WATER RESEARCH A Journal of the International Water Association
Editor-in-Chief Mark van Loosdrecht Delft University of Technology Department of Biochemical Engineering Julianalaan 67 2628 BC Delft The Netherlands Tel: +31 15 27 81618 E-mail:
[email protected]
Editors J. Block Université H. Poincaré, Nancy I France David Dixon University of Melbourne Australia Hiroaki Furumai The University of Tokyo Japan Xiaodi Hao Beijing University of Civil Engineering and Architecture China Gregory Korshin University of Washington USA Anna Ledin Formas Sweden Eberhard Morgenroth Swiss Federal Institute of Aquatic Science and Technology (EAWAG) Switzerland W. Rauch University Innsbruck Austria Maria Reis Universidade Nova de Lisboa/FCT Portugal Hang-Shik Shin Korea Advanced Institute of Science and Technology Korea Thomas Ternes Bundesanstalt für Gewässerkunde Germany Stefan Wuertz Univ. of California, Davis USA
Associate Editors Andrew Baker University of New South Wales Australia
Damien Batstone The University of Queensland Australia G-H. Chen The Hong Kong University of Science & Technology Hong Kong China Tom Curtis Univ. of Newcastle upon Tyne UK Ana Deletic Monash University USA Francis de los Reyes III North Carolina State University USA Rob Eldridge The University of Melbourne Australia Rosina Girones University of Barcelona Spain Stephen Gray Victoria University Australia Kate Grudpan Chiang Mai University Thailand E.E. Herricks University of Illinois - Urbana USA Peter Hillis United Utilities Plc UK H-Y. Hu Tsinghua University China P.M. Huck University of Waterloo Canada Bruce Jefferson Cranfield University UK Ulf Jeppsson Lund University Sweden Sergey Kalyuzhnyi Moscow State University Russian Federation Jaehong Kim Georgia Institute of Technology USA Jes La Cour Jansen Lund Institute of Technology Sweden G. Langergraber BOKU/Univ. of Natural Res. and Applied Life Scs. Austria S-L. Lo National Taiwan University Taiwan Dionisis Mantzavinos Technical University of Crete Greece
Y. Matsui Hokkaido University Japan A. Maul Université Paul Verlaine-Metz France Max Maurer EAWAG Switzerland How Yong Ng National University of Singapore Singapore Satoshi Okabe Hokkaido University Japan S.L. Ong National University of Singapore Singapore Jong M. Park Pohang University of Science & Technology Korea Susan Richardson U.S. Environmental Protection Agency USA Miguel Salgot University of Barcelona Spain David Sedlak University of California, Berkeley USA Jean-Philippe Steyer LBE-INRA France M. Takahashi Hokkaido University Japan Kai Udert EAWAG Switzerland V.P. Venugopalan BARC Facilities India E. von Sperling Federal University of Minas Gerais Brazil Hanqing Yu University of Science & Technology of China China J. Zilles University of Illinois Urbana USA A.I. Zouboulis Aristotle University Greece
Editorial Office Mailing address Water Research Radarweg 29 1043 NX Amsterdam The Netherlands Tel: 31 20 485 2701 Fax: 31 20 485 2521; 31 20 485 3264 E-mail:
[email protected]
Publication information: Water Research (ISSN 0043-1354). For 2011, volume 45 is scheduled for publication. Subscription prices are available upon request from the publisher or from the Elsevier Customer Service Department nearest you or from this journal’s website (http://www.elsevier.com/locate/watres). Further information is available on this journal and other Elsevier products through Elsevier’s website (http://www.elsevier.com). Subscriptions are accepted on a prepaid basis only and are entered on a calendar year basis. Issues are sent by standard mail (surface within Europe, air delivery outside Europe). Priority rates are available upon request. Claims for missing issues should be made within six months of the date of dispatch. Author Enquiries: Please visit this journal’s homepage at http://www.elsevier.com/locate/watres. You can track accepted articles at http://www.elsevier.com/ trackarticle and set up e-mail alerts to inform you of when an article’s status has changed. Also accessible from here is information on copyright, frequently asked questions and more. Contact details for questions arising after acceptance of an article, especially those relating to proofs, will be provided by the publisher. Orders, claims, and journal enquiries: Please contact the Elsevier Customer Service Department nearest you: St. Louis: Elsevier Customer Service Department, 11830 Westline Industrial Drive, St. Louis, MO 63146, USA; phone: (877) 8397126 [toll free within the USA]; (+1) (314) 4537076 [outside the USA]; fax: (+1) (314) 5235153; e-mail:
[email protected] Oxford: Elsevier Customer Service Department, The Boulevard, Langford Lane, Kidlington OX5 1GB, UK; phone: (+44) (1865) 843434; fax: (+44) (1865) 843970; e-mail:
[email protected] Tokyo: Elsevier Customer Service Department, 4F Higashi-Azabu, 1-Chome Bldg, 1-9-15 Higashi-Azabu, Minato-ku, Tokyo 106-0044, Japan; phone: (+81) (3) 5561 5037; fax: (+81) (3) 5561 5047; e-mail:
[email protected] Singapore: Elsevier Customer Service Department, 3 Killiney Road, #08-01 Winsland House I, Singapore 239519; phone: (+65) 63490222; fax: (+65) 67331510; e-mail:
[email protected] Application for membership of International Water Association should be made to: Executive Director, IWA, Alliance House, 12 Caxton Street, London SW1H 0QS, U.K. (Tel.: +44 207 654 5500; Fax: +44 207 654 5555; e-mail:
[email protected]; website: http://www.IWAhq.org.uk). Registered Charity (England) No. 289269. Individual membership is available from £30 upwards. For details contact IWA.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 0 5 e1 0 1 4
Available at www.sciencedirect.com
journal homepage: www.elsevier.com/locate/watres
Influence of sampling strategies on the monitoring of cyanobacteria in shallow lakes: Lessons from a case study in France David Pobel a, Joe¨l Robin a, Jean-Franc¸ois Humbert b,* a b
ISARA-Lyon, Equipe Ecosyste`mes et Ressources Aquatiques, 23 rue Jean Baldassini 69364 Lyon Cedex 07, France INRA, UMR 7618 BIOEMCO, Site de l’ENS, 46 rue d’Ulm, 75005 Paris, France
article info
abstract
Article history:
Sampling cyanobacteria in freshwater ecosystems is a crucial aspect of monitoring programs
Received 6 August 2010
in both basic and applied research. Despite this, few papers have dealt with this aspect, and
Received in revised form
a high proportion of cyanobacteria monitoring programs are still based on monthly or twice-
5 October 2010
monthly water sampling, usually performed at a single location. In this study, we conducted
Accepted 10 October 2010
high frequency spatial and temporal water sampling in a small eutrophic shallow lake that
Available online 20 October 2010
experiences cyanobacterial blooms every year. We demonstrate that the spatial and temporal aspects of the sampling strategy had a considerable impact on the findings of
Keywords:
cyanobacteria monitoring in this lake. In particular, two peaks of Aphanizomenon flos-aquae
Sampling strategy
cell abundances were usually not picked up by the various temporal sampling strategies
Cyanobacteria
tested. In contrast, sampling once a month was sufficient to provide a good overall estima-
Spatiotemporal dynamic
tion of the population dynamics of Microcystis aeruginosa. The spatial frequency of sampling
Microcystis aeruginosa
was also important, and the choice in the location of the sampling points around the lake was
Aphanizomenon flos-aquae
very important if only two or three sampling points were used. When four or five sampling points were used, this reduced the impact of the choice of the location of the sampling points, and allowed to obtain fairly similar results than when six sampling points were used. These findings demonstrate the importance of the sampling strategy in cyanobacteria monitoring, and the fact that it is impossible to propose a single universal sampling strategy that is appropriate for all freshwater ecosystems and also for all cyanobacteria. ª 2010 Elsevier Ltd. All rights reserved.
1.
Introduction
Due to eutrophication and, to a lesser extent, to climatic changes (Markensten et al., 2010; Paerl and Huisman, 2009) cyanobacterial blooms seem to be increasing in freshwater ecosystems worldwide. These blooms severely disrupt the functioning of these ecosystems and potential water use. Furthermore, many cyanobacterial species are able to produce a variety of toxic metabolites, which can be harmful to both human (Kuiper-Goodman et al., 1999) and animal (Codd et al.,
2005) health. For these reasons, numerous attempts have been made in the last 20 years to elucidate the factors that control cyanobacterial blooms and toxin production, and thus to make it possible to evaluate better the health risks associated with bloom events. From all these studies, it is clear that the spatial distribution of cyanobacteria in freshwater ecosystems can display marked horizontal and vertical variations (Porat et al., 2001; Welker et al., 2003). Moreover, by means of a real-time PCR analysis of a gene involved in the biosynthesis of microcystins we have shown that considerable fluctuations
* Corresponding author. E-mail address:
[email protected] (J.-F. Humbert). 0043-1354/$ e see front matter ª 2010 Elsevier Ltd. All rights reserved. doi:10.1016/j.watres.2010.10.011
1006
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 0 5 e1 0 1 4
can also occur in the proportions of potentially microcystinproducing and non-producing cells during the course of Microcystis aeruginosa blooms (Briand et al., 2009). Similar results have been found for various M. aeruginosa populations located in the same geographic area (Sabart et al., 2009), which makes it difficult to manage the health risks associated with these events. All these studies indicate that the sampling strategy used for monitoring cyanobacteria is a critical aspect, both in basic research on cyanobacteria, (e.g. investigation of the factors and processes involved in the development of the blooms), and in applied research, (e.g. implementing monitoring programs of these microorganisms in freshwater ecosystems used to provide drinking water or for recreational activities). In recent years, new tools have been tested with the intention of improving cyanobacterial sampling, for example, remote sensing reconnaissance to determine the horizontal distribution of cyanobacteria in freshwater ecosystems (Hunter et al., 2009), or spectrofluorometric probes to reveal the vertical distribution of these cyanobacteria in the water column (Leboulanger et al., 2002). Moreover, these spectrofluorometric probes and other sensors have now been integrated into buoys, to provide real-time monitoring of cyanobacteria in freshwater ecosystems (Le Vu et al., in press). However, despite the great potential interest of these tools, their cost will remain prohibitive for their routine use in the foreseeable future, and most of the monitoring programs worldwide for the survey of cyanobacteria will continue to be based on more conventional methods for some years to come. Taking discrete samples of various volumes of water taken from the shoreline of ecosystems is probably the method one most often used in studies. Unfortunately, as a result of spatial and temporal differences in the distribution of cyanobacteria, this approach can often provide a very poor estimation of cyanobacterial abundance and, consequently, of the associated health risk. We therefore need to devise simple sampling strategies for the low cost monitoring of cyanobacteria in shallow lakes. In an attempt to do this, we performed intense spatiotemporal monitoring of cyanobacteria in a shallow lake known to experience cyanobacterial blooms every year.
2.
Materials and methods
2.1.
Study site
This study was performed in a shallow lake named Place (0.08 km2, 2.5 m max depth, 45 430 N, 4 140 E) located in the plain of Forez (Central France), (Fig. 1). This lake is used for extensive fish production and its trophic status is eutrophic to hypereutrophic (OCDE, 1982). M. aeruginosa blooms occur every summer.
2.2.
Data acquisition
2.2.1.
Sampling strategy and cell counting
In order to assess the variations in the horizontal distribution of cyanobacteria in this pond, we monitored six sampling points located around the lake at 1 m from the shore (V1eV6; Fig. 1). The water depth in each of these sampling points was around 1 m. Samples were taken every two days, between 09:00 and 10:00 a.m., from early June 2008 to early October 2008. The first 40-cm of the water column were sampled using a water sampler (Uwitech, Austria). This water sample was shacked and then divided into two 1-L bottles, 1 L being stored at room temperature with Lugol’s iodine solution, and the other at 4 C. In order to evaluate the diel variations in the subsurface cyanobacterial biomass, we performed a 22-h survey (from 4:30 p.m. August 4, 2009 to 2:30 p.m. August 5, 2009) at five sampling points (AeE; Fig. 1) using a BBE Algaetorch (Moldaenke, Germany). This torch is based on the same principle as the BBE spectrofluorometric probe (Beutler et al., 2002), but provides only an estimation of the concentrations of cyanobacteria and total chlorophyll in water. Every hour, the torch was immersed to a depth of 20 cm at the five sampling points, and triplicate measurements were performed in each point. The cyanobacterial cell concentrations were estimated using a Nageotte cell and an optical microscope, as described in Brient et al. (2008). For each rectangular area, we counted at least 400 cells of each cyanobacterial species..
Fig. 1 e Geographical location of the study site in France (left), and of the sampling points in the lake (right).
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 0 5 e1 0 1 4
2.2.2.
Meteorological data
The speed and direction of wind during our study were obtained from the Mete´o France meteorological station at St Etienne-Bouthe´on (45 32’N e 4 18’E). The wind direction rose for this station is given in Supplemental Figure 1, and shows that the two dominant wind directions were NW and SE. The direction of winds blowing from 240 e60 was classified as NW, and that of winds blowing from 60 e240 as SE.
2.3.
Data analysis
The spatial distribution of cyanobacteria in the lake was represented using Surfer (v. 7.0, Golden Software Inc.), and statistical analyses (Wilcoxon test, Spearman correlation) were performed using the R package version 2.10 (R development core Team, 2010).
3.
1007
Results
3.1. Change over time in the population dynamics of the two dominant cyanobacterial species Two cyanobacterial species, M. aeruginosa and Aphanizomenon flos-aquae, dominated the phytoplankton community during the summer of 2008. The population dynamics of these two species displayed very contrasting patterns (Fig. 2). The population dynamics of M. aeruginosa was characterized by a steady increase in the cell abundance from June to August, apart from a brief dip in the middle of July. The maximum population was reached on August 21 (264,000 cells/mL), and subsequently the cell concentration remained stable until the end of September, and then decreased in October. In contrast,
Fig. 2 e Changes over time of the concentrations of M. aeruginosa (top) and A. flos-aquae (bottom). These concentrations were estimated by calculating the average cell count for the six samples at each date. The error bars indicate the standard deviation.
1008
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 0 5 e1 0 1 4
the population dynamics of A. flos-aquae was much more chaotic, with the cell abundance reaching two very high and short-lived peaks in July (400,000 cells/mL on July 17, and 560,000 cells/mL on July 23).
Our assessment of the changing population dynamics of the two cyanobacteria was obtained using a very frequent high temporal sampling regime (every two days), which would not be practicable in the context of normal monitoring programs. In
order to evaluate the impact of the sampling frequency, we simulated weekly, twice-monthly and monthly sampling frequencies to our data set. The results of these simulations are shown in Figs. 3 and 4. From these figures, we can see that changes in M. aeruginosa cell abundance over time would have been fairly accurately estimated at all these sampling frequencies. Moreover, for all sampling frequencies, the quality of the estimation of the M. aeruginosa population dynamics was not influenced by choice of the first sampling date (Fig. 3). In contrast, the population dynamics of A. flos-aquae would have been badly or even very badly estimated by using weekly, twice-monthly and monthly sampling frequencies (Fig. 4). We
Fig. 3 e Simulation of the change over time of M. aeruginosa cell concentrations found using a weekly (top), twicemonthly (middle) or monthly sampling frequency (bottom), with lags for the first sampling day of zero days (_), 2 days (ee) and 4 days (..) comparing to our first sampling day. The gray curve corresponds to the reference data.
Fig. 4 e Simulation of the change over time of the biomass of A. flos-aquae found using a weekly (top), twice-monthly (middle), or monthly sampling frequency (bottom), and with lags for the first sampling day of zero days (_), 2 days (ee) and 4 days (..) comparing to our first sampling day. The gray curve corresponds to the reference data.
3.2. Influence of sampling frequency on the estimation of the population dynamics
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 0 5 e1 0 1 4
1009
would only have detected both A. flos-aquae peaks in one of the three trials testing the weekly sampling strategy, and we would never have detected these peaks with twice-monthly and monthly sampling frequencies.
3.3. Evolution of the horizontal distribution of cyanobacteria in the lake during the bloom As shown in the Video S1 (Supplemental Fig. 2), the horizontal distribution of both cyanobacteria displayed marked variations during the course of the study. Moreover, when the spatial distributions of the two species at the same sampling dates were compared, it could be seen that similar or contrasting patterns in the horizontal distribution of M. aeruginosa and A. flos-aquae cells would have been found, depending on the dates chosen (some examples are provided in Fig. 5). Supplementary data related to this article can be found online at doi: 10.1016/j.watres.2010.10.011 In order to obtain a better picture of this spatial variability in the cell concentrations of the two species, we estimated the coefficients of variation in the mean abundance for each sampling date and for each species from the results obtained at the six sampling points (Fig. 6). These coefficients were usually higher for A. flos-aquae than for M. aeruginosa (Wilcoxon test, p ¼ 3.25 1005), suggesting that the horizontal distribution of A. flos-aquae was more variable. Finally, there was no correlation (Spearman coefficient) between the coefficient of variation and the mean cell abundance for A. flos-aquae, and only a weak correlation was found for M. aeruginosa (Spearman coefficient, p ¼ 0.003 r ¼ 0.4; Supplemental Fig. 3). In order to find out whether wind speed/direction could account for the variations in the horizontal distribution of cyanobacterial cell abundance in the lake, we recorded in a first time, for each species and for each sampling date, the sampling point (out of the six) at which the highest cell
Fig. 6 e Change over time in the coefficients of variation of the mean cell abundances of M. aeruginosa (black triangle) and A. flos-aquae (white square) estimated at all six sampling points.
abundance was detected. We then constructed a table in which we related these findings to the wind direction and speed in the 5 h before the sampling, knowing that only data with wind speed values 2.0 m/s were taken into consideration. For M. aeruginosa, the highest cell abundances in the southernmost sampling points V2 and V3 were associated with winds blowing from the NW (Table 1), whereas those at the V1 and V4 sampling points were more surprisingly associated with winds from the SE. High cell abundances in the northern most sampling points V5 and V6 were equally associated with winds from NW and SE. For A. flos-aquae, the results were more complicated, and no obvious link could be seen between the direction of the wind and the distribution of the cyanobacteria (Table 1). The same analyses were performed by taking into account the wind data one and two days before sampling (instead 5e10 h before sampling), but no obvious relationship was detected (data not shown).
Fig. 5 e Spatial distribution of two cyanobacteria, M. aeruginosa and A. flos-aquae, in the lake at four sampling dates (July, 9, 17 and 23; August, 8).
1010
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 0 5 e1 0 1 4
Table 1 e Relationship between wind direction and high cell abundance recorded for M. aeruginosa and A. flosaquae at the different sampling points. V1 M. aeruginosa SeE 4 NeW 2 A. flos-aquae SeE 9 NeW 6
V2
V3
V4
V5
V6
1 5
1 3
8 2
7 6
2 2
2 5
4 0
0 0
5 5
2 4
3.4. Influence of the number of sampling points on the estimated cyanobacterial cell abundances in the lake The cyanobacterial cell abundances in the shallow lake were estimated by calculating the average value for the six sampling points (see Fig. 1). In order to determine the number of sampling points required to obtain a good estimation of cyanobacterial cell abundances in the lake, we compared the
estimations of cell abundance based on using samples from just one, two, three, four or five sampling points with that based on all six. To do this, we calculated the correlation coefficients (Spearman) between the estimations based on the six sampling points and those based on one to five sampling points for each species (Fig. 7). We considered all possible combinations of points, and the results are classified in the figure on the basis of increasing order of r values within each combination of groups. For both species, we found that the estimations of cell abundances based on only one or two sampling points were generally rather badly correlated with those obtained using all six sampling points. On the other hand, it appeared that good correlations (around or >0.9) were obtained when at least three sampling points were used, but also that the variations due to the choice of the sampling points were still considerable when only three sampling points were used. In order to find out which combinations of sampling points provided the best results when only two or three sampling points were used, we classified all the possible combinations
Spearman coefficients
1
0,9
Microcystis 0,8
0,7
Microcystis - 1 point: ▲ ; 2 points: ■ ; 3 points: ♦; 4 points: ○ ; 5 points: □ V5 V4 V1 V2 V6 V3 V 1V 5 V 1V 4 V 4V 5 V 3V 5 V 5V 6 V 2V 5 V 1V 6 V 1V 2 V 4V 6 V 2V 3 V 2V 6 V 3V 4 V 1V 3 V 2V 4 V 3V 6 V 1V4V5 V 1V4V6 V 1V2V6 V 1V3V4 V 1V3V5 V 2V3V4 V 3V4V5 V 3V5V6 V 4V5V6 V 1V2V4 V 1V2V5 V 2V4V5 V 2V5V6 V 1V2V3 V 1V5V6 V 2V3V5 V 1V3V6 V 2V3V6 V 2V4V6 V 3V4V6 V1V 2V3V 6 V1V 4V5V 6 V1V 2V3V 4 V1V 2V3V 5 V1V 2V4V 5 V1V 2V4V 6 V1V 2V5V 6 V1V 3V4V 5 V1V 3V4V 6 V1V 3V5V 6 V1V2V3V4V 6 V1V2V3V5V 6 V1V2V3V4V 5 V1V2V4V5V 6 V1V3V4V5V 6 V2V3V4V5V 6
0,6
Sampling points
Spearman coefficients
1
0,9
Aphanizomenon 0,8
0,7
Aphanizomenon - 1 point: ▲ ; 2 points: ■ ; 3 points: ♦; 4 points: ○ ; 5 points: □ V3 V4 V1 V5 V2 V6 V 2V 3 V 3V 4 V 1V 3 V 1V 5 V 2V 4 V 1V 4 V 3V 5 V 4V 5 V 1V 2 V 1V 6 V 4V 6 V 3V 6 V 2V 6 V 2V 5 V 5V 6 V 2V 3V4 V 3V 5V6 V 1V 3V4 V 1V 5V6 V 4V 5V6 V 1V 2V3 V 1V 2V4 V 1V 3V5 V 3V 4V5 V 3V 4V6 V 1V 3V6 V 1V 4V5 V 2V 3V6 V 2V 4V6 V 1V 2V6 V 1V 4V6 V 2V 3V5 V 2V 4V5 V 2V 5V6 V 1V 2V5 V1V 3V 5V6 V1V 2V 3V4 V1V 4V 5V6 V1V 2V 3V5 V1V 2V 3V6 V1V 2V 4V5 V1V 2V 4V6 V1V 2V 5V6 V1V 3V 4V6 V1V 3V 4V5 V 1V3V 4V 5V6 V 2V3V 4V 5V6 V 1V2V 3V 4V5 V 1V2V 3V 4V6 V 1V2V 4V 5V6 V 1V2V 3V 5V6
0,6
Sampling points
Fig. 7 e Spearman correlation values between M. aeruginosa (top) and A. flos-aquae (bottom) cell abundances estimated from the mean values for all six sampling point values, and those estimated from only one, two, three, four or five of these six sampling points.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 0 5 e1 0 1 4
1011
Fig. 8 e Location of the sampling points providing the best (left) and worst (right) estimations of cyanobacterial cell abundances (M. aeruginosa and A. flos-aquae), compared to estimations based on six sampling points. We give the combinations for two (top) and three (bottom) sampling points. The polar plot shows the direction of the maximum daily wind speed during the study. The different line types permit to distinguish the two best or the two worst combinations of sampling points, using two or three sampling points.
of points. To do this, we added the rank of each combination of sampling points obtained for the two species (M. aeruginosa and A. flos-aquae). From Fig. 8, we can see that the best estimations obtained using only two or three sampling points were provided by combinations in which the sampling points used were on the shore opposite to the prevailing wind direction over the lake.
3.5. Diel variations in the subsurface cyanobacterial biomass in the lake Finally, we carried out a 22-h estimation of the variations in the total cyanobacterial biomass in the subsurface water (20 cm depth) of the lake, at five sampling points using the BBE torch (AeE, see Fig. 1). As shown in Fig. 9, there was a steady fall in the cyanobacterial biomass at all sampling points during the
Fig. 9 e Cyanobacterial biomass in the subsurface water of the lake over a 22-h period at five sampling points (A point A, - point B, : point C, 3 point D, and > point E). The error bars indicate the standard deviation.
1012
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 0 5 e1 0 1 4
afternoon and evening, and conversely an increase late at night and in the morning. Moreover, the differences in biomass between the five sampling points were smaller during the night than during the day, as was the standard error (three measurements per sampling point). A multidimensional scaling analysis performed on the same values confirmed these observations, with all the night sampling times being grouped together, whereas the sampling times during the day were much more scattered (Data not shown).
4.
Discussion
As far as we are aware, this is the first attempt to investigate the influence of sampling strategies on the evaluation of spatial and temporal variations in cyanobacterial abundances in shallow lakes, which constitute unstable and complex ecosystems. These lakes are used by humans for numerous activities, including recreational activities and the supply of drinking water, which makes the monitoring of cyanobacteria in such ecosystems of particular importance, especially as part of the evaluation of the health risks linked to cyanobacterial blooms and their toxins. Sampling strategy is also very important in the context of basic studies, because the quality of sampling has a major impact on the quality of the final results. In this study, we found that the sampling frequency required to obtain a good estimation of the temporal evolution of the cyanobacterial abundance depends on the blooming species, M. aeruginosa or A. flos-aquae. Twice-monthly or monthly sampling provided good results for M. aeruginosa, whereas this was not often enough to monitor the chaotic population dynamics of A. flos-aquae. These findings are in contradiction with the recommendations of Codd et al. (1999), who proposed weekly or a twice-monthly sampling for species that do not form scum (A. flos-aquae for example), and more frequent sampling for scum-forming species (such as M. aeruginosa), because they can display more rapid changes in concentration. On the other hand, in agreement with these authors, our findings also demonstrate that a reactive approach to cyanobacterial sampling is called for, and that appropriate monitoring programs must be devised for each ecosystem based on what is known about how these systems function. It is clear that sampling only once or twice a month can lead to a very considerable under-estimation of cyanobacterial concentrations, and thus of the health risks associated with the bloom. As a result, a weekly sampling frequency seems to be required for cyanobacteria in small freshwater ecosystems. Our data on the variability of the spatial distribution of cyanobacteria in the lake indicate that at least three sampling points were needed to obtain a good estimation of the abundance, based on a comparison with estimations based on six sampling points. It appeared also that if only three sampling points are used, the choice of the location of these sampling points is very important for the quality of the estimation. The most reliable results were obtained using sampling points located on the opposite side of the lake shore to the main axis of the wind direction, and that adding more sampling points reduces the impact of the choice of the location of the sampling points. Such horizontal variability in the
distribution of cyanobacteria has been previously documented for many ecosystems, and also for many cyanobacterial species. For example, in a recent study, Briand et al. (2009) showed that the spatial distribution of M. aeruginosa in a large freshwater reservoir on a given date could vary from 7.103 cells/mL to 2.108 cells/mL, depending on the location of the sampling points in the reservoir. Many factors and processes can influence the horizontal distribution of cyanobacteria in a freshwater ecosystem. Among them, wind and surface currents seem to have the greatest impact. For example, the distribution of Microcystis spp. in lake Taihu (see the review paper of Qin et al., 2010) and in Lake Ontario (Hotto et al., 2007) is clearly influenced by both winds and currents. Similarly, Moreno-Ostos et al. (2009) have shown that in a Spanish reservoir currents have a marked effect on the distribution of cyanobacteria, and more globally on the phytoplankton community. In this study, we found that the horizontal distribution of M. aeruginosa in the lake was influenced more by wind direction than that of A. flos-aquae. This could be explained by the fact that M. aeruginosa colonies are located at the surface of the lake at the end of the night, and thus are more subjected to the influence of the wind than A. flos-aquae filaments, which are distributed over the entire water column. We found also that two sampling points in the lake (V5 and V6) were less influenced by wind direction than the others. This could be explained by the fact that these two sampling points are protected from the influence of winds blowing from the NW by an embankment located in the North part of the lake. Finally, we also demonstrated that in such a small lake, the impact of wind occurred at the scale of a few hours, in contrast to the previous findings of Welker et al. (2003) showing that the distribution of cyanobacteria was influenced by winds that had been blowing one or two days earlier. In addition to this variability in their horizontal distribution; the vertical distribution of cyanobacteria was also variable. Indeed, during the 22 h for which we used the BBE Torch to monitor the concentrations of cyanobacteria, we found that they were lower in the subsurface layer early at night than during the day. The greatest variations in biomass were recorded during the daytime, both at the scale of one sampling point when the three measurements were compared, and at the scale of the five sampling points monitored during this study. These findings also suggest that several sampling points are necessary to obtain an accurate assessment of the cyanobacterial biomass and that integrated sampling of the first meter of the water column reduces the variability in the estimation of the biomass due to the position of cyanobacteria in the water column. This finding is consistent with data reported by Ahn et al. (2008) showing that an integrated method was the most appropriate sampling method for Oscillatoria and Microcystis blooms. The causes of these variations in the position of cyanobacteria in the water column have been studied for different species. Several papers (Porat et al., 2001; Rabouille and Salenc¸on, 2005; Rabouille et al., 2005; Visser et al., 2005; Walsby, 1994) have shown that migrations of cyanobacteria in the water column are probably due to the dynamics of the carbon-reserve metabolism, and are strongly influenced by light, temperature, and water mixing.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 0 5 e1 0 1 4
From all these findings, guidelines should be proposed for the monitoring of cyanobacteria in shallow lakes. Codd et al. (1999) propose that the choice of sampling frequency and the choice of the number and location of the sampling sites should depend on the purpose of monitoring. For example, sampling near public bathing sites was recommended in freshwater ecosystems used for recreational activities. However, this strategy might generate data relevant only to the immediate vicinity of the bathing area, which do not reflect the global distribution of cyanobacteria in the lake. This is especially true when this distribution is very varied, and could make it difficult to prevent or manage blooms. On the basis of our findings, we proposed a different sampling strategy, which does not depend on the purpose of the monitoring. In order to minimize the cost of the cyanobacteria survey, twice-monthly sampling could be the norm for monitoring, but only if it is complemented by regular visual surveys. Changes in the appearance of the water (e.g. its color) between two successive dates would lead to an immediate increase in the sampling frequency. If it is not possible to carry out this visual survey, only a weekly sampling strategy can ensure that a sporadic cyanobacterial bloom is not missed. With regard to the number of sampling points, we found that at least three sampling points were necessary to obtain an accurate assessment of the cyanobacterial biomass (based on comparison with six sampling points). However, even when three sampling points were used, we found that the choice of the location of the sampling points was also very important (Fig. 8), even though the lake was fairly rectangular in shape and its perimeter small (around 1.3 km). These findings suggest that for large lakes and also for lakes with a more complex shape, a large number of sampling points would be necessary to obtain a good estimation of the cyanobacterial abundance. Clearly such sampling is time consuming and expensive. One way to reduce these costs would be to collect a large number of samples and then pool equal volumes of these samples in the same flask, before carrying out a single analysis. In this study, as in most of the monitoring programs performed in small lakes, all samples were taken from the shoreline of the lake. This kind of sampling is suitable for small lakes, but it has been shown that for large lakes (Rogalus and Watzin, 2008) shoreline sampling may miss early warning signs of bloom development, and also lead to the overestimation of the concentration of microcystins, when compared to data obtained from offshore samples. For bigger lakes, therefore, the sampling strategy must include offshore samples. Different programs worldwide are testing alternatives to water sampling for the monitoring of cyanobacteria in freshwater ecosystems. Two main approaches have been investigated. The first one is based on the use of remote sensing, which has long been in use in marine ecosystems (see for example Bracher et al., 2009). In freshwater ecosystems, the paper of Hunter et al. (2008) has shown the potential of high resolution images for the assessment of the spatial distribution of M. aeruginosa in a shallow eutrophic lake. However, the cost of these images and the impact of meteorological conditions are limiting factors for envisaging the use of this tool in routine cyanobacteria monitoring programs. One alternative, lower-cost solution could be based, in the future, on the use of
1013
drones to take aerial photographs of freshwater ecosystems, but these tools are still in development. Moreover, they will be only useful for cyanobacterial species that live in the surface water of lakes. The second way of monitoring of cyanobacteria without sampling the water being investigated is the use of buoys equipped with a variety of sensors, including, for example, a submersible spectrofluorometer to quantify the biomass of the cyanobacteria. This kind of tool permits the real-time monitoring of phytoplankton, including cyanobacteria, as shown for example in the paper of Le Vu et al. (in press). The two obstacles to their use in routine cyanobacteria monitoring programs are the high price of these systems, and the fact that they only provide estimations for one sampling point. Despite this, the possible use of such buoys, combined with the spatial monitoring of cyanobacteria by water sampling looks very promising for surveying cyanobacteria in freshwater ecosystems.
5.
Conclusion
The sampling of cyanobacteria in freshwater ecosystems is a hot topic, in particular in the context of programs for surveying these toxic microorganisms in ecosystems used for the production of drinking water or for recreational activities. Paradoxically, fewer studies deal with the impact of sampling strategies on the estimation of cyanobacterial cell abundances in freshwater ecosystems. In this study, we demonstrate that the choice of sampling strategy can lead to very different estimations of the cell abundances of two blooming species in a shallow lake and also that, depending on the cyanobacterial species involved, different sampling strategies are required to obtain a good estimation of their population dynamics. All these findings suggested that monthly or twice-monthly sampling strategies at just one sampling point do not allow to provide an accurate estimation of cyanobacterial abundances, and thus of the health risks associated with the presence of toxic species in aquatic ecosystems. Moreover, although promising new technologies are being developed for monitoring freshwater cyanobacteria, their cost and some other drawbacks mean that at present they cannot replace water sampling, which will remain the basis of most of these monitoring programs for the foreseeable future.
Acknowledgment This work was funded by the Re´gion Rhoˆne-Alpes and the Conseil Ge´ne´ral de la Loire. Monika Ghosh is acknowledged for improving the English version of the manuscript. The comments and suggestions of the two anonymous reviewers were greatly appreciated.
Appendix Supplementary data Supplementary data related to this article can be found online at doi:10.1016/j.watres.2010.10.011.
1014
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 0 5 e1 0 1 4
references
Ahn, C.Y., Joung, S.H., Park, C.S., Kim, H.S., Yoon, B.D., Oh, H.M., 2008. Comparison of sampling and analytical methods for monitoring of cyanobacteria-dominated surface waters. Hydrobiologia 596, 413e421. Beutler, M., Wiltshire, K.H., Meyer, B., Moldaenke, C., Luring, C., Meyerhofer, M., Hansen, U.P., Dau, H., 2002. A fluorometric method for the differentiation of algal populations in vivo and in situ. Photosynthesis Research 72, 39e53. Bracher, A., Vountas, M., Dinter, T., Burrows, J.P., Rottgers, R., Peeken, I., 2009. Quantitative observation of cyanobacteria and diatoms from space using PhytoDOAS on SCIAMACHY data. Biogeosciences 6, 751e764. Briand, E., Escoffier, N., Straub, C., Sabart, M., Quiblier, C., Humbert, J.-F., 2009. Spatiotemporal changes in the genetic diversity of a bloom-forming Microcystis aeruginosa (cyanobacteria) population. The ISME Journal 3, 419e429. Brient, L., Lengronne, M., Bertrand, E., Rolland, D., Sipel, A., Steinmann, D., Baudin, I., Legeas, M., Le Rouzic, B., Bormans, M., 2008. A phycocyanin probe as a tool for monitoring cyanobacteria in freshwater bodies. Journal of Environmental Monitoring 10, 248e255. Codd, G.A., Chorus, I., Burch, M., 1999. Design of monitoring programmes. In: WHO (Ed.), Toxic Cyanobacteria in Water: A Guide to Their Public Health Consequences, Monitoring and Management. E&F Spon ed, London & New York, p. 302e316. Codd, G.A., Lindsay, J., Young, F.M., Morrison, L.F., Metcalf, J.S., 2005. Harmful cyanobacteria. In: Huisman, J., Matthijs, H.C.P., Visser, P.M. (Eds.), Harmful Cyanobacteria. Springer, Dordrecht, pp. 1e23. Hotto, A.M., Satchwell, M.F., Boyer, G.L., 2007. Molecular characterization of potential microcytsin-producing cyanobacteria in lake Ontario embayments and nearshore waters. Applied and Environmental Microbiology 73, 4570e4578. Hunter, P.D., Tyler, A.N., Gilvear, D.J., Willby, N.J., 2009. Using remote sensing to aid the assessment of human health risks from blooms of potentially toxic cyanobacteria. Environmental Science & Technology 43, 2627e2633. Hunter, P.D., Tyler, A.N., Willby, N.J., Gilvear, D.J., 2008. The spatial dynamics of vertical migration by Microcystis aeruginosa in a eutrophic shallow lake: a case study using high spatial resolution time-series airborne remote sensing. Limnology and Oceanography 53, 2391e2406. Kuiper-Goodman, T., Falconer, I., Fitzgerald, J., 1999. Human health aspects. In: Chorus, I., Bartram, J. (Eds.), Toxic Cyanobacteria in Water: A Guide to Their Public Health Consequences, Monitoring and Management. WHO, pp. 125e160. Le Vu, B., Vinc¸on-Leite, B., Lemaire, B., Bensoussan, N., Calzas, M., Drezen, C., Deroubaix, J., Escoffier, N., De´gre´s, Y., Freissinet, C., Groleau, A., Humbert, J.-F., Paolini, G., Pre´vot, F., Quiblier, C., Rioust, E., Tassin, B. High-frequency monitoring of phytoplankton dynamics within the European water framework directive: application to metalimnetic cyanobacteria. Biogeochemistry, in press, doi:10.1007/s10533010-9446-1.
Leboulanger, C., Dorigo, U., Jacquet, S., Le Berre, B., Paolini, G., Humbert, J.-F., 2002. Application of a submersible spectrofluorometer for rapid monitoring of freshwater cyanobacterial blooms: a case study. Aquatic Microbial Ecology 30, 83e89. Markensten, H., Moore, K., Persson, I., 2010. Simulated lake phytoplankton composition shifts toward cyanobacteria dominance in a future warmer climate. Ecological Applications 20, 752e767. Moreno-Ostos, E., Cruz-Pizarro, L., Basanta, A., George, D.G., 2009. Spatial heterogeneity of cyanobacteria and diatoms in a thermally stratified canyon-shaped reservoir. International. Review of Hydrobiology 94, 245e257. OCDE, 1982. Eutrophisation des eaux: me´thodes de surveillance, d’e´valuation et de lutte. OCDE, 164 pp. Paerl, H.W., Huisman, J., 2009. Climate change: a catalyst for global expansion of harmful cyanobacterial blooms. Environmental Microbiology Reports 1, 27e37. Porat, R., Teltsch, B., Perelman, A., Dubinsky, Z., 2001. Diel buoyancy changes by the cyanobacterium Aphanizomenon ovalisporum from a shallow reservoir. Journal of Plankton Research 23, 753e763. Qin, B., Zhu, G., Gao, G., Zhang, Y., Li, W., Paerl, H., Carmichael, W., 2010. A drinking water crisis in Lake Taihu, China: linkage to climatic variability and lake management. Environmental Management 45, 105e112. R Development Core Team, 2010. R: A Language and Environment for Statistical Computing. R Foundation for Statistical Computing, Vienna, Austria, ISBN 3-900051-07-0. http://www. R-project.com. Rabouille, S., Salenc¸on, M.J., 2005. Functional analysis of Microcystis vertical migration: a dynamic model as a prospecting tool. II. Influence of mixing, thermal stratification and colony diameter on biomass production. Aquatic Microbial Ecology 39, 281e292. Rabouille, S., Salenc¸on, M.J., Thebault, J.M., 2005. Functional analysis of Microcystis vertical migration: a dynamic model as a prospecting tool I - Processes analysis. Ecological Modelling 188, 386e403. Rogalus, M.K., Watzin, M.C., 2008. Evaluation of sampling and screening techniques for tiered monitoring of toxic cyanobacteria in lakes. Harmful Algae 7, 504e514. Sabart, M., Pobel, D., Latour, D., Robin, J., Salenc¸on, M.J., Humbert, J.-F., 2009. Spatiotemporal changes in the genetic diversity in French bloom-forming populations of the toxic cyanobacteria Microcystis aeruginosa. Environmental Microbiology Reports 1, 263e272. Visser, P.M., Ibelings, B.W., Mur, L.R., Walsby, A.E., 2005. The ecophysiology of the harmful cyanobacterium Microcystis features explaining its success and measures for its control. In: Huisman, J., Matthijs, H.C.P., Visser, P.M. (Eds.), Harmful Cyanobacteria. Springer, Dordrecht, pp. 109e142. Walsby, A.E., 1994. Gas vesicles. Microbiological Reviews 51, 94e144. Welker, M., Do¨hren von, H., Ta¨uscher, H., Steinberg, C.E.W., Erhard, M., 2003. Toxic Microcystis in shallow lakes Mu¨ggelsee (Germany) - dynamics, distribution, diversity. Archiv fu¨r Hydrobiologie 157, 227e248.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 1 5 e1 0 2 4
Available at www.sciencedirect.com
journal homepage: www.elsevier.com/locate/watres
Ozonation and activated carbon treatment of sewage effluents: Removal of endocrine activity and cytotoxicity Daniel Stalter*, Axel Magdeburg, Martin Wagner, Jo¨rg Oehlmann Goethe University Frankfurt am Main, Biological Sciences Division, Department Aquatic Ecotoxicology, Siesmayerstrasse 70, 60323 Frankfurt, Germany
article info
abstract
Article history:
Concerns about endocrine disrupting compounds in sewage treatment plant (STP) effluents
Received 14 July 2010
give rise to the implementation of advanced treatment steps for the elimination of trace
Received in revised form
organic contaminants. The present study investigated the effects of ozonation (O3) and
4 October 2010
activated carbon treatment (AC) on endocrine activities [estrogenicity, anti-estrogenicity,
Accepted 10 October 2010
androgenicity, anti-androgenicity, aryl-hydrocarbon receptor (AhR) agonistic activity] with
Available online 16 October 2010
yeast-based bioassays. To evaluate the removal of non-specific toxicity, a cytotoxicity assay using a rat cell line was applied. Wastewater (WW) was sampled at two STPs after conventional activated sludge treatment following the secondary clarifier (SC) and after
Keywords: Micropollutants
subsequent advanced treatments: O3, O3 þ sand filtration (O3-SF), and AC. Conventional
Anti-androgens
treatment reduced estrogenicity, androgenicity, and AhR agonistic activity by 78e99%
Anti-estrogens
compared to the untreated influent WW. Anti-androgenicity and anti-estrogenicity were not detectable in the influent but appeared in SC, possibly due to the more effective
Dioxin-like xenobiotics Aryl-hydrocarbon
receptor
(AhR)
removal of respective agonists during conventional treatment. Endocrine activities after SC
activity
ranged from 2.0 to 2.8 ng/L estradiol equivalents (estrogenicity), from 4 to 22 mg/L
Yeast estrogen screen (YES)
4-hydroxytamoxifen equivalents (anti-estrogenicity), from 1.9 to 2.0 ng/L testosterone
Yeast androgen screen (YAS)
equivalents (androgenicity), from 302 to 614 mg/L flutamide equivalents (anti-androge-
GH3 cells
nicity), and from 387 to 741 ng/L b-naphthoflavone equivalents (AhR agonistic activity). In
Polyaromatic hydrocarbons (PAHs)
particular, estrogenicity and anti-androgenicity occurred in environmentally relevant
Wastewater treatment plant
concentrations. O3 and AC further reduced endocrine activities effectively (estrogenicity: 77e99%, anti-androgenicity: 63e96%, AhR agonistic activity: 79e82%). The cytotoxicity assay exhibited a 32% removal of non-specific toxicity after O3 compared to SC. O3 and sand filtration reduced cytotoxic effects by 49%, indicating that sand filtration contributes to the removal of toxicants. AC was the most effective technology for cytotoxicity removal (61%). Sample evaporation reduced cytotoxic effects by 52 (AC) to 73% (O3), demonstrating that volatile substances contribute considerably to toxic effects, particularly after O3. These results confirm an effective removal or transformation of toxicants with receptor-mediated mode of action and non-specific toxicants during O3 and AC. However, due to the limited extractability, polar ozonation by-products were neglected for toxicity analysis, and hence non-specific toxicity after O3 is underestimated. ª 2010 Elsevier Ltd. All rights reserved.
* Corresponding author. Tel.: þ49 6979824882; fax: þ49 6979824748. E-mail address:
[email protected] (D. Stalter). 0043-1354/$ e see front matter ª 2010 Elsevier Ltd. All rights reserved. doi:10.1016/j.watres.2010.10.008
1016
1.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 1 5 e1 0 2 4
Introduction
The conventional activated sludge treatment of wastewater (WW) removes endocrine disrupting compounds (EDCs) very effectively (Liu et al., 2009). Nevertheless, sewage effluents considerably contribute to surface water contamination with (xeno-) hormones on trace levels and thus to widespread endocrine disruption in aquatic wildlife (Jobling and Tyler, 2006). Feminization of fish and molluscs results in population relevant effects on reproduction or development (Jobling and Tyler, 2006). Besides estrogenicity, anti-androgenicity has recently attracted augmented attention regarding its impact on aquatic ecosystems as it contributes to the feminization of fish and molluscs (Santos et al., 2008; Jobling et al., 2009). The study by Jobling et al. (2009) suggests that reproductive health effects in fish (e.g., intersexuality and vitellogenin induction) are mediated primarily by anti-androgenic combined with estrogenic mechanisms rather than by estrogenic mechanisms alone. Besides anti-androgens, anti-estrogens are known to potentially influence endocrine disrupting effects. Benzotriazole, for example, is only partly removed in sewage treatment plants (STPs) and hence might affect in vitro experiments (Harris et al., 2007). As androgenic and anti-androgenic compounds are known to influence each other’s interaction with the androgen receptor, the analysis of agonists and antagonists is important to evaluate the in vitro endocrine disrupting potential of a complex chemical mixture (Weiss et al., 2009). Advanced WW treatment technologies, like ozonation (O3) and activated carbon filtration (AC), provide effective barriers to a wide range of organic pollutants (Nowotny et al., 2007; Hollender et al., 2009; Schaar et al., 2010) and can thus reduce the emission of EDCs via STP effluents. While estrogenicity removal by advanced treatment methods has already been investigated (Huber et al., 2004; Escher et al., 2009; Stalter et al., 2010b), the impact on androgenicity, antiandrogenicity, and anti-estrogenicity remains unclear. Therefore, the present study examined the effect of O3 and AC on estrogenicity, androgenicity, and the respective antagonistic activities. Additionally, the aryl-hydrocarbon receptor (AhR) agonistic activity was analysed. AhR regulates genes involved in xenobiotic metabolism (Miller, 1999). Thus, the measurement of AhR agonists is a suitable tool to detect hazardous substances like halogenated aromatic hydrocarbons (e.g., dibenzodioxins, dibenzofurans, and biphenyls) and polyaromatic hydrocarbons (PAHs; Alnafisi et al., 2007). A vertebrate cell-based test system is applied to test for non-specific toxicity because ozonation results in potentially hazardous oxidation products (Petala et al., 2006; Benner and Ternes, 2009; Stalter et al., 2010a,b). This work is part of a comprehensive study within the Neptune project (www.neptune-eu.org), covering in vivo tests with six different test organisms (Stalter et al., 2010a,b) and a variety of in vitro bioassays.
2.
Material and methods
2.1.
Characterization of the STPs
WW samples of a treatment plant in Regensdorf (Switzerland; STP A) and a pilot treatment plant in Neuss (Germany; STP B)
were investigated. Both STPs operated experimentally with a full scale (STP A) or half scale ozonation (STP B) after the secondary clarifier (SC) subsequent to conventional activated sludge treatment and with a sand filtration step after the ozone reactor. Applied ozone doses were 0.8 (STP A) and 0.7 g O3/g DOC (dissolved organic carbon). At STP B, powdered activated carbon treatment (AC; 20 mg/L, contact time 60 min) was tested in parallel with a subsequent sand filtration step. The applied ozone and AC doses at both treatment plants were chosen because they eliminate pollutants effectively and are regarded as economically feasible (Nowotny et al., 2007; Joss et al., 2008). More detailed information is provided in the supplementary information (SI), including WW quality parameters after SC (Table S1).
2.2.
Collection and extraction of the WW samples
At STP A, six grab samples were collected from each sampling point after SC, after the ozone reactor (O3), and after the following sand filtration (O3-SF; sampling period: 08/2008e09/ 2008). At STP B, nine 24 h composite samples were collected from each sampling point after SC, O3, O3-SF, and after the parallel AC treatment subsequent to sand filtration (ACSF; sampling period: 09/2008e03/2009). WW from the treatment plant influent (INF) was sampled (n ¼ 3) at both STPs to allow an estimation of the removal effectiveness during conventional treatment. At STP B, WW was additionally sampled after treatment with different ozone doses ranging from 0.4 to 1.6 g O3/g DOC. All WW samples were processed by solid phase extraction (SPE). The detailed extraction method is described in SI 3 and the sampling points are displayed in Figure S1.
2.3.
Recombinant yeast screens
All yeast screens in this study base upon the same principle. The yeast cells contain a gene for the human estrogen receptor, the human androgen receptor or the aryl-hydrocarbon receptor, respectively, each fused to the reporter gene lacZ. The binding of agonistic ligands leads to a colour change in the assay medium, which is photometrically measurable and provides a marker for the agonistic activity. The detection of antagonistic activity requires a background concentration of the agonistic reference substance, and hence antagonistic activity in the sample leads to a reduced colour change. 96-well microtiter plates were loaded with 30 mL 80-fold concentrated methanol extracts (prepared as described in SI 3), providing a 20-fold sample concentration per well (for INF: 7.5 mL/well, providing a 5-fold concentration). These concentrations were chosen to avoid cytotoxic effects. WW extracts were evaporated to dryness and re-dissolved in the respective assay medium. Assay procedure and data analysis were conducted as described previously (Routledge and Sumpter, 1996) with modifications according to Wagner and Oehlmann (2009). The yeast-based test on aryl-hydrocarbon receptor (AhR) agonists (yeast dioxin screen, YDS) was performed in analogy to the yeast estrogen screen with a slightly modified medium according to Miller (1999). For the YDS, 1000-fold concentrated dimethyl sulfoxide (DMSO) extracts (prepared as described in SI 3) were used because Gustavsson et al. (2004) reported
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 1 5 e1 0 2 4
a significant fraction of volatile AhR agonists in STP sludge. As evaporation in the wells might lead to a loss of agonistic substances, DMSO extracts were directly added to the assay medium in volumes providing a 1e5-fold final sample concentration. Sample concentration was adapted to avoid cytotoxic effects. Total solvent portion was adjusted to 0.5% in each treatment group. In all in vitro screens, microtiter plates were sealed with gas permeable membranes (Breath-Easy, Diversified Biotech, Boston, USA) during incubation to reduce the risk of cross-contamination via volatile substances. The AhR agonist b-naphthoflavone (b-NF) was used as reference instead of 2,3,7,8-tetrachlorodibenzodioxin (TCDD). Because of its high hydrophobicity, the bioavailability of TCDD is reduced considerably when the test is conducted in plates consisting of plastic compared to glass material (Miller, 1999), and hence resulting sample activity might be overestimated. Thus, the results by Miller (1999) suggest that b-NF is a more appropriate reference substance than TCDD for the respective test system. In this study, reference equivalents (R-EQs) are interpolated nonlinearly from the appropriate doseeresponse relationship of the reference agonist or antagonist under presence of a fixed concentration of the corresponding agonist according to Wagner and Oehlmann (2009). Estradiol equivalents (E-EQs) were calculated as R-EQs for estrogenic activity, 4-hydroxytamoxifen equivalents (OHT-EQs) for anti-estrogenicity, testosterone equivalents (T-EQs) for androgenicity, flutamide equivalents (F-EQs) for anti-androgenicity, and b-NF equivalents (b-NF-EQ) for AhR agonistic activity. The applied concentrations for the reference dilution series, the background agonist concentration for the anti-screens as well as the corresponding EC50 for each test system is provided in Table S2. The doseeresponse curves of the reference dilution series are displayed in Figure S2. Each sample was analysed in eight pseudo replicates for every test system. Box and whisker plots display the range of mean activities of all samples per sampling point. If a clear removal pattern was observed, Tables S3eS8 state the mean values, standard errors, and percentage removals compared to SC for the samples from each sampling campaign.
2.4.
Cytotoxicity assay
Cytotoxic effects were analysed using the rat pituitary cell line GH3 to assess the non-specific toxicity of WW samples. This cell line was chosen because of its enhanced sensitivity compared to a rainbow trout liver cell line (RTL-W1; Lee et al., 1993) that was employed in parallel (data not shown). Six samples from the serial treatment steps at STP B were extracted at pH 2 and pH 7 and tested as DMSO extracts and methanol extracts each (SI 3). 0.5% DMSO extract was added to the cell suspension for a final 5-fold concentration. Methanol extracts were evaporated to dryness in the microtiter wells in volumes providing a 10-fold final concentration. Different dosings were chosen as 5-fold concentrated methanol extracts did not induce significant toxic effects after conventional treatment and 10-fold concentrated DMSO extracts led to maximum toxicity in all treatment groups. No dilution series were applied due to the limited sample extract volumes. Cell culturing and preparation of the cell suspension is described in SI 5.1.
1017
100 mL of the suspension was added to the wells of 96-well tissue culture test plates (Orange Scientific, Braine-l’Alleud, Belgium). Microtiter plates were sealed using Breath-Easy membranes and incubated for 120 h (37 C, 5% CO2). Each sample was analysed in eight pseudo replicates. After incubation, the cell activity was determined according to Palomino et al. (2002) with slight modifications. Resazurin sodium salt powder (VWR International GmbH, Darmstadt, Germany) was dissolved at 0.01% (w/v) in phosphate buffer saline and filter sterilized (0.2 mm). 30 mL resazurin solution was added to each well, incubated for 5.5 h and photometrically measured at 540 and 595 nm. The percentage resazurin reduction (calculated as described in SI 5.2) served as measurement for cell viability. Correlation between cell density and resazurin reduction is documented in Figure S3 (r2 ¼ 0.99). Cytotoxicity (percentage inhibition of cell density) was calculated according to SI 5.3. The blank (wells with culture medium, 0.5% DMSO, without cells) was defined as 100% cytotoxicity and negative control (wells with cell suspension, 0.5% DMSO) as 0%. 2,4-dichlorophenol in concentrations from 1.5 to 24 mg/L served as reference toxicant (doseeresponse curve in Figure S4).
2.5.
Statistical analysis
Statistical analyses were performed using GraphPad Prism version 5.03 for Windows (GraphPad Software, San Diego, California, USA). To test for significant differences, data were Ln-transformed and one-way ANOVA was applied with Dunnett’s post test. Percentage data were transformed by arcsin before ANOVA. In cases of unequal variances (Bartlett’s test, p < 0.05), KruskaleWallis with Dunn’s post test was used instead.
3.
Results and discussion
3.1.
Estrogenicity
Compared to the influent (13e23 ng/L E-EQ), the estrogenic activity was reduced by 78% (STP A) to 91% (STP B; Fig. 1A, B) during conventional treatment, confirming literature data, which report percentage removals between 70 and 99% (Liu et al., 2009). Despite the effective elimination of estrogenicity, remaining (xeno-) estrogens in sewage effluents potentially are of environmental relevance (Jobling et al., 2002). At both STPs, the average estrogenic activity after SC ranged from 2.0 to 2.8 ng/L E-EQ. Ozonation further diminished this activity with a percentage removal following O3-SF of 88e95% compared to SC (Fig. 1A, B). ACSF was less effective (77% average removal, Fig. 1B) than O3-SF at the applied AC dose of 20 mg/L. The remaining average estrogenic activity of all sampling campaigns after advanced treatment was 0.1e0.2 ng/L E-EQ after O3-SF and 0.4 ng/L after ACSF (Table S3, S4). Hence, final activity was below the environmental quality standard proposed for estradiol (0.5 ng/L; Moltmann et al., 2007). Therefore, estrogenicity reduction could be a relevant environmental benefit, helping to reduce the feminization of fish populations (Jobling et al., 2002) as reported by Filby et al. (2010). At STP A, the reduced estrogenic activity led to reduced vitellogenin levels in juvenile rainbow trout (Stalter et al.,
1018
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 1 5 e1 0 2 4
Fig. 1 e Estrogenic (estradiol equivalents, E-EQs; A, B) and anti-estrogenic activities (4-hydroxytamoxifen equivalents, OHTEQs; C, D) during six (STP A) or nine sampling campaigns (STP B, INF: n [ 3) as determined in recombinant yeast screens. Displayed are the mean activities of eight pseudo replicates for each sample. Average endocrine activity removal is stated as % compared to INF (DINF) or SC (DSC). INF, influent; SC, after the secondary clarifier; O3, SC after ozonation; O3-SF, O3 after sand filtration; ACSF, SC after activated carbon treatment.
2010b). The removal of estrogenicity by ozonation was already investigated in previous studies (Huber et al., 2004; Escher et al., 2009; Stalter et al., 2010b) and is a result of the oxidative transformation of estrogenically active chemicals (Huber et al., 2004). Phenols are an important functional group, interacting with the estrogen receptor (Nishihara et al., 2000) and are known to be particularly susceptible to ozone attack (von Gunten, 2003). Consequently, estrogenicity removal via ozonation is to be expected. The less pronounced removal efficiency of AC treatment compared to O3 might be a result of the elevated DOC level at STP B (up to 12 mg/L, Table S1), because adsorbability of pollutants is significantly lower at higher background DOC concentrations (Nowotny et al., 2007). Finally, further in vitro studies with a steroidgenesis assay could be appropriate to evaluate potential effects on the cellular production of estradiol before and after advanced treatments to complement the present findings (Grund et al., 2010).
3.2.
Anti-estrogenicity
The anti-estrogenic activity exhibited no clear removal pattern. At STP A, OHT-EQs were elevated after ozonation and decreased to the level of SC after sand filtration (Fig. 1C).
However, these results are based on only 3 samples, due to limited sample extract volumes. At STP B, anti-estrogenicity was slightly increased after O3 and O3-SF, while in INF no antiestrogenic activity was detectable (Fig. 1D). Possibly the occurrence of anti-estrogenic compounds in INF was masked by the high estrogenicity at both STPs (Fig. 1A, B). A nonspecific quenching by influent extracts is not likely to explain the absence of antagonistic activity because the test system for the agonists works well at the same sample concentration. However, fractionation studies are required for separating agonists from antagonists to confirm masking effects, which were already observed by Weiss et al. (2009). During ozonation, the estrogenic compounds were probably more effectively removed than anti-estrogens, resulting in a slightly elevated anti-estrogenicity in O3 and O3-SF. The further increase after activated carbon treatment cannot be explained conclusively, except by a higher adsorption of estrogens compared to anti-estrogenic compounds. Nonetheless, the increased anti-estrogenicity after advanced treatments do not necessarily implicate that these methods are not applicable for pollution reduction as the reduced estrogenicity might be of higher benefit for aquatic wildlife. However, further research on potential negative effects of anti-estrogens on aquatic organisms is desirable.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 1 5 e1 0 2 4
3.3.
Androgenicity
Androgenic activity from the influent (201e400 ng/L T-EQs) was reduced by more than 99% during conventional activated sludge treatment (Fig. 2A, B). At STP A, average activity after SC reached 2.0 ng/L T-EQs. After O3 and O3-SF, average activities were noticeably but not significantly elevated to 5.2 and 7.0 ng/L (Fig. 2A). At STP B, androgenicity was on an average level of 1.9 ng/L after SC, without a consistent removal during advanced treatment steps (Fig. 2B). Potential interactions between androgens and anti-androgens might explain the lack of androgenicity removal during advanced treatment steps and are discussed in the following section.
3.4.
Anti-androgenicity
Anti-androgenic activity was not detectable in the influent WW (Fig. 2C, D). After conventional treatment, the average activity ranged from 302 (STP B) to 614 mg/L F-EQs (STP A). Following O3-SF, the average removal reached 78% (STP B) to 90% (STP A, Fig. 2C, D), while ACSF was slightly less effective (63% removal, Fig. 2D). Besides estrogenic activity, antiandrogenicity is an important causative factor for the feminization of wild fish (Jobling et al., 2009). Anti-androgenic activity predicted to be present in UK rivers ranged from 0 to
1019
100 mg/L F-EQs (Jobling et al., 2009). Considering a potential WW dilution in the receiving water body of 1:10, the values in the present study (Table S5, S6) conform to literature data (Jobling et al., 2009). Moreover, anti-androgenic activity measured in the conventionally treated WW samples might be sufficient to induce biological responses in fish. Katsiadaki et al. (2006) determined a lowest observed effect concentration (LOEC) of 10 mg/L flutamide (concentration, where the production of a glue protein in the kidney of sticklebacks was depleted significantly) for in vivo anti-androgenic activity. Even if a dilution factor of 10 is assumed in the receiving water body, each sample after SC exceeded this effect concentration (Table S5, S6). Finally, the studies of Jobling et al. (2009) and Katsiadaki et al. (2006) provide clear indications that antiandrogenic compounds have a significant impact on aquatic organisms while this study demonstrates that anti-androgens are introduced to rivers via STP effluents in environmentally relevant concentrations. After O3 and O3-SF, activity was below 100 mg/L F-EQ in most cases, what could be a relevant benefit for aquatic wildlife. Nonetheless, if the dilution factor is below 10 in the receiving water body, remaining activity may exceed the LOEC for flutamide and hence may still be of environmental relevance. Several potential causative substances for anti-androgenicity in the environment have been identified, for example,
Fig. 2 e Androgenic (testosterone equivalents, T-EQs; A, B) and anti-androgenic activities (flutamide equivalents, F-EQs; C, D) during six (STP A) or nine sampling campaigns (STP B, INF: n [ 3) as determined in recombinant yeast screens. Displayed are the mean activities of eight pseudo replicates for each sample. Average endocrine activity removal is stated as % compared to INF (DINF) or SC (DSC). INF, influent; SC, after the secondary clarifier; O3, SC after ozonation; O3-SF, O3 after sand filtration; ACSF, SC after activated carbon treatment.
1020
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 1 5 e1 0 2 4
several PAHs, butyl-benzyl-phthalate, dibutyl-phthalate, triclosan, and dichlorophene (Thomas et al., 2009; Hill et al., 2010). However, the explicit identity of compounds causing the observed anti-androgenicity in municipal WW remains unclear. The identification of anti-androgens and their contribution to the overall activity is however required to develop source control strategies. Additionally, with regard to the high hydrophobicity of the suspected compounds (Zhang and Huang, 2003; Clara et al., 2010), it could be assumed that anti-androgens primarily enter the environment bound to particulate matter (Clara et al., 2010). The analysed water samples were membrane filtrated (1.2 mm pore size) before solid phase extraction, and hence the determined activities might be underestimated. The lack of anti-androgenicity in INF is possibly a result of masking effects due to the high androgenic activity. Environmental samples contain a complex mixture of chemicals and EDCs. When endocrine activity is analysed, only the gross activity resulting from the present receptor agonists and antagonists can be measured. Accordingly, antagonistic activity could easily be masked by its agonists in the influent (Figs. 1 and 2), and androgenic activity could even increase with advanced treatment processes in the case of a more effective antagonist removal (Fig. 2A). Comparable masking effects of androgens and anti-androgens in sediment samples were already reported by Weiss et al. (2009). Consequently, the appearance of anti-androgenic activity in SC is possibly a consequence of the effective androgen removal by >99% during conventional treatment (Fig. 2), whereas anti-androgens like PAHs or phthalates are more stable (Clara et al., 2010).
3.5.
AhR agonistic activity
The aryl-hydrocarbon agonistic activity was reduced by an average of 81% (STP A)e96% (STP B) during conventional WW treatment (Fig. 3A, B). Ozonation resulted in further reduction by 80% (STP B) to 90% (STP A; Fig. 3A, B). Removal effectiveness of ACSF (average of 82%) was comparable to that of O3. The considerable removal of AhR agonistic activity after advanced WW treatment steps indicates an effective
reduction of potentially hazardous compounds like PAHs, PCBs (polychlorinated biphenyls), furans, and dioxins. A study by Macova et al. (2010) point out that AhR agonistic activity in WW may be attributed to chemicals other than dioxins, polychlorinated biphenyls (PCBs) and furans. Macova et al. (2010) reported AhR agonistic activities in STP effluents below 1 ng/L TCDD-EQs. According to a circa 10-fold lower 50% effect concentration (EC50) for TCDD compared to b-NF (Miller, 1999), the assumed TCDD-EQs should be approximately one order of magnitude lower than the calculated b-NF-EQs. Thus, the measured activities in the present study are probably about 100 times higher compared to the Australian study. Such discrepancies might be a result of a different effluent composition at the investigated treatment plants. Furthermore, evaporation of sample extracts might lead to the loss of volatile AhR agonists as reported by Gustavsson et al. (2004). Due to their high hydrophobicity, AhR agonists largely bind to particulate organic matter (Dagnino et al., 2010) and are subsequently released to a certain extend in STPs (Suares Rocha et al., 2010). Consequently, different pore sizes of the sample filters influence the results as well. In the present study, WW samples were filtered before extraction with a pore size of 1.2 mm, and hence the overall activity in the WW samples (including particulate matter) was presumably higher than analysed. Nonetheless, our data emphasize that STP effluents are potential point sources for dioxin-like chemicals and PAHs in the aquatic environment. Especially sediments in urbanized areas are often contaminated by AhR agonists (Hollert et al., 2002). According to a study by Brack et al. (2005), dioxins, PCBs, and furans contribute only to a minor extend to AhR-mediated effects in sediments, conforming to the study by Macova et al. (2010). Brack et al. (2005) identified nonpriority PAHs as major contributors to respective activities in river sediments. An effective PAH degradation with O3 has already been documented, however, possibly at the expense of an increased non-specific toxicity as a result of oxidation by-product formation (Luster-Teasley et al., 2002). However, results of the applied yeast-based reporter gene test system are not necessarily transferable to in vivo conditions as it does not take into account the potential adsorption
Fig. 3 e AhR agonistic activities (b-naphthoflavone equivalents, b-NF-EQs) during 6 (STP A) or 9 sampling campaigns (STP B; INF: n [ 3) as determined in a recombinant yeast screen. Displayed are the mean activities of eight pseudo replicates for each sample. Average b-NF-EQ removal is stated as % compared to INF (DINF) or SC (DSC). INF, influent; SC, after the secondary clarifier; O3, after ozonation; O3-SF, O3 after sand filtration; ACSF, SC after activated carbon treatment.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 1 5 e1 0 2 4
1021
Fig. 4 e Percentage removal of estrogenic (A), anti-androgenic (B) and aryl-hydrocarbon agonistic activity (C) at different ozone doses.
of substances to test material, the bioconcentration ability as well as metabolic transformation and excretion of chemicals. Consequently, the yeast dioxin screen can deliver different results as test systems based upon the AhR-dependent induction of CYP1A1 (EROD assay; Sugihara et al., 2008) and hence further research might be appropriate.
3.6.
Ozone dose dependent removal of endocrine activity
Estrogenicity removal reached 90% even at the lowest ozone dose of 0.4 g O3/g DOC (Fig. 4A), confirming the high susceptibility of estrogenically active compounds to ozone attack (Huber et al., 2004). F-EQ removal was less effective at 0.4 g O3/g DOC (45%), whereas removal was elevated to >80% at doses >1.0 g O3/g DOC (O3-SF, Fig. 4B). AhR agonistic activity was least effectively reduced at 0.4 g O3/g DOC (27%), while around 80% removal was achieved at doses >0.7 g O3/g DOC (Fig. 4C). These results suggest that O3 doses of 0.4 g O3/g DOC might be too low for an effective endocrine activity removal.
3.7.
Cytotoxicity
The cytotoxicity assay revealed non-specific toxic effects after SC at an average of 89% compared to the negative control (Fig. 5A, Table S10A). Compared to SC, cytotoxicity was reduced by 32% after O3 and further reduced by 49% during
sand filtration. Activated carbon treatment reduced toxic effects most effectively by 61% compared to SC. Samples extracted at pH 7 in DMSO revealed a reduced cytotoxicity in O3 compared to pH 2 by an average of 24% (Fig. 5B; Table S10A, B). Evaporation of methanolic extracts (extracted at pH 2) led to a reduction of cytotoxic effects by 52% (AC) to 73% (O3) after advanced treatments (Fig. 5C; Table S10D), in spite of a doubled sample concentration compared to the DMSO extracts. The different dosings were required to maximize differences between the treatment steps. The results underline that the choice of extraction method and sample preparation remarkably influences cytotoxic effects. Reduced toxicity of samples extracted at pH 7 compared to pH 2 indicates the presence of toxic compounds with acidic moieties after O3. Additionally, the complete evaporation of solvent extracts in the test wells led to a considerable loss of toxic volatile substances and hence to a consistent underestimation of toxic effects, particularly in O3. The observed cytotoxic effects were a result of a mixture of the extractable fraction of contaminants present in WW. This study focused on toxic effects induced by extractable organic pollutants. Potentially toxic ozonation by-products are neglected in the present toxicity analysis because such substances are hardly extractable via conventional SPE due to high polarities (Benner and Ternes, 2009) and degradability (Petala et al., 2006). Consequently, further research on the
Fig. 5 e Reduction of cell density compared to negative control after exposure to WW extracts. A: at pH 2 extracted samples in DMSO (5-fold concentrated), B: at pH 7 extracted samples in DMSO (5-fold), C: at pH 2 extracted samples in methanol (10-fold, evaporated to dryness before test). Average cytotoxicity removal is stated as % compared to SC (DSC). Negative control [ 0%; blank [ 100%; n [ 6. SC, secondary clarifier; O3, after ozonation; O3-SF, O3 after sand filtration; ACSF, activated carbon treatment; SE, standard error.
1022
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 1 5 e1 0 2 4
choice of extraction method is desirable to increase the portion of extractable polar oxidation products. The observed cytotoxicity after O3 did not argue for an effective non-specific toxicity reduction during ozonation as cytotoxicity was still on an average level of 62%, whereas in three out of six samples toxicity was >88%. These results point to the possibility that cytotoxic effects after O3 were caused by extractable oxidation products. Toxicity reduction after sand filtration of 23% possibly supports an effective byproduct removal, but non-specific toxicity was still elevated compared to ACSF by an average of 23% (Table S10A). An in vivo test with the zebra mussel e performed at the same treatment plant e led to comparable results: non-specific toxic effects occurred after O3, toxicity decreased after O3-SF, and ACSF was most effective in non-specific toxicity removal (Stalter et al., 2010a). Therefore, the applied cytotoxicity assay is possibly a sensitive in vitro tool to evaluate the non-specific toxicity reduction of advanced WW treatment methods. Reliable in vitro screening methods are preferable compared to chronic in vivo approaches due to logistical, cost and time constraints as well as ethical considerations. However, the portion of extractable polar oxidation products has to be increased, not to underestimate a potential toxication after ozonation (Stalter et al., 2010a,b). For a comprehensive evaluation of advanced WW treatment technologies, the analysis of EDC removal effectiveness is important, however, this should not be regarded as the essence of the matter. The challenge is not to confirm an effective reduction of receptor-mediated toxicity (because this is rather predictable with respect to pollutant degradation/ removal) but to test for an increase in non-specific toxicity due to by-product formation during ozonation (Petala et al., 2006; Stalter et al., 2010a,b). An appropriate in vitro bioassay, which enables a fast and reliable toxicity screening, would help to verify the by-product removal with post treatments like sand filtration and could promote an effect directed identification of toxic oxidation by-products.
4.
suggests that doses 0.4 g O3/g DOC are too low for an effective elimination of endocrine disrupting compounds. Cytotoxicity was most effectively removed during activated carbon treatment (61%), while ozonation is less efficient (32%). Volatile substances contribute considerably to cytotoxic effects, particularly after ozonation. Therefore, sample evaporation should be avoided for tests on non-specific toxicity. In the long run, on-site field studies at WW receiving water bodies (including, for example, community analyses of fish, macroinvertebrates, plants and microorganisms as well as biomarker approaches) e before and after upgrading STPs e could allow to draw environmentally relevant conclusions regarding benefits and risks of advanced WW treatment methods.
Acknowledgments The authors would like to thank Stefan Ingenhaag (Grontmij Deutsche Projekt Union GmbH, Cologne, Germany) for his technical assistance at STP Neuss. Installation and support with maintenance of the ozonation plant in Regensdorf was conducted by Daniel Rensch, Steve Brocker (Hunziker-Betatech AG), Saskia Zimmerman and Dr Christoph Ort (EAWAG, Switzerland). Furthermore we thank Prof Charles A. Miller (Tulane University, New Orleans, USA) and Prof John Sumpter (Brunel University, Uxbridge, UK) for providing the recombinant yeast strains, Prof Gu¨nter Stalla and Dr Ulrich Renner (MPI, Munich, Germany) for providing GH3 cells as well as Prof Henner Hollert (RWTH Aachen, Germany), Prof Lucy Lee (Wilfrid Laurier University,), and Prof Niels Bols (University of Waterloo, Canada) for providing RTL-W1 cells. Moreover, we thank Dr Ulrike Schulte-Oehlmann for reviewing the manuscript. This study was part of the EU project Neptune (contract no 036845, SUSTDEV-2005-3.II.3.2) and co-funded by the BAFU (Switzerland) within the Strategy MicroPoll program (contract no 05.0013.PJ/F471-0916).
Conclusions
Conventional activated sludge treatment of wastewater reduces endocrine activity effectively (78e99%), but remaining concentrations of estrogens and anti-androgens still exceed environmental quality standards or effect concentrations, respectively, and hence might be of environmental relevance. Masking effects could explain the absence of anti-androgenicity and anti-estrogenicity due to the high agonistic activities in the untreated wastewater. Accordingly, the appearance of antagonistic activities after the secondary clarifier is possibly due to the more effective removal of respective agonists during conventional treatment. These results indicate the importance of analysing agonists as well as antagonists to evaluate the in vitro endocrine disrupting potential of a complex chemical mixture. The endocrine activity and AhR agonistic activity is effectively reduced during advanced wastewater treatment steps (63e99%), apart from androgenicity and anti-estrogenicity, which were not affected consistently. The analysis of endocrine activity removal at different ozone doses
Appendix. Supplementary material Additional information on treatment plant characteristics, test systems, and test results are available at the journal’s homepage. Supplementary data associated with this article can be found in the online version, at doi:10.1016/j.watres.2010.10.008.
references
Alnafisi, A., Hughes, J., Wang, G.D., Miller, C.A., 2007. Evaluating polycyclic aromatic hydrocarbons using a yeast bioassay. Environmental Toxicology and Chemistry 26 (7), 1333e1339. Benner, J., Ternes, T.A., 2009. Ozonation of propranolol: formation of oxidation products. Environmental Science & Technology 43 (13), 5086e5093. Brack, W., Schirmer, K., Erdinger, L., Hollert, H., 2005. Effectdirected analysis of mutagens and ethoxyresorufin-O-
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 1 5 e1 0 2 4
deethylase inducers in aquatic sediments. Environmental Toxicology and Chemistry 24 (10), 2445e2458. Clara, M., Windhofer, G., Hartl, W., Braun, K., Simon, M., Gans, O., Scheffknecht, C., Chovanec, A., 2010. Occurrence of phthalates in surface runoff, untreated and treated wastewater and fate during wastewater treatment. Chemosphere 78 (9), 1078e1084. Dagnino, S., Gomez, E., Picot, B., Cavailles, V., Casellas, C., Balaguer, P., Fenet, H., 2010. Estrogenic and AhR activities in dissolved phase and suspended solids from wastewater treatment plants. Science of the Total Environment 408 (12), 2608e2615. Escher, B.I., Bramaz, N., Ort, C., 2009. Monitoring the treatment efficiency of a full scale ozonation on a sewage treatment plant with a mode-of-action based test battery. Journal of Environmental Monitoring 11 (10), 1836e1846. Filby, A.L., Shears, J.A., Drage, B.E., Churchley, J.H., Tyler, C.R., 2010. Effects of advanced treatments of wastewater effluents on estrogenic and reproductive health impacts in fish. Environmental Science & Technology 44 (11), 4348e4354. Grund, S., Higley, E., Scho¨nenberger, R., Suter, M., Giesy, J., Braunbeck, T., Hecker, M., Hollert, H., 2010. The endocrine disrupting potential of sediments from the Upper Danube River (Germany) as revealed by in vitro bioassays and chemical analysis. Environmental Science and Pollution Research. doi:10.1007/s11356-010-0390-3. Gustavsson, L.K., Klee, N., Olsman, H., Hollert, H., Engwall, M., 2004. Fate of ah receptor agonists during biological treatment of an industrial sludge containing explosives and pharmaceutical residues. Environmental Science and Pollution Research 11 (6), 379e387. Harris, C.A., Routledge, E.J., Schaffner, C., Brian, J.V., Giger, W., Sumpter, J.P., 2007. Benzotriazole is antiestrogenic in vitro but not in vivo. Environmental Toxicology and Chemistry 26 (11), 2367e2372. Hill, E.M., Evans, K.L., Horwood, J., Rostkowski, P., Oladapo, F.O., Gibson, R., Shears, J.A., Tyler, C.R., 2010. Profiles and some initial identifications of (anti) androgenic compounds in fish exposed to wastewater treatment works effluents. Environmental Science & Technology 44 (3), 1137e1143. Hollender, J., Zimmermann, S.G., Koepke, S., Krauss, M., McArdell, C.S., Ort, C., Singer, H., von Gunten, U., Siegrist, H., 2009. Elimination of organic micropollutants in a municipal wastewater treatment plant upgraded with a full-scale postozonation followed by sand filtration. Environmental Science & Technology 43 (20), 7862e7869. Hollert, H., Durr, M., Olsman, H., Halldin, K., Van Bavel, B., Brack, W., Tysklind, M., Engwall, M., Braunbeck, T., 2002. Biological and chemical determination of dioxin-like compounds in sediments by means of a sediment triad approach in the catchment area of the River Neckar. Ecotoxicology 11 (5), 323e336. Huber, M.M., Ternes, T.A., von Gunten, U., 2004. Removal of estrogenic activity and formation of oxidation products during ozonation of 17 alpha-ethinylestradiol. Environmental Science & Technology 38 (19), 5177e5186. Jobling, S., Beresford, N., Nolan, M., Rodgers-Gray, T., Brighty, G.C., Sumpter, J.P., Tyler, C.R., 2002. Altered sexual maturation and gamete production in wild roach (Rutilus rutilus) living in rivers that receive treated sewage effluents. Biology of Reproduction 66 (2), 272e281. Jobling, S., Tyler, C.R., 2006. Introduction: the ecological relevance of chemically induced endocrine disruption in wildlife. Environmental Health Perspectives 114, 7e8. Jobling, S., Burn, R.W., Thorpe, K., Williams, R., Tyler, C., 2009. Statistical modeling suggests that antiandrogens in effluents from wastewater treatment works contribute to widespread sexual disruption in fish living in English rivers. Environmental Health Perspectives 117 (5), 797e802.
