigt werden können, muss der Flash Player, ein spezielles Abspielprogramm, auf dem PC installiert sein. Sie können den Flash Player kostenlos bei Adobe unter www.adobe.de herunterladen. Unter Voreinstellung können Sie die Kompression auswählen. Eventuell müssen Sie unterschiedliche Einstellungen ausprobieren, um zu sehen, welche die besten Ergebnisse liefert.
266
Ausgabe in eine Datei
Abbildung 13.10: Flash-Video-Export
MPEG-1 und MPEG-2 Das MPEG-1-Format wird verwendet, wenn man einen Videoclip ohne Probleme auf jedem PC abspielen möchte. Die MPEG-1-Dateien entsprechen der Qualität einer VideoCD. MPEG-1 ist ein Standard-Videocodec im MPEG-Videoformat. Die Einstellungen können nicht verändert werden, abgesehen von einer, und zwar der Datenrate, d.h., wie viele Informationen pro Zeiteinheit gespeichert werden.
Abbildung 13.11: Einstellungen für das MPEG-2-Format
267
Kapitel 13 – Film erstellen Das MPEG-2-Format wird im Allgemeinen für DVDs verwendet. Eine MPEG-2-Datei kann auf einem PC mit einer DVD-Abspielsoftware wiedergegeben werden. MPEG-2Dateien sind High-Definition-kompatibel. Je höher die Datenrate gewählt wird, desto größer wird eine Datei auf der Festplatte und desto besser ist die Qualität der Videodatei. Wenn ein Film im High Definition Format exportiert werden soll, dann wählen Sie unter Voreinstellung das gewünschte HD-Format aus. Weitere Infos zur MPEG-2-Kompression lesen Sie ebenfalls in Kapitel 15 „Videoformate“. In Tabelle 13.2 sind alle Standardeinstellungen aufgelistet, die mit Studio HD direkt exportiert werden können. Selbstverständlich können alle Voreinstellungen noch individuell angepasst werden. Voreinstellung
Auflösung
Datenrate
DVD-kompatibel
720 x 576
6 Mbit/s
Interlaced 50 Halbbilder
SVCD-kompatibel
480 x 576
2,4 Mbit/s
Interlaced 50 Halbbilder
HD 720p
1280 x 720
15 MBit/s
Progressive 25 Vollbilder
HDV 1080i
1440 x 1080
25 MBit/s
Interlaced 50 Halbbilder
HD 1080i
1920 x 1080
30 MBit/s
Interlaced 50 Halbbilder
HD 1080p
1920 x 1080
30 MBit/s
Progressive 25 Vollbilder
HD 1080/24p
1920 x 1080
30 MBit/s
Progressive 24 Vollbilder
Tabelle 13.2: Die unterschiedlichen MPEG-2-Exporteinstellungen
Sobald Sie eine Voreinstellung gewählt haben, sehen Sie eine Zusammenfassung der Einstellungen.
Abbildung 13.12: Zusammenfassung der Einstellungen
268
Ausgabe in eine Datei
MPEG-2 TS Mit der Option MPEG-2 TS kann eine MPEG-2-Datei erstellt werden, die wieder auf eine Kamera zurückgespielt werden kann, die auf Flashspeicher oder Festplatte aufzeichnet. Somit können Sie fertig geschnittene Videos in High-Definition-Qualität später von Ihrer Videokamera am Fernseher präsentieren. ohne dass Sie einen Blu-rayPlayer benötigen.
Abbildung 13.13: Einstellungen für MPEG-2 TS
Die Datei können Sie dann mit dem Windows-Explorer über USB zurück auf Ihre Kamera kopieren.
MPEG-4 Das MPEG-4-Format ist ein Containerformat und wurde ursprünglich zur Übertragung von Videos bei geringen Übertragungsraten entwickelt. Es eignet sich vor allem für Videodateien mit relativ kleinen Datenraten, die sehr stark komprimiert sind. So können z.B. MPEG-4-Filme auf manchen Handys abgespielt werden. High-Definition-Filme können auch in MPEG-4 exportiert werden, allerdings lediglich bis 12 MBit/s. In MPEG-2 mit bis zu 30 MBit/s könnten weitaus bessere Qualitäten erreicht werden. Unter Voreinstellungen fällt auf, dass einige Einstellungen zur Verfügung stehen, um wirklich sehr kleine Filme erstellen zu können. Diese Funktion muss über das Internet freigeschaltet werden, außer Sie besitzen eine Studio HD Ultimate-Version, in der sie bereits im Lieferumfang enthalten ist.
269
Kapitel 13 – Film erstellen
Abbildung 13.14: Einstellungen für das MPEG-4-Format
iPod-kompatibel Mit dieser Einstellung können Videodateien erstellt werden, die auf einem iPod oder iPhone von Apple betrachtet werden können. Der iPod, besser bekannt als MP3-Player, spielt nämlich auch Videos ab. Beim iPod-Videoformat handelt es sich um spezielle MPEG-4-Dateien, die in unterschiedlicher Qualität exportiert werden können.
Abbildung 13.15: Einstellungen für das iPod-kompatible Videoformat
270
Ausgabe in eine Datei Sobald die Dateien erstellt wurden, können diese mit iTunes auf das Gerät übertragen werden.
QuickTime MOV Das QuickTime-Format wurde von der Firma Apple entwickelt, kann aber sowohl auf MAC- als auch auf Windows-Computern abgespielt werden, z.B. mit dem kostenlosen QuickTime Player von Apple (http://www.apple.com/quicktime/). Das QuickTime-Format kann mit unterschiedlichen Codecs erstellt werden, je nachdem, ob eine qualitativ hochstehende Datei für die Verwendung am PC oder eine komprimierte Version für das Web eingesetzt wird. Neu in der Version 15 ist, dass auch QuickTime-Filme in High-Definition-Qualität ausgegeben werden können.
Abbildung 13.16: Exporteinstellungen für das QuickTime-Format
Real Media Real-Media-Dateien eignen sich vor allem für Filme, die später übers Internet angeschaut werden können. Die Videodateien werden sehr stark komprimiert, damit die Datenleitung zum Internet mit solchen Filmen nicht überfordert wird. Unter Daten können Sie Informationen eingeben, die der Betrachter sehen soll, wenn er das Video übers Internet abspielt. Rechts daneben können Sie angeben, wie schnell die Internetverbindung Ihrer Zielgruppe sein wird. Dadurch lässt sich das Video in verschiedenen Qualitäten abspeichern.
271
Kapitel 13 – Film erstellen
Abbildung 13.17: Einstellungen für Real Media
Sony PSP-kompatibel Die Sony PlayStation Portable ist ein mobiles Spielgerät, das auch zur Betrachtung von Videodateien verwendet werden kann. Mit dieser Einstellung können Videoclips in das Sony PSP-kompatible MPEG-4-Format konvertiert werden.
Abbildung 13.18: Einstellungen für das Sony PSP-kompatible Format
272
Ausgabe in eine Datei Sobald die Videodatei konvertiert und auf die Festplatte gespeichert wurde, kann diese auf eine Sony PlayStation Portable übertragen werden.
Windows Media Das Windows Media-Format eignet sich ebenfalls für das Verteilen von Videos über das Internet. Windows Media-Videos können standardmäßig auf jedem PC abgespielt werden, da grundsätzlich auf jedem PC der Windows Media Player installiert ist. Wählen Sie unter Voreinstellung eine Vorlage für Ihren Film aus. Wenn Sie einen Film für das Internet erstellen möchten, sollten Sie darauf achten, dass die Datei möglichst klein wird.
Abbildung 13.19: Einstellungen für das Windows Media-Format
Unter Daten können Sie Ihre Angaben eintragen. Diese werden beim Abspielen des Films in der Fußleiste des Windows Media Players angezeigt.
3GP Beim Videoformat 3GP handelt es sich um ein Format, das von Mobiltelefonen wiedergegeben werden kann. Sie können also Ihre Filme in das 3GP-Format exportieren, wenn Sie die Filme später auf einem Mobiltelefon anschauen oder per MMS versenden möchten.
273
Kapitel 13 – Film erstellen
Abbildung 13.20: Einstellungen für das 3GP-Format
Datei exportieren Mit Markern auf der Timeline können Sie angeben, welchen Bereich vom Film Sie exportieren möchten. Dazu müssen Sie auf der Timeline mit der Taste (M) mindestens einen Marker erstellen. Nun können Sie angeben, ob der Film vom Anfang bis zu einem Marker, von einem Marker zu einem anderen oder von einem Marker bis zum Schluss exportiert werden soll. Wenn Sie nichts angeben, dann wird der Film immer von Anfang bis zum Schluss exportiert.
Abbildung 13.21: Der Film kann stückweise exportiert werden, wenn Marker auf der Timeline verwendet wurden
Starten Sie nun den Export des Films wie folgt. 1. Klicken Sie auf Datei erstellen. 2. Wählen Sie einen Speicherort für die Videodatei auf der Festplatte und geben Sie einen Dateinamen an. Klicken Sie danach auf OK, um den Export zu starten.
274
Ausgabe auf ein Band Pinnacle Studio HD beginnt nun mit dem Rendern des Projekts. Dabei werden alle Übergänge, Effekte usw. auf die Festplatte gerechnet. Sobald dieser Vorgang beendet ist, konvertiert Pinnacle Studio HD den Film in das angegebene Format. Das kann je nach Filmlänge und PC-Geschwindigkeit sehr stark variieren.
Abbildung 13.22: Pinnacle Studio HD berechnet, d.h. rendert, die Übergänge, Effekte usw.
Pinnacle Studio HD zeigt Ihnen an, wie viele Bilder noch zu bearbeiten sind und wie viele schon umgerechnet wurden. Der Timeline-Scrubber bewegt sich auf der Timeline, und im Vorschaufenster wird das Bild angezeigt, das gerade berechnet wird. Am Statusbalken unterhalb des Vorschaufensters kann ebenfalls der Fortschritt des Vorgangs beobachtet werden.
Abbildung 13.23: Die einzelnen Bilder werden in das gewählte Format exportiert
3. Sie können den Vorgang jederzeit mit Abbrechen unterbrechen.
Ausgabe auf ein Band Die Ausgabe auf ein Band scheint vielleicht im ersten Moment als veraltet und nicht sinnvoll. Viele Menschen verfügen aber immer noch über ein VHS-Abspielgerät und können noch keine DVDs anschauen. Die Ausgabe auf ein MiniDV-Band ist von Vorteil, wenn ein Film ohne Qualitätsverlust gespeichert werden soll. Ein MiniDV-Band mit einem Film in digitaler Form eignet sich zudem als optimales Speichermedium. Ein solcher Film kann jederzeit wieder digital in den PC eingespielt werden, ohne dass es zu merklichen Qualitätsverlusten kommt. So gibt es grundsätzlich zwei verschiedene Vorteile für den Export bzw. die Ausgabe auf ein Band. 쐽 Analog: Erstellen eines Bands für Besitzer eines analogen Abspielgeräts wie VHS, Super-VHS oder Hi8.
275
Kapitel 13 – Film erstellen Tipp
Falls Sie planen, mehrere VHS-Kassetten zu produzieren, sollten Sie zuerst ein digitales Masterband und dann mehrere Kopien davon erstellen. Das spart Zeit, da Sie nicht immer am PC sitzen und die Aufnahme kontrollieren müssen. Schließen Sie dazu den analogen Ausgang der Kamera an den Eingang des VHS-Rekorders. 쐽 Digital: Erstellen eines Masterbands für das eigene Filmarchiv. Gerade wenn die Originalaufnahmen digital erstellt wurden, empfiehlt es sich, vom Film ein sogenanntes Masterband oder Archivband anzufertigen. Der Film wird unkomprimiert, in voller Qualität, auf ein digitales Band gespielt, sodass er für weitere Verwendungen ohne Qualitätseinbußen zur Verfügung steht. Der Originalfilm kann auf der Festplatte gelöscht werden. Im Prinzip kann ein digitales Band auch für Präsentationen eingesetzt werden, da der Film nicht komprimiert wurde. So erzielen Sie gegenüber einer DVD eine bessere Qualität.
Abbildung 13.24: Modus für das Erstellen eines Bands
Beim Ausgeben auf ein Band ist wieder der Diskometer zu sehen, der Ihnen anzeigt, wie viel Platz auf der Festplatte vorhanden ist. Da der Film beim Ausgeben auf Band nicht auf die Festplatte gespeichert werden muss, wird auf der Festplatte bedeutend weniger Platz gebraucht. Der einzige Platz, der benötigt wird, ist der für die temporären Dateien, falls diese nicht bereits während der Arbeit erstellt wurden. Beim Ausgeben auf Band ist es wichtig, dass das Aufnahmegerät von Pinnacle Studio HD und Windows erkannt wurde und dass vor allem eine Ausgabe möglich ist. Noch immer haben z.B. nicht alle DV-Kameras einen digitalen Eingang, da dieser vom Hersteller nicht freigegeben wurde. Bei einem VHS-Recorder müssen Sie darauf achten, dass die Kabel am Eingang angeschlossen sind und der richtige Kanal für die Aufnahme eingestellt ist. Sie können bei beiden Varianten, also digital über FireWire oder analog über ein VHS- oder S-VHS-Signal, überprüfen, ob das Bild und das Audio ankommen, indem Sie eine kurze Testaufnahme machen. Spielen Sie einige Minuten auf das Band und kontrollieren Sie die Aufnahme.
Digitale Ausgabe Um den Film auf ein digitales Aufnahmegerät aufzunehmen, muss dieses korrekt mit dem PC verbunden sein. Dies geschieht über das FireWire-Kabel. Dieser Prozess wird auch Mastern genannt, da am Schluss ein Band in bester Qualität und ohne Verlust entsteht. Studios und TV-Anstalten erstellen für jeden Film ein sogenanntes Masterband.
276
Ausgabe auf ein Band 1. Öffnen Sie die Einstellungen, um zu überprüfen, ob alles richtig eingestellt ist. 2. Unter Format und der Kategorie Ausgabe stellen Sie DV-Camcorder ein. Unter Gerät erscheint dann gleich der Name des angeschlossenen Geräts. 3. Damit das digitale Aufnahmegerät automatisch mit der Aufnahme beginnt, sollten Sie in den Einstellungen unter Ausgabe-Optionen die Option Aufnahme automatisch starten/anhalten wählen. Pinnacle Studio HD startet dann die Aufnahmefunktion am Aufnahmegerät automatisch.
Abbildung 13.25: Einstellungen für den Export über FireWire
Falls die Option DV-Camcorder nicht anwählbar ist, dann wurde das Aufnahmegerät, Rekorder oder Kamera, nicht richtig mit dem PC verbunden bzw. erkannt. Überprüfen Sie, ob sich das Aufnahmegerät im Aufnahmemodus befindet und ob das Kabel richtig angeschlossen ist. Für die Ausgabe auf Band gehen Sie wie folgt vor: 4. Verbinden Sie das Aufnahmegerät (Kamera, DV-Rekorder oder Ähnliches) über das entsprechende Kabel mit dem PC (meist geschieht das mit einem FireWire-Kabel). 5. Legen Sie ein leeres Band ein, das nicht schreibgeschützt ist, und schalten Sie das Aufnahmegerät in den Aufnahmemodus (VCR). 6. Wählen Sie Film auf Band ausgeben. 7. Bei Gerät wählen Sie das digitale Aufnahmegerät. Falls es nicht vorhanden ist, öffnen Sie die Einstellungen und legen das Gerät fest wie oben beschrieben. 8. Klicken Sie auf erstellen, damit die Effekte, Übergänge usw. gerechnet werden können.
277
Achtung
Kapitel 13 – Film erstellen 9. Sobald der Film gerendert wurde, starten Sie die Ausgabe mit einem Klick auf das Symbol Wiedergabe unterhalb des Vorschaufensters. 10. Der Film wird auf das Band ausgegeben, und sobald der Film zu Ende ist, wird die Aufnahme wieder gestoppt. 11. Versehen Sie das Band mit dem Schreibschutz am Bandrücken, damit es nicht aus Versehen überspielt wird.
Analoge Ausgabe Mit der analogen Ausgabe können Sie ein Video über ein VHS- oder Super-VHS-Signal ausgeben. Dafür können Sie z.B. die 700-USB- oder 700-PCI-Hardwarelösung von Pinnacle verwenden. Ebenso ist eine Grafikkarte mit analogen Ausgängen benutzbar, die Direct-Show-kompatibel ist. Bevor eine analoge Ausgabe möglich ist, muss die Hardware korrekt am PC installiert und angeschlossen sein. Schließen Sie die Ausgänge der Konverterhardware am PC mit den Eingängen des Rekorders zusammen. Falls Sie einen TV-Monitor an den Rekorder angeschlossen haben, sollten Sie einen kurzen Test durchführen, um das Bild zu kontrollieren. Für die Ausgabe auf ein Band gehen Sie wie folgt vor: 1. Schließen Sie einen Videorekorder über eine der oben erwähnten Hardwarekomponenten an. 2. Wechseln Sie in den Schritt 3 Film erstellen und wählen Sie aus dem Album den Eintrag Band. 3. Als Ausgabetyp wählen Sie Analoger Videoausgang. 4. Unter Gerät wählen Sie die entsprechende Hardwarelösung aus. Im Beispiel wurde eine 710-USB-Box an den PC angeschlossen.
Abbildung 13.26: Für eine analoge Ausgabe müssen Sie über eine Konverterhardware verfügen
5. Um sicherzugehen, dass alles richtig verkabelt wurde, führen Sie am besten einen kurzen Test mit einer Versuchskassette durch.
278
Ausgabe und Upload ins Internet 6. Starten Sie das Rendern des Films, indem Sie auf Erstellen klicken.
Abbildung 13.27: Sobald der Film komplett gerechnet wurde, kann die Ausgabe gestartet werden
7. Legen Sie ein neues Band in den Rekorder, falls dies noch nicht geschehen ist. 8. Starten Sie die Aufnahme auf Ihrem Rekorder. 9. Starten Sie die Ausgabe, indem Sie auf dem PC auf den Wiedergabe-Knopf unterhalb des Vorschaufensters klicken. Der Film wird auf das Band geschrieben.
Ausgabe und Upload ins Internet Mit der Funktion Web können Sie Ihre Videos direkt ins Internet uploaden. Dazu benötigen Sie aber einen Zugang beim entsprechenden Anbieter von Onlinespeicherplatz und müssen über den PC mit dem Internet verbunden sein. Führen Sie die folgenden Schritte durch, um einen solchen Zugang einzurichten und Ihre Filme hochzuladen.
Upload auf YouTube Die folgende Beschreibung bezieht sich auf das Hochladen nach YouTube und kann bei anderen Anbietern abweichen.
Abbildung 13.28: Upload eines Videos nach YouTube
1. Wählen Sie unter Upload auf diese Webseite YouTube aus und klicken Sie dann auf Erstellen.
279
Kapitel 13 – Film erstellen
Abbildung 13.29: Füllen Sie hier die Felder aus, damit der Film später in der richtigen Kategorie zu sehen ist
2. Füllen Sie die Felder aus und klicken Sie auf Fortfahren.
Abbildung 13.30: Melden Sie sich bei YouTube an
3. Melden Sie sich bei YouTube mit Benutzer-ID und Passwort an. Wenn Sie noch keinen Zugang zu YouTube haben, können Sie sich registrieren. Klicken Sie dazu auf den Link Anmelden.
280
Ausgabe und Upload ins Internet
Abbildung 13.31: Anmeldung bei YouTube
4. Füllen Sie die Felder aus und klicken Sie dann auf Ich stimme zu. 5. Schließen Sie die Internetseite und geben Sie in das YouTube-Anmeldefenster von Pinnacle Studio HD Ihre Benutzer-ID und das Passwort ein, klicken Sie dann auf Anmeldung. 6. Das Video wird nun auf YouTube geladen und kann dort in Ihrem Verzeichnis wiedergegeben werden.
Abbildung 13.32: Der Film wird auf YouTube geladen
281
Kapitel 13 – Film erstellen
Upload auf Yahoo! Video Die folgende Beschreibung bezieht sich auf das Hochladen nach Yahoo! Video und kann bei anderen Anbietern abweichen.
Abbildung 13.33: Laden Sie Ihre Filme direkt auf ein Internetvideoportal wie Yahoo! Video
1. Wählen Sie zuerst den Anbieter aus, auf dessen Seite Sie das Video hochladen möchten. Unter Voreinstellung können Sie die Qualität auswählen. 2. Klicken Sie auf Erstellen, um fortzufahren. 3. Falls Sie bereits einen Zugang zu Yahoo! Video besitzen, können Sie Ihre ID und das Passwort eingeben. Ansonsten folgen Sie den weiteren Schritten.
Abbildung 13.34: Geben Sie Ihre Daten ein, falls Sie bereits eine ID und ein Passwort besitzen
4. Falls Sie noch keine ID und kein Passwort haben, klicken Sie auf Registrieren am unteren Rand des Fensters. 5. Ergänzen Sie das Registrierungsformular mit Ihren Daten. 6. Klicken Sie auf Account erstellen, um die Registrierung abzuschließen.
282
Ausgabe und Upload ins Internet
Abbildung 13.35: Das Registrierungsformular von Yahoo!
7. Tragen Sie Ihre soeben registrierten Daten in das Anmeldefenster ein und klicken Sie auf Anmelden.
Abbildung 13.36: Mit Benutzernamen und Passwort einloggen
8. Tragen Sie die Details zu Ihrem Film ein. Anhand dieser Daten wird der Film in die entsprechende Kategorie bei Yahoo! Video eingeordnet.
283
Kapitel 13 – Film erstellen
Abbildung 13.37: Füllen Sie die Felder aus, damit der Film in der richtigen Kategorie zu sehen ist
9. Klicken Sie auf Fortfahren, um ins nächste Fenster zu gelangen. 10. Lesen Sie die Besonderen Geschäftsbedingungen von Yahoo! Video und klicken Sie auf Ich stimme zu, falls Sie damit einverstanden sind.
