Plant Solute Transport Edited by ANTHONY YEO Haywards Heath, West Sussex, UK TIM FLOWERS School of Life Sciences University of Sussex, UK
Plant Solute Transport Edited by ANTHONY YEO Haywards Heath, West Sussex, UK TIM FLOWERS School of Life Sciences University of Sussex, UK
C
2007 Blackwell Publishing
Blackwell Publishing editorial offices: Blackwell Publishing Ltd, 9600 Garsington Road, Oxford OX4 2DQ, UK Tel: +44 (0)1865 776868 Blackwell Publishing Professional, 2121 State Avenue, Ames, Iowa 50014-8300, USA Tel: +1 515 292 0140 Blackwell Publishing Asia Pty Ltd, 550 Swanston Street, Carlton, Victoria 3053, Australia Tel: +61 (0)3 8359 1011 The right of the Authors to be identified as the Authors of this Work has been asserted in accordance with the Copyright, Designs and Patents Act 1988. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, except as permitted by the UK Copyright, Designs and Patents Act 1988, without the prior permission of the publisher. First published 2007 by Blackwell Publishing Ltd ISBN: 978-14051-3995-3 Library of Congress Cataloging-in-Publication Data Plant solute transport/edited by Anthony Yeo and Tim Flowers. p. cm. Includes bibliographical references. ISBN-13: 978-1-4051-3995-3 (hardback : alk. paper) ISBN-10: 1-4051-3995-1 (hardback : alk. paper) 1. Plant translocation. II. Flowers, T. J. (Timothy J.) QK871.P53 571.2–dc22
I. Yeo, A. R.
2007 2006027577
A catalogue record for this title is available from the British Library Set in 10/12 pt Times by TechBooks, New Delhi, India Printed and bound in Singapore by Markono Print Media Pvt Ltd The publisher’s policy is to use permanent paper from mills that operate a sustainable forestry policy, and which has been manufactured from pulp processed using acid-free and elementary chlorine-free practices. Furthermore, the publisher ensures that the text paper and cover board used have met acceptable environmental accreditation standards. For further information on Blackwell Publishing, visit our website: www.blackwellpublishing.com
Contents Preface
xiii
Contributors
xvii
1
2
General introduction ANTHONY YEO 1.1 Introduction 1.2 Synopsis 1.3 Concluding remarks Reference Solutes: what are they, where are they and what do they do? TIM FLOWERS 2.1 Solutes: inorganic and organic 2.2 Analysis of inorganic elements 2.2.1 Obtaining material for analysis 2.2.2 Optical methods 2.2.3 Mass spectrometry 2.2.4 X-ray fluorescence 2.2.5 Ion-specific electrodes 2.2.6 Ion chromatography 2.3 Solute concentrations 2.4 Organic compounds 2.5 Range of solutes found in plants 2.6 Localisation 2.6.1 Stereological analysis 2.6.2 Inorganic elements and electron microscopy 2.6.3 Ion-specific microelectrodes 2.6.4 Direct sampling 2.6.5 Use of fluorescent dyes 2.6.6 Flux analysis 2.6.7 Organic compounds 2.7 What do they do? 2.7.1 Vacuoles 2.7.2 Organelles and the cytoplasm 2.7.3 Cell walls 2.7.4 Conclusions References
1 1 3 14 14 15 15 15 15 16 16 17 17 17 17 18 19 19 19 20 21 22 22 23 25 25 25 26 26 26 27
iv 3
4
CONTENTS
The driving forces for water and solute movement TIM FLOWERS and ANTHONY YEO 3.1 Introduction 3.2 Water 3.3 Free energy and the properties of solutions 3.3.1 Free energy and chemical potential 3.3.2 Water potential and water potential gradients 3.3.3 Osmosis and colligative properties 3.4 Cell water relations 3.5 Water movement 3.5.1 Water movement through the soil 3.5.2 Water in cell walls 3.5.3 Water movement across a root (or leaf) 3.5.4 Water movement through the xylem and phloem 3.6 Solute movement 3.6.1 Chemical, electrical and electrochemical potentials and gradients 3.6.2 Diffusion – Fick’s first law 3.6.3 Diffusion potential 3.6.4 Nernst potential 3.6.5 Donnan systems 3.6.6 Goldmann equation 3.7 Coupling of water and solute fluxes References Membrane structure and the study of solute transport across plant membranes MATTHEW GILLIHAM 4.1 Introduction 4.2 Plant membranes 4.2.1 Plant membrane composition 4.2.2 Plant membrane structure 4.3 Studying solute transport across plant membranes 4.4 Transport techniques using intact or semi-intact plant tissue 4.4.1 Plant growth 4.4.1.1 Solution design 4.4.1.2 Using inhibitors 4.4.2 Accumulation and net uptake 4.4.3 Radioactive tracers 4.4.4 Fluorescent solute probes 4.4.5 Electrophysiology 4.4.5.1 Voltage-based measurements (membrane potential and ion concentration) 4.4.5.2 Voltage clamping 4.5 Using isolated membranes for transport studies
29 29 29 31 31 32 33 34 35 38 39 39 40 40 41 41 42 43 43 44 44 45
47 47 47 47 50 51 52 52 52 53 53 54 55 57 58 60 60
CONTENTS
4.5.1 4.5.2
Isolating membranes Assaying transport activities of protoplasts and membrane vesicles 4.6 Using molecular techniques to inform transport studies 4.6.1 Revealing the molecular identity of transporters and testing gene function 4.6.2 Location of transport proteins 4.6.3 Heterologous expression 4.7 Combining techniques (an example of increasing resolution and physiological context) 4.8 Future development 4.9 Conclusions Acknowledgements References
5
Transport across plant membranes FRANS J. MAATHUIS 5.1 Introduction 5.1.1 Plant solutes 5.1.2 Definitions and terminology 5.1.3 Some formalisms 5.2 Passive transport 5.2.1 Diffusion through membranes 5.2.2 Facilitated diffusion through carriers 5.2.3 Transport through ion channels 5.2.3.1 Potassium channels 5.2.3.2 Calcium channels 5.2.3.3 Non-selective ion channels 5.2.3.4 Chloride channels 5.2.4 Transport through water channels 5.3 Primary active transport 5.3.1 Primary proton pumps 5.3.1.1 P-type ATPases 5.3.1.2 V-type ATPases 5.3.1.3 The pyrophosphatase 5.3.2 Primary pumps involved in metal transport 5.3.2.1 P-type Ca2+ pumps 5.3.2.2 Heavy metal ATPases 5.3.3 ABC transporters 5.4 Secondary active transport 5.4.1 Potassium uptake 5.4.2 Nitrate transport 5.4.3 Sodium efflux 5.4.4 Non H+ -coupled secondary transport
v 60 61 63 63 64 65 66 66 67 67 67
75 75 76 76 79 81 81 82 83 84 85 85 85 85 87 87 88 89 90 90 90 91 92 92 93 94 95 95
vi
6
7
CONTENTS
5.5 Concluding remarks References
96 96
Regulation of ion transporters ANNA AMTMANN and MICHAEL R. BLATT 6.1 Introduction 6.2 Physiological situations requiring the regulation of ion transport 6.2.1 Change of cell volume 6.2.2 Nutrient acquisition 6.2.3 Stress responses 6.3 Molecular mechanism of regulation 6.3.1 Transcriptional regulation 6.3.2 Post-translational regulation 6.3.2.1 Autoinhibition 6.3.2.2 14-3-3 proteins 6.3.2.3 Calmodulin 6.3.2.4 Cyclic nucleotides 6.3.2.5 Heteromerisation 6.4 Traffic of ion transporters 6.5 Conclusions and outlook References
99
Intracellular transport: solute transport in chloroplasts, mitochondria, peroxisomes and vacuoles, and between organelles ¨ KATRIN PHILIPPAR and JURGEN SOLL 7.1 Introduction 7.1.1 Research to identify solute transport proteins in plant organelles 7.1.1.1 Benefits of a model plant: Arabidopsis thaliana 7.2 Chloroplasts 7.2.1 The function of plastids 7.2.2 Transport across the outer envelope: general diffusion or regulated channels? 7.2.2.1 A porin in the outer envelope of plastids? 7.2.2.2 OEPs, a family of channels with substrate specificity 7.2.2.3 Outer membrane channels and porins: evolutionary aspects in chloroplasts and mitochondria 7.2.3 Transport across the inner envelope: phosphate translocators, major facilitators and carriers 7.2.3.1 The phosphate translocator family
99 99 99 102 106 107 108 109 109 111 113 114 116 117 120 120
133 133 133 134 136 137 137 138 138
142 142 142
CONTENTS
7.2.3.2 Major-facilitator-mediated transport 7.2.3.3 Carriers in the inner envelope of plastids 7.2.4 Transport across the inner envelope: ABC transporters and ion transport 7.2.4.1 ABC transporters 7.2.4.2 Ion transport 7.2.4.3 Transport of metal ions 7.3 Mitochondria 7.3.1 The function of plant mitochondria 7.3.2 Transport across the outer membrane: the porin VDAC 7.3.3 Transport across the inner membrane: carriers 7.3.3.1 Transporters involved in ATP production 7.3.3.2 Carriers for transport of TCA cycle intermediates 7.3.3.3 Amino acid transport across mitochondrial membranes 7.3.3.4 Carriers involved in β-oxidation of fatty acids 7.3.4 Transport across the inner membrane: ABC transporters and ion channels 7.3.4.1 ABC transporters 7.3.4.2 Ion channels 7.4 Peroxisomes 7.4.1 Function of peroxisomes in plant metabolism 7.4.2 Solute transport across the peroxisomal membrane 7.4.2.1 A porin in the peroxisomal membrane 7.4.2.2 Specific transport proteins in the peroxisomal membrane 7.5 Photorespiration: transport between plastids, mitochondria and peroxisomes 7.6 Vacuoles 7.6.1 Generating a pH gradient across the tonoplast: H+ -ATPase and H+ -pyrophosphatase 7.6.2 Transport of malate and sucrose across the tonoplast 7.6.2.1 Malate 7.6.2.2 Sucrose 7.6.3 Aquaporins and ABC transporter in the tonoplast 7.6.3.1 Aquaporins in the vacuole are tonoplast-intrinsic proteins 7.6.3.2 ABC transporters in the tonoplast 7.6.4 Ion transport 7.6.4.1 Ion channels 7.6.4.2 Calcium, sodium and magnesium uptake involves active transport 7.6.4.3 Transport of transition metals References
vii 144 146 147 147 149 150 153 153 154 156 156 158 159 160 160 160 161 162 163 163 163 165 166 167 168 170 170 171 171 171 172 173 173 175 177 178
viii 8
9
10
CONTENTS
Ion uptake by plant roots ROMOLA J. DAVENPORT 8.1 Introduction 8.2 Soil composition 8.3 Root exploration of the soil 8.4 Physical factors affecting root uptake: depletion zones and Donnan potentials 8.5 Radial transport of solutes across the outer part of the root 8.5.1 The role of apoplastic barriers 8.5.2 Root hairs and cortical cells 8.6 Solute uptake from different root zones 8.7 Transport of solutes to the xylem 8.8 The kinetics of solute uptake into roots 8.8.1 Radioisotopic studies 8.8.2 Other methods 8.8.3 Kinetics of uptake in response to solute availability 8.9 Conclusion References Transport from root to shoot SERGEY SHABALA 9.1 Introduction 9.2 Transport of water 9.2.1 Xylem structure 9.2.2 Physics of water flow and evolutionary aspects of conduit development 9.2.3 Water flow between xylem elements: safety mechanisms 9.2.4 Hydraulics of the sap lift: general overview 9.2.5 Driving force for water movement in the xylem 9.2.6 Controversies and additional mechanisms 9.3 Transport of nutrients 9.3.1 General features of xylem ion loading 9.3.2 Ionic mechanisms of xylem loading 9.3.2.1 Potassium 9.3.2.2 Sodium 9.3.2.3 Anion channels 9.3.2.4 Gating factors 9.3.3 Xylem-sap composition 9.3.4 Factors affecting ion concentration in the xylem 9.3.5 Xylem unloading in leaves References Solute transport in the phloem JEREMY PRITCHARD 10.1 Introduction
193 193 193 194 196 197 197 198 201 203 204 204 207 207 209 209 214 214 214 214 216 217 219 221 222 224 224 225 225 226 227 227 228 229 230 231 235 235
CONTENTS
10.2
Phloem anatomy 10.2.1 Sieve tubes 10.2.1.1 Sieve tubes are anucleate 10.2.1.2 Sieve plate blockage 10.2.2 Plasmodesmata 10.2.2.1 Plasmodesmatal structure 10.2.2.2 Plasmodesmatal selectivity 10.3 Phloem composition 10.3.1 Carbohydrate 10.3.1.1 Sucrose 10.3.1.2 Other carbohydrates 10.3.2 Inorganic ions 10.3.2.1 Variation in sieve element composition 10.3.2.2 K+ /sucrose reciprocity 10.3.3 Nitrogen 10.3.4 mRNA 10.3.4.1 Protein metabolism message 10.3.4.2 Structural genes and cell-wall enzymes 10.3.4.3 Interaction with DNA/RNA 10.3.4.4 Carbohydrate metabolism 10.3.4.5 Redox–oxidative stress 10.3.4.6 Amino acid metabolism 10.3.4.7 Transport 10.3.4.8 Interaction with the environment 10.3.5 Proteins 10.3.5.1 Oxidative stress 10.3.5.2 Defence 10.3.5.3 Calcium and sieve element structure 10.3.5.4 Metabolism 10.3.6 Macromolecular trafficking 10.4 Sieve element water relations 10.4.1 Sieve element water relations 10.4.1.1 Sieve element osmotic pressure 10.4.1.2 Sieve element turgor pressure 10.4.2 Flow in the phloem 10.4.3 Phloem loading 10.4.3.1 Symplastic or apoplastic loading? 10.4.3.2 Transporters facilitating apoplastic loading 10.4.3.3 H+ /ATPase 10.4.4 Phloem unloading 10.4.4.1 Evidence for unloading pathway: root tips 10.4.4.2 Evidence for unloading pathway: developing fruits 10.4.4.3 Evidence for unloading pathway: seed coats
ix 236 236 236 237 238 238 238 240 240 240 240 241 241 242 242 243 244 244 245 245 245 245 245 246 246 246 247 247 247 248 248 249 249 249 250 251 251 254 255 257 257 259 259
x
CONTENTS
10.4.5 Resource partitioning through the phloem Exploitation by other organisms 10.5.1 Micro-organisms and viruses 10.5.2 Sap-feeding insects 10.5.3 Plants 10.5.4 Other organisms 10.6 Conclusions References
260 261 261 261 262 262 262 263
Factors limiting the rate of supply of solutes to the root surface ANTHONY YEO 11.1 Introduction 11.2 Supply of nutrients to the root surface 11.2.1 Absence of the nutrient element in the growth medium in any form 11.2.2 Bioavailability of the element 11.2.3 Movement of nutrients towards roots 11.2.4 Homogeneity or heterogeneity (spatial and temporal) in availability 11.2.5 Losses 11.3 Acquisition and uptake of nutrients by the root 11.3.1 Affinity and capacity of transport processes in the roots 11.3.2 Exploration and exploitation of soil volume by roots 11.4 Acquisition of phosphorus 11.5 Protected cropping systems: hydroponics as an example of ‘ideally’ controlled conditions 11.6 Concluding remarks References
275
10.5
11
12
Mineral deficiency and toxicity ANTHONY YEO 12.1 Introduction 12.1.1 Terminology 12.2 Deficiency and efficiency: iron in alkaline soils 12.2.1 ‘Strategy I’: reduction-dependent iron uptake 12.2.2 ‘Strategy II’: phytosiderophores 12.3 Phosphate uptake in soils that are low in phosphate 12.3.1 Cluster roots and root exudates 12.3.2 Mycorrhizal symbiosis 12.4 Toxicity and tolerance–aluminium in acid soils 12.5 Toxicity and tolerance–essential and non-essential metals 12.5.1 Hyperaccumulation 12.5.2 Ion transport in hyperaccumulators 12.5.3 Phytochelatins 12.5.4 Function of hyperaccumulation
275 276 276 276 278 279 279 280 280 282 284 286 287 287 290 290 291 293 295 296 299 299 300 301 303 304 305 306 308
CONTENTS
13
14
xi
12.6 Concluding remarks References
308 309
Water-limited conditions ANTHONY YEO 13.1 Introduction 13.2 Plant responses to reduced water availability 13.3 Mechanisms to reduce water loss: regulation of stomata and regulation of leaf area 13.3.1 Stomatal regulation 13.3.2 Leaf area regulation 13.3.3 Consequences: interaction with leaf temperature 13.4 Mechanisms to maintain water potential gradients: osmotic adjustment 13.4.1 Water potential of drying soil 13.4.2 Osmotic adjustment 13.4.3 Compatible solutes/osmolytes/osmoprotectants 13.4.4 Water movement from protoplast to apoplast in freezing injury 13.5 Mechanisms to acquire more water: root properties 13.5.1 Constitutive formation of deep roots 13.5.2 Facultative formation of deep roots 13.5.3 Root conductance 13.6 Mechanisms to increase water-use efficiency: C4 and crassulacean acid metabolism (CAM) 13.6.1 C4 photosynthesis 13.6.2 CAM 13.7 Gene regulation 13.8 Concluding remarks References
314
Salinity ANTHONY YEO 14.1 Introduction 14.2 External concentration of salt up to about 50 mM NaCl 14.3 External concentration of salt up to about 100–150 mM NaCl 14.4 External concentration of salt above about 150–200 mM 14.5 ‘Molecular’ tolerance 14.6 Cellular tolerance 14.7 Moving on to a cell in a plant 14.8 Salt glands 14.9 Selectivity at the root 14.9.1 Root selectivity for chloride 14.10 Transport from root to shoot 14.10.1 Transport of chloride to the xylem
314 315 318 318 320 321 322 322 323 324 326 326 326 327 327 328 329 331 334 335 335 340 340 341 343 344 345 346 347 347 348 353 353 356
xii
15
CONTENTS
14.11 Transport from shoot to root 14.12 Leaf cells 14.13 Prospects 14.14 Concluding remarks References
356 357 361 364 365
Desiccation tolerance ANTHONY YEO 15.1 Introduction 15.2 Occurrence of desiccation tolerance 15.3 Desiccation tolerance in seeds 15.3.1 Intracellular physical characteristics 15.3.2 Intracellular de-differentiation 15.3.3 ‘Switching-off’ metabolism 15.3.4 Antioxidant systems 15.3.5 Protective molecules 15.3.6 Amphiphilic molecules 15.3.7 Oleosins 15.3.8 Damage repair 15.4 Vegetative tissues 15.4.1 Gene expression 15.4.2 Physical characteristics 15.4.3 Metabolism and antioxidants 15.4.4 Low-molecular-weight carbohydrates 15.4.5 Hydrins or LEA proteins 15.4.6 Signals 15.4.7 Constraints to the development of desiccation tolerance 15.5 Concluding remarks Acknowledgements References
371
Index The colour plate section appears after page 78
371 372 372 374 374 375 375 376 378 379 379 379 382 382 383 383 385 385 386 388 388 388 391
Preface Plants generate oxygen, consume carbon dioxide and convert the energy of the sun into food. Life on earth, as we know it, could not have developed and cannot exist without them. Human physical needs are serviced by plant products, from using their molecules as pharmaceuticals to using their bodies for timber. The extent of interest in flowers, gardens and landscapes indicates the psychological importance of plants to us. The acquisition and transport of solutes is fundamental to plant processes at all levels of organisation, and underlies their ability to colonise the land. The purpose of this book is to examine solute transport as a subject in its own right and consider it from the molecular to the ecological and agricultural contexts. Plant cells are full of a vast array of solutes, some in very large quantities. Plants expend considerable amounts of energy and resources upon acquiring or synthesising these solutes that are necessary for the plant’s existence. The need for such quantities arises from the way plants grow and the environments in which they grow. Plants increase in size principally through cell expansion: the volume of individual cells increases over time. To achieve this, water must move into the cell. The structure of plants and plant parts, as well as their rigidity and shape, depends largely upon a hydrostatic skeleton whereby the solution within the cell is contained under pressure by a viscoelastic cell wall. Even the leaves of trees wilt without this. Accumulating and retaining water against hydrostatic pressure requires an opposing force, and this is provided by the osmotic effect of accumulated solutes. This is one reason why the concentration of solutes inside the plant must be much greater than that in the external medium. Plants also face a continual battle to acquire water at least as fast as they lose it. In order to grow, plants must obtain carbon dioxide from the air. The stomatal pores that allow this automatically permit water vapour to pass in the opposite direction from the moist leaf to the usually much drier air. Plant cells must be able to replace this water from the soil as well as compete with the atmosphere to retain some of this water in the plant. Once again, the osmotic forces provided by the accumulation of solutes are the plants’ main weapons. Plants have also evolved in a marine environment where the concentration of inorganic ions was considerable. To avoid dehydration, early plant cells also needed to have an equivalent concentration of solutes. Vital processes such as protein synthesis developed at this time and have since been conserved rigidly. This can explain the requirement plant cells retain for elevated and specific concentrations of inorganic ions in their cytoplasm.
xiv
PREFACE
The marine environment provides abundant and fairly continual replacement of nutrient requirements, but this is not true for all soils. Since plants colonised the land, they have needed to forage and apply strategies to seek and mobilise nutrients from the limited quantities available in many field situations. In addition to these inorganic ions, plant cells contain a vast array of solutes, from small molecules up to proteins and nucleic acids. These are components of cellular biochemistry; as materials, intermediates, products and co-factors in pathways and cycles. Solutes are important for the storage and mobilisation of reserves. The co-existence of all these different processes is dependent upon compartmentalisation by membranes within and between organelles (e.g. vacuoles, chloroplasts and mitochondria), and for this a multitude of transport processes of varying specificity and capacity are required. Directly or indirectly, most of these processes are energy-driven. In plants, the primary energy currency is the proton motive force: proton gradients set up by conversion from high-energy chemical bonds and by the photosynthetic and respiratory electron transport chains. Plant solute transport today has to meet these requirements for the uptake, synthesis and movement around the plant of sufficient quantity and quality of solutes for all of these needs. This must be achieved across the range of ecological conditions in which plants grow, ranging from the relatively sufficient conditions provided in agriculture to those severely limited by the availability of water, of nutrients, and those affected by non-optimal temperatures and by mineral toxicity. This book sets out to provide a coherent coverage of solute transport in plants. The first section covers the physical concepts behind the solute and water movement and the roles of solutes in the plant. The second section covers the transport of solutes at the molecular, cellular, tissue and whole-plant levels of organisation; from the nanometre distances across a membrane to the 100 or more metres required to traverse a tall tree. This section includes a discussion of the membranes that provide the compartmentalisation central to living processes and that allow different cells to perform different functions and different processes to go on within the same cell. The methods of measuring solute transport at different levels of organisation are also addressed. The movement of solutes by pumps, carriers and ion channels is discussed, covering movement from within an organelle to movement around the plant. The two long-distance transport systems – the xylem and phloem – and the forces that drive movement in the two systems link the tissue and whole-plant levels of organisation. The final section of the book examines how solute transport has been adapted in plants growing in a range of conditions from carefully tended horticulture to those of environmental stress. The conflicting priorities of ecological and agricultural adaptation are highlighted. Plant Solute Transport aims to provide an in-depth coverage of this substantial topic, from the molecular to the ecological scale. There is a gap, which we seek to fill, between the large general textbook covering all of plant physiology (perhaps including growth and development and/or biochemistry and molecular biology) and the highly detailed multi-author volume addressing one specific area (such as membrane transport). This volume is directed particularly at research workers and
PREFACE
xv
graduate students, but has a wide enough coverage to be of use to third-year students in plant sciences. The up-to-date research is grounded in the underlying physics and chemistry and placed in the context of what solute transport must achieve for plants in both ecological and agricultural contexts. Anthony Yeo Tim Flowers
Contributors Dr. Anna Amtmann Plant Sciences Group. Division of Biochemistry and Molecular Biology, IBLS, University of Glasgow, Glasgow G12 8QQ, UK Professor Michael R. Blatt Plant Sciences Group. Division of Biochemistry and Molecular Biology, IBLS, University of Glasgow, Glasgow G12 8QQ, UK Dr. Romola J Davenport Oxford Institute of Ageing, University of Oxford, Manor Rd, Oxford OX1 3UQ, UK Professor Tim Flowers Department of Biology and Environmental Science, School of Life Sciences, John Maynard Smith Building, University of Sussex, Falmer, Brighton, BN1 9QG, UK, and School of Plant Biology, 35 Stirling Highway, Crawley, Western Australia 6009, Australia Dr. Matthew Gilliham School of Agriculture, Food and Wine, University of Adelaide, PMB 1, Glen Osmond, South Australia, 5064, Australia Dr. Frans J. Maathuis Biology Department, Area 9, University of York, York YO10 5DD, UK Dr. Katrin Philippar Department Biologie I, Botanik, Ludwig-MaximiliansUniversit¨at, Menzingerstr. 67, D-80638 M¨unchen, Germany Dr. Jeremy Pritchard School of Biosciences, The University of Birmingham, Edgbaston, Birmingham, B15 2TT, UK Dr. Sergey Shabala School of Agricultural Science, University of Tasmania, Private Bag 54, Hobart, Tasmania, 7001, Australia Professor Jurgen ¨ Soll Department Biologie I, Botanik, Ludwig-MaximiliansUniversit¨at, Menzingerstr. 67, D-80638 M¨unchen, Germany Dr. Anthony Yeo Department of Biology and Environmental Science, School of Life Sciences, John Maynard Smith Building, University of Sussex, Falmer, Brighton, BN1 9QG, UK and School of Plant Biology, 35 Stirling Highway, Crawley, Western Australia 6009, Australia. ARY current address:
[email protected]
1 General introduction Anthony Yeo
1.1
Introduction
Plant cells are full of solutes, both dissolved inorganic ions and low-molecular-mass organic molecules. The concentration of solutes inside plant cells is higher than that in the growing medium, and it is much higher for the large majority of terrestrial plants. Plants expend considerable amounts of energy and resources upon acquiring or synthesising these solutes, so perhaps the first question to ask is, ‘why do they do it?’ In part the reasons are historical. The salinity of the early oceans was substantially greater than it is today (Knauth, 1998). The conditions in which life evolved are still debated. It is believed that life might have been evolved in situations where freshwater diluted this salinity; however, the great majority of early life arose in the oceans. For simple physical reasons (water flows across their semipermeable membranes influenced by osmotic forces; see Chapter 3), it was necessary for cells to match the water potential of the seas to remain hydrated; so an equivalent concentration of solutes was needed. Some fundamental living processes of cells were laid down during this arcane period – long before life colonised the land. Observation has shown that these processes have been rigidly conserved; for instance the ionic requirements for protein synthesis (see Chapters 3 and 14). The ghost of the past commands the conditions that plants have to maintain in the cytoplasm of their cells today (a hundred or hundreds of mM of solutes). This is even though the concentration of salts in the growing medium may now be of the order of μM and mM, a tiny fraction of that in the present-day or ancient oceans. In part the reasons are physical. The first challenge of life on land was to remain hydrated. As plants evolved from wetlands to dry land, the availability of water became less. Retaining water against the non-osmotic components of water potential became a priority for the first time. The soil was periodically dry, and the cells of plant roots had to retain water against the water potential of the drying soil. In addition to this, the leaves of plants were in a medium that was hardly ever saturated with water, that is the air. The moist surfaces of cells lost water to the demands of the unsaturated air – because of the vapour pressure difference. This has been the nowin situation of plant life on land. The need to acquire atmospheric carbon dioxide for photosynthetic carbon fixation meant that the cells could not be permanently waterproofed – letting in carbon dioxide meant letting out water. Cells not only had to obtain their water from drying soil, but also had to compete with the voracious demands of transpiration – some 98% of water used (see Chapter 3) – and for this they had to depend upon their own osmotic pressure.
2
PLANT SOLUTE TRANSPORT
In part the reasons are structural. Without enough water, plants and even the leaves of trees wilt. Plants still rely largely on a hydrostatic skeleton maintained by turgor pressure; that is the positive hydrostatic pressure that the cell contents exert upon the surrounding structural cell walls (see Chapter 3). Cells use the osmotic component of water potential (hence the dissolved solutes) to build the turgor pressure. Without this, leaves (or large parts of the plant in the absence of the structural thickening found in woody stems) become flaccid. Such leaves are then unable to fulfil the needs of photosynthesis and may be irreversibly damaged. The large majority of plant growth is by cell expansion. In contrast with animals, mature cells of plants contain a large central vacuole (which may be 90% or more of the volume). This is the principal way in which plants generate size, be it to get up into the light or down into the wet soil, or to expand leaves and ramify roots to capture carbon dioxide, water and nutrients. A continual increase on the quantity of solutes is needed to sustain the concentration within the growing cells, without this the turgor pressure would decrease and there would be no growth. For all these reasons, it is a fundamental requirement for survival that plants fill their cells with solutes, whether this is in the form of inorganic ions concentrated from the growing medium or with organic solutes synthesised from sources (of principally: carbon, nitrogen, phosphorus, oxygen and hydrogen) in the atmosphere and soil. Plants need both the major inorganic ions (for instance, potassium, magnesium and nitrates) and the numerous ions that serve the role of specific ‘micronutrients’. On land these resources had to be found from an environment in which they could become rapidly depleted – in contrast to the sea, where, even at low concentrations, there was normally continual replacement. Nowadays, ‘fertigation’ and nutrient film techniques are common in commercial horticulture to prevent such depletion. In the soil, plants must often forage for the materials they need. Overall the flows of water and solutes are locked together in a dance of physical laws. Evapotranspiration causes a mass flow of water through the soil-plant-atmosphere system and the accumulation of salts drives localised flow of water which brings with it dissolved salts. It takes two to tango. The solutes of plant cells and their roles are diverse. Quantitatively, the largest components are dissolved inorganic ions and low-molecular-mass organic molecules. But the term solute also includes compounds of greater molecular mass as components and products of biosynthetic and catabolic pathways and cycles, up to and including soluble proteins and nucleic acids. Not all soluble species always exist in, or are always transported in, solution. Soluble inorganic ions must often be transported anhydrously across the membrane bilayer by protein carriers. Also, there are species that are not soluble in water but are nonetheless transported throughout the plant; for instance insoluble proteins and viral particles. The transport of solutes occurs over a large range of scale, some 10 orders of magnitude, from the order of 10 nm to cross a cell membrane to the order of 100 metres to ascend the tallest tree. The nature of the events and driving forces that underlie transport over such differences in scale are extremely different for the same solute. A potassium ion carried to the top of a tree in the xylem is in solution in water,
GENERAL INTRODUCTION
3
but a potassium ion being transported across a membrane by a carrier is not in solution but is bound reversibly to a transport protein. Movement up the xylem of a tall tree is by a mass flow of solution driven largely by the evaporation of water at the leaf surface, while accumulation across a membrane is driven either directly or indirectly by energy derived from a biochemical process. Membranes provide the compartmentalisation that is central to living processes; allowing different cells to perform different functions and allowing different processes to go on within the same cell. The concentrations of soluble metabolic intermediates of the citric acid cycle within the mitochondrion can be made relatively independent of the concentrations of the same solutes in the cell as a whole. This allows the same solute to be used for different purposes in different parts of the same cell. Extreme examples are the vacuolar compartmentalisation of malate in CAM plants (see Chapter 13) and of salts in halophytes (see Chapter 14); in both cases permitting the retention of concentrations that would destroy the cytoplasm. More generally, compartmentalisation within membrane-bound compartments provides efficiency, allowing high concentrations to exist in one place without the need for the enormous quantities that would be needed to provide the same concentration throughout the cell. The compartmentalisation of protons is universal in plant cells, with pumping out of the cytoplasm both across the plasma membrane to the outside and across the tonoplast into the vacuole. This not only provides the neutral-toalkaline pH needed in the cytoplasm, but the electrochemical potential gradient of protons. In plant cells, it is this proton motive force (PMF) that is used both to store and couple the energy derived from biochemical processes (ATPases and pyrophosphatases, the photosynthetic and respiratory electron transport chains) with the active transport of other solutes.
1.2
Synopsis
There is a wide range of inorganic and organic solutes in plants. Chapter 2 is an introduction to methods for their extraction and analysis. Inorganic elements can be measured by optical properties (by flame emission and atomic absorption spectroscopy), mass spectroscopy, X-ray fluorescence, with ion-specific electrodes, and by ion chromatography. Analysis of organic solutes is usually achieved by chromatographic separation, often in conjunction with mass spectroscopy and nuclear magnetic resonance. Intracellular localisation can be achieved either via transmission or scanning electron microscopy preceded by precipitation, freezing or freezesubstitution. Ion-specific intracellular electrodes can also be used, as can direct sampling using a modified pressure probe. Individual ions can be monitored in cells loaded with fluorescent probes, and tracer fluxes can be interpreted using analysis of compartmental models. Chapter 2 also introduces the roles of solutes in the vacuole, cytoplasm, organelles and cell walls. Chapter 3 begins by describing the properties of water that are important to its behaviour in biological systems: the hydrogen-bonding that confers structure and order, latent heat, thermal capacity, tensile strength, surface free energy (tension) and
4
PLANT SOLUTE TRANSPORT
incompressibility. The large dielectric constant gives water its solvent properties, its ability to perform charge shielding and provide hydration shells, which link to its roles in maintaining the higher order structure of macromolecules. It is difficult to understand how plants acquire and transport solutes without understanding the physical bases of ion and water movement. What are the driving forces? Which way do ions and water ‘want’ to go? How do plants move and accumulate solutes against physical and chemical gradients? Chapter 3 continues with a consideration of Gibbs free energy and chemical potential, water potential and water potential gradients, osmosis and other colligative properties. It includes the derivation of equations for water movement in cells and in the soil–plant–atmosphere system (resistances and the Ohm’s law analogy), and of how surface tension develops negative hydrostatic pressures in drying soils and cell walls. The chapter then moves on to solute movement; diffusion and Fick’s law, and to permeabilities and fluxes. The contribution of electrical charge is explored in the derivation of the Nernst equation, Donnan systems and the Goldman equation. Finally, irreversible thermodynamics is introduced as it applies to the analysis of coupled flows of solutes and solvents. With this background, the subsequent section of chapters (4 to 10) looks at how solutes are moved at individual membranes and, on an increasingly integrative scale, within and between cells and around the plant, both up in the xylem and down in the phloem. Chapter 4 considers the structure and composition of plant membranes – of which there are about 20 types, all comprised of lipids, proteins and carbohydrates in the approximate ratio of 40:40:20. The amphiphatic nature (both hydrophobic and hydrophilic) of lipids underlies the formation of bilayer membranes. These have little intrinsic solute permeability. This is conferred in biological membranes by embedded transporter proteins mediating either active or passive movement and providing varying degrees of regulation. The overall structure of membranes is currently considered to consist of lipid-ordered microdomains, with rather less freedom of movement in the plane of the membrane that was inherent in the first fluid mosaic model. The transport proteins are often multimeric and distributed in membranes in clusters. Techniques for studying solute transport in membranes are discussed next beginning with those applicable to intact (or semi-intact) tissues and moving on to adaptation of these techniques for use with isolated membranes. There is an emphasis on design and composition of experimental solutions, particularly their osmolarity, and on consideration of unstirred layers, and the difference between the study of net transport and unidirectional fluxes. Methods available include inhibitor studies, radioactive tracers, fluorescent probes and electrophysiology – the last including multi-barrelled electrodes. Individual membrane types can be isolated via protoplasts, and sometimes by direct mechanical means, separated by differential centrifugation and identified by marker analysis. Aqueous polymer two-phase isolation provides information regarding sidedness. Analysis can be performed on vesicles or tiny pieces of a membrane attached to a micro-electrode. Techniques such as fluorescence microscopy and patch-clamping can yield considerable spatial
GENERAL INTRODUCTION
5
and temporal resolution, enabling the detection of the activities of single ion channels. Molecular techniques now allow the in silico characterisation of the possible function of membrane proteins where there is sufficient information on available databases. Forward and reverse genetic screens can be used to endeavour to relate gene to function, as can the use of over-expression and expression in heterologous systems (generally in yeasts or in Xenopus laevis oocytes). The location of proteins within the plant and cell can sometimes be determined by expression using reporter gene constructs. For all techniques of investigations there is a compromise between resolution and invasiveness (or distance from physiological reality). The importance of confirming a result obtained with one technique using a different approach, cannot be overstated. The details of transport across membranes is considered for simple inorganic solutes, anions and cations (see Chapter 5). Any membrane protein involved in cross-membrane movement of substrates is defined as a transporter. Transporters can be classified as to whether the event they mediate is active or passive, and if it is active, whether it is a primary process or a secondary one utilising energy already stored in proton gradients. Transporters may also be classified as pumps, ion channels, or carriers – the last includes the provision of passive transport at higher selectivity but lower capacity than ion channels. A further form of classification is that of uniport, symport and antiport. All these terms will be met in different combinations in the literature. Broadly speaking, primary, ATP-driven, pumps set up proton gradients to drive secondary transport. Primary pumps are also directly involved in the transport of calcium and heavy and transition metals. Secondary transport in plants is generally coupled to proton gradients, and participates in the uptake and movement of hundreds, if not thousands, of different substrates. Finally, it is the ion channels that are almost exclusively responsible for passive transport. They mediate only passive transport and are either open or closed, known as gating, which may be regulated by voltage, ligands, or may be mechano-sensitive (e.g. stretch-activated). In addition, there is a selectivity filter that operates on the basis of physical size and charge properties. Channels may be inward- or outward-rectifying according to whether they are permitting passage into or out of the cell. The transport rate of channels may be millions per second. Water movement across membranes is always passive and directed by the gradient in water potential. Water may cross membranes via their intrinsic permeability to water and also through proteinaceous pores: aquaporins. The selectivity of aquaporins is related to size and they have very high capacity (over 109 per second). Primary pumps use chemical, redox or light energy to move solutes against their electrochemical gradient. ATPases have low capacity (around 100 per second), and consequently large numbers of these proteins are required. There are also primary pumps for calcium and some other metals, such as for copper in chloroplasts. Transport rates of primary pumps are hundreds per second. Secondary active transport pumps solutes against their free energy gradient, but the energy derives from coupling to the proton gradient set up by the primary pump(s) and can be either
6
PLANT SOLUTE TRANSPORT
symport (in the same direction as protons) or antiport (in opposite directions). These are often termed carriers, as they are neither primary pumps nor channels. Such carriers have higher selectivity than channels but lower capacity (hundreds or thousands per second). Major nutrients, such as potassium, are taken up through channels at high external concentrations, and by active processes that are induced upon potassium starvation, at low external concentrations. Plants have many transport processes that need to operate in different ways to address different environmental conditions and developmental stages, as well as differences between different cells and tissues. The processes require regulation (Chapter 6), which occurs at several levels, e.g. gene expression, mRNA degradation, protein turn-over, protein activity and membrane trafficking. Regulation involves both positive and negative feedback, and the transporters themselves are both components and targets of signalling pathways (e.g. calcium, auxin and ABA). Chapter 6 considers examples of the regulation of transporters in adaptive processes, the molecular mechanisms underlying transcriptional and post-transcriptional regulation, and the regulation of transporters by membrane trafficking. Regulation of solute transport is required to effect changes in cell volume, both for sustained growth and for the cyclical changes in volume needed in stomatal guard cells for control of stomatal aperture. The pathways leading to co-ordinated regulation of potassium and chloride channels during stomatal closure are examined. High-affinity uptake of nutrients is often induced by deficiency situations, since there may be less costly pathways of uptake when the same nutrient is in abundant supply. Some transporters are induced by a change from high supply to low supply, and some transporters are induced by a change from nil to low supply. Fine-tuning may be via differential regulation of apparently functionally redundant isoforms. Nutrient transport is regulated not only by availability but by the nutrient status of the plant. Transport is also linked to carbon status, and thus is controlled indirectly by environmental factors that affect photosynthesis. Response to many environmental stresses is dependent upon regulation. For example, ‘unwanted’ entry of sodium into the root cells in saline conditions will lead to membrane depolarisation, which will open depolarisation-activated calcium channels leading to a rise in cytoplasmic calcium activity, which is in turn a signal to enhance the activity of the sodium-proton antiport carrier at the plasma membrane, which pumps sodium out again. The limited information regarding the molecular components of the transcriptional regulation of nutrient transporters are summarised. Post-transcriptional regulation involves auto-inhibitory domains, protein–protein interactions (e.g. with protein kinases, calmodulins and 14-3-3 proteins), and ligand binding (e.g. ion channel gating by cyclic nucleotides). The 14-3-3 proteins are highly conserved and regulate a wide range of targets including a number of ion channels. Calmodulins are small calcium-binding proteins that are able to translate intracellular calcium signals into a variety of cellular responses. Cyclic nucleotides are widely used in signal transduction, and evidence is building that higher plants use cGMP as a secondary messenger. Finally, the role of membrane trafficking is reviewed. SNARE (soluble NSF attachment receptor) proteins have been identified in higher plants; they are a group of membrane proteins that are highly conserved
GENERAL INTRODUCTION
7
in eukaryotes and are at the centre of the molecular machinery involved in vesicle trafficking and membrane fusion. Plant processes involve a complex traffic between organelles, and between organelles and the cytoplasm. Organelles have their own transport systems and these are integrated with cellular metabolism (Chapter 7). Chloroplasts are part of the plastid family that includes storage plastids and amyloplasts. They contain the light-harvesting centre and the photosynthetic electron transport chain. Chloroplasts have distinct outer and inner membranes, plus the thylakoid system. The outer envelope (OE) has a range of proteins (OEPs) which are selective channels for solutes essential to plastid function. The inner membrane contains the phosphate translocator family and members of the major facilitator superfamily. There are transporters for di- and tri-carboxylates and carbohydrates, for ATP/ADP exchange, and for a range of specific ions (including nitrate and sulphate which are reduced in the plastid) and there are also symporters for transition metals. Mitochondria are semi-autonomous organelles with a smooth outer membrane and a much-folded inner membrane, which is the energy-transducing membrane. The compartments are the intermembrane space and the protein-rich core, or matrix. One key role of mitochondria is the synthesis of ATP formed by oxidative phosphorylation – the PMF generated by the respiratory chain drives the ATP synthase complex. The outer membrane contains the VDAC porin which is freely permeable to solutes of up to 4–5 kDa: specific permeability barriers reside with the inner membrane. Carriers on the inner membrane include the phosphate carrier, the ATP/ADP carrier, and carriers for intermediates of the tricarboxylic acid cycle, amino acids, and a carrier for succinate/fumarate (which links β-oxidation in the peroxisomes with the TCA cycle). There are also ion channels for potassium and calcium. Peroxisomes are bounded by a single membrane. They are involved in βoxidation and are part of the photorespiratory cycle; they also generate reactive oxygen species and contain appropriate protective mechanisms. Glyoxisomes convert lipid reserves to sucrose. The peroxisome family has a ‘specific porin’ as well as transporter proteins including the peroxisomal ATP/ADP carrier. The photorespiratory pathway is split between the chloroplast, mitochondrion and peroxisome. Vacuoles are multifunctional and are involved in the storage of different metabolites, quantitatively extreme examples being malate (in CAM) and sucrose (in storage tissue). The vacuole is the largest organelle and usually comprises the major volume fraction: it is bounded by a single membrane, the tonoplast. The tonoplast contains proton ATPases and pyrophosphatases which together generate a PMF. A major facilitator imports malate. Tonoplast intrinsic proteins (TIPs, aquaporins) mediate water flow. There are ABC transporters for the accumulation of secondary metabolites and xenobiotics. There are a range of ion channels and carriers mediating the movement of solutes needed for cell expansion, guard cell movement, and compartmentalisation (such as of sodium). Chapter 8 addresses the main factors affecting and controlling the uptake of charged solutes by plants, from the soil solution to the transpiration stream. It
8
PLANT SOLUTE TRANSPORT
describes root anatomical and physiological responses to the availability of nutrients in the soil and the general processes involved in the transport of solutes into and out of root cells. The Casparian strip blocks apoplastic radial movement of water and solutes when it develops, and in many species this barrier is backed up with an hypodermis. Some leakage may occur, particularly when lateral roots are initiated. There is also a symplastic continuity from cell to cell via plasmodesmata. Root hairs are modified epidermal cells that increase surface area and root radius, and appear to be most important in the acquisition of immobile nutrients. In some instances, epidermal cells are modified as transfer cells. The cells of the cortex may be involved in nutrient uptake depending upon whether the epidermal cells can satisfy the needs of the plant and upon whether they have already depleted the concentration to which the cortex is exposed. The tissue and cell expression pattern of high-affinity transporters varies between different nutrients. Cortical cells may also be involved in re-uptake of nutrients that have been effluxed by cells in outer layers of the root. Uptake varies along the length of the root, being minimal at the apex (which is phloem-supplied). Root hairs are usually concentrated behind the apex. Uptake of mobile nutrients may occur along the root but uptake of immobile nutrients is mainly near the tip. Uptake of calcium occurs in young roots only where an apoplastic radial pathway remains available. Xylem loading varies longitudinally, clearly affected by the stage of xylem development. Xylem loading is independent of initial uptake, at least for some solutes. There is evidence that shoot requirements can dictate root uptake and translocation rates. Net uptake is the sum of influx and efflux, and the latter can be a very high percentage of the former. Analysis of tracer uptake is usually related to a three-compartment model: (1) the cytosol of cells of the outer root, (2) vacuoles and (3) transport to the shoot. After the initial uptake, filling of vacuoles and transport to the shoot are in parallel. The kinetics of tracer uptake have been interpreted as dual isotherms since the 1960s. This is now considered to represent the co-existence of low-capacity-high-affinity systems at low external concentration, and high-capacity-low-affinity systems at higher external concentration. These may be either channels or carriers. The xylem has evolved for long-distance upward transport of water and solutes (Chapter 9). The xylem has a large capacity to carry the replacement of transpirational losses and is a leak-proofed conduit with the mechanical strength to avoid collapse under negative hydrostatic pressure. Xylem comprises vessels and tracheids (collectively, tracheary elements, the conducting pathway), fibres and parenchyma (the only living cells in the xylem). The xylem parenchyma cells are densely cytoplasmic with ER, ribososmes and mitochondria. Vessel elements are 5–500 μm (typically 40–80 μm) in diameter and joined end-to-end via perforation plates into vessels that may be several metres long. Tracheids are 10–25 μm and are interconnected by pit fields at their overlapping, tapered ends. The classic interpretation of water movement in the xylem is the cohesion-tension theory. There have also been additional mechanisms suggested which include: mucopolysaccharides to help maintain water flow, osmotic water lifting (root pressure), ionic control of xylem conductance and an electrical driving force.
