Nonlocal Continuum Field Theories
A. Cemal Eringen
SPRINGER
Nonlocal Continuum Field Theories
Springer New York He...
28 downloads
1294 Views
2MB Size
Report
This content was uploaded by our users and we assume good faith they have the permission to share this book. If you own the copyright to this book and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Start by pressing the button below!
Report copyright / DMCA form
Nonlocal Continuum Field Theories
A. Cemal Eringen
SPRINGER
Nonlocal Continuum Field Theories
Springer New York Heidelberg Barcelona Hong Kong London Milan Paris Singapore Tokyo
A. Cemal Eringen
Nonlocal Continuum Field Theories
With 72 Figures
A. Cemal Eringen Emeritus Professor, Princeton University 15 Red Tail Drive Littleton, CO 80126-5001 USA
Library of Congress Cataloging-in-Publication Data Eringen, A. Cemal. Nonlocal continuum field theories/A. Cemal. Eringen. p. cm. Includes bibliographical references and index. ISBN 0-387-95275-6 (alk. paper) 1. Field theory (Physics). 2. Continuum mechanics. I. Title. QC173.7.E76 2001 530–dc21
200102044
© 2002 Springer-Verlag New York, Inc. All rights reserved. This work may not be translated or copied in whole or in part without the written permission of the publisher (Springer-Verlag New York, Inc., 175 Fifth Avenue, New York, NY 10010, USA), except for brief excerpts in connection with reviews or scholarly analysis. Use in connection with any form of information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed is forbidden. The use of general descriptive names, trade names, trademarks, etc., in this publication, even if the former are not especially identified, is not to be taken as a sign that such names, as understood by the Trade Marks and Merchandise Marks Act, may accordingly be used freely by anyone. Production managed by Timothy Taylor; manufacturing supervised by Erica Bresler. Typeset by by TEXniques, Inc., Cambridge, MA. Printed and bound by Sheridan Books, Inc., Ann Arbor, MI. Printed in the United States of America. 9 8 7 6 5 4 3 2 1 ISBN 0-387-95275-6
SPIN 10833382
Springer-Verlag New York Berlin Heidelberg A member of BertelsmannSpringer ScienetBusiness Media GmbH
Preface
This book is devoted to the development of the nonlocal continuum field theories of material bodies where nonlocal intermolecular attractions are important. There exists a large class of problems in classical physics and continuum mechanics (classical field theories) that fall outside their domain of applications. Fracture of solids, stress fields at the dislocation core and at the tips of cracks, singularities present at the point of application of concentrated loads (forces, couples, heat, etc.), sharp corners and discontinuities in bodies, the failure in the prediction of short wavelength behavior of elastic waves, and several decades of the viscosity rise in fluids flowing in microscopic channels are but few major anomalies that defy classical treatment. In the field of electromagnetic theory, polaritons, gyrotropic effects, and superconductivity cannot be treated by the classical field theories. For example, several branches of high-frequency waves are not predicted and short wavelength regions deviate grossly from experimental observations. To cast light on the materials behavior in these areas, physicists often seek help from atomic lattice dynamics. The main purpose of this book is to present a unified foundation for the development of the basic field equations of nonlocal continuum field theories. To this end, we have relied on the natural extensions of the two fundamental laws of physics to nonlocality: (i) the energy balance law is postulated to remain in global form; and (ii) a material point of the body is considered to be attracted by all points of the body, at all past times. By means of these two natural generalizations of the corresponding local principles, theories of nonlocal elasticity, fluid dynamics, and electromagnetic field theories are formulated that include nonlocality in both space and time (memory-dependence).
vi
Preface
Solutions of the field equations are given for many critical problems in these fields, displaying unexpected favorable agreements with the atomic theories and/or the experimental observations. Presently, there exists no published treatise in this field, except some papers and limited reviews that are scattered in the literature. We believe this book offers rich material for research ideas in nonlocal solid and fluid mechanics, electromagnetic theory, and the nonlocal theories of media with microstructure and nonlocal theory of liquid crystals. It provides mathematical methods for the exploration of many failures of classical field theories and for the discoveries of new physical phenomena and/or explanations of the old ones. It can be used for graduate study in the departments of applied physics, applied mathematics, engineering sciences, and for research. We express our thanks to Jennifer Page who typed the nonmathematical parts of the manuscript. My daughter Meva who freed much time for me by undertaking many chores of life and life itself. To her goes my everlasting love. Littleton, Colorado December 2000
A. Cemal Eringen
Introduction
Nonlocal continuum field theories are concerned with the physics of material bodies whose behavior at a material point is influenced by the state of all points of the body. Following the classical notions, material points of a body are considered to be continuous and are assigned some physically independent objects (variables) (e.g., mass, charge, electric field, magnetic field). The state of the body, at a material point, is described by the relations of the response objects that constitute another class (e.g., stress, internal energy, heat) as functions of the independent objects. These relations are called constitutive equations. The nonlocal theory generalizes the classical field theory in two respects: (i) the energy balance law is considered valid globally (for the entire body); and (ii) the state of the body at a material point is described by the response functionals. This means that we need complete knowledge of the independent variables at all points of the body to describe the state of the body at each point. In this book the terminology of nonlocal field theories is to be understood in this sense. In fact, we have also included, in this description, nonlocality in time which is known as memory-dependence. As a subclass, the present definition includes gradient theories which possess limited nonlocality. Here various order gradients of the independent objects, at a material point and their time rates, enter into response functions at the same material points, Eringen [1966]. A third category of nonlocality involves constitutive ersatzs between the spatial statistical moments of dependent and corresponding sets of independent variables. Such a group of theories are known as director theories, micromorphic, microstretch, and micropolar theories. These theories are explored elsewhere, Eringen [1999], [2001].
viii
Introduction
The present book is devoted to the development of the nonlocal field theories described by the fundamental notions (i) and (ii) above. The question arises, why nonlocality? The domain of the applicability of classical field theories is intimately connected to the length and time scales. If L denotes the external characteristic length (e.g., crack length, wavelength, a length over which applied loads are smooth) and l the internal characteristic length (e.g., granular distance, lattice parameter), then in the region L/ l 1, classical field theories predict sufficiently accurate results. On the other hand, when L/ l ∼ 1, local theories fail and we must resort to either atomic or nonlocal theories that can account for the long-range interatomic attractions. For the dynamical case, there will be a similar scale T /τ where T is the external characteristic time (e.g., the time scale of the applied loads) and τ is the internal characteristic length (e.g., the time scale of transmission of signal from one molecule to the next). Again, classical theories fail when T /τ ∼ 1. Thus we see that the physical phenomenon in space–time requires nonlocality and memory effects scaled by L/ l and T /τ . The concept of nonlocality is inherent in solid state physics where the nonlocal attractions of atoms are prevalent. Here the material is considered to consist of discrete atoms connected by distant forces from other neighboring atoms. Hence, we expect relations between the nonlocal field theories and the lattice dynamics (see Section 6.9). Real materials do not resemble perfect crystal lattices or lattices with few imperfections (e.g., dislocations, foreign atoms, etc.) which enable a physicist to describe the state of the body. Unfortunately, amorphous and engineering materials do not lend themselves to such ideal descriptions, while nonlocal continuum theories make it possible to describe material properties very well. In fact, this description is faithful in microscopic scales all the way to the size of the lattice parameter (see Sections 6.10 to 6.17). Thus, nonlocal continuum theory should be considered a viable discipline in physics and applied science. Prior to the 1960s some elements of continuum theory had entered into the discussion of various physical phenomena that required mathematical descriptions in the forms of the integro-partial differential equations. For example, Chandrasekhar’s [1950] radiative transfer equation is of this type. Other historical references in this category are given in several articles in Continuum Physics, Vol. IV, edited by Eringen [1976]. The formulation of the nonlocal elastic constitutive equations by means of lattice dynamics, was given by Krumhansl [1965], [1968], Kröner and Datta [1966], and Kunin [1966]. The continuum approach to memory-dependent nonlocal elasticity was made by Eringen [1966] and to nonlocal micropolar elasticity by Eringen [1965]. These early theories did not include the aspect (i), namely, the global nature of the balance laws. This aspect along with the nonlocal constitutive equations was formulated by Eringen and Edelen [1972] and Eringen [1972a,b]. A review and development of the theory, and historic reference up to 1976, are contained in Continuum Physics, Vol. IV, edited by Eringen [1976].
Introduction
ix
The theory of nonlocal elasticity has attracted the attention of many writers, perhaps because of its early success in resolving an old problem in fracture mechanics. It is well known that classical elasticity predicts infinite stress at the tip of a sharp crack. This led researchers to invent several fracture criteria (e.g., Griffith, fracture toughness, energy release rate, J -integral, etc.) independent of the state of stress at the tip of a crack. The nonlocal elasticity solution of Eringen and Kim [1974a,b] and Eringen et al. [1977] showed that the stress at the tip of a crack is finite, it rises to a maximum and then diminishes with the distance from the crack tip (cf. Section 6.14). Similarly, the nonlocal solution of the discreet dislocation problem (Eringen [1977a,b]) leads to vanishing stress at the eye of the dislocation, rising to a maximum in the interior of the body and approaches the classical solution with the distance. These results led to the introduction of a natural fracture criterion, based on the maximum stress hypothesis and the accurate prediction of the cohesive stress (cf. Sections 6.12 to 6.17). Moreover, nonlocal solutions also lead to dispersion relations for harmonic waves that are faithful to the lattice dynamical results throughout the entire Brillouin zone. The nonlocal continuum theory of fluent media, including the microstructural effects, were discussed by Eringen [1972b], [1973b], applications to turbulence by Speziale and Eringen [1981], the diffusion of gases by Demiray and Eringen [1978], and magnetohydrodynamics by Eringen [1986]. McCay and Narasimhan [1981] discussed theory of nonlocal electromagnetic fluids, and Narasimhan and McCay [1981] applied their theory to dispersive waves in dielectric fluids. Eringen [1973c], [1984a], [1984b], [1984c], [1986], [1990], [1991] introduced the theories of nonlocal electromagnetic elastic solids and gave solutions of several problems: point charges, optical waves, polaritons, Eddy currents, gyrotropic media, superconductivity, Alfven waves, etc. A book by Agranovich and Ginsburg [1984] covers many aspects of the nonlocal effects on crystal optics. The nonlocality here appears under the terminology of “Spatial Disperson." In spite of its age, the literature on nonlocal field theories is not extensive. There exist several reviews, conference symposia, and reports. Among them we mention: Continuum Physics, Vol. IV, edited by A.C. Eringen, Academic Press, 1976. This book contains accounts of the polar and nonlocal polar theories of elastic solids. Nonlocal Theories of Material Media, The Polish Academy, 1976. This book contains reviews on nonlocal elasticity. Nonlocal Theory of Material Media, CISM Courses and Lectures, No. 268, edited by D. Rogula, Springer-Verlag, 1982. Here, lattice defects, nonlocal elasticity, and some soluble problems are discussed by several authors. Elastic Media with Microstructure, Vols. I and II, by I.A. Kunin, Springer-Verlag, 1982/1983. In these books the lattice dynamical approach is employed for the discussion of microstructural problems.
x
Introduction
Mechanics, Electromagnetic Materials, and Structures, AMD, Vol. 61, MD-Vol. 42, edited by J.S. Lee, G.A. Maugin, and Y. Shindo, American Society of Mechanical Engineers, 1993. This is a collection of papers presented at a scientific meeting. The articles are mostly in classical fields, except one article entitled “Vistas of Nonlocal Electrodynamics" by Eringen. EUROMECH Colloquium, Vol. 378, Mulhouse, France 20–22, April 1998, organized and published by Universite de Mulhouse CNRS-CSI. This report contains several articles on micromechanics, nonlocal elasticity, and the solutions of some problems. Report No. 39 by E.S. Suhubi, ¸ March 1987. This report was used for the lectures by Professor Suhubi ¸ at the University of Calgary Canada. I am indebted to Professor Suhubi ¸ for sending me a copy of this report. The unified formulation of the theories presented in this book is new and has not appeared before in the literature. The solutions to a plethora of problems are based mostly on the author’s, and his collaborator’s, work. References to these and works of other authors appear in the appropriate sections. It is not feasible to make a comprehensive survey of the fields that include all the published work. Needless to say, there are many other published works that may have escaped my attention. For this failure, I express my apologies to those authors whose work I missed to give credit. The main purpose of this book is to present a unified approach to the formulations of the nonlocal field theories for memory-dependent elastic solids, viscous fluids, electromagnetic solids, and fluids that conduct heat. Nonlocal balance laws are obtained by using the axiom of the Galilean invariance of the energy balance law (Chapter 2). Nonlocal constitutive equations are then constructed, based on some postulates and the thermodynamic conditions of admissibility. The resulting equations are nonlinear and include memory and nonlocality. Chapter 3 presents the constitutive equations of nonlinear, nonlocal, memory-dependent thermoelastic solids, and thermoviscous fluids. In Chapter 4, we obtain the nonlocal balance laws of the electromagnetic theory and in Chapter 5 the constitutive equations of nonlinear, nonlocal, memory-dependent electromagnetic thermoelastic solids and thermoviscous fluids. In principle, the basic formulations are now complete. In Chapter 6 on nonlocal elasticity, we begin to develop the linear theories and we present a multitude of applications to the theory of different fields. The solutions of some critical problems show unequivocally the power and potential of the nonlocal theory. For example, the stress field at the core of a discrete dislocation tends to vanish, reaching a maximum outside the core of dislocation. When this maximum is equated to the cohesive stress that holds the atomic bonds together, we obtain the celebrated Griffith criterion. Alternatively, we are able to predict the cohesive stress exactly, by setting the internal characteristic length to the one based on phonon dispersion (cf. Sections 6.10 to 6.14). The solution of the crack problems, rigid stamp on a half-plane leads us to a Griffith-like fracture criterium
Introduction
xi
with a Griffith constant determined. The crack-tip singularity prevalent in the classical solution is eliminated by the nonlocal solution. The dispersion relations of the plane harmonic waves in nonlocal elasticity are identical to those obtained in lattice dynamics, throughout the entire Brillouin zone. The nonlocal fluid dynamics problems treated in Section 7.3 clearly display the nonlocal effects on the mean viscosity. The nonlocal linear electromagnetic theory, presented in Chapter 8, explains the nature of the dielectric tensor with regard to longitudinal and transverse electromagnetic waves, in perfect accord with lattice dynamics. Optical waves, polaritons, Eddy currents, gyrotorpic media, and Alfven waves and their dispersive characters are explained. Remarkably enough, we are able to construct a general theory of superconductivity that includes nonlocality similar to the one proposed by Pippard [1965] in a completely different way. Memory-dependent nonlocal thermoelastic solids, thermofluids, electromagnetic elastic solids, and electromagnetic thermofluids are the subjects of Chapters 9 to 12. With Chapter 13, we begin to develop the theory of nonlocal micromorphic thermoelastic solids, microstretch thermoelastic solids, and micropolar thermoelastic solids. The uniqueness and reciprocal theorem are given. Variational principles are presented and several problems solved. Here the solution of the plane harmonic waves in nonlocal elastic solids leads to four branches of the dispersion curves with a faithful representation in the entire Brillouin zone to those known atomic lattice dynamics (see Section 13.15). The field equations of memory-dependent nonlocal micropolar electromagnetic elastic solids are obtained in Chapter 14. Finally, in Chapter 15, we present a nonlocal electromagnetic continuum theory of liquid crystals. Nonlocal field theories contain very interesting physics, in fact, all physics, excluding quantum effects and elementary particle physics. This can be extended further to include the nonlocal mixture theory, diffusion, and other allied phenomena (Eringen [1998a]). It could provide bases for rheological, biological, and neural systems. It is my hope that future generations will continue on this path as the destination offers great rewards and is very rich in the world of science.
This page intentionally left blank
Contents
Preface
v
Introduction 1 Motion and Deformation 1.0 Scope . . . . . . . . . . . . . 1.1 Motion . . . . . . . . . . . . . 1.2 Strain Measures and Rotations 1.3 Strain Invariants . . . . . . . . 1.4 Time-Rate of Tensors . . . . . 1.5 Objective Tensors . . . . . . . 1.6 Compatibility Conditions . . . Problems . . . . . . . . . . . . . .
vii
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
1 . 1 . 1 . 5 . 7 . 8 . 10 . 12 . 14
2 Stress 2.0 Scope . . . . . . . . . . . . . . 2.1 Balance of Energy . . . . . . . . 2.2 Second Law of Thermodynamics 2.3 Dissipation Potential . . . . . . Problems . . . . . . . . . . . . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
15 15 15 24 26 29
3 Constitutive Equations 31 3.0 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 3.1 Constitutive Axioms . . . . . . . . . . . . . . . . . . . . . . . . 31
xiv
Contents
3.2 Memory-Dependent Nonlocal Thermoelastic Solids . . . . . . . . 38 3.3 Memory-Dependent Nonlocal Thermofluids . . . . . . . . . . . . 43 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 4 Nonlocal Electromagnetic Theory 4.0 Scope . . . . . . . . . . . . . . . . . . . . 4.1 Electromagnetic Balance Laws . . . . . . . 4.2 Electromagnetic Force, Couple, and Power . 4.3 Electromagnetic Force, Couple, and Power . 4.4 Mechanical Balance Laws . . . . . . . . . Problems . . . . . . . . . . . . . . . . . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
49 49 49 53 55 56 59
5 Constitutive Equations of Nonlocal Electromagnetic Media 5.0 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1 Electromagnetic Thermoelastic Solids . . . . . . . . . . 5.2 Electromagnetic Thermoviscous Fluids . . . . . . . . . . Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
. . . .
. . . .
. . . .
. . . .
61 61 62 66 70
6 Nonlocal Linear Elasticity 6.0 Scope . . . . . . . . . . . . . . . . . . . . . . . . 6.1 Linear Constitutive Equations . . . . . . . . . . . 6.2 Lattice Dynamical Foundations of Linear Elasticity 6.3 Material Stability . . . . . . . . . . . . . . . . . . 6.4 Field Equations of Nonlocal Linear Elasticity . . . 6.5 Uniqueness Theorem . . . . . . . . . . . . . . . . 6.6 Power and Energy . . . . . . . . . . . . . . . . . . 6.7 Reciprocal Theorem . . . . . . . . . . . . . . . . . 6.8 Variational Principles . . . . . . . . . . . . . . . . 6.9 Approximate Models . . . . . . . . . . . . . . . . 6.10 Screw Dislocation . . . . . . . . . . . . . . . . . . 6.11 Edge Dislocation . . . . . . . . . . . . . . . . . . 6.12 Dislocation in Nonlocal Hexagonal Elastic Solids . 6.13 Continuous Distribution of Dislocations . . . . . . 6.14 Nonlocal Stress Field at the Griffith Crack . . . . . 6.15 Line Crack Subject to Shear . . . . . . . . . . . . 6.16 Interaction of a Dislocation with a Crack . . . . . . 6.17 Interaction Between Defects and Dislocation . . . . 6.18 Straight Wedge Disclination . . . . . . . . . . . . 6.19 Somigliana-Type Representation . . . . . . . . . . 6.20 Fundamental Solution . . . . . . . . . . . . . . . . 6.21 Nonlocal Elastic Half-Plane . . . . . . . . . . . . 6.22 Rigid Stamp on a Nonlocal Elastic Half-Space . . . Problems . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
71 71 73 78 82 82 87 91 93 95 98 106 112 116 123 132 138 144 153 161 164 165 166 171 175
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
Contents
xv
7 Nonlocal Fluid Dynamics 7.0 Scope . . . . . . . . . . . . . . . . . . . . . 7.1 Constitutive Equations . . . . . . . . . . . . 7.2 Field Equations of Nonlocal Fluid Dynamics 7.3 Channel Flow . . . . . . . . . . . . . . . . . 7.4 Lubrication in Microscopic Channels . . . . . 7.5 Lubricant Film Flow on a Rotating Disk . . . Problems . . . . . . . . . . . . . . . . . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
177 177 178 179 181 183 189 192
8 Nonlocal Linear Electromagnetic Theory 8.0 Scope . . . . . . . . . . . . . . . . . . 8.1 Balance Laws . . . . . . . . . . . . . . 8.2 Nonlocal Electromagnetic Elastic Solids 8.3 Electromagnetic Solid Media . . . . . . 8.4 Models for the Dielectric Tensor . . . . 8.5 Point Charge . . . . . . . . . . . . . . 8.6 Optical Waves . . . . . . . . . . . . . . 8.7 Polaritons . . . . . . . . . . . . . . . . 8.8 Eddy Currents . . . . . . . . . . . . . . 8.9 Gyrotropic Media . . . . . . . . . . . . 8.10 Superconductivity . . . . . . . . . . . . 8.11 Nonlocal Theory . . . . . . . . . . . . 8.12 Alfven Waves . . . . . . . . . . . . . . Problems . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
193 193 194 195 199 200 204 205 206 209 210 212 214 220 221
9 Memory-Dependent Nonlocal Thermoelastic Solids 9.0 Scope . . . . . . . . . . . . . . . . . . . . . . . 9.1 Linear Constitutive Equations . . . . . . . . . . 9.2 Boundary-Initial Value Problems . . . . . . . . . Problems . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
223 223 223 228 229
10 Memory-Dependent Nonlocal Fluids 10.0 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.1 Nonlocal Thermoviscous Fluids . . . . . . . . . . . . . 10.2 Field Equations of Memory-Dependent Nonlocal Fluids . Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
. . . .
. . . .
. . . .
. . . .
231 231 231 234 235
11 Memory-Dependent Nonlocal E-M Elastic Solids 11.0 Scope . . . . . . . . . . . . . . . . . . . . . 11.1 Linear Constitutive Equations . . . . . . . . 11.2 Field Equations . . . . . . . . . . . . . . . . Problems . . . . . . . . . . . . . . . . . . . . . .
. . . .
. . . .
. . . .
. . . .
. . . .
237 237 237 243 245
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
12 Memory-Dependent Nonlocal E-M Thermofluids 247 12.0 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247 12.1 Constitutive Equations . . . . . . . . . . . . . . . . . . . . . . . 247 Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252
xvi
Contents
13 Nonlocal Microcontinua 13.0 Scope . . . . . . . . . . . . . . . . . . 13.1 Kinematical Preliminaries . . . . . . . 13.2 Time-Rate of Tensors . . . . . . . . . . 13.3 Mass, Inertia, Kinetic Energy . . . . . . 13.4 Stress, Stress Moments, Energy Balance 13.5 Balance Laws . . . . . . . . . . . . . . 13.6 Second Law of Thermodynamics . . . . 13.7 Micromorphic Elastic Solids . . . . . . 13.8 Microstretch Elastic Solids . . . . . . . 13.9 Micropolar Elastic Solids . . . . . . . . 13.10Nonlocal Micropolar Elasticity . . . . . 13.11Uniqueness Theorem . . . . . . . . . . 13.12Reciprocal Theorem . . . . . . . . . . . 13.13Variational Principles . . . . . . . . . . 13.14Nonlocal Micropolar Moduli . . . . . . 13.15Propagation of Plane Waves . . . . . . 13.16Displacement Potentials . . . . . . . . . 13.17Two Vector Fields . . . . . . . . . . . . 13.18Fundamental Solutions . . . . . . . . . Problems . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
253 253 254 261 264 267 271 276 278 286 293 296 301 306 308 311 316 320 321 323 324
14 Memory-Dependent Nonlocal E-M Elastic Solids 14.0 Scope . . . . . . . . . . . . . . . . . . . . . 14.1 Constitutive Equations of E-M Elastic Solids 14.2 Field Equations . . . . . . . . . . . . . . . . Problems . . . . . . . . . . . . . . . . . . . . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
325 325 325 335 336
15 Nonlocal Continuum Theory of Liquid Crystals 15.0 Scope . . . . . . . . . . . . . . . . . . . . . . . . 15.1 Description of Liquid Crystals . . . . . . . . . . . 15.2 Balance Laws . . . . . . . . . . . . . . . . . . . . 15.3 Nonlocal E-M Liquid Crystals . . . . . . . . . . . 15.4 Constitutive Equations of Nematic Liquid Crystals 15.5 Field Equations . . . . . . . . . . . . . . . . . . . Problems . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
337 337 337 340 340 343 347 349
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
Appendix A
351
References
357
Index
365
Errata
375
1 Motion and Deformation
1.0 Scope This chapter is devoted to discussions of the kinematics of continuous media. In Section 1.1 we present the motion of a material point X in the body as a oneparameter mapping from X to a spatial point x. The inverse motion is the inverse one-to-one mapping from x to X. Deformation gradients are introduced and used to determine area and volume changes with the deformation. In Section 1.2 we introduce material and spatial strain measures and obtain their expressions in terms of the displacement vector. Section 1.3 gives a short account of strain invariants. In Section 1.4 we obtain the time-rate of deformation gradients, deformation tensors, area and volume changes with deformation, which are relevant to the dynamics of continua. Section 1.5 discusses the principle of objectivity, fundamental to the constitutive theory. Compatibility conditions are obtained in Section 1.6. This chapter is fundamental to the mathematical developments presented in later chapters.
1.1 Motion A material body B is a collection of material particles with a volume V and surface S, embedded in Euclidean space E 3 . As a reference frame, we employ Cartesian coordinates XK , K = 1, 2, 3, or P = X, at the reference state, at time t = 0, to locate a particle P in V (Figure 1.1.1). At a later time, t, the body may occupy a new configuration b in space, with P now located at p with position vector p = x or Cartesian coordinates xk . The coordinate system XK and xk may be selected to have different origins and orientations.
2
1 Motion and Deformation
The motion of the point P ∈ B to p ∈ b, at time t, is described by the mapping xk = xk (X1 , X2 , X3 , t)
or
xk = xk (X, t),
k = 1, 2, 3,
(1.1.1)
and the inverse motion by XK = Xk (x1 , x2 , x3 , t)
or
XK = XK (x, t).
(1.1.2)
For brevity we also express these in the forms x = x(X, t),
X = X(x, t).
(1.1.3)
Thus, according to (1.1.1), the motion takes a material particle P ∈ B at time t = 0, to a spatial position p ∈ b at time t. The inverse motion (1.1.2) states the converse. We assume that the mappings (1.1.3) are single valued and that they possess continuous partial derivatives with respect to their arguments. Moreover, they are a unique inverse of each other. This is guaranteed by ∂xk > 0, (1.1.4) J ≡ det ∂XK where J is the Jacobian determinant. If we determine the spatial position xk , of every point XK ∈ B at time t, we will know the new shape and the position of the body at each time t relative to that at t = 0. Thus, the theory of continuous media deals, in essence, with the determination of (1.1.1) given the initial data at t = 0 and the bounary data. Through the equations of motion (1.1.3) we have dxk = xk,K dXK ,
dXK = XK,k dxk .
(1.1.5a)
Alternatively, dP = ck dxk , ck (x, t) ≡ XK,k IK ,
dp = CK dXK , CK (X, t) ≡ xk,K ik ,
(1.1.5b)
where IK and ik are Cartesian base vectors (Figure 1.1.1). Here, and henceforth, repeated indices denote summation over the range of summed indices and an index following a comma denotes the partial derivative, e.g., xk,K ≡
∂xk , ∂XK
XK,k ≡
∂XK . ∂xk
(1.1.6)
These two sets of quantities, defined by (1.1.6), are called deformation gradients. Sometimes (1.1.6) is also denoted by F = ∇ x,
FkK ≡ xk,K .
(1.1.7)
1.1 Motion
3
Figure 1.1.1. Coordinate systems. In this case (1.1.6)2 is expressed as F−1 . Through the chain rule of differentiation, we have xk,K XK,l = δkl ,
XK,k xk,L = δKL .
(1.1.8)
Each of the nine quantities xk,K or XK,k can be solved from either of these linear equations. Using the Cramer rule of determinants we can determine XK,k in terms of xk,K : 1 1 XK,k = cofactor xk,K = (1.1.9) εKLM klm xl,L xm,M , J 2J where KLM and klm are the permutation symbols and J = det xk,K = 16 KLM klm xk,K xl,L xm,M .
(1.1.10)
By differentiation (1.1.10), we obtain (J XK,k ),K = 0, (J −1 xk,K ),k = 0, ∂J = cofactor xk,K = J XK,k . ∂(xk,K )
(1.1.11) (1.1.12)
From (1.1.5b) it can be seen that C1 dX1 , C2 dX2 , and C3 dX3 represent the edge vectors of a parallelepiped built on the vectors dp and c1 dx1 , c2 dx2 , and c3 dx3 on that built on dP (Figure 1.1.2). Consequently, the area vector for the surface, built on edge vectors C1 dX1 and C2 dX2 , is given by da3 = C1 × C2 dX1 dX2 , which is the deformed image of the area dA3 based on I1 dX1 and I2 dX2 , i.e., dA3 = dX1 dX2 . Thus, da3 = C1 × C2 dX1 dX2 = xk,1 , xl,2 ik × il dX1 dX2 .
(1.1.13)
4
1 Motion and Deformation
Figure 1.1.2. (a) Deformation of a parallelepiped (Lagrangian representation); (b) A rectangular parallelepiped in the deformed body was a rectilinear one in undeformed body (Eulerian representation).
Similar expressions are obtained for da1 and da2 so that an element of the area vector is given by da = da1 + da2 + da3 = J XK,k dAK ik
(1.1.14)
1.2 Strain Measures and Rotations
5
and (da)2 = J 2 XK,k XL,l dAK dAL .
(1.1.15)
By taking the inner product of da3 with C3 dX3 , we obtain the deformed volume element dv = J dV . (1.1.16)
1.2 Strain Measures and Rotations Elements of arc lengths dS and ds, in reference and spatial configurations B and b, are, respectively, given by dS 2 = dXK dXK ,
ds 2 = dxk dxk .
(1.2.1)
Upon using (1.1.5) in these expressions we obtain dS 2 = ckl dxk dxl ,
ds 2 = CKL dXK dXL ,
(1.2.2)
where ckl (x, t) = δKL XK,k XL,l = XK,k XK,l , CKL (X, t) = δkl xk,K xl,L = xk,K xk,L ,
(1.2.3) (1.2.4)
are, respectively, the Cauchy deformation tensor and the Green deformation tensor. Both of these tensors are symmetric tensors, i.e., CKL = CLK , ckl = clk . Sometimes also used are the inverse of these tensors: −1 c kl −1 C KL
≡ bkl = δKL xk,K xl,L ,
(1.2.5)
≡ BKL = δkl XK,k XL,l ,
(1.2.6)
which are known, respectively, as the Finger and Piola deformation tensors. Note that ckr brl = δkl , CKR BRL = δKL . (1.2.7) Using (1.2.1) and (1.2.2) we have ds 2 − dS 2 = 2EKL (X, t) dXK dXL = 2ekl (x, t) dxk dxl ,
(1.2.8)
where 2EKL = CKL (X, t) − δKL ,
2ekl = δkl − ckl (x, t),
(1.2.9)
are known as the Lagrangian and Eulerian strain tensors, respectively. From (1.2.8) it follows that EKL = ekl xk,K xl,L ,
ekl = EKL XK,k XL,l .
(1.2.10)
6
1 Motion and Deformation
An alternative way of introducing the deformation tensors is through the Cauchy decomposition theorem which states that a matrix F may be decomposed as products of two matrices, one of which is orthogonal and the other is a symmetric tensor. For the proof, see Eringen [1967, p. 42] or [1980, p. 46]. Thus, F = RU = VR, with U2 = FT F = C,
(1.2.11) −1
V2 = FFT = c = b,
(1.2.12)
where a superscript T denotes transpose. Here R is orthogonal. This is the rotation tensor. U and V are called the right and left stretch tensors. Commensurate with this terminology, C and b are also called the right and left Cauchy–Green deformation tensors. We may express the strain components in terms of the displacement vector u, which extends from P to p (Figure 1.1.1): u = x − X + 0.
(1.2.13)
Here 0 is the vector connecting the origin of the coordinate frames. Substituting (1.2.13) into (1.2.3) and (1.2.4), we obtain 2EKL = CKL − δKL = UK,L + UL,K + δMN UM,K UN,L , 2ekl = δkl − ckl = uk,l + ul,k − δmn um,k un,l ,
(1.2.14) (1.2.15)
where we employed u = UL IL = ul il ,
(1.2.16)
with UL representing the component of u in the reference frame B, and ul representing those in the spatial frame b. KL and KL and The linear strain tensors E ekl , and the linear rotation tensors R rkl , are introduced by KL = 1 (UK,L + UL,K ) ≡ U(K,L) , E ekl = 21 (uk,l + ul,k ) ≡ u(k,l) , 2 KL = 1 (UK,L − UL,K ) ≡ U[K,L] , R rkl = 21 (uk,l − ul,k ) ≡ u[k,l] , 2
(1.2.17)
where subscript parentheses enclosing indices denote the symmetric part of the indices enclosed and brackets denote the antisymmetric part. In three-dimensional space an antisymmetric tensor can be represented by an axial vector so that 2 rk = klm rml ,
ML . K = KLM R 2R
(1.2.18)
K represents the linear rotation vectors. The finite rotation vectors Here rk and R follow from (1.2.11): R = FU−1 = V−1 F. (1.2.19)
1.3 Strain Invariants
1.3
7
Strain Invariants
From (1.2.2) we have 2(n) ≡
ds dS
2 = CKL NK NL ,
NK =
dXK , dS
(1.3.1)
where (n) is called the stretch. But through (1.2.1), NK is subject to δKL NK NL = 1.
(1.3.2)
The stationary value of the stretch is obtained by differentiating 2(n) : ∂ [CKL NK NL − C(δKL NK NL − 1)] = 0, ∂NM
(1.3.3)
where C is a Lagrange multiplier. This gives three linear equations (CKL − CδKL )NL = 0.
(1.3.4)
The solution for N may exist if the characteristic determinant vanishes, i.e., det(CKL − CδKL ) = 0.
(1.3.5)
Expansion of this determinant gives −C 3 + IC C 2 − IIC C + IIIC = 0,
(1.3.6)
where IC = CKK ,
2 − C2 − C2 , IIC = C11 C22 + C22 C33 + C33 C11 − C12 23 31 IIIC = det CKL , (1.3.7) are the invariants of the deformation tensor CKL . The characteristic equation (1.3.6) possesses three roots Cα , α = 1, 2, 3, called the eigenvalues of CKL . It can be shown that Cα are real, and the proper directions N1 and N2 corresponding to any two proper numbers C1 and C2 , are orthogonal. We note that three other sets of invariants related to (1.3.7) exist, e.g.,
I1 = tr C,
I2 = tr C2 ,
I3 = tr C3 ,
(1.3.8)
with relations I1 = IC ,
2 − 2II , I2 = IC C
3 − 3I II + 3III , I3 = IC C C C
IC = I1 ,
IIC = 21 (I12 − I22 ),
IIIC = 16 (2I3 − 3I1 I2 + I13 ).
(1.3.9)
For the proofs of these and other related interesting topics, see Eringen [1967 or 1980, Section 1.10].
8
1 Motion and Deformation
1.4 Time-Rate of Tensors Definition 1. The material time-rate of a function f (x, t) is defined by ∂f Df ˙ , = f = Dt ∂t X
(1.4.1)
where the subscript X accompanying a bar denotes that X is held constant. If f = f (X, t), then ∂f (X, t) . (1.4.2) f˙ = ∂t If f = f (x, t), then Df ∂f ∂f f˙ = x˙k . (1.4.3) = + Dt ∂t ∂xk For example, the velocity vector v and the acceleration vector a are defined by v=
∂x(X, t) = x˙ , ∂t
a = v˙ =
∂ 2 x(X, t) . ∂t 2
(1.4.4)
If we substitute X = X(x, t) into v, we obtain v(X(x, t), t) ≡ vˆ (x, t).
(1.4.5)
In this case, vˆ represents the velocity of a material point at x. However, the identity of the particle at x is not known. For the acceleration of a material point x we have ∂ vˆ + vˆ ,k vˆk . a = v˙ˆ = ∂t Henceforth, we drop the circumflex (ˆ) for brevity and express this as a = v˙ =
∂v Dv = + v,k vk . Dt ∂t
(1.4.6)
Lemma 1. The material derivative of xk,K is given by D (xk,K ) = vk,l xl,K Dt
or
D (dxk ) = vk,l dxl . Dt
(1.4.7)
The proof of this follows from the fact that the operators D/Dt and ∂/∂XK commute. Corollary. The material derivative XK,k is given by D (XK,k ) = −XK,l vl,k . Dt
(1.4.8)
1.4 Time-Rate of Tensors
9
This result follows from differentiating XK,k xk,L = δK,L and using (1.4.7). Theorem 1. The material time derivative of the deformation tensor CKL is given by C˙ KL = 2dkl xk,K xl,L , (1.4.9) where dkl (called the deformation-rate tensor) is defined by dkl = 21 (vk,l + vl,k ).
(1.4.10)
This is obtained by differentiating (1.2.4) and using (1.4.7). Theorem 2 (Killing). The necessary and sufficient condition for the motion of a body to be locally rigid is dkl = 0. Proof . For rigid motions we must have D (ds 2 ) = 0. Dt Using (1.2.2)2 and (1.4.9), this gives D (ds 2 ) = 2dkl dxk dxl = 0. Dt
(1.4.11)
This must be true for every pair of points in the body, i.e., for arbitrary dx. Hence, we must have dkl = 0. The deformation-rate tensor d is fundamental to the development of the constitutive equations of the fluent media. Lemma 2. The material time derivative of the Jacobian is given by DJ = J vk,k . Dt
(1.4.12)
Proof . We have DJ D ∂J ∂J D(xk,K ) = (det xk,K ) = = vk,l xl,K , Dt Dt ∂(xk,K ) Dt ∂(xk,K ) where we used (1.4.7). But according to (1.1.12): ∂J = J XK,k . ∂(xk,K ) Hence, there follows (1.4.12).
10
1 Motion and Deformation
Definition 2. Spin tensor wkl is defined by wkl = v[k,l] = 21 (vk,l − vl,k ).
(1.4.13)
From (1.4.10) and (1.4.13), by addition, we obtain vk,l = dkl + wkl .
(1.4.14)
Equivalent to the spin tensor is the vorticity vector wk defined by wk = klm wml = klm vm,l
or
w ≡ curl v.
