Thermoset Resins for Composites: Directory and Databook

I -THERMOSET RESINS FOR COMPOSITES I

SECOND EDITION

Trevor Starr C Eng FIM FBlM Mary Starr TECHNOLEX Consulting Engineers in Composites Technology Crewkerne Somerset TA18 7AY UK

W O O D H E A DP U B L I S H I N G

LIMITED

Published by Woodhead Publishina Limited Abinaton Hall Abinaton Cambs CBI 6AH UK First edition published (1993) by Elsevier Advanced Technology

ISBN 1 85617 196 5

Second Edition 1998

0 Woodhead Publishing Limited 1998

All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, recording, or any information storage and retrieval system, without permission in writing from the publisher. The publisher makes no representation, express or implied, with regard to the accuracy of the information contained in this book and cannot accept any legal responsibility or liability for any errors or omissions that may be made. The information in this publication was obtained from sources which are believed to be reliable, but no warranty or representation as to its accuracy or completeness is hereby given or implied. Readers should therefore consider the information only as a supplement or guide for the purposes of research. It is recommended that they seek further more complete information from the named manufacturers or suppliers and to then undertake independent evaluation as to the suitability of any particular resin system for any particular purpose. At the same time the proper use, disposal, health & safety and protection of the environment implications in the use of the described resins, is outside the jurisdiction of this publication; such advice must be sought from the manufacturer or supplier concerned. British Library Cataloguing in Publication Data. A catalogue record for this book is available from the British Library. ISBN

1 85573 406 0

Printed in Great Britain by Prestige Print Services, Crewkerne

-

PREFACE THERMOSET RESINS FOR COMPOSITES The matrix of a ‘reinforced plastic’ composites moulding, can be based on either a thermoplastic or thermoset polymer. Although there is a steadily increasing growth in the use of the former, the latter remains predominant. Indeed thermoset resin systems, coupled to glass reinforcement, have for neatly 60 years, been the work-horse of the composites industry. Both polymers are man-made materials, derived principally from coal or crude oil, and are large molecular structures comprised of rings of carbon atoms, linked principally to hydrogen and oxygen atoms and ‘chained’ together with others such as nitrogen, chlorine, sulphur, silicon and fluorine. A complex cross-linking of those chains is the backbone of thermosets. So when fully polymerised from the initial liquid to solid state, and unlike the thermoplastics, the thermosets cannot be induced by the action of heat and/or pressure to take up fresh shapes or be returned to mobile viscous liquids. That timetemperature dependant change into a irreversible solid state, promoted by chemical action, is the essential difference between the two polymers. That leads to other clear property distinctions, and those are in turn employed to advantage in respect of the variety of processing techniques open to the thermoset composites moulding fabricator, in satisfying a wide-ranging market application. As a consequence, thermoset resin selection to ensure optimum costeffective component performance, demands careful comparison of the many high-quality competitive systems now available. Following from that, there was a need for a comprehensive volume to permit that rapid comparison.

This second edition, built on the success of the first, has become necessary as a result of the continuing development of the world-wide composites industry. This has included, the entry of new companies, new and improved thermoset resin systems and moreover major and important changes in the whole manufacturer/supplier picture, since the first edition was published in 1993. Whilst retaining the comprehensive contact listing of all those companies in an initial directory section together with some basic understanding of thermoset chemistry, a change in the layout of the second part, has not only allowed more resin description and property tabulation within that databook section, but also a much more reader friendly, useful layout.

iii

Preface Contents Listing Glossary of Terms Index of Trade Names

iii iv vi viii

PART ONE : DIRECTORY

MANUFACTURERS, AGENTS, SUPPLIERS & DISTRIBUTORS CONTACT DETAILS Address, telephone, fax and email numbers

3 13

PART TWO : DATABOOK

THERMOSET RESINS

-

A REVIEW

41

COMPREHENSIVE INDEX : PRODUCT TYPE, MANUFACTURER & PAGE LOCATION

43

DATABOOK : KEY TO TABULATED PROPERTIES

71

DATABOOK : A : ADHESIVES

73

B : FLOWCOATS, TOPCOATS & SURFACE COATS

85

C : GELCOATS & IN-MOULD COATINGS C1 Bisphenol-A, Epoxide & Vinyl Ester Based C2 In-mould Coatings C3 Smoothing Coats for Phenolic Composites C4 Tooling, Product Repair & Associated C5 Unsaturated Polyester Based C6 Polyurethane Based

93 95 95 97 97

D : MATRIX RESINS FOR LAMINATING & ASSOCIATED PURPOSES D1 Acrylic Based D2 Bismateimide Based D3 Bisphenol-A, Epoxide, Vinyl & Cyanate Ester and Furmaric Acid Based D4 Hybrid Systems 05 Phenolic Based D6 Polyurethane Based & RIM/RRIM/SRIM Resins D7 Furane Based 08 Unsaturated Polyester Based

iv

100 114 115 119 120 120 144 145 148 151 151

E : THERMOSET RESINS FOR POLYMER CONCRETE, CULTURED MARBLE, ONYX & ASSOCIATED FILLED APPLICATIONS

237

F : FORMULATED SURFACING PASTES, PUTTIES & FILLER PASTES

255

G : RESIN SYSTEMS FOR G1 Adhesive Manufacture Casting, Encapsulation and Decorative Items G2 G3 Gelcoat Manufacture Pigment Paste Manufacture and Associated G4 Putty and Filler Paste Manufacture G5 G6 SMC & BMC Manufacture G7 Tooling Laminates G8 Unclassified Use

263 267 269 274 277 279 283 292 295

H : SUNDRY THERMOSET RESIN APPLICATIONS H1 Flexibilising Resins H2 For Laminating and Bonding Glass H3 Primers H4 Saturated Polyester Resins H5 Unsaturated Polyester Resins for Button Manufacture H6 Unsaturated Polyester Resins for Foaming H7 Unsaturated Polyester Resins for Paper Impregnation H8 Low Profile Additives H9 Print Barriers Thickening and Thixotropic Agents H I0

301 303 306 307 309 309 314 315 315 318 318

H11 H12 I:

Surface & Other Coatings Flooring Resins

318 319

LATE ENTRIES A Adhesives C Gelcoats & In-mould Coatings D Matrix Resins for Laminating & Associated Purposes E Polymer Concrete, Cultured Marble, Onyx & Associated Filled Applications F Fomulated Surfacing Pastes, Putties & Filler Pastes G Unsaturated Polyester or Other Systems H Sundry Applications

-

-

321 323 326 327 333 334 335 338

V

TRADE NAMES As owned or used by the company shown. Additol Ampreg Aquaguard Araldite Armorcote Aropol

Vianova Resins AG SP Systems Ltd A C Hatrick Chemicals Ltd Ciba Specialty Chemicals Cook Composites And Polymers Ashland Chemical Co Huntsman Chemical Co Australia Ltd Arotec Ashland Chemical Co Arotool Huntsman Chemical Co Australia Ltd Arotran Ashland Chemical Co Atlac DSMoBASF Structural Resins Reichhold Chemicals Inc Baydur Bayer Corporation Bayflex Bayer Corporation Baytec Bayer Corporation Beetle BIP Ltd Bond-Cote Hawkeye Industries Inc BR Cytec Engineered Materials BryteCor Brtye Technologies Inc Cellobond Blagdon Cellobond Ltd Chromocoat Nuplex Industries Ltd Polygard Inc Cleargard Copperclad Ferro Plastics Europe Corfil Cytec Engineered Materials Crestomer Scott Bader Co Ltd crystic Scott Bader Co Ltd Huntsman Chemical Co Australia Ltd Cycom Cytec Aerospace Ltd GTI Process Dara Daron DSM*BASF Dow Chemical Co Derakane Dion Reichhold Chemicals Inc Alusuise ltalia Distigel Lonza SPA Alusuise ltalia Distitron Lonza SPA Ditra GTI Process Divilette Diab Group Durabuild Hawkeye Industries Inc Hawk International Distributors Ltd Hawkeye Industries Inc Duratec Hawk International Distributors Ltd Borden Inc Durite Dynopol Norpol Polymer Endyne Cray Valley Envirez Ashland Chemical Co Epibond Ciba Specialty Chemicals Ciba Polymers Epicast Ciba Specialty Chemicals Ciba Polymers Epocast Epon Shell Chemical Company Epophen Borden Chemical UK Ltd Eposeal SP Systems Ltd Eposerts Ciba Polymers Estarez Hunstsman Chemical Co Australia Ltd Fiberglass Fusion INV Plexus Filabond Scott Bader Co Ltd Fireguard Scott Bader Co Ltd Fire PRF2 Borden Inc FM Cytec Engineered Materials Fuli Jiangyin Crabec Synthetic Chemicals Co Ltd GP Georgia-Pacific Resins Inc Glasgrip Ashland Chemical Co

viii

Hibuild Hydropel Impact Impress lsogels K-Lite Kara Lord Lovocor L o w voc Maxguard Metalflake MeUbond Mlcroply Modar Norpol Norsodyne Norsophen Palatal Phencat Polycor Polyflex POlYgriP Polylite Polyrnar Polyrock Prism ProBond Procast Pro-Set Resintiision Resipol Resi-set Resorciphen Ripow Roskydal S'fill Silmar Sirester Skybond Soma Spabond StYPOl Swancor Synolac Synolite Tack'n Roll Trlna Ultra I Ultrachrome Ultraclear Ultracore Ultrapius Ultrashield Ultratooling Ultrathane Uralane Ureol VariMac Viapal Viscovoss Wresipol

SP Systems Ltd AlphdOwens-Corning Lily Industries Inc Ferro (Holland) B V Ferro Corporation Ferro (Holland) B V Diab Group GTI Process Lord Corporation Cook Composites & Polymers Ferro Corporation Ferro Plastics Europe Neste Polyester Inc Polygard Inc Cytec Engineered Materials YLA Inc Ashland Chemical Co Jotun Polymer AS Cray Valley Cray Valley DSMoBASF Structural Resins Blagden Cellobond Ltd Cook Composites & Polymers Naptha Resins & Chemicals Private Ltd Ashland Chemical Co Reichhold Chemicals Inc Marubeni Specialty Chemicals Inc Polydyne Bayer Corporation Diab Group Reichhold Chemicals Inc Gougeon Brothers Inc Ciba Specialty Resisa Georgia-Pacific Resins Inc Borden Inc Showa High Polymer Co Ltd Vosschemie GmbH SP Systems Ltd Huntsman Chemical Co Australia Ltd lnterplastic Corporation SIR lndustriale IST (MA) Corporation GTI Process SP Systems Ltd Cook Composites & Polymers Swancor Industrial Company Ltd Cray Valley DSMaBASF Structural Resins Bryte Technologies Inc GTI Process Ferro Corporation Futura Coatings Inc Ferro Corporation Futura Coatings Inc Ferro Corporation Ferro Corporation Ferro Corporation Futura Coatings Inc Ciba Specialty Chemicals Ciba Specialty Chemicals McWhorter Technologies Vianova Resins AG Vosschemie GmbH Resinous Chemicals Ltd

MANUFACTURERS, AGENTS, SUPPLIERS & DISTRIBUTORS All manufacturers whose products are tabulated within Part Two, Databook, are here listed alphabetically in the left-hand column. To the right and shown by country - together with the Head Office (in bold type), is listed their selling and distribution arrangements (sales office/s, agents, distributors and wholesalers), where advised. It should be noted that several companies shown as distributors, may also be manufacturers in their own right.

-

The full address, telephone and facsimile numbers inclusive of the country dialling code - plus where applicable their electronic number/s, of every company listed in this way, then appears (again in alphabetical order), in the concluding section of this Part One, Directory. The use of brackets thus (2),indicates the number of contact addresses within the same country or under the same name shown within that directory.

A

A C Hatrick Chemicals Ltd Australia New Zealand

A C Hatrick Chemicals U d A C Hatrick (NZ) Ltd Fiber Glass International N.Z. (2)

Adtech CorDoration

USA

Adtech Corporation

Akemi Inc

Canada

AdChem Adhesvies (2) Akemi Inc AdCo Akemi Inc BCL Engineering Inc GLS Fiberglass (13) Graco Supply Hastings Plastics Pontiac Plastics R P Morrison The Houston Co.

USA

AIDha/Owens Corning

USA UK

AlphdOwens Corning (2) Hawk International Distributors Ltd

Alusuisse ltalia SDA

Italy UK

Alusuisse ltalia SPA Maprac (UK) Ltd

Ashland Chemical ComDany Canada Italy Mexico Spain UK USA

Ashland Chemical HisDania Spain

Ashland Chemical Company FRP Supply Inc (5) Ashland Chemical ltaliana FRP Supply Inc (2) Sier SA Ashland Composite Polymers Ltd Ashland Chemical Company (4) Composite Materials Inc (9) FRP Supply Inc (43) Ashland Chemical Hispania

3

Manufacturers, Agents, Suppliers 8, Distributors B

Baver CorDoration

Canada USA

Bayer Inc (2) Bayer Corporation (6)

BIP Ltd

Finland Germany Netherlands UK

Bang & Bonsomer OY Pultex GmbH Firgos RPM BV BIP Ltd PP Composites Vetrotex (UK) Ltd (4)

Blaaden Cellobond Ltd

France Denmark Netherlands Spain UK

COMAIP (Groupe Arnaud) ICOM Composites Buchta Polymers Fehling Downing Blagden Cellobond Ltd Vetrotex (UK) Ltd (4) FRP Services (America) Inc

USA Blaaden Manufactured Chemicals Austria Belgium Denmark France Germany Netherlands Switzerland UK

Pompe-Chemie Handelgesellschaftm.B.H & Co S.A. Socomer A/S Kemitura Keyser 8, Mackay Keyser & Mackay Keyser & Mackay S A Upag AG Blagden Manufactured Chemicals

Borden Chemical UK Ltd UK

Borden Chemical UK Ltd

Borden Inc

USA

Borden Inc

Bwte Technoloaies Inc

USA

Bryte Technologies Inc

C

Ciba Specialty Chemicals Austria France Germany Italy Spain Sweden Switzerland UK USA Cook Composites & Polymers Finland Germany Netherland UK USA

4

Ciba Polymere SA Ciba-Geigy Ciba Polymere Ciba Polymeri Ciba-Geigy SA Ciba-Geigy AB Ciba Polymere B&K Resins Ltd (2) Ciba Specialty Chemicals Ciba Specialty Chemicals (2) Bang & Bonsomer OY Pultex GmbH Firgos RPM BV Vetrotex (UK) Ltd (4) Cook Composites & Polymers (4) Composite Materials Inc (9)

- Manufacturers, Agents, Suppliers & Distributors Crav Valley

UK Germany Netherlands Spain France South Africa

Cvtec Industries Inc

France Germany Italy Spain UK USA

Cray Valley Cray Valley Allemagne Cray Valley Kunsthaize GmbH (2) Cray Valley Benelux Cray Valley lberica Cray Valley S A (4) Cray Valley South Africa S A Cytec Aerospace Ltd Cytec Aerospace Aeroteam Aer.MA.S Srl Ricardo Gomez Gonzalez Cytec Fiberite Ltd Cytec Engineered Materials Inc (2) Cytec Industries Inc

D

Dow Chemical

Australia Canada Mexico Netherlands Switzerland USA

DSMoBASF Structural Resins France Germany Italy Netherlands

Norway Spain Sweden UK Dulux Australia

Dow Chemical (Australia) Ltd Dow Chemical Canada Inc Dow Quimica Mexicana SA de C V Dow Information Centre Dow Europe S A Dow Chemical Company DSM France SA DSMoBASF Structural Resins Deutschland GmbH DSM ltalia Euroresins ltalia srl DSMoBASF Structural Resins DSM Resins bv DSM Resins International bv Euroresins Benelux BV Fiber Kemi A/S DSM EspaAa SA Euroresins SA DSM Scandinavia AB DSM Resins UK Ltd Freeman Distribution Ltd

Australia Fiji New Zealand Papua New Guinea

Dulux Australia (3) IC1 Paints (Fiji) Ltd PJ Hobbs IC1 Dulux Papua New Guinea PTY Ltd (LAE)

Canada

Ferro Corporation Ferro Industrial Products Ltd Ferro-Danmark A/S Ferro Eurostar SA Ferro France SA Ferro Plastics (Germany) GmbH Metal Portuguesa SA Ferro Enamel EspaAola SA Ferro (Great Britain) Ltd Ferro Corporation (2)

F

Ferro CorPoration

Denmark France Germany Portugal Spain UK USA

5

Manufacturers, Agents, Suppliers & Distributors Ferro (Holland) B V

Netherlands

Ferro (Holland) B V

USA

FiberCote Industries Inc

FiberCote Industries Inc Fiberite Inc

France Fiberite Europe GmbH Germany Fiberite Europe GmbH Italy Fiberite Europe GmbH UK Fiberite Europe GmbH USA Fiberite Inc (3) NB. Company acquired by Cytec Industries Inc as this volume went to press. Any company name changes have not been advised. Futura Coatinns Inc

Belgium UK USA

Futura Coatings Europe N.V Ureatech Futura Coatings Inc

G

Georaia-Pacific Resins Inc UK USA

B&K Resins Ltd (2) Georgia-Pacific Resins Inc

Gouaeon Brothers Inc

UK USA

Wessex Resins & Adhesives Ltd Gougeon Brothers Inc

GTI Process

France

GTI Process

Gwil Industries Inc

Canada

Gwil Industries Inc

H

Hawkeve Industries Inc UK USA

Hawk International Distributors Ltd Composite Materials Inc (9) Hawkeye Industries Inc

Hawk International Distributors Ltd UK

Hawk International Distributors Ltd

Hepworth Minerals & Chemicals Ltd UK

Hepworth Minerals 8 Chemicals Ltd

HK Research Corporation UK USA

PP Composites HK Research Corporation

Huntsman Chemical Co Australia Ltd Australia

Huntsman Chemical Co Australia Ltd (6) Synthetic Resins (6)

I

Interplastic Corporation UK USA

PP Composites lnterplastic Corporation (3)

ITW Plexus

ITW Plexus Europe ITW Plexus (2)

6

UK USA

- Manufacturers,Agents, Suppliers & Distributors J

Jiannvin Crabec Svnthetic Chemicals Co Ltd Jiangyin Crabec Synthetic Chemicals Co Ltd Hong Kong Jiangyin Crabec Synthetic Chemicals Co Ltd PR China Enterprise Agency International Ltd UK A.C. Hatrick Chemicals Pty Ltd H. Gattinger GmbH Resana Participaq6es S/A Intercommerce Export-Import d .o.o Evata Plastic Enterprises Jotun Spolchemie a s Jotun Danmark AIS A/S TopPlast Jotun Polymer France S A Oy Jotun Scanpol AB Jotun (Deutschland) GmbH C. Chronis SA Jotun Polymer Hungary Kft Batagerdin Samtak HF Corcoran Chemicals Ltd Kidron Plastics Ltd Jotun ltoc Srl Crown Fibreglass Works Jotun B V A.C. Hatrick (NZ) Ltd Jotun Polymer AS Reja Spolka z0.0 Brenntag Portugal Lda Altair Ltd Norpol Polymer Pte Ltd Plastima Vereguard (PTY) Ltd lndukern S A Yatlantico S A (For Canary Islands) Sweden Jotun Sverige AB Switzerland A H Meyer & Cie AG Tunisia Trimex Sarl Turkey Jotun Boya San.ve Ticaret A.S. UAE Jotun Polymer loc UK Jotun Polymer (UK) Ltd PP Composites NB. Company acquired by Reichhold Chemicals Inc. Any name changes not advised.

Jotun Polvmer AS

Australia Austria Brazil Croatia Cyprus Czech Republic Denmark Estonia France Finland Germany Greece Hungary Iceland Ireland Israel Italy Malta Netherlands New Zealand Norway Poland Portugal Russia Singapore Slovak Republic South Africa Spain

L

Lillv Industries Inc

USA

Lilly Industries Inc (3)

Llewellvn Rvland Ltd

UK

Llewellyn Ryland Ltd

Lonza SDA

Czech Republic France Germany

Lonza Biotec sro Lonza France Sarl Lonza GmbH Duroform J Fritz GmbH & Co KG Lonza Hongkong Ltd Lonza Ltd Lonza Ltd Lonza SPA Molding Compounds SPA

Hong Kong Hungary India Italy continued:

7

Manufacturers, Agents, Suppliers & Distributors Lonza SPA - continued: Japan Netherlands Poland Russia Singapore Spain Switzerland UK USA

Reglar Srl Resinmec SPA Lonza Japan Ltd Lonza Benelux BV Alusuisse-Lonza Services Ltd Alusuisse-Lonza Holding Ltd Lonza Representative Office Lonza lb6rica SA Lonza Ltd Lonza UK Ltd Lonza Biologics plc Lonza Biologics Inc Lonza Inc

M Marubeni SDecialtv Chemicals Inc USA

Marubeni Specialty Chemicals Inc

McWhorter Technolonies

Miles Inc

USA

McWhorter Technologies (4)

USA

Miles Inc (6)

N Naptha Resins and Chemicals Private Ltd India Neste

Belgium Canada China Czech Republic Denmark Estonia Finland

France Germany Hong Kong Italy Japan Netherlands Norway Poland Russia Singapore Spain Sweden UK USA

8

Naptha Resins and Chemicals Private Ltd (1 2) Neste Chemicals Belgium Neste Resins Canada NCT Hong Kong Ltd Neste Oy Chemicals Neste Kemi Danmark Als Neste Chemicals Eesti AS Neste Oy Chemicals Neste Polyester Europe Neste Polyester Finland Neste Resins Oy Neste Chimie France SNC Neste Polyester S.A. Neste Chemicals GmbH Neste Chemicals South East Asia Ltd Neste Chemicals ltalia SRL Neste Chemicals Japan Co Neste Chemicals Benelux Holding B.V. Neste Resins B.V. Neste Kjemi Norge AIS Neste Chemicals Neste Chemicals Neste Singapore Holdings Neste Chemicals lberica S L Neste Chemicals Scandinavia Neste Chemicals UK Ltd Neste Chemicals Holding Inc Neste Polyester Inc Neste Resins Corporation

- Manufacturers, Agents, Suppliers & Distributors Norpol Polymer PTE Ltd Malaysia Singapore

KL Representative Office Norpol Polymer PTE Ltd

New Zealand

Nuplex Industries Ltd

Permabond

France Germany UK

Permabond Permabond Permabond

Polvdvne Inc

USA

Polydyne Inc

Austria Canada

Reichhold Chemie GmbH FRP Supply Inc Plastics Maritime Progress Plastics & Compounds Progress Plastiques Reichhold Ltd United Fibreglass Reichhold Chimie S A Reichhold Chemie GmbH Reichhold ltalia Reichhold Chemie AG PP Composites ACME Distributors Advanced Plastics (4) Composite Materials Inc (9) CMI CMI (Fasco) FRP Supply (2) Fib-Chem SPA Fiberglass of Hawaii GLS Corporation (5) General Fiberglass (13) George C Brandt Gulf Coast Resins Idaho Chemical Industries Polyguard Reichhold Chemicals Inc (6) Seeman Fiberglass Sun Coast Resins Tacoma Fiberglass

Nuplex Industries Ltd

P

R Reichhold Chemicals Inc

France Germany Italy Switzerland UK USA

Resinous Chemicals Ltd UK

Resinous Chemicals Ltd

Resin Services Inc

USA

De-Comp Composites Inc. Resin Services Inc

Resisa

Spain

Resisa (4)

Robnor Resins

UK

Robnor Resins

9

Manufacturers, Agents, Suppliers & Distributors S

Saudi Industrial Resins Ltd Saudi Arabia Scott Bader Co Ltd

Saudi Industrial Resins Ltd

France

Scott Bader SA Scott Composites EURL Stradour Industries EURL Strand Glass SA Republic of Ireland Scott Bader Co Ltd Sweden Neidert Strand AB UK Scott Bader Co Ltd (8) USA Scott Bader Inc

Shell Chemical Company USA Showa Hiahpolymer Co Ltd France Japan Singapore USA

Shell Chemical Company Pecten Chemicals Inc (Sales outside the USA)

FRP Services Europe Sarl FRP Services & Company Showa Highpolymer Co Ltd (2) FRP Services & Company FRP Services & Co (America) Ltd

Sinaapore Hiahpolvmer Chemical Products Pte Ltd Singapore Asterix Chemicals Pte Ltd Singapore Highpolymer Chemical Products Pte Ltd Sirca SDA

Italy

Sirca SPA

SIR lndustriale

Italy

SIR lndustriale

SP Systems Ltd North Sails SA SP Systems Australia Ltd Divinycell Products Alkaeos Petrides Ltd Lars Hallkvist APS Kevra Oy AGL Aviation Sarl DlAB - Polimex France Etablissements Charles SP Systems Composit Technologie Germany Neo Marine Ltd Greece XL Yachts Hungary HF Dorna Iran Texma Machinery Ltd Israel G Angeloni Srl Italy F LLI Mugnaini Srl RLR Ltd Malta Jan Dekker Epoxysystemen Netherlands Merrem & La Porte BV Netherland Antilles Budget Marine NV SP Systems New Zealand Ltd New Zealand Divinycell International N S Norway Decatlo LDA Portugal AMT (PTY) Ltd South Africa Anfer Composites S.L Spain Color Mari S.L

Argentina AustraIia Brazil Cyprus Denmark Finland France

10

- Manufacturers,Agents, Suppliers & Distributors Spain

Sweden

Turkey UK Swancor Industrial Corporation Ltd Australia China India

C Fontanals SA Gamma Tensor SL Glaspol Composites SL Javier Pujol Plainsur SA Byggplast 81Batprylar Divinycell International Ltd Erlandsons Brygga AB Pondus Snickeri Kompozit Marin Turizm Sanayi Liber Turizm TIC Ltd STI SP Systems Ltd SP Technologies

USA

Clariant (Australia) Pty Ltd Prior New Material Ltd Asia Business Network Rasayan Vitrak S K Sales Private Ltd Prior Chemical Industries (M) AND BHD Prior Company (Singapore) Pte Ltd Prior Chemical Industries (Thailand) Co Ltd Wah Tech Industrial Co Ltd Swancor Industrial Corporation Ltd Applied Technology Trading Maroof Trading Company L L C Tectra Inc

USA

Tool Chemical Co Inc

Vianova Resins AG

Austria

Vianova Resins AG (3)

Vosschemie GmbH

Austria Belgium Denmark France Germany

Vosschemie Vosschemie New Systems Gel-Top A/S Soloplast S.A. Vosschemie Bleier & Voss oHG Vosschemie GmbH (5) Romar-Voss KG C. Fontanals S.A. Anwander & Co. Ltd Klinger Kunststoffe Bondaglass-Voss Ltd

Malaysia Singapore Thailand Taiwan UAE

T

Tool Chemical Co. Inc V

Netherlands Spain Switzerland UK Wessex Resins 8I Adhesives Ltd Cyprus Denmark Finland France Germany Greece Hungary Israel Italy continued:

A & F Marine Services Ltd H F Marine Bang & Bonsomer Oy Boero Colori France M.uH von der Linden GmbH Delos Co Ltd Nautik Boat G.M Swell Marketing 8I Services Ltd Boero Colori S.R.L I1

Manufacturers, Agents, Suppliers & Distributors -

-

Wessex Resins & Adhesives Ltd continued: Lebanon Malta Netherlands Noway Portugal South Africa Spain Sweden Switzerland Turkey UAE Republic of Ireland UK

12

Bardawil & Co Epoxy Resins Tech. Ltd ECM bv West Systems Norge AIS Sailing Boutique Nautica Exaton Composites (PTY) Ltd Pinmar SA Armatech Werder Systems A.R.C. Pazarlama ve Makina Tic. A.S. Marine & Elect. Supplies Co. LLC Waller & Wickham Wessex Resins & Adhesives Ltd

CONTACT DETAILS A C Hatrick Chemicals Ltd 49 Stephen Road Botany New South Wales 2019 Tel: +61 2 66 60 331

A C Hatrick (NZ) Ltd PO Box 2359 Auckland Tel: +64 9 32 695

AUSTRALIA

Fax: +61 2 66 63 872

NEW ZEALAND Fax: +64 9 88 10 66

Aeroteam C.SO Duca Decci Abruui 62 10129 Torino Tel: +39 11 580 7925

A 8, F Marine Services Ltd 10 Odysseas Antroytsos Str PO Box 335 6303 Larnaca Tel: +357 4 636 377

ACME Distributors Oklahoma & Texas

USA

Freephone 800 344 ACME

AdChem Adhesives Mississaugua Ontario

CANADA

& Montreal, Quebec Tel: +I 514 337 7534

AdCo Upland CA Tel: +I 909 931 1838

Advanced Plastics Inc 4349 Gitwell Road Memphis TN 38118 Tel: +I 901 365 4848 Advanced Plastics Inc 7360 Cockrill Bend Blvd. Nashville TN 37209-1024 Tel: +I 615 350 6500

FRANCE Fax: +33 4934 77468

Akemi Inc Mississauga Ontario

CANADA

Tel: +I 905 812 8617 Free phone: 800 365 8191

USA

Adtech Corporation Plastic Systems P.O. Box F Charlotte USA Michigan 48813 Fax: +I 517 543 6787 Tel: +I 517 543 7510 Technical Support Tel: I 800 255 9934 Advanced Plastics Inc 127 Sherlake Road Knoxville TN 37922 Tel: +I 615 690 0915

CYPRUS

Fax: +357 4 663 232

AGL Aviation Srl Av. Du Centre 4 06150 Cannes La Bocca Tel: +33 4030 06011

Tel: +I519 622 2320

ITALY Fax: +39 11 578 3175

Akemi Inc 5265 S. Clinton Trail Eaton Rapids MI 48827 Tel: +I 517 663 8191

USA +I 517 663 5035

Freephone: 1 800 365 8191

Alkaeos Petrides Ltd Alkaeonis Building Flat 21-22 loannou Marsellou 3 Post Box 550 Larnarca Tel: +357 465 5077

USA

Fax:

CYPRUS Fax: +357 4655088

A L Kilgo Company 180 Sand Island Road Honolulu HI 96817

USA

Tel: +I 808 847 4211

USA

Alphalowens Corning 950 Highway 57 East Collielville TN 38017 Tel: +I 901 854 2800

Fax:

USA +I 901 854 1183

Tel: +I 615 350 6500

Alphalowens Corning International /Export Office 9100 South Dadeland Boulevard Suite 514 Miami FL 33156 USA Tel: + I 305 670 80 34 Fax: +I 305 670 78 04

Aer.Ma.S Drl Via GL Bernini 58 80129 Napoli

ITALY

Tel: +39 81 578 8422

Altair Ltd Petrovskaia kosa 7 St. Petersburg

Fax: +39 81 578 3175

Tel: +7 812 23 55 095

USA

Freephone: 800 321 8281

Advanced Plastics Inc Ala bamha, Arkansas,Mississippi USA

RUSSIA Fax: +7 812 23 57 067

13

Contact Details Alusuisse ltalia SPA Via Vittor Pisani 31 20124 MILAN0

-

ITALY

Tel: +39 2 669 99 1 Fax: +39 2 669 87.630

Alusuisse-Lonza Holding Ltd Representation Office Ulitsa Usacheva 35 RUS-MOSCOW 119048 RUSSIA Tel: +7 95 245 50 42

Fax: +7 95 244 29 66

Alusuisse-Lonza Services Ltd Representation Office ul. Smolenskiego 4 m 15 PL-01-698 Warsaw POLAND Tel: +48 22 33 87 45

AMT (PTY)Ltd PO Box 751485 Gardenview 2047 Tel: +27 11392 4232

Anfer Composites S.L C/Murillo EDF Murillo S/No (Bajo) 03710 Calpe (Alicante)

SOUTH AFRICA Fax: +27 11974 4198

SPAIN

ITALY

SWITZERLAND Fax: +4I I 730 4502

Applied Technology Trading P.O. Box 60071 Dubai UAE Fax: +9716 342 334

A.R.C. Pazarlama ve Makina Tic. A S Tersaneler Caddesi Gecici 50. Sok. Ozek Is Merkezi D4 81700 Tuzla Istanbul TURKEY

Tel: +46 8 716 9199

Fax: +90 216 3929962

14

USA

Composite Polymers Division Tel: + I 614 790 4191

Fax: + I 614 790 3735

Ashland Chemical Company 6608 E 26th Street Los Angeles USA CA 90040 Tel: +I 213 724 2440 Ashland Chemical Company 2801 South Delaware Avenue Philadelphia PA 19148 USA Tel: + I 215 336 6500

Ashland Chemical Hispania Benicarlo SPAIN Tel: +34 64 471 316

SWEDEN Fax: +46 8 716 9159

Fax: + I 905 823 5293

Fax: +34 64 473 607

Ashland Chemical ltaliana European Headquarters Composites Polymers Division Via Giacomo Watt 42 29143 Milano ITALY Tel: +39 2 891 24706

Fax: +39 2 891 22717

Ashland Composite Polymers Ltd Vale Industrial Estate Kidderminster D Y l l 7QP UK Tel: +44 1562 825 555

Ashland Chemical Company 2620 Royal Windsor Drive Missassauga Ontario L5J 4E7 CANADA Tek + 1 905 823 1800

Web: http://www.ashchem.com

Tel: 800/322 6580

Anwander + Co AG GoldschliigistraBe 16 CH-Schlieren Tel: +4I I 730 4050

Armatech Box 158 Finntorpsvagen 7 131 08 Nacka

Toll Free: 1 888 ASHCHEM E-mail: [email protected]

Specialty Polymers & Adhesives Division

Fax: +39 41 974 236

Tel: +90 216 493 1306

Ashland Chemical Company Division of Ashland Chemical Inc 5200 Blazer Parkway Dublin Columbus OH 43017 USA Tel: +I 614 790 3333 Fax: + I 614 790 6157

Mail address: PO Box 2219 Columbus OH 43216

Tel: +39 41 974 166

Tel: +971 6 341 555

Tel: + I 216 998 7072

Fax: +48 22 33 12 39

T e F a x : +34 347 43027

G Angeloni Srl Galleria Matteotti 2 30174 Mestre (VE)

Ashland Chemical Company 4501 Benefit Avenue Ashtabula OH 44044 USA

Asia Business Network Regd. Office A-4 Jayville Society Linking Road Santacruz (West) Mumbai 400 054 Tel: +91 22 648 2719

Fax: +44 1562 865 a03

INDIA Fax: 91 22 834 1442

- Blagden Manufactured Chemicals Asterix Chemicals Pte Ltd 20 Bideford Road #07-00 Wellington Building Singapore 229921 Tel: +65 235 2377

Bang & Bonsomer OY PO Box 93 FIN-00211 Helsinki Tel: +358 968 1081

FINLAND Fax: +358 96924174

LEBANON Fax: +96 11 884 187

Bategerdin Samtak HF P.O. Box 186 IS-220 Hafnarfjordur Tel: +354 5 65 16 70

Tel: +I 810475 7700

Bayer Corporation Polymer Division Raritan Plaza I l l Edison NJ 08837-3605 Tel: + I 908 225 1030

Bayer Corporation Polymer Division 9801 W. Higgins Road Suite 420 Rosemont IL 60018-4704 Tel: + 1 847 692 5560

CANADA

Fax: + I 514 697 5334

BCL Engineering Inc Ormond Beach Florida

USA

Tel:+l 094 672 7316

USA

Bayer Corporation Polymer Division 9 Corporate Park Drive Suite 240 lrvine CA 92714-5113 Bayer Corporation Polymer Division 240 Walton Blvd Auburn Hills MI 48326-1957

+I 416 248 6985

ICELAND Fax: +354 5 65 20 69

Tel: +1 800 622 6004

+I 714 833 2351

CANADA Fax:

Bayer Inc 7600 Trans Canada Highway Pointe Claire Quebec H9R IC8 Tel: + I 514 697 5550

Bayer Corporation 100 Bayer Road Pittsburgh PA 15205-9741

Tel:

Bayer Inc 77 Belfield Road Etobicoke Ontario M9W 1G6 Tel: +1416 248 0771

Bardawil & Co Dora Boulevard Beirut Tel: +96 11 894 566

SINGAPORE

Fax: +65 734 7110

Bayer Corporation Polymer Division (Polyurethanes) 380 Interstate N. Parkway Suite 200 Atlanta GA 30339-2267 USA Fax: + I 404 956 7484 Tel: +I 404 955 4326

BIP Ltd PO Box 3180 Tat Bank Road Oldbury Warley B69 4PG Tel: +44 121 544 2333

USA Fax:

+I 714 752 1306

B & K Resins Ltd Ashgrove Estate Ashgrove Road Bromley Kent BRI 4TH Tel: +44 181 315 1200

USA Fax: + I 810 475 7701

B & K Resins Ltd Unit B3(5) Harvey Court Moss Industrial Estate St Helens Road Leigh Lancashire WN7 3PT Tel: +44 1942 607 299

USA Fax: + I 908 225 2571

USA

UK Fax: +44 181 313 0280

UK Fax: +44 1942 607 266

Blagden Cellobond Ltd Performance Phenolics Sully South Glamorgan CF64 5YU UK Tel: +44 1446 731000 Technical Support: TeL: +44 1446 731 296

Fax: +1 847 692 7408

UK Fax: +44 121 544 7193

Fax: +44 4146 731 385 Fax: +44 1446 731 450

Blagden Manufactured Chemicals Piperell Way Haverhill Suffolk CB9 8PH UK Tel: +44 1440 628 21

Fax: +44 1440 708 166

15

Contact Details -

Bleier & Voss oHG Schleussner Strasse 4 6078 Neu lsenburg Tel: +49 61 02 60 29

GERMANY Fax: +49 61 02 224 45

Byggplast & Batprylar Sverige AB Lovbacksvagen 4 14171 Huddinge Tel: +46 888 0175

Boero Colori France BP 242 Rue Newton F-17012 La Rochelle Cedex 01 FRANCE Tel: +33 546 281 010

Fax: +33 546 281 015

C Chronis SA 54 Tatoiou Str GR-14451 Metamorfosi Attikis Tel: +30 1 28 28 402

Boero Colori France Via Macaggi 19 1-16121 Genova Tel: +39 10 550 0215

ITALY Fax: +39 10 550 0495

-

Tel: +44 81 778 0071

Borden Inc 610 Meidinger Tower Louisville KY 40202 Tel: +I 502 587 7111

USA Fax: +I 502 587 7119

Brenntag Portugal Lda. tatrada de Albarraque-Linhb P-2710 Sintra Tel: +351 1 924 88 00

PORTUGAL

Fax: +351 1 924 88 45

Bryte Technologies Inc 2025 O'Toole Ave San Jose California 95131 Tel: +I 408 434 9809 Email: [email protected]

UK

Fax: +44 1703 738 656

Fax:

+ I 408 434 9811

SPAIN

Tel: +34 3 404 03 00

Fax: +34 3 404 03 01

Ciba Polymere Ciba-Geigy GrnbH Postfach 319 A-1231 Wein Tel: +43 I 801 110

Fax: +43 1 801 11443

Tel: +32 16 44 76 44

Fax:

+32 16 44 76 49

Budget Marine NV Juancho Yrausquin Boulevard 2 PO Box 434 St Philipsburg St Marten NETHERLAND ANTILLES Tel: +599 5 220 68

16

Fax: +599 5 238 04

AUSTRIA

Ciba Polymere Konstruktionsklebstoffe D-79662 Wehr/Baden Postfach 1160/118

GERMANY Fax: +49 7762 3727

Ciba Polymere Ciba-Geigy AG Postfach CH-4002 Bade Tel: +41 61 697 I111

Buchta Polymers Ambachtelyke Zone (De Vunt) 3220 Holsbeek NETHERLANDS

Fax: +33 1 47 52 33 93

Ciba-Geigy SA Apartado 744 E-08080 Barcelona

Tel: +49 7762 820

USA

SWEDEN

Fax: +46 31 452 847

SA Ciba-Geigy 2 - 4 rue Lionel Terray BP 308 F-92506 Rueil-Malmaison cedex FRANCE Tel: +33 1 47 52 30 00

Borden Chemical (UK) Ltd Rownharns Road North Baddesley Southampton SO52 9ZB Tel: +44 1703 732 131

UK

Fax: +44 81 659 5297

GREECE Fax: +30 1 27 91 532

Ciba-Geigy AB Box 605 S-421 26 VBstra FrOlunda Te/: +46 31 892 500

Bondaglass-Voss Ltd 158 164 Ravenscroft Road Beckenharn Kent BR3 4TW

SWEDEN Fax: +46 889 6009

SWITZERLAND Fax: +41 61 696 4354

Ciba Polimeri Ciba-Geigy S.p.A. Casella Pastale 88 1-21047 Saronno (VA) Tel: +39 2 965 41

ITALY Fax: +39 2 967 01157

Ciba Specialty Chemicals Duxford CB2 4QA Tel: +44 223 832 121

UK

Fax: +44 223 493 322

- Cray Val/ey Kunsthane GmbH Ciba Specialty Chemicals 5115 East La Palma Avenue Anahiem CA 92807 Tel: +I 714 779 9000

Ciba Specialty Chemicals 4917 Dawn Avenue East Lansing MI 48823 Tel: + I 517 351 5900 Free phone: I 800 759 7165

USA

Fax: +I 517 351 6255

Tel: + I 216 252 4050

Cook Composites & Polymers 201 Sinclair Frontage Road PO Box 361289 Milpitas CA 95035 USA Tel: +I 408 262 8400

Clariant (Australia) Pty Ltd 103 Vanessa Street Kingsgrove NSW 2208 Tel: +61 2 955 416 44

USA

Fax: +I 714 779 7183

Cook Composites & Polymers 12815 Elmwood Avenue Cleveland OH 44111-5988 USA

AUSTRALIA

Fax: +61 2 9502 4849

Cook Composites & Polymers 217 Freeman Drive PO Box 996 Port Washington WI 53074 USA Fax: +I 414 284 7517

Tel: +I 414 284 5541

CMI Alsaka

USA

Tel: + I 800 283 0809

CMI (Fasco) Idaho

USA

Tel: +I 801 266 5506

Tel: + I 816 391 6000 Freephone: 800 821 3590

Color Mari S L C/ Contramuelle Mollet 4 07012 Palma De Mallorca Tel: +347 171 4398

Cook Composites & Polymers PO Box 419389 919 E 14th Ave Kansas City MO 64141-6389 USA

SPAIN

Fax: +347 172 7566

Corcoran Chemicals Ltd 17/22 Parkgate Street Dublin 8 REPUBLIC OF IRELAND Tel: +353 I 67 78 163

Comaip (Groupe Arnaud) 68 Av. du Gal. Michel Bizot 75012 Paris Tel: +33 1 4473 1000

FRANCE

Fax: +33 I 4346 85 92

Fax: +353 1 67 93 521

Cray Valley Allemagne Bostik Gattenhofeweg 36 6370 OberurselUTs Tel: +49 617140 10

Composite Materials Inc 14530 South Anson Avenue Santa Fe Springs CA 90670-5302

USA

Tel: +I 310 921 9926 Fax: + I 310 802 9045 E-mail [email protected] Web:http://www.CMI-Composites.com

Composite Materials Inc 698 Bryant Boulevard Rock Hill SC 29732 Tel: + I 803 327 8072

USA

Fax: +1 803 327 8089

Composite Materials Inc Sales Offices: Tel: +I310 921 9926 Arizona: N. California: Tel: +1916 371 2000 Washington: Tel: +I 206 699 7113 Alaska: Tel: 800 283 0809 Idaho: Tel: 800 658 5899 Oregon: Tel: 800 255 6006 Utah: Tel: 801 266 5506

Fax:+I 816 391 6215

GERMANY

Fax: +49 6171 41 99

Cray Valley Benelux Bostik Laagraven 45 3439 LK Nieuwegein Tel: +31 30 896 396

NETHERLANDS Fax: +31 30 896 846

Cray Valley lberica Apartado 13 08100 Mollet Del Valles (Barcelona) Tel: +34 3 570 09 19

SPAIN Fax: +34 3 570 08 40

Cray Valley Kunstharze GmbH Muhlenstrasse 153 167 4154 Tonisvorst 1 GERMANY

-

Tel: +49 21 51179 48 21

Fax: +49 21 51ng 46 32

Cray Valley Kunsthane GmbH FIurstrasse 502 Zwickau GERMANY Tel: +49 3 75/828(0)

Fax: +49 3 73231 29

17

Contact Details

-

Cray Valley Laporte Road Stallingborough DN37 8DR Tel: +44 469 572 464

UK Fax: +44 469 572 988

Cytec Fiberite Ltd Wrexham Industrial Estate Abenbury Way Wrexham LL13 9UZ Tel: +44 1978 665 200

Cray Valley S A Route d'Arras BP 19 62320 Drocourt Tel: +33 21 74 84 59

FRANCE Fax: +33 21 49 64 84

Cray Valley S A Forum Part Dieu 27 rue Maurice Flandin 69444 Lyon cedex03 Tel: +33 72 33 21 32