1023
Joss, A., Siegrist, H., Ternes, T.A., 2008. Are we about to upgrade wastewater treatment for removing organic micropollutants? Water Science and Technology 57 (2), 251e255. Katsiadaki, I., Morris, S., Squires, C., Hurst, M.R., James, J.D., Scott, A.P., 2006. Use of the three-spined stickleback (Gasterosteus aculeatus) as a sensitive in vivo test for detection of environmental antiandrogens. Environmental Health Perspectives 114, 115e121. Lee, L.E.J., Clemons, J.H., Bechtel, D.G., Caldwell, S.J., Han, K.B., Pasitschniakarts, M., Mosser, D.D., Bols, N.C., 1993. Development and characterization of a rainbow-trout livercell line expressing cytochrome P450-dependent monooxygenase activity. Cell Biology and Toxicology 9 (3), 279e294. Liu, Z.-h., Kanjo, Y., Mizutani, S., 2009. Removal mechanisms for endocrine disrupting compounds (EDCs) in wastewater treatment e- physical means, biodegradation, and chemical advanced oxidation: a review. Science of the Total Environment 407 (2), 731e748. Luster-Teasley, S.L., Yao, J.J., Herner, H.H., Trosko, J.E., Masten, S. J., 2002. Ozonation of chrysene: evaluation of byproduct mixtures and identification of toxic constituent. Environmental Science & Technology 36 (5), 869e876. Macova, M., Escher, B.I., Reungoat, J., Carswell, S., Chue, K.L., Keller, J., Mueller, J.F., 2010. Monitoring the biological activity of micropollutants during advanced wastewater treatment with ozonation and activated carbon filtration. Water Research 44 (2), 477e492. Miller, C.A., 1999. A human aryl hydrocarbon receptor-signaling pathway constructed in yeast displays additive responses to ligand mixtures. Toxicology and Applied Pharmacology 160 (3), 297e303. Moltmann, J.F., Liebig, M., Knacker, T., Keller, M., Scheurer, M., Ternes, T., 2007. Relevance of Endocrine Disrupting Substances and Pharmaceutical in Surface Waters. Final report. German Federal Environmental Agency. http://www. umweltdaten.de/publikationen/fpdf-l/3324.pdf Contract no. 20524205. Nishihara, T., Nishikawa, J., Kanayama, T., Dakeyama, F., Saito, K., Imagawa, M., Takatori, S., Kitagawa, Y., Hori, S., Utsumi, H., 2000. Estrogenic activities of 517 chemicals by yeast two-hybrid assay. Journal of Health Science 46 (4), 282e298. Nowotny, N., Epp, B., von Sonntag, C., Fahlenkamp, H., 2007. Quantification and modeling of the elimination behavior of ecologically problematic wastewater micropollutants by adsorption on powdered and granulated activated carbon. Environmental Science & Technology 41 (6), 2050e2055. Palomino, J.C., Martin, A., Camacho, M., Guerra, H., Swings, J., Portaels, F., 2002. Resazurin microtiter assay plate: Simple and inexpensive method for detection of drug resistance in Mycobacterium tuberculosis. Antimicrobial Agents and Chemotherapy 46 (8), 2720e2722. Petala, M., Samaras, P., Zouboulis, A., Kungolos, A., Salkellaropoulos, G., 2006. Ecotoxicological properties of wastewater treated using tertiary methods. Environmental Toxicology 21 (4), 417e424. Routledge, E.J., Sumpter, J.P., 1996. Estrogenic activity of surfactants and some of their degradation products assessed using a recombinant yeast screen. Environmental Toxicology and Chemistry 15 (3), 241e248. Santos, M.M., Reis-Henriques, M.A., Guillot, R., Lima, D., FrancoDuarte, R., Mendes, I., Queiros, S., Castro, L.F.C., 2008. Antiandrogenic effects of sewage treatment plant effluents in the prosobranch gastropod Nucella lapillus. Comparative Biochemistry and Physiology.Toxicology & Pharmacology 148 (1), 87e93. Schaar, H., Clara, M., Gans, O., Kreuzinger, N., 2010. Micropollutant removal during biological wastewater
1024
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 1 5 e1 0 2 4
treatment and a subsequent ozonation step. Environmental Pollution 158 (5), 1399e1404. Stalter, D., Magdeburg, A., Oehlmann, J., 2010a. Comparative toxicity assessment of ozone and activated carbon treated sewage effluents using an in vivo test battery. Water Research 44 (8), 2610e2620. Stalter, D., Magdeburg, A., Weil, M., Knacker, T., Oehlmann, J., 2010b. Toxication or detoxication? In vivo toxicity assessment of ozonation as advanced wastewater treatment with the rainbow trout. Water Research 44 (2), 439e448. Suares Rocha, P., Azab, E., Schmidt, B., Storch, V., Hollert, H., Braunbeck, T., 2010. Changes in toxicity and dioxin-like activity of sediments from the Tieteˆ River (Sa˜o Paulo, Brazil). Ecotoxicology and Environmental Safety 73 (4), 550e558. Sugihara, K., Okayama, T., Kitamura, S., Yamashita, K., Yasuda, M., Miyairi, S., Minobe, Y., Ohta, S., 2008. Comparative study of aryl hydrocarbon receptor ligand activities of six chemicals in vitro and in vivo. Archives of Toxicology 82 (1), 5e11.
Thomas, K.V., Langford, K., Petersen, K., Smith, A.J., Tollefsen, K. E., 2009. Effect-directed identification of naphthenic acids as important in vitro xeno-estrogens and anti-androgens in North Sea offshore produced water discharges. Environmental Science & Technology 43 (21), 8066e8071. von Gunten, U., 2003. Ozonation of drinking water: part I. Oxidation kinetics and product formation. Water Research 37 (7), 1443e1467. Wagner, M., Oehlmann, J., 2009. Endocrine disruptors in bottled mineral water: total estrogenic burden and migration from plastic bottles. Environmental Science and Pollution Research 16 (3), 278e286. Weiss, J.M., Hamers, T., Thomas, K.V., van der Linden, S., Leonards, P.E.G., Lamoree, M.H., 2009. Masking effect of antiandrogens on androgenic activity in European river sediment unveiled by effect-directed analysis. Analytical and Bioanalytical Chemistry 394 (5), 1385e1397. Zhang, H.C., Huang, C.H., 2003. Oxidative transformation of triclosan and chlorophene by manganese oxides. Environmental Science & Technology 37 (11), 2421e2430.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 2 5 e1 0 3 8
Available at www.sciencedirect.com
journal homepage: www.elsevier.com/locate/watres
Surveillance of adenoviruses and noroviruses in European recreational waters A. Peter Wyn-Jones a,*, Annalaura Carducci b, Nigel Cook c, Martin D’Agostino c, Maurizio Divizia d, Jens Fleischer e, Christophe Gantzer f, Andrew Gawler g, Rosina Girones h, Christiane Ho¨ller i, Ana Maria de Roda Husman j, David Kay a, Iwona Kozyra k, Juan Lo´pez-Pila l, Michele Muscillo m, Maria Sa˜o Jose´ Nascimento n, George Papageorgiou o, Saskia Rutjes j, Jane Sellwood p, Regine Szewzyk l, Mark Wyer a a
IGES, University of Aberystwyth, Ceredigion, SY23 3DB, UK Department of Biology, Universita` di Pisa, Italy c Food and Environment Research Agency, FERA, York, UK d Faculty of Medicine, Tor Vergata University, Rome, Italy e Landesgesundheitsamt Baden-Wu¨rttemberg, Germany f Faculte´ de Pharmacie, University Henri Poincare´, Nancy, France g Environment Agency, United Kingdom h Department of Microbiology, Faculty of Biology, University of Barcelona, Spain i Bayerisches Landesamt fu¨r Gesundheit und Lebensmittelsicherheit, Germany j National Institute for Public Health and the Environment (RIVM), The Netherlands k National Veterinary Research Institute, Pulawy, Poland l Umweltbundesamt, Berlin, Germany m Istituto Superiore Sanita`, Rome, Italy n Faculdade de Farma´cia, Universidade do Porto, Porto, Portugal o Environmental Virology Laboratory, State General Laboratory, Cyprus p Environmental Virology Unit, Health Protection Agency, UK b
article info Article history: Received 27 April 2010 Received in revised form 20 August 2010 Accepted 13 October 2010 Available online 29 October 2010
abstract Exposure to human pathogenic viruses in recreational waters has been shown to cause disease outbreaks. In the context of Article 14 of the revised European Bathing Waters Directive 2006/7/EC (rBWD, CEU, 2006) a Europe-wide surveillance study was carried out to determine the frequency of occurrence of two human enteric viruses in recreational waters. Adenoviruses were selected based on their near-universal shedding and environmental survival, and noroviruses (NoV) selected as being the most prevalent gastroenteritis agent worldwide. Concentration of marine and freshwater samples was done by adsorption/elution followed by molecular detection by (RT)-PCR. Out of 1410 samples, 553 (39.2%)
Keywords:
were positive for one or more of the target viruses. Adenoviruses, detected in 36.4% of
Adenoviruses
samples, were more prevalent than noroviruses (9.4%), with 3.5% GI and 6.2% GII, some
Noroviruses
samples being positive for both GI and GII. Of 513 human adenovirus-positive samples, 63
Bathing water
(12.3%) were also norovirus-positive, whereas 69 (7.7%) norovirus-positive samples were
River water
adenovirus-negative. More freshwater samples than marine water samples were virus-
Sea water
positive. Out of a small selection of samples tested for adenovirus infectivity,
* Corresponding author. Tel.: þ44 191 384 2749. E-mail address:
[email protected] (A.P. Wyn-Jones). 0043-1354/$ e see front matter ª 2010 Elsevier Ltd. All rights reserved. doi:10.1016/j.watres.2010.10.015
1026
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 2 5 e1 0 3 8
Recreational water
approximately one-quarter were positive. Sixty percent of 132 nested-PCR adenovirus-
Water quality
positive samples analysed by quantitative PCR gave a mean value of over 3000 genome copies per L of water. The simultaneous detection of infectious adenovirus and of adenovirus and NoV by (RT)PCR suggests that the presence of infectious viruses in recreational waters may constitute a public health risk upon exposure. These studies support the case for considering adenoviruses as an indicator of bathing water quality. ª 2010 Elsevier Ltd. All rights reserved.
1.
Introduction
Enteric viruses have frequently been implicated in recreational water-related gastro-intestinal (G.I.) disease (Sinclair et al., 2009). Studies in Europe and the US suggest that most infections contracted as a result of swimming, canoeing or other recreational use of sewage-polluted water may be viral in nature (e.g. Medema et al., 1995; Gray et al., 1997). Enteric viruses may cause asymptomatic or mild infections in humans, but these faecal-orally transmitted viruses may also cause more serious disease, such as hepatitis and meningitis, especially in vulnerable groups, e.g. young children (Nwachuku and Gerba, 2006). Enteric viruses are recognized as agents that can cause large outbreaks throughout the world with thousands of cases (Sarguna et al., 2007; Bucardo et al., 2007; Iijima et al., 2008; Zhang et al., 2009). Novel emerging viruses such as SARS coronavirus, human parechovirus and zoonotic influenza viruses also appear to be excreted in faeces but the evidence for enteric transmission is not always clear (Ding et al., 2004). Transmission routes for enteric viruses may be diverse such as personeperson, food- or waterborne associated with insufficient hygiene and sanitation (Koopmans et al., 2002; Wyn-Jones and Sellwood, 2001). Disease outbreaks associated with enteric viruses, such as noroviruses and astroviruses, in bathing water have been described (Hauri et al., 2005; Maunula et al., 2004). However, bathing water-related outbreaks may be easily missed due to either unidentified source or unidentified agent, or both. Enteric viruses in water may originate from discharges of raw or treated sewage, run-off of animal manure or directly from humans or animals. Viruses commonly associated with waterborne disease include the human adenoviruses (HAdVs), noroviruses (NoVs), hepatitis A and E viruses (HAV, HEV), parvoviruses, enteroviruses, and rotaviruses (RVs). In addition, sewage, especially from slaughterhouses, may contain (for example) animal adenoviruses, sapoviruses, and HEV (Hundesa et al., 2006), which may be zoonotic. Viruses originating from (un)treated sewage can contaminate bathing water after discharge into surface waters (in)directly used for recreational water activities. All are capable of infection by ingestion. Some multiply in the intestine and may cause diarrhoea and/or vomiting, while some are associated with tissues (e.g. the liver) other than the gut. The viruses responsible for waterborne infections are not usually identified at the time of a disease outbreak following recreational water activity, and robust associations between the simultaneous presence of virus in faeces of affected individuals and in the water are only occasionally demonstrated (e.g. Hoebe et al., 2004). The epidemiological picture of disease associated with recreational use of water is therefore far from complete, and measures to limit
enteric disease after exposure to recreational water are based on water quality parameters built on the detection of faecal bacterial indicator organisms (FIOs). However, it has been shown that water conforming to bacterial standards may contain high levels of human enteric viruses and that FIOs often fail to predict the risk for waterborne pathogens including enteric viruses (Gerba et al., 1979; Lipp et al., 2001). Further, several studies have shown that levels of indicator bacteria do not correlate with those of viruses, particularly when faecal indicator concentrations are low (Contreras-Coll et al., 2002). Viruses are known to be more resistant to environmental degradation than bacteria (Vasl et al., 1981; Thurston-Enriquez et al., 2003; Rzezutka and Cook, 2004; de Roda Husman et al., 2009). Together with the understanding that G.I. illness may be due to viruses rather than bacteria, this provides a case for using a viral indicator of human faecal pollution rather than to rely exclusively on bacterial parameters. Bathing water quality in the European Union (EU) has been regulated since 1976 by the Bathing Water Directive (76/160/ EEC). In 2006 this was revised (rBWD, CEU, 2006) by including enterococci (and, in fresh waters, Escherichia coli) as the principal microbial determinants which placed the microbiological parameters on a firmer scientific footing (Kay et al., 1994, 2004: Wiedenmann et al., 2006; WHO, 2003) and allowed classification of bathing waters to be undertaken with more confidence. When tested at sufficient frequency E. coli may be a useful indicator of faecal pollution and therefore of the probability of waterborne disease. However, in the EU Directive the frequency is only about once in two weeks and testing takes two days. The earlier Directive included an enterovirus parameter which stipulated that 95% of 10-L water samples taken during the bathing season should contain no (zero p.f.u.) enteroviruses. This was based on early work (described by Farrah and Bitton, 1990) which suggested that, for poliovirus, Coxsackie A and Coxsackie B viruses, between one and twenty virus infectious units might be sufficient to cause infection. The pathogenesis of enterovirus infections is now better understood, and this belief is considered unsound in determining water quality. Further, although important pathogens in many contexts, the presence of enteroviruses in water does not necessarily correlate with the presence of pathogens such as hepatitis A virus (Dubrou et al., 1991; Pina et al., 1998). The enterovirus parameter was removed during the revision of the 1976 Directive. Concentrations of some viruses in surface waters can be determined by cell culture monolayer plaque assays, but the technique is not applicable to most viruses of prime interest. Furthermore, cell culture is expensive and time-consuming, and detection of viruses is now done mainly by molecular methods such as reverse transcription RT-PCR or nucleic acid
1027
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 2 5 e1 0 3 8
sequence-based amplification (NASBA) which amplify RNA/ DNA. Although mainly described as end-point assays, amplification products of both techniques can be detected by realtime methods. The major advantages of real-time detection are hands-on time and the ability to quantify amplification products, which is very important in being able to estimate the public health risks of low levels of enteric viruses in bathing water. A viral indicator may be better suited to indicate the risk of human pathogenic viruses in bathing waters. However, cell culture-based methods for viral detection are costly, require specialised skills and equipment, and have too long a turnaround time. For this reason, the EU Framework 6 Project VIROBATHE was done to devise a robust, rapid and cost-efficient method for routine compliance monitoring of enteric viruses in recreational waters. Part of the work involved Europe-wide surveillance of recreational waters to determine the frequency of target virus occurrence and, to a limited extent, serotypes and quantities. So that the virus levels could be seen in the context of compliance-related water quality, the work also included determination of FIO levels to provide general water quality data. The viruses selected as targets were adenoviruses and noroviruses. The former are shed by many individuals (often without showing symptoms), they are more environmentally robust than enteroviruses (Enriquez et al., 1995; ThurstonEnriquez et al., 2003), they have been found in surveys of polluted waters (e.g. Pina et al., 1998; Laverick et al., 2004; Lee et al., 2004; Miagostovich et al., 2008), and have been associated with outbreaks of disease in swimming pools (e.g. Papapetropolou and Vantarakis, 1995; Harley et al., 2001) and other recreational waters (Sinclair et al., 2009). Being DNA viruses, their detection by PCR does not have the problems associated with the genetic variation seen with RNA viruses. They are also more likely to be detected in recreational water samples (e.g. Pina et al., 1998; Miagostovich et al., 2008), especially if sensitive nucleic acid detection methods are used, and they may therefore provide the best indicator of viral faecal pollution. Noroviruses are the most important cause of acute viral gastroenteritis in people of all age groups and many waterborne outbreaks have been reported. Sinclair et al. (2009) reviewed 55 recreational water-related G.I. disease outbreaks of which 25 (46%) were reported as caused by noroviruses. The study reported here was performed to demonstrate that a common concentration protocol could be used across recreational waters in widely diverse geographical areas, that viruses concentrated by this protocol could be detected by a rapid molecular method, that it was possible to enumerate viruses and to investigate whether there was a range of sero/ genotypes of the target viruses present across the locations studied.
2.
Materials and methods
2.1.
Survey design
Each of the 15 Surveillance Laboratories located in nine countries selected up to two sites for study which were sampled during the EU Bathing Season 2006, and samples were concentrated and analysed for the target viruses by
molecular means. FIOs and various physico-chemical parameters were also determined. Data were sent to the coordinating Laboratory at the University of Aberystwyth for collation.
2.2.
Sampling sites
Each laboratory selected up to two sites (main site and second site) for the study (Table 1 and Fig. 1). The principal criterion for a site being chosen was its current use for recreational water activity; sites were not chosen on the basis of being EUdesignated bathing waters, nor because they had a history of pollution in the area, though several sites were known to be impacted by sewage effluent. A minimum of 80 10-L water samples from the main site was taken and up to 20 additional samples were taken in the event of (e.g.) heavy rain or when investigators considered that there was some other occurrence which may have resulted in deterioration of water quality. The second site could also be used if the main site yielded negative data in the first stages of sampling, or for taking the 20 additional samples following the 80 minimum to be taken at the main site. Thus, each laboratory could focus on one site (100 samples) or divide surveillance between the main site (80 samples) and the second site (20 samples). In practice both approaches were used, so in total, 24 sites were sampled. Sites were sampled at approximately weekly intervals from the end of May to the beginning of November 2006, which included the Bathing Season in all Member States. On each
Table 1 e Location of sampling sites. Site* 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Country
Location
Cyprus France Germany
Larnaca Nancy BadenWu¨rttemberg Germany BadenWu¨rttemberg Germany Bavaria Germany Berlin Germany Berlin Italy Pisa Italy Pisa Italy Castel Gandolfo Italy Ardea (Rome) Italy Pomezia (Rome) Netherlands Durgerdam Netherlands Leerdam Poland Pulawy Portugal Porto Portugal Porto Spain Barcelona Spain Barcelona UK York UK Devon UK Devon UK Kew (London) UK Reading
*See also Fig. 1 for site locations.
Site name
Water type
Larnaca Marina Tomblaine Neckar River
Marine Fresh Fresh
Kirchentellinsfurt Lake Amper Grasslfing Wannsee Landwehrkanal San Rossore Bocca d’Arno Castel Gandolfo Lake Fosso dell’Incastro Rio Torto Kinselmeer Linge VistulaRiver Molhe South Molhe North Gava` Gava` Naburn Lock Axmouth Harbour River Kenn River Thames River Thames
Fresh Fresh Fresh Fresh Marine Marine Fresh Marine Marine Fresh Fresh Fresh Marine Marine Marine Marine Fresh Marine Marine Fresh Fresh
1028
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 2 5 e1 0 3 8
Fig. 1 e Location of sampling sites.
sampling occasion, four 10-L samples (a ‘tetrad’), plus one additional sample for positive Quality Control (QC) purposes, were collected from each site. One 250 mL sample for bacterial faecal indicators was also taken. In total each laboratory processed and analysed at least 100 water samples for virus detection and 25 samples for bacterial enumeration.
2.3.
Sample processing
Many methods for the concentration and detection of enteric viruses in water samples have been described (Wyn-Jones and Sellwood, 2001). For virological water quality to be assessed on a comparable basis, a single method common to all laboratories was needed for each water type (fresh or coastal/transitional) analysed during the surveillance programme. Prior to the surveillance stage several different methods were evaluated (see Section 3.1) using HAdV2 and NoV GII.4, and the best in terms of virus recovery and capital/recurrent costs was selected. The HAdV2 was obtained from the UK Health Protection Agency (HPA) National Collection of Pathogenic Viruses (NCPV), where the virus genome was authenticated. Virus was grown and assayed by plaque assay in A549 cultures and distributed by the HPA Environmental Virology Unit to
other laboratories. Norovirus GII.4 was identified in a faecal sample from an outbreak in a care home and the identity confirmed by sequencing. End-point dilution assay by RT-PCR gave a titre of 109. The suspension was distributed at 103 which provided sufficient virus for evaluation and quality control purposes for all laboratories throughout the project. Process characterisation was done by four experienced laboratories concentrating replicate samples of water spiked with HAdV2 and analysing the concentrates for recovered virus.
2.3.1. Concentration of freshwater samples by glass wool filtration For freshwater samples a modification of the glass wool method of Vilagine`s et al. (1993) was used. The glass wool filter was made by compressing 10 g glass wool (type 725; Rantigny, Saint-Gobain, France) into a 30 cm by 3 cm polystyrene column to obtain a filter height of 6e8 cm. The filter was washed by gravity with 50 mL volumes of (in order) 1 M HCl, tap water, and 1 M NaOH, followed by tap water until the filtrate pH was neutral. Water samples (10-L) were conditioned with 1 M or 0.1 M HCl to pH 3.5 to enhance binding of the viruses to the filter and passed through the filter at a rate not exceeding 1.5 L min1. When all the sample had passed
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 2 5 e1 0 3 8
through the filter the virus was eluted from the glass wool by slow (20e30 min) passage of 200 mL 3% (w/v) beef extract at pH 9.5 in 0.05 M glycine buffer through the filter. The eluate was flocculated by the addition of 1 M and 0.1 M HCl until the pH reached 3.5. The resultant protein floc, containing virus, was deposited by centrifugation at 7500 g for 30 min, dissolved to a final volume of 10 mL phosphate buffered saline (PBS) and stored at 20 C pending further analysis.
2.3.2. Concentration of marine water samples by nitrocellulose membrane filtration Coastal/transitional water samples were processed by filtration through nitrocellulose membranes, elution and organic flocculation (Wyn-Jones et al., 2000). The sample, at pH 3.5, was passed through a 142 mm diameter glass fibre pre-filter and a nitrocellulose membrane in a Sartorius filter holder at a maximum rate of 1.5 L min1. The filtrate was run to waste and the virus was then eluted from the membrane by slow passage (10 min) of 200 ml skimmed milk solution (0.1% in 0.05 M glycine buffer). The eluate was flocculated by reducing its pH to 4.5 with M HCl and centrifuging as above.
2.4.
Extraction of nucleic acids from sample concentrates
Nucleic acid (NA) was extracted from 5 mL volumes of sample concentrate using the NucliSens miniMAG system (Biome´rieux, France) according to manufacturer’s instructions, with slight modifications comprising centrifugation at 1500 g for 2 min after addition of the silica suspension to reduce the chance of cross-contamination. The final 100 mL NA extract was centrifuged at 13,000 g for 1 min to pellet any remaining traces of silica which could inhibit downstream (RT)PCR reactions, the supernatant was transferred to a clean microfuge tube and was stored at 80 C if not used immediately.
2.5.
Human adenovirus PCR
For the detection of human adenovirus in the water samples the nested-PCR based on the method of Allard et al. (2001) was employed, using primers Hex1deg and Hex2deg for the first round of amplification and primers nehex3deg and nehex4deg for the second round. Additionally, an internal amplification control (IAC, see below) was incorporated in the assay, and a carryover contamination prevention system utilising uracil-Nglycosylase (UNG) in the first round PCR and dUTP (replacing dTTP) in both PCRs. The reaction incorporated a hot-start polymerase (Platinum Taq DNA polymerase, Life Technologies Inc.). The target amplicon sizes were 301 bp in the first round and 171 bp in the second round. The first round reaction conditions were as follows: 10 mL DNA, 1X Platinum Taq buffer, 1.5 mM Mgþþ, 250 mM dNTPs, 0.5 mM primer Hex1deg, 0.5 mM primer Hex2deg, 1U Platinum Taq (Life Technologies Inc.), and 1 U HK-UNG (Epicentre, Madison, Wisconsin). Five mL IAC were added in the first round. Adenovirus DNA (20 ng mL1), and ultrapure water were included as positive and negative reaction control, respectively. After 10 min at 50 C (UNG) and 10 min at 95 C (activation of Taq polymerase), cycling conditions included 45 cycles of 94 C for 30 s, 55 C for 30 s and 72 C for 1 min, followed by a final extension of 72 C for 5 min. The second round reaction conditions were: 1X
1029
Platinum Taq buffer, 1.5 mM Mgþþ, 100 mM dNTPs, 0.5 mM primer nehex3deg, 0.5 mM primer nehex4deg, and 1U Platinum Taq. Two mL from the first round reaction were used as target. The thermocycling conditions were 94 C for 3 min, then 45 cycles of 94 C for 30 s, 55 C for 30 s and 72 C for 1 min, followed by a final extension of 72 C for 5 min. The amplicons were electrophoresed in a 2% agarose gel stained with 10 ng mL1 ethidium bromide or equivalent nucleic acid staining methods such as SYBR-Gold, and subsequently visualised by UV transillumination.
2.6.
Norovirus RT-PCR
To detect norovirus, the nested RT-PCR based on the method of Vennema et al. (2002) was used, and comprised amplification of norovirus RNA-dependent RNA polymerase (RdRp) gene sequences by RT-PCR followed by a semi-nested PCR for each genogroup (G). Depending on the laboratory, contamination carryover prevention was also incorporated utilising uracil-N-glycosylase (UNG) in the PCR. The target amplicon sizes were 327 bp in the RT-PCR, 188 bp in the GI nested PCR, and 237 bp in the GII nested PCR. Reverse transcription PCR conditions were as follows: 1X OneStep buffer (Qiagen, UK), 400 mM each dNTP, 1X OneStep enzyme mix (Qiagen, UK), 0.5 mM primer JV12Y, 0.5 mM primer JV13i, and 50U RNasin (RNasinPlus, Promega, UK), 1U Platinum Taq (Life Technologies Inc.). Five mL IAC were added in the first round. A 10 mL sample of nucleic acid was used as target. The thermocycling conditions were 50 C for 30 min, 95 C for 15 min, then 40 cycles of 94 C for 1 min, 37 C for 1 min and 72 C for 1 min, followed by a final extension of 72 C for 10 min. The second round PCR conditions were as follows: 1X Platinum Taq buffer, 2.0 mM Mgþþ, 200 mM dATP, 200 mM dCTP, 200 mM dGTP, 400 mM dUTP, 0.4 mM primer JV12Y, 0.4 mM primer Ni-R, 1U HK-UNG and 1U Platinum Taq. One mL from the first round reaction was used as target. The thermocycling conditions were 50 C for 10 min, 95 C for 10 min, 96 C for 3 min then 40 cycles of 95 C for 1 min, 40 C for 1 min and 72 C for 1 min, followed by a final extension of 72 C for 10 min. The amplicons were electrophoresed in a 2% agarose gel stained with 10 ng mL1 ethidium bromide or equivalent nucleic acid staining methods such as SYBR-Gold, and subsequently visualised by UV transillumination.
2.7.
Internal amplification controls (IACs)
The need to guard against false negative results required the use of a novel IAC in each PCR. For adenovirus IACs, oligonucleotides were constructed which contained the adenovirus primer sequences used in each round flanking primer sequences for amplification of invA sequences from Salmonella enterica (Malorny et al., 2003, 2004). The amplicon was cloned into a plasmid (pGem T-Easy vector) by Yorkshire Bioscience Ltd. (York, UK). The resulting pADENOIAC plasmid was linearised at the unique PstI site downstream of the adenovirus IAC insert region. Yorkshire Bioscience supplied pADENOIAC in 100 mL volumes containing 1 mg mL1 plasmid DNA in 10 mM TriseHCl, 1 mM EDTA buffer pH 8.0. The IAC amplicon sizes were 384 bp in the first round and 337 bp in the second round.
1030
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 2 5 e1 0 3 8
For the norovirus IAC the RNA was synthesized by the addition of complementary sequences of the first round primers JV12Y and JV13i to part of the b-globin gene, resulting in a PCR product of 369 base pairs. In this same construct sequences complementary to the GI nested-primer Ni-R and to the GII nested-primer GI were included. The construct was subsequently cloned downstream of a T7 RNA-polymerase promoter. The RNA IAC was prepared by Yorkshire Bioscience Ltd. (York, UK) using plasmid pnJV IAC which was linearised with Sal1 restriction endonucleases and purified. The resulting RNA was transcribed using the T7 RNA polymerase transcription system. Template DNA was removed from the preparation during incubation with RNase-free DNase. The RNA was purified by LiCl precipitation followed by multiple phenol/chloroform extractions. The preparation was concentrated to 1.0 mg mL1 by precipitation with ethanol and dissolving in a minimal volume of MilliQ/18.2 MU quality water. Both types of IAC were prepared in single batches by Yorkshire Bioscience, and checked and distributed to all participants by one of the participant laboratories (FERA). Amplification products of the IAC with the GI specific primers produced a PCR product of 228 base pairs, GII-specific amplification resulted in a PCR product of 277 base pairs. The working concentration of each IAC (in 10 mM TriseHCl, 1 mM EDTA buffer pH 8.0, plus 500 ng mL1 bovine serum albumin) was empirically determined as the dilution which consistently (triplicate determinations) gave a positive signal. Aliquots were stored at 20 C (adenovirus IAC) or 70 C (norovirus IAC). In a correctly functioning reaction, an IAC signal should always be produced in the absence of a target signal (high amounts of target can out-compete amplification of the IAC, but then the target signal itself shows that the reaction has worked). In this study, when an (RT)PCR of a sample produced neither IAC nor target signal, the presence of inhibitory substances derived from the water sample was assumed. Consequently, the nucleic extract was diluted ten-fold until the appearance of an IAC or target signal revealed that no inhibition was occurring.
2.8.
Infectivity determination
At least 10 adenovirus-positive (by nested-PCR) samples from each Laboratory were tested for virus infectivity by integrated cell culture-PCR (ICC-PCR, Reynolds et al., 2001; Greening et al., 2002). If any of the four test samples in a tetrad was positive by human adenovirus nested-PCR then the sample concentrate which had given the strongest PCR band was tested for infectious adenovirus by inoculation of cell cultures and nested-PCR analysis of the cultures after zero and five days’ incubation. No infectivity assay was performed if the adenovirus nested-PCR on all four concentrates was negative. At least two 25 cm2 flasks, each containing a monolayer of confluent A549 cells (European Collection of Cell Culture, ECACC, UK) were inoculated with 1 mL of sample concentrate. At least one flask was incubated for five days (T ¼ 5). One flask was analysed without incubation (T ¼ 0), to guard against detection of seed virus. One negative control with cell culture medium only was set up. Following incubation, flasks in the first set (T ¼ 5) were frozen and thawed three times and the
separated supernatant analysed by the adenovirus nested PCR. A positive nested-PCR signal after five days, coupled with a negative reaction after zero days (confirming that inoculum was not being detected) was taken as evidence of virus multiplication, and hence of infectivity.
2.9.
QPCR assay for the detection of HAdV DNA
Virus nucleic acid in at least 10 samples which were positive for adenovirus by nested-PCR from each Laboratory was quantified by real-time qPCR. The nucleic acid extracts from these samples were diluted as was found necessary to observe a signal in the PCR (see Section 2.7). Assays were done in 25-mL reaction mixtures each containing 10 mL of nucleic acid extract and 15 mL of TaqMan Universal PCR Master Mix (Applied Biosystems) containing 0.9 mM of each primer (AdF and AdR) and 0.22 5 mM of fluorogenic probe (AdP1) as previously described (Hernroth et al., 2002). Following activation of the uracil-N-glycosylase (2 min, 50 C) and activation of the AmpliTaq Gold for 10 min at 95 C, 45 cycles (15 s at 95 C and 1 min at 60 C) were performed. A pBR322 plasmid containing the HAdV 41 hexon sequence kindly donated by Dr. Annika Allard from the University of Umea˚, Sweden, was used to construct a standard containing 101e107 copies of DNA in the 10 mL added to the PCR reaction. Each dilution of standard DNA suspensions was run in triplicate. Ten mL of undiluted and a ten-fold dilution of the DNA suspensions obtained from water samples were run in duplicate. In all QPCRs the amount of DNA was defined as the mean of the data obtained. A non-template control and a nonamplification control were added to each run.
2.10.
Sequence analysis
The amplicons obtained after nested-PCR assays of HAdV or NoV were purified using the QIAquick PCR purification kit (QIAGEN, Inc.). Purified DNA was directly sequenced with the ABI PRISM Dye Terminator Cycle Sequencing Ready Reaction kit version 3.1 with Ampli Taq DNA polymerase FS (Applied Biosystems) following the manufacturer’s instructions. The conditions for the 25-cycle sequencing amplification were: denaturing at 96 C for 10 s, annealing for 5 s at 50 C and extension at 60 C for 4 min. The nested primers were used for sequencing at a concentration of 0.05 mM. The results were checked using the ABI PRISM 377 automated sequencer (PerkineElmer, Applied Biosystems). The sequences were compared with the GenBank and the EMBL (European Molecular Biology Library) using the basic BLAST program of the NCBI (The National Center for Biotechnology Information, http://www.ncbi.nlm.nih.gov/BLAST/). Alignments of the sequences were carried out using the ClustalW program of the EBI (European Bioinformatics Institute of the EMBL, http://www.ebi.ac.uk/clustalw/).
2.11.
Faecal indicator organisms
Detection of E. coli and intestinal enterococci was done according to ISO 9308-3 and ISO 7899-1 using Microtiter plates. One laboratory enumerated bacteria by colony-forming units (cfu).
1031
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 2 5 e1 0 3 8
The robustness of the methods was calculated using the results obtained from the analysis of quality control samples. Nine laboratories participated in the trial of the methods for analysis of fresh waters and six laboratories participated in the trial of the methods for analysis of marine samples. Test samples comprised 1 mL aliquots of adenovirus Type 2 (containing 200 pfu of virus), and norovirus GII.4 which were added by the participants to their own water samples. A batch of adenovirus Type 2 and a batch of norovirus GII.4 were prepared, distributed into single-use ampoules and sent to each participant. On each sampling occasion 1 mL of the adenovirus Type 2 and 1 mL of the norovirus-positive control material were added to a separate 10-L quality control sample of the recreational water being tested. Negative samples were prepared from a mixture of de-ionised and tap water, or artificial seawater. Each participant analysed at least 25 sets of quality control samples. The raw data sent by each laboratory were statistically analysed according to the recommendations of Scotter et al. (2001) by the methods of Langton et al. (2002). The trial sensitivity was defined as the percentage of positive samples giving a correct positive signal, and trial specificity was defined as the percentage of negative samples giving a correct negative signal. Accordance (repeatability of qualitative data) was defined as the percentage chance of finding the same result, positive or negative, from two identical samples analysed in the same laboratory under predefined repeatability conditions, and concordance (reproducibility of qualitative data) was defined as the percentage chance of finding the same result, positive or negative, from two identical samples analysed in different laboratories under predefined repeatability conditions. These calculations take into account different replication in different laboratories by weighting results appropriately. The concordance odds ratio (COR) was the degree of inter-laboratory variation in the results, and expressed as the ratio between accordance and concordance percentages (Langton et al., 2002). The COR value may be interpreted as the likelihood of getting the same result from two identical samples, whether they are sent to the same laboratory or to two different laboratories. The closer the value is to 1.0, the higher is the likelihood of getting the same result. Confidence intervals for accordance, concordance and COR were calculated by the method of Davison and Hinckley (1997); each laboratory was considered representative of all laboratories in the “population” of laboratories, not just those participating in this analysis.
3.
Results
The study surveillance period ran from the end of May until early November 2006. Nine participant Laboratories collected samples at both of their sampling sites, whereas six Laboratories took samples from only their main site. Thirteen fresh water sites and 11 marine sites were sampled (Table 1 and Fig. 1). A total of 1410 samples was taken of which 928 were from fresh water and 482 were from marine sites (Table 1).
3.1.
Virus detection
Four experienced laboratories evaluated the concentration methods by processing replicate samples using different methods, and analysing the concentrates by (RT)PCR and, for HAdV2, monolayer plaque assay in A549 cultures. Concentration by three different methods gave mean recoveries of 49% and 37% of seeded HAdV2 from fresh and artificial sea water respectively, as measured by plaque assay. Across all evaluating laboratories, concentration of HAdV2 in spiked freshwater samples by glass wool with elution using beef extract gave a mean recovery of 57.1% (range 34.2%e78.2%), while concentration of virus in spiked artificial seawater samples with skimmed milk elution gave a mean recovery of 35.4% (range 22.5%e43.8%). The variation between laboratories’ performance made decisions on method choice based only on recovery values less than clearcut, which is why other factors such as cost were also taken into account. From the overall surveillance data 553 out of 1410 samples (39.2%) were positive for one or more of the target viruses (Fig. 2). This corresponded to 582 virus detections, some samples being positive for more than one kind of virus. Adenoviruses were detected more often than noroviruses, 513 (36.4%) samples being positive for one or more human adenovirus types, while 132 samples (9.4%) tested positive for one or both norovirus genogroups; these were divided between GI (49, 3.5% samples positive) and GII (88, 6.2%, Fig. 2). Five samples (two marine and three fresh water) were positive for both norovirus genogroups. Out of the 513 human adenovirus-positive samples, 63 (12.3%) were also positive for one or both NoV genogroups (33 out of 381 freshwater samples and 30 out of 132 marine samples). Just four samples (two fresh water and two marine), were positive for all three virus types. Interestingly, 69 samples (22 fresh water and 47 marine) were positive for one or both norovirus genogroups while testing negative for adenovirus.
3.2.
Water type
Freshwater sites showed a higher frequency of virus-positive samples than marine sites (Fig. 3). Adenoviruses were detected more often in fresh water (381 adenovirus-positive samples out of 928, 41.1%, Fig. 3) than in marine water (132 out of 482, 27.4%). Conversely, noroviruses (either GI or GII or both)
50
% positive of 1410 samples
2.12. Quality assurance e robustness of the concentration and detection methods
40
30 553
20
samples samples positive positive
513
10 132
0
49
All viruses %
HAdV %
All NoV %
NoV GI %
88
NoV GII %
Fig. 2 e Summary of virus detection in all water types.
1032
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 2 5 e1 0 3 8
were detected less often in freshwater samples (58 noroviruspositive samples out of 928, 6.3%) than in marine water (79 out of 482, 16.4%, Fig. 3). Further, in marine waters the detection rate of norovirus GI was almost as high as norovirus GII (7.9% compared with 8.5%), which differs from the clinical context where GI viruses are found much less frequently than GII types in patients from gastroenteritis outbreaks, even in surveys of unaffected individuals (e.g. Verhoef et al., 2009). However, these high GI detection rates were mainly due to just four sites having higher frequencies of NoV GI.
3.3.
Variation according to site
Virus occurrence ranged widely between sites. Some Laboratories reported no viruses at all in any sample while others found many samples positive for at least one virus. Human adenoviruses were detected in all except two sites, one marine and one fresh water. Sites were chosen on the basis of their recreational use, and most were impacted by sewage effluent. Among the marine sites, 55% of samples from Pomezia, Rome, were positive for HAdV, while none was found at one of the Barcelona sites (though more samples were positive at the second site), and none was detected at Larnaca, Cyprus, where it is known no sewage is discharged. Among the freshwater sites, no HAdV was found at Kirchentellinsfurt Lake in BadenWu¨rttemberg, while 80% of samples were HAdV-positive at Amper Grasslfing in Bavaria and 91% were positive at the site at Tomblaine, Nancy, a site well recognised for its anthropogenic effects as well as its recreational activities (mainly canoeing). With respect to noroviruses, five out of 11 marine water sites, and four out of 13 freshwater sites gave samples positive for GI noroviruses, the highest recovery from a marine site being 30% of samples positive at Pomezia (Rome), and that from a freshwater site being 10% of samples positive at Reading. Genogroup II noroviruses were detected at eight marine and eight freshwater sites, the highest frequencies being 16.3% positive samples at Ardea (Rome, marine), and 15% at Durgerdam (freshwater). Overall, the data showed that adenoviruses were present at more sites than noroviruses. Some sites had more than 25% samples virus-positive in respect of both adenoviruses and noroviruses. To illustrate
3.4.
Virus infectivity by ICC-PCR
From each Laboratory, at least 10 samples that gave a strong HAdV-positive signal by nested PCR were analysed further by inoculation into cell culture and analysis of the supernatants by PCR. Fifty-one of 482 marine sample concentrates and 226 of 928 freshwater sample concentrates were tested. The results are shown in Table 2. Twenty-four (47%) of the marine water samples were found to be positive by nested PCR following inoculation of A549 cell cultures and where uninoculated control cultures remained negative, and where cultures inoculated and sampled immediately after inoculation also remained negative. Forty-six (20%) freshwater samples were positive for infectious HAdV.
3.5.
QPCR assay for the detection of HAdV DNA
A total of 132 marine and freshwater samples which had previously tested HAdV-positive by nested-PCR were further
14 12
Number of sites
Fig. 3 e Adenovirus and norovirus detection in marine and fresh waters.
the distribution of sites relative to the frequency of virus detection, Fig. 4 (marine sites) and Fig. 5 (freshwater sites) show the frequencies of positive samples divided into five groups (0%, 1e25%, 26e50%, 51e75% and 76e100% positive samples) plotted against the number of sites in each group. Thus there was, for example, one of the 11 marine sites which reported no samples being HAdV-positive, five sites in which between 1% and 25% samples were HAdV-positive, three sites between 26% and 50% and two sites with between 51% and 75% HAdV-positive (Fig. 4). There were several sites where the adenovirus frequency was in the higher categories and two freshwater sites where over 76% samples were HAdV-positive. Examination of the marine water norovirus GI data, when divided according to sites, shows that almost all the norovirus GI-positive samples (37/38) were found in four sites in Italy, the only other norovirus GI-positive marine water sample being found in one of the sites in Portugal. There was no evidence of outbreaks of norovirus-related disease in Italy in the areas local to the detection of GI virus in the environmental samples at the time when the samples were taken.
10
HAdV NoV GI
8
NoV GII
6 4 2 0 0%
1-25%
26-50%
51-75%
76-100%
% positive samples
Fig. 4 e Distribution of virus-positive sites e marine. Frequencies of positive samples divided into five groups (0%, 1e25%, 26e50%, 51e75% and 76e100% samples positive) plotted against the number of sites in each group.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 2 5 e1 0 3 8
3.7.
14
1033
Relationship of virus frequency to faecal indicators
Number of sites
12 10
HAdV NoV GI NoV GII
8 6 4 2 0 0%
1-25%
26-50%
51-75%
76-100%
% positive samples
Fig. 5 e Distribution of virus-positive sites e fresh water. Frequencies of positive samples divided into five groups (0%, 1e25%, 26e50%, 51e75% and 76e100% samples positive) plotted against the number of sites in each group.
analysed by the QPCR assay of Hernroth et al. (2002). Eighty (60.6%) samples were positive, with a mean value of 3260 genome copies (GC)/L of water. The percentage of positive samples was similar in both types of recreational water; 61.3% positive for fresh water with mean GC values of 558 GC/L versus 58.6% positive for marine waters with mean concentrations of 8810 GC/L.
3.6. Analysis of the sequence of the PCR products obtained Fifty-three samples were further analysed to type the HAdV present. The most frequently detected HAdV serotypes were 12 (n ¼ 4), 31 (n ¼ 8), 40 (n ¼ 4) and 41 (n ¼ 22). Serotypes 1 and 19 were observed with lower frequency. Serotypes 1, 2, 3, 12, and 31 were observed after analysing 7 samples which had been cultured in A549 cells as part of the infectivity detections. Nineteen samples were studied for determining NoV genotypes. Fifteen were confirmed as GII, with seven of them being GII.4. Four were GI, with one being GI.2. Over the last few years the most newly emerging NoV strains belong to GII.4 and show a global presence (Bull et al., 2006; Rowena et al., 2006).
Table 2 e Adenovirus infectivity over all sampling sites.
Marine (51 tested)
Fresh (226 tested)
T¼0
T¼5
Number of samples
% of those tested
e* e þ þ e e þ þ
e þ e þ e þ e þ
15 24 0 12 169 46 2 9
29 47 0 24 75 20 1 4
* Nested-PCR test result on cell culture after zero (T ¼ 0) or five (T ¼ 5) days’ incubation.
Frequencies of virus-positive samples were compared with the threshold values for E. coli and intestinal enterococci defining “good” water quality in the rBWD. The levels specified in the Directive for E. coli are 500/100 mL (coastal/transitional waters) and 1000/100 mL (inland waters), and the corresponding values for intestinal enterococci are 200/100 mL (coastal/transitional waters) and 400/100 mL (inland waters). Matching E. coli and intestinal enterococci data were available for 193 adenovirus-positive samples of which 117 (60.6%) had E. coli concentrations below the thresholds for “good” water quality whilst 151 (78.2%) had intestinal enterococci concentrations below the “good” water quality thresholds. For norovirus, matching E. coli and intestinal enterococci data were available for 52 positive samples, and the E. coli concentration in 31 (59.6%) of these was below the rBWD thresholds for “good” water quality. For intestinal enterococci, 38 (73.1%) norovirus-positive samples had concentrations below the “good” water quality thresholds. These results demonstrate the presence of PCR-detected virus in samples that would be considered “clean”, and of low illness risk, in terms of their faecal indicator organism concentration.
3.8.
Robustness of virus detection methods
The results of the robustness calculations of the virus/water detection methods are shown in Table 3. With the adenovirus/ freshwater method the trial sensitivity, or percentage of correctly identified positive samples, was 77.2%, and the concordance was lower than the accordance. A value of 1.0 lies just outside the COR 95% confidence intervals (CI), indicating that the method was not quite as reproducible as repeatable. The trial specificity, or percentage of correctly identified negative samples, was 96.1%, and 1.0 fell within the COR 95% CI, indicating that with identification of negative samples the method was as reproducible as it was repeatable. With the adenovirus/seawater method the trial sensitivity was 89.3%, and the concordance was lower than the accordance. Again, 1.0 lies just outside the COR 95% confidence intervals (CI). The trial specificity was 99.2%, and 1.0 fell within the COR 95% CI. With the norovirus/freshwater method the trial sensitivity was 91.4%, and the concordance was lower than the accordance, 1.0 lying just outside the COR 95% confidence intervals (CI). The trial specificity was 96.1%, and 1.0 fell within the COR 95% CI. With the norovirus/seawater method the trial sensitivity was 91.7%, and 1.0 fell within the COR 95% CI. The trial specificity was 92.6%, and 1.0 fell within the COR 95% CI.
4.
Discussion
This study has shown clearly that it is possible to use relatively straightforward methods for the detection of two important enteric viruses in water samples across a range of geographical sites with varying degrees of pollution. The common occurrence of adenoviruses (36.4% of samples tested) reflected the intermittent shedding of these viruses in the faeces by most adults. The difference in
1034
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 2 5 e1 0 3 8
Table 3 e Statistical evaluation of methods for virus detection from recreational waters. Method A
Adenovirus/freshwater
B
Adenovirus/seawater
C
Norovirus/freshwater
D
Norovirus/seawater
Sample type
Sensitivity (%)
Specificity (%)
Positive Negative Positive Negative Positive Negative Positive Negative
77.2 N/A 89.3 N/A 91.4 N/A 91.7 N/A
N/A 96.1 N/A 99.2 N/A 96.1 N/A 92.6
(71.3e82.1)* (82.5e93.6) (87.1e94.3) (85.5e95.5)
(92.8e98.0) (95.5e99.9) (92.8e98) (86.5e96.0)
Accordance (%) 73.9 93.0 85.9 98.6 86.2 92.9 85.3 88.0
(61.2e86.5) (85.2e100) (68.9e94.9) (97.4e100) (74.4e96.1) (87e97.7) (75.6e94.9) (70.8e100)
Concordance (%) 63.5 (50.9e81.7) 92.5 (84.8e100) 79.6 (66.1e92.7) 98.3 (94.6e100) 83.9 (71.9e95.7) 92.5 (86.8e97.5) 84.6 (75.3e94.9) 85.7 (70.1e100)
COR 1.63 1.08 1.57 1.25 1.2 1.06 1.05 1.22
(1.07e2.52) (1.00e1.16) (1.01e2.29) (0.97e1.44) (1.02e1.35) (0.97e1.14) (0.81e1.38) (0.92e2.18)
*Numbers in parentheses indicate lower and upper 95% confidence intervals.
detection frequency may have been due to the greater dispersing and diluting power of the sea compared with that of the fresh waters. Alternatively, viruses may be less stable in marine waters due to the higher salt content, especially with higher temperatures (Hawley and Garver, 2008; Lo et al., 1976). The frequent detection of HAdVs by most laboratories reflected their known environmental robustness; though it was not possible to perform ICC-PCR on all the adenovirus-positive samples and thus show that all contained infectious viruses, it is known that adenoviruses can persist in an infectious state in various environments over long periods (Rzezutka and Cook, 2004). Charles et al. (2009) found a strong relation between PCR detection and infectivity of adenovirus Type 2 in groundwater over one year. Although noroviruses are spread principally by person-toperson transmission, environmental spread is also important, for instance in outbreaks associated involving drinking water (e.g. Hewitt et al., 2007) and consumption of bivalve molluscs (Lees, 2000). In this study, the high frequency of NoV GI detection in two Laboratories suggests a higher level in the environment than was demonstrated by consideration of the rest of the data for this virus. Detection of GI noroviruses in the environment is not matched by their detection in clinical samples; GI NoV strains have been detected frequently in sewage, effluent, and surface waters (da Silva et al., 2007; Katayama et al., 2008; Myrmel et al., 2006), which contributes to the view that many norovirus infections are symptomless, with GI viruses being under-represented among those found in clinical cases. It is unclear whether this relates to our data as most of the GI isolates were found in only four sites. The frequency of GII norovirus detection (approximately 6%) was as expected. It is commonly accepted that norovirusrelated disease shows a seasonal trend, with most outbreaks and sporadic cases occurring in winter. Whilst it would have been interesting to obtain a temporal distribution of environmental norovirus detection similar to that of Nordgren et al. (2009), this was not feasible in this study since it was specifically planned to be related to the EU bathing season, and in any case RT-PCR detection might not have provided resolution high enough to show temporal differences in norovirus levels. Further studies are planned using a norovirus QPCR to investigate this aspect. The performance characteristics of the methods used for concentration and detection of HAdV and NoV in both fresh and marine water samples were determined. Recovery values of 49% (seeded fresh water) and 37% (seeded artificial sea water) were considered acceptable, though variations
between laboratories prevented direct statistical comparisons of performance, and a modified method for marine water samples was developed during the project (Calgua et al., 2008). The percentage of correctly identified positive samples was around 90%, except for HAdV in freshwater, which showed a sensitivity of 77%, while the specificity of the methods was shown to be 93% or more. The sensitivity and specificity values compare well with those of some PCR-based methods for foodborne pathogen detection (Abdulmawjood et al., 2004; Malorny et al., 2004). The lower sensitivity value of the adenovirus/freshwater may be due to the fact that the HAdV concentration in the seeded sample was lower than the NoV concentration used. This may also explain the higher COR values for the HAdV-positive marine and freshwater samples. Furthermore, it should be noted that the samples used for the QC were not actually identical, whereas for the COR estimation this would be preferred. Each participant used the water from their own site(s), and this would differ from site to site and from week to week. River water, particularly, will contain varying levels of material that may reduce the effectiveness of the concentration method and/or inhibit the molecular assays. Notwithstanding this, the results demonstrate that the methods used are robust, although currently no criteria exist on lower limits of acceptability for robustness of methods for detection of viruses in water. The theoretical limit of detection of the method reported here can be estimated. If an (RT)PCR signal was obtained from an undiluted nucleic acid extract, and the assumption is made that the assay could detect one target molecule, this signifies that there was one virus equivalent in 10 mL nucleic acid extract. There were thus 10 virus equivalents in 100 mL nucleic acid extract, and on the assumption that this extract was obtained from 5 mL concentrate with no loss of target nucleic acid, this implies that there were 20 virus particles in the 10 mL concentrate. Assuming that the concentrate was derived from the original sample with no loss of virus, the conclusion is that a signal from the neat extract indicates that there were at least 20 virus particles in the 10-L water sample. If the extract had to be diluted to 101, then there were 200 virus particles in the 10-L sample. In selecting methods for concentration and detection of the target viruses practical and cost factors were considered in addition to recovery efficiency. Concentration by glass wool filtration is inexpensive requiring no specialised equipment beyond a centrifuge capable of 7000 g, and running costs are minimal. Membrane filtration is slightly more expensive, requiring a filtration stand, but again, running costs are low.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 2 5 e1 0 3 8
Both approaches contrast with (for example) ultrafiltration (high costs of filtration units and pumps, or disposable cartridges) and ultracentrifugation, which is unlikely to be found in routine environmental virology laboratories. The time taken to process samples was also an important factor; using the selected methods it was possible to process up to eight samples in one day (including controls) following familiarisation with the method. For detection, cell culture was not considered for the surveillance stage, being too slow, expensive and requiring specialised facilities; the costs and labour time spent on molecular detection was as might be expected in any laboratory equipped for PCR and related techniques. The amount of sewage discharged in the vicinity of many of the sites studied will affect the likelihood of human viruses being present in the water. Sewage input was not measured directly but the level of faecal indicators found reflects the contamination level. Viruses were found less often in sites where the sewage input was expected to be lower. The influence of organic contaminants that occur naturally in water must not be underestimated. Reaction inhibition by substances in the sample is a well-known problem associated with analysis of environmental samples (e.g. da Silva et al., 2007), and was observed in this study. The use of the IACs in both NoV and HAdV PCRs was of significant benefit in guarding against false negative reactions. In the current study the norovirus RT-PCR suffered about 5.5% of reactions failing to give a conclusive result (4.4% of freshwater samples and 7.7% of marine samples). Samples were tested at a higher dilution (up to 103) to remove inhibition and achieve a positive IAC signal. Successive dilutions were done when a higher concentration failed to give a target signal or an IAC signal. Inhibition of the adenovirus PCR was much less problematic, with PCR reactions of 0.9% of freshwater samples and 5.6% of marine water samples being inhibited. Samples from one inland major river site (Kew Bridge, UK) had often to be diluted up to 103 and consequently unexpectedly low numbers of samples positive for adenovirus (23%) were recorded. Subsequent tests with bovine serum albumin (BSA) in the PCR reaction suggest that routine incorporation of this reagent in the reaction mix may reduce enzymatic inhibition. Integrated cell culture-PCR provided a method of determining the infectivity of adenoviruses, which was particularly useful since naturally-occurring virus strains do not always grow in cell culture with the same rapidity nor with the same evidence of cellular destruction. The enteric Ad40 and Ad41 viruses cannot be grown in most cell culture systems that support the growth of adenoviruses from the other subgroups, A549, HeLa, primary human amnion and primary human embryo kidney cells (Tiemessen and Kidd, 1995). They have been shown to replicate in cell culture systems using Graham 293 cells, HEp-2 cells and HT-29 cells (Ko et al., 2003; Tiemessen and Kidd, 1995). Our data support these findings, because the presence of both Ad40 and Ad41 was shown by direct PCR, not in the cell culture-PCR assay using A549 cells. Direct inoculation of cell cultures followed by observation over an extended period would not provide a good indication of infectivity and would not be in the interests of providing a rapid test. The finding that about 20% of freshwater samples and about 47% of marine water samples contained infectious
1035
adenovirus supports laboratory observations (e.g. ThurstonEnriquez et al., 2003) that these agents are environmentally robust. The FIO levels encountered in this project exhibited a wide range. Comparisons with FIO thresholds defined in the current European Directive bathing water standards (2006/7/ EC) suggest that over 50% of samples that are relatively clean in terms of FIO concentrations and which exhibit “good” water quality, with a low associated illness risk, can be positive for adenovirus and norovirus. However, use of an adenovirus PCR, for example, as a means of determining recreational water quality would require the use of quantitative, rather than presence/absence detection. Quantitative PCRs for different types of environmental adenovirus are now available. Whether such a test would detect infectious virus may be addressed by, for example, detection of virus-specific mRNA, and also there is some evidence that in adenovirus preparations from which free DNA has been removed before analysis virus titres measured by infectivity and by QPCR are very similar (Girone`s, personal communication). It would then be necessary to determine any association between adenovirus levels and health risk, and there is thus a need for further work before the viral parameters investigated here could be used in a regulatory framework prior to epidemiological investigation to provide an appropriate evidence-base for policy development.
5.
Conclusions
A comprehensive surveillance study of EU recreational waters was done through the 2006 bathing season. It may be concluded from the results that: 1. Almost 40% of bathing water samples in Europe were viruspositive entailing a possible public health risk from bathing; 2. Adenoviruses are more prevalent than noroviruses in both marine and fresh waters and appear to be a promising viral indicator for bathing water quality; 3. A single concentration method can be used to concentrate adenoviruses and noroviruses in fresh water recreational samples and a further single method can be used for marine waters; 4. Concentration and detection methods may be used effectively even in polluted waters; 5. Though the majority of sites returned frequencies of 0e25% positive, some were so polluted that >50% of samples contained one or both target viruses; 6. Adenoviruses remain infectious in the environment, and this may be true for other pathogenic viruses such as noroviruses.
6.
The ‘Virobathe’ group
This work was performed by scientists and technicians from 16 Institutions across Europe. In addition to the Authors of this paper, those making significant contributions were as follows:
1036
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 2 5 e1 0 3 8
Dr. Silvia Bofill-Mash, Ms. Pilar Clementeh, Dr. Donia Domenicad, Ms. Alexandra Duarten, Dr. Inge Gra¨berl, Dr. Wafa Hollisterp, Ms. Stephanie Huberi, Dr. Marcello Iaconellim, Dr. Giuseppina La Rosam, Prof. Beata Cuvelierk, Ms. Leslie Orgorzalyf, Dr. Nicholas Pissarides, Dr. Gabrieli Rosannad, Ms. Elyne Salagnonc, Dr. Oliver Schneidere, Ms. Arieke Docters van Leeuwenj, Dr. Marco Veranib, and Mr. Steve Wildeg.
Acknowledgements This work was funded by an EU contract number 513648 VIROBATHE, as part of the Sixth Framework Programme. The authors are grateful to Dr. Jan Vinje´ for helpful comments on the manuscript.
references
Abdulmawjood, A., Bu¨lte, M., Roth, S., Scho¨nenbru¨cher, H., Cook, N., Heuvelink, A.E., Hoorfar, J., 2004. Development, validation, and standardization of polymerase chain reactionbased detection of E. coli O157. Journal of AOAC International 87 (3), 596e603. Allard, A., Albinsson, B., Wadell, G., 2001. Rapid typing of human adenoviruses by a general PCR combined with restriction endonuclease analysis. Journal of Clinical Microbiology 39, 498e505. Bucardo, F., Karlsson, B., Nordgren, J., Paniagua, M., Gonza´lez, A., Amador, J.J., Espinoza, F., Svensson, L., 2007. Mutated G4P[8] rotavirus associated with a nationwide outbreak of gastroenteritis in Nicaragua in 2005. Journal of Clinical Microbiology 45 (3), 990e997. Bull, R.A., Tu, E.T., McIver, C.J., Rawlinson, W.D., White, P.A., 2006. Emergence of a new norovirus genotype II.4 variant associated with global outbreaks of gastroenteritis. Journal of Clinical Microbiology 44 (2), 327e333. Calgua, B., Mengewein, A., Grunert, A., Bofill-Mas, S., ClementeCasares, P., Hundesa, A., Wyn-Jones, A.P., Lo´pez-Pila, J.M., Girones, R., 2008. Development and application of a one-step low cost procedure to concentrate viruses from seawater samples. Journal of Virological Methods 153, 79e83. CEU, 2006. Directive 2006/7/EC of the European Parliament and of the Council of 15 February 2006 concerning the management of bathing water quality and repealing Directive 76/160/EEC. Charles, K.J., Shore, J., Sellwood, J., Laverick, M., Hart, A., Pedley, S., 2009. Assessment of the stability of human viruses and coliphage in groundwater by PCR and infectivity methods. Journal of Applied Microbiology 106, 1827e1837. Contreras-Coll, N., Lucena, F., Mooijman, K., Havelaar, A., Pierz, V. , Boque, M., Gawler, A., Ho¨ller, C., Lambiri, M., Mirolo, G., Moreno, B., Niemi, M., Sommer, R., Valentin, B., Wiedenmann, A., Young, V., Jofre, J., 2002. Occurrence and levels of indicator bacteriophages in bathing waters throughout Europe. Water Research 36 (20), 4963e4974. da Silva, A.K., le Saux, J.-C., Parnaudeau, S., Pommepuy, M., Elimelech, M., le Guyader, F.S., 2007. Evaluation of removal of noroviruses during wastewater treatment using real-time reverse transcription-PCR: different behaviors of genogroups I and II. Applied and Environmental Microbiology 73 (24), 7891e7897. Davison, A.C., Hinckley, D.V., 1997. Bootstrap Methods and Their Application. Cambridge University Press, Cambridge, UK.
de Roda Husman, A.M., Lodder, W.J., Rutjes, S.A., Schijven, J.F., Teunis, P.F., 2009. Long-term inactivation study of three enteroviruses in artificial surface and groundwaters using PCR and cell culture. Applied and Environmental Microbiology 75 (4), 1050e1057. Ding, Y., He, L., Zhang, Q., Huang, Z., Che, X., Hou, J., Wang, H., Shen, H., Qiu, L., Li, Z., Geng, J., Cai, J., Han, H., Li, X., Kang, W., Weng, D., Liang, P., Jiang, S., 2004. Organ distribution of severe acute respiratory syndrome (SARS) associated coronavirus (SARS-CoV) in SARS patients: implications for pathogenesis and virus transmission pathways. Journal of Pathology 203 (2), 622e630. Dubrou, S., Kopecka, H., Lopez-Pila, J.M., Marechal, J., Prevot, J., 1991. Detection of hepatitis A virus and other enteroviruses in wastewater and surface water samples by gene probe assay. Water Science and Technology 24 (2), 267e272. Enriquez, C.E., Hurst, C.J., Gerba, C.P., 1995. Survival of the enteric adenoviruses 40 and 41 in tap, sea and wastewater. Water Research 29, 2548e2553. Farrah, S.R., Bitton, G., 1990. In: Jean-Marc, Bollag, Stotzky, Arthur Douglas, Peterson, G., George, H. (Eds.), Soil Biochemistry, vol. 6. CRC Press, ISBN 0824782321. Gerba, C.P., Goyal, S.M., LaBelle, R.L., Cech, I., Bodgan, G.F., 1979. Failure of indicator bacteria to reflect the occurrence of enteroviruses in marine waters. American Journal of Public Health 69, 1116e1119. Gray, J.J., Green, J., Gallimore, C., Lee, J.V., Neal, K., Brown, D.W.G., 1997. Mixed genotype SRSV infections among a party of canoeists exposed to contaminated recreational water. Journal of Medical Virology 52, 425e429. Greening, G.E., Hewitt, J., Lewis, G.D., 2002. Evaluation of integrated cell culture-PCR (ICC-PCR) for virological analysis of environmental samples. Journal of Applied Microbiology 93 (5), 745e750. Harley, D., Harrower, B., Lyon, M., Dick, A., 2001. A primary school outbreak of pharyngoconjunctival fever caused by adenovirus type 3. Communicable Diseases Intelligence 25 (1), 9e12. Hauri, A.M., Schimmelpfennig, M., Walter-Domes, M., Letz, A., Diedrich, S., Lopez-Pila, J., Schreier, E., 2005. An outbreak of viral meningitis associated with a public swimming pond. Epidemiology and Infection 133 (2), 291e298. Hawley, L.M., Garver, K.A., 2008. Stability of viral hemorrhagic septicemia virus (VHSV) in freshwater and seawater at various temperatures. Diseases of Aquatic Organisms 82, 171e178. Hernroth, B.E., Conden-Hansson, A.C., Rehnstam-Holm, A.S., Girones, R., Allard, A.K., 2002. Environmental factors influencing human viral pathogens and their potential indicator organisms in the blue mussel, Mytilus edulis: the first Scandinavian report. Applied and Environmental Microbiology 68 (9), 4523e4533. Hewitt, J., Bell, D., Simmons, G.C., Rivera-Aban, M., Wolf, S., Greening, G., 2007. Gastroenteritis outbreak caused by waterborne norovirus at a New Zealand ski resort. Applied and Environmental Microbiology 73, 7853e7857. Hoebe, C.J.P.A., Vennema, H., de Roda Husman, A.M., van Duynhoven, Y.T.H.P., 2004. Norovirus outbreak among primary schoolchildren who had played in a recreational water fountain. Journal of Infectious Diseases 189, 699e705. Hundesa, A., Maluquer de Motes, C., Bofill-Mas, S., AlbinanaGimenez, N., Girones, R., 2006. Identification of human and animal adenoviruses and polyomaviruses for determination of sources of fecal contamination in the environment. Applied and Environmental Microbiology 72, 7886e7893. Iijima, Y., Tanaka, S., Ohishi, H., 2008. Multiple outbreaks of gastroenteritis due to a single strain of genotype GII/4 norovirus in Kobe, Japan: risk factors for norovirus spread in health care settings. Japanese Journal of Infectious Diseases 61 (5), 419e422.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 2 5 e1 0 3 8
Katayama, H., Haramoto, E., Oguma, K., Yamashita, H., Tajima, A. , Nakajima, H., Ohgaki, S., 2008. One-year monthly quantitative survey of noroviruses, enteroviruses, and adenoviruses in wastewater collected from six plants in Japan. Water Research 42, 1441e1448. Kay, D., Fleisher, J.M., Salmon, R.L., Jones, F., Wyer, M.D., Godfree, A.F., Zelenauch-Jacquotte, Z., Shore, R., 1994. Predicting the likelihood of gastroenteritis from sea bathing e results from randomized exposure. The Lancet 344 (8927), 905e909. Kay, D., Bartram, J., Pru¨ss, A., Ashbolt, N., Wyer, M.D., Fleisher, J. M., Fewtrell, L., Rogers, A., Rees, G., 2004. Derivation of numerical values for the World Health Organization guidelines for recreational waters. Water Research 38 (5), 1296e1304. Ko, G., Cromeans, T.L., Sobsey, M.D., 2003. Detection of infectious adenovirus in cell culture by mRNA reverse transcriptase-PCR. Applied and Environmental Microbiology 69, 7377e7384. Koopmans, M., von Bonsdorff, C.H., Vinje´, J., de Medici, D., Monroe, S., 2002. Foodborne viruses. FEMS Microbiology Reviews 26 (2), 187e205. Langton, S.D., Chevennement, R., Nagelkerke, N., Lombard, B., 2002. Analysing collaborative trials for qualitative microbiological methods: accordance and concordance. International Journal of Food Microbiology 79 (3), 175e181. Laverick, M.A., Wyn-Jones, A.P., Carter, M.J., 2004. Quantitative RT-PCR for the enumeration of noroviruses (Norwalk-like viruses) in water and sewage. Letters in Applied Microbiology 39, 127e136. Lee, C., Lee, S.H., Han, E., Kim, S.J., 2004. Use of cell culture-PCR assay based on combination of A549 and BGMK cell lines and molecular identification as a tool to monitor infectious adenoviruses and enteroviruses in river water. Applied and Environmental Microbiology 70, 6695e6705. Lees, D., 2000. Viruses and bivalve shellfish. International Journal of Food Microbiology 59 (1e2), 81e116. Lipp, E.K., Farrah, S.A., Rose, J.B., 2001. Assessment and impact of microbial fecal pollution and human enteric pathogens in a coastal community. Marine Pollution Bulletin 42, 286e329. Lo, S., Gilbert, J., Hetrick, F., 1976. Stability of human enteroviruses in estuarine and marine waters. Applied and Environmental Microbiology 32, 245e249. Malorny, B., Bunge, C., Hoorfar, J., Helmuth, R., 2003. Multicenter validation of the analytical accuracy of Salmonella PCR: towards an international standard. Applied and Environmental Microbiology 69, 290e296. Malorny, B., Cook, N., D’Agostino, M., de Medici, D., Croci, L., Abdulmawjood, A., Fach, P., Karpiskova, R., Aymerich, T., Kwaitek, K., Kuchta, T., Hoorfar, J., 2004. Multicenter collaborative trial validation of a PCR-based method for detection of Salmonella in chicken and pig samples. Journal of AOAC International 87, 861e866. Maunula, L., Kalso, S., von Bonsdorff, C.-H., Po¨nka¨, A., 2004. Wading pool water contaminated with both noroviruses and astroviruses as the source of a gastroenteritis outbreak. Epidemiology and Infection 132 (4), 737e743. Medema, G.J., van Asperen, I.A., Kokman-Houweling, J.M., Nooitgedagt, A., van de Laar, M.J.W., Havelaar, A.H., 1995. The relationship between health effects in triathletes and microbiological quality of freshwater. Water Science and Technology 31 (5e6), 19e26. Miagostovich, M.P., Ferreira, F.F., Guimara˜es, F.R., Fumian, T.M., Diniz-Mendes, L., Luz, S.L., Silva, L.A., Leite, J.P., 2008. Molecular detection and characterization of gastroenteritis viruses occurring naturally in the stream waters of Manaus, Central Amazonia, Brazil. Applied and Environmental Microbiology 74 (2), 375e382.
1037
Myrmel, M., Berg, E.M.M., Grinde, B., Rimstad, E., 2006. Enteric viruses in inlet and outlet samples from sewage treatment plants. Journal of Water and Health 4, 197e209. Nordgren, J., Matussek, A., Mattsson, A., Svensson, L., Lindgren, P.-E., 2009. Prevalence of norovirus and factors influencing virus concentrations during one year in a fullscale wastewater treatment plant. Water Research 43, 1117e1125. Nwachuku, N., Gerba, C.P., 2006. Health risks of enteric viral infections in children. Reviews of Environmental Contamination and Toxicology 186, 1e56. Papapetropolou, M., Vantarakis, A.C., 1995. Detection of adenovirus outbreak at a municipal swimming pool by nested PCR amplification. Journal of Infection 36, 101e103. Pina, S., Puig, M., Lucena, F., Jofre, J., Girones, R., 1998. Viral pollution in the environment and in shellfish: human adenovirus detection by PCR as an index of human viruses. Applied and Environmental Microbiology 64, 3376e3382. Reynolds, K.A., Gerba, C.P., Abbaszadegan, M., Pepper, I.L., 2001. ICC-PCR detection of enteroviruses and hepatitis A virus in environmental samples. Canadian Journal of Microbiology 47, 153e157. Rowena, A., Bull, Elise, Tu, T.V., McIver, Christopher J., Rawlinson, William D., White, Peter A., 2006. Emergence of a new norovirus genotype II.4 variant associated with global outbreaks of gastroenteritis. Journal of Clinical Microbiology 44 (2), 327e333. Rzezutka, A., Cook, N., 2004. Survival of human enteric viruses in the environment and food. FEMS Microbiology Reviews 28, 441e453. Sarguna, P., Rao, A., Sudha Ramana, K.N., 2007. Outbreak of acute viral hepatitis due to hepatitis E virus in Hyderabad. Indian Journal of Medical Microbiology 25 (4), 378e382. Scotter, S.L., Langton, S., Lombard, B., Lahellec, C., Schulten, S., Nagelkerke, N., in’t Veld, P.H., Rollier, P., 2001. Validation of ISO method 11290 part 2. Enumeration of Listeria monocytogenes in foods. International Journal of Food Microbiology 70 (1e2), 121e129. Sinclair, R.G., Jones, E.L., Gerba, C.P., 2009. Viruses in recreational water-borne disease outbreaks: a review. Journal of Applied Microbiology 107 (6), 1769e1780. Thurston-Enriquez, J.A., Haas, C.N., Jacangelo, J., Gerba, C.P., 2003. Inactivation of feline calicivirus and adenovirus type 40 by UV radiation. Applied and Environmental Microbiology 69, 577e582. Tiemessen, C.T., Kidd, A.H., 1995. The subgroup F adenoviruses. Journal of General Virology 76, 481e497. Vasl, R., Fattal, B., Katzenelson, E., Shuval, H., 1981. Survival of enteroviruses and bacterial indicator organisms in the sea. In: Goddard, M., Butler, M. (Eds.), Viruses and Wastewater Treatment. Pergamon Press, pp. 113e116. Vennema, H., de Bruin, E., Koopmans, M., 2002. Rational optimization of generic primers used for Norwalk-like virus detection by reverse transcriptase polymerase chain reaction. Journal of Clinical Virology 25 (2), 233e235. Verhoef, L.P., Kroneman, A., van Duynhoven, Y., Boshuizen, H., van Pelt, W., Koopmans, M., 2009. Foodborne viruses in Europe network. Selection tool for foodborne norovirus outbreaks. Emerging Infectious Diseases 15 (1), 31e38. Vilagine`s, P., Sarrette, B., Husson, G., Vilagine`s, R., 1993. Glass wool for virus concentration at ambient water pH level. Water Science and Technology 27, 299e306. WHO, 2003. Guidelines for Safe Recreational Water Environments Volume 1: Coastal and Freshwaters. World Health Organisation, Geneva, p. 219. Wiedenmann, A., Kru¨ger, P., Dietz, K., Lo´pez-Pila, J., Szewzyk, R., Botzenhart, K., 2006. A randomized controlled trial assessing
1038
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 2 5 e1 0 3 8
infectious disease risks from bathing in fresh recreational waters in relation to the concentration of Escherichia coli, intestinal enterococci, Clostridium perfringens and somatic coliphages. Environmental Health Perspectives 8115, 1e41. Wyn-Jones, A.P., Sellwood, J., 2001. Enteric viruses in the aquatic environment. Journal of Applied Microbiology 91, 945e962. Wyn-Jones, A.P., Pallin, R., Dedoussis, C., Shore, J., Sellwood, J., 2000. The detection of small round-structured viruses in water
and environmental materials. Journal of Virological Methods 87, 99e107. Zhang, Y., Tan, X.J., Wang, H.Y., Yan, D.M., Zhu, S.L., Wang, D.Y., Ji, F., Wang, X.J., Gao, Y.J., Chen, L., An, H.Q., Li, D.X., Wang, S. W., Xu, A.Q., Wang, Z.J., Xu, W.B., 2009. An outbreak of hand, foot, and mouth disease associated with subgenotype C4 of human enterovirus 71 in Shandong, China. Journal of Clinical Virology 44 (4), 262e267.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 3 9 e1 0 4 8
Available at www.sciencedirect.com
journal homepage: www.elsevier.com/locate/watres
Effect of selected metal ions on the photocatalytic degradation of bog lake water natural organic matter Luis A. Tercero Espinoza*, Eike ter Haseborg, Matthias Weber, Elly Karle, Rafael Peschke, Fritz H. Frimmel Water Chemistry, Engler-Bunte-Institut, Karlsruhe Institute of Technology, Engler-Bunte-Ring 1, 76131 Karlsruhe, Germany
article info
abstract
Article history:
Herein we report the photocatalytic degradation of natural organic matter from a bog lake
Received 11 April 2010
(Lake Hohloh, Black Forest, Germany) in the presence of 0, 5, and 10 mmol L1 of added Cu2þ,
Received in revised form
Mn2þ, Zn2þ and Fe3þ. The reactions were followed by size exclusion chromatography with
14 September 2010
organic carbon detection (SEC-DOC) and by measurements of low molecular weight organic
Accepted 13 October 2010
acids. Addition of Cu2þ had the largest effect of all four studied metals, leading to a retarda-
Available online 21 October 2010
tion in the molecular size changes in NOM: degradation of the larger molecular weight fraction was inhibited leading to reduced production of smaller molecular weight metabo-
Keywords:
lites. Similarly, addition of Cu2þ reduced the production of formic and oxalic acids, and
Heterogeneous photocatalysis
reduced the bioavailability of the partially degraded NOM.