Abbildung 13.38: Lesen Sie die Geschäftsbedingungen durch, bevor Sie fortfahren
Der Film wird nun gerendert, in das entsprechende Format umgewandelt und danach automatisch auf die Yahoo!-Seite hochgeladen. 11. Sobald der Film fertig hochgeladen wurde, können Sie auf das WWW-Symbol klicken, um den Film online zu betrachten.
Abbildung 13.39: Klicken Sie hier, um Ihren soeben hochgeladenen Film online zu sehen
284
14 Projekte weitergeben, sichern und löschen Nach dem erfolgreichen Exportieren eines Filmprojekts taucht irgendwann die Frage auf, wo und was auf der Festplatte gelöscht werden kann, um wieder Platz für weitere Projekte zu haben. Zudem müssen Sie sich Gedanken darüber machen, welche Daten Sie archivieren und speichern möchten, um den Film in bester Qualität zu behalten, damit Sie später jederzeit wieder eine Kopie fürs Internet oder auf DVD erstellen können. Sind die Daten einmal komprimiert und in einer schlechten Qualität gespeichert, lassen sie sich nicht mehr verbessern. Behalten Sie die Daten eines Projekts immer in bester Qualität auf einem Datenträger gespeichert, um später jederzeit eine Kopie in reduzierter Qualität zu erstellen. Eine DVD-Video kann leider keine Videos in High Definition speichern, und die nachträgliche Bearbeitung ist mit dem Umkopieren der Daten verbunden. Es macht also durchaus Sinn, eine weitere Kopie des Films als Datei zu speichern, die möglichst wenig komprimiert ist. Eine DVD oder Blu-ray eignet sich sehr gut, um den Film weiterzugeben, da man heute davon ausgehen kann, dass jeder Haushalt über ein DVD-fähiges Abspielgerät verfügt. Wenn Sie also Ihr Filmprojekt als Disc-Image auf der Festplatte gespeichert haben, dann können Sie mit jedem Brennprogramm oder mit Pinancle Studio HD eine DVD erstellen, ohne das Projekt in Pinnacle Studio HD geöffnet zu haben. Wie Sie ein Disc-Image erstellen können, lesen Sie in Kapitel 13 „Film erstellen“. Nachfolgend beschreibe ich Ihnen, wie Sie Ihre Projekte archivieren, in welchen Formaten Sie die Filmprojekte speichern sollten und welche Daten Sie danach auf der Festplatte löschen können. Beginnen wir einmal mit der Archivierung eines Projekts mit der neuen Funktion in Pinncle Studio HD Version 15.
Projekte archivieren und wiederherstellen Neu in Pinnacle Studio HD Version 15 sind die Funktionen Projekt archivieren und Projekt wiederherstellen. Damit können Sie alle Daten eines Projekts an einen neuen Ort auf einer Festplatte kopieren. Dabei werden alle verwendeten Daten eines Projekts in den gewählten Ordner kopiert. Diese Funktion eignet sich, um alle Daten eines Projekts zu sichern oder auf einen anderen PC zu übertragen.
285
Tipp
Kapitel 14 – Projekte weitergeben, sichern und löschen
Ein Projekt archivieren Mit der Funktion Projekt archivieren können Sie ein Studio-Projekt mit sämtlichen Videound Audioclips sowie Foto- und Grafikdateien, die Sie verwendet haben, an einen anderen Speicherort auf einer Festplatte archivieren. Sie müssen vor dem Archivieren einen Ordner auf einer Festplatte als Ziel auswählen, und Studio kopiert dann alle benötigten Dateien in diesen Ordner. Wie dies funktioniert, zeige ich Ihnen nun Schritt für Schritt: 1. Öffnen Sie das Projekt in Pinnacle Studio, welches Sie archivieren möchten. Wählen Sie im Menü Datei den Eintrag Projekt öffnen und dann das zu öffnende Projekt aus. 2. Sobald das Projekt in Pinnacle Studio geladen ist, starten Sie die Archivieren-Funktion im Menü DATEI unter Projekt archivieren.
Abbildung 14.1: Pinnacle Studio errechnet die Größe des Archivs und die Dauer der Archivierung
Pinnacle Studio errechnet die Menge Daten, die archiviert bzw. kopiert wird, also das Projekt, die Video- und Audioclips sowie Fotos, Grafiken usw. Ebenfalls zeigt Studio die ungefähre Zeit an, die benötigt wird, um das Projekt zu archivieren. Die Menge an Daten ist davon abhängig, wie viele Videos usw. Sie in einem Projekt verwendet haben. Achtung
Wenn Sie ein Projekt mit dieser Funktion sichern möchten, dann achten Sie darauf, dass nur Clips gesichert bzw. archiviert werden, die Sie tatsächlich im Projekt verwendet haben. Clips, die zwar ins Album geladen, aber nicht auf die Timeline gelegt wurden, werden beim Archivieren ignoriert.
Abbildung 14.2: Beim Archivieren werden nur Clips gesichert, die tatsächlich auf der Timeline benutzt wurden
Sie sehen im Album, welche Clips im Projekt verwendet wurden, wenn diese über ein Häkchen oben rechts verfügen. In Abbildung 14.2 wurden die Clips 1, 2, 5 und 6 auf der Timeline angewendet. Die restlichen werden beim Archivieren ignoriert. Handelt es sich aber um eine Videodatei, die in einzelne Szenen unterteilt wurde, wird die ganze Videodatei archiviert, auch wenn nur eine Szene davon verwendet wurde.
286
Projekte archivieren und wiederherstellen 3. Klicken Sie auf OK, um fortzufahren. 4. Wählen Sie im SPEICHERN UNTER-Dialog einen Speicherort für das Archiv aus.
Abbildung 14.3: Wählen Sie einen Speicherort auf der Festplatte oder auf einer externen Festplatte aus, in den das Archiv gespeichert werden soll
5. Wählen Sie unter Dateiname einen Namen für das Studio-Archiv aus und klicken Sie dann auf Speichern.
Abbildung 14.4: Die Daten werden an den gewünschten Ort kopiert bzw. archiviert
Die Originaldateien bleiben aber am Ursprungsort und werden nicht gelöscht.
Abbildung 14.5: Wenn das Archiv erfolgreich erstellt wurde, erscheint eine Meldung
Die Dateien befinden sich nun im zuvor gewählten Verzeichnis auf der Festplatte.
287
Kapitel 14 – Projekte weitergeben, sichern und löschen
Abbildung 14.6: Nach erfolgreicher Archivierung speichert Studio HD die Projekt- und Archivdaten sowie die Medien ab
Pinnacle Studio HD erstellt einen Unterordner mit dem Projektnamen, in dem sich die Projekt- sowie die Mediendaten befinden.
Ein Projekt wiederherstellen Ein bereits archiviertes Projekt kann mit der Wiederherstellen-Funktion wiederhergestellt und weiterverarbeitet werden. Gehen Sie wie folgt vor, wenn Sie ein archiviertes Projekt wiederherstellen möchten: 1. Wählen Sie in Studio aus dem Menü Datei und dann Projekt wiederherstellen aus.
Abbildung 14.7: Wählen Sie zur Wiederherstellung eines Projekts die Archivdatei mit der Endung *.sta aus
288
Projekte archivieren und wiederherstellen 2. Suchen Sie auf Ihrem PC oder auf einem externen Speicher die Archivdatei mit der Endung *.sta aus und klicken Sie auf Öffnen. 3. Wählen Sie einen Speicherort auf der Festplatte aus, in den die Daten kopiert werden sollen.
Abbildung 14.8: Als Dateiname für das wiederhergestellte Projekt werden automatisch Datum und Uhrzeit der Sicherung hinzugefügt
4. Klicken Sie auf Speichern, um mit der Wiederherstellung zu beginnen.
Abbildung 14.9: Die Wiederherstellung des Projekts dauert je nach Größe des Archivs einige Minuten
5. Das Projekt wird automatisch in Pinnacle Studio HD geöffnet und kann nun weiterverarbeitet werden. Diese Funktion können Sie auch anwenden, wenn Sie nicht recht wissen, welche Daten eines Videoprojekts wo auf Ihrem PC abgelegt sind, und Sie die Pinnacle Studio-Daten bzw. -Projekte neu ordnen möchten. Archivieren Sie einfach alle Projekte zuerst in einen zentralen Ordner und stellen Sie dann die Projekte wieder her. Alle Daten eines Projekts sind dann pro Projekt geordnet. Allerdings gehen dabei Dateien verloren, die in keinem Projekt auf der Timeline verwendet wurden.
289
Tipp
Kapitel 14 – Projekte weitergeben, sichern und löschen
Filme präsentieren und weitergeben Wie bereits am Anfang dieses Kapitels erwähnt, eignet sich die DVD sehr gut, um Filme weiterzugeben. Wenn Sie aber einen Film in High-Definition-Qualität erstellt haben, dann möchten Sie keine DVD erstellen, da er beim Exportieren auf DVD in Standardauflösung heruntergerechnet wird. Eine Möglichkeit besteht darin, Filme auf Blu-ray zu brennen. Dazu benötigen Sie allerdings einen Blu-ray-Brenner, Blu-ray Discs und ein Blu-ray-fähiges Abspielgerät. Das ist heutzutage nichts Exotisches mehr, aber dennoch sollten Sie nicht davon ausgehen, dass jeder ein Blu-ray-fähiges Abspielgerät besitzt. Eine preisgünstige Verteilung in High Definition ist demzufolge fast nur als Datei möglich, denn praktisch jeder PC, der nicht allzu alt ist, sollte eine High-Definition-Datei mit einer Mediaplayer-Software wiedergeben können. Was aber, wenn Sie den Film auf einem TV-Gerät oder Videoprojektor betrachten möchten, ohne einen PC anzuschließen? Auch für diese Anwendung gibt es eine elegante Lösung, und zwar sogenannte Multimedia-Festplatten. Das sind grundsätzlich ganz normale Festplatten, die sich über USB mit dem PC verbinden lassen. Zusätzlich besitzen sie Video- und Audioausgänge, um die Filme in High Definition zum Beispiel über HDMI auszugeben. Davon gibt es mittlerweile einige Modelle. Eines davon ist das WD TV Live von Western Digital.
Abbildung 14.10: WD TV Live Hub von Western Digital mit interner 1-GByte-Festplatte
Filme können Sie direkt über USB auf die Multimedia-Festplatte kopieren. Die Festplatte schließen Sie dann über ein HDMI-Kabel an einen Fernseher oder Videoprojektor an. Mit der Fernbedienung wählen Sie die Filme aus, die Sie gerne betrachten möchten. Mit dieser Lösung sind Sie um einiges flexibler als mit einer DVD oder Blu-ray Disc, haben viel mehr Speicherplatz und können Videos in unterschiedlichen Formaten, Fotos und Musik im Wohnzimmer betrachten. Falls Sie einmal eine Präsentation außerhalb haben, dann nehmen Sie die Festplatte einfach mit und präsentieren die Videos an Ort und Stelle.
Abbildung 14.11: Multimedia-Festplatten verfügen über diverse Ausgänge, um die Videos in bester Qualität zu präsentieren
Ein etwas kleineres Modell ist das WD TV Live, ebenfalls von Western Digital. Dieses hat grundsätzlich die gleichen Funktionen wie das Live Hub, allerdings keine interne Festplatte. Sie müssen zum Betrachten von Filmen, Fotos und Musik eine zusätzliche
290
Filme präsentieren und weitergeben externe Festplatte anschließen oder die Daten mittels eines USB-Sticks über den Multimedia-Player wiedergeben.
Abbildung 14.12: Multimedia-Player von Western Digital, WD TV Live
Filme mit Pinnacle Studio HD exportieren und archivieren Film als Datei Nun stellt sich die Frage, in welcher Qualität die Filme mit Pinnacle Studio HD exportiert werden müssen, damit diese in bestmöglicher Qualität verfügbar sind. Nachfolgende Tabelle zeigt Ihnen, welches Format Sie mit Pinnacle Studio wählen sollten. Achten Sie aber unbedingt immer darauf, dass die Videodateien in bester Qualität und ohne Komprimierung von der Kamera auf den PC übertragen und bearbeitet worden sind. Ebenfalls sollten die Projekteinstellungen dem Format der Videos entsprechen. Wenn Sie also High Definition Videos in Studio HD bearbeiten, sollte das Projekt auch über diese Auflösung verfügen.
Film-/Projektauflösung
Exportformat und Studio HD-Einstellung
Ungefähre Größe pro Stunde
Standardauflösung (SD) mit 720 x 576 Pixeln
AVI-Vollbild (DV) mit 720 x 576 Pixeln
ca. 13 GByte
High Definition 720p
MPEG-2 – HD720p mit 1280 x 720 Pixeln
ca. 7,5 GByte
High Definition HDV 1440 x 1080i
MPEG-2 – HDV2 1080i mit 1440 x 1080 Pixeln
ca. 13 GByte
Full High Definition 1920 x 1080i
MPEG-2 – HD1080i mit 1920 x 1080 Pixeln
ca. 13 GByte
Tabelle 14.1: Exporteinstellungen in möglichst guter Qualität und hoher Datenrate
Ein Film im AVI-Format für SD und MPEG-2 für HD wird zwar nicht mehr zu 100 % die gleiche Qualität aufweisen wie die Ursprungsqualität auf der Kamera, aber die
291
Achtung
Kapitel 14 – Projekte weitergeben, sichern und löschen Daten sind möglichst wenig komprimiert im Vergleich zu all den anderen Formaten, die Sie mit Pinnacle Studio erstellen können. Den Qualitätsunterschied werden Sie kaum wahrnehmen. Eine solche Datei kann nun auf dem PC oder auf einer Multimedia-Festplatte wiedergegeben werden. Zudem können Sie diese Daten jederzeit wieder in Pinnacle Studio weiterverarbeiten, den Film kürzen usw. Einzig die einzelnen Spuren werden nicht mehr bearbeitbar sein. Persönlich behalte ich aber immer eine Filmdatei in dieser Qualität, um möglichst schnell, ohne ein Projekt wiederherzustellen, eine Kopie des Films zu haben.
Disc-Image Zusätzlich zu jedem Projekt empfehle ich, ein Disc-Image entweder für DVD oder Bluray zu erstellen. Bei einem Disc-Image handelt es sich um die gleichen Daten, die auch auf einer DVD-Video oder einem Blu-ray-Video gespeichert sind. Image bedeutet, dass ein Abbild als Datei auf dem PC vorliegt. Wenn Sie gefragt werden, eine Kopie des Films auf DVD abzugeben oder zu verkaufen, dann können Sie dieses Image direkt auf eine Disc brennen, ohne das Pinnacle Studio HD-Projekt zu öffnen oder noch auf dem PC zu haben. Sie müssen auch nicht eine bestehende Disc kopieren, denn dies dauert länger, als ein Image von der Festplatte zu brennen. Am besten eignet sich ein Image als ISO-Datei für DVDs. Das bedeutet, dass sämtliche Daten in einer sogenannten ISO-Image-Datei mit der Dateiendung ISO gespeichert sind. Der Vorteil dabei besteht darin, dass Sie eine Datei mit allen Daten und Unterverzeichnissen darin aufbewahren müssen, im Gegensatz zu einem Image, das aus dem Ordner Video_TS besteht. Ein ISO-Image kann mit Windows 7 ohne zusätzliche Software von der Festplatte auf eine DVD gebrannt werden, da eine Brennfunktion von ISO Images bereits in Windows 7 integriert ist. Ansonsten können Sie ISO Images mit einem Brennprogramm von der Festplatte auf eine DVD brennen. Dabei wird der Inhalt auf die DVD gebrannt und nicht die ISO-Datei. Das ist wichtig, da sonst die DVD später nicht abspielbar ist. Eine Anleitung, wie Sie ein ISO Image für DVDs und Disc-Image für Blu-rays erstellen, lesen Sie in Kapitel 13 „Film erstellen“.
Projekte und temporäre Daten löschen Wenn Sie Ihr Filmprojekt fertig geschnitten und alle Sicherungen erstellt haben, dann möchten Sie unter Umständen die Daten auf dem PC löschen, um Speicherplatz für neue Projekte freizugeben. Grundsätzlich sind Sie selbst dafür verantwortlich, wo Pinnacle Studio HD Daten auf dem PC speichert. Das bedeutet, dass Sie bereits beim Einlesen von Videos, Musik, Fotos usw. angeben mussten, in welchen Ordnern auf der Festplatte die Daten sind. Am besten ist es, wenn Sie ein Projekt so aufbauen, wie es in Kapitel 1, Abschnitt „Das erste Projekt“ beschrieben wird. Dann wissen Sie immer, wo Ihre Daten auf dem PC gespeichert sind und welche Sie löschen können.
Keine Ahnung, wo die Dateien sind? Wenn Sie nicht wissen, wo auf dem PC oder in welchem Ordner Ihre Dateien gespeichert sind, die Sie in einem Filmprojekt verwendet haben, haben Sie in Pinnacle Studio HD die Möglichkeit, dies herauszufinden. Gehen Sie dazu wie folgt vor: 1. Öffnen Sie das Studio HD-Projekt, von dem Sie nicht mehr wissen, wo die Mediendaten gespeichert sind.
292
Projekte und temporäre Daten löschen
Abbildung 14.13: Klicken Sie mit der rechten Maustaste auf einen Clip, um die Szene im Album zu markieren
2. Klicken Sie mit der rechten Maustaste auf einen Videoclip auf der Timeline und wählen Sie Szene im Album suchen bzw. klicken Sie rechts auf ein Foto und wählen Sie Bild im Album suchen, um den gewählten Clip im Album zu markieren.
Abbildung 14.14: Im Album kann der Ordner, in dem sich die Video- und Fotodateien befinden, mit einem Rechtsklick geöffnet werden
293
Kapitel 14 – Projekte weitergeben, sichern und löschen Der Clip ist nun im Album geladen. Nun können Sie noch den Ordner auf der Festplatte öffnen, indem Sie den nächsten Schritt ausführen: 3. Klicken Sie mit der rechten Maustaste auf den Clip im Album und wählen Sie Content-Ordner öffnen, um den Windows-Explorer zu öffnen und den gewählten Clip als Datei anzuzeigen.
Abbildung 14.15: Im geöffneten Fenster vom Windows-Explorer werden nun die Dateien angezeigt
4. Schließen Sie nun Pinnacle Studio HD, damit die Dateien auf der Festplatte gelöscht werden können. Achtung
Wenn Sie Video-, Audioclips und Fotos, die in einem Projekt von Pinnacle Studio HD verwendet wurden, auf der Festplatte löschen, ist das Projekt später nicht mehr bearbeitbar. Löschen Sie also die Daten nur, wenn Sie diese sicher nicht mehr brauchen oder auf einen anderen Datenträger archiviert oder gesichert haben. 5. Löschen Sie nun die Dateien, die Sie auf dem PC nicht mehr benötigen.
Temporäre, Hilfs- oder Render-Dateien löschen Bei den temporären Dateien, auch Hilfs- oder Render-Dateien genannt, handelt es sich um Daten, die im Hintergrund von Pinnacle Studio HD geschrieben werden, und zwar immer dann, wenn Effekte, Übergänge, Farbkorrekturen usw. eingesetzt werden. Zudem werden temporäre Daten geschrieben, wenn der Film als Datei oder Disc erstellt wird. Um diese temporären Daten zu löschen, löschen Sie einfach den entsprechenden Ordner auf der Festplatte. Wenn Sie nicht wissen, wo dieser gespeichert ist, gehen Sie wie folgt vor:
294
Projekte und temporäre Daten löschen 1. Wählen Sie aus dem Menü SETUP die PROJEKT-VOREINSTELLUNGEN.
Abbildung 14.16: Klicken Sie auf Löschen, um die Hilfsdateien zu löschen
2. Klicken Sie auf LÖSCHEN und wählen Sie dann aus, welche Hilfsdateien gelöscht werden sollen.
Abbildung 14.17: Entscheiden Sie, welche temporären Dateien gelöscht werden sollen
Dabei werden nur die von Pinnacle Studio HD im Hintergrund erstellten Hilfsdateien gelöscht. Es werden keine Daten Ihres Projekts gelöscht. Gelöschte Hilfsdateien können jederzeit wiederhergestellt werden, indem das Projekt von Neuem gerendert wird. Wenn Sie alle Hilfsdateien komplett löschen möchten, dann können Sie den Inhalt des Ordners im Windows-Explorer löschen. Dann werden restlos alle Hilfsdateien von der Festplatte gelöscht.
295
Kapitel 14 – Projekte weitergeben, sichern und löschen
Nicht mehr gebrauchte Projekte löschen Wenn Sie ein Projekt komplett abgeschlossen haben und es auch später nicht mehr benötigen, können Sie es direkt über Pinnacle Studio HD löschen. Gehen Sie dazu wie folgt vor: 1. Klicken Sie im Menü Datei auf Projekte löschen.
Abbildung 14.18: Sie können Ihre Projekte direkt in Pinnacle Studio HD löschen
2. Klicken Sie eines der Projekte in der Liste an. 3. Löschen Sie das Projekt mit einem Klick auf Löschen. Achten Sie darauf, dass ein Projekt, das von Ihnen manuell auf der Festplatte verschoben wird, nicht mehr in dieser Liste erscheint. Sie sollten mit Projekten sehr vorsichtig umgehen.
