Polysaccharide Association Structures Food Reginald Geneva,
Walter Yo&
MARCEL
DEK KE R
MARCEL DEKKER, INC.
KONG NE...
234 downloads
2805 Views
98MB Size
Report
This content was uploaded by our users and we assume good faith they have the permission to share this book. If you own the copyright to this book and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Start by pressing the button below!
Report copyright / DMCA form
Polysaccharide Association Structures Food Reginald Geneva,
Walter Yo&
MARCEL
DEK KE R
MARCEL DEKKER, INC.
KONG NEW YORK*BASEL*HONG
Library of
Cataloging-in-Publication Data
Polysaccharide association structures in food / edited Reginald H. Walter. p. cm.- (Food science and technology; 87) Includes bibliographical references and index. ISBN 0-8247-0 164-X (alk. paper) 1. Polysaccharides. 2. Macromolecules. industry and trade. I. Walter, Reginald Henry. Series: Food science and technology (Marcei kkker, Inc.); 87. TP248.65.PWP65 664-dc2 1 98-2762 CIP
The publisher offers discounts on this book when ordered in bulk quantities. For more information, write to Special SalesProfessional Marketing at the address below. This book is printed on acid-free paper.
Copyright 8 1998 by MARCEL DEKKER, INC.NI Rights Reserved. Neither this book nor any part may be reproduced or transmitted in anyform or by any means, electronic or mechanical, including photocopying, microfilming, and recording, or by any information storage and retrieval system, without permission in writing from the publisher.
MARCEL DEKKER, INC. 270 Madison Avenue, New York, New York 10016 http://w.dekker.com Current printing (last digit): l 0 9 8 7 6 5 4 3 2 1 PRINTED IN THE UNITED STATES OF AMERICA
Polysaccharides are the basic skeletal component of plant tissues. Inasmuch as polysaccharides do notdepolymerizesubstantiallyduringextractionand purification, isolated polysaccharides, through their macromolecular assemblies, are exploited in the creation of structure and texture, in vitro, in aqueous media, with particular applications in fabricated foods. They frequentlyperforminterchangeably,althoughsubtledifferencesmayelicit different,sometimesunique,behavioramongmembersandisomers,under identicalcombinations stimuli.Thespontaneoustendency dispersed polysaccharidesolutes to aggregatecohesivelyandadhesivelywithother supramolecules. This treatise molecules impels them toward the creation focusesonthephysicochemicaloriginsandstructuresformedbythe aqueous,dispersedpolysaccharideswithlikeandunlike association chemical species. Reginald H. Walter
This Page Intentionally Left Blank
Preface iii Contributors vii
1. Origin
PolysaccharideSupramolecularAssemblies1
Reginald H. Walter
2. PolysaccharideMolecularStructures15 David Oakenfull
3. GelFormationandUltrastructureinFoodPolysaccharides37 Tokuya Harada and Akira Harada
StructuresandPhaseTransitions of StarchPolymers 57 Costas G. Biliaderis
5.
MicrocrystallineCelluloseTechnology169 Gregory S. Buliga, George W Ayling, Gregory R. Krawczyk, and E. J. McGinley
207 6. Cyclodextrins Z. Helena Qi and Matthew L. Romberger 7. Starch-LipidInteractions
227
Ratnajothi Hoover
8. Interactions in Whey ProteinPolysaccharide Mixtures at pH 7 257
I?
B. Fernandes
9. Polysaccharide-MetalInteractions Monique A. V Axelos
273
Rheology Structured Polysaccharide Food Systems: Starch and Pectin 289 Paul E. Okechukwu and M. Anandha Rao Index 329
This Page Intentionally Left Blank
Monique A. V. Axelos InstitutNational de la RechercheAgronomique, Nantes, France George W. Ayling Food Ingredients Division, FMC Corporation, Princeton, New Jersey
Costas G. Biliaderis Department of Food Science and Technology, School of Agriculture, Aristotle University, Thessaloniki, Greece Gregory S. Buliga Food Ingredients Division, FMC Corporation, Princeton, New Jersey
P. B. Fernandes*
Nestec Ltd., Nestle Research Centre, Lausanne,
Switzerland
Akira Harada Department of Macromolecular Science, Graduate School of Science, Osaka University, Osaka, Japan TokuyaHaradat
OsakaUniversity,Osaka,Japan
Ratnajothi Hoover Department of Biochemistry, Memorial University of Newfoundland, St. John's, Newfoundland, Canada Gregory R Krawczyk FoodIngredientsDivision, Princeton, New Jersey
FMC Corporation,
E. J. McGinleyt Food Ingredients Division, FMC Corporation, Princeton, New Jersey 'Current affiliation: Friskies R&D Center Amiens, Amiens, France. 'Deceased.
David Oakenfull CSIRO Division of Food Science and Technology, North Ryde, New South Wales, Australia Paul E. Okechukwu* Department of Food Science and Technology, Corne11 University-Geneva, Geneva, New York HelenaQi Centerfor Expertise-Cyclodextrins, CerestarUSA,Inc., Hammond, Indiana M. Anandha Rao Department of Food Science and Technology, Cornell University-Geneva, Geneva, New York Matthew L. Romberger Sales and Market Development, C*CAVITRON@ Cyclodextrins, Cerestar USA, Inc., Hammond, Indiana Reginald H. Waltert Department of Food Science and Technology, Corne11 University-Geneva, Geneva, New York
*Current ufiliation: The Federal Polytechnic, Oko, Nigeria. 'Retired.
Origin of Polysaccharide Supramolecular Assemblies Reginald H.Walter* Cornel1 University4eneva Geneva, New York
INTRODUCTION Nature is adept at weaving (practically) one-, and three-dimensional structures (Fig. 1) from aqueous, dispersed polysaccharides, through whose instrumentality it imparts form and function to living plant tissues, to wit, the cellulose skeleton of fruits and vegetables. This biopolymer is deposited naturally in bundles of microfibrils that constitute the fibrous and ribbonlike suprastructures of vegetable matter.Native starch is depositedmostly as spheroidal granules. Arguably, macromolecular assemblies with aquatic and microbial polysaccharides, in vivo, have teleological significance. Polysaccharide supramolecules may also be the product of purely chemical synthesis. The natural and chemically synthesized polysaccharides and their derivatives are collectively called gums. This unconventional class of substances is increasinglyrelied on to impartcoherence,body,andtexture to fluid substrate, in vitro. The singular property common to its members is their amphiphilicity, albeit to different degrees, which enables them to associate with polar and nonpolar molecules alike in water (surfactancy). The extent of the surfactant associations is determined by the net force generated as a result of solute-solute,surfactant-solute,andsurfactant-solventinterac*Retired.
1 Natural plant structures: (left to right) partial fascicle of white pine (Pinus stobus), a portion of the leaf base of the coconut palm (Cocus nuciferu), and the loofah of a gourd (Lufla uegyptiaca).
tions and by thermal energy [l].Ionic polysaccharides experience additional coulombic attraction and repulsion. Aqueous polysaccharides display a continuum of disorder-order-disorder and order-disorder-order transitions that ultimately yield flocs, pastes, aggregates, gels, and precipitates.The final outcome is dictated more bythe solute’s aqueous environment and external stimuli than by its chemistry. It is not unusual for different gums to exhibit the same response under a given set of conditions and for the same gum to respond differently to different combinations of stimuli.
II. Some definitions are a necessary precedent to elaborating the tendency of gums to associate in aqueous media. A polymer, synonymouslycalled mucromolecule, is a molecule, 10-103 nm diameter, containing 106-1012 chain atoms [2].Thus, size is conventionally characterized by the degree of polymerization @P) as well as by the molecular weight. The DP, then, is the lengthofapolymer’sunsubstitutedprimarychain,countedinmonomer units. Oligosaccharides are differentiated from polysaccharides by a cutoff molecular weight of 10-20 monomers [3,4]. Chemically, polysaccharides mostly linear polyhydric alcohols, polyacids, or polyesters, consisting of a primary structure that is subject to various configurations (the secondary structure), depending on bond lengths
and angles, theDP, branching, heterogeneity, andsensitivity to the dispersion medium. The topology of a linear polymer is the average of multiple equilibrium geometries of the primary structure. Long, single-bondedchains are conducive to flexibility, and short chains, to rigidity. Unsubstituted primary chains facilitate parallel orientations and contacts between segments of different chains. An amphiphile, containing hydrophobic and hydrophilic groups in the same molecule, enables amphiphilicity to be empirically referenced against a quantifiable tendency to promote oil-in-water and water-in-oil emulsions; this is the hydrophile-lipophile balance [S]. Amphiphilic chain segments resultinorderedmicellaraggregation in solution or bulk[6].Dispersed polysaccharide solutes are prone to micellar aggregation, as a consequence of the high incidence of polar groups [hydroxyl (-OH),carboxyl (-COOH), and/or sulfonic (-OS0,H) groups]: -COOH is common in uronans, and -OS03H in carrageenans. micelle is defined as a spontaneously formed aggregate of tens to hundreds of surfactant molecules or ions Trifunctionality in a polysaccharide monomer accommodatesaggregation by threedimensional crosslinking. The association tendency of some polysaccharides is altered by chemical derivatization, notably esterification and etherification, and that of others by deesterification. Starch and cellulose, for example, are alkylated and hydroxyalkylated to improve performance over the parent molecules’. Pectin is a deesterified biopolymerof protopectin, the native precursor. Neitherthe original nor the derivatized species is truly water-soluble in the classical sense of a monophase; instead, they disperse to a macromolecularly heterogeneous system [8]. polymer molecule in a flow field devoid of adsorbed solvent, traveling at a different rate from the bulk solvent, is said to be free-draining. non-free-draining polysaccharide moleculehas an adsorbed envelope of water traveling at the same rate as the solid core. Non-free-draining water (water of hydration) is therefore an integral part of the discrete colloidal nucleus. Hydrodynamic interaction refers to the influence of the motion of a molecule or segment and its water of hydration on other molecules or segments. Free-draining water is the overwhelming volume of solvent in a solution or dispersion. Inasmuch as free-draining water is not in colIoida1 association with the discrete nucleus, and therefore almost always traveIs with a different velocityfrom it, any identicalness of transport of the discrete nucleus and free-draining water is purely coincidental. Free-draining water is not affected by hydrodynamic interaction. Water of hydration has astabilizing effect on dispersed through a number of different mechanisms [8].
Dispersed polysaccharides structure water at the solid-liquid interface where the water becomes non-free-draining. The influence of a polysaccharide is exercised at concentrations as low as fractions of a percent, where at the binary dispersion can assume the character of either a liquid or a solid, under the influence of solvent conditions and temperature. A dilute dispersion is considered to be one in which there is no solute-solute interaction; in such a “dilute” regime, dispersion properties are additive of the contribution of single molecules. At the highest weight or volume percentagesthe concentrated regime-each property loses its concentration dependence, and, behaving like a polymer melt, the dispersion displays thixotropy, viscoelasticity, or elasticity. At intermediate concentrations,linear dispersedsolute entangles and interpenetrates and hence exhibits unique properties. The critical micelle concentration (c*) is that concentration at which macromolecular properties of a dispersion cease to be concentration-dependent, and the properties obtain from clusters of molecules acting as single hydrocolloidal units. Molecules and segments of a dispersed polysaccharide occupy an excluded volume (vex)that is inaccessible to other segments and molecules. The v,, effect is the net of divers forces acting on the segment or molecule in vex. The free volume (v,) is that vacant volume available for occupancy by any segment or molecule. The volume of a dispersion (V) is the sum of the excluded volume and the free volume:
A large v, is indicative of much space for independent molecular motion; conversely, a small v, suggests a higher probability of polymer-polymer contacts. At the macromolecular level, Eq. (1) is temperature-dependent.The glass transition temperature (T,) is the temperature where v, is zero or constant and translational and rotationalmotions cease, relative to the expanded chain’s motion above T, where Brownian activity engenders increasing v, with increasing temperature. Below Tp v,, expands only as ‘a result of the higher amplitudes of the thermal vibrations Orderedpolysaccharide assemblies (e.g., rods andhelices)showa lower c* than do the disordered assemblies (random coils). Cellulose and cellulose derivatives are inherently stiff rods, because of the @-glycoside bonding and the steric hindrance resulting from the substituents, thereby initiating resistance to segmental rotations. Starch and noncellulose gums freely adopt flexible shapes, because of widespread amorphism. Random coils, rigid rods, stiff chains, etc., define a tertiary structure (conformation). In the vicinity of c* at a critical temperature, modulated by solution conditions, tertiary structures grow into quaternary structures, insofar as points of contact or junction zones multiply into micelles, aggre-
Supramolecular Assemblies Polysaccharide
5
gates, clusters, vesicles, gels, films, and crystals.Clusters of ordered surfactants in oil/water emulsions are typically molecules [lo]. Vesicles are self-ordering closed bilayers wherein amphiphiles are sandwiched between two liquid layers thousands of angstroms apart [ll].Gels are given many definitions, but the common feature is elasticity in the semisolid structure. Gels are the most common form of food polysaccharides. A hydrogel is a dispersion structured as a discontinuous, solid phase in a continuous water phase; a xerogel is a dehydrated hydrogel. Films are two-dimensional xerogels. The mechanics of the macromolecular associations initiating these structures include interpenetration of random coils,multiple coupling of single and double helices, orientation of rods, and electrostatic crosslinking in homogeneous and mixed junction zones. The quaternary ordering of rods and stiff chains along the molecular axis eventuates into mesomorphic phases that are intermediate between a liquid and a crystalline solid. These mesomorphs, or liquid crystals, remarkable for their appearance as a solid at rest and as a liquid when disturbed, possess unique features, e.g., dichroism and birefringence.Their generally depends on chain rigidity[l21 that in turn is a complicated function ofsideand main-chain lengths, side-chain chemistry, and temperature [13]. Mesophases are classified as lyotropic, if the self-organization results from interaction with an amphiphilic surfactant cosolute, which enables them to be disordered by solvent action; they are classified as thermotropic, if the selforganization develops in an usually narrow temperature interval. A linear, random-coil polymer has been theoretically modeled after a sphere. It should be recalled that a sphere has the lowest area/volume ratio of all known geometries. The normally hydrated polysaccharides are preferably represented by an equivalent hydrodynamic sphere that is assumed to have properties andexhibit responses identical to those of its linear counterpart. Spherical [l41 and circular [l51 polysaccharide suprastructureshave been observed experimentally.The volume of this equivalent hydrodynamic sphere is delimited by the hydrodynamic radius, Rh, the radius of gyration, R,, or the rootmean square end-to-enddistance, (r2)IR,i.e., the average distance between the two ends of a chain. The relationship between R,,, R,, and is as follows [9,16]:
The squared function averages the distances of all solute molecules in a positive and negative direction from the center of mass. Water of hydration creates long distances between non-free-draining coils, giving a longer Rh and R,. Rodlike polysaccharides are dimensionally thicker,i.e., give a shorter
Walter (?)ln for the same mass. Polyelectrolytes are postulated over a wide range of concentrations to be infinitely long cylinders on which exists a critical charge density that controls the polyanion-counterion equilibrium distance in solution [17].Because R,,, R, and are difficult and expensive to measure, dispersed polysaccharides are more frequently characterized by the easier, less expensive rheological methods. A fluid may be distinguishedby laminar shear flow-meaning a force per unit area (pressure, synonymous with stress, IT) is imposed tangentially on parallel fluid planes of unit thickness, causing each plane to be transported in a gradient ofunitdistanceperunittime,and yielding a mass.distance"time" coefficient called the shear viscosity. Rodlike polysaccharides have higher intrinsic viscosities than random-coil polysaccharides at the same molecular weight. deformation ofthe fluid by IT^ without transport, is defined as the strain (E), resulting from a series of "jumps" of the molecules from hole to hole [g] or U, subsites. Viscoelasticfluids recover E, up to a critical maximum (the yield point, IT,), whereupon viscous transport begins, in an attempt bythe fluid to assume a new equilibrium position. An elastic fluid does not have a IT,; when IT is withdrawn, it reverts to its original shape in a finite, albeit occasionally long, timeinterval (relaxation). Rods have longer relaxation times than random coils [18]. Elasticity is characterized by Hooke's equation:
IT
= GE
G is the modulus of elasticity elastic modulus, rigidity modulus, bulk modulus, stress relaxation modulus, distinguished by the experimental design). E has dimensions of linear, angular,or frequency displacement. Equation is quite sensitive to heat. Weak gels are characterized by a small G, and strong gels, by a large G . The effect of commingling unlike polymers in a single solvent may be additive, complementary, synergistic, or antagonistic. additive property is the sum of the property of individual polymers. In complementarity, one molecular species of a polymer provides a property that the other polymer lacks. Synergism is the effect of the combined population of molecules greater than the additive effect. An antugonistic ternary dispersionmanifests solute incompatibilitybyaphase-separation process called coacervation, whereby one of the two phases (coacervates) contains a major concentration in the solvent of one solute and a minor concentration of the other, and the (usuother phase, vice versa. Coacervation of a polysaccharide and a protein allygelatin) is employedindustriallyto encapsulate delicate flavorand aroma compounds. A polysaccharide polyanion is sensitive to small changes in electrolyte concentration, including acid. For this reason, ionic polysaccharides exhibit
two regions of viscosity with increasing concentration. The first region (the electroviscous region), involving polysaccharide-water interaction, declines to a minimum as the negative charges become progressively more screened by counterions; the second region involves polysaccharide-polysaccharide interaction to c*, after complete screening of the polyanionic charge. Cyclodextrins are synthetic polysaccharidesmadebycyclization of sugar monomers. The ring structure is formed in a manner that orients the hydroxyl groups on the outside and the hydrogen atoms on the inside, with the result that the hollow interior is conducive to hydrophobic interactions: for example, P-cyclodextrin is added to liquid food for the purpose of complexing and removing undesirable lyophilic compounds. Clyclodextrin molecules also aggregate to form supramolecular structures.
Entropy is an empirical index ofthe amount of energyin a system,including adispersion,that is unavailable for exchange with its environment. The higher the index, the more unavailable energy is for exchange and the more highly disorganized the dispersed solute is in the dispersion medium. The dissolution in water of a polysaccharide xerogel requires a form of supplied through heating, shearing, agitation, sonication, etc. Homogenization is amechanical process of introducing +hE by forcing a suspensionthroughmicron-sizeorifices. The process results in ahigher count of smaller particles and hence a largersurface area. Thermal and other mechanical processes defibrillate double helices. The surface tension of a solid or liquid is an unbalanced force per unit area, directed toward the solid or liquid interior, measured against air. This net force is alternatively definedas the isothermal work necessary to increase a surface by 1 cm’. Work is the product of force anddistance.Having magnitude and direction, surface tension is a vector quantity. The interfacial tension is the surface tension measured at an interface other than air, i.e., a solid-solid, liquid-solid, or liquid-liquid interface. The surface tension can be lower than 10-l’ N and still influence the properties of a hydrocolloidal system [19]. The surface tension of solids is negligible. As aresult of surface tension,many small and large molecules in solution or dispersion become adsorbed at a polysaccharide-water interface. Cosolutes, electrolytes, and solvent molecules engage in typically monopole-dipole, dipole-dipole, ion-dipole, and ion-ion interactions at the adsorbent surface. Although theseinteractions are theoretically bimolecular, the large volume of free-draining water normally present in a purely
+hE
Walter
binarypolysaccharide-water dispersion effectively makes themunimolecular. The adsorption of small molecules on a polysaccharide surface at a polysaccharide-water interface terminates at an equilibrium monolayer concentration, but the adsorption of macromolecules is multilayered and indefinite. Based on experimental observation, it is widely believed that incompletely saturated surfaces are attractive and prone to bridging flocculation, whereas completely saturated surfaces are repulsive and prone to steric stabilization [20]. The temporary storage site of +AE is the expanded surface area (A) of the dispersed, disaggregated, or defibrillated solute:
AE = uA
(5)
is the surface tension. Homogenization stabilizes a dispersion not only by reducing the size of the discrete solute particles, but also by increasing A . The process transforms a polysaccharide dispersion from a comparatively lower to a higher energy state. Notwithstanding the higher +m,the subsequent thermodynamically unstable state can remain kinetically stable for a duration by adding a protective colloid to the binary dispersion. There is a loss of entropy uponintroducing a protective colloid into the system. +AE spontaneouslydeclines,however, in conformity with the law of entropy stating that accumulated energy in any physical process is equalized with time between a system and its surroundings. condition of -hE begins to prevail by a decrease inthe areahohme ratio, as cohesion of solute particles exceeds adhesion betweenwater and polysaccharide. Says Israelachvili [19], the associated state of like molecules is energetically preferred to the dispersed state. Alternatively stated, there is always an effective attraction between like molecules or particles in a nonantagonistic, multicomponent mixture.Macromolecular assemblies are reversible with energyintervention. Micronized solute may remain suspended indefinitely, depending on the density difference between the dispersed phase and water. This is the case of an aqueous suspension of microdefibrillated cellulose [21]. Ionic polysaccharides conceptually order themselves in water into a primary layer of polyanions surrounded by a secondarylayer of counterions. This organization generates a dispersion-stabilizing electrochemical potential-the Zeta potential. Electrolytes electrokinetically disrupt this doublelayer organization (and, as a result, the Zeta potential) by shortening the interaction distance between the two layers of opposite charges. Nonsolvents, e.g., alcohol and acetone, also disrupt the organization, but by lowering the dielectric constant of the aqueous medium. Collapse of the double layer accelerates neutralization of the primary charge and an ensuing high incidence of solute-solute interaction, penultimately to aggregation, gelation, and precipitation.
Supramolecular Assemblies Polysaccharide
9
Small quantities of ionic polysaccharides may destabilize a dispersion through bridging flocculation, whereby a “bridge” is constructed between two or more primary solute molecules, causing a larger structure to precipitate. Divalent ions are efficient “bridges” for cooperatively,bonding linear polyanions (A-?. In cooperative association, the first bond autocatalyzes a series of identical interactions until A[(x/2)MJis complete. Bridging flocculation is particularly useful in water clarification.
It is universally accepted that a polymer in dilute solution behaves as an ideal gas, in compliance with the Charles-Boyle combined law stating that
is the osmotic pressure, diis the density of particles each with volume vi, and T is the absolute temperature. If ni is the number of dilutely dispersed polysaccharide random coils, then
Nci n.= ‘ M v,, = nivi
N is Avogadro’s number, and ci is in gramsiliter. Since water has a low compressibility (0.000048 per atm at 20°C), M, nivi, and T are constant, but and vi separately and in Eqs. are.variable. Accordingly, at a constant temperature, for a given quantity of solute, either ni or uichanges with changes in if n, increases, vi decreases and A increases (homogenization). +AI3 is stored in the larger surface area, after being partly compensated for by the stabilizing influence of the interfacial tension of the adsorbed water. Brownianmotion brings the equivalent hydrodynamic spheres into close proximity, where, at an equilibrium distance, the collision diameter is twice the radius (R;) of each sphere. At R;, the particles’ energy status is a primary minimum corresponding to the maximum possible state of thermodynamic stability, barring fusion. Distances shorter than R; are impermissible, except by an endothermic chemical reaction. In contradistinction
v.,
Walter
+hE
to thermodynamicstability, kinetic stability is a condition of of a dispersed solute, maintained by a variety of physical means, e.g., micronization, solvent viscosity enhancement, and protective colloid action. At constant pressure and temperature, the law of entropy is accommodated by aging-a time-dependent condition. Just how the total surface area (Ai) is affected by particle growth is illustrated in Eqs. 10-12. For a constant volume hydrodynamic spheres (2 vi = with radius R;,
(t)
3 Ai = R;
Equations 10-12 comply with the law of entropy by lowering the ni count and enlarging vi, attendant with a heightened probability of segmentsegment contacts (particlegrowth). According to Eq. (12), the changing relationship between the volume and the surface area of dispersed polysaccharide solute is governed by the factor 3/R;. The same logic applied to a double helix = ~ITR;~/[(ITRA~~] gives the factor 2/Ri. X is only approximately constant, because the shift at the particle interface of a small increment of free-draining water to and from thelarge volume of nonfree-draining water, as R; changes. The concentration-dependence of IT in dilute dispersions complies with a power-law equation:
- = KT[(ci/Mi)+ PC:
+ P‘c: + - -3
Ci
K is the gas constant, Mi is the molecular weight of component i at concentration ci, and and are interaction coefficients (also called second andthird virial coefficients). At infinitely dilute concentrations inwhich properties are assumed to be free of effects, the dispersion is characterized by and = 0. At intermediate concentrations(the semidiluteregime), entanglements of flexible,random-coilpolysaccharidemolecules impose constraints on each other’s lateral and rotational motion, thus enabling them to flow only translationally (reptation), which consequently lowers the configurational entropy and raises the free energy of the confined molecules. *Note that wRL3 contains the dimensions of work (i.e., work = length’
X
distance).
Polysaccharide Supramolecular Assemblies
11
The Huggins equation [22] is another power-law equation commonly used to characterize dilute solutions of linear polymers: = [q] + k[q12ci qJci is the viscosity number,[q] is the intrinsic viscosity, andk, the Huggins interaction coefficient, was inserted account for the sizes, shapes and cohesional properties of long-chain molecules. In the semidilute regime, the viscosity of a polysaccharidedispersion is many orders of magnitude higher than the linear relationship expected from Eq. The properties of an elastic mass are independent of ci.
The structuring of polysaccharides may be accomplished by manipulating the temperature.From 0 K upward, water and solute in mostpolysaccharide-water binary suspensions remain in a separate phase to an upper critical solution or upper consolute temperature (Tc),where they merge. In the same direction, some cellulose derivatives, for example, in a macroscopically homogeneous dispersion, remaina monophase to a lower T, where they and water exist separately. The lower T, of the cellulose derivatives is in the vicinity of 45°C.
Polysaccharide flocs, aggregates, gels, precipitates, etc., are fractal objects, not amenable to Euclidean geometric analysis, given their complex outlines. They are instead characterized mathematically by a fractal dimension [23]. The fractal dimension of a random-coil polymer is between and 2, and that of a gel (casein and gelatin) is 2-2.3 [24].
Any manipulated stimulus, e.g., high molecular weight, high concentration and high pressure, electrolytes, cosolute and nonsolvent additions, and low temperatures is capable of enhancing the probability of solute-solute interation and,ultimately, of structuring apolysaccharidedispersion on the solute’s way toward thermodynamic equilibrium. This energy state is in-
imical to functionality, conditions are made favorable for the solute to remain indefinitely in a state of kinetic equilibrium with its dispersion medium: such conditions may include homogenization, adding thickeners, and maintaining high storage temperatures. The structures formed are not easily characterized, except by rheology and fractal dimensional analysis.
1. Mukejee, P. Differing patterns of self-association and micelle formation of hydrophobic solutes. In:vanOlphen, H., andMysels, K J.,eds., Physical Chemistry: Enriching Topics from Colloid and Surface Science. International Union of Pure and Applied Chemistry Commission I. 6, Colloid and Surface Chemistry, Theorex, La Jolla, Calif. (1975). 2. Biben, T.,Hansen, J.-P., and Liiwen, H. Some aspects of the statistical mechanics of concentrated colloidal suspensions. In: Chen, S.-H., Huang, J. S., and Tartaglia,P., eds., Structure and Dynamics Strongly InteractingColloids and Supramolecular Aggregates in Solution, Kluwer Academic, London, p. 23 (1992). 3. Munk, P. Introduction to Macromolecular Science. Wiley Interscience, New York, p. 7 (1989). 4. Ikan, R.Natural Products: A Laboratory Guide. Academic Press, New York, p. 76. (1991). 5. Vold, R.D., and Vold, M. J. Colloid and Interface Chemistry.Addison-Wesley, London, p. 397 (1983). 6. Finkelmann, H., and Jahns, E. Liquid crystalline phases of polymers. In: ElNokaly, M. A., ed., Polymer Association Structures: Microemulsions andLiquid Crystals. ACS Symposium Series 384, Amer. Chem. Soc., Wash., D.C., p. 19 (1989). 7. Schramm, L.L. The Language of Colloid and Interface Science. American Chemical Society, Washington, D.C. (1993). 8. Walter, R.H. Polysaccharide Dispersions: Chemistry and Technologyin Food. Academic Press, New York (1997). 9. Cowie, J. M.G. Polymers:ChemistryandPhysics of ModernMaterials. Blackie Academic & Professional, New York (1991). 10. Domb, C., and Lebowitz, J. Preface to Vol. 16. In: Gompper, G., and Schick, M., eds., Self-Assembling Amphiphilic Systems. Academic Press, New York, p. ix (1994). 11. Gompper, G., and Schick, M. The phenomena and approaches to them. In: Gompper, G., and Schick, M., eds., Self-Assembling Amphiphilic Systems.Academic Press, New York, pp. 4ff (1994). 12. Guo, J.-X., and Gray, D. G. Lyotropic cellulose liquid crystals. In: Gilbert, R. D., ed., Cellulosic Polymers Blends and Composites.Hanser Publ., New York, p. 29 (1994).