Natural organic matter
ª 2010 Elsevier Ltd. All rights reserved.
Size exclusion chromatography Low molecular weight organic acids Degradation
1.
Introduction
Natural organic matter (NOM) is present in varying concentrations in all raw waters used for the production of drinking water. Its concentration is often reduced through flocculation and filtration prior to oxidation and disinfection. In spite of this, NOM is the principal natural precursor for unwanted byproducts in disinfection during water treatment (Frimmel et al., 2002; Zwiener, 2006). Thus, it is necessary to understand the behavior of NOM in established and alternative processes, especially those inducing chemical changes in the NOM. One alternative oxidation process with deployment potential in small, decentralized water treatment units is heterogeneous photocatalysis with titanium dioxide as the photocatalyst. This process is one of the so-called advanced oxidation processes
(AOP), the effectiveness of which is based largely on the oxidation potential of OH radicals (2.8 V vs. standard hydrogen electrode) and has been extensively demonstrated (Hoffmann et al., 1995; Kabra et al., 2004). The TiO2/UV process is particularly attractive for use in regions where the UV photons can be provided by sunlight. An overview of the work on solar heterogeneous photocatalysis is given by Malato et al. (2007). NOM is known to bleach and undergo changes in adsorption properties under photocatalysis with TiO2 suspensions (Bekbo¨let et al., 1996; Eggins et al., 1997) e for a recent review please see Matilainen and Sillanpa¨a¨ (2010). It was recently shown that aquatic NOM from a bog lake is progressively degraded in this process starting with the higher molecular weight fraction (Tercero Espinoza et al., 2009). Iterative calculations based on that experimental data show a cascade
* Corresponding author. Present address: Fraunhofer Institute for Systems and Innovation Research, Breslauer Str. 48, 76139 Karlsruhe, Germany. E-mail addresses:
[email protected] (L.A. Tercero Espinoza),
[email protected] (F.H. Frimmel). 0043-1354/$ e see front matter ª 2010 Elsevier Ltd. All rights reserved. doi:10.1016/j.watres.2010.10.013
1040
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 3 9 e1 0 4 8
in which NOM is progressively degraded and that this progression is different in homogeneous and heterogenous AOP (Tercero Espinoza and Frimmel, 2009). The work presented herein is a continuation of our efforts to characterize the photocatalytic degradation of NOM under simulated solar ultraviolet (UV) irradiation. Here we examine the effect of the presence of selected metal ions commonly found in natural waters, namely iron(III), manganese(II), copper(II) and zinc(II) on the photocatalytic degradation of NOM, taking into account changes in molecular size as measured by size exclusion chromatography with dissolved organic carbon detection (SEC-DOC), as well as the production of low molecular weight organic acids (LMWOA) and changes in the bioavailability of the DOC upon irradiation.
2.
Materials and methods
2.1.
Experiments without added metals
20 mg P25 (Degussa, Germany) was added to 40 mL of Lake Hohloh water (r(DOC) ¼ 21 mg L1) previously filtered with 0.45 mm cellulose acetate membrane filters and mixed. P25 is comprised of TiO2 (approx. 75% anatase and 25% rutile) nanoparticles with average particle diameter around 20e30 nm and a BET surface area of 50 15 m2 g1 (Doll and Frimmel, 2005, and manufacturer’s specifications). Lake Hohloh water was extensively described by Frimmel et al. (2002). Samples were sonicated for 10 min prior to irradiation. The samples were then placed in a solar UV simulator (Oriel Corp., Stratford, CT), where they were stirred, open to the atmosphere, and irradiated from above by a homogeneous light field. The estimated photon flow in the UV range (290 < l < 400 nm) was 1.4 107 mol s1 (polychromatic actinometry following Defoin et al., 1986). The sample volume was 40 mL in all experiments, with an irradiation pathlength of z3.5 cm.
2.2.
Experiments with added metals
Lake Hohloh water was mixed with an appropriate amount of CuSO4 or CuCl2$2H2O, FeCl3, ZnCl2, and MnCl2 solutions and let stand for a minimum of 3 days in the dark. This spiked water was used instead of the original lake Hohloh water in the procedure described in Section 2.1. In order to systematically explore the experimental region, we turned to a full factorial design for 4 variables in 2 levels (24 experimental runs), which comprise all possible combinations of the þ1 and
Table 1 e Variable settings for the 24 full factorial design. Variable
cadded(Cu2þ) cadded(Fe2þ) cadded(Zn2þ) cadded(Mn2þ)
Coded var.
x1 x2 x3 x4
Variable setting 1 (mmol L1)
0 (mmol L1)
þ1 (mmol L1)
0 0 0 0
5 5 5 5
10 10 10 10
Table 2 e Experimental matrix for the irradiation experiments with added metals. Each row represents one experimental run. The experimental runs were performed in random order. Runs with tirrad [ 30 min and those with tirrad [ 60 min were performed separately. cadded(Cu2þ) (mmol L1) 0 10 0 10 0 10 0 10 0 10 0 10 0 10 0 10 5 5 5
cadded(Fe3þ) (mmol L1)
cadded(Zn2þ) (mmol L1)
cadded(Mn2þ) (mmol L1)
0 0 10 10 0 0 10 10 0 0 10 10 0 0 10 10 5 5 5
0 0 0 0 10 10 10 10 0 0 0 0 10 10 10 10 5 5 5
0 0 0 0 0 0 0 0 10 10 10 10 10 10 10 10 5 5 5
1 levels shown in Table 1, plus repetitions of the “center point” (level “0” for all variables, see Box et al., 2005). The full experimental matrix is shown in Table 2.
2.3. Size exclusion chromatography with dissolved organic carbon detection (SEC-DOC) Filtered (0.45 mm) samples were analyzed using the apparatus described in detail by Huber and Frimmel (1991) using Toyopearl HW 50S resin (Tosoh Corp., Japan) as column packing and phosphate eluent (1.5 g L1 Na2HPO4$2H2O þ 2.5 g L1 KH2PO4) flowing at a rate of 1 mL min1 as the mobile phase. Samples were diluted 1:5 prior to analysis. The dimensions of the column were: length ¼ 250 mm, inner diameter ¼ 20 mm. The injection volume was 1 mL and the DOC concentration of each sample was calculated on the basis of an external calibration using potassium hydrogen phthalate as a standard. The resulting chromatograms were divided operationally into three fractions (cf. Tercero Espinoza et al., 2009), as follows: Fraction 1: 28.0 min < tr < 45.8 min, where tr is the retention time (in this case numerically equal to the elution volume in mL); the DOC contained in this fraction is commonly attributed to the relatively high molecular sized humic material (Huber et al., 1994), Fraction 2: 45.8 min < tr < 50.7 min; the DOC contained in this fraction is sometimes referred to as “building blocks”, representing medium sized molecules (Frimmel, 1998; Huber et al., 1994). Fraction 3: 50.7 min < tr < 56.5 min; this peak includes totally permeating molecules, as well as molecules which elute prematurely due to the difference in electrical conductivity between sample and buffer (Specht and Frimmel, 2000; Huber et al., 1994).
1041
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 3 9 e1 0 4 8
2.4.
Ion chromatography (IC)
KD
Measurements of total metal concentrations were performed by means of inductively coupled plasma-optical emission spectroscopy (ICP-OES) using a Vista-Pro CCD simultaneous ICP-OES spectrometer (Varian) with yttrium as an internal standard.
2.6. Degradation experiments with bacteria from activated sludge The biodegradability of the irradiated samples was assessed by performing SEC-DOC measurements of filtered samples after incubation with a mixed bacterial culture following Tercero Espinoza et al. (2009). Briefly, 4 mL of activated sludge inoculum (mixed from two wastewater treatment plants, one municipal and one industrial) were added to 50 mL of the irradiated samples, which were previously filtered to remove the TiO2 particles. The samples were then incubated in the dark on a shaker (70 rpm) for 48 h at 36 . The choice of bacterial cultures reflects the expectation that the mixed inoculum from two wastewater treatment plants possesses a larger bacterial diversity and a correspondingly larger metabolic potential compared e.g. to the “native” inoculum used by Brinkmann et al. (2003).
3.
Results and discussion
3.1.
Degradation of NOM in the absence of added metals
As a base case for later experiments with added Cu2þ, Mn2þ, Zn2þ and Fe3þ, we first performed irradiation experiments in the absence of added metals (Fig. 1). A further aim was to select an adequate time scale for the ensuing experiments with added metals. To this end, the SEC-DOC chromatograms of the original and irradiated samples were divided into three fractions based on retention time (tr) as described in Section 2.3. The fractions are presented graphically in Fig. 1, and are also referred to as F1eF3 in the following presentation and discussion. In good agreement with previous results (Tercero Espinoza et al., 2009), irradiation of the samples led to a rapid decrease in F1 (0.05 mg L1 min1), initially accompanied by an increase in F2 and F3, each at a rate approximately half that of decrease of F1. Therefore, the sum of the DOC contained in F1eF3 did not change appreciably during the first hour of irradiation but decreased steadily at longer irradiation time (tirrad), indicating mineralization of the NOM.
1.0
1.3
1.7
2. 0
0 min 60 min 120 min
1. 0
Relative DOC signal
2.5. Inductively coupled plasma-optical emission spectroscopy (ICP-OES)
0.7
Irrad. time
F1
0. 0
The determination of low molecular weight organic acids on filtered samples (0.45 mm) was performed by ion exchange chromatography (IC) using a Dionex DX500 system, equipped with an IonPacAS11 column (length 250 mm, inner diameter 4 mm) as described earlier (Tercero Espinoza et al., 2009). The eluent was aqueous KOH with concentrations shown in Table S1 in the supporting information.
0.3
3.0
0.0
20
30
40
F2 F3
50
60
70
80
t r / min
Fig. 1 e SEC-DOC chromatograms showing the defined fractions (F1eF3) and their time evolution under UV irradiation in the presence of 0.5 g LL1 TiO2. The DOC signal is directly proportional to the mass of organically bound carbon leaving the SEC column at retention time tr. Notice the marked shift in the chromatograms from left to right with increasing irradiation time, pointing to the progressive degradation of the NOM (for a more detailed discussion, see e.g. Tercero Espinoza et al., 2009; Tercero Espinoza and Frimmel, 2009).
Because F2 experienced a maximum in DOC content at tirrad z 60e90 min, we chose irradiation times of 30 and 60 min for the following experiments with added metals. See the supporting information for a plot of DOC content vs. tirrad for F1eF3 (Figure S1). Through this choice of tirrad (i.e. in the early stages of the reaction, before the maximum in F2) we aimed to avoid having to distinguish between values on either side of the UV (Figure S2) and DOC maxima for F2.
3.2. Degradation of NOM in the presence of added metals In order to study the influence of added metals on the photocatalytic degradation of NOM, we performed irradiation experiments with added iron(III), copper(II), manganese(II) and zinc(II) in the range 0e10 mmol L1. The original Lake Hohloh water contained 1 mmol L1 of each Cu and Mn, approx. 2 mmol L1 Zn, and approx. 6 mmol L1 Fe, as measured by ICP-OES. No steps were taken to change this natural background concentration. Thus, the concentration of the spiked samples is given as cadded(metal ion) instead of total concentration. As expected from the irradiation experiments without added metals (Section 3.1; cf. Tercero Espinoza et al., 2009), the DOC content of F1 decreased upon irradiation, and that of F2 and F3 increased with increasing tirrad. While more than half of the DOC initially contained in F1eF3 was present as F1, this fraction was reduced to approximately half after tirrad ¼ 30 min and less than half after tirrad ¼ 60 min. The sum of F1eF3 remained nearly constant. The results for all experiments containing added metals are summarily presented in Fig. 2. For comparison, the values
1042
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 3 9 e1 0 4 8
corresponding to the experimental runs without added metals are given at the bottom of the histograms (gray and black stubs). After tirrad ¼ 30 min, the DOC content of the sample without added metals (gray stub in Fig. 2, left panel) was close to the mean of all samples for F1 and F3. However, for F2, the DOC content of this sample was at the high end of the distribution, suggesting that the addition of metals led to a smaller F2. After tirrad ¼ 60 min, the value of the DOC content of the sample without metals (black stub in Fig. 2, left panel) was at the lower end of the distribution for F1, pointing to a retardation of the degradation of F1 in the presence of added metals. Congruently, this sample showed larger F2 and F3 (both close to the upper end of their respective distributions). Thus, addition of the selected metal ions appears to generally slow down the transformations of NOM in the direction F1 / F2 / F3 as observed after tirrad ¼ 60 min. This inhibitive effect may be related either to the presence of metal ions as scavengers of both electrons and OH radicals (Litter, 1999), or to the complexation of metal ions with NOM. These aspects are discussed in the following sections. It is interesting to note that not only the mean but also the shape of the histograms changes as the irradiation progresses, with peaks for the individual fractions apparently acquiring a more pronounced bimodal character after 60 min of irradiation than after 30 min, as seen in Fig. 2. For example, the mode of the DOC content of F1 after tirrad ¼ 30 min is between 5 and 5.5 mg L1. However, there are two modes visible after tirrad ¼ 60 min: one around 3.5e4.0 mg L1 and one around 4.5e5.0 mg L1. This suggests that the DOC content of these fractions, originally the same regardless of the added metals, splits into two distinct “groups” during the course of irradiation. These groups may in turn result from the action of one or more of the added metals. This aspect is explored below.
3.3.
DOC content of the individual fractions
In order to help quantify the effect of the added metals on the “internal” changes in the apparent molecular size distribution of the NOM samples, we fitted the polynomial model
y ¼ b0 þ b1 x1 þ b2 x2 þ b3 x3 þ b4 x4 |{z} |fflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflffl{zfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflffl} mean
main effects
þ b12 x1 x2 þ b13 x1 x3 þ . þ b34 x3 x4 |fflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflffl{zfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflffl} firstorder or twoway interaction effects
þ
b123 x1 x2 x3 þ . þ b234 x2 x3 x4 |fflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflffl{zfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflfflffl} secondorder or threeway interaction effects
þ
b1234 x1 x2 x3 x4 |fflfflfflfflfflfflfflfflfflffl{zfflfflfflfflfflfflfflfflfflffl} thirdorder or fourway interaction effect
to the data, where the subscripts 1e4 are defined in Table 1. We then analyzed the magnitude of the coefficients by using the techniques from Daniel (1959) and Lenth (1989) to identify the most important factors influencing the DOC content of each fraction.
3.3.1.
Fraction 1 (F1)
There was no clear effect of the added metals on the DOC content of F1 at tirrad ¼ 30 min (cf. Fig. 2, left panel). However, evaluation of the data after tirrad ¼ 60 min shows an effect of added Cu2þ. Plotting the results only as a function of cadded(Cu2þ) reveals that an increasing concentration of Cu2þ results in a larger DOC content of F1, indicating a retardation in the degradation of this fraction as compared to samples without added Cu2þ. For cadded(Cu2þ) ¼ 0 mmol L1, the DOC contained in F1 was 3.8 0.2 mg L1, while for cadded(Cu2þ) ¼ 10 mmol L1 it was 4.7 0.5 mg L1. These data are shown as box plots in Fig. 3, left panel. Note that the results in Fig. 3 are presented as if the other metals were not present. Therefore, the variability observed for cadded(Cu2þ) ¼ 0 and 10 mmol L1 also includes the variations caused by the presence/absence of the other three added metals. In spite of this, the difference observed for F1 in Fig. 3 between cadded(Cu2þ) ¼ 0 and at cadded(Cu2þ) ¼ 10 mmol L1 is statistically significant when considering a 99% confidence interval (CI) for the difference of means. The data at cadded(Cu2þ) ¼ 5 mmol L1 (center point) show the variability of true replicates of the same experiment (n ¼ 3). The experimental error associated with true replicate runs of a single experiment was, therefore, small when compared with the variability observed with cadded(Cu2þ) ¼ 0 and 10 mmol L1, indicating that
Irrad. time
30 min 60 min
F1
F2
F3
F1 + F2 + F3
2 2.5 3 3.5 4
1.5 2 2.5 3 3.5
10 Frequency
8 6 4 2 0 3
4
5
6
7
8
9
10 11 12
−1
DOC contained in fraction(s) / mg L
Fig. 2 e Frequency distribution of the DOC content of F1eF3 as a function of time (each data point corresponds to one experiment in Table 2). The gray and black stubs at the bottom of the histograms indicate the values corresponding to samples without added metals after 30 and 60 min of irradiation, respectively. Note the different bin sizes: 0.5 mg LL1 for F1 and F1 D F2 D F3 but 0.25 mg LL1 for F2 and F3.
1043
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 3 9 e1 0 4 8
F2
F3
5
4
3
2 0
5
10
0
5
c added(Cu
)
2+
10
0
5
10
−1
/ μmol L
Fig. 3 e Box plots showing the DOC content of F1, F2 and F3 after 60 min of irradiation. The box at cadded(Cu2D) [ 5 mmol LL1 (x1 [ 0) results from the repetitions at the center point (true replicate runs, n [ 3). Box plots (sometimes called box and whisker plots) summarily present all data in a distribution. The lower end of the bottom whisker in a box plot corresponds to the minimum of all observations while the top of the upper whisker represents the maximum. The bottom of the box represents the 25th percentile (1st quartile), the central line the median (50th percentile or 2nd quartile), and the top of the box the 75th percentile (3rd quartile) of the distribution (Lapin, 1997).
the influence of the other added metals on the degradation of F1, though small compared to that of Cu2þ, may not be negligible. The largest of these other influences was that of added Mn2þ. The change in DOC content with added Cu2þ was different in the absence and in the presence of added Mn2þ: rðDOCF1 Þx1 ¼þ1 rðDOCF1 Þx1 ¼1 ¼ 1:2 0:3 mg L1 for cadded (Mn2þ) ¼ 0 mmol L1 but only 0.6 0.4 mg L1 for cadded(Mn2þ) ¼ 10 mmol L1. Thus, the magnitude of the observed effect of added Cu2þ decreased with increasing cadded(Mn2þ) (first-order interaction effect). We note that the addition of Mn2þ alone did not have a significant effect on the DOC content of the fractions. Fig. 3 also reveals that the change in DOC content of F1 after 60 min of irradiation did not depend linearly on cadded(Cu2þ). Instead, it appears that already small amounts of added Cu2þ strongly retarded the degradation of F1, with the effect of cadded(Cu2þ) becoming smaller per mmol L1 as cadded(Cu2þ) increased. The presence of Cu2þ in NOM samples has been reported to interfere with wet chemical oxidation methods, such as the one used to quantify DOC in this study. In fact, using the same analytical system and the same water source,1 Brinkmann
(2003) reported reduced carbon recovery rates when adding Cu2þ at concentrations greater than 25 mmol L1. However, for c(Cu2þ) 10 mmol L1, no detection problems were observed. Furthermore, in our experiments, added Cu2þ led to higher DOC content of F1, indicating a retardation in the photocatalytic degradation of F1 rather than an inhibition in DOC detection as observed by Brinkmann (2003), which would have led to an erroneously lower value. Therefore, we rule out a biasing of our results due to systematic measurement error in the presence of added Cu(II) ions. Accordingly, we conclude that the effect of added Cu(II) ions is real and requires an explanation. Because the nature of the counterion ðSO2 4 Þ could play a role in the retarding effect observed for Cu2þ (Abdullah et al., 1990), control experiments were performed using Cl as a counterion 2þ and using SO2 4 in the absence of Cu . These results are shown in Fig. 4. Comparison of the original Lake Hohloh water with a sample spiked with 10 mmol L1 K2SO4 showed no difference between the samples, indicating that the presence of SO2 4 alone does not lead to a retardation of the photocatalytic degradation of NOM at this concentration. Furthermore, the effect of adding 10 mmol L1 CuSO4 or CuCl2$2H2O was essentially identical. Therefore, we conclude that the observed effect is due to the presence of the added Cu(II) ions. Different authors have reported the acceleration and inhibition of degradation reaction kinetics when copper(II) ions are added to titanium dioxide suspensions (e.g. Aarthi and Madras, 2007; Bideau et al., 1991; Cai et al., 2003; Chen et al., 2002; Lindner et al., 1997; Wang et al., 2007). The mechanisms proposed therein are based on the electron acceptor role of copper(II) ions for the conduction band electrons from the irradiated TiO2. This effect has been reported to be concentration dependent (Litter, 1999): at “low” concentrations (similar to those in the present study), the effect of added Cu(II) ions is often reported to be accelerating. This is explained by the ability of Cu(II) ions to
5 4 3 2 1 0 5 4 3 2 1 0
original
+ 10 μmol L−1 K2SO4
+ 10 μmol L−1 CuSO4
+ 10 μmol L−1 CuCl2
35 1
Water from Lake Hohloh exhibits moderate changes in DOC content depending on the sampling time and season. However, the quality of the NOM is essentially constant Abbt-Braun and Frimmel, (2002).
0 min 30 min 60 min
t irrad
Relative DOC signal / AU
DOC contained in fraction / mg L−1
F1
45
55
35
45
55
t r / min Fig. 4 e Control experiments for the inhibiting effect of added Cu2D.
1044
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 3 9 e1 0 4 8
accept electrons from the conduction band, thus inhibiting recombination. at “high” concentrations, the effect of added Cu(II) ions is generally inhibiting. This is attributed to the Cu(II) ions acting as scavengers for OH radicals. These two explanations require the Cu(II) ions to be free in solution. This is a reasonable assumption if the DOC present does not possess complexing moieties (e.g. phenol), as has been the case in most previous studies (Litter, 1999). However, NOM is known to have a high copper complexation capacity. Thus, the formation of NOMeCu2þ complexes may well play a key role in the inhibiting effect observed when adding Cu(II) ions to the TiO2 suspensions. Frimmel and Geywitz (1983) reported complexation capacities of isolated aquatic humic substances from different German lakes and rivers ranging from 1.8 to 6.8 mmol Cu per mg C, as measured by polarography. The complexation capacity of NOM is largely determined by the acidic functional groups present in it (Prado et al., 2006), although Cu2þ is known to be able to bind to both carboxylic and phenolic groups in humic substances (Martyniuk and Wieckowska, 2003). Lake Hohloh water has been shown to possess an acidic functional group in every 4e8th carbon (based on proton titration), with approximately every 10th of these functional groups being able to form stable bivalent metal complexes. Measurements of the copper complexation capacity of Lake Hohloh water yielded a value of z1.9 mmol Cu per mg C (Abbt-Braun and Frimmel, 2002). If all the added copper in our experiments was bound in complexes with the NOM, this would lead to (0:5 mmol Cu per mg C, a value well below the complexation capacity for this NOM. Thus, we expect most Cu2þ ions to be present as Cu2þeNOM complexes. While there is no literature information regarding the photocatalytic degradation of NOM in the presence of Cu(II) ions, indirect information on this process can be obtained from other advanced oxidation processes. Using the H2O2/UV process, Liao et al. (2001) report the inhibition of humic acid (HA) mineralization in the presence of added copper(II) ions, albeit at higher concentrations (40e60 mmol L1) than those used in this study. They proposed that HAecopper complexes are more resistant to attack by HO than HA alone. This would agree with the results presented in Fig. 3 (left panel). However, the experiments by Liao et al. (2001) are strongly convoluted with the radical scavenging effect of Cu2þ because the concentrations present in their experiments exceed by a factor of 5e8 the copper(II) complexation capacity of the humic acid used in those experiments (CCCu2þ ;AldrichHA z1 mmol per mg C; Kolokassidou et al., 2009). No other reports of the degradation of coppereNOM or coppereHA complexes by hydroxyl radicals are known to us. However, the complexing agent EDTA is known to be degraded more rapidly by HO (in the sonolysis process) than its copper complex (CueEDTA; Frim et al., 2003). Thus, it appears that a stabilization of the NOM by complexation is responsible for the inhibition in degradation observed in our experiments. This stabilization of the NOMeCu2þ complexes has practical consequences, such as a reduced formation of bromoform in bromide-containing waters (Tercero Espinoza et al., 2010). It is unclear how the addition of Mn2þ affects the effect of added Cu2þ. Uyguner and Bekbolet (2007) reported that the addition of Mn2þ ions did not significantly alter the degradation
kinetics of humic acids, in agreement with our results for the effect of added Mn2þ alone. However, the type of interaction described above has not yet been reported. A possibility would be, that the Cu2þ complexes are largely substituted by Mn2þ complexes. An analogous behavior was observed by Park et al. (2006) in the system EDTA-Cu2þ/Fe3þ, where the Cu2þ replaced the Fe3þ and changed the degradation kinetics accordingly. However, such a substitution is unlikely for the case NOM-Cu2þ/ Mn2þ because the stability of the Cu2þ complexes of humic and fulvic acids is approx. one order of magnitude higher than that of the corresponding Mn2þ complexes (Hirata, 1981). Cu2þ and Fe3þ generally bind more strongly to humic acids than Mn2þ and Zn2þ (Van Dijk, 1971). We stress, however, that complex stability and increased stability against attack by HO are not the same, as shown for example by the work of Madden et al. (1997) with EDTA complexes of several metal ions. Instead, the effect of complex formation on the degradation kinetics in irradiated TiO2 suspensions appears to depend both on the nature of the metal ion and on the nature of the complexing partner. For example, in the case of EDTA complexes, addition of Fe3þ and Zn2þ inhibit the photocatalytic degradation of the complexes to a much larger extent than addition of Cu2þ, although Cu2þ complexes of EDTA are more stable (Park et al., 2006; Madden et al., 1997). In our experiments, the formation of Cu2þ complexes was the dominating factor.
3.3.2.
Fraction 2 (F2)
Inspection of the fitted coefficients for Equation (1) applied to F2 after tirrad ¼ 30 min shows an influence of cadded(Cu2þ) and suggested small interaction effects between Cu2þ and Zn2þ as well as between Fe3þ and Mn2þ. After 60 min, the effect of added Cu2þ became more dominant. Plotting the DOC content of F2 as a function of only cadded(Cu2þ) reveals a strong, nonlinear dependence (Fig. 3, center panel). This dependence closely mirrored the one shown for F1. Thus, the finding that increasing concentrations of Cu2þ led to a lower DOC content of F2 is complimentary to the observation that adding Cu2þ led to a larger F1.
3.3.3.
Fraction 3 (F3)
Following the same procedure as above, we found a marked effect of added Cu2þ on the DOC content of F3 already after 30 min of irradiation. As already seen for F2, increasing cadded(Cu2þ) also led to a lower DOC content of F3. Analysis of the results after tirrad ¼ 60 min shows qualitatively the same results (shown in Fig. 3, right panel). Thus, the presence of the added metals, especially of copper, slows down the degradation and mineralization of NOM, apparently by stabilizing the high molecular weight material through complexation.
3.4. Formation of low molecular weight organic acids (LMWOA) We then investigated the formation of low molecular weight organic acids upon irradiation. The concentration of four out of six identified acids (formic, acetic, malonic, oxalic, succinic and glutaric acids) was quantified by using ion chromatography (IC). The quantified acids were formic, oxalic, succinic and glutaric acids.
1045
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 3 9 e1 0 4 8
Table 3 e Concentration after irradiation of the quantified low molecular weight organic acids (LMWOA). r (LMWOA), mg L1
LMWOA
Formic acid Oxalic acid Succinic acid Glutaric acid
0 min
30 min
60 min
0.3 0.2 0.1 0.1 <0.1 <0.1
0.8 0.3 0.4 0.2 0.1 0.0 <0.1
1.3 0.7 0.1 0.1
0.6 0.4 0.1 0.1
tirrad
30 min 60 min
1.5 (oxalic acid) / mg L−1
The measured concentrations of all four acids after tirrad ¼ 30 min and tirrad ¼ 60 min are summarized in Table 3. The acids were present in concentrations following the order: formic > oxalic [ succinic z glutaric acid. It is worth pointing out that the LMWOA are not only formed during the course of irradiation but can also be degraded by HO. Regarding the time evolution of the concentrations, we note that both the mean and the standard deviation increased with increasing irradiation time. The increase in mean concentration shows the steady production of these acids during irradiation, while the increase in standard deviation may result from an effect of the added metals. In order to explore the effect of the added metals, we employed the same techniques as above. These could be applied to both formic and oxalic acids but not to succinic and glutaric acids because the absolute amounts produced were too small. First, we note that the range of concentration of formic acid is not very large, spanning from 0.4 to 1.2 mg L1 after tirrad ¼ 30 min. Within this range, however, there were differences between the amounts produced at different levels of added metals. The largest of these was found in experiments with cadded(Mn2þ) ¼ 10 mmol L1. Here we observed a decrease in the concentration of formic acid with increasing cadded(Cu2þ), from 1.1 0.1 mg L1 at cadded(Cu2þ) ¼ 0 mmol L1 to 0.5 0.0 mg L1 at cadded(Cu2þ) ¼ 10 mmol L1 (significant, 99% CI). In contrast, there was no clear effect of added Cu2þ in the case of no added Mn2þ. This type of interaction effect is similar to that described for the DOC content of F1, but the “direction” of the interaction is exactly the opposite. Unfortunately, we cannot offer a plausible explanation for this at the present time. At tirrad ¼ 60 min, the same qualitative results were obtained as for tirrad ¼ 30 min. Quantitatively, the formic acid concentrations were approximately twice as high (0.8e2.3 mg L1) and the effect of added Cu2þ increased proportionately. In the case of oxalic acid, the largest effect was that of added Cu2þ, as shown in Fig. 5. After 30 min of irradiation, r(oxalic acid) ¼ 0.6 0.3 mg L1 in the absence of added Cu2þ but only 0.3 0.1 mg L1 when cadded(Cu2þ) ¼ 10 mmol L1. This difference is significant considering a 99% CI. The same trend is seen at a higher level after 60 min of irradiation. We note that the effect of added Cu2þ is not linear for both 30 and 60 min of irradiation. A small interaction effect observed for the addition of Mn2þ was not statistically significant. Thus, it is apparent that the main influence on the formation of both formic and oxalic acids came from the
1
0.5
0 0 μmol L−1
5 μmol L−1 10 μmol L−1 c added(Cu2+)
Fig. 5 e Box plots showing the concentration of oxalic acid after simulated solar irradiation of NOM in the presence of TiO2 and of added Cu2D.
addition of Cu2þ, and that this influence was negative with respect to LMWOA formation. A similar behavior regarding Cu2þ was found by Brinkmann et al. (2003) in bog lake water samples irradiated with simulated solar light in the absence of TiO2 (direct photolysis), but the addition of Mn2þ and/or Zn2þ was not considered in that work. In addition, an increase in production of LMWOA in the presence of added Fe3þ, as was the case for the direct photolysis of Lake Hohloh water NOM (Brinkmann et al., 2003; Brinkmann, 2003), was not observed in our experiments.
3.5.
Bioavailability of DOC in F1eF3
The irradiated samples were incubated with a bacterial culture for a period of two days in order to examine the bioavailability of the DOC after partial degradation (cf. Tercero Espinoza et al., 2009). SEC-DOC chromatograms revealed changes in all fractions, with F1 being larger after incubation compared to before incubation, and both F2 and F3 being smaller after incubation. These results are shown in Fig. 6. We attribute the increase in F1 to the synthesis of high molecular weight organic compounds by the bacteria (Wingender et al., 1999), and the decrease of F2 and F3 to the biological degradation of the bioavailable components present in these two fractions (cf. Brinkmann et al., 2003). We note that LMWOA (contained in F2 and F3) are generally more easily available for uptake and integration into the microbial metabolism than larger molecules. Addition of the metal ions led to changes in the amount of DOC degraded by the bacteria, in particular, addition of Cu2þ was observed to lead to lower amounts of DOC being biodegraded, as shown for F2 in Fig. 7. Although Cu2þ is necessary for bacterial life and growth in trace amounts, it is known to be toxic at higher concentrations (Trevors and Cotter, 1990; Lamb and Tollefson, 1973; Domek et al., 1984). Within the range of cadded(Cu2þ) used in this study, however, only a reversible
1046
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 3 9 e1 0 4 8
0.5 0.0 −0.5 −1.5
−1.0
ΔDOC / mg/L
1.0
1.5
3.6. acids
F1
F2
F3
Fig. 6 e Box plots showing the change in DOC content of F1eF3 for all irradiated samples (tirrad [ 60 min) after incubation with a mixed bacterial culture. The change in DOC is defined as DDOC [ DOCafter incubation L DOCbefore incubation.
inhibition (adaptation) of the added bacteria is to be expected (Trevors and Cotter, 1990). Furthermore, the inhibiting effect of Cu2þ in biological systems is observed when adding free Cu2þ, which then interacts with different biomolecules. In our case, the copper ions are initially complexed to the NOM, leaving a much lower effective concentration of free copper ions. Therefore, the observed effect cannot be explained by an inhibiting effect of the added Cu2þ on the bacteria. Instead, comparison of Fig. 7 with Fig. 3 reveals that the inhibition in the biodegradation mirrored the inhibition seen for the photocatalytic degradation of F1 to form F2 and F3: addition of Cu2þ leads to a lower DOC content of F2 and F3 so that there is less bioavailable DOC to be degraded by the bacteria in the subsequent incubation step.
Formic, succinic and glutaric acid were completely biodegraded after two days of incubation. The concentration of oxalic acid was reduced by 82 8% for tirrad ¼ 30 min and 87 10% for tirrad ¼ 60 min. Thus, the fraction of degraded oxalic acid was nearly constant although more oxalic acid was initially present before incubation in the case of tirrad ¼ 60 min. The difference in biodegradation between oxalic acid and formic, glutaric and succinic acids can be explained by their different functions in the bacterial metabolism. Formic acid is built up or utilized in several metabolic pathways present in many different microorganisms such that a direct use of formic acid is to be expected (Gra¨ntzdo¨rffer, 2000). Similarly, succinic acid is used directly in the citric acid cycle (Bailey and Ollis, 1986) and glutaric acid plays an important role in amino acid degradation. The glutaric acid is converted to acetyl coenzyme A that could be directly used in the citric acid cycle or for the build-up of fatty acids (e.g. Griffin and Trudgill, 1972). In contrast, oxalic acid is in many organisms an end product that is secreted into the environment. Only plant cells and few bacteria (e.g. Oxalobacter formigenes, Ralstonia oxalatica or Moorella thermoacetica) have been shown to be able to metabolize oxalic acid. Oxalic acid is degraded by e.g. O. formigenes to formic acid that can be utilized by many different microorganisms (Daniel et al., 2004).
4.
Conclusions
We observed an inhibition of the photocatalytic degradation of NOM by the addition of up to 10 mmol L1 of Cu2þ, also in combination with up to 10 mmol L1 of Fe3þ, Mn2þ and Zn2þ. The addition of Mn2þ was observed to change the magnitude of the effect of added Cu2þ in two cases:
−1.0
−0.8
−0.6
−0.4
a larger inhibiting effect of cadded(Cu2þ) was observed in the absence of added Mn2þ during the degradation of the DOC contained in F1 (large molecular weight material); and an inhibiting effect of cadded(Cu2þ) was only observed in the presence of added Mn2þ for the case of formic acid formation.
−1.2
ΔDOC / mg L−1
Bioavailability of low molecular weight organic
0 μmol L−1
5 μmol L−1 10 μmol L−1 cadded(Cu2+)
Fig. 7 e Effect of added Cu2D on the bioavailability of Fraction 2 after irradiation (tirrad [ 60 min). The change in DOC is defined as DDOC [ DOCafter incubation L DOCbefore incubation.
These two first-order interaction effects between added Cu2þ and added Mn2þ have the opposite “direction” for the same combination of metals and exemplify the complexity of the system at hand. No significant effects were observed when adding Fe3þ and Zn2þ to the suspensions. Our results point to a stabilization of the NOM against degradation by HO by complexation with Cu2þ, which may increase the longevity of NOM in aquatic systems. The addition of Cu2þ led to a decreased production of formic and oxalic acids. Addition of Mn2þ led to an interaction effect as described above. The amount of bioavailable DOC after irradiation was found to be directly coupled to the extent of photocatalytic degradation of the NOM. In particular, addition of Cu2þ, which was found to inhibit the photocatalytic degradation
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 3 9 e1 0 4 8
of the large molecular weight fraction F1, led to lower bioavailability of the partially degraded NOM. While the effect of the added metal ions could be quantified and a possible reason for the observed effects was suggested, the elucidation of the mechanistic basis for the observed influence of the added metal ions requires further investigation.
Acknowledgements This work was funded in part by the German Technical and Scientific Association for Gas and Water (DVGW) and by the German Research Foundation (DFG) through the Research Training Group on “Surface phenomena in aquatic systems and aqueous phases” (Graduiertenkolleg 366). We are grateful to Marta Lo´pez Furelos and Johannes Kern for their assistance in the laboratory, to Reinhard Sembritzki for the ICP-OES measurements and to Maren Daschner de Tercero for her comments on the manuscript. Numerous comments and suggestions from anonymous reviewers contributed to improving the manuscript.
Appendix. Supplementary material Supplementary data related to this article can be found online at doi:10.1016/j.watres.2010.10.013.
references
Aarthi, T., Madras, G., 2007. Photocatalytic degradation of rhodamine dyes with nano-TiO2. Ind. Eng. Chem. Res. 46, 7e14. Abbt-Braun, G., Frimmel, F.H., 2002. Setting the scene. In: Frimmel, F.H., Abbt-Braun, G., Heumann, K.G., Hock, B., Lu¨demann, H.D., Spiteller, M. (Eds.), Refractory Organic Substances (ROS) in the Environment. John Wiley and Sons, New York, pp. 1e38. Abdullah, M., Low, G.K.C., Matthews, R.W., 1990. Effects of common inorganic anions on rates of photocatalytic oxidation of organic carbon over illuminated titanium dioxide. J. Phys. Chem. 94, 6820e6825. Bailey, J.E., Ollis, D.F., 1986. Biochemical Engineering Fundamentals, second ed. McGraw-Hill, New York. ¨ zko¨semen, G., 1996. Photocatalytic Bekbo¨let, M., C¸ec¸en, F., O oxidation and subsequent adsorption characteristics of humic acids. Water Sci. Technol. 34, 65e72. Bideau, M., Claudel, B., Faure, L., Kazouan, H., 1991. The photooxidation of acetic acid by oxygen in the presence of titanium dioxide and dissolved copper ions. J. Photochem. Photobiol. A 61, 269e280. Box, G.E.P., Hunter, J.S., Hunter, W.G., 2005. Statistics for Experimenters: Design, Innovation, and Discovery, second ed.. In: Wiley Series in Probability and Statistics WileyInterscience, New Jersey. Brinkmann, T., 2003. Alkalischer und solarinduzierter Abbau von natu¨rlicher organischer Materie. Ph.D. thesis. Universita¨t Karlsruhe (TH). Karlsruhe, Germany. Brinkmann, T., Ho¨rsch, P., Sartorius, D., Frimmel, F., 2003. Photoformation of low-molecular-weight organic acids from
1047
brown water dissolved organic matter. Environ. Sci. Technol. 37, 4190e4198. Cai, R., Kubota, Y., Fujishima, A., 2003. Effect of copper ions on the formation of hydrogen peroxide from photocatalytic titanium dioxide species. J. Catal. 219, 214e218. Chen, C., Li, X., Ma, W., Zhao, J., Hidaka, H., Serpone, N., 2002. Effect of transition metal ions on the TiO2-assisted photodegradation of dyes under visible irradiation: a probe for the interfacial electron transfer process and reaction mechanism. J. Phys. Chem. B. 106, 318e324. Daniel, C., 1959. Use of half-normal plots in interpreting factorial two-level experiments. Technometrics 1, 311e341. Daniel, S.L., Pilsl, C., Drake, H.L., 2004. Oxalate metabolism by the acetogenic bacterium Moorella thermoacetica. FEMS Microbiol. Lett. 231, 39e43. Defoin, A., Defoin-Straatmann, R., Hildenbrand, K., Bittersmann, E., Kreft, D., Kuhn, H.J., 1986. A new liquid phase actinometer: quantum yield and photo-CIDNP study of phenylglyoxylic acid in aqueous solution. J. Photochem. 33, 237e255. Doll, T.E., Frimmel, F.H., 2005. Cross-flow microfiltration with periodical back-washing for photocatalytic degradation of pharmaceutical and diagnostic residuesdevaluation of the long term stability of the photocatalytic activity of TiO2. Water Res. 39, 847e854. Domek, M., LeChevallier, M., Cameron, S., McFeters, G., 1984. Evidence for the role of copper in the injury process of coliform bacteria in drinking water. Appl. Environ. Microbiol. 48, 289e293. Eggins, B.R., Palmer, F.L., Byrne, A., 1997. Photocatalytic treatment of humic substances in drinking water. Water Res. 31, 1223e1226. Frim, J.A., Rathman, J.F., Weavers, L.K., 2003. Sonochemical destruction of free and metal-binding ethylenediaminetetraacetic acid. Water Res. 37, 3155e3163. Frimmel, F.H., 1998. Characterization of natural organic matter as major constituents in aquatic systems. J. Contam. Hydrol. 35, 201e216. Frimmel, F.H., Abbt-Braun, G., Heumann, K.G., Hock, B., Lu¨demann, H.D., Spiteller, M. (Eds.), 2002. Refractory Organic Substances (ROS) in the Environment. Wiley, New York. Frimmel, F.H., Geywitz, J., 1983. Zur koordinativen Bindung von Metallionen an Gewa¨sserhuminstoffe. Fresenius Z. Anal. Chem. 316, 582e588. Gra¨ntzdo¨rffer, A., 2000. Formiat-Stoffwechsel in Eubacterium acidaminophilum: Molekulare und biochemische Charakterisierung der Wolfram- und Selen-haltigen FormiatDehydrogenasen sowie einer Eisen-Hydrogenase. Ph.D. thesis. Martin-Luther-Universita¨t Halle-Wittenberg, Halle. Griffin, M., Trudgill, P.W., 1972. The metabolism of cyclopentanol by Pseudomonas N.C.I.B. 9872. Biochem. J. 129, 595e603. Hirata, S., 1981. Stability constants for the complexes of transition-metal ions with fulvic and humic acids in sediments measured by gel filtration. Talanta 28, 809e815. Hoffmann, M.R., Martin, S.T., Choi, W., Bahnemann, D.W., 1995. Environmental applications of semiconductor photocatalysis. Chem. Rev. 95, 69e96. Huber, S.A., Balz, A., Frimmel, F.H., 1994. Identification of diffuse and point sources of dissolved organic carbon (DOC) in a small stream (Alb, Southwest Germany), using gel filtration chromatography with high-sensitivity DOC-detection. Fresenius J. Anal. Chem. 350, 496e503. Huber, S.A., Frimmel, F.H., 1991. Flow injection analysis for organic and inorganic carbon in the low-ppb range. Anal. Chem. 63, 2122e2130. Kabra, K., Chaudhary, R., Sawhney, R.L., 2004. Treatment of hazardous organic and inorganic compounds through aqueous-phase photocatalysis: a review. Ind. Eng. Chem. Res. 43, 7683e7696. Kolokassidou, K., Szymczak, W., Wolf, M., Obermeier, C., Buckau, G., Pashalidis, I., 2009. Hydrophilic olive cake extracts:
1048
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 3 9 e1 0 4 8
characterization by physicochemical properties and Cu(II) complexation. J. Hazard. Mater. 164, 442e447. Lamb, A., Tollefson, E., 1973. Toxic effects of cypric, chromate and chromic ions on biological oxidation. Water Res. 7, 599e613. Lapin, L., 1997. Modern Engineering Statistics. Duxbury Press, Belmont, CA. Lenth, R.V., 1989. Quick and easy analysis of unreplicated factorials. Technometrics 31, 469e473. Liao, C.H., Lu, M.C., Su, S.H., 2001. Role of cupric ions in the H2O2 oxidation of humic acids. Chemosphere 44, 913e919. Lindner, M., Theurich, J., Bahnemann, D.W., 1997. Photocatalytic degradation of organic compounds: accelerating the process efficiency. Water Sci. Technol. 35, 79e86. Litter, M.I., 1999. Heterogeneous photocatalysis: transition metal ions in photocatalytic systems. Appl. Catal. B Environ 23, 89e114. Madden, T.H., Datye, A.K., Fulton, M., Prairie, M.R., Majumdar, S. A., Stange, B.M., 1997. Oxidation of metaleEDTA complexes by TiO2 photocatalysis. Environ. Sci. Technol. 31, 3475e3481. Malato, S., Blanco, J., Alarco´n, D.C., Maldonado, M.I., Ferna´ndezIba´nez, P., Gernjak, W., 2007. Photocatalytic decontamination and disinfection of water with solar collectors. Catal. Today 122, 137e149. Martyniuk, H., Wieckowska, J., 2003. Adsorption of metal ions on humic acids extracted from brown coals. Fuel Proc. Technol. 84, 23e36. Matilainen, A., Sillanpa¨a¨, M., 2010. Removal of natural organic matter from drinking water by advanced oxidation processes. Chemosphere 80, 351e365. Park, E., Jung, J., Chung, H., 2006. Simultaneous oxidation of EDTA and reduction of metal ions in mixed Cu(II)/Fe(III)eEDTA system by TiO2 photocatalysis. Chemosphere 64, 432e436. Prado, A.G., Torres, J.D., Martins, P.C., Pertusatti, J., Bolzon, L.B., Faria, E.A., 2006. Studies on copper(II)- and zinc(II)-mixed ligand complexes of humic acid. J. Haz. Mat 136, 585e588.
Specht, C.H., Frimmel, F.H., 2000. Specific interactions of organic substances in size-exclusion chromatography. Environ. Sci. Technol. 34, 2361e2366. Tercero Espinoza, L.A., Frimmel, F.H., 2009. A simple simulation of the degradation of natural organic matter in homogeneous and heterogeneous advanced oxidation processes. Water Res. 43, 3902e3909. Tercero Espinoza, L.A., Malerba, R., Frimmel, F.H., 2010. Influence of dissolved organic carbon source, photocatalyst identity and copper(II) ions on the formation of bromoform in irradiated titanium dioxide suspensions. Catal. Today 151, 84e88. Tercero Espinoza, L.A., ter Haseborg, E., Weber, M., Frimmel, F.H., 2009. Investigation of the photocatalytic degradation of brown water natural organic matter by size exclusion chromatography. Appl. Catal. B-Environ 87, 56e62. Trevors, J., Cotter, C., 1990. Copper toxicity and uptake in microorganisms. J. Ind. Microbiol. 6, 77e84. Uyguner, C.S., Bekbolet, M., 2007. Contribution of metal species to the heterogeneous photocatalytic degradation of natural organic matter. Int. J. Photoenergy 2007 Article ID 23156. Van Dijk, H., 1971. Cation binding of humic acids. Geoderma 5, 53e67. Wang, N., Chen, Z., Zhu, L., Jiang, X., Lv, B., Tang, H., 2007. Synergistic effects of cupric and fluoride ions on photocatalytic degradation of phenol. J. Photochem. Photobiol. A 191, 193e200. Wingender, J., Neu, T., Flemming, H.C., 1999. What are bacterial extracellular polymeric substances? In: Wingender, J., Neu, T., Flemming, H.C. (Eds.), Microbial Extracellular Polymeric Substances: Characterization, Structure, and Function. Springer-Verlag, Berlin, p. 258. Zwiener, C., 2006. Trihalomethanes (THMs), haloacetic acids (HAAs), and emerging disinfection by-products in drinking water. In: Reemtsma, T., Jekel, M. (Eds.), Organic Pollutants in the Water Cycle. Wiley-VCH, Weinheim, pp. 251e286.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 4 9 e1 0 6 2
Available at www.sciencedirect.com
journal homepage: www.elsevier.com/locate/watres
The role of biomass, electron shuttles, and ferrous iron in the kinetics of Geobacter sulfurreducens-mediated ferrihydrite reduction Luke H. MacDonald 2, Hee Sun Moon 1, Peter R. Jaffe´* Department of Civil and Environmental Engineering, Princeton University, Princeton, NJ 08544, USA
article info
abstract
Article history:
This work presents a new framework for describing biologically mediated reduction of thin
Received 17 May 2010
layers of poorly crystalline iron oxides. The research here explores the nature of the
Received in revised form
biomass to surface area relationship and the role of biogenic ferrous iron during Geobacter
29 September 2010
sulfurreducens-mediated ferrihydrite reduction, with and without an electron shuttle,
Accepted 14 October 2010
through experiments and a mathematical model. The results indicate that a saturating
Available online 6 November 2010
function of biomass most accurately describes the rate of iron reduction without electron shuttles, based on the principle of electron transfer via direct contact. This study also finds
Keywords:
that the most appropriate model of iron reduction in the presence of electron shuttles
Iron reduction kinetics
includes both a saturating function of biomass for electron transfer via direct contact and
Ferrihydrite
a first-order electron transfer to ferrihydrite via the electron shuttle, strongly supporting
Geobacter sulfurreducens
the idea that G. sulfurreducens uses both pathways simultaneously. In all experiments, G.
Electron shuttle
sulfurreducens reduced less than 60% of the total ferric iron, a phenomenon that has often
Biomass
been explained through the inhibitory effects of biogenic ferrous iron in the dissolved
Ferrous inhibition
phase. However, through experiments with spikes of ferrous sulfate, this study suggests that the role of dissolved ferrous iron is passive in this case, and does not directly inhibit the extent of iron reduction in ferrihydrite coated sand. These experiments find that solid phase ferrous iron is the most probable primary product of ferrihydrite reduction, and that the conversion of solid ferric iron to solid ferrous iron depletes a fixed pool of bioavailable ferric iron, thereby accounting for the incomplete reduction of ferric iron observed here. This is the first reported model that explicitly treats solid ferrous iron as the primary product of reduction, with aqueous ferrous iron as a passive byproduct. This simple mathematical model readily translates to other systems of microbially mediated iron reduction. ª 2010 Elsevier Ltd. All rights reserved.
1.
Introduction
Poorly crystalline iron oxides such as ferrihydrite are highly reactive, binding with many contaminants and important
nutrients. Their nearly ubiquitous presence in sediments and soils makes the chemistry of such iron oxides an important control on contaminant transport in groundwater and sediments, as iron is the dominant redox sensitive element in
* Corresponding author. E-mail address:
[email protected] (P.R. Jaffe´). 1 Present address: School of Earth and Environmental Sciences, Seoul National University, Seoul 151-742, Korea. 2 Present address: Johns Hopkins University, Global Water Program, Baltimore, MD21205, USA. 0043-1354/$ e see front matter ª 2010 Elsevier Ltd. All rights reserved. doi:10.1016/j.watres.2010.10.017
1050
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 4 9 e1 0 6 2
a wide variety of sub-surface environments (Lovley et al., 2004). As a testament to the influence and complexity of iron oxide biogeochemistry, much research has focused on microbially mediated reduction of poorly crystalline iron oxides under anaerobic conditions in the sub-surface, as bacteria transform ferric iron (Fe(III)) to ferrous iron (Fe(II)), leading to discoveries about the complex nature of solid phase transformations (Hansel et al., 2005; Islam et al., 2005) and the mechanisms through which microbes drive these transformations (e.g. Lies et al., 2005). The seemingly contradictory interplay between iron reduction and contaminant solubility can lead to the direct release of sorbed contaminants such as arsenic or phosphate under some conditions (Bennett and Dudas, 2003; Burnol et al., 2007) or to the direct capture of contaminants like arsenic under other conditions (Islam et al., 2005). Iron oxidation, on the other hand, usually leads directly to exclusive contaminant capture (e.g. Blute et al., 2004). Microbially mediated iron reduction can also indirectly influence contaminant mobility when it occurs simultaneously with microbially mediated uranium reduction and precipitation (Anderson et al., 2003; Komlos et al., 2008). Despite the many recent advances in understanding the fundamentals of iron reduction, much remains undiscovered. In particular, few studies have focused on a simple and robust mathematical description of the influence of biomass on iron reducing kinetics for surface bound microbes undergoing direct electron transfer from organic carbon to ferric iron oxides. The relationship between biomass concentration and rate of iron reduction is a necessary and important component of any predictive model that describes the transport of contaminants that interact with iron oxides, especially during processes such as biostimulation, when biomass can vary by over an order of magnitude within a period of a few weeks (Moon et al., 2010). Contaminant transport and geochemical models of aqueous substrate and electron donor consumption, including Fe(III), typically use the Monod growth formulation with MichaeliseMenten uptake kinetic form (e.g. Guha and Jaffe´, 1996; Wang et al., 2003), expressed in the dual Monod form as dB S1 S2 B bB; ¼ mmax KS1 þ S1 KS2 þ S2 dt
(1)
and mmax ¼ Yvmax ;
(2)
where S1 and S2 are the concentration of the electron donor and electron acceptor (moles), B is the biomass (cells/L), mmax is the maximum growth rate (hr1), KS1 and KS2 are half-saturation constants (moles), b is a decay coefficient to describe cell death (hr1), Y is the cell yield (cells/mole), and vmax is the maximum substrate uptake rate (mole/(cells hr)). Biogeochemical models also often use this formulation to describe surface-driven processes like manganese and iron reduction (e.g. Burgos et al., 2003; Smith and Jaffe´, 1998; Wang et al., 2003). MichaeliseMenten uptake kinetics derive from laws of diffusion (Aksnes and Egge, 1991), and, although Monod kinetics were originally empirically derived, current research offers a thermodynamic explanation for Monod kinetics (Liu et al., 2003). In the above kinetic expression, the rate of reduction is proportional to biomass. However, a proportional relationship between biomass and solid phase iron reduction rate surely
cannot hold, especially at high biomass concentrations. In this surface-driven phenomena, bacteria only reduce proximal ferric ions, so the limiting control on the rate of reduction is the surface density of bacteria or, more specifically, the ratio of the ferric substrate total surface area to the combined area that all iron reducing bacteria can influence. As more bacteria load the surface of iron oxides, the gain in iron reduction rate by adding additional bacteria must diminish because the system approaches complete biomass saturation. Yet this effect may not be universal. It is not clear whether highly bioavailable, thin layers of amorphous ferrihydrite, which are similar to freshly precipitated iron found in natural sediments, will display the effects of biomass saturation in natural conditions or under bioremediation conditions. Therefore, the present study focuses on biomass concentrations near the range relevant for biostimulation field experiments, found to be from w106 to w108 cells/g sediment (Cardenas et al., 2008; Moon et al., 2010), on thin layers of amorphous ferric iron. To isolate surface effects, this study focuses on Geobacter sulfurreducens which have not been demonstrated to synthesize compounds to reduce spatially distant iron oxides. Geobacter species are thought to reduce iron oxides by direct electron transfer to the oxide surface, either via electrically conductive filamentous pili or via surface proteins. A geneknockout study of G. sulfurreducens showed that pili deficient mutants do not reduce ferric iron oxides while wild-type do (Reguera et al., 2005). The role of pili is not clear; Reguera et al. (2007) acknowledge the possible structural role that pili take to attach to surfaces and other work finds that surface cytochromes are key components of electron transfer in G. sulfurreducens (Nevin et al., 2009). Lovley (2008) provides thorough discussion of pili and proteins thought to be involved in electron transfer. Despite the incomplete information on the nature of electron transfer, all aforementioned models depend on localized electron transfer from G. sulfurreducens to iron oxides. No study has demonstrated solid ferric iron reduction at distance for G. sulfurreducens without exogenous compounds. In contrast, research demonstrates that another well-studied iron reducing bacterial genus, Shewanella, can reduce spatially distant iron oxides without exogenous compounds (Lies et al., 2005; Rosso et al., 2003). Therefore, G. sulfurreducens is an ideal candidate for studying the surfaceloading limitations of iron reduction. Although evidence does not indicate that G. sulfurreducens can synthesize compounds to reduce spatially distant ferric iron, G. sulfurreducens can use naturally occurring compounds to reduce ferric iron. Humic substances, a class of large organic molecules found in soils and sediments, can act as redox intermediates. G. sulfurreducens mediates the transfer of electrons from small organic molecules like acetate to various humics (Scott et al., 1998), which then pass electrons abiotically to ferric oxyhydroxides (Jiang and Kappler, 2008). Since the oxidation state of such humics cycle between oxidized and reduced while they ferry electrons from small organic molecules to an insoluble terminal electron acceptor, such humics are called electron shuttles. Electron shuttles increase the rate of iron reduction for iron reducing bacteria on a suite of iron oxides and oxyhydroxides (Burgos et al., 2003; Hacherl et al., 2003; Komlos and Jaffe´, 2004; Scott et al., 1998;
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 4 9 e1 0 6 2
Wolf et al., 2009). Research demonstrates that Monod-type kinetics apply to humic reduction (Jiang and Kappler, 2008), and the abiotic transfer of electrons from reduced humics to solid iron oxides is unlikely to depend on biomass. This raises an interesting, unanswered question: in the presence of electron shuttles, will the rate of bacterially mediated iron reduction have a different form with respect to biomass? To uncover the biomass kinetic form, this study compares experiments with and without an electron shuttle, 9,10anthraquinone-2,6-disulfonic acid (AQDS). AQDS is used as a functional analogue to naturally occurring humics but not as a structural analogue because AQDS is smaller than natural humics and may diffuse into the periplasm to dramatically accelerate reduction rates. Consequently, AQDS-driven electron shuttling is an extreme case that minimizes the impact of surface limitations on iron reduction rate, and, by adding AQDS, this research tests whether humics remove the surface limiting effect of biomass or whether surface limitations hold even in the presence of rapid electron shuttling. Roden (2006) elegantly shows the intriguing result that the initial rate of iron reduction is a saturating function of biomass when no electron shuttle is present. That work demonstrates that G. sulfurreducens and Shewanella putrefaciens achieve a maximum initial reduction rate as biomass increases in slurries of synthetic goethite, offering proof that the rate of iron reduction saturates as biomass increases. But goethite is a crystalline iron oxyhydroxyide, and the principles of biomass saturation on goethite may not apply over relevant concentrations of biomass on thin layers of amorphous iron oxides like ferrihydrite, which are more bioavailable and yield faster rates of iron reduction (Bonneville et al., 2004). Roden (2006) tested natural sediments, focused on the initial rate of reduction, and did not test for saturating effects in the presence of electron shuttles. Like that study, Bonneville et al. (2006) also showed a saturating function of biomass in the absence of electron shuttles through application of a geometric model considering idealized nanohematite spheres, another highly crystalline iron oxide. Both models focused on the initial rate of reduction. As a result, the research presented here seeks to reproduce and expand on the work of Roden (2006) and Bonneville et al. (2006) in several ways. First, this study will test whether the notion of a saturating relationship of biomass to solid ferric iron is valid for highly bioavailable, thin layers of amorphous ferrihydrite in porous media over relevant biomass concentrations. Through the development of a model the present research also seeks to extend the notion of biomass saturation to iron reduction rate at all times, not only the initial rate of reduction. Most importantly, this research will address whether the surfacesaturating relationship holds in the presence of electron shuttles, because it is not clear if the pathways are mutually exclusive, compete, or coexist (Cutting et al., 2009). This research will help resolve that issue by rigorously exploring kinetics under a saturating biomass with and without an electron shuttle. Aside from the biomass surface area kinetic relationship, another puzzle is the inability of bacteria to completely reduce solid ferric iron oxides in homogenous, closed systems. Iron reducing bacteria typically reduce a fraction of total ferric iron (e.g. Fredrickson et al., 1998; Hacherl et al., 2003), but there is no single unifying explanation for the intractability of this fraction of iron oxides. Some view sorption of biogenic Fe2þ to
1051
surface Fe(III) as the main mechanism for stopping ferric reduction, while other studies invoke thermodynamics. For example, Royer et al. (2002a) showed that natural organic matter and ferrozine, which enhances ferrous iron solubility, enhanced the final extent of hematite reduction reduction and concluded that sorption was the limiting factor in the total amount of Fe(II) produced. In a related study, Royer et al. (2002b) showed that spikes of aqueous Fe(II) before to inoculation with S. putrefaciens CN32 inhibited hematite reduction and greatly diminished the effects of all of the organic materials, again suggesting that sorption explains the cutoff in ferric reduction. Hacherl et al. (2003) and Roden and Urrutia (1999) found similar results. Yet later, using Mn(II) as an analogue to Fe(II), Royer et al. (2004), found that Mn(II) sorption did not inhibit hematite reduction, implying that Fe(II) sorption does not stop hematite reduction and instead suggest that thermodynamics are mainly responsible. But this conclusion depends partly on deriving a value for the thermodynamic potential of hydrated hematite, which was unknown and was indirectly calculated. Also, it is important to note that the majority of biogenic ferrous iron in those studies was in the aqueous phase, which is not true for ferrihydrite reduction where most ferrous iron is in the solid phase. Similarly, other studies proposed that the diminishing thermodynamic energy of ferrous iron production explains why ferric iron reduction stops when ferric iron is left in the system; Liu et al. (2001) show that ferric iron reduction ceases when Fe2þ production yields less energy than is needed to make adenosine5-triphosphate (ATP), the fundamental energy storing molecule of all cell metabolism. But such calculations are not a direct test of the thermodynamic limitation hypothesis since they depend on the assumption that Fe2þ is the primary product of reduction. One way to directly test the hypothesis that thermodynamics limit the extent of ferric iron reduction is to test whether the addition of dissolved ferrous iron inhibits the rate of iron reduction in the presence and absence of electron shuttles. The energy of the total reaction is the same with or without a redox intermediate, so if thermodynamics limit the extent of iron reduction this limitation should be the same with or without an electron shuttle. The work presented in this paper will use this concept test to revisit the issue of thermodynamic limitations on ferric iron reduction. Since a main goal of this study is to determine biomass saturation effects on the rate of iron reduction, the experiments here involve reactions on sand coated with thin layers of ferrihydrite rather than studying reactions on pure ferrihydrite. Coating sand particles with iron oxides ensures a more even distribution of iron oxides in the experiment than would stirring slurries of pure iron oxides, and using sand grains as a lattice for ferrihydrite prevents aggregation of iron particles and flocculation. Aggregation could have the undesirable impact of changing the surface area to biomass ratio during the course of an experiment, decreasing bioavailability (Cutting et al., 2009). Following the above motivating discussion, this work takes a new look at the kinetics of iron reduction, with the goal of using experimental results to develop a mathematical model that incorporates the surface loading of biomass and explains the cutoff in iron reduction. Specifically, through batch experiments with different biomass concentrations, experiments with and without AQDS, experiments with ferrous sulfate additions, and
1052
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 4 9 e1 0 6 2
experiments with an Fe(II)-specific chelator, this research tests four questions: (i) does the rate of iron reduction on ferrihydrite saturate with respect to biomass as G. sulfurreducens load ferrihydrite surfaces, (ii) do electron shuttles shift the G. sulfurreducens biomass surface area kinetic relationship from a saturating function to some other function or are these pathways independent, (iii) does ferrous sorption inhibit the rate or extent of G. sulfurreducens mediated ferrihdyrite reduction, and (iv) do the thermodynamics of dissolved ferrous iron production limit the rate or extent of G. sulfurreducens mediated ferrihydrite reduction? Detailed mineralogy is not performed here. Iron reduction and corresponding mineral transformations are extremely complex, and biostimulation models need a simple and robust formulation for conditions in which the detailed geochemistry might not be known.
2.
Methods
2.1.
Ferrihydrite coated sand
Iron oxide coated sand consists of ASTM grade 20-30 sand (U.S. Silica), a mesh size equivalent to 0.60e0.85 mm, etched in 2 N nitric acid overnight, rinsed in DI water, wet and dry sieved, and coated in a synthetic iron oxide according to the method of Brooks et al. (1996). After this initial preparation, a 6-min rinse with deionized water removed loosely attached iron oxides that might detach, clog pore space, and aggregate. Removing loose particles better ensures a consistent surface area of iron oxides throughout the course of the experiments and ensures the thinest possible layer. Air drying was the final step in preparation of iron coated sand. Numerous studies on sand prepared by this method found the iron coating to be ferrihydrite for lengths over 30 days after synthesis (Brooks et al., 1996; Hansel et al., 2005). Ferrihydrite coated sand was loaded into test vials for iron reduction experiments. Two grams of coated sand were mixed with 18 g of uncoated sand to achieve fast reduction kinetics. Like the coated sand, 2 N nitric acid etched the uncoated sand overnight, and the etched sand underwent dry and wet sieving.
2.2.
Media
An artificial groundwater (AGW) served as the media for these iron reduction experiments, similar to that described in (Benner et al., 2002), which was designed to closely resemble naturally occurring groundwater. AGW contained 20 mg/L NaCl, 0.95 mg/L NH4Cl, 5 mg/L KCl, 50 mg/L MgSO4, 0.95 mg/L KH2PO4, 1/2 mL Wolfes mineral solution (ATCC), and 1/2 mL Wolfes vitamin solution (ATCC), equilibrated under 1% CO2, 99% N2 (Airgas, certified grade) and calcite (0.6 g/L). Visual MINTEQ calculations for batch vials with quartz and ferrihydrite reveal an ionic strength of 0.0068 and pH of 7.8, a pH slightly above experimental results, and an initial total dissolved carbonate concentration greater than 10 mM ðtotal carbonate ¼ ½H2 CO3 þ ½HCO þ ½CO2 3 Þ. All stock salts were reagent grade (Fisher, Sigma). Unlike Benner et al., the AGW of this study contains elevated vitamins and trace minerals here, which ensures no limits on iron reduction except iron availability. This solution was also equilibrated with lower levels of atmospheric CO2. Acetate served as the electron donor and organic carbon
source at 10 mM concentrations, a high level that keeps acetate from becoming rate limiting. Experiments either contained 140 mM AQDS or were without any AQDS. All media was autoclaved prior to running the experiments at 121 C for 20 min and stored anaerobically. After the addition of 6.5 mL of media with bacterial culture to 20 g prepared sand mixtures, the media purged for 15 min under 1% CO2, 99% N2 and was crimp sealed with a rubber stopper.
2.3.
Bacterial culture
G. sulfurreducens (ATCC 51573) were cultured in a basal salt media as described elsewhere (Lovley and Phillips, 1988), with 10 mM sodium acetate as the electron donor and 8.0 g/L fumarate as the electron acceptor. Initial cultures from ATCC grew to late log phase, before centrifuge harvesting at 8000 g and 4 C for 15 min and freezing at 80 C with 10% glycerol to store as seed cultures. Large batches of identical seed cultures were grown from frozen stock and again harvested and refrozen. Prior to inoculation in a batch test vial, frozen seed cultures were revived in fumarate bearing media, grown for 96 h, twice centrifuged (8000 g, 4 C, 20 min) and rinsed with sterile AGW. These cultures were then added to batch vials. Bacterial biomass concentrations were determined by epifluorescence microscopy (Lisle et al., 2004), with counts performed on 6 slides for each cell containing AGW media fixed at the moment of adding to sediment-bearing batch vials.
2.4.
Sampling and analysis of batch experiments
Identically prepared 20 mL vials were sampled in duplicate. While purging under 1% CO2, or inside an anaerobic glovebox (Coy), pH was measured in dedicated sample vials with microelectrodes contained within a 16-gauge needle (Microelectrodes, inc) and found to remain circumneutral throughout (pH ¼ 7.0 0.5). Each vial was destructively sampled inside the anaerabic glovebox by removing 3.5 mL of porewater via syringe. From this porewater, two samples of 0.5 mL were filtered (0.2 mM, Fisher) and added to 2 N HCl (final conc is 1 N HCl) for determination of Fe(II) (aq) and using 3-(2-pyridyl)-5,6bis(4-phenylsulfonic acid)-1,2,4-triazine, hereafter referred to as ferrozine Stookey (1970), in a strong HEPES buffer (35.8 g/L) titrated with 10 M NaOH to pH 7.0. This filtration proved sufficient to remove solid iron particles in random filtered samples. Analyzing for ferrous iron after adding the strong reductant hydoxylamine to a 0.25 N final concentration yielded no additional iron within detection limits. From the original 3.5 mL of porewater, 1 mL of filtered porewater was stored in a sealed container at 4 C for acetate analysis via ion chromatography (Dionex) using a Bio-Rad HPLC fast acid analysis column (100 7.8 mm). The reduced form of AQDS, AH2QDS, was measured anaerobically by combining the remaining 1.5 mL of the original 3.5 mL of filtered porewater from duplicate vials into a single cuvette (Fisher), reaching a final volume of 3 mL, for spectrophotometric measurement at 405 nm (Genesys) inside the anaerobic glovebox. Adding 10 mL of 1 N HCl to the sediment and remaining 3 mL of AGW (final concentration 0.77 N HCl) allowed for solidassociated Fe(II) via ferrozine analysis Stookey (1970). Adding up to 5 N HCl did not increase the amount of extractable Fe(II).
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 4 9 e1 0 6 2
Visually, all vials appear as pure sand after the 24 h extraction, losing any trace of color from red ferric oxides or black ferrous precipitants. Adding hydroxylamine to a final concentration of 0.25 N reduces all ferric iron, allowing for total iron measurement via the ferrozine method. Thus, solid-associated ferrous iron is defined as Fe(II)s ¼ [0.77 N HCl Fe(II)] [Fe (II) (aq)]. In each batch vial at time zero for biomass experiments, acid extraction and iron analysis found 31.4 mmoles of Fe(III), or 15.7 mmoles of Fe(III) per gram of iron coated sand, which also translates to a concentration of 4.83 mM of solid ferric iron. For experiments testing the role of dissolved ferrous iron, the same analysis revealed 86.4 mmoles Fe(III), or 43.2 mmoles of Fe(III) per gram of iron coated sand (13.3 mM). The experimental analysis in this paper relies strictly on measurements from wet-chemistry, owing to the inherent difficulty in obtaining reliable solid phase data on thin layers of amorphous iron oxides bound to highly crystalline quartz grains. Even if possible, it is doubtful whether solid phase analysis would reveal any new insights because the transformation of ferrihydrite to other iron oxides under iron reducing conditions is already well-documented (Benner et al., 2002; Coker et al., 2008; Fredrickson et al., 2001; Hansel et al., 2003), and the experiments here focus on the role of biomass and ferrous iron.
2.5.
Batch design strategy: biomass surface loading
Here, a batch experiment consists of identically prepared vials, with the same initial biomass (population size), the same AQDS concentration, and the same Fe(III) content. Separate batch experiments differ in the initial bacterial biomass or AQDS content. The strategy of varying the biomass while holding all other constituents fixed highlights the relationship between biomass and solid phase iron content, with and without AQDS. Bacterial population size in these experiments was selected in a range relevant for field scale biostimulation. Cardenas et al. (2008) found iron reducing bacteria concentrations ranging from 1.93 106 cells/g sediment to 9.40 107 cells/g, and the experiments in this study range from 7.50 105 cells/g sediment to 6.30 107 cells/g. Control experiments, data not shown, revealed that no iron or AQDS reduction occurred without G. sulfurreducens. All experimental vials were incubated at 30 C under gentle shaking. While precise direct measurement of biomass after inoculation was not possible, growth models estimate that biomass concentrations remain roughly constant throughout the course of the experiments, within 5% with the possible exception of the low biomass, high AQDS experiment, which was, accordingly, not included in model fitting. See the Appendix for details.
2.6.
Batch design strategy: role of dissolved ferrous iron
To explore the role of Fe(II), spikes of ferrous sulfate at either 0.8 or 8 mM concentrations were added to batch vials at the start of microbial reduction, with and without AQDS. The purpose of these experiments are to test: 1. Does biogenic Fe2þ inhibit iron reduction thermodynamically? 2. Does biogenic Fe2þ sorb to the surfaces and inhibit iron reduction?
1053
These concentrations of ferrous sulfate were selected because 0.8 mM is roughly equal to the maximum biogenic aqueous ferrous iron observed, and 8 mM is an extreme case well over biogenic levels produced, so any thermodynamic or sorptive impact of biogenic ferrous iron should be evident. Complexation of sulfate did not increase overall solubility according to MINTEQ calculations, since ferric oxides, siderite, and vivianite were supersaturated under both conditions. At 8 mM FeSO4, MINTEQ calculated that 67% of Fe2þ was a free ion, 19% was complexed as FeSO4(aq), 2% as FeOHþ, 5% as FeHCO3 and 7% as Fe-acetate. At 0.8 mM FeSO4, MINTEQ calculated that 77% of Fe2þ was a free ion, 5% was complexed as FeSO4(aq), 7% as FeOHþ, 5% as FeHCO3 and 9% as Fe-acetate. Other vials contained an Fe(II) chelator, ferrozine, at a concentration of approximately 20 mM. At circumneutral pH, Ferrozine (Fz) binds to iron exclusively as FeFz3 (Huang et al., 2003), so adding 20 mM Fz creates the binding capacity for 6.65 mM dissolved ferrous iron, half the concentration of iron present in the initial ferrihydrite.
2.7.
Numerical simulation
The model equations developed in the discussion section were coded in Matlab as ordinary differential equations and integrated using the internal Matlab ode45 program, a variable step size RungeeKutta method. The model has an analytical solution when AQDS is not present, and comparing results from the ode45 integration to the analytical solution revealed a negligible difference using the model parameters in Table 3, suggesting that ode45 is an appropriate solver. Matlab optimization function lsqcurvefit, which scans the parameter space to minimize the difference between modeled results and real data, provided parameter estimates for experiments with and without AQDS. The lsqcurvefit searched for parameters using the large-scale, trust-region reflective Newton method, as this yielded the most reliable results. The parameter fits for experiments without AQDS became inputs into the model with AQDS and iron coated sand. Fits to batch experiments containing AQDS but with no iron coated sand generated parameters for experiments with AQDS (data not shown), which then became inputs to the model for experiments containing AQDS and iron coated sand. Using parameter estimates from simplified systems as inputs to the full AQDS and plus iron system allows the optimization function lsqcurvefit to focus on only one parameter, the rate constant for electron transfer from the reduced form of AQDS, AH2QDS, to ferrihydrite. A suite of experiments with 10 mM acetate and varying AQDS and biomass concentrations, but no ferrihydrite, was used to determine the firstorder kinetic parameters of G. sulfurreducens mediated AQDS reduction as used in the model (data not shown).
3.
Results
3.1.
Biomass loading
Fig. 4 presents the time series of biogenic ferrous iron from solid and aqueous phase measurements, with reduced iron as a fraction of the total ferric iron present at the start of the
1054
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 4 9 e1 0 6 2
experiment. Raw data appear as symbols and model results appear as lines. The raw data in this figure reveal that increasing biomass increases the rate of iron reduction for a given biomass, showing that the electron shuttle AQDS enhances the rate of iron reduction. From the experimental data in these graphs, it is clear that adding AQDS does not result in an increase in the total amount of biogenic ferrous iron produced. During the course of the experiments shown, biomass remained roughly constant as explained in detail in the Appendix, with the possible exception of the lowest biomass experiments with AQDS, which have been removed from analysis. Experiments without AQDS show more complex dissolved ferrous iron trends after day 3, with most experiments showing a drop in dissolved ferrous iron concentration, and at least one experiment with AQDS show a similar pattern beginning between days 1 and 2 (down triangles). This pattern could be the precipitation of ferrous minerals like vivianite or siderite: þ 3Fe2þ þ 2HPO2 4 þ 8H2 O/ Fe3 ðPO4 Þ2 $8H2 O ðsÞ þ2H
(3)
þ Fe2þ þ HCO 3 /ðFeCO3 ÞðsÞ þH
(4)
Indeed, the solubility of vivianite and siderite is low, and Visual MINTEQ calculations show both solids as above saturation at 0.075 mM Fe2þ. Aqueous concentrations in the experiment climb to as high as 0.75 mM Fe2þ (x15% FeTOTAL). This suggests that the formation of both solids is thermodynamically favorable in the experiments of Fig. 4, in keeping with siderite and vivianite formation observed in other, similar experiments (Fredrickson et al., 1998; Islam et al., 2005; Liu et al., 2001). With more than 1% CO2 in the headspace plus 10 mM initial total dissolved carbonate species and with a phosphate concentration of 0.07 mM in AGW, there is more than enough carbonate and phosphate to account for the observed maximum solidassociated of roughly 50% FeTOTAL, equal to 2.45 mM Fe(II)s. Since Fe2þ stays above 0.075 mM, the system is out of equilibrium with respect to vivianite and siderite formation. Fig. 1 makes it clear that the initial rate of reduction is much higher in the presence of AQDS over the range of biomass concentrations explored. AQDS also increases the final solubility of ferrous iron, but not the maximum extent of iron reduction, so diminishing surface limitation or allowing simultaneous reduction is likely to be the key impact of adding electron-shuttling AQDS and a key part of the model developed during the discussion section below, which explains the model derivation and model results in detail. Fig. 2 shows the AH2QDS time series used to calibrate the model. Although the molecule cycles between AQDS and AH2QDS, the rate of electron transfer from AH2QDS to ferrihydrite is the rate limiting step, which is evident because AH2QDS accumulates in the experiments during the active phase of iron reduction (Fig. 2). Hence, the rate of electron transfer from acetate to AQDS exceeds the rate from AH2QDS to iron.