296
15 Videoformate
In diesem Kapitel beschreibe ich einige Unterschiede der verschiedenen Dateiformate, die mit Pinnacle Studio HD erstellt werden können. Die folgenden Tabellen sollen Ihnen dazu eine Übersicht geben. Filme können auch in andere Formate als in die hier angegebenen exportiert werden. So können Sie z.B. Codecs aus dem Internet auf Ihren PC laden. Allerdings ist es nicht hundertprozentig sicher, ob diese Filme dann wieder in Pinnacle Studio HD bearbeitet oder auf einem PC abgespielt werden können, der nicht über eine entsprechende Abspielsoftware verfügt. Nachfolgender Screenshot zeigt die Warnung von Pinnacle Studio HD an, wenn alle Codecs, die auf dem PC installiert sind, angezeigt werden sollen.
Abbildung 15.1: Codec-Warnung
Sie können von den installierten Codecs Gebrauch machen, wenn Sie in den Einstellungen Benutzerdefiniert wählen und dann die Option Alle Codecs auflisten aktivieren.
297
Kapitel 15 – Videoformate
DV (AVI) Wenn Sie Videos mit einer DV-Kamera auf den PC überspielen, werden sie als sogenannte AVI-Dateien abgelegt. AVI ist ein Containerformat, das mit verschiedenen Videocodecs verwendet werden kann. AVI ist also kein eigentlicher Standard und muss nicht immer das Gleiche bedeuten. Eine AVI-Datei kann z.B. mit dem DivX- oder MPEG-4-Codec erstellt worden sein. Die Endung der Datei ist aber immer AVI. Beim Filmen mit einer MiniDV-Kamera werden die auf den PC übertragenen Daten im AVI-Format gespeichert. Diese Daten lassen sich digital über ein FireWire-Kabel auf den PC übertragen. Andere Videoschnittprogramme verwenden evtl. eigene Codecs, was oft dazu führt, dass AVI-Dateien nicht auf jedem PC gelesen und weiterverarbeitet werden können.
MPEG-Videoformat Bei diesem Format handelt es sich um stark komprimierte Daten. Es eignet sich besonders für das Verteilen von Videos als MPEG-1-Dateien oder im MPEG-2-Format auf DVDs. MPEG-1-Dateien sind auf jedem PC abspielbar, aber gegenüber MPEG-2 noch stärker komprimiert und ergeben ein etwas schlechteres Resultat. Eine Video-CD wird im MPEG-1-Format abgespeichert, eine Supervideo-CD und eine DVD im MPEG-2-Format. Eine Dual Layer DVD bietet doppelt so viel Platz wie eine herkömmliche DVD. Das heißt aber nicht, dass die Qualität doppelt so gut ist, sondern nur, dass doppelt so viel Video in DVD-Qualität aufgenommen werden kann. In Pinnacle Studio HD liegt die Standardqualität bei 720 x 576 Pixel mit einer Datenrate von 6000 KBits/s. Je nachdem, welche Kompression gewählt wird, hat auf einer DVD mehr oder weniger Video Platz. Die Kompression für eine DVD ist in jedem Fall gegenüber DV-Videomaterial 2,7-mal so hoch. DVD-Qualität ist also nie besser als eine Videoaufnahme von einem DV-Band. Die DVD-Qualität ist abhängig von der eingestellten Datenrate, d.h. davon, wie viel Informationen pro Sekunde verarbeitet bzw. gespeichert werden. Wie Sie gesehen haben, können Sie diesen Wert unter Datenrate beim DVD- oder MPEG-2-Export einstellen.
HDV, High Definition Seit der Erfindung des Fernsehens und der Videokamera hat sich in Sachen Qualität zwar viel getan, aber im Prinzip ist die Videogröße, in Pixel oder Bildzeilen ausgedrückt, bis heute nicht verbessert worden. Auf einer Mattscheibe werden viele kleine rote, grüne und blaue Punkte zu einem Bild zusammengefasst, und diese Bilder, von denen 25 Stück pro Sekunde gezeigt werden, erzeugen im menschlichen Auge den Eindruck von Bewegung. Wenn Sie die Entwicklung der digitalen Fotokameras verfolgt haben, wissen Sie vielleicht, dass die Bildqualität mit der Anzahl einzelner Bildpunkte, die aufgenommen werden können, steigt. Je höher die Auflösung ist, also je mehr Bildpunkte angezeigt werden, desto besser ist die Qualität. Eine MiniDV-Kamera zeichnet 576 Linien und 720 Pixel in der Breite auf, was 0,414 Megapixel entspricht. Dies wird Standardauflösung oder Standard Definition genannt. Nun liegt es doch auf der Hand, die Qualität zu verbessern, indem man diese Standardauflösung von 720 x 576 Pixeln einfach vergrößert und damit mehr Pixel für ein
298
HDV, High Definition Fernsehbild bzw. eine Videoaufnahme erhält. Es entstand die High-Definition VideoAuflösung. Die volle Auflösung von High Definition beträgt 1080 Linien mit 1920 Pixeln in der Breite. Was so einfach klingt, ist offenbar gar nicht so einfach zu realisieren, denn den HighDefinition-Standard gibt es nicht erst seit Kurzem, vielmehr wurde er bereits im Jahr 1964 definiert, wobei man damals allerdings noch keine Möglichkeit hatte, Bilder in High Definition zu übertragen und auszustrahlen, da dies eine viel schnellere Hardware vorausgesetzt hätte, wie wir sie erst heute haben. So wurden die ersten Übertragungstests für Satelliten erst 32 Jahre später, anno 1996, unternommen. Zwei Jahre später wurden dann in Nordamerika und Asien die ersten Satelliten aufgeschaltet. Im Herbst 2004 hat Sony die erste Videokamera mit einer Auflösung von 1080 Linien mit 1440 Bildpunkten in der Breite auf den Markt gebracht. Folgende Grafik zeigt Ihnen die Größenverhältnisse von Standard Definition und High Definition. Standard Definition ist heute nach wie vor aktuell, da die große Masse immer noch mit dieser Auflösung filmt. Der Trend geht aber eindeutig in Richtung High Definition. Stehen Sie vor der Neuanschaffung einer Videokamera, dann lohnt es sich auf jeden Fall, die Preise der High-Definition-Modelle zu vergleichen.
Abbildung 15.2: Größenverhältnisse von SDV mit 720 x 576 und HDV mit 1440 x 1080 Pixeln
Für High Definition haben sich bislang drei Formate durchgesetzt, die auch für Kameras gelten. 쐽 720/25p: Dieses Format zeichnet Video mit einer Auflösung von 720 Linien und 1280 Pixeln in der Breite auf. 25 steht für 25 Bilder pro Sekunde. P steht für progressive und bedeutet, dass pro Sekunde 25 Vollbilder aufgezeichnet werden. 쐽 1080i/50i: Dieses Format zeichnet Video mit einer Auflösung von 1080 Linien und 1440 Pixeln in der Breite auf. 50 steht für 50 Halbbilder pro Sekunde, wie sie ein normales TV-Gerät anzeigt. I steht für interlaced, was eben Halbbilder bedeutet. 쐽 Full HD: Dieses Format zeichnet Video mit einer Auflösung von 1080 Linien und 1920 Pixeln in der Breite auf. High Definition stellt von der Anzahl Pixel gegenüber SDV ein ca. fünfmal größeres Bild dar. Sie werden sich nun fragen, auf welches Medium High Definition aufgezeichnet wird. Es sind dies zum einen ganz normale MiniDV-Bänder wie für Standard Definition sowie Festplatten, Memory Sticks und Flashspeicher.
299
Kapitel 15 – Videoformate Als Nächstes stellt sich die Frage, wie viele Minuten auf ein solches Band aufgezeichnet werden können. Es sind ebenfalls 60 Minuten für ein einstündiges Band. High Definition Video wird im MPEG-2-Format aufgezeichnet und während der Aufnahme entsprechend komprimiert. Nur so ist es möglich, gleich viel Video auf ein MiniDV-Band aufzuzeichnen. Obwohl High Definition während der Aufzeichnung im MPEG-2-Format gespeichert wird, ist die Qualität gegenüber SDV viel besser. Die Bilder sind schärfer. Für das Bearbeiten von High Definition ist ein leistungsstarker PC notwendig. In Pinnacle Studio HD ist sogar eine Grafikkarte mit mindestens 256 MByte RAM erforderlich.
AVCHD AVCHD ist ein neues High-Definition-Format, das von Panasonic und Sony entwickelt wurde. AVCHD ist die Abkürzung für Advanced Video Codec High Definition, was auf Deutsch fortschrittliche Videocodierung mit hoher Auflösung bedeutet. Bei AVCHD werden die Videodaten im MPEG-4/H.264-Format codiert und von den entsprechenden Kameras auf DVDs, Memory Sticks, SD-Karten oder Festplatten gespeichert. Bluray-Abspielgeräte unterstützen das Format in der Regel. Die Bearbeitung von AVCHD-Video mit Studio HD Version 15 ist möglich, setzt aber voraus, dass der PC über entsprechende Ressourcen verfügt. Weitere Informationen zu den Systemvoraussetzungen finden Sie in Kapitel 1 „PC-Grundvoraussetzungen“. Falls Sie trotz eines schnellen PCs weiterhin Probleme mit dem Bearbeiten von AVCHD-Videoclips haben, können Sie die AVCHD-Dateien in MPEG-2 mit der gleichen Auflösung und größerer Datenrate umwandeln, damit die Videos nicht mehr so stark komprimiert sind. Die Dekomprimierung von AVCHD-Videodateien während des Bearbeitens benötigt enorm viel Leistung. Sind die Videoclips in MPEG-2 umgewandelt, sind die Daten weniger stark komprimiert und erfordern auch weniger PCLeistung. Wie Sie Ihre Videos in MPEG-2 umwandeln können, lesen Sie in Kapitel 16 „Tipps & Tricks“.
Vergleich der Formate Folgende Tabelle zeigt die Unterschiede der verschiedenen Formate im Vergleich zum Original (DV) und die entsprechende Dateigröße sowie die Abspielmöglichkeiten in einer Übersicht. Format
AVI (DV)
DivX
MPEG-1
MPEG2
Pixelgröße
720 x 576
1024 x 576
352 x 288
720 x 576 1280 x 720
Datenrate Mbps
25
0,1–8
1,15–4
6
Speicherbedarf/h
13 GByte
0,1–3,5 GByte 0,6–1,8 GByte 4,7 GByte 2,6 GByte
Speicherbedarf gegenüber DV
100 %
0,01–28 %
4,6–14 %
36 %
20 %
Abspieler
WMP
DivX
WMP
DVD
DVD
300
MPEG-2 HDV 720p
15
Vergleich der Formate
Format
MPEG-2 HDV 1080i
MPEG-4
MPEG-4
MPEG-4 HDV 720p
Pixelgröße
1440 x 720
128 x 96
704 x 576
1280 x 720
Datenrate Mbps
25
0,1–6
0,1–6
0,1–6
Speicherbedarf/h
2,9 GByte
0,1 GByte
2,6 GByte
2,6 GByte
Speicherbedarf gegenüber DV
22 %
0,8 %
20 %
20 %
Abspieler
DVD
DVD
DVD
DVD
Format
RealMedia
Windows Media
Windows Media HDV 1080i
3GPP
Pixelgröße
320 x 240
360 x 288
1440 x 1080
176 x 144
Datenrate Mbps
0,05–0,5
2
5
0,064
Speicherbedarf/h
0,02–0,2
0,37
2,2
0,03
Speicherbedarf gegenüber DV
0,15–1,5 %
2,8 %
17 %
0,23 %
Abspieler
RealPlayer
WMP
WMP
Handys/PDA
Tabelle 15.1: Vergleich der Export-Formate
WMP: Windows Media Player, DVD: DVD-Abspielsoftware wie z.B. Power DVD, DivX: DivX-Player Eine definitive Aussage über die Qualität kann hier nicht gemacht werden, da sie von Ursprungsqualität, Kompressionsart und Abspielgerät abhängt. Viel über die Qualität sagt die Dateigröße nach der Kompression aus. Das ist aber auch das wichtigste Argument bei einer Kompression, möglichst gute Qualität bei niedriger Dateigröße zu erzielen. Halten Sie sich immer diese Tabelle vor Augen, bevor Sie ein Format für Ihre Filme auswählen.
301
Kapitel 15 – Videoformate Folgende Tabelle erläutert die Anwendung der verschiedenen Formate. AVI (DV)
Volle Standard-Definition-Qualität, zum Archivieren von Material
DivX
Möglichst langes Video bei sehr guter Qualität
MPEG-1
Kann auf jedem PC und DVD-Player abgespielt werden, aber mangelhafte Qualität
MPEG-2
DVD und Filme in sehr guter Qualität, die auf DVD-Playern wiedergegeben werden können; auf PCs bietet DivX dieselbe Qualität bei geringerer Dateigröße. Mit MPEG-2 können Filme in Standard Definition und High Definition ausgegeben werden.
MPEG-2 TS
Dieses Format eignet sich, um ein erstelltes Video wieder zurück auf eine Videokamera zu spielen, die auf Festplatte oder Memory Chip aufgenommen hat. Zudem eignet sich dieses Format, um Filme in das Sony PS3Format zu speichern.
MPEG-4
Gutes Verhältnis von Dateigröße; DivX ist MPEG-4-kompatibel und normalerweise wird DivX wegen seiner Verbreitung eingesetzt. Die Filme werden aber in sehr stark komprimierter Version ausgegeben.
iPod-Kompatibel Hiermit erstellen Sie einen Film für iPod oder iPhone. MOV
MOV-Dateien im QuickTime-Format eignen sich fürs Internet oder für Macintosh-Nutzer. Für das Abspielen wird der QuickTime Player benötigt.
RealMedia
Internetstreaming und Web
Flash Video
Internetstreaming und Web
Windows Media
Internetstreaming und Web
3GP
Handys und PDAs
Tabelle 15.2: Export-Formate in Pinnacle Studio HD
302
16 Tipps & Tricks
AVCHD in MPEG-2 umwandeln Wenn Sie Probleme beim Bearbeiten von AVCHD-Videomaterial auf Ihrem PC haben, dann liegt das daran, dass der PC vermutlich zu sehr ausgelastet ist. Für das Bearbeiten von AVCHD ist ein relativ leistungsstarker PC notwendig. Sollten Sie aber trotz eines schnellen PCs immer noch an dessen Leistungsgrenzen stoßen oder möchten Sie HDVideos auf einem etwas langsameren PC bearbeiten, dann empfiehlt es sich, die AVCHDVideodateien zuerst in MPEG-2-Dateien umzuwandeln und dann diese zu bearbeiten. Die Umwandlung der Daten benötigt zwar Zeit, die Bearbeitung danach ist aber viel einfacher. Der Vorteil dabei ist, dass nach der Umwandlung die Filme weniger stark komprimiert sind, ein Qualitätsunterschied aber kaum oder gar nicht zu sehen ist. Nachfolgend zeige ich Ihnen, wie Sie die Auslastung Ihres PCs beim Bearbeiten von AVCHD überwachen können. Im zweiten Teil zeige ich Ihnen, wie Sie AVCHD-Videos umwandeln können.
PC-Auslastung überprüfen Sie können überprüfen, ob Ihr PC beim Arbeiten mit AVCHD überlastet ist, indem Sie den Task-Manager von Windows öffnen. Diesen können Sie mit der Tastenkombination (Strg)+(Alt)+(Entf) aufrufen. In Windows XP öffnet sich dann direkt der Task-Manager. In Windows Vista und Windows 7 müssen Sie noch zusätzlich den Task-Manager auswählen.
Abbildung 16.1: Im Register Leistung sehen Sie die Prozessorauslastung
303
Kapitel 16 – Tipps & Tricks Wenn Ihr PC im Ruhezustand ist, also keine Software im Hintergrund ausgeführt wird, dann sollte die CPU-Auslastung lediglich ein paar Prozent anzeigen. Wenn Sie aber AVCHD-Videos abspielen und dann die CPU-Auslastung betrachten, dann könnte es sein, dass diese bei 100 % steht.
Abbildung 16.2: Auf einem Intel Core 2 Duo mit 2,4 GHz ist beim Abspielen von AVCHD der Prozessor bis 100 % ausgelastet
Bei einem Intel Core 2 Duo-PC mit einem 2,4-GHz-Prozessor ist beim Abspielen von AVCHD mit Pinnacle Studio HD der Prozessor bis 100 % ausgelastet. Eigentlich würde der PC gerne mehr Leistung in Anspruch nehmen, aber über 100 % geht’s leider nicht. Darum beginnt an diesen Stellen das Video in Pinnacle Studio HD zu ruckeln, und ein Arbeiten wird sehr mühsam.
Abbildung 16.3: Nach der Umwandlung in MPEG-2 Full HD benötigt der gleiche PC lediglich zwischen 30 und 40 % an Leistung
Es könnte noch sein, dass eine Software im Hintergrund ausgeführt wird, die während der Arbeit nicht unbedingt benötigt wird, z.B. eine Virenscansoftware. Falls Sie diese Programme beenden und damit das Problem behoben wurde, hatten Sie Glück. Ansons-
304
AVCHD in MPEG-2 umwandeln ten gibt es zwei Möglichkeiten: das Video in MPEG-2 zu wandeln oder einen schnelleren PC zu kaufen. Wie Sie sehen, kann das Video nach der Umwandlung ohne Probleme auf meinem PC abgespielt werden und benötigt ca. 60 % weniger Leistung. Wie gesagt, das Video bleibt in Full High Definition, ist aber weniger stark komprimiert.
Filme konvertieren Die AVCHD-Videoaufnahmen können Sie ohne weitere Software direkt mit Pinnacle Studio HD umwandeln. Grundsätzlich ist dies aber auch mit einer anderen Software möglich. Wichtig ist einfach, dass bei der Umwandlung die Videos nicht stärker als nötig komprimiert und in ein schlechteres Format umgewandelt werden. Dadurch würden die Videos an Qualität verlieren, und dann macht es absolut keinen Sinn, diese weiterzuverarbeiten. Grundsätzlich ist das Vorgehen sehr einfach. Sie importieren die AVCHD-Videoclips von der Kamera oder dem Fotoapparat auf den PC. Ziehen Sie alle Clips ungeschnitten hintereinander auf die Timeline eines neuen, leeren Projekts. Dann exportieren Sie diesen ungeschnittenen Film in eine MPEG-2-Datei in der gleichen Auflösung wie das AVCHDVideomaterial, meistens in Full HD mit 1920 x 1080 Pixeln. Die soeben erstellte MPEG-2Datei wird dann in einem neuen, leeren Projekt ins Album geladen und weiterverarbeitet. Die AVCHD-Dateien der Kamera werden auf dem PC nicht mehr benötigt. Ich persönlich archiviere diese Daten auf externen Festplatten. Es kann ja gut sein, dass die AVCHD-Bearbeitung in ein paar Jahren kein Problem mehr darstellt. Nachfolgend sind die einzelnen Schritte nochmals ausführlich beschrieben. 1. Starten Sie Pinnacle Studio HD und erstellen Sie ein neues, leeres Projekt. 2. Übertragen Sie die AVCHD-Videodateien von der Kamera oder dem Fotoapparat auf die Festplatte des PCs. Dies können Sie mit Pinnacle Studio HD unter Importieren tun. 3. Selektieren Sie im Album alle Clips, die Sie später verarbeiten möchten, indem Sie mit der Maus einen Clip auswählen und dann aus dem Menü Bearbeiten/alles Auswählen oder (Strg)+(A) auf der Tastatur drücken. 4. Warten Sie, bis alle Clips ausgewählt sind. Dies kann bei sehr vielen Clips länger dauern. 5. Ziehen Sie nun einen der ausgewählten Clips auf die Timeline, um alle selektierten Clips zu verwenden. Die Clips sind nun ungeschnitten auf der Timeline. 6. Überprüfen Sie, ob die Timeline-Einstellungen der Auflösung Ihrer Videoclips entsprechen, indem Sie den Mauszeiger über den Projektnamen platzieren und warten, bis die Timeline-Einstellungen zu sehen sind. Falls die Timeline-Einstellungen nicht dem Format der Videos entsprechen, dann kann es sein, dass Sie die Einstellung der Timeline falsch gewählt haben. Wählen Sie aus dem Menü Setup die Projekt-Voreinstellungen aus und dort die Option Wie erster Clip unter Projektformat. Danach müssen Sie ein neues, leeres Projekt erstellen und alle Videoclips noch mal auf die Timeline legen.
305
Hinweis
Kapitel 16 – Tipps & Tricks
Abbildung 16.4: Die Clips werden im Album selektiert. Dies kann je nach Menge und Leistung des PCs etwas Zeit in Anspruch nehmen
Abbildung 16.5: Die Timeline-Einstellungen sollten dem Format der Videos entsprechen
7. Klicken Sie auf Film erstellen, um die Clips in MPEG-2 umzuwandeln. 8. Wählen Sie auf der linken Seite Datei und als Dateityp MPEG-2 aus. Hinweis
Bei AVCHD handelt es sich meistens um Full-High-Definition-Videoclips mit einer Auflösung von 1920 x 1080 Pixeln. Unter Voreinstellung müssen Sie nun die Pixelauflösung, die Anzahl der Bilder pro Sekunde, Halb- oder Vollbilder und die Datenrate, mit der die Videos in MPEG-2 umgewandelt werden sollen, auswählen. Welche MPEG-2-Einstellung Sie schlussendlich verwenden, ist abhängig von dem Videomaterial, das Sie auf der Timeline abgelegt haben. Hier empfiehlt es sich, die gleiche Pixelauflösung und die gleiche Anzahl Bilder pro Sekunde zu verwenden wie beim Originalmaterial auf der Timeline. Die Video- und Audiodetails der entsprechenden Voreinstellung sehen Sie jederzeit unter Einstellungen auf der rechten Seite, wie in Abbildung 15.6 zu sehen ist.