Polysaccharide Supramolecular Assemblies
13
13. Fukuda, T., Takada, A., and Miyamoto, T. Thermotropic cellulose derivatives. In: Gilbert, R. D., ed., Cellulosic Polymers Blends and Composites. Hanser Publ., New York, pp. 47-55 (1994). 14. Stokke, B. T.,Elgsaeter, A., and Kitamura, S. Pregel cluster formation in gelling polysaccharides visualized by electron microscopy. Polym. Gels Networks 173-190 (1994). 15. Zhao, J., and Whistler, R. L. Spherical aggregates of starch granules as flavor carriers. Food Technol., July, pp. 104ff (1994). 16. Tanford, C. Physical Chemistry of Macromolecules. Wiley, New York, p. 344 (1961). 17. Eisenberg, H. Biological Macromoleculesand,Polyelectrolytes inSolution. Oxford University Press, Oxford, England, pp. 233 ff (197x). 18. Doi, M., and Edwards, S. F. TheTheory of PolymerDynamics. Clarendon Press, Oxford, England, pp. 140, 289 (1986). 19. Israelachvili, J. N. Intermolecular and&$ace Forces, 2nd ed. Academic Press, New York, p. 172 (1992). 20. La Mer, V.K, and Healy, T. W. Adsorption-flocculation reactions of macromolecules at the solid-liquid interface. Rev. Pure Applied Chem. 13: 112-133 (1963). 21. Weibel, M. K Microdisassembled cellulose as a new food ingredient. Abstract, International Hydrocolloids Conference, Sept. 6-10, Ohio State Univ., Columbus, Ohio (1994). 22. Huggins, M. L.The viscosity of dilute solutions of long-chain molecules. W. Dependence on concentration. J. Am. Chem. Soc. 64: 2716-2718 (1942). 23. Borman, S. Fractals offer mathematical tool for study of complex chemical systems. Chem. Eng. News (April 22nd): 28-35 (1991). 24. Birdi, K.S. FractalsinChemistry,Geochemistry,andBiophysics. Plenum, New York (1993).
This Page Intentionally Left Blank
Polysaccharide Molecular David OakenfhH CSIRO Division
Food Science and Technology North Ryde, New South Wales, Australia
Chambers’ Dictionary of ScienceandTechnology [l1 defines molecular structure as “The way in which atoms are linked together in a moIemle.” Structure is fundamental to our understanding of biopolymers. The major biopolymers-nucleic acids, proteins, and polysaccharides-have well-defined structures. In the nucleic acids, the sequence of the nucleotide bases defines the genetic information, andthe polymer as a whole adopts the wellknown double helix structure. Proteins can have an almost infinite variety of structures, depending on the functional role the protein in the living organism. They can be as diverse as keratin (hair and fingernails) and lysozyme (the water-soluble enzyme present as an antiseptic intears) [2]. Polysaccharide structures are less varied than those uf proteins, hence the morelimited role of polysaccharides in living systems. Polysaccharides nonetheless can have well-defined structures that vary with the functional role of the polysaccharide in the living organism. These functions are nearly as varied as thase of proteins. Polysaccharides canbe structural components of the cell walls ofplants, or theycanbeinvolved in antigen-antibody recognition and hormone receptor interactions, or they may simply act as energy reserves. Because of their biologicalimportance, proteins have been studied more intensively than polysaccharides. It is therefore instructive to compare the structural chemistry of polysaccharides with the more familiar structural
chemistry of proteins. Linderstrom-Lang tural organization in proteins:
Primary structure
Secondary structure
identified four levels of struc-
The amino acid sequence. There are 20 common amino acids. The number and sequence of these linked together by peptide bonds constitutes the primary structure of the protein. The regular arrangements of the polypeptide backbone, without reference to the amino acid side chains. The most regular structures are the a-helix and the P-pleated sheet -stabilized by hydrogen bonds between the carbonyl and imide groups of the backbone:
>c=o... HN< Tertiary structure
Quaternary structure
The three-dimensional structure of the protein molecule as a whole. Typically there might be separate regions of ahelix structure or P-pleated sheet. Interactions of the individual amino acid side chains (hydrogen bonds, hydrophobic interactions, electrostatic forces) now become important in maintaining the stability and structural integrity of the folded protein. The structures of aggregates of globular proteins.Hemoglobin (a tetramer) is a well-known example of an aggregated protein.
The same levels of structural organization also occur in polysaccharides. Polysaccharides may contain a number of different monosaccharide units. (The most commonly occurring of these are shown in Fig. 1.) The numberanddistribution of these along the polymer chain constitute the primary structure. These monosaccharides can be linked in different ways that restrict their freedom of motion with respect to each other and impose secondary structure on the polymer chain. Where there are regularities in primarystructure,polysaccharidescan adopt sterically regularsecondary conformations, e.g., helices or ribbons. These ordered structures can sometimes further aggregate to form tertiary, crystal-like structures, as in cellulose. Association of ordered tertiary structures (e.g., double helices) may lead to quaternary structures, as occur when polysaccharides form gels. These four levels of structure are described in this chapter. But firstit is necessary to understand the nature of the monosaccharides units from which these structures are built.
Polysaccharide Molecular Structures
Hc)H
H
CH3
OH
A
H0
A
OH
H
H 0 OH
H
OH
a-Dglucose
H
H
a-Dmannose
H a-Dgalactose
COOH
CHpOH
NH2 a-Dgalactosarnine
Figure
BD-fructose
a-D-xylose
aD-rharnnose
H
OH
OH
a-Dgluatronic acid
a-larabinose
Structures of the more common naturally occurring monosaccharides.
II. Polysaccharides are composed linked monosaccharide units,of which the commonest is D-glucose. The structure of glucose is shown in Fig. 2. Glucose is an aldohexose, a six-carbon aldehyde, with five hydroxyl groups. The six carbon atoms are conventionally numbered from the aldehyde end, as shown in Fig. 2. This structure has four asymmetric carbon atoms:
CHO-C*HOH-C*HOH-C*HOH-C*HOH-CHZOH
A
I
2 Representations of D- and L-glucose in open chains and a-D-glucose and a-L-glucose in ring
which means that there are sixteen (24) possible stereoisomers;but only three of these occur in nature: mglucose, D-galactose, and D-mannose.Glucose is dextrorotatory; hence the designation “D.” But in other sugars the designation “D” does not necessarily mean that the compound is dextrorotatory. The convention is to use “D” to indicate sugars in the same stereochemical series, as shown in Fig. monosaccharide is of the D-family if the asymmetric carbon atom most remote from the carbonyl (reference) group has the same conformation as mglyceraldehyda (also shown in Fig. ‘The compound conventionally called D-fructose is in fact levorotatory (sometimes indicated by the name (D-(-)-fructose). Fructose is a ketohexose. It also has six carbons and five hydroxyl groups, but with a ketone group in the 2-position. When in solution, the monosaccharide chain takes upa ring form through a reversible intramolecular reaction betweenthe aldehyde group and one of the hydroxyl groups, forming a hemiacetal (also shown in Fig. 2). glycoside having a six-membered pyran ring is a pyranose, and one corre-
Polysaccharide Molecular Structures CH0
CH0
I
I
H?-OH CHpOH
HO-C-H I CHpOH
D-glyceraldehyde
L-glyceraldehyde
?H0 H-C-OH I H - C - O HH - C - O H
I
HO-C-H I
I I H-C-OH H-C-OH I I H - C - O H H - C - O HH - C - O H I I C HpOH CHzOH D-allose D-glucose
H-C-OH I HO-C-H I H-C-OH I I CHpOH
D-galactose
CH0 I
HO-C-H I HO-C-H H-C-OH I
H4j-OH CHpOH Dmannose
D-altrose
CH0CH0 CH0 I I HO-C-H H T - O HH 0 - p - IH T - O H I HO-C-H HO-C-H I I HO-C-H HO-C-H I I H-C-OH H-C-OH I I CbOH CHpOH D-talose
I
CH0 I H-C-OH I HO-C-H I H-C-OH I CH2OH Didose
Figure 3 Structures of D- andL-glyceraldehydeand from D-glyceraldehyde.
H-C-OH I HO-C-H I H-C-OH
I
CHzOH D-gulose
the D-hexoses “derived”
sponding to the five-membered furan ring is a furanose (Fig. For each of these ring forms, two isomers (anomers) are possible, because a new asymmetric center is created by the ring closure at the reducing carbon atom. h o m e r s are distinguished from each other by the Greek letters and p. For a cyclic D-aldohexose oriented in the standard way, the a anomer has
k pyranoside
furen
4 Pyranandfuranandthepyranoseandfuranose
furanoside
forms
a hexose.
the hydroxyl groups on C l projecting below the plane of the ring, while the anomer has the hydroxyl group directed above the plane of the ring. Thus for glucose, the a and forms of the ring have mirror-image stereochemistry at Cl, as shown in Fig. A freshly prepared glucose solution shows a specific rotation ([a],,) of +113O, which gradually decreases on standing to +52”. This establishment ofan equilibrium between each of the ring forms and the open chain is known as mutarotation (Fig. 5). In the case of solution of glucose at room temperature, the approximate relative proportions of each form is a-D-glucopyranose 35%, g-D-glucopyranose 61%, and a-D-glucofuranose and @-Dglucofuranose together It is clear from this distribution that the form is more thermodynamically stable than the a form, and the six-membered pyranose ring form is more stable than the five-membered furanose form. The component sugars of most food polysaccharides normally occur in the polymer chain in the six-membered pyranose ring form. The open chain form represents only 0.0026%, but it is nonetheless very important because it is this structure thatpossesses the active aldehyderesponsible for the reducing reactions of the monosaccharide. The ordinary, or a,form of glucose is obtained by crystallization from alcohol-water;the form is obtained by crystallization from a highly concentrated aqueous solution at elevated temperature (110OC). Mutarotation also occurs in oligosaccharides and polysaccharides, as long as the reducing end (aldehyde) is maintained. The ring structure is always shown in the chair conformation. Boat conformations are energetically unstable because of eclipsing of bonds and steric compression between the “peaks” (e.g., between substituents on Cl and C4), as shown in Fig. 6 The relative probability of adoption of the two chair conformations is determined by minimization of steric repulsion between axial substituents. This means that D-hexoses have almost exclusively the ,C, conformation and L-hexoses the ‘C, conformation, as shown in Fig. 7.
Polysaccharide Molecular Structures
zb I
gy
Figure Mutarotation of D-glucose in aqueous solution. At equilibrium, the approximate relative proportions of each form are a-D-glucopyranose 35%, P-D-~~ucopyranose 61%, and a-D-and P-D-glUCOfuranOSe together (see text).
Figure Pyranose ring forms. In addition to the two boatlike ring shapes shown, two further pairs of boat conformations are possible with C-2 and C-S or C-3 and C-5 above or below the plane of the other ring atoms.
a
a
a
D
Thepyranoseringgeometry of D and L sugarsintheirnormal(energetically preferred) conformations. These structures minimize steric repulsion between axial substituents (indicated by “a”). D-Hexoses have almost exclusively the 4C1conformation and L-hexoses the ‘C., conformation (see text).
Morecomplex structures are formed when hydroxyl groups from other monosaccharide molecules react with the hemiacetal, forming a glycosidic link, creating firstly a disaccharide and then ultimately a polysaccharide. In the case of D-glucose, a glycosidic link can be formed between Cl of one glucose moleculeand Cl, C2, C3,C4, or C6 or another, thatmany different structures are possible, at least in principle. The linkage is defined by the configuration at Cl (i.e., whether it is a or and the carbon atom of the ring to which it is linked via an oxygen atom. The familiar disaccharide sucrose is P-D-fructofuranosyl-a-D-glucopyranoside (Fig. It is formed from glucose and fructose linked a(l-.2), with the fructose in the furanose form (because of the positionof the keto-group)and in the p configuration. The covalent linkages between adjacent residues do not act as “universal joints” but are normally limited to a narrow range of conformational possibilities, thereby imposing preferred shapes, or secondary structure, on the geometry of the polysaccharide chain. The nature of the linkage has a dominant effecton the structure of the molecule. It is instructive to compare
CHzOH
OH
Structure of sucrose (~-D-fruCtOfuranOSyl-or-D-glucopyranoside).
O\
k
CH20H
/ wlloblose
H h
H
OH
OH
manose
cellobiose
Structures of the disaccharides maltose and cellobiose, showing how the linkage geometry influences the shape of the molecule.
the two disaccharides cellobiose and maltose. Both are dimers of glucose. In cellobiose the glucose units are linked p(1+4); in maltose theyare linked a(1-4). These molecules have different shapes, as shown in Fig. 9, and they have different physical properties (Table 1). The molecular structure of a disaccharide is therefore defined by the relative orientation of the component monosaccharide units.This, in turn, is
Maltose
Properties of Glucose Dimers: Cellobiose Linkage] Cellobiose
Melting point Taste Susceptibility to enzymic degradation
-
Maltose
~~
Decomposes at 225°C Not sweet Not fermented by yeast, maltase, or invertase
'Values before and after mutarotation.
Linkage] and
~~~~
-
Sweet Fermented by yeast and maltase
+
+,
defined by the rotational angles and as shown in Fig. 10; in addition, 1-6 linkages introduce the further possibility of rotation about the (C5)(C6) bond. For any two adjacent residues, the conformation energy associated with a particular pair of and values can be estimated using potential energy functions for van der Waals interactions, polar, torsional, and hydrogen bonding interactions. This is illustrated in Fig. 11, which shows the results of calculations for maltose and cellobiose [5]. Most conformations are energetically very unfavorable; the molecule is effectively trapped within a potential energy well that restricts its conformational freedom. The positions of the potential energy minima depend on the state of the moleculewhether it is in the crystalline state, in solution in a nonaqueous solvent, or in solution in water. (Hydrogen bonds strongly influence the conformation in nonaqueous solvents and in the crystalline state, but in water they are weaker because of competition from water molecules for hydrogen bonding sites.) The calculated positions of the potential energy minima (+ and values) agree well with experimentally determined structures. Polysaccharide structures are similarly determined bythe nature of the linkages between the monosaccharide units. The monosaccharides present are also important, but physical properties (such as solubility, viscosity, and gelation characteristics) are determined more bythe linkages than the nature of the monosaccharide units [6]. Figure 12 shows a chain of P(1+4)-1inked D-glucopyranose units. In solution the molecule is in continuous motion. If we allow free rotation about the C-0 bonds of the glycosidic linkages (as shown), the molecule is highly flexible. It can writhe and twist, continuously changing shape. A polymer molecule that behaves in this way is said to be a random coil. It has no well-defined shape or size. The onlymeaningfulparameter is the mean square end-to-end distance, This would typically be several orders of magnitude smaller than the molecule’s contour length (thedistance between the two ends when the molecule is stretched out to its fullest extent). In reality, however, interactions between adjacent units limit the freedom of
+
+
+
Rotational angles between adjacent monosaccharide units. Relative entations of adjacent monosaccharide units joined by glycosidic a linkageare defined by the two rotational angles 9 and I$.
-
180 -
90 -
60 -
0 -
I
l
I
0
4 Conformational mobilityof polysaccharide chains. Energetically feasible conformations of adjacent residues are confined to a narrow range of conformations illustrated here for cellulose. Shaded areas show conformations whose computed potential energy lies within 20 kJ/mole of the potential energy minimum (M). The probability of adoption of any higher energy conformation is less than 1 in 3000 at 25°C.(From Ref. 6.)
rotation, as we saw earlier for disaccharides. In this case, some conformations are energetically preferred over others. This is illustrated in Fig. which shows the structures of three glucose polymerswithverydifferentphysicalproperties.Cellulose, with linkages, is the major structural material of land plants, familiar in almost pure form as cotton. Its insolubility and its ability to form fibers are consequences of its regular structure, which enables the molecules to adopt ordered crystalline arrays of polysaccharide chains held together by hydrogen bonds (Fig. In contrast, amylose, with linkages, is water soluble and adopts a helical structure, forming gels (discussed in more detail below). Curdlan, linked is another gel-forming polysaccharide that forms helical structures. The mixed linkage “~-glucans”(present in barley and oat bran) have and linkages. This irregular structure prevents the formation of ordered crystalline arrays, in contrast to cellulose (also a ‘p-glucan’), these polysaccharides tend to be water soluble. Branching is introduced by disubstitution of a single residue. Branched structures, as in the arabinoxylans in wheat, are unable to adopt ordered
”\
C””
-c
P
r----=\
0
0
Three glucosepolymers. (1) cellulose linked); curdlan 1,3 linked); (3) amylose (a-1,4 linked). Cellulose is typical “type A” polysaccharides, which have a “trans” bonding arrangement across the sugar ring. Curdlan and amylose have “cis” bondingarrangementsandaretypical “type B” (see text).
4 l
l I
Hydrogen-bonded crystalline structure cellulose. Schematic diagram of the unit cell showing three the five cellobiose residues.
crystalline structures. Such compounds are also water soluble, as are polysaccharides with charged groups (COO- or SO;), such as the pectins and carrageenans. When charged groups are abundant along the polysaccharide chain, electrostatic repulsion prevents the molecules from packing close together in ordered structures Polysaccharide structures frequently show asimple repeating sequence. The carrageenans are based on a disaccharide unit of 3-linked P-D-galactose and 4-linked om-galactose, but with the different carrageenans having different degrees of sulfation of the monosaccharide residues and different extents of conversion of the 3-linked residue to the anhydride ring-form (Fig. 15). Similarly, pectin is essentially a homopolymer of cr(l+4)-linked galacturonic acid,but pectins of different origin showdifferent extents of methyl esterification. In general, structurally regular polysaccharides adopt sterically regular crystal-like conformations in the solid state that can be characterized by X-ray fiber diffraction.These structures correspond to fixed values of the rotational angles between adjacent residues (4 and $) rather than a statistical distribution of orientations, as for random coils in solution. Because the ring geometry is essentially fixed, it is convenient to treat the
SO3-
H
Structure and chain flexibility of the carrageenans. (1) (R = H) and L-carrageenan (R = SO;); Linkage of the anhydrogalactose residue (which is held in the ‘C.,chair form) is through equatorial bonds that allow considerable conformational freedom. These carrageenans form helical structures that crosslink to form gel networks. (2) X-carrageenan; in the absence the anhydride bridge, the preferred ring in 4C, and the linkage is then through axial bonds, imposing greater steric restriction on the chain geometry. X-Carrageenan does not form gels.
entire sugar ring as a single “virtual” bond [7]. classes of structure can be formed, again depending on the linkage geometry: Polysaccharideswith a “trans” bonding arrangement across the monosaccharide ring, termed “type A’, by Rees and Scott [8] (Fig. 13). These structures adopt ribbonlike conformations, of which cellulose is a typical example. Polysaccharides with a “cis” bonding arrangement across the ring, termed “type B” (Fig. 13). These structures from hollow helices, usually multistranded. and L-carrageenan andagarose form double helices; curdlan forms triple helices. These ordered conformations are stabilized by noncovalent interactions, particularly hydrogen bonds and sometimes electrostatic forces. It is important to emphasize that not all the molecules are in the ordered conformation. The system is always one of dynamic equilibrium, where the most energetically favored structure is statistically the most prob-
able, but other,less energetically favoredstructures are also present. Ordered conformations are destabilized by the loss of conformational entropy (that accompanies their formation), by structural irregularities, by branching, and by electrostatic repulsionbetweenchargedgroups. Opposing molecular forces are often delicately balanced, andsmall perturbations cancause abrupt change from an ordered toadisordered state (or vice versa). Figure 16 illustrates this effect for the case of K-carrageenan. In solution in water, inthe cold and in the presence of potassium-ions, K-carrageenan forms double helical structures. On heating, these structures “melt.” The molecules undergo a helix-to-coil transition, passing from an ordered state to the random-coil state at a well-defined temperature (Tc). This transition is accompanied by a change in optical rotation, as shown in Fig. 17. The process is reversible. On cooling, the K-carrageenan reverts to the helical structure, again at a well-defined transition temperature (Th).Qpically in such systems there is hysteresis, with a significant difference between T, and Th. Figure 17 also shows the effect of temperature on optical rotation for the same concentration of K-carrageenan in the absence of added potassiumchloride.In this case, there is nocoil-to-helixtransition. The added electrolyte is required to shield the negatively charged sulfate groups of the carrageenan as to reduce electrostatic repulsion enough to allow helix formation. If potassium chloride is added to a solution ofK-carrageenan at below the helix-to-coil transition temperature, the polysaccharide rapidly folds into the helical conformation. Norton and his colleagues used stopped-flow polarimetry to study this reaction and showed it to be second order, implying that the structure being formed is indeed a double helix, formed from a union of two molecules of K-carrageenan. Ordered structures are not necessarily continuous along the full length of the polysaccharide molecule. Often, odd monosaccharide residues occur along the chain that disrupt the ordered structure. For example, the carrageenan double helix is interrupted by the presence of 4-linked-a-~-galactose residues. For pectins,the ordered structure is interrupted by rhamnose,which introduces a “rhamnose kink” into the chain.
The familiar gelation properties of certain polysaccharides, such as pectin, agarose, and carrageenan (discussed in more detail in Chapter depend on the formation of a quaternary structure. In gels, the polymer molecules are aggregated into one immense, three-dimensional structure that “fills” the liquid. This continuous network gives a gel its unique rheological char-
Polysaccharide Molecular Structures
-
([I
.g a
20
30
60
70
temperature ("C) Change of optical rotation with temperature for K-carrageenan (2 gkg) with and without added potassium chloride (0.02 M). increasing temperature; A decreasing temperature; A no added salt.
acteristics, with both solidlike and liquidlike flow properties. This level of structure is best illustrated by looking at the aggregation behavior or three representative gel-forming polysaccharides: K-carrageenan-apolysaccharidewithcharged(sulfate) groups that forms helices Agarose-an unchanged polysaccharide that forms helices Alginate-a charged polysaccharide (carboxylate groups) that forms pleated sheets
A. Carrageenans As mentioned earlier, the carrageenans are sulfated polysaccharides containing essentially alternating copolymers of 19-linked P-D-galactose and 1,4linked 3,6-anhydro-a-~-galactose (Fig. 15). The linkage pattern introduces a twist into the molecule, giving rise to helical structures, as shown in Fig. 16. Gelation involves the formation of these double helices [lo]. (Singlestranded helices analogous to the protein a-helix are not stable.) Becauseof the ionic nature of the polymer, gelation is strongly influenced by the presence of electrolytes. The presence of a suitable cation, typically potassium or calcium, is an absolute requirement for gelation to proceed [ll].For both and K-carrageenan, the alkali metal ions pi', Na+, K+,Rb', CS') are all capable of inducing gelation, but K ' and Rb+ are considerably more effective than the other ions in inducing gelation at much lower concentrations of both the cation and the carrageenan [12-141. Anions also influence ge-
cturesMolecular Polysaccharide
33
lation [15], suggesting that at least part of the effect of these different salts is general and is mediated by the effects of different ions on the solvent properties of water. However, it is becoming increasingly clear that specific ion effects are also very important. Potassium ions, and possibly those of rubidium, because of theirsize, directly promote association of carrageenan chains.Other ions influence chain conformationandassociationthrough their effects on the solvent properties of water.
Like the carrageenans, this polysaccharide has a disaccharide repeat unit, in this case of alternating 1,3-linked p-D-galactopyranose and 1,4-linked 3,6anhydro-a-L-galactopyranose.Gelation occurs when hot agarose solutions are cooled to below about 40°C. The gels show a high thermal hysteresis, not melting until the temperature is above about 90”. As is the case for the carrageenans, gelation involves doublehelix formation [16].However, it seems that the agarose network involves much more than double helix formation. The high hysteresis, coupled with evidence from light-scattering, fluorescence depolarization studies and various other studies, suggests that junction zones are formed from substantial bundles of agarose chains [17].
Alginates have a more complex structure than the carrageenans and agar. They are, in effect, block copolymers consisting of a linear polyuronic acid backbone with three types of block structure-lY4-linked p-D-mannuronic acid(M), lY4-linkeda-L-guluronic acid (G),andmixedMG blocks containing both uronic acids [17]. Full characterization of the polymer would therefore require knowledge of the M/G ratio, the ratio of M, G, and MG blocks, the detailed composition of the MG blocks, and the length distributions and relative positions of the blocks. Divalent cations are required for gelation, and, unlike the carrageenans, the gels are not thermoreversible. The gel strength depends on the nature of the divalent cation with the order Ba2+>S?+>Ca2’>>Mg2‘. The junction zones probably have the “egg box” structure (Fig. 18) proposed by Grant andcoworkers [l81 based on evidence from circular dichroism and conformation studies. Linkage occurs via G blocks, since in experiments with isolated G, M, and MG segments, only G segments interact significantly with calcium ions, and this process is highly cooperative if the guluronate block exceeds about residues [17]. Guluronate sequences appear to associate into matched crystalline aggregates in a twofold ribbonlike form, with the ions cooperatively bound during the
.
,
.
18 The “egg-box” model for junction zones in gels alginate or lowmethoxyl pectin. The linkage geometry introduces a buckled sheet structure to the polysaccharide chains, andthe junction zones are stabilized by calcium ions The upper shows an approximation to the chelation a calcium ion by a single chain.
process, sitting inside the electonegative cavities like eggs in an egg box. However, more recent evidence seems to indicate dimeric association rather than the multiple aggregation suggested in the original model [19].
Polysaccharides have the deceptively simple (approximate) formula (C6H,,05)n, but they have the extraordinary ability of being able to form a vast range of structures. It is therefore not surprising that, after water, they are the commonest component ofliving things with numerous differentfunctions in the life process. These encompass functions ranging from cell recognition to that of being major structural components plants and insects (cellulose and chitin). Nature uses the ability of polysaccharides to form highly hydrated network structures (gels) in the synovial fluid of joints and the vitreous humor of the eye (hyaluronic acid). Polysaccharide structures are also of great importance in food science and nutrition as, increasingly, we turn our attention of food structure and texture. Polysaccharides as gelling agents and thickeners are essential in the development of food products low in fat and energy. Polysaccharides as dietary fiber are essential to good health becauseof structural characteristics that influence the flow behavior of the digesta [20,21].
1. Dictionary of Science and Technology. W. R. Chambers, London (1971). 2. Schulz, G. E., and Schirmer, R. H. Principles of Protein Structure. SpringerVerlag, New York (1979). Protein structure and enzyme 3. Linderstrom-Lang, K U.,and Schellman, J. activity. In: Boyer, P. D., ed., The Enzymes, Vol. 1, 2nd ed. Academic Press, New York, pp. 443-510 (1959). 4. Binkley, R.W. Modern Carbohydrate Chemistry. Marcel Dekker, New York (1988). and Smith, P. J. C. Polysaccharide conformation. Part IX. Monte 5. Rees, D. Carlo calculation of conformational energiesfor disaccharides and comparison with experiment. J. Chem. Soc. Perkin ZI: 836-840 (1975). 6. Moms, E. R. Polysaccharide structure and conformation in solutions and gels. In: Blanshard, J. M.V., and Mitchell, J. R.,eds., Polysaccharides in Food. Butterworths, London, pp. 15-31 (1979). Polysaccharide Shapes. Chapman and Hall, London (1977). 7. Rees, D. and Scott, W. E. Polysaccharide conformation. Part VI. Computer 8. Rees, D. model-building for linear and branched pyranoglycans. Correlations and biological function. Preliminary assessment of interresidue forces in aqueous lution. Further interpretationof optical rotation in terms of chain conformation. J. Chem. Soc. B: 469-479 (1971). Equilibrium and 9. Norton, I. T., Goodall, D. M., Moms, E. R., and Rees, D. dynamic studies of the disorder-order transitionof kappacarrageenan. J. Chem. Soc. Faraday Trans. 79: 2489-2500 (1983). 10. Rees, D. Structure conformation and mechanism in the formation of polysaccharide gels andnetworks. Adv.Carbohydr.Chem. Biochen 267-332 (1969). 11. Oakenfull, D., and Scott, A. The role of the cation in the gelation of kappacarrageenan. In: Phillips, G. O., Williams, P., and Wedlock, D. J., e&., G u m and Stabilizers for the Food Zndustry-5. IRL Press, Oxford, England, pp. 507-510 (1990). 12. Belton, P. S., Chilvers, G. R., Moms, V. J., and Tanner, S. F. Effects of Group I cations on the gelation of iota-carrageenan. Znt. J. Biol. MacromoE. 6 303308 (1984). 13. Watase, M., and Nishinari, K. Effect of alkali metal ions on the rheoIoaca1 properties of K-carrageenan and agarose gels. J. Tature Stud. 427z4.45 (1981). 14. Moms, V. J., and Chilvers, G. R. Rheological studies of specific cation forms of kappa-carrageenan gels. Carbohydrate Polym. 129-141 (1983). solutes on the 15. Rey, D. K., and Labuza, T. P. Characterization of the effect water-bindingand gel strength properties of carrageenan. J. Food Sci. 4 6 786-789 (1981). 16. Moms, E.R., and Norton, I. T. Polysaccharide aggregation in solutions and gels. In: Wyn-Jones, E., and Gormally, J., eds., Aggregation Process in Solution. Elsevier, New York, pp. 549-593 (1983).