3.2.
Role of dissolved ferrous iron
Figs. 3 and 4 show the results of ferrous sulfate or ferrozine additions, displaying time series of ferrous iron for the test conditions referenced against a control experiment without FeSO4 or ferrozine. No measurable ferrous iron sorption or
precipitation occurred in abiotic controls (data not shown). Because the aqueous ferrous iron content remained high in the experiments with ferrous sulfate spikes (Fig. 3, panels a, b), the time series of aqueous iron shows that little sorption or precipitation of iron from ferrous sulfate occurred, except after day one in the 8 mM FeSO4 experiment. Panel a reveals a drop in the dissolved iron concentration after day one that corresponds to a rise in the solid-associated ferrous iron concentration (panel d ), while the cumulative sum of dissolved plus solid-associated ferrous iron remained relatively constant (panel g). Precipitation of ferrous iron explains this pattern. Interestingly, ferrozine addition led to almost twice the biogenic aqueous iron concentration in the presence of AQDS, but had no effect in the absence of AQDS (panel c). In both cases, as the bulk of reduced iron is in the solid phase, the total biogenic Fe(II) was roughly similar to control experiments for ferrozine additions. This is a different result than that found in, for example, (Royer et al., 2002a), which studied hematite reduction. From Fig. 3 it is not clear whether the spike of FeSO4 inhibited biogenic iron production because of the high background Fe(II) levels. However, one can determine whether a ferrous spike inhibits iron reduction by tracking the total amount of ferrous iron in the system, which includes both the dissolved and solidassociated ferrous iron, and then subtracting any ferrous iron added as ferrous sulfate and labeling the remaining ferrous iron as biogenic ferrous iron. Accordingly, Fig. 4 shows only the biogenic ferrous iron normalized as a fraction of the total iron. Fig. 4 reveals that spiking the system with the highest observed biogenic aqueous ferrous iron concentrations (0.8 mM) does not inhibit iron reduction. Furthermore, of the experiments performed here, Table 1 shows that spikes of ferrous sulfate only inhibit experiments without AQDS the ferrous sulfate concentration is 8 mM, ten times the biogenic ferrous iron concentration, and do not inhibit experiments with AQDS. Nor did adding ferrozine as an Fe(II)-specific chelator enhance the rate or extent of iron reduction, as Fig. 4 also shows.
4. Discussion: model concept and model results 4.1.
Model concept
As a starting point into developing a mathematical model to predict the rate of iron reduction while considering the role of biomass and the role of ferrous iron, this discussion begins with the concept of bioavailable iron. It is reasonable to define bioavailable ferric iron as the portion of ferrihydrite that is able to receive electrons either from bacteria directly attached to the surface or from AH2QDS, and assume that bioavailable ferric iron is a fixed fraction at time zero. Fig. 4 suggests that bioavailable ferric iron is the same with and without AQDS. The fraction of iron that is bioavailable is necessarily a function of the surface area, the surface morphology, and the degree of crystallinity. This fraction may represent only the top layer of ferric iron ions, or the first several layers, or only lewis acid sites, or ions buried deep in the crystal. Such nuances may not be possible to study in complex systems even with advanced spectroscopic techniques, and their elucidation is not undertaken here. So, the model assumes
1055
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 4 9 e1 0 6 2
a
Biogenic iron ratios no AQDS
b
0.6
Ratio of biogenic solid Fe(II) 0.3 to Fe(total) 0
c
e
0
2
4
6
0
8
d
0.2
0
2
4
6
8
0
2
4
6
8
0
2
4
6
8
0.2
0.1
0
2
4
6
0
8
f
0.8
Ratio of biogenic solid & aqueous 0.4 Fe(II) to Fe(total) 0
0.6
0.3
Ratio of biogenic aqueous Fe(II) 0.1 to Fe(total) 0
Biogenic iron ratios with AQDS
0.8
0.4
0
2
4
6
0
8
Time (days)
Time (days)
,
5.02
107 cells/µM Fe(III)
,
1.76
107 cells/µM Fe(III)
,
3.84
106 cells/µM Fe(III)
,
1.39
106 cells/µM Fe(III)
,
4.26
105 cells/µM Fe(III)
Fig. 1 e Biogenic iron production with 140 mM AQDS (b,d,f) and without AQDS (a,c,e) for five biomass concentrations (< ±5%). Lines are model results. The top row depicts solid ferrous iron (a,b), the middle depicts aqueous ferrous iron (c,d), and the bottom depicts the sum of all ferrous iron (e,f).
that the rate of reduction is proportional to the concentration open surface sites, Feo(t), an assumption consistent with other published models (Burgos et al., 2003; Roden, 2006). Next, the discussion turns to the role of ferrous iron. The above results show that spiking the system with ferrous iron does not inhibit the rate of iron reduction except at levels much higher than those found during microbially driven iron reduction in these experiments, and they demonstrate that increasing the solubility of ferrous iron by adding a chelator does not enhance the rate or extent of reduction. Therefore, the sorption of Fe2þ or the thermodynamics of dissolved ferrous iron production do not limit the rate or extent of iron reduction for these experimental conditions.
To further shed light on this, one can examine the thermodynamics of Fe2þ production as if it were the primary reaction product. Then, the following conditions apply: þ CH3 COO þ 4AQDS þ 4H2 O/2HCO 3 þ 4AH2 QDS þ H ; DG1 ;
(5)
8FeðOHÞ3ðsÞ þ16Hþ þ 4AH2 QDS/8Fe2þ þ 4AQDS þ 24H2 O; DG2 ; (6) and CH3 COO þ 8FeðOHÞ3ðsÞ þ15Hþ /8Fe2þ þ 2HCO 3 þ 20H2 O; DG3 : (7)
1056
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 4 9 e1 0 6 2
AH2QDS concentrations during iron reduction 150
AH2QDS (µM)
75
0
0
2
4
6
8
Time (days) , , , ,
5.02 1.76 3.84 1.39
7
10 cells/µM Fe(III) 107 cells/µM Fe(III) 106 cells/µM Fe(III) 6 10 cells/µM Fe(III)
Fig. 2 e Time series of AH2QDS during iron reduction, the reduced form of AQDS, for the experiments in Figure 1 (b,d,f). Symbols are data (< ±5%), and lines are modeled results.
8 mM FeSO4
a
0.8 mM FeSO4
10
b
1
0
0
d
6
Solid Fe(II) (mM)
3
3
0
0
e
16
h
Solid & aqueous 8 Fe(II) (mM) 0
Ferrozine
2
Aqueous 5 Fe(II) (mM)
g
Since the Gibbs free energy of reaction DG3 ¼ DG1 þ DG2 , the energy of electron transfer from acetate to ferrihydrite is the same for the system with AQDS as for the system without AQDS. Without AQDS, G. sulfurreducens derive metabolic energy from the total reaction ðDG3 Þ, but in the presence of AQDS G. sulfurreducens can derive energy from the transfer of electrons from acetate to AQDS ðDG1 Þ or from acetate directly to Fe(III) ðDG3 Þ. No study suggests that G. sulfurreducens captures energy from electron transfer between AH2QDS and Fe(III) ðDG2 Þ. But regardless of which reaction G. sulfurreducens draws energy from, from the observation that an 8 mM ferrous sulfate addition does not inhibit iron reduction in the presence of AQDS, a spike of ferrous iron more than ten times that of biogenic Fe2þ levels, one can only conclude that the thermodynamics of dissolved Fe2þ production do not limit the rate or extent of iron reduction in the batch systems under study. Viewed in this light, Fe2þ is not the primary product of iron reduction but is instead a byproduct of iron reduction, with
c
1
0
1
2
1 2 Time (days)
3
6
f
Control
0
1
2
3
0
1
2
3
6
3
0
1
2
0
3
6
0
0
3
i
3
0
2
6
3
0
1 2 Time (days)
3
0
0
1 2 Time (days)
3
AQDS control
8 mM FeSO
AQDS + 8 mM FeSO
0.8 mM FeSO4
AQDS + 0.8 mM FeSO4
Ferrozine
AQDS + Ferrozine
4
4
Fig. 3 e Effects of ferrous iron and ferrozine additions on iron reduction (< ±5%), with lines to guide the eye. The left column of panels (a,d,g) shows 8 mM FeSO4 additions, the middle column (b,e,h) shows 0.8 mM FeSO4, and the right column (c,f,i) shows ferrozine addition. The top row of pan-els (a,b,c) shows dissolved Fe(II), middle row (d,e,f) shows solid-associated Fe (II), and the bottom row (g,h,i) shows all Fe(II). Note the different scales on the y-axis.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 4 9 e1 0 6 2
Biogenic Fe(II) production after ferrous sulfate or ferrozine addition 0.3
Ratio of biogenic solid & aqueous Fe(II) to Fe(total) 0.15
0
0
1
2
3
Time (days) Control
AQDS control
8 mM FeSO4
AQDS + 8 mM FeSO4
0.8 mM FeSO4
AQDS + 0.8 mM FeSO4
Ferrozine
AQDS + Ferrozine
Fig. 4 e Biogenic ferrous iron time series from the experiments in Figure 3. This graph subtracts FeSO4 additions to strictly display only biogenic ferrous iron, referenced against control experiments with no FeSO4 or ferrozine (black symbols). Symbols are data (< ±5%), and lines are present to guide the eye.
the corollary that the direct formation of solid-associated ferrous iron is the primary product of iron reduction in this system. Indeed, other research supports this concept; Wilkins et al. (2007) found evidence to support the idea that electrons transferred from G. sulfurreducens to ferrihydrite reduce iron ions buried deep in the mineral structure, which cannot dissolve until overlying layers of ferric ions are reduced. So, while the accumulation of Fe(II) on oxide surfaces may be responsible for the cessation of iron reduction, our results show that solid-associated Fe(II) on these surfaces is not biogenic Fe2þ that has re-adsorbed, which is, for example, the conceptual model of Hansel et al. (2003). Rather, the present results suggest a direct Fe(III)s to Fe(II)s transformation. Why, then, is aqueous ferrous iron present? The answer may be rooted in the relative stability of newly minted solidassociated ferrous iron ions. Such ferrous ions may be unstable in bonds that constrained the same ions in ferric form. Ultimately, unstable ferrous ions transform to other, more stable solids, as found in other studies (e.g. Fredrickson et al., 1998; Islam et al., 2005; Liu et al., 2001), or dissolve into porewater as aqueous ferrous iron. Capturing the rates of these transformations is difficult, and in this model these transformations are simplified so that newly minted ferrous ions are modeled as either stable or unstable.
Table 1 e Effect of ferrous sulfate. Iron reduction is deemed inhibited by FeSO4 if the rate or extent of iron reduction is significantly different from the control experiment. 0.8 mM e e X X
8 mM
AQDS
Inhibited?
X X e e
X e e X
No Yes No No
1057
According to the above assumptions, a fraction of the open surface sites that transform to ferrous solids is subsequently released into the aqueous phase. But what happens to the pool of open surface sites when a ferrous ion is released into the porewater? It is reasonable to suppose that, provided there are sufficient ferric ions, a new site is exposed upon ferrous dissolution. This leads to a simple rule: if a newly reduced ferrous iron ion stays in the solid matrix, the amount of open surface sites is diminished by one ion but if, on the other hand, a newly reduced ferrous iron ion is released into the aqueous phase, then a new ferric iron ion is exposed and the amount of open surface sites remains the same. This approach treats dissolved ferrous iron as a byproduct of iron reduction, in keeping with the observations and discussion above. Fig. 5 schematically represents this process. To express this simple rule in a mathematical form, the percent of ferrous iron that is not freed is assigned a value, Pnf, and the percent that is freed into the aqueous phase is also assigned a value, Pf, such that Pnf þ Pf ¼ 1. To keep mass balance, the total iron in the system always exceeds the sum of the solid-associated ferrous iron produced, Feo ðt ¼ 0Þ Feo ðtÞ, plus the aqueous ferrous iron, Feaq. Since Feo is expressed as a fraction of total iron, the mass balance becomes 1 Feo ðt ¼ 0Þ Feo ðtÞ þ Feaq ðtÞ:
(8)
This conceptual model ignores atomic exchange between aqueous and solid phase. Recent experiments tracking 56Fe/ 57Fe demonstrate a near-complete exchange of Fe between aqueous Fe(II) and Fe(III) atoms in goethtite (Handler et al., 2009). Such exchange, however, would necessarily be oneto-one and, therefore unlikely to significantly affect the rate or reduction. Solid-state electron transfer from Fe(II) through solid Fe(III) may also play a role (Yanina and Rosso, 2008). Fully quantitative experimental tracking of such electron transfers is difficult, if not impossible. This one-to-one transfer occurs in at least two steps, the initial transfer from cell to surface, then one or more intra-crystal transfers. As electrons move deeper into the crystal, previously ferrous surface sites become ferric, and, therefore, bioavailable. In this way, intracrystal electron transfer effectively extends the bioavailable iron, Feo (t ¼ 0), to ions buried in the crystal, and because the model tracks bioavailable iron this intra-crystal electron transfer is implicit in the model assumptions. In reality, a onestep electron transfer from cell to surface may be faster than a multi-step electron transfer from cell to surface to subsurface ferric ions, but the model captures a global transfer rate, which is the experimentally measurable rate. Having developed a framework based on bioavailable ferric iron, the discussion now turns to surface loading effects of bacterial biomass. The model needs a function that reflects that, at some point, adding more bacteria does not increase the rate of iron reduction. The function GðBÞ ¼
B ; Kb þ B
(9)
where B is the biomass in cells per mmole Fe(III), and Kb is a constant with the same units, expresses the concept of saturation. As B/N; G/1. With this function, the model is now complete, and Table 2 presents the full model equations.
1058
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 4 9 e1 0 6 2
e- + Fe(III)open
Fe2+(aq)
New Fe(III) site exposed; no net change of Fe(III)open
Fe(II)(s)
Loss of one Fe(III)open site
Fig. 5 e Conceptual model of ferric iron reduction. An open surface site (Fe(III)open) receives an electron (eL) from acetate or AQDS and transforms to either dissolved ferrous iron (Fe2+(aq)), thus exposing a new Fe(III) surface site, or transforms to solid ferrous iron (Fe(II)(s)), thus effectively eliminating one Fe(III) site from the pool of open surface sites.
In summary, the model assumptions are: the iron reduction rate is proportional to the open ferric iron sites from a pool of bioavailable ferric iron, Feo(t), which is not necessarily the first layer of ferric ions. there is a fixed amount of bioavailable ferric iron at the start of the experiment, Feo(t ¼ 0) biogenic ferrous iron that is released into the aqueous phase does not deplete the pool of open surface sites and the rate of iron reduction is proportional to Feo ðtÞ,Pnf . If Pf ¼ 1, then Pnf ¼ 0 and reduction occurs at a steady rate until the supply of ferric ions is exhausted. the amount of iron reduced cannot exceed the total amount of iron in the system (Table 2, in eq. (3)). the rate of direct electron transfer from acetate to the surface is proportional to a saturating function of biomass, G(B). the rate of AQDS reduction is proportional to biomass, B, and AQDS concentration. biomass in the experiments is assumed to remain constant (Appendix A), but the model is adaptable to allow biomass to change as a function of time. One could incorporate, for example, growth using the expression BðtÞ ¼ B0 þ Y$FeðIIÞ, where B0 is the initial biomass, Fe(II) is the biogenic iron produced, and Y is a yield coefficient. in the presence of AQDS, the bacterial population simultaneously reduces iron directly via cell-to-surface electron transfer and indirectly via electron shuttling; direct electron transfer occurs at the same rate whether or not the electron shuttle is present.
Table 2 e Model equations.
the rate of electron transfer from AH2QDS to ferric iron is proportional to the open surface sites and to the concentration of AH2QDS. the stoichiometry of iron reduction dictates that two Fe ions reduce for every AH2QDS ion oxidized Note that this model does not account for the re-precipitation of aqueous ferrous as ferrous solids because including such events may over-parameterize the model. The focus of this model is to describe iron reduction, and the experiments with ferrous sulfate spikes suggest that the sorption or precipitation of Fe2þ does not inhibit iron reduction rate at levels experienced during biologically mediated reactions.
4.2.
Model results
The solid lines in Fig. 4 show model results, optimized according to the procedure outlined in the methods section. Table 3 reports parameter values. Although the lsqcurvefit algorithm directly optimized most parameters, the lone exception was the best fit for Pf, the parameter that assigns a percent of reduced iron ions that freely dissolve into the porewater. The estimate for this parameter was biased to be low due to the experimental results, which show a drop in dissolved ferrous iron concentration after an initial rise. This pattern most likely arises from secondary precipitation of ferrous iron, perhaps nucleated by solid-associated biogenic ferrous iron that remains in the crystal as it transforms Fe(III) to Fe(II). Secondary precipitation is not included in the model, which justifies an attempt to counter the optimization bias, so the value of Pf was manually adjusted by a factor of 1.25. After
dFeo ¼ lPnf GðBÞFeo 2aPnf ½AH2 QDSðFeo $FeTOTAL Þ dt
(10)
Table 3 e Model parameter estimates.
dFeaq ¼ lPf GðBÞFeo þ 2aPf ½AH2 QDSðFeo $FeTOTAL Þ dt
(11)
Pf ¼ 0:23
(17)
1 Feo ðt ¼ 0Þ Feo ðtÞ þ Feaq ðtÞ
(12)
Pnf ¼ 0:77
(18)
Pnf þ Pf ¼ 1
(13)
l ¼ 1:24 day1
(19)
B GðBÞ ¼ Kb þ B
(14)
m ¼ 2:61107 ðmL=ðcell,dayÞÞ
(20)
Kb ¼ 1:30107 cell=mmole FeTOTAL
(21)
Feo ð0Þ ¼ 0:51 mmole Feo =mmole FeTOTAL
(22)
a ¼ 1:59103 L2 =ðday$½mM AH2 QDS$½mM FeÞ
(23)
d½AH2 QDS ¼ mBðFeTOTAL =1000Þ½AQDS dt a½AH2 QDSðFeo FeTOTAL Þ
(15)
d½AQDS ¼ mBðFeTOTAL =1000Þ½AQDS dt þa½AH2 QDSðFeo $FeTOTAL Þ
(16)
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 4 9 e1 0 6 2
adjustment, the model predicts aqueous biogenic ferrous iron production that more closely matches the data during the initial part of the reduction experiment. Then, treating dissolved ferrous iron as a passive byproduct of reduction appears to do well in the short-term, before secondary precipitation, but generally overpredicts aqueous ferrous iron concentrations in the long-term, after secondary precipitation. Nevertheless, the results support the basic ferrous iron modeling concepts insofar as the model correctly captures early phase iron reduction, before any secondary precipitation occurs. The model fit for initial open sites Feo(t ¼ 0) is 0.51 mmole Feo/mmole FeTOTAL (Table 3). Dzombak and Morel (1990) recommend a value of 0.2 for the ratio of surface hydroxyl groups to total hydrous ferrous oxides, but these surface groups may not be the only ones involved in the reaction. As Wilkins et al. (2007) show, G. sulfurreducens can transfer electrons to ions deep in the ferrihydrite structure. Yanina and Rosso (2008) show that intra-crystal electron transfer in hematite, and the results here agree with this scenario. While more complex models could account for processes like isotope exchange or solidphase electron transfer, such models would not be justified from experiments that do not accurately track these processes. The bulk rate of reduction is often of interest in biogeochemical models, and the simplified conceptual model presented in this work accurately reproduces experimental data. Fig. 4 clearly presents a diminishing spread in the rate of iron reduction curves as biomass increases, and good agreement between model and data suggests that a saturating biomass function accurately represents the system. As the biomass concentration ranges from values well below Kb to values exceeding the parameter Kb, both the data and the modeled results show curves that display diminishing returns for additional bacteria. Bonneville et al. (2006) employ a similar saturation concept to describe reduction of nanohematite. Idealizing these particles as perfect spheres allows (Bonneville et al., 2006) to derive a half-saturation constant Kb from geometric considerations. Those calculations depend on the ratio of hematite sphere size to the bacterial size, where the iron particles are much smaller than the cell, while the present study involve heterogeneously coated sand particles that are much larger than the cell. Nevertheless, both studies suggest that the saturation concept is valid. Adding the electron shuttle AQDS may seem to partially remove the saturating limitation for low biomass values. Yet at high values, although the rate of reduction is greater with AQDS than without, the rate of reduction saturates. This supports the model assumption that, in the presence of AQDS, the bacterial population simultaneously reduces AQDS and ferric iron through direct electron transfer. So, at low biomass electron shuttling dominates and surface saturation is not important, but at high biomass surface saturation becomes more important. The model fits in Fig. 4 use the same parameters l, Pnf, Pf, Feo(t ¼ 0), and Kb to describe the rate of direct cell-to-surface electron transfers with and without AQDS, strengthening the case that the two pathways coexist. Without this assumption, i.e. not allowing direct iron reduction when AQDS is present, attempts to fit model results to the data produced markedly erroneous predictions (not shown). Researchers have demonstrated that the simultaneous use of two pathways for iron
1059
reduction can occur for another iron reducing bacteria Shewanella oneidensis (Lies et al., 2005), and the results here are the first to demonstrate simultaneous pathways for G. sulfurreducens reducing amorphous iron oxides. Although derived for specific experimental conditions, the model presented here is readily generalized to other bacteria, electron shuttles, and iron oxides. The kinetic form of the equations should remain the same but the parameter values will change. Each iron oxide should have a unique Pf, the probability of freeing a reduced iron atom. Hematite, for example, was shown to be controlled by thermodynamics (Royer et al., 2004) which is due to a difference in the energetics of the reaction and could be exacerbated by a high Pf. Each bacteria-iron oxide combination should have a unique biomass saturation constant, Kb, and maximum reduction rate constant, l. Each electron shuttle-iron oxide combination will have a different rate constant a, and each electron shuttle will have a unique reduction constant m. To generalize for biomass growth the model will accept biomass as a function of time, but needs accurate yield coefficient estimation. The model presented here can also extend to account for multiple pools of open sites, although as currently formulated it only considers fast kinetics. The kinetic profiles of Fig. 4 do not show that iron reduction has completely ceased. To account for this, the model allows for an additive, parallel reactions that includes a second pool of a intractable, slowly reducing sites and follows the exact formulation presented in Table 2. Simultaneous reactions based on two pools of would exist (equations (10)e(16)), with independent parameters and no overlap except that the mass balance would incorporate both pools (equation (2)).
5.
Conclusions
This study presents experimental evidence supporting a new model formulation for bacterially driven iron reduction that uses a biomass surface saturation effect for direct electron transfer from cells to the solid, allows simultaneous direct transfer and transfer via electron shuttle, and treats the primary product of reduction as solid-associated ferrous iron with dissolved iron as a passive byproduct of reduction. Previous experiments testing the surface saturation limitation with S. putrefaciens did not test whether electron shuttles removed the limitation, and previous studies on the role of ferrous iron implicitly or explicitly assume that Fe2þ is the primary product of reduction. The discussion and interpretation of experimental findings in this paper leads to a new model that accurately reproduces experimental trends, suggesting that: a saturating biomass to iron content function best describes iron reduction kinetics, with the half-saturation constant Kb, at 1.30 107 cell/mmole FeTOTAL, which is relevant for biostimulation studies. sorption and thermodynamics of aqueous ferrous iron production cannot explain an abrupt cutoff in iron reduction. While certainly accounting for the observed phenomena in some studies, these explanations do not fully account for the abrupt cutoff in iron reduction in the experiments presented here.
1060
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 4 9 e1 0 6 2
a direct ferrihydrite Fe(III)(S) to Fe(II)(S) transformation best explains the cutoff in iron reduction, leading to a framework that describes iron reduction based on the concept of bioavailable ferric iron. electron shuttles do not remove the biomass surface saturation limitation for G. sulfurreducens mediated ferrihydrite reduction, but acts additively to reduction via direct contact. This novel result suggests that G. sulfurreducens can simultaneously use two pathways to reduce ferrihydrite: direct electron transfer and electron transfer via electron shuttle.
G. sulfurreducens grows via reaction (5) without AQDS or via reaction (3) with AQDS. Reaction (4) occurs abiotically. MINTEQ calculations give a bicarbonate concentration of 1 mM for these batch vials. Using thermodynamic tables and conventional methods to calculate energetics at pH 7 and 1 mM bicarbonate, DG0 ¼ 0.41 kJ per millimole acetate, DG1 ¼ 0.058 kJ per millimole acetate, and DG3 ¼ 0.23 kJ per millimole acetate (Bethke, 1996; Morel and Hering, 1993; Rosso et al., 2004). An assumption of equal energetic efficiency for all substrates leads to: 3þ
Fe Ycell=kJ ¼ Ycell=c
Acknowledgements This work was supported by EPA-STAR Graduate Research Fellowship #F5A20133, the School of Engineering and Applied Sciences Upton Fellowship at Princeton University, and the National Science Foundation EAR-0337687.
Appendix. Estimates of biomass change These experiments were designed so that biomass remains constant, but sediment particles prevented accurate cell counts after inoculation to directly verify constant biomass. So, one must estimate the biomass population changes using reasonable assumptions and a published model. In the absence of alternatives, it is reasonable to apply the Monod model to the present system with the simplification that ferrihydrite concentration is the liquid equivalent (millimoles ferrihydrite per liter), an approach used in other studies (Burnol et al., 2007). Then, to predict whether biomass remains constant here, one can examine two hypothetical extreme cases: (i) maximum cell growth without cell death, and (ii) cell death without cell growth. A test of the first case requires an estimate of the rate of G. sulfurreducens growing via a ferrihdyrite/acetate redox couple and via an AQDS/acetate redox couple, which have not been directly reported. However, parameters measured in experiments with other substrates can help estimate cell growth for this redox couple. Prima facie it is reasonable to assume that the cell yield remains constant on an energetic basis, i.e. the increase in cells per kJ released by a redox reaction remains constant as G. sulfurreducens switches from one electron acceptor to another while keeping acetate as the donor. This approach neglects cell maintenance energy requirements, so this approach overestimates yield. Brown et al. (2005) report the growth rate of G. sulfurreducens growing via a ferric citrate/acetate redox couple in a nutrient rich media. In the present study, G. sulfurreducens mediates ferrihydrite or AQDS reduction in a minimal artificial groundwater media, which is likely to be less efficient, so the assumption that G. sulfurreducens grows equally well here on an energetic basis leads to a maximum estimate of cell growth. Experiments presented in (Brown et al., 2005) use ferric citrate as the Fe(III) source and follow the reaction 2þ þ 8Fe3þ ðaqÞ þ CH3 COO /8FeðaqÞ þ 9H þ 2e3 ; DG0 ;
(A.1)
while experiments in the present study follow equations (5)e(7) in the main body of this paper. G. sulfurreducens grows via reaction A.1 in (Brown et al., 2005), but in the present study
1 ; DG0
FeOOH Ycell=c ¼ Ycell=kJ ðDG3 Þ;
(A.2)
(A.3)
and AQDS ¼ Ycell=kJ ðDG1 Þ: Ycell=c
(A.4)
Here, Y is a yield coefficient as in equation (2), where superscripts indicates the electron acceptor and subscripts indicate the units of Y, which are either cells per millimole acetate or cells per kJ. Plugging this into equation (2) gives 3þ
FeOOH=c Fe =c mmax ¼ mmax
DG3 ; DG0
(A.5)
and 3þ
AQDS=c Fe =c mmax ¼ mmax
DG1 : DG0
(A.6)
Brown et al. (2005) report that KcS ¼ 0:124 mM acetate and 1 ¼ 0:00184 mM1 hr . That study found that growth was linear with respect to ferric iron concentration, Fe3þ =c =KFe3þ but not separate values for and resolves the ratio mmax Fe3þ =c mmax or KFe3þ . This can be interpreted as a special case of MichaeliseMenten uptake kinetics where Fe3þ KFe3þ . Fe3þ =c =KFe3þ mmax
KFe3þ zKFeOOH zKAQDS ;
(A.7)
which is reasonable since half-saturation constants ðKs Þ are largely determined by the cell radius (Liu et al., 2003). Because Fe3þ in Brown et al. (2005) is 50 mM, which is much larger than the concentration of AQDS or FeOOH in the present study, and this half-saturation constant is larger still, one can further assume that all half-saturation constants are much larger than the concentration of AQDS and FeOOH and that growth is linear with respect to these two compounds. Acetate concentration is not limiting the concentration in these experiments (10 mM), because CH3 COO ¼ :987z1: Kc þ CH3 COO
(A.8)
Then, under the maximum growth with no cell death test case, the Monod equation (1) becomes: FeOOH=c dB mmax ðFeOOHÞB; ¼ KFeOOH dt
(A.9)
and AQDS=c dB mmax ðAQDSÞB: ¼ KAQDS dt
(A.10)
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 4 9 e1 0 6 2
Using the assumptions and relationships developed in equations (A.5)e(A.8) one finds that 3þ
Fe =c dB mmax DG3 ðFeOOHÞB; ¼ KFe3þ DG0 dt
(A.11)
and 3þ
Fe =c dB mmax DG3 ðAQDSÞB: ¼ KFe3þ DG0 dt
(A.12)
Cell growth rate is maximum at the initial concentrate of FeOOH or AQDS, and fixing FeOOH and AQDS at the initial levels makes equations A.11 and A.12 ordinary differential equations with the following solutions: !# " Fe3þ =c mmax DG3 FeOOH t ; (A.13) BðtÞ=Bð0Þ ¼ exp KFe3þ DG0 and
"
BðtÞ=Bð0Þ ¼ exp
!# Fe3þ =c mmax DG3 AQDS t ; KFe3þ DG0
(A.14)
Then, plugging in the values for these experiments (w5 mM FeOOH, 150 mM AQDS), one finds that biomass growth is 1.0% for experiments without AQDS and 7.7% with AQDS over 72 h. For the other extreme case, cell death without cell growth, equation (1) leads to BðtÞ=Bð0Þ ¼ Bð0Þebt :
(A.15) e1
From b ¼ 0.00042 h , as in Brown et al. (2005), equation A.15 predicts a loss of 3.0% biomass over 72 h. Therefore, these two extreme hypothetical cases of maximum cell growth or maximum cell death suggest that biomass remains constant throughout all experiments presented here. The moderate case, including growth and death, is the sum of the extremes, suggesting þ4.4% change in experiments with AQDS and 2.0% change in experiments without AQDS. A second method to estimate biomass change in these experiments leads to similar conclusions. Instead of employing the Monod model, one can use the simple equation of linear growth BðtÞ ¼ Bð0Þ þ Ycell=kJ DG½Sð0Þ SðtÞ Bð0Þebt ;
(A.16)
where Ycell/kJ is as defined in equation A.2, DG is the kJ per mole electron acceptor, the substrate S(t) is either AQDS or FeOOH as measured in the experiments, and b is the decay coefficient. Growth estimates are higher using this approach, ranging from 1% to 40% for experiments without AQDS, and from 3% to 256% in experiments with AQDS. This approach is less robust than the Monod approach outlined above. But, to be conservative, experiments with the lowest initial biomass and AQDS will not be used for model fitting because the linear model predicts dramatic growth for these experiments.
references
Aksnes, D., Egge, J., 1991. A theoretical model for nutrient uptake in phytoplankton. Marine Ecology Progress Series 70 (1), 65e72.
1061
Anderson, R.T., Vrionis, H.A., Ortiz-Bernad, I., Resch, C.T., Long, P.E., Dayvault, R., Karp, K., Marutzky, S., Metzler, D.R., Peacock, A., White, D.C., Lowe, M., Lovley, D.R., 2003. Stimulating the in situ activity of Geobacter species to remove uranium from the groundwater of a uranium-contaminated aquifer. Applied and Environmental Microbiology 69 (10), 5884e5891. Benner, S.G., Hansel, C.M., Wielinga, B.W., Barber, T.M., Fendorf, S., 2002. Reductive dissolution and biomineralization of iron hydroxide under dynamic flow conditions. Environmental Science & Technology 36 (8), 1705e1711. Bennett, B., Dudas, M.J., 2003. Release of arsenic and molybdenum by reductive dissolution of iron oxides in a soil with enriched levels of native arsenic. Journal of Environmental Engineering and Science 2 (4), 265e272. Bethke, C., 1996. Geochemical Reaction Modeling: Concepts and Applications. Oxford University Press, USA. Blute, N.K., Brabander, D.J., Hemond, H.F., Sutton, S.R., Newville, M.G., Rivers, M.L., 2004. Arsenic sequestration by ferric iron plaque on cattail roots. Environmental Science & Technology 38 (22), 6074e6077. Bonneville, S., Behrends, T., Van Cappellen, P., Hyacinthe, C., Roling, W.F.M., 2006. Reduction of Fe(III) colloids by Shewanella putrefaciens: a kinetic model. Geochimica Et Cosmochimica Acta 70 (23), 5842e5854. Bonneville, S., Van Cappellen, P., Behrends, T., 2004. Microbial reduction of iron(III) oxyhydroxides: effects of mineral solubility and availability. Chemical Geology 212 (3e4), 255e268. Brooks, S.C., Taylor, D.L., Jardine, P.M., 1996. Reactive transport of EDTA-complexed cobalt in the presence of ferrihydrite. Geochimica Et Cosmochimica Acta 60 (11), 1899e1908. Brown, D.G., Komlos, J., Jaffe´, P.R., 2005. Simultaneous utilization of acetate and hydrogen by Geobacter sulfurreducens and implications for use of hydrogen as an indicator of redox conditions. Environmental Science & Technology 39 (9), 3069e3076. Burgos, W.D., Fang, Y.L., Royer, R.A., Yeh, G.T., Stone, J.J., Jeon, B.H., Dempsey, B.A., 2003. Reaction-based modeling of quinonemediated bacterial iron(III) reduction. Geochimica Et Cosmochimica Acta 67 (15), 2735e2748. Burnol, A., Garrido, F., Baranger, P., Joulian, C., Dictor, M., Bode´nan, F., Morin, G., Charlet, L., 2007. Decoupling of arsenic and iron release from ferrihydrite suspension under reducing conditions: a biogeochemical model. Geochemical Transactions 8 (1), 12. Cardenas, E., Wu, W.-M., Leigh, M.B., Carley, J., Carroll, S., Gentry, T., Luo, J., Watson, D., Gu, B., Ginder-Vogel, M., Kitanidis, P.K., Jardine, P.M., Zhou, J., Criddle, C.S., Marsh, T.L., Tiedje, J.A., 2008. Microbial communities in contaminated sediments, associated with bioremediation of uranium to submicromolar levels. Applied and Environmental Microbiology 74 (12), 3718e3729. Coker, V.S., Bell, A.M.T., Pearce, C.I., Pattrick, R.A.D., van der Laan, G., Lloyd, J.R., 2008. Time-resolved synchrotron powder X-ray diffraction study of magnetite formation by the Fe(III)reducing bacterium Geobacter sulfurreducens. American Mineralogist 93 (4), 540e547. Cutting, R., Coker, V., Fellowes, J., Lloyd, J., Vaughan, D., 2009. Mineralogical and morphological constraints on the reduction of Fe(III) minerals by Geobacter sulfurreducens. Geochimica Et Cosmochimica Acta 73 (14), 4004e4022. Dzombak, D.A., Morel, F., 1990. Surface Complexation Modeling: Hydrous Ferric Oxide. Wiley, New York. Fredrickson, J.K., Zachara, J.M., Kennedy, D.W., Dong, H.L., Onstott, T.C., Hinman, N.W., Li, S.M., 1998. Biogenic iron mineralization accompanying the dissimilatory reduction of hydrous ferric oxide by a groundwater bacterium. Geochimica Et Cosmochimica Acta 62 (19e20), 3239e3257.
1062
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 4 9 e1 0 6 2
Fredrickson, J.K., Zachara, J.M., Kukkadapu, R.K., Gorby, Y.A., Smith, S.C., Brown, C.F., 2001. Biotransformation of Nisubstituted hydrous ferric oxide by an Fe(III)-reducing bacterium. Environmental Science & Technology 35 (4), 703e712. Guha, S., Jaffe´, P.R., 1996. Determination of monod kinetic coefficients for volatile hydrophobic organic compounds. Biotechnology and Bioengineering 50 (6), 693e699. Hacherl, E.L., Kosson, D.S., Cowan, R.M., 2003. A kinetic model for bacterial Fe(III) oxide reduction in batch cultures. Water Resources Research 39 (4), 1098e1115. Handler, R., Beard, B., Johnson, C., Scherer, M., 2009. Atom exchange between aqueous Fe (II) and goethite: an Fe isotope tracer study. Environmental Science & Technology 43 (4), 1102e1107. Hansel, C.M., Benner, S.G., Fendorf, S., 2005. Competing Fe(II)induced mineralization pathways of ferrihydrite. Environmental Science & Technology 39 (18), 7147e7153. Hansel, C.M., Benner, S.G., Neiss, J., Dohnalkova, A., Kukkadapu, R.K., Fendorf, S., 2003. Secondary mineralization pathways induced by dissimilatory iron reduction of ferrihydrite under advective flow. Geochimica Et Cosmochimica Acta 67 (16), 2977e2992. Huang, C.Y., Zhou, R.X., Yang, D.C.H., Chock, P.B., 2003. Application of the continuous variation method to cooperative interactions: mechanism of Fe(II)-ferrozine chelation and conditions leading to anomalous binding ratios. Biophysical Chemistry 100 (1e3), 143e149. Islam, F.S., Pederick, R.L., Gault, A.G., Adams, L.K., Polya, D.A., Charnock, J.M., Lloyd, J.R., 2005. Interactions between the Fe (III)-reducing bacterium Geobacter sulfurreducens and arsenate, and capture of the metalloid by biogenic Fe(II). Applied and Environmental Microbiology 71 (12), 8642e8648. Jiang, J., Kappler, A., 2008. Kinetics of microbial and chemical reduction of humic substances: implications for electron shuttling. Environmental Science & Technology 42 (10), 3563e3569. Komlos, J., Jaffe´, P.R., 2004. Effect of iron bioavailability on dissolved hydrogen concentrations during microbial iron reduction. Biodegredation 15 (5), 315e325. Komlos, J., Peacock, A., Kukkadapu, R.K., Jaffe, P.R., 2008. Longterm dynamics of uranium reduction/reoxidation under low sulfate conditions. Geochimica Et Cosmochimica Acta 72 (15), 3603e3615. Lies, D.P., Hernandez, M.E., Kappler, A., Mielke, R.E., Gralnick, J.A., Newman, D.K., 2005. Shewanella oneidensis MR-1 uses overlapping pathways for iron reduction at a distance and by direct contact under conditions relevant for biofilms. Applied and Environmental Microbiology 71 (8), 4414e4426. Lisle, J.T., Hamilton, M.A., Willse, A.R., McFeters, G.A., 2004. Comparison of fluorescence microscopy and solid-phase cytometry methods for counting bacteria in water. Applied and Environmental Microbiology 70 (9), 5343e5348. Liu, C.X., Kota, S., Zachara, J.M., Fredrickson, J.K., Brinkman, C.K., 2001. Kinetic analysis of the bacterial reduction of goethite. Environmental Science & Technology 35 (12), 2482e2490. Liu, Y., Lin, Y.M., Yang, S.F., 2003. A thermodynamic interpretation of the Monod equation. Current Microbiology 46 (3), 233e234. Lovley, D.R., 2008. Extracellular electron transfer: wires, capacitors, iron lungs, and more. Geobiology 6 (3), 225e231. Lovley, D.R., Holmes, D.E., Nevin, K.P., 2004. Dissimilatory Fe(III) and Mn(IV) reduction. Advances in Microbial Physiology 49, 219e286. Lovley, D.R., Phillips, E.J.P., 1988. Novel mode of microbial energymetabolism - organic-carbon oxidation coupled to dissimilatory reduction of iron or manganese. Applied and Environmental Microbiology 54 (6), 1472e1480. Moon, H.S., McGuiness, L., Kukkadapu, R.K., Peacock, A.D., Komlos, J., Kerkhof, L., Long, P.E., Jaffe´, P.R., 2010. Microbial
reduction of uranium under iron- and sulfate-reducing conditions: effect of amended goethite on microbial community composition and dynamics. Water Research 44 (14), 4015e4028. Morel, F., Hering, J., 1993. Principles and Applications of Aquatic Chemistry. Wiley-Interscience. Nevin, K., Kim, B., Glaven, R., Johnson, J., Woodard, T., Methe´, B., DiDonato Jr., R., Covalla, S., Franks, A., Liu, A., Lovley, D.R., 2009. Anode biofilm transcriptomics reveals outer surface components essential for high density current production in Geobacter sulfurreducens fuel cells. PLoS One 4 (5). Reguera, G., McCarthy, K.D., Mehta, T., Nicoll, J.S., Tuominen, M.T., Lovley, D.R., 2005. Extracellular electron transfer via microbial nanowires. Nature 435 (7045), 1098e1101. Reguera, G., Pollina, R.B., Nicoll, J.S., Lovley, D.R., 2007. Possible nonconductive role of Geobacter sulfurreducens pilus nanowires in biofilm formation. Journal of Bacteriology 189 (5), 2125e2127. Roden, E.E., 2006. Geochemical and microbiological controls on dissimilatory iron reduction. Comptes Rendus Geoscience 338 (6e7), 456e467. Roden, E.E., Urrutia, M.M., 1999. Ferrous iron removal promotes microbial reduction of crystalline iron(III) oxides. Environmental Science & Technology 33 (11), 1847e1853. Rosso, K., Smith, D., Wang, Z., Ainsworth, C., Fredrickson, J., 2004. Self-exchange electron transfer kinetics and reduction potentials for anthraquinone disulfonate. Journal of Physical Chemistry A 108 (16), 3292e3303. Rosso, K., Zachara, J., Fredrickson, J., Gorby, Y., Smith, S., 2003. Nonlocal bacterial electron transfer to hematite surfaces. Geochimica Et Cosmochimica Acta 67 (5), 1081e1087. Royer, R., Burgos, W., Fisher, A., Unz, R., Dempsey, B., 2002a. Enhancement of biological reduction of hematite by electron shuttling and Fe(II) complexation. Environmental Science & Technology 36 (9), 1939e1946. Royer, R.A., Burgos, W.D., Fisher, A.S., Jeon, B.-H., Unz, R.F., Dempsey, B.A., 2002b. Enhancement of hematite bioreduction by natural organic matter. Environmental Science & Technology 36 (13), 2897e2904. Royer, R.A., Dempsey, B.A., Jeon, B.H., Burgos, W.D., 2004. Inhibition of biological reductive dissolution of hematite by ferrous iron. Environmental Science & Technology 38 (1), 187e193. Scott, D., McKnight, D., Blunt-Harris, E., Kolesar, S., Lovley, D., 1998. Quinone moieties act as electron acceptors in the reduction of humic substances by humics-reducing microorganisms. Environmental Science & Technology 32 (19), 2984e2989. Smith, S., Jaffe´, P., 1998. Modeling the transport and reaction of trace metals in water-saturated soils and sediments. Water Resources Research 34 (11), 3135e3147. Stookey, L.L., 1970. Ferrozine - a new spectrophotometric reagent for iron. Analytical Chemistry 42 (7), 779e781. Wang, S., Jaffe, P., Li, G., Wang, S., Rabitz, H., 2003. Simulating bioremediation of uranium-contaminated aquifers; uncertainty assessment of model parameters. Journal of Contaminant Hydrology 64 (3e4), 283e307. Wilkins, M.J., Wincott, P.L., Vaughan, D.J., Livens, F.R., Lloyd, J.R., 2007. Growth of Geobacter sulfurreducens on poorly crystalline Fe(III) oxyhydroxide coatings. Geomicrobiology Journal 24 (3e4), 199e204. Wolf, M., Kappler, A., Jiang, J., Meckenstock, R.U., 2009. Effects of humic substances and quinones at low concentrations on ferrihydrite reduction by Geobacter metallireducens. Environmental Science & Technology 43 (15), 5679e5685. Yanina, S.V., Rosso, K.M., 2008. Linked reactivity at mineral-water interfaces through bulk crystal conduction. Science 320 (5873), 218e222.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 6 3 e1 0 7 0
Available at www.sciencedirect.com
journal homepage: www.elsevier.com/locate/watres
Investigating synergism during sequential inactivation of MS-2 phage and Bacillus subtilis spores with UV/H2O2 followed by free chlorine Min Cho a, Varun Gandhi a, Tae-Mun Hwang b, Sangho Lee b, Jae-Hong Kim a,* a
School of Civil and Environmental Engineering, Georgia Institute of Technology, 200 Bobby Dodd Way, Atlanta, GA 30332-0373, USA Environmental Research Division, Korea Institute of Construction Technology, 2311 Daehwa-Dong, Ilsanseo-Gu, Goyang-Si, Gyeonggi-Do 411-712, South Korea b
article info
abstract
Article history:
A sequential application of UV as a primary disinfectant with and without H2O2 addition
Received 6 May 2010
followed by free chlorine as secondary, residual disinfectant was performed to evaluate the
Received in revised form
synergistic inactivation of selected indicator microorganisms, MS-2 bacteriophage and
8 October 2010
Bacillus subtilis spores. No synergism was observed when the UV irradiation treatment was
Accepted 14 October 2010
followed by free chlorine, i.e., the overall level of inactivation was the same as the sum of
Available online 5 November 2010
the inactivation levels achieved by each disinfection step. With the addition of H2O2 in the primary UV disinfection step, however, enhanced microbial inactivation was observed. The
Keywords:
synergism was observed in two folds manners: (1) additional inactivation achieved by
MS-2 phage
hydroxyl radicals generated from the photolysis of H2O2 in the primary UV disinfection
Bacillus subtilis spores
step, and (2) damage to microorganisms in the primary step which facilitated the subse-
UV
quent chlorine inactivation. Addition of H2O2 in the primary disinfection step was also
H2O2
found to be beneficial for the degradation of selected model organic pollutants including
Advanced oxidation process (AOP)
bisphenol-A (endocrine disruptor), geosmin (taste and odor causing compound) and 2,4-D
Free chlorine
(herbicide). The results suggest that the efficiency of UV/free chlorine sequential disin-
Sequential disinfection
fection processes, which are widely employed in drinking water treatment, could be
Synergism
significantly enhanced by adding H2O2 in the primary step and hence converting the UV process to an advanced oxidation process. ª 2010 Elsevier Ltd. All rights reserved.
1.
Introduction
Since the discovery that UV light efficiently inactivates Cryptosporidium parvum oocysts (Bolton et al., 1998; Bukhari et al., 1999; Clancy et al., 1998; Shin et al., 2001) and Giardia lamblia cysts (Craik et al., 2000; Linden et al., 2002) at relatively low doses, an increasing number of utilities across Europe and North America have installed UV processes for drinking water disinfection in the past decade. This trend is expected to continue, since the UV process is considered as the most cost
effective technology to control C. parvum oocysts and G. lamblia cysts (USEPA, 2006), and by the development of UV-based advanced oxidation processes (AOPs) that effectively treat taste and odor causing compounds (Rosenfeldt et al., 2005) and various organic pollutants (Stefan and Bolton, 1998). This process transpires via the generation of highly reactive hydroxyl radicals (OH) during the UV photolysis of hydrogen peroxide (H2O2) that is additionally added to the UV process. Since the UV irradiation treatment does not leave a residual, secondary application of free chlorine (or combined chlorine)
* Corresponding author. Tel.: þ1 404 894 2216; fax: þ1 404 385 7087. E-mail address:
[email protected] (J.-H. Kim). 0043-1354/$ e see front matter ª 2010 Elsevier Ltd. All rights reserved. doi:10.1016/j.watres.2010.10.014
1064
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 6 3 e1 0 7 0
as a residual disinfectant is often required for water distribution. Application of free chlorine is also instrumental in further inactivating viruses such as adenovirus (USEPA, 2006), norovirus (Shin and Sobsey, 2008), hepatitis A virus (Grabow et al., 1983), and Norwalk virus (Keswick et al., 1985) that are relatively resistant to the UV irradiation treatment (USEPA, 2006). The UV irradiation treatment followed by the addition of chlorine is one example of many sequential disinfection processes; different disinfectant combinations have been investigated and are currently practiced such as using ozone, chlorine dioxide, free chlorine, or UV as the primary disinfectant and free chlorine or monochloramine as the secondary disinfectant (Cho et al., 2003b, 2006; CoronaVasquez et al., 2002; Rennecker et al., 2000). In a sequential disinfection scheme, a strong primary disinfectant is first applied to achieve a portion of the target inactivation level followed by the secondary disinfectant to attain further inactivation and to provide residual disinfection for water distribution. When disinfectants are applied consecutively, it is often found that the overall inactivation level achieved is greater than the sum of the inactivation levels achieved when each disinfectant is applied independently (as separate single-step disinfection processes). For instance, the sequential application of ozone (or ozone/H2O2) followed by free chlorine (Cho et al., 2006) was shown to achieve a higher level of inactivation of Bacillus subtilis spores than the sum of the inactivation level achieved with individual ozone (or ozone/ H2O2) and free chlorine application. This enhanced inactivation is referred to as a synergism, which is beneficial since it leads to a reduction in the amount of disinfectant and reaction time as well as a potential decrease in the formation of disinfection by-products (Rennecker et al., 2000). However, there are few reports in the literature regarding the synergism involved in sequential disinfection processes employing UV or UV/H2O2 followed by free chlorine. While some literature suggested that synergism was not observed in the sequential disinfection processes employing UV alone in the primary step (i.e., MS-2 bacteriophage: Shang et al., 2007; B. subtilis spores: Cho et al., 2006), no literature is available for the sequential disinfection scheme with the UV irradiation as the primary step to which H2O2 is added. The objective of this study is, therefore, to evaluate a potential synergistic effect during the sequential application of the UV/H2O2 disinfection process followed by free chlorine and to compare quantitatively with the UV irradiation (without H2O2) followed by free chlorine. MS-2 bacteriophage and B. subtilis spores, which are frequently used as indicators for UV biodosimetry (USEPA, 2006), were employed as surrogates for human enteric viruses (Dawson et al., 2005; USEPA, 2006) and Bacillus anthracis (Cho et al., 2003b; Larson and Marin˜as, 2003), respectively.
2.
Materials and methods
2.1.
Preparation of MS-2 phages and B. subtilis spores
MS-2 phage (ATCC 15597-B1) stocks were prepared by the soft agar overlay (double-agar layer) method (Cho et al., 2005; Sjogren and Sierka, 1994) using a mutant strain of Escherichia
coli C3000 (ATCC 15597) as the host. The growth broth of E. coli C3000 contained 1.3% tryptone, 1% glucose, 1% MgSO4, 1% CaCl2, and 0.8% NaCl. The host was used in the exponential to early stationary phase for the plaque assay, and the host lawn medium was incubated overnight at 37 C. Suspensions of B. subtilis spores (ATCC 6633) were prepared following the procedure by Nakayama et al. (1996), except for minor modifications such as using a 1/10 diluted nutrient agar and providing an extended incubation period of 5e7 days (Cho et al., 2003a). In brief, a freeze-dried pellet of B. subtilis spores was rehydrated aseptically using a nutrient broth (Difco Co., USA) and incubated at 37 C for 18 h. The cells were then harvested from the broth by repeating centrifugation at 3500 g for 10 min and resuspension in 50 mL of 150 mM phosphate buffered saline (PBS) at pH 7.2 twice. Several 47mm sterile Petri dishes containing 1/10 diluted nutrient agar (0.8 g/L Nutrient Broth þ 15 g/L Bacto Agar, Difco Co., USA) were subsequently inoculated and incubated at 37 C for 5e7 days to induce sporulation. After incubation, B. subtilis spores were collected into 50 mL conical tubes by rinsing the agar with 150 mM PBS and cleaned by repeating centrifugation at 3500 g for 10 min and resuspension in PBS three times. The recovery of spores from each centrifugation and resuspension was over 99%. In order to inactivate any remaining vegetative cells, the stock suspension was heat treated at 80 C for 15 min before each experiment.
2.2.
Experimental procedure
Ultrapure water (>18 MU) prepared by a Milli-Q water purification system (Millipore, Billerica, MA) and analytical reagent grade chemicals (Aldrich Co., USA) were used to prepare all the experimental solutions. All glassware was cleaned with distilled water and further sterilized by autoclaving at 121 C for 15 min. The test suspension (10 mM PBS at pH 7.0) contained 3 106 pfu/mL MS-2 phages or 3 106 cfu/mL B. subtilis spores. The concentration of H2O2 was varied from 0 to 0.6 mM. For selected single-step disinfection experiments, test suspensions contained p-chlorobenzoic acid ( pCBA) as OH probe compound and 350 mg/L of 4,40 -dihydroxy-2,2-diphenylpropane (bisphenol-A), 2,4-dichlorophenoxyacetic acid (2,4-D) and geosmine as model organic contaminants. Primary disinfection with UV or UV/H2O2 was performed using a bench-scale collimated-beam UV reactor equipped with 15-W low-pressure UV lamps (Philips Co., Netherlands), emitting nearly monochromatic UV radiation at 253.7 nm (Bolton and Linden, 2001). This equipment introduced parallel UV light to experimental reactor through a 60 50 cm long collimating tube placed below the UV lamps. The experiments were conducted following the procedure described by Bolton and Linden (2003). Prior to the experiment, the UV lamps were turned on for 10 min. The experiments were initiated once a 80 45 mm sterile Petri dish containing 40 mL experimental suspension was placed normal to the incident UV light. The depth of suspension was approximately 1 cm and the UV intensity at 254 nm at surface of suspension was measured using a radiometer equipped with a UV 254 detector (UVX Radiometer, UVP Co., USA). The UV absorbance of experimental suspension containing phosphate buffer, target microorganisms, and/or H2O2 was measured using a UV/Vis
1065
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 6 3 e1 0 7 0
spectrophotometer (Agilent 8453, Agilent Co., Germany) and the average light intensity (Bolton and Linden, 2003) in the suspension was determined to be 0.38 mW/cm2. Sample aliquots (1 mL) were withdrawn from the reactor at various reaction times. Temperature was controlled at 20 C throughout the experiments. Sequential disinfection was performed using the suspension obtained from the above UV or UV/H2O2 experiments. After the primary disinfection achieved 1 log inactivation, the sample suspension was immediately separated using a membrane (0.02 mm hollow-fiber membrane, H2L Co., South Korea) and washed and re-suspended in 10 mM PBS. The recovery of phages and spores from each filtration was over 99.9%. Secondary disinfection was carried out in a 50 mL batch reactor by adding various amounts of free chlorine (sodium hypochlorite, Junsei Co., Japan) from 0.1 to 3 mg/L as active free chlorine. At various reaction times, the residual free chlorine was instantaneously quenched with sodium thiosulfate (Na2S2O3) and samples were collected for viability assessment. All disinfection experiments were repeated three times.
2.3.
Analytical methods
For viability assessments, samples were serially diluted up to a 1/10,000 dilution ratio using 150 mM PBS at pH 7.1. Aliquots of dilutes (0.4 mL for MS-2 phages and 0.1 mL for B. subtilis spores) were inoculated onto three replicate 47-mm sterile Petri dishes containing nutrient agar (and host E. coli for MS-2 phage). Plaque forming unit for MS-2 phage and colony forming units for subtilis spores were counted after incubation at 37 C for 24 h. Selection of statistically meaningful plate counts was carried out according to Standard Methods (APHA et al., 1999). Concentrations of H2O2 and free chlorine were measured based on a titanium sulfate method and N,N-diethyl-p-phenylene diamine (DPD) colorimetric method, respectively, using a UV/ vis spectrophotometer (Agilent 8453, Agilent Co, Germany) (Cho et al., 2006). Concentrations of pCBA, bisphenol-A, and 2, 4-D were determined using a HewlettePackard 1100 HPLC system (Wilmington, DE) equipped with a C18 reverse-phase column (XTerra Rp-18 reverse-phase column) using
acetonitrile as the eluent. Geosmine concentrations were determined by an Agilent 6890 GC/MS equipped with a purge and trap and DB-5 column (30 mm 0.25 mm 0.25 mm) (Cho et al., 2003a; Cho and Yoon, 2008).
3.
Results and discussion
3.1.
Analysis of inactivation kinetics
Fig. 1 shows the decrease in the viability of MS-2 phages (Fig. 1a) and B. subtilis spores (Fig. 1b) versus IT (UV dose: i.e., the average light intensity at 254 nm, I, in mW/cm2, and exposure time, T, in s: Bolton and Linden, 2003) during the single-step disinfection with UV/H2O2. Fig. 2 shows the decrease in viability plotted versus CT (i.e., the product of time-averaged free chlorine concentration, C, and contact time) during free chlorine disinfection. These were performed either as the primary disinfectant in a single-step or as the secondary disinfectant after 1 log inactivation had been achieved by the primary UV or UV/H2O2 disinfection following the kinetics determined in Fig. 1. Note that the secondary disinfection data in Fig. 2 were normalized such that the first data point (i.e., 1 log after primary disinfection) was placed at the origin. Therefore, 1 log inactivation achieved by secondary disinfection with free chlorine would correspond to an overall 2 log inactivation by the sequential process (i.e., 1 log by primary disinfection with UV or UV/H2O2 and an additional 1 log by secondary disinfection by free chlorine). The inactivation curves in Figs. 1 and 2 were characterized by pseudo-first order decrease in viability with respect to IT (i.e., UV dose) or CT, respectively, with the presence of initial lag phase in some of the curves during which little inactivation occurred. The kinetics for UV and UV/H2O2 disinfection were analyzed using the following delayed Chick-Watson model (Rennecker et al., 2000): 8 > > > <
N 0 ¼ exp k IT ITlag N0 > > > :
if IT ITlag ; if IT > ITlag ;
(1)
Fig. 1 e Inactivation kinetics of (a) MS-2 phage and (b) B. subtilis spores during the single-step application of UV/H2O2 (Insets in (a) and (b) show changes in k and ITlag as a function of initial H2O2 concentration, respectively; pH 7, 20 C, [I]0 [ 0.38 mW/cm2).
1066
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 6 3 e1 0 7 0
0
log(N/N0)
-1
-2 Synergistic Inactivation
Synergistic Inactivation
Cl2 only
-3
-4 0.0
UV followed by Cl2
Cl2 only
UV/H2O2 followed by Cl2
UV followed by Cl2
UV/H2O2 followed by Cl2 + t-BuOH
UV/H2O2 followed by Cl2
0.1
a
0.2
0.3
0.4
0
60
120
b
CT (mg-min/L)
180
240
300
360
CT (mg-min/L)
Fig. 2 e Inactivation kinetics of (a) MS-2 phage and (b) B. subtilis spores during the single-step application of free chlorine and sequential application of free chlorine after UV and UV/H2O2 (pH 7, 20 C, UV dose: 42 mJ/cm2, [H2O2]0 [ 0.6 mM, [HOCl]0 [ 0.04e4 mg/L). where N ¼ concentration (pfu/mL or cfu/mL) of viable microorganisms at time t, N0 ¼ initial concentration (pfu/mL or cfu/ mL) of viable microorganisms, I ¼ incident light intensity (mW/cm2), k ¼ inactivation rate constant (cm2/mJ), and ITlag ¼ x-axis intercept of the linear portion of inactivation curve. For free chlorine disinfection, IT, in the above equaRt tions, was replaced by CT ¼ 0 Cdt where C ¼ concentration of free chlorine as Cl2 (mg/L), k in cm2/mJ by k in L/(mg-min), and ITlag by CTlag Correlation coefficients for the linear regressions on all the data in the linear region were relatively high (R2 > 0.97). These kinetic parameters determined from Figs. 1 and 2 are summarized in Tables 1 and 2, respectively.
3.2.
for B. subtilis spores to UV light (Mamane-Gravetz et al., 2005; USEPA, 2006), although slight differences in absolute values of UV dose might have resulted from lot to lot variations in microorganisms and differences in test methods. Control test results suggested that addition of H2O2 up to 2 mM did not result in inactivation of either MS-2 phage or B. subtilis spores when UV was not applied. The kinetics of MS-2 phage and B. subtilis spores inactivation increased as the H2O2 concentration was increased (Fig. 1 and Table 1) under the UV irradiation treatment. For example, the UV dose required to achieve a 3 log inactivation at H2O2 concentration of 0.6 mM was 32 and 21 mJ/cm2 for MS-2 phage and B. subtilis spores, respectively. These values were approximately 43% and 24% of the UV dose required to achieve a 3 log inactivation of MS-2 phage and B. subtilis spores by the UV irradiation treatment only. This suggests that the addition of H2O2 was more effective in enhancing inactivation kinetics for MS-2 phage than B. subtilis spores. It is noteworthy that the pseudo-first order rate constant (k) gradually increased as H2O2 concentration was increased for MS-2 phage (Fig. 1a inset). In contrast, for B. subtilis spores, rate constant negligibly changed but the lag-phase factor (ITlag) gradually decreased as H2O2 concentration was increased (Fig. 1b inset). The kinetics were found to be enhanced mostly by OH produced from the photolysis of H2O2 by UV. When excess t-butanol (30 mM) was added to the reaction mixture
Single-step disinfection: UV or UV/H2O2
When the UV irradiation treatment was applied without H2O2, MS-2 phage and B. subtilis spores were inactivated following pseudo-first order kinetics with rate constants (k) of 0.053 and 0.129 cm2/mJ, respectively. The inactivation kinetics for B. subtilis spores was faster by approximately 2.5 times, but exhibited an initial lag phase with ITlag ¼ 4.7 mJ/cm2. The UV dose required to achieve a 3 log inactivation of MS-2 phage and B. subtilis spores by UV alone was 57 and 28 mJ/cm2, respectively. These results are consistent with earlier findings that the UV dose required to achieve 3 log inactivation was 49 mJ/cm2 for MS-2 phage and 24.5 mJ/cm2 for B. subtilis spores, corresponding to approximately 50% higher sensitivity
Table 1 e Lag-phase factor and inactivation rate constant during single-step application of UV/H2O2 (obtained from fitting data in Fig. 1). [H2O2]0 (mM) [t-butanol]0 (mM) MS-2 B. subtilis spores
a
ITlag kb ITlaga kb
a Lag phase: mJ/cm2. b Inactivation rate constant: cm2/mJ.
0
0.05
0.10
0.20
0.25
0.35
0.60
0.60
0
0
0
0
0
0
0
30
0.22 0.053 4.7 0.129
0.54 0.056 e e
0.01 0.060 3.98 0.141
0.82 0.069 e e
e e 2.30 0.146
0.68 0.080 e e
1.46 0.089 0.99 0.155
0.63 0.054 5.34 0.137
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 6 3 e1 0 7 0
Table 2 e Lag-phase factor and inactivation rate constant during the sequential application of free chlorine after UV or UV/H2O2 (obtained from fitting data in Fig. 2). Experimental conditions
Kinetics
Primary Secondary t-BuOH CTlaga disinfection disinfection (mM) MS-2 phage
B. subtilis spores
e UV UV/H2O2 UV/H2O2 e UV UV/H2O2 UV/H2O2
Cl2 Cl2 Cl2 Cl2 Cl2 Cl2 Cl2 Cl2
0 0 0 30 0 0 0 30
0.03 0.03 0.02 0.05 61 45 30 e
kb 8.986 9.276 13.002 10.213 0.011 0.011 0.013 e
a Lag phase: mg-min/L. b Inactivation rate constant: L/mg-min.
containing 0.6 mM H2O2 (i.e., the greatest amount of H2O2 examined), the kinetics of inactivation for both MS-2 phage and B. subtilis spores were significantly reduced and became the same as those obtained with the UV irradiation treatment alone. It is noteworthy that the kinetics was not slower than those obtained with UV alone, since the attenuation of the UV radiation by H2O2 was negligible (UV transmittance: near 97% at the highest H2O2 concentration of 0.6 mM). If UV absorption by H2O2 were significant, the inactivation by UV in UV/H2O2 system could have been inhibited to some degree. The role of OH on MS-2 phage inactivation was quantified separately from that of the UV irradiation treatment. The OH CTwas determined using pCBA as a surrogate using the method described by Elovitz and von Gunten (1999). Fig. 3 shows the level of MS-2 phage inactivation plotted versus CT of OH, which was determined by measuring the steady-state OH concentration using pCBA in the same experimental conditions of Fig. 1. Note that the first data point in the curve is located at 2 logs which represents the inactivation level achieved by the UV irradiation treatment only. The result suggests that the additional inactivation achieved with
Fig. 3 e Level of MS-2 phage inactivation versus H2O2 concentration during single-step UV/H2O2 disinfection (UV dose: 42 mJ/cm2).
1067
H2O2 addition was linearly correlated with the level of OH exposure (CT). For example, increasing the H2O2 concentration from 0.10 mM to 0.60 mM increases the OH CT by a factor of six (0.5 108 to 3.0 108 mg-min/L as OH) and inactivation by OH by a factor of four (from an additional 0.4 log to 1.6 log inactivation). This analysis confirms that OH plays a major role in the enhanced microbial inactivation in the UV/H2O2 system. Enhanced MS-2 phage inactivation might be related to the oxidation of the outer protein coat by OH (Dean et al., 1997; Fiers et al., 1976; Mamane et al., 2007). For B. subtilis spores, oxidation of the cell membrane or cell wall components by OH resulted in the disintegration of the cell and enhanced UV light penetration (Maness et al., 1999; Sunada et al., 2003). The OH CT determined in this study was different from that reported by Mamane et al. (2007) for MS-2 phage (e.g., for 1 log inactivation, OH CT of 0.34 108 mgmin/L was reported by Mamane et al. (2007), while 1.5 108 mg-min/L was measured in this study (Fig. 3), although reasons for such a difference are unclear.
3.3. Sequential disinfection: UV or UV/H2O2 followed by free chlorine Fig. 2 shows the inactivation kinetics of MS-2 phage (Fig. 2a) and B. subtilis spores (Fig. 2b) by the sequential application of UV with and without 0.6 mM H2O2 to achieve 1 log inactivation followed by Cl2. Although chlorine concentration was varied between 0.1 and 3.0 mg/L as Cl2 for each case, all the data points merged into a single inactivation curve when plotted versus CT. When UV alone was applied as the primary disinfectant and chlorine was subsequently applied (i.e., the kinetics were the same with and without preceding UV treatment), no synergistic effect was observed for both MS-2 phage (Shang et al., 2007) and B. subtilis spores (Cho et al., 2006). In contrast, significant synergistic effects were observed when free chlorine was applied after UV/H2O2. For example, the CT required to achieve 2 log inactivation by free chlorine after UV/H2O2 pretreatment was reduced by 32% for MS-2 phage and 18% for B. subtilis spores, when compared to the CT required by single-step inactivation by free chlorine. The observed synergism for MS-2 phage consisted of a decrease in the lag-phase factor (from 0.03 to 0.02 mg-min/L) as well as an increase in the inactivation rate constant (from 8.986 to 13.002 L/mg-min from a linear portion of the curve). For B. subtilis, post-shoulder rate constant did not change, but lag-phase factor decreased from 61 to 30 mg/L-min (Table 2). The synergism observed in the sequential disinfection process with UV/H2O2 followed by free chlorine might be related to the disruption of cell membrane and/or cell wall components by OH during the primary disinfection which facilitates the reactive diffusion of free chlorine during the secondary disinfection step (Arana et al., 1999; Cho et al., 2006). Similar synergistic effects have been previously reported when chemical disinfectants are subsequently applied (Cho et al., 2006). Table 3 summarizes synergistic effects quantified using Percent Synergistic Effect previously defined as “additional log inactivation achieved via sequential disinfectant application compared to individual application” (Cho et al., 2006). Percent synergistic effects ranged from 40 to 250% depending on the microorganisms (B. subtilis spores
1068
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 6 3 e1 0 7 0
Table 3 e Comparison of Percent Synergistic Effect in sequential disinfection with previous studies. Sequential disinfection Percent Synergistic Effect (%)a Primary Secondary Bacillus subtilis spores
O3 ClO2 UV UV/H2O2
HOCl HOCl HOCl HOCl
75%b,c 145%c 0c 65% (this study)
MS-2 phage
UV/H2O2
HOCl
75% (this study)
Cryptosporidium parvum oocyst
O3 O3 ClO2 ClO2
HOCl Chloramine HOCl Chloramine
100%d,e,f, 250%g 100%h, 250%d 100%i 40%i
a Additional log inactivation obtained via sequential disinfectant application (compared to 1 log inactivation by primary disinfectant and 1 log inactivation by secondary disinfectant when each was applied independently) (Cho et al., 2006). b (Cho et al., 2003b). c (Cho et al., 2006). d (Rennecker et al., 2000). e (Driedger et al., 2000). f (Corona-Vasquez et al., 2002). g (Li et al., 2001). h (Biswas et al., 2005). i (Corona-Vasquez et al., 2002).
and C. parvum oocyst in this survey, no data available for MS2 phage during chemical sequential disinfection) and the sequence of disinfectant application. Percent synergistic effects for UV/H2O2-followed-by-HOCl process for MS-2 phage and B. subtilis spores were 75% and 65%, respectively. Also evident in Table 3 is the absence of synergism when the UV irradiation treatment was followed by chemical disinfection. Inactivation by UV has been primarily linked to damages in DNA and RNA without damage to cell wall/ membrane components (Shin et al., 2001; USEPA, 2006). Therefore, synergism is not expected with subsequent application of free chlorine; the inactivation mechanism involving reactive diffusion across the cell wall/membrane (Young and Setlow, 2003).
Effect of the OH on synergism was further quantitatively analyzed in Fig. 4. Sequential disinfection was first performed to achieve 1 log inactivation by primary disinfection with UV and additional 1 log inactivation by secondary application of free chlorine, i.e., overall 2 log inactivation for both microorganisms (i.e., the first bar in Fig. 4 (a) and (b)). Addition of 0.6 mM of H2O2 during the primary UV disinfection step, with other conditions fixed, achieved overall inactivation of 3.5 log for MS-2 phage and 3.3 log for B. subtilis spores. Approximately 0.9 log additional inactivation for MS-2 phage and 0.8 log for B. subtilis spores were achieved during the primary disinfection step due to the additional contribution of OH as discussed above. Furthermore, approximately 0.6 log inactivation for MS-2 phage and 0.5 log for B. subtilis spores were additionally achieved during the secondary chlorine disinfection step. Collectively, the synergism achieved by adding H2O2 occurred in both disinfection steps and summed up to 1.5 log (96.8%) and 1.3 log (95.0%) inactivations that were additionally achieved for MS-2 phage and B. subtilis spores, respectively.
3.4.
Degradation of selected organic contaminants
Addition of H2O2 in the UV disinfection process, whether followed by secondary free chlorination or not, could result in additional benefit with respect to destruction of some organic contaminants. Chemicals such as bisphenol-A, geosmin and 2,4-D (each 350 mg/L) were all found to be negligibly degraded by the individual application of 57 mJ/cm2 (0.38 mW/cm2 for 150 s) of UV or 0.6 mM of H2O2. When 0.6 mM H2O2 was added under 0.38 mW/cm2 of UV irradiation, 73%, 65% and 37% of bisphenol-A, geosmin and 2,4-D were degraded, respectively, within 2.5 min (i.e., hence UV dose ¼ 57 mJ/cm2). These resulted from relatively high rate constants between these chemicals and OH (k(OH þ bisphenol-A) ¼ 1010 M1 s1, k (OH þ geosmin) ¼ 8 109 M1 s1 and k(OH þ 2,4D) ¼ 3 109 M1 s1 (Buxton et al., 1988)). Using these rate constants and steady-state OH concentration (i.e., independently measured using pCBA) would predict 75%, 67%, and 34% degradation of bisphenol-A, geosmin, and 2,4-D, respectively, which are consistent with the above observations.
Fig. 4 e Schematic illustration of synergism observed with the sequential application of UV/H2O2 followed by free chlorine (right bar) compared to UV followed by free chlorine (left bar) for inactivation of (a) MS-2 phage and (b) B. subtilis spores (pH 7, 20 C, UV dose: 19 mJ/cm2, [H2O2]0 [ 0.6 mM, [Cl2]0 [ 0.15 mg/L).
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 6 3 e1 0 7 0
Similar findings have been reported for destruction of endocrine disrupting compounds such as bisphenol-A, ethinyl estradiol and estradiol (Rosenfeldt and Linden, 2004) and taste and odor causing compounds such as methylisoborneol (MIB) and geosmin (Rosenfeldt et al., 2005), amongst others.
4.
Conclusion
The results from this study collective suggest that it could be beneficial to add H2O2 in UV disinfection process in particular when free chlorine is subsequently added as the residual disinfectant. Synergistic effects with respect to microorganism inactivation would be two folds. First, enhanced inactivation of MS-2 phage and B. subtilis spores was observed during the primary UV disinfection step due to the additional inactivation achieved by OH that is produced by H2O2 photolysis. Second, additional level of inactivation was achieved during the secondary disinfection with chlorine. Alternatively, secondary disinfection could benefit from reduced chlorine dosage and accompanying reduction in disinfection by-product formation, while a care must be taken not to induce chlorine decay due to residual H2O2. Overall, the synergism was significant, for example, as much as 1.5 log and 1.3 log inactivation, in addition to the 2 logs expected without synergism, for MS-2 phage and B. subtilis spores for the case discussed above. Finally, the addition of H2O2 in UV process could result in organic contaminant degradation, which otherwise would not be achieved by UV nor free chlorine. These synergistic effects and contaminant degradations resulted from advanced oxidation by OH. It should be noted that all the experiments were performed in organic-free water (except when model contaminants were added) in this study and therefore further studies are required to accurately assess and quantify the synergistic effects in natural waters when UV/H2O2 process is applied. In natural waters, it is expected that more OH (hence more UV irradiation and H2O2) would be required to bring about the similar level of synergistic effects due to UV light absorption and OH scavenging by organic matter and carbonate species.