(1.4.15)
Theorem. The material time derivative of the element of area is given by D (dak ) = vr,r dak − vr,k dar . Dt
(1.4.16)
To prove this we calculate the material derivative of (1.1.14): D DJ D (J XK,k dAK ) = XK,k + J (XK,k ) dAK . Dt Dt Dt
Upon using (1.4.8) and (1.4.12) we obtain (1.4.16). Similarly, from (1.1.16) and (1.4.12), it follows that D (dv) = ∇ · v dv. Dt
(1.4.17)
1.5 Objective Tensors It is intuitively clear that the material properties of a body, measured in a rigidly moving frame of references, must remain unaltered. In the formulation of the response functions, it is desirable to employ quantities that are independent of the motion of the observer. Such quantities are called objectives or material frame-indifferent. Definition 1. Two motions xk (X, t) and xk (X, t) are called objectively equivalent if and only if xk (X, t) = Qkl (t)xl (X, t) + bk (t),
t = t − a,
(1.5.1)
where a is a constant time-shift, b(t) is a time-dependent translation, and {Q(t)} are time-dependent full orthogonal transformations, i.e., Qkl Qml = Qlk Qlm = δkm ,
det Qkl = ±1.
(1.5.2)
Here, Qkl consists of all rigid rotations det Q = +1, and inversions det Q = −1.
1.5 Objective Tensors
11
Two objectively equivalent motions differ only in the relative frame and time. For a fixed frame and time the two motions may be made to coincide by a superposition of an arbitrary rigid motion and a shifting origin of time. Definition 2 (Objectivity). Any tensorial quantity that obeys the tensor transformation law under (1.5.1) is called objective or material frame-indifferent. For example, a vector qk and a tensor tkl are objective since they obey the transformation laws t) = Qkl (t)ql (X, t), qk (X, tkl (X, t) = Qkm (t)Qln (t)tmn (X, t).
(1.5.3)
Vectors and tensors that do not depend on time are objective. For time-dependent vectors and tensors this is not always true. Consider, for example, the velocity vector v = x˙ . From (1.5.1), we have D xk ˙ kl xl + b˙k , = Qkl x˙l + Q Dt or
(1.5.4) ˙ kl xl + b˙k . vk = Qkl vl + Q
This is not in the form (1.5.3)1 . Hence the velocity vector is not objective. The same is also true for the acceleration vector. Theorem. The deformation-rate tensor dkl is objective but the spin tensor wkl is not objective. Proof . From (1.5.4) we have vk,l = Qkm vm,n
∂xn ˙ km ∂xm . +Q ∂ xl ∂ xl
(1.5.5)
xl we solve for xn from (1.5.1), by multiplying it by Qkn and To calculate ∂xn /∂ using (1.5.2): xn = Qkn ( xk − bk ). Thus
∂xn = Qln . ∂ xl
(1.5.6)
Substituting this in (1.5.5) we obtain ˙ km Qlm . vk,l = Qkm Qln vm,n + Q
(1.5.7)
Interchanging the indices k and l and adding, we obtain dkl = Qkm Qln dmn ,
(1.5.8)
12
1 Motion and Deformation
where we used
˙ km Qlm + Qkm Q ˙ lm = 0, Q
(1.5.9)
which follows from (1.5.2). Equation (1.5.8) shows that dkl is an objective tensor. Upon using (1.5.7), for the spin tensor we obtain w kl = Qkm Qln wmn + kl ,
(1.5.10)
where kl is the relative angular velocity of the two frames, defined by ˙ km Qlm . kl ≡ Q Equation (1.5.10) indicates that the spin tensor is not objective.
(1.5.11)
1.6 Compatibility Conditions According to (1.2.15) the six components of ckl and ekl are expressed in terms of the three components of the displacement vector uk , i.e., 2ekl = δkl − ckl = uk,l + ul,k − δmn um,k un,l .
(1.6.1)
When the displacement vector possesses a continuous partial derivative, by substituting u into this equation we can calculate ekl and ckl . On the other hand, if ekl or ckl is given, is it possible to obtain single-valued continuous displacement fields corresponding to ekl and ckl ? This statement poses a question for the integrability of the six partial differential equations (1.6.1). This is answered by a theorem of Riemann. To prepare for this theorem, we recall expressions (1.2.1) and (1.2.2) of the elements of arc lengths, namely, dS 2 = δKL dXK dXL = ckl dxk dxl , ds 2 = CKL dXK dXL = δkl dxk dxl .
(1.6.2)
Both the deformed and undeformed bodies are embedded in a Euclidean three-dimensional space. Thus, if we consider the motion xk = xk (X1 , X2 , X3 , t), k = 1, 2, 3, as a coordinate transformation from the rectangular coordinates XK to the curvilinear coordinates xk at a fixed time, then ckl plays the role of a metric tensor in the curvilinear coordinates xk , and the same is valid for CKL for the inverse motion. Now in Euclidean space, any six quantities ckl cannot be a metric tensor, unless they satisfy a theorem of Riemann, namely: For a symmetric tensor akl to be a metric tensor for a Euclidean space, it is necessary and sufficient that akl be a nonsingular, positive-definite tensor, and the (a) Riemann–Christoffel tensor Rklmn formed from it vanishes identically.1 1 See Appendix A.
1.6 Compatibility Conditions
13
(a)
Rklmn ≡ 21 (akn,lm + alm,kn − akm,ln − aln,km ) −1
+ a rs ([lm, s][kn, r] − [ln, s][kn, r]),
(1.6.3)
where [kl, m] ≡ 21 (akm,l + alm,k − akl,m ), −1 a ns
−1
asl = ans a sl = δnl .
(1.6.4)
Both CKL and ckl are nonsingular symmetric, positive-definite tensors of the Euclidean three-dimensional space. Hence, we must have2 (C)
RKLMN = 0,
(c)
Rklmn = 0.
(1.6.5)
Of the 81 components of each of these tensors only six are algebraically independent and nonvanishing. By substituting C and c for a in (1.6.5) we obtain the compatibility conditions for CKL and ckl or EKL and ekl . We give below one of these: ekn,lm + elm,kn − ekm,ln − eln,km −1
− c rs [(ekr,n + ern,k − ekn,r )(els,m + ems,l − elm,s ) − (ekr,m + emr,k − ekm,r )(els,n + ens,l − eln,s )] = 0.
(1.6.6)
For the small strains we drop the products of ekl to obtain the compatibility conditions of the linear strain tensor ekn,lm + elm,kn − ekm,ln − eln,km = 0.
(1.6.7)
When these conditions are satisfied, then the single-valued integral of
exists and is given by
ekl = 21 (uk,l + ul,k )
(1.6.8)
kl xl + bk , uk = u0k + R
(1.6.9)
kl is a skew-symmetric tensor independent of where u0k is any solution of (1.6.8), R xk , and bk is a vector independent of xk . Thus, the displacement field is determined uniquely to within an arbitrary time-dependent rigid motion. If the compatibility conditions are satisfied, then there will not be a single-valued solution for the displacement field corresponding to ekl . In this case, the body will contain dislocations, cracks, inclusions, or other discontinuous fields. 2 For a brief account on tensor calculus, see Eringen [1980, Appendix C]. See also Eringen [1971, Section 3.7].
14
1 Motion and Deformation
Problems 1.1 Prove equations (1.1.11) and (1.1.12). KL follows 1.2 Show that for small deformations the linear rotation tensor R from the finite rotation R given by (1.2.19). 1.3 Show that the proper directions Nα are mutually orthogonal. 1.4 Prove the Cayley–Hamilton theorem for ckl : c3 − Ic c2 + IIc c − IIIc 1 = 0. 1.5 Obtain the material time-rate c˙kl of ckl . Is c˙kl an objective tensor? 1.6 The velocity field of a continuum is described by x˙ = f (y) − yg(r),
y˙ = xg(r),
z˙ = 0,
r = (x 2 + y 2 )1/2 .
(i) Determine the deformation rate tensor and its invariants. (ii) Obtain the expression of the vorticity vector. 1.7 Show that the linear compatibility equations (1.6.7) can also be derived by using the expression of the strain tensor ekl . 1.8 Study the literature and give the proof of the Riemann theorem (1.6.5).
2 Stress
2.0 Scope Chapter 2 is concerned with the fundamental concept of stress. The energy balance law for the entire body is postulated in Section 2.1. The global equation of the conservation of mass is given. By means of the transport and Green–Gauss theorem, the global laws of mass and energy are localized. An important theorem shows that the invariance of the energy balance law, under each Galilean group, leads to a balance law. Localization involves residuals, which are discussed in the remainder of this section. We have shown that the localization residuals can be incorporated into the concepts of the stress and energy leaving the new residuals only in the jump conditions. In this way, new concepts of stress and energy involving long-range interactions can be made part of the classical concepts. In Section 2.2 we present the second law of thermodynamics. The Clausius– Duhem (C–D) inequality, fundamental to the development of the constitutive equations, is introduced. Section 2.3 discusses the concept of dissipation. A theorem shows how one may obtain the solution of the C–D inequality. Onsager reciprocal relations are discussed. The solution of the C–D inequality is extended to the memory functionals relevant to the discussions of the dissipative media.
2.1 Balance of Energy In a material body, two types of loads are considered to act: Extrinsic body loads and surface loads. The first of these act at the mass points of the body. This may be called volume or body loads. Examples of these are the force of gravity, electromagnetic loads, and heat sources.
16
2 Stress
The surface loads arise from the action of one part of the body on another part through the common surface. The surface loads give rise to the concept of the stress tensor, electromagnetic surface loads, and the heat vector. These loads depend on the orientation of the surface on which they act. Denoting the external unit normal of the surface by n, the surface loads per unit surface area may be expressed as a linear function of n, e.g., t(n)k = tlk nl ,
q(n) = qk nk .
(2.1.1)
Of these, the first one is the surface traction per unit area and the second one is the heat load per unit area. Here tlk is the stress tensor and qk is the heat vector that act on a surface. The body loads and surface loads possess energies that are balanced by the internal energy stored in the body, and the kinetic energy. The law of the energy balance is then postulated as d 1 (tkl vl + qk )nk da ρ + 2 v · v dv = dt V −σ ∂ V −σ + ρ(fk vk + h) dv. V −σ
(2.1.2)
The left-hand side represents the time-rate of change of the total internal and kinetic energies. On the right-hand side, the surface integral expresses the energies of the total surface tractions and heat and the volume integral, the energies of the applied body force f, and other loads (e.g., heat input). As usual, ρ is the mass density. Equation (2.1.2) is the global equation of the energy balance law, valid for the entire body having volume V and surface ∂V, excluding the points of a discontinuity surface σ which may be sweeping the body with its own velocity u in the direction of the unit normal of σ · V − σ and ∂V − σ abbreviate V − σ = V − V ∩ σ,
∂V − σ = ∂V − ∂V ∩ σ.
(2.1.3)
We note that an internal energy density is postulated to exist. This is the stored energy in the body. If there are other loads, beside thermomechanical loads, then the energies of these loads are to be added to the right-hand side of (2.1.2). Adjoined to (2.1.2) is the equation of the conservation of mass which reads d ρ dv = 0. dt V −σ
(2.1.4)
For the evaluation of the time-rate of integrals and the conversion of surface integrals, we need some theorems:
2.1 Balance of Energy
Transport Theorems: d ∇ · v) dv + [ϒ(v − u)] · da, ϒ dv = (ϒ˙ + ϒ∇ dt V −σ V −σ σ ∂q d ∇ · q · da + curl(q × v) + v∇ q · da = dt S −γ S −γ ∂t [q × (v − u)] · dx; +
17
(2.1.5a)
(2.1.5b)
γ
Green–Gauss Theorem. A · n da = ∂ V −σ
V −σ
∇ · A dv +
[A] · n da;
Stokes’ Theorem. ∇ × A) · da + [A] · h ds = (∇ S −γ
(2.1.6a)
σ
γ
∂ S −γ
A · dx,
(2.1.6b)
where ϒ is any tensor and q and A are vectors, all being continuously differentiable in the star-shaped domains. The bold brackets [ ] denote the jump of its enclosure across the discontinuity surface σ or the discontinuity line γ · σ (γ ) may be sweeping the body (surface) with its own velocity u (see Figures 2.1.1 and 2.2.2). For proof of these theorems, see Eringen [1967, 1980, Section 2.5]. By means of expressions (2.1.5a) and (2.1.6a) the energy balance laws (2.1.2) may be transformed to
∇ · v) + (tkl,k + ρfl − ρ v˙l )vl −( + 21 v · v)(ρ˙ + ρ∇ V −σ −ρ ˙ + tkl vl,k + qk,k + ρh dv + [ − ρ( + 21 v · v)(vk − uk ) σ
+ tkl vl + qk ]nk da = 0. Similarly, equation (2.1.4) of the conservation of mass becomes ∇ · v) dv + [ρ(vk − uk )]nk da = 0. (ρ˙ + ρ∇ V −σ
(2.1.7)
(2.1.8)
σ
These equations are valid globally, i.e., for the entire body. Equation (2.1.8) may be expressed in local form as ∇ · v = ρˆ ρ˙ + ρ∇ [ρ(vk − uk )]nk = Rˆ
in V − σ,
(2.1.9a)
on σ,
(2.1.9b)
ˆ called the mass density residuals, are subject to where ρˆ and R,
18
2 Stress
d a = n da
σ ∂V – σ V–σ
Figure 2.1.1. Domain of application of equations (2.1.5a) and (2.1.6a). V − σ and ∂V − σ excludes points of σ .
V
ρˆ dv +
V −σ
Rˆ da = 0.
(2.1.10)
Here ρˆ and Rˆ represent, respectively, the body and surface mass creations. For chemically inert bodies they vanish, i.e., ∇ ·v =0 ρ˙ · ρ∇ [ρ(v − u)] · n = 0
in V − σ,
(2.1.11a)
on σ.
(2.1.11b)
Thus, in chemically inert bodies the mass is conserved locally. In order to obtain the local balance laws, we postulate that the energy balance law is invariant under the Galilean group of transformations. Intuitively, this is clear since the balance laws must be valid in a frame of reference that may be undergoing rigid motions. Axiom. The energy balance law is form-invariant under the Galilean group of transformations. We now employ this axiom to obtain the balance laws for thermomechanics.
2.1 Balance of Energy
19
n
γ h S–γ
∂S – γ
Figure 2.1.2. Surface of application of equations (2.1.5b) and (2.1.6b). S − γ and ∂S − γ excludes points of γ . Theorem. For each Galilean group of the energy balance law, there is a balance law of thermomechanics. Proof . For a time-dependent rigid motion of the frame of reference we have xk = Qkl (t)xl + bk (t),
(2.1.12)
where Qkl is an orthogonal tensor, i.e., QQT = QT Q = 1,
det Q = 1.
(2.1.13)
The velocity field in the new fram is given by ˙ kl xl + b˙k . vk = Qkl vl + Q
(2.1.14)
The angular velocity is expressed by (see (1.5.11): ˙ km Qlm . kl = Q
(2.1.15)
Suppose that, at time t, the body is brought back to the original orientation (i.e., Q = 1) having only constant translation and angular velocities (i.e., and b˙ are constants). Then, at time t, vk = vk + kl xl + b˙k ,
˙ kl . kl = Q
(2.1.16)
Under these transformations, the mass density ρ, the internal energy density , the stress tensor tkl , and the heat vector qk do not change, since the motion is rigid. But the body force fk must be accommodated by accelerations, i.e., f − v˙ = f − v˙ .
(2.1.17)
20
2 Stress
The new kinetic energy densities in the x- and x-frames are given by K = 21 v · v,
= 1 ˙ v. ˙ K 2v ·
(2.1.18)
Subtracting the energy balance (2.1.2) in the x-frame from that in the x-frame, we obtain d − K) dv = ρ(K tkl ( vl − vl )nk da dt V −σ ∂ V −σ ρ(fk vk − fk vk ) dv. (2.1.19) + V −σ
Applying the transport and Green–Gauss theorem, this becomes
˙ − K) − K)(ρ˙ + ρ∇ ˙ + tkl,k ( ∇ · v) − ρ(K vl − vl ) −(K V −σ vl − vl ),k + ρ(fk vk − fk vk ) dv + tkl ( − K)(vk − uk ) + tkl ( + [ − ρ(K vl − vl )]nk da = 0. (2.1.20) σ
Using (2.1.16) to (2.1.18), we have − K = vk (km xm + b˙k ) + 1 (kl xl + b˙k )(km xm + b˙k ), K 2 ˙ − K˙ = K v˙ · v − v˙ · v, vk − vk = kl xl + b˙k , v˙ k − v˙k = kl vl , fk vk − fk vk = fk ( vk − vk ) + vk ( v˙ k − v˙k ). (2.1.21) Substituting these into (2.1.20) we obtain
∇ · v) dv − vk (km xm + b˙k ) + 21 (kl xl + b˙k )(km xm + b˙k ) (ρ˙ + ρ∇ V −σ [(tkl,k + ρfl − ρ v˙l )(lr xr + b˙l ) + tkl lk ] dv + V −σ [tkl − ρvl (vk − vk )]nk (b˙l + lr xr ) da + σ − 21 (lr xr + b˙l )(lm xm + b˙l )[ρ(vk − uk )]nk da. σ
For chemically inert bodies, in view of (2.1.11), the first volume integral and the last surface integral vanish. For arbitrary b˙k and lk the second volume integral and the first surface integral may be localized to give tkl,k + ρ(fl − v˙l ) = ρ fˆl [tkl − ρvl (vk − uk )]nk = Fˆl tkl = tlk
in V − σ,
(2.1.22a)
on σ,
(2.1.22b)
in V − σ,
(2.1.23)
2.1 Balance of Energy
where the residuals ρ fˆ and Fˆ are subject to ρ fˆl dv + Fˆl da = 0. V −σ
21
(2.1.24)
σ
Using these results in the energy balance law (2.1.7) we obtain −ρ ˙ + tkl vl,k + qk,k + ρh = −ρ ˆ [ − ρ( +
1 2v
· v)(vk − uk ) + tkl vl + qk ]nk = −Eˆ
in V − σ,
(2.1.25a)
on σ,
(2.1.25b)
where the energy residuals are subject to ρ(fˆl vl − ˆ ) dv − Eˆ da = 0. V −σ
(2.1.26)
σ
If (2.1.24) and (2.1.26) are assumed to be true for any arbitrary surface, we would have ˆ Fˆl da = 0, ρ fl dv = 0, (2.1.27) V −σ σ Kˆ dv = 0, Eˆ da = 0, (2.1.28) V −σ
where
σ
Kˆ = ρ(fˆl vl − ˆ ).
(2.1.29)
However, in general, interactions between the surface and body load dictates that (2.1.24) and (2.1.26) represent the true situation. For chemically inert bodies, equations (2.1.11) and (2.1.22) to (2.1.26) constitute the balance of nonlocal continuum mechanics. They result from the invariance of the global energy balance under translations and the rigid rotations of the frame of reference. Hence the proof of the theorem.
A. Nature of Nonlocal Residuals The presence of nonlocal residuals in the balance laws is due to the fact that only global balance laws are posited to be true. In the special case where these residuals vanish, the balance laws become local. Classically, this is obtained by positing that the global (integral) balance laws are valid for every volume and every surface element of the body. This is known as localization. Accordingly, local balance laws are considered to be valid for each infinitesimal volume element isolated from the body. The fact that classical (local) continuum mechanics has been rather successful in its predictions, except for some singular situations (e.g., concentrated loads, sharp cracks, corners, etc.), owes its success to the extremely small zones of cohesion. The interatomic attractions of a reference atom are known to extend a few atomic distances, after becoming extremely small. With distance, interatomic
22
2 Stress
attractions die out fast. In lattice dynamical calculations, Born–Kármán approximation is often used, which extends only to the nearest neighbors. Seldom more than 10 neighbors are considered, which in crystal lattices corresponds roughly ◦
to 10 lattice parameter’s distance (or approximately 10 A= 10−7 cm for Nacl crystal). Clearly then the cohesive distance is rc ≤ 10−7 cm for Nacl crystals. In continuum mechanics, it is permissible to consider much larger cohesive radii (e.g., granular media). Let us define rc for each material as the characteristic radius at the end of which the cohesive force reduces to 0.1% of its value at the reference point. If a sphere with radius rc is considered to be the arbitrary volume element for the nonlocal body, then the nonlocal residuals can be considered to vanish. Therefore, the effects of the nonlocal residuals would be important only in situations where the cohesive zone is penetrated by the nature of the physical phenomena. This would be the situation, for example, if a concentrated load is applied to a single atom, or a crack tip is only one to two atomic distances sharp. Such mechanical experiments are nearly impossible, even with the 10 atomic distances. In any case, in such rare cases, nonlocal theory will also fail, because of the quantum considerations, and one may have to resort to atomic theories. This discussion does not imply that we are back into local continuum mechanics. Indeed, the nonlocal properties of materials will be brought into play through the constitutive equations. However, the balance laws will remain in their local forms to a very high degree of accuracy. Thus, dropping the residuals we have the local balance laws: Conservation of Mass. ∇ ·v =0 ρ˙ + ρ∇ [ρ(vk − uk )]nk = 0
in V − σ,
(2.1.30a)
on σ.
(2.1.30b)
Balance of Momentum. tkl,k + ρ(fl − v˙l ) = 0 [tkl − ρvl (vk − uk )]nk = 0
in V − σ,
(2.1.31a)
on σ.
(2.1.31b)
Balance of Moment of Momentum. tkl = tlk
in V − σ.
(2.1.32)
Balance of Energy. −ρ ˙ + tkl vl,k + qk,k + ρh = 0 [tkl vl + qk − ρ( +
1 2v
· v)(vk − uk )]nk = 0
in V − σ,
(2.1.33a)
on σ.
(2.1.33b)
2.1 Balance of Energy
23
B. Reduction of Nonlocal Balance Laws By a new interpretation of the stress tensor and the internal energy density, the nonlocal balance laws can be reduced to local form. To this end we define ρ fˆl = −tˆkl,k , tˆkl = tˆlk , −ρ ˆ = ρ ˙ − tˆkl vl,k − ρ h,
Tkl = tkl + tˆkl , l = Fˆl + [tˆkl ]nk , F ρH = ρ(h + h). (2.1.34)
E = + ,
= −Eˆ + [tˆkl vl − ρ H (vk − uk )]nk ,
Using the transport and Green–Gauss theorems, the balance laws (2.1.22) to (2.1.26) may be expressed as Tkl,k + ρ(fl − v˙l ) = 0, l , [Tkl − ρvl (vk − uk )]nk = F Tkl = Tlk , ˙ −ρ E + Tkl vl,k + qk,k + ρH = 0, 1 . [ − ρ(E + 2 v · v)(vk − uk ) + Tkl vl + qk ]nk = H
(2.1.35a) (2.1.35b) (2.1.36) (2.1.37a) (2.1.37b)
l and the surface energy H , these Except for the presence of the surface traction F equations are similar to their local forms (2.1.31) to (2.1.33). The foregoing exercise shows that if we regard the stress and internal energy as nonlocal fields, then the classical balance laws in V − σ are not altered. Only the jump conditions on σ may have additional effects arising from the creation of new surfaces. Consequently, for economy in notations, we may keep the old notations (i.e., we use tkl for the new Tkl , for E, and h for H ). Thus, with these interpretations, the nonlocal balance laws read ∇ ·v =0 ρ˙ + ρ∇ [ρ(vk − uk )]nk = 0 tkl,k + ρ(fl − v˙l ) = 0 l [tkl − ρvl (vk − uk )]nk = F [ − ρ( +
1 2v
in V − σ,
(2.1.38a)
on σ, in V − σ,
(2.1.38b) (2.1.39a)
on σ,
(2.1.39b)
−ρ ˙ + tkl vl,k + qk,k + ρh = 0 in V − σ, · v)(vk − uk ) + tkl vl + qk ]nk = H on σ.
(2.1.40a) (2.1.40b)
With the new definitions (2.1.34) we no longer need the auxiliary conditions (2.1.24) and (2.1.26). However, we reproduce here the relations of these two sets l da = 0, (2.1.41) tˆkl nk da − F ∂ V −σ σ d da = 0. (2.1.42) ˆ ˆ tkl nk da + H ρ dv − ρ h dv − dt V −σ ∂ V −σ ∂ V −σ σ These new definitions of the stress tensor Tkl , energy E, and heat input H by (2.1.34), introduce new concepts. These quantities must satisfy the equations of
24
2 Stress
motion and energy in the local forms (2.1.35a) and (2.1.37a). In effect, these equations are identical to those of the classical (local) theory, except for the appearance l and H in the jump conditions (2.1.39b) and (2.1.40b). Of course, Tkl , E, and of F H include the nonlocal effects in their constitutions. l and H may be explained as follows: The presence of F We may imagine that there exists an ideal continuum of an infinite extent in all directions, with no internal stresses and energy. When there are no applied loads (force, couple, heat), this ideal continuum is at rest in its natural state. We shall call such a body a perfect body or a perfect continuum. For our study, if we isolate a subbody with a surface, by cutting a portion from the perfect body, this subbody will acquire internal stresses and stored energy, because of the creation of new surfaces. Also, some energy is imparted through the cutting process. In order to l and a restore the subbody to the natural state, we need to supply a surface traction F . Generally, these loads are small since the residual intermolecular surface energy H attractions are confined to a very thin boundary layer adjacent to the surface and they die out rapidly within a short distance from the surface. However, it is clear that, in order to return the subbody to the natural state, it is necessary to consider l and the surface energy H . These loads may become important the surface load F in some cases, e.g., phase transitions, and some critical surface phenomena. The new definition of the stress tensor tkl and energy possess nonlocality in their constitutions, i.e., we must express them with nonlocal constitutive equations. Indeed, this is also indicated by noting that, in atomic lattice models, the nonlocal effects are brought in through distant spring forces from all the other atoms to the reference atom, and the equations of motion involve no residuals.
C. A Second Alternative If we insist on keeping the local definition of stress, as in classical mechanics, then the alternative to the characterization of nonlocal residuals is through a constitutive ersatz for the residuals. This process requires constitutive equations for both volume and surface residuals. In this way, surface physics is brought into the domain of continuum physics. Nonlocal residuals may become important in extremely small (atomic scale) bodies and within a few atomic layer near surfaces. In this book we shall develop the first point of view, based on (2.1.38a) to l and H , (2.1.40b). Here too the surface physics is indicated by the residuals F when needed. Based on these observations and the short coherence length of the interatomic forces, we conclude that it is safe to discard nonlocal residuals except, possibly, atomic scale phenomena.
2.2 Second Law of Thermodynamics The global form of the second law of thermodynamics has the classical form 1 ρh d ρη dv − qk nk da − dv ≥ 0, (2.2.1) dt V −σ ∂ V −σ θ V −σ θ
2.2 Second Law of Thermodynamics
25
where η is the entropy density and (θ > 0, inf θ = 0) is the absolute temperature. By means of the transport theorem (2.1.5a) and the Green–Gauss theorem (2.1.6a), equation (2.2.1) is converted to ρ η˙ −
q k
θ
,k
[ρη(vk − uk ) −
−
ρh − γˆ ≥ 0 θ
qk ]ηk − ˆ ≥ 0 θ
in V − σ,
(2.2.2a)
on σ,
(2.2.2b)
where the entropy residuals γˆ and ˆ are subject to γˆ dv + ˆ da = 0. V −σ
(2.2.3)
σ
For an arbitrary and independent choice of σ , (2.2.3) implies that γˆ dv = 0, ˆ da = 0. V −σ
(2.2.4)
σ
We introduce the Helmholtz free energy by ψ = − θη
(2.2.5)
and eliminate from (2.2.40a), to cast the energy equation into the form −ρ(ψ˙ + ηθ ˙ + ηθ˙ ) + tkl vl,k + qk,k + ρh = 0. Substituting ρh from this into (2.2.2a) we obtain the (C–D) inequality 1 1 ˙ + tkl dkl + qk θ,k dv ≥ 0. −ρ(ψ˙ + ηθ) θ V −σ θ
(2.2.6)
(2.2.7)
Since tkl = tlk , we have tkl vl,k = tkl dkl where dkl is the deformation-rate tensor, defined by (1.4.10). We decompose the constitutive-dependent variables η and tkl into static (equilibrium, reversible) and dynamics parts denoted, respectively, by the left subscripts R and D, i.e., η = R η + D η, tkl = R tkl + D tkl . (2.2.8) With the introduction of η in (2.2.5), ψ is considered to be a fully static variable and, of course, the heat q has no static part. Definition (Thermodynamic Equilibrium). The state of body is said to be in thermodynamic equilibrium if, in C–D inequality (2.2.7), the dynamic contributions vanish, hence 1 ˙ + R tkl dkl ] dv = 0. (2.2.9) [−ρ(ψ˙ + R ηθ) V −σ θ
26
2 Stress
Subtracting (2.2.9) from (2.2.7) we obtain 1 1 −ρD ηθ˙ + D tkl dkl + qk θ,k dv ≥ 0. θ V −σ θ
(2.2.10)
This is the C–D inequality not to be violated by the dynamic parts of the constitutivedependent variables D η, D t, and q. Inequality (2.2.10) has the form V −σ
1 J · Y dv ≥ 0, θ
(2.2.11)
where J and Y are the ordered sets defined by J = (−ρD η, D tkl , qk /θ), Y = (θ˙ , dkl , θ,k ).
(2.2.12)
Here, the collection J is called the thermodynamic flux and Y is called the thermodynamic force. Thus, the dissipation of energy represented by (2.2.10) is expressible as the inner product of two vectors in 10-dimensional space.
2.3
Dissipation Potential
In the order listed, we may consider J and Y as vectors in 10-dimensional space, whose scalar product (2.2.11) must be nonnegative. The general solution of an inequality of the form (2.2.11) was given by Edelen [1993]. Theorem (Edelen). Let C 1,0 denote the collection of all scalar-valued functions of the arguments {Y, ω} that are of class C 1 in Y and continuous in ω , and let ˆ Cˆ 1,0 denote all collections {J (Y, ω ), K(Y, ω) | 1 ≤ < M} such that each of 1,0 ˆ ∈ Cˆ 1,0 that satisfy J , K} these M + 1 functions belong to C . All systems {J ˆ Y · J (Y, ω ) ≥ K(Y, ω ),
(2.3.1)
ˆ ω ) is subject to where K(Y,
ˆ K(Y, ω ) dV = 0
(2.3.2)
V
are given by J (Y, ω ) = ∇ ,Y (Y, ω ) + U(Y, ω ), 1 ˆ Y, ω )] dτ + ϕ(ω ω ), [P (τ Y, ω ) + K(τ (Y, ω ) = τ 0 where
ˆ P (0, ω ) + K(0, ω ) = 0,
(2.3.3) (2.3.4)
(2.3.5)
2.3 Dissipation Potential
27
and P (Y, ω ) is any element of C 1,0 such that P (Y, ω ) ≥ 0,
(2.3.6)
and U (Y, ω ) is any vector-valued function such that each component belongs to C 1,0 and Y · U = 0. (2.3.7) We shall call (Y, ω ) the dissipation potential and U (Y, ω ) the constitutive residual. For proof, we refer the reader to Edelen. The concept underlying the above representation can be deduced from ˆ Y · J (Y, ω ) = Y · ∇ ,Y = P + K.
(2.3.8)
A theorem due to Poincaré requires that any closed differential form on a starshaped domain is an exact differential form. More explicitly, if a vector-valued function J is curlless, in the sense that ∂J ∂J , = ∂Y ∂Y then J admits a potential in a star-shaped domain. This potential can be computed by a line integral of J ·dY along a straight line from the origin of the domain to the point Y. Hence is given by (2.3.4). From (2.3.7), it is clear that the vector U(Y, ω ) does not contribute to the dissipation inequality. If J (Y, ω ) is of C 2,0 , then any solution of the inequality (2.3.1) satisfies the symmetry relations ∂ ∂ [J (Y, ω ) − U (Y, ω )] = [J (Y, ω ) − U (Y, ω )]. ∂Y ∂Y
(2.3.9)
These reduce to Onsager reciprocity relations ∂J ∂J = ∂Y ∂Y
(2.3.10)
if and only if U(Y, ω ) = 0. The case Kˆ = 0 is of interest. ˆ ω ) = 0, then the satisfaction of the strong form, Y ·J J (Y, ω ) ≥ Corollary. If K(Y, ω 0 of the fundamental inequality, implies that (Y, ) is given by
1
(Y, ω ) =
P (τ Y, ω ) 0
P (Y, ω) = Y · J (Y, ω)
dτ ω ), + ϕ(ω τ (2.3.11)
28
2 Stress
and Y · U(Y, ω ) = 0, J (Y, ω ) = ∇ ,Y (Y, ω ) + U(Y, ω ), J (0, ω ) = U(0, ω) = 0, P (0, ω ) = 0,
(2.3.12) (2.3.13)
where (0, ω ) is the absolute minimum of (Y, ω ) with respect to Y at each ω , and the symmetry relations (2.3.9) hold if each of the components of J (Y, ω ) belongs to C 2,0 . It is clear that (0, ω ) = min (Y, ω ) Y
(2.3.14)
and that (Y, ω ) is a nondecreasing function on all rays in the vector space Y that emanates from the origin 0. Edelen gives an example for the residual U in terms of Hall current in the constitutive equation for the current J = σ E + µH E × B,
(2.3.15)
which shows that U·E=0 since µH (E × B) · E = 0. This latter relation shows that Y · U = 0, where Y = (E, B) and U = µH E × B. It is well known that, in the atomic scale, with the time reversal, B changes sign, so that in (2.3.15) the nonlinear term in B alone occurs. Thus, all higher-order approximations will involve second and higher degrees in Y. Consequently, U(λY, ω ) = O(λ2 ).
(2.3.16)
J (Y, ω ) + O(λ2 ), J (λY, ω ) = λJ
(2.3.17)
In this case, then and the Onsager relation (2.3.9) is satisfied to within O(λ2 ). In this book, we shall be concerned mostly with constitutive equations that are linear in Y , so that we shall take U = 0 in the sense of (2.3.16). Alternatively, we shall use: Onsager’s Postulate. Onsager reciprocal relations are posited to be valid for constitutive equations that are linear in the thermodynamic force Y, with proper consideration of the time reversal hypothesis. We note that for large thermodynamics forces, the constitutive residuals U can make important contributions, as is exemplified by the Hall current, nonlinear memory-dependent materials, the second sound (observed in He II), etc.
2.3 Dissipation Potential
29
Memory Functionals For memory-dependent nonlocal media, J is a functional of the thermodynamic forces over the space occupied by body V and all past time histories. In this case, the dissipation inequality is of the form ˆ Y(x, t) · J [Y(x , t ), ω ] ≥ K,
x ∈ V,
0 ≤ t < ∞.
(2.3.18)
Here Y(x , t ) is a collection of thermodynamic forces at all points x of the domain occupied by the body and at all present and past times. If z is a member of J at x and t, then we would like to find z as a functional of Y in the form z = F [Y(x , t ); Y(x, t)],
−∞ < t ≤ t,
x ∈ V,
(2.3.19) Y(x , t )
where we omit showing the dependence of z on ω . Now, if we treat as a parameter and consider z as a function of Y(x, t), then the solution (2.3.3) again applies.
Problems 2.1 Prove the validity of equations (2.1.1). 2.2 In some physical problems (e.g., plasticity) the time-rate of the stress tensor t˙kl becomes important. Is t˙kl objective? If not, what other tensor can be used instead of t˙kl ?
in the two rectangular 2.3 Give the relations of the stress tensors tkl and tkl
coordinates xk and xk that are obtained by rigid rotation about an axis not coincident with any coordinates.
2.4 Calculate the surface traction t(n)k on a surface x3 = f (x1 , x2 ) in terms of tkl referred to rectangular coordinates. 2.5 Determine the components of the stress tensor in spherical coordinates in terms of those in rectangular coordinates. 2.6 Carry out, in all detail, the proof of the theorem to obtain all the balance laws of thermomechanics. 2.7 Write expressions for the balance laws in spherical coordinates. 2.8 In a body in thermodynamic equilibrium, show that ψ = (ρ, θ, CKL ),
Rη
=−
∂ , ∂θ
tkl = ρ
∂ xk,K xl,L . ∂CKL
2.9 Navier–Stokes fluids have constitutive equations described by tkl = −pδkl + λvr,r δkl + µ(vk,l + vl,k ),
qk = kθ,k .
What conditions λ, µ, and k must be subjected in order not to violate the Clausius–Duhem inequality?
This page intentionally left blank
3 Constitutive Equations
3.0 Scope In Section 3.1, we present eight axioms that are fundamental to the development of the constitutive equations. Since the inception of these axioms in 1966, their universality became clear in many diverse applications in many different fields. Here we postulate and discuss such axioms separately and give mathematical formulations. Later chapters contain many diverse applications to nonlocal memory-dependent elastic solids, fluids, electromagnetism, microcontinuum field theories, etc., as a testimony of their fundamental nature. In Section 3.2, using these axioms, constitutive equations are obtained for memory-dependent nonlocal thermoelastic solids, and in Section 3.3 for memorydependent, nonlocal thermoviscous fluids. Thus far, these developments are exact and applicable to nonlinear media undergoing finite deformations and motions.
3.1 Constitutive Axioms The fundamental laws of nonlocal continuum mechanics consist of five partial differential equations (2.1.38a) to (2.1.40a) and one inequality (2.2.7). Given the external loads f and h there are 14 scalar variables ρ, vk , tkl , θ, and qk . Clearly, the systems of basic equations are highly indeterminate. We need nine more equations to close the system. This is also clear from the fact that the five partial differential equations of the basic laws are valid for all continua irrespective of their material constitutions. They are valid for elastic solids, viscous fluids, oil, blood, plastics, etc.