306
AVCHD in MPEG-2 umwandeln
Abbildung 16.6: Unter Voreinstellung wird die entsprechende Qualität ausgewählt
9. Wählen Sie nun unter Voreinstellung aus, in welcher Qualität die AVCHD-Dateien in MPEG-2 konvertiert werden sollen. Die folgende Tabelle listet die Voreinstellungen von MPEG-2 auf und soll Ihnen helfen, die richtige zu finden. Falls Sie nicht wissen, in welcher Pixelauflösung und mit wie vielen Bildern pro Sekunde Ihre Kamera die Videoclips aufzeichnet, sollten Sie das Kamerahandbuch zur Hilfe nehmen oder beim Hersteller nachfragen. Voreinstellung
Auflösung in Pixel
Anzahl Bilder bzw. Bemerkung Frames pro Sekunde
DVD-kompatibel
720 x 576
50 Halbbilder bzw. 25 Bilder pro Sekunde
DVD-Qualität in Standard Definition. Dieses Format ist nicht mehr HD und eignet sich nicht zur Weiterverarbeitung.
SVCD-kompatibel
480 x 576
50 Halbbilder bzw. 25 Bilder pro Sekunde
Sehr starke Kompression. Auflösung ist kleiner als SD. Eignet sich nicht zur Weiterverarbeitung.
HD 720p
1280 x 720
25 Vollbilder
High Definition mit 25 Vollbildern. Datenrate bei 15 MBits/s.
HDV2 1080i
1440 x 1080
50 Halbbilder bzw. 25 Bilder pro Sekunde
High Definition mit hoher Datenrate (25 MBit/s), aber nicht Full HD.
Tabelle 16.1: MPEG-2-Voreinstellungen in Pinnacle Studio HD
307
Kapitel 16 – Tipps & Tricks Voreinstellung
Auflösung in Pixel
Anzahl Bilder bzw. Bemerkung Frames pro Sekunde
HD 1080i
1920 x 1080
50 Halbbilder bzw. 25 Bilder pro Sekunde
Full-HD-Auflösung mit einer Datenrate von 30 MBit/s. Bevorzugtes Format für AVCHD in Full HD und 50 Halbbilder.
HD 1080p
1920 x 1080
25 Vollbilder
Full-HD-Auflösung mit 30 MBit/s. Geeignet für Vollbildaufnahmen.
HD 1080/24p
1920 x 1080
24 Vollbilder
Full-HD-Auflösung mit 30 MBit/s. Geeignet für Aufnahmen mit 24 Vollbildern pro Sekunde.
Tabelle 16.1: MPEG-2-Voreinstellungen in Pinnacle Studio HD (Forts.)
10. Klicken Sie auf Datei erstellen. 11. Wählen Sie einen Speicherort auf der Festplatte aus, an dem die MPEG-2-Datei gespeichert werden soll, und benennen Sie die zu exportierende Datei unter Dateiname. Wählen Sie hier einen sinnvollen Namen, damit Sie später die Dateien wiedererkennen können.
Abbildung 16.7: Wählen Sie einen Speicherort und einen Dateinamen für die MPEG-2-Datei aus
12. Klicken Sie auf Speichern, um die AVCHD-Videodateien in MPEG-2 zu konvertieren. Der Exportvorgang wird gestartet und das Video wird im MPEG-2-Format auf die Festplatte gespeichert. Dieser Vorgang kann einige Zeit in Anspruch nehmen, je nach-
308
AVCHD in MPEG-2 umwandeln dem, wie leistungsstark Ihr PC ist und wie viel Rohmaterial Sie auf der Timeline abgelegt haben. Zudem wird der PC sehr stark ausgelastet sein.
Abbildung 16.8: Der Exportvorgang wird gestartet und das Video in MPEG-2 konvertiert
Bei erfolgreichem Exportvorgang ertönt ein Audiosignal, und es erscheint die Meldung Filmerstellung abgeschlossen.
Abbildung 16.9: Nach erfolgreichem Exportvorgang erscheint die Meldung Filmerstellung abgeschlossen
13. Wechseln Sie nun wieder zum Schritt 2 Bearbeiten. 14. Erstellen Sie ein neues, leeres Projekt im Menü Datei/Neues Projekt, um mit der Bearbeitung des umgewandelten MPEG-2-Videos zu beginnen. Das geöffnete Projekt müssen Sie nicht speichern, da dies nur temporär zur Umwandlung genutzt wurde. Nun dürfen Sie aber nicht die im Album angezeigten AVCHD-Videoclips auf die Timeline legen, sondern müssen zuerst die zuvor erstellte MPEG-2-Datei ins Album laden. 15. Klicken Sie im Album auf das Ordnersymbol Videodateien aus einem anderen Verzeichnis auswählen.
Abbildung 16.10: Laden Sie nun die soeben erstellte MPEG-2-Datei ins Album
309
Kapitel 16 – Tipps & Tricks 16. Suchen Sie im Öffnen-Dialog die MPEG-2-Datei aus und klicken Sie dann auf Öffnen.
Abbildung 16.11: Wählen Sie die MPEG-2-Datei aus, um diese ins Album zu laden
Die automatische Szenenerkennung wird gestartet und analysiert die MPEG-2-Datei. Dabei werden wieder die einzelnen Szenen im Album angezeigt.
Abbildung 16.12: Die Szenenerkennung wird automatisch gestartet
Dieser Vorgang kann unter Umständen einige Zeit in Anspruch nehmen, je nachdem, wie lange das MPEG-2-Video dauert. Sobald der Vorgang abgeschlossen ist, sind wieder die gleichen Szenen im Album verfügbar wie bei den AVCHD-Clips, und Sie können nun mit der Videobearbeitung beginnen.
Miniatur-Vorschaubild ändern Videoclips, die in die Timeline eingefügt sind, erhalten ein Miniatur-Vorschaubild, damit Sie während des Bearbeitens schneller sehen, was sich hinter einem Videoclip verbirgt. Unter Umständen kann es aber sein, dass das Vorschaubild auf der Timeline nicht das zeigt, was später im Clip zu sehen ist, wie in Abbildung 15.13.
310
Szenen und Bilder im Album suchen
Abbildung 16.13: Die Miniatur-Ansicht auf der Timeline entspricht nicht dem Videoclipinhalt
Sie können das Miniaturbild jedes Clips auf der Timeline oder im Album ändern, indem Sie wie folgt vorgehen. 1. Markieren Sie einen Videoclip mit der Maus im Album oder auf der Timeline. 2. Platzieren Sie den Timeline-Scrubber im Videoclip an die Stelle, von der Sie das Vorschaubild übernehmen möchten. 3. Klicken Sie mit der rechten Maustaste auf den Clip und wählen Sie Miniatur einrichten.
Abbildung 16.14: Mit Miniatur einrichten können Sie das Miniaturbild eines Clips ändern
Szenen und Bilder im Album suchen Bilder und Videos, die Sie auf der Timeline verwendet haben, müssen nicht mehr unbedingt im Album angezeigt werden. Sobald Sie andere Clips ins Album laden, sind die verwendeten im Album nicht mehr ersichtlich. Sie können aber die Clips und Fotos mit einem Mausklick wieder automatisch ins Album laden, ohne dass Sie wissen müssen, wo diese auf der Festplatte gespeichert sind. Gehen Sie dazu wie folgt vor: 1. Wählen Sie einen Clip oder ein Foto auf der Timeline an. 2. Klicken Sie mit der rechten Maustaste auf den Clip.
311
Kapitel 16 – Tipps & Tricks
Abbildung 16.15: Clips oder Bilder können mit Szene im Album suchen ins Album geladen und markiert werden
3. Wählen Sie für Videos Szene im Album suchen und für Fotos Bild im Album suchen. Danach wird die gesuchte Szene oder das gesuchte Bild ins Album geladen und markiert.
Szenen und Bilder im Projekt suchen Für jeden Videoclip oder für jedes Foto, das Sie aus dem Album in die Timeline gezogen haben, erhält der Clip oder das Foto ein kleines Häkchen, um anzuzeigen, dass dieser Clip bereits im Film verwendet wurde. Wenn Sie wissen möchten, wo auf der Timeline ein Videoclip oder ein Foto verwendet wurde, können Sie dieses wie folgt auf der Timeline markieren lassen. 1. Wählen Sie im Album einen Videoclip oder ein Foto aus, das Sie in der Timeline suchen. 2. Klicken Sie mit der rechten Maustaste auf den Clip oder das Foto.
Abbildung 16.16: Wählen Sie Szene im Projekt suchen, um einen Clip oder ein Foto in der Timeline zu finden
3. Wählen Sie Szene im Projekt suchen, um das Video oder das Foto in der Timeline zu markieren. Der gesuchte Clip wird auf der Timeline von Pinnacle Studio HD markiert.
Abbildung 16.17: Der gewählte Clip wird auf der Timeline ausgewählt
312
Content-Ordner öffnen
Content-Ordner öffnen Wenn Sie Videos oder Fotos in Ihrem Projekt verwendet haben und nicht mehr wissen, wo diese auf der Festplatte gespeichert sind, können Sie den Ordner mit den Clips direkt aus Pinnacle Studio HD öffnen. Gehen Sie dazu wie folgt vor: 1. Klicken Sie mit der rechten Maustaste auf einen Clip oder ein Bild im Album. 2. Wählen Sie aus der Liste Content-Ordner öffnen aus.
Abbildung 16.18: Mit Content-Ordner öffnen können die Daten im Windows-Explorer angezeigt werden
Der Windows-Explorer startet und öffnet den Ordner, in welchem das zuvor gewählte Bild oder Video angezeigt wird.
Bild drehen Bilder oder Grafiken können direkt im Album von Pinnacle Studio HD gedreht werden, falls diese falsch dargestellt werden. Gehen Sie dazu wie folgt vor: 1. Klicken Sie mit der rechten Maustaste im Album auf das Bild, das Sie drehen möchten. 2. Wählen Sie im Kontextmenü Original drehen.
Abbildung 16.19: Bilder können direkt im Album gedreht werden
3. Wählen Sie nun Im Uhrzeigersinn oder Gegen Uhrzeigersinn aus.
313
Kapitel 16 – Tipps & Tricks
Effekte in Studio HD übernehmen Wenn Sie Pinnacle Studio HD Version 15 als Upgrade auf Ihrem PC installieren und Bonus-Inhalte wie Effekte, Disc-Menü- und Titelvorlagen usw. einer Version 10 und 11 übernehmen möchten, dann sollten Sie die Software Content-Transfer von Pinnacle ausführen. Inhalte einer Version 12 und 14 werden bei der Installation von Studio HD Version 15 automatisch übernommen. Das Ausführen des Content-Transfers ist nicht notwendig. Gehen Sie wie folgt vor, um Inhalte der Version 10 und 11 in Studio HD Version 15 zu übernehmen. 1. Starten Sie das Tool Content-Transfer, indem Sie in Windows Start/Programme/Pinnacle Studio 15/Tools/Übertrage Content wählen.
Abbildung 16.20: Der Pinnacle Content-Transfer-Assistent
2. Klicken Sie auf Weiter, um die Effekte in Pinnacle Studio HD zu übernehmen. Wenn Sie zusätzliche Effekte usw. für Pinnacle Studio HD installieren möchten, von denen Sie Installations-CDs oder -DVDs besitzen, müssen Sie den Computer zuerst mit dem Content-Transfer einrichten, damit diese installiert werden können. 3. Starten Sie also noch mal den Pinnacle Content-Transfer-Assistent mit Start/Programme/Pinnacle Studio 15/Tools/Übertrage Content. 4. Klicken Sie auf Weiter. 5. Wählen Sie die Option Ja. 6. Wählen Sie nun die Vorgängerversion von Pinnacle Studio HD, für welche Sie Inhalte haben, und klicken Sie dann auf Weiter. 7. Installieren Sie alle Effekte und Bonus-CDs bzw. -DVDs.
314
Effekte in Studio HD übernehmen 8. Starten Sie erneut den Pinnacle Content-Transfer-Assistent mit Start/Programme/ Pinnacle Studio 15/Tools/Übertrage Content, um die Effekte in Pinnacle Studio HD zu übernehmen.
Abbildung 16.21: Der Content-Transfer hat Inhalte aus früheren Studio-Versionen gefunden
Abbildung 16.22: Die Übertragung startet automatisch, wenn genügend Platz auf der Festplatte vorhanden ist
315
Kapitel 16 – Tipps & Tricks
Abbildung 16.23: Der Assistent hat nun den PC für die Installation eingerichtet
9. Klicken Sie auf Fertig stellen, um den Assistenten zu beenden. Die übertragenen Inhalte sind nun in Studio HD Version 15 verfügbar.
Tastenkürzel Die folgenden Tastenkürzel sollen Ihnen helfen, gewisse Befehle direkt über die Tastatur auszuführen, ohne dass Sie das Menü öffnen oder mit der Maustaste klicken müssen.
Allgemeine Tastenkürzel Tastenkombination
Befehl
(Strg)+(N)
Neues Projekt (Hauptoberfläche) oder Titel
(Strg)+(O)
Projekt oder Titel öffnen
(Strg)+(S)
Projekt oder Titel speichern
(Strg)+(Z)
Rückgängig
(Strg)+(Y)
Wiederholen
(Strg)+(A)
Alles auswählen
(Strg)+(C)
In die Zwischenablage kopieren
(Strg)+(V)
Aus der Zwischenablage einfügen
(Strg)+(X)
In die Zwischenablage ausschneiden
Tabelle 16.2: Allgemeine Tastenkürzel
316
Tastenkürzel Tastenkombination
Befehl
(Strg)+(B)
Fett/Nicht fett
(Strg)+(I)
Kursiv/Nicht kursiv
(Strg)+(U)
Unterstrichen/Nicht unterstrichen
(Entf)
Löschen ohne Kopie in die Zwischenablage
Tabelle 16.2: Allgemeine Tastenkürzel (Forts.)
Studio Benutzeroberfläche Tastenkombination
Befehl
(Leertaste)
Wiedergabe und Stopp
(J)
Schneller Rücklauf (wiederholtes Drücken beschleunigt den Rücklauf)
(K)
Wiedergabe anhalten
(L)
Schneller Vorlauf (mehrmaliges Drücken für schnellere Wiedergabe)
(X) oder (Strg)+(½)
Ein Bild vor
(Y) oder(Strg)+(¼)
Ein Bild zurück
(A) oder (I)
Eingangsmarkierung
(S) oder (O)
Ausgangsmarkierung
(Strg)+(æ)
Trimmpunkt (Anfang) – ein Bild
(Strg)+(Æ)
Trimmpunkt (Anfang) + ein Bild
(Alt)+(æ)
Trimmpunkt (Ende) – ein Bild
(Alt)+(Æ)
Trimmpunkt (Ende) + ein Bild
(Alt)+(Strg)+(æ)
Roll-Trimmpunkt (Ende) – ein Bild (nächsten Clip ebenfalls trimmen)
(Alt)+(Strg)+(Æ)
Roll-Trimmpunkt (Ende) + ein Bild
(G)
Eingangs- und Ausgangsmarke löschen
(D)
Gehe zu Eingangsmarke (im Trimm-Tool)
(F)
Gehe zu Ausgangsmarke (im Trimm-Tool)
(E) oder (Pos1)
Zurück an den Anfang
(R) oder (Ende)
Gehe ans Ende
(æ)
Vorherigen Clip auswählen
(Æ)
Nächsten Clip auswählen
(Entf)
Ausgewählte(n) Clip(s) löschen
(Einf)
Clip an Schiebereglerposition teilen
(Strg)+(Entf)
Clip löschen und Lücke in der Timeline (Videospur) schließen; Lücke in der Timeline (andere Spuren) beibehalten
(Bild-Auf)
Zur nächsten Seite im Filmfenster
(Bild-Ab)
Zur vorherigen Seite im Filmfenster
(Nummernfeld) (+)
Timeline vergrößern (Zoom in)
Tabelle 16.3: Allgemeine Tastenkombinationen
317
Kapitel 16 – Tipps & Tricks Tastenkombination
Befehl
(Nummernfeld) (–)
Timeline verkleinern (Zoom out)
(C)
Menükapitel festlegen
(V)
Menükapitel löschen
(M)
Zurück zum Menü festlegen
(Strg)+(Bild-Auf)
Zurück zum vorherigen Menükapitel
(Strg)+(Bild-Ab)
Gehe zum nächsten Menükapitel
(Strg)+(E)
Alle Effekte im Timeline-Clip kopieren
(Strg)+(D)
Effekte in Timeline-Clip einfügen
(Strg)+(F)
Effekte-Tool öffnen
Tabelle 16.3: Allgemeine Tastenkombinationen (Forts.)
Motion-Titeleditor Tastenkombination
Befehl
(F11)
Abbrechen (Editor für Titel beenden)
(F12)
Bestätigen (Editor für Titel beenden)
(Alt)+(Plus)
In den Vordergrund
(Alt)+(Minus)
In den Hintergrund
(Strg)+(Plus)
Eine Ebene nach vorne
(Strg)+(Minus)
Eine Ebene nach hinten
(Strg)+(Punkt)
Größere Schrift
(Strg)+(Komma)
Kleinere Schrift
(Strg)+(D)
Alles abwählen
(Leertaste)
Mit dem Mauszeiger im Timeline-Bereich: Wiedergabe starten und anhalten
Tabelle 16.4: Motion-Titeleditor Tastenkombinationen
Titeleditor Tastenkombination
Befehl
(F11)
Abbrechen (Editor für Titel beenden)
(F12)
Bestätigen (Editor für Titel beenden)
(Alt)+(Plus)
In den Vordergrund
(Alt)+(Minus)
In den Hintergrund
(Strg)+(Plus)
Eine Ebene vor
(Strg)+(Minus)
Eine Ebene zurück
(Strg)+(0)
Textausrichtung aus
Tabelle 16.5: Titel-Editor Tastenkombinationen
318
Mehrere Fotos miteinander verlängern/verkürzen Tastenkombination
Befehl
(Strg)+(1)
Textausrichtung: unten links
(Strg)+(2)
Textausrichtung: unten Mitte
(Strg)+(3)
Textausrichtung: unten rechts
(Strg)+(4)
Textausrichtung: Mitte links
(Strg)+(5)
Textausrichtung: Mitte Mitte
(Strg)+(6)
Textausrichtung: Mitte rechts
(Strg)+(7)
Textausrichtung: oben links
(Strg)+(8)
Textausrichtung: oben Mitte
(Strg)+(9)
Textausrichtung: oben rechts
(Strg)+(K)
Unterschneiden, Abstand ändern, Schrägstellen
(Strg)+(M)
Verschieben, Skalieren und Drehen
(ª)+(æ)
Zeichenauswahl nach links erweitern
(ª)+(Æ)
Zeichenauswahl nach rechts erweitern
(Strg)+(æ)
Textauswahl horizontal stauchen oder quetschen (unterschneiden), je nach aktuellem Bearbeitungsmodus (Verschieben/Skalieren/ Rotieren oder Unterschneiden/Schrägstellen/Abstand ändern)
(Strg)+(Æ)
Textauswahl horizontal strecken oder unterschneiden
(Strg)+(¼)
Größe oder Abstand der Textauswahl reduzieren, je nach aktuellem Bearbeitungsmodus
(Strg)+(½)
Größe oder Abstand der Textauswahl erhöhen
(ª)+(Strg)+(æ)
Wie (Strg)+(æ) in größeren Schritten
(ª)+(Strg)+(Æ)
Wie (Strg)+(Æ) in größeren Schritten
(ª)+(Strg)+(¼)
Wie (Strg)+(Pfeil_unten) in größeren Schritten
(ª)+(Strg)+(Æ)
Wie (Strg)+(Pfeil_oben) in größeren Schritten
(Alt)+(æ)
In Textauswahl: Zeichen nach links verschieben. Keine Auswahl: Text zwischen Einfügemarke und Zeilenende nach links verschieben
(Alt)+(Æ)
In Textauswahl: Zeichen nach rechts verschieben. Keine Auswahl: Text zwischen Einfügemarke und Zeilenende nach rechts verschieben
(ª)+(Alt)+(æ)
Wie (Alt)+(æ) in größeren Schritten
(ª)+(Alt)+(Æ)
Wie (Alt)+(Æ) in größeren Schritten
Tabelle 16.5: Titel-Editor Tastenkombinationen (Forts.)
Mehrere Fotos miteinander verlängern/ verkürzen Wenn Sie mit Pinnacle Studio HD eine Diashow erstellen, kann es sein, dass Sie viele Fotos auf die Timeline gelegt haben und zu einem späteren Zeitpunkt alle Clips verlängern möchten. Wenn jedes Bild einzeln verlängert werden müsste, wäre dies sehr viel Arbeit. Gehen Sie also wie folgt vor, um mehrere Fotos gleichzeitig zu verlängern:
319
Kapitel 16 – Tipps & Tricks 1. Doppelklicken Sie mit der Maus auf eines der Fotos, das verlängert oder verkürzt werden soll. Dabei öffnet sich die Video-Toolbox in den Clipeigenschaften.
Abbildung 16.24: Clipeigenschaften in der Video-Toolbox
2. Selektieren Sie alle Fotos auf der Timeline, die verlängert werden sollen, indem Sie das erste Foto mit der Maus anklicken, (ª) drücken und gedrückt halten und dann mit der rechten Maustaste das letzte Foto auswählen. 3. Verändern Sie nun mit der Maus die Länge aller Clips, indem Sie auf die kleinen Pfeilsymbole klicken: Pfeil nach oben verlängert die Fotos und Pfeil nach unten verkürzt sie.
Abbildung 16.25: Verändern Sie die Länge, indem Sie mit den Pfeilen die Dauer anpassen
Video rückwärts laufen lassen 1. Wählen Sie den Videoclip mit der Maus auf der Timeline an, den Sie rückwärts laufen lassen möchten. 2. Wählen Sie aus dem Menü Toolbox den Eintrag Videoeffekte hinzufügen.
Abbildung 16.26: Wählen Sie den Effekt Geschwindigkeit aus
320
Grafiken mit Transparenz 3. Klicken Sie auf OK, um den gewählten Effekt anzuwenden.
