Statistical Methods for Survival Data Analysis, Third Edition (Wiley Series in Probability and Statistics)

Statistical Methods for Survival Data Analysis Statistical Methods for Survival Data Analysis Third Edition ELISA T...

Author: Elisa T. Lee | John Wenyu Wang

114 downloads 2079 Views 5MB Size Report

This content was uploaded by our users and we assume good faith they have the permission to share this book. If you own the copyright to this book and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Start by pressing the button below!

Report copyright / DMCA form

DOWNLOAD PDF

Statistical Methods for Survival Data Analysis

Statistical Methods for Survival Data Analysis Third Edition

ELISA T. LEE JOHN WENYU WANG Department of Biostatistics and Epidemiology and Center for American Indian Health Research College of Public Health University of Oklahoma Health Sciences Center Oklahoma City, Oklahoma

A JOHN WILEY & SONS, INC., PUBLICATION

Copyright 2003 by John Wiley & Sons, Inc. All rights reserved. Published by John Wiley & Sons, Inc., Hoboken, New Jersey. Published simultaneously in Canada. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, scanning, or otherwise, except as permitted under Section 107 or 108 of the 1976 United States Copyright Act, without either the prior written permission of the Publisher, or authorization through payment of the appropriate per-copy fee to the Copyright Clearance Center, Inc., 222 Rosewood Drive, Danvers, MA 01923, 978-750-8400, fax 978-750-4470, or on the web at www.copyright.com. Requests to the Publisher for permission should be addressed to the Permissions Department, John Wiley & Sons, Inc., 111 River Street, Hoboken, NJ 07030, (201) 748-6011, fax (201) 748-6008, e-mail: permreqwiley.com. Limit of Liability/Disclaimer of Warranty: While the publisher and author have used their best efforts in preparing this book, they make no representations or warranties with respect to the accuracy or completeness of the contents of this book and speciﬁcally disclaim any implied warranties of merchantability or ﬁtness for a particular purpose. No warranty may be created or extended by sales representatives or written sales materials. The advice and strategies contained herein may not be suitable for your situation You should consult with a professional where appropriate. Neither the publisher nor author shall be liable for any loss of proﬁt or any other commercial damages, including but not limited to special, incidental, consequential, or other damages. For general information on our other products and services please contact our Customer Care Department within the U.S. at 877-762-2974, outside the U.S. at 317-572-3993 or fax 317-572-4002. Wiley also publishes its books in a variety of electronic formats. Some content that appears in print, however, may not be available in electronic format. Library of Congress Cataloging-in-Publication Data: Lee, Elisa T. Statistical methods for survival data analysis.--3rd ed./Elisa T. Lee and John Wenyu Wang. p. cm.--(Wiley series in probability and statistics) Includes bibliographical references and index. ISBN 0-471-36997-7 (cloth : alk. paper) 1. Medicine--Research--Statistical methods. 2. Failure time data analysis. 3. Prognosis--Statistical methods. I. Wang, John Wenyu. II. Title. III. Series. R853.S7 L43 2003 610.72--dc21 Printed in the United States of America. 10 9 8 7 6 5 4 3 2 1

2002027025

To the memory of our parents Mr. Chi-Lan Tan and Mrs. Hwei-Chi Lee Tan (E.T.L.) Mr. Beijun Zhang and Mrs. Xiangyi Wang (J.W.W.)

Contents

Preface

xi

1 Introduction 1.1 Preliminaries, 1 1.2 Censored Data, 1 1.3 Scope of the Book, 5 Bibliographical Remarks, 7

2 Functions of Survival Time

8

2.1 Deﬁnitions, 8 2.2 Relationships of the Survival Functions, 15 Bibliographical Remarks, 17 Exercises, 17

3 Examples of Survival Data Analysis

19

3.1 Example 3.1: Comparison of Two Treatments and Three Diets, 19 3.2 Example 3.2: Comparison of Two Survival Patterns Using Life Tables, 26 3.3 Example 3.3: Fitting Survival Distributions to Remission Data, 29 3.4 Example 3.4: Relative Mortality and Identiﬁcation of Prognostic Factors, 32 3.5 Example 3.5: Identiﬁcation of Risk Factors, 40 Bibliographical Remarks, 47 Exercises, 47 vii



viii 4 Nonparametric Methods of Estimating Survival Functions 4.1 4.2 4.3 4.4

64

Product-Limit Estimates of Survivorship Function, 65 Life-Table Analysis, 77 Relative, Five-Year, and Corrected Survival Rates, 94 Standardized Rates and Ratios, 97 Bibliographical Remarks, 102 Exercises, 102

5 Nonparametric Methods for Comparing Survival Distributions

106

5.1 Comparison of Two Survival Distributions, 106 5.2 Mantel—Haenszel Test, 121 5.3 Comparison of K (K 9 2) Samples, 125 Bibliographical Remarks, 131 Exercises, 131 6 Some Well-Known Parametric Survival Distributions and Their Applications 6.1 6.2 6.3 6.4 6.5 6.6

Exponential Distribution, 134 Weibull Distribution, 138 Lognormal Distribution, 143 Gamma and Generalized Gamma Distributions, 148 Log-Logistic Distribution, 154 Other Survival Distributions, 155 Bibliographical Remarks, 160 Exercises, 160

7 Estimation Procedures for Parametric Survival Distributions without Covariates 7.1 7.2 7.3 7.4 7.5 7.6 7.7

134

General Maximum Likelihood Estimation Procedure, 162 Exponential Distribution, 166 Weibull Distribution, 178 Lognormal Distribution, 180 Standard and Generalized Gamma Distributions, 188 Log-Logistic Distribution, 195 Other Parametric Survival Distributions, 196 Bibliographical Remarks, 196 Exercises, 197

162



ix

8 Graphical Methods for Survival Distribution Fitting 8.1 8.2 8.3 8.4

198

Introduction, 198 Probability Plotting, 200 Hazard Plotting, 209 Cox—Snell Residual Method, 215 Bibliographical Remarks, 219 Exercises, 219

9 Tests of Goodness of Fit and Distribution Selection

221

9.1 Goodness-of-Fit Test Statistics Based on Asymptotic Likelihood Inferences, 222 9.2 Tests for Appropriateness of a Family of Distributions, 225 9.3 Selection of a Distribution Using BIC or AIC Procedures, 230 9.4 Tests for a Speciﬁc Distribution with Known Parameters, 233 9.5 Hollander and Proschan’s Test for Appropriateness of a Given Distribution with Known Parameters, 236 Bibliographical Remarks, 238 Exercises, 240 10 Parametric Methods for Comparing Two Survival Distributions

243

10.1 Likelihood Ratio Test for Comparing Two Survival Distributions, 243 10.2 Comparison of Two Exponential Distributions, 246 10.3 Comparison of Two Weibull Distributions, 251 10.4 Comparison of Two Gamma Distributions, 252 Bibliographical Remarks, 254 Exercises, 254 11 Parametric Methods for Regression Model Fitting and Identiﬁcation of Prognostic Factors 11.1 Preliminary Examination of Data, 257 11.2 General Structure of Parametric Regression Models and Their Asymptotic Likelihood Inference, 259 11.3 Exponential Regression Model, 263 11.4 Weibull Regression Model, 269 11.5 Lognormal Regression Model, 274 11.6 Extended Generalized Gamma Regression Model, 277

256



x 11.7 Log-Logistic Regression Model, 280 11.8 Other Parametric Regression Models, 283 11.9 Model Selection Methods, 286 Bibliographical Remarks, 295 Exercises, 295 12 Identiﬁcation of Prognostic Factors Related to Survival Time: Cox Proportional Hazards Model 12.1 12.2 12.3 12.4

Partial Likelihood Function for Survival Times, 298 Identiﬁcation of Signiﬁcant Covariates, 314 Estimation of the Survivorship Function with Covariates, 319 Adequacy Assessment of the Proportional Hazards Model, 326 Bibliographical Remarks, 336 Exercises, 337

13 Identiﬁcation of Prognostic Factors Related to Survival Time: Nonproportional Hazards Models 13.1 13.2 13.3 13.4 13.5

298

339

Models with Time-Dependent Covariates, 339 Stratiﬁed Proportional Hazards Models, 348 Competing Risks Model, 352 Recurrent Events Models, 356 Models for Related Observations, 374 Bibliographical Remarks, 376 Exercises, 376

14 Identiﬁcation of Risk Factors Related to Dichotomous and Polychotomous Outcomes

377

14.1 Univariate Analysis, 378 14.2 Logistic and Conditional Logistic Regression Models for Dichotomous Responses, 385 14.3 Models for Polychotomous Outcomes, 413 Bibliographical Remarks, 425 Exercises, 425 Appendix A Newton--Raphson Method

428

Appendix B Statistical Tables

433

References

488

Index

511

Preface

Statistical methods for survival data analysis have continued to ﬂourish in the last two decades. Applications of the methods have been widened from their historical use in cancer and reliability research to business, criminology, epidemiology, and social and behavioral sciences. The third edition of Statistical Methods for Survival Data Analysis is intended to provide a comprehensive introduction of the most commonly used methods for analyzing survival data. It begins with basic deﬁnitions and interpretations of survival functions. From there, the reader is guided through methods, parametric and nonparametric, for estimating and comparing these functions and the search for a theoretical distribution (or model) to ﬁt the data. Parametric and nonparametric approaches to the identiﬁcation of prognostic factors that are related to survival are then discussed. Finally, regression methods, primarily linear logistic regression models, to identify risk factors for dichotomous and polychotomous outcomes are introduced. The third edition continues to be application-oriented, with a minimum level of mathematics. In a few chapters, some knowledge of calculus and matrix algebra is needed. The few sections that introduce the general mathematical structure for the methods can be skipped without loss of continuity. A large number of practical examples are given to assist the reader in understanding the methods and applications and in interpreting the results. Readers with only college algebra should ﬁnd the book readable and understandable. There are many excellent books on clinical trials. We therefore have deleted the two chapters on the subject that were in the second edition. Instead, we have included discussions of more statistical methods for survival data analysis. A brief summary of the improvements made for the third edition is given below.

1. Two additional distributions, the log-logistic distribution and a generalized gamma distribution, have been added to the application of parametric models that can be used in model ﬁtting and prognostic factor identiﬁcation (Chapters 6, 7, and 11). xi



xii

2. In several sections (Sections 7.1, 9.1, 10.1, 11.2, and 12.1), discussions of the asymptotic likelihood inference of the methods covered in the chapters are given. These sections are intended to provide a more general mathematical structure for statisticians. 3. The Cox—Snell residual method has been added to the chapter on graphical methods for survival distribution ﬁtting (Chapter 8). In addition, the sections on probability and hazard plotting have been revised so that no special graphical papers are required to make the plots. 4. More tests of goodness of ﬁt are given, including the BIC and AIC procedures (Chapters 9 and 11). 5. For Cox’s proportional hazards model (Chapter 12), we have now included methods to assess its adequency and procedures to estimate the survivorship function with covariates. 6. The concept of nonproportional hazards models is introduced (Chapter 13), which includes models with time-dependent covariates, stratiﬁed models, competing risks models, recurrent event models, and models for related observations. 7. The chapter on linear logistic regression (Chapter 14) has been expanded to cover regression models for polychotomous outcomes. In addition, methods for a general m : n matching design have been added to the section on conditional logistic regression for case—control studies. 8. Computer programming codes for software packages BMDP, SAS, and SPSS are provided for most examples in the text. We would like to thank the many researchers, teachers, and students who have used the second edition of the book. The suggestions for improvement that many of them have provided are invaluable. Special thanks go to Xing Wang, Linda Hutton, Tracy Mankin, and Imran Ahmed for typing the manuscript. Steve Quigley of John Wiley convinced us to work on a third edition. We thank him for his enthusiasm. Finally, we are most grateful to our families, Sam, Vivian, Benedict, Jennifer, and Annelisa (E.T.L.), and Alice and Xing (J.W.W.), for the constant joy, love, and support they have given us. E T. L J W W Oklahoma City, OK April 18, 2001

Statistical Methods for Survival Data Analysis. Elisa T. Lee and John Wenyu Wang Copyright ¶ 2003 John Wiley & Sons, Inc. ISBN: 0-471-36999-7

CHAPTER 1

Introduction

1.1 PRELIMINARIES This book is for biomedical researchers, epidemiologists, consulting statisticians, students taking a ﬁrst course on survival data analysis, and others interested in survival time study. It deals with statistical methods for analyzing survival data derived from laboratory studies of animals, clinical and epidemiologic studies of humans, and other appropriate applications. Survival time can be deﬁned broadly as the time to the occurrence of a given event. This event can be the development of a disease, response to a treatment, relapse, or death. Therefore, survival time can be tumor-free time, the time from the start of treatment to response, length of remission, and time to death. Survival data can include survival time, response to a given treatment, and patient characteristics related to response, survival, and the development of a disease. The study of survival data has focused on predicting the probability of response, survival, or mean lifetime, comparing the survival distributions of experimental animals or of human patients and the identiﬁcation of risk and/or prognostic factors related to response, survival, and the development of a disease. In this book, special consideration is given to the study of survival data in biomedical sciences, although all the methods are suitable for applications in industrial reliability, social sciences, and business. Examples of survival data in these ﬁelds are the lifetime of electronic devices, components, or systems (reliability engineering); felons’ time to parole (criminology); duration of ﬁrst marriage (sociology); length of newspaper or magazine subscription (marketing); and worker’s compensation claims (insurance) and their various inﬂuencing risk or prognostic factors. 1.2 CENSORED DATA Many researchers consider survival data analysis to be merely the application of two conventional statistical methods to a special type of problem: parametric if the distribution of survival times is known to be normal and nonparametric 1

2



if the distribution is unknown. This assumption would be true if the survival times of all the subjects were exact and known; however, some survival times are not. Further, the survival distribution is often skewed, or far from being normal. Thus there is a need for new statistical techniques. One of the most important developments is due to a special feature of survival data in the life sciences that occurs when some subjects in the study have not experienced the event of interest at the end of the study or time of analysis. For example, some patients may still be alive or disease-free at the end of the study period. The exact survival times of these subjects are unknown. These are called censored observations or censored times and can also occur when people are lost to follow-up after a period of study. When these are not censored observations, the set of survival times is complete. There are three types of censoring. Type I Censoring Animal studies usually start with a ﬁxed number of animals, to which the treatment or treatments is given. Because of time and/or cost limitations, the researcher often cannot wait for the death of all the animals. One option is to observe for a ﬁxed period of time, say six months, after which the surviving animals are sacriﬁced. Survival times recorded for the animals that died during the study period are the times from the start of the experiment to their death. These are called exact or uncensored observations. The survival times of the sacriﬁced animals are not known exactly but are recorded as at least the length of the study period. These are called censored observations. Some animals could be lost or die accidentally. Their survival times, from the start of experiment to loss or death, are also censored observations. In type I censoring, if there are no accidental losses, all censored observations equal the length of the study period. For example, suppose that six rats have been exposed to carcinogens by injecting tumor cells into their foot pads. The times to develop a tumor of a given size are observed. The investigator decides to terminate the experiment after 30 weeks. Figure 1.1 is a plot of the development times of the tumors. Rats A, B, and D developed tumors after 10, 15, and 25 weeks, respectively. Rats C and E did not develop tumors by the end of the study; their tumor-free times are thus 30-plus weeks. Rat F died accidentally without tumors after 19 weeks of observation. The survival data (tumor-free times) are 10, 15, 30;, 25, 30;, and 19; weeks. (The plus indicates a censored observation.) Type II Censoring Another option in animal studies is to wait until a ﬁxed portion of the animals have died, say 80 of 100, after which the surviving animals are sacriﬁced. In this case, type II censoring, if there are no accidental losses, the censored observations equal the largest uncensored observation. For example, in an experiment of six rats (Figure 1.2), the investigator may decide to terminate the study after four of the six rats have developed tumors. The survival or tumor-free times are then 10, 15, 35;, 25, 35, and 19; weeks.

 

3

Figure 1.1 Example of type I censored data.

Figure 1.2 Example of type II censored data.

Type III Censoring In most clinical and epidemiologic studies the period of study is ﬁxed and patients enter the study at different times during that period. Some may die before the end of the study; their exact survival times are known. Others may withdraw before the end of the study and are lost to follow-up. Still others may be alive at the end of the study. For ‘‘lost’’ patients, survival times are at least from their entrance to the last contact. For patients still alive, survival times are at least from entry to the end of the study. The latter two kinds of observations are censored observations. Since the entry times are not simultaneous, the censored times are also different. This is type III censoring. For example, suppose that six patients with acute leukemia enter a clinical study



4

Figure 1.3 Example of type III censored data.

during a total study period of one year. Suppose also that all six respond to treatment and achieve remission. The remission times are plotted in Figure 1.3. Patients A, C, and E achieve remission at the beginning of the second, fourth, and ninth months, and relapse after four, six, and three months, respectively. Patient B achieves remission at the beginning of the third month but is lost to follow-up four months later; the remission duration is thus at least four months. Patients D and F achieve remission at the beginning of the ﬁfth and tenth months, respectively, and are still in remission at the end of the study; their remission times are thus at least eight and three months. The respective remission times of the six patients are 4, 4;, 6, 8;, 3, and 3; months. Type I and type II censored observations are also called singly censored data, and type III, progressively censored data, by Cohen (1965). Another commonly used name for type III censoring is random censoring. All of these types of censoring are right censoring or censoring to the right. There are also left censoring and interval censoring cases. L eft censoring occurs when it is known that the event of interest occurred prior to a certain time t, but the exact time of occurrence is unknown. For example, an epidemiologist wishes to know the age at diagnosis in a follow-up study of diabetic retinopathy. At the time of the examination, a 50-year-old participant was found to have already developed retinopathy, but there is no record of the exact time at which initial evidence was found. Thus the age at examination (i.e., 50) is a left-censored observation. It means that the age of diagnosis for this patient is at most 50 years. Interval censoring occurs when the event of interest is known to have occurred between times a and b. For example, if medical records indicate that at age 45, the patient in the example above did not have retinopathy, his age at diagnosis is between 45 and 50 years. We will study descriptive and analytic methods for complete, singly censored, and progressively censored survival data using numerical and graphical

   

5

techniques. Analytic methods discussed include parametric and nonparametric. Parametric approaches are used either when a suitable model or distribution is ﬁtted to the data or when a distribution can be assumed for the population from which the sample is drawn. Commonly used survival distributions are the exponential, Weibull, lognormal, and gamma. If a survival distribution is found to ﬁt the data properly, the survival pattern can then be described by the parameters in a compact way. Statistical inference can be based on the distribution chosen. If the search for an appropriate model or distribution is too time consuming or not economical or no theoretical distribution adequately ﬁts the data, nonparametric methods, which are generally easy to apply, should be considered.

1.3 SCOPE OF THE BOOK This book is divided into four parts. Part I (Chapters 1, 2, and 3) deﬁnes survival functions and gives examples of survival data analysis. Survival distribution is most commonly described by three functions: the survivorship function (also called the cumulative survival rate or survival function), the probability density function, and the hazard function (hazard rate or age-speciﬁc rate). In Chapter 2 we deﬁne these three functions and their equivalence relationships. Chapter 3 illustrates survival data analysis with ﬁve examples taken from actual research situations. Clinical and laboratory data are systematically analyzed in progressive steps and the results are interpreted. Section and chapter numbers are given for quick reference. The actual calculations are given as examples or left as exercises in the chapters where the methods are discussed. Four sets of data are provided in the exercise section for the reader to analyze. These data are referred to in the various chapters. In Part II (Chapters 4 and 5) we introduce some of the most widely used nonparametric methods for estimating and comparing survival distributions. Chapter 4 deals with the nonparametric methods for estimating the three survival functions: the Kaplan and Meier product-limit (PL) estimate and the life-table technique (population life tables and clinical life tables). Also covered is standardization of rates by direct and indirect methods, including the standardized mortality ratio. Chapter 5 is devoted to nonparametric techniques for comparing survival distributions. A common practice is to compare the survival experiences of two or more groups differing in their treatment or in a given characteristic. Several nonparametric tests are described. Part III (Chapters 6 to 10) introduces the parametric approach to survival data analysis. Although nonparametric methods play an important role in survival studies, parametric techniques cannot be ignored. In Chapter 6 we introduce and discuss the exponential, Weibull, lognormal, gamma, and log-logistic survival distributions. Practical applications of these distributions taken from the literature are included.

6



An important part of survival data analysis is model or distribution ﬁtting. Once an appropriate statistical model for survival time has been constructed and its parameters estimated, its information can help predict survival, develop optimal treatment regimens, plan future clinical or laboratory studies, and so on. The graphical technique is a simple informal way to select a statistical model and estimate its parameters. When a statistical distribution is found to ﬁt the data well, the parameters can be estimated by analytical methods. In Chapter 7 we discuss analytical estimation procedures for survival distributions. Most of the estimation procedures are based on the maximum likelihood method. Mathematical derivations are omitted; only formulas for the estimates and examples are given. In Chapter 8 we introduce three kinds of graphical methods: probability plotting, hazard plotting, and the Cox—Snell residual method for survival distribution ﬁtting. In Chapter 9 we discuss several tests of goodness of ﬁt and distribution selection. In Chapter 10 we describe several parametric methods for comparing survival distributions. A topic that has received increasing attention is the identiﬁcation of prognostic factors related to survival time. For example, who is likely to survive longest after mastectomy, and what are the most important factors that inﬂuence that survival? Another subject important to both biomedical researchers and epidemiologists is identiﬁcation of the risk factors related to the development of a given disease and the response to a given treatment. What are the factors most closely related to the development of a given disease? Who is more likely to develop lung cancer, diabetes, or coronary disease? In many diseases, such as cancer, patients who respond to treatment have a better prognosis than patients who do not. The question, then, relates to what the factors are that inﬂuence response. Who is more likely to respond to treatment and thus perhaps survive longer? Part IV (Chapters 11 to 14) deals with prognostic/risk factors and survival times. In Chapter 11 we introduce parametric methods for identifying important prognostic factors. Chapters 12 and 13 cover, respectively, the Cox proportional hazards model and several nonproportional hazards models for the identiﬁcation of prognostic factors. In the ﬁnal chapter, Chapter 14, we introduce the linear logistic regression model for binary outcome variables and its extension to handle polychotomous outcomes. In Appendix A we describe a numerical procedure for solving nonlinear equations, the Newton—Raphson method. This method is suggested in Chapters 7, 11, 12, and 13. Appendix B comprises a number of statistical tables. Most nonparametric techniques discussed here are easy to understand and simple to apply. Parametric methods require an understanding of survival distributions. Unfortunately, most of survival distributions are not simple. Readers without calculus may ﬁnd it difﬁcult to apply them on their own. However, if the main purpose is not model ﬁtting, most parametric techniques can be substituted for by their nonparametric competitors. In fact, a large percentage of survival studies in clinical or epidemiological journals are analyzed by nonparametric methods. Researchers not interested in survival

   

7

model ﬁtting should read the chapters and sections on nonparametric methods. Computer programs for survival data analysis are available in several commercially available software packages: for example, BMDP, SAS, and SPSS. These computer programs are referred to in various chapters when applicable. Computer programming codes are given for many of the examples. Bibliographical Remarks Cross and Clark (1975) was the ﬁrst book to discuss parametric models and nonparametric and graphical techniques for both complete and censored survival data. Since then, several other books have been published in addition to the ﬁrst edition of this book (Lee, 1980, 1992). Elandt-Johnson and Johnson (1980) discuss extensively the construction of life tables, model ﬁtting, competing risk, and mathematical models of biological processes of disease progression and aging. Kalbﬂeisch and Prentice (1980) focus on regression problems with survival data, particularly Cox’s proportional hazards model. Miller (1981) covers a number of parametric and nonparametric methods for survival analysis. Cox and Oakes (1984) also cover the topic concisely with an emphasis on the examination of explanatory variables. Nelson (1982) provides a good discussion of parametric, nonparametric, and graphical methods. The book is more suited for industrial reliability engineers than for biomedical researchers, as are Hahn and Shapiro (1967) and Mann et al. (1974). In addition, Lawless (1982) gives a broad coverage of the area with applications in engineering and biomedical sciences. More recent publications include Marubini and Valsecchi (1994), Kleinbaum (1995), Klein and Moeschberger (1997), and Hosmer and Lemeshow (1999). Most of these books take a more rigorous mathematical approach and require knowledge of mathematical statistics.

Statistical Methods for Survival Data Analysis. Elisa T. Lee and John Wenyu Wang Copyright ¶ 2003 John Wiley & Sons, Inc. ISBN: 0-471-36999-7

CHAPTER 2

Functions of Survival Time

Survival time data measure the time to a certain event, such as failure, death, response, relapse, the development of a given disease, parole, or divorce. These times are subject to random variations, and like any random variables, form a distribution. The distribution of survival times is usually described or characterized by three functions: (1) the survivorship function, (2) the probability density function, and (3) the hazard function. These three functions are mathematically equivalent — if one of them is given, the other two can be derived. In practice, the three functions can be used to illustrate different aspects of the data. A basic problem in survival data analysis is to estimate from the sampled data one or more of these three functions and to draw inferences about the survival pattern in the population. In Section 2.1 we deﬁne the three functions and in Section 2.2, discuss the equivalence relationship among the three functions. 2.1 DEFINITIONS Let T denote the survival time. The distribution of T can be characterized by three equivalent functions. Survivorship Function (or Survival Function) This function, denoted by S(t), is deﬁned as the probability that an individual survives longer than t: S(t) : P (an individual survives longer than t) : P(T t)

(2.1.1)

From the deﬁnition of the cumulative distribution function F(t) of T, S(t) : 1-P (an individual fails before t) : 1 9 F(t) 8

(2.1.2)



9

Here S(t) is a nonincreasing function of time t with the properties S(t) :

1 0

for t : 0 for t : -

That is, the probability of surviving at least at the time zero is 1 and that of surviving an inﬁnite time is zero. The function S(t) is also known as the cumulative survival rate. To depict the course of survival, Berkson (1942) recommended a graphic presentation of S(t). The graph of S(t) is called the survival curve. A steep survival curve, such as the one shown in Figure 2.1a, represents low survival rate or short survival time. A gradual or ﬂat survival curve such as in Figure 2.1b represents high survival rate or longer survival. The survivorship function or the survival curve is used to ﬁnd the 50th percentile (the median) and other percentiles (e.g., 25th and 75th) of survival time and to compare survival distributions of two or more groups. The median survival times in Figure 2.1a and b are approximately 5 and 36 units of time, respectively. The mean is generally used to describe the central tendency of a distribution, but in survival distributions the median is often better because a small number of individuals with exceptionally long or short lifetimes will cause the mean survival time to be disproportionately large or small. In practice, if there are no censored observations, the survivorship function is estimated as the proportion of patients surviving longer than t: S (t) :

number of patients surviving longer than t total number of patients

(2.1.3)

where the circumﬂex denotes an estimate of the function. When censored observations are present, the numerator of (2.1.3) cannot always be determined. For example, consider the following set of survival data: 4, 6, 6;, 10;, 15, 20.

Figure 2.1 Two examples of survival curves.

   

10

Using (2.1.3), we can compute S (5) : 5/6 : 0.833. However, we cannot obtain S (11) since the exact number of patients surviving longer than 11 is unknown. Either the third or the fourth patient (6; and 10;) could survive longer than or less than 11. Thus, when censored observations are present, (2.1.3) is no longer appropriate for estimating S(t). Nonparametric methods of estimating S(t) for censored data are discussed in Chapter 4. Probability Density Function (or Density Function) Like any other continuous random variable, the survival time T has a probability density function deﬁned as the limit of the probability that an individual fails in the short interval t to t ; t per unit width t, or simply the probability of failure in a small interval per unit time. It can be expressed as f (t) :

lim

R

P[an individual dying in the interval (t, t ; t)] t

(2.1.4)

The graph of f (t) is called the density curve. Figure 2.2a and b give two examples of the density curve. The density function has the following two properties: 1. f (t) is a nonnegative function: f (t) 0 :0

for all t 0 for t 0

2. The area between the density curve and the t axis is equal to 1. In practice, if there are no censored observations, the probability density function f (t) is estimated as the proportion of patients dying in an interval per

Figure 2.2 Two examples of density curves.



11

unit width: f (t) :

number of patients dying in the interval beginning at time t (total number of patients);(interval width)

(2.1.5)

Similar to the estimation of S(t), when censored observations are present, (2.1.5) is not applicable. We discuss an appropriate method in Chapter 4. The proportion of individuals that fail in any time interval and the peaks of high frequency of failure can be found from the density function. The density curve in Figure 2.2a gives a pattern of high failure rate at the beginning of the study and decreasing failure rate as time increases. In Figure 2.2b, the peak of high failure frequency occurs at approximately 1.7 units of time. The proportion of individuals that fail between 1 and 2 units of time is equal to the shaded area between the density curve and the axis. The density function is also known as the unconditional failure rate. Hazard Function The hazard function h(t) of survival time T gives the conditional failure rate. This is deﬁned as the probability of failure during a very small time interval, assuming that the individual has survived to the beginning of the interval, or as the limit of the probability that an individual fails in a very short interval, t ; t, given that the individual has survived to time t:

h(t) :

lim P R

an individual fails in the time interval (t, t ; t) given the individual has survived to t t

(2.1.6)

The hazard function can also be deﬁned in terms of the cumulative distribution function F(t) and the probability density function f (t): h(t) :

f (t) 1 9 F(t)

(2.1.7)

The hazard function is also known as the instantaneous failure rate, force of mortality, conditional mortality rate, and age-speciﬁc failure rate. If t in (2.1.6) is age, it is a measure of the proneness to failure as a function of the age of the individual in the sense that the quantity th(t) is the expected proportion of age t individuals who will fail in the short time interval t ; t. The hazard function thus gives the risk of failure per unit time during the aging process. It plays an important role in survival data analysis. In practice, when there are no censored observations the hazard function is estimated as the proportion of patients dying in an interval per unit time, given

   

12

that they have survived to the beginning of the interval: number of patients dying in the interval beginning at time t (number of patients surviving at t);(interval width) number of patients dying per unit time in the interval : (2.1.8) number of patients surviving at t

h (t) :

Actuaries usually use the average hazard rate of the interval in which the number of patients dying per unit time in the interval is divided by the average number of survivors at the midpoint of the interval: h (t) : number of patients dying per unit time in the interval (number of patients surviving at t) 9 (number of deaths in the interval)/2 (2.1.9) The actuarial estimate in (2.1.9) gives a higher hazard rate than (2.1.8) and thus a more conservative estimate. The hazard function may increase, decrease, remain constant, or indicate a more complicated process. Figure 2.3 is a plot of several kinds of hazard function. For example, patients with acute leukemia who do not respond to treatment have an increasing hazard rate, h (t), h (t) is a decreasing hazard function that, for example, indicates the risk of soldiers wounded by bullets who undergo surgery. The main danger is the operation itself and this danger decreases if the surgery is successful. An example of a constant hazard function, h (t), is the risk of healthy persons between 18 and 40 years of age whose main risks of death are accidents. The bathtub curve, h (t), describes the process of

Figure 2.3 Examples of the hazard function.



13

human life. During an initial period, the risk is high (high infant mortality). Subsequently, h(t) stays approximately constant until a certain time, after which it increases because of wear-out failures. Finally, patients with tuberculosis have risks that increase initially, then decrease after treatment. Such an increasing, then decreasing hazard function is described by h (t). The cumulative hazard function is deﬁned as H(t) :

R

h(x) dx

(2.1.10)

H(t) : 9log S(t)

(2.1.11)

It will be shown in Section 2.2 that

Thus, at t : 0, S(t) : 1, H(t) : 0, and at t : -, S(t) : 0, H(t) : -. The cumulative hazard function can be any value between zero and inﬁnity. All log functions in this book are natural logs (base e) unless otherwise indicated. The following example illustrates how these functions can be estimated from a complete sample of grouped survival times without censored observations. Example 2.1 The ﬁrst three columns of Table 2.1 give the survival data of 40 patients with myeloma. The survival times are grouped into intervals of ﬁve months. The estimated survivorship function, density function, and hazard function are also given, with the corresponding graphs plotted in Figure 2.4a—c. Table 2.1 Survival Data and Estimated Survival Functions of 40 Myeloma Patients

Survival Time t (months) 0—5 5—10 10—15 15—20 20—25 25—30 30—35 35—40 40—45 45—50 50

Number of Patients Surviving at Beginning of Interval

Number of Patients Dying in Interval

S (t)

f (t)

h (t)

40 35 28 22 18 13 9 5 5 3 2

5 7 6 4 5 4 4 0 2 1 2

1.000 0.875 0.700 0.550 0.450 0.325 0.225 0.125 0.125 0.075 0.050

0.025 0.035 0.030 0.020 0.025 0.020 0.020 0.000 0.010 0.005 —

0.027 0.044 0.048 0.040 0.065 0.072 0.114 0.000 0.100 0.080 —

14

   

Figure 2.4 Estimated survival functions of myeloma patients.

    

15

Figure 2.4 (Continued).

The estimated survivorship function, S (t), is calculated following (2.1.3) at the beginning or the end of each interval. For example, at the beginning of the ﬁrst interval, all 40 patients are alive, S (0) : 1, and at the beginning of the second interval, 35 of the 40 patients are still alive, S (5) : 35/40 : 0.875. Similarly, S (10) : 28/40 : 0.700. The estimated density function f (t) is computed following (2.1.5). For example, the density function of the ﬁrst interval (0—5) is 5/(40;5) : 0.025, and that of the second interval (5—10) is 7/(40;5) : 0.035. The estimated density function is plotted at the midpoint of each interval (Figure 2.4b). The estimated hazard function, h (t), is computed following the actuarial method given in (2.1.9). For example, the hazard function of the ﬁrst interval 5/[5(40 9 5/2)] : 0.027 and that of the second interval is 7/[5(35 9 7/ 2)] : 0.044. The estimated hazard function is also plotted at the midpoint of each interval (Figure 2.4c). From Table 2.1 or Figure 2.4a, the median survival time of myeloma patients is approximately 17.5 months, and the peak of high frequency of death occurs in 5 to 10 months. In addition, the hazard function shows an increasing trend and reaches its peak at approximately 32.5 months and then ﬂuctuates. 2.2 RELATIONSHIPS OF THE SURVIVAL FUNCTIONS The three functions deﬁned in Section 2.1 are mathematically equivalent. Given any one of them, the other two can be derived. Readers not interested in the mathematical relationship among the three survival functions can skip this

   

16 section without loss of continuity. 1. From (2.1.2) and (2.1.7), h(t) :

f (t) S(t)

(2.2.1)

This relationship can also be derived from (2.1.6) using basic deﬁnitions of conditional probabilities. 2. Since the probability density function is the derivative of the cumulative distribution function, f (t) :

d [1 9 S(t)] : 9S(t) dt

(2.2.2)

3. Substituting (2.2.2) into (2.2.1) yields h(t) : 9

S(t) d : 9 log S(t) S(t) dt

(2.2.3)

4. Integrating (2.2.3) from zero to t and using S(0) : 1, we have 9

R

h(x) dx : log S(t)

or H(t) : 9log S(t) or

S(t) : exp[9H(t)] : exp 9

R

h(x) dx

(2.2.4)

5. From (2.2.1) and (2.2.4) we obtain f (t) : h(t) exp[9H(t)]

(2.2.5)

Hence, if f (t) is known, the survivorship function can be obtained from the basic relationship between f (t), F(t), and (2.1.2). The hazard function can then be determined from (2.2.1). If S(t) is known, f (t) and h(t) can be determined from (2.2.2) and (2.2.1), respectively, or h(t) can be derived ﬁrst from (2.2.3) and then f (t) from (2.2.1). If h(t) is given, S(t) and f (t) can be obtained, respectively, from (2.2.4) and (2.2.5). Thus, given any one of the three survival functions, the other two can easily be derived. The following example illustrates these equivalence relationships.



17

Example 2.2 Suppose that the survival time of a population has the following density function: f (t) : e\R

t0

Using the deﬁnition of the cumulative distribution function,

R

R e\V dx : 9e\V : 1 9 e\R From (2.1.2) we obtain the survivorship function F(t) :

f (x) dx :

R

S(t) : e\R The hazard function can then be obtained from (2.2.1): h(t) :

e\R :1 e\R

A complete treatment of this distribution is given in Section 6.1. Bibliographical Remarks The three survival functions and their equivalents are discussed in every text cited in the Bibliographical Remarks in Chapter 1.

EXERCISES 2.1 Consider the survival data given in Exercise Table 2.1. Compute and plot the estimated survivorship function, the probability density function, and the hazard function. Exercise Table 2.1 Year of Follow-up 0—1 1—2 2—3 3—4 4—5 5—6 6—7 7—8 8—9 9

Number Alive at Beginning of Interval

Number Dying in Interval

1100 860 680 496 358 240 180 128 84 52

240 180 184 138 118 60 52 44 32 28

   

18

2.2 Exercise Table 2.2 is a life table for the total population (of 100,000 live births) in the United States, 1959—1961. Compute and plot the estimated survivorship function, the probability density function, and the hazard function. Exercise Table 2.2 Age Interval 0—1 1—5 5—10 10—15 15—20 20—25 25—30 30—35 35—40 40—45 45—50 50—55 55—60 60—65 65—70 70—75 75—80 80—85 85 and over

Number Living at Beginning of Age Interval

Number Dying in Age Interval

100,000 97,407 96,998 96,765 96,551 96,111 95,517 94,905 94,144 93,064 91,378 88,756 84,711 79,067 71,147 60,857 48,170 33,576 18,542

2,593 409 233 214 440 594 612 761 1,080 1.686 2,622 4,045 5,644 7,920 10,290 12,687 14,594 15,034 18,542

Source: U.S. National Center for Health Statistics, Life Tables 1959—1961, Vol. 1, No. 1, ‘‘United States Life Tables 1959—61,’’ December 1964, pp. 8—9.

2.3 Derive (2.2.1) using (2.1.6) and basic deﬁnitions of conditional probability. 2.4 Given the hazard function h(t) : c derive the survivorship function and the probability density function. 2.5 Given the survivorship function S(t) : exp(9tA) derive the probability density function and the hazard function.

Statistical Methods for Survival Data Analysis. Elisa T. Lee and John Wenyu Wang Copyright ¶ 2003 John Wiley & Sons, Inc. ISBN: 0-471-36999-7

CHAPTER 3

Examples of Survival Data Analysis

The investigator who has assembled a large amount of data must decide what to do with it and what it indicates. In this chapter we take several sets of survival data from actual research situations and analyze them. In Example 3.1 we analyze two sets of data obtained, respectively, from two and three treatment groups to compare the treatment’s abilities to prolong life. Example 3.2 is an example of the life-table technique for large samples. Example 3.3 gives remission data from two treatments; the investigator seeks a well-known distribution for the remission patterns to compare the two groups. In Example 3.4 we study survival data and several other patient characteristics to identify important prognostic factors; the patient characteristics are analyzed individually and simultaneously for their prognostic values. In Example 3.5 we introduce a case in which the interest is to identify risk factors in the development of a given disease. Four sets of real data are presented in the exercises so that the reader can plan analysis.

3.1 EXAMPLE 3.1: COMPARISON OF TWO TREATMENTS AND THREE DIETS 3.1.1 Comparison of Two Treatments Thirty melanoma patients (stages 2 to 4) were studied to compare the immunotherapies BCG (Bacillus Calmette-Guerin) and Corynebacterium parvum for their abilities to prolong remission duration and survival time. The age, gender, disease stage, treatment received, remission duration, and survival time are given in Table 3.1. All the patients were resected before treatment began and thus had no evidence of melanoma at the time of ﬁrst treatment. The usual objective with this type of data is to determine the length of remission and survival and to compare the distributions of remission and survival time in each group. Before comparing the remission and survival 19

20

EXAMPLES OF SURVIVAL DATA ANALYSIS

Table 3.1 Data for 30 Resected Melanoma Patients

Patient 1 2 3 4 5 6 7 8 9 10 11 12 13 14 f15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Age

Gender?

Initial Stage

Treatment Received@

59 50 76 66 33 23 40 34 34 38 54 49 35 22 30 26 27 45 76 48 91 82 50 40 34 38 50 53 48 40

2 2 1 2 1 2 2 1 1 2 2 1 1 1 1 2 1 2 2 1 1 2 2 1 1 1 1 2 2 2

3B 3B 3B 3B 3B 3B 3B 3B 3B 2 2 3B 3B 3B 3B 3B 3B 3B 3A 3A 4A 4A 4A 4A 3A 4A 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Remission DurationA 33.7; 3.8 6.3 2.3 6.4 23.8; 1.8 5.5 16.6; 33.7; 17.1; 4.3 26.9; 21.4; 18.1; 5.8 3.0 11.0; 22.1 23.0; 6.8 10.8; 2.8 9.2 15.9 4.5 9.2 8.2; 8.2; 7.8;

Survival TimeA 33.7; 3.9 10.5 5.4 19.5 23.8; 7.9 16.9; 16.6; 33.7; 17.1; 8.0 26.9; 21.4; 18.1; 16.0; 6.9 11.0; 24.8; 23.0; 8.3 10.8; 12.2; 12.5; 24.4 7.7 14.8; 8.2; 8.2; 7.8;

Source: Data courtesy of Richard Ishmael. ? 1, male; 2, female. @ 1, BCG; 2, C. parvum. A Remission and survival times are in months.

distributions, we attempt to determine if the two treatment groups are comparable with respect to prognostic factors. Let us use the survival time to illustrate the steps. (The remission time could be analyzed similarly.) 1. Estimate and plot the survival function of the two treatment groups. The resulting curves are called survival curves. Points on the curve estimate the proportion of patients who will survive at least a given period of time. For such small samples with progressively censored observations, the Kaplan—Meier product-limit (PL) method is appropriate for estimating the survival function.

EXAMPLE 3.1: COMPARISON OF TWO TREATMENTS AND THREE DIETS

21

Table 3.2 Kaplan--Meier Product-Limit Estimate of Survival Function S(t) BCG Patients Death time (t) S (t)

3.9 0.909

5.4 0.818

7.9 0.727

10.5 0.636

19.5 0.477

C. parvum Patients Death time (t) S (t)

6.9 0.947

7.7 0.895

8.0 0.839

It does not require any assumptions about the form of the function that is being estimated. We discuss this method in detail in Section 4.1. Computer programs for the method can be found in BMDP (Dixon et al. 1990), SPSS Version 10.1 (2000), and SAS Version 8.1 (2000). Examples for computer codes will be given in Section 4.1. Table 3.2 gives the PL estimate of the survival function S (t) for the two treatment groups. Note that S (t) is estimated only at death times; however, the censored observations were used to estimate S(t). The median survival time can be estimated by linear interpolation. For BCG patients the median survival time was about 18.2 months. The median survival time for the C. parvum group cannot be calculated since 15 of the 19 patients were still alive. Most computer programs give not only S (t) but also the standard error of S (t), and the 75-, 50-, and 25-percentile points. Figure 3.1 plots the estimated survival function S (t) for patients receiving the two treatments: The median survival time (50-percentile point) for the BCG group can also be determined graphically. The survival curves clearly show that C. parvum patients had slightly better survival experience than BCG patients. For example, 50% of the BCG patients survived at least 18.2 months, whereas about 61% of the C. parvum patients survived that long. 2. Examine the prognostic homogeneity of the two groups. The next question to ask is whether the difference in survival between the two treatment groups is statistically signiﬁcant. Is the difference shown by the data signiﬁcant or simply random variation in the sample? A statistical test of signiﬁcance is needed. However, a statistical test without considering patient characteristics makes sense only if the two groups of patients are homogeneous with respect to prognostic factors. It has been assumed thus far that the patients in the two groups are comparable and that the only difference between them is treatment. Thus, before performing a statistical test it is necessary to examine the homogeneity between the two groups. Although prognostic factors for melanoma patients are not well established, it has been reported that women and the young have a better survival

22

EXAMPLES OF SURVIVAL DATA ANALYSIS

Figure 3.1 Survival curves of patients receiving BCG and C. parvum.

experience than men and the elderly. Also, the disease stage plays an important role in survival. Let us check the homogeneity of the two treatment groups with respect to age, gender, and disease stage. The age distributions are estimated and plotted in Figure 3.2. The median age is 39 for the BCG group and 43 for the C. parvum patients. To test the signiﬁcance of the difference between the two age distributions, the two-sample t-test (Armitage, 1971; Daniel, 1987) or nonparametric tests such as the Mann—Whitney U-test or the Kolmogorov—Smirnov test (Marascuilo and McSweeney, 1977) are appropriate. However, the generalized Wilcoxon tests given in Section 5.1 can also be used, since they reduce to the Mann—Whitney U-test. Using Geham’s generalized Wilcoxon test, the difference between the two age distributions is not found to be statistically signiﬁcant. More about the test will be given in Section 5.1. The number of male and female patients in the two treatment groups is given in Table 3.3. Sixty-four percent of the BCG patients and 42% of the C. parvum patients are women. A chi-square test can be used to compare the two proportions (see Section 14.1). It can be used only for r;c tables in which the entries are frequencies, not for tables in which the entries are mean values or medians of a certain variable. For a 2;2 table, the chi-square value can be computed by hand. Computer programs for the test can be found in many computer program packages, such as BMDP (Dixon et al., 1990), SPSS Version 10.1 (2000), and SAS Version 8.1 (SAS Institute, 2000). The chi-square value for treatment by gender in Table 3.3 is 1.29 with 1 degree of freedom, which is not signiﬁcant at the 0.05 or 0.10 level. Therefore, the difference between the two proportions is not statistically signiﬁcant. The number of stage 2 patients and the number of patients with more advanced

23

EXAMPLE 3.1: COMPARISON OF TWO TREATMENTS AND THREE DIETS

Figure 3.2 Age distribution of two treatment groups.

disease in the two treatment groups are also given in Table 3.3. Eighteen percent of the BCG patients are at stage 2 against 21% of the C. parvum patients. However, a chi-square test result shows that the difference is not signiﬁcant. Thus we can say that the data do not show heterogeneity between the two treatment groups. If heterogeneity is found, the groups can be divided into subgroups of members who are similar in their prognoses.

Table 3.3 Treatment by Gender and Disease Stage C. parvum

BCG Gender

Number

%

Number

Male Female

4 7 — 11

36 64

11 8 — 19

C. Parvum

BCG

% Total

Disease Stage

58 42

2 3 and 4

15 15 — 30

Number

%

Number

2 9 — 11

18 82

4 15 — 19

% Total 21 79

6 24 — 30

24

EXAMPLES OF SURVIVAL DATA ANALYSIS

3. Compare the two survival distributions. There are several parametric and nonparametric tests to compare two survival distributions. They are described in Chapters 5 and 10. Since we have no information of the survival distribution that the data follow, we would continue to use nonparametric methods to compare the two survival distributions. The four tests described in Sections 5.1.1 to 5.1.4 are suitable. The performance of these tests is discussed at the end of Section 5.1. We chose Gehan’s generalized Wilcoxon test here to demonstrate the analysis procedure only because of its simplicity of calculation. In testing the signiﬁcance of the difference between two survival distributions, the hypothesis is that the survival distribution of the BCG patients is the same as that of the C. parvum patients. Let S (t) and S (t) be the survival function of the BCG and C. parvum groups, respectively. The null hypothesis is H : S (t) : S (t) The alternative hypothesis chosen is two-sided: H : S (t) " S (t) since we have no prior information concerning the superiority of either of the two treatments. The slight difference between the two estimated survival curves could be due to random variation. The one-sided alternative H : S (t) S (t) should be considered inappropriate. Using Gehan’s generalized Wilcoxon test, the difference in survival distribution of the two treatment groups is found to be insigniﬁcant (p : 0.33). Therefore, we do not reject the null hypothesis that the two survival distributions are equal. Although our conclusion is that the data do not provide enough evidence to reject the hypothesis, ‘‘not to reject the null hypothesis’’ does not automatically mean ‘‘to accept the null hypothesis.’’ The difference between the two statements is that the error probability of the latter statement is usually much larger than that of the former. 3.1.2 Comparison of Three Diets A laboratory investigator interested in the relationship between diet and the development of tumors divided 90 rats into three groups and fed them low-fat, saturated fat, and unsaturated fat diets, respectively (King et al., 1979). The rats were of the same age and species and were in similar physical condition. An identical amount of tumor cells were injected into a foot pad of each rat. The rats were observed for 200 days. Many developed a recognizable tumor early in the study period. Some were tumor-free at the end of the 200 days. Rat 16 in the low-fat group and rat 24 in the saturated group died accidentally after 140 days and 170 days, respectively, with no evidence of tumor. Table 3.4 gives the tumor-free time, the time from injection to the time that a tumor develops or to the end of the study. Fifteen of the 30 rats on the low-fat diet developed a tumor before the experiment was terminated. The rat that died had a tumor-free time of at least 140 days. The other 14 rats did not develop any

25

EXAMPLE 3.1: COMPARISON OF TWO TREATMENTS AND THREE DIETS

Table 3.4 Tumor-Free Time (Days) of 90 Rats on Three Different Diets Rat

Low-Fat

Rat

Saturated Fat

Rat

Unsaturated Fat

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

140 177 50 65 86 153 181 191 77 84 87 56 66 73 119 140; 200; 200; 200; 200; 200; 200; 200; 200; 200; 200; 200; 200; 200; 200;

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

124 58 56 68 79 89 107 86 142 110 96 142 86 75 117 98 105 126 43 46 81 133 165 170; 200; 200; 200; 200; 200; 200;

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

112 68 84 109 153 143 60 70 98 164 63 63 77 91 91 66 70 77 63 66 66 94 101 105 108 112 115 126 161 178

Source: King et al. (1979). Data are used by permission of the author.

tumor by the end of the experiment; their tumor-free times were at least 200 days. Among the 30 rats in the saturated fat diet group, 23 developed a tumor, one died tumor-free after 170 days, and six were tumor-free at the end of the experiment. All 30 rats in the unsaturated fat diet group developed tumors within 200 days. The two early deaths can be considered losses to follow-up. The data are singly censored if the two early deaths are excluded. The investigator’s main interest here is to compare the three diets’ abilities to keep the rats tumor-free. To obtain information about the distribution of the tumor-free time, we can ﬁrst estimate the survival (tumor-free) function of the three diet groups. The three survival functions were estimated using the

26

EXAMPLES OF SURVIVAL DATA ANALYSIS

Figure 3.3 Survival curves of rats in three diet groups.

Kaplan—Meier PL method and plotted in Figure 3.3. The median tumor-free times for the low-fat, saturated fat, and unsaturated fat groups were 188, 107, and 91 days, respectively. Since the three groups are homogeneous, we can skip the step that checks for homogeneity and compare the three distributions of tumor-free time. The K-sample test described in Section 5.3.3 can be used to test the signiﬁcance of the differences among the three diet groups. Using this test, the investigator ﬁnds that the differences among the three groups are highly signiﬁcant (p : 0.002). Note that the K-sample test can tell the investigator only that the differences among the groups are statistically signiﬁcant. It cannot tell which two groups contribute the most to the differences — whether the low-fat diet produces a signiﬁcantly different tumor-free time than the saturated fat diet or whether the saturated fat diet is signiﬁcantly different from the unsaturated fat diet. All one can conclude is that the data show a signiﬁcant difference among the tumor-free times produced by the three diets.

3.2 EXAMPLE 3.2: COMPARISON OF TWO SURVIVAL PATTERNS USING LIFE TABLES When the sample of patients is so large that their groupings are meaningful, the life-table technique can be used to estimate the survival distribution. A method developed by Mantel and Haenszel (1959) and applied to life

27

EXAMPLE 3.2: COMPARISON OF TWO SURVIVAL PATTERNS

tables by Mantel (1966) can be used to compare two survival patterns in the life-table analysis. Consider the data of male patients with localized cancer of the rectum diagnosed in Connecticut from 1935 to 1954 (Myers, 1969). A total of 388 patients were diagnosed between 1935 and 1944, and 749 patients were diagnosed between 1945 and 1954. For such large sample sizes the data can be grouped and tabulated as shown in Table 3.5. The 10 intervals indicate the number of years after diagnosis. For the tabulated life tables the survival function S(t ) can be estimated for each interval t . In Section 4.2 we discuss G G the estimation procedures of S(t ) and density and hazard functions. The G survival, density, and hazard functions are the three most important functions that characterize a survival distribution. The S (t ) column in Table 3.5 gives the estimated survival function for the G two time periods; these are plotted in Figure 3.4. Patients diagnosed in the 1945—1954 period had considerably longer survival times (median 3.87 years) than did patients diagnosed in the 1935—1944 period (median 1.58 years). The ﬁve-year survival rate is frequently used by cancer researchers and can easily be determined from a life table. Patients diagnosed in 1935—1944 had a ﬁve-year survival rate of 0.2390, or 23.9%. The patients diagnosed in 1945— 1954 had a rate of 0.4446, or 44.5%. In comparing two sets of survival data, one can compare the proportions of patients surviving some stated period, such as ﬁve years, or the ﬁve-year survival rates. However, one cannot anticipate that two survival patterns will always stand in a superior—inferior

Table 3.5 Life Table for Male Patients with Localized Cancer of Rectum Diagnosed in Connecticut, 1935--1944 and 1945--1954? 1935—1944 Interval (t ) G 1 2 3 4 5 6 7 8 9 10

1945—1954

n G

d

G

w ;l G G

n G

S (t ) G

n G

d G

w ;l G G

n

G

S (t ) G

388 219 173 127 108 91 79 71 66 59

167 45 45 19 17 11 8 5 6 7

2 1 1 0 0 1 0 0 1 0

387.0 218.5 172.5 127.0 108.0 90.5 79.0 71.0 65.5 59.0

0.5685 0.4514 0.3336 0.2837 0.2390 0.2100 0.1887 0.1754 0.1593 0.1404

749 554 456 391 338 292 209 151 120 89

185 88 55 43 32 31 20 7 6 6

10 10 10 10 14 52 38 24 25 24

744.0 549.0 451.0 386.0 331.0 266.0 190.0 139.0 107.5 77.0

0.7513 0.6309 0.5539 0.4922 0.4446 0.3928 0.3514 0.3337 0.3151 0.2905

Source: Myers (1969). ? Symbols: n , number of patients alive at beginning of interval t ; d , number of patients dying G G G during interval t ; w ;l , number of patients withdrawn alive or lost to follow-up during interval G G G t ; n : n 9 (w ;l ); S (t ), cumulative proportion surviving from beginning of study to end of G G G G G G interval t . G

28

EXAMPLES OF SURVIVAL DATA ANALYSIS

Figure 3.4 Survival curves for male patients with localized cancer of the rectum, diagnosed in Connecticut, 1935—1944 versus 1945—1954.

relationship. It is more desirable to make a whole-pattern comparison (see Sections 4.3 and 5.2). The Mantel—Haenszel method described in Section 5.2 is a whole-pattern comparison and can be used to compare two survival patterns in life tables. Application of this method to the data in Table 3.5 results in a chi-square value of 51.996 with 1 degree of freedom. We can conclude that the difference between the two survival patterns is highly signiﬁcant (p 0.001). Estimates of the survival function or survival rate depend on the life-table interval used. If each interval is very short, resulting in a large number of intervals, the computation becomes very tedious and the life-table advantage is not fully taken. One assumption underlying the life table is that the population has the same survival probability in each interval. If the interval length is long, this assumption may be violated and the estimates inaccurate; this should be avoided except for rough calculations. Although the length of each interval and the total number of intervals are important, they will not cause trouble in most clinical studies since the study periods normally cover a short period of time, such as one, two, or three years. Life tables with about 10 to 20 intervals of several months to one year each are reasonable. The investigator should also consider the disease under study. If the variation in survival is large in a short period of time, the interval length should be short. However, in some demographic or other studies it is often of interest to cover a life span from birth to age 85 or more. The number of intervals would be

EXAMPLE 3.3: FITTING SURVIVAL DISTRIBUTIONS

29

very large if short intervals were used. In this case ﬁve-year intervals are sufﬁcient to take into account the important variations in survival rate estimates (Shryock et al., 1971).

3.3 EXAMPLE 3.3: FITTING SURVIVAL DISTRIBUTIONS TO REMISSION DATA The remission times of 42 patients with acute leukemia were reported by Freireich et al. (1963) in a clinical trial undertaken to assess the ability of 6-mercaptopurine (6-MP) to maintain remission. Each patient was randomized to receive 6-MP or a placebo. The study was terminated after one year. The following remission times, in weeks, were recorded: 6-MP (21 patients): 6, 6, 6, 7, 10, 13, 16, 22, 23, 6;, 9;, 10;, 11;, 17;, 19;, 20;, 25;, 32;, 32;, 34;, 35; Placebo (21 patients): 1, 1, 2, 2, 3, 4, 4, 5, 5, 8, 8, 8, 8, 11, 11, 12, 12, 15, 17, 22, 23 Suppose that we are interested in a distribution to describe the remission times of these patients but that no information is available as to which distribution will ﬁt. We need to ﬁnd a distribution that ﬁts the data well. If we can ﬁnd one, the remission experience can then be described by the properties of the distribution, and the remission time of new patients can be predicted. Parametric tests can be used to compare the effectiveness of the two treatments, but since there are a large number of well-known functions and distributions to choose from, the search becomes an art as much as a scientiﬁc task. The simplest and most efﬁcient tool is the graph. Probability plotting can be done for complete data; for data that include censored observations, hazard plotting and the Cox—Snell method are more appropriate. It is not difﬁcult to use the computer to generate these plots. Detailed discussions of probability plotting and hazard plotting are presented in Chapter 8. In both probability and hazard plotting, a linear conﬁguration indicates that the distribution ﬁts well and its parameters can be estimated from the graph. Let us begin by trying to ﬁt a distribution to the remission duration of 6-MP patients. Since the data consist of both censored and uncensored observations, we use the technique of hazard plotting. In this example we limit ourselves to three distributions: the exponential, Weibull, and lognormal. In practice, more distributions may need to be considered. Figures 3.5, 3.6, and 3.7 give the hazard plots for the exponential, Weibull, and lognormal distributions, respectively. A straight line is ﬁtted to the points by eye in each of the plots. Among these graphs, the Weibull distribution appears to provide the best ﬁt to the remission data. The straight line ﬁts the points fairly closely. The estimates of Data are used by permission of the publisher.

30

EXAMPLES OF SURVIVAL DATA ANALYSIS

Figure 3.5 Exponential hazard plot of the remission times of 21 leukemia patients who received 6-MP.

Figure 3.6 Weibull hazard plot of the remission times of 21 leukemia patients who received 6-MP.

EXAMPLE 3.3: FITTING SURVIVAL DISTRIBUTIONS

31

\1 9 exp[H(t)]

Figure 3.7 Log-normal hazard plot of the remission times of 21 leukemia patients who received 6-MP.

the parameters and of the Weibull distribution obtained from the line are equal to 0.033 and 1.143, respectively (methods discussed in Chapter 8). After knowing that the Weibull distribution provides a good ﬁt, we can use an analytical method, the maximum likelihood method, to obtain a more accurate estimate of the parameters. Following the procedures discussed in Chapter 7, the maximum likelihood estimates of and are : 0.03 and : 1.354, which are quite close to the graphical estimates. After an appropriate distribution has been identiﬁed and parameters estimated, we can estimate the probability of having a given duration of remission and other probabilities. For example, the probability of having a remission time longer than 10 weeks can be predicted as P(T 10) : e\A : e9(10*0.03) : 0.822 For the placebo group, we can use the probability plotting technique since the data are complete. Figures 3.8, 3.9, and 3.10 give the exponential, Weibull, and lognormal probability plots. Comparing the three graphs, again, the straight line in the Weibull plot appears to give the best ﬁt. From the Weibull plot, estimates of and are found to be 0.111 and 1.250, respectively. The maximum likelihood estimates of and are, respectively, 0.105 and 1.371. Again, the graphical estimates are very close to the maximum likelihood estimates. Based on the maximum likelihood estimates of the parameters, we

32

EXAMPLES OF SURVIVAL DATA ANALYSIS

log1/[1 9 F (t )]

Figure 3.8 Exponential probability plot of the remission times of 21 leukemia patients who received placebo.

can estimate the probability of having a remission time longer than 10 weeks. Using the same formula as given above, the probability for a patient receiving placebo to have a remission duration longer than 10 weeks is found to be 0.34, which is smaller than that of a patient receiving 6-MP. These graphical methods are subjective. The judgment as to whether the assumed distribution ﬁts the data is based on a visual examination rather than on an objective statistical test. However, the methods are very simple and do provide a great deal of information. Even in a case where none of the distributions discussed in this book ﬁt well, graphs can help ﬁnd the reasons and thus help modify the model. Therefore, graphical methods are usually recommended as the ﬁrst thing to try.

3.4 EXAMPLE 3.4: RELATIVE MORTALITY AND IDENTIFICATION OF PROGNOSTIC FACTORS One thousand and twelve Oklahoma Indians (379 men and 633 women) with non-insulin-dependent diabetes mellitus (NIDDM) were examined in

EXAMPLE 3.4: RELATIVE MORTALITY

33

log log1/[1 9 F(t)]

Figure 3.9 Weibull probability plot of the remission times of 21 leukemia patients who received placebo.

\(F(t))

Figure 3.10 Log-normal probability plot of the remission times of 21 leukemia patients who received placebo.

34

EXAMPLES OF SURVIVAL DATA ANALYSIS

1972—1980 and a mortality follow-up study was conducted in 1986—1989 (Lee et al., 1993). The mean [standard deviation (SD)] age and duration of diabetes at baseline examination were 52 (11) and 7 (6) years. The average duration of follow-up was 10 (SD 4) years. As of December 31, 1989, 548 patients were alive, 452 (187 men and 265 women) were dead, and 12 could not be traced. Table 3.6 gives the survival time in years (T ) of the ﬁrst 40 male patients along with 12 potential prognostic factors: age, duration of diabetes (DUR) in years, family history of diabetes (FAM), use of insulin within one year of diagnosis (INS), use of diuretics (DIU), hypertension (HBP), retinopathy (EVD), proteinuria (PRO), fasting plasma glucose (GLU) in milligrams per deciliter, cholesterol (TC) in milligrams per deciliter, triglyceride (TG) in milligrams per deciliter, and body mass index (BMI), which is deﬁned as weight in kilograms divided by height in meters squared. Among other things, the authors compared the mortality experience of the diabetic patients with that of the general population in Oklahoma over the follow-up period. Taking changes in age distribution into consideration, the patients were divided into ﬁve groups according to their age at baseline examination: 35, 35—44, 45—54, 55—64, and 65. The expected survival rates were calculated on a yearly basis following the methods described in Section 4.3 and using the death rates given in the 1970 and 1980 Oklahoma population life tables. Death rates for the years between 1970 and 1980 and between 1980 and 1989 were estimated based on the 1970 and 1980 statistics and the assumption that changes in death rates between 1970 and 1980 and after 1980 follow a linear trend. The observed and expected survival curves for the groups were plotted (Figure 3.11), and ratios of the observed and expected number of deaths (O/E ratios) by age were tabulated (Table 3.7). Figure 3.11 shows that the diabetic patients had a much lower survivorship than the general Oklahoma population for this age—gender distribution. At the beginning of the ﬁfteenth year after baseline examination, the relative survival for the diabetic Oklahoma Indians was only 60%. The overall O/E ratios in Table 3.7 are 2.92 [or standardized mortality ratio (SMR) 292] for men and 4.09 (or SMR 409) for women, which indicates a signiﬁcantly higher mortality rate in the diabetic Oklahoma Indians than in the general population. Although patients in every group experienced excessive mortality, the younger patients had the highest rate. The relationship between the 12 potential prognostic variables and the survival time of men was examined using univariate and multivariate methods. The procedures are summarized below. 1. Examine the individual relationship of each variable to survival. One way to analyze the data is ﬁrst to determine which of the 12 variables could be considered of signiﬁcant prognostic importance. In addition to correlation analysis of these variables, the survival times in subcategories are compared (Table 3.8). Patients are grouped into subgroups in a meaningful way or in a way that maximizes the observed difference in survival time between the

EXAMPLE 3.4: RELATIVE MORTALITY

35

Figure 3.11 Observed and expected survivorship from baseline examination for dabetic Oklahoma Indians.

subgroups (subject to the constraint that each subgroup contains at least 10% of the total number of patients). The survivorship function for every subgroup of each variable was estimated using the Kaplan—Meier method (discussed in Chapter 4) and plotted. Figure 3.12 gives an example. Survival functions among the subgroups were compared by the logrank test (one of the available tests discussed in Chapter 5). Table 3.8 shows that except cholesterol and triglyceride, every one of the 12 variables is signiﬁcant. The median survival time decreases as age and duration of diabetes increase. Patients with a family history of diabetes, elevated fasting plasma glucose, hypertension, or retinopathy have signiﬁcantly shorter survival durations than those without these characteristics. Patients with baseline BMI values greater than or equal to 30 had much better survivorship than did patients with a lower BMI value.

36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Patient

1 1 0 0 0 0 0 1 1 0 0 1 1 1 0 0 0 0 0 0

Status?

12.4 14.1 14.4 14.2 14.4 12.4 12.4 7.0 13.6 14.4 12.4 9.8 0.0 12.1 14.4 12.4 14.4 14.2 12.4 13.7

T

44.0 43.5 47.6 36.3 54.4 50.8 50.0 66.9 40.2 54.1 38.9 51.2 53.0 45.0 38.3 40.0 44.4 48.2 36.3 41.9

Age

3 1 4 3 7 4 2 8 14 4 3 4 6 5 2 5 9 5 6 3

DUR 1 0 1 1 0 1 1 0 1 1 1 1 0 0 1 1 1 1 1 1

FAM@ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

INS@ 0 0 1 0 0 1 0 0 0 1 0 0 1 1 0 1 0 1 0 0

DIU@ 0 0 1 0 0 0 0 0 1 0 1 0 0 1 0 1 0 1 0 0

HBP@ 0 0 0 0 0 0 0 0 1 1 0 0 0 0 0 1 0 1 0 1

EVD@ 1 0 0 0 0 0 0 1 0 0 1 1 1 0 0 1 0 1 0 0

PRO@

Table 3.6 Data of First 40 Male Patients Enrolled in Mortality Study of Oklahoma Diabetic Indians

242 94 100 171 112 83 104 161 262 115 108 184 126 115 110 227 182 184 238 284

GLU 392 158 195 212 204 206 178 189 241 183 237 114 206 238 204 159 193 171 196 170

TC

538 94 405 218 77 178 100 99 301 392 49 118 480 177 180 337 332 238 162 125

TG

34.2 42.2 33.1 38.5 31.7 41.5 39.5 29.7 27.5 24.4 32.4 26.5 34.5 18.9 31.2 39.2 32.7 33.5 24.2 30.7

BMI

37

1 1 0 0 0 0 0 0 1 1 1 1 0 1 1 0 1 1 1 1

? 1, dead; 0, alive. @ 1, yes; 0, no.

21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

13.4 12.6 14.0 12.4 12.9 12.4 14.5 13.4 13.9 12.0 3.6 15.4 10.3 5.8 2.5 15.0 5.5 4.5 6.8 3.6

49.7 51.5 44.1 35.9 50.4 48.0 40.1 54.5 69.3 38.5 63.7 71.8 59.5 50.1 75.4 29.6 60.2 63.9 57.4 71.3

15 9 1 3 1 1 3 0 6 0 18 12 3 1 18 1 18 4 17 18

0 1 1 1 0 0 0 0 1 1 0 1 1 1 1 1 0 1 1 1

0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 1

0 1 0 0 0 1 0 0 1 1 0 0 1 0 0 0 0 0 0 1

0 1 0 0 1 1 0 1 1 1 1 0 1 0 1 0 0 1 1 1

0 1 0 0 0 0 0 0 0 0 1 0 0 0 0 0 1 0 1 1

0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 1 0 1 0 1

248 96 116 120 128 95 89 104 122 225 211 150 180 400 281 167 351 127 153 179

217 174 251 129 190 207 252 490 162 183 217 227 188 200 692 154 206 180 786 488

234 144 153 76 123 59 112 540 209 343 124 137 308 166 364 157 141 131 466 364

28.0 24.2 33.3 30.1 27.7 28.1 31.7 30.8 24.2 43.1 25.1 26.0 28.1 26.1 49.7 60.2 26.0 21.8 34.1 25.6

38

EXAMPLES OF SURVIVAL DATA ANALYSIS

Table 3.7 Observed and Expected Number of Deaths and O/E Ratios During Follow-up Period by Gender and Age at Baseline Age at Baseline (yr)

Males

Females

Observed

Expected

O/E

Observed

Expected

O/E

44 45—54 55—64 65; Total

34 79 32 42 187

6.48 25.64 11.67 20.32 64.11

5.25 3.08 2.74 2.06 2.92

31 85 69 80 265

5.51 18.40 15.03 25.86 64.80

5.63 4.62 4.59 3.09 4.09

2. Examine the simultaneous relationship of the variables to survival. Examination of each variable can give only a preliminary idea of which variables might be of prognostic importance. The simultaneous effect of the variables must be analyzed by an appropriate multivariate statistical method to determine the relative importance of each. Cox’s (1972) proportional hazards model

Figure 3.12 Survival curves of diabetic patients by hypertension status at baseline.

39

EXAMPLE 3.4: RELATIVE MORTALITY

Table 3.8 Survival Time by Potential Prognostic Variable for Male Diabetic Patients

Variable Age (yr) 45 45—54 55—64 65 Family history of diabetes No Yes Duration of diabetes (yr) 7 7—13 14 Use of diuretics No Yes Use of insulin 1 year of diagnosis No Yes Hypertension No Yes Retinopathy No Yes Proteinuria Negative Slight Heavy Fasting plasma glucose 200 200 Cholesterol 240 240 Triglyceride 220 220 BMI 30 30

Number of Patients

Number of Deaths

Median Survival Time (yr) p Value

102 173 53 46

34 79 31 43

15.2 14.2 9.1 5.1

0.001

104 238

62 104

11.4 14.8

0.01

207 91 58

84 49 48

15.2 12.2 7.9

0.001

254 102

117 64

14.5 10.0

0.001

317 39

157 24

13.9 11.9

0.05

211 151

84 99

15.3 9.8

0.001

332 24

163 18

13.9 6.5

0.001

250 54 57

112 27 44

14.5 12.4 8.0

0.001

235 139

106 81

11.9 8.4

0.05

300 64

144 38

14.8 12.2

0.12

223 141

105 77

14.1 13.2

0.44

189 184

114 73

11.8 15.4

0.001

40

EXAMPLES OF SURVIVAL DATA ANALYSIS

can be applied. This model, presented in Chapter 12, is a regression model that relates patient characteristics directly to the risk of failure and thus indirectly to survival. The assumption of this model is that the hazards for different strata of each independent (or prognostic) variable are proportional over time. This assumption was veriﬁed by a graphical method (discussed in Chapter 12) using each of the variables. Figure 3.13 gives an example of the graph of log[9S(t)] versus t for the two hypertension groups. The two almost parallel curves indicate that the hazards of dying are proportional. Therefore, the assumption of the proportional hazards model is satisﬁed and the model appropriate. This model can be ﬁtted by a stepwise procedure that results in a ranking of the prognostic variables. The ﬁrst variable selected to enter the model is the most important single variable in predicting the risk of dying. The second variable is the second most important, and so on. A signiﬁcance level can be obtained from a likelihood ratio test at each step, which indicates the level of contribution given by the additional variable. Using the proportional hazards model and a stepwise procedure, seven of the 12 variables were identiﬁed as signiﬁcant at the 0.05 level based on the likelihood ratio test at each step. These variables, the regression coefﬁcients, and the signiﬁcance levels based on the Ward test, which uses the regression coefﬁcient and its standard error (S.E.) are given in Table 3.9. The sign of the coefﬁcient indicates whether the variable is positively or negatively related to the hazard of dying. For example, age and duration of diabetes are both positively related to the risk of dying and therefore negatively related to the survival time. Table 3.9 also gives the ratio of risk (or hazard) for values of each variable unfavorable to survival to values of that variable favorable to survival. For example, patients who were 60 years of age at baseline had a 3.05 times higher risk of dying during the follow-up period (10—16 years, average 13 years) than did patients who were only 40 years old at baseline. For dichotomous variables, the ratio of risk is equal to exp(coefﬁcient), which is also interpreted as the relative risk of the variable adjusting for the other variables. Consequently, the conﬁdence interval for the relative risk can be calculated (not shown in Table 3.9). Based on this set of data, the authors conclude that age, hypertension, duration of diabetes, fasting plasma glucose, BMI, proteinuria, and use of diuretics are signiﬁcantly related to survival. The multivariate method also showed that high values of BMI might be protective.

3.5 EXAMPLE 3.5: IDENTIFICATION OF RISK FACTORS A study of the incidence of retinopathy in Oklahoma Indians with NIDDM was conducted in 1987—1990 as part of a prospective study of diabetic complications (Lee et al., 1992). Among the 312 patients who were free of retinopathy at initial examination in the 1970s, 228 were found to have

41

EXAMPLE 3.5: IDENTIFICATION OF RISK FACTORS

Figure 3.13 Curves of log[9log S(t)] for the two hypertension groups.

Table 3.9 Signiﬁcant Variables (at 0.05 Level) Identiﬁed by Proportional Hazards Model Relative Risk@ Variable? Age Hypertension: 1, yes, 0, no Duration of diabetes Fasting plasma glucose BMI Proteinuria: 1, yes, 0, no Use of diuretics: 1, yes; 0, no

Regression Coefﬁcient

p Value (Ward Test)

Favorable Unfavorable

Ratio of Risk

0.0558 0.6360

0.001 0.001

9.32 1.00

28.45 1.89

3.05 1.89

0.0559

0.001

1.32

2.19

1.66

0.0023

0.010

1.35

1.58

1.17

90.0330 0.3744

0.035 0.025

0.32 1.00

0.44 1.45

0.72 1.45

0.4191

0.030

1.00

1.52

1.52

? Variables are listed in order of entry into model with a p-value limit for entry of 0.05. @ Favorable categories are 40 years of age, no hypertension, duration of diabetes 5 years, fasting plasma glucose 130 mg/dL, BMI 35, no proteinuria, and no diuretics use. Unfavorable categories are 60 years of age, hypertensive, duration of diabetes 14 years, fasting plasma glucose 200 mg/dL, BMI 25, having proteinuria, and diuretics use.

42

EXAMPLES OF SURVIVAL DATA ANALYSIS

developed the eye disease during the 10 to 16-year follow-up period (average follow-up time 12.7 years). Twelve potential factors (assessed at time of baseline examination) were examined by univariate and multivariate methods for their relationship to retinopathy (RET): age, gender, duration of diabetes (DUR), fasting plasma glucose (GLU), initial treatment (TRT), systolic (SBP) and diastolic blood pressure (DBP), body mass index (BMI), plasma cholesterol (TC), plasma triglyceride (TG), and presence of macrovascular disease (LVD) or renal disease (RD). Table 3.10 gives the data for the ﬁrst 40 patients. Among other things, the authors related these variables to the development of retinopathy. 1. Examine the individual relationship of each variable to the development of diabetic retinopathy. Table 3.11 gives some summary statistics of the eight continuous variables for patients who have developed retinopathy and for those who have not. Notice that patients who have developed the disease were younger at baseline and had much higher fasting plasma glucose, systolic and diastolic blood pressure, and plasma triglyceride than did patients who have not. Table 3.12 summarizes the contingency table analysis of retinopathy incidence rates. The number of patients at risk of developing retinopathy and the number of patients who developed the disease (and rate) are given by subcategory of each potential risk factor. Using the chi-square test, it is found that there was a signiﬁcant difference in the retinopathy rate among the subcategories of several variables using a signiﬁcance level of 0.05: duration of diabetes, fasting plasma glucose, systolic and diastolic blood pressure, and treatment. It appears that patients with poor glucose control or high blood pressure or treated with oral agents or insulin have a higher incidence of retinopathy. In addition, patients with high triglyceride levels tend to have higher incidence of retinopathy (p : 0.064). However, patients who had developed macrovascular disease at the time of baseline examination had a lower retinopathy incidence. The authors state that this may be due to the fact that 68% of the patients who had macrovascular disease either died (54%) during the follow-up period or were lost to follow-up (14%). Many of these patients may have developed retinopathy, particularly the patients who have died, but were not included. Therefore, the lower incidence of retinopathy in patients who had macrovascular disease at baseline is probably the result of a selection bias. Similarly, the large number of death plus the losses to follow-up may also contribute to the drop in retinopathy rate in patients who had had diabetes for more than 12 years at baseline. Among the 80 patients in this duration of diabetes category, 56% have died and 10% did not participate in the follow-up examination. The large number of deaths may also be responsible for the ﬁnding that patients who survived long enough to develop retinopathy were younger at baseline. The deceased patients were signiﬁcantly older (mean 57 years) than the survivors who participated in the follow-up examination (mean 48 years).

43

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Patient

1 0 0 1 1 1 1 0 1 0 0 1 1 1 1 1 1 1 1 1 0 1

RET?

47.6 54.4 50.8 49.4 50.0 50.7 35.3 50.2 45.0 38.3 45.8 51.6 36.3 44.7 37.2 52.6 44.1 35.9 50.4 48.0 47.5 50.1

Age

M M M F M F F F M M F F M F F F M M M M F F

Gender

4 7 4 5 2 7 2 5 5 2 5 3 6 16 1 9 1 3 1 1 1 6

DUR 2 1 2 2 2 2 2 2 2 2 3 2 2 2 2 2 1 1 2 2 2 2

TRT@ 100 112 83 276 104 242 130 130 115 110 130 141 238 190 126 159 116 120 128 95 85 138

GLU 156 112 134 102 142 142 134 100 134 132 118 112 142 152 136 140 126 132 144 128 124 106

SBP 98 78 80 70 86 78 80 70 100 80 68 78 94 90 90 76 76 80 90 74 82 72

DBP 195 204 206 190 178 217 390 174 238 204 185 152 194 132 133 151 251 129 190 207 161 181

TC 405 77 178 222 100 268 564 128 177 180 316 77 162 161 211 132 153 76 123 59 190 135

TG

Table 3.10 First 40 Patients Involved in Study of Risk Factors in Development of Diabetic Retinopathy

33.1 31.7 41.5 24.1 39.5 31.6 47.0 29.8 18.9 31.2 26.6 31.2 24.2 32.0 32.7 26.7 33.3 30.1 27.7 28.1 31.6 30.5

BMI

0 0 0 0 0 1 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 1

RD?

(Continued overleaf )

0 0 1 0 0 0 0 0 1 1 1 0 0 0 0 0 0 0 0 1 1 0

LVD?

44

0 1 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 0

RET?

43.3 54.5 52.2 53.3 64.3 44.6 47.1 46.5 51.5 59.5 52.0 45.7 48.2 57.4 42.0 50.7 53.8 56.9

Age

F M F F F F F F F M F F F M F F F M

Gender

? 1, yes; 0, no. @ 1, diet only; 2, oral agent; 3, insulin.

23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Patient

Table 3.10 Continued

1 0 3 3 6 4 2 7 3 3 6 6 18 0 4 1 0 1

DUR 1 3 3 2 2 1 2 1 1 2 2 2 2 1 2 2 1 1

TRT@ 104 104 304 249 297 139 169 159 147 180 183 180 267 159 158 211 177 98

GLU 128 142 132 128 138 112 130 128 128 132 142 138 158 172 106 142 154 116

SBP 86 84 84 72 80 80 84 78 78 78 84 80 100 108 68 84 80 70

DBP 204 490 192 120 145 156 198 238 185 188 175 179 195 219 224 390 175 146

TC 198 540 119 85 64 111 99 157 182 308 68 189 112 294 157 645 208 97

TG 26.1 30.8 36.9 35.5 30.1 36.1 39.0 34.5 32.0 28.1 37.6 44.1 25.2 33.7 33.6 37.1 35.3 26.5

BMI 0 1 1 0 1 0 0 0 0 1 0 1 1 0 0 0 0 0

LVD?

0 0 0 0 0 1 1 0 0 0 0 0 0 1 0 0 1 1

RD?

45

EXAMPLE 3.5: IDENTIFICATION OF RISK FACTORS

Table 3.11 Summary Statistics for Eight Variables by Retinopathy Status at Follow-up Retinopathy Status No Variable

Mean

Age Duration of diabetes Fasting plasma glucose Systolic blood pressure Diastolic blood pressure Body mass index Cholesterol Triglyceride

50.0 4.2 141.8 128.0 80.3 32.3 204.4 180.5

Yes S.D.

9.0 4.5 65.6 15.7 10.8 6.3 66.0 111.1

Mean 47.2 4.8 196.3 132.6 84.9 32.5 206.8 234.4

S.D. 7.4 4.4 76.6 17.3 10.1 5.9 58.7 273.3

p Value 0.01 0.34 0.0001 0.04 0.001 0.76 0.76 0.01

2. Examine the simultaneous relationship of the variables to the development of retinopathy. Univariate analysis of each variable using the contingency table or the chi-square test gives a preliminary idea of which individual variable might be of prognostic importance. The simultaneous effect of all the variables can be analyzed by the linear logistic regression model (discussed in Section 14.2) to determine the relative importance of each. The 12 variables were ﬁtted to the linear logistic regression model using a stepwise selection procedure. The variables most signiﬁcantly related to the development of retinopathy were found to be initial treatment, fasting plasma glucose, age, and diastolic blood pressure (p 0.001). Table 3.13 gives the regression coefﬁcients of the four most signiﬁcant variables ( p 0.05), the standard errors, and adjusted odds ratios [exp(coefﬁcient)]. The p values used here are the signiﬁcance levels based on the likelihood ratio test or the improvement in the maximum likelihood due to the addition of the variable in the stepwise procedure. This method is more powerful than the Wald test, which is based on the standardized regression coefﬁcients (Chapter 14). The results are consistent with those in the univariate analysis. On the basis of the regression coefﬁcients, the probability of developing retinopathy during a 10 to 16-year follow-up can be estimated by substituting values of the risk factors into the regression equation, log

P : 9 2.373 ; 1.495 (oral agent) ; 0.882 (insulin) 19P ; 0.014 (GLU) 9 0.074 (age) ; 0.048 (DBP)

For example, for a 50-year-old patient who is on oral agents and whose fasting plasma glucose and diastolic blood pressure are 170 mg/dl and 95 mmHg,

46

EXAMPLES OF SURVIVAL DATA ANALYSIS

Table 3.12 Cumulative Incidence Rates of Retinopathy by Baseline Variables Developed Retinopathy Variable

Number of Persons at Risk

Gender Female Male Age (yr) 35 35—44 45—54 55 Duration of diabetes (yr) 4 4—7 8—11 12 Fasting plama glucose (mg/dl) 140 140—199 200 Systolic blood pressure (mmHg) 130 130—159 160 Diastolic blood pressure (mmHg) 85 85—94 95 Plasma cholesterol (mg/dl) 240 240 Plasma triglyceride (mg/dl) 250 250 Body mass index (kg/m) 28 28—33 34 Renal disease No Yes Macrovascular disease No Yes Treatment (initial) Diet alone Oral agent Insulin

p value

Number

Percent

211 101

151 77

71.6 76.2

0.384

13 101 155 43

10 77 115 26

76.9 76.2 74.2 60.5

0.242

153 113 23 23

105 86 22 15

68.6 76.1 95.7 65.2

0.033

117 90 105

62 74 92

53.0 82.2 87.6

0.001

145 149 20

95 115 18

65.5 78.8 85.7

0.016

179 87 46

118 73 37

65.9 83.9 80.4

0.004

267 45

193 35

72.3 77.8

0.442

237 75

167 61

70.5 81.3

0.064

73 121 118

49 94 85

67.1 77.7 72.0

0.261

251 61

179 49

71.3 80.3

0.155

205 107

157 71

76.6 66.4

0.053

115 158 37

62 136 29

53.9 86.1 78.4

0.001

47

EXERCISES

Table 3.13 Results of Logistic Regression Analysis

Variable

Coefﬁcient

Standard Error

92.373

1.557

1.495 0.882

0.330 0.488

4.459 2.416

4.53 1.81

0.014 90.074

0003 0019

1.014 0.929

4.67 93.89

0.048

0.015

1.049

3.20

Constant Initial treatment Oral agent Insulin Fasting plasma glucose Age Diastolic blood pressure

exp(coefﬁcient)

Coefﬁcient/S.E.

respectively, the chance of developing retinopathy in the next 10 to 16 years is 91%. The linear logistic regression model is useful in identifying important risk factors. However, complete measurements of all the variables are needed; missing data are a problem. In this example, complete data are available on most of the patients. This may not always be the case. Although there are methods of coping with missing data (discussed in Section 11.1), none is perfect. Thus it is extremely important for investigators to make every effort to obtain complete data on every subject. Bibliographical Remarks It is impossible to cite all the published examples of survival data analysis similar to those in this chapter. Other similar studies can be found in the literature: for example, Biometrics, Biometrika, Cancer, Journal of Chronic Disease, Journal of the National Cancer Institute, American Journal of Epidemiology, Journal of the American Medical Association, and New England Journal of Medicine. An easy way to ﬁnd examples is to use the National Library of Medicine’s Web site and search the ﬁle PubMed with appropriate keywords. EXERCISES The four sets of data below are taken from actual research situations. Although the data can be used for various analyses throughout the book, the reader is asked here only to describe in detail how the data can be analyzed. The data appear in examples and other exercises in subsequent chapters. 3.1 Thirty-three patients with hypernephroma were treated with combined chemotherapy, immunotherapy, and hormonal therapy. Exercise Table 3.1

48

Age

53 61 53 48 55 62 57 53 45 58 61 61 77 55 50 42

Patient

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

F M F M M F M M M M F M M M M M

Gender

3/31/77 6/18/76 2/1/77 12/19/74 11/10/75 10/7/74 10/28/74 10/6/75 4/11/77 8/4/76 1/1/77 7/25/76 5/8/75 4/27/77 4/20/77 8/24/76

Date Treatment Started 1 0 3 2 0 2 0 2 0 3 3 1 0 2 3 0

Response? 10/1/77 8/21/76 10/1/77 1/15/76 1/15/76 4/5/75 1/6/75 6/18/77 10/1/77 2/11/77 10/1/77 10/1/77 9/26/75 10/1/77 10/1/77 10/1/77

Date of Death or Last Follow-up

Exercise Table 3.1 Data for 33 Patients with Hypernephroma

0 1 0 1 1 1 1 1 0 1 0 0 1 0 0 0

Status@ 7;7 10;10 0;0 0;0 12;12 10;10 15;15 0;0 6;4 13;13 0;0 9;9 0;0 0;0 0;0 11;11

Monilia 23;23 15;20 7;7 0;0 ND 5;5 15;15 ND 4;4 13;13 8;8 12;12 0;0 0;0 14;14 7;7

Mumps

0;0 0;0 0;0 0;0 10;10 0;0 0;0 0;0 0;0 22;22 17;17 0;0 0;0 15;15 5;5 0;0

PPD

PHA

SK-SD 25;25 0;0 13;13 9;9 25;25 0;0 0;0 0;0 8;8 5;5 7;7 5;5 0;0 10;10 12;12 0;0 0;0 0;0 23;23 0;0 11;11 0;0 20;20 0;0 0;0 0;0 10;10 0;0 32;32 21;21 12;12 0;0

Skin Test ResultsA

49

50 66 58 62 71 44 69 56 57 69 60 60 72 42 57 66 59

F F M M F M M M M M M M M F M M M

1/8/75 9/8/76 2/18/75 5/12/76 10/22/76 6/6/77 6/21/76 6/7/77 11/16/76 5/10/77 6/29/77 7/21/75 7/19/75 3/3/75 2/24/77 6/15/77 3/4/77

0 3 0 0 3 3 0 2 0 0 0 3 0 0 2 3 0

6/30/75 10/1/77 10/1/77 10/17/76 12/12/76 10/1/77 10/13/76 10/1/77 12/10/76 7/25/77 7/7/77 10/1/77 10/18/75 4/23/75 10/1/77 10/1/77 4/2/77

Source: Data courtesy of Richard Ishmael. ? 0, no response; 1, complete response; 2, partial response; 3, stable. @ 0, alive; 1, dead. A ND, not done.

17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

1 0 0 1 1 0 1 0 1 1 1 0 1 1 0 0 1

0;0 9;9 0;0 2;2 10;10 10;10 0;0 0;0 11;11 0;0 0;0 11;11 10;10 0;0 5;5 0;0 0;0

0;0 10;10 0;0 ND 6;6 10;10 15;15 7;7 5;5 0;0 0;0 20;20 0;0 ND 8;8 15;15 0;0

0;0 6;6 0;0 ND 0;0 0;0 25;25 0;0 0;0 0;0 0;0 10;10 7;7 0;0 0;0 0;0 0;0

0;0 0;0 15;15 11;11 0;0 ND 3;3 2;2 12;12 0;0 20;20 0;0 25;25 0;0 0;0 0;0 20;20 0;0 15;15 0;0 26;26 0;0 18;18 0;0 10;10 0;0 0;0 0;0 25;15 0;0 10;10 0;0 16;16 0;0

50

EXAMPLES OF SURVIVAL DATA ANALYSIS

gives the age, gender, date treatment began, response status, date of death or last follow-up, survival status, and results of ﬁve pretreatment skin tests. The investigator is interested in the response and survival of the patients and in identifying prognostic factors. How would you analyze the data? 3.2 In a study undertaken to compare the treatments given to hypernephroma patients and to relate response and survival to surgery, metastasis, and treatment time, data from 58 patients were collected (Exercise Table 3.2). How would you analyze the data to answer these questions? (a) Do patients who had nephrectomy have a higher response rate? (b) Is the time of nephrectomy related to response and survival? (c) Are there signiﬁcant differences between the treatments? (d) What are the most important variables related to response and survival? 3.3 Exercise Table 3.3 gives the age, gender, family history of melanoma, remission duration, survival time, stage, and results of six pretreatment skin tests (the larger diameter is given) of 102 stage 3 and 4 melanoma patients (Lee et al., 1982). (a) Study the immunocompetence of melanoma patients by investigating skin test results. (b) Determine if age, gender, or pretreatment skin test results are predictive to remission and survival time. (c) Find theoretical distributions that describe the survival and remission patterns. 3.4 One hundred and forty-nine diabetic patients were followed for 17 years (a subset of data from Lee et al., 1988). Exercise Table 3.4 gives the survival time from baseline examination, survival status, and several potential prognostic factors at baseline: age, body mass index (BMI), age at diagnosis of diabetes, smoking status, systolic blood pressure (SBP), diastolic blood pressure (DBP), electrocardiogram reading (ECG), and whether the patient had any coronary heart disease (CHD). Identify the important prognostic factors that are associated with survival.

51

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Patient

2 1 1 2 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1

Gender

53 69 61 52 46 55 62 53 70 48 58 61 77 56 55 50 75 43 69 59 71 56 57 69

Age

1 1 0 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 1 1 1 1 0 1

Nephrectomy@ 0.0 4.0 99.0 2.0 2.0 0.0 0.0 0.0 99.0 0.0 1.5 5.0 4.0 0.0 0.0 4.0 0.0 2.0 1.0 1.5 0.0 0.0 99.0 8.0

Time of NephrectomyA

Exercise Table 3.2 Data of 58 Patients with Hypernephroma

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

TreatmentB 1 2 0 2 2 0 2 2 0 3 0 1 0 3 2 3 0 3 2 2 2 2 0 0

ResponseA 77 18 8 68 35 8 26 84 17 52 26 108 18 72 38 999 9 56 36 108 10 36 6 9

Survival Time 0 1 1 1 1 1 1 1 1 1 1 0 1 1 1 9 1 1 1 1 1 1 1 1

StatusD 1 0 1 1 0 1 1 0 1 1 1 1 1 0 1 1 1 0 1 0 1 1 1 1

0 1 0 0 1 0 0 1 0 0 1 0 0 1 1 0 0 0 1 1 0 0 0 0

Bone Metastasis@

(Continued overleaf )

Lung Metastasis@

52

25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43

Patient

1 1 1 1 2 2 1 1 1 2 1 2 1 1 2 2 1 1 1

Gender

72 67 41 77 63 42 59 62 65 53 57 60 59 75 53 67 58 62 69

Age

0 1 1 1 1 1 0 1 1 0 1 0 1 1 1 1 1 1 0

Nephrectomy@

Exercise Table 3.2 Continued

TreatmentB 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2

Time of NephrectomyA 99.0 0.0 2.0 10.0 2.0 12.0 99.0 5.0 0.0 99.0 0.0 99.0 0.0 0.0 0.0 5.0 8.0 8.0 99.0 0 9 2 0 3 0 0 0 0 0 2 0 0 3 2 3 3 0 0

ResponseA 12 5 104 6 115 9 21 14 52 9 48 15 5 28 25 25 40 16 8

Survival Time 1 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 1 1 1

StatusD

1 1 1 1 0 0 0 1 1 0 1 1 1 1 1 0 1 1 1

Lung Metastasis@

0 0 0 0 1 0 0 0 0 1 0 1 0 0 0 1 1 1 1

Bone Metastasis@

53

1 1 1 1 2 1 1 1 1 1 1 1 1 1 1

44 60 57 45 50 58 51 59 53 70 69 62 52 77 61

1 1 0 1 1 0 1 1 1 1 1 1 1 1 1

0.0 1.0 99.0 2.0 1.0 99.0 0.0 3.0 0.0 0.5 3.0 0.0 2.0 2.0 8.0

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

2 0 0 4 4 4 3 3 1 0 0 3 0 2 0

Source: Data courtesy of Richard Ishmael. ? 1, male; 2, female. @ 1, yes; 0, no. A Number of years prior to treatment; negative value — no nephrectomy. B 1, combined chemotherapy and immunotherapy, 2, others. C 0, no response; 1, complete response; 2, partial response; 3, stable; 4, increasing disease; 9, unknown. D 1, dead; 0, alive; 9, unknown.

44 45 46 47 48 49 50 51 52 53 54 55 56 57 58

70 6 8 12 20 8 999 12 181 20 14 26 16 30 20

0 1 1 1 1 1 0 1 0 1 1 1 1 1 1

1 0 1 1 1 1 0 1 1 1 1 0 1 1 1

0 1 1 0 0 0 1 0 0 1 0 0 0 0 0

54

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Patient

58 50 76 66 33 55 25 23 30 34 34 26 27 72 70 82 43 52 34 48 62 49 46 53 21 25 35

Age

2 2 1 2 1 2 2 1 1 1 1 2 1 2 2 2 1 1 1 1 1 1 1 2 2 1 2

Gender

9 0 0 9 9 0 0 0 0 9 0 0 9 9 0 0 9 9 9 0 9 9 0 1 9 9 0

Family History of Melanoma@

42.0 3.3 6.1 2.3 5.1 11.1 36.5 24.3 28.7 7.7 29.3 5.9 2.6 16.7 14.6 999.0 999.0 999.0 999.0 26.5 18.0 4.3 0.3 21.5 999.0 999.0 999.0

Remission Time (months)A 0 1 1 1 1 0 0 0 0 0 0 1 1 0 0 9 9 9 9 0 1 1 1 0 9 9 9

Remission StatusB 42.0 3.9 10.5 6.0 20.6 21.8 36.5 24.3 28.7 7.7 29.3 19.3 6.9 18.0 14.6 23.6 3.9 7.3 9.8 26.5 25.4 8.0 13.8 21.5 9.3 1.2 20.0

Survival Time (months)

Exercise Table 3.3 Data of 102 Patients with Stages 3 and 4 Melanoma

0 1 1 0 1 0 0 0 0 0 0 1 1 0 0 0 1 1 1 0 0 1 1 0 1 1 1

Survival StatusC 3B 3B 3B 3B 3B 4B 3B 3B 3B 3B 3B 3AB 3AB 4B 3B 4B 4B 4B 4B 4A 3AB 3B 3B 3A 4B 4B 4B

Stage 18 7 0 8 17 99 7 10 8 15 15 0 15 10 0 9 25 12 13 10 5 0 0 16 10 15 11

Monilia 16 8 15 0 10 99 5 20 99 99 99 99 99 99 99 99 0 99 20 99 99 99 5 20 5 10 7

Mumps 0 0 0 0 0 99 0 0 0 0 0 0 0 99 0 99 0 0 0 0 0 8 0 14 0 5 0

PPD 20 0 0 10 5 99 8 7 6 0 7 42 10 15 16 17 7 5 15 88 10 3 7 14 10 18 10

PHA

Skin Tests D

14 7 99 0 18 99 90 30 10 0 10 25 10 0 0 10 20 15 30 5 0 0 0 18 15 10 0

SK-SD

99 0 0 0 99 99 99 0 17 0 0 0 0 7 20 0 5 0 30 0 24 0 0 12 0 5 2

Tricophyton

55

28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

66 54 43 40 16 59 64 52 999 27 60 73 50 63 56 62 57 56 41 40 81 61 62 34 62 63 56 66 62 68 45 58 55

2 2 2 1 1 1 1 1 2 1 2 1 2 2 1 2 1 2 2 2 2 1 2 1 2 2 1 2 1 2 1 1 1

9 0 0 0 0 0 9 9 8 0 0 9 0 0 0 0 9 0 1 0 0 0 0 0 9 9 9 9 0 0 0 9 9

999.0 999.0 999.0 13.3 0.0 999.0 16.5 999.0 999.0 999.0 5.4 999.0 13.5 999.0 999.0 2.1 999.0 12.1 999.0 10.1 999.0 8.4 7.7 15.1 1.1 999.0 999.0 999.0 11.1 999.0 999.0 999.0 999.0 9 9 9 0 0 9 0 9 9 9 1 9 0 9 9 1 9 1 9 0 9 0 0 1 1 9 9 9 0 9 9 9 9

12.5 7.4 4.7 13.3 0.0 25.8 16.5 2.5 13.8 4.2 11.4 5.8 13.5 2.7 0.9 8.0 0.0 16.1 13.3 10.1 0.0 8.4 7.7 24.4 10.5 22.2 7.4 1.3 20.5 13.8 6.3 8.5 5.8

0 1 0 0 0 0 0 1 1 1 1 1 0 1 1 1 0 0 1 0 0 0 0 1 1 1 1 1 1 1 1 0 0

4B 4B 4B 3B 3B 4B 3B 4B 4B 4B 4B 4B 3B 4B 4B 3A 3AB 3B 4B 4A 4B 3B 3AB 3B 4A 4B 4B 4B 4B 4B 4B 3B 4B

99 99 13 0 7 0 8 9 30 10 20 0 0 0 6 0 0 0 99 0 99 0 0 0 8 0 0 0 25 20 28 10 99

99 99 19 5 10 99 7 14 75 12 10 9 8 10 6 8 24 5 99 15 99 4 11 9 99 0 99 0· 20 99 15 17 99

99 99 9 25 14 0 0 0 0 10 0 0 0 0 0 0 11 0 99 0 99 0 0 15 0 0 0 0 0 0 0 0 99

99 99 11 12 10 18 0 12 35 10 10 40 10 15 15 32 20 25 99 15 99 10 16 5 99 8 6 22 10 17 10 25 99

99 99 0 0 0 35 0 0 12 3 0 30 0 10 0 20 0 30 99 20 99 8 0 0 0 0 0 0 18 15 50 25 99

(Continued Overleaf )

99 99 30 10 0 0 0 5 0 0 0 0 5 0 0 0 0 6 99 17 99 0 23 20 0 3 0 0 15 15 17 30 99

56

61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82

Patient

63 53 45 41 43 80 75 47 64 38 27 56 60 80 38 71 57 69 17 64 91 40

Age

2 1 1 1 1 1 2 2 2 1 1 1 2 2 1 1 2 1 2 2 1 2

Gender

1 9 0 0 9 0 9 9 9 9 0 9 9 9 9 9 0 0 9 0 0 0

Family History of Melanoma@

Exercise Table 3.3 Continued

7.3 36.4 999.0 999.0 999.0 5.8 999.0 999.0 6.7 999.0 6.0 999.0 999.0 999.0 999.0 6.2 6.1 999.0 4.9 999.0 6.5 1.7

Remission Time (months)A 1 0 9 9 9 0 9 1 0 9 0 9 9 9 9 0 0 9 0 9 0 1

Remission StatusB 8.7 36.4 5.9 1.7 3.9 11.0 3.8 15.9 6.7 1.6 6.0 4.1 2.8 0.2 7.0 6.2 6.1 2.1 4.9 1.6 8.3 4.6

Survival Time (months) 0 0 1 1 1 1 1 0 0 1 0 0 0 0 0 0 0 0 0 0 1 0

Survival StatusC 3B 3B 4B 4B 4B 4B 4B 3B 3AB 4B 3B 4B 3A 4B 4B 4A 4B 4B 3B 4B 4A 3B

Stage 0 5 0 0 25 99 0 0 0 99 8 0 99 0 0 99 28 15 99 99 99 99

Monilia 9 35 0 99 0 99 99 0 5 99 15 0 99 20 0 99 20 15 99 99 99 99

Mumps 0 20 0 0 0 99 0 0 0 99 20 0 99 99 0 99 0 15 99 99 99 99

PPD

23 17 0 5 7 99 6 20 18 99 27 0 99 40 15 99 19 10 99 99 99 99

PHA

Skin Tests D

12 6 0 0 20 99 0 15 0 99 20 0 99 0 12 99 20 0 99 99 99 99

SK-SD

15 0 0 6 5 99 0 0 0 99 10 0 99 20 12 99 20 0 99 99 99 99

Tricophyton

57

63 40 53 41 27 999 45 50 47 63 52 53 60 35 24 80 999 60 60 35

1 1 1 1 1 99 2 2 1 1 1 1 2 1 2 2 99 2 2 1

0 9 9 0 9 0 9 9 9 9 9 9 9 9 9 0 0 9 9 0

7.3 999.0 999.0 21.2 999.0 999.0 999.0 999.0 999.0 999.0 999.0 999.0 999.0 999.0 1.2 999.0 4.6 0.9 999.0 5.2

0 9 9 0 9 9 9 9 9 9 9 9 9 9 0 9 1 0 9 0

? 1, male; 2, female; 99, unknown. @ 1, yes; 0, No; 9, unknown. A 999; never in remission during study period. B 1, relapsed; 0, still in remission; 9, never in remission during study period. C 1, dead; 0, still alive. D In millimeters; 99, unknown.

Source: Lee et al. (1979)

83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102

28.0 16.1 4.5 21.2 4.0 7.8 4.4 4.2 1.5 3.5 0.4 2.5 1.1 11.1 1.2 1.9 6.7 0.9 4.3 5.2

1 1 1 0 1 1 0 1 1 0 1 1 0 1 0 0 0 0 0 0

3A 4B 4B 3A 4B 4B 4B 4B 4B 4B 4B 4B 4B 4B 3B 3A 3B 3AB 4B 3B

99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99

99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99

99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99

99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99

99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99

99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99

58

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Patient

1 1 1 1 1 1 1 1 1 1 1 1 0 1 0 1 1 1 1 1 0 1

Status?

12.4 12.4 9.6 7.2 14.1 14.1 12.4 14.2 12.4 14.5 12.4 10.8 10.9 10.3 13.6 11.9 12.5 5.9 12.4 14.1 9.8 7.2

Survival Time (yr) 44 49 49 47 43 47 50 36 50 49 50 54 42 44 40 48 50 47 38 35 51 40

Age (yr) 34.2 32.6 22.0 37.9 42.2 33.1 36.5 38.5 41.5 34.1 39.5 42.9 29.8 33.2 27.5 25.3 31.6 26.3 32.4 47.0 26.5 43.9

BMI

Exercise Table 3.4 Data of 149 Diabetic Patients

41 48 35 45 42 44 48 33 47 45 48 43 36 43 26 48 44 38 36 33 47 34

Age at Diagnosis (yr) 0 2 2 0 2 0 0 2 1 0 2 0 2 2 2 0 1 1 2 1 2 0

Smoking Status@ 132 130 108 128 142 156 140 144 134 102 142 128 156 102 146 120 142 144 150 134 130 122

SBP (mmHg)

Variable at Baseline

96 72 58 76 80 94 86 88 78 68 84 74 86 58 98 68 76 82 98 78 76 92

DBP (mmHg) 1 1 1 2 1 1 2 1 1 1 1 1 1 1 1 2 1 1 2 1 1 1

ECGA 0 0 1 1 0 0 1 0 1 0 0 0 0 0 0 1 0 0 1 0 0 0

CHDB

59

23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53

1 1 0 1 1 1 1 1 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

3.5 0.0 12.1 1.9 8.6 14.0 14.3 12.4 12.4 14.4 14.2 14.5 12.4 14.3 13.7 13.4 12.5 14.4 12.6 13.8 14.0 6.8 12.4 12.9 8.9 12.4 14.5 13.0 13.4 10.6 13.9

54 53 45 41 34 38 43 45 40 44 48 51 36 52 41 49 44 37 51 47 45 38 35 50 53 48 40 43 54 52 69

32.3 34.5 18.9 32.0 33.9 23.7 24.8 26.6 39.2 32.7 33.5 32.2 24.2 31.6 30.7 28.0 32.0 32.7 24.2 18.7 25.6 22.8 30.1 27.7 27.6 28.1 31.7 26.1 30.8 36.9 24.2

52 47 40 31 30 28 43 41 35 36 43 49 30 48 39 35 29 36 42 42 36 27 33 49 49 47 37 42 54 50 63

1 2 1 1 2 0 0 2 2 2 1 2 2 1 2 2 0 2 2 0 0 2 0 1 2 1 2 2 1 1 1

132 150 134 142 124 102 134 118 192 122 122 112 142 152 112 118 152 136 134 130 108 126 132 144 126 128 132 128 142 132 148

80 88 98 90 66 60 80 66 108 78 92 74 90 96 74 84 88 88 90 78 72 66 78 88 68 70 82 80 80 80 78

0 1 0 1 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 1 0 1 0 0 0 0 0 0 1 1 0 (Continued overleaf )

1 3 1 2 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 2 1 2 1 1 1 1 1 1 2 2 1

60

54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76

Patient

1 1 1 1 1 0 1 0 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1

Status?