FRANCE Fax: +33 72 33 63 21

Cray Valley S A 65 rue du G6nkral Buat 44000 Nantes Tel: +33 40 29 26 27

FRANCE Fax: +33 40 29 30 49

Cray Valley S A lmmeuble le Diamant 16 Rue de la Republique Puteaux Cedex I 0 1-92970 Paris la Defanse FRANCE

-

Tel: +33 1 41 35 68 68

Fax: +33 1 41 35 61 18

Cray Valley South Africa S A PO Box 32211 Mobeni 4060 Natal SOUTH AFRICA Tel: +27 31 92 33 77

Fax: +27 31 90 29 538

Crown Fibreglass Works San Gwakkin Road Mriehel Tel: +356 49 91 29

Fax: +356 37 57 28

GERMANY Fax: +49 5223 5858

Cytec Aerospace Ltd Representation Francaise 76 Rue De Pontl 78100 St Germain En Laye Tel: +33 1 30 619 001

FRANCE I 30 619 007

Fax: +33

Cytec Engineered Materials Inc 1440 N Kraemer Blvd. Anaheim California 92806 USA

18

Decatlo LDA Apartado 1103 2775 Parede

PORTUGAL

Tel: +35 11 453 2769

Fax: +I 714 630 9410

Fax: +35 I1 453 2780

De-Comp Composites Inc 407 S "D" Street Cleveland OH 74020 Tel: + I 918 358 5881

Fax:

Delos Co Ltd 8 Leoforos Scaramanga Keratsini 18757 Pireaeus Tel: +30 1 431 1271

USA +I 918 358 3750

GREECE I 431 8364

Fax: +30

-

DlAB Polimex France Centre D'Activites Saint Roch 61 Rue Coquilett 45200 Montargis FRANCE Fax: *33 2389 38029

Divinycell International AIS Nye Vakas Vei 78 N-1360 Nesbru

Divinycell Products PO Box 05214 Rio De Janerio Tel: +55 21 267 8877

NORWAY

Fax: +47 668 464 14

Divinycell International Ltd Box 201 Repslagaregatan S-312 22 Laholm Tel: +46 430 163 00

Cytec Engineered Materials Inc 1300 Revolution Street Havre De Grace Maryland 21078 USA Tel: +I 410 939 1910 Fax: +I 410 039 8103

Tel: +I 714 630 9400

USA

Tel: +47 669 819 30

Cytec Aerospace Friedrich Strasse 30 D4908 Bunde Tel: +49 5223 160 716

Cytec Industries Inc Corporate Headquarters Five garret Mountain Plaza West Paterson NJ 07424

Tel: +33 2389 38020

MALTA

UK

Fax: +44 1978 665 223

SWEDEN

Fax: +46 430 163 95

BRAZIL Fax: +55 21 287 7750

Dow Chemical (Australia) Ltd Kororom Creek Road Altona Victoria AUSTRALIA Tel: +61 3 9368 4411

- Dulux Australia Dow Chemical Canada Inc P.O. Box 1012 1086 Modeland Road Sarnia Ontario N7T 7K7

DSM ltalia Via Silvio Pellico 12 Casella Postale 321 1-22100 Como

CANADA

Tel: Freephone 1 800 441 4DOW (4369)

Dow Chemical Company 2040 Dow Center Midland MI 48674

USA

Fax: +I 517 638 9752 Tel: +I 517 636 0782 Freephone I 800 441 4DOW (4369)

Tel: +39 31 236 111 For Export Tel: +39 31 236 111

Fax: +31 20 691 6418

Dow Europe S A Bachtobelstrasse 3 CH-8810 Horgen Tel: +41 1 728 2145

SWITZERLAND Fax: +41 I 728 2950

Dow Quimica Mexicana SA de C.V. Av. Paseo de las Palmas 555-3 Loamas de Chapultepec MEXICO Mexico 11000 D.F. Tel: Freephone 95 800 441 4369

DSM oBASF Structural Resins Ceintuurbaan 5 P.O. Box 615 8000 AP Zwolle NETHERLANDS Tel: +31 38 4569 569

Fax: +31 38 4569 500

DSM .BASF Structural Resins Deutschland GmbH Bau D-205 67056 Ludwigshafen GERMANY Tel: +49 621 604 1665

Fax: +49 621 602 0733

DSM Espaiia Sa Edificio EURO-3 c./ Frederic Mompou 5 planta 7 Pta 3-4 08960 Sant Just Desvern(Barce1ona) SPAIN Tel: +34 3 473 1100

Fax: +34 3 473 6350

DSM France Tour Atlantique 9 Place de la Pyramide La Defense 9 92911 Paris La Defense C6dex Tel: +33 1 4125 0505

Fax: +33 1 4125 0642

Fax: +31 38 4569 500

Marketing & Communications Dept Tel: +31 38 4569569

Fax: +31 38 4569500

DSM Resins International bv Slachthuisweg 30 P.O. Box 70 NETHERLANDS AB Hoek van Holland Tel: +31 174 315 550

DSM Scandinavia AB Va wsvilgen P.O. Box 619 26126 Landskrona Tel: +46 418 566 70

DSM Resins UK Ltd 5 Civic Way PO Box 8 Ellesmere Port South Wirral L65 OHB Tel: +44 151 355 6170

Dulux Australia 15 Gow Street Padstow NSW 2211 Tel: +61 2 9794 9820

MaiIing Address: Locked Bag 707 Milperra NSW 1891 Dulux Australia McNoaughton Road Clayton Victoria Tel: +613 9263 5063

FRANCE

Fax: +39 31 249 132

DSM Resins bv Business Unit Industrial Resins & Compounds Ceintuurbaan 5 P.O. Box 615 8000 AP Zwolle NETHERLANDS Tel: +31 38 4569 569

Dow Information Centre PO Box 12121 1100 AC Amsterdam Zuidoost NETHERLANDS

ITALY Fax: +39 31 236 790

Mailing Address: PO Box 60 Clayton South Victoria 3169

Fax: +31 174 315 517

SWEDEN Fax: +46 418 224 66

UK Fax: +44 151 357 1282

AUSTRALIA Fax: +61 2 9794 9426

AUSTRALIA

AUSTRALIA Fax: +61 3 9253 5007

AUSTRALIA

19

Contact Details Dulux -Australia 1477 lpswich Road Rocklea Queensland 4106 Tel: +61 7 3867 8511

Evata Plastics Enterprises POBox 30 Paralimni

AUSTRALIA

AUSTRALIA

Duroform J. Fritz GmbH & Co KG Kieselstrasse 6 D-56357 Miehlen TS GERMANY

NETHERLANDS Fax: +31 1825 16517

Fax: +33 1392 412 662

Epoxy Resins Tech. Ltd 41 Timber Wharf Marsa HMR 12 Tel: +356 220 145

SWEDEN Fax: +46 885 6009

Etablissements Charles 111 Rue De Stalingrad 93100 Montreuil FRANCE Tel: +33 I 4287 5212 Fax: +33 1 4857 4147

Exaton Composites (PTY) Ltd PO Box 38703 Pinelands 7430 SOUTH AFRICA Tel: +27 21 510 2564

Fax: +27 21 510 5497

Fehiling Downing

SPAIN

Ferro Corporation Speciality Plastics 1000 Lakeside Avenue Cleveland Ohio 44114 Tel: +I 216641 8580

Euroresins SA Poligono Cova Solera Avenida Can Sucarratts 114 esq. Londres 08191 Rubi (B)

Ferro Corporation Liquid Coatings & Dispersions Div. 3391 Route 157 N.D. Du Mont-Carmel Quebec GOX 3JO CANADA Tel: +I 819 378 6169 Fax: +I 819 378 7291 Ferro-Danmark AIS lndustrvej 10 3540 Lynge Vassungerrad

SPAIN

Fax: +34 3 588 7557

Tel: +39 35 49 96411

Euroresins Benelux BV Straevenweg 1 PO Box 428 6000 AK Weed Tel: +31 495 536 870

ITALY Fax: +39 35 49 96450

NETHERLANDS

Ferro France S.A. 43 Rue Jeanne d’Arc 52115 St Dizier Cedex Tel: +33 25 073 333

20

f a x : +34 64 534 051

Ferro Eurostar, S.A. Zone lndustrielle Rue de la Ferme St. Lardre Bo’ite Postale 2 Tel: +33 1 344 747 00

Fax: +31 495 542 725

DENMARK Fax: +45 42 187 634

Ferro Enamel Espaiiola, S.A. Plastics Division P.O. Box 232 1280 Castellon Ctra. Valencia-Barcelona, km. 61’5 12550 Almarzora/Castellon SPAIN Tel: +34 64 533 900

Euroresins ltalia srl via Provincuale 6 24040 Filago (Bergamo)

USA Fax: +I 216 696 5323

Ferro Corporation Liquid Coatings & Dispersions Div. 1301 North Flora Street Plymouth IN 46563 U.S.A. Tel: +I 219 935 5131 Fax: +I 219 935 5278

Tel: +45 42 188 222

Tel: +34 3 588 6801

602 968 6677 213 870 9561 510 784 0414

MALTA

Fax: +356 220 145

Erlandsons Brygga AB Karlsrogatan 1 S-I 70 65 Sulna Tel: +46 885 8900

USA

Tel: +34 3 894 4629

Enterprise Agency International Ltd 4 Hardings Cottages Francis Close St. Thomas Exeter UK Devon EX4 1HD Tel: +44 1392 422 843

E V Roberts&Associates Tel: +I Arizona City, AZ Tel: + I Culver City, CA Tel: + I Hayward, CA

Fax: +49 6772 6888

ECM bv Middelblok 198 2831 BR Gouderak Tel: +31 182523850

CYPRUS

Fax: +357 38 20 756

Fax: +61 3867 8592

MaiIing Address: PO Box 100 Archerfield Queensland 4108

Tel: +49 6772 3210

Tel: +357 38 21 315

FRANCE

f a x : +33 1 346 858 40

FRANCE f a x : +33 25 564 302

- F.LLI Mugnaini Srl Ferro (Great Britain) Ltd. Plastics Divison Westgate Aldridge West Midlands WS9 8YH Tel: +44 1922 583 00

Fiberite Europe GmbH (Central Europe) Erkelenzer StraI3e 36 41 179 Moenchengladbach UK

Tel: +49 2161 589 29

GERMANY

Fax: +49 2161 570 657

Fax: +44 1922 529 86

Fiberite Europe GmbH Via Statale No 348 56100 Ripa Fratta (Pisa)

Ferro (Holland) B.V. lndustrieweg 135 P.O. Box 6088 3002 AB Rotterdam

ITALY

Telfiax: +39 50 854 460

NETHERLANDS

Ferro Industrial Products Ltd 8390-124th Street Surrey British Columbia V3W 3x9 CANADA

Fiberite Europe GmbH Barclay Venture Centre Units 19/20 University of Warwick Science Park Sir William Lyons Road Coventry CV4 7EZ UK

Tel: + I 604 599 4928

Tel: +44 1203 692 211

Tel: +31 10 478 4911

Fax: +31 10 478 4499

Fax: +I 604 594 0813

Ferro Plastics (Germany) GmbH Osnigstrasse 12 D-33605 Bielefeld GERMANY Tel: +49 521 250 84

Fax: +49 521 250 86

Fib-Chem Penslyvania

USA

Tel: +I412 684 9700

Connecticut, Delaware, Maine, Maryland, New Hampshire, New York, Virginia, West Virginia Tel: 800 736 0999

Fibercote Industries Inc 172 east Aurora Street Waterbury CT 06708 Tel: Freephone 800 755 1344 Fax:

Fiberglass Hawaii Inc 1377 Colburn Street Honolulu HI 96817 Tel: +I 808 847 3951

USA +I 203 574 5411

USA

Fiber Glass International N.Z. Division of A.C. Harick (N.Z.) Ltd 6 Winston Place Henderson Aukland NEW ZEALAND Tel: +64 9 838 7195 E-mail: fgi.co.nz

-

Fax: +64 9 837 1035

Tel: +64 3 366 0409

Fiberite Europe GmbH (France & Spain) 4 rue J.F. Kennedy 31000 Toulouse Tel: +33 61 122 912

Fiberite Inc 2055 E. Technology Circle Tempe AZ 85284 USA Tel: + I 602 730 2234 Fax: +I 602 730 2090 Fiberite Inc (Marketing) 1557 Birch Ave Escondido CA 92027 Tel: + I 619 489 8589

Fax: +64 377 2523

Fax:

USA +I 619 489 1619

Fiberite Inc (Export Sales - not Europe) 23271 Verdugo Suite A-I Laguna Hills CA 92653 USA Tel: + I 714 855 5689 Fax: +I 714 472 4353 Fiber Kemi AIS Nedre Slottsgatan 4 0157 Oslo 1 Tel: +47 22 411 897

Firgos RPM BV P.O. Box 356 Pampuslaan 143 1382 JN Weesp Tel: +31 294 480 413

Fiber Glass International N.Z. Division of A.C. Hatrick (N.Z.) Ltd 31 Sydenham Street Sydenham Christchurch NEW ZEALAND

Fax: 44 1203 692 213

F.LLI Mugnaini Srl Via Montramito 55054 Massarosa Lucca Tel: +39 584 962 344

NORWAY Fax: +47 22 332 736

NETHERLANDS Fax: +31 294 432 374

ITALY Fax: +39 584 940 578

FRANCE Fax: +33 61 139 566

21

Contact Details C. Fontanals SA C/ Progreso 75 Poligono Industrial Almeda 08904 Cornella De Llobregat (Barcelona) Tel: +34 3 474 4869

Freeman Distribution Ltd POBox 8 5 Civic Way Ellesmere Port L65 OH6 Tel: +44 51 356 3111

SPAIN

Fax: +34 3 474 3027

UK

Fax: +44 51 355 3772

FRP Services & Company 1-15-9 Awaza Nishi-Ku Osaka 550 JAPAN (From Europe, North & South America, S.E.Asia, S.W. Asia & China) Tel: +81 6 535 1934

Fax: +81 6 535 1675

(From Korea,Taiwan,Australia, New Zealand,Middle East,Africa) Tel: +81 6 535 1935 Fax: +81 6 535 1676 E-mail: [email protected] Web: http://www.frpservices.com

FRP Services Europe Sarl Espace Forbin 5 AlMe Ciaude Forbin 13100 Aix-en-Provence

FRANCE

Tel: +33 42 96 92 57 Fax: +33 42 96 93 32 E-mail: [email protected]

FRP Services & Co (America) Ltd 10 Bank Street Suite 450 White Plains New York 10606 USA Tel: +1 914 686 4090 Fax: + I 914 686 3988 E-mail: [email protected]

FRP Services & Company Singapore Representative Office 396 Alexandra Road #06-01 BP Tower Singapore 119954 SINGAPORE Tel: +65 270 5001 E-mail: [email protected]

Fax: +65 275 5746

FRP Supply Inc USA (For Reichhold) Alabama, Arkansas, Connecticut, Delaware, Florida, Georgia, Illinois, Kansas, Kentucky, Louisiana, Maine,Maryland, Massachusetts, Minnesota, Mississippi,Missouri, Nebraska, New Jersey, New Hampshire, New York, North Carolina, North Dakota, Ohio, Oklahoma, Pensylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Vermont, Virginia, West Virginia, Wisconsin Freephone: 888 377 2745

22

FRP Supply Inc USA (For Reichhold) Continued: Arkansas, California, Colorado, Hawaii, Idaho, Montana, Nevada, New Mexico, Oregan, Utah, Washington, Wyoming Freephone: 800 555 5899

FRP Supply Inc CANADA (For Reichhold) British Columbia Tel: 604 596 7138 Saskatchewan, Manitoba Freephone: 800 665 0053

FRP Supply Inc British Columbia

CANADA

Tel: + I 604 596 7138

Alberta, Saskatchewan 81Manitoba Tel: 800 665 0053

FRP Supply Inc 1270 Rue Nobel (Montreal) Boucherville Quebec J4B 5H1

CANADA

Tel: +1 514 449 6090

FRP Supply Inc 1500A Nobel St. Bldg. BC3 Boucherville Quebec J4B 5H3

CANADA

FRP Supply Inc 11307 166A Street Edmonton Alberta T5M 3W4

CANADA

-

FRP Supply Inc 310 Humberline Drive Unit #2 Etobicoke Ontario M9W 5S2 Tel: +I 416 674 0624 FRP Supply Inc 1591 Dugald Road Winnipeg Manitoba R2J OH3

CANADA

CANADA

Tel: +204 661 6986

FRP Supply Inc Atalcomulco No. 1 Naulcalpan Edo

MEXICO

Tel: +52 5 359 3000

FRP Supply Inc Calle Robinosa S/N Entre Guana Just0 y Emilio Carrana Col. MEXICO NaucaIpan

- FRP Supply Inc FRP Supply Inc 3300 Ball Street Birmingham 3 AL 35234

USA

FRP Supply Inc 4550 N.E. Expressway Atlanta GA 30340

USA

FRP Supply Inc 728 S.E. Creekview Drive Ankenny IA 50021

USA

Tel: +I205 841 6451

FRP Supply Inc 701 Western Drive Mobile AL 36607 Tel: + I 800 950 4377

USA Fax: +I 205 479 4950

FRP Supply Inc 5420 Speaker Road Kansas City KS 66106 Tel: + I 800 779 3777

Fax:

FRP Supply Inc 6839 W Chicago Street (Chandler) Pheonix USA A2 85226

FRP Supply Inc 11109 Choctaw Drive Baton Rouge LA 70815 Tel: + I 800 950 4377

Fax: +I 504 275 7178

FRP Supply Inc 2461 Crocker Circle FairField CA 94533

FRP Supply Inc 1315 Airport Drive Shreveport LA 71107

FRP Supply Inc 6180 Scott Hamilton Drive Little Rock AR 72209

FRP Supply Inc 1851 E. First Street Santa Ana CA 92705 Tel: +I 800 428 0377 FRP Supply Inc 10505 S. Painter Ave. Santa Fe Springs CA 90670 FRP Supply Inc 156 W. 56th Ave. Denver CO 80216 FRP Supply Inc 200 N E 181st Street Miami FL 33162 Tel: +I 800 343 0736 FRP Supply Inc 1929 Director's Row Orlando FL 32809 Tel: + I 800 343 0736 FRP Supply Inc 5125 W. Hanna Tampa FL 33634

USA +I 913 621 1146

USA

USA

USA

USA

Tel: +7 318 221 0631

USA

FRP Supply Inc 55 Scotland Boulevard Bridgewater MA 02324 Tel: +I 508 697 1600

Fax:

USA + I 508 697 7808

FRP Supply Inc 400 Main Street (Tewksbury)

USA

USA

USA Fax: +1 305 654 8366

USA Fax: +I 407 857 0425

USA

Boston MA 01876

USA

FRP Supply Inc 12995 Toepfer Road (Warren) Detroit USA MI 48089 FRP Supply Inc 2011 Turner Street Lansing MI 48906 Tel: + I 216 439 4920

Fax:

USA + I 216 439 8817

FRP Supply Inc 4401 Valley Industrial (Shakopee) Minneapolis MN 55379 USA FRP Supply Inc 7710 Polk Street St Louis MO 63111 Tel: + I 800 779 3777

USA Fax: + I 314 638 9320

23

Contact Details FRP Supply Inc State Route 2 Hastings NB 68901 FRP Supply Inc 3930 Glenwood Drive Charlotte NC 28208 Tel: +I 800 289 4377

aoo

342 4377

FRP Supply Inc 120 North Street Teterboro NJ 07608 Tel: + I 800 631 3221

Fax:

USA

USA

Fax:

Fax:

FRP Supply Inc 2307 Business Center Drive Austin TX 78744 USA Fax: + I 512 448 4748 Tel: + I 800 950 4377

USA

USA +I 614 889 3426

USA +I 918 587 4129

Tel: + I 713 943 1168

USA Fax: + I 713 943 7493

FRP Supply Inc 10919 County Road 127 W. Midland TX 79711

USA

FRP Supply Inc Freeport Center Bldg. 12 (Clearfield) Salt Lake City UT 84016

USA

FRP Supply Inc 2410 Patterson Ave S W Roanoke VA 24016

FRP Supply Inc 3322 N W 35th Avenue Portland OR 97210

USA Fax:

+ I 503 223 8234

USA

FRP Supply Inc 150 W, Fourth Ave. (Freedom) Pittsburgh PA 15042 USA 24

USA

FRP Supply Inc 8901 Galveston Road Houston TX 77034

FRP Supply Inc 3535 West 21st Street Tulsa OK 74107

FRP Supply Inc 201 Colwell Lane Conhocken PA 19428

FRP Supply Inc 2315 Clifton Ave. Nashville TN 37209

USA

FRP Supply Inc PO Box 2219 Columbus OH 43216

Tel: + I 800 428 0377

USA Fax: + I 704 393 2927

FRP Supply Inc 3191 Wood Drive Dallas TX 75041

FRP Supply Inc 2788 Glendale Milford Cincinnati OH 45241

Tel: +I 800 242 7010

USA +I 919 834 4878

Tel: +I 800 289 4377

USA

Fax: +I 201 288 0526

FRP Supply Inc 200 Darrow Road Akron OH 44305

Tel: +I 614 889 3444

USA

FRP Supply Inc 5263 National Drive Knoxville TN 37914

Fax: +I 704 3932927

FRP Supply Inc 1415 S Bloodworth St Raleigh NC 27611 Tel: +I

USA

FRP Supply Inc 729 Mauney Drive Columbia SC 29201

Tel: +1 800 342 4377

USA Fax:

+I

Fax:

USA + I 206 236 9948

FRP Supply Inc 204 Madison Menasha WI 98040 Tel: +I 800 428 0377

919 834 4878

Futura Coatings Europe N.V. Route de Flandre 100 8-7780 Komen BELGIUM Tel: +32 56 55 44 22

Fax: +32 56 55 45 00

- Hawk lnternationalDistributors Ltd Futura Coatings Inc 9200 Latty Avenue St Louis MO 63042 Tel: + I 314 521 4100 E-mail: [email protected]

USA Fax: + I 314 521 7255 Web: www.inlink.com/-futura

Gamma Tensor SL Poligono Ind Cotes Baixes Calle B Parcela 4 03804 Alcoy Tel: +34 655 23913

H. Gattiner GmbH Landstrasse 109 A-4020 Linz Tel: +43 732 66 02 94

AUSTRIA Fax: +43 722 97 42 09

Gel-Top AIS Storhaven 7100 Vejle Tel: +45 75 82 11 33

SPAIN

Fax: +34 655 23056

DENMARK Fax: +45 75 82 I 9 67

GLS Fiberglass Inc Sales Offices: Free phone nos. 800 457 4357 Lakeland, FL Medley, FL 800 432 2752 Suwanee, GA 800 423 7874 Valdosta, GA 800 458 5916 High Point, NC 800 633 9721 Dayton, OH 800 334 7498 Des Moines, IA 800 457 7949 Fridley, MN 800 457 7011 Kansas, City 800 457 7975 Tulsa, OK 800 457 7017 Michigan 800 348 7503 Gougeon Brothers Inc Bay City MI 48702 Tel: + I 517 684 7286 Email: [email protected]

USA Fax: +I 517 684 1287

Graco Supply Fort Worth TX

USA

Tel: + I 817 429 0466

General Fiberglass USA Freephone: 800 558 6208 Illinois, Wisconsin: lowa,Kansas,Minesota, Missouri,Montana,Nebraska, 800 356 8281 N. & S. Dakota Indiana,Kentucky,Michigan & Ohio 800 654 6971

George C. Brandt USA Colarado, Minesota, New Mexico, & Wyoming Freephone:

800 456 6399

GTI Process 79 RN 10 78310 Coignieres

-

Tel: +33 1 34 61 96 33

Gulf Coast Resins Div. of Advanced Plastics Inc USA Alabamha & Mississippi Free phone 800 327 6136

Gwil Industries 6888 Burlington Avenue Burnaby British Columbia V5J 4H1 Tel: + I 604 438 1341 Fax:

Georgia-Pacific Resins Inc 2883 Miller Road Decateur GA 30035 USA

Hastings Plastics Santa Monica CA

Tel: + I 770 593 6828

Tel: + I 310 829 3449

Fax: +1 770 322 9973

Glaspol Composites SL C/ Padre Ferris 28 46009 Valencia Tel: +34 634 94733

GLS Fiberglass Inc 64323 US 33 East Goshen IN 46526 Tel: + I 219 533 0591

GLS Fiberglass Inc 1066 Dieckman Road Woodstock IL 60098 Tel: + I 815 338 8660 Free phone: 800 435 6138

SPAIN

Fax: +34 634 97897

Hawkeye Industries Inc (Japan & N. America) 3050 Brookview Drive Marietta GA 30068 Tel: +1 404 977 3336

USA Freephone: 800 432 2752

FRANCE

Fax: +33 I 34 61 89 40

CANADA + I 604 438 7347

USA

USA Fax: + I 404 565 5094

Hawk lnternational Distributors Ltd (Europe & Middle East) Waterside Brightlingsea Essex C07 OAS UK Tel: +44 1206 30 40 10

Fax: +44 1206 30 42 26

USA Fax: + I 815 338 2114

25

Contact Details -

Hepworth Minerals & Chemicals Ltd Brookside Hall Congleton Road Sandbach CW11 OTR UK Tel: +44 1270 752 752 Fax: +44 1270 752 753 Email: [email protected]

HF Dorna No. 20 6th Sarvestan Street Zarab-Khaneh Pasdaran Avenue Tehran 16619 Tel: +98 218 084 827

Tel: +45 622 42121

Tel: +I 704 328 1721

IRAN

DENMARK

Fax:

Fax: +675 472 2559

IC1 Paints (Fiji) Ltd PO Box 3037 Nukuwata Street Lami ICOM Composites

USA USA +I 704 328 4572

Fax: +61 3 649 520 1021

lndukern S.A. Teodora Lamadrid 7-11 E-08022 Barcelona Tel: +34 3 41 86 445

Fax: +61 9451 2636

Huntsman Chemical Co Australia Ltd 105 Great Western Highway (Corner Doonside Road) Arndell Park NSW 2148 AUSTRALIA Huntsman Chemical Co Australia Ltd PO Box 6882 Blacktown Business Ctr. Blacktown NSW 2148 AUSTRALIA Fax: +61 2 9672 7708

Huntsman Chemical Co Australia Ltd 5107 Dewar Terrace Sherwood Queensland 4975 AUSTRALIA Tel: +61 7 3394 8306

Fax: +61 7 3394 4080

Fax: +385 52 74 13 92

lnterplastic Corporation 1225 Wolters Boulevard St. Paul MN 55110-5145 USA Tel: +I 612 481 6860 Fax: + I 612 481 9836 Customer Service East: 3535 Latonia Avenue Ft. Wright Kentucky 41015

USA Fax: +I606 292 7472

Tel: 800 745 6270

Customer Service West: 12335 South Van Ness Avenue Hawthorne CA 90251 USA Fax: +I606 292 7472

Tel: 800 367 3746

ITW Plexus Europe Unit 1 Bushacre Court

Garrard Way Kettering Northants "18

6TD

Tel: +44 1536 516 611 Emai: [email protected]

26

SPAIN Fax: +343 41 73 654

lntercommerce Export-lmport d.o.0. UI. Ernest Milosa 20 52470 Umago CROATIA Tel: +385 52 74 11 I 1

Tel: +61 2 9672 7144

DENMARK

Tel: +45 7570 6222

Freephone: 800 658 5244

Huntsman Chemical Co Australia Ltd 57 Division Street Welshpool WA 6106 AUSTRALIA Tel: +61 8 9458 7188

FIJI Fax: +679 361 094

Idaho Chemical Industries

Huntsman Chemical Co Australia Ltd Somerville Road PO Box 62 West Footscray Victoria 3012 AUSTRALIA Tel: +611 3 649 520 0135

Fax: +61 8373 0337

IC1 Dulux Papua New Guinea Pty Ltd (LAE) PO Box 1105 Aircorps Road Morobe Province LAE PAPUA NEW GUINEA

Tel: 679 361 622

Fax: +45 622 42575

HK Research Corporation PO Box 1809 Hickory NC 28603

Tel: +61 8 8373 1488

Tel: +675 472 3633

Fax: +9a 212 31831

H F Marine Nordgade 21 Ollerup DK-5762 Vester Skerninge

Huntsman Chemical Co Australia Ltd 36 Davis Street Wingfield SA 5013 AUSTRALIA

UK Fax: +44 1536 511 160

- Keyser & Mackay Jotun Polymer A S Postboks 2061 N-3235 Sandefjord

ITW Plexus 30 Endicot Stree Danvers MA 01923

USA

Fax: +I 508 777 7984 Tel: +I 800 851 6692 Website: http://www.itwplexus.com

ITW Plexus 21425 Civic Center Drive Suite 116 Southfield MI 48076 Tel: + I 810 352 6726

USA Fax: +I 810 352 7192

Javier Pujol Madrazo 83 1-2a 08006 Barcelona

Netherlands

Fax: +86 510 665 1333

Jiangyin Crabec Synthetic Chemicals Co Ltd Unit A-C HONG KONG 4/F Kowloon Panda Hotel Jotun B V Postbus 38 NL-3250 AA Stellendam Tel: +31 187 49 33 33

Fax: +852 241 720 46

NETHERLANDS

Jotun Danmark AIS Postboks 360 DK-6000 Kolding Tel: +45 75 53 11 11

Fax: +90 212 279 25 49

Tel: +44 181 64 84 684

UK Fax: +44 181 64 06 432

Oy Jotun Scanpol AB Melkokatan 28E Fin-00210 Helsinki Tel: +358 9 69 22 416

FINLAND Fax: +358 9 67 48 70

Jotun Spolchemie a s Jospol Veleslavinova 3 P.O. Box 10 CZ-400 11Usti nad Labem Tel: +42 47 49 755

CZECH REPUBLIC

Fax: +42 47 40 067

Jotun Sverige AB Box 151 S-421 22 Vastra Fr6lunda Tel: +46 31 69 63 00

SWEDEN

Fax: +46 31 69 19 62

AIS Kemitura Knud Bro Allee 7H 3660 Stenlose

DENMARK Fax: +45 42 17 25 1 1

DENMARK Fax: +45 75 53 99 05

Kevra Oy Kalerankatu 52 PO Box 235 00181 Helsinki Tel: +358 9 60 70 83

FtNLAND Fax: +358 9 60 8072

Fax: +49 40 85 73 69

Jotun ltoc S.r.1. Via Romagnoli 23 1-43056 S Polo Di Torrile-Parma ITALY Tel: +39 521 812 811

Jotun Polymer (UK) Ltd 54 Willow Lane Mitcham Surrey CR4 4NA

Tel: +45 42 17 18 55

Jotun (Deutschland) GmbH Winsbergring 25 D-22525 Hamburg GERMANY Tel: +49 40 85 19 630

UAE Fax: +971 48 35 887

Fax: +31 187 49 32 66

Jotun Boya San.ve Ticaret A S . Cileki Cad. No. 18 3 Levent 80620 Istanbul TURKEY Tel: +90 212 279 78 78

Jotun Polymer Inc P.O. Box 16911 Jebel Ali Free Zone Dubai

SPAIN

Jiangyin Crabec Synthetic Chemicals Co Ltd 133 Yingbin Zi Road Huangtu Jiangyin Jiangsu 21445 P.R. CHINA

Tel: +852 241 713 86

HUNGARY

Fax:+36 88 40 65 509

Tel: +971 48 35 215

TeuFax: +343 201 3742

Tel: +86 510 665 1029

FRANCE

Fax: +33 1 64 I 1 01 11

Jotun Polymer Hungary Kft J6zsef A.u. 34 8200 Veszpr6m Tel: +36 88 40 65 09

Fax: +31 20665 2548

NORWAY Fax: +47 34 46 46 14

Jotun Polymer France S A Centre Evolic 105 Rue des Campanules F-77185 Lognes Tel: +33 I 64 11 01 14

Jan Dekker Epoxysytemen Diemerzeedijk 3 1095 KK Amsterdam Tel: +31 20665 2452

Tel: +47 33 45 70 00

Keyser & Mackay 94 - 102 rue de Buzenval 75020 Paris Tel: +33 1 40 09 11 66

FRANCE

Fax: +33 1 40 09 91 66

Fax: +39 521 813 445

27

Contact Details Keyser & Mackay Leidsegracht 19 1017 NA Amsterdam Tel: +31 20 626 33 23

NETHERLANDS Fax: +31 20 625 45 59

Keyser & Mackay Ringstrasse 46 50996 Koln

GERMANY

Kidron Plastics Ltd 155 Bialik Street P.O. Box 8045 Ramat Gan 52180

ISRAEL

Tel: +972 37 51 41 71

Fax: +972 37 52 04 45

SWITZERLAND

MALAYSIA

Fax: +60 3 432 0371

Fax: +90 212446 351

Lars Hallkvist APS Hejreskovvej 18 B DK-3490 Kvistgaard

DENMARK Fax: +45 4913 8480

TURKEY

Fax: +90 252 413 6164

Lilly Industries, Inc 210 East Alondra Boulevard Gardena CA 90248

Tel: +I 219 522 1062

USA

NETHERLANDS Fax: +31 76 542 4070

LONZA Biologics Inc 101 International Drive Portsmouth NH 03801 Tel: + I 603 334 6100

Fax: +1 603 334 6262

USA

LONZA Biologics plc 228 Bath Road Slough Berkshire SL1 4DY

UK Fax: +44 1753 777 001

LONZA Biotec sro Okruzni 134 CZ-281 61 Kourim

CZECH REPUBLIC

Tel: +42 321 836 01

Fax: +42 321 836 10

LONZA France Sarl 55 rue Aristide-Briand F-92309 Levallois-Perret Cedex

Tel: +49 202 245 380

FRANCE

Fax: +33 1 408 999 01

LONZA GmbH Morianstrasse 32 P.O. Box 13 14 53 D-42041 Wuppertal

GERMANY Fax: +49 202 245 3820

USA LONZA Hongkong Ltd 11 F. Dah Sing Life Building 99 Des Voeux Road Central Tel: +852 2545 68 68

28

Fax: +65 562 86 88

Tel: +31 76 542 5100

Tel: +33 1 408 999 00

Tel: +1 213 321 0710

Lilly Industries, Inc Elkhart Indiana

Tel: +65 562 86 98

Tel: +44 1753 777 000

Liber Turizm TIC Ltd STI Haci Mustafa SK 116 48700 Marmis Tel: +90 252 413 6183

LONZA Representation Office 25 International Business park 02-09 German Centre Singapore 2260 SINGAPORE LONZA Benelux BV Aluminiumstraat 1 P.O. Box 3148 NL-4800 DC Breda

Kompozit Marin Turizm Sanayi VE Ticaret Ltd Sti Kemeralti Cad No. 67 80020 Karakoy Istanbul TURKEY

Tel: +45 4913 8444

UK Fax: +44 121 440 0281

Fax: +41 43 21 70 22

KL Representative Office No 7 3rd Floor Jalan Kenari 4 Bandar Puchong Jaya 47100 Puchong Selangor

Tel: +90 212 251 6200

Llewellyn Ryland Ltd Haden Street Birmingham 812 9DB Tel: +44 121 440 2284

Klinger Kunstoffe HinterdorfstraBe 28 6430 Schwyx

Tel: +60 3 432 0370

USA

Tel: +l 305 475 0150

Tel: +49 221 392 044-45

Tel: +41 43 21 41 44

Lilly Industries, Inc Erickson Division 2355 S W 66th Terrace Davie FL 33314

HONG KONG

Fax: +852 2854 18 81

- A H Meyer & Cie AG LONZA lberica SA Milanesado 25-27 4.0 1.a E-08017 Barcelona Tel: +34 3 280 50 22

Tel: +44 1992 440 880

LONZA Inc 17-17 Route 208 Fair Lawn NJ 07410 Tel: + I 201 794 2400

SPAIN

Fax: +34 3 205 67 55

Maprac (UK) Ltd Conduit Buildings Conduit Lane Hoddesdon Hertfordshire EN11 8EP

USA Fax: +1 201 794 2594

Maroof Trading Company L.L.C. P.O. Box 60071 Dubai UAE Tel: +971 4 858 987

LONZA Japan Ltd Kyowa Shinkawa Bldg 8th Floor 20-8 Shinkawa 2-chome Chuo-ku JAPAN Tokyo 104 Tel: +81 3 5566 0612

Fax: +81 3 5566 0619

LONZA Ltd Representation Office Labdarirgo u. 19 H-I047 Budapest Tel: +36 1 169 7178

HUNGARY Fax: +36 1 169 5952

LONZA SpA Via Vittor Pisani 31 - 120124 Milan Tel: +39 2 669 991

LONZA UK Ltd Imperial House Lypiat Road Cheltenham Glos. GL50 2QJ Tel: +44 1242 51 32 I1

INDIA Fax: +91 22 493 25 85

SWITZERLAND

Fax: +41 61 316 8733

Fax: + I 914 428 8859

McWhorter Technologies 400 East Cottage Place Carpentersville IL 60110 Tel: +I 847 428 2657

ITALY Fax: +39 2 669 87630

UK Fax: +44 1242 22 22 94

Fax: +49 281 26503

Tel: +43 732 66 02 94

USA

Fax: + I 310 604 0381

NETHERLANDS Fax: +31418 578 955

Metal Portuguesa S.A. Complas Division Castanheriea do Ribatejo 2600 Vilafranca De Xira A H Meyer & Cie AG Postfach 1629 CH-8040 Zurich

USA

Fax: +1 404 362 4043

Merrem & La Porte BV Postbus 50 5300 AB Zaltbommel

Tel:+351 63 26719 26731

USA

Fax: +1214 875 3322

McWhorter Technologies 2801 Lynwood Road Lynwood CA 90262

Tel: +31 41857 8950

USA

Fax: +1 847 551 3149

McWhorter Technologies 71 Barnett Road Forest Park GA 30050

Tel: +I 310 537 9935

Marine & Elect. Supplies Co. LLC PO Box 43984 Abu Dhabi UAE Tel: +971 2 266 520

Tel: +I 914 428 6501

Tel: +I 404 362 4000

M.u.H. von der Linden GmbH PO Box 100543 D-46465 Wesel GERMANY Tel: +49 281 33830-0

Marubeni Specialty Chemicals Inc 10 Bank Street White Plains New York 10606 USA

Tel: +I 214 875 8634

LONZA Ltd Munchensteinerstrasse 38 P.O. Box CH-4002 Basel Tel: +41 61 316 8111

Fax: +971 4 852 834

McWhorter Technologies 210 Cedar Road Ennis TX 75119

LONZA Ltd India Liason Office Sandoz House Shivsagar Estate Dr. Annie Besant Road Worli Mumbai 400 018 Tel: +91 22 493 87 30

UK Fax: +44 1992 442 422

PORTUGAL

Fax: +351 63 210 86

SWITZERLAND Fax: +43 72 29 74 209

Fax: +971 2 270 677

29

ConfacfDetails Miles Inc Polymer Division Mobay Road Pittsburgh PA 15205-9741 re/:

+I

USA

412 777 2000

Sales Offices: Miles Inc 2010 Main Street Suite 1000 lrvine CA 92714-7206

USA

Tel: +I 714 833 2351

USA

Tel: +I 404 955 4326

USA

Tel: +I 708 692 5560

Miles Inc 1150 Stephenson Highway Troy MI 48083-1187 Miles Inc Raritan Plaza 111 Edison NJ 08837-3605

HUNGARY QoantumFax: +361 117 1379

NCT Hong Kong Ltd Shanghai Office 651 Nanjing Road (W) Shanghai 200021 Tel: +86 21 267 7563

Tel: +46 3461 0100

Tel: +301 412 0137

USA

P.R. CHINA Fax: +86 21 267 8019

USA

Molding Compounds SpA Via Caduti e Dispersi dell’Aeronautica 18 1-24030 Brembate Sopra BG

SWEDEN Fax: +46 3465 9226

Fax: +39 35 62 13 51

USA

Naptha Resins and chemicals Private Ltd 510 ‘Westminster 3rd Floor Cunningham Road Bangalore-560 052 INDIA Fax: +91 80 225 1862

Tel: 621 0691 Tel: 500 884 1519 448 Tel: 534 2801 1534 2902 1534 803

RUSSIA Fax: +7 812 850 1964

Neste Chemicals Belgium 1 Avenue de BBle Bazellaan 1 B-I 140 Brussels Tel: +32 2 729 42 I ?

Tel: + I 401 295 3100

POLAND Fax: +48 22 294 301

Neste Chemicals Leninskj PR. 160 196191 St. Petersburg Tel: +7 812 290 9771

ITALY

GREECE Fax: +301 411 2446

Neste chemicals Bagatela 14 PL-00585 Warsaw Tel: +48 22 292 780

Tel: +I 908 225 1030

Branches: Delhi Hyderabad Madras: 30

Nautik Boat G.M. 1203 Budapest Kovas u.