GENERAL INTRODUCTION
9
The concentration of major solutes in the xylem is mostly in the mM range though these concentrations are variable between species and may depend upon shoot demand. The osmotic pressure of the xylem is usually not considerable. Sampling of the xylem is difficult because most methods are very invasive, though there has recently been use of xylem-feeding insects. Loading of potassium into the xylem is probably via depolarisation-activated outward-rectifying potassium channels. There are three types of anion channels involved in xylem loading, and this is mostly a passive process. Sodium loading could be via a non-selective channel but probably via sodium-proton antiport. Unloading of solutes from the xylem into the leaf is plausibly under hormonal control, and a complex network of veins exists to reduce damage due to excessive concentration of xylem contents when water is withdrawn. Proton ATPases are probably the driving force behind both active and passive unloading, with co-transport processes important, for example, for sugars. The other long-distance transport system in plants is the phloem (Chapter 10). The transport pathway consists of sieve tubes which are an end-to-end arrangement of sieve elements (each 40–500 μm by 5–50 μm) joined at a sieve plate. The plate is perforated by pores and is the major resistance to flow. The sieve tube contains mitochondria but is anucleate. Sieve tubes may live many years and have protection against oxidative damage. The other main component of the phloem is the companion cells which are connected to the sieve tubes via plasmodesmata, through which all proteins destined for the anucleate sieve element must pass from the companion cell. Analysis of sieve tube contents has been made mostly using phloem-feeding insects or by bark incision. The major carbohydrate in most species is sucrose, at hundreds of mM, though in some species the major transported carbohydrate differs; for example, sorbitol, raffinose or mannitol. Potassium and sucrose are the major osmotica and there is a reciprocity between them, maintaining turgor pressure with varying carbon supply. Phloem transports many other nutrients and, recently, the implications of the transport of mRNA and proteins is complementing and revising the understanding of the phloem. Over 200 proteins have been identified, although sieve elements are unable to synthesise proteins themselves. Osmotic pressure in sieve tubes at ground level is generally 1–2 MPa. Phloem is loaded at sources (sites where there is synthesis, as in photosynthesis, or else breakdown of storage compounds) and solutes are removed at sinks (where contents are diluted, metabolised, or stored elsewhere). Turgor pressure differences between sources and sinks underlie the pressure flow hypothesis of bulk movement in the phloem. Solutes move into the sieve element from the companion cell. Entry of solutes into the companion cell can take one of the two routes, apoplastic or symplastic. Much evidence favours the former. Sucrose is loaded by a proton co-transport carrier, powered by the PMF set up by the proton ATPase. Loading of potassium into the sieve element-companion cell complex is important both in the transport of potassium in the phloem and in the regulation of the loading process itself. Aquaporins are also present, as are transporters for the loading of many other substances. Unloading may be by either symplastic or apoplastic routes; this differs with species, organ, and stage of development.
10
PLANT SOLUTE TRANSPORT
In the third section of the book we set out to put this information in an ecological and agricultural context (Chapters 11–15). We describe the factors, other than the transport processes themselves, which limit the supply of nutrients to plants in field conditions and even when growing in carefully tended artificial environments. Next, we look at deficiency and toxicity; some of the ways in which plants have evolved to cope with the ‘not enough’ and ‘too much’ of elements and minerals in their growth environment. We then go on to look at how the use of solutes, both in quantity and quality, has been adapted to more extreme environments: the demands of hot, dry deserts, freezing mountains and saline marshes. All of these entail dealing (by avoidance or tolerance) with some form of externally imposed dehydration. There is also a crucial stage in the life cycle of most plants, the internally controlled dehydration concomitant with seed formation. This is true desiccation tolerance and, while this is common place during reproduction, it is very rare in the vegetative tissues of vascular plants. Many factors, in addition to the properties of the transport processes themselves, affect the rate of uptake of nutrients by plants (Chapter 11). Plants are able to take up nutrients from concentrations that are very low in comparison with those in the soil solution, certainly in fertile soils; except in the case of phosphorus which is commonly at limiting concentrations. Although present, nutrients are not always available: many processes affect the supply of nutrients from the bulk (soil) solution to uptake sites on the roots of plants. These include bioavailability and mobility (the rate of diffusion is impeded by absorption on, and chemical interaction with, the soil). Mass flow of soil solution provides a large-capacity route of nutrient supply, but the contribution of bulk flow to nutrient supply decreases with the decrease in soil water content. There will always be boundary (unstirred) layers around the root in which movement is principally by diffusion. Whenever the flux density of uptake exceeds the flux density of supply, there will be depletion zones around the root, greater than the unstirred layer, across which nutrients must also diffuse. Since diffusion becomes less effective as the distance increases, such supply is commonly limiting, and in many situations the rate of transfer across boundary and depletion zones limits the rate of uptake by the plant. Distribution of nutrients in the soil is also heterogeneous in both space and time, and interception of nutrients also involves roots exploring and exploiting new volumes of soil. Uptake of nutrients depends on both affinity and capacity (flux density) of transport processes. High affinity transporters may provide enough capacity to avoid deficiency of major nutrients and sufficiency of trace nutrients, but are not able to supply the quantitative needs of the plant to support rapid growth. A spectrum of transport processes exists with lower affinity, higher capacity alternatives providing the uptake at higher external concentrations. Concentrations of major nutrients in the xylem are generally in the mM range, and external concentrations in the same range are generally needed to support maximal growth, even in well-mixed solutions, even though K m values for high-affinity transporters are often in the μM range. Maintaining optimal growth in horticulture increasingly relies upon the controlled supply of nutrient solution to the plant in hydroponics, which has many advantages as well as
GENERAL INTRODUCTION
11
some disadvantages. Phosphorus stands out as the major nutrient that is commonly limiting to plant growth in field situations, mainly due to low bioavailability rather than chemical deficiency. A total of sixteen elements are essential to the growth of all plants, and a further four have been demonstrated to be essential in some species (Chapter 12). Plants have evolved mechanisms to maximise uptake of minerals that are in limiting supply. The two strategies for the acquisition of iron in neutral and alkaline soils, where iron is present in quantity but unavailable, are discussed. Plant responses centre either on reduction of ferric to ferrous iron in the soil or on chelation of ferric iron, uptake and subsequent reduction. Another example concerns the acquisition of phosphate, which also includes alteration of conditions in the soil as well as the development of cluster roots and symbiotic associations. Even ‘essential’ elements may be present at external concentrations that can elicit uptake to toxic internal concentrations. This is most widespread for aluminium and manganese in acidic soil. Aluminium is used as an example of how plants can detoxify metals in the soil and tolerate them in the plant. The process commonly involved is chelation, either pre-emptively in the soil by secreting exudates, or within the plant by using chelates combined with compartmentalisation. Toxicity also arises from non-essential elements, particularly transition and heavy metals. Although locally significant, these are rare events both geologically and anthropogenically. Because of this, there will have been little selection pressure to develop specific metal detoxification systems and such tolerance as exists is thought to have arisen from serendipitous recruitment of existing processes (the phytochelatins). A group of plants known as hyperaccumulators achieve enormous concentrations of metals in their tissues. Although phytochelatins, which may have evolved to provide homeostasis for essential metals, can cope with low-level chronic exposure, the hyperaccumulators function by compartmentalisation of metals in the vacuole. There is evidence that high concentrations of metals in the leaves can deter herbivory and this has been advanced as an evolutionary explanation for their extraordinary metal contents. Water availability (Chapter 13) is a major factor in the zonation and distribution of plants, with nearly half of all land being classified as dry land. Terminology around avoidance and tolerance is confusing and difficult, but a three-stage concept of drought has a clear mechanistic and physiological basis. Essentially, these stages are (I) water status can be maintained even with stomata open, (II) stomatal control of water status as water availability decreases, and (III) inability to control water status even with stomata closed. The model also helps clarify the blurred distinction between the agricultural and ecological agendas when it comes to coping with drought: these agendas are often in opposition. Ecological success is linked with survival to complete the life cycle, even if this means slowing down or shutting down as water availability decreases, including pre-emptive adaptations to reduce water usage. Agricultural success is concerned with using as much water as available, and maintaining photosynthesis under drought, in order to produce maximum yield. Plants respond to water deficit in many ways ranging from rapid regulation of stomatal conductance to constitutive anatomical modifications seen in desert species.
12
PLANT SOLUTE TRANSPORT
Reduction in stomatal conductance and leaf area will not only reduce water loss, and conserve soil water, but also will reduce growth and yield. Transpiration is also central to heat dissipation in hot climates, and there are thermal considerations linked intimately with water conservation. Solute accumulation is most often considered in relation to osmotic adjustment. Although osmotic adjustment is clearly important in ecological survival, its role in improving yield in agricultural contexts has been severely challenged. Solutes may also be important as compatible solutes, in drought as in any situation that leads towards reduced hydration, though demonstration of a physiological role requires that compartmentalisation be sufficient. Solute transport underpins the photosynthetic adaptations of CAM and C 4 photosynthesis through the storage and transport of fixed carbon as malate. Both provide substantial increase in water use efficiency, and C 4 photosynthesis is associated with high productivity. Water deficit has been shown to affect the expression of numerous genes. Significantly, the way in which deficit is applied accounts for most of the differences in expression. This underlines the essentiality of applying treatments that are physiologically relevant. Commonly-affected genes were generally involved in downregulation of growth, again emphasising the difference between agricultural objectives and what plants ‘naturally tend to do’. Salinity (Chapter 14) is unusual amongst stresses in that the adapted native flora is not particularly stressed – salinity stress is mainly an agricultural event. Excess salt uptake damages plants in the long term when salt accumulates in the cytoplasm or cell walls, particularly in leaves that are at the end of the line in the transpiration stream. Even halophytes ‘exclude’ most (perhaps 90%) of the salt in the medium, but are well able to manage the remainder. Species that are more salt-sensitive rely on limiting salt uptake and require near-perfect exclusion, close to 98%; this is both very expensive in terms of active extrusion and leaves many questions about achieving osmotic adjustment unanswered. Exclusion is a viable option only at very low external concentrations, and halophytes optimise the regulation of salt transport to the shoot rather than depending on exclusion. However, variation in salt tolerance in crops is usually associated with reduced salt uptake and so is diametrically opposed to the mechanisms that confer salt tolerance in halophytes. Non-selective cation channels, high affinity potassium transporters, and LCT1 have emerged as the potential pathways for sodium entry. In non-halophytes, this (largely unwanted) sodium entry is opposed almost entirely by active extrusion. Despite the damaging consequences, sodium is, in most scenarios, moved actively into the xylem by proton antiport. This is perhaps demanded by the needs of root ion homeostasis. A range of ‘scavenging’ processes (reabsorption and retranslocation) exist to recover excess salt uptake, but are of limited capacity; large capacity would depend on the ability to actively efflux the recovered sodium in situations where efflux is already unable to limit net uptake. Compartmentalisation of salt in the vacuole, together with synthesis and localisation of a compatible solute in the cytoplasm, is central to the tolerance seen in halophytes. Compartmentalisation depends upon minimising leakage across the tonoplast, rather than continually pumping sodium back in.
GENERAL INTRODUCTION
13
Overexpression of sodium-proton antiporters has been reported to increase the salt tolerance of some species, but the evidence is confusing and equivocal. The ion relations cannot be separated from the response to osmotic shock (an artefact of some experimental designs) and further limitations in analyses and experiments compromise interpretation. Nevertheless, there is, theoretically, potential to enhance the tolerance of the more tolerant species by manipulating their ion transport. In this scenario, halophytes will be a source of expertise on how to coordinate ion transport, rather than a source of cherry-picked genes. There is also some potential for minimising sodium influx pathways at the lower end of the salinity spectrum, where osmotic stress is not an issue. The majority of crop species lie, however, in the middle ground, where exclusion-based tolerance takes them further away from the successful halophytes, and this poses a dilemma in plant breeding. The tolerance of desiccation (Chapter 15) is common in the development of seeds and of pollen, but is rare in the vegetative tissues of vascular plants. Desiccation differs from water deficit in a qualitative manner; it means the absence of cytoplasmic water. Water is no longer present to shield charges and the surfaces of macromolecules, and the hydrophobic effect no longer exists; the physical chemistry of the cell is entirely different. Tolerance of desiccation also implies tolerance of the metabolic disruption entailed during de- and re-hydration. Tolerance in orthodox seeds requires tolerance of mechanical damage (shrinkage), metabolic damage, of the desiccated state itself and of rehydration. It is a slow and progressive process requiring the programmed and pre-emptive shut down of the cellular machinery. This depends in a co-ordinated way upon intracellular physical characteristics, de-differentiation of the cell, switching off metabolism, effective antioxidant systems, development of protective molecules (low molecular weight carbohydrates and LEA proteins that can preserve the cytoplasm in the desiccated state), oleosins to surround lipid bodies, and mechanisms for repairing damage. Protective molecules function in water-replacement or in glass-formation (the vitrified state). The failure of recalcitrant seeds to develop desiccation tolerance can be due to a deficit in any one of these mechanisms, in overall co-ordination, or simply be prevented by anatomy. Vegetative tolerance in vascular plants is exemplified in the resurrection plants. Tolerance to desiccation is developed slowly, as in seeds, and so differs from the desiccation tolerance of bryophytes, which is constitutive, and can be moved in and out of quite rapidly. Vegetative desiccation tolerance depends, as in seed development, on physical characteristics that permit shrinkage, on metabolic shut-down and antioxidants, and on solutes, including LEA proteins, that can act in water replacement and vitrification. Desiccation tolerance in both seeds and vascular plants is slow, coordinated and pre-emptive. Competitive advantage rests with the predictability that shutting down is ‘worthwhile’. Whilst this is clear for orthodox seeds, it may limit the advantage of vegetative desiccation tolerance to rare niches. This may help explain the rarity of desiccation tolerance in vascular plants. It may also be the case that few species have the mechanical ability to shrink. Another limitation is how roots dehydrate without damage when in contact with the soil matrix, and this has been little investigated.
14
1.3
PLANT SOLUTE TRANSPORT
Concluding remarks
Throughout the book we attempt to link the increasing knowledge of cellular and molecular bases of solute and water movement with the roles that these fulfil in the whole plant under both ideal and stressful conditions – and show how this is dictated by the physical laws that govern solute and water movement. A great deal of plant physiology, indeed the raison d’ˆetre of much research, is concerned with improving plant performance in situations in which they are, in some way or another, ‘stressed’. There are two major themes that come out of this. The first is that response to stress operates at all levels of organisation, requiring co-ordination at the level of the whole plant; whether this is in relation to mineral deficiency, mineral toxicity, water deficit, salinity, or to the need to tolerate desiccation. The second is that there is often a conflict between the ecological and the agricultural advantages. Competitive advantage can be about survival, and conserving resources can be an advantage if it increases the chance of completing the life cycle, even if it means slowing down. Agricultural advantage tends towards brinkmanship; that is, getting the maximum yield depends on taking water use to the limit. What suits agriculture may not work in the wild, and vice versa. There is, understandably, perhaps inevitably, an ever-increasing focus on details, individual processes, individual genes, and individual proteins. It is, however, vital to keep in sight the much wider stage on which the consequences and manipulations of individual processes, and manipulations of those processes, are played out.
Reference Knauth L. P. (1998) Salinity history of the early oceans, Nature 395, 554.
2 Solutes: what are they, where are they and what do they do? Tim Flowers
2.1
Solutes: inorganic and organic
Plants depend on solutes in solution for most of their biochemistry and to develop the turgor pressure necessary for growth and form. In this chapter, approaches to qualitative and quantitative analysis of solutes present in cells and their subcellular compartments are outlined (further experimental details can be found in Chapter 4). For inorganic ions, quantitative analysis can usually be achieved in a single step, while organic compounds mostly have to be separated before their concentration can be determined.
2.2
Analysis of inorganic elements
The solutes that are found in cells are either accumulated from the environment or created within the plant; generally, organic compounds are synthesised while inorganic solutes are acquired from the soil. There is a variety of methods by which inorganic elements can be detected and quantified in plants – in extracts or in plant material that has been vaporised. Analysis broadly depends on one of the following: (a) the optical properties of elements when burning; (b) the mass of the element or its ions; (c) the emission of X-rays (X-ray fluorescence); (d) the use of ion-specific electrodes or (e) the chromatographic separation of ions (ion chromatography).
2.2.1
Obtaining material for analysis
For some analytical techniques, plant material can be used directly either by vaporising it at high temperature (e.g. see Section 2.2.2) or by freezing it at very low temperature (e.g. see Section 2.6.2). In most cases, however, mineral elements are extracted prior to analysis. This is most simply done by heating a plant or plant part in water or dilute acid (e.g. 100 mM acetic acid) – a couple of hours at 80◦ C will extract virtually all of any Group 1 cations (e.g. sodium or potassium) present in that tissue. In order to ensure complete dissolution of mineral elements, the plant material can either be heated in a mixture of concentrated nitric acid and sulphuric acid and the extract diluted for analysis or heated alone (dry ashed) at high temperature (550◦ C) to remove all the organic components before dissolution of the inorganic matter in dilute nitric acid (Humphries, 1956). Some constraints are imposed by the nature of (and impurities in) the acids used to dissolve the samples or by loss of those elements that are volatile below the dry-ashing temperature.
16
2.2.2
PLANT SOLUTE TRANSPORT
Optical methods
When vaporised (atomised) in a flame, atoms emit light, as electrons that have absorbed energy fall back into lower energy shells; the wavelength of the emitted light is characteristic of the element and the number of photons emitted is in proportion to the elemental concentration. These characteristics of the light emitted when elements are burned form the basis of one of the simplest means of determining the mineral composition of plants. An extract is converted into a fine mist (nebulised) and blown into a flame (e.g. acetylene burning in air). Elements do not need to be separated: all that is needed is a flame, a monochromator (an optical device that selects the wavelength, generally a diffraction grating) and a detector (e.g. a photomultiplier) to measure how much light is emitted at that specific wavelength. For example, any potassium in an extract will be atomised and emit light at a wavelength of 766.5 nm; the amount of light will be determined by the photomultiplier and hence the concentration of potassium can be estimated. This is flame emission spectrometry (FES). Not all elements emit sufficient light for analysis using FES, but they can still be analysed using their absorption of light when atomised in a flame. In atomic absorption spectrophotometry (AAS), the monochromator and detector are used to determine how much light of a specific wavelength is absorbed after passing through an atomised element. The light is emitted from a lamp that contains the element to be analysed (e.g. potassium), which is heated by a tungsten filament in an atmosphere of an inert gas such as argon. For potassium, the lamp will emit light at wavelengths of 769.9, 766.5, 407.7 and 404.4 nm. The monochromator is used to select one of these wavelengths and the element in the flame will absorb light in proportion to its concentration – and so can be determined quantitatively. Lamps can be obtained for a wide range of elements and although an air/acetylene flame is not hot enough to atomise all elements (e.g. silicon), hotter flames can be obtained by burning acetylene in nitrous oxide. While conventional FES and AAS use a nebuliser to deliver solution into a flame, it is also possible to atomise elements using a hollow graphite rod that is heated electrically to several thousand degrees. This ‘graphite furnace’ (GF) can be used to atomise a solution or solid material without the need for extraction: elemental analysis is by AAS (termed GF-AAS). A further possibility is to spray solution into a stream of argon that flows into a ‘torch’ where the gas stream is heated to about 10 000◦ C using a radio-frequency generator. At this temperature, a plasma forms where the atoms are present in an ionized state. This is known as an inductively coupled plasma or ICP. Elemental composition can be determined using optical emission spectroscopy.
2.2.3
Mass spectrometry
ICP can also be combined with mass spectrometry, where the analysis depends not on optical emission, but on the determination of the mass of elements ionised in the plasma (ICP-MS). The solute can be introduced to the plasma via a nebuliser or directly, without first making a liquid extract, using a laser (laser ablation ICP-MS).
SOLUTES: WHAT ARE THEY, WHERE ARE THEY AND WHAT DO THEY DO
17
Unlike AAS or FES, which provides information on a single element for each test, ICP-MS can provide information on many elements in a single analysis.
2.2.4
X-ray fluorescence
Elements can also be estimated by their emission of X-rays. Just as light is emitted as electrons return to the ground state after absorbing energy when raised to high temperature, X-rays are emitted when elements are excited in a beam of X-rays (high-energy photons) or high-energy electrons: the process is known as X-ray fluorescence (XRF). This is a very powerful tool for biologists, especially when used in conjunction with an electron microscope (see Section 2.6.2).
2.2.5
Ion-specific electrodes
The estimation of the concentration of elements using ion-specific electrodes is based on completely different properties of materials than those discussed so far. A membrane is used to separate ions and this leads to a difference in voltage across that membrane. The best known of ion-specific electrodes is the pH electrode. In this electrode, the membrane is made of a glass that is permeable to hydrogen ions, but not to other ions. Hydrogen ions diffuse through the glass and come to equilibrium with the external solution; this leads to a difference of voltage across the membrane, which is measured using a high-impedance voltmeter in conjunction with a standard ‘reference’ electrode: the potential difference is directly proportional to the logarithm of the ionic concentration in the external solution (according to the Nernst equation; see Section 3.6.4). Apart from hydrogen ions, there are electrodes whose potential is responsive to the concentration of NH 4 + , Ba2+ , Ca2+ , Cd2+ , Cu2+ , Pb2+ , Hg2+ , K+ , Na+ , Ag+ , Br− , CO 3 2− , Cl− , CN− , F− , I− , NO 3 − , NO 2 − , ClO 4 − , S− and SCN− – none is as specific as the pH electrode and so care has to be taken in the presence of other ions that can also cross the membrane (see also Section 4.4.5.1).
2.2.6
Ion chromatography
This is a form of liquid chromatography where ions in solution are separated by their interaction with a resin. Generally, the ions are detected by the conductivity of the effluent from the column in which the ions have been separated; ion chromatography can be used to detect and quantify anions as well as cations and each analytical run provides information on all the ions that are separated.
2.3
Solute concentrations
The results of analyses generally provide data on the quantity (e.g. in grams or moles) of a substance extracted from a known mass of fresh or dry weight. From these data it is possible to calculate the content per plant or plant part or the concentration expressed per unit dry mass or fresh mass or mass of water. However, it is not
18
PLANT SOLUTE TRANSPORT
always easy to determine the concentration in situ as this depends on knowing not only how much of the solute is present but also how much water is present. There is also a question of whether that water behaves as free liquid water or is influenced by macromolecules that are present. If water exists in microdomains of rapidly exchanging regions of high and low density (Wiggins, 2001) with different solvent properties and if these domains are influenced by surfaces and solvents, then the effective ion concentrations are likely to be different from those calculated from estimates of total quantities of solutes and water. Although concentrations can be estimated, effective ion concentrations or activities (the parameter that determines the reactivity and movement of an ion in solution) generally remain unknown, except where they have been measured directly using an ion-specific microelectrode (although there are computer programs that allow their estimation; see Section 4.4.1.1). In a dilute solution (say less than 10 mM) containing a single solute, the solute interacts primarily with the solvent (water), but as solutions become more concentrated, there is an increasing solute–solute interaction and this affects the properties of the solution – both the ‘effective’ concentration of the solute and the properties of the solvent. The effective concentration of the solute is described by its activity. The activity (a) of a solute j (the units remain mM) is a function of the concentration (c, mM) such that: a j = λ j cj
(2.1)
where γ j is the activity coefficient of the solute j. In solutions, cations exist with anions and it is the mean activity coefficient (λ ± ) that is estimated. Activity coefficients are generally less than 1, and especially so for charged solutes such as ions. For example, at 25◦ C a 100 mM solution of KCl has a mean molal activity coefficient of 0.77 (Robinson and Stokes, 1959). In a mixed solution of 100 mM monovalent cations and anions and 25 mM divalent cations and anions – the sort of solution that might occur in plant cells – the mean molar activity coefficient for the monovalent ions is just 0.7 (see Chapter 3 in Nobel, 2005).
2.4
Organic compounds
It is generally more complex to separate and quantify organic compounds than inorganic ions, since there are so many organic molecules in so many different classes – for example, sugars, sugar alcohols, amino acids, organic acids and proteins. In general, these compounds have to be separated chromatographically and then, once separated, there is a variety of methods that can be used to detect individual compounds. Separation may be achieved by liquid or gas chromatography, which may be used in conjunction with mass spectrometry or nuclear magnetic resonance (NMR). In recent years, increasing use has been made of NMR to analyse the composition of plant material in vivo or in extracts. NMR occurs when atoms with ‘spin’ (a fundamental property of nature like electrical charge) are exposed to an oscillating magnetic field while held in a powerful stationary magnetic field. For the analysis of plant metabolites, important atoms that exhibit spin are 1 H, 2 D, 13 C, 14 N, 23 Na and
SOLUTES: WHAT ARE THEY, WHERE ARE THEY AND WHAT DO THEY DO
19
31
P (Krishnan et al., 2005; Mesnard and Ratcliffe, 2005); 23 Na has recently been used to map the distribution of sodium in stem tissues (Rokitta et al., 2004).
2.5
Range of solutes found in plants
Solutes that are found in plant cells can be broadly divided by function (see Section 2.7) as well as whether they are inorganic or organic. For all plants, N, P, S, K, Mg, Ca, Fe, Mn, Zn, Cu, B, Mo, Cl and Ni are recognised as ‘essential’, while there is discussion about Na and Si (see also Reuter and Robinson, 1997; Chapter 12). Amongst the essential elements, some (such as Mo and Ni) are required in low quantities for specific biochemical functions (e.g. nitrate reductase requires Mo and urease Ni); others (such as S, P, N, Mg, Ca and K) are present in much higher quantities (tens of thousands of times the quantities of Ni and Mo; see Marschner, 1995). It is, however, extremely difficult to generalise about the concentrations of inorganic ions in plants, because plant species and habitats vary dramatically. For example, most plants growing in normal soils have very little sodium in their leaves, perhaps tens of micromoles per gram dry weight, but for plants growing in saline soils the concentration of Na can reach several millimoles per gram dry weight (see Chapter 14). As already mentioned, organic solutes are extremely diverse; they make up the major metabolites found in all cells (e.g. the sugars and sugar phosphates of glycolysis, the Krebs cycle and the Calvin cycle) and secondary metabolites (which vary greatly between species and tissues), as well as hormones (e.g. indole acetic acid, abscisic acid, gibberellins and kinins), storage compounds (sugars such as sucrose in many species) and osmoprotectants (such as glycine betaine; see, e.g., Chapter 13). More details of some of these groups will be found in later chapters of this book; this chapter continues with a summary of how the localisation of solutes in cells can be discovered.
2.6
Localisation
Plants are visibly complex when viewed under a microscope, their different cells having clearly different appearances and ultrastructure: the meristematic cells of the growing plants have dense cytoplasmic contents, while the cells in leaves contain chloroplasts and the parenchymatous cells of the root cortex appear dominated by large, apparently empty, vacuoles.
2.6.1
Stereological analysis
Plant cells, all of which are bordered by cell walls, contain separate compartments enclosed by membranes. Knowledge of the volume of these cellular compartments is necessary in order to determine the distribution and concentration of solutes in cells. The relative volume of an individual cellular compartment can be estimated by stereological methods that use two-dimensional images to generate quantitative
20
PLANT SOLUTE TRANSPORT
estimates of relative volume (Weibel et al., 1966; Russ and Dehoff, 2001). The basis of the analysis is the computation of the area of the whole cell and its compartments from the two-dimensional image: estimates of area are generally made by counting intersections of the cell and its organelle(s) with a grid or a random set of points. In mature cells, the vacuole is the dominant compartment, while in photosynthetic cells the chloroplasts form the dominant subcompartment within the cytoplasm. For example, 72.5% of the volume of the mesophyll cells of Suaeda maritima is occupied by the vacuole; the remainder of the volume is made up by the chloroplasts (12.7%), the rest of the cytoplasm (9.8%), the cell wall (4.3%) and the mitochondria (0.6%) (Hajibagheri et al., 1984).
2.6.2
Inorganic elements and electron microscopy
Some elements are electron dense and can be seen directly in an electron microscope, although it is not possible to distinguish between different electron-dense elements without further analysis. However, since electron microscopes produce focused beams of high-energy electrons that cause X-rays to be emitted from the specimens being examined, a microscope fitted with an appropriate X-ray detector (of the energy or wavelength) can be used to identify and quantify the elemental composition of the specimen. X-ray microanalysis can be undertaken with both scanning and transmission microscopes and software has been developed that can be used to map elements within cells viewed with the microscope (Morgan et al., 1999). A vital aspect of all such studies, however, is an ability to fix the element under consideration in its natural site in the cell. It is pointless to analyse the distribution of a solute if the very process of analysis has caused the substance to be redistributed. Solutes can be fixed either by precipitation – that is a chemical reaction to make an insoluble compound – or by freezing. A good example of the former approach is the use of sodium cobaltinitrite (a soluble salt) to precipitate potassium cobaltinitrite (an insoluble salt) in guard cells (Willmer and Fricker, 1996). The insoluble potassium salt can be visualised under a light microscope by conversion to cobalt sulphide; the cobalt in the cobaltinitrite is electron dense and so directly visible with an electron microscope. Using this technique it has been possible to demonstrate the movement of potassium ions during stomatal opening and closing (Willmer and Fricker, 1996; see also Section 6.2.1). Chloride can be localised in plant cells by precipitation with silver, which is also electron dense. As a preparative technique to fix solutes in their natural compartments, rapid freezing is more versatile than chemical precipitation for both scanning and transmission electron microscopy. The aim of cryopreservation is to freeze samples so rapidly that damage is not caused by the formation of ice crystals; necessary rates of freezing are around 10 000◦ C/s. Commonly, material is frozen at about −186◦ C, by direct immersion in melting or liquid nitrogen. However, this allows gaseous nitrogen to form between the coolant (liquid nitrogen) and the sample. The low thermal conductivity of the gas dramatically reduces the rate of freezing. It is better to cool a solvent such as 2-methyl butane (containing 8% methylcyclohexane to lower its freezing point) with liquid nitrogen (Harvey et al., 1976) as this avoids the
SOLUTES: WHAT ARE THEY, WHERE ARE THEY AND WHAT DO THEY DO
21
formation of gaseous nitrogen around the sample. Other more elaborate methods of freezing are to use a cold metal block, a jet of propane or high pressure (see chapters in Hajibagheri, 1999). High-pressure freezing (sometimes called ‘slam freezing’) uses a pressure of about 200 MPa to minimise the formation of ice crystals during freezing and hence enhance cryopreservation of tissue that is more than a monolayer of cells (see Hohenberg et al., 2003, and articles in the special issue). Frozen material can be used directly in both transmission and scanning microscopes with a cold stage. In the latter, images of the surface are produced and that surface can be obtained by sectioning prior to freezing or by fracturing the sample in the microscope (freeze fracture) or by milling. Milling can be achieved by a beam of gallium ions produced in the microscope and is used to produce a flat surface (focused ion beam or FIB milling; see Drobne et al., 2005a,b) and avoid artefacts of analysis produced by the topography of an unmilled surface. There is also a variety of techniques to remove water from the specimen before it is introduced into the electron beam. For scanning electron microscopy, water can be removed from the sample by freeze drying. Alternatively, samples can be dehydrated in acetone or ethanol before being subjected to ‘critical point drying’ to minimise distortions due to the effects of surface tension (see Hall, 1978); at the ‘critical point’, surface tension is reduced to zero. For analysis of thin sections by transmission electron microscopy, it is vital to minimise solute movement during the embedding process. Before embedding, frozen material is transferred, in the presence of a dehydrating agent, to an organic solvent – ether, ethanol or acetone – that is miscible with the resin to be used. The solvent is maintained below the freezing point of water, which is removed from the tissue to the dehydrating agent and substituted by the organic solvent – hence ‘freeze substitution’. Once substitution is complete, a suitable resin can be added and polymerised by the action of ultraviolet light. Cutting sections is perhaps the most difficult stage of the procedure, because the sections cannot be floated onto water without the loss of water-soluble elements. Consequently, sectioning has to be done dry – in the absence of water (organic solvents that will not dissolve the substances to be analysed do not have an appropriate surface tension to enable the sections to be floated away from the knife).
2.6.3
Ion-specific microelectrodes
Minature specific-ion electrodes can be used to report the activities of certain ions (such as H+ , K+ , Na+ and Ca2+ ; see also Section 2.2.5) within cells. Since the majority of the cell volume is occupied by the vacuole, measuring ion activities in this compartment is relatively simple. However, measuring ion activities within the cytoplasm of a mature plant cell is significantly more difficult. It is hard to locate an electrode, whose tip has a diameter of about 1 μm, in a cytoplasm that is only 1–2 μm wide. Electrophysiologists have, however, developed a way of identifying the position of an electrode tip using measurements of pH (Felle, 1993; Walker et al., 1998). Using pH electrodes, it has been established that the vacuole is considerably more acidic (pH about 5; Felle, 2005) than the cytoplasm (pH of about 7.2). By
22
PLANT SOLUTE TRANSPORT
constructing double- and triple-barrelled electrodes where one of the electrodes reports the activity of hydrogen ions, this allows the location of the electrode to be identified from the pH, and hence the other element(s) to be estimated in cytoplasm and/or vacuole. For example, using triple-barrelled electrodes reporting pH and the activities of sodium or potassium, sodium and potassium activities in barley could be separated into two populations (Carden et al., 2003), one having a mean pH of 5.6 (vacuolar) and the other a mean pH of 7.4 (cytoplasmic pool).
2.6.4
Direct sampling
Since the central vacuole comprises between 75 and 95% of the volume of a mature plant cell, its contents can be estimated simply by the analysis of sap expressed from tissues. Vacuolar sap is easily obtained from plant cells following one or more cycles of freezing and thawing, which makes the membranes surrounding the cell (the plasma membrane) and its vacuole (the tonoplast) leaky (see, e.g., Gorham et al., 1984). Centrifugation or simply pressure from a glass rod will extract vacuolar sap. Once a clear solution has been obtained, it can be subjected to any of the many methods available to determine its solute content. This sap will be contaminated by solutes from other compartments, but the contamination will be trivial in the context of any analysis that is undertaken to evaluate the major solutes that are stored in the vacuole. It has also proved possible to isolate intact vacuoles from plant cells (e.g. Leach et al., 1990) and these can be analysed for their contents, although exchange of solutes across the vacuolar membrane during the isolation cannot be ruled out. For mature cells, it is also possible to sample the vacuolar sap directly, using a microcapillary as a syringe. The procedure (Malone et al., 1989) was developed from a technique used to determine the turgor pressure within cells – the pressure probe. A glass capillary is drawn to an outer tip diameter of about 4 μm and filled with oil and connected to a pressure transducer. When used for microsampling, the turgor pressure in the cell is allowed to force vacuolar contents into the micropipette; the samples obtained can be used for determination of their osmotic pressure or for elemental analysis using XRF (Fricke et al., 1994). As already noted, extraction procedures are subject to contamination, and where a compartment is small in relative volume, contamination is an all-important issue. While chloroplasts can be extracted non-aqueously from plant cells, thus retaining water-soluble solutes, the binding of solutes from other compartments to the chloroplast envelope is an important source of potential contamination. Interestingly, chloride is retained in the chloroplasts even after aqueous preparation (see Flowers, 1988), suggesting that the envelope keeps its ability to retain solutes during preparative procedures developed to maximise biochemical activity. Further information on the solutes of subcellular organelles can be found in Chapter 7.
2.6.5
Use of fluorescent dyes
There are many dyes whose properties change depending on their environment: a simple example is the colour change of a pH indicator as the concentration of hydrogen ions changes. Similar properties can be used in conjunction with light microscopy to identify the location and concentration of solutes within cells. For
SOLUTES: WHAT ARE THEY, WHERE ARE THEY AND WHAT DO THEY DO
23
example, there are a number of dyes whose fluorescence changes as a function of the concentration of minerals in their environment (see Section 4.4.4). Such dyes, generally, have to be injected into cells, but once present they can be illuminated with a specific wavelength of light which excites their fluorescence. So, fura-2 can report the concentration of calcium within a cell and sodium- and potassium-binding benzofuran isophthalates (SBFI, sodium-binding benzofuran isophthalatecan and PBFI, potassium-binding benzofuran isophthalate) report the concentrations of sodium and potassium. SBFI appears to provide a reasonable estimate of cytosolic Na, but Na interfered with the use of PBFI in root hairs exposed to external sodium chloride (Halperin and Lynch, 2003).
2.6.6
Flux analysis
The three major compartments of plant cells are, from the outside looking in, the cell wall, the cytoplasm and the vacuole. The cytoplasm and the vacuole are delimited by membranes that represent a resistance to the movement of solutes – the plasmalemma and the tonoplast, respectively. Solutes entering or leaving the cytoplasm have to cross only the plasma membrane; solutes entering or leaving the vacuole must cross both membranes. Flux analysis is based on following the movement of a labelled (generally labelled with a radionuclide) solute in a system which is otherwise at equilibrium. Analysis of the movement of the label provides information on the characteristics of the membranes and the compartments they define. In practical terms, tissue is equilibrated with a solution containing the solute under investigation (e.g. KCl) containing a tracer of known specific activity (specific activity is the ratio of labelled to unlabelled species; in the case of KCl, the tracer could be either 42 K or 36 Cl). After a sufficient period of time for the specific activity of the labelled solute to become uniform in the tissue (this may be hard to achieve and remain uncertain for the vacuole), the efflux of the tracer into an unlabelled, but otherwise identical, external solution is followed with time. This can be achieved by transferring the labelled tissue into fresh unlabelled solution at, say, 1, 2, 4, 8, 15, 30, 45, 60, 90, 120, 150 and 180 minutes after the initial removal from the labelled solution. The amount of tracer in the solutions is determined and that remaining in the tissue at the various sampling times calculated. The data can be analysed according to a model that assumes efflux occurs from three compartments (extracellular spaces, ECS; cytoplasm, C and vacuole, V). This three-compartment model assumes efflux of tracer is composed of three first-order rates of loss of activity superimposed on one another. For loss from the ECS, C and V: ln c = −kt + z
(2.2)
where c is the concentration, t is time, k is a rate constant and z is a constant from an integration. Thus the relationship between the logarithms of the concentration of ions in the tissue against t should be linear. The logarithm of the amount of isotope remaining in the tissue at various times is plotted against time and a straight line fitted to the linear portion of the curve: this represents the efflux from the vacuole (Figure 2.1). The total efflux is then corrected for efflux from the vacuole to provide a linear relationship for flux from
24 Logarithm of remaining activity
PLANT SOLUTE TRANSPORT
6.2
5.7
5.2 0
50
100
Logarithm of remaining activity
A
6 5.5 5 4.5 4
0
5
10
15
0.5
1 1.5 Time (minutes)
20
25
Logarithm of remaining activity
B
C
6
5.5
5 0
2
2.5
Figure 2.1 Flux analysis of 86 Rb-labelled potassium in maize roots. Maize roots (of 1 cm lengths) were immersed in a solution containing 1 mM KCl and 0.1 mM CaCl 2 , labelled with 86 Rb for 3 h. The labelled roots were rinsed rapidly to remove surface film and immersed in a series of unlabelled, but otherwise identical, solutions for a total period of 105 min, with solutions changed rapidly (each minute) at first. Radioactivity in the eluants, and remaining in roots at the end of the period, was determined by Cerenkov radiation. The logarithm of the remaining activity was plotted against time (A), showing a final, linear, phase interpreted as corresponding to efflux from across the tonoplast. This was subtracted and the data replotted (B), revealing a second linear phase interpreted as corresponding to efflux across the plasma membrane. Repeating the procedure again (C) revealed a third linear phase, corresponding to exchange of the extracellular spaces. Rate constants for exchange can be calculated from fitted linear regressions and the potassium content of the different compartments estimated.
the cytoplasm and, finally, efflux from the extracellular spaces, which includes the cell wall (see Flowers and Yeo, 1992, and Section 4.4.3). The data can provide information on the rate constants for loss from the compartments and, provided the compartment reaches the specific activity of the external solution, the content of the compartment. The analysis of the movement of radioactive tracers can also be used to determine the characteristics of influx. Recently, short-term experiments have been
SOLUTES: WHAT ARE THEY, WHERE ARE THEY AND WHAT DO THEY DO
25
used to provide information on the influx of 22 Na into cells. Roots of arabidopsis were exposed to sodium chloride and the unidirectional influx, estimated from measurements taken over a period of 2 min (Essah et al., 2003).
2.6.7
Organic compounds
As with the identification of organic solutes, their localisation in cells is much more difficult than with inorganic solutes. Although the elements C, N and O can be detected and mapped in electron microscopes, the great variety of possible compounds makes the analysis of specific molecules difficult. Consequently, specific reactions must be made to take place in situ. In some cases a stain or an antibody can be reacted with a specific organic compound and visualised either by its colour, its fluorescence when viewed under a fluorescence microscope or, in the case of antibodies, by the attachment of electron-dense gold particles to the antibody (see Hajibagheri, 1999). In most published cases, the technique has been used to localise proteins: recent examples are the localisation of isoprene synthase in poplar (Schnitzler et al., 2005) and proteins associated with the spread of beet necrotic yellow vein virus (Erhardt et al., 2005). The localisation of smaller solutes has rarely been attempted, although it has proven possible to localise glycine betaine to the cytoplasm of the cells of the salttolerant plant Suaeda maritima. By reacting iodoplatinic acid with glycine betaine in situ, an electron-dense deposit was formed that could be shown to contain both iodine and platinum (the reaction was carried out under conditions in which the solute was retained in the tissue by preparation using freeze substitution; Hall et al., 1978). The localisation of organic compounds can also be determined following cell fractionation in aqueous or non-aqueous conditions although the number of compartments that can be defined by this process is limited to nuclei, chloroplasts and mitochondria (e.g. Riens et al., 1991; Farre et al., 2001). As mentioned previously (Section 2.6.4), contamination by binding of substances to the external membranes of organelles is a potential problem, as is leakage through the same membranes.
2.7
What do they do?
The function of a solute in a cell depends, in part, on the particular solute and, in part, on its location. Clearly it is not possible to ascribe here a function to the myriad of solutes that occur in plant cells.
2.7.1
Vacuoles
Vacuoles are the largest compartments in mature plant cells. All cells are derived from meristematic cells and generally undergo a massive expansion of the vacuole during development. Meristematic cells have a volume of about 0.5–8 pL (a picolitre is 10−12 of a litre), and as development proceeds, cell volumes increase and reach values between 50 and 5000 pL. The vacuoles are the sites of storage of most (in terms of quantity – that is volume times concentration) of the solutes present in mature cells.
26
PLANT SOLUTE TRANSPORT
A particularly important aspect is the storage of energy in the form of a reservoir of protons within the vacuole. These protons can be exchanged in the acquisition of sucrose or other mineral elements. A large number of plant extracts have been analysed since the 1880s, primarily to obtain estimates of the osmotic pressure within cells: these range from fractions of an MPa to 5 or more MPa (Steiner, 1939; Flowers et al., 1977). The accumulation of solutes in the vacuole is essential for the generation of turgor pressure in cells (see Section 3.2.3), which in turn provides the shape and form of non-woody species and the driving force for the growth in all plants. Many plant extracts have also been analysed for the nature of the solutes present; the major components of vacuoles are sugars, potassium, calcium, magnesium and nitrate ions. However, since there can be large differences in the composition of sap between plants, depending on the species and the environment in which the plant is growing, the analysis is valuable only in context. For example, in the roots of beet, it is sugars that constitute the major solutes stored for the generation of energy for new growth after winter. Where plants are growing on saline soils, the sap is commonly dominated by sodium and chloride ions whose accumulation adjusts the plant water potential (see Section 3.2.2) to that of the external medium. In plants utilising crassulacean acid metabolism (see Section 13.6.2), malic acid may be present in high concentrations, particularly at the end of the night.
2.7.2
Organelles and the cytoplasm
The cytoplasm and its constituent organelles are the sites of enzymes (proteins), which require relatively high (about 100 mM) concentrations of ions for their stability and activation. Potassium plays a particularly important role in the activation of enzymes (Leigh and Wyn Jones, 1984), while other elements such as zinc and magnesium are important co-factors in many enzymatic reactions (Marschner, 1995). This specificity contrasts with the osmotic role which can often be fulfilled by a variety of solutes. During water deficit, adaptation to low temperature and in plants adapted to growth under saline conditions, specific solutes can be synthesised to act as osmoprotectants and cryoprotectants (cf. Section 13.6); some of these at least (e.g. glycine betaine) are likely to be located largely in the cytoplasm.