16.9 3.6 10.2 15.7 12.0 6.7 11.6 2.0 10.2 3.6 15.4 11.3 10.3 5.8 8.0 14.6 11.4 7.2 5.5 11.1 16.5 10.9 2.5

Survival Time (yr)

Exercise Table 3.4 Continued

38 50 64 44 38 62 47 78 49 63 71 51 59 50 66 42 40 67 86 52 42 60 75

Age (yr) 27.5 27.3 30.1 36.1 43.1 34.6 39.0 28.7 28.2 25.1 26.0 32.0 28.1 26.1 45.3 30.0 35.7 28.1 32.9 37.6 43.4 25.4 49.7

BMI 26 44 58 41 39 58 45 77 43 46 59 49 57 49 49 41 36 61 61 46 37 60 57

Age at Diagnosis (yr) 2 1 0 0 2 0 0 0 2 1 0 2 1 1 0 1 2 0 0 1 0 0 1

Smoking Status@ 170 140 138 112 140 138 130 178 158 168 146 128 132 154 154 122 144 178 162 142 120 124 174

SBP (mmHg)

Variable at Baseline

100 90 76 78 78 78 82 86 80 88 88 76 76 80 92 80 76 96 60 80 76 64 82

DBP (mmHg) 1 1 2 1 1 3 1 2 1 3 1 1 1 1 1 1 2 1 1 1 1 1 2

ECGA 0 0 1 0 0 1 0 1 0 1 0 0 1 0 0 0 1 0 0 0 0 0 1

CHDB

61

77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106

0 1 0 1 1 1 0 1 1 1 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 1 1 1

10.8 4.7 5.5 4.5 9.0 6.8 3.6 12.1 8.1 11.1 7.0 1.5 11.7 0.3 13.6 15.0 11.2 3.0 13.7 10.2 12.4 1.1 16.3 6.7 15.4 7.6 3.6 11.5 13.5 10.6

81 60 60 63 62 57 71 58 42 45 66 61 48 82 35 57 56 49 50 53 71 55 69 59 47 75 80 57 52 48

35.2 37.3 26.0 21.8 18.2 34.1 25.6 35.1 32.5 44.1 29.7 29.2 25.2 25.3 25.8 33.7 39.5 32.9 37.1 35.3 29.3 22.1 23.6 26.1 32.5 29.8 24.4 26.3 30.8 29.4

81 39 42 60 43 41 54 45 28 40 59 54 30 50 34 57 55 48 50 53 70 33 43 55 45 67 80 54 46 46

0 0 0 2 0 2 1 0 1 0 1 0 2 0 1 2 1 0 0 2 0 2 0 2 2 0 1 0 2 0

142 160 122 162 132 116 152 144 98 138 138 184 158 176 118 172 182 144 142 154 122 222 150 142 128 122 162 172 132 112

88 78 68 98 72 60 84 68 68 76 78 80 98 96 72 98 100 90 80 76 60 102 80 66 82 76 88 82 70 68

0 0 1 1 1 1 1 1 1 1 0 1 0 1 0 0 1 1 0 0 0 1 1 0 0 1 1 1 1 0 (Continued overleaf )

1 1 3 1 2 3 3 2 3 1 1 2 1 1 1 1 1 2 1 1 1 2 1 1 1 3 2 2 1 1

62

107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126

Patient

0 0 1 1 1 0 0 1 1 1 1 1 1 0 1 1 1 0 1 1

Status?

6.5 14.3 11.6 15.4 11.0 11.0 4.8 14.8 1.8 15.8 14.1 4.6 15.5 7.2 14.5 10.5 14.3 2.2 5.0 12.4

Survival Time (yr)

Exercise Table 3.4 Continued

57 58 51 33 36 52 64 31 69 59 38 49 49 68 40 36 60 74 61 54

Age (yr) 29.1 30.1 31.0 34.0 38.1 37.0 31.2 38.8 22.3 25.0 31.3 59.7 34.0 29.4 43.2 35.1 37.0 27.1 27.6 25.2

BMI 47 56 37 33 33 46 57 29 56 58 38 49 41 66 41 32 54 54 51 51

Age at Diagnosis (yr) 1 0 2 2 1 0 2 1 0 0 2 1 0 1 1 2 0 1 0 0

Smoking Status@ 138 128 132 120 122 140 172 136 152 126 104 142 128 122 122 122 122 168 162 116

SBP (mmHg)

Variable at Baseline

92 74 78 78 70 98 88 76 74 80 58 82 76 58 70 68 70 84 82 76

DBP (mmHg) 2 1 1 1 1 1 3 1 3 1 1 1 1 3 1 1 1 2 1 1

ECGA

1 0 1 0 0 0 1 0 1 0 0 0 0 1 0 0 0 1 0 0

CHDB

63

1 1 1 1 0 1 1 1 1 1 1 1 0 1 0 1 1 1 0 1 1 0 1

1.1 15.4 14.3 15.6 12.5 12.3 14.8 10.2 12.3 10.3 8.5 10.2 10.0 7.3 15.3 14.0 15.8 11.4 5.5 11.0 7.3 10.6 10.5

? Status: 0, dead; 1, alive. @ 0, no; ex-smoker; 2, current. A 1, normal; 2, borderline; 3, abnormal. B 0, no; 1, yes.

127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149

35 46 40 53 66 61 41 64 41 46 80 63 72 41 52 53 61 53 75 40 61 62 49

25.8 32.2 41.6 39.8 26.6 33.3 27.7 26.6 25.0 54.3 29.4 33.1 27.3 36.9 40.2 32.7 33.2 41.4 35.8 34.0 19.9 30.6 30.8

34 42 41 52 54 55 38 51 38 45 79 60 68 33 36 48 57 47 66 38 37 49 47

2 2 2 0 1 0 1 2 2 1 1 1 1 0 0 2 1 1 0 2 0 0 1

126 180 132 150 106 154 122 130 120 144 134 148 170 160 154 124 130 156 162 132 120 160 146

82 98 98 88 70 88 76 68 58 86 60 80 78 92 96 76 70 78 78 76 60 86 86

1 1 1 1 1 1 1 1 1 1 1 2 3 2 1 2 1 1 1 1 2 2 1

0 0 0 0 1 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 1 1 0

Statistical Methods for Survival Data Analysis. Elisa T. Lee and John Wenyu Wang Copyright ¶ 2003 John Wiley & Sons, Inc. ISBN: 0-471-36999-7

CHAPTER 4

Nonparametric Methods of Estimating Survival Functions

In this chapter we discuss methods of estimating the three survival (survivorship, density, and hazard) functions for censored data. Unfortunately, the simple method of Example 2.1 cannot be applied if some of the patients are alive at the time of analysis and therefore their exact survival times are unknown. Nonparametric or distribution-free methods are quite easy to understand and apply. They are less efﬁcient than parametric methods when survival times follow a theoretical distribution and more efﬁcient when no suitable theoretical distributions are known. Therefore, we suggest using nonparametric methods to analyze survival data before attempting to ﬁt a theoretical distribution. If the main objective is to ﬁnd a model for the data, estimates obtained by nonparametric methods and graphs can be helpful in choosing a distribution. Of the three survival functions, survivorship or its graphical presentation, the survival curve, is the most widely used. Section 4.1 introduces the product-limit (PL) method of estimating the survivorship function developed by Kaplan and Meier (1958). With the increased availability of computers, this method is applicable to small, moderate, and large samples. However, if the data have already been grouped into intervals, or the sample size is very large, say in the thousands, or the interest is in a large population, it may be more convenient to perform a life-table analysis. Section 4.2 is devoted to the discussion of population and clinical life tables. The PL estimates and life-table estimates of the survivorship function are essentially the same. Many authors use the term life-table estimates for the PL estimates. The only difference is that the PL estimate is based on individual survival times, whereas in the life-table method, survival times are grouped into intervals. The PL estimate can be considered as a special case of the life-table estimate where each interval contains only one observation. 64

-    

65

In Section 4.3 we discuss three other measures that describe the survival experience: the relative survival rate, the ﬁve-year survival rate, and the corrected survival rate. In Section 4.4 we describe two methods, direct and indirect standardization, to adjust rates to eliminate the effect of differences in population composition with respect to age and other variables. In addition, it introduces the standardized mortality rate and standardized incidence rate.

4.1 PRODUCT-LIMIT ESTIMATES OF SURVIVORSHIP FUNCTION Let us ﬁrst consider the simple case where all the patients are observed to death so that the survival times are exact and known. Let t , t , . . . , t be the exact L survival times of the n individuals under study. Conceptually, we consider this group of patients as a random sample from a much larger population of similar patients. We relabel the n survival times t , t , . . . , t in ascending order such L that t t · · · t . Following (2.1.2) and (2.1.3), the survivorship funcL tion at t can be estimated as G n9i i S (t ) : :19 G n n

(4.1.1)

where n 9 i is the number of people in the sample surviving longer than t . If G two or more t are equal (tied observations), the largest i value is used. For G example, if t : t : t , then S (t ) : S (t ) : S (t ) :

n94 n

This gives a conservative estimate for the tied observations. Since every person is alive at the beginning of the study and no one survives longer than t , L S (t ) : 1 and S (t ) : 0 L

(4.1.2)

In practice, S (t) is computed at every distinct survival time. We do not have to worry about the intervals between the distinct survival times in which no one dies and S (t) remains constant. Equations (4.1.1) and (4.1.2) show that S (t) is a step function starting at 1.0 and decreasing in steps of 1/n (if there are no ties) to zero. When S (t) is plotted versus t, the various percentiles of survival time can be read from the graph or calculated from S (t). The following example illustrates the method. Example 4.1 Consider a clinical trial in which 10 lung cancer patients are followed to death. Table 4.1 lists the survival times t in months. The function

     

66

Table 4.1 Computation of S (t) for 10 Lung Cancer Patients t 4 5 6 8 8 8 10 10 11 12

i

S (t)

1 2 3 4 5 6 7 8 9 10

: 0.9 : 0.8 : 0.7 : 0.4 : 0.4 : 0.4 : 0.2 : 0.2 : 0.1 : 0.0

S (t) is computed following (4.1.1) and plotted as a step function in Figure 4.1a and as a smooth curve in Figure 4.1b. The estimated median survival time is 8 months from Figure 4.1a or 7.6 months from Figure 4.1b. A more accurate estimate can be obtained using linear interpolation: t

S (t)

6 0.7 m 0.5 8 0.4 896 89m : 0.4 9 0.7 0.4 9 0.5 m:89

2(0.1) : 7.3(months) 0.3

Theoretically, S (t) should be plotted as a step function since it remains constant between two observed exact survival times. However, when the median survival time must be estimated from a survival curve, a smooth curve (such as Figure 4.1b) may give a much better estimate than a step function, as indicated in the example. This method can be applied only if all the patients are followed to death. If some of the patients are still alive at the end of the study, a different method of estimating S (t), such as the PL estimate given by Kaplan and Meier (1958), is required. The rationale can be illustrated by the following simple example. Suppose that 10 patients join a clinical study at the beginning of 2000;

-    

67

Figure 4.1 Function S (t) of lung cancer patients in Example 4.1.

during that year 6 patients die and 4 survive. At the end of the year, 20 additional patients join the study. In 2001, 3 patients who entered in the beginning of 2000 and 15 patients who entered later die, leaving one and ﬁve survivors, respectively. Suppose that the study terminates at the end of 2001 and you want to estimate the proportion of patients in the population surviving for two years or more, that is, S(2). The ﬁrst group of patients in this example is followed for two years; the second group is followed for only one year. One possible estimate, the reduced-sample estimate, is S (2) : 1/10 : 0.1, which ignores the 20 patients who are followed only for one year. Kaplan and Meier believe that the second sample, under observation for only one year, can contribute to the estimate of S(2). Patients who survived two years may be considered as surviving the ﬁrst year and then surviving one more year. Thus, the probability of surviving for two years or more is equal to the probability of surviving the ﬁrst year and then surviving one more year. That is, S(2) : P(surviving ﬁrst year and then surviving one more year) which can be written as S(2) : P(surviving two years given patient has survived ﬁrst year) ;P(surviving ﬁrst year)

(4.1.3)

The Kaplan—Meier estimate of S(2) following (4.1.3) is S (2) :

proportion of patients surviving two years given they survive for one year

;(proportion of patients surviving one year)

(4.1.4)

68

     

For the data given above, one of the four patients who survived the ﬁrst year survived two years, so the ﬁrst proportion in (4.1.4) is . Four of the 10 patients who entered at the beginning of 2000 and 5 of the 20 patients who entered at the end of 2000 survived one year. Therefore, the second proportion in (4.1.4) is (4 ; 5)/(10 ; 20). The PL estimate of S(2) is 4;5 1 S (2) : ; : 0.25 ; 0.3 : 0.075 4 10 ; 20 This simple rule may be generalized as follows: The probability of surviving k (2) or more years from the beginning of the study is a product of k observed survival rates: S (k) : p ; p ; p ; · · · ; p I

(4.1.5)

where p denotes the proportion of patients surviving at least one year, p the proportion of patients surviving the second year after they have survived one year, p the proportion of patients surviving the third year after they have survived two years, and p the proportion of patients surviving the kth year I after they have survived k 9 1 years. Therefore, the PL estimate of the probability of surviving any particular number of years from the beginning of study is the product of the same estimate up to the preceding year, and the observed survival rate for the particular year, that is, S (t) : S (t 9 1)p

R

(4.1.6)

The PL estimates are maximum likelihood estimates. In practice, the PL estimates can be calculated by constructing a table with ﬁve columns following the outline below. 1. Column 1 contains all the survival times, both censored and uncensored, in order from smallest to largest. Afﬁx a plus sign to the censored observation. If a censored observation has the same value as an uncensored observations, the latter should appear ﬁrst. 2. The second column, labeled i, consists of the corresponding rank of each observation in column 1. 3. The third column, labeled r, pertains to uncensored observations only. Let r : i. 4. Compute (n 9 r)/(n 9 r ; 1), or p , for every uncensored observation t G G in column 4 to give the proportion of patients surviving up to and then through t . G

-    

69

5. In column 5, S (t) is the product of all values of (n 9 r)/(n 9 r ; 1) up to and including t. If some uncensored observations are ties, the smallest S (t) should be used. To summarize this procedure, let n be the total number of patients whose survival times, censored or not, are available. Relabel the n survival times in order of increasing magnitude such that t t · · · t . Then L S (t) : t t P

n9r n9r;1

(4.1.7)

where r runs through those positive integers for which t t and t is P P uncensored. The values of r are consecutive integers 1, 2, . . . , n if there are no censored observations; if there are censored observations, they are not. The estimated median survival time is the 50th percentile, which is the value of t at S (t) : 0.50. The following example illustrates the calculation procedures. Example 4.2 Suppose that the following remission durations are observed from 10 patients (n : 10) with solid tumors. Six patients relapse at 3.0, 6.5, 6.5, 10, 12, and 15 months; 1 patient is lost to follow-up at 8.4 months; and 3 patients are still in remission at the end of the study after 4.0, 5.7, and 10 months. The calculation of S (t) is shown in Table 4.2. The survivorship function S (t) is plotted in Figure 4.2; the estimated median remission time is m : 9.8 months. From the calculation we notice that S (t) at Table 4.2 Calculation of the PL Estimate of S (t) for Data in Example 4.2 Remission Time t 3.0 4.0; 5.7; 6.5 6.5 8.4; 10.0 10.0; 12.0 15.0

Rank i

r

(n 9 r)/(n 9 r ; 1)

1 2 3 4 5 6 7 8 9 10

1 — — 4 5 — 7 — 9 10

— — — — 0

? 0.643 is used as S (6.5). It is a conservative estimate.

S (t) : 0.900 — — ; : 0.771? ;; : 0.643? — ;;; : 0.482 — ;;;; : 0.241 0

70

     

Figure 4.2 Function S (t) of Example 4.2.

t : t is related to S (t) at t : t and (4.1.6) can be rewritten as G G\ n9i S (t ) : S (t ) G G\ n 9 i ; 1

(4.1.8)

where t and t are uncensored observations. For example, G G\ S (12) : S (10) ; : 0.482 ; : 0.241 If there are no censored observations or losses before t, (4.1.7) is equivalent to (4.1.1). The variance of the PL estimate of S (t) is approximated by 1 Var[S (t)] < [S (t)] (n 9 r)(n 9 r ; 1) P

(4.1.9)

where r includes those positive integers for which t t and t corresponds P P to a death. For the data in Example 4.2, for example,

Var[S (10)] : (0.482) : 0.0352

1 1 1 1 ; ; ; 9 ; 10 6 ; 7 5 ; 6 3 ; 4

and the estimated standard error is 0.1876. In Example 4.1, Var[S (6)] : (0.7)

1 1 1 ; ; : 0.0210 9 ; 10 8 ; 9 7 ; 8

-    

71

and the estimated standard error is 0.145. The variance may be used to obtain conﬁdence intervals for S(t). Calculation of the PL estimate of S(t) in Example 4.2 can also be obtained by using statistical software. Let t denote the observed remission time (uncensored or censored) in Table 4.2 and CENS denote an index (or dummy) variable with CENS : 0 if t is censored and 1 otherwise. Assume that the data have been saved in ‘‘C:D4d2.DAT’’ as a text ﬁle, which contains two columns, t and CENS, separated by a space. The following SAS code can be used to obtain the PL estimate of S(t) in Table 4.2. One can adopt this code to obtain the PL estimate of S(t) for any observed uncensored or censored survival time data. data w1; inﬁle ‘c:d4d2.dat’ missover; input t cens; run; proc lifetest data : w1 outsurv : wa; time t*cens(0); run; title ’PL estimate of survival function’; proc print data : wa; run;

If BMDP 1L is used, the following code can be used. /input

/variable /form

/estimate

ﬁle : ‘c:d4d2.dat’. variables : 2. format : free. names : t, cens. time : t. status : cens. response : 1. method : product. Print.

/end

If the SPSS KM procedure is used, the following code can be used. data list ﬁle : ‘c:d4d2.dat’ free / t cens. km t /status : cens event (1) /print.

Example 4.3 Consider the tumor-free time in days of the 30 rats on a low-fat diet in Table 3.4. Table 4.3 gives the calculations of the PL estimates of S(t) and the standard error of S (t). The estimated S(t) is plotted in Figure 3.3. The median tumor-free time is approximately 189 days.

72

10

11

87

119

140

140;

11

15

1

16

7

12

9

8

84

86

5

6

5

4

3

2

1

i

10

73

66

13

77

65

4

9

56

12

14

50

Tumor-free Time t

3

Rat Number

—

11

10

9

8

7

6

5

4

3

2

1

r

0.073 0.077

0.900; : 0.867 0.833 0.800 0.767

— 0.088

0.633 —

0.086

0.084

0.081

0.062

(0.900)

0.667

0.700

0.733

0.068

0.933; : 0.900

(0.933)

0.967; : 0.933

(0.967)

: 0.967

S (t)

n9r n9r;1

: 0.046

1 1 1 ; ; 29;30 28;29 27;28

: 0.033

1 1 ; 29;30 28;29

1 29;30

Standard Error of S (t)

Table 4.3 Calculation of S (t) and Standard Error of S (t) for 30 Rats on a Low-Fat Diet in Table 3.4

: 0.055

73

153

177

181

191

200;

200;

200;

200;

200;

200;

200;

200;

200;

200;

200;

200;

200;

200;

6

2

7

8

17

18

19

20

21

22

23

24

25

26

27

28

29

30

13

30

29

28

27

26

25

24

23

22

21

20

19

18

17

16

15

14

13

—

—

—

—

—

—

—

—

—

—

—

—

—

—

16

15

14

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

—

0.493

0.633; : 0.598 0.598; : 0.563 0.528

—

—

—

—

—

—

—

—

—

—

—

—

—

—

0.092

0.092

0.091

0.090

74

     

The mean survival time can be shown to equal the area under the estimated survivorship function. To estimate , we can use :

S (t) dt

that is, is equal to the area under the estimated survivorship function. Thus, if the times to death are ordered as t t · · · tK (if there are m uncensored observations) and tK is the largest observation of all n observations [i.e., tK : t when t is an uncensored observation], can be estimated L L as : 1.000t ; S (t)(t 9 t) ; S (t)(t 9 t) ; · · · ; S (tK\)(tK 9 tK\)

(4.1.10)

which is the sum of the areas of the rectangles under the survival curve formed by the uncensored observations. Consider the data in Example 4.2: m : 6, t : 3.0, t : 6.5, t : 6.5, t : 10, t : 12, and t : 15. The mean survival time is estimated using (4.1.10) as : 1.000 ; 3.0 ; 0.900(6.5 9 3.0) ; 0.643(10 9 6.5) ; 0.482(12 9 10) ; 0.241(15 9 12) : 3.000 ; 3.150 ; 2.251 ; 0.964 ; 0.723 : 10.088 months However, if the largest observation in the data is censored and is used as tK in (4.10), so obtained may be a low estimate. In such cases, Irwin (1949) suggests that instead of estimating the mean survival time, one should choose a time limit L and estimate the ‘‘mean survival time limited to a time L ,’’ say , by using L for tK in (4.1.10). For example, if in Example 4.2 the largest *

observation is censored, that is, 15;, and if we let L : 16, then : 3.000 ; 3.150; ; 2.251 ; 0.964 ; 0.241(16 9 12)

: 10.329 months which is the mean survival time limited to 16 months. The variance of is estimated by A P Var( ) : (n 9 r)(n 9 r ; 1) P

(4.1.11)

where r runs through those integers for which t corresponds to a death, and P

-    

75

A is the area under the curve S (t) to the right of t . The kth A in terms of P P P the m uncensored observations is S (tI)(tI> 9 kI) ; S (tI>)(tI> 9 tI>) ; · · · ; S (tK\)(tK 9 tK\) (4.1.12) If there are no censored observations, (4.1.10) reduces to the sample mean t : t /n, and (4.1.11) reduces to G Var() : Var(t ) :

(t 9 t ) G n

(4.1.13)

which is not an unbiased estimate. Kaplan and Meier suggest that (4.1.11) and (4.1.13) be multiplied by m/(m 9 1) and n/(n 9 1), respectively, to correct the bias. Consider the survival times in Example 4.1: The sample mean is t : : 8.2 months and the estimated variance of , by (4.1.13), is 0.616. If the factor n/(n 9 1) : 10/9 is multiplied, the estimated variance of becomes 0.684. To compute the variance of in Example 4.2, we ﬁrst compute the ﬁve A ’s: P A , A , A , A , and A . The ﬁrst A is P A : S (t)(t 9 t) ; S (t)(t 9 t) ; · · · ; S (t)(t 9 t) : 3.150 ; 2.251 ; 0.964 ; 0.723 : 7.088 The second A is P A : S (t)(t 9 t) ; · · · ; S (t)(t 9 t) : 2.251 ; 0.964 ; 0.723 : 3.938 The third, fourth, and ﬁfth A ’s are, respectively, P A : 2.251 ; 0.964 ; 0.723 : 3.938 A : 0.964 ; 0.723 : 1.687 A : 0.723 Thus, ( ) : Var

(7.088) (3.938) (3.928) (1.687) (0.723) ; ; ; ; : 1.942 9 ; 10 6;7 5;6 3;4 1;2

The estimated standard error of is 1.394. If the factor m/(m 9 1) : 6/5 is included, these results become 2.330 and 1.526, respectively. The Kaplan—Meier method provides very useful estimates of survival probabilities and graphical presentation of survival distribution. It is the most

76

     

widely used method in survival data analysis. Breslow and Crowley (1974) and Meier (1975b) have shown that under certain conditions, the estimate is consistent and asymptomatically normal. However, a few critical features should be mentioned. 1. The Kaplan—Meier estimates are limited to the time interval in which the observations fall. If the largest observation is uncensored, the PL estimate at that time equals zero. Although the estimate may not be welcomed by physicians, it is correct since no one in the sample lives longer. If the largest observation is censored, the PL estimate can never equal zero and is undeﬁned beyond the largest observation. 2. The most commonly used summary statistic in survival analysis is the median survival time. A simple estimate of the median can be read from survival curves estimated by the PL method as the time t at which S (t) : 0.5. However, the solution may not be unique. Consider Figure 4.3a, where the survival curve is horizontal at S (t) : 0.5; any t value in the interval t to t is a reasonable estimate of the median. A practical solution is to take the midpoint of the interval as the PL estimate of the median. Figure 4.3b presents a different case in which the straightforward estimate (t ) tends to overestimate the median. A practical way to handle this problem is to connect the points and locate the median. 3. If less than 50% of the observations are uncensored and the largest observation is censored, the median survival time cannot be estimated. A practical way to handle the situation is to use probabilities of surviving a given length of time, say 1, 3, or 5 years, or the mean survival time limited to a given time t. 4. The PL method assumes that the censoring times are independent of the survival times. In other words, the reason an observation is censored is unrelated to the cause of death. This assumption is true if the patient is

Figure 4.3 Kaplan—Meier estimate of median survival time.

- 

77

still alive at the end of the study period. However, the assumption is violated if the patient develops severe adverse effects from the treatment and is forced to leave the study before death or if the patient died of a cause other than the one under study (e.g., death due to automobile accidents in a cancer survival study). When there is inappropriate censoring, the PL method is not appropriate. In practice, one way to alleviate the problem is to avoid it or to reduce it to a minimum. 5. Similar to other estimators, the standard error (S.E.) of the Kaplan— Meier estimator of S(t) gives an indication of the potential error of S (t). The conﬁdence interval deserves more attention than just the point estimate S (t). A 95% conﬁdence interval for S(t) is S (t) ; 1.96 S.E. [S (t)].

4.2 LIFE-TABLE ANALYSIS The life-table method is one of the oldest techniques for measuring mortality and describing the survival experience of a population. It has been used by actuaries, demographers, governmental agencies, and medical researchers in studies of survival, population growth, fertility, migration, length of married life, length of working life, and so on. There has been a decennial series of life tables on the entire U.S. population since 1900. States and local governments also publish life tables. These life tables, summarizing the mortality experience of a speciﬁc population for a speciﬁc period of time, are called population life tables. As clinical and epidemiologic research become more common, the life-table method has been applied to patients with a given disease who have been followed for a period of time. Life tables constructed for patients are called clinical life tables. Although population and clinical life tables are similar in calculation, the sources of required data are different. 4.2.1 Population Life Tables There are two kinds of population life tables: the cohort life table and current life table. The cohort life table describes the survival or mortality experience from birth to death of a speciﬁc cohort of persons who were born at about the same time, for example, all persons born in 1950. The cohort has to be followed from 1950 until all of them die. The proportion of death (survivor) is then used to construct life tables for successive calendar years. This type of table, useful in population projection and prospective studies, is not often constructed since it requires a long follow-up period. The current life table is constructed by applying the age-speciﬁc mortality rates of a population in a given period of time to a hypothetical cohort of 100,000 or 1,000,000 persons. The starting point is birth at year 0. Two sources of data are required for constructing a population life table: (1) census data on

78

     

the number of living persons at each age for a given year at midyear and (2) vital statistics on the number of deaths in the given year for each age. For example, a current U.S. life table assumes a hypothetical cohort of 100,000 persons that is subject to the age-speciﬁc death rates based on the observed data for the United States in the 1990 census. The current life table, based on the life experience of an actual population over a short period of time, gives a good summary of current mortality. This type of life table is regularly published by government agencies of different levels. One of the most often reported statistics from current life tables is the life expectancy. The term population life table is often used to refer to the current life table. In the United States, the National Center for Health Statistics publishes detailed decennial life tables after each decennial census. These complete life tables use one-year age groups. Between censuses, annual life tables are also published. The annual life tables are often seen in ﬁve-year age intervals and are called abridged life tables. Tables 4.4 and 4.5 are, respectively, a complete decennial life table for the total U.S. population for 1989—1991 and an abridged life table for the same population for 1998. The abridged table in Table 4.5 was constructed based on a complete life table. Current life tables usually have the following columns: 1. Age interval [x to x ; t). This is the time interval between two exact ages x and x ; t; t is the length of the interval. For example, the interval 20—21 includes the time interval from the 20th birthday up to the 21st birthday (but not including the 21st birthday). 2. Proportion of persons alive at beginning of age interval but dying during the interval ( q ). The information is obtained from census data. For R V example, ( q ) for age interval 20—21 is the proportion of persons who R V died on or after their 20th birthday and before their 21st birthday. It is an estimate of the conditional probability of dying in the interval given the person is alive at age x. This column is usually calculated from data of the decennial census of population and deaths occurring in the given time interval. For example, the mortality rates in Table 4.4 are calculated from the data of the 1990 Census of Population and deaths occurring in the United States in the three years 1989—1991. This column is the foundation of the life table from which all of the other columns are derived. 3. Number living at beginning of age interval (l ). The initial value of l , the V V size of the hypothetical population, is usually 100,000 or 1,000,000. The successive values are computed using the formula l : l (1 9 q ) V V\ R V\R

(4.2.1)

where 1 9 q is the proportion of persons who survived the previous age R V\R interval. For example, in Table 4.4, t : 1, l : l (1 9 q ) :

- 

79

98,314(1 9 0.00101) : 98,215, which is the number of persons living at the beginning of age 20. 4. Number dying during age interval ( d ) R V d :l ( q ) :l 9l R V V R V V V>

(4.2.2)

For example, the number of persons dying during age interval 20—21, d : 98,215(0.00104) : 102 (or d : 98,215 9 98,113 : 102). R 5. Stationary population ( L and T ). Here L is the total number of years R V V R V lived in the ith age interval or the number of person-years that l persons, V aged x exactly, live through the interval. For those who survive the interval, their contribution to L is the length of the interval, t. For those R V who die during the interval, we may not know exactly the time of death and the survival time must be estimated. The conventional assumption is that they live one-half of the interval and contribute t/2 to the calculation of L . Thus, R V L : t(l ; d ) R V V> R V

(4.2.3)

For example, in Table 4.4, L : 98,113 ; 102/2 : 98,164. If we do know the exact survival time of those who die in the interval, L should be R V computed accordingly. The symbol T is the total number of person-years lived beyond age t V by persons alive at that age, that is, T : L V jx R H

(4.2.4)

T : L ;T V R V V>R

(4.2.5)

and

For example, in Table 4.4, T : 7,536,614, which is the sum of all L values R V in column 5, and T : 7,437,356, which is T 9 L :7,536,614 9 99,258. 6. Average remaining lifetime or average number of years of life remaining at beginning of age interval (e ). This is also known as the life expectancy at G a given age, which is deﬁned as the number of years remaining to be lived by persons at age x: T e : V V l V

(4.2.6)

The expected age at death of a person aged x is x ; e . The e at x : 0 is V V the life expectancy at birth. For example, according to the U.S. life

80

Days 0—1 1—7 7—28 28—365 Years 0—1 1—2 2—3 3—4 4—5 5—6 6—7 7—8 8—9 9—10

x to x ; t

Period of Life Between Two Ages

Age Interval

Of 100,000 Born Alive

100,000 99,649 99,515 99,411 100,000 99,064 98,992 98,944 98,907 98,877 98,850 98,826 98,803 98,783

0.00936 0.00073 0.00048 0.00037 0.00030 0.00027 0.00025 0.00023 0.00020 0.00018

l V

Number Living at Beginning of Age Interval

0.00351 0.00135 0.00104 0.00349

q R V

Proportion of Persons Alive at Beginning of Age Interval Dying During Interval

Proportion Dying

936 72 48 37 30 27 24 23 20 17

351 134 104 347

d R V

Number Dying During Age Interval

Table 4.4 Life Table for the Total Population, United States, 1989--1991

99,258 99,028 98,968 98,926 98,892 98,863 98,839 98,814 98,794 98,774

274 1,637 5,722 91,625

L R V

In the Age Interval V

7,536,614 7,437,356 7,338,328 7,239,360 7,140,434 7,041,542 6,942,679 6,843,840 6,745,026 6,646,232

7,536,614 7,536,340 7,534,703 7,528,981

T

In This and All Subsequent Age Intervals

Stationary Population

75.37 75.08 74.13 73.17 72.19 71.22 70.23 69.25 68.27 67.28

75.37 75.63 75.71 75.74

e

Average Number of Years of Life Remaining at Beginning of Age Interval

Average Remaining Lifetime

81

10—11 11—12 12—13 13—14 14—15 15—16 16—17 17—18 18—19 19—20 20—21 21—22 22—23 23—24 24—25 25—26 26—27 27—28 28—29 29—30 30—31 31—32 32—33 33—34 34—35 35—36 36—37 37—38 38—39 39—40

0.00016 0.00016 0.00022 0.00032 0.00047 0.00063 0.00077 0.00089 0.00096 0.00101 0.00104 0.00109 0.00112 0.00114 0.00116 0.00117 0.00119 0.00121 0.00126 0.00133 0.00140 0.00147 0.00154 0.00162 0.00170 0.00178 0.00188 0.00198 0.00207 0.00217

98,766 98,750 98,734 98,713 98,681 98,635 98,573 98,497 98,409 98,314 98,215 98,113 98,006 97,896 97,784 97,671 97,556 97,441 97,322 97,199 97,070 96,934 96,791 96,642 96,485 96,322 96,150 95,969 95,780 95,581

16 16 21 32 46 62 76 88 95 99 102 107 110 112 113 115 115 119 123 129 136 143 149 157 163 172 181 189 199 208

98,758 98,742 98,723 98,697 98,658 98,604 98,534 98,453 98,362 98,265 98,164 98,060 97,951 97,840 97,727 97,614 97,499 97,381 97,261 97,135 97,002 96,862 96,717 96,563 96,404 96,236 96,060 95,874 95,681 95,477

6,547,458 6,448,700 6,349,958 6,251,235 6,152,538 6,053,880 5,955,276 5,856,742 5,758,289 5,659,927 5,561,662 5,463,498 5,365,438 5,267,487 5,169,647 5,071,920 4,974,306 4,876,807 4,779,426 4,682,165 4,585,030 4,488,028 4,391,166 4,294,449 4,197,886 4,101,482 4,005,246 3,909,186 3,813,312 3,717,631 (Continued overleaf )

66.29 65.30 64.31 63.33 62.35 61.38 60.41 59.46 58.51 57.57 56.63 55.69 54.75 53.81 52.87 51.93 50.99 50.05 49.11 48.17 47.23 46.30 45.37 44.44 43.51 42.58 41.66 40.73 39.81 38.90

82

40—41 41—42 42—43 43—44 44—45 45—46 46—47 47—48 48—49 49—50 50—51 51—52 52—53 53—54 54—55 55—56

x to x ; t

Period of Life Between Two Ages

Age Interval

Table 4.4 Continued

0.00228 0.00240 0.00254 0.00271 0.00292 0.00318 0.00348 0.00380 0.00414 0.00449 0.00490 0.00537 0.00590 0.00647 0.00708 0.00773

q R V

Proportion of Persons Alive at Beginning of Age Interval Dying During Interval

Proportion Dying

95,373 95,156 94,928 94,687 94,431 94,154 93,855 93,528 93,173 92,787 92,370 91,918 91,424 90,885 90.297 89,658

l V

Number Living at Beginning of Age Interval

Of 100,000 Born Alive

217 228 241 257 277 299 327 355 386 417 452 494 539 588 639 693

d R V

Number Dying During Age Interval

95,265 95,042 94,808 94,559 94,292 94,005 93,692 93,350 92,980 92,579 92,144 91,671 91,155 90,591 89.978 89,311

L R V

In the Age Interval V

3,622,154 3,526,889 3,431,847 3,337,039 3,242,480 3,148,188 3,054,183 2,960,491 2,867,141 2,774,161 2,681,582 2,589,438 2,497,767 2,406,612 2,316,021 2,226,043

T

In This and All Subsequent Age Intervals

Stationary Population

37.98 37.06 36.15 35.24 34.34 33.44 32.54 31.65 30.77 29.90 29.03 28.17 27.32 26.48 25.65 24.83

e

Average Number of Years of Life Remaining at Beginning of Age Interval

Average Remaining Lifetime

83

56—57 57—58 58—59 59—60 60—61 61—62 62—63 63—64 64—65 65—66 66—67 67—68 69—69 69—70 70—71 71—72 72—73 73—74 74—75 75—76 76—77 77—78 78—79 79—80 80—81 81—82 82—83 83—84 84—85 85—86

0.00844 0.00926 0.01019 0.01120 0.01223 0.01328 0.01439 0.01560 0.01691 0.01827 0.01967 0.02121 0.02297 0.02499 0.02727 0.02979 0.03251 0.03534 0.03824 0.04126 0.04455 0.04819 0.05239 0.05723 0.06277 0.06885 0.07535 0.08207 0.08907 0.09705

88,965 88,214 87,397 86,506 85,537 84,490 83,368 82,169 80,887 79,519 78,066 76,531 74,907 73,186 71,357 69,411 67,344 65,154 62,852 60,449 57,955 55,373 52,704 49,943 47,084 44,129 41,091 37,994 34,876 31,770

751 817 891 679 1,047 1,122 1,199 1,282 1,368 1.453 1,535 1,624 1,721 1,829 1,946 2,067 2,190 2,302 2,403 2,494 2,582 2,669 2,761 2.859 2,955 3,038 3,097 3,118 3,106 3,083

88,589 87,806 86,951 86,021 85,013 83,930 82,768 81,527 80,203 78,793 77,298 75,719 74,047 72,272 70,384 68,377 66,249 64,003 61,651 59,201 56,664 54,039 51,323 48,514 45,607 42,609 39,543 36,435 33,324 30,228

2,136,732 2,048,143 1,960,337 1,873,386 1,787,365 1,702,352 1,618,422 1,535,654 1,454,127 1,373,924 1,295,131 1,217,833 1,142,114 1,068,067 995,795 925,411 857,034 790,785 726,782 665,131 605,930 549,266 495,227 443,904 395,390 349,783 307,174 267,631 231,196 197,872 (Continued overleaf )

24.02 23.22 22.43 21.66 20.90 20.15 19.41 18.69 17.98 17.28 16.59 15.91 15.25 14.59 13.96 13.33 12.73 12.14 11.56 11.00 10.46 9.92 9.40 8.89 8.40 7.93 7.48 7.04 6.63 6.23

84

86—87 87—88 88—89 89—90 90—91 91—92

x to x ; t

Period of Life Between Two Ages

Age Interval

Table 4.4 Continued

0.10627 0.11625 0.12688 0.13834 0.15135 0.16591

q R V

Proportion of Persons Alive at Beginning of Age Interval Dying During Interval

Proportion Dying

28,687 25,638 22,658 19,783 17,046 14,466

l V

Number Living at Beginning of Age Interval

Of 100,000 Born Alive

3,049 2,980 2,875 2,737 2,580 2,400

d R V

Number Dying During Age Interval

27,163 24,148 21,220 18,415 15,757 13,266

L R V

In the Age Interval

V 167,644 140,481 116,333 95,113 76,698 60,941

T

In This and All Subsequent Age Intervals

Stationary Population

5.84 5.48 5.13 4.81 4.50 4.21

e

Average Number of Years of Life Remaining at Beginning of Age Interval

Average Remaining Lifetime

85

0.18088 0.19552 0.21000 0.22502 0.24126 0.25689 0.27175 0.28751 0.30418 0.32182 0.34049 0.36024 0.38113 0.40324 0.42663 0.45137 0.47755 0.50525

12,066 9,884 7,951 6,282 4,868 3,694 2,745 1,999 1,424 991 672 443 284 175 105 60 33 17

2,182 1,933 1,669 1,414 1,174 949 746 575 433 319 229 159 109 70 45 27 16 8

10,975 8,918 7,116 5,575 4,281 3,219 2,372 1,711 1,208 832 557 364 229 140 83 46 25 13

47,675 36,700 27,782 20,666 15,091 10,810 7,591 5,219 3,508 2,300 1,468 911 547 318 178 95 49 24

3.95 3.71 3.49 3.29 3.10 2.93 2.77 2.61 2.46 2.32 2.19 2.05 1.93 1.81 1.70 1.59 1.49 1.39

Source: U.S. Decennial L ife Tables for 1989—1991, Vol. 1, No. 1, U.S. L ife Tables, DHHS Publication PHS-98-1150-1, National Center for Health Statistics, Washington, DC, 1997.

92—93 93—94 94—95 95—96 96—97 97—98 98—99 99—100 100—101 101—102 102—103 103—104 104—105 105—106 106—107 107—108 108—109 109—110

86

0.00721 0.00139 0.00089 0.00110 0.00353 0.00476 0.00487 0.00600 0.00819 0.01176 0.01728 0.02564 0.04009 0.06302 0.09437 0.14239 0.20604 0.31641 0.46104 0.61502 0.75426 1.00000

100,000 99,279 99,141 99,053 98,944 98,595 98,126 97,648 97,062 96,267 95,135 93,491 91,094 87,442 81,931 74,199 63,634 50,523 34,537 18,614 7,166 1,761

Number Living at Beginning of Age Interval, l V 721 138 88 109 349 469 478 586 795 1,132 1,644 2,397 3,652 5,511 7,732 10,565 13,111 15,986 15,923 11,448 5,405 1,761

Number Dying During Age Interval, d R V 99,370 396,786 495,473 495,057 493,926 491,820 489,450 486,840 483,428 478,670 471,811 461,839 446,966 424,280 391,364 345,660 286,484 213,526 131,897 62,020 20,150 4,583

Stationary Population in the Age Interval, L R V 7,671,400 7,572,030 7,175,244 6,679,771 6,184,714 5,690,788 5,198,968 4,709,518 4,222,678 3,739,250 3,260,580 2,788,769 2,326,930 1,879,964 1,455,684 1,064,320 718,660 432,176 218,650 86,753 24,733 4,583

Stationary Population in This and All Subsequent Age Intervals, T V 76.7 76.3 72.4 67.4 62.5 57.7 53.0 48.2 43.5 38.8 34.3 29.8 25.5 21.5 17.8 14.3 11.3 8.6 6.3 4.7 3.5 2.6

Life Expectancy at Beginning of Age Interval, e V

Source: U.S. L ife Tables, 1998. National Vital Statistics Reports, Vol. 48, No. 18, National Center for Health Statistics, Washington, DC, 2001.

0—1 1—5 5—10 10—15 15—20 20—25 25—30 30—35 35—40 40—45 45—50 50—55 55—60 60—65 65—70 70—75 75—80 80—85 85—90 90—95 95—100 100;

Age

Proportion Dying During Age Interval, q R V

Table 4.5 Abridged Life Table for the Total Population, United States, 1998

- 

87

table for 1989—1991 the life expectancy at birth is 75.37 years and that at age 40 is 37.98 years. This means that according to the mortality rates of 1989—1991 newborns are expected to live 75.37 years and those at age 40 are expected to live another 37.98 years. The life expectancy of a population is a general indication of the capability of prolonging life. It is used to identify trends and to compare longevity. Table 4.5 shows that according to the mortality rates of 1998, the newborns and those at age 40 are expected to live 76.7 and 38.8 years, respectively. The overall life expectancy indicates an improvement in longevity in the United States over the time period. Population life tables can be constructed for various subgroups. For example, there are published life tables by gender, race, cause of death, as well as those which eliminate certain causes of death. 4.2.2 Clinical Life Tables The actuarial life table method has been applied to clinical data for many decades. Berkson and Gage (1950) and Cutler and Ederer (1958) give a life-table method for estimating the survivorship function; Gehan (1969) provides methods for estimating all three functions (survivorship, density, and hazard). The life-table method requires a fairly large number of observations, so that survival times can be grouped into intervals. Similar to the PL estimate, the life-table method incorporates all survival information accumulated up to the termination of the study. For example, in computing a ﬁve-year survival rate of breast cancer patients, one need not restrict oneself only to those patients who have entered on study for ﬁve or more years. Patients who have entered for four, three, two, and even one year contribute useful information to the evaluation of ﬁve-year survival. In this way, the life-table technique uses incomplete data such as losses to follow-up and persons withdrawn alive as well as complete death data. Table 4.6 shows the format of the clinical life table. The columns are described below. 1. Interval [t ; t ). The ﬁrst column gives the intervals into which the G G> survival times and times to loss or withdrawal are distributed. The interval is from t up to but not including t , i : 1, . . . , s. The last G G> interval has an inﬁnite length. These intervals are assumed to be ﬁxed. 2. Midpoint (t ). The midpoint of each interval, designated t , i : 1, . . . , KG KG s 9 1, is included for convenience in plotting the hazard and probability density functions. Both functions are plotted as t . KG 3. W idth (b ). The width of each interval, b : t 9 t , i : 1, . . . , , s 9 1, G G G> G is needed for calculation of the hazard and density functions. The width

88

t K t K t KG

t9t t 9t t :t G G> t 9t Q\ Q t 9Q

KQ\ —

t

Midpoint

Interval

b b b G b Q\ —

Width

l Q\ l Q

l l l G

w w w G w Q\ w Q

d d d G d Q\ d Q

Number Number Lost to Withdrawn Number Follow-up Alive Dying

Table 4.6 Format of a Life Table Number Exposed to Risk n n n n Q\ n Q

Number Entering Interval n n n G n Q\ n Q q q q G q Q\ 1

p p p G p Q\ 0

S (t ) : 1.00 S (t ) s (t ) G S (t ) Q\ S (t ) Q

Conditional Conditional Cumulative Proportion Proportion Proportion Dying Surviving Surviving

f (t ) K f (t ) K f (t ) KG f (t ) KQ\ —

Probability Density f (t ) KG

h (t ) KG h (t ) K h (t ) KG h (t ) KQ\ —

Hazard h (t ) KG

- 

4.

5.

6.

7.

8.

9.

10.

11.

12.

89

of the last interval, b , is theoretically inﬁnite; no estimate of the hazard or Q density function can be obtained for this interval. Number lost to follow-up (l ). This is the number of people who are lost G to observation and whose survival status is thus unknown in the ith interval (i : 1, . . . , s). Number withdrawn alive (w ). People withdrawn alive in the ith interval G are those known to be alive at the closing date of the study. The survival time recorded for such persons is the length of time from entrance to the closing date of the study. Number dying (d ). This is the number of people who die in the ith G interval. The survival time of these people is the time from entrance to death. Number entering the ith interval (n ). The number of people entering the G ﬁrst interval n is the total sample size. Other entries are determined from n : n 9 l 9 w 9 d . That is, the number of persons G G\ G\ G\ G\ entering the ith interval is equal to the number studied at the beginning of the preceding interval minus those who are lost to follow-up, withdrawn alive, or have died in the preceding interval. Number exposed to risk (n ). This is the number of people who are G exposed to risk in the ith interval and is deﬁned as n : n 9 (l ; w ). G G G G It is assumed that the times to loss or withdrawal are approximately uniformly distributed in the interval. Therefore, people lost or withdrawn in the interval are exposed to risk of death for one-half the interval. If there are no losses or withdrawals, n : n . G G Conditional proportion dying (q ). This is deﬁned as q : d /n for G G G G i : 1, . . . , s 9 1, and q : 1. It is an estimate of the conditional Q probability of death in the ith interval given exposure to the risk of death in the ith interval. Conditional proportion surviving (q ). This is given by p : 1 9 q , which G G G is an estimate of the conditional probability of surviving in the ith interval. Cumulative proportion surviving [S (t )]. This is an estimate of the G survivorship function at time t ; it is often referred to as the cumulative G survival rate. For i : 1, S (t ) : 1 and for i : 2, . . . , s, S (t ) : G G p S (t ). It is the usual life-table estimate and is based on the fact G\ G\ that surviving to the start of the ith interval means surviving to the start of and then through the (i 9 1)th interval. Estimated probability density function [ f (t )]. This is deﬁned as the K probability of dying in the ith interval per unit width. Thus, a natural estimate at the midpoint of the interval is f (t ) : K

S (t ) 9 S (t ) S (t )q G G\ : G G b b G G

i : 1, . . . , s 9 1

(4.2.7)

     

90

13. Hazard function [h (t )]. The hazard function for the ith interval, KG estimated at the midpoint, is 2q d G G : h (t ) : KG b (n 9 d ) b (1 ; p ) G G G G G

i : 1, . . . , s 9 1

(4.2.8)

It is the number of deaths per unit time in the interval divided by the average number of survivors at the midpoint of the interval. That is, h (t ) is derived from f (t )/S (t ) and S (t ) : [S (t ) KG KG KG KG G> ;S (t )] since S(t ) is deﬁned as the probability of surviving at the G G beginning, not the midpoint, of the ith interval: f (t ) S (t )q /b G G G KG : h (t ) : KG S (t ) S (t )( p ; 1) G G KG

(4.2.9)

which reduces to (4.2.8). Sacher (1956) derives an estimate of the hazard function by assuming that hazard is constant within an interval but varies among intervals. His estimate is h (t ) : KG

9log p G b G

(4.2.10)

In a Monte Carlo study, Gehan and Siddiqui (1973) show that (4.2.9) is less biased than (4.2.10). The large-sample approximate variances of the estimated survival functions, S (t ), f (t ), and h (t ) in the ith interval are G KG KG G\ q H Var[S (t )]< [S (t )] G G n p H H H Var[ f (t )]< KG

(4.2.11)

(4.2.12)

(4.2.13)

[S (t )q ] G\ q p G G H ; G b n p n q G H H H H H

and 1 [h (t )] KG Var[h (t )]< 19 h (t )b KG 2 KG G n q G G

Equation (4.2.11) is given by Greenwood (1926); Gehan (1969) derived (4.2.12) and (4.2.13). These may be used to obtain approximate conﬁdence intervals for the various survival functions. The graph of S (t ) can be used to ﬁnd an estimate of the median. Or let G (t , t ) be the interval such that S (t ) 0.5 and S (t ) 0.5. Then the H H> H H>

- 

91

median survival time t can be estimated by linear interpolation: K S (t ) 9 0.5 [S (t ) 9 0.5]b H H:t ; H t : t ; K H S (t ) 9 S (t ) H f (t ) H H> KH

(4.2.14)

where f (t ) is deﬁned in (4.2.7). KH Another interesting measure that can be obtained from the life table is the median remaining lifetime at time t , denoted by t (i), i : 1, . . . , s 9 1. If at t H KP G the proportion of individual survival is S (t ), the proportion of individual G survival at t (i) is S (t ). That is, one-half of the people who are alive at time G KP t are expected to be alive at time t (i) . Let (t , t ) be the interval in which G S (t ) falls; that is, S (t ) S (t ) andKPS (t ) HS (tH> ). Then an estimate of t (i) G G G H H> KP is t

b [S (t ) 9 S (t )] G H (i) : (t 9 t ) ; H KP H G S (t ) 9 S (t ) H H>

(4.2.15)

Here S (t ) is the estimated proportion surviving beyond the lower limit of the H interval containing the median. The variance of t (i) is approximately KP Var[t

KP

(i )] :

[S (t )] G 4n [ f (t )] G KH

(4.2.16)

Example 4.4 The following survival data for 2418 males with angina pectoris, originally reported by Parker et al. (1946), were also included in Gehan’s (1969) paper. Survival time is computed from time of diagnosis in years. The life table uses 16 intervals of one year. Table 4.7 gives estimates of the various survival functions, the median remaining lifetime, and their standard errors. The survivorship function, S (t), is plotted at t and the hazard and density functions, h (t) and f (t), are plotted at the midpoint of the interval (Figure 4.4). The graph of the estimated hazard function shows that the death rate is highest in the ﬁrst year after diagnosis. From the end of the ﬁrst year to the beginning of the tenth year, the death rate remains relatively constant, ﬂuctuating between 0.09 and 0.12. The hazard rate is generally higher after the tenth year. Hence, the prognosis for a patient who has survived one year is better than that for a newly diagnosed patient if factors such as age, gender, and race are not considered. A similar interpretation is reached by examining the estimated median remaining lifetimes. Initially, the estimated median remaining lifetime is 5.33 years. It reaches a peak of 6.34 years at the beginning of the second year after diagnosis and then decreases. The median survival time, either read from the survival curve or using (4.2.14), is 5.33 years and the ﬁve-year survival rate is 0.5193 with a standard error of 0.0103.

0.5 1.5 2.5 3.5 4.5 5.5 6.5 7.5 8.5 9.5 10.5 11.5 12.5 13.5 14.5 —

Source: Gehan (1969).

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 —

Year after Diagnosis Midpoint Width

0 39 22 23 24 107 133 102 68 64 45 53 33 27 23 0

Number Lost to Follow-up

0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

Number Withdrawn Alive

456 226 152 171 135 125 83 74 51 42 43 34 18 9 6 0

Number Dying 2418 1962 1697 1523 1329 1170 938 722 546 427 321 233 146 95 59 30

Number Entering Interval 2418.0 1942.5 1686.0 1511.5 1317.0 1116.5 871.5 671.0 512.0 395.0 298.5 206.5 129.5 81.5 47.5 30.0

0.1886 0.1163 0.0902 0.1131 0.1025 0.1120 0.0952 0.1103 0.0996 0.1063 0.1441 0.1646 0.1390 0.1104 0.1263 1.0000

0.8114 0.8837 0.9098 0.8869 0.8975 0.8880 0.9048 0.8897 0.9904 0.8937 0.8559 0.8354 0.8610 0.8896 0.8737 0.0000

Number Conditional Conditional Exposed Proportion Proportion to Risk Dying Surviving

Table 4.7 Life-Table Analysis of 2418 Males with Angina Pectoris

92 1.0000 0.8114 0.7170 0.6524 0.5786 0.5193 0.4611 0.4172 0.3712 0.3342 0.2987 0.2557 0.2136 0.1839 0.1636 0.1429

S (t ) G 0.1886 0.0944 0.0646 0.0738 0.0593 0.0581 0.0439 0.0460 0.0370 0.0355 0.0430 0.0421 0.0297 0.0203 0.0207 —

f (t ) KG 0.2082 0.1235 0.0944 0.1199 0.1080 0.1186 0.1000 0.1167 0.1048 0.1123 0.1552 0.1794 0.1494 0.1169 0.1348 —

h (t ) KG — 0.0080 0.0092 0.0097 0.0101 0.0103 0.0104 0.0105 0.0106 0.0107 0.0109 0.0111 0.0114 0.0118 0.0123 0.0133

0.0080 0.0060 0.0051 0.0054 0.0049 0.0050 0.0047 0.0052 0.0050 0.0053 0.0063 0.0068 0.0067 0.0065 0.0080 —

0.0097 0.0082 0.0076 0.0092 0.0093 0.0106 0.0110 0.0135 0.0147 0.0173 0.0236 0.0306 0.0351 0.0389 0.0549 —

5.33 6.35 6.34 6.23 6.22 5.91 5.60 5.17 4.94 4.83 4.69 4.00; 3.00; 2.00; 1.00; —

(Var[S (t )] (Var[ f (t )] (Var[h (t )] t (i) G KG KG KP

0.17 0.20 0.24 0.24 0.19 0.18 0.19 0.27 0.28 0.41 0.42 — — — — —

(Var[t (i)] KP

- 

Figure 4.4 Survival functions of male patients with angina pectoris.

93

     

94

Assume that survival time t (year) from each of 2418 males with angina pectoris in Example 4.4 has the same format as the data ﬁle ‘‘C:D4d2.DAT’’ deﬁned in Example 4.2 and is saved in ‘‘C:D4d4.DAT’’. Then the following SAS code can be used to produce a clinical life table such as Table 4.7. data w1; inﬁle ‘c:d4d4.dat’ missover; input t cens; run; proc lifetest data : w1 outsurv : wa method : life intervals : 0 to 15 by 1; time t*cens(0); run; title ‘Life table of the survival times’; proc print data : wa; run;

If BMDP 1L is used, the respective code is /input

/variable /form

/estimate

ﬁle : ‘c:d4d4.dat’ . variables : 2. format : free. names : t, cens. unit : year. time : t. status : cens. response : 1. method : life. Print.

/end

If the SPSS SURVIVAL procedure is used, the respective code is data list ﬁle : ‘c:d4d4.dat’ free / t cens. survival tables : t /status : cens (1) for t /intervals : thru 15 by 1 /print.

4.3 RELATIVE, FIVE-YEAR, AND CORRECTED SURVIVAL RATES Another approach to large-scale survival data is the calculation of the relative survival rate or annual survival ratio. The relative survival rate evaluates the survival experience of patients in terms of the general population. Greenwood (1926) ﬁrst suggested this approach for evaluating the efﬁcacy of cancer treatment: If the average survival time of the patients treated equals that of a

, -,    

95

random sample of persons of the same age, gender, occupation, and so on, the patients could be considered ‘‘cured.’’ Cutler et al. (1957, 1959, 1960a, b, 1967) adopted Greenwood’s idea of comparing the survival experience of cancer patients with that of the general population to ascertain (1) the ratio of observed to expected survival rates and (2) whether, in time, the mortality rate declines to a ‘‘normal’’ level. The relative survival rate is deﬁned as the ratio of the survival rate (probability of surviving one year) for a patient under study (observed rate) to someone in the general population of the same age, gender, and race (expected rate) over a speciﬁed period of time. To provide a more precise measure of the relationship of the observed and expected survival rates, Cutler et al. suggest computing the ratio for each individual follow-up year. A relative rate of 100% means that during a speciﬁc follow-up year the mortality rates in the patient and in the general population are equal. A relative rate of less than 100% means that the mortality rate in the patients is higher than that in the general population. Cutler et al. use the survival rates in the Connecticut and U.S. life tables for the general population. Using the notations in Table 4.6, the survival rate observed at time t is p , G G the expected survival rate can be computed as follows: Suppose that at time t G there are n individuals alive for whom age, gender, race, and time of G observation are known. Let p* be the survival rate of the j th individual from GH general population life tables (with corresponding age, gender, and race). The expected survival rate is 1 LY p* : G p* G GH n G H

(4.3.1)

Then the relative survival rate at time t is deﬁned by G p r: G G p* G

(4.3.2)

Example 4.5 taken from Cutler et al. (1957) illustrates the interpretation of relative survival rates. Example 4.5 A total of 9121 breast cancer cases were diagnosed in Connecticut hospitals from 1935 to 1953. The Connecticut life table for white females, 1939—1941, is used in calculation of the expected survival rate. Table 4.8 gives the observed and expected survival rates as well as the relative survival rates. Figure 4.5a graphically shows these data: the survival curves for the breast cancer patients and the general population. The relative survival rates are plotted in Figure 4.5b. For this group of patients, the relative survival rates, although increasing during 13 successive years, are less than 100% throughout the 15 years of follow-up. During each of the 15 years, the

96

      Table 4.8 Relative Survival Rates of Breast Cancer Patients in Connecticut, 1935--1953 Survival Rates (%) Years after Diagnosis 0—1 1—2 2—3 3—4 4—5 5—6 6—7 7—8 8—9 9—10 10—11 11—12 12—13 13—14 14—15

Observed

Expected

Relative Survival Rate (%)

82.9 83.3 85.9 86.8 89.2 90.0 89.9 91.6 92.0 92.7 92.9 94.0 94.1 91.5 90.6

97.2 97.1 96.9 96.7 96.6 96.4 96.4 96.2 96.1 96.1 95.9 95.8 95.3 95.3 94.9

85 86 89 90 92 93 93 95 96 96 97 98 99 96 95

Source: Cutler et al. (1957).

breast cancer patient mortality rate is greater than that of the general population. Other measures of describing survival experience of cancer patients are the ﬁve-year survival rate and the corrected rate. The ﬁve-year survival rate is simply the cumulative proportion surviving at the end of the ﬁfth year. For example, the ﬁve-year survival rate for the males with angina pectoris in Example 4.4 is 0.5193. The ﬁve-year survival rate is no longer a measure of treatment success for patients with many types of cancer since the survival of cancer patients has improved considerably in the last few decades. Berkson (1942) suggests using a corrected survival rate. This is the survival rate if the disease under study alone is the cause of death. In most survival studies, the proportion of patients surviving is usually determined without considering the cause of death, which might be unrelated to the speciﬁc illness. If p denotes the survival rate when cancer alone is the cause of death, Berkson A proposes that p p : A p

(4.3.3)

where p is the observed total survival rate in a group of cancer patients and p is the survival rate for a group of the same age and gender in the general

   

97

Figure 4.5 Survival rates of breast cancer patients in Connecticut, 1935—1953.

population. Rate p may be computed at any time after the initiation of A follow-up; it provides a measure of the proportion of patients that escaped a death from cancer up to that point. If a ﬁve-year survival rate is 0.5 and it is corrected for noncancer deaths and if we ﬁnd that ﬁve-year survival rate of the general population is 0.9, the corrected survival rate is 0.5/0.9, or 0.56. 4.4 STANDARDIZED RATES AND RATIOS Rates and ratios are often used in demography and epidemiology to describe the occurrence of a health-related event. For example, the standardized mortality (or morbidity) ratio (SMR) is frequently used in occupational epidemiology as a measure of risk, and the standardized death rate is commonly used in comparing mortality experiences of different populations or the same population at different times. The concept of the SMR is very similar to that of the relative survival rate described above. It is deﬁned as the ratio of the observed and the expected number of death and can be expressed as SMR :

observed number of deaths in study population ; 100 expected number of deaths in study population

(4.4.1)

where the expected number of deaths is the sum of the expected deaths from the same age, gender, and race groups in the general population. The standardized morbidity ratio can similarly be calculated simply by replacing the word deaths by disease cases in (4.4.1). If only new cases are of interest, we call the ratio the standardized incidence ratio (SIR).

98

     

Table 4.9 Population and Deaths of Sunny City and Happy City by Age Sunny City

Age

25 25—44 45—64 65 Total

Population

Deaths

25,000 40,000 20,000 15,000 100,000

25 50 200 1,200 1,475

Happy City Age-Speciﬁc Rates (per 1000) 1.00 1.25 10.00 80.00

Population

Deaths

55,000 20,000 21,000 4,000 100,000

110 50 315 650 1,125

Age-Speciﬁc Rates (per 1000) 2.0 2.5 15.0 162.5

The standardized death rate is only one of the many rates used to describe the health status of a population or to compare the health status of different populations. If the populations are similar with respect to demographic variables such as age, gender, or race, the crude rate, or ratio of the number of persons to whom the event under study occurred to the total number of persons in the population, can safely be used for comparison. The level of the crude rate is affected by demographic characteristics of the population for which the rate is computed. If populations have different demographic compositions, a comparison of the crude rates may be misleading. As an example consider the two hypothetical populations, Sunny City and Happy City, in Table 4.9. The crude death rate of Sunny City is 1000(1475/ 100,000) or 14.7 per 1000. The crude death rate of Happy City is 1000(1125/ 100,000), or 11.25 per 1000, which is lower than that of Sunny City even though all age-speciﬁc rates in Happy City are higher. This is mainly because there is a large proportion of older people in Sunny City. A crude death rate of a population may be relatively high merely because the population has a high proportion of older people; it may be relatively low because the population has a high proportion of younger people. Thus, one should adjust the rate to eliminate the effects of age, gender, or other differences. The procedure of adjustment is called standardization and the rate obtained after standardization is called the standardized rate. The most frequently used methods for standardization are the direct method and the indirect method. Direct Method In this method a standard population is selected. The distribution across the groups with different values of the demographic characteristic (e.g., different age groups) must be known. Let r , . . . , r , where k is the number of groups, I be the speciﬁc rates of the different groups for the population under study. Let p , . . . , p be the proportions of people in the k groups for the standard I population. The direct standardized rate is obtained by multiplying the speciﬁc

   

99

rates r by p in each group. The formula for the direct standardized rate is G G I R : rp G G G

(4.3.2)

As an example, consider the data in Table 4.9. If we choose a standard population whose distribution is shown in the second column of Table 4.10, the direct standardized death rate for Sunny City and Happy City is, respectively, 9.37 and 17.84 per 1000. These standardized rates are more reliable than the crude rates for comparison purposes. Indirect Method If the speciﬁc rates r of the population being studied are unknown, the direct G method cannot be applied. In this case, it is possible to standardize the rate by an indirect method if the following are available: 1. The number of persons to whom the event being studied occurred (D) in the population. For example, if the death rate is being standardized, D is the number of deaths. 2. The distribution across the various groups for the population being studied, denoted by n , . . . , n . I 3. The speciﬁc rates of the selected standard population, denoted by s ,...,s . I 4. The crude rate of the standard population, denoted by r. The formula for indirect standardization is R

:

D I n s G G G

r

(4.3.3)

The summation in (4.3.3) is the expected number of persons to whom the event occurred on the basis of the speciﬁc rates of the standard population. Thus, the indirect method adjusts the crude rate of the standard population by the ratio of the observed to expected number of persons to whom the event occurred in the population under study. Table 4.11 represents an example for the death rate in the states of Oklahoma and Arizona in 1960 (data are from Grove and Hetzel, 1963). The U.S. population in 1960 is used as the standard population. The crude death rate of Oklahoma (9.7 per thousand) is higher than that of Arizona (7.8 per thousand). However, the indirect standardized rates show a reverse relationship (8.6 for Oklahoma and 9.6 for Arizona). This, again, is because of the differences in age distribution. There is a higher proportion of people below the age of 25 in Arizona and a higher proportion of people above the age of 54 in Oklahoma.

100

Standard Population

420,000 280,000 220,000 80,000 1,000,000

Age

25 25—44 45—64 65 Total

0.42 0.28 0.22 0.08

Proportion, p G 1.00 1.25 10.00 80.00

Age-Speciﬁc Death Rates, r G 0.42 0.35 2.20 6.40 9.37 (R )

Age-Standardized Death Rates, pr G G

Sunny City

2.0 2.5 15.0 162.5

0.84 0.70 3.30 13.00 17.84 (R )

Age-Standardized Death Rates, pr G G

Happy City Age-Speciﬁc Death Rates, r G

Table 4.10 Standardized Death Rates by Direct Method for Sunny City and Happy City

101

9.5

0.0270 0.0011 0.0005 0.0011 0.0015 0.0030 0.0076 0.0174 0.0382 0.0875 0.1986

Source: Data from Grove and Hetzel (1963). ? n s . G G

1 1—4 5—14 15—24 25—34 35—44 45—54 55—64 65—74 75—84 85; Total Crude rates (per thousand) Observed deaths Expected deaths? Standardized rate (per thousand)

Age

Standard Population (U.S. Population, 1960) Age-Speciﬁc Death Rates, s G

22,584 25,074 22,584 9.5 : 8.6 25,074

49,103 193,644 454,972 329,230 279,327 287,994 269,147 216,036 157,385 74,848 16,598 2,328,284 9.7

Population, n G

Oklahoma

1,325.78 213.01 227.49 362.15 418.99 863.98 2,045.52 3,759.03 6,012.11 6,549.20 3,296.36 25,074

Expected Deaths, ns G G

34,599 132,367 285,830 186,789 169,873 173,029 136,573 92,871 63,634 22,499 4,092 1,302,161 7.8

Population, n G

Arizona

10,157 10,068 10,157 9.5 : 9.6 10,068

Table 4.11 Standardized Death Rates by Indirect Method for Oklahoma and Arizona, 1960

934.17 145.60 142.92 205.47 254.81 519.09 1,037.95 1,615.96 2,430.82 1,968.66 812.67 10,068

Expected Deaths, ns G G

     

102

Results for the adjusted rates depend on the standard population selected. Hence, this selection should be done carefully. When discussing death rate by age, Shryock et al. (1971) suggest that a population with similar age distribution to the various populations under study be selected as a standard. If the death rate of two populations is being compared, it is best to use the average of the two distributions as a standard. It should be remembered that speciﬁc rates are still the most accurate and essential indicators of the variations among populations. No matter which method is used, standardized rates are meaningful only when compared with similarly computed rates. Kitagawa (1964) also criticizes the standardized rate because if the speciﬁc rates vary in different ways between the two populations being compared, standardization will not indicate the differences and sometimes will even mask the differences. Nevertheless, if the speciﬁc rates are not available, if a single rate for a population is desired, or if the demographic composition of the population being compared is different, the standardized rate is useful. Bibliographical Remarks Kaplan and Meier’s (1958) PL method is the most commonly used technique for estimating the survivorship function for samples of small and moderate size. However, with the aid of a computer, it is not difﬁcult to use the method for large sample sizes. Berkson (1942), Berkson and Gage (1950), Cutler and Ederer (1958), and Gehan (1969) have written classic reports on life-table analysis. Peto et al. (1976) published an excellent review of some statistical methods related to clinical trials. The term life-table analysis that they use includes the PL method. Other references on life tables are, for example, Armitage (1971), Shryock et al. (1971), Kuzma (1967), Chiang (1968), Gross and Clark (1975), and ElandtJohnson and Johnson (1980). Relative survival rates and corrected survival rates have been used by Cutler and co-workers in a series of survival studies on cancer patients in Connecticut in the 1950s and 1960s (Cutler et al., 1957, 1959, 1960a, b, 1967; Ederer et al., 1961). Discussions of SMR, standardized rates, and related topics can be found in many standard epidemiology textbooks: for example, Mausner and Kramer (1985), Kahn (1983), Kelsey et al. (1986), Shryock et al. (1971), Chiang (1961), and Mantel and Stark (1968).

EXERCISES 4.1

Consider the survival time of the 30 melanoma patients in Table 3.1. (a) Compute and plot the PL estimates of the survivorship functions S (t) of the two treatment groups and check your results with Table 3.2 and Figure 3.1.



103

(b) Compute the variance of S (t) for every uncensored observation. (c) Estimate the median survival times of the two groups. 4.2

Do the same as in Exercise 4.1 for the remission durations of the two treatment groups in Table 3.1.

4.3

Compute and plot the PL estimates of the tumor-free time distributions for the saturated fat and unsaturated fat diet groups in Table 3.4. Compare your results with Figure 3.4.

4.4

Consider the remission data of 42 patients with acute leukemia in Example 3.3. (a) Compute and plot the PL estimates of S(t) at every time to relapse for the 6-MP and placebo groups. (b) Compute the variances of S (10) in the 6-MP group and of S (3) in the placebo group. (c) Estimate the median remission times of the two treatment groups.

4.5

(a) Compute the survival time for each patient in Exercise Table 3.1. (b) Estimate and plot the overall survivorship function using the PL method. What is the median survival time? (c) Divide the patients into two groups by gender. Compute and plot the PL estimates of the survivorship functions for each group. What is the median survival time for each?

4.6

Consider the skin test results in Exercise Table 3.1. For each of the ﬁve skin tests: (a) Divide patients into two groups according to whether they had a positive reaction. Measurements less than 10;10 (5;5 for mumps) are considered negative. (b) Estimate and plot the survivorship functions of the two groups. (c) Can you tell from the plots if any skin tests might predict survival time?

4.7

Consider the data of patients with cancer of the ovary diagnosed in Connecticut from 1935 to 1944 (Cutler et al. 1960b). Exercise Table 4.1 Exercise Table 4.1

Time from Diagnosis (yr) 0—5 5—10 10—15 15—20

Number Lost to Follow-up, l G

Number Withdrawn Alive, w G

Number Dying, d G

Number Entering, n G

18 16 8 0

0 0 67 33

731 52 14 10

949 200 132 43

     

104

reproduces the data in life-table format. Provide a life-table like Table 4.5. What do you ﬁnd out? 4.8

Do a complete life-table analysis for the two sets of data given in Table 3.5. Plot the three survival functions.

4.9

Do a complete life-table analysis of the data given in Exercise Table 4.2. Plot the three survival functions.

Exercise Table 4.2 Survival Data of Female Patients with Angina Pectoris Year After Diagnosis 0—1 1—2 2—3 3—4 4—5 5—6 6—7 7—8 8—9 9—10 10—11 11—12 12—13 13—14 14—15 15;

Number Entering Interval

Number Lost to Follow-up

Number Dying

555 473 435 400 371 338 285 234 191 153 113 86 58 35 24 14

0 8 8 7 7 28 31 32 24 27 22 23 18 9 7 11

82 30 27 22 26 25 20 11 14 13 5 5 5 2 3 3

Source: R. L. Parker et al., JAMA, 131(2), 95—100 (1946). Copyright 1946. American Medical Association.

4.10 Consider the survival times of the melanoma patients in Exercise Table 3.4. Do a complete life-table analysis of the survival time. Plot the three survival functions. 4.11 Consider the data given in Exercise Table 4.3. Compute the direct standardized death rate for the states of Oklahoma and Montana using the U.S. population of 1960 as the standard. 4.12 Given the population of Japan and Chile (Exercise Table 4.4), compute the indirect standardized death rate for the two countries using the U.S. death rate of 1960 in Table 4.11 as the standard.



105

Exercise Table 4.3

Age

1 1—4 5—14 15—24 25—34 35—44 45—54 55—64 65—74 75—84 85; Total

U.S. Population, 1960 (thousands)

Proportion, p G

4,112 16,209 35,465 24,020 22,818 24,081 20,486 15,572 10,997 4,634 929 179,323

0.023 0.091 0.198 0.134 0.127 0.134 0.114 0.087 0.061 0.026 0.005 1.000

Oklahoma Average Montana Average Death Rate Death Rate (per 1000) (per 1000) r r G G 25.5 1.2 0.5 1.2 1.6 2.9 6.9 14.8 32.4 79.0 190.4

25.8 1.2 0.5 1.6 1.8 3.1 7.5 16.3 37.3 87.3 202.8

Source: Grove and Hetzel (1963).

Exercise Table 4.4 Population (thousands) Age

1 1—4 5—14 15—24 25—34 35—44 45—54 55—64 65—74 75—84 85 Total Observed deaths

Japan

Chile

1,577 6,268 20,223 17,627 15,727 11,057 9,018 6,573 3,724 1,438 188 ———— 93,419 706,599

228 876 1,817 1,323 1,034 779 603 395 212 83 22 ——— 7,374 95,486

Source: Shryock et al. (1971).

Statistical Methods for Survival Data Analysis. Elisa T. Lee and John Wenyu Wang Copyright ¶ 2003 John Wiley & Sons, Inc. ISBN: 0-471-36999-7

CHAPTER 5

Nonparametric Methods for Comparing Survival Distributions

The problem of comparing survival distributions arises often in biomedical research. A laboratory researcher may want to compare the tumor-free times of two or more groups of rats exposed to carcinogens. A diabetologist may wish to compare the retinopathy-free times of two groups of diabetic patients. A clinical oncologist may be interested in comparing the ability of two or more treatments to prolong life or maintain health. Almost invariably, the diseasefree or survival times of the different groups vary. These differences can be illustrated by drawing graphs of the estimated survivorship functions, but that gives only a rough idea of the difference between the distributions. It does not reveal whether the differences are signiﬁcant or merely chance variations. A statistical test is necessary. In Section 5.1 we introduce ﬁve nonparametric tests that can be used for data with and without censored observations. Section 5.2 is devoted to the Mantel—Haenszel test, which is particularly useful in stratiﬁed analysis, a method commonly used to take account of possible confounding variables. In Section 5.3 we discuss the problem of comparing three or more survival distributions with or without censoring.

5.1 COMPARISON OF TWO SURVIVAL DISTRIBUTIONS Suppose that there are n and n patients who receive treatments 1 and 2, respectively. Let x , . . . , x be the r failure observations and x> , . . . , x> the P > L P n 9 r censored observations in group 1. In group 2, let y , . .. , y be the r P failure observations and y> , . . . , y> the n 9 r censored observations. That P> L is, at the end of the study n 9 r patients who received treatment 1 and n 9 r patients who received treatment 2 are still alive. Suppose that the observations in group 1 are samples from a distribution with survivorship function S (t) and the observations in group 2 are samples from a distribution 106

    

107

with survivorship function S (t). Then null hypothesis to consider is H : S (t) : S (t)

(treatments 1 and 2 are equally effective)

against the alternative H : S (t) S (t)

(treatment 1 more effective than 2)

H : S (t) S (t)

(treatment 2 more effective than 1)

H : S (t) " S (t)

(treatments 1 and 2 not equally effective)

or

or

When there are no censored observations, standard nonparametric tests can be used to compare two survival distributions. For example, the Wilcoxon (1945) test or the Mann—Whitney (1947) U-test can test the equality of two independent populations, and the sign test can be used for paired (or dependent) samples (Marascuilo and McSweeney, 1977). In the following we introduce ﬁve nonparametric tests: Gehan’s generalized Wilcoxon test (Gehan, 1965a, b), the Cox—Mantel test (Cox 1959, 1972; Mantel, 1966), the logrank test (Peto and Peto, 1972), Peto and Peto’s generalized Wilcoxon test (1972), and Cox’s F-test (1964). All the tests are designed to handle censored data; data without censored observations can be considered a special case. 5.1.1 Gehan’s Generalized Wilcoxon Test In Gehan’s generalized Wilcoxon test every observation x or x> in group 1 is G G compared with every observation y or y> in group 2 and a score U is given H GH H to the result of every comparison. For the purpose of illustration, let us assume that the alternative hypothesis is H : S (t) S (t), that is, treatment 1 is more effective than treatment 2. Deﬁne

;1

U : GH

0

91

if x y or x> y G G H H if x : y or x> y or y> x or (x > , y>) G H G H G H H G if x y or x y> H G H G

and calculate the test statistic L L W : U GH G H

(5.1.1)

where the sum is over all n n comparisons. Hence, there is a contribution to

108

     

the test statistic W for every comparison where both observations are failures (except for ties) and for every comparison where a censored observation is equal to or larger than a failure. The calculation of W is laborious when n and n are large. Mantel (1967) shows that it can be calculated in an alternative way by assigning a score to each observation based on its relative ranking. In Gehan’s computation each observation in sample 1 is compared with each in sample 2. If the two samples are combined into a single pooled sample of n ; n observations, it is the same as comparing each observation with the remaining n ; n 9 1. Let U , i : 1, . . . , n ; n , be the number of remaining G n ; n 9 1 observations that the ith is deﬁnitely greater than minus the number that it is deﬁnitely less than. The n ; n U ’s deﬁne a ﬁnite population G with mean 0 and it is true that Gehan’s L W : U G G

(5.1.2)

where summation is over the U of sample 1 only. From either (5.1.1) or (5.1.2), G it is clear that W would be a large positive number if H is true. Mantel also suggests that the permutational variance of W be used instead of the more complicated variance formula derived by Gehan. The permutational distribution of W can be obtained by considering all

n ;n (n ; n )! : n n !n ! ways of selecting n of the U at random. The test statistic W under H can be G considered approximately normally distributed with mean 0 and variance L >L n n U G G Var(W ) : (n ; n )(n ; n 9 1)

(5.1.3)

Since W is discrete, an appropriate continuity correction of 1 is ordinarily used when there are neither ties nor censored observations. Otherwise, a continuity correction of 0.5 would probably be appropriate. Since W has an asymptotically normal distribution with mean zero and variance in (5.1.3), Z : W /(Var(W ) has standard normal distribution. The rejection regions are Z Z for H , and Z 9Z for H , and Z Z for ? ? ? H where P(Z Z H ) : . ?

n! is read n factorial: n! : n(n 9 1)(n 9 2) % 3.2.1. This is called the permutational variance because it is obtained by considering the per mutational distribution of all (n ; n )!/n ! n ! W ’s

    

109

The number U can be computed in two stages. For each observation, the G ﬁrst stage yields, unity plus the number of remaining observations that it is deﬁnitely larger than, that is, R . The second stage yields R , which is unity G G plus the number of remaining observations that the particular observation is deﬁnitely less than. Then U : R 9 R . The computations of R and R can G G G G G be accomplished systematically in steps, as illustrated in the following hypothetical example. Example 5.1 Ten female patients with breast cancer are randomized to receive either CMF (cyclic administration of cyclophosphamide, methatrexate, and ﬂuorouracil) or no treatment after a radical mastectomy. At the end of two years, the following times to relapse (or remission times) in months are recorded: CMF (group 1):

23, 16;, 18;, 20;, 24;

Control (group 2):

15, 18, 19, 19, 20

The null hypothesis and the alternatives are H :S :S H :S S

(the two treatments are equally effective) (CMF more efﬁcient than no treatment)

The computations of R , R , and U are given in Table 5.1. Thus, G G G W : 1 ; 2 ; 5 ; 4 ; 6 : 18, Var(W ) : (5)(5)(208)/[(10)(9)] : 57.78, and Z : 18/(57.78 : 2.368. Suppose that the signiﬁcance level used is : 0.05, Z : 1.64; then the Z value computed is in the rejection region. Therefore, we reject H at 0.05 level and conclude that the data show that CMF is more effective than no treatment. In fact, the approximate p value corresponding to Z : 2.368 is 0.009. Note that the sum of all n ; n U ’s equals zero. This fact can be used to G check the computation. 5.1.2 Cox--Mantel Test Let t · · · t be the distinct failure times in the two groups together and I m be the number of failure times equal to t , or the multiplicity of t , so that G G G I m :r ;r G G

(5.1.4)

Further, let R(t) be the set of people still exposed to risk of failure at time t, whose failure or censoring times are at least t. Here R(t) is called the risk set at time t. Let n and n be the number of patients in R(t) that belong to R R

110

     

Table 5.1 Mantel’s Procedure of Calculating Ui for Gehan’s Generalized Wilcoxon Test Observations of Two Samples in Ascending Order

15

16>

18

18>

19

19

20

3

4

5

20>

23 24>

Computation of R G Step 1. Rank from left to right, omitting censored observations 1 Step 2. Assign next-higher rank to censored observations Step 3. Reduce the rank of tied observations to the lower rank for the value Step 4. R 1 G

2

2

2

3

2

Step 5. Rank from right to left 10 Step 6. Reduce the rank of tied observations to the lowest rank for the value Step 7. Reduce the rank of censored observations to 1 Step 8. R 10 G U :R 9R 99 G G G

9

8

6

3

Computation of R

7

6

7

3

3 3

5

6

6

7

6

5

4

3

2

1

5 5 92 92

4 1

1 1 5?

2 4?

1 1 6?

G

5

1 1 1?

8 96

1 1 2?

? From group 1.

treatment groups 1 and 2, respectively. The total number of observations, failure or censored in R(t ), is r : n ; n . Deﬁne G G R R I U:r 9 m A G G G I m (r 9 m ) G A (1 9 A ) I : G G G G r 91 G G

(5.1.5) (5.1.6)

where r is the number of observations, failure or censored, in R(t ) and A G G G

    

111

is the proportion of r that belong to group 2. An asymptotic two-sample test G is thus obtained by treating the statistic C : U/(I as a standard normal variate under the null hypothesis (Cox, 1972). The following example illustrates the procedure. Example 5.2 Consider the remission data and the hypotheses in Example 5.1. There are k : 5 distinct failure times in the two groups, r : 1 and r : 5. To perform the Cox—Mantel test, Table 5.2 is prepared for convenience: U : 5 9 (0.5 ; 0.5 ; 2 ; 0.5 ; 0.25) : 5 9 2.25 : 2.75 I:

1;9 1;7 2;4 1;3 (0.5;0.5) ; (0.5;0.5) ; (0.5;0.5) ; (0.25;0.75) 9 7 5 3

: 0.25 ; 0.25 ; 0.4 ; 0.1875 : 1.0875 : 1.64 and we reject H at 0.05 Therefore, C : 2.75/(1.0875 : 2.637 Z level and reach the same conclusion as in Example 5.1. The p value corresponding to Z : 2.637 is approximately 0.004. 5.1.3 Logrank Test Mantel’s (1966) generalization of the Savage (1956) test, often referred to as the logrank test (Peto and Peto, 1972), is based on a set of scores w assigned to G the observations. The scores are functions of the logarithm of the survival

Table 5.2 Computations of Cox--Mantel Test Number in Risk Set of: Distinct Failure Time, t 15 18 19 20 23

G

m G

Sample 1 n R

Sample 2 n R

1 1 2 1 1

5 4 3 3 2

5 4 3 1 0

r

G

10 8 6 4 2

A

G

0.5 0.5 0.5 0.25 0

112

     

function. Altshuler (1970) estimates the log survival function at t using G m 9e(t ) : 9 H G jt r G H

(5.1.7)

where m and r are as deﬁned in Section 5.1.2. The scores suggested by Peto H H and Peto are w : 1 9 e(t ) for an uncensored observation t and 9e(T ) for G G G an observation censored at T. In practice, for a censored observation t>, G w : 9e(t ), where t is the largest uncensored observation that t t>. G G H H H Thus, the larger the uncensored observation, the smaller its score. Censored observations receive negative scores. The w scores sum identically to zero for the two groups together. The logrank test is based on the sum S of the w scores of the two groups. The permutational variance of S is given by Var(S) :

n n L>L w G G (n ; n )(n ; n 9 1)

(5.1.8)

which can be rewritten as

I m (r 9 m ) n n H V : H H r (n ; n )(n ; n 9 1) H H

(5.1.9)

The test statistic L : S/(Var(S ) has an asymptotically standard normal distribution under the null hypothesis. If S is obtained from group 1, the critical region is L 9Z , and if S is obtained from group 2, the critical region is ? L Z , where is the signiﬁcance level for testing H : S : S against ? H : S S . The following example illustrates the computational procedures. Example 5.3 Consider the data and hypotheses in Example 5.1. The test statistic of the logrank test can be computed by tabulating m , r , m /r , G G G G and e(t ) as in Table 5.3. Since every observation in the two samples, censored G or not, is assigned a score, it is convenient to list them in column 1. Columns 2 to 5 pertain only to the failure times; e(t ) is the cumulative value of m /r , G G G Altshuler’s (1970) estimate of the logarithm of the survivorship function multipled by 91. For example, at t : 18, e(t ) : 0.100 ; 0.125 : 0.225; at G G t : 19, e(t ) : 0.225 ; 0.333 : 0.558. The last column, w , gives the score for G G G every observation. For an uncensored observation w : 1 9 e(t ), for example, G G at t : 18, w : 1 9 0.225 : 0.775. Since e(t ) is an estimate of a function of G G G the survivorship function, which we assume to be constant between two consecutive failures, e(t >) is equal to e(t ) for t t>. Thus w for censored G G H H G observations t> equals 9e(t ), where t t>. For example, w for 16> is G G H H G 9e(15), or 90.100, and that for 18> is 9e(18), or 90.225. Tied observations like the two 19’s receive the same score: 0.442. The 10 scores w sum to zero, G which can be used to check the computation.

    

113

Table 5.3 Computations of Logrank Test Remission Times in Both Samples, t G

m G

r

G

m /r G G

e(t ) G

w G

15 16; 18 18; 19 20 20; 23 24;

1 — 1 — 2 1 — 1 —

10 — 8 — 6 4 — 2 —

0.100 — 0.125 — 0.333 0.250 — 0.500 —

0.100 — 0.225 — 0.558 0.808 — 1.308 —

0.900? 90.100 0.775? 90.225 0.442? 0.192? 90.808 90.308 91.308

? From sample 2.

The statistic S : 0.900 ; 0.775 ; 0.442 ; 0.442 ; 0.192 : 2.751. The variance of S, computed by (5.8) is 1.210. Hence, the test statistic L : 2.751/ (1.210 : 2.5 and the p value is approximately 0.0064, data showing that CMF treatment is superior. The logrank statistic S can be shown to equal the sum of the failures observed minus the conditional failures expected computed at each failure time, or simply the difference between the observed and expected failures in one of the groups. A similar version of the logrank test is a chi-square test which compares the observed number of failures to the expected number of failures under the hypothesis. Let O and O be the observed numbers and E and E the expected numbers of death in the two treatment groups. The test statistic X :

(O 9 E ) (O 9 E ) ; E E

(5.1.10)

has approximately the chi-square distribution with 1 degree of freedom. A large X value (e.g., X ) would lead to the rejection of the null hypothesis in favor of the alternative that the two treatments are not equally effective ( : 0.05). To compute E and E , we arrange all the uncensored observations in ascending order and compute the deaths expected at each uncensored time and sum them. The number of deaths expected at an uncensored time is obtained by multiplying the deaths observed at that time by the proportion of patients exposed to risk in the treatment group. Let d be the number of deaths at time t and n and n be the numbers of patients still exposed to risk of dying at R R time up to t in the two treatment groups. The deaths expected for groups 1

114

     

and 2 at time t are n R ; d e : R n ; n R R R

n R ; d e : R n ; n R R R

(5.1.11)

Then the total numbers of deaths expected in the two groups are E :e R R

E :e R R

In practice, we only need to compute the total number of deaths expected in one of the two groups, for example, E , since E is the total observed number of deaths minus E . The following example illustrates the calculation pro cedure. Example 5.4 Let us use the hypothetical data in Example 5.1 again. The remission times in months are: CMF (group 1):

23, 16;, 18;, 20;, 24;

Control (group 2):

15, 18, 19, 19, 20.

Consider the following null and alternative hypotheses: H :S :S H :S "S

(the two treatments are equally effective) (the two treatments are not equally effective)

Table 5.4 gives the calculation of E . For example, at t : 18, four patients in group 1 and four in group 2 are still exposed to the risk of relapse, and there is one relapse. Thus, d : 1, n : n : 4, and e : 0.5. R R R R The total number of relapses expected is E : 3.75. Since there are a total of six deaths (O : 1, O : 5) in the two groups, E : 6 9 3.75 : 2.25. Using Table 5.4 Computation of E1 of Logrank Test Relapse time, t

d R

n R

n R

15 18 19 20 23 Total

1 1 2 1 1

5 4 3 3 2

5 4 3 1 0

e

R

0.5 0.5 1.0 0.75 1.0 3.75

e

R

0.5 0.5 1.0 0.25 0 2.25

    

115

(5.1.10), we have X :

(1 9 3.75) (5 9 2.25) ; : 5.378 3.75 2.25

Using Table C-2, the p value corresponding to this X value is less 0.05 (p < 0.02). Therefore, we reach the same conclusion: that there is a signiﬁcant difference in remission duration between the CMF and control groups. Computer software is available to perform a number of two-sample tests with censored observations. For example, SAS, SPSS, and BMDP provide procedures for the logrank and Cox—Mantel tests. We use the remission time of the 10 breast cancer patients in Example 5.1 to illustrate the use of these software packages. To compare the two groups, we create the following three variables: t, remission time; CENS : 0 if t is censored and 1 otherwise; and TREAT : 1 if receiving CMF and :2 if no treatment. Assume that the data have been saved in ‘‘C:D5d1.DAT’’ as a text ﬁle, which contains three columns, separated by a space (t is in the ﬁrst column, CENS the second column, and TREAT the third column), and the data in each row are for the same patient. The following SAS code can be used to perform the logrank test. data w1; inﬁle ‘c:d5d1.dat’ missover; input t cens treat; run; proc lifetest data : w1; time t*cens(0); strata treat; run;

If BMDP procedure 1L is used, the following code can be used to perform the Cox—Mantel test. /input

/variable /form

/group /estimate

/end

ﬁle : ‘c:d5d1.dat’ . variables : 3. format : free. names : t, cens, treat. time : t. status : cens. response : 1. codes(treat) : 1, 2. Names(treat) : treated, control. method : product. Group : treat. Stat : mantel.

116

     

If procedure KM in SPSS is used, the following code can be used to perform the Cox—Mantel test. data list ﬁle : ‘c:d5d1.dat’ free / t cens treat. km t by treat /status : cens event (1) /test : logrank.

These codes can be modiﬁed to perform tests comparing more than two groups simply by replacing TREAT in the codes with the group variable deﬁned. 5.1.4 Peto and Peto’s Generalized Wilcoxon Test Another generalization of Wilcoxon’s two-sample rank sum test is described by Peto and Peto (1972). Similar to the logrank test, this test assigns a score to every observation. For an uncensored observation t, the score is u : G S (t;) ; S (t9) 9 1, and for an observation censored at T, the score is u : S (T ) 9 1, where S is the Kaplan—Meier estimate of the survival function. G If we use the notation of Section 5.1.2, the score for an uncensored observation t is u : S (t ) ; S (t ) 9 1 and S (t ) : 0 and that for a censored observaG G G G\ tion is t> is u : S (t ) 9 1, where t t>. These generalized Wilcoxon scores H H H G G sum to zero. The test procedure after the scores are assigned is the same as for the logrank test. The following example illustrates the computational procedures. Example 5.5 Using the same data and hypotheses as in Example 5.1, the calculations of the scores u for Peto and Peto’s generalized Wilcoxon test are G given in Table 5.5. Using the scores of group 1, we obtain S : 90.100 9 0.212 9 0.605 9 0.408 9 0.803 : 92.128 Var(S) : (5)(5)

(0.9) ; % ; (90.803) : 0.765 10 ; 9

Thus, Z : 92.128/(0.765 : 92.433 9Z : 91.64. We reject H at the 0.05 level and reach the same conclusion as in the last three examples: that the data show that CMB is more effective than no treatment. 5.1.5 Cox’s F-test Cox’s F-test (Cox, 1964) is based on ordered scores from the exponential distribution. It is for singly censored or complete samples; it is not applicable to progressively censored data. The procedure is as follows:

    

117

Table 5.5 Computations of Peto and Peto’s Generalized Wilcoxon Test t G 15 16; 18 18; 19 19 20 20; 23 24;

S (t)

u

0.900 — 0.788 — 0.657 0.526 0.395 — 0.197 —

1 ; 0.900 9 1 : 0.900 0.900 9 1 : 90.100? 0.900 ; 0.788 9 1 : 0.688 0.788 9 1 : 90.212? 0.788 ; 0.657 9 1 : 0.445 0.526 ; 0.657 9 1 : 0.183 0.395 ; 0.526 9 1 : 90.079 0.395 9 1 : 90.605? 0.197 ; 0.395 9 1 : 904.08? 0.197 9 1 : 90.803?

G

? Group 1.

1. Rank the observations in the combined sample. 2. Replace the ranks by the corresponding expected order statistics in sampling the unit exponential distribution [ f (t) : e\R]. Denote by t the PL expected value of the rth observation in increasing order of magnitude, 1 1 t : ;%; PL n n9r;1

r : 1, . . . , n

(5.1.12)

where n is the total number of observations in the two samples. In particular, 1 t : L n 1 1 t : ; L n n 9 1

1 1 t : ; ;%;1 LL n n 9 1

(5.1.13)

For n not too large, they can easily be computed by using tables of reciprocals. When two or more observations are tied, the average of the scores is used. 3. For data without censored observations, the entire set of n observations is replaced by the set of scores t so obtained. The sample mean scores PL denoted by t and t of the two samples with n , n observations are then computed. The ratio t /t has been shown to follow an F distribution with (2n , 2n ) degrees of freedom. Critical regions for testing H : S : S

118

     

against H (S S ), H (S S ), and H (S " S ) are, respectively, t / t F , t / t F , and t /t F or t / LL? LL\? LL? t F . LL\? 4. The calculation of F is slightly different for singly censored data. Let r and r be the number of failures and n 9 r and n 9 r the number of censored observations in the two samples. Then there are p : r ; r failures in the combined sample and n 9 p censored observations. Cox (1964) suggests using the scores t , . . . , t as before for the failures and L NL t for all censored observations. The mean score, for example, for the N>L ﬁrst group is r t ; (n 9 r )t N>L t : (5.1.14) r where t is the mean score of the failures. The mean score for the second group is calculated in a similar way. The F-statistic t /t , has an approximate F-distribution with (2r , 2r ) degrees of freedom. This test is for the hypothesis that the two samples are from populations with equal means. It can also determine if the second population mean is k times the ﬁrst population mean, for a given k, by dividing the observations in the second sample by k before ranking and applying the test. The set of all values k not rejected in such a signiﬁcance test forms a conﬁdence interval. The following example illustrates the computation. Example 5.6 In an experiment comparing two treatments (A and B) for solid tumor, suppose that the question is whether treatment B is better than treatment A. Six mice are assigned to treatment A and six to treatment B. The experiment is terminated after 30 days. The following survival times in days are recorded. Our null and alternative hypotheses are H : S : S and H :S S . Treatment A: 8, 8, 10, 12, 12, 13 Treatment B: 9, 12, 15, 20, 30;, 30; That is, all the mice receiving treatment A die within 13 days and two mice receiving treatment B are still alive at the end of the study. Do the data provide sufﬁcient evidence that treatment B is more effective than treatment A? To compute the test statistic, it is convenient to set up a table like Table 5.6. The ﬁrst column lists all the observations in the two samples. The second column contains the ordered exponential scores t . In this case, n : 6, n : 6, PL n : 12, r : 6, and r : 4. The scores are computed following (5.1.12) and (5.1.13). For example, t for t : 10 is equal to 1/12 ; 1/11 ; 1/10 ; 1/9 PL G or simply the previous t plus 1/9, that is, 0.274 ; 1/9 : 0.385. The PL tied observations receive an average score: for example, for t : 12, G

    

119

Table 5.6 Computations of Cox’s F-Test for Data in Example 5.6

t

t PL

G

8 8 9 10 12 12 12 13 15 20 30; 30;

: 0.0831 0.129 ; : 0.174 ; ; : 0.174 ; 0.100 : 0.274 0.274 ; : 0.385 0.385 ; : 0.510 0.510 ; : 0.661 0.661 0.653 ; : 0.820 0.820 ; : 1.020 1.020 ; : 1.270 1.270 ; : 1.603 1.603 ; : 2.103 2.103

t of PL Sample A

t of PL Sample B

0.129 0.129 — 0.385 0.661 0.661 — 1.020 — — — — ——— 2.985

— — 0.274 — — — 0.661 — 1.270 1.603 2.103 2.103 ——— 8.014

t : (0.510 ; 0.653 ; 0.820) : 0.661. The last two columns of Table 5.6 give PL the scores for the two samples and the sums are entered at the bottom. Thus t : 2.985/6 : 0.498 and t : 8.014/4 : 2.004 according to (5.1.14) and t 0.498 F: : : 0.249 2.004 t with (12, 8) degrees of freedom. The critical region is F F : 1/F : 1/2.8486 : 0.351 for : 0.05. Hence, the data provide strong evidence that treatment B is superior to treatment A. 5.1.6 Comments on the Tests The tests presented in Sections 5.1.1 to 5.1.5 are based on rank statistics obtained from scores assigned to each observation. The ﬁrst four tests are applicable to data with progressive censoring. They can be further grouped into two categories: generalization of the Wilcoxon test (Gehan’s and Peto and Peto’s) and the non-Wilcoxon test (Cox—Mantel and logrank test). In the logrank test, if the statistic S is the sum of w scores in group 2, it is the same as U of the Cox—Mantel test. This can be seen in Examples 5.2 (U : 2.75) and 5.3 (S : 2.751); the small discrepancy is due to rounding-off errors. F : 1/F . PP? PP\?

120

     

The only reason to choose one test over another in a given circumstance is if it will be more powerful, that is, more likely to reject a false hypothesis. When sample sizes are small (n, n 50), Gehan and Thomas (1969) show that Cox’s F-test is more powerful than Gehan’s generalized Wilcoxon test if samples are from exponential or Weibull distributions and if there are no censored observations or the observations are singly censored. Comparisons of Gehan’s Wilcoxon test to several other tests are reported by Lee et al. (1975). They show that when samples are from exponential distributions, with or without censoring, the Cox—Mantel and logrank tests are more powerful and more efﬁcient than the generalized Wilcoxon tests of Gehan and Peto and Peto. There is little difference between the Cox—Mantel and logrank tests and between the two generalized Wilcoxon tests. When the samples are taken from Weibull distributions with a constant hazard ratio (i.e., the ratio of the two hazard functions does not vary with time), the results are essentially the same as in the exponential case. However, when the hazard ratio is nonconstant, the two generalizations of the Wilcoxon test have more power than the other tests. Thus, the logrank test is more powerful than the Wilcoxon tests in detecting departures when the two hazard functions are parallel (proportional hazards) or when there is random but equal censoring and when there is no censoring in the samples (Crowley and Thomas, 1975). The generalized Wilcoxon tests appear to be more powerful than the logrank test for detecting many other types of differences, for example, when the hazard functions are not parallel and when there is no censoring and the logarithm of the survival times follow the normal distribution with equal variance but possibly different means. The generalized Wilcoxon tests give more weight to early failures than later failures, whereas the logrank test gives equal weight to all failures. Therefore, the generalized Wilcoxon tests are more likely to detect early differences in the two survival distributions, whereas the logrank test is more sensitive to differences in the right tails. Prentice and Marek (1979) show that Gehan’s Wilcoxon statistic is subject to a serious criticism when censoring rates are high. If heavy censoring exists, the test statistic is dominated by a small number of early failures and has very low power. There are situations in which neither the logrank nor Wilcoxon test is very effective. When the two distributions differ but their hazard functions or survivorship functions cross, neither the Wilcoxon nor logrank test is very powerful, and it will be sensible to consider other tests. For example, Tarone and Ware (1977) discuss general statistics of similar form (using scores) and Fleming and Harrington (1979) and Fleming et al. (1980) present a two-sample test based on the maximum of a Smirnov-type statistic designed to measure the maximum distance between estimates of two distributions. The latter approach is shown to be more effective than the logrank or Wilcoxon tests when two survival distributions differ substantially for some range of t values, but not necessarily elsewhere. These statistics have not been widely applied. Interested readers are referred to the original papers.

— 

121

5.2 MANTEL--HAENSZEL TEST The Mantel—Haenszel (1959) test is particularly useful in comparing survival experience between two groups when adjustments for other prognostic factors are needed. The test has been used in many clinical and epidemiological studies as a method of controlling the effects of confounding variables. For example, in comparing two treatments for malignant melanoma, it would be important to adjust the comparison for a possible confounding variable such as stage of the disease. In studying the association of smoking and heart disease, it would be important to control the effects of age. To use the Mantel—Haenszel test, the data are stratiﬁed by the confounding variable and cast into a sequence of 2;2 tables, one for each stratum. Let s be the number of strata, n be the number of individuals in group j, HG j : 1, 2, and stratum i, i : 1, . . . , s, and d be the number of deaths (or failures) HG in group j and stratum i. For each of the s strata, the data can be represented by a 2;2 contingency table:

Group

Number of Deaths

Number of Survivors

Total

d G d G D G

n 9d G G n 9d G G S G

n G n G T G

1 2 Total

The null hypothesis to be tested can be stated as H :p :p p :p

p :p Q Q where p : P (death group j, stratum i ). Thus, the test permits simultaneous GH comparison over all the s contingency tables of the difference in survival or death probabilities for the two groups. The chi-square test statistic without continuity correction is given by X :

[Q d 9 Q (d )] G G G G Q Var(d ) G G

(5.2.1)

According to Grizzle (1967), the distribution of X without continuity correction is closer to the chi-square distribution than the X with continuity correction. His simulations show that the probability of Type I error (rejecting a true hypothesis) is better controlled without the continuity correction at : 0.01, 0.05.