Abbildung 16.27: Den Effekt Geschwindigkeit anpassen
4. Wählen Sie die Option Rückwärts. Der Videoclip wird nun rückwärts wiedergegeben.
Grafiken mit Transparenz Wenn Sie z.B. im Film ein Logo eingeblendet haben möchten, das gewisse Teile transparent darstellt, ist es am sinnvollsten, Sie erstellen diese Grafik in einem Grafikbearbeitungsprogramm und definieren dort die Transparenzen als Alphakanal oder füllen den transparenten Bereich mit einer neutralen Farbe, die sonst im Bild nicht vorkommt. Speichern Sie dann das Bild im Targa- oder Tiff-Format ab. Erstellen Sie als Erstes in einem Grafikprogramm wie z.B. Adobe Photoshop das Logo oder die Grafik, die im Video eingeblendet werden soll.
Abbildung 16.28: Logo oder Grafik mit Transparenz
Das Schachbrettmuster im Hintergrund bedeutet, dass dieser Bereich transparent bzw. durchsichtig angezeigt wird. Sie können den transparenten Bereich mit einer neutralen Farbe füllen, die in der Grafik nicht vorkommt. Im Beispiel ist das runde Logo rot, der Hintergrund grün.
321
Kapitel 16 – Tipps & Tricks
Abbildung 16.29: Logo mit neutralem Farbhintergrund
1. Laden Sie die Grafik in Studio HD und legen Sie sie auf die gewünschte Spur, z.B. die Titelspur.
Abbildung 16.30: Logo oder Grafik auf der Titelspur
2. Selektieren Sie die Logo-Grafik mit grünem Hintergrund und öffnen Sie die VideoToolbox und dann Videoeffekte. 3. Wählen Sie unter Kategorie Studio HD-RTFx und dann unter Effekt Chroma-Key aus und klicken Sie auf OK.
Abbildung 16.31: Wählen Sie den Effekt Chroma-Key aus
4. Klicken Sie mit der Maus auf das kleine Pipettensymbol und wählen Sie im Vorschaufenster die neutrale Farbe aus. Im Beispiel ist es Grün.
322
Grafiken mit Transparenz
Abbildung 16.32: Wählen Sie mit der Pipette die Farbe aus, die transparent dargestellt werden soll
5. Klicken Sie auf Effekt hinzufügen, um die Logo-Grafik zu verkleinern und zu positionieren. 6. Wählen Sie den Bild-in-Bild-Effekt aus und klicken Sie auf OK.
Abbildung 16.33: Wählen Sie den Effekt Bild-in-Bild aus, um die Logo-Grafik zu positionieren
Abbildung 16.34: Verschieben Sie die Grafik durch Verändern der Parameter
7. Positionieren Sie die Grafik, indem Sie die horizontale und vertikale Ausrichtung anpassen.
323
Kapitel 16 – Tipps & Tricks
Abbildung 16.35: Falls Bereiche im Bild stören, können diese mit Cropping entfernt werden
8. Falls Bereiche im Bild stören, können diese mit den Zuschneiden-Einstellungen entfernt werden. Verändern Sie also die Werte unter Zuschneiden, bis nur noch das Logo zu sehen ist.
Abbildung 16.36: Mit Zuschneiden können Bereiche rund um das Logo entfernt werden
Texte ausrichten im Titelgenerator und Disc-Menü-Editor Wenn Sie mehrere Texte oder Grafikobjekte in einem Titel oder DVD-Menü miteinander ausrichten möchten, bietet Studio HD ein Werkzeug, mit dem dies sehr einfach erledigt werden kann. 1. Öffnen Sie den Titelgenerator oder DVD-Menü-Editor und erstellen Sie Ihre Textzeilen. Da diese dann meistens nicht genau oder schön ausgerichtet sind, müssen sie manuell nachbearbeitet werden. 2. Wählen Sie alle Textelemente mit der Maus aus und halten Sie dabei (Strg) gedrückt.
324
Texte ausrichten im Titelgenerator und Disc-Menü-Editor
Abbildung 16.37: Die Textzeilen sollen alle ausgerichtet werden
3. Klicken Sie das Symbol Ausrichten an, um sich alle Möglichkeiten anzeigen zu lassen. Die oberen drei Optionen richten die Textelemente horizontal linksbündig, zentriert und rechtsbündig aus. Die nächsten drei richten die Elemente vertikal oben, mittig und unten aus. In unserem Beispiel sollen die Textelemente horizontal linksbündig ausgerichtet werden.
Abbildung 16.38: Hinter dem Symbol Ausrichten verbergen sich sämtliche Ausrichtungsoptionen
4. Wählen Sie nun die Ausrichtung aus, damit die Elemente schön dargestellt werden. Im Beispiel wird die oberste Ausrichtung, Nach links ausrichten, gewählt. 5. Die vertikalen Abstände der Textelemente sollen auch noch angepasst werden. Klicken Sie dazu erneut auf den Ausrichten-Button und wählen Sie für das Beispiel Gleicher Abstand unten, um die Elemente gleichmäßig im Abstand auszurichten.
325
Kapitel 16 – Tipps & Tricks
Abbildung 16.39: Die Textelemente sind nun linksbündig ausgerichtet
Abbildung 16.40: Die Textelemente sind nun schön ausgerichtet
Abbildung 16.41: Nach der Wahl der Ausrichten-Option werden die Bilder alle gleich groß dargestellt
326
Stand- und Rolltitel gleichzeitig Die untersten drei Einstellungen des Ausrichten-Werkzeugs dienen dazu, Elemente gleich breit, hoch oder groß zu machen. Dies ist bei Grafiken am ehesten sinnvoll. Wählen Sie einfach die Grafiken aus, die die gleiche Größe erhalten sollen, und aktivieren Sie dann die entsprechende Einstellung im Ausrichten-Werkzeug.
Stand- und Rolltitel gleichzeitig Mit der zweiten Videospur können Sie zwei Titel gleichzeitig anzeigen lassen, wobei der eine sich bewegt und der zweite stehen bleibt. Dazu wird die zweite Videospur benötigt. 1. Setzen Sie als Erstes einen Videoclip oder ein Foto auf die erste Videospur, die als Hintergrund für die Titel zu sehen sein soll. 2. Erstellen Sie den ersten Titel, indem Sie im Menü Toolbox den Eintrag Titel erstellen wählen. Klicken Sie dann auf Overlaytitel, um den Titel-Editor zu öffnen. Hier spielt es keine Rolle, ob Sie einen Standard- oder Motion-Titel erstellen. 3. Erstellen Sie Ihren Titel und schließen Sie den Titelgenerator wieder mit einem Klick auf OK. 4. Erstellen Sie einen zweiten Titel und wählen Sie als Titeltyp Vollbildtitel. Auch hier spielt es keine Rolle, ob Sie einen Standard- oder Motion-Titel erstellen. Schreiben Sie Ihren Text in den Titel und beenden Sie den Titelgenerator wieder mit einem Klick auf OK. Nun haben Sie einen Titel auf der ersten Videospur und einen zweiten auf der Titelspur.
Abbildung 16.42: Die beiden Titel auf der ersten und zweiten Videospur
5. Platzieren Sie einen beliebigen Videoclip auf die Titelspur, damit die zweite Videospur zu sehen ist. Nun können Sie die beiden Titel auf der zweiten Videospur und auf der Titelspur so platzieren, wie Sie möchten. Falls Sie den Videoclip nicht mehr benötigen, können Sie ihn auf der zweiten Videospur wieder löschen. Nun könnten die Titel so animiert werden, dass der eine von unten nach oben und der andere von oben nach unten rollt. Dazu müssen Sie wie folgt vorgehen: 6. Wählen Sie den ersten Titel aus und öffnen Sie in der Video-Toolbox die Videoeffekte, indem Sie im Menü Toolbox den Eintrag Videoeffekt hinzufügen wählen.
327
Kapitel 16 – Tipps & Tricks
Abbildung 16.43: Nun sind beide Titel übereinander
7. Wählen Sie unter Kategorie Studio Ultimate RTFx und dann unter Effekt 2D-Editor aus. 8. Aktivieren Sie die Option Keyframes verwenden und setzen Sie den Timeline-Scrubber an die Position des ersten Keyframes.
Abbildung 16.44: Die Option Keyframes verwenden wählen und den Timeline-Schieberegler zum ersten Keyframe bewegen
9. Verändern Sie den vertikalen Wert so, dass der Titel entweder nach oben oder nach unten aus dem Bild verschwindet. 10. Springen Sie mit dem Timeline-Schieberegler zum zweiten Keyframe und verschieben Sie die vertikale Position entsprechend nach unten bzw. nach oben, sodass der Titel wieder aus dem Bild verschwindet.
328
Tipps und Tricks für Fortgeschrittene 11. Wenden Sie diesen Effekt gegengleich für den zweiten Titel an, wenn Sie wünschen. Nach dem Abspielen des Videos bewegen sich die Titel gegeneinander.
Tipps und Tricks für Fortgeschrittene Audioeffekte für Fortgeschrittene mit VST Plugins Pinnacle Studio unterstützt eine offene Programmierschnittstelle für Audio-Plug-ins, die VST (Virtual Studio Technology). Dabei handelt es sich um eine Programmierschnittstelle, mit der Audiofilter, Instrumente und Effekte programmiert und in Studio weiterverwendet werden können. Dies können Sie sich als Pinnacle Studio-Benutzer zunutze machen, denn es gibt im Internet viele kostenlose sogenannte VST Plugins. Was Sie damit jeweils machen können, müssen Sie vom Hersteller erfahren. Kostenpflichtige Audiofilter und Effekte lassen sich ebenfalls integrieren. Sie könnten für VST Plugins mehrere Tausend Euro ausgeben, ob das für Pinnacle Studio Sinn macht, ist eine andere Frage. Ich zeige Ihnen in diesem Abschnitt, wie Sie kostenlose VST Plugins im Internet finden, installieren und nutzen können. Grundsätzlich können Sie alle VST Plugins verwenden, Sie müssen also bei der Suche nach Plugins nicht speziell nach Pinnacle Studio-kompatible Plugins suchen. Es gibt viele VST Plugins für Musiker, die virtuelle Instrumente in einer Musik- bzw. Audiosoftware erzeugen. Diese sind aber für Pinnacle Studio nicht geeignet, da Sie keine Musik komponieren, sondern eher bestehendes Audio, z.B. eines Videoclips, verbessern oder verfremden möchten.
VST Plug-ins im Internet finden Bei der Suche nach Plug-ins ist die Suchmaschine www.google.de eine große Hilfe. Durch Eingabe des Suchbegriffs Kostenlose VST Plugins werden über 800 000 Suchresultate angegeben. Ob nun alle Sinn machen und auch verwendet werden können, ist allerdings die andere Frage. Ebenfalls stellt sich die Frage, wie gut ein Plug-in ist. Wie gut ein Plugin programmiert ist und wie viel Sinn es macht, dieses oder jenes zu verwenden, ist Glückssache, oder Sie verlassen sich auf andere Anwender, die die betreffenden Plug-ins schon ausprobiert haben. Ebenfalls ist es sinnvoll, wenn Sie zum gewünschten Plug-in auch eine Beschreibung oder Erklärung erhalten, damit Sie wissen, welche Einstellungen Sie vornehmen müssen, um den gewünschten Effekt zu erhalten. Bei der Suche im Internet habe ich folgende Seiten gefunden, die andere Webseiten mit kostenlosen VST Plugins gelistet haben: 쐽 http://www.delamar.de/musikproduktion/free-vst-plugins-800/ 쐽 http://freevstplugins.blogspot.com/search/label/Free%20VST%20Effects 쐽 http://antress.er-webs.com/ Zudem gibt es etliche, die kostenpflichtige Plugins anbieten. Dazu gehört die Firma Bias Inc., http://www.bias-inc.com/products/. Die Firma Bias Inc. hat für Pinancle Studio 11 Ultimate ein Plug-in kostenlos mitgeliefert, mit dem sehr gut Audio entrauscht werden kann. Das Plug-in funktioniert auch für die Pinnacle Studio Version 15, kostet aber ca. 129 US-Dollar. Falls Sie eine Lizenz von Pinnacle Studio 11 besitzen, können Sie das Plug-in auch in der Version 15 installieren. Dazu aber mehr am Schluss dieses Kapitels.
329
Kapitel 16 – Tipps & Tricks
VST Plugins installieren Die Installation von VST Plugins ist nicht schwierig, erfordert aber den Eingriff in die Dateistruktur auf der Festplatte. Ein Plug-in muss immer in einen speziellen Ordner der Software installiert bzw. kopiert werden, in der das Plug-in verwendet werden soll. Ein VST Plugin besteht immer aus einer sogenannten DLL-Datei. Diese Dateien beinhalten alle Informationen darüber, was das VST Plugin später machen soll. Oft wird auch noch eine Dokumentation, zum Beispiel im PDF-Format, mitgeliefert. Diese DLLDateien müssen in den Standard-Plugin-Ordner von Pinnacle Studio kopiert werden. Wenn also die DLL-Dateien bei der Installation des Plug-ins nicht direkt in diesen Ordner kopiert werden, müssen Sie dies manuell tun. Am besten zeige ich Ihnen das anhand eines konkreten Beispiels: 1. Starten Sie Ihren Webbrowser und öffnen Sie den folgenden Link, um die Kjearhus-Audio-Classic-Series VST-Bibliothek auf Ihren PC zu speichern: http://www.dreamworx.eu/ ka/Classic-Effects-Installer.exe Weitere Infos zu diesen Plug-ins finden Sie auf folgender Internetseite: http:// www.dreamsong.de/2010/11/28/kjearhus-audio-classic-series-2/ 2. Speichern Sie die Datei Classic-Effects-Installer.exe auf Ihrem PC, zum Beispiel auf dem Desktop. Starten Sie den Installer durch einen Doppelklick auf Classic-Effects-Installer.exe. 3. Klicken Sie auf Next, dann nochmals auf Next und dann auf Finish, um die Plug-ins auf der Festplatte zu installieren. Die VST Plugins werden dabei in den Windows-Standard-VST-Plugins-Ordner kopiert. Dieser befindet sich normalerweise auf einem Windows-PC in folgendem Verzeichnis: 쐽 Windows XP: C:\Programme\Vstplugins 쐽 Windows Vista und Windows 7: C:\Program Files\Vstplugins Wenn Sie diesen Ordner im Explorer öffnen, dann sieht der Inhalt in etwa so aus:
Abbildung 16.45: Inhalt des VST-Standardordners von Windows
Die Plug-ins sind nun aber noch nicht in Pinnacle Studio verfügbar, sondern müssen noch in den VST-Plugins-Ordner von Studio kopiert werden. Dies geht wie folgt: 4. Kopieren Sie nun alle DLL-Dateien in die Zwischenablage. Dazu selektieren Sie alle Dateien mit der Maus und wählen (Strg)+(C). 5. Öffnen Sie nun den VST-Plugin-Ordner im Explorer von Pinnacle Studio: C:\Programme\Pinnacle\Studio 15\Plugins\SystemAudio. 6. Erstellen Sie darin einen neuen Unterordner z.B. mit dem Namen Kjaerhus.
330
Tipps und Tricks für Fortgeschrittene 7. Fügen Sie alle DLL-Dateien aus der Zwischenablage in diesen Ordner mit (Strg)+(V) ein. 8. Starten Sie Pinnacle Studio oder starten Sie es erneut, falls dieses bereits geöffnet ist. 9. Öffnen Sie die Audio-Toolbox z.B. über das Menü Toolbox und wählen Sie Audioeffekt hinzufügen.
Abbildung 16.46: Die VST Plugins sind nun in den Audioeffekten aufgelistet
10. Klicken Sie mit der Maus auf einen Audio- oder Videoclip auf der Timeline und wählen Sie unter Effekt den gewünschten Effekt aus. Klicken Sie dann auf OK.
Kostenlose Videoeffekte installieren Pinnacle Studio HD bietet eine offene Programmierschnittstelle für Videoeffekte an. Nun gibt es einige Videoeffekte, die kostenlos aus dem Internet heruntergeladen und in Studio HD installiert werden können. Nachfolgend sind einige Effekte kurz beschrieben und erklärt, wie Sie diese in Pinnacle Studio HD Version 15 installieren. Grundsätzlich ist die Installation eines solchen Videoeffekts recht einfach. Sie laden den Effekt aus dem Internet auf Ihre Festplatte und kopieren dann die Dateien mit der Endung .fex in das folgende Verzeichnis Ihrer Festplatte: C:\Programme\Pinnacle\Studio 15\Plugins\RTFx. Je nachdem, wie umfangreich das Plug-in ist, müssen noch Dateien mit der Endung .XML in den RTFx-Ordner kopiert werden. Sie können dabei auch Unterordner erstellen, um eine bessere Übersicht zu haben. Sollte ein Effekt als ZIPArchiv zur Verfügung stehen, müssen die Dateien erst entzippt werden, bevor Sie sie in das Plugins-Verzeichnis kopieren.
331
Kapitel 16 – Tipps & Tricks
Abbildung 16.47: Die Videoeffekte werden über die Video-Toolbox angewendet
Nachdem Sie den Effekt in das RTFx-Verzeichnis kopiert haben, müssen Sie Pinnacle Studio HD neu starten. Beim Start wird der Plugins-Ordner nach Effekten überprüft und in den Videoeffekten angezeigt. Auf folgenden Internetseiten finden Sie Plug-ins, die Sie in Pinnacle Studio HD verwenden können, auch wenn dies für die Version 15 nicht explizit angegeben ist: 쐽 http://www.hlinke.de/Home_d/home_d.html 쐽 http://plugins.loettgen.net 쐽 http://www.barnaclebill.co.uk/Pinnacle%20Studio%20Plug%20In.htm 쐽 http://www.jpseffects.de/ 쐽 http://www.klaus-horst.homepage.t-online.de/hobby/index.html
332
17 Inhalt der DVD zum Buch Auf beiliegender DVD finden Sie eine uneingeschränkte Demoversion von Studio HD Ultimate, die 30 Tage lang genutzt werden kann. Weiterhin enthält sie die kostenlose Videoschnittanwendung VideoSpin sowie ein PDF (eBook) dieses Buches komplett in Farbe.
Studio HD Ultimate Demoversion Um die Demo zu installieren, doppelklicken Sie einfach auf die Datei PinnacleStudio_ Trial_V15.exe und folgen den Bildschirmanweisungen.
VideoSpin VideoSpin ist eine kostenlose Version von Pinnacle Studio mit sehr eingeschränktem Funktionsumfang. Es lassen sich allerdings mit dieser Software einfache Videos bearbeiten. Weitere Infos dazu lesen Sie in Kapitel 18 „VideoSpin“. Um VideoSpin zu installieren, doppelklicken Sie einfach auf die Datei VideoSpin_2_0_Setup.exe.
eBook in Farbe Das vorliegende Buch können Sie als eBook im PDF-Format komplett in Farbe lesen. Öffnen Sie das Verzeichnis eBook und starten Sie die PDF-Datei. Um das eBook auf einem Computer lesen zu können, benötigen Sie den Acrobat Reader. Diesen können Sie unter www.adobe.de kostenlos herunterladen und auf Ihrem PC installieren.
333
18 VideoSpin
VideoSpin ist eine kostenlose Version von Pinnacle Studio mit einem reduzierten Funktionsumfang. Wenn Sie aber schnell einfache Videos erstellen möchten, können Sie mit VideoSpin gleich loslegen. Das Programm ist auf der beiliegenden DVD enthalten. Projekte, die mit VideoSpin erstellt wurden, können mit Pinnacle Studio ohne Probleme weiterverarbeitet werden. Öffnen Sie einfach das Videoprojekt in Studio. Weitere Informationen zu VideoSpin finden Sie auf folgender Internetseite: www.videospin.com/de. Weitere Hilfe finden Sie unter diesem Link: www.videospin.com/de/support.asp.
Abbildung 18.1: VideoSpin von Pinnacle
335
Kapitel 18 – VideoSpin
Installation Sollten Sie im Besitz einer Pinnacle Studio-Vollversion sein, müssen Sie VideoSpin nicht auf Ihrem PC installieren. Ansonsten gehen Sie wie folgt vor. 1. Doppelklicken Sie mit der Maus auf die Datei VideoSpin_2_0_Setup.exe auf der beiliegenden DVD dieses Buches, um die Installation zu starten.
Abbildung 18.2: Wählen Sie die Sprache
2. Wählen Sie die Sprache für die Installation aus und klicken Sie dann auf OK.
Abbildung 18.3: Füllen Sie die Felder aus und klicken Sie auf Jetzt registrieren
3. Geben Sie Ihre Informationen ein. Sie müssen sich bei Pinnacle registrieren, wenn Sie VideoSpin benutzen möchten.
Abbildung 18.4: Sie müssen die Lizenzvereinbarung akzeptieren, um VideoSpin zu installieren
4. Wählen Sie Ich akzeptiere die Bedingungen der Lizenzvereinbarung und klicken Sie auf Weiter.
336
Installation
Abbildung 18.5: Bestätigen Sie den Installationsordner
5. Klicken Sie auf Weiter, um VideoSpin im Standardordner für Programme zu installieren. Bestätigen Sie erneut mit einem Klick auf Weiter.
Abbildung 18.6: Erstellen Sie eine Verknüpfung auf dem Desktop
6. Wenn Sie nach der Installation eine Verknüpfung auf dem Desktop für VideoSpin haben möchten, wählen Sie die Option Desktop und klicken auf Weiter.
Abbildung 18.7: Die Installation starten
337
Kapitel 18 – VideoSpin 7. Wählen Sie Installieren, um mit der Installation zu beginnen.