Oakenfull, D. Gelationmechanisms, Food Ingredients J, Jpn. Grant, G. T.,Moms, E. R., Rees, D. Smith, P. J. C., and Thom, D. Biological interactions between polysaccharides and divalent cations:The egg-box model. FEBS Lett. 32: Moms, E. R., Rees, D. Thom, D., and Boyd, J. Chiroptical and stoichiometric evidence of a specific dimerization process in alginate gelation. Carbohydr. Res. Eastwood, M. and Moms, E. R. Physical properties ofdietaryfiber that influence physiological function: model for polymers along thegastrointestinal tract. Am. J. Clin. Nu& Oakenfull, D.Physical properties of dietary fiber. In: Samman, S., and Annison, G., eds., Dietaly Fiber Beyond Australian Perspectives. Nutrition Society of Australia Occasional Publications, Vol. pp.
3 Gel Formation andUltrastructure in Food Polysaccharides Tokuya Haradat and Akira Harada Osaka University Osaka, Japan
I. Food polysaccharides, dissolved, dispersed, or suspended in water, are generally classifiedas gelling or nongelling. The former class is ordinarily transformed to gels by heat and/or special solutions, e.g., by alkali neutralization and electrolyte additions, such treatments having the effect of initially decomposing mostly hydrogen bonds in the solid solute, followed by its solvation (hydration), dissolution, and reformation as a gel, upon the cooling or neutralizing of the sol. Gelation is a function of other variables, e.g., the degree of polymerization (DP), solute concentration, and cosolute additions; but for most gums, temperature is the most important variable. Changes promoted by heating can be followed by differential scanning calorimetry (DSC). A DSC of curdlan(Fig. 1) showed a sharp endothermic peak at 50-64"C7 possibly related to swelling and hydrogen-bond breakage; a broad endothermic peak between 70 and 120"C, and an exothermic peak in the range of 140-170°C. The swelling temperature decreased with increases in heating temperature. Heating (70-120°C) caused irreversible changes. Temperature hysteresis was observed between 60°C and 40°C. No exothermic peakatabout40°Cdeveloped on cooling after heating to 170°C. The strength of a gel depends on the temperature (Fig. 2). 'Deceased. In memory of Tokuya Harada.
Harada and Harada
38
20
40
72.5
137.5
105
Temperature
'C
Figure DSC curves of curdlan in aqueous suspension. Curve was obtained by heating an aqueous suspension of curdlan from 20°C 170°C. Curve B was obtained by cooling after heating the suspension to 90°C. (From Refs. 7, 32, 36, with permission.)
The development of ultrastructures in the sols of gelling polysaccharides is an important stage in the sol-gel transition. Those listed in Table 1 are curdlan, K-carrageenan, agar, pectin, alginic acid, konjac mannan, and gellan Curdlan is insoluble in water, but swells in it to form the two gel types [l-41.K-Carrageenan gels in the presence of Na+. We found that K-carrageenan/Na+remaineda gel after dialysis Agar develops a gel when its aqueous suspensions are heated to 90°C andabove and then cooled. High-methoxyl pectin gels with 65% sugar and acid; low-methoxyl pectin gels also with Ca2+but less sugar. Alginic acid gels with C a 2 + and no sugar. Gellan gum requires heating to no less than 90°C in the presence of Caz+, preceding cooling to about 30°C. Konjac glucomannan gels by heating and cooling and by neutralizing an alkaline sol. Screloglucan, xanthan, dextran, pullulan, A-carrageenan, locust bean, and succinoglycanare nongelling poly-
-
h
<
-
-5
M $ .
VI
500 -
IP
ot
50
I
70 80 Heating temperature
l
90
100
Effect of heating temperature on gel strength of curdlan. Heating time, min; concentration curdlan, 3%. (From Ref. 33, with permission,)
saccharides that nevertheless develop very weak structures, contributing to a high viscosity. The neutralization of some polysaccharide sols, e.g., curdlan leads to gelation. We examined the effect of alkalization on konjac glucomannan, curdlan, agar, and K- and L-carrageenan gels (Table 2) and discovered that konjac glucomannan gelled on neutralization of its alkaline solution but not on heating at neutrality. The strengths of the gels obtained by neutralization alone were much lower than those of the gels obtained by heating, except in the case of konjac glucomannan. The concentration NaOH required for solubilizationofagar,K-carrageenan;and konjac glucomannan was higher than the 0.02 N required for curdlan, although the latter's xerogel powder did requirea concentration of 1.0 N and heating at 90°C [6]. A very high NaOH concentration was required to solubilize agar. The order of gel strengths of those gels induced by heating and cooling was agar > K-carrageenan > curdlan > konjac glucomannan/Ca2+> L-carrageenan; for those inducedby alkali neutralization,K-carrageenan > konjac glucomannan > curdlan > konjac glucomannan/Ca*+agar.
Harada and Harada
3 'F W
8
Bn
W
h
P
W
Harada and Harada
We examined the X-ray diffraction patterns of powders of curdlan dehydrated with acetoneafter heating atvarious temperatures Figure shows the X-ray diffraction patterns of both the alkali-labile fraction of powdered preparations of the gel formed on neutralization andthe alkali-resistant fraction. The peak at about 2 = became sharper with increases in temperature, especially above 120°C: 3-5 peaks between 15 and 25" appeared at
3 Micrographs of gel-formingpolysaccharides. A, C, E, G, and I: gels heatedat 95°C for min in aqueous suspension, B, D, F, H, and J: gels formed by neutralization an alkaline solution.A and B, curdlan; C and D, agar; E and F, K-carrageenan; G and H, konjac glucomannan; I, konjac glucomannan with calcium chloride; J, L-carrageenan. Bars represent m.(From Ref. 6, with permission.)
Harada
and
Harada
3 Continued
80°C and higher, which may have been due to the formation of triple helices followed by hydrophobic interaction, judging from comparison with previously reported X-ray data [8-111 and 13CNMR data (Saito et al.) [12]. Ogawa et al. [l31 proposed that dilute NaOH solution induces an ordered conformation in curdlan, and high concentrations (0.2 cause it to behave as a random coil. This order-disorder transition in alkali was confirmed by Saito et al. [14], who later reported about 10% of an untreated curdlan powder in triple helical conformation to be involved incrosslinking with flexible single helices. The proportion of the triple helices increased to about 50% on heating the gel to 150°C and then to 100% on slow cooling. Native curdlan was observed to exist as a 6:l random coil in the dry state, but as a single helix in a dispersion of 85% moisture, after alkali neutralization [lo]. Takeda et al. [8] claimed that the single helices convert totriple helices upon neutralizationas well as heating. The existence of triple helices in curdlan gels was proved by X-raycrystallography [9,10,15-171. Thus the effect of alkali on a heated and cooled curdlan sol is largely a single-totriple helix conformation. A curdlan gel was immersed in 32% H2S04, and after reheating at 32°C a stable residue remained that was resistant to the usual p-1,3 glucanases [l81 but thatwas hydrolyzed bythe enzymes of Bacillus curdlanolyticus and Bacillus kobensis [19,20].
While helical conformations may be a prerequisite for gelation [21], singleand double-stranded fibrils were also seen in xanthan [22,23]. Stokke et al. [23] showed this gum to exist as single- and double-stranded fibers 2 m and nm wide,respectively. Inasmuch as nongelling schizophyllan and scleroglucan are known to exist as triple helices in water [24], conditions additional to those creating helices are necessary. The possibility of microfibrillar differences between nongelling and gelling polysaccharidesunder conditions normallyexpectedto induce a to examine photomicrographs of samples from both phase change led classes (Figs. There were differences. The nongelling polysaccharides
Micrographs of mucous polysaccharides (sols): A-carrageenan (A), screloglucan (B), succinoglycan (C), xanthan gum (D), pullulan (E), anddextran (F). (From Ref. 6, with permission.)
Harada and Harada
Figure Micrographs of dialyzed K-carrageenan and its derived preparations. Dialyzed K-carrageenan H-form (B), Na-form (C), Na-form with potassium chloride (D). (From Ref. 34, with permission.)
yielding viscous fluids contained microfibrils 1-2 nm wide, and the gels, 5-25 nm wide. Previously we reported that curdlan gave about 25 nm in a 120°C-set gel and 15 nm in a neutral gel [B]. Agar andK-carrageenan showing 7- and 8-nm widths, respectively, were similar in the heated and neutralized gels. Interestingly, the gelling K- and L-carrageenan showed microfibrils approximating 8-nm and 5-nm widths, respectively, whereas the nongelling X-carrageenan approximated 1.5-nm widths. The neutralized gel of konjac glucomannan had long, wide microfibrils, whereas heated Ca2+/ konjac-glucomannan contained none, only globules. The microfibrils ofsuccinoglycan and xanthan gum were wider, compared with those of other viscous polysaccharides, apparently depending on whether or not the solution contains single, double, triple, or multiple helices and branches. Triple helices from the curdlan H,SO,-, P-1,3-glucanase-resistant, 120°C gel were 75 nm long and 30 nm wide (Fig. 9). Heating at55°C released many considerably thinner elementary microfibrils 1-3 nm wide (Fig. 10). Implicit in Fig. 10, and throughout this chapter, is the inference that dissociation and association of helical conformations are solation-gelation phenomena.
Gel Formation and Ultrastructure
Figure Micrographs of Na-form alginate (A), Na-form gellan gum (B,Bf), and Na-form low-methoxyl pectin(c)with calcium ion (2) and without calcium ion (l), obtained by negative staining (A, B, C) or shadowing (Bf). Bars represent 100 nm. (From Ref. 34, with permission.)
Harada
Harada
Micrographs of locust bean gum alone (A) and with K-carrageenan and potassium chloride (B)or xanthan gum (C,D), obtained by negative staining. C, formed by cooling the heated mixture; D, formed by dialyzing a solution in dimethyl sulfoxide. Bars represent nm. (From Ref. 31,with permission.)
In the example of curdlan, gelation is effected by a DP 2 (Fig. 9). Judging from its electron micrographs (Fig.lo), this gum is self-ordering as microfibrils. Unheated DP-450 curdlan showed elementary fibrils about 100 nm long, those of DP-131 curdlan about 40-nm long, andthose of DP49 curdlan about 25 nm long. The microfibrils of the DP-49 curdlan were
Dependence of the specific rotation of curdlan at 439 nm on the degree of polymerization in 0.1 M sodium hydroxide at 30°C. (0) gel-fonning polymer; insoluble fractions; soluble fractions. (From Ref. 35,with permission.)
ructureandGel Formation
49
Figure Electron micrographs of the original curdlan @P B) and lowmolecular-mass (1-3)-p-D-glucanS DP 131 (C,D) and DP (E,F)before (A, C, E) heating at 120°C for 30 minand after heating (B, D, F). (From Ref. 7, with permission.)
parallel. Heated DP-131 and -49 curdlan gave 40-50 nm lengths of what could be argued to be pseudocrystalline structures It is also arguable that the DP-131 and DP-450 curdlan primary structures may have resulted in shorter microfibrils than those of DP-49 curdlan containing more than 50% fewer monomers, because of entanglement. When peptization of the polysaccharide solutes was effected by dimethyl sulfoxide, urea, or formic acid, instead of by NaOH, and the sols dialyzed, they have gels similar to the gels obtained from alkali neutralization.
Harada and Harada
X-raydiffractionpatterns of curdlanpowderwith and withoutresistance to acid hydrolysis. Neutralized preparation (A); part resistant (B) to acid hydrolysis in the preparation heated at 120°C for 4 h. (From Ref. 18, with permission.)
K' causes aggregation ofK-carrageenan molecules into superstrands and enhances the gel strength [26]. Stokke and Elgsaeter [27] observed much wider gellan microfibrils in 0.1 M KC1 than without. Thus, the gel-forming ability of K-carrageenan differs with the cation present. We studied gelation in the presence of certain cations (Table 3), using a shadowing technique insteadof negative staining withuranylacetate, which would have complicated the electron microscopy of the polyanions [26].We dialyzed a K-carrageenan gel against distilled water and noticed a marked lowering of gel strength, to the stage where it was unable to gel when heated; subsequentlyadding K+ caused the initial gel strength to return
Gel Formation and Ultrastructure
11 Micrographs of gels treated with 32% sulfuric acid at 32°C for 30 days after heating at 120°C for 4 h in water Micrographs of curdlan gels sonicated (B) after neutralization of the solution in 0.3 N NaOH with HC1 and then heated at 55°C (C).Bars represent nm. (From Ref. 2,with permission.)
to its initial value, and enhanced it, after the concentration required to neutralize the polyanions was exceeded. Next, on a suitable Amberlite IR-120 resin, we converted the dialyzed sol to each of the H+-,K+-, and Na+-forms, and discovered that the gel made therefrom had the same low gel strength. The dialyzate and its H- and Na-forms showed similarly short, narrow microfibrils,but the addition of K' to the Na-form gave long microfibrils, suggesting that K' increased the length of the Na-form microfibrils in carrageenan gels (Fig.
Harada 52 Table
and Gel Formation Dependent on the Presence
Harada Certain Cations Gel strength (g/cm')
K-Carrageenan K-Carrageenan plus KC1 (0.5%) Alginate (1%) %) aClz plus (1%) Alginate Gellan gum Gellan (0.2%) CaCl, plus (0.005%) pectin Low-methoxyl (2%) Low-methoxyl CaCl, (0.4%) pectin plus (2%)
140 2300
500 420
'No gel was formed. Source: Ref. 34, with permission.
The effect of Ca" on the Na+ forms of alginate [21], gellan [28], and low methoxyl pectin gels [29] was examined, only to find much longer microfibrils in the presence of C a z + than in its absence; the gellan microfibrils were about nm wide with Ca2+and about 5 nm wide without (Fig.
The strength. ofK-carrageenan/K+ gels is known to be enhanced by the addition of nongelling locust bean gum [21], which, moreover,is also known to form a gel with other nongelling gums, e.g., xanthan gum [30]. These synergistic pairs have similar glycoside linkages (Table It is the unsubstituted regions in the primary structure that are implicated in associative bonding (junction-zone formation). Again by electron microscopy,weexaminedpairedpolysaccharide Locust bean gum alone showed microgels for synergism (Table Fig. fibrils of less than l-nm width, and the mixed locust beangum/K-carrageenan gel revealed irregular rodlike microfibrils of 20-30-nm width. The locust bean and xanthan sols, heated separately at 95°C for min, mixed, and then cooled, showed many globularforms of various sizes (Fig. 7C).A dialyzed locust beadxanthan sol in dimethylsulfoxidegave fibers 20-30 nm these latter forms were similar to those from mixtures wide (Fig. locust bean gum and K-carrageenan with K+.
The way the microfibrils develop in a gel can have a significant impact on syneresis. It was shown that the 95°C-set curdlan gel was more syneretic
mation
Gel Table
Gel Formation by the Synergistic Actions of Ttvo Polysaccharides Gel strength
(g/cm’> Locust xanthan (1.5%) Locust gum plus bean gum Locustbeangum(1.5%)plusK-Carrageenan K-Carrageenan KC1 (0.5%)plus (0.5%) Source: Ref.
0
(0.5%) (0.5) andKCl(1.5%)
140 30
permission.
than the gel developed from alkali neutralization, a difference ascribed to the different gelation mechanisms [31].
VII. Generally, an aqueous solution of a nongelling polysaccharide contains narrower microfibrils than those of a gelling polysaccharide. Curdlan gels, unheated or originating from neutralization of alkaline sols, consist principally of single helices, whereas heated curdlan gels consist largely of triple helices. Curdlan pseudocrystallitesdevelop in sols as a result of heating to high temperatures. Arguably, therefore, under gelation conditions relatively short microfibrillar subunits associated in the axial direction, and normal to it, to produce microfibrillar lengths to nm and widths to nm; the evidence has been derived from examination of curdlan suprastructures by electron microscopy. It could be argued that these associating microfibrils accelerate gelation, because they are less mobile than single microfibrils. An aqueous nongelling polysaccharide has been illustrated on electron micrographs to contain narrower microfibrils than a gelling polysaccharide.
1. Harada,T.,Terasaki, M.,andHarada,A.In:Whistler, R. L., ed., Curdlan in “Industrial ” 3rd ed. Academic Press, New York, p. 427 (1993). 2. Harada, T., Kanzawa, Y., Kanenaga, K., Koreeda, A., and Harada, A. Electron
microscopic studies on the ultrastructure of curdlan and other polysaccharides in gels used in foods. Food Structures. 10: 1 (1991). 3. Harada, T., Production, properties and application of curdlan. In: P.A. Sandford, andLaskin, A., eds.Extracellular Microbial Polysaccharides.M C Symp. Ser. 265-283 (1977).
Harada
and
Harada
Harada, T., Curdlan: A gel-forming p-1,3-glucan. In: Blanshard, J. M. V., and Mitchell, J. R.,eds., Polysaccharides in Food. Butterworths, London (1979). 5. Kanzawa, Y., Takahashi, F., Harada, T., and Harada, A. Ability curdlan gel 38: 363 (1987).In toholdhydrophobic substance. Kasei-gakuZasshi. Japanese. 6. Kanzawa, Y., Koreeda, A., Harada, T., and Harada, Electron microscopy of the gel-forming ability of polysaccharide in food additives. Agric. Biol. Chem. 53: 979 (1989). 7. Harada, T., Okuyama, K., Konno, A., Koreeda, A., and Harada, A. Effect of heating on formation of curdlan gels. Carbohydr. Polym. 24: 10 (1994). 8. Takeda, T., Yasuoka, N., Kasai, N., and Harada, T. X-ray structure studies of (1-3)-P-~-glucan(curdlan). Polym. J. 10: 365 (1978). 9. Fulton, W. S., and Atkins, E. D.T. The gelling mechanism and relationship to molecular structure of microbial polysaccharide curdlan. In “Fiber Diffraction Methods, French, A. D., and Gardner, F., eds., ACS Symp. Ser. 141, 385-410 (1980). 10. Chuah, T., Sarko,A.,Deslandes, Y., andMarchessault, R. H. Triple helical crystal curdlan and paramylon hydrates. Macromolecules. 1 6 1375 (1983). 11. Okuyama, K., Otsubo, A., Fukazawa, Y., Ozawa, Y., Harada, T., and Kasai, N. Sin of native curdlan. Carbohydr. Chem. 10: 645 (1991). 12. Saito, H., Yoshioka, Y., Yokoi, M., and Yamada, J. Distinct gelation mechanism between linear and branched (1-3)-p-D-glUCanS as revealed by high-resolution solid-state 13CNMR. Biopolymers. 19: 1689 (1991). 13. Ogawa, K, Tsurugi, J., Watanabe, T., and Ono, S. Conformational behavior of gel-forming (1-3)-P-D-glUCan in alkaline solution. Carbohydr.Res. 23: 399 (1972). 14. Saito, H., Ohki, T., and Sasaki, T. A nuclearmagneticresonanceof single helical conformation in a resilient gel of a curdlan-type polysaccharide 13140 from Alcaligenes faecalis var. myxogenes I F 0 13140. Biochemistry 16: 908 (1977). 15. Marchessault, R. H., Deslandes, Y., Ogawa,K.,and Sundarajan, P. R. X-ray diffraction data on p-(l-3)-~-glucan. Can. J. Chein. 25: 300 (1977). 16. Sarko, A., Wu, H. C., and Chuah, C. T. Multiple-helical glucans. Biochem. Soc. Transact. 11: 139 (1983). 17.Deslandes, Y., Marchessault, R, H., andSarko,A. Triple-helical structure of (1-3)-P-~-glucan.Macromolecules 13: 1466 (1980). 18. Kanzawa, Y., Harada, T., Koreeda, A., Harada, A., and Okuyama, K. Difference of molecular association in two types of curdlan gel. Carbohydr. Polym. 1 0 299 (1984). 19. Kanzawa, Y., Kurasawa, T., Kanegae, Y., Harada, and Harada, T. Purification and properties a newexo-(l-3)-P-~-glucanase from Bacillus circulans YK9 capable of hydrolyzing resistant curdlan with formationof only laminarbiosse. Microbiology 140: 637 (1994). 20. Kanzawa, Y., Harada, A., Takeuchi, M.,Yokota, A., and Harada, T. Bacillus curdlanolyticus sp. nov. and Bacillus kobensis sp. nov., which hydrolyze resistant curdlan. Int. J. System. Bacteriol. 45: 515 (1995). 4.
mation
Gel
55
Rees, D. A. Shapely polysaccharides. Biochem J. 126 Holzworth, G., and Presridge, E. B. Multistranded helix in xanthan polysaccharide. Science 19: Stokke, B. T., Smidsrod, O., and Elgsaester, Electron microscopy of native xanthan and xanthan exposed to low ionic strength. Biopolymers 28: Norisue, T., Yanaki, T., and Fujita, H. Triple helix of a Schizophyllum commune polysaccharide in aqueous solution. J. Polym. Sci., Part D. Macromol. Rev.18: Takahashi, F., Harada, T., Koreeda, A., and Harada, A. Structure of curdlan that is resistant to P-1,3-glucanase. Carbohydr. Polym. Hermansson, A. M. Rheological and microstructural evidence for transient states during gelation of kappa-carrageenan in the presence of potassium ion. Carbohydr. Polym. 10: Stokke, B. T., and Elgsaester, A. Conformation, order-disorder conformational transitions and gelation of non-crystalline polysaccharides studied using electron microscopy. Micron. 25: Grasdalen, H., and Smidsrod, 0. Gelation of gellan gum. Carbohydr. Polym. and Rooks, J. K Algin gel compositions, U.S. Patent In Chem. Abstr. Dea, I. C. M., and Moms, E. R. Synergistic xanthan gels. In: Sandford, P. A. and Laskin, A., eds., Exocellular Microbial Polysaccharides. ACS Symp. Ser. Miller,
45:
Kanzawa, Y., Harada, T., Koreeda, A., and Harada, T. Curdlan gel formed by neutralizing its alkaline solution. Agric. Biol. Chem. 51: Konno, A., Oluyama, K., Koreeda, A., Harada, A., Kanzawa, Y., and Harada, T. Molecular association and dissociation in formation of curdlan gels.In: Nishinari, K., and Doi, E., eds., Food Hydrocolloids: Structure,Properties and Functions. Plenum Press, New York, pp. Maeda, Y., Saito, H., Masada, M., Misaki, A., and Harada, T. Properties of gels formed by heat treatment of curdlan, a bacterial glucan Agric. Bid. Chem. 31: Kanzawa, Y., Koreeda, Y., Harada, A., Okuyama, K., and Harada, T. Significance of molecular association for polysaccharide gels in food. J. Home Econ. Jpn. 41: Ogawa, K., Tkurugi, J., and Watanabe, T. The dependence of the conformation of a (1-3)-p-D-@UCan on chain-length in alkaline solution. Carbohydr. Res. 29: K o ~ oA., , and Harada,T. Thermal properties of curdlan in aqueous suspension and curdlan gel. Food Hydrocolloids 5:
This Page Intentionally Left Blank
4 Structures and Phase Transitions of Starch Polymers G. Biliaderis Aristotle University Thessaloniki, Greece
INTRODUCTION In addition to being a major component of the human diet, starch constitutes an excellent raw material for modifying the texture and the consistency of foods because of its ability to form viscoelastic pastes or gels when heated in water. Furthermore, starch-derivedproducts have long served in numerous nonfood applications, such as pharmaceuticals, textiles, alcohol-basedfuels, and adhesives. New uses of starch are steadily emerging, including lowcalorie fat substitutes, “biodegradable” packaging materials, thin films, and thermoplastic materials with improved thermal and mechanical properties. Many of these food and industrial applications starch rely largely on the colloidal properties of its two structurally distinct a-D-glucan components, amylose and amylopectin. Starches from various plant origins exhibit characteristic functional properties, dependingon a number of integratedfactors that include polymer composition, molecular structure, interchain organization, and minor constituents (e.g., lipids, proteins, and phosphateester groups). Moreover, chemical, enzymic, and physical modificationof starch structure, with either preservation or destruction of the native granular form, offer alternative routes of imparting certain functionality for this biopolymer. Starch modification is a common feature many processed foods, having both textural and nutritional implications. Recent advances in the physical chemistry and structure of starch also reveal many similarities with synthetic semicrystalline
Biliaderis
polymers [l-41.Despite the inherent difficulty in providing a complete description of starch morphology in terms of size, shape, amount, and orientation of ordered chain assemblies, as well as the exact nature of the amorphous domains, there is a growing recognition of the relationship between internal structure (molecular and supermolecular) and macroscopic properties of starch. Information derived withthe use of sensitive analytical probes of polymer structure (e.g., calorimetry, dynamic mechanical testing, electron andneutron scattering, andX-raydiffraction, electron microscopy, solidstate I3C-NMR, Fourier transform infrared spectroscopy) provides evidence for various levels of chain organization, not only withinthe granule but also in aging aqueous starch dispersions andprocessed foods. Such measurements further point to the nonequilibrium natureof starch structures (various metastable states) and the need to treat the processes of gelatinization, annealing,gelation,andretrogradation of starch in the context of solventmediated structural transitions of polymers. In the following discussion some aspects of starch structure are considered,particularly as theypertainto the function, physicalproperties, metastability, and transformations of this polysaccharide in model systems andin actual food products. The phase-transition behavior of starch and related materials is examined by drawing attention to the interactions of starch with water, lipids, low-molecular-weight solutes (salts and sugars), and other hydrocolloids. These properties are relevant to processing and enduse quality of starch-based materials.
II. It has long been recognized that starch materials differ in composition, structure, and supermolecular order of the polysaccharide constituents, which could account for differences in their functionality. Native starch occurs in the form of discretegranularparticlesthat are partiallycrystallineandbirefringent when viewed under polarized light.The cold water-insoluble granules, found in practically every plant tissue, represent an efficient means ofstoring energy, for the a-D-glucan molecules are densely packed into quasicrystalline aggregates following their biosynthesis in the amyloplasts. The granule structural organization also imposes some constraints on the action of a-amylases, resulting in a slow release of glucose upon mobilization of reserve starch in plant tissues and during the in vivo digestionof native starch, particularlyof tuber starches (banana, potato), in the human small intestine. The size, distribution, shape, and morphology of starch granules are e.g., cereal starches are markedly dependent on the botanical source
generally small and polyhedric, whereas tuber starches are large and ellipsoid or spherical. Some cereal starches (e.g., amaranth, cow cockle) have uniform, very small granules (0.5-2.0 p), whereas those of canna starch have diameters up to 175 p. An extensive study of the morphological features and shapes of starch granules from different botanical sources using scanning electron microscopy was recently presented [lo]. Contrary to most starches, whichshow single size distribution of granules, wheat, rye, barley, and triticale starches exhibit bimodal distributions (sphericalB-granules, 1-10 p, and lenticular A-granules, 15-35 p). In wheat, B-starch constitutes about 25-30% of the total starch volume but about 90% of starch granules in number. A low baking potential has been noted for small granules [ll]. The proportion of small granules is also important for the baking performance of wheat flours. The specific volume of loaves prepared by remixing A- and B-type granules in various ratios was maximum whenthe proportion of the small granules was 25-35% by weight [12]. Granule size and morphology have recently received much attention, because small granular starches are useful in determining taste and mouth feel of some starch-based fat mimetics [13,14], tensile properties of biodegradable plastic films [15], and surface-coating properties in paper production processes [9] and as laundry-stiffening agents. Besides the exploitation of novel raw materials, which requires the development of efficient wetmilling processes to produce small-granule starches, methods have been developed to break down granules of cereal starches into small particles by heterogeneous acid hydrolysis [16,17]. Hydrolysis is conducted at temperatures between 55°C and the gelatinization temperature of starch. The acidresistant residues consist of aggregated starch crystallites, which upon homogenization in a continuous water phase give a stable suspension with a smooth, creamy, fatlike mouth feel. Granule composition,morphology,andsupermolecularorganization are, to a certain degree, under genetic control [7,18]. The exact mechanism by which plant genetic information is translated into specific granule compositionandorganization is obscure.Granule-bound starch synthases are linkages of amylopectin. The ~ ( 1 - 6 ) branch responsible for points are formed by branching enzymes in a transferase reaction involving no new synthesis. However, the exact role and the in vivo regulation of the multiple forms of starch biosynthetic enzymes (phosphorylase, starch synthases, branching enzymes) are not fully understood [19-221. Only when this information is available might it be possible to manipulate the quantity and fine structure of starch. Plantbiotechnology offers newmolecularapproaches to modulate starch quality and quantity [23].A major breakthroughwith respect to starch composition has been the inactivation of granule-bound starch synthase in
potato tubers using antisense RNA mediated inhibition; starch of the transgenic plants had very low amylose content ( ~ 5 % [23]. ) It would appear that selective inactivation of genes encoding certain isoforms of starch synthases or branching enzymes may lead to starch polymers with altered molecular size and shape or different branching patterns. In addition to being able to modify the biosynthesis routes by controlling expression of endogenous genes in transgenic plants, genetic engineering may offer answersto more fundamental questions concerning the in vivo role of starch synthesis enzymes. For example, Muller-Rober et al. [24] were able to create potato plants in which expression of ADP-glucose pyrophosphorylase (AGPase) was inhibited via antisense RNA. This resulted in abolition of starch formationintubers, thus strongly favoring theADPglucose route as a predominant pathwayfor starch synthesis in higher plants. Production of novel starches in transgenic plants offers new possibilities to replace much of the postharvest chemical modifications, which are environmentally hazardous, expensive, and time-consuming. It may become possible biotechnologically to synthesize anionic starches containing carefully controlled levels of phosphate or sulfate groups to render certain functionality. For fat-replacement applications,the insertion of new typesof glycosyl linkages, e.g., ~ ( 1 - 2 ) or a-(1+3), would be useful for improving resistance to breakdown in the digestive tract or for other desired functions.