122

     

where n D E(d ) : G G G T G

(5.2.2)

n n DS Var(d ) : G G G G G T (T 9 1) G G

(5.2.3)

are the mean and variance, respectively, of the number of deaths in group i computed conditionally on the contingency table marginal totals. This statistic follows the chi-square distribution with 1 degree of freedom. Thus, a computed chi-square value larger than the table chi-square value for the signiﬁcance level chosen indicates a signiﬁcant difference in survival between the two groups. The following two examples illustrate the use of the test. Example 5.7 Five hundred and ninety-ﬁve persons participate in a case control study of the association of cholesterol and coronary heart disease (CHD). Among them, 300 persons are known to have CHD and 295 are free of CHD. To ﬁnd out if elevated cholesterol is signiﬁcantly associated with CHD, the investigator decides to control the effects of smoking. The study subjects are then divided into two strata: smokers and nonsmokers. The following tables give the data for smokers:

Elevated Cholesterol? Yes No Total

With CHD

Without CHD

Total

120 80 200

20 60 80

140 140 280

With CHD

Without CHD

Total

30 70 100

60 155 215

90 255 315

and for nonsmokers:

Elevated Cholesterol? Yes No Total

— 

123

Using (5.2.2) and (5.2.3), we obtain E(d ) :

140 ; 200 : 100 280

E(d ) :

90 ; 100 : 28.571 315

Var(d ) :

140 ; 140 ; 200 ; 80 : 14.337 (280)(280 9 1)

Var(d ) :

90 ; 225 ; 100 ; 215 : 13.974 (315)(315 9 1)

Using (5.2.1) and d

: 120, d : 30, we have X :

(150 9 128.571) : 16.220 14.337 ; 13.974

which is signiﬁcant at the 0.001 level. Thus, elevated cholesterol is signiﬁcantly associated with CHD after adjusting for the effects of smoking. Example 5.8 Table 5.7 gives survival data in life-table format of male cases with localized cancer of the rectum in Connecticut for 1935—1944 and 1945—1954. We use Mantel and Haenszel’s chi-square test to see if the survival distribution of patients diagnosed in 1935—1944 is the same as for patients diagnosed in 1945—1954. The null hypothesis is that the two survival distributions are the same. It is not necessary to set up 10 contingency tables for the 10 intervals. The chi-square value is easily calculated by constructing columns 7 to 12 directly from the life table. Using the sums in columns 1, 10, and 12, we obtain X :

(330.0 9 246.50) : 52.624 132.491

which is signiﬁcant at the 0.001 level. Thus, the data show a signiﬁcant difference between the survival distributions of patients diagnosed in 1935— 1944 and 1945—1954. It should be noted that this chi-square test statistic, when applied to life tables, gives more weight to those deaths that occur in an early time interval rather than later. That is, if the two groups are subject to the same probability of surviving through the entire study period, (5.2.1)—(5.2.3) will give high mortality for the group in which early deaths occur. Mantel (1966) gives the following illustration. Consider two groups of 100 persons each. Both have 50 deaths. In group 1 all deaths occur in the ﬁrst interval, and in group 2 all deaths occur in the

124

1 2 3 4 5 6 7 8 9 10

Internal

167 45 45 19 17 11 8 5 6 7 —— 330

Deaths, d G

(1)

220.0 173.5 127.5 108.0 91.0 79.5 71.0 66.0 59.5 52.0

Survivors, n 9d G G

1935—1944

(2)

387.0 218.5 172.5 127.0 108.0 90.5 79.0 71.0 65.5 59.0

Total, n G

(3)

185 88 55 43 32 31 20 7 6 6

Deaths, d G

(4)

559.0 461.0 396.0 343.0 299.0 235.0 170.0 132.0 101.5 71.0

Survivors, n 9d G G

1945—1954

(5)

744.0 549.0 451.0 386.0 331.0 266.0 190.0 139.0 107.5 77.0

Total, n G

(6)

352 133 100 62 49 42 28 12 12 13

Deaths, D G

(7)

779.0 634.5 523.5 451.0 390.0 314.5 241.0 198.0 161.0 123.0

Survivors, S G

(8) Combined Time Periods

1131.0 767.5 623.5 513.0 439.0 356.5 269.0 210.0 173.0 136.0

Total, T G

(9)

512.45 453.86 378.67 339.35 294.05 234.66 170.22 131.06 100.04 69.64

n S /T G G G (6);(8) (9)

E(d ) G (3);(7) (9) 120.45 37.86 27.67 15.35 12.05 10.66 8.22 4.06 4.54 5.64 ——— 246.50

(11)

(10)

54.624 22.418 16.832 10.174 8.090 7.036 5.221 2.546 2.641 2.909 ———— 132.491

Var(d ) G (10);(11) (9) 9 1.0

(12)

Table 5.7 Computational Procedure for Comparing Two Survival Distributions: Male Cases with Localized Cancer of Rectum in Connecticut

COMPARISON OF K (K 2) SAMPLES

125

second interval. The contingency table for the ﬁrst interval is: Group 1 2 Total

Deaths

Survivors

Total

50 0 50

50 100 150

100 100 200

Deaths

Survivors

Total

0 50 50

50 50 100

50 100 150

and for the second interval is: Group 1 2 Total

From these two tables we have E(d ) : 100;50/200 : 25 and E(d ) : 100;50/150 : 16.67. The total deaths expected is 25 ; 16.67 : 41.67, so the 50 deaths in group 1 is 20% larger than expected. Thus, a signiﬁcant chi-square value may be obtained if early survival patterns differ signiﬁcantly in the two groups. 5.3 COMPARISON OF K (K 2) SAMPLES In this section the two-sample problem is generalized to a situation in which the data consist of K (K 2) samples, one sample from each of the K treatment populations. The problem is to decide whether the K independent samples can be regarded as coming from the same population, or in practical terms, to see if the survival data from patients receiving the K treatments provide enough evidence to conclude that the K treatments are not equally effective. This problem has been considered by many statisticians: for example, Kruskal and Wallis (1952), Mantel and Haenszel (1959), Breslow (1970), and Peto and Peto (1972). In this section two nonparametric tests for the problem are presented. The ﬁrst is Kruskal and Wallis’s (1952) H-test for uncensored data. The second is a generalization of the H-test for censored data (Peto and Peto, 1972). Both use ranks instead of the original observations and are simple to apply. 5.3.1 Kruskal--Wallis Test The Kruskal—Wallis H-test (Kruskal and Wallis, 1952; Hollander and Wolfe, 1973; Marascuilo and McSweeney, 1977), analogous to the F-test in the usual analysis of variance, uses ranks rather than original observations; it is also called the Kruskal—Wallis one-way analysis of variance by ranks. It assumes

126

     

that the variable (survival time) under study has an underlying continuous distribution. Let N be the total number of independent observations in the K samples, n the number of observations in the jth sample, j : 1, . . . , K, and t the ith H GH observation in the j th sample. The null hypothesis H states that the K samples come from the same population (or clinically, the K treatments are equally effective). In computation of the Kruskal—Wallis H-test, we ﬁrst rank all N observations from smallest to largest. Let r be the rank of t . Compute, for j : 1, . . . , K, GH GH LH R : r H GH G

R R : H H n H

1 R : (N ; 1) 2

(5.3.1)

where R and R are, respectively, the sum of the ranks and the average rank H H of the j th treatment, and R is the overall average rank. Then the Kruskal— Wallis H-statistic is 12 ) n (R 9 R ) H H N(N ; 1) H 12 ) R H 9 3(N ; 1) : N(N ; 1) n H H

H:

(5.3.2) (5.3.3)

Under the null hypothesis, H has an asymptotic (n ’s approaching inﬁnity or H n ’s are large) chi-square distribution with K 9 1 degrees of freedom. Thus, for H large n ’s, the approximate test procedure at the level is to reject H if H H . When K : 3 and the number of observations in each of the three I\? samples is 5 or fewer, the chi-square approximation is not sufﬁciently close. For such cases, exact permutational distributions of H are available and percentage points are given in Table B-4 of Appendix B. The test procedure is to reject I H if H , where satisﬁes the equation P(H H ) : . I? I? I? When there are tied observations, each is assigned the average of the ranks. To correct for the effects of ties, H is computed by (5.3.3) and then divided by 19

1 E T H N 9 N H

(5.3.4)

where g is the number of tied groups, and T : t 9 t , with t being the number H H H H of tied observations in a tied group. In counting g, an untied observation is considered as a tied group of size 1. Thus, a general expression of H corrected for ties is H:

[12/N(N ; 1)] I (R /n ) 9 3(N ; 1) H H H 1 9 E T /(N 9 N) H H

(5.3.5)

COMPARISON OF K (K 2) SAMPLES

127

Table 5.8 Cholesterol Values of 12 Subjects on Three Different Diets Diet 1 229 176 187 208

Diet 2

Diet 3

145 181 147 187

231 208 217 199

Note that when there are no ties, g : N, t : 1 for all j, and T : 0, and (5.3.5) H H reduces to (5.3.3). The following example illustrates the use of the test. Example 5.9 In a study of the relationship between cholesterol level and diet, three diets are given randomly to 12 men whose initial cholesterol levels are almost the same. Table 5.8 shows the cholesterol levels of the 12 people after having their assigned diet for a given period of time. The purpose of the study is to decide if the three diets are equally effective in controlling cholesterol level. The null hypothesis H states that there is no difference in cholesterol level of men having the three diets, and the alternative H says that the cholesterol levels of men having the three different diets are different. To compute the H-statistic, we ﬁrst rank the observations as in Table 5.9 and compute R . In H this case N : 12, n : n : n : 4, g : 10, and T : 0 except for j : 5, 7. H Table 5.9 Computation of H for Data in Example 5.9 Ordered Observations 145 147 176 181 187 187 199 208 208 217 229 231 R H

Ranks 1 2 3 4 5.5 5.5 7 8.5 8.5 10 11 12

Ranks of Diet 1

Ranks of Diet 2

— — 3 — — 5.5 — 8.5 — — 11 — 28

1 2

Ranks of Diet 3

4 5.5 —

7

— —

8.5 10

— 12.5

12 37.5

     

128

Hence, E T : 2(8 9 2) : 12, and by (5.3.5), H H H:

[12/(12;13)](784/4 ; 156.25/4 ; 1406.25/4) 9 3(13) : 6.168 1 9 12/(1728 9 12)

From Table B-4 we ﬁnd that P(H6.038 H ):0.037 and P(H6.269 H ) :0.033; we reject H at the 0.035 level. There is evidence of signiﬁcant differences among the diets. 5.3.2 Multiple Comparisons Based on the Kruskal--Wallis Test If the null hypothesis that the K samples are from the same distribution is rejected, we might ask which particular samples are from different distributions. In Example 5.9 we reject the null hypothesis that the three diets are similar. The investigator may also be interested in knowing which particular diets differ from one another. In this section we introduce some nonparametric methods for multiple comparison based on Kruskal—Wallis rank sums. An excellent treatment of multiple comparisons is given by Miller (1966). To decide which treatments differ from one another, there are K(K 9 1) decisions to make, one for each pair of treatments. The null hypothesis can be written as H : samples i and j are from the same population for i : 1, . . . , K 9 1, j : i ; 1, . . . , K, i j Let the probability of at least one wrong decision when H is true be controlled by and the probability of making all correct decisions when H is true be 1 9 . To make the K(K 9 1) decisions, we introduce the following compari son procedures. 1. When sample sizes are equal, that is, n : n : % : n : n, and n is ) small, we reject the hypothesis that the ith and jth samples, i j, are from the same distribution if R 9 R y(, K, n) G H

(5.3.6)

where y(, K, n) satisﬁes the equation P(R 9 R y(, K, n) H , i j ) : 1 9 G H

(5.3.7)

and R , R , . . . , R are given in (5.3.1). Some approximate values of y are ) given in Table B-5. 2. When sample sizes are equal to n and n is large, we introduce Miller’s (1966) procedure, that is, to reject the hypothesis that the ith and j th

COMPARISON OF K (K 2) SAMPLES

129

Table 5.10 Multiple Comparisons for Data in Example 5.9 i

j

R 9 R G H

Decision

1 1 2

2 3 3

28 9 12.5 : 15.5 28 9 37.5 : 9.5 12.5 9 37.5 : 25.0

Not signiﬁcant Not signiﬁcant Signiﬁcant

samples, i j, are from the same distribution if R 9 R q(a, K)[ K(Kn ; 1)] G H

(5.3.8)

where R , . . . , R are given in (5.3.1) and q(, K) is the upper percentile ) point of the range of K independent standard normal variables. Table B-6 gives the q(, K) values for some K and . 3. For cases of small unequal sample sizes n , . . . , n , a conservative ) procedure is to reject the hypothesis that the ith and jth samples, i j, are from the same distribution if

1 1 1 N(N ; 1) ; R 9 R (x ) ?) G H n 12 n H G

(5.3.9)

where N is the total number of observations. Values of x are given in ?) Table B-4. 4. When n , . . . , n are large, Dunn (1964) suggests the following procedure. ) Reject the hypothesis that the ith and jth samples, i j, are from the same distribution if

1 1 1 R 9 R Z N(N ; 1) ; ? ))\ 12 G H n n G H

(5.3.10)

where Z is the upper 100/[K(K 9 1)] percentage point of the ? ))\

standard normal distribution (see Table B-1). Example 5.10 Let us use the data in Example 5.9. To examine which particular diets differ from one another, we apply (5.3.6). Since K : 3, there are three possible comparisons. The calculation is shown in Table 5.10. For K : 3, n : 4, and from Table B-5, y(0.045, 3, 4) : 24; hence for (i, j ) : (2, 3), (5.3.6) is satisﬁed. Thus, at < 0.045, we conclude that diets 2 and 3 are signiﬁcantly different.

130

     

5.3.3 Test for Censored Data In Section 5.1 we introduced three nonparametric tests based on scores for comparing two samples with censored observations; Gehan’s generalized Wilcoxon test (if Mantel’s procedure is used), Peto and Peto’s generalized Wilcoxon test, and the logrank test. The K-sample test discussed in this section can be considered an extension of these tests and the Kruskal—Wallis test. Suppose that we have a set of N scores w , w , . . . , w obtained according , to the manner of scoring in one of the three tests mentioned above. The sum of the N scores is zero. Let S be the sum of the scores in the j th sample. The H null hypothesis H states that the K samples are from the same distribution. To test H we calculate ) (S /n ) X : H H H s

(5.3.11)

, w s : G G N91

(5.3.12)

where

Under the null hypothesis X has approximately chi-square distribution with K 9 1 degrees of freedom (Peto and Peto, 1972). Thus, we reject H if X exceeds the upper 100 percentage point of the chi-square distribution with K 9 1 degrees of freedom, that is, if X . I\? Example 5.11, using the scoring method of Mantel (1967) for Gehan’s generalized Wilcoxon test, illustrates the K-sample test for censored data. Example 5.11 Consider the initial remission times of leukemia patients (in days) induced by three treatments as given in Table 5.11. In this case, K : 3, N : 66, n : 25, n : 19, and n : 22. A table similar to Table 5.1 may be set up to compute the score for every observation. The computation is left to the reader as an exercise. The sums of scores in the three samples are S : 9273, S : 170, and S : 103. The sum of squares of the scores w : 89,702. G Hence, from (5.3.11) and (5.3.12), X : 3.612. From Table B-2, : 5.991; Table 5.11 Initial Remission Times of Leukemia Patients 1 4, 5, 9, 10, 12, 13, 10, 23, 28, 28, 28, 29 31, 32, 37, 41, 41, 57, 62, 74, 100, 139, 20;, 258;, 269;

2 8, 10, 10, 12, 14, 20, 48, 70, 75, 99, 103, 162, 169, 195, 220, 161;, 199;, 217;, 245;

3 8, 10, 11, 23, 25, 25, 28, 28, 31, 31, 40, 48, 89, 124, 143, 12;, 159;, 190;, 196;, 197;, 205;, 219;



131

thus we do not reject H . The data do not show signiﬁcant differences among the three initial treatments. Bibliographical Remarks Gehan’s test was ﬁrst proposed in 1965. The Cox—Mantel test was ﬁrst discussed by Cox in 1959, then by Mantel in 1966, and ﬁnally, by Cox again in 1972. The scores for the logrank test was proposed by Peto and Peto in 1972 along with another generalization of the Wilcoxon test. In the same paper, they also discuss the K-sample test for censored data. The logrank test is also discussed in Peto et al. (1977). Cox’s F-test was developed in 1964 and the Mantel—Haenszel chi-square test can be found in Mantel and Haenszel (1959) and Mantel (1966). The Kruskal—Wallis one-way analysis of variance can be found in most standard textbooks under nonparametric methods. Readers who are interested in the theoretical development or more properties of these tests should read the original papers cited above. Applications of these tests are given in the original papers or can easily be found in medical and epidemiological journals.

EXERCISES The ﬁrst ﬁve exercises are continuations of Exercises 4.1 to 4.4 and 4.6. 5.1

For the survival times given in Table 3.1, compare the survival distributions of the two treatment groups using: (a) Gehan’s generalized Wilcoxon test (b) The Cox—Mantel test

5.2

For the remission data given in Table 3.1, compare the remission time distributions of the two treatment groups using: (a) The logrank test (b) Peto and Peto’s generalized Wilcoxon test

5.3

For the data given in Table 3.4, compare the tumor-free time distributions of the three diet groups.

5.4

For the remission data of 42 leukemia patients given in Example 3.3, use the two generalized Wilcoxon tests to see if 6-MP is more effective than placebo in prolonging remission time.

5.5

For the ﬁrst four skin tests given in Exercise Table 3.1, use the Cox—Mantel and logrank tests to see if there is a signiﬁcant difference in survival between patients with positive (5 mm for mumps,10 mm for others) and negative (5 mm for mumps, 10 mm for others) reactions.

132

     

5.6

Compute the test statistic W of Gehan’s generalized Wilcoxon test by using (5.1.1) for the data in Example 5.1. Do you get the same result as in Example 5.1?

5.7

Consider the data in Example 5.11. Use Mantel’s procedure for Gehan’s generalized Wilcoxon test to compute a score for each observation and the sum of scores for each of the three treatment groups.

5.8

Using the data in Table 3.1, compare the age distributions of the two treatment groups using Cox’s F-test.

5.9

Consider the data in Exercise Table 5.1. Is elevated percent standard BMI associated with renal cell carcinoma after controlling the effects of gender? Exercise Table 5.1 Percentage of Standard BMI?

Male

Female

Case

Control

Case

Control

140 140

130 85

160 55

60 55

65 50

? Standard BMI: male, 22.1; female, 20.6. Percentage of standard BMI : (observed BMI/standard BMI);100.

5.10 Consider the survival data of men with angina pectoris in Table 4.6 and women with the same disease in Exercise Table 4.2. Is there a signiﬁcant difference between the survival distributions of men and women? 5.11 In a study of noise level and efﬁciency, 18 students were given a very simple test under three different noise levels. It is known that under

Exercise Table 5.2 1 10.5 9.0 9.5 9.0 8.5 10.0

2

3

10.0 12.0 12.5 11.0 12.0 10.5

12.0 13.0 15.5 14.0 12.5 15.0



133

normal conditions, they should be able to ﬁnish the test in 10 minutes. The students were randomly assigned to the three levels. Exercise Table 5.2 gives the time required to ﬁnish the test. Are the three noise levels signiﬁcantly different? If they are, determine which levels differ from one another. 5.12 Exercise Table 5.3 gives the survival time in weeks of 30 brain tumor patients receiving four different treatments. Are the four treatments equally effective? Exercise Table 5.3 1

2

2

3

4 5 9 12 20; 25 30;

1 4 9 12 15 23 30

3 7 14 20 27 30 32; 50;

5 15 20 31 39 47 55; 67;

Statistical Methods for Survival Data Analysis. Elisa T. Lee and John Wenyu Wang Copyright ¶ 2003 John Wiley & Sons, Inc. ISBN: 0-471-36999-7

CHAPTER 6

Some Well-Known Parametric Survival Distributions and Their Applications

Usually, there are many physical causes that lead to the failure or death of a person at a particular time. It is very difﬁcult, if not impossible, to isolate these physical causes and account mathematically for all of them. Therefore, choosing a theoretical distribution to approximate survival data is as much an art as a scientiﬁc task. In this chapter, several theoretical distributions that have been used widely to describe survival time are discussed, their characteristics summarized, and their applications illustrated.

6.1 EXPONENTIAL DISTRIBUTION The simplest and most important distribution in survival studies is the exponential distribution. In the late 1940s, researchers began to choose the exponential distribution to describe the life pattern of electronic systems. Davis (1952) gives a number of examples, including bank statement and ledger error, payroll check errors, automatic calculating machine failure, and radar set component failure, in which the failure data are well described by the exponential distribution. Epstein and Sobel (1953) report why they select the exponential distribution over the popular normal distribution and show how to estimate the parameter when data are singly censored. Epstein (1958) also discusses in some detail the justiﬁcation for the assumption of an exponential distribution. The exponential distribution has since continued to play a role in lifetime studies analogous to that of the normal distribution in other areas of statistics. The exponential distribution is often referred to as a purely random failure pattern. It is famous for its unique ‘‘lack of memory,’’ which requires that the age of the animal or person does not affect future survival. Although many 134

 

135

Figure 6.1 Exponential distribution: (a) survivorship function; (b) probability density function; (c) hazard function.

survival data cannot be described adequately by the exponential distribution, an understanding of it facilitates the treatment of more general situations. The exponential distribution is characterized by a constant hazard rate , its only parameter. A high value indicates high risk and short survival; a low value indicates low risk and long survival. Figure 6.1 depicts the survivorship function, the density function, and the hazard function of the exponential distribution with parameter . When : 1, the distribution is often referred to as the unit exponential distribution. When the survival time T follows the exponential distribution with a parameter , the probability density function is deﬁned as f (t) :

e\HR 0

t 0, t0

0

(6.1.1)

The cumulative distribution function is F(t) : 1 9 e\HR

t0

(6.1.2)

and the survivorship function is then S(t) : e\HR

t0

(6.1.3)

So that, by (2.2.1), the hazard function is h(t) :

t0

(6.1.4)

a constant, independent of t. Figure 6.1 gives the graphical presentation of the three functions. Because the exponential distribution is characterized by a constant hazard rate, independent of the age of the person, there is no aging or wearing out,

136

-   

and failure or death is a random event independent of time. When natural logarithms of the survivorship function are taken, log S(t) : 9t, which is a linear function of t. Thus, it is easy to determine whether data come from an exponential distribution by plotting log S (t) against t, where S (t) is an estimate of S(t). A linear conﬁguration indicates that the data follow an exponential distribution and the slope of the straight line is an estimate of the hazard rate . The mean and variance of the exponential distribution with parameter are, respectively, 1/ and 1/. The median is (1/) log 2. The coefﬁcient of variation is 1. A more general form of the exponential distribution is the two-parameter exponential distribution with probability density function

f (t) :

e\HR\% 0

tG tG

(6.1.5)

Then F(t) : S(t) :

1 9 e\HR\% 0 e\HR\% 0

tG tG tG tG

(6.1.6) (6.1.7)

and h(t) :

0

0tG tG

(6.1.8)

The term G is a guarantee time within which no deaths or failures can occur, or a minimum survival time. If G : 0, (6.1.5) —(6.1.8) reduce to (6.1.1)— (6.1.4) for the one-parameter exponential. The mean and the median of the two-parameter exponential distribution are, respectively, G ; 1/ and (log 2 ; G)/. Example 6.1 In a study of new anticancer drugs in the L1210 animal leukemia system, Zelen (1966) used the exponential distribution successfully as the model for survival time. The system consists of injecting a tumor inoculum into inbred mice. These tumor cells then proliferate and eventually kill the animal, but survival time may be prolonged by an active drug. Figure 6.2 shows the survival curve in a semilogarithmic scale of the untreated mice inoculated at different cell dilutions. Twenty-ﬁve mice were inoculated at each dilution. The reasonably linear conﬁgurations suggest that the survival distributions follow the exponential distribution quite well. The four straight lines ﬁtted to the points are almost parallel, indicating that the hazard rate was independent of the inoculum size. Table 6.1 gives the estimated values of the

 

137

Figure 6.2 Survival curves of untreated mice inoculated with serial 10-fold dilutions of leukemia L1210: (*) 10 cells; (■) 10 cells; ()) 10 cells; (●) 10 cells. (From Zelen, 1966.)

guarantee times G, hazard rates , and the mean survival times (in days) for the various dilutions. (Estimation procedures are discussed in Chapter 7.) Note that the estimated hazard rates, , are very close. The probability that a mouse receiving 10 cells of inoculum will survive more than 20 days is, from (6.1.7), S(20) : e\ \ < 0.0001 and the median survival time is 8.9 days. Table 6.1 Estimates of G, , and Mean Survival Time for Untreated Mice with Serial Leukemia Dilutions Dilution 10 10 10 10

G

Mean Survival Time

8.0 10.0 11.9 13.9

0.78 0.78 0.76 0.67

9.3 11.3 13.2 15.4

Source: Zelen (1966).

138

-   

Figure 6.3 Survival curves of mice treated with cyclophosphamide on day 3 after inoculation of 10 tumor cells: (*) control; (■) 80 mg/kg; (●) 160 mg/kg. (From Zelen, 1966.)

Figure 6.3 gives the survival curves of mice treated with different doses of cyclophosphamide on day 3 after receiving a 10 tumor inoculum. Table 6.2 gives the estimates of G, , and the mean survival time. Mice receiving 160 mg/kg of the drug show a remarkably improved surivival pattern over the control group. The probability that a mouse receiving 80 mg/kg of cyclophosphamide will survive more than 20 days is, from (6.1.7), S(20) : e\ \ : 0.279 The median survival time is approximately 18 days.

6.2 WEIBULL DISTRIBUTION The Weibull distribution is a generalization of the exponential distribution. However, unlike the exponential distribution, it does not assume a constant hazard rate and therefore has broader application. The distribution was proposed by Weibull (1939) and its applicability to various failure situations discussed again by Weibull (1951). It has then been used in many studies of reliability and human disease mortality. The Weibull distribution is characterized by two parameters, and . The value of determines the shape of the distribution curve and the value of

 

139

Table 6.2 Estimates of G, , and Mean Survival Time for Treated Mice on Day 3 Dose (mg/kg) Control 80 160

G

Mean Survival Time

8.7 15.6 21.5

1.12 0.29 0.10

9.6 19.0 31.5

Source: Zelen (1966).

determines its scaling. Consequently, and are called the shape and scale parameters, respectively. The relationship between the value of and survival time can be seen from Figure 6.4, which shows the hazard rate of the Weibull distribution with : 0.5, 1, 2, 4. When : 1, the hazard rate remains constant as time increases; this is the exponential case. The hazard rate increases when 1 and decreases when 1 as t increases. Thus, the Weibull distribution may be used to model the survival distribution of a population with increasing, decreasing, or constant risk. Examples of increasing and decreasing hazard rates are, respectively, patients with lung cancer and patients who undergo successful major surgery. The probability density function and cumulative distribution functions are, respectively, f (t) : (t)A\e\HR A t 0, , 0

Figure 6.4 Hazard functions of Weibull distribution with : 1.

(6.2.1)

140

-   

and F(t) : 1 9 e\HRA

(6.2.2)

The survivorship function is, therefore, S(t) : e\HRA

(6.2.3)

and the hazard function, the ratio of (6.2.1) to (6.2.3), is h(t) : (t)A\

(6.2.4)

Figure 6.5 gives the Weibull density function with scale parameter : 1 and several different values of the shape parameter . For the survival curve, it is simple to plot the logarithm of S(t), log S(t) : 9(t)A

(6.2.5)

Figure 6.6 gives log S(t) for : 1 and : 1, 1, 1. When : 1 is a straight line with negative slope. When 1, negative aging, log S(t) decreases very slowly from 0 and then approaches a constant value. When 1, positive aging, log S(t) decreases sharply from 0 as t increases. Equation (6.2.5) can also

Figure 6.5 Density curves of Weibull distribution with : 1.

 

141

Figure 6.6 Curves of log S(t) of Weibull distribution with : 1. C

be written as log[9log S(t)] : log ; log t C C

(6.2.6)

The mean of the Weibull distribution is :

(1 ; 1/)

(6.2.7)

and the variance is

:

2 1 1 1 ; 9 1 ;

(6.2.8)

where () is the well-known gamma function deﬁned as () :

xA\e\V dx

: ( 9 1)!

when is a positive integer

(6.2.9)

Values of () can be found in Abramowitz and Stegun (1964). The coefﬁcient of variation is then CV :

(1 ; 2/) 91 (1 ; 1/)

(6.2.10)

The Weibull distribution can also be generalized to take into account a guarantee time G during which no deaths or failures can occur. The three-

-   

142

parameter Weibull probability density function is f (t) : A(t 9 G)A\ exp[9A(t 9 G)A]

(6.2.11)

S(t) : exp[9A(t 9 G)A]

(6.2.12)

h(t) : A(t 9 G)A\

(6.2.13)

Consequently,

and

Example 6.2 Pike (1966) applied the Weibull distribution to a two-group experiment on vaginal cancer in rats exposed to the carcinogen DMBA. The two groups were distinguished by pretreatment regime. The times in days, after the start of the experiment, at which the carcinoma was diagnosed for the two groups of rats were as follows: Group 1: 143, 164, 188, 188, 190, 192, 206, 209, 213, 216, 220, 227, 230, 234, 246, 265, 304, 216;, 244; Group 2: 142, 156, 173, 198, 205, 232, 232, 233, 233, 233, 233, 239, 240, 261, 280, 280, 296, 296, 323 204;, 344; Assuming that G : 100 and : 3, Pike obtained : (4.51;10\) for group 1 and : (2.38;10\) for group 2. Analytical estimation procedure is discussed in Chapter 7. Figure 6.7 plots the survival curves of the two groups. The step functions are nonparametric estimates similar to the Kaplan—Meier

Figure 6.7 Survival curves of rats exposed to carcinogen DMBA. (From Pike, 1966. Reproduced with permission of the Biometrics Society.)

 

143

Table 6.3 Calculation of Survivorship Functions for Group 2 of Rats Exposed to DMBA

Time

r

n9r;1

n9r n9r;1

142 156 163 198 204; 205 232 232 232 233 233 233 239 240 261 280 280 296 296 323 344;

1 2 3 4 — 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 —

21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

0.9524 0.9500 0.9474 0.9444 1.0000 0.9375 0.9333 0.9286 0.9231 0.9167 0.9091 0.9000 0.8888 0.8750 0.8571 0.8333 0.8000 0.7500 0.6667 0.5000 1.0000

Kaplan— Meier Estimates, S (t)

Modiﬁed Kaplan—Meier Estimates?, S (t) Plotted

S (t) Obtained from Weibull Fit

0.9524 0.9048 0.8572 0.8095 0.8095 0.7589 0.7083 0.6577 0.6071 0.5565 0.5059 0.4553 0.4047 0.3541 0.3035 0.2529 0.2023 0.1517 0.1011 0.0506 0.0506

0.9546 0.9091 0.8637 0.8182 0.8182 0.7700 0.7218 0.6737 0.6255 0.5773 0.5292 0.4810 0.4320 0.3847 0.3365 0.2883 0.2402 0.1920 0.1439 0.0958 0.0958

0.9825 0.9590 0.9421 0.7990 0.7647 0.7588 0.5778 0.5778 0.5706 0.5706 0.5706 0.5706 0.5271 0.5198 0.3697 0.2489 0.2489 0.1660 0.1660 0.0710 0.0313

? Instead of (n 9 r)/(n 9 r ; 1), Pike uses (n 9 r ; 1)/(n 9 r ; 2) in the Kaplan—Meier productlimit estimate to avoid (n 9 r)/(n 9 r ; 1) : 0. Source: Pike (1966). Reproduced with permission of the Biometric Society.

estimate. The smooth curves are obtained from the Weibull ﬁts. Table 6.3 shows the calculation of the plotting points for group 2. It is obvious that the Weibull distributions with G : 100, : 3, : (4.51;10\), and : (2.38;10\) ﬁt the carcinoma-free time of the two groups of rats very well.

6.3 LOGNORMAL DISTRIBUTION In its simplest form the lognormal distribution can be deﬁned as the distribution of a variable whose logarithm follows the normal distribution. Its origin may be traced as far back as 1879, when McAlister (1879) described explicitly a theory of the distribution. Most of its aspects have since been under study. Gaddum (1945a, b) gave a review of its application in biology, followed by

144

-   

Boag’s (1949) applications in cancer research. Its history, properties, estimation problems, and uses in economics have been discussed in detail by Aitchison and Brown (1957). Later, other investigators also observed that the age at onset of Alzheimer’s disease and the distribution of survival time of several diseases such as Hodgkin’s disease and chronic leukemia could be rather closely approximated by a lognormal distribution since they are markedly skewed to the right and the logarithms of survival times are approximately normally distributed. Consider the survival time T such that log T is normally distributed with mean and variance . We then say that T is lognormally distributed and write T as (, ). It should be noted that and are not the mean and variance of the lognormal distribution. Figure 6.8 gives the hazard function of the lognormal distribution with different values for the parameters. The hazard function increases initially to a maximum and then decreases (almost as soon as the median is passed) to zero as time approaches inﬁnity (Watson and Wells 1961). Therefore, the lognormal distribution is suitable for survival patterns with an initially increasing and then decreasing hazard rate. By a central limit theorem, it can be shown that the distribution of the product of n independent positive variates approaches a lognormal distribution under very general conditions: for example, the distribution of the size of an organism whose growth is subject to many small impulses, the effect of each of which is proportional to the momentary size of the organism. The popularity of the lognormal distribution is due in part to the fact that the cumulative values of y : log t can be obtained from the tables of the standard normal distribution and the corresponding values of t are then found by taking antilogs. Thus, the percentiles of the lognormal distribution are easy to ﬁnd.

Figure 6.8 Hazard of the lognormal distribution with different parameters.

 

145

The probability density function and survivorship function are, respectively, f (t) :

1 t (2

1 (log t 9 ) 2

exp 9

t 0, 2

(6.3.1)

and S(t) :

1 1 exp 9 (log x 9 ) dx x 2

(2 R 1

(6.3.2)

Let a : exp(9). Then 9 : log a, (6.3.1) and (6.3.2) can be written as f (t) :

1 t (2

exp 9

1 (log at) 2

(6.3.3)

and S(t) :

1 1 exp 9 (log ax) dx 2 x

(2 R 1

: 1 9 G log

at

(6.3.4)

(6.3.5)

where G(y) is the cumulative distribution function of a standard normal variable G(y) :

1

W

(2

e\S du

(6.3.6)

The lognormal distribution is speciﬁed completely by the two parameters and . Time T cannot assume zero values since log T is not deﬁned for T : 0. Figure 6.9 gives the lognormal frequency curves for : 0, : 0.1, 0.5, 2, from which an idea of the ﬂexibility of the distribution may be obtained. It is obvious that the distribution is positively skewed and that the greater the value of , the greater the skewness. Figure 6.10 shows the frequency curves for

: 0.5, : 0, 0.5, 1. It is obvious that and are, respectively, scale parameters and not location and scale parameters as in the normal distribution. The hazard function, from (6.3.3) and (6.3.5), has the form h(t) :

(1/t (2 ) exp[9 (log at)/2 ] 1 9 G(log at/ )

and is plotted in Figure 6.8.

(6.3.7)

146

-   

Figure 6.9 Lognormal density curves with : 0.

The mean and variance of the two-parameter lognormal distribution are, respectively, exp( ; ) and [exp( ) 9 1] exp(2 ; ). The coefﬁcient of variation of the distribution is then [exp( ) 9 1]. The median is eI and the mode is exp( ; ). The two-parameter lognormal distribution can also be generalized to a three-parameter distribution by replacing t with t 9 G in (6.3.1). In other words, the survival time log(T 9 G) follows the normal distribution with mean and variance . In certain situations the value of G may be determined a priori and should not be regarded as an unknown parameter that requires estimation. If this is so, the variable T 9 G may be considered in place of T and the distribution of T 9 G has all the properties of the two-parameter lognormal distribution. However, the estimation procedures developed for the two-parameter case are not directly applicable to the distribution of T 9 G.

Figure 6.10 Lognormal density curves with : 0.5.

 

147

Figure 6.11 Lognormal probability plot of the survival time of 234 male patients with chronic lymphocytic leukemia. (From Feinleib and MacMahon, 1960. Reproduced by permission of the publisher.)

Example 6.3 In a study of chronic lymphocytic and myelocytic leukemia, Feinleib and MacMahon (1960) applied the lognormal distribution to analyze survival data of 649 white residents of Brooklyn diagnosed from 1943 to 1952. The analysis of several subgroups of patients follows. The survival time of each patient is computed from the date of diagnosis in months. Analytical method is used to ﬁt the lognormal distribution to the data. The method is discussed in Chapters 7 and 8. Figure 6.11 gives the probability plot of the survival time of 234 male patients with chronic lymphocytic leukemia, in which the horizontal axis for the survival time is in logarithmic scale and the vertical axis is in normal probability scale. When plotting 1 9 S(t) on this graph paper, a straight line is obtained when the data follow a two-parameter lognormal distribution. An inspection of the graph shows that the distribution is concave. Gaddum (1945a, b) has pointed out that such a deviation can be corrected by subtracting an appropriate constant from the survival times. In other words, the threeparameter lognormal distribution can be used. Figure 6.12 gives a similar plot in which the survival time of every patient plus 4 is plotted. The conﬁguration is linear and hence empirically it seems valid to assume that the lognormal distribution is appropriate. Similar graphs for male patients with chronic myelocytic leukemia and for female patients with chronic lymphocytic or myelocytic leukemia are given in Figures 6.13 and 6.14. Parameters of the lognormal distribution are estimated. Feinleib and MacMahon report that the agreement between the observed and calculated distributions is striking for each group except for women with chronic lymphocytic leukemia. The corresponding p values for the chi-square

-   

148

Figure 6.12 Lognormal probability plot of the survival time in months plus 4 of 234 male patients with chronic lymphocytic leukemia. (From Feinleib and MacMahon, 1960. Reproduced by permission of the publisher.)

goodness-of-ﬁt test are as follows:

Chronic Myelocytic Chronic Lymphocytic Male Female

0.86 0.57

0.73 0.016

Since a large p value indicates close agreement, it is concluded that the three-parameter lognormal distribution adequately describes the distribution of survival times for each subgroup except women with chronic lymphocytic leukemia. The shape of the observed distribution for the latter group suggests that it might actually be composed of two dissimilar groups, each of whose survival times might ﬁt a lognormal distribution.

6.4 GAMMA AND GENERALIZED GAMMA DISTRIBUTIONS The gamma distribution, which includes the exponential and chi-square distribution, was used a long time ago by Brown and Flood (1947) to describe the life of glass tumblers circulating in a cafeteria and by Birnbaum and Saunders (1958) as a statistical model for life length of materials. Since then, this distribution has been used frequently as a model for industrial reliability problems and human survival.

    

149

Figure 6.13 Lognormal probability plot of the survival time in months plus 4 of 162 male patients with chronic myelocytic leukemia. (From Feinleib and MacMahon, 1960. Reproduced by permission of the publisher.)

Suppose that failure or death takes place in n stages or as soon as n subfailures have happened. At the end of the ﬁrst stage, after time T , the ﬁrst subfailure occurs; after that the second stage begins and the second subfailure occurs after time T ; and so on. Total failure or death occurs at the end of the nth stage, when the nth subfailure happens. The survival time, T, is then T ; T ; % ; T . The times T , T , . . . , T spent in each stage are assumed to L L

Figure 6.14 Lognormal probability plot of the survival time in months plus 4 of female patients with two types of leukemia. (From Feinleib and MacMahon, 1960. Reproduced by permission of the publisher.)

-   

150

be independently exponentially distributed with probability density function exp(9t ), i : 1, . . . , n. That is, the subfailures occur independently at a G constant rate . The distribution of T is then called the Erlangian distribution. There is no need for the stages to have physical signiﬁcance since we can always assume that death occurs in the n-stage process just described. This idea, introduced by A. K. Erlang in his study of congestion in telephone systems, has been used widely in queuing theory and life processes. A natural generalization of the Erlangian distribution is to replace the parameter n restricted to the integers 1, 2, . . . by a parameter taking any real positive value. We then obtain the gamma distribution. The gamma distribution is characterized by two parameters, and . When 0 1, there is negative aging and the hazard rate decreases monotonically from inﬁnity to as time increases from 0 to inﬁnity. When 1, there is positive aging and the hazard rate increases monotonically from 0 to as time increases from 0 to inﬁnity. When : 1, the hazard rate equals , a constant, as in the exponential case. Figure 6.15 illustrates the gamma hazard function for : 1 and 1, : 1, 2, 4. Thus, the gamma distribution describes a different type of survival pattern where the hazard rate is decreasing or increasing to a constant value as time approaches inﬁnity. The probability density function of a gamma distribution is f (t) :

(t)A\e\HR ()

t 0, 0,

0

(6.4.1)

where () is deﬁned as in (6.2.9). Figures 6.16 and 6.17 show the gamma density function with various values of and . It is seen that varying changes the shape of the distribution while varying changes only the scaling. Consequently, and are shape and scale parameters, respectively. When 1, there is a single peak at t : ( 9 1)/.

Figure 6.15 Gamma hazard functions with : 1.

    

151

Figure 6.16 Gamma density functions with : 1.

The cumulative distribution function F(t) has a more complex form: F(t) :

R

(x)A\e\HV dx ()

1 : ()

HR

(6.4.2)

uA\e\S du

: I(t, )

(6.4.3)

where I(s, ) :

1 ()

Q

uA\e\S du

(6.4.4)

known as the incomplete gamma function, is tabulated in Pearson (1922, 1957).

Figure 6.17 Gamma density functions with : 3.

-   

152

For the Erlangian distribution, it can be shown that L\ e\HR(t)I F(t) : 1 9 k! I

(6.4.5)

Thus, the survivorship function 1 9 F(t) is S(t) :

(x)A\e\HV dx () R

(6.4.6)

for the gamma distribution or L\ (t)I S(t) : e\R k! I

(6.4.7)

for the Erlangian distribution. Since the hazard function is the ratio of f (t) to S(t), it can be calculated from (6.4.1) and (6.4.7). When is an integer n, h(t) :

(t)L\ (n 9 1)! L\ (1/k!)(t)I I

(6.4.8)

When : 1, the distribution is exponential. When : and : , where is an integer, the distribution is chi-square with degrees of freedom. The mean and variance of the standard gamma distribution are, respectively, / and /, so that the coefﬁcient of variation is 1/(. Many survival distributions can be represented, at least roughly, by suitable choice of the parameters and . In many cases, there is an advantage in using the Erlangian distribution, that is, in taking integer. The exponential, Weibull, lognormal, and gamma distributions are special cases of a generalized gamma distribution with three parameters, , , and , whose density function is deﬁned as f (t) :

?A t?A\ exp [9(t)?] ()

t 0, 0,

0,

0

(6.4.9)

It is easily seen that this generalized gamma distribution is the exponential distribution if : : 1, the Weibull distribution if : 1; the lognormal distribution if ; -, and the gamma distribution if : 1. In later chapters (e.g., Chapters 7 and 9), we discuss several parametric procedures for estimation and hypothesis testing. To use available computer software such as SAS to carry out the computation, we use the distributions adopted by the software. One of the very few software packages that include the gamma or generalized gamma distribution is SAS. In SAS, the generalized

    

153

Table 6.4 Lifetimes of 101 Strips of Aluminum Coupon 370 706 716 746 785 797 844 855 858 886 886 930 960 988 990 1000 1010 1016 1018 1020 1055

1085 1102 1102 1108 1115 1120 1134 1140 1199 1200 1200 1203 1222 1235 1238 1252 1258 1262 1269 1270 1290

1293 1300 1310 1313 1315 1330 1355 1390 1416 1419 1420 1420 1450 1452 1475 1478 1481 1485 1502 1505 1513

1522 1522 1530 1540 1560 1567 1578 1594 1602 1604 1608 1630 1642 1674 1730 1750 1750 1763 1768 1781 1782

1792 1820 1868 1881 1890 1893 1895 1910 1923 1940 1945 2023 2100 2130 2215 2268 2440

Source: Birnbaum and Saunders (1958).

gamma distribution is deﬁned as having the following density function: f (t) :

A?A t?A\ exp [9(t)?], ()

t 0,

0,

0

(6.4.10)

To differentiate this form of the generalized gamma distribution from the generalized gamma in (6.4.9), we refer to this distribution as the extended generalized gamma distribution. It can be shown that the extended generalized gamma distribution reduces to the Weibull distribution when 0 and : 1, the lognormal distribution when ; -, the gamma distribution when : 1, and the exponential distribution when : : 1. Example 6.4 Birnbaum and Saunders (1958) report an application of the gamma distribution to the lifetime of aluminum coupon. In their study, 17 sets of six strips were placed in a specially designed machine. Periodic loading was applied to the strips with a frequency of 18 hertz and a maximum stress of 21,000 pounds per square inch. The 102 strips were run until all of them failed. One of the 102 strips tested had to be discarded for an extraneous reason, yielding 101 observations. The lifetime data are given in Table 6.4 in ascending order. From the data the two parameters of the gamma distribution were

154

-   

Figure 6.18 Graphical comparison of observed and ﬁtted cumulative distribution functions of data in Example 6.4. (From Birnbaum and Saunders, 1958.)

estimated (estimation methods are discussed in Chapter 7). They obtained : 11.8 and : 1/(118.76;10). A graphical comparison of the observed and ﬁtted cumulative distribution function is given in Figure 6.18, which shows very good agreement. A chi-square goodness-of-ﬁt test (discussed in Chapter 9) yielded a value of 4.49 for 6 degrees of freedom, corresponding to a signiﬁcance level between 0.5 and 0.6. Thus, it was concluded that the gamma distribution was an adequate model for the life length of some materials.

6.5 LOG-LOGISTIC DISTRIBUTION The survival time T has a log-logistic distribution if log(T ) has a logistic distribution. The density, survivorship, hazard, and cumulative hazard functions of the log-logistic distribution are, respectively,

f (t) :

tA\ (1 ; tA)

(6.5.1)

S(t) :

1 1 ; tA

(6.5.2)

   h(t) :

155 tA\ 1 ; tA

H(t) : log(1 ; tA)

(6.5.3) (6.5.4)

t 0, 0, 0 The log-logistic distribution is characterized by two parameters , and . The median of the log-logistic distribution is \A. Figure 6.19(a) to (c) show the log-logistic hazard, density, and survivorship functions with : 1 and various values of : 2.0, 1, and 0.67. When 1, the log-logistic hazard has the value 0 at time 0, increases to a peak at t : ( 9 1)A/A, and then declines, which is similar to the lognormal hazard. When : 1, the hazard starts at A and then declines monotonically. When 1, the hazard starts at inﬁnity and then declines, which is similar to the Weibull distribution. The hazard function declines toward 0 as t approaches inﬁnity. Thus, the log-logistic distribution may be used to describe a ﬁrst increasing and then decreasing hazard or a monotonically decreasing hazard. Example 6.5 Byers et al. (1988) used the log-logistic distribution to describe the rate of spread of HIV between 1978 and 1986. Between 1978 and 1980, over 6700 homosexual and bisexual men in San Francisco were enrolled in studies of the prevalence and incidence of sexually transmitted hepatitis B virus (HBV) infections. Blood specimens were collected from the participants. Four hundred and eighty-eight men who were HBV-seronegative were randomly selected to participate in a study of HIV infection later. These men agreed to allow the investigators to test the specimens collected previously together with a current specimen. For those who convert to positive, the infection time is only known to have occurred between the previous negative test and the time of the ﬁrst positive one. The exact time is unknown. The time to infection is therefore interval censored. The investigators tried to ﬁt several distributions to the interval-censored data, including the Weibull and loglogistic by maximum likelihood methods (discussed in Chapter 7). Based on the Akaike information criterion (discussed in Chapter 9), the log-logistic distribution was found to provide the best ﬁt to the data. The maximum likelihood estimates of the two parameters are : 0.003757 and : 1.424328. Based on the log-logistic model, the median infection time is estimated to be 50.4 months, and the hazard function approaches its peak at 27.6 months.

6.6 OTHER SURVIVAL DISTRIBUTIONS Many other distributions can be used as models of survival time, three of which we discuss brieﬂy in this section: the linear exponential, the Gompertz (1825),

(a)

(b)

(c) Figure 6.19 (a) Hazard function of the log-logistic distribution; (b) density function of the log-logistic distribution; (c) Survivorship function of the log-logistic distribution.

156

  

157

and a distribution whose hazard rate is a step function. The linear-exponential model and the Gompertz distribution are extensions of the exponential distribution. Both describe survival patterns that have a constant initial hazard rate. The hazard rate varies as a linear function of time or age in the linear-exponential model and as an exponential function of time or age in the Gompertz distribution. In demonstrating the use of the linear-exponential model, Broadbent (1958), uses as an example the service of milk bottles that are ﬁlled in a dairy, circulated to customers, and returned empty to the dairy. The model was also used by Carbone et al. (1967) to describe the survival pattern of patients with plasmacytic myeloma. The hazard function of the linear-exponential distribution is h(t) : ; t

(6.6.1)

where and can be values such that h(t) is nonnegative. The hazard rate increases from with time if 0, decreases if 0, and remains constant (an exponential case) if : 0, as depicted in Figure 6.20. The probability density function and the survivorship function are, respectively, f (t) : ( ; t) exp[9(t ; t)]

(6.6.2)

S(t) : exp[9(t ; t)]

(6.6.3)

and

The mean of the linear-exponential distribution is 9(/) ; (/2)\L (/2), where L (x) : eV

y e\W dy

V

Figure 6.20 Hazard function of linear-exponential model.

-   

158

Table 6.5 Values of L(x) and G(x) x

L (x)

G(x)

0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 2 3

0.886 0.951 1.012 1.067 1.119 1.168 1.214 1.258 1.300 1.341 1.381 1.712 1.987

2.015 1.493 1.223 1.048 0.923 0.828 0.753 0.691 0.640 0.596 0.361 0.262

Source: Broadbent (1958).

is tabulated in Table 6.5. A special case of the linear-exponential distribution, the Rayleigh distribution, is obtained by replacing by (Kodlin, 1967). That is, the hazard function of the Rayleigh distribution is h(t) : ; t. The Gompertz distribution is also characterized by two parameters, and . The hazard function, h(t) : exp( ; t)

(6.6.4)

is plotted in Figure 6.21. When 0, there is positive aging starting from eH; when 0, there is negative aging; and when : 0, h(t) reduces to a constant, eH. The survivorship function of the Gompertz distribution is

S(t) : exp 9

eH (eAR 9 1)

Figure 6.21 Gompertz hazard function.

(6.6.5)

  

159

and the probability density function, from (6.6.4) and (2.2.5), is then

1 f (t) : exp ( ; t) 9 (eH>AR 9 eH)

(6.6.6)

The mean of the Gompertz distribution is G(eH/)/eH, where G(x) : eV

y\e\W dy

V

is tabulated in Table 6.5. Finally, we consider a distribution where the hazard rate is a step function:

a a h(t) : a I\ a I

0tt

t tt

(6.6.7)

t tt I\ I\ tt I\

where t , t , . . . , t are different time points. Figure 6.22 shows a typical hazard I function of this nature for k : 5. Using (2.2.4), the survivorship function can be derived:

exp(9a t) exp[9a t 9 a (t 9 t )] S(t) : exp[9a t 9 a (t 9 t ) 9 % 9 a (t 9 t ) I I\

Figure 6.22 Step hazard function.

0tt

t tt tt

I\

(6.6.8)

-   

160

The probability density function f (t) can then be obtained from (6.6.7) and (6.6.8) using (2.2.5):

a exp(9a t) a exp[9a t 9 a (t 9 t )] f (t) : a exp[9a t 9 a (t 9 t ) 9 % 9 a (t 9 t ) I I I\

0tt t tt

(6.6.9)

tt I\

One application of this distribution is the life-table analysis discussed in Chapter 4. In a life-table analysis, time is divided into intervals and the hazard rate is assumed to be constant in each interval. However, the overall hazard rate is not necessarily constant. The nine distributions described above are, among others, reasonable models for survival time distribution. All have been designed by considering a biological failure, a death process, or an aging property. They may or may not be appropriate for many practical situations, but the objective here is to illustrate the various possible techniques, assumptions, and arguments that can be used to choose the most appropriate model. If none of these distributions ﬁts the data, investigators might have to derive an original model to suit the particular data, perhaps by using some of the ideas presented here. Bibliographical Remarks In addition to the papers on the distributions cited in this chapter, Mann et al. (1974), Hahn and Shapiro (1967), Johnson and Kotz (1970a, b), ElandtJohnson and Johnson (1980), Lawless (1982), Nelson (1982), Cox and Oakes (1984), Gertsbakh (1989), and Klein and Moeschberger (1997) also discuss statistical failure models, including the exponential, Weibull, gamma, lognormal, generalized gamma, and log-logistic distributions. Applications of survival distributions can be found easily in medical and epidemiological journals. The following are a few examples: Dharmalingam et al. (2000), Riffenburgh and Johnstone (2001), and Mafart et al. (2002).

EXERCISES 6.1 Summarize the distributions discussed in this chapter, answering the following questions. (a) What distributions describe constant hazard rates? Give the range of parameter values. (b) What distributions describe increasing hazard rates? If there are more than one, discuss the differences between them. (c) What distributions describe decreasing hazard rates? If there are more than one, discuss the differences between them.



161

6.2 Suppose that the survival distribution of a group of patients follows the exponential distribution with G : 0 (year), : 0.65. Plot the survivorship function and ﬁnd: (a) The mean survival time (b) The median survival time (c) The probability of surviving 1.5 years or more 6.3 Suppose that the survival distribution of a group of patients follows the exponential distribution with G : 5 (years) and : 0.25. Plot the survivorship function and ﬁnd: (a) The mean survival time (b) The median survival time (c) The probability of surviving 6 years or more 6.4 Consider the following two Weibull distributions as survival models: (i) G : 0, : 1, : 0.5 (ii) G : 0, : 0.5, : 2 For each distribution, plot the survivorship function and the hazard function and ﬁnd: (a) The mean (b) The variance (c) The coefﬁcient of variation Which distribution gives the larger probability of surviving at least 3 units of time? 6.5 Suppose that the survival time follows the lognormal distribution with : 1 and : 0.5. Find: (a) The mean survival time (b) The variance (c) The coefﬁcient of variation (d) The median (e) The mode 6.6 Suppose that pain relief time follows the gamma distribution with : 1, : 0.5. Find: (a) The mean (b) The variance (c) The coefﬁcient of variation 6.7 Suppose that the survival distribution is (1) Gompertz and (2) linearexponential, and : 1, : 2.0. Plot the hazard function and ﬁnd: (a) The mean (b) The probability of surviving longer than 1 unit of time 6.8 Consider the survival times of hypernephroma patients given in Exercise Table 3.1. From the plot you obtained in Exercise 4.5, suggest a distribution that might ﬁt the data.

Statistical Methods for Survival Data Analysis. Elisa T. Lee and John Wenyu Wang Copyright ¶ 2003 John Wiley & Sons, Inc. ISBN: 0-471-36999-7

CHAPTER 7

Estimation Procedures for Parametric Survival Distributions without Covariates

In this chapter we discuss some analytical procedures for estimating the most commonly used survival distributions discussed in Chapter 6. We introduce the maximum likelihood estimates (MLEs) of the parameters of these distributions. The general asymptotic likelihood inference results that are most widely used for these distributions are given in Section 7.1. We begin to used the general symbol b : (b , b , . . . , b ) to denote a set of parameters. For example, in N discussing the Weibull distribution, b could be and b could be , and p : 2. b is called a vector in linear algebra. Readers who are not familiar with linear algebra or are not interested in the mathematical details may skip this section and proceed to Section 7.2 without loss of continuity. In Sections 7.2 to 7.7 we introduce the MLEs for the parameters of the exponential, Weibull, lognormal, gamma, log-logistic, and Gompertz distributions for data with and without censored observations. The related BMDP or SAS programming codes that may be used to obtain the MLE are given in the respective sections.

7.1 GENERAL MAXIMUM LIKELIHOOD ESTIMATION PROCEDURE 7.1.1 Estimation Procedures for Data with Right-Censored Observations Suppose that persons were followed to death or censored in a study. Let t , t , . . . , t , t> , . . . , t> be the survival times observed from the n individuals, L P P> with r exact times and (n 9 r) right-censored times. Assume that the survival times follow a distribution with the density function f (t, b) and survivorship function S(t, b), where b : (b , . . . , b ) denotes unknown p parameters N b , . . . , b in the distribution. As shown in Chapter 6, an exponential distribu N tion has one (p : 1) parameter , the Weibull distribution has two (p : 2) 162

    

163

parameters and , and so on. If the survival time is discrete (i.e., it is observed at discrete time only), f (t, b) represents the probability of observing t and S(t, b) represents the probability that the survival or event time is greater than t. In other words, f (t, b) and S(t, b) represent the information that can be obtained from an observed uncensored survival time and an observed right-censored survival time, respectively. Therefore, the product L f (t , b) represents G G the joint probability of observing the uncensored survival times, and L S(t >, b) represents the joint probability of those right-censored survival GP> G times. The product of these two probabilities, denoted by L (b), P L L (b) : f (t , b) S(t >, b) G G G GP> represents the joint probability of observing t , t , . . . , t , t> , . . . , t>. A similar L P P> interpretation applies to continuous survival. L (b) is called the likelihood function of b, which can also be interpreted as a measure of the likelihood of observing a speciﬁc set of survival times t , t , . . . , t , t> , . . . , t>, given a L P P> speciﬁc set of parameters b. The method of the MLE is to ﬁnd an estimator of b that maximizes L (b), or in other words, which is ‘‘most likely’’ to have produced the observed data t , t , . . . , t , t> , . . . , t>. Take the logarithm of L P P> L (b) and denote it by l(b), P L l(b) : log L (b) : log[ f (t , b)] ; log[S(t >, b)] G G G GP>

(7.1.1)

Then the MLE b of b is the set of b , . . . , b that maximizes l(b): N l(b ) : max (l(b)). b It is clear that b is a solution of the following simultaneous equations, which are obtained by taking the derivative of l(b) with respect to each b : H l(b) :0 b H

j : 1, 2, . . . , p

(7.1.2)

The exact forms of (7.1.2) for the parametric survival distributions discussed in Chapter 6 are given in Sections 7.2 to 7.7. Often, there is no closed solution for the MLE b from (7.1.2). To obtain the MLE b , one can use a numerical method. A commonly used numerical method is the Newton—Raphson iterative procedure, which can be summarized as follows. 1. Let the initial values of b , . . . , b be zero; that is, let N b : 0

164

     

2. The changes for b at each subsequent step, denoted by H, is obtained by taking the second derivative of the log-likelihood function:

H : 9

l(bH\) \ l(bH\) b b b

(7.1.3)

3. Using H, the value of bH at j th step is bH : bH\ ; H

j : 1, 2, . . .

The iteration terminates at, say, the mth step if K , where is a given precision, usually a very small value, 10\ or 10\. Then the MLE b is deﬁned as b : bK\

(7.1.4)

The estimated covariance matrix of the MLE b is given by

V (b ) : Co v(b ) : 9

l(b ) \ b b

(7.1.5)

One of the good properties of a MLE is that if b is the MLE of b, then g(b ) is the MLE of g(b) if g(b) is a ﬁnite function and need not be one-to-one. The concept of the Newton—Raphson method for p : 1 is illustrated in detail in Appendix A. The estimated 100(1 9 )% conﬁdence interval for any parameter b is G (b 9 Z (v , b ; Z (v ) ? GG G ? GG G

(7.1.6)

where v is the ith diagonal element of V (b ) and Z is the 100(1 9 /2) ? GG percentile point of the standard normal distribution [P(Z Z ) : /2]. For ? a ﬁnite function g(b ) of b , the estimated 100(1 9 )% conﬁdence interval for G G g(b ) is its respective range R on the conﬁdence interval (7.1.6), that is, G R : g(b ) : b + (b 9 Z (v , b ; Z (v ) ? GG G ? GG G G G

(7.1.7)

In case g(b ) is monotone in b , the estimated 100(1 9 )% conﬁdence interval G G for g(b ) is G [g(b 9 Z (v ), g(b ; Z (v )] ? GG ? GG G G

(7.1.8)

    

165

7.1.2 Estimation Procedures for Data with Right-, Left-, and Interval-Censored Observations If the survival times t , t , . . . , t observed for the n persons consist of uncen L sored, left-, right-, and interval-censored observations, the estimation procedures are similar. Assume that the survival times follow a distribution with the density function f (t, b) and the survivorship function S(t, b), where b denotes all unknown parameters of the distribution. Then the log-likelihood function is l(b) : log L (b) : log[ f (t , b)] ; log[S(t , b)] G G ; log[1 9 S(t , b)] ; log[S(v , b) 9 S(t , b)] (7.1.9) G G G where the ﬁrst sum is over the uncensored observations, the second sum over the right-censored observations, the third sum over the left-censored observations, and the last sum over the interval-censored observations, with v as the G lower end of a censoring interval. The other steps for obtaining the MLE b of b are similar to the steps shown in Section 7.1.1 by substituting the loglikelihood function deﬁned in (7.1.1) with the log-likelihood function in (7.1.9). The computation of the MLE b and its estimated covariance matrix is tedious. The following example gives the general procedure for using SAS to carry out the computation. Example 7.1 If the survival time observed contains uncensored, right-, left-, and interval-censored observations, one needs to create a new data set from the observed data to use SAS to obtain the estimates of the parameters in the distribution. For an observed survival time t (uncensored, right-, or left-censored), we deﬁne two variables LB and UB as follows: If t is uncensored, take LB : UB : t; if t is left-censored, LB : . and UB : t; and if t is right-censored, then LB : t and UB:., where ‘‘.’’ means ‘‘missing’’ in SAS. If a survival time is interval-censored, [i.e., one observed two numbers t and t , t t and the survival time is in the interval (t , t )], let LB : t and UB : t . Assume that the new data set (in terms of LB and UB) has been saved in ‘‘C:EXAMPLEA.DAT’’ as a text ﬁle, which contains two columns (LB in the ﬁrst column and UB the second column) separated by a space. As an example, the following SAS code can be used to obtain the estimated covariance matrix deﬁned in (7.1.5) and the MLE of the parameters of the Weibull distribution for the survival data observed in the text ﬁle ‘‘C:EXAMPLEA.DAT’’. One can replace d : weibull in the following code with the respective distribution in Sections 7.2 to 7.6 (see the SAS code in these sections for details) to obtain the estimate. data w1; inﬁle ‘c:examplea.dat’ missover; input lb ub; run; proc lifereg; model (lb,ub):/covb d : weibull; run;

166

     

7.2 EXPONENTIAL DISTRIBUTION 7.2.1 One-Parameter Exponential Distribution The one-parameter exponential distribution has the following density function; f (t) : e\HR

(7.2.1)

S(t) : e\HR

(7.2.2)

h(t) :

(7.2.3)

survivorship function;

and hazard function;

where t 0, 0. Obviously, the exponential distribution is characterized by one parameter, . The estimation of by maximum likelihood methods for data without censored observations will be given ﬁrst followed by the case with censored observations. Estimation of for Data without Censored Observations Suppose that there are n persons in the study and everyone is followed to death or failure. Let t , t , . . . , t be the exact survival times of the n people. The L likelihood function, using (7.2.1) and (7.1.1), is L L : e\HRG G and the log-likelihood function is L l() : n log 9 t G G

(7.2.4)

From (7.1.2), the MLE of is :

n L t G G

(7.2.5)

Since the mean of the exponential distribution is 1/ and a MLE is invariant under an one-to-one transformation, the MLE of is 1 L t : : G G : t n

(7.2.6)

 

167

It can be shown 2n/ has an exact chi-square distribution with 2n degrees of freedom (Epstein and Sobel, 1953). Since : 1/ and : 1/, an exact 100(1 9 )% conﬁdence interval for is L\? L? 2n 2n

(7.2.7)

where is the 100 percentage point of the chi-square distribution with 2n L? degrees of freedom, that is, P( ) : (Table B-2). When n is large L L? (n 25, say), is approximately normally distributed with mean and variance /n. Thus, an approximate 100(1 9 )% conﬁdence interval for is 9

Z

Z ? ; ? (n (n

(7.2.8)

where Z is the 100 /2 percentage point, P(Z Z ) : /2, of the standard ? ? normal distribution (Table B-1). Since 2n/ has an exact chi-square distribution with 2n degrees of freedom, an exact 100(1 9 a)% conﬁdence interval for the mean survival time is 2n 2n L\? L?

(7.2.9)

The following example illustrates the procedures. Example 7.2 Consider the following remission times in weeks for 21 patients with acute leukemia: 1, 1, 2, 2, 3, 4, 4, 5, 5, 6, 8, 8, 9, 10, 10, 12, 14, 16, 20, 24, and 34. Assume that remission duration follows the exponential distribution. Let us estimate the parameter by using the formulas given above. According to (7.2.5), the MLE of the relapse rate, , is :

21 : 0.106 per week 198

The mean remission time is then 198/21 : 9.429 weeks. Using the analytical procedures given above, conﬁdence intervals for and can also be obtained. A 95% conﬁdence interval for the relapse rate , following (7.2.7), is approximately (0.106)(24.433) (0.106)(59.342) 42 42 or (0.062, 0.150). A 95% conﬁdence interval for the mean remission time,

168

     

following (7.2.9), is (42)(9.429) (42)(9.429) 59.342 24.433 or (6.673, 16.208). Once the parameter is estimated, other estimates can be obtained. For example, the probability of staying in remission for at least 20 weeks, estimated from (7.2.2), is S (20) : exp[90.106(20)] : 0.120. Any percentile of survival time t may be estimated by equating S(t) to p and solving for t , that is, N N t : 9log p/. For example, the median (50th percentile) survival time can be N estimated by t : 9log 0.5/ : 6.539 weeks. Estimation of for Data with Censored Observations We ﬁrst consider singly censored and then progressively censored data. Suppose that without loss of generality, the study or experiment begins at time 0 with a total of n subjects. Survival times are recorded and the data become available when the subjects die one after the other in such a way that the shortest survival time comes ﬁrst, the second shortest second, and so on. Suppose that the investigator has decided to terminate the study after r out of the n subjects have died and to sacriﬁce the remaining n 9 r subjects at that time. Then the survival times for the n subjects are t

t % t : t> : % : t> P> L P

where a superscript plus indicates a sacriﬁced subject, and thus t> is a censored G observation. In this case, n and r are ﬁxed values and all of the n 9 r censored observations are equal. The likelihood function, using (7.1.1), (7.2.1), and (7.2.2), is L:

n! P e\HRG(e\HRP)L\P (n 9 r)! G

and from (7.1.2), the MLE of is :

r P t ; L t> G G GP> G

(7.2.10)

The mean survival time : 1/ can then be estimated by 1 P t ; L t> GP> G : : G G r

(7.2.11)

It is shown by Halperin (1952) that 2r/ has a chi-square distribution with 2r

 

169

degrees of freedom. The mean and variance of are r/(r 9 1) and /(r 9 1), respectively. The 100(1 9 )% conﬁdence interval for is P\? P? 2r 2r

(7.2.12)

When n is large, the distribution of is approximately normal with mean and variance /(r 9 1). An approximate 100/(1 9 )% conﬁdence interval for is then 9

Z Z ? ; ? (r 9 1 (r 9 1

(7.2.13)

Epstein and Sobel (1953) show that 2r/ has a chi-square distribution with 2r degrees of freedom. Thus a 100/(1 9 )% conﬁdence interval for (see also Epstein, 1960b) is 2r 2r P\? P?

(7.2.14)

They also develop test procedures for the hypothesis H : : against the alternative H : . One of their rules of action is to accept H if c and reject H if c, where c : ( )/2r and is the signiﬁcance level. Or if the P? estimated mean survival time calculated from (7.2.11) is greater then c, the hypothesis H is rejected at the level. The following example illustrates the procedure. Example 7.3 Suppose that in a laboratory experiment 10 mice are exposed to carcinogens. The experimenter decides to terminate the study after half of the mice are dead and to sacriﬁce the other half at that time. The survival times of the ﬁve dead mice are 4, 5, 8, 9, and 10 weeks. The survival data of the 10 mice are 4, 5, 8, 9, 10, 10;, 10;, 10;, 10;, and 10;. Assuming that the failure of these mice follows an exponential distribution, the survival rate and mean survival time are estimated, respectively, according to (7.2.10) and (7.2.11) by :

5 : 0.058 per week 36 ; 50

and : 1/0.058 : 17.241 weeks. A 95% conﬁdence interval for by (7.2.12) is (0.058)(3.247) (0.058)(20.483) (2)(5) (2)(5)

170

     

or (0.019, 0.119). A 95% conﬁdence interval for following (7.2.13) is 2(5)(17.241) 2(5)(17.241) 20.483 3.247 or (8.417, 53.098). The probability of surviving a given time for the mice can be estimated from (7.2.2). For example, the probability that a mouse exposed to the same carcinogen will survive longer than 8 weeks is S (8) : exp[90.058(8)] : 0.629 The probability of dying in 8 weeks is then 1 9 0.629 : 0.371. A slightly different situation may arise in laboratory experiments. Instead of terminating the study after the rth death, the experimenter may stop after a period of time T, which may be six months or a year. If we denote the number of deaths between 0 and T as r, the survival data may look as follows: t t % t t> : % : t> : T P> L P Mathematical derivations of the MLE of and are exactly the same and (7.2.10) can still be used. The sampling distribution of for singly censored data is also discussed by Bartholomew (1963). Progressively censored data come more frequently from clinical studies where patients are entered at different times and the study lasts a predetermined period of time. Suppose that the study begins at time 0 and terminates at time T and there are a total of n people entered. Let r be the number of patients who die before or at time T and n 9 r the number of patients who are lost to follow-up during the study period or remain alive at time T. The data look as follows: t , t , . . . , t , t> , t> , . . . , t>. Ordering the r uncensored L P P> P> observations according to their magnitude, we have t

t

% t , t> , t> , . . . , t> L P P> P>

The likelihood function, using (7.1.1), (7.2.1), and (7.2.2), is L P L : e\HRG e\HR>G GP> G and the log-likelihood function is P L l() : n 9 t 9 t> G G G GP>

(7.2.15)

 

171

and from (7.1.2), the MLE of the parameter is r : P t ; L t> G G GP> G

(7.2.16)

Consequently, 1 P t ; L t> GP> G : : G G r

(7.2.17)

is the MLE of the mean survival time. The sum of all of the observations, censored and uncensored, divided by the number of uncensored observations, gives the MLE of the mean survival time. To overcome the mathematical difﬁculties arising when all of the observations are censored (r : 0), Bartholomew (1957) deﬁnes L : t> G G

(7.2.18)

In practice, this estimate has little value. Distributions of the estimators are discussed by Bartholomew (1957). The distribution of for large n is approximately normal with mean and variance: Var() :

L (1 9 e\H2G) G

(7.2.19)

where T is the time that the ith person is under observation. In other words, G T is computed from the time the ith person enters the study to the end of the G study. If the observation times T are not known, the following quick estimate G of Var() can be used: () : Var

r

(7.2.20)

Thus an approximate 100(1 9 )% conﬁdence interval for is, by (7.1.6), () ; Z (Var () 9 Z (Var ? ?

(7.2.21)

The distribution of is approximately normal with mean and variance: Var() :

L G

(1 9 e\H2G )

(7.2.22)

172

     

Again, a quick estimate is () : Var

r

(7.2.23)

An approximate 100(1 9 )% conﬁdence interval for is then, by (7.1.6), () ; Z (Var () 9 Z (Var ? ?

(7.2.24)

The exact distribution of derived by Bartholomew (1963) is too cumbersome for general use and thus is not included here. Example 7.4 Consider the remission duration of the 21 leukemia patients receiving 6-MP in Example 3.3. The remission times in weeks were 6, 6, 6, 7, 10, 13, 16, 22, 23, 6;, 9;, 10;, 11;, 17;, 19;, 20;, 25;, 32;, 32;, 34;, and 35;. The hazard plot given in Figure 3.6 shows that the exponential distribution ﬁts the data very well. Maximum likelihood estimates of the relapse rate and the mean remission time can be obtained, respectively, from (7.2.16) and (7.2.17): :

9 : 0.025 per week 109 ; 250

:

1 : 40 weeks 0.025

The graphical estimate of obtained in Example 3.3 is 0.027, which is very close to the MLE. Thus, the remission duration of leukemia patients receiving 6-MP can be described by an exponential distribution with a constant weekly relapse rate of 2.5% and a mean remission time of 40 weeks. The probability of staying in remission for one year (or 52 weeks) or more is estimated by S (52) : exp[90.025(52)] : 0.273 Using (7.2.20) and (7.2.23) for the variance of and , the 95% conﬁdence intervals for and are, respectively, (0.009, 0.041) and (13.867, 66.133). Example 7.5 The results in Examples 7.2 to 7.4 can also be obtained by using available statistical software. Let t denote the observed survival time (exact or censored) and CENS be an index (or dummy) variable with CENS : 0 if t is censored and 1 otherwise. Assume that the data have been saved in ‘‘C:EXAMPLE.DAT’’ as a text ﬁle, which contains two columns (t in the ﬁrst column and CENS in second column for the same study subject), separated by a space. The following SAS code for procedure LIFEREG can be used to obtain the estimated covariance matrix deﬁned in (7.1.5) and the MLE of the parameter of the exponential distribution for the observed survival data in ‘‘C:EXAMPLE.DAT’’.

 

173

data w1; inﬁle ‘c:example.dat’ missover; input t cens; run; proc lifereg; model t*cens(0) : /covb d : exponential; run;

The respective BMDP code for program 2L is /input

/print /variable /form

/regress /end

ﬁle : ‘c:example.dat’ . variables : 2. format : free. level : brief. cova. survival. names : t, cens. time : t. status : cens. response : 1. accel : exponential.

If SAS is used, the estimated parameter of the exponential distribution can be obtained by : exp(9INTERCEPT), where INTERCEPT is the name of output estimated parameter in SAS procedure LIFEREG. In BMDP 2L, : exp(9CONSTANT) where CONSTANT is given by the program. 7.2.2 Two-Parameter Exponential Distribution In the case where a two-parameter exponential distribution is more appropriate for the data (Zelen, 1966), the density and survivorship functions are deﬁned, respectively, as f (t) :

S(t) :

and

e\HR\% 0 e\HR\% 1

t G 0, 0 tG t G 0, 0 tG

(7.2.25)

(7.2.26)

where G is called the guarantee time, the minimum survival time before which no deaths occur.

174

     

Estimation of and G for Data without Censored Observations If t , t , . . . , t are the survival times of the n patients, using (7.1.1), (7.1.2), L (7.2.25), and (7.2.26), the MLE of is :

n L (t 9 G ) G G

(7.2.27)

where G is an estimate of G that is the smallest observation in the data, G : min(t , t , . . . , t ) L

(7.2.28)

and the mean survival time is estimated by : G ; 1/. Example 7.6 Consider the survival times in months of 11 patients following initial pulmonary metastasis from ostenogenic sarcoma considered by Burdette and Gehan (1970). The data were 11, 13, 13, 13, 13, 13, 14, 14, 15, 15, and 17. Suppose that the two-parameter exponential distribution is selected. The guarantee time G is estimated by the smallest observation (i.e., G : 11), and the hazard rate estimated by (7.2.27) is :

11 : 0.367 (11 9 11) ; (13 9 11) ; % ; (17 9 11)

Thus, the exponential model tells us that the minimum survival time is 11 months, and after that the chance of death per month is 0.367. Similarly, the probability of surviving a given amount of time can then be estimated from (7.2.26). For example, the estimated probability of surviving 18 months or longer is S (18) : exp[90.367(18 9 11)] : 0.077 Estimation of and G for Data with Censored Observations We ﬁrst consider singly censored data. Suppose that an experiment begins with n animals and terminates as soon as the ﬁrst r deaths occur. For this case, we introduce the estimation procedures derived by Epstein (1960a). Let the ﬁrst r survival times be t t % t and let T * be the total P survival observed between the ﬁrst and the rth death: T * : (n 9 1)(t

9 t ) ; (n 9 2)(t 9 t ) ; % ; (n 9 r ; 1)(t 9 t ) P P\ : 9(n 9 1)t ; t ; t ; % ; t ; (n 9 r ; 1)t P\ P P : t 9 nt ; (n 9 r)t (7.2.29) G P G

 

175

The best estimates for G and in the sense that they are unbiased and have minimum variance are given by G : t

9

n

(7.2.30)

and :

T* r91

(7.2.31)

Then can then be estimated by : 1/. Conﬁdence intervals for the mean survival time are easy to obtain from the fact that 2(r 9 1) / : 2T */ has a chi-square distribution with 2(r 9 1) degrees of freedom. Thus, for r 1, the 100(1 9 )% conﬁdence interval for is 2(r 9 1) 2(r 9 1) P\\? P\?

(7.2.32)

or 2T * P\?

2T * P\\?

(7.2.33)

To ﬁnd conﬁdence intervals for G, we use the fact that x : 2n(t 9 G)/ and x : 2(r 9 1) / are independent and have a chi-square distribution with 2 and 2(r 9 1) degrees of freedom, respectively. Thus the ratio Y:

x /2 n(t 9 G) n(r 9 1)(t 9 G) : : T* x /2(r 9 1)

(7.2.34)

follows the F-distribution with 2 and 2(r 9 1) degrees of freedom. Let F be the 100 percentage point of the F distribution [i.e., P\? P\ P(Y F ) : ] (Table B-3 in Appendix B), and then a 100(1 9 )% P\? conﬁdence interval for G is Gt 9 F n P\?

(7.2.35)

T* t 9 F Gt n(r 9 1) P\?

(7.2.36)

t

or

Epstein and Sobel (1953) show that this interval is the shortest in the class of intervals being used. If for some particular values of r and the value F P\? is not tabulated in the F-table, Epstein (1960a) suggests using the following

176

     

conﬁdence intervals for G: (r 9 1) g Gt \? n

(7.2.37)

T* t 9 g Gt n \?

(7.2.38)

t 9 or

where

1 P\ 91 g : \?

(7.2.39)

is computable for any and r. Example 7.7 illustrates the procedures. Example 7.7 In a laboratory experiment 20 mice are injected with a tumor inoculum. These tumor cells multiply and eventually kill the animal. Suppose that the investigator decides to terminate the experiment after 10 deaths. The ﬁrst occurs 30 days after the experiment starts. The total survival observed between the time when the ﬁrst and tenth deaths occur is 600 animal days. Assuming that the survival distribution of these mice is exponential, the shortest 95% conﬁdence interval for G can be obtained by (7.2.36). Since F : 3.555, the interval is 600 30 9 (3.555) G 30 (20)(9) or (18.150, 30). The mean survival time estimated by (7.2.31) is : 66.667 days, and the 95% conﬁdence interval for computed from (7.2.33) is 2(600) 2(600) 31.526 8.231 or (38.064, 145.790). When data are progressively censored, Gehan (1970) derives an estimate for G and a modiﬁed MLE for the hazard rate . Suppose that r out of the n individuals in the study die before the end of the study and n 9 r individuals are alive at the time of the last follow-up or termination. The n survival times are denoted by t % t , t> , . . . , t> L P P> An estimate of G obtained by t

1 G : max t 9 , 0 n

(7.2.40)

 

177

and the variance of G is Var(G ) :

1 1 1; (n) r91

(7.2.41)

When n is large, G and Var(G ) can be estimated by G < t

(7.2.42)

and (G ) < Var

1 (n )

(7.2.43)

A modiﬁed MLE for is :

r91 P t ; L t> 9 nt G G GP> G

(7.2.44)

with variance Var() :

r91

(7.2.45)

Any percentile of survival time t may be estimated by equating S(t) to p and N solving for t ; that is, t : 9(log p)/ ; G . N N C The following example illustrates the procedures. Example 7.8 Suppose that 19 patients with brain tumor are followed in a clinical trial for a year. Their survival times in weeks are 3, 4, 6, 8, 8, 10, 12, 16, 17, 30, 33, 3;, 8;, 13;, 21;, 26;, 35;, 44;, and 45;. In this case n : 19, r : 11, t : 3, t : 147, and t> : 195. The hazard rate per week G G G G and its variance may be estimated by (7.2.44) and (7.2.45) as :

10 : 0.035 147 ; 195 9 19(3)

and () : Var

(0.035) : 0.0001 10

The guarantee time G and its variance may then be estimated by (7.2.40) and (7.2.41):

178

     

G : max 3 9

1 , 0 : 1.496 19;0.035

and (G ) : Var

1 (19;0.035)

1;

1 : 2.487 10

Thus, after a guarantee time of approximately 1.5 weeks, the chance of death per week is 0.035. The estimated median survival time is t

:9

log 0.5 ; 1.496 : 21.3 weeks 0.035

The probability of surviving at least six months (or 26 weeks) is estimated by S (26) : exp[90.35(26 9 1.496)] : 0.424

7.3 WEIBULL DISTRIBUTION The Weibull distribution has the density and survivorship functions f (t) : AtA\ exp[9(t)A] S(t) : e\HRA

t 0, 0, 0

(7.3.1)

The MLE of the parameters and involves equations to be solved simultaneously. Numerical methods such as the Newton—Raphson iterative procedure (7.1.13) can be applied. We begin with the case where no censored observations are presented. Let t , t , . . . , t be the exact survival times of n individuals under investiga L tion. If their survival times follow the Weibull distribution, the log-likelihood function is L l(, ) : n log ; n log ; [( 9 1) log t 9 AtA] G G G

(7.3.2)

The MLE of and in (7.3.1) can be obtained by solving the following two equations simultaneously: L n 9 t : 0 G G

L n L ; n log ; log t 9 t (log ; log t ) : 0 G G G G G

(7.3.3) (7.3.4)

 

179

Next, let us consider a typical laboratory experiment in which subjects are entered at the same time and the experiment is terminated after r of the n subjects have failed (or after a ﬁxed period of time T ). In both of these cases the data collected are singly censored. The ordered survival data are t

t % t : t> : % : t> P> L P

If the time to failure follows the Weibull distribution with the density function given in (7.3.1), the MLE of and may be obtained by solving the following two equations simultaneously: r 9

(7.3.5)

(7.3.6)

P t ; (n 9 r)t : 0 G P G

r P ; r log ; log t G G P ; t (log ; log t ) ; (n 9 r)t (log ; log t ) : 0 G P P G G

When data are progressively censored, we have t

t % t , t> , . . . , t> L P P>

If the survival distribution is Weibull deﬁned by (7.3.1), the log-likelihood function is P L l(, ) : r log ; r log ; [( 9 1)log t 9 AtA ] 9 At>A G G G G GP> (7.3.7) The MLE of and may be obtained by solving the following two equations simultaneously: r 9 A

P L t ; t> : 0 G G G GP>

r P P ; r log ; log t 9 t (log ; log t ) G G G G G L 9 t ;(log ; log t>) : 0 G G GP>

(7.3.8)

(7.3.9)

The following example illustrates the use of available computer software to obtain the MLE of and .

180

     

Example 7.9 Referring to Example 7.5, for the observed survival data in the ﬁle ‘‘EXAMPLE.DAT’’, we can use either SAS or BMDP to obtain the estimated parameters of the Weibull distribution. The codes given in Example 7.5 can be used except that d : exponential in the SAS code must be changed to d : weibull and accel : exponential in BMDP code be changed to accel : weibull. If SAS is used, the estimated parameters of the Weibull distribution are : exp(9INTERCEPT) and :

1 SCALE

where INTERCEPT and SCALE are produced by SAS procedure LIFEREG. If BMDP is used, : exp(9INTERCEPT) and :

1 SCALE

where CONSTANT and SCALE are given by procedure 2L. 7.4 LOGNORMAL DISTRIBUTION If the survival time T follows the lognormal distribution with density function f (t) :

1 t(2

exp 9

1 (log t 9 ) 2

(7.4.1)

the mean and the variance are exp( ; ) and [exp() 9 1] exp(2 ; ), respectively. Estimation of the two parameters and has been investigated either by using (7.4.1) directly or by using the fact that Y : log T follows the normal distribution with mean and variance . In the following, we discuss the estimation of and for samples with and without censored observations. 7.4.1 Estimation of and 2 for Data without Censored Observations Estimations of and for complete samples by maximum likelihood methods have been studied by many authors: for example, Cohen (1951) and Harter and Moore (1966). But the simplest way to obtain estimates of and with optimum properties is by considering the distribution of Y : log T. Let t , t , . . . , t be the survival times of n subjects. The MLE of is the sample mean L of Y given by :

1 L log t G n G

(7.4.2)

The MLE of is :

1 n

L ( L log t ) G (log t ) 9 G G n G

(7.4.3)

 

181

The estimate is also unbiased but is not. The best unbiased estimates of and are and the sample variance s : [n/(n 9 1)]. If n is moderately large, the difference between s and is negligible. One of the properties of the MLE is that if is the MLE of , g( ) is the MLE of g( ) if g( ) is a ﬁnite function. Therefore, the MLEs of the mean and variance of T are, respectively, exp( ; ) and exp[( 9 1)] exp(2 ; ). It is known that : y is normally distributed with mean and variance /n. Hence, if is known, a 100(1 9 )% conﬁdence interval for is < Z /(n. If is unknown, we can use Student’s t-distribution. A ? 100(1 9 )% conﬁdence interval for is < t s/(n 9 1, where t ?L\ ?L\ is the 100 /2 percentage point of Student’s t-distribution with n 9 1 degrees of freedom (Table B-7). Conﬁdence intervals for can be obtained by using the fact that n/ has a chi-square distribution with n 9 1 degrees of freedom. A 100(1 9 )% conﬁdence interval for is n n L\? L\\?

(7.4.4)

The following hypothetical example illustrates the procedures. Example 7.10 Five melanoma (resected) patients receiving immunotherapy BCG are followed. The remission duration in weeks are, in order of magnitude, 8, 16, 23, 27, and 28. Suppose that the remission times follow a lognormal distribution. In this case, parameters are estimated by (7.4.2) and (7.4.3) as follows: t 8 16 23 27 28

:

log t

(log t)

2.079 2.773 3.135 3.296 3.332 ——— 14.615

4.322 7.690 9.828 10.864 11.102 ——— 43.806

14.615 : 2.923 5

:

1 1 43.806 9 (14.615) : 0.217 5 5

s :

5 : 0.271 591

182

     

The mean remission time is exp(2.923 ; 0.217/2), or 20.728, weeks and the standard deviation of the remission time is [exp(0.217) 9 1] exp(5.846 ; 0.217), or 10.204, weeks. A 95% conﬁdence interval for is 2.923 9 2.776

0.521 (4

2.923 ; 2.776

0.521 (4

or (2.200,3.646). A 95% conﬁdence interval for , following (7.4.4), is 5(0.217) 5(0.217) 11.1433 0.4844 or (0.097, 2.240). 7.4.2 Estimation of and 2 for Data with Censored Observations We ﬁrst consider samples with singly censored observations. The data consist of r exact survival times t t % t and n 9 r right-censored survival P times that are at least t , denoted by t> . Again, we use the fact that Y : log T P P has normal distribution with mean and variance . Estimates of and can be obtained from the transformed data y : log t . Many authors have G G investigated the estimation of and : for example, Gupta (1952), Sarhan and Greenberg (1956, 1957, 1958, 1962), Saw (1959), and Cohen (1959, 1961). We shall discuss the methods of Sarhan and Greenberg and Cohen because of the available table that reduces computation time and efforts. The best linear estimates of and proposed by Sarhan and Greenberg are linear combinations of the logarithms of the r exact survival times: P : a log t G G G

(7.4.5)

P : b log t G G G

(7.4.6)

and

where the coefﬁcients a and b are calculated and tabulated by Saharan and G G Greenberg for n 20 and are partially reproduced in Table B-8. The variance and covariance of and are tabulated in Table B-9. The following example illustrates the procedure. Example 7.11 Suppose that in a study of the efﬁcacy of a new drug, 12 mice with tumors are given the drug. The experimenter decides to terminate the study after 9 mice have died. The survival times are, in weeks, 5, 8, 9, 10, 12, 15, 20, 21, 25, 25;, 25;, and 25;. Assume that the times to death of these

 

183

mice follow the lognormal distribution. In this case n : 12, r : 9, and n 9 r : 3. Using (7.4.5), (7.4.6), and Table B-8, and can be calculated as : 0.036 log 5 ; 0.0581 log 8 ; 0.0682 log 9 ; 0.0759 log 10 ; 0.0827 log 12 ;0.0888 log 15 ; 0.0948 log 20 ; 0.1006 log 21 ; 0.3950 log 25 : 2.811 : 90.2545 log 5 9 0.1487 log 8 9 0.1007 log 9 9 0.0633 log 10 9 0.0308 log 12 9 0.0007 log 15 ; 0.0286 log 20 ; 0.0582 log 21 ; 0.5119 log 25 : 0.747 The variance of and given in Table B-9 are, respectively, 0.0926 and 0.0723 and the covariance of and is 0.0152. Cohen’s (1959, 1961) MLEs for the normal distribution can be used for n 20. Let y :

1 P log t G r G

(7.4.7)

and s :

1 ( log t ) G (log t ) 9 G r r

(7.4.8)

Then the MLEs of and are : y 9 ( y 9 log t ) P

(7.4.9)

: s ; ( y 9 log t ) P

(7.4.10)

and

where the value of has been tabulated by Cohen (1961) as a function of a and b. The proportion of censored observations, b, is calculated as b:

n9r n

and a:

1 9 Y (Y 9 c) (Y 9 c)

where Y : [b/(1 9 b)] f (c)/F(c), f (c) and F(c) being the density and distribu-

184

     

tion functions, respectively, of the standard normal distribution, evaluated at c : (log t 9 )/. Table 7.1 gives values of for b : 0.01 to 0.90 and a : 0.00 P to 1.00. For a censored sample, after computing a : s/(y 9 log t ), and P b : (n 9 r)/n, enter Table 7.1 with these values of a and b to obtain . For values not tabulated, two-way linear interpolation can be used. The asymptotic variances and covariance are the following: Var() :

m n

Var() :

m n

Cov(, ) :

m n

(7.4.11)

where m , m , and m are also tabulated by Cohen (1961). The table is reproduced in Table 7.2. For any censored sample, compute c : (log t 9 )/ P and then enter the appropriate columns of Table 7.2 with y : 9c , and interpolate to obtain the required values of m , i : 1, 2, 3, if the experiment was G terminated after a predetermined time. If the experiment was terminated after a given proportion of animals have died, enter Table 7.2 through the percent censored column with percentage censored : 100b and interpolate to obtain the required value of m . G To illustrate the use of Tables 7.1 and 7.2 for the computation of , , Var(), Var(), and Cov(, ), consider Example 7.12, adapted from Cohen (1961). Example 7.12 Suppose that in a laboratory experiment 300 insects were followed until 119 died within seconds, y : 1,304.832 seconds, s : 12,128.250, and log t : 1,450.000 seconds. In this case n : 300 and r : 119. Accord ingly, a :

12,128.25 : 0.575 (1,304.832 9 1,450)

b:

300 9 119 : 0.603 300

From Table 7.1, is approximately 1.36. Using (7.4.9) and (7.4.10), we obtain : 1,304.832 9 1.36(1,304.832 9 1,450) : 1,502.26 seconds : 12,128.250 ; 1.36(1,304.832 9 1,450) : 40,788.55 and : 201.96 seconds. For the variance and covariance of and , we enter Table 7.2 with percentage censored 100b : 60.3 and interpolate linearly to obtain m : 2.002,

.010100 .010551 .010950 .011310 .011642 .011952 .012243 .012520 .012784 .013036 .013279 .013513 .013739 .013958 .014171 .014378 .014579 .014755 .014967 .015154 .015338

.01

.020400 .021294 .022082 .022798 .023459 .024076 .024658 .025211 .025738 .026243 .026728 .027196 .027649 .028087 .028513 .028927 .029330 .029723 .030107 .030483 .030850

.02

.030902 .032225 .033398 .034466 .035453 .036377 .037249 .038077 .038866 .039624 .040352 .041054 .041733 .042391 .043030 .043652 .044258 .044848 .045425 .045989 .046540

.03

.041583 .043350 .044902 .046318 .047629 .048858 .050018 .051120 .052173 .053182 .054153 .055089 .055995 .056874 .057726 .058556 .059364 .060153 .060923 .061676 .062413

.04

Source: Cohen (1961). ? For all values 0 a 1, : 0.

.00 .05 .10 .15 .20 .25 .30 .35 .40 .45 .50 .55 .60 .65 .70 .75 .80 .85 .90 .95 1.00

a

.052507 .054670 .056596 .058356 .059990 .061522 .062969 .064345 .065660 .066921 .068135 .069306 .070439 .071538 .072605 .073643 .074655 .075642 .076606 .077549 .078471

.05

.063627 .066189 .068483 .070586 .072539 .074372 .076106 .077756 .079332 .080845 .082301 .083708 .085068 .086388 .087670 .088917 .090133 .901319 .092477 .0093611 .094720

.06

Table 7.1 Estimated Values for and 2

185

.074953 .077909 .080568 .038009 .085280 .087413 .089433 .091355 .093193 .094958 .096657 .098298 .099887 .10143 .10292 .10438 .10580 .10719 .10854 .10987 .11116

.07 .086488 .089834 .092852 .095629 .098216 .10065 .10295 .10515 .10725 .10926 .11121 .11308 .11490 .11666 .11837 .12004 .12167 .12325 .12480 .12632 .12780

.08 .09824 .10197 .10534 .10845 .11135 .11408 .11667 .11914 .12150 .12377 .12595 .12806 .13011 .13209 .13402 .13590 .13773 .13952 .14126 .14297 .14465

.09 .11020 .11431 .11804 .12148 .12469 .12772 .13059 .13333 .13595 .13847 .14090 .14325 .14552 .14773 .14987 .15196 .15400 .15599 .15793 .15983 .16170

.10 .17342 .17935 .18479 .18985 .19460 .19910 .20338 .20747 .21139 .21517 .21882 .22235 .22578 .22910 .23234 .23550 .23858 .24158 .24452 .24740 .25022

.15

b

.24268 .25033 .25741 .26405 .27031 .27626 .28193 .28737 .29260 .29765 .30253 .30725 .31184 .31630 .32065 .32489 .32903 .33307 .33703 .34091 .34471

.20 .31862 .32793 .33662 .34480 .35255 .35993 .36700 .37379 .38033 .38665 .39276 .39870 .40447 .41008 .41555 .42090 .42612 .43122 .43622 .44112 .44592

.25 .4021 .4130 .4233 .4330 .4422 .4510 .4595 .4676 .4755 .4831 .4904 .4976 .5045 .5114 .5180 .5245 .5308 .5370 .5430 .5490 .5548

.30 .4941 .5066 .5184 .5296 .5403 .5506 .5604 .5699 .5791 .5880 .5967 .6051 .6133 .6213 .6291 .6367 .6441 .6515 .6586 .6656 .6724

.35 .5961 .6101 .6234 .6361 .6483 .6600 6.713 .6821 .6927 .7029 .7129 .7225 .7320 .7412 .7502 .7590 .7676 .7761 .7844 .7925 .8005

.40 .7096 .7252 .7400 .7542 .7678 .7810 .7937 .8060 .8179 .8295 .8408 .8517 .8625 .8729 .8832 .8932 .9031 .9127 .9222 .9314 .9406

.45 0.8368 0.8540 0.8703 0.8860 0.9012 0.9158 0.9300 0.9437 0.9570 0.9700 0.9826 0.9950 1.007 1.019 1.030 1.042 1.053 1.064 1.074 1.085 1.095

.50 0.9808 0.9994 1.017 1.035 1.051 1.067 1.083 1.098 1.113 1.127 1.141 1.155 1.169 1.182 1.195 1.207 1.220 1.232 1.244 1.255 1.267

.55

1.145 1.166 1.185 1.204 1.222 1.240 1.257 1.274 1.290 1.306 1.321 1.337 1.351 1.366 1.380 1.394 1.408 1.422 1.435 1.448 1.461

.60

1.336 1.358 1.379 1.400 1.419 1.439 1.457 1.476 1.494 1.511 1.528 1.545 1.561 1.577 1.593 1.608 1.624 1.639 1.653 1.668 1.682

.65

1.561 1.585 1.608 1.630 1.651 1.672 1.693 1.713 1.732 1.751 1.770 1.788 1.806 1.824 1.841 1.858 1.875 1.892 1.908 1.924 1.940

.70

2.176 2.203 2.229 2.255 2.280 2.305 2.329 2.353 2.376 2.399 2.421 2.443 2.465 2.486 2.507 2.528 2.548 2.568 2.588 2.607 2.626

.80

3.282 3.314 3.345 3.376 3.405 3.435 3.464 3.492 3.520 3.547 3.575 3.601 3.628 3.654 3.679 3.705 3.730 3.754 3.779 3.803 3.827

.90

     

186

Table 7.2 Estimated Values of m1, m2. and m3 for Var( ), Var( ), and Cov(, )

y 94.0 93.5 93.0 92.5 92.4 92.3 92.2 92.1 92.0 91.9 91.8 91.7 91.6 91.5 91.4 91.3 91.2 91.1 91.0 90.9 90.8 90.7 90.6 90.5 90.4 90.3 90.2 90.1 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4

m

1.00000 1.00001 1.00010 1.00056 1.00078 1.00107 1.00147 1.00200 1.00270 1.00363 1.00485 1.00645 1.00852 1.01120 1.01467 1.01914 1.02488 1.03224 1.04168 1.05376 1.06923 1.08904 1.11442 1.14696 1.18876 1.24252 1.31180 1.40127 1.51709 1.66743 1.86310 2.11857 2.45318 2.89293 3.47293 4.24075 5.2612 6.6229 8.4477 10.903 14.224 18.735 24.892

m

0.500030 0.500208 0.501180 0.505280 0.506935 0.509030 0.511658 0.514926 0.518960 0.523899 0.529899 0.537141 0.545827 0.556186 0.568417 0.582981 0.600046 0.620049 0.643438 0.670724 0.702513 0.739515 0.782574 0.832691 0.891077 0.959181 1.03877 1.13198 1.24145 1.37042 1.52288 1.70381 1.91942 2.17751 2.48793 2.86318 3.3192 3.8765 4.5614 5.4082 6.4616 7.7804 9.4423

m

0.000006 0.000052 0.000335 0.001712 0.002312 0.003099 0.004121 0.005438 0.007123 0.009266 0.011971 0.015368 0.019610 0.024884 0.031410 0.039460 0.049355 0.061491 0.076345 0.094501 0.116674 0.143744 0.176698 0.217183 0.266577 0.327080 0.401326 0.492641 0.605233 0.744459 0.917165 1.13214 1.40071 1.73757 2.16185 2.69858 3.3807 4.2517 5.3696 6.8116 8.6818 11.121 14.319

Percentage Censored 0.00 0.02 0.13 0.62 0.82 1.07 1.39 1.79 2.28 2.87 3.59 4.46 5.48 6.68 8.08 9.68 11.51 13.57 15.87 18.41 21.19 24.20 27.43 30.85 34.46 38.21 42.07 46.02 50.00 53.98 57.93 61.79 65.54 69.15 72.57 75.80 78.81 81.59 84.13 86.43 88.49 90.32 91.92

 

187

Table 7.2 Continued

y

m

1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5

m

33.339 44.986 61.132 83.638 115.19 159.66 222.74 312.73 441.92 628.58 899.99

m

11.550 14.243 17.706 22.193 28.046 35.740 45.930 59.526 77.810 102.59 136.44

Percentage Censored

18.539 24.139 31.616 41.664 55.252 63.750 99.100 134.08 182.68 250.68 346.53

93.32 94.52 95.54 96.41 97.13 97.72 98.21 98.61 98.93 99.18 99.38

Source: Cohen (1961).

m : 1.635, and m : 1.051. Substituting these values and : 40,788.55 into (7.4.11), we obtain

Var() <

40,788.55(2.022) : 274.91 300

var() <

40,788.55(1.635) : 222.30 300

Cov(, ) <

40,788.55(1.051) : 142.90 300

When the data are progressively censored, let t , t , . . . , t be the uncensored P and t> , t> , . . . , t> be the censored observations, the likelihood function, P> P> L using (7.4.1) and (7.1.1), is

r log(2) P (log t 9 ) G 9 log t ; G 2 2 G 1 L 1 ; log exp 9 (log x 9 ) dx 2 R>G x(2 GP>

l(, ) : 9

and the MLE of and can be obtained by solving the following two

     

188 equations:

log x 9

1 (log x 9 ) dx 2

1 (log x 9 ) dx 2

exp 9

P log t 9 L R>G x(2 G ; :0 1 1 G GP> exp 9 (log x 9 ) dx 2 R>G x(2 9

P (log t 9 ) n G ; 2 2 G

(log x 9 )

exp 9

L R>G x2(2 ; :0 1 1 GP> exp 9 (log x 9 ) dx 2 R>G x(2

Again, this can be done by applying the Newton—Raphson iterative procedure. The following example illustrate the use of SAS and BMDP to obtain estimates of the lognormal parameters. Example 7.13 Referring to Example 7.5, for the observed survival data in the ﬁle ‘‘EXAMPLE.DAT’’, by changing d : exponential in SAS code to d : lnormal and accel : exponential in BMDP code to accel : lnormal we can obtain the estimated parameters of the lognormal distribution. If SAS is used, the estimated parameters of the lognormal distribution are : INTERCEPT and : SCALE where INTERCEPT and SCALE are the names of output estimated parameters in SAS procedure LIFEREG. If BMDP is used, : CONSTANT and : SCALE where CONSTANT and SCALE are given by procedure 2L.

7.5 STANDARD AND GENERALIZED GAMMA DISTRIBUTIONS The density function of the standard gamma distribution is f (t) :

(t)A\ exp(9t) ()

t 0, , 0

(7.5.1)

    

189

where () :

xA\ e\V dx ( 9 1)! if is an integer

(7.5.2)

In this section we discuss the MLE of and for data with and without censored observations. 7.5.1 Estimation of and for Data without Censored Observations Suppose that the n patients under study are followed to death and their exact survival times t , t , . . . , t are known. The MLE of and can be obtained L by solving simultaneously the two equations n L 9 t :0 G G

(7.5.3)

n ( ) L ; log t : 0 G ( ) G

(7.5.4)

and n log 9

where () is the derivative of (), () :

xA\ log(x)e\V dx

(7.5.5)

From (7.5.3), we have :

n L t G G

(7.5.6)

On eliminating , we substitute (7.5.6) into (7.5.4) and obtain ( ) (L t )L 9 log 9 log G G :0 ( ) L t /n G G

(7.5.7)

to solve for . This can be done by using the Newton—Raphson iterative procedure. Tables for the solution of (7.5.7) for as a function of R are given by Greenwood and Durand (1960), where R is the ratio of the geometric mean to the arithmetic mean of the n observations: R:

( L t )L G G L t /n G G

(7.5.8)

190

     

Wilk et al. (1962a) show that the relationship between and 1/(1 9 R) is linear. A table of values of as a function of 1/(1 9 R) given in their paper is reproduced in Table B-10. Thus if R and 1/(1 9 R) are computed from the sample, a MLE of can be found from Table B-10. For values not tabulated, linear interpolation can be used. Having so determined, can be obtained from (7.5.6). In the method of moments (Fisher, 1922), the estimators are obtained simply by equating the population mean and variance to the sample mean and variance. The moment estimators of and are * :

L t G G L (t 9 t ) G G

* :

( L t ) G G n L (t 9 t ) G G

(7.5.9)

and (7.5.10)

Both types of estimators give biased estimates. The moment estimators are easy to calculate but are inefﬁcient in the sense that their variances are larger than the variance of the MLE. To reduce the bias, Lilliefors (1971) suggests correction factors for these two types of estimators. The corrected MLE of and are, respectively, : A 1 ; 3/n

(7.5.11)

and

1 : A 1 9 A t n A

(7.5.12)

The corrected moments estimators of and are * 3 * : 9 A 1 ; 2/n n

(7.5.13)

(7.5.14)

and 1 * * : A 1 9 A t n* A

Lilliefors shows by the Monte Carlo method that the corrected MLE and the method-of-moment estimates are approximately unbiased. In addition, as long as 2, the corrected moments estimators have no more bias than the corrected MLE and for n : 10 have considerably less bias. For n : 10, 20 and 2, the variance is close to that of the MLE.

    

191

Example 7.14 Ten patients with melanoma achieve remission after surgery and therapy. They are followed to relapse. The durations of remission in months are recorded as follows: 5, 8, 10, 11, 15, 20, 21, 23, 30, and 40. Assuming that the distribution of remission duration is standard gamma, we ﬁrst calculate the MLE of and according to Wilk et al. (1962a). To compute R, we obtain L t : 183 and (L t ) : 15.43. Therefore R : 0.84 and G G G G 1/(1 9 R) : 6.25. From Table B-10, : 2.89830 for 1/(1 9 R) : 6.0 and : 3.14984 for 1/(1 9 R) : 6.5. By linear interpolation, for 1/(1 9 R) : 6.25, : 3.02407. From (7.5.6), : 0.16525. The corrected MLEs obtained from (7.5.11) and (7.5.12) are : 2.326 and : 0.122. The moment estimates of A A and following (7.5.9) and (7.5.10) are * : 0.173 and * : 3.171. With the correction factors, * : 0.1225 and * : 2.3425, which are very close to the A A corrected MLE. 7.5.2 Estimation of and for Data with Censored Observations When data are singly censored, the survival times can be ordered as t

t % t t> : % : t> P> L P

where r persons in the study have exact survival times recorded and n 9 r others have their lives terminated after the rth death occurs. In this case, the maximum likelihood procedure becomes much more complicated. Let : t , P : [P t ]P/t , and S : P t /rt . The MLE of and G G G G P P P and can be obtained by solving simultaneously log P :

n () n n J (, ) 9 log 9 9 1 r() r r J(, )

(7.5.15)

and

(7.5.16)

tA\e\ER dt

(7.5.17)

(7.5.18)

1 n e\E S: 9 91 r J(, ) where J(, ) :

and J (, ) :

J(, ) : tA\ log te\ER dt

Wilk et al. (1962a) generate, for a grid of values of P and S and n/r, tables of values of and : / based on the solutions of (7.5.15) and (7.5.16). The tables are reproduced in Table B-11. Thus, to ﬁnd and , one needs to

192

     

compute P and S ﬁrst. For speciﬁc values of P, S, and n/r, and may be looked up from Table B-11. Then can be obtained from : /[t ]. P Interpolations may be needed when any of the values of P, S, and n/r are not tabulated. Example 7.15, adapted from Wilk et al. (1962a), illustrates the procedure of calculating , , and when Table B-11 is used. This method can also be used in the case of a complete sample (no censored observations); that is, r : n. If it is obvious that some of the observations may be outliers (too large or too small), it is reasonable not to use them in estimation. In this case, r is the number of observations used in the estimation procedure. Example 7.15 Consider an experiment with n : 34 animals. The following data are the lifetimes t in weeks of 34 animals: 3, 4, 5, 6, 6, 7, 8, 8, 9, 9, 9, 10, G 10, 11, 11, 11, 13, 13, 13, 13, 13, 17, 17, 19, 19, 25, 29, 33, 42, 42, 52, 52;, 52;, and 52;. The study is terminated when 31 animals have died and the other 3 are sacriﬁced. In our notation, n : 34 and r : 31. 1. Compute n/r, P, and S: n 34 : : 1.10 r 31 S:

t 487 G: : 0.30 rt (31)(52) P

To compute P, it is easier ﬁrst to compute log P: 1 1 log P : log t 9 log t : ;33.90207 9 1.716 : 90.622385 G P 31 r Hence P : 0.24. 2. Consider the entries for n/r : 1.10 and P : 0.24 in Table B-11: S : 0.28:

: 1.986 : 0.365

S : 0.32:

: 1.449 : 0.410

Using linear interpolation, approximate estimates of and are : 1.72 and : 0.39. 3. Finally, : 1.72/(0.39;52) : 0.085. For a more accurate two-way interpolation, the reader is referred to Wilk et al. (1962a).

    

193

When the data are progressively censored, let t , t , . . . , t be the uncensored P and t> , t> , . . . , t> be the censored observations; the likelihood function is P> P> L l(, ) : log L (, ) : n log 9 n log () P L ; [( 9 1) log t 9 t ] ; log G G G GP>

xA\e\HV dx

R>G

and the MLE of and can be obtained by solving the two equations

n P L 9 t9 G G GP>

n log 9

xAe\HV dx R>G :0 xA\e\HV dx R>G

xA\e\HV log(x) dx n () P L R>G ; log t ; :0 G () G GP> xA\e\HV dx R>G

using the Newton—Raphson iterative procedure. 7.5.3 Estimation of , , and in the Extended Generalized Gamma Distribution for Data with or without Censored Observations The extended generalized gamma distribution has density function deﬁned in (6.4.10), f (t) : A?At?A\

exp[9(t)?] ()

t 0,

0,

0

(7.5.19)

Let us consider the case 0. Let t , t , . . . , t be the uncensored and P t> , . . . , t> the censored observations from n persons and the survival times P> L follow the generalized gamma distribution. Then the likelihood function is l(, , ) : n log ; n log ; n log 9 n log () P ; [( 9 1)log t 9 (t )?] G G G L ; log x?A\ exp[9(x)?] dx R>G GP>

194

     

and the MLE of , , and can be obtained by solving the three equations

x?A\>? exp(9(x)?) dx n P L R>G 9 ?\ t? 9 ?\ :0 G G GP> x?A\ exp(9(x)?) dx R>G n log ; n log ; n 9

L R>G ; GP>

(7.5.20)

n () P ; [ log t 9 (t )?] G G () G

x?A\ exp[9(x)?][ log(x) 9 (x)?] dx

:0

(7.5.21)

x?A\ exp(9(x)?) dx

R>G

n P n log ; ; [ log t 9 (t )? log(t )] G G G

G

x?A\ exp[9(x)?][ log (x) 9 (x)? log(x)] dx L C ; R>G : 0 (7.5.22) GP> x?A\ exp[9(x]?) dx R>G

using the Newton—Raphson iterative procedure. If all the observed survival times are uncensored, the respective equations for the MLE of , , and can be obtained simply by replacing r with n in (7.5.20)—(7.5.22). The SAS procedure LIFEREG can be used to obtain the MLE of , , and in the extended generalized gamma distribution. Example 7.16 Referring to Example 7.5, for the observed survival data in the ﬁle ‘‘EXAMPLE.DAT‘, by changing d : exponential in the SAS code to d : gamma, one can obtain the MLE of the parameters of the extended generalized gamma distribution:

: exp(9INTERCEPT)

:

SHAPE1 SCALE

:

1 SHAPE1

where INTERCEPT, SHAPE1, and SCALE are given by the SAS LIFEREG procedure.

- 

195

7.6 LOG-LOGISTIC DISTRIBUTION The log-logistic distribution has the density function f (t) :

tA\ (1 ; tA)

(7.6.1)

1 1 ; tA

(7.6.2)

and survivorship function S(t) :

where t 0, 0, 0. Let t , t , . . . , t be the uncensored and t> , P> P t> , . . . , t> the censored observations from n persons and the survival times P> L follow the log-logistic distribution. Then the MLE of and can be obtained from solving the following two simultaneous equations:

P tA L t>A G ; G r9 2 :0 A 1 ; t 1 ; t>A G GP> G G r P P tA log(t ) L t>A log(t >) G G ; G ; log(t ) 9 2 G :0 G 1 ; tA 1 ; t>A G G G G GP>

(7.6.3) (7.6.4)

using the Newton—Raphson iterative procedure. If all the survival times observed are uncensored, the respective equations for the MLE of and can be obtained simply by replacing r with n in (7.6.3) and (7.6.4). Example 7.17 Referring to Example 7.5, for the observed survival data in ﬁle ‘‘EXAMPLE.DAT‘, replacing d : exponential in the SAS code by d : llogistic and accel : exponential in the BMDP code by accel : llogistic, we can obtain the estimated parameters of the log-logistic distribution. If SAS is used, the estimated parameters of the log-logistic distribution are

: exp 9

INTERCEPT SCALE

and :

1 SCALE

where INTERCEPT and SCALE are given by the SAS LIFEREG procedure. If BMDP is used,

: exp 9

CONSTANT SCALE

and :

1 SCALE

where CONSTANT and SCALE are produced by the BMDP procedure 2L.