2.7.3
Cell walls
Cell walls occupy about 3% of the total cell volume and of that volume about 1% is water-available space (Flowers and Yeo, 1986). This means that small changes in ion concentrations in that compartment can have a disproportionately large effect on the water relations of the cell (Flowers and Yeo, 1986) and are able to alter turgor (Clipson et al., 1985).
2.7.4
Conclusions
Plant cells depend on solutes for their turgor pressure and growth. Growth requires the uptake of water driven by gradients in solute concentration. Solutes are also
SOLUTES: WHAT ARE THEY, WHERE ARE THEY AND WHAT DO THEY DO
27
required as substrates for reactions that generate the physical substance of cells. Solutes are at the centre of plant life. Advances in chemical analysis have allowed many of the solutes in cells to be identified and their location discovered and led to the description of the ‘proteome’ (the proteins in cells), the ‘metabolome’ (the profile of small metabolites in cells) and the ‘ionome’ (the ions in cells; Salt, 2004). Understanding how plants respond to changes in their ionome is at the heart of this book.
References Carden, D.E., Walker, D.J., Flowers, T.J. and Miller, A.J. (2003) Single-cell measurements of the contributions of cytosolic Na+ and K+ to salt tolerance. Plant Physiology 131, 676–683. Clipson, N.J.W., Tomos, A.P., Flowers, T.J. and Wyn Jones, R.G. (1985) Salt tolerance in the halophyte Suaeda maritima (L.) Dum.: the maintenance of turgor pressure and water potential gradients in plants growing at different salinities. Planta 165, 392–396. Drobne, D., Milani, M., Zrimec, A., Berden Zrimec, M., Tatti, F. and Draslar, K. (2005a) Focused ion beam/scanning electron microscopy studies of Porcellio scaber (Isopoda, Crustacea) digestive gland epithelium cells. Scanning 27, 30–34. Drobne, D., Milani, M., Zrimec, A., Leser, V. and Berden Zrimec, M. (2005b) Electron and ion imaging of gland cells using the FIB/SEM system. Journal of Microscopy-Oxford 219, 29–35. Erhardt, A., Vetter, G., Gilmer, D., et al. (2005) Subcellular localization of the triple gene block movement proteins of beet necrotic yellow vein virus by electron microscopy. Virology 340, 155–166. Essah, P.A., Davenport, R. and Tester, M. (2003) Sodium influx and accumulation in Arabidopsis. Plant Physiology 133, 307–318. Farre, E.M., Tiessen, A., Roessner, U., Geigenberger, P., Trethewey, R.N. and Willmitzer, L. (2001) Analysis of the compartmentation of glycolytic intermediates, nucleotides, sugars, organic acids, amino acids, and sugar alcohols in potato tubers using a nonaqueous fractionation method. Plant Physiology 127, 685–700. Felle, H.H. (1993) Ion-selective microelectrodes – their use and importance in modern plant-cell biology. Botanica Acta 106, 5–12. Felle, H.H. (2005) pH regulation in anoxic plants. Annals of Botany 96, 519–532. Flowers, T.J. (1988) Chloride as nutrient and osmoticum. In: Advances in Plant Nutrition, Vol. 3 (eds L¨auchli, A. and Tinker, B.), pp. 55–78, Praeger, New York. Flowers, T.J., Troke, P.F. and Yeo, A.R. (1977) The mechanism of salt tolerance in halophytes. Annual Review of Plant Physiology 28, 89–121. Flowers, T.J. and Yeo, A.R. (1986) Ion relations of plants under drought and salinity. Australian Journal of Plant Physiology 13, 75–91. Flowers, T.J. and Yeo, A.R. (1992) Solute Transport in Plants. Blackie Academic and Professional, London. Fricke, W., Leigh, R.A. and Tomos, A.D. (1994) Epidermal solute concentrations and osmolality in barley leaves studied at the single-cell level – changes along the leaf blade, during leaf ageing and NaCl stress. Planta 192, 317–323. Gorham, J., McDonnell, E. and Wyn Jones, R.G. (1984) Salt tolerance in the Triticeae: Leymus sabulosus. Journal of Experimental Botany 35, 1200–1209. Hajibagheri, M.A., Hall, J.L. and Flowers, T.J. (1984) Stereological analysis of leaf cells of the halophyte Suaeda maritima (L.) Dum. Journal of Experimental Botany 35, 1547–1557. Hajibagheri, M.A.N.. (ed.) (1999) Electron Microscopy Methods and Protocols. Humana Press, Totowa, NJ. Hall, J.L.. (ed.) (1978) Electron Microscopy and Cytochemistry of Plant Cells. Elsevier/North Holland Biomedical Press, Amsterdam. Hall, J.L., Harvey, D.M.R. and Flowers, T.J. (1978) Evidence for the cytoplasmic localization of betaine in leaf cells of Suaeda maritima. Planta 140, 59–62.
28
PLANT SOLUTE TRANSPORT
Halperin, S.J. and Lynch, J.P. (2003) Effects of salinity on cytosolic Na+ and K+ in root hairs of Arabidopsis thaliana: in vivo measurements using the fluorescent dyes SBFI and PBFI. Journal of Experimental Botany 54, 2035–2043. Harvey, D.M.R., Hall, J.L. and Flowers, T.J. (1976) The use of freeze-substitution in the preparation of plant tissues for ion localisation studies. Journal of Microscopy 107, 189–198. Hohenberg, H., Muller-Reichert, T., Schwarz, H. and Zierold, K. (2003) Special issue on high pressure freezing – foreword. Journal of Microscopy-Oxford 212, 1–2. Humphries, E.C. (1956) Mineral components and ash analysis. In: Modern Methods of Plant Analysis, Vol. 1 (eds Paech, K. and Tracey, M.V.), pp. 468–502. Springer, Berlin Krishnan, P., Kruger, N.J. and Ratcliffe, R.G. (2005) Metabolite fingerprinting and profiling in plants using NMR. Journal of Experimental Botany 56, 255–265. Leach, R.P., Wheeler, K.P., Flowers, T.J. and Yeo, A.R. (1990) Molecular markers for ion compartmentation in cells of higher plants. I. Isolation of vacuoles of high purity. Journal of Experimental Botany 41, 1079–1087. Leigh, R.A. and Wyn Jones, R.G. (1984) A hypothesis relating critical potassium concentrations for growth to the distribution and functions of this ion in the plant cell. New Phytologist 97, 1–13. Malone, M., Leigh, R.A. and Tomos, A.D. (1989) Extraction and analysis of sap from individual wheat leaf cells: the effect of sampling speed on the osmotic pressure of extracted sap. Plant, Cell and Environment 12, 916–926. Marschner, H. (1995) Mineral Nutrition of Higher Plants. Academic Press, London. Mesnard, F. and Ratcliffe, R.G. (2005) NMR analysis of plant nitrogen metabolism. Photosynthesis Research 83, 163–180. Morgan, A.J., Winters, C. and Sturzenbaum, S. (1999) X-ray microanalysis techniques. In: Electron Microscopy Methods and Protocols (ed Hajibagheri, M.A.N.), pp. 245–276. Humana Press, Totowa, NJ. Nobel, P. (2005) Physiochemical and Environmental Plant Physiology. Elsevier Academic Press, Amsterdam. Reuter, D. and Robinson, J.B., (eds) (1997) Plant Analysis: An Interpretation Manual. CSIRO Publishing, Collingwood, Victoria, Australia. Riens, B., Lohaus, G., Heineke, D. and Heldt, H.W. (1991) Amino-acid and sucrose content determined in the cytosolic, chloroplastic, and vacuolar compartments and in the phloem sap of spinach leaves. Plant Physiology 97, 227–233. Robinson, R.A. and Stokes, R.H. (1959) Electrolyte Solutions. Butterworths, London. Rokitta, M., Medek, D., Pope, J.M. and Critchley, C. (2004) Na-23 NMR microimaging: a tool for non-invasive monitoring of sodium distribution in living plants. Functional Plant Biology 31, 879–887. Russ, J.C. and Dehoff, R.T. (2001) Practical Stereology. Springer, New York. Salt, D.E. (2004) Update on plant ionomics. Plant Physiology 136, 2451–2456. Schnitzler, J.P., Zimmer, I., Bachl, A., Arend, M., Fromm, J. and Fischbach, R.J. (2005) Biochemical properties of isoprene synthase in poplar (Populus x canescens). Planta 222, 777–786. Steiner, M. (1939) Die Zusammensetzung des Zellsaftes bei hoheren Pflanzen in ihrer okologischen Bedeutung. Ergebnisse der Biologie 17, 152–254. Walker, D.J., Black, C.R. and Miller, A.J. (1998) The role of cytosolic potassium and pH in the growth of barley roots. Plant Physiology 118, 957–964. Weibel, E.R., Kistler, G.S. and Scherle, W.F. (1966) Practical stereological methods for morphometric cytology. Journal of Cell Biology 30, 23–38. Wiggins, P.M. (2001) High and low density intracellular water. Cellular and Molecular Biology 47, 735–744. Willmer, C. and Fricker, M. (1996) Stomata. Chapman & Hall, London.
3 The driving forces for water and solute movement Tim Flowers and Anthony Yeo
3.1
Introduction
This chapter begins by describing some basic properties of water before embarking on an outline of the thermodynamics of solutions: the objective is to provide a background sufficient for the understanding of the forces that cause water and solutes, particularly ions, to move through plants. There are sections dedicated to water movement, ion movement and the linked flows of water and solutes.
3.2
Water
A water molecule consists of two hydrogen atoms covalently bonded to an atom of oxygen. Oxygen is the more electronegative so there is a greater probability of electrons being close to the oxygen than to the hydrogen, leading to partial charge separation and a partial negative charge on the oxygen and partial positive charges on the hydrogen atoms. This makes water a polar molecule and the electrostatic attraction between adjacent molecules constitutes a force known as the hydrogen bond. This lends ‘structure’ or ‘order’ to water, where there are continual transient associations between clusters of molecules. When water freezes, all the molecules are joined by hydrogen bonds: only 15% of these bonds break on melting and at 25◦ C, 80% of the hydrogen bonds are still intact, meaning that water may be termed ‘semicrystalline’ (Nobel, 2005). It is these associations between water molecules, and the free energy change needed to disintegrate them (some 20 kJ mol−1 ), that accounts for water being a liquid at temperatures regarded as ‘normal’: the structurally similar, but nonpolar, hydrogen sulphide is a gas at similar temperatures. The presence of hydrogen bonds in liquid water underlines properties vital for the physiology of plants. Work must be done to separate water molecules into the gas phase (the latent heat of vaporisation) and the heat required to evaporate water (44 kJ mol−1 at 25◦ C) is enough to dissipate most of the heat load of solar radiation falling on a wet surface. Water also has a comparatively large thermal capacity (a relatively large amount of energy is needed to raise its temperature). These two properties of water (the latent heat of vaporisation and the thermal capacity) are crucial to plants, buffering fluctuations in environmental temperature and providing the basis for transpirational cooling.
30
PLANT SOLUTE TRANSPORT
A further consequence of the mutual attraction between water molecules – its tensile strength – is integral to transpiration. It is its tensile strength that gives water its cohesion and allows it to hang in long columns in the xylem (see Section 9.2): the attraction between liquid and solid surfaces is adhesion, and when, according to the material, adhesion is greater than cohesion, this results in capillary rise. Cohesion underlies the phenomenon of surface tension (or surface free energy): the mutual attraction between molecules tends to minimise the surface at a liquid–gas interface. This is why water tends to form droplets and why there is a concave curvature at a water surface. The concave shape is produced because surface tension generates a negative pressure within the water, which is inversely proportional to the radius. The tension is negligible in a glass of water, but enormous at the pore sizes found in clay soils and plant cell walls (see Section 3.5.1). As water is virtually incompressible, it can support both tensions (negative pressures) and positive pressures, the latter allowing it to provide the hydrostatic skeleton of cells (turgor pressure; see Section 3.3.3). The polar nature of water also gives it a large dielectric constant and makes water one of the most general solvents known, particularly for the charged ionic species that are required by plants for their mineral nutrition. Being slightly charged, the polar water molecules are able to associate with, and shield, the electrical charges of other ions, preventing them from interacting with each other and, over certain ranges of activities (see Sections 2.3 and 3.3.3 for a definition of activity), preventing them from precipitating from solution. This is essential for maintaining the mix of ionic species needed by cells. This shielding effect is also what provides the protective hydration shells around macromolecules, by electrostatic attraction to charged or partially charged groups on the surface. This helps make proteins soluble and limits unwanted aggregation, or other interaction between macromolecules, within the cell – a problem that arises when cells are dehydrated during water deficit induced by drought, freezing or salinity. There are two other consequences of the ordering of water molecules at surfaces for the structure and activity of proteins – and hence cellular biochemistry. Thermodynamic considerations underlie the folding pattern of proteins with predominantly hydrophilic (charged or partially charged) groups at the surface and hydrophobic (uncharged groups) in the interior (similar to the lipid bilayer membrane; see Section 4.2.1). Structuring of water at protein surfaces is one of the factors contributing to the tendency of proteins to maintain their tertiary structure. The water in such hydration shells is more ordered than the ‘quasi-crystalline’ water at distance from a surface, and such structured water is less able to fulfil the liquid properties of water, including acting as a solvent. This leads to the concept of solute-available space within cell compartments. In the cluttered cytoplasm, packed with jostling membrane systems and macromolecules, a considerable proportion of the water may be locked away in hydration shells. Extreme views have been that little of the water is truly liquid. This has profound implications for what a ‘concentration’ in a cell compartment is or means (already mentioned in Section 2.3). Solutes not only dissolve in water, they can affect its solvent properties as well, and if they do so are known as cosolvents. They are of two types. A chaotrope is
THE DRIVING FORCES FOR WATER AND SOLUTE MOVEMENT
31
a cosolvent that decreases structuring of water (for example urea and other protein denaturants). A kosmotrope is a cosolvent that increases structuring of water (for example glycerol, glycine betaine and other protein stabilisers). This is particularly important in an ecological context where certain solutes have protective roles in dehydration resistance and in dehydration tolerance (see Chapter 15).
3.3
Free energy and the properties of solutions
In biological systems, the largest flow of water is from soil, through plants to the atmosphere – the so-called soil–plant–atmosphere continuum. Under natural conditions, liquid water enters the system following rainfall – it may be distant rainfall with subsequent surface or subsurface flow, but precipitation of liquid water starts the cycle – and water ends up in the gas phase, in the atmosphere. Little (only about 2%; see Munns, 2005) of the water flowing in the system is retained in plants.
3.3.1
Free energy and chemical potential
From a thermodynamic point of view, the soil–plant–atmosphere system can be seen as a system that operates at approximately constant temperature and pressure. Atmospheric pressure does vary, but variations are normally small (about 10% of the average atmospheric pressure at sea level, which is 101.3 kPa): the extremes are about 87 and 109 kPa (http://en.wikipedia.org/wiki/Atmospheric pressure). Temperature also varies (the extremes on the world surface are about −90 to +58◦ C; http://en.wikipedia.org/wiki/Temperature extreme), but it is assumed that temperatures are virtually constant for short periods – where a temperature rises from 10 to 40◦ C over 6 h, then that would be an increase of only about 0.08◦ C min−1 . For a spontaneous change to occur in such a system at constant temperature and pressure, there must be a decrease in free energy. So, if water moves spontaneously from, say, plant to atmosphere, the free energy of the water must decrease. Free energy – formally, Gibbs free energy (G) – decreases for spontaneous processes at constant temperature and pressure. However, free energy is an extensive property; it depends, like mass, on the quantity of a substance: the bigger the system, the more the free energy. Hence it is important to be able to assess the amount of free energy of a substance independent of its quantity. This free energy per mole of substance is termed the chemical potential (μ). For water, its chemical potential (μ w ) is given by the equation: ∂G (3.1) μw = ∂n w T,P,E,h,n j where n w represents the number of moles of water, T is the temperature, P is the pressure, E is the electrical potential, h is the height in a gravitational field and nj is the number of moles of other substances. Water will flow spontaneously from high to low chemical potential. The bigger the difference in chemical potential, the
32
PLANT SOLUTE TRANSPORT
greater the driving force for water flux (the amount moving per unit area per unit time). Equation 3.1 indicates that the chemical potential of water (in a system such as the soil–plant–atmosphere system) depends on temperature (T), pressure (P; water can be pumped through pipes), interactions between water and solutes (nj ; solutes lower μ w because they lower the activity of water; see Section 3.3.3), height in a gravitational field (h; it takes work to lift water; water runs freely downhill) and electric fields (E). However, the influence of the latter on the chemical potential of water is insignificant, as water does not carry a net positive or negative charge, and so E can be ignored. Consequently, the chemical potential of water at constant temperature depends on its activity (a w ), pressure (P) and height (h) in a gravitational field. This is expressed mathematically as: μw = μ∗w + RT ln aw + V¯w P + m w gh
(3.2)
where R is the gas constant, T is the absolute temperature, a w is the activity of the water, V¯w is the partial molal volume of water (see below), P is the pressure, m w is the mass per mole of water, g is the acceleration due to gravity, h is the height in a gravitational field and μ∗w is an arbitrary chemical potential of water under standard conditions (a constant of integration). The standard state (Eq. 3.2) is defined when a w = 1 (RT ln aw = 0), P = 1 and the height in the gravitational field is zero (m w gh = 0). In practical terms this is pure water at atmospheric pressure and the height (and temperature) of the system under consideration. The partial molal volume (V¯w ) is the rate of change of volume of water with increasing number of moles of water, when the number of moles of other substances, temperature, pressure, electrical potential and height in a gravitational field is kept constant (i.e. V¯w = (∂ V /∂n w )n j ,P,T,E,h ); its value is 1.805 ×10−5 m−3 mol−1 at 20◦ C.
3.3.2
Water potential and water potential gradients
Equation 3.2 is not readily usable, but it is possible to derive a more practical form of the relationship, firstly by defining ‘water potential’ as the difference between the chemical potential of water at any point in a system and that of pure free water in a standard state; that is: W =
μw − μ∗w V¯w
(3.3)
The term V¯w (m3 mol−1 ), the partial molal volume of water, is introduced to convert the units from those of free energy (J mol−1 ) to pressure (Pa – a Pascal is equivalent to a J m−3 ). Next, by substituting Eq. 3.2 into Eq. 3.3, the following relationship is reached: w = P − + ρw gh (3.4) where is the osmotic pressure −(RT/V¯w ) ln aw and ρ w is the density of water (m w/V¯w ).
THE DRIVING FORCES FOR WATER AND SOLUTE MOVEMENT
33
Equation 3.4 is commonly written as: w = p + π + g
(3.5)
where p is the pressure potential (which may be positive, zero or, where water is under tension, negative), π is the osmotic potential (a consequence of the presence of solutes and is always negative) and g is the gravitational potential (which is negligible in cells and small plants but may be significant in tall trees: it is important in soils as the driving force for deep drainage and for the uptake of water for deeprooted species; see footnote in Section 3.4). Thus the awkward arbitrary constant of Eq. 3.2 is removed and the units converted from energy per mole to pressure units – those favoured by physiologists since the discovery of osmotic pressure. More details of the derivation of the formulae can be found in Nobel (2005).
3.3.3
Osmosis and colligative properties
Solute molecules interact with water to lower its free energy. The effect of a solute in lowering the free energy of water is easily demonstrated using a simple osmometer (Figure 3.1). Here, a concentrated solution is contained within a thistle funnel by a semipermeable membrane and then immersed in water. Water flows from the high potential in the surrounding water (0 MPa) into the solution until the increase in pressure, represented by the height of the water column, raises the free energy of the solution to that of the pure water surrounding the membrane. At this point there is no longer a gradient in free energy and net water movement ceases. At equilibrium, the effect of the positive pressure developed by the height of the water column (turgor
Osmotic pressure Solution Semipermeable membrane Pure water
Figure 3.1 Osmosis and the generation of osmotic pressure. A solution is separated from pure water by a semipermeable membrane: solute molecules represented by the single sphere are unable to cross the membrane. There is a net flux of water molecules (three connected spheres) across the membrane until the water potential in the solution increases to 0 MPa, due to the increase in pressure – equivalent to the head of water (osmotic pressure).
34
PLANT SOLUTE TRANSPORT
pressure in a cell) is equal and opposite to that of the solute in lowering of free energy. Such a situation arises for a membrane that is impermeable to the solute – that is a perfect semipermeable membrane (see Section 3.5 below). Equation 3.4 includes a term , the osmotic pressure (= −(RT/V¯w ) ln aw = −π ), that depends on the activity of water. If solute and solvent behave ideally, the osmotic pressure can be expressed in terms of the concentration of a solute (or solutes). Under these conditions: = RTcs
(3.6)
where c s is the osmolality of the solution (a 1 osmolal solution contains 1 mole of osmotically active particles per kilogram of water). Here the concentration is expressed per unit mass of water (the molal scale) rather than the more commonly used basis of a litre of solution (molar scale): molality does not change with temperature and pressure, as mass is independent of these variables. For dilute solutions of low molecular weight solutes, molal and molar concentrations are similar. Above a concentration of about 0.2 M, the two scales diverge and increasingly so, the higher molecular weight of the solute. So far, the membrane has been considered as effecting a perfect separation between solvent (water) and solute. However, where solute passes through the membrane to some degree, the effective osmotic pressure is reduced. It is easy to imagine the two extremes – a perfectly semipermeable membrane, where all the solute molecules are reflected by the membrane, and a completely permeable membrane, where the solutes pass through the membrane. In the latter case, there would be no osmotic pressure. Membranes can vary in the proportion of solute reflected and can be characterised by their ‘reflection coefficient’ for a given solute. This is the ratio of the effective osmotic pressure to the theoretical osmotic pressure given by Eq. 3.6 (see also Section 3.6). The ability of solutes to change the free energy of water means that a number of properties of water change on addition of a solute, for example the vapour pressure, the freezing point and the boiling point as well as the osmotic pressure. These are the so-called colligative properties of solutions, and provided there are no large solute– solute interactions, there is a linear relationship between solute concentration and solution property. For example, the partial pressure of water vapour in equilibrium with a solution is linearly related to the mole fraction of water in the solution (Raoult’s law). The mole fraction is the ratio of number of moles of water divided by the total number of moles of water plus solute in the solution. The relationship holds to higher concentrations when expressed on the molal (that is per kilogram of solvent) rather than on the molar (per litre of solution) basis.
3.4
Cell water relations
In terms of their water relations, cells are complex in that they have two semipermeable membranes (plasma membrane and tonoplast) plus small organelles embedded in their cytoplasm (the chloroplasts, mitochondria and microbodies, all with
THE DRIVING FORCES FOR WATER AND SOLUTE MOVEMENT
35
semipermeable membranes) and a cell wall composed of a water permeable matrix of complex carbohydrates and proteins. In spite of this complexity, cells do behave as osmometers and so when in equilibrium with water outside (o ), their internal (i ) water potential will tend to zero and wo = 0 = wi = p + π + g whence: −p = π + g
(3.7)
For a cell, the gravitational potential has little influence on its water relations. G can be calculated from the equation: G =
m w gh V¯w
(3.8)
where m w is mass per mole (18.016 g mol−1 ), g is the acceleration due to gravity (9.8 m s−2 ), h is the vertical height in m and V¯w is the partial molal volume (1.8 × 10−5 m3 mol−1 ). Since the value of G changes by 9.8 kPa m−1 or approxi∗ mately 0.01 MPa m−1 , this is too small a value to influence the water potential on the dimensions of cells (μm). So, at equilibrium in water: –p = π
(3.9)
It is the restraining cell wall that leads to the development of positive turgor pressures within cells. Turgor pressures can be measured directly with a pressure probe (H¨usken et al., 1978), giving values that range from 20 to 800 kPa (see, e.g., Clipson et al., 1985); values are quite substantial, especially when compared with the pressure of familiar items such as car tyres (about 200 kPa). The turgor pressure within cells can be modulated by solutes accumulating within the matrix of the cell walls, altering its water potential (Clipson et al., 1985; James et al., 2006).
3.5
Water movement
The measurement of water movement through the soil–plant–atmosphere continuum is not a trivial matter. If a plant is contained in a pot or a lysimeter (a container buried in soil), then water movement can be measured by changes in weight. For trees or tracts of vegetation weighing is only rarely possible (see, e.g., http://www.ars.usda.gov/Aboutus/docs.htm?docid=8680), but evaporation can be estimated using micrometeorological methods (see, e.g., Jones, 1992). However it is measured, the quantity of water moving through a plant will depend upon the size ∗ Per
metre of vertical height, the gravitational potential changes by 0.018016 × 9.8 × 1 (kg mol−1 ) × (m s−2 ) × (m) or kg m2 s−2 mol−1 or J mol−1 . To convert this to pressure units, divide by the partial molal volume V¯w , which is 1.8 × 10−5 m3 mol−1 , viz. (1.8016 × 9.8 × 10−2 )/(1.8× 10−5 ) = 9.8 × 103 (J mol−1 ) × (m−3 mol) or J m−3 . Since a J is an N m, a J m−3 is the same as an N m−2 or a Pa.
36
PLANT SOLUTE TRANSPORT
Table 3.1 Representative water potentials in the soil–plant–atmosphere system Component
Potential (MPa)
Wet soil Root Shoot Atmoshere 75% rh Atmosphere 50% rh
−0.1 −0.2 −0.5 −38.9a −93.6a
a
The relationship between the water potential of water vapour in the atmosphere and the relative humidity is given by: rh RT ln w = (3.10) 100 V¯w
where rh is the relative humidity (%), R is the gas constant (8.314 J mol−1 deg−1 ), T is the temperature (K) and V¯w is the partial molal volume of water (1.805 × 10−5 m3 mol−1 at 20◦ C).
of the plant; a large tree will evaporate more water per unit time than a small plant of arabidopsis. Consequently, it is conventional to calculate flow rates or fluxes on the basis of the area of transport – the units are commonly g m−2 s−1 or mol m−2 s−1 or, for a volume flux, m3 m−2 s−1 (note that this is formally equivalent to a velocity). The driving force for this water movement is the difference in free energy between liquid water in the soil and water vapour in the atmosphere. In the soil–plant–atmosphere system, the water potential in the soil ranges from close to zero in wet soil to rather negative values (perhaps as low as −2.0 MPa, beyond the permanent wilting point for most plants) in dry soils (with a moisture content of 10–15%). The water potential of an atmosphere with 50% relative humidity is −93.6 MPa (Table 3.1; Eq. 3.10). So, here is the major driving force for water movement through the system – the difference in water potential between a high value in the soil, of around −0.5 to –1 MPa, to a low value of about −50 MPa or less in the atmosphere. This is the overall driving force, a large difference in free energy between liquid water in the soil and water vapour in the atmosphere. The movement of water through the soil–plant–atmosphere system has been likened to an electrical circuit – with a sequence of driving forces and of resistances (Figure 3.2; van den Honert, 1948). As in Ohm’s law, fluxes (current in the case of electrical circuits) are proportional to the driving force for movement (a difference in voltage in the case of Ohm’s law) divided by the resistance – or multiplied by the conductivity. These resistances are located in the soil, in the roots, the xylem, the leaves and in evaporation to the atmosphere. The relationship between flux and driving force can be expressed in the following way:
ψw Rw = w L w
JVw =
(3.11a)
JVw
(3.11b)
where JVw is the volume flux of water expressed per unit of area over which the flux occurs (in m3 m−2 s−1 ), L w is a water conductivity coefficient and R w is a resistance to water flow. To calculate the total flux, JVw must be multiplied by the area A.
37
THE DRIVING FORCES FOR WATER AND SOLUTE MOVEMENT
Ψw
Atmospheric water potential
Ra
Atmospheric resistance
a
Ψw
Leaf water potential
Rx
Xylem resistance
l
Ψw
Root water potential
Rr
Root resistance
r
s
Ψw
Soil water potential
Figure 3.2 Various segments of the pathway of water movement in the soil–plant–atmosphere system, represented by resistances and potentials.
Using this relationship it is possible to calculate the relative resistances (measured in MPa s m−3 ; the reciprocal of conductance) in the various segments of the flux of water from soil to atmosphere. It is assumed that the majority of the water entering through the roots passes out through the leaves (only 2% is ‘consumed’ in growth). Hence, for a plant with a root system of area Aroot , leaf area Aleaf and volume flux J v , the quantity of water entering equals that leaving, or Aroot Jvin = Aleaf Jvout . Since the system can be divided into separate segments, each obeying the same rule that what enters one segment leaves to enter the next segment (Figure 3.2), flux through the whole system must equal that through the any segment (e.g. the xylem). Hence: xylem
JVroot Aroot =
w
− wroot
Rroot
atmosphere
x yl
= JV A x yl =
wroot − wleaf leaf − w = w Rxylem Ratmosphere
(3.12) Inserting representative figures from Table 3.1 and rearranging to solve for R atmosphere : atmosphere
Ratmosphere = =
wleaf − w wshoot − wleaf
(Rroot + Rxylem )
−0.5 − (−38.9) (Rroot + Rxylem ) = 113(Rroot + Rxylem ) −0.2 − (−0.5)
This simple calculation illustrates a very important aspect of flow through the continuum that the resistance in the gas phase is significantly greater than the sum of the other plant resistances. R atmosphere is a consequence of the low water permeability of the leaf cuticle, and hence the control of water loss by the (much smaller) stomatal pore area. The calculation is, however, a simplification and if we are to understand
38
PLANT SOLUTE TRANSPORT
the system as a whole, we need to know precisely what drives water movement through the different parts of the system and what constitutes a resistance to flow. In understanding the soil–plant–atmosphere system, it is crucial to realise that the driving forces differ in different parts of the system: in soils, water movement depends on height in the soil profile (e.g. gravity) and on the forces that bind water in the small capillaries that exists between soil particles. In plants, water can, again, move through a matrix composed of small capillaries – the cell walls – or in small tubes (the xylem and phloem) where bulk flow of water occurs under pressure gradients. Between cells, however, water movement depends on the properties of the membranes, which are differentially permeable to water and solutes (the membranes are semipermeable).
3.5.1
Water movement through the soil
Soils are composed of particles that can differ greatly in size – from clays whose particles are less than 2 μm in diameter to sands where the particles can be up to 2 mm in diameter. The water potential of water in a soil is influenced primarily by the height of the water in the soil profile and, as the soil dries, by the negative pressures that develop in menisci formed as air enters drying soils. Dissolved solutes do not create a driving force for water in soils, as soils are not osmotic systems – there are no semipermeable membranes. Any influence of solutes is largely through their effect on the soil structure, which alters the permeability (conductivity) of the soil to water. In wet soils (the ‘wet end’ of soil moisture is measured as field capacity, the water content at which downward drainage under gravity materially ceases) the spaces between soil particles are occupied by water molecules, and so the water potential is determined by the gravitational potential. As the soil dries, however, water is withdrawn into capillaries between the soil particles and air–water interfaces develop. The development of these menisci alters the hydrostatic pressure (P) in the water since: 1 1 (3.13) + P = −σ r1 r2 where σ is the surface tension of water and r 1 and r 2 are two principal radii of curvature of the meniscus (see also Figure 9.4). As soils dry, water retreats into ever smaller capillaries, and so the tension in the water increases and the soil water potential becomes increasingly negative. Movement of water through soils depends on the driving force – the gradient of water potential and the conductivity of the soil to water (cf. Eq. 3.11). So the volume of solution flowing per unit area per second (J v ) depends on the gradient of soil water potential with distance, viz.: Jv = −L s
d s dx
(3.14)
THE DRIVING FORCES FOR WATER AND SOLUTE MOVEMENT
39
where the soil water potential s is given by s = ps + Gs – the sum of the pressure potential in the soil (here a tension; see Eq. 3.13) and the gravitational potential (remember there is no osmotic component as there is no semipermeable membrane). In wet soils, s is dominated by Gs and in dry soils by ps . The relationship between the flux of water through a soil and the driving force is termed Darcy’s law (after Henri Darcy, who discovered the relationship towards the end of the nineteenth century). Darcy’s law is a little more complex than might first be apparent, as the hydraulic conductivity of the soil varies with the water content – and declines dramatically as the soil dries. As a consequence, dry soil has an extremely low conductivity to water and provides one reason why root growth is so important to a plant for obtaining water. Once water reaches a root, its initial contact is with the cell walls of the epidermal cells: these represent a similar medium to the soil for water movement.
3.5.2
Water in cell walls
Cell walls are composed of a matrix of cellulose molecules impregnated with a variety of other more or less complex polymers. The pores within cell walls (about 5–30 nm) are, however, smaller than those found in soils. As in the soil, water will be held in microcapillaries and large tensions can arise as cell walls dry, due to the effects of surface tension at air–water interfaces (Figure 9.4). Where the space in the cell wall has a diameter of 10 nm, the tension could be as great as −29 MPa at 20◦ C (Nobel, 2005). In practice, however, large tensions do not develop when water is available in neighbouring cells, as water moves from those cells into the microcapillaries so that they are virtually filled – the tensions that do develop depend on the contact angle between water and the cell wall as well as the radius of the pore (Nobel, 2005).
3.5.3
Water movement across a root (or leaf)
Roots provide a number of possible pathways for the radial movement of water as well as for its longitudinal flow. The majority of radial movement occurs from the soil to the central vascular tissue and in regions of the root where root hairs are prevalent. Water can, potentially, move through the cell walls (apoplastic movement) or within cells (a symplastic route where water flows from cell to cell via plasmodesmata) or a combination of the two, whereby water moves from cell to cell across the root (Steudle and Peterson, 1998). The balance of water movement through the various pathways depends on the resistances to flow, which can change with flow rate and the developmental state of the root with respect to barriers to radial movement of water (Steudle and Peterson, 1998). The apoplastic pathway is potentially dangerous as water movement could carry solutes into tissues without any regulation by living cells. In practice, plant roots have developed barriers to the radial movement of solutes. These barriers are comprised of insoluble bands of suberin (Casparian bands) that are present in the walls of specialised cells that make up the exodermis and the endodermis (cf. Schreiber et al.,
40
PLANT SOLUTE TRANSPORT
2005). These barriers not only prevent unwanted ingress of solutes, but perhaps, more importantly, prevent the relatively concentrated solution in the xylem leaking from the root to the soil. The Casparian bands force water (plus solutes) into the symplastic pathway, except where exodermis or endodermis is breached either by the presence of passage cells or by damage caused, presumably, by the growth of lateral roots through the barrier (see Ranathunge et al., 2005). Where this occurs the so-called ‘bypass flow’ can constitute a significant pathway for the movement of ions from the external medium to the shoots, the best investigated example of which is rice (Yeo et al., 1987, and Chapter 14).
3.5.4
Water movement through the xylem and phloem
Apart from radial movement, water also moves longitudinally through the roots of plants, in the phloem and xylem; both are pressure-driven flows that can be described by the Poiseulle equation: Jv = −
r2 δP 8η δx
(3.15)
where J v is a volume flux with units of m3 m−2 s−1 , r is the radius of the tube, η is the viscosity (Pa s) and δP/δx is the pressure gradient under which flow takes place. The negative sign indicates that flow takes place in the direction of decreasing pressure. The xylem is an apoplastic pathway where water flows from relatively higher pressure in the roots to relatively lower pressure in the leaves: the water column is, however, under tension (see Chapter 9). The phloem, on the other hand, is a symplastic pathway; again water flow is pressure driven, but the pressures are positive, with relatively high values in the source regions and relatively lower values at the sinks, wherever they may be (Chapter 10). The xylem (except for root pressure exudation) operates under negative hydrostatic pressure, while the phloem operates under positive hydrostatic pressure.
3.6
Solute movement
The movement of solutes in plants can take place via the bulk flow of solutions, as in the xylem and phloem, or via specific transporters, where a protein is involved in the flux of a specific substance or group of substances. For neutral solutes the same driving forces occur as for water: the solute moves down gradients of its free energy (chemical potential) determined largely by gradients of activity (concentration). The effects of pressure (Nobel, 2005) and gravity are trivial in the context of cellular solute movements. For ions, however, there is an additional force that plays a very important role in their net movement – electric charge. As ions are charged particles, their movement is influenced by the presence of electric fields.
41
THE DRIVING FORCES FOR WATER AND SOLUTE MOVEMENT
3.6.1
Chemical, electrical and electrochemical potentials and gradients
Unlike the case with water, differences in electrical potential (E) have a major influence on the movement of ions as ions carry a net charge (z, positive for cations and negative for anions; the charge carried by 1 mole of protons is 9.65 × 104 C or Faraday’s constant). The chemical potential of an ion j is given by: μ j = μ∗j + RT ln a j + z j FE
(3.16)
where z is the valency, F is the Faraday and E is the electrical potential (cf. Eq. 3.2 for water).
3.6.2
Diffusion – Fick’s first law
Although in the phloem and the xylem solutes move in a mass flow of solution, in many situations the movement of solutes depends upon diffusion. Diffusion results from random movements of solute molecules. Where there are differences in concentration between two sites, there is a greater statistical probability of movement from a region of high concentration to a region of low concentration as there are more molecules in the high concentration region than in the region of low concentration. The flux (J) of a solute j (viz. jj , the quantity of j crossing a unit area per unit time e.g. mol m−2 s−1 ) is directly proportional to the concentration gradient of j, viz.: δc j (3.17) δx where δc j / δx is the concentration gradient of j along the distance axis x and Dj is the diffusion coefficient of j (a coefficient rather than a constant as the value varies with temperature and concentration of j). This relationship is commonly known as Fick’s first law of diffusion, after its discoverer. Diffusion coefficients of common solutes in water at 25◦ C have different values, examples of which are 0.52 × 10−9 m2 s−1 for sucrose and 1.9 × 10−9 m2 s−1 for K+ (with Cl− ). It is informative to note that the time taken for a little over a third (36.8%, 1/e) of a population of K+ ions to diffuse across a cell (50 μm) is 0.6 s, while the time taken for the same proportion of these K+ molecules to diffuse over the distance of 1 m would be about 8 years (Nobel, 2005). Diffusion is not a process suited to long-distance transport in biological systems. In cells, there is a bulk movement of the cytoplasm, known as cytoplasmic streaming, which results in mass movement of solution and so reduces the time taken for solutes to move between parts of a cell. Where diffusion takes place across a barrier, such as a membrane or cell wall, the concentration gradient −δc j /δx can be represented by the difference in average concentration across the barrier divided by its effective width, i.e. the difference of concentration between the outside (o ) and the inside (i ) across the distance x, viz. (coj − cij )/ x. The distance over which solutes diffuse is the width of the barrier, plus any unstirred layers on either side of that barrier (layers where, because of friction between the barrier and the bulk solution, the bulk flow of solution is reduced to zero). Unstirred layer can be greater in width than the thickness of the barrier itself. Because the barrier, the membrane or cell wall, is not of the same chemical J j = −D j
42
PLANT SOLUTE TRANSPORT
composition as the bulk solution, the concentration of solute in the barrier depends on the partition between the two phases. This means the effective concentration difference across the barrier is K j coj − cij , where K j is a partition coefficient, a dimensionless ratio of the concentration of the solute in the barrier and in an aqueous solution. The flux across the membrane is given by: (3.18) J j = P j coj − cij where the permeability coefficient Pj is: Pj =
Dj K j
x
(3.19)
The permeability coefficient for K+ in a cell membrane is about 10−9 m s−1 , typical of small charged ions. In cell walls, ions will diffuse through aqueous channels, but these are relatively small in proportion to the unit area over which diffusion is occurring. For a cell wall whose thickness is 1 μm, the permeability coefficient would be 1 × 10−3 m s−1 , considerably greater than that of a cell membrane. However, the permeability coefficient of the same K+ ion in an unstirred layer of 30 μm would be 3 × 10−5 m s−1 , lower than that for the cell wall per se. For larger solutes, whose molecular dimensions are similar to the pore size in the walls, the walls can act as a ‘membrane’ with a reflection coefficient (see Section 3.2.2) less than 1 and osmotic water withdrawal can occur across the walls, as has been demonstrated for tissues where the cells have been disrupted by freezing and thawing (Flowers and Dessimoni Pinto, 1970). The limiting size of molecules that cross cell walls is 3.5–5.2 nm according to species (Carpita et al., 1979). Although the values of Dj , K j and x may be uncertain, Pj is a readily measurable quantity. Provided the flux of a substance can be measured and the internal and external concentrations are known, Pj can be calculated. The chief problem in estimating permeability coefficients is in obtaining the values of coj and cij at the membrane surface, since it is only possible to measure these in the solution on either side of the membrane. The boundary layer, in which the concentration varies with distance from the membrane, confounds estimation of the actual concentrations at the membrane surfaces themselves. The boundary layer cannot be entirely removed by rapid stirring of the solution, especially if intact plant cells are used, as this layer will be located within the cell wall where stirring is not possible. Values of Pj for small molecules such as glucose, glycerol and urea lie in the range from 0.01 to 3 × 10−9 m s−1 . It is difficult to estimate absolute permeabilities for ions, but P Na /P K is about 0.2 and P Cl /P K , 0.003 (see Nobel, 2005).
3.6.3
Diffusion potential
If a salt, such as potassium chloride, is added as a solid to a beaker of water, the ions dissolve in the water and a concentration gradient is established within the beaker, which leads to the diffusion of potassium and chloride ions from high to low
THE DRIVING FORCES FOR WATER AND SOLUTE MOVEMENT
43
concentration. If the ions are of different sizes, they will have different mobilities in the solution and diffuse at a slightly different speeds so that a difference in charge develops, which is known as a diffusion potential. In a solution, this occurs over microscopic distances. Such diffusion potentials arise where microcapillaries filled with concentrated electrolyte as a conductor are inserted into cells to determine the potential across a membrane (cf. Section 2.6.3). For an electrode filled with 3 M KCl and inserted into a cell, the diffusion potential is about −2 mV.
3.6.4
Nernst potential
If a cell is placed in a dilute solution of a salt and allowed to equilibrate such that the diffusion of ions into the cell balances the diffusion out of the cell, there is no net movement of ions and the electrochemical potential of, say, K+ inside is equal to that outside the cell. In general terms, at equilibrium, μoj = μij , whence, expanding using Eq. 3.16: μ∗j + RT ln a oj + z j FE o = μ∗j + RT ln a ij + z j FE i
(3.20)
The potential at equilibrium E Nj (named after Nernst, who first derived this relationship) is given by E Nj = E i − E o . Rearranging Eq. 3.20, a oj z j F(E i − E o ) = RT ln a oj − ln a ij = RT ln i aj whence E Nj = E i − E o =
a oj a oj RT RT ln i = 2.303 log i z j F aj zjF aj
At 25◦ C for a monovalent cation, this reduces to: E Nj = 59.2 log
co ci
(3.21)
Equation 3.21 demonstrates the poise between electrical potential and chemical concentration in systems at equilibrium: a difference in concentration of a monovalent cation of tenfold across a membrane is balanced by a difference in potential of 59 mV when the temperature is 25◦ C (at 20◦ C, the balancing potential is about 58 mV).
3.6.5
Donnan systems
Cell walls offer yet another level of complexity to the diffusion of ions in that walls carry a net negative charge. In such a system, at equilibrium, the Nernst equation can be applied, but here the concentration of anions and cations is different. For example, with K+ at a concentration (and activity) of 1 mM and Ca2+ at 0.5 mM outside a cell and with a cell wall with a concentration of fixed anions equivalent to 100 mM, it is possible to calculate the concentration of potassium and calcium ions
44
PLANT SOLUTE TRANSPORT
in the cell wall and the difference in potential between the outside solution and the cell wall (Briggs et al., 1961): Outside
Cell wall
Cytoplasm
Vacuole
K+ (mM)
1
9.5
150
50
Ca2+
0.5
45
–
–
(mM)
EN(K) (mV)
0
EN(K) (mV)
0
EN(K) (mV)
0
−57 −126 −100
In plant cells, it is likely that the fixed negative charges in the cell walls are largely occupied by calcium ions.
3.6.6
Goldmann equation
For a plant membrane, there are many ions that diffuse across it at any given time. However, for the most part, the fluxes are dominated by the movements of K+ , Na+ and Cl− (and H+ , but as we shall see H+ is pumped and therefore does not contribute to the diffusion potential). In this case it is possible to deduce (see, e.g., Nobel, 2005) that the measured potential across the membrane (E M ) is given by: o i PK cKo + PNa cNa + PCl cCl E M = RT ln (3.22) i o PK cKi + PNa cNa + PCl cCl where P represents the permeability coefficients and c the concentrations. This is the Goldman or Goldman–Hodgkin–Katz equation.
3.7
Coupling of water and solute fluxes
Classical thermodynamics, the basis of most of the equations used so far in this chapter, deals mainly with the study of closed systems – systems that exchange energy but no matter through their boundaries. Plants exchange both energy and matter with their environment and are ‘open systems’. The methods of classical thermodynamics have been developed so that they may be applied to open biological systems providing new insights into the linked fluxes of solutes and water in both plants and animals. Irreversible thermodynamics applies the parameters used in classical thermodynamics to non-equilibrium conditions, i.e. to situations where there is a net flux of a substance, although the system must be close to equilibrium (Prigogine, 1961). We have already seen how the flux of a substance such as water can be described by an equation relating the driving force and the conductivity. For example, water
THE DRIVING FORCES FOR WATER AND SOLUTE MOVEMENT
45
movement through a plant can be described by Eq. 3.11 (JVw = w L). Here, the volume flux of water is determined simply by the gradient of water potential. However, the movement of water is also affected by the movement of solutes and irreversible thermodynamics describes the flux of a substance in terms of all the forces (X, from 1 to n) that act upon that substance. So, the flux J of a substance j is given by: J j = L j1 X 1 + L j2 X 2 + · · · + L jn X n
(3.23)
where L is a coefficient. For fluxes of water (J w ) and solute (J s) , the equations reduce to: Jw = L ww μw + L ws μs
(3.24)
Js = L sw μw + L ss μs
(3.25)
and
These equations involve two fluxes, two driving forces and four coefficients, known as Onsager coefficients (after the Nobel Prize winner of 1968); the number of coefficients is, in practice, 3 as it can be shown that L ws = L sw . The development of these equations to describe fluxes of total volume (water and solute) was described by Kedem and Katchalsky (1958) and leads to the following relationships (Nobel, 2005) between the volume flux (J V ), the differences between the mean velocities of solute and water (J D ) and the differences in hydrostatic pressure ( P) and turgor pressure ( ) across a membrane: JV = L P P + L PD JD = L DP P + L D
(3.26) (3.27)
where L P , L PD , L DP and L D are the Onsager coefficients and L P is the hydraulic conductivity of the membrane. These coefficients have been used to define an important parameter, the reflection coefficient σ (=− LLDPP =− LLPDP ). This can be seen as the proportion of solute molecules ‘reflected’ by the membrane: for a perfect semipermeable membrane, σ = 1; for a membrane that is completely permeable to the solute (and so would not generate any osmotic pressure), σ = 0. The application of irreversible thermodynamics has generated insights into transport processes beyond those gained from the use of empirical relationships and classical thermodynamics.