Neo Marine Ltd 110 Vass-Pavlou Avenue 18533 Piraeus

Tel: + I 810 583 9700

re/: +91 80 226 1877

834 1442 248 5859 12485373 352 953 471 271 1471 015 468 28 1432 72 421789 427196 550 8571 530 997

Neidert Strand A 8 Betongvagen 4 Box 202 S-31123 Falkenberg

Miles Inc 9801 West Higgins Road Suite 560 Rosemont IL 60018-4704

R P Morrison North Kingstown RI

Tel: Tel: Tel: Tel: Tel: Tel: Tel: Tel:

Tel: +361 284 8729

Miles Inc 380 Interstate N. Parkway Suite 200 Atlanta GA 30339-2267

Tel: +3935 62 10 30

DeDotdDealers: Bombay Calcutta Cochin Coimbatore Goa lndore Mangalore Visakhapatnam

BELGIUM

Fax: +32 2 726 8320

Neste Chemicals Benelux Holding B.V. P.O. Box 3199 NL-4800 DD Breda NETHERLANDS Tel: +31 76 227 640

Fax: +31 76 204 029

Neste Chemicals Eesti AS Tobaise 8 EE-0010 Tallin Tel: +372 6 305 275

Neste Chemicals GmbH Monschauerstrasse 1 0-40549 Dusseldorf Tel: +49 211 568 460

ESTONIA

Fax: +372 6 305 259

GERMANY

Fax: +49 271 562 4721

- Neste Resins Oy Neste Chemicals Holding Inc 4400 Post Oak Parkway Five Post Oak Park Suite 1230 Houston Texas 77027 USA Tel: + I 713 622 7459 Fax: +I 713 622 5570 Neste Chemicals lberica S.L. Parque de Negocois “Mas Blau” C/Garrotxa 10-12 Planta Baja 4D SPAIN 08820 El Prat de Llobregat Tel: +34 3 478 7426

Fax: +34 3 478 7145

Neste Chemicals ltalia SRL Corso Buenos Aires 92 1-20124 Milan Tel: +39 2 2952 1571

ITALY

Fax: +39 2 2952 1445

Neste Chemicals Japan Co Nichito Hatsuchobori Bldg 1OF 3-11-8 Hatsuchobori Choun-ku Tokyo 104 JAPAN Tel: +81 3 3206 3530

Fax: +81 3 3206 5365

Neste Chemicals Scandinavia S-44484 Stenungsund SWEDEN Tel: +46 303 85 600

Tel: +358 0 4501

FINLAND Fax: +358 0 4985

Neste Oy Chemicals Trojska 13 a CS-182 00 Prague Tel: +42 2 6641 0906

CZECH REPUBLIC Fax: +42 2 6641 2260

Neste Polyester Europe PO Box 320 Fin-06101 Porvoo Tel: +358 15 541 12

Tel: +358 15 187 12

Neste Polyester S.A. B.P. 1 F - 30150 Sauveterre Tel: +33 66 82 55 73

FINLAND

Fax: +358 15 541 2730

Neste Polyester Finland P.O. Box 320 SF - 06101 POIVOO

FINLAND

Fax: +358 15 187 3306

FRANCE Fax: +33 66 82 52 13

Neste Polyester Inc 5106 Wheeler Ave. Fort Smith Arkansas 72901 Tel: + 1 501 646 7865 Freephone 800 643 6693

Tel: +31 5960 46155

UK

USA Fax: + I 501 646 4279

FRANCE

DENMARK

CANADA Fax: + I 905 712 0901

Neste Resins Corporation 1600 Valley River Drive Suite 390 Eugene Oregon 97401 Tel: +I 503 687 8840

Fax: +45 45 763 132

NETHERLANDS Fax: +31 5960 46157

Neste Resins Canada 5865 McLaughlin Road Mississauga Ontario L5R 188 Tel: + I 905 712 0901

Fax: +33 I 4560 0547

Neste Kemi Danmark AIS Slotsmarken 12 DK-2970 Horsholm Tel: +45 45 763 030

Neste Oy Chemicals P.O. Box 20 FIN-02151 ESPOO

Neste Resins B V P.O. Box 109 NL-9930 AC Delfzijl

Fax: +44 161 439 0200

Neste Chimie France SNC 3 Place Gustave Eiffel Silic 302 F-94588 Rungis Cedex Tel: +33 1 4687 2227

NORWAY Fax: +47 33 185 787

Fax: +852 2 739 7311

Neste Chemicals UK Ltd Cambridge House 37 Bramhall Lane South Bramhall Stockport Cheshire SK7 2DU Tel: +44 161 439 0900

Tel: +47 33 185 160

Fax: +46 303 85 745

Neste Chemicals South East Asia Ltd Room 1105 Wing on Plaza 62 Mody Road Tsimshatsui East Kowloon HONG KONG Tel: +852 2 739 6565

Neste Kjemi Norge AIS Postboks 2022 Stubberod N-3255 Larvik

Neste Re’sins Oy P.O. Box 80 FIN-49401 Hamina Tel: +358 52 749 31

USA

Fax: + I 503 484 6825

FINLAND Fax: +358 52 749 3393

31

Contact Details Neste Singapore Holdings 152 Beach Road #8-01/04 Gateway East Singapore 0718 Tel: +65 298 2353

Norpol Polymer Pte Ltd 27 Pioneer Road Singapore 628500 Tel: +65 86 15 057

SINGAPORE Fax: +65 86 33 986

North Sails SA Cnel F Uzal 3245 Tuario 1636 Olios Buenos Aires Tel: +54 1 799 6220

Fax:

Fax:

UK Fax +441703 629 629 Fax: +44 1703 652 270

Plastics Martime Nova Scotia Plastima Male Bedzany 1 95501 Topolcany

SLOVAK REPUBLIC

Tel: +42 815 27 002

Fax: +42 815 27 002

Polydyne Inc 1606 Pearl Street Waukesha WI 53186 Tel: +I 414 542 8800

Fax:

Fax: +33 4 74 02 39 43

GERMANY

Fax: +49 6327B82-126

USA

Polygard Inc 5010 North Coolidge Avenue Tampa FL 33614 USA Fax: +I 813 871 3467 Tel: +I 813 877 7591 Pontiac Plastics Auburn Hills MI Tel: +I 810 370 900

SPAIN

USA

Pompe-Chemie Handelgesellschaftm.B.H. 8 co Hockegasse 87 A-I 180 Wien AUSTRIA Fax: +43 1 47 44 10 12

Pondus Snickeri Piersgatan 6 11224 Stockholm

SWEDEN Fax: +46 865 13712

Fax: +34 71 718 143

Tel: +468 651 9100

Fax: +34 32 214 160

PP Composites 39c Llandow Industrial Estate Cowbridge CF7 7PB

Barcelona Office:

Tel: +44 446 775 885

32

USA +I 414 542 2305

Tel: + I 770 423 0280 Fax: +I 770 423 0292 Free phone, USA only: 800 842 7063

Tel: +43 1 47 155 40

Tel: +34 32 214 454

USA

Tel: +I 902 450 5777

Free phone, USA only: 800 633 0362

Pinmar SA Contramuelle Mollet 6 0712 Palma De Mallorca Baleares Tel: +34 71 713 744

SPAIN

Fax: +345 563 1219

Polygard Inc 850 Pickens Industrial Drive Marietta GA 30062

Permabond Im Atenscheme155 67435 Neustadt Service Tel: +49 6327B82-231 Technical Help Tel: +49 6327B82-123

Plainsur SA Poligono Industrial La Red Parcela 37-A 41500 Alcala De Guadaira (Seville)

Fax: +I 713 241 5194

Permabond 2.1. Nord BP438 69655 Villefranche sur SaBne FRANCE Service: Tel: +33 4 74 02 39 42 Technical Help Tel: +33 4 74 02 39 40

NEW ZEALAND Fax: +64 9 298 4276

+64 9 571 0542

USA

Permabond Woodside Road Eastleigh Hants SO50 4EX Tel: +44 1703 629 628 Technical Help Tel: +44 1703 619 822

ARGENTINA +54 I 112 350

NEW ZEALAND

Pecten Chemicals Inc P.O. Box 4407 Houston Texas 77210 Tel: +I 713 241 6161

Tel: +64 9 298 8214

Tel: +34 556 31100

Nuplex Industries Ltd PO Box 12 841 Penrose Auckland Tel: +64 9 579 4100

SINGAPORE

Fax: +65 291 1978

PJ Hobbs 63-65 Hunua Road Papakura Auckland

UK

Fax +44 446 775 822

- Reichhold Chimie S A Prior Chemical Industries (M) AND BHD No 26 Jalan USJ 10/1B UEP Subang Jaya 47600 Petaling Jaya MALAYSIA Tel: +60 3 732 6628 Email: [email protected]

Fax: +60 3 732 8628

Fax: +66 2 332 6595

Prior Company (Singapore) PTE Ltd 50 Genting Lane #06-01 Cideo Ind. Complex Singapore 349550 SINGAPORE Tel: +65 784 7560

Fax: +65 784 7562

Prior New Material Ltd Room 210 63 Pan FuRoad Guanghou

CHINA

Tel: +86 20 813 635 19 Fax: +86 20 813 605 43 Email: gzprior@publicl .guangzhou.gd.cn

Progress Plastiques Quebec Tel: +I 819 477 4516

CANADA

Progress Plastiques & Compounds Ontario CANADA Tel: + I 905 670 9490 Quebec:+? 819 477 4516

Pultex GmbH Kunstoff Technikhandel Hans-Bockler-Strasse20 lndustriegebiet Munchhheide 47877 Willich Tel: +49 2154 948 80

GERMANY

Fax: +49 2154 948 894

INDIA

Tel: +91 33 243 1251

Fax: +91 33 243 2680

Reichhold Ltd 4 Robert Speck Parkway Mississauga Ontario L4Z I S 1 Tel: + I 416 848 5540

Reichhold Chemicals Inc 3700 Forum Drive Suite 102 Flower Mound TX 75028 Telr +I 214 539 7343 Reichhold Chemicals Ltd 814 Commerce Drive Suite 102 Oak Brook IL 60521

Fax: +39 35 65 23 08

USA

Reichhold Chemicals Ltd PO Box 13582 Research Triangle NC 27709-3582 USA Fax: + I 919 544 9225 Tel: +I 919 990 7500

Web: http://www .Reichhold.Com

USA

Tel: +I 714 981 1476

Reichhold Chemie AG 5212 Hausen

SWITZERLAND Fax: +41 56 48 24 12

Reichhold Chemie GmbH Breitenleer Strasse 97-99 1222 Vienna

GERMANY

Fax: +49 69 72 79 94

Reichhold Chimie S A 103 boulevard MacDonald 75019 Paris Tel: +33 1 40 35 50 10

AUSTRIA

Fax: +43 1 23 35 19 232

Reichhold Chemie GmbH Reuteweg 51 - 53 6000 Frankfurt am Main 1 Tel: +49 69 72 79 88

CANADA

USA

Tel: + I 708 572 0315

Tel: +43 1 23 35 51

ITALY

USA

Tel: +I 919 990 7500

Tel: +47 56 48 22 22

Reglar Srl Via Enrico Fermi 37 1-2420 Scanzorosciate BG Tel: +39 35 65 23 33

Reichhold Chemicals Inc 2400 Ellis Road Durham NC 27703-5543

Reichhold Chemicals Inc 818 North Mountain Avenue Suite 118 Upland CA 91786

Rasayan Vitrak "Mohta House" 29 Strand Road Calcutta 700 001

-

USA

Tel: +I 704 523 4144

Prior Chemical Industries (Thailand) Co. Ltd 53 Soi Onnuch 21/1 Sujhumvit 77 Suanluang Bangkok 10250 THAILAND Tel: +66 2 332 6594 Email: prioraboxl .net.th

Reichhold Chemicals Inc 9 Woodlawn Green Suite 208 Charlotte NC 28217

FRANCE

Fax: +33 1 40 35 49 71

33

Contact Details Reichhold ltalia Via Montenero 20 21020 Monvalle (Varese) Tel: +39 337 36 86 62

ITALY Fax: +39 332 79 97 01

Reja Spolka 20.0 ul. Ks Chruscickiego 19 PL-02404 Warsaw Tel: +48 22 23 96 01

POLAND Fax: +48 2223 85 75

Resana Participas iies SIA R. Francisco Tramontano 100 3O and 05686-000 SG Paulo Tel: +55 I 1 844 65 33

Tel: +33 46 67 41 16

Resin Services Inc 5959 18% Mile Road Sterling Heights MI 48314 Tel:

+I 810 254 6770

BRAZIL

FRANCE

Fax: +33 46 67 84 16

ITALY

UK

Fax: +44 I91 460 6270

USA

Fax: +34 9 3 867 24 54

Resisa Z. Centro Comandante Zorita 13 Oficina 305 E-28020 Madrid

SPAIN

Tel: +34 91 533 44 26

Fax: +34 91 533 45 85

Resisa Z. Levante Apartado Correos 1055 E-46901 Torrent (Valencia) Tel: +34 96 157 28 84

Fax: +34 96 157 28 84

Fax: +31 47 49 10 33

Sailing Boutique Nautica Travessa das Laranjeiras 34 Foz do Douro P-4150 Port0

Tel: +966 2 651 8920

Scott Bader Co Ltd Wollaston Wellingborough "29 Tel: +44 1933 663 100

PORTUGAL

Fax: +351 2 610 3716

Saudi Industrial Resins Ltd P.O. Box 7764 Makkah Road - Kilo 26 Jeddah 21472

SAUDI ARABIA

Fax: +966 2 651 7072

7RL

UK

Fax: +44 1993 663 474

All regional centres have 24hr answerphone & fax. Scott Bader Co Ltd Units 29/30 Enterprise Trading Estate Pedmore Road Brierley Hill UK DY5 I T X Fax: +44 1384 483945

Scott Bader Co. Ltd Unit 2 Cockerell Close Segensworth West Industrial Estate Fareham Hampshire PO15 5SR UK Tel: +44 1489 589 838

34

UK Fax: +44 1793 827 033

Romar-Voss KG lndustrieterrein Grote Laak 17 NL-6088 NJ Roggel NETHERLAND

Tel: +44 1384 483 955

SPAIN

MALTA Fax: +356 343 419

Robnor Resins Hunts Rise South Marston Park Swindon Wilts SN3 4TE

Tel: +351 2 617 9936

Fax: +I 810 254 6947

SPAIN

fax: +34 1631 9959

RLR Ltd 156 TA Xbiex Seafront PO Box 9 Gzira

Tel: +31 47 49 10 19

Resisa Una Comaiiia Del Grupo CEPSA Ctra Olzinelles s/n E-08470 Sant Celoni (Barcelona) SPAIN Tel: +34 9 3 867 40 00

Ricardo Gomez Gonzalez Avenida de Esparta 57-2"D 28230 Las Rozas Madrid

Tel: +44 1793 823 741

Fax: +39 363 33 02 01

Resinous Chemicals Ltd Cross Lane Dunston Tyne & Wear NE11 9HQ Tel: +44 191 493 2525

Fax: +34 94 437 84 60

Tel: +356 335 591

Resinmec SPA Via CA Treviglo 4 1-24040 Pontirolo Nuovo BG Tel: +39 363 33 31

SPAIN

Tel: +34 94 437 84 60

Tel: +34 1631 7616

Fax: +55 11 844 53 81

Resines Services rue Francois Hennebique 2 A C des Greffieres BP 7 17140 Lagord

Resisa Z. Norte Elkano 11 E-48901 Barakaldo (Bizkaia)

Fax: +44 1489 582 970

- Sirca SPA Scott Bader Co Ltd Unit 1378, Dublin Trading Estate Glasnevin Dublin 11 REPUBLIC OF IRELAND Fax: +353 1 830 8781 Tel: +353 I 830 8044 Scott Bader Co Ltd 129 Laidlaw Street McLaren Industrial Estate Glasgow G5 8LA Tel: +44 141 429 0377

UK

Fax: +44 141 429 6786

Scott Bader Co Ltd Unit 9, Glover Way Lenton Drive Parkside Industrial Estate Leeds L S l l 5JW Tel: +44 113 270 2927

UK

-

Tel: +44 1752 672 000

UK Fax: +44 1752 226 830

Scott Bader Co Ltd Haigh Avenue Whitehall Industrial Estate South Reddish Stockporl SK4 1NU Tel: +44 161 480 9618

Tef:+44 181 551 6221

UK

Fax: +44 161 474 1972

Scott Bader Co Ltd 7 Woodford Trading Estate Southend Road Woodford Green Essex IG8 8HF

Scott Bader Inc PO Box 2163 Hudson OH 44236 Tel: +I 216 342 0035

UK

Fax: +44 181 551 8642

Fax: +33 56263 4908

Tel: +33 322 66 2766

Seemann Fiberglass Louisiana & Mississippi Tel: + I 504 738 6035

Shell Chemical Company PO Box 2463 15th Floor OSP - Resins Houston TX 77252-2463 USA Tel: +I 713 241 8101 Fax: +I 713 241 8107

I-BOO-USA-SHELL

USA Fax: + 1 216 528 0184

(1-800-8727435)

Website:www.shellchemical.com

Showa Highpolymer Co. Ltd Kando Chuo Building 3-20 Kanda-Nishiki-cho Chiyoda-ku Tokyo 101 JAPAN Tel: +81 3 3293 3636

Fax: +81 3 3293 3820

Showa Highpolymer Co. Ltd Matsumura Building 2-15 kyomachi tenmabashi ChUO-ku JAPAN Osaka 540 Fax: +81 6 943 7264

Sier SA Sociedad ltalo Espaiiola De Resinas SA Partida Povet 37 Apdo. Correos 26 12580 Benicarlo (Castellon) SPAIN

-

Tel: +34 964 47 13 16

Fax: +34 964 47 41 71 17

Singapore Highpolymer Chemical Products PTE Ltd (SHCP) 21 Tanjong Penjuru Jurong Singapore 2260 SINGAPORE Tel: +65 268 8255

Scott Bader S A 64 rue Sully F-80044 Amiens cedex 01

FRANCE

Tel: +33 67 64 57 16

Tel: +81 6 943 7570

Scott Bader Composites EURL 1 Impasse Mark Chagall F-23200 Auch FRANCE Tel: +33 56263 6011

427 rue Hblene Boucher 34130 Frejorgues

Technical Assistance Free phone I-800-TEC-EPON (1-800-832-3766) continued next column: Technical Literature via Fax: Free Fax: 1-800FAX-EPON (1-80&329-3766) Product priceqorders or samples:

Fax: +44 113 277 7148

Scott Bader Co Ltd 1 3 Embankment Lane Plymouth Devon PL4 9LQ

SF Composites

Fax: +65 265 6855

S I R lndustriale

Montecatini Group Via Grazioli 33 20161 Milano

ITALY

Tel: +39 2 6333.1

FRANCE

Fax: +33 322 66 2780

USA

Sirca SPA Viale Roma 85 - 35010 San Dono Di Massanzago (PD) ITALY Tel: +39 49 579 7511

Fax: +39 49 579 7262

35

Contact Details S K Sales Private Ltd 2627 Naya Bazar Dehli - 110 006 Tel: +91 I 1 294 4428

INDIA Fax: +91 I 1 292 1259

Swancor Industrial Corporation Ltd No. 9 Industry South 6 Road Nankang Industrial Park Nantou City TAIWAN Tel: +886 49 255 420 Fax: +886 49 251 534 E-mail: [email protected] Web site: http://www.swancor.com.tw

Soloplast S A rue du Pre Didier Z I Le Fontanil Cornillon 38120 Saint-Egreve (Grenoble)

FRANCE Fax: +33 76 56 14 49

Tel: +33 76 75 42 38

Swell Marketing & Services Ltd P.O.B. 3226 Tel Aviv 61031 ISRAEL Tel: +972 3 540 8656

SP Systems Australia Ltd 4b Wilmette Place Mona Vale Sydney New South Wales 2103

AUSTRALIA

Fax: +61 2 99796378

Tel: +61 29979 7248

Synthetic Resins Unit 3 473-475 Warrigal Road Moorabbin Victoria 3189 Tel: +61 3 9553 3525

SP Systems Composit Technologie HandelsgesellschaftmbH GERMANY Lederstrasse 15 Tel: +49 40 540 5363

Fax: +49 40 541 137

SP Systems New Zealand Ltd 10/18 Hannigan Drive Mt. Wellington Auckland NEW ZEALAND Tel: +64 9 527 2257

Fax: +64 9 527 2257

SP Technologies Meridians Cross Ocean Village Southampton SO14 3TJ Tel: +44 1703 232 601

UK

Fax: +44 1703 230 954

Stradour Industries E U R l BP 4 F-32730 Villecomtal sur Arros FRANCE Tel: +33 6264 8422

Fax: +33 6264 8106

Strand Glass S A BP 7517 F-95040 Cergy Pontoise Tel: +33 13037 5185

FRANCE Fax: +33 13037 4949

SP Systems Ltd Love Lane Cowes Isle of Wight Tel: +44 1983 284000

UK

Sun Country Distributor 1424 W Sam Houston North PO BOX800847-77280 Houston TX 77043 Tel: + 7 713 465 0906

Tel: +61 8 8347 4666

AUSTRALIA Fax: +61 8 8347 4554

Synthetic Resins 105 Great Western Highway (Corner Doonside Road) PO Box 6882 Arndell Park New South Wales 2148 Tel: +61 2 9672 7383 ToIIFree: 1800 251 898

Tel: +61 73 808 2000

AUSTRALIA

Fax: +61 2 9672 7707

Synthetic Resins 50 Parramatta Road Underwood Queensland 41 19

AUSTRALIA Fax: +61 73 8080004

Or:PO Box 571 Springwood Queensland 4127

AUSTRALIA

Synthetic Resins 57 Division Street Welshpool Western Australia 6106

AUSTRALIA Fax: +61 9451 2636

Synthetic Resins 62 lngham Road PO Box 5824 Townsville Queensland 4810 Tel: +61 7 7723 766

USA

AUSTRALIA Fax: +67 3 9553 3525

Synthetic Resins 36 Davis Street Wingfield South Australia 5013

Tel: +8 9458 7188

Fax: +44 1983 298 453

Fax: +972 3 648 3759

AUSTRALIA Fax: +61 7 7212 576

Tacoma Fiberglass Alaska, Oregon & Washington

USA Tel: +I 206 272 1258

36

- Vosschemie GmbH Tectra Inc 800 San Antonio Road Suite 2 Palo Alto CA 94303 Tel: +I 415 494 282

USA Fax: + I 415 494 612

Texma Machinery Ltd 12 Totzeret Ha’aretz Street PO Box 9303 61092 Tel-Aviv Tel; 972 369 62313

ISRAEL

Fax: +972 369 62318

Tel: +44 1275 371 030

UK Fax: +44 1275 371 039

Vetrotex (UK) Ltd 3 Oakwell Industrial Park Gelerd Road Birstall Batley West Yorkshire WF17 9LU Tel: +44 1924 420 008

The Houston Company Seattle WA Tel: +I 206 722 7333

USA

Tool Chemical Company Inc P.O. Box 71970 31200 Stephenson Highway Madison Heights MI 48071 USA Tel: +I 810 588 2270 Fax: +I 810 588 5909

AIS TopPlast Maleva poik 3 EE-0110 Tallinn Tel: +372 5 24 82 42

Vetrotex (UK) Ltd The Pines Fordham Road Exning Newmarket Suffolk Tel: +44 1638 721 912

UK Fax:

TUNISIA

CANADA

AUSTRIA

Tel: +43 316 335 78-0/33509 Fax; +43 316 335 78-249

Vianova Resins AG Works A-8402 Wendorf

AUSTRIA

Tel: +I416 630 4833

Tel: +433735 542 150/54320

SAUpag AG Seefeldstrasse 243 8034 Zurich Postfach

Vosschemie Hammer & Makri Ges. mbH Ruckergasse 61 A-I 120 Wien 12

Fax: +43 3135 552 12

SWITZERLAND I 381 5524

Fax: +41

Ureatech (Futura Coatings Europe UK) Ribble Court Silsden West Yorkshire BO20 OQY UK

-

Tel: +44 1535 656 212

Vereguard (Pty) Ltd P.O. Box 4043 Randburg 2125 Tel: +27 I 1 792 92 09

Vetrotex (UK) Ltd 3 Beadle Trading Estate Hithercroft Road Wallingford OX10 9RA Tel: +44 1491 835 335

+44 1638 721 908

Vianova Resins AG Altmannsdorfer StraBe 104 A-I 120 Wien AUSTRIA Tel: +43 I 801 0100 Fax: +43 1 801 7780 Vianova Resins AG Research Centre Leechgasse 21 A-8010 Graz

Fax: +216 1 35 51 65

United Fibreglass Ontario

Tel: +41 1 381 5544

UK

Fax: +44 1924 420 525

ESTONIA

Trimex S.a.r.1. 47 Rue Houcine Bouzaiane 1001 Tunis Tel: +216 1 25 96 67

Vetrotex (UK) Ltd Garonor Way Royal Portbury Dock Portbury Bristol BS20 9XX

Tel: +43 1 815 5131

Vosschemie GmbH Esinger Steinweg 50 D-2082 Uetersen Tel: +49 41 22 717 0

AUSTRIA

Fax: +43 1 8154 513222

GERMANY Fax: +49 41 22 717 158

Fax: +44 1535 657 717

Vosschemie GmbH Zugspitzstrasse 30 8208 Kolbermoor SOUTH AFRICA

Tel: +49 80 31 910 11-14

GERMANY Fax; +49 80 31 910 15

Fax: + 27 11 792 94 81

Vosschemie GmbH Zweilbruckener Strasse 77 8500 Nurnberg 70

GERMANY

Tel: +49 9 I 1 66 28 67

UK Fax: +44 1491 835 591

37

Contact Details Vosschemie GmbH Sandstrasse 61 D-4030 Ratingen

GERMANY

Tel: +49 21 02 44 40 81-83 Fax: +49 21 02 47 41 54

Vosschemie GmbH HeerstraBe 340 D-I 3593 Berlin Tel: +49 30 361 8011

GERMANY Fax: +49 30 361 8013

Vosschemie New Systems Polyester De Moor Mechelsesteenweg 303 2500 Lier Tel: +32 3 489 17 52

BELGIUM

Fax: +32 3 489 17 52

Wah Tech Industrial Co. Ltd No 160 Silom Road I.T.F. 23rd Floor 160/519-521 Bangkok 10500 THAILAND Tel: +66 2 233 3164

Fax: +66 2 238 4439

Waller 8, Wickham Unit 96 Baldoyle Industrial Estate Dublin 13 REPUBLIC OF IRELAND Tel: +353 I 839 2330

Fax: +353 1 839 2362

Werder Systems Postfach 9 CH-8427 Rorbas Tel: +41 I 881 7350

Fax: +41 I 881 7354

SWITZERLAND

Wessex Resins And Adhesives Ltd Cupernham House Cupernham Lane Romsey Hampshire SO51 7LF UK Tel: +44 1794 521 I 1 1

Fax: +44 1794 517 779

West Systems Norge AIS Gjerdrums vei 12 0486 Oslo

NORWAY

Tel: +47 222 33500

Fax: +47 221 80604

XL Yachts Kerekgyarto u. 0 1147 Budapest

HUNGARY

TeUFax: +36 1 252 7453

Yatlantico S A C/Los Olovos S/N. Poligono Industrial de Arinaga Apartado 119 35110 Vecindario Gran Canaria SPAIN Tel: +34 28 18 19 38

38

Fax: +34 28 18 18 02

- Thermoset Resins - A Review

-

THERMOSET RESINS A REVIEW Although there are some exceptions, most of the thermoset resins listed and described within this Databook are received by the purchaser as viscous liquids, typically but not necessarily in solvent monomers. During the process of first forming and then moulding the composite of matrix resin and fibre reinforcement into the desired component, that liquid state is converted into an irreversible solid by the chemically activated, timetemperature sensitive process known as polymerisation. The following layman’s description, relative to unsaturated polyesters‘, provides a very suitable illustration of that molecular process. ”The cross-linking reaction takes place by what is called a free radical reaction, which can be visualised by nailing wooden boards together. The boards are the (molecular) chains of resin and the nails, the reactive styrene monomer which also acts as a (resin) solvent. The boards without any nails in them can be moved and the positions changed, as the polyester chains can be moved in the liquid state. By nailing the boards together, the movement of the boards is restricted. They can be moved but not separated. By hammering in more nails, the boards can no longer be moved with respect to each other, a situation indicative of a fully cured, (or polymerised), situation.” Although polymerisation is common to all thermosets, there are as highlighted in a brief overview below, distinct and important differences between the various resin types. These are fully employed to commercial advantage by the world-wide composites industry, using a now wide-ranging production technology’, ’ to satisfy a wide diversity of market and application. Modified Acrylic Resins Typified by those supplied under the trade name Modar, these high molecular weight, high reactivity solutions of oilogourethane methacrylate in methyl methacrylate monomer, were developed some years ago for closed moulding techniques such as resin transfer moulding (RTM) and pultrusion. Their low viscosity enables high inorganic (e.g. aluminium trihydrate) filler loadings, offering property and flame retardancy advantage. Although then not as good as the intrinsically firehard phenolics, their ‘low-smoke/low toxicity’ property is superior to the low-smoke unsaturated polyesters. They are polymerised with the same peroxide initiators as employed for polyesters, and permit other chemical ‘modification’ such as the addition of styrene or an epoxy molecular chain, hybrids which find application as adhesives and prepreg matrices for both ‘commercial’ and ‘advanced’ composites applications. Phenolic Resins Both novolak and resol type phenolics find composites application, the former typically for the manufacture of sheet and dough (bulk) moulding compounds, with the latter for what can be termed ’wet‘ processing. Both are the condensation reaction of two monomers, a phenol and an aldehyde, where formaldehyde in the most common. Their outstanding, and intrinsic, very low-smoke, very low-toxicity fire retardancy advantage over all other commercial thermoset resins, is the predominant reason for their considerable and everincreasing acceptance in all fire safety applications4,within the aerospace, construction, rail, mass-transit and shipping markets. Unsaturated Polvester Resins Whether they are ‘flexible’ or ‘rigid’, of ‘low’, ‘medium’ or ‘high’ reactivity, or are ’general purpose’, ‘fire retardant’ or ‘chemically resistant’ in nature, unsaturated polyesters’, whether they are also orthophthalic, isophthalic, tetraphthalic or another chemical variant such as neo-pentyl glycol based, are and will perhaps for ever remain, the workhorse of the composites industry. That wide diversity of type and grade, with its respective mechanical and physical property improvement, offering an equal diversity of application utilisation - and not forgetting the all-important gelcoat versions is the principle reason for that situation. Finally there is their ease of use across virtually all of the rnoulding-fabrication processes open to the component manufacturer.

-

41

Databook -

Bisphenol-A, Epoxide & Vinyl Ester Resins Offering for example enhanced heat and chemical resistance over even the best tetraphthalic polyester, there is close chemical relationship between the other two and the bisphenol-A starting point, a condensation product of phenol with acetone under acidic conditions. Then come those epoxides which, as a product of a further reaction between bisphenol and epichlorohydrin, are applicable to composites. In turn the vinyl esters can be considered as an epoxy resin backbone with terminal acrylic ester groups, dissolved in or diluted by similar to unsaturated polyester a monomer like styrene, which can itself be polymerised. All’ are chemically cured or promoted, with or without the addition of heat, although the epoxides are more selective to the use of amines for this purpose, than the other two where the peroxides are the more common.

-

References

1. 2.

3. 4. 5. 6.

42

“ApplicationsManual“ Cook Composites 8 PolymersKray Valley. “Composites - A Profile of the Worldwide Reinforced Plastics Industry, Markets 8, Suppliers. Edition 2” Elsevier Advanced Technology (1995) ISBN 1 85617 224 4 “Reinforced Plastics Handbook” Elsevier Advanced Technology (1994) ISBN 1 85617 217 1 “Specificationfor Wet Processed Phenolic Resin Mouldings” CPAS 1. 1997 Composites Processing Association, UK. “Unsaturafed Polyester Technology” Bruins P F , Gordon 8 Breach Science Publishers (1976) “Plastic Materials” Brydson J A, Butterworth Heinemann (1991)

-

- Comprehensive Index: Adhesive Pastes & Resins COMPREHENSIVE INDEX : PRODUCT TYPE & PAGE LOCATION Every attempt has been made to ensure as comprehensive an index as possible, without an inordinant number of main or subclassifications. It has therefore been necessary on occasion and applying particularly to unsaturated polyesters to be selective, choosing only those descriptions - typically the two which appear the most important as subclassification. However at the same time, much depends on the resin property, application or other description initially provided by the manufacturer or supplier, and here some assumptions have proved necessary. Further, such understood property descriptions such as for example 'corrosion-resistant' for isophthalic-NPG resins, have not been included.

-

-

-

Each reference should therefore be used as a guide only to the likely location of additional, alternative systems. Their separate descriptions as tabulated later should then be employed as a 'first-filter' choice, prior to contacting the manufacturers/suppliersto request more defintive technical data, from which a final optimum thermoset resin choice/s can be made.

-

-

Italics have been employed to signify a registered trade-name, but is only quoted once where several resins of the same manufacture/supplier,can be grouped. Page numbers are shown in bold.

-

Acrylic Laminating Resin Cold-press Filament winding Flame retardant Hand/spray High-impact Low profile Pultrusion RTM

Ashland Chemicals

Modar 824LTS, 035ACS, 865 Modar 814 8 15,865 Modar 814, 815, 816, 826HT Modar 814,815,816 Modar 839 Modar 824LTS, 826HT Modar 826HT Modar 814 8 15,816,835ACS, 039, Modar 865,824LTS Modar 814

119 119 119 119 119 119 119 119 119 119

Ciba Specialty Cytec Engineered Bryte Technologies Cytec Engineered Brtye Technologies Ciba Specialty

Araldite 326 MeUbond 2550 EX-1516, EX-I 543 Mebond 2555 EX-I 508A, Tack'n Roll Araldite W N A , 312,312L, 312UL Araldite 312/5,319,322,330,3351( Araldite 609, R302-3 FM 07-1,123-2, 123-5,275, 300-2, 355 SP80 RS-4, RS-4A, RS-4LT Microply SF-4 Microply SF-I, SF-2, SF-3, SF-GC, SF-6N, RS-15H Microply EM-3, EM-3N, EM-6 Microply SF-5 Microply EM-5

77 324 76 324 76 77 77 78 323 298 325 326 326 325 325 325

Lord 406117, 410117, 506117,660

325 82 324 323

USDA approval Adhesive Film Bismaleimide Cyanate ester Epoxy

- on glass carrier Polycyanate Syntatic, - bismaleimide epoxy epoxy, expanding polycyanate - ' , expanding

Cytec Engineered SP Systems YLA Inc

-

-'

Adhesive Pastes 8 Resins Acrylic Bismaleimide, Cyanate ester

Cyanoacrylate Epoxy

continued:

- foaming

Lord Corporation Petmabond Cytec Engineered Bryte Technologies Cytec Engineered Petmabond Lord Corporation Adtech Ashland Chemical Ciba Specialty

F246 Metlbond 6604-1 8 R 450-7 EX-1502-1 EX-I 537, EX-I 537-1 MeUbond 6555-1 C791 Lord CA Gel & Accelerator EA-602, EA-604, EA-, EA-621 Pdygrip 7300,7400,7700,9400 AraJdite 203,204 Araldite 403,420AlB Araldite 2010,201 1,2012,201 3,201 4 AraJdite 2015,2016,2017,2018,2019,2020 Araldite XD4424JXD4425

75 76 324 81 326 75 75 76 77 78 78 79

43

Databook

-

Adhesive Pastes EL Resins continued: Cytec Engineered Epoxy

Radar transparent

Cytec Engineered

Repair, epoxy

Ciba Specialty

Syntatic foam, epoxy Urethane Urethane acrylate Vinyl ester

Cytec Engineered Lord Corporation Scott Bader Show

FM 73,94, 235, 350NA, 377,400NA, 410. 410-1 323 Metlbond 113,1146, 1515 324 Pro-Set 175 324 A0420, A0420FS, MA300, MA310, MA320 80 MA330, MA422, MA425, MA555 80 M A W , MA550, MA3940, MA3940LH 80 (Also some on 324) Lord 310NB, 3201322, 363NB 324 E01, E04, E l 1 81 E15, E32 82 HST-5, WB-400 82 SP Handipack 83 SP 106, SP 320, Spabond 120,125 83 Spabond 130 84 Duratec Epoxy Bond-Cote 297 Araldite AW2105MD4419 79 Araldite XD4457MD4412, XD4457MD4458 79 Araldite 206-NA, 20W5-NA, 212-NA 76 Arald'te 21912-NA, 21913-NA 77 BR495, FM 27, 404NA, 49OA 323 1020. Metlbond 1305-1 324 FM 1020 324 Araldite 2021,2022,2023, XD4664AJB 79 Araldite XD4665NB 80 FM 61, FM 300 323 Beetle 8937 76 Viscovoss KL4 84 FM 32 323 HT 424 324 FM 50, 55, 57,680-1 323 680-2,lOoo 324 Araldite XD4436lXB5304 79 Uralane 5774NB 80 Araldite XB5090-1MB5304 79 AraMite XD445OMB5304, XD4465MB5304 79 Araldite XD4467MB5304, XD4485/XB5304 79 FM 32, 680-1 680-2 323 Metlbond 66041 324 Araldite 501 78 Epibond 156NB, 1559NB,1567AJB-40,1568NB 80 FM IO, FM 12 323 Lord 754WB, 754WE, 7610,7660 326 Crestomer 1152PA, 11MPA, 1196PA 83 CP-819 EX-I, 804BDA RED EX-I 83

Cytec Aerospace Fiberite Inc YLA Inc

52504RTM 986 RSS, RSBHT

120 120 327

Lonza SpA Singapore Highpolymer Borden Chernical

Disfitron 35608 LPSQILPSBQTN Epophen EHA-77 Epophen EHT-86, EHT-88 Tabulation other hardeners Epophen ELS, EL-62, ET-3A Epophen EL67, EL68 Derakane 411 Series Derakane 510 Series Distlttvn 35608 Fuli 889 Polynex GR 200-30 LPSQILPSBQTN Sirester BS 62 viscovoss w45 W F R , K299FR Derakane 510 Series Sirester ES 0866M Atlac 35151A, 4010lNHV Viapal F195E Atlac 387

136 140 124 126 126 124 126 128 129 136 134 138 140 140 I44 122 129 141 130 143 129

Gougeon Brothers ITW Plexus

Lord Corporation Permabond Resin Services SP Systems

-

Epoxy Polyester bonding agent Epoxy - Sandwich const.

Hawkeye Industries Ciba Specialty

Foaming epoxy Cytec Engineered Fuel barrierhvet wing application Methacrylate Nitrile epoxy Ortho. polyester Oxyimide Phenolic-epoxy Polyimide Polyurethane

Ciba Specialty Cytec Engineered BIP Vosschemie GmbH Cytec Engineered

Ciba Specialty

-

Polyurethane panel const.

-

Bismaleimide Laminating Resins

-

BisphenolA Laminating Resins Centrifugal casting Cycloaliphatic polyamine cure

-

Epoxy type

- brominated Filament winding

Flame retardant Flexible

- monomer free 44

Dow Chemical

Lonza SPA Jiangyin Crabec Naptha Resins Singapore Highpolymer SIR lndustriale Vosschemie AlphdOwens Dow Chemical SIR lndustriale DSMoBASF Vianova Resins DSM-BASF

- Comprehensive Index: Cyanate Ester - Laminating Resins Fumarate type

- polyester type 'General purpose'

Naptha Resins Reichhold Saudi Industrial Vianova Resins Ashland Chemical Ashland Chem. Hispania Borden Chemical DSMoBASF Huntsman Singapore Highpolymer SIR Industriale

Hand, spray

Potable water use Pultrusion RTM Solid type UV stabilised

Vianova Resins Vosschemie Lonza SpA Naptha Resins Singapore Highpolymer Vosschemie Borden Chemical Singapore Highpolymer Ashland Chemical Borden Chemical Naptha Resins

137 138 332 143 122 124 125 129 129 134 140 141 141 143 144 136 138 140 145 124 140 123 125 137

Polflex GR200-30 Dion 6694lGA (No information provided) Viapal H495 et al Hetron 700, 700G AC-8982 EL17,18,23 and 24 Atlac 382/PJTIHV Powder & Flake Hetron 700 LP-8QlLP-8BQTN Sirester BS O W R , BS 0953 Sirester BSW 500. BSW 0937 Viapal F 195E viscovoss w45 Distitron 35608 Polyflex GR 200-30 LP-8QILP-8BQTN viscovoss w45 Epophen EL-5 LP-8QILP-8BQTN Hetron 700RT Epophen EL65 P w e x GR200-32

-

Cultured Marble (Artificial or Polymer Marble) Resins For (See also Polymer Concrete, Onyx, & Resin For Casting, Encapsulation 8 DecorativeWare) Breton process

Resisa Vianova Resins DCPD polyester DSMoBASF Gelcoats see Gelcoats, Cultured Marble lsophthalic DSMoBASF IsolNPG Gwil Industries Marubeni Specialty McWhorter Tech NPGIOrthophthalic AlphdOwens Cook Composites

-

Orthophthalic

Alusuisse ltalia Lonza SpA Jotun Polymer Marubeni Specialty Naptha Resins Neste Reichhold Chemicals

Resisa Singapore Highpolymer Vianova Resins Cook Composites

Resilient Unclassified

UV stabilised

Lonza SPA DSMoBASF Gwil Industries Huntsman Marubeni Saudi Industrial Cook Composites DSMoBASF Jotun Polymer Resisa

Resipol9016,9026 Viapal VUP 4533E Synolite 8175-X-4

251 253 242

Palatal K763V w-2253, w-2255 Polymar PMI90 748-3645 54763,8463DM Stypol 40-4901,404908,40-4917 Stypol 40-5903 Distiiron 417 Distitron 417 DV20 Norpol 360-100 Norpol440-099 et al Polymar PCM 202 8 PCM 204 Polyflex GR 200-09 G103E, S280E, S380 Polylite 32109-10,321 2405, 3212412,321 35-00 Polylite 32136-00, Polyite Procast32144-02 Polylite Procast 32144-07, 3214524, 3214525 9041 Resipol' -EL, 2719 Viapal H270BlBE. H2711B Stypol 40-5711,40-5722, 40-5739 Stypol40-5845 Disitron 2lBN V5, 619A Synolite 032EA-1 W-2219, W-2225, W-2227 Silmar SIL 90BA-585, SIL 90BA-627 et al, SIL 94BA-854 Polymar PCM 402 & PCM 404 (No details provided) StyPOl40-4901,40-4908. 40-491 7 Synolite 0328-A-1 Norpol 440-M515 Resipol 9006-EL

242 243 248 248 239 240 241 333 247 245 246 247 248 248 249 250 250 251 252 253 240 241 247 242 242 244 248 332 240 242 246 251

-

Cyanate Ester Laminating Resins Aerospace application Autoclave fabrication High temp. cure - 121O C - 177oc

Fiberite Fibercote Fiberite Bryte Tech.

954-2A V-376 9542A, 954-3 BTCy-3, EX-151511515-1 BTCy-111A, BTCy-2, EX-1505

132 131 132 126 8 127 126

continued:

45

Databook

-

-

Cyanate Ester Laminating Resins continued: Fibercote Fiberite 177°C cure, flame retardant Brtye Tech. Prepreg manufacture Fibercote Fiberite Resistant hot-wet Bryte Tech. Fibercote - thermal cycling Bryte Tech. RTM fabrication Fibercote

V-376 954-2A, 9543 EX-1509 V-376 9544%. 9543 EX-1530, EX-1532 V-376 EX-151511515-1 EX-1510 EX-1545 V-376

Ciba Specialty

Araldite 252, 255

Aerospace

Fiberite

Autoclave fabrication

Brtye Tech. Fibercote Fiberite

934,938,948Al 949 131 132 970,976, 977-1 977-2, 977-3, 984 7665,7669,7701,7714A, 7740.7764 133 BT350E-1 126 131 E-770, E-795, FCE-722 131 934,938 132 950,970,976,977-1 977-2,977-3,984 133 7665,7701,7714lA, 7740,7780 131 E-761 120 EL-318 128 Epicast NAB46 127 EX-1522, EX-1539 130 E-710 (FR) 131 E-761, E-770 132 7251 133 7665,770117714/A, 7764, 9771A 328 RS-6, RS-6M 127 EX-1538 142 SP Ampreg 20, Ampreg 26 138 HST-5, HTR-250 139 PX672C 141 SP 631 142 SP Ampreg 20 328 RS-1. RS-7. RSJC RS-11, RS-13, RS-17, RS-22, RS-23, RS-25, RS-26 329 328 Pro-Set 117, 125, 135, 145 AME 5000 122 BT250E-112 125 E-772 131 948A1,949 131 7740, 7780 133 7251 132 7701,7714/A, 7764, 97714A 133 950 132 BT350E-1 126 E-720E, E-722 130 E-755G, E-767C, E-770, E-795, FCE-722 131 934,938 131 970,977-1, 976, 977-2, 977-3,984 132 7669 133 E-746 130 7665 133 AME 4000,5000 122 7780 133 E-772 131 BT350EX-A 126 EX-1522 127 FCE-722 131 BT250E-112 125 E-710(FR), E-720E, E-722, E-746 130 E-761, E-770, E-795, FCE-722 131 Atlac 590lHV 130 128 8 129 Derakane 470 Series EX-l531IA, EX-1547 127 934,938,948Al 131 132 950, 970, 976, 977-1, 977-3, 984 7669, 7740, 7780 133 142 SP Arnpreg 20, Arnpreg 26

-

-

Vacuum bag fabrication

Epoxy - Laminating Resins Epoxy Filler Paste

131 132 126 131 132 127 131 126 8 127 126 127 131 258

I

BMS 8079V approval Flame retardant

Fibercote Adtech Ciba Polymers Bryte Tech. Fibercote Fiberite

Filament winding fabrication 'General Purpose'

YLA Inc Bryte Tech. SP Systems Resin Services Robnor Resins SP Systems

YLA Inc 'Infusion' processing Low voc High temp. cure 121°C

-

Gougeon Brothers Ashland Chemical Brtye Tech. Fibercote Fiberite

- 121OC, flame retardant

- 150°C - 177OC

Brtye Tech Fibercote Fiberite

- >18OoC Marine application Medical application Microwavehadomeapplications MIL-R-9300 approval Novolak type Prepreg manufacture

Fibercote Fiberite Ashland Chemical Fiberite Fibercote Brtye Tech. Fibercote Bryte Tech. Fibercote DSM*BASF Dow Chemical Bryte Tech. Fiberite SP Systems

46

- Comprehensive Index: Filler Paste - see also Putty & Paste - flame retardant Primary structure use Racing vehicle use

YLA Inc Fibercote Fiberite Bryte Tech.

Resistant hotlwet conditions

Fiberite Ciba Polymers Fibercote

Room temperature cure

Adtech

-

Akemi Ciba Polymers Resin Services

-

flame retardant flexible RTM fabrication

Sporting goods use Submarine application Thin-skin laminates Tubular products application

Adtech Resin Services Ciba Specialty Cytec Aerospace Brtye Tech. Resin Services Shell Chemical SP Systems Brtye Tech. Fibercote Fiberite

Vacuum bag fabrication

Resin Services Fiberite Reichhold Resin Services SP Systems Brtye Tech.