     

196

Example 7.18 Assume that the tumor-free time of the 30 rats in the low-fat diet group in Table 3.4 follows the log-logistic distribution. The estimates of the two parameters from either SAS or BMDP are : 0.000025484 and : 2.01866. Therefore, from Section 6.5, the median survival time for this group is 188.64 days, and the hazard function approach the peak at 190.37 days.

7.7 OTHER PARAMETRIC SURVIVAL DISTRIBUTIONS The Gompertz distribution (Section 6.6) has the following survivorship and probability density functions:

S(t) : exp 9

eH (eAR 9 1)

1 f (t) : exp ( ; t) 9 (eH>AR 9 eH)

(7.7.1)

(7.7.2)

7.7.1 Estimation of and for Data with or without Censored Observations Assume that t , t , . . . , t are the observed survival times from n individuals and L the survival times follow the Gompertz distribution, without loss of generality, and assume that t , t , . . . , t are uncensored and t>, t> , . . . , t> right-censored. P P> L P The MLE of and can be obtained by solving the equations

P L [1 9 exp(t )] ; [1 ; exp(t>)] : 0 (7.7.3) G G G GP> L P eH P t9 [1 ; (t 9 1) exp(t )] ; [1 ; (t > 9 1) exp(t>)] : 0 G G G G G G G GP> (7.7.4) r;

eH

using the Newton—Raphson iterative procedure. If all t , t , . . . , t are uncensored, the MLE of and can be obtained L similarly by replacing r with n in (7.7.3) and (7.7.4). The MLE of the parameters of the other models in Section 6.6 can be obtained in a similar manner. Bibliographical Remarks In addition to the papers cited in this chapter, Gross and Clark (1975) have chapters on estimation and inference in the exponential distribution and on the estimation of parameters of three distributions, including the Weibull and



197

gamma. Mann et al. (1974), Lawless (1982), and Nelson (1982) also provide a chapter on the estimation procedures for survival distributions, including the exponential, Weibull, gamma, and lognormal. A more recent book is by Klein and Moeschberger (1997). Readers with a background in mathematical statistics and an interest in mathematical treatment of estimation procedures are referred to these books.

EXERCISES 7.1 Consider the survival times given in Exercise 8.2. Assuming that they follow the one-parameter exponential distribution, obtain: (a) The MLE of (b) The MLE of (c) The 95% conﬁdence intervals for and 7.2 Assuming that the correct entries between errors in Exercise 8.3 follow the two-parameter exponential distribution, obtain: (a) An estimate of G (b) The MLE of (c) The MLE of (d) The probability of 100 correct entries between two errors 7.3 Consider the survival data in Exercise 8.5. Obtain the MLE of the parameter(s) and mean survival times, assuming: (a) A one-parameter exponential distribution (b) A Weibull distribution 7.4 In a study of deep venous thrombosis, the following blood clot lysis times in hours were recorded from 20 patients: 2, 3, 4, 5.5, 9, 13, 16.5, 17.5, 12.5, 7, 6, 17.5, 11.5, 6, 14, 25, 49, 37.5, 49, and 28. Assume that the blood clot lysis times follow the lognormal distribution. (a) Obtain MLEs of the parameters and . (b) Obtain 95% conﬁdence intervals for and . 7.5 Consider the following tumor-free times in days of 10 animals: 2, 3.5, 5, 7, 9, 10, 15, 20, 30, and 40. Assume that the tumor-free times follow the log-logistic distribution. Estimate the parameters and .

Statistical Methods for Survival Data Analysis. Elisa T. Lee and John Wenyu Wang Copyright ¶ 2003 John Wiley & Sons, Inc. ISBN: 0-471-36999-7

CHAPTER 8

Graphical Methods for Survival Distribution Fitting

The use of probability models for survival experience has played an increasingly important role in biomedical sciences. Survival models summarize the survival pattern, suggest further studies, and generate hypotheses. In this chapter we introduce three graphical methods for survival distribution ﬁtting. In Section 8.1 we discuss the advantages of the graphical techniques. In Section 8.2 we discuss probability plotting, including how to make probability plots and how to estimate parameters from them. In Section 8.3 we discuss the theory and applications of hazard plotting for censored data. In Section 8.4 we introduce the Cox—Snell residual method.

8.1 INTRODUCTION Graphical methods have long been used for display and interpretation of data because they are simple and effective. Often used in place of or in conjunction with numerical analysis, a plot of data serves a number of purposes simultaneously that no numerical method can. The basic idea of the three graphical methods is to see if the survival time itself, or a function of it, has a linear relationship with the distribution function and the cumulative hazard function of a given parametric distribution, or a function of the distribution function and the cumulative hazard function. If such a linear relationship exists, it can be demonstrated graphically as a straight line. Thus, if one chooses the appropriate distribution and makes a probability, or hazard, plot, the result will be a straight line ﬁt to the data. Parameters of the distribution chosen can be estimated from the probability or hazard plots without tedious numerical calculations. Such estimates may be adequate and useful for preliminary purposes. However, prior information is often not sufﬁcient to choose a suitable distribution, and the plot may not be a straight line. If the plot is not a straight line, there is no need to estimate the parameters and an alternative 198



199

Figure 8.1 Two curved normal probability plots.

distribution may be selected. If the Cox—Snell residual plotting method is used, estimates of the parameters must be obtained ﬁrst. A nonlinear plot can provide insight into the data. There are several possible interpretations. First, the wrong theoretical distribution might have been used. Second, the sample might be from a mixture of populations. In the latter case, it is necessary to separate the data accordingly and make a separate plot for each population. If one or two points are way out of line, they might be the results of errors in collecting and recording the data or they might not be from the same population. Other reasons for peculiar looking plots and interpretations of them are discussed by King (1971) and Hahn and Shapiro (1967). Consider the normal probability plots in Figures 8.1a and b. The plot in Figure 8.1a is convex, indicating that the data have a long tail to the left and could be from a distribution with a negatively skewed density function such as in Figure 8.2a. On the contrary, the concave plot in Figure 8.1b indicates that

Figure 8.2 Two skewed density functions.

200

     

the data have a long tail to the right and could be from a distribution with a positively skewed density function such as in Figure 8.2b. From the discussion in Chapter 6, we may try to ﬁt a lognormal or gamma distribution. The advantages of graphical methods can be summarized as follows: 1. They are fast and simple to use, in contrast with numerical methods, which may be computationally tedious and require considerable analytical sophistication. The additional accuracy of numerical methods is usually not great enough in practice to warrant the effort involved. 2. Probability and hazard plots provide approximate estimates of the parameters of the distribution by simple graphical means. 3. They allow one to assess whether a particular theoretical distribution provides an adequate ﬁt to the data. 4. Peculiar appearance of a plot or points in a plot can provide insight into the data when the reasons for the peculiarities are determined. 5. A graph provides a visual representation of the data that is easy to grasp. This is useful not only for oneself but also in presenting data to others, since a plot allows one to assess conclusions drawn from the data by graphical or numerical means.

8.2 PROBABILITY PLOTTING The basic ideas in probability plotting are illustrated by the following example. Example 8.1 Consider the white blood cell counts (WBCs) of 23 pediatric leukemia patients given in Table 8.1, ranging from 8000 to 120,000. A sample cumulative distribution is constructed by ordering the data from smallest to largest, as shown in Table 8.1. A sample cumulative distribution curve can then be made by plotting each WBC value versus the percentage of the sample equal to or less than that value. That is, the ith ordered data value in a sample of n values is plotted against the percentage 100i/n. Note that for tied observations, we compute and plot the sample distribution only for the one with the largest i value. This gives a conservative estimate of the survivorship function. For example, the third value of WBC, 10, is plotted against a percentage of 100;3/23 : 13%. A plot of the cumulative distribution function for most large populations contains many closely spaced values and can be well approximated by a smooth curve drawn though the points. In contrast, a sample cumulative distribution function has a relatively small number of points and thus somewhat ragged appearance. To approximate the population cumulative distribution function, one draws a smooth curve through the data points, obtaining a best ﬁt by eye. Such a curve from the WBC data is given in Figure 8.3. It is an

 

201

Table 8.1 Ordered WBCs Data and Sample Cumulative Distribution for Example 8.1 Sample Distribution WBC (10) 8 8 10 15 20 30 50 50 50 50 50 60 60 75 75 80 80 90 90 90 100 110 120

Order, i 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

i/23

(i 9 0.5)/23

\(F )?

0.087 0.130 0.174 0.217 0.261

0.065 0.109 0.152 0.196 0.239

91.512 91.233 91.027 90.857 90.709

0.478

0.457

90.109

0.565

0.543

0.109

0.652

0.630

0.333

0.739

0.717

0.575

0.870 0.913 0.957 1.000

0.848 0.891 0.935 0.978

1.027 1.233 1.512 2.019

? \( · ) denotes the inverse of the standard normal distribution function.

estimate of the cumulative distribution function of the population and is used to obtain estimates and other information about the population. An estimate of the population median (50th percentile) is obtained by entering the plot on the percentage scale at 50% going horizontally to the ﬁtted line and then vertically down to the data scale to read the estimate of the median. For the WBC data, an estimate of the population median is 65,000. The median is a representative of nominal value for the population since half of the population values are above it and half below. An estimate of any other percentile can be obtained similarly by entering the plot at the appropriate point on the percentage scale going horizontally to the ﬁtted line and then vertically down to the data scale where the estimate is read. For example, an estimate for the 25th percentile is 40,000.

202

     

Figure 8.3 Sample cumulative distribution curve of the WBC data.

One can obtain an estimate of the proportion of the population that has a WBC below a speciﬁc value in a similar way. For example, to ﬁnd the proportion of the population with a WBC of 10,000 or less, you enter the plot on the horizontal axis at the given value, 10, go vertically up to the line ﬁtted to the data, and then horizontally to the probability scale, where the estimate of the population proportion is read, 8%. An estimate of the proportion of a population between two given values is obtained by ﬁrst getting an estimate of the proportion below each value and then taking the difference. For example, the estimate of the population proportion with WBC between 10,000 and 65,000 is 50 9 8 : 42%. As mentioned above, a smooth curve can be ﬁtted by eye to a sample cumulative distribution function to obtain an estimate of the population distribution function. Also, one can ﬁt data with a theoretical cumulative distribution function by using a probability plot and then use this plot to estimate the parameters in the theoretical cumulative distribution function. The distribution may be the normal, lognormal, exponential, Weibull, gamma, or log-logistic. To make a probability plot, one generally uses (i 9 0.5)/n or i/(n ; 1) to estimate the sample cumulative distribution function at the ith ordered value of the n observations in the sample. The (i 9 0.5)/n for the WBC data are given in Table 8.1. The probability plot is so constructed that if the theoretical distribution is adequate for the data, the graph of a function of t (used as the y-axis) versus a function of the sample cumulative distribution function (used as the x-axis) will be close to a straight line. The parameters of the theoretical distribution can then be estimated from a ﬁtted line. This is carried out as follows. Step 1. A theoretical distribution for the survival time t has to be selected. Step 2. The sample cumulative distribution function is estimated by using (i 9 0.5)/n or i/(n ; 1), i : 1, 2, . . . , n, for the ith ordered t value. For tied

 

203

observations have the same value, the sample cumulative distribution function is plotted against only the t with the largest i value. Step 3. Plot t or a function of it versus the estimated sample cumulative distribution or a function of it. Step 4. Fit a straight line through the points by eye. The position of the straight line should be chosen to provide a ﬁt to the bulk of the data and may ignore outliers or data points of doubtful validity. Figure 8.4 gives a normal probability plot of the WBC versus \(F), where \( · ) is the inverse of the standard normal distribution function. The values of \(F (WBC )) are shown in Table 8.1. The plot is reasonably linear. The G straight line ﬁtted by eye in a probability plot can be used to estimate percentiles and proportions within given limits in the same manner as for the sample cumulative distribution curve. In addition, a probability plot provides estimates of the parameters of the theoretical distribution chosen. The mean (or median) WBC estimated from the normal probability plot in Figure 8.4 is 56,000 [at \(F) : 0, F : 0.5 and WBC : 56,000]. At \(F) : 1, WBC : 91,000, which corresponds to the mean plus 1 standard deviation. Thus, the standard deviation is estimated as 35,000. We now discuss probability plots of the exponential, Weibull, lognormal, and log-logistic distributions.

Figure 8.4 Normal probability plot of the WBC data in Example 8.1.

     

204

Exponential Distribution The exponential cumulative distribution function is F(t) : 1 9 exp[9(t)]

t0

(8.2.1)

The probability plot for the exponential distribution is based on the relationship between t and F(t), from (8.2.1), 1 1 t : log 1 9 F(t)

(8.2.2)

This relationship is linear between t and the function log[1/(1 9 F(t))]. Thus, an exponential probability plot is made by plotting the ith ordered observed survival time t versus log[1/(1 9 F (t ))], where F (t ) is an estimate of F(t ), G G G G for example, (i 9 0.5)/n, for i : 1, . . . , n. From (8.2.2), at log1/[1 9 F(t)] : 1, t : 1/. This fact can be used to estimate 1/ and thus from the ﬁtted straight line. That is, the value t Table 8.2 Probability Plotting for Example 8.2

t 1 1 2 2 3 4 4 5 5 6 8 8 9 10 10 12 14 16 20 24 34

Order, i 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

F, (i 9 0.5)/21

log[1/(1 9 F)]

0.071

0.074

0.167 0.214

0.182 0.241

0.310

0.370

0.405 0.452

0.519 0.602

0.548 0.595

0.793 0.904

0.690 0.738 0.786 0.833 0.881 0.929 0.976

1.173 1.340 1.540 1.792 2.128 2.639 3.738

 

205

corresponding to log1/[1 9 F(t)] : 1 is an estimate of the mean 1/ and its reciprocal is an estimate of the hazard rate . Example 8.2 Suppose that 21 patients with acute leukemia have the following remission times in months: 1, 1, 2, 2, 3, 4, 4, 5, 5, 6, 8, 8, 9, 10, 10, 12, 14, 16, 20, 24, and 34. We would like to know if the remission time follows the exponential distribution. The ordered remission times t and the log1/ G [1 9 F(t)] are given in Table 8.2. The exponential probability plot is shown in Figure 8.5. A straight line is ﬁtted to the points by eye, and the plot indicates that the exponential distribution ﬁts the data very well. At the point log[1/ (1 9 F(t))] : 1.0, the corresponding t, approximately 9.0 months, is an estimate of the mean 1/ and thus an estimate of the hazard rate is : 1/9 : 0.111 per month. An alternative is to use (7.2.5) to estimate , : 21/198 : 0.107, which is very close to the graphical estimate. Weibull Distribution The Weibull cumulative distribution function is F(t) : 1 9 exp[9(t)A]

t 0, 0, 0

(8.2.3)

The probability plot for the Weibull distribution is based on the relationship

1 1 1 log t : log ; log log 1 9 F(t)

Figure 8.5 Exponential probability plot of the data in Example 8.2.

(8.2.4)

206

     

between t and the cumulative distribution function F of t obtained from (8.2.3). This relationship is linear between log t and the function log(log1/[19F(t)]). Thus, a Weibull probability plot is a graph of log(t ) and log(log1/ G [1 9 F (t )]), where F (t ) is an estimate of F(t ), for example, (i 9 0.5)/n, for G G G i : 1, . . . , n. The shape parameter is estimated graphically as the reciprocal of the slope of the straight line ﬁtted to the graph. If the ﬁtted line is appropriate, then at log(log1/[1 9 F(t)]) : 0, the corresponding log(t) is an estimate of log(1/) from (8.2.4). This fact can be used to estimate 1/ and thus graphically from a Weibull probability plot. At log(log1/[1 9 F(t)]) : 0.5, (8.2.4) reduces to log t : log(1/) ; 0.5/. This equation can be used to estimate . Estimates of the parameters can also be obtained from the method described in Chapter 7 if the Weibull distribution appears to be a good ﬁt graphically. The following hypothetical example illustrates the use of the Weibull probability plot. The small number of observations used in the example is only for illustrative purposes. In practice, many more observations are needed to identify an appropriate theoretical model for the data. Example 8.3 Six mice with brain tumors have survival times, in months of 3, 4, 5, 6, 8, and 10. Log(t ) plotted against log(log1/[1 9 (i 9 0.5)/6]) for G i : 1, . . . , 6 is shown in Figure 8.6. A straight line is ﬁtted to the data point by eye. From the ﬁtted line, at log(log1/[1 9 F(t)]) : 0, the corresponding log(t) : 1.9, and thus an estimate of 1/ is approximately 6.69 [:exp(1.9)] months and an estimate of is 0.150. At log(log1/[1 9 F(t)]) : 0.5, the corresponding log(t) : 2.09, and thus an estimate of : 0.5/(2.09—1.9) : 2.63. The maximum likelihood estimates of and obtained from the SAS procedure LIFEREG are 2.75 and 0.148, respectively. The graphical estimates of and are close to the MLE. Lognormal Distribution If the survival time t follows a lognormal distribution with parameters and , log t follows the normal distribution with mean and variance . Consequently, (log t 9 )/ has the standard normal distribution. Thus, the lognormal distribution function can be written as F(t) :

log t 9

t0

(8.2.5)

where ( · ) is the standard normal distribution function and and are, respectively, the mean and standard deviation of log t. A probability plot for the lognormal distribution is based on the following relationship obtained from (8.2.5): log t : ; \(F(t))

(8.2.6)

 

207

Figure 8.6 Weibull probability plot of the data in Example 8.3.

The function \( · ) is the inverse of the standard normal distribution function or its 100F percentile. This relationship is linear between the value log t and the function \(F(t)). Thus, a log-normal probability plot is a graph of log(t ) versus \(F (t )), where F (t ) is an estimate of F(t ). G G G G From (8.2.6), at \(F(t)) : 0, log t : ; and at, \(F(t)) : 1, : log t 9 . These facts can be used to estimate and from a straight line ﬁtted to the graph.

Example 8.4 In a study of a new insecticide, 20 insects are exposed. Survival times in seconds are 3, 5, 6, 7, 8, 9, 10, 10, 12, 15, 15, 18, 19, 20, 22, 25, 28, 30, 40, and 60. Suppose that prior experience indicates that the survival time follows a lognormal distribution; that is, some insects might react to the insecticide very slowly and not die for a long time. The log(t ) versus G \[(i 9 0.5)/20], i : 1, . . . , 20, are plotted in Figure 8.7. The plot shows a reasonably straight line. From the ﬁtted line, at \(F(t)) : 0, log t is an estimate of , which is equal to 2.64, and at \(F(t)) : 1, log t : 3.4 and thus : 3.4 9 2.64 : 0.76. \(F(t)) can be obtained by applying Microsoft Excel function NORMSINV.

208

     

Figure 8.7 Lognormal probability plot of the data in Example 8.4.

Log-Logistic Distribution The log-logistic distribution function is F(t) :

tA 1 ; tA

t 0, 0, 0

(8.2.7)

A probability plot for the log-logistic distribution is based on the following relationship obtained from (8.2.7):

1 1 1 9 1 9 log

log t : log 1 9 F(t)

(8.2.8)

Thus, a log-logistic probability plot is a graph of log(t ) versus log(1/ G [1 9 F (t )] 9 1), where F (t ) is an estimate of F(t ), for example, (i 9 0.5)/n, G G G for i : 1, . . . , n. From (8.2.8), at log[1/(1 9 F)] 9 1 : 0, log t : 9(1/) log ; and at log[1/(1 9 F)] 9 1 : 1, log t : (1/)(1 9 log ). These facts can be used to estimate and . The following example illustrates the log-logistic probability plot. Example 8.5 Consider the following survival times of 10 experimental rats in days: 8, 15, 25, 30, 50, 90, 95, 100, 150, and 300. Figure 8.8 plots log(t ) G

 

209

Figure 8.8 Log-logistic probability plot of the data in Example 8.5.

against log(1/[1 9 (i 9 0.5)/10] 9 1) for i : 1, . . . , 10. To estimate and , from the ﬁtted line, at log(1/[1 9 F(t)] 9 1) : 0, log t : 4.0; and at log(1/ [1 9 F(t)] 9 1) : 1, log t : 4.6. Thus, we have two equations: 1 1 4.0 : 9 log and 4.6 : (1 9 log ) From these two equations, : 1.667 and : 0.0013.

8.3 HAZARD PLOTTING Hazard plotting (Nelson 1972, 1982) is analogous to probability plotting, the principal difference being that the survival time (or a function of it) is plotted against the cumulative hazard function (or a function of it) rather than the distribution function. Hazard plotting is designed to handle censored data. Similar to probability plotting, estimates of parameters in the distribution can be determined from the hazard plot with little computational effort. To determine if a set of survival time with censored observation is from a given theoretical distribution, we construct a hazard plot by plotting the survival time (or a function of it) versus an estimation cumulative hazard (or

210

     

a function of it). The cumulative hazard function can be estimated by following the steps below. Step 1. Order the n observations in the sample from smallest to largest without regard to whether they are censored. If some uncensored and censored observations have the same value, they should be listed in random order. In the list of ordered values, the censored data are each marked with a plus. Step 2. Number the ordered observations in reverse order, with n assigned to the smallest data value, n 9 1 to the second smallest, and so on. The numbers so obtained are called K values or reverse-order numbers. For the uncensored observation, K is the number of subjects still at risk at that time. Step 3. Obtain the corresponding hazard value for each uncensored observation. Censored observations do not have a hazard value. The hazard value for an uncensored observation is 1/K. This is the fraction of the K individuals who survived that length of time and then failed. It is an observed conditional failure probability for an uncensored observation. Step 4. For each uncensored observation, calculate the cumulative hazard value. This is the sum of the hazard values of the uncensored observation and of all preceding uncensored observations. For tied uncensored observations, the cumulative hazard is evaluated only at the smallest K among the uncensored observations. The table in the following example illustrates the procedure. Example 8.6 Consider the remission data of the 21 leukemia patients receiving 6-MP in Example 3.3. Table 8.3 illustrates the procedure for estimating the cumulative hazard function. We now discuss the basic idea underlying hazard plotting for the exponential, Weibull, lognormal, and log-logistic distributions. Exponential Distribution The exponential distribution has constant hazard function h(t) : . Thus, the cumulative hazard function is H(t) : t

(8.3.1)

From (8.3.1), the time can be written as a linear function of the cumulative hazard H, 1 t : H(t)

(8.3.2)

Thus, t plots as a straight-line function of H. The slope of the ﬁtted line is the

 

211

Table 8.3 Estimation of Cumulative Hazard

t 6 6; 6 6 7 9; 10 10; 11; 13 16 17; 19; 20; 22 23 25; 32; 32; 34; 35;

Reversed Order, K 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

Hazard, 1/K

Cumulative Hazard, H (t)

0.048 0.053 0.056 0.059

0.156 0.215

0.067

0.281

0.083 0.091

0.365 0.456

0.143 0.167

0.598 0.765

mean survival time 1/ of the distribution. More simply, 1/ is the value of t when H(t) : 1. This fact is used to estimate 1/ from an exponential hazard plot. Example 8.7 Using the estimated cumulative hazard values H (t) in Table 8.3, we construct the exponential hazard plot in Figure 3.5 by plotting each exact time t against its corresponding H (t). The conﬁguration appears to be reasonably linear, suggesting that the exponential distribution provides a reasonable ﬁt. In Chapter 3 we see that the Weibull distribution gives a better ﬁt than the exponential. We use the data here just to demonstrate how the parameter can be estimated. To ﬁnd an estimate for the mean remission time of the leukemia patients, we can use H(t) : 0.5 since the time for which H : 1 is out of the range of the horizontal axis. At H(t) : 0.5, t : 16.9, from (8.3.2), an estimate of is 0.5/16.9 : 0.0296. Thus, an estimate of the mean remission time is 34 weeks.

212

     

Weibull Distribution The Weibull distribution has the hazard function h(t) : (t)A\

t0

The cumulative hazard function is H(t) : (t)A

t0

(8.3.3)

and is plotted in Figure 8.9 for four different values of : 0.5, 1, 2, and 4. From (8.3.3), the time t can be written as a function of the cumulative hazard function, that is, 1 t : [H(t)]A

(8.3.4)

Taking the logarithm of (8.3.4), we obtain 1 1 log t : log ; log H(t)

(8.3.5)

Since log t is a linear function of log H(t), a plot of log t against log H(t) is a straight line. For log H(t) : 0 or H(t) : 1, (8.3.5) reduces to log t : log(1/), and thus the corresponding time t equals 1/. This fact is used to estimate 1/ and consequently, . The slope of the ﬁtted straight line is 1/, or at log H(t) : 1, (8.3.5) can be written as : 1/(log t ; log ). This equation can be used to estimate .

Figure 8.9 Cumulative hazard functions of the Weibull distribution with :0.5, 1, 2, 4.

 

213

Figure 8.10 Weibull hazard plot of the data in Example 8.8.

Example 8.8 Consider the following survival times in months of 14 patients: 15, 25, 38, 40;, 50, 55, 65, 80;, 90, 140, 150;, 155, 250;, 252. Figure 8.10 is the hazard plot with log t versus log H(t) of the data. From the ﬁtted line, at log H(t) : 0, log t : 4.8. Thus, t : 121.5 and the estimate of is : 1/t : 0.0082. Similarly, at, log H(t) : 1, log t : 5.6, and thus : 1/ (5.6 9 4.8) : 1.25. Lognormal Distribution The density function of a lognormal distribution is f (t) : :

1 t (2

exp 9

1 (log t 9 ) 2

log t 9 1 g t

t0

(8.3.6)

where g(x) is the standard normal density function. The lognormal cumulative distribution function is F(t) :

log t 9

t0

(8.3.7)

214

     

where ( · ) is the standard normal distribution function. Thus, by (2.10), the hazard function can be written as

log t 9 1 g t h(t) : log t 9 19

(8.3.8)

The cumulative hazard function, plotted in Figure 8.11 for three values of , is

H(t) : 9log 1 9

log t 9

(8.3.9)

From (8.3.9), the logarithm of the survival time t as a function of the cumulative hazard H is log t : ; \[1 9 e\&R]

(8.3.10)

where \( · ) is the inverse of the standard normal distribution function. Thus, log t is a linear function of \[1 9 e\&R]. The log-normal hazard plot is a graph of log t versus \[1 9 e\&R]. From (8.3.10), at \[1 9 e\&R] : 0, log t : ; and at \[1 9 e\&R] : 1, log t : ; . These facts can be used to estimate and . Example 8.9 Consider the following remission times in months of 18 cancer patients: 4, 5, 6, 7, 8, 9;, 12, 12;, 13, 15, 18, 20, 25, 26;, 28;, 35, 35;, 56. Figure 8.12 gives the log-normal hazard plot. From the ﬁtted line by eye, at \[1 9 e\&R] : 0, log t : 2.8; and at \[1 9 e\&R] : 1,

Figure 8.11 Cumulative hazard functions of the lognormal distribution with : 0.1, 0.5, 1.0.

—  

215

log t : 3.76. Thus, the estimate of is 2.8 and the estimate of is 3.76 9 2.8 : 0.96. Log-Logistic Distribution The cumulative hazard function of the log-logistic distribution is H(t) : log(1 ; tA) This equation can be written as 1 1 log t : logexp[H(t)] 9 1 9 log

(8.3.11)

Thus, log t is a linear function of logexp[H(t)] 9 1. A log-logistic hazard plot is a graph of log t versus logexp[H(t)] 9 1. From (8.3.11), at logexp[H(t)] 9 1 : 0, log t : 9(1/) log ; and at logexp[H(t)] 9 1 : 1, log t : (1/) 9 (1/) log . These facts can be used to estimate and . 8.4 COX--SNELL RESIDUAL METHOD The Cox—Snell (1968) residual method can be applied to any parametric model. The Cox—Snell residual r for the ith individual with observed survival G time t , uncensored or censored, is deﬁned as G r : 9log S (t ) i : 1, 2, . . . , n (8.4.1) G G

Figure 8.12 Lognormal hazard plot of the data in Example 8.9.

216

     

where S (t) is the estimated survival function based on the MLE of the parameters. If the observed t is censored, the corresponding r is also censored. G G Since the cumulative hazard function H(t) :9log S(t), the Cox—Snell residual r is an estimated cumulated hazard value at t . The important property of the G G Cox—Snell residual is that if the model selected ﬁts the data, r ’s follow the unit G exponential distribution with density function f (r) : e\P. 0 Let S (r) denote the survival function of the Cox—Snell residual r . Then 0 G S : f (x) dx : e\V dx : e\P, and P 0 P 0 9log S (r) : 9log(e\P) : r (8.4.2) 0 Let S (r) denote the Kaplan—Meier estimate of S (r). It is clear from (8.4.2) 0 0 that the plot of r versus 9log S (r ) should be a straight line with unit slope G 0 G and zero intercept if the ﬁtted survival distribution is appropriate, regardless of the form of the distribution. The procedure for using Cox—Snell residuals can be summarized as follows. 1. Use the methods shown in Sections 7.1 to 7.7 to ﬁnd the MLE of the parameters of the selected theoretical distribution. 2. Calculate Cox—Snell residuals r : 9log S (t ), i : 1, 2, . . . , n, where S (t ) G G G is the estimated survival function with the MLE of the parameters. 3. Apply the Kaplan—Meier method to estimate the survival function S (r) 0 of the Cox—Snell residuals r ’s obtained in step 2, then using the estimate G S (r), calculate 9log S (r ), i : 1, 2, . . . , n. 0 0 G 4. Plot r versus 9log S (r ), i : 1, 2, . . . , n. If the plot is closed to a straight G 0 G line with unit slope and zero intercept, the ﬁtted distribution is appropriate. From (8.4.1), if an individual survival time is right-censored, say, t> and G the ﬁtted model is correct, the corresponding Cox—Snell residual 9log S(t >) : H(t >) is smaller than the residual evaluated at an uncensored G G observation with the same value t since H(t) is a monotone-increasing function G of t. To take this into account, two modiﬁed Cox—Snell residuals have been proposed for censored observations (Crowley and Hu, 1977). One is based on the mean, and the other is based on the median (:log 2 : 0.693) of the unit exponential distribution by assuming that difference between H(t ) and H(t >) G G also follows the unit exponential distribution. For a censored observation t>, G the modiﬁed residual r> is deﬁned as G r> : r ; 1 (8.4.3) G G or r> : r ; 0.693 where r : 9log S (t ) (8.4.4) G G G G Example 8.10 Consider the tumor-free time data observed from rats fed with saturated diets in Table 3.4. We select the lognormal distribution for this

—  

217

set of data for illustrative purposes. Using methods discussed in Chapter 7, the MLE of the parameters obtained are : 4.76458 and : 0.56053. We then calculate the Cox—Snell residuals r : 9log S(t ) : 9log[1 9 F(t )], where G G G F(t) is the distribution function of the lognormal distribution. An easy way to compute r for the lognormal distribution is to use the relationship between the G normal and lognormal distributions, i.e., the distribution function of the lognormal distribution, F(t), is equivalent to [(log t 9 )/ ], where ( ) is the distribution function of the standard normal distribution. We can use Microsoft Excel function NORMSDIST to calculate (t). Thus, for the lognormal distribution, S(t ) : 1 9 ([log(t ) 9 4.76458]/0.56053) G G Using the speciﬁc notation of NORMSDIST, ln for log, r : 9ln(1 9 normsdist[ln(t ) 9 4.76458]/0.56053) G G The r ’s so obtained are given in Table 8.4. The next step is to obtain the G Kaplan—Meier estimate of the survival function S(r ), and compute 9log S(r ). G G These values are also given in Table 8.4. Figure 8.13 gives the graph of r versus 9log S (r ), i : 1, . . . , 22. The graph G 0 G is close to a straight line with unit slope and zero intercept. Therefore, a

Figure 8.13 Cox—Snell residual plot for the ﬁtted lognormal model on the tumor-free time data for rats fed with saturated diets.

     

218

Table 8.4 Kaplan--Meier Estimate of Survivorship Function for the Cox--Snell Residuals from the Fitted Lognormal Model on Tumor-Free Time Data for Rats Fed with Saturated Diets t

43 46 56 58 68 75 79 81 86 86 89 96 98 105 107 110 117 124 126 133 142 142 165 170; 200; 200; 200; 200; 200; 200;

r?

S (r)@ 0

9log S (r) 0

0.000 0.037 0.049 0.098 0.110 0.181 0.239 0.275 0.294 0.342 0.342 0.373 0.447 0.469 0.548 0.571 0.606 0.690 0.776 0.800 0.889 1.004 1.004 1.305 1.371; 1.769; 1.769; 1.769; 1.769; 1.769; 1.769;

1.000 0.967 0.933 0.900 0.867 0.833 0.800 0.767 0.733 0.667 0.667 0.633 0.600 0.567 0.533 0.500 0.467 0.433 0.400 0.367 0.333 0.267 0.267 0.233

0.000 0.034 0.069 0.105 0.143 0.182 0.223 0.266 0.310 0.405 0.405 0.457 0.511 0.568 0.629 0.693 0.762 0.836 0.916 1.003 1.099 1.322 1.322 1.455

? r, ordered Cox—Snell residuals from the ﬁtted lognormal model. @S (r), Kaplan—Meier estimate of survivorship function for the 0 Cox—Snell residuals.

lognormal model may be appropriate for the tumor-free times observed. In Chapter 9 (Example 9.2) we will see that the lognormal model was not rejected based on a goodness-of-ﬁt test. Thus the result is consistent with those obtained by using the analytical method. A weakness of the Cox—Snell residual method is that the plot does not indicate the kind of departure the data have from the model selected if the conﬁguration is not linear.



219

Bibliographical Remarks Probability plotting has been widely used since Daniel’s (1959) classical work on the use of half-normal plot. A quite complete and excellent treatment of probability plotting is given by King (1971). Although examples given are applications to industrial reliability, its interpretation of probability plots of many distributions, such as the uniform, lognormal, Weibull, and gamma, are applicable to biomedical research. Recent applications of probability plotting include Leitner et al. (1986), Horner (1987), Waters et al. (1991), and Tsumagari et al. (2000). Hazard plotting was developed by Nelson (1972, 1982). Applications included Gore (1983) and Wurpel et al. (1986). EXERCISES 8.1

Show that the Cox—Snell residuals deﬁned in (8.4.1) follow the unit exponential distribution with density function f (r) : exp(9r).

8.2

Consider the following survival times of 16 patients in weeks: 4, 20, 22, 25, 38, 38, 40, 44, 56, 83, 89, 98, 110, 138, 145, and 27. (a) Does the exponential distribution provide a reasonable ﬁt to the survival data? Use the probability plotting technique. (b) Estimate graphically the parameter of the exponential distribution and consequently, the mean survival time.

8.3

To computerize patients’ records, a data clerk is hired to transcribe medical data from the patients’ charts to computer coding forms. The number of correct entries between errors is listed in chronological order of occurrence over a period of ﬁve days as follows: 73, 12, 40, 65, 100, 15, 70, 40, 110, 64, 200, 6, 90, 102, 20, 102, 90, 34. The assumption is that the data clerk, during the ﬁve days, would not change her error rate appreciably. Use the technique of probability plotting to evaluate the assumption above. What is your conclusion?

8.4

Twenty-ﬁve rats were injected with a give tumor inoculum. Their times, in days, to the development of a tumor of a certain size are given below. 30 38 45 46 50

53 54 58 66 69

77 78 81 84 85

91 95 101 108 115

118 120 125 134 135

Which of the distributions discussed in this chapter provide a reasonable ﬁt to the data? Estimate graphically the parameters of the distribution chosen.

220

     

8.5

In a clinical study, 28 patients with cancer of the head and neck did not respond to chemotherapy. Their survival times in weeks are given below. 1.7 5.1 5.3 6.0 8.3

8.3 9.6 11.3 12.1 12.3

14.0 15.9 16.7 17.0 21.0

22.7 33.0 3.7; 5.0; 5.9;

6.0; 7.4; 8.0; 8.3; 9.1;

13.1; 13.4; 16.1;

(a) Make a hazard plot for each of the following distributions: exponential, Weibull, lognormal, and log-logistic. (b) Which distribution provides a reasonable ﬁt to the data? Estimate graphically the parameters of the distribution chosen. 8.6

Thirty-one patients with advanced melanoma treated with combined chemotherapy, immunotherapy, and hormonal therapy have survival times as given below. 26.3; 94.0 9.1 34.6; 9.4 25.7 88.7

16.1 49.6 27.3 61.9; 46.6; 22.4; 7.1

24.0 77.9 16.6; 3.4 10.9 13.0 64.4;

4.3 97.6; 7.3 75.6; 14.3 56.4 9.1

31.3; 17.6; 16.3

(a) Make a hazard plot for each of the following distributions: exponential, Weibull, lognormal, and log-logistic. (b) Which distribution provides a reasonable ﬁt to the data? Estimate the parameters of the distribution chosen. 8.7

Consider the survival times of the hypernephroma patients in Exercise Table 3.1 (see Exercise 4.5). Make a hazard plot for the distribution you chose in Exercise 6.8. Did you make a good selection? If not, try two other distributions.

8.8

Consider the following survival times in weeks of 10 mice with injection of tumor cells: 5, 16, 18;, 20, 22;, 24;, 25, 30;, 35, 40;. Make an exponential hazard plot. Does the exponential distribution provide a reasonable ﬁt? If not, is the lognormal distribution better?

8.9

Consider the following survival times in months of 25 patients with cancer of the prostate. Use a graphical method to see if the survival time of prostate cancer patients follows the exponential distribution with : 0.01: 2, 19, 19, 25, 30, 35, 40, 45, 45, 48, 60, 62, 69, 89, 90, 110, 145, 160, 9;, 10;, 20;, 40;, 50;, 110;, 130;.

8.10 Make a log-logistic hazard plot of the following data and estimate the two parameters: 20, 30, 32;, 40, 60, 100, 150, 200;, 300.

Statistical Methods for Survival Data Analysis. Elisa T. Lee and John Wenyu Wang Copyright ¶ 2003 John Wiley & Sons, Inc. ISBN: 0-471-36999-7

CHAPTER 9

Tests of Goodness of Fit and Distribution Selection

In Chapter 8 we discuss three graphical methods for checking if a parametric distribution ﬁts the observed data. Parametric distributions can be grouped into families. First, any given distribution with different parameter values forms a family. Second, if a distribution includes other distributions as its special cases, this distribution is a nesting (larger) family of these distributions. For example, the distributions introduced in Chapter 6 belong to more than one nested family. First, the Weibull distribution reduces to the exponential when : 1. Therefore, the exponential distribution is a special case of the Weibull and the two distributions are said to belong to one family, the Weibull family. Second, consider the standard gamma distribution; when : 1, it reduces to the exponential, and when : and : , it becomes the chi-square distribution with degrees of freedom. Thus, the gamma distribution includes the exponential and chi-square as a family. Now let us consider the generalized gamma distribution. It reduces to the exponential if : : 1, the Weibull if : 1, the lognormal if ; -, and the gamma if : 1. Thus, the generalized gamma distribution includes these four distributions and represents a large family of distributions. The relationship of the generalized gamma distribution to the exponential, Weibull, lognormal, and gamma distributions allows us to evaluate the appropriateness of these distributions relative to each other and to a more general distribution. It is known that the generalized gamma distribution is a special case of the generalized F-distribution and therefore belongs to the generalized F family (Kalbﬂeisch and Prentice, 1980) Because of its complexity, we do not cover the generalized F family. In this chapter we discuss several analytical procedures for comparing parametric distributions and assessing goodness of ﬁt. In Section 9.1 we introduce several widely used statistics for testing the appropriateness of a distribution. Readers who are not familiar with linear algebra or are not interested in the mathematical details may skip this section without loss of continuity. In Section 9.2 we discuss statistics for testing whether a distribution 221

222

       

is appropriate by comparing it with other distributions in the same family or a more general family. Section 9.3 covers the selection of a distribution based on Baysian information criteria. Section 9.4 covers the statistics for testing whether a given distribution with known parameters is appropriate. All the test statistics discussed in Sections 9.1 to 9.4 are based on asymptotic likelihood inferences. In Section 9.5 we introduce the test statistic of Hollander and Proschan (1979) for testing whether a distribution with given parameters is appropriate. Computer codes for BMDP or SAS that can be used to carry out the test procedures are provided.

9.1 GOODNESS-OF-FIT TEST STATISTICS BASED ON ASYMPTOTIC LIKELIHOOD INFERENCES We take the exponential distribution as an example to see how to construct statistics to test whether it is appropriate for the observed survival times. As noted in Chapter 6, the Weibull family with : 1, the gamma family with : 1, and the generalized gamma family with : : 1 reduce to the exponential distribution. Therefore, to test if the exponential distribution is appropriate for the observed survival time, we can ﬁrst ﬁt a Weibull distribution and test if : 1, or ﬁt a gamma distribution, then test if : 1, or ﬁt a generalized gamma distribution, then test if : : 1. Similarly, to test whether the family of Weibull distributions, or the gamma distributions, or the lognormal distributions is appropriate for the survival data observed, we can ﬁt a generalized gamma distribution (their nesting distribution) and then test if : 1, or : 1, or with ; -, respectively. Thus, testing the appropriateness of a family of distributions is equivalent to testing whether a subset of the parameters in its nesting distribution equal to some speciﬁc values. If the data can be assumed to follow a certain distribution but the values of its parameters are uncertain, we need to test only that the parameters are equal to certain values. In the following, we separately introduce test statistics for testing whether some of the parameters in a distribution are equal to certain values and whether all parameters in a distribution are equal to certain values. Readers who are interested in a detailed discussion of these statistics are referred to Kalbﬂeisch and Prentice (1980). 9.1.1 Testing a Subset of Parameters in a Distribution Let b : (b , b ) denote all the parameters in a parametric distribution, where b and b are subsets of parameters, and let the hypothesis be H :b :b

(9.1.1)

where b is a vector of speciﬁc numbers. Let b be the MLE of b, b (b ) the MLE of b given b : b , and V (b ) the submatrix of the covariance matrix in

--  

223

(7.1.5), V (b ), corresponding to b . Under H and some mild assumptions, both of the following two statistics have an asymptotic chi-square distribution with degrees of freedom equal to the dimension of (or the number of parameters in) b . Log-likelihood ratio statistic: X : 2[l(b ) 9 l(b (b ), b )] *

(9.1.2)

X : (b 9 b )V \(b )(b 9 b ) 5

(9.1.3)

Wald statistic:

If the number of parameters in b is equal to q, for a given signiﬁcant level , H is rejected if X when the likelihood ratio statistic is used; or if * O? X or X , (two-sided test) or X (one-sided test) O? O\? O? 5 5 5 when the Wald’s statistic is used, where , and are the O? O? O\? 100(1 9 ), 100(1 9 /2), and 100/2 percentile points of the chi-square distribution with q degrees of freedom; that is, P( ) : and P( ) : P( ): O O? O O? O O\? 2 Example 9.1 Suppose that we wish to test whether the observed data are from an exponential distribution. We can use a Weibull distribution and test whether its shape parameter, , is equal to 1. The Weibull distribution has two parameters, and ; thus b : (, ) and the null and alternative hypotheses are: H : : 1 (the underlying distribution is an exponential distribution) (9.1.4) H : " 1 (the underlying distribution is a Weibull distribution) Let b : ( , ) be the MLE of b, l (b ) : l ( , ) and l () be the log-likelihood 5 5 # of the Weibull and exponential distributions, respectively, l () Y l ( (1), 1), # 5 where (1) is the MLE of in the Weibull distribution given : 1. The log-likelihood ratio and Wald statistics deﬁned in (9.1.2) and (9.1.3) in this case become X : 2[l (, ) 9 l ((1), 1)] * 5 5

(9.1.5)

X : ( 9 1)V \( , )( 9 1) 5

(9.1.6)

and

       

224

respectively, where V ( , ) is the second diagonal element of the covariance matrix

V ( , ) :9

and

l ( , ) 5

l ( , ) \ 5

l ( , ) 5

l ( , ) 5

(9.1.7)

[l ( , )/][l ( , )/] 9 (l ( , )/ ) 5 5 5 (9.1.8) V \( , ) :9 l ( , )/ 5 For a given signiﬁcant-level , H is rejected if X , when the likelihood ? * ratio statistic is used; or if X or X , when the Wald ? \? 5 5 statistic is used. It must be pointed out that failure to reject H in (9.1.4) does not imply that an exponential distribution provides the best ﬁt to the data. On the other hand, rejection of H does not indicate that a Weibull distribution is the choice either. Further testing of other distributions is needed. The details and examples are given in Section 9.2. Since the gamma and generalized gamma distribution also include the exponential as a special case, similar test statistics can be constructed to test the null hypothesis that the data are from the exponential distribution by using the gamma, the generalized gamma, or the extended generalized gamma distribution. 9.1.2 Testing All Parameters in a Distribution To test whether all of the parameters in b equal a given set of known values b , the null hypothesis is H :b:b

(9.1.9)

and the following three test statistics can be used. Log-likelihood ratio statistic: X : 2[l(b ) 9 l(b )] *

(9.1.10)

Wald statistic: l(b ) (b 9 b ) X : 9(b 9 b ) 5 b b

l(b ) or : 9(b 9 b ) (b 9 b ) b b

(9.1.11)

       

225

Score statistic: X : 1

l(b ) l(b ) \ l(b ) 9 b b b b

or :

l(b ) l(b ) V (b ) b b

(9.1.12) where V (b ) is the estimated covariance matrix in (7.1.5). Under H and the assumption that b has approximately multinormal distribution, each of the three statistics has an asymptotic chi-square distribution with p (the dimension of b or the number of parameters in b) degrees of freedom. For a given signiﬁcant-level , H is rejected if X , when the N? * likelihood ratio statistic is used; or if X or X , when the N? N\? 5 5 Wald statistic is used; or if X or X , when the score statistic N? N\? 1 1 is used. It must be pointed out that rejection of H in (9.1.9) means only that the given distribution with the known parameters b , not the family of distribu tions to which the given distribution belongs, is not appropriate for the observed data. It is possible that a distribution with different b in the family may be appropriate.

9.2 TESTS FOR APPROPRIATENESS OF A FAMILY OF DISTRIBUTIONS The usual method for testing whether a distribution is appropriate for the observed data is to compare the distribution with a larger or more general family that includes the distribution of interest as a special case (Hagar and Bain, 1970). Let l (), l (, ), l (, ), l ( , ), and l (, , ) denote, respectively, # 5 % *, %% the log-likelihood function deﬁned in (7.1.1) based on the exponential, Weibull, gamma, lognormal, and extended generalized gamma distribution, and l (), # l (, ), l ( , ), l ( , ), and l ( , , ) denote the respective log-likelihood 5 % *, %% values where , (, ), (, ), ( , ), and ( , , ) are the MLE. For example, the log-likelihood of the exponential distribution can be obtained from L P L P l () : log(e9tG) ; log(e9t>G) : r log 9 t 9 t> G G # GP> G GP> G for a set of observed survival times t , . . . , t , t> , . . . , t> . The log-likelihood L P P> value and the estimated covariance matrix in (7.1.5) and parameters for each of the distributions discussed in Sections 7.2 to 7.6 can be obtained from SAS or BMDP. The results can be used to construct the log-likelihood ratio statistic and the Wald statistic deﬁned in (9.1.2) and (9.1.3). In the following, we

226

       

introduce several tests for the appropriateness of a family of distributions based on the log-likelihoods. Construction of the respective Wald statistics is left to the reader as exercises. 1. Testing the hypothesis that the underlying distribution is exponential. The null hypothesis is H : The underlying distribution is an exponential distribution If the Weibull distribution is used, testing the null hypothesis above is equivalent to testing the following null and alternative hypotheses: H : : 1 (the underlying distribution is an exponential distribution) H : " 1 (the underlying distribution is a Weibull distribution) Let (1) be the MLE of in the Weibull distribution given : 1, the log-likelihood ratio statistic is X : 2[l ( , ) 9 l ((1), 1)] * 5 5

(9.2.1)

which has an asymptotic chi-square distribution with 1 degree of freedom. For a given level of signiﬁcance , H is rejected if X . Note that ? * l ((1), 1) Y l (). 5 # Similarly, a log-likelihood ratio statistic can be constructed by using the gamma or the extended generalized gamma distribution. These will be left to the reader as exercises. 2. Testing the hypothesis that the underlying distribution is Weibull. The null hypothesis is H : The underlying distribution is a Weibull distribution We can use the extended generalized gamma distribution and test whether its parameter equals 1. Thus the null and alternative hypotheses can be stated as H : : 1 (the underlying distribution is a Weibull distribution) H : " 1 (the underlying distribution is an extended generalized gamma distribution) Let (1) and (1) be the MLE of and in the extended generalized gamma distribution given : 1. According to Section 6.4, an extended generalized

       

227

gamma distribution with : 1 is a Weibull distribution. The likelihood ratio statistic is X : 2[l ( , , ) 9 l ( (1), (1), 1)] * %% %%

(9.2.2)

which follows asymptotically the chi-square distribution with 1 degree of freedom. H is rejected at a signiﬁcance level of if X . Note that ? * l ( (1), (1), 1) Y l (, ). %% 5 3. Testing the hypothesis that the underlying distribution is standard gamma. The null hypothesis is H : The underlying distribution is a gamma distribution Following the same logic in Section 6.4, the null hypothesis above is equivalent to the following if the extended generalized gamma distribution is used. H : : 1 (the underlying distribution is a standard gamma distribution) H : " 1 (the underlying distribution is a generalized gamma distribution). The likelihood test statistic is X : 2[l ( , , ) 9 l (1, (1), (1))] * %% %%

(9.2.3)

where (1) and (1) are the MLE of and given : 1, which has an asymptotic chi-square distribution with 1 degree of freedom under H . The rejection rule is the same as that for the exponential or Weibull distribution. Note that l (1, (1), (1)) Y l ( , ). %% % 4. Testing the hypothesis that the underlying distribution is lognormal. The null hypothesis is H : the underlying distribution is a lognormal distribution The log-likelihood test statistic is X : 2[l ( , , ) 9 l ( , )] * %% *, which has an asymptotic chi-square distribution with 1 degree of freedom under H . The rejection rule is the same as that for the exponential or Weibull distribution. For the log-logistic and extended generalized gamma distributions, it can be shown that a generalized F-distribution (Kalbﬂeisch and Prentice, 1980) includes the exponential, Weibull, lognormal, gamma, generalized gamma,

228

        Table 9.1 Summary of Goodness-of-Fit Tests for Testing Whether a Family of Models Is Appropriate for the Observed Data? Hypothesized Model Generalized gamma Lognormal Gamma Weibull Exponential Exponential Exponential

LL

X *

df

l %% l *, l % l 5 l # l # l #

2(l 9 l ) %% *, 2(l 9 l ) %% % 2(l 9 l ) %% 5 2(l 9 l ) %% # 2(l 9 l ) % # 2(l 9 l ) 5 #

1 1 1 2 1 1

? LL, log-likelihood; X , likelihood ratio chi-square statistic; df, * degrees of freedom.

extended generalized gamma, and log-logistic distributions as special cases. Therefore, one can follow the same logic to construct either the log-likelihood ratio or the Wald statistic to test the appropriateness of a family of generalized gamma or log-logistic distributions. However, methods for testing the appropriateness of a generalized F-distribution remain unknown. Unless we can ﬁnd a more general distribution that includes the generalized F-distribution as a special case, there is no formal way to check whether the generalized Fdistribution is appropriate. However, the generalized gamma distribution is a rich family and includes a considerable number of distributions. It should be sufﬁcient for most applications. All the tests introduced in this section are summarized in Table 9.1. As pointed out in Section 9.1, when using any of the testing procedures above, failure to reject H does not imply that the hypothesized distribution provides a perfect ﬁt to the data. On the other hand, rejection of H does not mean that the distribution under the alternative hypothesis is the best choice either. In practice, with the help of available computer software, it is easy to ﬁt several distributions simultaneously and then select the most appropriate one, usually the simplest one, as the ﬁnal choice for the data. The following examples illustrate the procedure. Example 9.2 Consider the tumor-free times of the 30 rats that are fed with a saturated diet in Table 3.4. Using SAS, we obtain the MLE of the parameters and the log-likelihoods for the exponential, Weibull, lognormal, and generalized gamma distributions. The results are given in Table 9.2. For example, the MLE of in the exponential distribution is 5.054 and the corresponding log-likelihood is 935.359, and the MLE of the two parameters in the Weibull distribution are : 5.002 and : 0.500 and the corresponding log-likelihood

229

— — 0.500 0.561 0.527 0.332

4.739

BA

5.054 5.054 5.002 4.765 4.495

A@

—

— — — — 91.088

CB

X * 11.922C 19.762D 7.840D 2.326D — —

LL 935.359 935.359 929.398 926.641 925.478 926.867

—

0.001 0.001 0.005 0.127 —

p Value

930.268

— 937.060 932.800 930.042 930.580

BIC

930.867

— 937.359 933.398 930.641 931.478

AIC

? LL, log-likelihood; X , likelihood ratio statistic; p value, P(X X ). * * @A : 9log for the exponential and the extended generalized gamma, :9(1/) log for the Weibull, : for the lognormal, and :9(1/) log for the log-logistic distribution. A B : 1/ for the Weibull and log-logistic, : for the lognormal, and :1/( ) for the extended generalized gamma distribution. B C : 1/ for the extended generalized gamma distribution. CRelative to the Weibull. DRelativew to the extended generalized gamma.

Exponential Exponential Weibull Lognormal Extended generalized gamma Log-logistic

Model

Estimated Parameters

Table 9.2 Goodness-of-Fit Tests Based on Asymptotic Likelihood Inference for the Tumor-Free Time Data from Rats Fed with Saturated Diet in Table 3.4?

230

       

is 929.398. To test the null hypothesis that the underlying distribution is an exponential distribution versus the alternative hypothesis that the underlying distribution is Weibull (or extended generalized gamma), the likelihood ratio test statistic X : 2(35.359929.398) : 11.922 [or 2(35.359 9 25.478) : * 19.762]. The probability of observing such a chi-square value is 0.001; therefore, the exponential distribution is rejected and the Weibull or the generalized gamma is preferred. However, the Weibull distribution is also rejected at the 0.001 level relative to the extended generalized gamma distribution (X : 7.840, p 0.001). This * implies that the extended generalized gamma distribution may be better. However, the extended generalized gamma distribution is not signiﬁcantly better than the lognormal distribution (X : 2.326, p : 0.127). Thus, among * these distributions, the lognormal and extended generalized gamma distributions are our choices. Because of its simplicity, we may select the lognormal distribution as the choice for this set of data. Example 9.3 Table 9.3 contains a set of remission times from 137 cancer patients. These remission times are a subset of the data from a bladder cancer study and are used here only for illustrative purposes. The results of goodness of ﬁt tests based on asymptotic likelihood inferences are shown in Table 9.4. From this table, we see that the exponential distribution is not rejected relative to the Weibull distribution based on the statistic deﬁned in (9.2.1) (X : 0.638, * p : 0.425). The hypothesis that the underlying distribution is exponential versus the alternative hypothesis that the distribution is the extended generalized gamma is rejected (X : 6.772, p : 0.034). Furthermore, the Weibull and * lognormal distributions are also rejected in favor of the extended generalized gamma (X : 6.135, 8.120, p : 0.013 and 0.004, respectively). This implies that * the exponential distribution may not be an appropriate distribution since the Weibull distribution (its nesting distribution) is rejected. Therefore, we may accept the extended generalized gamma as our ﬁnal choice of distribution for the data. 9.3 SELECTION OF A DISTRIBUTION USING BIC OR AIC PROCEDURES The test procedures discussed in Section 9.2 require knowledge of the distribution family to which the distribution of interest belongs. In this section we introduce a simpler selection procedure called the Baysian information criterion (BIC; Schwarz, 1978). This criterion is based on the log-likelihood l(b ), the number of parameters in the distribution (p), and the total number of observations (n). For each candidate distribution, compute p r : l(b ) 9 log n 2

(9.3.1)

     

231

Table 9.3 Remission Times (Months) of 137 Cancer Patients t 4.50 19.13 14.24 7.87 5.49 2.02 9.22 3.82 26.31 4.65; 2.62 0.90 21.73 0.87; 0.51 3.36 43.01 0.81 3.36 1.46 24.80; 10.86; 17.14 15.96 7.28 4.33 22.69 2.46 3.48 4.23 6.54 8.65 5.41 2.23 4.34

t

t

32.15 4.87 5.71 7.59 3.02 4.51 1.05 9.47 79.05 2.02 4.26 11.25 10.34 10.66 12.03 2.64 14.76 1.19 8.66 14.83 5.62 18.10 25.74 17.36 1.35 9.02 6.94 7.26 4.70; 3.70 3.64 3.57 11.64 6.25 25.82

3.88 3.02; 19.36; 20.28 46.12 5.17 0.20 36.66 10.06 4.98 5.06 16.62 12.07 6.97 0.08 1.40 2.75 7.32 1.26 6.76 8.60; 7.62 3.52 9.74 0.40 5.41 2.54 2.69 8.26 0.50 5.32 5.09 2.09 7.93 12.02

t 13.80 5.85 7.09 5.32 4.33; 2.83 8.37 14.77 8.53 11.98 1.76 4.40 34.26 2.07 17.12 12.63 7.66 4.18 13.29 23.63 3.25 7.63 2.87 3.31 2.26 2.69 11.79 5.34 6.93 10.75 13.11 7.39

where b denotes the MLE of all the parameters in the distribution. The candidate distribution with the largest r value is the distribution that ﬁts the data the best. It has been shown that for some distribution families and under mild assumptions, for sufﬁciently large n, the distribution selected by the BIC procedure approaches the true underlying distribution, if it exists.

232 — — 0.949 1.090 0.999 0.591

1.866

BA

2.303 2.303 2.322 1.821 2.087

A@

—

— — — — 0.520

CB

X * 0.638C 6.772D 6.134D 8.120D — —

LL 9198.234 9198.234 9197.915 9198.908 9194.848 9195.344

? LL, log-likelihood; X , likelihood ratio statistic; p value, P(X X ). * * @AB See the footnotes in Table 9.2. CRelative to the Weibull. DRelative to the extended generalized gamma.

Exponential Exponential Weibull Lognormal Extended generalized gamma Log-logistic

Model

Estimated Parameters

—

0.425 0.034 0.013 0.004 —

p Value

BIC

9200.264

— 9200.694 9202.835 9203.828 9202.228

Table 9.4 Goodness-of-Fit Tests Based on Asymptotic Likelihood Inference for Data in Table 9.3?

9199.344

— 9200.234 9201.915 9202.908 9200.848

AIC

       

233

In general, the larger the number of parameters p in a distribution, the larger the log-likelihood l(b ) in (9.3.1). Thus the ﬁrst term represents the gain by using a distribution with more parameters. But the larger the p, the larger the second term in (9.3.1) is, which represents a penalty by having more parameters in the distribution. Therefore, the BIC provides a balance between the gain and the penalty. Another widely used criterion is called an information criterion (AIC; Akaike, 1969), in which r is deﬁned as r : l(b ) 9 2p

(9.3.2)

Example 9.4 The values of the BIC and AIC for the various distributions considered in Examples 9.2 and 9.3 are listed in the last two columns in Tables 9.2 and 9.4. Based on Table 9.2, the lognormal distribution would be selected by either the BIC or AIC procedure, which is consistent with the results obtained in Example 9.2. The results in Table 9.4 show that the log-logistic distribution, rather than the extended generalized gamma distribution, should be selected based on either the BIC or AIC procedure.

9.4 TESTS FOR A SPECIFIC DISTRIBUTION WITH KNOWN PARAMETERS In this section we introduce the likelihood ratio statistic for testing if the survival data observed follow a given distribution with known parameters. We use the same notations as in Section 9.2. In addition to the exponential, Weibull, lognormal, gamma, generalized gamma distributions, we also consider the log-logistic distribution. Let l (, ) and l ( , ) denote its log-likelihood ** ** function and the log-likelihood with ( , ), the MLE of (, ). 1. Testing the hypothesis that the underlying distribution is exponential with known parameter . The null hypothesis is H : the underlying distribution is the exponential distribution with : The likelihood ratio test statistic based on (9.1.10) is X : 2[l ( ) 9 l ( )] * # #

(9.4.1)

X has an asymptotic chi-square distribution with 1 degree of freedom under * H . H is rejected if X X , where is the signiﬁcance level. Similarly, the ? * Wald test statistic and the score statistic can be derived by following (9.1.11) and (9.1.12). This is left to the reader as exercises. Example 9.5 Consider the following survival times in weeks of 10 mice with a given tumor: 1, 3, 5, 8, 10;, 15, 18, 19, 22, 25;. We test the following

       

234 null hypothesis:

H : the underlying distribution of the observed data is exponential with : 0.06 In this case, n : 10, r : 8, P t : 91, and L t> : 35. The MLE of G G GP> G based on (7.2.16) is :

8 : 0.0635 91 ; 35

and l ( ) : 8(log 0.0635) 9 0.0635(91) 9 0.0635(35) : 930.055. Under H , # l ( ) : 8(log 0.06) 9 0.06(91) 9 0.06(35) : 930.067. Thus, following (9.4.1), # X : 2[930.055 9 (930.067)] : 0.024. X : 3.84; therefore, we cannot * reject the null hypothesis that the data are from the exponential distribution with : 0.06. 2. Testing the hypothesis that the underlying distribution is Weibull with known parameters and . The null hypothesis is H : the underlying distribution is Weibull with known parameters : and : Based on (9.1.10), the likelihood ratio test statistic is X : 2[l ( , ) 9 l ( , )] * 5 5

(9.4.2)

Under H , X has an asymptotic chi-square distribution with 2 degrees of * freedom. H is rejected if X X where is the signiﬁcance level. ? * 3. Testing the hypothesis that the underlying distribution is lognormal with known parameters and . Similar to the procedures above, the likelihood ratio test statistic is X : 2[l ( , ) 9 l ( , )] * *, *,

(9.4.3)

Under H , X has an asymptotic chi-square distribution with 2 degrees of * freedom. 4. Testing the hypothesis that the underlying distribution is standard gamma with known parameters and . The likelihood ratio test statistic is X : 2[l ( , ) 9 l ( , )] * % %

(9.4.4)

Under H , X is asymptotically chi-square distributed with 2 degrees of * freedom.

       

235

5. Testing the hypothesis that the underlying distribution is generalized gamma with known parameters , , and . The likelihood ratio test statistic is X : 2[l ( , , ) 9 l ( , , )] * %% %%

(9.4.5)

Under H , X is asymptotically chi-square distributed with 3 degrees of * freedom. 6. Testing the hypothesis that the underlying distribution is log-logistic with known parameters and . The likelihood ratio test statistic is X : 2[l ( , ) 9 l ( , )] * ** **

(9.4.6)

Under H , X has an asymptotic chi-square distribution with 2 degrees of * freedom. Note that the respective Wald and score statistics can be constructed for these tests by following (9.1.11) and (9.1.12). These are left to the reader as exercises. As noted in Section 9.3, the log-likelihood and estimated covariance matrix and parameters in (9.1.10)—(9.1.12) for each of the distributions discussed in Sections 7.2 to 7.6 can be obtained from SAS or BMDP. The other terms in these test statistics can also be obtained by using SAS or BMDP. The following example illustrates the use of SAS and BMDP. Example 9.6 To use the likelihood ratio statistic (9.4.1) to test the null hypothesis in Example 9.5, H : : : 0.06, we need to calculate the log-likelihood l ( ) and l ( ). l ( ) can be obtained by applying either the # # # SAS or BMDP codes in Example 7.5. We now show how to use SAS or BMDP to calculate l ( ). Suppose that the survival data of the 10 mice in Example # 9.5 are saved in the ﬁle ‘‘C:EXAMPLE.DAT’’. If SAS is used, we specify that the distribution is exponential by using D : EXPONENTIAL in the ‘‘model’’ statement and letting INTERCEPT : 2.813 [: 9 log : 9log(0.06)]. If BMDP is used, we specify the distribution by letting ACCEL : EXPONENTIAL and CONSTANT : 2.813. The following SAS or BMDP codes can be used to obtain the l ( ) and the terms needed for the # Wald and score statistics in (9.1.11) and (9.1.12). SAS code: data w1; inﬁle ‘c:example.dat’ missover; input t cens; run; proc lifereg; model t*cens(0):/maxit:0 covb itprint d:exponential intercept:2.813; run;

       

236 BMDP code: /input /print /variable /form /regress

ﬁle : ‘c:example.dat’ . variables : 2. format : free. level : brief. cova. iterations. names : t, cens. time : t. status : cens. response : 1. iteration : 0. accel : exponential. constant : 2.813.

/end Similarly, to obtain the log-likelihood ratio statistic, the Wald and the score statistics in (9.1.10)—(9.1.12) for testing null hypotheses about the parameters of other distributions, we can follow the same procedure but change the D: and ACCEL: statements to reﬂect the distribution under the null hypothesis. We also need to provide values for the input variables INTERCEPT and SCALE, for Weibull, lognormal, and log-logistic distributions, if SAS is used. For the extended generalized gamma distribution, we need to provide a value for SHAPE1. BMDP does not have a procedure for the gamma distribution. For the Weibull, lognormal, and log-logistic distributions, we need to provide values for CONSTANT and SCALE. All of these input variables are based on the distribution and their relationship to the parameters under the null hypothesis (see notes at the end of each of the SAS or BMDP codes in Section 7.2 to 7.6).

9.5 HOLLANDER AND PROSCHAN’S TEST FOR APPROPRIATENESS OF A GIVEN DISTRIBUTION WITH KNOWN PARAMETERS Another test for the appropriateness of a parametric distribution with known parameters was proposed by Hollander and Proschan (1979). Let 0 : t t t % t be a set of distinct ordered survival times and L some of the t ’s may be censored. If censored observations are tied with G uncensored observations, treat the censored observations of tie as being greater than the uncensored of the tie. Let S(t) be the underlying survivorship function and S (t) the survivorship function of the speciﬁc distribution. The null hypothesis is H : S(t) : S (t)

  ’ 

237

Using the Kaplan—Meier product-limit method, S(t) is estimated as

I\ S (t) : H

n 9 j BH n9j;1

t

I\

t t , k : 1, . . . , n I

(9.5.1)

tt L

0

where : 1 if t is uncensored and : 0 if t is censored. Hollander and H H H H Proschan’s test statistic for the null hypothesis that the data are from a distribution with survivorship function S(t) is C:

S (t ) f (t ) G G

(9.5.2)

where f (t ) is the jump of the Kaplan—Meier estimates at consecutive G uncensored observation and at the largest observation, uncensored or not,

1 G\ n 9 j ; 1 \BH f (t ) : . G n n9j H

(9.5.3)

Under the null hypothesis, C* :

(n(C 9 0.5)

(9.5.4)

follows approximately the standard normal distribution, where is an estimate of the standard deviation of C and

:

1 L n [S(t ) 9 S(t )] G 16 n 9 i ; 1 G\ G

(9.5.5)

To test H : S : S versus H : S S , we reject H if C* 9Z ; to test H ? versus H : S S , we reject H if C* Z ; and to test H versus H : S " S , ? we reject H if C* 9Z or C* Z , where Z is the upper percentile ? ? ? point of the standard normal distribution. The procedure for the calculation of C* can be summarized as follows. 1. Compute the Kaplan—Meier estimate S (t) for each uncensored observation. 2. Compute the jump of the Kaplan—Meier distribution at each t uncenG sored, that is, f (t ), which is the difference of F (t) : 1 9 S (t) at two G consecutive uncensored observations. 3. Compute S (t ) for each observation. G

238

       

4. Multiply S (t ) by f (t ) and sum over all uncensored t ’s to obtain C. G G G 5. Compute according to (9.5.5) and consequently, C* according to (9.5.4). Example 9.7 Consider the survival times in weeks of 10 mice in Example 9.5: 8, 5, 10;, 1, 3, 18, 22, 15, 25;, and 19. We wish to test that the survival time follows an exponential distribution with : 0.06. The null and alternative hypotheses are H : S(t) : S (t) H : S(t) " S (t) where S (t) : exp(90.06t). Following the procedure outlined above, we ﬁrst arrange the observations in ascending order and compute the Kaplan—Meier estimates as shown in column (d) of Table 9.5. The jumps are given in column (e). For example, the ﬁrst jump is between S (0) and S (1) or 1 9 0.9 : 0.1. Column (f) gives the survival function under the null hypothesis, for example, S (3) : exp(90.06;3) : 0.835. Following (9.5.2), column (g) gives the value of C : 0.4808. The last three columns are for calculation of the estimated variance of C. Thus,

:

1 (1.3166) : 0.0823 16

and C* :

(10(0.4808 9 0.5) (0.0823

: 90.2116

For : 0.05, Z : 1.96, C* does not fall in the rejection region. From Table ? B-1 we obtain that the p value corresponding to C* : 90.2116 is approximately 0.84. Therefore, we conclude that there is insufﬁcient evidence to say that the data are not from an exponential distribution with : 0.06. Figure 9.1, which plots the Kaplan—Meier estimates and the hypothesized theoretical distribution S (t) : exp(90.06t), demonstrates a close agreement between the two. The result is consistent with that obtained in Example 9.5, where the likelihood ratio test is used. Bibliographical Remarks Readers with a background in mathematical statistics and an interest in mathematical details about asymptotic likelihood theory, likelihood ratio, Wald’s, and score statistics are referred to Cox (1961, 1962a), Atkinson (1970), Hagar and Bain (1970), Cox and Hinkley (1974), and Kalbﬂeisch and Prentice

239

i

1 2 3 4 5 6 7 8 9 10

t G

1 3 5 8 10; 15 18 19 22 25;

0.900 0.889 0.875 0.857 — 0.800 0.750 0.667 0.500 —

(c) n9i n9i;1

? S(t ) : S(0) : 1.

(b)

(a)

0.100 0.100 0.100 0.100 0 0.120 0.120 0.120 0.120 0

f (t ) G

S (t)

0.900 0.800 0.700 0.600 — 0.480 0.360 0.240 0.120 —

(e)

(d)

0.941 0.835 0.741 0.619 0.549 0.407 0.340 0.320 0.267 0.223

S (t ) G

(f )

0.0941 0.0835 0.0741 0.0619 0 0.0560 0.0408 0.0384 0.0320 0 ——— 0.4808

(e) ; (f)

(g)

Table 9.5 Calculation of Test Statistic C* for Data in Example 9.7

0.2159? 0.2980 0.1846 0.1547 0.0560 0.0634 0.0140 0.0029 0.0054 0.0026

S(t ) 9 S(t ) G\ G

S(t ) G 0.7841 0.4861 0.3015 0.1468 0.0908 0.0274 0.0134 0.0105 0.0051 0.0025

(i)

(h)

0.2159 0.3311 0.2308 0.2210 0.0933 0.1268 0.0350 0.0097 0.0270 0.0260 ——— 1.3166

( j) n ;(i) n9i;1

       

240

Figure 9.1 Kaplan—Meier estimator S (t) and the hypothesized survival function S (t) : exp(90.06t).

(1980). There have been many papers about the AIC and BIC criteria in the literature since the introduction of AIC by Akaike (1969). The asymptotic properties of the two criteria and their relationships with other criteria were discussed by Akaike (1974), Parzen (1974), Schwarz (1978), Hannan (1979), Shibata (1980), Wang (1984, 1989), Rissanen (1986), and Wei (1992). Interested readers are referred to these papers for details. When there are no censored observations, the chi-square goodness of ﬁt test introduced by Karl Pearson in 1900 can be used to test any distributional assumption. In addition, tests for the exponential and lognormal (Shapiro and Wilk, 1965a, b) are available.

EXERCISES 9.1

Derive the likelihood ratio and Wald test statistics following (9.1.2) and (9.1.3) for the following null hypothesis: H : The underlying distribution is exponential versus the alternatives (a) H : The underlying distribution is gamma (b) H : The underlying distribution is generalized gamma

 9.2

241

Derive the Wald test statistics following (9.1.3) for the following null and alternative hypotheses H : The underlying distribution is Weibull H : The underlying distribution is generalized gamma

9.3

Derive the respective Wald test statistics by following (9.1.3) for the null hypothesis that the distribution is the standard gamma versus the alternative hypothesis that the distribution is the generalized gamma.

9.4

Derive the Wald and score statistics for testing the null hypotheses in Section 9.4 by following (9.1.11) and (9.1.12).

9.5

Consider the survival time of 28 cancer patients in Exercise 8.5. (a) Obtain the log-likelihoods for the exponential, Weibull, lognormal, and generalized gamma distributions. Perform the likelihood ratio test and select the best distribution among these four distributions. (b) Use the BIC and AIC procedures to select the best distribution among the four distributions in part (a) plus the log-logistic distribution. (c) Compare the results obtained in parts (a) and (b) and those obtained in Exercise 8.5.

9.6

Consider the survival time of 31 patients with advanced melanoma in Exercise 8.6. (a) Select the best distribution using the likelihood ratio, Wald, and score statistics among the exponential, Weibull, gamma, lognormal, and generalized gamma distributions. (b) Use the BIC and AIC procedures to do the same as in part (a) with the addition of the log-logistic distribution. (c) Compare the results obtained in parts (a) and (b) and those obtained in Exercise 8.6. (d) Compare the MLE of the parameters with those estimates obtained by using the graphical methods in Exercise 8.6.

9.7

Do the same as in Exercise 9.5 for the data in Exercise Table 3.1.

9.8

Consider the following survival time in weeks of 10 mice with injection of tumor cells: 5, 16, 18;, 20, 22;, 24;, 25, 30;, 35, 40;. Do the data follow the exponential distribution with : 0.02? (a) Use the likelihood ratio test. (b) Use Hollander and Proschan’s test statistic. (c) Plot the Kaplan—Meier estimator of S(t) and the hypothesized distribution.

242

       

9.9

Consider the following survival time in months of 25 patients with cancer of the prostate. Test the hypothesis that the survival time of prostate cancer patients follows the exponential distribution with : 0.01: 2, 19, 19, 25, 30, 35, 40, 45, 45, 48, 60, 62, 69, 89, 90, 110, 145, 160, 9;, 10;, 20;, 40;, 50;, 110;, 130;.

9.10 The Gompertz distribution belongs to the Gompertz—Makeham distribution family and the Gompertz—Makeham distribution (Makeham, 1860) has the following hazard function: h(t) : ; exp( ; t)

0

Construct a likelihood ratio statistic and Wald’s statistic to test the appropriateness of a Gompertz distribution.

Statistical Methods for Survival Data Analysis. Elisa T. Lee and John Wenyu Wang Copyright ¶ 2003 John Wiley & Sons, Inc. ISBN: 0-471-36999-7

C H A P T E R 10

Parametric Methods for Comparing Two Survival Distributions

In Chapter 5 we discussed several nonparametric tests for comparing two survival distributions. If the distributions follow a known model, parametric tests are more powerful than nonparametric tests, but their computation is more tedious. In this chapter we ﬁrst discuss the likelihood ratio test in general for comparing two survival distributions in Section 10.1. Readers who are not familiar with linear algebra may skip this section without loss of continuity. In Sections 10.2 to 10.4 we present either the likelihood ratio test or other tests for the comparison of two survival patterns that follow the exponential, Weibull, and gamma distributions.

10.1 LIKELIHOOD RATIO TEST FOR COMPARING TWO SURVIVAL DISTRIBUTIONS Let x , . . . , x , and y , . . . , y be the observed exact or censored survival times L L of n and n subjects from two groups. Assume that the survival times from the two groups follow the same distribution with different parameters. We use the general notation b : (b , b , . . . , b ) to denote the set of parameters of the N distribution, p 1. Let l (b ), i : 1, 2, denote the log-likelihood function for the G G observed survival times from each group, where b : (b , . . . , b , G G GI b , . . . , b ) : (b , b ), and b : (b , . . . , b ) and b : (b , . . . , b ) are GI> GN G G G G GI G GI> GN two subsets of the p parameters, i : 1, 2. Then the joint log-likelihood function for the two groups is l(b , b ) : l (b ) ; l (b ). Let b denote the MLE of b , G G and b (b ) denote the MLE of b given b : b , where b is known. G G G For example, if the survival time of the two groups follows the Weibull distribution with a scale parameter and a shape parameter . Then p : 2, b : ( , ), and b : ( , ), where , and , are the respective parameters in the two Weibull distributions. Let l ( , ) and l ( , ) denote the log-likelihood functions of the observed survival times from two groups; 243

244

      

then the joint log-likelihood function for the two groups is l( , , , ) : l ( , ) ; l ( , ) In this case, b may be a singleton , and similarly, b may be . G G G G The following tests are widely used in comparing two survival distributions. Case 1. All parameters are unknown. When b , i : 1, 2, are unknown, we G test the hypothesis H :b :b :b

(10.1.1)

that is, that the two groups have the same survival distribution with equal but unknown parameters b. The log-likelihood ratio test statistic X : 92[l(b , b ) 9 l(b , b )] * : 2[l (b ) ; l (b ) 9 l(b , b )]

(10.1.2)

has an asymptotic chi-square distribution with p degrees of freedom. For a given signiﬁcance level , H is rejected if X N? *

(10.1.3)

P( X ) N *

(10.1.4)

or equivalently, if

where denotes the chi-square random variable with p degrees of freedom, N and is its 100(1 9 ) percentile points, P( ) : . N? N N? In the case of comparing two Weibull distributions, it reduces to H : : : and : : where and are unknown, X : 2[l ( , ) ; l ( , ) 9 l( , , , )] * and H is rejected if X , or equivalently, if P( X ) . ? * * Case 2. A subset of the parameters of the two survival distributions are known and equal, say, b : b : b , where the values of b are known. The null hypothesis is the equality of the remaining parameters, or H :b :b :b

(10.1.5)

       

245

where b is unknown. The log-likelihood ratio statistic is X : 2[l (b , b (b )) ; l (b , b (b )) 9 l((b , b (b )), (b , b (b ))] * (10.1.6) where b (b ) is the MLE of b given b : b , and so are the others. X has * an asymptotic chi-square distribution with degrees of freedom equal to the number of parameters in b (or b ). In the case of comparing two Weibull distributions, we may assume that : : (or : : ), where the value of (or ) is known, and test the null hypothesis H : : : (or : : ) Then X : 2[l ( , ( )) ; l ( , ( )) 9 l( , ( ), , ( ))] * (or X : 2[l ( ( ), ) ; l ( ( ), ) 9 l( ( ), , ( ), )] * and H is rejected if X , equivalently, if P( X ) . ? * * Case 3. A subset of the parameters of the two survival distributions are equal but unknown, say, if b : b : b and the values of b are unknown. The null hypothesis is the equality of the remaining parameters, or H :b :b :b

(10.1.7)

where b is unknown and needs to be estimated. In addition, b also needs to be estimated. The log-likelihood ratio statistic, X : 2[l((b , b ), (b , b )) 9 l(b , b )] *

(10.1.8)

has an asymptotic chi-square distribution with degrees of freedom equal to the number of parameters in b (or b ). For the case of comparing two Weibull distributions, the derivation of X * in (10.1.8) is left to the reader as an exercise. Case 4. A subset of the parameters of the two survival distributions are known but not equal, say, if b : b , b : b , and b and b are known

246

      

but b " b . The null hypothesis is the equality of the remaining parameters, or H :b :b :b

(10.1.9)

The log-likelihood ratio statistic X : 2[l (b , b (b )) ; l (b , b (b )) * 9 l((b , b (b , b )), (b , b (b , b )))]

(10.1.10)

has an asymptotic chi-square distribution with degrees of freedom equal to the number of parameters in b or b . For the case of comparing two Weibull distributions, the derivation of X * in (10.1.10) is left to the reader as an exercise.

10.2 COMPARISON OF TWO EXPONENTIAL DISTRIBUTIONS Suppose that two survival distributions follow the exponential model with parameters and , respectively. Two tests can compare the distributions: the likelihood ratio test and an F-test suggested by Cox (1953). These two tests can test the hypothesis that the two exponential distributions are equal whether or not the samples include censored observations. 10.2.1 Likelihood Ratio Test Suppose that there are n and n individuals in groups 1 and 2, respectively, x , . . . , x uncensored and x> , . . . , x> censored in group 1, and y , . . . , y L P> P P group 2. Thus, in group 1, there are uncensored and y> , . . . , y> censored in L P> r uncensored and n 9 r censored observations. In group 2, there are r uncensored and n 9 r censored observations. If it is known that the survival times of the two groups follow the exponential distribution with density function f (t) : e\HG R, i : 1, 2, testing the equality of two exponential distribuG G tions is equivalent to testing the hypothesis H : : . This is because the two exponential distributions are characterized by the two parameters and . Thus, the null hypothesis is H : : : and the alternative hypothesis is H : " . According to (10.1.2), the test statistic for the likelihood ratio test is L ( , ) X : 92 log * L ( , )

(10.2.1)

    

247

where the denominator is the likelihood function for the two groups combined,

L ( , ) : PP exp 9 9

P L

x ; x> G G G GP>

P L

y ; y> G G G GP>

(10.2.2)

and and are the MLE of and , respectively, from groups 1 and 2. From Section 7.2, r : P x ; L x> G G GP> G

r : P y ; L y> G G GP> G

(10.2.3)

The numerator in (10.2.1) is the likelihood function for the combined sample under the null hypothesis, that is, : : ,

L ( , ) : P>P exp 9

P P L L

x ; x> ; y ;

G G G G GP> G GP>

(10.2.4) where is the MLE of obtained from the combined sample, :

r ;r P L

x ;

x> ; P y ; L y> G G GP> G G G GP> G

(10.2.5)

From Section 10.1, X has an approximate chi-square distribution with 1 * degree of freedom for samples of at least 25 (n ; n 25) under the null hypothesis. For a given signiﬁcance level , H is rejected if X , or ? * equivalently, if P( X ) . * The test procedure can be summarized as follows: 1. Compute and following (10.2.3). 2. Compute L ( , ) in (10.2.2) using the given data and and obtained in step 1. 3. Compute following (10.2.5). 4. Compute L ( , ) in (10.2.4). 5. Compute X in (10.2.1). If X (Table B-2), reject H and conclude ? * * that the two exponential survival distributions are not equal. Otherwise, the data do not provide enough evidence to reject the null hypothesis. If there are no censored observations in the data, (10.2.1)—(10.2.5) are also applicable simply be letting n : r , n : r and omitting the terms involving

248

      

x> and y>. The likelihood ratio test is primarily for two-sided tests and is G G difﬁcult to apply to a one-sided test. It is approximate and should be used with caution when the sample size is small. The power of the test, similar to that of other likelihood tests, is not high. That is, if the likelihood ratio test is used regularly, one is more likely not to reject the null hypothesis when the two survival distributions are not equal. Example 10.1 Consider the remission data of the two treatment groups given in Example 5.1. The remission times in months are as follows: CMF:

23, 16;, 18;, 20;, 24;

Control:

15, 18, 19, 19, 20

Assume that the two distributions are exponential with parameters and , respectively. Using the likelihood ratio test, we test the following null hypothesis H : : : (the two treatments are equally effective) against H : " (the two treatments are not equally effective) Following the above, we proceed as follows: 1. Compute and in (10.2.3): In this case, n : n : 5, r : 1, r : 5, >

P x : 23, L x> : 78, P y : 91, L y : 0, G G GP> G G G GP> G 1 1 : : : 0.0099 23 ; 78 101 5 : : 0.0549 91 2. Compute L ( , ) in (10.2.2): L ( , ) : (0.0099)(0.0549) exp[90.0099(101) 9 0.0549(91)] : 1.2290(10)\ 3. Compute in (10.2.5): :

6 1;5 : : 0.0313 23 ; 78 ; 91 192

    

249

4. Compute L ( , ) in (10.2.4): L ( , ) : (0.0313) exp[90.0313(192)] : 2.3085(10)\ 5. Compute X in (10.2.1): * 2.3085(10)\ : 92 log(0.1878) : 3.344 X : 92 log * 1.2290(10)\ From Table B-2 we obtain : 3.84. Thus we cannot reject H at the 0.05 level. Recall that in Chapter 5 the null hypothesis was rejected at the 0.05 level by using the four nonparametric tests. 10.2.2 Cox’s F-Test for Exponential Distributions If the times to failure can be assumed to follow the exponential distribution in both treatment groups, an F-test suggested by Cox (1953) can be used to test for treatment differences whether or not censored observations are present. Suppose that we wish to test the hypothesis H : : against either the one-sided alternative H : (or H : ) or the two-sided alternative H : " . An efﬁcient test is to take t /t as having an F-distribution with (2r , 2r ) degrees of freedom, where

P x ; L x> GP> G t : G G r

P y ; L y> GP> G t : G G r

(10.2.6) (10.2.7)

The test procedures are (1) for H , reject H if t /t F ; (2) for H , PP? reject H if t /t F ; and (3) for H , reject H if t /t F or PP\? PP? t /t F , where is the signiﬁcance level and F is the upper PP\? PP? 100 percentage point of the F-distribution with (2r , 2r ) degrees of freedom. Similarly, the hypothesis that / : k can be tested by referring kt /t to the table of the F-distribution. When there are no censored observations, that is, n : r , n : r , the second terms of the numerators in (10.2.6) and (10.2.7) are zero. Then the test statistic t /t has an F-distribution with (2n , 2n ) degrees of freedom. Conﬁdence intervals for the ratio / can be obtained from the fact that t / t has the F-distribution with (2n , 2n ) degrees of freedom. It follows that a 100(1 9 )% conﬁdence interval for the ratio of two hazard rates / is t t F F PP\? PP? t t

(10.2.8)

250

      

Example 10.2 Thirty-six patients with glioblastoma multiforme were divided into two groups; the experimental group contained 21 patients who had surgery and chemotherapy, and the control group contained 15 patients who had surgery only. The survival times in weeks are available about one year after the start of the study (Burdette and Gerhan, 1970): Experimental: 1, 2, 2, 2, 6, 8, 8, 9, 13, 16, 17, 29, 34, 2;,9;, 13;, 22;, 25;, 36;, 43;, 45; Control:

0, 2, 5, 7, 12, 42, 46, 54, 7;, 11;, 19;, 22;, 30;, 35;, 39;

The hypotheses are H : : (no difference in survival between experimental and control groups) H : (difference in survival favoring experimental group) In this case, n : 21, n : 15, r : 13, r : 8, x : 147, x> : 195, G G y : 168, and y> : 163. Hence G G t :

147 ; 195 : 26.308 13

t :

168 ; 163 : 41.375 8

and t /t : 0.636 with (26,16) degrees of freedom. For : 0.05, F is approximately 2.23; hence the hypothesis H is not rejected and the data do not provide enough evidence that the survival time is longer in the experimental group. A 95% conﬁdence interval for the ratio / is 41.375 41.375 (0.419) (2.625) 26.308 26.308 or (0.659, 4.128). The estimate of / according to (10.2.3) is 1.58. Hence the data show that the death rate per week of the experimental group is close to that of the control group. In Example 10.2, the guarantee time in both groups is zero. In the case where a group has a nonzero guarantee time, it can be subtracted from every observation in the group and the test then applied. Monte Carlo studies (Gehan and Thomas, 1969; Lee et al., 1975) show that when samples are from exponential distributions, with or without censoring, the F-test is the most powerful test among the parametric or nonparametric tests discussed in this chapter and Chapter 5.

    

251

10.3 COMPARISON OF TWO WEIBULL DISTRIBUTIONS It is well known that if the survival time T has a Weibull distribution with shape parameter , then T A has an exponential distribution. Thus, if and for the two groups are known, the most powerful Cox’s F-test described in Section 10.2 can be applied to the transformed observations. However, in practice, and are probably unknown, and so are the scale parameters, and . In this case, the likelihood ratio tests described in Section 10.1 can be applied to test whether the observed survival times from the two groups have the same Weibull distribution. To test the equality of two Weibull distributions, it sufﬁces to test : and : . If the hypothesis : is rejected, we need not test the hypothesis : . If the hypothesis : is not rejected, we do need to test : . In the following, we introduce an additional two-sample test proposed by Thoman and Bain (1969) for uncensored samples. Assume that independent random samples of equal size (n : n : n) are obtained from Weibull distributions f (t) and f (t), where f (t) : ( t)AG\ exp[9( t)AG] G G G G G

i : 1, 2

(10.3.1)

To test : , we use the property of the maximum likelihood estimator (Thoman et al., 1969; Thoman and Bain, 1969). To test the null hypothesis H : : against H : , we use the fact that ( / )/( / ) : / under H . The percentage points of / are given in Table B-12. We compute the MLE of and , that is, and , and compare / with the percentage points for a given in Table B-12. Reject H at level if / l . For ? example, if n : n : n : 10, a computed / 1.897 would lead to rejection of H at a signiﬁcance level of 0.05. For 0.50, percentage points l can be ? calculated by using the relationship l : 1/l . ? \? The procedure described above can be generalized to test H : : k against H : : k . For the case when k k , the rejection region becomes / kl , where is the signiﬁcance level. ? If the hypothesis H : : is rejected, the two Weibull distributions are not the same. However, if the hypothesis is not rejected, we need to test the equality of the two scale parameters and . A test of H : : against H : suggested by Thoman and Bain (1969) rejects H if G : ( ; )(log 9 log ) z ?

(10.3.2)

where z is such that P(G z H ) : 1 9 and , , , and are the MLEs ? ? of , , , and respectively. The percentage points z are given in Table ? B-13. For example, if the common sample size is 10, the hypothesis H : : is rejected if G 0.918 at signiﬁcance level 0.05. A test of H : : against H : can be constructed in a similar fashion. The critical points z can ? be obtained from Table B-13 by using the fact that z : 9z . ? \?

252

      

Table 10.1 Survival Times of Patients in Two Treatment Groups Treatment 1 5, 10, 17, 32, 32, 33, 34, 36, 43, 44, 44, 48, 48, 61, 64, 65, 65, 66, 67, 68, 82, 85, 90, 92, 92, 102, 103, 106, 107, 114, 114, 116, 117, 124, 139, 142, 143, 151, 158, 195

Treatment 2 20.9, 32.2, 33.2, 39.4, 40.0, 46.8, 57.3, 58.0, 59.7, 61.1, 61.4, 54.3, 66.0, 66.3, 67.4, 68.5, 69.9, 72.4, 73.0, 73.2, 88.7, 89.3, 91.6, 93.1 94.2, 97.7, 101.6, 101.9, 107.6, 108.0, 109.7, 110.8, 114.1, 117.5, 119.2, 120.3, 133.0, 133.8, 163.3, 165.1

Example 10.3 illustrates the test procedures. The data are adapted and modiﬁed from Harter and Moore (1965). Forty observations are generated from a Weibull distribution with : 0.01 and : 2 and another 40 from a Weibull distribution with : 0.01 and : 3. The resulting data are shown in Table 10.1. For illustrative purposes, we consider the two samples as two treatment groups. Example 10.3 Consider the survival times of the patients in the two treatment groups in Table 10.1. The null hypothesis is that the two populations have the same shape parameter; that is, H : : against H : . The MLEs are : 1.945, : 2.715, and hence / : 1.396, which is signiﬁcant at the 0.05 level (l : 1.342 for n : 40) but not signiﬁcant at the 0.02 level (l : 1.453 for n : 40). If we choose : 0.05 and reject H , the decision is correct. An error of not rejecting H would be committed if an of 0.02 or 0.01 is chosen. This is because the two shape parameters are very close ( : 2, : 3). To illustrate the procedure of testing the equality of the scale parameters, let us assume that the hypothesis H : : is not rejected. To test H : : against H : , we need the MLEs of and . Harter and Moore obtain : 0.010776 and : 0.010471. From (10.3.2) we obtain G : (1.945 ; 2.715)(4.559 9 4.530) : 0.068 From Table B-13, the critical region for n : 40 is G 0.404. Hence we do not reject H . This decision is correct since : : 0.01. Note that the MLEs of , , , and are very close to their real values. 10.4 COMPARISON OF TWO GAMMA DISTRIBUTIONS Suppose that x , . . . , x , and y , . . . , y are the survival times of patients L L receiving two different treatments and that they follow the gamma distribution with the density function given in (6.4.1). Let and be the parameters of

    

253

the x population and and be those of the y population. The likelihood ratio tests introduced in Section 10.1 can be used to test whether the survival times observed from the x population and the y population have different gamma distributions. The estimation of the parameters is quite complicated but can be obtained using commercially available computer programs. In the following we introduce an F-test for testing the null hypothesis H : : against H : " , under the assumptions that the x ’s and y ’s are exact G G (uncensored) survival times, and that and are known (usually assumed equal). Let x and y be the sample mean survival times of the two groups. The test is based on the fact that x /y has the F-distribution with 2n and 2n degrees of freedom (Rao, 1952). Thus the test procedure is to reject H at the level if x /y exceeds F , the 100(/2) percentage point of the F-distribution LALA? with (2n , 2n ) degrees of freedom. Since the F-table gives percentage points for integer degrees of freedom only, interpolations (linear or bilinear) are necessary when either 2n or 2n is not an integer. The following example illustrates the test procedure. The data are adapted and modiﬁed from Harter and Moore (1965). They simulated 40 survival times from the gamma distribution with parameters : : : 2, : 0.01. The 40 individuals are divided randomly into two groups for illustrative purposes. Example 10.4 Consider the survival time of the two treatment groups in Table 10.2. The two populations follow the gamma distributions with a common shape parameter : 2. To test the hypothesis H : : against H : " , we compute x : 181.80, y : 173.55, and x /y : 1.048. Under the null hypothesis, x /y has the F-distribution with (80,80) degrees of freedom. Use < 1.45. Hence, we do not reject H at the 0.05 level of : 0.05, F signiﬁcance. The result is what we would expect since the two samples are simulated from the same overall sample of 40 with : 0.01. To test the equality of two lognormal distributions, we use the fact that the logarithmic transformation of the observed survival times follows the normal distributions, and thus we can use the standard tests based on the normal distribution. In general, for other distributions, such as log-logistic and the generalized gamma, the log-likelihood ratio statistics deﬁned in Section 10.1

Table 10.2 Survival Times of 40 Patients Receiving Two Different Treatments Treatment 1(x)

Treatment 2(y)

17, 28, 49, 98, 119 133, 145, 146, 158, 160, 174, 211, 220, 231, 252, 256, 267, 322, 323, 327

26, 34, 47, 59, 101, 112, 114, 136, 154, 154, 161, 186, 197, 226, 226, 243, 253, 269, 308, 465

254

      

can be applied to test whether the survival times observed from two groups have the same distribution. Readers can follow Example 10.2.1 in Section 10.2 and use the respective likelihood functions derived in Chapter 7 to construct the needed tests. Bibliographical Remarks In addition to the papers cited in this chapter, readers are referred to Mann et al. (1974), Gross and Clark (1975), Lawless (1982), and Nelson (1982).

EXERCISES 10.1 Derive the likelihood ratio tests in (10.1.8) and (10.1.10) for testing the equality of two Weibull distributions. 10.2 Derive the likelihood ratio test in (10.1.2) for testing the equality of two log-logistic distributions with unknown parameters. 10.3 Consider the remission data of the leukemia patients in Example 3.3. Assume that the remission times of the two treatment groups follow the exponential distribution. Test the hypothesis that the two treatments are equally effective using: (a) The likelihood ratio test (b) Cox’s F-test Obtain a 95% conﬁdence interval for the ratio of the two hazard rates. 10.4 For the same data in Exercise 10.3, test the hypothesis that : 5 . 10.5 Suppose that the survival time of two groups of lung cancer patients follows the Weibull distribution. A sample of 30 patients (15 from each group) was studied. Maximun likelihood estimates obtained from the two groups are, respectively, : 3, : 1.2 and : 2, : 0.5. Test the hypothesis that the two groups are from the same Weibull distribution. 10.6 Divide the lifetimes of 100 strips (delete the last one) of aluminum coupon in Table 6.4 randomly into two equal groups. This can be done by assigning the observations alternately to the two groups. Assume that the two groups follow a gamma distribution with shape parameter : 12. Test the hypothesis that the two scale parameters are equal. 10.7 Twelve brain tumor patients are randomized to receive radiation therapy or radiation therapy plus chemotherapy (BCNU) in a one-year clinical trial. The following survival times in weeks are recorded:



255

1. Radiation ; BCNU: 24, 30, 42, 15;, 40;, 42; 2. Radiation: 10, 26, 28, 30, 41, 12; Assuming that the survival time follows the exponential distribution, use Cox’s F-test for exponential distributions to test the null hypothesis H : : versus the alternative H : . 10.8 Use one of the nonparametric tests discussed in Chapter 5 to test the equality of survival distributions of the experimental and control groups in Example 10.2. Compare your result with that obtained in Example 10.2.

Statistical Methods for Survival Data Analysis. Elisa T. Lee and John Wenyu Wang Copyright ¶ 2003 John Wiley & Sons, Inc. ISBN: 0-471-36999-7

C H A P T E R 11

Parametric Methods for Regression Model Fitting and Identiﬁcation of Prognostic Factors

Prognosis, the prediction of the future of an individual patient with respect to duration, course, and outcome of a disease plays an important role in medical practice. Before a physician can make a prognosis and decide on the treatment, a medical history as well as pathologic, clinical, and laboratory data are often needed. Therefore, many medical charts contain a large number of patient (or individual) characteristics (also called concomitant variables, independent variables, covariates, prognostic factors, or risk factors), and it is often difﬁcult to sort out which ones are most closely related to prognosis. The physician can usually decide which characteristics are irrelevant, but a statistical analysis is usually needed to prepare a compact summary of the data that can reveal their relationship. One way to achieve this purpose is to search for a theoretical model (or distribution), that ﬁts the observed data and identify the most important factors. These models, usually regression models, extend the methods discussed in previous chapters to include covariates. In this chapter we focus on parametric regression models (i.e., we assume that the survival time follows a theoretical distribution). If an appropriate model can be assumed, the probability of surviving a given time when covariates are incorporated can be estimated. In Section 11.1 we discuss brieﬂy possible types of response and prognostic variables and things that can be done in a preliminary screening before a formal regression analysis. This section applies to methods discussed in the next four chapters. In Section 11.2 we introduce the general structure of a commonly used parametric regression model, the accelerated failure time (AFT) model. Sections 11.3 to 11.7 cover several special cases of AFT models. Fitting these models often involves complicated and tedious computations and requires computer software. Fortunately, most of the procedures are available in software packages such as SAS and BMDP. The SAS and BMDP code that 256

   

257

can be used to ﬁt the models are given at the end of the examples. Readers may ﬁnd these codes helpful. Section 11.8 introduces two other models. In Section 11.9 we discuss the model selection methods and goodness of ﬁt tests.

11.1 PRELIMINARY EXAMINATION OF DATA Information concerning possible prognostic factors can be obtained either from clinical studies designed mainly to identify them, sometimes called prognostic studies, or from ongoing clinical trials that compare treatments as a subsidiary aspect. The dependent variable (also called the response variable), or the outcome of prediction, may be dichotomous, polychotomous, or continuous. Examples of dichotomous dependent variables are response or nonresponse, life or death, and presence or absence of a given disease. Polychotomous dependent variables include different grades of symptoms (e.g., no evidence of disease, minor symptom, major symptom) and scores of psychiatric reactions (e.g., feeling well, tolerable, depressed, or very depressed). Continuous dependent variables may be length of survival from start of treatment or length of remission, both measured on a numerical scale by a continuous range of values. Of these dependent variables, response to a given treatment (yes or no), development of a speciﬁc disease (yes or no), length of remission, and length of survival are particularly common in practice. In this chapter we focus our attention on continuous dependent variables such as survival time and remission duration. Dichotomous and multiple-response dependent variables are discussed in Chapter 14. A prognostic variable (or independent variable) or factor may be either numerical or nonnumerical. Numerical prognostic variables may be discrete, such as the number of previous strokes or number of lymph node metastases, or continuous, such as age or blood pressure. Continuous variables can be made discrete by grouping patients into subcategories (e.g., four age subgroups: 20, 20—39, 40—59, and 60). Nonnumerical prognostic variables may be unordered (e.g., race or diagnosis) or ordered (e.g., severity of disease may be primary, local, or metastatic). They can also be dichotomous (e.g., a liver either is or is not enlarged). Usually, the collection of prognostic variables includes some of each type. Before a statistical calculation is done, the data have to be examined carefully. If some of the variables are signiﬁcantly correlated, one of the correlated variables is likely to be a predictor as good as all of them. Correlation coefﬁcients between variables can be computed to detect signiﬁcantly correlated variables. In deleting any highly correlated variables, information from other studies has to be incorporated. If other studies show that a given variable has prognostic value, it should be retained. In the next eight sections we discuss multivariate or regression techniques, which are useful in identifying prognostic factors. The regression techniques involve a function of the independent variables or possible prognostic factors.

258

       

The variables must be quantitative, with particular numerical values for each patient. This raises no problem when the prognostic variables are naturally quantitative (e.g., age) and can be used in the equation directly. However, if a particular prognostic variable is qualitative (e.g., a histological classiﬁcation into one of three cell types A, B, or C), something needs to be done. This situation can be covered by the use of two dummy variables, e.g., x , taking the value 1 for cell type A and 0 otherwise, and x , taking the value 1 for cell type B and 0 otherwise. Clearly, if there are only two categories (e.g., sex), only one dummy variable is needed: x is 1 for a male, 0 for a female. Also, a better description of the data might be obtained by using transformed values of the prognostic variables (e.g., squares or logarithms) or by including products such as x x (representing an interaction between x and x ). Transforming the dependent variable (e.g., taking the logarithm of a response time) can also improve the ﬁt. In practice, there are usually a larger number of possible prognostic factors associated with the outcomes. One way to reduce the number of factors before a multivariate analysis is attempted is to examine the relationship between each individual factor and the dependent variable (e.g., survival time). From the univariate analysis, factors that have little or no effect on the dependent variable can be excluded from the multivariate analysis. However, it would be desirable to include factors that have been reported to have prognostic values by other investigators and factors that are considered important from biomedical viewpoints. It is often useful to consider model selection methods to choose those signiﬁcant factors among all possible factors and determine an adequate model with as few variables as possible. Very often, a variable of signiﬁcant prognostic value in one study is unimportant in another. Therefore, conﬁrmation in a later study is very important in identifying prognostic factors. Another frequent problem in regression analysis is missing data. Three distinctions about missing data can be made: (1) dependent versus independent variables, (2) many versus few missing data, and (3) random versus nonrandom loss of data. If the value of the dependent variable (e.g., survival time) is unknown, there is little to do but drop that individual from analysis and reduce the sample size. The problem of missing data is of different magnitude depending on how large a proportion of data, either for the dependent variable or for the independent variables, is missing. This problem is obviously less critical if 1% of data for one independent variable is missing than if 40% of data for several independent variables is missing. When a substantial proportion of subjects has missing data for a variable, we may simply opt to drop them and perform the analysis on the remainder of the sample. It is difﬁcult to specify ‘‘how large’’ and ‘‘how small,’’ but dropping 10 or 15 cases out of several hundred would raise no serious practical objection. However, if missing data occur in a large proportion of persons and the sample size is not comfortably large, a question of randomness may be raised. If people with missing data do not show signiﬁcant differences in the dependent variable, the problem is not serious. If the data are not missing randomly, results obtained from dropping

     

259

subjects will be misleading. Thus, dropping cases is not always an adequate solution to the missing data problem. If the independent variable is measured on a nominal or categorical scale, an alternative method is to treat individuals in a group with missing information as another group. For quantitatively measured variables (e.g., age), the mean of the values available can be used for a missing value. This principle can also be applied to nominal data. It does not mean that the mean is a good estimate for the missing value, but it does provide convenience for analysis. A more detailed discussion on missing data can be found in Cohen and Cohen (1975, Chap. 7), Little and Rubin (1987), Efron (1994), Crawford et al. (1995), Heitjan (1997), and Schafer (1999).

11.2 GENERAL STRUCTURE OF PARAMETRIC REGRESSION MODELS AND THEIR ASYMPTOTIC LIKELIHOOD INFERENCE When covariates are considered, we assume that the survival time, or a function of it, has an explicit relationship with the covariates. Furthermore, when a parametric model is considered, we assume that the survival time (or a function of it) follows a given theoretical distribution (or model) and has an explicit relationship with the covariates. As an example, let us consider the Weibull distribution in Section 6.2. Let x : (x , . . . , x ) denote the p covariates N considered. If the parameter in the Weibull distribution is related to x as follows: : e9(a ; NG aG xG ) : exp[9(a ; ax)] where a : (a , . . . , a ) denote the coefﬁcients for x, then the hazard function of N the Weibull distribution in (6.2.4) can be extended to include the covariates as follows: h(t, x) : AtA\ : tA\e9(a ;NG aG xG ) : tA\ exp[9(a ; ax)]

(11.2.1)

The survivorship function in (6.2.3) becomes S(t, x) : (e\R A)exp(9(a;ax))

(11.2.2)

log[9log S(t, x)] : 9(a ; ax) ; log t

(11.2.3)

or

which presents a linear relationship between log[9log S(t, x)] and log t and the covariates. In Sections 11.2 to 11.7 we introduce a special model called the accelerated failure time model. Analogous to conventional regression methods, survival time can also be analyzed by using the accelerated failure time (AFT) model. The AFT model

260

       

for survival time assumes that the relationship of logarithm of survival time T and the covariates is linear and can be written as N log T : a ; a x ; H H H

(11.2.4)

where x , j : 1, . . . , p, are the covariates, a , j : 0, 1, . . . , p the coefﬁcients, H H ( 0) is an unknown scale parameter, and , the error term, is a random variable with known forms of density function g( , d) and survivorship function G( , d) but unknown parameters d. This means that the survival is dependent on both the covariate and an underlying distribution g. Consider a simple case where there is only one covariate x with values 0 and 1. Then (11.2.4) becomes log T : a ; a x ; Let T and T denote the survival times for two individuals with x : 0 and x : 1, respectively. Then, T : exp(a ; ), and T : exp(a ; a ; ) : T exp(a ). Thus, T T if a 0 and T T if a 0. This means that the covariate x either ‘‘accelerates’’ or ‘‘decelerates’’ the survival time or time to failure — thus the name accelerated failure time models for this family of models. In the following we discuss the general form of the likelihood function of AFT models, the estimation procedures of the regression parameters (a , a, , and d) in (11.2.4) and tests of signiﬁcance of the covariates on the survival time. The calculations of these procedures can be carried out using available software packages such as SAS and BMDP. Readers who are not interested in the mathematical details may skip the remaining part of this section and move on to Section 11.3 without loss of continuity. Let t , t , . . . , t be the observed survival times from n individuals, including L exact, left-, right-, and interval-censored observations. Assume that the log survival time can be modeled by (11.2.4) and let a : (a , a , . . . , a ), and N b : (a, d, a , ). Similar to (7.1.1), the log-likelihood function in terms of the density function g( ) and survivorship function G( ) of is l(b) : log L (b) : log[g( )] ; log[G( )] G G log[1 9 G( )] ; log[G( ) 9 G( )] G G G

(11.2.5)

where : G

log t 9 a 9 N a x H H HG G

(11.2.6)

: G

log 9 a 9 N a x H H HG G

(11.2.7)

     

261

The ﬁrst term in the log-likelihood function sums over uncensored observations, the second term over right-censored observations, and the third term over left-censored observations, and the last term over interval-censored observations with as the lower end of a censoring interval. Note that the last G two summations in (11.2.5) do not exist if there are no left- and intervalcensored data. Alternatively, let N

:a ; a x G H HG H

i : 1, 2, . . . , n

(11.2.8)

Then (11.2.4) becomes log T : ;

(11.2.9)

The respective alternative log-likelihood function in terms of the density function f (t, b) and survivorship function S(t, b) of T is l(b) : log L (b) : log[ f (t , b)] ; log[S(t , b)] G G ; log[1 9 S(t , b)] ; log[S( , b) 9 S(t , b)] G G G

(11.2.10)

where f (t, b) can be derived from (11.2.4) through the density function g( ) by applying the density transformation rule f (t, b) :

g((log t 9 )/) t

(11.2.11)

and S(t, b) is the corresponding survivorship function. The vector b in (11.2.10) and (11.2.11) includes the regression coefﬁcients and other parameters of the underlying distribution. Either (11.2.5) or (11.2.10) can be used to derive the maximum likelihood estimates (MLEs) of parameters in the model. For a given log-likelihood function l(b), the MLE b is a solution of the following simultaneous equations: (l(b)) :0 b G

for all i

(11.2.12)

Usually, there is no closed solution for the MLE b from (11.2.12) and the Newton—Raphson iterative procedure in Section 7.1 must be applied to obtain b . By replacing the parameters b with its MLE b in S(t , b), we have an G estimated survivorship function S(t, b ), which takes into consideration the covariates. All of the hypothesis tests and the ways to construct conﬁdence intervals shown in Section 7.1 can be applied here. In addition, we can use the following tests to test linear relationships among the regression coefﬁcients a , a , . . . , a . N

262

       

To test a linear relationship among x , . . . , x is equivalent to testing the N null hypothesis that there is a linear relationship among a , a , . . . , a . H can N be written in general as H : La : c

(11.2.13)

where L is a matrix or vector of constants for the linear hypothesis and c is a known column vector of constants. The following Wald’s statistics can be used: X : (La 9 c)[LV (a )L]\(La 9 c) 5 ?