A.
Starch Macromolecules: Structure, Solution Conformation, and Properties
Starch granules are composed essentially of amylose and amylopectin, as evidenced by dispersion of the granular material and separation of these polymeric constituents [7]; i.e.,inmolecular terms granules are polymer composites. As is the case for most polysaccharides, amylose and amylopectin are heterogeneous, exhibiting a wide distribution of molecular structures and sizes. Most starches contain between 20% and35% amylose. However,plant breeders havedeveloped mutants that contain starch with essentially no amylose (waxy type) or of much higher amylose content (e.g., amylomaize with 50-85% amylose). Starch owes much of its functionality to the fine structure and relative proportion of these polysaccharidesas well as to the physical organization of starch polymers into larger structural domains in the solid state. However, the minor noncarbohydrate components of granular starches (less than 1.5%), and particularly lipids, proteins, and phosphorus, maywell be of significance in determining the processing quality and functional properties of commercially important starches [25,26].
Starch
1. Amylose consists mainly of ol-(l+4)-linked D-glucopyranosyl residues, thus often referred to as the linear starch fraction. However, it is now accepted that this polymer is slightly branched, having occasional a-(1+6) branch points; according to Hizukuri et al. [27] there are 9-20 branch points per moleculeand the side chains range in chain length from 4 to over 100 glucosyl units. The extent of branching depends on the origin of amylose [28] and increases with the molecular size of amylose from a particular source [7,29]. The extent of branching is reflected in the susceptibility of amylose to hydrolysis by the exoenzymeP-amylase;P-amylolysis varies between 73% and 95%, depending on the extraction procedure and the botanical origin of amylose [7,30]. When amylose is subjected to the concurrent action of pullulanase and P-amylase, conversion to maltose is essentially quantitative (97-100%) [31]. For laboratory-isolated amyloses,the reported range of M, varies between 2.0 X lo5 and 1.2 X lo6, with polydispersity indices (M,.,/M,) between 1.3 and 5.8 [7,30,32,33]. Despite its slight branching, amylose behaves essentially like a linear polymer, forming films and complexes with ligands. amylose has long been the subject of The solution conformation extensive research [7] and is still a matter of controversy. Early investigations of the hydrodynamic properties of amylose solutions (viscosity and light-scattering measurements) indicated that the conformation of anylose depends on the solvent employed. According toBanksandGreenwood [7,34], in neutral solutions as well as in good solvents (DMSO, formamide, and aqueous alkali), amylose behaves like a random coil, whereas a helical conformation is assumed in neutral or alkaline solutions in the presence of a complexing agent. Polymer chain stiffness in solution can be expressed by the dimensionless quantity C,, known as characteristicratio (C, = 6(Rg'),,,/(n)Z:,where @g'), is ,, the weight-average mean-square radius of gyration, (n) is the number of residues, and Z, is the average projection length a monomer on the chain axis), and by the persistence length, 4,defined as the average projection an infinitely long chain on the initial tangent of the chain. Estimates of these parameters for amylose (C, 5-6, 4 = 1.51.7 nm) [7,35,36] suggest that amylose chains in aqueous KOH (0.1 M) or KCL (0.1-0.3 M) solutions are more flexible than cellulose derivatives (C, 30-40, 4 4.6-16.0 nm), pectin (4 30-34 nm), and xanthan (4 255 m),but more rigid than pullulan (4 1.2-1.9 nm) [37]. Also, the C, of amylose in DMSO is -5 1 nm [38], close to the reported values for aqueousamylose [7,35,36,39]; i.e., for high-molecular-weight amylose (>los), the conformations in water and DMSO are essentially the same. The overall random-coil conformation of amylose in solution does not preclude
some local helical character in some segments of the chain. This is supported by small-angle X-ray scattering data [40]. Thus, the average conformation of amylose in aqueous solution may be viewed as a highly disordered coil involving many discernible sequences of short-range helical structures that are irregular and labile. The extent and direction of local conformational order change dynamically in solution, resulting in a sequence of conformational states that determine the macroscopic properties of amylose. There are two features of amylose in solution that are of special interest to the functionality of this polysaccharide in starch-based products.The first is the ability to form helical inclusion complexes when an appropriate ligand is present. The formation of a complex between amylose and iodine gives rise to the typical deep blue color (Amm = 640 m)of starch dispersions stained with iodine and forms the basis for quantitative assessment of amylose;in IJKI solution, the guestmolecules are polyiodideions,mostly I; or I; 171. By amperometric or potentiometric titration, the stoichiometry of the complexation gives a binding capacity of amylose some 20% of its own weight of iodine, whereas amylopectin binds none. Besides iodine, a variety of polar and nonpolar compounds induce coil helix transitions in an aqueous amylose solution. It is the ability of these materials to satisfy nm in the solvation requirements of the hydrophobic helical cavity (ca. diameter) that enables the polysaccharide chain to adopt a regular conformation (V-helix), where the ligand molecule resideswithin the helix [7].The interactions that stabilize the helix are intrachain hydrogen bonds between 0-3(2), interturn H-bonds adjacent glucosyl residues, 0-2 and numerous intra- and intermolecular van der Waals contacts [41,42]. Computermodeling of a fatty acid dockedinside a Vh-helixsuggests that only the H-5 atoms of each glucopyranose residue participate in short van der Waals contacts with the nearest CH, group of the aliphatic chain [43]. W Ostable conformations of the total fatty acid residue were determined with the polar group located near the entrance of the helix cavity. Steric and electrostatic repulsions prohibit the polar groups of fatty acids and monoacylglycerides from entering the helix [43,44]. The second feature of interest with respect to the solution behavior of amylose is related to its propensity to interchain associations mediated by local ordering of the polysaccharide chains; i.e., interchain double helix formation occurs over chain segments of less than 100 units. Thus, amylose solutions are not very stable, compared to amylopectin. of the most important variables that affect the solubility, molecular association, and/or crystallization of amylose are polymer concentration and chain length [45471. Amylose tends to precipitate (retrograde) in dilute solutions at concentrations CC* (critical or coil overlap concentration) or form gels in concentrated solutions. The instability is more marked for molecules of DP (degree
-
-
of polymerization) -80 units; smaller and larger molecules appear to be more stable [45,48]. The solubility also shows similar trends, with amyloses of DP 80-100 being very sparingly soluble, and solubility increasing in the direction of shorter and longer chains [48]. For nearly monodisperse amyloses, it was found that precipitation (and not gelation) occurred for DP < 110 at all concentrations up to 5% wlv, whereas gelation occurred for amyloses of DP > 250 at concentrations >1.0% wlv [47]. Precipitates of shortchain amylose are essentially fully double helical and crystalline (side-byside stacked helices), while the structure of amylose gels is generally rationalized as a continuous network of rigid doublehelical crosslinks, acting as junction zones, interconnected by more mobile amorphous single chain segments. Strong evidence for chain aggregation of amylose, even in dilute (0.1% w/v) solutions, is provided by static light-scatteringexperiments; such behavior gives rise to high-molar-mass estimates for the linear starch fraction [49,50].
2. Amylopectin with a M,., of the order of 107-109 [7,50] is one of the largest known naturally occurring polymers. Its fine structure has been the subject of extensive investigations for over 50 years. Early methylation and periodate oxidation studies indicated that amylopectin possesses some 4-5% of interchain linkages, a-(1+6), leading to a highly branched, compact structure. Because of their branched nature, amylopectins have relatively low intrinsic viscosities (120-200 mL-g”) despite their high molecular weight [7]. While the average size of the unit chains is 20-25 [51,52], the amylopectin molecule contains several distributions of chains differing in their chainlength[52,53]. There are A-chains, which are unbranchedandare linked to the molecule through their reducing end-group; B-chains (B1-B4), which are joined to the molecule in the same way but carry one or more Achains; and one C-chain, which has the reducing end-group of the molecule (Fig. 1). The shortest chains (A and B,) have a chain length (CL) of 1418; the longer ones @-B.,) have a CL of 45-55. The molar ratio of short to long chains varies between 3:l and12:1, depending on the botanical origin of the starch [51]. Cereal starches generally have shorter chains in both long- and short-chain fractions and larger amounts of the short-chain fractions, compared with those of tuber starches [51,52]. Various enzymic methods for structural analysis of amylopectin have been devised [7,54-57, 57al. The polymodal chain distributionin amylopectins, as revealed by chromatography of their enzymic digests using debranching enzymes as well as other relevant structural analysis data on acid-resistant amylodextrins [58621, is consistent with the cluster-type model of French [58] and Robin et
70
100 Retention time (min)
4
"_
110
+
3
"_
er
1 Chain distribution profile (waxyrice starch) and model for amylopectin structure according to Hizukuri. (Reprinted with permission from Ref. 52.)
Starch
al. [59]. The general features of these models are that amylopectin is composed of compact parts of oriented chains (crystalline clusters) andthat branching points are not randomly distributed throughout the macromolecule. While the constituent chains are drawn for simplicity as straight lines in Fig. 1, they in fact exist as double helices in the native state or in aged starch gels. Conformational analysis and molecular modeling of the branching point of amylopectin revealed thatside chains can remain parallelto the main backbone strand, allowing formation of double helices and the development of dense three-dimensional structures during deposition of the growing polymer in the amyloplast [63]. Such molecules may have a diameter of about 100 and a length of several thousand [18,59,64]. The clustertype structural model provides the basis for explaining why amylopectin is the dominant partially crystalline polymer (alternating crystalline arrays of double-stranded helices and amorphous zones of dense branching and cluster interconnecting long-chain segments) for most granularstarches. Amylopectins, particularly those from root and tuber starches,contain phosphate ester groups, mainly at C6 and C3, which confer on the macromolecule the properties of a polyelectrolyte [7]; e.g., for potato starch, the total phosphorus (-1 phosphate ester/200-500 anhydroglucose units, AGUs) is practically associated with the amylopectin fraction, with the C6-phosphate/C3-phosphate at aratio of ca. 2/1 [65]. The biosynthetic route of the phosphorylation is not yet fully known, but it is an integrated part of starch synthesis [66]. Physical and biochemical methods indicate that theC3 phosphorylation level is almost constant, whereas phosphorylation at C6 varies among different potato varieties [67,68]. The C6 phosphates seem to interfere with the tallization of amylopectin during starch synthesis; i.e., crystallinity and enthalpy of gelatinization decrease with the level of C6 phosphorylation but not with the level of C3 phosphorylation [69]. The extensive branching in amylopectin restricts the degree of hydrolysis by P-amylase, the P-amylolysis limits achieved (55-60%) are significantly less than those observed with amylose. Also, iodine is unable to form stable complexes with amylopectin because of the short length of the unit chains, only small amounts of iodine are bound (~0.6%);a red-brown complex is formed with iodine (h,,, 530-540 nm). As the external chain length increases, the h,,, of iodine-amylopectin complex also increases [7]. Althoughamylopectin does noteffectivelycomplexwithlipids, there is indirect evidence for such interaction by calorimetry [70,71]. The ratio of M,/M, for amylopectin has been reportedto be about 300, indicating a wide distribution of molecular sizes. In a good solvent, e.g., DMSO, amylopectin molecules have a highly planar, disclike conformation and behave as oblate elipsoids, with an estimated ratio of major to minor axes, p = a/b, of about 17 (using pulsed-field gradient NMR) [72] or even
higher (p = 37, using ultracentrifugal techniques) [73]. In water, aggregates are formed that are somewhat more spherical particles and give estimates of molecular mass some 400 larger than single molecules of amylopectin [72]. Early studies on the hydrodynamic behavior of amylopectin have sugis synthesized in the plastids as atwogestedthatthemacromolecule dimensional entity [74]. Amylopectin solutions appear to be more stable than those of amylose. However, solutions with concentration aboveC* (-0.9%) exhibit slowly progressing aggregation, as evidenced by turbidity development [75] or formation of a continuous gel network [76], presumably due to interchain associations in the form of double helical structures. Granules of some starches (e.g., amylomaize, wrinkled peastarch) may also contain asubstantial amount of an intermediate material that is, in itself, heterogeneous with respect to structure and molecular size. According to Banks and Greenwood [7],the intermediate polysaccharide fraction consists of linear chains with 50 < DP < 200 and lightly branched low-molecularweightmoleculeswith greater chain length thannormalamylopectin. Branched amyloses with up to 20 or more branches may also constitute a part of the intermediate material [57a]. Because of its structure and heterogeneity, the intermediate material cannot easily be fractionated and characterized. Nevertheless, this fraction is highly unstable in solution, leading to excessive retrogradation.
B. Supermolecular Structures of Starch 1. Molecular Probes of Starch Structure Many physical techniques have been applied to monitor changes in starch structures, but porarizing microscopy, electron microscopy, wide-angle Xray scattering and diffraction (WAXD), small-angleX-ray scattering (SAXS), solid-stateI3C-NMR, various viscometric techniques, and differential scanning calorimetry ( D X ) are the most widely used. Each of these methods is sensitive to a different level of structure, and over a range of distances, present in a starch system. For example, WAXD is sensitive to crystalline order over distances from about 0.3 to 2 nm, although the minimum dimensions for significant diffraction effects to be observed are probablyof the order of5-10nm.Cross-polarizationmagic-angle spinning NMR gives characteristic detailed spectra of A- and B-type crystal polymorphs of starch as well as of V-amylose complexes. In contrast to X-ray diffraction, NMR is considered a short-distance range probe, measuring order at the level of individual helices; i.e., it distinguishes helices either in or out of crystalline registry. Information about starch structures with shortrange order can be also obtained by calorimetry, whereas electron micros-
copy is important for studying structures ranging from single macromolecules up to larger macromolecular assemblies in the range of0.1-1.0 Also, some of these methods require dilute solutions or dispersions, while others are applicable to more concentrated systems or even dry specimens. There is often a need to provide complementary information using different physical techniques to characterize the structure of starch and improve our understanding about structure-function relationships of this polysaccharide.
Molecular order in native starch is evident from the optical birefringence pattern (“Maltese cross77)shown by granules when viewed under polarized light. This is a typical feature of spherulitic type of organization and is also exhibited by acid-treated granular starches [l81 and short-chain amyloses crystallized from solution [77]. The fact that starch is birefringent implies that there is a high degree of molecular orientation in the granule; however, crystallinity is not a prerequisite of birefringence. Since the refractive index is larger in the radial direction, starch macromolecules are disposed perpendicular to the granule surface [58]. Both birefringence and small-anglelightscattering measurements have been useful infollowing the kinetics of granule structure loss during gelatinization and the influence ofvarious cosolutes to this process, as extensively reviewed elsewhere [1,2,18]. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) have largelycontributed to the elucidation ofthe fine structure and morphological features of granular starch as well as of supramolecular assemblies involving starch polymers (e.g., gels, highly crystalline amylose specimens). Both TEM and SEM have given information relatedto the external and internal structure of granules following their degradation by acids or enzymes [18,78-83,83a]. For granular starch, the general picture that has emerged from ultrastructural studies is that growth rings (120-400 nm thick) consist of alternating crystalline (ca. 50 A thick and several hundred angstroms broad, representing the double-stranded helices of short DP chains of amylopectin) and amorphous lamellae (ca. 20 A) [M]. According to all current modelsof amylopectin [18,52,59,64], parallel helices assemble into radially oriented clusters. The 7-nm periodicity deduced from electron microscopy data is lower than the 9.0-10.0-nm figure determined by smallangle X-ray and optical diffraction analysis of electron microscopic images [84-861; the electron microscopy data are somewhat low, most likely due to shrinkage occurring during sample preparation. The 9.0-10.0-nm repeat distance is in close agreement with the value reported in an earlier cornmunication using small-angle neutron scattering ( S A N S ) measurements [87].
Oostergeteland van Bruggen [88] haverecentlyproposeda superhelical lamellar structure for amylopectin in potato starch based on TEM and electrondiffraction data of nondisrupted granule fragments. The crystalline regions (5 nm thick) consist of double helices (i.e., short DP chains of amylopectin) that interpenetrate each other, yielding on larger scale a continsuperhelical network. The arrangement of crystalline domains in a helical fashion leaves voids of -8 nm in diameter. theoretical model for the structure of native starch was also presented by Cameron and Donald [89] based on a rigorous treatment of SAXS data. The growth rings consist of alternating shells of partially crystalline regions (identified with the dense shells of growth rings, and having thicknesses of -140 nm) and largely amorphous material (background amorphous materialwith thickness at least as large as that of the dense shells). The partially crystalline regions were considered as being the lamellar stacks (clusters) of short DP chains of amylopectin, with thicknesses for the alternating crystalline and amorphous lamellae of 6.64 nm and 2.21 nm, respectively, i.e., overall an repeat distance of -8.85 nm. total number of lamellae (repeats) in each dense shell of -16 (corresponding to a distance of 140 nm) was calculated according to the fit. The electron density of the background amorphous material of a growth ring was found in between thoseof the crystalline and the amorphous lamellae of the dense shells. In this respect, the model implies the existence of three types of material in the native granule. A new level of starch granule structural organization (between that of lamellae and the growth rings), the “blocklet concept,” was recently proposed by Gallant et al. [83a] by reviewing old and new microscopic results obtained with different techniques. By analogy with the “superhelical amylopectin structure” of Oostergeteland van Bruggen[88],these authors claimed that the crystalline and amorphous lamellae of amylopectin are organized into larger, more or less spherical “blocklets.” The blocklets range in diameter between 20 and 500 nm,depending on their location in the granule and the botanical source of starch, and contain between 5 and 50 amylopectin short DP chain clusters. With thistype of granule organization, amorphousmaterialmay exist in differentregions: (1) in each lamella (branching zones of the amylopectin); (2) between clusters of side chains within each lamella; (3) around each blockletof side-chain clusters; and in radially arranged channels in granules through which amylose can exit during gelatinization. According to Gallant et al. [83a], the blocklets may be viewed as the structural elements of the alternating crystalline and partially crystalline shells of the starch granules often seen in SEM micrographs of granular starches corroded by a-amylases. They have further suggested that the size of blocklets and their arrangement in native starch may be important determinants of the granule resistance to enzymic attack.
Starch
Starch granules exhibit distinct WAXD patterns that can be classified into three categories: B (Fig. 2), and C. The A form is typical of cereal starches (e.g., wheat, corn); the B pattern is given by tuber starches (e.g., potato) as well as by high-amylose starches (e.g., amylomaize) and some genotype [90]. The C pattern is believed to be waxy starches with the a superposition of the A and B patterns. An interesting aspect of granule structure is the apparentrelationshipbetween the chain length of the branched molecules and the crystalline pattern. Starches with amylopectins residues) exhibit A-type crystallinity; those with of short chain length amylopectins of longer average chain length show the B pattern [52,91]. The notion that chain length is a major determinant of crystalline polymorphism of starch was further supported by crystallization studies of maltooligosaccharides used as model compounds [92,93]. According to Gidley and coworkers [93,94], the A polymorph (the most thermodynamicallystable form) is favored over the B structure (kinetically preferred form) under conditions of: (1) shorter a-D-glucan chain length, (2) highercrystallization temperature, and (3) higher polymer concentration,(4) slower crystallization conditions, and the presence of alcohol. The reverse is true for the B polymorph, which crystallizes readily from pure water. Interpretation of diffraction diagrams of native granular starches has been difficult due to imperfections, small size, and multiple orientation of starch crystallites [B]. The most detailed analysis of the A and B polymorphs has been based on X-ray and electron diffraction data from crystalline amylose and modeling studies [18,95-991. Both structures consist of double helices in which the two chains fit compactly; the hydrophobic parts of the opposed AGUs (anhydroglucose units)being in close contact, and the hydroxyls allowingfor strong interchain H-bonding [M]. The double helical nature of starch chains in the crystallites explains their insolubility in cold water and their resistance to acid treatment (glycosidic oxygens are buried in the interior of the helix and thus are less accessible to hydrolysis by H,O'); within the doublehelix,interstrand stabilization occurs through 0-2 0-6 H-bonding between the two chains as well through numervan der Waals interactions.The inner diameter of the double helix cavity is -0.35 nm (i.e., it does not allow any water molecule to pack inside the helix), while the outer diameter is -1.03 nm. The two polymorphs differ in the packing arrangement of the double helices and in the water content. The three-dimensional structural models of Fig. 2, proposed by Imberty and coworkers [98,99], are based on left-handed, parallel-stranded sixfold double helices packed parallel inthe crystalline lattice and containing 12 AGUs per unit cell; each strand contributes three out ofsix residues per helix turn. For the Astructure, chains are crystallized in a monoclinic lattice (unit cell parameters = 21.24 & b = 11.72 & c = 10.69 & and a = = 90°, =
---
Diffraction angle (28)
-
m i c a 1 X-ray diffraction patterns of A-type granular starches (bottom) and B-type granular starches(top) and of ( U , b)-plane projections fortheir crystalline structure (models by Imberty et al.), showing the packing arrangements of double helices, water molecules, and hydrogen bonding; chain duplexes marked 0 and */2 indicate their relative translation along the c-axis. (Adapted with permission from Refs. 98 and 99.)
123.5') having the maltotriose as a repeating (asymmetric) unit and four water molecules per unit cell. The hexagonal subcell of the B pattern of tuber and retrograded starches'(u = b = 18.5 & = 10.4 & and (Y = = go', = 120') has a more "open" packing of double helices, a maltose moiety as an asymmetric unit, and 36 water molecules (at -27% w/w hydration) per unit cell. The water molecules fill the large central channel formed by the hexagonically packed double helices; half of the water is tightly bound to the chains, and the other half is connected only to other water molecules. In both structures, pairing of double helices corresponds to 1.1-nm distance between axes of the two double helices. There is also a shift of the relative position between neighboring double helices along the c-axis (translation by half the fiber repeat distance), which permits a very good fit between duplexes and allows for the occurrence of H-bonds. Thus, besides the van der Waals interactions, the cohesion between neighboring double helices in the crystalline lattice is strengthened through H-bonding between 0-2 0-6 and 0-3 . . . 0-3. Calculated densities for the crystalline regions of A and B structures are 1.48 and 1.41, respectively [98,99]. These structural models are consistent with the cluster-type molecularstructure of amylopectin and reconcileall known physical, biosynthetic, and morphological aspects of the starch granules. High-resolution solid-state 13C-NMRconfirmed the asymmetry assignments for the A andB structures [loo-1041. The characteristicmultiplicities observed for the C l signals reflect the difference in crystal symmetry between the two forms (Fig. 3). In the A-type starch, which has a maltotriose repeating unit (i.e., three nonidentical AGUs), the C l resonance appears as a cluster of three peaks (-99.3, 100.4, and 101.5 ppm). In contrast, the B structure with two nonidentical AGUs shows a twofold multiplicity for the C l peak (individual chemical shifts at -100.9 and 100.0 ppm). Only a small portion of the starch granule is believed to be crystalline. Kainuma and French[l051 have visualized the hydrated granule as an amorphous gel matrix in which the crystalline regions are embedded. Crystallite dimensions, estimated from line-broadening studies of the X-ray diffraction peaks, are of the order of 14.4-14.7 nm [18]. However, smaller crystallite sizes in the range of 40-50 A have been also reported. If the outer short DP (-14-16 AGUs) chains of amylopectin are taken as a factor in crystallite size, then an estimated length of the crystalline domains would be about (14-16) X 3.5 = 49-56 (repeat distance for six AGUs of double helices is 21 A). By integrating the X-ray scattering intensity separately Over the peaks and over the background (arising from the amorphous phase), estimates of the relative amounts of crystalline phase can be obtained. According to %bel [8], crystallinity values for granular starches range from 15% to 45%, with the A type showing values between 33% and45%.Waxy
.. .
Billaderis
U Me,Si
3 CF’/MAS I3C-NMR spectra of highly crystalline A-type amyloses (a) and B-type amyloses @), amorphous amylose (c), V.-amylose (d), and V,,-amylose (e). (Adapted with permission from Ref.
starches give good X-ray diffraction patterns, while high-amylose starches show low crystallinity,15-22%[8,106]. These observations support the viewthatamylopectin is theprincipal crystalline component native starches. Recent WAXS studies suggested the coexistence A-, B-, and Vtype polymorphs in some starches [106]; e.g., the crystalline regions of wheat and rye starch (A-type starches) granules were found to contain between 7% and 10% B-type structures, while the crystalline phase highamylose starches (amylomaize, wrinkled peastarch) consists of 74.6-84.6%
'
B type and 15.4-22.6% V type. It is likely that environmental conditions during seed development affect the proportion of B structures in A-type starches; high humidity and low temperatures would increase the amount of B crystallites present in granular starch. In considering the short-range order of a-D-glucans, including starch, an interesting approach in identifying ordered structures (A, B, and V) and quantifying the ratio of double helices to single chains has emerged from solid-state 13C-NMR studies [101,104,107,108]. Fora range of granular starches the double helical content was found between 40% and 50%, substantially higher than the respective crystallinity values, 25-35% [101,108]. With further development of the 13C-NMRmethodology, structure-function relationships and molecular mechanisms involvedin many technological applications of starch materials could be widely explored. Although it constitutes a major portion of granular starch, the amorphous material has received very little attention until recently. The amorphous phase is less dense and more susceptible to chemical and enzymic modification [18,109,110]. Diffusion of small water-soluble molecules (of
Bllladeris
of amylopectin and that most of amylose exists in a disordered state, it is not unreasonable to accept that there is no sharp demarcation between crystalline and amorphous domains in granular starch. Instead, a range of structures is expected between well-developed crystallites and fully disordered regions.Inthis type of supermolecularorganization, the amorphousand crystalline phases are interdependent. The arguments provided recently by Gallantetal.[83a] on the organization of lamellaeand their polymeric constituents in granular starch concur with such a view. The distribution and arrangement of amylose and amylopectin within the starch granule remains an intriguing question. As the amylose content increases with grain maturation [7]and the granule grows by apposition, it is reasonable to assume that the outer parts of the granules have a higher proportion of amylose. This was recently confirmed bygranule erosion (cold gelatinization, commencing at the outer layers of the granule and continuing toward the center) of potato starch using 4M CaCl, [115];amylose was more concentrated at the periphery and hadsmaller molecular size than that at the core of the granule. An interesting feature of amylose and amylopectin, when one attempts to depict the distribution of these polymers in the starch granule, is their incompatibility. When concentrated solutions of amylose and amylopectin are mixed, they exhibit immiscibility, with the formation of an amylose-rich and an amylopectin-rich phase [116].If amylose exists as a dispersed phase during biosynthesis, it may be incorporated as amorphous material filling the voids in the amylopectin lattice. Zobel [8]and Blanshard [l] presented several arguments to support the view thatamylose is separated from amylopectin in the granules of corn and wheat starch and is mixed (partly cocrystallized) with amylopectin in potato starch. Light crosslinking of granular starches (corn, potato) and characterization of the products by molecular sieve chromatographyindicatedthat amylose was crosslinked with amylopectin and that there was no crosslinking between amylose molecules [117,118].These datasuggestedthat, in granular starch, amylose molecules do not exist in the form of bundles at amorphous regions but rather are interspersed among the amylopectin molecules. Itis also plausible that some amylose molecules participate in double helices with amylopectin and thereby become less prone to aqueous leaching or complexation with iodine, particularly in potato starch.