References Briggs, G.E., Hope, A.B. and Robertson, R.N. (1961) Electrolytes and Plant Cells. Blackwell Scientific Publications, Oxford. Carpita, N., Subularse, D., Montezinos, D. and Delmer, D.P. (1979) Determination of the pore size of cell walls of living plant cells. Science 205, 1144–1147. Clipson, N.J.W., Tomos, A.D., Flowers, T.J. and Wyn Jones, R.G. (1985) Salt tolerance in the halophyte Suaeda maritima (L.) Dum. The maintenance of turgor pressure and water potential gradients in plants growing at different salinities. Planta 165, 392–396.
46
PLANT SOLUTE TRANSPORT
Flowers, T.J. and Dessimoni Pinto, C.M. (1970) The effects of water deficits on slices of beetroot and potato tissue. I: Tissue–water relationships. Journal of Experimental Botany 21, 746–753. H¨usken, D., Steudle, E. and Zimmermann, U. (1978) Pressure probe technique for measuring water relations of cells in higher plants. Plant Physiology 61, 158–163. James, J.J., Alder, N.N., Muhling, K.H., et al (2006) High apoplastic solute concentrations in leaves alter water relations of the halophytic shrub, Sarcobatus vermiculatus. Journal of Experimental Botany 57, 139–147. Jones, H.G. (1992) Plants and Microclimate A Quantitative Approach to Environmental Plant Physiology. Cambridge University Press, Cambridge, UK. Kedem, O., Katchalsky, A. (1958) Thermodynamic analysis of the permeability of biological membranes to nonelectrolytes. Biochimica et Biophysica Acta 27, 229–246. Munns, R. (2005) Genes and salt tolerance: bringing them together. New Phytologist 167, 645–663. Nobel, P. (2005) Physiochemical and Environmental Plant Physiology. Elsevier Academic Press, Amsterdam. Prigogine, I. (1961) Introduction to Thermodynamics of Irreversible Processes. Interscience Publishers, New York, p. 119. Ranathunge, K., Steudle, E. and Lafitte, R. (2005) Blockage of apoplastic bypass-flow of water in rice roots by insoluble salt precipitates analogous to a Pfeffer cell. Plant Cell and Environment 28, 121–133. Schreiber, L., Franke, R., Hartmann, K.D., Ranathunge, K. and Steudle, E. (2005) The chemical composition of suberin in apoplastic barriers affects radial hydraulic conductivity differently in the roots of rice (Oryza sativa L. cv. IR64) and corn (Zea mays L. cv. Helix). Journal of Experimental Botany 56, 1427–1436. Steudle, E. and Peterson, C.A. (1998) How does water get through roots? Journal of Experimental Botany 49, 775–788. van den Honert, T.H. (1948) Water transport as a catenary process. Discussions of the Faraday Society 3, 146–153. Yeo, A.R., Yeo, M.E. and Flowers, T.J. (1987) The contribution of an apoplastic pathway to sodium uptake by rice roots in saline conditions. Journal of Experimental Botany 38, 1141–1153.
4 Membrane structure and the study of solute transport across plant membranes Matthew Gilliham
4.1
Introduction
The transport of solutes across membranes is integral to a vast array of biological processes from plant nutrition to cell signalling, from symbiotic- and plant–pathogen interactions to cell polarity and plant development. Therefore, the number of plant scientists with a potential remit for exploring particular aspects of membranes and their transport systems is great. Numerous detailed texts exist concerning the function, structure and properties of plant membranes (see below), the transport proteins within membranes (see Chapters 5 and 6) and the techniques used to study either. This chapter provides a brief overview of available and emerging techniques, what they can reveal, their advantages and limitations and how they can be used in combination to demonstrate definitively certain transport processes within a plant. Readers interested in a particular technique are referred to citations within the text for further details, including in-depth methodologies. As the nature of the techniques available for the study of solute transport across membranes is dependent upon the properties and structure of plant membranes, a summary of their major features is provided below as context.
4.2 4.2.1
Plant membranes Plant membrane composition
All eukaryotic organisms have lipid- and protein-rich bilayers that delineate individual cells and compartmentalise intracellular regions into distinct organelles or other membrane-bound subcompartments. These membranes both form and provide an essential barrier between functional domains and their external environment acting as major sensors for environmental perception and stress response (e.g. cold, Uemura et al., 2006; salt, Zhu et al., 2000). In addition, plant membranes are key regulators of cellular homeostasis, platforms for metabolic-energy transduction (e.g. mitochondria or chloroplast membranes) and a dynamic matrix from which intracellular signals are released (e.g. Wang, 2005) – topics that will not be covered in any great detail here. Plants contain multiple membrane systems (∼20) that have been classified in terms of their form, composition and function (Figure 4.1). The plasma membrane
48
Membrane
PLANT SOLUTE TRANSPORT Distinctive transport proteins
Main roles
Nuclear envelope
RNA/protein transport
Endoplasmic reticulum
Synthesising, sorting and processing proteins
Golgi
Protein, vesicle trafficking
trans-Golgi network
Protein, vesicle trafficking
Partially coated reticulum
Protein, vesicle trafficking
Multivesicular body
Protein, vesicle trafficking
Secretory vesicle
Protein, vesicle trafficking
Plasma membrane
Signalling, cell wall synthesis, homeostasis
Endocytic vesicle
Protein, vesicle trafficking
Transport vesicle
Protein, vesicle trafficking
Tonoplast Storage vacuole Lytic Undefined
Storage of metabolites and toxins, homeostasis, pigmentation Lysis
Mitochondria
ATP synthesis
P-type H+ -ATPase, PIP1
TIPs, V-PPase TIP2 (α-TIP) TIP1 (λ -TIP) TIP3 (δ-TIP) not TIP1/2
Inner
ATP/ADP translocator
Outer
Porins
Chloroplast envelope
Connectivity/ Trafficking
Photosynthesis
Inner
VDAC
Outer
Porin P-type Cu2+ -ATPase
Thylakoid
Symbiotic membrane, e.g. symbiosome
N2 fixation
Perioxisomes
Lipid mobilisation, glycolate pathway, perioxidation
NOD26-like
Figure 4.1 Major plant membranes, their roles, major transport proteins and connectivity. —, connection through each membrane; ---, connection between indicated compartments.
(PM; sometimes referred to as the plasmalemma) forms the boundary around a cell. However, the connectivity of intracellular membrane systems, through plasmodesmata, to adjacent cells (see also Section 8.5.1) has led some to question this classical notion, viewing plants instead as supracellular organisms (Baluska et al., 2004). Regardless of views on this matter, as membrane cannot form de novo, the trafficking and connectivity between membrane systems facilitates growth, maintains and changes their composition and affords plant ‘cells’ a dynamic and responsive
SOLUTE TRANSPORT ACROSS PLANT MEMBRANES
49
network primed for survival. Although membrane systems are heterogeneous in their exact constituents, the mass of the general building blocks – lipids, proteins and carbohydrates – is maintained at a ratio of approximately 40:40:20 (Staehelin and Newcomb, 2000). However, it is the specific properties of these individual components that allow different membranes to perform their specialised functions. Glycerophospholipids (e.g. phosphatidylethanolamine [PE], phosphatidylserine [PS], phosphatidylcholine [PC], phosphatidylinositol [PI], phosphatidylglycerol [PG] and cardiolipin [CL]; see www.lipidlibrary.co.uk) constitute the most common class of lipids in the PM and mitochondria and also form their major structural components. These glycolipids consist of two hydrophobic hydrocarbon (fatty acid) tails (14–24 C), with at least one tail having one or more cis double bonds. The degree to which tails are saturated affects lipid packing within, and consequently the shape of, the membrane. Esterified to the fatty acid tails are charged polar (hydrophilic) head groups. The high percentage of lipids present with anionic head groups (e.g. PE, PI, PC) gives the PM a relatively high negative surface charge compared to other membranes, a charge that can be used to aid its isolation (see Section 4.5.1). Chloroplast membranes, in contrast to mitochondrial and plasmalemmal membranes, contain glycoglycerol lipids [e.g. mono- (MGDG) and di-galactosylglycerides (DGDG)], rare in most non-photosynthetic membranes, as their major structural lipid components. PS and CL are the distinctive lipids of the mitochondria but in phosphatedeprived conditions, presumably as a phosphate-conservation mechanism, DGDG content increases through direct transfer from chloroplasts (Jouhet et al., 2004). It has been hypothesised that it is the asymmetrical arrangement of MGDG and DGDG, on the inner and outer leaflets respectively, of the thylakoid membrane that allows it to become highly folded and tightly packed, maximising photosynthetic efficiency (Murphy, 1982). PG is also present in anomalously high proportions within the thylakoid membranes where it has been shown to be essential for chloroplast differentiation and autotrophic growth (Hagio et al., 2002). Other classes of membrane lipids include sterols (e.g. sitosterol and 24methylcholesterol) and glycosphingolipids (e.g. glycosylceramide). Whereas sterols have been implicated in the regulation of membrane fluidity and glycosphingolipids are thought to have roles in cell signalling (such as abscisic acid [ABA] signalling; Ng et al., 2001), it is likely that the roles of these two lipid classes may be intimately linked (see Sections 4.2.2 and 14.12). Phosphatidic acid, also involved in ABA signalling, is produced by hydrolysis of membrane lipids by phospholipase D and has been implicated in important signalling pathways such as root growth and programmed cell death (Wang, 2005). The amphipathic (amphiphilic) nature of lipid molecules, which concomitantly form continuous bilayers, generates a selectively permeable barrier around anything membrane-bound and facilitates the potential formation of large solute concentration gradients across the bilayer. Only highly lipid-soluble (e.g. ethanol, glycerol), small non-polar (e.g. O 2 , CO 2 ) and some small polar (e.g. H 2 O, urea) molecules are able to traverse the lipid bilayer passively and directly (Chapter 5). Proteins embedded within lipid bilayers can create additional transport pathways for lipid-impermeable substances or augment transport of those that are lipid-permeable (e.g. aquaporins; Luu and Maurel, 2005). Whilst integral membrane proteins are irreversibly bound
50
PLANT SOLUTE TRANSPORT
and their presence controlled by cytotic events, both peripheral (linked by salt bridges to other proteins or lipids) and lipid-linked proteins (e.g. fatty-acid-, prenyl-groupand sterol-linked) can form reversible associations with the membrane. Proteins can form a direct transport corridor across membranes through pumps, channels, carriers (see Section 5.1.2) or plamodesmata (see also Section 8.5) and control vesicle trafficking or regulate such processes indirectly. The protein constituents of the various membranes within plants can also be distinctive (Figure 4.1) and are therefore useful attribute for identifying particular tissue fractions (see Section 4.3.2).
4.2.2
Plant membrane structure
Membrane composition (and also structure) varies depending on species, cell type and plant physiological address (i.e. the plant’s current status as a result of its physiological and developmental history). For instance, the protein complement and transport properties (and functions) of the PM of xylem parenchyma cells differ from that of the guard cell (e.g. Gilliham and Tester, 2005). Moreover, both the protein and lipid composition of a given membrane can alter with changes in physiological conditions. The fluidity of lipid bilayers is naturally temperature-dependent (they will undergo a liquid-crystal to gel-like phase transition as temperature increases). Upon changes in temperature, to keep membranes at an acceptable fluidity for optimal physiological function, the plant can adapt the lipid composition of its membranes. For example, to increase fluidity of membranes upon cold stress, plants can increase the percentage of unsaturated phospholipids and decrease the percentage of sphingolipids (Uemura et al., 2006; see below). The four-dimensional membrane structure is dynamic and influenced by interactions between lipids, proteins, the cytoskeleton and the cell wall (e.g. McMahon and Gallop, 2005). Insights gained through recent technological advances have found the well-documented fluid-mosaic model of a biological membrane, developed by Singer and Nicholson (1972) (see Figure 1.9; Staehelin and Newcomb, 2000), to be a useful but underdeveloped generalisation of a biological membrane (Engelman, 2005). Drawing from biological membrane studies in other organisms, together with those in plants, evidence is emerging that plant PMs, and potentially other endomembranes, resemble a mosaic of microdomains with a particular molecular composition. This is in contrast with the traditional view that membranes are ‘liquid-disordered’, with most molecules being able to freely diffuse within the membrane plane. Interactions between areas of the membrane rich in sterols (in both lipid leaflets), and sphingolipids (solely in the outer leaflet), form ‘liquid-ordered’ microdomains (Martin et al., 2005). Sphingolipids have long acyl chains that form strong and tightly packed associations, thus endowing these domains with high-melting points. As a consequence, an increase in the proportion of these ‘liquid-ordered’ over ‘liquiddisordered’ domains decreases the fluidity of the membrane. Generically referred to as ‘lipid rafts’, these detergent-resistant membrane fractions are often enriched in glycosylphosphatidylinositol-anchored polypeptides (Bhat and Panstruga, 2005). Associations of these and other proteins, promoted by sphingolipids, are believed to
SOLUTE TRANSPORT ACROSS PLANT MEMBRANES
51
form the lipid raft into a functional unit with specialised biochemical and signalling roles such as the induction of cell polarity (Fischer et al., 2004). As revealed through X-ray crystallography, it has been shown that transport proteins are more-often-than-not multimeric (e.g. T¨ornroth-Horsefield et al., 2006). Through other studies it has been demonstrated that they can in fact form functional heteromers (e.g. Dreyer et al., 1997). Regardless of their potential presence within lipid rafts, transport protein multimers are also often clustered. Furthermore, they may be in close vicinity to, or loosely associated with, other proteins within the bilayer or with those in the apoplast or symplast which may in turn affect or regulate protein-mediated solute transport activities. In addition, proteins that have large ectodomains, numerous transmembrane spanning regions or are anchored by single helices or lipidic anchors will cover significant areas of the bilayer surface and will therefore influence its structural properties. It has been suggested that lipid bilayers will also vary their thickness to accommodate protein structures (McMahon and Gallop, 2005). Specific interactions occur between lipids and proteins, with lipids acting either as co-factors or to ensure correct protein folding to guarantee membrane functionality (Valiyaveetil et al., 2002). It is therefore not surprising that changes in lipid composition and/or membrane fluidity can affect transport-protein function (e.g. the sterol-induced up-regulation of H+ -ATPase; Opekarov´a and Tanner, 2003).
4.3
Studying solute transport across plant membranes
The ‘information revolution’ spawned by the publishing of scientific journals, protocols and databases on the internet, as well as the recently sequenced and annotated genomes of multiple organisms, has provided the tools to mine data effectively and inform functional studies with unrivalled ease (see Section 4.6; Rhee et al., 2006). Rapid advances in molecular techniques have enhanced the power of many established (and some recently developed) transport assays manyfold, giving ‘traditional’ transport-based phenomenological or physiological investigations a new level of control and complexity. It has long been evident that there exists much intra-organ, -tissue, -cell and -organelle specificity in the transport properties of membranes and the molecular determinants of these differences can now start to be unravelled. Contemporary transport studies generally aim to associate a gene and a protein (or multiples of both) with a particular transport process by manipulating the transport process at the level of the gene, protein, cell and/or whole plant. As a result, the functional characterisation of transport proteins and their regulatory pathways is progressing swiftly (see the following chapters). A transport assay, as defined within the confines of this text, is any technique that can be used to elucidate a particular transport mechanism or infer the involvement of a particular transport process in plant function. There is much overlap in how general techniques can be applied, and so the remaining chapter has been divided into three main sections. Section 4.4 gives a background to most of the major transport assays with reference to their use with whole plants or semi-intact tissue; Section 4.5 describes how some of these techniques can be adapted for use with isolated
52
PLANT SOLUTE TRANSPORT
membranes and Section 4.6 summarises some of the molecular techniques that are used to identify or directly manipulate a gene or a protein to enhance transport-based assays.
4.4
Transport techniques using intact or semi-intact plant tissue
4.4.1
Plant growth
Prior to initiating experiments, plant growth conditions should be carefully considered to ensure physical and physiological compatibility with a particular transport assay. Most physiological studies are initially carried out on seedlings for ease of handling, experimental control and efficiency, although many techniques can equally be applied to more mature plants if so needed. To name a few; aerated hydroponics, aeroponics, mica-based artificial soils, saturated filter paper and vertically orientated sterile agar/phytogel plates can be used to provide easy access to the roots. These methods can also give fine control over the nutrient content of the growth medium, which should, in any case, be carefully formulated to mimic physiological situations (it should be noted that full strength Murashige and Skoog, Hoaglands and/or high sucrose will actually perturb plant growth; see Gibeaut et al., 1997, for optimised hydroponic culture). At the same time, non-soil-based media may change root architecture and transport properties (Zimmermann et al., 2000).
4.4.1.1
Solution design
It may be important to attempt to calculate (or measure) the exact composition of the growth medium, but it is imperative for that of experimental solutions. The osmotic potential or osmolality (especially if osmotically stressing the plants or dealing with protoplasts or membrane vesicles) should be set, calculated or measured using an osmometer. Electrostatic attractions between solutes will decrease solute activities (a x ; see Section 2.3), especially at high concentrations (a square bracket is commonly used to designate a concentration, viz. the concentration of x is [x]). It is also important to consider the effect of chelators and the concentration of buffering agents within solutions. For example, by increasing the level of Ca2+ buffering in the cytosol using 1,2-bis(o-aminophenoxy) ethane-N, N, N , N -tetraacetic acid at 25 mM, it is possible to completely prevent a [Ca2+ ] rise, induced by Ca2+ passage across various membranes, and therefore prevent its potential effects upon ion channel activity further downstream (Alexandre and Lassalles, 1992). GEOCHEM (Parker et al., 1987), Maxchelator® (Stanford University, California, USA) and Visual MINTEQ 2.23 (KTH, Stockholm, Sweden) are all available on the internet and can be used to calculate ion activities and buffering, although all will require users to enter additional constants for certain solutes. These calculated ionic activities can then be used to calculate the electrochemical potential in a solution or difference across a membrane, if required. Alternatively, ion/solute-selective electrodes (see Section 2.2.4) can be used to measure the activities of ions in solution (see Section 4.4.5.1).
SOLUTE TRANSPORT ACROSS PLANT MEMBRANES
53
Boundary or unstirred layers parallel to the membrane surface, which occur at any air–water–solid interface, are a diffusional barrier between the bulk solution and membrane and may be exaggerated by the presence of the cell wall. Failure to take unstirred layers into consideration may result in significant errors when measuring biophysical parameters of membranes such as solute permeability (P s ) and hydraulic conductivity (L p ) (Tyree et al., 2005). Furthermore, the electrostatic interactions of ions with the outer membrane surface charge (ψ0o ) will affect the concentration of charged species at the membrane surface compared to that of the bulk solution (Kinraide, 2004). ψ0o , which is naturally negatively charged due to surface groups, can enrich the concentration of cations or deplete the concentration of anions at the PM surface by more than tenfold relative to the bulk solution (Barber, 1980). In contrast, high ionic strength, highly charge-dense ions or a low pH will induce slightly positive values (Kinraide, 2001). Most studies ignore the contribution of ψ0o to E m although it has been proposed that it could influence many flux parameters previously thought to be exclusively the result of direct ion interactions with transport proteins such as substrate saturation, rectification, inhibition by non-transported ions and voltage gating (Kinraide, 2001; see Chapter 5). However, as the ψ0o is subsumed within the total electrochemical potential between outside and inside, it is only important to calculate it if it is thought that the transporter (or particular transport phenomenon) is positioned, and so it experiences only part of the total electrochemical gradient. The cell wall Donnan phase (see Section 3.5.5) is not believed to affect membrane surface ion concentration significantly although it is thought to slightly increase the concentration of cations and decrease the concentration of anions (Kinraide, 2004).
4.4.1.2
Using inhibitors
Pharmacology is used in combination with most transport techniques as a diagnostic for the involvement of specific transport pathways or the membrane location of a transport process. For instance, mercury (Hg2+ ) is used as a diagnostic blocker of aquaporins (Niemietz and Tyerman, 2002), tetraethylammonium (TEA+ ) of K+ channels, gadolinium (Gd3+ ) of (stretch-activated) cation channels (Demidchik et al., 2002a) and niflumate of anion channels (Roberts, 2006). However, care should be exercised, as some blockers appear to have limited specificity (e.g. niflumate blocks both anion and K+ channels with similar potency, Garrill et al., 1996; and TEA+ has been reported to block aquaporins, Yool et al., 2002). A sensible approach to take when using inhibitors is to screen many compounds to build up a pharmacological profile of a transport process or to use engineered blockers (such as antibodies or synthesised chemical libraries that specifically inhibit particular transport proteins or phenomenon; e.g. Blackwell and Zhao, 2003).
4.4.2
Accumulation and net uptake
The concentration and net accumulation of solutes within tissues can be used to imply transport across membranes. For instance, digested tissue (or tissue extract) can be screened (see Section 2.2) in a high-throughput manner using flame photometry,
54
PLANT SOLUTE TRANSPORT
ion chromotagraphy or ion-coupled mass spectrometry to identify transport mutants with particular ion profiles (Salt, 2004). Infiltration-centrifugation of samples is used to extract apoplastic-enriched solution, which can be similarly screened to differentiate it from symplastic content (e.g. Lohaus et al., 2001). All these techniques measure average content and have limited spatial-temporal resolution. Two established techniques with useful spatio-temporal resolution that are not invasive, but are costly and are useful for a subset of ions (or elemental compositions) include nuclear magnetic resonance (NMR; see Section 2.4) and X-ray microanalysis (XRMA; see Section 2.6.2). NMR can be used on whole plants to image concentrations non-invasively, or track movements of a limited number of solutes (13 C labelled compounds, e.g. glucose, [H+ ] with 19 F, phosphate using 31 P, Na+ with 23 Na) and, very effectively, water (using 1 H) (Kockenberger, 2001). XRMA can identify a greater number of elements but is used on fixed tissue (so lacks any real temporal resolution). However, when combined with electron microscopy, it can be used to construct revealing maps of ion distribution and compartmentation within tissues (e.g. Storey and Leigh, 2004). XRMA is extremely sensitive and can be used to measure ion content of samples on the picolitre scale, and therefore it has become an integral component of single-cell sampling (SiCSA; Section 2.6.4). SiCSA uses a pressure probe, itself a useful technique, for studying water permeability (P f ), P s and L p of native membranes in vivo, which may indicate the presence of protein-based transport pathways within membranes (Tomas and Leigh, 1999). For SiCSA, the pressurised glass microcapillary (with a tip <1 μm) is inserted into a cell and the vacuolar- or cytoplasmic-enriched samples withdrawn, due to turgor pressure. The elemental composition of specific cells accessible to a microcapillary can then be examined (e.g. Fricke et al., 1994).
4.4.3
Radioactive tracers
Accumulation into plant tissue can also be measured (even visualised) with good time resolution using radioactive isotopes (e.g. 109 Cd in leaves of Thlaspi caerulescens; Cosio et al., 2004). Plant tissue can be incubated in a solution containing a proportion of a particular solute as a radioactive isotope, e.g. 43 K, 86 Rb, 22 Na, 45 Ca, 36 Cl, 36 ClO 3 (for nitrate), and 14 C (labelling compounds such as urea and glucose), which acts as an analogue or tracer for the movement of the related solute form. The amount of radioactivity taken into (or effluxed from) the tissue is then measured over a number of time periods (see Section 2.6.2). To obtain the kinetics of unidirectional influx, experiments should be performed over a timescale of minutes (usually <20 min for most ions and tissues). The concentration dependence (and/or saturation) of uptake can also be obtained through fitting rates obtained from varying the concentration of (non-radioactive) solute with Michaelis–Menton parameters (K m and V max ) (Kaiser et al., 2002). Tracer-flux measurements have been used to identify both high-affinity and low-affinity transport systems in algae (e.g. MacRobbie, 1971) and plant roots (Kaiser et al., 2002). When conducting these experiments, the influence of unstirred layers may need to be considered, especially if V max is high and K m is low, as the presence of a significant unstirred layer may
SOLUTE TRANSPORT ACROSS PLANT MEMBRANES
55
become rate-limiting and result in an underestimation of transport parameters (see methodology in Walker and Pitman, 1976). Ions are effluxed by plant tissues, often at similar rates to influx; so long tissue incubation times in radioactive tracer (>1 h) are needed to gain a more thorough understanding of the movement, and accumulation or compartmentation, of solute within cells, tissues and whole plants. Compartmental analysis by tracer efflux (CATE; e.g. Walker and Pitman, 1976; Britto et al., 2006) has been instrumental in increasing our understanding of the ion fluxes across the tonoplast and PM and of ion pool sizes within these compartments (e.g. Britto and Kronzucker, 2003) as well as in elucidating, in particular, the ionic control of stomatal movements (e.g. MacRobbie, 2006). CATE assumes that there are three basic compartments within plant tissue at the cellular level (cell wall, cytosol and vacuole) and all can be fitted with separate influx rates with first-order kinetics. The rate of efflux of tracer from the different compartments of loaded tissue can similarly be fitted with separate rates (with first-order kinetics) and subtracted from accumulation data in order to more accurately determine influx rates compared to those of steady-state measurements (see Section 2.6.6). Tracer-flux experiments are particularly effective when carried out on isolated cells, protoplasts or membrane vesicles as they reduce assumptions concerning redistribution of tracer within complex tissue; however, insightful models can be used in these circumstances to understand better the transport processes through whole plants (e.g. K+ and Cl− , Cram and Pitman, 1972; Na+ , Davenport et al., 2005). Despite its power for some ions, the validity of CATE has been questioned for ion pools that turn over rapidly (e.g. Ca2+ , Britto and Kronzucker, 2001). Sampled tissues must be dissolved or solutions combined with a specific cocktail for measurement of radioactivity on a scintillation counter; therefore radioactive tracer experiments are destructive and cannot be used to study movements of solutes in real time. Finally, licences and strict monitoring of radioactive materials is required unless stable isotopes such as 14 N are used.
4.4.4
Fluorescent solute probes
Epifluorescent photometry and microscopy has long been a powerful tool for measuring the average ion concentration of tissues with excellent temporal resolution (see also Section 2.6.5). Recent advances in confocal and multiphoton microscopy and digital camera technology, coupled with dramatic advances in the available solute probes, are now allowing the imaging of transport processes in some cases at the level of individual proteins and on the millisecond scale (e.g. Fricker et al., 2006). Therefore it is now possible to use these techniques to view the subcellular origin of ion fluxes or the interactions between transport proteins and regulators of transport in real time. There is a plethora of probes available for a variety of ions (and membrane voltage) with a huge range of spectral properties (consult www.probes.com) but care should be taken when choosing probes for plant tissue due to natural autofluorescence (e.g. chlorophyll, NADH). The fluorescent properties of probes measure the activity of target solutes through two basic mechanisms following substrate
56
PLANT SOLUTE TRANSPORT
binding or dissociation, (1) by shifting emission or excitation spectra (allowing a ratiometric quantification) or (2) by changing emission or excitation intensity at a single wavelength. Single-wavelength probes have proved useful for measuring qualitative changes of ions if no alternative is available (e.g. Lemtiri-Chlieh et al., 2003). However, ratiometric probes (e.g. 1-[6-amino-2-(5-carboxy-2-oxazolyl)5-benzofuranyloxy]-2-(2-amino-5-methylphenoxy) ethane-N, N, N , N -tetraacetic acid (fura-2) for Ca2+ and 2 ,7 -bis-(carboxyethyl)-5-(and-6)-carboxyfluorescein (BCECF) for H+ ) should be preferentially used as they allow (semi-) quantification after in vivo calibration. Ratiometric probes negate any heterogeneity in measurement due to non-uniform dye accumulation, leakage of probe, photobleaching, thickness of specimen or inequalities in fluorescence detection (Roos, 2000). In vivo calibration is also essential as many probes change their spectral properties in planta due to the altered ionic, osmotic or protein content of cellular environments over those commonly chosen for in vitro calibration (Shaw, 2006). It can also be necessary to monitor any potential concentration changes of ‘interfering ions’ (e.g. [H+ ]) during experiments as these may affect probe fluorescence and produce artifactual results (see M¨uhling and L¨auchli, 2002). Apoplastic movement, concentration and accumulation of solutes can be investigated relatively easily, using membrane impermeant chemical-based probes, by feeding the probe into the transpiration stream or through vacuum infiltration. For instance, the extent of the apoplastic continuum between the roots and shoots for water and solutes was evaluated in rice (e.g. Yeo et al., 1987) and ratiometric quantification of apoplastic H+ , Ca2+ , K+ and Na+ under various scenarios have all been made (e.g. M¨uhling et al., 1998; M¨uhling and L¨auchli, 2000, 2002). Loading of probes into cells across the PM and cellular compartments provides a more significant challenge. Membrane-permeant probes can be loaded by vacuum filtration but cuticles or (suberised) cell walls can restrict or bind dyes. Acetoxymethyl (AM)-linked dyes can be loaded into cells at 4◦ C to avoid AM cleavage by cell wall esterases (e.g. Zhang et al., 1998). However, incomplete cleavage in the cytosol often leads to accumulation of dye within organelles and signal contamination from different subcellular compartments. Low pH (∼4.5) can also be used to mask the charged carboxyl groups that usually render most probes impermeant, but both low pH and temperature may affect the desired physiological response. Most loading techniques require little specialised equipment and so membrane-permeant dyes are frequently used, but as the concentration of loaded probe is difficult to control and the presence of excess probe can ‘buffer’ observable changes in ion pool sizes or produce (phyto-) toxic effects, other techniques are preferred in more sophisticated physiological studies (Shaw, 2006). As a general guideline for these kinds of experiments, 5–50 μM of probe is sufficient and the illumination intensity used should be so low that only after acclimation to the dark should probe loading be perceptible to the eye. To control their concentration, probes are often linked to high molecular weight dextrans to prevent leakage to other compartments and are loaded via microinjection (e.g. root hairs, Foreman et al., 2003; pollen tubes, Feij´o et al., 1999). Microinjection has proven one of the most revealing and reliable methods (e.g. it was used to reveal the first calcium oscillations seen in plant cells; McAinsh et al.,
SOLUTE TRANSPORT ACROSS PLANT MEMBRANES
57
1995), but is extremely technically demanding and has low throughput. Recent development of biolistic delivery (Bothwell et al., 2006) promises higher throughput with an equal level of control. However, all the techniques mentioned above are physically invasive and suffer from access problems, therefore providing a dilemma if researchers are required to study cells within the tissue profile. The development of new fluorescent protein (FP)-based nanosensors for solutes promises to overcome many of these problems as they are practically non-invasive, can be resolved at unparalleled spatio-temporal definition and appear to be present in low enough concentrations to not affect plant function (see Dixit et al., 2006, for a technical review). FPs can also be targeted at any cellular or apoplastic compartment (e.g. ER, Johnson et al., 2005; vacuole, Fluckiger et al., 2003), but the reduced fluorescent properties of current FPs at low pH (<6.5) make them less suitable as probes for solute dynamics in acidic environments. Single FP probes have been constructed (e.g. green fluorescent protein [GFP] has been modified to produce the ratiometric pH luorin to monitor cytosolic and apoplastic [H+ ]; Gao et al., 2004). Fluorescence resonance energy transfer (FRET) provides the opportunity to engineer FP sensors for a wide range of ions and metabolites by incorporating specific solute-binding moieties (for review see Lalonde et al., 2005). Upon binding of a specific substrate, a donor FP will transfer energy used in its excitation to an acceptor protein, thus decreasing its emission while increasing that of the interacting donor. In plants, Ca2+ (Allen et al., 1999) and Cl− (Lorenzen et al., 2004) dynamics have been studied, but powerful voltage and sugar probes also exist with many other probes being developed. Related to some FPs in origin, aequorin is a chemiluminescent protein that releases photons upon the binding of free Ca2+ . The quantum yield of aequorin upon binding Ca2+ is much lower than GFP but when overexpressed in a particular compartment (whole plant or cell-type specific targeting to the cytosol, to the cell wall or to intracellular compartments) it does facilitate a technically undemanding assay of average tissue [Ca2+ ] (e.g. Kiegle et al., 2000a; Gao et al., 2004). Aequorin assays have, at best, a tissue-type level of spatial resolution but are particularly effective in revealing information about stimulus-invoked [Ca2+ ] signatures, or the origin of [Ca2+ ] signals, when combined with the use of inhibitors and the specific targeting of apoaequorin to compartments. [Ca2+ ] can be imaged fairly non-invasively in whole plants, detached tissues or protoplasts, with relatively poor temporal resolution (>20 s for stimulus-induced transients), or measured photometrically, with better temporal resolution (∼1 s) but with limited spatial resolution. [Ca2+ ] ‘resting’ levels of the relevant compartment can also be measured, over tens of minutes, with sensitive photon-counting devices (Love et al., 2004).
4.4.5
Electrophysiology
Bioelectricity is a consequence of, and driving force behind, a plant’s transport economy (cf. Section 3.6.1). A plant’s electrical circuit consists of a membrane, which separates two areas of charge, and electrogenic transporters (ion channels, co-transporters, pumps). In conventional terms, this corresponds to a capacitor in
58
PLANT SOLUTE TRANSPORT
series with resistors. The compound electrochemical potential gradient (as a consequence of ion concentration equalities) across a membrane (membrane potential – E m ) equates to voltage. Many ‘transport non-literate’ researchers find that data from electrophysiological experiments are presented in an intimidating or, at least at first, a non-intuitive way. However, good basic introductions on how to interpret data or conduct experiments are available (e.g. Tester, 1997). Knowledge of Ohm’s and Fick’s laws and the derived Nernst equation (refer to Sections 3.6 and 5.1.3) are essential to understanding many electrophysiological assays. Some additional technological instructions should then be adequate to carry out many procedures. Several standard texts are referred to for a complete grounding in electrophysiological theory and techniques: Odgen (1994), Sakmann and Neher (1995), Hille (2001) and (specifically for plants) Volkov (2006). As the currents across membranes are generally small in magnitude (single ion channels can pass a current of <1 pA), high resistance recording equipment is ∗ needed. Therefore, it is essential that experiments be performed in an environment free of both vibration and electrical interference (e.g. on an air-table in an earthed Faraday cage). All electrical equipment external to the cage (e.g. computers and amplifiers) should be earthed to one point on the cage and share one universal grounding point. Most electrophysiological techniques are invasive but give direct and instant information about transport activity across membranes, unlike most of the techniques already mentioned which rely on ‘time-integrated’ assays. Unfortunately, most direct electrophysiological assays of transport are possible only for electrogenic transporters (those whose activity results in the movement of net charge); non-electrogenic transport such as that of water, or of ions through electroneutral carriers, cannot be studied directly with these techniques (however see Section 4.4.5.1).
4.4.5.1
Voltage-based measurements (membrane potential and ion concentration)
E m (also referred to as ψ) and the concentration of the ion of interest (x) on either side of a membrane ([x] in , internal; [x] ext , external), as well as the ion valency, define the electrochemical potential gradient for ion x. E m can be measured directly through the insertion of a ‘sharp’ (tip <1 μm) borosilicate/quartz microelectrode (backfilled with an electrolyte, usually ∼0.1–3 M K-Cl/K-acetate) into a membrane compartment. To complete the circuit, in series with the microelectrode should be a voltmeter and a reference electrode in the bulk external solution (see Ogden, 1994). An ion selective electrode (ISE) can be constructed by insertion of an ionophore (selectively permeable for ion x over other ions in a linear [Nernstian] fashion) into the microelectrode tip (cf. Section 2.2.5). [x] can be measured after backfilling the ISE with an electrolyte of known [x] and calibrating its voltage response in the ∗Ohms law dictates that if resistance of the measuring circuit in parallel with the plant membrane is above a threshold (∼1 G), ionic currents across membranes can be measured as a change in E m (Ogden, 1994).
SOLUTE TRANSPORT ACROSS PLANT MEMBRANES
59
desired concentration range of [x] (e.g. Miller and Wells, 2006). A specific ISE can only be constructed if the desired ionophore is available or can be synthesised, but there are a wide range available for both cations and anions (see www.sigma.com). Similar solid-state microsensors have also been developed for other solutes such as O 2 , NO and auxins (Mancuso and Marras, 2006). Unfortunately, ionophores vary in their selectivity profiles and ISE signals will suffer from contamination from other ions to varying degrees, notably Mg2+ from Ca2+ , Cl− from NO 3 − and organic anions, and K+ from NH 4 + . However, it may be possible, using several ISEs with different selectivities for the ‘interfering’ ions, to estimate [x] and other ion concentrations in these circumstances (Knowles and Shabala, 2004). When an ISE is inserted into a membrane compartment it will measure E m in addition to [x] in . Therefore, both an ISE and E m electrode have to be inserted into the same membrane compartment and E m subtracted from the ISE signal to obtain [x] in (Miller and Wells, 2006). Once both [x] in and [x] ext are determined, the Nernst equation can predict whether at the ‘resting’ E m the [x] in can be accounted for by purely passive processes or whether active transport plays a role at the measured [x] ext . To reduce damage to cells, multibarelled electrodes are constructed instead of impaling the same cell multiple times. Multibarelled electrodes can also be useful to ascertain which membrane compartment the electrode has penetrated. As the vacuole usually inhabits the majority of the cell interior, impalements may penetrate the tonoplast; therefore any E m reading will be a compound measurement of both that of the tonoplast and PM. A combined pH and E m reading will therefore establish whether the impalement is cytoplasmic or vacuolar (as an approximation, vacuolar – pH 5–6, ∼100 mV and cytoplasmic – pH >7, >−120 mV, when measured in an extracellular K+ of 1 mM; cf. Section 2.6.3). E m measurement has also been informative in understanding the electrogenic basis of stimulus-invoked membrane processes (e.g. action potentials in algae (Beilby, 1989) and stomatal guard cell movements (MacRobbie, 1985). Multiple-calibrated ISE can also be used to estimate ion fluxes around biological tissues with high spatial and temporal resolution. [x] ext is measured at points a known distance away from the source over a set period of time, and the parameters integrated using Fick’s law of diffusion (Sections 3.6.2 and 5.1.3) or an equivalent electrochemical law. Three commercial systems are available: MIFE® (microelectrode ion flux estimation) (University of Tasmania, Hobart, Tasmania, Australia; Newman et al., 1987), Seris (self-referencing ion selective) probe (BCRC, Woods Hole, MA, USA; Kuhtreiber and Jaffe, 1990) and SIET (scanning ion-selective electrode technique) (Applicable Electronics Ltd., Maryland, USA; Shipley and Feij´o, 1999). These have been used to gain valuable information about ion fluxes involved in the polar growth of pollen grains and tubes, roots, root hairs and various other tissues (Lew, 1998; Newman, 2001; Kunkle et al., 2006, Messerli et al., 2006; Shabala, 2006). Caution should be practiced when interpreting flux data, as the convention used when presenting data is usually opposite to that used in other electrophysiological assays such as voltage clamping (see Gilliham et al., 2006b). Both intracellular ISE and external ISE-based flux measurement can be used to study the non-electrogenic movement of solutes across membranes if the relevant sensor is available.
60
PLANT SOLUTE TRANSPORT
4.4.5.2
Voltage clamping
The symplastic continuum within plants makes it impossible to effectively control the voltage across most cells; however, this can be achieved in cells that are (relatively) electrically isolated (e.g. root hairs, guard cells; Lew, 2006) or that have been isolated by other means (e.g. protoplasts; see Section 4.5). By controlling E m it is possible to observe the passage of charged solutes across membranes as current (I i ) over time (down to the level of a single channel). V m can be fixed at a nominated level and compared to E m across the poles of a feedback amplifier, the difference being due to I i (the flow of ions across the membrane). The feedback circuit injects a current (I f ) equal and opposite to I i and all parameters can be recorded by computer. I i can be similarly clamped to observe the change in voltage. V m (or I i ) clamping can be performed on larger cells using two intracellular microelectrodes (TEVC) or by using one electrode (dSEVC). V m clamping therefore allows the characteristics of transporters (conductance, gating and selectivity) to be identified over the physiological E m range whilst controlling the electrochemical potential across the membrane. TEVC has revealed much information regarding the ionic basis of stomatal movement in vivo (Blatt and Armstrong, 1993), and while presently underutilized in plant sciences, I i clamping could be useful in studying ligand-gated ion channel activity in intact or isolated tissues.
4.5 4.5.1
Using isolated membranes for transport studies Isolating membranes
Specific cell types or native membranes, such as those buried within the plant tissue profile, that are inaccessible to many of the conventional assays mentioned above, can be investigated directly after isolation from whole plants. The cell wall (and its obvious influence in signalling or the creation of unstirred layers) can be removed and the effect of intracellular components (and their regulation of membrane processes) can be diminished by gaining access to the cell interior or by inverting vesicles. These two obvious advantages of working with isolated membranes, or cells, might also be a disadvantage as transporters may not show true physiological activity or may even show no activity. Incubation of tissues in a cocktail of enzymes that breakdown cell walls and middle lamellae (e.g. cellulase, cellulysin, pectolyase, macerase) will release cells or cell fragments (termed protoplasts or spheroplasts) into solution, bound simply by a PM, but overexposure to the cocktail will decrease membrane viability and integrity (e.g. Vogelzang and Prins, 1992). To protect membranes from rupture, an osmoticum (e.g. mannitol) must be included, although vacuoles can be isolated from protoplasts by osmotic shock (e.g. Pantoja and Smith, 2002). To protect against proteases, bovine serum albumin should be included as a competitive substrate and to protect against phenolic oxidases, polyvinyl pyrrolidone, ascorbate and metabisulfite can all be included; pH will also need to be buffered. It has also been reported that increasing the level of Ca2+ improves protoplast yield and viability (Demidchik et al., 2002b). Mechanical techniques are also used to isolate cells, such as laser
SOLUTE TRANSPORT ACROSS PLANT MEMBRANES
61
ablation of root hairs (V´ery et al., 2000) or laser capture microdissection of specific cell types (Nelson et al., 2006). Protoplasts can also be selectively released (e.g. from epidermal cells; Foreman et al., 2003) or identified and sorted based on endogenous properties such as size, viability and chlorophyll content (Wegner and Raschke, 1994; Galbraith and Birnbaum, 2006). Fluorescence-activated (cell) sorting can be used to obtain viable protoplasts from specific cell (or organelle) types by their identification through FP expression using an appropriate regulatory sequence (e.g. GAL4-GFP cell-specific enhancer trap lines; Kiegle et al., 2000b; Galbraith and Birnbaum, 2006). Protoplasts can make a convenient starting point for isolation of internal organelles, or membranes can be fractionated directly and there are established protocols for obtaining most membranes with a high purity (∼>95%; Robinson and Hinz, 2001). Typically, tissue is homogenised (using a pestle and mortar, blender or sonication with glass beads, depending on the shearing strength required to break cell walls) followed by purification. Several steps of differential centrifugation are used to separate cell debris and the different membrane fractions in terms of mass and density (most commonly using sucrose or iodinated compound density gradients). Fraction homogeneity is then confirmed using membrane-specific stains, immunological detection (e.g. tonoplastic intrinsic proteins [TIPs] for tonoplast fractions) or enzyme assays (glucan synthase for PM fractions). To reduce the deleterious effects of vacuolar rupture, tissue should be homogenised at 4◦ C and incubated in a protective solution, similar in composition to a protoplast isolation medium but without the cell wall-degrading enzymes. For transport studies, the sidedness of vesicles should be considered as catalytic sites, for many transporters are on the inside (e.g. ATPases). Aqueous polymer two-phase partition centrifugation (using polyethylene glycol and dextran), which preferentially purifies hydrophobic and negatively charged vesicles, is used to select ‘tight’ (non-leaky) right-side-out PM vesicles into the polyethylene glycol upper phase. Brij 58 (a detergent) can be used to increase the percentage of inside-out vesicles (Johansson et al., 1995), whereas several freeze-thaw cycles can increase the proportion of right-side-out vesicles.