(11.2.14)

where V (a ) is the submatrix of the covariance matrix V (b ) corresponding to a. ? Under the H and some mild assumptions, X has an asymptotic chi-square 5 distribution with degrees of freedom, where is the rank of L. For a given signiﬁcance level , H is rejected if X or X ,19/2 . J? J 5 5 For example, if p : 3 and we wish to test if x and x have equal effects on the survival time, the null hypothesis is H : a : a (or a 9 a : 0). It is easy to see that for this hypothesis, the corresponding L : (1, 91, 0) and c : 0 since La : (1, 91, 0)(a , a , a ) : a 9 a Let the (i, j ) element of V (a ) be ; then the X deﬁned in (11.2.14) becomes ? GH 5

X : (a 9 a ) (1, 91, 0) 5 (a 9 a ) : ; 9 2

1

91 0

\ (a 9 a )

X has an asymptotic chi-square distribution with 1 degree of freedom (the 5 rank of L is 1). In general, to test if any two covariates have the same effects on T, the null hypothesis can be written as H : a : a (or a 9 a : 0) G H G H

(11.2.15)

The corresponding L : (0, . . . , 0, 1, 0, . . . , 0, 91, 0, . . . , 0) and c : 0, and the X in (11.2.14) becomes 5 (a 9 a ) G H X : 5 ; 9 2 GG HH GH

(11.2.16)

  

263

which has an asymptotic chi-square distribution with 1 degree of freedom. H is rejected if X or X . ? \? 5 5 To test that none of the covariates is related to the survival time, the null hypothesis is H :a:0

(11.2.17)

The respective test statistics for this overall null hypothesis are shown in Section 9.1. For example, the log-likelihood ratio statistics there becomes X : 92[l(0, d (0), a (0), (0)) 9 l(b )] *

(11.2.18)

which has an asymptotic chi-square distribution with p degrees of freedom under H , where p is the number of covariates; d (0), a (0), and (0) are the MLE of d, a , and given a : 0. 11.3 EXPONENTIAL REGRESSION MODEL To incorporate covariates into the exponential distribution, we use (11.2.4) for the log survival time and let : 1: N log T : a ; a x ; : ; , G H HG G G G H

(11.3.1)

where : a ; N a x , ’s are independently identically distributed (i.i.d.) H H HG G G random variables with a double exponential or extreme value distribution which has the following density function g( ) and survivorship function G( ): g( ) : exp[ 9 exp( )]

(11.3.2)

G( ) : exp[9exp( )]

(11.3.3)

This model is the exponential regression model. T has the exponential distribution with the following hazard, density, and survivorship functions.

N h(t, ) : : exp 9 a ; a x G G H HG H f (t, ) : exp(9 t) G G G S(t, ) : exp(9 t) G G

: exp(9 ) G

(11.3.4) (11.3.5) (11.3.6)

where is given in (11.3.4). Thus, the exponential regression model assumes a G linear relationship between the covariates and the logarithm of hazard. Let

264

       

h (t, ) and h (t, ) be the hazards of individuals i and j; the hazard ratio of G G H H these two individuals is

N h (t, ) G G : G : exp[9( 9 )] : exp 9 a (x 9 x ) G H I IG IH h (t, ) H I H H

(11.3.7)

This ratio is dependent only on the differences of the covariates of the two individuals and the coefﬁcients. It does not depend on the time t. In Chapter 12 we introduce a class of models called proportional hazard models in which the hazard ratio of any two individuals is assumed to be a time-independent constant. The exponential regression model is therefore a special case of the proportional hazard models. The MLE of b : (a , a , . . . , a ) is a solution of (11.2.12), using (11.2.10), N where f (t, ) and S(t, ) are given in (11.3.5) and (11.3.6). Computer programs in SAS or BMDP can be used to carry out the computation. In the following we introduce a practical exponential regression model. Suppose that there are n : n ; n ; % ; n individuals in k treatment I groups. Let t be the survival time and x , x , . . . , x the covariates of the GH GH GH NGH jth individual in the ith group, where p is the number of covariates considered, i : 1, . . . , k, and j : 1, . . . , n . Deﬁne the survivorship function for the jth G individual in the ith group as S (t) : exp(9 t) GH GH

(11.3.8)

where : exp(9 ) and GH GH

N

:9 a ; a x GH G J JGH J

(11.3.9)

This model was proposed by Glasser (1967) and was later investigated by Prentice (1973) and Breslow (1974). The term exp(9a ) represents the G underlying hazard of the ith group when covariates are ignored. It is clear that

deﬁned in (11.3.9) is a special case of (11.3.4) by adding a new index for the GH treatment groups. To construct the likelihood function, we use the following indicator variables to distinguish censored observations from the uncensored:

1 : GH 0

if t uncensored GH if t censored GH

According to (11.2.10) and (11.3.8), the likelihood function for the data can then be written as I LG L ( ) : ( )BGH exp(9 t ) GH GH GH GH G H

  

265

Substituting (11.3.9) in the logarithm of the function above, we obtain the log-likelihood function of a : (a , a , . . . , a ) and a : (a , a , . . . , a ): I N I l(a , a) : G I : G where

LG N N a ; a x 9 t exp a ; a x GH G J JGH GH G J JGH H J J N LG N a r ; a s 9 exp(a ) t exp a x G G J GJ G GH J JGH J J H

(11.3.10)

LG s : x GJ GH JGH H is the sum of the lth covariate corresponding to the uncensored survival times in the ith group and r is the number of uncensored times in that group. G Maximum likelihood estimates of a ’s and a ’s can be obtained by solving G J the following k ; p equations simultaneously. These equations are obtained by taking the derivative of l(a , a) in (11.3.10) with respect to the k a ’s and p a ’s: G J

LG N r 9 exp(a ) t exp a x : 0 G G GH J JGH H J I LG N s 9 exp(a ) t x exp a x :0 GJ G GH JGH J JGH G H J

i : 1, . . . , k

(11.3.11)

l : 1, . . . , p

(11.3.12)

This can be done by using the Newton—Raphson iterative procedure in Section 7.1. The statistical inferences for the MLE and the model are the same as those stated in Section 7.1. Let a and a be the MLE of a and a in (11.3.10), and a (0) be the MLE of a given a : 0. According to (11.2.18), the difference between l(a , a ) and l(a (0), 0) can be used to test the overall null hypothesis (11.2.17) that none of the covariates is related to the survival time by considering X : 92(l(a (0), 0) 9 l(a , a )) *

(11.3.13)

as chi-square distributed with p degrees of freedom. A X greater than the 100 * percentage point of the chi-square distribution with p degrees of freedom indicates signiﬁcant covariates. Thus, ﬁtting the model with subsets of the covariates x , x , . . . , x allows selection of signiﬁcant covariates of prognostic N variables. For example, if p : 2, to test the signiﬁcance of x after adjusting for x , that is, H : a : 0, we compute X : 92[l(a (0), a (0), 0) 9 l(a , a , a )] *

266

       

Table 11.1 Summary Statistics for the Five Regimens Additive Therapy

Regimen

6-MP Cycle

MTX Cycle

Number of Patients

Number in Remission

Geometric Mean? of WBC

1 2 3 4 5 1, 2, 4 3, 5 All

A-D A-D NM NM None — — —

NM A-D NM A-D None — — —

46 52 64 54 52 152 116 268

20 18 18 14 17 52 35 87

9,000 12,308 15,014 9,124 13,421 10,067 14,280 11.711

Median Mean Remission Age (yr) Duration 4.61 5.25 5.70 4.30 5.02 4.74 5.40 5.02

510 409 307 416 420 435 340 412

Source: Breslow (1974). Reproduced with permission of the Biometric Society. ? The geometric mean of x , x , . . . , x is deﬁned as (L x )L. It gives a less biased measure of L G G central tendency than the arithmetic mean when some observations are extremely large.

where a (0) and a (0) are, respectively, the MLE of a and a given a : 0. X * follows the chi-square distribution with 1 degree of freedom. A signiﬁcant X * value indicates the importance of x . This can be done automatically by a stepwise procedure. In addition, if one or more of the covariates are treatments, the equality of survival in speciﬁed treatment groups can be tested by comparing the resulting maximum log-likelihood values. Having estimated the coefﬁcients a and a , a survivorship function adjusted for covariates can then G J be estimated from (11.3.9) and (11.3.8). The following example, adapted from Breslow (1974), illustrates how this model can identify important prognostic factors. Example 11.1 Two hundred and sixty-eight children with newly diagnosed and previously untreated ALL were entered into a chemotherapy trial. After successful completion of an induction course of chemotherapy designed to induce remission, the patients were randomized onto ﬁve maintenance regimens designed to maintain the remission as long as possible. Maintenance chemotherapy consisted of alternating eight-week cycles of 6-MP and methotrexate (MTX) to which actinomycin-D (A-D) or nitrogen mustard (NM) was added. The regimens are given in Table 11.1. Regimen 5 is the control. Many investigators had a prior feeling that actinomycin-D was the active additive drug; therefore, pooled regimens 1, 2, and 4 (with actinomycin-D) were compared to regimens 3 and 5 (without actinomycin-D). Covariates considered were initial WBC and age at diagnosis. Analysis of variance showed that differences between the regimens with respect to these variables were not signiﬁcant. Table 11.1 shows that the regimen with lowest (highest) WBC geometric mean has the longest (shortest) estimated remission duration. Figure

  

267

Figure 11.1 Remission curves of all patients by WBC at diagnosis. (From Breslow, 1974. Reproduced with permission of the Biometric Society.)

11.1 gives three remission curves by WBC; differences in duration were signiﬁcant. It is well known that the initial WBC is an important prognostic factor for patients followed from diagnosis; however, it is interesting to know if this variable will continue to be important after the patient has achieved remission. To identify important prognostic variables, model (11.3.9) was used to analyze the effect of WBC and age at diagnosis. Previous studies (Pierce et al., 1969; George et al., 1973) showed that survival is longest for children in the middle age range (6—8 years), suggesting that both linear and quadratic terms in age be included. The WBC was transformed by taking the common logarithm. Thus, the number of covariates is p : 3. Let x , x , and x denote log (WBC), age, and age squared, and a , a , and a be the respective coefﬁcients. Instead of using a stepwise ﬁtting procedure, the model was ﬁtted ﬁve times using different numbers of covariates. Table 11.2 gives the results. The estimated regression coefﬁcients were obtained by solving (11.3.11) and (11.3.12). Maximum log-likelihood values were calculated by substituting the regression coefﬁcients with the estimates in (11.3.10). The X values were * computed following (11.3.13), which show the effect of the covariates included. The ﬁrst ﬁt did not include any covariates. The log-likelihood so obtained is the unadjusted value l(a (0), 0) in (11.3.13). The second ﬁt included only x or log (WBC), which yields a larger log-likelihood value than the ﬁrst ﬁt. Following (11.3.13), we obtain X : 92(l(a (0), 0) 9 l(a , a )) : 92(91332.925 ; 1316.399) : 33.05 *

268

       

Table 11.2 Regression Coefﬁcients and Maximum Log-Likelihood Values for Five Fits Regression Coefﬁcient Fit 1 2 3 4 5

Covariates Included

Maximum Log-Likelihood

None x (log WBC) x , x (age) x , x (age squared) x ,x ,x

91332.925 91316.399 91316.111 91327.920 91314.065

b

0.72 0.73 0.67

b

b

0.02 90.24 90.14

0.018 0.011

df

33.05 33.63 10.01 37.72

1 2 2 3

Source: Breslow (1974). Reproduced with permission of the Biometric Society.

with 1 degree of freedom. The highly signiﬁcant (p 0.001) X value indicates * the importance of WBC. When age and age squared are included (ﬁt 4) in the model, the X value, 10.01, is less than that of ﬁt 2. This indicates that WBC * is a better predictor than age as the only covariate. To test the signiﬁcance of age effects after adjusting for WBC, we subtract the log-likelihood value of ﬁt 2 from that of ﬁt 5 and obtain X : 92(91316.399 ; 1314.065) : 4.668 * with 3 9 1 : 2 degrees of freedom. The signiﬁcance of this X value is marginal * (p : 0.10). Comparing the maximum log-likelihood value of ﬁt 2 to that of ﬁt 5, we ﬁnd that log WBC accounts for the major portion of the total covariate effect. Thus, log(WBC) was identiﬁed as the most important prognostic variable. In addition, subtracting the maximum log-likelihood value of ﬁt 5 from that of ﬁt 3 yields X : 92(91316.111 ; 1314.065) : 4.092 * with 1 degree of freedom. This signiﬁcant (p 0.05) value indicates that the age relationship is indeed a quadratic one, with children 6 to 8 years old having the most favorable prognosis. For a complete analysis of the data, the interested reader is referred to Breslow (1974). To use SAS to perform the analysis, let T be the remission duration, TG an indicator variable (TG : 1 if in regimen groups 1, 2, and 4; 0 otherwise), CENS a second indicator variable (CENS : 0 when t is censored; 1 otherwise), and x1, x2, and x3 be log (WBC), age, and age squared, respectively. Assume that the data are saved in ‘‘C:RDT.DAT’’ as a text ﬁle, which contains six columns, and that each row (consisting of six space-separated numbers) gives the observed T, CENS, TG, x1, x2, and x3 from a child. For instance, a ﬁrst row

  

269

in RDT.DAT may be 500

1

0

4.079

5.2

27.04

which represents that a 5.2-year-old child with initial log (WBC) : 4.079 who received regimen 3 or 5 relapsed after 500 days [i.e., t : 500, CENS : 1, TG : 0, x1 : 4.079, x2 : 5.2, and x3 (age squared) : 27.04]. For this data set, the following SAS code can be used to perform ﬁts 1 to 5 in Table 11.2 by using procedure LIFEREG. data w1; inﬁle ‘c:rdt.dat’ missover; input t cens tg x1 x2 x3; run; proc lifereg; model 1: model t*cens(0) : tg model 2: model t*cens(0) : tg model 3: model t*cens(0) : tg model 4: model t*cens(0) : tg model 5: model t*cens(0) : tg run;

/ d : exponential; x1/ d : exponential; x1 x2/ d : exponential; x2 x3/ d : exponential; x1 x2 x3/ d : exponential;

For BMDP procedure 2L the following code can be used for ﬁt 5. /input

/print /variable /form

/regress

ﬁle : ‘c:rdt.dat’. variables : 6. format : free. level : brief. names : t, cens, tg, x1, x2, x3. time : t. status : cens. response : 1. covariates : tg, x1, x2, x3. accel : exponential.

/end

11.4 WEIBULL REGRESSION MODEL To consider the effects of covariates, we use the model (11.2.4); that is, the log-survival-time of individual i is N log T : a ; a x ; : ; G I IG G G G I

(11.4.1)

where : a ; N a x and has the distribution deﬁned in (11.3.2) and I I IG G

270

       

(11.3.3). This model is the Weibull regression model. T has the Weibull distribution with

: exp 9 G G

and :

1

(11.4.2)

and the following hazard, density, and survivorship functions that are related with covariates via in (11.4.2): G h(t, , ) : tA\ G G f (t, , ) : tA\ exp(9 tA) G G G S(t, , ) : exp(9 tA) G G

(11.4.3) (11.4.4) (11.4.5)

The hazard ratio of any two individuals i and j, based on (11.4.3) and (11.4.2), is

9 1 N h H : exp 9 a (x 9 x ) G : exp 9 G I IG IH h I H

which is not time-dependent. Therefore, similar to the exponential regression model, the Weibull regression model is also a special case of the proportional hazard models. The following example illustrates the use of the Weibull regression model and of computer software packages. Example 11.2 Consider the tumor-free time in Table 3.4. Suppose that we wish to know if three diets have the same effect on the tumor-free time. Let T be the tumor-free time; CENS be an index (or dummy) variable with CENS : 0 if T is censored and 1 otherwise; and LOW, SATU, and UNSA be index variables indicating that a rat was fed a low-fat, saturated fat, or unsaturated fat diet, respectively (e.g., LOW : 1 if fed a low-fat diet; 0 otherwise). The data from the 90 rats in Table 3.4 can be presented using these ﬁve variables. For example, the three observations in the ﬁrst row of Table 3.4 can be rearranged as

T 140 124 112

CENS 1 1 1

LOW 1 0 0

SATU 0 1 0

UNSA 0 0 1

Assume that the rearranged data are saved in the text ﬁle ‘‘C:RAT.DAT’’, which contains the data from the 90 rats in ﬁve columns as above and the ﬁve numbers in each row are space-separated. This data ﬁle is ready for almost all

  

271

of the statistical software packages for parametric survival analysis currently available, such as SAS and BMDP. Suppose that the tumor-free time follows the Weibull distribution and the following Weibull regression model is used: log T : a ; a SATU ; a UNSA ; : ; G G G G G G

(11.4.6)

where has a double exponential distribution as deﬁned in (11.3.2) and G (11.3.3). Note that from (11.4.3) and (11.4.2), log h(t, , ) : log ; log(tA\) G G

: 9 G ; log(tA\) :

9a 9 a SATU 9 a UNSA G G ; log(tA\)

(11.4.7)

Denote the hazard function of a rat fed an unsaturated, saturated, and low-fat diet as h , h , and h , respectively. From (11.4.7), log h : (9a 9 a )/ S Q J S ; log(tA\), log h : (9a 9 a )/ ; log(tA\), and log h : 9a / Q J ; log(tA\). Thus, the logarithm of the hazard ratio of rats fed a low-fat diet and those fed a saturated fat diet is log(h /h ) : a /, and the similar ratios J Q of rats fed a low-fat diet and those an unsaturated fat diet, and of rats fed a saturated fat diet and those fed an unsaturated fat diet are, respectively, log(h /h ) : a / and log(h /h ) : (a 9 a )/. These ratios are constants and J S Q S are independent of time. Therefore, to test the null hypothesis that the three diets have an equal effect on tumor-free time is equivalent to testing the following three hypotheses: H : h /h : 1 or a : 0, H : h /h : 1, or a : 0, J Q J S and H : h /h : 1 or a : a . The statistic deﬁned in Section 9.1.1 can be used Q S to test the ﬁrst two null hypotheses, and the statistic deﬁned in (11.2.16) can be used for the third one. Failure to reject a null hypothesis implies that the corresponding log-hazard ratio is not statistically different from zero; that is, there are no statistically signiﬁcant differences between the two corresponding diets. For example, failure to reject H : a : 0 means that there are no signiﬁcant differences between the hazards for rats fed a low-fat diet and rats fed a saturated fat diet. When all three hypotheses H : a : 0, H : a : 0, and H : a : a are rejected, we conclude that the three diets have signiﬁcantly different effects on tumor-free time. Furthermore, a positive (negative) estimated implies that the hazard of a rat fed a low-fat diet is exp(a /) times higher (lower) than that of a rat fed a saturated fat diet. Similarly, a positive (negative) estimated a and (a 9 a ) imply, respectively, the hazard of a rat fed a low-fat diet is exp(a /) times higher (lower) than that of a rat fed an unsaturated fat diet, and the hazard of a rat fed a saturated fat diet is exp[(a 9 a )/] times higher (lower) than that of a rat fed an unsaturated fat diet.

272

       

To estimate the unknown coefﬁcients, a , a , a , and , we construct the log-likelihood function by replacing in (11.4.2), (11.4.4), and (11.4.5) with (11.4.6). Next, place the resulting f (t , , ) and S(t , , ) in the log-likelihood G G G G function (11.2.10). The log-likelihood function for the observed 90 exact or right-censored tumor-free times, t , t , . . . , t , in the three diet groups is l(a , a , a , ) : log[ f (t , , )] ; log[S(t , , )] G G G G : [log ; ( 9 1) log t 9 9 tA exp(9 )] G G G G ; [9tA exp(9 )] G G : log ; ( 9 1) log t 9 (a ; a SATU ; a UNSA ) G 9tA exp[9(a ; a SATU ; a UNSA )] G ; 9tA exp[9(a ; a SATU ; a UNSA )] G The ﬁrst term in the log-likelihood function sums over the uncensored observations, and the second term sums over the right-censored observations. The MLE (a , a , a , ) of (a , a , a , ) where : 1/ is a solution of (11.2.12) with the above log-likelihood function by applying the Newton—Raphson iterative procedure. The results from SAS are shown in Table 11.3, where INTERCPT : a and SCALE : . The MLE : 0.43, a : 90.394, a : 90.739, and a 9 a : 90.345. H : a : 0 (or h /h : 1), H : a : 0 (or J Q h /h : 1), and H : a 9 a : 0 (or h /h : 1) are rejected at signiﬁcance level J S Q S p : 0.0065, p : 0.0001, and p : 0.0038, respectively. The conclusion that the data indicate signiﬁcant differences among the three diets is the same as that obtained in Chapter 3 using the k-sample test. Furthermore, both a and a are negative and h /h : exp(a /) : exp(90.916) : 0.40, h /h : exp(a / J Q J S ) : exp(91.719) : 0.18, and h /h : exp((a 9 a )/ ) : exp(90.802) : 0.45. Q S Thus, based on the data observed, the hazard of rats fed a low-fat diet is 40% and 18% of the hazard of rats a saturated fat diet and an unsaturated fat diet, respectively, and the hazard of rats fed a saturated fat diet is 45% of that of rats fed an unsaturated fat diet. The survivorship function in (11.4.5) can be estimated by using (11.4.2) and the MLE of a , a , a , and : S (t, , ) : exp(9t)

: exp 9exp 9

1 (a ; a SATU ; a UNSA) t1/

: exp[9exp(912.56 ; 0.92;SATU ; 1.72;UNSA)t ] Based on S (t, , ), we can estimate the probability of surviving a given time G for rats fed with any of the diets. For example, for rats fed a low-fat diet,

  

273

Table 11.3 Analysis Results for Rat Data in Table 3.4 Using a Weibull Regression Model Regression Coefﬁcient

Standard Error

INTERCPT (a ) TRTSA(a ) TRTUS(a ) SCALE()

5.400 90.394 90.739 0.430

a 9 a

90.345

Variable

exp(a /) G

X *

p

0.113 0.145 0.140 0.043

2297.610 7.407 28.049

0.0001 0.0065 0.0001

0.40 0.18

0.119

8.355

0.0038

0.45

(SATU : 0 and UNSA : 0), the probability of being tumor-free for 200 days is S

*-5

(200) : exp[9exp(912.56)(200) ] : exp[90.00000353(200) ] : 0.132

and for rats fed an unsaturated fat diet, (SATU : 0 and UNSA : 1), the probability is 0.011. Following is the SAS code used to obtain Table 11.3, based on the Weibull regression model in (11.4.6). data w1; inﬁle ‘c:rat.dat’ missover; input t cens low satu unsa; run; proc lifereg covout; model t*cens(0) : satu unsa / d : weibull; run;

The respective BMDP procedure 2L code based on (11.4.6) is /input

/print /variable /form

/regress /end

ﬁle : ‘c:rat.dat’. variables : 5. format : free. level : brief. names : t, cens, low, satu, unsa. time : t. status : cens. response : 1. covariates : satu, unsa . accel : weibull.

274

       

11.5 LOGNORMAL REGRESSION MODEL Let in (11.2.4) be the standard normal random variable with the density function g( ) and survivorship function G( ), g( ) :

exp(9 /2)

(11.5.1)

(2

G( ) : 1 9 ( ) : 1 9

1

C

(2 \

e\V dx

(11.5.2)

where is the cumulative distribution function of the standard normal distribution. Then the model deﬁned by (11.2.4) for the survival time T of individual i, N log T : a ; a x ; : ; G I IG G G G I is the lognormal regression model. T has the lognormal distribution with the density function f (t, , ) : G

exp[9(log t 9 )/2] G (2 t

(11.5.3)

and the survivorship function S(t, , ) : 1 9 G

log t 9 G

(11.5.4)

It can be shown that the hazard function h(t, , a , a , . . . , a ) of T with N covariate x , x , . . . , x and unknown parameters and coefﬁcients , a , N a , . . . , a can be written as N log h(t, , a , a , . . . , a ) : log h [t exp(9 )] 9 N

(11.5.5)

where h ( · ) is the hazard function of an individual with all covariates equal to zero. Equation (11.5.5) indicates that h(t, , a , a , . . . , a ) is a function of h N evaluated at t exp(9 ), not independent of t. Thus, the lognormal regression model is not a proportional hazards model. Example 11.3 Consider the survival time data from 30 patients with AML in Table 11.4. Two possible prognostic factors or covariates, age, and cellular-

  

275

Table 11.4 Survival Times and Data for Two Possible Prognostic Factors of 30 AML Patients Survival Time

x

x

Survival Time

x

x

18 9 28; 31 39; 19; 45; 6 8 15 23 28; 7 12 9

0 0 0 0 0 0 0 0 0 0 0 0 0 1 1

0 1 0 1 1 1 1 1 1 1 0 0 1 0 0

8 2 26; 10 4 3 4 18 8 3 14 3 13 13 35;

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

0 1 0 1 0 0 0 1 1 1 1 0 1 1 0

ity status are considered:

1 x : 0

if patient is 50 years old otherwise

1 x : 0

if cellularity of marrow clot section is 100% otherwise

Let us use the lognormal regression model log T : a ; a x ; a x ; G G G G

(11.5.6)

and

:a ;a x ;a x G G G

(11.5.7)

The unknown coefﬁcients and parameter a , a , a , need to be estimated. We construct the log-likelihood function by replacing in (11.5.3) and (11.5.4) with (11.5.7), then replacing f (t , , ) and S(t , , ) in the log-likelihood G G function (11.2.5) with their expression (11.5.3) and (11.5.4), respectively. The resulting log-likelihood function for the exact and right-censored survival times

276

       

observed from the 30 patients with AML is

l(a , a , a , ) : 9

(log t 9 ) G G 9 log((2 t ) G 2

; log 1 9

: 9

log t 9 G G

[log t 9 (a ; a x ; a x )] G G G 9 log(t (2) G 2

; log 1 9

(log t 9 (a ; a x ; a x ) G G G

The ﬁrst term in the log-likelihood function sums over the uncensored observations, and the second sums over the right-censored observations. The MLE (a , a , a , ) of (a , a , a , ) can be obtained by applying the Newton—Raphson iterative procedure. The hypothesis-testing procedures discussed in Section 9.1.2 can be used to test whether the coefﬁcients a and a are equal to zero. Table 11.5 shows that a is signiﬁcantly (p : 0.0039) different from zero, while a is not (p : 0.4514). The signs of the regression coefﬁcients indicate that age over 50 years has signiﬁcantly negative effects on the survival time, while a 100% cellularity of marrow clot section also has a negative effect; however, the effect is not of signiﬁcant importance to the survival time. Let T be the survival time and CENS be an index (or dummy) variable with CENS : 0 if T is censored and 1 otherwise. Assume that the data are saved in a text ﬁle ‘‘C:AML.DAT’’ with four numbers in each row, spaceseparated, which contains successively T, CENS, x1, and x2. Let T be the survival time and CENS be an index (or dummy) variable with CENS : 0 if T is censored and 1 otherwise. Assume that the data are saved in a text ﬁle ‘‘C:AML.DAT’’ with four numbers in each row, space-separated, which contains successively T, CENS, x1, and x2. The following SAS code is used to obtain the results in Table 11.5. Table 11.5 Asymptotic Likelihood Inference for Data on 30 AML Patients Using a Lognormal Regression Model

Variable? INTERCPT (a ) x (a ) x (a ) SCALE ()

Regression Coefﬁcient

Standard Error

3.3002 91.0417 90.2687 0.9075

0.3750 0.3605 0.3568 0.1409

X *

p

77.4675 8.3475 0.5672

0.0001 0.0039 0.4514

? x : 1 if patient 50 years old, and 0 otherwise; x : 1 if cellularity of marrow clot section is 100%, and 0 otherwise.

    

277

data w1; inﬁle ‘c:aml.dat’ missover; input t cens x1 x2; run; proc lifereg; model 1: model t*cens(0) : x1 x2 / d : lnormal; run;

If BMDP is used, the following 2L code is suggested. /input

/print /variable /form

/regress

ﬁle : ‘c:aml.dat’. variables : 4. format : free. level : brief. names : t, cens, x1, x2. time : t. status : cens. response : 1. covariates : x1, x2. accel : lnormal.

/end

11.6 EXTENDED GENERALIZED GAMMA REGRESSION MODEL In this section we introduce a regression model that is based on an extended form of the generalized gamma distribution deﬁned in Section 6.4. Assume that the survival time T of individual i and covariates x , . . . , x have the relation N ship given in (11.4.1), where has the log-gamma distribution with the density function g( ) and survivorship function G( ): g( ) :

G( ) :

[exp( )/]B exp[9exp( )/] (1/) exp( ) 1 I , if 0

19I

exp( ) 1 ,

(11.6.1) (11.6.2)

if 0 9- ;-

(11.6.3)

This model is the extended generalized gamma regression model. It can be shown that T has the extended generalized gamma distribution with the density function A?A t?A\ exp[9( t)?] G G ()

(11.6.4)

I(( t)?, ) G 1 9 I(( t)?, ) G

(11.6.5) (11.6.6)

f (t, , , ) : and survivorship function S(t, , , ) :

if 0 if 0

278

       

where : exp(9 ) G G

:

:

1

(11.6.7)

(x) is the complete gamma function deﬁned in (6.2.9), I(a, x) is the incomplete gamma function deﬁned in (6.4.4), and is a shape parameter. We used the extended generalized gamma distribution in (11.6.4) here because it is the distribution used in SAS. The derivation is left to the reader as an exercise (Exercise 11.12). The estimation procedures for the parameters, regression coefﬁcients, and the covariate adjusted survivorship function are similar to those discussed in Sections 11.3 and 11.4. Example 11.4 Consider the survival times (T ) in days and a set of prognostic factors or covariates from 137 lung cancer patients, presented in Appendix I of Kalbﬂeisch and Prentice (1980). The covariates include the Karnofsky measure of the overall performance status (KPS) of the patient at entry into the trial, time in months from diagnosis to entry into the trial (DIAGTIME), age in years (AGE), prior therapy (INDPRI, yes or no), histological type of tumor, and type of therapy. There are four histological types of tumor: adeno, small, large, and squamous cell and two types of therapies: standard and experimental. The values of KPS have the following meanings: 10—30 completely hospitalized, 40—60 partial conﬁnement, 70—90 able to care for self. Assume that the survival time follows the extended generalized gamma regression model, we wish to identify the most signiﬁcant prognostic variables. First we deﬁne several index (or dummy) variables for the categorical variables and the censoring status. Let CENS : 0 when the survival time T is censored and 1 otherwise; INDADE : 1, INDSMA : 1, and INDSQU : 1 if the type of cancer cell is adeno, small, and squamous, respectively, and 0 otherwise; INDTHE : 1 if the standard therapy is received and 0 otherwise; and INDPRI : 1 if there is a prior therapy and 0 otherwise. The model is log T : a ; a KPS ; a AGE ; a DIAGTIME ; a INDPRI G G G G G ; a INDTHE ; a INDADE ; a INDSMA ; a INDSQU ; G G G G G (11.6.8) where the density function of is deﬁned in (11.6.1). Thus, G

: a ; a KPS ; a AGE ; a DIAGTIME ; a INDPRI ; a INDTHE G G G G G G ; a INDADE ; a INDSMA ; a INDSQU (11.6.9) G G G To estimate a , . . . , a , , a , and , we construct the log-likelihood function by replacing in (11.6.7) and (11.6.4)—(11.6.6) with (11.6.9), then replacing f (t , b) G and S(t , b) in the likelihood function (11.2.10) by those in (11.6.4) and (11.6.5) G or (11.6.6). The MLE (a , . . . , a , , a , ) of (a , . . . , a , , a , ) can be

    

279

Table 11.6 Asymptotic Likelihood Inference on Lung Cancer Data Using a Generalized Gamma Regression Model Regression Coefﬁcient

Standard Error

INTERCPT (a ) INDADE (a ) INDSMA (a ) INDSQU (a ) KPS (a ) AGE (a ) DIAGTIME (a ) INDPRI (a ) INDTHE (a ) SCALE () SHAPE ()

2.176 90.759 90.594 0.150 0.034 0.008 0.000 90.089 0.168 1.000 0.450

INTERCPT (a ) INDADE (a ) INDSMA (a ) INDSQU (a ) KPS (a ) SCALE () SHAPE ()

2.748 90.766 90.534 0.144 0.033 1.004 0.473

Variable

X *

p

0.719 0.286 0.264 0.291 0.005 0.009 0.009 0.216 0.185 0.071 0.223

9.143 7.034 5.059 0.266 46.443 0.845 0.001 0.171 0.823

0.003 0.008 0.025 0.606 0.000 0.358 0.980 0.679 0.364

0.396 0.280 0.258 0.280 0.005 0.070 0.206

48.247 7.492 4.284 0.264 45.497

0.000 0.006 0.039 0.608 0.000

obtained in a manner similar to that used in Examples 11.2 and 11.3. The hypothesis-testing procedure deﬁned in Section 11.2 can be used to test whether the coefﬁcients a , a , . . . , a are equal to zero. The ﬁrst part of Table 11.6 shows the results from SAS (where INTERCPT : a , SCALE : , and SHAPE : ). Table 11.6 shows that a , a , and a are signiﬁcantly (p 0.05) different from zero, whereas the other covariates are not (p 0.05). That is, only KPS and the type of cancer cell have signiﬁcant effects on the survival time. In particular, adeno cell carcinoma and small cell carcinoma have signiﬁcant negative effects on survival time. Patients who have better Karnofsky performance status have a longer survival time. If we wish to include only KPS and cell type in the model, the lower part of Table 11.6 gives the results. Assume that the coded data are saved in ‘‘C:LCANCER.DAT’’ as a text ﬁle with 10 numbers in a row, space-separated, which contains data for T, CENS, KPS, AGE, DIAGTIME, INDPRI, INDTHE, INDADE, INDSMA, and INDSQU, in that order. The SAS code used to obtain Table 11.6 is data w1; inﬁle ‘c:lcancer.dat’ missover; input t cens kps age diagtime indpri indthe indade indsma indsqu; run;

280

       

proc lifereg; Model 1: model t*cens(0) : kps age diagtime indpri indthe indade indsma indsqu / d : gamma; Model 2: model t*cens(0) : kps indade indsma indsqu / d : gamma; run;

11.7 LOG-LOGISTIC REGRESSION MODEL Assume that the relationship between the survival time T for individual i and G a set of covariates, x , . . . , x can be expressed by the AFT model in (11.4.1), N where has a logistic distribution with the density function G exp( ) g( ) : (11.7.1) [1 ; exp( )] and survivorship function G( ) :

1 1 ; exp( )

(11.7.2)

This model is the log-logistic regression model. Then T has the log-logistic distribution deﬁned in Section 6.5. The parameter in the distribution is a function of the covariates:

: exp 9 G G

:

1

(11.7.3)

Substituting (11.7.3) in the survivorship function in (6.5.2), we obtain log

S(t, b)

: 9log(tA) : 9 log t 1 9 S(t, b)

(11.7.4)

or S(t, b) a 1 N : ; a x 9 log t (11.7.5) I I 1 9 S(t, b) I where b : (a , a , . . . , a , ). Since S(t , b) is the probability of surviving longer N G than t, S(t , b)/[1 9 S(t , b)] is the odds of surviving longer than t. Let OR and G G G OR denote the odds of surviving longer than t for individuals i and j, H respectively. The logarithm of the odds ratio is log

log

OR 1 N G : a (x 9 x ) I IG IH OR I H

(11.7.6)

This ratio is independent of time. Therefore, the log-logistic regression model is a proportional odds model, not a proportional hazards model.

-  

281

Example 11.5 We ﬁt the log-logistic regression model above to the data in Example 11.6.1 using only KPS and the three cancer cell type index variables. That is, log T : a ; a KPS ; a INDADE ; a INDSMA ; a INDSQU ; G G G G G G (11.7.7) where the density function of is deﬁned in (11.7.1). Thus, G

: a ; a KPS ; a INDADE ; a INDSMA ; a INDSQU G G G G G

(11.7.8)

To estimate b : (a , a , . . . , a , ), we construct the log-likelihood function by using the and in (11.7.3) as parameters in the density and survivorship functions of the log-logistic distribution in Section 6.5. The resulting loglikelihood function for the 137 observed exact or right-censored survival times is

l(b) :

19 9 9 G 9 log ; G tN log t 9 2 log 1 ; exp G G

; 9log 1 ; exp

: 9

9 G t\N G

1 (a ; a KPS ; a INDADE ; a INDSMA ; a INDSQU ) G G G G

9 log ;

19 log t G

9 2 log 1 ; exp 9

1 (a ; a KPS ; a INDADE ; a INDSMA G G G

; a INDSQU ) tN G G

9 log 1 ; exp 9

1 (a ; a KPS ; a INDADE ; a INDSMA G G G

; a INDSQU ) tN G G

The ﬁrst term in the log-likelihood function sums over the uncensored observations, and the second sums over the right-censored observations. The MLE (a , . . . , a , a , ) of (a , . . . , a , a , ) are given in Table 11.7, with their

282

       

Table 11.7 Asymptotic Likelihood Inference on Lung Cancer Data Using a Log-Logistic Regression Model

Variable INTERCPT (a ) INDADE (a ) INDSMA (a ) INDSQU (a ) KPS (a ) SCALE ()

Regression Coefﬁcient

Standard Error

2.451 90.749 90.661 0.029 0.036 0.581

0.344 0.261 0.240 0.264 0.004 0.043

X *

p

exp(a /a) G

50.911 8.217 7.565 0.012 66.885 —

0.000 0.004 0.006 0.913 0.000 —

— 0.275 0.321 1.051 1.064 —

standard errors, likelihood ratio test statistics (X ), and p values. The results * are similar to those obtained from ﬁtting the general gamma regression model in Example 11.4. In addition, using (11.7.5) and (11.7.6), we can obtain odds ratios for the covariates. For example, let the odds of surviving to time t for four patients with the same KPS but different cell type (adeno, small, squamous and large) be denoted by OR , OR , OR , and OR , respectively; then the log-odds " 1+ 1/ * ratios of the individuals with adeno, small, and squamous cell types to the one with large cell type are, respectively, log

OR a " : OR *

log

OR a 1+ : OR *

log

OR a 1/ : OR *

Replacing a , a , a , and with their estimates, we have OR " : exp OR * OR 1+ : exp OR * OR 1/ : exp OR *

a : 0.275 a : 0.321 a : 1.051

These results mean that in lung cancer patients, persons with adeno and small cell type have odds of only about one-fourth and one-third, respectively, of those with large cell type. The odds of persons with large cell carcinoma are not signiﬁcantly different from those of patients with squamous cell carcinoma. Further, when ignoring cell type, exp(a /) represents an increase (or decrease) in the odds for any 1-unit increase in the KPS measure. In this case,

   

283

exp(a /) : 1.064; thus for a 1-unit increase in the KPS measure, the odds increase by 6.4%. The results are, in general, consistent with those obtained in Example 11.4. The following SAS code can be used to obtain the results in Table 11.7. data w1; inﬁle ‘c:lcancer.dat’ missover; input t cens kps age diagtime indpri indthe indade indsma indsqu; run; proc lifereg; model t*cens(0) : kps indade indsma indsqu / d : llogistic; run;

The following BMDP 2L code is also applicable. /input

/print /variable /form

/regress

ﬁle : ‘c:lcancer.dat’. variables : 10. format : free. level : brief. names : t, cens, kps, age, diagtime, indpri, indthe, indade, indsma, indsqu. time : t. status : cens. response : 1. covariates : kps, indade, indsma, indsqu. accel : llogistic.

/end

11.8 OTHER PARAMETRIC REGRESSION MODELS In this section we discuss two models in which the survival time T is assumed to follow the exponential distribution with density and survivorship functions as deﬁned in (6.1.1) and (6.1.3), respectively, and the mean survival time 1/ or hazard rate has the following linear relationship with the covariates: N 1 :a ; H G N Model 2: : a ; G H

Model 1:

ax H HG ax H HG

Model 1 is considered by Feigl and Zelen (1965) and extended to include censored data by Zippin and Armitage (1966). Model 2 is used by Byar et al. (1974).

284

       

Model 1 Suppose that n patients are entered in a study; r of these die and s : n 9 r are still alive at the end of the study. Let t , . . . , t be the exact survival times of P the r deaths and t>, . . . , t> be the s censoring times. Furthermore, let x , Q HG i : 1, . . . , n, j : 1, . . . , p, be the observed value of the j th covariate of the ith patient. The model assumes that the mean survival time is linearly related to the covariates: 1 N N :a ; a x : a x H HG H HG G H H

(11.8.1)

where x Y 1. The term a represents the underlying hazard in the sense that G 1/a is the hazard rate when covariates are ignored or all x ’s are zero. Then G HG the likelihood function of the n survival times under the model (11.8.1) can be written as

P N \ N \ L (a , a , . . . , a ) : a x exp 9t a x N H HG G H HG G H H Q N \ ; exp 9t> a x I H HI I H

(11.8.2)

The log-likelihood is then

P N P N \ l(a , a , . . . , a ) : 9 log a x 9 t a x N H HG G H HG G G H H P N \ 9 t> a x (11.8.3) I H HI I H The maximum likelihood estimates of a , j : 0, 1, . . . , p , may be obtained H H by solving simultaneously the p ; 1 equations:

N P N \ Q N \ P ; t> a x :0 9 a x ; t a x I H HG H HG H HI G G H I H G H P N \ P N \ 9 x ax ; tx ax H HG G HG H HG HG H G H G Q N \ ; t> x ax :0 j : 1, . . . , p I HI H HI I H (11.8.4)

Again, this can be done by Newton—Raphson iterative procedures described in Section 7.1.

   

285

After obtaining the MLE, a , j : 0, 1, . . . , p, the log-likelihood function can H be used to test the signiﬁcance of the covariates. The procedure is exactly the same as those used in Example 11.1. The survivorship function (for the ith patient) adjusted for the covariates can be obtained from S (t) : exp(9 t) G G

: exp 9t

N \ a x H HG H

(11.8.5)

Model 2 Byar et al. (1974) developed another exponential model relating survival time to concomitant information for prostate cancer patients in which the individual hazard is linearly related to the possible prognostic variables: N N :a ; a x : a x G H HG H HG H H

(11.8.6)

where x : 1. Similar to the model of Feigl and Zelen (1965), a is the G underlying hazard rate when covariates are ignored, force of mortality or the intercept. Suppose that r of the n patients are dead and s : n 9 r are still alive at the end of the study; then the likelihood function is

N N P L (a , a , . . . , a ) : a x exp 9 a x t H HG H HG G N G H H Q N ; exp 9 a x t> H HI I I H

(11.8.7)

Taking the logarithms of (11.8.7), we obtain the log-likelihood function

P N N Q N l(a , a , . . . , a ) : log a x 9 a x t 9 a x t> N H HG H HG G H HI I G H H I H (11.8.8) To obtain the MLEs of the a ’s, we need to solve simultaneously the following H p ; 1 equations:

x Q P HG 9 x t 9 x t> : 0 HG G HI I N a x H H HG G I

j : 0, 1, . . . , p

(11.8.9)

286

       

These equations can be solved simultaneously by using the Newton—Raphson iterative procedure. After the MLEs of a , j : 0, 1, . . . , p, are obtained, the log-likelihood H function can be used to test the signiﬁcance of the covariates by following the same procedure as that used in Example 11.1. The survivorship function for the ith individual adjusted for the covariates can be estimated from S (t) : exp(9 t) G G

N : exp 9t a x H HG H

(11.8.10)

11.9 MODEL SELECTION METHODS To identify important risk factors using a parametric approach, one needs to select a most appropriate parametric model and identify the most signiﬁcant subset of covariates. In this section we ﬁrst discuss, for a given parametric model, how to choose an optimal subset of the covariates that have statistically signiﬁcant effects on the survival time. Second, we consider if the signiﬁcant covariates are known, how to determine which parametric model is most appropriate. Third, we discuss a method that can be used to compare among parametric models with different subsets of covariates. 11.9.1 Selection of Most Signiﬁcant Covariates for a Known Parametric Model For a known parametric model, the following methods can be used to select an optimal subset of the covariates in the sense that the subset selected has the most statistically signiﬁcant effects on the survival time among all subsets of the covariates. These methods include the forward, backward, stepwise, AIC, and BIC selection procedures commonly used in ordinary regression analyses. We give only a brief outline here. Interested readers are referred to books on ordinary regression analysis. Forward Selection Procedure The forward selection procedure is an adding process in which one covariate is selected and added to the model at every step. First, we have to estimate the speciﬁc parameters that deﬁne the parametric model and the coefﬁcients of the adjusting covariates, if any, that are forced into the model. For example, to have age- and gender-adjusted results, age and gender must be included in the model, whether or not they are signiﬁcant. Then the adjusted chi-square statistics for each covariate not in the model are computed and the largest of these statistics is identiﬁed. If the largest chi-square statistic is signiﬁcant at the

  

287

level speciﬁed (usually, : 0.15) for entry, the corresponding covariate is added to the model. Let a be the vector of the parameters or coefﬁcients of covariates already in the model and l( · ) be the log-likelihood function. The forward selection procedure will select x , which is not yet in the model, to enter the model if the H difference between the log-likelihood values with x and without x is largest H H among all the x ’s that are not in the model. That is, the coefﬁcient a of x I H H satisﬁes X : 2[(l(a , a ) 9 l(a (0))] * H H : max 2[l(a , a ) 9 l(a (0))], for any x that is not in the model I I I I (11.9.1) and X where a is the coefﬁcient of x not yet in the model, (a , a ), is ? I I I * the MLE of (a , a ), a (0) is the MLE of a given a : 0, and is the -level ? I I I critical point of the chi-square distribution with 1 degree of freedom. In the forward selection procedure, once a covariate is entered into the model, it will never be removed. The process is repeated until none of the remaining covariates meet the level speciﬁed for entry or until a predetermined number of covariates have been entered. Backward Selection Procedure The backward selection procedure is an elimination process in which all the covariates are included in the model at the beginning and are removed one by one according to a signiﬁcance criterion. The speciﬁc parameters that deﬁne the parametric model and the coefﬁcients of all the covariates are estimated ﬁrst. Then the Wald test is used to examine each covariate. The least signiﬁcant covariate that does not meet the speciﬁed level (usually, : 0.15) for staying in the model is removed. That is, covariate x will be removed from the H model if

a a X : H : min I for any x that is in the model 5 v I v HH II I

(11.9.2)

and X where a is the corresponding coefﬁcient for x and v is the ? HH 5 H H estimated variance of a . In the backward selection procedure, once a covariate H is removed from the model, it remains excluded. The process is repeated until all the covariates remained in the model meet the speciﬁed signiﬁcance level for staying or until a predetermined number of covariates remain in the model. The advantages of the backward procedure have been discussed by Mantel (1970).

288

       

Stepwise Selection Procedure The stepwise selection procedure is a combination of forward and backward selection procedures. At ﬁrst, it is similar to the forward selection procedure; however, covariates already in the model do not necessarily remain. Covariates already in the model may be removed later if they are no longer signiﬁcant. The stepwise selection process terminates if no signiﬁcant covariate can be added to the model or if the covariate just entered into the model is removed and no more covariates can be added. Information Criterion (AIC and BIC) Procedures The Baysian information criterion (BIC) selection procedure discussed in Section 9.3 can be used to select the best parametric model with covariates. This can be done easily by replacing the log-likelihood function l(b ) in (9.3.1) with the log-likelihood function with subsets of covariates deﬁned in previous sections of this chapter. The subset of covariates that produces the largest r value in (9.3.1) among all possible subsets is the choice. If the number of covariates is large, one may apply the forward, backward, and stepwise selection method ﬁrst to reduce the number of candidate covariates, then use the BIC procedure. The AIC criterion can be applied in a similar manner. 11.9.2 Selection of a Parametric Model with a Fixed Subset of Covariates If the most signiﬁcant subset of covariates is known, selection of an appropriate parametric model can be carried out by using a procedure similar to those based on the likelihood functions and discussed in Section 9.2. The procedures are exactly the same except that all the likelihood functions are replaced by those with covariates, for example, those given in (11.3.10) and Examples 11.2 and 11.5. With computer software packages available commercially, the procedure can easily be applied. The following example illustrates the application. Example 11.6 Consider the lung cancer patients who did not receive any prior therapy in Example 11.4. Assume that the three covariates KPS, INDADE, and INDSMA are most signiﬁcant. For these three ﬁxed covariates, the log-likelihood values based on the exponential, Weibull, lognormal, loglogistic, and generalized gamma models are given in Table 11.8. From this table, the lognormal, Weibull and exponential models (relative to the generalized gamma model), with the three covariates, are rejected at : 0.0325, 0.016 and 0.024, respectively. It appears that the exponential model, relative to the Weibull, is not rejected (p : 0.194). However, since the exponential model belongs to the Weibull distribution family and the Weibull model has been rejected, the exponential model with the three covariates is not appropriate for the data, as noted earlier in Chapter 9. Thus, we conclude that none of the three models (exponential, Weibull, and lognormal), with covariates, provide an appropriate ﬁt to the data. In Example 11.7 we will see that the log-logistic model is the best ﬁt among all these models.

  

289

Table 11.8 Goodness-of-Fit Tests Based on Asymptotic Likelihood Inference on Lung Cancer Data Distribution Extended generalized gamma Log-logistic Lognormal Weibull Exponential Exponential

LL?

LLR?

p?

BIC

AIC

9132.793

—

—

9146.517

9144.793

9131.230 9135.022 9135.669 9136.512 9136.512

— 4.459@ 5.752A 7.438B 1.686C

— 0.035 0.016 0.024 0.194

9142.667 9146.459 9147.106 9145.661 —

9141.230 9145.022 9145.669 9144.512 —

? LL, log-likelihood; LLR, log-likelihood ratio statistic; p, probability that the respective chi-square random variable LLR. @ Lognormal relative to extended generalized gamma. A Weibull relative to extended generalized gamma. B Exponential relative to extended generalized gamma. C Exponential relative to Weibull.

Using the data ﬁle ‘‘C:LCANCER.DAT’’ described in Example 11.4, the following SAS code can be used to obtain Table 11.8. data w1; inﬁle ‘c:lcancer.dat’ missover; input t cens kps age diagtime indpri indthe indade indsma indsqu; if indpri : 0; run; proc lifereg; Model 1: model t*cens(0) : kps indade indsma / d : exponential; Model 2: model t*cens(0) : kps indade indsma / d : weibull; Model 3: model t*cens(0) : kps indade indsma / d : lnormal; Model 4: model t*cens(0) : kps indade indsma / d : gamma; Model 5: model t*cens(0) : kps indade indsma / d : llogistic; run;

11.9.3 Selection of a Parametric Model and an Optimal Subset of Covariates Simultaneously: AIC and BIC Procedures The extended AIC and BIC criteria, which include covariates, can be applied not only to select the most signiﬁcant covariates for a given parametric model, but also, simultaneously, to select the best parametric model. The procedure may be tedious if the number of covariates to be considered is large. However, in practice, the number of covariates worthy of consideration in a model is usually reduced after univariate analyses, as described in Section 11.1. Therefore, the AIC or BIC procedure may not be too difﬁcult to apply. With the aid of software packages, we can apply the forward, backward, and stepwise

       

290

selection methods in Section 11.9.1 ﬁrst to ﬁt different parametric regression models to the data and then include in the AIC or BIC procedure all or a subset of the signiﬁcant covariates identiﬁed in each ﬁt. Example 11.7 Consider the lung cancer data of Example 11.6. We apply the methods of Section 11.9.1 to select the best subset of covariates separately for the exponential, Weibull, lognormal, log-logistic, and generalized gamma models. The same three covariates (KPS, INDADE, and INDSMA) are selected (at the 0.05 level) as the most signiﬁcant covariates in every of these parametric models. The last column of Table 11.8 gives the r values of the BIC for the different parametric models with the same three covariates. Based on these values, the log-logistic model with the three covariates should be selected as the ﬁnal model for the data since its BIC or AIC value is the largest among all the models. However, it is not known if the log-logistic model is signiﬁcantly better than the other models. 11.9.4 Cox--Snell Residual Procedure with Covariates The AFT models in Sections 11.2 to 11.7 assume the following linear relationship between log T and the p covariates: N log T : a ; a x ; : ; (11.9.3) G I IG G G G I where has survival function G( ). Once a speciﬁed parametric model and a G subset of covariates are selected, to assess the goodness of ﬁt of this model, one approach is to compute the regression residuals : G

log t 9 G G

i : 1, 2, . . . , n

(11.9.4)

where N

: a ; a x G I IG I and a , a , a , . . . , a and are the MLE of a , a , a , . . . , a and , respectively, N N and t ’s are observed survival times. An is taken as censored if the G G corresponding t is censored. If the model ﬁtted is correct, the corresponding G survival function G( ) is the survival function of the ﬁtted model. For example, if T indeed follows the log-logistic regression model with a selected subset of covariates, the corresponding ’s should follow the log-logistic distribution. G Moreover, if the ﬁtted model is correct, the Cox—Snell residuals deﬁned in (8.4.1) are r : 9log G( ; d ) : 9log G G G

log t 9 G G ; d

i : 1, 2, . . . , n

(11.9.5)

  

291

Figure 11.2 Cox—Snell residuals plot from the ﬁtted exponential model on lung cancer data.

where d is the MLE of the parameters of the distribution. Let S (r) denote the estimated survival function of r ’s. From Section 8.4, the graph of r versus G G 9log S (r ), i : 1, 2, . . . , n, should be closed to a straight line with unit slope G and zero intercept if the ﬁtted model for the survival time T is correct. This graphical method can be used to assess the goodness of ﬁt of the parametric regression model.

Example 11.8 Figures 11.2 to 11.6 show the Cox—Snell residuals plots from ﬁtting the exponential, Weibull, lognormal, log-logistic, and extended generalized gamma models, respectively with the three covariates KPS, INDADE, and INDSMA, to the lung cancer data in Example 11.6. The ﬁve graphs look similar, and all are close to a straight line with unit slope and zero intercept. No signiﬁcant differences are observed in these graphs. The results obtained are similar to those from Examples 11.6 and 11.7. The differences among the ﬁve distributions are small with the log-logistic distribution being slightly better than the others. Using the same data ﬁle ‘‘C:LCANCER.DAT’’ as in Example 11.6.1, the following SAS code can be used to obtain the Cox—Snell residuals based on the exponential, Weibull, lognormal, log-logistic, and generalized gamma model with the three covariates, KPS, INDADE, and INDSMA.

292

       

Figure 11.3 Cox—Snell residuals plot from the ﬁtted Weibull model on lung cancer data.

Figure 11.4 Cox—Snell residuals plot from the ﬁtted lognormal model on lung cancer data.

  

293

Figure 11.5 Cox—Snell residuals plot from the ﬁtted log-logistic model on lung cancer data.

data w1; inﬁle ‘c:lcancer.dat’ missover; input t cens kps age diagtime indpri indthe indade indsma indsqu; if indpri : 0; run; proc lifereg noprint; a: model t*cens(0) : kps indade indsma / d : exponential; output out : wa cdf : f; b: model t*cens(0) : kps indade indsma / d : weibull; output out : wb cdf : f; c: model t*cens(0) : kps indade indsma / d : lnormal; output out : wc cdf : f; d: model t*cens(0) : kps indade indsma / d : gamma; output out : wd cdf : f; e: model t*cens(0) : kps indade indsma / d : llogistic; output out : we cdf : f; run; data wa; set wa; model : ‘Exponential’; data wb;

294

       

Figure 11.6 Cox—Snell residuals plot from the ﬁtted extended generalized gamma model on lung cancer data.

set wb; model : ‘Weibull’; data wc; set wc; model : ‘LNnormal’; data wd; set wd; model : ‘Gamma’; data we; set we; model : ‘LLogistic’; data w2; set wa wb wc wd we; rcs :9log(1 9 f); run; proc sort; by model; run; proc lifetest notable outs : ws noprint; time rcs*cens(0); by model ;



295

run; data ws; set ws; mls :9log(survival); run; title ‘Cox-Snell Residuals (rcs) and -log(estimated survival function of rcs) (mls)’; proc print data : ws; var model rcs mls; run;

Bibliographical Remarks An excellent expository paper on statistical methods for the identiﬁcation and use of prognostic factors has been written by Armitage and Gehan (1974). Many studies of prognostic factors have been published, including Sirott et al. (1993), Brancato et al. (1997), Linka et al. (1998), and Lassarre (2001). The accelerated failure time (AFT) model was introduced by Cox (1972). The detailed statistical inference of the AFT models and the theoretical aspects of model-selecting methods are included in the works cited in the bibliographical remarks at the end of Chapter 9 and in the papers and books cited in this chapter.

EXERCISES 11.1

Consider the data given in Exercise Table 3.1. In addition to the ﬁve skin tests, age and gender may also have prognostic value. Examine the relationship between survival and each of the seven possible prognostic variables as in Table 3.12. For each variable, group the patients according to different cutoff points. Estimate and draw the survival function for each subgroup by the product-limit method and then use the methods discussed in Chapter 5 to compare survival distributions of the subgroups. Prepare a table similar to Table 3.12. Interpret your results. Is there a subgroup of any variable that shows signiﬁcantly longer survival times? (For the skin test results, use the larger diameter of the two.)

11.2

Consider the seven variables in Exercise 11.1. Use the Weibull regression model to identify the most signiﬁcant variables. Compare your results with that obtained in Exercise 11.1.

11.3

Consider the data given in Exercise Table 3.3. Examine the relationship between remission duration and survival time and each of the nine possible prognostic variables: age, gender, family history of melanoma, and the six skin tests. Group the patients according to different cutoff

296

        points. Estimate and draw remission and survival curves for each subgroup. Compare the remission and survival distributions of subgroups using the methods discussed in Chapter 5. Prepare tables similar to Table 3.8.

11.4

Perform the following analyses: (1) Use the exponential, Weibull, lognormal, generalized gamma, or log-logistic regression models separately to identify the signiﬁcant variables in Exercise 11.3 for their relative importance to remission duration and survival time. (2) Select a model among these ﬁnal models using the BIC or AIC method. (3) Calculate separately the respective likelihood for the exponential, Weibull, lognormal, or generalized gamma regression model with the ﬁxed variables in the model selected in step (2), then use the method in Section 11.9.2 to choose a model and see whether this model is the model selected in step (2).

11.5

Perform the same analyses as in Exercise 11.4 for survival time in the 157 diabetic patients given in Exercise Table 3.4.

11.6

Using the notations in Example 11.2, show that if we use the following model to replace the model deﬁned in (11.4.6), log T : a G ; a LOW ; a UNSA ; : ; , the hypothesis H : h : h is Q S equivalent to H : a : 0.

11.7

Following Examples 11.2 and 11.3, obtain the log-likelihood function based on (11.6.8) for the 137 observed exact and right-censored survival times from the lung cancer patients.

11.8

Using the same notation as in Example 11.5, show that if we use the model log T : a ; a KPS ; a INDLAR ; a INDSMA G G G G ;a INDSQU ; , where INDLAR : 1 if the type of cancer is large, G G and 0 otherwise, to replace the model deﬁned in (11.7.8), the hypotheses H : a :0 and H : a : 0 are equivalent to H : OR :OR and 1+ " H : OR : OR , respectively. Moreover, if we use the model 1/ " log T : a ; a KPS ; a INDLAR ; a INDADE ; a INDSQU G G G G G ; to replace the model deﬁned in (11.7.8), the hypothesis H : a : 0 G is equivalent to H : OR : OR . 1/ 1+

11.9

Let be a survival time with the density function g( ):exp[ 9exp( )]. Show that the survival time T deﬁned by log T : ; has the Weibull distribution with : exp(9 /) and : 1/ by applying the density transformation rule in (11.2.11).

11.10 Let be a survival time with the standard normal distribution N(0, 1). Show that the survival time T deﬁned by log T : ; has the lognormal distribution by applying the density transformation rule in (11.2.11).



297

11.11 Let u be a survival time with the density function f (u), f (u) :

exp[u/ 9 exp(u)] (1/)

where ( · ) is the gamma function deﬁned in (6.2.8). (a) Show that the survival time deﬁned by : / ; (log )/ has the following density function, g( ) :

[exp( )/]B exp[9exp( )/] (1/)

9- ;-

and survival function,

G( ) :

I

exp( ) 1 ,

19I

if 0

exp( ) 1 ,

if 0

where I( · , · ) is the incomplete gamma function deﬁned as in (6.4.4). (b) Show that the survival time T deﬁned by log T : ; has the extended gamma density function deﬁned in (11.6.4). 11.12 If has a logistic distribution with the density function g( ) :

exp( ) [1 ; exp( )]

show that the survival time T deﬁned by log T : ; has the log-logistic distribution with : exp(9 /) and : 1/ by applying the density transformation rule in (11.2.11).

Statistical Methods for Survival Data Analysis. Elisa T. Lee and John Wenyu Wang Copyright ¶ 2003 John Wiley & Sons, Inc. ISBN: 0-471-36999-7

C H A P T E R 12

Identiﬁcation of Prognostic Factors Related to Survival Time: Cox Proportional Hazards Model

In Chapter 11 we discussed parametric survival methods for model ﬁtting and for identifying signiﬁcant prognostic factors. These methods are powerful if the underlying survival distribution is known. The estimation and hypothesis testing of parameters in the models can be conducted by applying standard asymptotic likelihood techniques. However, in practice, the exact form of the underlying survival distribution is usually unknown and we may not be able to ﬁnd an appropriate model. Therefore, the use of parametric methods in identifying signiﬁcant prognostic factors is somewhat limited. In this chapter we discuss a most commonly used model, the Cox (1972) proportional hazards model, and its related statistical inference. This model does not require knowledge of the underlying distribution. The hazard function in this model can take on any form, including that of a step function, but the hazard functions of different individuals are assumed to be proportional and independent of time. The usual likelihood function is replaced by the partial likelihood function. The important fact is that the statistical inference based on the partial likelihood function is similar to that based on the likelihood function.

12.1 PARTIAL LIKELIHOOD FUNCTION FOR SURVIVAL TIMES

The Cox proportional hazards model possesses the property that different individuals have hazard functions that are proportional, i.e., [h(t x )/h(t x )], the ratio of the hazard functions for two individuals with prognostic factors or covariates x : (x , x , . . . , x ), and x : (x , x , . . . , x ) is a constant N N (does not vary with time t). This means that the ratio of the risk of dying of two individuals is the same no matter how long they survive. In Sections 11.3 298

     

299

and 11.4, we showed that the exponential and Weibull regression models possess this property. This property implies that the hazard function given a set of covariates x : (x , x , . . . , x ) can be written as a function of an N underlying hazard function and a function, say g(x , . . . , x ), of only the N covariates, that is, h(t x , . . . , x ) : h (t)g(x , . . . , x ) N N

or h(t x) : h (t)g(x)

(12.1.1)

The underlying hazard function, h (t), represents how the risk changes with time, and g(x) represents the effect of covariates. h (t) can be interpreted as the hazard function when all covariates are ignored or when g(x) : 1, and is also called the baseline hazard function. The hazard ratio of two individuals with different covariates x and x is h(t x ) h (t)g(x ) g(x ) : : h(t x ) h (t)g(x ) g(x )

(12.1.2)

which is a constant, independent of time. The Cox (1972) proportional hazard model assumes that g(x) in (12.1.1) is an exponential function of the covariates, that is, g(x) : exp

N b x : exp(bx) H H H

and the hazard function is h(t x) : h (t) exp

N b x : h (t) exp(bx) H H H

(12.1.3)

where b : (b , . . . , b ) denotes the coefﬁcients of covariates. These coefﬁcients N can be estimated from the data observed and indicate the magnitude of the effects of their corresponding covariates. For example, if there is only one covariate treatment, let x : 0 if a person receives placebo and x : 1 if a person receives the experimental drug. The hazard ratio of the patient receiving the experimental drug and the one receiving placebo based on (12.1.2) and (12.1.3) is h(t x : 1) : exp(b ) h(t x : 0) Thus, the two treatments are equally effective if b : 0 and the experimental drug introduces lower (higher) risk for survival than placebo if b 0 (b 0). It can be shown that (12.1.3) is equivalent to S(t x) : [S (t)] exp(NH bH xH ) : [S (t)] exp(bx)

(12.1.4)

300

       

Thus the covariates can be incorporated into the survivorship function. The use of (12.1.3) can be exempliﬁed as follows. 1. Two-sample problems. Suppose that p : 1; that is, there is only one covariate, x , which is an indicator variable:

0 x : G 1

if the ith individual is from group 0 if the ith individual is from group 1

Then according to (12.1.3), the hazard functions of groups 0 and 1 are, respectively, h (t) and h (t) : h (t) exp(b ). The hazard function of group 1 is equal to the hazard function of group 0 multiplied by a constant exp(b ), or the two hazard functions are proportional. In terms of the survivorship function, S(t) : [S (t)]A where the constant c : exp(b ) (Nadas, 1970). The two-sample test develop ed from (12.1.3) is the Cox—Mantel test discussed in Chapter 5. It is now apparent that the test is based on the assumption of a proportional hazard between the two groups. 2. Two-sample problems with covariates. The covariates in (12.1.3) can either be indicator variables such as x in the two-group problem above or prognostic factors. Having one or more covariates representing prognostic factors in (12.1.1) enables us to examine the relation between two groups, adjusting for the presence of prognostic factors. 3. Regression problems. Dividing both sides of (12.1.3) by h (t) and taking its logarithm, we obtain N h (t) log G : b x ; b x ; % ; b x : b x : bx G G N NG H HG G h (t) H

(12.1.5)

where the x’s are covariates for the ith individual. The left side of (12.1.5) is a function of hazard ratio (or relative risk) and the right side is a linear function of the covariates and their respective coefﬁcients. As mentioned earlier, h (t) is the hazard function when all covariates are ignored. If the covariates are standardized about the mean and the model used is h (t) log G : b (x 9 x ) ; b (x 9 x ) ; % ; b (x 9 x ) : b(x 9 x ) G G N NG N G h (t) (12.1.6)

     

301

where x : (x , x , . . . , x ) and x is the average of the jth covariate for all N H patients, the left side of (12.1.6) is the logarithm of the ratio of risk of failure for a patient with a given set of values x : (x , x , . . . , x ) to that for an G G G NG average patient who has an average value for every covariate. In this chapter we focus on the use of (12.1.5), and the main interest here is to identify important prognostic factors. In other words, we wish to identify from the p covariates a subset of variables that affect the hazard more signiﬁcantly, and consequently, the length of survival of the patient. We are concerned with the regression coefﬁcients. If b is zero, the corresponding G covariate is not related to survival. If b is not zero, it represents the magnitude G of the effect of x on hazard when the other covariates are considered G simultaneously. To estimate the coefﬁcients, b , . . . , b , Cox (1972) proposes a partial N likelihood function based on a conditional probability of failure, assuming that there are no tied values in the survival times. However, in practice, tied survival times are commonly observed and Cox’s partial likelihood function was modiﬁed to handle ties (Kalbﬂeisch and Prentice, 1980; Breslow, 1974; Efron, 1977). In the following we describe the estimation procedure without and with ties. 12.1.1 Estimation Procedures without Tied Survival Times Suppose that k of the survival times from n individuals are uncensored and distinct, and n 9 k are right-censored. Let t t % t be the ordered I k distinct failure times with corresponding covariates x , x , . . . , x . Let I R(t ) be the risk set at time t . R(t ) consists of all persons whose survival G G G times are at least t . For the particular failure at time t , conditionally on the G G risk set R(t ), the probability that the failure is on the individual as observed is G expN b x H H HG l + R(t ) expN b x ) G H H HJ

:

exp(bx ) G ) exp(bx ) G J

l + R(t

Each failure contributes a factor and hence the partial likelihood function is I L (b) :

G

expN b x H H HG bx ) ) exp N G H H HJ

l + R(t

I exp(bx ) G :

l + R(t ) exp(bx ) G G J

(12.1.7)

and the log-partial likelihood is

I N I l(b) : log L (b) : b x 9 log H HG G H G I : bx 9 log exp(bx ) G J l + R(t ) G G

exp

l + R(t ) G

N bx H HJ H

(12.1.8)

302

       

The maximum partial likelihood estimator (MPLE) b of b can be obtained by the steps shown in (7.1.2)—(7.1.4). That is, b , . . . , b are obtained by solving N the following simultaneous equations: (l(b)) :0 b or I l(b) : [x 9 A (b)] : 0 SG SG b G S

u : 1, 2, . . . , p

(12.1.9)

where A (b) : SG

x expN b x ) l + R(t ) x exp(bx ) G H H HJ : SJ SJ J l + R(t ) expN b x l + R(t ) exp(bx ) G G H H HJ J

l + R(t

) G

(12.1.10)

by applying the Newton—Raphson iterated procedure. The second partial derivatives of l(b) with respective to b and b , u, v : 1, 2, . . . , p, in the S T Newton—Raphson iterative procedure are l(b) I I I (b) : : 9 C (b , . . . , b ) : 9 C (b) STG ST N STG b b S T G G

u, v : 1, 2, . . . , p (12.1.11)

where C (b) : STG

x x expN b x ) H H HJ 9 A (b)A (b) SJ TJ l + R(t ) expN b x ) SG TG G H H HJ

l + R(t

) G

(12.1.12)

The covariance matrix of the MPLE b , deﬁned similarly as V (b) deﬁned in (7.1.5), is

(b ) : 9 V (b ) : Cov

l(b ) \ b b

(12.1.13)

where 9 l(b )/ b b is called the observed information matrix with 9I (b ) as ST its (u, v) element and where I (b) is deﬁned in (12.1.11). Let the (i, j) element ST of V (b ) in (12.1.13) be v ; then the 100(1 9 )% conﬁdence interval for b is, GH G according to (7.1.6), b 9 Z (v , b ; Z (v ? ? GG G GG G

(12.1.14)

12.1.2 Estimation Procedure with Tied Survival Times Suppose that among the n observed survival times there are k distinct uncensored times t t % t . Let m denote the number of people I G

     

303

who fail at t or the multiplicity of t ; m 1 if there are more than one G G G observation with value t ; m : 1 if there is only one observation with value G G t . Let R(t ) denote the set of people at risk at time t [i.e., R(t ) consists of G G G G those whose survival times are at least t ] and r be the number of such G G persons. For example, in the following set of survival times from eight subjects, 15, 16;, 20, 20, 20, 21, 24, 24, n : 8, k : 4, t : 15, t : 20, t : 21, t : 24, m : 1, m : 3, m : 1, and m : 2. Then R(t ) includes all eight subjects. R(t ) : those subjects with survival times 20, 21, and 24, R(t ) : those subjects with survival times 21 and 24, and R(t ) : those subjects with survival time 24; thus, r : 8, r : 6, r : 3, and r : 2. To discuss the methods for ties, we introduce a few additional notations. From every R(t ), we can randomly select m subjects. Donate each of these G G m selections by u . There are C : r !/[m ! (r 9 m )!] possible u ’s. Let G H PG KG G G G G H U denote the set that contains all the u ’s. For example, from R(t ), we can G H randomly select any m : 3 out of the 6 (r : 6) subjects. There are a total of C : 20 such selections (or subsets), and one of u ’s is, for example, three H subjects with survival times 20, 20, and 24. U : u , u , . . . , u contains all 20 subsets. Now let us focus on the tied observations. Let x : (x , x , . . . , x ) denote the covariates of the kth individual, I I I NI zu(j) : k + u x : (z 1u(j) , z2u(j) , . . . , zpu(j) ), where zlu(j) is the sum of the lth covariate H I of the m persons who are in u . Let u* denotes the set of m people who G G H G failed at time t , and zu*(i) : k + u* x : (z *1u*(i) , z*2u*(i) , . . . , z*pu*(i) ), where z*lu*(i) be G I G the sum of the lth covariate of the m persons who are in u* (failed at time G G t ). For example, for the set of survival times above, z*1u*(2) equals the sum of G the ﬁrst covariate values of three persons who failed at time 20. With these notations we are ready to introduce the following method for ties. Continuous Time Scale In the case of a continuous time scale, for the m persons failing at t , it is G G reasonable to say that the survival times of the m people are not identical G since the ties are most likely to be the results of imprecise measurements. If the precise measurements could be made, these m survival times could be ordered G and we could use the likelihood function in (12.1.7). In the absence of knowledge of the true order (the real case), we have to consider all possible orders of these observed m tied survival times. For each t , the observed m G G G tied survival time can be ordered in m ! (m factorial) different possible ways. G G For each of these possible orders we will have a product as in (12.1.7) for the corresponding m survival times. Therefore, when the survival time is measG ured at a continuous time scale, construction and computation of the exact partial likelihood function is a very tedious task if m is larger. Readers G interested in the details of the exact partial likelihood function are referred to Kalbﬂeisch and Prentice (1980) and Delong et al. (1994). The formula provided by Delong et al. makes computation of the partial likelihood function for tied continuous survival times more feasible. We will not discuss the exact partial likelihood function further due to its complexity. Among the statistical sof-

304

       

tware packages, SAS includes a procedure based on the exact partial likelihood function. Use of this procedure is illustrated in Example 12.3. To approximate the exact partial likelihood function, the following two likelihood functions can be used when each m is small compared to r . G G Breslow (1974) provided the following approximation: I exp(zu*(i) b) L (b) :

[ exp(x b)] mG J G l + R(t G)

(12.1.15)

An alternative approximation was provided by Efron (1977): b) I exp(zu*(i) L (b) :

#

KG [l + R(t ) exp(x b) 9 [( j 9 1)/m ] G J G H G

l + u*

G

exp(x b)] J

(12.1.16)

Discrete Time Scale If survival times are observed at discrete times, the tied observations are true ties: that is, these events really happen at the same time. Cox (1972) proposed the following logistic model:

h (t) dt h (t) dt N h (t) dt G : exp b x : exp(bx ) H HG G 1 9 h (t) dt 1 9 h (t) dt 1 9 h (t) dt G H This model reduces to (12.1.3) in the continuous time scale. Using the model and replacing the ith term in (12.1.7) with the following term with tied observations at t : G u

b) exp(zu*(i) u(j) b) exp(z +U

H

G

the partial likelihood function with tied observations at a discrete time scale is I L (d) :

B G

exp(zu*(i) b) u + U exp(z b) H G SH

(12.1.17)

The ith term in this expression represents the conditional probability of observing the m failures given that there are m failures at time t and the G G G risk set R(t ) at t . The number of terms in the denominator of the ith term G G is C : r !/[m ! (r 9 m )!], as noted earlier, and will be very large if the m PG KG G G G G G is large. Fortunately, a recursive algorithm proposed by Gail et al. (1981) makes the calculation manageable. Equation (12.1.17) can also be considered as an approximation of the partial likelihood function for continuous survival times with ties by assuming that the ties are true as if they were observed at a discrete time scale.

     

305

As shown in many papers in literature, in most practical situations, the three partial likelihood functions above are reasonably good approximations of the exact partial likelihood function for continuous survival time with ties. When there are no ties on the event times (i.e., m Y 1), (12.1.15) —(12.1.17) reduce to G (12.1.7). The maximum partial likelihood estimate of b in (12.1.15)—(12.1.17) can be estimated using procedures similar to those in (12.1.8)—(12.1.14). Once the coefﬁcients are estimated, relative risk (or relative hazard) in (12.1.2) or (12.1.5) can be obtained. For example, if x represents hypertension and is deﬁned as

1 x : 0

if patient is hypertensive otherwise

the hazard rate for hypertensive patients is exp(b ) times that for normotensive patients. That is, the risk associated with hypertension is exp(b ) adjusting for the other covariates in the model. A 100(1 9 )% conﬁdence interval for the relative risk can be obtained by using the conﬁdence interval for b . Let (b , b ) be the 100(1 9 )% conﬁdence interval for b ; a 100(1 9 )% * 3 conﬁdence interval for the relative risk is (exp(b ), exp(b )) according to * 3 (7.1.8). This application of the proportional hazards model has been used extensively, particularly by epidemiologists. The following three examples illustrate the use of Cox’s regression model. Example 12.1 Consider the survival data from 30 patients with AML in Table 11.4. Recall that the two possible prognostic factors are

1 x : 0

1 x : 0

if patient is 50 years otherwise if cellularity of marrow clot section is 100% otherwise

We ﬁt the Cox proportional hazard model to the data. The results are presented in Table 12.1 In this case, Breslow’s approximation in (12.1.15) is used to handle ties. The positive signs of the regression coefﬁcients indicate that the older patients (50 years) and patients with 100% cellularity of the marrow clot section have a higher risk of dying. Furthermore, age is signiﬁcantly related to survival after adjustment for cellularity. The results are consistent with those from ﬁtting the lognormal regression model in Example 11.3. The coefﬁcients of the binary covariates can be interpreted in terms of relative risk. The estimated risk of dying for patients at least 50 years of age is 2.75 times higher than that for patients younger than 50. Patients with 100% cellularity have a 42% higher risk of dying than patients with less than 100% cellularity.

306

       

Table 12.1 Results of a Proportional Hazards Regression Analysis of Data in Table 11.4

Covariate x (age) x (cellularity)

Regression Coefﬁcient

Standard Error

p Value

exp(coefﬁcient)

1.01 0.35

0.46 0.44

0013 0.212

2.75 1.42

The 95% conﬁdence intervals for b (age) and b (cellularity) are 1.01 < 1.96 (0.46) or (0.11, 1.91) and 0.35 < 1.96 (0.44) or (90.51, 1.21), respectively. Consequently, the 95% conﬁdence intervals for the relative risks are (e , e ) or (1.12, 6.75) and (e\ , e ) or (0.60, 3.35), respectively. The small number of patients (30) may have contributed to the large standard errors of b and b and consequently, the wide conﬁdence intervals. The lower bound of the conﬁdence interval for age is only slightly above 1. This suggests that the importance of age should be interpreted carefully. In general, if the number of subjects is small and the standard errors of the estimates are large, the estimates may be unreliable. When the two covariates are considered simultaneously, the risk for a patient with x : 1 and x : 1 relative to patients with x : 0 and x : 0 can be estimated. The relative risk is estimated as exp(1.01 ; 0.35) : 3.90 for a patient who is over 50 years of age and whose cellularity is 100%, compared to patients who are younger than 50 and whose cellularity is less than 100%. Using the same data set ‘‘C:AML.DAT’’ deﬁned in Example 11.3, the following SAS code can be used to obtain the results in Table 12.1. data w1; inﬁle ‘c:aml.dat’ missover; input t cens x1 x2; run; proc phreg; model t*cens(0) : x1 x2 / rl; run;

If BMDP 2L is used, the following code is applicable. /input

/print /variable /form

/regress

ﬁle : ‘c:aml.dat’ . variables : 4. format : free. cova. names : t, cens, x1, x2. time : t. status : cens. response : 1. covariates : x1, x2.

     

307

If SPSS is used, the following code sufﬁces. data list ﬁle : ‘c:aml.dat’ free / t cens x1 x2. coxreg t with x1 x2 /status : cens event (1) /print : all.

Example 12.2 In a study (Buzdar et al., 1978) to evaluate a combination of 5-ﬂourouracil, adramycin, cyclophosphamide, and BCG (FAC-BCG) as adjuvant treatment in stage II and III breast cancer patients with positive axillary nodes, 131 patients receiving FAC-BCG after surgery and radiation therapy were compared with 151 patients receiving surgery and radiation therapy only (control group). Cox’s regression model was used to identify prognostic factors and to evaluate the comparability of the two treatment groups. The model was ﬁtted to the data from 151 patients to determine the variables related to length of remission. The possible prognostic variables considered were age (years), menopausal status (1, premenopausal; 0, other), size of primary tumor (2, 3 cm; 4, 3—5 cm; 7, 5 cm), state of disease (2, stage II; 3, stage III), location of surgery (1, M. D. Anderson Hospital; 0, other), number of nodes involved (2, 4; 7, 4—10; 12, 10), and race (1, Caucasian; 2, other). The covariates were selected by the forward selection method outlined in Section 11.9. Three variables — number of nodes involved, state of disease, and menopausal status — were selected for use in the model, all related signiﬁcantly (p 0.1) to disease-free time. The regression equation including these variables only is h (t) log G : 0.111(number of nodes 9 6.16) ; 0.8122(stage 9 2.39) h (t) ; 0.872(menopausal 9 0.26) Table 12.2 gives the details of the ﬁt. Relative risk was taken as h (t)/h (t), the G ratio of the risk of death per unit of time for a patient with a given set of prognostic variables to the risk for a patient whose prognostic variables were average in value. The relative risk for each variable was calculated by considering favorable or unfavorable values of that variable, assuming that other variables were at their average value. Note that the risk of relapse per unit time for a patient with 12 positive nodes is 3.04 (ratio or risk) times that for a patient with only two positive nodes. The risk of relapse per unit time for a stage III patient was 2.25 times that of a stage II patient. The Cox’s regression model was also ﬁtted to the combined group of FAC-BCG and control patients, including type of treatment (0, control; 1, FAC-BCG), menopausal status, size of primary tumor, and number of involved nodes as potential prognostic variables. The regression equation with three

308

       

Table 12.2 Patient Characteristics Related to Disease-Free Time in Cox’s Regression Model Fit to Control Patients

Prognostic Variable Number of nodes Stage Menopausal status

Regression Coefﬁcient

Signiﬁcance Level (p)

Maximum Log Likelihood

Relative Risk? Favorable

Unfavorable

Ratio of Risks

0.1110 0.8122

0.01 0.016

9257.407 9254.533

0.63 0.73

1.91 1.64

3.04 2.25

0.8720

0.1

9250.576

0.80

1.91

2.39

Source: Buzdar et al. (1978). Reprinted by permission of the editor. ? Favorable variables: number of nodes : 2, stage II, postmenopausal. Unfavorable variables: number of nodes : 12, stage III, premenopausal.

signiﬁcant (p 0.05) variables obtained was as follows: h (t) log G : 91.8792(treatment 9 0.47) ; 0.9644(menopausal status 9 0.33) h (t) ; 0.1611(size of primary tumor 9 4.04) Table 12.3 gives the details of the ﬁt. The most important variable in predicting survival time was the type of treatment (FAC-BCG favorable); other signiﬁcantly important variables were menopausal status and size of primary tumor. The risk of death per unit of time for a patient receiving no adjuvant treatment (control group) was 6.55 times that for a patient receiving the treatment, showing that FAC-BCG can prolong life considerably.

Table 12.3 Patient Characteristics Related to Survival, Treatment Included

Prognostic Variable

Regression Coefﬁcient

Treatment 91.8792 Menopausal 0.9644 status Size of 0.1611 primary tumor

Signiﬁcance Level (p)

Maximum Log Likelihood

Relative Risks? Favorable

Unfavorable

Ratio of Risks

0.01 0.01

9201.200 9197.719

0.37 0.73

2.42 1.91

6.55 2.62

0.05

9195.865

0.72

1.61

2.24

Source: Buzdar et al. (1978). Reprinted by permission of the editor. ? Favorable variables: treatment — FAC-BCG, postmenopausal, size of primary tumor 2 cm. Unfavorable variables: no adjuvant treatment, premenopausal, size of primary tumor 7 cm.

     

309

Example 12.3 Suppose that demographic, personal, clinical, and laboratory data are collected from an interview and physical examination of 200 participants in a study of cardiovascular disease (CVD). These participants, aged 50—79 years and free of CVD at the time of the baseline examination, are then followed for 10 years. During the follow-up period, 96 of the 200 participants develop or die of CVD. We use this set of simulated data to illustrate further the use of the proportional hazards model in identifying important risk factors. Table 12.4 gives a subset of the simulated data of 68 participants. The event time T of interest is CVD-free time, which is deﬁned as the time in years from baseline examination to the ﬁrst time that a participant was diagnosed as having CVD or conﬁrmed as a CVD death. CVD includes coronary heart disease (CHD) and stroke. The covariates of interest are age (AGE), gender (SEX : 1 if male and :0 if female); smoking status (SMOKE : 1 if current smoker, and 0 otherwise); body mass index (BMI : weight in kilograms divided by height in meter squared); systolic blood pressure (SBP); logarithm of ratio of urinary albumin and creatinine (LACR); logarithm of triglycerides (LTG); hypertension status (HTN : 1 if SBP 140 mmHg or DBP 90 mmHg or under treatments of hypertension, and :0 otherwise); and diabetes status (DM : 1 if fasting glucose 126 mg/dL or under the treatments of diabetes, and :0 otherwise). For the CVD outcome of interest, we let DG denote the type of CVD. DG : 0 if the participant is free of CVD at the end of the study or conﬁrmed as a non-CVD death (thus the CVD-free time is censored), :1 if the participant had a stroke, :2 if the participant had a CHD, and :3 if the participant had other CVDs. It is of interest to compare the risk of CVD among the three age groups: 50—59, 60—69, and 70—79. We create two dummy variables: AGEA : 1 if aged 50—69, :0 otherwise; and AGEB : 1 if aged 60—69, and :0 otherwise. Thus for a 70 to 79-year-old, AGEA : 0 and AGEB : 0. We also create a variable to denote the censoring status: CENS : 0 if t is censored, and : 1 if uncensored. To illustrate the different methods to handle ties, we ﬁt the Cox proportional hazards model with the following six covariates: AGEA, AGEB, SEX, SMOKE, BMI, and LACR. The approximated partial likelihood function deﬁned in (12.1.15)—(12.1.17) as well as the exact partial likelihood function (Delong et al., 1994) are applied. As noted in Sections 11.3 and 11.4, the exponential and Weibull regression models are also proportional hazard models. Therefore, for comparisons we also ﬁt an exponential and a Weibull regression model with the same covariates to the data. The estimated regression coefﬁcients obtained from the proportional hazards model with approximated discrete, Breslow, Efron, and exact partial likelihood functions as well as those from the exponential and Weibull regression models are given in Table 12.5. All of the estimates based on the Cox model and an approximated partial likelihood function are very closed to those based on the exact partial likelihood. Those based on Efron’s approximation are almost identical to those (different only at the fourth decimal place) based on the exact partial

310

T

7.4 7.9 6.4 7.1 6.0 6.5 8.3 7.9 7.6 8.4 7.4 7.7 6.9 7.2 6.3 7.4 4.5 7.0 2.8 7.2 7.4 5.2 7.7 7.8 7.6 7.9 7.3

ID

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

CENS

0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

DG

0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1

0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0

AGEA AGEB 0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0

SEX 0 0 1 1 1 1 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1

SMOKE 31.78 25.02 26.05 26.92 34.30 31.76 25.01 28.21 28.13 25.68 34.34 28.92 24.68 21.93 29.47 28.65 32.28 29.21 28.82 30.58 27.83 26.61 30.32 30.41 29.98 26.00 29.05

BMI 141 124 111 140 146 142 154 136 127 118 118 127 100 121 98 150 128 117 136 121 95 128 96 130 140 118 110

SBP 4.23 4.31 4.38 1.11 1.19 1.20 3.53 3.73 2.92 2.47 2.37 3.58 2.11 3.39 1.96 2.59 2.99 2.17 4.04 2.84 1.85 2.87 2.41 1.45 1.88 2.34 1.44

LACR 3.94 4.66 4.27 4.51 4.82 4.88 4.10 4.12 4.24 4.41 4.46 4.55 4.33 4.64 4.69 4.95 4.73 4.91 4.92 4.94 4.44 4.51 4.60 4.73 4.51 4.53 4.67

LTG

Table 12.4 A Subset of the Simulated Data for a Cardiovascular Disease Study in Example 12.3?

77.8 76.9 76.3 72.2 76.0 74.5 70.7 75.2 64.9 60.2 64.4 68.8 64.4 60.8 64.4 61.6 65.3 65.7 65.4 64.5 52.0 50.7 52.5 55.9 53.4 51.0 50.6

AGE 1 0 0 1 1 1 1 1 0 0 0 1 0 0 0 1 0 0 0 0 0 0 0 0 1 0 0

HTN 0 1 0 0 0 0 1 0 0 0 1 1 0 1 0 0 0 1 1 1 0 0 1 0 0 0 0

DM

311

28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57

8.2 3.8 6.9 6.1 7.2 8.4 5.0 6.5 6.4 2.6 2.7 2.7 3.3 2.9 0.2 2.1 6.8 5.7 1.1 6.6 1.3 4.6 6.3 2.0 4.2 3.6 3.2 4.5 4.5 6.1

0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 1

0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 0

0 1 1 1 1 1 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0

1 0 0 0 0 1 1 1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0

27.21 36.97 29.44 33.85 32.13 27.52 30.64 29.94 29.89 30.88 25.05 26.80 21.67 36.83 21.49 31.05 26.78 35.78 28.44 24.38 34.13 43.23 38.67 34.49 20.78 28.40 28.73 44.25 32.46 39.72

131 141 115 154 122 135 114 120 115 189 200 130 111 114 125 131 134 132 134 124 126 128 126 130 127 118 154 97 141 118

2.50 4.60 2.89 3.48 2.92 2.39 1.39 2.96 1.68 5.38 3.37 2.31 3.53 2.64 4.61 1.38 4.36 9.93 3.54 4.16 5.87 5.08 5.16 2.69 4.40 5.43 1.94 2.01 0.74 2.39

4.68 4.25 4.26 4.48 4.48 4.42 4.45 4.49 4.52 4.72 4.86 5.10 4.18 4.52 4.69 4.48 4.90 5.11 4.32 4.00 3.95 5.25 4.50 3.95 4.54 4.66 5.24 4.40 4.39 3.93

0 1 0 1 0 0 1 0 0 1 1 0 0 0 0 0 1 0 0 0 0 0 1 1 0 1 1 0 1 0

0 0 1 0 0 0 0 0 0 1 1 0 0 0 0 0 0 1 0 1 1 1 1 1 0 1 1 1 0 1 (Continued overleaf )

57.7 58.7 53.6 51.2 55.2 53.7 54.9 50.7 51.3 73.9 77.2 73.5 71.1 68.2 67.3 69.1 61.0 52.5 55.7 51.8 53.1 72.2 76.8 76.7 73.1 69.3 68.9 68.6 63.5 52.6

312

3.0 2.1 1.3 4.9 2.5 3.8 5.0 1.5 4.1 0.5 2.7

58 59 60 61 62 63 64 65 66 67 68

1 1 1 1 1 1 1 1 1 1 1

CENS

2 2 2 3 3 3 3 3 3 3 3

DG

1 1 1 0 0 0 0 0 1 1 1

0 0 0 0 0 0 1 1 0 0 0

AGEA AGEB 0 1 1 0 0 1 1 1 0 1 1

SEX 1 0 1 0 1 0 0 1 0 0 1

SMOKE 27.90 27.77 31.03 25.22 45.29 25.03 46.76 28.53 23.63 31.39 30.29

BMI 117 119 151 129 130 188 96 126 144 134 115

SBP 7.45 7.03 3.94 6.69 2.46 6.25 3.93 3.09 8.24 6.96 4.70

LACR 5.61 4.71 4.43 3.90 4.40 5.63 4.12 4.65 4.82 4.11 4.98

LTG 56.0 54.3 59.2 75.4 75.7 71.7 65.6 68.6 59.4 54.2 59.1

AGE 0 0 1 1 0 1 1 0 1 1 1

HTN 1 1 1 0 1 1 0 1 1 0 1

DM

? ID, participant id number; T, CVD event time (CVD-free time); CENS : 0 if censored, and :1 if uncensored; DG : 0 if non-CVD at the end of the study or non-CVD death, :1 if stroke, :2 if coronary heart disease (CHD), and :3 if the other CVDs; AGEA : 1 if aged 50—59 and :0 otherwise; AGEB : 1 if aged 60—69 and :0 otherwise; SEX : 1 if male and :0 if female; SMOKE : 1 if current smoker and 0 otherwise; BMI, body mass index; SBP, systolic blood pressure; LACR, logarithm of the ratio of urinary albumin and creatinine; LTG, logarithm of triglycerides; HTN : 1 if SBP140 mmHg or DBP (diastolic blood pressure)90 mmHg and :0 otherwise; DM : 1 if fasting glucose126 mg/dL and :0 otherwise.

T

ID

Table 12.4 Continued

     

313

Table 12.5 Results from Fitting a Cox Proportional Hazards Model Based on Different Methods for Ties on the CVD Data Regression Coefﬁcient Variable

Breslow

Discrete

Efron

Exact

Exponential

Weibull

AGEA AGEB SEX SMOKE BMI LACR

91.3478 90.7709 0.7134 0.3762 0.0253 0.1735

91.3662 90.7828 0.7233 0.3810 0.0256 0.1759

91.3558 90.7753 0.7187 0.3776 0.0255 0.1739

91.3560 90.7755 0.7189 0.3776 0.0255 0.1740

91.2550 90.7107 0.6862 0.3440 0.0233 0.1658

91.0436 90.5966 0.5659 0.2855 0.0194 0.1357

likelihood function. The estimated regression coefﬁcients based on the two parametric models, particularly the exponential regression model, are also close to those based on the Cox hazards model. From the signs of the coefﬁcients, we see that men, current smokers, and persons with high BMI and albumin—creatinine ratios have a higher hazard (risk) of CVD and shorter CVD-free time. The coefﬁcients of the two age variables are both negative, indicating that persons in the younger age groups have a lower hazard (risk) of CVD. Suppose that ‘‘C:EX12d2d1.DAT’’ contains eight successive columns, for T, CENS, AGEA, AGEB, SEX, SMOKE, BMI, and LACR, and that the numbers in each row are space-separated. The following code for the SAS PHREG and LIFEREG procedures can be used to obtain the results in Table 12.5. data w1; inﬁle ‘c:ex12d2d1.dat’ missover; input t cens agea ageb sex smoke bmi lacr; run; proc phreg; model t*cens(0) : agea ageb sex smoke bmi lacr / ties : breslow; run; proc phreg; model t*cens(0) : agea ageb sex smoke bmi lacr / ties : discrete; run; proc phreg; model t*cens(0) : agea ageb sex smoke bmi lacr / ties : efron; run; proc phreg; model t*cens(0) : agea ageb sex smoke bmi lacr / ties : exact; run; proc lifereg; Model a: model t*cens(0) : agea ageb sex smoke bmi lacr / d : exponential; Model b: model t*cens(0) : agea ageb sex smoke bmi lacr / d : weibull; run;

314

       

12.2 IDENTIFICATION OF SIGNIFICANT COVARIATES As noted earlier, one principal interest is to identify signiﬁcant prognostic factors or covariates. This involves hypothesis testing and covariate selection procedures, similar to those discussed in Chapter 11 for parametric methods. The differences are that the Cox proportional hazard model has a partial likelihood function in which the only parameters are the coefﬁcients associated with the covariates. However, statistical inference based on the partial likelihood function has asymptotic properties similar to those based on the usual likelihood. Therefore, the estimation procedure (discussed in Section 12.1) is similar to those in Section 7.1, and the hypothesis-testing procedures are similar to those in Sections 9.1 and 11.2. For example, the Wald statistic in (9.1.4) can be used to test if any one of the covariates has no effect on the hazard, that is, to test H : b : 0. By replacing the log-likelihood G function with the log partial likelihood function, the log-likelihood ratio statistic, the Wald statistic, and the score statistic in (9.1.10), (9.1.11), and (9.1.12) can be used to test the null hypothesis that all the coefﬁcients are equal to zero, that is, to test H : b : 0, b : 0, . . . , b : 0 N or H : b : 0 in (9.1.9). Similarly the forward, backward, and stepwise selection procedures discussed in Section 11.9.1 are applicable to the Cox proportional hazard model. The following example, using the SAS PHREG procedure, illustrates these procedures. Example 12.4 We use the entire CVD data set in Example 12.3 to demonstrate how to identify the most important risk factors among all the covariates. Suppose that the effects of age, gender, and current smoking status on CVD risk are of fundamental interest and we wish to include these variables in the model. In epidemiology this is often referred to as adjusting for these variables. Thus, AGEA, AGEB, SEX, and SMOKE are forced into the model and we are to select the most important variables from the remaining covariates (BMI, SBP, LACR, LTG, HTN, and DM), adjusting for age, gender, and current smoking status. The SAS procedure PHREG is used with Breslow’s approximation for ties (default procedure) and three variable selection methods (forward, backward, and stepwise). Two covariates, BMI and LACR, are selected at the 0.05 signiﬁcance level by all three selection methods. The ﬁnal model, in the form of (12.1.5), including only the four covariates that we purposefully included and the two most signiﬁcant ones identiﬁed by the selection method, is

    log

315

h(t ) G : b AGEA ; b AGEB ; b SEX ; b SMOKE G G G G h (t ) G ; b BMI ; b LACR G G : 91.3558AGEA 9 07753AGEB ; 0.7187SEX G G G ; 0.3776SMOKE ; 0.0255BMI ; 0.1739LACR G G G

(12.2.1)

The regression coefﬁcients, their standard errors, the Wald test statistics, p values, and relative hazards (relative risks as they are termed by many epidemiologists) are given in Table 12.6. The estimated regression coefﬁcients b , i : 1, 2, . . . , 6, are solutions of (12.1.9) using the Newton—Raphson iterated G procedure (Section 7.1). The estimated variances of b , i : 1, 2, . . . , 6, are the G respective diagonal elements of the estimated covariance matrix deﬁned in (12.1.13). The square roots of these estimated variances are the standard errors in the table. The Wald statistics are for testing the null hypothesis that the covariate is not related to the risk of CVD or H : b : 0, i : 1, . . . , 6, respect G ively. For example, the Wald statistic equals 10.7457 for gender with a p value

Table 12.6 Asymptotic Partial Likelihood Inference on the CVD Data from the Final Cox Proportional Hazards Model? 95% Conﬁdence Interval Variable

Regression Coefﬁcient

Standard Error

Wald Statistic

p

Relative Hazards

Lower

Upper

0.151 0.276 1.335 0.946 1.001 1.090

0.439 0.769 3.153 2.249 1.051 1.299

Final Model for the Cohort CV D Data AGEA AGEB SEX SMOKE BMI LACR

91.3558 90.7753 0.7187 0.3776 0.0255 0.1739

b 9b b ;b b 9b

90.580 1.096 0.341

0.2712 0.2618 0.2193 0.2208 0.0124 0.0446

24.9910 8.7709 10.7457 2.9235 4.2113 15.2112

0.0001 0.0031 0.0010 0.0873 0.0402 0.0001

0.258 0.461 2.052 1.459 1.026 1.190

4.9443 11.5409 1.3001

0.0262 0.0007 0.2542

0.560 2.993 1.407

Hypothesis Testing Results (H : all b : 0) G Log-partial-likelihood ratio statistic 42.1130 0.0001 Score statistic 43.1750 0.0001 Wald statistic 41.3830 0.0001 ? The covariates, except AGEA, AGEB, SEX, and SMOKE, in the ﬁnal model are selected among BMI, SBP, LACR, LTG, HTN, and DM.

316

       

of 0.0010 and b : 0.7187. It indicates that after adjusting for all the variables in the model (12.2.1), gender is a signiﬁcant predictor for the development of CVD, with men having a higher risk than women. The relative hazard (or risk) is exp(b ), and for the covariate gender, it is exp(0.7187) : 2.052, which implies that men aged 50—79 years have about twice the risk of developing CVD in 10 years. The 95% conﬁdence interval for the relative risk is (1.335, 3.153), which is calculated according to (7.1.8). For a continuous variable, exp(b ) represents G the increase in risk corresponding to a 1-unit increase in the variable. For example, for BMI, exp (0.0255) : 1.026; that is, for every unit increase in BMI, the risk for CVD increases 2.6%. To compare hazards among different age groups, between genders, or between smokers and nonsmokers, let h (t), h (t), h (t), h (t), %# %# %#! +* h (t), h (t), and h (t) denote hazard functions for participants that are $#+ ,1+ 1+ 50—59, 60—69, 70—79 years old, male, female, current smoker, and not current smoker, respectively. The log hazard ratio of a person in the 50 to 59-year age group to a person in the 70 to 79-year group assuming the two people are of same gender and the same current smoking status, BMI and LACR, is log[h (t)/h (t)] : b ; similarly, log[h (t)/h (t)] : b and %# %#! %# %#! log[h (t)/h (t)] : b 9 b . Assuming that the two people are in the %# %# same age group and have the same BMI and LACR, the log hazard ratio of male to females is h (t) log +* : b h (t) $#+ Similarly, assuming that the two people are in the same age group, of the same gender, and have the same BMI and LACR, the hazard ratio of a smoker to a nonsmoker is log

h (t) 1+ : b h (t) ,1+

Thus, testing whether risk of CVD are the same among different age groups is equivalent to testing H : b : 0, H : b : 0, and H : b 9 b : 0. Similarly, to test if the risk of CVD is the same between males and females or between smokers and nonsmokers is equivalent to tasting the null hypothesis H : b : 0 or H : b : 0, respectively. To consider more than one covariate, we also can formulate the null hypothesis by using (12.2.1). For example, if we wish to compare male nonsmokers to female smokers, from (12.2.1), h log +*\,1+ : b 9 b h $#+\1+

   

317

assuming that they are in the same age group and have the same BMI and LACR. Thus to test if these two groups of people have the same risk of CVD, we test the null hypothesis H : b 9 b : 0. Similarly, to compare male smokers to female nonsmokers, we can test the null hypothesis H : b ; b : 0. These null hypotheses are in the form of linear combinations of the coefﬁcients. Using the notations in Section 11.2, the hypotheses H : b 9 b : 0 and H : b ; b : 0 are the hypotheses in (11.2.13) with c : 0, L : (1 91 0 0 0 0), and L : (0 0 1 1 0 0), respectively. The Wald statistics in Table 12.6 are calculated according to (11.2.14). By assuming that the patients have the same BMI and LACR, we can construct hypotheses to compare subgroups deﬁned by age groups, gender, and current smoking status. The last part of Table 12.6 shows the results of testing the null hypothesis that none of these covariates have any effect on the development of CVD. The log partial likelihood ratio, Wald, and score statistics, X , X , and X are * 5 1 calculated according to (9.1.10), (9.1.11), and (9.1.12), respectively. Table 12.6 indicates that the hypotheses, H : b : 0, H : b : 0, H : b 9 b : 0, H : b : 0, H : b : 0, H : b : 0, and H : b ; b : 0 are rejected at a signiﬁ cance level of p : 0.05. However, the hypotheses H : b : 0 and H : b 9 b : 0 are not rejected at a 0.05 level. The null hypothesis H : all b : 0, i : 1, . . . , 6, is rejected with p : 0.0001 by using any of these G tests. Assuming that the other covariates are the same, based on the relative hazards shown in the table, we conclude that (1) participants aged 50—59 and 60—69 have, respectively, about 25% and 50% lower CVD risk than those aged 70—79 (H : b : 0 and H : b : 0 are rejected); (2) participants aged 50—59 have 50% lower CVD risk than those aged 60—69 (H : b 9 b : 0 is rejected); (3) men’s CVD risk is twice as high as that of women (H : b : 0 is rejected); (4) BMI and LACR have a signiﬁcant effect on CVD risk (H : b : 0 and H : b : 0 are rejected) and the risk increases about 3% and 19%, respectively, for every 1-unit increase in BMI and LACR, respectively; (5) male smokers have a CVD risk three times higher than that of female nonsmokers (H : b ; b : 0 is rejected); (6) male nonsmokers have CVD risk similar to that of female smokers (H : b 9 b : 0 is not rejected); (7) consider ing current smoking status alone, smokers had similar CVD risk as nonsmokers (H : b : 0 is not rejected). This example is solely for the purpose of illustrating the use of the proportional hazards model and the interpretation of its results. Other hypotheses of interest can be constructed in a similar manner. The construction of null hypotheses for comparisons among subgroups deﬁned by AGEGROUP*SEX*SMOKE are left to the reader as exercises. Suppose that ‘‘C:EX12d4d1.DAT’’ is a text data ﬁle that contains 12 successive columns for T, CENS, AGEA, AGEB, SEX, SMOKE, BMI, LACR, SBP, LTG, HTN, and DM. The following SAS code is used to obtained the results in Table 12.6.