32
3 Constitutive Equations
The additional nine equations needed must somehow reflect the material properties of bodies. In continuum mechanics these relations are called constitutive equations. Constitutive equations for elastic bodies are often called stress–strain relations. For viscous fluids they express the stress deformation-rate relations and for heat conditions the Fourier law. Here, we shall present a general setting for the construction of such relations, within the context of the nonlocal heat-conducting nonlinear continua from which various order theories can be extracted. It is possible to construct constitutive equations by examining interatomic attractions and using statistical mechanics. A simple example will be given in Section 6.2. However, this method of approach soon ceases to be tractable when material composition is complicated. For example, amorphous or porous solids, with memory effects and/or undergoing finite deformation or displaying nonlocal effects, do not lend themselves to such approaches. On the other hand, when the continuum approach is used there will be left some unknown material functions or constants (e.g., the Young modulus, viscosity moduli) which must be determined either by experimental means, or by comparing the constitutive equations with those obtained from the atomic approaches (if available). Examples of these are to be found in Sections 6.2, 8.4, and 13.14. Fundamental to the continuum approach to constitutive equations are the following eight basic axioms, which were proposed by Eringen [1966], [1967]: (i) Axiom of Causality. (ii) Axiom of Determinism. (iii) Axiom of Equipresence. (iv) Axiom of Objectivity. (v) Axiom of Material Invariance. (vi) Axiom of Neighborhood. (vii) Axiom of Memory. (viii) Axiom of Admissibility. (i) Axiom of Causality. The motions, temperatures and charges of the material points of a body are the cause of all physical phenomena. The remaining variables (other than those derivable from motion, temperature and charges) that enter the expressions of the Clausius–Duhem (C–D) inequality are the response functions (or constitutive-dependent variables). Thus, the independent mechanical variables are x = x(X , t ),
θ = θ(X , t ) > 0,
X ∈ V,
inf θ = 0, −∞ < t ≤ t.
(3.1.1)
3.1 Constitutive Axioms
33
Electromagnetically active media, the presence and motion of charges, cause the electric field E and magnetization B so that the electromagnetic (E-M) independent variables are joined to (3.1.1): E = E(X , t ),
B(X , t )
X ∈ V
− ∞ < t ≤ t.
(3.1.2)
Thus Y = x(X , t ), θ(X , t), E (X , t ), B(X , t ) , X ∈ V , −∞ < t ≤ t,
(3.1.3)
constitutes the set of independent variables. The constitutive-dependent variables are then, the internal energy density , the entropy η, the stress tensor tkl , and the heat vector qk . For the electromechanically active media to these we adjoin the polarization P, the magnetization M , the current vector J (see Section 5.2), i.e., Z = (, η, tkl , qk , Pk , Mk , Jk ).
(3.1.4)
(ii) Axiom of Determinism. The constitutive-dependent variables at a material point X, at time t, are functionals of the independent variables over the entire material points X of the body, at all past times t up to and including the present time t. Symbolically, this is expressed by Z(X, t) = F[Y(X , t )],
X ∈ V ,
−∞ < t ≤ t.
(3.1.5)
(iii) Axiom of Equipresence. At the outset, all constitutive-dependent variables must be expressed as functionals of the same list of independent constitutive variables until the contrary is deduced. This simply states that each member of Z is a functional of all members of Y. It is an axiom for a precautionary measure not to forget some variable or favor others. (iv) Axiom of Objectivity. Constitutive equations must be form-invariant with respect to rigid motions of the spatial frame of reference. It is evident that the material properties cannot depend on the motion of the observer. This imposes the objectivity (or material frame-indifference) on the constitutive equations (see Section 1.5). (v) Axiom of Material Invariance. Constitutive equations must be form-invariant with respect to the symmetry group of the material points.
34
3 Constitutive Equations
The crystallographic orientations of the material points in a body give rise to certain symmetries represented by the crystallographic point group in the reference state. Under this group of transformations, of the material frame of reference, restrictions are imposed on the constitutive equations. For the electromechanical media the magnetic group enlarges 32 members of the crystallographic point group to 90 members. The constitutive equations of E-M elastic crystals are discussed in a book by Kiral and Eringen [1990]. (vi) Axiom of Neighborhood. The values of the independent constitutive variables at distant material points X from the reference point X do not appreciably affect the value of the constitutive-dependent variables at X. It is well known that the interatomic attractions on a reference atom from distant atoms are weak. In fact, for most materials, the atomic neighborhood influencing a reference atom is less than 10 atomic distances. This influence region may be called a cohesive zone. Beyond the cohesive zone the interatomic attractions can be neglected. Within the cohesive zone the influence of the neighboring atoms decreases drastically with the distance from the reference atom. In continuum theory this may be expressed in two different ways. (a) Smooth Neighborhood. Suppose that in a region V0 ∈ V , appropriate to each material body, the independent variables admit Taylor series expansions in X − X in V0 for all t ≤ t0 , terminating with gradients of order P , Q, etc.,
x(X , t ) = x(t ) + (XK − XK1 )x,K1 (t ) 1 1
+··· + (X − XK1 ) · · · (XK − XKp )x,K1 ···KP , p P ! K1 and similarly for the other variables θ(X , t ), E (X , t ), and B(X , t ). If the response functionals are sufficiently smooth so that they can be approximated by the functionals in the field of real functions
x(t ), x,K1 (t ), . . . , x,K1 ···KP (t ), θ(t ), θ,K1 (t ), . . . , θ,K1 ···KQ (t ),
(3.1.6)
we say that the material at X for all t ≤ t satisfies a smooth neighborhood hypothesis. Material of this type, for P > 1, Q > 1 are called nonsimple materials of gradient type. (b) Attenuating Neighborhood Hypothesis (Eringen [1966], [1975]). For some materials, smooth neighborhood hypotheses fail to apply. Actually, some of the gradients of the constitutive-dependent variables may not exist. We can still formulate a hypothesis which introduces a bias in favor of the points near the reference point X. To this end, we introduce an influence function Hr (|X − X|) > 0, or order r as Hr (0) = 1,
lim
|X −X|=max
|X − X|r Hr (|X − X|) = 0,
r > 3, (3.1.7)
3.1 Constitutive Axioms
35
monotonically for large |X − X|. An example of such a function is α(t ) > 0,
H∞ = exp(−αR 2 ),
(3.1.8)
where R is the distance of X from X, in rectangular coordinates, i.e., R = |X − X|.
(3.1.9)
Other possibilities exist. For example, Hr = [1 + β(t )R 1+p ]−1 ,
3 < r < p.
(3.1.10)
A generalized function, with finite support (e.g., a Dirac-delta sequence), may also serve this purpose. The influenced distance between x(X , t ) and x(t ) ≡ x(X, t ) or the H -norm of x(X , t ) − x(t ) may be defined as
1/2 |x(X , t ) − x(X, t )| H (|X − X| dV (X ) .
|x(X , t ) − x(X, t )|H =
2
V
(3.1.11)
An axiom of attenuating neighborhood can now be stated as: Axiom ((vi) b) (Attenuating Neighborhood). The response functionals are continuous in a neighborhood of X in the function space normed according to (3.1.11) for all t ≤ t. Alernatively, for every e there exists an a > 0 such that Z[x(X , t )] − Z[x(t )] < e, (3.1.12) whenever
|Y(X , t ) − Y(t )|H < a,
(3.1.13)
for all times t ≤ t where denotes the magnitudes of each member of Z, and e, a may be a set of positive numbers appropriate to each member of Z and Y, respectively. Accordingly, when the distances of the members of the set Y(X , t ) differ very little from those of Y(t ) at X, then the corresponding members of the response functional set Z are close together. Thus the presence of the influence function H makes the influence of X near X feel much stronger than those from distant points. (vii) Axiom of Memory. The values of the constitutive-independent variables at distants past the present do not appreciably affect the values of the constitutive functionals at the present time. This axiom is the counterpart of the Axiom of Neighborhood in the time domain. Again, two alternative formulations exist.
36
3 Constitutive Equations
(a) Smooth Memory. Suppose that there exists a time τ0 < t, appropriate to each material such that the independent variable set Y(X , t ) possesses a Taylor series expansion at t = t for all X ∈ V , terminating some numbers p, q . . ., e.g., (3.1.14) Y(X ) ≡ Y(X , t) = x(X , t), x˙ (X , t), . . . , x(p) (X , t),
(q)
˙ , t), . . . , θ (X , t), etc. . . . . θ(X , t), θ(X If the constitutive functionals are sufficiently smooth, so that the dependence on Y(X , t ) can be replaced by (3.1.14), we say that they satisfy the Axiom of Smooth Memory. Formally
)], Z(X , t ) = Z[Y(X
(3.1.15)
where dependence on the present time t is not shown. Such materials are called the rate-type materials. (b) Fading Memory (Coleman and Noll [1961]). The independent variable set Y may not admit a Taylor series expansion about t, and/or the response function set Z may not be smooth enough to be expressible in terms of the rates (3.1.14). In this case, we can formulate a fading-memory hypothesis by introducing influence functions in time such that the set Y near the present time is favored. Let Ip (t −t ) be such an influence function of order p, defined over −∞ < t ≤ t such that Ip (0) = 1, lim (t − t )p Ip (t − t ) = 0, (3.1.16) t→−∞
p > 1 monotonically for large
t − t .
Examples of the influence functions are I∞ (t − t ) = exp[−α(t − t )], α > 0,
p+1 + 1]−1 , r < p. Ir (t − t ) = [k(X )(t − t )
(3.1.17)
The normed distance between x(X , t ) and x(X , t) of the I-norm is then defined by
|x(X , t ) − x(X , t)| =
t
−∞
I (t − t )|x(X , t ) − x(X , t)| dt 2
1/2 (3.1.18)
Axiom ((vii) b) Fading Memory. The response functionals are continuous from below in a neighborhood of t of the independent variable set Y(X , t ), in the function space normed according to (3.1.18) for all X ∈ V .
3.1 Constitutive Axioms
37
Mathematically, for every e > 0 there exists an a > 0 such that
whenever
Z[x(X , t )] − Z[x(X , t)] < e,
(3.1.19)
|Y[x(X , t ) − Y[x(X, t)]| < a,
(3.1.20)
for all times t ≤ t, X ∈ V · e, and a may be different for each member of Z and Y. Thus, if the histories of Y(X , t) differ very little from those at t ≤ t, then the response functionals are close together. The influence regions may differ for the different members of Z. For example, the E-M influence region may be different than the influence of deformations. (viii) Axiom of Admissibility. All constitutive equations must be consistent with the balance laws and the entropy inequality. This seemingly obvious postulate, which is certainly valid for all scientific disciplines, helps to simplify the constitutive equations and provides thermodynamic admissibility. For example, mass density ρ(X , t ) must obey the law of the conservation of mass, ρ0 /ρ(X , t ) = det xk,K (X , t ). (3.1.21) Whenver xk,K (X , t ) becomes a member of the constitutive-independent variable set Y, we can discard ρ(X , t ) as an independent variable (e.g., elastic solids). More importantly, all members of the constitutive response functional set Z are subject to the second law of thermodynamics which must not be violated. This restriction eliminates some members of Y and/or it places restrictions on them. Restrictions from Rigid Body Motions It is well known that rigid motions do not alter the shape of the body or cause any response in the body, e.g., no stress is created. Consequently, a constitutive equation of the type (3.1.5) is too general to be of any utility. We now proceed to replace x(X , t ), a member of (3.1.3), with a more suitable variable that is not affected by the rigid motion. From (1.2.11) we have F = RU
or
1/2
xk,K = RkL C LK .
(3.1.22)
In rectangular coordinates, by integration, we have xk (X , t ) − xk (X, t) =
X
1/2
RkL (X, t ) C LK (X, t ) dXK .
(3.1.23)
X
This result shows that we may replace the functional dependence x(X , t )−x(X, t) in the set Y by R(X , t ) and C(X , t ). But the dependence of the set Z on R is not permissible on account of the Axiom of Objectivity, unless we employ an objective
38
3 Constitutive Equations
tensor constructed purely in terms R(X , t ). For nonpolar materials, Axiom (v) eliminates this dependence so that (3.1.3) is replaced by Y(X , t ) = C(X , t ), θ(X , t ), E (X , t ), B(X , t ) . (3.1.24) With the introduction of the Helmholtz free energy ψ by (2.2.5) and and η being functionals of the Y(X , t ), we are free to consider ψ, as a static dependent variable, i.e., ψ = [C(X ), θ(X ), E (X ), B(X )], (3.1.25) where, here and henceforth, the dependence of C, θ, E , and B on t is suppressed. The axiom of thermodynamic admissibility for the mechanical systems requires that ψ, η, tkl , and qk must not violate the C–D inequality (2.2.7), namely, 1 ˙ ˙ −ρ(ψ + ηθ ) + tkl dkl + qk θ,k dv ≥ 0, (3.1.26) θ V since θ > 0, inf θ = 0. For the electromechanical system the C–D inequality is given in Section 4.4. In the following sections, we explore the consequences of these axioms in the development of the constitutive equations.
3.2 Constitutive Equations of Memory-Dependent Nonlocal Thermoelastic Solids1 We introduce the material tensors TKL and QK by TKL =
ρ0 tkl XK,k XL,l , ρ
QK =
ρ0 qk XK,k . ρ
(3.2.1)
Substituting these into (3.1.26), using (1.4.9) and ρ dv = ρ0 dV , inequality (3.1.26) is transformed to 1 ˙ + 1 TKL C˙ KL + QK θ,K dV ≥ 0. −ρ0 (ψ˙ + ηθ) (3.2.2) 2 θ V Nonlocal elastic solids are defined by the free energy of the form (3.1.25). In order ˙ we need to introduce a function space. For simplicity, we confine to calculate ψ, ourselves to the class of linear functionals in the sense of Friedman and Katz [1966]. Let C denote the class of bounded real-valued continuous functions defined in V. Define the norm of a function f (x) ⊂ C by f = max |f (x)|. x∈V
1 Theory was given by Eringen [1974b].
(3.2.3)
3.2 Memory-Dependent Nonlocal Thermoelastic Solids
39
Suppose that the functional F(f ) is continuous and bounded by the norm (3.2.3). This is additive in the sense that for two functions {f1 , f2 } ⊂ C: F(f1 + f2 ) = Fg (f1 ) + Fg (f2 ),
(3.2.4)
where Fg (f ) = F(f + g) − F(g) for {f, g} ⊂ C. Under these conditions, the theorem of Friedman and Katz states that F(f ) = K[f (x ), x ] dv(x ). (3.2.5) V
We identify F with the free energy function and write ρ0 ψ(X, t) = F [C(X ), θ(X ), X ; C(X), θ(X), X] dV (X ).
(3.2.6)
V
The total free energy of the body is given by ρ0 ψ(X, t) dV = F (C , θ , X ; C, θ, X) dV dV , V
V
(3.2.7)
V
where we put C = C(X ), θ = θ(X ), and dV = dV (X ). Since the order of integration does not affect the total free energy, we assume that F is a symmetric function of its arguments, i.e., S
F (C , θ , X ; C, θ, X) = F (C, θ, X; C , θ , X ) ≡ F ,
(3.2.8)
where, and henceforth, a superscript (S) indicates the symmetrization, i.e., the interchange of X and X . We assume that F is continuously differentiable with respect to C , θ , C, and θ. Using (3.2.6) we calculate ∂F ∂F ∂F S ∂F S
˙ ˙ ·C + θ˙ dV + D, (3.2.9) ρ0 ψ = + + ∂C ∂C
∂θ ∂θ
V where
D= V
∂F ˙
·C − ∂C
Clearly,
∂F ∂C
S
˙ + ∂F θ˙ − ·C ∂θ
∂F ∂θ
S θ˙ dV .
(3.2.10)
D dV = 0.
(3.2.11)
V
We decompose the constitutive-independent variables into static (recoverable) and dynamic parts η = R η + D η,
T = R T + D T,
Q = D Q,
(3.2.12)
40
3 Constitutive Equations
where the left subscripts R and D denote, respectively, the static and dynamic parts. The heat vector Q possesses no static part. With these, the C–D inequality (3.2.2) becomes ∂F S ∂F
˙ + dV θ − ρ0R η + ∂θ ∂θ
V V ∂F ∂F S
1 ˙ + 2 RT − dV · C + ∂C
V ∂C 1 1 ˙ ˙ − ρ0D ηθ + 2 D T · C + Q · ∇ θ dV ≥ 0. (3.2.13) θ ˙ it is clear that we must have Because R η, R T, and F do not depend on θ˙ and C, ∂F 1 ∂F S dV , + Rη = − ρ0 V ∂θ ∂θ
∂F ∂F S dV , + RT = 2 ∂C
V ∂C
(3.2.14)
and −ρ0D ηθ˙ +
1 ˙ 2 DT · C +
1 Q · ∇ θ − Kˆ ≥ 0. θ
(3.2.15)
The last inequality is the dissipation inequality which has the form (2.3.1) with Kˆ satisfying (2.3.2). Hence the solution of (3.2.15) is given by (2.3.3), i.e., ∂ + U η, ∂ θ˙ ∂ 1 + UT , 2 DT = ˙ ∂C ∂ Q = + UQ , ∇ θ) θ ∂(∇
−ρ0D η =
(3.2.16)
where is the dissipation potential and U η , UT , and UQ are the constitutive residuals, subject to ˙ + UQ · ∇ θ = 0. U η θ˙ + UT · C Thus, they do not contribute to the dissipation of energy.
(3.2.17)
3.2 Memory-Dependent Nonlocal Thermoelastic Solids
41
Let the collection of the dependent variables be denoted by J, the independent variables by Y and ω , and the collection of the constitutive residuals by U, i.e.,2 Q 1 , J = −ρ0D η, 2 D T, θ ˙ Y(X, t) = {θ˙ (X, t), C(X, t), ∇ θ(X, t)}, ω (X, t) = {C(X, t), θ(X, t)}, U = {U η , UT , UQ }. (3.2.18) Then the C–D inequality (3.2.15) may be expressed in the form of a scalar product J · Y − Kˆ ≥ 0.
(3.2.19)
The collections Y(X, t) and J(X, t) are, respectively, called the thermodynamic force and the thermodynamic flux. In order to characterize the dissipation potential we introduce the difference histories of Y: Y(t) (X, τ ) = Y(X, t − τ ) − Y(X, t),
0 ≤ τ < ∞.
(3.2.20)
Note that with the change of variable t − τ = s, this becomes Y(t) (X, t − s) = Y(X, s) − Y(X, t),
−∞ < s ≤ t,
(3.2.21)
which justifies the terminology difference history. The dissipation potential will depend on the histories of Y at all points of the body. We express as a functional of Y(t) : ∞ ∞ = dτ dτ G[Y(t) (X , τ ); Y(t) (X, τ )] dV
(3.2.22) 0
0
where G may also depend on Y and ω. The total dissipation in the body is given by ∞ ∞
W = dV = dτ dτ G dV dV . V
0
0
V
(3.2.23)
V
From this it is clear that only the symmetric part of G in (X , τ ) and (X, τ ) contributes to W . Hence, we stipulate that G[Y(t) (X , τ ); Y(t) (X, τ )] = G[Y(t) (X, τ ); Y(t) (X , τ )], lim G = 0. Y(t) →0
(3.2.24)
In addition, we stipulate: 2Although it is more natural to place Q as a member of J and ∇ θ/θ as that of Y(X, t), for memory-dependent materials the present organization (3.2.18) eliminates much complications. Moreover, the constitutive equations obtained for Q/θ upon multiplication by θ obtains the constitutive equations for Q. Thus, both results must be equivalent.
42
3 Constitutive Equations
Postulate of Dissipation The total dissipation W in the body is nonnegative for all arbitrary and independent variations of the members of Y(t) , throughout the body V , and at all times −∞ < t ≡ t − τ ≤ t. The dynamic part of the constitutive equations (3.2.16) is expressed in a compact form ∂ J= + U. (3.2.25) ∂Y Upon substituting from (2.2.5) into (2.1.40a) of the energy balance, we have ˙ + tkl dkl + qk,k + ρh = 0. −ρ(ψ˙ + ηθ ˙ + ηθ)
(3.2.26)
Using (3.2.1) and (1.4.9) this equation takes its material form −ρ0 (ψ˙ + ηθ ˙ + ηθ˙ ) + 21 TKL C˙ KL + QK,K + ρ0 h = 0.
(3.2.27)
If we now use (3.2.14), this is reduced to −ρ0 θ(R η˙ + D η) ˙ +
1 ˙ 2 D TKL CKL
+ QK,K + ρ0 h = 0.
(3.2.28)
Nonlocal Elastic Solids without Memory3 ˙ and ∇ θ, we obtain the ˙ C, By dropping the dependence on the histories of θ, constitutive equations of nonlocal thermoelastic solids ˙ = G[θ˙ (X , t), ∇ θ(X , t); θ(X, t), ∇ θ(X, t)] dV , V S (3.2.29) dV ≥ 0, G=G. V
The static portion of the constitutive equation remains unchanged. Hence, ∂F ∂G ∂F S
−ρ0 η = dV dV + U η , + +
∂θ ∂θ V V ∂ θ˙ S ∂F ∂F 1 dV , + 2T =
∂C ∂C V 1 ∂G (3.2.30) Q= dV + UQ , ∇θ θ V ∂∇ with
U η θ˙ + UQ · ∇ θ = 0.
(3.2.31)
3 The theory without heat conduction was given by Eringen and Edelen [1972] and Eringen [1972a] and with the heat conduction by Eringen [1974].
3.3 Memory-Dependent Nonlocal Thermofluids
43
The spatial forms of tkl and qk follow from (3.2.1): ρ xk,K xl,L TKL , ρ0 ρ xk,K QK . qk = ρ0
tkl = 2
(3.2.32)
3.3 Constitutive Equations of Memory-Dependent Nonlocal Thermofluids Fluids possess no natural states. Consequently, response functionals cannot depend on the independent variables referred to the natural state. But they must be functionals of a set of independent variables referred to the spatial frame at the present time t. If we let X → x in (1.2.4) we see that CKL → δKL ,
θ,K → θ,k .
Consequently, CKL cannot be an independent variable for ψ, but θ(x, t) and θ,k (x, t) can be. For fluids, then we must try C˙ KL as X → x. In this case, from (1.4.9), we have C˙ KL → dkl δkK δlL . Thus, the deformation-rate tensor dkl , which is shown to be objective, may be considered a proper independent variable for fluids. At rest, fluids possess pressure. But with X → x, the density ρ (at time t), which is related to the rest density ρ0 by ρ0 = det xk,K ρ
(3.3.1)
is eliminated, i.e., ρ0 = ρ. Consequently, we must reinstate the mass density ρ into the list of constitituve independent variables Y = {ρ(x , t ), dkl (x , t ), θ,k (x , t ), θ(x, t)}, x ∈ V, −∞ < t ≤ t.
(3.3.2)
The constitutive dependent variables are Z = {, tkl , qk }.
(3.3.3)
The free energy ψ = − θη can be considered to be independent of the memory, as discussed before. However, , η, tkl , and qk may depend on the list of variables Y. For ψ we propose a functional of the form F [ρ(x ), θ(x ); ρ(x), θ(x), |x − x|] dv , (3.3.4) ρψ = V
44
3 Constitutive Equations
where the dependence of the constitituve variables on the present time is surpressed, e.g., we wrote ρ(x ) for ρ(x , t). We assume that S
F =F .
(3.3.5)
The stress tensor and entropy are decomposed to static and dynamic parts, as usual, η = R η + D η,
tkl = R tkl + D tkl ,
R tkl
= −πδkl ,
where π is the thermodynamic pressure. For the C–D inequality (2.2.7) we have 1 ˙ ˙ ˙ −ρ(ψ + R ηθ + D ηθ ) + R tkl dkl + D tkl dkl + qk θ,k dv ≥ 0. θ V
(3.3.6)
(3.3.7)
Using (3.3.4) and (2.1.38a), we calculate S S ∂F
∂F ˙ ρ ψ = vk,k −ρ + F + F dv
− ρ
∂ρ ∂ρ V ∂F ∂F ∂F S
dv + + κ˙ dv + D, + θ˙
∂θ V ∂θ V ∂κ where κ = |x − x| and D=
We note that
∂F ∂ρ
S
∂F
v − ∂ρ k,k V S ∂F
˙ − θ + F vk,k − F vk,k dv . ∂θ ρ
vk,k − ρ
∂F ∂θ
S
θ˙
V
D dv = 0.
Substituting ρ ψ˙ into (3.3.7) we arrange this as S S ∂F ∂F + ρ
−π + ρ − F − F dv vk,k dv ∂ρ ∂ρ V V ∂F ∂F S
˙ − ρR η + dv θ dv + ∂θ
V V ∂θ ∂F 1
˙ − κ˙ dv − ρ D ηθ + D tkl dkl + qk θ,k dv ≥ 0. (3.3.8) θ V V ∂x Since F is independent of vk,k , θ˙ , and κ, ˙ for arbitrary and independent variations of these quantities throughout V, the inequality cannot be maintained in one sign.
3.3 Memory-Dependent Nonlocal Thermofluids
45
Hence, we have the necessary and sufficient conditions for the second law of thermodynamics not to be violated ∂F dv = 0, (3.3.9) ∂κ V S S ∂F
∂F π = ρ + ρ
− F − F dv , ∂ρ ∂ρ V ∂F S ∂F ρR η = − + dv , ∂θ
V ∂θ and −ρ D ηθ˙ + D tkl dkl +
1 qk θ,k − Kˆ ≥ 0, θ
where constitutive residual Kˆ is subject to Kˆ dv = 0.
(3.3.10) (3.3.11)
(3.3.12)
(3.3.13)
V
Thus, the thermodynamic pressure and the static part of the entropy are determined through the knowledge of the free energy density F . However, equation (3.3.9) places a severe restriction on F , since it must be true for all x. Hence we must have ∂F /∂κ = 0. In this case, the integration of (3.3.4) over V implies that ψ is a function of ρ(x), θ(x) and the surface mass and heat on ∂V. The surface energy arising from the surface tension and surface heat constitute such effects that are already accounted for in the jump conditions (2.1.39b) and (2.1.40b). Hence we take ψ = [ρ(x), θ(x)]. (3.3.14) This then gives, for the thermodynamic pressure and static part of the entropy, the classical (local) thermodynamic pressure and entropy, namely, π = ρ2
∂ , ∂ρ
Rη
=−
∂ . ∂θ
(3.3.15)
Hence, we conclude that: In fluid continuum the pressure and static entropy do not possess nonlocality. The C–D inequality (3.3.12), for the dynamical parts, is cast in the form (2.3.1) with Kˆ satisfying (2.3.2) by introducing vectors in the 10-dimensional space DY
= {θ˙ , dkl , θ,k },
DJ
Then (3.3.12) reads DJ
= {−ρ D η, D tkl , qk /θ}.
· D Y − Kˆ ≥ 0.
(3.3.16)
(3.3.17)
46
3 Constitutive Equations
Consequently, from (2.3.3) we obtain the dynamic constitutive equations ∂ + U η, ∂ θ˙ ∂ + Uklt , D tkl = ∂dkl 1 ∂ q + Uk , qk = θ ∂θ,k
−ρ D η =
(3.3.18) q
where is the dissipation potential and U η , Uklt , and Uk are the constitutive residuals subject to ˙ η + Ut · d + Uq · ∇ θ = 0. θU
(3.3.19)
This means that the constitutive residuals do not cause dissipation. Parallel to the development in Section 3.2, (equivalent to (3.3.16)) we introduce the notation J = {−ρ D η, D t, q/θ} , Y(x, t) = {θ˙ (x, t), d(x, t), ∇ θ(x, t)}, ω(x, t) = {ρ, θ},
U = {U η , Ut , U q },
(3.3.20)
and Y(t) (x, τ ) = Y(x, t − τ ) − Y(x, t).
(3.3.21)
With these, (3.3.18) and (3.3.19) read ∂ + U, ∂Y
J=
U · Y = 0.
(3.3.22)
The dissipation potential will depend on the history of its independent variables at all points of the body, i.e., it is a space–time functional. We express in the form
∞
=
∞
dτ 0
dτ 0
V
G[Y(t) (x , τ ); Y(t) (x, τ )] dv ,
(3.3.23)
where G may also depend on ω {ρ, θ}. With the use of (3.3.6) and (3.3.15), equation (3.2.26) of the energy balance is reduced to −ρθ(R η˙ + D η) ˙ + D tkl dkl + qk,k + ρh = 0.
(3.3.24)
3.3 Memory-Dependent Nonlocal Thermofluids
47
Thermoviscous Fluids without Memory4 For thermoviscous fluids that do not depend on the history of the independent variables we drop the memory dependence. In this case, we have =
V
˙ G(θ˙ , dkl , θ,k ) dv ,
S
G=G.
The dynamic parts of the constitutive equations are then given by ∂G
dv + U η , −ρ D η = V ∂ θ˙ ∂G t = dv + Uklt , D kl ∂d kl V 1 ∂G q dv + Uk , qk = θ V ∂θ,k
(3.3.25)
(3.3.26)
with the constitutive residuals subject to θ˙ U η + d · Ut + Uq · ∇ θ = 0.
(3.3.27)
The static parts (3.3.15) of the constitutive equations remain unchanged. For nonviscous fluids G does not depend on dkl so that D tkl = 0. For isothermal inviscid fluids D t, D η, and q are absent. Such fluids are called ideal fluids. By selecting polynomials for G in terms of its variables, special constitutive equations can be constructed involving various order terms up to some specified degree, e.g., linear, quadratic degrees. We shall be concerned mostly with the linear viscous effects.
Problems 3.1 For isotropic thermoelastic solids without memory determine the final forms of the nonlocal, nonlinear constitutive equations, assuming that the constitutive residuals vanish. 3.2 For nonlocal thermoviscous fluids without memory the dissipation potential depends on the invariants of d and ∇ θ. Determine the final forms of the constitutive equations, assuming that the constitutive residuals vanish. 3.3 For local, linearly memory-dependent fluids, investigate the consequences of the second law of thermodynamics. 4 The theory was given by Eringen [1972b]. In this paper the inclusion of the density difference ρ(x ) − ρ(x) as a constitutive independent variable in the free energy ψ led to surface tension effect which may not be valid for homogeneous fluids except near the surface of fluids.
48
3 Constitutive Equations
3.4 A gas with constitutive equations for pressure p given by p=
Rθρ − aρ 2 1 − bρ
is called a Van der Waals gas. Here R, b, and a are constants. Show that = cv (θ) dθ − aρ. Express ρ and p as a function of θ only. 3.5 (Short Term Paper.) Write a short account on the entropy concept based on statistical mechanics.
4 Nonlocal Electromagnetic Theory
4.0 Scope The interaction of electromagnetic (E-M) fields with deformable bodies requires new concepts. Here we need to extend the Maxwell equations to nonlocal media, i.e., to write global balance laws involving E-M fields. This is achieved in Section 4.1. The localization involves some E-M residuals. Here too we are able to incorporate the nonlocal residuals into the E-M fields. In this way, there remains one surface residual only, relevant to the jump conditions on the magnetic field. Electromagnetic force, couples, and power are discussed in Section 4.2, where we also give the expressions of the stress tensor, the E-M momentum, and the Poynting vector that enter into the mechanical balance equations. In order to account for jump discontinuities at a moving discontinuity surface σ through the body, we need the jump discontinuities of the E-M force, couples, and power. This is elaborated on in Section 4.3. We are now ready to write the expressions for the mechanical balance laws for electromechanically active media. This is done in Section 4.4. The energy balance equation and the Clausius–Duhem (C–D) inequality are obtained for the development of the constitutive equation’s E-M elastic solids.
4.1 Electromagnetic Balance Laws The E-M balance laws can be obtained by applying the Lorentz invariance group to the energy balance laws, since they are relativistically invariant. Here we are concerned with nonrelativistic approximation. It is simpler to approach the subject
50
4 Nonlocal Electromagnetic Theory
Figure 4.1.1. Moving discontinuity surface σ (t). by the statement of the Maxwell equations in global form. To this end, we need to write the balance laws over a volume and on an open surface. Let V(t) be a simply connected open material region of E 3 with a regular boundary ∂V(t). A discontinuity surface σ (t) is sweeping V with its own velocity u, Figure 4.1.1. Then two of the Maxwell equations, in nonrelativistically moving matter in V − σ , may be stated as: Gauss’ Law
∂ V −σ
D · da −
V −σ
qe dv = 0.
(4.1.1)
Conservation of Magnetic Flux ∂ V −σ
B · da = 0,
(4.1.2)
where D, B, and qe are, respectively, the dielectric displacement vector, the magnetic flux vector, and the free charge density in a fixed laboratory frame RG . The second set of the Maxwell equations are concerned with balance laws on an open material surface S(t) with boundary ∂S(t). A discontinuity line γ (t) may be sweeping S. The exterior unit normal of S is denoted by n, Figure 4.1.2. The global statements of the remaining two E-M balance laws are: Faraday’s Law
1 d B · da + E · dx = 0. c dt S −γ ∂ S −γ
Ampère’s Law 1 d 1 D · da + J · da − H · dx = 0, c dt S −γ c S −γ ∂ S −γ
(4.1.3)
(4.1.4)
where c is the speed of light in vacuum. E and H are, respectively, the electric field vector and the magnetic field vector in a co-moving reference frame RC with
4.1 Electromagnetic Balance Laws
51
Figure 4.1.2. Material surface with discontinuity line γ (t).
the body. We use capital letters to denote the E-M fields in RG and script capital letters for the E-M field in RC . The two sets are related to each other by
1 E = E + v × B, c 1 B = B − v × E, c
1 H = H − v × D, c J = J − qe v,
(4.1.5)
when the surface charges and currents exist the balance laws become more involved. For the most general case, we refer the reader to Eringen and Maugin [1989, Section 3.9].
By means of the transport and the Green–Gauss and Stokes’ theorem (2.1.5) and (2.1.6), the balance laws (4.1.1) to (4.1.4) are converted to
∇ · D − qe ) dv + n · [D] da = 0, (∇ V −σ σ ∇ · B dv + n · [B] da = 0, V −σ
σ
52
4 Nonlocal Electromagnetic Theory
S −γ
S −γ
1 ∂B ∇ ∇ + v∇ · B + × E · da c ∂t 1 n × [E + u × B] · ds = 0, + c ∂ S −γ 1 ∂D 1 ∇ · D − ∇ × H + (J − qe v) · da + v∇ c ∂t c 1 n × [H − u × D] · ds = 0. + c ∂ S −γ
(4.1.6)
Note that we accept the nonexistence of the magnetic charge and the associated current. Consequently, the localization residuals for the equations (4.1.2) of the magnetic flux and (4.1.3) for the Faraday law are null. With this, the balance laws (4.1.1) to (4.1.4) are localized to ∇ · D − qe = −qˆ
ˆ n · [D] = Q V −σ
on σ,
qˆ dv = 0,
∇ ·B=0 n · [B] = 0 1 ∂B +∇ ×E = 0 c ∂t 1 n × [E + u × B] = 0 c 1 1 ∂D − ∇ × H + (J − Jˆ − qe v) = 0 c c ∂t 1 ˆ n × [H − u × D] = [n × H] c S −γ
in V − σ,
Jˆ · da = 0,
ˆ da = 0, Q
σ
in V − σ, on σ, in V − σ, on σ, in V − σ, on σ,
ˆ · ds = 0. [n × H]
γ
(4.1.7) The arguments advanced in Section 2.1, regarding the balance law residuals, are valid here too. In fact, here the influence zone of the E-M fields in the atomic scale is even smaller. The derivation of the microscopic Maxwell equations from the Lorentz theory of electrons shows that the residuals do not appear in the balance laws (see Eringen and Maugin [1989, p. 38], see also De Groot and Suttorp [1972, Chapter 1]). In the atomic scale we will have to resort to discrete atomic theories. However, in slightly larger scales, the microscopic balance laws are free of the residuals. Hence, for length scales of the orders of 5 to 10 lattice parameters it should be safe to dispense with the balance law residuals.
4.2 Electromagnetic Force, Couple, and Power
53
Alternatively, in a similar fashion to Secton 2.1-B, it is possible to reduce the nonlocal balance laws to local forms, by redefining ˆ qˆ = ∇ · D, ˆ D = D + D,
∨ ˆ − 1 u × D, ˆ H=H c ˆ ∂D Jˆ = − , ∂t
J = J − qe v, ˆ ˆ + n · [D], we = Q
(4.1.8)
and then writing D for D and J for J, the E-M balance laws (4.1.8) become ∇ · D − qe = 0 n · [D] = we ∇ · B = 0, n · [B] = 0 1 ∂B +∇ ×E = 0 c ∂t 1 n × [E + u × B] = 0 c 1 ∂D 1 −∇ ×H + J = 0 c ∂t c ∨ 1 n × [H − u × D] = n × [ H ] c
in V − σ,
(4.1.9a)
on σ, in V − σ,
(4.1.9b) (4.1.10a)
on σ,
(4.1.10b)
in V − σ,
(4.1.11a)
on σ,
(4.1.11b)
on V − σ,
(4.1.12a)
on σ.
(4.1.12b)
∨
Here we represents the surface charge and n × [ H ] the magnetic jump due to the creation of a surface σ . Except for this last term, the Maxwell equations keep their classical local forms. With the new definitions, the dielectric displacement D and the current vector J are nonlocal in character. Hence, we need to write nonlocal constitutive equations for the E-M response functions.
4.2 Electromagnetic Force, Couple, and Power Macroscopic expressions of the E-M force FE , the couple CE , and power W E are obtained by using the theory of electrons of Lorentz. A detailed account of this is given by De Groot and Suttorp [1972] (see also Eringen and Maugin [1989, Section 3.5] and a brief derivation by Eringen [1980, Section 10.6]: 1 ∇ E) · P + (∇ ∇ B) · M FE = qe E + J × B + (∇ c 1 1 ∂ + ∇ · (vP × B) + (P × B), c c ∂t 1 CE = P × E + M × B + v × (P × B), c ∂B ∂P E W = J·E+ ·E−M· + ∇ · [v(P · E)], ∂t ∂t
(4.2.1) (4.2.2) (4.2.3)
54
4 Nonlocal Electromagnetic Theory
where qe , P, and M are, respectively, the free charge density, the polarization vector, and the magnetization vector. The latter two are related to D and B by D = E + P,
B = H + M.
(4.2.4)
The E-M force, the couple, and power given above are expressed in terms of the fields in the fixed laboratory frame RG . In a co-moving reference frame RC , then can be expressed by using (4.1.5): ∗ 1 J + P ) × B + (P · ∇ )E E + (∇ ∇ B) · M , FE = qeE + (J c CE = P × E + M × B, E · (P/ρ)• − M · B˙ + J · E W E = FE · v + ρE
= FE · v + w E ,
(4.2.5) (4.2.6) (4.2.7)
where 1 M = M + v × P, c ∗ ˙ ∇ · v). P = P − (P · ∇ )v + P(∇
(4.2.8)
For some purposes, it may prove convenient to express the E-M force, the couple, and power in the form of the mechanical type of balance equations: ∂G = FE , ∂t E = CkE , klm tlm ∂ 1 2 ∇ · [v(E · P) − S] − (E + B 2 ) = W E , ∂t 2 ∇ · tE −
(4.2.9) (4.2.10) (4.2.11)
where tE , G, and S are, respectively, the E-M stress tensor, the E-M momentum, and the Poynting vector. They are defined by tE = P ⊗ E − B ⊗ M + E ⊗ E + B ⊗ B M · B)1, − 21 (E 2 + B 2 − 2M 1 G = E × B, c S = cE × H.