4.5.2
Assaying transport activities of protoplasts and membrane vesicles
Membrane vesicles have been used extensively to characterise pumps (ATPases, PPases; e.g. Sze 1985), co-transporters (Qui et al., 2004) and aquaporins (Alleva et al., 2006) in native membrane fractions (e.g. PM, thylakoid, tonoplast) or through the use of purified proteins reconstituted into artificial liposomes. The accumulation of radioactive isotopes (e.g. 45 Ca; Marshall et al., 1994) or changes in light scattering (or fluorescent properties of an entrapped probe) can be used to measure the kinetic parameters of solute or water movement across isolated membrane vesicles (Verkman, 1995) and rate constants for ATP binding, substrate pumping or transport stoichiometry can also be determined. Fluorescent probes can be loaded into vesicles by many of the techniques mentioned in Section 4.4.4 and via electroporation and detergent permeabilisation, although these often make membranes ‘leaky’. Stopped-flow spectrophotometers allow quick solution exchanges (<1 ms) in small
62
PLANT SOLUTE TRANSPORT
volumes (20–100 μl) and are capable of measuring rapid spectral changes in vesicle preparations (<100 ms) induced by the movement of solute (or water) into or out of the vesicle across the membrane of interest. For instance, P f or P s of membranes can be determined by fitting a time course to light scattering changes, if initial vesicle size is known and homogeneous, and this has become a useful technique for investigating aquaporin properties of native membranes in vitro (Niemietz and Tyerman, 2002). Light scattering can be sensitive to motion effects during fluid mixing and changes in refractive index although these can be easily controlled for, whereas the use of fluorescent probes negates these problems but has other caveats (see Section 4.4.4). Patch clamp electrophysiology is a technique that allows the voltage (or current) clamping of protoplasts or membrane vesicles (Hamill et al., 1981). A ‘blunt’ and fire-polished microelectrode (of diameter ∼1 μm) is pressed against the ‘naked’ membrane and forms a high resistance seal preventing the leakage of ions across the junction. Suction can be applied to the interior of the microelectrode and the membrane beneath ruptures, giving access to the internal contents. Patch clamping therefore allows the solution composition of either side of the membrane, as well as V m , to be controlled. Solutions are often carefully designed so that the activity of a single type of ion channel or transporter can be observed in isolation or can be defined (e.g. if K+ transport is the object of study, K+ will be the predominant permeable ion in solution, or alternatively the Nernst potentials for other ions will be engineered to be far apart so that clear comparisons can be made with reversal potentials, E rev ). Regulators of transport can also be determined by their addition to either side of the membrane (e.g. phosphatase-dependent ABA activation of Cl− channels in guard cells; Pei et al., 1997) unlike TEVC or dSEVC. However, the dilution of regulators within intracellular milieu could also result in ‘run-down’ or aberrant transporter activity. Patch clamping can be performed at the ‘whole-cell’ level, which measures ‘macroscopic’ current (the net current through all active electrogenic transporters within the membrane, as with TEVC), or, in its mostly highly resolved form, at a ‘patch’ level, which measures ‘microscopic’ currents in a small section of membrane (the net current through single [or few] electrogenic transporters). Patches can be in an either ‘inside-out’ (internal membrane side facing the bathing solution) or ‘outside-out’ (outside facing the bathing solution) configuration. A ‘cell-attached’ configuration, although having the advantage that cellular contents remain undiluted, is infrequently used as V m and electrochemical gradients are hard to define. Precise measurements of conductance, gating and selectivity can be made for individual channels, or the pumping rate or coupling ratio for pumps, or stoichiometries for transporters, can be ascertained using E rev (e.g. Davies et al., 1996; Gilliham and Tester, 2005; however see Section 4.7). Fluorescent dyes can be loaded via a patch pipette and be used for imaging, or photometry, of ion concentrations whilst simultaneously controlling V m . This can reveal whether certain membrane currents on particular membranes are responsible for specific ion increases (e.g. Lemtiri-Chlieh et al., 2003). The capacitance of the membrane can also be monitored during patch clamp experiments and related (using a constant) to membrane area; this can then be used
SOLUTE TRANSPORT ACROSS PLANT MEMBRANES
63
to study processes that involve a change in membrane area such as endocytosis and exocytosis (Homann and Tester, 1997). These may be important for solute trafficking events directly (e.g. capacitive Ca2+ flux) or indirectly (e.g. fusion of ion-channel containing vesicles induced by turgor changes; Meckel et al., 2004). Membrane vesicle preparations, or liposomes that have had reconstituted protein added to them, can also be patch clamped. More commonly, these membrane preparations are added to a planar lipid bilayer (PLB) system to survey their electrogenic activity upon fusion, with the PLB painted across the divide (of ∼200 μm) between two solutions. PLBs use the same electronics as the patch clamp system and so can similarly characterise single channels. PLBs have been useful for observing dominant ion channels in the PM, thylakoid and mitochondria (e.g. White and Tester, 1994). Lipid composition of the PLB must be carefully considered, as surface charge or structural effects may affect channel function; it has also been observed that some lipids can act as ionophores and conduct ion currents (M. Tester, unpublished data).
4.6 4.6.1
Using molecular techniques to inform transport studies Revealing the molecular identity of transporters and testing gene function
In silico selection can be useful for identifying putative transporters such as K+ channels (Gaymard et al., 1998) and aquaporins (Sakurai et al., 2005) but has so far been less definitive for other families (e.g. GLR, Gilliham et al., 2006) for which no transport function has yet been identified. Additionally, as functions for >50% of genes within the sequenced plant genomes remain yet to be ascribed, such approaches may not be so straightforward. Regardless of these limitations, invaluable web-based annotated and hot-linked databases exist (e.g. in arabidopsis; for membrane proteins – aramemnon.botanik.uni-koeln.de, www.suba.bcs.uwa.edu.au, genes –www.arabidopsis.org, and toolkits for homology or motif-based searches – www.ncbi.nlm.nih.gov/blast). Transport functions of proteins can be identified by studying plant populations with different genotypes or phenotypes. Forward genetic screens rely on the isolation of mutant plants grown in specific conditions by phenotypic analysis (e.g. root or shoot growth, survival or altered ion accumulation, an example being sos1; Qui et al., 2002 – see Section 4.4.2) followed by a technique used to isolate the allele responsible for a particular trait, such as QTL analysis or subtractive hybridisation of cDNA (Flowers et al., 2000). However, this technique is rarely successful in isolating transport mutants directly. Phenotypes may often be too subtle to detect or gene function may be compensated by physiological plasticity (otherwise known as pathway ‘redundancy’). Once a target gene has been identified, reverse genetic screens using ‘loss-offunction’ (or ‘knockout’) mutants (created by the insertion of T-DNA, insertion elements or transposons through plant transformation) are useful for analysing the function of a gene or pathway (Peiter et al., 2005). A database of available potential
64
PLANT SOLUTE TRANSPORT
‘knockout’ lines of arabidopsis can be found at www.arabidopsis.org and a map of the location of the ‘knockout’ insertional element within the genome is available at atensembl.arabidopsis.info. RNAi allows multiple genes from the same family to be silenced and so reduces the chances of pleiotropic up-regulation of related genes that can mask phenotypes. TILLING, which is a high-throughput polymerase chain reaction based screen of heavily mutagenised plant lines, is used to recover a range of mutations, not only knockouts, within a specific gene and therefore can identify critical residues within a protein (Comai and Henikoff, 2006; see tilling.fhcrc.org:9366). To confirm whether a phenotype is a result of the gene of interest, ‘knockout’ mutants should be recomplemented with the specific gene to restore transport function (e.g. Peiter et al., 2005). Overexpression of target genes can be performed in planta or in homologous or heterologous expression systems (see Section 4.6.3) to see if a transport phenotype has been exaggerated. This can be tested through a relevant assay (e.g. solute accumulation – see Section 3.5.2, or increase ‘whole cell’ conductance – see Section 4.5.2). In planta, overexpression can be constitutive, which may increase the chances of observing a phenotype. However, ectopic expression may also mask phenotypes if cell-specific or developmental processes are crucial to revealing a transport phenotype in which case overexpression can also be driven by (inducible) cell- or tissue-specific promoters (e.g. Moore et al., 2006).
4.6.2
Location of transport proteins
Equally as important to ascribing a physiological transport role to a particular protein (in addition to the transport activity it catalyses) is its spatial and temporal expression. Fractionation has revealed valuable information about transport activities of specific membranes (see Sections 4.5.1 and 4.5.2). However, as membrane proteins are highly hydrophobic and often low in abundance they have been difficult to isolate until recently (ATPases being an exception; e.g. Harper et al., 1989). This area has recently been reinvigorated through the use of chloroform–methanol extraction or blue native PAGE separation, and identification of membrane proteins in most organelles is now underway through mass spectrometry-based sequencing in a high-throughput manner (e.g. Heazlewood et al., 2005). Once a particular protein sequence is known, the gene that encodes the protein can be uncovered in silico, as can any related genes and their function tested through recombinant technologies (see Sections 4.6.1 and 4.6.3). However, as membrane preparations are not 100% pure, this can sometimes lead to the misidentification of the membrane on which a particular protein is located (e.g. Wandrey et al., 2004) and it is therefore important to confirm such information with some of the techniques mentioned below. Reporter genes (e.g. β-glucoronidase, GFP or luciferase) can be fused to gene promoters, if known, to reveal tissue localisation. In addition, gene fusions to GFP (or other markers) may reveal membrane location within a plant or a heterologous system (Peiter et al., 2005). However, such gene fusions may also interfere with membrane targeting or protein function or may mark some membranes anomalously
SOLUTE TRANSPORT ACROSS PLANT MEMBRANES
65
due to overexpression. Antibodies raised to specific epitopes may be used in situ but can equally be used on membrane fraction preparations (e.g. immunolocalisation, immunoprecipitation or western blotting) to overcome some of these issues, but the successful preparation of such antibodies is not yet guaranteed. Transcriptional analysis, using northern blots, real-time reverse-transcription polymerase chain reaction and macroarray or microarrays of particular genes can be useful to study how its expression can be regulated. Gene families with close homologues (e.g. aquaporins; Jang et al., 2004), or perhaps pleiotropic regulation of these genes following ‘knockout’ or overexpression of the gene of interest, can also be studied using such analysis. However, transcript levels may not always correlate with protein levels, so it may also be wise to use additional proteomic analysis such as antibodies (e.g. Aroca et al., 2005).
4.6.3
Heterologous expression
Heterologous expression systems provide an additional mechanism for validating and functionally characterising the transport activity (or regulation) of plant genes. Whilst the influence of plant endogenous regulators and metabolism is removed (which may or may not be desirable), it is replaced with those of the host, which may, in turn, modify the in planta transport properties of the protein (see Dreyer et al., 1999). Interaction studies (e.g. the split-ubiquitin two-hybrid yeast system (Obrdlik et al., 2004), which is favoured for membrane proteins, have been used to characterise potential regulators. And it seems likely that, in time, the regulation of transporter function in any system will be better understood by identifying and testing the candidate regulators pulled out in these screens. It should also be noted that protein–protein interactions can be (and should be) verified in planta with techniques such as FRET (or similar). Heterologous expression systems are generally high throughput, once the relevant cDNA is inserted into a suitable vector, and can express the gene of interest within a few days. Escherichia coli is generally not used for characterising eukaryotic membrane proteins, as incorrect folding or toxicity effects following overexpression are common, but has been used to identify and characterise several plant proteins (e.g. Uozumi, 2001). The most utilised system has been yeast (Saccharomyces cerivisiae, Schizosaccharomyces pombe or Pichia pastoris). Functional complementation of yeast strains deficient in certain transport pathways with plant cDNA libraries (or specific genes) is a proven system for identifying the encoded transport proteins from plants through simple growth assays (e.g. AKT1, Sentenac et al., 1992; H+ -ATPase, Palmgren and Christensen, 1993). Yeast can also be used to purify large amounts of protein ready for: reconstitution into liposomes (Lanfermeijer et al., 1997), the study of crystal structure (e.g. T¨ornroth-Horsefield et al., 2006) or the analysis of specific binding residues (i.e. phosphorylation sites; Maudoux et al., 2000). Site-directed mutagenesis of putative critical residues within proteins, followed by functional screens, has also revealed many insights into transport regulation (e.g. Johansson et al., 2006).
66
PLANT SOLUTE TRANSPORT
Immature eggs (or oocytes) isolated from ovaries of the South African clawed toad (Xenopus laevis) provide another popular system for characterising transporters. X. laevis oocytes can synthesise proteins from injected cDNA (into the nucleus) or cRNA (cytoplasm) and target plant proteins to the PM (subcellular targeting peptides may have to be removed or added – e.g. Chen et al., 1999; see review by Miller and Zhou, 2000). Both yeast and X. laevis oocytes can be used for assays of; water permeability of aquaporins (by shadow imaging of X. laevis oocytes (Tournaire-Roux et al., 2003) or by spectrophotometer for yeast (Sakurai et al., 2005)), and electrogenic activity of co-transporters or ion channels and pumps by TEVC or patch clamping (e.g. Bertl et al., 1998; Gaymard et al., 1998; Liu et al., 2003). Electroneutral transport can also be studied by radioactive flux (see Section 4.4.3). Cell-cultured insect cells (Sf9/21) or mammalian cell lines (COS) provide other systems used for patch clamp-based characterisation (Dreyer et al., 1999). Plant heterologous and homologous overexpression systems (e.g. transient overexpression in tobacco mesophyll cells, or arabidopsis suspension cultured cells) have also been developed so that transport proteins can be properly processed and patch clamp electrophysiological characterisation can be easily applied (e.g. Bei and Luan, 1998).
4.7
Combining techniques (an example of increasing resolution and physiological context)
Many transport techniques load the dice in favour of viewing a certain transport activity of a protein (e.g. in ion channel selectivity experiments the ion mixtures used do not often relate to those seen in planta). This may result in the incorrect characterisation of the transport properties of the protein. To define properly the stoichiometry or selectivity of transporters and channels, it is mandatory that ion fluxes and ion currents across membranes be measured simultaneously. This can be achieved by combining voltage clamping with ISE-based flux measurement in both heterologous and plant systems (Kang et al. 2003; Gilliham et al., 2006b). Additionally, by combining these techniques it is then possible to conduct selectivity experiments in complex and physiologically relevant solutions.
4.8
Future development
High-throughput functional characterisation of proteins and their regulation is becoming a reality through automation (e.g. multichannel patch clamp (Wang and Li, 2003) or TEVC for X. laevis oocytes (Schnizler et al., 2003)). The use of complex computer-based algorithms has already been used for multiple transport-associated processes (e.g. simulating the molecular dynamics of channel gating; T¨ornrothHorsefield et al., 2006). However, it is becoming apparent that the signalling networks that regulate many transport processes, when integrated into the physiological framework of a functional cell (or plant), are too complex to comprehend without an
SOLUTE TRANSPORT ACROSS PLANT MEMBRANES
67
iterative exchange between computer modelling and experimentation. It is therefore likely that computer-based modelling will be combined with experimental data with increasing frequency in the near future.
4.9
Conclusions
As is the norm for experimental science, for every interpretation of an investigational outcome there is often an alternative explanation due to some experimental caveat, and transport studies are certainly no exception. Intrinsic to every experiment is a compromise between the degree of invasiveness or removal from physiological reality and the extent of the biochemical, spatial and temporal resolution/definition achieved. Ultimately, it is the question that decides which technique should be used, but often the most reductionist and highly resolved techniques are those with the least physiological applicability (Tester, 1997). It is fortunate, therefore, that there is a whole host of techniques and resources at the experimenters’ disposal that, when combined, are adequate to address many unanswered questions in plant physiology. The importance of confirming a result reported using one assay with another technique to ascertain a physiological role cannot be overstated. Unfortunately, the choice of transport assay available to a researcher is still limited by expense, expertise and equipment (or its accessibility). All of these may be solved through collaboration (although boundaries and expectations should be clearly defined before entering into any such relationship). It would have been impossible to describe all techniques with sufficient detail for readers to fully understand any one technique in the confines of this chapter. Instead a snapshot has been presented that has hopefully provided some guidance to students and researchers alike, for ways in which transport assays can be used to better understand plant function.
Acknowledgements I am grateful to Bob Barrett, Romola Davenport, Mark Tester and Steve Tyerman for comments on the manuscript, Julia Davies and Tony Miller for guidance and members of the ‘transport group’ Department of Plant Sciences, University of Cambridge for being a source of knowledge and inspiration over the past 8 years.
References Alexandre, J. and Lassalles, J.P. (1992) Intracellular Ca2+ release by InsP 3 in plants and effect of buffers on Ca2+ diffusion. Philosophical Transactions of the Royal Society of London Series B-Biological Sciences 338, 53–61. Allen, G.J., Kwak, J.M., Chu, S.P., et al. (1999) Cameleon calcium indicator reports cytoplasmic calcium dynamics in Arabidopsis guard cells. Plant Journal 19, 735–747. Alleva, K., Niemietz, C.M., Maurel, C., Parisi, M., Tyerman, S.D. and Amodeo, G. (2006) Plasma membrane of Beta vulgaris storage root shows high water channel activity regulated by cytoplasmic pH and a dual range of calcium concentrations. Journal of Experimental Botany 57, 609–621.
68
PLANT SOLUTE TRANSPORT
Aroca, R., Amodeo, G., Fernandez-Illescas, S., Herman, E.M., Chaumont, F. and Chrispeels, M.J. (2005) The role of aquaporins and membrane damage in chilling and hydrogen peroxide induced changes in the hydraulic conductance of maize roots. Plant Physiology 137, 341–353. Baluska, F., Volkmann, D. and Barlow, P.W. (2004) Eukaryotic cells and their cell bodies. Cell theory revised. Annals of Botany 94, 9–32. Barber, J. (1980) Membrane-surface charges and potentials in relation to photosynthesis. Biochimica et Biophysica Acta 594, 253–308. Bei, Q.X. and Luan, S. (1998) Functional expression and characterization of a plant K+ channel gene in a plant cell model. Plant Journal 13, 857–865. Bertl, A., Bihler, H., Kettner, C. and Slayman, C.L. (1998) Electrophysiology in the eukaryotic model cell Saccharomyces cerevisiae. Pflugers Archiv: European Journal of Physiology 436, 999–1013. Bhat, R.A. and Panstruga, R. (2005) Lipid rafts in plants. Planta 223, 5–19. Birnbaum, K., Jung, J.W., Wang, J.Y., et al. (2005) Cell type-specific expression profiting in plants via cell sorting of protoplasts from fluorescent reporter lines. Nature Methods 2, 615–619. Blackwell, H.E. and Zhao, Y. (2003) Chemical approaches to plant biology. Plant Physiology 133, 448–455. Blatt, M. and Armstrong, F. (1993) K+ channels of stomatal guard-cells – abscisic acid evoked control of the outward rectifier mediated by cytoplasmic pH. Planta 191, 330–341. Bothwell, J.H.F., Brownlee, C., Hetherington, A.M., Ng, C.K.Y., Wheeler, G.L. and McAinsh, M.R. (2006) Biolistic delivery of Ca2+ dyes into plant and algal cells. Plant Journal 46, 327–335. Britto, D.T. and Kronzucker, H.J. (2001) Can unidirectional influx be measured in higher plants? A mathematical approach using parameters from efflux analysis. New Phytologist 150, 37–47. Britto, D.T. and Kronzucker, H.J. (2003) Cytosolic ion exchange dynamics: insights into the mechanisms of component ion fluxes and their measurement. Functional Plant Biology 30, 355– 363. Britto, D.T., Szczerba, M.W. and Kronzucker, H.J. (2006) A new, non-perturbing, sampling procedure in tracer exchange measurements. Journal of Experimental Botany 57, 1309–1314. Chen, G.Q., Cui, C.H., Mayer, M.L. and Gouaux, E. (1999) Functional characterization of a potassiumselective prokaryotic glutamate receptor. Nature 402, 817–821. Comai, L. and Henikoff, S. (2006) Tilling: practical single-nucleotide mutation discovery. Plant Journal 45, 684–694. Cosio, C., Martinoia, E. and Keller, C. (2004) Hyperaccumulation of cadmium and zinc in Thlaspi caerulescens and Arabidopsis halleri at the leaf cellular level. Plant Physiology 134, 716–725. Cram W.J. and Pitman M.G. (1972) The action of abscisic acid on ion uptake and water flow in plant roots. Australian Journal of Biological Sciences 25, 1125–1132. Davenport R., James R.A., Zakrisson-Plogander A., Tester M. and Munns, R. (2005) Control of sodium transport in durum wheat. Plant Physiology 137, 807–818. Davies, J.M., Sanders, D. and Gradmann, D. (1996) Reaction kinetics of the vacuolar H+ -pumping ATPase in Beta vulgaris. Journal of Membrane Biology 150, 231–241. Demidchik, V., Davenport, R.J. and Tester, M. (2002a) Nonselective cation channels in plants. Annual Review of Plant Biology 53, 67–107. Demidchik, V. and Tester, M. (2002b) Sodium fluxes through nonselective cation channels in the plasma membrane of protoplasts from arabidopsis roots. Plant Physiology 219, 128–379. Dixit, R., Cyr, R. and Gilroy, S. (2006) Using intrinsically fluorescent proteins for plant cell imaging. Plant Journal 45, 599–615. Dreyer, I., Antunes, S., Hoshi, T., et al. (1997) Plant K+ channel alpha-subunits assemble indiscriminately. Biophysical Journal 72, 2143–2150. Dreyer, I., Horeau, C., Lemaillet, G., et al. (1999) Identification and characterization of plant transporters using heterologous expression systems. Journal of Experimental Botany 50, 1073–1087. Engelman, D.M. (2005) Membranes are more mosaic than fluid. Nature 438, 578–580. Feijo, J.A., Sainhas, J., Hackett, G.R., Kunkel, J.G. and Hepler, P.K. (1999) Growing pollen tubes possess a constitutive alkaline band in the clear zone and a growth-dependent acidic tip. Journal of Cell Biology 144, 483–496.
SOLUTE TRANSPORT ACROSS PLANT MEMBRANES
69
Fischer, U., Men, S. and Grebe, M. (2004) Lipid function in plant cell polarity. Current Opinion in Plant Biology 7, 670–676. Flowers, T.J., Koyama, M.L., Flowers, S.A., Sudhakar, C., Singh, K.P. and Yeo, A.R. (2000) QTL: their place in engineering tolerance of rice to salinity. Journal of Experimental Botany 51, 99– 106. Fluckiger, R., De Caroli, M., Piro, G., Dalessandro, G., Neuhaus, J.M. and Di Sansebastiano, G.P. (2003) Vacuolar system distribution in arabidopsis tissues, visualized using GFP fusion proteins. Journal of Experimental Botany 54, 1577–1584. Foreman, J., Demidchik, V., Bothwell, J.H.F., et al. (2003) Reactive oxygen species produced by NADPH oxidase regulate plant cell growth. Nature 422, 442–446. Fricker, M., Runions, J. and Moore, I. (2006) Quantitative fluorescence microscopy. Annual Review of Plant Biology 57, 79–107. Galbraith, D.W. and Birnbaum, K. (2006) Global studies of cell type-specific gene expression in plants. Annual Review of Plant Biology 57, 451–475. Gao, D.J., Knight, M.R., Trewavas, A.J., Sattelmacher, B. and Plieth, C. (2004) Self-reporting Arabidopsis expressing pH and Ca2+ indicators unveil ion dynamics in the cytoplasm and in the apoplast under abiotic stress. Plant Physiology 134, 898–908. Garrill A., Tyerman S.D., Findlay G.P. and Ryan P.R. (1996) Effects of NPPB and niflumic acid on outward K+ and Cl− currents across the plasma membrane of wheat root protoplasts. Australian Journal of Plant Physiology 23, 527–534. Gaymard, F., Pilot, G., Lacombe, B., et al. (1998) Identification and disruption of a plant shaker-like outward channel involved in K+ release into the xylem sap. Cell 94, 647–655. Gibeaut, D.M., Hulett, J., Cramer, G.R. and Seemann, J.R. (1997) Maximal biomass of Arabidopsis thaliana using a simple, low-maintenance hydroponic method and favorable environmental conditions. Plant Physiology 115, 317–319. Gilliham, M., Campbell, M., Dubos, C., Becker, D. and Davenport, R. (2006) In: Communication in Plants – Neuronal Aspects of Plant Life (eds Baluska, F., Mancuso, S. and Volkmann, D.), pp. 187–204. Springer, Berlin. Gilliham, M., Sullivan, W., Tester, M. and Tyerman, S.D. (2006) Simultaneous flux and current measurement from single plant protoplasts reveals a strong link between K+ fluxes and current, but no link between Ca2+ fluxes and current. Plant Journal 46, 134–144. Gilliham, M. and Tester, M. (2005) The regulation of anion loading to the maize root xylem. Plant Physiology 137, 819–828. Hagio, M., Sakurai, I., Sato, S., Kato, T., Tabata, S. and Wada, H. (2002) Phosphatidylglycerol is essential for the development of thylakoid membranes in Arabidopsis thaliana. Plant Cell Physiology 43, 1456–1464. Hamill, O.P., Marty, A., Neher, E., Sakmann, B. and Sigworth, F.J. (1981) Improved patch-clamp techniques for high-resolution current recording from cells and cell-free membrane patches. Pflugers Archiv: European Journal of Physiology 391, 85–100. Heazlewood, J.L., Tonti-Filippini, J., Verboom, R.E. and Millar, A.H. (2005) Combining experimental and predicted datasets for determination of the subcellular location of proteins in Arabidopsis. Plant Physiology 139, 598–609. Hille, B. (ed) (2001) Ion Channels of Excitable Membranes. Sinauer Associates Inc., Sunderland, MA. Homann, U. and Tester, M. (1997) Ca2+ -independent and Ca2+ /GTP-binding protein-controlled exocytosis in a plant cell. Proceedings of the National Academy of Sciences of the United States of America 94, 6565–6570. Jang, J.Y., Kim, D.G., Kim, Y.O., Kim, J.S. and Kang, H.S. (2004) An expression analysis of a gene family encoding plasma membrane aquaporins in response to abiotic stresses in Arabidopsis thaliana. Plant Molecular Biology 54, 713–725. Johansson, F., Olbe, M., Sommarin, M. and Larsson, C. (1995) Brij 58, a polyoxyethylene acyl ether, creates membrane vesicles of uniform sidedness. A new tool to obtain inside-out (cytoplasmic side-out) plasma membrane vesicles. Plant Journal 7, 165–173.
70
PLANT SOLUTE TRANSPORT
Johansson, I., Wulfetange, K., Poree, F., et al. (2006) External K+ modulates the activity of the Arabidopsis potassium channel SKOR via an unusual mechanism. Plant Journal 46, 269–281. Johnson, A.A.T., Hibberd, J.M., Gay, C., et al. (2005) Spatial control of transgene expression in rice (Oryza sativa L.) using the GAL4 enhancer trapping system. Plant Journal 41, 779–789. Jouhet, J., Mar´echal, E., Baldan, B., Bligny, R., Joyard, J. and Block, M.A. (2004) Phosphate deprivation induces transfer of DGDG galactolipid from chloroplast to mitochondria. Journal of Cell Biology 167, 863–874. Kaiser, B.N., Rawat, S.R., Siddiqi, M.Y., Masle, J. and Glass, A.D.M. (2002) Functional analysis of an Arabidopsis T-DNA ‘knockout’ of the high-affinity NH 4 + transporter AtAMT1;1. Plant Physiology 130, 1263–1275. Kang, T.M., Markin, V.S. and Hilgemann, D.W. (2003) Ion fluxes in giant excised cardiac membrane patches detected and quantified with ion-selective microelectrodes. Journal of General Physiology 121, 325–347. Kiegle, E., Gilliham, M., Haseloff, J. and Tester, M. (2000b) Hyperpolarisation-activated calcium currents found only in cells from the elongation zone of Arabidopsis thaliana roots. Plant Journal 21, 225–229. Kiegle, E., Moore, C.A., Haseloff, J., Tester, M.A. and Knight, M.R. (2000a) Cell-type-specific calcium responses to drought, salt and cold in the Arabidopsis root. Plant Journal 23, 267–278. Kinraide, T.B. (2001) Ion fluxes considered in terms of membrane-surface electrical potentials. Australian Journal of Plant Physiology 28, 605–616. Kinraide, T.B. (2004) Possible influence of cell walls upon ion concentrations at plasma membrane surfaces. Toward a comprehensive view of cell-surface electrical effects upon ion uptake, intoxication, and amelioration. Plant Physiology 136, 3804–3813. Knowles, A. and Shabala, S. (2004) Overcoming the problem of non-ideal liquid ion exchanger selectivity in microelectrode ion flux measurements Journal of Membrane Biology 202, 51–59. Kockenberger, W. (2001) Functional imaging of plants by magnetic resonance experiments. Trends in Plant Science 6, 286–292. Kuhtreiber, W.M. and Jaffe, L.F. (1990) Detection of extracellular calcium gradients with a calciumspecific vibrating electrode. Journal of Cell Biology 110, 1565–1573. Kunkel, J.G., Cordeiro, S., Xu, Y., Shipley, A.M. and Feijo, J.A. (2006) Use of non-invasive ionselective microelectrode techniques for the study of plant development. In: Plant Elecrophysiology – Methods and Techniques (ed Volkov, V.), pp. 109–135. Springer, Berlin. Lalonde, S., Ehrhardt, D.W. and Frommer, W.B. (2005) Shining light on signaling and metabolic networks by genetically encoded biosensors. Current Opinion in Plant Biology 8, 574– 581. Lanfermeijer, F.C., Venema, K. and Palmgren, M.G. (1997) Purification of heterologously expressed plant plasma membrane H+ -ATPase by Ni2+ -affinity-chromatography. Annals of the New York Academy of Sciences 834, 139–141. Lemtiri-Chlieh F., MacRobbie E.A.C., Webb A.A.R., et al. (2003) Inositol hexakisphosphate mobilizes an endomembrane store of calcium in guard cells. Proceedings of the National Academy of Sciences of the United States of America 100, 10091–10095. Lew, R. (2006) Use of double barrel micropipettes to voltage clamp plant and fungal cells. In: Plant Electrophysiology – Methods and Techniques (ed Volkov, V.), pp. 139–153. Springer, Berlin. Liu, L.H., Ludewig, U., Frommer, W.B. and von Wiren, N. (2003) AtDUR3 encodes a new type of high-affinity urea/H+ symporter in Arabidopsis. Plant Cell 15, 790–800. Lohaus, G., Pennewiss, K., Sattelmacher, B., Hussmann, M. and Muehling, K.H. (2001) Is the infiltration-centrifugation technique appropriate for the isolation of apoplastic fluid? A critical evaluation with different plant species. Physiologia Plantarum 111, 457–465. Lorenzen, I., Aberle, T. and Plieth, C. (2004) Salt stress-induced chloride flux: a study using transgenic Arabidopsis expressing a fluorescent anion probe. Plant Journal 38, 539–544. Love J., Dodd, A.N. and Webb, A.A.R. (2004) Circadian and diurnal calcium oscillations encode photoperiodic information in Arabidopsis. Plant Cell 16, 956–966.
SOLUTE TRANSPORT ACROSS PLANT MEMBRANES
71
Luu, D.T. and Maurel, C. (2005) Aquaporins in a challenging environment: molecular gears for adjusting plant water status. Plant Cell and Environment 28, 85–96. MacRobbie, E.A.C. (1971) Fluxes and compartmentation in plant cells. Annual Review of Plant Physiology 22, 487–502. MacRobbie, E.A.C. (2006) Osmotic effects on vacuolar ion release in guard cells. Proceedings of the National Academy of Sciences of the United States of America 103, 1135–1140. Mancuso, S. and Marras, A.M. (2006) New solid state microsensors in plant physiology. In: Plant Electrophysiology – Theory and Methods (ed Volkov, V.), pp. 155–172. Springer, Berlin. Marshall, J., Corzo, A., Leigh, R.A. and Sanders, D. (1994) Membrane potential-dependent calciumtransport in right-side-out plasma membrane vesicles from Zea mays L. roots. Plant Journal 5, 683–694. Martin, S.W., Glover, B.J. and Davies, J.M. (2005) Lipid microdomains – plant membranes get organized. Trends in Plant Science 10, 263–265. Maudoux, O., Batoko, H., Oecking, C., et al. (2000) A plant plasma membrane H+ -ATPase expressed in yeast is activated by phosphorylation at its penultimate residue and binding of 14-3-3 regulatory proteins in the absence of fusicoccin. Journal of Biological Chemistry 275, 17762–17770. McAinsh, M.R., Webb, A.A.R., Staxen, I., Taylor, J.E. and Hetherington, A.M. (1995) Stimulusinduced oscillations in guard-cell cytosolic-free Ca2+ . Plant Cell 7, 1207–1219. McMahon, H.T. and Gallop, J.L. (2005) Membrane curvature and mechanisms of dynamic cell membrane remodelling. Nature 438, 590–596. Meckel, T., Hurst, A.C., Thiel, G. and Homann, U. (2004) Endocytosis against high turgor: intact guard cells of Vicia faba constitutively endocytose fluorescently labelled plasma membrane and GFP-tagged K+ -channel KAT1. Plant Journal 39, 182–193. Messerli, M.A., Robinson, K. and Smith, P.J.S. (2006) Electrochemical sensor applications to the study of molecular physiology and analyte flux in plants. In: Plant Electrophysiology – Methods and Techniques (ed Volkov, V.), pp. 73–108. Springer, Berlin. Miller, A.J. and Wells, D.M. (2006) Electrochemical methods and measuring transmembrane ion gradients. In: Plant Electrophysiology – Methods and Techniques (ed Volkov, V.), pp. 15–34. Springer, Berlin. Miller, A.J. and Zhou, J.J. (2000) Xenopus oocytes as an expression system for plant transporters. Biochimica et Biophysica Acta – Biomembranes 1465, 343–358. Moore, I., Samalova, M. and Kurup, S. (2006) Transactivated and chemically inducible gene expression in plants. Plant Journal 45, 651–683. Muhling, K.H. and Lauchli, A. (2000) Light-induced pH and K+ changes in the apoplast of intact leaves. Planta 212, 9–15. Muhling, K.H. and Lauchli, A. (2002) Determination of apoplastic Na+ in intact leaves of cotton by in vivo fluorescence ratio-imaging. Functional Plant Biology 29, 1491–1499. Muhling, K.H., Wimmer, M. and Goldbach, H.E. (1998) Apoplastic and membrane-associated Ca2+ in leaves and roots as affected by boron deficiency. Physiologia Plantarum 102, 179– 184. Murphy, D.J. (1982) The importance of non-planar bilayer regions in photosynthetic membranes and their stabilisation by galactolipids. FEBS Letters 150, 19–26. Nelson, T., Tausta, S.L., Gandotra, N. and Liu, T. (2006) Laser microdissection of plant tissue. Annual Review of Plant Biology 57, 451–475. Newman, I.A. (2001) Ion transport in roots: measurement of fluxes using ion-selective microelectrodes to characterize transporter function. Plant Cell and Environment 24, 1–14. Newman, I.A., Kochian, L.V., Grusak, M.A. and Lucas, W.J. (1987) Fluxes of H+ and K+ in corn roots – characterization and stoichiometries using ion-selective microelectrodes. Plant Physiology 84, 1177–1184. Ng, C.K.Y., Carr, K., McAinsh, M.R., Powell, B. and Hetherington, A.M. (2001) Drought-induced guard cell signal transduction involves sphingosine-1-phosphate. Nature 410, 596–599. Niemietz, C.M. and Tyerman, S.D. (2002) New potent inhibitors of aquaporins: silver and gold compounds inhibit aquaporins of plant and human origin. FEBS Letters 531, 443–447.
72
PLANT SOLUTE TRANSPORT
Obrdlik, P., El-Bakkoury, M., Hamacher, T., et al. (2004) K+ channel interactions detected by a genetic system optimized for systematic studies of membrane protein interactions. Proceedings of the National Academy of Sciences of the United States of America 101, 12242–12247. Ogden, D.C. (ed) (1994) Microelectrode Techniques – The Plymouth Workshop Handbook. Company of Biologists, Cambridge, UK. Opekarova, M. and Tanner, W. (2003) Specific lipid requirements of membrane proteins – a putative bottleneck in heterologous expression. Biochimica et Biophysica Acta – Biomembranes 1610, 11–22. Palmgren, M.G. and Christensen, G. (1993) Complementation in situ of theyeast plasma-membrane H+ -ATPase gene pma1 by an H+ -ATPase gene from a heterologous species. FEBS Letters 317, 216–222. Pantoja, O. and Smith, J.A.C. (2002) Sensitivity of the plant vacuolar malate channel to pH, Ca2+ and anion-channel blockers. Journal of Membrane Biology 186, 31–42. Parker, D.R., Zelazny, L.W. and Kinraide, T.B. (1987) Improvements to the program Geochem. Soil Science Society of America Journal 51, 488–491. Pei, Z.M., Kuchitsu, K., Ward, J.M., Schwarz, M. and Schroeder, J.I. (1997) Differential abscisic acid regulation of guard cell slow anion channels in Arabidopsis wild-type and abi1 and abi2 mutants. Plant Cell 9, 409–423. Peiter, E., Maathuis, F.J.M., Mills, L.N., et al. (2005) The vacuolar Ca2+ -activated channel TPC1 regulates germination and stomatal movement. Nature 434, 404–408. Qiu, Q.S., Guo, Y., Dietrich, M.A., Schumaker, K.S. and Zhu, J.K. (2002) Regulation of SOS1, a plasma membrane Na+ /H+ exchanger in Arabidopsis thaliana, by SOS2 and SOS3. Proceedings of the National Academy of Sciences of the United States of America 99, 8436–8441. Qiu, Q.S., Guo, Y., Quintero, F.J., Pardo, J.M., Schumaker, K.S. and Zhu, J.K. (2004) Regulation of vacuolar Na+ /H+ exchange in Arabidopsis thaliana by the salt-overly-sensitive (SOS) pathway. Journal of Biological Chemistry 279, 207–215. Rhee, S.Y., Dickerson, J. and Xu, D. (2006) Bioinformatics and its application in plant biology. Annual Review of Plant Biology 57, 303–333. Roberts, S.K. (2006) Plasma membrane anion channels in higher plants and their putative functions in roots. New Phytologist 169, 647–666. Robinson, K.R. and Hinz, G. (2001) Organelle isolation. In: Plant Cell Biology – A Practical Approach (eds Hawes, C. and Satiat-Jeunemaitre, B.), pp. 295–324. Oxford University Press, Oxford Roos, W. (2000) Ion mapping in plant cells – methods and applications in signal transduction research. Planta 210, 347–370. Sakmann, B. and Neher, E. (eds) (1995) Single-Channel Recording. Plenum Press, New York. Sakurai, J., Ishikawa, F., Yamaguchi, T., Uemura, M. and Maeshima, M. (2005) Identification of 33 rice aquaporin genes and analysis of their expression and function. Plant and Cell Physiology 46, 1568–1577. Salt, D.E. (2004) Update on plant ionomics. Plant Physiology 136, 2451–2456. Schnizler, K., Kuster, M., Methfessel, C. and Fejtl, M. (2003) The roboocyte: automated cDNA/mRNA injection and subsequent TEVC recording on Xenopus oocytes in 96-well microtiter plates. Receptors and Channels 9, 41–48. Sentenac, H., Bonneaud, N., Minet, M., et al. (1992) Cloning and expression in yeast of a plant potassium-ion transport-system. Science 256, 663–665. Shabala, S. (2006) Use of non-invasive ion-selective microelectrode techniques for the study of plant development. In: Plant Electrophysiology – Theory and Methods (ed Volkov, V.), pp. 35–72. Springer, Berlin. Shaw, S.L. (2006) Imaging the live plant cell. Plant Journal 45, 573–598. Singer, S.J. and Nicholson, G.L. (1972) The fluid mosaic model of the structure of cell membranes. Science 175, 720–731. Staehelin, L.A. and Newcomb, E.H. (2000) Membrane structure & membranes organelles. In: Biochemistry and Molecular Biology of Plants (eds Buchanan, B.B., Gruissem, W. and Jones, L.R.), pp. 358–410. American Society of Plant Physiologists, Rockville, MD.
SOLUTE TRANSPORT ACROSS PLANT MEMBRANES
73
Storey, R. and Leigh, R.A. (2004) Processes modulating calcium distribution in citrus leaves. An investigation using x-ray microanalysis with strontium as a tracer. Plant Physiology 136, 3838– 3848. Sze, H. (1985) H+ -translocating ATPase: advances using membrane vesicles. Annual Review of Plant Biology 36, 175–208. Tester, M. (1997) Techniques for studying ion channels: an introduction. Journal of Experimental Botany 48, 353–359. Tomos, A.D. and Leigh, R.A. (1999) The pressure probe: a versatile tool in plant cell physiology. Annual Review of Plant Physiology and Plant Molecular Biology 50, 447–472. Tornroth-Horsefield, S., Wang, Y., Hedfalk, K., et al. (2006) Structural mechanism of plant aquaporin gating. Nature 439, 688–694. Tournaire-Roux, C., Sutka, M., Javot, H., et al. (2003) Cytosolic pH regulates root water transport during anoxic stress through gating of aquaporins. Nature 425, 393–397. Tyree, M.I., Koh, S. and Sands, P. (2005) The determination of membrane transport parameters with the cell pressure probe: theory suggests that unstirred layers have significant impact. Plant Cell and Environment 28, 1475–1486. Uemura, M., Tominaga, Y., Nakagawara, C., Shigematsu, S., Minami, A. and Kawamura, Y. (2006) Responses of the plasma membrane to low temperatures. Physiologia Plantarum 126, 81–89. Uozumi N. (2001) Escherichia coli as an expression system for K+ transport systems from plants. American Journal of Physiology – Cell Physiology 281, 733–739. Valiyaveetil, F.I., Zhou, Y.F. and Mackinnon, R. (2002) Lipids in the structure, folding, and function of the KcsA K+ channel. Biochemistry 41, 10771–10777. Verkman, A.S. (1995) Optical methods to measure membrane-transport processes. Journal of Membrane Biology 148, 99–110. Very, A.A. and Davies, J.M. (2000) Hyperpolarization-activated calcium channels at the tip of Arabidopsis root hairs. Proceedings of the National Academy of Sciences of the United States of America 97, 9801–9806. Vogelzang, S.A. and Prins, H.B.A. (1992) Plasmalemma patch clamp experiments in plant-root cells – procedure for fast isolation of protoplasts with minimal exposure to cell-wall degrading enzymes. Protoplasma 171, 104–109. Walker, N.A. and Pitman, M.G.(1976) Measurement of fluxes across membranes. In: Encyclopedia of Plant Physiology, Vol. 2: Transport in Cells II, Part A: Cells (eds L¨uttge, U. and Pitman, M.G.), pp. 93–126. Springer, Berlin. Wandrey M., Trevaskis B., Brewin N. and Udvardi M.K. (2004) Molecular and cell biology of a family of voltage-dependent anion channel porins in Lotus japonicus. Plant Physiology 134, 182–193. Wang, X.B. and Li, M. (2003) Automated electrophysiology: high throughput of art. Assay and Drug Development Technologies 1, 695–708. Wang, X.M. (2005) Regulatory functions of phospholipase D and phosphatidic acid in plant growth, development, and stress responses. Plant Physiology 139, 566–573. Wegner, L.H. and Raschke, K. (1994) Ion channels in the xylem parenchyma of barley roots – a procedure to isolate protoplasts from this tissue and a patch-clamp exploration of salt passageways into xylem vessels. Plant Physiology 105, 799–813. Wegner, L.H., Sattelmacher, B., Lauchli, A. and Zimmermann, U. (1999) Trans-root potential, xylem pressure, and root cortical membrane potential of ‘low-salt’ maize plants as influenced by nitrate and ammonium. Plant Cell and Environment 22, 1549–1558. White, P.J. and Tester, M. (1994) Using planar-lipid bilayers to study ion channels. Physiologia Plantarum 91, 770–774. Yeo, A.R., Yeo, M.E. and Flowers, T.J. (1987) The contribution of an apoplastic pathway to sodium uptake by rice roots in saline conditions. Journal of Experimental Botany 38, 1141–1153. Yool, A.J., Brokl, O.H., Pannabecker T.L., Dantzler W.H. and Stamer, W.D. (2002) Tetraethylammonium block of water flux in aquaporin-1 channels expressed in kidney thin limbs of Henle’s loop and a kidney-derived cell line. BMC Physiology 2, 4, Epub. www.biomedcentral.com/14726793/2/4.
74
PLANT SOLUTE TRANSPORT
Zhang, W.H., Rengel, Z. and Kuo, J. (1998) Determination of intracellular Ca2+ in cells of intact wheat roots: loading of acetoxymethyl ester of Fluo-3 under low temperature. Plant Journal 15, 147–151. Zhu, J.K. (2000) Genetic analysis of plant salt tolerance using Arabidopsis. Plant Physiology 124, 941–948. Zimmermann, H.M., Hartmann, K., Schreiber, L. and Steudle, E. (2000) Chemical composition of apoplastic transport barriers in relation to radial hydraulic conductivity of corn roots (Zea mays L.). Planta 210, 302–311.