318

       

data w1; inﬁle ‘c:ex12d4d1.dat’ missover; input t cens agea ageb sex smoke bmi lacr sbp ltg htn dm; run; proc phreg data : w1; model t*cens(0) : agea ageb sex smoke bmi lacr sbp ltg htn include : 4 selection : f ; run; proc phreg data : w1; model t*cens(0) : agea ageb sex smoke bmi lacr sbp ltg htn include : 4 selection : b; run; proc phreg data : w1 outest : wcov covout; model t*cens(0) : agea ageb sex smoke bmi lacr sbp ltg htn include : 4 selection : s; run; proc phreg data : w1; model t*cens(0) : agea ageb sex smoke bmi lacr sbp ltg htn include : 4 selection : score best : 3; run; data wcov; set wcov; if -type- : ‘cov’; keep agea ageb sex smoke bmi lacr sbp ltg htn dm; run; title ‘The estimated covariance of the estimated coefﬁcients’; proc print data : wcov; run;

dm /

dm /

dm /

dm /

The following SPSS code can be used to select an optimal subset of covariates among all covariates by the forward and backward selection methods deﬁned in Section 11.9.1 and to obtain the estimated coefﬁcients and the other results in Table 12.6.

data list ﬁle : ‘c:ex12d4d1.dat’ free / t cens agea ageb sex smoke bmi lacr sbp ltg htn dm. coxreg t with agea ageb sex smoke bmi lacr sbp ltg htn dm /status : cens event (1) /method : fstep bmi lacr sbp ltg htn dm /criteria pin (0.05) pout (0.05) /print : all. coxreg t with agea ageb sex smoke bmi lacr sbp ltg htn dm /status : cens event (1) /method : bstep bmi lacr sbp ltg htn dm /criteria pin (0.05) pout (0.05) /print : all.

      

319

If BMDP 2L is used, the following code is applicable when selecting an optimal subset of covariates among all covariates by the stepwise selection method deﬁned in Section 11.9.1 and to obtain the results in Table 12.6. /input

/print /variable /form

/regress

ﬁle : ‘c:ex12d4d1.dat’ . variables : 12. format : free. cova. names : t,cens, agea, ageb, sex, smoke, bmi, lacr, sbp, ltg, htn, dm. time : t. status : cens. response : 1. covariates : agea, ageb, sex, smoke, bmi, lacr, sbp, ltg, htn, dm. Step : phh.

Example 12.5 If we do not force age, gender, and current smoking status on the model and are not interested in the three age groups, we can ﬁt the proportional hazard model with age as a continuous variable and the other covariates: SEX, SMOKE, BMI, SBP, LACR, LTG, HTN, and DM. Using Breslow’s method for ties, the stepwise selection method, and the SAS procedure PHREG, the ﬁnal model with signiﬁcant (p 0.05) covariates is log

h(t) : 0.697AGE ; 0.7528SEX ; 0.1111LACR ; 0.3987LTG h (t) (12.2.2)

The details are given in Table 12.7; all four covariates in the model have positive coefﬁcients, indicating that the risk of developing CVD increases with age, gender, albumin/creatinine ratio, and triglyceride values. The relative hazards represent the increase in risk of CVD per unit increase in the covariates. For example, for every 1-unit increase in log(albumin/creatinine), the risk of developing CVD increases 12% after adjusting for age, gender, and log triglyceride. Men have more than twice the risk of CVD as women. The global null hypothesis that all four coefﬁcients equal zero (H : all b : 0) is G rejected by all three tests, as given in the lower part of Table 12.7.

12.3 ESTIMATION OF THE SURVIVORSHIP FUNCTION WITH COVARIATES When parametric regression models (Chapter 11) are used, we can estimate the survivorship function simply by replacing the parameters and coefﬁcients in the survival function with their estimates. This is not the case when the Cox

320

       

Table 12.7 Asymptotic Partial Likelihood Inference on the CVD Data from the Final Cox Proportional Hazards Model Selected by the Stepwise Model Selection Method? 95% Conﬁdence Interval for Relative Hazards Regression Coefﬁcient

Standard Error

Chi-Square Statistic

p

Relative Hazards

Lower

Upper

0.0697 0.7528 0.1111 0.3987

0.0136 0.2192 0.0459 0.1976

26.1393 11.7893 5.8602 4.0722

0.0001 0.0006 0.0155 0.0436

1.07 2.12 1.12 1.49

1.04 1.38 1.02 1.01

1.10 3.26 1.22 2.20

H : All coefﬁcients equal zero Log-partial-likelihood ratio statistic Score statistic Wald statistic

44.002 44.278 42.527

0.0001 0.0001 0.0001

Variable AGE SEX LACR LTG

? The covariates in the ﬁnal model are selected among AGE, SEX, SMOKE, BMI, LACR, LTG, HTN, and DM using the stepwise selection method.

proportional hazards model is used since we do not know the exact form of the baseline hazard function or the survival function. In this section we introduce brieﬂy two estimators of the survival function, one proposed by Breslow (1974) and the other by Kalbﬂeisch and Prentice (1980). These estimates are available in commercial software packages. Readers interested in details are referred to the corresponding publications. As indicated earlier, under the Cox model, the survivorship function with covariates x ’s is H S(t, x) : [S (t)]exp(NH bH xH )

(12.3.1)

Once the regression coefﬁcients, the b ’s, are estimated, we need only estimate H the underlying survivorship function, S (t). From the estimated survivorship function, we can easily estimate the probability of surviving longer than a given time for a patient with a given set of covariates x , . . . , x . N By assuming that the baseline hazard function is constant between each pair of successive observed failure times, Breslow has proposed the following estimator of the baseline cumulative hazard function:

m G H (t) : t t l + R(t ) exp(x b ) G G J

(12.3.2)

      

321

Following (2.15), the baseline survival function can be estimated as

m G S (t) : exp[9H (t)] : exp l + R(t ) exp(x b ) t t G G J

(12.3.3)

and the survivorship function for a person with a set of covariates x : (x , . . . , x ) is N S (t, x) : [S (t)] exp(NH b H xH ) : [S (t)] exp(b x)

(12.3.4)

Under mild assumptions, S (t, x) has an asymptotic normal distribution with (S (t, x)) mean S(t, x). Since S(t, x) : exp[9H(t, x)], the variance estimator Var of S (t, x) is (S (t, x)) < [S (t, x)] Var (H (t, x)) Var We will not give H (t, x) here because of its complexity. The asymptotic conﬁdence bands for the survivorship function is (S (t, x)) , S (t, x) ; Z (Var (S (t, x)) S (t, x) 9 Z (Var ? ?

(12.3.5)

where Z is the upper 100(1 9 /2) percentile point of the standard normal ? distribution. An alternative estimator has been suggested by Kalbﬂeisch and Prentice in which the baseline survivorship function S (t) is estimated to be a step function and G\ S (t) : H H

t

G\

t t , i : 1, . . . , k ; 1 G

(12.3.6)

where Y 1 and , , . . . , are the solution of the following k simultaneous I equations: j + u* G

exp(x b ) H : exp(x b ) J 1 9 exp(xH b ) l + R(t ) G G

i : 1, . . . , k

(12.3.7)

When there are no ties,

exp(x b ) G

: 1 9 G l + R(t ) exp(x b ) G J

exp(9x b ) G

i : 1, . . . , k

(12.3.8)

and

G\ exp(x b ) H S (t) : 1 9 l + R(t ) exp(x b ) H J H

exp(9x b ) H

t tt G\ G

i : 1, . . . , k ; 1

322

       

Thus, S (t, x) : [S (t)] exp(b x)

(12.3.9)

Under mild assumptions, the Kalbﬂeisch and Prentice estimator in (12.3.9) also follows an asymptotic normal distribution with mean S(t, x) and a variance that can be estimated. Thus conﬁdence bands for the survivorship function can also be constructed. Using (12.3.4) with S (t) in (12.3.3) or (12.3.6), the survivorship function can be estimated with any given values of x , . . . , x . If the observed average of N every covariate, x , . . . , x is used, the estimated survivorship function can be N interpreted as the survivorship function of an ‘‘average’’ person. Both the Breslow and Kalbﬂeisch—Prentice estimators are available in the SAS procedure PHREG. The Breslow estimator is also available in BMDP (program 2L) and SPSS (program COXREG). The following example illustrates the procedures. Example 12.6 Again, we use the CVD data in the Example 12.3, the data set ‘‘C:EX12d2d1.DAT’’, and the SAS procedure PHREG. We use the average of each of the covariates in (12.2.1), and therefore the estimated survivorship function is for an average person. The Kalbﬂeisch—Prentice and Breslow estimates of the survival function, deﬁned in (12.3.9) and (12.3.4) (Efron adjustment for ties is used), and the lower and upper 95% conﬁdence bands, calculated based on (12.3.5), are shown in Figures 12.1 and 12.2. These estimated survival functions, using all the covariates in the model with average values, are often referred to as the global covariate—adjusted survivorship functions. The two ﬁgures are almost identical, which indicates that the two methods produce very similar results for this set of data. From Figure 12.1 it appears that the global covariates—adjusted survivorship function decreases somewhat more rapidly after 3.5 years. This means that the process to develop CVD accelerates after 3.5 years. Using the data set ‘‘C:EX12d2d1.DAT’’ deﬁned in Example 12.3, the SAS code used for this example is the following. data w1; inﬁle ‘c:ex12d2d1.dat’ missover; input t cens agea ageb sex smoke bmi lacr; run; proc phreg data : w1 noprint; model t*cens(0) : agea ageb sex smoke bmi lacr / ties : efron; baseline out : base1 survival : survival l: lowb u : uppb / method : p l; run; title ’K-P estimate of the survival function and its lower and upper bands’; proc print data : base1; var t survival lowb uppb; run;

      

323

Figure 12.1 Kalbﬂeisch—Prentice estimate of survivorship function and its 95% conﬁdence bands at the averages of the covariates from the ﬁtted Cox proportional hazards model on the CVD data.

proc phreg data : w1 noprint; model t*cens(0) : agea ageb sex smoke bmi lacr / ties : efron; baseline out : base1 survival : survival l : lowb u : uppb / method : ch; run; title ’Breslow estimate of the survival function and its lower and upper bands’; proc print data : base1; var t survival lowb uppb; run;

The following SPSS code can be used to obtain the Breslow estimate of the survival function and its standard error at each uncensored observation. The conﬁdence bands can then be calculated according to (12.3.5). data list ﬁle : ‘c:ex12d2d1.dat’ free / t cens agea ageb sex smoke bmi lacr. coxreg t with agea ageb sex smoke bmi lacr /status : cens event (1) /print : all.

324

       

Figure 12.2 Breslow estimate of the survivorship function and its 95% conﬁdence bands at the averages of the covariates from the ﬁtted Cox proportional hazards model on the CVD data.

The corresponding BMDP 2L code is /input

/print /variable /form

/regress

ﬁle : ‘c:ex12d2d1.dat’ . variables : 8. format : free. cova. Survival. names : t,cens, agea, ageb, sex, smoke, bmi, lacr. time : t. status : cens. response : 1. covariates : agea, ageb, sex, smoke, bmi, lacr.

In addition to the global covariates—adjusted survivorship function deﬁned as S (t, x ), where x : (x , x , . . . , x ), the survivorship function can be estimated N with any speciﬁc values of one or more of the covariates and interactions. We can also estimate the probability of surviving longer than a given time for individuals with a given set of values for covariates. The following is an example.

      

325

Figure 12.3 Breslow estimate of survivorship functions at the averages of BMI and LACR from SEX*SMOKER subgroups in aged 70—79 participants from the ﬁtted Cox proportional hazards model on the CVD data.

Example 12.7 For the same model as in Example 12.6, we can estimate the covariate-speciﬁc survivorship function for female nonsmokers, female smokers, male smokers, and male nonsmokers. Let us use the 70—79 age group and assume that BMI and LACR are at the average of the respective SEX—SMOKE subgroup. Thus, the speciﬁc covariate vector (AGEA, AGEB, SEX, SMOKE, BMI, LACR) for female nonsmokers is (0, 0, 0, 0, 30.69, 4.62), where 30.69 and 4.62 are the average values of BMI and LACR for female nonsmokers. Similarly, the speciﬁc covariate vectors for female smokers, male nonsmokers, and male smokers are, respectively, (0, 0, 0, 1, 31.19, 2.67), (0, 0, 1, 0, 28.19, 3.43), and (0, 0, 1, 1, 25.76, 3.47). The estimated survival curves are shown in Figure 12.3. Similarly, Figures 12.4 and 12.5 give the estimated survival curves of the four groups in persons aged 60—69 years and 50—59 years, respectively. The groups show that in all these age groups, females have a lower risk of developing CVD (longer CVD-free time) than males. Female nonsmokers have a slightly lower risk than female smokers and the differences increase as age decreases. However, among males, the differences in the risk of CVD between smokers and nonsmokers are almost negligible in the youngest group and much larger in the two older groups. Male smokers have the highest risk of developing CVD (shortest CVD-free time) among the four groups.

326

       

Figure 12.4 Breslow estimate of survivorship functions at the averages of BMI and LACR from SEX*SMOKER subgroups in aged 60—69 participants from the ﬁtted Cox proportional hazards model on the CVD data.

12.4 ADEQUACY ASSESSMENT OF THE PROPORTIONAL HAZARDS MODEL The validity of statistical inferences that leads to the identiﬁcation of important risk or prognostic factors depends largely on the adequacy of the model selected. The proportional hazards model is used widely in medical and epidemiological studies. The adequacy of this model, including the assumption of proportional hazards and the goodness of ﬁt, needs to be assessed. In this section we introduce several methods for this purpose. A major reason for selecting these methods to present here is the availability of computer software that can perform the calculations. 12.4.1 Checking the Proportional Hazards Assumption The proportional hazards models deﬁned in (12.1.1) and (12.1.3) assume that the hazard ratio of two people is independent of time. This requires that covariates not be time-dependent. If any of the covariates varies with time, the proportional hazards assumption is violated. This fact can be used to test the assumption by including a time—covariate interaction term in the model and

      

327

Figure 12.5 Breslow estimate of survivorship functions at the averages of BMI and LACR from SEX*SMOKER subgroups in aged 50—59 participants from the ﬁtted Cox proportional hazards model on the CVD data.

testing if the coefﬁcient for interaction is signiﬁcantly different from zero. For example, we can add an interaction term x t or x log t in the model, that is, G G log

h(t) :b x ;%;b x ;b x t;b x ;%;b x G G G G G> G> N N h (t)

log

h(t) : b x ; % ; b x ; b x log t ; b x ; % ; b x G G G G G> G> N N h (t)

or

With the added interaction term, the partial likelihood function becomes more complicated. Fortunately, computer software is available to carry out the calculations. Testing procedures similar to those discussed earlier (e.g., the Wald test), can be used to test the null hypothesis H : b : 0. If H is rejected, G we conclude that Cox’s proportional hazard model is not appropriate for the data. The interaction term with log t can be included in the model for each of the covariates separately. If none of the corresponding p null hypotheses H : b : 0 is rejected, we may conclude that the proportional hazards assump G tion is appropriate.

328

       

Example 12.8 Consider the ﬁtted proportional hazards model in (12.2.2) for the CVD data. To check the proportional hazards assumption, we add a term L T G;log(t ; 1) to the model. We use t ; 1 instead of t to avoid negative values. Table 12.8(a) gives the results. The p value for the interaction term is 0.1910. Similarly, the results in Table 12.9(b) and (c) suggest that LACR;log(t ; 1) and AGE;log(t ; 1) are not signiﬁcant either. Since gender is time-independent, we may conclude that the data satisfy the proportional hazards assumption since every covariate in the model is time-independent. Another method to check the proportional hazards assumption is to stratify the data based on some values of a covariate, ﬁt a stratiﬁed Cox proportional hazards model (this is discussed in Chapter 13), and then construct the survivorship function separately for the each stratum and plot log(9log(S (t; x ))) H H

j : 1, 2, . . . , m

Table 12.8 Asymptotic Partial Likelihood Inference on the CVD Data from the Cox Proportional Hazards Model with Time-Dependent Covariate 95% Conﬁdence Interval for Relative Hazards Regressor Variable

Regressor Coefﬁcient

Standard Error

Wald Statistic

p

Relative Hazards

Lower

Upper

(a) AGE SEX LACR LTG LTG* log(t;1)

0.068 0.759 0.111 0.915 90.390

0.014 0.218 0.046 0.435 0.298

25.249 12.056 5.781 4.420 1.710

0.0001 0.0005 0.0162 0.0355 0.1910

1.07 2.14 1.12 2.50 0.68

1.04 1.39 1.02 1.06 0.38

1.1 3.28 1.22 5.86 1.22

0.0001 0.0008 0.4714 0.0478 0.0706

1.07 2.10 0.92 1.48 1.15

1.05 1.36 0.72 1 0.99

1.1 3.23 1.16 2.19 1.35

(b) AGE SEX LACR LTG LACR* log(t;1)

0.071 0.741 90.087 0.395 0.143

0.014 0.220 0.120 0.199 0.079

26.635 11.327 0.519 3.917 3.269

(c) AGE SEX LACR LTG AGE*log(t ;1)

0.038 0.764 0.111 0.417

0.033 0.220 0.046 0.197

1.330 12.020 5.888 4.469

0.2488 0.0005 0.0152 0.0345

1.04 2.15 1.12 1.52

0.97 1.39 1.02 1.03

1.11 3.31 1.22 2.24

0.023

0.023

1.046

0.3064

1.02

0.98

1.07

      

329

against time t, where m is the number of strata deﬁned by the covariate, x is the H vector of the average values of the other covariates for the jth stratum, and S (t; x ) H H is the estimated survivorship function of the jth stratum evaluated at t and x . If H the hazards are proportional, the m curves should be parallel. Nonparallel curves indicate departure from the proportional hazards assumption. This is because if hazard functions from any two people are proportional, it can be shown from (12.1.1) that, for any j " k and 1 j, k m, there exists a constant d such that HI (12.4.1) S (t; x ) : (S (t; x ))BHI H H I I Taking the logarithm twice, we have log[9log(S (t; x ))] : log d ; log[9log(S (t; x ))] (12.4.2) H H HI I I Thus the curves of log[9log(S (t; x ))] and log[9log(S (t; x ))] versus t should H H I I be parallel. Example 12.9 Consider again the ﬁtted model in (12.2.2); using the stratiﬁed analysis (more details are given in Chapter 13), we plot log[9log S (t; x )] against t for two age strata (50—64 and 65—79 years) and H H two gender strata separately, where x denotes the average values of the other H covariates for the jth stratum. These graphs are given in Figures 12.6 and 12.7,

Figure 12.6 Log[9log(S(t))] plots for the age-stratiﬁed Cox proportional hazards model on the CVD data.

330

       

Figure 12.7 Log[9log(S(t))] plots for gender-stratiﬁed Cox proportional hazards model on the CVD data.

respectively. The two curves in Figure 12.6 are roughly parallel. The two curves in Figure 12.7 are also parallel over time. The results suggest that the proportional hazards assumption holds. In Chapter 11 we discussed several parametric models. Among these models, the exponential and the Weibull are proportional hazards models, but the others are not. Thus, if one of the other models provides a good ﬁt to data, we would know that the data do not meet the proportional hazards assumption. This procedure can also be served as an alternative for checking the proportional hazards assumption. 12.4.2 Assessing Goodness of Fit by Residuals There are several other graphical methods available for assessing the goodness of ﬁt of a proportional hazards model. These graphical methods are based on residuals and are often used as diagnostic tools. In multiple regression methods, residuals are referred to as the difference between the observed and the predicted values (based on the regression model) of the dependent variable. However, when censored observations are present and only a partial likelihood function is used in the proportional hazards model, the usual concept of residuals is not applicable. In the following we introduce three different types

      

331

of residuals: the extended Cox—Snell, deviance, and Schoenfeld residuals. These can be plotted versus the survival time or a covariate. The pattern of the graph provides some information about the appropriateness of the proportional hazards model. It also provides information about outliers and other patterns. Similar to other graphical methods, interpretation of the residual plots may be subjective. The Cox—Snell method discussed in Section 8.4 can easily be extended to the proportional hazards model. The extended Cox—Snell residual, R , for the G ith individual with observed survival time t and covariates at values x is G deﬁned as R : 9log S (t ; x ), which is the estimated accumulated hazard G G G based on the proportional hazards model. If the t observed is censored, the G corresponding R is also censored. If the proportional hazards model is G appropriate, the plot of R and its Kaplan—Meier estimate of survival function G (S (R)) would appear as a 45° straight line. The Cox—Snell residual method is useful in assessing the goodness of ﬁt of a parametric model (Section 11.9.4). However, it is not so desirable for a proportional hazards model where a partial likelihood function is used and the survivorship function is estimated by nonparametric methods. The deviance residuals (Therneau et al., 1990) are deﬁned as R : sign(R )(2[9R 9 log( 9 R )] "G +G +G G G +G

i : 1, 2, . . . , n

(12.4.3)

where sign ( · ) is the sign function, which takes value 1 if its argument is positive, 0 if zero, and 91 if negative, R is the martingale residual (Fleming +G and Harrington, 1991) for the ith individual, R : 9R +G G G

i : 1, . . . , n

and : 1 if the observed survival time t is uncensored and 0 otherwise. G G The martingale residuals have a skewed distribution with mean zero (Anderson and Gill, 1982). The deviance residuals also have a mean of zero but are symmetrically distributed about zero when the ﬁtted model is adequate. Deviance residuals are positive for persons who survive for a shorter time than expected and negative for those who survive longer. The deviance residuals are often used in assessing the goodness of ﬁt of a proportional hazards model. Another residual method was proposed by Schoenfeld (1982) and modiﬁed by Grambsch and Therneau (1994). The original Schoenfeld residuals are deﬁned for each person and each covariate and are based on the ﬁrst derivative of the log-likelihood function in (12.1.9). A Schoenfeld residual for the jth covariate of the ith person with the observed survival time t is G

x exp(b x ) J R : x 9 l + R(tG) HJ HG G HG l + R(t ) exp(b x ) G J

j : 1, 2, . . . , p;

i : 1, 2, . . . , n (12.4.4)

332

       

where b is the maximum partial likelihood estimator of b. The Schoenfeld residuals are deﬁned only at uncensored survival times; for censored observations they are set as missing. Since b is the solution of (12.1.9), the sum of the Schoenfeld residuals for a covariate is zero. Thus asymptotically, the Schoenfeld residuals have a mean of zero. It can also be shown that these residuals are not correlated with one another. Grambsch and Therneau (1994) suggested that the Schoenfeld residuals be weighted by the inverse of the estimated covariance matrix of R : G (R , . . . , R ) denoted by V (R ), that is, G NG G R* : [V (R )]\R G G G

(12.4.5)

The weighted Schoenfeld residuals have better diagnostic power and are used more often than the unweighted residuals in assessing the proportional hazards assumption. To simplify the computations, Grambsch and Therneau (1994) suggested an approximation of [V (R )]\ in (12.4.5): G [V (R )]\ < rV (b ) G where r is the number of events or the number of observed uncensored survival times and V (b ) is the estimated covariance matrix of b in (12.1.13). With this approximation, the weighted Schoenfeld residuals in (12.4.5) can be approximated by R* : rV (b )R G G

(12.4.6)

The graphs of deviance and Schoenfeld residuals against survival time or a covariate can be used to check the adequacy of the proportional hazards model. The presence of certain patterns in these graphs may indicate departures from the proportional hazards assumption, while extreme departures from the main cluster indicate possible outliers or potential stability problems of the model. Example 12.10 Consider the proportional hazards model (12.2.2) for the CVD data. Using the estimated survivorship function with covariates, we obtain the extended Cox—Snell residual R values and plot the Kaplan—Meier G estimate of the survivorship function of the R ’s. Figure 12.8 gives the extended G Cox—Snell residual plot. The conﬁguration is very close to a 45° line, indicating that the proportional hazards model (12.2.2) provides a reasonable ﬁt to the data. Figure 12.9 plots the deviance residuals against t. Roughly speaking, the residuals are distributed symmetrically around zero between 93 and 3 with no peculiar patterns. Larger positive (negative) residuals are associated with smaller (larger) t values. The deviance residuals suggest that the proportional hazards model provides a reasonable ﬁt to the data.

      

333

Figure 12.8 Cox—Snell residuals plot from the ﬁtted Cox proportional hazards model on the CVD data.

The weighted Schoenfeld residuals versus AGE, LACR, and LTG are given in Figures 12.10 to 12.12. In all these graphs, the residuals are distributed symmetrically around zero except that in Figure 12.12, there are two outliers in the upper right corner. These extremely large residuals are from people with exceptionally high values of triglyceride. A large number of the residuals equal zero or are very close to zero, particularly those for AGE and LACR, suggesting that the model is accurate in predicting the risk of developing CVD for these people. We also ﬁt several parametric models to the data. Table 12.9 gives the goodness of ﬁt assessments for ﬁve parametric models. The likelihood ratio test results suggest that the Weilbull regression model provides an adequate ﬁt (p : 0.2534). The Weilbull ﬁt also gives the largest BIC and AIC values, suggesting that the Weilbull ﬁt is best among these ﬁve models. As mentioned earlier, the Weilbull model is a proportional hazards model. Thus, the parametric model ﬁtting provides additional evidence that the proportional hazards model is adequate. Using the data set ‘‘C:EX12d4d1.DAT’’ in Example 12.4, the following SAS code is used to obtain the Cox—Snell, deviance, and weighted Schoenfeld residuals for AGE, LTG, and LACR in Example 12.10.

334

       

Figure 12.9 Deviance residuals from the ﬁtted Cox proportional hazards model on the CVD data.

data w1; inﬁle ‘c:ex12d4d1.dat’ missover; input t cens agea ageb sex smoke bmi lacr sbp ltg age htn dm; run; proc phreg data : w1 noprint; model t*cens(0) : age sex lacr ltg / ties : efron; output out : out1 logsurv : ls resdev : rdev wtressch : rage r2 rlacr rltg; run; data out1; set out1; rcs : -ls; run; proc lifetest data : out1 notable outs : ws noprint; time rcs*cens(0); run; data ws; set ws; mls : -log(survival); run; title ‘Cox-Snell Residuals (rcs) and -log(estimated survival function of rcs) (mls)’; proc print data : ws; var rcs mls;

      

335

Figure 12.10 Weighted Schoenfeld residuals from the ﬁtted Cox proportional hazards model on the CVD data.

Figure 12.11 Weighted Schoenfeld residuals from the ﬁtted Cox proportional hazards model on the CVD data.

336

       

Figure 12.12 Weighted Schoenfeld residuals from the ﬁtted Cox proportional hazards model on the CVD data.

run; title ‘Deviance residuals (rdev) and weighted Schoenfeld residuals for AGE, LACR and LTG’; proc print data : out1; var t age lacr ltg rage rlacr rltg rdev; run;

The following SPSS code can be used to obtain Cox—Snell and Schoenfeld residuals for AGE, and LACR and LTG. data list ﬁle : ‘c:ex12d4d1.dat’ free / t cens agea ageb sex smoke bmi lacr sbp ltg age htn dm coxreg t with age sex lacr ltg /status : cens event (1) /print : all /save : hazard resid presid.

Bibliographical Remarks An excellent expository paper on statistical methods for the identiﬁcation and



337

Table 12.9 Goodness-of-Fit Tests Based on Asymptotic Likelihood Inference in Fitting the CVD Data? Model Generalized gamma Log-logistic Lognormal Weibull Exponential Exponential

LL

LLR

p

BIC

AIC

9198.842 9203.322 9206.017 9199.494 9203.061 9203.061

— — 14.3505 1.3046 8.4385@ 7.1339A

— — 0.0002 0.2534 0.0147 0.0076

9217.113 9218.983 9221.678 9215.155 9216.112 9216.112

9212.842 9215.322 9218.017 9211.494 9213.061 9213.061

? LL, log likelihood; LLR, log-likelihood ratio statistic; p, probability that the respective chi-square random variable LLR. @ Compared to the generalized gamma ﬁt. A Compared to the Weibull ﬁt.

use of prognostic factors is that of Armitage and Gehan (1974). Many studies of prognostic factors have been published. A few recent ones are cited here: Well et al. (1998), Shipley et al. (1999), Marrison and Siu (2000), Seaman and Bird (2001), Bolard et al. (2001), Vasan et al. (2001), Young et al. (2001), Meisinger et al. (2002), Feskanich et al. (2002), Williams et al. (2002), and Bliwise et al. (2002). Cox’s regression model has stimulated the interest of many statisticians. A large number of papers on this model and related areas have been published since 1972. In addition to the articles cited earlier, the following are a few examples: Sasieni (1996), Alioum and Commenges (1996), Farrington (2000), Vaida and Xu (2000), and Zhang and Klein (2001). Survival data analysis methods are closely related to counting processes, particularly the proportional hazards model and residual analysis. The counting process approach requires a strong background in probability theory and stochastic processes and is beyond the scope of this book. Interested readers are referred to Fleming and Harrington (1991) and Andersen et al. (1993).

EXERCISES 12.1 (a) Consider the data in Exercise Table 3.1. In addition to the ﬁve skin tests, age and gender may also have prognostic values. Examine the relationship between survival and each of seven possible prognostic variables, as in Table 3.8. For each variable, group the patients according to different cutoff points. Estimate and draw the survival function for each subgroup using the product-limit method and then use the methods discussed in Chapter 5 to compare the survival

338

        distribution of the subgroups. Prepare a table similar to Table 3.8. Interpret your results. Is there a subgroup of any variable that shows signiﬁcantly longer survival times? (For the skin test results, use the larger diameter of the two.) (b) Consider the seven variables in part (a). Use Cox’s model to identify the most signiﬁcant variables. Compare your results with those obtained in part (a).

12.2 (a) Consider the data given in Exercise Table 3.3. Examine the relationship between remission duration and survival time for each of the nine possible prognostic variables: age, gender, family history of melanoma, and the six skin tests. Group the patients according to different cutoff points. Estimate and draw remission and survival curves for each subgroup. Compare remission and survival distribution of subgroups using the methods discussed in Chapter 5. Prepare tables similar to Table 3.8. (b) Use Cox’s regression model to identify the signiﬁcant variables in part (a) for their relative importance to remission duration and survival time. Check the appropriateness of the proportional hazards model using the signiﬁcant variables identiﬁed and the stratiﬁed analysis and weighted Shoenfeld residuals. Interpret the results. 12.3 Use the proportional hazards model to identify the most important factors related to survival time in the 157 diabetic patients in Exercise Table 3.4. Check the appropriateness of the model using all the methods discussed in Section 12.4 and interpret the results. 12.4 (a) Construct a table similar to Table 3.8 using the data given in Table 3.6. (b) Use the proportional hazards model to identify the most important factors related to survival time. (c) Is the proportional hazards model appropriate for this data set? 12.5 Using the data given in Table 12.4, perform similar analyses as in Examples 12.3 to 12.10 and discuss the results obtained.

Statistical Methods for Survival Data Analysis. Elisa T. Lee and John Wenyu Wang Copyright ¶ 2003 John Wiley & Sons, Inc. ISBN: 0-471-36999-7

C H A P T E R 13

Identiﬁcation of Prognostic Factors Related to Survival Time: Nonproportional Hazards Models

In Chapter 12 we discussed the proportional hazards model for the identiﬁcation of important prognostic factors, in which the covariates are assumed to be independent of time. We also assume that there is only one cause of failure; that is, the event or failure is allowed to occur only once for each person, and there is no correlation among failure times of different persons. However, in practice, the covariates may be observed more than once during the study, and their values change with time, failure may be due to more than one event or cause, the same event or failure may recur during a follow-up study, and the event or failure time observed may be from related persons in a family or from the same person at different times. In this chapter we discuss several models for these situations. The ﬁrst two models are extensions of the proportional hazards model to handle time-dependent covariates and to perform stratiﬁed analysis. Other models introduced in this chapter are for multiple causes of failure, recurrent events, and related observations.

13.1 MODELS WITH TIME-DEPENDENT COVARIATES In the Cox proportional hazards model, the ratio of hazard functions for any two persons is assumed to be independent of time t, or the covariates are not time-dependent. However, it is common in practice that a study include both time-dependent and time-independent covariates. For example, in a longitudinal study of heart disease, certain demographic variables, such as gender and race, do not change with time and are usually collected only once at the baseline examination. Other variables, such as lipids, may vary with time and are often collected in subsequent examinations. The partial likelihood function allowing time-dependent covariates has the same form as that in (12.1.7) except 339

340

       

that the covariates are now a function of time. That is, the partial likelihood function with time-dependent covariates is I L (b) : G

I exp[N b x (t )] H H HG G : N l + R(t ) exp[ b x (t )] G H H HJ G G

exp[bx (t )] G G l + R(t ) exp[bx (t )] G J G

(13.1.1)

where k is the number of distinct failure times, R(t ) is the risk set that contains G all persons at risk at time t , x (t ) : (x (t ), x (t ), . . . , x (t )) denotes G J G J G J G NJ G the covariates observed from person l at the ordered uncensored event time t , G and b : (b , b , . . . , b ) denotes the unknown coefﬁcients. For covariates that N are not time varying, their values are constant over time. For example, let x I denote gender of person k, then x (t) : x (0) : x for all t. Thus, in practice, I I I we usually have a mixture of non-time-dependent and time-dependent covariates in the likelihood function. The estimation procedure for the coefﬁcients, b , H is similar to that discussed in Chapter 12. We can also apply the model selection methods mentioned in Chapter 11 to select the optimal subset of covariates as the most important prognostic or risk factors. There are two kinds of time-dependent covariates: (1) covariates that are observed repeatedly at different follow-up time points prior to the occurrence of the event or the end of a study or the censored time; and (2) covariates that change with time according to a known mathematical function and covariates that have different values due to therapy, age, or the changes in medical conditions. The following example illustrates how the Cox proportional hazards model is extended to ﬁt observed survival or event time data with the ﬁrst kind of time-dependent covariates, that is, covariates observed several times before the event. Example 13.1 A study was conducted to examine whether biomarker proﬁles could be used for risk assessment and bladder cancer detection in a cohort of workers occupationally exposed to benzidine and at risk of bladder cancer (Hemstreet et al., 2001). These workers were free of bladder cancer at the time of initial (or baseline) examination and were reexamined at least once based on their risk assessments in a seven-year period. The event time considered in this study is the cancer-free time from baseline examination to last follow-up. To simplify the analysis, we consider only four covariates: age, level of benzidine exposure, and two biomarkers, M1 and M2. The level of benzidine exposure (LEX) is scored based on the worker’s job position in the factory and is considered ﬁxed (time independent). In addition, age (AGEB) and the two biomarkers M1B (:0 is negative, :1 if positive) and M2B (:0 if negative, :1 if positive) were measured at baseline examination (they are not changed with time). At subsequent examinations, age (AGET) and the two biomarkers, M1T and M2T, were measured again (they are changed with time) with the status of bladder cancer and the cancer-free time from baseline examination to subsequent examination (TR). We selected a subset of 61

  - 

341

persons from this study for this example. The data reproduced in Table 13.1 are solely for the purpose of illustrating the proportional hazards model with time-dependent covariates. Thus, the results should not be interpreted as the true ﬁndings of this large study. Table 13.1 gives the baseline and follow-up data from the 61 participants selected from the study. We use ID numbers to distinguish the data observed from different participants. For example, the person in the table with ID : 4 had LEX : 36, diagnosed as M1 positive and M2 negative (M1B : 1 and M2B : 0), and was 47.82 years old (AGEB : 47.82) at the baseline examination (time 0). He was diagnosed with negative M1 and M2 (M1T : 0 and M2T : 0) and without cancer at 42.94 months (TR : 42.94) from the baseline examination and at 51.39 years of age (AGET : 51.39) (thus 42.94 was considered a censored event time, CS : 0). His third examination was conducted at 67.06 months (TR : 67.06) and he was still cancer free with both M1 and M2 negative (M1T : 0 and M2T : 0) at 53.40 years old (AGET : 53.40) (thus 67.06 was considered a censored event time, CS : 0). In other words, for this person, AGET : 51.39, M1T : 0, and M2T : 0 during the time interval (0, 42.94] and AGET : 53.40, M1T : 0, and M2T : 0 during the time interval (42.94, 67.06]. The event time TR was censored at the end of the ﬁrst time interval (TR : 42.94 months, CS : 0) and also at the end of the second time interval (TR : 67.06 months, CS : 0). The left endpoint of a time interval is denoted as TL in the table. Thus, in this example, covariates LEX, AGEB, M1B, and M2B are ﬁxed for all time intervals, but AGET, M1T, and M2T are time-dependent covariates, which may change from one interval to another. To facilitate better understanding of (13.1.1.), we use only the data from the ﬁrst six people to illustrate how to construct the likelihood function (13.1.1.). If we have only the data from the ﬁrst six people, there are two (k : 2) distinct uncensored cancer-free times, t : 14.65 (observed from the person with ID : 2) and t : 24.61 (observed from the persons with ID : 1). At t , all six people are at risk and R(t ) contains all six. At time t , only four people (ID : 1, 3, 4, and 6) are at risk and R(t ) contains these four. The person with ID : 5 is censored at 14.78 months, prior to t . Table 13.2 gives those in the risk sets for t and t with values of the seven covariates. Let x (t ) : (LEX , AGEB , M1B , M2B , AGET (t ), M1T (t ), M2T (t )) J G J J J J J G J G J G denote the covariates from person l (ID : l) evaluated at the ordered uncensored event time t , i : 1, 2; l : 1, 2, . . . , 6, and b : (b , b , . . . , b ) denote the G unknown coefﬁcients. Then the ﬁrst term in (13.1.1) for t is exp[bx (t )] exp[bx (t )] J J

       

342

Table 13.1 Cancer-Free Times for Workers Exposed to Some Chemical Elements? ID 1 2 3 4 4 5 6 7 8 8 8 8 8 8 8 8 9 10 11 12 13 14 14 15 15 15 15 16 16 17 18 19 20 21 22 22 23 23 24 25 25 25 25 26 26 27 27 27 27

LEX

AGEB

M1B

M2B

AGET

M1T

M2T

CS

TR

TL

180 69 36 36 36 36 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 164 15 144 144 192 192 54 264 264 264 264 40 40 265 265 265 265

58.64 40.99 57.14 47.82 47.82 34.85 64.24 60.72 58.97 58.97 58.97 58.97 58.97 58.97 58.97 58.97 49.95 69.19 48.98 65.52 47.86 47.82 47.82 43.49 43.49 43.49 43.49 41.28 41.28 49.09 46.03 64.41 52.52 61.51 64.59 64.59 62.26 62.26 57.56 60.03 60.03 60.03 60.03 44.30 44.30 52.84 52.84 52.84 52.84

0 0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0; 0 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 1 1 1 1

60.70 42.21 60.72 51.39 53.40; 36.08 67.66 64.14 61.54 62.01 62.41 63.00 63.54 64.03 64.49 65.06 49.95 72.61 52.41 68.95 47.86 51.28 52.41 46.53 46.94 47.53 48.56 44.74 45.86 52.54 49.45 67.85 53.54 64.94 68.01 68.60 64.88 65.27 57.95 73.03 73.71 64.17 65.15 45.48 46.49 53.98 55.43 55.83 56.42

1 1 0 0 0 0 0 0 0 1 1 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 0 1 1 1 1 1 1 1 0 0 0 0

0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 1 0 0 0 0 1 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0

1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 1 1 0 0 0 1 0 1 0 0 0 1

24.61 14.65 42.97 42.94 67.06 14.78 41.03 41.00 30.82 36.40 41.26 48.33 54.83 60.71 66.17 73.07 41.00 41.03 41.20 41.17 41.43 41.43 54.97 36.50 41.43 48.46 60.85 41.56 54.93 41.43 41.03 41.23 12.32 41.10 41.13 48.16 31.47 36.17 4.67 36.07 44.19 49.68 61.44 14.13 26.25 13.73 31.18 35.91 42.97

0.00 0.00 0.00 0.00 42.94 0.00 0.00 0.00 0.00 30.82 36.40 41.26 48.33 54.83 60.71 66.17 0.00 0.00 0.00 0.00 0.00 0.00 41.43 0.00 36.50 41.43 48.46 0.00 41.56 0.00 0.00 0.00 0.00 0.00 0.00 41.13 0.00 31.47 0.00 0.00 36.07 44.19 49.68 0.00 14.13 0.00 13.73 31.18 35.91

  - 

343

Table 13.1 Continued ID 28 29 29 29 29 29 30 31 32 33 34 34 34 35 36 36 36 36 37 38 38 38 38 38 39 40 41 42 43 44 45 45 45 45 46 47 47 48 48 48 48 48 48 49 49 50 51 51 52

LEX

AGEB

M1B

M2B

AGET

M1T

M2T

CS

TR

TL

132 24 24 24 24 24 132 178 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50

68.19 62.22 62.22 62.22 62.22 62.22 68.27 64.07 65.88 70.82 60.53 60.53 60.53 62.99 63.01 63.01 63.01 63.01 63.86 61.15 61.15 61.15 61.15 61.15 61.02 61.08 49.50 49.81 49.09 47.07 63.69 63.69 63.69 63.69 55.77 60.84 60.84 50.09 50.09 50.09 50.09 50.09 50.09 62.41 62.41 73.88 44.68 44.68 62.67

0 1 1 1 1 0 0 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0

1 1 1 1 1 1 0 0 0 1 1 1 1 0 1 1 1 1 0 0 0 0 0 0 0 0 1 0 0 0 1 1 1 1 0 1 1 1 1 1 1 1 1 0 0 1 0 0 0

69.31 64.39 64.85 65.22 65.82 66.89 70.12 64.07 65.88 74.40 63.54 64.67 66.18 66.00 65.15 66.01 66.60 67.68 66.89 62.33 63.32 63.78 64.75 65.30 64.03 61.08 52.51 52.81 52.10 50.08 64.84 66.30 66.69 67.28 58.77 61.99 64.98 51.24 52.70 53.09 54.23 54.76 55.75 63.53 65.38 78,03 47.68 49.36 65.66

0 0 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 1 1 0 0 0 0 0 0 0 0 0 0 1 0 1 0 0 0 0 0 0 0 0 1 0 0

0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

1 0 0 0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

13.50 26.02 31.54 36.01 43.27 56.02 22.14 21.95 25.43 42.97 36.14 49.68 67.88 36.11 25.76 36.04 43.07 56.05 36.40 14.16 26.02 31.57 43.20 49.87 36.14 36.17 36.14 35.94 36.17 36.14 13.90 31.41 36.01 43.10 36.01 13.83 49.71 13.90 31.41 36.01 49.77 56.05 67.98 13.50 35.61 49.81 35.98 56.12 35.91

0.00 0.00 26.02 31.54 36.01 43.27 0.00 0.00 0.00 0.00 0.00 36.14 49.68 0.00 0.00 25.76 36.04 43.07 0.00 0.00 14.16 26.02 31.57 43.20 0.00 0.00 0.00 0.00 0.00 0.00 0.00 13.90 31.41 36.01 0.00 0.00 13.83 0.00 13.90 31.41 36.01 49.77 56.05 0.00 13.50 0.00 0.00 35.98 0.00

(Continued overleaf )

       

344

Table 13.1 Continued ID 53 53 53 53 54 5 5 5 5 56 57 58 58 59 60 60 61 61 61 61

LEX

AGEB

M1B

M2B

AGET

M1T

M2T

CS

TR

TL

275 275 275 275 57 57 57 57 57 57 57 57 57 57 0 0 0 0 0 0

74.28 74.28 74.28 74.28 39.52 76.22 76.22 76.22 76.22 62.41 67.64 80.61 80.61 67.78 47.35 47.35 40.98 40.98 40.98 40.98

0 0 0 0 0 1 1 1 1 0 0 0 0 1 0 0 1 1 1 1

1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 0 0 0 0

75.34 77.28 77.70 78.26 43.50 79.23 79.64 80.21 81.24 65.83 71.06 84.03 85.14 67.68 47.35 49.84 42.13 43.59 44.62 46.55

1 0 1 1 0 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0

1 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0 0 0 0

0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

12.75 36.04 41.07 47.80 47.80 36.07 41.10 47.84 60.29 41.10 41.10 41.10 54.37 72.12 13.83 43.70 13.83 31.38 43.70 66.92

0.00 12.75 36.04 41.07 0.00 0.00 36.07 41.10 47.84 0.00 0.00 0.00 41.10 0.00 0.00 13.83 0.00 13.83 31.38 43.70

? ID, participant ID number; LEX, level of exposure; AGEB, age at the baseline examimation; M1B and M2B, index functions of measure 1 and 2 at the baseline; M1B : 1 if measure 1 is positive and 0 if not; M2B : 1 if measure 2 is positive and 0 if not; AGET, age at the end of each time interval; M1T and M2T, index functions of measure 1 and 2 at the end of each time interval; M1T : 1 if measure 1 is positive and 0 if not; M2T : 1 if measure 2 is positive and 0 if not; CS : 0 if censored and 1 if not; TR, cancer-free time in months (or the right endpoint of time interval); TL, left endpoint of time interval.

where x (t ) : (69, 40.99, 0, 0, 42.21, 1, 0) is the column vector of covariates from person 2, whose cancer-free time is t : 14.65. The x (t )’s in the denominator are the covariate vectors observed J for the six people in the risk set R(t ) and are listed in Table 13.2. For example, x (t ) : (36, 57.14, 0, 0, 60.72, 0, 0). The second and also the last term in (13.1.1) for t : 24.61 is exp[bx (t )] exp[bx (t )] ; exp[bx (t )] ; exp[bx (t )] ; exp[bx (t )] where x (t ) : (180, 58.64, 0, 0, 60.70, 1, 0) and x (t )’s in the denominator J are the observed covariate vectors from the four persons (ID : 1, 3, 4, and 6)

345

0 0 0 1 1 0

180 69 36 36 36 15

1 2 3 4 5 6

58.64 40.99 57.14 47.82 34.85 64.24

LEX AGEB M1B 0 0 0 0 0 0

60.70 42.21 60.72 51.39 36.08 67.66

1 1 0 0 0 0

M2B AGET M1T

t : 14.65 (observed from individual with ID : 2)

ID

Ordered Event time

0 0 0 0 0 1

M2T 58.64 57.14 47.82 64.24

180 36 36 15

0

0 1

0

LEX AGEB M1B

0

0 0

0

67.66

60.72 51.39

60.70

0

0 0

1

M2B AGET M1T

t : 24.61 (observed from individual with ID : 1)

1

0 0

0

M2T

Table 13.2 Construction of the Partial Likelihood for the Cancer-Free Times from the First Six People with Time-Dependent Covariates

346

       

Table 13.3 Asymptotic Partial Likelihood Inference on Cancer-Free Time Data from Fitted Model with Time-Dependent Covariates 95% Conﬁdence Interval Variable

Regression Coefﬁcient

Standard Error

Chi-Square Statistic

p

Hazards Ratio

Lower

Upper

LEX M1T

0.007 1.361

0.003 0.645

5.593 4.449

0.018 0.035

1.01 3.90

1.00 1.10

1.01 13.81

in R(t ) (see Table 13.2 for details). The partial likelihood function for this reduced data set is the product of these two terms. The partial likelihood function for the entire data set in Table 13.1 can be constructed in a similar way and estimates of the coefﬁcients can be obtained using the Newton—Raphson method. The data format style in Table 13.1 is referred to as a counting process data format. The results of ﬁtting this model with time-dependent covariates and a stepwise selection method are given in Table 13.3. The coefﬁcients indicate that high levels of exposure and positive M1 at follow-up examination are positively related to the risk of a short cancer-free time. Assuming that other measures are the same, a person with a positive M1 at follow-up examination will have 3.9 times higher risk to develop bladder cancer than will someone with a negative M1. For every 1-unit increase in LEX, the risk will increase by 1%. Suppose that the text data ﬁle ‘‘C:EX1311.DAT’’ contains the data in Table 13.1 and the successive 11 columns give ID, LEX, AGEB, M1B, M2B, AGET, M1T, M2T, CS, TR, and TL. The following SAS code can be used to obtain the results in Table 13.3.

data w1; inﬁle ‘c:ex13d1d1.dat’ missover; input id lex ageb m1b m2b aget m1t m2t cs tr tl; run; title ‘‘Selected Cox proportional hazards model with time dependent covariates’’; proc phreg data : w1; model (tl,tr)*cs(0) : lex ageb m1b m2b aget m1t m2t / rl ties : efron selection : s; where tltr; run;

For the second type of time-dependent covariate (i.e., the covariate known to change with time according to a mathematical function), we simply use the known mathematical function to replace the covariate. Following is a hypothetical example to illustrate the use of SAS, SPSS, and BMDP.

  - 

347

Example 13.2 Suppose that we wish to ﬁt the proportional hazards model to a set of survival data that has been saved in a text ﬁle ‘‘C:EX1312.DAT’’. This set of data consists of survival time t, an indicator variable CENS (:1 for an uncensored observation and 0 for a censored observation) and three covariates, X1, X2, and X3. Furthermore, assume that X3 is known to change with time according to the function X3;log(t ; 1). In this case, the following SAS, SPSS, and BMDP code can be used to incorporate this time-dependent covariate with known mathematical relationship with time into the model.

data w1; inﬁle ‘c:ex1312.dat’ missover; input t cens x1 x2 x3; run; proc phreg data : w1; model t*cens(0) : x1 x2 z/ rl ties : efron; z : x3*log(t ; 1) run;

If the SPSS COXREG procedure is used, the code is data list ﬁle : ‘c:ex1312.dat’ free / t cens x1 x2 x3. time program Compute z : x3*log(t ; 1). coxreg t with x1 x2 z /status : cens event (1) /print : all /save : hazard resid presid.

For the BMDP 2L procedure, the code is

/input

/print /variable /form

/regress /function

ﬁle : ‘c:ex1312.dat’ . variables : 6. format : free. cova. names : t,cens, x1, x2, x3. time : t. status : cens. response : 1. covariates : x1, x2, z. add : z. z : x3*ln(time ; 1).

348

       

13.2 STRATIFIED PROPORTIONAL HAZARDS MODELS The proportional hazards model in (12.1.3) assumes that the ratio of the hazard functions of any two people with prognostic variables x and x is a constant, independent of time. This assumption may not always be met in practical situations. To accommodate the nonproportional cases, Cox’s model can be generalized using the concept of stratiﬁcation (Kalbﬂeisch and Prentice, 1980). The data can be stratiﬁed by a covariate: for example, age. If we consider two strata, say age 50 and 50 years, the model in (12.1.3) becomes two models:

h (t x) : h (t) exp b x : h (t) exp(bx ) G G H H G G

(13.2.1)

where i : 1, 2 for the two age strata. Notice that the underlying hazard function h (t) is assumed to be different for the two strata; however, the G regression coefﬁcients are the same for all strata. That is, we assume that the hazards for patients may be proportional within each stratum but not among different strata (or levels). The partial (marginal) likelihood function for all observations from the m strata is deﬁned as K L (b) : L (b) H H

(13.2.2)

where L (b) is the partial (marginal) likelihood function for the jth stratum. H The regression coefﬁcients b can be estimated by the Newton—Raphson method. For stratiﬁed models, the baseline survivorship function for each stratum is estimated separately based on the estimated regression coefﬁcients b and the data in that stratum alone by using the methods discussed in Section 12.3. Example 13.3 Consider the data given in Example 12.1.1. Suppose that we are not sure if the risk of dying for patients at least 50 years of age is proportional to that for patients less than 50 years and decide to do a stratiﬁed analysis. Two regression equations are therefore assumed: h (t x ) : h (t) exp(b x ) h (t x ) : h (t) exp(b x ) where h (t x ), the hazard function for patients under 50 years of age, and h (t x ), the hazard function for patients at least 50 years, are functions of cellularity, and h (t) and h (t) are the underlying hazard functions for the two groups. The results of the stratiﬁed analysis, b : 0.22, SE(b ) : 0.44, p : 0.31, and exp(b ) : 1.24, are close to those obtained earlier in the unstratiﬁed model.

   

349

Table 13.4 Asymptotic Partial Likelihood Inference on CVD-free Time Data from Fitted Models 95% Conﬁdence Interval Variable

Regression Coefﬁcient

Standard Error

Chi-Square Statistic

p

Hazards Ratio

Lower

Upper

1.04 1.38 1.02 1.01

1.10 3.26 1.22 2.20

1.04 1.07

1.09 1.26

Unstratiﬁed Model for All CV Ds AGE SEX LACR LTG

0.070 0.753 0.111 0.399

0.014 0.219 0.046 0.198

26.139 11.789 5.860 4.072

0.0001 0.0006 0.0155 0.0436

1.07 2.12 1.12 1.49

Gender-Stratiﬁed Model for All CV Ds AGE LACR

0.063 0.149

0.013 0.043

23.430 11.828

0.0001 0.0006

1.07 1.16

Gender-Speciﬁc Proportional Hazards Models Female SBP DM Male AGE LACR

0.022 0.986

0.006 0.373

13.962 6.973

0.0002 0.0083

1.02 2.68

1.01 1.29

1.03 5.57

0.069 0.125

0.018 0.058

14.453 4.555

0.0001 0.0328

1.07 1.13

1.03 1.01

1.11 1.27

However, this may not always be the case. Because the model is stratiﬁed by age group and no speciﬁc relationship is assumed between the hazard ratio of patients at least 50 years old and those under 50, tests of signiﬁcance of the regression coefﬁcients for the other variables are adjusted for age.

Example 13.4 In Example 12.5 we used the stepwise selection method to ﬁt the proportional hazards model to the CVD data in Example 12.3. We reanalyze the data using a gender-stratiﬁed proportional hazards model. Results from the unstratiﬁed model and the stratiﬁed model (with a stepwise selection procedure) are given in Table 13.4. The unstratiﬁed model identiﬁes AGE, SEX, LACR (logarithm of the ratio of urinary albumin and creatinine), and LTG (logarithm of triglycerides) as signiﬁcant covariates for the time to CVD. The gender-stratiﬁed model with the stepwise selection procedure identiﬁes AGE and LACR as the most signiﬁcant covariates. The coefﬁcients are close to those obtained in the unstratiﬁed model. The log[-log(S(t))] at the averages of covariates AGE and LACR for the two strata are plotted in Figure 12.7. The two curves look

350

       

parallel to each other. It suggests that stratiﬁcation for this set of data does not provide more information for the study. Moreover, the sex-speciﬁc proportional hazards model (at the bottom of Table 13.4) show that systolic blood pressure (SBP) and diabetes are signiﬁcant covariates related to the risk of CVD in women and AGE and LACR in men. Thus, the gender-speciﬁc models provide more information and suggest that there are differences in CVD risk factors among men and women. The method of stratiﬁcation is useful in cases when the observations from different strata are considered independent, conditional on the stratiﬁed variable, or one is not interested in the effect of the stratiﬁed variable itself on the outcome but in the interactions of the stratiﬁed variable with the other covariates in the model and does not know the exact forms of the interactions. It is clear that modeling observations from different strata separately can provide more information than either stratiﬁcation or unstratiﬁcation if the sample size in each stratum is large enough. Using the data ﬁle ‘‘C:EX12d4d1.DAT’’ deﬁned in Example 12.4, the following SAS code can be used to obtain the results in Table 13.4 and Figure 12.7. data w1; inﬁle ‘c:ex12d4d1.dat’ missover; input t cens agea ageb sex smoke bmi lacr sbp ltg age htn dm; run; title ‘‘Unstratiﬁed model’’; proc phreg data : w1; model t*cens(0) : age sex bmi lacr sbp ltg smoke htn dm / selection: b ties : efron; run; title ‘‘gender stratiﬁed model’’; proc phreg data : w1; model t*cens(0) : age bmi lacr sbp ltg smoke htn dm / selection : b ties : efron; strata sex; run; proc phreg data : w1 noprint; model t*cens(0) : age lacr / ties : efron; strata sex; baseline out : bas1 loglogs : lmls; run; title ‘‘Log-logS from ﬁtting a gender stratiﬁed model’’; proc print data : bas1; var sex age lacr t lmls; run; proc sort data : w1; by sex; run; title ‘‘gender-speciﬁc models’’;

   

351

proc phreg data : w1; model t*cens(0) : age bmi lacr sbp ltg smoke htn dm / selection : b ties : efron; by sex; run;

The following SPSS code can also be used. In this case, the data for women and men are assumed to be in the ﬁles ‘‘C:EX12d4d1a.DAT’’ and ‘‘C:EX12d4d1b.DAT’’ separately. data list ﬁle : ‘‘c:ex12d4d1.dat’’ free / t cens agea ageb sex smoke bmi lacr sbp ltg age htn dm. coxreg t with age sex bmi lacr sbp ltg smoke htn dm /status : cens event (1) /method : bstep age sex bmi lacr sbp ltg smoke htn dm /criteria pin (0.05) pout (0.05) /print : all coxreg t with age bmi lacr sbp ltg smoke htn dm /status : cens event (1) /strata : sex /method : bstep age bmi lacr sbp ltg smoke htn dm /criteria pin (0.05) pout (0.05) /print : all coxreg t with age lacr /status : cens event (1) /strata : sex /print : all /save : lml. data list ﬁle : ‘‘c:ex12d4d1a.dat’’ free / t cens agea ageb sex smoke bmi lacr sbp ltg age htn dm. coxreg t with age bmi lacr sbp ltg smoke htn dm /status : cens event (1) /method : bstep age bmi lacr sbp ltg smoke htn dm /criteria pin (0.05) pout (0.05) /print : all data list ﬁle : ‘‘c:ex12d4d1b.dat’’ free / t cens agea ageb sex smoke bmi lacr sbp ltg age htn dm. coxreg t with age bmi lacr sbp ltg smoke htn dm /status : cens event (1) /method : bstep age bmi lacr sbp ltg smoke htn dm /criteria pin (0.05) pout (0.05) /print : all

For the BMDP 2L procedure, the following code can be used. /input

ﬁle : ‘c:ex12d4d1.dat’ . variables : 13. format : free.

352

       

/print

cova. Survival. names : t,cens, agea, ageb, sex, smoke, bmi, lacr, sbp, ltg, age, htn, dm. time : t. status : cens. response : 1. covariates : age, smoke, bmi, lacr, sbp, ltg, htn, dm. strata : sex. step : phh.

/variable /form

/regress

/input

/print /variable /form

/regress

/input

/print /variable /form

/regress

ﬁle : ‘c:ex12d4d1a.dat’ . variables : 13. format : free. cova. Survival. names : t,cens, agea, ageb, sex, smoke, bmi, lacr, sbp, ltg, age, htn, dm. time : t. status : cens. response : 1. covariates : age, smoke, bmi, lacr, sbp, ltg, htn, dm. step : phh. ﬁle : ‘c:ex12d4d1b.dat’ . variables : 13. format : free. cova. Survival. names : t,cens, agea, ageb, sex, smoke, bmi, lacr, sbp, ltg, age, htn, dm. time : t. status : cens. response : 1. covariates : age, smoke, bmi, lacr, sbp, ltg, htn, dm. step : phh.

13.3 COMPETING RISKS MODEL All the methods for prognostic factor analysis discussed so far deal with a single type of failure time for each study subject. This may be a perfectly acceptable way to proceed in many cases. However, in some situations, failure on an person may be due to several distinct causes. It may be desirable to distinguish different kinds of events that may lead to failure and treat them differently in the analysis. For example, to evaluate the efﬁcacy of heart transplants, one would certainly want to treat deaths due to heart failure differently from deaths due to other causes, such as accident and cancer. In a

  

353

mortality study, it may be more interesting to study separately deaths due to heart disease, diabetes, cancer, and others than to combine all the causes. These different causes of failure are considered as competing events, which introduce competing risks. Thus, problems arising in the analysis of data with multiple causes are commonly referred to as competing risk problems. We will see later that competing risk analysis, in general, requires no inference methods other than those introduced in Chapters 11 and 12. We focus on using the proportional hazards model to identify signiﬁcant prognostic or risk factors when competing risks are present. Readers interested in additional details are referred to Kalbﬂeisch and Prentice (1980). Let T be the survival time, x the covariate vector, and J the type or cause of failure. We deﬁne a type- or cause-speciﬁc hazard function h (t; x) H h (t; x) : lim H R

P(t T t ; t, J : j T t, x) ,

t

j : 1, . . . , m

(13.3.1)

In words, h (t; x) is the instantaneous failure rate of cause j at time t given x H and in the presence of other (m 9 1) causes of failure. The only difference between (13.3.1) and the hazard function deﬁned in Chapter 2 is the appearance of J : j. Equation (13.3.1) is a type- or cause-speciﬁc hazard function, which is very much the same as the ordinary hazard function except that the event is of a speciﬁc type. The overall hazard of failure is the sum of all the type-speciﬁc hazards, that is, h(t; x) : h (t; x) H H

(13.3.2)

provided that the failure types are mutually excluded. Based on (2.15), we can deﬁne the function .

S (t; x) : exp 9 H

R

h (u; x) du , H

j : 1, . . . , m

(13.3.3)

However, these functions cannot, in general, be interpreted as survivorship functions when m 1. Let t t % t denote the failure times for H H HIH failures of type j, j : 1, . . . , m. Assuming proportional hazards, the hazard function in (13.3.1) can be written as h (t; x) : h (t) exp(b x), H H H

j : 1, . . . , m

(13.3.4)

which can be generalized for time-dependent covariates by replacing x with x(t), that is, h (t; x) : h (t) exp[b x(t)], H H H

j : 1, . . . , m

(13.3.5)

354

       

The partial likelihood function for the model in (13.3.5) is K L: H

I exp[b x (t )] H HG HG H exp[b x (t )] H J HG G l + R(tHG)

(13.3.6)

where R(t ) is the risk set at t . The estimation of the coefﬁcients and HG HG identiﬁcation of signiﬁcant covariates can be carried out exactly the same way as described in Chapters 11 and 12 by treating failure times of types other than j as censored observations. This is perhaps the most important concept in competing risks analysis. It is because the basic assumption for a competing risks model is that the occurrence of one type of event removes the person from risk of all other types of events and the person will no longer contribute to the successive risk set. Furthermore, there is nothing to prevent one from choosing different types of models for different h (t; x)’s. For example, in a mortality H study we might choose a proportional hazards model for heart disease and a parametric model for diabetes. The coefﬁcient vector b in (13.3.6) indicates the effects of the covariates for H event type j. If any covariates are not related to a particular type or cause, they may be set to 0. If b are the same for all j, the model in (13.3.5) reduces to the H proportional hazards model in Chapter 12. The following example illustrates the proportional hazards model with competing risks. Example 13.5 Let us again use the CVD data in Example 12.3. The event types are non-CVD (DG : 0), stroke (DG : 1), CHD (DG : 2), and the other CVDs (DG : 3). If one is interested in all CVD no matter whether it is stroke, CHD, or the other CVDs, the competing risks model reduces to a general CVD event model, the times (T) to CVD for DG : 1, 2, 3 are uncensored event times, and the other times are censored (DG : 0). An indicator variable, CS, can be used to indicate the censoring status; that is, CS : 1 if DG : 1, 2, 3, and CS : 0 otherwise. The result from ﬁtting the proportional hazards model with the backward selection method is given in section (a) of Table 13.5. If one considers strokes only, the indicator variable CS has to be deﬁned differently; that is, CS : 1 if DG : 1 and CS : 0 if DG : 0, 2 and 3. This means that in addition to non-CVD, the event time of CHD and the other CVDs are treated as censored observations. Note that we will remove a person from the risk set after his or her ﬁrst CVD event time in constructing the likelihood function for the modiﬁed data even if the event was not a fatal event. For stroke, age is the only signiﬁcant variable [section (b) in Table 13.5]. We call this model a marginal model for strokes. Similarly, if only CHD, other CVDs, or either stroke or CHD are of interest, the respective modiﬁcation will be CS : 1 if DG : 2 and CS : 0 otherwise (CHD only); CS : 1 if DG : 3 and CS : 0 otherwise (other CVD only); or CS : 1 if DG : 1, 2 and CS : 0 otherwise (either stroke or CHD). The results of these three ﬁts with the backward selection method are shown in Table 13.5 (c)—(e). The results suggest

  

355

Table 13.5 Asymptotic Partial Likelihood Inference on CVD Event Time Data from the Fitted Competing Risks Models 95% Conﬁdence Interval Variable

Regression Coefﬁcient

Standard Error

Chi-Square Statistic

p

Hazards Ratio

Lower

Upper

1.07 2.12 1.12 1.49

1.04 1.38 1.02 1.01

1.10 3.26 1.22 2.20

1.08

1.03

1.12

1.07 2.64 1.04 3.02

1.03 1.39 1.01 1.79

1.12 5.02 1.08 5.09

1.02 1.01 1.12

1.17 8.91 1.67

1.04 1.25 1.32

1.11 3.20 2.88

(a) Model for All CVDs AGE SEX LACR LTG

0.070 0.753 0.111 0.399

0.014 0.219 0.046 0.198

26.139 11.789 5.860 4.072

0.0001 0.0006 0.0155 0.0436

(b) Marginal Model for Strokes AGE

0.072

0.021

12.092

0.0005

(c) Marginal Model for CHDs AGE SEX BMI LTG

0.069 0.970 0.040 1.106

0.020 0.329 0.017 0.266

11.622 8.716 5.162 17.234

0.0007 0.0032 0.0231 0.0001

(d) Margial Model for Other CVDs AGE SEX LACR

0.087 1.100 0.315

0.033 0.555 1.101

6.874 3.937 9.745

0.0087 0.0472 0.0018

1.09 3.01 1.37

(e) Marginal Model for Strokes or CHDs AGE SEX LTG

0.072 0.692 0.665

0.015 0.239 0.200

23.555 8.362 11.095

0.0001 0.0038 0.0009

1.07 2.00 1.94

that signiﬁcant risk factors differ for different types of CVD events. Age is the only factor common to all the CVD events. Thus, competing risks models provide an opportunity to separate any one or more speciﬁc types of event or cause of death from all other types or causes. In practice, it is not necessary to ﬁt a model to every type or cause. Suppose that ‘‘C:EX13d3d1.DAT’’ is a text data ﬁle that contains 14 columns similar to Table 12.4 and the successive columns give T, CENS, DG, AGEA, AGEB, SEX, SMOKE, BMI, LACR, SBP, LTG, AGE, HTN, and DM. The following SAS code can be used to obtain the model for stroke in Table 13.5. These codes can easily be modiﬁed to obtain the results for CHD,

356

       

other CVD, and stroke/CHD. data w1; inﬁle ‘c:ex13d3d1.dat’ missover; input t cens dg agea ageb sex smoke bmi lacr sbp ltg age htn dm; run; title ‘‘Model for stroke event times’’; proc phreg data : w1; model t*dg(0, 2, 3) : age sex smoke bmi lacr sbp ltg htn dm / rl selection : b ties : efron; run;

The following SPSS code can be used. data list ﬁle : ‘‘c:ex13d3d1.dat’’ free / t cens dg agea ageb sex smoke bmi lacr sbp ltg age htn dm. coxreg t with age sex bmi lacr sbp ltg smoke htn dm /status : dg event (1) /method : bstep age sex bmi lacr sbp ltg smoke htn dm /criteria pin (0.05) pout (0.05) /print : all

The following code is for the BMDP 2L procedure. /input

/print /variable /form

/regress

ﬁle : ‘c:ex13d3d1.dat’ . variables : 14. format : free. cova. Survival. names : t,cens, dg, agea, ageb, sex, smoke, bmi, lacr, sbp, ltg, age, htn, dm. time : t. status : dg. response : 1. covariates : age, sex, smoke, bmi, lacr, sbp, ltg, htn, dm. step : phh.

13.4 RECURRENT EVENTS MODELS So far we have considered events or failures that are allowed to occur only once. Even in competing risks models, the occurrence of one type of event removes a person from the risk set thereafter. However, in practice the failures on an individual may be recurrences of essentially the same event, such as tumor recurrences after surgeries, or may be successive events of entirely different types, such as strokes and heart attacks. When data include recurrent events, regression models such as the proportional hazards model become much more mathematically complicated and often involve counting process

  

357

theory, which is beyond the scope of this book. A number of regression models have been proposed in the literature. In this section we introduce three models that can be considered as extensions of the Cox proportional hazards model. We keep the mathematics to a minimum and use examples to show how these models can be used to identify important prognostic or risk factors with the aid of available computer software. The three models are based on Prentice et al. (1981), Andersen and Gill (1982), and Wei et al. (1989). All three models are proportional hazards models, and the likelihood functions of these models are constructed differently, primarily in the risk set at the uncensored observations. Readers interested in details are referred to the papers cited above. Prentice et al. Model In their 1981 paper, Prentice, Williams, and Peterson (PWP) proposed two models for recurrent events. Both PWP models can be considered as extensions of the stratiﬁed proportional hazards model with strata deﬁned by the number and time of the recurrent events. The hazard function is extended beyond the person’s ﬁrst event to cover subsequent events. In the ﬁrst PWP model, follow-up time starts at the beginning of the study (true time 0) and the hazard function of the ith person can be written as h(t b , x (t)) : h (t) exp[b x (t)] Q G Q G Q

(13.4.1)

where the subscript s represents the stratum that the person is in at time t. The ﬁrst stratum includes people who have at least one recurrence or are censored without recurrence, the second stratum includes people who have at least two recurrences or are censored after the ﬁrst recurrence, and so on. A person moves from stratum 1 (s : 1) to stratum 2 (s : 2) following his or her ﬁrst recurrent event and remains in stratum 2 until the second recurrent event takes place or becomes a censor observation (no more recurrent event). The h (t) in Q (13.4.1) is the stratum-speciﬁc underlying hazard. Notice that in (13.4.1), the coefﬁcients are stratum-speciﬁc also. Let t % t denote the d ordered distinct failure times in stratum s, Q QB Q x (t ) the covariate Qvector of a subject in stratum s who fails at time t , x (t ) QG QG QG QJ QG the covariate vector of subject l in stratum s at time t , and R(t, s) the set of QG persons at risk in stratum s just prior to time t. Note that the risk set R(t, s) includes only those persons who have experienced the ﬁrst s 9 1 recurrent events. Then the partial likelihood for the ﬁrst model in (13.4.1) is BQ exp[b x (t )] Q QG QG L (b) : l + R(t ,s) exp[b x (t )] s1 QG Q QJ QG G

(13.4.2)

The following example illustrates the construction of the likelihood function and the necessary data arrangements for using SAS, SPSS, or BMDP to carry out the analysis.

358

       

Example 13.6 We use the tumor recurrence data from bladder cancer patients (Andrews and Herzberg, 1985; Wei et al., 1989) in a clinical trial to compare three treatments, which was conducted by the Veterans Administration Cooperative Urological Research Group (Byar, 1980). All patients had superﬁcial bladder tumors when they entered the study. These tumors were removed and the patients were randomized into three treatment groups: placebo, thiotepa, and pyridoxine. During the follow-up period many patients had one or more recurrences of tumors and new tumors were removed when discovered. In this example we use the tumor recurrence data from 86 patients who received either placebo or thiotepa. Only the ﬁrst four recurrence times are considered. The data set, reproduced in Table 13.6, includes treatment (1, placebo; 2, thiotepa) follow-up time, initial number of tumors (N), initial tumor size (S) in centimeters, and recurrent time. Each recurrent time of a patient was measured from the date of ﬁrst treatment. In this case, the event of interest is tumor recurrence and the strata are deﬁned by the number of recurrences (NRs).To use SAS and other software to ﬁt data with the model (13.4.1), the data must be rearranged in a certain format by stratum. To facilitate illustration, we select six patients from Table 13.6 and place the data of these six patients in Table 13.7. The follow-up and recurrence times are also shown in Figure 13.1. From the ﬁgure we see that stratum 1 includes patients 1 (censored at 9 months), 2 (censored at 59 months), 3 (ﬁrst recurrent at 3 months), 4 (ﬁrst recurrent at 12 months), 5 (ﬁrst occurrence at 6 months), and 6 (ﬁrst occurrence at 3 months). The time intervals, (TL, TR], are (0,9], (0,59], (0,3], (0,12], (0,6], and (0,3], respectively. These intervals are used to determine the risk set in the stratum-speciﬁc likelihood function in (13.4.2), and the patients in the stratum were at risk only in these time intervals. To use software packages such as SAS, BMDP, and SPSS, we need to rearrange the data by stratum. Table 13.8 gives the rearranged data. Note that the six patients in stratum 1 are arranged in ascending order according to the right end of the time interval. Also introduced in this table are T1—T4, N1—N4, and S1—S4, giving the treatment received, initial tumor number, and initial tumor size of the patients for the four strata, respectively. These variables are set to be zero in the other strata except the stratum they are in. For example, for patients in stratum 1, T2—T4, N2—N4, and S2—S4 are set to be zero because these six patients are in stratum 1, not in stratum 2, 3, or 4. Stratum 2 includes those patients who had one recurrence and had either another recurrence or were censored at end of follow-up. Therefore, stratum 2 has patients 3 (censored at 14 months after the ﬁrst recurrence), 4 (second recurrence at 16 months), 5 (second recurrence at 12 months), and 6 (second recurrence at 15 months). The time intervals between successive recurrences for these four patients are (3, 14], (12,16], (6,12], and (3,15], respectively. The rearranged data in order of the right end of the intervals are given in Table 13.8. Strata 3 and 4 are constructed in a similar way. Once the data are rearranged exactly as in Table 13.8, SAS and other software can be used to perform the analysis. This data arrangement also facilitates explanation of the likelihood function

  

359

Table 13.6 Tumor Recurrence Data for Patients with Bladder Cancer? Recurrence Time Treatment Group 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Follow-up Time

Initial Number

Initial Size

0 1 4 7 10 10 14 18 18 18 23 23 23 23 24 25 26 26 26 28 29 29 29 30 30 30 31 32 34 36 36 37 40 40 41 43 43 44 45 48 49 51 53 53 59 61 64

1 1 2 1 5 4 1 1 1 1 3 1 1 3 2 1 1 8 1 1 1 1 4 1 1 2 1 1 2 2 3 1 4 5 1 1 2 2 1 1 1 3 1 3 1 3 1

1 3 1 1 1 1 1 1 3 1 3 3 1 1 3 1 2 1 4 2 4 2 1 6 5 1 3 2 1 1 1 2 1 1 2 1 6 1 1 1 3 1 7 1 1 2 3

1

2

3

4

6 5 12

16

10 3 3 7 3

15 16 9 10 15

1 2 25

26

28 2 3 12

30 17 6 15

22 8 24

12

17 19

22 23

24 29

6 11

9 20

26

35 17 3

15

46

51

2 5

15 14

24 19

30 27

23 21 16 25

24

29 9 16 3 6 3 9 18

(Continued overleaf )

360

       

Table 13.6 Continued Recurrence Time Treatment Group 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Follow-up Time

Initial Number

Initial Size

64 1 1 5 9 10 13 14 17 18 18 19 21 22 25 25 25 26 27 29 36 38 39 39 40 41 41 43 44 44 45 46 46 49 50 50 54 54 59

2 1 1 8 1 1 1 2 5 5 1 5 1 1 1 1 1 1 1 2 8 1 1 6 3 3 1 1 1 6 1 1 1 3 1 4 3 2 1

3 3 1 1 2 1 1 6 3 1 3 1 1 1 3 5 1 1 1 1 3 1 1 1 1 2 1 1 1 1 2 4 4 3 1 1 4 1 3

1

2

3

4

2

8

12

13

3

1

3

5

17 2 17

19

5

6 6 2 26

12

35

22 4 24

23 16 26

1

27

2

13

27 23 29

32 27 40

20

23

27

24

47

2

4 38

Source: Wei et al (1989) and StatLib web site: http//lib.stat.cmu.edu/datasets/tumor. ? Treatment group: 1, placebo; 2, thioteps. Follow-up time and recurrence time are measured in months. Initial size is measured in centimeters. Initial number of 8 denotes eight or more initial tumors.

  

361

Table 13.7 Six of 86 Bladder Cancer Patients from the Tumor Recurrence Data? Recurrence Time Patient ID 1 2 3 4 5 6

Treatment Group

Follow-up Time

Initial Number

Initial Size

1

2

3

4

1 0 1 0 1 0

9 59 14 18 26 53

1 1 2 1 1 3

2 1 6 1 1 1

3 12 6 3

16 12 15

13 46

51

? Treatment group: 0, placebo; 1, thiotepa. Following-up time and recurrence time are measured in months. Initial size is measured in centimeters for the largest initial tumor.

in (13.4.2). We use stratum 2 to show the second product in (13.4.2). In stratum 2 (s : 2), d : 3 (there are three uncensored observations: patients 5, 6 and 4, Q according to the ordered recurrent times, 12, 15, and 16 months). Therefore, the second product is the product of three terms, one for each of these three patients. Using the notations in (13.4.2), we renumber them as patient i : 1, 2, and 3, respectively. The risk set at the ﬁrst uncensored time t in stratum 2

Figure 13.1 Graphical presentation of recurrence times of the six patients in Table 13.7 (numbers in circle indicate the number of recurrences).

362

       

Table 13.8 Rearranged Data from Table 13.7 for Fitting PWP Model with NR-Indexed Coefﬁcients? ID

NR TL TR CS

3 1 0 6 1 0 5 1 0 1 1 0 4 1 0 2 1 0 ———————— 5 2 6 3 2 3 6 2 3 4 2 12 ———————— 5 3 12 4 3 16 6 3 15 ———————— 5 4 13 6 4 46

3 3 6 9 12 59 ——— 12 14 15 16 ——— 13 18 46 ——— 26 51

T1

T2

T3

T4 N1 N2 N3 N4 S1

S2

S3

S4

1 1 0 0 0 2 0 0 0 6 0 0 0 1 0 0 0 0 3 0 0 0 1 0 0 0 1 1 0 0 0 1 0 0 0 1 0 0 0 0 1 0 0 0 1 0 0 0 2 0 0 0 1 0 0 0 0 1 0 0 0 1 0 0 0 0 0 0 0 0 1 0 0 0 1 0 0 0 ————————————————————————————————— 1 0 1 0 0 0 1 0 0 0 1 0 0 0 0 1 0 0 0 2 0 0 0 6 0 0 1 0 0 0 0 0 3 0 0 0 1 0 0 1 0 0 0 0 0 1 0 0 0 1 0 0 ————————————————————————————————— 1 0 0 1 0 0 0 1 0 0 0 1 0 0 0 0 0 0 0 0 1 0 0 0 1 0 1 0 0 0 0 0 0 3 0 0 0 1 0 ————————————————————————————————— 0 0 0 0 1 0 0 0 1 0 0 0 1 1 0 0 0 0 0 0 0 3 0 0 0 1

? ID, patient ID number; NR, number of recurrence, where 1 : ﬁrst recurrence, 2 : second recurrence, and so on; TL and TR, left and right ends of time interval (TL, TR) deﬁned by the successive rcurrence times and the follow-up time, where TR denotes either the successive recurrence time or the follow-up time; CS, censoring status, where 0 : censored, 1 : uncensored; T1 to T4, treatment group; N1 to N4, initial number of tumors; S1 to S4, initial size.

(observed from patient 5), or R(t , 2) includes patients in stratum 2, whose recurrent times, censored or not, are at least 12 (t ) months. Therefore, R(t , 2) includes all four patients in stratum 2. Similarly, the risk set at the second uncensored time t in stratum 2, R(t , 2), includes two patients (patients 6 and 4), and R(t , 2) includes only one patient (patient 4). Thus, using the ID in Table 13.7, let x —x denote the covariate vectors for patients 3—6 in stratum 2, the second product in (13.4.2) is exp[b x (t )] B G G exp[b x (t )] J G G l + R(tG ,2)

exp(b x ) exp(b x ) ; exp(b x ) ; exp(b x ) ; exp(b x ) exp(b x ) exp(b x ) ; ; (13.4.3) exp(b x ) ; exp(b x ) exp(b x ) where the x’s represent the covariate vector (T1, T2, T3, T4, N1, N2, N3, N4, S1, S2, S3, S4). For example, x : (0, 1, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0). It is clear that :

  

363

in this model the regression coefﬁcients are stratum speciﬁc. They represent the importance of the coefﬁcient for patients in different strata or patients who had different numbers of recurrent events. If the primary interest is the overall importance of the covariates, regardless of the number of recurrences or if it can be assumed that the importance of covariates is independent of the number of recurrences, T1—T4, N1—N4, and S1—S4 can be combined into a single variable. As shown in Table 13.9, the three covariates are named TRT, N, and S for the six patients, and coefﬁcients common to all strata can be estimated. Data sets that have been so rearranged are ready for SAS and other software. To use SAS and other software, the entire data set in Table 13.6 must ﬁrst be rearranged as in Table 13.8 or 13.9. This can also be accomplished using a computer. Table 13.10 gives the results from ﬁtting the PWP model to the bladder tumor data in Table 13.6 with stratum-speciﬁc coefﬁcients and common coefﬁcients. None of the stratum-speciﬁc covariates is signiﬁcant except N1, the initial number of tumors in stratum 1 patients (p : 0.0017). There is no signiﬁcant difference between the two treatments in any stratum, and the size of the initial tumor has no signiﬁcant effect on tumor recurrence. When stratiﬁcation is ignored, the results are similar (the second part of Table 13.10). The number of initial tumors is the only signiﬁcant prognostic factor, and the risk of recurrence increase would increase almost 13% for every one-tumor increase in the number of initial tumors.

Table 13.9 Rearranged Data from Table 13.7 for Fitting PWP Model with Common Coefﬁcients? ID

NR

TL

TR

CS

TRT

N

S

3 1 0 3 1 1 2 6 6 1 0 3 1 0 3 1 5 1 0 6 1 1 1 1 1 1 0 9 0 1 1 2 4 1 0 12 1 0 1 1 2 1 0 59 0 0 1 1 ———————————————————————————————————————————— 5 2 6 12 1 1 1 1 3 2 3 14 0 1 2 6 6 2 3 15 1 0 3 1 4 2 12 16 1 0 1 1 ———————————————————————————————————————————— 5 3 12 13 1 1 1 1 4 3 16 18 0 0 1 1 6 3 15 46 1 0 3 1 ———————————————————————————————————————————— 5 4 13 26 0 1 1 1 6 4 46 51 1 0 3 1 ? TRT, treatment group; N, initial number; S, initial size.

364

       

Table 13.10 Asymptotic Partial Likelihood Inference on the Bladder Cancer Data from Fitted PWP Models with Stratum-speciﬁc or Common Coefﬁcients 95% Conﬁdence Interval Variable

Regression Coefﬁcient

Standard Error

Chi-Square Statistic

p

Hazards Ratio

Lower

Upper

0.591 0.604 1.151 1.052 1.269 0.976 1.051 1.227 1.072 0.852 1.183 1.009

0.318 0.273 0.308 0.223 1.094 0.818 0.731 0.763 0.879 0.670 0.698 0.519

1.097 1.339 4.305 4.963 1.472 1.164 1.511 1.971 1.308 1.083 2.005 1.961

0.716 1.127 0.992

0.469 1.015 0.860

1.094 1.251 1.144

Model with Stratum-Specific Coefficients T1 T2 T3 T4 N1 N2 N3 N4 S1 S2 S3 S4

90.526 90.504 0.141 0.050 0.238 90.025 0.050 0.204 0.070 90.161 0.168 0.009

0.316 0.406 0.673 0.792 0.076 0.090 0.185 0.242 0.102 0.122 0.269 0.339

2.774 1.539 0.044 0.004 9.851 0.075 0.072 0.712 0.470 1.722 0.390 0.001

0.0958 0.2148 0.8345 0.9493 0.0017 0.7840 0.7887 0.3987 0.4931 0.1894 0.5321 0.9786

Model with Common Coefﬁcients TRT N S

90.333 0.120 90.008

0.216 0.053 0.073

2.380 5.029 0.014

0.1229 0.0249 0.9071

In the second PWP model, the follow-up time starts from the immediately preceding event or failure time. Analogous to (13.4.1), the second PWP model can be written in terms of a hazard function as h(t b , x (t)) : h (t 9 t ) exp[b x (t)] Q G Q G Q Q\

(13.4.4)

where t denotes the time of the preceding event. The time period between Q\ two consecutive recurrent events or between the last recurrent event time and the end of follow-up is called the gap time. For the lth subject, who fails at time t in stratum s, denote the gap time as QJ u :t 9t , where t is the failure time of the lth subject in the stratum QJ QJ Q\J Q\J s 9 1. Let u % u denote the ordered observed distinct gap times in Q QBQ stratum s and R (u, s) denote the set of subjects at risk in stratum s just prior to gap time u. Again, R (u, s) includes only those subjects who have experienced the ﬁrst s 9 1 strata. Then we have the partial likelihood for the second model (13.4.4): BQ L (b) : s1 i : 1

exp[b x (t )] Q QG QG l + R (u ,s) exp(b x (t )] QG Q QJ QG

(13.4.5)

  

365

Note that risk sets in (13.4.5) are deﬁned by the ordered distinct gap times in the strata rather than by the failure times themselves. Using the notations in Table 13.9, let GT denote the gap time, then GT : TR—TL. Replacing TR and TL in Tables 13.8 and 13.9 by GT, the data are ready for SAS and other software. Table 13.11 is the corresponding table for the same six patients in Table 13.9 using gap times. Using the notation of Example 13.6, the second product in (13.4.5) for stratum 2 is B exp[b x (t )] G G l + R (u ,2) exp[b x (t )] G J J G :

exp(b x ) exp(b x ) ; exp(b x ) ; exp(b x ) ; exp(b x ) exp(b x ) exp(b x ) ; ; exp(b x ) ; exp(b x ) ; exp(b x ) exp(b x )

Note that this is different from (13.4.3), due to a different deﬁnition of the risk set. The results from ﬁtting the PWP gap time model to all the data in Table 13.6 with stratum-speciﬁc coefﬁcients and common coefﬁcients are given in Table 13.12. Again, the number of initial tumors is the only signiﬁcant

Table 13.11 Rearranged Data from Table 13.9 for Fitting PWP Gap Time Model with Common Coefﬁcients ID

NR

GT

CS

TRT

N

S

3 1 3 1 1 2 6 6 1 3 1 0 3 1 5 1 6 1 1 1 1 1 1 9 0 1 1 2 4 1 12 1 0 1 1 2 1 59 0 0 1 1 ———————————————————————————— 4 2 4 1 0 1 1 5 2 6 1 1 1 1 3 2 11 0 1 2 6 6 2 12 1 0 3 1 ———————————————————————————— 5 3 1 1 1 1 1 4 3 2 0 0 1 1 6 3 31 1 0 3 1 ———————————————————————————— 6 4 5 1 0 3 1 5 4 13 0 1 1 1

366

       

Table 13.12 Asymptotic Partial Likelihood Inference on the Bladder Cancer Data from the Fitted PWP Gap Time Models with Stratum-Speciﬁc or Common Coefﬁcients 95% Conﬁdence Interval Variable

Regression Coefﬁcient

Standard Error

Chi-Square Statistic

p

Hazards Ratio

Lower

Upper

0.591 0.763 1.234 0.802 1.269 0.994 1.153 1.609 1.072 0.888 1.321 1.044

0.318 0.345 0.420 0.229 1.094 0.823 0.840 1.081 0.879 0.703 0.836 0.592

1.097 1.687 3.626 2.807 1.472 1.200 1.582 2.394 1.308 1.121 2.086 1.842

0.757 1.171 1.007

0.504 1.058 0.878

1.136 1.297 1.156

Model with Stratum-Specific Coefficients T1 T2 T3 T4 N1 N2 N3 N4 S1 S2 S3 S4

90.526 90.271 0.210 90.220 0.238 90.006 0.142 0.475 0.070 90.119 0.278 0.043

0.316 0.405 0.550 0.639 0.076 0.096 0.162 0.203 0.102 0.119 0.233 0.290

2.774 0.448 0.146 0.119 9.851 0.004 0.774 5.492 0.470 1.003 1.425 0.022

0.0958 0.5034 0.7022 0.7301 0.0017 0.9469 0.3791 0.0191 0.4931 0.3166 0.2326 0.8822

Model with Common Coefficients TRT N S

90.279 0.158 0.007

0.207 0.052 0.070

1.811 9.258 0.011

0.1784 0.0023 0.9157

covariates. There are no major differences between the two PWP models for this set of data. It is impossible to compare the coefﬁcients obtained in the two models. The ﬁrst model deﬁnes time from the beginning of the study and therefore is recommended if the entire course of recurrent events is of interest. The second model is the choice if the primary interest is to model the gap time between events. Suppose that the text ﬁle ‘‘C:EX13d4d1.DAT’’ contains the successive columns in Table 13.8 for the entire data set in Table 13.6: NR, TL, TR, CS, T1, T2, T3, T4, N1, N2, N3, N4, S1, S2, S3, and S4, and the text ﬁle ‘‘C:EX13d4d2.DAT’’ contains the seven successive columns in Table 13.9: NR, TL, TR, CS, TRT, N, and S. The following SAS code can be used to obtain the PWP models in Table 13.10. data w1; inﬁle ‘c:ex13d4d1.dat’ missover; input nr tl tr cs t1 t2 t3 t4 n1 n2 n3 n4 s1 s2 s3 s4; run; title ‘‘PWP model with stratiﬁed coefﬁcients‘; proc phreg data : w1;

  

367

model (tl, tr)*cs(0) : t1 t2 t3 t4 n1 n2 n3 n4 s1 s2 s3 s4 / ties : efron; where tl tr; strata nr; run; data w1; inﬁle ‘c:ex13d4d2.dat’ missover; input nr tl tr cs trt n s; run; title ‘‘PWP model with common coefﬁcients‘; proc phreg data : w1; model (tl, tr)*cs(0) : trt n s / ties : efron; where tltr; strata nr; run;

Suppose that the text ﬁle ‘‘C:EX13d4d3.DAT’’ contains 15 successive columns similar to Table 13.8 but with gap time GT. The 15 columns are NR, GT, CS, T1, T2, T3, T4, N1, N2, N3, N4, S1, S2, S3, and S4. The text ﬁle ‘‘C:K EX13d4d4.DAT’’ contains the successive six columns from Table 13.11: NR, GT, CS, TRT, N, and S. The following SAS, SPSS, and BMDP codes can be used to obtain the PWP gap time models in Table 13.12. SAS code: data w1; inﬁle ‘c:ex13d4d3.dat’ missover; input nr gt cs t1 t2 t3 t4 n1 n2 n3 n4 s1 s2 s3 s4; run; title ‘‘PWP gap time model with stratiﬁed coefﬁcients’’; proc phreg data : w1; model gt*cs(0) : t1 t2 t3 t4 n1 n2 n3 n4 s1 s2 s3 s4 / ties : efron; strata nr; run; data w1; inﬁle ‘c:ex13d4d4.dat’ missover; input nr gt cs trt n s; run; title ‘‘PWP gap time model with common coefﬁcients‘; proc phreg data : w1; model gt*cs(0) : trt n s / ties : efron; strata nr; run;

SPSS code: data list ﬁle : ‘c:ex13d4d3.dat’ free / nr gt cs t1 t2 t3 t4 n1 n2 n3 n4 s1 s2 s3 s4. coxreg gt with t1 t2 t3 t4 n1 n2 n3 n4 s1 s2 s3 s4 /status : cs event (1)

368

       

/strata : nr /print : all. data list ﬁle : ‘c:ex13d4d4.dat’ free / nr gt cs trt n s. coxreg gt with trt n s /status : cs event (1) /strata : nr /print : all.

BMDP 2L code: /input

/print /variable /form

/regress /input

/print /variable /form

/regress

ﬁle : ‘c:ex13d4d3.dat’ . variables : 15. format : free. cova. Survival. names : nr, gt, cs, t1, t2, t3, t4, n1, n2, n3, n4, s1, s2, s3, s4. time : gt. status : cs. response : 1. covariates : t1, t2, t3, t4, n1, n2, n3, n4, s1, s2, s3, s4. strata : nr. ﬁle : ‘c:ex13d4d4.dat’ . variables : 6. format : free. cova. Survival. names : nr, gt, cs, trt, n, s. time : gt. status : cs. response : 1. covariates : trt, n, s. strata : nr.

Anderson--Gill Model The model proposed by Andersen and Gill (1982), the AG model, assumes that all events are of the same type and are independent. The risk set in the likelihood function is totally different from that in the PWP models. The risk set of a person at the time of an event would contain all the people who are still under observation, regardless of how many events they have experienced before that time. The multiplicative hazard function h(t, x ) for the ith person is G h(t, x ) : Y (t)h (t) exp[bx (t)] G G G where Y (t), an indicator, equals 1 when the ith person is under observation (at G risk) at time t and 0 otherwise and h (t) is an unspeciﬁed underlying hazard

  

369

function. The partial likelihood for n independent persons is

L Y (t) exp(bx ) BGR G G L (b) : (13.4.6) L Y (t) exp(bx ) H H G R H where (t) : 1 if the ith person has an event at t and :0 otherwise. Details G of this likelihood function and the estimation of the coefﬁcients can be found in Fleming and Harrington (1991) and Andersen et al. (1993). Similar to the PWP models, software packages are available to carry out the computation provided that the data are arranged in a certain format. The following example illustrates the terms in (13.4.6) and the data format required by SAS. Example 13.7 We use again the data in Table 13.6 to ﬁt the AG model. To explain the terms in the likelihood function, we use the data of the six people in Table 13.7. In this model, every recurrent event is considered to be independent. Therefore, we can rearrange the data by person and by event time ‘‘within’’ an individual. Table 13.13 shows the rearranged data. For example, the person with ID : 4 had two recurrences, at 12 and 16, and the follow-up time ended at 18. The time intervals (TL, TR] are (0, 12], (12, 16], and (16,18], and 12 and 16 are uncensored observations and 18 censored, since there was no tumor recurrence at 18. For patients with ID : 1 and 2 (i : 1, 2), the respective second product terms in (13.4.6) are equal to 1 since (t) : 0, i : 1, G 2, for all t. For patient 3 (i : 3), (t) : 1 only at t : 3 (the ﬁrst tumor G recurrence time of the patient). Thus, the respective second product has only

Table 13.13 Rearranged Data from Table 13.7 for Fitting AG Model ID

TL

TR

CS

TRT

N

S

1 2 3 3 4 4 4 5 5 5 5 6 6 6 6 6

0 0 0 3 0 12 16 0 6 12 13 0 3 15 46 51

9 59 3 14 12 16 18 6 12 13 26 3 15 46 51 53

0 0 1 0 1 1 0 1 1 1 0 1 1 1 1 0

1 0 1 1 0 0 0 1 1 1 1 0 0 0 0 0

1 1 2 2 1 1 1 1 1 1 1 3 3 3 3 3

2 1 6 6 1 1 1 1 1 1 1 1 1 1 1 1

370

       

Table 13.14 Asymptotic Partial Likelihood Inference on the Bladder Cancer Data from the Fitted AG Model 95% Conﬁdence Interval Variable TRT N S

Regression Coefﬁcient

Standard Error

Chi-Square Statistic

p

Hazards Ratio

Lower

Upper

90.412 0.164 90.041

0.200 0.048 0.070

4.241 11.741 0.342

0.0395 0.0006 0.5590

0.663 1.178 0.960

0.448 1.073 0.836

0.980 1.293 1.102

one term at t : 3 and the denominator of this term sums over all the patients who are under observation and at risk at time t : 3. From Figure 13.1 it is easily seen that the sum is over all six patients; that is, the respective second product is exp(bx ) exp(bx ) H H

(13.4.7)

For patient 4 (i : 4), the second product in (13.4.6) contains two terms. One is for t : 12 (the ﬁrst recurrence time), and at t : 12, patients 2, 3, 4, 5, and 6 are still under observation, and therefore the denominator of the term sums over patients 2 to 6. The other term is for t : 16 (the second recurrence time) and the denominator sums over patients 2, 4, 5, and 6. Patient 3 is no longer under observation after t : 14. Thus, the second product term for i : 4 is exp(bx ) exp(bx ) ; exp(bx ) exp(bx ) ; exp(bx ) H H H H

(13.4.8)

Similarly, we can construct each term in (13.4.6) and the partial likelihood function. Using SAS, we obtain the results in Table 13.14. The AG model identiﬁes treatment and number of initial tumor as signiﬁcant covariates. Compared with placebo, thiotepa does slow down tumor recurrence. Readers can construct the SAS codes for the AG model by using Table 13.13 and by following the codes given in Example 13.6. Wei et al. Model By using a marginal approach, Wei, Lin, and Weissfeld (1989) proposed a model, the WLW model, for the analysis of recurrent failures. The failures may be recurrences of the same kind of event or events of different natures, depending on how the stratiﬁcation is deﬁned. If the strata are deﬁned by the

  

371

times of repeated failures of the same type, similar to the strata deﬁned in the PWP models, it can be used to analyze repeated failures of the same kind. The difference between the PWP models and the WLW model is that the latter considers each event as a separate process and treats each stratum-speciﬁc (marginal) partial likelihood separately. In the stratum-speciﬁc (marginal) partial likelihood of stratum s, people who have experienced the (s 9 1)th failure contribute either one uncensored or one censored failure time depending on whether or not they experience a recurrence in stratum s, and the other subjects contribute only censored times (forced as censored times). Therefore, each stratum contains everyone in the study. This is different from the PWP models, in which subjects who have not experienced the (s 9 1)th failure are not included in stratum s. If the strata are deﬁned by the type of failure, the WLW model acts like the competing risks model deﬁned in Section 13.3, and the type-speciﬁc (marginal) partial likelihood for the jth type simply treats all failures of types other than j in the data as censored. For the kth stratum of the ith person, the hazard function is assumed to have the form h (t) : Y (t)h (t) exp(b x ), t0 (13.4.9) I IG IG IG I where Y (t) : 1, if the ith person in the kth stratum is under observation, 0, IG otherwise, h (t) is an unspeciﬁed underlying hazard function. Let R (t ) I I IG denote the risk set with people at risk at the ith distinct uncensored time t in IG the kth stratum. Then the speciﬁc partial likelihood for the kth stratum is

L exp(b x ) BG I IG L (b ) : (13.4.10) I I l + R (t ) exp(b x ) I IG I IJ G where : 1 if the ith observation in the kth stratum is uncensored and 0 G otherwise. The coefﬁcients b are stratum speciﬁc. In practice, if we are I interested in the overall effect of the covariates, we can assume that the coefﬁcients from different strata are equal (provided that there are no qualitative differences among the strata), combine the strata and draw conclusions above the ‘‘average effect’’ of the covariates. We again called the coefﬁcients of these covariates common coefﬁcients. The event time is from the beginning of the study in this model. Similar to the PWP and AG models, the data must be arranged in a certain format in order to use available software to carry out estimation of the coefﬁcients and tests of signiﬁcance of the covariates. Using the same data as in Examples 13.6 and 13.7, the following example illustrates the terms in the stratum-speciﬁc likelihood function and the use of software. Example 13.8 First, we use the same six patients to illustrate the components in the stratum-speciﬁc likelihood function in (13.4.10). The format the data have to be in for the available software, such as SAS, SPSS, and BMDP,

372

       

Table 13.15 Rearranged Data from Table 13.7 for Fitting WLW Model with NR-Indexed Coefﬁcients ID

NR TR

CS

T1

T2

T3

T4

N1

N2

N3

N4

S1

S2

S3

S4

3 1 3 1 1 0 0 0 2 0 0 0 6 0 0 0 6 1 3 1 0 0 0 0 3 0 0 0 1 0 0 0 5 1 6 1 1 0 0 0 1 0 0 0 1 0 0 0 1 1 9 0 1 0 0 0 1 0 0 0 2 0 0 0 4 1 12 1 0 0 0 0 1 0 0 0 1 0 0 0 2 1 59 0 0 0 0 0 1 0 0 0 1 0 0 0 ———————————————————————————————————————————— 1 2 9 0 0 1 0 0 0 1 0 0 0 2 0 0 5 2 12 1 0 1 0 0 0 1 0 0 0 1 0 0 3 2 14 0 0 1 0 0 0 2 0 0 0 6 0 0 6 2 15 1 0 0 0 0 0 3 0 0 0 1 0 0 4 2 16 1 0 0 0 0 0 1 0 0 0 1 0 0 2 2 59 0 0 0 0 0 0 1 0 0 0 1 0 0 ———————————————————————————————————————————— 1 3 9 0 0 0 1 0 0 0 1 0 0 0 2 0 5 3 13 1 0 0 1 0 0 0 1 0 0 0 1 0 3 3 14 0 0 0 1 0 0 0 2 0 0 0 6 0 4 3 18 0 0 0 0 0 0 0 1 0 0 0 1 0 6 3 46 1 0 0 0 0 0 0 3 0 0 0 1 0 2 3 59 0 0 0 0 0 0 0 1 0 0 0 1 0 ———————————————————————————————————————————— 1 4 9 0 0 0 0 1 0 0 0 1 0 0 0 2 3 4 14 0 0 0 0 1 0 0 0 2 0 0 0 6 4 4 18 0 0 0 0 0 0 0 0 1 0 0 0 1 5 4 26 0 0 0 0 1 0 0 0 1 0 0 0 1 6 4 51 1 0 0 0 0 0 0 0 3 0 0 0 1 2 4 59 0 0 0 0 0 0 0 0 1 0 0 0 1

is similar to that in the PWP and AG models except that all six people are in each of the four strata (Table 13.15). The ﬁrst stratum (NR : 1) is exactly the same as in Table 13.8. The six patients are ordered according to the magnitude of the event time (censored or not, TR). In stratum 2(NR : 2), the three people (with ID : 4, 5, and 6) whose times to the second tumor recurrence are uncensored observations. Patients 1 and 2 had censored time at 9 and 59, respectively. Patient 3, who had no second recurrence and was observed until 14 months, is considered censored at 14. The other strata are constructed in a similar manner. Using the data arrangement in Table 13.15, we can see that for the second stratum, the likelihood function in (13.4.10) has three terms, one for each of persons 5, 6, and 4, whose : 1 (CS : 1 in the table). For patient 4, G the risk set at time t : 16 has two individuals (ID : 4 and 2); for patient 5, the risk set at time t : 12 contains ﬁve individuals (ID : 2, 3, 4, 5, and 6); and for patient 6, the risk set at time t : 15 has three individuals (ID : 2, 4, and 6). Let x be the covariate vector of the patient with ID : j in stratum 2; then H

  

373

Table 13.16 Rearranged Data from Table 13.7 for Fitting WLW Model with Common Coefﬁcients ID

NR

TR

CS

TRT

N

S

3 1 3 1 1 2 6 6 1 3 1 0 3 1 5 1 6 1 1 1 1 1 1 9 0 1 1 2 4 1 12 1 0 1 1 2 1 59 0 0 1 1 ———————————————————————————— 1 2 9 0 1 1 2 5 2 12 1 1 1 1 3 2 14 0 1 2 6 6 2 15 1 0 3 1 4 2 16 1 0 1 1 2 2 59 0 0 1 1 ———————————————————————————— 1 3 9 0 1 1 2 5 3 13 1 1 1 1 3 3 14 0 1 2 6 4 3 18 0 0 1 1 6 3 46 1 0 3 1 2 3 59 0 0 1 1 ———————————————————————————— 1 4 9 0 1 1 2 3 4 14 0 1 2 6 4 4 18 0 0 1 1 5 4 26 0 1 1 1 6 4 51 1 0 3 1 2 4 59 0 0 1 1

the likelihood function in (13.4.10) is

exp(b x ) BG exp(b x ) G L (b ) : : l + R (t ) exp(b x ) exp(b x ) ; exp(b x ) G G J exp(b x ) ; exp(b x ) ; exp(b x ) ; exp(b x ) ; exp(b x ) ; exp(b x ) exp(b x ) ; (13.4.11) exp(b x ) ; exp(b x ) ; exp(b x ) Note that (13.4.11) is different from (13.4.3). The likelihood function for the other strata and for the entire data set in Table 13.6 can be constructed in a similar manner. If we ignore the stratum-speciﬁc effect and are interested only in the average overall effect of the covariates, we combine T1—T4, N1—N4, and S1—S4. The rearranged data for the six patients are given in Table 13.16.

374

       

Table 13.17 Asymptotic Partial Likelihood Inference on the Bladder Cancer Data from the Fitted WLW Models with Stratum-Speciﬁc or Common Coefﬁcients 95% Conﬁdence Interval Variable

Regression Coefﬁcient

Standard Error

Chi-Square Statistic

p

Hazards Ratio

Lower

Upper

0.591 0.531 0.496 0.530 1.269 1.147 1.189 1.394 1.072 0.925 0.807 0.813

0.318 0.246 0.202 0.171 1.094 0.958 0.969 1.092 0.879 0.712 0.565 0.517

1.097 1.148 1.225 1.639 1.472 1.373 1.460 1.780 1.308 1.203 1.155 1.279

0.557 1.234 0.950

0.376 1.126 0.828

0.826 1.352 1.089

Model with Stratum-Specific Coefficients T1 T2 T3 T4 N1 N2 N3 N4 S1 S2 S3 S4

90.526 90.632 90.698 90.635 0.238 0.137 0.174 0.332 0.070 90.078 90.214 90.206

0.316 0.393 0.460 0.576 0.076 0.902 0.105 0.125 0.102 0.134 0.183 0.231

2.774 2.588 2.308 1.215 9.851 2.229 2.750 7.112 0.470 0.337 1.371 0.800

0.0958 0.1077 0.1278 0.2703 0.0017 0.1354 0.0973 0.0077 0.4931 0.5614 0.2416 0.3712

Model with Common Coefficients TRT N S

90.585 0.210 90.052

0.201 0.047 0.070

8.460 20.230 0.548

0.0036 0.0001 0.4592

The results from ﬁtting the WLW models to the entire data set in Table 13.6 are given in Table 13.17. The model with stratum-speciﬁc coefﬁcients suggests that more initial tumors accelerate tumor recurrence and the acceleration is particularly faster for the ﬁrst recurrence and the third and fourth recurrences. The signs of the coefﬁcients for T1—T4 suggest that thiotepa may slow down tumor growth, but the evidence is not statistically signiﬁcant. The model with common coefﬁcients suggests that thiotepa is signiﬁcantly more effective in prolonging the recurrence time. The results suggest that when looking at each stratum independently, there is no strong evidence that thiotepa is more effective than placebo. However, the combined estimate of the common coefﬁcient provides stronger evidence that thiotepa is more effective over the course of the study.