(4.2.12) (4.2.13) (4.2.14)
Expressions (4.2.9) to (4.2.11) are identities. They may be verified by substituting (4.2.12) to (4.2.14) into (4.2.9) to (4.2.11) and using the Maxwell equations. In the co-moving reference frame RC , the E-M momentum, and Poynting vectors are defined as 1 G = E × B, c E × H. S = cE
(4.2.15) (4.2.16)
4.3 Electromagnetic Force, Couple, and Power
55
These are related to G and S. Using (4.2.11), we can express the power W E in the alternative form: d 1 E 2 2 W = −ρ (4.2.17) (E + B ) + ∇ · [(tE + v ⊗ G) · v − S ]. dt 2ρ We emphasize that the pondermotive force, the couple, and power, which are deduced from the Lorentz theory of electrons, are basic notions. The E-M stress tensor, the E-M momentum, and the Poynting vector are notions that are derived from these, through identifies (4.2.9) to (4.2.11). Nevertheless, they are useful expressions in evaluating the E-M force, the couple, and power at a discontinuity surface.
4.3 Electromagnetic Force, Couple, and Power at a Discontinuity Surface The E-M loads (E-M force, couple, and power) possess jump discontinuities across a singular surface σ , which may be sweeping the body at a velocity u in the positive direction of the normal n of σ . In order to obtain their discontinuities, we evaluate the volume integrals of these loads. For example, for the E-M force FE we write, symbolically, FE dv = FE dv + Fˆ E da. (4.3.1) V
V −σ
σ
Employing (4.2.9) and introducing G = ρg, into the first integral on the right-hand side of (4.3.1), we have E ∇ · (tE + ρv ⊗ g) dv. F dv = − ρ g˙ dv + (4.3.2) V −σ
V −σ
V −σ
Using the transport and the Green–Gauss theorems (2.1.5b) and (2.1.6a) this may be transformed to read d FE dv = − G dv + n · (tE + v ⊗ G) da dt V −σ V −σ V −σ E n · [t + u ⊗ G]da. (4.3.3) − σ
From (4.3.3) it is clear that the E-M force acquires a jump discontinuity given by Fˆ = [Fˆ kE ]nk ,
E Fˆ kE ≡ (tkl + uk Gl )il .
(4.3.4)
Similarly, by integrating x × FE + CE and W E and using (4.2.2) and (4.2.3) we obtain the jump discontinuities on the E-M couple and the E-M power: ˆ E = [CE ˆE C Wˆ E = [Wˆ kE ]nk , k ]nk = x × [Fk ]nk , E Wˆ kE ≡ (tkl + uk Gl )vl − Sk − 21 (E 2 + B 2 )(vk − uk ).
(4.3.5)
These jump discontinuities must be incorporated into those of the mechanical ones.
56
4 Nonlocal Electromagnetic Theory
4.4 Mechanical Balance Laws The mechanical balance laws in V − σ , given by (2.1.38a) to (2.1.40b), remain valid if we consider that the applied loads consist of a sum of mechanical and E-M loads, i.e., ρf + FE , ρh + wE , (4.4.1) where f and h are of purely mechanical origin and FE and wE are of E-M origin. Note that only wE ≡ W E − FE · v enters into the energy equation, since FE · v cancels with the balance of linear momentum. The E-M loads are given by (4.2.1) to (4.2.3) which also include the E-M couple CE . The associated jump conditions to the mechanical balance laws are modified by the addition of the E-M jump conditions obtained in Section 4.3. Consequently, the balance laws for electromechanically active continua take the following forms: Conservation of Mass ∇ ·v =0 ρ˙ + ρ∇ [ρ(v − u)] · n = 0
in V − σ,
(4.4.2a)
on σ.
(4.4.2b)
Balance of Momentum tkl,k + ρ(fl − v˙l ) + FlE = 0 E l [tkl + tkl + uk Gl − ρvl (vk − uk )]nk = F
in V − σ,
(4.4.3a)
on σ.
(4.4.3b)
Balance of Angular Momentum t[kl] = E[k Pl] + B[k Ml] .
(4.4.4)
Balance of Energy E · (P/ρ)• ρ ˙ − tkl vl,k − ∇ · q − ρh − ρE ˙ − J · E = 0 in V − σ, + M·B + uk Gl )vl + qk − Sk on σ. − ρ + 21 v 2 + 21 (E 2 + B 2 ) (vk − uk )]nk = H
(4.4.5a)
E [(tkl + tkl
(4.4.5b)
We note that, in the case of Angular Momentum Balance, the jump condition is satisfied automatically and t[kl] is determined in terms of the E-M fields. The energy balance law (4.4.5a) is obtained by replacing ρh by ρh + w E in (2.1.33a), where wE is given by (4.2.7). In fact, all local balance laws follow from the global (integral) balance laws that include the E-M loads (force, couple, and energy). For this, we refer the reader to Eringen and Maugin [1989, Section 3.10]. The collections of the mechanical balance laws and the Maxwell equations constitute the complete set of balance laws of the electromagnetically active media.
4.4 Mechanical Balance Laws
57
Second Law of Thermodynamics The second law of thermodynamics has the same form as given by (2.2.2), namely, [ρ η˙ − (qk /θ),k − ρh/θ ] dv ≥ 0. (4.4.6) V
The energy balance law (4.4.5a), upon introducing the generalized free energy = − θη − ρ −1E · P,
(4.4.7)
takes the form ˙ + θ˙ η + θ η) ρ( ˙ − tkl vl,k − qk,k − ρh + Pk E˙k + Mk B˙ k − Jk Ek = 0. (4.4.8) Carrying ρh from this into (4.4.6), we obtain a generalized C–D inequality 1 1 ˙ + θ˙ η) + tkl vl,k + qk θ,k − Pk E˙k − Mk B˙ k + Jk Ek dv ≥ 0. −ρ( θ V θ (4.4.9) This inequality is fundamental to the development of the constitutive equations. The inequality appears to dictate that Ek and Bk are the E-M independent variables. However, this is not necessary. Other choices are possible, simply by introducing a Legendre transformation for a new choice of . In this book we select Ek and Bk as our E-M independent variables. From (4.4.4) it is clear that the stress tensor tkl is not a symmetric tensor. We introduce a symmetric tensor by t kl = t(kl) + E(k Pl) + B(k Ml) = t lk .
(4.4.10)
With this it is possible to express the energy balance law in terms of objective quantities. To this end, we replace in (4.4.5a) by = − ρ −1M · B.
(4.4.11)
˙ , we Upon substituting these into (4.4.5a), and using (4.2.8) to replace P˙ and M obtain ∗
∗
˙ + θ˙ η + θ η) J · E = 0, (4.4.12) ρ(ψ ˙ − t kl dkl − ∇ · q − ρh − E · P −B· M −J by where we also introduced the free energy ψ = ψ − θη.
(4.4.13)
Substituting ρh/θ, solved from (4.4.12), into the entropy inequality (4.4.6) we obtain ∗ ∗ 1 qk ˙ ˙ J · E dv ≥ 0. (4.4.14) −ρ(ψ + ηθ ) + t kl dkl + θ,k + E · P +B· M +J θ V θ
58
4 Nonlocal Electromagnetic Theory
From this inequality, it is clear that the E-M independent variables are now P and M. We observe that this inequality is constructed with the product terms whose constituents are objective, i.e., (t kl , qk , E , B ), as well as their factors (dkl , θ,k /θ, ∗
∗
P , M being objective vectors and tensors. Expressions (4.4.12) and (4.4.14) make it possible to express the energy and the C–D inequality in the reference state variables, defined by ρ0 ρ0 T KL = t (kl) XK,k XL,l , QK = qk XK,k , ρ ρ ρ0 ρ0 K = Pk XK,k , MK = Mk XK,k , ρ ρ BK = Bk xk,K . (4.4.15) EK = Ek xk,K , We calculate the time-rate of K and MK by using (1.4.8), (2.1.38a), and (4.2.8): ρ ∗ ρ0 ∗ ˙ K = 0 P k XK,k , M˙ K = (4.4.16) Mk XK,k . ρ ρ Using (4.4.15), (4.4.16), and dv = (ρ0 /ρ) dV in (4.4.12) and (4.4.14) we obtain the material form of the energy equation ˙ + ηθ˙ + ηθ ˙K ˙ ) − 21 T KL C˙ KL − QK,K − ρ0 h − EK ρ0 (ψ − BK M˙ K − JK EK = 0,
(4.4.17)
and the material form of the entropy inequality 1 1 ˙ + ηθ˙ ) + 1 T C˙ ˙K −ρ0 (ψ KL KL + QK θ,K + EK 2 θ V θ ˙ + BK MK + JK EK dV ≥ 0.
(4.4.18)
The use of the E-M independent variables EK and BK provide some simplicity in the field equations. Consequently, we introduce − ψ =ψ
1 1 EK K − BK MK , ρ0 ρ0
(4.4.19)
to express (4.4.17) and (4.4.18) in the forms ˙ − 21 T KL C˙ KL − QK,K − ρ0 h ρ0 (ψ˙ + ηθ˙ + ηθ) + K E˙K + MK B˙ K − JK EK = 0, 1 1 ˙ + 1 T KL C˙ KL + QK θ,K −ρ0 (ψ˙ + ηθ) 2 θ V θ − K E˙K − MK B˙ K + JK EK dV ≥ 0.
(4.4.20)
(4.4.21)
In this form, the C–D inequality (4.4.21) simplifies the development of the constitutive equations for solid media.
4.4 Mechanical Balance Laws
59
Problems 4.1 The E-M fields in a fixed laboratory frame and in a moving body are related by (4.1.5). Obtain these relationships from the relativistic invariance of these fields. 4.2 The E-M force, couple, and energy are given by (4.2.1) to (4.2.3). Show that (4.2.5) to (4.2.7) are equivalent to these. 4.3 Derive the identities (4.2.9) to (4.2.11). 4.4 Obtain the expression (4.4.5a) of the energy. 4.5 Obtain the expression (4.4.9) of the entropy inequality. 4.6 For nonlocal elastic solids the energy and entropy, given by (4.4.17) and (4.4.18), are suitable for the development of constitutive equations. Obtain these equations from (4.4.8) and (4.4.9). 4.7 Show that the Maxwell equations can be expressed as ∇ ×E +
1 ∗ P = 0, c
∇ ×H −
4.8 Obtain material forms of the Maxwell equations.
1 ∗ 1 D= J . c c
This page intentionally left blank
5 Constitutive Equations of Nonlocal Electromagnetic Media
5.0 Scope The formulation of the constitutive equations of electromagnetic (E-M) elastic solids must employ a special type of Helmholtz free-energy functions and a dissipation functional. To this end, we need to develop constitutive equations in the material frame of reference. Thus, the energy equations and the Clausius–Duhem (C–D) inequality are expressed in a material frame. Employing the additive functional, introduced in Section 3.2, we develop separate constitutive equations for the static and dynamic members of the constitutive-dependent variables. This is done by using the C–D inequality. The dynamic members of the constitutive equations require the introduction of the difference histories of the dependent variables. The resulting constitutive equations are nonlocal both in space and time. Section 5.2 develops the constitutive equations of the memory-dependent nonlocal E-M thermoviscous fluids. Here the development is in the spatial domain. From the constitutive equations obtained in this chapter many special results may be deduced by omitting memory, nonlocality, thermal effects, E-M effects, etc.
62
5 Constitutive Equations of Nonlocal Electromagnetic Media
5.1 Constitutive Equations of Memory-Dependent Nonlocal Electromagnetic Thermoelastic Solids1 The primitive independent variables of E-M thermoelastic solids consist of the array θ, xk,K , θ,k , Ek , Bk (5.1.1) and the dependent variables η, tkl , qk , Pk , Mk .
(5.1.2)
The internal energy will depend only on the independent invariants of the set (5.1.1) which are given by θ, CKL = xk,K xk,L ,
θ,K = θ,k xk,K ,
EK = Ek xk,K ,
(5.1.3)
at all points X of the body at all past times −∞ < t ≤ t. The free energy can only depend on these quantities (excluding θ,K ) at all points X of the body at time t. Thus, we propose ρ0 ψ(X, t) = F [C(X ), θ(X ), EK (X ), BK (X ), X ; V
C(X), θ(X), EK (X), BK (X), X] dV ,
(5.1.4)
where we suppressed the dependence on t, e.g., we wrote C(X ) ≡ C(X , t). The free energy is a symmetric functional, so that S
F =F .
(5.1.5)
Expressions of the energy (4.4.20) and the C–D inequality (4.4.21) may be expressed in a compact form by introducing the following ordered sets: Static Set = −ρ0R η, 21 R T KL , −R K , −R MK , R Y = θ, CKL , EK , BK .
(5.1.6)
= −ρ0D η, 21 D T KL , QK /θ, −D K , −D MK , JK , ˙ KL , θ,K , E˙K , B˙ K , EK . D Y = θ˙ , C
(5.1.7)
RJ
Dynamic Set DJ
The collections D J and D Y are called thermodynamic fluxes and thermodynamic forces, respectively. We shall refer to R J and R Y as thermostatic forces and fluxes. 1 The theory was first given by Eringen [1973a] and further elaborated on in Eringen [1984a,b,c], [1986], [1990], [1991].
5.1 Electromagnetic Thermoelastic Solids
63
With these, (4.4.20) and (4.4.21) are expressed in the form of scalar products, in 35-dimensional Euclidean space ˙ + D J · D Y + θ(QK /θ),K + ρ0 h = 0, (5.1.8) ˙ + D ηθ ˙ ) + RJ · RY −ρ0 (ψ˙ + R ηθ
˙ + D J · D Y dV ≥ 0. −ρ0 ψ˙ + R J · R Y
(5.1.9)
V
Since θ > 0, we also omitted the factor θ −1 from (5.1.9). The static part of the thermostatic fluxes R J can be obtained from the static part of (5.1.9). Using the notation (5.1.6) the free energy ψ, given by (5.1.4), is expressed by
F R Y(X ), X ; R Y(X), X dV . (5.1.10) ρ0 ψ = V
˙ We calculate ψ: ρ0 ψ˙ =
V
where
D≡ V
∂F + ∂RY
∂F ∂ R Y
∂F ˙ − · RY ∂ R Y
S
∂F ∂ R Y
˙ dV + D, · RY
(5.1.11)
˙ · R Y dV ,
(5.1.12)
S
where we used a prime to denote the dependence on X , e.g., R Y = R Y(X ). Also, S
a superscript S denotes symmetrization, i.e., interchange X and X . Since F = F , it follows that D dV = 0.
(5.1.13)
V
˙ we Substituting (5.1.11) into (5.1.9), and noting that F does not depend on R Y, obtain ∂F ∂F S dV . (5.1.14) + RJ = ∂ R Y
V ∂RY With this C–D inequality, (5.1.9) reduces to D J · D Y dV − D ≥ 0.
(5.1.15)
V
This inequality is in the form (2.3.1). From (2.3.3), it follows that DJ
=
∂ + U, ∂DY
(5.1.16)
64
5 Constitutive Equations of Nonlocal Electromagnetic Media
where is the dissipation functional and U is the constitituve residual that does not contribute to the dissipation of energy, i.e., DY
· U = 0.
(5.1.17)
In principle, (5.1.16) determines the dynamical parts of the constitutive equations. However, we need to specify the form of the dissipation potential . For nonlocal memory dependence, it is appropriate to introduce difference histories of the variable set D Y, i.e., D Y(t) (X, τ )
= D Y(X, t − τ ) − D Y(X, t).
(5.1.18)
The dissipation potential can then be expressed as
∞
=
∞
dτ 0
dτ 0
G[D Y(t) (X , τ ); D Y(t) (X, τ )] dV ,
(5.1.19)
V
where G is a symmetric function with respect to D Y(t) (X , τ ) and D Y(t) (X, τ ), i.e., G[D Y(t) (X , τ ); D Y(t) (X, τ )] = G[D Y(t) (X, τ ); D Y(t) (X , τ )].
(5.1.20)
Using (5.1.6) and (5.1.14) we have, for the specific forms of the static constitutive equations,
∂F S −ρ0R η = dV ,
∂θ V S ∂F ∂F 1 dV , +
2 R TKL = ∂CKL V ∂CKL ∂F ∂F S −R PK = dV , +
∂EK V ∂EK ∂F ∂F S −R MK = dV , +
∂BK V ∂BK and the dynamic parts (5.1.16):
∂F + ∂θ
(5.1.21)
5.1 Electromagnetic Thermoelastic Solids
−ρ D η = 1 2 D T KL
=
1 QK = θ −D K = −D MK = JK =
∂ + U η, ∂ θ˙ ∂ T + UKL , ∂ C˙ KL ∂ Q + UK , ∂θ,K ∂ + UKP , ∂ E˙K ∂ + UKM , ∂ B˙ K ∂ + UKJ . ∂EK
65
(5.1.22)
The passage to the spatial forms of the constitutive equations is provided through (4.4.15), namely, t kl = qk = Pk = Mk = Ek =
ρ T KL xk,K xl,L , ρ0 ρ QK xk,K , ρ0 ρ K xk,K , ρ0 ρ MK xk,K , ρ0 EK XK,k , Bk = BK XK,k .
(5.1.23)
Upon using (5.1.21), the energy takes the form −ρ0 (R ηθ ˙ + D ηθ ˙ + D ηθ˙ ) +
1 ˙ 2 D T KL CKL
+ QK,K + ρ0 h − D K E˙K − D MK B˙ K + JK EK = 0.(5.1.24)
Nonlocal Electromagnetic Solids without Memory2 We ignore the effects of the past motions, the thermal gradients, and the E-M fields. This implies that the functional ψ retains its form (5.1.10) but is reduced to
˙ ), θ,K (X ), X ; θ(X), ˙ = G θ(X θ,K (X), X dV , V
dV ≥ 0, V 2 Eringen [1974].
S
G = G,
(5.1.25)
66
5 Constitutive Equations of Nonlocal Electromagnetic Media
and vanishes with θ˙ and θ,K /θ. The constitutive equations now become ∂F ∂F S −ρ0R η = dV , +
∂θ ∂θ V S ∂F ∂F 1 dV , +
2 R T KL = ∂CKL V ∂CKL ∂F ∂F S −R K = dV , +
∂E ∂E K V K ∂F ∂F S −R MK = dV , +
∂BK V ∂BK ∂G ∂G S −ρ D η = dV , +
˙ ˙ ∂ θ ∂ θ V S QK ∂G ∂G dV . + =
θ ∂θ,K ∂θ,K V
(5.1.26)
The spatial forms follow using (5.1.23).
5.2 Constitutive Equations of Nonlocal Memory-Dependent Electromagnetic Thermoviscous Fluids For nonlocal, memory-dependent fluids, to the constitutive-dependent variables (3.3.2), are adjoined the E-M independent variables, so that list is now Y = ρ(x , t ), dkl (x , t ), θ,k (x , t ), θ(x , t ), Ek (x , t ), Bk (x , t ) , x ∈ V, −∞ < t ≤ t. (5.2.1) The constitutive-dependent variables are Z = {, tkl , qk , Pk , Mk , Jk }.
(5.2.2)
With the introduction of the free energy, is replaced by ψ and η, where ψ is not memory-dependent, but η is. As in Section 3.3, we may select a linear functional in the sense of Friedman and Katz (see Section 3.2): ρψ = F [ρ(x ), θ(x ), Ek (x ), Bk (x ); V
ρ(x), θ(x), Ek (x), Bk (x), |x − x|],
(5.2.3)
5.2 Electromagnetic Thermoviscous Fluids
67
where F is a symmetric function, i.e., S
F =F .
(5.2.4)
As usual, the superscript (S) denotes the symmetrization, i.e., the interchange of x and x in the argument functions of F . Again, we introduce the static and dynamic parts of the response functions by the left subscripts R and D: tkl = R tkl + D tkl , Pk = R Pk + D Pk ,
η = R η + D η, Mk = R Mk + D Mk .
(5.2.5)
The static parts of the constitutive equations can be obtained from the C–D inequality. In fact, it is free for our disposal. But we select them so that the dynamics part of the C–D inequality does not contain the static response functions. As in Section 3.3, we arrive at the condition ∂F (5.2.6) dv = 0, ∂κ V where κ = |x − x|. Since (5.2.6) must be true for all x, similar to the arguments leading to (3.3.4), we must have ∂F /∂κ = 0. This then naturally leads to ψ = [ρ(x, t), θ(x, t), Ek (x, t), Bk (x, t)], ∂ π = ρ2 , R tkl = −πδkl , ∂ρ ∂ , Rη = − ∂θ ∂ , R Pk = − ∂Ek ∂ . R Mk = − ∂Bk
(5.2.7)
With this, the C–D inequality (4.4.9) reduces to −ρ D ηθ˙ + D tkl vl,k +
1 qk θ,k − D Pk E˙k − D Mk B˙ k + Jk Ek − Kˆ ≥ 0. θ
(5.2.8)
With CE given by (4.2.6), from (4.4.4) we have tkl = t(kl) + t[kl] , t[kl] = E[k Pl] + B[k Ml] .
(5.2.9)
Substituting this into the C–D inequality (5.2.8), we express it as 1 ˙ −ρ D ηθ + D t kl dkl + qk θ,k − D Pk E k −D Mk B k +Jk Ek dv ≥ 0, θ V (5.2.10)
68
5 Constitutive Equations of Nonlocal Electromagnetic Media
where D t kl Ek
= D t(kl) + E(k Pl) + B(k Ml) = D t lk ,
= E˙k + El vl,k ,
B k = B˙ k + Bl vl,k .
(5.2.11)
The C–D inequality (5.2.10) is expressed in terms of the scalar products of the
objective variables {θ,k , dkl , E k , B k , Ek } and {qk /θ, express it in the compact local form DJ · DY
D t kl ,
−Pk , −Mk , Jk }. We
− Kˆ ≥ 0,
(5.2.12)
where DJ
= {−ρ D η,
DY
= {θ˙ , dkl ,
D t kl , qk /θ, −D Pk , θ,k , E k , B k , Ek }.
−D Mk , Jk }, (5.2.13)
The inequality (5.2.12) agrees with (2.3.1) so that the dynamic constitutive equations follow from (2.3.3), i.e., DJ
=
∂ + U, ∂DY
(5.2.14)
· U = 0.
(5.2.15)
where DY
Here is the dissipation function which vanishes with D Y. For the memory-dependent media, we introduce the difference histories D Y(t) (x, τ )
= D Y(x, t − τ ) − D Y(x, t).
(5.2.16)
We then propose for a linear functional
∞
=
∞
dτ 0
dτ 0
V
G[D Y(t) (x , τ ); D Y(t) (x, τ )] dv ,
(5.2.17)
where G is a symmetric function of D Y(t) (x , τ ) and D Y(t) (x, τ ), as described by (5.1.20): S G = G, dv ≥ 0, lim = 0. (5.2.18) V
G may also depend on {ρ, θ, Ek , Bk }.
D Y→0
5.2 Electromagnetic Thermoviscous Fluids
69
The dynamic parts of the constitutive equations memory-dependent, nonlocal thermofluids are then given by (5.2.14). More explicitly, ∞ ∞ ∂G
−ρ D η = dv + U η , dτ dτ
˙ ∂ θ V 0 ∞ 0 ∞ ∂G
dτ dτ dv + Ut , Dt = V ∂d 0 0 ∞ ∞ ∂G 1 dv + Uq , dτ dτ
q= ∇ θ) θ V ∂(∇ 0 0 ∞ ∞ ∞ ∂G
dτ dτ −D P = dv + U P , 0 0 0 ∂ ∞ E ∞ ∞ ∂G
−D M = dτ dτ
dv + U N , 0 0 0 ∂ ∞ B ∞ ∞ ∂G
dτ dτ
(5.2.19) dv + U J . J = E ∂E 0 0 0 Upon using (5.2.7), the energy equation (4.4.8) becomes ˙ + D tkl dkl + qk,k + ρh ˙ + D ηθ ˙ + D ηθ) −ρ(R ηθ − D Pk E˙k − D Mk B˙ k + Jk Ek = 0.
(5.2.20)
Nonlocal Thermoviscous Fluids without Memory3 In the case of the absence of the memory static parts of the constitutive equations, (5.2.7) remains unchanged. The dynamic part (5.2.19) is modified by dropping the dependence on difference histories. In this case, we have
˙ dkl , θ,k , Ek ) dv , G(θ˙ , dkl , θ,k , Ek ; θ, (5.2.21) = V
and we obtain
−ρ D η = D tkl
V
=
V 1 qk = θ V Jk = V
∂G
dv + U η , ∂ θ˙ ∂G dv + Uklt , ∂dkl ∂G q dv + Uk , ∂θ,k ∂G
dv + UkJ . ∂Ek
(5.2.22)
The constitutive residuals are subject to U η θ˙ + Uklt dkl + Uk θ,k + UkJ Ek = 0. q
3 The theory, without E-M effects, was given by Eringen [1972b].
(5.2.23)
70
5 Constitutive Equations of Nonlocal Electromagnetic Media
Clearly, from the foregoing sets of constitutive equations, one may obtain special and approximate theories. For example: (a) For nonviscous fluids we drop D t and the dependence on d. (b) For the isothermal case we omit q and the dependence on ∇ θ. (c) In the purely E-M case we ignore D η, t, q, and the corresponding independent variables θ˙ , d, and ∇ θ. (d) For the linear constitutive equations, for F and G, we write second-degree polynomials in terms of their independent variables. (e) For local theories (we express F and G in the form F = F0 δ(x )). G = G0 δ(x ), where δ(x ) is a three-dimensional delta function. Clearly many other possibilities exist.
Problems 5.1 Obtain the constitutive equations of isotropic nonlocal E-M elastic solids (without memory), in terms of the invariants of the independent variables. 5.2 Obtain the constitutive equations of nonlocal fluids (without memory) as functionals of the invariants of the independent variables. 5.3 For local linear, memory-dependent fluids, find the restrictions arising from the second law of thermodynamics. 5.4 For isothermal solid bodies (no deformation) express the nonlocal isotropic E-M constitutive equations in terms of the invariants of the independent variables up to and including the second degree. 5.5 For E-M fluids obtain the pressure as functions of the mechanical and E-M variables. 5.6 (Short Term Paper.) Study the literature and give a discussion on the group properties of E-M elastic crystals.
6 Nonlocal Linear Elasticity
6.0 Scope In Chapter 3, we obtained the general constitutive equations of the memorydependent nonlocal elastic solids. With practical applications in mind, we construct here specific constitutive equations for the nonlocal linear elastic solids. To this end, in Section 6.1, we introduce a measure for the order of magnitude evaluation. With a linear strain measure ekl and small temperature changes T from a constant ambient temperature T0 , we write a quadratic free-energy functional in terms of ekl and T , and a dissipation functional in terms of T,k . The constitutive equations for the nonlocal anisotropic elastic solids are then obtained by using the equations given in Chapter 3. Afterward, we pass to the constitutive equations for the isotropic solids. Various different, but equivalent, forms of these equations are presented. In Section 6.2 we show how one may obtain the same constitutive equations through the lattice dynamical approach. This way relations are established between the nonlocal constitutive moduli based on the continuum and atomic lattice dynamics. This then leads us to determine material moduli for crystal classes. For the isotropic case, generalized functions and Dirac-delta sequences offer a rich field for the selection of the material moduli. In fact, it turns out that, we can construct nonlocal elastic moduli that give exactly the same displacement at the atomic sites but not necessarily between atoms. All these material moduli obey the axioms of the attenuating neighborhood. Material stability is dealt with in Section 6.3.
72
6 Nonlocal Linear Elasticity
In Section 6.4 we give the field equations of nonlocal thermoelasticity, and formulate mixed boundary-initial value problems. The formulation by means of convolution offers many facilities in proving some important theorems. This is formulated in this section. In Section 6.5 we prove the uniqueness theorem for mixed boundary-initial value problems. Theorems on power and energy are the subject of Section 6.6. In Section 6.7 the reciprocal theorem is proved. This theorem is useful in constructing solutions for the boundary-initial value problems from those of the fundamental solutions. Section 6.8 discusses the most general, and a special form, of the variational principles. These are important for constructing the approximate solutions of the boundary-initial value problems. Section 6.9 contains various approximate models for the reduction of the integro– partial differential equations to partial differential equations. By means of some operators, suggested by lattice dynamics, generalized functions (with finite support), Dirac-delta sequences, and other considerations, it has been possible to achieve such reductions. These are all explored in Section 6.9. In Section 6.10 we begin to solve some critical problems to demonstrate the power and potential of the nonlocality. Screw dislocations in full- and half-planes are discussed in Section 6.10. Here, for the first time, we find that at the core of dislocation the stress vanishes and with it the classical singularity. The maximum stress appears slightly apart from the core, thus allowing the establishment of a maximum stress hypothesis as a criterium of fracture. In fact, the cohesive stress calculated agrees with that observed experimentally. All these predictions are supported by the solutions of many other problems treated later in this chapter. These include edge dislocation (Section 6.11), screw dislocation in nonlocal hexagonal solids (Section 6.12), nonlocal stress fields at the Griffith crack (Section 6.14), and line cracks subject to shear (Section 6.15). The continuous distribution of dislocation is dealt with in Section 6.13. A Peach– Koehler-type formula is obtained and applied to several special distributions, e.g., finite line distribution and the uniform distribution of screws along a circle. Again, no stress singularity is predicted. The interaction of a dislocation with a crack is discussed in Section 6.16 and the interaction between defect and dislocation in Section 6.17. Section 6.18 discusses the case of straight wedge disclinations. In Section 6.19, we obtain a Somigliana-type representation of nonlocal elasticity. In the following section, we apply this representation to obtain the solution of the fundamental problems, namely the concentrated load in infinite space. A nonlocal elastic half-plane under a concentrated force is presented in Section 6.21. Chapter 6 ends with the treatment of a rigid stamp on a nonlocal elastic half-plane. From all these solutions one reaches the conclusions: (a) Nonlocal solutions eliminate singularities predicted by the classical (local) theory of elasticity.
6.1 Linear Constitutive Equations
73
(b) Maximum stress can be used to calculate the cohesive stress that holds atomic bonds together. (c) Classical elasticity is obtained when the nonlocal moduli become Diracdelta functions. (d) The cohesive stress calculated agrees very well with the lattice dynamical results and experimental observations. These overwhelming results should convince the fracture mechanics community that there is no need for all those ersatz regarding fracture criteria (e.g., energy, fracture toughness, J -integral, etc.).
6.1 Linear Constitutive Equations1 In Section 3.2 we obtained the constitutive equations of the nonlocal thermoelastic solids without memory. For the linear theory, constitutive residuals are ignored (Onsager postulate). We ignore the dependence on θ˙ which may be important in rigid conductors. With this, the general constitutive equations (3.2.30) and (3.2.32) take the form 1 ∂F S ∂F η=− + dV , ρ0 V ∂θ ∂θ
S ∂F ρ ∂F tkl = 2 xk,K xl,L dV , +
ρ0 ∂CKL V ∂CKL 1 ∂G ρ xk,K dV . (6.1.1) qk = θ ρ0 ∂θ ,k V Of course D T and D η vanish. When the deformation and thermal gradients are small, we can derive a linear theory from (6.1.1). To this end, we introduce the displacement vector u and temperature change T by u = x − X, T = θ − T0 ,
T0 |T |,
T0 > 0
(6.1.2)
where T0 is a constant ambient temperature of the order of room temperature. To have systematic approximation we let W = (u,k , T,k , T ),
(6.1.3)
= W = (W · W)1/2
(6.1.4)
with norm
1 Eringen [1972a], [1974].
74
6 Nonlocal Linear Elasticity
and we assume that, in some neighborhood of = 0, there exist positive constant K0 and positive integer n such that O( n ) ≤ K0 n ,
K0 > 0,
n > 0.
(6.1.5)
With this measure, for the first order (linear) approximation, we have xk,K = (δkl + uk,l )δlK + O( 2 ),
vk =
∂uk + O( 2 ), ∂t
XK,k = (δkl − ul,k )δlK + O( 2 ), ρ = 1 − uk,k + O( 2 ), θ,k = T,k + O( 2 ). (6.1.6) ρ0 We introduce the Lagrangian and Eulerian strain tensors EKL and ekl by EKL = 21 (CKL − δKL ) = ekl xk,K xl,L ,
(6.1.7)
which upon substitution from (6.1.6) for xk,K gives EKL = ekl δkK δlL + O( 2 ),
ekl ≡ 21 (uk,l + ul,k ).
For the linear theory, (6.1.1) takes the form ∂F ∂F S 1 dv , + η=− ρ0 V ∂T ∂T
∂F ∂F S tkl = dv , +
∂ekl V ∂ekl 1 ∂G qk = dv . T0 V ∂T,k
(6.1.8)
(6.1.9)
Here F and G are expressed as second-degree polynomials in their variables ρ0 C
T T − 21 βkl (T ekl + T ekl ) + U, T0
T0 G = G0 + 21 kij (T,i T,j + T,i T,j ) + 21 hij k (eij T,k + eij T,k ), (6.1.10) F = F0 −
where U is the strain energy density, defined by
1 ρ0 C T T + λij kl eij ekl . U=2 T0
(6.1.11)
The material moduli F0 , G0 , and ρ0 are constants, and the remaining material functions are subject to the following symmetry regulations, as can be deduced S
S
from (6.1.10) and the fact that F = F and G = G: C(x, x ) = C(x , x), βkl (x, x ) = βkl (x , x) = βlk (x, x ), λij kl (x, x ) = λij kl (x , x) = λj ikl (x, x ) = λij lk (x, x ), kij (x, x ) = kij (x , x) = kj i (x, x ), hij k (x, x ) = hij k (x , x) = hj ik (x, x ).
(6.1.12)
6.1 Linear Constitutive Equations
75
The material moduli (6.1.12) are also restricted by the material symmetry conditions and the condition of the material stability. The former is expressed by the symmetry group and the latter by the thermodynamic requirements that both the total strain energy and the total dissipation must be nonmagnetic, i.e., U= U dv dv ≥ 0, (6.1.13) V V = G dv dv ≥ 0. (6.1.14) V
V
and T , it cannot be But, because is a linear functional with respect to eij ,k maintained in one sign unless hij k = 0, and we have:
T0 G = G0 + 21 kij (T,i T,j + T,i T,j ).
(6.1.15)
We now substitute F from (6.1.10) and G from (6.1.15) into (6.1.9) to obtain the linear constitutive equations of the nonlocal, anisotropic, thermoelastic solids2 T (x ) 1 C(x , x) η= + βkl (x , x)ekl (x ) dv , T0 ρ0 V tkl = [−βkl (x , x)T (x ) + λij kl (x , x)eij (x )] dv , V kkl (x , x)T,l (x ) dv . (6.1.16) qk = V
Isotropic Solids For the homogeneous media, F0 , βkl , λij kl , and kij are functions of x − x, e.g., λij kl = λij kl (x − x),
(6.1.17)
and for homogeneous and isotropic solids they are isotropic functions of κ = x −x, i.e., C = C(|x − x|), βkl = βδkl + β1 κk κl , λij kl = λδij δkl + µ(δik δj l + δil δj k ) + λ1 (κi κj δkl + κk κl δij ) + λ2 κi κj κk κl , kkl = kδkl + k1 κk κl ,
(6.1.18)
where the material moduli β, β1 , λ, µ, λ1 , λ2 , k, and k1 are functions of κ = |κκ | = |x − x|, e.g., k1 = k1 (|x − x|). (6.1.19) λ = λ(|x − x|), 2 Eringen [1972a], [1974].
76
6 Nonlocal Linear Elasticity
The material moduli β1 , λ1 , λ2 and k1 are interatomic contributions to the isotropy. They are absent in classical (local) elasticity. Because of the products of these moduli with κi = xi − xi , we expect that these moduli are generally smaller in magnitude than β, λ, µ, and k. Moreover, lattice dynamical observations have shown that interatomic forces die out with distance, (attenuating neighborhood hypothesis, Section 3.1). Hence, within a first-order approximation we drop these terms T (x ) β(|x − x|)
η= C(|x − x|) + ekk (x ) dv , T0 ρ0 V
tkl = −β(|x − x|)T (x )δkl + λ(|x − x|)err (x )δkl V + 2µ(|x − x|)ekl (x ) dv , qk = k(|x − x|)T,k (x ) dv . (6.1.20) V
We observe that these constitutive equations reduce to those of the classical (local) elasticity, by letting {C(κ), β(κ), λ(κ), µ(κ), k(κ)} → {C0 , β0 , λ0 , µ0 , k0 }δ(κ),
(6.1.21)
where δ(κ) is the Dirac-delta measure. It is well known that interatomic attractions die out with distance (attenuation neighborhood). This implies that the material functions C, β, λ, µ, and k must attenuate rapidly with distance, i.e., lim {C(κ), β(κ), λ(κ), µ(κ), k(κ)} → 0.
κ→∞
(6.1.22)
A great deal of simplification would result if we assume that the degree of attenuation for all material moduli is the same, i.e., C(|x − x|) β(|x − x|) λ(|x − x|) µ(|x − x|) = = = C0 β0 λ0 µ0
k(|x − x|) = α(|x − x|), (6.1.23) = k0 where C0 , β0 , λ0 , µ0 , and k0 are the material constants of the local (classical) theory, i.e., β0 ekk , ρ0 σkl = −β0 T δkl + λ0 err δkl + 2µ0 ekl , C qk = k0 T,k . Cη
= C0 T +
(6.1.24)
Here, C η is the local entropy density, σkl is the Hookean stress tensor, and C qk is the local heat vector. The kernel function α(|x −x|) is normalized over the volume of the body, i.e., V
α(|x |) dv = 1.