5 Transport across plant membranes F. J. Maathuis
5.1
Introduction
In the early nineteenth century, osmosis was discovered – a phenomenon that clearly pointed to a selective barrier between the outside and inside of a cell. Yet it was not until 1877 that the botanist Pfeffer proposed the membrane theory of cell physiology, which assumed the presence of a bag-like lipid structure with semipermeable properties (see Sections 3.3.2 and 4.2.1). This description gave a rudimentary basis for the selective influx and efflux of solutes at a cellular level. However, the suggestion that cell membranes (mainly) consist of lipids had to be revised in the light of the observed high permeability to charged particles such as K+ ions, and the concept was developed that membranes contain ‘pores’ dedicated to the movement of particular solutes. Thus, the notion of specific transport proteins was born and has been extensively refined over the ensuing decades, resulting in a generally accepted concept for cellular membranes: a fluid mosaic of lipids arranged in a bilayer interspersed with a plethora of proteins that function in transport, signalling and cell structure (see Section 4.2.2). Clearly then, it is a membrane, or more precisely the plasma membrane, that forms the barrier between ‘inside’ and ‘outside’ of the cell and, by extension, between ‘life’ and ‘death’. The selectivity and transport functions of membranes ensure that integrity is maintained not only at the cellular level, but also inside cells, where specific functions need to be compartmentalised. For a typical plant cell, this results in a complex system of membranes that includes the aforementioned plasma membrane at the cell periphery, a vacuolar membrane or tonoplast, mitochondrial (see Section 7.3), chloroplast (see Section 7.2) and peroxisomal (see Section 7.4) membranes and internal membranous structures such as the Golgi and ER systems. All these membranes, by their very nature of functioning as barriers, are heavily involved with the movement of solutes, but their transport mechanisms are tailored to specific inter- and intra-cellular requirements. It is obvious that, in many respects, chloroplastic thylakoid membranes involved in light reactions will contain different transport mechanisms from guard cell plasma membranes. The former will need redox-driven proton pumps to convert light energy into chemical energy, whereas the latter will need robust K+ and Cl− transport systems to generate large turgor changes. It is also apparent that plasma membranes in root cells, where soil nutrients are retrieved, will predominantly contain uptake systems for such minerals. On
76
PLANT SOLUTE TRANSPORT
the other hand, xylem parenchyma cells that transfer minerals to the xylem for subsequent translocation to the shoot, are more likely to mediate a net efflux function. In addition, the energetics of transport will vary greatly. The flux of some solutes may already ‘want to go’ in the desired direction, for example due to a large diffusion gradient. The influx or extrusion of others may be against a gradient and therefore requires expenditure of energy. Thus, transport system composition, directionality and energetics all vary as a function of the solute itself, local cellular and intracellular requirements and environmental conditions. At a higher level, specific adaptations in plant species may also include transport systems that are found in one species but not another. In spite of the differences discussed above, there will also be many parallels: many basic cellular functions, including transport across membranes, are essentially similar irrespective of the cell type, species or even the kingdoms of life. For example, the conversion of trans-membrane H+ gradients into chemical energy in the form of ATP is mediated by F 1 F 0 H+ -ATP synthases that are essentially the same whether derived from bacteria, plants or humans.
5.1.1
Plant solutes
Plants move or transport many substances ranging from the simple hydrogen ion (H+ ) to very complicated organic compounds such as sugars and amino acids (see Chapter 2), and a broad division can be made between organic and inorganic solutes. This chapter will mainly focus on simple inorganic solutes which often constitute minerals that are essential to plants, but the principles discussed are equally valid for organic solutes. The primary inorganic solutes include both cations (e.g. K+ , Na+ , NH 4 + , Ca2+ and Mg2+ ) and anions (e.g. NO 3 − , Cl− , PO 4 3− and SO 4 2− ). Transport of other inorganic solutes such as trace metals and organic solutes such glycerol, sugars, amino acids and xenobiotics is also of crucial importance to plant physiology but these will only be mentioned briefly.
5.1.2
Definitions and terminology
For mechanisms of membrane transport, several systems of classification exist. Often these have historical origins and, although they persist, they are not always still appropriate. In addition, none of the classifications is unambiguous, which can lead to confusion. An example is the division between ‘transporters’ and ‘ion channels’ based on outdated assumptions that carriers and pumps (see below) bind a substrate and subsequently ‘transport’ it to the opposite side of the membrane, whereas ion channels simply provide a diffusive pore. It is now known that channels also bind their substrate and that the F 0 part of the F 1 F 0 H+ -ATPase can function as a H+ channel. Indeed, many formalisms that describe the kinetic behaviour of channels can equally be used to describe carriers and pumps and vice versa. The convention adopted here will be that any membrane protein involved in cross-membrane movement of substrates is a transporter.
TRANSPORT ACROSS PLANT MEMBRANES
77
The first useful classification of transporters refers to active transport and passive transport (Colour plate 5.1a), a distinction that is often made to refer to the direction of movement of a solute with respect to its electrochemical gradient. Left to its own device, any solute will move from a higher to a lower electrochemical potential, or ‘down hill’ in energetic terms. When such movement occurs across membranes it is referred to as passive transport. In contrast, to move a solute from lower to higher electrochemical potential, energy input is required and such ‘up hill’ transport is therefore termed active. There are two potential sources of confusion with these definitions of active and passive transport that can generate misconceptions: frequently ‘passive’ and ‘active’ are believed to mean ‘no energy necessary (i.e. ‘free transport’) and ‘energy necessary’. Although the latter is true, passive transport, as we shall see below, often dissipates trans-membrane gradients that have to be maintained at the expense of energy. In other words, although the transport of a particular solute may in itself be passive, it often indirectly requires energy expenditure by a cell. Secondly, the terms passive and active, which strictly refer to thermodynamic properties of solute fluxes, are regularly associated with specific transport mechanisms. Clearly, passive transporters can never mediate active transport, this would violate the second law of thermodynamics, but active transporters can, and probably will in many conditions, function as purely dissipative and therefore as passive systems. Indeed, transporters have been described that can switch between active and passive modes such as the mitochondrial triose phosphate/nucleotide sugar transporter. The second classification refers to primary and secondary transport (Colour plate 5.1b). Primary transport moves solutes against their electrochemical gradient at the expense of ‘metabolic’ energy. The latter can be redox energy, for example in the form of pyruvate in the mitochondrial respiratory chain, which is converted into an electrochemical proton (H+ ) potential by redox-energy-driven pumps, such as cytochrome oxidase. It can also be in the form of solar energy, used to generate H+ gradients during photosynthesis. In its most familiar form, primary transport uses chemical energy derived from compounds such as ATP. In mammalian cells, the primary K+ -Na+ -ATPase uses around 25% of all generated ATP to maintain transmembrane K+ and Na+ gradients. In plants, ATP-fuelled primary transport across plasma and vacuolar membranes generates transmembrane electrochemical H+ gradients (Colour plate 5.1b). The energy stored in this ‘H+ battery’ can then be used to transport further solutes via specific carriers, which couple down hill reflux of H+ to the movement of other solutes. Such mechanisms, where dissipation of a primary pump-maintained gradient is coupled to the movement of another solute, are referred to as secondary transport (Colour plate 5.1b). The latter can be active, when the substrate moves up its electrochemical gradient, or passive, for example when ions move down their electrochemical gradients through ion channels. In plants, primary transport in the form of ATPase pumps typically establishes H+ gradients and, unsurprisingly, most coupled secondary transport uses these H+ gradients to move other solutes. In animals, the predominant primary pump extrudes Na+ from the cytoplasm and, consequently, most secondary transport in animals is run on ‘sodium batteries’.
78
PLANT SOLUTE TRANSPORT
The third classification system is based on the transport mechanism of transporter proteins themselves and includes three main types: pumps, ion channels and carriers (Colour plate 5.1c). Pumps normally are active systems that use chemical, light or redox energy to move substrates against their electrochemical gradient, typically at a rate of a few hundred per second. They fulfil many functions in cells such as generating gradients for secondary transport, extruding cytoplasmic Ca2+ and maintaining ionic homeostasis. Ion channels are purely dissipative and therefore genuinely passive transport systems. They can move substrates (ions) at astonishing rates of several million per second and are ideally suited to function in fast processes such as Ca2+ signalling, propagation of impulses along nerve cells and relaying sensory input. The large transport capacity of ion channels means they are also ideally suited to processes that need movement of large quantities of ions, such as the uptake of important plant nutrients, maintaining turgor and in turgor driven cellular movement. The third group, carriers, forms a rather non-descript collection of transport mechanisms best defined as ‘not being a pump or a channel’ and includes secondary active transporters. The carrier concept stems from classical enzyme kinetics describing rate constants and affinities of substrate binding and release sites on either side of a membrane. Carriers can mediate passive or active transport and a valid question is therefore why cells would need two forms of passive transport system: both ion channels and passive carriers. The answer may have to do with the way different types of transporter confer selectivity for their substrate. Rapid progress has recently been made in determining crystal structures of various membrane transport proteins and this has shed much light on the mechanisms underlying ion selectivity (Gouaux and MacKinnon, 2005). Broadly generalising, ion channels contain large water filled pores as part of their architecture, which allows free travel for (hydrated) ions well into the membrane bilayer. The selectivity filter, which only spans a fraction of the bilayer thickness, is the only restriction to free diffusion and is the only site in passing through the channel at which ions are dehydrated. The combination of electrostatic interactions of the dehydrated ion with charged side chain groups and the filter size determines ion selectivity in ion channels. In contrast, pumps and carriers often lack solvent-filled cavities. In these cases, dehydrated ions are forced to follow a predominantly proteinaceous pathway where conformational changes impact the affinity of binding sites in the carrier. This arrangement leads to considerably slower transport when compared to ion channels but precludes any chance of opening ion pathways to both sides of the membrane at the same time (Gouaux and MacKinnon, 2005). Thus, although channels can be remarkably selective for specific ions, selectivity is nevertheless largely based on the simple concept of size exclusion. Carriers and pumps have ‘proper’ binding sites based on three-dimensional geometry of enzyme and substrate. The latter can therefore have much higher substrate affinities and be far more specific. For example, carriers can discriminate between different sugar molecules in spite of similar sizes or they can distinguish between l and d stereoisomers of amino acids. This high degree of selectivity comes at a cost
TRANSPORT ACROSS PLANT MEMBRANES
79
of lower turnover rates, hundreds or thousands per second, compared to millions per second for ion channels. The last classification, which often occurs, refers to another aspect of transport mechanisms namely the question whether only one or more than one substrate is transported (Colour plate 5.1d). In a uniport system, only one type of substrate is moved from one side of the membrane to the other. Uniport mechanisms are therefore by definition passive systems and include all ion channels and a number of carrier systems. In a symport mechanism, the transport of two or more substrates is coupled to each other and all substrates are moved in the same direction. When there is counterflow of substrates a system is referred to as antiport. An example of a uniport system is an ion channel: one type of substrate moving in a file through the channel pore in one direction (in fact there are many ion channels with multi-ion pores that transfer different types of ion at the same time but there is no strict coupling between the two types of ion). Symporters are normally active transport systems that use downhill movement of, for instance H+ , to drive transport of other substrates. Good examples are the plant sucrose:H+ symporters that move sugars from one compartment to another. Many antiport systems have been described in plants; one of the best characterised is NHX1, a system that exchanges one H+ for one Na+ ion, and functions in the vacuolar sequestration of Na+ .
5.1.3
Some formalisms
To understand the distinctions made by various classification systems and how cells run their membrane transport economy, it is necessary to examine some of the fundamental physical concepts that deal with diffusion, energetics and electrochemistry. The action of ATP driven primary H+ pumps in plant cells – and K+ -Na+ pumps in animal cells – has as one corollary that cell interiors are negatively charged (but some other factors also contribute to this phenomenon) with respect to the extracellular compartment. Therefore, cells maintain a voltage difference across the plasma membrane, which in plant cells is typically between −100 and −200 mV. Smaller transmembrane voltages exist across the tonoplast, many plastid membranes and probably endomembranes of the ER and Golgi, although the latter have not been determined. The existence of a trans-membrane voltage (E m ) has large implications for transport of charged solutes across these membranes. The driving force for transport of ions across membranes is determined by two parameters: the chemical gradient, i.e. the difference between the external and cytoplasmic concentration, and the electrical gradient, i.e. the cell membrane voltage. Combined, these two forces are expressed as an electrochemical ion potential (μ). If μ is lower outside the cell than inside, uptake of the ion will require energy and thus has to be active. If μ is higher outside, its uptake can proceed passively (but it does not necessarily do so). At equilibrium, conditions are such that the electrochemical potential is zero, which implies that the chemical and electrical forces are opposite and cancel each other out.
80
PLANT SOLUTE TRANSPORT
Now, a short digression into the physics of diffusion. Because of the kinetic energy, molecules are constantly moving (unless the temperature is at absolute zero). This inevitably means that any collection of molecules will distribute itself randomly across all possible positions in space. So if it were physically possible to introduce a number of gas molecules in one corner of an enclosed container, before long the collection of molecules would have spread throughout the entire space and, this being the equilibrium state, would remain so. Thus, diffusion can be formalised as a tendency of any substance to equalise its distribution. This in turn means that a concentration difference of any substance will dissipate if there is free movement of particles. Diffusion through a barrier such as a biological membrane will depend on two parameters: (i) the magnitude of the concentration difference and (ii) the permeability of the membrane for that particular substance. Permeability itself is governed by the resistance of the membrane and its thickness. Clearly a very ‘tightly’ constructed membrane will have a larger resistance than a porous membrane. Similarly, a very thick membrane impedes flow of particles more than a very thin membrane. These properties are incorporated into the diffusion coefficient (D, in m2 sec−1 ), which is specific to any particle and the medium the particle diffuses through. Overall, these concepts are formalised in Fick’s (first) law (see also Chapter 3): Js = −Ds
dCs , dx
(5.1)
which intuitively states that the flux Js of a solute s depends on its diffusion coefficient Ds and its concentration gradient (the variation of Cs per change in space x). Secondly, since ions are solutes with a charge their movement is influenced not only by the diffusion properties described in Eq. 5.1 but also by any electrical field. This force–flux relationship is analogous to that mentioned above for diffusion, only the driving force is the electrical field rather than a concentration gradient and the proportionality constant is slightly different. Js = −μs Cs
dE , dx
(5.2)
where μs is a constant analogous to Ds and dE/dx is the electrical gradient or electrical field. Nernst and Planck incorporated this term, describing flux as a function of the electrical field that acts on a charged particle, into Fick’s law resulting in the Nernst-Planck ‘electrodiffusion’ relationship: Js = −Ds
dCs dE − μs C s . dx dx
(5.3)
In other words, (electro)diffusion of a charged particle depends on its chemical gradient and on the electrical field (voltage difference). When ion transport is studied, it is often the current (flux of charge per unit time) rather than the flux that is the point of interest, since it is often current that is the experimental parameter under investigation and Eq. 5.3 can be multiplied by Faraday’s constant F (see Section 3.5.1) and ionic valence of S, z s , included to yield
TRANSPORT ACROSS PLANT MEMBRANES
81
a relationship that expresses ionic current as a function of concentration and voltage: dCs F z s Cs d E Is = −z s FDs + , (5.4) dx RT d x where R is the gas constant and T is the absolute temperature. At equilibrium, Is = 0 and after rearranging and integration, Eq. 5.4 reduces to the Nernst equation (Section 3.5.4): + S RT E= ln + out , (5.5) zs F [S ]in which shows that at equilibrium the concentration ([S+ ] out /[S+ ] in ) and electrical force (E) are equal and opposite thus cancelling each other out. At equilibrium, i.e. the condition where the net flux across the membrane is zero, E (the ‘Nernst potential’) is exactly the voltage where the current reverses. This is often referred to as the Nernst potential of a specific ion or simply as E K for potassium or E Na for sodium. We can rearrange Eq. 5.5 and substitute room temperature and z = 1 to get: + I (5.6) E = 58 log + out , [I ]in for a monovalent cation. We can now see that a 10 times concentration gradient is equivalent to around 60 mV electrical force or, vice versa, that 120 mV electrical force equates to a 100 times chemical gradient. For example, if we assume a typical value for the membrane potential E m of –120 mV, we can immediately derive that passive K+ accumulation (or of any other monovalent cation) is limited to 100 times [K+ ] ext . K+ accumulation to levels higher than 100 times [K+ ] ext therefore requires alternative modes of energisation and relies on active transport. Equation 5.4 can also be used to derive another important formalism that is frequently applied to assess selectivity of membranes or of specific transport systems (Chapter 3). The so called Goldman Hodgkin Katz voltage equation gives the membrane potential (E rev ) at which no net current flows. This parameter is experimentally relatively easy to obtain and, in combination with known ionic concentrations of the permeant ions, for example K+ , Na+ and Cl− , can be used to resolve the relative permeabilities P K , P Na and P Cl according to: PK [K]o + PNa [Na]o + PCl [Cl]i RT ln E rev = . (5.7) zF PK [K]i + PNa [Na]i + PCl [Cl]o
5.2 5.2.1
Passive transport Diffusion through membranes
Passive transport mediates a solute flux in the direction of a lower (electro)chemical potential. Diffusion is therefore by definition a passive process. Nevertheless, it is a crucially important phenomenon for all life. For example, diffusion of inorganic
82
PLANT SOLUTE TRANSPORT
minerals in the soil solution is often a limiting factor for plant nutrition, whereas many smaller cells (e.g. bacteria) rely on diffusion for the cytoplasmic distribution of solutes. Substances can cross membranes by diffusion if they can dissolve in the oily interior of the membrane. Such lipophilic (or hydrophobic) substances include important compounds like O 2 , CO 2 , H 2 O 2 and NH 3 . For example O 2 –CO 2 gas exchange in lungs and in photosynthesising plant tissues operates by this process (Colour plate 5.2a). Another example is the plant hormone ethylene, which plays important role in stress response and in fruit ripening. These processes rely on the physical properties of lipid membranes and on the chemical and physical properties of the diffusing molecule. Such processes do not involve specific proteins (Colour plate 5.2a) and are therefore not submitted to any significant level of regulation.
5.2.2
Facilitated diffusion through carriers
An obvious disadvantage of relying on simple diffusion is the total lack of control which cells can exert on the flux of substances that move by this process. Organisms have therefore developed specific transport systems that allow diffusion across membranes to occur through dedicated proteins. Clearly, such systems can function only when the overall membrane permeability for the particular compound is relatively low, which is certainly the case for charged particles (ions) and also for many important substances such as sugars. Plant cells use facilitated diffusion through carrier-type transporters, through ion channels and through water channels. Ion and water channels will be dealt with in more detail below and the focus here is on some plant carrier systems that mediate facilitated diffusion. Nitrogen is required by plants in vast quantities and many groups have studied the mechanism and identity of nitrogenous compounds that are taken up by plant roots. Most plants acquire N in either of two forms: as nitrate (NO 3 − ) or ammonium (NH 4 + ) ions, or a mixture of the two. The translocation of NH 4 + is mediated by proteins of several transport families each containing multiple isoforms. Recently, one isoform of the tomato AMT (ammonium transporter) family (LeAMT1;1) was heterologously expressed in oocytes of Xenopus laevis (Ludewig et al., 2002), a convenient system to perform voltage clamp experiments (see Section 4.4.5.2). Inward current could be observed when micromolar amounts of NH 4 + were added to the external medium showing (i) net positive charge was entering the oocyte interior and (ii) the transporter has a high affinity. Subsequently, the authors showed that the inward current was not sensitive to any other ion which might act as a coupled driving force. The conclusion, therefore, was that NH 4 + is transported into the cell via a carrier-type uniport mechanism (Colour plate 5.2b), an excellent example of facilitated diffusion. A second example of a putative carrier that mediates facilitated diffusion is HKT1. HKT1 is probably expressed in the plasma membrane and contains seven to nine transmembrane domains (TMD). In arabidopsis, there is only one HKT isoform, but in other species such as rice, the HKT family extends to seven or eight members. Initially, HKT1 was characterised as a K+ :Na+ symporter (Rubio
TRANSPORT ACROSS PLANT MEMBRANES
83
et al., 1995), but it has become increasingly evident that at least in arabidopsis, HKT1 only transports Na+ (M¨aser et al., 2002; Berthomieu et al., 2003). Thus, although there may be conditions where HKT1 can function as a K+ :Na+ symport mechanism, it appears that in vivo, HKT1 binds a Na+ ion to both binding sites which makes it kinetically equivalent to a uniport mechanism that mediates facilitated Na+ diffusion. The physiological relevance of this system is still under debate. Antisense expression of this transporter in wheat led to a decrease in unidirectional Na+ influx (Laurie et al., 2003) providing direct evidence that it functions as a root Na+ uptake mechanism. In arabidopsis, there is the suggestion that AtHKT1 may function in Na+ translocation from root to shoot and vice versa (M¨aser et al., 2002; Berthomieu et al., 2003).
5.2.3
Transport through ion channels
Ion channels (Colour plate 5.3) are integral membrane proteins that allow ions to pass when the protein is in the open state. Channels function as regulated pores and, simplistically put, all they do is be open (conduct) or closed. So, in contrast to many carriers and all pumps, ion channels are purely passive transporters. Opening and closing, or gating, of ion channels can depend on many factors but roughly speaking there are voltage-gated and ligand-gated channels and a third group is formed by mechanosensitive channels. Voltage-gated channels (Colour plate 5.3a-c) ‘sense’ the membrane potential and increase/decrease their open probability (Po) as a function of the membrane potential, whereas ligand-gated channels (Colour plate 5.3d) only open after binding an effector molecule, the ligand, which alters the protein conformation and thus leads to channel opening. Mechanosensitive channels play important roles in mammalian functions such as touch and hearing, whereas in plants they are envisaged to sense processes such as turgor-related changes in cell volume. In all ion channels, the pore domain constitutes the transmembrane aperture through which ions are conducted. The pore is usually water-filled, which makes it an attractive environment where ions can diffuse across the membrane. One region in the pore forms the selectivity filter (Colour plate 5.3a), an area that determines which ions are allowed through the pore. There are three main characteristics that define an ion channel: channel conductance, channel selectivity and channel gating (Hille 2001). Conductance G is the reciprocal of resistance R defined in Ohm’s law as: V = IR
or
V = I /G
(5.8)
with V the voltage expressed in volts (V) and I the current expressed in amperes (A). Conductance is expressed in siemens (S) and for ion channels is typically in the range of pS. The larger the conductance, the bigger the flux of ions that can pass through the channel. Often ion channel nomenclature refers to the most permeant ion, or the most permeant and physiologically relevant ion. Which ion permeates will depend on channel selectivity, which is typically defined by the selectivity filter, an area that provides a physical barrier and filters on the basis of ion size but also on the basis
84
PLANT SOLUTE TRANSPORT
of electrostatic interactions between the permeating ion and charged residues of the channel protein. Thus, cation channels typically show negative residues lining the channel pore, whereas anion channels contain positive charges in this region. In voltage-gated channels, opening of the pore strictly depends on changes in membrane potential E m . A decrease in membrane polarisation, depolarisation, stimulates opening of depolarisation-activated channels (Colour plate 5.3b), whereas increased membrane polarisation, hyperpolarisation, leads to opening of hyperpolarisation-activated channels. The link that connects changes in E m to channel gating is provided by a voltage sensor domain (Colour plate 5.3a), typically a transmembrane alpha helix with a large number of charged residues. Under the influence of changes in E m , movement of this domain translates into conformational changes in the channel protein leading to opening or closing of the pore. Although opening of voltage-gated channels requires a change in E m , there may be many factors other than membrane voltage that impact on the channel open probability, such as the presence of second messengers, the redox state or the phosphorylation state of the channel protein. The ligand-gated ion channels constitute another main class of ion channel. In this type of transporter, gating occurs only after binding of specific compounds to the channel protein (Colour plate 5.3d). These compounds are called ligands, i.e. substances that bind to another compound to form a complex. The term agonist (literally meaning a ‘competitor’) is also frequently used since often different ligands can have similar actions and compete for the same binding site. In contrast, antagonists bind at the same site but have an opposite action to ligands. Ligand binding to the channel protein causes a conformational change that switches the channel from the closed to the open state or vice versa. Ligand binding is a minimum requirement for channel gating but, as for voltage-gated channels, overall gating properties of ligand-gated channels are often modulated by additional parameters which can include membrane polarisation (Hille, 2001). In the following section, some of the major classes of ion channel found in plants are briefly reviewed.
5.2.3.1
Potassium channels
Potassium (K+ ) channels were the first class of ion channel described in plant cells and it was found that these consisted of two major categories, inward and outward rectifying (Maathuis et al., 1997; see also Colour plate 5.4a). The inward K+ channels are activated upon membrane hyperpolarisation and form a major pathway for K+ uptake, whereas the open probability of outward channels increases when the membrane depolarises, leading to loss of K+ from the cell. Examples of major inward and outward rectifying voltage dependent channels have been cloned (see Very and Sentenac, 2001 for a review) and their overall structure resembles that of mammalian Shaker-type channels with six TMD, a voltage sensing domain in the S4 region and a pore with selectivity filter in the S5–S6 part of the channel (Colour plate 5.4b). The selectivity filter contains the conserved GYGD motif, a sequence found in virtually all ion channels that are selective for K+ , and the S4 region ensures that these K+ channels require a change in E m to transit from closed to open state. Functional channels are made up of four subunits either as homomers
TRANSPORT ACROSS PLANT MEMBRANES
85
or as heteromers. Apart from Shaker-like channels, the major families of plant K+ channels also contain two or four TMD-structured channels and voltage-independent K+ channels.
5.2.3.2
Calcium channels
Ca2+ channels have also been intensely studied in plants. In contrast to mammalian Ca2+ channels, plant Ca2+ channels are usually not very selective for Ca2+ and will also conduct many other cations such as K+ (White, 2000). Plant Ca2+ channels have mainly been characterised at the tonoplast where they are believed to play a role in Ca2+ signalling. These vacuolar Ca2+ channels consist mainly of ligand-gated channels that require IP 3 , NAADP or cADPR to be gated (White, 2000). However, one putative Ca2+ channel (TPC1) is voltage gated and has a 12 TMD structure (Peiter et al., 2005).
5.2.3.3
Non-selective ion channels
Non-selective ion channels allow passage of various ions and are often permeable to mono- and divalent ions. Plant non-selective cation channels have been characterised to some extent and generally found to be voltage independent (Demidchik et al., 2002). Although some non-selective cation channels have been shown to be regulated by cyclic nucleotides (Leng et al., 2001; Maathuis and Sanders, 2001; Balague et al., 2003), it is often not clear how their gating is controlled. These channels are believed to be important in signalling, in turgor regulation and in cation nutrition. They are of special relevance regarding plant stress since they may form a major conduit for the entry of toxic ions such as Na+ (Demidchik et al., 2002). Two gene families, cyclic nucleotide gated channels (CNGCs; Talke et al., 2003) and glutamate receptors (GLRs; Davenport, 2002), are believed to encode non-selective channels and are found in many plant species.
5.2.3.4
Chloride channels
Only one family of anion channels has been described in plants (Hechenberger et al., 1996). Members of the ChLoride Channel (CLC) family show large homology to their mammalian counterparts that are mainly involved in cellular volume regulation. Plant CLCs contain 10–12 TMD and are strongly sensitive to E m with a P o vs. V relationship that is bell shaped. Little is known about the function of plant CLCs, but they are probably involved in early events during cell signalling which frequently involve a Cl− efflux, and possibly in nitrogen nutrition since some CLCs are also capable of transporting NO 3 − (Geelen et al., 2000). A further function may be in turgor regulation and turgor-driven movement when large amounts of both cations and anions are moved across tonoplast and plasmamembrane.
5.2.4
Transport through water channels
In all forms of life, water is the solvent for cellular solutes. In addition, water in plants is necessary to generate turgor and to provide a medium for mass flow of solutes (Chapters 9 and 10). Indeed, movement of water is intricately linked to that
86
PLANT SOLUTE TRANSPORT
of ions and, as is the case for most ions, its transport is regulated and controlled. However, in contrast to ions, there are no known active transport mechanisms for water and thus water movement is always passive and directed towards a lower water potential. Although water permeability of phospholipid bilayers is substantial, it is now clear that biological membranes contain specific protein-based pathways for the movement of water. These water channels or aquaporins constitute a parallel and regulated pathway for water flux, both at the intracellular and the whole plant level (Chrispeels et al., 2001). Structurally, aquaporins have a protein topology that is very similar to Shakertype ion channels, with each subunit having six TMD. However, rather than one, aquaporin subunits have two pore-forming loops: one in the first half of the protein between TMD two and three and the other between TMD five and six (Colour plate 5.5). The second loop contains a cysteine residue where mercury can bind, leading to channel blockage. The aquaporin-specific signature motif NPA (asparagine, proline, alanine) is involved in the stabilisation of the pore-forming loops. Similar to Shaker ion channels, functional aquaporins consist of tetramers in which the eight pore loops combine to form transmembrane water-conducting paths. The water-conducting pore is around 0.30 nm wide at its narrowest point, a very close fit to the 0.28 nm size of a water molecule, and thus an efficient barrier to other substances. Apart from size exclusion, pore residues interact with the permeating water molecules mainly through H+ bonds. These structural properties ensure that aquaporins are highly selective for water molecules, which move through the protein in a single file, and that water channels are virtually impermeable to any charged species. The latter include protons, a remarkable property since protons can usually be transferred readily through water molecules. Despite this high level of substrate specificity, aquaporins can sustain very high transport rates of ∼3 × 109 water molecules per second. Although aquaporins more or less completely exclude charged species and are highly selective for water, several have been shown to be capable of transporting small non-charged solutes such as glycerol and urea. Sometimes a distinction is made between water-selective aquaporins and those that can conduct water and small solutes, the aquaglyceroporins. Comparative studies using an Escherichia coli isoform of each group showed that although both proteins were structurally and genetically highly similar, minor changes in the pore of the aquaglyceroporin result in a slightly wider selectivity filter and hence glycerol permeability (Wang et al., 2005). In plants, aquaporins are predominantly expressed in vacuolar and plasma membranes and fall into four major classes, of which some are related to their membrane location. PIPs (plasma membrane intrinsic proteins) are expressed predominantly in the plasma membrane and are subdivided into the PIP1 and PIP2 subfamilies (Johanson et al., 2001). In the tonoplast, TIPs (tonoplast intrinsic proteins) are present, with some isoforms specifically targeted to storage vacuoles, and others to lytic vacuoles. NIPs (NOD26-like intrinsic proteins) have largely unknown membrane locations apart from NOD26 itself, which is expressed in root nodules. A fourth class comprises the SIPs (small basic intrinsic proteins), whose membrane location is also largely unknown (Johanson et al., 2001). These four classes tend to be members of
TRANSPORT ACROSS PLANT MEMBRANES
87
big gene families with around 35 members in the model species arabidopsis. Such large gene families might suggest that functional redundancy is common for water channels but could also point to a need for isoform-specific expression patterns of aquaporins with finely tuned functional adaptations. There is now good evidence that both transcriptional and post-transcriptional regulation of aquaporin activity takes place in plant membranes (Luu and Maurel, 2005). For example, root hydraulic conductivity can be seen to correspond closely to PIP1 mRNA levels in Lotus japonicus (Johanson et al., 2001) and the diurnal action of motor cells that move Samanea saman leaves closely mirrors levels in PIP2 (Johanson et al., 2001). In response to salt stress, root PIPs and TIPs are rapidly down-regulated but with a time difference between PIPs and TIPs (Maathuis et al., 2003). Post-translationally, both aquaporin glycosylation and phosphorylation appear to be major mechanisms for the regulation of hydraulic conductance. While glycosylation may be involved in the recruitment of protein to the relevant membrane (Vera-Estrella et al., 2004), phosphorylation directly enhances channel activity (Chrispeels et al., 2001; Johanson et al., 2001). Other factors that impact on aquaporin activity are H+ and Ca2+ with both these ions having a blocking effect on water transport through aquaporins.
5.3
Primary active transport
In many conditions, cells require solutes in quantities that cannot be achieved through passive transport. Similarly, many waste products need to be removed or compartmentalised often against their electrochemical potential. This transport can, by definition, not occur via passive transport and requires active systems that directly use energy. A further fundamental requirement of all living cells is the capacity to convert chemical energy into electrochemical energy and vice versa. Primary active transport mechanisms convert metabolic energy to move substrates against a gradient. At the same time, many primary systems, through their activity, energise membranes by establishing electrochemical potential differences. The latter can subsequently be used to energise secondary active transport (Section 5.4).
5.3.1
Primary proton pumps
The majority of chemical energy that is generated from processes such as respiration and photosynthesis is deposited in the phospho-ester bonds of compounds like adenosine triphosphate (ATP), guanyl triphosphate (GTP) and pyrophosphate (PPi). Hydrolysis of the phosphate-ester bond is highly exergonic; for example the conversion of ATP to adenosine diphosphate (ADP) has a G◦ of –32 kJ mol−1 . This energy can be converted into other forms such as an electrochemical gradient. In plant cells, a large amount of ATP is used for transmembrane H+ movement. Extrusion of H+ from the cytoplasm has physiological rationales; for example, for cellular pH regulation, the acidification of cell walls and rhizosphere, or to lower
88
PLANT SOLUTE TRANSPORT
the pH in lytic compartments. Nevertheless, the principal function of plant H+ ATPases, or H+ pumps, is in the generation of transmembrane H+ gradients. The pH and electrical potential differences of the H+ gradient can both be used in subsequent transport processes. Plant proton ATPases, as most other pumps, have very low turnover rates of ∼100 H+ per second. This and their crucial role in cellular physiology mean proton ATPases are very prolific enzymes that can make up several percent of total protein. They are predominantly found in the plasma membrane and tonoplast and also in other endomembrane systems such as ER and Golgi complex (see also Chapter 7). Often the level of expression of these pumps is related to physiological conditions and function of tissues and cell types.
5.3.1.1
P-type ATPases
The proton pump located in the plasma membrane is a P-type ATPase (see Geisler et al. (1999), Sze et al. (1999) and Axelsen and Palmgren (2001) for reviews) so called because during its catalytic cycle, phosphorylation of a specific site at the enzyme is essential (Colour plate 5.6). In plants this enzyme generates a proton motive force (PMF) across the plasma membrane, typically in the region of 250–300 mV comprising a membrane potential of around –150 mV (negative inside the cell) and a pH of around 2 units (acidic outside the cell), which is equivalent to –120 mV. Both components of the PMF are used to energise movement of many important nutrients and metabolites through active H+ -coupled transport. In addition, the activity of P-type ATPases is a dominant contributor to membrane polarisation and therefore impacts greatly on the driving force for passive transport. The G◦ for ATP hydrolysis is around 32 kJ mol−1 . This would be equivalent to around –330 mV if it is assumed that 1 ATP is hydrolysed per H+ pumped, since G◦ = −nF E◦. with the stoichiometric coupling ratio n equal to unity, a conversion factor between mV and kJ mol−1 , the Faraday constant F, of 96.5 kJ V−1 mol−1 and E◦ the electropotential in V. However, in physiological conditions, the G for ATP hydrolysis is considerably higher and in the region of 50 kJ mol−1 , theoretically sufficient to generate a PMF of over –500 mV if n were 1. Experiments where H+ fluxes were compared with ATP hydrolysis rates indeed showed that 1 H+ is pumped for every ATP hydrolysed. P-type proton pumps are encoded by multiple-gene families and the enzyme functions in the membrane as a single polypeptide of around 100 kDa. Structurally, P-type pumps contain 10 TMD with the TMD4–TMD5 cytoplasmic loop containing the ATP binding site. The same loop also has a conserved aspartyl residue that becomes phosphorylated and dephosphorylated during every catalytic cycle. Toxins such as vanadate and arsenate mimic phosphate and inhibit the enzyme by binding to the phosphorylation site. The C-terminal residues of the protein function as an autoinhibitory domain. Cleavage of this ∼100 amino acid tail by trypsin, or expression of the shortened mutant protein, leads to activation of the enzyme. The same domain also interacts with 14-3-3 proteins that can bind to it and, through unknown mechanisms, activates the ATPase (Colour plate 5.6). The fungal toxin fusicoccin
TRANSPORT ACROSS PLANT MEMBRANES
89
is believed to stabilise the interaction between ATPase and 14-3-3 and thus activate the protein.
5.3.1.2
V-type ATPases
At the tonoplast and various endomembranes, vacuolar or V-type ATPases extrude H+ from the cytoplasm. Recently, V-type ATPases have also been localised to the plasma membrane. In contrast to the P-type, the V-type ATPase protein is remarkably complex requiring the assembly of 14 different subunits (Colour plate 5.7) and has an overall weight of ∼700 kDa. The holocomplex consists of a large head portion, V 1 , where ATP is bound and split. The basal part, V 0 , of the complex protrudes through the membrane and forms the H+ channel. In F 1 –F 0 ATP synthases, the gamma subunit is part of the stalk which transduces potential energy, from H+ travelling through the H+ channel, into ATP synthesis. How the link between the chemical (V 1 ) and electrochemical (V 0 ) energy is precisely structured in V-ATPases is unknown but it is believed that V-type ATPases are very similar to F 1 –F 0 ATP synthases, the enzymes found in mitochondria and chloroplasts that convert redox energy into chemical energy in the form of ATP (Kluge et al., 2003). V-type ATPases are believed to function as rotary motors, similar to their F 1 –F 0 ATP synthase counterparts, with the catalytic A and B subunits driving rotation of a central shaft (subunits D and F), which causes the membrane-bound c ring to rotate. Protons are picked up by the spinning c ring, pumped through conductance channels in the membrane bilayer, and released into the vacuolar lumen. The exact stoichiometry of this process is not known and may vary according to conditions but is believed to be 2 to 3 H+ per ATP hydrolysed. The PMF generated by V-ATPases is particularly important for the maintenance of passive and secondary transport across the tonoplast. The vacuole, with its large volume fraction, constitutes a crucial compartment for storage of ionic and nonionic nutrients and metabolites. In addition, it is the compartment where potentially harmful ions and substances are deposited to safeguard the cytoplasm. All these functions require tightly regulated, and often energised, transport mechanisms at the tonoplast. The trans-tonoplast PMF consists almost entirely of a pH: of the total PMF of around 200 mV, E m is typically no more than 20–30 mV (the vacuolar lumen being positive with respect to the cytoplasm) and the remainder in the form of pH (the lumen being acidic with respect to the cytoplasm). As is the case for the P-type ATPase, V-type ATPases will be expressed in tissueand cell-type-dependent patterns and both transcriptional and post-transcriptional regulation occurs in response to endogenous and external conditions. For the V-type ATPase, this is particularly well documented when plants are exposed to salinity and other abiotic stress (Dietz et al., 2001). Tonoplast-enriched vesicle preparations showed considerably higher ATPase and H+ pumping capacity when isolated from salt-stressed plants rather than plants growing in non-saline conditions (Blumwald and Poole, 1985; Blumwald and Poole, 1987; Staal et al., 1991). Later it was also shown that mRNA levels of many V-ATPase subunits are upregulated after salt stress (e.g. Maathuis et al., 2003). These observations are interpreted as an extra demand
90
PLANT SOLUTE TRANSPORT
for tonoplast energisation to drive the substantial H+ -coupled sequestration of Na+ ions in the vacuole (see also Section 14.12).
5.3.1.3
The pyrophosphatase
Plants are one of the few organisms that contain a second type of proton pump at the tonoplast, the pyrophosphatase or PPase. This enzyme breaks down pyrophosphate (PPi) and employs the released energy to move H+ into the vacuolar lumen. This enzyme therefore works in parallel to the V-type ATPase and it remains a question why cells would require such an arrangement. The main purpose of the PPase may be to extract the considerable amount of energy that is available in the form of PPi, a by-product of cellular metabolism that is particularly ubiquitous in young developing tissue. On the basis of sequence homology, plant PPases are divided into type I or type II. The strong dependence of type I PPase activity and reversal potential on cytoplasmic K+ has led to the suggestion that type I PPases pump K+ ions at the same time as H+ (Davies et al., 1994) although this concept is still debated. Type II PPases show no requirement for cytoplasmic K+ . PPases consist of a single catalytic subunit with 13–16 TMD and a MW of around 80 kDa. They may function as homodimers in vivo (Maeshima, 2000). They are generally encoded by small gene families and PPase regulation has been studied in several plants and conditions to gain better insights into the role of this enzyme. For example, PPase expression is induced by conditions such as anoxia, and overexpression of PPase has led to plants showing increased salt and drought tolerance (Gaxiola et al., 2002). In physiological conditions, the free energy release of PPi hydrolysis is around 27 kJ mol−1 though MgPPi rather than PPi itself is the actual substrate. It is generally assumed that the PPi hydrolysis to H+ pumping ratio is one and this stoichiometry could therefore generate a PMF of around 300 mV.
5.3.2
Primary pumps involved in metal transport
Plants need to acquire many metals that play structural roles, are important cofactors to many enzymes, and participate in cellular signalling. Often such metals are required only in small quantities, but their low abundance in the environment makes the presence of high-affinity transport mechanisms a necessity. On the other hand, many conditions, such as polluted soils, may present a danger of metal toxicity and plants therefore also need adequate metal efflux mechanisms.
5.3.2.1
P-type Ca2+ pumps
Extracellular Ca2+ concentrations usually exceed 1 mM. In contrast, cytoplasmic free Ca2+ levels need to remain extremely low to prevent precipitation of Ca2+ phosphates. Cytoplasmic Ca2+ is therefore typically kept in the nanomolar range. The extremely low level of cytoplasmic Ca2+ may have led to the adaptation of this divalent ion as an important signalling intermediate. Indeed, a plethora of internal and external stimuli is known to evoke Ca2+ signals in plants, stimuli such as touch, pathogen attack or drought stress. During Ca2+ signalling, cytoplasmic Ca2+
TRANSPORT ACROSS PLANT MEMBRANES
91
concentrations may temporarily rise to around 1 μM. Both the maintenance of low cytoplasmic Ca2+ and a rapid restoration of resting levels after a signalling event require rigorous systems to remove cytoplasmic Ca2+ and deposit it in the apoplast or in intracellular stores (see also Chapter 7) such as the vacuole and the ER. One of the main components to maintain Ca2+ homeostasis is the P-type Ca2+ ATPase. These primary Ca2+ pumps are predominantly found at the plasma membrane and also at the ER, mitochondrial and plastidic membranes. As with other primary pumps, Ca2+ pumps have low turnover rates, but their affinity is extremely high with nanomolar K m values. The general catalytic mechanism of Ca2+ pumps is similar to that described for the P-type H+ ATPase, including a phosphorylated intermediate. There are two main classes (Axelsen and Palmgren, 2001), type IIA and IIB, of plant Ca2+ pumps, both functioning as a single polypeptide with an approximate MW of ∼110 kDa. In contrast to type IIA, type IIB pumps contain a calmodulin binding domain in the N-terminal region which is involved in a Ca2+ based feedback mechanism: When cytoplasmic Ca2+ levels increase, Ca2+ -activated calmodulin binds to the Ca2+ pump and stimulates its activity.
5.3.2.2
Heavy metal ATPases
This group of enzymes catalyses a diverse set of functions in the homeostasis of essential heavy metals such as Cu2+ , Zn2+ , Mn2+ , Fe2+ , Ni2+ and Co2+ (Hussain et al., 2004; Williams and Mills, 2005). Heavy metal ATPases (HMAs) are members of the P-type ATPase superfamily and are also named CPx-ATPases due to a signature domain consisting of a cysteine-proline-x motif, where x is a cysteine, a histidine or a serine. The CPx motif resides in the sixth TMD and is thought to play a role in binding of the transported metal. A good example where CPxATPases are known to mediate essential metal transport processes is the delivery of Cu2+ to the chloroplast where it is needed in the lumen for the copper-containing redox protein plastocyanin. In the chloroplast stroma, copper is a cofactor for the chloroplastic superoxide dismutase (SOD) enzyme, which is crucial for scavenging photosynthesis-generated superoxide radicals. At the chloroplast, two Cu2+ ATPases (PAA1 and PAA2) have been identified (Shikanai et al., 2003; Abdel-Ghaney et al., 2005). On the basis of GFP reporter studies, it was deduced that PAA1 is expressed in the chloroplast envelope whereas PAA2 is most likely targeted to the thylakoid membrane (see also Section 7.2.4.3). Through loss-of-function mutants, it was found that both PAA1 and PAA2 are necessary to deliver plastocyanin Cu2+ to the thylakoid lumen for photosynthetic activity, whereas only PAA1 is required to ensure adequate SOD activity in the stroma. Despite its physiological relevance, Cu2+ and other heavy metals can also be extremely toxic to plants even at micromolar concentrations (see also Chapter 12). After uptake from the soil solution such metals are readily chelated by metal-binding chaperones to avoid toxicity and detoxification also entails vacuolar sequestration and extrusion into the apoplast, functions that are often mediated by heavy metal ATPases.
92
5.3.3
PLANT SOLUTE TRANSPORT
ABC transporters
The last class of primary transporters that will be discussed is made up of the ATP binding cassette (ABC) transporters (Sanchez-Fernandez et al., 2001; Martinoia et al., 2002). ABC transporters are encoded by large gene families (∼150 genes in arabidopsis) and fulfil an amazing number of transport functions. In mammals, many ABC transporters are involved in the efflux of xenobiotics including medicinal drugs and are therefore responsible for the ‘multi drug resistance’ phenomenon. In plants, only a few ABC transporters have been characterised but it is clear that these proteins function in the detoxification of xenobiotics such as herbicides and heavy metals, the transport of hormones, and the movement of an exceedingly large range of metabolites. ABC transporters use MgATP as their energy source but the ATP can be replaced by GTP. Like P-type ATPases, ABC transporters are readily inhibited by vanadate, pointing to phosphorylation as an important step during the catalytic cycle. Structurally, they generally consist of two copies of a transmembrane domain (TMD) and an ATP binding domain (ABD). The latter couples ATP hydrolysis to transport of the substrate through the TMD. In fully functioning ABC transporters, the arrangement can either be TMD-ABD-TMD-ABD or ABD-TMD-ABD-TMD. The ABD contains a conserved region with characteristic ‘Walker motifs’ (GXXXXGKT, where X is any residue) and ABC transporter signature motif. As in animals, one of the main functions of plant ABC transporters is the removal of toxic compounds from the cytoplasm. This typically involves vacuolar sequestration of the hazardous compound after conjugation with derivatives such as glutathione, glycosyl or acetyl groups. A large group of ABC transporters from the multi-drug-resistance like protein (MRP) subfamily moves glutathionylated (GS) substances from the cytosol to the vacuolar lumen. For example, the arabidopsis MRP1 ABC transporter was shown to be capable of transporting conjugates of the herbicide metolachlor. The same transporter also illustrates one of the big conundrums regarding ABC transporters, the seemingly contradictory properties of high affinity and low specificity for substrates. For example, AtMRP1 was also shown to transport dinitrophenyl-GS and anthocyanin-GS with high affinity. As is the case for their animal counterparts (e.g. the cystic fibrosis transmembrane conductance regulator) plant ABC transporters may also be involved in the regulation of ion transport (e.g. Leonhardt et al., 1999).