Acknowledgements The study was supported by the Eco-Technopia 21 project from the Ministry of Environment in Korea and the Korea Research Foundation Grant funded by the Korean Government (KRF-2008-357-D00142).
references
American Public Health Association(APHA), American Water Works Association (AWWA), Water Environmental Federation (WEF), 1999. Standard Methods for the Examination of Water and Wastewater, twentieth ed. American Public Health Association, Washington, D.C. Arana, I., Santorum, P., Muela, A., Barcina, I., 1999. Chlorination and ozonation of waste-water: comparative analysis of
1069
efficacy through the effect on Escherichia coli membranes. Journal of Applied Microbiology 86 (5), 883e888. Biswas, K., Craik, S., Smith, D.W., Belosevic, M., 2005. Synergistic inactivation of Cryptosporidium parvum using ozone followed by monochloramine in two natural waters. Water Research 39 (14), 3167e3176. Bolton, J.R., Linden, K.G., 2001. Determination of Fluence (UV Dose) in a Bench-scale Collimated Beam Apparatus for Monochromatic and Broadband UV Lamps. Proceedings of the American Water Works Association, Water Quality Technology Conference. American Water Works Association, Denver, Colo. Bolton, J.R., Linden, K.G., 2003. Standardization of methods for fluence (UV dose) determination in bench-scale UV experiments. Journal of Environmental Engineering 129 (3), 209e216. Bolton, J.R., Dussert, Z., Bukhari, Z., Hargy, T., and Clancy, J.L. (1998) Inactivation of Cryptosporidium parvum by mediumpressure ultraviolet light in finished drinking water. Proceedings of the American Water Works Association. Water Quality Technology Conference. Annual Conference, Dallas, TX. Bukhari, Z., Hargy, T.M., Bolton, J.R., Dussert, B., Clancy, J.L., 1999. Medium-pressure UV for oocyst inactivation. Journal American Water Works Association 91 (3), 86e94. Buxton, G.V., Greenstock, C.L., Helman, W.P., Ross, A.B., 1988. Critical-review of rate constants for reactions of hydrated electrons, hydrogen-atoms and hydroxyl radicals ($OH/$O) in aqueous solution. Journal of Physical and Chemical Reference Data 17 (2), 513e886. Cho, M., Yoon, J., 2008. Measurement of OH radical CT for inactivating Cryptosporidium parvum using photo/ferrioxalate and photo/TiO2 systems. Journal of Applied Microbiology 104 (3), 759e766. Cho, M., Chung, H.M., Yoon, J., 2003a. Disinfection of water containing natural organic matter by using ozone initiated radical reactions. Applied and Environmental Microbiology 69 (4), 2284e2291. Cho, M., Chung, H.M., Yoon, J., 2003b. Quantitative evaluation of the synergistic sequential inactivation of Bacillus subtilis spores with ozone followed by chlorine. Environmental Science & Technology 37 (10), 2134e2138. Cho, M., Chung, H.M., Choi, W.Y., Yoon, J.Y., 2005. Different inactivation behaviors of MS-2 phage and Escherichia coli in TiO2 photocatalytic disinfection. Applied and Environmental Microbiology 71 (1), 270e275. Cho, M., Kim, J.H., Yoon, J., 2006. Investigating synergism during sequential inactivation of Bacillus subtilis spores with several disinfectants. Water Research 40 (15), 2911e2920. Clancy, J.L., Hargy, T.M., Marshall, M.M., Dyksen, J.E., 1998. UV light inactivation of Cryptosporidium oocysts. Journal American Water Works Association 90 (9), 92e102. Corona-Vasquez, B., Rennecker, J.L., Driedger, A.M., Marin˜as, B.J., 2002. Sequential inactivation of Cryptosporidium parvum oocysts with chlorine dioxide followed by free chlorine or monochloramine. Water Research 36, 178e188. Craik, S.A., Finch, G.R., Bolton, J.R., Belosevic, M., 2000. Inactivation of Giardia muris cysts using medium-pressure ultraviolet radiation in filtered drinking water. Water Research 34 (18), 4325e4332. Dawson, D.J., Paish, A., Staffell, L.M., Seymour, I.J., Appleton, H., 2005. Survival of viruses on fresh produce, using MS2 as a surrogate for norovirus. Journal of Applied Microbiology 98 (1), 203e209. Dean, R.T., Fu, S.L., Stocker, R., Davies, M.J., 1997. Biochemistry and pathology of radical mediated protein oxidation. Biochemical Journal 324, 1e18. Driedger, A.M., Rennecker, J.L., Marin˜as, B.J., 2000. Sequential inactivation of Cryptosporidium parvum oocysts with ozone and
1070
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 6 3 e1 0 7 0
free chlorine. Water Research 34 (14), 3591e3597. Elovitz, M.S., von Gunten, U., 1999. Hydroxyl radical/ozone ratios during ozonation processes. I. The Rct concepts. Ozone: Science & Engineering 21 (3), 239e260. Fiers, W., Contreras, R., Duerinck, F., Haegeman, G., Iserentant, D., Merregaert, J., Minjou, W., Molemans, F., Raeymaekers, A., Vandenberghe, A., Volckaert, G., Ysebaert, M., 1976. Complete nucleotide sequence of bacteriophage MS-RNA - primary and secondary structure of replicase gene. Nature 260 (5551), 500e507. Grabow, W.O.K., Gaussmuller, V., Prozesky, O.W., Deinhardt, F., 1983. Inactivation of Hepatitis-A virus and indicator organisms in water by free chlorine residuals. Applied and Environmental Microbiology 46 (3), 619e624. Keswick, B.H., Satterwhite, T.K., Johnson, P.C., Dupont, H.L., Secor, S.L., Bitsura, J.A., Gary, G.W., Hoff, J.C., 1985. Inactivation of Norwalk virus in drinking-water by chlorine. Applied and Environmental Microbiology 50 (2), 261e264. Larson, M.A., Marin˜as, B.J., 2003. Inactivation of Bacillus subtilis spores with ozone and monochloramine. Water Research 37 (4), 833e844. Li, H.B., Finch, G.R., Smith, D.W., Belosevic, M., 2001. Sequential inactivation of Cryptosporidium partum using ozone and chlorine. Water Research 35 (18), 4339e4348. Linden, K.G., Shin, G.A., Faubert, G., Cairns, W., Sobsey, M.D., 2002. UV disinfection of Giardia lamblia cysts in water. Environmental Science & Technology 36 (11), 2519e2522. Mamane-Gravetz, H., Linden, K.G., Cabaj, A., Sommer, R., 2005. Spectral sensitivity of Bacillus subtilis spores and MS2 coliphage for validation testing of ultraviolet reactors for water disinfection. Environmental Science & Technology 39 (20), 7845e7852. Mamane, H., Shemer, H., Linden, K.G., 2007. Inactivation of E. coli, B. subtilis spores, and MS2, T4, and T7 phage using UV/H2O2 advanced oxidation. Journal of Hazardous Materials 146 (3), 479e486. Maness, P.C., Smolinski, S., Blake, D.M., Huang, Z., Wolfrum, E.J. , Jacoby, W.A., 1999. Bactericidal activity of photocatalytic TiO2 reaction: toward an understanding of its killing mechanism. Applied and Environmental Microbiology 65 (9), 4094e4098. Nakayama, A., Yano, Y., Kobayashi, S., Ishikawa, M., Sakai, K., 1996. Comparison of pressure resistances of spores of six
Bacillus strains with their heat resistances. Applied and Environmental Microbiology 62 (10), 3897e3900. Rennecker, J.L., Driedger, A.M., Rubin, S.A., Marin˜as, B.J., 2000. Synergy in sequential inactivation of Cryptosporidium parvum with ozone/free chlorine and ozone/monochloramine. Water Research 34 (17), 4121e4130. Rosenfeldt, E.J., Linden, K.G., 2004. Degradation of endocrine disrupting chemicals bisphenol A, ethinyl estradiol, and estradiol during UV photolysis and advanced oxidation processes. Environmental Science & Technology 38 (20), 5476e5483. Rosenfeldt, E.J., Melcher, B., Linden, K.G., 2005. UV and UV/H2O2 treatment of methylisoborneol (MIB) and geosmin in water. Journal of Water Supply Research and Technology-Aqua 54 (7), 423e434. Shang, C., Cheung, L.M., Liu, W., 2007. MS2 coliphage inactivation with UV irradiation and free chlorine/monochloramine. Environmental Engineering Science 24 (9), 1321e1332. Shin, G.A., Linden, K.G., Arrowood, M.J., Sobsey, M.D., 2001. Lowpressure UV inactivation and DNA repair potential of Cryptosporidium parvum oocysts. Applied and Environmental Microbiology 67 (7), 3029e3032. Shin, G.A., Sobsey, M.D., 2008. Inactivation of norovirus by chlorine disinfection of water. Water Research 42 (17), 4562e4568. Sjogren, J.C., Sierka, R.A., 1994. Inactivation of phage Ms2 by ironaided titanium-dioxide photocatalysis. Applied and Environmental Microbiology 60 (1), 344e347. Stefan, M.I., Bolton, J.R., 1998. Mechanism of the degradation of 1,4-dioxane in dilute aqueous solution using the UV hydrogen peroxide process. Environmental Science & Technology 32 (11), 1588e1595. Sunada, K., Watanabe, T., Hashimoto, K., 2003. Studies on photokilling of bacteria on TiO2 thin film. Journal of Photochemistry and Photobiology A: Chemistry 156 (1e3), 227e233. USEPA (2006) Ultraviolet Disinfection Guidance Manual for the Final Long Term 2 Enhanced Surface Water Treatment Rule. United States Environmental Protection Agency EPA 815-R-06-007. Young, S.B., Setlow, P., 2003. Mechanisms of killing of Bacillus subtilis spores by hypochlorite and chlorine dioxide. Journal of Applied Microbiology 95 (1), 54e67.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 7 1 e1 0 7 8
Available at www.sciencedirect.com
journal homepage: www.elsevier.com/locate/watres
Synthetic musk emissions from wastewater aeration basins Nabin Upadhyay a, Qinyue Sun b, Jonathan O. Allen c, Paul Westerhoff d, Pierre Herckes a,* a
Department of Chemistry and Biochemistry, Arizona State University, PO Box 871604, Tempe, AZ 85287-1604, USA School of Mechanical, Aerospace, Chemical and Materials Engineering, Arizona State University, PO Box 871604, Tempe, AZ 85287-1604, USA c Allen Analytics LLC, 3444 N. Country Club Rd., Suite 100, Tucson AZ 85716-1200, USA d School of Sustainable Engineering and The Built Environment, Arizona State University, PO Box 5306, Tempe, AZ 85287- 5306, USA b
article info
abstract
Article history:
Wastewater aeration basins at publicly owned treatment works (POTWs) can be emission
Received 12 May 2010
sources for gaseous or aerosolized sewage material. In the present study, particle and gas
Received in revised form
phase emissions of synthetic musks from covered and uncovered aeration basins were
22 September 2010
measured. Galaxolide (HHCB), tonalide (AHTN), and celestolide (ADBI) were the most
Accepted 18 October 2010
abundant, ranging from 6704 to 344,306 ng m3, 45e3816 ng m3, and 2e148 ng m3 in the
Available online 26 October 2010
gas phase with particle phase concentrations 3 orders of magnitude lower. The musk species were not significantly removed from the exhaust air by an odor control system,
Keywords:
yielding substantial daily emission fluxes (~200 g d1 for HHCB) into the atmosphere.
Synthetic musks
However, simple dispersion modeling showed that the treatment plants are unlikely to be
Wastewater
a major contributor to ambient air concentrations of these species. Emission of synthetic
Publicly owned treatment works
musk species during wastewater treatment is a substantial fate process; more than 14% of
Aeration basin
the influent HHCB is emitted to the atmosphere in a POTW as opposed to the <1% predicted
Odor control
by an octanolewater partition coefficient and fugacity-based US EPA fate model. The
Atmospheric emissions
substantial atmospheric emission of these compounds is most likely due to active stripping that occurs in the aeration basins by bubbling air through the sludge. ª 2010 Elsevier Ltd. All rights reserved.
1.
Introduction
Synthetic musksdsubstitutes for natural musk fragrancesdare a class of compounds widely used in personal care products (PCPs) (Rimkus, 1999; Roosens et al., 2007). Due to their toxicity to microorganisms and their bioaccumulation potential, worldwide production of synthetic nitro-musks, including musk xylene (MX) and musk ketone (MK), is decreasing, while the production of polycyclic musks, including galaxolide (HHCB) and tonalide (AHTN) is still prevalent. HHCB and AHTN alone comprise 90e95% of the total market volume of musk species (HERA, 2004; Reiner et al., 2007; Rimkus, 1999). An estimated 6000 metric tons of
polycyclic and nitro musk compounds were produced globally in 1999 (Salvito, 2006). There is increasing concern in the scientific community about the possible toxicity of polycyclic musks to terrestrial life, including humans, which has prompted more research on this group of emerging contaminants. Limited studies exist on the exposureeresponse relationships of synthetic musks; however, some findings have indicated their accumulation in aquatic biota, including fish and mussels, and in human breast milk, as well as their endocrine disruption potential (Bitsch et al., 2002; Luckenbach and Epel, 2005; Schreurs et al., 2004). HHCB, AHTN, and ADBI (celestolide) have been detected on the order of a few ng m3 down to pg m3 levels even in
* Corresponding author. Tel.: þ1 480 965 4497; fax: þ1 480 965 2747. E-mail address:
[email protected] (P. Herckes). 0043-1354/$ e see front matter ª 2010 Elsevier Ltd. All rights reserved. doi:10.1016/j.watres.2010.10.024
1072
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 7 1 e1 0 7 8
remote and pristine environments, namely in the ambient air in the Great Lakes area (Peck and Hornbuckle, 2004), over the North Sea, and in the arctic (Xie et al., 2007). The major pathway of PCPs into the environment is through their use and consequently through wastewater as they wash off the skin as well as release from soaps, detergents, and other consumer products (Kolpin et al., 2002; Ternes, 1998). Numerous studies have reported HHCB and AHTN in wastewater (liquid and sludge phases). Publicly owned treatment works (POTWs) collect and treat sewage from residential, commercial and industrial sources (Buerge et al., 2003; Horii et al., 2007; Reiner et al., 2007). Discharge of treated wastewater is responsible for musk compounds in surface waters and oceans (Buerge et al., 2003; Rimkus, 1999; Xie et al., 2007). The concentrations of polycyclic musks in wastewaters are on the order of hundreds to thousands of ng L1 (Rimkus, 1999; Simonich et al., 2002). Since these compounds are semivolatile and hydrophobic in nature, they partition into the gas phase or biosolids. Given the high concentrations of HHCB and AHTN in aeration basins, where air is bubbled through the wastewater, a significant potential exists for their volatilization and aerosolization. Most research on PCP fate and transport through POTWs focuses on the liquid phase, namely biosorption or biodegradation, whereas there is little information on atmospheric emissions of artificial musk species from POTWs. The objectives of this study are (i) to determine the concentrations of synthetic musk compounds in the ambient air and wastewater samples at covered and uncovered POTWs; (ii) to assess the contribution of POTWs to environmental musk concentrations, especially in the gas phase; and (iii) to evaluate the effectiveness of an odor control system at a POTW intended to remove musk compounds in the exhaust air. Samples collected at two POTWs and at a suburban site in the Phoenix (AZ) metropolitan area were analyzed by gas chromatography/mass spectrometry (GC/MS). The findings of this study provide new insights into the volatilization of musk species in sewage treatment and the role of POTWs as atmospheric emission sources for these species.
2.
Experimental work
2.1.
Reagents
The dichloromethane (DCM) used as solvent was Fisher Optima Grade (Fair Lawn, NJ). HHCB (522 mg mL1 solution in diethyl phthalate) and MX and MK (100 mg mL1 solutions in methanol) were purchased from Sigma Aldrich (St. Louis, MO). AHTN and ADBI were purchased in the powder form from Toronto Research Chemicals Inc. (ON, Canada); deuterated polycyclic aromatic hydrocarbons (d10-acenaphthene, d10phenanthrene and d10-fluoranthene), used as internal standards, were purchased from SigmaeAldrich (St Louis, MO). d10-acenaphthene and d10-phenanthrene (each 2000 mg mL1 in methanol) were used as purchased while the powder of d10fluoranthene was dissolved in DCM (4570 mg mL1 in DCM). Other reagents included NaCl (>99%) from Fisher Scientific (Fairlawn, NJ), ACS Reagent Grade Na2SO4 (>99%) from SigmaeAldrich (St. Louis, MO), and Pesticide Grade Glass Wool from Supelco (Bellefonte, PA).
2.2.
Sample collection
Particle and gas phase samples were collected at two POTWs in the Phoenix (AZ) metropolitan area using a commercial semivolatile polyurethane foam (PUF) sampler (TE-1000 PUF, Tisch Environmental Inc., Cleves, OH). Plant A has a design treatment capacity of 68 million liters per day (MLD) of wastewater and includes the following covered processes: headworks, primary sedimentation, aerated activated sludge treatment, secondary sedimentation, tertiary filtration, and disinfection. However, these processes are not closed to air inflow from outside. All of these processes are equipped with ventilation systems to collect and treat off-gases from the facility. Off-gas is passed through an odor control unit (OCU) that consists of packed beds of activated carbon. Air samples at Plant A were collected via an aluminum inlet pipe (4-inch diameter) with one end inserted through a hole in the exhaust side wall of the aeration basin and the other end connected to the inlet of the PUF sampler. Similarly, one end of the aluminum duct faced downward at the OCU vent while the other end was secured to the inlet of the sampler. Plant B has a design capacity of 680 MLD of wastewater, is an uncovered facility (i.e., no odor control), and employs primary sedimentation, aerated activated sludge treatment, secondary treatment, and disinfection. Ambient samples from Plant B were collected at the aeration basin as well as at a perimeter site 200 m away from the aeration basin. Additional urban ambient samples were collected from the rooftop of the School of Life Sciences at the Tempe campus of Arizona State University (ASU). Sampling was conducted during December 2008eFebruary 2009 at Plant A, May 2009 at Plant B, and April 2009 at ASU. The sampled air volume ranged from 133 to 387 m3. Meteorological data, which included speed and direction of wind, were obtained from the meteorological station at Sky Harbor International Airport (http://www. wunderground.com/US/AZ/Phoenix.html). Prevalent wind directions during sampling were ESE, SE, ENE at Plant A; SE, W, SW at Plant B; and SE, ENE, WSW at ASU with a daily average wind speed of 1.3e3.1 m s1. During each sampling, the PUF sampler was operated at a flow rate of 24 L min1 for 9e24 h. Total suspended particulate matter (TSP) was collected on a 4-inch diameter quartz fiber filter (QFF) that was followed by a polyurethane foam plug (PUFP, 3-inch diameter 4-inch height) to trap gas phase species. QFFs were wrapped in aluminum foil and fired at 550 C overnight before use. PUFPs were cleaned prior to use with Alconox and Milli-Q water three times and air-dried under a hood before sonication (20 min) in DCM three times and air-drying. The cleaned PUFPs were stored in amber glass bottles until sampling and extraction. Representative grab samples were collected from the aeration basins close to the sampling inlets during air sampling. Samples were collected in polypropylene bottles cleaned with deionized water (>18 MU-cm) and were stored in the dark at 4 C prior to analysis.
2.3.
Sample preparation
An overview of sample preparation for musk analysis is shown in supporting information (SI Fig. S1). For the particle phase
1073
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 7 1 e1 0 7 8
musk compounds, one-half of a QFF was spiked with the set of internal standards (10 mL each) and extracted 3 times in 25 mL of DCM under sonication. For the gas phase musk samples, the PUFPs were spiked with the internal standards (10 mL each) and extracted 3 times in 50 mL of DCM using compressionerelease cycles. The combined extracts for each phase were filtered through a 0.7 mm pore size Whatman glass fiber filter (GFF), dried under nitrogen, and concentrated to 250 mL separately. Filter blanks for PUFF and PUFP were subject to same extraction and analytical procedures as the samples. Wastewater samples (two from each plant) were first filtered through GFFs. A 250 mL filtrate aliquot was spiked with the internal standards and the salinity increased with 10 g of NaCl. The aqueous phase was then extracted 3 times in 50 mL of DCM. The combined DCM extracts were dried over anhydrous Na2SO4 and concentrated to 250 mL prior to analysis by GC/MS.
2.4.
GC/MS analysis
An Agilent 6890 gas chromatograph coupled to an Agilent 5973 inert mass selective detector with electron impact ionization was used to determine the musk species. Separation was accomplished using an HP 5MS capillary column (30 m
250 mm 0.25 mm, 5% phenyl-methyl-siloxane film). Injections of 1 mL aliquots were performed in splitless mode, and helium (ultra-high purity) was used as a carrier gas. The GC temperature profile consisted of an initial hold time of 10 min at 65 C followed by a temperature gradient of 10 C min1 to a final temperature of 300 C, which was held constant for 20 min. Authentic standards were used for identification and quantification of the target species.
3.
Results and discussion
The synthetic musk compounds under investigation as well as their physicochemical properties are shown in Table 1. Watereoctanol partition coefficients (KOW), water solubility (SW), and Henry’s constants (HC) for these compounds are similar to those for hydrophobic semivolatile organic compounds (Balk and Ford, 1999; Paasivirta et al., 2002; Tas et al., 1997). The observed bioconcentration factors of MK and MX correlate well with their KOW values, whereas those for HHCB and AHTN are lower than predicted from KOW (Rimkus, 1999; Rimkus et al., 1997).
Table 1 e Synthetic musks and their properties. CAS No.
MW
Ions quantified
Retention time (min)
Log KOW
SW, (mg L1)
HC, (Pa m3 mol1)
Galaxolide, HHCB
1222-05-5
258.4
243, 213
25.03
5.9a
1.75
11.3a
Tonalide, AHTN
1506-02-1
258.4
243, 258
25.15
5.7a
1.25
12.5a
Celestolide, ADBI
13171-00-1
244.3
229, 244
23.55
6.6b
0.015
Musk xylene, MX
81-15-2
297.2
282, 229
25.12
4.9c
0.49
0.018c
Musk ketone, MK
81-14-1
294.3
279, 294
26.33
4.3c
1.9
0.0061c
Compound
a Balk and Ford, 1999. b Paasivirta et al., 2002. c Tas et al., 1997.
1801b
Structure
1074
3.1.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 7 1 e1 0 7 8
Occurrence of musk species
Table 2 presents the observed concentrations of the target musk species. In the present study, MX and MK were not detected in any samples, so they are not included in any tables or figures. Considering the sampling times and analytical protocols used, atmospheric (gas and particle phases) concentrations of these species would be substantially below 1 ng m3. HHCB, AHTN, and ADBI were detected in atmospheric samples. Trace amounts of HHCB were detected in field blanks; however, the equivalent air concentrations (0.12 ng m3 in gas and 3.2 ng m3 in particle phase) were orders of magnitude lower than the typical sample concentrations. Detection limits (DLs) for the present work were defined as the smallest signal of the analyte that can be distinguished from background noise by the GC/MS. DLs for HHCB, AHTN, and ADBI were 0.6, 0.03, and 0.03 ng m3 (air volume ¼ 350 m3), respectively. Gas-phase HHCB and AHTN ranged from 74,585 to 344,306 ng m3 and 374 to 3816 ng m3 at Plant A and 6704 to 17223 ng m3 and 45 to 192 ng m3 at Plant B, respectively. Gasphase ADBI in our POTW samples ranged from 2 to 148 ng m3, which are several orders of magnitude higher than reported in urban or background samples in the published literature (Peck and Hornbuckle, 2004; Xie et al., 2007). Particle phase concentrations were much lower, with HHCB and AHTN ranging from 11 to 146 ng m3 and 2 to 26 ng m3 at Plant A and 73 to 110 ng m3 and 15 to 23 ng m3 at Plant B, respectively. It is noteworthy that the gas and particle phase HHCB and AHTN showed a steep decline, e.g., at Plant B, by 1e2 orders of magnitude between the over-the-aeration basin and the off-site location (Table 2). Short atmospheric lifetime on the order of 5.3 h (for HHCB) (Aschmann et al., 2001), quick diffusion, and sampling on different days at the aeration basin and off-site
location might have caused these large discrepancies in concentrations between the emission source and off-site location. However, high concentrations of gas phase HHCB and AHTN close to the plant (Plant B) and background ASU (Table 2) could not be explained. Atmospheric concentrations of musk species during our study were highly variable with one sample (5-Nov-08, Plant A) having exceptionally high concentrations of musk compounds. This is likely reflective of changes in wastewater contents. In the present study, daily liquid samples were not collected. However, Reiner and coworkers (Reiner et al., 2007) report HHCB and AHTN in POTWs vary by a factor of 6 in wastewater samples collected within 5 consecutive days. In all cases, the musk species were partitioned nearly exclusively into the gas phase. The percentage concentrations of gas-phase HHCB and AHTN (cg/(cgþcp) 100%, where cp and cg are the particle and gas phase concentrations, respectively) at both plants and off-site at Plant B were >99% and 95.5%, respectively. Urban background gas-phase concentrations of HHCB and AHTN ranged from 213 to 238 ng m3 and 1 to 2 ng m3, respectively, while particle-phase concentrations of HHCB and AHTN were both <0.06 ng m3. The reported concentrations of airborne (gas þ particle) HHCB and AHTN in the literature are on the order of 1e5 ng m3 in urban areas and an order of magnitude lower at pristine background sites (Peck and Hornbuckle, 2004, 2006). Compared to the concentrations in urban air in Milwaukee, WI (Peck and Hornbuckle, 2004), HHCB at the urban (ASU) site in this study is 1e2 orders of magnitude higher whereas AHTN has similar concentrations (Fig. 1). Airborne HHCB and AHTN at the aeration basins are, respectively, 2e3 and 1e2 orders of magnitude higher than those in a cosmetic plant environment (Chen et al., 2007)dthe only study that has investigated these species at a site labeled as major musk emission source. The cited studies have reported MX and MK on the order of tens of
Table 2 e TSP and airborne concentrations of the musks in the POTWs and at a background site.a Site
Date
TSP (mg m3)
Gas phase 3
Particle phase
HHCB (ng m ) AHTN (ng m ) ADBI (ng m ) HHCB (ng m3) AHTN (ng m3) Plant A Aeration chamber
Odor control unit
Plant B Aeration chamber
Off-site
ASU
3
3
29-Oct-08 1-Nov-08 5-Nov-08 15-Jan-09 16-Jan-09 18-Jan-09
71.0 53.0 32.9 NA 8.06 5.86
74585 112455 344306 79047 95656 91044
1025 1395 3816 496 638 374
17 31 148 17 27 14
11 13 146 110 99 73
2 3 26 23 18 15
21-May-09 23-May-09 25-May-09 29-May-09 30-May-09 31-May-09
23.0 29.0 20.3 17.4 18.2 45.4
14610 17223 6704 282 429 674
80 192 45 2 3 5
3 2 2 ND ND ND
3.14 1.72 3.90 0.20 0.19 0.12
0.7 0.5 0.9 0.063 0.090 0.06
28-Apr-09 29-Apr-09 30-Apr-09
NA NA NA
236 213 238
2 2 1
ND ND ND
0.05
0.02 ND ND
a Equivalent field blank concentrations of HHCB in gas phase ¼ 0.12 ng m3 and in particle phase ¼ 3.2 ng m3 (air volume ¼ 350 m3); NA, not available; ND, not detected; FB, field blank.
1075
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 7 1 e1 0 7 8
pg m3 in the ambient air, consistent with the non-detection in our study.
Sewage concentrations compared to other studies
a
1000000 100000 10000 1000 100 10 1 0.1 0.01
In aeration basins, air is bubbled through wastewater using submerged diffusers to deliver oxygen to aerobic bacteria that
Se a th
N or
R
ur a
lG
er m
an y
SA ,U
(d )
(d )
(c
)
(c ) SA
ke
U
rb
La
an
ga n
M ic hi
au ke e,
fa
an ce gr fra
gr O
ut s
id e
fra
U
ct o
ry ct o fa e
an c
U AS In si de
ry
(b )
) a
(a ri z on
B
,A
la nt at P
si te ffO
b
(a
)
(a ) B an t
A Pl
an t
1000
(b )
HHCB AHTN ADBI
Pl
Concentration (ng m )
-3
3.3. Emission fluxes from wastewater treatment operations
Gas phase
(a )
-3
Concentration (ng m )
An ample amount of data is available on the liquid and sludgephase musk concentrations in POTWs in many countries. To examine if Arizona POTWs are particular compared with similar other studies, we also measured musk concentrations in wastewater samples from aeration basins (Table 2). Measured liquid-phase concentrations of HHCB were 13600 and 25000 ng L1 at Plant A which, on average, are about two times the HHCB concentrations (12200 and 7800 ng L1) at Plant B. These concentrations are much higher than those found in the influents of a rural area of Kentucky and an urban area of Georgia (<1000 ng L1) (Horii et al., 2007), but are comparable to the concentrations reported for POTWs in New York (1780e12,700 ng L1) (Reiner et al., 2007) and in Europe (16600 10400 ng L1) (Simonich et al., 2002). In contrast to the AHTN reported in many POTWs influents in Europe (42e250 ng L1) (Berset et al., 2004; Ricking et al., 2003), it was not detected in the wastewater samples in the aeration basin in this study. Based on KOW and SW (Table 1), the percentage of
M il w
3.2.
HHCB and AHTN removed by sorption, and subsequent removal of solids by sedimentation/filtration, should be of the same order of magnitude for both. This suggests, therefore, that non-detection of AHTN is due to its concentration below our detection limit (42 ng L1) in the wastewater. Note that the concentrations reported are only the dissolved fraction and do not cover the total mass of musks in wastewater samples. Although we have measured one of the highest levels of HHCB (25000 ng L1) in wastewater, the concentrations seem comparable to other treatment plants in the world. Given their hydrophobic nature and volatility, water to air partitioning of synthetic musks, especially when the water is vigorously mixed with air, can lead to a significant concentration of airborne musks by POTWs. In the next section, we present atmospheric emission estimate of these compounds at a covered aeration basin with regulated air supply and defined cross-section of exhaust vent.
Particle phase HHCB AHTN
100 10 1 0.1 0.01
Pl
tA an
) (a Pl
tB an
O
te si ff-
) (a P at
) ) ) ) (c (c (d (d y a A A n e S S a S c i m ,U ,U fa rth er Ar ee an o e e , G k g c c i N U h al au an an ic AS ur gr gr ilw M R a M rf a fr ke n e e La id id ba r s s t U In u O
B nt la
) (a
na zo
) (a
y or ct fa
) (b
ry to
) (b
Fig. 1 e General occurrence of musk compounds in gas phase and particle phase in the atmosphere. References: aThis study; b Chen et al., 2007; cPeck and Hornbuckle, 2004; dXie et al., 2007.
1076
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 7 1 e1 0 7 8
degrade organics and oxidize nitrogen species. Volatile organics, many of which cause foul odors, are stripped from the water during aeration (Hwang et al., 1994; Krasner et al., 2009). Emission rates were estimated for Plant A using the amount of air supplied to the aeration basin and the measured concentrations of musk species (Fig. 2, details in SI Table S1). Assumptions included that no air leakage occurs in and between the aeration basin and OCU as well as that the rate of air supplied to the aeration basin is the same as the rate venting out from the OCU. Based on the vent diameter (0.762 m), number of vents (n ¼ 4) and the exhaust air speed (12 m s1), the rate of air supplied to the aeration basin was estimated to be 21.9 m3 s1. The overall emission flux was calculated using Eq. (1): 24 60 60 E ¼ cg A v 109
(1)
where E is the emission flux (g d1), A is the cross-sectional area of the vent (m2), v is the speed of exit air (m s1), and cg is the gas phase concentration (ng m3) of a musk compound. Emission fluxes of musk compounds were calculated based on their air concentrations inside the aeration basin. Gasphase emission of HHCB, on average, from the aeration basin is dominant (177 g d1), followed by AHTN (2.3 g d1) and ADBI (0.05 g d1). Note that the November 5 sample is not included in this average because concentrations of musks in this sample are substantially (factors of 3e9) higher than in the other two samples (see SI Table S1). Wastewater aeration emissions of synthetic musks are substantial, but are they the major source of musk species in the atmosphere? To test this, the amount of HHCB and AHTN observed at the urban site owing to Plant A was estimated using a Gaussian plume model (Pasquill, 1971). To calculate an upper limit concentration under the assumption that the site is directly downwind of the emission source, the
Gas phase 3
200
2
100
1
Aeration basin Odor control unit
-1
Emission (g d )
a 300
0 AHTN
0 HHCB
b
ADBI
ADBI
Particle phase Aeration basin Odor control unit
-1
Emission (g d )
0.30
AHTN
0.20 0.10 0.00 HHCB
AHTN Musk compound
Fig. 2 e Emission flux of gas and particle phase musk compounds from a covered POTW.
atmospheric concentration of a species due to the POTW at a receptor site can be estimated using a simplified Gaussian plume model: C¼
Qa pusy sz
(2)
where C is the gas phase concentration (ng m3) of the species at a receptor site due to an emission source, Qa is the steadystate emission (ng s1) of the species, u is the average wind speed (m s1), and sy and sz are the dispersion coefficients (m) in the lateral and vertical directions, respectively, and were estimated from the PasquilleGifford curves (Martin, 1976). sy and sz depend on the atmospheric stability (commonly categorized as very unstable, unstable, slightly unstable, neutral, slightly stable, and stable) and the distance downwind of emission source (Ragland, 1976). In the present case, Plants A and B were located about 8 and 40 km away from ASU, respectively. Assuming worst-case scenarios for various atmospheric stability conditions (unstable to stable and wind speed 0e5 m s1), the model predicted that Plant A’s contribution to gas phase HHCB and AHTN at ASU was not more than 10% of the measured value in any case. The emission rates for gas phase musks and atmospheric conditions used in Eq. (2) are given in SI Tables 1 and 2, respectively. These results imply that other musk sources must be substantial and that the aeration basin emissions are certainly not the exclusive source of urban musk concentrations. Other potential emission sources include the volatilization of these species from the usage of products containing synthetic musks and from wastewater transport and disposal processes, including biosolid dispersal.
3.4.
Effects of odor control unit on musk emissions
Activated carbon beds are used to control through sorption processes and surface chemistry the malodorous compounds in water and wastewater (Hwang et al., 1994; Westerhoff et al., 2005). Fig. 3 and Table 2 present the gas (and particle) phase concentrations of musk species before and after the odor treatment at Plant A. It is important to note that these observations are based on a limited number of samples with a time delay between the pre and post OCU sampling. The observations suggest a gas-phase AHTN decrease by more than 50% in the exhaust air and were significantly lower than in the aeration basin. On the other hand, the higher levels of particle-phase HHCB and AHTN in the exhaust air from the OCU than in the aeration basin resulted likely from the condensation of the gas-phase musks on existing particles in the OCU or during transport. In fact, the exhaust air (above the aeration basin) in the winter time is several degrees warmer (w30 C) than outside ambient air (10e20 C) and exhaust air is cooling rapidly on its way to and through the OCU favoring condensation of semivolatile species on existing particles. Highly variable concentrations of musk species, especially in the aeration basin, and sampling at aeration basin and OCU on different days could explain the discrepancy. Parallel sampling between the two locations and a larger sample size would provide better insights into the effectiveness of OCU and the atmospheric emissions of musk species.
-3
Concentration (ng m )
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 7 1 e1 0 7 8
a
Gas phase
400000
4000
300000
3000
200000
2000
100000
1000
0
0
-3
Concentration (ng m )
HHCB 150
Aeration basin Odor control unit
b
AHTN
Particle phase
100
50
0 AHTN Musk compound
Fig. 3 e Concentrations of musk compounds in the aeration basin and exhaust of an odor control unit in a covered POTW.
3.5. Volatilization as fate of musk species during sewage treatment Given the high volatilization rates of the musk species, volatilization of synthetic musks could be a substantial fate during treatment. The fraction of musk species lost by volatilization to the atmosphere (Fair) from the covered POTW (Plant A) was calculated using: Fair ¼
E 100% cw Q w
results are unclear. The Henry constant used by EPI (HC ¼ 31 Pa m3 mol1) is 3 times higher than the measured HC value (11.3 Pa m3 mol1) (Balk and Ford, 1999); hence EPI should tend to overestimate volatilization. One issue might be static considerations in the fate model as opposed to the active “stripping” that occurs in the aeration basins by bubbling air through the sludge. Further investigation is warranted to reconcile model and observations.
ADBI Aeration basin Odor control unit
HHCB
1077
(3)
where E is the emission flux (g d1) of the species in the gas phase (Table S1), cw is the average liquid-phase concentration of the species (g L1), and Qw is the sewage treatment capacity (L d1) of the plant. Fair for HHCB was estimated for the design treatment capacity Qw (6.8 107 L d1) of the plant with an average cw of 1.900 105 g L1. Using the estimated daily gas phase emission rate E from the previous section, the fraction of HHCB emitted to the air from the OCU (using Eq. (3)) was found to be 14 1%. This is a rough emission estimate because the plant might not be working at design capacity or the musk load could be higher when the sewage flow is low during dry season. The environmental fate of synthetic musk compounds can also be estimated using the Estimation Program Interface (EPI) Suite (v 4.00) (EPA, 2009). EPI is a Microsoft WindowsTM-based mathematical model that uses physicochemical properties of chemical species to derive their partitioning into air, water, and sludge phases. EPI estimates 93% removal of HHCB in POTWs, mostly (92%) through adsorption to sludge and a minor portion (>1%) by bacterial activity with less than 1% emission into air. This is in sharp contrast to our observations of more than 14% of HHCB emitted to the air in a POTW. The reasons for the diverging
4.
Conclusions
This study reveals that POTWs contribute to the environmental occurrence of musk species not only through wastewater and biosolids, but also through direct atmospheric emissions from aeration basins. Commonly used odor control systems do not appear to be efficient in the removal of synthetic musks. Results of this study suggest that atmospheric emissions are a substantial fate for these species in the sewage treatment process, although this is not reflected in a common fate model. While emissions by POTWs are substantial, they are by no means the only or even the dominant sources of synthetic musks in an urban atmosphere. Further work is warranted to improve our understanding of emission sources and strengths of atmospheric concentrations of these compounds.
Acknowledgements This project was funded by Science Foundation Arizona CAA 0284-08. The authors would like to thank the staff of the two unnamed utilities in the Phoenix (Arizona) Metro area for their cooperation. We are grateful to Prof. Matt Fraser and Andrea Clements for assistance with sample analysis and access to facilities and to Prof. Jeff Collett at Colorado State University for the loan of the sampler.
Appendix. Supplementary material Supplementary data related to this article can be found online at doi:10.1016/j.watres.2010.10.024.
references
Aschmann, S.M., Arey, J., Atkinson, R., Simonich, S.L., 2001. Atmospheric lifetimes and fates of selected fragrance materials and volatile model compounds. Environmental Science & Technology 35, 3595e3600. Balk, F., Ford, R.A., 1999. Environmental risk assessment for the polycyclic musks AHTN and HHCB in the EU - I. Fate and exposure assessment. Toxicology Letters 111, 57e79. Berset, J.D., Kupper, T., Etter, R., Tarradellas, J., 2004. Considerations about the enantioselective transformation of polycyclic musks in wastewater, treated wastewater and sewage sludge and analysis of their fate in a sequencing batch reactor plant. Chemosphere 57, 987e996.
1078
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 7 1 e1 0 7 8
Bitsch, N., Dudas, C., Korner, W., Failing, K., Biselli, S., Rimkus, G., Brunn, H., 2002. Estrogenic activity of musk fragrances detected by the E-screen assay using human MCF-7 cells. Archives of Environmental Contamination and Toxicology 43, 257e264. Buerge, I.J., Buser, H.R., Muller, M.D., Poiger, T., 2003. Behavior of the polycyclic musks HHCB and AHTN in lakes, two potential anthropogenic markers for domestic wastewater in surface waters. Environmental Science & Technology 37, 5636e5644. Chen, D.H., Zeng, X.Y., Sheng, Y.Q., Bi, X.H., Gui, H.Y., Sheng, G.Y., Fu, J.M., 2007. The concentrations and distribution of polycyclic musks in a typical cosmetic plant. Chemosphere 66, 252e258. EPA, 2009. Estimation Program Interface Suite for Microsoft Windows, V. 4.00. United States Environmental Protection Agency, Washington, DC, USA. HERA, 2004. Human & Environmental Risk Assessment on Ingredients of Household Cleaning Products: Polycyclic Musks AHTN (CAS 1506-02-1) and HHCB (CAS 1222-05-05) Environmental Section Ver. 2.0. Available online at: http:// www.heraproject.com/RiskAssessment.cfm. Horii, Y., Reiner, J.L., Loganathan, B.G., Kumar, K.S., Sajwan, K., Kannan, K., 2007. Occurrence and fate of polycyclic musks in wastewater treatment plants in Kentucky and Georgia, USA. Chemosphere 68, 2011e2020. http://www.wunderground. com/US/AZ/Phoenix.html (accessed October 7). Hwang, Y., Matsuo, T., Hanaki, K., Suzuki, N., 1994. Removal of Odorous compounds in Waste-water by using activated carbon, Ozonation and aerated Biofilter. Water Research 28, 2309e2319. Kolpin, D.W., Furlong, E.T., Meyer, M.T., Thurman, E.M., Zaugg, S. D., Barber, L.B., Buxton, H.T., 2002. Pharmaceuticals, hormones, and other organic wastewater contaminants in US streams, 1999-2000: a national reconnaissance. Environmental Science & Technology 36, 1202e1211. Krasner, S.W., Westerhoff, P., Chen, B.Y., Rittmann, B.E., Amy, G., 2009. Occurrence of disinfection Byproducts in United States wastewater treatment plant effluents. Environmental Science & Technology 43, 8320e8325. Luckenbach, T., Epel, D., 2005. Nitromusk and polycyclic musk compounds as long-term inhibitors of cellular xenobiotic defense systems mediated by multidrug transporters. Environmental Health Perspectives 113, 17e24. Martin, D.O., 1976. Comment on change of concentration standard Deviations with distance. Journal of the Air Pollution Control Association 26, 145e146. Paasivirta, J., Sinkkonen, S., Rantalainen, A.L., Broman, D., Zebuhr, Y., 2002. Temperature dependent properties of environmentally important synthetic musks. Environmental Science and Pollution Research 9, 345e355. Pasquill, F., 1971. Atmospheric dispersion of Pollution. Quarterly Journal of the Royal Meteorological Society 97, 369e395.
Peck, A.M., Hornbuckle, K.C., 2004. Synthetic musk fragrances in Lake Michigan. Environmental Science & Technology 38, 367e372. Peck, A.M., Hornbuckle, K.C., 2006. Synthetic musk fragrances in urban and rural air of Iowa and the Great Lakes. Atmospheric Environment 40, 6101e6111. Ragland, K.W., 1976. Worst-case ambient air concentrations from point sources using the Gaussian Plume model. Atmospheric Environment 10, 371e374. Reiner, J.L., Berset, J.D., Kannan, K., 2007. Mass flow of polycyclic musks in two wastewater treatment plants. Archives of Environmental Contamination and Toxicology 52, 451e457. Ricking, M., Schwarzbauer, J., Hellou, J., Svenson, A., Zitko, V., 2003. Polycyclic aromatic musk compounds in sewage treatment plant effluents of Canada and Sweden - first results. Marine Pollution Bulletin 46, 410e417. Rimkus, G.G., 1999. Polycyclic musk fragrances in the aquatic environment. Toxicology Letters 111, 37e56. Rimkus, G.G., Butte, W., Geyer, H.J., 1997. Critical considerations on the analysis and bioaccumulation of musk xylene and other synthetic nitro musks in fish. Chemosphere 35, 1497e1507. Roosens, L., Covaci, A., Neels, H., 2007. Concentrations of synthetic musk compounds in personal care and sanitation products and human exposure profiles through dermal application. Chemosphere 69, 1540e1547. Salvito, D., 2006. Correspondence. Marine Pollution Bulletin 52 (10), 1316. Schreurs, R., Legler, J., Artola-Garicano, E., Sinnige, T.L., Lanser, P. H., Seinen, W., van der Burg, B., 2004. In vitro and in vivo antiestrogenic effects of polycyclic musks in zebrafish. Environmental Science & Technology 38, 997e1002. Simonich, S.L., Federle, T.W., Eckhoff, W.S., Rottiers, A., Webb, S., Sabaliunas, D., De Wolf, W., 2002. Removal of fragrance materials during US and European wastewater treatment. Environmental Science & Technology 36, 2839e2847. Tas, J.W., Balk, F., Ford, R.A., vandePlassche, E.J., 1997. Environmental risk assessment of musk ketone and musk xylene in the Netherlands in accordance with the EU-TGD. Chemosphere 35, 2973e3002. Ternes, T.A., 1998. Occurrence of drugs in German sewage treatment plants and rivers. Water Research 32, 3245e3260. Westerhoff, P., Yoon, Y., Snyder, S., Wert, E., 2005. Fate of endocrine-disruptor, pharmaceutical, and personal care product chemicals during simulated drinking water treatment processes. Environmental Science & Technology 39, 6649e6663. Xie, Z.Y., Ebinghaus, R., Temme, C., Heemken, O., Ruck, W.G., 2007. Air-sea exchange fluxes of synthetic polycyclic musks in the North Sea and the Arctic. Environmental Science & Technology 41, 5654e5659.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 7 9 e1 0 8 6
Available at www.sciencedirect.com
journal homepage: www.elsevier.com/locate/watres
Biochemical oxygen demand and nutrient processing in a novel multi-stage raw municipal wastewater and acid mine drainage passive co-treatment system W.H. Strosnider a,*, B.K. Winfrey b, R.W. Nairn c,1 a
Saint Francis University, Environmental Engineering Department, 117 Evergreen Drive, Loretto, PA 15940, USA Department of Environmental Science and Technology, University of Maryland, 1426 Animal Sciences Building, College Park, MD 20742, USA c Center for Restoration of Ecosystems and Watersheds, University of Oklahoma, School of Civil Engineering and Environmental Science, 334 Carson Engineering Center, 202 W. Boyd St., Norman, OK 73019, USA b
article info
abstract
Article history:
A laboratory-scale, four-stage continuous flow reactor system was constructed to test the
Received 9 April 2010
viability of high-strength acid mine drainage (AMD) and municipal wastewater (MWW)
Received in revised form
passive co-treatment. The synthetic AMD had pH 2.60 and 1860 mg/L acidity as CaCO3
13 October 2010
equivalent with 46, 0.25, 2, 290, 55, 1.2 and 390 mg/L of Al, As, Cd, Fe, Mn, Pb and Zn,
Accepted 19 October 2010
respectively. The AMD was introduced to the system at a 1:2 ratio with raw MWW from the
Available online 28 October 2010
City of Norman, Oklahoma USA containing 265 94 mg/L BOD5, 11.5 5.3 mg/L PO3 4 , and 3 þ 20.8 1.8 mg/L NHþ 4 eN. During the 135 d experiment, PO4 and NH4 eN were decreased to
Keywords:
<0.75 and 7.4 1.8 mg/L, respectively. BOD5 was generally decreased to below detection
Phosphate
limits. Nitrification increased NO 3 to 4.9 3.5 mg/L NO3 eN, however relatively little
Nitrate
denitrification occurred. Results suggest that the nitrogen processing community may
Ammonium
require an extended period to mature and reach full efficiency. Overall, results indicate
Sewage
that passive AMD and MWW co-treatment is a viable ecological engineering approach for the developed and developing world that can be optimized and applied to improve water quality with minimal use of fossil fuels and refined materials. ª 2010 Elsevier Ltd. All rights reserved.
1.
Introduction
Acid mine drainage (AMD) and municipal wastewater (MWW) are common environmental liabilities whose sustainable treatment is central to maintaining global water resource quality and conserving energy resources. Untreated AMD degrades water resources in coal and metal mining regions globally (Wolkersdorfer and Bowell, 2004a, 2004b, 2004c). Discharges of untreated MWW degrade water resources in
many developing nations (Gadgil, 1998; Nelson et al., 2001). In developed nations, where MWW is generally addressed actively (e.g., mechanical clarification, activated sludge, rotating biological contactors, etc.), treatment usually consumes substantial fiscal, material and energy resources (Muga and Mihelcic, 2008). Conventional active MWW and AMD treatment methods are commonly energy-intensive with higher operational and maintenance costs when compared to passive treatment approaches (Nelson et al.,
* Corresponding author. E-mail addresses:
[email protected] (W.H. Strosnider),
[email protected] (B.K. Winfrey),
[email protected] (R.W. Nairn). 1 Tel.: þ405 325 3354. 0043-1354/$ e see front matter ª 2010 Elsevier Ltd. All rights reserved. doi:10.1016/j.watres.2010.10.026
1080
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 7 9 e1 0 8 6
2001; Younger et al., 2002; Mannino et al., 2008; Muga and Mihelcic, 2008). Passive methods (e.g., treatment wetlands, soil filters, trickling filters, etc.) generally require larger land areas and higher construction costs when compared to active methods. Passive treatment can be considered an application of ecological engineering, which entails “the design of sustainable ecosystems that integrate human society with its natural environment for the benefit of both” (Mitsch, 1996). Renewable energy and natural unprocessed material flows must outweigh those of fossil fuel and refined material in ecological engineering applications (Mitsch and Jorgensen, 2004). Conventional MWW treatment generally consumes considerable economic, energy and material resources. Mechanical aeration, sludge scraping, clarifier skimming, sludge/effluent pumping, ultraviolet disinfection and other conventional MWW treatment practices require substantial energy, often supplied by non-renewable resources (Metcalf and Eddy Inc., 1991; Mannino et al., 2008; Muga and Mihelcic, 2008). Excess P and/or suspended solids are commonly removed from MWW by alum or ferric iron salt dosing (Metcalf and Eddy Inc., 1991; Omoike and Vanloon, 1999). Alum or ferric iron salt dosing can be relatively expensive and coagulant/flocculant demand has increased over recent decades (Ouellette, 1996; Hoffman, 2004; Kirschner, 2006) due in part to stricter P discharge standards (Jarvis, 2000; Hoffman, 2004). The passive co-treatment of AMD and MWW is a nascent application of ecological engineering that blends aspects of passive AMD treatment and conventional active MWW treatment. The passive treatment of AMD often requires suitable organic substrate electron donors for dissolved oxygen (DO) stripping, bacterial sulfate reduction (BSR) and the bacterially-mediated reduction of metals, such as Fe. Conventional active MWW treatment can require electron acceptors for bacterial oxidation of carbon substrate, chemicals for pathogen removal, and physical or chemical filtration or flocculation for solids or P removal. In theory, the requirements of both AMD and MWW treatment can be met within the same system, as each effluent possesses properties and constituents that can be passively utilized by the other. Effective MWW treatment is required to safeguard receiving water bodies from eutrophication and subsequent environmental degradation. Generally, MWW treatment must address suspended solids, P, N and oxygen demand concentrations. Suspended solids can be removed by biodegradation, flocculation, settling or filtration (Metcalf and Eddy Inc., 1991). P and suspended solids concentrations can be decreased by flocculation with free Al(III) and Fe(III) ions (Omoike and Vanloon, 1999; Parsons and Smith, 2008). Adler and Sibrell (2003) and Wei et al. (2008) demonstrated that soluble phosphorus will sorb to pre-existing AMD floc. AMD has been used to create coagulants for MWW and drinking water treatment (Menezes et al., 2010). MWW nitrogen processing generally requires sequential nitrification and denitrification (Metcalf and Eddy Inc., 1991). Bacterial populations central to AMD treatment, such as aerobic heterotrophs, iron reducing bacteria (IRB), and sulfate reducing bacteria (SRB) as well as their associated supporting communities require sufficient nutrients for optimum operation (Neculita et al., 2007). Often,
BSR substrate is supplemented with N and/or P to encourage greater SRB activity (Kaksonen and Puhakka, 2007). Oxygen demand is a function of the concentration of biodegradable organic matter, nutrients and readily oxidized constituents. Oxygen demand can be lowered by bacterial respiration or reaction of labile organic matter and nutrients. For example, aerobic heterotrophs, SRB, IRB and denitrifying bacteria utilize short-chain labile organic carbon thus lowering oxygen demand. Although Roetman (1932) first suggested mixing AMD with MWW for pathogen removal, and despite the amount of aforementioned peripheral research, only two systems have been encountered in the literature that were intentionally constructed to simultaneously treat these effluents. Johnson and Younger (2006) built a field-scale single-stage constructed wetland treatment system that successfully improved the water quality of weak secondary MWW effluent (w14 mg/L BOD5) and relatively weak (net-alkaline with w3 mg/L Fe) AMD. The system described in this manuscript was intended as a proof of concept and is the first attempt to simultaneously co-treat high-strength AMD and MWW. Strosnider et al. (in press) and Winfrey et al. (2010) documented highly effective metals and fecal indicator bacteria processing within the same system as described in this manuscript. Strosnider et al. (in press) documented dissolved Al, As, Cd, Fe, Mn, Pb and Zn concentrations consistently decreased by 99.8, 87.8, 97.7, 99.8, 13.9, 87.9 and 73.4%, respectively, pH increase to 6.79, and net acidic influent conversion to net-alkaline effluent. Winfrey et al. (2010) noted a 100% reduction in total coliforms, fecal coliforms, Escherichia coli, and fecal streptococci. To fully ascertain the promise of co-treatment, the objectives of this study were to determine the processing efficiencies of key MWW components (BOD5, nitrogen and phosphorus) in the high-strength AMD and raw MWW co-treatment system.
2.
Methods
2.1.
Experimental design
The experimental setup involved four serial unit processes in quadruplicate (Fig. 1). The first unit processes were primary clarifiers in basins for MWW and AMD mixing to raise AMD pH to that less inhibitory to BSR, metals complexation with organic ligands, Fe and Al flocculation with P and suspended solids, Fe(III) and SO4 reduction, DO stripping and BOD processing via heterotrophic bacterial activity and solids settling. The second and third unit processes together emulated a reducing and alkalinity producing system (RAPS), which are common unit processes in AMD treatment. The upper column sections of the RAPS emulations columns, which were filled with inert biomedia, were designed to encourage further DO stripping, BOD5 processing, Fe(III) reduction and BSR. The bottom of the columns was filled with limestone for abiotic alkalinity generation via calcite dissolution and to encourage further BSR. The final unit processes were aerobic wetland mesocosms for further BOD processing via the activity of aerobic heterotrophic and denitrifying bacteria, sequential Fe then Mn oxidation and precipitation, as well as the removal of
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 7 9 e1 0 8 6
Fig. 1 e Conceptual experimental layout. C1e4 represent the clarifiers, K1e4 the Kaldnes, L1e4 the limestone and W1e4 the wetlands. Black dots indicate sampling points.
remaining As, Cd, Pb and Zn via sorption to Fe oxyhydroxides. Each unit process was connected to the next via clear vinyl tubing and sampled at its outflow. The primary clarifier unit process was sized for a relatively high retention time of 32 h for more complete mixing through passive diffusion, and to encourage bacterial activity and thorough solids settling of the light flocculant created. Retention times of 1.5e2.5 h are typical for MWW primary clarification systems (Metcalf and Eddy Inc., 1991). However, retention times of around 6 h or greater commonly exist where further sedimentation or biological activity is desired (Gernaey et al., 2001). Fe oxyhydroxide particles are relatively low in density and small in particle size, thus also necessitating greater residence times than those typically noted in MWW clarification (Younger et al., 2002). Four-cm deep single transverse baffles and 2.5-cm radius semi-circular weirs served as the physical structures in the low density polyethylene (LDPE) basins that comprised this unit process. Sludge was wasted from the bottom of the clarifiers under gravity flow with a barbed high density polyethylene (HDPE) T-connector attached to an HDPE valve and clear vinyl tubing. The RAPS emulation columns were 91.5 cm in height and 12.5 cm in diameter. The bottom 38 cm of the columns were filled with high quality (>90% CaCO3) limestone washed of all fines and separated by sieve analysis adapted from ASTM
1081
D422 with the fraction passing a 2.54-cm sieve yet retained by a 1.27-cm sieve. The remaining top 53.5 cm of the columns were packed with Kaldnes K3 biofilm media to provide bacterial biofilm attachment surface. Kaldnes K3 media are polyethylene high surface area (500 m2/m3) components that are typically used in moving bed biofilm wastewater and drinking water treatment (Saliling et al., 2007). Following Pruden et al. (2007) findings of the importance of inoculation to sulfate reducing bioreactor performance, the Kaldnes zone was inoculated with 100 mL of RAPS substrate from two mature passive coal mine AMD treatment systems in Pittsburg and Latimer Counties, OK. Each column was wrapped in aluminum foil to emulate the lightless conditions in RAPS substrate. Residence times were 42 and 18 h for the Kaldnes and limestone stages, respectively. The aerobic constructed treatment wetland mesocosms were two shallow LDPE storage containers. Each wetland was bisected longitudinally with plastic to create the necessary four treatment trains. Wetland soil was collected from an existing constructed mitigation wetland at the Midwest City, Oklahoma MWW Treatment Plant. The surface flow mesocosms were planted with Hydrocotyle ranunculoides and Nasturtium officinale. The wetlands were placed under timed grow-lights on a 12 h/ d cycle. Wetland residence time was 67 h. Raw MWW collected after grit screening at the Norman, OK MWW treatment plant and synthetic AMD approximating that found at Cerro Rico de Potosı´, Bolivia were introduced to the system at a 2:1 ratio (MWW:AMD) with peristaltic pumps at a combined flow rate of (3.8 L/d). Each treatment train continuously handled influent for 135 d. The system was gravity flow from the first (clarifier) to the last (wetland) unit processes. MWW was collected weekly, homogenized during pumping and refrigerated at 4 C before introduction to the system. AMD was prepared weekly and stored at room temperature (20 C) until use. All unit processes were maintained at room temperature throughout the experiment. Sludge was wasted from the clarifiers in varying amounts at irregular intervals to average 0.69% of the combined inflow over the duration of the experiment as to not allow sludge buildup to reduce retention time.
2.2.
Data collection
An Accumet AR60 multimeter was used to determine temperature and DO concentrations. BOD5 was determined using the 5day BOD test following standard methods (APHA, 1998). Samples 3 for anions (Cl, F, NO 2 , NO3 , and PO4 ) were immediately filtered through Dionex OnGuard II H cartridges and 0.2-mm nylon filters then quantified with a MetrOhm 761 compact ion chromatograph unit following EPA method 300. NHþ 4 samples were immediately processed using the Hach high-range Test ’N Tube salicylate method (Hach, 2002). Following Sharp et al. (1995), water samples for dissolved organic carbon (DOC) and dissolved total nitrogen (DTN) were immediately filtered through 0.45-mm nylon filters and stored at <0 C in 40-mL amber glass EPA vials with polypropylene caps and Teflon septa until quantification with an Analytik Jena multi N/C 2100. Biological activity reaction tests (BART) by Droycon Bioconcepts Inc. (DBI) and the MPN technique were applied to estimate bacterial populations. BART tests were conducted to determine estimates of fermentative, nitrifying and denitrifying bacteria
1082
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 7 9 e1 0 8 6
concentrations. BART tubes were incubated at 22 C and read every 12 or 24 h. DBI QuickPop software was used to estimate populations. The most probable number (MPN) technique for enumeration of fermentative bacteria followed Pepper et al. (1995) using test tubes with Durham tubes containing phenol red broth with lactose from Becton Dickinson Diagnostic Systems. Triplicate test tubes were inoculated in an anaerobic nitrogen-filled chamber for a dilution range of 101e108 and incubated for 24 h at 37 C. MPN results were interpreted using guidance and tables from Woomer (1994). Percent coverage of each wetland plant species was estimated at days 29, 75, 94, 99, 112, 130 and 133 using digital photography. Sampling generally occurred bi-monthly during this standard operational run for a total of ten sampling events. BOD5 and anion samples were taken throughout the entire experiment. NHþ 4 samples were taken for the last five sampling events. DOC and DTN samples were only taken during the final two sampling events. Water samples for MPN tests were taken from the columns on the final sampling event (day 133). BART tests were initiated on days 85, 112, 123, and 130.
(289 19.8 mg/L as CaCO3 equivalent), BOD5 (265 94 mg/L), Cl (69 3.8 mg/L) and SO2 4 (70 16 mg/L) concentrations place the MWW used between the “medium” and “strong” designations of MWW established by Metcalf and Eddy Inc. (1991). The mean MWW DOC and DTN were 42 and 30 mg/L, respectively, and DO was 0.98 mg/L. Although the AMD influent characteristics were consistent, some MWW influent parameters, such as BOD5 and PO3 4 (11.5 5.3 mg/L), varied somewhat throughout the experiment. This variation is to be expected and is typical of loadings experienced by conventional wastewater treatment plants (Metcalf and Eddy Inc., 1991). However, MWW alkalinity, Cl, F (1.0 0.09 mg/L), NHþ 4 eN (20.8 1.8 mg/L), NO2 eN (<0.08 mg/L), and NO3 eN (<0.11 mg/L) were relatively consistent.
3.2.
Phosphorus
3.
Results and discussion
PO3 4 was significantly decreased from the theoretical influent mix 7.7 3.5 mg/L to <0.75 mg/L by the clarifier outflow, producing a removal rate of 0.69 g m2 d1 (5.6 g m3 d1). Flocculation with Al(III) and Fe(III) (e.g., Omoike and Vanloon, 1999; Parsons and Smith, 2008) or sorption to pre-existing AMD floc (e.g., Adler and Sibrell, 2003; Wei et al., 2008) were the likely primary removal mechanisms. Stoichiometrically, more than enough Fe and Al were removed from solution in removal. The the clarifier to account for the observed PO3 4 removal indicates that observed thorough and rapid PO3 4 higher removal rates may be possible in an optimized system. as The multi-stage co-treatment system removed PO3 4 well as conventional MWW treatment plants and better than conventional treatment wetlands and the single-stage cotreatment system described by Johnson and Younger (2006). The extent and rate of PO3 4 removal noted in the clarifier is similar to that observed in conventional MWW treatment plants that incur significant costs via additional intensive treatment steps or flocculant dosing (Metcalf and Eddy Inc., 1991; Parsons and Smith, 2008). Assuming that influent P was primarily in the form of PO3 4 , the removal rate in the clarifier was greater than 90% of free water surface (FWS) wetlands, the majority of which received tertiary or secondary concentrations (Kadlec and MWW influent with lower PO3 4 Wallace, 2009). The Johnson and Younger (2006) single-stage yet co-treatment system treated MWW with 39% less PO3 4 removed 10e50%, a much lower removal efficiency and rate than was observed in the multi-stage co-treatment system clarifier. Results indicate that PO3 4 removal is enhanced by cotreatment with higher strength AMD that contains greater concentrations of Al and Fe.
3.1.
Influent characteristics
3.3.
2.3.
Data analysis
Because direct sampling of the clarifier influent mix was impossible due to the experimental design, the theoretical influent mix (TMix) chemical composition was calculated using the ratio of AMD to MWW. To account for dilution, TMix concentrations were used to calculate processing efficiencies and rates. To facilitate the calculation of means and application of statistical tests, values below detection limits were assigned one half the value of the detection limit (Miller and Miller, 1986). Prior to means or median testing, all data sets were tested for normality with the AndersoneDarling test and similarity of variance. Due to the prevalence of normality and unequal variances, Welch’s ttest was applied for all DTN and DOC comparisons. The nonparametric KruskaleWallis Multiple Comparisons test was used to determine statistical difference between the medians of the remaining data sets due to the prevalence of unequal variances and non-normality. Because estimated plant coverage and NO 3 were not measured on the same days, a second order polynomial mathematical model of percent estimated coverage was created for each wetland. All statistical testing was completed with Minitab version 15. All comparisons of measures of central tendency hereafter mentioned were backed by the statistical analyses to achieve 95% confidence.
The high-strength synthetic AMD was similar in composition to that generated in the base/precious metal mining district of Cerro Rico de Potosı´, Bolivia where untreated high-strength AMD and raw MWW pollute the headwaters of the Rio Pilcomayo (Strosnider and Nairn, 2010). The AMD had pH 2.6, 7.69 mg/L DO, 0.41 mg/L NO 3 eN, 0.29 mg/L DTN, 0.0 mg/L DOC, and 1860 mg/L acidity as CaCO3 equivalent with 46, 0.25, 2, 290, 55, 1.2 and 390 mg/L of dissolved Al, As, Cd, Fe, Mn, Pb and Zn, respectively (Strosnider et al., in press). The mean alkalinity
Nitrogen
The multi-stage co-treatment system demonstrated promising nitrification rates yet underperformed with regards concentrations were statistically to denitrification. NO 3 unchanged until the wetland where they significantly increased to 4.94 3.49 mg/L NO 3 eN due to nitrification, for an average rate of 0.036 g N m2 d1. Nitrification requires oxygen and did not occur in the first three unit processes where DO was 1.68 0.65, 0.71 0.10, and 0.72 0.12 mg/L in the clarifier, Kaldnes and limestone, respectively. For the final
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 7 9 e1 0 8 6
five sampling events, mean wetland NHþ 4 eN removal (7.76 mg/L) compared well with NO 3 eN increase (6.95 mg/L), indicating that minimal denitrification occurred for this period on average. However, the DTN data taken for the final two sampling events indicated that N removal, and hence denitrification, eventually occurred. DTN was not significantly changed until it decreased within the wetlands from 18 to 12 mg/L N. BART results indicated that nitrifying bacteria were not aggressive until the wetlands as well, where 103 cfu/mL were detected. Denitrifying bacteria concentrations were 101e106 cfu/mL throughout the first three unit processes, however there was little NO 3 available. Denitrifying bacteria ranged from 102 to 105 cfu/mL in the wetlands. Conventional MWW treatment plants and passive treatment wetlands generally process N better than the multistage co-treatment system. Conventional MWW treatment plants commonly nitrify and denitrify more effectively with less retention time than the multi-stage co-treatment system (e.g., Koivunen et al., 2003; Tandukar et al., 2007). FWS and horizontal sub-surface flow (HSSF) treatment wetlands have been found to process TN and NO 3 effectively (Kadlec and Wallace, 2009), unlike the multi-stage co-treatment system. The wetland unit process nitrification rate was an order of magnitude less than the mean FWS and HSSF wetland rates (Kadlec and Wallace, 2009) indicating that nitrification may have been substantially inhibited. Because AMD generally limits bacterial activity (Niyogi et al., 2003), microbial nitrification and denitrification as well as nitrogen assimilation could be relatively decreased in the system. Although pH was circumneutral and the other AMD metals were decreased to below concentrations of concern, Zn was orders of magnitude above typical background concentrations from the wetland inflow to outflow (Strosnider et al., in press). Wetland denitrification was likely primarily limited by DO concentrations which averaged 4.4 mg/L at the wetland outflow and/or the lack of labile carbon substrate, evidenced by BOD5 being generally driven to below detection limits by the wetland outflow. Johnson and Younger (2006) documented nitrification and denitrification within the single-stage co-treatment wetland where Zn concentrations were near background levels, another indication that Zn was a possible inhibiting factor for nitrification and/or denitrification. Nitrification and denitrification has also been documented in constructed wetlands treating Fe-rich AMD with elevated NHþ 4 (Demin and Dudeney, 2003). However, the multi-stage co-treatment system did not appear to have reached N treatment equilibrium and this may have been due to the dynamic nature of the wetland plant community and substrate influencing the microbial community. The wetlands were initially dominated by N. officinale (60e85% at day 29) which quickly became stressed, exhibited chlorosis, and died off by day 75 to remain <4% coverage throughout the remainder of the experiment. Hydrocotyle verticillata, which displayed no stress throughout the experiment, replaced the N. officinale to increase from 10e35% at day 29 to 72e95% by day 133. The second order polynomial model created for estimated total plant coverage of each wetland from days 75 to 133 had R2 values of 0.98, 0.89, 0.91 and 0.95, for wetlands 1e4, respectively, demonstrating a tight fit to the data. Few wetland plant species are tolerant of highly elevated metals
1083
concentrations (Younger et al., 2002), and it appears N. officinale was not. However, H. verticillata was tolerant of the highly elevated Zn (64.7e34.3 mg/L) and Fe (45.1e0.18 mg/L) present from the wetland inflow to outflow (Strosnider et al., in press). The nitrification rate increased over the duration of the 2 1 d at day 20 to 0.091 g experiment from 0.012 g NO 3 eN m 2 1 d at day 133, indicating that the nitrifying NO3 eN m community was maturing throughout the experiment and likely not reached maximum efficiency (Figs. 2 and 3). Wetland outflow NO 3 eN concentrations were positively correlated with time after experiment initiation (Pearson’s correlation coefficient 0.859, p < 0.001) as well as modelled estimated plant coverage (Pearson’s correlation coefficient 0.636, p ¼ 0.001). Nitrification can be enhanced by aquatic macrophyte oxygen transfer to substrate (Kadlec and Wallace, 2009), which would have increased over time in the wetland due to the increasing vitality of the plant community. In an FWS wetland treating NHþ 4 and Fe-rich AMD, Demin and Dudeney (2003) noted no nitrification for the first three years and that six years were necessary for optimization. Demin and Dudeney (2003) posit that the buildup of Fe oxyhydroxide floc created more suitable nitrifying community substrate. No Fe oxyhydroxide floc was present in the multistage co-treatment wetland at experiment initiation. However, approximately 0.3 cm of Fe oxyhydroxide floc was noted to cover the multi-stage co-treatment wetland substrate by the conclusion of the experiment, which following Demin and Dudeney (2003) would have been a more suitable setting for nitrifying bacteria. The lag in nitrification performance may also be attributed to the time necessary for natural selection and horizontal gene transfer (e.g., BakerAustin et al., 2006) to shape an efficient nitrifying community suited to the unique setting and stresses of the wetland. Regardless, the findings of Demin and Dudeney (2003) buttress the supposition that the multi-stage co-treatment N removal performance had not reached optimum efficiency by the termination of the experiment.
3.4.
Biochemical oxygen demand
The system demonstrated consistently efficient BOD5 processing (Table 1). Although BOD5 could not be tracked throughout the entire system due to highly elevated concentrations of chemical oxygen demand unrelated to the MWW, DOC can be a suitable proxy for tracking BOD5 (Khan et al., 1998; Servais et al., 1999). DOC was dramatically and significantly decreased in the clarifier (mean 28e5.1 mg/L C). A further significant DOC decrease was noted from the wetland influent to effluent (mean 6.2e2.5 mg/L C). Sedimentation aided by flocculation with Al(III) or Fe(III) likely decreased BOD5 and DOC in the clarifiers (e.g., Metcalf and Eddy Inc., 1991; Omoike and Vanloon, 1999). The activity of various heterotrophic microbes (i.e., SRB, denitrifiers, fermenters, IRB, and aerobic heterotrophs) likely served to decrease BOD5 and DOC throughout the system. BART results indicated that gram-negative fermenting bacteria were present in concentrations of 102e103 cfu/mL in the limestone and wetlands. MPN results were lower, with 101.83 and 101.76 cells/mL of fermentative bacteria present in the Kaldnes and limestone unit processes, respectively. Substantial SRB and IRB
1084
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 7 9 e1 0 8 6
populations were also present throughout the system (Strosnider et al., in press). The aforementioned mechanisms resulted in BOD5 processing to below detection limits and an overall systemic removal rate of 1.14 g m2 d1 or 22.3 g m3 d1. However, BOD5 exertion can be decreased by elevated concentrations of heavy metals. Mittal and Ratra (2000) noted that Zn in concentrations of 20 and 50 mg/L decreased BOD5 exertion by 28.7 and 37.5%, respectively. Because the wetland outflow BOD5 was below or near detection limits, the mean 34.3 mg/L Zn present did not substantially impact overall removal performance. It appears as though BOD5 was successfully processed despite concentrations of Al in the clarifiers and Kaldnes as well as Zn throughout the system that Mittal and Ratra (2000) found to be inhibitory to BOD5 exertion. The multi-stage co-treatment system processed BOD5 as well or better than conventional municipal wastewater treatment plants (MWWTPs), treatment wetlands and the single-stage wetland co-treatment wetland. BOD5 processing was more complete than is often documented in conventional MWWTPs, which commonly produce effluent with BOD5 of 5e30 mg/L (e.g., Koivunen et al., 2003; Tandukar et al., 2007; Jamwal et al., 2009). However, conventional MWWTPs often have much lower residence times (Metcalf and Eddy Inc., 1991). The BOD5 processing of the multi-stage co-treatment system also outperformed the three primary types of MWW treatment wetlands: FWS, HSSF, and vertical flow (VF). Compared to the annual mean treatment performance of 136 FWS wetlands, the system produced effluent with BOD5 less than the vast majority treating tertiary MWW (influent BOD5 < 30 mg/L) and all FWS treating primary and secondary MWW (Kadlec and Wallace, 2009). Compared to the annual mean treatment performance of 202 HSSF wetlands, the system produced effluent with BOD5 less than the vast majority treating tertiary MWW and all HSSF wetlands treating primary and secondary MWW (Kadlec and Wallace, 2009). The system produced effluent with BOD5 less than the annual mean treatment performance of the vast majority of 62 VF wetlands, (Kadlec and Wallace, 2009). The system drove BOD5 to below typical background concentrations in natural 21
90
98
18
wetlands and treatment wetlands (Kadlec and Wallace, 2009). Johnson and Younger (2006) reported 20e75% removal in a single-stage co-treatment wetland with a mean residence time of 14 h receiving secondary MWW with only w14 mg/L BOD5. Although the residence time of the multi-stage co-treatment system was 10 times that of the Johnson and Younger (2006) system, the multi-stage system demonstrated much more complete BOD5 removal while handling MWW with a BOD5 concentration approximately 19 times greater.
3.5.
Sustainability
Full-scale AMD and MWW passive co-treatment systems may result in fossil fuel, refined material, and cost savings. The Kaldnes biomedia used in this experiment could be substituted with any high surface area naturally occurring material, such the nonreactive river rock used in conventional MWW treatment trickling filter systems (e.g., Metcalf and Eddy Inc., 1991). Without the use of plastic in the Kaldnes stage, field-scale co-treatment systems with the same unit processes could be constructed primarily with
111 118
15 NH4+-N mg/L
Fig. 3 e Mean NOL 3 eN concentrations from the TMix to the system outflow for each sampling period. Bars are shaded according to the d elapsed from experiment initiation to the sampling event. Error bars represent one standard deviation above and below the mean.
133
Table 1 e BOD5 concentrations in the influent MWW, TMix, and each treatment train’s wetland outflow (W1e4).
12 9
Day
MWW
TMix
W1
W2
W3
W4
1.92 <1.24 2.30 2.06 <1.35 <1.16 <1.04 2.22 1.31 <1.47
1.50 <1.24 2.40 3.10 <1.35 <1.16 <1.04 <0.98 1.27 <1.47
3.24 1.63 2.50 2.11 <1.35 <1.16 <1.04 1.15 1.47 <1.47
mg/L
6 3 0 TMix
Clarifier
NHD 4 eN
Kaldnes
Limestone
Wetland
Fig. 2 e Mean concentrations from the TMix to the system outflow for the last five sampling periods. Bars are shaded according to the d elapsed from experiment initiation to the sampling event. Error bars represent one standard deviation above and below the mean.
20 34 55 69 83 90 98 111 118 133
472 296 236 148 227 251 256 320 302 141
311 195 156 97 150 166 169 211 199 93
3.49 1.24 2.10 <1.42 <1.35 <1.16 <1.04 2.38 <1.03 <1.47
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 7 9 e1 0 8 6
unrefined, low embodied energy (emergy) materials (e.g., earthen berms, limestone, concrete) (Odum, 1996). Aside from low emergy construction, these systems could be operated using gravity flow without ongoing purchased energy inputs, as was demonstrated in this manuscript. A field-scale passive co-treatment system could use commonly engineered structures, such as ponds, aerobic wetlands, clarifiers, and vertical flow bioreactors, which could decrease engineering costs. Significant cost savings would result from eliminating the need to purchase and transport organic substrate, often a major cost of passive AMD treatment. Cost savings would also result by using AMD as a coagulant/flocculant and disinfectant for MWW treatment. In addition, the use of MWW as a substrate consumes an item with negative societal value in the place of valuable organic substrate, such as the compost or refined low molecular weight carbon sources (e.g., methanol) often used in AMD treatment (Younger et al., 2002). Raw MWW and high-strength AMD are often not independently addressed with passive methods because of the limitations of conventional passive treatment technologies and/or the lack of locally available suitable carbon substrate (Younger et al., 2002; Kadlec and Wallace, 2009). No instance of active co-treatment of AMD and MWW was encountered in the literature. The efficiency and rate of which both waste streams can be passively treated within the same system will determine the extent of energy, material and cost savings from reduced system footprint.
4.
Conclusions
These results, coupled with the metal removal performance and fecal indicator bacteria sterilization noted in Strosnider et al. (in press) and Winfrey et al. (2010), indicate that multistage passive co-treatment is capable of highly efficient processing of both AMD and MWW constituents. The lack of denitrification may be addressed by an effluent return loop to increase denitrification similarly applied in conventional MWW treatment for enhanced denitrification (e.g., Metcalf and Eddy Inc., 1991). The initial anaerobic unit processes should be suitable to denitrify recycled nitrate-rich effluent. Because the true nitrification potential was not yet observed, longer-term experiments to determine the maximum steady-state nitrification rate may be necessary. There is also the possibility of combining aspects of co-treatment with conventional MWW treatment, such as the use of AMD as a flocculant-source for PO3 4 removal, to create more efficient hybrid facilities which, along with passive co-treatment systems such as the one described in this study, present considerable energy, material and cost savings opportunities. As high-strength AMD and MWW passive co-treatment has proven a viable approach backed by theory and experimental results, field pilot studies are a logical next step.
Acknowledgments Drs. Keith Strevett and David Sabatini of the University of Oklahoma School of Civil Engineering and Environmental
1085
Science provided important experimental design guidance. Special thanks are extended to Beatriz Santamaria, Ronald Conlon, Alex Brewer, Jonathan Clifton, Darcy Lutes, Julie LaBar, Srividhya Viswanathan and other University of Oklahoma Center for Restoration of Ecosystems and Watersheds personnel for laboratory assistance. This study would have been impossible without the support provided by Darrell Schwartz and other City of Norman Municipal Wastewater Treatment Plant staff. Funding was provided by U.S. EPA Agreement FY04 104(b)(3) X7-97682001-0, USGS Agreement 04HQAG0131 and the University of Oklahoma Center for Restoration of Ecosystems and Watersheds.
references
Adler, P.R., Sibrell, P.L., 2003. Sequestration of phosphorus by acid mine drainage floc. Journal of Environmental Quality 32, 1122e1129. American Public Health Association (APHA), 2005. Standard Methods for the Examination of Water and Wastewater, twenty first ed.. Baker-Austin, C., Ramunas, S., McArthur, J.V., 2006. Coselection of antibiotic and metal resistance. Trends in Microbiology 14 (4), 176e182. Demin, O.A., Dudeney, A.W.L., 2003. Nitrification in constructed wetlands treating ochreous mine water. Mine Water and the Environment 22, 15e21. Gadgil, A., 1998. Drinking water in developing countries. Annual Review of Energy and the Environment 23, 253e286. Gernaey, K., Vanrolleghem, P.A., Lessard, P., 2001. Modeling of a reactive primary clarifier. Water Science and Technology 43 (7), 73e81. Hach, 2002. Water Analysis Handbook Loveland, Colorado. Hoffman, J., 2004. Aluminum sulfate prices rise with demand and costs. Chemical Market Reporter 266 (19), 27. Jamwal, P., Mittal, A.K., Mouchel, J., 2009. Efficiency evaluation of sewage treatment plants with different technologies in Delhi (India). Environmental Monitoring and Assessment 153, 293e305. Jarvis, L., 2000. PAC faces renewed pressure from tight supplies, rising costs. Chemical Market Reporter 257 (17), 29. Johnson, K.L., Younger, P.L., 2006. The co-treatment of sewage and mine waters in aerobic wetlands. Engineering Geology 85, 53e61. Kadlec, R.H., Wallace, S.D., 2009. Treatment Wetlands. CRC Press LLC. Kaksonen, A.H., Puhakka, J.A., 2007. Sulfate reduction based bioprocesses for the treatment of acid mine drainage and the recovery of metals. Engineering in Life Sciences 7 (6), 541e564. Khan, E., Babcock, R.W., Viriyavejakul, S., Suffet, I.H., Stenstrom, M.K., 1998. Biodegradable dissolved organic carbon for indicating wastewater reclamation plant performance and treated wastewater quality. Water Environment Research 70 (5), 1033e1040. Kirschner, M., 2006. Ferric chloride. Chemical Market Reporter 270 (1), 34. Koivunen, J., Siitonen, A., Heinonen-Tanski, H., 2003. Elimination of enteric bacteria in biological-chemical wastewater treatment and tertiary filtration units. Water Research 37, 690e698. Mannino, I., Franco, D., Piccioni, E., Favero, L., Mattiuzo, E., Zanetto, G., 2008. A cost-effectiveness analysis of seminatural wetlands and activated sludge wastewater-treatment systems. Environmental Management 41, 118e129.