(6.1.25)
6.1 Linear Constitutive Equations
With these constitutive equations, (6.1.20), are abbreviated to η= α(|x − x|) C η(x ) dv , V tkl = α(|x − x|)σkl (x ) dv , V qk = α(|x − x|) C qk (x ) dv . V
77
(6.1.26)
From (6.1.26) it is clear that the kernel function α(|x − x|) has the dimension length−3 . Consequently, it must depend on an internal characteristic length. This then indicates that, unlike the classical (local) elasticity, in the nonlocal theory of elasticity, predictions are influenced by an internal characteristic length. This will also be indicated through the solution of some problems presented in later sections. In fact, it is possible to fix this characteristic length with respect to the external scales involved in problems. We shall show that by means of the nonlocal theory of elasticity, it is possible to discuss problems all the way to the atomic scales. Remark. Clearly, the constitutive equations (6.1.16) may be expressed in forms that display the local constitutive equations explicitly, i.e.,
T 1 0 1
T (x )
η = C0 + βkl ekl + C (x, x ) + βkl (x, x )ekl (x ) dv , T0 ρ0 T0 ρ0 V 0
tkl = −βkl T + λ0ij kl eij + [−βkl (x, x )T (x ) + λ ij kl (x, x )eij (x )] dv , V 0
T,l + kkl (x, x )T,l (x ) dv . (6.1.27) qk = kkl V
In fact, originally they were derived in this form, even including the initial fields in the natural state, Eringen [1972a]. This form follows by simply expressing C(x, x) = C0 δ(x − x ) + C (x, x ), 0
βkl (x, x ) = βkl δ(x − x ) + βkl (x, x ),
λij kl (x, x ) = λ0ij kl δ(x − x ) + λ ij kl (x, x ), 0
kkl (x, x ) = kkl δ(x − x ) + kkl (x, x ), 0, C0 , βkl
λ0ij kl ,
(6.1.28)
0 kkl
where and are constant moduli of the local theory and δ(x) is the Dirac-delta measure. Clearly this format is also valid for the homogeneous and isotropic case (6.1.20), and similarly obtained T β0 T (x ) β (|x − x |) η = C0 + ekl + C (|x − x |) + ekk (x ) dv , T0 ρ0 T0 ρ0 V tkl = −β0 T + λ0 err δkl + 2µ0 ekl + [−β (|x − x |)T (x )δkl V
+ λ (|x − x |)err (x )δkl + 2µ (|x − x |)ekl (x )] dv , qk = k0 T,k + k (|x − x |)T,k (x ) dv . V
(6.1.29)
78
6 Nonlocal Linear Elasticity
6.2 Lattice Dynamical Foundations of Linear Elasticity Here, I would like to consider a simple lattice to illustrate how we can obtain the constitutive equations of the nonlocal isothermal elastic solids. According to lattice dynamics, a perfect crystal consists of discrete atomic mass points attached to each other by springs (Figure 6.2.1). Let u(n) denote the displacement vector of an atom located at a discrete point marked by n from the equilibrium position x0 (n). Let ek denote a set of base vectors and ek their reciprocal, so that ek · el = δ kl ,
Figure 6.2.1. Atomic model.
6.2 Lattice Dynamical Foundations of Linear Elasticity
79
where δ kl is the Kronecker delta. We may locate the undeformed position x0 (n) and the deformed position x(n) of an atom by (Figure 6.2.1b): x0 (n) = nk ek ,
x(n) = x0 (n) + u(n).
(6.2.1)
For a net consisting of atoms that are located at the knots (corners) of a parallelepiped with equal edge lengths parallel to ek , nk may be taken as integers. Such a lattice is called a simple lattice or a Bravais lattice. The potential energy (internal energy) of such a lattice is a function of the distance between atoms, i.e., V = U [|x(n) − x(n )|]. (6.2.2) n,n
A mechanical analogy to this is a spring where the restoring force is a function of the change of the length of the spring. In harmonic approximation, it is simple to show that a quadratic approximation to V prevails. Thus, we may express V as V = 21 uk (n)Ukl (n, n )ul (n ), (6.2.3) n,n
where a constant potential energy corresponding to the equilibrium position is discarded and (6.2.4) Ukl (n, n ) = U,kl (|x(n) − x0 (n )|). The Lagrangian of the system is given by ˙ ˙ L = 21 m(n)u(n) · u(n) n
−
1 2
u(n) · U(n, n ) · u(n ) −
n,n
f(n) · u(n),
(6.2.5)
n
where m(n) is the mass of the nth atom and f(n) is the external force applied to the atom. Lagrange’s equation reads: m(u)u¨ + U(n, n ) · u(n ) − f(n) = 0. (6.2.6) n
This is the basic equation, underlying the nonrelativistic lattice dynamics. We would now like to pass to nonlocal representation, sometimes also called quasi-continuum representation. To this end, one may employ the concept of the sampling function introduced by Shannon [1949]. According to this theorem, if the Fourier transform f (k) of a function f (x) vanishes outside a region |k| > k0 , then this function is determined uniquely from its discrete values f (n) = f (x) at x = n. In fact, if f (k) = v0 f (n)ein·k (6.2.7) n
80
6 Nonlocal Linear Elasticity
is the Fourier transform of f (x), then the inverse transform is given by f (x) = v0 f (n)δB (x − n),
(6.2.8)
n
where δB (x) = (2π)−3
eik·x dk,
(6.2.9)
B
where v0 is the volume of an elementary cell constructed on ek . For a simple lattice with lattice parameter a, |ek | = a, v0 = a 3 , and the domain of k is 0 < |k| < π/a. It is clear that δB (0) = v0−1 and δB (n) = 0 for all other n = 0. It is important to note that f (x), given by (6.2.8), coincides exactly with f (n) at discrete points x = n, however, being completely arbitrary elsewhere. Thus, we expect that the predictions of the nonlocal theory will agree with those of the lattice dynamics at the atomic sites, differing possibly in between. Using Shannon’s theorem, we have the nonlocal representation of (6.2.3) and (6.2.6): V = 21 u(x) · U(x, x ) · u(x ) dv(x ), (6.2.10) V V ρ u¨ + U(x, x ) · u(x ) dv(x ) − ρf(x) = 0, (6.2.11) V
where ρ(x) is the mass density and U kl (x, x ) = U lk (x , x).
(6.2.12)
The invariance of U under rigid translations and rotations shows that the Fourier transform can be expressed as U (k, k ) = λ kl
ikj l
(k , k)ki kj ,
(6.2.13)
where the overbar denotes the Fourier transform. Substituting the Fourier inversion of the operator (6.2.13) into (6.2.10) and (6.2.11) we obtain V = 21 λij kl (x , x)eij (x)ekl (x ) dv dv , (6.2.14) V
V
t kl,k + ρ(f l − u¨ l ) = 0, where t kl =
δV = λij kl (x, x )eij (x ) dv , δekl V eij = 21 (ui,j + uj,i ).
(6.2.15)
(6.2.16) (6.2.17)
Here δV /δekl denotes the functional partial derivative. If the material properties vary slowly over a distance d, then λij kl (x, x ) = λ0 δB (x − x), ij kl
(6.2.18)
6.2 Lattice Dynamical Foundations of Linear Elasticity
81
ij kl
where λ0 are the elastic moduli of the zeroth order with respect to d. In the limit, as the internal characteristic length a approaches zero, δB becomes a Diracdelta measure and (6.2.16) gives the classical Hooke’s law. Comparing (6.2.16) with (6.1.16)2 and setting βkl = 0 (the isothermal case) we see that we have the identical constitutive equation obtained through continuum theory. The method presented here suggests that we can determine the material functions such as λij kl by comparing the nonlocal results of calculations with those of lattice dynamics. In fact, δB (x) has been determined for some crystals. For cubic crystals, δB has the simple form
δB (x − x ) = π
−3
3 i=1
π(xi − xi ) 1 sin ,
xi − xi a
(6.2.19)
where a is the lattice parameter. Another simple case is the so-called Debye continuum, which corresponds to the case of a spherical Brillouin zone, with radius κ = π/a. For this case, we have (cf. Kunin [1983, p. 37]): √ sin(κr) κ δB (x) = (6.2.20) − cos(κr) , r = x · x, 2 2 2π r κr for the three-dimensional case, and δB (x) =
κ J1 (κr) 2πr
(6.2.21)
for the two-dimensional case. There are other cases for the isotropic media. In fact, the nonlocal kernel α(|x −x |) can also be determined as a solution of a differential equation (see Sections 6.9 and 6.13). For engineering materials, it is useful to select other kernel functions to give a better match with the dispersion curves in the neighborhood of k = 0 (long wavelength). We give a summary of the important observations: (a) In nonlocal elasticity, the total internal energy is a functional of the strain. (b) The internal energy density coincides with those of the lattice dynamics at the discrete points occupied by the atoms. (c) The stress field predicted at the atomic sites are identical in both the nonlocal elasticity and the lattice dynamics. (d) Nonlocal elastic moduli can be determined from the interatomic potential. (e) In the limit when the internal characteristic length (e.g., lattice parameter a) goes to zero, nonlocal elasticity reduces to classical (local) elasticity.
82
6 Nonlocal Linear Elasticity
The development given above is for the harmonic approximation and nondissipative systems. In general, the interatomic potential is a nonlinear function of the atomic spacings. The harmonic approximation is valid only in the neighborhood of the minimum of the interatomic potential. When dislocations, holes, and impurities are present (as in the case of real materials) dissipations play a major role. In such situations, it is very difficult (if not impossible) to construct a nonlocal theory based on lattice dynamics. A continuum approach, on the other hand, is possible, as shown in Section 3.2. Thus, the nonlocal continuum theory makes sense as an independent discipline.
6.3
Material Stability
As the strains and temperature increase (decrease), it is expected that the strain energy U increases (decreases). Also the thermodynamic stability requires that the dissipation of energy must be nonnegative. Hence, we must have ρ0 C
U = 21 T T + λij kl eij ekl dv dv ≥ 0, (6.3.1) T0 V V kij
= 21 T T dv dv ≥ 0. (6.3.2) 2 ,i ,j V V T0 These conditions place restrictions on the material functions C, λij kl , and kij . Since the thermal effects are not coupled with the strains, from (6.3.1) it follows that ρ0 UT = CT T dv dv ≥ 0, (6.3.3) 2T0 V V
UE = 21 λij kl eij ekl dv dv ≥ 0. (6.3.4) V
V
Thus, we must have UT ≥ 0,
UE ≥ 0,
≥ 0,
(6.3.5)
for any arbitrary temperature, strain, and temperature gradient distributions.
6.4 Field Equations of Nonlocal Linear Elasticity For nonlocal linear elastic solids, we have the two surviving balance laws (2.1.39a) and (2.1.40a), namely tkl,k + ρ(fl − u¨ l ) = 0, −ρ ˙ + tkl vl,k + qk,k + ρh = 0,
(6.4.1) (6.4.2)
since the density is considered to be constant to a first degree approximation. Upon introducing the Helmholtz free energy ψ = −θη into (6.4.2), the energy equation becomes −ρ(ψ˙ + ηθ ˙ + ηθ˙ ) + tkl vl,k + qk,k + ρh = 0. (6.4.3)
6.4 Field Equations of Nonlocal Linear Elasticity
Since no viscous dissipation is present, by introducing η = ψ = (ρ, θ, ekl ), the energy equation (6.4.3) becomes
R η, tkl
=
−ρθ η˙ + qk,k + ρh = 0,
83
R tkl ,
and
(6.4.4)
which also follows from (3.2.28) upon using (3.2.32). The constitutive equations for homogeneous elastic solids are given by (6.1.16): T (x ) 1 η= C(x − x) + βkl (x − x)ekl (x ) dv(x ), T0 ρ V
tkl = −βkl (x − x)T (x ) + λij kl (x − x)eij (x ) dv(x ), V qk = kkl (x − x)T,l (x ) dv(x ). (6.4.5) V
We recall that the constitutive moduli C, βkl , λij kl , and kij are symmetric functions of x − x described by C(x − x) = C(x − x ), βkl (x − x) = βkl (x − x ) = βlk (x − x), λij kl (x − x) = λij kl (x − x ) = λj ikl (x − x) = λij lk (x − x), kij (x − x) = kij (x − x ) = kj i (x − x). (6.4.6) The field equations are obtained by substituting (6.4.5) into (6.4.1) and (6.4.4) and using ekl = 21 (uk,l + ul,k ). (6.4.7) This then gives ∂ (−βkl T + λij kl u i,j ) dv + ρ(fl − u¨ l ) = 0, ∂xk V ∂
˙ − (ρC T + T0 βkl u˙ k,l ) dv + kkl T,l dv + ρh = 0. ∂xk V V
(6.4.8)
We transform partial derivative of integrals in these equations by noting the identities of the type ∂ ∂
−βkl (x − x)T (x ) dv(x ) =
[βkl (x − x)]T (x ) dv(x ) ∂xk V ∂x V k ∂ ∂T (x )
= [β (x − x)T (x )] dv(x ) − β (x − x) dv(x ). kl kl
∂xk
V ∂xk V Upon using the Green–Gauss theorem in the first integral we obtain ∂
−βkl (x − x)T (x ) dv(x ) = βkl (x − x)T (x ) dak (x ) ∂xk V ∂V ∂T (x ) − βkl (x − x) dv(x ). (6.4.9) ∂xk
V
84
6 Nonlocal Linear Elasticity
Using this type of identity for other terms in (6.4.8), we obtain −
(6.4.10)
kkl T,l dak
(kkl T,lk − ρC T˙ − T0 βkl u˙ k,l ) dv + ρh = 0. +
(6.4.11)
V
−
(−βkl T + λij kl u i,j ) dak
+ (−βkl T,k + λij kl u i,j k ) dv + ρ(fl − u¨ l ) = 0,
∂V
∂V
V
These are the field equations of nonlocal, homogeneous thermoelastic solids for the determination of the displacement field uk (x, t) and the temperature field T (x, t). We observe that nonlocality also occurs over the surface of the body ∂V. A mixed boundary-initial value problem requires the solution of these field equations (with fl and h given), under the boundary and initial conditions. Boundary Conditions Let V denote a regular region of the Euclidean space occupied by the body whose boundary is ∂V. The interior of V is denoted by V, and the exterior normal to ∂V by n. Let S1 to S4 denote the subsets of ∂V such that S 1 ∪ S2 = S 3 ∪ S4 = ∂V,
S1 ∩ S2 = S3 ∩ S4 = 0,
(6.4.12)
The boundary conditions of these subsurfaces, at the time interval T + = [0, ∞), may be expressed as uk = uˆ k (x, t) T = Tˆ (x, t)
on S 1 × T + , on S 3 × T + ,
tkl nk = tˆl (x, t)
on S2 × T + ,
qk nk = q(x, ˆ t)
on S4 × T + , (6.4.13)
l and where quantities carrying a caret (ˆ) are prescribed. Here tˆl = tˆkl nˆ k + F . qˆ = qˆk nk + H Initial Conditions The initial conditions usually consisting of Cauchy data, are expressed by uk (x, 0) = u0k (x),
u˙ k (x, 0) = vk0 (x),
T (x, 0) = T 0 (x) in V,
(6.4.14)
wher quantities carrying a superscript (0) are prescribed throughout V. Clearly other possibilities exist.
6.4 Field Equations of Nonlocal Linear Elasticity
85
A. Isotropic Solids For homogeneous and isotropic solids, the constitutive equations (6.4.5) reduce to (6.1.20), namely
T (x ) β(|x − x|)
η= C(|x − x|) + uk,k (x ) dv(x ), T0 ρ0 V tkl = [−β(|x − x|)T (x ) + λ(|x − x|)ui,i (x )]δkl V + µ(|x − x|)[uk,l (x ) + ul,k (x )] dv(x ), k(|x − x|)T,k (x ) dv(x ). qk =
V
(6.4.15)
The field equations (6.4.10) and (6.4.11) then become −
∂ V
[−β(|x − x|)T + λ(|x − x|)u i,i ]δkl + µ(|x − x|)(u k,l + u l,k ) dak
−β(|x − x|)T,l + [λ(|x − x| + µ (|x − x|)]u k,lk +µ(|x − x|)u l,kk dv + ρ(fl − u¨ l ) = 0,
− k(|x − x|)T,k dak + [k(|x − x|)T,kk − ρC(|x − x|)T˙
+
V
∂V
(6.4.16)
V
− T0 β(|x − x|)u˙ k,k ] dv + ρh = 0.
(6.4.17)
If we further call for the attenuating neighborhood hypothesis and employ (6.1.23), the constitutive equations take the form η= tkl = qk =
V
V V
α(|x − x|) C η(x ) dv , α(|x − x|)σkl (x ) dv , α(|x − x|) C qk (x ) dv ,
(6.4.18)
and the field equations (6.4.16) and (6.4.17) reduce to
α(|x − x|)σkl,k (x ) dv + ρ(fl − u¨ l ) = 0, −S q + α(|x − x|)(C qk,k − ρT0 C η) ˙ dv = 0,
−S tl +
V
V
(6.4.19) (6.4.20)
where C η, σkl , and C q are given by (6.1.24). Here S tl is the surface tension and S q is the surface heat arising from elimination of the symmetry of the intermolecular
86
6 Nonlocal Linear Elasticity
attractions by the creation of the surface ∂V. They are given by α(|x − x|)σkl (x )nk (x ) da , S tl = ∂V α(|x − x|)T,k (x )nk (x ) da . S q = k0 ∂V
(6.4.21) (6.4.22)
We note that the kernel function α in these expressions will not be a function |x − x| but (x , x), unless the intermolecular attractions are taken into account from both inside and outside the body. These effects, however, are confined to a thin boundary layer of few atomic distances in the neighborhood of the surface ∂V.
B. Formulation by Means of Convolution Definition (Convolution). Let φ(x, t) and ψ(x, t) be in V × T + ,
{φ(x, t), ψ(x, t)} ∈ C 0,0
T + = [0, ∞),
(6.4.23)
then the function θ(x, t), defined by
t
θ(x, t) = φ ∗ ψ =
φ(x, t − τ )ψ(x, τ ) dτ,
(6.4.24)
0
is called the convolution of φ and ψ. Some elementary properties of the convolution can be deduced from its definitions: (a) Commutative property: φ ∗ ψ = ψ ∗ φ. (b) Associative property: φ ∗ (ψ ∗ ω) = (φ ∗ ψ) ∗ ω = φ ∗ ψ ∗ ω. (c) Distributive property: φ ∗ (ψ + ω) = φ ∗ ψ + φ ∗ ω. (d) Titchmarch’s theorem: φ ∗ ψ = 0 on V × T + implies that either φ = 0 or ψ = 0 on V × T + . We can show that
t
1∗φ =
φ dt, 0
˙ 0) − φ(x, 0). t ∗ φ¨ = φ − t φ(x,
(6.4.25)
Theorem. Let uk ∈ C 0,2 , tkl ∈ C 1,0 , and η ∈ C 0,1 , then uk , η, tkl , and qk satisfy the equations of motion and the initial conditions if and only if t ∗ tkl,k + Fl = ρul , −ρT0 η + 1 ∗ qk,k + R = 0,
(6.4.26) (6.4.27)
6.5 Uniqueness Theorem
87
where F = t ∗ ρf(x, t) + ρ[tv 0 (x) + u0 (x)], R = 1 ∗ ρh + ρT0 η(x, 0).
(6.4.28)
Proof . Equations (6.4.26) and (6.4.27) follow from (6.4.1) and (6.4.4). Conversely, differentiating twice (6.4.26) and once (6.4.27) with respect to t we obtain (6.4.1) and (6.4.4). The initial conditions on u and η are also included in the formulation. Theorem (Equivalence). The mixed boundary-initial value problems of nonlocal thermoelastic solids are equivalent to the system (6.4.26), (6.4.27), the constitutive equations (6.4.5), and the boundary conditions (6.4.13).
6.5 Uniqueness Theorem3 The uniqueness theorem of the linear theory of nonlocal elasticity, for the static case, was elaborated by Chirita [1976]. The dynamic case was considered by Altan [1984] and Cracium [1996]. The present proof differs from those given by these authors. The basic equations of the linear theory of nonlocal thermoelasticity for homogeneous solids are given by: Equations of Motion tkl,k + ρfl = ρ u¨ l ,
tkl = tlk .
(6.5.1)
The Energy Equation −ρT0 η˙ + qk,k + ρh = 0. Constitutive Equations 1 1
C(x − x)T (x ) + βkl (x − x)ekl (x ) dv , η= ρ V T0
tkl = −βkl (x − x)T (x ) + λij kl (x − x)ui,j (x ) dv(x ), V qk = kkl (x − x)T,l (x ) dv(x ), V
(6.5.2)
(6.5.3)
where C(x −x), βkl (x −x), λij kl (x −x), and kkl (x −x) are symmetric functions of x −x as described by (6.4.6). A mixed boundary-initial value problem is expressed by the boundary conditions (6.4.13) and by the initial conditions (6.4.14), namely: 3 Not published before.
88
6 Nonlocal Linear Elasticity
Boundary Conditions uk = uˆ k (x, t) T = Tˆ (x, t)
on S 1 × T + , on S 3 × T + ,
tkl nk = tˆl (x, t)
on S2 × T + ,
qk nk = q(x, ˆ t)
on S4 × T + . (6.5.4)
Initial Conditions uk (x, 0) = u0k (x),
u˙ k (x, 0) = vk0 (x),
T (x, 0) = T 0 (x) in V,
(6.5.5)
where V is the interior of the body and S1 to S4 are partial surfaces on the surface of the body ∂V: S 1 ∪ S2 = S 3 ∪ S4 = ∂V,
S1 ∩ S2 = S3 ∩ S4 = 0.
(6.5.6)
The following continuity requirements are assumed: uk (x, t) ∈ C 1,2 , {tkl (x, t), qk (x, t)} ∈ C 1,0 , T (x, t) ∈ C 1,0 in V × T + , {uˆ k (x, t), tˆkl (x, t), Tˆ (x, t), q(x, ˆ t)} ∈ C 0,0 {u0k (x), vk0 (x), T 0 (x)} ∈ C 0 ,
(6.5.7)
on ∂V × T + , (6.5.8)
where T + = [0, ∞) and C i,j denotes the continuous ith partial derivatives with respect to x and the continuous j th partial derivative with respect to time t. We now establish some results that are useful. We define 1 K(s, τ ) = 2 ρ u˙ k (s)u˙ k (τ ) dv, V ρC
1 U(s, τ ) = 2 T (s)T (τ ) + λij kl eij (s)ekl (τ ) dv dv, V V T0 ρh(τ ) ˙ )+ P (s, τ ) = ρf(s) · u(τ T (s) dv T0 V 1 ˙ ) + q(τ )T (s) da. + t(s) · u(τ (6.5.9) T0 ∂V We note that K(t, t) ≡ K(t) is the total kinetic energy, U(t, t) ≡ U(t) is the total strain energy, and P (t, t) ≡ P (t) is the power of the applied body and surface loads. Theorem 1. U(t) − K(t) =
1 2
t
[P (t + s, t − s) − P (t − s, t + s] ds
0
+ U(0, 2t) − K(0, 2t).
(6.5.10)
6.5 Uniqueness Theorem
Proof . We introduce the notation E(s, τ ) = [tkl (s)e˙kl (τ ) + ρT (s)η(τ ˙ )] dv. V
89
(6.5.11)
From (6.5.9) and (6.5.3) it can be verified that ˙ E(t, t) ≡ E(t) = U.
(6.5.12)
Using (6.5.11), we can show that E(t − s, t + s) − E(t + s, t − s) = 2
d U(t − s, t + s). ds
(6.5.13)
By means of the equations of motion (6.5.1), (6.5.2), and 2ekl = uk,l + ul,k , we evaluate 1 E(t − s, t + s) = tkl (t − s)u˙ l,k (t + s) + qk,k (t + s)T (t − s) T0 V ρ + h(t + s)T (t − s) dv, (6.5.14) T0 using the identity fg,l = (fg),l − gf,l , and the Green–Gauss theorem (6.5.14) is transformed to 1 E(t − s, t + s) = tk (t − s)u˙ k (t + s) + T (t − s)q(t + s) da T0 ∂V 1 − tkl,k (t − s)u˙ l (t + s) + T,k (t − s)qk (t + s) T 0 V ρ + T (t − s)h(t + s) dv. T0 Upon substituting tkl,k and qk from (6.5.3), this becomes ρ u¨ k (t − s)u˙ k (t + s) dv E(t − s, t + s) = P (t − s, t + s) − V 1 − kkl T,k (t − s)T,l (t + s) dv dv. (6.5.15) T0 V V By replacing s by −s, we obtain the expression of E(t + s, t − s). Substituting these two expressions into (6.5.13) we obtain 2
d [U(t −s, t +s)−K(t −s, t +s)] = P (t −s, t +s)−P (t +s, t −s). (6.5.16) ds
90
6 Nonlocal Linear Elasticity
Integration of this relation, from 0 to τ , gives 2U(t − τ, t + τ ) − 2K(t − τ, t + τ ) − 2U(t) + 2K(t) τ = [P (t − s, t + s) − P (t + s, t − s)] ds. (6.5.17) 0
Setting t = τ leads to the desired result (6.5.10). Lemma 1. The functionals U(t) and K(t) are given by 2U(t) = U(0) + K(0) + U(0, 2t) − K(0, 2t) t 1 [P (t + s, t − s) − P (t − s, t + s) + 2P (s, s)] ds +2 0 t 1 − ds kkl T,k (s)T,l (s) dv dv, (6.5.18) T0 0 V V 2K(t) = U(0) + K(0) − U(0, 2t) − K(0, 2t) t 1 −2 [P (t + s, t − s) − P (t − s, t + s) − 2P (s, s)] ds 0 t 1 − ds kkl T,k (s)T,l (s) dv dv, (6.5.19) T0 0 V V for all t ∈ T + [0, ∞). Proof . Recalling (6.5.12) and setting s = 0 in (6.5.15) we obtain 1 U˙ + K˙ = P (t) − kkl T,k T,l dv dv. T0 V V Integration gives t P (s, s) ds U + K = U(0) + K(0) + 0 t 1 − ds kkl T,k (s)T,l (s) dv dv. T0 0 V V
(6.5.20)
Using this equation and (6.5.10) we obtain (6.5.17) and (6.5.18), thus completing the proof. Theorem (Uniqueness). If ρ is strictly positive, kkl is positive semidefinite, and C is strictly positive (or negative), then the boundary-initial value problems of nonlocal linear thermoelasticity have at most one solution. Proof . Suppose that the contrary is valid, and two solutions u(α) , T (α) , α = 1, 2, exist. Let T = T (1) − T (2) . u = u(1) − u(2) ,
6.6 Power and Energy
91
Then clearly u and T satisfy (6.5.1) to (6.5.5), with f = h = uˆ = tˆ = Tˆ = qˆ = u0 = v0 = T 0 = 0. This means that we have homogeneous equations and boundary and initial conditions. With these, (6.5.19) reduces to V
ρ u˙ k u˙ k dv +
1 T0
t
ds 0
V
V
kkl T,k T,l dv dv = 0.
(6.5.21)
By the hypothesis of the theorem then
ds 0
u˙ = 0
t
V
V
in V × T + ,
kkl T,k T,l dv dv = 0,
t ∈ T +.
(6.5.22)
Since initially u vanishes we have u = 0.
(6.5.23)
In view of this and (6.5.22)2 , (6.5.18) gives
ρ CT T dv dv = 0. T V V 0
This implies that T = 0 in V × T + . Hence the proof of the theorem.
(6.5.24)
6.6 Power and Energy Definitions. The ordered set of functions S{uk , ekl , tkl , qk , T }, that satisfy the continuity requirements (6.5.7) and (6.5.8), is called an admissible thermoelastic state. S is considered to be a linear function space, i.e., S1 + S2 = {u1 + u2 , e1 + e2 , t1 + t2 , q1 + q2 , T 1 + T 2 }, αS = {αu, αe, αt, αq, αT }.
(6.6.1)
An admissible state may be restricted by imposing additional requirements. For example, if S meets the constitutive equations (6.5.3) and the strain displacement relations ekl = (uk,l + ul,k )/2, we call this kinematically admissible. If kinematically admissible states satisfy equations of motion (6.5.1) and (6.5.2) and the boundary and initial conditions (6.5.4) and (6.5.5) this is called the solution of the mixed problems.
92
6 Nonlocal Linear Elasticity
Theorem (Power and Energy). If S{uk , ekl , tkl , qk , T } is a solution of the nonlocal thermoelasticity, then4 h 1 tˆl vl0 da + ρ f · u˙ + T dv + qˆ Tˆ da T0 T0 ∂ V V ∂V = ρ u˙ · u¨ dv V CT T 1 + + λij kl u i,j u˙ k,l + kkl T,l T,k dv dv. (6.6.2) T0 T0 V V Proof . We multiply (6.5.1) by u˙ l and integrate over V: tkl,k u˙ l dv + ρfl u˙ l dv = ρ u¨ l u˙ l dv. V
V
V
(6.6.3)
Using the identity tkl,k u˙ l = (tkl u˙ l ),k − tkl u˙ l,k , and the Green–Gauss theorem, we express the first term in (6.6.3): tkl,k u˙ l dv = tkl e˙kl dv, tˆk vk0 da − V
∂V
V
(6.6.4)
where we also used (6.5.4) and (6.5.5). Carrying tkl from the constitutive equations, the second term on the right-hand side becomes tkl e˙kl dv = (βkl T u˙ k,l − λij kl u i,j u˙ k,l ) dv dv. (6.6.5) − V
V
V
But from the energy equations (6.5.2) and (6.5.3)1 , we have 1 1 βkl T u˙ k,l dv dv = − CT T˙ dv dv + qk,k T dv T0 V V T0 V V V 1 + ρhT dv. (6.6.6) T0 V With the use of the Green–Gauss theorem we have qk,k T dv = [(qk T ),k − qk T,k ] dv V V = qˆ Tˆ da − qk T,k dv. ∂V
V
Consequently (6.6.6) becomes 1
βkl T u˙ k,l dv dv = − (CT T˙ + kkl T,k T,l ) dv dv T0 V V V V 1 1 + ρhT dv + qˆ Tˆ da. (6.6.7) T0 V T0 ∂ V 4 For an isotropic body, see Altan [1990].
6.7 Reciprocal Theorem
93
Carrying this into (6.6.5), we have C ˙ 1 − tkl e˙kl dv = − T T + λij kl u i,j u˙ k,l + kkl T,k T,l dv dv T0 V V V T0 1 1 + ρhT dv + qˆ Tˆ da. (6.6.8) T0 V T0 ∂ V When we substitute this into (6.6.4) and then the result to (6.6.3) we obtain (6.6.2) which completes the proof.
6.7 Reciprocal Theorem The reciprocal theorem was considered for the isothermal case by Ie¸san [1977] and for the isotropic case by Altan [1990]. Here we present this theorem in the style of the reciprocal theorem of the local case (of Eringen [1998, Section 5.8]). Consider the two external systems L(α) = {f (α) , h(α) , tˆ(α) , qˆ (α) , u0(α) , v0(α) , η0(α) }, S (α) = {u(α) , T (α) , t(α) , q(α) , η(α) },
(6.7.1)
of which S (α) is the solution of the nonlocal thermoelasticity corresponding to L(α) . Lemma. Let
1 1 ∗ q (α) (τ ) ∗ T (β) (s) da T0 ∂V 1 (β) (β) (α) (α) + Fk (τ ) ∗ uk (s) + t ∗ 1 ∗ qk (τ )T,k (s) T0 V 1 (β) (α) − t ∗ R (α) ∗ T (β) − ρuk (τ ) ∗ uk (s) dv, T0 α, β = 1, 2, τ, s ∈ T + , (6.7.2)
Wαβ (τ, s) = t ∗
(α)
(β)
tl (τ ) ∗ ul (s) −
where Fk and R are given by (6.4.28) and (∗) denotes the convolution product (see Section 6.4). We will prove that Wαβ (τ, s) = Wβα (s, τ ).
(6.7.3)
Proof . By means of the Green–Gauss theorem, we convert surface integrals to volume integrals (β) (α) (α) (α) (α) (β) Wαβ (τ, s) = [(t ∗ tkl,k + Fl − ρul ) ∗ ul ] dv + t ∗ tkl ul,k V V 1 1 (α) (β) (α) (β) dv. (6.7.4) − t ∗ 1 ∗ qk,k ∗ T − t ∗R ∗T T T0
94
6 Nonlocal Linear Elasticity
The first integral vanishes, on account of the equation of motion (6.4.26). Replacing (α) 1 + qk,k by its expressions (6.4.27) we obtain (β) (α) Wαβ (τ, s) = t ∗ (tkl ∗ ekl − ρη(α) ∗ T (β) ) dv. (6.7.5) V
Substituting for
(α) tkl
and
η(α)
from the constitutive equation (6.4.5) we have (β)
(α) (β) −βkl T (α) ekl + λij kl eij ekl Wαβ (τ, s) = t ∗ V V ρ
(α)
(α) (β) (β) dv. (6.7.6) − βkl ekl ∗ T − CT ∗T T0
Hence the proof of the lemma. Expression (6.7.2) may be decomposed into Wαβ (τ, s) = Rαβ (τ, s) + Sαβ (τ, s), where
(β) (α) tl (τ ) ∗ ul (s) Rαβ (τ, s) = Rβα (s, τ ) = t ∗ ∂V 1 (α) (β) − 1 ∗ q (τ ) ∗ T (s) da T0 1 (β) (α) (α) (β) + Fk (τ ) ∗ uk (s) − t ∗ R (τ ) ∗ T (s) dv, T0 V Sαβ (τ, s) = Sβα (s, τ ) 1 (β) (β) (α) (α) = 1 ∗ t ∗ qk (τ ) ∗ T,k (s) − ρuk (τ ) ∗ uk (s) dv. V T0
(6.7.7)
(6.7.8)
(6.7.9)
The symmetry of Sαβ may be seen by carrying the expression qk from (6.5.3). Theorem (Reciprocal). If the S (α) , α = 1, 2, is a solution of the linear nonlocal thermoelasticity systems, then 1 (1) (2) (1) (2) tl ∗ ul − 1 ∗ q ∗ T da t ∗ T0 ∂V 1 (1) (2) (1) (2) + Fk ∗ uk − t ∗ R ∗ T dv T0 V 1 (2) (1) =t∗ tl ∗ ul − 1 ∗ q (2) ∗ T (1) da T 0 ∂V 1 (2) (1) (2) (1) + Fk ∗ uk − t ∗ R ∗ T dv. (6.7.10) T0 V The proof follows from (6.7.8) by setting τ = s = t.
6.8 Variational Principles
95
6.8 Variational Principles5 A variational principle for the isothermal case was given by Ie¸san [1977], and for the isotropic solids by Altan [1990]. Here we give the most general case of the homogeneous and anisotropic nonlocal thermoelastic case, in a treatment similar to the local case presented in Eringen [1998]. Theorem. Let K be the set of all admissible states and let S ∈ K. Define the functional t (S) on K, for each t ∈ T + , by
1
λklmn t ∗ emn ekl dv dv + 2 ρuk ∗ uk − t ∗ tkl ∗ ekl V V V 1 − (t ∗ tkl,k + Fl ) ∗ ul dv − kkl 1 ∗ t ∗ gl ∗ gk dv dv 2T0 V V ρ
− t ∗ βkl ekl ∗ T dv dv − Ct ∗ T ∗ T dv dv 2T 0 V V V V 1 + t ∗ [1 ∗ qk ∗ gk + (R + 1 ∗ qk,k ) ∗ T ] dv T0 V + t ∗ tk ∗ uˆ k da + t ∗ (tk − tˆk ) ∗ uk da S1 S2 1 1 ˆ − t ∗ 1 ∗ q ∗ T da + t ∗ 1 ∗ (q − q) ˆ ∗ T da, (6.8.1) T0 S3 T0 S4
(t) (S) =
1 2
where S1 ∪ S2 = S3 ∪ S4 = ∂V, S1 ∩ S2 = S3 ∩ S4 = 0, and q = qk nk , tk = tlk nl , R = 1 ∗ ρh + ρT0 η(x, 0).
Fk = t ∗ ρfk + ρ(tvk0 + u0k ), (6.8.2)
Then t (S) is stationary, i.e., for every S + S ∈ K: δt (S) ≡
d = 0 on K, t (S + S) d =0
t ∈ T+
(6.8.3)
if and only if S is a solution of the mixed problem. Proof . Let S{u, T , e, t, q, g} ∈ K be an arbitrary variation in the state S. The variation of (6.8.1) reads 5 Not published before.