13.5 MODELS FOR RELATED OBSERVATIONS In Cox’s proportional hazards model and other regression methods, a key assumption is that observed survival or event times are independent. However, in many practical situations, failure times are observed from related individuals

   

375

or from successive recurrent events or failures of the same person. For example, in an epidemiological study of heart disease, some of the participants may be from the same family and therefore are not independent. These families with multiple participants may be called clusters. In this case, the regression methods we introduced earlier may not be appropriate. Several types of models introduced especially for related observations are discussed by Andersen et al. (1993), Liang et al. (1995), Klein and Moeschberger (1997), and Ibrahim et al. (2001). Details about these models are beyond the scope of this book. In the following, we introduce brieﬂy the frailty models. The frailty models assume that there is an unmeasured random variable (frailty) in the hazard function. This random variable accounts for the variation or heterogeneity among individuals in a cluster. It is also assumed that the frailty is independent of censoring. Let n be the total number of participants in the study, some of them related and forming clusters. Let v be the unknown G random variable, frailty, associated with the ith cluster, 1 i n. The frailty model associated with the proportional hazards model can be written in terms of the log hazard function as log[h (t; x v )] : log[h (t)] ; v ; bx GH GH G G GH

(13.5.1)

for 1 j m and 1 i n, where b denotes the p;1 column vector of G unknown regression coefﬁcients, x is the covariate vector of the jth person in GH the ith cluster, m is the number of individuals in the ith cluster, and h (t) is an G unknown underlying hazard function. Compared with the Cox proportional hazards model, the difference here is the random effect v . Because v remains G G the same in the ith cluster, the association between failure and covariates within each cluster in this model is assumed to have a symmetric pattern. In a family study, this model can be used, for example, to model failure times observed from siblings by treating each family as a cluster. This model was proposed by Vaupel et al. (1979) and developed and discussed by many researchers, including Clayton and Cuzick (1985). The main approach to this model is to assume that v follows a parametric distribution. G The frailty model in (13.5.1) can be extended to handle more complicated situations. For example, the frailty can be a time-dependent variable [replace v by v (t) in (13.5.1)]. The frailty model with v (t) can be used to model G G G successive or recurrent failure time as an alternative to the models in Section 13.4. Another example is that there may be more than one type of frailty in each cluster, and v in (13.5.1) can be replaced by v ; u or v ; u ; w , and G G G G G G so on. Inferences of these frailty models are also based on either a likelihood function or a partial likelihood function. Since the models involve a parametric distribution, the likelihood or partial likelihood functions are complicated and are beyond the level of this book. The frailty models have not been used widely primarily because of the lack of commercially available software. There are some computer programs

376

       

available; for example, a SAS macro is available for a gamma frailty model at the Web site of Klein and Moeschberger (1997), and another program is described by Jenkins (1997). Bibliographical Remarks Most of the major references for nonproportional hazards models have been cited in the text of this chapter. Applications of these models include: stratiﬁed models: Vasan et al. (1997), Aaronson et al. (1997), and Yakovlev et al. (1999); frailty models: Yashin and Iachine (1997), Kessing et al. (1999), Siegmund et al. (1999), Albert (2000), Lee and Yau (2001), Wienke el al. (2001), and Xue (2001); competing risks models: Mackenbach et al. (1995), Fish et al. (1998), Albertsen et al. (1998), Blackstone and Lytle (2000), Yan et al. (2000), and Tai et al. (2001). EXERCISES 13.1 Consider the cancer-free times from the participants with IDs 15 to 23 in Table 13.1. Follow Example 13.1 to construct the partial likelihood function based on the observed cancer-free times from these nine participants. 13.2 Consider the survival times from 30 resected melanoma patients in Table 3.1. Let AGEG denote age group, AGEG : 1 if age 45 and AGEG : 2 otherwise. Fit the survival times with an AGEG-stratiﬁed Cox proportional hazards model with the covariates age, gender, initial stage, and treatment received. Discuss the association of the treatment received with the survival time. 13.3 Using the data in Table 12.4, following Example 13.5 and the sample codes for SAS, SPSS, or BMDP, ﬁt the competing risk model for stroke, CHD, other CVD, or STROKE/CHD separately, and discuss the results obtained. 13.4 Using the rearranged data in Tables 13.7 to 13.13 and following Examples 13.6 to 13.8, complete construction of the remaining terms in the partial likelihood function based on the PWP model (13.4.2), PWP gap time model (13.4.3), and AG model (13.4.9), and the remaining three marginal likelihood functions based on the WLW model (13.4.13).

Statistical Methods for Survival Data Analysis. Elisa T. Lee and John Wenyu Wang Copyright ¶ 2003 John Wiley & Sons, Inc. ISBN: 0-471-36999-7

C H A P T E R 14

Identiﬁcation of Risk Factors Related to Dichotomous and Polychotomous Outcomes

In biomedical research we are often interested in whether a certain survivalrelated event will occur and the important factors that inﬂuence its occurrence. Such events may involve two or more possible outcomes; examples are the development of a given condition and response to a given treatment. If the given condition is diabetes and we are only interested in whether someone develops the disease (yes or no), the outcome is binary or dichotomous. If we are interested in whether the person develops impaired glucose tolerance, diabetes, or remains having normal glucose tolerance, there are three possible outcomes, or we say the outcome is trichotomous. Similarly, response to a given treatment can have dichotomous (response or no response) or polychotomous outcomes (complete response, partial response, or no response). To determine whether one is likely to develop a given disease, we need to know the important characteristics (or factors) related to its development. High- and low-risk groups can then be deﬁned accordingly. Factors closely related to the development of a given disease are usually called risk factors or risk variables by epidemiologists. We shall use these terms in a broader sense to mean factors closely related to the occurrence of any event of interest. For example, to ﬁnd out whether a woman will develop breast cancer because one of her relatives did, we need to know whether a family history of breast cancer is an important risk factor. Therefore, we need to know the following: 1. Of age, race, family history of breast cancer, number of pregnancies, experience of breast-feeding, and use of oral contraceptives — which are most important? 2. Can we predict, on the basis of the important risk factors, whether a woman will develop breast cancer or is more likely to develop breast cancer than another person? 377

378         In this chapter we introduce several methods for answering these questions. The general approach is to relate various patient characteristics (or independent variables, or covariates) to the occurrence of an event (dependent or response variable) on the basis of data collected from patients in each of the outcome groups. In the case of dichotomous outcomes, there are two outcome groups. For example, to relate variables such as age, race, and number of pregnancies to the development of breast cancer, we need to collect information about these variables from a group of breast cancer patients as well as from a group of healthy normal women. For an event with polychotomous outcomes, we need to collect data from each outcome group. Often, a large number of patient characteristics deserve consideration. These characteristics may be demographic variables such as age; genetic variables such as gene variant or phenotype; behavioral variables such as smoking or drinking behavior and use of estrogen or progesterone medication; environmental variables such as exposure to sun, air pollution, or occupational dust; or clinical variables such as blood cell counts, weight, and blood pressure. The number of possible risk factors can be reduced through medical knowledge of the disease and careful examination of the possible risk factors individually. In Section 14.1 we present two methods for examination of individual variables. One is to compare the distribution of each possible risk variable among the outcome groups. The other method is the chi-square test for a contingency table. This test is particularly useful when the risk variables are categorical: for example, dichotomous or trichotomous. In this case, a 2;c or r;c contingency table can be set up and a chi-square test performed. In Section 14.2 we discuss logistic, conditional logistic, and other regression models for binary responses and for examining the possible risk variables simultaneously. Models for multiple outcomes are discussed in Section 14.3.

14.1 UNIVARIATE ANALYSIS 14.1.1 Comparing the Distributions of Risk Variables Among Groups When the outcome is binary, it is often convenient to call an observation a success or a failure. Success may mean that a survival-related event occurred, and failure that it failed to occur. Thus, a success may be a responding patient, a patient who survives more than ﬁve years after surgery, or a person who develops a given disease. A failure may be a nonresponding patient, a patient who dies within ﬁve years after surgery, or a person who does not develop a given disease. A preliminary examination of the data can compare the distribution of the risk variables in the success and failure groups. This method is especially appropriate if the risk variable is

 

379

Table 14.1 Ages of 71 Leukemia Patients (Years) Responders Nonresponders

20, 25, 26, 26, 27, 28, 28, 31, 33, 33, 36, 40, 40, 45, 45, 50, 50, 53 56, 62, 71, 74, 75, 77, 18, 19, 22, 26, 27, 28, 28, 28, 34, 37, 47, 56, 19 27, 33, 34, 37, 43, 45, 45, 47, 48, 51, 52, 53, 57, 59, 59, 60, 60, 61, 61, 61, 63, 65, 71, 73, 73, 74, 80, 21, 28, 36, 55, 59, 62, 83

Source: Hart et al. (1977). Data used by permission of the author.

continuous. If, for example, the risk factor x is weight and the dependent variable y is having cardiovascular disease, we may compare the weight distribution of patients who have developed disease to that of disease-free patients. If the disease group has signiﬁcantly higher weights than those of the disease-free group, we may consider weight an important risk factor. Commonly used statistical methods for comparing two distributions are the t-test for two independent samples if the assumption of normality holds and the Mann—Whitney U-test if the normality assumption is violated and a nonparametric test is preferred. Similarly, if there are more than two possible outcomes, we can use analysis of variance or the Kruskal—Wallis nonparametric test to compare the multiple distributions of a continuous variable. The following example compares the age distribution of responders with that of nonresponders in a cancer clinical trial. Example 14.1 Consider the ages of 71 leukemia patients — 37 responders and 34 nonresponders (response is deﬁned as a complete response only) — given in Table 14.1. Figure 14.1 gives us the estimated age distributions of the two groups. By using the Mann—Whitney U-test (or Gehan’s generalized Wilcoxon test), we ﬁnd that the difference in age between responders and nonresponders is statistically signiﬁcant (p 0.01). In consequence, a question may arise as to what age is critical. Can we say that patients under 50 may have a better chance of responding than do patients over 50? To answer this question, one can dichotomize the age data and use the chi-square test, discussed next. 14.1.2 Chi-Square Test and Odds Ratio The chi-square test and the odds ratio are most appropriate when the independent variable is categorical. If the independent variable is dichotomous, a 2;2 table can be used to represent the data. Any variables that are not dichotomous can be made so (with a loss of some information) by choosing a cutoff point: for example, age less than 50 years. For multipleoutcome events, 2;c or r;c tables can be constructed. The independent

380        

Figure 14.1 Age distribution of responders and nonresponders.

variables are then examined to ﬁnd which ones (in some sense) provide the best risk associations with the dependent variable. We ﬁrst consider binary outcomes and independent variables that have two categories; that is, we set up a 2;2 contingency table similar to Table 14.2 for each independent variable and look for a high degree of proportionality. The ﬁrst step is to calculate the sample proportion of successes in the two risk groups, a/C and b/C . Further analysis of the table is concerned with the precision of these proportions. A standard chi-square test can be used.

 

381

Table 14.2 General Setup of a 2;2 Contingency Table Risk Factor

Dependent variable Success Failure Total Proportion of successes (success rate)

Present (E )

Absent (E )

Total

a c C a/C

b d C b/C

R R N

If the rates of success for the two groups E and E are exactly equal, the expected number of patients in the ijth cell (ith row and jth column) is R C R ;C H E : N; G; H : G GH N N N

(14.1.1)

For example, in the top left cell, the expected number is R ;C E : N since the overall success rate is R /N and there are C individuals in the E group. Similar expected numbers can be obtained for each of the four cells. Let O be the number of patients observed in the ijth cell. Then the discrepancies GH can be measured by the differences (O 9 E ). In a rough sense, the greater the GH GH discrepancies, the more evidence we have against the null hypothesis that the success rates are the same for the two groups. The chi-square test is based on these discrepancies. Let (O 9 E ) GH GH X : E G H GH

(14.1.2)

Under the null hypothesis, X follows the chi-square distribution with 1 degree of freedom (df). The hypothesis of equal success rates for groups E and E is rejected if X , where is the 100 percentage point of the chi-square ? ? distribution with 1 degree of freedom. An alternative way to compute X is X :

(ad 9 bc)N R R C C

(14.1.3)

382         The odds ratio (Cornﬁeld, 1951) is a commonly used measure of association in 2;2 tables. The odds ratio (OR) is the ratio of two odds: the odds of success when the risk factor is present and the odds of success when the risk factor is absent. In terms of probabilities, OR :

P(success E)/P(failure E) P(success E )/P(failure E )

(14.1.4)

Using the notation in Table 14.2, P(success E) and P(failure E) may be estimated by a/C and c/C , respectively. Similarly, P(success E ) and P(failure E ) may be estimated, respectively, by b/C and d/C . Therefore, the numerator and denominator of (14.1.4) may be estimated, respectively, by a a/C : c c/C and b/C b : d/C d Consequently, the OR may be estimated by a/c ad : b/d bc

: OR

(14.1.5)

which is also referred to as the cross-product ratio. Several methods are available for an interval estimate of OR: for example, Cornﬁeld (1956) and Woolf (1955). Cornﬁeld’s method, which requires an iterative procedure, is considered more accurate but more complicated than Woolf’s method. Woolf suggests using the logarithm of OR. The standard error may be estimated by of log OR (log OR ): SE

1 1 1 1 ; ; ; a b c d

(14.1.6)

Then a 100(1 9 )% conﬁdence interval (CI) for log OR is
?

(log OR ) SE

The conﬁdence interval for OR can be obtained by taking the antilog of the conﬁdence limits for log OR. If log OR and log OR are the upper and lower 3 *

 

383

conﬁdence limits for log OR, elogOR3 and elogOR* are the upper and lower conﬁdence limits for OR. is undeﬁned. If any one of the Notice that in (14.1.5), if b or c is zero, OR four cell frequencies is zero, the estimated standard error in (14.1.6) is also undeﬁned. Should this occur, some statisticians (Haldane, 1956; Fleiss, 1979, 1981) suggest that 0.5 be added to each cell before using (14.1.5) and (14.1.6) to solve the computational problem. However, if the cell frequencies are as small as zero, the addition of 0.5 to each cell will substantially affect the resulting estimate of OR and its standard error (Mantel, 1977; Miettinen, 1979). The estimates so obtained must be interpreted with caution. An odds ratio of 1 indicates that the odds of success are the same whether or not the risk factor is present. An odds ratio greater than 1 means that the odds in favor of success is higher when the risk factor is present, and therefore there is a positive association between the risk factor and success. Similarly, an odds ratio of less than 1 signiﬁes a negative association between the risk factor and success. The interpretation should not be based totally on the point estimate. A conﬁdence interval is always more meaningful, just as in any other estimation procedure. The chi-square statistic in (14.1.2) may be used to test the null hypothesis that there is no association between the risk factor and success, or H : OR : 1. The following example illustrates the chi-square test and odds ratio. Example 14.2 In the study of the response rate of 71 leukemia patients (Example 14.1), age is considered one of the possible risk variables. The following 2;2 table is constructed.

Response Nonresponse Total

Age 50

Age 50

Total

27 12 39

10 22 32

37 34 71

The question is whether the response rates in the two age groups differ signiﬁcantly or whether age is associated with response. The X value according to (14.1.3) is X :

(594 9 120)(71) : 10.16 (37)(34)(39)(32)

with 1 degree of freedom. Reference to Table B-2 shows that the probability of

384         getting a X value of 10.16 if the two response rates are equal in the population is less than 0.01. Hence the difference between the two response rates is signiﬁcant at the 1% level. The estimate odds ratio, according to (14.1.5), is

OR :

(27)(22) : 4.95 (10)(12)

The data show that the odds in favor of response are almost ﬁve times higher in patients under 50 years of age than in patients at least 50 years old. The difference is signiﬁcantly different, as indicated by the chi-square test above. : 1.60. To obtain a conﬁdence interval for OR, we ﬁrst compute log OR following (14.1.6) is The estimated standard error of log OR (log OR ): SE

1 1 1 1 ; ; ; : 0.515 27 10 12 22

A 95% conﬁdence interval for log OR is 1.60 < 1.96(0.515), or (0.59, 2.61), and a 95% conﬁdence interval for OR is (e , e ), or (1.80, 13.60). The wide interval may be due to the small cell frequencies. Note that the standard error is inversely related to the cell frequencies. of log OR In this example, the cutoff point, 50, was chosen arbitrarily. It is often of interest to try more than one cutoff point if the number of observations in each cell is not too small. There are cases where the independent variable has c 2 classes. The chi-square test can be extended to 2;c tables. The odds ratio method can also be extended to handle polychotomous independent variables. It is done by selecting one of the classes as the reference class (the E group) and calculating the measure of association of each of the other classes relative to the reference class. For multiple-outcome events, the chi-square test can be extended to r;c tables. The expected frequencies are computed just as in (14.1.1), and computation of X [chi-square distributed with (r 9 1)(c 9 1) degrees of freedom] is the same as in (14.1.2) except that the sum is over all r;c cells. For details, see Snedecor and Cocharan (1967, Sec. 9.7). The following example illustrates the procedures. Example 14.3 Suppose that in the study of response rates of leukemia patients, another possible risk variable is the marrow absolute leukemic inﬁltrate, which is deﬁned as the percentage of the total marrow that is either blast cells or promyelocytes. It is believed that patients should be classiﬁed into three classes: 45%, 46—90%, and 90%. The 2;3 table is given below. Numbers in parentheses are expected frequencies. For example, 18.68 : (39)(34)/71.

     

385

Marrow Absolute Inﬁltrate

Response Nonresponse Total Response rate, (%) OR 95% CI for OR

45%

46—90%

90%

Total

4 (8.34) 12 (7.66) 16 25 1

20 (20.32) 19 (18.68) 39 51 3.16 (0.86, 11.52)

13 (8.34) 3 (7.66) 16 81 13.0 (2.40, 70.46)

37 34 71

The question is whether the difference in marrow absolute leukemic inﬁltrate is related to response. The value of X is X :

(4 9 8.34) (12 9 7.66) (3 9 7.66) ; ;%; : 10.17 8.34 7.66 7.66

The number of degrees of freedom is 3 9 1 : 2. With X : 10.17 and 2 degrees of freedom, the probability that the three absolute inﬁltrate groups have the same response rate is less than 0.01. The data suggest that patients with a high percentage of marrow absolute inﬁltrate tend to have a high response rate. Marrow absolute inﬁltrate may be an important factor in predicting response. s given in the table above are calculated using the 45% class as The OR the reference class (or group). For example, for the 90% class, the odds ratio is 13;12/4;3 : 13. The 95% conﬁdence intervals for the ORs are obtained using (14.1.6). Although the odds ratio for the 46—90% group is larger than 1, the 95% conﬁdence intervals covers 1. Therefore, the point estimate, 3.16, cannot be taken too seriously. It appears that the major difference is between the 90% and 45% groups. Individual examination of each independent variable can provide only a preliminary idea of how important each variable is by itself. The relative importance of all the variables has to be examined simultaneously using multivariate methods. In the following section we discuss the linear logistic regression analysis.

14.2 LOGISTIC AND CONDITIONAL LOGISTIC REGRESSION MODELS FOR DICHOTOMOUS RESPONSES 14.2.1 Logistic Regression Model for Prospective Studies In a typical prospective study, a random sample of subjects is taken and the values of the independent variables are measured at a given time (usually called baseline measurements). The subjects are then followed for a given period of

386         time and the outcome (dependent) variable is measured at the end of the follow-up. Therefore, for a prospective study, the independent variables are regarded as ﬁxed quantities during the follow-up, but the outcomes are random and unknown. The purpose of a prospective study is to examine the outcomes and relate them to the baseline measurements. Examples of prospective studies are cohort epidemiologic studies and clinical trials. Suppose that there are n subjects and to some of whom the event of interest occurred. They are called successes; the others are failures. Let y : 1 if the ith G subject is a success and y : 0 if the ith subject is a failure. Suppose that for G each of the n subjects, p independent variables x , x , . . . , x are measured. G G GN These variables can be either qualitative, such as gender and race, or quantitative, such as blood pressure and white blood cell count. The problem is to relate the independent variables, x , . . . , x , to the dichotomous dependent G GN variable y . G Let P be the probability of success, P : P( y : 1 x , . . . , x ), for the ith G G G G GN subject. The logistic regression model, proposed by Cox (1970) assumes that the dependence of the probability of success on independent variables is exp(N b x ) H H GH P : P( y : 1 x ) : G G G 1 ; exp(N b x ) H H GH

(14.2.1)

1 1 9 P : P( y : 0 x ) : G G G 1 ; exp(N b x ) H H GH

(14.2.2)

and

where x : (x % x ), x Y 1, and b are unknown coefﬁcients. The logarithm G G GN G H of the ratio of P and 1 9 P is a simple linear function of the x ’s. G G GH Let N P G : bx : log G H GH 19P G H

(14.2.3)

: log[P /(1 9 P )] is called the logistic transform of P and (14.2.3) is a linear G G G G logistic model. Another name for is log odds. Thus, the model relates the G independent variables to the logistic transform of P , or log odds. The G probability of success P can then be found from (14.2.3) or (14.2.1). In many G ways (14.2.3) is the most useful analog for dichotomous response data of the ordinary regression model for normally distributed data. To estimate the coefﬁcients b ’s, Cox suggests the maximum likelihood H method. Let y , y , . . . , y be observations with dichotomous values on n L subjects. The likelihood function based on the binomial distribution contains a factor (14.2.1) whenever y : 1 and (14.2.2) whenever y : 0. Thus, the likeliG G

     

387

hood function is L L (b , b , . . . , b ) : PWG (1 9 P )\WG G N G G L exp(y N b x ) exp(N b t ) G H H H G H H GH : : L [1 ; exp(N b x )] L [1 ; exp(N b x )] G H H GH G H H GH (14.2.4) where t : L x y . The log-likelihood function is G GH G H

N L N l(b , b , . . . , b ) : log L : b t 9 log 1 ; exp b x N H H H GH H G H

(14.2.5)

The maximum likelihood estimates of b ’s that maximize the log-likelihood H function in (14.2.5) can be obtained by solving the following p equations simultaneously: L x exp(N b x ) H H GH : 0 t 9 GH H 1 ; exp(N b x ) H H GH G

j : 0, 1, . . . , p

(14.2.6)

This can be done by an iterative procedure such as the Newton—Raphson procedure. The second derivative of l in (14.2.5) is

l L I* : :9 HH b b G H H j : 0, . . . , p;

x x exp(N b x ) GH GH H H GH 1 ; exp(N b x ) H H GH j : 0, . . . , p

(14.2.7)

Let I : (91)I * . Then the estimated inverse of the I matrix, I \, is the HH HH asymptotic covariance matrix of the b ’s. If we use the notation in Section 7.1 H and let b : (b , b , . . . , b ) denote the MLE of b, the estimated covariance N matrix of the MLE b is V (b ) : (v ) : (9 l (b )/ b b)\ : I \, where v GH GH denotes the ijth element of V (b ) or the ijth element of I \. The coefﬁcients so obtained indicate the relationships between the variables and the log odds in favor of success. For a continuous variable, the corresponding coefﬁcient gives the change in the log odds for an increase of 1 unit in the variable. For a categorical variable, the coefﬁcient is equal to the log odds ratio (see Section 14.1). An approximate 100(1 9 )% conﬁdence interval for b is H b < Z (v H ? HH

(14.2.8)

where Z is the 100(1 9 /2) percentile of the standard normal distribution. ?

388         To test the hypothesis that some of the b ’s are zero, a likelihood ratio test H can be used. For example, to test H : b : 0, the log-likelihood ratio test H statistic is X : 92[l(b , b , . . . , b , 0, b , . . . , b ) 9 l(b , b , b , . . . , b )] * H\ H> N N (14.2.9) where the ﬁrst term is the maximized log-likelihood subject to the constraint b : 0. If the hypothesis is true, X is distributed asymptotically as chi-square H * with 1 degree of freedom. An alternative test for the signiﬁcance of the coefﬁcients is the Wald test, which can be written as b X : H 5 v HH

(14.2.10)

Under the null hypothesis that b : 0, X has an asymptotic chi-square H 5 distribution with 1 degree of freedom. Although the Wald test is used by many, it is less powerful than the likelihood ratio test (Hauck and Donner, 1977; Jennings, 1986). In other words, the Wald test often leads the user to conclude that the coefﬁcient (consequently, the respective risk factor) is not signiﬁcant when, in fact, it is signiﬁcant. Similar to earlier discussion of model selection, forward, backward, and stepwise variable selection methods can be used to select the risk factors that are signiﬁcantly associated with a dichotomous response. The independent variables x in this model do not have to be the original variables. They can GH be any meaningful transforms of the original variables: for example, the logarithm of the original variable, log x , and the deviation of the variable GH from its mean, x 9 x . GH H From (14.2.1) and (14.2.2), the logarithm of the odds ratio for ith and kth subjects is log

N P /(1 9 P ) G G : b (x 9 x ) H GH IH P /(1 9 P ) I I H

(14.2.11)

Thus, an estimate of the odds ratio can be obtained by replacing b in (14.2.11) H with its MLE, b . H From the estimated regression equation, a predicted probability of success can be computed by substituting the values of the risk factors in the equation. Using these predicted probabilities, a goodness-of-ﬁt test can be performed to test the hypothesis that the model ﬁts the data adequately. Several such tests are available (Lemeshow and Hosmer, 2000): for example, the Pearson chisquare test, the Hosmer—Lemeshow (Hosmer and Lemeshow, 1980) test, a test statistic suggested by Tsiatis (1980), and the score of Brown (1982). In the following, we introduce the Hosmer—L emeshow test.

     

389

Let p be the estimate of P obtained from the ﬁtted logistic regression G G equation for the ith subject, i : 1, . . . , n. The p ’s can be arranged in ascending G order from smallest to largest. Those probabilities and the corresponding subjects are then divided into g groups according to some cutoff points of the probability. For example, let g : 10 and the cutoff points of the probability be equal to k/10, k : 1, 2, . . . , 10. Thus, the ﬁrst group contains all subjects whose estimated probabilities are less than or equal to 0.1, the second group contains all subjects whose estimated probabilities are less than or equal to 0.2, and so on. Let n be the number of subjects in the kth group. The estimated expected I number of successes for the kth group is LI E : p I H H

k : 1, 2, . . . , g

The Hosmer—Lemeshow test statistic is deﬁned as E (O 9 E ) I I C: n p (1 9 p ) I I I I

(14.2.12)

where O is the observed number of successes in the kth group and p is the I I average estimated probability of the kth group, that is, 1 LI p p : H I n I H Under the null hypothesis that the model is adequate, the distribution of C in (14.2.12) is well approximated by the chi-square distribution with g 9 2 degrees of freedom. The test is basically a chi-square test of the discrepancy between the observed and predicted frequencies of success. Thus, a C value larger than the 100 percentage point of the chi-square distribution (or p value less than ) indicates that the model is inadequate. Similar to other chi-square goodness-of-ﬁt tests, the approximation depends on the estimated expected frequencies being reasonably large. If a large number (say, far more than 20%) of the expected frequencies are less than 5, the approximation may not be appropriate and the p value must be interpreted carefully. If this is the case, adjacent groups may be combined to increase the estimated expected frequencies. However, Hosmer and Lemeshow warn that if fewer than six groups are used to calculate C, the test would be insensitive and would almost always indicate that the model is adequate. Most statistical software packages provide programs for logistic regression analysis: for example, SAS (procedures LOGISTIC, PHREG, and CATMOD), BMDP (procedures LR and PR), and SPSS (procedures NOMREG, PROBIT, PLUM, and LOGISTIC). Most of them provide estimates of the coefﬁcients and test statistics, variable selection procedures, and tests of goodness of ﬁt.

390         Example 14.4 In a study of 238 non-insulin-dependent diabetic patients, 10 covariates are considered possible risk factors for proteinuria (the outcome variable). The logistic regression method is used to identify the most important risk factors and to predict the probability of proteinuria on the basis of these risk factors. The 10 potential risk factors are age, gender (1, male; 2, female), smoking status (0, no; 1, yes), percentage of ideal body mass index, hypertension (0, no; 1, yes), use of insulin (0, no; 1, yes), glucose control (0, no; 1, yes), duration of diabetes mellitus (DM) in years, total cholesterol, and total triglyceride. Among the 238 patients, 69 have proteinuria ( y : 1). G Using the stepwise procedure in BMDP, it is estimated that at step 1, the model contains only b and b : 90.896 and l(b ) in (14.2.5) is 9143.292. At step 2, duration of diabetes is added to the model because its maximum log-likelihood value is the largest among all the covariates. The MLEs of the two coefﬁcients are b : 91.467 and b : 90.055, and l(b , b ) : 9139.429. Since X : 92[l(b ) 9 l(b , b )] : 7.726 * which is signiﬁcant (p : 0.005), the duration of DM is related signiﬁcantly to the chance of proteinuria. The Hosmer—Lemeshow test statistic for goodness of ﬁt with only duration of DM in the model, C : 9.814 with 8 degrees of freedom, gives a p value of 0.278. At step 3, gender is added to the model because its addition yields the largest maximum log-likelihood value among all the remaining covariates. The maximum log-likelihood value, l(b , b , b ) : 9137.749, b : 91.453, b : 90.060, and b : 90.279. To test if gender is signiﬁcantly related to proteinuria after duration of DM, we perform the likelihood ratio test X : 92[l(b , b ) 9 l(b , b , b )] : 3.360 * which is signiﬁcant at p : 0.067. The stepwise procedure terminates after the third step because no other covariates are signiﬁcant enough to enter the regression model; that is, none of the other covariates have a p value less than 0.15, which is set by the program (BMDP). If any covariate already in the regression becomes insigniﬁcant after some other variables are in, the insigniﬁcant variable would be removed. The p values for entering and removing a variable can be determined by the user. The default values for entering and removing a variable are, respectively, 0.10 and 0.15. Thus, the procedure identiﬁes duration of DM and gender as the two most important risk factors based on the data given. A question that may be raised at this point is whether one should include gender in the equation since its signiﬁcance level is larger than the commonly used 0.05. The recommendation is to include it since it is close to 0.05 and since the p value should not be the only basis for determining whether a covariate should be included in the model. In addition, the Hosmer—Lemeshow goodness of ﬁt test statistic C : 5.036, when gender is

     

391

Table 14.3 Estimated Coefﬁcients for a Linear Logistic Regression Model Using Data from Diabetic Patients

Variable Constant Duration of DM Sex

Estimated Coefﬁcient

Standard Error

Coefﬁcient/SE

exp(coefﬁcient)

91.453 0.060 90.279

0.264 0.020 0.152

95.504 2.956 91.836

0.234 1.062 0.756

included, yields a p value of 0.754. Thus, inclusion of this covariate improves considerably the adequacy of the model. Thus, the ﬁnal regression equation with the two signiﬁcant risk factors is log

P G : 91.453 ; 0.060 (duration of DM) 9 0.279 (gender) 19P G

Table 14.3 gives the details for the estimated coefﬁcients. The signs of the coefﬁcients indicate that male patients and patients with a longer duration of diabetes have a higher chance of proteinuria. Furthermore, for each increase of one year in duration of diabetes, the log odds increase by 0.060. Probabilities of proteinuria can be estimated following (14.2.1). For example, the probability of developing proteinuria for a male patient who has had diabetes for 15 years is P:

e\ : 0.303 1 ; e\

where 90.832 is obtained by substituting the values of the two covariates in the ﬁtted equation; that is, 91.453;0.060(15)90.279(1) : 90.832. Similarly, for a female patient who has the same duration of diabetes, the probability is 0.248. In addition to individual variables, interaction terms can be included in the logistic regression model. If the association between an independent variable x and the dependent variable y is not the same in different levels of another variable, x , there is interaction between x and x . To check if there is interaction, one can include the product of x and x in the regression model and test the signiﬁcance of this new variable. The following example illustrates the procedure. Example 14.5 It is well known that adriamycin is effective for treating certain types of cancer. It is also well known that adriamycin is highly toxic.

392         Some patients develop congestive heart failure (CHF), but others who receive a similar dose of adriamycin do not. In an attempt to detect factors that would increase the risk of developing adriamycin cardotoxicity, various patient characteristics of 53 cancer patients were studied. Seventeen of these patients developed CHF and 36 patients did not. After a careful investigation, it was found that the total dose (z ) and percentage decrease in electrocardiographic QRS voltage (z ) are most closely related to CHF. Table 14.4 shows the data and some summary statistics. The following linear logistic regression model with transformed variables z : z 9 z and x : z 9 z is used: : log

p :b ;b x ;b x ;b x x 19p

The stepwise procedure selects percentage decrease in QRS as the most important variable, followed by the total dose (TD) and interaction (TD;QRS). The logistic regression analysis results are given in Table 14.5. The stepwise log-likelihood values given in the last column indicate that only QRS is signiﬁcant since 2(910.185 ; 33.254) : 46.138, which yields a p value less than 0.001. Neither the total dose nor the interaction is signiﬁcant. Suppose that the last three columns of Table 14.4, Y, Z1, and Z2, are stored in a text data ﬁle ‘‘C:EX14d2d2.DAT’’, separated by a space. The following SAS, SPSS, or BMDP codes can be used to obtain the results in Table 14.5. SAS code: data w1; inﬁle ‘c:ex14d2d2.dat’ missover; input y z1 z2; x1 : z1-517.679; x2 : z2-26.019; x12 : x1*x2; run; proc logistic data : w1 descending; model y : x1 x2 x12/ selection : s plcl plrl lackﬁt; run;

SPSS code (forward selection method): data list ﬁle : ‘c:ex14d2d2.dat’ free / y z1 z2. Compute x1 : z1-517.679. Compute x2 : z2-26.019. Compute x12 : x1*x2. Logistic regression y with x1 x2 x12 /method : fstep /print : all.

      Table 14.4 Total Dose and Percent Decrease in QRS of 53 Patients Receiving Adriamycin

Patient 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43

CHF?, y

Total Dose, z

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

435 600 600 540 510 740 825 535 510 483 460 460 550 540 310 500 400 440 600 510 410 540 575 564 450 570 480 585 420 470 540 585 600 570 570 510 470 405 575 540 500 450 520

Percent Decrease in QRS, z 41 71 51 40 63 79 61 44 53 27 53 60 65 58 41 64 44 9 42 19 24 924 39 35 10 6 6 21 14 1 33 33 4 2 5 12 91 44 14 910 943 23 91 (Continued overleaf )

393

394         Table 14.4 Continued

Patient

CHF?, y

Total Dose, z

0 0 0 0 0 0 0 0 0 0

495 585 450 450 500 540 440 480 550 500

44 45 46 47 48 49 50 51 52 53

Percent Decrease in QRS, z 29 40 30 23 12 911 7 922 20 19

Source: Minow et al. (1977). ? 1, yes; 0, no; z : 517.679, z : 26.019.

BMDP codes for procedure LR: ﬁle : ‘c:ex14d2d2.dat’ . variables : 3. format : free. /variable names : y, z1, z2. /transform x1 : z1-517.679. x2 : z2-26.019. x12 : x1*x2. /regress depend : y. Interval : x1, x2, x12. Model : x1, x2, x12. Start : in, in, in. Move : 0, 0, 0.

/input

Table 14.5 Linear Logistic Regression Analysis Results of Data in Table 14.4

Variable Constant QRS TD TD;QRS

Estimated Coefﬁcient

Standard Error

Coefﬁcient/SE

Log Likelihood

93.757 0.254 90.024 0.001

1.576 0.102 0021 0.001

92.384 2.480 91.160 0.677

933.254 910.185 99.225 98.803

      /print /end

395

Method : mlr. cell : used.

When the independent variables are dichotomous or polychotomous, the logistic regression coefﬁcients can be linked with odds ratios. Consider the simplest case, where there is one independent variable, x , which is either 0 or 1. The linear regression model in (14.2.1) and (14.2.2) becomes eb;b x P( y : 1 x ) : 1 ; eb;bx 1 P( y : 0 x ) : 1 ; eb;bx Values of the model when x : 0, 1 are eb P( y : 1 x : 0) : 1 ; eb eb;b P( y : 1 x : 1) : 1 ; eb;b 1 P( y : 0 x : 0) : 1 ; eb 1 P( y : 0 x : 1) : 1 ; eb;b The odds ratio in (14.1.4) is OR :

P( y : 1 x : 1)/P( y : 0 x : 1) eb;b : b : eb P( y : 1 x : 0)/P( y : 0 x : 0) e

and the log odds ratio is log(OR) : log(eb) : b [this can also be derived directly from (14.2.11)]. Thus, the estimated logistic regression coefﬁcient also : eb . If (b , b ) is the provides an estimate of the odds ratio, that is, OR * 3 conﬁdence interval for b , the corresponding interval for OR is (e b*, eb3 ). Example 14.6 Consider the age (x) and response (y) data from the 71 leukemia patients presented in Table 14.6 (Examples 14.1 and 14.2). The logistic regression analysis results are given in Table 14.7. Notice that exp(b ) : exp(1.5994) : 4.95, which is equal to the estimate of OR obtained in Example 14.2 using (14.1.5), and the standard error of b is the same as that except for a small rounding-off error. The conﬁdence interval for OR of log OR can also be obtained from the logistic regression analysis results.

396         Table 14.6 Age and Response Data of 71 Leukemia Patients Response Yes (1) No (0) Total

x 50(1)

x 50(0)

Total

27 12 39

10 22 32

37 34 71

Table 14.7 Results of Logistic Regression Analysis of Data in Table 14.6

Variable Constant (b ) Age(b )

Estimated Coefﬁcient

Standard Error

Coefﬁcient/SE

exp(coefﬁcient)

90.7885 1.5994

0.3814 0.5156

92.067 3.102

0.45 4.95

The relationship between the logistic regression coefﬁcient and odds ratio can be extended to polychotomous variables by creating dummy variables (or design variables). The following example illustrates the procedure. Example 14.7 Consider the data in Example 14.3. The variable marrow absolute inﬁltrate (MAI) has three levels. As in Example 14.3, the 45% level is considered as the reference group. In this case, two design variables will be used and their values are assigned as follows:

1 if MAI : 46—90% D : 0 otherwise

1 if MAI 90% D : 0 otherwise

For MAI, the design variable values and the respective number of responders (Event) and total number of patient in each MAI level (N) are listed in the following table.

MAI(%)

45 46—90 90

D

0 1 0

D

0 0 1

Event

N

4 20 13

16 39 16

Using these design variables, the logistic regression analysis gives the results in Table 14.8.

     

397

Table 14.8 Results of Logistic Regression Analysis of Data in Example 14.7 and Two Design Variables

Variable Constant MAI (D ) MAI (D )

Estimated Coefﬁcient

Standard Error

Coefﬁcient/SE

exp(coefﬁcient)

91.0986 1.1499 2.5649

0.5774 0.6603 0.8623

91.903 1.742 2.974

0.33 3.16 13.00

The coefﬁcient corresponding to D , 1.1499, is the log odds ratio between the 46—90% group and the 45% group. The odds ratio is exp(1.1499) : 3.16, which is exactly equal to the estimate obtained in Example 14.3. Similarly, the coefﬁcient corresponding to D is the log odds ratio between the 90% group and the 45% group. The odds ratio obtained from the regression coefﬁcient, 13.00, is the same as that obtained in Example 14.3. The estimated standard error for D , 0.6603, is also the standard error of . A 95% conﬁdence interval for the coefﬁcient is 1.1499 < 1.96(0.6603), log OR or (90.1443, 2.4441), and consequently, a 95% conﬁdence interval for OR is (e\ , e ), or (0.86, 11.52), which is identical to that obtained in Example 14.3 using Woolf’s estimate of SE(log OR). Suppose that the data in Example 14.6 are arranged in four columns for D , D , Event, and N as in the table above and are saved in a text data ﬁle ‘‘C:EX14d2d4.DAT’’. The values of D , D , Event, and N in each row are separated by a space. The following SAS, SPSS, or BMDP codes can be used to obtain the results in Table 14.8. SAS code: data w1; inﬁle ‘c:ex14d2d4.dat’ missover; input d1 d2 event n; run; proc logistic data : w1 ; model event/n : d1 d2 / plcl plrl; run;

SPSS code: data list ﬁle : ‘c:ex14d2d4.dat’ free / d1 d2 event n. Probit event OF n WITH d1 d2 /model : logit /log : 2.718 /print : all.

398         BMDP code for procedure LR: /input

/variable /regress

/print /end

ﬁle : ‘c:ex14d2d4.dat’ . variables : 4. format : free. names : d1, d2, event, n. count is n. fcount is event. Interval : d1, d2. cell : used.

For a continuous independent variable, the logistic regression coefﬁcient gives the change in log odds for an increase of 1 unit in the variable. In general, for an increase of m units in the variable, the log odds ratio is equal to m times the logistic regression coefﬁcient. The derivation is left to the reader as an exercise. When more than one independent variable is included in the logistic regression model, each estimated coefﬁcient can be interpreted as an estimate of the log odds ratio statistically adjusting for all the other variables. For example, in Example 14.4, the regression coefﬁcient for the gender variable, 90.279, is an estimate of the log odds ratio for females versus males, adjusting for duration of diabetes. Or the adjusted odds ratio for females versus males is estimated as exp(90.279) : 0.76; suggesting that female diabetic patients have a lower risk of having proteinuria than that of male patients, after adjusting for duration of diabetes. This interpretation, commonly used by epidemiologists, is appropriate if the linear relationship between the log odds and the independent variables holds. Press and Wilson (1978) compare the logistic regression method to the discriminant analysis and ﬁnd that if the independent variables are normal with identical covariance matrices, discriminant analysis is preferred. Under abnormality, the logistic regression method is preferred. In particular, if the independent variables are dichotomous, we cannot expect to predict accurately the probability of success with a discriminant function, even with a large amount of data. Their examples show that the logistic regression gives a higher correct classiﬁcation rate. 14.2.2 Logistic and Conditional Logistic Regression Model for Retrospective Studies As mentioned earlier, the logistic regression model deﬁned in (14.2.3) is originally designed for prospective studies, where a set of covariates or independent variables are measured at a baseline examination on a group of people without the disease of interest. These subjects are then followed for a period of time and development of the disease among them are recorded during

     

399

follow-up. The model can be extended to analyze data from retrospective studies, such as a case—control study. In a case—control study, cases (subjects with the disease of interest) and controls (subjects without the disease) are ﬁrst selected and risk factor data such as exposure variables and other covariates are collected retrospectively. For example, in a case—control study of lung cancer and cigarette smoking, a group of lung cancer patients and a group of people without lung cancer are selected. Their smoking histories are then collected along with other risk factors. Therefore, in a case—control study, participants are selected ﬁrst based on their disease status, and their history of risk factor exposures is collected later. The purpose of a case—control study is to estimate the association between the risk factors and the disease under study. Using probability terms, we are dealing with the probability that the risk factors take on certain values given that a person is a case or a control. We denote this conditional probability by P(x y), where x denote the covariates and y the outcome variable. Using the same notation, the probability of interest in a prospective study is P( y x). Based on conditional probability theory, P(x y) can be written as P(x y) :

P( y x)P(x) P( y)

(14.2.13)

where y : 1 for cases and 0 for controls. Thus, P(x y) is a function of P( y x), P(x), and P(y). The likelihood function of the logistic regression model for a retrospective study, similar to (14.2.4), is the product of terms in the form of P(x y) in (14.2.13) for the cases and controls selected [(P(x y : 1) from a case and P(x y : 0) from a control)]. We introduce here two most widely used approaches to this likelihood function. One approach considers the probability of case/control selection. Since in case—control studies, the cases and controls are selected from the population and the likelihood function is based on subject selection, we introduce an indicator variable to denote whether a person is selected (s : 1) or is not selected (s : 0). Let n and n be, respectively, the numbers of selected cases and controls in the study. The likelihood function is L

L L : P(x y : 1, s : 1) P(x y : 0, s : 1) G G G G G G

(14.2.14)

Deﬁne : P(s : 1 y : 1) to be the probability that a diseased person is selected for the study as a case and : P(s : 1 y : 0)

400         to be the probability that a disease-free person is selected for the study as a control. Assume that the sampling probabilities depend only on disease status and not on the covariates. Using Bayes’ theorem in probability theory and (14.2.1), it can be shown (the derivation is left to the reader as an exercise) that the probability that a person is diseased given that he or she has risk factors x and was selected for the study can be written as exp(b* ; N b x ) H H GH P( y : 1 x , s : 1) : G G 1 ; exp(b* ; N b x ) H H GH

(14.2.15)

b* : b ; log

(14.2.16)

where

According to the conditional probability in (14.2.13), the ﬁrst term in the likelihood function in (14.2.14) is

exp(b* ; N b x ) P(x s : 1) H H GH G P( x y : 1, s : 1) : G G 1 ; exp(b* ; N b x ) P( y : 1 s : 1) H H GH

(14.2.17)

(14.2.18)

Similarly, the second term in (14.2.14) for y : 0 can be obtained: G

1 P(x s : 1) G P(x y : 0, s : 1) : G G 1 ; exp(b* ; N b x ) P( y : 0 s : 1) H H GH

Substituting (14.2.17) and (14.2.18) into (14.2.14), we obtain the likelihood function for a case—control study: L

L P(x s : 1) G : L (b *, b , . . . , b ); N P( y s : 1) G

(14.2.19)

where n : n ; n , L (b *, b , . . . , b ) is the likelihood function for prospective N studies in (14.2.4) except that the intercept term b is replaced by b* in (14.2.16). If we assume that the probability distribution of the covariates, P(x), contains no information about the parameters of interest, or P(x) is independent of the coefﬁcients b , and the selection is independent of x, then H maximizing L to obtain estimates of b is equivalent to maximizing only L (b * , H b , . . . , b ) since P( y : 1 s : 1) : n /n and P( y : 0 s : 1) : n /n. This im N plies that we can use the computer program for prospective studies to analyze case—control study data except that the intercept term cannot be interpreted meaningfully unless and are known. In most practical situations, the assumption made above about P(x) is reasonable. Historically, in early applications of the logistic regression method, the covariates were assumed to have multivariate normal distribution. Then

     

401

estimation of the coefﬁcients, b in (14.2.19), would involve the distribution P(x) H and thus became much more complicated. However, in practice, many of the covariates are categorical or discrete and are therefore distinctly nonnormal. Thus, it is appropriate to allow P(x) to remain completely arbitrary and use simply L (b *, b , . . . , b ) in (14.2.19) in case—control studies. N Another approach to the likelihood function based on (14.2.13) is to consider a conditional probability instead. Suppose that n cases and n controls were selected in a case—control study and n : n ; n ; let x , x , . . . , x be the risk factor sets of the n subjects without specifying which of L them pertain to the cases and which to the controls. Then the conditional probability that the ﬁrst n x’s are observed from the n cases and the remainder are from the n controls may be written as L P(x y : 1) L P(x y : 0) G GL> G G l ,...,l ( L P(x y : 1) L P(x y : 0)) L G GL> JG JG

(14.2.20)

where the summation in the denominator is over the n!/(n ! n !) possible ways of selecting n individuals as cases from the n subjects, with the remaining n as controls. By using (14.2.13) and (14.2.1), (14.2.20) reduces to L exp(N b x ) G H H GH l ,...,l L exp(N b x ) L G H H JGH

(14.2.21)

Comparing with (12.1.17), (14.2.21) can be considered as a special case of (12.1.17) in which there is only one distinct uncensored failure time, say at t : 1, and all of the n persons failed at t : 1. The remaining n subjects survive longer than 1 and are censored, say at t : 2, while all n subjects are at risk at t : 1. This interpretation of (14.2.21) permits us to apply the method and computer software for the Cox proportional hazards model with a discrete time scale and ties to obtain an estimate of b in the logistic regression model and to perform the corresponding inferences. The procedure is illustrated in Example 14.8. When n and n are large enough, it can be shown that an analysis based on this conditional probability will produce results equivalent to those based on the likelihood function deﬁned in (14.2.19) (Efron, 1975; Farewell, 1979; Breslow and Day, 1980). When n and n are large, one may prefer using (14.2.19) to (14.2.21) since the former is easier. However, for a case—control study with a matched or stratiﬁed design, analysis based on the conditional probability deﬁned in (14.2.21) is a better choice than (14.2.19) (Efron, 1975; Farewell, 1979; Breslow and Day, 1980). In the following section we discuss the application of logistic regression analysis for two widely accepted matched designs in case—control studies. 1 : R Matched Design A widely used case—control design is to have one or more controls matched

402         for each case based on matching variables such as age and gender. Suppose that for each case there are R( 1) matched controls. Let x denote the GHI observed value of the jth covariate ( j : 1, . . . , p) from the kth subject (k : 1 for the case and k : 2, . . . , R ; 1 for matched controls) in the ith matched set (i : 1, . . . , n). The n matched sets are considered as the samples from the n different strata deﬁned by the matching variables. Following (14.2.21) with n : 1 and n : R, the conditional probability for the matched set (1 case and R controls) in the ith stratum is exp(N b x ) 1 H H GH : exp(N b x ) ; 0> exp(N b x ) 1 ; 0> exp[N b (x 9 x )] H H GH I H H GHI I H H GHI GH (14.2.22) and thus the conditional likelihood function for all n strata is the product of the n terms in (14.2.22), that is, L 1 1 ; 0> exp[N b (x 9 x )] I H H GHI G GH

(14.2.23)

When R : 1, that is, a one-to-one pair matching, the conditional likelihood function obtained from (14.2.23) reduces to L 1 L (b , . . . , b ): N 1;exp[N b (x 9x )] H H GH GH G L exp[N b (x 9x )] H H GH GH : 1;exp[N b (x 9x )] H H GH G GH

(14.2.24)

Compared with the likelihood function for the ordinary logistic regression in (14.2.4), the conditional likelihood function (14.2.24) can be treated as a special case of (14.2.4) with y Y 1, b Y 0, and x can be replaced by the difference in G GH x between the case and its matched control. This fact permits the use of GH computer programs for ordinary logistic regression in one-to-one matched case—control studies. The procedure is as follows: 1. Let n be the number of case—control pairs. 2. Use x 9 x , the difference between covariates for the case (x ) and GH GH GH its matched control (x ), as the independent variable in the model. GH 3. Let y Y 1 for all pairs. G 4. Delete the intercept term b from the model.

     

403

n1 : n0 Matched Design or Stratified Design Suppose that there are n cases and n controls in the ith stratum and n : n ; n . Let x denote the observed value of the jth covariate GHI ( j : 1, . . . , p) from the kth subject (k : 1, 2, . . . , n for the n cases and k : n ; 1, . . . , n for the n controls) in the ith stratum (i : 1, . . . , m). From (14.2.21), the contribution of the ith stratum to the conditional likelihood function is L exp(N b x ) I H H GHI k ,...,k L exp(N b x ) L J H H GHIJ

(14.2.25)

where the summation in the denominator is over all the n!/(n ! n !) possible ways to select n out of the n subjects as cases and the remaining n as controls. The term in (14.2.25) has the same mathematical form as (14.2.21). Thus, as discussed earlier, the computer software for the proportional hazards model can be used to estimate the coefﬁcients. In both 1 : R and n : n matched designs, most of the other features in the ordinary logistic regression model ﬁtting, including the use of design (dummy) variables and statistical inferences, remain the same. However, the goodness of ﬁt test of Hosmer and Lemeshow is not applicable to matched designs. Readers who are interested in assessing the logistic regression model in matched case—control studies are referred to Pregibon (1984) and Moolgavkar et al. (1985). The following example illustrates the basic procedure for the one-to-one matched design using (14.2.24). Example 14.8 To study the effect of obesity, family history of diabetes, and level of physical activity to non-insulin-dependent diabetes (NIDDM), 30 nondiabetic persons are matched with 30 NIDDM patients by age and gender. Obesity is measured by body mass index (BMI), which is deﬁned as weight in kilograms divided by height in meters squared. Family history of diabetes (FH) and levels of physical activity (PHY) are binary variables. Table 14.9 gives the partially ﬁctitious data. Following the procedure given above, the results of ﬁtting the three variables using BMDP are given in Table 14.10. Suppose that text data ﬁle ‘‘C:EX14d2d5.DAT’’ contains six successive columns of data: BMIC, FHC, PHYC, BMIN, FHN, and PHYN, as in Table 14.9, separated by a space. The following SAS, SPSS, or BMDP code can be used to generate the results in Table 14.10. SAS code: data w1; inﬁle ‘c:ex14d2d5.dat’ missover; input bmic fhc phyc bmin fhn phyn; bmi : bmic-bmin;

404         Table 14.9 Data of 30 Matched Case--Control Pairs Case (Diabetic)

Control (Nondiabetic)

Pair

BMI

FH?

PHY@

BMI

FH?

PHY@

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

22.1 31.3 33.8 33.7 23.1 26.8 32.3 31.4 37.6 32.4 29.1 28.6 35.9 30.4 39.8 43.3 32.5 28.7 30.3 32.5 32.5 21.6 24.4 46.7 28.6 29.7 29.6 22.8 34.8 37.3

1 0 1 1 1 1 1 1 1 1 0 0 0 0 0 1 0 0 0 1 1 1 0 1 1 0 0 0 1 1

1 0 0 1 1 0 0 0 0 0 1 1 0 0 0 0 0 1 0 0 0 1 1 0 1 0 1 0 0 0

26.7 24.4 29.4 26.0 24.2 29.7 30.2 23.4 42.4 25.8 39.8 31.6 21.8 24.2 27.8 37.5 27.9 25.3 31.3 34.5 25.4 27.0 31.1 27.3 24.0 33.5 20.7 29.2 30.0 26.5

0 0 0 0 1 0 0 0 0 0 0 0 1 0 1 1 1 1 0 1 0 1 0 0 0 0 0 1 0 0

1 1 0 0 0 0 1 1 0 0 1 0 1 1 1 1 1 0 1 1 1 1 0 1 0 0 0 1 1 0

? 1, yes; 0, no. @ 1, physically active; 0, sedentary.

fh : fhc-fhn; phy : phyc-phyn; y : 1; run; proc logistic data : w1; model y : bmi fh phy / noint plcl plrl lackﬁt; run;

     

405

Table 14.10 Results of a Logistic Regression Analysis of Data in Table 11.13

Variable

Estimated Coefﬁcient

Estimated Standard Error

Coefﬁcient/SE

exp(coefﬁcient)

0.090 0.968 90.563

0.065 0.588 0.541

1.381 1.646 91.041

1.094 2.633 0.569

BMI FH PHY

SPSS code: data list ﬁle : ‘c:ex14d2d5.dat’ free / bmic fhc phyc bmin fhn phyn. Compute bmi : bmic-bmin. Compute fh : fhc-fhn. Compute phy : phyc-phyn. Compute y : 1. Logistic regression y with bmi fh phy /origin /print : all.

BMDP LR code: ﬁle : ‘c:ex14d2d5.dat’ . variables : 6. format : free. /variable names : bmic, fhc, phyc, bmin, fhn, phyn. /transform bmi : bmic-bmin. fh : fhc-fhn. phy : phyc-phyn. y : 1. /regress depend : y. Interval : bmi, fh, phy. Model : bmi, fh, phy. Start : in, in, in. Constant : out. Move : 0, 0, 0. Method : mlr. /print cell : used. /end

/input

The following example illustrates the estimating procedures for the 1 : R and n : n matched case—control designs. Example 14.9 Table 14.11 lists a subset of simulated data from a case— control diabetes study that is based on a cohort study of heart disease with a

406         Table 14.11 A Subset of Age-Group and Gender-Matched DM Data in Example 14.9? AGE

51.8 50.9 50.9 50.9 54.6 50.8 53.3 72.0 73.1 72.8 70.3 72.1 72.8 71.1 56.4 55.7 56.9 58.5 55.2 55.9 57.4 60.7 62.0 64.7 64.4 60.5 62.4 62.8 73.2 73.0 72.2 73.7 71.7 71.2 74.5 58.2 57.3 58.7 57.2 57.2 55.5 59.5 78.4 77.8 75.5 78.3

AGEG SEX

50 50 50 50 50 50 50 70 70 70 70 70 70 70 55 55 55 55 55 55 55 60 60 60 60 60 60 60 70 70 70 70 70 70 70 55 55 55 55 55 55 55 75 75 75 75

1 1 1 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

SBP

DBP LACR HDL LINSUL SMOKE DMS

148 116 114 120 119 123 119 129 120 111 115 140 136 133 110 122 114 104 128 130 116 136 115 155 191 109 106 234 119 128 124 128 111 104 140 112 111 120 120 112 120 156 119 112 123 149

91 95 85 80 71 78 75 73 68 66 65 66 72 85 74 77 74 74 77 83 79 85 74 89 107 74 72 91 72 70 69 72 68 67 82 77 77 76 73 73 73 76 75 74 74 84

1.35 1.04 1.26 1.56 1.55 1.40 1.69 1.06 0.87 2.52 3.16 3.18 3.36 2.95 0.58 1.18 1.10 1.24 1.25 1.34 2.23 2.04 1.32 2.55 3.66 0.89 0.88 7.28 1.00 2.87 1.43 2.12 3.16 3.00 2.84 2.84 2.23 1.85 0.55 0.49 90.53 3.22 1.28 1.39 1.41 0.53

37 43 64 52 30 33 40 25 30 73 42 52 59 73 43 34 25 23 43 44 38 42 33 46 34 64 35 49 47 51 33 38 64 40 46 71 41 60 48 45 49 59 53 44 72 40

2.81 2.74 1.98 2.53 2.87 3.31 2.13 2.69 2.76 3.17 2.96 3.48 3.22 3.25 2.18 2.76 2.62 2.58 2.77 2.34 2.46 3.66 2.85 3.73 2.67 2.88 3.44 2.38 2.53 2.62 2.49 3.30 3.14 3.30 2.95 2.23 2.57 2.57 3.10 2.86 3.12 3.14 1.72 1.80 1.93 2.84

0 0 1 1 0 0 1 0 0 0 0 0 0 0 0 1 0 0 0 1 1 0 0 1 1 0 1 1 0 0 0 0 0 0 1 0 0 0 0 0 0 1 1 1 0 0

1 1 1 1 2 2 3 1 1 2 2 2 2 3 1 1 1 1 2 2 3 1 1 1 2 2 2 3 1 1 1 2 2 2 3 1 1 1 2 2 2 3 1 1 1 1

DM

SN

0 0 0 0 0 0 1 0 0 0 0 0 0 1 0 0 0 0 0 0 1 0 0 0 0 0 0 1 0 0 0 0 0 0 1 0 0 0 0 0 0 1 0 0 0 0

1 1 1 1 1 1 1 2 2 2 2 2 2 2 3 3 3 3 3 3 3 4 4 4 4 4 4 4 5 5 5 5 5 5 5 6 6 6 6 6 6 6 7 7 7 7

     

407

Table 14.11 Continued AGE 76.9 75.4 77.9 68.0 66.2 65.8 68.8 68.0 67.9 67.8 63.1 61.3 60.8 61.8 63.1 60.7 62.2 78.7 77.4 78.0 75.2 77.8 78.5 78.5 56.5 58.8 55.7 57.8 57.3 55.4 56.9 53.3 50.8 50.3 55.0 54.4 53.3 50.7

AGEG SEX 75 75 75 65 65 65 65 65 65 65 60 60 60 60 60 60 60 75 75 75 75 75 75 75 55 55 55 55 55 55 55 50 50 50 50 50 50 50

0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

SBP 153 144 156 123 131 136 120 162 115 132 123 122 131 109 114 130 133 147 167 165 117 151 137 156 108 104 135 110 153 141 123 113 143 136 131 132 135 114

DBP LACR HDL LINSUL SMOKE DMS 75 77 86 70 72 80 66 60 54 79 80 78 83 69 73 76 85 85 84 85 70 75 74 81 71 73 77 74 91 94 78 74 89 79 77 77 77 78

3.78 4.57 5.38 1.62 1.71 3.82 2.20 2.35 2.33 2.68 1.81 1.41 2.43 1.27 1.04 0.84 2.10 0.48 0.92 0.44 2.05 4.27 2.13 5.33 1.58 2.55 2.06 2.59 0.54 1.47 3.72 1.19 3.45 91.44 0.23 90.08 0.48 2.52

43 45 39 48 56 56 45 62 39 42 46 85 31 61 38 46 37 58 71 49 42 41 40 52 41 34 106 49 44 61 40 46 78 48 49 34 37 41

2.95 2.54 3.34 2.49 2.47 2.84 2.45 3.86 3.92 2.47 1.93 1.88 1.90 2.35 2.53 2.59 3.04 2.62 2.66 3.02 2.88 2.76 2.86 327 2.27 2.53 2.32 2.37 3.13 3.15 3.18 2.71 1.84 2.48 2.57 2.45 2.93 4.37

0 0 0 0 0 1 0 0 0 0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 1 1 0 1 0

2 2 3 1 1 1 1 2 2 3 1 1 1 2 2 2 3 1 1 1 2 2 2 3 1 1 1 1 2 2 3 1 1 2 2 2 2 3

DM

SN

0 0 1 0 0 0 0 0 0 1 0 0 0 0 0 0 1 0 0 0 0 0 0 1 0 0 0 0 0 0 1 0 0 0 0 0 0 1

7 7 7 8 8 8 8 8 8 8 9 9 9 9 9 9 9 10 10 10 10 10 10 10 11 11 11 11 11 11 11 12 12 12 12 12 12 12

? AGEG : 50 if 50 age55, :55 if 55 age60, :60 if 60 age65, :65 if 65 age70, :70 if 70 age75, :75 if 75 age80; SEX : 1 if male and :0 if female; SMOKE : 1 if current smoker and 0 otherwise; SBP, systolic blood pressure; DBP, diastolic blood pressure; LACR, logarithm of the ratio of urinary albumin and creatinine; HDL, high-density lipoprotein in cholesterol; LINSUL, logarithm of insuline; DM : 1 if fasting glucose 126 mg/dL and :0 otherwise; DMS, diabetic status deﬁned by ADA fasting glucose criterion: DMS : 1 if normal fasting glucose, :2 if impaired fasting glucose, and :3 if diabetic; SN, stratum number.

408         Table 14.12 Results from the Conditional Logistic Regression Model for the DM Data in Example 14.9 95% Conﬁdence Interval for Odds Ratio Variable

Regression Coefﬁcient

Standard Error

Chi-Square Statistic

p

Odds Ratio

Lower

Upper

AGE DBP LACR LINSUL

0.327 0.046 0.395 0.860

0.161 0.020 0.133 0.288

4.127 5.639 8.776 8.900

0.0422 0.0176 0.0031 0.0029

1.39 1.05 1.48 2.36

1.01 1.01 1.14 1.34

1.90 1.09 1.93 4.16

baseline and second examinations (about ﬁve years after the baseline examination). In this study, 33 persons with diabetes at the second examination are selected, and for each of these cases, six age group (in ﬁve-year interval)- and gender-matched diabetes-free controls are selected randomly from all participants without diabetes in the second examination. There are 33 strata and each stratum contains one case (DM : 1) and its six matched controls (DM : 0), for a total of 231 participants. The demographic, physical, blood, and urinary data collected at the baseline examination of the ﬁrst 12 strata are listed in Table 14.11 and arranged by stratum. The conditional logistic model based on (14.2.20) is used for these 1:6 matched data to identify risk factors for diabetes. The stepwise selection method is used to select the signiﬁcant risk factors. The results are shown in Table 14.12. AGE, DBP, LACR, and LINSUL are signiﬁcant risk factors for diabetes. The larger the values of AGE, DBP, LACR, and LINSUL, the higher is the risk of being diabetic. As noted earlier, for (14.2.21), the computer software for a Cox proportional model with discrete time scale can be used to obtain an estimate of parameter b. Suppose that the text data ﬁle ‘‘C:EX14d2d6.DAT’’ contains 12 successive columns, separated by a space, with data as in Table 14.11: AGE, AGEG, SEX, SBP, DBP, LACR, HDL, LINSUL, SMOKE, DMS, DM, and SN. The following SAS code shows how the SAS procedure for the proportional hazards model with discrete time scale can be used to obtain an estimate of parameter b for the conditional logistic regression model in a matched case—control study (the results are given in Table 14.12). In the SAS code, ﬁrst, we deﬁne a nominal variable (for survival time), TIME, and let TIME : 1 if a case (DM : 1), and : 2 if a control (DM : 0). This is accomplished by the statement ‘‘time : 2-dm;’’. Second, DM is also used to indicate censoring status, DM : 0 meaning censored, and : 1 uncensored. Thus, a case will have an uncensored time 1 and a control will have a censored time 2. data w1; inﬁle ‘c:ex14d2d6.dat’ missover;

     

409

Table 14.13 Data from Example 14.9 If Stratiﬁed by Age Group Only

Stratum

AGEG

1 2 3 4 5 6

50—54 55—59 60—64 65—69 70—74 75—79

Total

Number of DMs

Number of Non-DMs

Total

9 8 4 4 5 3 — 33

54 48 24 24 30 18 —— 198

63 56 28 28 35 21 —— 231

input age ageg sex sbp dbp lacr hdl linsul smoke dms dm sn; time : 2-dm; run; proc phreg data : w1 noprint; model time*dm(0) : age sbp dbp lacr hdl linsul smoke / ties : discrete selection : s; strata sn; run;

Using the same data, if we stratify by age group only, Table 14.13 lists the number of cases and controls in each age group (stratum). This can be considered as an example of a stratiﬁed design with a different numbers of cases and controls in each stratum: stratum 1 has a 9 : 54 match, stratum 2 an 8 : 48 match, and so on. The results from the conditional logistic regression model based on this new stratiﬁcation are given in Table 14.14. Table 14.14 Results from the Conditional Logistic Regression Model for the Data in Example 14.9 with Strata Deﬁned by Age Groups 95% Conﬁdence Interval for Odds Ratio Variable

Regression Coefﬁcient

Standard Error

Chi-Square Statistic

p

Odds Ratio

Lower

Upper

DBP LACR HDL LINSUL

0.050 0.391 90.037 0.694

0.020 0.124 0.019 0.292

6.304 9.876 4.034 5.668

0.0120 0.0017 0.0446 0.0173

1.05 1.48 0.96 2.00

1.01 1.16 0.93 1.13

1.09 1.89 1.00 3.55

410         The following SAS code can be used to generate the results in Table 14.14. The code can be modiﬁed to perform conditional logistic regression analysis for data from any n : n matched design or a stratiﬁed design. data w1; inﬁle ‘c:ex14d2d6.dat’ missover; input age ageg sex sbp dbp lacr hdl linsul smoke dms dm sn; time : 2-dm; run; proc phreg data : w1 noprint; model time*dm(0) : age sex sbp dbp lacr hdl linsul smoke / ties : discrete selection : s; strata ageg; run;

14.2.3 Other Models for Dichotomous Outcomes In the logistic regression model (14.2.3), the left side is a function of the probability of success, P , and the right side is the linear combination of G covariates. The function, called a link function, deﬁnes the relationship between the covariates and P . In general, a link function represents the underlying G biological, physical, or epidemiological relationship between the mean of the dependent variable (probability of success) and the covariates x , x , . . . , x . In N the logistic regression model the link function, say g, is the logit function of P , G that is, P G g(P ) : logit(P ) : log G G 19P G and g(P ) is assumed to be linearly related to the covariates, that is, G log

N P G : bx H GH 19P G H

or exp(. b x ) H H GH P: G 1 ; exp(. b x ) H H GH

(14.2.26)

Two other forms of link function g(P) that assume a linear relationship with the covariates have been proposed and used in the literature. In the following, we introduce these two link functions and the corresponding regression model. 1. T he probit (or normit) function. This is the link function deﬁned by the inverse of the cumulative standard normal distribution function, \( · ): g(P ) : \(P ) G G

(14.2.27)

     

411

The corresponding model is N \(P ) : b x G H GH H or P : G

. bx H GH H

(14.2.28)

2. The complementary log-log link function. This function is deﬁned by g(P ) : log[9log(1 9 P )] G G

(14.2.29)

The corresponding model is N log[9log(1 9 P )] : b x G H GH H or

. P : 1 9 exp 9exp b x G H GH H

(14.2.30)

The logistic regression model in (14.2.26) is for binary outcomes such as diseased versus nondiseased. The model (14.2.28) can be thought of as an alternative model for binary outcome. In addition, it can be used to model those binary outcomes that are deﬁned by a cutoff point on the basis of a normally distributed variable. For example, the cutoff point may be deﬁned by the last quintile or quartile of a continuous measurement in an epidemiological study. When the binary outcomes are deﬁned by a cutoff point in an asymmetric distribution, the model in (14.2.30) may be appropriate. The model (14.2.30) can also be considered as a version of the Cox proportional hazards model for grouped survival times (Kalbﬂeisch and Prentice, 1973). Let y , y , . . . , y be the observations with dichotomous values on the n L subjects: y : 1 for success and y : 0 for failure. Similar to (14.2.4), the G G likelihood functions for the models in (14.2.28) and (14.2.30) can be obtained by replacing the corresponding P in the following formula: G L L (b , b , . . . , b ) : PWG(1 9 P )\WG G N G G The MLEs of the coefﬁcients and the asymptotic likelihood inferences are similar to those given in Section 14.2.1 for the ordinary logistic regression model except that interpretation of the odds ratio is not possible for the latter two models. The procedure LOGISTIC in SAS provides options for all three models.

412         Example 14.10 Consider the data in Example 14.9 as nonstratiﬁed data, Table 14.15 gives the results from the regression models deﬁned in (14.2.26), (14.2.28), and (14.2.30) by using the stepwise selection method. Based on Hosmer—Lemeshow test statistics, the regression model with the inverse normal link function gives a good ﬁt to the data (p : 0.4956), whereas the other two models do not (p : 0.0152 and p : 0.0261). All three models identify DBP, LACR, and LINSUL as signiﬁcant covariates for the development of diabetes. The following SAS, SPSS, and BMDP codes may be used to generate the results in Table 14.15. SAS code: data w1; inﬁle ‘c:ex14d2d6.dat’ missover; input age ageg sex sbp dbp lacr hdl linsul smoke dms dm sn; run;

Table 14.15 Asymptotic Partial Likelihood Inference from the Regression Models with Different Link Functions for the Data in Example 14.9 95% Conﬁdence Interval for Odds Ratio Variable

Regression Coefﬁcient

Standard Error

Chi-Square Statistic

p

Odds Ratio

Lower

Upper

1.05 1.41 2.39

1.01 1.13 1.38

1.08 1.79 4.27

Model with L ogit L ink Function INTERCPT 98.419 1.792 DBP 0.044 0.018 LACR 0.343 0117 LINSUL 0.870 0.287 Hosmer—Lemeshow test statistic

22.061 5.673 8.627 9.191 18.9460

0.0001 0.0172 0.0033 0.0024 0.0152

Model with Inverse Normal Link Function INTERCPT 94.532 0.953 DBP 0.023 0.010 LACR 0.186 0.065 LINSUL 0.445 0.156 Hosmer—Lemeshow test statistic

22.597 5.302 8.060 8.146 7.386

0.0001 0.0213 0.0045 0.0043 0.4956

Model with Log-Log Link Function INTERCPT 97.740 1.530 DBP 0.038 0.016 LACR 0.305 0.096 LINSUL 0.785 0.241 Hosmer—Lemeshow test statistic

25.589 5.919 10.153 10.592 17.415

0.0001 0.0150 0.0014 0.0011 0.0261

   

413

title ‘‘Regression model with the logit link function-generalized logistic regression’’; proc logistic data : w1 descending; model dm : age sex sbp dbp lacr hdl linsul smoke / selection : s lackﬁt link : logit; run; title ‘‘Regression model with the inverse normal link function‘; proc logistic data : w1 descending; model dm : age sex sbp dbp lacr hdl linsul smoke / selection : s lackﬁt link : probit; run; title ‘‘Regression model with the log-log link funtion‘; proc logistic data : w1 descending; model dm : age sex sbp dbp lacr hdl linsul smoke / selection : s lackﬁt link : cloglog; run;

SPSS code for the model in (14.2.28) with the forward selection method: data list ﬁle : ‘c:ex14d2d6.dat’ free / age ageg sex sbp dbp lacr hdl linsul smoke dms dm sn. Logistic regression dm with age sex sbp dbp lacr hdl linsul smoke htn /method : fstep /print : all.

BMDP code for procedure LR and the model in (14.2.28): /input

/variable

/regress

/print /end

ﬁle : ‘c:ex14d2d6.dat’ . variables : 12. format : free. names : age, ageg, sex, sbp, dbp, lacr, hdl, linsul, smoke, dms, dm, sn. Use : age, sex to smoke. depend : dm. Interval : age, sex to smoke. Method : mlr. cell : used.

14.3 MODELS FOR POLYCHOTOMOUS OUTCOMES The regression models in Section 14.2 can be extended to handle outcomes that have more than two categories. These categories may be nominal, for example, different types of heart disease or psychological conditions; or ordinal, for example, different levels of glucose intolerance or different severity of communication disorders. An outcome variable with more than two possibilities is called polychotomous or polytomous. In this section we discuss ﬁrst the model for

414         nominal polychotomous outcomes (generalized logistic regression model), then the model for ordinal polychotomous outcomes (ordinal regression model). Details regarding these models can be found in Aitchison and Silvey (1957), McCullagh (1980), Green (1984), McCullagh and Nelder (1989), Hosmer and Lemeshow (1989, 2000), Cox and Snell (1989), Aﬁﬁ and Clark (1990), Agresti (1990), Collett (1991), and Ananth and Kleinbaum (1997). 14.3.1 Models for Nominal Polychotomous Outcomes: Generalized Logistic Regression Models Let Y denote the outcome for individual i. The outcome can be one of the m G nominal categories, such as different cell types of lung cancer. Let Y : k denote G that Y belongs to the kth category and k : 1, 2, . . . , m. Suppose that for each G of n subjects, p independent variables x : (x , x , . . . , x ) are measured. G G G GN These variables can be either qualitative or quantitative. Let P(Y : k x ) be G G the probability that Y : k given the p measured covariates x ; then G G K P(Y : k x ) : 1. Without loss of generality, using the last catalog as the I G G reference, the generalized logistic regression model log

P(Y : k x ) N G G :a ; b x I IH GH P(Y : m x ) G G H

k : 1, 2, . . . , m 9 1

(14.3.1)

can be used to study the association of the covariates x to the outcome. To simplify the notation, let u : a ; N b x . Similar to (14.2.1) and (14.2.2), H IH GH IG I the model in (14.3.1) assumes that the dependence on the covariates of the probability of being in the kth category is

exp(u ) IG k : 1, 2, . . . , m 9 1 1 ; K\ exp(u ) H HG (14.3.2) P(Y : k x ) : G G 1 k:m 1 ; K\ exp(u ) H HG This model reduces to the logistic regression model in (14.2.1) and (14.2.2) when m : 2. Let k , . . . , k be the outcomes observed for the n subjects. Then the L log-likelihood function based on the n outcomes observed is the logarithm of the product of all P(Y : k x )’s from the n subjects, that is, G G G l(a , a , . . . , a , b , b ,...,b ) : log L : log K\ K\

L P(Y : k x ) G G G G

(14.3.3)

where P(Y : k x ) is given in (14.3.2) and b : (b , . . . , b ), k : 1, G G G I I IN 2, . . . , m 9 1. There are a total of (m 9 1)(p ; 1) unknown coefﬁcients. The estimation and hypothesis testing procedures for the coefﬁcients are similar to

   

415

those in the logistic regression model for dichotomous outcomes. Strictly speaking, the models in (14.3.1) are not logistic regression models if m 2. Therefore, the interpretation of the coefﬁcients in these models needs to be clariﬁed. Let us consider modeling the relationship between gender and cardiovascular disease status, NORMAL, STROKE, and CHD (coronary heart disease). Let the outcome variable Y be deﬁned as Y : 1 if CHD, :2 if STROKE, and :3 if NORMAL, and the covariate SEX deﬁned as SEX : 1 if male and :0 if female. Then the two models according to (14.3.1) are P(Y : 1 SEX ) G G : a ; b · SEX G P(Y : 3 SEX ) G G P(Y : 2 SEX ) G G : a ; b · SEX log G P(Y : 3 SEX ) G G

log

It is clear that neither of them is a logistic regression model. In the following, we show how to interpret the coefﬁcients b and b in these models. From the ﬁrst model, log

P(Y : 1 SEX : 1)/P(Y : 3 SEX : 1) P(Y : 1 SEX : 0)/P(Y : 3 SEX : 0) : log

P(Y : 1 SEX : 1) P(Y : 1 SEX : 0) 9 log P(Y : 3 SEX : 1) P(Y : 3 SEX : 0)

: (a ; b ) 9 a :b and thus P(Y : 1 SEX : 1)/P(Y : 3 SEX : 1) : exp(b ) P(Y : 1 SEX : 0)/P(Y : 3 SEX : 0)

(14.3.4)

Now let us cast the data into a 3;2 contingency table as in Table 14.16. The left side of (14.3.4) can be estimated by fa ( f /n )/(b/n ) : (e/n )/(a/n ) be However, if only the data from the normal and CHD participants are used, f a [ f /(b ; f )]/[b/(b ; f )] : be [e/(e ; a)]/[a/(e ; a)]

416         Table 14.16 Nominal Cross-Classiﬁcation of Cardiovascular (CVD) Status by Gender SEX CVD Status (Y) NORMAL (3) STROKE (2) CHD (1) Total

Female (0)

Male (1)

a c e — n

b d f — n

which is an estimate of P(CHD Male)/[1 9 P(CHD male)] P(CHD female)/[1 9 P(CHD female)] or the ratio of the odds of a male having CHD to the odds of a female having CHD. Therefore, the exp(b ) obtained from the ﬁrst model can be interpreted as an estimate of the ratio of the odds of a male having CHD to the odds of a female having CHD if only the data from the normal and CHD participants are used. Similarly, exp(b ) obtained from the second model can be interpreted as an estimate of the ratio of the odds of a male having STROKE to the odds of a female having STROKE if only the data from the normal and STROKE participants are used. The same interpretation also holds for coefﬁcients of continuous covariates in the models of (14.3.1); that is, an exponentiated coefﬁcient for a continuous covariate is the odds ratio of a 1-unit increase in the covariate assuming that other covariates are the same. Example 14.11 We use the data in Example 14.9 and assume that DM (Y : 1), IFG (Y : 2), and NFG (Y : 3) are three nominal categories. Let the referent category be NFG. For simplicity, only two covariates, systolic blood pressure (SBP) and log insulin (LINSUL), are included. Table 14.17 gives the results from ﬁtting these covariates to the model (14.3.1). P(i th participant is DM) P(Y : 1 x ) G G : log P(Y : 3 x ) P(i th participant is NFG) G G : 97.648 ; 0.026SBP ; 1.047LINSUL G G P(i th participant is IFG) P(Y : 2 x ) G G log : log P(i th participant is NFG) P(Y : 3 x ) G G : 94.949 ; 0.011SBP ; 0.876LINSUL G G

log

417

k

Variable

Regression Coefﬁcient

Standard Error

Chi-Square Statistic p

Odds Ratio Lower

Upper

DM vs. NFG b 1 INTERCP 97.648 1.648 21.530 0.0001 b 1 SBP 0.026 0.010 6.300 0.0121 1.03 1.01 1.05 b 1 LINSUL 1.047 0.304 11.870 00006 2.85 1.57 5.17 ---------------------------------------------------------------------------------------------------------IFG vs. NFG b 2 INTERCP 94.949 1.427 12.020 00005 b 2 SBP 0.011 0.010 1.410 0.2346 1.01 0.99 1.03 b 2 LINSUL 0.876 0.262 11.150 0.0008 2.40 1.44 4.01 ---------------------------------------------------------------------------------------------------------DM vs. IFG INTERCP 92.699 1.850 2.130 0.1445 SBP 0.015 0.012 0.480 0.2239 1.02 0.99 1.04 LINSUL 0.171 0.333 1.270 0.6066 1.19 0.62 2.28 ---------------------------------------------------------------------------------------------------------H :b :b 1.48 0.2239 H :b :b 0.27 0.6066

Order of Coefﬁcients by SAS

95% Conﬁdence Interval for Odds Ratio

Table 14.17 Asymptotic Partial Likelihood Inference from the Generalized Logistic Regression Model for Example 14.11

418         Consequently, log

P(i th participant is DM) P(Y : 1 x ) G G : log P(i th participant is IFG) P(Y : 2 x ) G G P(Y : 1 x ) P(Y : 2 x ) G G 9 log G G : log P(Y : 3 x ) P(Y : 3 x ) G G G G : (97.648 ; 4.949) ; (0.026 9 0.011)SBP G ; (1.047 9 0.876)LINSUL G : 92.699 ; 0.015SBP ; 0.171LINSUL G G

Thus, the odds ratio is 1.03 [exp(0.026)] times (or 3% higher) for a 1-unit increase in SBP, and 2.85 [exp(1.047)] times (or 185% higher) for a 1-unit increase in LINSUL from the model for DM vs. NFG. The odds ratio is 2.40 [exp(0.876)] times (or 140% higher) for a 1-unit increase in LINSUL from the model for IFG versus NFG. SBP is not signiﬁcant in the model for IFG versus NFG (p : 0.2346). Neither SBP nor LINSUL is signiﬁcant in the model for DM versus IFG (p : 0.2239 and p : 0.6066, respectively). One can also follow the examples in Chapter 7, 9, 11, and 12 to perform additional statistical inferences. For instance, we can test whether the coefﬁcients for SBP in the ﬁrst two models are equal (whether the odds ratio for a 1-unit increase of SBP in the model for DM versus NFG is equal to that in the model for IFG versus NFG), that is, H : b 9 b : 0 (where the subscripts 3 and 4 are the orders of the coefﬁcients given by SAS). From (11.2.13), under H , Wald’s statistic, X : (b 9 b )/(v ; v 9 2v ), has an asymptotic chi-square distribution 5 with 1 degree of freedom, where v and v are the estimated variance of b and b , respectively, and v is the estimated covariance of b and b . From Table 14.17, the hypothesis is not rejected (p : 0.2239). Similarly, the hypothesis H : b 9 b : 0 is not rejected (p : 0.6066); that is, there is insufﬁcient evidence to say that the change in odds ratio for a 1-unit increase in LINSUL in the model for DM versus NFG is not equal to that in the model for IFG versus NFG. The following SAS, SPSS, and BMDP codes can be used to obtain the results in Table 14.17. SAS code: data w1; inﬁle ‘c:ex14d2d6.dat’ missover; input age ageg sex sbp dbp lacr hdl linsul smoke dms dm sn; y : 4-dms; run; title ‘‘Generalized logistic regression model’’; proc catmod data : w1; direct sbp linsul;

   

419

model y : sbp linsul / ml covb; contrast ‘Equal coefﬁcients for SBP’ all — parms 0 0 1 91 0 0; contrast ‘Equal coefﬁcients for LINSUL’ all — parms 0 0 0 0 1 91; run;

SPSS code: data list ﬁle : ‘c:ex14d2d6.dat’ free / age ageg sex sbp dbp lacr hdl linsul smoke dms dm sn. Compute y : 4-dms. nomreg y with sbp linsul /print : ﬁt history parameter lrt.

BMDP PR code: ﬁle : ‘c:ex14d2d6.dat’ . variables : 12. format : free. /variable names : age, ageg, sex, sbp, dbp, lacr, hdl, linsul, smoke, dms, dm, sn. Use : age, sex to smoke. /transform y : 4-dms. /group codes(y) : 1, 2, 3. Names(y) : DM, IFG, NFG. /regress depend : y. Level : 3. Type : nom. Interval : age, sex to smoke. enter : .05, .05. remove : : .05, .05. /print cell : model. /end

/input

14.3.2 Model for Ordinal Polychotomous Outcomes: Ordinal Regression Models If the outcomes involve a rank ordering, that is, the outcome variable is ordinal, several multivalued regression models are available. Readers interested in these models are referred to McCullagh and Nelder (1989), Agresti (1990), Ananth and Kleinbaum (1997), and Hosmer and Lemeshow (2000). In the following discussion, we introduce the most frequently used model, the proportional odds model. In this model, the probability of an outcome below or equal to a given ordinal level, P(Y k), is compared to the probability that it is higher than the level given, P(Y k). Let Y be the outcome of the ith subject. Assume that Y can be classiﬁed into G G m ordinal levels. Let Y : k if Y is classiﬁed into the kth level and G G

420         k : 1, 2, . . . , m. Suppose that for each of n subjects, p independent variables x : (x , x , . . . , x ) are measured. These variables can be either qualitative G G G GN or quantitative. If the logit link function deﬁned in Section 14.2.3 is used, similar to the logistic regression model (14.2.3), we consider the following models: P(Y k x ) N G G :a ; b x logit(P(Y k x )) : log G G I H GH 1 9 P(Y k x ) G G H k : 1, 2, . . . , m 9 1

(14.3.5)

or, equivalently, let u : a ; N b x , H H GH IG I exp(u ) exp(a ; N b x ) H H GH : IG I P(Y k x ) : G G 1 ; exp(a ; N b x ) 1 ; exp(u ) H H GH IG I k : 1, 2, . . . , m 9 1

(14.3.6)

Therefore, P(Y : k x ) : P(Y k x ) 9 P(Y k 9 1 x ) G G G G G G exp(u ) G k:1 1 ; exp(u ) G exp(u ) exp(u ) IG I\G : 9 k : 2, . . . , m 9 1 (14.3.7) 1 ; exp(u ) 1 ; exp(u ) IG I\G exp(u ) K\G 19 k:m 1 ; exp(u ) K\G If m : 2, that is, there are only two outcome levels, (14.3.7) reduces to the logistic regression model in (14.2.3). The models in (14.3.5) can be thought of as having only two outcomes [(Y k) versus (Y k)] and therefore are logistic regression models. Thus, interpretation of the coefﬁcients, b , such as H the exponentiated coefﬁcient [exp(b )] for a discrete or a continuous covariate H is similar to that in a logistic regression model. Let k , . . . , k be observed outcomes from n subjects. Then the log-likelihood L function based on the n outcomes observed is the logarithm of the product of all P(Y : k x )’s from the n subjects, that is, G G G

L l(a , a , . . . , a , b , b , . . . , b ) : log L : log P(Y : k x ) G G G K\ N G

(14.3.8)

where P(Y : k x ) is as given in (14.3.7). The maximum likelihood estimation G G G and hypothesis-testing procedures for the coefﬁcients are similar to those discussed previously. If the probit link function in (14.2.27) is used, the models

   

421

and formula corresponding to (14.3.5)—(14.3.7) are N \(P(Y k x )) : a ; b x k : 1, 2, . . . , m 9 1 G G I H GH H P(Y k x ) : (u ) k : 1, 2, . . . , m 9 1 G G IG P(Y : k x ) : P(Y k x ) 9 P(Y k 9 1 x ) G G G G G G (u ) k:1 G : (u ) 9 (u ) k : 2, . . . , m 9 1 IG I\G 1 9 (u ) k:m K\G

If the complementary log-log link function in (14.2.29) is used, the models and formula corresponding to (14.3.5)—(14.3.7) are N log[9log(1 9 P(Y k x ))] : a ; b x k : 1, 2, . . . , m 9 1 G G I H GH H P(Y k x ) : 1 9 exp[9exp(u )] k : 1, 2, . . . , m 9 1 G G IG P(Y : k x ) : P(Y k x ) 9 P(Y k 9 1 x ) G G G G G G 1 9 exp[9exp(u )] k:1 G )] 9 exp[9exp(u )] k : 2, . . . , m 9 1 : exp[9exp(u I\G IG exp[9exp(u )] k:m K\G

The log-likelihood function based on these two models can be obtained by replacing P(Y : k x ) in (14.3.8) with the respective expressions above. G G G Example 14.12 Now consider the NFG, IFG, and DM categories in Example 14.9 that represent three levels of severity in glucose intolerance. DM (diabetes) is deﬁned as fasting plasma glucose (FPG) 126 mg/dL, IFG (impaired fasting glucose) as FPG between 110 and 125 mg/dL, and NFG (normal fasting glucose) as FPG 110 mg/dL. Thus, it is reasonable to consider the outcome variable as ordinal. Let the outcome variable Y : 1 if DM, 2 if IFG, and 3 if NFG. We ﬁt the models in (14.3.5) using the SAS procedure LOGISTIC with all the covariates. The SAS program allows users to use a variable selection method (forward, backward, and stepwise). In this case, we use the stepwise selection method, and the results are given in the ﬁrst part of Table 14.18. The stepwise method identiﬁes SBP and LINSUL as signiﬁcant independent variables. For k : 1 [i.e., we compare diabetes with

422

INTERCP1 INTERCP2 SBP LINSUL

1 2

96.753 95.485 0.019 0.925

Regression Coefﬁcient

1.183 1.151 0.007 0.213

INTERCP1 INTERCP2 SBP LINSUL

93.971 93.240 0.011 0.530 0.677 0.664 0.004 0.123

INTERCP1 INTERCP2 SBP LINSUL

95.626 94.562 0.014 0.715

26.831

32.571 22.708 6.114 18.803 0.0001

0.0001 0.0001 0.0134 0.0001

26.261

34.415 23.790 6.311 18.674 0.0001

0.0001 0.0001 0.0120 0.0001

1.02 2.52

Odds Ratio

0.915 0.894 0.006 0.162

?b and b are coefﬁcients for SBP and LINSUL, respectively.

25.835

37.813 26.025 5.721 19.534

0.0001

0.0001 0.0001 0.0168 0.0001

Model from Complementary Log-Log Link Function

Log-likelihood ratio statistic for H : b : b : 0

1 2

p

Model with Inverse Normal Link Function

Log-likelihood ratio statistic for H : b : b : 0

1 2

Chi-Square Statistic

Model with Logit Link Function

Standard Error

Log-likelihood ratio statistic for H : b : b : 0?

Variable

k

1.00 1.67

Lower

1.03 3.90

Upper

95% Conﬁdence Interval for Odds Ratio

Table 14.18 Asymptotic Partial Likelihood Inference from the Ordinal Regression Model with Different Link Functions for the Diabetic Status Data in Example 14.9

   

423

nondiabetes (NFG ; IFG)] the estimated model in (14.3.5) is log

P(participant i is diabetic) P(Y 1 x ) G G : log 1 9 P(Y 1 x ) P(participant i is nondiabetic) G G : 96.753 ; 0.019SBP ; 0.925LINSUL G G

For k : 2, the estimated model in (14.3.5) is log

P(Y 2 x ) P(participant i is either DM or IFG) G G : log 1 9 P(Y 2 x ) P(participant i is NFG) G G : 95.485 ; 0.019SBP ; 0.925LINSUL G G

According to (14.3.7), we can estimate the probability of developing DM, IFG, or remaining NFG. For example, the probability of developing IFG is

P(Y : 2 x ) : P(participant i is IFG) G G exp(95.485 ; 0.019SBP ; 0.925LINSUL ) G G : 1 ; exp(95.485 ; 0.019SBP ; 0.925LINSUL ) G G exp(96.753 ; 0.019SBP ; 0.925LINSUL ) G G 9 1 ; exp(96.753 ; 0.019SBP ; 0.925LINSUL ) G G Thus, for a person whose systolic blood pressure is 140 mmHg and whose log insulin is 3, the probability of developing IFG can be obtained by plugging these values into the preceding equation. The result is P(participant is IFG) :

0.951 0.268 9 1 ; 0.951 1 ; 0.268

: 0.276 As noted earlier, the coefﬁcients in these models can be interpreted as those in the ordinary logistic regression model for binary outcomes. In this example, the higher SBP and LINSUL are, the higher the odds of having DM than of not having DM, or the higher the odds of having either DM or IFG than of being NFG. The odds ratio is 1.02 [exp(0.019)] times (or 2% higher) for a 1-unit increase in SBP assuming that LINSUL is the same, and 2.52 times (or 152% higher) for a 1-unit increase in LINSUL assuming that SBP is the same. From the table, SBP and LINSUL are related signiﬁcantly to the diabetic status in all models with different link functions. SAS and SPSS can also be used for the other two link functions: the inverse of the cumulative standard normal distribution and the complementary log-log

424         link functions introduced in Section 14.2.3. Table 14.18 includes the results from models with these two link functions. The results are very similar to those obtained using the logit link function. The following SAS, SPSS, and BMDP codes can be used to obtain the results in Table 14.18. SAS code: data w1; inﬁle ‘c:ex14d2d6.dat’ missover; input age ageg sex sbp dbp lacr hdl linsul smoke dms dm sn; run; title ‘‘Ordinal regression model with logic link function’’; proc logistic data : w1 descending; model dms : age sex sbp dbp lacr hdl linsul smoke / selection : s lackﬁt link : logit; run; title ‘‘Ordinal regression model with inverse normal link function‘; proc logistic data : w1 descending; model dms : age sex sbp dbp lacr hdl linsul smoke / selection : s lackﬁt link : probit; run; title ‘‘Ordinal regression model with complementary log-log link function’’; proc logistic data : w1 descending; model dms : age sex sbp dbp lacr hdl linsul smoke / selection : s lackﬁt link : cloglog; run;

SPSS code: data list ﬁle : ‘c:ex14d2d6.dat’ free / age ageg sex sbp dbp lacr hdl linsul smoke dms dm sn. Compute y : 4-dms. plum y with sbp linsul /link : logit /print : ﬁt history parameter. plum y with sbp linsul /link : probit /print : ﬁt history parameter. plum y with sbp linsul /link : cloglog /print : ﬁt history parameter.

BMDP PR code for the logit link function only: /input

ﬁle : ‘c:ex14d2d6.dat’ . variables : 12. format : free.



425

names : age, ageg, sex, sbp, dbp, lacr, hdl, linsul, smoke, dms, dm, sn. Use : age, sex to smoke. /transform y : 4-dms. /group codes(y) : 1, 2, 3. Names(y) : DM, IFG, NFG. /regress depend : y. Level : 3. Type : ord. Interval : age, sex to smoke. enter : .05, .05. remove : : .05, .05. /print cell : used. /end /variable

Note that the model for ordinal polychotomous outcomes in BMDP PR is deﬁned as log

P(Y k x ) N G G : ; x : u I H GH IG 1 9 P(Y k x ) H G G

k : 1, 2, . . . , m 9 1

Compared with (14.3.5), : 9a , k : 1, 2, . . . , m 9 1; : 9b , j : 1, I I H H 2, . . . , p. Bibliographical Remarks The linear logistic regression method is discussed extensively in Cox (1970), Cox and Snell (1989), Collett (1991), Kleinbaum (1994), and Hosmer and Lemeshow (2000). Cox’s book provides the theoretical background, and Hosmer and Lemeshow discuss broad application of the method, including model-building strategies and interpretation and presentation of analysis results. In addition to the papers and books cited in this chapter, other works on the subject include Anderson (1972), Mantel (1973), Prentice (1976), Prentice and Pyke (1979), Holford et al. (1978), and Breslow and Day (1980). Applications of the logistic regression model can easily be found in various biomedical journals.

EXERCISES 14.1

Consider the study presented in Example 3.5 and the data for the 40 patients in Table 3.10. (a) Construct a summary table similar to Table 3.11. (b) Construct a table similar to Table 3.12. (c) Use the chi-square test to detect any differences in retinopathy rates among the subgroups obtained in part (b).

426         (d) On the basis of these 40 patients, identify the most important risk factors using a linear logistic regression method. 14.2

Consider the data for the 33 hypernephroma patients given in Exercise Table 3.1. Let ‘‘response’’ be deﬁned as stable, partial response, or complete response. (a) Compare each of the ﬁve skin test results of the responders with those of the nonresponders. (b) Use a linear logistic regression method to identify the most important risk factors related to response. (i) Consider the ﬁve skin tests only. (ii) Consider age, gender, and the ﬁve skin tests.

14.3

Consider all nine risk variables (age, gender, family history of melanoma, and six skin tests) in Exercise 3.3 and Exercise Table 3.3. Identify the most important prognostic factors that are related to remission. Use both univariate and multivariate methods.

14.4

Consider the data of 58 hypernephroma patients given in Exercise Table 3.2. Apply the logistic regression method to response (deﬁned as complete response, partial response, or stable disease). Include gender, age, nephrectomy treatment, lung metastasis, and bone metastasis as independent variables. (a) Identify the most signiﬁcant independent variables. (b) Obtain estimates of odds ratios and conﬁdence intervals when applicable.

14.5

Consider the case where there is one continuous independent variable X . Show that the log odds ratio for X : x ; m versus X : x is mb , where b is the logistic regression coefﬁcient.

14.6

Using the data in Table 12.4, deﬁne the index function CVD as CVD : 1 if dg 1, and CVD : 0 otherwise, and ﬁt a logistic regression model for CVD by using the stepwise selection method to select risk factors among the same factors as those noted at the bottom of Table 12.7. Compare the results obtained with those in Table 12.7.

14.7

Assuming that P(a person is sampled y, x) : P(a person is sampled y), that is, the sampling probability is independent of the risk factors x, derive (14.2.15).

14.8

By using (14.2.14) and (14.2.1), show that (14.2.20) reduces to (14.2.21).

14.9

Derive (14.3.2).



427

14.10 Consider the data in Table 12.4. Fit the generalized logistic regression model in (14.3.1) for DG with covariates AGE, SEX, LACR, and LTG by using the SAS CATMOD, SPSS NOMREG, or BMDP PR procedure. Select risk factors among those noted at the bottom of Table 12.7 using the stepwise selection method in the BMDP PR procedure. Compare the results with those given in Table 13.5. 14.11 Using the same notation and data as in Table 14.11, (1) ﬁt the outcome variable Y with the generalized logistic regression model in (14.3.1) with SEX as the covariate; (2) ﬁt a logistic regression for the binary outcome DM versus NFG, with SEX as the covariate, by using the data from DM and NFG participants only; (3) ﬁt a logistic regression for the binary outcome IFG versus NFG, with SEX as the covariate, by using the data from IFG and NFG participants only; (4) compare the coefﬁcients obtained from (2) and (3) with the coefﬁcients obtained from (1), and (5) report what you have found. 14.12 Perform the same analyses as in Exercise 14.11 but use SBP as the covariate, and discuss your ﬁndings.

Statistical Methods for Survival Data Analysis. Elisa T. Lee and John Wenyu Wang Copyright ¶ 2003 John Wiley & Sons, Inc. ISBN: 0-471-36999-7

APPENDIX A

Newton--Raphson Method

The Newton—Raphson method (Ralston and Wilf, 1967; Carnahan et al., 1969) is a numerical iterative procedure that can be used to solve nonlinear equations. An iterative procedure is a technique of successive approximations, and each approximation is called an iteration. If the successive approximations approach the solution very closely, we say that the iterations converge. The maximum likelihood estimates of various parameters and coefﬁcients discussed in Chapters 7, 9, and 11 to 14 can be obtained by using the Newton—Raphson method. In this appendix we discuss and illustrate the use of this method, ﬁrst considering a single nonlinear equation and then a set of nonlinear equations. Let f (x) : 0 be the equation to be solved for x. The Newton—Raphson method requires an initial estimate of x, say x , such that f (x ) is close to zero preferably, and then the ﬁrst approximate iteration is given by f (x ) x : x 9 f (x )

(A.1)

where f (x ) is the ﬁrst derivative of f (x) evaluated at x : x . In general, the (k ; 1)th iteration or approximation is given by f (x ) I x : x 9 I> I f (x ) I

(A.2)

where f (x ) is the ﬁrst derivative of f (x) evaluated at x : x . The iteration I I terminates at the kth iteration if f (x ) is close enough to zero or the difference I between x and x is negligible. The stopping rule is rather subjective. I I\ Acceptable rules are that f (x ) or d : x 9 x is in the neighborhood of I I I\ 10\ or 10\. Example A.1 Consider the function f (x) : x 9 x ; 2 428

- 

429

Figure A.1 Graphical presentation of the Newton—Raphson method for Example A.1.

We wish to ﬁnd the value of x such that f (x) : 0 by the Newton—Raphson method. The ﬁrst derivative of f (x) is f (x) : 3x 9 1 Since f (91) : 2 and f (92) : 94, graphically (Figure A.1), we see that the curve cuts through the x axis [ f (x) : 0] between 91 and 92. This gives us a good hint of an initial value of x. Suppose that we begin with x : 91; f (x ) : 2 and f (x ) : 2. Thus, the ﬁrst iteration, following (A.1), gives 2 x : 91 9 : 92 2 and f (x ) : 94 and f (x ) : 11. Following (A.2), we obtain the following: Second iteration: 4 x : 92 ; : 91.6364 11 f (x ) : 90.7456

f (x ) : 7.0334

- 

430 Third iteration:

0.7456 x : 91.6364 ; : 91.5304 7.0334 f (x ) : 90.054

f (x ) : 6.0264

Fourth iteration: 0.054 x : 91.5304 ; : 91.52144 6.0264 f (x ) : 90.00036

f (x ) : 5.9443

Fifth iteration: 0.00036 : 91.52138 x : 91.52144 ; 5.9443 f (x ) : 0.0000017 At the ﬁfth iteration, for x : 91.52138, f (x) is very close to zero. If the stopping rule is that f (x) - 10\, the iterative procedure would terminate after the ﬁfth iteration and x : 91.52138 is the root of the equation x 9 x ; 2 : 0. Figure A.1 gives the graphical presentation of f (x) and the iteration. It should be noted that the Newton—Raphson method can only ﬁnd the real roots of an equation. The equation x 9 x ; 2 : 0 has only one real root, as shown in Figure A.1; the other two are complex roots. The Newton—Raphson method can be extended to solve a system of equations with more than one unknown. Suppose that we wish to ﬁnd values of x , x , . . . , x such that N f (x , . . . , x ) : 0 N f (x , . . . , x ) : 0 N $ f (x , . . . , x ) : 0 N N Let a be the partial derivative of f with respect to x ; that is, a : * f /*x . GH G H GH G H

- 

431

The matrix a % a N a % a N J : $ $ a N

%

a NN

is called the Jacobian matrix. Let the inverse of J, denoted by J\, be b % b N b % b N J\ : $ $ b N

%

b NN

Let xI , xI , . . . , xI be the approximate root at the kth iteration; let f I , . . . , f I N N be the corresponding values of the functions f , . . . , f , that is, N f I : f (x I , . . . , xI ) N $ f I : f (x I , . . . , xI ) N N N and let bI be the ijth element of J\ evaluated at xI , . . . , xI . Then the next GH N approximation is given by xI> : xI 9 (b I f I ; bI f I ; % ; bI f I ) N N xI> : xI 9 (b I f I ; bI f I ; % ; bI f I ) N N $

(A.3)

xI> : xI 9 (b I f I ; bI f I ; % ; bI f I ) N N N N NN N The iterative procedure begins with a preselected initial approximate x, x, . . . , x, proceeds following (A.3), and terminates either when f , f , . . . , f N N are close enough to zero or when differences in the x values at two consecutive iterations are negligible. Example A.2 Suppose that we wish to ﬁnd the value of x and x such that x ; x x 9 2x 9 1 : 0

x 9 x ; x 9 2 : 0

- 

432 In this case, p : 2: f : x ; x x 9 2x 9 1

f : x 9 x ; x 9 2

Since * f /*x :2x ;x 9 2, * f /*x :x , * f /*x :3x91, and * f /*x : 1, the Jacobian matrix is J:

2x ; x 9 2 x 3x 9 1 1

(A.4)

Let the initial estimates be x : 0, x : 1, f : 91, and f : 91: J:

91 0 91 1

J\ :

91 0 91 1

Iteration 1. Following (A.3), we obtain x : 0 9 [(91)(91) ; 0(91)] : 91

x : 1 9 [(91)(91) ; 1(91)] : 1

With these values, f : 1, f : 91, and J:

93 91 2 1

J\ :

91 91 2 3

Iteration 2. From (A.3) we obtain x : 91 9 [(91)(1) ; (91)(91)] : 91

x : 1 9 [(2)(1) ; (3)(91)] : 2

With these values, f : 0 and f : 0. Therefore, the iteration procedure terminates and the solution of the two simultaneous equations is x : 91, x : 2. The number of iterations required depends strongly on the initial values chosen. In Example A.2, if we use x : 0, x : 0, it requires about 11 iterations to ﬁnd the solution. Interested readers may try it as an exercise.

Statistical Methods for Survival Data Analysis. Elisa T. Lee and John Wenyu Wang Copyright ¶ 2003 John Wiley & Sons, Inc. ISBN: 0-471-36999-7

APPENDIX B

Statistical Tables

433

Table B-1 Normal Curve Areas

Source: Abridged from Table 1 of Statistical Tables and Formulas, by A. Hald, John Wiley & Sons, 1952. Reproduced by permission of John Wiley & Sons.

434

Table B-2 Percentage Points of the 2-Distribution

Source: ‘‘Tables of the Percentage Points of the -Distribution,’’ by Catherine M. Thompson, Biometrika, Vol. 32, pp. 188—189 (1941). Reproduced by permission of the editor of Biometrika.

435

436

Table B-3 5% Points of the F-Distribution

437

438 Table B-3 2.5% Points of the F-Distribution

439

440 Table B-3 1% Points of the F-Distribution

441

442 Table B-3 0.5% Points of the F-Distribution

443

Source: ‘‘Tables of Percentage Points of the Inverted Beta (F) Distribution,’’ by Maxine Merrington and Catherine M. Thompson, Biometrika, Vol. 33, pp. 73—88 (1943). Reproduced by permission of the editor of Biometrika.

Table B-4 Upper Tail Probabilities for the Null Distribution of the Kruskal--Wallis H Statistic: k : 3, n1 : 1(1)5, n2 : n1(1)5, 2 n3 : n2(1)5

444

Table B-4 (continued)

445

Table B-4 (continued)

446

Table B-4 (continued)

447

Table B-4 (continued)

448

Table B-4 (continued)

449

Table B-4 (continued)

450

Table B-4 (continued)

451

Table B-4 (continued)

452

Table B-4 (continued)

453

Table B-4 (continued)

454

Table B-4 (continued)

455

Table B-4 (continued)

456

Table B-4 (continued)

457

Table B-4 (continued)

Source: Table F of A Nonparametric Introduction to Statistics, by C. H. Kraft and C van Eedan, Macmillan, New York, 1968. Reproduced by permission of the Macmillan Publishing Company.

458

Table B-5 Selected Critical Values for All Treatments: Multiple Comparisons Based on Kruskal--Wallis Rank Sums

Source: ‘‘Rank Sum Multiple Comparisons in One- and Two-Way Classiﬁcation,’’ by B. J. McDonald and W. A. Thompson, Biometrika, Vol. 54, pp. 487—497 (1967). Reproduced by permission of the editor of Biometrika. The starred values are from ‘‘Distribution-Free Multiple Comparisons,’’ Ph.D. thesis (1963), P. Nemenyi, Princeton University, with permission of the author. 459

Table B-6 Selected Critical Values for the Range of k Independent N(0, 1) Variables: k : 2(1)20(2)40(10)100 For a given k and , the tabled entry is q(, k, -).

Source: ‘‘Table of Range and Studentized Range,’’ by H. L. Harter, Ann. Math. Statist., Vol. 31, pp. 1122—1147 (1960). Reproduced by permission of the editor of the Annals of Mathematical Statistics.

460

Table B-7 Percentage Points of the t-Distribution

Source: ‘‘Table of Percentage Points of the t-Distribution,’’ by Maxine Merrington, Biometrika, Vol. 32, p. 300 (1941). Reproduced by permission of the editor of Biometrika.

461

Table B-8 Coefﬁcients (ai and bi) of the Best Estimates of the Mean () and Standard Deviation () in Censored Samples Up to n : 20 from A Normal Population

462

Table B-8 (continued)

463

Table B-8 (continued)

464

465

Table B-8 (continued )

466 Table B-8 (continued )

467

468 Table B-8 (continued )

469

470 Table B-8 (continued )

471

472

Source: ‘‘Estimation of Location and Scale Parameters by Order Statistics from Singly and Doubly Censored Samples, Parts I and II,’’ by A. E. Sarhan and B. G. Greenberg, Ann. Math. Statist., Vol. 27, pp. 427—451 (1956). Reproduced by permission of the editor of the Annals of Mathematical Statistics.