Abbildung 18.8: Die Installation ist abgeschlossen
8. Klicken Sie auf Fertigstellen, um die Installation zu beenden.
Abbildung 18.9: Doppelklicken Sie auf das Icon, um VideoSpin zu starten
9. Klicken Sie auf das VideoSpin-Icon auf dem Desktop, um das Programm zu starten.
Abbildung 18.10: Wählen Sie, ob Sie die Codecs erwerben möchten oder nicht
10. Klicken Sie auf Später kaufen, um die Software zu starten. Wählen Sie Jetzt kaufen, wenn Sie die Codecs aktivieren möchten. Die Webseite von Pinnacle, auf der Sie die Codecs erwerben können, öffnet sich.
338
Einführung in VideoSpin
Abbildung 18.11: Die Oberfläche von VideoSpin
VideoSpin sieht Pinnacle Studio sehr ähnlich. Die verfügbaren Funktionen sind wie bei Studio zu verwenden.
Einführung in VideoSpin In VideoSpin haben Sie die Möglichkeit, Videos, Fotos und Musik zu bearbeiten, diese mit Übergangseffekten zu versehen und Titel zu erstellen. Ihr Videomaterial muss bereits auf dem Computer vorliegen. VideoSpin unterstützt nicht das Einlesen (Capturen) von analogem oder digitalem Band. Ebenfalls fehlen die Video- und die AudioToolbox mit erweiterten Funktionen und Effekten. Detaillierte Informationen zu den einzelnen Funktionen entnehmen Sie den vorangehenden Kapiteln.
Videos ins Album laden
Abbildung 18.12: Klicken Sie im Album auf das Ordnersymbol, um Videos zu laden
339
Kapitel 18 – VideoSpin 1. Klicken Sie mit der linken Maustaste auf das Symbol Videodateien aus einem anderen Verzeichnis auswählen. 2. Wählen Sie eine Videodatei auf Ihrem PC aus und klicken Sie auf Öffnen, um die Datei ins Album zu laden.
Abbildung 18.13: Videodatei im Album, in Szenen unterteilt
Die einzelnen Clips bzw. Szenen können nun mit der Maus per Drag&Drop auf die Timeline gelegt werden. 3. Ziehen Sie mit der Maus einen oder mehrere Clips auf die Timeline in der Reihenfolge, wie die Clips im Film erscheinen sollen.
Abbildung 18.14: Ziehen Sie die Clips per Drag&Drop auf die Timeline
4. Ziehen Sie mit der Maus den Timeline-Scrubber über die Videoclips, um die aktuelle Position zu verschieben.
340
Einführung in VideoSpin
Abbildung 18.15: Verschieben Sie den Timeline-Scrubber, um im Film zu navigieren
5. Sie können die Ansicht der Timeline vergrößern, damit Sie die einzelnen Clips genauer bearbeiten können. Positionieren Sie die Maus in der Zeitleiste, drücken Sie die linke Maustaste und bewegen Sie die Maus nach rechts oder nach links.
Abbildung 18.16: Vergrößern bzw. Verkleinern der Timeline-Ansicht
Schneiden, Trimmen und Löschen Sie können die einzelnen Szenen auf der Timeline schneiden, um überflüssiges Material zu entfernen bzw. zusätzliche Szenen zwischen einem bestehenden Clip zu schneiden. 1. Positionieren Sie den Timeline-Scrubber mit der Maus an der gewünschten Stelle, an der geschnitten werden soll. 2. Klicken Sie mit der Maus auf die Rasierklinge am rechten Rand.
341
Kapitel 18 – VideoSpin
Abbildung 18.17: Schneiden Sie einen Clip durch Klicken auf die Rasierklinge
Der Clip wurde nun getrennt. Sie können sich nun entscheiden, welches Stück weggeschnitten werden soll, bzw. Sie können einen anderen Clip dazwischen legen. 3. Um ein Stück zu löschen, wählen Sie es mit der Maus an. 4. Klicken Sie mit der Maus auf das Papierkorbsymbol.
Abbildung 18.18: Zum Löschen eines Clips klicken Sie auf das Papierkorbsymbol
Der Clip wird nur auf der Timeline gelöscht, nicht aber auf Ihrer Festplatte. Sie können den Clip jederzeit wieder aus dem Album auf die Timeline legen. Sie können einen Clip mit der sogenannten Trimm-Funktion verkürzen oder einen bereits geschnittenen Clip wieder verlängern. Gehen Sie dazu wie folgt vor. 5. Wählen Sie einen Clip auf der Timeline aus und klicken Sie mit der linken Maustaste darauf. 6. Bewegen Sie die Maus an den Anfang bzw. das Ende des Clips, bis ein blaues Pfeilsymbol erscheint.
Abbildung 18.19: Der blaue Pfeil zeigt an, dass getrimmt werden kann
7. Klicken Sie mit der linken Maustaste und bewegen Sie die Maus nach rechts oder nach links, um den Clip zu verkürzen bzw. zu verlängern.
342
Einführung in VideoSpin
Übergangseffekte 1. Wählen Sie im Album die Übergangseffekte aus, um die verfügbaren Effekte anzuzeigen.
Abbildung 18.20: Übergangseffekte in VideoSpin
2. Ziehen Sie einen gewünschten Effekt mit der Maus zwischen zwei Clips auf die Timeline.
Abbildung 18.21: Übergangseffekt zwischen zwei Clips
3. Der Übergangseffekt überblendet nun den rechten Clip in den linken Clip. Positionieren Sie die Playline an den Anfang des Films und spielen Sie diesen ab, indem Sie auf die Wiedergabe-Taste unterhalb des Vorschaufensters klicken, oder drücken Sie die (Leertaste).
Abbildung 18.22: Spielen Sie den Clip ab, um den Effekt zu beurteilen
343
Kapitel 18 – VideoSpin
Titel Wechseln Sie im Album in das Titelmenü, um die Titelvorlagen anzuzeigen.
Abbildung 18.23: Titelvorlagen in VideoSpin
1. Wählen Sie eine Titelvorlage aus und ziehen Sie diese per Drag&Drop auf die Timeline, entweder auf die Videospur oder auf die Titelspur weiter unten. Befindet sich der Titel auf der Videospur, wird dieser neben einem Videoclip angezeigt. Befindet sich der Titel aber eine Spur darunter, dann wird er gleichzeitig mit dem Videoclip wiedergegeben.
Abbildung 18.24: Titel auf der Titelspur
Wenn Sie den Titel verändern möchten, gehen Sie wie folgt vor: 2. Doppelklicken Sie mit der linken Maustaste auf den Titel, um den Titeleditor zu öffnen. 3. Klicken Sie in das Textfeld und ändern Sie den Text. 4. Sie können auch die Schriftart, Größe, Farbe usw. verändern. 5. Um die Änderungen zu übernehmen, klicken Sie auf OK. Weitere Informationen über den Titelgenerator entnehmen Sie Kapitel 7 „Titel“.
344
Einführung in VideoSpin
Abbildung 18.25: Titelgenerator von VideoSpin
Standbilder und Fotos Mit VideoSpin können Sie auch Fotos und Standbilder, die Sie auf dem PC gespeichert haben, in einem Film verwenden. Gehen Sie dazu wie folgt vor: 1. Wählen Sie die Standbilder im Album.
Abbildung 18.26: Fotos und Standbilder in VideoSpin
2. Wählen Sie das Ordnersymbol, um in das Verzeichnis zu navigieren, in dem Sie Fotos gespeichert haben. 3. Wählen Sie ein Foto aus und klicken Sie auf Öffnen. Alle Bilder im selben Ordner werden in das Album geladen.
345
Kapitel 18 – VideoSpin Nun können Sie die Bilder genau wie die Videos per Drag&Drop auf die Timeline legen, schneiden und trimmen. Übergangseffekte funktionieren genauso wie bei Videoclips. Die Länge bzw. Anzeigedauer der einzelnen Bilder können Sie verändern, indem Sie die Fotos trimmen.
Audio und Musik Mit den beiden letzten Symbolen im Album können Sie Audioclips und Musikstücke, die Sie auf dem PC gespeichert haben, in das Album laden.
Abbildung 18.27: Audio und Musik
Laden Sie die Musikstücke wiederum über das Ordnersymbol in das Album. Per Drag&Drop können Sie die Musikstücke auf der Timeline auf den unteren beiden Spuren positionieren.
Abbildung 18.28: Positionieren Sie die Musikstücke auf der Timeline per Drag&Drop aus dem Album
Die Musikstücke können ebenso wie Videoclips und Fotos geschnitten, getrimmt und wieder gelöscht werden.
346
Film erstellen und exportieren Die Lautstärke eines Audioclips können Sie wie folgt verändern: 1. Klicken Sie mit der Maus einen Audioclip auf der Timeline an. 2. Bewegen Sie die Maus auf die horizontale Linie auf dem Audioclip, bis das Symbol eines Lautsprechers erscheint.
Abbildung 18.29: Verändern der Audiolautstärke auf der Timeline
3. Klicken Sie mit der linken Maustaste und bewegen Sie die Maus nach oben oder nach unten, um einen sogenannten Ziehpunkt zu erzeugen. Nach oben bedeutet, das Audio wird lauter eingestellt, nach unten bedeutet leiser. 4. Erstellen Sie mehrere solcher Ziehpunkte an jeder Position, an der sich die Lautstärke verändern soll. 5. Um einen Ziehpunkt zu löschen, ziehen Sie ihn nach oben oder nach unten, bis er verschwindet.
Abbildung 18.30: Ziehen Sie den Ziehpunkt nach oben oder nach unten, um ihn zu löschen
Film erstellen und exportieren Unter Film erstellen können Sie den geschnittenen Film in eine Datei exportieren oder direkt ins Internet laden, z.B. auf die Plattform YouTube.com. Weitere Informationen zum Exportieren und eine Beschreibung der Dateiformate finden Sie in Kapitel 13 „Film erstellen“ bzw. Kapitel 15 „Videoformate“. Ein direktes Brennen auf CD, DVD oder Blu-ray ist mit dieser Version von Studio nicht möglich. Sie können den Film aber in ein entsprechendes Format exportieren und den Film dann mit einem Brennprogramm auf Disc schreiben.
347
Kapitel 18 – VideoSpin
Exportieren in eine Datei 1. Wählen Sie im Register 2 Film erstellen ein Dateiformat aus, in dem der geschnittene Film auf der Timeline exportiert werden soll.
Abbildung 18.31: Register 2 Film erstellen
2. Wählen Sie die gewünschte Voreinstellung aus und klicken Sie dann auf Datei erstellen..., um den Export zu starten.
Abbildung 18.32: Wählen Sie unter Voreinstellung die gewünschten Einstellungen aus
3. Wenn Sie die Exporteinstellungen ändern möchten, klicken Sie auf Einstellungen. Ein Dialog erscheint, in dem sämtliche Einstellungen vorgenommen werden können. Wenn Sie nicht sicher sind, welche Einstellungen Sie vornehmen sollen, wählen Sie eine Voreinstellung aus der Liste aus. 4. Klicken Sie auf OK, um die Änderungen zu übernehmen, und dann auf Datei erstellen..., um den Film in den veränderten Einstellungen zu exportieren.
348
Film erstellen und exportieren
Abbildung 18.33: Individuelle Einstellungen für den Dateiexport
Internet-Upload Mit dieser Funktion können Sie Ihren Film direkt auf Yahoo! Video oder YouTube laden. Der Film wird in das entsprechende Format konvertiert und danach hochgeladen. Damit Sie Filme zu diesen Anbietern hochladen können, müssen Sie sich vorher registrieren. Sie erhalten dann einen Benutzernamen und ein Passwort, mit dem Sie sich einloggen können. Die Registrierung können Sie direkt vornehmen, wenn der Export gestartet wurde. 1. Klicken Sie auf der linken Seite auf das Websymbol, um den Dialog zu öffnen. 2. Wählen Sie, ob Sie den Film auf Yahoo! Video oder YouTube laden möchten.
Abbildung 18.34: Wählen Sie die Plattform für Ihren Film
Ein Film darf maximal 100 MByte groß sein. Das entspricht bei Yahoo! Video ca. 5 Minuten und bei YouTube ca. 10 Minuten. 3. Klicken Sie auf Erstellen, um den Film hochzuladen. Weitere Informationen zum Hochladen und Registrieren bei den Plattformen finden Sie in Kapitel 13 „Film erstellen“.
349
Anhang Pinnacle Studio HD Ultimate- und Ultimate CollectionPlug-ins In der Version Studio HD Ultimate und Studio HD Ultimate Collection werden im Lieferumfang weitere Plug-ins von Drittherstellern mitgeliefert, mit denen Sie weitere Effekte, Farbkorrekturen und Logos animieren können. Im Folgenden sind die Plug-ins jeweils kurz erklärt. Auf der beiliegenden DVD ist ein Video enthalten, das die einzelnen Effekte kurz veranschaulicht. Die Plug-ins befinden sich alle in der Video-Toolbox unter Videoeffekte. Zum Anwenden der Plug-ins gehen Sie immer wie folgt vor: 1. Platzieren Sie einen Videoclip, ein Foto oder einen Titel auf die Timeline. 2. Wählen Sie mit der Maus den oder die Clips aus, auf die Sie einen Effekt anwenden möchten. 3. Öffnen Sie die Videoeffekte über das Menü Toolbox/Videoeffekte hinzufügen.
Abbildung A.1: Videoeffekte in der Video-Toolbox
4. Wählen Sie nun eine Kategorie und den gewünschten Effekt aus. 5. Klicken Sie auf OK, um den Effekt anzuwenden. Weitere Infos zu den einzelnen Effekten finden Sie, wenn Sie auf das Fragezeichensymbol klicken.
351
Anhang – Pinnacle Studio HD Ultimate- und Ultimate Collection-Plug-ins
Abbildung A.2: Für weitere Hilfen zu den einzelnen Plug-ins klicken Sie auf das Fragezeichen
Red Giant Knoll Light Factory Achtung
Diese Funktion ist nur in Pinnacle Studio HD Ultimate und Pinnacle Studio HD Ultimate Collection Version 15 verfügbar. Mit dem Plug-in Knoll Light Factory können Sie Lichtreflexe und Linsenspiegelungen auf einen Clip anwenden. Sobald Sie den Effekt auf einen Clip angewandt haben, sehen Sie im Vorschaufenster sofort das Resultat.
Abbildung A.3: Der Knoll Light Factory-Effekt fügt dem Clip einen Lichtreflex hinzu
Sie können nun die Einstellungsparameter mit der Maus beeinflussen, um z.B. die Position des Reflexes oder die Intensität zu verändern. Der Knoll Light Factory-Effekt kann zudem mit den Keyframes animiert werden, sodass sich der Lichtreflex über einen Clip bewegt. Wählen Sie dazu unter Voreinstellungen einen vordefinierten Effekt aus.
Abbildung A.4: Unter Einstellungen sind vordefinierte Effekte abgelegt
Der Effekt enthält bereits vordefinierte Keyframe-Positionen, die nachträglich individuell angepasst werden können.
352
Red Giant ToonIt Roto
Abbildung A.5: Vordefinierte Keyframe-Effekte der Knoll Light Factory
Weitere Informationen über die Keyframe-Animation finden Sie in Kapitel 11, Abschnitt „Videoeffekte“.
Red Giant ToonIt Roto Diese Funktion ist nur in Pinnacle Studio HD Ultimate und Pinnacle Studio HD Ultimate Collection Version 15 verfügbar. Mit der Red Giant ToonIt Roto-Effekte-Bibliothek können Sie aus einem Bild oder einem Videoclip einen Zeichentrickfilm erstellen. Dabei wird das Video oder ein Foto dargestellt, als sei dies mit einem Farbstift oder Pinsel gemalt.
Abbildung A.6: ToonIt Roto-Effekt
Auf der Timeline sehen Sie das Original als gefilmte Szene, im Vorschaufenster das veränderte Video im Comicstil. Der Effekt hat unterschiedliche Einstellungen wie Comic, Kinderbuch, Plakat, Wasserfarbe, Ölfarbe usw.
353
Achtung
Anhang – Pinnacle Studio HD Ultimate- und Ultimate Collection-Plug-ins
Abbildung A.7: Unter Voreinstellungen wählen Sie vordefinierte Effekte aus
Wählen Sie im Dropdown-Feld bei Voreinstellungen einen gewünschten Effekt aus. Diesen können Sie später mit den Parametereinstellungen individuell anpassen. Ziehen Sie einfach mit der Maus an den Schiebereglern, das Resultat sehen Sie sofort im Vorschaufenster. Wenn Sie weiter nach unten scrollen, sehen Sie die Optionen, um die Qualität der Effekte zusätzlich zu verbessern.
Abbildung A.8: Unter Priorität kann die Qualität des Effekts verbessert werden
Für eine optimale Qualität wählen Sie unter Priorität die Option Qualität aus. Die Berechnung dauert zwar länger, der Effekt sieht aber um einiges besser aus. Wiederum lassen sich bei diesem Effekt die Keyframes nutzen. Aktivieren Sie dazu die Option Keyframes anwenden.
Red Giant Trapcode Shine-Leuchten Achtung
Diese Funktion ist nur in Pinnacle Studio HD Ultimate Collection Version 15 verfügbar. Mit dem Shine-Effekt von Red Giant Trapcode können Sie z.B. eine Logo-Animation erstellen, die einen Leuchteffekt über die Schrift anzeigt. Ebenso kann der Effekt auf einen Videoclip oder auf ein Foto angewendet werden.
354
Red Giant Trapcode Shine-Leuchten
Abbildung A.9: Shine-Effekt von Red Giant
Grundsätzlich können Sie bei diesem Effekt unter Voreinstellungen eine Vorlage auswählen. Dabei handelt es sich um Effekte für Standard-Definition(SD)-Videomaterial oder High-Definition(HD)-Videomaterial. Zudem sind die Effekte in statische oder dynamische Effekte eingeteilt.
Abbildung A.10: Die unterschiedlichen Voreinstellungen des Shine-Effekts
Unter der Rubrik Keyframe-Einstellungen befinden sich die dynamischen Shine-Voreinstellungen, alle anderen oberhalb sind statisch. Dabei wird jeweils der Effekt mittels Keyframes animiert. Wählen Sie einfach eine gewünschte Vorlage aus, im Vorschaufenster sehen Sie sofort eine Voransicht des Effekts. Verändern Sie nun in der Parameterliste die einzelnen Effekte. Unter Kontrollen können Sie die Lage und Strahlenlänge des Shine-Effekts beeinflussen. Quellpunkt X verschiebt den Effekt horizontal nach links oder nach rechts, Quellpunkt Y verschiebt die Strahlen vertikal nach oben oder nach unten. Mit Strahlenlänge können Sie die Länge der Strahlen verändern.
Abbildung A.11: Mit den Schiebereglern wird der Shine-Effekt verändert
355
Anhang – Pinnacle Studio HD Ultimate- und Ultimate Collection-Plug-ins Mit der Einstellung Schimmer können Sie ein Flimmern bzw. einen Schimmer-Effekt hinzufügen. Scrollen Sie in der Parameterliste nach unten, um weitere Einstellungen anzeigen zu lassen.
Abbildung A.12: Weitere Einstellungsmöglichkeiten des ShineEffekts
Mit Lichtverstärkung können Sie die Helligkeit der Lichtstrahlen intensivieren. Unter Färben können Sie angeben, wie viele Farben im Effekt zu sehen sein sollen. Die Leuchtopazität beeinflusst die Transparenz des Effekts bzw. die Intensität. Der Wert 0 würde den Effekt komplett ausblenden. Unter Transfer-Modus beeinflussen Sie die Art, wie der Effekt mit einem Foto oder Videoclip berechnet werden soll.
Abbildung A.13: Transfer-Modus: Kein
Abbildung A.14: Transfer-Modus: Normal
Dynamische Voreinstellungen wenden Keyframes auf den Clip an und lassen den Shine-Effekt über die Anzeigedauer eines Clips bewegen.
Abbildung A.15: Keyframe-Einstellungen auf einen Shine-Effekt
Weitere Informationen zur Keyframe-Animation finden Sie in Kapitel 11, Abschnitt „Videoeffekte“.
Red Giant Trapcode 3DStroke Achtung
Diese Funktion ist nur in Pinnacle Studio HD Ultimate Collection Version 15 verfügbar.
356
Red Giant Trapcode Particular Mit 3DStroke von Red Giant können Sie animierte Elemente über einen Titel oder einen Video- oder Fotoclip bewegen lassen. Diese Effekte eignen sich sehr gut als Logo-Animation oder zur Erstellung eines animierten Hintergrunds für einen Titel oder ein Disc-Menü.
Abbildung A.16: Red Giant 3DStroke
Wählen Sie unter Voreinstellungen eine Vorlage aus. Beim 3DStroke-Effekt gibt es keine statischen Vorlagen. Lassen Sie den Clip im Vorschaufenster abspielen, um sofort das Resultat zu sehen.
Abbildung A.17: Wählen Sie unter Stellungen einen Vorlagen-Effekt aus
Die Effekte sind unterteilt in SD(Standard Definition)- und HD(High Definition)-Vorlagen. Sobald Sie eine Vorlage angewandt haben, können Sie nun in den Parametern die Einstellungen des Effekts verändern und anpassen. Ändern Sie unter Voreinstellung die Art der Animation und mit den weiteren Schiebereglern, wie der Effekt dargestellt wird.
Red Giant Trapcode Particular Diese Funktion ist nur in Pinnacle Studio HD Ultimate Collection Version 15 verfügbar. Mit dem Particular-Effekt von Red Giant können Partikel wie Flammen, Sterne, Bogen usw. über einen Video-, Foto- oder Titelclip gelegt werden.