96
6 Nonlocal Linear Elasticity
δt (S) =
V
V
λklmn t ∗ emn ∗ ekl dv dv +
V
[ρuk ∗ uk − t ∗ (tkl ∗ ekl
− t kl ∗ ekl ) − (t ∗ tkl,k + Fl ) ∗ ul − t ∗ t kl,k ∗ ul ] dv 1 − kkl 1 ∗ t ∗ gl ∗ g k dv dv T0 V V
− t ∗ βkl (ekl ∗ T + ekl ∗ T ) dv dv V V ρ 1
− Ct ∗ T ∗ T dv dv + t ∗ [1 ∗ (q k ∗ gk + qk ∗ g k ) T0 V V T0 V + (R + 1 ∗ qk,k ) ∗ T + 1 ∗ q k,k ∗ T ] dv + t ∗ t k ∗ uˆ k da + t ∗ [(tk − tˆk ) ∗ uk + t k ∗ uk ] da S1 S2 1 − t ∗ 1 ∗ q ∗ Tˆ da T0 S3 1 + [t ∗ 1 ∗ [(q − q) ˆ ∗ T + q ∗ T ] da = 0. T0 S4 By means of the Green–Gauss theorem we have t ∗ ul ∗ t kl,k dv = t ∗ [(ul ∗ t kl ),k − ul,k ∗ t kl ] dv V V t ∗ ul ∗ t l da − ul,k ∗ t kl dv. = ∂V
V
(6.8.4)
(6.8.5)
Using these, and collecting the coefficients of u, T , . . . we arrive at
(λklmn emn − βkl T ) dv − tkl ∗ ekl dv δt (S) = t ∗ V V − (t ∗ tkl,k + Fl − ρul ) ∗ ul dv V
−t∗ ekl − 21 (uk,l + ul,k ) ∗ t kl dv V 1 1 + ρCT
∗t ∗ −kkl gl dv + qk ∗ g k dv + t ∗ T0 T0 V V V V 1
+ −T0 βkl ekl dv + (R + 1 ∗ qk,k ∗ T dv + t ∗ 1 ∗ (gk T0 V V − T,k ) ∗ q k dv + t ∗ (uˆ k − uk ) ∗ t k da + t ∗ (tk − tˆk ) ∗ uk da S1 S 2 t t + ∗1∗ (T − Tˆ ) ∗ q da + ∗1∗ (q − q) ˆ ∗ T da. (6.8.6) T0 T 0 S3 S4
6.8 Variational Principles
97
In view of (6.4.5), (6.4.7), (6.5.4), (6.5.5), (6.4.26) and (6.4.27), it is clear that if S is a solution of the mixed problem, then δt (S) = 0. This proves the sufficiency condition. The proof of necessity requires a subtler approach, namely: we must stipulate that the members of S can be selected completely arbitrarily and independently from one another. Then δt (S) requires that coefficients of the members of S must vanish separately. This completes the proof. This theorem constitutes the most general variational principles for the mixed boundary-initial value problems in that the admissible states meet none of the relations satisfied by the field variables, except some smoothness and symmetry regulations. By restricting the set of admissible states to a smaller set one can construct other variational principles of less complexity. Definition. An admissible state S is called kinematically admissible, if its meets the strain-displacement relations (6.4.7), the constitutive relations (6.4.5), and the boundary conditions (6.4.13) on uk and T . Theorem. Let U be the set of all kinematically admissible fields and let u, T ∈ U and for each t ∈ T + define a functional (U ) by (U ) = 21 {t ∗ [tkl ∗ ekl + ρ(η − η0 ) ∗ T ] + ρuk ∗ uk − 2Fk ∗ uk } dv V 1 1 + t ∗ −ρ(η − η0 ) ∗ T + 1 ∗ ρh ∗ T − 1 ∗ qk ∗ T,k dv T0 2T0 V 1 − t ∗ tˆk ∗ uk da + t ∗ 1 ∗ T ∗ qˆ da, (6.8.7) T0 S4 S2 where η0 = η(x, 0). Then δ(U ) = 0
on U,
t ∈ T +,
(6.8.8)
if and only if U is a field corresponding to the solution of the mixed problem. Proof . Because of the fact that the constitutive equations are satisfied, the variation of gives δ(U ) = − (t ∗ tkl,k + Fl − ρul ) ∗ ul dv V 1 +t ∗ −ρ(η − η0 ) + 1 ∗ (ρh + qk,k ) ∗ T dv T0 V 1 + (tk − tˆk ) ∗ uk da + t ∗ 1 ∗ T ∗ (qˆ − q) da. (6.8.9) T0 S2 S4 From (6.4.26), (6.4.27), and the boundary conditions, it is clear that if a kinematically admissible field is a solution of the mixed problem, then (6.8.8) is fulfilled.
98
6 Nonlocal Linear Elasticity
Conversely, for arbitrary and independent variations of u and T , the equations of motion and boundary conditions are satisfied leading to (6.8.8). Thus, (6.8.8) constitutes both the necessary and sufficient conditions for the solution of the mixed problem.
6.9 Approximate Models A. Slowly Varying Fields If the fields are varying slowly over a characteristic distance d, we can replace the integral operators with differential operators. This simply means that we can expand the Fourier transforms of the constitutive moduli C, λij kl , βij , and kij into power series of the wave number ki , e.g., √ λij kl (k) = λij klτ1 ···τr (ik1 )(ik2 ) · · · (ikr ), i = −1, (6.9.1) with λij klτ1 ···τr being real constants, and the stress constitutive equations, such as λij kl (x − x)eij (x ) dv(x ), tkl = V
gives a couple stress theory involving r derivatives of eij .
B. Matching a Dispersion Curve with Atomic Models A more useful case involves matching the Fourier transforms of constitutive moduli (such as λij kl ) in the wave number space with the dispersion curves based on the atomic models. For example, according to the Born–Kármán lattice model 2 ωj2 (k)/ω0j = (2κ/πk) sin2 (πk/2κ),
(6.9.2)
where 2 ω0j = k 2 cj2 ,
c12 = (λ0 + 2µ0 )/ρ,
c22 = µ0 /ρ.
(6.9.3)
Here ω01 and ω02 are, respectively, the classical circular frequencies of the irrotational and equivoluminal waves. Here κ is the upper limit of k (the boundary of the Brillouin zone), e.g., for the one-dimensional lattice κ = π/a, where a is the lattice parameter. Thus, we see the introduction of an internal characteristic length a. For an infinite isothermal solid with fl = 0, taking the Fourier transform of (6.4.19) and substituting the Fourier transform of σkl , given by (6.1.24), we obtain ωj2 (k)/cj2 = k 2 α(k),
j = 1, 2,
(6.9.4)
where α is the Fourier transform of α(|x − x|) and c1 and c2 are, respectively, the phase velocities of the irrotational and equivoluminal waves in classical elasticity. A polynomial form is most convenient for the approximation of (6.9.4): 1/α = 1 + βi (k/κ)2 + δj (k/κ)4 .
(6.9.5)
6.9 Approximate Models
99
At k = 0 this gives the classical frequency, and at k = κ it will satisfy the condition dω/dk = 0, with δj = 1. The latter condition implies that, at the end of the Brillouin zone, the phase velocity vanishes (no wave progagation)—a well-known result in lattice dynamics. Hence we have α = [1 + βj (k/κ)2 + (k/κ)4 ]−1 , k ω/ωjd = [1 + βj (k/κ)2 + (k/κ)4 ]−1/2 , κ
(6.9.6) (6.9.7)
where ωjd = κcj is the Debye frequency. The parameter βj is related to the ratio of the boundary frequency ωj (κ) and to the Debye frequency ωjd : ωj (κ)/ωjd = (2 + βj )1/2 .
(6.9.8)
−2 < βj < ∞.
(6.9.9)
From this it follows that In Figure 6.9.1, we display the dispersion curves based on (6.9.7), along with the one based on the Born–Kármán model (see also Kunin [1983, p. 39]). For engineering purposes, perhaps it may be more practical to leave βj and δj free for better curve-fitting at low wave numbers relevant to the macroscopic problems. If we set α = (1 + 2 k 2 + γ 4 k 4 )−1 , (6.9.10) then the nonlocal stress constitutive equation (6.1.26)2 , for the infinite media, gives (1 + 2 k 2 + γ 4 k 4 )t kl = σ kl ,
(6.9.11)
where t kl and σ kl are the Fourier transforms of tkl and σkl . The inverse Fourier transform of (6.9.11) is (1 − 2 ∇ 2 + γ 4 ∇ 4 )tkl = σkl .
(6.9.12) βj = –1
0
ωj
Born-Kármán βj = –1
ωjd
5
k/x
Figure 6.9.1. Dispersion curves.
100
6 Nonlocal Linear Elasticity
In terms of (6.1.26)2 , this implies that (1 − 2 ∇ 2 + γ 4 ∇ 4 )α(|x − x|) = δ(|x − x|).
(6.9.13)
If we take the divergence of (6.9.12) and use (6.4.1), we obtain σkl,k + (1 − 2 ∇ 2 + γ 4 ∇ 4 )(ρfl − ρ u¨ l ) = 0,
(6.9.14)
or using (6.1.24)2 with β0 = 0 and (6.4.7), we have the field equations (λ + µ)uk,lk + µul,kk + (1 − 2 ∇ 2 + γ 4 ∇ 4 )(ρfl − ρ u¨ l ) = 0.
(6.9.15)
These equations replace the Navier equations of classical elasticity, that are singularly perturbed. We note that, for static problems and vanishing body forces, (6.9.14) reduces to the equations of equilibrium in classical elasticity and (6.9.15) reduces the Navier equations. However, since the real stress is not σkl but tkl , in order to determine the stress fields, we must invert (6.9.11). Alternatively, when the Hookean stress σkl is known, we can use (6.9.12) to determine the stress field. An expression of the Laplacian of the stress tensor tkl , in curvilinear coordinates, is given in the Appendix. Thus, we can integrate (6.9.12), or a simpler equation (1 − 2 ∇ 2 )t = σ (6.9.16) to obtain the stress tensor t in the curvilinear coordinate (cf. Section 6.18).
C. Linear Chains Consider a one-dimensional linear chain of atoms lying along an x-axis. Equally spaced atoms are attached to each other by springs of spring constant K (Figure 6.9.2). The differential equation of motion for the nth atom is M u¨ n = K(un+1 + un−1 − 2un ),
(6.9.17)
where K is related to the potential energy U (R). If U (R0 ) is the potential energy between two atoms at their equilibrium position, then the spring constant K is given by 2 d U K= . dR 2 R=R0 M
Un –1
K
Un
Figure 6.9.2. Linear chain.
Un +1
6.9 Approximate Models
101
ωa/c1
2
ka
Figure 6.9.3. Dispersion curve in one Brillouin zone. Equation (6.9.17) may be solved by introducing un = u exp(inka − iωt),
(6.9.18)
leading to the dispersion relations 4 ω2 = 2 sin2 2 a c1
ka 2
,
−
π π ≤k≤ , a a
(6.9.19)
√ where c1 = a K/M. Within one Brillouin zone (6.9.19) is displayed in Figure 6.9.3. Accordingly, the nonlocal kernel α is given by (Born–Kármán model): 4 2 ka α(k) = 2 2 sin . (6.9.20) k a 2 The inverse Fourier transform of this gives |x − x| 1 1− , a a
α(|x − x|) = 0,
|x − x| ≤ 1, a |x − x| > 1. a
(6.9.21)
This function is displayed in Figure 6.9.4. Here we found a triangular kernel with a finite support.6 6 See also Eringen [1972a], [1974c].
102
6 Nonlocal Linear Elasticity αa
x/a
Figure 6.9.4. Nonlocal elastic modulus (one-dimensional chain). For more complicated linear chains, (6.6.20) is replaced by7 α(k) =
N n2 sin2 (nka/2) 1 Kn , (λ + 2µ)a (nka/2)2
(6.9.22)
n=1
where N is the number of atoms in the cohesion zone and Kn are the force constants. The inversion of this gives N |x − x| n 1 1 − K , |x − x| ≤ na, n 2 a na α(|x − x|) = λ + 2µ n=1 0, |x − x| > na. (6.9.23) For isotropic solids this model may be generalized to the two- and three-dimensional case by
n A 1 − |x − x| , n = 2, 3, |x − x| ≤ a, an α(|x − x|) = (6.9.24)
0 |x − x| > a. cf. Artan [1996]. The constant A is obtained by the normalization of α(|x − x|), i.e., V
α(|x|) dv = 1.
This gives A = 2/πa 2 A = 3/2πa 3 7 Nowinski [1990].
in two-dimensions, in three-dimensions.
(6.9.25)
6.9 Approximate Models
103
D. Other Kernels Clearly many other kernels can be created by matching lattice dynamical or experimental dispersion curves with the nonlocal results. In fact, continuous kernels that are of a Dirac-delta sequence offer simpler calculations. In the early days, one such kernel, used by Eringen in his calculations, was 2 k (6.9.26) α(|x − x|) = α0 exp − 2 |x − x|2 , where α0 and k are constants, being the constant internal characteristic length. Expression (6.9.26) is normalized by α(|x|) dv = 1, (6.9.27) V
giving
α0 = π −n/2 (k/)n
(6.9.28)
for n dimensions (n = 1, 2, 3). Clearly (6.9.26) is a delta sequence since → 0 gives a Dirac-delta distribution. The constant k can be fixed by a suitable curve fitting with the lattice dynamical results. For example, for k = 1.65, the dispersion curve obtained from (6.9.26) for plane waves in infinite elastic media is indistinguishable from that of the onedimensional Born–Kármán model. As we shall see when we come to the discussion of crack and dislocation problems, the brittle fracture criteria is another way of determining the constant k. This method is valid for static deformations.
E. α(|x − x|) is a Green Function of a Linear Differential Operator By matching the dispersion curves of plane waves with those of lattice dynamics we obtained the differential equation (6.9.13). This equation is in the form Lα(|x − x|) = δ(|x − x|),
(6.9.29)
where L is the differential operator 1 − 2 ∇ 2 + γ 4 ∇ 4 . However, other differential operators may also be admissible. If such an operator can be found representing the state of the body faithfully, then applying L to (6.1.26)2 , we obtain Ltkl = σkl .
(6.9.30)
In particular, if L is a differential operator with constant coefficients, then (Ltkl ),k = Ltkl,k and (6.4.1) gives (Eringen [1983]): σkl,k + L(ρfl − ρ u¨ l ) = 0.
(6.9.31)
104
6 Nonlocal Linear Elasticity
In this case, we have partial differential equations to solve, instead of integropartial differential equations. If ρf −ρ u¨ = 0, as in the static case, then the classical equation of equilibrium is to be satisfied σkl,k = 0.
(6.9.32)
This then leads to the Navier equations of classical elasticity for the displacement field (λ + µ)uk,lk + µul,kk = 0. (6.9.33) Once the solution for u is obtained then one can determine the stress field by solving the differential equations (6.9.30). As an extension of the differential operator, we consider a parabolic differential operator (diffusion-type), subject to the initial conditions, e.g., ∂tkl ∂ tkl = 0, tkl (x, 0) = σkl (x). (6.9.34) −P ∂τ ∂xr This is a Cauchy problem for the stress tensor with, initially, the stress tensor being equal to the local stress tensor in rectangular coordinates. The nonlocal stress tensor tkl is considered to be a function of x and a parameter τ . This parameter represents the internal characteristic length . Consequently, for the vanishing internal characteristic length, the stress tensor is taken to be the Hookean (classical) stress tensor. The Green function α(x, τ ) for the Cauchy problem (6.9.34) is the solution of ∂α ∂ α = 0, α(x, 0) = δ(x). (6.9.35) −P ∂τ ∂xr The solution of the Cauchy problem (6.9.34) is then given by tkl = α(x, τ ) ∗ σkl (x),
(6.9.36)
where the asterisk (∗) denotes the convolution. Alternatively, applying the Laplace transform to (6.9.35) we have ∂ st kl − P t kl = σkl (x). (6.9.37) ∂xr When the solution of this equation is obtained for tkl under the appropriate boundary conditions, by obtaining the inverse Laplace transform of t kl , we obtain the nonlocal stress tensor in terms of the local stress tensor. Thus, either way, we have a solution for tkl given by the inversion of (6.9.30), i.e., −1
tkl = L σkl .
(6.9.38)
We demonstrate this procedure by a simple example in one dimension 1 α(x, τ ) = √ exp(−x 2 /4τ ) 2 πτ
(6.9.39)
6.9 Approximate Models
105
is the Green functions of the heat equation, i.e., the solution of the initial value problem ∂α ∂ 2α α(x, 0) = δ(x). (6.9.40) − 2 = 0, ∂t ∂x The solution of the Cauchy problem for tkl is given by (6.9.36), i.e., ∞ 1 (x − ξ )2 α(ξ ) dξ. (6.9.41) exp − tkl = α ∗ σkl = √ 4τ 2 πτ −∞ Similarly, 1 sin(νx) , 0 < ν < ∞, (6.9.42) π x is the delta sequence in one dimension arising from the differential equation α(x, ν) =
∂ ∂α (xα) − ν = 0, α(x, 0) = δ(x). (6.9.43) ∂x ∂ν Here we have a variable coefficient differential operator. The solution for the Green function is (6.9.42). This function is illustrated in Figure 6.9.5. For the two-dimensional case, the Green function of the operator L = 1 − 2 ∇ 2 leads to
α(|x|) = (2π2 )−1 K0 (|x|/),
(6.9.44) 0 < < ∞.
(6.9.45)
where K0 (z) is the Bessel function of imaginary argument. This is also a Dirac-delta sequence. Thus, we have many possibilities. The question arises, what is rational for the selection of the most appropriate kernel? In quantum mechanics this selection is made through the wave function which satisfies the Schrödinger equation. Here our only guidance seems to be with the minimum number of parameters (such as ) to obtain a close fit with the lattice dynamical and/or experimental dispersion curves. As we shall see through various solutions, in fact, even with one parameter matching, excellent agreements are obtained with the predictions of experiments and lattice dynamics.
Figure 6.9.5. α(x, ν) =
1 sin(νx) π x .
106
6 Nonlocal Linear Elasticity
Figure 6.10.1. Screw dislocation.
6.10 Screw Dislocation8 A screw dislocation is envisioned as a constant discontinuity in the antiplane displacement component, at a point x2 = 0. This is obtained by cutting a solid along the plane x2 = 0, x1 ≥ 0 and introducing a constant displacement discontinuity u3 = b, where b is called the Burger’s vector (Figure 6.10.1). For the case of antiplane strain u1 = u2 = 0 and u3 = w(x1 , x2 ), the equation of equilibrium tkl,k = 0 (6.10.1) is satisfied if we take t13 = φ,2 ,
t23 = −φ,1 .
(6.10.2)
Equations (6.9.30), with the kernel (6.9.44), take the form (1 − 2 ∇ 2 )φ,2 = σ13 ,
(1 − 2 ∇ 2 )φ,1 = −σ23 .
(6.10.3)
σ23 = µu3,2 ,
(6.10.4)
Hooke’s law reads σ13 = µu3,1 ,
which must satisfy the compatibility condition σ13,2 = σ23,1 .
(6.10.5)
(1 − 2 ∇ 2 )∇ 2 φ = 0.
(6.10.6)
Using (6.10.3) this gives An appropriate solution of (6.10.6), which makes the stress vanish as r = (x12 + x22 )1/2 → ∞, is φ = φ0 + C1 ln r + C2 K0 (r/ l), 8 Eringen [1977b], see also [1983a], [1987a], [1987b], [1990a].
(6.10.7)
6.10 Screw Dislocation
107
where K0 (z) is the Bessel function of the imaginary argument and (r, θ) are the plane polar coordinates x1 = r cos θ,
x2 = r sin θ.
(6.10.8)
In these coordinates we have tzr = t31 cos θ + t32 sin θ, tzθ = −t31 sin θ + t32 cos θ,
(6.10.9)
and
1 ∂φ ∂φ , tzθ = − . (6.10.10) r ∂θ ∂r The jump discontinuity u3 (2π) − u3 (0) = −b gives C1 = −b/2π. At the eye of the dislocation r = 0, tzθ vanishes if C2 = −µb/2π. Thus, we have the solution of the problem tzr =
µb φ = C0 − [ln(r/ l) + K0 (r/ l)], 2π r µb tzθ = 1 − K1 (r/ l) , tzr = 0. 2πr l The strain energy per unit length is given by R U µb2 1 t23 (x1 , 0)b dx1 = =2 [ln(R/r0 ) L 4π r0 + K0 (R/ l) − K0 (r0 / l)].
(6.10.11) (6.10.12)
(6.10.13)
From (6.10.12) and (6.10.13) we see that neither the stress nor the strain energy display singularities at the eye of the dislocation r = r0 = 0. As expected, for large R, the strain energy depends on the size of the solid. In Figure 6.10.2, we give a plot of the nondimensional stress T = (2π/b)tzθ /µ = ρ −1 [1 − ρK1 (ρ)],
ρ ≡ r/ l.
(6.10.14)
The maximum shear stress occurs at ρ = 1.1: tzθ max /µ ∼ = 0.3993
b . 2πl
(6.10.15)
By use of this we can determine the cohesive strength tc of a perfect crystal by 0.39a where a is the lattice equating tzθ max to tc . Based on phonon dispersion, √ parameter. For fcc materials and b/a = 1/ 2, (6.10.15) gives tc /µ = 0.12.
(6.10.16)
This result compares well with the value 0.11 for Al(fcc); W , α − Fe(bcc), and 0.12 for Nacl and MgO (cf. Lawn and Wilshaw [1975, p. 160]).
108
6 Nonlocal Linear Elasticity
Figure 6.10.2. Nondimensional shear stress in screw dislocation. After Eringen [1983].
If the crystal is ductile near the eye of the dislocation at tc > taθ max , new dislocations will be produced. Thus, the region 0 ≤ ρ < ρc is a dislocation free zone, i.e., dislocations will emerge at ρ = ρc and will pile up in a region ρ ≥ ρc . This prediction of the theory is supported by observations made on electron microscopy (cf. Ohr and Chang [1982]). According to the theory, the rupture or dislocation initiation does not begin at the eye (ρ = 0) of the dislocation but at ρ = ρc > 0. This is against our previous understanding of dislocation and fracture mechanism but is supported by experiment.
6.10 Screw Dislocation
109
A. Distribution of Dislocations Beside the unimportant constant C0 (which can be dropped) φ is the Green’s function for the differential equation (6.10.6). For an arbitrary distribution of the Burger’s vector b(ξξ ) over an area S the stress field can be calculated by superposition ∂G(|x − ξ |) b(ξξ ) da(ξξ ), t13 = µ ∂x2 S ∂G(|x − ξ |) b(ξ ) da(ξξ ), (6.10.17) t23 = −µ ∂x1 S where G(|x − ξ |) = −
1 [ln(|x − ξ |/ l) + K0 (|x − ξ |/ l)]. 2π
(6.10.18)
For a line distribution the stress field is given by
∂G(|x − ξ |) b(ξξ ) ds(ξξ ), ∂x2 C ∂G(|x − ξ |) = −µ b(ξξ ) ds(ξξ ). ∂x1 C
t13 = µ t23
(6.10.19)
In polar coordinates these read
1 ∂G b(ξξ ) ds(ξξ ), C r ∂θ ∂G = −µ b(ξξ ) ds(ξξ ). C ∂r
tzr = µ tzθ
(6.10.20)
Using these, we can calculate the stress fields when the dislocation density b(ξξ ) is given. As an example, for a uniform distribution of screw dislocations along a line segment, (6.10.19) gives
x+1 T2 ≡ t32 /td = ln x−1
+ K0 (γ |x + 1|) − K0 (γ |x − 1|),
(6.10.21)
where td = µb/2π = µb0 N/2πL,
x = x1 /L,
γ = L/ l.
(6.10.22)
Here b0 is the atomic Burger vector and N is the number of dislocations over an interval of half-length L. The stress field (6.10.21) is continuous everywhere along the x-axis (Figure 6.10.3).
110
6 Nonlocal Linear Elasticity
Figure 6.10.3. Shear stress distribution for uniformly distributed screws in a line segment. After Eringen [1990a].
B. Screw Dislocation in a Half-Plane9 The stress distribution arising from a screw dislocation in a half-plane x3 = 0, located at x1 = L, x2 = 0, with the constant Burger’s vector b, can be calculated by means of a superposition. We superpose the stress field of a dislocation located at x1 = −L, x2 = 0 with the Burger’s vector −b to that located at x1 = L, x2 = 0 (Figure 6.10.4): µb 1 1 1 1 tzθ = − + K1 (r2 / l) − K1 (r1 / l) , (6.10.23) 2π r1 r2 l l where r1 = (r 2 − 2rL cos θ + L2 )1/2 ,
r2 = (r 2 + 2rL cos θ + L2 )1/2 .
(6.10.24)
We observe that at the boundary x1 = 0, r1 = r2 , t13 vanishes. Hence (6.10.23) is the correct solution of this problem. Suppose we slice the x1 -axis from x1 = 0 to the point of application of the screw x1 = L. A displacement of the upper part, with respect to the lower part, of 9 Eringen [1990a].
6.10 Screw Dislocation
111
Figure 6.10.4. Screw dislocation in a half-plane. this cut by an amount of the Burger’s vector requires an energy per unit length L U 2L µb2 2L t23 (x1 , 0)b dx1 = − = 21 ln + K0 − C , (6.10.25) L 4π 0 where C = 0.577215 . . . is the Euler constant. The force required per unit length is given by F 2L ∂ µb2 2L U = =− 1− K1 . (6.10.26) L ∂L L 4πL As → 0, this is identical to the classical result Fc µb2 =− . L 4πL
(6.10.27)
According to the classical solution, the force on the dislocation becomes very large with decreasing L, so that the dislocation will move to the free boundary x1 = 0. However, the nonlocal solution (6.10.26) shows that, as L → 0, the force vanishes, so that while dislocation will tend to move toward the boundary it will never get there. Near the free boundary the friction force will balance the force of dislocation. This implies that between the free surface x1 = 0 and the stopping point of dislocation there will be a dislocation free zone. In fact, this prediction was observed by Ohr et [1982] for perfect crystals.
112
6 Nonlocal Linear Elasticity
Figure 6.11.1. Edge dislocation.
Screw dislocation in nonlocal hexagonal elastic crystals was treated by Eringen and Balta [1978].
6.11 Edge Dislocation10 A straight-edge dislocation may be envisioned by slicing a circular cylinder along a radial plane (0 < r ≤ R, θ = 0, z) and shifting the lower surface outward in the radial plane with respect to the upper face (Figure 6.11.1). The problem is two dimensional, so that to determine the classical stress fields σij we need to solve the biharmonic equation ∇ 4 ψ = 0 which in polar coordinates reads 2 1 ∂ ∂ 1 ∂2 r + 2 2 ψ = 0, r ∂r ∂r r ∂θ
(6.11.1)
where ψ(r, θ) is the stress function. An appropriate solution, relevant to the edge dislocation, is given by
ψ = A r ln r − 21 βr 3 sin θ. 10 Eringen [1977a].
(6.11.2)
6.11 Edge Dislocation
113
The Hookean stress field is calculated by σrr σθ θ σrθ
1 1 1 − βr sin θ, = 2 ψ,θ θ + ψ,r = A r r r 1 − 3βr sin θ, = ψ,rr = A r 1 ∂ 1 ψ,θ = −A − βr cos θ, =− r ∂r r
where A and β are constants. The nonlocal stress field is given by
(k) (k ) t () = α(|x − x|)σ (l ) (x )δ l l δ kk dv , V
(6.11.3)
(6.11.4)
where δ l l and δ kk are the cosine directors of the cylindrical coordinates at x with respect to those at x: x1 = r cos θ, x1 = r cos θ ,
x2 = r sin θ,
x3 = z,
x2 = r sin θ ,
x3 = z .
(6.11.5)
Hence trr tθ θ
α(|x − x|) 21 (σrr + σθ θ ) ± (σrr − σθ θ ) cos 2(θ − θ) V
∓ σrθ sin 2(θ − θ) dv
= α(|x − x|) 21 (σrr − σθ θ ) sin 2(θ − θ) V
+ σrθ cos 2(θ − θ) dv , (6.11.6)
=
trθ
where |x − x| = [r 2 + r 2 − 2rr cos(θ − θ) + (z − z)2 ]1/2 , dv = r dr dθ dz .
(6.11.7)
For the kernel α(|x − x|) we select α(|x − x|) = π −3/2 (k/ l)3 (6.11.8) 2 2 2
2 · exp{−(k/ l) [r + r − 2rr cos(θ − θ) + (z − z) ]}. This is the same kernel given by (6.9.26), expressed in polar coordinates. Substituting (6.11.3) and (6.11.8) into (6.11.6) we perform some tedious integrations in the order z , θ , and r , using the tables given by Gradshteyn and Ryzhik
114
6 Nonlocal Linear Elasticity
[1965], to obtain A {1 − βr 2 − (l/kr)2 [1 − exp(−k 2 r 2 / l 2 )]} sin θ, r A = {−1 − 3βr 2 + [2 + (l/kr)2 ][1 − exp(−k 2 r 2 / l 2 )]} sin θ, r A (6.11.9) = − {1 − βr 2 − (l/kr)2 [1 − exp(−k 2 r 2 / l 2 )]} cos θ. r
trr = tθ θ trθ
The displacement fields ur and uθ are identical to the classical forms that may be obtained by integrating the stress–strains relations of two-dimensional elasticity err = = eθ θ = = erθ =
1 ∂ur = [(1 − ν)σrr − νσθ θ ] ∂r 2µ A [1 − 2ν − β(1 − 4ν)r 2 ] sin θ, 2µr ur 1 1 ∂uθ + = [−νσrr + (1 − ν)σθ θ ] r ∂θ r 2µ A [1 − 2ν − β(3 − 4ν)r 2 ] sin θ, 2µr ∂uθ uθ σrθ A 1 1 ∂ur + − = =− (1 − βr 2 ) cos θ, (6.11.10) 2 r ∂θ ∂r r 2µ 2µr
where ν is the Poisson ratio and µ is the shear modulus. Integration (6.11.10) gives ur =
A
(1 − 2ν) ln r sin θ − 2(1 − ν)θ cos θ 2µ
− 21 β(1 − 4ν)r 2 sin θ] + B cos θ + C sin θ, A
uθ = (1 − 2ν) ln r cos θ + 2(1 − ν)θ sin θ + cos θ 2µ + 21 β(5 − 4ν)r 2 cos θ − Dr − B sin θ + C cos θ,
(6.11.11)
where B, C, and D represent the rigid body displacement. We are now ready to determine the constants A and β from the boundary conditions trr = trθ = 0 at r = R, ur (r, 2π) − ur (r, 0) = b.
(6.11.12)
This gives
2 β0 ≡ βl 2 /k 2 = 1 − P −2 (1 − e−P ) P −2 , µb kR kr A=− , P ≡ , ρ≡ . 2π(1 − ν) l l
(6.11.13)
6.11 Edge Dislocation
115
The nonlocal stress field is obtained to be µbk 2 [ρ −1 − β0 ρ − ρ −3 (1 − e−ρ )] sin θ, 2π(1 − ν)l µbk 2 [−ρ −1 − 3β0 ρ + ρ −1 (2 + ρ −2 )(1 − e−ρ )] sin θ, =− 2π(1 − ν)l µbk 2 [ρ −1 − β0 ρ − ρ −3 (1 − e−ρ )] cos θ. = (6.11.14) 2π(1 − ν)l
trr = − tθ θ trθ
The elastic strain energy U is calculated by 1 U = 2 (trr err + tθ θ eθ θ + 2trθ erθ ) dv. V
(6.11.15)
Substituting from (6.11.10) and (6.11.14), and integrating over the regions 0 ≤ r ≤ R, 0 ≤ θ ≤ 2π, 0 ≤ z ≤ L, we obtain U =
−2 µb2 L 2 P (1 − e−P ) − 1 − 2(1 − ν)[Ei(−P 2 ) − C − ln P 2 ] 2 16π(1 − ν) −P 2 2 4 + β0 (3 − 4ν)(1 − e − 2P + β0 P ) , (6.11.16)
where C is the Euler constant and Ei(x) is the exponential integral function x t e C = 0.5772 . . . , Ei(x) = dt, x < 0. (6.11.17) −∞ t In classical elasticity the stress field for the edge (Volterra) dislocation of a hollow cylinder with inner radius r0 and outer radius R is given by (cf. Lardner [1974, p. 77]: r02 1 r − 2 − 3 sin θ, trr = A r R r r02 1 3r tθ θ = A − 2 − 3 sin θ, r r R r02 1 r trθ = −A (6.11.18) − 2 − 3 cos θ. r R r For the full cylinder r0 = 0, and along the axis of the cylinder, the stress field becomes infinite as 1/r. Thus, a core region 0 < r ≤ r0 had to be excluded from the calculations. The nonlocal result does not contain this singularity. In fact, we observe that: (i) the stress field is not singular at r = 0 but depends on the internal characteristic length l = 0;
116
6 Nonlocal Linear Elasticity
(ii) when l → 0 the solution (6.11.14) reverts to the classical solution (6.11.18); (iii) the stored energy U has no singularity for P = 0 unless either the cylinder has infinite radius or l = 0; and (iv) the maximum shear stress occurs at ρ = ρm , the root of exp(ρ 2 ) =
3 + 2ρ 2 . 3 − ρ 2 − β0 ρ 4
(6.11.19)
For a cylinder of infinite radius β0 = 0, and the root of (6.11.19) is given by ρm 1.46595, aside ρ = 0. At this, trθ max is obtained to be trθ max ≡ τc =
µbk µbk ρm 0.2009 . π(1 − ν)l 3 + 2ρm π(1 − ν)l
(6.11.20)
If the nonlocal effects at n atomic distance r = na are assumed to diminish to 1% of its value at r = 0, then k = 2.146/n and we obtain τc = 0.4311
µb . π(1 − ν)an
(6.11.21)
√ For a single atomic dislocation of face centered metals b = a/ 6, and we obtain τc /µ = 0.08/n,
(6.11.22)
where we took ν = 0.3. For n = 2 this gives τc /µ = 0.04 and for n = 3, τc /µ = 0.027. These values are in the accepted range known in solid state physics. For example, for aluminum and cooper (at 20 ◦ C) the tabulated values of τc /µ = 0.039 (Kelly [1966]) for n = 2.05, the present theory gives exactly τc /µ = 0.039.
6.12 Screw Dislocation in Nonlocal Hexagonal Elastic Solids11 Here we present another solution of the screw dislocation in order to demonstrate the situation for an anisotropic solid, namely a nonlocal elastic solid with hexagonal symmetry. For such a solid the nonlocal kernel α(x − x) has a form different than an isotropic solid. A useful one is α(x − x) = π −3/2 k12 k2 l −3 exp[−(k1 / l)2 (xβ − xβ )(xβ − xβ ) − (k2 / l)2 (x2 − x2 )2 ],
β = 1, 3.
(6.12.1)
Note that the degree of attenuation in the x2 -direction is different than in the x1 and x2 -directions. 11 Eringen and Balta [1978]. Edge dislocation in nonlocal hexagonal elastic crystals was discussed by Eringen and Balta [1979a].
6.12 Dislocation in Nonlocal Hexagonal Elastic Solids
117
In hexagonal solids, Hooke’s law is in the form:
σ11 0 0 c11 c12 c13 0 e11 σ22 c12 c22 c12 0 0 0 e22 σ33 c13 c12 c11 0 0 0 e33 . σ23 = 0 0 0 c44 0 0 e23 σ31 0 e31 0 0 0 c55 0 0 0 0 0 0 c44 σ12 e12
(6.12.2)
A pure screw dislocation in the z-direction, in the basal plane of a hexagonal crystal, is possible (Figure 6.12.1). Referred to rectangular coordinates, the nonzero components of the displacement and the Hookean stress components are given by
Figure 6.12.1. Screw dislocation in hexagonal crystals.
118
6 Nonlocal Linear Elasticity
(cf. Hirth and Lothe [1968, p. 426]): √ b tan−1 (x2 /x1 B), 2π Ab x2 =− , 2 2π Bx1 + x22 ABb x1 = , 2π Bx12 + x22
u3 = σ13 σ23
(6.12.3)
where b = (0, 0, b) is the Burger’s vector and A and B are constants related to the elastic moduli cij by A = [c44 (c11 − c13 )/2]1/2 ,
B = 2c44 /(c11 − c13 ).
(6.12.4)
The elastic energy per unit length of a cylinder, with inner and outer radii r0 and R, is given by Uc Ab2 R . (6.12.5) = ln L 4π r0 Hence we notice the stress and energy singularities as r0 → 0. This is a troublesome state, well known in classical elasticity. In cylindrical coordinates the stress field is given by σθ z = −σ13 sin θ + σ23 cos θ =
Ab 1 , 2π r
A(B − 1)b 1 tan θ . (6.12.6) 2π r B + tan2 θ The expression of the nonlocal stress is obtained, similar to (6.11.4), or by coordinate transformation, as trz = α(x − x)[−σθ z (x ) sin(θ − θ) + σrz (x ) cos(θ − θ)] dv(x ), V tθ z = α(x − x)[σθ z (x ) cos(θ − θ) + σrz (x ) sin(θ − θ)] dv(x ), (6.12.7) σrz =
V
with α(x − x) given by α(x − x) = −π −3/2 k12 k2 l −3 exp[−(k1 / l)2 (z − z)2 ] · exp[−(k1 / l)2 r 2 cos2 θ − (k2 / l)2 r 2 sin2 θ] · exp[−(k1 / l)2 (r 2 cos2 θ − 2rr cos θ cos θ ) − (k2 / l)2 (r 2 sin2 θ − 2rr sin θ sin θ )].
(6.12.8)
Since α is an even function of θ − θ, the integrals (6.12.7) take the form A(B − 1)b ∞ ∞ 2π tan θ cos(θ − θ)
trz = dz dr α(x − x) dθ , 2π B + tan2 θ
−∞ 0 0 Ab ∞ ∞ 2π tθ z = α(x − x) cos(θ − θ) dz dr 2π −∞ 0 0 tan θ
+(B − 1) sin(θ − θ) dθ . (6.12.9) B + tan2 θ
6.12 Dislocation in Nonlocal Hexagonal Elastic Solids
119
Integrations over r and z are carried out to obtain Akκb 2π sin θ cos θ
(B − 1) cos(θ − θ)f (ρ, θ , θ) dθ , trz = 4π 3/2 l 0 1 + (B − 1) cos2 θ
Akκb 2π cos(θ − θ) tθ z = 4π 3/2 l 0 sin θ cos θ
+ (B − 1) sin(θ − θ) f (ρ, θ , θ) dθ , (6.12.10) 1 + (B − 1) cos2 θ
where ρ = kr/ l,
k = k1 ,
κ = k2 /k1 ,
f (ρ, θ, θ ) (cos θ cos θ + κ 2 sin θ sin θ )2 2 2 2 = exp −ρ 1 + (κ − 1) sin θ − 1 + (κ 2 − 1) sin2 θ
cos θ cos θ + κ 2 sin θ sin θ
× 1 + erf ρ [1 + (κ 2 − 1) sin2 θ ]1/2 (6.12.11) · [1 + (κ 2 − 1) sin θ ]−1/2 . The displacement field is given by ur = uθ = 0,
uz =
b tan−1 (B −1/2 tan θ), 2π
(6.12.12)
so that the nonzero component of the strain tensor is eθ z =
B 1/2 b [1 + (B − 1) cos2 θ]−1 . 4πr
The total strain energy per unit length is calculated by B 1/2 b 2π R U/L = [1 + (B − 1) cos2 θ]−1 tθ z (r, θ) dr dθ. 4π 0 0
(6.12.13)
(6.12.14)
The nondimensional shear stress τθ z = tθ z /t0 ,
t0 ≡
Akb , 2πl
(6.12.15)
is displayed in Figure 6.12.2, for various hexagonal crystals. κ has been selected to be c22 /c11 , with the consideration that the attenuation in a given direction is probably proportional to the elastic modulus in that direction. The elastic constant used (taken from Hearmon [1969]) are shown in Table 6.12.1. Also listed in this table are κ = c22 /c11 , the maximum value of τθ z and its location ρ = ρm . It is clear that the maximum value of the shear stress and its location is greatly affected by the anisotropy. In particular, for Cd and Zn, the maximum shears are nearly
120
6 Nonlocal Linear Elasticity
Figure 6.12.2. Nondimensional shear stress τθ z versus ρ. After Eringen and Balta [1978]. Table 6.12.1. Maximum shear stress. c11 Material Zn Mg Cd Apatite Ice
16.5 5.93 11.4 16.7 1.34
Elastic Constants c12 c13 c22 × 1011 dyn/cm2 5.0 3.1 6.2 2.14 2.57 6.15 4.0 3.94 5.08 6.6 1.31 14.0 0.53 0.65 1.45
c44 3.96 1.64 2.0 6.63 0.313
κ= (c22 /c11 ) 0.376 1.037 0.446 0.838 1.082
τθ z = (tθ z /t0 ) 0.3370 0.6555 0.3911 0.5871 0.6824
ρm = (krm /a) 2.65 1.08 2.25 1.29 1.03
one-half of that of the isotropic solids. In Figures 6.12.3 and 6.12.4, the angular dependence of τθ z and τrz are displayed for Mg. Finally, in Figure 6.12.5, the ratio of the shear stress tθ z to that of the isotropic solids is displayed for various materials. These curves may be used to give estimates of other hexagonal crystals with different κ.