5.4
Secondary active transport
In many cases, metabolites and nutrients have to be moved from lower to higher (electro)chemical potentials and therefore require active transport. In contrast to ATP-driven pumps that typically have high affinities and low turnover rates, active transport through carrier-type mechanisms achieves larger transport rates. Energisation of such mechanisms is realised through coupling of substrate movement to that of other ions that move down their electrochemical potential. In animal cells, primary transport in the form of the K+ -Na+ ATPase establishes a transmembrane
TRANSPORT ACROSS PLANT MEMBRANES
93
Na+ gradient and hence secondary transport is generally Na+ coupled. Plants, however, use H+ ATPases to generate a PMF and consequently secondary transport in plants is mostly H+ coupled. Notwithstanding this general concept, exceptions to this rule have been found (see Section 5.4.4). Proton-coupled active transport can consist of two mechanisms: antiport or symport. The former indicates a counterflow of substrate(s) and H+ , whereas in the latter case substrate(s) and H+ move in the same direction across the membrane. The list of both antiport and symport systems observed and anticipated in plants is long and so only some of the main examples are discussed below.
5.4.1
Potassium uptake
+
K is an essential macronutrient for plants and crucial in many metabolic reactions because of its role in enzyme activation. Protein synthesis, photosynthesis and cytoplasmic H+ homeostasis all require high cytoplasmic K+ concentrations. Furthermore, K+ plays a key role in turgor generation. As is the case for many nutrients, K+ uptake into plant roots has low- and high-affinity components with the latter being induced when plants become K+ starved. Electrophysiological studies have shown that, at relatively high external concentrations, passive transport of K+ through ion channels occurs. However, when external concentrations of K+ drop to low (micromolar) levels, its uptake needs to proceed through an active mechanism. This becomes clear by examining the equilibrium condition for K+ distribution across the membrane which is described by:
K+ out E m = 60 log + . K in
(5.9)
A membrane potential of –180 mV, a realistic value, can theoretically drive a 1000-fold accumulation of K+ and this could proceed through ion channels. But with [K+ ] in typically being in the region of 100 mM, such passive uptake can no longer proceed whenever the external [K+ ] drops below 100 μM. In those conditions, active transport is required. Electrophysiological experiments showed that this occurs via H+ coupling in a K+ :H+ symport mechanism (Maathuis and Sanders, 1994) that has a high affinity for K+ of around 20 μM. For a symport where K+ and H+ fluxes are coupled, the overall change in free energy is a function of E m , the respective ion gradients, and the coupling ratio n:
n H+ out K+ out . n H+ in K+ in
G = (n + 1)FE m + RT ln
(5.10)
At equilibrium G = 0 and Em =
RT (n + 1)F
n H+ out K+ out . n H+ in K+ in
ln
(5.11)
94
PLANT SOLUTE TRANSPORT
For the K+ :H+ symport, it was shown that this high-affinity uptake mechanism has an apparent stoichiometry of 1 K+ per H+ (Maathuis et al., 1997). This coupling ratio of unity ensures that theoretically the system can sustain an incredible 108 -fold accumulation of K+ if we assume an E m of –180 mV and a pH of 2. The molecular identity of high-affinity K+ transporters has been established to some extent. In Arabidopsis, members of the KUP/HAK gene family have been found to mediate high-affinity uptake in heterologous expression systems and expression of one isoform, AtHAK5, is induced by K+ starvation (Gierth et al., 2005). HAK5 is expressed in cortical and stelar root cells and a loss-of-function mutant in this gene showed absence of 86 Rb+ uptake, specifically in the high-affinity range. Thus, HAK5 is the most likely candidate for the plant H+ coupled high affinity K+ uptake system, but only a thorough electrophysiological examination of the energetics of the HAK5 encoded transporter will give a definitive answer.
5.4.2
Nitrate transport
In terms of mass, nitrogen is one of the largest constituents of plant biomass: it is acquired in large quantities from the soil. Generally, the forms of nitrogen taken up by plants are NH 4 + and NO 3 − of which NO 3 − is usually preferred. As is the case for K+ , the uptake of nitrate by roots is characterised by distinct high- and low-affinity kinetic phases (Forde, 2000; Orsel et al., 2002). Although external concentrations can be in the millimolar range, particularly in fertilised areas, the negative charge of NO 3 − means it has to overcome a considerable energetic barrier to enter the plant symplast and even in this low-affinity range, nitrate uptake has, therefore, to rely on active transport. It is widely assumed that such transport depends on coupling to H+ and Eq. 5.10 can be used to assess the possibility of various coupling ratios between H+ and NO 3 − . If unity is substituted for n then the overall charge becomes zero and NO 3 − uptake has to rely entirely on the pH as the driving force. With a pH of 2 and typical cytoplasmic NO 3 − concentration of 5 mM, this would restrict uptake to external concentration of 50 μM or more. However, uptake has been shown to proceed at lower external NO 3 − concentrations. In addition, measurements of root cell membrane potentials and voltage clamp experiments with nitrate-transporterexpressing oocytes have shown that the membrane depolarises in response to an increase in external NO 3 − . These observations strongly indicate that entry of nitrate into the symplast carries positive charge and it is therefore assumed that 2 H+ accompany each NO 3 − taken up through a NO 3 − :2H+ symporter (Meharg and Blatt, 1995). Two main classes of genes have been identified that are involved in various forms of NO 3 − uptake. These are the NRT1 and NRT2 gene families, both encoding proteins with a six plus six TMD structure. As a coarse generalisation, the NRT1 gene products are involved in low-affinity NO 3 − uptake, whereas NRT2 genes encode proteins that mediate both constitutive and inducible high-affinity uptake capacity (Orsel et al., 2002).
TRANSPORT ACROSS PLANT MEMBRANES
5.4.3
95
Sodium efflux
Apart from a number of C4 plants, sodium (Na+ ) is not required by plants as a nutrient. On the contrary, Na+ -based salinisation of many regions worldwide is an increasing problem for agriculture, especially since many crop plants are salt sensitive (cf Chapter 14). The negative membrane potential and high external concentrations of Na+ ions mean that the passive Na+ flux into the plant symplast is potentially large. Principally, there are only two ways to avoid death by salt: significantly limit Na+ influx and remove excess Na+ from the cytoplasm where its toxicity is most prevalent. Removal of Na+ is against its electrochemical gradient and therefore coupled to the H+ gradient. Both at the tonoplast and the plasmamembrane H+ :Na+ antiport mechanisms have been characterised that participate in exporting Na+ to the vacuole and apoplast, respectively. Most of this characterisation was carried out using membrane vesicles and measuring Na+ -induced changes in acridine or quinacrine fluorescence (see also Section 4.4.4). The latter compounds report changes in pH which should occur across the membrane when H+ -coupled Na+ fluxes occur. Such experiments revealed that plant H+ :Na+ antiporters are electroneutral, i.e. the coupling ratio is unity, and therefore completely rely on the presence of a pH. Thus, with a vacuolar pH of 5 and a cytoplasmic pH of 7.5, an electroneutral H+ :Na+ antiporter could drive an approximate 300 times accumulation of Na+ in the vacuolar lumen. H+ :Na+ antiporters from the NHX gene family (Yokoi et al., 2002) have been cloned from a range of plant species and the expression level of several tonoplast and plasma membrane H+ :Na+ antiporters greatly impacts on plant salt tolerance (Zhu, 2001; Vera-Estrella et al., 2005). Nevertheless, NHX isoforms may also be capable of transporting other monovalent cations. NHX antiporters typically contain 12 TMD (Colour plate 5.8), are around 120–130 kDa in weight and often have a conserved motif in the third TMD, where amiloride binds. Amiloride, a diuretic used to treat high blood pressure, inhibits many animal and plant H+ :Na+ antiporters. Recent work, however, challenges the generalised NHX topology and provides evidence that the C-terminus is actually in the luminal compartment where it plays an important role in calmodulin-dependent regulation of ion selectivity (Yamaguchi et al., 2005).
5.4.4
Non H + -coupled secondary transport
In contrast to animal cells, Na+ -coupled secondary transport is rare in plants. However, there is convincing evidence that it occurs for some substrates such as urea, NO 3 − and K+ . Na+ :urea symport has only been observed in charophytes and never in higher plants (Walker and Sanders, 1991), whereas Na+ -coupled NO 3 − uptake has been reported only for the halophytic seagrass Zostera marina. A more extensive survey was made into the occurrence of Na+ -coupled K+ uptake (Maathuis et al., 1996) and this showed that apart from charophytic genera, aquatic angiosperms such Egeria, Elodea and Vallisneria contain a second type of high-affinity K+ uptake
96
PLANT SOLUTE TRANSPORT
system that is driven through Na+ cotransport. The latter generally has a lower K m than the H+ coupled high affinity system. Since no molecular or mechanistic data are available for the Na+ -coupled system, it is hard to establish its exact physiological role in these aquatic species but it has been suggested to act as a K+ scavenging mechanism when ambient K+ levels are extremely low.
5.5
Concluding remarks
To maintain life, it is essential that cells have the capacity to optimise and control local environments. This will critically depend on two factors: the presence of barriers between compartments in the form of membranes and the mechanisms to control the influx and efflux of compounds. The latter function has developed to a high level of sophistication in higher plants to move solutes efficiently. Broadly speaking, primary, ATP-driven pumps set up H+ gradients to drive secondary transport. Primary pumps are also directly involved in Ca2+ and heavy metal transport. Secondary transport in plants is generally coupled to H+ gradients and participates in the uptake and movement of hundreds, if not thousands of different substrates. Finally, it is the ion channels that are almost exclusively responsible for passive transport. In spite of completing genome sequencing for a number of plant species, many of the transport mechanisms have yet to be identified at the gene level and an even greater number of transport proteins requires characterisation regarding substrate selectivity, kinetics and patterns of expression. Nevertheless, the current data suggest that all these mechanisms are under close control through many processes such as transcription, post-translational modification, membrane voltage modulation and ligand binding. It is this highly regulated nature and the specifically tailored functional aspects of solute transporters that endow plants with the capacity to thrive in almost any global environment.
References Abdel-Ghany, S.E., Muller-Moule, P., Niyogi, K.K., Pilon, M. and Shikanai, T. (2005) Two P-type ATPases are required for copper delivery in Arabidopsis thaliana chloroplasts. Plant Cell 17, 1233–1251. Axelsen, K.B. and Palmgren, M.G. (2001) Inventory of the superfamily of P-type ion pumps in Arabidopsis. Plant Physiology 126, 696–706. Balague, C., Lin, B.Q., Alcon, C., et al. (2003) HLM1, an essential signaling component in the hypersensitive response, is a member of the cyclic nucleotide-gated channel ion channel family. Plant Cell 15, 365–379. Berthomieu, P., Conejero, G., Nublat, A., et al. (2003) Functional analysis of AtHKT1 in Arabidopsis shows that Na+ recirculation by the phloem is crucial for salt tolerance. Embo Journal 22, 2004– 2014. Blumwald, E. and Poole, R.J. (1985) Na+ /H+ antiport in isolated tonoplast vesicles from storage tissue of Beta vulgaris. Plant Physiology 78, 163–167. Blumwald, E. and Poole, R.J. (1987) Salt tolerance in suspension-cultures of sugar-beet – induction of Na+ /H+ antiport activity at the tonoplast by growth in salt. Plant Physiology 83, 884–887.
TRANSPORT ACROSS PLANT MEMBRANES
97
Chrispeels, M.J., Morillon, R., Maurel, C., Gerbeau, P., Kjellbom, P. and Johansson, I. (2001) Aquaporins of plants: structure, function, regulation, and role in plant water relations. Aquaporins 51, 277–334. Davenport, R. (2002) Glutamate receptors in plants. Annals Botany 90, 549–557. Davies, J.M., Hunt, I. and Sanders, D. (1994) Vacuolar H+ -pumping ATPase variable transport coupling ratio controlled by pH. Proceeding National Academy Science USA 91, 8547–8551. Demidchik, V., Davenport, R.J. and Tester, M. (2002) Nonselective cation channels in plants. Annual Review Plant Biology 53, 67–107. Dietz, K.J., Tavakoli, N., Kluge, C., et al. (2001) Significance of the V-type ATPase for the adaptation to stressful growth conditions and its regulation on the molecular and biochemical level. Journal Experimental Botany 52, 1969–1980. Forde, B.G. (2000) Nitrate transporters in plants: structure, function and regulation. Biochimica Biophysica Acta-Biomembranes 1465, 219–235. Gaxiola, RA., Fink, G.R. and Hirschi, K.D. (2002) Genetic manipulation of vacuolar proton pumps and transporters. Plant Physiology 129, 967–973. Geelen, D., Lurin, C., Bouchez, D., et al. (2000) Disruption of putative anion channel gene AtCLC-a in Arabidopsis suggests a role in the regulation of nitrate content. Plant Journal 21, 259–267. Geisler, M., Axelsen, K.B., Harper, J.F. and Palmgren, M.G. (2000) Molecular aspects of higher plant P-type Ca2+ -ATPases. Biochimica Biophysica Acta-Biomembranes 1465, 52–78. Gierth, M., Maser, P. and Schroeder, J.I. (2005) The potassium transporter AtHAK5 functions in K+ deprivation- induced high-affinity K+ uptake and AKT1 K+ channel contribution to K+ uptake kinetics in Arabidopsis roots. Plant Physiology 137, 1105–1114. Gouaux, E. and MacKinnon, R. (2005) Principles of selective ion transport in channels and pumps. Science 310, 1461–1465. Hechenberger, M., Schwapach, B., Fischer, W.N., Frommer, W.B., Jentsch, T.J. and Steinmeyer, K. (1996) A family of putative chloride channels from Arabidopsis and functional complementation of a yeast strain with a CLC gene disruption. Journal Biochemistry 271, 33632–33638. Hille, B. (2001) Ion Channels of Excitable Membranes. Sinauer Associates, Inc. Sunderland, MA. Hussain, D., Haydon, M.J., Wang, Y., et al. (2004) P-type ATPase heavy metal transporters with roles in essential zinc homeostasis in Arabidopsis. Plant Cell 16, 1327–1339. Johanson, U., Karlsson, M., Johansson, I, et al. (2001) The complete set of genes encoding major intrinsic proteins in Arabidopsis provides a framework for a new nomenclature for major intrinsic proteins in plants. Plant Physiology 126, 1358–1369. Kluge, C., Lahr, J., Hanitzsch, M., Bolte, S., Golldack, D. and Dietz, K.J. (2003) New insight into the structure and regulation of the plant vacuolar H+ -ATPase. Journal Bioenergetics Biomembranes 35, 377–388. Laurie, S., Feeney, K.A., Maathuis, F.J.M., Heard, P.J., Brown, S.J. and Leigh, R.A. (2002) A role for HKT1 in sodium uptake by wheat roots. Plant Journal 32, 139–149. Leng, Q., Mercier, R.W., Hua, B.G., Fromm, H. and Berkowitz, G.A. (2002) Electrophysiological analysis of cloned cyclic nucleotide-gated ion channels. Plant Physiology, 128, 400–410. Leonhardt, N., Vavasseur, A. and Forestier, C. (1999) ATP binding cassette modulators control abscisic acid-regulated slow anion channels in guard cells. Plant Cell 11, 1141–1151. Ludewig, U., von Wiren, N. and Frommer, W.B. (2002) Uniport of NH4+ by the root hair plasma membrane ammonium transporter LeAMT1;1. Journal Biological Chemistry 277, 13548–13555. Luu, D.T. and Maurel, C. (2005) Aquaporins in a challenging environment: molecular gears for adjusting plant water status. Plant Cell Environment 28, 85–96. Maathuis, F.J.M. and Sanders, D. (1994) Mechanism of high affinity potassium uptake in roots of Arabidopsis thaliana. Proceeding National Academy Science USA 91, 9272–9276. Maathuis, F.J.M., Verlin, D., Smith, F.A., Sanders, D., Fernandez, J.A. and Walker, N.A. (1996) The physiological relevance of Na+ -coupled K+ -transport. Plant Physiology 112, 1609–1616. Maathuis, F.J.M., Sanders, D. and Gradmann, D. (1997) Kinetics of high affinity K+ uptake in plants, derived from K+ - induced changes in current-voltage relationships. Planta 203, 229–236. Maathuis, F.J.M. and Sanders, D. (2001) Sodium uptake in Arabidopsis thaliana roots is regulated by cyclic nucleotides. Plant Physiology 127, 1617–1625.
98
PLANT SOLUTE TRANSPORT
Maathuis, F.J.M., Filatov, V, Herzyk, P., et al. (2003) Transcriptome analysis of root transporters reveals participation of multiple gene families in the response to cation stress. Plant Journal 35, 675–692. Maeshima, M. (2000) Vacuolar H+ -pyrophosphatase. Biochimica Biophysica Acta-Biomembranes 1465, 37–51. Martinoia, E., Klein, M., Geisler, M., et al. (2002) Multifunctionality of plant ABC transporters – more than just detoxifiers. Planta 214, 345–355. M¨aser, P., Eckelman, B., Vaidyanathan, R., et al. (2002) Altered shoot/root Na+ distribution and bifurcating salt sensitivity in Arabidopsis by genetic disruption of the Na+ transporter AtHKTI1. FEBS letters 531, 157–161. Meharg, A.A. and Blatt, M.R. (1995) NO 3 - transport accross the plasma membrane of Arabidopsis thaliana root hairs: kinetic control by pH and membrane voltage. Journal Membrane Biology 145, 49–66. Orsel, M., Filleur, S., Fraisier, V. and Daniel-Vedele, F. (2002) Nitrate transport in plants: which gene and which control? Journal Experimental Botany 53, 825–833. Peiter, E., Maathuis, F.J.M., Mills, L.N., et al. (2005) The vacuolar Ca2+ -activated channel TPC1 regulates germination and stomatal movement. Nature 434, 404–408. Rubio, F., Gassmann, W. and Schroeder, J.I. (1995) Sodium-driven potassium uptake by the plant potassium transporter HKT1 and mutations conferring salt tolerance. Science, 270, 1660–1663. Sanchez-Fernandez, R., Davies, T.G.E., Coleman, J.O.D. and Rea, P.A. (2001) The Arabidopsis thaliana ABC protein superfamily, a complete inventory. Journal Biological Chemistry 276, 30231–30244. Shikanai, T., M¨uller-Moul´e, P., Munekage, Y., Niyogi, K.K. and Pilon M. (2003) PAA1, a P-Type ATPase of Arabidopsis, functions in copper transport in chloroplasts. Plant Cell 15, 1333–1346. Staal, M., Maathuis, F.J.M., Overbeek, J.H.M., Elzenga, J.T.M. and Prins, H.B.A. (1991) Na+ /H+ antiport activity in tonoplast vesicles from roots of the salt-tolerant Plantago maritima L. and the salt-sensitive Plantago media l. Physiologia Plantarum 82, 179–184. Sze, H., Li, X.H. and Palmgren, M.G. (1999) Energization of plant cell membranes by H+ -pumping ATPases: regulation and biosynthesis. Plant Cell 11, 677–689. Talke, I.N., Blaudez, D., Maathuis, F.J.M. and Sanders, D. (2003) CNGCs: prime targets of plant cyclic nucleotide signalling? Trends Plant Science 8, 286–293. Vera-Estrella, R., Barkla, B.J., Garcia-Ramirez, L. and Pantoja, O. (2005) Salt stress in Thellungiella halophila activates Na+ transport mechanisms required for salinity tolerance. Plant Physiology 139, 1507–1517. Very, A.A. and Sentenac, H. (2003) Molecular mechanisms and regulation of K+ transport in higher plants. Annual Review Plant Biology 54, 575–603. Walker, N.A. and Sanders, D. (1991) Sodium-coupled solute transport in charophyte algae: a general mechanism for transport energization in plant cells? Planta 185, 443–445. Wang Y., Schulten K. and Tajkhorshid E. (2005) What makes an aquaporin a glycerol channel: a comparative study of AqpZ and GlpF. Structure 13, 1107–1118. White, P.J. (2000) Calcium channels in higher plants. Biochimica Biophysica Acta-Biomembranes, 1465, 171–189. Williams, L.E. and Mills, R.F. (2005) P-1B-ATPases – an ancient family of transition metal pumps with diverse functions in plants. Trends Plant Sciences 10, 491–502. Yamaguchi, T., Aharon, G.S., Sottosanto, J.B. and Blumwald, E. (2005) Vacuolar Na+ /H+ antiporter cation selectivity is regulated by calmodulin from within the vacuole in a Ca2+ - and pH-dependent manner. Proceedings National Academy Sciences USA 102, 16107–16112. Yokoi, S., Quintero, F.J., Cubero, B., et al. (2002) Differential expression and function of Arabidopsis thaliana NHX Na+ /H+ antiporters in the salt stress response. Plant Journal 30, 529–539. Zhu, J.K. (2001) Plant salt tolerance. Trend Plant Sciences 6, 66–71.
6 Regulation of ion transporters Anna Amtmann and Michael R. Blatt 6.1
Introduction
Transport proteins have multiple and diverse functions in plant development and physiology. They mediate the transport of many solutes including inorganic nutrients, primary assimilates and secondary metabolites. They reside in various tissues and membranes where they facilitate the uptake or the release of solutes into/from cells and intracellular compartments. Transport proteins differ in affinity, transport rate and direction of transport (Chapter 5). Such functional diversity is required to ensure that nutrients and metabolites can be optimally used under any given condition. According to developmental stage, metabolic state, composition of the soil and environmental condition, the plant has to integrate uptake, allocation and redistribution of solutes to maximise their usage for growth and reproduction. Such adaptation requires flexible and robust mechanisms to regulate solute transport. Developmental, metabolic and environmental clues have to be recognised and translated into signals that are perceived by the targeted transporters and the resulting fluxes have to be adjusted at the whole-plant level. The regulation of ion transporters occurs at several levels (e.g. gene expression, mRNA degradation, protein turnover, protein activity and membrane trafficking), and involves both negative and positive feedback loops (e.g. inhibition of nitrate transporters by N assimilates and Ca2+ -induced Ca2+ release). Furthermore, membrane transporters are both integral components and targets of signalling pathways (e.g. cytoplasmic Ca2+ oscillations and gradients, auxin transport, abscisic acid [ABA] signalling and salt-overly-sensitive [SOS] pathway). Transcriptional and post-translational regulation of transporters has been the subject of active research for many years, and a huge amount of knowledge about the signals and regulatory mechanisms involved has been accumulated. In this chapter only the surface of this field can be scratched, by listing several examples for adaptive processes involving the regulation of transporters (Section 6.2) and molecular mechanisms underlying transcriptional and post-translational regulation of ion transporters (Section 6.3). In the last section, recent ideas on how ion transporters could be regulated by membrane trafficking are summarised.
6.2 6.2.1
Physiological situations requiring the regulation of ion transport Change of cell volume
The most elemental of situations requiring control of solute transport in plants relate to changes in cell volume. Plant cells utilise inorganic ions – notably K+ and to lesser
100
PLANT SOLUTE TRANSPORT
extents Cl− and organic anions – as the primary osmotically active solutes to maintain turgor and to drive irreversible cell expansion as well as reversible changes in cell volume. Clearly, a bias of inorganic ion uptake must be maintained to accommodate increases in cell volume during growth and, on a cell-by-cell basis, a coordinated balance of influx and efflux must be achieved once growth terminates (HoldawayClarke and Hepler, 2003; Very and Sentenac, 2003; Amtmann et al., 2004). A similar coordination of ion transport, albeit for solute loss, underpins reversible changes in cell volume that are characteristic of stomatal guard cells (Willmer and Fricker, 1996), pulvini and similar ‘motor’ cells in plants (Hill and Findlay, 1981). Major targets for transport control in all these cases include the dominant H+ -ATPases that energise the various cell membranes, as well as K+ and Cl− (anion) channels. While less is known that bears on transport control during irreversible growth, much detail of several regulatory pathways have come to light from a few cell models, especially stomatal guard cells, and some recent developments are briefly touched on here. The very large ion fluxes associated with stomatal movements offer a particularly useful handle for analysis of transport control in stomatal guard cells. Between open and closed states, guard cells of Vicia faba, for example, take up or release 2–4 pmol of KCl. On a cell volume basis, these changes correspond to 200–300 mOsm in solute content. Since mature guard cells lack plasmodesmata (Wille and Lucas, 1984), all of this solute flux must pass across the plasma membrane. Electrophysiological measurements under voltage clamp of the H+ -ATPase and dominant ion channel currents show that these are more than sufficient to account for solute uptake during stomatal opening and for K+ and Cl− loss during stomatal closure (Blatt, 1987; Lohse and Hedrich, 1992; Thiel and Wolf, 1997; Schroeder et al., 2001). Nonetheless, attention over the years has centred primarily on the effects of ABA in facilitating solute loss and stomatal closure under water stress, and especially its action in regulating K+ and Cl− channel activities at the plasma membrane. The voltage sensitivities of these ion channels contribute significantly to their regulation under free-running (that is, non-voltage-clamped) conditions (Gradmann et al., 1993; Blatt, 2000). Nonetheless, control of the Cl− channel current (I Cl ) and the two dominant K+ channels – identified with the inward-rectifying (I K,in ) and outward-rectifying (I K,out ) K+ currents and, in Arabidopsis thaliana, principally with the KAT1 and GORK gene products, respectively (Nakamura et al., 1995; Hosy et al., 2003) – is also tightly linked through voltage-independent pathways. Coordinated regulation of I Cl and I K,in is achieved in part through signalling pathways that lead to a rise in cytosolic-free [Ca2+ ] ([Ca2+ ] i ). The coupling of changes in [Ca2+ ] i to ABA is well established (Davies and Jones, 1991; McAinsh et al., 1997; Blatt, 2000; Webb et al., 2001). However, the mechanisms leading to a rise in [Ca2+ ] i and its downstream targets continue to yield new insights. It is clear now that ABA influences [Ca2+ ] i through at least two complementary processes. At the plasma membrane, ABA affects the voltage threshold for activation of Ca2+ channels mediating Ca2+ entry (Hamilton et al., 2000) and thereby affects the interaction between [Ca2+ ] i and voltage evident as oscillations in [Ca2+ ] i (Allen et al., 2000, 2001; Blatt, 2000), possibly through a NADPH-oxidase-dependent process (Kwak et al., 2003). Within the guard cell, ABA promotes Ca2+ release
REGULATION OF ION TRANSPORTERS
101
induced by Ca2+ entry across the plasma membrane via at least one well-defined mechanism that draws on nitric oxide stimulating cyclic GMP- and cyclic ADPribose-activated Ca2+ channels within one or more endomembranes (Neill et al., 2002; Garcia-Mata et al., 2003). Other internal, Ca2+ -associated pathways include inositol-1,4,5-trisphosphate release and [Ca2+ ] i elevation through the actions of phospholipase C (Blatt et al., 1990; Gilroy et al., 1990; Hunt et al., 2003), as well as the actions of inositol-hexakisphosphate (Lemtiri-Chlieh et al., 2000), sphingosine and other membrane lipid metabolites (Lee et al., 1996; Ng et al., 2001; Coursol et al., 2005). How these [Ca2+ ] i signals are translated to alterations in I K,in and I Cl activities is still uncertain. Plausibly, Ca2+ may couple to the channel proteins through a protein kinase cascade similar to that of SOS2/3 signalling pathway that regulates the SOS1 Na+ /H+ antiporter (see Section 6.2.3). Certainly, both the K+ and Cl− channel currents are sensitive to protein kinase and phosphatase antagonists (Luan et al., 1993; Thiel and Blatt, 1994; Grabov et al., 1997) and subject to modulation by the arabidopsis ABI1 (abscisic acid insensitive 1) 2C-type protein phosphatase (Armstrong et al., 1995; Pei et al., 1997). Protein phosphorylation also influences the efficacy of [Ca2+ ] i signalling and the responses of I K,in and I Cl mediated by nitric oxide (Sokolovski et al., 2005). Thus, it seems likely that (de)phosphorylation of a target closely associated with these channels contributes to Ca2+ signal transmission. While the Ca2+ signal predominates in many aspects of regulation for I K,in and I Cl , it is curiously absent in control of the outward-rectifying K+ channels in guard cells, including the GORK K+ channel of arabidopsis (Hosy et al., 2003) and its phloem homologue SKOR (Gaymard et al., 1998). Instead, current through these channels is strongly dependent on cytosolic pH (pH i ) and on extracellular [K+ ] ([K+ ] o ). Increasing pH i augments I K,out in a scalar fashion, consistent with a synergistic binding of two H+ (Grabov and Blatt, 1997) and the rise in pH i evoked by ABA (Irving et al., 1992; Blatt and Armstrong, 1993). Unlike the situation for Ca2+ , virtually nothing is known of the mechanism(s) behind this rise in pH i nor of its site of action, although its kinetics (and that of changes in I K,out ) are sufficiently slow (Blatt and Armstrong, 1993) to be accommodated by cation exchange and charge-balancing events during solute efflux from the vacuole (MacRobbie, 2000). The control of gating by [K+ ] o exhibited by I K,out is unique to plant K+ channels, but is not exclusive to guard cells. Indeed, for many plant Kv channels, the voltage dependence of gating is modulated by the availability of K+ outside (Blatt, 1991). Like the K+ channels of animal cells, these channels open on membrane depolarisation and facilitate K+ flux out of the cell; however, unlike their animal counterparts, the plant K+ channels do so only at membrane voltages positive of the K+ equilibrium potential. In other words, the voltage dependence of gating for these K+ channels in plants shifts with external [K+ ]. This ability to respond to the prevailing [K+ ] o makes good physiological ‘sense’; it guarantees that the channels open only when the driving force for net K+ flux is directed outward, and, in stomatal guard cells it ensures the K+ efflux needed to drive stomatal closure and control gas exchange, even when extracellular K+ varies over concentrations from 10 nM to 100 mM (Blatt and Gradmann, 1997).
102
PLANT SOLUTE TRANSPORT
Remarkably, the ability to sense [K+ ] o is integral to the K+ channel protein itself and, therefore, represents one of the very few examples in which the mechanism for ‘nutrient sensing’ is known. It also poses a number of intriguing questions that are fundamental to understanding the mechanisms of voltage-dependent K+ channel gating both in plants and in animals. From a molecular standpoint, gating by K+ implies that cation binding with the channel protein must stabilise or otherwise favour a closed conformation of the channel pore. Recent studies demonstrated that SKOR gating is consistent with K+ binding to a site with pore-like characteristics and identified a critical role for a site deep within the S6 transmembrane helix of the channel protein, adjacent the so-called pore helix, that is essential for this K+ sensitivity (Johansson et al., 2006). The finding is significant, because analogous interactions between the pore helix and the S6 helix are known to affect gating of mammalian K+ channels (cf. Alagem et al., 2003; Seebohm et al., 2003, 2006). In animals, these interactions are favoured by cation occupation of the pore. Thus, in effect, cations in the pore of many animal K+ channels can be thought to ‘push out’ on the pore and, indirectly, to stabilise the open state, a mechanism originally identified by Clay Armstrong who proposed the ‘foot-in-the-door’ hypothesis (see Hille, 2001). However, in SKOR (Johansson et al., 2006) these interactions have precisely the opposite effect: they stabilise the closed state of the K+ channel. Furthermore, site mutations in this domain of SKOR also affect the sensitivity to [K+ ]. How K+ binding translates to these seemingly counterintuitive effects on gating is not clear at present, but will undoubtedly yield insights into K+ channel gating in general. For the moment, however, it can be concluded that there is a tight interplay in the mechanics of gating by K+ and voltage that accounts for the response of the channel to the K+ environment.
6.2.2
Nutrient acquisition
Many transporters are involved in the acquisition, storage and redistribution of macronutrients such as potassium, calcium, magnesium, nitrogen, sulphur and phosphorus as well as micronutrients including iron, zinc, manganese and copper (see also Chapter 12). Depending on supply and demand of mineral nutrients, plants have to adjust the expression levels and activity of individual transporters to achieve a combination of specific transport properties (affinity, substrate specificity and mode of energisation) that is best suited to fulfil the plant’s needs under the given conditions. Regulation of nutrient transport occurs primarily at the level of gene expression; for example, many genes encoding transporters involved in nutrient acquisition are induced or repressed when the concentration of their substrate in the soil changes. In the following description of these events the emphasis is on transporters of macronutrients. Nutrient availability also affects the transcription of transporters such as proton pumps or anion channels that are not directly involved with the transport of the respective minerals but have a function in increasing the driving force for nutrient uptake or in providing charge balance (Maathuis et al., 2003). Several genes encoding high-affinity sulphate (e.g. AtSULTR1;2 and AtSULRT1;2; Buchner et al., 2004) and phosphate transporters (e.g. AtPT1 and
REGULATION OF ION TRANSPORTERS
103
AtPT2; Al-ghazi et al., 2003) are induced by removal of S or P from the growth medium. By contrast, high-affinity nitrate transporters of the NRT2 family are induced by adding small amounts of nitrate (10–50 μM) to an N-depleted medium (Krapp et al., 1998; Filleur and Daniel-Vedele, 1999). Expression of ammonium transporters from arabidopsis (e.g. AtAMT1;1 and AtAMT1;3) increases during N deficiency, whereas expression of AMT isoforms from tomato and rice are induced by N supply (Loque and von Wiren, 2004). The observation that some transporters are induced by a change from high to low supply and others by a change from nil to low supply might indicate a fundamental difference in the underlying regulatory mechanisms but is of little relevance for the physiological effect. Both responses result in high expression levels of these transporters under conditions that require their function as high-affinity systems in nutrient uptake. Fine-tuning of this response seems to occur through differential regulation of apparently functionally redundant isoforms. For example, SULTR1;1 and SULRT1;2 are both high-affinity transporters induced by low S (10 μM), and they co-localise in the plasma membrane of root cells (Takahashi et al., 2000; Shibagaki et al., 2002); nevertheless, they differ with respect to sulphur sensitivity of their transcriptional response. SULTR1;1 shows sharp induction between 100 and 1500 μM external S, whereas SULTR1;2 transcripts increase more gradually with a maximum at 10 μM external S (Maruyama-Nakashita et al., 2004c). Similarly, members of the arabidopsis AMT family of ammonium transporters vary in their sensitivity to N supply; transfer of plants to N-free medium induces the expression of AtAMT1;1 and AtAMT1;3 within 3 days, whereas induction of AtAMT1;2 and AtAMT2;4 requires more extended periods of N deficiency (Gazzarrini et al., 1999; Sohlenkampa et al., 2000). Such differential regulation of transporter isoforms allows a flexible usage of these systems in a wide range of conditions. Astonishingly few transporters involved in K+ transport respond to varying + K supply with transcriptional changes (Maathuis et al., 2003). Out of some 50 genes expected to have K+ transport capacity (M¨aser et al., 2001), only HAK5, a putative high-affinity K+ uptake system, is consistently reported to be induced by K+ starvation (Armengaud et al., 2004; Shin and Schachtman, 2004; Gierth et al., 2005). Genes for K+ channels although responding to several environmental and hormonal stimuli (Pilot et al., 2003a) do not respond to changes in external K+ supply. It appears that the relative contribution of individual K+ channels to K+ nutrition is primarily determined at the protein level; thus, channel gating is modulated by external K+ as well as several second messengers potentially involved in nutrient signalling (e.g. Ca2+ , pH, nitric oxide, reactive oxygen species [ROS] and cyclic nucleotides [CNs]; see Section 6.2.1 and Amtmann et al., 2006). Nutrient transport is adjusted to not only the availability of nutrients in the environment but also the nutritional status and requirement of the plant (Figure 6.1). Negative feedback control of nutrient uptake by primary assimilates has been shown in several cases. For example, a rise of plant amino acid levels decreases NRT2.1 expression. In tobacco, glutamine is the most effective inhibitor (Krapp et al., 1998), whereas in arabidopsis and barley, arginine or asparagine is more effective than glutamine (Zhuo et al., 1999; Vidmar et al., 2000). Glutamine seems to be involved in
104
PLANT SOLUTE TRANSPORT Light
S
/+N
P
-K Ckn /CRE1 OAS
Suc, Fru, Glu Sac3
Gln, Asn, Arg
GSH, Cys
ROS
PHR SULTR
PT P1BS
H2PO4
AMT
NRT
HAK
SURE
SO42
NH4+
NO3
K+
Figure 6.1 Transcriptional regulation of nutrient transport. The figure gives an overview of stimuli and pathways regulating genes encoding phosphate transporters (PT), sulphate transporters (SULTR), ammonium transporters (AMT), nitrate transporters (NRT) and potassium transporters (HAK). Transporters are induced by depletion (or resupply) of the respective nutrient in the soil. Feedback control is exerted by primary assimilates such as glutathione (GSH) or amino acids (Cys, cysteine; Gln, glutamine; Asn, asparagine; Arg, arginine). Nutrient uptake is linked to the photosynthetic rate (light) through soluble sugars (Suc, sucrose; Fru, fructose; Glu, glucose). In some cases there is evidence for the involvement of specific hormones (Ckn, cytokinin), kinases (CRE1, Sac3) and transcription factors (PHR) in signaling. P1BS and SURE are P- and S-responsive promoter cis-elements respectively. For further details and references, see text.
feedback control of ammonium uptake. Thus, induction of the arabidopsis ammonium transporter AMT1;1 in response to resupply of ammonium nitrate occurs only if assimilation of ammonium into glutamine is inhibited by methionine sulphoximine (Rawat et al., 1999). By contrast, in rice, glutamine induces the expression of OsAMT1;1 (Sonoda et al., 2003) indicating that glutamine can act as a metabolic trigger for both down- and up-regulation of AMT genes depending on the individual gene and the plant species (Loque and von Wiren, 2004). Metabolites of the sulphur assimilation pathway inhibit transcription of sulphate transporters. Barley HvST1 and arabidopsis SULTR1;1 and SULTR2;1 are repressed by glutathione (GSH) and cysteine (Smith et al., 1997; Maruyama-Nakashita et al., 2004c). O-acetyl-l-serine (OAS, a precursor of cysteine synthesis) overrides the negative feedback regulation of HvST1 by GSH (Smith et al., 1997). Both arabidopsis genes are also up-regulated by OAS albeit again with different sensitivity (Maruyama-Nakashita et al., 2004c). Nutrient uptake is tightly linked to carbon status, and thus indirectly controlled by environmental factors that affect the photosynthetic rate. Lejay et al. (2003) tested a number of root ion transporters for regulation by photosynthesis. The arabidopsis genes Amt1.1, Amt1.2 and Amt1.3, NRT1.1, NRT1.2, Hst1, AtPT2 and AtKUP2 were all repressed during the dark. This repression was prevented by continuous light,
REGULATION OF ION TRANSPORTERS
105
or by adding sucrose at the beginning of the dark period, indicating a link to the photosynthetic rate rather than the circadian rhythm. The authors found a strong correlation between the stimulating effects of light and sucrose and measured an increase in the concentration of soluble sugars in the root tissue during the light period. Neither 2-oxoglutarate nor malate mimicked the effect of sucrose, making it unlikely that carboxylic acids, providers of carbon skeletons for amino acids, play a role in gene repression during the dark period (Lejay et al., 2003). Lejay and colleagues went on to investigate a possible role of known sugar signalling pathways in the regulation of these transporters. Sucrose does not appear to be the signal per se, since glucose and fructose, which do not increase during sucrose application, had even stronger effects than sucrose. Hexokinase (HXK) has been postulated to be a major sugar sensor and a regulatory element for cross talk between C and N metabolism (Sheen et al., 1999; Moore et al., 2003). Experiments using sugar analogues 2-deoxyglucose (2-DOG) and mannose, which are phosphorylated by HXK but are poorly metabolised by glycolysis, and 3-O-methylglucose (3-OMG), which is not metabolised at all, suggested that HXK is required and sufficient for the creation of the sugar signal independent of its function in sugar metabolism (Jang and Sheen, 1994). However, this is not the case for light regulation of nutrient transporters (Lejay et al., 2004). Expression of NRT2.1 was repressed rather than stimulated by 2-DOG or mannose, and glucosamine, an inhibitor of HXK, decreased mRNA levels of NRT2.1 even when sucrose was applied. Thus HXK activity is required but not sufficient to maintain expression of NRT2.1. Similar results were obtained for NRT1.1, AMT1.2 and AMT1.3 and HST1 (Lejay et al., 2003). Further support for the notion that HXK signalling is not involved in light regulation of NRT2.1 came from the observation that the transcriptional response of NRT2.1 to sucrose and light is maintained in sugar-sensing mutants rsr1, sun6 and gin1-1 as well as hxk mutants with altered signalling. Induction of NRT2.1 by sucrose and glucose is, however, abolished in HXK antisense plants, suggesting that catalytic activity and carbon metabolism downstream of HKX are required for sugar regulation of this transporter. A link to carbon metabolism was also established for sulphate uptake. Adenylyl sulphate (APS) reductase, a key enzyme in sulphate reduction, is stimulated by sucrose and glucose (Kopriva et al., 1999), and addition of glucose and sucrose enhances the response of SULTR1;1 and SULTR1;2 to S starvation (MaruyamaNakashita et al., 2004c). Conversely, depletion of carbon sources from the media attenuates induction of SULTR1;1 and SULTR1;2 in sulphur-free medium. Uptake of individual nutrients is linked not only to carbon status but also to the availability of other nutrients. Thus expression of SULTR1;1 and SULTR1;2 responds to nitrogen supply. Low N attenuates the induction of these genes in response to S starvation. The connection point between N and S may lie in the OAS pool (Maruyama-Nakashita et al., 2004c). OAS production involves an amino transfer reaction and therefore depends on the supply of N. P supply does not influence the expression of sulphate transporters but affects the expression of AMT1.1, NRT1.1 and NRT 2.1 (Wang et al., 2002; Wu et al., 2003). It has been suggested that this involves a systemic sucrose signal (Liu et al., 2005). NRT2.1 is also down-regulated during K+ starvation (Armengaud et al., 2004). In this case, amino acids rather than
106
PLANT SOLUTE TRANSPORT
sugars appear to act as signals, and it has therefore been hypothesised that enzymes involved in N assimilation are directly dependent on K+ (Amtmann et al., 2006).
6.2.3
Stress responses
The regulation of transport processes is essential for plant responses to biotic and abiotic stresses. For example, acclimation to drought stress (see Chapter 15) requires enhanced water and solute uptake, acclimation to salt stress requires export and compartmentalisation of toxic Na+ , and defence against pathogens requires the release of secondary metabolites and nutrient recycling from necrotic tissue. One example of transporter regulation during drought stress is the regulation of stomatal K+ channels during drought stress, which occurs downstream of an ABA signal as described above (Section 6.2.1). Transporters not only are signalling targets of environmental stress but are also required for signalling as they carry signalling molecules and their precursors between different cellular compartments, cells and tissues. One of the best described responses to environmental stress involving membrane transporters both as stress receptors and as stress targets is acclimation to salt stress. Salt stress caused by high levels of external NaCl leads to the build-up of toxic Na+ in the cytoplasm unless counteracted by the action of transport systems that either export Na+ back into the apoplast or compartmentalise it in the vacuoles (see Chapter 14 for discussion of the effects of salinity on plants). The first measurable signal of salt stress is a rise in cytoplasmic Ca2+ (Knight et al., 1997). It is likely that this rise in cytoplasmic Ca2+ is caused by Ca2+ influx through depolarisation-activated Ca2+ channels (Miedema et al., 2001), as Na+ entry into the cell through nonselective channels (Demidchik et al., 2002) and other Na+ -permeable transporters (e.g. HKT1; Rus et al., 2001) will cause membrane depolarisation (Amtmann et al., 2004; Volkov and Amtmann, 2006). Crucial components of the signalling pathway leading from the initial Ca2+ signal to the enhanced activity of Na+ export systems were discovered by Zhu and colleagues. In a root-bending assay of an ethane methyl sulphonate mutated population of A. thaliana, they identified three loci that resulted in sos mutants (Wu et al., 1996). Positional cloning identified SOS1 as a plasmamembrane-located Na+ /H+ antiporter (Shi et al., 2000), SOS2 as a serine/threonine protein kinase (Liu et al., 2000) and SOS3 as a calcineurin B-like protein containing three EF hands for Ca2+ binding (Liu and Zhu, 1998). Unlike calcineurin, SOS3 is not a phosphatase but interacts physically with the SOS2 kinase (Halfter et al., 2000). Mutations of the SOS2 protein in the N-terminal kinase activation loop and the Cterminal autoinhibitory domain result in constitutive kinase activity. The mutated kinase increases plasma membrane Na+ /H+ exchange activity in wild type as well as in sos2 and sos3 knockout mutants but not in sos1 mutants, indicating that SOS2 acts upstream of SOS1 but downstream of SOS3. Previously it had been shown that interaction between SOS3 and SOS2 leads to activation of substrate phosphorylation by SOS2. It is therefore likely that the SOS2/SOS3 complex activates SOS1 by phosphorylation. However, activation of Na+ /H+ antiport activity by constitutively active SOS2 was weaker in sos2/sos3 mutants than in wild type and differed between sos2 and sos3 genotypes, indicating that other elements required for a fully responsive SOS3 protein are missing or altered in these mutants (Qiu et al., 2002).