Vinyl ester type

Fibercote Fiberite Shell Chemical SP Systems Dow Chemical

Wind/surfboards

RS-24 E-71O(FR) 7665,7701,771 4A. 7764.9771 4A BT350E-1 BT350E-1 977-2 Epicast 5 W B E-722 E-770, FCE-722 EL-301, EL-301LP. EL-302 EL-302PC, EL-302PC-LP. EL-326, EL-326-1, EL-326-2 AL2103, AL2108, AL2118 Araldite 501 Epcast 50AI946 HST-5, HTR-250 HTR-386. LR-105, WB-400 EL-318 HTR-212 Resinfusion 860118602 Resinfusion 8610,8611 Cycom 823 RTM EX-1538 HTR-386 Epon RSL-2704RSC-2705 SP Ampreg 20, Ampreg 26 BT350E-1 E-772 948A1'949 7780 LTR-105, WB-400 950 Atlac 580-05lA WB-400 SP115 BT250E-112 BT350E-1 E-795 7665,7669,7780 EpOn RSL-27WRSC2705 SP Ampreg 20 Derakane 441-400 Derakane 8084 Series

329 130 133 126 126 132 128 130 131 120 120 120 121 127 128 138 139 120 138 327 328 128 127 139 139 142 126 131 131 133 139 132 138 139 141 125 126 131 133 139 142 128 129

Epoxy Resin Modifier

SP Systems

SP Ampreg Pregel

298

'Filled Applications' 'General Purpose systems'

Gwil Industries

W-1827128. W-2221 W-2297196, W-2273/74, W-2283184,W-2285/86 N O p l 451-Oo0,451-510 Dynopol 2938lA Silmar S465 Roskydal K27 W-1845

242 243 247 249 249 253 242

No. 15 Araldite 252, 255 SP S'Fill 400 No. 15 No. 15 APF 1 APF 4 No. 14 No. 36 Model Filler, Viscovoss KL1

257 258 26 1 257 257 257 257 257 257 262 257 257 258 258 258

Orthophthalic

Resilient resin Filler Paste -see also Putty 8 Paste BMS-5-136A approval Epoxy based FAR 25.853 approval Fire retardant Impact resistant Low shrink MMS 101 MDJlJ3808 approval Mould making and repair Polyester based Sprayable Styrene free

Jotun Polymer Norpol Polymer PP Composites Vosschemie Gwil Industries Adtech Corp Ciba Specialty SP Systems Adtech Corp Akemi Inc Adtech Corp Vosschemie Adtech Corp Akemi Inc

No. 10, No.36 APF 3, APF 5 APF8, APF9 APF 1700 APF6, APF7

47

Dafabook Flexibilising Resins Adipic acid type Biphenol-A type Chemical resistant Isophthab acid type

NovolaWadpic acid type Orthophthalic type

- for button application Unclassified type

Urethane actylate type Flooring Resins Epoxy type Orthophthalictype Vinyl ester type

Ashland Chem. Hispania Resisa Vianova Resins Alusuisse ltalia Ashland Chem. Hispania Jotun Polymer SIR lndustriale Sirca SPA Vianova Resins DSMoBASF

FS-59 Resipol 9404 Viapal F195E Distitron 166 IS-0842 Norpol 750-000/500 Sirester IS 0842 HPR P104 Viapal F185E Palatal E200 Palatal E220, E250 Jotun Polymer N o r p ~ l470-000 SIR lndustriale Sirester FG 0819 Viapal F140 Vianova Resins Viapal F120E Alusuisse ltalia Distitron 166, 131OSC Ashland Chem. Himania FS-57 BIP Ltd Beetle 8797 DSMmBASF Palatal E231 lnterplastic Corp Silmar SIL 0588-465 et al. SIL 17BA-628. SIL 17DA-384 Silmar SIL 17DA-712, SIL 17DB-900 Jiangyin Crabec Fuli 182,183 Neste S703 Resisa Resipol 9412,9424 Scott Bader Crestomer 1080

303 304 304 304 305 305 305

Swancor Industrial lnterplastic Corp Swancor Industrial

Swancor 61 10,6120,6130,6140,6150,6160 Silmar SIL 65BQ-249 et a1 Swancor 6910,6920,6930

320 319 320

Blagden Jotun Polymer Vianova Resins Resinous Chemicals

82-15-125 Norpol 420-960/970 Viapal VUP 4688BT Wresipol 31454

314 314 314 314

Ashland Chemical

Hetron 800

151

Reichhold Chemical lnterplastic Corp Resisa

Polylite 32356-00,32357-00,32358-00 Silmar SIL 05BB-465 Resipol 9433

Vianova Resins Borden Chemical Naptha Resins Futura Coatings Hawkeye Industries SP Systems

Viapal 9358, 8 935BE Epophen ET-3A Pdyr7ex GR 200-31 Gelcoat enhancer Duratec Hi-Gloss SP127. SP531

113 95 95 297 87

Polygard Inc Reichhold Chemicals Cook Composites Ferro Corporation HK Research Naptha Resins Vianova Resins Polydyne

Cleargard Polylite 32737 Stypol 40-4901140-4908,40-4917 Ultraclear G-1175 Series Polyflex GR 200-17-1, GR 200-18-1 Viapal 464788, 4647BES 150 Series Marble Clear

327 250 102 103 106 109 113 110

Vianova Resins BIP Scott Bader

Viapal 9228 Beetle 8184 Crystic 48PA, 65PA 90PA, 91PA 8 93PA Viapal 46348 8 4634BE Norpol NPA

113 101 111 111 113 107

303 305 306 338 303 304 306 305 306 303 303 304 305 306 306 338 303 303 ~~.

Flowcoats (see also Topcoats) Foaming Resins Orthophthalic polyester Unclassified type Furane Laminating resin

-

Furniture Fittings Resin for (Simulated wood)

Gelcoats Aromatic solvent resistant Bisphenol A, epoxy Enhancer Epoxy Cultured marble - finishing resin

- NPG/iso - UV stabilised - Unclassified, UV stabilised Flame retardant HET acid based - Isophthab

-

- ISolNPG 48

Vianova Resins Jotun Polymer

250 297 EL 304 298

9s

- Comprehensive Index: Gelcoats - Unclassified type Foodstuff use 'General purpose' Acrylic modified lsophthalic

-

- UV stabilised - IWNPG

- UV stabilised - ISolNPG, LSE - Iso/polypropyleneglycol

- Orthophthalic - UV stabilised

- OrthdNPG

- NPG, UV stabilised - Unclassified type

GTI Process

Jiangyin Crabec Scott Bader Polydyne BIP Cook Composites Gwil Industries Llewellyn Ryland Lonza SpA Naptha Resins Saudi Industrial SIR lndustriale Vianova Resins Vosschemie Alusuisse ltalia Cook Composites Ferro Corporation Ferro Holland Gwil Industries Jotun Polymer Marubeni Specialty Naptha Resins Polygard Inc Saudi Industrial Scott Bader Singapore Highpolymer SIR Industriale Vianova Resins Jotun Poylmer Ferro Holland Jotun Polymer Lonza SPA Naptha Resins Scott Bader SIR Industriale Naptha Resins Polydyne SIR lndustriale Ferro Coporation A C Hatrick Akemi BIP Dulux Australia Ferro Holland

Huntsman Chemical Gwil Industries Jiangyin Crabec Norpol Polymer Pte

- 'Low VOC' - Sanding

- UV stabilised -

Vinyl ester Granite continued:

Polydyne Polygard SIR lndustriale Ferro Corporation Ferro Holland Gwil Industries Huntsman Chemical Neste Polyester Vosschemie Naptha Resins Polydyne

GL 102 Kara, GL 111 Soma GL 120 Dara, GL 132 Trim GL231 Ditra FUR-I03FR Crystic 92PA 101 Series Beetle 8182, Beetle 8288 Polycor PB-14 45 Series TD02, TD03 & TD25 Distigel 118 Polyflex GR 200-21 (No information provided) Sirester ISG 0818, 0818/C Viapal 921B, 921BE & 921E Viapal 9208 (S), 920BE & 920E Viscovoss G327SB DisMron 151 Lovocor 962-WA-196 Polycor PB-13 Ultraclear, Ultraplus NN 29,31, 35 Series NorpolCPG, GF, GS, NGA Polymar PMG91H, 91S Polyr7ex GR 200-18-1 Exterior Grade (No information provided) Crystic 69PA, 92PA G3253T, G3253T-NC Sirester ISG 0839 Viapal 9308, 930BE, 931B, 931BE Viapal 4647BS & 4647BES Norpol STL lsogels 1 IN NorpolGP Distigel 3519A Polyflex GR200-11 Crystic 25PA Sirester FG 0819 Sirester FSG 0820X Polyflex GR200-17-1 101 Series Sanitary Siresfer FSG 0913 Ultrashield Aquaguard APG 1725, 1750 Beetle 8287 (Various) A, AO, ES, F, FGM, G, G/A, GFN G/RA, GRS, GS, HP, I, IR, NF NN, NQ, S, SA, SAIE, SIRA ST, SlST Aropol 6006 Estarez 514P & 5 2 m 50 Series f Uli-I 02, 202 GP2000H1, GS, GX1, 119H1, NGA, GA116S1 132 Series Transportation Interior Grade Sirester CD4 Low voc Low voc 16 Series Aropol 5004, 5023 Maxguard 29, 99 Viscovoss G311SB Polyflex GR 200-62 Polyfock 111 Series

106 105 106 106 111 110 101 102 105 108 108 109 332 112 113 112 113 326 101 102 103 103 105 f07 108 109 327 332 111 112 112 113 113 107 103 103 107 108 108 110 112 112 109 110 112 103 100 101 101 95 EL 103 104 104 104 104 106 106 106 106 109 109 110 327 112 103 104 105 106 109 113 95 110

49

Databook

-

Gelcoats - continued: Marine Approved

BIP Ferro Holland Jotun Polymer Llewellyn Ryland Naptha Resins Neste Polyester Nuplex Industries Polydyne Polygard Inc Scott Bader Singapore Highpolymer Vianova Resins

-

Flame retardant Metallic Polymer Concrete etc. Potable Water use

-

Repair Iso/Ortho Silk Screen Printing SMC application Tooling lsophthalic Iso/NPG.

-

- Iso/Orthophthalic - Orthophthalic

Scott Bader Cook Composites Ferro Corporation Llewellyn Ryland Scott Bader Jotun Polymer Ferro Corporation Ferro Holland Jotun Polymer Lilly Industries Scott Bader Jotun Polymer Ferro Corporation Hawk International

- Unclassified

- Vinyl ester

-

Vinyl esterlsophthalic Urethane based Wine & spirits use Hybrid Systems Marine application SMClBMC application Unclassified Urethane actylate impact Modifiers In-Mould Coatings Acrylic urethane Aliphatic urethane Epoxy Gelcoat alternative 'Gelcoat' for phenolics Polyester Polyester/acrylic

50

Jiangyin Crabec Cook Composites Ferro Corporation Ferro Holland Gwil Industries Jiangyin Crabec Norpol Polymer R e Ltd Polydyne Polygard Inc Vianova Hawk International Showa Jotun Polymer Futura Coatings Scott Bader Scott Bader Ashland Chemical Vianova Resins

Beetle 8182,8287,8288 lsogels 1, IN, NN Norpol CPG, GS, NGA, STL TD02, TD03, TD25 Polyflex GR 200-18-1 Maxguard GN Chromocoat 105 Series Marine MetaMake Crystic 33PA Crystic 69PA, 92PA G3253T, G3253T-NC Viapal 9208 ( S ) ,920BE, 920E Viapal 921B, 921BE 8 921E, 4 2 4 B Crystic QOPA, 91PA Polycor PB-4/946, HPM's Ultraclear TD02 Crystic 65PA, 69PA Norpol SP I

S Impress PC, IPC, NV & SV Norpol GT 5783B90001 Crystic 12PA Norpol SP G, M, MV& S Ultratooling Ultra 1 SP Sandable Durabuild, Polyester Durabuild, Super FUli - 101 945 Series Ultrafooling Ultra 1 - SP Sandable (Various) 16, 30 Series Fuli 101 GM 151 Series Tooling Unumbered Viapal 9358, 935BE Durabuild, Vinyl Ester GM-820 EX-1, M-820 EX-1 Norpol GM Ultrachrome 4000 Serjes Crystic 69PA

-

101 103 107 108 109 109 110 110 327 110 111 112 112 113 111 102 103 108 111 99 104 103 99 99 100 99 98 98 98 98 98 & 99 99 97 98 98 98 98 99 100 100 326 100 99 100 99 114 111

Scott Bader

Crestomer 1220PA Envirez 2431 Additol VXT 6225 Viapal VUP 4759/1272 Crestomer 1174PN1220PA

144 144 144 145 144

DSMoBASF

Synolite 1537-X-l17248-M-1

337

Futura Coatings

Ultrachrome 2ooo Ultrachrome 3ooo CR3400 5775W90019, Impact RTM 5788E90003 Crystic Protec GM Annorcote IMC PB-11 (Various) Impact Primer 5788E90009

SP Systems Lilly Industries Scott Bader Ferro Holland Cook Composites Dulux Australia Lilly Industries

96 96 96 96 96 96 95 95 88 & 308

- ComprehensiveIndex: Phenolic - Laminating Low Profile Additives Methyl methacrylate

& Other Resin Systems

Cray Valley Interplastic Corp

Synolite 8199-M-1 9886 Synolite 1080-M-1 Synolife 2681-X-I ,7248-M-1, 7463-M-1 LP40A, LP85, LP90, LP 4016 Beetle 8910,891 1 Synolife 7223-M-1 9880,9884,9885 SiresterA787, A792, A796, A804 Swancor 7310,7311,7320,7360,7410 Additiol VXT 4903, VXT 4956,VXT 5923 Aropol 59036 Arofech 2002 Aropol 590796 Norsodyne A151, A154,A158 Silmar SIL 20LP-846

339 316 339 339 315 316 339 316 317 317 317 315 315 315 316 316

Blagden Cray Valley Huntsman Chemical

81-1638T Norsodyne 6395502,651 3 crystic 6015

240 241 243

Reichhold Chemicals Singapore Highpolymer Vianova Resins Gwil Industries Interplastic Corp Jiangyin Crabec Jotun Polymer Marubeni Specialty McWhorter Tech PP Composites

Polylite Procast 3216 2 4 , 32145-25, Polylife 32153-00 2719 Viapal VUP 4626BE w-2219 Sillmar SIL 92BA-793C, SIL 9 4 B A W Fuli 85 Artware, 86 Artware, 912 Decoration NOrpOr 450-500 Polymar PCM 402 & PCM 404,PMI 90 748-3645 Silmar S793C

250 252 263 242 244 245 247 248 248 249

Osmotic Blister Repair

Hawkeye Industries

Duratec Vinyl Ester Primer

297

Paper Impregnation Resin

Alusuisse ltalia Lorna SPA

Distitron 452 Distifron 451

339 315

6001,6070 6830,6874, 7724 GP 413D40 Resi-set 7724 6070 6830 DuMe SL-387A J2018L, J2033L P963lP964. J2027L Norsophen 1x15 J2027L PA13ZPX13 Norsophen 1205 GP 5018lGP4839 Reskset, GP50WGP4822 Reskset Durife Fire PRF, Durite Fire PRF, Norsophen 1205 GP 413D97 Resi-set (Various) RS-10 J2018L, J2042L P9631P964, PA-I WPX-13 Durife SC-822B Durife SL-5756 Norsophen 1205T GP 5018lGP4839 Resi-set, GFSOWGP4822 Reskset Durife LV-3020 Durife SC-409B Durite SC-83OA, SL-486A F-502, F-532 CPD 1382 1427

146 147 147 147 146 147 330 145 146 145 330

PVA type Saturated polyester type Thermoplastic

Thermoset + Thermoplastic Vinyl ester type Unclassified

Mortar (Grouting) Materials

-

Onyx Resins For Orthophthalic polyester Unclassified type

DSMoBASF Jotun Polymer DSMoBASF Ashland Chemical BIP Ltd DSMoBASF Jotun Polymer SIR lndustriale Swancor Industrial Vianova Resins Ashland Chemical

-

Phenolic Laminating & Other Resin Systems Aerospace Fiberite Aramid reinforcement Autoclave Chemical resistant Coldhrm-press Continuous laminatiion Filament winding

Fire & Smoke Exhaust Duct use 'General purpose'

Hand-lay, spray deposition

Impregnatingvarnish MIL-R-9299 approvals

Pigment dispersions continued:

Georgia-Pacific Fiberite Borden Inc Blagden Cellobond Borden Chemical Blagden Cellobond Cray Valley Blagden Cellobond Borden Chemical Cray Valley Georgia-Pacific Borden Inc Cray Valley Georgia-Pacific Hepworth Minerals YLA Inc Blagden Cellobond Borden Chemical Borden Inc Cray Valley Georgia-Pacific Borden Inc Fibercote Blagden Cellobond

-

145 146 330 147 330 330 330 147 147 331 146 146 329 330 330 147 329 329 330 146 145

51

Databook -

-

Phenolic Laminating & Other Resin Systems - continued: Prepreg, manufacture Borden Chemical Borden Inc

SCI 008P Durite SC-4098 Durite SC-954A, SL-486A F-502, F-532 GP 413D40 Resi-set J2018L, J2027L, J2042L Durite SC-8228 Durite SL-575B, Durite Resorciphen 2074-N2026-B Norsophen 1203,1209 GP 442D35 Red-set , GP 5018lGP4839 Resi-set J2027L J2027L, J2033L PA-104PX-13, PA13ZPX13 Durite SC-822B Durite SL-575B Norsophen 1205,1209 GP 501WGP4839 Resi-set, GFSOWGP4822 Rea-set 6830,6874,7724 J2027L Durite SC-822B Durite SL-5758 J2042L 6001,6070 6830,6874,7724 GP413D40 Resi-set 6070 6830

146 329 330 146 147 146 329 330 330 147 146 146 146 329 330 330 147 147 146 329 330 146 146 147 147 146 147

YLA Inc

RS-3, RS3BH, RS9C, RS-3M, RS-9, RS-9C, RS-12 RS-128. RS-l2C, RS-12D

329 329

IST (MA) Corp

Skybond 700,703,705,1888

333

AlphdOwens lnterplastic Corp

80-7OPCX Silmar SIL 07BA-I06111069 Silmar SIL 07DA-896E Palatal K765V Silrnar SIL 07BA-8896BlC , SIL 07BA-1053 Norpol 415-MI 00,415-M518 81-1881 Distitmn 458 V4,3559 SV3 Norpol 41Qooo et al, 415ooo et al G103E, S280E, S380 Polylite 32480-00 Resipol -EL, 9041,9050 Crystic 471PALV HPR C121, HPR C124D, HPR CHlO Sirester FS 0836/ARE, FS 0898, FS 1236, FS 9900 Norpol 320-000,32O-108.320508 Beetle 8137 Viapal H452

239 243 243 242 243 246 240 247 246 248 260 261 261 252 252 246 239 263

Ultracore I O , 20, 30 Ultrathane 5410,5440 Baydur645,66OIBS, 7301BS, 7261BS, Baydur GS Bayflex MP, 110 et al, 180 et at, XGT-16 et al Prism Baydur SFR 243 Baytec RTM Baytec RTM 532 Baydur STR Ultrathane 5315, 5360, 5426, 5460,5465, 5450 EL-221C Ureol 5211 - 5219

150 I50 148 149 149 148 149 161 149 150

P-650M Resipol 9902

178 298

Fibercote Georgia-Pacific Blagden Cellobond Borden Inc

Pultrusion

Resin infusion RIM, Vacuum Injection

Cray Valley Georgia Pacific Blagden Cellobond Borden Chemical Borden Inc

Sandwich panels Syntatic foam Thermal cure

Cray Valley Georgia-Pacific Fiberite Blagden Cellobond Borden Inc Blagden Cellobond Fiberite Georgia-Pacific Fiberite

Vacuum bag Polycyanate Resins Polyirnide Resins

-

Polymer Concrete Resins For DCPD polyester Flexible Isophthalic LSE Orthophthalic

OrtholNPG Unclassified polyester Polyurethane Polyesterlpolyurethanehybrid Polyurethanelpolyureahybrid RIM application

- fire retardant RRlM application RTM application SRlM application Structural resins Unclassified Wide-range, application

DSMmBASF Interplastic Corp Jotun Polymer Blagden Lonza SPA Jotun Polymer Neste Reichhold Chemicals Resisa Scott Bader Sirca SPA SIR lndustriale Jotun Polymer BIP Ltd Vianova Resins Futura Bayer Bayer Miles Inc Bayer Futura Robnor Ciba Specialty

Prepreg Manufacture (See also under other resin systems.) Dialylphthalate Fibercote Electrical application Resisa Epoxy resin See under Epoxy

52

-

161 160

-

Comprehensive Index: Resins For Adhesive Manufacture lsophthalic alkyd Phenolic Polyester Flame retardant

-

Primers Concrete lining (prior to laminate) Epoxy type Isophthalic, seal coat For RTM moulding Gelcoat primer - conductive - low voc orthophthalic type Osmotic blister repair Surfacing1sanding

-

lnterplastic Corp See under Phenolic Fibercote Fiberite Swancor Industrial SP Systems lnterplastic Corp. Ferro Corporation Lilly Industries Hawk International

Swancor CP-95 SP Eposeal 300,SP Hibuild 302 Silmar SlL75BA-602, SIL75BB-602A Ultra 7 SP Sandable lmpact RTM 5788E90009 Durabuild Vinyl Ester Primer 005

308 308 88 307 88 & 308 307

Lilly Industries

578469001 5784E90019 Norpol GP Duratec Vinyl Ester Primer Duratec Surfacing Primer 707402 Duratec Sanding Primer 707407 Durabuild Base Primer Durabuild Surface Primer Durabuild Vinyl Ester Primer 005 Swancor CP-95 Swancor SW-984M

308 308 308 297 98 & 307 307 307 307 307 308 309

Jotun Polymer Hawkeye Industries

Hawk International Swancor Industrial

Print Barriers

P-650R

178 178 178

P-600, P-603. P-C, P-6701 9002/9012

Hawk International Vinyl ester

298

Silmar SIL 76DA-949

-

Gwil Industries Polydyne Inc

W-2201102, W2207l08, W-2241142, W-2251152 125-0022 Dyna-Shield

318 318

Ferro Holland Hawk International Ferro (Holland) Adtech Cook Composites Diab Group Lilly Industries Llewellyn Ryland Scott Bader Llewellyn Ryland Diab Group Resin Services Ferro Holland Llewellyn Ryland Scott Bader

T4311, T4744 Durabuild Rapid HHR TOO10 No. 31, NO. 32, No 38, No 39. Polycor 970 Series Divilette 650HV, K-Lite, Pro-bond 4896,7400 HVD 02, HVD 06, HVD 08, HVD 09 Crystic 77PA, 78PA, 79PA HVD 08 Diviette 600 ECA-Paste, EPR-SM, Resin Shape T4317, T4980 HVD04, HVDO5, HVD 07 Crystic 77PA, 78PA, 79PA

259 259 259 257 258 334 260 260 261 260 334 26 1 259 260 261

Ferro Holland Resin Services Alusuisse ltalia Ferro Holland Resin Services Polydyne Hawk International Hawkeye Industries Hawk International Resin Services Ferro Holland

T0024, T0034, T0053, T4744 ECA-Paste Distitron 811W 2 0 T0032, T4744 RSC901XB 125-0009 Duratec Rapid HHR Duratec Hi-Gloss Duratec Hi-Gloss, Rapid HHR ECA-Paste, Patch Aid White, Patch Aid Grey TOO27 T4003. T4010

DSMoBASF Alusuisse ltalia DSM-BASF

Palatal K775V, K T n V Distitron 1408 Palatal K761V Palatal A41OU Palatal A41OlNlU Nopol 250-000 Palatal E200 Beetle 8937 Palatal E240, E250 Viapal H220B Palatal K750V

-

Putty and Paste Automotive and truck Base putty Boat use Bonding, polyester based

Chemical resistant Core bedding Epoxy based Gap and edge filling Gelcoat backing paste General purpose Honeycomb bonding Marble repair Marine grade Patching paste epoxy PVC bedding Temperature resistant Tooling

-

Translucent White

259 261 336 259 261 261 259 98 & 259 259 261 259 269

-

Resins For Adhesive Manufacture Bisphenol-A/vinylester type lsophthalic type automotive application LSE polyester NPGlisophthalic type

-

Novolak/adipic acid Orthophthalic type

- automotiveapplication

Jotun Polymer DSMoBASF BIP Ltd DSM-BASF Vianova Resins DSMoBASF

268 336 267 267 267 268 267 267 267 268 267

continued:

53

Databook -

-

Resins For Adhesive Manufacture - continued; PVC suitability Jotun Polymer Resisa Tetraphthalic type - automotive application DSMmBASF Unclassified

Norpol 250400 Resipol9995

187 268

Palatal K770V Synolite 64944-1

268 268

-

Resins For Button Manufacture Adipic acid type Isophthalic type Orthophthalic type

- semi-rigid - UV stabilised Unclassified type

Ashland Chem. Hispania FS8-6042 Jotun Polymer N O ~ O 381-281 l Alusuisse ltalia Distitron 416, 466 Ashland Chem. Hispania FSB-6041, FSB-6044 FSB-6046, FSB-6050 Cray Valley Synolac 6336.004 DSMmBASF Palatal K700/N, K710 et al, Synolite 0703-N-1 Lonza SPA Distitron 316T, 416 BlV16,416 LlTlOO Neste S 253 Resisa Resipol 9235,9242,9243 Singapore Highpolymer 287FN SIR lndustriale Sirester FSB 0803/F, FSB 0834/81 , FSB 0834/F Sirester FSB 0834/FT, FSB 0879/FT Sirca SPA HPR BlOITF, HPR B145TF HPR B166TF, HPR 8170 Vianova Resins Viapal VUP 4587T, VUP 4599 Viapal4654E Resisa Resipol 9244,9245 Jotun Polymer Norpol 342-057 Jiangyin Crabec Fuli 888M Fuli 888S.888TS

309 311 338 309 310 310 310 311 311 312 312 313 313 312 313 313 314 312 311 310 311

-

Resins For Casting, Encapsulation & Decorative Ware Bismaleimide Cytec Engineered Electrical potting Blagden Resin Services Vosschemie D-32000 Code PHT approval Resin Services Cytec Engineered Epoxy type Resin Services

Flame retardant HET-acidbased Insert manufacture Isophthah type - UV stabilised Iso/NPG type Orthophthalic type

Robnor Resins Tool Chemical Co Neste Cytec Engineered Jotun Polymer Marubeni Specialty BIP Ltd Huntsman Chemical Lonza SpA Jotun Polymer

- UV stabilised OrtholNPG - rigid Phenolic based Resilient resin grade Rotational moulding application Transparent quality (Water white)

Neste Reichhold Chemicals Resisa Singapore Highpolymer Vianova Resins Vosschemie Resisa Vosschemie Interplastic Corp Cytec Engineered lnterplastic Copr Alusuisse ltalia lnterplastic Corp Lonza SpA Jotun Polymer

54

BR 450-4 84-41 26 RS-Cast 50 Viscovoss KF RS-Cast 509 BR623 8 623P, 624,626, Cor# 615 Clear Cast Clear Cast 50150, RS-Cast 50, RS-Cast 509 PX672C 412,607,626,658 F-892 F-892 BR624 Norpol 381-000 Norpol 381-040 Polymar PMI90 Beetle 8930 Estarez 495P, 571P. 905P, 906P, 311OP Estarez 3112P, 3130PA, 3495P Distitron 3501C Norpol 340-000,340-500 N O ~ l 3 4 l - O o 0 ,341-020,342-M)o,342-510 Norpol450-000,450-600 G I 02 Polylite 32030-10, 32032-00 Resipol 9022IBV 311 Series Viapal F140 Viscovoss KF Resipol 9944 Viscovoss GTS Silmar SIL 95DA-979 BR662 Silmar 95BA-858 Silmar 95BA-858,96BA-962 Distitron 5026A Silmar SIL 95BA-40,95BA-41~95DA-41U Silmar 95BA-426, 95BA-68L2 Distitron 3501C Norpol 34M300,340-500 Norpol341-000, 341-020

335 269 273 274 273 336 272 273 273 273 272 272 336 271 188 & 271 248 & 271 269 269 269 271 270 271 271 272 272 273 273 274 274 273 274 270 335 270 270 335 270 270 271 270 27 I

- Comprehensive Index: Resins - For Moulding Compound Manufacture

Unclassified

- rigid

-

PP Composites Reichhold Chemicals Resisa Vianova Resins Vosschemie Adtech Corp PP Composites Resinous Chemicals Resisa Interplastic Corp

semi-rigid Welding helmet lens manufacture

-

Resins For Gelcoat Manufacture Corrugated sheet suitable lsophthalic type

Resisa Ashland Chem. Hispania BIP Ltd Resisa UV stabilised DSMoBASF Sirca SPA Iso/NPG type Ashland Chem. Hispania BIP Ltd Interplastic Corp Resisa rigid Interplastic Corp Marine approved (e.g Lloyds Reg.) BIP Ltd Resisa

-

-

Orthophthalictype

-

UV stabilised OrtMNPG UV stabilised Osmosis resistant Unclassified type UV curing

S40 Polylite 32030-1 0,3203240 Resipol 9944 Viapal H210BS Viscovoss GTS No. 40 Silmar S40,S41 Wresipol 31325 Resipol 9991 Silmar SIL 95DA-4A S h a r SIL %BAS97,95BB-969, %BE-981 SUmar SIL %BA-68L2,95DA-979

272 272 273 274 274 269 272 272 273 270 270 270

Resipol 9228 18-4341, ISG-0818 Beetle 8297 Resipol9548,%78 Palatal A400TL HPR G301 ls-4941 5eeUe 8200 S;Jmar 12DA-740G Resipor 9691,9697 Sflmar 12DA-772

276 274 276 276 276 276 274 276 276 276 276 276 276 276 274 275 276 276 276 276 277 276 276 277 278

5eeUe 8297

Resipol 9048 Resipol9578,9691 Ashland Chem. Hispania FS-611 Resisa Resipor9048 Resipol9049 Sirca SPA HPR CH70 HPR G107 Interplastic Corp Smar SIL 12DA-739 Sirca SPA HPR G901 Resisa Resip019697 Huntsman Chemical Silmar 996 Sirca SPA HPR G902 Res& Re&@ 9228

-

Resins For Laminating Sheet Glass Orthophthalictype Jotun Polymer Polyurethanetype Unclassified type

Ashland Chemical Ciba Specialty

Notpol 47&0001610 Norpol479-000l610 Glasgnp

2020

306 307 306 306

-

Resins For Moulding Compound Manufacture Bisphenol-A type DSMaBASF SIR lndustriale Flame retardant Lonza SPA Jotun Polymer Halogenatedtype Lonza SPA lsophthalic type Alusuisse ltalia BIP Ltd DSMoBASF Lonza SPA lnterplastic Corp

- flexible type - impact resistant

- low shrinkage - rigid type IsdNPG Maleic acid type

- low shrinkage continued:

Jotun Polymer Naptha Resins Neste Interplastic Corp Cray Valley Jotun Polymer Resisa Jotun Polymer Interplastic Corp Alusuisse ltalia Lonza SPA Lonza SPA Resisa

AUac XP810 Sirester BSM0844 Distitmn H422,H482 Norpol 680-000etal Dislitron H422, H482 Distitmn 35852 Beetle 8608 Synolite 6024N-1,6034-N-l Dislitmn 183 Silrnar SIL 42DAB16P, SIL 42DA-888 Sflmar SIL 42DA-944SIL 42DA-1014, SIL 47DA-864 Norpol 690-000 P w e x GR200-29 S599 Sflmar SIL 17DA857 Norsodyne M71101

Norpol 65Mwo/o6o Resipol 9274 Norpol 650-000 Notpol 680-000 Sflmar SIL 42DA-946 DstXmn 3584 DistXmn 272 DisWmn 423 ReU@ 9284

336 280 289 288 289

336 284 337 288 286 286 288 289 289 286 286 287 290 287 288 286

336 289 289 290

55

Databook

-

-

-

Resins For Moulding Compound Manufacture continued: Maleic/orthoDhthalic Jotun Polymer Maleic/propylenic SIR lndustriale Marine use lnterplastic Corp Orthophthalic type BIP Ltd Blagden DSM-BASF Interplastic Corp Lonza SpA Neste Resisa Scott Bader SIR lndustriale Vianova Resins - low shrinkage BIP Ltd DSM-BASF Lonza SPA Neste Vianova Resins rigid Jotun Polymer Pentyl-glycoVmaleictype DSM-BASF automotive application lnterplastic Corp Petroleum resistant Jotun Polymer Phenolic type Georgia-Pacific Polyester/vinyl ester type Alphalowens Recycle content (containing) Ashland Chemical Sanitary ware use lnterplastic Corp Temperature resistant DSM-BASF Teraphthalic base Jotun Polymer Unclassified type Ashland Chemical Cray Valley Huntsman Chemical Jiangyin Crabec - low shrinkage Ashland Chemical

-

Vinyl ester type

BIP Ltd Cray Valley Ashland Chemical Swancor Industrial

Norpol 660-000 Sirester FSM 0817 Silmar SIL 42DA-944 Beetle 8128,8143 81-7100,81-2233 Synolite 0020-N-2,040-N-I 22734-1 Silmar SIL 40DA-542, SIL 47DB-94M, SIL 47DA-452B Distitron 414 CVIO, 454 s 8512 Resipol 9264 Crystic 198 Sirester FSM 0825/HW et al, FSM 0892 Viapal VUP 4516, VUP 4619, VUP 4681 Beetle 811,8115 Synolite 7223-N-1 Distitron270s s a i 8zv33 Viapal VUP 4715 Norpol 670-000 et al Synolite 0423-N-1 Silmar SIL 42DA-959 Norpol 640-700 GP 582D58 Resiset E-8000 Series Anpol D-1663 Silmar SIL 42DA-944 Damn 11-102 Norpol 640400l700 Envirez 8030 Norsodyne M00400, M05501 Aropol 7030, Crystic 03679 Fuli 913, 915. 198s Aropol 50411,50418, MR 13006 Phase Beta 50421 Beetle 812 Norsodyne M0070C, M04960, M4721 Arotech 2000,2002 Swancor SW-979

287 290 286 284 286 337 286 289 290 290 290 291 29 1 284 337 288 289 291 288 337 286 287 286 283 283 286 336 287 284 286 286 287 283 284 284 286 283 291

PG-290 SilmarSIL 10DZ-889, 1ODZ-941,10DA-l112,10DZ-l175 Norpol 375.000,376-000 Sirester FSG 0885 Wresipol 31391 Sirester FSG 583 HPR G805, HPR G820 Beetle 8797 HPR G810, HPR G815

277 277 278 278 278 278 278 277 278

-

Resins For Pigment Paste Manufacture Adipic acid type Ashland Chem. Hispania Alkyd type lnterplastic Corp Orthophthalic polyester Jotun Polymer SIR lndustriale Saturated polyester Resinous Chemicals SIR Industriale Sirca SPA Unclassified BIP Ltd Sirca SPA

-

Resins For Putty EL Filler Paste, & Allied Material Manufacture Epoxy SP Systems SP Handipack lsophthalic Alusuisse ltalia Distitron 811Kv20, 1408 Cray Valley Norsodyne 6395-502 Interplastic Corp Silmar SIL 07BA-896B/C, SIL 07DA-896E Naptha Resins Polytlex GR 200-51 - flexible Jotun Polymer Norpol 750-000 Orthophthalic base Norpol 670-000 Blagden 89-14OOBP BIP Ltd Beetle 8937 Cray Valley Norsodyne 6520,6524 lnterplastic Corp Silmar SIL 07BA-1053, SIL 07BA-1069 Resisa Resipol 9044 Resipol9074,9342 Sirca SPA HPR S440 Vianova Resins Viapal F1506, VUP 47068 automotive application Blagden 83-8940 - flexible Jotun Polymer Norpol 472-000/500 Sirca SpA HPR S490 - DCPD modified lnterplastic Corp Silmar SIL 07BA-1061 - riaid Jotun Polvmer Nom01 670-000 Petroleim resistant No&/ 620-520

-

56

282 336 279 280 281 28 1 28 1 279 279 279 280 281 282 282 282 279 281 282

280 281 28 1

- Comprehensive Index: Surface Finishes Saturated polyester Tetrahydrophthalicbase Unclassified type

- automotiveapplication

-

Resins For Unclassified Use Anchor bolt fixing Epoxy-Polyesterbonding agent Flooring application Gelcoat enhancer lsophthalic flexible Paper impregnation Prototyping material Roofing membranes

-

Silicone resin Speciality polymers Syntatic foam

-

cyanate ester Tooling inserts

309 281 280 280 280 281 280 282

Jiangyin Crabec Resinous Chemicals Huntsman Chemical Resisa

Sirester FSG 583 N O P I 620-520 Palatal E200 Synolite 64944-1 Fuli 831 Wresipol 31417 Aropol3145A Resiwl9304

Blagden Hawkeye Industries Vianova Resins Futura Coatings Hawkeye Industries

81-1638T Duratec Epoxy 50ndCote Viapal L700 Gelcoat enhancer Duratec Hi-Gloss

DSMoBASF Alusuisse-Lonza Bryte Tech Blagden Resisa Fibercote Industries Landec Corp Ciba Polymers

297 Synolite 8130-N-1 316 8 339 Distitron 4511452 296 BC-350, BC-400 296 84-1 3-24 298 Resipor 9975 297 S-860 338 (Various) 296 Araldite 2 5 W B 296 Epocasf 927,1610.161 4ATF, 1817NB 296 Epocast 1637NB, 1638NB, 1681A/B,87005AIB-80 296 5lyteCor EX-I 541 297 Eposerts

SIR lndustriale Jotun Polymer DSMoBASF

Bryte Tech Ciba Polymers

240 8 296 297 299 207 297

-

Sanitary Ware Resins For (including. baths, showers, tubs and vanities) AIphdOwens ‘General purpose’ Cray Valley DCPD polyester

Vianova Resins Reichhold Chemicals lnterplastic Corp PP Composites

A573 Series, A679LA Series Endyne 8799,8802 Norsodyne 6343.1 03 Polymar PMI 90 Silmar SIL 93BE-9% et al Polylite 32169-00, 32169-10 Norsdyne 6343.218LP Norsodyne 6350 Norpd 447-000,447-555 Polylite 32109-10,32124-05, 32124-12 Polylite 3213240,321 35-00 PolyMe Procast 321-2,321 44-07 PolyMe Procast 32144-25,32144-30 Viapal H270BIBE, VUP 4626BE Polylife 32166-15, 32166-20 Silmar SIL 90BA-627 et a1 Silmar S793C, S849

239 241~ 241 248 244 260 241 241 246 249 249 260 260 263 260 244 249

SIR Industriale Sirca SPA

Sirester FSG 583 HPR G805, HPR G820

309 309

Silicone Resin

Fibercote Industries

S-860

297

Smoothing Coats For phenolic composites

Blagden Cellobond

J26/053L to /061 L Cellobond Acrylic Norsophen MC315,400& 401 GP 5020 GM

IsdNPG - acrylic modified UV stabilised LSE polyester Orthophthalic polyester

-

- UV stabilised Unclassified Saturated Polyesters For pigment pastes

Gelcoat for phenolic Surface Finishes Barnacle prevention Bonding coat, polyester-epoxy Enamels Epoxy, for nickel mandrels High Gloss

Post-moulding Sealers

Marubeni Specialty Interplastic Corp Reichhold Chemicals Cray Valley Cray Valley Jotun Polymer Reichhold Chemicals

Cfay Valley Georgia-Pacific Ferro Holland Ferro Holland Hawk International Cook Composites Resin Services Hawkeye Industries Interplastic Corp Vosschemie GmbH Futura Coatings Hawk International

Copperclad 70PA Durabuild EBC Polycor PB-53 HSC-302X Durafec Hi-Gloss Tint Base Silmar SIL 12DA-833J Polyester Glossfinish Ukrachrome 650 8,654 Durabuild W A , Durabuild Crystal Clear

97 97

326 97 96 318 319 87 89 87 & 319 319 319 91 87 319

57

Databook Syntatic Foam (See also under resin type etc.)