6.12 Dislocation in Nonlocal Hexagonal Elastic Solids
121
Table 6.12.2. tθ z /c44 . Material Zn Mg Cd Apatite Ice
1.00 0.0698 0.1056 0.0850 0.1007 0.1140
k 1.25 0.0872 0.1320 0.1062 0.1258 0.1425
1.50 0.1049 0.1584 0.1275 0.1510 0.1710
Figure 6.12.3. Nondimensional shear stress τθ z = tθ z /t0 versus θ for Mg. After Eringen and Balta [1978].
Figure 6.12.4. Nondimensional shear stress τrz = trz /t0 versus θ. After Eringen and Balta [1978]. Unlike the results given in classical theory, the shear stresses do not display any singularity but acquire maxima. Equating the maxima to the cohesive shear stress we obtain the condition that produces a dislocation of the single atomic distance.
122
6 Nonlocal Linear Elasticity
Figure 6.12.5. Nondimensional shear stress τθ z to shear stress for isotropic bodies. After Eringen and Balta [1978]. Table 6.12.2 lists the ratio tθ z /c44 for various k, b/a = 1. The value 1.50 makes the dispersion curve for shear waves, obtained theoretically by using (6.12.1), nearly coincident with those obtained from experiments by Joynson [1954]. It appears that the theoretical shear stress calculated is about twice the value, based on the lattice dynamics (Kelly [1966, p. 19]) for Zn. Considering the inaccuracies involved in estimating the interatomic force laws, it seems that the present prediction is in the right range. With the smaller adjustments of k and κ, it is possible to lower this prediction. The total energy given by (6.12.14) may be put into the form U = 2Ab2 LU0 ,
(6.12.16)
where U0 depends on κ, B, and P = kR/ l. For various materials U0 is calculated and listed in Table 6.12.3. The case of isotropic materials agrees very well with the result given by Eringen [1977b] and with that given in Section 6.10. Of course, U0 grows with the radius R becoming infinite at R = ∞, as expected.
6.13 Continuous Distribution of Dislocations
123
Table 6.12.3. Coefficient U0 of total energy; U0 = U/2Ab2 L. Material Isotropic, Eringen [1977b] Isotropic (Present: B = κ = 1) Zn Mg Cd Apatite Ice
1 0.01585
2 0.03914
P = kR/a 3 5 0.05520 0.07552
7 0.08891
10 0.10301
0.01586
0.03916
0.05521
0.07551
0.08890
0.10300
0.00610 0.01633 0.00714 0.01366 0.01688
0.01831 0.03987 0.02107 0.03548 0.04069
0.03027 0.05593 0.03412 0.05139 0.05676
0.04895 0.07624 0.05341 0.07167 0.07707
0.06210 0.08962 0.06660 0.08505 0.09045
0.07617 0.10380 0.08069 0.09923 0.10463
6.13 Continuous Distribution of Dislocations12 A small neighborhood n(x) of x, in a distorted body V, may be relaxed to a small neighborhood N(X) of the image point X of x, in an undistorted (or natural) configuration V , by releasing the constraints exerted by the rest of the body. We can express a line element dx at x ∈ n(x) in terms of its image dX ∈ N(X) by dx = A dX,
(6.13.1)
where A(X) is called the elastic distortion. We assume that A(X) is continuously differentiable and possesses a unique inverse −1
dX = A dx.
(6.13.2)
Consider a smooth surface S in V bounded by a closed curve C. The Burger’s vector b of the dislocations piercing through S is defined by * * −1 b= dX = an da, (6.13.3) A dx = C
C
S
where n is the unit normal to S. The positive sense of C is counterclockwise, when sighting along n. Here a is called the true dislocation density −1
a = curl A
or
−1
aj k = kmn A j n,m .
(6.13.4)
−1 A kl
(6.13.5)
For small distortions we can take Akl = δkl + αkl ,
δkl − αkl ,
so that aj k = kmn αj m,n . 12 Eringen [1984].
(6.13.6)
124
6 Nonlocal Linear Elasticity
From this it follows that aj k,k = 0.
(6.13.7)
For the linear strain tensors and spins wkl we have ekl = 21 (αkl + αlk ),
(6.13.8)
wkl =
(6.13.9)
1 2 (αkl
− αlk ).
The incompatibility of the strain tensor is expressed as ij k lmn ein,j m = ηkl ,
(6.13.10)
where ηkl is called the incompatibility tensor. This is given by ηkl = 21 (kmn anl,m + lmn ank,m ).
(6.13.11)
So far these results are well known in the classical theory of dislocation (cf. Teodosiu [1982]). For nonlocal, homogeneous, and isotropic elastic solids the stress–strain relations are given by (6.1.20)2 . Under mild assumptions (with γ = 0), regarding the kernel α(|x − x|), by (6.9.12) we have (1 − 2 ∇ 2 )tkl = λerr δkl + 2µekl .
(6.13.12)
From this equation we solve for ekl : ekl =
1 ν (1 − 2 ∇ 2 ) tkl − trr δkl , 2µ 1+ν
(6.13.13)
where ν = λ/2(λ + µ) is the Poisson ratio. Substituting (6.13.13) into (6.13.10), we obtain 1 2 2 2 2 (trr,kl − ∇ trr δkl ) = 2µηkl . (6.13.14) (1 − ∇ ) ∇ tkl + 1+ν These equations must be solved to determine the stress field tkl which is subject to the equilibrium condition tkl,k = 0. (6.13.15) Following the classical approach (cf. Kröner [1954]), we take tkl /2µ = ∇ 2 χkl +
1 (χrr,kl − ∇ 2 χrr δkl ), 1−ν
(6.13.16)
where χkl = χlk is a stress function subject to χkl,l = 0.
(6.13.17)
Substituting (6.13.16) into (6.13.14) we obtain (1 − 2 ∇ 2 )∇ 4 χkl = ηkl .
(6.13.18)
6.13 Continuous Distribution of Dislocations
125
Thus, if the dislocation density function akl is given through (6.13.11) we can calculate the incompatibility tensor ηkl . The solution of (6.13.18) will then give χkl . The stress field follows from (6.13.16). As l → 0, (6.13.18) reduces to the well-known classical equation of the local theory. When l = 0, (6.13.18) is perturbed singularly. In order to obtain the solution of (6.13.18), we introduce the Green’s tensor Gklmn (x, ξ ) which must satisfy (1 − l 2 ∇ 2 )∇ 4 Gklmn = δ(x − ξ )δkl δmn ,
(6.13.19)
when Gklmn is determined, then the solution of (6.13.18) is given by χkl = Gklmn (x, ξ )ηmn (ξξ ) dv(ξξ ). V
(6.13.20)
We now determine the Green’s function for a solid of infinite extent. For the infinite space we seek the solution of (6.13.19) that depends on |x − ξ | only, i.e., (1 − l 2 ∇ 2 )∇ 4 G = δ(x − ξ ).
(6.13.21)
The operators 1 − l 2 ∇ 2 and ∇ 4 commute, so that we may replace (6.13.21) by (1 − l 2 ∇ 2 G) = H,
∇ 4 H = δ(x − ξ ).
(6.13.22)
For the infinite space, H is given by H = −|x − ξ |/8π.
(6.13.23)
In spherical coordinates using the operator d d ∇ 2 = r −2 r2 , dr dr the solution of (6.13.21) is obtained to be |x − ξ | l2 exp(−|x − ξ |/ l) − , 4π|x − ξ | 8π |x − ξ | , l = 0, G(|x − ξ |) = − 8π G(|x − ξ |) =
l = 0,
where we have determined a constant to render tkk regular at x = ξ . The solution of (6.13.18) for an infinite medium is given by χkl = G(|x − ξ |)ηkl (ξξ ) dξξ , V
(6.13.24)
(6.13.25)
which satisfies (6.13.17) on account of (6.13.7) and (6.13.11). Upon substituting from (6.13.11), (6.13.25) may be expressed as ∂G ∂G χkl (x) = 21 ij k aj l (ξξ ) dv(ξξ ) + 21 ij l aj k (ξξ ) dv(ξξ ), (6.13.26) ∂xi ∂xi V V
126
6 Nonlocal Linear Elasticity
where we used the Green–Gauss theorem and set a surface term at infinity equal to zero. Equation (6.13.26), in the case of a line distribution of dislocations along a closed curve C, takes the form * * ∂G ∂G χkl = 21 ij k bj dsl + 21 lij bj dsk , (6.13.27) ∂x ∂x i i C C where bj is the Burger’s vector per unit length of C and dsl is the element of arc. The stress fields arising from a line distribution of dislocations are obtained by substituting (6.13.27) into (6.13.16): * 1 tkl /2µ = 2 rij bj ∇ 2 G,i (δrk dsl + δrl dsk ) 2 2 + (G,kli − ∇ G,i δkl ) dsr . (6.13.28) 1−ν This is identical to the Peach–Koehler formula (cf. Hirth and Lothe [1968], Teodosiu [1982]) with the modification that here G is the nonlocal Green’s function (6.13.24) with l = 0. The most interesting feature of (6.13.28) is that it does not exhibit unbounded stress fields and energy at any point.
A. Plane Strain In the case of plane strain, we introduce the Airy’s stress function (x1 , x2 ) by t11 = ,22 ,
t22 = ,11 ,
t12 = −,12 .
(6.13.29)
In this case (6.13.18) is replaced by (1 − l 2 ∇ 2 )∇ 4 = 2µη,
(6.13.30)
η = η33 = a23,1 − a13,2 , a23 = α21,2 − α22,1 , a13 = α11,2 − α12,1 .
(6.13.32)
where η is given by (6.13.31)
and depends on x1 and x2 only. For a two-dimensional infinite plane the Green’s function can be found similarly using the decomposition (6.13.22), with ∇ 2 and H given by 1 d d 1 ∇2 = r , H =− ln |x − ξ |. (6.13.33) r dr dr 2π Hence we obtain (x − ξ ) · (x − ξ ) 1 K0 (|x − ξ |/ l) − ln(|x − ξ |/ l), = 0, 2π 8πl 2 (x − ξ ) · (x − ξ ) ln(|x − ξ |), = 0, (6.13.34) G(|x − ξ |) = − 8π G(|x − ξ |) =
6.13 Continuous Distribution of Dislocations
where K0 (z) is the modified Bessel’s function. The Airy’s stress function is then found to be ∂G ∂G a13 (ξξ ) da(ξξ ), a23 (ξξ ) − (x) = 2µ ∂x2 S ∂x1
127
(6.13.35)
where we used the Green–Gauss theorem and disregarded a line integral at infinity. For a line distribution in the (x3 = 0)-plane, (6.13.35) is replaced by ∂G ∂G (x) = −2µ (6.13.36) b2 (ξξ ) dξ1 + b1 (ξξ ) dξ2 . ∂x2 C ∂x1 The stress field is calculated by using (6.13.29): t11 = −2µ (G,122 b2 dξ1 + G,222 b1 dξ2 ), C t22 = −2µ (G,111 b2 dξ1 + G,211 b1 dξ2 ), C t12 = 2µ (G,112 b2 dξ1 + G,212 b1 dξ2 ), C
(6.13.37)
where the indices after the comma denote partial derivatives, with respect to xk , e.g., ∂ 3G G,122 = ,... . ∂x1 ∂x22
B. Antiplane Strain In the case of antiplane strain the equations of equilibrium are satisfied by introducing ∂φ ∂φ t13 = , t23 = − . (6.13.38) ∂x2 ∂x1 In this case (6.13.30) is replaced by (1 − l 2 ∇ 2 )∇ 2 φ = µa33 ,
(6.13.39)
a33 = α31,2 − α32,1 .
(6.13.40)
where In this case the Green’s function is found to be 1 [ln(|x − ξ |/ l) + K0 (|x − ξ |/ l)], 2π 1 G(|x − ξ |) = − ln(|x − ξ |), l = 0. 2π G(|x − ξ |) = −
The stress function φ is given by φ(x) = µ
l = 0, (6.13.41)
S
G(|x − ξ |)a33 (ξξ ) da.
(6.13.42)
128
6 Nonlocal Linear Elasticity
For the stress tensor we obtain
∂G b(ξ ) dξ1 dξ2 , S ∂x2 ∂G = −µ b(ξ ) dξ1 dξ2 . ∂x 1 S
t13 = µ t23
(6.13.43)
For a line distribution of dislocation on the (x3 = 0)-plane the stress field reads ∂G t13 = µ b(ξξ ) ds, C ∂x2 ∂G t23 = −µ b(ξξ ) ds. (6.13.44) ∂x 1 C In polar coordinates we have
1 ∂G b(ξξ ) ds, C r ∂θ ∂G = −µ b(ξξ ) ds. C ∂r
tzr = µ tzθ
(6.13.45)
With these formulas developed we can calculate the stress field for any type of distributions of dislocations.
C. Stress Fields for Some Special Distributions of Dislocations Here we consider some special distributions of dislocations and give the resulting stress fields. (i) Edge Dislocation Along a Line Segment Along a line segment −L < x1 < L, x2 = 0, the edge dislocation with the Burger’s vector (b1 = const., b2 = 0), the stress field follows from (6.13.37) by noting that G,2 = ∂G/∂x2 = −∂G/∂ξ2 , is t11 = 2µb1 [G,22 (ρ1 ) − G,22 (ρ2 )], t22 = 2µb1 [G,11 (ρ1 ) − G,22 (ρ2 )], t12 = −2µb1 [G,12 (ρ1 ) − G,12 (ρ2 )],
(6.13.46)
where ρ1 = [(x1 − L)2 + x22 ]1/2 / l,
ρ2 = [(x1 + L)2 + x22 ]1/2 / l,
and the Green’s function G is given by (6.13.34).
(6.13.47)
6.13 Continuous Distribution of Dislocations
129
(ii) Screw Dislocations Along a Line Segment For the uniformly distributed screw dislocations along a line segment −L < x1 < L, x2 = 0, through (6.13.43) we find that t23 = µb[G(ρ1 ) − G(ρ2 )],
(6.13.48)
where G is given by (6.13.41) and ρ1 and ρ2 by (6.13.47). If there are N dislocations over a distance L, with the atomic Burger’s vector b0 , then for the macroscopic Burger’s vector b we have b = b0 N/2L.
(6.13.49)
The shear stress (6.10.48) may be expressed in a nondimensional form T2 = t23 /td = ln
|x + 1| + K0 (γ |x + 1|) − K0 (γ |x − 1|), |x − 1|
(6.13.50)
where
µb µb0 N x1 L = , x= , γ = . 2π 2πL L This result is identical to (6.10.21) given in Section 6.10. In the case of a single screw, we take td =
b(ξξ ) = b0 δ(ξξ )
(6.13.51)
(6.13.52)
in (6.10.44) and obtain µb0 ∂G =− ∂x2 2π ∂G µb0 = −µb0 = ∂x1 2π
t13 = µb0 t23
x2 r x1 r
r 1 − Kl (r/ l) , l r 1 − Kl (r/ l) , l
(6.13.53)
where r = (x12 + x22 )1/2 . This result is also identical to that given in Section 6.10, as expected. From (6.13.53) we obtain Tθ (ρ) = (2πl/µb0 )tzθ = ρ = r/ l.
1 [1 − ρK1 (ρ)], ρ (6.13.54)
Based on the results and discussions given before, we now state a fracture criterion: Fracture Criterion. Fracture occurs when the maximum shear stress reaches the value of the cohesive stress that holds atomic bonds together. With this criterion we see that the maximum stress hypothesis, practiced for macroscopic fracture, is restored for the atomic phenomena as well. In the case of the line distribution of screws the nondimensional stress T2 , given by (6.13.50), has been displayed previously in Figure 6.10.3. Here we observe that
130
6 Nonlocal Linear Elasticity
Table 6.13.1. Maximum shear stress and its location for a uniform distribution of screw dislocations along a straight-line segment. γ = x= T2 max
1 1.446 0.7478
1.5 1.197 1.0501
2 1.103 1.3008
3 1.039 1.6851
5 1.000 2.3026
10 1.000 2.9957
the maximum shear stress is located outside the segment, not x1 = ±L, x2 = 0 (see Table 6.13.1). Contrary to the classical elasticity solution, there is no singularity at x1 = ±L, x2 = 0. The behavior of T2 is governed basically by the first term in (6.13.50) except near x = ±1. At x = 1 we have µB µb0 N ln γ = , 2πl γ 2πh B ≡ b0 N, h ≡ lγ / ln γ .
t23 =
(6.13.55)
Equation (6.13.55) may be interpreted in terms of the atomic layers of distance h by one macroscopic dislocation of the Burger’s vector B. The ratio of the cohesive stress tcl , for the line distribution to that of a single screw tc , is given by tcl N ln γ = . tc 0.3993 γ
(6.13.56)
This gives the shear stress reduction, due to the presence of 2N dislocations, uniformily distributed along the line segment of length 2L. Since tcl ≤ tc the maximum number of dislocations is obtained as Nmax = 0.3993
γ . ln γ
(6.13.57)
When the distribution is nonuniform this number is modified. (iii) Uniform Distribution of Screw Dislocations Along a Circle We consider uniformly distributed screw dislocations along a circle of radius R. In polar coordinates, we have x1 = r cos θ, x2 = r sin θ, ξ1 = R cos φ, ξ2 = R sin φ, 2 2 |x − ξ | = [r + R − 2rR cos(φ − θ)]1/2 .
(6.13.58)
The Green’s function is given by G(|x − ξ |) = −
1 [ln(|x − ξ |/ l) + K0 (|x − ξ |/ l)]. 2π
(6.13.59)
6.13 Continuous Distribution of Dislocations
131
In order to calculate the stress fields tzr and tzθ we need to evaluate two integrals 2π +θ ln{l −1 [r 2 + R 2 − 2rR cos(φ − θ)]1/2 } dφ, (6.13.60) I1 =
θ 2π +θ
I2 =
K0 {l −1 [r 2 + R 2 − 2rR cos(φ − θ)]1/2 } dφ.
(6.13.61)
θ
To evaluate (6.13.60) we write ln{l −1 [r 2 + R 2 − 2rR cos(φ − θ)]1/2 } = ln[|r + R|/ l] + ln[1 − α0 cos2 (ψ/2)]1/2 , where α0 = 4rR/(r + R)2 ,
φ − θ = ψ.
The second term involving cos2 (ψ/2) can be integrated by writing x = cos(ψ/2) and consulting Gradshteyn and Ryzhik [1965, p. 562]: 2π ln(r/ l), r > R, (6.13.62) I1 = 2π ln(R/ l), r < R. By using the same reference [1965, p. 741], we evaluate I2 : 2πI0 (R/ l)K0 (r/ l), r > R, I2 = 2πI0 (r/ l)K0 (R/ l), r < R.
(6.13.63)
Consequently, I = 0
=−
2π
G(|x − ξ |) ds
ln(r/ l) + I0 (R/ l)K0 (r/ l), ln(R/ l) + I0 (r/ l)K0 (R/ l),
r > R, r < R,
(6.13.64)
where I0 (z) and K0 (z) are the Bessel’s functions. The stress field is given by µbR ∂I = 0, r ∂θ ∂I µb(R/ l)[(l/r) − I0 (R/ l)K1 (r/ l)], = = µbR µb(R/ l)I1 (r/ l)K0 (R/ l), ∂r
tzr = tzθ
In the special case when R → 0 and 2πRb = b0 we obtain r r µb0 1 − K1 , tzθ = 2πr l l
r > R, (6.13.65) r < R.
(6.13.66)
which is identical to our previous result (6.13.54) for a screw dislocation with the Burger’s vector b0 . For the uniform distribution of screws along a circle the stress field given by (6.13.65) may be expressed in the nondimensional form 1 − κI0 (κ)K1 (κρ), ρ > 1, (6.13.67) T = tzθ /µb = ρ κK0 (κ)I1 (κρ), ρ < 1,
132
6 Nonlocal Linear Elasticity
Figure 6.13.1. Shear stress (circular distribution). After Eringen [1984]. where ρ = r/R and κ = R/ l. This is displayed in Figure 6.13.1. For κ ≥ 50 the maxima of T occurs near ρ = 1, 0.324 ≤ Tmax ≤ 1. Clearly, by means of the nonlocal Peach–Koehler formula (6.13.28), one can evaluate stress fields for the distribution of dislocations on any curve, once the Green’s function G is determined. In fact, Povstenko [1995] gave the solution for the circular dislocation loops. Screw dislocation in a nonlocal bimedium was discussed by Gao [1990]. In all cases, nonphysical singularities do not appear.
6.14 Nonlocal Stress Field at the Griffith Crack An elastic plate with a line crack, located at −L < x < L, y = 0 and subject to a uniform tension tyy = t0 at infinity, is known as the Griffith crack (Figure 6.14.1). The classical elasticity solution of this problem leads to infinite stresses at the tips of the line crack. Consequently, no fracture criterion, based on the maximum stress hypothesis, could be given. In fact, Griffith proposed that fracture will occur when the applied stress reaches a critical value given by t02 L = Kγ ,
(6.14.1)
where K is a material constant and γ is the surface energy. In previous sections we have shown that in nonlocal theory, by equating the maximum stress to the cohesive stress that hold atomic bonds together, it is possible to introduce a natural fracture criterion. Also, we have found that the maximum nonlocal stress predicted by the nonlocal theory occurs slightly away from the crack tip. According to a lattice
6.14 Nonlocal Stress Field at the Griffith Crack
133
Figure 6.14.1. Griffith crack subject to uniform tension. model, Elliott [1947], and with computer simulations, Gohar [1979], this result is also confirmed. The nonlocal elasticity solutions for the Griffith crack was first given by Eringen and Kim [1974] and Eringen et al. [1977]. This problem was also treated in a more general way by Ari and Eringen [1983]. Here we follow the latter works. Equations of equilibrium follow from (6.4.19): L α(|x − x|)σkl,k (x ) dx dy − α(|x − x|)σ2l (x , 0) dx = 0. (6.14.2) −L
R
The region R covers the entire plane z = 0, excluding the crack line. When an incision is made in the undeformed body, the body will in general deform under the attractions of long-range interatomic forces. Moreover, it will become inhomogeneous in the neighborhood of the crack line because of the lack of attractions eliminated from the crack surface. Thus, the kernel α will fail to be a function of |x − x| in a thin boundary layer around the crack. Here we disregard these small changes and consider the body to be in its natural state. The stress field is given by α(|x − x|)σkl (x ) dx dy , (6.14.3) tkl = R
where σkl is the Hookean stress σkl = λerr δkl + 2µekl ,
(6.14.4)
ekl = 21 (uk,l + ul,k ).
(6.14.5)
and ekl is the strain tensor
134
6 Nonlocal Linear Elasticity
For the nonlocal kernel α we have found several choices in Section 6.9. For a two-dimensional case an appropriate kernel was given by (6.9.45), i.e., α(|x − x|) = (2πl 2 )−1 K0 (|x − x|/ l).
(6.14.6)
According to (6.9.12) this kernel with γ = 0 relates tkl to σkl by (1 − l 2 ∇ 2 )tkl = σkl .
(6.14.7)
The boundary conditions at the crack line x2 = 0 require that tyx = 0, y = 0 ∀ x, tyy (x, 0) = −t0 , y = 0, |x| < L, v = 0, y = 0, |x| > L, {u, v} → 0,
as
(x 2 + y 2 )1/2 → ∞.
(6.14.8)
From (6.14.7) it follows that these conditions are equivalent to y = 0 ∀ x, σyx = 0, σyy (x, 0) = −t0 , y = 0, |x| < L, v = 0, y = 0, |x| > L, {u, v} → 0
as
(x 2 + y 2 )1/2 → ∞.
(6.14.9)
Note that for nonuniform loading, (6.14.8) will lead to more complicated expressions for σkl . The equation’s equilibrium tkl,k = 0 through (6.14.7) gives σkl,k = 0. Hence we have the field equations (λ + µ)(u,xx + v,xy ) + µ∇ 2 u = 0, (λ + µ)(u,xy + v,yy ) + µ∇ 2 v = 0.
(6.14.10)
These are identical to the Navier equations in classical elasticity. Using the Fourier transform ∞ 1/2 f (ξ, y) = (2π) f (x, y) exp(iξ x) dx, (6.14.11) −∞
the general solutions of (6.14.10) is obtained −1/2
∞
−∞ ∞
u = (2π)
v = (2π)−1/2
−∞
λ + 3µ i |ξ |A(ξ ) + (|ξ |y − B(ξ ) exp(−|ξ |y − iξ x) dξ, ξ λ+µ [A(ξ ) + yB(ξ )] exp(−|ξ |y − iξ x) dξ.
(6.14.12)
6.14 Nonlocal Stress Field at the Griffith Crack
135
The Hookean stress components are given by ∞ 2λ + 3µ 2µ σxx = √ |ξ |A(ξ ) + |ξ |y − B(ξ ) λ+µ 2π −∞ × exp(−|ξ |y − iξ x) dξ, ∞ −µ 2µ A(ξ )|ξ | + + |ξ |y B(ξ ) σyy = − √ λ+µ 2π −∞ × exp(−|ξ |y − iξ x) dξ, ∞ i|ξ | λ + 2µ 2µ −iξ A(ξ ) + −iξy + · B(ξ ) σyx = √ ξ λ+µ 2π −∞ × exp(−|ξ |y − iξ x) dξ. (6.14.13) The boundary condition σyx (x, 0) = 0 gives B(ξ ) =
ξ2 λ + µ A(ξ ). |ξ | λ + 2µ
(6.14.14)
Since σyy (x, y) = σyy (−x, y) and v(x, 0) = v(−x, 0) we have A(−ξ ) = A(ξ ) and the remaining boundary conditions (6.14.9) reduce to ∞ A(ζ )ζ cos(ζ x) dζ = T0 , x < 1, 0 ∞ A(ζ ) cos(ζ x) dζ = 0, x ≥ 1, (6.14.15) 0
where A(ξ ) = A(ζ ), ξ L = ζ, √ 2π λ + 2µ T0 = t0 L2 . 4µ λ + µ
x = x/L, (6.14.16)
The solutions of the dual integral equations (6.14.15) are well known in fracture mechanics (cf. Sneddon [1951, p. 424]: A(ξ ) = T0 J1 (ζ )/ζ,
B(ξ ) =
λ+µ |ζ |A(ζ ). λ + 2µ
(6.14.17)
Through (6.14.12) and (6.14.13) we can calculate u, v, σxx , σyy , and σxy . The stress tensor tkl is calculated by (6.14.3). Here we are interested in the behavior of the hoop stress along the crack line. After evaluating the integral over x and y in (6.14.3) we obtain ∞ H (ζ )J1 (ζ ) cos(ζ x) dζ, (6.14.18) tyy (x, 0)/t0 = − 0
where H (ζ ) = [(1 + 2 ζ 2 )1/2 + ζ ]−1 + ζ [(1 + 2 ζ 2 )1/2 + ζ ]−2 , ≡ l/L.
(6.14.19)
136
6 Nonlocal Linear Elasticity
The integral in (6.14.18) is to be evaluated numerically. However, it is more convenient to employ the asymptotic expansion of J1 (ζ ): J1 (ζ ) ∼ ζ −1/2 cos(ζ − 3π/4) + O(ζ −3/2 ),
|ζ | → ∞.
Using this in (6.14.18), to the order ( 0 ), tyy (x, 0) is obtained: √ + χ tyy (x, 0)/t0 = π/2 (I1/4 K3/4 + I3/4 K1/4 ) √ χ + (I1/4 K3/4 − I5/4 K7/4 + I3/4 K1/4 − I7/4 K5/4 ) , 2 χ = x − 1, (6.14.20) where Iν and Kν are modified Bessel’s functions of order ν they are evaluated at χ/2. At the crack tip, x = 1, and we obtain tyy (1, 0)/t0 = 0.57446 −1/2 .
(6.14.21)
However, hoop stress is not maximum at the crack tip. Table 6.14.1 gives the location and value of the hoop stress near the crack tip. From Table 6.14.1 it is clear that tyy max = 1.12tyy (1, 0),
(6.14.22)
x = x/L = 1 + 0.5(l/L).
(6.14.23)
and this maximum occurs at
From (6.14.21) and (6.14.22) we obtain a Griffith-like fracture criterion by equating tyy max to the cohesive tensile stress tc , i.e., t02 L = Kc ,
Table 6.14.1. Hoop stress near the crack tip. χ/2 0.0 0.1 0.2 0.25 0.3 1.0 1.5 2.0
tyy (x, 0)/tyy (1, 0) 1.00 1.09 1.10 1.12 1.10 0.89 0.75 0.66
(6.14.24)
6.14 Nonlocal Stress Field at the Griffith Crack
137
Figure 6.14.2. Hoop stress near the crack tip. After Ari and Eringen [1983]. where Kc = 0.531tc2 a.
(6.14.25)
The normal stress tyy along the crack line given by (6.14.20) is plotted in Figure 6.14.2 as a function of x = x/ l for = 0.22a/L, where a = l is taken as the lattice parameter. This graph also gives the results obtained by Elliott [1947] and Eringen et al. [1977]. 2L/a = 1000 and ν = 0.25 used by Elliott is also used here. Quantitative agreement is very good considering the fact that we are dealing with atomic size cracks and using a nonlocal continuum theory.
138
6 Nonlocal Linear Elasticity
Figure 6.15.1. Line crack under shear.
6.15 Line Crack Subject to Shear13 Here we present the solution of another important crack problem via nonlocal elasticity. Here a line crack, sliced in an isotropic elastic solid along the x-axis at −L < x < L, y = 0 and the crack surface, is subjected to a constant shear stress (Figure 6.15.1). In this case, the boundary conditions can be reduced to σyx = τ0 , σyy = 0, u(x, 0) = 0, {u, v} → 0
y = 0,
|x| < L,
y = 0 ∀ x, y = 0, |x| > L, as
(x 2 + y 2 )1/2 → ∞.
(6.15.1)
The solution of this problem was given by Eringen [1978]. The general solutions of the Navier equations are the same as given by (6.14.12) and (6.14.13), with A(ξ ) and B(ξ ) to be determined by use of the first three boundary conditions. Using σyy (x, 0) = 0, B(ξ ) is determined as
B(ξ ) =
λ+µ |ξ |A(ξ ). µ
(6.15.2)
Noting that A(−ξ ) = −A(ξ ) the displacement and stress fields are reduced to the forms 13 Eringen [1978].
6.15 Line Crack Subject to Shear
u(x, y) v(x, y) σxx (x, y) σyy (x, y) σyx (x, y)
139
1/2 λ + 2µ λ+µ ∞ 2 − ξy e−ξy cos(ξ x) dξ, A1 (ξ ) = λ+µ π µ 0 1/2 λ+µ ∞ µ 2 A1 (ξ ) + ξy e−ξy sin(ξ x) dξ, = π µ λ+µ 0 1/2 ∞ 2 = −2 (λ + µ) A1 (ξ )(2ξ − ξ 2 y)e−ξy sin(ξ x) dξ, π 0 1/2 ∞ 2 = −2 (λ + µ) A1 (ξ )ξ 2 ye−ξy sin(ξ x) dξ, π 0 1/2 ∞ 2 (λ + µ) A1 (ξ )ξ(1 − ξy)e−ξy cos(ξ x) dξ,(6.15.3) = −2 π 0
where we wrote A(ξ ) = iA1 (ξ ). The remaining two boundary conditions lead to , 2 ∞ C(ζ )ζ 1/2 cos(ζ x) dζ = −T0 , π 0 ∞ C(ζ )ζ −1/2 cos(ζ x) dζ = 0,
0 < x < 1, x > 1,
(6.15.4)
0
where ζ −1/2 C(ζ ) = A(ξ ), x = x/L, 2 T0 = τ0 L /2(λ + µ).
ζ = ξ L, (6.15.5)
The solution of this dual integral equation is given in classical fracture mechanics , π C(ζ ) = − (6.15.6) T0 ζ −1/2 J1 (ζ ), 2 where J1 (ζ ) is the Bessel’s function. With σkl given by (6.15.3) the nonlocal stress tensor can be calculated by tkl = α(|x − x|)σkl (x ) da(x ). (6.15.7) R
Eringen [1978] uses a nonlocal kernel of the type α(|x − x|) =
1 (β/a)2 exp[−(β/a)2 (x − x) · (x − x)], π
(6.15.8)
where β is an arbitrary constant length and a is the lattice parameter. With this tyy (x, 0) is calculated through (6.15.7) and σyx is given by (6.15.3): ∞ tyx /τ0 = K(ζ )J1 (ζ ) cos(ζ x) dζ, (6.15.9) 0
140
6 Nonlocal Linear Elasticity
Figure 6.15.2. The behavior of K(ζ ) versus ζ . After Eringen [1978].
where 2 K(ζ ) = (1 + 2ζ 2 )[1 − (ζ )] − √ ∈ ζ exp(− 2 ζ 2 ), π ≡ a/2βL. (6.15.10) Here (z) is the error function defined by (z) = 2π −1/2
z
exp(−t 2 ) dt.
0
K(ζ ) is displayed in Figure 6.15.2 as a function of ζ . Calculations of the stress field (6.15.9) have been carried out on computers. The results are displayed in Figures 6.15.3 to 6.15.5 for = 1/20, 1/50, 1/100, and 1/200. It can be seen that satisfaction of the boundary condition t21 (x, 0) = τ0 for |x| < L is not very good for large values of . However, for = 1/100 and the lower boundary condition on tyx (x, 0) for |x| < L is satisfied in a strong approximate sense. The relative error is less than 1.5%. Thus, we conclude that the classical solution (6.15.6) for C(ζ ) leads to satisfactory results for 2βL/a ≥ 100. The stress concentration occurs near the crack tip, and is given by tyx (L, 0)/τ0 = c −1/2 ,
(6.15.11)
6.15 Line Crack Subject to Shear
141
Figure 6.15.3. t21 /τ0 versus x1 /L for = 1/20 and = 1/50. After Eringen [1978]. where c converges to about −0.30, i.e., c −0.30.
(6.15.12)
The following significant observations may be made: (i) The maximum shear stress occurs near the crack tip with a finite value. (ii) The shear stress at the crack tip becomes infinite as the internal characteristic length a → 0. This is the classical elasticity limit of the square root singularity. (iii) When tyx max = tc = (cohesive shear stress), fracture will occur. In the case τ02 L = KG ,
(6.15.13)
where KG is a constant given by KG = (a/2βc2 )tc2 .
(6.15.14)
Expression (6.15.13) is none other than the Griffith criterion for brittle fracture.
142
6 Nonlocal Linear Elasticity
Figure 6.15.4. t21 /τ0 versus x1 /L for = 1/100. After Eringen [1978]. We have arrived at this criterion via a maximum stress hypothesis unifying the classical macroscopic concept of fracture in the strength of materials. (iv) The cohesive stress may be estimated if one employs the Griffith definition of surface energy in terms of which KG was given originally, namely KG = 4µγ /π(1 − ν). Equating this to (6.15.14) we have tc2 l = Kc γ ,
(6.15.15)
Kc = 8µc2 β/π(1 − ν).
(6.15.16)
where Employing the values of γ and the elastic constants γ = 1975 CGS, ν = 0.291,
µ = 6.92 × 1011 CGS, ◦
l = a = 2.48 A,
6.15 Line Crack Subject to Shear
143
Figure 6.15.5. t21 /τ0 versus x1 /L for = 1/200. After Eringen [1978]. where a is the atomic lattice parameter, we obtain + tc /µ = 0.19287 β.
(6.15.17)
Suppose that at a radial n atomic distance, r = na, the nonlocal effects attenuate to 1% of its value at r = 0. Using (6.15.8) we find that √ β = 2.146/n, tc /µ = 0.2825/ n. (6.15.18) For n = 4 and 6 this gives tc /µ = 0.141, tc /µ = 0.115,
n = 4, n = 6.
These results are in the right range, well accepted by materials scientists. For example, Kelly [1966] gives tc /µ = 0.11. The solution of the problem “line crack,” subject to antiplane shear in a nonlocal elastic solid, was given by Eringen [1979].
144
6 Nonlocal Linear Elasticity
Figure 6.16.1. Crack subject to antiplane shear (Mode III).
6.16 Interaction of a Dislocation with a Crack14 A homogeneous, isotropic elastic solid of infinite extent is weakened by a crack located at −L < x1 < L, x2 = 0, −∞ < x3 < ∞, where xk are rectangular coordinates (Figure 6.16.1). A dislocation intersects the plane x3 = 0 at S (x1 = ξ , x2 = η). The solid is subject to a constant antiplane shear at x2 = ±∞. The classical solution of this problem was given by Louat [1965]. Here we obtain the solution of this in a form better for our purposes, eliminating notational problems and taking limits. The problem is two dimensional. The classical stress field is given by ∗L f (t) σ23 − iσ13 = A dt, (6.16.1) z −t −L √ where z = x1 − ix2 , i = −1, and f (t) is the distribution function which is the solution of the equation of equilibrium of the forces acting on the crack surface ∗L f (t) dt = σd (x) + σ0 , A = µλ0 /2π. (6.16.2) A t −x −L Here the integral denotes a Cauchy principal value, µ is the shear modulus, λ0 is the displacement vector of a unit positive dislocation, and σ0 and σd (x) are the stress fields at the crack surface due to the applied load and the dislocation, respectively. The solution of the integral equation (6.16.2) is well known, Tricomi [1951]: ∗L + dt 1 Q L2 − t 2 [σ0 + σd (t)] , f (x) = − +√ √ 2 2 2 2 t −x π A L − x −L L − x2 (6.16.3) 14 Eringen [1983].