1086
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 7 9 e1 0 8 6
Menezes, J.C.S.S., Silva, R.A., Arce, I.S., Schneider, I.A.H., 2010. Production of a poly-alumino-iron sulphate coagulant by chemical precipitation of a coal mining acid drainage. Minerals Engineering 23 (3), 249e251. Metcalf and Eddy, Inc., 1991. Wastewater Engineering: Treatment, Disposal and Reuse, third ed. McGraw Hill. Miller, J.C., Miller, J.N., 1986. Statistics for Analytical Chemistry. Ellis Horwood Ltd, UK. Mitsch, W.J., 1996. Ecological engineering: a new paradigm for engineers and ecologists. In: Schulze, P.C. (Ed.), Engineering within Ecological Constraints. National Academy Press, Washington, DC. Mitsch, W.J., Jorgensen, S.E., 2004. Ecological Engineering and Ecosystem Restoration. John Wiley & Sons, Inc., New York, p. 411. Mittal, S.K., Ratra, R.K., 2000. Toxic effect of metal ions on biochemical oxygen demand. Water Resources 34 (1), 147e152. Muga, H.E., Mihelcic, J.R., 2008. Sustainability of wastewater treatment technologies. Journal of Environmental Management 88, 437e447. Neculita, C., Zagury, G.J., Bussie´re, B., 2007. Passive treatment of acid mine drainage in bioreactors using sulfate-reducing bacteria: critical review and research needs. Journal of Environmental Quality 36, 1e16. Nelson, M., Odum, H.T., Brown, M.T., Alling, A., 2001. “Living off the land”: resource efficiency of wetland wastewater treatment. Advances in Space Research 27 (9), 1547e1556. Niyogi, D.K., Lewis, W.M., McKnight, D.M., 2003. Direct and indirect effects of mine drainage on bacterial processes in mountain streams. Journal of the North American Benthological Society 22 (2), 276e291. Odum, H.T., 1996. Environmental Accounting: Emergy and Environmental Decision Making. John Wiley & Sons, Inc. Omoike, A.I., Vanloon, G.W., 1999. Removal of phosphorus and organic matter removal by alum during wastewater treatment. Water Research 33 (17), 3617e3627. Ouellette, J., 1996. Coagulants and flocculants rise. Chemical Marketing Reporter 250 (15), SR18. Parsons, S.A., Smith, J.A., 2008. Phosphorus removal and recovery from municipal wastewaters. Elements 4, 109e112. Pepper, I.L., Gerba, C.P., Brendecke, J.W., 1995. Environmental Microbiology: A Laboratory Manual. Academic Press. Pruden, A., Messner, N., Pereyra, L., Hanson, R.E., Hiibel, S.R., Reardon, K.F., 2007. The effect of inoculums on the performance of sulfate-reducing columns treating heavy metal contaminated water. Water Research 41, 904e914. Roetman, E.T., 1932. The Sterilization of Sewage by Acid Mine Water. Civil Engineering Masters thesis, West Virginia University.
Saliling, W.J.B., Westerman, P.W., Losordo, T.M., 2007. Wood chips and wheat straw as alternative biofilter media for denitrification reactors treating aquaculture and other wastewaters with high nitrate concentrations. Aquacultural Engineering 37, 222e233. Servais, P., Garnier, J., Demarteau, N., Brion, N., Billen, G., 1999. Supply of organic matter and bacteria to aquatic ecosystems through waste water effluents. Water Research 33 (16), 3521e3531. Sharp, J.H., Benner, R., Bennett, L., Carlson, C.A., Fitzwater, S.E., Peltzer, E.T., Tupas, L.M., 1995. Analyses of dissolved organic carbon in seawater: the JGOFS EqPac methods comparison. Marine Chemistry 48, 91e108. Strosnider, W.H., Nairn, R.W., 2010. Effective passive treatment of high-strength acid mine drainage and raw municipal wastewater in Potosı´, Bolivia using simple mutual incubations and limestone. Journal of Geochemical Exploration 105, 34e42. Strosnider, W.H., Winfrey, B.K., Nairn, R.W. Novel passive cotreatment of acid mine drainage and municipal wastewater. Journal of Environmental Quality, in press. Tandukar, M., Ohashi, A., Harada, H., 2007. Performance comparison of a pilot-scale UASB and DHS system and activated sludge process for the treatment of municipal wastewater. Water Research 41, 2697e2705. Winfrey, B.K., Strosnider, W.H., Nairn, R.W., Strevett, K.A., 2010. Highly effective reduction of fecal indicator bacteria counts in an ecologically-engineered municipal wastewater and acid mine drainage passive co-treatment system. Ecological Engineering 36, 1620e1626. Wei, X., Viadero, R.C., Bhojappa, S., 2008. Phosphorus removal by acid mine drainage sludge from secondary effluents of municipal wastewater treatment plants. Water Research 42, 3275e3284. Wolkersdorfer, C., Bowell, R. (Eds.), 2004a. Contemporary Reviews of Mine Water Studies in Europe, Parts 1. Mine Water and the Environment 23, 162e182. Wolkersdorfer, C., Bowell, R. (Eds.), 2004b. Contemporary Reviews of Mine Water Studies in Europe, Parts 2. Mine Water and the Environment 24, 2e37. Wolkersdorfer, C., Bowell, R. (Eds.), 2004c. Contemporary Reviews of Mine Water Studies in Europe, Parts 3. Mine Water and the Environment 24, 58e76. Woomer, P.L., 1994. In: Weaver, R.W., Angle, J.S., Bottomley, P.S. (Eds.), Methods of Soil Analysis Part 2 e Microbiological and Biochemical Properties. Soil Science Society of America, Inc., Madison, WI. Younger, P., Banwart, S.A., Hedin, R.S., 2002. Mine Water: Hydrology, Pollution, Remediation. Kluwer Academic Publishers, Boston.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 8 7 e1 0 9 4
Available at www.sciencedirect.com
journal homepage: www.elsevier.com/locate/watres
Efficiency of water disinfectants against Legionella pneumophila and Acanthamoeba Mathieu Dupuy a, Ste´phane Mazoua a, Florence Berne a, Charles Bodet a, Nathalie Garrec b, Pascaline Herbelin c, Florence Me´nard-Szczebara d, Sandrine Oberti d, Marie-He´le`ne Rodier a, Sylvie Soreau c, France Wallet e, Yann He´chard a,* a
Universite´ de Poitiers, Laboratoire de Chimie et Microbiologie de l’Eau, CNRS UMR 6008, 40 avenue du recteur Pineau, 86022 Poitiers Cedex, France b CAE, Veolia Environnement, 1 place de Turenne, 94410 Saint-Maurice Cedex, France c EDF, Division Recherche et De´veloppement, 6 Quai Watier, 78401 Chatou, France d Anjou Recherche, Veolia Environnement, Chemin de la digue BP76, 78603 Maisons Laffitte Cedex, France e EDF, Service des Etudes Me´dicales, 22-28 rue Joubert, 75009 Paris, France
article info
abstract
Article history:
Free-living amoebae might be pathogenic by themselves and be a reservoir for bacterial
Received 8 June 2010
pathogens, such as Legionella pneumophila. Not only could amoebae protect intra-cellular
Received in revised form
Legionella but Legionella grown within amoebae could undergo physiological modifications
18 October 2010
and become more resistant and more virulent. Therefore, it is important to study the
Accepted 19 October 2010
efficiency of treatments on amoebae and Legionella grown within these amoebae to
Available online 28 October 2010
improve their application and to limit their impact on the environment. With this aim, we compared various water disinfectants against trophozoites of three
Keywords:
Acanthamoeba strains and L. pneumophila alone or in co-culture. Three oxidizing disinfectants
Chlorine
(chlorine, monochloramine, and chorine dioxide) were assessed. All the samples were
Amoebae
treated with disinfectants for 1 h and the disinfectant concentration was followed to
Bacteria
calculate disinfectant exposure (Ct). We noticed that there were significant differences of
Oxidant
susceptibility among the Acanthamoeba strains. However no difference was observed
Biocide
between infected and non-infected amoebae. Also, the comparison between the three disinfectants indicates that monochloramine was efficient at the same level towards free or co-cultured L. pneumophila while chlorine and chlorine dioxide were less efficient on cocultured L. pneumophila. It suggests that these disinfectants should have different modes of action. Finally, our results provide for the first time disinfectant exposure values for Acanthamoeba treatments that might be used as references for disinfection of water systems. ª 2010 Elsevier Ltd. All rights reserved.
1.
Introduction
Legionella pneumophila is a waterborne pathogenic bacterium responsible for severe pneumonia called Legionnaires’ disease
(Fields et al., 2002; Steinert et al., 2002). L. pneumophila can be found at high levels in man-made water systems such as air conditioning, cooling towers and spas (Borella et al., 2005). These systems are mainly implicated in outbreaks as they
* Corresponding author. Tel.: þ33 5 49 45 40 07; fax: þ33 5 49 45 35 03. E-mail address:
[email protected] (Y. He´chard). 0043-1354/$ e see front matter ª 2010 Elsevier Ltd. All rights reserved. doi:10.1016/j.watres.2010.10.025
1088
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 8 7 e1 0 9 4
might produce infected water droplets, which are inhaled by people. In the environment, L. pneumophila is ubiquitously found in fresh water and could survive within biofilms and free-living amoebae (Borella et al., 2005; Taylor et al., 2009; Temmerman et al., 2006). Several protozoa, such as freeliving amoebae, feed on biofilms leading to L. pneumophila phagocytosis. However, L. pneumophila has the ability to resist phagocytosis and multiply within amoebae, via a well-known mechanism (Molmeret et al., 2004). A similar mechanism is used by these bacteria to resist phagocytosis by macrophages, leading to lung infection (Molmeret et al., 2004). Protozoa, such as amoebae, are proposed to provide an intra-cellular environment for L. pneumophila multiplication in water systems. It may also be expected that bacteria will multiply freely under specific conditions (Borella et al., 2005; Taylor et al., 2009). In the amoebae, intra-cellular Legionella are i) protected from adverse conditions or disinfectant treatments (Bichai et al., 2008; Thomas et al., 2004), ii) highly virulent as they adapt to intra-cellular life (Molmeret et al., 2005) and iii) less sensitive to disinfectants because of phenotypic modification (Garduno et al., 2002). Various disinfectants (e.g. chlorine, monochloramine, .) and physical treatments (e.g. heat, UV, .) are used in water systems to control Legionella growth (Kim et al., 2002). Several disinfection studies have been performed on Legionella (Campos et al., 2003; Kim et al., 2002). In case of treatment failure, L. pneumophila might be able to recolonize water systems. It has been hypothesized that this recolonization is made possible because Legionella is protected in the biofilm or in amoebae (Barker et al., 1992; Donlan et al., 2005; Murga et al., 2001). Few studies have examined the impact of these treatments on L. pneumophila grown in co-culture with amoebae (Garcia et al., 2007; Storey et al., 2004). In addition, only few studies have reported the impact of chlorine on Acanthamoeba (Critchley and Bentham, 2009; Cursons et al., 1980; Kuchta et al., 1993) but no Ct values were calculated and monochloramine was poorly studied. In our study, we compared the efficiency of three disinfectants, commonly used in water treatments, on three strains of Acanthamoeba and one strain of L. pneumophila alone or in co-culture.
2.
Materials and methods
2.1.
Amoebae isolation and culture
(ampicillin 200 mg/mL and streptomycin 200 mg/mL). All isolates adapted to growth in axenic medium were subcultured in the 1034 medium without antibiotic at 25 C.
2.2.
L. pneumophila Lens was kindly provided by the National Reference Center of Legionella, Lyon, France (Cazalet et al., 2004). The bacteria were grown on buffered charcoal yeast extract (BCYE) agar plates at 37 C for 4 days before co-culture experiments.
2.3.
Co-culture of L. pneumophila and Acanthamoeba
Axenic Acanthamoeba were grown at 25 C for 3 days in 25-cm2 tissue culture flasks (NUNC) containing 5 mL of 1034 medium. Adherent trophozoites were washed once with amoeba buffer (2.5 mM KH2PO4, 4 mM MgSO4, 0.5 mM CaCl2, 2.5 mM, Na2HPO4, 0.05 mM (NH4)2FeII(SO4)2) and suspended in this buffer. The cells were then pelleted by centrifugation (500g, 15 min) and resuspended at a concentration of 106 cells/mL in amoeba buffer supplemented with 10% 1034 medium. L. pneumophila Lens were harvested from BCYE plate and diluted in amoeba buffer at a concentration of 108 cells/mL. An aliquot of this sample was added to the trophozoites’ suspension to achieve a multiplicity of infection (MOI) of 0.1, leading to a final concentration of amoebae and L. pneumophila Lens of 105e106 cells/mL and 104e105 cells/mL, respectively. All the samples were incubated at 30 C for 24e48 h. Co-cultures contained both infected and non-infected trophozoites, as well as free L. pneumophila. The samples were centrifuged (500g, 15 min), washed twice in phosphate buffer (50 mM, pH 8) and adjusted to 106 amoebae/mL before disinfection treatments.
2.4.
Amoeba identification
DNA was extracted from amoeba cells using the NucleoSpin Tissue kit (Macherey Nagel). An 18S rDNA PCR was performed with primers Ami6F1 and Ami9R, as described previously (Thomas et al., 2006). The amplicons (w850 bp) were sequenced with each primer using the BigDye Terminator v3.1 cycle sequencing kit (Applied Biosystems) and analyzed using the 3130 Genetic Analyzer (Applied Biosystems).
2.5. With the aim to isolate environmental strains, water samples from different sources were collected by Anjou Recherche (Maisons-Laffitte, France) and Electricite´ De France (EDF Chatou, France). A drop of water was placed onto a nonnutrient agar plate (made only with water and agar 15 g/L) seeded with a lawn of Escherichia coli XL1 Blue (Stratagene). This medium is referred to as NNA-Eco. Plates were incubated at various temperatures and examined daily for 7e14 days. After amoebae growth (indicated by zone of lysis), an isolate was transferred onto a fresh NNA-Eco plate. The amoebae grown on NNA-Eco were then transferred to axenic broth 1034 medium (peptone 10 g/L, yeast extract 10 g/L, ribonucleic acid 1 g/L, folic acid 115 mg/L, hemin 1 mg/L, KH2PO4 0.36 g/L, Na2HPO4 0.5 g/L, pH 6.5) containing antibiotics
L. pneumophila culture
Disinfection treatments
Three different disinfectants, commonly used by industries to disinfect their networks and circuits, were used: chlorine at 30 C (used in cooling towers) or at 50 C (used in hot water systems), chlorine dioxide and monochloramine. The initial concentrations were as follows: chlorine between 2 and 3 mg Cl2/L (to provide approximately 1 mg Cl2/L residual after 1 h), chlorine dioxide 0.4 mg/L and monochloramine 0.8 mg Cl2/L. All the solutions were prepared from reagentgrade chemicals and deionized water. Stock solutions were stored at 4 C. All the glassware was cleaned with chlorine (100 mg/L) for at least 1 h and carefully rinsed with deionized water. Chlorine solution was freshly prepared by dilution of sodium hypochlorite (13%, ACROS Organics). Chlorine
1089
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 8 7 e1 0 9 4
concentration was measured by the 4500-Cl G DPD method (APHA, 2005) before and during treatments in order to determine the residual concentration. Stock solution of monochloramine was obtained by adding free chlorine in a solution of ammonium chloride under agitation, with a chlorine to nitrogen molar ratio of 0.5 and at a pH of 8.5. The final concentration of the stock solution of monochloramine was 2 mM (or about 140 mg Cl2/L). A stock solution of chlorine dioxide was prepared by slowly adding sulfuric acid to a sodium chlorite solution and then by collecting the gaseous chlorine dioxide produced in ultrapure water according to the 4500-ClO2 B method (APHA, 2005). The concentration of the stock solution was about 400 mg/L. The DPD method was also used to measure the residual concentration of monochloramine and chlorine dioxide. Treatment with chlorine, monochloramine and chlorine dioxide was stopped by addition of 10 mL of sterile sodium thiosulfate (0.1 M). Before each treatment, 1 mL of microbial cells’ suspension was transferred into 100 mL of sterile phosphate buffer (50 mM, pH 8), leading to a concentration of 104 amoebae/mL and 104e105 L. pneumophila/mL. The sample was incubated at 30 C (and 50 C for chlorine only) under agitation and disinfectant (between 0.1 and 0.5 mL at room temperature) was added. The concentration of disinfectant (Supplementary figures) and the survival of Acanthamoeba and L. pneumophila were followed after 0, 2, 15, 30 and 60 min of treatment. For each experiment, a disinfectant consumption test without microorganism was conducted in 100 mL of phosphate buffer under the same conditions of temperature in order to evaluate the stability of the biocide. The disinfectant exposure was quantified by Ct (concentration time, in mg min/L), which corresponds to the geometric area under the disinfectant decay curve. Microbial inactivation (loss of cultivability) was recorded as a function of Ct, to evaluate the effectiveness of the disinfectants. Ct tables have been developed for some waterborne pathogens to indicate conditions necessary for a 2-log (Ct99%) or 3-log (Ct99.9%) inactivation (King et al., 1988; Rose et al., 2005). We have considered that treatments were efficient when a 3-log reduction was reached, as this value is mainly used in the literature.
2.6.
3.
Results
3.1. Isolation and identification of Acanthamoeba strains Water samples from cooling towers were used to isolate amoebae on plates. Among the primary isolates, several amoebae, whose morphology was similar to that of Acanthamoeba strains, were selected. Three of these strains were axenized in the 1034 medium. In order to confirm the genus of these amoebae at the molecular level, their 18S rDNA was sequenced. The comparison of these sequences to data banks (BLAST nr) unambiguously confirmed that they belong to the Acanthamoeba genus. Moreover, these strains were different from each other since their sequences displayed differences. These sequences were deposited at GenBank (GU936482, GU936483, GU936484). The strains were named Acanthamoeba V1, S2 and M3 respectively.
3.2.
Acanthamoeba infection by L. pneumophila
The ability of L. pneumophila to infect each amoeba strain was tested. Amoebae (105 cells/mL) were mixed with L. pneumophila (104 cells/mL) to have a MOI of 0.1. The growth of L. pneumophila was followed by CFU measurement each day. In co-culture with Acanthamoeba V1 or Acanthamoeba M3, L. pneumophila grew rapidly and at the same rate than in ATCC collection strains (Fig. 1). The population was amplified by more than 2 log within 48 h. Legionella grew slower, ending to 2-log amplification in 72 h with Acanthamoeba S2. These results show that Legionella was able to infect all these strains, although the infection rate might be different between the Acanthamoeba strains.
Chlorine treatment at 30 C and 50 C
3.3.
The aim of this study was to compare disinfection treatments against L. pneumophila and Acanthamoeba, either alone or in
Acanthamoeba V1 A. castellanii ATCC 30254
Survival of Acanthamoeba and L. pneumophila
10 8
A. castellanii ATCC 50739 Acanthamoeba S2
10
CFU/mL
The survival of Acanthamoeba and L. pneumophila was determined by the most probable number (MPN) procedure (Beattie et al., 2003). For L. pneumophila counts, co-cultures were centrifuged (14,000g, 5 min) and vortexed for 1 min to release intra-trophozoite bacteria, as previously described (Wintermeyer et al., 1995). Then, 1, 0.1, 0.01 and 0.001 mL of each sample was inoculated onto NNA-Eco plates for amoebae or onto BCYE plates for L. pneumophila. Each inoculation was done in quintuplicates. Plates were incubated for 15 days at 25 C for amoeba or 7 days at 37 C for L. pneumophila. Each plate was examined for the absence or presence of microbial growth and the results were reported using an MPN table (Beattie et al., 2003). The limits of detection were 1.8 102 NPP/ L and 1.6 106 NPP/L, leading to a maximum amplitude of 3.94 log.
Acanthamoeba M3
7
10 6 10 5 10 4 10 3 0
24
48
72
Time (h) Fig. 1 e L. pneumophila growth in co-culture with various Acanthamoeba strains.
1090
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 8 7 e1 0 9 4
-2
-3
-4 0
20
40
60
80
100
Ct (mg.min/L)
B
0
-1
0
-1
log (N/N0)
0
-1
log (N/N0)
A
A
log (N/N0)
co-culture. The first step was to assess chlorine efficiency on these microorganisms at 30 C and 50 C. Cultures or cocultures were treated with an initial chlorine concentration (between 2 and 3 Cl2/L) chosen to have a residual free chlorine concentration of approximately 1 mg Cl2/L at the end of the treatment. The consumption of biocides during the experiments was followed in order to calculate the Ct and is presented in Figs. S1 and S2 (Supplementary information). The consumption of chlorine was lower with Legionella than with Acanthamoeba (Fig. S2). The results with Acanthamoeba trophozoites show that chlorine was efficient to inactivate, by 3 log at least, all the strains (Fig. 2). The efficiency seems to be slightly higher at 50 C than at 30 C (Fig. 2). Inactivation values for Acanthamoeba are compared in Fig. 6. Statistical analyses (performed using unpaired two-tailed Student’s t-test) show that, for a given Ct, there were significant differences of sensitivity between strains and that Acanthamoeba M3 was the more sensitive strain
-2
-2
-3
-3
-4 0
20
40
60
80
100
Ct (mg.min/L) -4 0
20
40
60
80
100
Ct (mg.min/L)
B
0
log (N/N0)
-1
-2
-3
-4 0
20
40
60
80
100
Ct (mg.min/L) Fig. 2 e Reduction of Acanthamoeba trophozoites cultivability after chlorine treatment at 30 C (A) or 50 C (B). Acanthamoeba V1 infected (B) or not (C) with L. pneumophila, Acanthamoeba S2 infected (,) or not (-) with L. pneumophila, Acanthamoeba M3 infected (6) or not (:) with L. pneumophila was treated with the disinfectant for 60 min and the survival was counted by the MPN method. Bars represent standard errors of the means of three independent experiments.
Fig. 3 e Reduction of L. pneumophila cultivability after chlorine treatment at 30 C (A) or 50 C (B). L. pneumophila alone (A) or in co-culture with Acanthamoeba V1 (B), Acanthamoeba S2 (,), or Acanthamoeba M3 (6) was treated with the disinfectant for 60 min and the survival was counted by the MPN method. Bars represent standard errors of the means of three independent experiments.
(Fig. 6A and B). Besides, there was no significant difference (P > 0.005) of sensitivity between infected or non-infected Acanthamoeba. Chlorine treatment was also highly efficient on Legionella and treatment at 50 C seems to be even more efficient (Fig. 3). Inactivation values for Legionella are compared in Fig. 7. The comparison of inactivation at 30 C clearly shows that cocultured L. pneumophila were significantly less sensitive (P < 0.005 or P < 0.001) than free L. pneumophila (Fig. 7A). This was not seen at 50 C (Fig. 7B) because the detection threshold was rapidly reached. Also, there was no difference (P > 0.005) between L. pneumophila co-cultivated with the different amoebae strains.
3.4.
Monochloramine and chlorine dioxide treatment
Monochloramine (NH2Cl, 0.8 mg Cl2/L initial concentration) and chlorine dioxide (ClO2, 0.4 mg/L initial concentration)
1091
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 8 7 e1 0 9 4
-2
-3
-4 0
10
20
30
40
50
6
8
10
Ct (mg.min/L)
B
0
-1
0
-1
log (N/N0)
0
-1
log (N/N0)
A
A
log (N/N0)
were used for amoeba and L. pneumophila treatment. The consumption of biocides during the experiments was followed in order to calculate the Ct and is presented in Figs. S3 and S4 (Supplementary information). Monochloramine concentration was more stable than those of chlorine or chlorine dioxide. Chlorine dioxide was highly efficient on Acanthamoeba M3 only (Figs. 4B and 6C). Chlorine dioxide displayed an inactivation pattern similar to that of chlorine. Monochloramine was highly efficient on Acanthamoeba M3 and V1 but Acanthamoeba S2 was significantly less sensitive (Figs. 4A and 6D). As for chlorine, there was no significant difference (P > 0.005 using unpaired two-tailed Student’s t-test) of sensitivity between infected and non-infected amoebae towards these two disinfectants (Fig. 6). The results with L. pneumophila show that monochloramine and chlorine dioxide were efficient (Fig. 5). With chlorine
-2
-3
-2
-4
-3
0
2
4
Ct (mg.min/L) -4 0
10
20
30
40
50
Ct (mg.min/L)
B
0
Fig. 5 e Reduction of L. pneumophila cultivability after monochloramine (A) or chlorine dioxide (B) treatments. L. pneumophila alone (A) or in co-culture with Acanthamoeba V1 (B), Acanthamoeba S2 (,), or Acanthamoeba M3 (6) was treated with the disinfectant for 60 min and the survival was counted by the MPN method. Bars represent standards errors of the means of three independent experiments.
lo g ( N / N 0)
-1
-3
dioxide, co-cultured bacteria were less sensitive (P < 0.001) than free bacteria (Fig. 7C). On the contrary, there was no significant difference (P > 0.005) between free and co-cultured bacteria treated with monochloramine (Fig. 7D).
-4
4.
-2
0
2
4
6
8
Discussion
10
Ct (mg.min/L) Fig. 4 e Reduction of Acanthamoeba trophozoites cultivability after monochloramine (A) or chlorine dioxide (B) treatments. Acanthamoeba V1 infected (B) or not (C) with L. pneumophila, Acanthamoeba S2 infected (,) or not (-) with L. pneumophila, Acanthamoeba M3 infected (6) or not (:) with L. pneumophila was treated with the disinfectant for 60 min and the survival was counted by the MPN method. Bars represent standard errors of the means of three independent experiments.
In order to improve the efficiency of water treatment, we compared three disinfectants in controlled conditions. The treatment doses were chosen to be realistic and representative of actual practices. The results allow estimating both efficiency of the disinfectants and sensitivity of three Acanthamoeba strains and L. pneumophila alone or in co-culture. No study had compared the sensitivity of Acanthamoeba towards these three common disinfectants. Also, for water treatment, it is important to define Ct values to inactivate a given microorganism. We thus decided to calculate these Ct values and represent them in the function of inactivation.
1092
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 8 7 e1 0 9 4
0
B
-3
cc
A ca
V1
S2
cc
cc 3
cc V1
cc A ca
3 M
S2 A ca
M A ca
V1 A
ca A
ca
S2
cc 3 M
ca A
A
ca
V1
S2 A
ca
M ca
3
-5 cc
-5 cc
-4
cc
-3
-4
A
*
V1
** **
** **
-3
**
-2
S2
-2
log (N/N0)
-1
3
log (N/N0)
-1
0
A ca
D
A ca
0
A ca
A ca
V1
M
3
cc
cc ca A
A
A
ca
ca
M
S2
3
V1
S2 A
A
ca
ca
M ca A
C
M
-5
*
V1
-5
*
A ca
-4
cc
-4
S2
** *
A ca
*
-3
-2
A ca
-2
log (N/N0)
-1
3
log (N/N0)
-1
0
A ca
A
Fig. 6 e Comparison of Acanthamoeba inactivation after treatments. (A) Chlorine at 30 C, Ct [ 5 mg min/L, (B) chlorine at 50 C, Ct [ 5 mg min/L, (C) chlorine dioxide at 30 C, Ct [ 5 mg min/L, and (D) monochloramine at 30 C, Ct [ 2 mg min/L. Acanthamoeba M3, S2 and V1 were grown alone or in co-culture (cc). Values are the average calculated from three independent experiments ± standard deviation. Statistical analyses were performed by unpaired two-tailed Student’s t-test (*P < 0.005; **P < 0.001).
Regarding Acanthamoeba, we show that the efficiency of the treatments clearly depends on the target strain. Similar results have been reported recently with other treatments (Coulon et al., 2010). Acanthamoeba M3 was the most sensitive strain to chlorine and chlorine dioxide but not to monochloramine. Chlorine and chlorine dioxide displayed a different inactivation pattern than monochloramine; it could be hypothesized that monochloramine should have a different mode of action as compared to the two other disinfectants. It was previously reported that L. pneumophilainfected Acanthamoeba polyphaga exhibited higher resistance to chlorine than uninfected amoeba (Garcia et al., 2007). In contrast, no significant differences of sensitivity between infected or non-infected amoebae were observed for all treatments in this study. This suggests that protection of amoeba against disinfectant conferred by L. pneumophila may be limited to specific conditions. Regarding L. pneumophila, almost all the treatments were efficient, i.e. leading to at least a 3-log reduction of the bacterial population in our conditions. However their efficiency, estimated by the log of inactivation (Figs. 6 and 7), could be different. These results are in agreement with many studies on Legionella sensitivity to oxidizing disinfectants (Kim et al., 2002). Besides temperature seems to influence the disinfectant efficiency. Indeed, chlorine was more efficient at 50 C than at 30 C, at least on co-cultured
Legionella. Similarly, chlorine was shown to be more efficient at 43 C than at 25 C on these bacteria, although chlorine decay was faster at the higher temperature (Muraca et al., 1987). Our results clearly indicate that chlorine and chlorine dioxide were more efficient on free L. pneumophila as compared to co-cultured L. pneumophila. The difference between free and co-cultured bacteria is in agreement with the study of Garcia et al. (2007), which reported a higher resistance to chlorine of L. pneumophila when internalized within A. polyphaga. Also, Barker et al. have reported that L. pneumophila grown in Acanthamoeba were less sensitive than free bacteria to disinfectants (polyhexamethylene biguanide, benzisothiazolone and 5-chloro-N-methylisothiazolone) and antibiotics (Barker et al., 1992, 1995). It was proposed that L. pneumophila grown within amoebae were less sensitive because these bacteria undergo phenotypic modifications upon intra-cellular growth. Interestingly, monochloramine displays a different behavior, as compared to the other treatments. Indeed, there was no difference of efficiency against the intra-cellular and free L. pneumophila with monochloramine, while other treatments were more efficient on free L. pneumophila. This behavior has not been reported before. It suggests that monochloramine has a different mode of action as compared to chlorine and chlorine dioxide.
1093
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 8 7 e1 0 9 4
-1
-1
V1
0 -1
-2 -3
**
-4
**
**
log (N/N0)
-2 -3 -4
V1
S2 Lp n
cc
A ca
A ca cc
cc
Lp n
Lp n
cc
A ca
A ca
V1
S2 A ca cc
Lp n
cc
A ca
M
3
Lp n Lp n
Lp n
-5
-5
Lp n
log (N/N0)
cc
A ca cc Lp n
D
A ca
V1
Lp n
Lp n
cc
cc
A ca
A ca
M 3 A ca cc
Lp n
0
cc
-5
Lp n
-5
Lp n
-4
S2
-4
S2
-3
A ca
*
M 3
**
-2
Lp n
**
-3
log (N/N0)
-2
Lp n
log (N/N0)
-1
C
0
B
0
M 3
A
Fig. 7 e Comparison of L. pneumophila inactivation after treatments. (A) Chlorine at 30 C, Ct [ 5 mg min/L, (B) chlorine at 50 C, Ct [ 3 mg min/L, (C) chlorine dioxide at 30 C, Ct [ 0.6 mg min/L, and (D) monochloramine at 30 C, Ct [ 2 mg min/L. L. pneumophila were grown alone or in co-culture (cc) with Acanthamoeba M3, S2 or V1. Values are the average calculated from three independent experiments ± standard deviation. Statistical analyses were performed by unpaired two-tailed Student’s t-test (*P < 0.005; **P < 0.001).
5.
Conclusion
Our work has compared for the first time the efficiency of chlorine, chlorine dioxide and monochloramine on Acanthamoeba and L. pneumophila. All these disinfectants, at concentrations similar to those used in water systems were efficient in the conditions set up in this study. However, their efficiency may vary with the Acanthamoeba strain. Interestingly, chlorine and chlorine dioxide were less efficient when L. pneumophila was co-cultivated with Acanthamoeba while monochloramine did not display the same selectivity. The inactivation pattern of Acanthamoeba by monochloramine was also different from the two other disinfectants. It suggests that monochloramine would have a different mode of action. This hypothesis will be tested in further experiments with Acanthamoeba. With the dual purpose of protection of health and environment, our results might help to adapt treatment strategies against amoebae and L. pneumophila.
Acknowledgment We are grateful to Pierre Pernin (University of Lyon, France), who was involved in amoebae isolation and morphological
characterization. C.B. was supported by a grant from the CNRS.
Appendix. Supplementary data Supplementary data related to this article can be found, in the online version, at doi:10.1016/j.watres.2010.10.025.
references
APHA, 2005. Standard Methods for the Examination of Water and Wastewater, twenty first ed. Washington, DC, USA. Barker, J., Brown, M.R., Collier, P.J., Farrell, I., Gilbert, P., 1992. Relationship between Legionella pneumophila and Acanthamoeba polyphaga: physiological status and susceptibility to chemical inactivation. Applied and Environmental Microbiology 58 (8), 2420e2425. Barker, J., Scaife, H., Brown, M.R., 1995. Intraphagocytic growth induces an antibiotic-resistant phenotype of Legionella pneumophila. Antimicrobial Agents and Chemotherapy 39 (12), 2684e2688. Beattie, T.K., Seal, D.V., Tomlinson, A., McFadyen, A.K., Grimason, A.M., 2003. Determination of amoebicidal activities of multipurpose contact lens solutions by using a most
1094
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 8 7 e1 0 9 4
probable number enumeration technique. Journal of Clinical Microbiology 41 (7), 2992e3000. Bichai, F., Payment, P., Barbeau, B., 2008. Protection of waterborne pathogens by higher organisms in drinking water: a review. Canadian Journal of Microbiology 54 (7), 509e524. Borella, P., Guerrieri, E., Marchesi, I., Bondi, M., Messi, P., 2005. Water ecology of Legionella and protozoan: environmental and public health perspectives. Biotechnology Annual Review 11, 355e380. Campos, C., Loret, J.F., Cooper, A.J., Kelly, R.F., 2003. Disinfection of domestic water systems for Legionella pneumophila. Journal of Water Supply: Research and Technology e AQUA 52, 341e354. Cazalet, C., Rusniok, C., Bruggemann, H., Zidane, N., Magnier, A., Ma, L., Tichit, M., Jarraud, S., Bouchier, C., Vandenesch, F., Kunst, F., Etienne, J., Glaser, P., Buchrieser, C., 2004. Evidence in the Legionella pneumophila genome for exploitation of host cell functions and high genome plasticity. Nature Genetics 36 (11), 1165e1173. Coulon, C., Collignon, A., McDonnell, G., Thomas, V., 2010. Resistance of Acanthamoeba cysts to disinfection treatments used in health care settings. Journal of Clinical Microbiology 48 (8), 2689e2697. Critchley, M., Bentham, R., 2009. The efficacy of biocides and other chemical additives in cooling water systems in the control of amoebae. Journal of Applied Microbiology 106 (3), 784e789. Cursons, R.T., Brown, T.J., Keys, E.A., 1980. Effect of disinfectants on pathogenic free-living amoebae: in axenic conditions. Applied and Environmental Microbiology 40 (1), 62e66. Donlan, R.M., Forster, T., Murga, R., Brown, E., Lucas, C., Carpenter, J., Fields, B., 2005. Legionella pneumophila associated with the protozoan Hartmannella vermiformis in a model multispecies biofilm has reduced susceptibility to disinfectants. Biofouling 21 (1), 1e7. Fields, B.S., Benson, R.F., Besser, R.E., 2002. Legionella and Legionnaires’ disease: 25 years of investigation. Clinical Microbiology Reviews 15 (3), 506e526. Garcia, M.T., Jones, S., Pelaz, C., Millar, R.D., Abu Kwaik, Y., 2007. Acanthamoeba polyphaga resuscitates viable non-culturable Legionella pneumophila after disinfection. Environmental Microbiology 9 (5), 1267e1277. Garduno, R.A., Garduno, E., Hiltz, M., Hoffman, P.S., 2002. Intracellular growth of Legionella pneumophila gives rise to a differentiated form dissimilar to stationary-phase forms. Infection and Immunity 70 (11), 6273e6283. Kim, B.R., Anderson, J.E., Mueller, S.A., Gaines, W.A., Kendall, A.M., 2002. Literature review e efficacy of various disinfectants against Legionella in water systems. Water Research 36 (18), 4433e4444. King, C.H., Shotts Jr., E.B., Wooley, R.E., Porter, K.G., 1988. Survival of coliforms and bacterial pathogens within protozoa during
chlorination. Applied and Environmental Microbiology 54 (12), 3023e3033. Kuchta, J.M., Navratil, J.S., Shepherd, M.E., Wadowsky, R.M., Dowling, J.N., States, S.J., Yee, R.B., 1993. Impact of chlorine and heat on the survival of Hartmannella vermiformis and subsequent growth of Legionella pneumophila. Applied and Environmental Microbiology 59 (12), 4096e4100. Molmeret, M., Bitar, D.M., Han, L., Kwaik, Y.A., 2004. Cell biology of the intracellular infection by Legionella pneumophila. Microbes Infection 6 (1), 129e139. Molmeret, M., Horn, M., Wagner, M., Santic, M., Abu Kwaik, Y., 2005. Amoebae as training grounds for intracellular bacterial pathogens. Applied and Environmental Microbiology 71 (1), 20e28. Muraca, P., Stout, J.E., Yu, V.L., 1987. Comparative assessment of chlorine, heat, ozone, and UV light for killing Legionella pneumophila within a model plumbing system. Applied and Environmental Microbiology 53 (2), 447e453. Murga, R., Forster, T.S., Brown, E., Pruckler, J.M., Fields, B.S., Donlan, R.M., 2001. Role of biofilms in the survival of Legionella pneumophila in a model potable-water system. Microbiology 147, 3121e3126. Rose, L.J., Rice, E.W., Jensen, B., Murga, R., Peterson, A., Donlan, R.M., Arduino, M.J., 2005. Chlorine inactivation of bacterial bioterrorism agents. Applied and Environmental Microbiology 71 (1), 566e568. Steinert, M., Hentschel, U., Hacker, J., 2002. Legionella pneumophila: an aquatic microbe goes astray. FEMS Microbiology Reviews 26 (2), 149e162. Storey, M.V., Winiecka-Krusnell, J., Ashbolt, N.J., Stenstrom, T.A., 2004. The efficacy of heat and chlorine treatment against thermotolerant Acanthamoebae and Legionellae. Scand Journal of Infectious Diseases 36 (9), 656e662. Taylor, M., Ross, K., Bentham, R., 2009. Legionella, protozoa, and biofilms: interactions within complex microbial systems. Microbial Ecology 58 (3), 538e547. Temmerman, R., Vervaeren, H., Noseda, B., Boon, N., Verstraete, W., 2006. Necrotrophic growth of Legionella pneumophila. Applied and Environmental Microbiology 72 (6), 4323e4328. Thomas, V., Bouchez, T., Nicolas, V., Robert, S., Loret, J.F., Levi, Y., 2004. Amoebae in domestic water systems: resistance to disinfection treatments and implication in Legionella persistence. Journal of Applied Microbiology 97 (5), 950e963. Thomas, V., Herrera-Rimann, K., Blanc, D.S., Greub, G., 2006. Biodiversity of amoebae and amoeba-resisting bacteria in a hospital water network. Applied and Environmental Microbiology 72 (4), 2428e2438. Wintermeyer, E., Ludwig, B., Steinert, M., Schmidt, B., Fischer, G., Hacker, J., 1995. Influence of site specifically altered Mip proteins on intracellular survival of Legionella pneumophila in eukaryotic cells. Infection and Immunity 63 (12), 4576e4583.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 9 5 e1 1 0 4
Available at www.sciencedirect.com
journal homepage: www.elsevier.com/locate/watres
Direct photodegradation of carbamazepine followed by micellar electrokinetic chromatography and mass spectrometry Vaˆnia Calisto a, M. Rosa´rio M. Domingues b, Guillaume L. Erny a, Valdemar I. Esteves a,* a
Department of Chemistry and CESAM (Centre for Environmental and Marine Studies), University of Aveiro, Campus de Santiago, 3810-193 Aveiro, Portugal b Department of Chemistry, Mass Spectrometry Centre, University of Aveiro, Campus de Santiago, 3810-193 Aveiro, Portugal
article info
abstract
Article history:
Carbamazepine, a widely consumed psychotropic pharmaceutical, is one of the most
Received 2 July 2010
commonly detected drugs in the environment. To better assess the environmental persis-
Received in revised form
tence of carbamazepine in aqueous matrices, the effect of pH and dissolved oxygen on the
6 September 2010
direct photodegradation rate of this pharmaceutical was evaluated in this study, using
Accepted 30 October 2010
simulated solar irradiation. In order to follow the degradation and the emergence of photo-
Available online 5 November 2010
products, a micellar electrokinetic chromatography based method was developed, consisting on the use of a dynamically coated capillary column. The developed methodology showed
Keywords:
good repeatability and efficiency in the separation of carbamazepine and photoirradiation
Pharmaceuticals
products. Also, seven photodegradation products were identified by electrospray mass
Environment
spectrometry (ESI-MS), including the known carcinogenic acridine that was produced under
Persistence
all the pH and oxygenation levels studied and one newly identified photoproduct.
Capillary electrophoresis
This paper gives new insights into the role of dissolved oxygen on the photodegradation
Quantum yield
rate of carbamazepine. The results indicate that acidic pH, combined with the absence of
Oxygen
dissolved oxygen in the aqueous matrix, results in very high direct photodegradation rates. At basic pH, dissolved oxygen does not interfere with the process and very low rates were observed. At environmentally relevant conditions, carbamazepine was shown to persist in the environment from 4.5 to 25 days. ª 2010 Elsevier Ltd. All rights reserved.
1.
Introduction
The study of the environmental impact of pharmaceuticals has been considered one of the most relevant growing fields of research (Halling-Sorensen et al., 1998; Petrovic and Barcelo´, 2007; Glassmeyer et al., 2008; Calisto and Esteves, 2009). The emergence of this concern, especially in the last decade, is justified by the large number of published studies reporting the widespread occurrence of these compounds (Glassmeyer et al., 2008), their persistence in ecosystems as well as their
ability to interfere with non-target organism at extremely low concentrations (Brooks et al., 2003a, 2003b; Brain et al., 2004; Johnson et al., 2005; Gust et al., 2009). Carbamazepine (CBZ) is an anti-epileptic drug frequently used in the treatment of seizures (Brunton et al., 2008). It is estimated that 1014 tons per year of carbamazepine are consumed worldwide (Zhang et al., 2008). Among the large number of pharmacologically active compounds, this drug should be made object of special attention as it is one of the most frequently detected pharmaceuticals in environmental
* Corresponding author. Tel.: þ351 234401408. E-mail address:
[email protected] (V.I. Esteves). 0043-1354/$ e see front matter ª 2010 Elsevier Ltd. All rights reserved. doi:10.1016/j.watres.2010.10.037
1096
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 9 5 e1 1 0 4
matrices (Petrovic and Barcelo´, 2007; Zhang et al., 2008). It has been found in surface (Ternes, 1998; Metcalfe et al., 2003; Miao and Metcalfe, 2003; Tixier et al., 2003; Hummel et al., 2006; Madureira et al., 2009) and ground waters (Focazio et al., 2008), waste water treatment plants (WWTP) influents and effluents (Ternes, 1998; Andreozzi et al., 2003; Miao and Metcalfe, 2003; Bendz et al., 2005; Hummel et al., 2006; Bahlmann et al., 2009) and even in drinking water (Heberer et al., 2002). These occurrences are a consequence of the already reported inadequacy of the treatment methods applied in the WWTPs. Several studies showed that the removal efficiency in WWTP is typically below 10% (Zhang et al., 2008). Moreover, the carbamazepine concentration found in WWTP effluents is frequently higher than that found in the influents. This fact may result from a phenomenon of deconjugation of the carbamazepine conjugated forms generated during metabolisation, contributing to the increase of the environmental concentration of this drug (Ternes, 1998; Clara et al., 2004; Bendz et al., 2005; Joss et al., 2005). Apart from the large number of occurrences in aquatic environments, this compound constitutes an additional source of concern as it has been shown that carbamazepine is highly resistant to biodegradation (Andreozzi et al., 2002, 2003; Tixier et al., 2003; Lam and Mabury, 2005). Also, as its solidwater distribution coefficient is extremely low, carbamazepine is expected to be present in the water phase in significant amounts (Ternes et al., 2004). Taking into account its preference to remain in the aqueous phase, direct or indirect photochemical degradation could be the most relevant processes that will determine the persistence of this kind of compound in surface waters, particularly exposed to sunlight (Boreen et al., 2003; Arnold and McNeill, 2007). However, reported studies indicate that carbamazepine is considerably resistant to photodegradation when compared with other pharmaceuticals (Andreozzi et al., 2003; Lam and Mabury, 2005). Moreover, some of the photodegradation products already identified in literature are known to produce more adverse effects than carbamazepine itself. This is the case of acridine, one of the most frequently identified photoproducts, that is considered a mutagenic and carcinogenic compound (Chiron et al., 2006; Kosjek et al., 2009). This manuscript aims to give new insights into the understanding of direct photodegradation of carbamazepine in water. Given that very limited data is available about the effect of the pH and dissolved oxygen on the behavior of this contaminant (environmental half-life and photoproducts produced), we hereby present some work that intends to better clarify this issue. A new micellar electrokinetic chromatography (MEKC) based method (developed to follow the photodegradation of carbamazepine and the emergence of photodegradation products) is also presented.
SigmaeAldrich), sodium chloride, ethylvanillin (99%, Aldrich), sodium tetraborate (Riedel-de Hae¨n), sodium hydroxide (Fluka), sulfuric acid (Fluka, 95e97%) and acetonitrile (HPLC gradient grade, VWR, Prolabo). Ultra-pure water, used in the preparation of standard solutions, running buffer and irradiation samples, was obtained using a Milli-Q Millipore system (Milli-Q plus 185).
2.2.
Irradiation experiments
2.2.1.
Irradiation Apparatus
The irradiation experiments were performed with the Solarbox 1500 (Co.fo.me.gra, Italy) equipped with a 1500 W arc xenon lamp and special outdoor UV filters that restrict the transmission of light with wavelengths below 290 nm. The uniformity of the irradiation was provided by a parabolic reflection chamber, whereas the temperature of the irradiation chamber was maintained by an air cooled system. During the irradiation, the irradiance was kept constant at 55 W m2 (290e400 nm); a multimeter (Co.fo.me.gra, Italy) equipped with a black standard temperature sensor and a UV 290e400 nm large band sensor was used to monitor the irradiance levels and temperature. Carbamazepine stock solutions were irradiated in triplicate using 25 mL quartz tubes with a diameter of 1.5 cm. Each set of experiments was accompanied by dark controls inside the irradiation chamber, also in triplicate, foiled several times with aluminum paper. The quartz tubes were suspended inside the chamber using a home-made metallic holder which guaranteed that samples were homogeneously irradiated.
2.2.2.
2.2.3.
Materials and methods
2.1.
Chemicals
All chemicals used were of analytical grade: carbamazepine (99%, Sigma), sodium dodecyl sulphate (99%, for electrophoresis, SigmaeAldrich), hexadimethrine bromide (polybrene,
Study of the effect of pH and dissolved oxygen
To study the photodegradation behavior of carbamazepine under different conditions, experiments were conducted at four different pH: 2.9, 4.0, 5.8 and 9.0. The pH of the stock solutions was adjusted using 1 M sodium hydroxide or formic acid prior to irradiation. Also, the effect of the dissolved oxygen in water was evaluated. Accordingly, each experiment was repeated after sparging the solutions with nitrogen or oxygen in order to remove or saturate the solutions with oxygen, respectively. The samples were sparged with the referred gases during approximately 1 min per mL of solution. During the sampling procedure, the quartz tubes were kept under oxygen or nitrogen atmosphere depending on the sample under study.
2.3.
2.
Sampling
Irradiation experiments were carried out up to 24 h. Sampling consisted on the collection of 2 mL aliquots of all the irradiated samples at specific time intervals. The aliquots were stored at 4 C and analyzed by MEKC within the next 3 days.
Capillary electrophoresis
To follow the degradation of carbamazepine and the appearance of its photodegradation products, a micellar electrokinetic chromatography (MEKC) based methodology was developed. The Capillary Electrophoresis (CE) analyses were performed using a commercial instrument (Beckman P/ACE MDQ (Fullerton, CA, USA)), equipped with a photodiode array
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 9 5 e1 1 0 4
UVevis detection system. Approximately 1 mm of the capillary external coating was removed by burning the extremities prior to conditioning; the capillary extremities were then polished to increase the efficiency of the method and decrease of baseline noise.
2.3.1.
Capillary column conditioning and coating
A fused-silica capillary with a total length of 50 cm (40 cm to detector) and 75 mm of internal diameter was used. The new capillaries were first conditioned with 1 M NaOH for 30 min followed by ultra-pure water for 15 min. Subsequently, to proceed to the capillary coating, it was flushed with hexadimethrine bromide (polybrene) 0.5% (w/v) in 0.5 M NaCl for 20 min, as described in Pranaityte´ and Padarauskas (2006). Then, the capillary was washed with ultra-pure water for 2 min, followed by a 20 min flushing with running buffer. The capillary was washed with running buffer for 20 min at the beginning of each working day and with ultra-pure water for 5 min at the end of the day. When not in use the capillary extremities were left immersed in ultra-pure water to ensure the stability of the capillary coating. All the capillary conditioning and coating steps were performed at a pressure of 20 psi.
2.3.2.
Standard solutions and running buffer
Carbamazepine stock solutions were prepared with ultra-pure water with a final concentration of 9.5 mg L1 (approximately half of its solubility in water) and were stored in dark glass bottles at 4 C, for no more than 1 month. A stock solution of ethylvanillin was used as internal standard (IS). This solution was prepared by dissolving ethylvanillin in acetonitrile (approximately 10% of the total volume) and further diluting it with ultra-pure water to a final concentration of 167 mg L1. The solution was stored at 4 C under N2 atmosphere. For the CE calibration curve, six standard solutions, with concentrations ranging from 0.5 to 8 mg L1, were prepared by diluting the stock solution. Standard solutions also contain IS (final concentration of 3.34 mg L1), SDS and borax with the same concentrations of the running buffer. Standard solutions were analyzed in quadruplicate. The running buffer consisted on 25 mM borax and 50 mM SDS, pH 9.2, freshly prepared every 2 days and stored at 4 C. All the solutions were filtered through a 0.22 mm membrane filter.
2.3.3.
Sample preparation for CE analysis
CE samples were prepared by adding SDS, borax and IS to the irradiated samples in order to obtain a final concentration of 50 mM, 25 mM and 3.34 mg L1, respectively.
2.3.4.
Separation conditions
Samples were injected for 4 s at 0.5 psi. Electrophoretic separations were performed in direct polarity with a positive power supply of 20 kV for 13 min. The temperature was maintained at 25 C. The resulting current was of approximately 110 mA. Detection of carbamazepine and carbamazepine photodegradation products were monitored at 210 nm. Running buffer vials were changed every 3 runs.
1097
2.4. Identification of photodegradation products by mass spectrometry The identification of carbamazepine photodegradation products was performed by electrospray mass spectrometry (ESIMS), using N2-sparged samples collected after 30 min of irradiation at pH 2.9, and not sparged samples collected after 24 h of irradiation at pH 5.8. Positive-ion ESI-MS and ESI-MS2 were carried out on a Micromass (Manchester, UK) Q-TOF2 hybrid tandem mass spectrometer. For ESI analysis, irradiated samples were diluted in methanol (0.1% formic acid v/v). Samples were introduced at a flow rate of 10 mL min1 into the ESI source. In the MS and MS2 experiments, the time-of-flight (TOF) mass resolution was set to approximately 9000. The cone voltage was 35 V, and the capillary voltage was 3 kV. The source temperature was 80 C and the desolvation temperature was 150 C. MS2 spectra were obtained using argon as the collision gas with the collision energy set between 18 and 40 eV. The data was processed using MassLynx software (version 4.0).
3.
Results and discussion
3.1.
Optimization of MEKC method
The performance of the adopted methodology was evaluated comparing the results obtained using uncoated and coated capillary columns. Initially, irradiated samples were analyzed with an uncoated capillary after being conditioned with 1 M NaOH for 30 min followed by ultra-pure water for 10 min. In Table 1, results of repeated injections of a carbamazepine standard solution (mean peak area, migration time and relative standard deviation) are shown. The results show that the method provides good repeatability of the evaluated parameters when using standard solutions. However, resolution of the peaks due to carbamazepine and to its photodegradation products was unsatisfactory in the samples irradiated for long periods of time. Also, when analyzing these samples, the repeatability of peak area was strongly affected, showing the lack of efficiency of the methodology under these conditions. Taking into account the obtained results, a dynamically coated capillary was used. As it was previously reported, dynamically coated capillaries have the advantage of improving the reproducibility (Vanhoenacker et al., 2004; Pranaityte´ and Padarauskas, 2006) by decreasing the interaction between the analytes and the capillary inner wall, avoiding variations due to possible modifications in the chemical structure of the bare silica capillary surface between repeated injections. Moreover, this type of coating has already been reported as a promising tool to improve separation efficiency (Erny et al., 2009). This procedure is easy to implement and, on the whole, consists on coating the capillary surface with a buffer containing a multiple charged polycation (polybren) and then flushing the positively charged surface with an anionic surfactant (SDS). The first layer of SDS interacts with the cationic surface of a polybren and a second layer of SDS is formed by establishing hydrophobic interactions with
1098
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 9 5 e1 1 0 4
Table 1 e Comparison of the CE methodology repeatability considering the usage of a coated and an uncoated capillary: mean and relative standard deviations (R.S.D.) of the ratio between carbamazepine (CBZ) and internal standard (IS) peak areas and CBZ migration time (n [ 4). Composition of the standard solution
Uncoated Capillary CBZ stock IS Coated Capillary CBZ stock IS 50% CBZ stock þ 50% running buffer IS 90% CBZ stock þ 10% running buffer IS
Ratio between CBZ and IS peak areas Mean (a. u.)
R.S.D. %
Mean (min)
R.S.D. %
9.36
1.61
10.67
0.04
9.29 4.26 7.13
4.08 0.44 0.78
10.36 9.95 10.29
0.10 0.25 0.35
the first one, resulting in a highly negatively charged surface. The chemical modifications of the capillary surface during the procedure are illustrated in the Fig. 1. After coating, the performance of the new methodology was evaluated (results presented in Table 1). Similarly to the previous case, the method proved to have good repeatability, however, in this case, it was possible to separate carbamazepine from its photoirradiation products. The comparison of the electrochromatograms of a sample irradiated for 24 h, obtained with a coated capillary (A) and an uncoated capillary (B) is shown in Fig. 2. The hypothesis of co-migration of carbamazepine and photodegradation products in the latter case, as well as the ability of the coated capillary to perform the separation efficiently, is clearly demonstrated. Furthermore, the addition of running buffer to the irradiated samples, prior to MEKC analysis, substantially improved the repeatability of the ratio between carbamazepine and IS peak areas. The addition of 10% of the running buffer was chosen (instead of 50%) to avoid a substantial dilution of the samples. The method turned out to be repeatable between successive runs without the need to recoat the capillary. It was also possible to use an efficient and faster procedure of washing between runs (2 min) when compared to traditional MEKC methodologies, increasing even more the speed of analysis that characterize CE related methods. The good stability of the coating for several weeks was also verified, for which it is indispensable the storage of the capillary filled with water and with its extremities immersed in ultra-pure water.
3.2.
CBZ migration time
Calibration curve for MEKC
A linear calibration curve was obtained, by means of a leastsquares linear regression, using six standard solutions with concentrations ranging from 0.5 to 8.0 mg L1. The linear regression was based on the mean ratio between the peak area
of carbamazepine and the peak area of the IS that resulted from four replicate injections of each standard solution as a function of the standard solution concentration. The equation of the regression curve is given by y ¼ (0.923 0.002)x e (0.075 0.009). The correlation coefficient takes the value of 1.000, confirming the excellent linear response of the adopted methodology in the studied range of concentrations. Additionally, the limit of detection (LOD) and of quantification (LOQ) were determined according to 3sx/y/b and 10sx/y/b, respectively, where b is the slope and sx/y is the residual standard deviation of the determined linear regression (J.N. Miller and Miller, 2005). Accordingly, the LOD and LOQ values are 0.040 and 0.134 mg L1, respectively.
3.3. Carbamazepine photodegradation under simulated solar irradiation The direct photodegradation rate of carbamazepine was evaluated in aqueous solutions with a concentration of 9.5 mg L1 and pH values of 2.9, 4.0, 5.8 and 9.0. To better understand the role of oxygen and oxygen reactive species in the photodegradation process of this pharmaceutical, the carbamazepine solutions were irradiated in an oxygen saturated medium (solutions sparged with O2 prior to irradiation) and in a nitrogen-deoxygenated medium (solutions sparged with N2). In Fig. 3, the percentages of carbamazepine photodegradation as a function of irradiation time for samples not sparged (a), sparged with O2 (b) and sparged with N2 (c) are shown. It is clearly evident that higher percentages of photodegradation were attained at pH 2.9 for all the irradiated solutions. Moreover, it is also clear that the photodegradation process strongly depends on the amount of dissolved oxygen present in test solutions. For example, at pH 2.9 the oxygenated solutions reached approximately 85% of degradation after 24 h of irradiation, while in the nitrogen-deoxygenated solution the same value was observed in a period of 1 h.
Fig. 1 e Schematic representation of the capillary coating used in the developed methodology.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 9 5 e1 1 0 4
Fig. 2 e Electrochromatograms of samples resulting from the irradiation of carbamazepine for 24 h, obtained using a coated capillary (A) and an uncoated capillary (B). Peak identification: 1 e Ethylvaniline (internal standard); 2 e Carbamazepine; 3 and 4 e photodegradation products. Experimental conditions: capillary 0.5 m length (0.4 to detector), 75 mm internal diameter, applied voltage 20 kV, capillary temperature 25 C, running buffer 50 mM SDS and 25 mM borax, detection at 210 nm.
However, this dependence is only observed at low pH; significant differences in the photodegradation extent tend to disappear at high pH values. Very low photodegradation was observed at the highest pH studied (9.0) in all oxygenation levels. To allow a better comparison of results obtained under distinct experimental conditions, the determination of kinetics parameters was performed by fitting a first order kinetics to each set of results. Considering the Naperian logarithm of the ratio between the concentration of carbamazepine at a give irradiation time (Ct) and the initial concentration of carbamazepine (C0) as a function of the irradiation time, linear regressions were obtained. Correlation values (r) for solutions sparged with O2 and not sparged range from 0.97 to 0.99; solutions sparged with N2 have lower correlation values (between 0.89 and 0.98). The satisfactory linearity of the regressions allowed the determination of the apparent pseudo-first order photodegradation
1099
rate constants (k) and half-life times (t1/2). The results are presented in Table 2. The most relevant result was obtained for degradation in deoxygenated solutions at pH 2.9 in which the photodegradation rate of carbamazepine was increased by a factor of 6 and 17 when compared with non-sparged and O2-sparged test solutions, respectively. A considerable increase on the photodegradation rate (by a factor of 6) was also observed at pH 4.0 in nitrogen-deoxygenated solutions. The presence of oxygen undoubtedly inhibits the degradation process; the higher the concentration of dissolved oxygen, the lower the photodegradation rate. However, and as it was stated before, the effect of the oxygenation level of the medium is negligible at pH 9.0. The described results point out that reactive oxygen species (such as singlet oxygen) do not have a significant role on the degradation pathway of carbamazepine, seeing that the presence of molecular oxygen did not increase the rate of the degradation process. In addition, and considering the fact that at low pH and in the presence of oxygen, significantly lower degradation rates were observed and that triplet excited states are efficiently quenched by oxygen, it is predictable that one of the most significant photodegradation pathways of carbamazepine arises from its triplet excited states that were quickly deactivated in highly oxygenated solutions. One tentative hypothesis to explain the observed phenomenon is the possible formation of hydrated electrons. Hydrated electrons, unitary negative charges chemically unbounded to any particular atom, are considered the most elementary and reactive nucleophiles (Anbar and Hart, 1964). Hydrated electrons have been shown to be photoproduced by a wide variety of aromatic compounds, and quickly react with organic compounds that have electronegative atoms (Anbar and Hart, 1964; Joschek and Grossweiner, 1966; Zepp et al., 1987). One known compound that photoproduces hydrated electrons is acridine (Joschek and Grossweiner, 1966; Kellmann and Tfibel, 1980, 1982) which is, curiously, one of the most common direct photodegradation product of carbamazepine (Chiron et al., 2006) and was identified in this study (see section 3.5). The possible production of hydrated electrons during the irradiation experiments, and its reactivity towards carbamazepine, is a possibility that would also explain the degradation decrease in highly oxygenated mediums, taking into account that hydrated electrons are effectively scavenged by molecular oxygen (Zepp et al., 1987).
Fig. 3 e Photodegradation of carbamazepine as a function of the irradiation time under different pH: > - pH 2.9; , e pH 4.0; B e pH 5.8 and Δ - pH 9.0. a) Not sparged; b) sparged with O2; c) sparged with N2. Each point corresponds to the mean percentage of photodegradation of three sample replicates. Relative standard deviations are below 10%. Dotted lines are shown only for clarity purposes.
1100
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 9 5 e1 1 0 4
Table 2 e Correlation coefficient (r), half-life time (t1/2) and apparent photodegradation rate (k) of carbamazepine obtained by fitting a first order kinetics model to the photodegradation data, considering different pH and dissolved oxygen conditions. n represents the number of points used in the linear regression and s represents the standard deviation. Halflife times converted to units equivalent to summer sunny days (SSD) and average quantum yields (fave) of carbamazepine photolysis are also presented (discussed in section 3.4).
Not Sparged
Sparged with O2
Sparged with N2
pH
r
n
t1/2 s/(h)
k s/(h1)
t1/2 s/(SSDa)
4ave
2.9 4.0 5.8 9.0 2.9 4.0 5.8 9.0 2.9 4.0 5.8 9.0
0.994 0.986 0.992 0.987 0.996 0.971 0.975 0.993 0.925 0.980 0.888 0.924
4 5 7 5 5 6 5 6 4 6 5 5
2.9 0.2 63 6 17 1 95 9 8.6 0.5 58 7 36 5 67 4 0.5 0.1 12 1 66 20 63 15
0.24 0.02 0.011 0.001 0.040 0.002 0.007 0.001 0.081 0.004 0.012 0.001 0.019 0.003 0.010 0.001 1.3 0.3 0.060 0.006 0.011 0.003 0.011 0.003
e e 4.5 0.3 25 2 e e 91 18 1 e e 17 5 17 4
6.4 105 2.9 106 1.1 105 2 106 2.1 105 3.2 106 5.1 106 2.7 106 3.5 104 1.6 105 2.9 106 2.9 106
a 1SSD e unit equivalent to 1 summer sunny day (clear sky) at 45 N latitude. Results are shown only for experiences performed at relevant pH values for surface waters (5.8 and 9.0).
Another reasonable explanation (but again, tentative), arises from the pH dependence of these results suggesting that different forms of carbamazepine could be implicated. Several cases of pharmaceuticals that have different direct degradation rates which vary with the predominant form in solution (cationic or anionic forms) have been reported (Arnold and McNeill, 2007). It is also reported in the literature that the quantum yield of a degradation process could be pH dependent when different anionic or cationic forms are present (Arnold and McNeill, 2007). In the particular case of carbamazepine, it has a pKa of 13.9 (Jones et al., 2002) related to the deprotonation of the NH2 group and a pKa of 2.3 (Nghiem et al., 2005) related to the protonation of the amino groups. This means that at environmentally relevant pH, carbamazepine should be present in its neutral form. However, at the tested pH 2.9, a protonated form of carbamazepine could exist in equilibrium with the neutral form at a concentration high enough to interfere with the photodegradation rate. Nevertheless, taking into account the observed pH dependence,the existence of a protonated form of carbamazepine at very low pH might not be enough to explain the obtained results, suggesting that a different pH dependence source should be operating. To fully elucidate this point further research is needed, including the mechanistic study of the photodegradation processes of carbamazepine at different pH.
3.4. Determination of the apparent quantum yield of carbamazepine The quantum yield (4) of carbamazepine photolysis can be defined as the ratio between the carbamazepine photodegradation rate and the rate of light absorption. When considering the environmental relevance of photodegradation processes, this parameter is of crucial importance to assess the persistence of a contaminant. Its determination also allows a valid comparison between other studies reported in the literature.
The carbamazepine’s photodegradation quantum yield was determined considering an overall average over the lamp emission wavelength range (290e800 nm) and respective emission intensities. The approach followed was adapted from Chiron et al. (2006). Accordingly, the carbamazepine average quantum yield (4ave) is given by (equation (1)): fave ¼ P
C k 0 ; I0li 1 103li bC0
(1)
where k is the apparent first order rate constant (s1), C0 is the initial concentration of carbamazepine in solution (mol L1), I0li is the lamp emission intensity at the wavelength li (Ein L1 s1), 3 is the molar absorbivity of carbamazepine at li (L mol1 cm1) and b is the path length inside the photoreactor (cm) (diameter of the cylindrical photoreactor, 1.5 cm). The calculation was made considering a volume of 25 mL of irradiated solution and a solution exposure area of 53 cm2. Emission lamp spectrum and absorption spectrum of carbamazepine are shown in the Supporting Information. The values obtained for all the experimental conditions are presented in Table 2 and vary between 2 106 and 3.5 104, being consistent with previously published literature data (Chiron et al., 2006; Lam and Mabury, 2005; Andreozzi et al., 2003).
3.5.
Environmental relevance of the results
The results presented in Table 2 (half-life times and apparent pseudo-first order rate constants) are related to specific experimental conditions: samples were irradiated with irradiance of 55 W m2 in the range 290e400 nm (or 550 W m2 in the range 290e800 nm, according to the manufacturer specifications). As the adopted lamp aims to simulate sunlight, it is reasonable to convert the obtained results to outdoor half-life times. Vione et al. (2006) and Minero et al. (2007) had shown that on a cloudless summer day (45 N latitude) the sunlight has an irradiance of 22 W m2 (290e400 nm) and the total energy reaching the ground is 7.5 105 J m2. These measurements were made using the same model of multimeter from
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 9 5 e1 1 0 4
Fig. 4 e Proposed structures for the photodegradation products of carbamazepine identified by ESI(D)MS and MS2.
1101
Co.fo.me.gra. Therefore, it is possible to convert the half-life times of carbamazepine in units equivalent to summer sunny days: the total energy reaching the ground during 24 h under the referred conditions are equivalent to 3.8 h of irradiance under the conditions adopted in this study. Thus, results obtained at pH values considered environmentally relevant to surface waters (5.8 and 9.0) were converted to equivalents to summer sunny days (SSD) and presented in Table 2. Note that this conversion takes into account the day/night cycle, as explained by Vione et al. (2006). With this approach it is possible to estimate the real behavior of carbamazepine in the environment. According to the obtained set of results, this pharmaceutical can persist in the environment between 4.5 and 25 summer cloudless days, depending on the surface water pH and its level of aeration. These results are of great significance to assess the persistent of this pharmaceutical for example in atmosphere open aeration tanks, commonly found in urban Wastewater Treatment Plants, where pH values usually oscillate between 6 and 9. Taking into account the presented conclusions it could be reasonably expected that carbamazepine would take 1e4
Table 3 e Mass spectrometry data for the identification of carbamazepine photodegradation products: molecular weight (Mw), ions detected in ESI(D)MS and fragment ions detected in ESI(D)MS2. For each case, relative abundance of the relevant fragment ions and respective losses are also presented. The identification of the photoproducts using roman numbers I to VII is in accordance with Fig. 4. Compound
Mw
ESI(þ)MS m/z þ
CBZ
236
237 [M þ H]
I
179
180 [M þ H]þ
II
195
196 [M þ H]þ
III
207
208 [M þ H]þ
IV
209
210 [M þ H]þ
V
225
226 [M þ H]þ
VI
270
293 [M þ Na]þ
VII
450
473 [M þ Na]þ
ESI(þ)MS2 m/z (relative abundance %, loss)
Samples
220 (2, -NH3) 194 (100, -NHCO) 179 (2, -NHCO and -NH) 165 (1, -NHCO, -NH and -CH2) 152 (80, -H2CN) 128 (10) 195 (25, -H) 180 (3, -NH2) 168 (15, -CO) 167 (100, -HCO) 180 (100, -CO) 179 (25, - HCO) 178 (20, -H2CO) 152 (10, -H2CN and -CO) 182 (85, -CO) 180 (100, -H2CO) 208 (90, -H2O) 180 (93, -H2O and CO) 182 (100, -CHOHCH2) 276 (3, -NH3) 275 (8, -H2O) 250 (28, -NHCO) 248 (25, - COHNH2) 232 (100, -NHCO and -H2O) 456 (10, -NH3) 439 (28,-NH3 and -NH3) 428 (48, -COHNH2) 413 (60, - COHNH2 and -NH) 411 (100, - COHNH2 and -NH3) 383 (15,- COHNH2 and -COHNH2)
e
A and B B
B >> A
B >> A B
A and B
B >> A
*Sample A: CBZ solution irradiated during 24 h, 55 W m2 (290e400 nm), in ultra-pure water. **Sample B: CBZ solution irradiated during 30 min, 55 W m2 (290e400 nm), in ultra-pure water sparged with N2, pH 2.9 (pH adjusted with formic acid).
1102
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 9 5 e1 1 0 4
weeks of sunny weather to be eliminated from surface waters by photodegradation processes.
3.6. Identification of photodegradation products by mass spectrometry Various photodegradation products of carbamazepine were identified by mass spectrometry (compounds I-VII, Fig. 4). The samples were analyzed by ESI(þ)MS without a prior separation process, using not sparged samples collected after 24 h of irradiation at pH 5.8 (sample A) and N2-sparged samples collected after 30 min of irradiation at pH 2.9 (sample B). The mass spectra of the selected samples were compared with a carbamazepine solution not exposed to simulated solar radiation and the ions [M þ H]þ and/or [M þ Na]þ of possible photodegradation products were identified in both samples. Subsequently, the structure of the photoproducts was tentatively assigned to each ion based on the fragmentation pathway observed in the ESI-MS2 spectra (results reported in Table 3). As far as photodegradation product I (MW 179, [M þ H]þ ¼ 180) is concerned, ESI-MS and ESI-MS2 spectra patterns are consistent with acridine, one of the most common carbamazepine photoproducts, known to have mutagenic and carcinogenic activities. The [M þ H]þ ion of photoproduct II (Mw 195) at m/z 196 could correspond to acridone or 9-hydroxyacridine. Nevertheless, this product was identified as acridone seeing that its ESI-MS2 spectrum is characterized by a base peak at m/z 167 that could be assigned to the loss of a CO group (28 Da) and it is not possible to observe the loss of a water molecule (H2O, 18 Da) characteristic of hydroxylated products. The ESI-MS2 spectra of the photodegradation product III (Mw 207, [M þ H]þ ¼ 208) allow identifying it as acridine-9-carbaldehyde. The increase of the molecular weight by 28 units in comparison to acridine and the base peak at m/z 180 is fully consistent with an acridine moiety containing a carbonyl group. Other alternatives for photodegradation products with the same molecular weight were not supported by the ESI-MS2 spectra. Photoproduct IV (Mw 209, [M þ H]þ ¼ 210) is structurally similar to photoproduct III. The increase of the molecular weight by two units corresponds to two hydrogen atoms. Photoproduct V corresponds to a hydroxylation of compound IV; the ESI-MS2 spectrum pattern is similar to the one found for compound IV with an extra ion at m/z 208 that arises from the loss of a water molecule, which reinforces the presence of the OH group on the proposed structure. Compound VI was attributed to one of the possible dihydroxicarbamazepine isomers. The ESI-MS2 spectrum of VII (Mw 450, [M þ Na]þ ¼ 473) is characterized by the loss of one and two NH3 groups (m/z 456 and 439), and also the loss of one and two COHNH2 groups (m/z 428 and 383); the ion attributed to the base peak corresponds to a combined loss of one group NH3 and one group COHNH2 (at m/ z 411). Some examples of ESI-MS and ESI-MS2 spectra are shown in the Supporting Information. The identified carbamazepine photodegradation products I-III and V-VII are in accordance with previously published studies (Chiron et al., 2006; Kosjek et al., 2009). However, to the best of our knowledge, photoproduct IV has not been identified
until now. It is also important to highlight that the two distinct analyzed experimental conditions differed on the presence of products II and V that were not detected in sample A but appeared in sample B. In addition, experimental conditions applied to sample B resulted on the appearance of products III, IV and VII in more significant quantities than in sample A.
4.
Conclusions
The present study has shown that the direct photodegradation rate of carbamazepine is pH dependent. Lower pH results in increased rates, while higher pH is compatible with very slow degradation processes. Moreover, especially at acidic pH, it was clearly shown that the oxygenation level of waters also has a noteworthy influence on the process: the presence of oxygen is responsible for a significant decrease on the photodegradation rate of carbamazepine. Despite the fact that the extremely high photodegradation rates were obtained at pH values that are not significant in an environmental context, this study highlighted new aspects of the photodegradation process of this drug that have not been explored until now, particularly the role played by oxygen on the photodegradation. Considering the studied environmentally relevant pH conditions (5.8 and 9.0), the photodegradation rate of carbamazepine is relatively slow. The elimination of this pharmaceutical by photodegradation processes could take from 4.5 to 25 sunny summer days. These results clearly consolidate previous knowledge that this pharmaceutical is being potentially accumulated in the environment and are fully consistent with the high number of occurrences of this compound in several environmental matrices. Additionally, seven photodegradation products were identified, including acridine (known due to its mutagenic and carcinogenic activities) and one newly identified compound. The described aspects of carbamazepine degradation constitute a helpful tool to develop further investigation in what concerns the environmental persistence and relevant elimination methodologies of this widely spread contaminant.
Acknowledgments Vaˆnia Calisto and Guillaume L. Erny thank FCT (Fundac¸a˜o para a Cieˆncia e Tecnologia e Portugal) for a PhD grant (SFRH/BD/ 38075/2007) and a postdoctoral grant (SFRH/BPD/30548/2006), respectively. The authors also acknowledge FCT for financially supporting QOPNA and RNEM. The authors also appreciate the contribution of the editor and reviewers whose helpful comments improved the quality of this manuscript.