Bttye Technologies

(Various)

292,296 & 337

-

Synthetic Concrete see Polymer Concrete Tacking Film Epoxy Thickening & Thixotropic Agents

Bryte Technologies

Tackh Roll

Ashland Chemical Vianova Resins

Aropol Mod M, 59036 Viapal VUP 4660E

318 318

Adtech Borden Chemical Fibercote Industries Resin Services Tool Chemical See, Gelcoats - Tooling AlphdOwens Cook Composites Gwil Industries Interplastic Corp Resin Services Jotun Polymer Vianova Resins Hawkeye Industries

EL-JOl/LP, EL-302 et al, EL-328/-1, EL-336 Epophen EL-5/EHTB8 E-772 DT-2000-A, HHTD-A, HTL-250, HTL-509, HTL-6040 HTP-515, HTR-350, LR-100, LR-105, LR-200 LR-300, Tool Lite 205,30II306,306LS,307,625, 626, 630, 634,635

292 292 293 294 294 296 296

8-3P StVpOl 040-2989 w-2211/ I 2 Silrnar SIL 74AA-821IS , SIL 75AA-61O/S LR-200 Nopol 410-900 Viapal H265/E Duratec Hi-gloss Putty

292 293 293 293 294 293 296

Bryte Tech Huntsman Chemical Reichhold Chemicals

BC-350, BC-400 Arotool2OOOP, 2001P Polylite 33540-00

292 293 294

Resin Services

HSC-302X, HSC-509, HSC-902, HSC-905 HTR-212, R S C a l X , RSC-301XB 352,353,414,603, 605 Crystic 75PA Fireguard w-1936 TD15, TD16 Norpol NTA Distitmn 152 Viapal 960B & 960BE Viscovoss LT37B Norpol MT Silrnar SIL65BQ-249, SIL65BQ-250, SIL65BQ-250A Resipd 9191 Crystic 47PA Viapal L700 Viscovoss LT35SB, Viscovoss LTllOSB Polylte 32737 Hetrolac 105

76

-

Tooling Laminate Resins Epoxy resin type

Gelcoats lsophthalic type

LH-103102S approval Orthophthalic type Putty (see Putty & Pastes, above) Syntatic structure Unclassified polyester Topcoats EPW

Tool Chemical Scott Bader Gwil Industries Llewellyn Ryland Iso/NPG Jotun Polymer Lonza SPA Vianova Vosschemie GmbH Jotun Polvmer Iso/Ortho Ortho. polyester, general purpose lnterplastic Corp. Resisa Scott Bader Vianova Vosschemie Unclassified Reichhold Chemical UV Absorber Ashland Chemical Intumescent lsophthalic

-

Unsaturated Polyester Laminating Resins Acrylic bathkhower reinforcement BIP Ltd Cray Valley Gwil Industries Huntsman Chemical Jotun Polymer Lonza SPA Marubeni Specialty McWhorter Tech. Reichhold Chemical Resinous Chemicals Arcylic modified, iso/NPG ArchitecturaVdecorativeappl. Casting

58

lnterplastic Corp Alpha/Owens Ashland Chemical Alphalowens

Beetle 8171,8176,8204 Endyne 8801 Norsodyne 6380.002,6380.245,6386.004 Norsodyne 6386.250 WX-228384, WX-2285186 fstarez 1030 PALSE, 3121 PA Nopol 41O-M710,41 O-M717 NOW 440-M705 Distitron 461ST Polyrnar PLT 233234. PMG 433434 714 1636,7145222 Polylite 33111-05 P~&lite33131-00, 33341-00 Wresipol 31419,31423,31445 Wresipoi 31460 Silrnar SIL 75AE-1045 5859P, 80D-963 Hetron 92FR E-737

89 89 90 90 87 89 88 89 90 91 88 88 90 90 90 90 87 164 169 171 172 180 182 188 191 201 202 203 210 211 212 213 184 162 166 163

- Comprehensive Index: Unsaturated Polyester - Laminating Resins Centrifugal casting fabrication

Alusuisse ltalia Jotun Polymer

Lonza SPA Neste Resinous Chemicals Singapore Highpolymer Vianova Chlorendic type Class ‘ A surface Cold/warm-press moulding

Naptha Resins Saudi Industrial Reichhold Chemical AlphdOwens BIP Ltd Cray Valley DSM*BASF Jotun Polymer

Lonza SPA Neste

Compression moulded

Reichhold Chemicals Resinous Chemicals Resisa BIP Ltd

Lonza SPA SIR Constructiontbuildingappl. Containing recycled material Container panel application Continuous lamination, sheeting Adipic acid type - ’General purpose’

-

continued:

Vianova Reichhold Chemical Ashland Chemical Lonza SPA Sirca SPA Resisa Alusuisse ltalia

Distitron Z234V42 Norpol 250-000 NOrpOl480-020, 480-500,480-M610 Norpol 720-010102010801I1511500 Distitron 449 NT9 K53OrTE S703 Wresipol SUP 302 261HR Viapal H445 VUP 4570 Polyflex GR200-52 (No information provided) Polylite 31520-01,31520-04 E-737 Beetle 859 Norsodyne 6344.040 Norsodyne 6394.211 Synolite 0685.N-1 Norpol 360-060,360-070 Norpol 413-103 Norpol 420-070 Norpol 720-010, 730-500,800-200 Norpol 844-0301M730,850-200 Distitron 330125 Distitron 454 A 300E G I03E S599rTE Dion 8101-00 wrqsipol UP092 Resipol 9078,9990 Beetle 810, 811 Beetle 8128 Norpol 8143,8608 Distitmn 183CS Sirester ES 0906IA FS 0830 et al Viapal VUP 4644 Polylite 3340400, 3348o-00 Envirez 6215,8030 Distitron Z231 LS HPR AI02 M3SIMWIMA

Resipol 9937 Distitmn 201 Disfitmn 1116CLV2 Ashland Chem. Hispania FS-3940, FS-3943, FS-3963 Blagden 82-4340 Cray Valley Norsodyne 6347.007 Norsodyne 6367.007, 6367.008 Huntsman Chemical Aropol 4030 Estarez 930P, 4021P, 4026PSP, 4035P, 4075 lnterplastic Corp Silmar 996 Norpol 291-0oO Jotun Polymer NO~l381-040,410-510 NOrpOll3-220 Norpol 420-110,420-130 Norpol 720-010 N0pl844-030IM730, 845-1 10,850-2001864iT~l864 Lonza SPA Distitmn 201AZ Distitmn 5142 Naptha Resins PolytYex GR 200-12 F 892, G I 03E Neste G I 93L, G I 94L, G200LE, K530rTE Norpol Polymer Dynopol 2421 Resipol 9051 Resisa Resipol9212, 9437 Resipol 9932,9935 Scott Bader Crystic 3851385PA Singapore Highpolymer 2671L 8, S Sirca SPA HPR LIOBFC

331 187 192 196 201 207 208 213 224 232 233 206 332 210 153 162 170 172 176 187 189 190 196 198 200 20 1 205 206 208 209 213 215 161 163 164 199 227 228 234 211 155 200 226 220 331 332 159 166 170 171 181 182 185 187 188 189 190 196 198 200 20 I 204 206 207 208 215 218 220 222 224 226

59

Databook -

-

Unsaturated Polyester Laminating Resins - continued: SIR Vianova

- Flame retardant

Blagden Huntsman Chemical Jotun Polymer Lonza SPA SIR DBNPG resin BIP Ltd Scott Bader DBNPGIHET resin Jotun Polymer DCPD modified (type unknown) AlphdOwens DSMmBASF Gwil Industries ReichholdChemical Reduced VOC Alphalowens Dielectric laminate use SIR

-

DTD approved

Scott Bader

Filament winding fabrication

Alpha Owens Alusuisse ltalia Ashland Chemical Blagden Hunstman Chemical lnterplastic Corp Jiangyin Crabec Jotun Polymer

Lonza SPA Naptha Resins Neste Norpol Polymer ReichholdChemicals Resinous Chemicals Resisa

Scott Bader Singapore Highpolymer Sirca SPA SIR

- Flame retardant

Vianova Resins Ashland Chemical

- Halogenated BIP Ltd Flame retardant (No fire performance classification attempted) Ashland Chemical

Blagden BIP Ltd Cray Valley

60

Sirester FS 0918 SiresterFS 1210, FS 1214/C, FS 4131, FS421ZE Viapal H240S Viapal VUP 4640ES 81-13-93 Estarez 4065P Norpol 820-030,820-600 Distittvn H484 Sirester ES 0880, ES 0925IM2lR Beetle 8193 Crystic 388 N O W 1 845-110 80-78OX, 80-782X. 8OD-963 Synolite 0175-N-1 W-2257158, W-2269, W-2285, W-2287 Polylite 31-502 80-61OOVX Sirester FSL 0870 ISL 0963 CfptiC 196 625MV & TV E-I 20, E-701, E-704 et al, E-709, E-737 Distitron Z230 Hetron 99P 82-1464 84-5077 Crystic 272 Silmar SIL 26DA-925B Fuli 886 Ortho, 887 I s 0 Norpol 200-020 Nopol 2o0580 Norpol 480-020,480-500, m M 6 1 0 Norpol 72O-02OI0801I151I500 Disfitmn 1629EL5 Polyflex GR 200-20 G103E K530iTE S599iTE Dynopol2625 Atlac 400-15 Polylite 33480-00 Wresipol 3141 1 Wresipol UP 092 Resip01 9176 Resipol9427,9544 Resip019699 Resipol9995 ctystic 196 Crystic 272 261HR HPR A102 Sirester FSW 0935, IS 0460, IS 0841 Sirester ISW 100 Sirester ISW 200, ISW 0936, ISW 0946 Viapal VUP 4649EIEmv Hetron 604T-20 Hetron FR620T-20, FR640T-20 Hetron 92FR Hetron 197AT-P Hetron 197-P et al, 692TP-25 Beetle 8135

228 229 232 234 166 182 197 202 227 164 222 198 162 176 180 210 162 230 231 220 222 153 331 155 166 166 181 183 186 186 187 192 196 201 204 206 207 208 208 209 211 212 213 217 218 219 220 220 221 224 225 230 231 232 234 166 167 166 166 166 163

Hetron 197AT-P Hetron 92FR, 99P Hetron 197P et al, 604T-20,625P, 692TP-25 Hetron FR620T-20, FR640T-20 81-13-93 85-17-15, 85-7600 Beetle 870 Beetle 8877 Norsodyne 6356M, 63571D

166 166 166 167 166 167 162 165 170

- Comprehensive Index: Unsaturated Polyester - Laminating Resins Norsodyne 6417 Estarez 6012P Norpol 820 Series Norpol850 Series, 851 Series, 852 Series W h n H422 Lonza SPA Distitron H482 Polyflex GR 200-22-1, GR 200-22-3 Naptha Resins F 207TPE, F 240TF, F 804TF, F820, F892 Neste Don FR 7767-00 Reichhold Chemical Resipol 9740 Resisa Saudi Industrial (No information provided) Cystic 356PA, 357PA Scott Bader Cystic 1355PA Sirester ES 0856 et al, ES 0871/X SIR Sirester ES W A , ES 0925M2 ViapalN600, N612A/AE, N 6 1 3 , N614, N660/E Vianova Resins Beetle 8193 BIP Ltd Crystic 388 Scott Bader Cystic 244PA Huntsman Distitron H384, H422 Alusuisse ltalia Hetron 92FR, 99P Ashland Chemical Hetron 197AT-P, 197-P, 625P, 692TP-25 Jotun Polymer Norpol 800 Series Norpol 821-829 Norpol8WM750 L o r n SPA Distitron H422 Distitron H482. H484 Resisa Resip19770 Wanova Viapal VUP 4653ES Cray Valley Norsodyne 6357L Jotun Polymer Norpol 800-M350/M750 Resinous Chemicals Wresipol 31452,31455,31458, 31459,31466 Scott Bader Cystic 2-1355PA DSMoBASF SynoMe 6815-N-1 Jotun Polymer Norpol 820-600 Ashland Chemical Hetron FR 620T-20 Cook Composites Stypol 40-2806 DSMoBASF Synolite 3355-W-112, 4038-W Fibercote P-602 Jiangyin Crabec Fuli 918 McWhorler Tech. 7524423,752-4483 Reichhold Chemical Dion FR 770400 Pdylite 33441-00 BIP Ltd Beetle 8134 Neste 5703 SIR Sirester IS 0842 Biagden 82-15-125 Jotun Polymer Norpol 420-960/970 Resinous Chemicals Wresipol 31454 Vianova Resins Viapal VUP 4688BT Ashland Chem. Hispania FS130 IS-4041 Cook Composites Stypol 040-4280 Cray Valley Nowodyne 6395.21 1 lnterplastic C o p Silmar SIL 75BQ-839 et al Silmar SIL 75AQ-844 Naptha Resins Polyflex GR 200-25 PP Composites Silmar S249lA Sirca SPA HPR A102M35/M60/MA SIR Sirester FS 3130 Sirester IS 4240, IS 4245 Vianova Resins Viapal H W S , H W E BIP Ltd Beetle 870 Huntsman Chemical Hetron 197L, 197P, 197-3 Jotun Polymer Norpol 821-829 Norpol830-M750, 840 Series Neste F 804TF, F892 Resisa Resipol 9740 Vianova Resins Viapal N600, N614 Jotun Polymer Norpol 844-030/M730 Huntsman Chemical Jotun Polymer

,

- DBNPG based - Di-bromo1NPG

- Halogenated

- LSE

- Methyl methacrylate mod. - Unclassified resin type

'Flexible' resin Foaming

Foodstuff approved

HET-acid

- UV stabilised

172 183 197 198 & 199 201 202 205 206 210 220 332 221 223 227 227 233 164 222 181 332 165 166 196 197 198 201 202 220 234 171 196 213 223 177 197 157 168 177 178 186 203 210 211 163 208 230 314 314 314 233 167 160 167 172 185 184 206 209 226 229 231 233 162 183 197 198 206 220 233 198

continued:

61

Dafabook -

-

-

Unsaturated Polyester Laminating Resins continued: lsophthalic type DCPD modified Reichhold Chemical

- Flame retardant

Ashland Chemical BIP Ltd Cray Valley Huntsman Chemical Jotun Polymer Lonza SPA

- Flexible - ‘General purpose’

Naptha Resins SIR Alpha/Owens Cray Valley Huntsman Chemical SIR Alphalowens BIP Ltd Blagden Cook Composites Cray Valley DSMoBASF DSMoBASF Dulux Gwil Industries Huntsman Chemical Interplastic Corp Jiangyin Crabec Jotun Polymer Lonza SpA Marubeni Specialty McWhorter Tech. Naptha Resins Neste Norpol Polymer Reichhold Chemical Resinous Chemicals Scott Bader Singapore Highpolymer SIR

- HET acid modified

- High molecular weight - UV stabilised IsdNPG type

Sirca SPA Vianova Resins Vosschemie Scott Bader Alphalowens DSMoBASF HuntsmanChemical Interplastic Corp Naptha Resins Alphalowens DSMoBASF Jiangyin Crabec Jotun Polymer Naptha Resins Resisa

62

Polylite 33230-17,33233-05,33234-01, Polylite 33234-1 7,33247-00, 33266-00 Hetron 92FR, 99P Hetron 197AT-P, 197P et al, WT-20,625,692TP-25 Hetron FR620T-20, FR640T-20 Beetle 870 Norsodyne 6417 Estarez 6012P Norpol 820 Series Distitron H422 DistitronH482 Polyflex GR 200-22-1 Sirester ES 0906/A E-737 Norsodyne 6394 Aropol 7721 Sirester IS 0842 83P Beetle 8608 84-5072 84-5100 Stypol 040-4112,040-4280 SfypolO40-4331et al Norsodyne 6397.111 Palatal A400 et al Synolite 1717-N-1 Synolite 3720-1-1 (No information supplied) w-I903/04, w-190w06, w-1907108, w-1909110 W-l915/16, W-1921/22, W-l929/30 Cwstic 2515P. 3-491 P. 3-807P Siinar SIL 758A-605, SIL 75AA821et al, SIL 75BA-1131 Fuli937 Nopol 71OW1410 Norpol730-000 Distitron 187ST Distitron 351 BV10 Distitron 1629NT Polymar PMI 80 745-461 5 Polyflex GR 200-20 GR 200-22-1, GR 200-55 M530TE Dynopol2834 Dion 6631T Polylite 33402-00,33404-00 Wresipol 3141 1 Wresipol UP 302 WresipolVU P 9158 Crystic 199 Crystic 489/489PA, 491PA, 625MV & TV 3254 Series Sirester HP4, HP7 Sirester IS 08641P HPR N380TA Viapal VUP 4657 Viscovoss i 258. i251B Crystic 3851385PA E-704et al, E-709 Palatal A400L Aropol 2516P, 2517P, 7241P Silmar SIL 75BB-6058 Polflex GR200-22 81-6020 E-I20, E-701 Palatal A410 et al F ~ lC-2 i ISO-NPG Norpol 200400 Series Norpol250-000 et al, 250-810,291W et al Polyflex GR 200-18 Resipol 9696, 9698

211 211 156 156 157 162 172 183 197 201 202 205 227 153 172 181 230 152 164 166 167 167 168 172 173 176 177 177 179 179 182 184 186 196 196 199 200 201 202 203 204 205 207 209 209 211 212 213 214 221 222 224 230 23 1 226 234 234 222 153 173 181 184 204 152 153 173 185 186 187 204 219

- Comprehensive Index: Unsaturated Polyester - Laminating Resins

Linings (e.g. tanks and pipes)

Low profilelshrink

Scott Bader SIR Vianova Resins Vosschemie Huntsman Chemical Interplastic Corp Jotun Polymer Naptha Resins Resisa Singapore Highpolymer SIR AlphaIOwens Ashland Chemical BIP Ltd Cray Valley Jotun Polymer Lonza SPA

Crystic 397PA Sirester IS 0896lP Viapal H485/E, VUP W B T , BET Viscovoss W37B Aropol 7241T-I 5 Silmar SIL 75AA-6101S Norpol 480-410 Pdyfiex GR 200-25 Resip01 9696 261HR Sirester IS 0460 80-780X, 80-782X Aropol Q6585, Arotran (26038 Arotran Q6530,50422-10,50422-50 Beetle 811 Norsodyne 6501,6501.040 Norpol 360-000 et al, Nopol 650-050 Distitron 187ST

222 231 233 235 186 184 192 206 219 224 230 163 154 165 161 172 187 194 199

LSE (reduced VOC)

- Flame retardant

- Het acid

- lsophthalic

- IsoINPG - Orthophthalic

Huntsman Chemical Resinous Chemicals Scott Bader Jotun Polymer Huntsman Chemical Jdun Polymer Neste Jotun Polymer Alusuisse ltalia BIP Ltd

Cray Valley

DSMoBASF Gwil Industries Huntsman Chemical

lnterplastic Corp Jotun Polymer

Lonza SPA Neste Resisa Scott Bader

- Ortho, flame retardant - Tetrachlorphthalic - Unclassified continued:

Sirca SPA Cray Valley Jotun Polymer Ashland Chemical BIP Ltd Cook Composites

Crystic 6420 PALSE 182 Wresipol 31452,31455,31466 213 C ~ ~ t2-1 i c355PA 223 Norpol 820-M723 197 Ampol 2015PALSE 181 Norpol 850-M250/M750/M850, 850-M864 198 EL 199 M530TE 207 NOW1 200-M300, %M700, 200-M800,200-M880 186 Ds&tron 5119ESXZI 332 Beetle 807X 161 Beetle 836X 162 814375E, 81-4377E 166 82-4300,82-4343E, 82-4363W, 82-4560 166 Endyne 20,22,30 168 Endyne 50.8801 169 Norsodyne EN13,20,30,31,50 169 Norsodyne 6343.218LP 170 Norsodyne 6370.002 171 Palatal P69U, U541TTTV, U542TV, U596TTTv 175 Synolite 3753-K 177 W-l805/06 179 Aropol 1066PLSE 181 Crystic 1025PALSE, 1027,1035 PALSE, 1036 PLSE 181 Crystic 1037 PLSE, 1038 PLSE, 1045 PSLSE 181 Cystic 1047 PLSE,1052 PALSE 182 Estarez 1030 PALSE, 1050 PALSE, 1060 PALSE 182 Silmar SIL 69AS-940D 184 Norpol 41O-M300,410-M700, 188 Norpol 410-M800/M8701M880/M910 188 NO~l420-M250/M350/M73750 189 & 190 Norpol 420-M850/M880/M920 189 & 190 NopI44@M250/M350/M380/M701 190 EL 191 Norpol 440-M750/M850/M8601M880 190 & 191 Norpol 440-M890M920/M950 190 EL 191 Norpol 480-M300/M6WlM750/M850,43O-M&ao 192 NOrpOr 540-M380lM700lM8WM860 192 EL 193 Norpol 540-M880/M920 192 EL 193 NOPOI820-M723, 197 Norpol 851-M200 199 Distitron 459SW 201 M I05 et al 207 Resipol 9179,9182,9184,9188,9190 217 CIystiC 2-406PA, 2-414PA, 2420PA, 2-8500PA 223 Filabond 2-8500PA 223 HPR A102, HPR E l 16TA 226 Norsodyne 6357L 171 Notpol 800-M350/M750 196 NOW1 810-M810 197 AM€ 5O00 Low VOC 154 Beetle 8171,8204 164 Stypol 40-48Series 168

63

Databook -

-

Unsaturated Polyester Laminating Resins - continued: Gwil Industries

W-I 803104 178 W-I 851/52, W-I 854, W-I 857/58 179 Jotun Polymer Norpol 720-720/M750lM850lM880 196 8 196 Lonza SPA Distitron2231LS 200 Resinous Chemicals Wresipol 31360,31398,31402 212 Wresipol31458,31459, UP 229 213 WresipolVUP 3300, VUP 9122, VUP 9260 214 Sirca SpA HPR A172TA 225 - UV stabilised Resisa Resipol 9176 217 Marine approved (Lloyd’s etc) BIP Ltd Beetle 807X 161 Beetle 836X 162 Beetle 865E, 8733 165 Blagden 81-4377E 166 82-4300,82-4343E, 82-4363W, 824560,845072 166 Cray Valley Norsodyne QC2 169 Norsodyne QC6,6345.213 170 Norsodyne 6397.111 172 Jotun Polymer Norpol200 Series 186 Norpol410 Series 188 Norpol420 Series 189 8 190 Norpol440 Series 180 8 191 Norpol480 Series 191 8 192 Norpol540 Series 192 8 193 Norpol720 Series I 9 6 J3196 Norpol810 Series, 820 Series 197 Norpol840 Series 198 Norpol850 Series, 851 Series 199 Naptha Resins Polyflex GR 200-14, GR 200-20 204 Polyflex GR 200-24 206 Norpol Polymer Dynopol 21032 209 Resinous Chemicals Wresipol UP220, UP 229 213 Wresipol VUP 9122, VUP 9260 214 Resisa Resipol 9024 et al 214 8 216 Resipol9044 et al 216 Resipd9122,9131,9138,9142 216 Resipol9144,9148 217 Resipol9548,9588 et al, 9638 219 Scott Bader Cystic 471PALV, 4891489PA 222 Cystic 2-406PA, 2-414PA, 2-420PA 223 Singapore Highpolymer 3254 Series 224 SIR Sirester FSN 08501AT et al 230 Sirester ISN 08411AT & AMT 231 Marine fabrication Alphalowens 80-61OOVX 162 153 F11-2334, F11-2520 (no specific approval quoted) Ashland Chemical 154 AM€ 5000 Low VOC 156 Hetron 604T-20 Ashland Chem. Hispania 18-4933 161 DSMoBASF 176 PalatalP69, U541T/TV, U542TV, U596TiTV 180 W-2229195, W-2249150 Gwil Industries 199 Lonza SPA Distitron 183CS 200 Distitron 441S 202 Marubeni Specialty Polymar PMG 432434 203 McWhorter Tech. 712-1946,732-1136,752423,7524483 209 Norpol Polymer Dynopol 2827 210 Reichhold Chemical Polylite 33053-10,33072-00, 3307400 211 Polylite 33131-00, 33230-17,33233-05 211 Polylite 33247-00,3326600 226 HPR N103 MATTTA, HPR N380 TA Sirca SPA 184 Silmar SIL 65DA-325 lnterplastic Corp MIL-R-575 approval MIL-R-2160D (Ships) approval 156 Hetron 692TP-25 Ashland Chemical McWhorter Tech. MIL-R-21607E approval 203 752-4483 166 Ashland Chemical Hetron 692TP-25 MIL-R-7575C approval 178 Fibercote P-602 203 McWhorter Tech. 745-4615,752-4423,752-4483 165 81-4377E National Water Council approved Blagden 214 Resinous Chemicals Wresipol VUP 9158 Orthophthalic type 204 Naptha Resins Polyflex GR 200-12 Acrylic modified 168 Cray Valley Endyne 20,22,30 DCPD modified 169 Endyne 50,8801 227 SIR Sirester EC 9120, EC 9250, EC 09471AT & AMT - Ecological designated 229 Sirester FS 0956lPMS

-

64

- Comprehensive Index: Unsaturated Polyester - Laminating Resins - Flame retardant

165 Beetle 8877 81-13-93 165 167 85-15-108, 85-17-15.857600 Norsodyne 6356M,635710 170 Cray Valley 196 & 197 Norpol 800 Series Jotun Polymer Po/ynex GR 200-22-3 205 Naptha Resins F 207TPE, F 240TF 206 Neste Crystic 323PA 221 Scott Bader Esfarez 3121 PA 182 Huntsman Chemical - Flexible 161 No. 19L Adtech - 'General purpose' 163 F11-2334, F11-2520 AlphalOwens 167 Ashland Chem. Hispania FS-IO, FS-610, FS-19OOet al FS-1913, FS-1923 168 FS-3923, FS-3930, FS-3933 I59 FS-6902, FS-6903, FS-6912, FS-6930 160 Beetle 807X, 810,811 161 BIP Ltd Beetle 865E 162 Beetle 8128 163 Beetle 8143,8333 I64 Beetle 8733 166 Stypor 040-4221,040-4232 167 Cook Composites Endyne 20,22,30 168 Cray Valley Endyne 50,Norsodyne EN13,20,30,31,50, QC2 169 Norsodyne QC6,6344.040,6345.213 170 174 OSM*BASF Palatal P4 et al, P5, P6, P50 et a1 175 PalatalP61 et al, P69, P80 Synolife 0618N-1,0719-L-l, 1900-N-1,2020-P-112 176 Synolite 3753-1-112, 3780-T-1,3785-L-lM 177 (No information provided) 179 Dulux 182 Huntsman Chemical Esfarez 1501 PA, 1518 PA Sjlmar SIL 65AA-30C et at, SIL 65AB-951 et al 183 Interplastic Corp Lonza SPA Distifron 441s 200 Distifron5119NX 201 Jotun Polymer Nopol 36O-OOO 187 Norpol413-OOO et al 188 & 189 Norpol420 Series 189 & 190 Norpol 440 Series 190 & I 9 1 Norpd 480 Seriis 191 & 192 Norpol540 Series 192 81193 Naptha Resins Polflex GR 200-05, GR 200-10 204 Pdyflex GR 200-1 4, GR 200-19 204 Neste AW E 205 G 102TA, G 300TPJT6, M I 05 et al 207 Norpol Polymer Dynopol 2112,2116F 208 Reichhold Chemical Polylife 3248040,33053-10,33072-00 210 Poly/ife 3307400,33087-00,33130-00 210 Polylife 33131-00,3315MH), 33166-10 211 Resisa Resipol 9024 et a1 214 Resipol9028,9044 et al, 9osB, 9074,9078 215 Resipol9104,9117,9122,9131,9132,9138,9141,9142 216 Resipd9144,9148,9154,9194 217 Resipol9638,9654,9655 219 Resip019990 220 Saudi Industrial (No information provided) 332 Scott Bader Cfystic 198 22 1 Crystic 471PALV 222 Singapore Highpolymer 268 Series 224 SIR Sirester FS 81, FS 0830 et at, FS 0910, FS 0956 228 Sirester FS 0956lAM, FS 1145, FS4230. FS 4424 229 Sirca SPA HPR Al02TA 225 HPR N103, HPR NlO3MAT 226 Vianova Resins Viapal H220, H225/E 232 ViapalVUP 4610, VUP 4627E et al 233 & 234 Viapal VUP 4642E 234 Vosschemie ViSCOVOsS Azur-Super, KF, N50S 234 - High temp. resistant Ashland Chem. Hispania FS-31 157 Blagden 81-4375E 165 82-4300,82-4343E 166 DSM*BASF Synolife OWLN-1 176 Methyl methacrylate modified Cray Valley Norsodyne 6367.008,6386.004 171 Norsodyne 6386.250 172 DSMeBASF Synorite 6815-N-1 177 continued: BIP Ltd Blagden

-

65

Databooh -

-

Unsaturated Polyester Laminating Resins - continued: Jotun Polymer

- UV stabilised

OrthdNPG type Orthofreraphthalictype PEThsophthalic resin Petroleum resistant

Pipe application

Pole manufacture Polyester polyol Potable water approved

Pultrusion fabrication

66

NOIpOl 330-120,330-610 Norpol 820-600 Ashland Chem. Hispania FS-3940 BIP Ltd Beetle 8135 Jotun Polymer NOtp~l330-120,330-610 Norpol 420-240 Lonza SPA Distitmn 201AZ Neste G193L, G194L, G200LE Norpol Polymer Dynopol 2421 Resisa Resipol 9932 SIR Sirester FS 1210 Naptha Resins Polyflex GR 200-17 DSM-BASF Palatal P58 McWhorter Tech. 762-5187 Ashland Chem. Hispania ISG-0818 DSMeBASF Palatal 420 Jotun Polymer NOIpOl 620-000,640-000 Resisa Resipol 9699 Vianova Resins Viapal H265lE Viapal VU P 4644 AlphdOwens 81-6020 E-737 Alusuisse ltalia Distitron 2/230,2/234V4Z Ashland Chemical Hetron 197P et a1 Cray Valley Norsodyne 6394.211,6395.21 I, 6398.210 Lonza SpA Distitron 191,412V2 Distitron 1629 EL5 McWhorter Tech. 752-4423 Resisa Resipol 9544 Resipol9548,9!388et al Saudi Industrial (No information provided) Vianova Resins Viapal H445 Viapal VUP 4570 Viapal VUP 4649WEmv Alusuisse ltalia Distitmn 5003L Lonza SPA Distitron 2 182\14 lnterplastic Corp Silmar SIL 76DA-953, SIL 76DA-1176, SIL 76DA-1177 AlphdOwens 83P. 80-610 0 W Blagden 81-4377E Naptha Resins Polyflex GR 200-25 Scott Bader Crystic 397PA Alphalowens E-737 Ashland Chemical Envirez 8030 BIP Ltd Beetle 810,811 Beetle 8128 Beetle 8608 Blagden 81-1854 Cray Valley Norsodyne 6370-040 DSMeBASF Palatal P51 Huntsman Chemical Crystic 272 lnterplastic Corp Silmar SIL 30DA-685M, SIL 30DA-964 S17marSIL 30DA-991, SIL 30DA-1151A Jiangyin Crabec Fuli PT2,881FR Jotun Polymer Norpol 200-000 Norpol 600-040 et al, 630-000 et at, 640-000et al Norpol 650-000et al, 670-000 et al, 68Mwx)et al Lonza SPA Dstitron 351BV10.414CVlO Naptha Resins Polflex GR 200-23 Neste S 380, S596RE, S599 et al Reichhold Chemicals Don 8101-00.31 020-33 Dion 31033 Resinous Chemicals Wresipol UP092 Resisa Resipol 9262,9264,9274/8\1,9284 Scott Bader Crystic 196 Crystic 272 Singapore Highpolymer 261HR SIR Sirester FS 0895lP Sirester IS 0864/P, IS 0896lP Sirca SPA HPR P138, HPR P18OLP, HPR P349 Vianova Resins Viapal H262S Viapal VUP 4644

187 197 169 163 187 189 200 207 208 220 229 204 174 203 161 173 193 219 232 234 162 163 331 166 172 200 201 203 218 219 332 232 233 234 332 200 298 162 166 206 222 163 165 161 163 164 166 171 174 181 183 183 186 186 193 194 200 206 208 209 210 213 218 220 221 224 228 231 226 232 234

- Comprehensive Index: Unsaturated Polyester - Laminating Resins PVC adhesion Roofing RTM fabrication

Resisa Scott Bader BIP Ltd Alusuisse ltalia Ashland Chemical BIP Ltd Blagden Cray Valley DSMeBASF Gwil Industries Jiangyin Crabec Jotun Polymer

Lonza SPA Naptha Resins Neste Reichhold Chemical Resinous Chemicals Resin Services Resisa

Scott Bader SIR Sirca SPA Vianova Resins

- Flame retardant Sanitary ware Sign production Solid surface application Surfboard manufacture

Swimming pool repair Tank 8 silo application

continued:

BIP Ltd Jotun Polymer SIR Vianova Resins Lonza SPA Resisa Interplastic Corp Saudi Industrial lnterplastic Corp PP Composites Reichhold Chemical Interplastic Corp Alusuisse ltalia BIP Ltd Cray Valley DSMeBASF Lonza SPA Marubeni Specialty Norpol Polymer Saudi Industrial

Resipol 9995 220 Cfystic 397PA 222 BeeUe 8135 163 Beetle 8143 164 Distitron ZLS, ZRTM 332 Aropol 7030A 154 AropolQ6530, Arotran 50422-10150, Envirez 8030 155 Hetron 197RT 166 Beetle 859 162 Beetle 8333 164 82-14-1 04 166 Norsodyne 6344.040 170 Norsodyne 6501,6501.040,6502,6502.204 173 Palatal P51 174 Synolite 0685-N-1,1105N-1 176 W - I 801 178 W-2223 179 FUli RTM-1, RTM -2 185 No@ 200-010 186 Notpol 410-500 188 Norpol420-100,420-51 0 190 Notpol 460-510 191 Notpol631-000/510 193 Notpol670-706/710 194 Norpol720-010,730-000/500 196 Norpol800-610 197 Notpol 844430lM730 198 Distihn 330/25 200 Polflex GR 200-55 206 A 300E 205 F820, G105E 206 G200LE, K530KE 207 Don 6246 209 Polylite 31501-06,31501-10,31-502,31520-01,31520-04210 wresipd SUP 302 213 Wresipol VUP 3300 214 HTP-144, HTP-402, HTP-402-99 214 Resipol W Z B V , 9090 215 Resipol9117 216 Resipol9414 218 Cfystic 196 220 ctystic 780 223 Sirester FS 0926/MTR, FS W I R 228 Sirester IS 0841IR 230 Sirester IS 0886/D, IS W I R 231 HPR AlO2RM 225 HPR P139A, HPR P380AR 226 Viapal H228 232 Viapal VUP 4665E 234 Beetle 8877 165 Norpol 820-030 197 Sirester ES 0925/MZR 227 Viapal N614 233 Distitron 461ST 201 Resipol 9090 216 Sihar SIL 14DE-903, SiL 158E-359 183 (No information provided) 332 Silmar SIL 65BQ-249 et ai 184 Silmar SIL 75BE-929 185 Silmar S249lA 209 Polylite 32737 210 Silmar SIL 74DA-932 184 DistitronZ230 331 Beetle 8135 163 Norsodyne 6394.21 1,6395.211,6398.210 172 Palatal P51 174 Distitron 191,412V2 200 Distitron449NT9 201 Polymar PMG432 202 Dynopol 2529,25301BIC 203 (No information provided) 332

67

Databook -

-

-

Unsaturated Polyester Laminating Resins continued: SIR Tank repair lnterplastic Corp Teraphthalic type DSMoBASF Reichhold Chemicals Teraphthalic/NPGtype

Cray Valley Vosschemie Tetrachlorphthalic anhvdride tvae Jotun Polvmer Tetrahydrophthalic type Cray Valley Jotun Polymer Translucent laminatedsheeting BIP Ltd Cray Valley

-.

DSMoBASF lnterplastic Copr Jotun Polymer

Sirester EC9120 Silmar SIL 75BA-602/A Palatal 420 Palatal PSI Atlac 400-15 Polylite 33480-00 Norsodyne 6398.210 Viscovoss T40B Norpol 810 Series Norsodyne 16030V N o w 1 620-000 Beetle 8026 Norsdyne 6347.007 Norsdyne 367.007,6367.008 Synolite 6815-N-1 Silmar SIL 15BE-359 Norpol 330-000 Distitmn 201AZ Distitmn 5142 Polytex GR 200-22 G193L, 194L, G200LE Dynopol2421 Wresipol 31421 Viapal H240S viscovoss WL5 85-15-1 08 Distitron H484 Sirester ES 0880 Viapal N600,N614 Viapal VUP 46538 w-2209/10, w-2213 N O w l 431-048 Polynex GR 200-12 Sirester ES 0880 Sirester FS 1214/C Viapal VUP 4640ES, VUP 46538

227 184 173 174 209 211 172 236 197 173 193 163 170 171 177 183 187 190 200 20 I 204 207 208 212 232 236 167 202 227 233 234 180 190 204 227 229 234

APL 1400 Envirez 8030 F11-2000, W-1801 W-l811/12, W-1813/14, W-l819/20, W-l821/22 W-I 829/30, W-I 843/44, W-I 847/48, W-I 859 Ampol 702 Polymar PGL 322324, PMG 432434 712-1946,732-1I36 Wresipol 31395 HTP-144, HTP-402, HTP-402-99 HPR CH75TA FUN 911 A 300E G103E G193L, G194L. GZWLE, K530frE Sirester FS 0794 Distitmn 441S 8-3-P, 80-6100VX, 81-6020 81-4377E Polytex GR 200-25 Dynopol 2529,2530/B/C Ctystic 397PA

161 166 178 179 179 181 202 203 212 214 226 186 205 206 207 228 200 162 166 206 208 222

NO/pol43l-OOO

Lonza SPA

- Flame retardant

- UV stabilised

Naptha Resins Neste Norpol Polymer Resinous Chemicals Vianova Resins Vosschemie Blagden L o r n SPA SIR Vianova Resins Gwil Industries Jotun Polymer Naptha Resins SIR Vianova Resins

Unclassified type General purpose

-

- UV stabilised Vacuum bag fabrication Vehicle application Water engineering application

Wine Laboratories approval

-

Vinyl Ester Laminating Resins Bisphenol-A based

Bisphenol-A, epoxy based

- rubber modified 68

Akemi Inc Ashland Chemical Gwil Industries Huntsman Chemical Marubeni Specialty McWhorter Tech. Resinous Chemicals Resin Services Sirca SPA Jiangyin Crabec Neste SIR Lonza SPA AlphdOwens Blagden Naptha Resins Norpol Polymer Scott Bader DSMeBASF Lonza SPA Swancor AlphatOwens Jotun Polymer Reichhold Jotun Polymer

Palatal A430, A4301, A430N, A430U, A431 Distitron VE 100, VE 200 Swancor SW-901 et al Swancor 911 HydrOpd E-010-01/06, E-010-TB, E-01O-TC Norpol 8100-050 et al. 8300-045 et al Norpol 8515 Norpol 8710 et al Dion 9100NP/9102 Norpol 8550 et al

130 136 142 143 121 136 136 136 138 136 8 136

- Comprehensive index: Vinyl Ester - Laminating Resins Brominated Centrifugal casting application Cold-press moulding application Continuous sheeting application DCPD based Epoxy

-

brominated, flame retard.

- novolak

Filament winding

Reichhold Swancor Jotun Polymer Huntsman Jotun Polymer AlphalOwens Jotun Polymer McWhorter Tech. Naptha Resins Jotun Polymer Alpha/Owens Ashland Chemical Jotun Polymer Naptha Resins Vianova Resins Ashland Chemical Jiangyin Jotun Polymer Naptha Resins Reichhold Showa Highpolymer Swancor

Flake glass use

Ashland Chemical Showa Highpolymer

Flame retardant

Swancor Ashland Chemical Huntsman McWhorter Tech. Reichhold Showa Highpolymer Swancor

Flexible Food stuff use ‘General purpose’

Hand-lay, spray

Ashland Chemical McWhorter Tech. Gwil Industries Huntsman Jiangyin Jotun Polymer McWhorter Tech. Saudi Industrial Vosschemie Ashland Chemical Jotun Polymer Naptha Resins Showa Highpolymer Swancor

Impact resistance lsophthalic modified Low temperature (-150%) Low voc Marine use Novolak type continued:

Vosschemie Swancor AlphaIOwens Showa Highpolymer Ashland Chemical Alphalowens Ashland Chemical Swanwr DSMoBASF Swancor

Dion 9300 Swancor SW-905 et al Norpol 8100-050et al, 8300-045 et al Norpol 8515, 8550 Norpol 8300-045et al, 8440 Hetron 4036P Norpol 8300-045 et al, 8440 HydropelA 15.604, AW15.654 Norpol 8770 VeriMac 781-0410,785-0644, 785-8430 et al Polynex GR 200-60 Norpol 8440 E485 Series Hetron 970135 Norpol 8730436 et al Powex GR 200-65 Viapal VUP4652 Hetron 922,922L, 922L-25, 922/35 Hetron 980% Fuli 883 Norpol 8300-045 et al, 8440, Notpol 8710 et al, 8730-036 et al Polynex GR200-60 Don 91OONPl9102 Ripoxy H-600 EX-1, H-610 EX-1, H-630 EX-1 RipoXy R-802 EX-1, R-804 EX-1, R-806 EX-1 Swancor SW-901 et ai Swancor SW-908,911 Hetron 922,922L, 922L-25, 922l35 Hetron 980.980135 Ripoxy H-600 EX-1, H-610 EX-1, H-630 EX-1 Ripoxy R-802 EX-1, R-804 EX-1, R-806 EX-1 Flake Compounds Hetron FR922 Hetron FR 99OZX, FR 992, FR 922RT Hetron FR992H VeriMac 152-0584 Dion 9300 Ripoxy S-510 EX-1, S-550 EX-1 Swancor SW-905 et al Swancor SW-908 Hetron 922,922L, 922L-25, 922/35 VeriMac 781-0410.785-8430et al W-2299 Hetron 822PA, 922, 9224,960, 6710PA FUR 9303 Norpol8300-045 et al VeriMac 1574584,7858430 et al (No information provided) Viscovoss PHA10/11 Hetron Q22,922L, 922L-25,922/35 Hetron FR992 Hetron 980,980135 Norpol 8300-045et al Polyflex GR 200-60 Ripxy H-600 EX-1, H-610 EX-1, H-630 EX-1 RiPOXy R-802 EX-1, R-804 EX-1, R-806 EX-1 Swancor SW-901 et a1 SwancorSW-908,911 Viscovoss PHA10111 Swancor SW-980 Hydropel E-015-HC and DB/OO/DF Ripoxy R-802 EX-1, R-804 EX-1, R-806 EX-1 Hetron 980/35 Hetron FR 99OZX Hydropel A 15.604 Arofech 9OOo Swancor 915 Palatal A440 Swancor SW-900 Swancor SW-907

138 142 136 136 136 134 136 121 136 137 138 136 122 123 136 138 143 123 123 134 136 136 138 138 139 140 142 143 123 123 139 140 299 123 124 134 137 138 140 142 143 123 137 133 134 134 136 137 332 144 123 124 123 136 138 139 140 142 143 144 143 122 140 123 124 121 122 143 130 142 143

69

Databook -

-

-

Vinyl Ester Laminating Resins continued: Primer Hawkeye Industries Pultrusion application Jotun Polymer McWhorter Tech. Swancor RTM application

Solvent resistance Styrenated Tank lining application

70

Ashland Chemical Jiangyin Jotun Polymer Swancor Ashland Chemical Jotun Polymer Showa Highpolymer

Tubular type products appl. Urethane modified

Reichhold DSMoBASF

Vacuum bag fabrication

Vosschemie

Durafec Vinyl Ester Primer

Norpol 8300-045 et al, 8440 Norpol 8730-036 et al VeriMac 157-0584 Swancor SW-901 et al Swancor SW-908,911 FR 992RT Fuli RTM-3 Norpol 8100-050 et al Swancor SW-901 et al Swancor SW-908,911 Swancor SW-977 Hefron FR 992 Norpol 8515,8550 et al R@OXY H-600 EX-1, H-610 EX-1, H-630 EX-1 Ripoxy R-802 EX-1, R-804 EX-1, R-806 EX-1 Dion 9100NP/9102 Atlac 580/ACT, 581,582 Atlac 583 Viscovoss PHA10111

297 135 136 137 142 143 24 I 134 I 35 142 143 I 43 124 135 & 136 139 140 138 129 130 144

- Key To Tabulated Properties DATABOOK : KEY TO TABULATED PROPERTIES Throughout the following Directory pages, and when made available by the manufacturer or supplier, each thermoset resin description is accompanied by typically, a two-line tabulation, highlighting a maximum of 18 important resin and laminate properties, using codes a. to r. as below. These must be considered indicative values for guidance only, as like any property evaluation all are clearly open to some variation. Consequently they do not, and must not form, any part of an individual resin specification. Further information should always be requested from the manufacturer or supplier, and then ultimately confirmed by actual laboratory or production evaluation. Liauid Resin ProDerties

-

a.

Specific Gravity

b.

Non-Volatile Content

c.

Viscosity

d.

Acid Value

e.

Gel Time-

f.

SPI Gel

g.

Barcol Hardness

h.

Shrinkage

i.

Heat Distortion

j.

Water Absorption

-

k.

Flexural Strength

-

I.

Tensile Strength -

In glcc Q 25OC

-

In weight %age. In poise (p), (cp) or (dp) with the second figure after / denoting the temperature OC, or as Brookfield LVF mPas Q 23OC, typically No. 3 spindle Q 60rpm.

-

In mgKOH1g. The first figure (or range) shows minutes, with after / the temperature OC, based on typical accelerator and catalyst additions for the particular resin concerned.

-

Minutes at 82OC.

-

A volume YO change from liquid to solid state.

-

Temperature shown in OC. Weight change value in mg, then after /, the time whether 24 (hours), 7 (days), or 28 (days), or as Weight change value as a %age, then after /, the number of days, or finally as Value as DuVReg figure. In Mpa. In Mpa.

m. Flexural Modulus n.

-

All Q 25OC.

In Gpa.

Tensile Elongation -

In %age.

Laminate ProPerties Typically based on a 3 x 150g/m2, 30% by weight reinforcement, chopped strand mat laminate, unless otherwise indicated.

p.

Tensile Strength -

In Mpa.

q.

Flexural Modulus -

In Gpa.

r.

Tensile Elongation

0.

In Mpa.

Flexural Strength

-

All Q 25OC.

In %age.

71

A ADH ESlVES Adtech Corporation Ashland Chemical Inc BIP Ltd Bryte Technologies Inc Ciba Specialty Chemicals ITW Plexus Permabond Resin Services Inc Scott Bader Company Ltd Showa HighpolymerCo Ltd SP Systems Ltd Vosschemie GmbH

Page 75

76 80 81 82 83 84

73

- Bryte TechnologiesInc

A

ADHESIVES

EA-602 A general purpose unfilled epoxy with a long working time. EA-604 A fast cure epoxy with excellent wettability, that will successfully cure at temperatures as low as -27OC. EA-605 A quick-set epoxy paste offering superior adhesion to FRP composites. EA621 A semi-rigid epoxy adhesive for FRP composites application.

Polvrtrip Adhesive Svstems A series of two-part epoxy structural adhesives engineered for high heat (22OOC) applications. Excellent for rnetal-to-metal bonding. 7300 A primerless adhesive offering excellent adhesion to a variety of thermoset and thermoplastic substrates and tolerant of wide cure cycle variation. 7400 A primerless adhesive designed for heat fixture or radio frequency cure assembly, whilst also offering long bondable open times at room temperature. Ideal for high performance composites, including automotive and personal watercraft assembly. 7700 Sandable within a short period of application whilst providing working times of up to 35 minutes and suitable for example for marine and automotive repair applications. 9400 Designed for cold-fixture assembly operations followed by minimal post-bake. Strength develops rapidly after application, allowing for productivity gains through faster cycle times.

Beetle 8937 A highly flexible, non-accelerated, low viscosity orthophthalic resin allowing high filler loading, high resistance to freezeAhaw cycling, rapid gel-time and cure rate, specially formulated for the jointing of earthenware pipes.

I a;

1.01

11 bi

65%

1 ci

11 di

1.6~125

25

11 ei

11 f f

I gl

u hi 3.3% 11

i

i

1

EX-1502-1 A 121OC curing, toughened thixotropic, two-part cyanate ester paste adhesive offering excellent mechanical performance in addition to low moisture absorption and low outgassing, together with excellent crack resistance. Ideal for space and cryogenic applications. a. 1.18 Tg 127OC

continued: 75

Databook - Section A :Adhesives Bryte Technolgies Inc - continued: EX-1508A A toughened high performance epoxy film adhesive curing at 95 12OOC.

-

EX-1516 A 121OC cure toughened cyanate ester film adhesive formulated for use in specific applications where low moisture absorption and/or low dielectric constant/low loss are of utmost importance. The system’s strength and toughness when bonding solid, honeycomb or foam core structures, is comparable and often greater than high performance epoxy adhesives, particularly at elevated temperatures. EX-1537 & EX-1537-1 A family of 177OC curing, toughened cyanate ester paste adhesives. EX-1537 is a thixotropic two-part paste and EX-1537-1 is of lower viscosity. Both offer excellent mechanical and thermal performance in addition to low moisture absorption and low outgassing, coupled to excellent microcrack resistance, all ideal properties for space and cryogenic applications. EX-1543 A 177OC cure toughened cyanate ester film adhesive formulated for use in specific applications where low moisture absorption and/or low dielectric constant/low loss are of utmost importance. The system’s strength and toughness when bonding solid, honeycomb or foam core structures, is comparable and often greater than high performance epoxy adhesives, particularly at elevated temperatures. Tack’n Roll Eooxv Tackina Film A special, easy to use, process aid ‘adhesive’, fully miscible with a variety of resin matrices, specifically developed for tacking prepregs, fibres, or for example RTM preforms into a mould or on to a mandrel. Available in different widths.

Araldite 203 A cold curing epoxy adhesive developed primarily for bonding load-bearing inserts into honeycomb sandwich panels. Suitable for operation up to 15OOC. Araldite 204 A one-pack, black, thixotropic foaming and extrudable epoxy paste adhesive, developed primarily for bonding segments of honeycomb core and for bonding the edges of the core to structural edge members in bonded sandwich panels. Suitable for long-term operation up to 90°C and short-term up to 120OC. Araldite 206-NA A modified epoxy, foaming adhesive in sheet form which during the 12OOC curing expands to fill gaps and adhere strongly to all parts of the typically honeycomb sandwich construction. Designed for use in conjunction with Araldite 312, 312/5 or 609, where the operating temperature can be between -55OC and +1oooc. Araldite 20815-NA A modified epoxy, foaming adhesive in sheet form which during the 180°C cure, expands to fill gaps and adhere strongly to all parts of the typically honeycomb sandwich construction. Designed for use in conjunction with Araldite 308, 308A structural film adhesives, where the operating temperature can be between -55OC and +120°C. Araldite 212-NA A modified epoxy, foaming adhesive in sheet form which during the 12OOC cure, expands to fill gaps and adhere strongly -to all parts of the typically honeycomb sandwich construction. .Designed for use in conjunction with Araldite 312, 312/5 or 609, where the operating temperature can be between -55OC and +1oooc.