6.16 Interaction of a Dislocation with a Crack
145
where Q is a constant to be determined from the condition that
L −L
f (x) dx = n.
(6.16.4)
Here nλ0 is the total dislocation content of the distribution function f (x). The stress field σd (t) is given by σd (t) =
µb(t − ξ ) . 2π[(t − ξ )2 + η2 ]
(6.16.5)
Substituting this into (6.16.3) and integrating we obtain . + 2 2 ζ −L 1 σ0 x b ζ 2 − L2 f (x) = √ − 1 + Q , − + πλ0 2(ζ − x) 2(ζ − x) L2 − x 2 πA (6.16.6) where ζ = ξ + iη, ζ = ξ − iη. Using (6.16.4) we get Q = n/π and carrying f (x) into (6.16.1), after some tedious integrations, we obtain + 1 z ζ 2 − L2 bA σ23 − iσ13 = σ0 + 1− + −1 − 2λ0 z − ζ z2 − L2 z2 − L2 . 2 ζ − L2 1 b A + +n + . (6.16.7) + 1 − + λ0 z−ζ z2 − L2 z2 − L2 The forces acting on the dislocations at (ξ, η), due to the crack, are given by F1 = bσ23 ,
F2 = bσ13 ,
(x1 = ξ, x2 = η).
(6.16.8)
If the dislocation is located along the x1 -axis and the crack is free of traction we set η = 0 and add bA σ0 + σd (x1 ) = σ0 + (6.16.9) λ0 (z − ξ ) to the right-hand side of (6.16.7) to obtain the stress field at any point outside of the crack σ23 − iσ13 + σ0 + σd (x1 ) + 1 b bA ξ 2 − L2 σ0 z + A = + +n + ,(6.16.10) λ0 λ0 z − ξ z2 − L2 with the body loaded at x2 = ±∞ with a constant shear σ23 = ±σ0 . If the crack contains no dislocations then n = 0. Two special cases are important:
146
6 Nonlocal Linear Elasticity
(i) No Crack and σ0 = 0. In this case the Hookean (classical) stress field is given by µb σ = . (6.16.11) 2πz The dislocation is now at the origin of the coordinates. (ii) No Dislocation. In this case A = 0 and we have σ =+
σ0 z z2 − L2
.
(6.16.12)
Both of these results are well known in the literature. The nonlocal stress field is obtained by solving the differential equation (1 − l 2 ∇ 2 t) = σ,
(6.16.13)
where t = t23 − it13 ,
σ = σ23 − iσ13 + σ0 + σd (x1 ).
(6.16.14)
Since ∇ 2 σ = 0, t = σ is a special solution of (6.16.13), the complimentary solution of (6.16.13) is tc = Kν (r/ l)(Aν eiνθ + Bν e−iνθ ),
(6.16.15)
where Aν , Bν , and ν are constants, Kν (p) is a modified Bessel’s function of order ν, and (r, θ) are the polar coordinates. The boundary conditions on the crack surface is t23 = 0. Taking the origin r = 0 of the coordinates at the right-hand crack tip and writing r = r1 , θ = θ1 in (6.16.15), the boundary condition is fulfilled if we set ν = 1/2, since all other solutions lead to singularities at r1 = 0. The classical stress field σ is singular at the screw dislocation x1 = ξ , x2 = 0. The surface traction trz on the edge surface of the dislocation must also vanish, in accordance with the boundary conditions. To fulfill this condition we take ν = 1 and move the origin to the coordinates to x1 = ξ , x2 = 0. This is expressed by writing r = rd , θ = θ3 and rd eiθ3 = r1 eiθ1 − x0 .
(6.16.16)
The general solution of (6.16.13), appropriate to the present problem, is then given by t = (πl/2r1 )1/2 e−r1 / l (C1 eiθ1 /2 + C2 e−iθ1 /2 ) + K1 (rd / l)(C3 eiθ3 + C4 e−iθ3 ) + σ.
(6.16.17)
In order to determine Ci we express the stress field in polar coordinates tθ z − itrz = (t23 − it13 )e−iθ1 .
(6.16.18)
6.16 Interaction of a Dislocation with a Crack
147
We imagine the crack tip as the limit of a small circle with radius r1 = approaching zero. For small we have, approximately, z = L + z1 = −L + z2 = ξ + z3 = L + x0 + z3 ,
z1 = eiθ1 .
(6.16.19)
Using these in (6.16.10) we obtain L 1/2 iθ1 /2 nλ0 µb 2L 1/2 µb σ = σ0 + . 1+ − 1+ e 2r1 2πL b 2πL x0 (6.16.20) Equation (6.16.17) now gives nλ0 µb 2L 1/2 L 1/2 −iθ1 /2 µb tθ z − itrz = σ0 + 1+ − 1+ e 2r1 2πL b 2πL x0 1/2 πl e−r1 / l (C1 e−iθ1 /2 + C2 e−3iθ1 /2 ) + 2r1 r1 r1 + K1 (|x0 |/ l) C3 eiθ1 − C3 + C4 e−iθ1 − C4 e−iθ1 . (6.16.21) x0 x0 The boundary condition on trz requires that lim trz = 0.
r1 →0
This condition is fulfilled approximately (x0 / l 1) if C2 = 0 and 1/2 nλ0 µb 2L 1/2 L µb C1 = − σ0 + . (6.16.22) 1+ − 1+ πl 2πL b 2πL x0 Considering the internal characteristic length l = a = atomic lattice parameter, x0 /a 1 is certainly fulfilled if the dislocation is located at several atomic parameters away from the crack tip. At the core of dislocation, as rd → 0, trz must vanish. This gives C4 = 0 and µb . (6.16.23) 2πL The general solutions satisfying all the boundary conditions, are then given by πl 1/2 −r1 / l e C1 eiθ1 /2 + K1 (rd / l)C3 eiθ3 + σ, (6.16.24) t= 2r1 C3 = −
with C1 and C3 given by (6.16.22) and (6.16.23). In polar coordinates this reads πl 1/2 −r1 / l e C1 e−iθ1 /2 + K1 (rd / l)C3 ei(θ3 −θ1 ) tθ z − itrz = 2r1 µb nλ0 + (r1 r2 )−1/2 ei(θ2 −θ1 )/2 σ0 re−iθ + 1+ 2π b 1/2 µb . (6.16.25) + (r1 e−iθ1 − x0 )−1 [x0 (x0 + 2L) 2π
148
6 Nonlocal Linear Elasticity
The special cases (i) and (ii) can now be obtained from this result. (i) No Crack tθ z − itrz =
µb 1 [1 − ρK1 (ρ)], 2πL ρ
(6.16.26)
with the origin of coordinates at the dislocation point, so that ρ = rd / l. (ii) No Dislocation, but Crack 2 1/2 2r L 1/2 i(−θ +θ2 /2) −r1 / l e−iθ1 /2 . (6.16.27) e −e tθ z − itrz = σ0 2r1 Lr2 It is clear that tθ z acquires its maximum near the crack tips. tθ z , along the crack line r1 ≥ 0, is given by γρ −1/2 −1/2 −ρ tθ z /σ0 = (2γρ) (1 + γρ) 1 + , (6.16.28) −e 2 where ρ = r1 / l, γ = l/L. tθ z = 0 at the crack tip ρ = 0, and has a maximum at ρ = ρc which is the root of γρ −3/2 . e−ρ (1 + 2ρ) = 1 + 2
(6.16.29)
Since γ 1 (γ ≤ 10−6 ), we see that ρc is independent of L and is given by ρc 1.2565.
(6.16.30)
The maximum stress is given by tθ z max = σ0
−1/2 −1 + l 1 2ρc + √ . L 2ρc
(6.16.31)
From (6.16.28) we also observe that tθ z → σ0 as ρ → √ ∞, as it should be. Following the classical tradition, if we express KIII = πLσ0 , then (6.16.28) may be put into the form √ √ Tθ (ρ) = γ tθ z /σ0 = πltθ z /KIII γρ −1/2 (6.16.32) = (2ρ)−1/2 1 + γρ 1 + − e−ρ . 2 This is displayed in Figure 6.16.2 in the vicinity of the crack tip. The classical result is also shown by a dotted line. From the figure, it is clear that classical shear deviates considerably from the nonlocal one, in the region 0 ≤ ρ < 5. In fact, it becomes infinite at the crack tip.
6.16 Interaction of a Dislocation with a Crack
149
Figure 6.16.2. Nondimensional shear (no dislocation). After Eringen [1979]. A perfect crystal will rupture when tθ z max = ty , where √ ty is the cohesive yield stress. At this value KIII takes its critical value Kc = πlσ0c so that + √ Kc 1 3.9278 l. = (πl)1/2 2ρc + √ (6.16.33) ty 2ρc In (6.16.33) we may set l = e0 a, where a is the lattice parameter, and e0 is determined by matching the plane shear wavelength at the end of the Brillouin zone with that of the lattice dynamics, as discussed in Section 6.9 (e0 = (π 2 − 4)1/2 /2π 0.39). √ Table 6.16.1 gives a comparison of Kc = 4µγs (classical), K (experiments of Ohr and Chang [1982], and Kg (present nonlocal). Classical estimates, based on the surface energy γs , are expected to be inaccurate, considering the fact that even with the best present-day techniques availabe, γs could not be measured to an accuracy better than a factor of 2. On the other hand, the Ohr and Chang experiments required the measurement of the length of the plastic zone among the other constants. This implies the existence of dislocations. Thus, the nonlocal results are expected to be more faithful to the real values.
150
6 Nonlocal Linear Elasticity
Table 6.16.1. Critical stress intensity factors.
Material Al (fcc) Cu (fcc) Ni (fcc) Fe (bcc)
a (10−8 cm)∗ 4.05 3.61 3.52 2.87
∗ Kittel [1974].
∗∗ Rice and Thomson [1974]. # Kelly et al. [1967]. ## Ohr and Chang [1982].
µ (1011 cgs)∗∗ 2.51 4.05 7.48 6.9
γs (cgs)∗∗ 840 1688 1725 1975
ty (1011 cgs)# 0.262 0.137 0.274 0.71
Classical Kc /ty (10−3 cm1/2 ) 1.11 3.86 2.62 1.04
Experiment## K/ty (10−3 cm1/2 ) 0.31 0.66 0.66 0.23
Present Kg /ty (10−3 cm1/2 ) 0.49 0.47 0.46 0.42
6.16 Interaction of a Dislocation with a Crack
151
Figure 6.16.3. Nondimensional shear stress due to dislocation interaction. After Eringen [1983].
Dislocation and Crack The stress field is given by (6.16.25) along the crack line x1 ≥ L, x2 = 0 gives trz = 0 and with r = 0: tθ z = t c + t dc ,
(6.16.34)
where γρ −1/2 −ρ (1 + γρ) 1 + , −e t γ /σ0 ≡ T1 = (2ρ) 2 1/2 √
−1/2 t dc γ γρ 2 e−ρ − 1− 1+ = T2 = (2ρ)−1/2 1 + σ0 β 2 γ x0 1/2 2ρ − sgn(ρ − x 0 ) K1 (|ρ − x 0 |) γ −1 γρ −1/2 2 1/2 ρ + 1+ , 1+ −1 2 γ x0 x0 c√
−1/2
x 0 = x0 /e0 a,
β=
µb . 2πLσ0
(6.16.35)
152
6 Nonlocal Linear Elasticity
When the dislocation is absent t dc = 0. Consequently, t dc is the shear stress due to the interaction of the dislocation with the crack. At the crack tip ρ = 0 and we have (6.16.36) tθ z /σ0 β = γ −1 K1 (x 0 ). This shows that for positive dislocation (b > 0) the shear stress is positive and the crack tip will tend to close up for b > 0. For b < 0 the crack will open. However, the stress given by (6.16.36) tends to zero quickly with distance. It becomes large when the dislocation is very close to the crack tip. Figure 6.16.3 displays T2 (ρ) for several values of x 0 = (1.7, 3.1, 4.1, 6.1, and 10.1) keeping γ = 10−8 fixed. The crack tip is not stress free. The maximum of T2 occurs close to dislocation. For example, in the case x 0 = 3.1, the maximum occurs at x = 4.4 and in the case x 0 = 10.1 at x = 11.2. In order to get an idea of the combined effects, in Figure 16.6.4, the ratio tθ z /σ (for the combined stress) is plotted with β = 10−4 . When dislocation is located close to the maximum of T1 , the combined effect is large. For example, while T1 max 0.451 for the crack alone, for the combined effect Tmax = 0.63, and Kg tot /Kg1 0.71.
(6.16.37)
This suggests that a dislocation, located at a distance of two lattice parameters away from the crack tip, reduces the fracture toughness by about 30%.
Figure 6.16.4. Nondimensional shear stress due to dislocation interaction with crack. After Eringen [1983].
6.17 Interaction Between Defects and Dislocation
153
A more realistic picture requires the interaction of a large number of dislocations with the crack (dislocation pile-up near the crack).
6.17 Interaction Between Defects and Dislocation Crystalline solids contain dislocations and point defects whose interactions with solids are responsible for the many properties of imperfect crystals. Materials scientists have studied these interactions via the vehicle of classical (local) continuum mechanics. In fact, these topics occupy several chapters in several books on dislocations (cf. Nabarro [1967], Hirth and Lothe [1968], Teodosiu [1982]). However, most of the previous calculations were carried out within the framework of classical linear elasticity, which led to divergent interaction energies with the decreasing distance between the point defects and dislocation lines. Recently, Vörös and Kovács [1995] have studied some of these interactions by means of the nonlocal elasticity. Here we give an account of the subject. As we know, a dislocation is a discontinuity of the displacement field along a cut surface. The volume defect is characterized by the total volume change of the body caused by a displacement. In classical elasticity, sources (such as displacement fields) are characterized by the centers of force dipoles. These dipoles are considered localized to the place of the defect.
A. Point Defect Suppose that a displacement field in a nonlocal elastic solid is discontinuous along a surface S. We can determine the displacement field elsewhere, by solving the equations of equilibrium λiklm,i (x − x )ul,m (x ) dv + ρfk = 0. (6.17.1) V
The stress field is given by tik =
V
λiklm (x − x )ul,m (x ) dv .
The Green’s function for (6.17.1) must satisfy λiklm,i (x − x )Glj,m (x − x
) dv + δj k δ(x − x
) = 0, V
(6.17.2)
(6.17.3)
where Glj is the Green’s function, δ(x) is the Dirac-delta measure, and the subscript
. Multiplying (6.17.3) by u (x
), and m denotes differentiation with respect to xm k integrating over the volume, we obtain uj (x) = − λiklm,i (x − x )Glj,m (x − x
)uk (x
) dv dv
. (6.17.4) V
V
154
6 Nonlocal Linear Elasticity
Using the symmetry property of the Green’s function and exchanging x and x
, this equation can be written in the form uj (x) = − λiklm,i (x
− x )Glj,m (x − x)uk (x
) dv dv
. (6.17.5) V
V
This volume integral may be transformed to a surface integral by disclosing from the total volume the surface S, by a closed surface consisting of surfaces S + and S − that are parallel to S. Integrating by parts and using the Green–Gauss theorem, in the limit S + , S − → S, we obtain uj (x) = (6.17.6) λiklm (x
− x )Glj,m (x − x )[uk (x
)] dv dai
, S
where
V
[uk (x
)] =
lim
S + ,S − → S
uk (x
)S + − uk (x
)S −
(6.17.7)
is the jump of the displacement vector along the surface S. For example, if [u(x
)] = b = const., then (6.17.6) gives the displacement field of a dislocation. Suppose that the defect is located inside S at a point P with the position vector x0 (Figure 6.17.1), then x
can be written as
where r varies along S and
x
= x0 + r,
(6.17.8)
|r| |x0 − x |.
(6.17.9)
Substituting (6.17.8) into (6.17.6), to a first-order approximation we have uj (x) = λiklm (x0 − x )Glj,m (x − x ) dv
[uk (x0 + r)] dair V S
1 = 2 λiklm (x0 − x )Glj,m (x − x ) dv {[uk (x0 + r)] dair V
+ [ui (x0 + r)] dakr },
S
where we used the symmetry regulation λiklm = λkilm . The quantity aki (x0 ) = 21 {[uk (x0 + r)] dair + [ui (x0 + r)] dakr } S
(6.17.10)
(6.17.11)
is called the kinematical tensor of the defect. This can be used to characterize the basic properties of the point defects. Substituting (6.17.11) in (6.17.10), we have uj (x, x0 ) = Plm (x , x0 )Glj,m (x − x ) dv , (6.17.12) V
6.17 Interaction Between Defects and Dislocation
155
z
S
r x0 x″
y
x
Figure 6.17.1. Small surface of discontinuity. where
Plm (x , x0 ) = λiklm (x0 − x )aik (x0 )
(6.17.13)
characterizes the sources off elastic displacement due to a given lattice defect. These arise from the force dipoles and they may be named elastic poles. In the special case λiklm (x0 − x ) = λ0iklm δ(x0 − x ), where λ0iklm is constant, (6.17.12) reduces to the classical form obtained by Kröner [1981] and by Gairola [1982]. The strength of a pole is defined by 0 Plm = Plm (x , x0 ) dv = λ0iklm aik (x0 ) = Plm (6.17.14) V
and is the same for local as well as nonlocal theory, since λiklm (x0 − x ) dv = λ0iklm . V
The Fourier transform of (6.17.3) is given by ki km Gij (k)λiklm (k) + δij = 0. In the Fourier space an isotropic quasi-continuum may be defined by 0 λiklm , |k| ≤ k0 , λiklm (k) = 0, |k| > kB ,
(6.17.15)
(6.17.16)
156
6 Nonlocal Linear Elasticity
where λ0iklm is the constant classical elastic modulus and kB is the wave number at the boundary of the first Brillouin zone. From (6.17.15) and (6.17.16) it follows that in the region |k| ≤ kB the Green’s function G and GQ of the local- and quasi-continuum are the same, i.e., G0ij (k) = Gik (k).
(6.17.17)
The Fourier transform of (6.17.12), upon using (6.17.13) and (6.14.14), gives uj (k) = −ikm λ0iklm Glj (k)aik (x0 ) exp(ik · x0 ).
(6.17.18)
Hence, in the first Brillouin zone |k| ≤ kB , the displacement field uj (k), due to the defect, is the same for both the local- and quasi-continuum, and is determined once the kinematical tensor of the defect is known. The inverse Fourier transform of (6.17.18) determines the displacement field in the physical domain. From these it follows that the strain and stress tensors are given by Q eik (k) = eik (k), when |k| ≤ kB , Q tik (k) = σik (k), Q
eik (k) = 0,
Q
tik (k) = 0
when
|k| > kB ,
(6.17.19)
where eik and σik denote, respectively, the strain and stress tensors arising from the defect in the local continuum. Using (6.17.13) and (6.17.14) we can also determine the displacement field, from (6.17.18), of an elastic pole in the Fourier space uj (k) = −ikm Plm Glj (k),
|k| ≤ kB ,
(6.17.20)
where 0 (x0 ) exp(ik · x0 ), Plm (k) = λ0iklm aik (x0 ) exp(ik · x0 ) = Plm |k| ≤ kB . (6.17.21)
B. Interaction Energy Interaction energy between the two defects A and B are given by 1 ∗A A B B elm tlm dv = tlm (k) e lm (k) d 3 k, UK = 3 (2π) V |k|
(6.17.22)
where e lm denotes the complex conjugate. Using (6.17.12) for the defect B, we find uB l,m (k) = −km kn Pj n (k)Glj (k), |k| ≤ kB . (6.17.23) B (k) = −k k P (k)λ σlm k n jn iklm Gij (k),
6.17 Interaction Between Defects and Dislocation
157
Substituting these into (6.17.22) and using the Green–Gauss theorem we have 1 1 ∗A 3 e UK = (k)P (k) d k = a (x) lm lm ik (2π)3 |k|
(6.17.24)
We now use this result to determine the interaction energy between point defects and dislocations. Foreign atoms in crystals cause a homogeneous volume defect. The kinematical tensor can be identified with the stress-free transformation introduced by Eshelby [1961]: T aik = eik =−
1−ν ην Vh δik , 1+ν
(6.17.25)
where ν is the Poisson ratio and ην = (Vh − V0 )/V0 is the volume difference between the host and foreign atoms. The classical stress field of an edge dislocation lying along the z-axis with the Burger vector b = (−1, 0, 0) is well known (cf. Hirth and Lothe [1968, p. 74]). In plane polar coordinates (r, θ) in the (x, y)-plane they are given by µb (2 + cos 2θ) sin θ, 2π(1 − ν)r µb sin θ cos 2θ, =− 2π(1 − ν)r
µb cos θ cos 2θ, 2π(1 − ν)r 2µbν sin θ, =− 2π(1 − ν)r (6.17.26)
σxx = −
σxy =
σyy
σzz
where µ is the classical shear modulus. The Cartesian components tik of the nonlocal stress field are then given by 1 tik (x) = σik (k) exp(−k · x) d 2 k. (6.17.27) (2π)3 |k|≤kB Substituting from (6.17.26) and integrating we obtain µb sin θ {[1 − J0 (ρ)](2 + cos 2θ) − J2 (ρ)(3 cos2 θ − sin2 θ)}, 2π(1 − ν)r µb sin θ {[1 − J0 (ρ)] cos 2θ − J2 (ρ)(3 cos2 θ − sin2 θ)}, = 2π(1 − ν)r µb cos θ = {[1 − J0 (ρ)] cos 2θ − J2 (ρ)(3 sin2 θ − cos2 θ)}, 2π(1 − ν)r µbν sin θ = ρ ≡ kB r, (6.17.28) [1 − J0 (ρ)], 2π(1 − ν)r
txx = tyy txy tzz
where J0 and J2 denote the zero and second-order Bessel functions. In the limit kB → ∞, (J0 , J2 ) → 0, and these nonlocal stresses reduce to the classical ones. In Section 6.8, using a different kernel we have obtained the stress field in an edge
158
6 Nonlocal Linear Elasticity
dislocation. The reader may compare the expression (6.11.14) with (6.17.28) by converting the cylindrical components of the stress tensor to rectangular components. Vörös and Kovács gave a three-dimensional graph for the classical and nonlocal shear stresses in the neighborhood of an edge dislocation (Figure 6.17.2).
Figure 6.17.2. (a) The change of the stress component σxy , in the neighborhood of an edge dislocation line in a classical continuum. (b) The change of the stress component, txy , in the neighborhood of an edge dislocation line in a quasi-continuum. After Vörös and Kovács [1995].
6.17 Interaction Between Defects and Dislocation
159
According to (6.17.25), a small volume defect (dilatation center) interacts only by a hydrostatic stress field in the quasi-continuum as well. The interaction energy is then given by UK =
1 − J0 (ρ) µbηv VH 1 − J0 (kB r) sin θ = U0 sin θ. a ρ ρ
(6.17.29)
From this it can be seen that the interaction energy in a quasi-continuum remains finite as r → 0 (see Figure 6.17.3). In the limit as kB → ∞, J0 → 0, and the classical Cottrell–Bilby result is obtained (Cottrell and Bilby [1949]). From (6.17.29) we can obtain the force acting on a point defect along the direction r: π ∂U K Fr = − = U0 ∂r a
1 − J0 (ρ) sin θ − J1 (ρ) . ρ ρ
(6.17.30)
The interaction force is displaced in Figure 6.17.4. This figure displays the interaction force as a function of the distance between the dislocation and the point defect. Vörös and Kováks have also discussed the interaction between dislocations √ and vacancies. For fcc crystals V0 = a 3 /4, Vh = V0 (1 + ηv ), and b = a/ 2, with these values U0 = 21 µb3 ηv (1 + ηv ). The maximum binding energy (sin θ = ±1)
Figure 6.17.3. Change of the interaction energy between an edge dislocation and a point defect around the dislocation line (size effect). After Vörös and Kovács [1995].
160
6 Nonlocal Linear Elasticity
Figure 6.17.4. Interaction force as a function of the distance between an impurity atom and an edge dislocation (size effects). After Vörös and Kovács [1995].
is then obtained to be Ub max = 0.211µb3 ηv (1 + ηv ).
(6.17.31)
Using the data given by King [1966] for ηv , the numerical values for Al- and Cu-based solid–solution alloys are given in Table 6.17.1.
Table 6.17.1. Aluminum µ = 2.6 × 104 Nm m−2 , b = 2.86 × 10−10 m Alloy atom ηv (%) Ubmax (eV) Mg +40.82 0.460 Si −15.78 0.106 Cr −57.23 0.195 Mn −46.81 0.199 Fe −41.00 0.193 Cu −37.77 0.189 Zn − 5.74 0.045 Ag + 0.12 0.001 Sn +24.09 0.240
Copper µ = 4.6 × 104 Nm m−2 , b = 2.55 × 10−10 m Alloy atom ηv (%) Ubmax (eV) Al +19.99 0.241 Cr +19.72 0.236 Zn +17.10 0.203 Ag +43.32 0.626 Sn +83.40 1.539 Au +47.59 0.707
6.18 Straight Wedge Disclination
161
In view of the discussion given here, and previously in other sections (e.g., Section 6.8), one may ask the question as to what kernel is preferable to the various choices elaborated on in Section 6.9. In general, all such kernels appear to lead qualitatively to the same results, namely, the elimination of singularities of the local theory and attenuation with distance. By the adjustment of a constant such as kB , or of an internal characteristic length l, the maximum stress can be made identical to the experimental results. However, quantitative precision at all points requires help from the atomic theory and/or experiments. In a series of papers Pan [1995a], [1995b], [1996a] and [1996b] discussed the interaction of circular second-phase particle with a screw dislocation, the interaction of a dislocation with a surface crack, the interaction energy of a dislocation and a point defect in BCC iron, and the interaction of a dislocation and inclusion.
6.18 Straight Wedge Disclination A disclination is a discontinuity in a twist about an axis. Povstenko [1995] calculated the stress field arising from a straight wedge dislincation about the z-axis with the Frank vector = (0, 0, 3 ). The solution of this problem in classical elasticity is given by (De Wit [1973]): ν ν , σθ θ = A3 ln r + +1 , σrr = A3 ln r + 1 − 2ν 1−ν µ3 σrθ = 0, , (6.18.1) A3 = 2π(1 − ν) where µ is the shear modulus, ν is the Poisson ratio, and (r, θ, z) are the polar coordinates. Taking advantage of (6.9.37) with the operator P , given by ∂ = ∇2, (6.18.2) P ∂xr we need to obtain the solution of ∇ 2 t kl − st kl = −σkl ,
(6.18.3)
where the overbar denotes the Laplace transform. This equation is valid in rectangular coordinates, but it can be transformed to curvilinear coordinates. Since (6.18.1) does not depend on θ and z, (6.18.3) takes the relatively simple form given by Povstenko (see Appendix A): d 2 t rr ν 1 dt rr 2 + − 2 (t rr − t θ θ ) − st rr = −A3 ln r + , dr 2 r dr r 1 − 2ν d 2t θ θ ν 2 1 dt θ θ + 2 (t rr − t θ θ ) − st θ θ = −A3 ln r + + 1 . (6.18.4) + r dr r 1 − 2ν dr 2
162
6 Nonlocal Linear Elasticity
Using combinations t rr + t θ θ and t rr − t θ θ , Povstenko gave the solution of these equations √ √ √ √ t rr = AI0 ( sr) + BK0 ( sr) + CI2 ( sr) + DK2 ( sr) A3 ν A3 1 + ln r + +2 2 2, s 1 − 2ν s r √ √ √ √ t θ θ = AI0 ( sr) + BK0 ( sr) − CI2 ( sr) − DK2 ( sr) A3 ν 2A3 1 + ln r + +1 − 2 2, s 1 − 2ν s r
(6.18.5)
where I0 (z), I2 (z) and K0 (z), K2 (z) are the modified Bessel functions of the zero and second-order and the first and second kinds, respectively. Regularity at z = ∞ demands that we set A = C = 0. At the origin, we have z K0 ∼ − ln +γ , 2
K2 ∼
2 1 − , 2 z 2
with γ = 0.5772 . . . being the Euler constant. Thus the regularity at the origin gives B = A3 /s, D = −A3 /s. With this, the inverse Laplace transform of (6.18.5) is obtained to be 2 2 trr r ν r 2τ = ln r + − 21 Ei − + 2 1 − exp − , A3 1 − 2ν 4τ r 4τ 2 2 tθ θ r ν r 2τ 1 = ln r + + 1 − 2 Ei − − 2 1 − exp − , (6.18.6) A3 1 − 2ν 4τ r 4τ where Ei(x) is the exponential–integral function, defined by Ei(x) ≡
x
−∞
et dt, t
x < 0.
It is expected that as τ → 0, (6.18.5) becomes equal to the classical solution (6.18.1). For τ = 0 as r → 0, (6.18.5) gives √ ν (6.18.7) − 21 (γ − 1) , lim trr = N = A3 ln(2 τ ) + r→0 1 − 2ν which does not vanish. Adding the constant −N to the solution (6.18.6) we obtain trr = ln ρ − 21 Ei(−ρ 2 ) + A3 tθ θ = ln ρ − 21 Ei(−ρ 2 ) − A3
1 [1 − exp(−ρ 2 )] + 21 (γ − 1), 2ρ 2 1 [1 − exp(−ρ 2 )] + 21 (γ + 1). (6.18.8) 2ρ 2
6.18 Straight Wedge Disclination
163
In Figure 6.18.1 trr /A3 is displayed against ρ along the classical solution. The solution for corresponding to the kernel α(x, τ ) =
1 2π 2 l 2 τ 2
√ K0 ( x · x/ lτ )
(6.18.9)
is given by ν 2τ 2 l 2 trr + K0 (r/τ l) − K2 (r/τ l) + 2 , = ln r + A3 1 − 2ν r tθ θ ν 2τ 2 l 2 = ln r + + 1 + K0 (r/τ l) + K2 (r/τ l) − 2 . (6.18.10) A3 1 − 2ν r The behavior of the stresses (6.18.10) are similar to those given by (6.18.8). In his paper Povstenko also studied the straight twist disclination. Since the method of solution is identical to the one discussed above, we do not give this solution here.
Figure 6.18.1. Nondimensional stress for straight wedge disclination. After Povstenko [1995].
164
6 Nonlocal Linear Elasticity
6.19 Somigliana-Type Representation15 Field equations of the nonlocal isotropic solids, in the isothermal case, are given by ∂ {λ(|x − x|)ur,r (x , t)δkl + µ(|x − x|)[µk,l (x , t) + ul,k (x , t)]} dv(x ) ∂xk V + ρfl (x, t) − ρ u¨ l (x, t) = 0. (6.19.1) We obtain here a representation of u(x, t), extending that of Somigliana. First, we consider an elastic solid occupying the entire Euclidean space E 3 and introduce the operators ∞ ϕ = λ(|x − x|)ϕ(x , t) d 3 x , −∞ ∞ Mϕ = µ(|x − x|)ϕ(x , t) d 3 x . (6.19.2) −∞
In E 3 the integration and differentiation is commutative, since lim {λ(|z|), µ(z)} = 0.
(6.19.3)
z→∞
With this (6.19.1) takes the form ∇ ∇ · u + M∇ 2 u + ρf − ρ u¨ = 0. ( + M)∇
(6.19.4)
We introduce the differential operators Xi =
∂ , ∂Xi
T =
∂ , ∂t
X2 = Xi Xi ,
(6.19.5)
and express (6.19.4) as ( + M)X(X · u) + MX2 u + ρf − ρT 2 u = 0.
(6.19.6)
The inner and cross products of this with X gives X·u=−
ρX · f , Q1
X×u=−
ρX × f , Q2
(6.19.7)
where Q1 and Q2 are the wave operators Q1 = ( + 2M)X 2 − ρT 2 ,
Q2 = MX2 − ρT 2 .
(6.19.8)
Upon substituting X · u from (6.19.7) into (6.19.6) we obtain u=ρ 15 Not published before.
+ M)X(X · f) −fQ1 + ( . Q1 Q2
(6.19.9)
6.20 Fundamental Solution
165
If we now set −ρf = Q1 Q2 F
(6.19.10)
u = Q1 F − ( + M)X(X · F).
(6.19.11)
we obtain the representation
These expressions translate to ∂2 ∂2 2 2 −ρf = ( + 2M)∇ − ρ 2 M∇ − ρ 2 F, ∂t ∂t 2 ∂ ∇ ∇ · F. u = ( + 2M)∇ 2 − ρ 2 F − ( + M)∇ ∂t
(6.19.12) (6.19.13)
Thus if we solve (6.19.12) for F, (6.19.13) gives the displacement field.16 We note that this result is valid for the solid extending to infinity in all directions since otherwise (6.19.1), upon carrying differentiation into the integrand, gives expressions (6.19.4) plus a surface term (cf. (6.4.16)). However, the kernels λ and µ being generalized functions with supports that are limited to a few atomic distances, this representation will be valid within the body except in a thin boundary layer near the surfaces. Consequently, the solution obtained by means of (6.9.13) should represent a good approximate solution for bodies of finite extent.
6.20 Fundamental Solution17 The solution of the problem of an elastic solid of infinite extent loaded by a concentrated force is known as the fundamental solution. In the static case, this is called the Kelvin problem. While the dynamic case can be dealt with by the use of a four-dimensional Fourier transform (three space and one time dimension), and equations (6.19.12) and (6.9.13), the inversion of the four folds Fourier transform represents major difficulties. Here we consider only the nonlocal elastostatic case. In this case, by dropping ∂/∂t 2 in (6.19.12) and (6.19.13) and applying the three-dimensional Fourier transform ∞ ϕ(ξ ) = (2π)−3/2 ϕ(x)eiξξ ·x d 3 x, (6.20.1) −∞
we obtain F=−
ρf(ξξ ) µ0 (λ0 + 2µ0 )ξ 4 α(ξξ )
(6.20.2)
and u(ξξ ) = [−(λ0 + 2µ0 )ξ 2 F + (λ0 + µ0 )ξξ (ξξ · F)]α(ξξ ).
(6.20.3)
16 Chirita [1976], in a paper, announced a result similar to these without presenting a derivation. 17 Not published before.
166
6 Nonlocal Linear Elasticity
With the substitution of F (ξξ ) from (6.20.2) into (6.20.3) we obtain (λ0 + µ0 )ξξ (ξξ · f) f (ξξ ) . u(ξξ ) = ρ − µ0 ξ 2 µ0 (λ0 + 2µ0 )ξ 4
(6.20.4)
This expression is independent of α(ξξ ). Moreover, it is identical to the Fourier transform of the Navier equations of classical elasticity. Hence, we conclude that: For the infinite solid the displacement fields of the classical elastostatics are exactly the same as the nonlocal elastostatics. Hence, we can borrow the displacement field from well-known classical solutions, then the constitutive equations of the nonlocal theory give the stress field, i.e., ∞ α(|x − x |)[λ0 ur,r (x )δkl + µ0 uk,l (x ) + µ0 ul,k (x ) d 3 x . (6.20.5) tkl = −∞
For a concentrated force ρf = Pδ(x) (P = constant vector) acting at x = 0, from the classical theory of elasticity we have λ0 + µ0 λ0 + 3µ0 P x(P · x) u(x) = , (6.20.6) + r3 8πµ0 (λ0 + 2µ0 ) λ0 + µ0 r where r 2 = x12 + x22 + x32 .
(6.20.7)
Carrying u(x) into (6.20.5) and using α(|x − x |), (6.20.5) will give the stress field of the nonlocal elasticity in the static case. Nowinski [1990] gave a solution of the static problem via a different elaborate approach, using for α(|x − x |) the atomic lattice model represented by (6.9.21). He obtained only the expression for t33 . He found that the stress concentration at the point of application of a concentrated force predicted by the nonlocal theory is finite.
6.21 Nonlocal Elastic Half-Plane under a Concentrated Force We consider a half-plane x2 < 0 with a concentrated load P on its surface x2 = 0 (Figure 6.21.1). We would like to determine the stress field in the medium. The equations of equilibrium for the static case are of the form
− ασkl n k da + ασkl,k dv = 0, (6.21.1) V
V
where σkl is the Hookean stress given by σkl = λ0 ur,r δkl + µ0 (uk,l + ul,k ).
(6.21.2)
6.21 Nonlocal Elastic Half-Plane
167
x2 = y
P x1 = x
Figure 6.21.1. Half-plane under concentrated loads. Here λ0 and µ0 are the Lamé constants and uk (x) is the displacement vector. If the surface fractions are in equilibrium, the surface integral in (6.21.1) vanishes. Because of the fact that α > 0 within its support, from (6.21.1) it follows that σkl,k = 0. (6.21.3) This through (6.21.2) indicates that the displacement field will be the same as found in classical elasticity. However, the stress will have to be calculated by α(|x − x |)σkl (x ) dv . (6.21.4) tkl = V
For the half-plane the classical elasticity solution is well known: x2y 2P , 2 π (x + y 2 )2 2P xy 2 = . 2 π (x + y 2 )2
σ11 = σ12
σ22 =
y3 2P , 2 π (x + y 2 )2
The influence function α(|x − x|) is selected as |x − x|2 2 1 − , a2 α(|x − x|) = πa 2 0,
(6.21.5)
|x − x| ≤ a, |x − x| > a,
168
6 Nonlocal Linear Elasticity
where a is the lattice parameter. The stress field is then given by 2 tkl = πa 2
(x − x)2 + (y − y)2 1− σkl (x , y ) dx dy , a2
(6.21.6)
where is the domain of integration which consists of either a full circular region with radius a or the remainder of a circular region cut off by the x-axis. Artan [1996] evaluated (6.21.6) by using the Gauss points. He also evaluated tyy (0, y) exactly by carrying out integration in (6.21.6). Here we give only the latter results. I. Normal Stress for y ≤ −a In this case the domain of integration is the inside of a circle of radius a: x 2 + (y − y)2