Appendix. Supplementary data The supplementary data associated with this article can be found in the on-line version at doi:10.1016/j.watres.2010.10.037.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 9 5 e1 1 0 4
references
Anbar, M., Hart, E.J., 1964. The reactivity of aromatic compounds toward hydrated electrons. Journal of the American Chemical Society 86 (24), 5633e5637. Andreozzi, R., Marotta, R., Pinto, G., Pollio, A., 2002. Carbamazepine in water: persistence in the environment, ozonation treatment and preliminary assessment on algal toxicity. Water Research 36 (11), 2869e2877. Andreozzi, R., Marotta, R., Paxe´us, N.A., 2003. Pharmaceuticals in STP effluents and their solar photodegradation in aquatic environment. Chemosphere 50 (10), 1319e1330. Arnold, W.A., McNeill, K., 2007. Transformation of pharmaceuticals in the environment: photolysis and other abiotic processes. In: Petrovic, M., Barcelo´, D. (Eds.), Analysis, Fate and Removal of Pharmaceuticals in the Water Cycle. Elsevier, Amsterdam, The Netherlands. Bahlmann, A., Weller, M.G., Panne, U., Schneider, R.J., 2009. Monitoring carbamazepine in surface and wastewaters by an immunoassay based on a monoclonal antibody. Analytical and Bioanalyical Chemistry 395 (6), 1809e1820. Bendz, D., Paxe´us, N.A., Ginn, T.R., Loge, F.J., 2005. Occurrence and fate of pharmaceutically active compounds in the environment, a case study: Hoje River in Sweden. Journal of Hazardous Materials 122 (3), 195e204. Boreen, A.L., Arnold, W.A., McNeill, K., 2003. Photodegradation of pharmaceuticals in the aquatic environment: a review. Aquatic Sciences 65 (4), 320e341. Brain, R.A., Johnson, D.J., Richards, S.M., Sanderson, H., Sibley, P.K., Solomon, K.R., 2004. Effects of 25 pharmaceutical compounds to Lemna gibba using a sevenday static-renewal test. Environmental Toxicology and Chemistry 23 (2), 371e382. Brooks, B.W., Foran, C.M., Richards, S.M., Weston, J., Turner, P.K., Stanley, J.K., Solomon, K.R., Slattery, M., La Point, T.W., 2003a. Aquatic ecotoxicology of fluoxetine. Toxicology Letters 142 (3), 169e183. Brooks, B.W., Turner, P.K., Stanley, J.K., Weston, J.J., Glidewell, E. A., Foran, C.M., Slattery, M., La Point, T.W., Huggett, D.B., 2003b. Waterborne and sediment toxicity of fluoxetine to select organisms. Chemosphere 52 (1), 135e142. Brunton, L.L., Parker, K.L., Blumenthal, D.K., Buxton, I.L.O., 2008. Goodman & Gilman’s Manual of Pharmacology and Therapeutics. McGraw-Hill, San Diego, California. Calisto, V., Esteves, V.I., 2009. Psychiatric pharmaceuticals in the environment - a review. Chemosphere 77 (10), 1257e1274. Chiron, S., Minero, C., Vione, D., 2006. Photodegradation processes of the antiepileptic drug carbamazepine, relevant to estuarine waters. Environmental Science and Technology 40 (19), 5977e5983. Clara, M., Strenn, B., Kreuzinger, N., 2004. Carbamazepine as a possible anthropogenic marker in the aquatic environment: investigations on the behaviour of carbamazepine in wastewater treatment and during groundwater infiltration. Water Research 38 (4), 947e954. Erny, G.L., Rodrigues, J.E.A., Gil, A.M., Barros, A.S., Esteves, V.I., 2009. Analysis of non-aromatic organic acids in beer by CE and direct detection mode with diode array detection. Chromatographia 70 (11e12), 1737e1742. Focazio, M.J., Kolpin, D.W., Barnes, K.K., Furlong, E.T., Meyer, M.T., Zaugg, S.D., Barber, L.B., Thurman, M.E., 2008. A national reconnaissance for pharmaceuticals and other organic wastewater contaminants in the United States - II Untreated drinking water sources. Science of the Total Environment 402 (2e3), 201e216. Glassmeyer, S., Kolpin, D.W., Furlong, E.T., Focazio, M.T., 2008. Environmental presence and persistence of pharmaceuticals:
1103
an overview. In: Aga, D.S. (Ed.), Fate of Pharmaceuticals in the Environment and in Water Treatment Systems. CRC Press, Taylor & Francis Books, Boca Raton, pp. 3e51. Gust, M., Buronfosse, T., Giamberini, L., Ramil, M., Mons, R., Garric, J., 2009. Effects of fluoxetine on the reproduction of two prosobranch mollusks: Potamopyrgus antipodarum and Valvata piscinalis. Environmental Pollution 157 (2), 423e429. Halling-Sørensen, B., Nielsen, S.N., Lanzky, P.F., Ingerslev, F., Holten Lu¨tzhøft, H.C., Jorgensen, S.E., 1998. Occurrence, fate and effects of pharmaceutical substances in the environmenta review. Chemosphere 36 (2), 357e393. Heberer, T., Reddersen, K., Mechlinski, A., 2002. From municipal sewage to drinking water: fate and removal of pharmaceutical residues in the aquatic environment in urban areas. Water Science and Technology 46 (3), 81e88. Hummel, D., Loffler, D., Fink, G., Ternes, T.A., 2006. Simultaneous determination of psychoactive drugs and their metabolites in aqueous matrices by liquid chromatography mass spectrometry. Environmental Science and Technology 40 (23), 7321e7328. Johnson, D.J., Sanderson, H., Brain, R.A., Wilson, C.J., Bestari, K. T., Solomon, K.R., 2005. Exposure assessment and microcosm fate of selected selective serotonin reuptake inhibitors. Regulatory Toxicology and Pharmacology 42 (3), 313e323. Jones, O.A., Voulvoulis, N., Lester, J.N., 2002. Aquatic environmental assessment of the top 25 English prescription pharmaceuticals. Water Research 36 (20), 5013e5022. Joschek, H.-I., Grossweiner, L.I., 1966. Optical generation of hydrated electrons from aromatic compounds. II. Journal of the American Chemical Society 88 (14), 3261. Joss, A., Keller, E., Alder, A.C., Gobel, A., McArdell, C.S., Ternes, T., Siegrist, H., 2005. Removal of pharmaceuticals and fragrances in biological wastewater treatment. Water Research 39 (14), 3139e3152. Kellmann, A., Tfibel, F., 1980. Laser-induced two-photon ionization of acridine in aqueous solution. Chemical Physics Letters 69 (1), 61e65. Kellmann, A., Tfibel, F., 1982. Radicals produced from the laserinduced photoionization of acridine in solution. Journal of Photochemistry 18 (1), 81e88. Kosjek, T., Andersen, H.R., Kompare, B., Ledin, A., Heath, E., 2009. Fate of carbamazepine during water treatment. Environmental Science and Technology 43 (16), 6256e6261. Lam, M.W., Mabury, S.A., 2005. Photodegradation of the pharmaceuticals atorvastatin, carbamazepine, levofloxacin, and sulfamethoxazole in natural waters. Aquatic Sciences 67 (2), 177e188. Madureira, T.V., Barreiro, J.C., Rocha, M.J., Cass, Q.B., Tiritan, M.E., 2009. Pharmaceutical trace analysis in aqueous environmental matrices by liquid chromatography-ion trap tandem mass spectrometry. Journal of Chromatography A 1216 (42), 7033e7042. Metcalfe, C.D., Miao, X.-S., Koenig, B.G., Struger, J., 2003. Distribution of acidic and neutral drugs in surface waters near sewage treatment plants in the lower Great Lakes, Canada. Environmental Toxicology and Chemistry 22 (12), 2881e2889. Miao, X.-S., Metcalfe, C.D., 2003. Determination of carbamazepine and its metabolites in aqueous samples using liquid chromatography-electrospray tandem mass spectrometry. Analytical Chemistry 75 (15), 3731e3738. Miller, J.N., Miller, J.C., 2005. Statistics and Chemometrics for Analytical Chemistry. Prentice Hall, Dorset England. Minero, C., Chiron, S., Falletti, G., Maurino, V., Pelizzetti, E., Ajassa, R., Carlotti, M., Vione, D., 2007. Photochemincal processes involving nitrite in surface water samples. Aquatic Sciences 69 (1), 71e85.
1104
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 0 9 5 e1 1 0 4
Nghiem, L.D., Scha¨fer, A.I., Elimelech, M., 2005. Pharmaceutical retention mechanisms by nanofiltration membranes. Environmental Science and Technolology 39 (19), 7698e7705. Petrovic, M., Barcelo´, D., 2007. Analysis, Fate and Removal of Pharmaceuticals in the Water Cycle. Elsevier, Amsterdam, The Netherlands. Pranaityte´, B., Padarauskas, A., 2006. Characterization of the SDSinduced electroosmotic flow in micellar electrokinetic chromatography with cationic polyelectrolyte-coated capillaries. Electrophoresis 27 (10), 1915e1921. Ternes, T.A., 1998. Occurrence of drugs in German sewage treatment plants and rivers. Water Research 32 (11), 3245e3260. Ternes, T.A., Herrmann, N., Bonerz, M., Knacker, T., Siegrist, H., Joss, A., 2004. A rapid method to measure the solid-water distribution coefficient (Kd) for pharmaceuticals and musk fragrances in sewage sludge. Water Research 38 (19), 4075e4084. Tixier, C., Singer, H.P., Oellers, S., Mu¨ller, S.R., 2003. Occurrence and fate of carbamazepine, clofibric acid, diclofenac,
ibuprofen, ketoprofen, and naproxen in surface waters. Environmental Science and Technology 37 (6), 1061e1068. Vanhoenacker, G., de l’Escaille, F., De Keukeleire, D., Sandra, P., 2004. Analysis of benzodiazepines in dynamically coated capillaries by CE-DAD, CE-MS and CE-MS2. Journal of Pharmaceutical and Biomedical Analysis 34 (3), 595e606. Vione, D., Falletti, G., Maurino, V., Minero, C., Pelizzetti, E., Malandrino, M., Ajassa, R., Olariu, R.-I., Arsene, C., 2006. Sources and sinks of hydroxyl radicals upon irradiation of natural water samples. Environmental Science and Technology 40 (12), 3775e3781. Zepp, R.G., Braun, A.M., Hoigne´, J., Leenheer, J.A., 1987. Photoproduction of hydrated electrons from natural organic solutes in aquatic environments. Environmental Science and Technology 21 (5), 485e490. Zhang, Y., Geißen, S.-U., Gal, C., 2008. Carbamazepine and diclofenac: removal in wastewater treatment plants and occurrence in water bodies. Chemosphere 73 (8), 1151e1161.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 0 5 e1 1 1 4
Available at www.sciencedirect.com
journal homepage: www.elsevier.com/locate/watres
Investigation on the removal of natural and synthetic estrogens using biofilms in continuous flow biofilm reactors and batch experiments analysed by gas chromatography/ mass spectrometry Christina Pieper*, Wolfgang Rotard* Berlin Institute of Technology, Department of Environmental Engineering, Chair of Environmental Chemistry, KF 3, Strasse des 17. Juni 135, 10623 Berlin, Germany
article info
abstract
Article history:
The degradation of the natural estrogen 17b-estradiol and the synthetic steroid hormone
Received 4 June 2010
17a-ethinylestradiol, two estrogens already detected in surface waters at low concentra-
Received in revised form
tion levels, was investigated using continuous flow biofilm reactors and batch experiments.
14 October 2010
Biofilms in continuous flow experiments were created by natural organisms from river
Accepted 30 October 2010
systems of the national park Unteres Odertal, Germany, whereas batch experiments were
Available online 5 November 2010
performed with isolated bacterial strains derived from biofilms. The analytical method, including solid phase extraction, silylation of analytes and measurement with GC/MS, was
Keywords:
optimised for the target compounds 17b-estradiol, 17a-ethinylestradiol and the possible
Estradiol
metabolites estrone and estriol. The performance characteristics of the analytical method,
Estrone
namely recovery, standard deviations, method detection limits (MDL) and method quan-
Ethinylestradiol
tification limits (MQL), were evaluated for accurate interpretation of degradation experi-
Microbial degradation
ments. Continuous flow biofilm reactors were operated with two different nutrient media
Naturally derived biofilms
under dosage of estradiol and ethinylestradiol. Both estrogens were rapidly degraded
Bioreactor
within several hours; the metabolite estrone (from estradiol as well as from ethinylestradiol) was detected in significant amounts and was further decomposed. In additional batch experiments using isolated bacterial strains from the natural biofilms to decompose estradiol and ethinylestradiol, different metabolisms of isolates were explored. Five of the 15 isolated bacterial strains tested degraded estradiol and ethinylestradiol with different degradation rates. The results suggest that biofilms from national park Unteres Odertal possess a high capability to aerobically decompose natural and also synthetic estrogens so that these microorganisms could provide enhanced removal of pollutants in municipal water treatment plants. ª 2010 Elsevier Ltd. All rights reserved.
1.
Introduction
The use of steroidal estrogen hormones is widespread, for example estradiol in livestock breeding and ethinylestradiol as
oral contraceptive medication. The natural steroid 17b-estradiol (E2) is rapidly oxidized to the main intermediate estrone (E1) by activated sludge organisms from sewage treatment plants (STP) and can be further metabolised to estriol (E3) (Ternes et al., 1999;
* Corresponding authors. Tel.: þ49 30 314 21978; fax: þ49 30 314 29319. E-mail address:
[email protected] (W. Rotard). 0043-1354/$ e see front matter ª 2010 Elsevier Ltd. All rights reserved. doi:10.1016/j.watres.2010.10.034
1106
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 0 5 e1 1 1 4
Lee and Liu, 2002). Nevertheless, estrogen contamination has been observed at nanograms per litre concentration levels in sewage influents and effluents and surface water resources in several studies and the actual values mainly depending on the amount of estrogens in both form conjugated and unconjugated excreted in urine and faeces (Ternes et al., 1999; Baronti et al., 2000; Heberer, 2002). Investigations of German STP influents and effluents confirmed that conjugated steroids contributed up to 50% of the total steroid concentration (Adler et al., 2001). Although the concentrations detected are very low, they may still be important for the aquatic environment and adversely affect the reproductive biology of aquatic vertebrates and other species by disrupting the normal function of their endocrine systems and by provoking feminization, for example (Purdom et al., 1994; Irwin et al., 2001). The possible ecological hazard posed by steroidal estrogens is not clearly defined, but their frequent use has increased environmental contamination and bioaccumulation risk as shown by various studies (Ternes et al., 2002; Kolodziej et al., 2004). Because of the mentioned problems, removal rates during STP have been investigated in several studies (Auriol et al., 2006). Field data suggest that the activated sludge treatment process can consistently remove over 85% of estradiol, estriol, and 17-ethinylestradiol, while the removal performance for estrone appears to be lower and more variable (Johnson and Sumpter, 2001). Suzuki and Maruyama (2006) ascribe the adsorption process onto activated sludge as being helpful for decomposition of estrogens. An approximate removal rate of 65% for E2 was observed in STP while the E1 concentration increased during the treatment (Carballa et al., 2004). It has generally been observed that primary treatment of municipal and industrial wastewaters alone results in no or only limited removal of estrogens from sewage, while secondary treatment involving activated sludge reduces significantly all estrogens concentrations (Auriol et al., 2006). In other studies, batch configurations using activated sludge were applied to investigate the microbial degradation of estrogens. Ternes et al. (1999) did not observe a significant reduction of EE2 concentrations in aerobic batch experiments containing diluted slurry of activated sludge from an STP near Frankfurt (Germany). Lee and Liu (2002) showed that E2 and E1 are not persistent and can be easily degraded by sewage bacteria. Their proposed biodegradation of E2 appeared to initiate at the hydroxy group on the C-17 (ring D) of the molecule, leading to the formation of the major metabolite E1. These results were verified by Shi et al. (2004), who detected removal of E2, E1 and E3 by activated sludge and night soil-composting microorganisms, while EE2 was not removed. On the other hand, Hashimoto and Murakami (2009) showed the degradability of EE2 within 24 h by activated sludge of selected wastewater treatment plants (Japan) using batch experiments. Research is required in order to identify and optimise the process to maximise the estrogen removal. A systematic biodegradability study needs to be conducted using mixed microbial cultures to understand estrogen removal mechanisms and pathways in an engineered system (Khanal et al., 2006). This study aimed to investigate the microbial degradation potential for biofilms derived from water systems of the national park Unteres Odertal, Germany, relating to 17b-estradiol and 17a-ethinylestradiol. In previous work, the same sourced biofilms were studied for the degradation of phenazone-type drugs
(Pieper et al., 2010). The polder areas of the national park are intensely flooded by the Odra River during winter causing exposure of local microorganisms to river pollutants. This particular event enables adsorption of contaminants onto surfaces or metabolism by local microorganisms living in biofilms of river systems of the national park Unteres Odertal. Therefore, it is plausible that these natural microbial communities in biofilms offer what are hardly explored potentials for the degradation of persistent organic compounds. So far no studies exist which examine the degradability of natural and synthetic estrogens by river-derived biofilms. In the present study, the suitability of the sample clean-up procedure, derivatisation and determination step by GC/MS had first to be optimised and confirmed for target analytes E2 and EE2 and metabolites E1 and E3. Subsequently, the behaviour of target analytes exposed to selected biofilms was investigated using laboratory scale continuous flow biofilm reactors. Additional batch tests with isolated bacterial strains derived from biofilms were performed to investigate the degradation potential of selected isolated organisms obtained from national park Unteres Odertal.
2.
Experimental
2.1.
Standard compounds and chemicals
All analytical standards were of high purity grade (97%). The analytes 17b-estradiol, 17a-ethinylestradiol and metabolites estrone and estriol were purchased from Dr. Ehrenstorfer (Augsburg, Germany). The isotopically labelled compounds for internal quantification, 17b-Estradiol-16, 16, 17-D3 (D3-E2) and 17a-Ethinylestradiol-2, 4, 16, 16-D4 (D4-EE2), were also obtained from Dr. Ehrenstorfer (Augsburg, Germany). Stock solutions of 1 mg mL1 and dilutions were prepared in methanol and stored at 4 C in the dark until use. Derivatisation reagents N-methyl-N-(trimethylsilyl)trifluoroacetamide (MSTFA) and N, O-bis(trimethylsilyl)trifluoroacetamide þ 1% trimethylchlorsilane (BSTFA þ TMCS) were from MachereyeNagel (Dueren, Germany). Acetic anhydride and pyridine were supplied by Roth (Karlsruhe, Germany) and dried using molecular sieve. The solvents methanol, cyclohexane and ethyl acetate of GC/MS grade were also purchased from Roth (Karlsruhe, Germany). Chemicals for growing solution leptothrix strains media 2 (LSM2, (Atlas, 1997)) were purchased from Roth GmbH (Karlsruhe, Germany) and VWR (Dresden, Germany).
2.2.
Sample clean-up, derivatisation and analysis
Samples from the continuous flow bioreactors and batch experiments using isolated bacterial strains were stored at 21 C and brought up to room temperature prior to preparation and analysis. Before extraction of starting analytes (E2 and EE2) and metabolites formed (E1 and E3), each sample was spiked with 250 ng of the internal standards D3-E2 and D4-EE2. Extraction of 50 mL sample volumes was performed using solid phase extraction (SPE) cartridges (Isolute ENV þ sorbent 100 mg, Biotage, Sweden) pre-conditioned and equilibrated with methanol and distilled water (5 mL each). The sorbent was washed with 5 mL of the water/methanol (3/1 v/v)
1107
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 0 5 e1 1 1 4
mixture to eliminate matrix compounds. The elution step was carried out using 5 mL of a methanol/ethyl acetate mixture (9/1 v/v). The eluent solutions were then evaporated to dryness under a gentle nitrogen stream at 40 C, quantitatively transferred to vials using 200 mL and 100 mL methanol in sequence, evaporated to dryness again and derivatised using 15 mL MSTFA combined with 35 mL pyridine. The incubation was effected at 60 C within 60 min. After cooling, the derivatisation reagents were evaporated and the silylated sample extracts were dissolved in 50 mL cyclohexane and subsequently analysed by gas chromatography/mass spectrometry (GC/MS). A 2 mL aliquot was injected into the gas chromatograph (GC, Agilent 5890, Waldbronn, Germany) combined with mass spectrometer (MS, Agilent 5972, Waldbronn, Germany). The split/splitless inlet was operated isothermal in splitless mode at 300 C. The derivatised analytes were separated across a DB-5ms column (length 30 m, inner diameter 0.25 mm, film thickness 0.25 mm; J & W scientific) combined with a deactivated fused silica pre column (length 10 m, inner diameter 0.25 mm; J & W scientific) under a temperature program that began at 70 C, held for 1 min, then increased at 30 C min1 to 240 C, held isothermal for 1 min, then increased at 1.5 C min1 to 270 C, and continued increasing at 30 Ce300 C with a 1-min hold. The carrier gas (helium, pureness 5.0) had a linear velocity of 37 cm s1. The Transferline was heated to 300 C, while the source temperature was 180 C. For improved sensitivity, selected ion monitoring was used for quantification. Derivatised analytes were identified by retention times and ratios between molecular ions and three fragment ions (Table 1), which were obtained by selected ion monitoring (SIM mode). Internal quantification of results for E2, E1 and E3 was based on the response obtained for D3-E2 while the internal quantification of EE2 was based on D4-EE2. This procedure allows correction of possible concentration changes due to the sample preparation step and slight volume deviations to avoid misinterpretation of the degradation study. Covering the relevant concentration levels of the degradation studies, calibration solutions for each compound were prepared at 12 different concentration levels in the range 0.05 mg L1 to 90 mg L1. Compounds for internal quantification (D3-E2 and D4-EE2) were added to all calibration solutions analogue to samples at a concentration of 5 mg L1 each. For each analyte recovery, standard deviation and coefficient of variation were determined for the different nutrient media matrices LSM2 diluted 1:100 and LSM2 diluted 1:100 without beef and yeast extract used in batch experiments. To
this end, the solutions were spiked with the respective compounds to give a concentration of 10 mg L1 prior to sample preparation. Ten samples were extracted for each matrix and analysed according to the procedure described above. In addition, method detection limits (MDL) and method quantification limits (MQL) were calculated using the calibration graph method according to the German standard method DIN 32645 (2008) using spiked blank matrix samples (LSM2 diluted 1:100 and LSM2 diluted 1:100 without beef and yeast extract) at concentration levels in the range 0.001 mg L1 to 0.5 mg L1 and extracted and analysed with the optimised method (see above).
2.3.
Biodegradation experiments
Two different series of experiments were carried out to investigate the degradation of E2 and EE2 by microorganisms derived from national park Unteres Odertal. Using continuous flow biofilm reactors with two different nutrient conditions, the degradation potential of biofilms was first investigated. In the second study, isolated biofilm derived bacterial strains were investigated with respect to their metabolism of E2 and EE2 in batch experiments under limited nutrient conditions.
2.3.1.
Lab-scale continuous flow biofilm reactor
The degradation potential of microorganism communities in biofilms was investigated using two biofilm reactors. Each bioreactor consisted of a glass column filled with biofilms grown on glass tubes. The construction schema is shown in Fig. 1. Operation of continuous flow biofilm reactors were the same as previously described by Pieper et al. (2010). Each bioreactor consisted of a glass column (height 74 cm, inner diameter 10 cm) with a total inner volume of about 5 L, filled with glass tubes populated with biofilms. Biofilms grew on tubes exposed for about one month to river water of the national park Unteres Odertal. Five ports along the glassware columns enabled sampling at starting concentrations and different degradation stages. The growing medium and compounds under investigation (i.e. E2 and EE2) were continuously pumped into the reactors by different peristaltic pumps to permit adjustment of the respective concentrations. Starting concentrations for each compound were 100 mg L1. Since the occurrence of iron precipitating bacteria in these biofilms had been found in previous studies, we selected a cultivation medium which contains dissolved iron. Two different nutrient compositions were tested for each compound (E2 and EE2),
Table 1 e SIM conditions for GC/MS measurements, identification and quantification. Analytes (trimethylsilyl-derivatives)
Retention time [min]
Ion 1a (m/z)
Ion 2 (m/z)
Ion 3 (m/z)
13.52 12.98 15.48 17.19 13.49 15.43
416 342 440 504 419 444
401 327 425 386 404 429
325 314 285 345 328 287
Estradiol Estrone Ethinylestradiol Estriol d3-Estradiol d4-Ethinylestradiol a All Ion 1 are the molecule ions [M]þ
Ion 4 (m/z)
257 311
1108
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 0 5 e1 1 1 4
temperature. For degradation studies, the nutrient media was spiked with 100 mg L1 each of E2 and EE2 so that each bacterial strain was cultivated in the presence of both compounds. Overall cultivation time was three weeks, samples of 50 mL being taken after 1, 2 and 3 weeks and stored at 21 C until clean-up and analysis (see 2.2). All organisms were cultivated in duplicate. A sterile negative control was applied and sampled and analysed in the same way to confirm the microbial formation of metabolites occurred only in incubated samples.
3.
Fig. 1 e Schematic representation of the biofilm reactors operated in continuous flow-mode.
Results and discussion
The present study investigated the biodegradability of 17b-estradiol and 17a-ethinylestradiol and the formation of metabolites estrone and estriol by bacteria communities and isolates derived from national park Unteres Odertal. Two different experimental setups, i.e. lab-scale continuous flow biofilm reactors and batch experiments in Erlenmeyer flasks, were used to exploit the degradation pathways. In order to ensure reliable interpretation of the degradation studies, sample clean-up and preparation procedure had to be optimised and validated initially.
3.1. Sample preparation and performance data of chemical analysis using in the first case the nutrient media LSM2 in 1:100 diluted form, and in the second case the same nutrient media LSM2 1:100 but without meat and yeast extract in order to limit nutrient supply even more, thus supporting the metabolism of the starting compounds. The flow rates were adjusted to provide a total hydraulic retention time of about 32 h. All reactors were operated without sampling under aerobic conditions giving the nutrient and estrogen solutions for one week to get a dynamic balance of substances. Then samples were taken every second day at the five different sampling ports of the reactors, so that the concentrations of the starting compounds and possible metabolites could be determined after exposure to the biofilm for 0, 8, 16, 24 and 32 h. Using the first nutrient media, the reactors were sampled for over ten weeks, while the reactor operation using the limited nutrient conditions lasted for over six weeks. 50 mL of sample volumes were taken and extracted, derivatised and analysed using the optimised method described in 2.2.
2.3.2.
The analysis of starting compounds E2 and EE2 and their metabolites E1 and E3 included solid phase extraction, derivatisation to increase analyte volatility and thermal stability, and finally measurement with GCeMS avoiding successfully the occurrence of signal suppression by matrix compounds if LC-MS/MS would be used (Lin et al., 2007). Three derivatisation methods were tested to compare the reaction products concerning their response in GC/MS: silylation with BSTFA þ TMCS and with MSTFA plus pyridine, and acetylation with acetic anhydride and pyridine. Zhang and Zuo (2005)
Biofilm derived isolates in batch experiments
Batch measurements were made with various isolated bacteria (isolated by working group of Prof. Szewzyk, TU Berlin) derived from biofilms of national park Unteres Odertal. The bacterial biofilm community has been investigated applying traditional cultivation techniques in combination with molecular methods. More than 200 different ion-precipitating bacteria were isolated and phylogenetically characterised (Schmidt, 2008). The same bacterial strains were chosen as investigated by Pieper et al. (2010) in previous work on the degradation of selected pharmaceutical compounds. 15 isolated bacterial strains were selected and cultivated in Erlenmeyer flasks using 200 mL of the 1:100 diluted nutrient media under aerobic conditions and incubated on a mechanical shaker at room
Fig. 2 e Products of derivatisation methods using MSTFA, BSTFA with TMCS and acetic anhydride. 20 ng of each derivatised substance (E2, EE2, E1 and E3) were analysed with GC/MS.
1109
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 0 5 e1 1 1 4
Table 2 e Recovery (R), standard deviation (SD), coefficient of variation (CV) and method detection limit (MDL) and method quantification limit (MQL) according to DIN 32645 for selected analytes in different matrices, analytes were extracted and quantified with described method. For details see text. Analyte
E2 EE2 E1 E3
nutrient media diluted 1 to 100 1
nutrient media diluted 1 to 100 without meat and yeast
R (%)
SD (%)
CV (%)
MDL (ng L )
MQL (ng L1)
R (%)
SD (%)
CV (%)
MDL (ng L1)
MQL (ng L1)
97.7 106.1 98.6 65.6
0.7 5.9 21.7 13.1
0.7 5.6 22.0 20.0
28 78 135 251
81 230 805 1086
91.5 115.9 107.9 57.0
2.6 9.4 9.7 18.4
2.8 8.1 9.0 32.4
16 63 122 70
47 186 414 204
reported on solutions for simultaneous determination of estrone and 17a-ethinylestradiol silylated with BSTFA, because the trimethylsilyl (TMS) derivatives of EE2 partially convert into corresponding TMS derivative of estrone (E1) (Shareef et al., 2004). In Fig. 2, the results of the three tested derivatisation methods are presented comparing peak areas of the GC/MS-signals (total ions) for the respective substances. Acetylation gave too small a yield for E2, EE2 and E3. The three hydroxyl groups of E3, the two of E2 and the single hydroxyl group of E1 were acetylated completely so that only one derivatisation product was generated from each steroid hormone. Acetylating EE2 was difficult because only one of the two hydroxyl groups was acetylated which resulted in low GC/MS response. Using silylation, every hydroxyl group was
derivatised, even both of EE2. Silylation using MSTFA gave similar results to BSTFA þ TMCS; the product of E3 gave higher response using MSTFA and the product of E1 offered higher values using BSTFA þ TMCS. We finally chose MSTFA as derivatisation reagent because of the high response of silylated E3, since E3 is taken to be formed in lowest amounts by biodegradation in the following studies and hence maximum detection sensitivity is required. Conversion of EE2 derivatives to E1-derivatives resulting in silylation with MSTFA and pyridine as organic solvent was excluded by checking the derivatisation of single EE2 with chosen reagents. The capillary column DB5-ms using conditions described in 2.2 satisfied the aim of chromatographic separating of the various analytes.
Fig. 3 e Concentrations of natural and synthetic estrogens and metabolites on different sampling days and over the whole period of experiment. Degradation experiments with continuous flow biofilm reactors (nutrient media diluted 1:100) spiked with different estrogens at 100 mg LL1 and a hydraulic retention time of 32 h (a) E2, sampling day 29; (b) E2, mean values of period of experiment; (c) EE2, sampling day 26; (d) EE2, mean values of period of experiment.
1110
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 0 5 e1 1 1 4
For extraction of each analyte and metabolites from an aqueous sample, good results were achieved using SPE cartridges with Isolute ENV þ sorbent. Extraction recoveries (R), standard deviations (SD) and coefficients of variation (CV) of the target compounds E2 and EE2 and the metabolites E1 and E3 were determined for the two different nutrient media (described in 2.3.1). Method detection limits (MDL) and method quantification limits (MQL) were determined according to the German standard method DIN 32645 (2008). In Table 2, performance characteristics of the optimised clean-up, derivatisation and GC/MS method are given for the determination of selected analytes and metabolites in the two different nutrient media. Recoveries, standard deviations and coefficients of variation determined in both media show reasonably good values for the intended experiments, except for E3, which possibly gives lower recovery values in the extraction process because of its high polarity. The MQL values for E3 and E1 are considered as not really applicable using the nutrient media LSM2 1:100 for the present investigation. The nutrient media diluted 1:100 was used to investigate the microbial degradation of E2 and EE2 with continuous flow biofilm reactor and batch experiments with isolated bacteria. Using starting concentrations of 100 mg L1, at least 1% E3 must be formed to get
a detectable quantity. This is an acceptable and realistic range for formation, therefore these MQL values are acceptable for the intended purpose. The same nutrient media was limited even more by omitting meat and yeast extract in order to examine the formation of metabolites E1 and E3 in continuous flow biofilm reactors by upgrading the MQL. Clearly, this nutrient-reduced media does not interfere in the determination of E3, reflected in decreased MDL and MQL values. All calibration graphs were linear over the investigated concentration levels starting at MQL of each substance to 90 mg L1 expressed by correlation coefficients (E2: 0.9927; EE2: 0.9973; E1: 0.9966; E3: 0.9852). In conclusion, the validation data show that the experimental conditions used in this study are well suited to the determination of the selected analytes and metabolites.
3.2. Removal of 17b-estradiol and 17a-ethinylestradiol by biofilms in bioreactors Different nutrient conditions of the biofilm reactor were tested to get more information about degradation possibilities and pathways for studied bacteria organism communities. The results are presented as measured concentrations in mg L1.
Fig. 4 e Concentrations of natural and synthetic estrogens and metabolites on different sampling days and during the whole period of experiment. Degradation experiments with continuous flow biofilm reactors (nutrient media diluted 1:100 except meat and yeast extract) spiked with different estrogens at 100 mg LL1 using a hydraulic retention times (hrt) of 32 h (a) E2, sampling day 27; (b) E2, mean values of period of experiment; (c) EE2, sampling day 20; (d) EE2, mean values of period of experiment.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 0 5 e1 1 1 4
1111
Fig. 5 e Results of the sterile negative control tested in batch experiments over 18 days (a) negative control I; (b) negative control II.
The different removal rates of E2 and EE2 and the formation rate of E1, resulting of the first operation mode including the application of the nutrient media diluted 1:100 (see 2.3.1) with a hydraulic retention time of 32 h, are shown in Fig. 3. The results given in Fig. 3a) and c) show the concentration rates of E2 and E1 at sampling day 29, and of EE2 and E1 at sampling day 26, respectively. The results shown in Fig. 3b) and d) reflect mean values calculated among the whole sampling period of ten weeks. E2 is almost completely removed within 8 h. The metabolite E1 is formed rapidly within a short time but not significantly further decomposed. The occurrence of E1 at the inlet of the reactor is probably a result of a certain degree of back mixing from the reactor solution and a biofilm grown in the inlet line. By sampling the sterile filtered spiking solutions of E2 and EE2, the sterile formation of E1 from E2 or E2 was excluded and the activity of grown biofilm in the inlet could be confirmed. Comparing the removal rates of one sampling day to mean values of the whole period of experiment, no change was observed either in formation of the metabolite E1 or in decomposition rate of E2, which was almost removed within 8 h. Using a second biofilm reactor in the same way with analogous nutrient conditions, additional experiments with EE2 investigated the possibility of its removal. Fig. 3c) gives the results of one sampling day, while Fig. 3d) shows the mean
values of EE2 and E1 concentrations calculated over the whole sampling period of ten weeks. Obviously, the concentration of EE2 was eliminated to 67% after 8 h. During the further course of incubation in the reactor, the compound EE2 was removed to 80% within 32 h. The formation of E1 from EE2 is somewhat different to its formation from E2; it was also formed in small amounts but seemed to be decreased after 24 h. The tested biofilm organisms potentially decomposed E1, but intermediates of E1 formation were not detected and a degradation rate is rather ambiguous. The calculated mean values confirm the removal rates of EE2 and the formation of E1. The metabolite E3 was not detected within these experiments because of a lack of its formation or because of its faster degradation. Fig. 4 shows the results of degradation experiments for the two estrogens E2 and EE2 using continuous flow biofilm reactors with more limited nutrient conditions (LSM2 1:100 yet without meat and yeast extract, see 2.3.1) to get better information on formation and decomposition of metabolites. The removal rates of E2 (Fig. 4a)) and EE2 (Fig. 4c)) are similar to those of the first operation mode offering more nutrients; E2 is eliminated completely within a few hours and EE2 is removed to 73% after 32 h. The metabolite E1 is formed from E2 as well as from EE2. Using these limited nutrient conditions, there can be observed a tendency of a further degradation of the metabolite
Fig. 6 e Degradation of E2 and EE2 by isolated bacteria strain A_243 derived from biofilms of Unteres Odertal tested in batch experiments over 18 days (a) A_243 I; (b) A_243 II.
1112
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 0 5 e1 1 1 4
Fig. 7 e Degradation of E2 and EE2 by isolated bacteria strain B_207 derived from biofilms of Unteres Odertal tested in batch experiments over 18 days (a) B_207 I; (b) B_207 II.
E1 in both cases. Regarding the mean values calculated over the whole period of experiment (six weeks), the removal rates of 100% E2 and 70% EE2 could be confirmed (Fig. 4b) and c)). The results presented here using continuous flow biofilm reactors show that the biofilm organisms of national park Unteres Odertal are definitely able to metabolise selected steroid hormones, here 17b-estradiol and 17a-ethinylestradiol, within a few hours. The metabolite estrone was formed from E2 as well as from EE2 in similar concentration levels. Using these biofilm reactors, E1 was not confirmed to be the main metabolite of E2 or of EE2; the possibility of formation and decomposition of E1 within the first 8 h could not have been excluded because of the reactor construction. The metabolite estriol was not detected at all. The results demonstrate a particular degradation potential for organisms from river systems of national park Unteres Odertal which has not previously been shown. After termination of the presented experiments, the biofilms of both reactors were additionally extracted and analysed by GCeMS concerning levels of E2 and EE2 to prove the microbial removal of substances by excluding sorption effects on surfaces of biofilms. No concentrations of E2 or EE2 were detected in the biofilms. Of course there might have been taken place some sorption effects on surfaces of biofilms before the degradation of substances by biofilm organisms, because sorption effects are important factors at the first
stages of microbial removal. However, these effects do not have an impact of conclusions of the studies.
3.3.
Degradation of estrogens by isolated bacterial strains
Using several selected biofilm-derived isolated bacterial strains from the national park Unteres Odertal, the degradation of E2 and EE2 was investigated by performing batch experiments (see 2.3.2). The initial E2 and EE2 concentrations were analogous to conditions in continuous flow biofilm reactors. While Fig. 5 shows the results of a negative control to confirm the test conditions, significant results demonstrating different degradation rates are shown in Figs. 6e9. In Fig. 5, the concentrations of E2 and EE2 are shown over the incubation time of three weeks in the negative controls. The stability of the selected compounds is demonstrated in sterile experimental conditions; therefore degradation in inoculated samples can be attributed to microbial degradation. In the negative controls, small amounts of E1 were formed during sterilisation by autoclave. Consequently, the formation of E1 by bacterial strains was only confirmed by significant higher amounts than in negative controls. Fig. 6 shows the results of batch experiments with bacterial strain A 243 which metabolised the steroid hormone E2 within about 12 days, while the concentration level of the starting compound EE2 remained constant. Both test batches of
Fig. 8 e Degradation of E2 and EE2 by isolated bacteria strain A_223 derived from biofilms of Unteres Odertal tested in batch experiments over 18 days (a) A_223 I; (b) A_223 II.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 0 5 e1 1 1 4
1113
Fig. 9 e Degradation of E2 and EE2 by isolated bacteria strain A_288 derived from biofilms of Unteres Odertal tested in batch experiments over 18 days (a) A_288 I; (b) A_288 II.
bacterial strain A 243 formed E1 in large amounts and decomposed this product further within 18 days. The isolates B 207 (Fig. 7) degraded both E2 and EE2 similarly within 18 days, but the metabolite E1 was formed only at marginal concentration levels. Obviously, the bacterial strain B 207 was able to degrade E1, which might be analogue to the property of EE2-degradation. Metabolism of A 223 (Fig. 8) differed from the degradation pathways shown by incubation of A 243 and B 207. While the removal rate of EE2 was 60% after three weeks in the first sample (Fig. 8a)) and 94% in the second sample (Fig. 8b)), E2 seemed to be hardly metabolised. E1 was only formed in small amounts or degraded faster. In no case was E3 detected. Fig. 9 presents the results of isolate A 288 which showed a completely different metabolism, evidenced by the fastest decomposition of starting compounds E2 and EE2 which were already completely degraded at the first sampling after 6 days. Additionally, neither metabolite E1 nor E3 were detected within the run times of the experiment. This bacterial strain typifies a special nature. It seems to be able to metabolise the steroid hormones E2 and EE2 naturally without adaptation, in contrast to the other tested strains which are also able to metabolise the compounds but require a significant adaptation period. Several studies have reported degradation of natural and synthetic estrogens. Shi et al. (2004) investigated the metabolism of E2, EE2, E1 and E3 by activated sludge and night soilcomposting microorganisms and proved the degradation of the natural hormones E2, E1 and E3 but not the synthetic steroid EE2. This is different to the selected isolates presented here. Vader et al. (2000) observed improved degradation of estrogens within several hours by activated sludge with significant nitrifier capacity, underlining the different conditions required by different microorganisms. In conclusion, five of the 15 tested isolates neither metabolised E2 nor EE2, two of them only decomposed E2 but not EE2. Three tested isolates degraded both substances, and the results of five tested isolates were not clear because of different results in twice incubated samples. The presented results show that the metabolism of E2 and EE2 is different. Microorganisms certainly require different nutrient conditions, but some organisms may not be able to decompose steroids by nature. In comparison to relatively fast degradation rates obtained with the continuous flow biofilm reactor (see 3.2), the degradation using isolates requires several days.
This is primarily a result of the fact that in batch experiments bacteria strains had to grow first after inoculation, whereas continuous flow reactor experiments started with large functioning biofilms.
4.
Conclusions
The present experiments using continuous flow biofilm reactors and batch experiments with isolated bacterial strains demonstrate the degradation potential of the natural steroid hormone 17b-estradiol and the synthetic compound 17a-ethinylestradiol by organism communities and isolates both derived from national park Unteres Odertal. Biofilms are shown to offer high capability to remove E2 and EE2 rapidly under the given experimental conditions, but the formation of the metabolite E1 did not take place in large amounts. Significant sorption effects were not determined using these biofilm reactors and could be excluded by extraction and analysis of biofilms after degradation experiments, respectively. Performing batch experiments with isolated biofilm derived bacteria, the different possibilities and potentials of degradation pathways became evident. In summary of batch experiments it appears that some of the selected isolates naturally derived from national park Unteres Odertal have the capabilities to metabolise E2 as well as EE2, partially decomposed to E1. During wastewater treatment using sewage treatment plants, microbial activity plays a large role in elimination of environmental pollutants, even though a large number of persistent organic contaminants are not eliminated during wastewater treatment. There is incomplete EE2 and E1 biodegradation or removal during wastewater treatment and an occurrence of E1 in surface water (Zuehlke et al., 2005). Furthermore, increasing concern about the fate of 17a-ethinylestradiol in the environment stimulates the search for alternative sewage treatment methods. Additional investigations concerning the efficiency of selected isolates are required to specify their degradation potential. Moreover, there is a definite need for further research on the decomposition of E2 and EE2 by organisms of national park Unteres Odertal to identify the degradation pathways and metabolites using for example LCeQeTOFeMS/MS and LCeIoneTRAPeMSn which are powerful tools to examine complex samples because they
1114
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 0 5 e1 1 1 4
provide important information on the molecular masses and the presence of certain functional groups of the analytes.
Acknowledgements The present research has been conducted as part of the project “Entwicklung eines Indikatorsystems fu¨r Verockerungsprozesse” kindly funded by the German Federal Ministry of Education and Research (project number 02WU0715). The authors would like to thank the project partners especially the working group of Prof. Szewzyk for isolating bacterial strains and Mr. D. Sauter for his engagement in performing his project work. Thanks go also to Mrs. D. Risse and Mr. S. Klemer for their assistance in handling the biofilm reactors and to Mr. R. Hatton for his linguistic improvements of the manuscript.
references
Adler, P., Steger-Hartmann, T., Kalbfus, W., 2001. Distribution of natural and synthetic estrogenic steroid hormones in water samples from southern and middle Germany. Acta Hydrochimica et Hydrobiologica 29 (4), 227e241. Atlas, R.M., 1997. Handbook of Microbiological Media, second ed. CRC Press, Inc., Boca Raton, Florida. Auriol, M., Filali-Meknassi, Y., Tyagi, R.D., Adams, C.D., Surampalli, R.Y., 2006. Endocrine disrupting compounds removal from wastewater, a new challenge. Process Biochemistry (Amsterdam, Netherlands) 41 (3), 525e539. Baronti, C., Curini, R., D’Ascenzo, G., Di Corcia, A., Gentili, A., Samperi, R., 2000. Monitoring natural and synthetic estrogens at activated sludge sewage treatment plants and in a receiving river water. Environmental Science and Technology 34 (24), 5059e5066. Carballa, M., Omil, F., Lema, J.M., Llompart, M., Garcia-Jares, C., Rodriguez, I., Gomez, M., Ternes, T., 2004. Behavior of pharmaceuticals, cosmetics and hormones in a sewage treatment plant. Water Research 38 (12), 2918e2926. DIN 32645, 2008. Chemical Analysisedecision Limit, Detection Limit and Determination Limiteestimation in Case of Repeatability; Terms, Methods, Evaluation. Arbeitsausschuss Chemische Terminologie (AChT) im DIN Deutsches Institut fur Normung e.V, Berlin. Hashimoto, T., Murakami, T., 2009. Removal and degradation characteristics of natural and synthetic estrogens by activated sludge in batch experiments. Water Research 43 (3), 573e582. Heberer, T., 2002. Occurrence, fate, and removal of pharmaceutical residues in the aquatic environment: a review of recent research data. Toxicology Letters 131 (1e2), 5e17. Irwin, L.K., Gray, S., Oberdorster, E., 2001. Vitellogenin induction in painted turtle, Chrysemys picta, as a biomarker of exposure to environmental levels of estradiol. Aquatic Toxicology 55 (1e2), 49e60. Johnson, A.C., Sumpter, J.P., 2001. Removal of endocrinedisrupting chemicals in activated sludge treatment works. Environmental Science and Technology 35 (24), 4697e4703. Khanal, S.K., Xie, B., Thompson, M.L., Sung, S., Ong, S.-K., Van Leeuwen, J., 2006. Fate, transport, and biodegradation of
natural estrogens in the environment and engineered systems. Environmental Science & Technology 40 (21), 6537e6546. Kolodziej, E.P., Harter, T., Sedlak, D.L., 2004. Dairy wastewater, aquaculture, and spawning fish as sources of steroid hormones in the aquatic environment. Environmental Science and Technology 38 (23), 6377e6384. Lee, H.B., Liu, D., 2002. Degradation of 17b-estradiol and its metabolites by sewage bacteria. Water, Air, and Soil Pollution 134 (1e4), 353e368. Lin, Y.-H., Chen, C.-Y., Wang, G.-S., 2007. Analysis of steroid estrogens in water using liquid chromatography/tandem mass spectrometry with chemical derivatizations. Rapid Communications in Mass Spectrometry 21 (13), 1973e1983. Pieper, C., Risse, D., Schmidt, B., Braun, B., Szewzyk, U., Rotard, W., 2010. Investigation of the microbial degradation of phenazone-type drugs and their metabolites by natural biofilms derived from river water using liquid chromatography/tandem mass spectrometry (LC-MS/MS). Water Research 44 (15), 4559e4569. Purdom, C.E., Hardiman, P.A., Bye, V.J., Eno, N.C., Tyler, C.R., Sumpter, J.P., 1994. Estrogenic effects of effluents from sewage treatment works. Chemistry and Ecology 8 (4), 275e285. Schmidt, B., 2008. Physiology and Phylogenity of Iron Oxidising Bacteria Isolated on Pollutants containing Media. (Pysiology und Phylogenie Eisenoxidierender Bakterienisolate auf schadstoffhaltigen Medien). Environmental Microbiology. TU Berlin, Berlin (Diploma). Shareef, A., Parnis, C.J., Angove, M.J., Wells, J.D., Johnson, B.B., 2004. Suitability of N, O-bis(trimethylsilyl)trifluoroacetamide and N-(tert-butyldimethylsilyl)-N-methyltrifluoroacetamide as derivatization reagents for the determination of the estrogens estrone and 17a-ethinylestradiol by gas chromatography-mass spectrometry. Journal of Chromatography, A 1026 (1e2), 295e300. Shi, J.H., Suzuki, Y., Nakai, S., Hosomi, M., 2004. Microbial degradation of estrogen using activated sludge and night soilcomposting microorganisms. Water Science and Technology 50 (8), 153e159. Suzuki, Y., Maruyama, T., 2006. Fate of natural estrogens in batch mixing experiments using municipal sewage and activated sludge. Water Research 40 (5), 1061e1069. Ternes, T.A., Andersen, H., Gilberg, D., Bonerz, M., 2002. Determination of estrogens in sludge and sediments by liquid extraction and GC/MS/MS. Analytical Chemistry 74 (14), 3498e3504. Ternes, T.A., Kreckel, P., Mueller, J., 1999. Behavior and occurrence of estrogens in municipal sewage treatment plants-II, aerobic batch experiments with activated sludge. Science of the Total Environment 225 (1,2), 91e99. Vader, J.S., Van Ginkel, C.G., Sperling, F.M.G.M., De Jong, J., De Boer, W., De Graaf, J.S., Van der Most, M., Stokman, P.G.W., 2000. Degradation of ethinyl estradiol by nitrifying activated sludge. Chemosphere 41 (8), 1239e1243. Zhang, K., Zuo, Y., 2005. Pitfalls and solution for simultaneous determination of estrone and 17a-ethinylestradiol by gas chromatography-mass spectrometry after derivatization with N, O-bis(trimethylsilyl)trifluoroacetamide. Analytica Chimica Acta 554 (1e2), 190e196. Zuehlke, S., Duennbier, U., Heberer, T., 2005. Determination of estrogenic steroids in surface water and wastewater by liquid chromatography - electrospray tandem mass spectrometry. Journal of Separation Science 28 (1), 52e58.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 1 5 e1 1 2 8
Available at www.sciencedirect.com
journal homepage: www.elsevier.com/locate/watres
Correlation of bacterial communities supported by different organic materials with sulfate reduction in metal-rich landfill leachate Jana Schmidtova, Susan A. Baldwin* Chemical and Biological Engineering, University of British Columbia, 2360 East Mall, Vancouver, B.C. V6T 1Z3, Canada
article info
abstract
Article history:
Several different organic materials, typical of those used in passive treatment systems for
Received 24 June 2010
mine influenced water, were tested for their ability to support sulfate-reducing bacteria
Received in revised form
and sulfate reduction in an anaerobic biological reactor (ABR). The quantity of sulfate-
29 October 2010
reducing bacteria (SRB) in each organic material, as determined using quantitative poly-
Accepted 31 October 2010
merase chain reaction (q-PCR) of the dissimilatory sulfite reductase (dsr) gene, correlated
Available online 18 November 2010
with the initial C/N ratio of each material. Potential sulfate reduction rates measured in the laboratory ranked silage > compost ¼ molasses/hay > cattails > pulp mill biosolids and
Keywords:
correlated with the q-PCR estimates of SRB in the submerged materials. A comparison of
Mine influenced water
bacterial communities using 16S rRNA gene clone library sequencing revealed similar
Passive treatment
distribution of clones among the phyla Bacteroidetes, Firmicutes and Proteobacteria for silage,
Natural organic substrate
compost and molasses/hay after 174 days of exposure in the seepage water. Silage, the
Sulfate-reducing bacteria
most successful material tested, contained more d-Proteobacteria-related sequences than
Dissimilatory sulfite reductase
the other materials and Spirochaetes-related clones were more abundant in silage than in
16S rRNA gene clone library
compost or molasses/hay. According to sequenced dsr clones, the SRB community in silage
Microbial community
differed from that for compost and molasses/hay, with fewer Desulfovibrio- and more Desulfomicrobium-related sequences in the silage. Pulp mill biosolids used in the ABR since 2004 contained an overall bacterial community that was more diverse than those for the freshly submerged organics, but only Desulfovibrio desulfuricans-related sequences were found in the dsr library. ª 2010 Elsevier Ltd. All rights reserved.
1.
Introduction
Mine influenced water is the most common pollution problem related to mining. During and after mining, rocks with sulfide minerals are exposed to air and water causing their oxidization. This generates seepage containing high concentrations of sulfate and dissolved metals (INAP, 2009). In addition, legacy technologies, such as roasting, generated large quantities of dust containing metal (e.g. arsenic), which was landfilled
since it has no economic value. Seepage from such mine wastes poses a threat to aquatic life in receiving environments and treatment to remove the toxic components is required. The conventional approach to treating mine effluents uses chemical reagents for neutralization and precipitation; the highdensity sludge (HDS) process with lime addition being the current industry standard (INAP, 2009). However, the HDS process may not be economically feasible at remote and inaccessible sites or where long-term treatment is necessary
* Corresponding author. Tel.: þ1 604 822 1973; fax: þ1 604 822 6003. E-mail address:
[email protected] (S.A. Baldwin). 0043-1354/$ e see front matter ª 2010 Elsevier Ltd. All rights reserved. doi:10.1016/j.watres.2010.10.038
1116
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 1 5 e1 1 2 8
(Johnson and Hallberg, 2005a). As well, safe storage of the metal-laden sludge is a major challenge. Alternatively, passive bioremediation systems, such as constructed anaerobic wetlands and permeable reactive barriers, are less expensive since they have low construction and operating costs. They rely on natural processes such as sulfate reduction by sulfatereducing bacteria (SRB) to raise the pH and generate sulfide, which causes metals to precipitate (Eccles, 1999). However, although bioremediation can remove metals down to very low concentrations, it is not always reliable or sustainable as some passive treatment systems operate only for very short periods of time before failing (Neculita et al., 2007). This is because the mechanisms responsible for metal removal have not been well characterized. Bacteria are deemed to play an important role in treatment but their presence and activity are measured rarely (Dann et al., 2009). Therefore, knowledge about the dynamics and diversity of microbial consortia and the rates of organic material degradation are areas that need to be addressed so as to assess the sustainability of these systems. In passive treatment, a complex organic material provides nutrients for bacteria that are responsible for sulfate reduction and metal removal, such as SRB. To minimize costs, waste organics close to the mine site are used, such as wood chips and sawdust (Johnson and Hallberg, 2005b) (Blumenstein and Gusek, 2008), manure (Cocos et al., 2002; Gibert et al., 2004; Zagury et al., 2006), agricultural byproducts such as hay and alfalfa (Bechard et al., 1994), composted food waste or natural vegetation (Kelman Wieder, 1993) (Smith and Kalin, 1991), or industrial wastes such as pulp mill biosolids (Duncan et al., 2004) (Hulshof et al., 2006). The consensus of most laboratory- and pilot-scale studies to date is that a mixture of different materials is more effective than one single type (Waybrant et al., 1998) (Brown, 2007) (Zagury et al., 2006). However, it is not known why some complex organic materials are better at supporting sulfate reduction than others. Because SRB metabolize only certain low molecular weight carbon compounds that are generally not present in complex organic wastes, they rely on other microbes, including hydrolytic, acidogenic and acetogenic bacteria, to supply the electron donors. Therefore, often the bottleneck and rate limiting step of sulfate reduction in passive anaerobic bioreactors (ABRs) for mine drainage treatment is the decomposition of complex organics (Waybrant et al., 1998; Castro et al., 1999; Gibert et al., 2004). In this study, several different organic materials, typical of those used in mine passive treatment systems, were suspended in the plume of metal rich (As, Zn, Cd) effluent flowing through a constructed anaerobic biological reactor (ABR) in Trail, British Columbia, Canada. The goal was to find out if the organic materials differ in their ability to support sulfatereducing bacteria and sulfate reduction and to see if there is a correlation with the overall bacterial communities supported by the materials. The microbial community structures of total bacteria and SRB were assessed using 16S rRNA and dsrA genes as molecular markers, respectively. Another goal of our project was to demonstrate the usefulness of quantitative polymerase chain reaction (q-PCR) for the dsrA gene for monitoring of SRB in the field and as a proxy for in situ sulfate reduction. Characteristics of each organic material were measured so as to explore any relationships between the type of organic material, potential sulfate reduction rate and the bacterial community.
2.
Materials and methods
2.1.
Characteristics of the study site
A treatment system near Trail, British Columbia, Canada was built by Nature Works Remediation Corporation (http://natureworks.net/) to treat leachate from a historic landfill in the proximity of the Teck zinc and lead smelter. The first two steps in a series of constructed wetlands are sub-surface, vertical flow cells called anaerobic biological reactors (ABRs) filled with a pulp mill biosolids mix (60% kraft pulp mill biosolids, 35% sand and 5% cow manure) and limestone. At the time of this study, the constructed wetland had been treating the landfill seepage, which contained arsenic, zinc, cadmium and sulfate in elevated concentrations, for 5 years. During the study period, total and dissolved As entering the first anaerobic cell varied from 9.8 to 48 mg L-1 and 0.66 to 27 mg L-1, respectively. The highest influent concentrations were in late April and, assuming a one-month hydraulic retention time for the first ABR, 27% of total and 51% of dissolved As were removed. Similarly, 49% and 31% of total and dissolved Zn, respectively, were retained in the first ABR for the same period. Zinc concentrations in the influent varied between 45 and 83 mg L-1 over the whole study period. Cadmium concentrations also decreased, but dissolved Fe increased due to the reducing environment of the ABRs. Sulfate, which varied between 520 and 1300 mg L-1 in the influent, remained unchanged through the treatment system or appeared to increase. Temperature of the pore water inside the ABR piezometer where the materials were suspended was around 6.5 C, 17 C and 8 C in April, July and October, respectively. Typically, some dissolved oxygen was present in the spring months (i.e. 1.5 mg L-1 in April) and decreased to less than 0.3 mg L-1 in the summer and fall months accompanied by negative redox potential of 172 to 180 mV. The pH of the piezometer water varied between 5.9 and 6.8 during the study period.
2.2.
Experimental set-up
Each of the ABRs contained a piezometer in the centre. Organic materials tested in this study were suspended within the aqueous plume flowing through the first ABR approximately 2 m below the water surface in the piezometer. The following materials were each sealed in duplicate screen mesh bags (5 7 cm, ca. 1 mm mesh size): 13 g of alfalfa silage (Poundmaker Agriventures, Lanigan, SK); 7 g of a mixture of fresh and partially decomposed cattails (taken from the Typha latifolia pond); 7 g of vegetable and woody debris compost (University of British Columbia, Vancouver, BC); 8 g of a dried sugar beet pulp molasses (sweet 45, Westway Feed Products, Tomball, TX) and hay (mixed crop of alfalfa and orchid grass 65:35) mixture (2:1 w/w); 12 g of kraft pulp mill biosolids (Celgar Pulp and Paper Mill, Castlegar, British Columbia). All materials were obtained fresh from source, homogenized and cut to ca. 0.5 cm3 pieces. All 10 bags were submerged on May 3, 2006 (time ¼ 0). The first set was removed on August 19, 2006 (time ¼ 109 days) and the second set was taken out on October 23, 2006 (time ¼ 174 days). All bags were immediately placed on ice and kept frozen until chemical analysis. In addition, a sample from the anaerobic
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 1 5 e1 1 2 8
bioreactor was taken with a PVC corer (0.5 m in length, 10 cm in diameter) from the upper-layer of the bioreactor and kept frozen until DNA extraction.
2.2.1.
Chemical analysis of organic materials
The following parameters were measured before and after the in situ exposure. Dissolved organic carbon (DOC) was measured using TOC-Vcph analyzer (Shimadzu, Columbia, MD). 4 g of wet material from each mesh bag was washed with 30 mL of deionized water in a 50 mL Falcon tube shaken at 250 rpm for 2 h, followed by centrifugation at 8000 rpm for 10 min and analysis of the syringe-filtered (0.22 mm) supernatant. The washed pellet was dried at 60 C overnight and used for particulate organic carbon/particulate nitrogen (POC/PN) and easily degradable material (EDM) analysis. POC and PN were measured using the method by Verardo et al. (1990). EDM was analyzed by modified gravimetric forage fibre analysis as described in Prasad et al. (1999). In order to estimate the experimental error associated with the chemical analyses, some samples were analyzed in triplicate. For the DOC measurements the standard deviations were less than 5% of the average values. For the EDM measurements, the standard deviations were less than 6%, and for POC and PN, they were less than 2.5% and 4%, respectively, of the average values.
2.3.
DNA extraction
Genomic DNA was extracted from previously homogenized and thawed materials removed from their mesh bags using the MoBio PowerSoil DNA extraction kit (MoBio Laboratories, Solana Beach, CA) according to the manufacturer’s instructions with the following modifications: alternative protocol for maximum yields was used; the spin column was rinsed twice with 300 mL of solution C4; and finally DNA was eluted in 100 mL of 10 mM Tris. Total nucleic acid concentration and purity were measured spectrophotometrically with NanoDrop ND-1000 UVeVis Spectrophotometer (NanoDrop Technologies, Wilmington, DE) at 260 and 280 nm.
2.4.
PCR and quantitative PCR (q-PCR)
DNA was extracted from the organics contained in the mesh bags at time 0, and after 109 and 174 days of exposure in the ABR water. The DNA was subjected to PCR for small subunit (SSU) ribosomal DNA gene fragments targeting different SRB groups and q-PCR for targeting the dsr gene. Based on the multiple alignments of dsrA genes from both cultured SRB and environmental sequences found in GenBank, conserved regions of the gene were selected as primers for SRB quantification. The forward primer DSR1F0 (50 -ACSCACTGGAAGCACGGC-30 ) was modified from previously published primer DSR1F (Wagner et al., 1998). A degenerate reverse primer DSR210R (50 -CGGTGGMRCCRTGCATRTT-30 ) was designed to match the majority of dsr sequences currently available and yield a target product of ca. 200 bp (Schmidtova et al., 2009). The primers were tested by amplification of several pure SRB strains: Desulfobacterium autotrophicum (DSM 3382), Desulfobacter curvatus (DSM 3379), Desulfosarcina variabilis
1117
(DSM 2060), and Desulfovibrio desulfuricans subsp. desulfuricans (DSM 1926). Total eubacterial primers used were 27F (Lane, 1991) and degenerate 519R (50 -GNTTTACCGCGGCKGCTG-30 ). q-PCR of SRB was performed on the ABI PRISM 7000 (Applied Biosystems) real-time thermocycler. The reaction mixture (12 mL) contained iTaq SYBR Green Supermix with ROX (Biorad), each primer at a final concentration 300 nM, nanopure water and template DNA. MicroAmp 96-well reaction plates (Applied Biosystems) were used. The amplification conditions were as follows: 2 min at 50 C; 10 min at 95 C; and 40 cycles of 15 s at 94 C followed by 1 min at 60 C. Each sample was amplified in triplicate. For some samples the reaction was repeated, yielding up to 6 analytical replicates. The external standard curve for dsr quantification was constructed with genomic DNA extracted from a pure culture of Desulfobacterium autotrophicum (DSM 3382). The detection limit was 100 dsr copies per reaction, the efficiency (E ¼ 10(1/ slope) , where 2 indicates an exact doubling per cycle) was 1.84 and R2 ¼ 0.96. Concentrations of the samples were extrapolated from the standard curve using ABI Prism 7000 SDS Software (Version 1.0, Applied Biosystems). q-PCR of total eubacteria was performed on the Miniopticon system (Biorad, Hercules, CA). The reaction mixture (25 mL) contained iTaq SYBR Green Supermix (Biorad), each primer at a final concentration 300 nM, nanopure water and template DNA. The amplification conditions were as follows: 2 min at 50 C; 10 min at 95 C; and 40 cycles of 15 s at 94 C followed by 1 min at 60 C. The external standard curve was constructed as described by Zaikova et al. (2009). The gene copy number was diluted from 100 to 108 copies.
2.5.
Clone library construction
Clone libraries of 16S rRNA and dsr genes were constructed from 4 of the organic materials: silage, compost, molasses and hay taken from the reactor after 174 d exposure, and pulp mill biosolids taken directly from the ABR. PCR amplification of 16S rRNA genes was carried out on an iCycler (Biorad) using universal bacterial primers 27F and 1492R (Lane, 1991). Taq DNA polymerase (Invitrogen) was used and the following reaction conditions were applied: 1 cycle at 94 C for 3 min; 35 cycles at 94 C for 40 s, 55 C for 1.5 min, 72 C for 2 min; 1 cycle at 72 C for 10 min. PCR amplification of dsr genes was carried out using primers DSR1F and DSR4R (Wagner et al., 1998). The same conditions applied except for the melting temperature, which was 60 C in this case. Products were further purified using the QIAquick PCR purification kit (Qiagen) according to the manufacturer’s instructions. Purified PCR products were ligated into the pCR2.1-TOPO vector as described in the protocol of TOPO TA Cloning kit (Invitrogen, Carlsbad, CA). Ligation reaction mixtures were transformed into One Shot TOP10 competent Escherichia coli cells (Invitrogen). Transformants were selected by blue and white screening. 288 white colonies were randomly selected from each sample for the SSU rRNA library and 196 white colonies were randomly selected from each sample for the dsr library, and stored in a glycerol stock solution in 96-well culture plates at 80 C. Plasmid inserts from several colonies stored in glycerol stock were checked by direct PCR using standard M13F and M13R primers and confirmed with agarose electrophoresis.
1118
2.6.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 1 5 e1 1 2 8
Sequencing and phylogenetic analysis
Clones were purified with QIAquick PCR purification kit and sequenced bidirectionally by the Michael Smith Genome Sciences Centre (Vancouver, Canada, www.bcgsc.ca) using M13F and M13R primers. Assembled and trimmed sequences of 16S rRNA inserts (Sequencher; Gene Codes, Ann Arbor, MI) were imported and aligned with the ARB phylogeny computer program (Ludwig et al., 2004). All sequences were checked for chimeras with the Ribosomal Database Project II chimera check program (Cole et al., 2003). Sequences with higher than 97% similarity were combined into single OTUs using DNADIST from PHYLIP version 3.68 (Felsenstein, 2005) and DOTUR (Schloss and Handelsman, 2005). The closest phylogenetic neighbors were found using BLAST searches on the NCBI database. The phylogenetic trees and the bootstrap analyses (100 replicates) were constructed with the PhyML software package (Guindon and Gascuel, 2003) by using the maximum likelihood method. Good’s coverage was calculated by using the following formula: C ¼ (1 (n1/N )) 100, where n1 is the number of clones that occurred only once in the clone library and N is the total number of clones analyzed. Chao1 was calculated using DOTUR. The final phylogenetic trees were constructed with selected closest relatives and additional cultured species. Comparison of libraries and cluster diagram was constructed with UniFrac (Lozupone et al., 2006).
2.7.
Sulfate reduction rate
Potential sulfate reduction rate (SRR) in the ABR pore water by amending with each of the five organic materials was determined in laboratory-scale batch reactors, as this could not be measured in the field. Duplicate 150 mL glass bottles containing: 10 g of silage or 15 g of pulp mill biosolids or 5 g of molasses þ 2.5 g of hay or 6 g of fresh and partially decomposed cattails, plus a control bottle without any material were set up. 140 mL of N2-purged water taken from within the ABR piezometer, 5 mL of mixed culture laboratory SRB inoculum previously enriched in Postgate B medium from sulfate-rich sediment (Lac DuBois (Brown, 2007)), and 1 mL of sodium thioglycolic acid were added and pH was adjusted to pH 7.5e8. The bottles were kept in the dark at room temperature and sulfate was measured using the barium chloride precipitation method (Clesceri
et al., 1998) at times 0, 4, 8, 12, 15, 22 days. The SRR was determined from the slope of the linear portion of the sulfate concentration versus time plots and reported as the average from duplicate reactors.
3.
Results
The focus of our study was to compare different types of organic material in terms of their ability to support SRB under the same in situ conditions using the aqueous environment of the first Trail ABR. This provided a more realistic continuous flow system compared with static tests in the laboratory.
3.1.
Chemical characteristics of the organic materials
Organic materials vary in terms of their biodegradability depending on their content of dissolved organic compounds, labile and recalcitrant solid portions as well as presence of inhibiting substances. Several tests were performed to compare the organic materials and to monitor their utilization over time (Table 1). As expected, the molasses and hay mixture contained the highest amount of dissolved organic carbon (DOC) initially as well as the most easily degradable material (EDM). The molasses used in this experiment contained a minimum of 45% of soluble sucrose, as defined by the manufacturer. Significant DOC levels were found also in compost and silage. The lowest initial EDM of 20.8%, indicating the highest amount of complex cellulosic and lignin compounds, was found in the compost. The C/N ratios in the starting materials ranged from 25.4 (cattails and pulp mill biosolids) to 52.5 (silage). The DOC disappeared quickly for all materials, as expected. The silage contained the highest amount of soluble carbon after 109 days, but, like all the other materials, little DOC remained after 174 days. The EDM of the insoluble fraction was consumed more slowly. For the biosolids and compost, the decrease was linear (R2 > 0.99), whereas for the molasses and hay mixture, with the highest initial EDM, the decrease was more rapid in the first 109 days. Interestingly, silage EDM was consumed more rapidly in the later period from 109 to 174 days. The smallest change in EDM occurred in cattails with almost no decomposition after 109 days. The amount of particulate organic carbon (POC) and nitrogen (PN) remained relatively unchanged with
Table 1 e Carbon characteristics of organic substrates before and after treatment. DOC (mg g1)a Substrate/time (days) Pulp mill biosolids Silage Cattails Vegetable compost Molasses and hay
0 19.3 86.4 16.3 111.1 725.6
109 10.3 23.4 12.7 7.8 16.8
174 7.9 6.5 3.0 2.2 4.6
POC (% w/w) 0 41.8 42.7 24.3 45.0 42.0
109 50.1 37.1 32.4 44.6 44.7
174 45.4 45.1 23.3 45.6 45.4
PN (% w/w) 0 1.9 0.9 1.1 1.3 1.6
109 2.0 2.0 2.1 1.0 1.3
174 1.9 1.2 1.3 0.9 0.7
EDM (% w/w) 0 36.8 45.8 37.6 20.8 47.7
109 28.8 40.7 32.0 15.8 26.1
C/N (molar) 174 25.5 29.9 31.8 13.6 24.0
0 25.4 52.5 25.4 41.2 31.1
109 29.3 21.6 18.2 50.9 38.8
174 28.4 44.3 21.5 60.9 71.9
DOC stands for dissolved organic carbon; POC stands for particulate organic carbon; PN stands for particulate nitrogen; EDM stands for easily degradable material; C/N stands for carbon/nitrogen ratio. a Measured on leachates as described in Materials and methods.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 1 5 e1 1 2 8
the exception of molasses, where the PN dropped from 1.6% to 0.7%. The C/N of both plant-derived materials (cattails and silage) decreased by ca. 15%. The remaining materials’ C/N ratios increased by 11% (pulp biosolids), 48% (compost) and 131% (molasses and hay).
3.2.
Quantification of SRB and total bacteria
Although the biosolids underwent some degradation, as shown by the decrease in EDM, no SRB were detected using our q-PCR primers for the dsr gene at any time. Therefore, biosolids were excluded from any further analysis. For the other materials, we did not detect any SRB initially before submerging them in the ABR water. However, we found that other bacteria were present at the start of the experiment in amounts from 2.5 106 copies g1 dry weight in the compost to 5.5 108 copies g1 dry weight in silage (Fig. 1(a)). After exposure, the amount of
1119
bacteria increased in all materials. Significant numbers of SRB (3.2e7.1 106 copies g1 dry weight) were found in all four materials after 109 days of incubation in the ABR, and this amount further increased by more than 10-fold during the remaining exposure time (Fig. 1(b)). At the end of the incubation period, silage contained the most SRB (1.1 109 dsr copies g1 dry weight). The highest amount of total bacteria (9.3 109 copies g1 dry weight) after the incubation period was found also in silage. Assuming that there is only one dsr copy per sulfate-reducing bacterium (Kondo et al., 2004) the fraction of SRB in the total bacteria population can be estimated. In August, less than 1% of the total bacteria population comprised SRB. Whereas, by October, SRB as a fraction of the total community had increased to 11.7 1.7% in silage, followed by compost (8.2 2.0%), and molasses and hay mix (7.1 1.6%) (Fig. 1(c)). The cattails contained the lowest amount and fraction of SRB. To compare the above results with the microbes supported on the biosolids inside the ABR, a core taken from within the actual wetland was analyzed as well. We found an average value for total bacteria and SRB of 6.06 108 copies of 16S rRNA g1 dry weight and 6.46 106 dsr copies g1 dry weight, respectively. According to these results, SRB comprised only 1% of the total bacterial community in the ABR biosolids sample.
3.3.
Sulfate reduction rates
Potential sulfate reduction rates were determined during a 22 day batch reactor study. For most organic materials there was a lag period of about 4 days, after which the sulfate concentration decreased linearly with respect to time until day 15 or 22, depending on the material. No lag period was observed when the molasses and hay mixture was used for sulfate reduction. Potential sulfate reduction rates were determined from the linear portions of the concentration versus time plots (Fig. 2). The reactors with silage as a carbon source reduced 1 d1. Approximately four times less 550 3 nmol SO2 4 mL sulfate was reduced in reactors with the molasses/hay mL1 d1) and compost mixture (142 18 nmol SO2 4 1 1 mL d ). The cattails achieved the next (133 59 nmol SO2 4 1 1 d . lowest sulfate reduction rate of 56 16 nmol SO2 4 mL Concentration versus time data for biosolids were a poor fit for a linear regression (R2 < 0.9) and therefore we assumed that there was no significant reduction of sulfate over the duration of the experiment for this material. Since cattails and biosolids performed poorly in the SRR experiments and supported only low numbers of SRB when they were submerged in the ABR, they were excluded in the phylogenetic analysis, the purpose of which was to characterize microbial community structure in organics successful at supporting sulfate reduction. Fig. 1 e (a) Total bacteria, (b) sulfate-reducing bacteria numbers per gram dry weight of solids and (c) the ratio of sulfate-reducing bacteria to total bacteria at three time points during exposure of the organics to ABR water in situ. The same measurements in the core removed from the ABR are shown as asterisks to the right of the plots (*). Error bars represent standard deviation of 3 or more analytical replicates.
3.4.
Bacterial community structure
To explore the bacterial communities associated with degradation of those materials most successful at supporting SRB and sulfate reduction, 16S rRNA clone libraries were sequenced and a phylogenetic analysis performed. Samples of silage, compost, and molasses with hay after 174 d in situ exposure as well as the core taken directly from the ABR (ABR pulp mill biosolids
1120
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 1 5 e1 1 2 8
TR27_R_4, in the silage, compost and molasses/hay libraries (Fig. 4). The second most abundant phylum was Firmicutes with Clostridia related clones being prominent (25%), followed by another cluster of OTUs (TR29_R_230 related) unique to our library with closely related neighbors from the phyla Fibrobacteres and candidate division TG3. Of the Proteobacteria, most sequences fell within the d-Proteobacteria class, except in the ABR biosolids, and Spirochaetes rel. clones were present mostly in the silage and ABR biosolids libraries. All OTUs and their closest relatives, together with the frequency in each library are presented in the Supplementary material (Table S1) as are phylogenetic trees constructed with representative OTUs and a selection of closely related environmental and cultured clones (Fig. S1(a)e(c)). The calculated distances between clone libraries of different materials are outlined in a cluster diagram produced with the software program UniFrac (Lozupone et al., 2006) (Fig. S2). Overall, the sequences found in our libraries were most closely related (>97%) to clones from anaerobic digesters (Riviere et al., 2009), contaminated environments (Brodie et al., 2006, Grabowski et al., 2005) and iron-reducing enrichments (Holmes et al., 2007) (Figs. S1(a)e(c), Table S1). The bacterial diversity associated with different materials is described below.
Sulfate concentration (mg/L)
1200 1000 800 600 400 Silage Molasses Compost
200 0
0
5
10 Time (days)
15
20
Sulfate concentration (mg/L)
750 700 650 600
3.4.1.
550 Biosolids Typha leaf litter 500
4
6
8
10
12
14
16
18
20
22
Time (days)
Fig. 2 e Sulfate concentrations (mg L-1) versus time (d) measured in the laboratory bioreactors incubated with organic materials and ABR water. Linear regressions were performed with Microsoft Excel 2008. The error bars represent the standard deviation of triplicate measurements of sulfate.
sample) were analyzed. A total of 816 clones were chosen and sequenced for 16S rRNA analysis. To avoid microdiversity, clones that were 97% identical were grouped into operational taxonomic units (OTUs), yielding 366 OTUs. Good’s coverage estimating the fraction of the total bacterial community that has been targeted suggests that the ABR pulp mill biosolids contained the most diverse bacterial community of which ca. 51% was covered by the clone library. The remaining samples’ coverage values were between 64 and 68% (Table 2). Over 50% of all 16S rRNA clones belonged to the phylum Bacteroidetes (52%) (Fig. 3) with a significant cluster of one OTU,
Silage
The dominant Bacteroidetes OTU TR27_R_4 related cluster, represented by 130 out of 211 clones (61.6%) was most closely related (96% identity) to an unclassified environmental sequence GW-32 obtained from a household biogas digester (Fig. S1(a), Table S1). Other close relatives, although with lower identity (94%), were classified taxonomically as Cytophaga sp. related and they were found in a “paper pulp column” (Fig. S1 (a)). Within the same cluster, eleven clones in a TR27_R_1 related group were unique to silage and similar (98%) to an unclassified sequence from the Cholet municipal wastewater anaerobic sludge treatment digester in France (Riviere et al., 2009). The closest cultured species, although very distantly related, to the TR27_R_4 and TR27_R_1 groups include a Cytophaga sp. strain AN-BI4 (AM157648, 91% identity) from the interface between Bannock Basin hypersaline brine and seawater in the Mediterranean (Daffonchio et al., 2006) and Prolixibacter bellariivorans (89%) (Holmes et al., 2007). Three small clusters from our library, one of which was unique to silage, were similar to sequences from a biodegraded oil reservoir (Grabowski et al., 2005), a chromium contaminated landfill and a uranium contaminated aquifer. All of these were grouped within Prolixibacter rel. sequences. Another group of TR29_R_302 rel. clones classified under the WCHB1-32 environmental group, named after a clone from a hydrocarbon and chlorinated solvent contaminated aquifer, was placed
Table 2 e Parameters of SSU rRNA clone libraries.
Number of clones Number of OTUs Good’s coverage (%) Chao1a
Silage
Compost
Molasses þ hay
ABR biosolids
211 104 64 243 (172e379)
179 86 64 244 (163e409)
246 97 68 361 (226e634)
180 121 51 276 (205e406)
a Values in brackets represent 95% confidence interval.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 1 5 e1 1 2 8
1121
Fig. 3 e Overall distribution of clones among phyla and Proteobacteria classes for the three materials subjected to SSU rDNA analysis. Pie chart wedges represent percentage of sequences in each group.
putatively in the Cytophagales division (Dojka et al., 1998). Taken together, the Prolixibacter, WCHB1-32 and TR27_R_4 clusters were the most prominent of all Bacteroidetes sequences found in silage. Most other Bacteroidetes OTUs were distributed among unclassified environmental groups frequently related to sequences from iron-reducing enrichments, hydrocarbon polluted environments and anaerobic digesters. The Firmicutes; Clostridia related (Fig. 4) clones were distributed across many different families (Fig. S1(b)) with only a few small clusters of note closely related to clones from anaerobic digesters (Godon et al., 1997), cultured species and clones from the gut-related Ruminococcaceae family, clones from uranium-contaminated soil (Brodie et al., 2006) and the cultured species Sporobacter termitidis. The d-Proteobacteria, were represented with 13 clones containing putative SRB related to Desulfovibrio, Desulfomicrobium and Desulfobacter sp. Eleven silage clones were Spirochaetes related (5.2%) five of which were affiliated with a clone from a SRB fluidized-bed reactor treating ARD and fed by ethanol (Kaksonen et al., 2004).