76

- Ciba Specialty Chemicals Araldite 219l2-NA A modified epoxy, foaming adhesive in sheet form which during the 175OC cure, expands to fill gaps and adhere strongly -to all parts of the typically honeycomb sandwich construction. Designed for use in conjunction with Araldite 319, 319A or 322 structural film adhesives, where the operating temperature can be between -55OC and + I 5OOC. Araldite 219/3-NA A modified epoxy, foaming adhesive in sheet form which during the 175OC cure, expands to fill gaps and adhere strongly to all parts of the typically honeycomb sandwich construction. Designed as a low exotherm version of Araldite 219/2-NA, and for use in conjunction with Araldite 319, 319A or 322 structural film adhesives, where the operating temperature can be between -55OC and + I 5OOC. Araldite 308A-NA A high strength modified epoxy adhesive in film form (300g/m2) and supplied on a release paper backing and coloured interleaving polythene carriers. Araldite 312, 312L & 312UL A high strength modified epoxy adhesive in film form and of varying weight, supplied on a release paper backing and coloured interleaving polythene carriers, and for sandwich core-to-skin bonds in aerospace and similar high-duty applications. Araldite 31215 A grey high strength modified epoxy non-tacky film adhesive containing a knitted nylon carrier, and supplied on a release paper backing with polythene interleaving. Araldite 319 Series A series of modified epoxy film adhesives curing at 175OC, available both supported on a woven nylon carrier, or unsupported, at areal weights of between 180 and 400g/m2. Araldite 322 A high strength supported, modified light-weight epoxy film adhesive, designed for sandwich core-to-skin bonds in aerospace and similar high-duty applications, where operating temperatures up to 22OOC may be experienced for short periods, or 2OOOC for long periods. Araldite 326 A modified bismaleimide film adhesive available in two standard weights (250 & 500 g/m? for composite applications where service temperatures of 2OOOC or greater are required. Araldite 330 Series A range of four adhesive films for bonding and finishing composite components. Araldite 335K A supported film adhesive curing at 12OoC, available at areal weights of 150 & 300 g/m2, both containing a knitted nylon carrier for peel strength enhancement and .glueline thickness control. Araldite 403 A two-part cold cured epoxy paste adhesive, suitable for honeycomb-to-skin bonding, which can be employed in conjunction with riveting and possessing good strength retention up to 120OC. Araldite 408 A two-part, room temperature or warm curing adhesive paste, very suitable for composite structural repair schemes where normal heating and clamping facilities during cure are not available. Araldite 420AIB (Previously known as Redux 420) A tough, resilient system with good moisture resistance and excellent peel and shear strength. e. 80123 i. 7OoC a. 1.05

continued: 77

Databook - Section A :Adhesives

-

Ciba Specialty Chemicals continued:

Araldite 501 A two-part, ambient or warm curing epoxy composite repair adhesive. Araldite 609 A high strength modified epoxy structural film adhesive for general engineering applications, incorporating a light-weight cotton scrim to ensure easy handling whilst cutting and positioning. Finds wide application in the manufacture of light-weight components based on honeycomb sandwich construction techniques. Araldite R382-3 A 12OOC curing, modified epoxy, supported film suitable for bonding a wide variety of substrates using various temperature cure cycles. The Araldife 2000 range. The industrial designation is given in parenthesis.

201 0

7

(XD 4443/XD 4444)

Tough, high peel strength, fast cure, epoxy paste adhesive for SMC or other structural GRP application.

201 1

7

(AW 106/HV 953U)

A multi-purpose, standard cure, two component, epoxy paste adhesive for SMC or other structural GRP application.

201 2

.__

(AW 2104/HW 2934)

A multi-purpose rapid cure, moderately good, two component epoxy paste adhesive for SMC or other GRP structural application.

201 3

7

(AV 144-2/HV 997)

A metal coloured two component epoxy paste for metal bonding, also good for GRP or SMC. a. 1.2 e. 50-80/23 i. 6OoC

2014

7

(AW 139/XB 5323)

A heat and chemical resistant two component epoxy paste adhesive, moderately good for GRP and SMC.

2015 (AV 5308/HV 5309)

201 6 -

(XD 4417/XD 4418)

A toughened two component epoxy paste adhesive suitable for GRP and SMC bonding. a. 1.4 e. 60/23 i. 75OC A tough, high peel strength, flexible, standard cure two component epoxy adhesive, excellent for GRP and SMC.

2017 (XD 4417/XD4420)

As for 2016, good for GRP and SMC.

201 8

(XD 4445/XD 4446)

201 9 (AY 103/HY 991)

A two-component PUR adhesive for thermo-plastic bonding, but also good for GRP and SMC. Low viscosity two component epoxy adhesive system for laminating, moderately good for bonding GRP and SMC.

2020 (XW 396/XW 397)

78

A clear glass bonding two component epoxy adhesive, also good for GRP and SMC.

- Ciba Specialty Chemicals

2021 (XD 4661AMD 4661B)

2022 (XD 4662NXD 46628) 2023 WD 4663NXD 46638)

General purpose, tough, rapid, two component methacrylate adhesive, excellent for GRP and SMC. A chemical resistant, tough, fast, two component methacrylate adhesive, excellent for GRP and SMC.

7

A flexible, sandable, tough, two component methacrylate, excellent for GRP and SMC.

AW 2105/XD 4419 A two component epoxy, laminating adhesive system for sandwich panel construction, for application by spray or roller and offering rapid strength development (i.e. having a limited ‘open‘ time), high tensile modulus and strength. XB 5090-1/XB 5304 A two Component PUR laminating adhesive system for panel construction, for application by roller or spray and offering a high modulus.

XD 4424/XD 4425 A thixotropic two component epoxy assembly adhesive for application by trowel or roller, with good gap filling properties and offering a long ‘open’ time. XD 4436/XB 5304 A thixotropic two component PUR assembly adhesive for application by trowel or roller, with good gap filling properties and very suitable for use in metering/mixing equipment. XD 4450/XB 5304 A two component, low viscosity PUR laminating adhesive system for panel construction, for application by roller and offering a high peel strength. Is also a proven repair system for honeycomb panels. XD 4457/XD 4412 A two component epoxy, low viscosity, laminating adhesive system for sandwich panel construction, for application by spray or roller, designed for an 8 hour manufacturing cycle. XD 4457/XD 4458 A two component epoxy, laminating adhesive system for sandwich panel construction, for application by spray or roller and offering a long ‘open’ time, overnight handling strength and good peel strength and high elongation at break. XD 4465/XB 5304 A two component, PUR laminating adhesive system for panel construction, for extrusion or roller application, offering little or no foaming tendency and a very high elongation to break. XD 4467/XB 5304 A two component, low viscosity PUR laminating adhesive system for panel construction, for spray or roller application having the longest PUR ‘open’ time. XD 4485/XB 5304 A two component, PUR laminating adhesive system for panel construction, for spray or roller application and offering rapid strength development and good resistance to foaming. XD 4664NB A two component room temperature curing methacrylate adhesive offering an excellent bond to plastics, composites and certain metals.

continued: 79

-

Databook Section A :Adhesives

-

Ciba Specialty Chemicals continued: XD 4665AIB A two component room temperature cure, colour stable, methacrylate adhesive for bonding GRP composites.

Epibond 156AIB An excellent wipe-on smoothing paste for repairs and for finishing porous surfaces, with good adhesion and i. 8OoC electrical properties. a. 1.2 20-40/23 EIoibond 1559AIB A rapid cure, repair adhesive, ideal for low temperature maintenance conditions, offering handling strength in 10 minutes. a. 1.2 e. 6/23 i. 8OoC Epibond 1567AIB-40 A tough and resilient adhesive with temperature resistance of 15OOC. a. 1.2 Epibond 1568AIB A rapid cure adhesive excellent for structural and interior repair. a. 1.25

i. 15OOC

e. 90/23 e. 3/23

i. 8OoC

Uralane 5774AIB An excellent high strength two component, self-extinguishing PUR adhesive for thermoplastics and metals, i. 8OoC requiring minimal surface preparation, with an excellent peel strength. a. 1.15 e. 15-25/23

The following range of adhesives is suitable for the bonding of epoxy, phenolic, polyester and vinyl ester composites - and respective gelcoat surfaces - as well as SMC and BMC mouldings.

I

MIXED VISCOSITY GRADE A0420

I peel and impact

...........................

A0420FS

I I I

most plastics &

Non sagging gel

............................

Non sagging gel Non sagging

...........................

For difficult to bond plastics .................................... General

ne!...................... Non sagging ne!...................... Non sagging

...........................

.PK.I??Se...................

9e......................... l

MA320

.I?................................. urpose

Self levelling, can be brushed rolled or sprayed ................................... ........................... Non yellowing MA550 UV stable ................................................................................. ........................... Resists impact ;;k~; 1O:l MA3940 and vibration ................................................................................. ........................... 1O:l MA3940LH Fast curing version of MA3940 MA440

80

I

1

WORKING TlMElMlNS

I

1

FIXTURE TlMWMlNS

.......................................................................................... 1

2to3

3to4

...............................................................................................

........................... MA300 ........................... MA310

OPEN TlMElMlNS

1 I

Self levelling

3

4 to 8

10 to 15

............................................................................................... 10

10 to 11

30 to 35

................................................................................................ 4 to 5

10

25

............................................................................................... 15

20

30

......................................................................................... Non sagging

30 to 35

35 to 40

60 to 65

......................................................................................... 4 to 5

ae!......................

Non sagging gel

15

30 to 35

........................................................................................ 3 to 4

4 to 5

8 t o 10

I

1

- Permabond

I

TYPICAL PERFORMANCE

RESIN

Colour Viscosity (mPas) Specific Gravity

Colour Viscosity (mPas) Specific Gravity

Colourless 40 I.05

1

Clear 60,000 1.2

Tensile Strength (Mpa) 20 Handling Strength 1 - 7 secs Full Strength 24 hrs Gap Fill (max) 0.1mm

PART B HARDENER

MIXED

MIX RATIO (BY VOL)

Clear 12,000 1.13

Clear 35,000 1.16

1:l

TYPICAL PERFORMANCE

Usable Life 3min Q 23OC Handling Strength 5 min Q 23OC Working Strength 30 min Q 23OC Full Strength 24 hrs. Q 23% Gap Fill (vertical) e1mm Lap Shear Strength (Mpa) 9

E04 A w o part epoxy for structurally demanding applications, offering a fast cure, excellent resistance to vibration or impact loading. Particularly suitable for bonding wet-lay, SMC or BMC components. TYPICAL PERFORMANCE

E l1 A w o part epoxy with remarkable resistance to both static and dynamic loading, and high structural integrity, plus high environmental durability. Similar to E32, but its lower viscosity is more suitable for applications where a thin bond line is essential. TYPICAL PERFORMANCE

continued:

81

-

Dafabook Section A :Adhesives

-

Permabond continued:

E l5 .Aersatile two part epoxy for the bonding of a wide variety of similar and dissimilar surfaces, with a long working life to produce high strength joints capable of resisting fatigue and impact loads. TYPICAL PERFORMANCE

E32 A two part epoxy with remarkable resistance to both static and dynamic loading, and high structural integrity, plus high environmental durability. Available in a ‘EDS’ cartridge pack permitting accurate metering and mixing directly onto the working area. TYPICAL PERFORMANCE

F246 A toughened two-part, ‘no-mix’ acrylic adhesive which cures rapidly at room temperature and offers exceptional resistance to peel, fatigue and impact loads and is ideal for a wide variety of materials. Can readily replace rivets and/or welding.

7

III1

RESIN

II

TYPICAL PERFORMANCE

I MaximumGaD

0.75mm

II

I

* Depending on the Initiator

HST-5 A 100% reactive, clear unfilled epoxy resin offering excellent moisture and chemical resistance, and good impact resistance at low temperatures, with many adhesive applications. WB-400

A clear unfilled all purpose epoxy for adhesive applications and offering good moisture and chemical resistance with good flexural strength. The standard hardener is WH-150, but a faster cure can be obtained with SC-152. A further hardener applicable to WB-400 is SC-150-N.

82

- SP Systems Limited

Cresfomer 1152PA A unfilled, highly thixotropic paste, urethane acrylate flexible adhesive for shock absorbing and impact absorbing structural fillets. Bonds FRP and a wide range of substrates. Accepted by Lloyd’s and Det Norske Veritas, for marine application. ai 1.03

..

11 b f 53% 1 kf

I[

ci

11 I i

26

11 d f 11

11 et 11 n;

50/25 100% 1

01

11 f i

II sj

I

Pf

1 hf 5% II q!

24OC

i

11 r i

Cresfomer 1186PA A filled. thixotroDic Daste, urethane acrylate, gap filling, structural adhesive. Bonds FRP and a wide range of substrates. Fasier and slower curing versions available. Accepted by Lloyd’s for marine application. ai 1.32

J. i.

11 bi

74%

11 ki

ci

11 I i

14

11 d f 11 mi

11 e [ 11 ni

50/25 6% 11

1f f 0;

u si

u Pi

11 hl

u si

5%

i

i

27OC rf

Cresfomer 1196PA A thixotroric low density core bonding adhesive paste designed to bond primed balsa and PVC cores in sandwich constructions.-Accepted by Lloyd’s for marine application. a! 0.58 .. li

11 bi

53%

11 ki

ci

11 I

19

11 di 11 mi

11 el 11 n;

50/25 11 f 6% 11 o i

i

u s!

II P i

11 h f

I

4.5% qi

1 i i 5OoC 11 r i

CP-819 EX-1 A vinyl ester adhesive for bonding concrete, metal and glass.

804BDA RED EX-1 A vinyl ester adhesive for bonding concrete, metal and glass.

SP Handipack A multi-purpose epoxy adhesive system suitable for gluing, coating and laminating, or with the addition of SP Filler Powder (4 grades available), for all forms of-filling, whether wood, metal, GRP or concrete. SP 106

An all-purpose epoxy for gluing, coating, laminating and filling, particularly in the manufacture of wood/epoxy composites as in boat-building. SP 320 An extremely versatile, solvent-free, clear, low viscosity, high-performance, all purpose epoxy for gluing, coating, laminating and filling

Saabond 120 A high strength, tough epoxy adhesive offering a long working time in the bonding of a wide range of high strength materials, particularly metals, GRP and other composites, concrete and wood. Saabond 125 A highly thixotropic, but grease-like, epoxy adhesive system of exceptional strength and toughness for the bonding of a wide-range of high strength materials, including metals, GRP and other composites, concrete and wood. continued:

83

-

Databook Section A :Adhesives

-

SP Systems Limited continued: Spabond 130 A high strength, highly thixotropic, epoxy adhesive with a long working time, for the bonding of large structures where the substrate surfaces have uneven geometry. Offers good gap filling properties, typically between 5 - 25mm and two hardener options, fast and extra slow.

Viscovoss K L 4 A light-weight, preaccelerated, cold curing, polyester bonding resin based on orthophthalic acid, offering good impact, moisture and selected chemical, resistance.

84

B FLOWCOATS, TOPCOATS & SURFACE COATS Ashland Chemical Company Cook Composites and Polymers Futura Coatings Inc Gwil Industries Inc Hawkeye Industries Inc lnterplastic Corporation Jotun Polymer AS (See note prior to resin descriptions) Lilly Industries Inc Llewellyn Ryland Ltd Lonza SPA Resin Services Inc Resisa Scott Bader Company Ltd Tool Chemical Co Inc Vianova Resins AG Vosschemie GmbH

Page 87

88 89

90

91

85

- Hawkeye lndustries Inc B

FLOWCOATS, TOPCOATS & SURFACE COATS

(For Primers, see H3)

Hetrolac 105 A very low viscosity clear lacquer containing a UV absorber to protect FRP components from the effects of weathering. Can also be employed to restore gloss and lustre to already weathered components.

Polvcor Enamels PB63 Similar to gelcoats except that they cure tack free and are spray applied like paint, to seal and hide a substrate. They provide a hard, tough, durable and flat finish. However they cannot be used as gelcoats and are typically interior finishes only which at least for the standard enamel are not suitable for water immersion. Full surface preparation and application recommendations should be obtained from the manufacturer.

-

I a/

1.13-1.4

11 bl

60-65%

11 c i

12,000-17,000cps

-

1 di

11 el

10-13/25

I

Ultrachrome 650 A highly flexible post-moulding finish. Ultrachrome 654 A ‘hard-coat’ urethane finish designed for use over rigid substrates when abrasion resistance and weatherability properties are a must. It meets or exceeds an ‘automotive quality’ type of finish.

W-I 936 A flexible,waxed, corrosion-resistant isophthalic topcoat with a high degree of resiliency or toughness. c. 400-450 e. 25-35/21

(Other Duratec coating-type materials can be found under Section G8 and H3.) Duratec Hi-Gloss Coatinos A special blend of polymers available in standard primaly colours that can enhance colour and light stability, chemical resistance, and the component surface impact resistance.

87

-

Databook Section 6 :Flowcoats, Topcoats & Surface Coats

Silmar SIL65BQ-249 An orthophthalic suitable for general coating purposes. c. 425 SIL65BQ-249A SIL65BQ-250 SIL65BQ-250A

A UV stabilised variant of SIL65BQ-249. A waxed variant of SlL65BQ-249. USDA approved. A UV stabilised variant of SlL65BQ-250.

Silmar SlL75BA-602 A corrosion resistant isophthalic primer seal coat. c. 300 SIL75BB-602A

e. 13/25

e. 28/25

A SIL75BA-602 variant containing a wax additive.

Shortly before going to press, the company was acquired by Reichhold Chemicals Inc. Chanaes to Jotun manufacturing units, name, distribution or other arrangements, and with regard to possible alterations in the respective resins supplied, have not been advised. The nomenclature for “Norpol” flowcoats typically follows that given under the gelcoat listing for this manufacturer. Noraol MT An isophthalic/orthophthalic general purpose topcoat offering mild weather resistance and available in different viscosity (GSF; HIS and GPE-S) as required by marine/pleasure, building/construction and transportation/communications applications. Fire retardant grades also available. Approved for marine use by Det Norske Veritas and Bureau Veritas.

11 bi

a; j

;

78

I ki

1 cj 11;

1 d; 70

11 e;

Im;

U

ni 3.5%

1 f; 10;

II si, Pi

1 hi I qi

N i ; 84OC 1 r/

NorRol NTA A high quality isophthalic/NPG general purpose topcoat offering some chemical resistance and good weather resistance, and available in different viscosity (GSF; H/S and GPE-S) as required for sanitary/cultured marble/swimming pool application. a; j t

61

1 bj 11 ki

1Cf 11

70

11 di 11 mi

11 e! nj 4.5%

11 f ;

I si.

0:

Pi

I]

1 hi II 4;

11 i j

93%

1r i

IMPACT GREY PRIMER 5788E90009 This, in mould polyester acrylic coating technology, using a proprietary polymer giving fast spray applied film cures free of porosity, is designed to provide fast part production. It provides an ideal recoating surface, accepting paints, enamels, lacquers, polyester and epoxy finishes.

88

- Resin Services Inc

TD.15 FCI(H)

A preaccelerated, clear, standard isophthalic flowcoat for application by brush - hides surface blemishes and improves product appearance. Shows excellent weathering properties and particularly suitable for use in the marine environment.

FCI (S)

Version for spray application. c 500-600

TD.16 FC2(H)

A preaccelerated, clear, standard isophthalic slipresisting flowcoat for application by brush surface blemishes and improves product appearance.

1a;

11 b!

66-70%

11 ci

u df 20-26 11 e!

7-10/25

11 f

II si

11 hj

- also hides

11 i i

0

Distitron 152 An isophthalidNPG base, topcoat of very good transparency offering good filler and pigment wettability.

HSC-302X A high temperature resistant, room temperature cure, brush applied epoxy surface coat, which is highly polishable and specially formulated for nickel mandrels. HSC-509 A two component epoxy surface coat offering excellent chemical and extremely high temperature resistance. HSC-902

A special, black, epoxy surface coat yielding high gloss and abrasion resistance with high temperature resistance. HSC-905

A two component epoxy surface coat offering excellent chemical and extremely high temperature resistance. Two alternative hardeners are available, HT-8433 and HT-9234. HTR-212 A unfilled clear epoxy, room temperature cure, tough, strong, surface coat for medium temperature applications and offering good chemical resistance. RSC-301X

An ‘ultra-white’ (or black), room temperature cure, brush applied epoxy surface coat with a variety of uses. Unique is it’s ability to bond to another surface coat after it is fully cured. RSC301XB

A light blue, room temperature cure, brush applied epoxy surface coat with a variety of uses. Unique is it’s ability to bond to another surface coat after it is fully cured. Two hardeners are available SC-150-NB (meeting Boeing specifications) and SC-60-N SLOW.

-

89

-

Databook Section B :Flowcoats, Topcoats & Surface Coats

ResirDol 9191 An unaccelerated paraffinated orthophthalic resin for use as a top coat.

I qj

II Pi

1 rj

The company manufacture a range of epoxy surface coat materials, typically for composites tool construction.

352 353 414

603

605

An abrasion resistant surface coat. A surface coat with a long tack time for improved inter-layer bond. A surface coat offering excellent impact and wear resistance. A high gloss, chemical resistant, high temperature surface coat. A carbon fibre filled, high temperature surface coat.

Viapal L 700 A medium reactivity, high viscosity topcoat offering good chemical resistance, which cures tack-free with a c. 3000 4500 high gloss. Approved by the Austrian-FoodstuffsAct 1975. b. 65%

-

ViarDal 960B A highly thixotropic, preaccelerated, isophthalidNPG brushing topcoat offering high chemical resistance, which cures tack-free. b. 53.5% 960BE

90

An enhanced storage version of 960B.

- Vosschemie GmbH

Polyester Glossfinish A clear, paraffin free, high gloss topcoat developed for the finishing of surfboards. Viscovoss LT 35 SB A cobalt accelerated, U V stabilised topcoat offering good resistance to chemicals, which hardens to a tack free and mat surface. Viscovoss LT 37 B A cobalt accelerated white topcoat based on NPG/isophthalic acid, offering very good resistance against chemicals, which hardens to a tack free mat surface. Viscovoss LT 40 SB A cobalt accelerated, UV stabilised topcoat offering very good resistance against chemicals, which hardens to a tack free mat surface.

91

C GELCOATS & IN-MOULD COATINGS c1

BISPHENOL-A, EPOXIDE & VINYL ESTER BASED Borden Chemical UK Ltd Naptha Resins & Chemicals Private Ltd SP Systems Ltd

c2

IN-MOULD COATINGS Cook Composites and Polymers Dulux Australia Ferro (Holland) B V Futura Coatings Inc Lilly Industries Inc Scott Bader Company Ltd SP Systems Ltd

c3

96

SMOOTHING COATS Blagden Cellobond Ltd Georgia-Pacific Resins Inc

c4

Page 95

97

TOOLING, PRODUCT REPAIR & ASSOCIATED Cook Composites and Polymers Ferro Corporation Ferro (Holland) B V Gwil Industries Inc Hawkeye Industries Inc Hawk International Distributors Ltd Jiangyin Crabec Synthetic Chemicals Co Ltd Jotun Polymer AS (See note prior to resin descriptions) Lilly Industries Inc Norpol Polymer Pte Ltd Polydyne Inc Scott Bader Company Ltd Showa Highpolymer Co Ltd Vianova Resins AG

98

99

100

See over for C5 & C6

93

C5

UNSATURATEDPOLYESTERBASED A C Hatrick (NZ) Ltd Akemi Inc BIP Ltd Cook Composites and Polymers Dulux Australia Ferro Corporation Ferro (Holland) B V GTI Process Gwil Industries Inc HK Research Huntsman Chemical Company Australia Ltd Jiangyin Crabec Synthetic Chemicals Co Ltd Jotun Polymer AS (See note prior to resin descriptions) Llewellyn Ryland Ltd Lonza SPA Marubeni Specialty Chemicals Inc Naptha Resins 8, Chemicals Private Ltd Neste Polyester Inc Norpol Polymer Pte Ltd Nuplex Industries Ltd Polydyne Inc Scott Bader Company Ltd Singapore Highpolymer Chemical Products Pte Ltd SIR lndustriale Vianova Resins AG Vosschemie GmbH

C6

101

103 105 106

108

110

112

113

URETHANE BASED Futura Coatings Inc

94

Page

114

- Dulux Australia C1

BISPHENOL-A, EPOXIDE & VINYL ESTER BASED

ERORhen ET3A A thixotropic bisphenol-A based epoxy gelcoat used with a variety of hardeners.

a. 1.2

Polvflex GR 200-31 A bisphenol based gelcoat offering superior chemical (alkali) resistance.

Polvflex GR 200-62 A hand-lay vinyl ester gelcoat for chemical resistant requirements.

SP 127 A highly thixotropic epoxy gelcoat offering improved water and yellowing resistance, and specially developed for use in conjunction with SP 631 laminating system. Both aromatic and aliphatic cured laminating systems can be employed. e. 20/25 SP 531 A grey, thixotropic gelcoat, specially developed for use with the SP 631 laminating system, offering improved resistance to chemical attack, including styrene. Both aromatic and aliphatic cured laminating systems can be employed. e. 20/25

C2

IN-MOULD COATINGS

Armorcote IMC PB-11 (951 Series) A range of advanced in-mould spray applied polyesters offering improved flexibility over gelcoats and developed to offer superior weathering resistance to surface yellowing and chalking for marine, transportation, construction and other applications where durability is critical. 951-W-P54 is the standard Armorcote base white.

I af

1.08-1.2

11 b l

54-63Oh

11 ci

10,000-19,OOOcps

1 di

11 e!

10-21/25

I

Company manufactures under licence the full range of Cook Composites and Polymers, in-mould coatings.

95

Databook - Section C2 :In-Mould Coatings

GM (Also coded, G/AEP for France and FGM for Spain.) Aspray-gun applied ‘gelcoat’ for phenolic composites. classifications respectively.

Can provide M1 and F1 fire and smoke

Ultrachrome 2000 Series A series of hard, acrylic urethane, in-mould coatings which can also be employed as a post-mould finish, of excellent weatherability. Ultrachrome 3000 Series A series of flexible aliphatic urethane, in-mould coatings of outstanding colour retention.

5775W90019 A white, high performance in-mould coating, formulated for spray application and providing a much longer ‘factory fresh’ appearance than gelcoats. Offers outstanding gloss retention with particular resistance to colour change, cracking and crazing.

IMPACT RTM 5788E90003 A grey low porosity primer based on a new proprietary polymer, designed to provide fast part production and toughness for elevated temperature RTM moulding, and giving a greatly enhanced surface profile. Will accept paints, enamels, lacquers, polyester and epoxy coatings/finishes.

I a;

1.27-1.30

1 bi

>55%

11 c i

2000-2400 11 di

11 ei

8-10/25

1

Cwstic Protec A proprietary, new generation, preaccelerated thixotropic in-mould coating for brush and spray application, setting new standards of colour stability, gloss, weather and water resistance. Available in a limited range of colours. Approved by Lloyd’s Registry. aj j i

b j Brush-68% c ; I Spray-64% j 9mg 11 k ; I f 61

1.1

I]

di

mi

e j Brush -9/25 i Spray- 7/25 11 n i 3 . 5 ~1 o~f

f

i i

g i 38

I

Pf

hi

141

ij

63OC

1r j

CR 3400 An in-mould, readily sandable epoxy system for use on female surfaces in a similar way to a traditional gelcoat, but requiring a finish suiace- painting treatment to overcome the UV yellowing of all epoxies.

96

- Cook Composites And Polymers C3

SMOOTHING COATS

As employed for phenolic resins.

N.B. FormK-BP Chemicals Limited

Cellobond FRP Colour Surface Pastes Designed to give a smooth, substantially pinhole free surface finish to mouldings direct from the mould, these materials are not inherently colour stable on exposure to UV radiation. They are primarily intended to be overcoated with a suitable paint system such as the fire retardant, low smoke system available from Trimite Ltd. The following colours are available: J261053L

Natural

J261059L

Light grey

J26106OL

Dark grey

J261061L

Black

N.B. Because a true commercial, fully pigmentable phenolic gelcoat is not available, Blagden Cellobond supply the following alternative. Cellobond FRP Colour Acrvlic Gelcoat A novel, patented system designed for use in conjunction with Cellobond FRP Colour phenolic resin systems for the manufacture of composites by conventional processes where a high degree of fire resistance is required. This gelcoat enables light-stable coloured components to be produced directly from the moulding process, but may also be used as a substrate for conventional low smoke emission paint systems. The gelcoat possesses excellent weathering and anti-graffiti performance without compromising the fire performance of the phenolic substrate. These gelcoats are available matched to RAL colours: GRxxxxS for FWL colours where xxxx = the four digit RAL code GSOOOI S for special colours where the four middle digits will refer to an incrementally increasing numerical list against which the gelcoat may be identified.

GP 5020 A grey-pigmented, typically brush applied, surface paste system comprising a thixotropic phenolic resin paste which is acid catalysed (GP 4835) to improve the surface finish of a phenolic laminate where a subsequent decorative paint finish is required. Other limited pigmentation is possible, and recommendations can be provided for spray-gun application.

C4

TOOLING, PRODUCT REPAIR & ASSOCIATED

945 Series A high gloss tooling gelcoat. For use with Stypol 040-2989. No further details provided.

97

Databook - C4 : Tooling, Product Repair & Associated

Ultratoolinq A gelcoat designed specifically for use in the manufacture of FRP mould tools. Exhibits high gloss, excellent abrasion and solvent resistance, with superior hardness and exceptional craze resistance.

I a!

1.08-1.2

]I bj

1 ci

2000-2600

11 di

1 e;

12-16/25

I

Ultra 7 - SP Sandable Contains a high level of NPG, and offering an ideal easy-to-sand s,urface for all secondary finishing operations, but also highly suitable for RTM manufacturing techniques.

I a]

1.08-1.38

11 bi

11 cI

2300-2900

11 di

I( e;

8-12/25

I

Tooling gelcoats are listed, the ‘normal’ grade is coded as G in France, but M in Spain, and with a ‘high temperature grade coded as SV in France, MV in Spain.

Within each series, as below, the following variants can apply : brush and spray application, standard or fast cure with varying gel time. No further details provided. 16 Series A fast sanding gelcoat for the manufacture of plugs. 30 Series A tooling gelcoat which provides ease of mould release, crack resistance and repairability.

Duratec Hi-Gloss Putty Available unpigmented (804-OOI),tooling black (802-001)and tooling orange (808-001)these easily sandable putties are high quality catalysed pastes designed to provide a strong repair material for FRP mould tools and components.

Duratec Surfacinq Primer A high quality polyester surface primer that provides outstanding filling and levelling properties, offering a rapid coat build-up for plugs and master mould surfacing. Adheres to epoxy resins and exhibits a heat distortion temperature of 150OC.

Durabuild Polvester Brushable Green Super Toolina Gel Coat c. 6000 e. 15/25 Durabuild Polvester Brushable Untinted Super Toolina Gel Coat c. 6000 e. 12-15/25

98

- Lilly Industries Inc Durabuild Super Toolina Gel Coat For spray application offering a super high-gloss finish with reduced subsurface porosity.

Durabuild Vinvl Ester Toolinq Gel Coat For spray application offering exceptional gloss retention, very low subsurface porosity, a high impact resistance and heat distortion temperature.

-

Fuli 101 Mould Gel Coat aj j i

11 b! 66-73% 11 c j 0.61-1.28 0.17% 11 k f >I20 11 I

11 d ; 1 mi

11 e! 4-13/25 1 f 11 n f >3% 11 0 :

15.5-24.5

11 gi II P i

45

hj

1i i

II q!

>IOO°C

ri

Shortly before going to press, the company was acquired by Reichhold Chemicals Inc. Changes to Jotun manufacturing units, name, distribution or other arrangements, and with regard to possible alterations in the respective resins supplied, have not been advised. Nomol GM A vinyl ester/isophthalic tooling gelcoat offering a high heat distortion temperature.

NOrRol GT An isophthalic based tooling gelcoat offering some chemical resistance and mild weather resistance. a!

j

/

100

1 bi 11 k j

11 c i 11 I

70

1 df 11 mi

I[ e!

1 nj

4.5%

11 f f 11 0 :

II si

11 hi

n 4;

Pi

1i

90%

1r j

Nom01 SP A high thixotropic, isophthalic/orthophthalic repair gelcoat offering mild weather resistance and available in different viscosity (GSF; HIS and GPE-S) as required by marine/pleasure, building/construction and transportation/communicationapplications.

Toolinq Gel Coat 5783690001 A black, conductive NPG/isophthalic filled, high-gloss durable gelcoat for mould tool manufacture.

I ai

1.08-1.2 11 bi 55%

11 c i

2400-2800

11 d f

11 ei

18-20/25

f

'i

11 gi

>35

I

99

Databook - C4 : Tooling, Product Repair 8, Associated

The company import the following Jotun Polymer (now Reichhold) tooling gelcoat as standard. Please see the appropriate section for description. GM

151 Series Tooling Available pigmented orange or black, and offering superior Barcol hardness, these tooling gelcoats offer extended glossy lustre and minimal mould preparation effort.

Cwstic IZPA A brush applied, thixotropic and preaccelerated, isophthalic/NPG tooling gelcoat. Available in a restricted range of colours.

GM-820 EX-I A vinyl ester tooling gelcoat offering excellent styrene resistance over many moulding cycles. M-820 EX-I Same comments as for GM-820 EX-I.

Viapal 9358 A highly thixotropic, preaccelerated resilient gelcoat for mould tool manu,dcture and resistan. to aromatic solvents. b. 66%. 935BE

C5

An enhanced storage version of 935B.

UNSATURATED POLYESTER BASED

Arruauuafd White Gelcoat A new ‘cleaner’ white, reduced styrene emission, sprayable only, gelcoat offering better UV performance and excellent weathering characteristics with excellent gloss retention.

100

- Cook CompositesAnd Porymers

APG 1725 A double promoted, low gloss gelcoat.

I af

1.25

bi

11 c i

2000-3000/25

11 d ]

11 e f

60-90/25

11 f i

u 91

1 h]

11 i f

204OC

1

11 e:

25-35/25

11 f i

u g!

11 hi

[i

204OC

I

APG 1750 A double promoted, high gloss, gel coat.

1 a!

1.40

1 bj

1 ci

2000-3000/25

1 dj

j

Beetle 8182 A white, pigmented, preaccelerated thixotropic isophthalic gelcoat of excellent opacity and specially formulated for application by brushing. For general purpose moulding of excellent weathering properties and approved for marine use by Lloyd's Register of shipping.

Beetle 8184 A preaccelerated, thixotropic, unfilled isophthalic gelcoat formulated for the production of reduced flammability ( Class 1 & 2 to BS 476. 1971) mouldings, and designed specifically for application by brushing. Offers excellent weathering properties and is recommended for use in construction and land transport applications. ai j f

1.25 16

11 bj 70% 11 ci "High" 11 d! 20 11 e f 20/20 11 f ! 1 k f 108 1 I ] 47 11 mi 3.9 11 n f 11 0 ;

11 gi

I

50

PI

1 hj 9% 11 i 62OC II q! 11 r i

Beetle 8287 A preaccelerated, high quality, resilient thixotropic gelcoat, of excellent weathering properties and specifically designed for application by spraying. Fully pigmentable and approved by Lloyd's Register of Shipping. ai

j

i

1.11 22

11 b J

55% 11 ci "Medium" 11 dj 18 el 11/20 k! 110 I] I 67 11 mi 3.1 11 n f

1f j

1 gi II Pi

1of

42

[ h j 7%

u qi

1i i

8OoC rf

Beetle 8288 A white pigmented, preaccelerated, thixotropic, isophthalic gelcoat of high quality, resilient and excellent weathering resistance and specifically designed for application by spraying. Of excellent opacity and approved for marine use by Lloyd's Register of Shipping.

Lovocor White Gelcoat 962-WA-196 A high performance isophthalidNPG gelcoat with a low volatile organic compound properties and Buffback high gloss characteristics. Very resistant to weathering and blistering.

1ai

1.38

11 bj

74.5%

11 c f

10,000-13,000cps

1 di

u ei

14-17/25

I

continued: 101

Databook - C5 :Unsaturated Polyester Based Cook Composites And Polymers - continued:

folvcor Coro-match PB-13 (943 Series) A range of isophthalic/NPG gelcoats formulated to offer water and certain chemical resistance, developed for marine and sanitary use but finding application wherever high performance is required. Can be applied by both airless and conventional spray equipment, but brush or roller application is not recommended. Available in a range of standard and custom colours. 943-W-016 is the standard white ISO/NPG gelcoat.

1 a!

1.08-1.32

11 b i

50-64%

Exact value depending on colour.

1 c!

9,000-19,OOOcps

I(

di

11 ei

11-16/25

I

folvcor Coro-match PB-14 (944 Series) High quality isophthalic gelcoats offering good chemical/water resistance, gloss retention, weatherability and resiliency, designed to meet the rigid requirements of transportation, boating and sanitaly applications. Formulated for both airless and conventional spray application brushing or rolling application is not recommended. Available in a range of standard and custom colours. 944-W-005 is the standard white I S 0 gelcoat.

-

I ai

1.08-1.32

1

b i 58-65%

Exact value depending on colour.

11 c !

11,000-19,500cps

11 d;

11 e;

IO-17/25

I

folvcor Metallic Gelcoats PB-46 Two series are supplied: 946’s

A standard isophthalic or iso/NPG base.

HPM’s A full flexible isophthaWNPG, offering more flexibility and better gloss than the 946 series.

I a:

1.08-1.32

11 b f

50-65%

11 c j

4,800-6,800cps

1 dj

1 ej

9-15/25

1

The metallic particles which are employed are smaller than typical metal flake, giving a subtle brilliance and elegant appearance. Metallic gelcoats are available in various colours but do not correspond in colour to standard gelcoats, for example 946-N-001 is not the same colour as 944-N-001. Stypol 40-4901 A clear, light-coloured, UV stabilised chemical resistant NPG-isophthalic gelcoat resin as used in the manufacture of all varieties of cultured marble, offering good sprayability and excellent thermal shock resistance on hot-cold water cycling.

Stvpol 40-4908 A clear, light-coloured, UV stabilised chemical resistant NPG-isophthalic gelcoat, as used in the manufacture of all varieties of cultured marble, offering high clarity, excellent colour retention and good sprayability.

StVROl 40-4917 A clear, light coloured, UV stabilised acrylic modified, chemical resistant NPG-isophthalic gelcoat resin, as used in the manufacture of all varieties-of cultured marble, offering high clarity; good sprayability, good colour retention and excellent dimensional stability during hot-cold water cycling.

102

- Fen0 (Holland) 6 V

The company manufactures under licence the full range of Cook Composites and Polymers, gelcoats.

Low voc A high performance low VOC gelcoat based on a new polymer resin, designed for application using airless spray equipment. Good weather and blister resistance and reduced shrinkage.

Ultraclear A clear, UV stabilised NPG/isophthalic gelcoat designed for application using airless spray equipment. Exhibits excellent scratch, stain and abrasion resistance. Especially suitable for marine application, and sanitary ware and cultured marble products.

I ai

11 bi

1.08-1.14

1 ci

1900-2100

11 d i

11 el

7-9/25

]

Ultraplus An NPG/isophthalic based gelcoat offering excellent weather resistance.

I ai

1.08-1.38

11 bi

1ci

2300-2900

11 dj

11 e!

8-12/25

I

Ultrashield A UV stabilised high NPG based gelcoat designed for application using airless spray equipment. Exhibits excellent chemical- and weather resistance.

I a;

1.08-1.38

11 bi

I ci

2300-2900

11 dj

11 e;

12-16/25

I

Impress PC

A fast curing gelcoat for SMC, available in a limited range of colours and also suitable for such components as sinks, baths, shower trays and industrial parts. Can be further painted with a top coat or PUR paint.

[ ai

1.1-1.2

11 b'i

11 c i

3000-4500

1

Ferro also list further grades for SMC, applicable to France and Spain, as below: France Spain

IPC

sv

IPC

NV

lsoaels I An isophthalic/polypropyleneglycol gelcoat available in a wide variety of colours offering excellent surface protection for external and marine application. The 'normal' grade is for brush application with the 'low viscosity' grade for spray. Approved by Lloyd's Registry. a f 1.15-1.3 j i 0.15%

IN NN

11 bi

1 ki

11 c i

10000-15000 1 d; 60-80 1 mf 3.0

1 Ii

11 e; 10-20/25 1 f f 1 n f 3-4% 11 o i

1 g;

I

Pi

30-40

1 hj II si

i i 70-80°C

1 ri

An alternative to lsogels I, with the following property differences: i. 6O-7O0C j. 0.17% 1. 50-70 m. 3.5 n. 2-3% An isophthaWNPG variant, again Lloyd's approved. Offers highest osmosis resistance. i. 80-90°C j. 0.12% m. 3.2 n. 2-3%

continued: 103

Databook - C5 :Unsaturated Polyester Based

Ferro (Holland) B V - continued: Low voc A high performance low VOC gelcoat based on a new polymer resin, designed for application using airless spray equipment. Good weather and blister resistance and reduced shrinkage.

S

-

These gelcoats for silk screen printing employed to obtain names, drawings or numbers on to a normal gelcoat surface - are available in different viscosity, thixotrophy and colour. Ferro also offer the following “gelcoats to manufacture GRP in-mould”, summary but with no further technical description.

1

FRANCE

SPAIN

NN

I Bodywork: Floors External Internal Artificial Marble Chemical Equipment Sanitary Ware Sink Units Swimming Pools

II

GIRA

SA

G G S S G G/A FA5095 S S/T S SIST SV HPlSV S SV S SIST HP S SIST

S

NN

I

GRS IR G I S A 0 ES G

CMC

I

NQ

NQ NV NQ NV NQ NV I NN NQ

Construction: Panels Chambers (RefrigJFood) Tanks Fire Res.: Intumescent MI M2

G GS S G GIA G/AEP S/AE S

SIA

SIRA

F SIAE GIAEP

I A0

G ES

A

S GFN

NF I IR

F FGM NF GFN

Food Contact: Liquids Solids

industrial:

* See also Ferro in-mould gelcoats for SMC mouldings.

104

A

S G

A0 IR ES

- Gwii Industries Inc

GL 102 Kara A fire retardant gelcoat satisfying the French approvals, M I (fire) and FO (smoke).

GL 111 Soma A fire retardant gelcoat satisfying the French approvals, M I (fire) and F1 (smoke).

GL 120 Dara A fire retardant gelcoat satisfying the French approvals, M I (fire) and F2 (smoke).

GL 132 Trina A fire retardant gelcoat satisfying the French approvals, M I (fire) and F3 (smoke).

GL 231 Ditra A fire retardant gelcoat satisfying the French approvals, M2 (fire) and F3 (smoke). ai

.. I i

1.44

11 bi 1 ki

73% 11 c i 300 37.6 11 I f 29

11 d f 11 mi

11 ei 11 ni

1f.i

0.48%

11 o i

I gi II Pi

49

11 hi

u st

11 i

83.2OC

1r i

Within each series, as below, the following variants can apply : brush and spray application, standard or fast cure with varying gel time. No further details provided. 16 Series A sanding gelcoat.

29 Series High performance, isophthalidNPG gelcoats for superior weather, water immersion and stain resistance. Canadian Standards Association (CSA) approved. 31 Series High quality isophthalic/NPG gelcoats suitable for most applications and designed for ease of application and repairability. 35 Series Flexibilised isophthalidNPG gelcoats, giving excellent weathering but not recommended for applications with continuous water contact. 45 Series A high quality isophthalic gelcoat suitable for most applications and Canadian Standards Association

approved. 50 Series Various gelcoat products for specialised application.

105

Dafabook - C5 :Unsaturated Polyester Based

1 HK RESEARCH I Distributed by PP-Com posites Ltd. G-I 175 Series A range of clear high molecular weight NPG-isophthalic gelcoats for use by the cultured marble industry with excellent resistance against staining, thermal shock cracking and premature ageing. a. 1.04 e. 9-12/25

ArOROl 5004 A UV stabilised gelcoat. ArOml 5023 A UV stabilised gelcoat, without wax.

i. 75OC

Aropol 6006 No details provided, other than, i. 75OC. Esfarez 514 P A fast cure gelcoat containing wax. i. 75OC Estarez 522 W Does not contain wax. No other details provided.

i. 7OoC

-

Fuli 102 Gel Coat

Fuli - 103 FR Gel Coat A fire retardant gelcoat.

Fuli - 202 Swav Gel Coat

Shortlv before noinn to press, the company was acquired by Reichhold Chemicals Inc. Changes to Jotun manufacturing units, name, distribution or other arrangements, and with regard to possible alterations in the respective resins supplied, have not been advised.