3. Another crystallographically distinct structure of starch, typically observed when amylose forms complexes with various ligands, is the V-polymorph. In V-amylose, the chain conformation is a left-handed single helix with six residues per turn (V,) for complexes with aliphatic alcohols and monoacyl
Starch lipids; the rise per monomer residue is ca. 1.32-1.36 [41,42]. In most structural models proposed, based on X-ray analysis of crystalline fibers or electron crystallography data, helices are packed with either orthorhombic or hexagonal symmetry[119]. When the ligand is bulkier than a hydrocarbon chain, helices of seven or eight glucose residues per turn are also feasible [95]; the diameter of the helix cavity is 4.8 with six AGU, 6.3 with seven AGU, and 7.8 with eight AGU per helical turn. Most amylose complexes can be obtained as hydrated (V,>)or anhydrous (V,) structures giving characteristic X-ray diffraction diagrams (Fig. 4). For amylose-lipid complexes the unit cell is orthorhombic, with dimensions = 13.7 A, b = 23.8 c = 8.05 for the v,, form, and = 13.0 A, b = 23.0 A, c = 8.05 for the V, form [41,120]; in the crystalline lattice, the amylose chains are organized in antiparallel pairs, with center-to-center distances between adjacent helices of 13.7 in v,,. A difference in helix rotation ("21') and a helix shift (translation) along the c-axis (-1.3 has also been claimed between the two structures [41]. The observed slight expansion in lattice constants on going from V, to V,, is due to water present within the crystalline lattice (interstitial together with intrahelical) [41,121,122]. The interstitial water (eight molecules per unit cell) is hydrogen-bonded to the hydroxyl groups on the amylose helices in a dense network forming bridges between the chains [41]. The aliphatic chain in the helix is rather locked in a solidlike state (i.e., with a fixed conformation that is prevented from rotation due to steric conflicts), as suggested by Raman spectroscopy [123], "C CP/MAS-NMR [124,125] and molecular modeling [43] studies. The 13C CP/MAS-NMR spectra ofV, and V,, amyloses (Fig. 3) also indicate that these structures differ from those of A and B polymorphs [103]. For comparison, the corresponding spectrum of amorphous amylose is also shown in Fig. 3. The spectrum of amorphous amylose seems to be similar to that of V, except for the shape of the Cl line; the former appears as a composite of a relatively sharp resonance and an upfield tailing, while the latter exhibits only a rather sharp, single line for Cl. X-ray diffraction of scattering diagrams of granular starches do not usually show the presence of V-structures, with the exception of wrinkled pea starch, amylomaize, and some other maize genotypes (dull, all with amylose contents greater than 30% [90,106,112]. The lack of V-type characteristic peaks upon X-ray analysis does not necessarily prove the absence of amylose-lipid complexes; it merely indicates the absence organized helices into well-developed three-dimensional structures (long-range order). The question of whether amylose inclusioncomplexes are present in normal cereal starches has been recently resolved, after a long debate. Besides all circumstantial evidence for some form of association of amylose with granular monoacyl lipids (lysophospholipids, free fatty acids) in situ [26], l3c
Billaderis
4
8
12
16
20
Diffraction angle (20)
4
8
12
16
Diffraction angle (201
24
32
24
32
-
-
4 X-ray diffraction patterns of V.- and V,-amyloses along with the b) plane projections of helices, showing the hydrogen bonding arrangements. (Adapted with permission from Refs. 41, 120, and 281.)
Polymers
CP/MAS-NMR studies provided the proof for the presence of V-conformation in granules of maize, oat, barley, rice, and wheat starches [124-1271. The two special features of nonwaxy cereal starches, indicative of single Vamylose helices, were: (1) the presence of a broad resonance peaking at 31 ppm (corresponding to midchain methylene carbons of monoacyl lipids), which reflects a near-solid-state structure of lipids due to steric constraints in the helical cavity; and (2) a signal of C l at 103-104 ppm attributed to V-conformation. These resonances are enhanced in acid-treated (lintnerized) starches [126]. X-ray scattering data of enzymatically degraded wheat starch (to increase the proportion of ordered domains in the enzyme-resistant residues) also revealed the V-structure, indicating the presence of amyloselipid complexes in native granules [106]. Although common granular starches do not show the V-structure, at least in the sense of three-dimensionally ordered domains, development of this polymorph canbe readily inducedby heat-moisture treatments of starch (18-45% moisture,90-130°C for 1-16 h) [90], by extrusion cooking [128,129], or simply by gelatinization and cooling of starch dispersions. Under such hydrothermal conditions there is increased mobility of amylose chains complexed with naturally occurring monoacyl lipids or externally added ligands (monoglycerides, fatty acids), leading to formation of larger assemblies detectable byX-rays.Extrusionof cereal starches [l281 and blends of cassava starch with 2-4% monoacyl lipids [129], at 22% initial watercontent,led to formationof two types of structure, depending on extrusion temperature. Below 170°C the X-ray diffractionpatterns of extrudates were typical of the V,, structure. In contrast, whenstarch was extruded at >185"C and the final moisture content was <13%,a new structure called "extruded," or E,-type, was observed. The latter was characterized by a slight displacement of all three diffraction peaks of V,, to lower angles; e.g., the main peak of E,, occurred at -9"03', compared to 9"54' for V,. Differences between the two structures were attributed to different interaxial distances of the helices. According to the X-ray data, the interaxial distances for the V, and E,,, rebetween adjacent helices were 13.8 and 15.0 spectively. It was also shown that the E,, is fairly labile and irreversibly transforms to the v, by reconditioning the extrudates to 30% moisture. This suggests that the Eh form, with the less well-packed chains, is a metastable structure. A lamellar morphology has been proposed for the solid-state organization of helices in isolated V-amylose crystals [130-1321; i.e., polysaccharide chains are folded and lie with their axes perpendicular to crystal surfaces. From the Bragg equation, the calculated long spacings were 75-100 [130,131], while heterogeneous hydrolysis of V-amylose complexes with a-amylases (to selectively remove the amorphousregions) gave enzyme-
Billaderis
resistant amylodextrinswith chain lengths corresponding to a lamellar thickness of -100 [133]. However, a detaileddescription of the supermolecular structure of amylose-lipid complexes in thermally processed foods is a difficult task, because helices can exist in various states of aggregation, depending on the thermomechanicalhistory of the product.Applicationof calorimetry and X-ray diffraction to studies on starch-lipid interactions has undoubtedlyadvanced our knowledge of the structure andpropertiesof amylose-lipid complexes [134-1421. With monoglycerides [136-1391, internal starch lipids [141], fatty acids [142], and linear alcohols [l431 as complexing ligands, at least two structurally distinct forms were identified. A morphological model for the solid-state organization of chains in these polymorphs (I,11) has been postulated [137]. Form I (of low T,), obtained under conditions favoring rapid nucleation, was described as an aggregated state where ordered (helical) chain segments have insufficient packing for crystalline order to be shown by X-ray diffraction (i.e., it gives an amorphous pattern). In contrast, formI1 (of high T,) appeared as a polycrystalline aggregate with well-developed long-range order,showing the typical reflection of the V-pattern. Understanding the supermolecular structure, stability, and transformations between the various forms of amylose-lipid complexes is of great fundamental and technological importance, considering the multifunctional role of lipids in starch-based products. For example, incorporationof monoglycerides in the dough is known to retard starch retrogradation and bread firming [144,145]. Similarly, monoglycerides added to dried potatogranules prevent stickiness [146]. Improvements in structural integrity of cereal kernels during cooking (e.g., parboiled rice) [141], as well as decreased swelling, solubilization, and thickening power of starch [26], have also been ascribed to starch-lipid interactions. The limiting swelling of cereal starch granules during heating, compared with that of the waxy lipid-free tato) starches, is believed to be due to the presence of amylose-lipid complexes that melt at temperatures higher than the gelatinization temperature of starch [134]. On the other hand, formation of V-complexes maybe somewhat troublesome in processing and end-product quality of starch hydrolyzates [l471 and in some nonfood applications of starch, such as paper sizing [148].
4.
RetrogradedStarchStructures-ResistantStarch
Whereas in granular starch amylopectin is the main crystalline component, both amylose and amylopectin are involved in molecular reassociations in aging starch gels and baked products. Following gelatinization and pasting, these systems are not in a state of equilibrium (metastable states) and, there-
Starch fore, undergo structure transformation via chain aggregation and recrystallization on storage. Crystallites, of B type, form eventually, and this is accompanied by gradual increases in rigidity and phase separation between polymer and solvent (syneresis). The postgelatinization changes accompanying these molecular processes, collectively described by the term retrogradation, are thought to have a major influence on texture, digestibility, starch-basedproducts.Retrogradation is a andconsumeracceptability complexphenomenonand depends onmanyfactors, such as source starch, starch concentration, cooking and cooling temperature regimes, pH, and the presence of solutes such as lipids, electrolytes, and sugars [149]; e.g., repeated freeze-thaw cycles are known to accelerate retrogradation and syneresis drastically [150]. Because retrogradation involves a recrystallization process, either calorimetry or X-ray diffraction can be used to follow it. With DSc, the development of structure can be monitoredfrom the magnitude of the melting endotherm of recrystallized amylopectin (T, = 4560°C), while with the X-ray diffraction total crystallinity for both starch polymers is followed by the evolution of the B pattern. The intensity or the area under the characteristic d-spacing at 15.8 of the B pattern, corresponding to the (100) reflection, is often used as an index crystallinity. However, it is important here to remember that the intensity of this reflection is highlydependenton the water content of the specimen[99,113,114]. Finally, macroscopic effects, observed as changes in the mechanical properties of an aging starch system, can be probed viavarious rheological methods. The molecular mechanisms and transformations that occur during gelation andretrogradation of starch and its components are described in greater extent later in this chapter. Structural studies have been carried out to establish the length and the nature of polymer chains involved in interchain associations or crystallites of retrograded amylose and amylopectin [75,151,152]. In this respect, gels were submitted to heterogeneous acid hydrolysis to erode the amorphous regions. The acid-resistant amylodextrins were characterized by chromatographyand enzymic analysis. Crystallites inretrogradedamylopectin gels were found to consist single or multiple branched amylodextrins originating from the outer short DP chain clusters of the molecule. Because of the relatively low DP segments (-15) involved in the crystallites of amylopectin, their melting transition starts about 37-4OoC, and this explains the susceptibility of retrograded amylopectinto a-amylolysis in vitro and invivo [153-1551. In contrast, the chain length over which associations between amylose chains occurs in retrograded amylose is relativelylonger, with DP 30-50 [75,133,156]. High-resolution solid-state l 3 C - m confirmed the presence of aggregated double helices of B type in amylose gels [157,158], while calorimetry has shown that these structures are thermally
-
resistant (melting temperatures -130-170°C) [134]. Another consequence of conformational ordering and aggregationof double helicalchain segments in retrograded amylose is their resistance to acid and enzymic hydrolysis [133,154]. The amylase-resistant linear amylodextrin (originating from retrograded amylose) constitutes a fraction of the so-called “resistant starch,” i.e., the starch resisting digestion in the small intestine and becoming available for fermentation in the large intestine of man [159,160]. This type of resistant starch (RS) forms during thermal processing (heat-moisture treatments) and cooling of amylose-containing starchy foods as a result of amylose retrogradation (e.g., bread, breakfast cereals, cooked potatoes, canned beans). There is presently considerable interest in the nutritional implications of resistant forms of starch in foods, for they seem to have an influence on reduced plasma glucose and insulin levels [161], increased feacal bulking [162], and the potential for beneficial effects on the health of colonic epithelial cells [163]. The amount and structure of enzyme-resistant retrograded starch in autoclaved starch pastes and actual food products depend on several factors. Formation of RS is enhancedwithincreased amylose content of starch [164-1671, increasing number of autoclaving-cooling cycles [164,166], a starcywater ratio of k3.5 [166], increasing autoclaving temperatures (up to 134°C) [164,166], and low storage temperatures [165,168]. Monoacyl lipids have a negative influence on RS yield, because they can form inclusion complexes with amylose and thereby competitively decrease the extent of interchain associations between linear starch chains [169-1721. The main techniquesused to characterize the molecularand physical structure of RS are size exclusion chromatography [133,154,169,173,174], DSC [166,167,170,171,175], X-ray diffraction and, recently, solid-stateI3C-NMR[158,178]. Depending on source, sample preparation, and enzyme hydrolysis conditions, the reported average degree of polymerization (DP) of linear dextrins of RS ranges between 20 and 65 Moreover, it has been demonstrated that the isolated linear fractions of RS formed in in vitro and in vivo studies are of comparable size (DP, 35) [179,180]. With most chromatographicsystems employed, there seems to be a rather broad distribution of chain lengths in enzyme-treated retrograded starch. Gidley et al. [178], using high-performanceanion exchange chromatography,havereported chain distribution profiles with DP between 10 and -100. The wide range of chain lengths is consistent with the broad melting endotherm (spanning from about to 170”C, with a T,,, of 150-160°C) observed for most preparations of RS heated in excess water [134,166,167,175,178]. The resistant portionsof acidand enzyme-resistant retrograded starches give diffraction patterns charac5 presents DSC andX-ray teristic of B-typecrystals.Forexample,Fig.
-
Starch Polymers
t -
-
resistant Yield: 18%
Acid resistant
I
.
.
.
.
l
.
.
.
*
'
*
8
24
Diffmctlon
(20)
---_
0.1
l
ob
ab
lio lio
Temperature CC)
I&
4b
ob
Temperature ("C)
Figure DSC solids) and X-ray diffraction diagrams of acid- and enzymeresistant amylodextrins derived from retrograded amylomaize starch gels.
diffraction patterns of acid- and enzyme-resistantforms of retrograded amylomaize-VI1 starch.The diagrams clearlyindicate that the two residues differ substantially in the level of crystalline and molecular order. The enzymeresistant amylodextrin, although it had a greater content of double helical segments 27 J-g" vs. 16 J-g"),showeda weak X-raypattern, compared to its acid counterpart. However, the DSC profile of the enzymetreated residue is indicative a more homogeneous distribution of ordered segments than that of the acid amylodextrin, which gave multiple melting transitions. The level of crystallinity for RS, estimated by X-ray diffraction, is dependent on the conditions employed for sample preparation (starch con-
a2
Biliaderis
centration, heating-cooling regime, acid or enzyme hydrolysis conditions, etc.). Estimates of crystallinity for enzyme-resistant residues range between 25% and 60% [176,178,181], while quantitative analysis of the molecular order (double-helixcontent), as assessedby solid-state 13C-NMR, gives much higher values (60-95%) [158,178]. The high level of double-helical order in RS is consistent with the resistance of such material to enzymic hydrolysis, as was first suggested by Jane and Robyt [133]. The average size of crystallites in retrograded amylose, calculatedfrom X-ray line broadening analysis, ranged from 7.3 nm to 9.3 nm [181]. This is consistent with the crystallite size of -10 nm corresponding to an average chain length of -32 AGU found for acid-resistant fragments of retrograded amylose [133]. Several models depicting chain packing in the partially crystalline structure of retrograded amylose and RS have been proposed [133,156,174]. Based on X-ray diffraction, I3C CP/MAS-NMR, and chromatographic data, Gidley et al. [l781 have recently presented a structural model for enzyme-resistant retrograded starch from wheat and amylomaize starches. Accordingto their description,there is a substantial amount of double-helical order (-6070%) in RS, with the chains (DP:10-100) arrangedintoaggregates of limited crystalline packing (-25-30% crystallinity). The disordered nondouble-helicalmaterial,interspersedbetweenaggregates, may consist of folding regions, chain ends, andsingle chains trapped within the aggregates. There is also a small fraction (5-8%) of amylose-lipid inclusion complexes in the solid-state matrix. It was further suggested that the broad distribution of linear chains observed in RS is a consequence of the highly aggregated structure of gelled amylose (high double-helix content,low crystallinity, and a broad range in DP of chain segments at junction zones), and the reduced accessibility of a-amylase to the domains of aggregated double helices due to steric reasons.
Over the past two decades, the state and phase transitions of starch, related to changes in molecular mobility as well as the ordering-disordering processes starch polymers undergo during heating, cooling, and storage, have been intensively investigated. By analogy with synthetic polymers, gelatinization and retrogradation are currently viewed as melting and recrystallization of starch in the presence of water. A variety of chemical, enzymic, andphysicalmethodshavebeenemployedtostudythesephenomena [2,182]. Among them, X-ray diffraction, rheological methods, and thermal analysis haveattracted the mostinterestin studying phasetransitions of aqueous starch systems. Usingthesetechniques, a great deal hasbeen
Starch
learned about the effects of water content, annealing effects, and the influence of various cosolutes or other constituents on the thermal and mechanical properties of starch dispersions [l-4,134,149,182-1961. Thermal analysis, in particular, has provided invaluable insights into the critical role of water and other low-molecular-weight solutes as plasticizers of starch, as well as the relevance of water plasticization to the state and phase transition behavior of this biopolymer during processing and storage. The subject has been extensively discussed in several reports [2-4,191,194,197-2001 that addressed the nonequilibrium (metastable) character of aqueous starch systems andthetemperature-,moisture-,andtime-dependence of structural, mechanical, and functional properties of starch. This section will focus on the description of phase transitions of starch polymers in relation to their supermolecular structure and its response to environmental conditions (temperature, solvent, other solutes, etc.), as schematically illustrated in Fig.
A.
The Glass-Rubber Transition of Starch
The glass-rubber transition, although somewhat foreign to starch chemists, is a phenomenon well known to polymer and material scientists. It is considered the most important property of synthetic polymers, affecting their mechanical properties, processing behavior, and stability [201]. Despite the existing controversy with regardto the fundamental nature the glass transition [202], glass formation (at a characteristic temperature, T,) is generally viewed as “freezing out” of large-scale molecular motions (rotational and translational), i.e., for polymers, the wriggling motion of conformationally disordered chains ceases. Thus, amorphous materials mayexistin either brittle,glassy(viscosityapproaching 1012-1014Pass), or mobile,rubbery state, depending on whether they are below or above their T,. The glass transition is accompanied by a gradual change (discontinuity) in the thermodynamic properties, such as thermal expansivity andheatcapacity, cp [203]. Also, a dramatic drop in modulus or viscosity at TR(a change of approximately three orders of magnitude for a typical amorphous synthetic polymer [201]) reflects the onset of segmental motion of the polymer chains as the material passes from a glassy to a rubberlike state. Analysis of this transitionalbehavior of a polymer by various thermal analysis methods [DSC, dynamic mechanical-thermal analysis (DMTA),thermomechanical analysis (TMA)] is in fact based on these T,-inherent property changes. In pure amorphous macromolecules, the glass transition entails a change over a temperature range of about5-20°C. However, insemicrystallinematerials, the presence of microcrystals and strained chain segments between crystallites tends to increase the temperature and range over which this transition occurs [204]. Each amorphous or partially crystalline material will have its
I
Starch own T, (often specified as the temperature at which the polymer is midway between the immobile glass and the rubbery liquid), depending on several factors, such as molecular size, side-branching, degree of crosslinking (inFor the latter, it has cluding crystallinity), and diluent content long been known that the addition of a small-molecular-weight diluent, or plasticizer, to a glassy polymer lowers its Tr Water, for example, is a very effective plasticizer of manysynthetic and natural polymers, causing a large depression in their TB The addition of small quantities of water (plasticization) produces an effectsimilar to an increase in temperature; i.e., there is an increase in segmental mobility of the polymer, compared with the nonplasticized material, at any given temperature above the T,. This is the result of an increase in free volume in the polymer matrix and/or the breaking or weakeningof some intermolecular bondsby the plasticizer The ability of a diluent to depress T8 decreases as its molar mass increases. The increased mobility of chains in the amorphous regions has, in turn, implications on processing quality, mechanical properties, and storage stability of the plasticized polymer. Because glasses are nonequilibrium states, the glass transition is also affected by kinetic factors, annealing treatments, and the previous thermal history of the sample e.g., slower cooling rates give rise to lower values ofTn whereas annealing at sub-T, temperatures shifts the transition to a higher temperature. Following the pioneering theoretical and experimental works of van and Slade and co-workers there is a den Berg growing realization of the importance of glass transition as a physicochemical event (change of state but not a change of phase) controlling the phase transitions and properties of starch. Some of the first evidence consistent with the existence of a glass transition for heated starch specimens came from heat capacity measurements with DSc. An incremental change in c, J.g"-K") prior to the melting endotherm of starch crystallites (Fig. and a minor baseline shift upon superposition of initial scan (granular starch) and rescan of the same sample were attributed to glass transition of the amorphous domains of starch granules. However,it appears is not due to that the Ac, accompanying the major endothermic peak a glass transition, as recently argued by Lelievre For native wheat starch, Zeleznak and Hoseney have reported a Ac, typical of a glass transition at lower temperatures than just prior to the melting peak. The discontinuity in c, at T, is small and not easily detectable calorimetrically for most granular starches.Despite the relatively low crystallinity of these materials the difficulty of identifying and assigning a definite T, most likely originates in the nature of the amorphous granular phase. For partially crystalline polymers, the reduction in Ac, due to increasing crystallinity does not obey a simple additive rule of a two-phase system (fringe-
ii (II
I
5 U
40
80
160
Temperature ("C) DSC thermal curves a granular starch (at two different weight fractions) showing a glass transition (TB)and melting transitions.
micelle model), where crystallites and amorphous matrix behave independent of each other [213,214]. The crystalline regions, acting as physical crosslinks, cause changes in the thermal properties of the amorphous material and decrease Ac, more than would be anticipated assuming an ideal two-phase model structure; e.g., for polycarbonate with a degree of crystallinity as low as 23%, there is no detectable Ac, at T, [215]. To account for such thermal behavior of granular starch, a simplified "three-microphase" model was proposed [191]. In addition to starch crystallites,thismodel incorporates twotypes of noncrystalline material:(1) bulk, mobile-amorphous regions giving rise to a heat capacity change (e.g., amylose); (2) intercrystalline rigid-amorphous material that does not contribute to the Ac, observed at T, as it is motionally restricted byits proximity to crystallites (e.g., regions of dense branching in amylopectin). The sequence of thermal transitions in such a system would be Tg(mobileamorpho Tg("gid amorphous)
Tm("gid crysyslaUine).
Although this polymeric view of starch granule structure is convenient to explain the lack of a discernible glass transition on many DSC thermograms, it is likely that, instead of two distinct amorphous microphases, a range of nonordered structural domains exist in granular starch. Each of
Starch these regions could manifest its own T, and exhibit a different plasticization behavior by water. This, in turn, would spread the glass transition over a broad range of temperatures and account for the difficulty to detect it by calorimetry. In contrast to native starch, the glass-rubber transition is more readily detected for gelatinized materials [212,216,217] or isolated starch polymers[218-2241bythermal analysis techniques. The change in heat capacity at Tg for dry amorphous amylopectin was reported to be 0.47J.g" -K" [221]. It has been also noted that Tgincreases with increasing crystallinity [212,223], which is in agreement with observations made on synthetic polymers [214], indicating the stiffening action of crystallites on molecular mobility ofchains in the amorphous domains. Moreover,the temperature location of glass transition of starch is dependent on the thermal history of the sample as well as the time scale of the experiment, i.e., the heating rate (DSC) and/or the frequency used in a relaxation type of experiment (DMTA or dielectric measurements). Thus, for amorphous starch and amylopectin, the T, values determined from the midpoint of heat capacity change at a rate of 10°C/min, usually fall between the drop in modulus and the tan peak obtained with DMTA at a heating rate of 2OClrnin and a frequency of 1Hz [217,223]. For all the reasons already stated, and in view of the strong dependence of TBon moisture content, it is not surprising that there is considerable variation in the literature among the reported values of T, for starch materials. The most important feature of amorphous starch, having many implications on processing and product quality, is its plasticization by water and other low-molar-mass polyhydroxy compounds.A detailed atomistic model for amorphous starch with water was recently presented using computer simulation [225]. In the dry amorphous starch model structure, a high cohesive energy density was found, proportional to the density of interchain hydrogen bonding [226]; the strongly hydrogen-bonded network can account for the high Tg of amorphous starch. With increasing water content of the amorphous starch matrix there has been a decrease in the interaction energy and an increase of the distance between chains [225]. These effects are manifestations of the plasticizing role of water onstarch at a molecular level. The dependence of T, on water content of starch samples is shown in Fig. 8 using DSC datacompiled from several reports. It appears thatwater strongly depresses the Tgof starch, particularly between0 and 20% moisture content (m.c.); at higher m.c., T, drops below the freezing point of water [3,208,211]. For granular starch, it has been shown thatabove 30% moisture content, TBis constant (i.e., amorphous material is fully plasticized) due to the formation of a separate water phase outside the granules [191]. The drop in modulus at T, as assessed by DMTA, is also dependent on the moisture content of starch and is usually smaller than that expectedfor typical amor-
"1
4
Arvanitoyannis (1994) [ref. Arvanitoyannis et (1994) [ref. 2771 Kalichevsky (1992) [ref. 223) Zeleznak Hoseney (1987) [ref. 2721
5
Zeleznak & Hoseney (1987) [ref. 2721
1
2
3 A
120
A
100
80
"
60
--
40
--
20
"
I
5
15
20
25
. The variation in glass transition temperature starch (DSc data) as a function of water content: 1, 2, and correspond togelatinizedpotato,rice,and wheatstarches,respectively;3and 5 correspondtoamorphousamylopectinand granular wheat starch, respectively. (Data compiled from Refs. 212, 217, and 223.)