357
Achtung
Anhang – Pinnacle Studio HD Ultimate- und Ultimate Collection-Plug-ins
Abbildung A.18: Particular-Effekt von Red Giant
Wählen Sie unter Voreinstellungen einen gewünschten Vorlagen-Effekt aus. In der Dropdown-Liste sind unterschiedliche Voreinstellungen für SD (Standard Definition) und HD (High Definition) optimiert. Zudem gibt es statische Effekte ohne KeyframeAnimationen. Im Gegensatz zu den Keyframe-animierten Voreinstellungen bewegt sich nicht nur der Effekt, sondern er wechselt auch die Position im Bild.
Abbildung A.19: Unter Keyframe-Einstellungen befinden sich die dynamischen Voreinstellungen
Wählen Sie einfach eine gewünschte Voreinstellung aus und spielen Sie dann den Film im Vorschaufenster ab, um das Resultat sofort zu sehen. Passen Sie im Fenster der einzelnen Parameter die gewünschten Einstellungen an.
Abbildung A.20: Mit den Parametern können die einzelnen Einstellungen angepasst werden
Weitere Infos zu Keyframe-Animation lesen Sie in Kapitel 11, Abschnitt „Videoeffekte“.
Magic Bullet Looks Achtung
Diese Funktion ist nur in Pinnacle Studio HD Ultimate Collection Version 15 verfügbar.
358
Magic Bullet Looks Mit Magic Bullet Looks können Sie Farbkorrekturen und Farbfilter auf Ihre Videos in höchster Qualität und mit unendlichen Einstellungsmöglichkeiten anwenden. Was aber sehr kompliziert klingt, ist in Wirklichkeit ganz einfach. Das Looks-Plug-in von Magic Bullet funktioniert nur mit einer Grafikkarte, die über mindestens 256 MByte RAM, Pixelshader 2 und die aktuellsten Treiber verfügt. Empfohlen werden sogar 512 MByte RAM. Intel GMA-integrierte Grafikkarten werden nicht unterstützt. Falls Ihr PC diese Voraussetzungen nicht erfüllt, ist das Plug-in in Studio HD Ultimate Collection nicht sichtbar und kann nicht verwendet werden. Eine Meldung, ob das Plug-in gestartet werden kann oder nicht, erscheint nach dem Start von Studio HD.
Abbildung A.21: Fehlermeldung beim Starten von Studio HD Ultimate Collection, falls das Plug-in Looks nicht verwendet werden kann
Abbildung A.22: Videoeffekt Looks von Magic Bullet
1. Wählen Sie unter Kategorie Magic Bullet und dann den Effekt Looks und klicken Sie auf OK. 2. Klicken Sie mit der Maus auf das Symbol, um das Plug-in zu starten.
Abbildung A.23: Das Plug-in Looks starten
359
Achtung
Anhang – Pinnacle Studio HD Ultimate- und Ultimate Collection-Plug-ins Das Plug-in wird gestartet und der aktuelle Videoclip geladen.
Abbildung A.24: Looks von Magic Bullet lädt den aktuellen Videoclip
3. Der geladene Clip ist jetzt unverändert. Sie können vordefinierte Farbkorrekturen verwenden und diese nach Ihren Wünschen anpassen. Damit Sie die Vorlagen sehen können, bewegen Sie die Maus an den linken Bildschirmrand und klicken auf das vertikal geschriebene Wort Looks.
Abbildung A.25: Klicken Sie auf Looks, um die Vorlagen anzuzeigen
4. Die Vorlagen sind in unterschiedliche Kapitel aufgeteilt. Öffnen Sie die einzelnen Kapitel durch einen Klick auf das kleine Dreieckssymbol.
360
Magic Bullet Looks
Abbildung A.26: Die Effektvorlagen von Looks
5. Sie können nun einen beliebigen Effekt auswählen, um den Film farblich zu korrigieren. Doppelklicken Sie mit der linken Maustaste auf ein kleines Vorschaubild. Falls Ihnen der Effekt nicht gefällt, können Sie jederzeit einen anderen wählen.
Abbildung A.27: Effekt anpassen
6. Sie können jede Vorlage anpassen, indem Sie die einzelnen Parameter auf der rechten Seite verändern. Klicken Sie dazu einfach im unteren Bereich auf eines der Symbole. Im Beispiel wäre das Warm/Cool, Ranged Saturation oder Diffusion. Am rechten Rand erscheinen je nachdem, welches Symbol gewählt wurde, unterschiedliche Einstellungsmöglichkeiten.
361
Anhang – Pinnacle Studio HD Ultimate- und Ultimate Collection-Plug-ins
Abbildung A.28: Verändern der Parameter durch Ziehen der Zahlen
Abbildung A.29: Verändern der Parameter durch Ziehen mit der Maus
7. Verändern Sie nun die Parameter, wenn Sie den Effekt individuell anpassen möchten. 8. Sobald Sie mit den Einstellungen zufrieden sind, klicken Sie auf OK, um die Anpassungen zu übernehmen. Wenn Sie auf Cancel klicken, verlassen Sie das Plug-in, ohne die Einstellungen zu übernehmen.
Effekte-Vorschau Sie können von allen Vorlagen eine Effekte-Vorschau anzeigen lassen, um alle Effekte der Reihe nach auszuprobieren. Klicken Sie dazu im Plug-in Looks auf View.
Abbildung A.30: Starten Sie die Effekte-Vorschau mit Klick auf View
Looks zeigt Ihnen nun alle Effekte der Reihe nach an.
Ultimate-Plug-ins einer älteren Version in Studio 15 übernehmen Falls Sie über eine ältere Version von Pinnacle Studio Ultimate verfügen, dann sind Sie im Besitz einiger interessanter Plug-ins, die in der Version 15 nicht mehr enthalten sind. Diese lassen sich mittels der nachfolgenden Anleitungen auch in die Version 15 übernehmen und funktionieren sehr gut. Hinweis
Bevor Sie die nachfolgenden Schritte durchführen, sollten Sie die mit Pinnacle Studio HD mitgelieferte Software übertrage content ausführen. Weiteres dazu lesen Sie in Kapitel 16 „Tipps & Tricks“. Falls die Zusätze mit übertrage Content nicht in Studio HD Version 15 verfügbar sind, dann sollten Sie die nachfolgenden Schritte manuell ausführen. Bei der Pinnacle Studio Ultimate Version 11 waren folgende Plug-ins enthalten: SoundSoap von Bias Inc., um Audio zu restaurieren und auf einfache Art störende Hinter-
362
Ultimate-Plug-ins einer älteren Version in Studio 15 übernehmen grundgeräusche zu entfernen, MovingPicture, um Fotos und Standbilder in Pinnacle Studio zu animieren, und die Effekte-Bibliothek Vitascene von Prodad. Leider gibt es in Pinnacle Studio 15 keine Funktion, diese Plug-ins automatisch zu laden, darum sind die nachfolgenden Schritte notwendig. Als Voraussetzung zur Übernahme der Plug-ins in die Version 15 ist es notwendig, dass Pinnacle Studio 11 Ultimate inkl. der Plug-ins auf dem PC installiert ist, auf dem auch die Version 15 betrieben wird. Installieren Sie also zuerst die Version 11 Ultimate, damit die nachfolgenden Schritte nachvollzogen werden können.
SoundSoap-Plug-in installieren Beim Plug-in SoundSoap handelt es sich um ein VST Plugin. Weitere Infos zu VST Plugins finden Sie in Kapitel 16 „Tipps & Tricks“. SoundSoap ist ein kostenpflichtiges Plug-in und kann bei BIAS Inc. unter http://www.bias-inc.com/ erworben werden. Falls Sie über Pinnacle Studio 11 Ultimate verfügen, sind Sie bereits im Besitz von SoundSoap PE. Das Verwenden des SoundSoap-Plug-ins in Studio 15 ist relativ einfach. Sie müssen lediglich die VST-Plugin-Daten aus dem Plugins-Ordner der Version 11 in den Plugins-Ordner der Version 15 kopieren. Beim Starten von Pinnacle Studio Version 15 werden dann die Plug-ins automatisch geladen und sind dann in den Audioeffekten in der Audio-Toolbox verfügbar. Gehen Sie wie folgt vor, um SoundSoap in Studio 15 zu installieren: 1. Öffnen Sie den Windows-Explorer durch einen Doppelklick auf Arbeitsplatz bzw. Computer oder klicken Sie mit der rechten Maustaste auf den Windows Start-Knopf und wählen Sie Windows-Explorer starten. 2. Öffnen Sie nun den Ordner auf der Festplatte, in den Sie Pinnacle Studio 11 installiert haben. Normalerweise ist dies C:\Programme\Pinnacle\Studio 11\. 3. In diesem Ordner finden Sie weitere Unterordner: Plugins\vst\BIAS SoundSoap PE. Der Inhalt des Ordners BIAS SoundSoap PE sieht wie folgt aus:
Abbildung A.31: Die Plug-in-Daten von SoundSoap befinden sich im Plugins-Ordner von Pinnacle Studio 11 Ultimate
363
Anhang – Pinnacle Studio HD Ultimate- und Ultimate Collection-Plug-ins 4. Kopieren Sie nun den Ordner BIAS SoundSoap PE in die Zwischenablage, wählen Sie diesen mit der Maus aus und drücken Sie die Tastenkombination (Strg)+(C), um den Ordner mit den Dateien zu kopieren. 5. Öffnen Sie nun den Unterordner SystemAudio im Plugins-Ordner von Studio 15 im Windows-Explorer: C:\Programme\Pinnacle\Studio 15\Plugins\SystemAudio. 6. Fügen Sie nun den zuvor kopierten Ordner mittels der Tastenkombination (Strg)+(V) in den SystemAudio-Ordner von Studio 15 ein.
Abbildung A.32: Die Plug-in-Daten von SoundSoap werden in das SystemAudio-Verzeichnis von Studio 15 kopiert
7. Starten Sie nun Pinnacle Studio 15 neu und öffnen Sie dann die Audioeffekte im Menü Toolbox/Audioeffekte hinzufügen. Sie finden dann das Plug-in im Unterordner BIAS SoundSoap PE in Pinnacle Studio.
Abbildung A.33: Das SoundSoap-Plug-in befindet sich nun in den Audioeffekten von Studio 15
364
Ultimate-Plug-ins einer älteren Version in Studio 15 übernehmen
Musikrestauration mit BIAS SoundSoap SoundSoap bietet einige interessante Möglichkeiten, störende Geräusche aus einem Audioclip oder Videoclip mit Originalton zu entfernen oder zu filtern. Damit Sie verstehen, was SoundSoap kann und wie es funktioniert, nachfolgend einige Grundlagen zur Audiomodifikation. BIAS SoundSoap kann z.B. störende Kamerageräusche entfernen, falls Ihre Kamera das eigene Bandlaufwerk aufgenommen hat, aber es können auch Knackser einer Schallplatte beseitigt werden usw. Sollten jedoch die Nebengeräusche zu laut sein, sodass die wichtigen Geräusche nicht mehr gut hörbar sind, kann SoundSoap nur begrenzt eingesetzt werden. Probieren Sie es einfach aus, Sie hören sofort das Resultat. Der Effekt kann in jedem Fall problemlos wieder entfernt werden, und Sie haben den Originalton, wie dieser aufgenommen wurde. Nachfolgend einige Geräuscharten und deren Beschreibung. Breitbandrauschen
Hierbei handelt es sich um Lärmquellen mit einem breiten Frequenzbereich.
Brummen
Ein Brummen ist ein störender Ton, meistens im Bereich von 60 Hz, und entsteht meistens, wenn die Aufnahmegeräte nicht sauber geerdet wurden oder durch Stromkabel.
Grollen, Rumpeln
Diese Lärmquellen haben Tieffrequenzen meistens um 40 Hz oder tiefer und können entstehen, wenn Audio von Drehtellern wie Schallplattenspielern oder Ähnlichem aufgenommen wurde.
Klicks und Knackser Die Geräusche können entstehen, wenn von Schallplatten aufgenommen wird und diese nicht ganz sauber sind. Tabelle 1.1: Störgeräusche, die mit SoundSoap korrigiert werden können
Ein starkes Werkzeug des Plug-ins ist das automatische Lernen bzw. Analysieren einer Sequenz. Dabei wird eine Stelle analysiert, am besten eine kurze Sequenz, die nur aus den Störgeräuschen besteht, und SoundSoap filtert diese Störfrequenzen dann aus dem Clip heraus.
Automatisches Entfernen von Störgeräuschen 1. Wählen Sie einen Audio- oder Videoclip auf der Timeline aus, von dem Sie das Audio korrigieren möchten. 2. Öffnen Sie die Audio-Toolbox und dort die Audioeffekte oder wählen Sie aus dem Menü Toolbox den Eintrag Audioeffekte hinzufügen. Wählen Sie aus der Kategorie BIAS SoundSoap PE den gleichnamigen Effekt aus. 3. Klicken Sie auf das Symbol neben BIAS SoundSoap PE bearbeiten, um das Plug-in zu starten.
365
Anhang – Pinnacle Studio HD Ultimate- und Ultimate Collection-Plug-ins
Abbildung A.34: Ein Klick auf das Symbol startet das Plug-in
4. Der SoundSoap-Editor öffnet sich. Klicken Sie auf den großen Knopf in der Mitte mit der Bezeichnung learn noise. 5. Positionieren Sie den Schieberegler der Timeline an einer Stelle, an der nur das Rauschen bzw. die Störgeräusche hörbar sind. 6. Spielen Sie den Film ab, indem Sie auf die Leertaste drücken. Die Sequenz wird von SoundSoap analysiert, und nach kurzer Zeit werden die Einstellungen vorgenommen. Sie hören sofort das Resultat und können beurteilen, ob die Audiokorrekturen richtig sind oder nicht. Sie können diesen Vorgang beliebig wiederholen, wenn Sie den Timeline-Schieberegler an eine andere Position platzieren.
Abbildung A.35: SoundSoap analysiert die aktuelle Sequenz, das Resultat ist gleich hörbar
Mit learn noise werden der Noise Tuner und die noise Reduction automatisch angepasst.
Noise Tuner und Noise Reduction Die Drehregler von Noise Tuner und Noise Reduction können durch Klicken und Ziehen mit der Maus nach rechts bzw. nach links verändert werden.
366
Ultimate-Plug-ins einer älteren Version in Studio 15 übernehmen Der Noise Tuner gibt an, in welchen Frequenzen die Störgeräusche liegen. Je weiter nach rechts gedreht wird, umso mehr Frequenzen sind von der Korrektur betroffen. Wird der Knopf weiter nach links gedreht, betrifft es weniger Frequenzen. Mit Noise Reduction wird die gewählte Frequenz vom Noise Tuner durch Drehen nach rechts verstärkt bzw. durch Drehen nach links abgeschwächt. Sie sollten also immer zuerst mit dem Noise Tuner die Störgeräusche lokalisieren und diese dann mit Noise Reduction entfernen bzw. den Effekt verstärken.
Brummen entfernen Falls auf Ihrem gewählten Clip ein Brummen entfernt werden soll, das von falsch geerdeten Geräten oder von Stromkabeln herrührt, können Sie die Einstellung unter Remove Hum vornehmen. Wählen Sie 50 Hz in Ländern wie Deutschland, Österreich und der Schweiz, in denen 50 Hz im Stromnetz verwendet werden, und 60 Hz zum Beispiel in den USA, Kanada usw. Die Option Off schaltet diesen Effekt wieder aus. Mit remove rumble können zusätzlich sehr tiefe Audiofrequenzen im Bereich von 40 Hz oder tiefer entfernt werden.
Klicks und Knackser entfernen Mit dem linken Schieberegler unter Remove Click & Crackle können Klicks und Knackser zum Beispiel von Schallplattenaufnahmen entfernt werden. Je weiter oben der Schieberegler ist, umso stärker werden diese entfernt. Befindet sich der Schieberegler ganz unten, ist der Effekt ausgeschaltet. Achten Sie darauf, dass dieser Regler standardmäßig nicht ganz oben ist, da der ganze Audioclip verändert wird und dies die Qualität beeinträchtigt.
Breitbandrauschen entfernen Unter Broadband kann Breitbandrauschen entfernt werden. On schaltet diesen Effekt bzw. Filter ein und off schaltet ihn wieder aus. Mit preserve voice werden Frequenzen gefiltert, die nicht im Frequenzbereich der menschlichen Stimme liegen. Damit sollte also eine menschliche Stimme nicht verändert werden. Wenn ein Clip keine menschliche Stimme enthält, sollte die preserve voice-Funktion nicht angewendet werden.
Enhancement, Verbesserung Mit dieser Funktion können Frequenzen wiederhergestellt werden, die bei sehr alten Video- oder Audioaufnahmen verloren gingen. Durch Schieben nach oben wird dieser Effekt verstärkt. Es ist aber sehr wichtig, dass diese Funktion zum Schluss angewendet wird, nachdem alle anderen Einstellungen vorgenommen wurden. Wenn sich der Schieberegler ganz unten befindet, ist diese Funktion der Audioverbesserung ausgeschaltet.
SoundSoap schließen Beenden Sie SoundSoap, indem Sie einfach das Fenster des Plug-ins schließen. Die Veränderungen werden für jeden einzelnen Clip gespeichert und können durch nochmaliges Aufrufen des Plug-ins weiter angepasst werden.
367
Anhang – Pinnacle Studio HD Ultimate- und Ultimate Collection-Plug-ins
StageTools MovingPicture installieren Beim Plug-in MovingPicture von StageTools handelt es sich um ein Videoeffekte-Plugin, mit dem hochauflösende Fotos oder Grafiken in Pinnacle Studio animiert werden können. So ist es möglich, einen Ausschnitt eines Fotos zu zeigen und diesen dann, während das Foto angezeigt wird, zu verschieben oder zu skalieren. Um das Plug-in in Pinnacle Studio 15 zu verwenden, gehen Sie wie folgt vor: 1. Öffnen Sie den Windows-Explorer durch einen Doppelklick auf Arbeitsplatz bzw. Computer oder klicken Sie mit der rechten Maustaste auf den Windows Start-Knopf und wählen Sie Windows-Explorer starten. 2. Öffnen Sie nun den Ordner auf der Festplatte, in den Sie Pinnacle Studio 11 installiert haben. Normalerweise ist dies C:\Programme\Pinnacle\Studio 11\. 3. In diesem Ordner finden Sie weitere Unterordner: Plugins\RTFx\StageTools.
Abbildung A.36: Die Plug-in-Daten von StageTools befinden sich im Plugins-Ordner von Pinnacle Studio 11 Ultimate
4. Kopieren Sie den Ordner StageTools in die Zwischenablage, wählen Sie diesen mit der Maus aus und drücken Sie die Tastenkombination (Strg)+(C), um den Ordner samt Inhalt zu kopieren. 5. Öffnen Sie den Unterordner RTFx im Plugins-Ordner von Studio 15 im WindowsExplorer: C:\Programme\Pinnacle\Studio 15\Plugins\RTFx. 6. Fügen Sie den zuvor kopierten Ordner mittels der Tastenkombination (Strg)+(V) in den RTFx-Ordner von Studio 15. 7. Starten Sie Pinnacle Studio 15 neu und öffnen Sie die Videoeffekte im Menü Toolbox/Videoeffekte hinzufügen. Sie finden das Plug-in im Unterordner StageTools in Pinnacle Studio.
368
Fotos animieren mit StageTools
Abbildung A.37: Die Plug-in-Daten von StageTools werden in das RTFx-Verzeichnis von Studio 15 kopiert
Abbildung A.38: Das StageTools-Plug-in befindet sich nun in den Videoeffekten von Studio 15
Um das StageTools-Plug-in verwenden zu können, müssen Sie ein Foto oder eine Grafikdatei auf der Timeline auswählen, bevor Sie den StageTools-Effekt anwenden können. Dieser ist für Videoclips und Audiodaten nicht anwendbar.
Hinweis
Fotos animieren mit StageTools Mit dem Plug-in StageTools haben Sie ein einfaches Werkzeug, Fotos zu animieren, sodass es aussieht, als hätten Sie einen Kameraschwenk oder Zoom mit dem Bild gemacht. Um das Plug-in zu benutzen, gehen Sie wie folgt vor: StageTools funktioniert nur mit Bildern und Fotos auf der Timeline. Das Plug-in ist nicht verfügbar bzw. aufrufbar, wenn Sie einen Videoclip auswählen statt eines Bildes oder Fotos.
369
Hinweis
Anhang – Pinnacle Studio HD Ultimate- und Ultimate Collection-Plug-ins 1. Platzieren Sie ein oder mehrere Standbilder bzw. Fotos auf die Timeline. Danach wählen Sie das zu animierende Bild mit der Maus aus und öffnen die Videoeffekte in der Video-Toolbox aus dem Menü Toolbox/Videoeffekte hinzufügen. 2. Wählen Sie unter Kategorie StageTools und dann unter Effekt MovingPicture aus und klicken Sie auf OK, um den Effekt anzuwenden.
Abbildung A.39: Rufen Sie StageTools über die Videoeffekte in der Video-Toolbox auf
3. Klicken Sie auf MovingPicture bearbeiten, um den Effekt zu steuern.
Abbildung A.40: Den Editor können Sie öffnen, indem Sie auf den Knopf neben MovingPicture bearbeiten klicken
Ein neues Fenster wird geöffnet, in dem die Bewegungen verändert werden können.
Abbildung A.41: Der Editor von StageTools MovingPicture wird geöffnet
370
Fotos animieren mit StageTools Grundsätzlich funktioniert MovingPicture so, dass Sie einen Bildausschnitt am Anfang des Bildes wählen und einen am Schluss des Bildes. Das bedeutet, dass die Länge des Bildes auf der Timeline maßgebend ist. Mit MovingPicture müssen Sie also mindestens einen Anfangs- und einen Endpunkt definieren, damit das Bild animiert werden kann. 4. Sie können den sichtbaren Bereich vergrößern oder verkleinern, indem Sie das gelbe Viereck vergrößern bzw. verkleinern.