Norpol gelcoats are defined by letters which define the base resin, followed by a reference number as below: 30 50 pigment paste concentration 100 - 999 special products 1000 - 1999 test products 2000 - 9999 "Norpol" colour references 106

- Jotun Polymer AS The letters S and H respectively indicate whether suitable for spray or brush (hand) application. The former are typically supplied at a viscosity (c) of 9000-15000 with the latter at 14000-20000.The respective, typical gel times (e) are 8-20/23and 10-25/23. Norool CPG A low yellowing, isophthaliclNPG gelcoat offering excellent weather resistance, and available in different viscosity (GSF; H/S and GPE-S) as required for building/construction, marine/pleasure and transportationkommunications application. Approved for marine use by Det Norske Veritas, Lloyd's Register and Germanischer Lloyd's. af j i

77

11 bi 1 kf

11 c i 11 I i

70

11 dl 11 mi

11 e!

11 n!

2.5%

11 f ! 11 o!

II s!.:

6 -

11 hi II sf

11 i [

85OC

1 ri

Norpol GF A flexible, isophthalic/NPG gelcoat offering mild weather resistance, and available in different viscosity (GSF; H/S and GPE-S) as required for buildingkonstruction and transportation/communication application.

Norpol GP

An otthophthalic gelcoat primer of mild weather resistance and available in different viscosity (GSF; H/S and GPE-S) as required for building/construction and transpottation/communicationapplication.

Norpol GS A general purpose, isophthaliclNPG gelcoat offering mild weather resistance and available in different viscosity (GSF; HIS & GPE-S) as required for marinelpleasure, building/construction and transportation/communications application. Approved for marine use by Det Norske Veritas, Lloyd's Register, Bureau Veritas, Germanischer Lloyd's and Maritime Register of Shipping.

Norool NGA A high quality, general purpose, isophthalic/NPG gelcoat offering good weather resistance and available in different viscosity (GSF; HIS and GPE-S) as required for marine/pleasure, sanitary/cultured marble/swimming pool, building/construction, transpottationkommunications and chemical resistance applications. Approved for marine use by Det Norske Veritas, Lloyd's Register, Germanischer Lloyd's and Maritime Register of Shipping. Fire retardant versions also available.

NorRoi STL An LSE isophthalic/NPG gelcoat offering very good weather resistance, and available in different viscosity (GSF; HIS and GPE-S) as required for building/construction, marine/pleasure and transportation/communication application. Approved for marine use by Det Norske Veritas. ai j i

78

11 bj 11 k i

11 c i 11 I i

70

11 dj I] mi

11 e;

11 ni

3.5%

11 f i 11 o i

I

si Pi

1 hf

u si

11 i f

89OC

1r !

107

Databook - C5 :Unsaturated Polyester Based

TD.02 GC.IOO(H) A medium reactive, clear, standard, isophthalic gelcoat designed for application by brush. Approved by Lloyd’s Register of Shipping and listed by the UK Water Fittings Byelaws Scheme.

TD.03 GC.460(H) A medium reactive, standard white isophthalic gelcoat designed for application by brush. Approved by Lloyd’s Register of Shipping.

TD.25 Coloured Spray Gelcoat An accelerated medium reactive coloured isophthalic gelcoat designed for spray application and for particular use in the marine environment.

I ai

]I b j

56-60%

11 c ;

900-1300

(1 d;

20-26

1 ej

5-6/25

1

Distiqel 118 A chemically resistant, base, isophthalic gelcoat offering good colour stability, and good filler/pigment wettability.

Distiqel 3519A A UV stabilised, base, orthophthalic gelcoat offering good colour stability, and good filledpigment wettability.

Polvmar PMG 91H A clear, preaccelerated, general purpose thixotropic isophthalic/NPG gelcoat formulated for application by brush.

I a]

1.15-1.25

11 b i

40%

11 c ]

2800-3000

11 d i

c25

11 e;

10-15/25

Polvmar PMG 91s A version of PMG 91H for application by spray deposition.

I

c 2200 - 2500

Polvflex GR 200-11 A medium reactive, thixotropic general purpose orthophthalic gelcoat, tough enough to resist problems of crazing and cracking normal with brittle gelcoats.

108

- Norpol Polymer PTE Ltd Polvflex GR 200-17-1 A orthophthalate/NPG gelcoat recommended for marine, automotive and cultured marble application. a i 1.10 11 b j 68% 11 c i j i 0.7%/28 11 k! 105 (1 I i

1 dt 51

1 e ; IO-20/25 11 f i 11 n i 2.5% 11 o i

25

mi

11 gi

u Pi

42

11 hi

I

qi

11 i i 73oC 11 r i

Polvflex GR 200-18-1 A thixotropic isophthalic/NPG gelcoat, specially formulated and recommended for automotive, marine and cultured marble applications. Approved by .Lloyd's Registry. ai 1.22 11 b i 62% 11 c1 j I 60mg/7 11 ki 115 11 I

$8

11 di 11 mj

15

1 e ; 13-23/25 u f i 11 ni 2.5% 11 o i

1 gi 1I Pi

43

1 hi II 41

11 i

750~

1 ri

Polvflex GR 200-21 An easilv brushed thixotropic isophthalic gelcoat offering similar chemical resistance to laminate resin

Maxauard 29 A clear, user friendly, UV stabilised gelcoat, based on special acids and glycols offering excellent yellowing and weathering resistance in excess even of "Maxguard" 99, below. Available in white and colours, when some of the values quoted here may differ. ai .. J i

1.06

11 b i 11 ki

1 c j 3500 1 d! 11 I i 66 11 mi

112

11 e : 13-16/25 1 f j 1 n i 3.7% 1 o i

II s i . Pi

11 hj 2.0% 11 i i 82OC II 41 11 r i

Maxauard 99 A clear, user friendly, UV stabilised gelcoat offering excellent flexibility and osmotic blister resistance based on specially formulated resins. Available in white and colours, when some of the values quoted here may differ. ai .. li

1.04

]I

bi

11 k j

11 c J 3500 1 d1 1 I ; 73 11 mi

118

1 ei

13-16/25 4.1%

1 ni

11 f i 1 oi

I si Pi

11 hi

0.8%

u 41

1i

84OC

11 r i

Maxauard GN A high performance UV stabilised gelcoat offering excellent yellowing resistance, superior gloss retention and an optimum balance between frexural and tensile strength, elongation, heat distortion temperature and hardness. Approved for marine use by Lloyd's Register of Shipping, Det Norske Veritas, Bureau Veritas, Germanischer Lloyd and others.

The company import the following Jotun Polymer (now Reichhold) gelcoats, as standard: Other grades can be supplied depending on demand. Please see the appropriate section for gelcoat description. GP2000H1

GS

GX1 119H1

NGA

NGA 116S1

109

Databook - C5 :Unsaturated Polyester Based

Chromacoat A unique propriety Lloyd’s Register approved gelcoat, offering excellent spray characteristics, low pressure spraying, reduced emissions and an unlimited colour range.

I 0 1 Series Sanitary A high performance, orthophthalidNPG gelcoat exhibiting excellent gloss retention and durability for tub and shower applications. 101 Series High Quality Finish A high performance, flexible, acrylic modified gelcoat exhibiting superior gloss retention and durability in harsh outdoor environments. 105 Series Marine A high performance acrylic modified isophthalidNPG gelcoat exhibiting superior gloss retention and durability in harsh outdoor environments. Contains non-soluble fillers and additives that inhibit underwater blistering. 111 Series Polyrock - A Multi-coloured Acrylic Chip Filled A high performance 100% isophthalidNPG clear gelcoat base containing a variety of coloured chips duplicating the appearance of granite.

132 Series Transportation Developed to provide a cost effective utility grade gelcoat where ease of sanding, minimal porosity and flexibility are desired.

[

a!

1.26

11 b!

65%

I

150 Series Marble Clear A UV stabilised clear gelcoat offering excellent dimensional stability during thermal cycling. Available in preaccelerated, non-accelerated and low viscosity versions.

Crvstic 25PA A preaccelerated, brush applied, thixotropic, orthophthalic gelcoat suitable for internal applications and where the component is to be post painted. Available in a restricted range of colours.

ai

11

j j

1.1 bi 28mg 1 k !

j j

26mg

110

11 k j

11 c i 1 Ii

11 I

31

11 d i 11 mi

1 e] 11 n ]

5.5%

1f f 11 o f

66

11 mi

11 n j

4.9%

1 oj

10/25

11 gi II Pi

Pi

32

11 hf

I 41

4i

11 i f

38OC

11 r j

11 r ;

- Scott 5ader Company Ltd Crvsfic 48PA A preaccelerated, brush applied, thixotropic, filled, isophthalic flame retardant gelcoat for external use or general industrial application and offering good weathering properties. With Crystic 365PA, properly manufactured laminates can satisfy BS476 Part 1 and the Building Regulations 1985 (Section 6) for a Class 0 structure. Available in a restricted range of colours.

ai j j

1.4 11 bj 24mg 11 k i

11 c f 11 I i

59

11 dl 11 mi

15

11 el 1 nf

10/25 11 f 2.2% 11 o i

i

11 gi I PI

42

11 h f II q j

11 i

62OC

11 r f

Crvsfic 65PA A preaccelerated, brush applied, thixotropic, isopthalic flame retardant gelcoat for marine and external applications, offering excellent water resistance and weathering performance. Suitable when fully cured for low taint applications and approved (with suitable laminate resins) for the storage of potable water. With Crysfic 365PA, properly manufactured laminates can satisfy BS476 Part 1 and the Building Regulations 1985 (Section 6) for a Class 0 structure. Lloyd’s Registry and Det Norske Veritas approved. Available in a wide range of colours.

11

a! 1.11 b: 66% 18mg 11 k i

j i

1 cj 11 I j

d! 75

11 mi

e:

9/25

ni 3.0%

11 f ! 11 o i

11 gj

u Pi

42

]I hi II q !

11 i ; 75% 11 r !

Crvsfic 69PA A preaccelerated, brush applied, thixotropic, isophthalic/NPG gelcoat offering good chemical resistance and excellent water resistance, and suitable for sanitary ware and chemical plant structures. When backed with Crystic 397PA, approved by Wine Laboratories for the storage of potable spirits and wine. With Crystic 392, approved for the storage of potable water. Lloyd’s Registry and Det Norske Veritas approved. Available in a restricted range of colours.

Crvsfic 90PA A preaccelerated, spray applied, thixotropic, isophthalic flame retardant gelcoat, suitable for marine structures and external applications, offering good weather and water resistance. With Crysfic 365PA, properly manufactured laminates can satisfy BS476 Part 1 and ihe Building Regulations 1985 (Section B) for a Class 0 structure. Lloyd’s Registry and Det Norske Veritas approved. Available in a wide range of colours.

Crvsfic 91PA A faster curing version of Crysfic90PA. ai j i

1.1 11 b ( 56% 17mg 11 k l

11 c ( 1 Ii

di

57

11 mi

11 e; 1 ni

3/25 1.9%

11 f j 1 oi

11 g;

u Pf

42

1 hi II q i

11 i i 7OoC 11 r !

Crvsfic 92PA A preaccelerated, spray applied, thixotropic, isophthalidNPG gelcoat offering good chemical resistance and low taint in contact with foodstuffs. Lloyd’s Registry approved. Available in a restricted range of colours. ai j .i

1.1 1) bi 54% 16.4mg 11 k J

11 c i 11 I j

54.5

11 d j 11 mj

1 e:

6/25 n; 1.6%

11 f j

11 0 ;

gi 47

u Pi

11 h f

u 41

11 i f

940~

ri

Crvsfic 93PA A preaccelerated, spray applied, thixotropic, isophthalic, filled, flame retardant gelcoat for external and general industrial use. e. 12/25 i. 68OC

111

Databook - C5 :Unsaturated Polyester Based

G3253T

An unaccelerated, iso/NPG thixotropic gelcoat, approved by Lloyd's Register, without wax addition. Suitable for both brush and spray-gun application, although the latter is to be preferred to minimise pinholes. c. 40-65 e. 6 - 12/30 A pre-accelerated version.

G3253T-NC

Sirester CD 4 An unaccelerated, specially developed gelcoat resin offering excellent weatherability.

Sirester FG 0819 An unaccelerated, flexible orthophthalic, offering very high elongation and suitable for blending.

I ai

11 b j

11 c i

64%

450mPas

1 dl

15

)I e!

15/25

I

Sirester FSG 0820/X An unaccelerated, medium reactive UV stabilised, orthophthalic gelcoat, with antigrining properties.

Sirester FSG 0913 An unaccelerated, orthophthalic/NPG based gelcoat offering good chemical resistance. af

.. 1:

11 b i

65%

11 k !

11 c i 6OOmPas 11 d f 18 11 e f 11 I ! 70 ]I mj 4.1 11 n j

120

9/25 11 f i 2.0% 11 o f

5

I

1 g 1' P!

60

1 hf I si

1 i 90% 11 r i

Sirester ISG 0818 An unaccelerated, high reactive, isophthalic gelcoat.

ISG 0818/C

A variant of ISG 0818 offering a short gel time.

Sirester ISG 0839 An unaccelerated, high reactive, isophthaWNPG based gelcoat offering good weatherability.

Viapal 920B (Sl A highly thixotropic, preaccelerated isophthalic UV stabilised brushing gelcoat, approved by Lloyds. b. 65.5% 920 BE 920E

112

An enhanced storage version of 9208 (S). An unacceleratedversion of 920B (S).

- Vosschemie GmbH Viapal 921B A highly thixotropic, preaccelerated isophthalic gelcoat for spray application, approved by Lloyds. b. 57% 921BE 921E

An enhanced storage version of 921B. An unaccelerated version of 921B.

Viapal 922B A highly thixotropic, preaccelerated antimony trioxide. b. 69.5%

self-extinguishing HET-acid based brushing gelcoat

containing

Viapal 9308 A highly thixotropic, preaccelerated brushing, isophthalic/NPG gelcoat offering high chemical and warm water resistance, such as required for swimming pools and sanitary ware. b. 60% 930 BE

An enhanced storage version of 9308.

Viapal 931B A highly thixotropic, preaccelerated isophthaWNPG gelcoat for spray application, offering high chemical and warm water resistance, such as required for swimming pools and sanitary ware. b. 51% 931BE

An enhanced storage version of 9318.

Viaroal 9358 A highly thixotropic, preaccelerated resilient gelcoat offering high resistance to aromatic solvents. b. 66% 935BE

An enhanced storage version of 9358.

Viapal 4624B A very highly thixotropic, preaccelerated resilient isophthalic brushing gelcoat offering enhanced impact strength with outstanding sea-water resistance. b. 61% Viapal 46348 A highly thixotropic, preaccelerated self-extinguishing isophthalic brushing gelcoat, recommended for use with Viapal N 612A or Viapal N 660, or their enhanced storage life versions. b. 74% 4634BE

An enhanced storage version of 46348.

Viapal 4647BS A thixotropic, preaccelerated, UV stabilised isophthalidNPG gelcoat for spray application, offering very good resistance to water and chemicals at elevated temperature with an extraordinary bright colour making it suitable for the manufacture of sanitary ware, synthetic marble/onyx tiles. b. 52.5% 4647BES

An enhanced storage version of 464788.

In addition to the following the company can also supply a selected range of gelcoats as manufactured by Jotun (now Reichhold). Viscovoss G 311 SB A cobalt accelerated, UV stabilised gelcoat with an extremely high elongation at break, high impact and scratch resistance. Available clear and white, as well as in a select range of F!AL colours. Viscovoss G 327 SB A cobalt accelerated, UV stabilised isophthalic acid gelcoat, for user pigmentation.

113

Databook - C6 :Urethane Based

C6 URETHANE BASED

Ultrachrome 4000 Series A two-component aliphatic urethane gelcoat (or in-mould coating) designed to be employed with FRP laminates as a premium grade replacement for conventional and NPG polyester gelcoats. Exhibits outstanding gloss and colour retention, while resisting chalking, cracking and crazing. The recommended thickness is 5-20mils. UC4005 e. 45-50/25, although this can be reduced. (A new version of 4005 is understood to be available, designated 35030)

114

MATRIX RESINS FOR LAMINATING & ASSOCIATED PURPOSES Page

D1

ACRYLIC BASED Ashland Chemical Company

D2

BlSMALElMlDE BASED Cytec Aerospace Ltd Fiberite Inc (see note prior to resin descriptions)

D3

119

120

BISPHENOL-A, EPOXIDE, VINYL & CYANATE ESTERS AND FUMARIC BASED Adtech Corporation Akemi Inc Alpha/Owens Corning Ashland Chemical Company Ashland Chemical Hispania Borden Chemical UK Ltd Bryte Technologies Inc Ciba Specialty Chemicals Cytec Aerospace Limited Dow Chemical Company DSM-BASF Structural Resins Fibercote Industries Inc Fiberite Inc (see note prior to resin descriptions) Gwil Industries Inc Huntsman Chemical Company Australia Ltd Jiangyin Crabec Synthetic Chemicals Co Ltd Jotun Polymer AS (See note prior to resin descriptions) Lonza SPA McWhorter Technologies Naptha Resins & Chemicals Private Ltd Reichhold Chemicals Inc Resin Services Inc Robnor Resins Shell Chemical Company Showa Highpolymer Co Ltd Singapore Highpolymer Chemical Products Pte Ltd SIR Industriale SP Systems LPd Swancor Industrial Corporation Vianova Resins AG Vosschemie GmbH

121 122 124 125 127 128 129 130 131 133 134 135 136 137 138 139 140 141 142 143 144

See over for D4 to D8

115

D4

HYBRID SYSTEMS Ashland Chemical Company Scott Bader Company Ltd Vianova Resins AG

D5

PHENOLIC BASED Blagden Cellobond Limited Borden Chemical UK Ltd Fibercote Industries Inc Fiberite Inc (See note prior to resin descriptions) Georgia-Pacific Resins Inc Hepworth Minerals & Chemicals Ltd

D6

148 150 151

151

UNSATURATED POLYESTER BASED Adtech Corporation Akemi Inc Alpha/Owens-Corning Ashland Chemical Company Ashland Chemical Hispania BIP Ltd Blagden Manufactured Chemicals Cook Composites and Polymers Cray Valley DSMeBASF Structural Resins Dulux Australia Fibercote Industries Inc Fiberite Inc (See note prior to resin descriptions) Gwil Industries Inc Huntsman Chemical Company Australia Ltd Interplastic Corporation Jiangyin Crabec Synthetic Chemicals Co Ltd Jotun Polymer AS (See note prior to resin descriptions)l82 Lonza SpA Marubeni Specialty Chemicals Inc McWhorter Technologies Naptha Resins & Chemicals Private Ltd Neste Chemicals Norpol Polymer Pte Ltd PP Composites Ltd Reichhold Chemicals Inc Resinous Chemicals Ltd Resin Services Inc Resisa

116

147

FURANE BASED Ashland Chemical Company

D8

145 146

POLYURETHANE BASED, CASTING & RIM/RRIM/SRIM RESINS Bayer Corporation Ciba Specialty Chemicals (UK) Ltd Futura Coatin@ Inc Miles Inc Robnor Resins

D7

144

151 152 154 157 161 165 167 168 173 177 178 181 183 185 186 199 202 203 204 205 208 209 212 214

Scott Bader Company Ltd Singapore Highpolymer Chemical Products Pte Ltd Sirca SPA SIR lndustriale Vianova Resins AG Vosschemie GmbH

220 224 225 227 232 234

117

- Ashland Chemical Company Limited D1

ACRYLIC BASED

Modar 814 Specially designed resin when filled with hydrated fillers to achieve a Class 1 low smoke (and low toxicity) flame retardant condition for mouldings fabricated by RTM, hand-lay, spray/projection and filament winding. Also suitable for applications requiring USDA approval.

Modar 815 An unaccelerated, low viscosity halogen-free modified acrylic for hand-lay, spray/projection, RTM and filament-winding mouldings requiring very low smoke and good fire performance (Class 1, ASTM E-84, e25 flame spread, with alumina trihydrate addition).

Modar 816 A unaccelerated, modified acrylic which combines fast hand-lay, spray/projection, RTM or cold-press moulding with good part appearance and toughness. Aluminium trihydrate additions provide flame retardancy at low smoke.

Modar 824LTS A modified, non-shrink, low profile acrylic resin formulated for the production of parts with a high quality surface finish, by RTM or cold-press moulding. Class “A” can be obtained with electroformed nickel tools.

Modar 826HT A low profile, non-shrink system, suitable for pultrusion applications and offering optimum surface finish and fire retardancy with low-smoke, low flame properties. Modar 835ACS A low viscosity, fast cure, modified acrylic resin for RTM and cold-press moulding application.

ai . . 1.08 1 bi

11 ki

J i

1 cl 78 11 di 117.2 11 I I 62 mi

1 ej 7 -10/25 1 f i II si 11 hi 2.7 11 n i 7% 1 01 166.9 11 pi 105.5 11 qi

[ii

5.8

1r j

2.1%

Modar 839 A fast cure, low viscosity resin designed for RTM application offering high impact resistance. a. .f Ii

1.02

11 bi 11 ki

41.3

1ci 11 I

105 1 dj 23.4 11 mj

I] 1.0

1f i u si 11 0: 143 1 p.i

ei 9 -12/25

1 nf

54%

96.5

1 hi 1 qi

4.8

1i i 1 ri

5OoC 1.75%

Modar 865 A tough, low viscosity, modified acrylic formulated to provide an optimum balance of high reactivity, excellent mechanical performance with good chemical resistance. Suitable for RTM, cold-warm press moulding, pultrusion and filament winding.

119

Databook - Section 02 :Bismalemide Based

D2

BlSMALElMlDE BASED

At the time of going to press the future of this company remains unsure, although likely on the latest evidence to be acquired by Cytec Industries Inc. of West Paterson, NJ, USA, and to be called Cytec Fiberite Inc. Hence known contact addresses for both Fiberite and Cytec Industries Inc have been included in the Directory sectiorl. 986 =8O0C cure bismaleimide resin with a service temperature of 205-218OC dry and 150-163OC, wet. Typically supplied as a prepreg using tape, fabric and roving. For the manufacture of high temperature structural aircraft parts, including jet engine thrust reversers. a. 1.22 Tg 285OC

D3

BISPHENOL-A, EPOXIDE, VINYL & CYANATE ESTERS, AND FUMARIC BASED

EL-301 A room temperature cure unfilled epoxy for laminating, offering maximum wet-out, low viscosity, low odour and high mechanical and physical properties. a. 1.10 c. 1,000-2,000cps k. 291 I. 274 EL-301 LP

Offers a longel' working life than EL-301

EL-302 A room temperature cure, filled epoxy offering excellent handling characteristics, high strength and dimensional stability. Ideal for wet-lay processes. a. 1.35 c. 3,000-5,000cps k. 245 I. 182 EL-302PC An improved wet-out version. EL-302PC-LP Also offers a longer work life. EL-318 An unfilled, room temperature cure, flame retardant epoxy meeting FAR 25.853(a) standards. EL-326 An unfilled epoxy for laminating allowing a constant temperature use of 16OOC and intermittent up to 191OC. EL-326-1

Provides a longer working time than EL-326 (60-70mins compared to 45-55mins.)

EL-326-2

Provides a lot longer working time than EL-326-1 (240-270 mins.)

120

- AlphdOwens Corning

AL 2103 A white pigmented, epoxy laminating resin, available in two viscosities (3,000-3,500cps and 2,OOOcps) and with respective pot-lives of 20-30 and 50-60 mins. Respective cures Q 25OC are 8-12 and 24-48 hours. k. 76 I. 50 m. 4.8 (typical) AL2108 A clear, unfilled, epoxy laminating resin.

a ! 1.15

i..

11 b ]

11 c !

l

11 di

1500-25OOcps

11 o i

l n!

I

II q f

Pi

1 ri

HvdroPel A 15.604 A preaccelerated, ‘high solids’, thixotropic, low profile, modified vinyl ester DCPD laminating resin designed for room temperature cure, offering rapid wet-out and excellent mechnical properties. Specifically designed for marine use as a ‘skin-coat’ to resist blistering and gelcoat cracking. a! 1.10

..

11 b ]

li

65% 11 c! 131 11 I

11 k j

i

625 69

11 d ! 11 mi

3.7

11 e! 11 nj

14/25 1 f 2.5% ! o f

Hydropel A-35115.654 A low monomer version of A 15.604.

i

1 gt

40

u P!

c. 525

11 h! II 4 f

1i !

]I

9g0C r!

e. 18/25

Hvdrooel E-010 Series Tough, versatile, bisphenol-A epoxy based vinyl ester resins dissolved in styrene offering outstanding mechanical properties and excellent resistance to cracking, crazing, chemicals and heat, for use in hand-lay, spray/projection lamination, filament winding and pultrusion. Available in standard and low monomer versions and for example:

E-010-01

11 b!

1

11 1

11

11

60% cf 400 d! 4 0 e! 15/25’ fi 150 I ! 100 rn] 3.4 n! 4.9% 0: ’ Many accelerator/catalyst combinationsare viable see manufacturersliterature.

a ! 1.069

..

Ji

E-010-06 ai 1.098

I

11 k f

11

11

11

-

11

11

1

I]

b! 70% cj 3000 d! 4 0 ei 13/25* Many accelerator/catalyst combinationsare viable - see manufacturersliterature.

11 g!

I PI

35

11 h i

I

11 i f 41

107OC

11 r !

I

E-010-TB & E-010-TC (Hydropel VE) These are accelerated and thixotropic versions of E-010-01.

I a/

1.05

11 b :

TB: e. 15/25

56%

11 c i

350

TC: e. 25/25

continued: 121

Databook - Section 0 3 :Bisphenol- A, Epoxide, Vinyl & Cyanate Esters & Fumaric Based

Alphalowens Corning - continued: HvdroPe/ E-015-HC (HydropelB B) An accelerated, thixotropic, isophthalic modified vinyl ester corrosion resistant resin, designed for use in marine applications such as boat hulls. Offers increased protection against osmotic gelcoat blistering. Can be employed for the first ‘skin’ or ‘cladding laminate’ applied directly to the gelcoat, prior to application of the structural laminate, or alternatively as the structural laminate.

N.B. Other versions - DB, DD & DF - exist.

E-085 Series Vinyl ester epoxy novalac resins, only available unaccelerated and non-thixotropic, but in standard and low monomer versions. For chemical tanks, small and large diameter pipe, fume handling equipment and for example in the protection of equipment for use in desulphurisation plant. Upper temperature range in liquids 102OC and 107OC in vapours. K298FR An unaccelerated member of a new family of non-thixotropic flame retardant bisphenold designed for applications with a need to combine flame retardance with resistance to corrosive environments, such as n. 3.6% required for scrubbers. Suitable for hand-lay and filament-winding. i. 110°C A preaccelerated version of K298FR.

K299FR

j

i

1.0%/4

1 kj

130

11 I f

85

1 mf

3.8

11 n f 2.6% 11 o f

Pi

qi

ri

AME 5000 A high-solids, thixotropic, low VOC, modified epoxy for the construction of marine laminates where low shrink, excellent wet-out, improved strength, impact and blister resistance are required.

Arotech 9000 A high performance vinyl ester designed for marine applications. Hetron 700 An unaccelerated, low viscosity, non-thixotropic, bisphenol-A fumarate polyester offering excellent heat and corrosion resistance particularly to highly alkaline and hypochlorite environments, suitable for hand-lay and filament winding in the manufacture of tanks, pipes, pumps, flooring, stacks and scrubbers. Also suitable for flake glass, linings, coatings and monolithic toppings.

700G

122

A solid, ground version of 700.

- Ashland Chemical Company 700RT

A RTM version of 700.

Hetron 922 An unaccelerated, low viscosity vinyl ester offering excellent corrosion and impact strength with high tensile elongation. Approved for contact with food stuffs under FDA Title 21 CFR 177.2420 and suitable for handlay, spray/projection lamination and filament winding. Can also be employed for flake glass, filled linings and coating compounds. (Hefron 980 is recommended where higher operating temperature or greater resistance to organic solvents and aggressive aqueous conditions is required.)

922L

A lower viscosity, unaccelerated version.

922L-25

An accelerated version of 922L.

922/35

An unaccelerated version, with a higher solids content.

FR922

A flame retardant version.

a! 1.16

..

J i

11 bi

60% 11 c f 145 11 I

11 k’;

i

425 90

11 di 11 mi

3.5

11 e f 20-30/25 u f i 11 n! 4.6% oi

1 gi II Pi

35

I hi nqi

1i !

108OC

A ri

Hetron 970/35 An unaccelerated, low viscosity, highly cross-linked novolac epoxy vinyl ester offering superior oxidation resistance, excellent solvent and acid resistance and suitable for hand-lay, spray/projection lamination and for flake glass, filled linings and coating compounds. Hetron 980 and 980/35 are recommended when increased toughness is required at less critical operating temperatures.)

Hetron 980 An unaccelerated, low viscosity, highly cross-linked vinyl ester resin offering good caustic resistance, excellent heat, solvent , acid and impact resistance, and suitable for hand-lay, spray/projection lamination and for flake glass, filled linings and coating compounds.

A low styrene content version, with a higher heat distortion temperature. Can be used in both acidic and alkaline environments and suitable for hand-lay, spray/projection deposition and filament winding. Meets Southern California’s South Coast Air Quality Management District Rule 1162 and the State Guideline for polyester fabrication. 980/35

continued: 123

Databook - Section 03 : Bisphenol- A, Epoxide, Viny/ & Cyanate Esters & Fumaric Based

Ashland Chemical Company - continued: Hetron FR 99OZX An unaccelerated, low viscosity, styrene free, corrosion resistant (to acidic and alkaline environments), flame retardant ( ~ 2 ASTM 5 E-84 with 3% antimony trioxide) vinyl ester, offering high strength, excellent impact strength and toughness, designed to bond Hetron FR 992 resin laminates and meet the low odour requirements of the semiconductor and other industries. Since this resin does not contain styrene, the glass reinforcement must exhibit very little binder; conventional CSM's do not wet-out well with this resin.

992

A hand-lay, spray/projection lamination version of 992RT

Formerly Sier SA

- Sociedad ltalo Espanola De Resinas S A

AC-8982 An unaccelerated bisphenol based resin of good mechanical properties and chemical resistance.

ERoRhen EL-5 A bisphenol-A epoxy suitable for potable water contact, in for example the manufacture of filament . - system, wound pipes. Also suitable for laminates demanding high impact resistance. a. 1.16 c. 9 - 17Pa.s Epophen EL-62 An bisphenol-A/bisphenoI-F epoxy system, suitable for potable water contact, in for example the c. 6 - 8Pa.s manufacture of filament wound pipes. a. 1 .I 7 ERoRhen ET-SA A thixotropic pigmented bisphenol-A based epoxy containing inorganic fillers for use with epoxy catalysts in

coatings, castings and adhesive manufacture. a. 1.2 Epophen Hardener EHA-77 A modified cycloaliphatic polyamine curing agent for epoxy resins for filament winding.

124

- Sryte Technologieslnc ERoRhen Hardener EHT-86 A modified cycloaliphatic polyamine curingagent for epoxy laminating and casting resins. Features include resistance to water spotting, good low temperature cure and chemical resistance.

ERoRhen Hardener EHT-88 A modified cycloaliphatic polyamine curing agent for epoxy laminating and casting resins. Features include resistance to water spotting, good low temperature cure and chemical resistance.

The following Epophen liquid epoxy resins and hardeners are also listed in literature. Those marked + are available to special order only. The Epophen range of epoxy resins and hardeners are widely used as raw materials by specialist formulators. ERORhen Resins GRADE

TYPE

VlSCOSlTY (Pa.sI25OC) + EL17* ........................BisI!...................................................................................................................................................................................... henol-A None 1.16 12 - 14 Bisphenol-A Cardura E10 (Reactive) 1.13 1.4 - 2.2 .......................................................................................................................................................................................................................................... EL23 Bisphenol-A Alkyl glycidyl ether (Reactive) 1.15 1.1 - 1.6 ..................................................................................................................................................................................................................................... + EL24 Bisphenol-A Cresyl glycidyl ether (Reactive) 1.15 - 1.1 0.7 .................................................................................................................................................................................................................................... EL65 Solid Bisphenol-A Solvented (75% solids in xylene) 1.1 5 15 ......................................................................................................................................................................................................................................... Bisphenol-NBisphenoI-F Reactive/Non reactive blend 1.13 0.1 -0.5 ............................................................................................................................................................................................................... EL68 Alkyl glycidyl ether (Reactive) Bisphenol-NBisphenoI-F 1.15 0.7 - 1.2 * Thixotropic version also available.

EaoDhen Hardeners

I

1

GRADE

....................................

I

TYPE

DILUENT

I

S.G

I

VISCOSITY (Pa.s/25OC)

1

1

1 1

1

I

1 I

1

MIX RATIO (R:H)

S.G

I

TIMGEL E/25OC

I

I

1I

I

APPLICATION EXAMPLES

1

olymercaptan formulations .P ...............................................................................................................................................................................................................

Filament winding, laminating & casting. High HDT. ............................................................................................................................................................................................................................................................ EHL3 Polyamidoamine 0.95 0.2 - 0.5 1 : 0.65 3 - 4 hrs Castings, encapsulation & adhesives .............................................................................................................................. ......................................................................................................................... 12.5 - 1 4 - 6 hrs Structural adhesives Polyamide 0.97 1:l EHL4 ............................................................................................................................................................................................................................................................. EHLl5 Aliphatic polyamide 0.98 1.0 1.5 1 : 0.5 2 3 hrs Sealants & putties ......................................................................................................................................................................................................................................................... 2.5 - 3.5 hrs Adhesives, sealants & Polyamide 1.0 Thixotropic 1: 1 EHL17 EHA77

I

Cycloaliphatic amine

0.93

0.01 -0.02

1 : 0.23

1

2 - 3 hrs

1

.............................................................................................................................................................................................. EHT86 Modified 1.07 0.3-0.6 1 : 0.65 1 - 2 hrs polysulphide/cyclo-

..................................... Good impact & chemical

aliphatic amine resistance ............................................................................................................................................................................................................................................................ EHT88

Modified polysulphidelcycloaliphatic amine

1.07

Thixotropic

1: 0.75

30 mins

Gelcoats & adhesives

BT250E-1 A 121OC curing, low to medium service temperature epoxy displaying good toughness and strength, and offering an outstanding surface finish with lower case vacuum bag/oven cure. The system is MIL-R-9300 approved and is self-adhesive to honeycombs and foam cores. 0. 483 p. 427 q. 21 BT250E-2

A controlled flow version of BT250E-1.

continued: 125

Databook - Section 0 3 :Bisphenol- A, Epoxide, Vinyl & Cyanate Esters & Fumaric Based

Bryte Technologies Inc - continued: BT350E-1 A high performance, 177OC curing, easily processed (autoclave, press, compression or vacuum bag), epoxy. Suitable for primary structures, heat affected secondary structures, space applications, reflectors, high performance sporting goods and structural hardware for racing vehicles. BT350EX-A A modified epoxy specially developed for structural microwave and high performance radar absorbing applications. Suitable for ‘D’, ‘E’ and ‘S’ glass, aramid and quartz reinforcements. 0. 427 p. 255 g. 34 BTQ-1 A 177OC cure cyanate ester for many aerospace applications offering a 26OOC short term service temperature. Tg 27OOC

1 oi

593

]I pi

483

11 q j

21

1 rj

1

7781 ‘E’ glass reinforcement.

BTCy-1A

A toughened version of BTCy-1, increasing its use as a high performance resin system, to a. 1.15 that of an accompanying resin system for film adhesives. Tg 246OC

BTCV-2 A 177OC cure cyanate ester for many aerospace applications offering a 182OC short term service temperature. Tg 191OC

10;

607

11 p j

490

11 q j

20

11 r i

7781 ‘E’ glass reinforcement

BTCV-3 A 121OC cure cyanate ester for many aerospace applications offering a 163OC short term service temperature after a 177OC post cure. Tg 143OC after 121OC cure.

I 0:

558

1 p i.

469

11 q j

21

11 r i

7781 ‘E’ glass reinforcement

EX-1505 A 177OC non-MDA cure, cyanate ester resin formulated for use in specific applications where high service temperatures will be encountered. Due to its high Tg (316OC after 26OOC free standing) the system is a viable option for BMI and polyimide replacement. j. 1.4% @ saturation. a. 1.25 EX-1509 A 177OC non-MDA cure, cyanate ester resin with a V-0 flammability rating, formulated for use in specific applications where high service temperatures will be encountered. Due to its high Tg (335OC after 275OC free standing) the system is a viable option for BMI and polyimide replacement. a. 1.25 j. 1.5% @ saturation. EX-1510 A highly modified, tough cyanate ester of low, viscosity, for RTM moulding (particularly of large structures), offering excellent mechanical and thermal properties in addition to low moisture absorption. Tg (Post cured) 26OOC (Dry).

EX-1515 A 107OC - 121OC cure toughened cyanate ester offering high radiation resistance and low moisture absorption/low outgassing while retaining excellent toughness and a low 118OC stress free temperature. Also resists microcracking even when subjected to vicious thermal cycling and high levels of radiation exposure. a. 1.I 7 Tg 134°C cured @ 121OC; 182OC post cured @ 177%. 126

- Ciba Speciaky Chemicals EX-1515-1

9 A cure toughened cyanate ester, liquid version of EX-1515. a. 1.I

EX-1522 A highly modified, toughened low viscosity epoxy offering excellent mechanical and thermal properties in addition to a very low moisture absorption and a flammability rating of V-0. Suitable for radomes, antennae and other critical electrical applications. Allows self adhesion under vacuum or pressure cure, to honeycomb without the use of a film adhesive, and displays cohesive honeycomb failure during destructive testing. k. 156 m. 3 a. 1.47 j. 1.2% at saturation after 100 hour boil. EX-1530 A cyanate resin system, utilising non-MDA curing agents, for high service temperature applications, and due to its high Tg (310% after 260% free standing post cure), a viable option for BMI and polyimide replacement. The low moisture absorption characteristics allows it to excel in critical hot/wet conditions. a. 1.2 j. 1.2% at saturation. EX-1531 For use in the manufacture of high production/performance epoxy prepreg and allied needs, but allowing a reduction in the cure cycle from typically 60 to 90 minutes to 15 to 20 minutes at between 113 121%. Has gel time and flow characteristics similar to standard epoxies.

-

EX-1531A

A toughened, longer cure time (20 - 25 minutes) variant.

EX-1532 A cyanate resin system, utilising non-MDA curing agents for high service temperature applications, and due

-

to its high Tg (315OC after 26OOC free standing post cure), a viable option for BMI and polyimide replacement. The low moisture absorption characteristics ,allows it to excel in critical hornet conditions. a. 1.25 j. 1.4% at saturation. EX-1538 A highly modified, toughened low viscosity epoxy offering excellent mechanical and thermal properties in addition to a very low moisture absorption.-Suitable for RTM and filament winding. m. 3 a. 1.25 j. 1.2% at saturation after 100 hour boil. k. 131 EX-1539 A general purpose epoxy offering excellent mechanical performance and a V-0 flammability rating and self0. 545 p. 443 q. 24 adhesive to honeycomb and foam cores. a. 1.45 EX-1545 A highly modified, tough cyanate ester of low viscosity, for RTM moulding (particularly of large structures), offering excellent mechanical and thermal properties in addition to low moisture absorption. Tg (177OC) 174%.

EX-1547 For use in the manufacture of high production/performance epoxy prepreg and allied needs, but allowing a reduction in the cure cycle from typically 60 to 90 minutes to 15 to 20 minutes at between 113 121%. Has gel time and flow characteristics similar to standard epoxies.

-

Araldife 501 (Previously known as Redux 501) A room temperature curing epoxy offering temperature resistance up to 120"C. . . 1.2

a;

11 b;

1 kf

11 cl 11 I f

2.5Pas

11 dj 11 mf

11 ei nf

90/23 1 f i 11 oi 530

N.B. Mechanical properties are for a glass fabric - no other details provided.

N pi 11 pi

320

1 hi 1 qi

22

1 ri

continued: 127

Databook - Section 0 3 :Bisphenol - A, Epoxide, Vinyl & Cyanate Esters & Fumaric Based Ciba Specialty Chemicals - continued: Epicast 50N946 A quick setting resin for small repairs, with a choice of hardener, 9449 and 9816. Self extinguishing.

)I b i

1 ci

II g i 11 el 15-20/23 11 f 1 di 11 o f 310 11 p i 11 ni 11 mi N.B. Mechanicalproperties are for a glass fabric - no other details provided. ai 1.25 .

I

J i

11 ki

3.5Pas

240

11 hi 11 q i

17

11 i i 11 r i

Epicast 52NB Offers excellent hot/wet properties.

I ai

1.1

1 cj

1 bi

4~as

1 el

11 dj

60/23

I

Cycom 823 RTM A one part, low viscosity epoxy resin for resin transfer moulding or resin infusion, if necessary at room temperature.

1 bi

1 ci

11

11

11

II si

ei 15/125 or 271100 f j 2 5 0 ~ ~ 1 2 5 d; II Pi 1 oi 11 mj 3.4 ni Ii 144.3 The manufacturer can provide a comprehensivedatapack regarding curing details and mechanical properties. aj ..

11 k i

11

11

1 h/ II si

ii

11 r i

Derakane 411 Series A bisphenol-A, epoxy resin.

c. 2OOOcps

a. 1.073

411-35 411C-50

411-45

411-50

a. 1.03

c. 35Ocps

411-3501411-350PA

a. 1.045

c. 35Ocps

Derakane 441-400 Best described as being between Derakane 411 epoxy vinyl ester and Derakane 470 epoxy vinyl ester in light of its physical properies and corrosion-resistance performance.

Derakane 470 Series A novolak epoxy resin 470-301470-308

11 b f

11

11

dj c i 480mPa.s 70% 3.7 mi 68 j I 125 J i S = Extendedstorage life a i 1.09

..

128

11 k j

1

11

11 ej 11 n j

I i

f 20-40/25 3-4% 0 ;

11

11 g j I PI

40

11 hi

u si

Ii

15OOC

ri

- DSMdASF Structural Resins

S = Extended storage life

a. 1.048 a. 1.08 a. 1.11

470-45 470-300 470-2000

c. 1OOcps c. 3OOcps c. 200Ocps

Derakane 510 Series A brominated, bisphenol-A epoxy resin, offering a high degree of fire retardance whilst maintaining chemical resistance.. 51OA-40

ai 1.23

..

51ON ai 1.16

..

11 b i

11 k ! 1 bj

Ji

11 c i 350mPa.s 11 di 11 ei 124 11 I i 73 11 mi 3.5 1 n f

60%

62% 11 c f 250rnPa.s 11 dj 138 1 I i 76 11 mi 3.6

11 k j

a. 1.18 a. 1.14 a. 1.17

51OB-700PAT 51OC-350 51OC-I 500

11 e: 11 n!

20-40/25 5%

11 f j

40

1 hi II si

1 i i IOOC 1ri

40

1 hi I qI

11 i j 120% 11 r !

II Pi

1 oj

20-40/25 3-4% 1 oi

11 g!

11 f i

11 gi

II PI

c. 7OOcps c. 35Ocps c. 15OOcps

Derakane 8084 Series An elastomer modified epoxy vinyl ester that expands the serviceability of thermoset resins in traditional FRP applications. a j 1.02

..

11 bi

li

60%

1kf

I]

135

ci

11 d f I] e! 11 mi 3.2 11 ni

350mPa.s

11 I i

75-80

20-40/25

8%

u oj

1f f 194

11 gi 1 p:i

30-35 198

1 hi 1 qi

7.8

11 i 1 80-90Oc 11 r

Atlac 382 (Formerly 382-05 & 382-05D) A standard bisphenol A resin. 382 A

(Formerly 382-05 AD & 382-05 A)

382 HV

(Formerly 382/2) A high viscous variant of 382.

382 T

(Formerly 382-05 D TIXO)

382 POWDER (Formerly 382 E) 382 FLAKES

(Formerly 382 A)

The amine accelerated version of 382.

A thixotropic variant of 382.

A monomer free variant of 382 in powder form. A monomer free variant of 382 in flake form.

Atlac 387 A flexible, monomer free bisphenol A resin. Atlac 580

(Formerly 580-05) A vinyl ester urethane resin.

580 ACT

(Formerly 580-05 ACT 20 & 580-05 BH) An amine and cobalt accelerated, and thixotropic variant of 580.

Atlac 581

(Formerly 58016) A flexible vinyl ester urethane resin having a tensile elongation of 6%.

Atlac 582 continued:

(Formerly 580/10) A flexible vinyl ester urethane resin having a tensile elongation of 10%. 129

Databook - Section 0 3 :Bisphenol- A, Epoxide, Vinyl & Cyanate Esters & Fumaric Based

DSMoBASF Structural Resins - continued:

Atlac 583

(Formerly 580/15) A flexible vinyl ester urethane resin having a tensile elongation of 15%.

Atlac 590

A epoxy novolak resin

590 HV

(Formerly 590130) A high viscous variant of 590.