phous polymers (-lo3 Pa) [196]. The Tg of dry amorphous starch is experimentally inaccessible because of thermal degradation of starch polymers at indirect procedures have been employed to eselevated temperatures. timate the Tg of dry starch: (1) study of the plasticizing effect of water and extrapolation to zero moisture content [191]; and (2) study of TBfor dry malto-oligosaccharides and extrapolation to a high-molecular-weight limit [221]. Applying these methods, we find that the estimated TRof dry starch is in the range 230-240°C. It has been possible to fit T, data of starch-water systems and make predictions using the classic thermodynamic theory of Couchman and Karasz [227], adapted for polymer/diluent mixtures [228]:
Starch
where T, is the glass transition temperature ofthe polymer-diluent mixture, wl,W, are the weight fractions of diluent and polymer, respectively, and Acpl, Acp2 are the corresponding changes in heat capacity atTgl(pure diluent) and Tgz(unplasticized polymer). Application of this equation requires the use of published values for T, (136 K) and Ac, (1.94J-g")ofwater [228,229]. Predictions of glass transition behavior for binary mixtures of starch-water systems using this fundamental approach had a reasonable degree of success [221,223,230-2321. The Couchman-Karasz equation has also been used to fit DSC data of binary blends of amylopectin with gluten or casein (1:l) [233], while an extended three-component version of this equation was employed to predict the T, of ternary systems, amylopectinwater-sugar [234,235]. The DSC and DMTA data of gluten-amylopectin blends (l:l), at watercontents between 10% and 20%, indicated the presence of two distinct Tg, (defined from the shifts of c,, the change in slope of modulus or the tan peak temperatures of DMTA curves) corresponding to the two polymeric components of the blend [233].This behavior is indicative of polymer incompatibility. The T, of both components decreased, and the lower transition, arising from the gluten-rich phase, came closer to that of amylopectinwith increasing watercontent[233].Foramylopectin-sugar blends, a high degree of polymer plasticization by the sugar was observed at reduced watercontents (7-10%) [196,234,235]. The plasticizing effect of various sugars increased with the decrease of the glass transition of sugar [234]; i.e., among sucrose (T,= 70"C), glucose (T,= 38OC), xylose (Tg= 13"C), and fructose (T, = 7"C), the degree of plasticization of amylopectin followed the order sucrose < glucose < xylose fructose. On increasing sugar content (amy1opectin:sugar from 4:l to 1:1, moisture 7-lo%), a second transition occurred at about 10°C, which increased in magnitude with the sugar level andseemedto dominate the mechanical behavior of the blend, as attested by DMTA and the three-point bend test [196,235]. This transition, attributed to the sugar, does not necessarily imply phase separationbetween amylopectin andsugar, as pointed out byKalichevskyand Blanshard [235]. It may simply be a manifestation of the less free volume required for diffusion and mobility of the low-molecular-weight plasticizer molecule in the blend; i.e., although sugar and amylopectin experience the same free volume, mobility of the smaller plasticizer molecule commences at a lower temperature than the T, of the polymer. Another empirical expression, known as the Gordon-Taylor equation [236], has also been employed to calculate the T, of amorphous starch or sugars at various water contents [234,237,238]:
Biliaderls
where TR1and Tg2are the glass transition temperatures the polymer and diluent, respectively, and W, are the corresponding weight fractions of the polymer and diluent, respectively, and K is a constant related to the strength of polymer-diluent interaction (thelarger the value of K,the greater the plasticization effect). The impact of variation in structure on T, has recently been examined by Bizot et al. [224] using several om-glucans differing in the degree of branching, molecular size, and type of glycosidic linkages. The T,-water content curves, modeled by the Couchman-Karasz equation, were almost parallel within the range 5-25% (w/w) water content. The glass transition temperatures followed the following order: amylose (mol. X lo') > potato starch > amylopectin > phytoglycogen > short DP (-15) amylose. The effect branching as T, depressor is well known and is often described as internal plasticization [201]. The presence of o~(1-6) linkages in &-Dglucans would increase total free volume and chain mobility, not only by introducing additional chain ends, but also because of the three rotational degrees freedom of this linkage; for low levels of branching, these effects cause depression of the T, [220,224]. distinct chain length dependence of Tg for the homologous series malto-oligosaccharides (maltose-maltoheptaose) has been realized [221]; there was a linear relationship between Ti1 and DP" for the oligomers. The relationshipbetween T, andmolecular weight (M) is generally described by the Fox and Flory equation:
where Tirn)is the limiting glass transitiontemperature of thepolymerat infinite molecular weight and K is a constant characteristic of the polymer. The increaseof T, withmolecular weight levels offathighmolecular weights due to entanglement coupling of polymer chains [202]. Treatment of T, for substituted amyloses with this relationship was only partially successful [220]. An endothermic peak near or below the glass transition temperature of starch at low mixture contents (9-20% w/w) has been observed by DSC [216,223,239-2411. This endothermic event, also shown for a wide range of polysaccharides at similar levels moisture, increases in magnitudewith water content andagingtimeat sub-T, temperatures [216,239,240]. The development of a sub-T, heat capacity peak is a general feature of physical aging of many synthetic amorphous polymers and blends [242,242a] and is aconsequenceof the glass transitionkinetics. Glasses always exist ina
Starch
nonequilibrium state and relax toward a lower-energy state upon annealing at sub-T, temperatures [201]. The short-time portions of structural relaxations in the glass reach equilibrium rapidly, even far below TB,while longer relaxations continue for very long times. A direct consequence of annealing at sub-T, is a shift of the relaxation time distribution to longer times. The rate of relaxation during annealing is markedly dependent on the state of the polymer when annealing commences, e.g., cooling rate and thermal history of the sample prior to annealing. The endothermic effect can be manifested either as a distinct sub-T, peak, when aging occurs at temperatures far below T,, or as an enthalpy overshoot at TRY whenaging takes place at temperatures close to the glass transition [242,242a]. Overall, the magnitude of the sub-T, endothermic peak provides a quantitative measure of the enthalpy relaxation that has occurred during annealing of the glass at temperatures below T,. For amorphous starch-water systems, the appearance of the sub-T, endotherm is more pronouncedwith higher moisture contents and annealing temperatures [216,240,241]. Further to the plasticizing action of water (entropic mechanism), specific interactions (energetic associations) between water andthe hydroxyl groups of the amorphous carbohydrate matrix (i.e., establishment of a long-range hydrogen bonding network upon aging) were suggested as contributing to the sub-T, endothermic event [240,241]. However, in the recent DSC study of Thiewes and Steeneken [243] on low moisture (16%)potato starch it was conclusively demonstrated thatthe subTB endotherm of amorphousandnative starch has its origin in enthalpy relaxation rather than in the melting of carbohydrate-water interactions. It was noted that the T, of potato starch granules is partly obscured by the sub-T, endotherm. M e r erasing the thermal history of the granules (at 16% moisture) by a veryshort heat treatment at 90°C (temperature slightly above the sub-T, endotherm) and rapid cooling of the sample, a distinctglass transition for the granules was observed on rescan, with an onset at 80°C. This T, was much higher than that for amorphous starch (T, 40°C) of the same moisture content, presumably due to motional restrictions imposed by the crystallites in native starch. In addition to water and sugars, plasticization of starch can be also effected with other low-molecular-mass compounds. A number of studies have been carried out with the aim of producing thermoplastic materials; i.e., starches have undergone thermomechanical transformation in the presence of plasticizers other than water (e.g., glycerol), leading to destructurization and frequently depolymerization [244-2461. The mechanical properties [216,231,232], fracture behavior [245,247-2491, and other physical [232,244,250] of starch extruproperties (density, textural attributes, etc.) dates are dependent on processing parameters (amount of plasticizer, ternperature, shear), cooling regime (i.e., how fast the polymer matrix reaches
-
its TRas it cools down), andthe state of the end product; thislast is controlled by the extent of starch plasticization with water or other polyhydroxy mmpounds. Thus, with increasing moisture content, the fracture mechanism of starch extrudates changes from a rapid, brittle fracture to slow, plastic fracture (tearing) [247-249,2511; fracture stress also decreases with increasing water content (8-20%) [247,248,251]. Coplasticizing solutes (sugars, poly01s) also decrease the flexural modulus and fracture stress of thermoplastic starch at any given water content [231,245,251]. At high temperatures and low water content during extrusion, conditions leading to a high T, for the starch extrudate, the material (foam) solidifies more quickly as it emerges from the extruder's die, thus yielding a low-density product [232]. In this respect, it has been shown that a rapid setting of the foam also favors the formation of nonequilibrium structures; e.g., for the V-amylose complexes, The amylose comthe Eh form is preferredcomparedto[128,129,232]. ponent at a level of 5-20% provides elasticity and crispness to extruded products [252], whereas maximum expansion of starch extrudates is observed at50%amylose content [253].Moreover, the tensile strength of starch films decreases and elongation at break increases with the amount of plasticizer [254,255], while the strength of water- or water/glycerol-plasticized films increases with the amylose content [255]. Gas permeability data for starch films indicate that incorporation of water and sugars results in extensive plasticization of the polymer matrix and enhanced diffusion rates of gases 12171. Inflections in the gas permeability and diffusivityplots versus 1/T (K) provide an estimate ofthe TRfor water-plasticized films made from starch [217] or blends of starch with other biopolymers [217a7217b]. Thermomechanical analysis (TMA) [256] and DMTA [257] have been used to study the viscoelastic properties of bread, a composite two-phase system. The moisture dependence of TRwas similar to that of pure amorphous starch and gluten [212,249,258,259]. The depression of T, upon hydration was about lO"C/% moisturebetween and moistureand 5"C/% moisture between and 20% moisture content [256]. At the moisture content of bread, water exerts its full plasticization effect on the composite polymer matrix, bringing the effective T, at about -10" to -12°C [256,257]. Over the past decade, research on the glassy behavior of starch and starch-based products has undoubtedly increased our understanding about the behavior and stability of this polysaccharide during processing and storage. The phenomenon of glass transition has been receiving considerable attention because of its pertinence to the structure, mechanical properties, and kinetics of physicochemical changes this polymer undergoesas it passes from the glassy to the rubbery state. Even more important is the recognition that water andother low-molecular-weight solutes (e.g., sugars) are effective
plasticizers of starch, whereby lowering its T,. As has been advocated in several reviews by Slade and Levine [199,200,206,210,260], this has many implications on the structure, physical properties, andother quality attributes of the end product. For example, baked wheat dough products, immediately after baking and during cooling-dehydration,undergotransformations through a continuum of nonequilibrium rubberystates (starch and gluten) to leathery and possibly to a glassy state, depending on the composition of the product (sugar and/or moisture content). Such transitions are accompanied by drastic changes in the mechanical properties (texture) and stability of the composite network. Moreover, many processed-cereal foods (e.g., breakfast cereals, biscuits, and wafers) have a moisture contentin the range where the glass transition is close to storage temperatures. Thus, small deviations in moisture content of the product or its temperature could bring about the transformation of the metastable, solidlike amorphous matrixto the unstable rubberlike state where major changes in the rheological properties of the product occur. The result is an undesirable texture that maybe perceived as a loss in crispness or crunchy texture. It has been also shown that changes in local viscosity with temperature or diluent-plasticization have an effect on the rate of diffusion of small molecules through the polymer network structure [217]. The importance of recognizingthe Tgdepression by diluents and the need to identify an operative (effective) glass transition temperature of starch-based products lies in the control by T, over processes such as annealing, gelatinization, and (re)crystallization of starch [l-4,191, 194,197,199,2001. All these phenomena can proceed only within the temperature range defined by the T, and T,,,;below T, crystal growth practically ceases, while above T,,, the melting rate is greater than the crystallization rate.From the perspective of stability andshelf-lifeextension, it is also important to note that the temperature dependence of the rate of any diffusion-limited relaxation processin the rubbery zone does not obey the typical Arrhenius kinetics, but instead follows the Williams-Landel-Ferry (WLF) [261] equation [206,210,238,260,262]:
where uT is a shift factor, T is the test temperature, Ts is a reference temperature, and C , and C , are constants. If the glass transition temperature is selected as the reference temperature, and viscosityis chosen as the material property the WLF equation becomes
in the WLF kinetic domain(attemperatures,
T, between TB and
-TB
+
Blliaderls
100°C), the log q or log k (where k is the rate of any relaxation process) depends on AT (=T - T,). According to this relationship, relaxation times or rates could change by a factor of 10 for every 3"C, whereas the Arrhenius behavior (for a typical kinetic response deteriorative processes in food materials, Qlo = 2) requires, for the same change inrate,atemperature change of -33°C [260,263]. Manipulation of T, (via control of moisture or product formulation) in relation to storage conditions (temperature, relative humidity environment) has been suggested as means of maintaining quality and extending the shelf life of food products [206,260,263-2651. This is found in practice for pasta, extruded and other thermally processed cereal products (low-moisture systems having an elevated T,), and frozen items where freezer temperatures are kept below the effective T, of the product.
B. Annealing, Solid-state Transformations and Melting Transitionsof Native Starch Starch granules, being partially crystalline entities, are amenable to reorganization (annealing) during heating at temperatures above T, and below the equilibrium T, of the crystallites. Heating granular starch under these conditions, in excess water, enhances chain mobility and thereby may cause changes in the crystalline phase toward more organized structures of lower free energy (larger and more perfected crystallites). The first observations of the effects of annealing (72 h/SO"C) on wheat starch [266], using the Kofler hot-stage microscope, were an increase in gelatinization temperature and a narrowing inthe gelatinization temperature range.These findings were confirmed later by DSC experiments [186,209,267-2721. Depending on the annealing temperature and time, there might also be an increase in the gelatinization enthalpy of the annealed starch granules [186,267-269,2722761, implying a net increase in the level of short-range molecular order. However, if the temperature annealing exceeds a certain limit, there is reduction in the apparent AH values, presumably due to partial melting of the less thermostable crystallites or granules [209,268,271,277]. Long-term annealing is also accompanied by aloss the intercluster distance (-9 nm) observed with S A X S [89,271], a substantial loss in long-range radial order (birefringence) [271], and no apparent change [209,271] or a slight increase [278] in crystallinity as assessed by WAXD. The unchanged positions the d-spacings of annealed potato starches indicate that the B structure remains the same during the annealing process [276]. The dynamic responsesof structure to various temperature-time-solventconcentrationregimesto which granular starch is exposed prior to gelatinization may be of industrial significance. For example, wet milling corn involves steeping of kernels for 24 h in water (containing 0.2% SO,) at 40-50°C; these conditions are
adequate to modify the structural domains of the granule by annealing. Air or vacuum-oven drying of starch suspensions may also improve granular order, as shown for wheat starch by DSC and X-ray diffraction [278]. VIScoamylograph curves for annealed starches usually show increased viscosities upon cooling of the paste. However,the observed changes in the pasting properties and leaching behavior of amylose, as a result of annealing, vary with the source of starch and the hydrothermaltreatmentemployed [272,279]. A related hydrothermal process for structural modification of granular starches is that involving heat treatment at lower water contents (18-27%) and higher temperatures (95-110°Cfor 12-16 h). Such heat-moisture treatment induces major structural alterations and modification in the physicochemical properties of granular starches [280,281]. In cereal andtuber starches, heat-moisture treatment increases the gelatinization temperature, water-binding capacity, stability of starch pastes to heat and shear, and, in most cases, granule susceptibility to enzyme attack [280-2851. The same process also decreases the swelling power and, for most starches, the hotpaste consistency and solubility,due to reduced amyloseleaching [281,284]. These effects are dependent on the moisture content (greater at 27% moisture) during thermal treatment and are particularly pronounced with tuber starches. Electron microscopy revealed a large, hollow region at the center of the heat/moisture-treated granules of potato and corn starches [285], implying major structural rearrangements of the granular material. At a molecular level, X-ray diffraction diagrams indicate a transformation of the Btype crystalline lattice of tuber starches towards the A-typepolymorph, whereas cereal starches show the development of well-defined V structures On the other hand, the characteristic d-spacings of A-type crystalline domains in heat/moisture-treatedcereal starches do not show any change, suggesting that chain packing remains the same in their granules on hydrothermal treatment. Donovan et al. [l851 have examined heat-treated (100°Cfor 16 h at 18, 21, 24, and 27% moisture content) potato and wheat starches by calorimetry. Withexcess amount of added water during DSc, the granules showed a progressive shift of the melting endotherm toward higher temperatures, compared to the untreated samples, with increasing moisture content. There was also a change from a single cooperative melting endotherm to a broader biphasic transition (at 27% moisture), indicating chain reorientation in starch crystallites on hydrothermal treatment. Defatting before the heat treatment resulted in sharper peaks and a narrower temperature range for the biphasic melting transition [MS]. The A” or “A type” was polymorphic transformation of “B type” to “B recently studied by calorimetry and X-ray diffraction [286] using short amylose chains (potato starch lintners with DP 15). At a water content above
+
20% (d.b.), the B-type potato lintner showed a small endotherm (T,’ Fig. 9) preceding the main melting peak (‘M,). This small endotherm (at 90100°C, AH J/g) was absent in similarly heated A-type lintners. The structural origin of the ‘T’ endotherm was identified as corresponding to the polymorphic transition “B-” to “A-type,” which involves a change in the packing arrangements of helices in the crystal lattice. This interpretationwas corroborated by X-ray diffraction measurements performed onsamples subjected to heat treatments at successively increasing temperatures (e.g., 35% H,O d.b.,Fig. 9). Below20% water content, the ‘T’ endotherm was no longer observed in the DSC curves, and there was no evolution of the Btype &spacings in the X-ray diffraction patterns of the thermally treated lintners up to temperatures where thermal degradation occurred. Obviously, a minimum water content of -20% is required to facilitate the structural transition from the hexagonal E-typelattice to the more compact,monoclinic A-type lattice. model for the solid-state transition of B starch to A starch, involving the progressive removal of interhelical water and a unidirectional slipping of the chain duplexes (Fig. g), was proposed earlier by Perez et al. [287]. The changes in the physical properties of heat-treated starches under limited water conditions have not been exploited commercially to a large degree. A heat treatment process of soft wheat flours (12O0C/1O min at 10% moisture) has long been known to improve cake volumes and crumb scores, similar to the effects brought about by chlorination of cake flours [288-2901. Although the exact mechanism for the improvement in cakebaking performance of heat-treated flours has not been yet elucidated, it is likely that this behavior is related to structural alterations of the starch granules and to changes in their surface chemistry (i.e., modification of surfacebound proteins andlipids). As pointed out byColonnaetal.[281],an increase in the gelatinization temperature, obtained by hydrothermal treatments, could be of advantage in thermal processing of some foods. For example, starch swelling and solubilization would be slightly restricted, thus affecting the competition for available water with the denaturation process of proteins in a composite food matrix; this in turn may have implications on the structure development and textural attributes of the end product. On heating aqueous suspensions of starch granules, the optical properties of starch (e.g., birefringence) and its X-raydiffractionpattern are retained, until the gelatinization temperature is reached. Above this temperature, there is disruption of starch granule structure and loss of molecular order (loss of birefringence,crystallinity,and periodicities observedby S A X S and WAXD), irreversible swelling of the granules, amylose leaching, and increase in viscosity. All the irreversible physical changes accompanying the disordering process are collectively known as gelatinization. The most
-
Polymers
c
-
a
6VC IOO'C 112'C d 135'C e 152'C
The "B-"to"A-type"transition for B-type potato starch lintner @P 15) at 35% water content (d.b.). The mows on the DSC thermal curve specify the temperatures at which the samples were heated prior to X-ray analysis; the model is also Perez et al. [287] for the solid-state polymorphic transition ''B''+"A'' given, illustrating the progressive removal water molecules (small dots) and the change in packing of chain duplexes. (Adapted with permission from Refs. 286 and 287.)
widelyused technique in studies of starch gelatinization is DSc, which reveals several endothermic events during heating of aqueous suspensions of granular starch. Figure 10 shows a typical thermal profile of rice starch (22% amylose) heated at 50% (w/w) moisture content. Although there is a diversity of opinion regarding the origin of the low-temperature (
l
40
I
90 Temperature ("C)
-.
A typical DSC thermal curve solids) of a cereal starch showing the different melting transitionsand the corresponding structural domains undergoing a phase change.
Starch
The melting behavior of starch crystallites, manifested by the M , and
M 2endotherms, has been followed as a function of water content for many granular starches of different botanical origin [183-1857188,191,209,2917 m i c a 1 DSC thermal for a waxy rice starch of varying water content are shown in Fig. 11. For water contents greater than single endotherms are usually observed, indicative of cooperative melting. However, as the water content is reduced, the thermal profiles reveal multiple
" ""
T,
T,"
Volume
40
.
80
AHu
V,
H20
v1 I
1 .200 Temperature ("C)
11 DSC melting profiles a waxy rice starch at various weight k t i o n s starch solids; inset shows a plot the melting data according to Flory theory.
endotherms, implying that the granular structures respond differently in lowmoisture environments.The development of the M 2transition at intermediate water levels and its progressive shift to higher temperatures as the moisture content decreases have led to several hypotheses for the structural origin of the observed peak multiplicity in the thermal profiles [2,4,198]. First, Donovan [l831 proposed that, in excess moisture, crystallites melt cooperatively as a result of the tensions exerted by the neighboring amorphous regions on extensive hydration and swelling; this yields the MI endotherm (frequently referred to in the literature as the G endotherm). He has graphically described the disordering process as "stripping" and unfolding ofstarch chains from the crystallites due to the swelling of the amorphous chain segments. As water becomes limiting, only partof the crystallites destabilize with this mechanism, while the remaining give rise to the second endotherm, M2,in accordance with the Flory-Huggins theory of polymer-diluent interactions [300]. This theory, which is based on equilibrium thermodynamics, describes the depression of the equilibrium melting point, p, of a polymer to a new value, T,, as a function of the volume fraction of the diluent (solvent), U,:
where V, and V, are the molar volumes of the polymer repeating unit and diluent, respectively, AH,, is the enthalpy of fusion per repeating unit, and x is the Flory-Huggins interaction parameter, whose value is determined by the solubility of polymer and diluent in one another. Since this theory applies only to equilibrium crystals, its application to phase transitions of starch-water systems has met only with limitedsuccess. As with other partially crystalline polymers, moststarch structures exist as metastable states, which are amenabletoperfection(annealing)upon plasticization with water and thermal treatments [4,191,209]. According to Lelievre [301,302], equilibrium conditions in heated aqueous starch systems can be approached only under very slow heating rates (-1"C/3 h), far below those commonly employed in DSC experiments. Slade and Levine [3,208,211] have questioned the Flory-Huggins treatment of DSC melting data of starch on the grounds that true equilibrium conditions are not met during gelatinization and that melting of starch crystallites is controlled by the glass-rubber transition ofthe amorphous regions. Even with highly crystalline preparations of A- or B-type starch lintners @P 15), Whittam et al. [303] suggestedthat estimates of T: for starch crystallites, using the Flory-Huggins approach, may be somewhat low; with granular starch, the amorphous material would have a greater depressing effect on crystallite perfection and the melting temperatures. Despite its theoretical limitations, the Flory analysis (as illustrated in Fig. 11, inset) is useful in comparing the
-
Starch Polymers
thermal stability of different starch materials and in allowing estimation of their apparent Tmunder dynamic heating at various moisture conditions. An alternative explanation for the biphasic endothermic events at intermediatewatercontents was given by Evans andHaisman who suggested that crystalline zones in different granules vary in their thermal stabilities. Granules with the least stable crystallites melt cooperatively first (Ml), and the disorderedpolysaccharide chains absorbmorewater. This means that the remaining crystallites and granules have less water available (effective volume fraction of diluent is reduced) and, therefore, will melt at a higher temperature (M2). They have also applied the Flory theory and, by making a series of substitutions and simplifying assumptions for aqueous solutions of small-molecular-weight solutes, derived a relationship between T,,,, a,, and v1 for ternary starch-solute-water systems:
Although this relationship can generally predict the direction and relative magnitude of the effect of simple solutes (NaC1, CaCl,, glycerol, sugars), it cannot account for specific solute effects, e.g., interactions between starch and certain ions. This view has subsequently been supported by Liu who claimed that the positions of melting endoand coworkers therms in DSC thermal curves are governed by the melting of granules with different thermal stabilities, heated at continuously changing volume fractions of available diluent. According to Slade and Levine at the leading edge of the first transition (Ml) there is a change in heat capacity, attributed to the glass transition of the amorphous phase of the granules; completion of the glass transition permits the crystalline domains to undergo a nonequilibrium melting process,giving rise to the second peak (Mz). This postulate has been challenged on the grounds that the observed heat capacity shift occurs throughout the temperature span of both endotherms Other interpretations for starch structure loss in limited water systems invoked crystallite disruption followed, at a higher temperature, by doubleor disordering of double helices associatedwith helixmelting short-range order (Ml) and followed by melting of crystallites (M2) These latter models, however, are not consistent with the findings that both double-helical order (assessed by solid-state 13C-NMRor DSc) and crystalline structure (X-ray dieaction) are lost concurrently during heating for Recently, mostgranular starch systems examined Svensson and Eliasson attributed the biphasic endotherm to a slow plasticization of the amorphous granular regions under restricted water conditions,which forces the melting of crystallites tohighertemperatures.
Tomka [W] has examined the structural transitions potato starch in the range of 10-20% moisture. At 18% water content, the DSC tracing showed four endothermic transitions, denoted G (at "60-70°C), S, (at llO°C), S, (at lSS"C), and H (in the range 165-200°C). According to the work of Thiewes and Steeneken [243], the G transition corresponds to the sub-T, endotherm as a result of enthalpy relaxation of the amorphous material. On the other hand, the melting process of the crystalline domains was attributed to both S, and S, (i.e., M,and M,) transitions [244]. Although in all of the preceding models gelatinization was treated as a solvent-assistedmelting of crystallites, the fact that gelatinization is subject to kinetic limitations, due to the complex morphology the partially crystalline starch granules, has often beenignored.MarchantandBlanshard [307], using a small-angle light-scattering device, have considered the kinetic constraints of gelatinization from the viewpoint of three consecutive processes: (1) diffusion of water into the granule; (2) melting of crystallites; and(3) swelling of the granule due to increasedhydrationof the disentangled polymer chains. Temperature jumps of variable size, in conjunction with birefringence measurements, revealed that only melting and swelling exhibit time dependency. It was also suggested that within partially gelatinized granules, rearrangements the polymer chains in the amorphous phase and the remaining crystallites might occur. In view the inherent molecular heterogeneity and nonequilibrium nature of crystallites in starch granades[3,4,191,207-2091, the interdependence between amorphous and crystalline domains [4,191,194],and the thermalbehavior ofV-amylose complexes .[134-137,139,140], we have proposed that the multiple melting profiles observed during heating of starch in limiting water contents may reflect melting and reorganization processes occurring concurrently in a dynamic DSC experiment [4,191,197]. In this respect, the MI and M2transitions (Fig. 10) arethe direct manifestation composite thermal effects due to partialmelting(endothermic)andchainreorganization (exothermic) events and, therefore, the observed gelatinization behavior is governed by nonequilibrium factors (crystallite size, perfection, timescale of the process, etc.). Upon water plasticization of the amorphous granular regions, at temperatures .above Te where chain mobility is greatly enhanced, andfollowing partial melting of small or more imperfect ordered domains, reorganization of chains would be favored, because the temperature is still below the melting point of equilibrium crystals.Such structural reordering is rather shortrange scale, undetectable by X-ray diffraction. Certainly, this interpretation does not preclude any possibility for development water gradients in the sample during heating, which could also affect the melting process of the more resistant granules or crystallites due to changesin the effective diluent conoentration.
Starch
There is some experimental evidence to substantiate this latter view on the origin of the Ml and M2 transitions for granular starch. First, removal of the intercrystallite amorphous material of granular starches by acid etching (lintnerization) eliminates the biphasic melting behavior and broadens the transition [184,294,308,309]. The acid-resistant granular residues exhibit a broad, single melting endotherm at intermediate water contents, despite the heterogeneity in crystallite size. Such response would be expected, conbe verylittle sidering that after removalof the amorphous material there chance for reorganization ofthe remaining ordered structures during heating. The calormetric findings of Donovan [294,309], on purified and recrystallized waxy amylodextrin fractions, are also consistent with this notion. At evireduced water conditions (solvent volume fraction range dence for multiple melting transitions was seen only for multiple branched chains in which a substantial amount of nonordered material wouldbe pressingly branched dextrins ent. In contrast, crystallized fractions of linear of short DP, presumablyhavingvery little portion of disorderedchains, exhibited only single, broad endotherms. Second, there is variation in the melting profilesas a function of heating rate [191]; the Ml and M2 transitions (Fig. lo), seen at heating rates between 3" and 20"C/min, mergeinto a single endotherm at higher heating rates. As the heating rate increases, and because reorganization is time limited, melting will occur as a single-stage process, Ml. However, changes in resolution the DSC signal with increasing heating rate as well as sample size maybe contributing to the shape of the thermal traces, as argued by Liu and Lelievre [198,310]. Finally, the very sharp peaks often seen at the concluding end of the thermal curves of granular starches low moisture content [198,209,244,311] (e.g., Fig. 11, starch weight fraction of 0.6-0.8) provide additional evidence for melting of annealed structures. An appropriate and crucial experiment to test this hypothesis further would be to "freeze in" the preexisting morphology ofthe starch granule by mild crosslinking, hence restricting chain mobility, which is a prerequisite for reorganization during heating. The temperature interval over which loss in structure occurs during heating of starch granule suspensions in excess water has been the subject of several investigations. For waxy maize starch, residual birefringence was consistently at a lower level than extent of crystallinity (X-ray diffraction) or short-range order (DSC, solid-state l3C-MMR) [312], whereas for corn starch decreases in crystallinity commenced before birefringence began to disappear andcontinued after all birefringence was lost [304]. With the possible exception of potato starch, other granular starches exhibit a parallel loss of crystalline and molecular order [108]; for potato starch granules, complete loss in crystallinity occurs at a lower temperature than that for disappearance of short-range order (DSc, 13C-NMR) [108,149].
Biliaderis
Attempts tocompile
DSC gelatinization dataofnative starches from the same or different botanical origin, are of questionable significance if one considers that, besides the granule structure organization effects, the melting transition parameters (T,,,, AH) are influenced by heating rate, moisture content, mechanical damage, thermal history of the sample (annealing effects), extraction conditions of starch, etc. According to the calorimetric studies of Shiotsubo and Takahashi [319] on potato starch, the gelatinization peak temperature increases with increasing heating rate (superheating effect). It was also shown that only at heating rates below O.S"C/min (well below those found in conventional DSC studies), the melting peak temperature remains constant, thus approaching equilibrium conditions. As to the structural origin of the DSC endothermic enthalpy values, the general consensus is that they reflect primarily loss of double-helical order rather than loss of crystalline register [108,303,320]. This implies that the forces responsible for structural stability of starch granules are largely at the double-helical level and that chain packing energy contributions are very small. For highly crystalline preparations of A- and B-type spherulites, obtained by crystallization of aqueous solutions of potato starch lintners (DP 15) underdifferentconditions, the DSC melting data indicated a surprisingly similar enthalpy valuefor the two polymorphs (-35J/g) and a difference in melting temperatures of 15-20°C at a fixed water content [303]. The more closely packed A crystals, possessing a more stable structure [94], had a higher T,,, than the less densely organized B polymorph; in excess water, the B spherulites melted at 75°C. Despite the observed difference in T, between the model crystalline materials, melting temperatures of granular starches do not necessarily follow this rule; e.g., wheat starch granules (A type) usually exhibit lower melting temperatures Obviously, than those of potato starch (B type) crystallite size and perfection of ordered chains as well as the depressing influence of the amorphous domains have a major impact on the thermal stability of granularstarch.Reported gelatinization enthalpies of native starches are generally in therange 5-20 J/g. It is perhaps worthcommenting that the apparent gelatinization enthalpy of granular starch represents net thermodynamic quantities of different events: granule swelling and crystallite melting(endothermic),hydrationand chain reordering(exothermic) [185,191]. There is generallyagoodagreementbetween DSC transition temperaturesandbirefringenceend-pointtemperatures of native starches [184,191,315,317]. Large variations in DSC melting parameters (AH, transition temperatures) among different genotypes of corn [186,314,316,317, 322-3261, rice [269,315], barley [124], amaranth [327], sorghum [328], legume [184,296,329], and potato [330] starches have been also reported.