REGULATION OF ION TRANSPORTERS
107
Recent experiments showed that the Na+ /H+ antiporter NHX1 and the Ca2+ /H+ antiporter CAX1, both residing in the tonoplast, are also targets of SOS2 regulation, but in this case SOS2 acts independently of SOS3 (Cheng et al., 2004; Qiu et al., 2004). Both SOS3 and SOS2 are members of large gene families, and it is likely that many other transporters are regulated by SOS2/SOS3 proteins. This raises the exciting possibility that the SOS signalling pathway represents a general link between ionic conditions in the environment and cellular ion homeostasis. Each SOS regulatory module would be formed by a specific signalling triplet consisting of a Ca2+ -binding protein, a kinase and a target transporter (Cheng et al., 2004). Microarray experiments have revealed that transcriptional regulation of ion transporters occurs in response to many abiotic stresses (see for example Fowler and Thomashow, 2002; Kreps et al., 2002; Seki et al., 2002; Maathuis et al., 2003), but in most cases the role of the individual transporters and their regulation in stress acclimation remains to be characterised. Interesting clues can be obtained by comparing expression patterns of ion transporters between plants that are either sensitive or tolerant to the applied stress. For example, AKT1-type K+ channels required for K+ uptake into root cells are differentially regulated by salt stress in salt-tolerant and salt-sensitive rice varieties (Golldack et al., 2003). The vacuolar V-type H+ -ATPase is essential for creating the driving force for Na+ accumulation in the vacuole during salt stress and is generally up-regulated during salt stress. However, the individual subunits targeted by salt-induced transcriptional regulation appear to differ between halophytes and glycophytes (Dietz et al., 2001; Kluge et al., 2003; Maathuis et al., 2003). Furthermore, comparative microarray analysis of A. thaliana and its salt-tolerant relative Thellungiella halophila (Taji et al., 2004; Volkov et al., 2004; Gong et al., 2005; Wong et al., 2006) indicated that many genes that are up-regulated by salt stress in arabidopsis exhibit already high expression levels in T. halophila under low-salt condition. Hence, T. halophila is evolutionarily ‘prepared’ for high salinity and does therefore no longer require salt-induced regulation of certain ion transporters. Examples include the Na+ /H+ antiporter SOS1, the H+ -ATPase AHA2 (Taji et al., 2004) and a large number of V-type ATPase subunits (B. Wang and A. Amtmann, unpublished results). Differential responsiveness of ion transporters in sensitive and resistant species to abiotic and biotic stress should remind us that observation of regulatory processes under stress conditions does not necessarily indicate successful stress acclimation but in many cases merely shows that the plant has pressed a ‘panic button’. Separation of acclimation from panic responses, especially with respect to the underlying signalling pathways, is a major challenge for the interpretation of experimental data in this field.
6.3
Molecular mechanism of regulation
The previous sections have introduced several physiological situations that involve the regulation of ion transporters. A number of molecular signals including intracellular Ca2+ and pH, protein kinases, transcription factors, metabolites and hormones have been confirmed to be essential components of the signalling pathways linking
108
PLANT SOLUTE TRANSPORT
environmental stimuli to changes in ion transport. However, in only a few cases is it known how these pathways finally modulate the targeted transporter. In the remainder of the chapter some of the molecular mechanisms that can regulate transporter genes or proteins are described.
6.3.1
Transcriptional regulation
The molecular components of the transcriptional regulation of nutrient transporters remain largely unknown. Regulation of AtSULTR1;1 requires an upstream region of −3031 bp, whereas −1944 bp are sufficient for tissue-specific expression (Maruyama-Nakashita et al., 2004a). Analysis of deletion mutants in this region identified a 16-bp sulphur-responsive element (SURE) between −2777 and −2762 that is sufficient and necessary for enhanced expression of SULTR1;1 in response to S starvation (Maruyama-Nakashita et al., 2005). Regulation of phosphate transporters and other P-responsive genes is under the control of transcription factors of the MYB-CC family such as PHR1 and PHR2, which act as positive regulators (Rubio et al., 2001; Todd et al., 2004). AtPHR1 recognises a GnATATnC motif, the P1BS element. However, although the P1BS motif is present in the promoters of many P-regulated genes, it is not overrepresented in P-regulated genes (Hammond et al., 2003). This could indicate that P regulates PHR genes at the post-transcriptional level, or that other promoter elements are required for P-specific responses (Amtmann et al., 2006). Very little is known to date about upstream events linking changes in soil nutrient availability to gene expression of the respective transporters, but there is evidence that they involve the production of ROS, cytoplasmic Ca2+ signalling and kinase/phosphatase activity. Production of ROS occurs in roots in response to K+ starvation and is necessary for the induction of downstream responses including derepression of HAK5 (Shin and Schachtman, 2004; Shin et al., 2005; Figure 6.1). A rise in intracellular Ca2+ signal, although not yet reported, is likely to occur in response to K+ starvation, since microarrays revealed K+ -induced changes in transcript levels of several Ca2+ -binding proteins and Ca2+ -dependent kinases (CDPKs) (Armengaud et al., 2004). Transcriptional regulation of sulphate transporters appears to involve phosphorylation/dephosphorylation events; in arabidopsis, application of phosphatase blockers (okadaic acid, calyculin A) abolishes green fluorescent protein (GFP) expression under the control of the SULTR1;1 promoter in response to sulphur starvation (Marayuma-Nakashita et al., 2004a), and in Chlamydomonas the regulation of sulphate uptake requires an Snf1-like Ser/Thr kinase (Sac3, Figure 6.1; Davies et al., 1999). Phosphorylation is also likely to be involved in the regulation of nitrate transporters, since all NRT2 sequences contain a target sequence for protein kinase C in their C-terminus (Forde, 2000). Finally, several studies indicate a role for plant hormones in mediating nutritional signals. K+ starvation enhances the expression of enzymes involved in the biosynthesis of ethylene (Shin and Schachtman, 2004) and jasmonic acid (Armengaud et al., 2004), and levels of the two hormones increase in roots and shoots of K+ -starved plants respectively. However, the exact position of ethylene and jasmonate signals within the K+ starvation response remains
REGULATION OF ION TRANSPORTERS
109
to be elucidated. Expression of sulphate (SULTR1;1 and SULTR1;2) and phosphate (PT1) transporters is repressed by cytokinin, and application of cytokinin suppresses their induction by S or P starvation (Martin et al., 2000; Maruyama-Nakashita et al., 2004c; Hou et al., 2005; Figure 6.1). Signal transduction of cytokinin-dependent responses involves the histidine kinase CRE1 (Inoue et al., 2001), and cre1 mutants no longer show a response of SULTR1;1 and SULTR1;2 to cytokinin (MaruyamaNakashita et al., 2004b). The observation that both cytokinin and CRE1 transcript levels decrease during P starvation (Franco-Zorrilla et al., 2005) further supports the notion of CRE1/cytokinin signalling pathway in nutrient responses.
6.3.2
Post-translational regulation
In addition to changes in gene expression, many transporter proteins respond to environmental clues with changes in protein activity. Post-translational modifications of ion transporters are manifold; the best characterised examples involve: r intramolecular interaction, for example with autoinhibitory domains, r protein–protein interaction, for example with 14-3-3 proteins, calmodulins or protein kinasesand phosphatases, r ligand binding, for example ion channel gating by CNs and r interaction between different subunits in heteromeric proteins, for examples betweenα-subunits of Shaker K+ channels. Each of these mechanisms will be described here in some detail using H+ andCa+ -ATPases, Na+ /H+ antiporters and ion channels as examples (Figure6.2).
6.3.2.1
Autoinhibition
Plant P-type H+ -ATPases (cf. Section 5.3.1.1) have a fundamental role in creating the electrochemical proton gradient that drives nutrient uptake and in controlling currents through voltage-dependent ion channels via the membrane potential. Plant Ca2+ -ATPases in plasma- and endomembranes have a similarly important role in the maintenance and recovery of a low base level of cytoplasmic free Ca2+ , which is a prerequisite for Ca2+ signalling. The capacity to regulate both types of pumps is therefore essential. Both proton and Ca2+ pumps contain well-defined regulatory domains in their C- and N-termini respectively (Geisler et al., 2000a; Morsomme and Boutry, 2000; Baekgaard et al., 2005; Figure 6.2). These serve as autoinhibitors and are thought to interact both intramolecularly with other parts of the pump and extramolecularly with activating proteins including 14-3-3 proteins, protein kinases and calmodulin. The first evidence for autoinhibition of plant H+ -ATPases was provided by biochemical experiments; trypsin treatment of plant plasma membranes resulted in H+ -ATPase activation concomitant with cleavage of a C-terminal fragment (DeWitt and Sussman, 1995). Furthermore, complementation of a yeast strain lacking endogenous proton pump activity with plant H+ -ATPases was unsuccessful unless the C-terminus was removed (Palmgren and Christensen, 1993; Baunsgaard et al., 1996;
110
PLANT SOLUTE TRANSPORT
AHA/PMA2
ACA2/8 out
out/ER
cyt
cyt
Ca2+
P Ca2+
KCO1
CNGC1/2
NHX1
out
out
vac
cyt
cyt
cyt
P Ca2+
AID
14-3-3 BD
14-3-3
FC
CaMBD
CaM
CNBD
SelRD
Figure 6.2 Post-translational regulation of ion transport. Regulatory domains for autoinhibition, protein–protein interaction and ligand binding are shown for plasma membrane H+ -ATPases (AHA2 and PMA2), plasma membrane and endomembrane Ca2+ -ATPases (ACA2, ACA8), a putative vacuolar K+ channel (KCO1), putative cyclic-nucleotide-gated channels (CNGC1, CNGC2) and the vacuolar Na+ /H+ antiporter NHX1. Transporter topology is shown as suggested by Baekgaard et al. (2005; H+ - and Ca2+ pumps), V´ery and Sentenac (2002; KCO and CNGC) and Yamaguchi et al. (2003; NHX1). Transmembrane spanning domains as well as extracellular (out) vacuolar (vac), ER-luminal (ER) and cytoplasmic (cyt) loops of the proteins are shown as grey lines. Regulatory domains are represented by different symbols as shown at the bottom (AID, autoinhibitory domain; 14-3-3BD, 143-3 protein-binding domain; FC, fusicoccin; CaM, calmodulin; CaMBD, calmodulin-binding domain; CNBD, cyclic nucleotide binding domain; SelRD, regulatory domain controlling ion selectivity). Individual residues involved in AID interaction are shown as small black boxes. For details and references, see text.
Morsomme et al., 1998). Both trypsin treatment and genetic deletion increased maximal pump activity (V max ), decreased the apparent K m and shifted the pH optimum to more alkaline pH values (Palmgren et al., 1990, 1991; Palmgren and Christensen, 1993). Progressive deletion of AHA2 from the C-terminus showed that deletion of 38 residues is sufficient to decreases the K m and achieve the observed shift in pH optimum but deletion of at least 51 and 61 residues is required to achieve full activity and functional expression, respectively, in yeast (Regenberg et al., 1995). A number of point mutations were identified in the tobacco H+ -ATPase PMA2 that release autoinhibition and improve the coupling ratio between proton pumping and ATP hydrolysis (Morsomme et al., 1996, 1998). The majority of these mutations
REGULATION OF ION TRANSPORTERS
111
are concentrated in two close regions within the first half of the C-terminal domain. Systematic alanine scanning of the C-terminus of arabidopsis AHA2 also revealed two regions (RI and RII) as being important for autoinhibition (Axelsen et al., 1999). These are located between Lys-863 and Leu-885 and between Ser-904 and Leu-919. Plant Ca2+ pumps of the IIB type also contain an autoinhibitory R domain but, in contrast to their animal counterparts, it is located in the N-terminus. It appears, however, that the position of this domain in the C- or N-terminus is not important for its autoinhibitory function. Thus, relocation of the C-terminal R domain in the animal PMCA4b to the N-terminus had only minor effects on autoinhibition (Adamo and Grimaldi, 1998). As in the case of H+ -ATPases, yeast complementation with plant Ca2+ -ATPases is possible only if the autoinhibitory domain, in this case the N-terminus, is deleted (Harper et al., 1998; Chung et al., 2000; Geisler et al., 2000b; Bonza et al., 2004; Schiott et al., 2004; Schiott and Palmgren, 2005). Point mutations in certain single amino acid residues in the N-terminus have the same effect (Curran et al., 2000; Baekgaard et al., 2006). In the arabidopsis Ca2+ pump ACA8 these include Trp-43 and Phe-60, which are directly involved in autoinhibition. In addition to the R domains, several amino acid residues outside the autoinhibitory domains are important for autoinhibition of H+ and Ca2+ pumps (Morsomme et al., 1996, 1998; Curran et al., 2000; Figure 6.2) suggesting that they could be important for intramolecular recognition of the autoinhibitory domain. In the arabidopsis endoplasmic reticulum Ca2+ pump ACA2, several residues that connect the catalytic domain with transmembrane domains are required for autoinhibition, and it was suggested that they interact with the N-terminal autoinhibitory domain (Curran et al., 2000). In the tobacco plasma membrane proton pump PMA2, point mutations leading to enzyme activation were discovered in the N-terminus, the first and fourth transmembrane spanning domain and the small and large cytoplasmic loops (Morsomme et al., 1996, 1998). Partial tryptic digestion showed that these mutations cause a conformational change that makes the C-terminus more accessible to trypsin. Hence, it is likely that these modifications result in the displacement of the C-terminal inhibitory domain from its interaction site.
6.3.2.2
14-3-3 proteins
14-3-3 proteins are highly conserved proteins that regulate activities of a wide range of targets via direct protein–protein interaction. Short amino acid motifs of the target protein containing phosphoserine or phosphothreonine are bound in a conserved amphipathic region present in each monomer of a dimeric 14-3-3 protein. Hence, interactions depend on the phosphorylation status of the targets and can involve either one or two targets at the same time (Roberts, 2003). In their function as activators/ repressors, adapters or chaperones, they are involved in many cellular processes (Aitken, 1996). In plants, targets of 14-3-3 proteins include metabolic enzymes (e.g. nitrate reductase; Huber et al., 2002; Comparot et al., 2003), transcription factors (e.g. VP1; Schultz et al., 1998), protein kinases (e.g. CDPK2; Camoni et al., 1998) and ion transporters. Regulation of plant P-type H+ -ATPases by 14-3-3 proteins was discovered through the action of fusicoccin (FC), a fungal toxin that provokes
112
PLANT SOLUTE TRANSPORT
membrane hyperpolarisation and acidification of the external medium (De Boer, 1997). The features of H+ -ATPases isolated from FC-treated plants resembled those obtained by C-terminal deletion (i.e. higher V max , lower K m , shift of pH optimum; see above) suggesting that FC modifies the C-terminus (Johansson et al., 1993; Lanfermeijer and Prins, 1994). The mystery of how FC regulates plant proton pumps was solved when a 30-kDa protein doublet present in FC receptor preparations was cloned and identified as a member of the 14-3-3 protein family (Korthout and de Boer, 1994; Marra et al., 1994; Oecking et al., 1994). It was subsequently shown that 14-3-3 proteins bind directly to the C-terminus of plant H+ -ATPases and that this interaction is stabilised by FC (Jahn et al., 1997; Oecking et al., 1997; Fullone et al., 1998). 14-3-3 protein binding involves a unique region in the extreme end of the Cterminus which partly overlaps with the RII autoinhibitory domain (Jelich-Ottmann et al., 2001; Fuglsang et al., 2003; Figure 6.2). The 14-3-3 binding domain includes two phosphorylation sites. Phosphorylation of the penultimate threonine residue of the C-terminus (Thr-947 in AHA2) is required to stabilise 14-3-3 binding (Fuglsang et al., 1999; Svennelid et al., 1999; Maudoux et al., 2000). Phosphorylation of this site in vivo has been shown in guard cells in response to blue light (Kinoshita and Shimazaki, 1999) and in root cells in response to aluminium stress (Shen et al., 2005) but the kinase that phosphorylates the threonine residue has not yet been identified. Instead, a kinase of the CDPK family, PKS5, has been shown to phosphorylate a serine residue situated further upstream in the C-terminus (Baekgaard et al., 2005). Phosphorylation of this site (Ser-931 in AHA2) leads to a decrease of 14-3-3 binding and thus to decreased activity of the pump. In vitro experiments identified several phosphatases including alkaline phosphatase (Fuglsang et al., 1999) and PP2A (Camoni et al., 2000) that can disrupt the interaction between the H+ pump and 14-3-3 proteins. First evidence that 14-3-3 proteins regulate ion channels came from the observation that overexpression of a 14-3-3 gene in tobacco (Saalbach et al., 1997) and addition of recombinant 14-3-3 proteins to tomato suspension cells (Booij et al., 1999) resulted in increased K+ outward currents. Since then, modulation of several types of vacuolar (‘slow vacuolar’, SV, and ‘fast vacuolar’ FV) and plasma membrane (inward and outward) K+ currents by 14-3-3 proteins has been reported (De Boer, 2001; Van den Wijngaard et al., 2005), including both activation and inhibition, but linking physiological results with molecular studies proved difficult sometimes. Using surface spectron resonance Sinnige et al. (2005) showed that the barley two-pore K+ channel HvKCO1 (Figure 6.2), previously characterised as a component of the SV current (Schonknecht et al., 2002), interacts with three barley 14-3-3 proteins out of which 14-3-3A exhibits the highest affinity. By contrast, SV currents were strongly reduced by 14-3-3B and 14-3-3C but not by 14-3-3A. A possible explanation for this discrepancy was provided by the recent discovery that SV currents are in fact created by TPC1, another two-pore channel that differs from KCO1 in its topology (Peiter et al., 2005). Hence, the identification of KCO1mediated currents in planta and the role of KCO1 regulation by 14-3-3 proteins for cellular K+ transport now require reassessment. A physiological role of 14-3-3 regulation of K+ channels in seed germination was recently identified in barley
REGULATION OF ION TRANSPORTERS
113
(Van den Wijngaard et al., 2005). The second phase of germination, apparent in embryonic root (radicle) emergence, is inhibited by ABA and stimulated by FC. ABA and FC also have opposite effects on K+ uptake into the radicle (inhibited by ABA and stimulated by FC) and on K+ currents across the plasma membrane of protoplasts derived from the radicle (ABA reduces K in , FC reduces I K,out and stimulates I K,in ). Inclusion of recombinant barley 14-3-3B protein in the patch pipette solution (cytoplasmic side) resulted in a fast decline of K out currents by 60%, whereas K in currents were increased. Furthermore, addition of a 14-3-3 binding protein to the pipette solution completely abolished I K,in , showing that residual K in in the previous experiment was due to bound endogenous 14-3-3 proteins. Hence, 14-3-3 proteins emerge as an important component of the signalling pathway leading to ABA-dependent seed dormancy. One possible scenario is that ABA activates protein serine/threonine phosphatases ABI1 and ABI2 (Armstrong et al., 1995) causing channel dephosphorylation, dissociation of 14-3-3 protein and channel inhibition (Van den Wijngaard et al., 2005).
6.3.2.3
Calmodulin
Calmodulins (CaM) are small Ca2+ -binding proteins that can translate intracellular Ca2+ signals into a variety of cellular responses. In accordance with this function, CaM are involved in plant responses to a large number of environmental stimuli (Snedden and Fromm, 2001). Targets of this large gene family (approximately 28 members in arabidopsis) include membrane transporters such as Ca2+ -ATPases, putative cyclic-nucleotide-gated channels (CNGCs) and the vacuolar Na+ /H+ antiporter NHX1 (Figure 6.2). The interaction between Ca2+ , CaM and Ca2+ -ATPases creates a negative feedback loop that instigates removal of Ca2+ from the cytoplasm as soon as cytoplasmic Ca2+ levels start to rise. The relative kinetics of the influx of Ca2+ and its removal by Ca2+ pumps shape the Ca2+ signal and determine its frequency, thereby endowing it with some specificity (Plieth, 1999). Upon binding of Ca2+ , calmodulin interacts with the N-terminus of IIB-type Ca2+ pumps and leads to increased activity. There is no consensus CaM-binding site but they are usually 15–30 amino acids long and form an α-helix containing two bulky hydrophobic residues that function as anchors for CaM (Crivici and Ikura, 1995; Yap et al., 2000). N-terminal CaM domains (CaMBD) have been identified in the cauliflower Ca2+ -ATPase BCA1 (Malmstr¨om et al., 1997) and in the arabidopsis Ca2+ pumps ACA8 and ACA9 (Bonza et al., 2000; Schiott et al., 2004). The CaMBD in ACA8 spans from Arg-43 to Lys-68, and the conserved Trp-47 and Phe-60 act as hydrophobic anchor residues for CaM binding. Eleven more hydrophobic or basic residues were found to be important for the stability of the CaM complex. CaM binding interferes with autoinhibition involving six residues in the CaMBD. These include the hydrophobic anchor residues Trp-43 and Phe-60 suggesting that these residues have a dual function in CaM recognition and in autoinhibition (Baekgaard et al., 2006). Kinases are again important modulators of this regulation, but in contrast to their stabilising effect on the C-terminal 14-3-3 protein complex in proton pumps, they seem to inhibit CaM action in Ca2+ pumps. For example, it was shown that the endomembrane Ca2+ -ATPase ACA2 is
114
PLANT SOLUTE TRANSPORT
phosphorylated by a CDPK at Ser-45 near the CaMBD, and that this phosphorylation results in inhibition of CaM stimulation and of basal activity (Hwang et al., 2000). The physiological meaning of this apparently inverse effect of intracellular Ca2+ on ACA2 via CaM and CDPK remains to be studied. Recent results from the Blumwald laboratory (Yamaguchi et al., 2003, 2005) have raised the surprising possibility that CaM acts not only in the cytoplasm but also within the vacuole. In a yeast two-hybrid screen they identified a CaM-like protein AtCaM15 as an interacting partner of the vacuolar H+ /Na+ antiporter AtNHX1. AtCaM15 belongs to a subgroup of CaM that somewhat diverges from the more conserved members of the same gene family (CaM1–CaM7). A further yeast two-hybrid assay confirmed CaM15 as a CaM, since it interacted with a known CaM-binding protein, and also showed that CaM15 interacts with the C-terminus of NHX1. Progressive deletions of the C-terminus mapped the binding site to a region between Val-498 and Gly-518. This region indeed has the potential to form a positively charged amphiphilic helix, a characteristic feature of CaM-binding domains. The interaction between AtNHX1 and CaM15 appears to be specific, as it did not occur with a CaM from petunia (CaM81), which has a conserved CaM motif and is identical to AtCaM7. Pull-down assays with FLAG-tagged AtCaM15 showed that CaM binding to NHX1 is dependent on the presence of Ca2+ (1–10 mM) and increases with acidic pH (pH 7.5–5.5). In a previous study, the same group had shown that the C-terminus of AtNHX is located in the vacuolar lumen (Yamaguchi et al., 2003). Treating isolated vacuoles of yeast expressing FLAG-tagged AtCaM15 with proteinase K in either the presence or the absence of Triton X-100 showed that CaM15 could be detected only in the absence of the detergent, indicating that it is indeed localised inside the vacuolar lumen. The vacuolar localisation was subsequently confirmed in planta by fluorescence microscopical analysis of leaf protoplasts transformed with EGFP (enhanced green fluorescent protein) tagged AtCaM15. What could be the physiological relevance of CaM signalling in the vacuole? Regulation of NHX1 by CaM seems to target the cation selectivity of this transporter. The study of Yamaguchi et al. (2005) showed that CaM binding to NHX1 decreased the V max of Na+ /H+ antiport, whereas the V max for K+ /H+ antiport activity was unchanged. Previously they had shown that C-terminal deletion of NHX1 increased the Na+ /K+ selectivity of the antiport activity (Yamaguchi et al., 2003). On the basis of the pH dependence of CaM binding to NHX1 the authors suggest that transient increase in vacuolar pH would release CaM from the C-terminus, thereby increasing the potential of the vacuole to accumulate Na+ .
6.3.2.4
Cyclic nucleotides
Cyclic nucleotides, cGMP and cAMP, are used for signal transduction by many organisms including animals, fungi, bacteria and algae, and there is increasing evidence that higher plants use cGMP as a secondary messenger, for example in chloroplast development and pathogen defence (Bowler et al., 1994; Durner et al., 1998). A rise of intracellular cGMP levels has recently been measured after the onset of drought and salt stress (Donaldson et al., 2004). Treatment of arabidopsis plants with membrane-permeable cGMP leads to transcriptional changes in a large
REGULATION OF ION TRANSPORTERS
115
number of genes (Maathuis, 2006) among which transporters for monovalent cations are overrepresented. Potential direct targets of CN signalling include protein kinases as well ion channels (Maathuis, 2006). CNGCs in animals are non-selective among cations and play an important role in the transduction of visual and olfactory signals (Finn et al., 1996). Animal CNGCs are activated by binding of cAMP or cGMP to a regulatory domain in the C-terminus. Additional control of gating is exerted by a CaM-binding site in the N-terminus, which interacts with the CN-binding site thereby lowering the affinity for cAMP and cGMP (Finn et al., 1996). In plants, Shaker K+ channels are regulated by CNs (Hoshi, 1995; Gaymard et al., 1996) but the response is slow and requires high concentrations of CN. Hence, although these channels contain putative CN-binding sites, a direct interaction is unlikely. CN action could be exerted through phosphorylation events; for example in V. faba mesophyll cells, a PKA-like kinase is involved in the stimulatory effect of cAMP on the K+ outward rectifier (Li et al., 1994). The first plant CNGC was identified from barley on the basis of its binding to CaM (Schuurink et al., 1998). Homologues of HvCBT1 and animal CNGCs have since been identified in many plant genomes including tobacco, rice and arabidopsis (Talke et al., 2003, for review). Unfortunately, plant CNGCs have proven to be rather recalcitrant to expression in heterologous systems, probably due to the requirement for heterotetramerisation between and αand β-subunits (Maathuis, 2004). Nevertheless, heterologous expression has been achieved for AtCNGC1, CNGC2, AtCNGC4 and NtCBP4. Interestingly, these experiments revealed some features of plant CNGCs that are unknown in their animal counterparts, such as K+ selectivity and inward rectification, but they agreed in the observation that currents were activated by CN (Leng et al., 1999, 2002; Balague et al., 2003; Hua et al., 2003). By contrast, patch-clamp experiments showed that the activity of voltage-independent non-selective cation channels in arabidopsis root cells decreases after addition of CN (Maathuis and Sanders, 2001). This channel type is likely to play a role in Na+ uptake during salt stress (Demidchik et al., 2002), and indeed arabidopsis seedlings treated with membrane-permeable CNs display increased salt tolerance (Maathuis and Sanders, 2001). In plant CNGCs, the CN-binding domain is not located in the N-terminus as in their animal homologues but is located in the C-terminus where it overlaps with the CaM-binding domain (Arazi et al., 2000; Figure 6.2). Yeast two-hybrid assays confirmed the interaction between the C-termini of CNGC isoforms (CNGC1 and CNGC2) and members of the CaM gene family (CaM2 and CaM4; K¨ohler et al., 1999). It has therefore been suggested that the binding of CaM at the C-terminus might interfere with CN binding. Indeed, whole-cell patch-clamp experiments showed that inclusion of AtCaM4 in the (cytoplasmic) pipette solution resulted in a decrease of cAMP-induced currents in HEK cells expressing AtCNGC2 (Hua et al., 2003). Interaction of CaM and CN binding within the C-terminus implies a different regulatory mechanism from the one operating in animal CNGCs. Interestingly, differential regulation of individual CNGC isoforms is indicated by the observation that CaM-binding domains of AtCNGC1 and AtCNGC2 differ in their affinity for CaM (K¨ohler and Neuhaus, 2000). However, there is still a long way to go to understand the physiological role and regulation of CNGCs in plants.
116
6.3.2.5
PLANT SOLUTE TRANSPORT
Heteromerisation
Membrane transporters are often assembled from several subunits. Heterooligomerisation involving several transporter isoforms is likely to be a common phenomenon but has only recently attracted interest from the point of view of transporter regulation. For example, observation of interaction between members of the AMT1 family of ammonium transporters has led to the hypothesis that this type of protein–protein interaction is a regulatory element in AMT protein activity (Ludewig et al., 2003; Loque and von Wiren, 2004). To date, the best studied example of heteromeric protein assemblies is K+ channels of the Shaker family. Functional channels consist of four α-subunits, which in the simplest case form homotetramers. Biochemical experiments and yeast two-hybrid studies have revealed that in plant Shaker channels, interaction between the individual subunits involves three domains in the C-terminal region. The KHA domain at the extreme C-terminus cross-interacts with a region just downstream of the hydrophobic core, and the putative CN-binding domain interacts with itself (Daram et al., 1997). There is now increasing evidence that functional channels can also be provided by heterotetramers. First indication for heterotetramerisation came from the observation that co-expression of different plant Shaker channel transcripts in Xenopus laevis oocytes produced currents that could not be explained by simply adding homotetrameric channel currents (Dreyer et al., 1997). Out of the five subgroups of Shaker channel genes (Pilot et al., 2003b), interaction occurs, at least in heterologous systems, between group I (AKT1-type) and group II (KAT1-type) α-subunits, group III (AKT2-type) and group IV (AtKC-type) α-subunits, and also between group II and group III α-subunits (Dreyer et al., 1997; Baizabal-Aguirre et al., 1999; Pilot et al., 2001, 2003a; Zimmermann et al., 2001). The question remains whether heterotetramerisation occurs in planta and whether it provides a physiological means for regulating K+ currents. The analysis of expression patterns shows that many tissues express at least two types of Shaker channels, thus providing the opportunity for the formation of hybrid channels (Cherel, 2004). However, in most cases it has not been analysed whether co-expressed channels are co-localised in the same membrane. KAT1 and KAT2 are both expressed in guard cells and have been shown to interact in heterologous expression systems (Pilot et al., 2001). Evidence for KAT1/KAT2 interaction in guard cells comes from the apparently contradictive observations that overexpression of mutant KAT1 channels affects stomatal function (Kwak et al., 2001) while KAT1 knockout does not (Szyroki et al., 2001). More intriguingly even, AtKC1, which does not form functional homotetrameric channels in heterologous expression systems, might act as a modulator of AKT1 currents. Both genes are expressed in root hairs but knockout of AKT1 alone is sufficient to completely abolish K+ inward current, thus confirming AtKC as a ‘silent channel’. Nevertheless, disruption of the AtKC gene results in qualitative changes of the inward current affecting its Ca2+ and pH sensitivity (Reintanz et al., 2002) suggesting that AKT1/AtKC heteromers underlie physiological K+ currents in root hairs. Hence, heterotetramerisation of a limited number of co-expressed but differentially regulated subunits has the potential to produce a plethora of K+ currents within a single cell. This would explain why in many cases electrophysiological studies on
REGULATION OF ION TRANSPORTERS
117
plant cells reveal a complex picture of ion currents that is difficult to reconcile with individual channel features detected in heterologous expression systems.
6.4
Traffic of ion transporters
Eukaryotic cells maintain a traffic of vesicles to shuttle membrane material, proteins and soluble cargo between endomembrane compartments, the plasma membrane and the extracellular space. Vesicles are formed by budding and constriction at the formative membrane surface, and their delivery is achieved by fusion and intercalation with the lipid bilayer of the target membrane (Pratelli et al., 2004; Surpin and Raikhel, 2004). These processes sustain membrane turnover and must be integrated so as to populate cellular membranes with ion transport proteins and to maintain their homeostatic functions. For vesicle fusion in plants there is a growing body of kinetic and physiological data that bear on traffic control, at least at the plasma membrane where physical access is possible in vivo. Exocytotic and endocytotic events at the plasma membrane have been identified with stepwise changes in capacitance that accompany the increase or decrease of membrane surface area during vesicle membrane fusion and removal, respectively (Thiel and Battey, 1998; Blatt and Thiel, 2003). These changes in capacitance are consistent in size with the predicted vesicle dimensions derived from ultrastructural studies (Picton and Steer, 1983; Phillips et al., 1988) and from imaging studies using fluorescent styryl dyes to label internalised membrane (Meckel et al., 2004). Factors shown to affect vesicle traffic in plants include cytosol-free Ca2+ concentration ([Ca2+ ] i ), guanosine nucleotides (Homann and Tester, 1997; Carroll et al., 1998) and osmotic changes (Kubitscheck et al., 2000). Furthermore, evidence for [Ca2+ ] i -dependent and -independent exocytotic pathways underscores the complexity of secretory processing that must occur in parallel within individual cells (Homann and Tester, 1997; Sutter et al., 2000). By contrast, information remains scarce that can speak to the partitioning and delivery of specific ion transport proteins to various target membranes within the cell. Vesicle traffic has been implicated in the spatial distribution of the auxin efflux carrier Pin1 and its sensitivity to the ARF-GEF inhibitor Brefeldin A (Steinmann et al., 1999; Geldner et al., 2001) that disrupts Golgi structure and trafficking (Nebenfuhr et al., 2002). Traffic of the H+ -ATPase has also been suggested to underpin auxinstimulated H+ extrusion and parallel increases in H+ -ATPase protein that take place over a similar timescale (≥10 min) at the plasma membrane (Hager et al., 1991) and may be related to a concerted targeting to the plasma membrane (Lefebvre et al., 2004). Nonetheless, only recently has attention turned to vesicle traffic as a means to controlling specific transporter activities, notably of selected ion channel proteins, and its relation to changes in cell volume. Two developments have placed membrane traffic squarely at the forefront of research in this respect. First, the biophysical studies of Homann, Thiel and colleagues have demonstrated that a reversible exchange of K+ channels occurs in guard cell protoplasts during osmotically driven changes in cell volume. Homann (1998) and Kubitscheck et al. (2000) measured events of exo- and endocytosis from the plasma membrane of
118
PLANT SOLUTE TRANSPORT
V. faba guard cell protoplasts using capacitance recording and styryl dyes. Capacitance recording makes use of sine wave retardation to determine membrane surface area (Penner and Neher, 1989; Angleson and Betz, 1997; Thiel and Battey, 1998) and yields kinetic information about vesicle traffic when combined with fluorescence analysis of styryl dye distributions. These studies demonstrated a close coordination of vesicle traffic with cell volume. Their subsequent work indicated that traffic of the predominant K+ channels was integrated with these surface area changes in such a way that the balance of channel population densities was maintained (Homann and Thiel, 2002). Finally, Hurst et al. (2004) and Meckel et al. (2004) have confirmed that these cells respond to osmotic challenge with endo- and exocytosis of a GFP-tagged KAT1 K+ channel after transient biolistic transfections. Details of the molecular mechanism(s) are lacking, but the kinetics are sufficiently rapid to suggest that ion channel traffic – and changes in channel population – may contribute significantly to channel control in some circumstances. Nonetheless, questions still hang over the interpretation of these findings. Most importantly, osmotically driven vesicle traffic appears non-selective, and therefore differs fundamentally from the physiological regulation of channel activities, for example during stomatal movements (Hurst et al., 2004). Thus, how widespread are these phenomena and the circumstances in which they prevail will need to be established. The second development has come from the identification of two SNARE (soluble NSF [N-ethylmaleimide-sensitive factor] attachment protein receptors) proteins associated with ABA signalling in tobacco and arabidopsis (Leyman et al., 1999). SNAREs comprise a group of membrane proteins that are conserved among all eukaryotes and form the core of the molecular machinery for vesicle trafficking and membrane fusion (Jahn et al., 2003; Pratelli et al., 2004; Sutter et al., 2006). Complementary SNAREs, identified by their core residues (either arginine [R] or glutamine [Q]), are localised to different target membrane compartments and vesicles, and interact to form a tetrameric bundle of coiled helices that draws the membrane surfaces together and facilitates fusion. Furthermore, specificity in SNARE interactions is thought to contribute to membrane recognition and vesicle targeting (Mcnew et al., 2000; Paumet et al., 2004). In this context, it is not surprising that the plasma membrane Q-SNAREs NtSyp121 (NtSyr1) from tobacco and AtSyp121 (AtSyr1) from arabidopsis are associated with ABA. Drought stress and ABA have profound effects on cellular compartmentation and cell volume, especially in guard cells. What is noteworthy, however, is that both SNAREs were initially identified in a screen for ABA receptors using an expression-cloning strategy. Furthermore, NtSyp121 was cleaved by the Clostridium botulinum neurotoxin BotN/C and, intriguingly, both neurotoxin treatments and the (so-called Sp2) domain corresponding to the soluble cleavage fragment blocked K+ and Cl− channel responses to ABA when loaded directly into guard cells (Leyman et al., 1999). How might a membrane-trafficking protein account for such rapid and selective channel control? One clue has come from studies of KAT1 K+ channel trafficking and localisation in the presence of the Sp2 domain of these SNAREs. Sutter et al. (2006) made use of a dual labelling strategy, incorporating a pair of haemagglutinin epitopes in the extracellular loops of KAT1 and a photo-activatable GFP (Patterson
REGULATION OF ION TRANSPORTERS
119
and Lippincott-Schwartz, 2002) at its C-terminus. They found that KAT1 traffic to the plasma membrane was suppressed by the Sp2 domain of both NtSyp121 and AtSyp121 such that roughly 60% of the label was retained within the endoplasmic reticulum, and the effect was selective for the K+ channel when compared with the PMA2 H+ -ATPase. By contrast, both the K+ channel and H+ -ATPase were retained within the endoplasmic reticulum when co-expressed with a dominantnegative Rab1b mutant that blocks export to the Golgi apparatus (Batoko et al., 2000). This shift to endosomal accumulation implies a backlog of synthesised protein that built up on restricting traffic to the plasma membrane, and offers some underpinning for possible actions of ABA. Notably, the specificity of Sp2 for the K+ channel demonstrates that the trafficking pathways of these two integral membrane proteins diverge at a stage post-Golgi, late in transit to the plasma membrane. Thus both the K+ channel and H+ -ATPase must pass through the Golgi apparatus en route to the plasma membrane. At present, however, the basis for KAT1 selectivity is unresolved. For example, it is possible that the KAT1 K+ channel uniquely partitions in association with NtSyp121 and its homologue AtSyp121 late in transfer to the plasma membrane. This interpretation accords with recent evidence in nerve and epithelia for differential trafficking and distributions, even among subsets of Kv- and Kir-type K+ channels (Ma et al., 2001, 2002; Leung et al., 2003; Rivera et al., 2003; Misonou and Trimmer, 2004). Alternatively, however, the traffic and targeting observed for KAT1 may be a general characteristic of a larger subset of plasma membrane proteins, and the H+ -ATPase represents an exception to this rule. Lefebvre et al. (2004) reported that traffic of the PMA2 H+ -ATPases depends on presumably novel and, as yet, unidentified domains within the large, cytosolic loop internal to the protein sequences. Furthermore, Geelen et al. (2002) noted previously that transit of secretory cargo (a soluble GFP) is also sensitive to the Sp2 domain of NtSyp121, suggesting that the K+ channel follows the same export pathway. These are only two illustrative explanations, and they serve to highlight our substantial ignorance about traffic at the plasma membrane. Still more intriguing, localisation of the K+ channel at the plasma membrane was strongly altered in the presence of the Sp2 domains. Whereas KAT1 normally was found anchored within surface microdomains of approximately 0.5-μm diameter, when co-expressed with the Sp2 domains distribution of the K+ channel was diffuse and the protein was mobile within the plane of the membrane. Again, these observations do not speak directly to channel control by ABA, but they do bear witness to actions of the Sp2 domains that are separate from their effects on traffic to the plasma membrane and, thus, indicate roles for the SNAREs that may link directly to cell signalling. SNAREs are important to the targeting and, hence, to different spatial distributions of K+ channels in nerve cells (Ma et al., 2001, 2002; Leung et al., 2003; Rivera et al., 2003; Misonou and Trimmer, 2004) and between apical and basal membranes of epithelia (Bravo-Zehnder et al., 2000; Le Maout et al., 2001). However, an impact on channel mobility and anchoring within the plasma membrane is entirely new. It is not difficult to imagine that anchoring and clustering of the channel proteins are important for effective signal transmission and control of channel activities. Disrupting this organisation and, presumably, local associations
120
PLANT SOLUTE TRANSPORT
with upstream signalling elements could have profound effects on this coupling and thereby interfere with ABA signalling, as was first observed for these SNAREs (Leyman et al., 1999). Clearly, it will be of special interest now to identify the immediate protein partners of these SNAREs and to explore the functional impact of channel clustering at the plant plasma membrane.
6.5
Conclusions and outlook
Ion transporters mediate transmembrane solute fluxes that underlie cell volume changes, nutrient acquisition and maintenance of water potential. Regulation of ion transporters is essential to adjust these parameters to plant development and to environmental challenges such as nutrient shortage, drought and salinity. The combination of electrophysiological, biochemical, molecular and genetic approaches has created a wealth of information on responses of ion transporters to environmental cues and the signalling pathways leading to these responses. The signalling pathways involve a number of ubiquitous signalling molecules such as Ca2+ , CNs, ROS and nitric oxide, well-known regulatory proteins such as kinases, phosphatases, calmodulins and 14-3-3 proteins, as well as hormones such as ABA, auxin, ethylene and cytokinin. Nevertheless, there are still substantial gaps in our understanding of the molecular mechanisms that link signalling pathways to transporter abundance and activity. Furthermore, primary receptors perceiving the environmental stimuli still remain to be identified. Active research in the area of ion transport regulation will continue to fill these gaps, and it can be expected that this effort will be supported by continuous improvements of experimental techniques. In particular, phosphoproteomics of membrane proteins (N¨uhse et al., 2004) is likely to reveal much sought information on in vivo (de)phosphorylation events involved in the regulation of ion transporters under various environmental and nutritional conditions.
References Adamo, H.P. and Grimaldi, M.E. (1998) Functional consequences of relocating the C-terminal calmodulin-binding autoinhibitory domains of the plasma membrane Ca2+ pump near the Nterminus. Biochemical Journal 331, 763–766. Aitken, A. (1996) 14-3-3 and its possible role in co-ordinating multiple signaling pathways. Trends in Cell Biology 6, 341–347. Alagem, N., Yesylevskyy, S. and Reuveny, E. (2003) The pore helix is involved in stabilizing the open state of inwardly rectifying K+ channels. Biophysical Journal 85, 300–312. Al-ghazi, Y., Muller, B., Pinloche, S., et al. (2003) Temporal responses of Arabidopsis root architecture to phosphate starvation: evidence for the involvement of auxin signaling. Plant, Cell and Environment 26, 1053–1066. Allen, G.J., Chu, S.P., Harrington, C.L., et al. (2001) A defined range of guard cell calcium oscillation parameters encodes stomatal movements. Nature 411, 1053–1057. Allen, G.J., Chu, S.P., Schumacher, K., et al. (2000) Alteration of stimulus-specific guard cell calcium oscillations and stomatal closing in Arabidopsis det3 mutant. Science 289, 2338–2342. Amtmann, A., Armengaud, P. and Volkov, V. (2004) Potassium nutrition and salt stress. In: Membrane Transport in Plants (ed. Blatt, M.R.), pp. 316–348. Blackwell, Oxford.
REGULATION OF ION TRANSPORTERS
121
Amtmann, A., Hammond, J.P., Armengaud, P. and White, P.J. (2006) Nutrient sensing and signalling in plants: potassium and phosphorus. Advances in Botanical Research 43, 209–257. Angleson, J.K. and Betz, W.J. (1997) Monitoring secretion in real time: capacitance, amperometry and fluorescence compared. Trends in Neurosciences 20, 281–287. Arazi, T., Kaplan, B. and Fromm, H. (2000) A high-affinity calmodulin-binding site in a tobacco plasma-membrane channel protein coincides with a characteristic element of cyclic nucleotidebinding domains. Plant Molecular Biology 42, 591–601. Armengaud, P., Breitling, R. and Amtmann, A. (2004) The potassium-dependent transcriptome of Arabidopsis reveals a prominent role of jasmonic acid in nutrient signaling. Plant Physiology 136, 2556–2576. Armstrong, F., Leung, J., Grabov, A., Brearley, J., Giraudat, J. and Blatt, M.R. (1995) Sensitivity to abscisic acid of guard cell K+ channels is suppressed by abi1-1, a mutant Arabidopsis gene encoding a putative protein phosphatase. Proceedings of the National Academy of Sciences of the United States of America 92, 9520–9524. Axelsen, K.B., Venema, K., Jahn, T., Baunsgaard, L. and Palmgren, M.G. (1999) Molecular dissection of the C-terminal regulatory domain of the plant plasma membrane H+ -ATPase AHA2: mapping of residues that when altered give rise to an activated enzyme. Biochemistry 38, 7227–7234. Baekgaard, L., Fuglsang, A. and Palmgren, M. (2005) Regulation of plant plasma membrane H+ and Ca2+ -ATPases by terminal domains. Journal of Bioenergetics and Biomembranes 37, 369–374. Baekgaard, L., Luoni, L., De Michelis, M.I. and Palmgren, M.G. (2006) The plant plasma membrane Ca2+ pump ACA8 contains overlapping as well as physically separated autoinhibitory and calmodulin-binding domains. The Journal of Biological Chemistry 281, 1058–1065. Baizabal-Aguirre, V.M., Clemens, S., Uozumi, N. and Schroeder, J.I. (1999) Suppression of inwardrectifying K+ channels KAT1 and AKT2 by dominant negative point mutations in the KAT1 alpha-subunit. The Journal of Membrane Biology 167, 119–125. Balague, C., Lin, B., Alcon, C., et al. (2003) HLM1, an essential signaling component in the hypersensitive response, is a member of the cyclic nucleotide-gated channel ion channel family. The Plant Cell 15, 365–379. Batoko, H., Zheng, H.Q., Hawes, C. and Moore, I. (2000) A Rab1 GTPase is required for transport between the endoplasmic reticulum and Golgi apparatus and for normal Golgi movement in plants. The Plant Cell 12, 2201–2217. Baunsgaard, L., Fuglsang, A.T., Jahn, T., Kourthout, H.A.A.J., de Boer, A.H. and Palmgren, M.G. (1998) The 14-3-3 proteins associate