Abbildung A.42: Skalieren Sie den sichtbaren Bereich, indem der Rahmen mit der Maus gezogen wird
5. Sie können den sichtbaren Bereich verschieben, indem Sie das gelbe Viereck mit der Maus verschieben. Klicken Sie dazu in den viereckigen Bereich und ziehen Sie diesen mit der Maus an die gewünschte Stelle.
Abbildung A.43: Bewegen Sie den sichtbaren Bereich, indem Sie den Rahmen mit der Maus verschieben
371
Anhang – Pinnacle Studio HD Ultimate- und Ultimate Collection-Plug-ins Auf diese Art verändern Sie den sichtbaren Bereich, wie dies im Vorschaufenster zu sehen ist. Sie verändern die Position des Bildes zum Anfangspunkt.
Abbildung A.44: Das Vorschaufenster zeigt den gewählten Bereich an
Im Vorschaufenster können Sie immer den sichtbaren Bereich, der im Film zu sehen ist, überwachen. Im unteren rechten Bereich von StageTools sehen Sie eine sogenannte Timeline mit einer Schlüsselposition am linken Rand.
Abbildung A.45: Auf der Timeline sind die Schlüsselbilder zu sehen, zuerst mindestens eines am Anfang der Timeline
Die oben gemachten Veränderungen beziehen sich alle auf das erste Bild der animierten Sequenz. 6. Nun ist es sinnvoll, einen Endpunkt festzulegen, bis zu dem das Bild bzw. das Foto animiert werden soll. Klicken Sie dazu mit der Maus ans rechte Ende der Timeline und verschieben Sie so die vertikale rote Linie. Wenn Sie nun das gelbe Fenster verändern, also verschieben und skalieren, dann entsteht an der Endposition ein neues Schlüsselbild.
Abbildung A.46: Am Ende der Timeline erscheint ein weiteres Schlüsselbild, sobald die vertikale Linie dort platziert wird und der sichtbare Bereich verändert wurde.
Sie können nun im Vorschaufenster auf das kleine, nach rechts weisende Dreieck klicken und sehen dann eine Vorschau des soeben erstellten Effekts. Der gewählte Ausschnitt bewegt sich über das Bild, als hätte man eine Kamerabewegung vollzogen. Natürlich können Sie auf der Timeline noch weitere Schlüsselbilder und Positionen erstellen, sodass sich die Kamera auf dem Bild hin- und herbewegt. 7. Wenn Sie den Editor schließen und die Änderungen übernehmen möchten, wählen Sie aus dem Menü File den Eintrag Apply Moves and Close. Die soeben gemachten Veränderungen werden auf die Timeline von Studio übernommen. Wenn Sie dies nicht möchten, dann wählen Sie Quit – DON’T Apply changes.
372
Fotos animieren mit StageTools 8. Spielen Sie nun den Film auf der Timeline ab, um den soeben erstellten Effekt zu überprüfen. Sie können diesen Effekt nun für alle anderen Bilder und Fotos anwenden, die Sie animieren möchten. Aus statischen Bildern erstellen Sie so eine bewegte Diaschau.
Vitascene installieren Vitascene von proDAD ist eine Sammlung von Videoeffekten, um Videos weiter zu verändern, zu verbessern und um Effekte hinzuzufügen. Das Plug-in lässt sich etwas einfacher installieren als die beiden anderen. Hierzu legen Sie einfach die Plug-ins-CD von Pinnacle Studio 11 Ultimate in Ihr Laufwerk ein und starten das Setup. Dabei erkennt Vitascene, dass Pinnacle Studio 15 auf dem PC installiert ist, und kopiert die nötigen Daten in das entsprechende Verzeichnis. Gehen Sie dazu wie folgt vor: 1. Beenden Sie ggf. Pinnacle Studio 15. 2. Legen Sie die Pinnacle Studio Ultimate Install CD in ein Laufwerk Ihres PCs ein und starten Sie das Setup.
Abbildung A.47: Wählen Sie Programm reparieren, um die Installation von Vitascene noch einmal zu starten
3. Wählen Sie Programm reparieren und klicken Sie auf Weiter. 4. Wenn das Installationsfenster von Vitascene erscheint, klicken Sie auf Weiter und danach auf Ich bin mit der Lizenzvereinbarung einverstanden. 5. Belassen Sie im nächsten Schritt den Installationspfad, wie dieser vorgeschlagen wird, und klicken Sie dann auf Weiter.
373
Hinweis
Anhang – Pinnacle Studio HD Ultimate- und Ultimate Collection-Plug-ins
Abbildung A.48: Wählen Sie aus, für welche Studio-Version Sie das Plug-in installieren möchten
6. Setzen Sie die Häkchen für jede installierte Studio-Version. Es reicht, wenn Sie nur Plugin für Pinnacle Studio 15 wählen. Klicken Sie dann auf Weiter. 7. Im nächsten Schritt klicken Sie auf Installationsvorgang starten. Die Übertragung der Daten beginnt, d.h., die nötigen Dateien werden in die Verzeichnisse auf der Festplatte kopiert. 8. Wählen Sie im letzten Schritt fertigstellen, beenden und danach fertigstellen. 9. Starten Sie nun Pinnacle Studio 15 neu und öffnen Sie die Videoeffekte im Menü Toolbox/Videoeffekte hinzufügen.
Abbildung A.49: Das Vitascene-Plug-in befindet sich nun in den Videoeffekten von Studio 15
374
Die proDAD Vitascene-Übergangseffekte-Bibliothek
Die proDAD Vitascene-ÜbergangseffekteBibliothek In Studio Ultimate Version 11 sind einige zusätzliche Übergangseffekte in der proDAD Vitascene-Bibliothek enthalten. Diese können Sie wie folgt anwenden. 1. Wählen Sie aus dem Album das Register für die Übergangseffekte oder wählen Sie aus dem Menü Album den Eintrag Übergänge. 2. Wählen Sie aus der Liste unter Übergänge mit der Maus den Eintrag proDAD aus.
Abbildung A.50: Wählen Sie die proDAD-Effekte-Gruppe aus
3. Im Album ist nun ein Effekt zu sehen. Es handelt sich hierbei um einen Effekte-Editor, der im nächsten Schritt geöffnet werden kann. Dort wird dann der gewünschte Effekt ausgewählt. Ziehen Sie nun diesen Effekt zwischen zwei Clips, bei denen der Übergangseffekt angewendet werden soll.
Abbildung A.51: Ziehen Sie den VITA-Effekt zwischen zwei Clips
375
Anhang – Pinnacle Studio HD Ultimate- und Ultimate Collection-Plug-ins 4. Doppelklicken Sie nun mit der linken Maustaste auf den Effekt, sodass die VideoToolbox geöffnet wird.
Abbildung A.52: Doppelklicken Sie auf den Effekt auf der Timeline und dann auf Bearbeiten, um den VITA-Editor zu öffnen
5. Klicken Sie nun mit der Maus auf Bearbeiten, um den Vitascene-Editor zu öffnen.
Abbildung A.53: Der Vitascene-Editor öffnet sich, Sie können nun einen Effekt für den Übergang auswählen
6. Wählen Sie nun aus den Transition-Vorlagen einen Ordner aus, damit die verfügbaren Effekte angezeigt werden.
376
Die proDAD Vitascene-Übergangseffekte-Bibliothek
Abbildung A.54: Wählen Sie eine Effekte-Gruppe aus den Transitions aus
7. Doppelklicken Sie mit der Maus auf einen Effekt. Dieser wird sofort im rechten Vorschaufenster dargestellt. 8. Im unteren Bereich können Sie den Effekt mit den verfügbaren Schiebereglern individuell einstellen.
Abbildung A.55: Den Effekt anpassen
9. Sobald Sie den Effekt nach Ihren Wünschen angepasst haben, können Sie den Editor mit (F12) verlassen, oder Sie wählen aus dem Menü Datei den Eintrag zurück zum Schnittprogramm aus. 10. Sie können den Effekt nun begutachten, indem Sie das Video abspielen. Wenn Sie den Effekt entfernen möchten, löschen Sie einfach den Übergang. Um den Effekt anzupassen bzw. zu verändern, klicken Sie einfach erneut auf Bearbeiten, um den Vitascene-Editor zu öffnen.
377
Anhang – Pinnacle Studio HD Ultimate- und Ultimate Collection-Plug-ins
Die proDAD Vitascene-Effekte-Bibliothek Neben den proDAD Vitascene-Übergangseffekten gibt es noch Vitascene Filter für die Anwendung auf einzelne Videoclips. Setzen Sie die Effekte wie folgt ein: 1. Platzieren Sie einen Videoclip auf die Timeline oder wählen Sie mit der Maus einen bestehenden aus. Klicken Sie dann auf die Video-Toolbox und öffnen Sie die Videoeffekte oder wählen Sie aus dem Menü Toolbox den Eintrag Videoeffekte hinzufügen. 2. Wählen Sie unter Kategorie proDAD und unter Effekt Vitascene Filter. Klicken Sie dann auf OK, um den Effekt auf den gewählten Clip anzuwenden.
Abbildung A.56: Wählen Sie proDAD und dann Vitascene Filter
3. Klicken Sie mit der Maus auf das kleine Symbol neben Vitascene Filter Bearbeiten.
Abbildung A.57: Mit einem Klick auf das Symbol starten Sie den Editor
4. Der Vitascene-Effekte-Editor öffnet sich. Wählen Sie nun eine Kategorie aus, indem Sie die Liste unter Vorlagen anzeigen lassen.
378
Die proDAD Vitascene-Effekte-Bibliothek
Abbildung A.58: Wählen Sie eine Filtergruppe aus
5. Sie können den Effekt auf den Clip übernehmen, indem Sie (F12) drücken oder aus dem Menü Datei den Eintrag zurück zum Schnittprogramm wählen.
Effekt mit Keyframes anpassen In Vitascene haben Sie die Möglichkeit, einen Effekt über die Zeitachse zu verändern. Das heißt, dass der Effekt nicht über die ganze Dauer des Videoclips gleich sein muss, sondern mittels Keyframes bzw. Schlüsselbildern beeinflusst werden kann. Am besten kann dies veranschaulicht werden, wenn Sie das folgende Beispiel nachmachen. 1. Wählen Sie einen Vitascene-Effekt auf einen Clip auf der Timeline an, wie dies im oberen Abschnitt beschrieben wurde. 2. Stoppen Sie die Vorschau mit einem Klick auf den abspielen/stoppen-Button. 3. Achten Sie darauf, dass bei Keyframes ein Haken gesetzt ist. Platzieren Sie nun die vertikale Linie an die Position, an der der Effekt verändert werden soll.
Abbildung A.59: Die vertikale Nadel an die gewünschte Position platzieren
379
Anhang – Pinnacle Studio HD Ultimate- und Ultimate Collection-Plug-ins 4. Verändern Sie die Parameter des gewählten Effekts, indem Sie die Schieberegler verändern, bis Sie das gewünschte Resultat erhalten. Beobachten Sie, wie auf der kleinen Timeline ein neuer Keyframe erstellt wird. Vitascene verändert nun die Parameter von Keyframe zu Keyframe, sodass es einen weichen Übergang gibt. Sie können analog noch weitere Keyframes hinzufügen.
Abbildung A.60: Verändern Sie in der Bildmitte die Parameter, um einen neuen Keyframe zu erstellen
5. Sie können den Effekt auf den Clip übernehmen, indem Sie (F12) drücken oder aus dem Menü Datei den Eintrag zurück zum Schnittprogramm wählen.
380
Stichwortverzeichnis 10-Sekunden-Regel 76 2D Editor 234 2D-Übergänge 128 3DStroke 356 3GP 273, 302
A Advanced Video Codec High Definition 25 Album 88 Albumansicht ändern 100 Alles löschen 126 Alter Film 232 Analoge Aufnahme 78 Analoge Ausgabe 278 Animation 180, 191, 229 Anzeigedauer 139 Archivieren 285 Audio 346 Audioaufnahme 208 Audiobearbeitung 195 Audio-CD importieren 210 Audiodatei 264 Audioeffekte 213, 329 Geschwindigkeit 214 Audio-Scrubber 117, 203 Audiospuren 111 Audio-Toolbox 199 Aufnahme starten 82 Aufnahmequalität 75, 81 Ausgabe 258 auf ein Band 275 Ausrichtung 172, 324 Authoring 241 Autom. Szenenindex 244
Automatisch speichern 53 Automatische Farbkorrektur 224 AVCHD 25, 259, 300, 303 AVI 81, 264 AVI-Dateien 298
B Balance 199 Band erstellen 275 Band vorcodieren 76 Bandsteuerung 77 Bewegter Hintergrund 252 Bewegungsunschärfe 234 BIAS 364 Bild drehen 193, 313 Bildformate 187 Bild-in-Bild 219 Bildschirmschoner 29 Blendenfleck 235 Blu-ray 242 Blu-ray Disc 258, 261 Blu-ray-Brenner 242 Breitbandrauschen 365 Brennen 260 Brummen 365 Buntglas 233
C CD 258 CD importieren 210 Chroma-Key-Funktion 222 Clip-Eigenschaften 121 Clipreihenfolge 115 Clipvorschau 100
Codecs 297 Collection-Plug-ins 351 Content-Ordner 313
D Datei 100, 263 exportieren 274 Daten löschen 292 Defragmentieren 30 Demoversion 333 Diashow 187 Digital Versatile Disc 241 Digital-Analog-Digital 22 Digitale Ausgabe 276 Digitalisierung 22 Disc-Image 261, 292 Disc-Menüs 243 DivX 265 Drehen 170, 193, 228 DV (AVI) 298 DVD 241 Vorlagen 243 Vorschau 253 DV-Qualität 75
E eBook 333 Echtzeit 45 Effekte 196, 314 Eigene Dateien 27 Einführung 47 Einstellungen 51, 65 End Search 77 Erdbeben 235 Exportieren 257, 347, 348
381
Stichwortverzeichnis
F Fade-in 201 Farbfilter 359 Farbkorrektur 224, 237,
359 Farbverlauf 150 FAT32 30 Feinschnitt 109 Festplattenkonfiguration 29 Film erstellen 257 FireWire 73 Flash-Video 266, 302 Formate 297 Foto animieren 191 Fotos 345
G Grafikkarte 24 Grollen 365 Grundlagen 87 Grundsätzliches 40 Grundvoraussetzungen 24
H H.264-Codec 25 Harter Übergang 127 HD-DVD 262 HDV 298 High Definition 25, 298 High Density Digital Versatile Disc 262 Hintergrundfarbe 178 Hintergrundmusik 211, 253 Hintergrund-Rendering 57 Hollywood FXPaket 128, 231
I Import-Funktion 63 Importieren 63, 97 Importieren ab DVDVideo 82
382
Insert-Schnitt 115 Installation 32 Instant Save 53 Internetupload 349 Invertieren 237 iPod 270
J J-Schnitt 119 Justierungsziehpunkt 198
K Kapitel 245 Keyframe 229 Knoll Light Factory 352 Konverter 22 konvertieren 305 Kostenlose Videoeffekte 331
L Länge ändern 139 Lauftitel 160 Lautstärke 197, 200 Listenansicht 91 Looks-Plug-In 359 Löschen 107, 285, 294, 341 Löschen eines Clips 125 L-Schnitt 118 Lupe 236
Miniaturschaltflächen 249 Miniatur-Vorschaubild 310 MiniDV 72 MiniDV-Band 72 Mittelstück entfernen 117 Mobiltelefon 273 Montagethemen 135 Montagethemeneinstellungen 137 Motion-Titeleditor 165 Moviebox 23 Moviebox Plus USB 23 MovingPicture 363 MP3 197 MPEG-1 267 MPEG-2 267 MPEG-2 TS 269 MPEG-4 269 MPEG-Aufnahme 82 MPEG-Kompression 258 MPEG-Video 298 MultiLayer-Mix 135 Musik 195, 196, 346
N Nächste 252 Neue Funktionen 41 Normale Schaltfläche 251 NTFS 30 NTSC 81 NVIDIA 25
M
O
Magic Bullet Looks 358 Marker benennen 124 Markierungen 123 Master-Volume 202 Menü 241 Menüleiste 87 Menütyp 244 Metainformationen 73 Mikrofon 205 Mikrofoneinstellungen 60 Mindestsystemvoraussetzungen 25
Oberfläche 87 Oberflächenfarbe 150 Objekte 171 Onboard-Grafikkarten 25 Optimierung 23, 26 Optionen 67 Ordner auswählen 65 Overlaytitel 152, 163
Stichwortverzeichnis
P
S
PAL 81 Pan 193 Pan und Zoom 228 Particular 357 PC-Auslastung 303 Pegelanzeige 200 Plug-ins 351 Positionieren 159, 169 Posterisieren 237 Prägung 233 Präsentieren 290 Premium-Funktionen 54 proDAD 363, 378 Programmversionen 19 Projekt archivieren 286 Projekt erstellen 49 Projekt löschen 296 Projekt wiederherstellen 288 Projektcontainer 104 Projekte löschen 292 Projekte sichern 41 Projektformat 54 PSP 272
Schaltflächen 249, 251 Schatten 151, 220 Schnappschuss 85 Schneiden 341 Schnitt 116 Schnitttechniken 118 Schriftart 147, 172 Schriftart anpassen 138 Schriftgröße 172 Schwarze Ränder 190 Schwarze Ränder entfernen 118 Schwarz-Weiß 238 Scorefitter 211 Scrubber 110, 111 SECAM 81 Seitenverhältnis 81 Shared-Memory 25 Shine-Leuchten 354 Sichern 41, 285 Skalieren 169 SmartMovie 239 SmartSound 211 Softener 233 Softwareversionen 19 Sony PlayStation 272 Soundeffekte 195 Soundeffekte-Spur 196 SoundSoap 363 Speichern 51, 96 Spuren sperren 111 Stabilisieren 225 StageTools 368 Standarddauer 55 Standardlänge 131, 189 Standardtitel 143 Standbilder 187, 345 aufnehmen 217 Stereo 199 Stereoeffekt 199 Stop Motion 84 Störgeräusche 365 Storyboard 90
R Rand 220 Rauschunterdrückung 214, 225 RealMedia 271 Red Giant 352 Registrieren 33 Reihenfolge ändern 103 Render-Dateien 52 Rendering 45, 47, 57 Rohmontage 102 Rolltitel 160, 327 Root-Schaltfläche 252 Rote Augen 194 RTFx 231 Rückgängig 96 Rücksprung 247 Rückwärtslaufen lassen 320
Studio HD 19 Surround 202 Surround Sound 58 S-Video-CD 259 Szene suchen 101 Szenen 100 Szenen anzeigen 104 Szenen suchen 311 Szenen umbenennen 101 Szenenerkennung 67, 68
T Tastenkürzel 316 Temporäre Daten 51, 292 Textausrichtung 174 Textelemente 171 Textfluss 174 Textlayout 174 Timecode 76 Timeline 90, 109 Timeline-Scrubber 110 Tipps & Tricks 303 Titel 143, 344 Titel-Editor 167 Titellayout 146 Titelschrift 147 Titelspur 111 Titelvorschau 182 ToonIt Roto 353 Transparenz 151, 220, 321 Trapcode 354 Trimmen 120, 122, 341 TV-Norm 81
U Übergänge 127 Übergangseffekte 343 Übertrage Content 315 Umbenennen 51 Umrandung 151 Unterschiede 21 Updates 40 Upload 279
383
Stichwortverzeichnis
V Vergrößern 112 Verketten 158 Verkleinern 112 Verknüpfen von DVDMenüs 254 Versionen 19 Verzeichnisstruktur 47 Video trimmen 140 Video-CD 259 Videoeffekte 223, 351 Videoformate 297 VideoSpin 333, 335 Videospur 110 Video-Toolbox 217 Videotransparenz 220 Videovorschau 56 Vista 25 Vitascene 363, 378 Vollbildtitel 163
384
Vorherige 252 Vorlage 143, 243 Vorlagen-Titel 143 Vorschau 253 Vorschaubild verändern 115 Vorschaufenster 91 VST Plugins 329
W Wassertropfen 236 Wasserwellen 236 Weichzeichnen 234 Weißabgleich 238 Weitergeben 285 Wiederherstellen 41, 96, 285 Windows 7 25 Windows Media 273 Windows Media Audio 197 Windows XP 24
Y Yahoo! Video 282 YouTube 279
Z Zeichentrickfilm 353 Zeitleiste 110 Zeitlupe 227 Zeitraffer 227 Ziehpunkt 198 Zoom 192 Zoomwerte einstellen 113 Zurück zum Menü 247 Zuschnitt 221 Zweite Videospur 115, 218
Copyright Daten, Texte, Design und Grafiken dieses eBooks, sowie die eventuell angebotenen eBook-Zusatzdaten sind urheberrechtlich geschützt. Dieses eBook stellen wir lediglich als persönliche Einzelplatz-Lizenz zur Verfügung! Jede andere Verwendung dieses eBooks oder zugehöriger Materialien und Informationen, einschliesslich x
der Reproduktion,
x
der Weitergabe,
x
des Weitervertriebs,
x
der Platzierung im Internet, in Intranets, in Extranets,
x
der Veränderung,
x
des Weiterverkaufs
x
und der Veröffentlichung
bedarf der schriftlichen Genehmigung des Verlags. Insbesondere ist die Entfernung oder Änderung des vom Verlag vergebenen Passwortschutzes ausdrücklich untersagt! Bei Fragen zu diesem Thema wenden Sie sich bitte an:
[email protected] Zusatzdaten Möglicherweise liegt dem gedruckten Buch eine CD-ROM mit Zusatzdaten bei. Die Zurverfügungstellung dieser Daten auf unseren Websites ist eine freiwillige Leistung des Verlags. Der Rechtsweg ist ausgeschlossen. Hinweis Dieses und viele weitere eBooks können Sie rund um die Uhr und legal auf unserer Website http://www.informit.de herunterladen