-
Polymers
For starches of similar genetic origin, handled under identical processing protocols to minimize contributions from annealing effects, amylose content does not seem to correlate with T, or melting enthalpies of starch tallites [315].Most studies involving thermalproperties of corn starches have concentrated on the effect of mutant endosperm genes, such as waxy amylose-extender dull (du), and sugary-2 (S&). Forexample, among three wx-containing genotypes and du the had the highest AH and gelatinization temperature [325]. The amylopectin fraction of the wx genotype was found to contain a high proportion of longer chains, which can account for the B-type crystallinity this starch as well as its elevated T,. Moreover, starches from corn mutants with the gene frequently show broad endothermic peaks or even a double melting transition for starch crystallites in excess water, indicative of heterogeneity ordered structures inside their granules [325,326].Incontrast, the allele in corn results in starches with lower gelatinization temperature and melting enthalpy than normal starch [323,324]. Environmental factors may also influence the thermal properties of starch from corn [331], wheat [332], and potato [330] genotypes. Finally, the loss of structural integrity when starch [333] or flours [313,333,334] are subjected to shear or compressive forces (e.g., milling) results in a reduction in transitiontemperatureand melting enthalpy of the mechanically damaged granules; the overall loss in order, as measured by X-ray diffraction, DSc, and solid-state "C-NMR, is dependent on the severity of milling conditions and milling time [333,334]. Starch gelatinization is also influenced by the presence of small-molecular-weight solutes (nonionic and electrolytes) and hydrocolloids. Understanding these effects is important for better process control and for improving the texture and other quality attributes of starch-based products. In general, increasing concentrations of sugars and other polyhydroxy compounds are known to impede granule swelling, raise the temperature of gelatinization (Fig. 12), and elevate the temperature viscosity rise (pasting) [187,188,335-3411. For example, at the concentration used in cakes (55-60%), sucrose delays gelatinization wheat starch from 57" to 92°C [335,339]. Furthermore,SEM of granules isolated from high-sucrose-content baked products indicates decreased granule deformation, compared to products of low sugar level [342,343]. There might be also restrictive effects on the extent of conformational disordering upon gelatinizationof wheat starch as impliedby the reducedenthalpy values in the case of sucrose [187,336,339], glucose, or fructose [335,339]. However, in other studies the AH has been reported to be unaffected [l881 or even increased [340,344]. There have been several interpretations for the influence of sugars in delaying starch gelatinization. These include competition for water between starch and sugar (lowering of [345], sugar-starch interactions [302,338],
Billaderis
350 -
370
sucrose 2 glycerol
3 ribose
330
m 20
--
Concentration (%
C
.L
al
r
350 rn
330
I
2
3
4
Molarity (M) 12 The effect of hydroxycompoundsandneutralsaltsonthemelting transition of potato starch (10%wlw in water). (Adapted with permission from Ref. 188.)
and more recently an “antiplasticization” mechanism by the sugar-water cosolvent [3,199,211]. The antiplasticizing effect of sugars has been associated with a decrease in free volume, relative to the plasticizing action of water alone, i.e., the plasticizing cosolvent with a greater molecular weight than water itself is less effective in increasing the free volume and in depressing the T, of the amorphous material in starch granules;itthereby increases the gelatinization temperature. For ternary starch-sugar-water systems, Slade and Levine [3] presented linear relationships for the dependence of gelatinization temperature on the amount of sucrose and the inverse molecular weight of the cosolvent (water + sugar) using a series of sugars as cosolvents. The N M R data of Chinachoti et al. [344] also showed that water mobility in a starch-water system, as measured by ”O relaxation times (T2),decreased drastically by the addition of sugar. It was then suggested that such reduced mobility of
water in the presence of the sugar may play a role in lowering the effectiveness of plasticization of starch by the cosolvent. Attempts have been even made to explain and predict the thermal responses of granular starch on purely thermodynamicgrounds by using an extension of the Nory equationtoathree-componentsystem(water-starch-sugar)[2,188,302]. Although this approach appeared to provide a convenient framework for analyzing starch-melting data, its development is based on equilibrium melting and on making simplifying assumptions regarding the magnitude of interaction parameters among solvent, solute, and polymer. However, in view of the nonequilibrium nature of starch gelatinization, as discussed earlier, as well as the uncertainty concerning the role of solute on processes like annealing, such treatment of gelatinization data would be inappropriate. As to the qualitative aspects of starch gelatinization in limited-water systems, the double melting endotherm of starch crystallites (Ml and M,) is changed into a single, narrower transition with increasing sugar concentration, implying a more cooperative melting process [340]. Hydrocolloids at low concentrations (0.5-2.0%), despite a markedincrease in the viscosity of the composite gel matrix[346,347],causevery little change in the DSC gelatinization parameters (AH, T,) of starch [347-3491; at high concentrations, the effects of hydrocolloids on phase transition behavior of starch are similar to those of sugars at equivalent concentration [350]. Electrolytes exhibit more complex behavior than nonionic solutes, as illustrated in Fig. 12 [188]. With increasing salt concentration, NaSO, and Na,HF'O, progressivelyincrease the gelatinization temperature, whereas NaCl and CH,COONa show different effects. For potato starch, the gelatinization temperature initially increases and then decreases as the concentration of NaCl and CH,COONa increase [188]. Granules of A-type starches are more resistant to the decline in their T, as the concentration of NaCl is raised above 4M, presumably becauseof their more compactstructures than tuber starches [311]. A similar trend was also shown for CaCl,, which at intermediate concentrations (-3 M) brings about swelling and gelatinization of starch granules at room temperature.Starch granule suspensions in >4 M CaCl,exhibit exothermic transitionsonheating,which suggests that the starch is dehydrated at these salt concentrations and that, on melting, the exothermic process of hydration obscures the endothermic event of crystallite structure disruption [188]. In general, the effect of neutral salts on starch gelatinization follows the order of the classical Hofmeister (lyotropic) series, particularly in the case of anions [188,351]; cations of different chloride salts exhibit a more complicatedbehavior, as evidenced by polarizing microscopy[352].According to Oosten [353], who viewed starch as a weak acidic ion-exchanger, anions are the actual gelatinizing agents, whereas cations exert a protective
Billaderis
effect on granule structure by generating a negative Donnan potential. Jane [354] has attributed the electrolyte effects on starch gelatinization to:(1) indirect effects of the ions on water structure (enhancement or disturbance of the hydrogen-bondednetwork of watermolecules,depending on the charge density and size of the ion); and (2)electrostatic interactionsbetween the ions and the polymer chains. Undoubtedly,additional information should be acquired to elucidate fully specific interactions between ions and starch and thus predict the direction andmagnitude of salt effects on starch gelatinization. A physical modification of starch, characterized by a change in molecular order while maintaining its granular form, is the production of granular cold-water-soluble (GCWS)starches, which give pastes in coldor warm water, comparable to those of “ c o ~ k - u p pregelatinized ,~~ starches; i.e., they provide an “instant” paste without heating. Further to the development of an injection (atomization) and nozzle spray drying process of starch slurries [355], GCWS starches can (15-50% w/v) at high temperatures (-150°C) be prepared by several other methods: (1) heating starch in aqueous monohydric alcohol solutions (75%alcohol,w/w)athightemperatures (150170°C) under pressure [356,357]; (2) heating starch in aqueous polyhydric alcohol (e.g., propan-l,2-diol) solutions at elevated temperatures (>115”C, atmospheric pressure) and exchanging the solvent with ethanol [358]; and (c) treating starch in a slurry with alcoholic alkali solutions at low temperatures (25-35°C) [359]. The transformation of native or chemically modified granular starch to a GCWS product upon heating in an alcohol/water mixture involves melting of crystallites and, depending on starch composition and the alcohol used, formation of helical V-type commolecular structure plexes [357,358]. Indeed, the X-ray diffraction diagrams of GCWS starches show the V-pattern, except for GCWS-waxy maize and GCWS-chemically modified starches,which give an amorphous profile [360-3621.The aqueous alcohol medium used during thermal treatment restricts swelling and molecular dispersion of the granules, although it facilitates melting of crystallites. There is also enough mobility in the system to foster complexation of starch chains with the alcohol (ligand) on cooling. The development of such single helical structures as well as chain entanglements between amylose andamylopectinmayhelp to maintain the granularform of the GCWS starch. Cold water solubility of these materials was explained by the conversion of the double-helical crystalline domains in nativegranules into single helices; single-helical amylose and amorphousstarch have been reported to be water soluble at 25°C [95]. Dispersibility in cold water, smoothness of gel, paste consistency,and stability tofreeze-thaw cycles of GCWS starches vary with the type of starch and the temperature-solvent conditions employed for their preparation [361,362].
Starch
Attempts have been made to monitor phase transitions of starch in complex food systems, where, due to the presence of various thermally responding components, the DSC curves may become complicated. A DSC study of the effect of cake ingredients on starch gelatinization was carried out by simulating the baking conditions of angel cake [363].It was shown that high sucrose levels are required to elevate the transition temperatures of starch and egg white proteins to the same temperature region and thereby to maximize the cake volume. The effects of sucrose, salt, and other bread and cookie dough ingredients on starch gelatinization were also reported [337,364-3671.With multicomponent systems, where the various constituents undergo thermal transitions in the same temperature zone, the assignment of endothermic transitions to individual components may require their thermal characterization separately; e.g., during thermal processing of gel-type seafood products (surimi), four melting transitions proceeding independently have been identified by DSC and attributed to the thermal denaturationoffish proteins (three)and the gelatinization of starch [368]. Wheat gluten, lacking any denaturation endotherm, is suitable to examine the influence of added protein to starch gelatinization; at a constant waterto-starch ratio, the gelatinization temperature of wheat starch increased with increasing amount of gluten [366].
C. Gelation and Retrogradation of Starch The ability of starch polymers to form ordered structures upon cooling of their aqueous dispersions, via interchain associations, is a critical step for the setting of hydrated three-dimensional gel networks and the development of texture for thermally processed products. Formationof tertiary structures is due to the structural regularity of &-(l-4) linear glucans and may involve both short- and long-range order, depending on the extent of lateral associations between ordered chain segments. These structures constitute what are known as crosslinks, or junction zones, in a gel network. Interconnecting single chain segments between the double-helical junction zones are relatively more mobile, whereas spaces not filled by the polymer chains are occupied by the solvent. In physically crosslinked systems, such as starch pastes and gels, the density and stability (related to the size and perfection of ordered chain microdomains) ofthe junction zones govern the mechanical properties of the network and its responses to applied stresses or to changes in temperature and solvent quality. Starch gels, in particular, are metastable, nonequilibrium states and undergo structural transformations (chain aggregation, crystallization) during storage. Thus, any examination of starch gel structures and physical properties must be considered in the context of temperature- and time-dependenceof gel-curing events. The crystallization pro-
cess of starch gels, expected to occur only between T, and T,, can also be viewed as following the classical three-step mechanism for crystallization of synthetic polymers: (1) nucleation, (2) propagationor crystal growth, and (3) maturation, i.e., continuing slow growth and crystal perfection [3].
and The mechanism of network self-organization from amylose solutions has been a topic of several investigations [47,151,152,369-3731, because the linear polymer of starch is largely contributing to its gelling properties. Kinetic experiments with amylose concentration between 0.3% (below this, amylose precipitates without gelation) and2.0% (above this, gelation is very fast to distinguish any sequential stages of chain organization) are usually conducted to resolve all steps leading to polymer self-assembly from the homogeneoussol.In this respect,many probes of structural order (e.g., turbidity, dilatometry,light scattering, X-ray scattering or diffraction, optical rotation, NMR, viscometry, andsmall strain dynamic rheometry), responding to different levels of macromolecular organization, have been applied. The time evolution of shear modulus (G') for amylose solutions (0.2 M KC1) in the concentration range 1.03-1.78% (at 25"C, 5-10% strain, 5 rad-s"), as shown in Fig. 13 [372], reveals two stages: an initially rapid rise in G', followed by a step of slower increases in modulus (pseudoplateau region). The initial rise in G' and attainment of the modulus plateau region occur over shorter times with increasing amylose concentration [370,372]. The G'@)function is also dependent on amylose chain length. For nearly monodisperseamyloses in the DP range of 250-1100 (at2%solutions, 25"C), Clark et al. [370] observed that aplateau G' value was attained faster with amyloses of shorter chain length. The rheological data also indicated that amyloses of very high DP (2550,2800) exhibit a veryslow development in G' under identical gelation conditions. For such long amylose chains, it is possible that initial formation of relatively few crosslinks significantly retards chain mobility and therebyslows down the gelation kinetics. Inother studies on amylose gels [374], it was shown that a gel rapidly quenched to 25°C (3.4%, DP3080, and acure time of 24 h) had alower limiting modulus of -3.5 X lo3 Pa than a slowly cooled (over 4 h) system that reached at a plateau value of -5.3 lo3 Pa. All these observations clearly point to the dynamic (nonequilibrium) nature of amylose gel structures; i.e., diffusioncontrolled aggregation processes govern the mechanical properties of the hydrated networks. Amylose gelation was noted to proceed even at concentrations below the critical overlap concentration of this polymer (C* 1.5%); a minimum, amylose concentration for gelation (C,) was found to be -l%, regardless
-
200
0
Evolution of shear storage modulus (G') for amylose solutions varying (a) concentration @P 2400, in M KCl, 25°C) @) chain length (2%in water, 25°C). (Data adapted with permission from Refs. 370 and 372.)
-
of the molecular weight [370,372]. Thus, molecular entanglements do not necessarily determine the critical gelling concentration of amylose, as originally proposed byMiles et al. [l521 and often found in the case of synthetic polymers, for which overlap of macromolecules is a prerequisite for gel formation. Besides the formation of an elastic network, amylose gelation is also characterized by the development of opacity, which is generally attributed to chain aggregation [152,370,372]. For a polydisperse amylose preparation (DP3080,2.4%solution, quenchedto 32"C), the increasein turbidity slightly preceded the onset of G' development [152]; on the other hand, crystallization, as detected by X-ray diffraction (intensity of the 100 diffraction peak),was shown to be the slowest process.In similar experiments with
amylose @P 2400) solutions in 0.5 M KC1 at 25°C a fairly good correspondence between cloud time (onsetof turbidity) and gelation time over point of the G' and G'' curves) was observed [372].These findings supported the notion that networkformation in amylose solutions is initiated by phase separation (demixing) in the homogeneous sol, which yields polymer-rich regions interspersed with polymer-deficientregions. This brings about enhancement of local concentration of amylose in the polymer-rich regions and leads to interchain associations; crystallization within the separated polymer-rich phase occurs at a much slower rate than that of demixing. Depending on polymer concentration, molecular size, solvent quality, and quenching temperature, such liquid-liquid demixing may be a relatively slow process. Using both SAXS and WAXD measurements, with synchrotron and conventional X-ray radiation, 1'Anson et al. [369]have probed the gelation of a 6% amylose solution after quenching from 75" to 22°C over short and longer time scales. Their findings suggested if gelation is initiated by a phase separation, this is closely followed by crystallization in the polymer-rich phase. The SAXS data, from use of the high-density synchrotron beam, indicated that nucleation and limited growth of rod-shaped microcrystals occur during network formation, at short times after quenching. [152],the studies of Gidley and coworkers Contrary to Miles et al. [47,370,371]with monodisperse amyloses have shown that turbidity development either precedes or lags behind the increases in G', depending on the amylose chain length; e.g., for amylose of DP 250, turbidity commenced earlier than the rise in G', whereas for amyloses with DP > 1100 the reverse was true. Because gelation was noted even at concentrations significantly lower than thoseleading to molecular entanglements, Gidley [371]suggested that gelation is due to interchain associations in the form of double helices and aggregation of helices that act as junction zones. It is these cooperative noncovalent interchain interactions that bring about a phase separation in the developing network. Moreover, 13CC P M S and 'H T2measurements of amylose gels provided evidence for the existence of two conformational states having different mobilities [371];rigid double-helical chain segments (of B type) andmore mobile, amorphous single chains. Estimates of doublehelix content in 10% amylose gels were 67%, 67%,and 83% for potato (polydisperse), DP 2800 (synthetic, monodisperse), and DP 300 (synthetic, monodisperse) amyloses, respectively [157,371]. recent computer simulation study [373]of the structural features of amylose solutions and gels, using X-ray scattering, has favored the Gidley's gelation model, which assumes chain aggregation and crystallizationduring the phase separation, and confirmed the coexistence of single- and doublehelical segments during amylose gelation and aggregation. The scattering features of defatted amylose solutions (2%) cooled to 40°C indicated at first
Starch
the development of B- and V-type nanocrystallites. These crystallites were not includedin a phase-separated network,supporting the gelling mechanism of Gidley [371]. Following storage of the gel (5 weeks, 21"C), the V-nanocrystallites seemed to vanish and the number and size of B-crystallites grew compared to the freshly prepared gel at 40°C [373]; the B-crystallites most likely grow by dimerizationof extended helices or V-helices, which undergo an accompanying conformational change. The aged amylose networks would thus consist double helices, small aggregates of double helices (junction zones), nanocrystallites (B type), and their aggregates. In Fourier a transform infrared (FTIR) studyof amylose gelation [375], changes in spectra indicated that a fast short-range ordering takes place over a time scale similar to the development of the gel network. Thus, double helices form before or at the same time as phase separation, to create a gel network, with subsequent aggregation to yield crystalline domains. Based on the turbidimetric and rheological data of Clark et al. [370], Morris [376] has proposed that growth and coarsening of amylose gel networks may develop in different ways depending on molecular size, concentration, and gelation conditions. For high-molecular-weight amyloses, poor chain matching and associations over relatively short chain segment lengths occur, favoring the formation of a fine network that coarsens thereafter. In contrast, shorter chains may initially foster lateral interchain associations due to a better matching upon double-helix formation, followed by interlinking of the coarse aggregates to form a network. Once formed, amylose gels are thermally stable networks up to 140-160°C [134]; indeed,the shear modulus of amylose gels could not be reversed by heating at 100°C [151]. The microstructural aspects of amylose gels, such as porosity [156,377], molecular order and crystallinity [176,371], and lengths of chain segments in the ordered regions of the network structure [133,156], have been probed. structural model for the organization of the polysaccharide chains in amylose gels, with crystallite lengths of 8-18 nm, was also presented [156]. The limiting G' value of amylose gels is strongly dependent on concentration. Depending on origin, molecular size, degree of polydispersity, concentration range, and gel-curing conditions, G' was found to vary with amylose concentration as C' (DP 3080, 1.5-7 [374], CY4-'.' @P 300-1100, 1-3 [370], and c" @P 1150, 1.9-8.8 [378]. These different exponent values suggest that a simple power law expression is not sufficient to describe the concentration dependence of gel modulus. masterplot of G' concentration was presented by Biliaderis [193], summarizing published data for amyloses of different origin and molecular size, which by extrapolation tothe concentration axis yielded acritical concentration for The modulus-concentration data for monodisperse gelation of-0.9 amyloses were analyzed with the method of Clark and Ross-Murphy [379],
Billaderis
114
which can give an accurate prediction of the critical gelling concentration, C, [370]. Amylopectin gelation is a much slower process than that observedfor amylose (Fig. 14), and it occurs at substantially higher polysaccharide concentrations (usually >lo%), well above the coil overlap concentration (C* 0.9%) of this biopolymer [75,378,380]. Moreover, the kinetics of amylopectin gelation is more sensitive to storage temperature (1-25°C) than that of amylose. A range of physical, spectroscopic, and chemical techniqueshas
-
(w/w) W-
maize gels
2
54 200 -6
z
zEi 8J
2
20
0
Time (h) Figure Temperaturedependenceofshearstoragemodulus (G’) development forwaxymaizeamylopectinandpotatoamylose gels. (Adaptedwithpermission from Ref. 378.)
been employed to monitor structure development in amylopectin networks [75,375,378,380-3821. For a 20% amylopectin solution (at l"C), turbidity data showed changes up to 4-5 days, whereas events monitored by dilatometry, shear modulus measurements, DSc, andX-ray diffraction followed similar parallel-time scales over longer periods (30-40 days) [75]. These data were interpreted as reflecting aggregation (increases in turbidity) of amylopectin molecules prior to gelation and as showing that the changes detected bythe other techniques involved crystallizationof amylopectin; i.e., gel network development was related to ordering and crystallization of the short-DP (10-20) chains of amylopectin. Similar time dependence in the evolution of G' and AH of the melting endotherm was also found for a 40% amylopectin dispersion during the first 3 h of storage at [381]; however, over a longer time scale (3-48 h), the G' development was progressing faster than that of retrogradation endotherm. The strong dependence of rigiditydevelopmentof40%amylopectin gels on storage temperature, as shown in Fig. 14, further supports the notion that gelation of amylopectin follows typical nucleation kinetics. Moreover, FTIR spectroscopic studies [375] revealed chain ordering at the very early stages (complete within 0.2 h for a 20% waxy maize solution), not detectable by any other physical methods, which was interpreted as involving coil + double-helix transitions of the short-DP chains of amylopectin. This phase is followed by a slower aggregation process (giving rise to turbidity) of these helices to produce crystallites. Small-strain rheological measurements of rather dilute amylopectin solutions (3-10% w/w) indeed provided evidence for a rapid establishment of network structure involving only short-range intermolecular associations, presumably via double-helix formation [76]. No visible inhomogeneities of these weak gel networks ( 4 0 N-m") were detected in the time scale of the experiments (i.e., the gels remained clear), implying a gelation mechanism other than long-range ordering (crystallization)of amylopectin chains. Studies on aging waxy maize starch gels using 'H crossrelaxation NMR and high-resolution N M R spectroscopy revealed the presence of three differentmotional states [382]: (1) ahighly mobile chain fraction; (2) highly rigid regions, corresponding to the crystalline domains; and (3) an intermediate in mobility fraction, which may include unassociated or partially associated chains in the vicinity of crystallites. Amylopectin gel stiffness does not show a strong dependence on concentration; for waxy maize amylopectin gels (10-25%), the modulus varied linearly with concentration [75]. The G'-concentration data of waxy maize amylopectin gels were recently fittedwith the Clark and Ross-Murphy model over the concentration range of 20-50% [381]. The fine structure of amylopectin also seems to influence its gelation kinetics. Cereal amylopectins (wheat, barley, maize) ofshorter chain length exhibited slower rates in mod-
Biliaderis
ulus development than those of tuber starches (potato, canna) [380]. The acceleration in retrogradation kinetics for amylopectins with a higher proportion of longer chains has also been reported by other authors [325,383,384]. The gelationhetrogradation of amylopectin is thermoreversible, since the gel structure (G’), retrogradationendotherm (4, and X-ray crystallinity are abolished by heating at temperatures below 100°C (T,,,of amylopectin crystallites -50-60°C) [151,381]. Amylopectin gelation and crystallization are influenced bythe presence of small-molecular-weight solutes (salts, sugars, lipids). The retrogradation rate of amylopectins isolated from different starches was reduced with increasing concentration of NaCl [384]. The effects of polyhydroxycompounds (PHCs) on structure formation in aging waxy maize starches or amylopectin gels were investigated by DSC [384-3861 and dynamic rheometry [386]. At a weight ratio of starch:PHCwater of 1.0:0.5:1.5, some PHCs retarded the kinetics of chain ordering in the amylopectin network, while others had a structure-promoting effect [385] (Fig. 15); e.g., ribose, maltotriose, and talose suppressed the growth rate of G’ and (gel-melting endotherm), whereas fructose appeared to accelerate these processes. The magnitude of these effects is dependent on solute concentration. As shown in Fig. 15, gels containing ribose showed a descending level of structure withascendingriboseconcentration. For fructose, athigh concentrations w/w), chain ordering in amylopectin gels is accelerated, whereas this solute seems to exert an inhibitory effect at low concentrations. In the homologous series of glucose oligomers, maltotriose exhibited the largest inhibitory effect,whereas maltooctaosepromoted amylopectin retrogradation [385]. Reduced rates of firmness(large-deformationmeasurements)and crystallinity (attributedmainly to the amylopectin component) of aging wheat starch gels containing ribose, glucose, or sucrose at the nominal ratio of starch:sugar:water of 1:l:l were also reported by l ’ h s o n et al. [387]; at this level of sugar, the effectiveness of reducing firmness and crystallinity followed the order ribose > sucrose > glucose. In a subsequent study [388], the effect of sugar concentration on the crystallization rate of amylopectin in wheat starch gels was investigated by WAXD. The pentoses ribose and xylose were found to suppress the retrogradation of amylopectin with increasing level of sugar,whereas fructose promoted crystallinity development. The unusual behavior of fructose was first observed by Slade and Levine [3] using calorimetry to follow aging of wheat starch gels (starch: sugar:water at 1:l:l) at These authors reported that the extent of amylopectin recrystallization decreased in the order of fructose > mannose > water alone > galactose > glucose > maltose > sucrose > maltotriose > xylose. They have also suggested that sugars, in general, behave as antiplasticizing solutes (relative to the plasticizing action of water alone), thus
reducing chain mobility and crystallization of amylopectin. Obviously, the results obtained for fructose are not in accord with the antiplasticization theory. In a comprehensive study using a variety of PHCs [385], changes in the retrogradation kinetics of waxy maize starch gels were found to be solute specific. The DSC data were correlated with several physicochemical properties of the PHCs in solution (e.g., hydration characteristics). On the basis of the relationships found, it was proposed that the compatibility of the sugars with the water structure, as governed by the stereochemistry of their main conformers in solution, is an important determinant of amylopectin stability in a composite starch-solute gel matrix [385]. Sugars that fit well in the hydrogen-bonded network of water (e.g., ribose) are very effective in inhibiting amylopectin retrogradation. In contrast, PHCs that greatly disturb the “normal” water structure (e.g., fructose), forming strong hydration layers around them, promote chain ordering and crystallization of amylopectin. Of importance to the microstructureand viscoelastic properties of starch gels is the thermodynamic incompatibility between amylose and amylopectin in an aqueous medium [116]; this leads to a phase separation, one phase being enriched in amylose while the other contains mostly amylopectin. When phase separation occurs, the effective concentration of both polymers in their respective microdomains is raised, and this may lead to the establishment of a composite gel network at concentrations where neither one of the two polymers is capable of bringing about alone. The polymer composition of the continuous and dispersed phases are dependent on the ratio of amy1ose:amylopectin (r). At a particular value of this ratio (called the phase inversionpoint), the continuous phase becomes the discontinuous dispersed filler, and vice versa. For 8% mixed amylose-amylopectin gels, Leloup et al. [l531 have shown that the supermolecular organization, mechanical properties (using large-deformation testing), and a-amylase digestibility of the gel vary with the ratio, r; mixed gels exhibited behaviorsimilar to pure amylopectin for r 0.43 and to pure amylose for higher r values. A sharp transition in gel properties at r = 0.43 (corresponds to -30% amylose content) was assumed to reflect an inversion in the polymeric composition of the continuous and dispersed microphases, amylopectin being the continuous phase at r 0.43 and amylose above this value. Small-amplitude oscillatory shear measurements of mixed amylose-amylopectin systems (at a total polymer concentration of -4%) also confirmed that their rheological properties strongly depend on the weight ratio of the two polymers [389]. The viscoelastic behavior of the gels seemed to be governed by a phase separation process, yielding a composite system. Drastic changes in network properties, identified with the point of phase inversion, occurred atr = 0.17. Amylose also tends to separate from amylopectin during heating of aqueous dispersions of starch granules, as evidenced by light microscopy of starch
0
12
36
24
Time (h)
0
2
4
6
Time (days) 15 Effect of added sugars on retrogradation kinetics (G', AH) of amylopectin gels (rheological and calorimetric tests at 8°C and 6"C, respectively) for (a), (b) starch:sugar:water at 1.0:0.5:1.5w h , for (c), (d) starch:sugar:water at where X vaned between 0.1 and 0.9. (Adapted with permission from Refs. 385 and 386.)
Ribose
A
AH
Continued
pastes and gels stained with iodine solution the extent to which this process occurs woulddependon starch concentration,temperaturetime, shear, molecular size, and degree of branching of amylose, as well as on the structure of amylopectin crystalline networkand its interactions (chain entanglements) with the amylose chains. Thus, in low-shear cereal starch pastes, amylose seemed to diffuse outside the granules, forniing a continuous network whereas in potato starch pastes amylose was retained more in the peripheral layers of the swollen granules Even when gels were prepared under high shear, wheat starch amylopectin did not appear to solubilize (still localized in the granular fragments), compared with potato starch pastes, where the continuous phase was a mixture of This led to the suggestion cosolubilized amylose and amylopectin that cereal starches form stronger gels than potato starch because of the more efficient separation of starch molecules during heating, which promotes the It is also likely that gelatinized gelation of the linear starch fraction cereal starch granules (because of their lower swelling capacity and deformability) are stiffer than those of potato starch, thus increasing the firmness of the gel; amylose is believed to act as a restraint on granule swelling of cereal starches because of the formation of amylose-lipid complexes, which dissolve at temperatures well above the gelatinization temperature. According to Steeneken for concentrated suspensions of gelatinized starch granules, the thickening power is mainly governed by the rigidity of the closely packed granules. Overall, it is questionable whether one can draw a direct relation between the extent of macromolecular demixing occurring during pasting and storage and the changes observed in the rheological propertiesof starch gels. These systems are highly complex rheologically, as described next, andthere should be more fundamental work to relate structural aspects and physical properties of composite starch gel networks. The practicalaspect of the nature of amylose-amylopectin composite gels is that amylose offers better rigidity and thermostabilityto the network structure.Gels with amylose conwhere amylose forms the continuous phase (entraps tents greater than amylopectin in the form of droplets), exhibit increased cohesiveness, cooking stability, and resistance to a-amylolysis in vivo and in vitro. This has been demonstrated for pasta products made from mungbean starch and rice flour
2. Starch Gels Starch gels are readily formed when gelatinized starch dispersions of sufficient concentration (usually are cooled to room temperature. On cooling a starch paste, the exuded amylose from the swollen granules forms
Starch
an interpenetrating network (via interchain associations) that surrounds the gelatinized granules. In this respect, starch gels can be regarded as hydrated polymer composites where swollen, amylopectin-enriched granules (filler particles) are embedded in and reinforce a continuous matrix of entangled amylose molecules[395]. The mechanical properties of such amaterial would depend on the rheological characteristics of the amylose matrix, the volume fraction and the rigidity (deformability) of the gelatinized granules, and the interactions between the dispersed and the continuous phases [396]. Granule size and uniformity, amylose content, macromolecular organization of the granules, minor starch constituents (lipids, phosphate ester groups), the presence of other solutes (salts, sugars, lipids), pH, starch concentration, and shear-temperature-time regimes employed during gel preparation are all important to the viscoelasticity of starch dispersions and can account for the differences inrheologicalpropertiesamong starches or the variation often reported for starch gels of the same botanical origin [192,193,397]. Moreover, any transitions or interactions that affect the phase separation of amylose and amylopectin during pasting, the stiffness the amylose gel matrix, and the deformability of the gelatinized granules ultimately have an effect on gel mechanical properties. For cereal starches, where amylose leaches out of the granule during gelatinization and largely contributes to the viscoelasticity of the continuous phase, it is interesting to explore the relationship between amylose content and mechanical properties of starch gels. Rice starches, because of their uniform granules (shape, size, and size distributions) offer a unique model system in this respect. Figure 16 shows the dependence of G' andtan 8 (= G"/G')on amylose content for 25% gels of rice starches from 43 different varieties [315]. Isolation of these materials, gel casting under static conditions (no shear) in hermetically sealed disk dies [145], and testing protocols were identical, to minimize other contributions to the rheological properties of the gels; e.g., gel rigidity is highly dependenton aging effects. An inverse linear relationship between tan and amylose content was observed (r = 0.75, p .Ol). Also there was a general trend for increased G' with amylose content; G' (A%)'.'*, r = 0.76, p .01. However, the scatter of the data in these plots clearly points to the fact that in addition to amylose several other factors contribute to the mechanical properties such composite networks. The dependence of gel rigidity on starch concentration has also been examined. Linear relationships between the rigidity modulus (as determined with a Ward and Saunder's U-tube) and concentration (6-30%) were reported for potato, wheat, and maize starch gels [395]. A linear relationship of G' concentration for maize starch gels was also shown, using :mall-amplitude oscillatory shear testing [398], while a slightly stronger con-
I
0.4
.