3.4.2.
Compost
The composition of main phyla in this library was similar to silage with Bacteroidetes and Firmicutes dominant and comprising 55% and 20% of all clones, respectively. Some Bacteroidetes clones were unique to the compost library (red OTUs in Fig. S1(a)), but in general these clustered together with clones from the other libraries. One noticeable difference was the presence of more Sphingobacteriales in the compost library compared with the others (Fig. 4). The distribution of Proteobacteria in the compost library differed from that in silage in
that there were fewer d-Proteobacteria. Nevertheless, these fell within the same families of SRB as the silage clones. Far fewer Spirochaetes and the presence of a large cluster of 20 Fibrobacteres related clones (Hongoh et al., 2006) that formed 10.6% of all compost sequences were the features that most distinguished the compost clone library from that for silage.
3.4.3.
Molasses and hay
Unique to the molasses and hay library was a small cluster of Paludibacter related clones (Fig. S1(a)), closely related to the propionate producing fermenter Paludibacter propionicigenes (Ueki et al., 2006). As in the other two libraries, only a few Proteobacteria were found and most of them were SRB related d-Proteobacteria. Also unique to the molasses and hay clone library were sequences related to clones within the phyla Cyanobacteria and Chlorobi from an acid-impacted lake and contaminated sediment (Percent et al., 2008) (Abulencia et al., 2006) suggesting that some light penetrated to the depths where these organics were submerged. Together with the compost 16S rRNA library, this library also contained a significant amount of the novel OTU TR29_R_230 Fibrobacteres related sequences (7.7%).
3.4.4.
ABR pulp mill biosolids
The ABR microbial community was very different from the others (Fig. S2). Bacteroidetes related sequences were not dominant (Fig. 3), and although some TR27_R_4 related clones were detected, a different cluster of unclassified Bacteriodales (TR8_R_676 related) was prevalent in the ABR biosolids (Fig. 4). This group of 20 clones is not shown on the phylogenetic tree in Fig. S1(a) since there were no closely related sequences in the database and these OTUs could not be classified in any family or existing environmental group. Instead, Clostridia
1122
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 1 5 e1 1 2 8
Fig. 4 e Dotplot representation of bacterial diversity in different carbon materials based on phylogenetic proximity to relevant reference groups and environmental sequences. The area of closed circles determines the percentage of clones falling within certain group.
dominated the ABR biosolids library comprising 40% of all clones. Also in contrast to the other libraries, Firmicutes were more diverse containing also sequences related to Bacillales (6 sequences) as well as Mollicutes (7 sequences) orders. Like the TR8_R_676 cluster, these sequences could not be classified into any families or environmental groups due to their low homology to the existing database sequences. As far as the
Proteobacteria were concerned, ABR biosolids contained more a-Proteobacteria than any of the other libraries (Fig. S1(c)). No d-Proteobacteria were recovered in the clone library probably due to the low numbers of SRB in the biosolids sample as revealed in the dsr q-PCR analysis. Like silage, ABR biosolids contained a cluster of Spirochaetes and some TR29_R_230 Fibrobacteres related clones were present (Fig. 4).
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 1 5 e1 1 2 8
3.5.
Phylogenetic analysis of SRB
Microbes involved in hydrolysis and acidogenic processes associated with carbon compound decomposition dominate the 16S rRNA libraries. Although the d-Proteobacteria sequences that we found confirmed the presence of SRB, they formed a very small fraction of the whole community and thus the 16S rDNA library was not adequate to survey the diversity of SRB in our samples. Therefore, clone libraries of the dsr gene, specific for SRB, were constructed. A total of 78, 68, 74, and 121 clones were sequenced from silage, compost, molasses and hay, and ABR pulp mill biosolids, respectively. These sequences were grouped into 39 OTUs based on 97% sequence similarity. The distribution and phylogenetic relatives of sequenced clones are shown in Fig. S3(a)e(c) and Table S2. The majority of SRB in the samples are affiliated with Desulfovibrio, Desulfonema, Desulfomicrobium and Desulfotomaculum sp. (Fig. 5). An additional six SRB families were detected, although with fewer dsr clones. Compost and molasses/hay were most similar in the SRB related families detected and they contained mostly Desulfovibrio followed by Desulfonema related dsr sequences. In contrast, Desulfovibrio related clones made up only a small portion of the silage dsr library, which contained an equal amount of Desulfonema and Desulfomicrobium related dsr clones as the most represented SRB families. The fresh organics supported a diverse community of SRB, whereas only Desulfovibrio related dsr clones were found in the ABR biosolids sample. Over 92% of all sequences in the biosolids library, represented by clones TR8A_213 and TR8A_214, were closely related (98%) to a single SRB Desulfovibrio sp. related sequence (NTUA-1A-DSR3) from an up-flow fixed-bed reactor fed with lactate (Remoundaki et al., 2008) (Fig. S3(b)). Interestingly, this environmental clone appeared solely at the bottom of the reactor, where conditions were
molasses/hay
compost
silage
Desulfonema Desulfomicrobium Desulfotomaculum Desulfobulbus Desulfobacter Desulfobacterium Desulfatibacillus Desulforhopalus Desulfoarculuo Desulfovibrio
ABR biosolids
Fig. 5 e Cluster diagram of sulfate-reducing bacteria families identified using dsr clone library analysis in the organic materials. Percentage of clones in each family is proportional to green intensity. (For interpretation of the references to colour in this figure legend, the reader is referred to the web version of this article.)
1123
highly reducing. The cultured species most closely related to TR_8A_213 and TR_8A_214 is Desulfovibrio desulfuricans strain F28-1 (97% identity). A cluster of clones also closely related to this strain was prevalent in heavy metal contaminated sediments in a mining area of Portugal suggesting that it may have a particular resistance to high concentrations of Fe, Cu and Zn (Martins et al., 2009). The Desulfovibrio sp. in the compost and molasses/hay dsr libraries (with OTU TR29_99 containing the most clones) were related to another clone NTUA-5A-DSR22 recovered from the same SRB fixed-bed reactor and a different cultured Desulfovibrio species; D. aminophilus (Fig. S3(b)). This SRB species is capable of growing on amino acids as electron donors. Desulfonema related sequences represented 24% of all dsr clones in silage, 14.7% clones in compost, and 20.3% in molasses and hay (Fig. S3(c) and Fig. 5). The only SRB family that was more prevalent in the silage dsr library than the others was Desulfomicrobium, with OTU TR27_51 represented by the most clones.
4.
Discussion
4.1.
Overall performance of the different materials
According to the SRRs measured in the laboratory bioreactors, the materials ranked silage > molasses/hay ¼ compost > cattails > pulp mill biosolids. In terms of estimated percent SRB of the total bacterial community in the submerged samples after 174 days (Fig. 1) the ranking was the same. This indicates that q-PCR of the dsr gene is a good proxy for estimating the importance of sulfate reduction. To understand why these materials ranked as they did, first we explored whether there were any correlations between SRR or SRB numbers and bulk properties of the materials. Factors that we expected to influence the growth of SRB included the availability and type of low molecular weight carbon compounds that would be present in the DOC fraction, the amount and decomposition rate of the more labile of the insoluble components and the overall carbon content. Overall, we did find that the materials with high initial DOC (silage, compost, and molasses/hay) were most successful at supporting SRB. But there was no statistical trend since although the molasses/ hay mixture had more than eight times as much DOC than silage; the SRR using the latter was almost four times greater. The dissolved organic carbon fraction contained many different chemical compounds that differed between silage and the molasses and hay mixture. Silage contained more short chain fatty acids than molasses and hay (data not shown). Silage is produced through lactic acid fermentation of agricultural plants as a way of preserving and storing livestock feed. The soluble portion of silage contains lactate, which is a carbon source preferred by many SRB (Li, 2009). In a continuous flow system, we would expect the initial soluble organic carbon fraction to be washed out and therefore available for microbes to use only in the early stages after initial exposure of the organics to the influent water. It is probable that microniches within the material retained some of the DOC for periods much longer than the mean residence time. However, to sustain SRB growth over the long period, low molecular weight carbon sources would need to be produced from
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 1 5 e1 1 2 8
16 silage
14 compost mix
12
SRB (%)
hydrolysis and fermentation of the insoluble portion of the organics, presumably starting with the easily degradable materials. In fact others suggested a negative correlation of sulfate reduction with lignin content, this being the most recalcitrant component (Gibert et al., 2004). As well, in our study, the organic materials with the most EDM initially, molasses/hay and silage, were the best at supporting SRB but there was an exception in the case of compost. Compost contained the least amount of EDM, but still outperformed cattails and biosolids for supporting SRB. Interestingly, the EDM of cattails, which was higher than that in compost, degraded very slowly over the duration of the experiment. All materials still contained over half the initial amount of EDM after 179 days and the rates of EDM decrease over time differed between materials suggesting that the chemical composition of each organics’ EDM varies. In another study comparing organic materials for sulfate reduction, Zagury et al. (2006) also found that leaf compost, containing low DOC, did not support sulfate reduction in their laboratory bioreactors. However, leaf compost was one of the main ingredients in a mixture, containing also poultry manure and wood chips, that was the most reactive in terms of SRR in another study (Cocos et al., 2002). The poultry manure was very high in DOC and easily accessible substances. Despite their testing of several organic materials Zagury et al. (2006) concluded that initial characteristics of the organic materials could not predict sulfate reduction rates. We make the same observation here in that, although in general greater amounts of DOC and EAM lead to higher SRRs, there is no positive statistical correlation. The other bulk material property that we measured was C/ N ratio. Several authors claim that low C/N ratio (∼10) improves sulfate reduction and metal precipitation (Bechard et al., 1994; Prasad et al., 1999). Other studies found no correlation of SRR with C/N ratio (Gibert et al., 2004). In our study, we found a strong positive correlation (r2 ¼ 0.89) between the initial C/N ratio and SRB fraction of the bacterial community (Fig. 6(a)). This finding, although with less statistical confidence, was further extended to the correlation of C/N ratio with actual sulfate reduction rate measured during the laboratory experiments (Fig. 6(b)). Zagury et al. (2006) also found that the materials with C/N close to the theoretical value (∼6.6) did not promote sulfate reduction. On the other hand, maple wood chips with C/N of 567 performed the best in their study. It is important to note that different C/N ratios were reported for the same material in different studies. The C/N ratio of 70, as opposed to 25.4 in this study, was reported for cattails in Florida wetlands (Corstanje et al., 2006). Also, higher C/N ratios of pulp mill biosolids (up to 100) were measured at an Ontario paper mill (Price and Voroney, 2007). Therefore, the C/N ratio largely depends on the nature, location, and decomposition state of each material and is not uniform for a particular material. Usually C/N ratios are recommended to ensure that neither N nor C is limiting. But, in the Trail ABR, there are high concentrations of nitrate and ammonium in the influent water, therefore nitrogen, as a nutrient source for the bacteria, may not be limiting. This may explain why we found a correlation between SRR and increasing C content in our materials. However, in other environments where the organic material is the only source of nitrogen, a lower C/N ratio may be better for sulfate reduction. Overall, the C/N ratio was the only
molasses/hay
10 8 cattails
6 4
y = 0.31x - 4.52 R² = 0.89
2 0 20
30
40
50
60
C/N 600 silage
SRR (nmol cm-3 d-1)
1124
500 400
compost mix molasses/hay
300
cattails biosolids
200 100
y = 16.64x - 401.04 R² = 0.83
0 20
30
40
50
60
C/N Fig. 6 e Correlation between (a) SRB amount in submerged organic sample and (b) laboratory determined SRR and initial C/N ratio of carbon materials. The error bars represent standard deviations from multiple measurements.
parameter that could be correlated with sulfate reduction and should be considered when choosing an organic substrate taking into account also the amount of nitrate or ammonium in the influent water. Monitoring of organic material properties and SRB over longer periods of time is needed to see how SRR changes once the EDM runs out and to measure degradation rates of the more recalcitrant components: hemicellulose, cellulose and lignin. If the EDM decomposition rates measured in this study are assumed to be linear, which is true for only some of them, then EDM in the three materials most successful at supporting SRB would run out in 1e3 years.
4.2. Variations in bacterial population among different materials One of the main questions of our work was: Do the microbial communities associated with organic matter degradation and sulfate reduction vary when different organic materials are used in an anaerobic bioreactor for metal removal? According to the Good’s coverage values our clone libraries do not reflect the total bacterial diversity in the samples and the more rare phylotypes cannot be characterized. This is due
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 1 5 e1 1 2 8
to the very high diversity within organic-rich anaerobic communities as discovered in other studies (Riviere et al., 2009, Chouari et al., 2005). Even with high throughput sequencing technologies, accurate estimations of diversity are still elusive. For example, although one study obtained 139,819 sequences from a soil sample through pyrosequencing, they still estimated only 34e48% coverage of the actual diversity (Roesch et al., 2007). Nevertheless, our analysis revealed some interesting clusters of OTUs for some of the more prevalent organisms and permitted a comparison of the presence of these in the different organic materials. The three organic materials most successful at supporting sulfate reduction contained similar bacterial communities associated with hydrolysis and fermentation. The most predominant cluster, TR27_R_4, was only distantly related to any known cultured organisms. These were Cytophaga related, which are gram-negative gliding soil bacteria known to degrade recalcitrant cellulose compounds and produce a range of fatty acids as byproducts. Similarly, the Firmicutes phylum was dominated by Clostridia rel. clones, which clustered within families or environmental groups of organisms also known to degrade recalcitrant carbohydrates and to produce fermentation byproducts such as organic acids (Fig. S1). Some of the clones in our libraries were related to microbes that degrade proteinaceous material and amino acids. Taken together this suggests that a wide variety of low molecular weight carbon compounds were produced in the organic materials over the duration of the experiment. Although the three libraries were similar at the phylum (Fig. 3) and order (Fig. 4) levels, close inspection of the phylogenetic trees revealed more specialization and diversity at the OTU level. The same observation of specialization at the family and genus levels was made in the community analyses of multiple municipal anaerobic digesters (Riviere et al., 2009). Presence of Spirochaetes related groups in silage might be related to the unique compositional properties of that material. The silage that we used came from alfalfa, which is known to be high in protein content when compared to molasses, hay or wood. High protein containing organics were found to perform better at supporting sulfate reduction (Coetser et al., 2006) and it may be that this protein content results in protein hydrolyzing and amino acid fermenting organisms that are found in the silage community and not in the others. Plus silage includes lactate and other low molecular weight organic acids. In other studies, Spirochaetes related organisms were shown to oxidize propionate and butyrate and were syntrophic with sulfate reducers (Roest et al., 2005). Many of the silage Spirochaetes OTUs in our study were related to a clone, SR_FBR_E2, from a laboratory SRB reactor treating simulated acid mine drainage (Kaksonen et al., 2004), thus this group may play an important role in supporting SRB in mine drainage treatment systems. At the phylum level, the compost and molasses/hay microbial communities were most similar to each other (Fig. S2). Their bacterial community structure could be distinguished from that for silage by the presence of the Fibrobacteres related cluster TR29_R_230. Species of the Fibrobacteres phylum are known cellulose degraders and perhaps their presence in compost and molasses/hay suggests that cellulose degradation was a more important process in those organics in contrast to silage.
1125
The fresh organics’ phylogenies were more similar to each other than to that of the ABR biosolids with the main difference being the greater proportion of Bacteroidetes clones in the fresh organics. Species from this phylum are mostly found in soils with high carbon mineralization rates, which could explain why they were found in high frequency in the fresh materials (Fierer et al., 2007). In contrast, the largest fraction of the ABR biosolids clones was assigned to the Firmicutes phylum. We hypothesize that Firmicutes related organisms are more prevalent when cellulosic materials are degrading and that Bacteroidetes related organisms are dominant in the earlier stages of organic matter degradation when there is more soluble and easily degradable material. However, clearly both hydrolysis and acidogenesis were taking place in the fresh organics and in the ABR biosolids. We suggest that the main reason for the difference in bacterial community structure between the ABR biosolids sample and the other fresh organics was the difference in their duration of submersion in the ABR. Another study of the microbial community in an anaerobic mine passive treatment system found increasing diversity over time as the system aged, but with decreasing variability (Dann et al., 2009).
4.3. Correlation of the SRB community structure with overall bacterial community, SRB numbers and SRRs The two organic samples, compost and molasses/hay mixture, were most similar to each other in all of the analyses in this study: the SRR, estimated numbers of SRB using q-PCR of dsr, overall distribution of phlya (Fig. 3) and SRB families in the clone libraries (Fig. 5). Silage, which obtained the highest SRR and supported the most SRB, could be distinguished from compost and molasses/hay with respect to bacterial, especially with respect to SRB, phylogeny. This suggests that despite the close similarities, there is a correlation between bacterial community structure and the ability of organic materials to support sulfate reducers. This was seen most clearly in the nature of the inferred SRB supported by the different materials. The dsr clone library revealed high diversity of SRB in the fresh organics versus dominance of Desulfovibrio desulfuricans related clones in the ABR biosolids. It is well known that a consortium of SRB results in a higher SRR than that obtained when culturing one species. If the nature of biosolids is such that only one strain of SRB is able to exist in that organic material then this may explain why we obtained only low SRRs in our laboratory bioreactors with biosolids. Silage had some unique features to its dsr clone library, which may explain why it achieved the highest sulfate reduction rate. Desulfomicrobium were more highly represented in silage than in any of the other organics, and far viewer Desulfovibrio clones were found in the silage library than in the rest. It might be that the Desulfonema and Desulfomicrobium related clones that we found had a preference for the carbon sources provided in silage, whereas Desulfovibrio related clones thrived better on the chemical compounds released in degradation of the other organics. In addition to comprising more readily available low molecular weight electron donors for SRB, silage may also support hydrolytic and fermentative microbial communities that are also providing preferred carbon sources for sulfate reducers. For example, when comparing the distribution of clones among
1126
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 1 5 e1 1 2 8
phyla for all the fresh organics, the one feature that differentiated silage from compost and molasses/hay was the presence of more Spirochaetes-related clones in silage. Therefore it is worthwhile investigating the role that these organisms might play in passive treatment systems for sulfate reduction especially since other studies have shown a synergistic relationship between Spirochaetes sp. and SRB (Roest et al., 2005).
5.
Conclusions
1. Five materials tested for their suitability for use in passive bioremediation processes for sulfate reduction were ranked silage > compost ¼ molasses/hay > cattails > pulp mill biosolids. 2. Of all of the bulk material properties measured the only correlation that we found was an increase of SRR and SRB numbers with C/N ratio. 3. Quantitative polymerase chain reaction of the dsr gene was found to be a good proxy for measuring potential sulfate reduction rates in the field. 4. The overall bacterial community structure of different organic materials in the same environment is very similar at the phylum level with more diversity at the OTU level. 5. There was a correlation between SRR, estimated numbers of SRB and the bacterial community structures for the materials tested. 6. The material, silage, that achieved the highest SRR and supported the most SRB, had a SRB community structure that was different from those for other materials also supporting sulfate reducers in the same environment.
Acknowledgements Funding for this work was provided by the Natural Sciences and Engineering Research Council of Canada through a Discovery Grant (RGPIN 184333-04) and Genome British Columbia through an Applied Genomics Innovation Program grant (108ROC) to Susan A. Baldwin. NatureWorks personnel, in particular Al Mattes and Jim Hall, are thanked for allowing access to the site and for providing assistance during the sampling. Dr. Steven Hallam and Jinshu Yang, of the Department of Microbiology and Immunology at the University of British Columbia are acknowledged for their assistance in preparation of the clone libraries.
Appendix. Supplementary material Supplementary material related to this article can be found online at doi:10.1016/j.watres.2010.10.038.
references
Abulencia, C.B., Wyborski, D.L., Garcia, J.A., Podar, M., Chen, W., Chang, S.H., Chang, H.W., Watson, D., Brodie, E.L., Hazen, T.C.,
Keller, M., 2006. Environmental whole-genome amplification to access microbial populations in contaminated sediments. Applied and Environmental Microbiology 72 (5), 3291e3301. Bechard, G., Yamazaki, H., Gould, W.D., Bedard, P., 1994. Use of cellulosic substrates for the microbial treatment of acid mine drainage. Journal of Environmental Quality 23 (1), 111e116. Blumenstein, E.P., Gusek, J.J., 2008. Designing a biochemical reactor for selenium and thallium removal, from bench scale testing through pilot construction. In: Hydrometallurgy: Proceedings of the Sixth International Symposium. Society for Mining, Metallurgy, Exploration Inc., Phoenix, AZ, pp. 117e129. Brodie, E.L., Desantis, T.Z., Joyner, D.C., Baek, S.M., Larsen, J.T., Andersen, G.L., Hazen, T.C., Richardson, P.M., Herman, D.J., Tokunaga, T.K., Wan, J.M., Firestone, M.K., 2006. Application of a high-density oligonucleotide microarray approach to study bacterial population dynamics during uranium reduction and reoxidation. Applied and Environmental Microbiology 72 (9), 6288e6298. Brown, A., 2007. A Comparison Study of Agricultural Materials as Carbon Sources for Sulphate Reducing Bacteria in Passive Treatment of High Sulphate Water. M.A.Sc. Chemical and Biological Engineering. University of British Columbia, Vancouver, pp. 285. Castro, J.M., Wielinga, B.W., Gannon, J.E., Moore, J.N., 1999. Stimulation of sulfate-reducing bacteria in lake water from a former open-pit mine through addition of organic wastes. Water Environment Research 71 (2), 218e223. Chouari, R., Le Paslier, D., Daegelen, P., Ginestet, P., Weissenbach, J., Sghir, A., 2005. Novel predominant archaeal and bacterial groups revealed by molecular analysis of an anaerobic sludge digester. Environmental Microbiology 7 (8), 1104e1115. Clesceri, L.S., Greenberg, A.E., Eaton, A.D. (Eds.), 1998. Standard Methods for the Examination of Water and Wastewater. American Public Health Association, American Water Works Association, and Water Environment Federation. Cocos, I.A., Zagury, G.J., Clement, B., Samson, R., 2002. Multiple factor design for reactive mixture selection for use in reactive walls in mine drainage treatment. Water Research 36 (1), 167e177. Coetser, S.E., Pulles, W., Heath, R.G.M., Cloete, T.E., 2006. Chemical characterisation of organic electron donors for sulfate reduction for potential use in acid mine drainage treatment. Biodegradation 17 (2), 169e179. Cole, J.R., Chai, B., Marsh, T.L., Farris, R.J., Wang, Q., Kulam, S.A., Chandra, S., McGarrell, D.M., Schmidt, T.M., Garrity, G.M., Tiedje, J.M., 2003. The ribosomal database project (RDP-II): previewing a new autoaligner that allows regular updates and the new prokaryotic taxonomy. Nucleic Acids Research 31 (1), 442e443. Corstanje, R., Reddy, K.R., Portier, K.M., 2006. Typha latifolia and Cladium jamaicense litter decay in response to exogenous nutrient enrichment. Aquatic Botany 84 (1), 70e78. Daffonchio, D., Borin, S., Brusa, T., Brusetti, L., van der Wielen, P.W., Bolhuis, H., Yakimov, M.M., D’Auria, G., Giuliano, L., Marty, D., Tamburini, C., McGenity, T.J., Hallsworth, J.E., Sass, A.M., Timmis, K.N., Tselepides, A., de Lange, G.J., Hubner, A., Thomson, J., Varnavas, S.P., Gasparoni, F., Gerber, H.W., Malinverno, E., Corselli, C., Garcin, J., McKew, B., Golyshin, P.N., Lampadariou, N., Polymenakou, P., Calore, D., Cenedese, S., Zanon, F., Hoog, S., 2006. Stratified prokaryote network in the oxiceanoxic transition of a deep-sea halocline. Nature 440 (7081), 203e207. Dann, A.L., Cooper, R.S., Bowman, J.P., 2009. Investigation and optimization of a passively operated compost-based system for remediation of acidic, highly iron- and sulfate-rich industrial waste water. Water Research 43 (8), 2302e2316.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 1 5 e1 1 2 8
Dojka, M.A., Hugenholtz, P., Haack, S.K., Pace, N.R., 1998. Microbial diversity in a hydrocarbon- and chlorinated-solventcontaminated aquifer undergoing intrinsic bioremediation. Applied and Environmental Microbiology 64 (10), 3869e3877. Duncan, W.F.A., Mattes, A.G., Gould, W.D., Goodazi, F., 2004. Multi-stage Biological Treatment System for Removal of Heavy Metal Contaminants. COM 2004 at the 43rd Annual Conference of Metallurgists of CIM, Hamilton, Ontario. Eccles, H., 1999. Treatment of metal-contaminated wastes: why select a biological process? Trends in Biotechnology 17 (12), 462e465. Felsenstein, J., 2005. PHYLIP (Phylogeny Inference Package). Distributed by the author. Department of Genome Sciences, University of Washington, Seattle. Fierer, N., Bradford, M., Jackson, R., 2007. Toward an ecological classification of soil bacteria. Ecology 88 (6), 1354e1364. Gibert, O., De Pablo, J., Luis Cortina, J., Ayora, C., 2004. Chemical characterisation of natural organic substrates for biological mitigation of acid mine drainage. Water Research 38 (19), 4186e4196. Godon, J.J., Zumstein, E., Dabert, P., Habouzit, F., Moletta, R., 1997. Molecular microbial diversity of an anaerobic digestor as determined by small-subunit rDNA sequence analysis. Applied and Environmental Microbiology 63 (7), 2802e2813. Grabowski, A., Nercessian, O., Fayolle, F., Blanchet, D., Jeanthon, C., 2005. Microbial diversity in production waters of a low-temperature biodegraded oil reservoir. FEMS Microbiology Ecology 54 (3), 427e443. Guindon, S., Gascuel, O., 2003. A simple, fast, and accurate algorithm to estimate large phylogenies by maximum likelihood. Systematic Biology 52 (5), 696e704. Holmes, D.E., Nevin, K.P., Woodard, T.L., Peacock, A.D., Lovley, D.R., 2007. Prolixibacter bellariivorans gen. nov., sp. nov., a sugarfermenting, psychrotolerant anaerobe of the phylum Bacteroidetes, isolated from a marine-sediment fuel cell. International Journal of Systematic Bacteriology 57 (Pt 4), 701e707. Hongoh, Y., Deevong, P., Hattori, S., Inoue, T., Noda, S., Noparatnaraporn, N., Kudo, T., Ohkuma, M., 2006. Phylogenetic diversity, localization, and cell morphologies of members of the candidate phylum TG3 and a subphylum in the phylum Fibrobacteres, recently discovered bacterial groups dominant in termite guts. Applied and Environmental Microbiology 72 (10), 6780e6788. Hulshof, A.H., Blowes, D.W., Gould, W.D., 2006. Evaluation of in situ layers for treatment of acid mine drainage: a field comparison. Water Research 40 (9), 1816e1826. INAP (International Network for Acid Prevention), 2009. The global acid rock drainage guide (GARD guide). http://www. gardguide.com/. Johnson, D.B., Hallberg, K.B., 2005a. Acid mine drainage remediation options: a review. Science of the Total Environment 338 (1e2), 3e14. Johnson, D.B., Hallberg, K.B., 2005b. Biogeochemistry of the compost bioreactor components of a composite acid mine drainage passive remediation system. Science of the Total Environment 338 (1e2), 81e93. Kaksonen, A.H., Plumb, J.J., Franzmann, P.D., Puhakka, J.A., 2004. Simple organic electron donors support diverse sulfatereducing communities in fluidized-bed reactors treating acidic metal- and sulfate-containing wastewater. FEMS Microbiology Ecology 47 (3), 279e289. Kelman Wieder, R., 1993. Ion input/output budgets for five wetlands constructed for acid coal mine drainage treatment. Water, Air, and Soil Pollution 71 (3e4), 231e270. Kondo, R., Nedwell, D.B., Purdy, K.J., De Queiroz Silva, S., 2004. Detection and enumeration of sulphate-reducing bacteria in estuarine sediments by competitive PCR. Geomicrobiology Journal 21 (3), 145e157.
1127
Lane, D.J., 1991. 16S/23S rRNA sequencing. In: Stackebrandt, E., Goodfellow, M. (Eds.), Nucleic acid techniques in bacterial systematics. Wiley, Chichester, UK, pp. 115e175. Li, W., 2009. Design of a Bioreactor for Reducing Sulphate in Cattle Drinking Water. M.A.Sc. Chemical and Biological Engineering. University of British Columbia. Lozupone, C., Hamady, M., Knight, R., 2006. UniFracean online tool for comparing microbial community diversity in a phylogenetic context. BMC Bioinformatics 7, 371. Ludwig, W., Strunk, O., Westram, R., Richter, L., Meier, H., Yadhukumar, Buchner, A., Lai, T., Steppi, S., Jobb, G., Forster, W., Brettske, I., Gerber, S., Ginhart, A.W., Gross, O., Grumann, S., Hermann, S., Jost, R., Konig, A., Liss, T., Lussmann, R., May, M., Nonhoff, B., Reichel, B., Strehlow, R., Stamatakis, A., Stuckmann, N., Vilbig, A., Lenke, M., Ludwig, T., Bode, A., Schleifer, K.-H., 2004. ARB: a software environment for sequence data. Nucleic Acids Research 32 (4), 1363e1371. Martins, M., Faleiro, M.L., Barros, R.J., Verissimo, A.R., Barreiros, M.A., Costa, M.C., 2009. Characterization and activity studies of highly heavy metal resistant sulphatereducing bacteria to be used in acid mine drainage decontamination. Journal of Hazardous Materials 166 (2e3), 706e713. Neculita, C.M., Zagury, G.J., Bussiere, B., 2007. Passive treatment of acid mine drainage in bioreactors using sulfate-reducing bacteria: critical review and research needs. Journal of Environmental Quality 36 (1), 1e16. Percent, S.F., Frischer, M.E., Vescio, P.A., Duffy, E.B., Milano, V., McLellan, M., Stevens, B.M., Boylen, C.W., Nierzwicki-Bauer, S.A., 2008. Bacterial community structure of acid-impacted lakes: what controls diversity? Applied and Environmental Microbiology 74 (6), 1856e1868. Prasad, D., Wai, M., Berube, P., Henry, J.G., 1999. Evaluating substrates in the biological treatment of acid mine drainage. Environmental Technology 20 (5), 449e458. Price, G.W., Voroney, R.P., 2007. Papermill biosolids effect on soil physical and chemical properties. Journal of Environmental Quality 36 (6), 1704e1714. Remoundaki, E., Kousi, P., Joulian, C., Battaglia-Brunet, F., Hatzikioseyian, A., Tsezos, M., 2008. Characterization, morphology and composition of biofilm and precipitates from a sulphate-reducing fixed-bed reactor. Journal of Hazardous Materials 153 (1e2), 514e524. Riviere, D., Desvignes, V., Pelletier, E., Chaussonnerie, S., Guermazi, S., Weissenbach, J., Li, T., Camacho, P., Sghir, A., 2009. Towards the definition of a core of microorganisms involved in anaerobic digestion of sludge. ISME Journal 3 (6), 700e714. Roesch, L.F., Fulthorpe, R.R., Riva, A., Casella, G., Hadwin, A.K., Kent, A.D., Daroub, S.H., Camargo, F.A., Farmerie, W.G., Triplett, E.W., 2007. Pyrosequencing enumerates and contrasts soil microbial diversity. ISME Journal 1 (4), 283e290. Roest, K., Heilig, H.G.H.J., Smidt, H., de Vos, W.M., Stams, A.J.M., Akkermans, A.D.L., 2005. Community analysis of a full-scale anaerobic bioreactor treating paper mill wastewater. Systematic and Applied Microbiology 28 (2), 175e185. Schloss, P.D., Handelsman, J., 2005. Introducing DOTUR, a computer program for defining operational taxonomic units and estimating species richness. Applied and Environmental Microbiology 71 (3), 1501e1506. Schmidtova, J., Hallam, S.J., Baldwin, S.A., 2009. Phylogenetic diversity of transition and anoxic zone bacterial communities within a near-shore anoxic basin: Nitinat Lake. Environmental Microbiology 11 (12), 3233e3251. Smith, M., Kalin, M. 1991. Floating Typha mat populations as organic carbon sources for microbial treatment of acid mine
1128
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 1 5 e1 1 2 8
drainage. Proceedings of the International Conference on Biohydrometallurgy, Troia, Portugal. Ueki, A., Akasaka, H., Suzuki, D., Ueki, K., 2006. Paludibacter propionicigenes gen. nov., sp. nov., a novel strictly anaerobic, Gram-negative, propionate-producing bacterium isolated from plant residue in irrigated rice-field soil in Japan. International Journal of Systematic Bacteriology 56 (Pt 1), 39e44. Verardo, D.J., Froelich, P.N., McIntyre, A., 1990. Determination of organic carbon and nitrogen in marine sediments using the Carlo Erba NA-1500 analyzer. Deep-Sea Research. Part A, Oceanographic Research Papers 37 (1A), 157e165. Wagner, M., Roger, A.J., Flax, J.L., Brusseau, G.A., Stahl, D.A., 1998. Phylogeny of dissimilatory sulfite reductases supports an
early origin of sulfate respiration. Journal of Bacteriology 180 (11), 2975e2982. Waybrant, K.R., Blowes, D.W., Ptacek, C.J., 1998. Selection of reactive mixtures for use in permeable reactive walls for treatment of mine drainage. Environmental Science & Technology 32 (13), 1972e1979. Zaikova, E., Walsh, D.A., Stilwell, C.P., Mohn, W.W., Tortell, P.D., Hallam, S.J., 2009. Microbial community dynamics in a seasonally anoxic fjord: Saanich Inlet, British Columbia. Environmental Microbiology 12 (1), 172e191. Zagury, G.J., Kulnieks, V.I., Neculita, C.M., 2006. Characterization and reactivity assessment of organic substrates for sulphatereducing bacteria in acid mine drainage treatment. Chemosphere 64 (6), 944e954.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 2 9 e1 1 3 8
Available at www.sciencedirect.com
journal homepage: www.elsevier.com/locate/watres
Biodiversity and population dynamics of microorganisms in a full-scale membrane bioreactor for municipal wastewater treatment Cai-Yun Wan a,1, Heleen De Wever b,1, Ludo Diels b, Chris Thoeye c, Jun-Bin Liang a, Li-Nan Huang a,b,* a
Key Laboratory of Gene Engineering of the Ministry of Education, School of Life Sciences, Sun Yat-Sen University, Guangzhou 510275, PR China b Unit of Separation and Conversion Technology, Flemish Institute for Technological Research (VITO), B-2400 Mol, Belgium c Research and Product Development Department, Aquafin NV, B-2630 Aartselaar, Belgium
article info
abstract
Article history:
The total, ammonia-oxidizing, and denitrifying Bacteria in a full-scale membrane biore-
Received 5 June 2010
actor (MBR) were evaluated monthly for over one year. Microbial communities were
Received in revised form
analyzed by denaturing gradient gel electrophoresis (DGGE) and clone library analysis of
30 September 2010
the 16S rRNA and ammonia monooxygenase (amoA) and nitrous oxide reductase (nosZ )
Accepted 4 November 2010
genes. The community fingerprints obtained were compared to those from a conventional
Available online 12 November 2010
activated sludge (CAS) process running in parallel treating the same domestic wastewater. Distinct DGGE profiles for all three molecular markers were observed between the two
Keywords:
treatment systems, indicating the selection of specific bacterial populations by the con-
Membrane bioreactor
trasting environmental and operational conditions. Comparative 16S rRNA sequencing
Bacteria
indicated a diverse bacterial community in the MBR, with phylotypes from the a- and
Ammonia-oxidizing and denitrify-
b-Proteobacteria and Bacteroidetes dominating the gene library. The vast majority of
ing bacteria
sequences retrieved were not closely related to classified organisms or displayed relatively
Molecular diversity
low levels of similarity with any known 16S rRNA gene sequences and thus represent
Population dynamics
organisms that constitute new taxa. Similarly, the majority of the recovered nosZ sequences were novel and only moderately related to known denitrifiers from the a- and bProteobacteria. In contrast, analysis of the amoA gene showed a remarkably simple ammonia-oxidizing community with the detected members almost exclusively affiliated with the Nitrosomonas oligotropha lineage. Major shifts in total bacteria and denitrifying community were detected and these were associated with change in the external carbon added for denitrification enhancement. In spite of this, the MBR was able to maintain a stable process performance during that period. These results significantly expand our knowledge of the biodiversity and population dynamics of microorganisms in MBRs for wastewater treatment. ª 2010 Elsevier Ltd. All rights reserved.
* Corresponding author. Key Laboratory of Gene Engineering of the Ministry of Education, School of Life Sciences, Sun Yat-Sen University, Guangzhou 510275, PR China. Tel./fax: þ86 20 8411 2399. E-mail address:
[email protected] (L.-N. Huang). 1 These authors contributed equally to this work. 0043-1354/$ e see front matter ª 2010 Elsevier Ltd. All rights reserved. doi:10.1016/j.watres.2010.11.008
1130
1.
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 2 9 e1 1 3 8
Introduction
Submerged membrane bioreactors (MBR) combine efficient biological treatment with membrane separation and are now widely accepted as an advanced technology for obtaining high-quality effluent. This process offers several important advantages over conventional wastewater treatment systems, including high biodegradation capacity and efficiency, excellent permeate quality and low sludge production. As more stringent effluent standards are expected and the costs of membrane and membrane process continue to fall, the applications of MBR in municipal and industrial wastewater treatment are becoming increasingly widespread around the globe (Judd, 2007). The bacterial communities present in active biomass in activated sludge mixed liquor represent the core component of every MBR for biological carbon and nutrient removal. While bacteria in wastewater treatment plants (WWTP) have been intensively studied by culture-dependent methods (Ueda and Earle, 1972) and nucleic acid-based molecular approaches (Bond et al., 1995; Nogueira et al., 2002; Wagner and Loy, 2002), surprisingly little research has been conducted to explore the influence of membrane separation and operating conditions on the overall microbial community structure and diversity of the MBR. Consequently, much of what is known or assumed concerning biological processes in MBRs has primarily come from investigations of conventional activated sludge (CAS) systems, regardless of the fact that significant differences in operating conditions exist between the two treatment processes. Importantly, MBRs are typically operated at high sludge concentrations and low food-to-microorganism (F/M) ratios. Consequently, since energy supply is limited, the microorganisms would preferentially use the carbon sources to satisfy their maintenance energy demands as opposed to biomass growth (Muller et al., 1995; Low and Chase, 1999). In addition, other contrasting operational aspects of MBRs, including longer sludge retention time (SRT), shorter hydraulic retention time (HRT) and shear forces, would also have an impact on the activated sludge communities. To date, denaturing gradient gel electrophoresis (DGGE)-based community structure analysis has indicated that the bacterial communities in pilot-scale MBRs fed with raw sewage were distinct from that in the CAS process (Luxmy et al., 2000), while another investigation (through fluorescent in situ hybridization, FISH) has revealed minor differences in the nitrifying community composition between parallel-running MBR and CAS pilot systems (Manser et al., 2005). In addition, pilot studies monitoring long-term community structure changes have demonstrated diverse and dynamic bacterial populations in MBRs for graywater (Stamper et al., 2003) and municipal wastewater (Miura et al., 2007) treatment even during periods of stable operation. More recently, Huang et al. (2008) have revealed by 16S rRNA clone library analysis that novel members of the Bacteria domain are ecologically significant in laboratory-scale municipal wastewater treatment MBRs operated under different conditions. These pioneering works highlight the need for exploring the microbial community composition and diversity in these relatively new biological wastewater treatment systems. To our knowledge,
there have been no molecular microbial diversity surveys of full-scale MBR systems for municipal wastewater treatment, and seasonal variations of these diverse communities in relation to process performance remain little known. We hypothesized that the contrasting operational and environmental conditions of full-scale MBRs as opposed to CAS systems will have great impact on the physiological state and bacterial community structure and population dynamics of mixed liquor. Our study site (in a European country) represents a unique and ideal WWTP at which to examine and compare the microbial community composition, since there is an MBR and a CAS system running in parallel treating the same municipal wastewater and the MBR was originally inoculated with activated sludge from the CAS process. We used DGGE fingerprinting technique to examine how the structure of bacterial populations varied seasonally in both environments. Clone library analysis of phylogenetic and functional markers provided the first detailed molecular look at the composition and diversity of total community and ammonia- oxidizing and denitrifying Bacteria in a full-scale municipal wastewater treatment MBR. Additionally, we examined the impact of changes in MBR operating conditions on the key microbial groups when external carbon sources for the stimulation of denitrification were switched from one to another during the study period. Significant shifts in total bacteria and denitrifying community were observed with some of the major shifting bands in the 16S rRNA gene DGGE profiles corresponding to microorganisms capable of denitrification.
2.
Materials and methods
2.1.
Full-scale MBR
The submerged MBR (6520 m3/d in capacity) was constructed in 2003 as an extension of the existing CAS system to comply with a more stringent effluent regulation and an increase in load. It consists of a denitrification compartment where pretreated municipal wastewater is introduced, a nitrification compartment, and a filtration compartment where activated sludge is retained by submerged hollow-fiber microfiltration membrane modules (Zenon, ZeeWeed, total membrane surface area 10,160 m2 and nominal pore diameter 0.03 mm). The compartments are well-mixed either by continuous stirring (denitrification) or aeration (nitrification and filtration). The MBR is operated at a constant flow of 230 m3/h, with the remaining flow (ranging between 0 and 1440 m3/h, with an average value of 418 m3/h) being treated in the parallel CAS system. Detailed set-up and operational information of the full-scale MBR was given elsewhere (Fenu et al., 2010). Initially, acetate was added to the denitrification compartment to enhance denitrifying activity. This carbon source was then changed to butyrate on December 5 2006. Subsequent switches of carbon source between butyrate and acetate occurred on April 4 and in the end of May 2007 (Fig. 1). In contrast to the MBR, the CAS process has no denitrification zones. Pretreated wastewater is introduced directly to the aeration compartments. Separation of treated water from
1131
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 2 9 e1 1 3 8
A S O
N D J
F M A
M J J
Time (m) J
A S O N
D
J
F M
A M J
J
MAR 2007 FEB 2007 APR 2007 JUN 2007 MAY 2007 SEP 2006 AUG 2006 NOV 2006 DEC 2006 OCT 2006 JUL 2006 JAN 2007 JUL 2007 MAY 2007 APR 2007 JAN 2007 FEB 2007 MAR 2007 DEC 2006 JUL 2007 JUN 2007 NOV 2006 OCT 2006 SEP 2006 AUG 2006 JUL 2006
Marker
J
Marker
Marker
Time (m)
MBR
CAS
Similarity (%)
CAS
MBR
75
80
85
90
95
100
Fig. 1 e Comparison and Pearson correlation analysis of 16S rRNA gene DGGE fingerprint profiles from the MBR and CAS over the course of 13 months (July 2006 through July 2007). Clustering is based on the unweighted pair group method using arithmetic average (UPGMA) algorithm. Arrows indicate the time points when switches of carbon source occurred: from acetate to butyrate on December 5 2006 (one week before the December 2006 sludge sampling), back to acetate on April 4 2007 (three weeks before the April 2007 sampling), and to butyrate again in the end of May (one week after the May 2007 sampling).
the biomass is accomplished by secondary sedimentation. Consequently, sludge concentration (mixed liquor suspended solid, MLSS) in the bioreactors is maintained at a much lower level than that in the MBR (2.49 g/l versus 9.08 g/l, see Table S1 in the Supplementary Materials). Average sludge load (or F/M) during the study period was 0.18 and 0.025 kg BOD/kg MLSS.d for the CAS and MBR systems, respectively.
2.2.
Analytical procedures
All samples were kept in cooler boxes during sampling and transportation to the laboratory (within 1 h). 24-h composite samples of feed wastewater and effluents (membrane permeate and CAS effluent) were collected monthly for over one year (July 2006-July 2007), taking into account the HRT of both treatment systems. Samples were analyzed for a full-set of conventional performance parameters (Supplementary Materials text). Mixed liquor was sampled (in triplicate) directly from the aeration compartments of the two treatment systems. To indicate biological activity, specific oxygen uptake rate (SOUR) and specific nitrification rate (SNR) were determined as described previously (Huang et al., 2008). Additional sludge samples were taken from the denitrification compartment of the MBR for the measurement of specific denitrification rate (SDNR) (Supplementary Materials text) and molecular microbial analysis of the denitrifying community (as described below).
2.3.
DNA Extraction and DGGE analysis
Aliquots (1e3 mL) of mixed liquor samples were centrifuged for 10 min at 12 000 g, 4 C. The cell pellets were rinsed twice with sodium phosphate buffer (120 mM, pH 8.0) and total community genomic DNA was extracted using an UltraClean Soil DNA kit (MoBio, Solana Beach, Calif.). The 16S rRNA gene,
and ammonia monooxygenase and nitrous oxide reductase genes (amoA and nosZ, responsible for the key steps in the ammonia oxidation and denitrification pathways, respectively) were chosen as molecular markers for community fingerprint analysis of total bacteria and ammonia-oxidizing and denitrifying communities, respectively. For total bacterial community, a 496-bp 16S rRNA gene fragment was amplified with primer set GC-63F/518R as described previously (Huang et al., 2008), and DGGE of the PCR products was performed using an INGENYphorU-2 apparatus (INGENY International BV, The Netherlands). Fragments of amoA (about 490 bp) were amplified with primers amoA-1F-Clamp and amoA-2R-TC (Supplementary Materials text) and resolved by DGGE following the procedures of Nicolaisen and Ramsing (2002) with some modifications (Supplementary Materials text). The nosZ fragments (414 bp in length) were obtained using primers nosZeF and nosZ1622R-GC (Throback et al., 2004) and DGGE was performed as detailed in the Supplementary Materials text. DGGE profiles were analyzed using Bionumerics 4.0 software (Applied Maths). Similarity matrices between tracks were calculated from the intensity data with band-independent, whole-densitometric curve-based Pearson correlation coefficients and then subjected to UPGMA (unweighted pair group method using arithmetic average) clustering.
2.4.
Clone library, rarefaction, and statistical analysis
Clone libraries of 16S rRNA, amoA and nosZ genes were constructed for DNA extracts from MBR sludges obtained in November 2006. Nearly complete 16S rRNA gene fragments were amplified in triplicate with primers 27F and 1492R (Dojka et al., 1998) as described previously (Huang et al., 2004). The amplicons were pooled, purified with a QIAquick PCR purification kit (Qiagen), and cloned into pMD18-T vector by TA
1132
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 2 9 e1 1 3 8
Table 1 e Bioreactor performance of the full-scale MBR and CAS process.a COD Influent MBR effluent CAS effluent
220 90 24 6 31 7
TOC 54 20 ND ND
DOC 18 5 8.6 2.1 9.2 1.7
NHþ 4 eN
TeN 26 8 7.7 1.9 b 14 6
19 8 0.2 0.2 2.9 2.3
NO 3 eN 0.9 0.6 4.8 2.4 8.5 7.0
b
NO 2 eN 0.1 0.1 0.1 0.2 0.3 0.2
b b
TeP 3.9 1.6 0.3 0.2 0.5 0.2
b
a Concentrations (mean standard deviation) in mg/l. Data are based on the monthly samples collected during the whole study period (n ¼ 13). b Some values are below detection limit and thus not included in the statistical analysis. ND, not determined.
Cloning Kit (Takara). Randomly selected clones from the library were determined by colony PCR (with primer combinations 27F/M13-47 and 27F/RV-M) for their rRNA gene inserts orientation and then sequenced forwardly using primers M1347 or RV-M on Applied Biosystems 3730xl capillary sequencers. Chimeric sequences were identified as described (Huang et al., 2004) and excluded from subsequent analysis. For representatives of the operational taxonomic units (OTU, defined as groups in which sequences differed by 3%) that comprised two or more clones, nearly complete 16S rRNA gene sequences were obtained by a second sequencing run starting from the opposite side of the vector with the corresponding vector-primers. Rarefaction, richness (nonparametric richness estimators ACE and Chao 1) and diversity statistics (the Shannon diversity index) were calculated using DOTUR software (Schloss and Handelsman, 2005) and phylogenetic analyses were performed using the ARB software package (Ludwig et al., 2004) as described previously (Huang et al., 2008). Neighbor-joining (NJ) trees that differed in the reference sequences, the set of alignment positions and the outgroup sequences used, were generated and compared. For functional gene cloning, non-GC-clamp primers were used to obtain the amoA and nosZ fragments. PCR conditions were the same as those used for DGGE analysis. Randomly selected clones from each library were screened by restriction fragment length polymorphism (RFLP) analysis (Supplementary Materials text). Then one to three representatives of each unique RFLP type were fully sequenced using vector specific primers. OTUs were defined at the 95% sequence similarity threshold using DOTUR (Schloss and Handelsman, 2005). Statistical and rarefaction analysis of the amoA and nosZ sequences were conducted as for the 16S rRNA sequences. Phylogenetic trees were calculated using ARB software (Ludwig et al., 2004). To compare microbial community composition before and after the carbon source change, additional clone libraries of 16S rRNA and nosZ genes were established for MBR sludge sampled in February 2007. The 16S rRNA, amoA and nosZ gene sequences obtained in this study have been deposited in the EMBL/GenBank/DDBJ database under accession numbers FN827166-FN827320 and FN868486-FN868537, respectively.
3.
Results
3.1.
Biological activities and performance
Both treatment systems were able to maintain a good and stable carbon (COD) removal over the course of 13 months (Table 1, Fig. S1). Complete nitrification was consistently
achieved in the MBR as it was operated at a low food (ammonium) to microorganisms’ ratio. In contrast, although ammonium concentrations in the CAS effluent were mostly below 3.0 mg/l, ammonium removal was relatively low (29e77%) from December 2006 through March 2007 (Fig. S1) likely due to the relatively low temperature and SNR during that period. Statistical analysis revealed a correlation between ammonium removal and bioreactor temperature (Pearson’s correlation coefficient r ¼ 0.702, P < 0.001) and SNR (r ¼ 0.560, P < 0.05) for the CAS system. Although average SOUR value was relatively higher for the CAS process (Table S1), total community activity (as indicated by the SOUR values) was not significantly different between the two treatment systems (P ¼ 0.269, paired t tests). In contrast, the ammonia-oxidizing Bacteria (AOB) community was more active in the CAS reactor as evidenced by the higher SNR values (Table S1 and P ¼ 0.004, paired t tests). In spite of these, the MBR process constantly provided a better treatment in terms of treated water quality and carbon and nutrient removal from sewage (Table 1, Fig. S1) probably due to the higher biomass concentration and membrane rejection of suspended solids and organic compounds. An additional denitrification zone and the constant flow would also have contributed to the increased process efficiency. The substantial fluctuations in total and denitrifying bacteria associated with changes in carbon source (as described below) did not significantly affect the overall bioreactor performance of the MBR.
3.2. Population dynamics of total bacteria and N-cycling communities: MBR versus CAS PCR-based DGGE fingerprints were used to compare microbial community composition between the MBR and CAS, and to follow temporal fluctuations in bacterial populations in each treatment system. Profoundly different pattern types by DGGE analysis of the 16S rRNA gene were distinguished between the two bacterial communities, and this was confirmed by the statistical analysis which formed two separate major clusters according to the environment (Fig. 1). While the MBR 16S rRNA fingerprints were dominated by a limited number of bands, the CAS fingerprints displayed complex banding patterns and thus indicated a more diverse bacterial community. For DGGE analysis of N-cycling groups, the amoA gene profiles revealed a simple AOB community in the MBR and CAS, while fingerprints of the nosZ gene exhibited complex banding patterns for the denitrifying communities in both systems (Fig. S2 and Fig. 2). Similar to those of the 16S rRNA gene, DGGE profiles of both functional markers formed system-specific clusters in the respective UPGMA dendrograms. These results indicated that the membrane separation process and different
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 2 9 e1 1 3 8
operating conditions had led to the selection of different total bacterial and N-cycling communities in the MBR. Temporally, the MBR bacterial community showed considerable stability before December 12 2006 (Fig. 1). However, a clear shift in community composition was evident since the samples of January 2007 which were taken one and a half months after the carbon source was changed from acetate to butyrate. Thereafter, the MBR populations gradually evolved to another fluctuating community with the DGGE fingerprints forming a separate cluster in the UPGMA dendrogram. Fluctuations were mainly due to shifts of the dominant bands and variations in relative abundance of common bands among samples from that period. Matching of clones from the 16S rRNA gene library back to the community band patterns (by running GC-63F/518R-amplicons of randomly selected clones together with amplicons of the original total community genomic DNA on the same DGGE gels) revealed that some of the important shifting bands corresponded to microorganisms capable of denitrification (Table S2). Highly similar results were obtained by DGGE analysis of the denitrification coding gene (Fig. 2). The nosZ fingerprints of samples collected one and a half months after the first carbon source change formed a separate and fluctuating clade in the clustering analysis. In contrast, little variations were found in AOB populations between the sludges taken before and after the carbon source change (Fig. S2). Generally, the clustering of amoA fingerprints more followed the time course, reflecting a gradual evolution of this functional group over time in the MBR. DGGE analysis revealed fluctuations over time in community composition of total bacteria and N-cycling groups in the CAS process (Figs. 1 and 2 and Fig. S2). Fingerprints of 16S rRNA gene from December 2006 to March 2007 were highly similar, and these communities formed a tight cluster separating from the prior and subsequent samples in the UPGMA dendrogram. This trend was even more profound in DGGE analysis of the nosZ gene. The amoA fingerprint analysis also showed that AOB communities from the cold months differed considerably from
1133
those of other seasons. These findings suggested that factors related to seasonal forces had an influence on the CAS bacterial populations. In addition, samples collected in July 2006 clustered apart from those of July 2007 in all three UPGMA dendrograms, suggesting no seasonal reproducibility in temporal evolution of microbial communities.
3.3.
Microbial diversity in the full-scale MBR
To investigate the biodiversity of total bacterial community and N-cycling groups in the MBR, clone libraries of the 16S rRNA and amoA and nosZ genes were constructed for sludge samples collected in November 2006. Comparative sequence analysis of 146 randomly selected clones from the 16S rRNA gene library revealed 99 unique OTUs distributed among at least 14 phylogenetic divisions (Table 2 and Fig. 3). The minimum numbers of bacterial species in the MBR were predicted at approximately 300 according to both nonparametric estimators (Chao 1 and ACE) (Table 2). The vast majority of the OTUs comprised a single clone, indicating a diverse bacterial community. This was further supported by the steep rarefaction curve (Fig. S3). Clone distribution within the library was the following: b-Proteobacteria (27%), Bacteroidetes (25%), and a-Proteobacteria (14%). The remaining phylogenetic groups, such as the d-Proteobacteria, Actinobacteria, Acidobacteria, Chorobi, and Firmicutes, made up a total of 34% of the bacterial library. Only seven OTUs were identified as already known species, and five OTUs affiliated with not yet cultured microorganisms in public databases with 97% sequence similarity (Table 2). The remaining 87 OTUs (90% of the total clones) showed <97% similarity with the most closely related bacterial 16S rRNA gene sequences and thus represent novel phylotypes not described in previous analyses of activated sludge communities. Of these, some displayed very low levels of identity to any known 16S rRNA sequences and thus could not be affiliated (Fig. 3).
Fig. 2 e Comparison and Pearson correlation analysis of nosZ gene DGGE fingerprints from the MBR and CAS over the course of 13 months (July 2006 through July 2007). Clustering is based on the unweighted pair group method using arithmetic average (UPGMA) algorithm. Arrows indicate the time points when switches of carbon source occurred: from acetate to butyrate on December 5 2006 (one week before the December 2006 sludge sampling), back to acetate on April 4 2007 (three weeks before the April 2007 sampling), and to butyrate again in the end of May (one week after the May 2007 sampling).
1134
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 2 9 e1 1 3 8
Table 2 e Diversity, predicted richness and novelty of the environmental clone sequences retrieved from the MBR.a No. of clones analyzed
No. of OTUs
146
99
47
amoA
80
13
93.8
nosZ
78
22
89.7
16S rRNA
% Coverage
Chao 1 valueb
ACE valueb
Shannon index
OTUs 97% cultivatedc
OTUs 97% not yet cultivatedc
Novel OTUs (<97%)d
303 (203, 497) 16 (13, 30) 29 (23, 56)
310 (214, 487) 17 (14, 32) 28 (24, 47)
4.38
7 (7.1, 6.8) 2 (15.4, 6.3) 0
5 (5.1, 3.4) 6 (46.2, 75.0) 0
87 (87.9, 89.7) 5 (38.5, 18.8) 22 (100, 100)
2.35 2.70
a Data are based on the November 2006 sludge clone libraries. Operational taxonomic units (OTU) were defined by a 3% and 5% difference in the nucleic acid sequence alignment for the 16S rRNA and the amoA and nosZ genes, respectively. Accordingly, Good’s coverage estimates were calculated using a 3% and 5% cutoff for the 16S rRNA and functional genes, respectively. b Numbers in parentheses are lower and upper 95% confidence intervals for the nonparametric richness estimators Chao1 and ACE. c Sharing 97% (95% for the amoA and nosZ genes) sequence similarity to the closest sequence with a cultivated representative. d Sharing 97% (95% for the amoA and nosZ genes) sequence similarity to the closest sequence without a cultivated representative.
Screening and comparative sequencing of 80 amoA clones resulted in a total of 13 OTUs (Table 2). Phylogenetic analysis revealed a low diversity of AOB in the MBR (Fig. S4). All retrieved amoA sequences belonged to the b-Proteobacteria AOB and, with only one exception, affiliated with the
Nitrosomonas oligotropha-like cluster. The vast majority of these sequences (53% of the total OTUs and 72% of the clone library) formed two individual clades separating apart from well-described nitrifier species but with amoA clones previously recovered from other activated sludge systems as their
Fig. 3 e Evolutionary distance dendrogram constructed using the neighbor-joining method and showing the phylogenetic affiliation of the 16S rRNA gene sequences retrieved from the MBR (activated sludge collected in November 2006). A region from position 28 to position 927 (Escherichia coli numbering) was included in the phylogenetic analysis. The number of OTUs and percentage of total clones (numbers shown to the left of the clades) belonging to the corresponding division in the clone library are indicated in parentheses. The scale bar represents the substitution per nucleotide position. The tree was calculated using the ARB software package. Members of the Archaea domain were used as outgroups (not shown).
1135
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 2 9 e1 1 3 8
Flavobacterium Terrimonas
Ferribacterium Zoogloea
Niastella Unclassified
Flavobacterium
Haliscomenobacter
Rhodoferax
Unclassified
Unclassified Aquabacterium
Rhodoferax
Ferribacterium
Unclassified
Acidovorax Thiobacter Diaphorobacter Propionivibrio Zoogloea
Comamonas Derxia Dechloromonas
-Proteobacteria November 2006
Curvibacter
Aquabacterium Hydrogenophaga
Terrimonas
-Proteobacteria February 2007
Bacteroidetes November 2006
Bacteroidetes February 2007
Fig. 4 e Distribution of genera within the dominant groups (b-Proteobacteria and Bacteroidetes) in the November 2006 and February 2007 MBR 16S rRNA clone libraries. The total number of clones used for each gene library analysis was 146 and 113, respectively. Activated sludge samples were obtained approximately three weeks before and 11 weeks after the first carbon source change (from acetate to butyrate on December 5 2006). Bacterial 16S rRNA gene sequences are assigned to genera by using the Ribosomal Database Project (RDP) Classifier. Percentages are based on the number of clones of bProteobacteria and Bacteroidetes in each library.
closest relatives. No Nitrosospira-related sequences were detected in the amoA library. Sequence analysis of 78 randomly selected clones from the nosZ library revealed a total of 22 OTUs (Table 2). Of these, 20 sequences exhibited <90% similarity with their closest neighbors in public databases and were not closely related to any cultured denitrifiers (71e84% similarity) (Fig. S5). In marked contrast to the 16S rRNA and amoA gene sequences, the vast majority of the nosZ sequences (20 OTUs and 93% of the gene library) do not have their database matches from activated sludge processes; instead, they are most closely related to environmental clones recovered from soils and sediment. Phylogenetic analysis grouped all nosZ sequences into two major clusters whose cultured members are a- and b-Proteobacteria, although in some cases they formed subclades clearly separated from other known bacterial species (Fig. S5). Additional clone libraries of the 16S rRNA and nosZ gene were generated for MBR sludge collected in February 2007 when stabilization of microbial community after the disturbance (change in external carbon) was evidenced by DGGE analysis (Figs. 1 and 2). The data were then compared with those from the November 2006 sample. Although comparative 16S rRNA sequencing revealed that the b-Proteobacteria, Bacteroidetes and a-Proteobacteria remained the predominant groups within the February 2007 community, relative abundance of clones in the gene library increased by 44 and 40% for the first two divisions and decreased by 42% for the latter (Fig. S6). Large differences between the two 16S rRNA gene libraries were also detected at finer phylogenetic levels of resolution. Of the 13 b-Proteobacteria-affiliated genera identified, only four were found common in both communities and shifts in relative abundance of these genera were observed, particularly for Zoogloea, Rhodoferax, and the unclassified b-Proteobacteria that were only most closely related to environmental clones (Fig. 4). Similarly, significant shifts in abundance distribution of genera affiliated with the Bacteroidetes were found between the two clone libraries, with Flavobacterium clearly enriched and the unclassified Bacteroidetes less favored in the February 2007 community (Fig. 4). At the phylotype level, only 17 OTUs were detected in both bacterial communities, and they were disproportionately distributed in the respective clone libraries. Most notably, of
the three most abundant OTUs in either clone library, two were not detected or could only be occasionally recovered in the other library. Phylogenetic analysis identified in the evolutionary distance trees sample-specific clusters or clusters where clones were disproportionately distributed in the two 16S rRNA gene libraries (data not shown). In addition, rarefaction (Fig. S3) and diversity index analysis (data not shown) revealed significantly different relative species richness in the two MBR sludges, the February 2007 sample having lower diversity. Clone library analysis of the nosZ gene also indicated a significant deviation in denitrifying bacteria from the November 2006 community. The library constructed from the February 2007 sample was dominated (80%) by a diverse group of sequences clustered with cultured members from the b-Proteobacteria (data not shown). Of the 18 OTUs identified, 11 were not detected in the November 2006 sample. Significant shifts in some of the dominant OTUs were also observed between the two denitrifying communities. Rarefaction analysis indicated that the November 2006 nosZ library had a relative species richness significantly higher than that of the February 2007 library (Fig. S3), similar results being obtained by the nonparametric estimators of species richness, including Chao 1and ACE values (29 versus 18 and 28 versus 20, respectively).
4.
Discussion
In a previous pilot-scale study, Luxmy et al. (2000) used molecular fingerprinting technique to demonstrate that bacterial community in the MBR fed with raw sewage was different from that in the CAS process. In agreement with this, our DGGE analysis revealed process type-specific microbial communities, the full-scale MBR and CAS systems harboring distinct total bacterial communities and N-cycling groups with the corresponding community fingerprints separating apart in the UPGMA dendrograms independent of seasons (Figs. 1 and 2 and Fig. S2). Although these results need to be confirmed by further research at other full-scale plants, we believe that our findings are practically representative given that samples spanning a period of over one year were
1136
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 2 9 e1 1 3 8
analyzed for both systems. Our study site is particularly interesting for such a comparison since the two processes are operated in parallel and treat the same wastewater. Importantly, the MBR was originally inoculated with activated sludge from the CAS plant. The differences in microbial communities of the two environments are likely due to the complete rejection of biomass by the membrane and the contrasting operating conditions applied (e.g., sludge age, F/M ratio, flow consistency) in the MBR which would greatly affect microbial community structure and physiological state of mixed liquor. The more complex 16S rRNA DGGE profiles observed for the CAS samples are most probably related to the bigger temporal fluctuations in substrate concentrations in this system since it is operated at a variable flow mode, thus allowing for diverse organisms with different growth kinetics to be transiently competitive. Compared with the CAS process, the MBR has an additional denitrification compartment and this may also have a significant influence on the activated sludge community. Finally, the impact of addition of readily biodegradable carbon substrates on the MBR microbial functional groups might be important since less variable substrate composition may lead to less complex microbial diversity (Hagman et al., 2008). Our comparative 16S rRNA sequence analysis has shown that, similar to the conventional treatment systems (Wagner and Loy, 2002), Proteobacteria- (b and a) and BacteroidetesOTUs were most frequently detected in the MBR community (Fig. 3). However, the vast majority of retrieved sequences represent putative phylotypes never obtained in culture or not described in previous investigations of activated sludge ecosystems. Similarly, novel bacterial sequences were abundantly recovered from lab-scale MBRs treating domestic wastewater and operated under different conditions (Huang et al., 2008). These results are consistent with molecular characterizations of microbial communities in wastewater treatment ecosystems which have revealed that previously unrecognized, as yet uncultured bacteria are responsible for most key processes in CAS and biofilm reactors (Wagner and Loy, 2002). In-depth molecular inventories of the relatively novel, microbially diverse MBR systems are needed, as this more comprehensive picture would help reveal factors influencing process efficiency and stability and understand how selection pressures imposed by membrane separation affect community structure and diversity within bioreactors. Ultimately, a thorough knowledge of the microbial community structure in the mixed liquor biomass will provide opportunities to elucidate the underlying mechanisms for biofilm development and maturation on the membrane surface which lead to severe irreversible fouling, a major obstacle for the wider application of MBRs for wastewater treatment. Ammonium is removed from wastewater via nitrification and denitrification. Previous investigations have shown that a wide variety of different b-proteobacterial ammonia oxidizers occur in nitrifying WWTPs, with members affiliated with the Nitrosomonas europaea/eutropha lineage, the Nitrosococcus mobilis lineage and the Nitrosomonas marina cluster were most frequently detected (reviewed by Wagner and Loy, 2002). However, Manser et al. (2005) reported more recently that bacteria related to the N. oligotropha lineage dominated the AOB populations in a pilot MBR plant treating domestic
wastewater. Similarly, our comparative amoA sequencing revealed that the AOB community in the full-scale MBR is simple with the detected OTUs almost exclusively affiliated with the N. oligotropha cluster (Fig. S4). Since members of the N. oligotropha lineage have relatively high substrate affinity (Koops and Pommerening-Roser, 2001), they may gain ecological advantages in MBRs for domestic wastewater treatment where the food (ammonia) to microorganisms (ammonium oxidizers) ratios are generally low. The presence of an AOB community low in species richness in the MBR might render its nitrification more susceptible to perturbation. Microbial population dynamics have been well-documented in traditional treatment systems (Lee et al., 2002; Wells et al., 2009). Although substantial fluctuations in bacterial community structure have been demonstrated previously in laboratory- or pilot-scale MBRs (Stamper et al., 2003; Miura et al., 2007; Huang et al., 2008), the bacterial population in the full-scale MBR was rather stable during the period before external carbon change (Figs. 1 and 2). Temporal fluctuations in influent wastewater characteristics and temperature in the bioreactors are generally thought to affect microbial community structure in WWTPs. The impact of feed strength should be less significant for MBRs since they are typically operated at lower F/M ratios. Likewise, the influence of invasion by exotic species via influent and extinction of bacteria from the indigenous community are less important since MBRs tend to maintain high biomass concentrations and limited sludge wasting by membrane rejection. In addition, the limited variations in bioreactor temperature at our study site would also favor a stable bacterial community in the MBR. Readily biodegradable carbon sources have been intermittently added to the anoxic zones of conventional treatment plants to enhance denitrification (Hallin and Pell, 1998; Hasselblad and Hallin, 1998). Although the effectiveness of this approach to increase the denitrification capacity is well documented, little is known about the impacts of external carbon on the microbial community structure and other biological processes of activated sludge. Our DGGE analysis revealed profound different banding patterns of the 16S rRNA and nosZ gene after the carbon source was changed in December 2006 from acetate to butyrate in the full-scale MBR, whereas similar shifts in microbial community profile were not detected in the parallel-running CAS process during the same period (Figs. 1 and 2). Clone library analysis further supported that total bacterial and denitrifying community composition differed significantly between MBR sludge obtained before and after the external carbon change, the later sample having lower 16S rRNA and nosZ gene diversity. Hagman et al. (2008) have recently reported substrate (external carbon source) preferences by involved microbial consortia, with acetate being used by more diverse bacterial populations which are among the dominant denitrifying groups typically present in activated sludge ecosystems. Similarly, Ginige et al. (2005) have demonstrated that the addition of acetate (to enhance denitrification) caused a dramatic shift in the microbial community structure, with denitrifiers from the families Comamonadaceae and Rhodocyclaceae in the b-Proteobacteria being rapidly enriched in the laboratory-scale bioreactor originally seeded with activated sludge from a full-scale plant (which had not been exposed to
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 2 9 e1 1 3 8
any form of external carbon source augmentation). Interestingly, our matching clone screening showed that 16S rRNA sequences corresponding to some of the major shifting bands in the total-community DGGE profiles of the MBR could be assigned to as yet uncultured Ferribacterium/Dechloromonasrelated bacteria and Zoogloea species in the family Rhodocyclaceae (Table S2), and members of genera Dechloromonas and Zoogloea have previously been found consistently present in a denitrifying fluidized bed bioreactor (Gentile et al., 2006). These indicate a possible impact of the change in carbon source on the denitrifier community in the full-scale bioreactor. The additional fluctuations in community profiles from April through July 2007 might reflect response of the mixed liquor bacterial populations to the subsequent switches of carbon source between butyrate and acetate. In spite of this, the overall process performance of the MBR remained relatively stable during the study period. Other studies have demonstrated that dynamic bacterial populations may still maintain stable performance in bioreactor treatment systems (Stamper et al., 2003; Fernandez et al., 1999). It is also possible that both microbial community structure and function were affected by the perturbation but function returned to its original state shortly, and our monthly sampling was not frequent enough to detect such changes. In a previous investigation of a pilot-scale denitrifying bioreactor, both function and community structure were disrupted by disturbances, but nitrogen removal recovered within a few days, indicating a high functional resilience (Gentile et al., 2006). It was suggested that flexible community structure and potentially the activity of minor members under nonperturbation conditions promotes system recovery. It remains unknown whether the adaptation and shift in the MBR microbial community influence other biological processes and stability of activated sludge at our study site.
5.
Conclusions
This represents the first report using cultivation-independent molecular approaches to elucidate the phylogenetic composition and diversity of the microbial communities in a fullscale MBR for municipal wastewater treatment. Our data have shown that total community bacteria and N-cycling groups in the MBR were constantly distinct from those in the parallelrunning CAS bioreactor, reflecting the contrasting environmental and operational conditions in the two treatment systems. The frequent detection of novel 16S rRNA and nosZ gene sequences in the clone libraries indicate the predominance and thus the potentially significant role of previously unrecognized bacteria in the carbon and nutrient removal processes. This study is an important step toward exploring the relationship between bacterial diversity and biogeochemical function within the MBR ecosystem.
Acknowledgements Li-Nan Huang was partially supported by the European Commission through a Marie Curie Fellowship (MIF1-CT-2005-
1137
021768). We thank G. Borgmans for technical supports and H. Paar for the DGGE analysis, and the two anonymous reviewers for providing thoughtful and constructive comments on the manuscript.
Appendix. Supplementary material Supplementary data related to this article can be found online at doi:10.1016/j.watres.2010.11.008.
references
Bond, P.L., Hugenholtz, P., Keller, J., Blackall, L.L., 1995. Bacterial community structures of phosphate-removing and nonphosphate-removing activated sludges from sequencing batch reactors. Applied and Environmental Microbiology 61, 1910e1916. Dojka, M.A., Hugenholtz, P., Haack, S.K., Pace, N.R., 1998. Microbial diversity in a hydrocarbon- and chlorinated-solvent contaminated aquifer undergoing intrinsic bioremediation. Applied and Environmental Microbiology 64, 3869e3877. Fenu, A., Roels, J., Wambecq, T., De Gussem, K., Thoeye, C., De Gueldre, G., Van De Steene, B., 2010. Energy audit of a full scale MBR system. Desalination 262, 121e128. Fernandez, A., Huang, S.Y., Seston, S., Xing, J., Hickey, R., Criddle, C., Tiedje, J., 1999. How stable is stable? Function versus community composition. Applied and Environmental Microbiology 65, 3697e3704. Gentile, M., Yan, T., Tiquia, S.M., Fields, M.W., Nyman, J., Zhou, J., Criddle, C.S., 2006. Stability in a denitrifying fluidized bed reactor. Microbial Ecology 52, 311e321. Ginige, M.P., Keller, J., Blackall, L.L., 2005. Investigation of an acetate-fed denitrifying microbial community by stable isotope probing, full-cycle rRNA analysis, and fluorescent in situ hybridization-microautoradiography. Applied and Environmental Microbiology 71, 8683e8691. Hagman, M., Nielsen, J.L., Nielsen, P.H., Jansen, J.la C, 2008. Mixed carbon sources for nitrate reduction in activated sludgeidentification of bacteria and process activity studies. Water Research 42, 1539e1546. Hallin, S., Pell, M., 1998. Metabolic properties of denitrifying bacteria adapting to methanol and ethanol in activated sludge. Water Research 32, 13e18. Hasselblad, S., Hallin, S., 1998. Intermittent addition of external carbon to enhance denitrification in activated sludge. Water Science and Technology 37, 227e233. Huang, L.N., De Wever, H., Diels, L., 2008. Diverse and distinct bacterial communities induced biofilm fouling in membrane bioreactors operated under different conditions. Environmental Science and Technology 42, 8360e8366. Huang, L.N., Zhou, H., Zhu, S., Qu, L.H., 2004. Phylogenetic diversity of bacteria in the leachate of a full-scale recirculating landfill. FEMS Microbiology Ecology 50, 175e183. Judd, S., 2007. The status of membrane bioreactor technology. Trends in Biotechnology 26, 109e116. Koops, H.P., Pommerening-Roser, A., 2001. Distribution and ecophysiology of the nitrifying bacteria emphasizing cultured species. FEMS Microbiology Ecology 37, 1e9. Lee, N., Jansen, J., Aspegren, H., Dircks, K., Henze, M., Schleifer, K. H., Wagner, M., 2002. Population dynamics and in situ physiology of phosphorus-accumulating bacteria in wastewater treatment plants with enhanced biological phoshorus removal operated with and without nitrogen removal. Water Science and Technology 46, 163e170.
1138
w a t e r r e s e a r c h 4 5 ( 2 0 1 1 ) 1 1 2 9 e1 1 3 8
Low, E.W., Chase, H.A., 1999. The effect of maintenance energy requirements on biomass production during wastewater treatment. Water Research 33, 847e853. Ludwig, W., Strunk, O., Westram, R., Richter, L., Meier, H., Yadhukumar Buchner, A., Lai, T., Steppi, S., Jobb, G., 2004. ARB: a software environment for sequence data. Nucleic Acids Research 32, 1363e1371. Luxmy, B.S., Nakajima, F., Yamamoto, K., 2000. Analysis of bacterial community in membrane separation bioreactors by fluorescent in situ hybridization (FISH) and denaturing gradient gel electrophoresis (DGGE) techniques. Water Science and Technology 41, 259e268. Manser, R., Gujer, W., Siegrist, H., 2005. Membrane bioreactor versus conventional activated sludge system: population dynamics of nitrifiers. Water Science and Technology 52, 417e425. Miura, Y., Hiraiwa, M.N., Ito, T., Itonaga, T., Watanabe, Y., Okabe, S., 2007. Bacterial community structures in MBRs treating municipal wastewater: relationship between community stability and reactor performance. Water Research 41, 627e637. Muller, E.B., Stouthamer, A.H., van Verseveld, H.W., Eikelboom, D. H., 1995. Aerobic domestic wastewater treatment in a pilot plant with complete sludge retention by cross-flow filtration. Water Research 29, 1179e1189. Nicolaisen, M.H., Ramsing, N.B., 2002. Denaturing gradient gel electrophoresis (DGGE) approaches to study the diversity of ammonia-oxidizing bacteria. Journal of Microbiological Methods 50, 189e203.
Nogueira, R., Melo, L.F., Purkhold, U., Wuertz, S., Wagner, M., 2002. Nitrifying and heterotrophic population dynamics in biofilm reactors: effects of hydraulic retention time and the presence of organic carbon. Water Research 36, 469e481. Schloss, P.D., Handelsman, J., 2005. Introducing DOTUR, a computer program for defining operational taxonomic units and estimating species richness. Applied and Environmental Microbiology 71, 1501e1506. Stamper, D.M., Walch, M., Jacobs, R.N., 2003. Bacterial population changes in a membrane bioreactor for graywater treatment monitored by denaturing gradient gel electrophoretic analysis of 16S rRNA gene fragments. Applied and Environmental Microbiology 69, 852e860. Throback, I.N., Enwall, K., Jarvis, A., Hallin, S., 2004. Reassessing PCR primers targeting nirS, nirK and nosZ genes for community surveys of denitrifying bacteria with DGGE. FEMS Microbiology Ecology 49, 401e417. Ueda, S., Earle, R.L., 1972. Microflora of activated sludge. Journal of General and Applied Microbiology 18, 239e248.