Table B-8 (continued )

473

Table B-9 Variances and Covariances of the Best Linear Estimates of the Mean ( ) and Standard Deviation ( ) for Censored Samples Up to Size 20 from a Normal Population

474

Source: Up to n : 15 of this table is reproduced from A. E. Sarhan and B. G. Greenberg, ‘‘Estimation of Location and Scale Parameters by Order Statistics from Singly and Censored Samples, Parts I and II,’’ Ann. Math. Statist., Vol. 27, pp. 427—451 (1956), and Vol. 29, pp. 79—105 (1958), with permission of the editor of the Annals of Mathematical Statistics. The rest of the table is produced from A. E. Sarhan and B. G. Greenberg, ‘‘Estimation of Location and Scale Parameters by Order Statistics from Singly and Doubly Censored Samples, Part III,’’ Tech. Rep. 4-OOR, Project 1597, U.S. Army Research Ofﬁce.

Table B-9 (continued )

Table B-10 1/(1 9 R) and for the Estimation of the Parameters of the Gamma Distribution When There Are No Censored Observations

Source: ‘‘Estimation of Parameters of the Gamma Distribution Using Order Statistics,’’ by M. B. Wilk, R. Gnanadesikan, and Marilyn J. Huyett, Biometrika, Vol. 49, pp. 525—545 (1962). Reproduced by permission of the editor of Biometrika.

475

Table B-11 (P, S) and (P, S) for Various Values of n/r: n/r : 1.0

For P 0.52 read S from the left-hand margin, and for P 0.56 read S from the right-hand margin. Note that the ﬁgures in region 2 are printed in bold roman type and those in region 3 in bold italic type; the remainder of the table (outside of regions 2 and 3) is region 1.

476

Table B-11 (continued)

477

Table B-11 (continued)

478

Table B-11 (continued)

479

Table B-11 (continued)

480

Table B-11 (continued)

481

Table B-11 (continued)

482

Table B-11 (continued)

483

Table B-11 (continued)

484

Table B-11 (continued)

Source: ‘‘Estimation of Parameters of the Gamma Distribution Using Order Statistics,’’ by M. B. Wilk, R. Gnanadesikan, and Marilyn J. Huyett, Biometrika, Vol. 49, pp. 525—545 (1962). Reproduced by permission of the editor of Biometrika.

485

Table B-12 Percentage Points l Such That P( 1/ 2 l) : 1 9

Source: ‘‘Two Sample Test in the Weibull Distribution,’’ by D. R. Thoman and L. J. Bain, Technometrics, Vol. 11, pp. 805—815 (1969). Reproduced by permission of the editor of Technometrics.

486

Table B-13 Percentage Points z Such That P(G z) : 1 9

Source: ‘‘Two Sample Test in the Weibull Distribution,’’ by D. R. Thoman and L. J. Bain, Technometrics, Vol. 11, pp. 805—815 (1969). Reproduced by permission of the editor of Technometrics.

487

Statistical Methods for Survival Data Analysis. Elisa T. Lee and John Wenyu Wang Copyright ¶ 2003 John Wiley & Sons, Inc. ISBN: 0-471-36999-7

References

Aaronson, K. D., Schwartz, J. S., Chen, T. M., Wong, K. L., Goin, J. E, and Mancini,D. M. (1997). Development and Prospective Validation of a Clinical Index to Predict Survival in Ambulatory Patients Referred for Cardiac Transplant Evaluation. Circulation, 95, 2660—2667. Abramowitz, M., and Stegun, I. A. (1964). Handbook of Mathematical Functions with Formulas, Graphs, and Mathematical Tables. Applied Mathematics Series 55. National Bureau of Standards, Washington, DC. Aﬁﬁ, A. A., and Clark, V. (1990). Computer-Aided Multivariate Analysis, 2nd ed. Lifetime Learning Publications, Belmont, CA. Agresti, A. (1990). Categorical Data Analysis. Wiley, New York. Aitchison, J. (1970). Statistical Problems of Treatment Allocation. Journal of the Royal Statistical Society, Series A, 133, 206—238 Aitchison, J., and Brown, J. A. C. (1957). The Lognormal Distribution. Cambridge University Press, Cambridge. Aitchison, J., and Silvey, S. D. (1957). The Generalization of Probit Analysis to the Case of Multiple Responses. Biometrika, 44, 131—140. Aitkin, M., Laird, N., and Francis, B. (1983). A Reanalysis of the Stanford Heart Transplant Data (with discussion). Journal of the American Statistical Association, 78, 264—292. Akaike, H. (1969). Fitting Autoregressive Models for Prediction. Annals of the Institute of Statistical Mathematics, 21, 243—247. Akaike, H. (1974). A New Look at the Statistical Model Identiﬁcation. IEEE Transactions on Automatic Control, AC-19, 716—723. Albert, I. J. (2000). The Use of Frailty Models in Genetic Studies: Application to the Relationship between End-Stage Renal Failure and Mutation Type in Alport Syndrome. European Community Alport Syndrome Concerted Action Group (ECASCA). Journal of Epidemiology and Biostatistics, 5(3), 169—175. Albertson, P. C., Hanley, J. A., Gleason, D. F., and Barry, M. J. (1998). Competing Risk Analysis of Men Aged 55 to 74 Years at Diagnosis Managed Conservatively for Clinically Localized Prostate Cancer. Journal of the American Medical Association, 280(11), 975—980.

488



489

Alioum, A., and Commenges, D. (1996). A Proportional Hazards Model for Arbitrarily Censored and Truncated Data. Biometrics, 52, 512—524. Altshuler, B. (1970). Theory for Measurement of Competing Risks in Animal Experiments. Mathematical Biosciences, 6, 1—11. Ananth, C. V., and Kleinbaum, D. G. (1977). Regression Models for Ordinal Data: A Review of Methods and Application. International Journal of Epidemiology, 26, 1323—1333. Andersen, P. K. (1982). Testing Goodness of Fit of Cox’s Regression Model. Biometrics, 38, 67—77. Andersen, P. K. (1992). Repeated Assessment of Risk Factors in Survival Analysis. Statistical Methods in Medical Research, 1, 297—315 Andersen, P. K., Borgan, O., Gill, R. D., and Keiding, N. (1993). Statistical Models Based on Counting Processes. Springer-Verlag, New York. Andersen, P. K., and Gill, R. D. (1982). Cox’s Regression Model Counting Process: A Large Sample Study. Annals of Statistics, 10, 1100—1120 Anderson, J. A. (1972). Separate Sample Logistic Discrimination, Biometrika, 59, 19—35. Andrews, D. F., and Herzberg, A. M. (1985). Data: A Collection of Problems from Many Fields for the Student and Research Worker. Springer-Verlag, New York. ARIC Investigators. (1989). The Atherosclerosis Risk in Communities (ARIC) Study: Design and Objectives. American Journal of Epidemiology, 129, 687—702. Arjas, E. (1988). A Graphical Method for Assessing Goodness of Fit in Cox’s Proportional Hazards Model. Journal of the American Statistical Association, 83, 204—212. Armitage, P. (1959). The Comparison of Survival Curves. Journal of the Royal Statistical Society, Series A, 122, 279—300. Armitage, P. (1971). Statistical Methods in Medical Research. Blackwell Scientiﬁc Publications, Oxford. Armitage, P. (1981). Importance of Prognostic Factors in the Analysis of Data from Clinical Trials. Controlled Clinical Trials, 1, 347—353. Armitage, P., and Gehan, E. A. (1974). Statistical Methods for the Identiﬁcation and Use of Prognostic Factors. International Journal of Cancer, 13, 16—35. Asal, N. R., Geyer, J. R., Risser, D. R., Lee, E. T., Kadamani, S., and Cherng, N. (1988a). Risk Factors in Renal Cell Carcinoma, Part I. Methodology, Demographics, Tobacco, Beverage and Obesity. Cancer Detection and Prevention, 11, 359—377. Barnard, G. A. (1963). Some Aspects of the Fiducial Argument. Journal of the Royal Statistical Society, Series B, 34, 216—217. Bartholomew, D. J. (1957). A Problem in Life Testing. Journal of the American Statistical Association, 52, 350—355. Bartholomew, D. J. (1963). The Sampling Distribution of an Estimate Arising in Life Testing. Technometrics, 5, 361—374. Baumgartner, R. N., Roche, A. F., et al. (1987). Fatness and Fat Patterns: Associations with Plasma Lipids and Blood Pressure in Adults, 18 to 57 Years of Age. American Journal of Epidemiology, 126, 614—628.

490



Beale, E. M. L., Kendall, M. G., and Mann, D. W. (1976). The Discarding of Variable in Multivariate Analysis. Biometrika, 54, 357—366. Berkson, J. (1942). The Calculation of Survival Rates, in Carcinoma and Other Malignant Lesions of the Stomach, edited by W. Walters, H. K. Gray, and J. T. Priestley. W.B. Saunders, Philadelphia. Berkson, J., and Gage, R. R. (1950). Calculation of Survival Rates for Cancer. Proceedings of Staff Meetings, Mayo Clinic, 25, 250. Birnbaum, Z. W., and Saunders, S. C. (1958). A Statistical Model for Life-Length of Materials. Journal of the American Statistical Association, 53, 151—160. Blackstone, E. H., and Lytle, B. W. (2000). Competing Risks after Coronary Bypass Surgery: The Inﬂuence of Death on Reintervention. Journal of Thoracic and Cardiovascular Surgery, 119(6), 1221—1230. Bliwise, D. L., Kutner, N. G., Zhang, R., and Parker, K. P. (2002). Survival by Time of Day of Hemodialysis in an Elderly Cohort. Journal of the American Medical Association, 286(21), 2690—2694. Boag, J. W. (1949). Maximum Likelihood Estimates of Proportion of Patients Cured by Cancer Therapy. Journal of the Royal Statistical Society, Series B, 11, 15. Bolard, P., Quantin, C. P., Esteve, J., Faivre, J., and Abrahamowicz, M. (2001). Modeling Time-Dependent Hazard Ratios in Relative Survival: Application to Colon Cancer. Journal of Clinical Epidemiology, 54 (10) 986—996. Bonadonna, G., et al. (1976). Combination Chemotherapy as an Adjuvant Treatment in Operable Breast Cancer. New England Journal of Medicine, 294, 405—410. Brancato, G., Pezzotti, P., Rapiti, E., Perucci, C. A., Abeni, D., Babbalacchio, A., and Rezza, G. (1997). Multiple Imputation Method for Estimating Incidence of HIV Infection: The Multicenter Prospective HIV Study. International Journal of Epidemiology, 26(5), 1107—1114. Breslow, N. (1970). A Generalized Kruskal—Wallis Test for Comparing K Samples Subject to Unequal Pattern of Censorship. Biometrika, 57, 579—594. Breslow, N. (1974). Covariance Analysis of Survival Data under the Proportional Hazards Model. International Statistical Review, 43, 43—54. Breslow, N. E. (1975). Analysis of Survival Data under the Proportional Hazards Model. International Statistical Review, 43, 45—48. Breslow, N. E., and Crowley, J. (1974). A Large Sample Study of the Life Table and Product Limit Estimates under Random Censoring. Annals of Statistics, 2, 437—453. Breslow, N. E., and Day, N. E. (1980). Statistical Methods in Cancer Research, Vol. 1, The Analysis of Case-Control Studies. International Agency for Research on Cancer, Lyon, France. Breslow, N., and Powers, W. (1978). Are There Two Logistic Regressions for Retrospective Studies? Biometrics, 34, 100—105. Breslow, N. E., Day, N. E., Halvorsen, K. T., Prentice, R. L., and Sabai, C. (1978). Estimation of Multiple Relative Risk Functions in Matched Case-Control Studies. American Journal of Epidemiology, 108, 299—307. Broadbent, S. (1958). Simple Mortality Rates. Journal of Applied Statistics, 7, 86.



491

Broderick, A., Mori, M., Nettleman, M. D., Streed, S. A., and Wenzel, R. P. (1990). Nosocomial Infections: Validation of Surveillance and Computer Modeling to Identify Patients at Risk. American Journal of Epidemiology, 131, 734—742. Brookmeyer, R., and Goedert, J. J. (1989). Censoring in an Epidemic with an Application to Hemophilia-Associated AIDS. Biometrics, 45, 325—335. Brown, B. W., and Hollander, M. (1977). Statistics: A Biomedical Introduction. Wiley, New York. Brown, C. C. (1982). On a Goodness-of-Fit Test for the Logistic Model Based on Score Statistics. Communications in Statistics, 11, 1087—1105. Brown, G. W., and Flood, M. M. (1947). Tumbler Mortality. Journal of the American Statistical Association, 42, 562—574. Burdette, W. J., and Gehan, E. A. (1970). Planning and Analysis of Clinical Studies. Charles C. Thomas, Springﬁeld, IL. Buzdar, A. U., Gutterman, J. U., Blumehscein, G. R., Hortobagiji, G. H., Tashima, C. K., Smith, T. L, Hersh, E. M., Freiriech, E. J., and Gehan, E. A. (1978). Intensive Postoperative Chemoimmunotherapy for Patients with Stage II and Stage III Breast Cancer. Cancer, 41, 1064—1075. Byar, D. P. (1974). Selecting Optimum Treatment in Clinical Trials Using Covariate Information. Presented at the 1974 Annual Meeting of the American Statistical Association, August 28. Byar, D. P. (1980). The Veterans Administration Study of Chemoprophylaxis for Recurrent Stage I Bladder Tumors: Comparisons of Placebo, Pyridoxine, and Topical Thiotepa, In Bladder Tumors and Other Topics in Urological Oncology, edited by M. Pavone-Macaluso, P. H. Smith, and F. Edsmyn. Plenum Press, New York, pp. 363—370. Byar, D. P., Huse, R., and Bailar, J. C. III, and the Veterans Administration Cooperative Urological Research Group (1974). An Exponential Model Relating Censored Survival Data and Concomitant Information for Prostatic Cancer Patients. Journal of the National Cancer Institute, 52, 321—326. Byers, R. H. Jr., Morgan, W. M., Darrow, W. W., Doll, L., Jaffe, H. W., Rutherford, G., Hessol, N., and O’Malley, P. M., (1988). Estimating AIDS Infection Rates in the San Francisco Cohort. AIDS, 2(3), 207—210. Carbone, P., Kellerhouse, L., and Gehan, E. (1967). Plasmacytic Myeloma: A Study of the Relationship of Survival to Various Clinical Manifestations and Anomalous Protein Type in 112 Patients. American Journal of Medicine, 42, 937—948. Carnahan, B., Luther, H. A., and Wilkes, J. O. (1969). Applied Numerical Methods. Wiley, New York. Carter, S. K., Oleg, S., and Slavik, M. (1977). Phase I Clinical Trials, in Methods of Development of New Anticancer Drugs. National Cancer Institute Monograph 45. U.S. Department of Health, Education, and Welfare Publication (NIH) 76—1037. National Cancer Institute, Bethesda, MD. Chernoff, H., and Leiberman, G. J. (1954). Use of Normal Probability Paper. Journal of the American Statistical Association, 49, 778—785. Chiang, C. L. (1961). Standard Error of the Age-Adjusted Death Rate. Vital Statistics: Special Reports, Selected Studies, 47, 9. U.S. Department of Health, Education, and Welfare, Washington, DC.

492



Chiang, C. L. (1968). Introduction to Stochastic Processes in Biostatistics. Wiley, New York. Chiasson, M. A., Stoneburner, R. L., et al. (1990). Risk Factors for Human Immunodeﬁciency Virus Type 1 (HIV-1) Infection in Patients at a Sexually Transmitted Disease Clinic in New York City. American Journal of Epidemiology, 131, 208—220. Clayton, D., and Cuzick, J. (1985). The Em algorithm for Cox’s regression model using GLIM. Applied Statistics, 34, 148—156. Cochran, W. G., and Cox, G. M. (1957). Experimental Designs, 2nd ed. Wiley, New York. Cohen, A. C., Jr. (1951). Estimating Parameters of Logarithmic-Normal Distributions by Maximum Likelihood. Journal of the American Statistical Association, 46, 206—212. Cohen, A. C., Jr. (1959). Simpliﬁed Estimators for the Normal Distribution When Samples Are Singly Censored or Truncated. Technometrics, 1(3), 217—237. Cohen, A. C., Jr. (1961). Table for Maximum Likelihood Estimates: Singly Truncated and Singly Censored Samples. Technometrics, 3, 535—541. Cohen, A. C., Jr. (1963). Progressively Censored Sample in Life Testing. Technometrics, 5, 327—339. Cohen, A. C., Jr. (1976). Progressively Censored Sampling in the Three Parameter Log-Normal Distribution. Technometrics, 18. Cohen, J., and Cohen, P. (1975). Applied Multiple Regression/Correlation Analysis for the Behavioral Sciences. Lawrence Erlbaum Associates, Hillsdale, NJ. Collett, D. (1991). Modelling Binary Data. Chapman & Hall, London. Collins, J. A., Garner, J. B., Wilson, E. H., Wrixon, W., and Casper, R. F. (1984). A Proportional Hazards Analysis of the Clinical Characteristics of Infertile Couples. American Journal of Obstetrics and Gynecology, 148, 527—532. Connelly, R. R., Cutler, S. J., and Baylis, P. (1966). End Result in Cancer of the Lung: Comparison of Male and Female Patients. Journal of the National Cancer Institute, 36, 277—287. Cornﬁeld, J. (1951). A Method of Estimating Comparative Rates from Clinical Data: Applications to Cancer of the Lung, Breast and Cervix. Journal of the National Cancer Institute, 11, 1269—1275. Cornﬁeld, J. (1956). A Statistical Problem Arising from Retrospective Studies, in Proceedings of the 3rd Berkeley Symposium on Mathematical Statistics and Probability, Vol. 4, edited by J. Neyman. University of California Press, Berkeley, CA, 135—148. Cornﬁeld, J. (1962). Joint Dependence of Risk of Coronary Heart Disease in Serum Cholesterol and Systolic Blood Pressure: A Discriminant Function Analysis. Federation Proceedings, 21, 58—61. Correa, P., Pickle, L. W., Fortham, E., et al. (1983). Passive Smoking and Lung Cancer. Lancet, 2, 595—597. Cox, D. R. (1961). Tests of Separate Families of Hypotheses. Proc. Fourth Berkeley Symposium in Mathematical Statistics, I, Berkeley: University of California Press, 105—123.



493

Cox, D. R. (1962). Further Results on Tests of Separate Families of Hypotheses. J. R. Stat. Soc. B, 24, 406—424. Cox, D. R. (1953). Some Simple Tests for Poisson Variates. Biometrika, 40, 354—360. Cox, D. R. (1959). The Analysis of Exponentially Distributed Life-Times with Two Types of Failures. Journal of the Royal Statistical Society, Series B, 21, 411—421. Cox, D. R. (1962). Renewal Theory. Methuen, London. Cox, D. R. (1964). Some Applications of Exponentially Distributed Life-Times with Two Types of Failures. Journal of the Royal Statistical Society, Series B, 26, 103—110. Cox, D. R. (1970). Analysis of Binary Data. Methuen, London. Cox, D. R. (1972). Regression Models and Life Tables. Journal of the Royal Statistical Society, Series B, 34, 187—220. Cox, D. R., and Hinkley, D. V. (1974). T heoretic Statistics, Chapman and Hall, London. Cox, D. R., and Oakes, D. (1984). Analysis of Survival Data. Chapman & Hall, New York. Cox, D. R., and Snell, E. J. (1968). A General Deﬁnition of Residuals. Journal of the Royal Statistical Society, Series B, 30, 248—275. Cox, D. R., and Snell, E. J. (1989). The Analysis of Binary Data, 2nd ed. Chapman & Hall, London. Crawford, S. L., Tennstedt, S. L., and McKinlay, J. B. (1995). A Comparison of Analytic Methods for Non-random Missingness of Outcome Data. J. Clin Epidemiol, 48, 209—219. Crist, W., Boyett, J., and Jackson, J., et al. (1989). Prognostic Importance of the Pre-B-Cell Immunophenotype and Other Presenting Features in B-Lineage Childhood Acute Lymphoblastic Leukemia: A Pediatric Oncology Group Study. Blood, 74, 1252—1259. Crowley, J., and Hu, M. (1977). Covariance Analysis of Heart Transplant Survival Data. Journal of the American Statistical Association, 72, 27—36. Crowley, J., and Thomas, D. R. (1975). Large Sample Theory for the Log Rank Test. Technical Report 415. Department of Statistics, University of Wisconsin, Madison, WI. Cutler, S. J., and Ederer, F. (1958). Maximum Utilization of the Life Table Method in Analyzing Survival. Journal of Chronic Diseases, 8, 699—712. Cutler, S. J., Griswold, M. H., and Eisenberg, H. (1957). An Interpretation of Survival Rates: Cancer of the Breast. Journal of the National Cancer Institute, 19, 1107— 1117. Cutler, S. J., Ederer, F., Griswold, M. H., and Greenberg, R. A. (1959). Survival of Breast-Cancer Patients in Connecticut, 1935—54. Journal of the National Cancer Institute, 23, 1137—1156. Cutler, S. J., Ederer, F., Griswold, M. H., and Greenberg, R. A. (1960a). Survival of Patients with Uterine Cancer, Connecticut, 1935—54. Journal of the National Cancer Institute, 24, 519—539. Cutler, S. J., Ederer, F., Griswold, M. H., and Greenberg, R. A. (1960b). Survival of Patients with Ovarian Cancer, Connecticut, 1935—54. Journal of the National Cancer Institute, 24, 541—549.

494



Cutler, S. J., Axtell, L., and Heise, H. (1967). Ten Thousand Cases of Leukemia: 1940—62. Journal of the National Cancer Institute, 39, 993—1026. Daniel, C. (1959). Use of Half-Normal Plots in Interpreting Factorial Two-Level Experiments. Technometrics, 1, 311—341. Daniel, W. W. (1987). Biostatistics: A Foundation for Analysis in the Health Sciences. Wiley, New York. Davis, D. J. (1952). An Analysis of Some Failure Data. Journal of the American Statistical Association, 47, 113—150. Davis, H. T., and Feldstein, M. L. (1979). The Generalized Pareto Law as a Model for Progressively Censored Survival Data. Biometrika, 66, 299—306. Dawber, T. R. (1980). The Framingham Study. Harvard University Press, Cambridge, MA. Dawber, T. R., Meadors, G. F., and Moore, F. E. Jr. (1951). Epidemiological Approaches to Heart Disease: The Framingham Study. American Journal of Public Health, 41, 279—286. Delong, D. M., Guirguis, G. H., and So, Y. C. (1994). Efﬁcient Computation of Subset Selection Probablilities with Application to Cox Regression. Biometrica. 81 607—611. Dharmalingam, A., Pool, I., and Dickson, J. (2000). Biosocial Determinants of Hysterectomy in New Zealand. American Journal of Public Health, 90(9), 1455—1458. Dixon, W. J., Brown, M. B., Engelman, L., Hill, M. A., and Jennrich, R. I. (1990). BMDP Statistical Software Manual. University of California Press, Berkeley, CA. Draper, N. R., and Smith, H. (1966). Applied Regression Analysis. Wiley, New York. Drenick, R. F. (1960). The Failure Law of Complex Equipment. Journal of Social and Industrial Applied Mathematics, 8, 680. Dunn, O. J. (1964). New Table for Multiple Comparisons with a Control. Biometrics, 20, 482—491. Ederer, F., Axtell, L. M., and Cutler, S. J. (1961). The Relative Survival Rate: A Statistical Methodology. National Cancer Institute Monographs, 6, 101—121. Efron, B. (1975). The Efﬁciency of Logistic Regression Compared to Normal Discriminant Analysis. Journal of the American Statistical Association, 70, 892—898. Efron, B. (1977). The Efﬁciency of Cox’s Likelihood Function for Censored Data. Journal of the American Statistical Association, 72, 557—565. Efron, B. (1994). Missing Data, Imputation, and the Bootstrap. Journal of the American Statistical Association, 89, 463—475. Eisenberger, M., Krasnow, S., Ellenberg, S., et al. (1989). A Comparison of Carboplatin Plus Methotrexate versus Methotrexate Alone in Patients with Recurrent and Metastatic Head and Neck Cancer. Journal of Clinical Oncology, 7, 1341—1345. Elaad, E., and Ben-Shakhar, G. (1989). Effects of Motivation and Verbal Response Type on Psychophysiological Detection of Information. Psychophysiology, 26, 442—451. Elandt-Johnson, R. C., and Johnson, N. L. (1980). Survival Models and Data Analysis. Wiley, New York. Enas, G. G., Dornseit, B. E., Sampson, C. B., Rockhold, F. W., and Wuu, J. (1989). Monitoring versus Interim Analysis of Clinical Trials: A Perspective from the Pharmaceutical Industry. Controlled Clinical Trials, 10, 57—70.



495

Epstein, B. (1958). The Exponential Distribution and Its Role in Life Testing. Industrial Quality Control, 15, 2—7. Epstein, B. (1960a). Estimation of the Parameters of Two Parameter Exponential Distribution from Censored Samples. Technometrics, 2, 403—406. Epstein, B. (1960b). Estimation from Life Test Data. Technometrics, 2, 447—454. Epstein, B., and Sobel, M. (1953). Life Testing. Journal of the American Statistical Association, 48, 486—502. Farewell, V. T. (1979). Some Results on the Estimation of Logistic Models Based on Retrospective Data. Biometrika, 66, 27—32. Farrington, C. P. (2000). Residuals for Proportional Hazards Models with IntervalCensored Survival Data. Biometrics, 56(2), 473—482. Feigl, P., and Zelen, M. (1965). Estimation of Exponential Survival Probabilities with Concomitant Information. Biometrics, 21, 826—838. Feinleib, M. (1960). A Method of Analyzing Log-Normally Distributed Survival Data with Incomplete Follow-up. Journal of the American Statistical Association, 55, 534—545. Feinleib, M., and MacMahon, B. (1960). Variation in the Duration of Survival of Patients with Chronic Leukemias. Blood, 17, 332—349. Feskanich, D., Singh, V., Willett, W. C., and Colditz, G. A. (2002). Vitamin A Intake and Hip Fractures among Postmenopausal Women. Journal of the American Medical Association, 287(1) 47—54. Fish, E. B., Chapman, J. A. and Link, M. A. (1998). Competing Causes of Death for Primary Breast Cancer. Annals of Surgical Oncology, 5(4), 368—375. Fisher, R. A. (1922). On the Mathematical Foundation of Theoretical Statistics. Philosophical Transactions of the Royal Society of London, Series A, 222. Fisher, R. A. (1936). The Use of Multiple Measurements in Toxonomic Problems. Annals of Eugenics, 7, 312—330. Fleiss, J. L. (1979). Conﬁdence Intervals for the Odds Ratio in Case-Control Studies: The State of the Art. Journal of Chronic Diseases, 32, 69—82. Fleiss, J. L. (1981). Statistical Methods for Rates and Proportions. Wiley, New York. Fleming, T. R., and Harrington, D. P. (1979). Non-parametric Estimation of the Survival Distribution in Censored Data. Unpublished manuscript. Fleming, T. R., and Harrington, D. P. (1991). Counting Processes and Survival Analysis. Wiley, New York. Fleming, T. R., O’Fallon, J. R., O’Brian, P. C., and Harrington, D. P. (1980). Modiﬁed Kolmogorov—Smirnov Test Procedures with Application to Arbitrarily Right Censored Data. Biometrics, 36, 607—626. Fleming, T. R., Harrington, D. P., and O’Brien, P. C. (1984). Designs for Group Sequential Tests. Controlled Clinical Trials, 5, 348—361. Florin, V., and Ronghui, X. (2000). Proportional Hazards Model with Random Effects. Statistics in Medicine, 19(24), 3309—3324. Fraser, D. A. S. (1968). The Structure of Inference. Wiley, New York. Freedman, L. S. (1982). Tables of the Number of Patients Required in Clinical Trials Using the Log Rank Test. Statistics in Medicine, 1, 121—129.

496



Frei, E., et al. (1961). Studies of Sequential and Combination Antimetabolite Therapy in Acute Leukemia: 6—Mercaptopurine and Methotrexate. Blood, 18, 431—454. Freireich, E. J., Gehan, E. A., Frei, E., et al. (1963). The Effect of 6-Mercaptopurine on the Duration of Steroid-Induced Remissions in Acute Leukemia: A Model for Evaluation of Other Potential Useful Therapy. Blood, 21(6), 699—716. Freireich, E. J., Gehan, E. A., Rall, D. P., Schmidt, L. H., and Skipper, H. E. (1966). Quantitative Comparison of Toxicity of Anticancer Agents in Mouse, Rat, Hamster, Dog, Monkey, and Man. Cancer Chemotherapy Report, 50, 4. Freireich, E. J., Gehan, E. A., Bodey, G. P., Hersh, E. M., Hart, J. S., Gutterman, J. U., and McCredie, K. B. (1974). New Prognostic Factors Affecting Response and Survival in Adult Leukemia. Transactions of the Association of American Physicians, 87, 298—305. Friedman, L. M., Furberg, C. D., and DeMets, D. L. (1985). Fundamentals of Clinical Trials, 2nd ed. PSG Publishing, Littleton, MA. Gaddum, J. H. (1945a). Log Normal Distributions. Nature, London, 156, 463. Gaddum, J. H. (1945b). Log Normal Distributions. Nature, London, 156, 747. Gail, M., and Gart, J. J. (1973). The Determination of Sample Sizes for Use with the Exact Conditional Test in 2;2 Comparative Trials. Biometrics, 29, 441—448. Gail, M. H., Lubin, J. H., and Rubinstein, L. V. (1981). Likelihood Calculations for Matched Case-Control Studies and Survival Studies with Tied Death Times. Biometrika, 68, 703—707. Gajjar, A. V., and Khatri, C. G. (1969). Progressively Censored Samples from LogNormal and Logistic Distributions. Technometrics, 11, 793—803. Garside, M. J. (1965). The Best Sub-set in Multiple Regression Analysis. Applied Statistics, 14, 196—200. Gehan, E. A. (1965a). A Generalized Wilcoxon Test for Comparing Arbitrarily Singly-Censored Samples. Biometrika, 52, 203—223. Gehan, E. A. (1965b). A Generalized Two-Sample Wilcoxon Test for Doubly-Censored Data. Biometrika, 52, 650—653. Gehan, E. A. (1970). Unpublished notes on survival time studies. The University of Texas M. D. Anderson Cancer Center, Houston, Texas. Gehan, E. A. (1969). Estimating Survival Function from the Life Table. Journal of Chronic Diseases, 21, 629—644. Gehan, E. A., and Thomas, D. G. (1969). The Performance of Some Two-Sample Tests in Small Samples with and without Censoring. Biometrika, 56, 127—132. Gelenberg, A. J., Kane, J. M., Keller, M. B., et al. (1989). Comparison of Standard and Low Serum Levels of Lithium for Maintenance Treatment of Bipolar Disorder. New England Journal of Medicine, 321, 1489—1493. George, S. L., Fernback, D. J., et al. (1973). Factors Inﬂuencing Survival in Pediatric Acute Leukemia: The SWCCSG Experience, 1959—1970. Cancer, 32, 1542—1553. Gertsbakh, I. B. (1989). Statistical Reliability Theory. Marcel Dekker, New York. Gill, R., and Schumacher, M. (1987). A Simple Test of the Proportional Hazards Assumption. Biometrika, 74, 289—300.



497

Gillum, R. F., Fortmann, S. P., Prineas, R. J., and Kottke, T. E. (1984). International Diagnostic Criteria for Acute Myocardial Infarction and Acute Stroke. American Heart Journal, 108, 150—158. Glasser, M. (1967). Exponential Survival with Covariance. Journal of the American Statistical Association, 62, 561—568. Gompertz, B. (1825). On the Nature of the Function Expressive of the Law of Human Mortality and on the New Mode of Determining the Value of Life Contingencies. Philosophical Transactions, 513. Gore, S. M. (1983). Graft Survival after Renal Transplantation: Agenda for Analysis. Kidney Int., 24, 516—525. Grambsch, P M., Therneau, T. M. (1994). Proportional Hazards Tests in Diagnostics Based on Weighted Residuals. Biometrika, 81, 515—526. Gray, R. J. (1990). Some Diagnostic Methods for Cox Regression Models through Hazard Smoothing. Biometrics, 46, 93—102. Green, P. J. (1984). Iteratively Reweighted Least Squares for Maximum Likelihood Estimation, and Some Robust and Resistant Alternatives (with discussion). Journal of the Royal Statistical Society, 46(2), 149—192. Greenwood, J. A., and Durand, D. (1960). Aids for Fitting the Gamma Distribution by Maximum Likelihood. Technometrics, 2, 55—65. Greenwood, M. (1926). The Natural Duration of Cancer. Reports on Public Health and Medical Subjects, Her Majesty’s Stationary Ofﬁce, London, 33, 1—26. Griswold, M. H., and Cutler, S. J. (1956). The Connecticut Cancer Register: Seventeen Years of Experience. Connecticut Medical Journal, 20, 366—372. Griswold, M. H., Wilder, C. S., Cutler, S. J., and Pollack, E. S. (1955). Cancer in Connecticut, 1935—1951. Monograph. Connecticut State Department of Health, Hartford, CT. Grizzle, J. E. (1967). Continuity Correction in the -Test for 2;2 Tables. American Statistician, 21, 28—32. Gross, A. J., and Clark, V. A. (1975). Survival Distributions: Reliability Applications in the Biomedical Sciences. Wiley, New York. Grove, R. D., and Hetzel, A. M. (1963). Vital Statistics Rates in the United States, 1940—1960. National Center for Health Statistics, Washington, DC. Gupta, A. K. (1952). Estimation of the Mean and Standard Deviation of a Normal Population from a Censored Sample. Biometrika, 39, 260—273. Gupta, S. S. (1960). Order Statistics from the Gamma Distribution. Technometrics, 2, 243—262. Hagar, H. W., and Bain, L. J. (1970). Inferential Procedures for the Generalized Gamma Distribution. Journal of the American Statistical Association, 65, 1601—1609. Hahn, G. J., and Shapiro, S. S. (1967). Statistical Models in Engineering. Wiley, New York. Haldane, J. B. S. (1956). The Estimation and Signiﬁcance of the Logarithm of a Ratio of Frequencies. Annals of Human Genetics, 20, 309—311. Halperin, M. (1952). Maximum Likelihood Estimation in Truncated Samples. Annals of Mathematical Statistics, 23, 226—238.

498



Halperin, M., Blackwelder, W. C., and Verter, J. I. (1971). Estimation of the Multivariate Logistic Risk Function: A Comparison of the Discriminant Function and Maximum Likelihood Approaches. Journal of Chronic Diseases, 24, 125—158. Hammond, I. W., Lee, E. T., Davis, A. W., and Booze, C. F. (1984). Prognostic Factors Related to Survival and Complication-Free Times in Airmen Medically Certiﬁed after Coronary Bypass Surgery. Aviation, Space, and Environmental Medicine, April, pp. 321—331. Hannan, E. J. (1979). The Determination of the Order of an Autoregression. Journal of the Royal Statistical Society, Series B, 41, 190—195. Hanson, B. S., Isacsson, S-O., Janzon, L., and Lindell, S. E. (1989). Social Network and Social Support Inﬂuence Mortality in Elderly Men. American Journal of Epidemiology, 130, 100—111. Harrison, J. D., Jones, J. A., and Morris, D. L. (1990). The Effect of the Gastrin Receptor Antagonist Proglumide on Survival in Gastric Carcinoma. Cancer, 66, 1449—1452. Hart, J. S., George, S. L., Frei, E., Bodey, G. P., Nickerson, R. C., and Freireich, E. J. (1977). Prognostic Signiﬁcance of Pretreatment Proliferative Activity in Adult Acute Leukemia. Cancer, 39, 1603—1617. Harter, H. L., and Moore, A. H. (1965). Maximum Likelihood Estimation of the Parameters of Gamma and Weibull Populations from Complete and from Censored Samples. Technometrics, 7, 639—643. Harter, H. L., and Moore, A. H. (1966). Local Maximum Likelihood Estimation of the Parameters of Three-Parameter Log-Normal Population from Complete and Censored Sample. Journal of the American Statistical Association, 61, 842—851. Harter, H. L., and Moore, A. H. (1967). Asymptotic Variance and Covariances of Maximum Likelihood Estimators, from Censored Samples, of the Parameters of Weibull and Gamma Parameters. Annals of Mathematical Statistics, 38, 557—570. Hastings, N. A. J., and Peacock, J. B. (1974). Statistical Distributions. Butterworth, London. Hauck, W. W., Jr., and Donner, A. (1977). Wald’s Test as Applied to Hypotheses in Logit Analysis. Journal of the American Statistical Association, 72, 851—853. Haughton, D. M. A. (1988). On the Choice of a Model to Fit Data from an Exponential Family. Annals of Statistics, 16, 342—355. Heitjan, D. F. (1997). Annotation: What Can be Done About Missing Data? Approaches to imputation, Am. J. Public Health, 87, 548—550. Hemstreet, G. P., Yin, S., Ma, Z., Bonner, R. B., Bi, W., Rao, J. Y., Zang, M., Zheng, Q., Bane, B., Asal, N., Li, G., Feng, P., Hurst, R. E., and Wang, W. (2001). Biomarker Risk Assessment and Bladder Cancer Detection in a Cohort Exposed to Benzidine, Journal of the National Cancer Institute, 93, 427—436. Hill, A. B. (1960a). Controlled Clinical Trials. Blackwell Scientiﬁc, Oxford Hill, A. B. (1960b). Statistical Methods in Clinical and Preventive Medicine. Oxford University Press, Oxford. Hill, A. B. (1971). Principles of Medical Statistics. Oxford University Press, New York. Hirayama, T. (1981). Non-smoking Wives of Heavy Smokers Have a Higher Risk of Lung Cancer: A Study from Japan. British Medical Journal, 282, 183—185.



499

Hoel, D. G., Sobel, M., and Weiss, G. H. (1975). A Survey of Adaptive Sampling for Clinical Trials. Perspectives in Biometrics, 1, 29—61. Holford, T. R., White, C., and Kelsey, J. L. (1978). Multivariate Analysis for Matched Case-Control Studies. American Journal of Epidemiology, 107, 245—256. Hollander, M., and Proschan, F. (1979). Testing to Determine the Underlying Distribution Using Randomly Censored Data. Biometrics, 35, 393—401. Hollander, M., and Wolfe, D. A. (1973). Nonparametric Statistical Methods. Wiley, New York. Horner, R. D. (1987). Age at Onset of Alzheimer’s Disease: Clue to the Relative Importance of Etiologic Factors? American Journal of Epidemiology, 126, 409—414. Hosmer, D. W., and Lemeshow, S. (1980). A Goodness-of-Fit Test for the Multiple Logistic Regression Model. Communications in Statistics, A10, 1043—1069. Hosmer, D. W., and Lemeshow, S. (1999). Applied Survival Analysis, 2nd ed. Wiley, New York. Hosmer, D. W., and Lemeshow, S. (2000). Applied Logistic Regression. Wiley, New York. Howell, D. W. (1987). Statistical Methods for Psychology. Duxbury Press, Boston. Hung, C. T., Lim, J. K. C., and Zoest, A. R. (1988). Optimization of High-Performance Liquid Chromatographic Analysis for Isoxazolye Penicillins Using Factorial Design. Journal of Chromatography, 425, 331—341. Ibrahim, J. G., Chen, M. H., and Sinha, D. (2001). Bayesian Survival Analysis. Springer-Verlag, New York Ingram, D. D., and Kleinman, J. C. (1989). Empirical Comparisons of Proportional Hazards and Logistic Regression Models. Statistics in Medicine, 8, 525—538. Irwin, J. O. (1949). The Standard Error of an Estimate of Expectational Life. Journal of Hygiene, 47, 188—189. Jenkins, S. P. (1997). Discrete Time Proportional Hazards Regression. Stata Technical Bulletin, 39, 17—32. Jennings, D. E. (1986). Judging Inference Adequacy in Logistic Regression. Journal of the American Statistical Association, 81, 471—476. Johnson, N. L., and Kotz, S. (1970a). Distributions in Statistics: Continuous Univariate Distributions (Vol. 1) Houghton Mifﬂin, Boston. Johnson, N. L., and Kotz, S. (1970b). Distributions in Statistics: Continuous Univariate Distributions. (Vol. 2) Houghton Mifﬂin, Boston Johnson, P., and Pearce, J. M. (1990). Recurrent Spontaneous Abortion and Polycystic Ovarian Disease: Comparison of Two Regimens to Induce Ovulation. British Medical Journal, 300, 154—156. Kahn, H. A. (1983). An Introduction to Epidemiologic Methods. Oxford University Press, New York. Kalbﬂeisch, J. D. (1974). Some Extensions and Applications of Cox’s Regression and Life Model. Presented at the joint meeting of the Biometric Society and the American Statistical Association, Tallahassee, FL, March 20—22. Kalbﬂeisch, J. D., and Prentice, R. L. (1973). Marginal Likelihoods Based on Cox’s Regression and Life Table Model. Biometrika, 60, 267—278.

500



Kalbﬂeisch, J. D., and Prentice, R. L. (1980). The Statistical Analysis of Failure Time Data. Wiley, New York. Kao, J. H. K. (1958). Computer Methods for Estimating Weibull Parameters in Reliability Studies. I.R.E. Transactions on Reliability and Quality Control, PGRQC 13, 15—22. Kaplan, E. L., and Meier, P. (1958). Nonparametric Estimation from Incomplete Observations. Journal of the American Statistical Association, 53, 457—481. Kay, R. (1979). Proportional Hazard Regression Models and the Analysis of Censored Survival Data. Applied Statistics, 26, 227—237. Kay, R. (1984). Goodness of Fit Methods for the Proportional Hazards Model: A Review. Revue Epidemiologie et de Santé Publique, 32, 185—198. Kelsey, J. L., Thompson, W. D., and Evans, A. S. (1986). Methods in Observational Epidemiology. Oxford University Press, New York. Kessing, L.V., Olsen, E. W., and Andersen, P. K. (1999). Recurrence in Affective Disorder: Analyses with Frailty Models. American Journal of Epidemiology, 149(5), 404—411. King, J. R. (1971). Probability Charts for Decision Making. Industrial Press, New York. King, M., Bailey, D. M., Gibson, D. G., Pitha, J. V., and McCay, P. B. (1979). Incidence and Growth of Mammary Tumors Induced by 7,12-Dimethylbenz()antheacene as Related to the Dietary Content of Fat and Antioxidant. Journal of the National Cancer Institute, 63, 656—664. Kitagawa, E. M. (1964). Standardized Comparisons in Population Research. Demography, 1, 296—315. Klein, J. P., and Moeschberger, M. L. (1997) Survival Analysis. Springer-Verlag, New York. Kleinbaum, D. G. (1994). L ogistic Regression: A Self-L earning Text. Springer-Verlag, New York. Kleinbaum, D. G., Kupper, L. L., and Muller, K. E. (1988). Applied Regression Analysis and Other Multivariate Methods, 2nd ed. PWS-Kent, Boston. Kodlin, D. (1967). A New Response Time Distribution. Biometrics, 23, 227—239. Krishna, I. P. V. (1951). A Non-parametric Method of Testing k Samples. Nature, 167, 33. Kruskal, W. H., and Wallis, W. A. (1952). Use of Ranks in One-Criterion Variance Analysis. Journal of the American Statistical Association, 47, 583—621. Kuzma, J. W. (1967). A Comparison of Two Life Table Methods. Biometrics, 23, 51—64. Lagakos, S. W. (1980). The Graphical Evaluation of Explanatory Variables in Proportional Hazard Regression Models. Biometrika, 68, 93—98. Lan, K. K. G., and DeMets, D. L. (1983). Discrete Sequential Boundaries for Clinical Trials. Biometrika, 70, 659—663. Lan, K. K. G., and DeMets, D. L. (1989). Changing Frequency of Interim Analysis in Sequential Monitoring. Biometrics, 45, 1017—1020. Lassare, S. (2001). Analysis of Progress in Road Safety in Ten European Countries. Accident Analysis and Prevention, 33(6), 743—751. Lawless, J. F. (1982). Statistical Methods and Model for Lifetime Data. Wiley, New York.



501

Lawless, J. F. (1983). Statistical Methods in Reliability. Technometrics, 25, 305—316. Lee, A. H., and Yau, K. K. (2001) Determining the Effects of Patient Case Mix on Length of Hospital Stay: A Proportional Hazards Frailty Model Approach. Methods of Information in Medicine, 40(4), 288—292. Lee, E. T. (1980). Statistical Methods for Survival Data Analysis. Lifetime Learning Publications, Belmont, CA. Lee, E. T. (1992). Statistical Methods for Survival Data Analysis, second edition, Wiley, New York. Lee, E. T., and Thomas, D. R. (1980). Conﬁdence Interval for Comparing Two Life Distributions. IEEE Transactions on Reliability, R-29, 51—56. Lee, E. T., Desu, M. M., and Gehan, E. A. (1975). A Monte-Carlo Study of the Power of Some Two-Sample Tests. Biometrika, 62, 425—432. Lee, E. T., Ishmael, D. R., Bottomley, R. H., and Murray, J. L. (1982). An Analysis of Skin Tests and Their Relationship to Recurrence and Survival in Stage III and Stage IV Melanoma Patients. Cancer, 49, 2336—2341. Lee, E. T., Yeh, J. L., Cleves, M. A., and Shafer, D. (1988). Vascular Complications in Noninsulin Dependent Diabetic Oklahoma Indians. Diabetes, 37(Suppl. 1). Lee, E. T., Lee, V. S., Lu, M., et al. (1992). Incidence and Risk Factors of Diabetic Retinopathy in Oklahoma Indians with NIDDM. Diabetes Care, 15, 1620—1627. Lee, E. T., Russell, D., Jorge, N., Kenny, S., and Yu, M. (1993). A Follow-up Study of Diabetic Oklahoma Indians: Mortality and Causes of Death. Diabetes Care, 16, 300—305. Leenen, F. H. H., Balfe, J. A., Pelech, A. N., et al. (1987). Postoperative Hypertension after Repair of Coarctation of Aorta in Children: Protective Effect of Propranolol. American Heart Journal, 113, 1164—1173. Lehmann, E. L. (1953). The Power of Rank Tests. Annals of Mathematical Statistics, 24, 23—43. Leitner, L. M., Roumy, M. Ruckebusch, M., Sutra, J. F. (1986). Monoamines and Their Catabolites in the Rabbit Carotid Body. Effets of reserpine, sympathectomy and carotid sinus nerve section, European Journal of Physiology, 406, 552—556. Lemeshow, S., and Hosmer, D. W. (1982). A Review of Goodness-of-Fit Statistics for Use in the Development of Logistic Regression Models. American Journal of Epidemiology, 115, 92—106. Leyland-Jones, B., Donnelly, H., Groshen, S., Myskowski, P., Donner, A. L., Fanucchi, M., Fox, J., and the Memorial Sloan-Kettering Antiviral Working Group (1986). 2-Fluror-5-Iodoarabinosylcytosine, A New Potent Antiviral Agent: Efﬁcacy in Immunosuppressed Individuals with Herpes Zoster. Journal of Infectious Diseases, 154, 430—436. Liang, K. Y., Self, S. G., and Liu, X. (1990). The Cox Proportional Hazards Model with Change Point: An Epidemiologic Application. Biometrics, 46, 783—793. Liang, K. Y., Self, S. G., Bandeen-Roche, K. J., and Zeger, S. L. (1995). Some Recent Developments for Regression Analysis of Multivariate Failure Time Data. Lifetime Data Analysis, 1, 403—415. Lieblein, J., and Zelen, M. (1956). Statistical Investigation of the Fatigue Life of Deep-Grove Ball Bearings. Journal of Research of the National Bureau of Standards, 57, 273—316.

502



Lilliefors, H. W. (1971). Reducing the Bias of Estimators of Parameters for the Erlang and Gamma Distribution. Unpublished manuscript. Lindley, D. V. (1968). The Choice of Variables in Multiple Regression. Journal of the Royal Statistical Society, Series B, 30, 31—53. Linka, A. Z., Sklenar, J., Wei, K. I., Jayaweera, A. R., Skyba, D. M., and Kaul, S. (1998). Assessment of Transmural Distribution of Myocardial Perfusion with Contrast Echocardiography. Circulation 3; 98(18); 1912—1920. Little, R. J., and Rubin, D. B. (1987). Statistical Analysis with Missing Data, John Wiley & Sons, New York. Liu, P. Y., and Crowley, J. (1978). Large Sample Theory of the MLE Based on Cox’s Regression Model for Survival Data. Technical Report 1. Wisconsin Clinical Cancer Center (Biostatistics), University of Wisconsin, Madison, WI. Lubin, J. H. (1981). A Computer Program for the Analysis of Matched Case-Control Studies. Computers and Biomedical Research, 14, 138—143. McAlister, D. (1879). The Law of the Geometric Mean. Proceedings of the Royal Society, 29, 367. McCracken, D. D., and Dorn, W. S. (1964). Numerical Methods and Fortran Programming. Wiley, New York. McCullagh, P. (1980). Regression Model for Ordinal Data. Journal of the Royal Statistical Society, 42(2), 109—142. McCullagh, P., and Nelder, J. A. (1989). Generalized Linear Models. Chapman & Hall, London. McFadden, D. (1976). A Comment on Discriminant Analysis ‘‘versus’’ Logit Analysis. Annals of Economic and Social Measurement, 5, 511—523. Mackenbach, J. P., Kunst, A. E., Lautenbach, H., Bijlsma, F., and Oei, Y.B. (1995). Competing Causes of Death: An Analysis Using Multiple-Cause-of-Death Data from The Netherlands. 141(5), 466—475. Mafart, P., Couvert, O., Gaillard, S., and Leguerinel, I. (2002). On Calculating Sterility in Thermal Preservation Methods: Application of the Weibull Frequency Distribution Model. International Journal of Food Microbiology, 72(12); 107—113. Mann, H. B., and Whitney, D. R. (1947). On a Test of Whether One of Two Random Variables Is Stochastically Larger Than the Other. Annals of Mathematical Statistics, 18, 50—60. Mann, N. R. (1970). Estimators and Exact Conﬁdence Bounds for Weibull Parameters Based on a Few Ordered Observations. Technometrics, 12, 345—361. Mann, N. R., Schafer, R. E., and Singpurwalla, N. D. (1974). Methods for Statistical Analysis of Reliability and Life Data. Wiley, New York. Manninen, O. (1988). Changes in Hearing, Cardiovascular Functions, Haemodynamics, Upright Body Sway, Urinary Catecholamines and Their Correlates after Prolonged Successive Exposure to Complex Environmental Conditions. International Archives of Occupational and Environmental Health, 60, 249—272. Mantel, N. (1966). Evaluation of Survival Data and Two New Rank Order Statistics Arising in Its Consideration. Cancer Chemotherapy Reports, 50, 163—170. Mantel, N. (1967). Ranking Procedures for Arbitrarily Restricted Observations. Biometrics, 23, 65—78.



503

Mantel, N. (1970). Why Stepdown Procedures in Variable Selection. Technometrics, 12, 621—625. Mantel, N. (1973). Synthetic Retrospective Studies and Related Topics. Biometrics, 29, 479—486. Mantel, N. (1977). Test and Limits for the Common Odds Ratio of Several 2;2 Contingency Tables: Methods in Analogy with the Mantel—Haenszel Procedure. Journal of Statistical Planning Information, 1, 179—189. Mantel, N., and Haenszel, W. (1959). Statistical Aspects of the Analysis of Data from Retrospective Studies of Disease. Journal of the National Cancer Institute, 22, 719—748. Mantel, N., and Hankey, B. F. (1978). A Logistic Regression Analysis of Response-Time Data Where the Hazard Function Is Time Dependent. Communications in Statistics A: Theory and Methods, 7, 333—347. Mantel, N., and Myers, M. (1971). Problems of Convergence of Maximum Likelihood Iterative Procedures in Multiparameter Situation. Journal of the American Statistical Association, 66, 484—491. Mantel, N., and Stark, C. R. (1968). Computation of Indirect Adjusted Rates in the Presence of Confounding. Biometrics, 24, 997—1005. Marascuilo, L. A., and McSweeney, M. (1977). Nonparametric and Distribution-Free Methods for the Social Sciences. Brooks/Cole, Monterey, CA. Marubini, E., and Valsecchi, M. G. (1995). Analyzing Survival Data from Clinical Trials and Observational Studies. Wiley, New York. Matthews, D. E., and Farewell, V. (1985). Using and Understanding Medical Statistics. S. Karger, New York. Mausner, J. S., and Kramer, S. (1985). Epidemiology: An Introductory Text. W.B. Saunders, Philadelphia. Meier, P. (1975a). Statistics and Medical Experimentation. Biometrics, 31, 511—529. Meier, P. (1975b). Estimation of a Distribution Function from Incomplete Observations, in Perspectives in Probability and Statistics, edited by J. Gaui. Applied Probability Trust, Shefﬁeld, England. Meisinger, C., Thorand, B., Schneider, A., Stieber, J., Doring, A., and Lowel, H. (2002) Sex Differences in Risk Factors for Incident Type 2 Diabetes Mellitus: the MONICA Augsburg Cohort Study. Arch Intern Med, 162, 82—89. Miettinen, O. S. (1979). Comments on ‘‘Conﬁdence Intervals for the Odds Ratio in Case-Control Studies: The State of the Art,’’ by J. L. Fleiss. Journal of Chronic Diseases, 32, 80—82. Miller, R. G., Jr. (1966). Simultaneous Statistical Inference. McGraw-Hill, New York. Miller, R. G. (1981). Survival Analysis. Wiley, New York. Minow, R. A., Benjamin, R. S., Lee, E. T., and Gottlieb, J. A. (1977). Adriamycin Cardiomyopathy: Risk Factors. Cancer, 39, 1397—1402. Molloy, D. W., Guyatt, G. H., Wilson, D. B., et al. (1991). Effect of Tetrahydroaminoacridine on Cognition, Function and Behaviour in Alzheimer’s Disease. Canadian Medical Association Journal, 144, 29—34. Montaner, J. S. G., Lawson, L. M., Levitt, N., et al. (1990). Costicorsteroids Prevent Early Deterioration in Patients with Moderately Severe Pneumocystis Carinii

504



Pneumonia and the Acquired Immunodeﬁciency Syndrome (AIDS). Annals of Internal Medicine, 113, 14—20. Moolgavkar, S., Lustbader, E., and Venzon, D. J. (1985). Assessing the Adequacy of the Logistic Regression Model for Matched Case-Control Studies. Statistics in Medicine, 4, 425—435. Moreau, T., O’Quigley, J., and Mesbah, M. (1985). A Global Goodness-of-Fit Statistic for the Proportional Hazards Model. Applied Statistics, 34, 212—218. Morrison, D. F. (1967). Multivariate Statistical Methods. McGraw-Hill, New York. Morrison, R. S., and Siu, A. L. (2000). Survival in End-Stage Dementia Following Acute Illness. Journal of the American Medical Association, 284(1), 47—52. Myers, M., Hankey, B. F., and Mantel, N. (1973). A Logistic-Exponential Model for Use with the Response-Time Data Involving Regressor Variables. Biometrics, 29, 257—269. Myers, M. H. (1969). A Computing Procedure for a Signiﬁcance Test of the Difference between Two Survival Curves. Methodological Note 18 in Methodological Notes. End Results Sections, National Cancer Institute, National Institutes of Health, Bethesda, MD. Nadas, A. (1970). On Proportional Hazard Functions. Technometrics, 12, 413—416. National Cancer Institute (1970). Proceedings of the Symposium on Statistical Aspects of Protocol Design, San Juan, Puerto Rico, December 9—10. Natrella, M. G. (1963). Experimental Statistics. National Bureau of Standards Handbook 91. U.S. Government Printing Ofﬁce, Washington, DC, Tables A-25, A-26. Nelson, W. (1972). Theory and Applications of Hazard Plotting for Censored Failure Data. Technometrics, 14, 945—966. Nelson, W. (1982). Applied Life Data Analysis. Wiley, New York. Nemenyi, P. (1963). Distribution-Free Multiple Comparisons. Ph.D. dissertation, Princeton University. Neter, J., and Wasserman, W. (1974). Applied Linear Statistical Models. Richard D. Irwin, Homewood, IL. Nie, N. H., Hull, C. H., Jenkins, J. G., Steinbrenner, K., and Bent, D. H. (1975). SPSS: Statistical Package for the Social Sciences. McGraw-Hill, New York. O’Brien, P. C., and Fleming, T. R. (1979). A Multiple Testing Procedure for Clinical Trials. Biometrics, 35, 549—556. Osgood, E. W. (1958). Methods for Analyzing Survival Data, Illustrated by Hodgkin’s Disease. American Journal of Medicine, 24, 40—47. Parker, R. L., Dry, T. J., Willius, F. A., and Gage, R. P. (1946). Life Expectancy in Angina Pectoris. Journal of the American Medical Association, 131, 95—100. Parzan, E. (1974). Some Recent Advances in Time Series Modeling. IEEE Transactions on Automatic Control. AC-19, 723—730. Pearson, E. S., and Hartely, N. O. (1958). Biometrika Tables for Statisticians, Vol. 1. Cambridge University Press, Cambridge. Pearson, K. (1922, 1957). Tables of the Incomplete -Function. Cambridge University Press, Cambridge. Pershagen, G. (1986). Review of Epidemiology in Relation to Passive Smoking. Archives of Toxicology, 9(Suppl.), 63—73.



505

Pershagen, G., Hrubec, Z., and Svensson, C. (1987). Passive Smoking and Lung Cancer in Swedish Women. American Journal of Epidemiology, 125, 17—24. Peto, R., and Lee, P. N. (1973). Weibull Distributions for Continuous Carcinogenesis Experiments. Biometrics, 29, 457—470. Peto, R., and Peto, J. (1972). Asymptotically Efﬁcient Rank Invariant Procedures. Journal of the Royal Statistical Society, Series A, 135, 185—207. Peto, R., Lee, P. N., and Paige, W. S. (1972). Statistical Analysis of the Bioassay of Continuous Carcinogens. British Journal of Cancer, 26, 258—261. Peto, R., Pike, M. C., Armitage, P., Breslow, N. E., Cox, D. R., Howard, S. V., Mantel, N., McPherson, K., Peto, J., and Smith, P. G. (1976, 1977). Design and Analysis of Randomized Clinical Trials Requiring Prolonged Observation of Each Patient. British Journal of Cancer, Part I, 34, 585—612, 1976; Part II, 35, 1—39, 1977. Pierce, M., Borges, W. H., Heyn, R., Wolfe, J., and Gilbert, E. S. (1969). Epidemiological Factors and Survival Experience in 1770 Children with Acute Leukemia. Cancer, 23, 1296—1304. Pike, M. C. (1966). A Method of Analysis of a Certain Class of Experiments in Carcinogenesis. Biometrics, 22, 142—161. Piper, J. M., Matanoski, G. M., and Tonascia, J. (1986). Bladder Cancer in Young Women. American Journal of Epidemiology, 123, 1033—1042. Pregibon, D. (1984). Data Analytic Methods for Matched Case-Control Studies. Biometrics, 40, 639—651. Prentice, R. L. (1973). Exponential Survivals with Censoring and Explanatory Variables. Biometrika, 60, 279—288. Prentice, R. L. (1974). A Log-Gamma Model and Its Maximum Likelihood Estimation. Biometrica. 61 539—544. Prentice, R. L. (1976). Use of the Logistic Model in Retrospective Studies. Biometrics, 32, 599—606. Prentice, R. L., and Gloeckler, L. A. (1978). Regression Analysis of Grouped Survival Data with Application to Breast Cancer Data. Biometrics, 34, 57—67. Prentice, R. L., and Kalbﬂeisch, J. D. (1979). Hazard Rate Models with Covariates. Biometrics, 35, 25—39. Prentice, R. L., and Marek, P. (1979). A Quantitative Discrepancy between Censored Data Rank Tests. Biometrics, 35, 861—867. Prentice, R. L., and Pyke, R. (1979). Logistic Disease Incidence Models and Casecontrol Studies. Biometrica, 73, 403—411. Prentice, R. L., Williams, B. J., and Peterson, A. V. (1981). On the Regression Analysis of Multivariate Failure Time Data. Biometrica, 68, 373—379. Press, S. J. (1972). Applied Multivariate Analysis. Holt, Rinehart & Winston, New York. Press, S. J., and Wilson, S. (1978). Choosing between Logistic Regression and Discriminant Analysis. Journal of the American Statistical Association, 73, 699—705. Ralston, A., and Wilf, H. (1967). Mathematical Methods for Digital Computers. Wiley, New York. Rao, C. R. (1952). Advanced Statistical Methods in Biometric Research. Wiley, New York.

506



Rao, C. R. (1973). Linear Statistical Inference and Its Application, 2nd ed. Wiley, New York. Riffenburgh, R. H., and Johnstone, P. A. (2001). Survival Patterns of Cancer Patients. Cancer, 91(12), 2469—2475. Rissanen, J. (1986). A Predictive Least-Squares Principle. IMA Journal of Mathematical Control of Information, 3, 211—222. Rowe-Jones, D. C., Peel, A. L. G., Kingston, R. D., Shaw, J. F. L., Teasdale, C., and Cole, D. S. (1990). Single Dose Cefotaxime Plus Metronidazole versus Three Dose Cefuroxime Plus Metronidazole as Prophylaxis against Wound Infection in Colorectal Surgery: Multicentre Prospective Randomised Study. British Medical Journal, 300, 18—22. Sacher, G. A. (1956). On the Statistical Nature of Mortality, with Special Reference to Chronic Radiation Mortality. Radiology, 67, 250—257. Sarhan, A. E., and Greenberg, B. G. (1956). Estimation of Location and Scale Parameters by Order Statistics from Singly and Doubly Censored Samples, Part I, The Normal Distribution up to Samples of Size 10. Annals of Mathematical Statistics, 27, 427—451. Sarhan, A. E., and Greenberg, B. G. (1957). Estimation of Location and Scale Parameters by Order Statistics from Singly and Doubly Censored Samples, Part III. Technical Report 4-OOR, Project 1597. U.S. Army Research Ofﬁce. Sarhan, A. E., and Greenberg, B. G. (1958). Estimation of Location and Scale Parameters by Order Statistics from Singly and Doubly Censored Samples, Part II. Annals of Mathematical Statistics, 29, 79—105. Sarhan, A. E., and Greenberg, B. G. (1962). Contribution to Order Statistics. Wiley, New York. Sacks, H., Chalmers, T. C., and Smith, H. (1982). Randomized versus Historical Control for Clinical Trials. American Journal of Medicine, 72, 233—240. SAS Institute. (2000). SAS/STAT User’s Guide, Version 8.1. SAS Institute, Cary, NC. Sasieni, P. D. (1996). Proportional Excess Hazards. Biometrika, 83(1), 127—141. Savage, I. R. (1956). Contributions to the Theory of Rank Order Statistics: The Two Sample Case. Annals of Mathematical Statistics, 27, 590—615. Saw, J. G. (1959). Estimation of the Normal Population Parameters Given a Singly Censored Sample. Biometrika, 46, 150—159. Schade, D. S., Mitchell, W. J., and Griego, G. (1987). Addition of Sulfonylurea to Insulin Treatment in Poorly Controlled Type II Diabetes. Journal of the American Medical Association, 257, 2441—2445. Schafer, J. L. (1999). Multiple Imputation: a Primer. Stat Methods, 8, 3—15. Schlesselman, J. J. (1982). Case-Control Studies. Oxford University Press, New York. Schoenfeld, D. (1982). Partial Residuals for Proportional Hazards Regression Model. Biometrica. 69, 239—241. Schwarz, G. (1978). Estimating the Dimension of a Model. Annals of Statistics 6, 461—222. Seaman, S. R., and Bird, S. M. (2001). Proportional Hazards Model for IntervalCensored Failure Times and Time-Dependent Covariates: Application to Hazard of HIV Infection of Injecting Drug Users in Prison. Statistics in Medicine, 20(12), 1855—1870.



507

Segal, M. R., and Bloch, D. A. (1989). A Comparison of Estimated Proportional Hazards Models and Regression Trees. Statistics in Medicine, 8, 539—550. Sellke, T., and Siegmund, D. (1983). Sequential Analysis of the Proportional Hazards Model. Biometrika, 70, 315—326. Shapiro, S. S., and Wilk, M. B. (1965a). An Analysis of Variance Test for Normality (Complete Samples). Biometrika, 52, 591. Shapiro, S. S., and Wilk, M. B. (1965b). Testing for Distributional Assumptions: Exponential and Uniform Distributions. Unpublished manuscript. Shibata, R. (1980). Asymptotically Efﬁcient Selection of the Order of the Model for Estimating Parameters of a Linear Process. Annals of Statistics, 8, 147—165. Shipley, W. U., Thames, H. D., Sandler, H. M., Hanks, G. E., Zietman, Perez, C. A., Kuban, D. A., Hancock, S. L., and Smith, C. D. (1999). Radiation Therapy for Clinically Localized Prostate Cancer. Journal of the American Medical Association, 281(17), 1598—1604. Shryock, H. S., Sigel, J. S., and Associates (1971). The Methods and Materials of Demography, Vols. I and II. U.S. Department of Commerce, Bureau of the Census, U.S. Government Printing Ofﬁce, Washington, DC. Sichieri, R., Everhart, J. E., and Roth, H. P. (1990). Low Incidence of Hospitalization with Gallbladder Disease among Blacks in the United States. American Journal of Epidemiology, 131, 826—835. Siegmund, K. D., Todorov, A. A., and Province, M. A. (1999). A Frailty Approach for Modelling Diseases with Variable Age of Onset in Families: The NHLBI Family Heart Study. Statistics in Medicine, 18(12), 1517—1528 Sillitto, G. P. (1949). Note on Approximations to the Power Function of the ‘‘2;2 Comparative Trial.’’ Biometrika, 36, 347—352. Sirott, M. N., Bajorin, D. F., Wong, G. Y., Tao, Y., Chapman, P. B., Templeton, M. A., and Houghton, A. N. (1993). Prognostic Factors in Patients with Metastatic Malignant Melanoma: A Multivariate Analysis. Cancer, 72(10), 3091—3098. Slud, E. V., and Wei, L. J. (1982). Two-Sample Repeated Signiﬁcance Tests Based on the Modiﬁed Wilcoxon Statistic. Journal of the American Statistical Society, 77, 862—868. Snedecor, G. W., and Cochran, W. G. (1967). Statistical Methods. Iowa State University Press, Ames, IA. SPSS (2000). SPSS-S User’s Guide, Version 10.1. SPSS, Chicago. Stacy, E. W. (1962). A Generalization of the Gamma Distribution. Annals of Mathematical Statistics, 33, 1187—1192. Stacy, E. W., and Mihram, G. A. (1965). Parameter Estimation for a Generalized Gamma Distribution. Technometrics, 7, 349—358. Statistics and Epidemiology Research Corporation (SERC) (1988). EGRET Statistical Software. SERC, Seattle, WA. Steering Committee on the Physicians Health Study Research Group (1989). Final Report on the Aspirin Component of the Ongoing Physicians’ Health Study. New England Journal of Medicine, 321, 129—135. Tai, B. C., Peregoudov, A., and Machin, D. (2001). A Competing Risk Approach to the Analysis of Trials of Alternative Intra-uterine Devices (IUDs) for Fertility Regulation. Statistics in Medicine, 20(23), 3589—3600.

508



Tarone, R. E. (1982). The Use of Historical Control Information in Testing a Trend in Poisson Means. Biometrics, 38(2), 457—462. Tarone, R. E., and Ware, J. (1977). On Distribution-Free Tests for Equality of Survival Distribution. Biometrics, 64, 156—160. Teitelman, A. M., Welch, L. S., Hellenbrand, K. G., and Bracken, M. B. (1990). Effect of Maternal Work Activity on Preterm Birth and Low Birth Weight. American Journal of Epidemiology, 131, 104—113. Therneau, T. M., Grambsch, P. M., and Fleming, T. R. (1990). Martingale-Based Residuals and Survival Models. Biometrica, 77, 147—160. Thoman, D. R., and Bain, L. J. (1969). Two Sample Tests in the Weibull Distribution. Technometrics, 11, 805—815. Thoman, D. R., Bain, L. J., and Antle, C. E. (1969). Inferences on the Parameters of the Weibull Distribution. Technometrics, 11, 445—460. Thoman, D. R., Bain, L. J., and Antle, C. E. (1970). Maximum Likelihood Estimation, Exact Conﬁdence Intervals for Reliability and Tolerance Limits in the Weibull Distribution. Technometrics, 12, 363—373. Truett, J., Cornﬁeld, J., and Kannel, W. B. (1967). A Multivariate Analysis of the Risk of Coronary Heart Disease in Framingham. Journal of Chronic Diseases, 20, 511—524. Tsiatis, A. A. (1980). A Note of a Goodness-of-Fit Test for the Logistic Regression Model. Biometrika, 67, 250—251. Tsiatis, A. A. (1981). A Large Sample Study of Cox’s Regression Model. Annals of Statistics, 9, 93—108. Tsiatis, A. A. (1982). Repeated Signiﬁcance Testing for a General Class of Statistics Used in Censored Survival Analysis. Journal of the American Statistical Association, 77, 855—861. Tsumagari, K., Yamamoto, H., Suganuma, N., Kato, M., Ikeda, S., Imai, K., Kira, S., and Taketa, K. (2000). Epidemiological Studies of Coincidental Outbreaks of Enterohemorrhagic Escherichia Coli O157:H7 Infection and Infectious Gastroenteritis in Niimi City, Acta Medica Okayama, 54, 265—273. Upton, G. J. G. (1978). The Analysis of Cross-Tablated Data. Wiley New York. Vaida, F., and Xu, R. (2000). Proportional Hazards Model with Random Effects. Statistics in Medicine, 19(22), 339—3324. Vasan, R. S., Larson, M. G., Leip, E. P., Evans, J. C., O’Donnell, C. J., Kannel, W. B., and Levy, D. (2001). Impact of High-Normal Blood Pressure on the Risk of Cardiovascular Disease. New England Journal of Medicine. 345(18), 1337—1340. Vaupel, J. W., Manton, K. G., and Stallard, E. (1979). The Impact of Heterogenity in Individual Frailty on the Dynamics of Mortality. Demography, 16, 439—454. Vasan, R. S., Larson, M. G., Levy, D., Evans, J. C., and Benjamin, E. J. (1997). Distribution and Categorization of Echocardiographic Measurements in Relation to Reference Limits: the Framingham Heart Study: Formulation of a Heightand Sex-speciﬁc Classiﬁcation and Its Prospective Validation. Circulation, 96, 1863—1873. Vega, G. L., and Grundy, S. M. (1989). Comparison of Lovastatin and Gemﬁbrozil in Normolipidemic Patients with Hypoalphalipoproteinemia. Journal of the American Medical Association, 262, 3148—3153.



509

Wald, A. (1947). Sequential Analysis. Wiley, New York. Wang, Wenyu (1984). The Bayesian Estimater of the Orders of AR(k) and ARMA(p,q) Models of Time Series. Acta Mathematicae Applicatae Sinica, 7(2), 185—195. Wang, Wenyu (1989). Statistical Inference on Aggregated Markov Processes. Ph.D. dissertation. Department of Mathematics, University of Maryland. Waters, M. A., Selvin, S., and Rappaport, S. M. (1991). A Measure of Goodness-of-ﬁt for the Lognormal Model Applied to Occupational Exposures, American Industrial Hygiene Association Journal, 52, 493—502. Watson, G. S., and Wells, W. T. (1961). On the Possibility of Improving the Mean Useful Life of Items by Eliminating Those with Short Lives. Technometrics, 3, 281—298. Wei, L. J. (1984). Testing Goodness of Fit for Proportional Hazards Model with Censored Observations. Journal of the American Statistical Association, 79, 649— 652. Wei, L. J. (1992). On Predictive Least Squares Principle. Annals of Statistics, 20, 1—42. Wei, L. J., Lin, D. Y., and Weissfeld, L. (1989). Regression Analysis of Multivariate Incomplete Failure Time Data by Modeling Marginal Distribution. Journal of the American Statistical Association, 84, 1065—1073. Weibull, W. (1939). A Statistical Theory of the Strength of Materials. Ingenioers vetenskaps akakemien Handlingar, 151, 293—297. Weibull, W. (1951). A Statistical Distribution of Wide Applicability. Journal of Applied Mathematics, 18, 293—297. Weiss, H. (1963). A Survey of Some Mathematical Methods in the Theory of Reliability, in Statistical Theory of Reliability, edited by M. Zelen. University of Wisconsin Press, Madison, WI. Well, M. D., Lamborn, K., Edwards, M. S. B., and Wara, W. M. (1998). Inﬂuence of a Child’s Sex on Medulloblastoma. Journal of the American Medical Association, 279(18). Whayne, T. F., Alaupovic, P., Curry, M. D., Lee, E. T., Anderson, P. S., and Schechter, E. (1981). Plasma Apolipoprotein B and VLDL-, LDL-, and HDL-Cholesterol as Risk Factors in the Development of Coronary Heart Disease in Male Patients Examined by Angiography. Atherosclerosis, 39, 411—424. Wienke, A., Holm, N. V., Skytthe, A., and Yashin, A. L. (2001). The Heritability of Mortality Due to Heart Diseases: A Correlated Frailty Model Applied to Danish Twins. Twin Research, 4(4), 266—274. Wilcoxon, F. (1945). Individual Comparison by Ranking Methods. Biometrics, 1, 80—83. Wilk, M. B., Gnanadesikan, R., and Huyett, M. J. (1962a). Estimation of Parameters of the Gamma Distribution Using Order Statistics. Biometrika, 49, 525—545. Wilk, M. B., Gnanadesikan, R., and Huyett, M. J. (1962b). Probability Plots for the Gamma Distribution. Technometrics, 4, 1—20. Wilkinson, L. (1987). SYSTAT: The System for Statistics. Systat, Inc., Evanston, IL. Wilks, S. S. (1948). Order Statistics. Bulletin of the American Mathematical Society, 54, 6—50. Wilks, S. S. (1950). Mathematical Statistics. Princeton University Press, Princeton, NJ.

510



Williams, C. A., Jr. (1950). On the Choice of the Number and Width of Classes for the Chi-Square Test of Goodness of Fit. Journal of the American Statistical Association, 45, 77—86. Williams, J. E., Nieto, F. J., Sanford, C. P., and Tyroler, H. A. (2002). The Association between Trait Anger and Incident Stroke Risk: The Atherosclerosis Risk in Communities (ARIC) Study. Stroke, 33(1), 13—20. Winkleby, M. A., Ragland, D. R., and Syme, L. (1988). Self-Reported Stressors and Hypertension: Evidence of an Inverse Association. American Journal of Epidemiology, 127, 124—134. Winter, F. D., Snell, P. G., and Stray-Gundersen, J. (1989). Effects of 100% Oxygen on Performance of Professional Soccer Players. Journal of the American Medical Association, 262, 227—229. Woolf, B. (1955). On Estimating the Relation between Blood Group and Disease. Annals of Human Genetics, 19, 251—253. Wurpel, J. N., Dundore, R. L., Barbella, Y. R., Balaban, C. D., Keil, L. C., and Severs, W. B. (1986). Barrel Rotation Evoked by Intracerebroventricular Vasopressin Injections in Conscious Rats. I. Description and General Pharmacology. Brain Research, 365, 21—29. Xue, X. (2001). Analysis of Childhood Brain Tumour Data in New York City Using Frailty Models. Statistics in Medicine, 20(22), 3459—3473. Yakovlev, A. Y., Tsodikov, A. D., Boucher, K., and Kerber, R. (1999). The Shape of the Hazard Function in Breast Carcinoma: Curability of the Disease Revisited. Cancer, 85, 1789—1798. Yan, Y., Moore, R. D., and Hoover, D. R. (2000). Competing Risk Adjustment Reduces Overestimation of Opportunistic Infection Rates in AIDS. Journal of Clinical Epidemiology. 53(8), 817—822. Yashin, A. I., and Iachine, I. A. (1997). How Frailty Models Can Be Used for Evaluating Longevity Limits: Taking Advantage of an Interdisciplinary Approach. Demography, 34(1), 31—48. Young, E. M., and Fors, S. W. (2001). Factors Related to the Eating Habits of Students in Grades 9—12. Journal of School Health, 71, 483—488. Zelen, M. (1966). Applications of Exponential Models to Problems in Cancer Research. Journal of the Royal Statistical Society, Series A, 129, 368—398. Zhang, M. J., and Klein, J. P. (2001). Conﬁdence Bands for the Difference of Two Survival Curves under Proportional Hazards Model. L ifetime Data Analysis, 7, 243—254. Zippin, C., and Armitage, P. (1966). Use of Concomitant Variables and Incomplete Survival Information in the Estimation of an Exponential Survival Parameter. Biometrics, 22, 665—672.

Statistical Methods for Survival Data Analysis. Elisa T. Lee and John Wenyu Wang Copyright ¶ 2003 John Wiley & Sons, Inc. ISBN: 0-471-36999-7

Index

Accelerated failure time (AFT) model, 259 Age-speciﬁc failure rate, 11 AIC, 230, 241, 288, 289 Anderson—Gill model, 368 Annual survival ratio, 94 BIC, 230, 241, 288, 289 BMDP, 7, 94, 115, 173, 180, 188, 196, 235, 269, 273, 277, 283, 306, 319, 324, 347, 351, 356, 367, 368, 389, 394, 398, 403, 405, 413, 419, 424 Case-control study, 399 Censored observations, 2 progressively censored data, 4 singly censored data, 4 Censoring interval, 4, 260 left, 4, 260 random, 4 right, 4, 260 type I, 2 type II, 2 type III, 3 Chi-square test, 379, 381 Competing risk, 352 Conditional mortality rate, 11 Conditional probability, 399, 401 Corrected survival rate, 94 Cox’s F-test, 116, 249 Cox—Mantel test, 109 Cox—Snell residual, 199, 215, 290, 331 Cross-product ratio, 382 Cumulative hazard function, 13 Cumulative survival rate, 9

Density function: deﬁnition of, 10 types of: exponential, 135 extended generalized gamma, 153 gamma, 150 generalized gamma, 152 log-logistic, 154 lognormal, 145 Weibull, 139 Deviance residual, 331 Dichotomous outcomes, 377 Exponential distribution, 134, 263 unit exponential distribution, 135 two-parameter, 136 goodness-of-ﬁt test, 226, 233 test for equality of two distributions, 246, 249 Five-year survival rate, 94 Force of mortality, 11 Frailty model, 375 Gamma and generalized gamma distribution, 148, 277 goodness-of-ﬁt test, 227, 234, 235 test for equality of two distributions, 252 Gap time, 364 Gehan’s generalized Wilcoxon test, 107 Gompertz distribution, 157, 242 Guarantee time, 136, 173, 175 Hazard function: deﬁnition of, 11 exponential, 135

511



512 Hazard function (Continued) gamma, 152 log-logistic, 155 lognormal, 145 Weibull, 140 Hazard plotting, 29, 209 exponential, 210 log-logistic, 215 lognormal, 213 Weibull, 212 Hollander—Proschan’s test, 236 Hosmer—Lemeshow test of goodness-of-ﬁt, 388 Incomplete gamma function, 151 Instantaneous failure rate, 11

interval-censored data, 165, 260 left-censored data, 165, 260 log-logistic, 195 lognormal, 180 right-censored data, 162, 260 standard and generalized gamma, 188 two-parameter exponential, 174 Weibull, 178 Martingale residual, 331 Matched design, 401 1 : R, 401 n : n , 403 Median remaining lifetime, 91 Model selection method, 230, 233, 286, 288, 289, 310

Kaplan—Meier method, 20, 68, 216, 237 Kruskal—Wallis test, 125 multiple comparison, 128 K-sample test for censored data, 130

Normit function, 410

Life tables: abridged, 86 clinical, 87 cohort, 77 current, 77 population, 77 Likelihood ratio test, 243, 246 Link function, 410 logit, 410 probit, 410 complementary log-log, 411 Linear exponential distribution, 155 Log-logistic distribution, 154, 280 goodness-of-ﬁt test, 235 Log odds, 386 Logistic regression, 45, 385 conditional, 398 dichotomous outcomes, 377 polychotomous outcomes, 377, 413 nominal, 414 ordinal, 419 Logistic transform, 386 Log-likelihood ratio statistic, 223, 224, 388 Lognormal distribution, 143, 274 three-parameter, 146 goodness-of-ﬁt test, 227, 234 Logrank test, 111

Partial likelihood function, 301, 304, 340, 348, 354, 357, 364, 369, 371 Peto and Peto’s generalized Wilcoxon test, 116 Polychotomous outcomes, 377, 413 nominal, 414 ordinal, 419 Printice, Williams, and Peterson (PWP) model, 357, 363 Probability density function, 10 Probability plotting, 29, 200 exponential, 204 log-logistic, 208 lognormal, 206 normal, 203 Weibull, 205 Probit function, 410, 420 Product-limit estimate, 65 estimate of mean survival time, 74 variance, 70 variance of estimated mean survival time, 75 Prognostic factors, 32, 256, 339, 377 Prognostic homogeneity, 21 Proportional hazard model, 264, 270, 298 assessment of, 326 Proportional odds, 280

Mantel—Haenszel method, 28, 121 Maximum likelihood estimate: exponential, 166 Gompertz, 196

Odds ratio, 379, 382

Rayleigh distribution, 158 Recurrent events, 356 Related observations, 374 Relative mortality, 32 Relative survival rate, 94 Retrospective study, 398

 SAS, 7, 94, 115, 172, 173, 80, 188, 194, 196, 235, 268, 273, 276, 279, 283, 289, 291, 306, 310, 317, 322, 333, 346, 350, 355, 366, 389, 392, 397, 403, 408, 410, 412, 418, 424 Schoenfeld residual, 331 weighted, 332 Score statistic, 225 SPSS, 7, 94, 115, 318, 323, 336, 347, 351, 356, 367, 389, 392, 397, 405, 413, 419, 424 Standardized rate and ratio, 97 direct method, 98 indirect method, 99 SIR, 97 SMR, 97 Standardized mortality ratio, 97 Stritiﬁcation, 328, 348 Survival curve, 9 Survivorship function: deﬁnition of, 8 estimation of, 319

513 types: exponential, 135 gamma, 152 log-logistic, 154 lognormal, 145 two-parameter-exponential, 136 Weibull, 140 Test of goodness of ﬁt, 221, 222, 226, 227, 233, 234, 235, 330 Tied survival times, 302 Time-dependent covariates, 326, 339 Unconditional failure rate, 11 Wald statistic, 223, 224, 262, 388 Wei, Lin, and Weissfeld (WLW) model, 370 Weibull distribution, 138, 269 three-parameter, 141 goodness-of-ﬁt test, 226, 234 test for equality of two distributions, 251

p&s-cp.qxd

3/25/03

9:47 AM

Page 1

Statistical Methods for Survival Data Analysis. Elisa T. Lee and John Wenyu Wang Copyright ¶ 2003 John Wiley & Sons, Inc. ISBN: 0-471-36999-7

WILEY SERIES IN PROBABILITY AND STATISTICS Established by WALTER A. SHEWHART and SAMUEL S. WILKS Editors: David J. Balding, Peter Bloomfield, Noel A. C. Cressie, Nicholas I. Fisher, Iain M. Johnstone, J. B. Kadane, Louise M. Ryan, David W. Scott, Adrian F. M. Smith, Jozef L. Teugels Editors Emeriti: Vic Barnett, J. Stuart Hunter, David G. Kendall A complete list of the titles in this series appears at the end of this volume.

p&s-cp.qxd

3/25/03

9:47 AM

Page 2

WILEY SERIES IN PROBABILITY AND STATISTICS ESTABLISHED BY WALTER A. SHEWHART AND SAMUEL S. WILKS Editors: David J. Balding, Peter Bloomfield, Noel A. C. Cressie, Nicholas I. Fisher, Iain M. Johnstone, J. B. Kadane, Louise M. Ryan, David W. Scott, Adrian F. M. Smith, Jozef L. Teugels Editors Emeriti: Vic Barnett, J. Stuart Hunter, David G. Kendall The Wiley Series in Probability and Statistics is well established and authoritative. It covers many topics of current research interest in both pure and applied statistics and probability theory. Written by leading statisticians and institutions, the titles span both state-of-the-art developments in the field and classical methods. Reflecting the wide range of current research in statistics, the series encompasses applied, methodological and theoretical statistics, ranging from applications and new techniques made possible by advances in computerized practice to rigorous treatment of theoretical approaches. This series provides essential and invaluable reading for all statisticians, whether in academia, industry, government, or research.

ABRAHAM and LEDOLTER · Statistical Methods for Forecasting AGRESTI · Analysis of Ordinal Categorical Data AGRESTI · An Introduction to Categorical Data Analysis AGRESTI · Categorical Data Analysis, Second Edition ANDE L · Mathematics of Chance ANDERSON · An Introduction to Multivariate Statistical Analysis, Second Edition *ANDERSON · The Statistical Analysis of Time Series ANDERSON, AUQUIER, HAUCK, OAKES, VANDAELE, and WEISBERG · Statistical Methods for Comparative Studies ANDERSON and LOYNES · The Teaching of Practical Statistics ARMITAGE and DAVID (editors) · Advances in Biometry ARNOLD, BALAKRISHNAN, and NAGARAJA · Records *ARTHANARI and DODGE · Mathematical Programming in Statistics *BAILEY · The Elements of Stochastic Processes with Applications to the Natural Sciences BALAKRISHNAN and KOUTRAS · Runs and Scans with Applications BARNETT · Comparative Statistical Inference, Third Edition BARNETT and LEWIS · Outliers in Statistical Data, Third Edition BARTOSZYNSKI and NIEWIADOMSKA-BUGAJ · Probability and Statistical Inference BASILEVSKY · Statistical Factor Analysis and Related Methods: Theory and Applications BASU and RIGDON · Statistical Methods for the Reliability of Repairable Systems BATES and WATTS · Nonlinear Regression Analysis and Its Applications BECHHOFER, SANTNER, and GOLDSMAN · Design and Analysis of Experiments for Statistical Selection, Screening, and Multiple Comparisons BELSLEY · Conditioning Diagnostics: Collinearity and Weak Data in Regression BELSLEY, KUH, and WELSCH · Regression Diagnostics: Identifying Influential Data and Sources of Collinearity BENDAT and PIERSOL · Random Data: Analysis and Measurement Procedures, Third Edition

*Now available in a lower priced paperback edition in the Wiley Classics Library.

p&s-cp.qxd

3/25/03

9:47 AM

Page 3

BERRY, CHALONER, and GEWEKE · Bayesian Analysis in Statistics and Econometrics: Essays in Honor of Arnold Zellner BERNARDO and SMITH · Bayesian Theory BHAT and MILLER · Elements of Applied Stochastic Processes, Third Edition BHATTACHARYA and JOHNSON · Statistical Concepts and Methods BHATTACHARYA and WAYMIRE · Stochastic Processes with Applications BILLINGSLEY · Convergence of Probability Measures, Second Edition BILLINGSLEY · Probability and Measure, Third Edition BIRKES and DODGE · Alternative Methods of Regression BLISCHKE AND MURTHY (editors) · Case Studies in Reliability and Maintenance BLISCHKE AND MURTHY · Reliability: Modeling, Prediction, and Optimization BLOOMFIELD · Fourier Analysis of Time Series: An Introduction, Second Edition BOLLEN · Structural Equations with Latent Variables BOROVKOV · Ergodicity and Stability of Stochastic Processes BOULEAU · Numerical Methods for Stochastic Processes BOX · Bayesian Inference in Statistical Analysis BOX · R. A. Fisher, the Life of a Scientist BOX and DRAPER · Empirical Model-Building and Response Surfaces *BOX and DRAPER · Evolutionary Operation: A Statistical Method for Process Improvement BOX, HUNTER, and HUNTER · Statistics for Experimenters: An Introduction to Design, Data Analysis, and Model Building BOX and LUCEÑO · Statistical Control by Monitoring and Feedback Adjustment BRANDIMARTE · Numerical Methods in Finance: A MATLAB-Based Introduction BROWN and HOLLANDER · Statistics: A Biomedical Introduction BRUNNER, DOMHOF, and LANGER · Nonparametric Analysis of Longitudinal Data in Factorial Experiments BUCKLEW · Large Deviation Techniques in Decision, Simulation, and Estimation CAIROLI and DALANG · Sequential Stochastic Optimization CHAN · Time Series: Applications to Finance CHATTERJEE and HADI · Sensitivity Analysis in Linear Regression CHATTERJEE and PRICE · Regression Analysis by Example, Third Edition CHERNICK · Bootstrap Methods: A Practitioner’s Guide CHERNICK and FRIIS · Introductory Biostatistics for the Health Sciences CHILÈS and DELFINER · Geostatistics: Modeling Spatial Uncertainty CHOW and LIU · Design and Analysis of Clinical Trials: Concepts and Methodologies CLARKE and DISNEY · Probability and Random Processes: A First Course with Applications, Second Edition *COCHRAN and COX · Experimental Designs, Second Edition CONGDON · Bayesian Statistical Modelling CONOVER · Practical Nonparametric Statistics, Second Edition COOK · Regression Graphics COOK and WEISBERG · Applied Regression Including Computing and Graphics COOK and WEISBERG · An Introduction to Regression Graphics CORNELL · Experiments with Mixtures, Designs, Models, and the Analysis of Mixture Data, Third Edition COVER and THOMAS · Elements of Information Theory COX · A Handbook of Introductory Statistical Methods *COX · Planning of Experiments CRESSIE · Statistics for Spatial Data, Revised Edition ´´ and HORVÁTH · Limit Theorems in Change Point Analysis CSÖRGO DANIEL · Applications of Statistics to Industrial Experimentation DANIEL · Biostatistics: A Foundation for Analysis in the Health Sciences, Sixth Edition *Now available in a lower priced paperback edition in the Wiley Classics Library.

p&s-cp.qxd

3/25/03

9:47 AM

Page 4

*DANIEL · Fitting Equations to Data: Computer Analysis of Multifactor Data, Second Edition DASU and JOHNSON · Exploratory Data Mining and Data Cleaning DAVID · Order Statistics, Second Edition *DEGROOT, FIENBERG, and KADANE · Statistics and the Law DEL CASTILLO · Statistical Process Adjustment for Quality Control DETTE and STUDDEN · The Theory of Canonical Moments with Applications in Statistics, Probability, and Analysis DEY and MUKERJEE · Fractional Factorial Plans DILLON and GOLDSTEIN · Multivariate Analysis: Methods and Applications DODGE · Alternative Methods of Regression *DODGE and ROMIG · Sampling Inspection Tables, Second Edition *DOOB · Stochastic Processes DOWDY and WEARDEN · Statistics for Research, Second Edition DRAPER and SMITH · Applied Regression Analysis, Third Edition DRYDEN and MARDIA · Statistical Shape Analysis DUDEWICZ and MISHRA · Modern Mathematical Statistics DUNN and CLARK · Applied Statistics: Analysis of Variance and Regression, Second Edition DUNN and CLARK · Basic Statistics: A Primer for the Biomedical Sciences, Third Edition DUPUIS and ELLIS · A Weak Convergence Approach to the Theory of Large Deviations *ELANDT-JOHNSON and JOHNSON · Survival Models and Data Analysis ENDERS · Applied Econometric Time Series ETHIER and KURTZ · Markov Processes: Characterization and Convergence EVANS, HASTINGS, and PEACOCK · Statistical Distributions, Third Edition FELLER · An Introduction to Probability Theory and Its Applications, Volume I, Third Edition, Revised; Volume II, Second Edition FISHER and VAN BELLE · Biostatistics: A Methodology for the Health Sciences *FLEISS · The Design and Analysis of Clinical Experiments FLEISS · Statistical Methods for Rates and Proportions, Second Edition FLEMING and HARRINGTON · Counting Processes and Survival Analysis FULLER · Introduction to Statistical Time Series, Second Edition FULLER · Measurement Error Models GALLANT · Nonlinear Statistical Models GHOSH, MUKHOPADHYAY, and SEN · Sequential Estimation GIFI · Nonlinear Multivariate Analysis GLASSERMAN and YAO · Monotone Structure in Discrete-Event Systems GNANADESIKAN · Methods for Statistical Data Analysis of Multivariate Observations, Second Edition GOLDSTEIN and LEWIS · Assessment: Problems, Development, and Statistical Issues GREENWOOD and NIKULIN · A Guide to Chi-Squared Testing GROSS and HARRIS · Fundamentals of Queueing Theory, Third Edition *HAHN and SHAPIRO · Statistical Models in Engineering HAHN and MEEKER · Statistical Intervals: A Guide for Practitioners HALD · A History of Probability and Statistics and their Applications Before 1750 HALD · A History of Mathematical Statistics from 1750 to 1930 HAMPEL · Robust Statistics: The Approach Based on Influence Functions HANNAN and DEISTLER · The Statistical Theory of Linear Systems HEIBERGER · Computation for the Analysis of Designed Experiments HEDAYAT and SINHA · Design and Inference in Finite Population Sampling HELLER · MACSYMA for Statisticians HINKELMAN and KEMPTHORNE: · Design and Analysis of Experiments, Volume 1: Introduction to Experimental Design *Now available in a lower priced paperback edition in the Wiley Classics Library.

p&s-cp.qxd

3/25/03

9:47 AM

Page 5

HOAGLIN, MOSTELLER, and TUKEY · Exploratory Approach to Analysis of Variance HOAGLIN, MOSTELLER, and TUKEY · Exploring Data Tables, Trends and Shapes *HOAGLIN, MOSTELLER, and TUKEY · Understanding Robust and Exploratory Data Analysis HOCHBERG and TAMHANE · Multiple Comparison Procedures HOCKING · Methods and Applications of Linear Models: Regression and the Analysis of Variance, Second Edition HOEL · Introduction to Mathematical Statistics, Fifth Edition HOGG and KLUGMAN · Loss Distributions HOLLANDER and WOLFE · Nonparametric Statistical Methods, Second Edition HOSMER and LEMESHOW · Applied Logistic Regression, Second Edition HOSMER and LEMESHOW · Applied Survival Analysis: Regression Modeling of Time to Event Data HØYLAND and RAUSAND · System Reliability Theory: Models and Statistical Methods HUBER · Robust Statistics HUBERTY · Applied Discriminant Analysis HUNT and KENNEDY · Financial Derivatives in Theory and Practice HUSKOVA, BERAN, and DUPAC · Collected Works of Jaroslav Hajek— with Commentary IMAN and CONOVER · A Modern Approach to Statistics JACKSON · A User’s Guide to Principle Components JOHN · Statistical Methods in Engineering and Quality Assurance JOHNSON · Multivariate Statistical Simulation JOHNSON and BALAKRISHNAN · Advances in the Theory and Practice of Statistics: A Volume in Honor of Samuel Kotz JUDGE, GRIFFITHS, HILL, LÜTKEPOHL, and LEE · The Theory and Practice of Econometrics, Second Edition JOHNSON and KOTZ · Distributions in Statistics JOHNSON and KOTZ (editors) · Leading Personalities in Statistical Sciences: From the Seventeenth Century to the Present JOHNSON, KOTZ, and BALAKRISHNAN · Continuous Univariate Distributions, Volume 1, Second Edition JOHNSON, KOTZ, and BALAKRISHNAN · Continuous Univariate Distributions, Volume 2, Second Edition JOHNSON, KOTZ, and BALAKRISHNAN · Discrete Multivariate Distributions JOHNSON, KOTZ, and KEMP · Univariate Discrete Distributions, Second Edition JUREC KOVÁ and SEN · Robust Statistical Procedures: Aymptotics and Interrelations JUREK and MASON · Operator-Limit Distributions in Probability Theory KADANE · Bayesian Methods and Ethics in a Clinical Trial Design KADANE AND SCHUM · A Probabilistic Analysis of the Sacco and Vanzetti Evidence KALBFLEISCH and PRENTICE · The Statistical Analysis of Failure Time Data, Second Edition KASS and VOS · Geometrical Foundations of Asymptotic Inference KAUFMAN and ROUSSEEUW · Finding Groups in Data: An Introduction to Cluster Analysis KEDEM and FOKIANOS · Regression Models for Time Series Analysis KENDALL, BARDEN, CARNE, and LE · Shape and Shape Theory KHURI · Advanced Calculus with Applications in Statistics, Second Edition KHURI, MATHEW, and SINHA · Statistical Tests for Mixed Linear Models KLUGMAN, PANJER, and WILLMOT · Loss Models: From Data to Decisions KLUGMAN, PANJER, and WILLMOT · Solutions Manual to Accompany Loss Models: From Data to Decisions

*Now available in a lower priced paperback edition in the Wiley Classics Library.

p&s-cp.qxd

3/25/03

9:47 AM

Page 6

KOTZ, BALAKRISHNAN, and JOHNSON · Continuous Multivariate Distributions, Volume 1, Second Edition KOTZ and JOHNSON (editors) · Encyclopedia of Statistical Sciences: Volumes 1 to 9 with Index KOTZ and JOHNSON (editors) · Encyclopedia of Statistical Sciences: Supplement Volume KOTZ, READ, and BANKS (editors) · Encyclopedia of Statistical Sciences: Update Volume 1 KOTZ, READ, and BANKS (editors) · Encyclopedia of Statistical Sciences: Update Volume 2 KOVALENKO, KUZNETZOV, and PEGG · Mathematical Theory of Reliability of Time-Dependent Systems with Practical Applications LACHIN · Biostatistical Methods: The Assessment of Relative Risks LAD · Operational Subjective Statistical Methods: A Mathematical, Philosophical, and Historical Introduction LAMPERTI · Probability: A Survey of the Mathematical Theory, Second Edition LANGE, RYAN, BILLARD, BRILLINGER, CONQUEST, and GREENHOUSE · Case Studies in Biometry LARSON · Introduction to Probability Theory and Statistical Inference, Third Edition LAWLESS · Statistical Models and Methods for Lifetime Data, Second Edition LAWSON · Statistical Methods in Spatial Epidemiology LE · Applied Categorical Data Analysis LE · Applied Survival Analysis LEE and WANG · Statistical Methods for Survival Data Analysis, Third Edition LEPAGE and BILLARD · Exploring the Limits of Bootstrap LEYLAND and GOLDSTEIN (editors) · Multilevel Modelling of Health Statistics LIAO · Statistical Group Comparison LINDVALL · Lectures on the Coupling Method LINHART and ZUCCHINI · Model Selection LITTLE and RUBIN · Statistical Analysis with Missing Data, Second Edition LLOYD · The Statistical Analysis of Categorical Data MAGNUS and NEUDECKER · Matrix Differential Calculus with Applications in Statistics and Econometrics, Revised Edition MALLER and ZHOU · Survival Analysis with Long Term Survivors MALLOWS · Design, Data, and Analysis by Some Friends of Cuthbert Daniel MANN, SCHAFER, and SINGPURWALLA · Methods for Statistical Analysis of Reliability and Life Data MANTON, WOODBURY, and TOLLEY · Statistical Applications Using Fuzzy Sets MARDIA and JUPP · Directional Statistics MASON, GUNST, and HESS · Statistical Design and Analysis of Experiments with Applications to Engineering and Science, Second Edition McCULLOCH and SEARLE · Generalized, Linear, and Mixed Models McFADDEN · Management of Data in Clinical Trials McLACHLAN · Discriminant Analysis and Statistical Pattern Recognition McLACHLAN and KRISHNAN · The EM Algorithm and Extensions McLACHLAN and PEEL · Finite Mixture Models McNEIL · Epidemiological Research Methods MEEKER and ESCOBAR · Statistical Methods for Reliability Data MEERSCHAERT and SCHEFFLER · Limit Distributions for Sums of Independent Random Vectors: Heavy Tails in Theory and Practice *MILLER · Survival Analysis, Second Edition MONTGOMERY, PECK, and VINING · Introduction to Linear Regression Analysis, Third Edition MORGENTHALER and TUKEY · Configural Polysampling: A Route to Practical Robustness *Now available in a lower priced paperback edition in the Wiley Classics Library.

p&s-cp.qxd

3/25/03

9:47 AM

Page 7

MUIRHEAD · Aspects of Multivariate Statistical Theory MURRAY · X-STAT 2.0 Statistical Experimentation, Design Data Analysis, and Nonlinear Optimization MYERS and MONTGOMERY · Response Surface Methodology: Process and Product Optimization Using Designed Experiments, Second Edition MYERS, MONTGOMERY, and VINING · Generalized Linear Models. With Applications in Engineering and the Sciences NELSON · Accelerated Testing, Statistical Models, Test Plans, and Data Analyses NELSON · Applied Life Data Analysis NEWMAN · Biostatistical Methods in Epidemiology OCHI · Applied Probability and Stochastic Processes in Engineering and Physical Sciences OKABE, BOOTS, SUGIHARA, and CHIU · Spatial Tesselations: Concepts and Applications of Voronoi Diagrams, Second Edition OLIVER and SMITH · Influence Diagrams, Belief Nets and Decision Analysis PANKRATZ · Forecasting with Dynamic Regression Models PANKRATZ · Forecasting with Univariate Box-Jenkins Models: Concepts and Cases *PARZEN · Modern Probability Theory and Its Applications PEÑA, TIAO, and TSAY · A Course in Time Series Analysis PIANTADOSI · Clinical Trials: A Methodologic Perspective PORT · Theoretical Probability for Applications POURAHMADI · Foundations of Time Series Analysis and Prediction Theory PRESS · Bayesian Statistics: Principles, Models, and Applications PRESS · Subjective and Objective Bayesian Statistics, Second Edition PRESS and TANUR · The Subjectivity of Scientists and the Bayesian Approach PUKELSHEIM · Optimal Experimental Design PURI, VILAPLANA, and WERTZ · New Perspectives in Theoretical and Applied Statistics PUTERMAN · Markov Decision Processes: Discrete Stochastic Dynamic Programming *RAO · Linear Statistical Inference and Its Applications, Second Edition RENCHER · Linear Models in Statistics RENCHER · Methods of Multivariate Analysis, Second Edition RENCHER · Multivariate Statistical Inference with Applications RIPLEY · Spatial Statistics RIPLEY · Stochastic Simulation ROBINSON · Practical Strategies for Experimenting ROHATGI and SALEH · An Introduction to Probability and Statistics, Second Edition ROLSKI, SCHMIDLI, SCHMIDT, and TEUGELS · Stochastic Processes for Insurance and Finance ROSENBERGER and LACHIN · Randomization in Clinical Trials: Theory and Practice ROSS · Introduction to Probability and Statistics for Engineers and Scientists ROUSSEEUW and LEROY · Robust Regression and Outlier Detection RUBIN · Multiple Imputation for Nonresponse in Surveys RUBINSTEIN · Simulation and the Monte Carlo Method RUBINSTEIN and MELAMED · Modern Simulation and Modeling RYAN · Modern Regression Methods RYAN · Statistical Methods for Quality Improvement, Second Edition SALTELLI, CHAN, and SCOTT (editors) · Sensitivity Analysis *SCHEFFE · The Analysis of Variance SCHIMEK · Smoothing and Regression: Approaches, Computation, and Application SCHOTT · Matrix Analysis for Statistics SCHUSS · Theory and Applications of Stochastic Differential Equations SCOTT · Multivariate Density Estimation: Theory, Practice, and Visualization *SEARLE · Linear Models SEARLE · Linear Models for Unbalanced Data *Now available in a lower priced paperback edition in the Wiley Classics Library.

p&s-cp.qxd

3/25/03

9:47 AM

Page 8

SEARLE · Matrix Algebra Useful for Statistics SEARLE, CASELLA, and McCULLOCH · Variance Components SEARLE and WILLETT · Matrix Algebra for Applied Economics SEBER and LEE · Linear Regression Analysis, Second Edition SEBER · Multivariate Observations SEBER and WILD · Nonlinear Regression SENNOTT · Stochastic Dynamic Programming and the Control of Queueing Systems *SERFLING · Approximation Theorems of Mathematical Statistics SHAFER and VOVK · Probability and Finance: It’s Only a Game! SMALL and MCLEISH · Hilbert Space Methods in Probability and Statistical Inference SRIVASTAVA · Methods of Multivariate Statistics STAPLETON · Linear Statistical Models STAUDTE and SHEATHER · Robust Estimation and Testing STOYAN, KENDALL, and MECKE · Stochastic Geometry and Its Applications, Second Edition STOYAN and STOYAN · Fractals, Random Shapes and Point Fields: Methods of Geometrical Statistics STYAN · The Collected Papers of T. W. Anderson: 1943–1985 SUTTON, ABRAMS, JONES, SHELDON, and SONG · Methods for Meta-Analysis in Medical Research TANAKA · Time Series Analysis: Nonstationary and Noninvertible Distribution Theory THOMPSON · Empirical Model Building THOMPSON · Sampling, Second Edition THOMPSON · Simulation: A Modeler’s Approach THOMPSON and SEBER · Adaptive Sampling THOMPSON, WILLIAMS, and FINDLAY · Models for Investors in Real World Markets TIAO, BISGAARD, HILL, PEÑA, and STIGLER (editors) · Box on Quality and Discovery: with Design, Control, and Robustness TIERNEY · LISP-STAT: An Object-Oriented Environment for Statistical Computing and Dynamic Graphics TSAY · Analysis of Financial Time Series UPTON and FINGLETON · Spatial Data Analysis by Example, Volume II: Categorical and Directional Data VAN BELLE · Statistical Rules of Thumb VIDAKOVIC · Statistical Modeling by Wavelets WEISBERG · Applied Linear Regression, Second Edition WELSH · Aspects of Statistical Inference WESTFALL and YOUNG · Resampling-Based Multiple Testing: Examples and Methods for p-Value Adjustment WHITTAKER · Graphical Models in Applied Multivariate Statistics WINKER · Optimization Heuristics in Economics: Applications of Threshold Accepting WONNACOTT and WONNACOTT · Econometrics, Second Edition WOODING · Planning Pharmaceutical Clinical Trials: Basic Statistical Principles WOOLSON and CLARKE · Statistical Methods for the Analysis of Biomedical Data, Second Edition WU and HAMADA · Experiments: Planning, Analysis, and Parameter Design Optimization YANG · The Construction Theory of Denumerable Markov Processes *ZELLNER · An Introduction to Bayesian Inference in Econometrics ZHOU, OBUCHOWSKI, and MCCLISH · Statistical Methods in Diagnostic Medicine

*Now available in a lower priced paperback edition in the Wiley Classics Library.

Statistical Methods for Survival Data Analysis, Third Edition (Wiley Series in Probability and Statistics)

Statistical Models and Methods for Lifetime Data, Second Edition (Wiley Series in Probability and Statistics)

Statistics for Spatial Data (Wiley Series in Probability and Statistics)

Statistical Shape Analysis (Wiley Series in Probability and Statistics)