-
20
0I--
I
50
20
(%) Storage modulus (G') and tan 8 of rice starch gels varying amylose content. (Reprinted with permission from Ref. 315.)
w/w)with
centration dependence ( C I . 3 was reported for wheat starch pastes (2-4%) using an oscillatory viscometer [399]. Over a broader concentration range (8-40%),much stronger power law relationships were found for wheat, legume,and rice starches with dynamic rheometry[145,315,378]: G' m C2,"2.9. The viscoelastic behavior of gelatinized starch dispersions is also dependent on the shear conditions used during their preparation. Svegmark and Hermansson [400,401] have shown that warm cereal starch pastes are less sensitive to shearing thansimilarlytreated potato starch pastes; the complex shear modulus of the sheared 10% pastes decreased to -50%, for wheat and maize starches, and to -2.5%, for potato starch, the respective modulus values of the low-shear control pastes. Moreover, the mechanical properties potato starch gels are sensitive to pH and ionic strength of the medium because of the polyelectrolyte nature of potato amylopectin [402]; i.e., phosphate ester groups present in some glycosyl residues greatly increase the swelling capacity of potato starch granules and thus affect the stiffness of the gel.
During storage of concentrated starch gels, the starch molecules rearrange (retrograde), forming larger chain assemblies, and thereby enhance the stiffness of the network. Similar changes also occur in the structure of most products with high starch content, and these are responsible, at least in part, for the decrease in eating quality of baked items, e.g., the staling of bread [149,403,404]. The time course of retrogradation for starch gels has been shown to consist ofat least two separate phases. The short-time (hours) increases in rigidity (modulus), short-range molecular order (AH), and crystallinity have been ascribed to gelation of the solubilized amylose in the intergranular spaces [151]. In contrast, changes that occur over longer periods (days) were attributed to reordering and crystallization of amylopectin [75,151,378]. On the basis of time-dependent FI'IR spectral changes of 10% potato and waxy maize starch gels, as well as other spectroscopic data presented in previous reports [375,405], Soest et al. [406] have proposed a multistage process for starch retrogradation. The first stage has been ascribed to conformational ordering (double helices) of amyloseandmayalso involve short-range ordering of amylopectin side chains. Amylose aggregation and crystallization occurs mostly in this period. The second stage was described as an induction timefor the onset of amylopectin helix aggregation. In stage 3, amylopectin aggregation and crystallization eventually proceeds; stage involves the phase separation of water (syneresis) due to excessive retrogradation of the polymer chains. The observation, with various probes of structure, that amylose retrogradation is almost completed within the very first few hours of storage [151,152,375,378,406], has recently been confirmed by isothermal microcalorimetricstudies on retrogradationof aqueous dispersions of amylose and starch [407]. A comparison of the initial rate of modulus development for 30% gelatinized starch dispersions (at 20°C) from various botanical sources revealed the order of pea > maize > wheat > potato and was related to the amount of amylose solubilized during gelatinization [408]. However, the rate of long-term modulus increases followed the order pea > potato > maize > wheat; the higher firming rates for pea and potato may reflect the lack of endogenous lipids from these starches, which are known to retard amylopectin recrystallization. The long-term changes in rigidity and crystallinity of starch gels, related to amylopectin crystallization, correspondkineticallywith staling events of aging baked items [403,404]. Thus, information concerning the rates of amylopectin crystallization has implications on the storage stability of bread and other starch-based products. The presence of microcrystalline junctions in aged products has a direct bearing on the retrogradation kinetics from the perspective of temperature-time-water content dependence of the crystallization process. The melting enthalpy increase for retrograded starch
shows that crystallization occurs at a faster rate and to a greater extent when a lower single storage temperature is employedbetween and Furthermore, in retrograded potato starch andcooked wheat grains storage at refrigeration temperatures resulted in the formation less perfect crystallites (lower T, and broader melting transitions) than those formed on storage at room temperature. This is in accord with classical polymer crystallization theory which predicts growth of more imperfect crystals with increasing degree of supercooling (T,-T). Crystallization follows the classical three-step mechanism of nucleation growth(propagation) + crystal ripening (perfection) Within the range T,-T,,,, both nucleation and propagation exhibit an exponential dependence on temperaturesuch that the nucleation rate increases with decreasing temperature, down to the T,, while the propagation rate increases with increasing temperature up to the T , Single-step or multistep temperature crystallization studies showed that the ratelimiting step is nucleation rather than propagation. The DSC kinetic data of Slade further indicated that the effective temperature range in which starch crystallization (in wlw gels) can takeplace is confined between -5°C (T, of fully water-plasticized amorphous starch) and (T, of B-type crystallites of amylopectin), as the theory predicts.Starch crystallization, as determined by DSc, is also affected by the water content. Crystallization in gels and bread does not occur below and above solids level; the overall response of enthalpy to moisture content shows a bell-shaped curve, with maximum values in the range of starch content. The acceleration of retrogradation with increasing water content from to merely reflects the plasticizing effect of water in depressing the Tg the gelatinized starch; i.e., it brings the effective T,-T, into a temperature region, relative to storage temperature, where nucleation and crystallite propagation proceed at high rates. On the other hand, the rate starch crystallization is reduced with increasing moisture content above presumably due to dilution the crystallizable component in the plasticized starch matrix. variety of physical [differential thermal analysis @TA) and DSC X-ray diffraction small-deformationmechanical tests and compression modulus measurements microscopic enzymic and spectroscopic (NMR FTIR and Raman spectroscopy) techniques have been employed to follow aging events in starch gels. These methods not monitor the same starch gel properties and are not sensitive to the same fractions or structural elements developing in the aging gel network. For example, thermal analysis is evidently sensitive to chain ordering of the amylopectin fraction; X-ray
diffraction measures crystalline order of both amylose and amylopectin combined; microscopy reveals spacial distribution and assemblies of starch macromolecules; FTIR and Raman spectroscopy probe conformation- and tallinity-dependent vibrational frequencies of chemical linkages; N M R monitors chain segmental motions, conformational-dependentchemical shifts, and short-range order; and mechanical tests are sensitive to chain entanglements with or without the formation of crystallites. As a result, the time course of retrogradation events in starch gels varies with the measuring technique. Kinetic data of starch gel retrogradation have often been analyzed uswhich ing the Avrami equation relates the fraction of the total change in the measured property (e.g., crystallinity, modulus, enthalpy of staling endotherm) still to occur (‘p) to time
Am - A, ‘p=-- exp(-kt”) Am - Ao or log [-h ‘p] = n log t
+ log k
where k is the rate constant and n is the Avrami exponent. The kinetic data of these studies were shown to fit reasonably well the Avrami model, with calculatedexponent values close to 1. However, the application of the Avrami analysis to concentrated polymer-solvent systems, such as starch gels, has been criticized, due to the inherent limitations in interpretation of the exponent value in terms of nucleation type and crystal morphology [3,432]. Crystallization in aqueous starch systems is known to proceed via a three-step mechanism(nucleation growth maturation), controlled by the amount of water present, and it involves two separate polymers. Despite these theoretical limitations, the Avramiequation provides aconvenient means for quantifying retrogradation kinetics andmaking comparisons among similar starch systems submitted to various processing treatments. In this context, Russell reported thatthe addition of glyceryl monostearate during dough mixing [430] or spraying bread loaves with ethanol after baking [431]led to a reduction in the rate constant for the development of the “staling endotherm,” while they had little effect on the limiting enthalpy different flour value. In a similar study [429], it was shown that the use grists had no effect on the staling kinetics of bread and that the rate constant was independent of the specific loaf volume. The acceleration in storage modulus (G’) development in aging potato starch pastes (12.5 W%) with increasing NaCl concentration (above M) [422] as well as the changes in the retrogradation kinetics (compression modulus) of concentrated (50%
- -
wlv) wheat starch gels caused by various ions have been also evaluated by the Avrami analysis [424]. The effects ofsmall-molecular-weight solutes and other structureforming hydrocolloids (biopolymers) on starch gelation and retrogradation are important in considering the complex nature of starch-based foods and the need to control their rheological and textural properties. For instance, lipids have long been known to affect the gelatinization, retrogradation, and texture of starch-thickened products. Monoacyl lipids, in particular, form inclusion complexes with starch molecules [70,144], and it is likely that texture modification is brought about by such interactions. There appears to be a reduction in the pasting temperature (viscoamylography) [433-4361 and an increase of swelling [306] of cereal starches following solvent extraction of their endogenous lipids; interestingly, this is not accompanied by changes in the characteristic melting temperatures of the granules, as assessed by DSC [306,435,436]. When present as adjuncts, monoacyl lipids reduce the gel volume (granule swelling) and amylose leaching [146,4374391. The extent and modeof interactions between granular starch and added lipids also depend on the chemical nature of the lipid. Thus, while swelling and gelatinization are generally restricted with fatty acids and most emulsifiers [437-4401, addition of some ionic surfactants (e.g., sodium dodecylsulfate, SDS) promotes swelling of the granules [439,441,442].These effects and the resultant rheological behavior are modulated by the type starch, the concentration of the various components, the pH, the presence of salts, and the heat-shear regime used during pasting and cooling. This explains the large variability in the published data concerning the influence of lipids on starch rheology. Moreover, most of the earlier studies were carried out using empirical rheological tests, where due to the temperature-shear cycles employed, it is difficult to separate the impact of mechanical damage of the gel network structure from contributions of the lipid additive itself. Consequently, a whole gamut of effects has been observed, ranging from large increases in gel consistency,noeffect,to large viscosity reductions Therefore, it is important to study the rheological properties of such systems under controlled conditions of thermal and mechanical treatments. The viscoelastic behaviorofheated starch dispersions (10% wlw, wheat, corn, potato, and waxy barley) in the presence of emulsifiers was first investigated by Eliasson [445]. Glycerol monostearate (GMS) and dium stearoyl lactylate (SSL) at l%(drystarch basis) delayed the onset of G’ and G” rise on gelatinization; this effect was less pronounced with the waxy barley starch.The G” of the hot starch pastes (except for wheat starch) was increased in the presence of GMS, SSL, and SDS; this resulted in a higher tan value, compared with free-lipid gels. In a subsequent study
a cationic surfactant (cetyltrimethylammonium bromide, CTAB)was found to increase the G' of native and modified corn starch pastes (7.5% w/w, lipid at2%w/w of starch, testing temperature 25°C); instead, saturated monoglycerides increased in G' for pastes of native corn starch, decreased the G' of crosslinked waxy maize, and had no effect on an acetylated highamylose maize starch derivative. Tm, and lysoInteractions between monoacyl lipids (SDS, GMS, C phosphatidylcholine, or LPC) at 2-4% (starch basis) were also investigated in thermoset gel networks at high starch concentrations (20-35% W/W)by dynamic rheometry and DSC [145]. Although rice and wheat starch gels (21-24% amylose) exhibited higher G' values when lipids were included, smaller changes in the viscoelastic properties were observed for legume starch gels (31-33% amylose); i.e., the higher amylose content of pea and garbanzobean starches seemed to dominate the gel networkproperties. Among the lipids tested, LPC (one of the main endogenous lipids of cereal starches) exerted the greatest effect in increasing the G' and lowering the tan of the cereal starch gels. Kinetic experiments on the development of G' and starch crystallization (AH of retrogradation endotherm)in aging rice and pea starch gels (35% w/w) indicated that lipids retard both processes [145]. The antistaling role of native granular lipids or added surfactants in starch gels or bread has been repeatedly confirmed by DSC [71, 297,404,416,428,447-4491 and mechanical measurements [404,430, 449,4501. The antifirming action of lipids may be caused by amylose complexation, which in turn weakens the cohesion of the amylopectin-enriched granules in the composite gel network [450]. However, the reduction in the rate of amylopectin staling (AH) during the aging of waxy maize starch gels [71] or gels made with blends of varying ratios of amylopectirdamylose [447] as well as other indirect evidence [70,451-4531 imply that amylopectin can also interact with lipids. Isothermal microcalorimetric studies have recently demonstrated that added monoglycerides or SDS inhibit the crystallization processes of both starch polymers during the first 24 h of aging starch gels [407]. The effect of sugars on starch retrogradation is also complex and not well understood. Overall, there appears considerable confusion in the published literature for the role of sugars on aggregation and crystallization of starch molecules; such discrepancies may arise from differences in the proportion of starch to sugar, the conditions for gel preparation and storage, and the various techniques employed to monitor the retrogradation process. Maxwell and &bel [454], using large-deformation mechanical tests, showed a marked increase in the rate of firming of starch gels by fructose, a slight increase byglucose,and essentially no effect for sucrose (wheatstarch: sugar:water at 1:l:l). Similar rheological studies by Germani et al. [425] indicated that maltose and sucrose were more effective than glucose in in-
Billaderis
creasing the firming rate of corn starch gels. In both these studies, however, the elastic moduli of sugar containing gels were lower than for pure starch + sugar) of gels (starch:water at l:l), due to the greater plasticization the polymer matrix. In other studies using X-ray diffraction and firmness measurements [387,388] it was also concluded that sugars reduce firmness and crystallinity developmentinwheat starch gels (starch:sugar:waterat 1:l:l).The magnitude of these effects was dependent on the concentration and type of sugar used; e.g., while most sugars inhibited starch crystallization, fructose seemed to accelerate the process. The structure-promoting behavior of fructose in aging starch gels, compared to other polyhydroxy compounds, has been also confirmed by DSC at starch:sugar:water of 1:l:l [3], 1.0:0.5:1.5[385,386],and0.2:0.09:0.71[455].However,in other calorimetric studies on retrogradation of sweet potato starch gels (33% w/w) [456], fructose was found to prevent retrogradation, although itwas not as effective as glucose and sucrose. On the basis of viscoelastic responses (creep compliance) of starch gels (-33% w/w) containing sugars at -6.0% (w/w on starch basis), Katsuta et al. [457,458] and Miura et al. [449] have shown that the ability of sugars to impede retrogradation is related to the mean number of equatorial hydroxyl groups; solutes with large numbers of equatorial-OHS were more effective in stabilizing the amorphous and entangled matrix of gelatinized starch. The relative ranking of sugars in decreasing the rate of retrogradation was maltotriose > maltose > sucrose > glucose > fructose > xylose, ribose > control gel. Among monosaccharides, hexoses were more effective at inhibiting retrogradation than pentoses, which contradicts other findings [385 -3881. A comparative study of the effect of sugars on the thermal and mechanical properties of aging waxy maize, wheat, potato, and pea starch gels (starch:sugar:waterat1:0.5:1.5w/w)revealedthat sugars inhibited chain organization in the order ribose > sucrose > maltotriose > water alone, glucose > fructose [386]. The effects of sugars on the development of staling endotherm (AH) or gel rigidity (G') were more pronounced with starches of low amylose content; i.e., amylose in high amounts dominates the gel network properties. These findings and the calorimetric data of the effect of a large number of polyhydroxy compounds on the stability of waxy maize starch gels [385] have led to the hypothesis that starch retrogradation kinetics is controlled by the stereochemistry of the sugar. Solutes that seemed to cause very little perturbation in the hydrogen-bonded network of water also had a stabilizing effect on the polymer chains, thus retardingretrogradation[385,386].In designingasmall-carbohydrate solute as an effective antistaling agent, emphasis must therefore be placed on the stereochemistry of its main conformer(s) in solution, particularly in relation to water structure. 4
The effectiveness of n-alkyl glucosides in inhibiting retrogradation of waxy maize and wheat starch gels was recently studied [459]. The rheological and thermal propertiesof aged gels indicated that n-alkylglucosides are as efficient as other commonly used emulsifiersin retarding starch retrogradation; glucosides with intermediate chain lengths in their alkyl group 8 carbons) were the most effective in this respect. Corn [455] and wheat [378] starch gels exhibited greater rates in amylopectin crystallization (AH) in the presence of low dextrose equivalent (D.E.) starch hydrolyzates, although the G’ data suggested the weakening of all composite wheat starchstarch hydrolyzate gels [378]. These observations clearly point to the fact, often not appreciated by researchers in this field, that the development of ordered structures (as assessed by DSC and X-ray diffraction) andthe firmness of starch-based products do not necessarily follow similar trends. Rogers et al. [460] demonstrated bread crumb firming rate to be inversely proportional to its moisture content (within 22-37% m.c.). In breadsof low moisture content (e.g. 22%), starch did not retrograde noticeably, yet those breads firmed very rapidly. Obviously, starch retrogradation and crumb firming do not correlate with each other across varying moisture contents. Anyvariation in moisture content of the end product, as a result of changes in formulation, may therefore lead to different trends in crystallizationkinetics and sensory attributes.This has been shown for breads fortified with water-soluble arabinoxylans [461]. Breads supplementedwiththese cell wall polysaccharides (ata level of 0.3-0.9% w/w of flour) retained highermoisture content during storage and exhibited greater rates in starch retrogradation (AH) than control breads; yet the fortified bread crumbs, because of their higher water content, hadsofter a texture. Overall,the final firmnessof a product wouldbe dependent not only on the level of crystallinity of the starch fraction in the composite food matrix, but also on the extent of network plasticization with water. In the presence of other food hydrocolloids (gums, proteins),the pasting and gelling processes of starch and the rheological properties of the resulting gel networks undergo profound changes.These systems are highly complex to characterize rheologically, because the hydrocolloid may affect the phenomena of granule swelling and exudation of amylose during gelatinization, thereby influencing the deformability of the dispersed granules, as well as interact with the solubilized starch molecules in the continuous phase. The gelation process of corn starch dispersions (4%) with added galactomannans (0.1-0.5%) was examined by a constant-stress rheometer [462].Galactomannansaccelerated the gelation kinetics andresultedin higher G’ values for the final networks, compared to the starch alone. The mixed gels were also characterized by greater tan S values, implying a less elastic network, and their G‘ value showed a slightly greater dependence on
frequency. These findings were rationalized in terms of thermodynamic incompatibility between amylose and galactomannan in the continuous phase of the gel. In similar studies, the kinetics of gel formation in 7% mixed starch-hydrocolloid dispersions (6.65% corn starch gum) was shortenedconsiderablyin the case of guar gum, locust beangum,and K-carrageenan instead, warrageenan seemed to interfere with the network development. Addition of these hydrocolloids also led to an increase in the viscous component (G”) of the gel, raising the tan 6 values for the mixed gel, with the exception of L-carrageenan, which showed the opposite effect. Acceleration of gelation was interpreted as resulting from increasing concentration of starch and gum in their respective microdomains due to their phase separation, whereas the opposing behavior of L-carrageenan was attributed to intermolecular interactions between starch and this hydrocolloid. The influence of purified arabinoxylans (2% w/w of a-D-glucan) on the retrogradation kinetics of concentrated amylose (20% w/w), wheat, and waxy maizestarches w/w) was examined by dynamic rheometry, DSc, andX-raydiffraction Amylose-andwheatstarch-arabinoxylan mixtures exhibited higher G‘ and a greater rate of structural order development than pure amylose and starch gels. Similar kinetic responses were also shown for the arabinoxylan-amylopectin systems in terms of order (AH and crystallinity), but a markedly retarded gelation rate (G’) was evident. These observations suggested that arabinoxylans interfere with intermolecular processes responsible for the establishment of an extensivethreedimensional amylopectin gel network structure. The gelation kinetics and viscoelasticity of wheat starch (6%)-caseinate (7.5%) blends were recently studied by dynamic rheometry The addition of caseinate accelerated the gelation process but decreased the final plateau G’, compared to starch alone. The rheologicalbehavior of the protein-starch blends was interpreted in terms of two antagonistic effects. First, caseinate significantly reduces swelling and solubility of starch during pasting, which would lower the volume fraction of the dispersed phase and the concentration of amylose in the continuous phase; this should result in a substantial decrease of paste viscosity. On the other hand, because of the incompatibility of caseinate with starch components,aphase separation might occur in the continuous phase, where caseinate and solubilized starch molecules coexist, which would enhance gel viscosity. With the aim of texture modification and quality improvementof composite food formulations, there is certainly a need for more fundamental work on these mixed gelling systems to provide a sound basis for predicting and controlling their rheological responses.
+
From a practical viewpoint, several possibilities exist to retard or prevent starch retrogradation and staling events in thermally processed foods [197,466]:(1) storage at temperatures below T, (e.g., bread products promptly wrapped and stored at <-2O"C);(2) control of effective T, by moisture content and/or product formulation, relative to storage temperathat conditions for crystallization become less favorable (e.g., extures, truded cereals of low final moisture content); (3) modification starch of structure to reduce intermolecular associations and continuity of the gel network (e.g., by the addition of hydrolytic enzymes to cleave interconnecting chain segments between crystallites, lipids to complex with individual starch chains, and sugars to decrease the rate of chain aggregation); (4) incorporation of hydrocolloids for better moisture retention and asofter crumb texture. The various aspects of the staling of bread and other bakery foods as well as all the critical factors influencing the shelf life of these products have recently been reviewed [149,467].
D. Phase Transitions of V-Complexes Over the past fifteen years, X-ray diffraction and DSc studies on starchlipid interactions have contributed new knowledge aboutthe structure, thermal behavior, and transitions between the various polymorphic forms of amylose-lipid complexes in model systems and in actual foodproducts The presence of these complexes is revealed by endothermic transitions at temperatureswell above the melting endotherms of amylopectin crystallites in granular starch or in retrograded starch gels (M3 and M4, Fig. 10). Complex formation is thermoreversible, as evidencedbyanexothermonthe DSC cooling curves [134,468,471,472]. This transition displays marked thermal hysteresis (AT: 15-25"C, cooling rates 3-1OoC/min) [134,468,472], as anticipated for nucleation-controlled ordering processes of macromolecules. The thermal stability (T,) and melting enthalpies (AH) of V-amylose complexes are dependent on the chemical structure of the complexing ligand [134136,142,469-473,4761, amylose chain length [135,476], and the conditions (temperature-time-solvent) employed during complexation [134,137,139142,469,471-474,4761. When fatty acids were used as ligand mIecules, T, increased with the length of the saturated aliphatic chain [469,471,473], and it decreased with increasing level of cis unsaturation [142,469,472,473]. The T,,,of highly crystalline complexes of fatty acids with amyloses of different DP (20, 30, 40, 80, and 100) increased with amylose chain length [476]. Moreover, complexes crystallized from melt at high polymerconcentrations (10-40% w/w) exhibited broader melting transitions and lower melting enthalpies than their counterparts prepared by crystallization from dilute
Billaderis
lution (0.8% w/v) [134], implying a lower degree of perfection and a wider distribution of ordered structures for the former.Apparent melting enthalpies of amylose-lipid complexes usually vary between 8 and 32 J/g. As with granular starch, the melting-transition temperature of complexes is influenced by water content [134,135,185,297]. Water also affects the melting behavior of the complexes, as illustrated in Fig. 17a for the amylose-glycerol monostearate complex. Melting is highly cooperative at high moisture levels (heatingrates5-1O0C/min), yielding a single endotherm;i.e.,zero-entropyproductionmelting conditions (melting without change in the metastability of the system during heating) are approached. However, as the water content is decreased below 70% w/w, the peak temperature is raised, and a second melting transition progressively evolves. These thermal responsesare typical of nonequilibrium melting of metastable structures. Additional evidence for reorganization is provided by the exothermic effect shown between the two endotherms in the DSC curves (Fig. 17a, weight fraction of complex 0.6-0.9) as well as by DSC experiments in which melting is examined as a function of heating rate. Increasing the heating rate from 3" to 60"C/min reduces the magnitude of the high-temperature transition (Fig. 17b). Overall,the effect of water on the phase transitions of thesesystems, following heat-moistureplasticization of their amorphous chain segments (i.e., at T > Tg),can be rationalized by considering the thermodynamic melting-point depression of the ordered domains as well as the structural reorganization during heating. The thermal behavior of amylose-lipid complexes should therefore be viewed in terms of the temperature dependence of metastable states [4,197]. Since the various processes are under kinetic control, their manifestation in the thermal curves will depend on all the parameters governing nonequilibrium phase changes; these include the supermolecular structure of the complex, heating rate vs. reorganization rate, moisture content, and the presence of other solutes. In a number of calorimetric studies 473,4741, multiple melting transitionswere reported, implying a relationship between thermal properties and supermolecular structure of the complex. The structural origin of the endotherm multiplicityhas been sorted outusing amylose-monoglyceride complexes prepared by varying the crystallization conditions [137,139,478]. Several supermolecular structures were thus obtained (Fig. 18, forms I, IIa, and IIb), which were characterized by calorimetry, X-ray diffraction, distribution of chain segments in the ordered domains of the complex following a-amylase etching, and gel permeation chromatography of the resistant amylodextrins. For any given monoglyceride used as ligand, forms I and IIa were characterized by constant melting temperatures, regardless of the degree of supercooling (AT = T,,, - T,) employed for their formation from dilute amylose solutions (0.25% w/v, amylose:li-
Starch
133
.l0 .20
40
120
80
MO
EO
Temperature
240
("C) -1
0
10
M
- Cl8
30
Heating rate (OClmin) 1 7 (a) DSC melting profiles of amylose-glycerol monostearate complex (form I) as a function of weight fraction the complex. (b) Effect heating rate on the melting-transition enthalpies (AH,and AH,,)of amylose complexes (50%W/ W in water) with the l-C,,, and l-C18saturated monoglycerides.
Billaderis
T
II
k I
26
Diffraction angle (20)
Temperature CC)
DSC solids) and X-ray diffraction diagrams three amyloseglycerol momstearate complexes differing in the degree of chain organization in solid state. The inset depicts the relationships between Gibbs free energy and temperature for the structural forms I, 11%and IIb, the arrow indicates melt-mediated transformation (of metastable form I to IIa. (Reprinted with permission from Ref. 194.)
gand ratio 5:l wiw). Form I, obtained under conditions favoring rapid nucleation (at low Tc),had a low T,,, and in the hydrated state gave an amorphouslike X-ray diffraction pattern;i.e.,it has only short-range order. In contrast, form IIa (preferred polymorph under high Tc) appeared as a polycrystalline specimen, giving the typical reflections of the V,, complex. At intermediate crystallization temperatures the solid-state structures of the complexes were characterized by various ratios of forms I and Ha, and no intermediate form was detected. These observations were later confirmed by similar studies on amylose complexes with linear alcohols (4-6 carbon atoms) [l431 and fatty acids [142]. Differences in birefringence, density, andviscoelastic properties among different structural forms of the complexes were also detected [137,143]. Crystallizationandannealing studies for amylose-monoglyceridecom-
plexes, under controlled temperature-time storage protocols [137,139], further suggested that forms I (aggregated state with random distribution of helical chain segments) and II (more compact structure with well-defined crystalline order) represent two distinct free-energy domains, separated from each other by high-energy barriers. This implies that conversion of the kineticallypreferred form Ito the thermodynamically favored structure I1 (state of lower free energy) of the complex occurs only after partial melting of the former (Fig. 18, inset). Annealing of type IIa complex at high temperatures gives rise to more perfected V-crystals (IIb of higher T'), typical of metastable partially crystalline polymers [137,142]. The thermal stability and transitions between forms I and I1 were also examined in the presence of various solutes [139,140]. The observed conformational responses in stabilizing (Na,SO,, sucrose, CsCl) and destabilizing (urea, guanidine hydrochloride) solvent environments further suggested that interconversion between