Atlac 3515

(Formerly 35-15 & 35-15 D)

3515 A

(Formerly 35-15 A & 35-15 AD) The amine accelerated version of 3515.

Atlac 4010

(Formerly 40-10 & 40-IOD)

4010 A

(Formerly 40-10 A & 40-10 AD)

4010 HV

(Formerly 40-10 DT) A high viscous variant of 4010.

A highly flexible bisphenol A resin.

A flexible bisphenol A resin. The amine accelerated version of 4010.

..

Palatal A431 An unaccelerated, medium reactive, bisphenol Nvinylester resin offering alkali resistance.

Palatal A440 An unaccelerated, medium reactive, novolaWvinylester resin, particularly suitable for use in petroleum storage where the methanol content is less than 25%.

E-710 (FR) A flame retardant structural grade epoxy for prepreg manufacture and vacuum bag processing. Cure temperature 160-175°C and a service temperature of 7OOC. Meets MIL-R-9300, Type I, Grade D. E-720E A structural autoclave grade epoxy with good mechanicals at elevated temperature. Cure temperature 175OC and service temperature of 215OC. Meets MIL-R-9300, Type I. E-722 A general purpose structural epoxy with multiprocess capability and good hot-wet properties. temperature 175OC and service temperature of 7OOC. Meets MIL-R-9300, Type I.

Cure

E-746 A modified epoxy with good mechanicals at elevated temperatures and with excellent electrical properties. Cure temperature 175 - 205OC and a long-term service temperature of 260OC. Meets MIL-R-9300, Type II.

130

- Fiberite tnc E-755G A high temperature compression processable epoxy with good chemical resistance and used for the production of space vehicle fuel cells. Cure temperature 175OC and 15OoC service temperature. E-761 A self-adhesive flame resistant, controlled flow epoxy for structural/sandwich construction. Cure temperature 80 - 125OC and hot-wet service operation to 8OOC. Meets BMS 8079V and MIL-R-93008, Type I. E-767C A low flow, catalytic epoxy offering high bond strength and electrical integrity. Cure temperature 175OC and service temperature up to 7OOC.

E-770

A flame retardant epoxy with good hot-wet properties when press or autoclave processed. Cure temperature of 175OC and service temperature of 7OOC. Meets MIL-R-9300 Type I. t-II Z

A industrial grade epoxy exhibiting good mechanicals and a 5-day out-time for recreational, medical and industrial application. Cure temperature 90-15OoC and service temperature up to 135OC. E-795 A general purpose modified epoxy, ideally suited for autoclave or vacuum bag processing. temperature 175OC and service temperature of 70 - 15OoC. Meets MlL-R-9300.

Cure

FCE-722 An epoxy with excellent electrical properties, for autoclave application in the manufacture of radomes. Cure temperature 175OC and a hot-wet service temperature of 95OC. Meets MlL-R-9300B, Type 1. V-376 A cyanate ester resin for prepreg manufacture, autoclave and vacuum bag processing, offering high temperature wet condition performance. Cure temperature 175OC and an equivalent hot-wet service temperature.

At the time of going to press the future of this company remains unsure, although likely on the latest evidence to be acquired by Cytec industries Inc. of West Paterson, NJ, USA,-and t o be known as Cytec Fiberite Inc. Hence known contact addresses for both Fiberite and Cytec Industries Inc have been included in the Directory section. 934 T h i g h flow, 177OC cure epoxy with an equivalent dry service temperature and 93OC, wet. Although formulated for autoclave use, the material can be press moulded. It can be impregnated by both hot-melt and solution techniques and meets all NASA outgassing requirements. Typical applications include structural aircraft and critical space structures. a. 1.30 Tg (dry) 194OC and (wet) 160OC. 938 A77OC curing epoxy resin with a service capability of 177OC dry and 93OC, wet. Autoclave processing is recommended for the tape, fabric and roving prepregs which are typically used for aircraft structures. 948~91 A 121OC cure epoxy with a 71OC dry service capability. A relatively short cure time and non-autoclave processing capability make this a versatile resin system. Typical applications range from commercial and sporting goods applications to helicopter and aerospace structures.

949 A 121OC cure epoxy with a 71OC dry service temperature, widely recommended for a variety of sporting goods applications as well as aircraft structures requiring high stiffness. a. 1.20 Tg (cured) 125OC. continued: 131

Databook - Section 03 :Bisphenol- A, Epoxide, Vinyl & Cyanate Esters & Fumaric Based

-

Fiberite Inc continued: 950 E21-149°C cure epoxy with 104OC dry service capability which can be impregnated via hot-melt or solution techniques. Formulated for shrink tape processing but autoclave, press and vacuum bag moulding can also be used. Typical applications include tubular structures such as fishing rods, golf shafts and bike components. 954-2A A 177OC cure toughened cyanate resin with a 163OC wet service capability, formulated for autoclave or press moulding. The resin can be impregnated via hot-melt or solution techniques on all available fibres and fabrics, for the manufacture of primary and secondary aircraft structures, space structures, cryogenic tanks or any application where impact resistance, light weight and excellent dielectric properties are required. a. 1.24 j. 1.28% 954-3 -

A 177OC curing low micro-cracking/low moisture absorbing cyanate resin with a -128 to +12I0C service temperature range (without post cure), formulated for press and autoclave moulding. Prepregs in all available fibres and fabrics can be manufactured via hot-melt or solution techniques. j. 0.96% a. 1.19 Tg (no post cure) 206OC; (with post cure) 258OC 970 Aontrolled flow 177OC cure epoxy with 149OC dry and 93OC wet, service temperatures. An excellent resin for producing non-porous, void-free honeycomb sandwich structures as well as laminates for aircraft components, using autoclave techniques. Is typically impregnated via the solution technique.

976 A high flow, 177OC cure, modified epoxy with an equivalent temperature dry and 121°C wet, service capability. Meets all NASA’s outgassing requirements and in addition to the use of 976 prepregs (tape, fabrics and rovings) for commercial and military aircraft structural applications, the material finds use for critical space structures such as the space shuttle orbiter payload bay doors.

977-1

A 177OC cure highly-toughened epoxy with a 104OC dry and 82OC, wet service temperature. Available in a broad range of tape, fabric and roving prepregs for the manufacture by press moulding or autoclave of primary and secondary commercial aircraft structures or any application where high impact strength, good mechanical properties and light weight are required. 977-2 A 177OC cure toughened epoxy with a 126-138OC dry and 104OC, wet service temperature. Available in a broad range of tape, fabric and roving prepregs for the manufacture by press moulding or autoclave of aircraft and racing car structures. 977-3 -

A 177OC cure toughened epoxy with an equivalent service temperature in the dry and 132OC, wet. Available in a broad range of tape, fabric and roving prepregs for the manufacture by press moulding or autoclave of aircraft structures such as the F-22 and F-I 8E/F programmes.

984 A controlled flow, 177OC cure, impact-resistant epoxy available in a broad range of tape, fabric and roving prepregs, with 177OC dry and 107OC wet, service temperatures. The resin can be impregnated via hot melt or solution techniques for applications which include commercial aircraft structural components. 7251 -

A 121OC cure, self-extinguishing epoxy, having a 82OC service temperature, for secondary structural and interior aircraft use, whether of laminate or sandwich construction.

132

- Gwil Industries Inc 7665 (replaces 7664) A 179OC cure, flame retarded epoxy designed for use in structural aircraft laminates and honeycomb core sandwich panels, Although formulated for autoclave processing, components can be press moulded and vacuum bag cured.

7669 A 177OC cure epoxy resin for laminates having an equivalent service temperature. Typically supplied as glass, carbon or aramid prepregs for press, vacuum or autoclave cure in the manufacture of secondary aircraft structures.

7701 A 121OC cure self-extinguishing and solvent resistant epoxy designed for use in structural laminates and honeycomb core (to which it is self-adhesive) sandwich panels for aircraft exteriors. Designed for autoclave, but suitable for press and vacuum-bag moulding.

7714 A 121OC cure, self-extinguishing, self-adhesive, solvent resistant, epoxy resin with a good 93OC dry service temperature, suitable for autoclave, press or vacuum-bag moulding. Co-curable with 7714A, which provides considerable design flexibility with respect to the use of hybrid lay-ups. Designed for use in structural laminates and honeycomb core sandwich panels for aircraft. 7714A

A 121OC cure flame retardant, self-adhesive epoxy with a good 71OC dry service temperature, formulated for autoclave moulding although press moulding can be employed. Can be hot-melt or solution impregnated on all available fibres and fabrics. Typical applications include aircraft interiors, seats and control surfaces.

7740 A 121OC or 149OC curing epoxy with a good 104OC dry service capability. Although formulated for autoclave use, can be press and vacuum bag moulded. Can be impregnated via hot-melt and solution techniques, with typical applications including aircraft control surfaces and wing-to-body fairings.

-

7764 A controlled flow, 121OC cure epoxy resin with an equivalent service capability. It is self-adhesive to honeycomb core and is self-extinguishing. Qualifed primarily for aramid reinforcement in the manufacture of aircraft ducting, but the material can also be employed with glass and carbon reinforcement. 7780 -

A 121OC cure epoxy . - designed for use in structural laminates. It is especially effective when used in the construction of large, thick laminates for marine and submarine applications. Whilst designed for autoclave use it can be press and vacuum-bag moulded.

97714A A 121OC cure, flame retardant, self-adhesive epoxy with a good 71OC dry service temperature for commercial aircraft application. Meets all NASA outgassing requirements.

W-2299 A modified vinyl ester. c. 250-35Ocps

e. 17-30/21

133

Databook - Section 0 3 :Bisphenol- A, Epoxide, Vinyl & Cyanate Esters & Fumaric Based

Hetron 700 A bisphenol corrosion resistant resin.

i. 13OOC

Hetron 822 PA A thixotropic, preaccelerated, vinyl ester, corrosion resistant resin. Hetron 922 A low viscosity, vinyl ester, corrosion resistant resin.

922-6

e. 25-35/25

i. 1OOOC

i. 100°C

A thixotropic version of 922.

Hetron 960 A low viscosity, vinyl ester offering a higher heat distortion temperature.

i. 121OC

Hetron 4036 P A low viscosity vinyl ester, suitable for the manufacture of continuous sheeting. Hetron 6710 PA A preaccelerated, thixotropic vinyl ester for corrison resistant purposes. Hetron FR992 H A flame retardant, low viscosity, corrosion resistant vinyl ester.

i. 121OC

e. 10/25

i. 1OOOC

i. 108OC

-

Fuli - RTM 3 Vinvl Resin A vinyl ester resin for RTM application.

-

Fuli 883 Vinvl Resin for FW A vinyl ester resin specifically designed for filament winding.

11 b]

ai .. 1;

-

5565%

11 k i

11 c i 0.4-0.55 11 dj 11 I ] 11 mj

10-16 11 ei 10-16/25 11 f I 11 n j 3% o j

Fuli 889 Bisphenol A Resin for FW A bisphenol-A resin suitable for filament winding.

134

11 g i II PI

40

1hi

u 4:

11 i j

>IOOOC

ri

- Jotun Polymer AS

Shortly before going to press, the company was acquired by Reichhold Chemicals Inc. Changes to Jotun -manufacturing units, name, distrbution or other arrangements, and with regard to possible alterations in the respective resins supplied, have not been advised.

The following “Norpol” Cor VE Epoxy vinylester resins are manufactured under licence from the Interplastic Corporation. NorrJol 8100-050 An unaccelerated low molecular weight bisphenol-A epoxy . . . based vinylester base resin, intended for resin transfer moulding and centrifugal casting. at

j

1 bi

50%

i 0.65%/28 11 k i

8100600 :

1 ci 150-200 [ d! 9 11 e; 25-35/23 1 f 130 I I 79 Imi 3.25 1 n; 4.5% 1 o i

II 4:. Pi

[ h!

I 41

1i

10OoC

I rf

A preaccelerated, medium reactive version of 8100-050. RLT 2 to 8mm.

NorRol 8300-045 A standard unaccelerated bisphenol-A epoxy based vinylester base resin, offering excellent chemical resistance and intended for hand-lay, cold-press moulding, filament winding, pultrusion and centrifugal casting. Can also be employed for continuous lamination.

8300-200 :

An unaccelerated, thixotropic epoxy vinylester, offering chemical resistance for hand-lay. c 900-1100

830040 :

An unaccelerated thixotropic epoxy vinylester. c 3800-4200

8300-700 :

A preaccelerated, medium-to-high reactivity, thixotropic epoxy vinylester offering chemical resistance and a relatively short demoulding time. RLT 1 to 5mm. c 1000-1300

8300-800 :

A preaccelerated, medium reactive, thixotropic epoxy vinylester offering chemical resistance. RLT 2 to 7mm. c 1000-1300 e 40-50/23

NorRol 8440 An unaccelerated, brominated, fire retardant epoxy vinylester base resin containing 3% antimony trioxide. Suitable for cold-press moulding, continuous lamination, pultrusion and filament winding.

NOIDOI 8515 An unaccelerated, flexible bisphenol-A epoxy based vinylester base resin, suitable for centrifugal casting or as a tanWvessel liner exhibiting excellent chemical resistance.

Nomoi 8550 An unaccelerated, rubber modified bisphenol-A epoxy based vinylester base resin, suitable for centrifugal casting or as a tanWvessel liner exhibiting excellent chemical resistance.

8550-300 :

An unaccelerated rubber modified, thixotropic vinylester offering chemical resistance for handlay fabrication. c 1000-1300 e 35-45/23 i 90°C n 8.0%

continued:

135

Databook - Section 0 3 :Bisphenol- A, Epoxide, Vinyl & Cyanate Esters & Fumaric Based

-

Jotun Polymer AS continued:

8550-800 :

A preaccelerated, medium reactive, thixotropic, rubber modified vinylester offering chemical resistance for hand-lay fabrication. RLT 3 to 8mm. c 1000-1300 e 35-45/23 i 90°C n 8.0%

NorDol 8710 An unaccelerated heat resistant, bisphenol-A epoxy based vinylester base resin. Suitable for filament winding.

8710-800 :

A preaccelerated, medium reactive, thixotropic epoxy vinylester offering chemical resistance for hand-lay fabrication. RLT 2 to 7mm. c 1000-1300 e 35-45/23

NorRol 8730-036 An unaccelerated epoxy novolac based vinylester base resin, offering excellent chemical resistance as well as high heat resistance. Suitable for pultrusion and filament winding.

1 bi

ai j

I

0.9%/28

64%

11 k f

11 c i 130

350-550 11 dl 9 11 e: 12-20/23 f 72 I] mi 3.6 11 n j 3.0%

11 I

1f (1 0 ;

si

II Pi

11 hi II 4:

11 i j

14OOC

11 r j

8730-200 :

An unaccelerated, thixotropic epoxy novolac vinylester offering chemical resistance for handlay fabrication. c 1000-1300 e 20-30/23

8730-410 :

An unaccelerated, thixotropic novolac epoxy vinylester. c 3800-4200

8730-800:

A preaccelerated, medium reactive, thixotropic epoxy novolac offering chemical resistance for hand-lay fabrication. c 1000-1300 e 35-45/23

Nomol 8770 A high heat resistant epoxy based vinylester base resin.

Distitron 3560 S A preaccelerated bisphenol type resin offering very good chemical resistance specifically designed for handlay, spray/projection or filament-winding. Can also be employed for centrifugal casting.

I ai

11 b i

56%

]I cl

300

11 dl

11 ej

1fi

11 91

11 hi

11 i i

IIOOC

1

Distitron VE 100 An unaccelerated bisphenol vinylester offering good fibre wettability and good chemical resistance, for manufacture by hand-lay, spray/projection deposition, filament-winding, or pultrusion.

Distitron VE 200 An unaccelerated bisphenol vinylester offering good fibre wettability and excellent chemical resistance, for manufacture by hand-lay, spray/projection deposition, filament-winding, or pultrusion.

136

- Naptha Resins & Chemicals Private Limited

VeriMac 152-0584 A flame retardant, unaccelerated, non-thixotropic vinyl ester (dimethacrylate ester of a brominated bisphenol-A epoxy) which with the addition of 3% antimony trioxide can achieve a flame spread rating of less than 25 (ASTM E-84).

VeriMac 157-0584 A highly cross-linked vinyl ester formulated for elevated temperature cure, but suitable for ambient temperature cure with the addition of a promoter. Has excellent resistance to many aggressive solvents. Suitable for pultrusion and press moulding.

VeriMac 781-0410 An unaccelerated, non-thixotropic epoxy . . . formulated and cured can be . - vinyl ester which when properly employed for the manufacture of equipment incontact with foodstuffs. a! 1.07

..

11 b!

70% 11 c i kI 134 11 I !

1300 69

11 d / 11 e! 1 m! 3.9 1 ni

10-20/25 1 f f 3% oi

u

1 gi

n Pi

30-35

1 hi N qi

11 i i 115OC 1r i

VeriMac 705-0644 A preaccelerated and thixotropic epoxy vinyl ester (dimethacrylate ester of bisphenol-A epoxy) offering outstanding mechanicals, superior toughness and fatigue resistance.

VeriMac 785-8430 An unaccelerated, non-thixotropic, ‘standard workhorse’ epoxy vinyl ester which when properly formulated and cured can be employed to fabricate components in contact with foodstuffs. Also an excellent choice for components used by the chemical, pulp and paper, mining and power generation equipment. a; 1.05 .. Ji

785-9434

11 bl

55% 1 c ! 145 I] I

11 k j

!

450 83

11 dj 11 e! 11 mi 3.7 11 nI

10-20/25 11 f 54% u o !

i

1 g!

u Pi

30-35

11 hi II q!

11 i 1r !

~OOOC

A preaccelerated version of 785-8430.

Polvf/ex GR 200-30 A moderate viscosity bisphenol fumerate modified resin offering good wettability with outstanding chemical resistance properties, particularly to alkalis. Suitable for hand-lay and filament winding. a j 1.04 1 b; 50% 11 c i 500-600 j 0.5%/28 1 k,! 90 11 I 55

I

11 dj 11 mj

10

1 e;

1 fj 1oi

10-20/25

Jj n i 1.9%

]I

gi 35

II Pi

11 hj

u qi

1 i i 125OC 11 r i

Polvflex GR 200-32 A hand-lay UV stabilised, superior corrosion resistant bisphenol.

continued: 137

Databook - Section 0 3 :Bisphenol- A, Epoxide, Vinyl & Cyanate Esters & Fumaric Based

-

Naptha Resins & Chemicals Private Limited continued:

Atlac 580-05 & 580-05 A (31729-00 & 31730-00) Corrosion resistant, pipe resins offering exceptional wetting characteristics with carbon and aramid fibres as well as glass. 580-05is preaccelerated, 580-05A is not. c. 400

Dion 6694 & 6694 GA (31734-00 8,31722-00) Bisphenol fumerate resins for use where resistance to hot alkaline environments is specified. Available also in granular form. No property details provided - see the manufacturer’s “Product Bulletin”. Dion 91OONP (31347-00) An unaccelerated bisphenol epoxy vinyl ester for pipe and tank construction offering corrosion-resistance e. See manufacturers recommendations under a wide variety of acid and alkaline conditions. c. 500 re. accelerator/catalyst additions offering variable gel time. Dion 9102 (31365-00) A special version of 9100NP offering reduced viscosity and lower accelerator levels to enhanced performance in filament winding applications. c. 230 e. See note under 91OONP above. Dion 9300 (31353-00) A brominated vinyl ester offering premium corrosion-resistance, toughness, heat resistance and a Class 1 e. Same note as under 9100NP above. flame spread with a 3% antimony trioxide addition. c. 450

HST-5 A 100% reactive, clear, unfilled epoxy . - laminating resin offering excellent moisture and chemical resistance, and good impact resistance at low temperature. a . I.5 c. 25OOcps k. 213 I. 203 m. 11.3 HTR-212 A flexible, unfilled, clear, room temperature cure epoxy for high temperature applications and offering as well as a good heat distortion temperature, chemical resistance and excellent adhesive and wetting quality on all forms of reinforcement. Two hardeners are available, HT-386 and HT-386-99. a. 1.16 i. 163OC k. 283 I. 86 m. 13.6 HTR-250 A clear and rigid, unfilled room temperature cure, tough, strong, good heat distortion temperature and chemical resistant, epoxy laminating resin. a. 1.16 i. 190°C k. 265 m. 12.7 138

- Showa High Polymer Company Limited HTR-386 A tough, good impact-resistant, room temperature cure epoxy resin offering high temperature resistance and designed for RTM application. a. 1.18 i. 232OC k. 379 m. 43 LR-I 05 A white room temperature, but fast curing epoxy resin with excellent wet-out, designed for the production of thin skin laminates and offering good physical properties. a. 1.60 i. 93OC k. 192 1. 146 WB-400

A low cost, clear epoxy laminating resin for small parts and thin skin lay-ups such as wind surf boards. Four hardeners are available, 382, C-201, LH-101 and SC-150-N. a. 1.13 i. 46OC k. 111 I. 74 m. 3.9

PX672C A twinpack epoxy suitable for use as a matrix with e-glass reinforcement. Used with hardener HX672C.

Shell offers a wide range of @on epoxy resins and systems for specific processing and performance needs, and with cure times as short as a few minutes. Shrinkage is typically of the order of 1 3%, with toughness often of the order of 8% elongation. They can also offer the fabrication of fatigue-resistant structures, significantly more economical than the use of vinyl ester or polyester resins. For example:

-

Eaon RSL-2704lRSC-2705 A low viscosity epoxy designed for vacuum bag and resin transfer moulding.

I ai

1.14

1 bi

11 C i

1400-16OOcps

11 di

11 e:

4.8hrs/25

I

Ripow H-600 EX-1 A vinly ester (epoxy acrylate of bisphenol-A) offering excellent resistance to acids, oxidising acids, solvents and thermal effects. Suitable for hand-lay, filament winding and as a liner resin using either reinforcement or glass flake.

Riaow H-610 EX-1 Comments as for H-600 EX-1. ai . . 1.052

Ji

11 b i 55% 11 ci 0.3-1.0p/25 1 di 1 ei 35-45/25 4 f i 4 gi 11 k j 143 11 I j 69-79 11 mj 3.5 11 nj 2.53% 1 o j 118 11 pi

42 89

4 hf 8-9% 1 i f 11 q i

6.4

137OC 1.8%

11 r i

Ripoxy H-630 EX-1 Comments as for H-600 EX-1.

139

Databook - Section 0 3 :Bisphenol- A, Epoxide, Vinyl & Cyanate Esters & Fumaric Based Showa High Polymer Company Limited - continued: RiRow R-802 EX-1 A vinly ester (epoxy acrylate of bisphenol-A) offering resistance to a wide range of chemicals, tough and with good fatigue resistance, even at low temperatures (e.9. above -1SOOC). Suitable for hand-lay and filament winding and as a liner resin with either reinforcement of flake glass.

Ripow R-804 EX-1 Comments as for R-802 EX-1 ai 1.044 . .

I] b i 55% 11 c j 2-3,5p/25 11 di 11 k j 128-148 11 I f 69-79 11 mi

11 f .i 11 oi

141

11 gi 36 1 hj 7.5-8.5% 11 i i 105OC ]I p i' 93 ]I q i' 5.5 11 r i 2.2%

11 e ; 20-25/25 11 f 1 ni 3.2% 1 01

133

11 gj 37 u h ] 7.5-8.5% 11 i i llO°C 11 p ' 89 11 q i 6.5 1 r ; 2.2%

1 ei 2.7

20-25/25 4.6%

1 ni

Ripow R-806 EX-1 Comments as for R-802 EX-1, aj 1.042

.. J i

11 b j 55% (1 ci 0.9-2.5~/25 1 d i 1 k ! 128-148 1 I i 69-79, 1 mi

3.1

Ripow S S I O EX-I A flame retardant vinyl ester (epoxy acrylate of bisphenoCA), with resistance to sulphuric acid.

RiRow S-550 EX-1 Comments as for S-510 EX-1

LP-8Q An unaccelerated, non-waxed, rapid-cure bisphenol-based resin for corrosion-resistance and suitable for both hand-lay and spray/projection lamination. Also suitable for filament winding, centrifugal moulding and pultrusion.

I a;

11 b j

LP-8BQTN

)I c i

4-5

I]

di

1 ej

15 - 18/30

1

An accelerated version.

1SIR 1NDUSTRIALE Sirester BS 62 An unaccelerated, high chemical resistance bisphenol, designed for filament winding.

140

- SP Systems Limited Sirester ES 0866 An unaccelerated, flame retardant, chemical and heat resistant, bisphenol.

A mineral filled (ATH) version of ES 0866 offering enhanced flame retardancy. b. 84%

ES 0866/X

Sirester BS 0944/R An unaccelerated, fast curing, bisphenol offering excellent mechanical properties.

Sirester BS 0953 An unaccelerated, high chemical resistance, high elongation, bisphenol.

Sirester BSW 500 An unaccelerated, higher elongation, bisphenol.

Sirester BSW 0937 An unaccelerated, high elongation, bisphenol.

SP 115 A low viscosity, high strength epoxy . . laminating system of excellent clarity and good UV resistance for the production using ior example, polystyrene foam blanks of sail and surf boards, offering greater toughness and skin strength than with the traditional polyesters. Can be employed as a cosmetic flow-coat, to obtain a thick, high gloss finish over the laminate.

-

ai .. J i

11 b f

-

11 k !

1 ci 11 I !

122.2

71.5

11 di 11 e! 11 mi 4.1 11 n i

10-20/21 3.2% 11 o i

11 f i

U pi II P i

11 hi II q!

u i !

11 r i

Using SP 1 15 Hardener,and room temperature cure for 14 days. Post cure at 16hrs/25% and 5hrs at 80% will enhance strength.

I

SP 631 A high performance, medium to low viscosity epoxy laminating resin formulated to give a cured resin with excellent mechanical properties (e.g. high elongation) over a large temperature range and with a very high resistance to moisture. Suitable for use with glass, carbon and aramid fibres. Three hardener systems can be employed - see manufacturers recommendations - and two compatible gelcoats SP127 (up to 7OOC) and SP 531 (up to 100°C) are also available.

continued: 141

Databook - Section 03 :Bisphenol- A, Epoxide, Vinyl & Cyanate Esters & Fumaric Based SP Systems Limited - continued: SP Amrorea 20 One of a new generation of low viscosity wet-lay laminating epoxy resins formulated without DDM (MDA) or phenol. For the manufacture of high strength, light-weight composites with glass, carbon or aramid, using contact, vacuum, pressure bag, filament winding or RTM techniques.

11 b /

ai .. J i

1 kf

11 c f 11 I

159

13OOcps 11 d f 80 11 rnf 3.5

40/25 11 f f n f >5% 11 o f e!

With standard hardener, and curing at 5hrs/ 80%

II s f II Pi

11 h f II 4:

1 i ! 78OC 1 ri

SP AmRrea 26 A long 'open time' DDM free epoxy laminating system of low mixed viscosity, for use in the manufacture of large composite structures where the fast wet-out extreme range of working time and easy handling of the system, allows processing flexibility and enhanced quality and efficiency. Ideal for RTM and filament winding applications.

Swancor SW-900 A modified novolac vinyl ester, providing extreme chemical resistance (e.g. to organic solvents, oxidising chemicals and hot waste gases), with excellent retention of strength and toughness, even at 200OC. aj 1.07 .:

11 bj 11 k i

64.5% 117-138

11 c i 11 I f

250-550 11 dj 76-90 ! d 3.7-4.0

11 ei

15-25/25

11 f f

1 gi 40-46 h j 9.5% 11 i j 152OC II P f II qi 1 rj

u n! 2.2-2.8940 11 o f

Swancor SW-901 A general purpose, bisphenol-A vinyl ester resistant to a broad range of acid, base and salt solutions, commonly up to 1OOOC. Various viscosity versions are available for hand-lay, RTM, pultrusion and filament winding see below.

-

11 b ! 11 k j

.a .f 1.04

Ji

55%

11 c i 350-550 11 di 11 I j 76-135 11 mi

117-138

11 g!

11 e; 15-25/25 1 f i 11 n j 5-6Oh I] o j

u PI

3.1-3.4

SW-901-L

A low viscosity version of SW-901. Low molecular type.

SW-901-P

A preaccelerated version.

SW-901-T

A thixotropic version.

35

11 h j 8.0% 11 i i 100°C II 41 1r i

A preaccelerated and thixotropic version. SW-901-PUL A version specifically formulated for pultrusion. SW-901-TP

1 b! 11 k j

a! 1.04

..

1

53% c f 100-300 124-144 1 76-135

I[

11 d'i 11 e! 20-40125 1 f ! 7-20 11 g f 32-38 1 h! 8% [I mf 3.2-3.4 n f 5 6 % 11 0 ; u Pi II qi

u i1

100°C

[[ r f

Swancor SW-905 A flame retardant, brominated vinyl ester offering high resistance to mechanical and chemical damage. The

flame retardance may be further enhanced with the addition of antimonmy trioxide. ai 1.22 .. J i

11 bi 60% 11 c f 250-450 11 d f 11 k ; 124-138 11 I 76-90 11 rnj

11 e ! 15-25/25 11 f f 3.5-3.9 11 n f 4.5-5.5% 11 o j

1 gj

38-45

I

P!

11 hf 7.8-8.0% 11 i i 108-112°C II 41 11 r f

SW-905-N

A brominated, novolac type.

SW-905s

Specially formulated version with military marine market applications, e.g. the production of high speed, bullet resistant, lightweight, naval craft.

142

- Vianova Resins AG Swancor SW-907 A hiah Derformance Novolac type vinyl ester offering corrosion and oxidation resistance (to a mixture of cherkcals and solvents), with a-superior retention of properties at high temperature.

Swancor SW-908 A more flexible vinyl ester resistant to a broad range of acid, base and salt solutions typically to around 100°C maximum. Various viscosity versions are available as suitable for hand-lay, RTM, pultrusion or filament winding.

Swancor 91I Identical to SW-901 but at 50% solids content.

Swancor 915 A vinyl ester stated to be approved by Lloyd’s Register, but no further details provided by manufacturer. Swancor SW-977 A vinyl ester with an emphasis on solvent resistance (e.g acetone and benzene).

Swancor SW-980 An elastomer modified vinyl ester offering increased toughness, adhesive strength, and superior resistance to abrasion and severe mechanical stress. The impact properties are three times that of standard vinyl esters, but without any loss of physical properties and chemical resistance.

Viapal F 195E A low reactive, low viscosity, excellent strain at break and resistance to chemicals, bisphenol-A flexibilising Viapal H 495 in the manufacture of impact resistant gelcoats and laminates. b. 70% c. 460-830mPas

for

ViaiDal H 495 A high reactive, low viscosity bisphenol-A:fumaric acid resin offering high dimensional stability at elevated temperature & high resistance to chemicals and particularly alkalis and hydrolysis. b. 48% c. 370-620 H 495E H 495G H 495P

An enhanced storage version of H 495. A granular monomer free version of H 495, for on-site dilution with styrene. A powder version of H 495G with better styrene solubility

ViaDal VUP 4652 A high reactivity, low viscosity vinyl ester (epoxy-novolak base) offering extraordinary good chemical resistance and high dimensional stability at elevated temperature. Particularly resistant to combinations of acids, halogenated organics, sodium hydroxide and solvents. b. 65.5% c. 340 510

-

143

Databook - Section 0 4 :Hybrid Systems

Viscovoss PHA 10 An unaccelerated, medium viscosity vinyl ester suitable for hand-lay, spray/projection deposition and vacuum bag fabrication. Viscovoss PHA 11 An unaccelerated vinyl ester which compared to PHA 10 exhibits a lower viscosity, higher heat and chemical resistance. Viscovoss W 45 A bisphenol-A resin suitable for hand-lay, spray/projection deposition, filament-winding and low pressure moulding processes.

D4

HYBRID SYSTEMS

Crestorner I 174PA A preaccelerated, flexible high performance laminating urethane acrylate hybrid resin, particularly suited to high deflection applications, with high impact resistant properties. Offers excellent adhesion to both glass and aramid fibres which benefits interlaminar shear properties.

Crestorner 1220PA A preaccelerated,thixotropic, tough, impact resistant laminating urethane acrylate hybrid resin, designed for high performance applications, but with the ease of use of a polyester. Approved by Lloyd's Registry.

Addito/ VXT 6225

144

- Blagden Cellobond Limited

D5

PHENOLIC BASED

N.B. Formerly BP Ghemicals Limited

J2018L

C.

500-600

J2027L

C.

220-320

J2033L

C.

1500-1700

J2042L

c. Thixotropic (TI = 2.2 to 3.2)

The following general data applies. mins; water content 10 - 13%.

a. 1.220

I

-

1.250; pH 7.3 7.8; free formaldehyde 3.0%; e. 4 - 8

Three processing catalysts are offered. They are all blends of organic and inorganic acids.

Phencat 10 A general purpose catalyst for processes such as hand-lay. Phencat 15 A fast action catalyst specifically designed for resin injection and spray/projection deposition, where pot life is of lesser importance. Phencat 382 A delayed-action catalyst which is activated at typically 60-8OoC. It offers up to a four-fold increase in pot-life and reduced exotherm risk in isothermal RTM or press processes.

PROCESS

RESIN

CATALYST

J2042L or J2018L P I 0 or P382 Hand lamination .................................................................................................................................................................................................................... J2042L or J2018L P I 5 or P382 Spray deposition ............................................................................................................................................................................................................ J2018L or J2033L P I 0I......................................... P15orP382 ...warm.~~ess..mou!ding ................................................................................................................................ ...Resin.transfe~.m!d~ng J2027L or J2033L P382 ........................................................................................................................................................................ J2027L or J2018L P I 0 or P382 Pultrusion (catalyst cure) ................................................................................................................................................................................................................. None 52041L ...Pu!!~us~on.~her.ma!cu~e~ ...................................................................................................................................................................... PI0I .......................................... PI5 or P382 Vacuum injection J2027L ........................................................................................................................................................................ Resin infusion (e.g. "SCRIMP") J2027L P382 ................................................................................................................................................................................................................. J2027L PI0 or P382 Continuous lamination ..................................................................................................................................................................................................................... J2027L P10, P I 5 or P382 foam .................................................................................................................................................................................................. Filament winding

J2027L

PI0 or P382

Grade Colour CPD 1382 Black ........................................................................................ CPD 1396 Blue ........................................................................................ CPD 1397 Green ........................................................................................ White CPD 1402 ........................................................................................ CPD 1406 ........................................................... Ora!!P ............... CPD 1412 Yellow ........................................................................................ CPD 1420 Red ........................................................................................ CPD 1427 Brown

145

Databook - Section D5 :Phenolic Based

P963lP964 P963 is a liquid phenolic resole designed to be used with catalyst P964 (para tolune sulphonic acid & phosphoric acid) for the production of hand-lay or low pressure/low temperature compression moulding. The resin contains 10% acetone to provide a useable mix viscosity, fast binder breakdown and reinforcement wet-out. Principal use is for thin-walled aircraft components. Class 0 - BS476, Part 6; Class 1 - BS476, Part 7; Ds (max) = 11.76 mins.

PA-I04lPX-13 A system for the production of low smoke emission composites by hand-lay, spray/projection and RTM techniques. Offers low viscosity and excellent wet-out. Catalyst PX-13 is a solution of organic and inorganic acids.

[

ai 1.25

11 b !

69%

11 ci

550cP

PA132lPX13 A low viscosity phenolic resin system designed principally for the production of laminates by filament winding and resin injection techniques.

SC1008P For the production of typically aerospace and defence industry phenolic laminates via the pre-preg process. Glass cloth laminates meet Class A & B, of the US MIL-R-9299C specification. aj 1.085 .. J i

11 bi

60%

11 k i

1 ci

)I

I j

2.4P 61.3

11 di 11 m]

Laminates were made using 181E glass cloth with A-1 100 finish at 1421kgfkm’.

F-502

A modified structural phenolic for prepreg application. Meets MIL-R-9299, Type A. F-532 A high temperature resistant phenolic offering good mechanicals at elevated temperature. Meets MIL-R9299, Type A & B.

At the time of going to press the future of this company remains unsure, although likely on the latest evidence to be acquired by Cytec Industries Inc. of West Paterson, NJ, USA, and to be known as Cytec Fiberite Inc. Hence known contact addresses for both Fiberite and Cytec industries Inc have been included in the Directory section.

6001

-

A 149 177OC cure phenolic for service temperatures up to 26OoC, designed for aircraft interiors, ablative and carbon/carbon applications.

6070

A 138 - 16OOC cure phenolic (service temperature up to 260OC) for processing by vacuum-bag, press or autoclave methods in the manufacture of aircraft interior laminates and crushed core panels.

146

- Hepworth Minerals & Chemicals Limited

6830

A 127 - 149OC cure phenolic for processing by vacuum-bag, press or autoclave methods in the manufacture of aircraft interior laminates and sandwich panels.

6874 -

A 127 - 149OC cure, modified phenolic resin for prepreg application for press cured parts for aircraft interior sandwich panels.

7724 A 121OC cure phenolic with a dry service temperature of 71OC and finding application in aramid reinforced sandwich panels.

GP 413040 Resi-set A thermal cure hot melt phenolic resin providing adequate stability and viscosity and developed for the manufacture of aerospace prepregs. Cured glass composites (60 minutes @I 135OC) demonstrate excellent flexural, tensile and compressive properties. The resin can be modified with GP413D41 and GP464D20 elastomeric modifiers to produce composites with improved toughness while maintaining superior fire resistance and low smoke density.

I

ai

11 b i 85-88% 11 ci

70.000-100.000~~sI

GP 413D97 Resi-set A low emission, waterborne phenol formaldehyde resole 'for general impregnating applications including paper, glass and carbon fibres

I

ai

11 b i

60-65%

11 ci

100-350

11 d!

8.4-8.8

I

GP 442D35 Resi-set A waterborne, thermally cured phenolic resole specially developed for use in the manufacture of pultruded composite parts. a. 1.21-1.23 b. 7578% c. 5000-7OOOcps GP 50181GP 4839 Resi-set An industrial phenol formaldehyde resole resinkatalyst system specifically developed for filament winding but also suitable for pultrusion, RTM and hand-lay in the manufacture of products offering superior flame resistance with low smoke generation as required in many sectors of the aerospace, construction and mass transportation markets. GP 5018 a i 1.22-1.241 b J 77-80%

I

11 c:

1600-3000

1 d!

6.5-7.5

I

GP 5022lGP 4822 Resi-set An industrial phenol formaldehyde resole resinkatalyst system suitable for hand-lay, RTM and filament winding, in the manufacture of products offering superior flame resistance with low smoke generation as required in many sectors of the aerospace, construction and mass transportation markets. GP5022 a i 1.2

I

11 b l

70-74%

1 ci

600-1000

11 d j

7-8

I

This company specialises in the manufacture of a wide-range of thermosetting phenolic resins which are tailor made for customers within the following typical industries: abrasives (flexible, non-woven and rigids), industrial laminates, refractory, foundry and ancillary products, paper-impregnation, friction materials and general laminating applications. Consequently no data sheets are published. 147

Dafabook - Section D6 :Polyurethane Based & RIM/RRIM/SRIM Resins

D6

POLYURETHANE BASED & RIM/RRIM/SRIM RESINS

Bavdur A range of both general purpose and flame retardant, two component MDI-based structural foam RIM liquid systems suitable for large parts having both thick and thin walls and offering stiffness, a high-gloss finish and surface quality in-mould coating. Markets range from agriculture, through construction, automotive and electrical-electronic,to medical. a 0.24 0.32 0.40

k 6.5 8.3 13.8

I 3.85 6.06 8.27

m 0.220 0.303 0.461

n 7% 7% 7%

a 0.48 0.64

k

Density 30pcf Density 40pcf

24.12 25.49

I 13.44 22.05

m 0.716 1.191

n 7% 7%

77OC 85OC

Density 35pcf Density 40pcf

0.56 0 64

k 27.56 37.90

I 13.78 18.6

m 0.861 1.171

n 10% 10%

7OoC 8OoC

Density 40pcf Density 55pcf

a 0.64 0.88

k 38.58 62.01

I 21.36 33.07

m 1.102 1.653

n 8% 8%

1OOOC

a

k

I

m

n

S

a 0.58 0.58

k 34.5 37.3

I 19.29 17.23

m

n 16% 11%

S

Density 15pcf Density 20pcf Density 25pcf

S

660 IBS

a

Unfilled With 15% milled glass

148

I

0.974 1.396

S

S

S

83OC

47OC 49OC

- Bayer Corporation Bavdur STR Low and high density, two component, MDI-based liquid systems for composite SRlM application, offering exceptional impact strength and stiffness in large structural parts as required by the automotive industry.

Bavflex Elastomeric polyurethane RIM, two-component MDI-based liquid systems available unfilled, glass-filled or mineral/microsphere filled offering large part mouldability, superior impact strength and excellent surface quality and in-mould coating, for agriculture, construction, automotive and special transportation application.

a UnfiIled 20% Glass (CSM) 40% Glass (CSM)

1.18 1.28 1.44

k

I

49.61 99.91 172.25

m

n

S

8% 4% 4%

71OC 215.6OC >218OC

149

-

Databook Section D6 :Polyurethane Based & RIM/RRIM/SRIM Resins

A range of polyurethanes for rapid prototyping. Ureol 5211 AIB

Very flexible, black, simulates rubber.

Ureol 5212AIB

Neutral, translucent, flexible, simulates HDPE.

Ureol 5213AIB

Caramel in appearance, flame retardant to UL94V-0, simulates PP/ABS

Ureol 5214AIB

Beige, pigmentable, high temperature resistance, simulates PP/ABS.

Ureol 5215AIB

Black, high temperature resistance, simulates PP/ABS.

Ureol 5216AIB

Beige, toughened, high impact resistant, pigmentable, simulates PP/ABS.

Ureol 5217AIB

Black, toughened, high impact resistant, simulates PP/ABS.

Ureol 5218NB

Black, high modulus and impact resistant, toughened, simulates PP/ABS.

Ureol 5219AIB

Neutral, translucent, for adding to faster systems to reduce reaction rate.

Ultracore Hybrid polyester/polyurethanestructurat foam - a new reaction spray moulded structural foam core support.

Ultrathane Structural Resins Reaction spray moulding, structural technology.

Ultrathane 5410 8,5440

Polyurethane/polyureasystem having excellent impact and heat sag resistance and moderate stiffness.

Ultrathane 5450

A mid-to-high modulus structural urethane which is more cost-effective than 5315.

150

- Akemi Inc

Product Code U532 Bavtec RTM 532 A two component liquid polyurethane system designed for the RTM moulding at high productivity, of large high strength structural components with high glass loadings, such as vehicle body panels, industrial processing equipment and marine accessories. Component A is a modified diphenylmethane diisocyanate and component B is a polyether polyol blend.

11 b !

a!

..

11 k i

1:

78

11 c ; 11 I i

50

11 di 11 e ; 11 mi 2.1 11 n l

11 f i 8.0%

11 01

152

II si 1 pi

100

Ihi 11 q j

4.5

11 i f 11 r

71OC 4.0%

EL221 C A two-part, low viscosity, room temperature cure polyurethane. Hardener HL221C.

D7

FURANE BASED SYSTEMS

Hetron 800 A furan polymer derivative of fufuryl ,alcohol and furfural, exhibiting excellent corrosion resistance other than when exposed to some oxidising chemicals. The manufacturers recommendations with regard to catalysis, cure and handling must be strictly adhered to. ai 1.21 ii

D8

1 bi

11

11 ci ki

71

11 d f

240

11 I i

35

11

mi

11 e ! 3.9

10-17.5/25 f f 1.0% 11 0 ;

11 ni

11 g i

11

Di

40

11 i i

11 hi II

ai

I1

1OOOC ri

UNSATURATED POLYESTER RESINS FOR LAMINATING & ASSOCIATED PURPOSES

No. 19L POLYESTER LAMINATING RESIN A preaccelerated ambient temperature cure, rigid, low reactivity, low viscosity, general purpose orthophthalic

for hand-lay and spray/projection deposition.

e. 12-18/25

APL 1400 A double promoted, unfilled thixotropic laminating resin.

151

Dafabook - Section 0 8 :Unsaturated Polyester Resins For Laminating & Associated Purposes

IALPHAIOWENS CORNING 1 8-3P -

An accelerated, general purpose, thixotropic isophthalic offering excellent mechanical properties and high chemical resistance. Approved for use where retention of water quality is important. Can be employed as a tooling resin.

. .

J i

..

..

J i

11 k!

11 k j

100

106

11 I !

11 I j

62

65

11 rn!

11 mj

3.6

3.9

I] nj

11 nj

Pi

II q i

11 r !

2.2%

I] o !

II PI

14:

I]

2.11%

11 0 :

Pi

II si

11 r j

ri

designed for the manufacture of architectural sheeting or panels. Offers low water absorption.

81-6020

An unaccelerated, thixotropic, isophthalic/NPG resin, offering excellent mechanical properties and water

..

152

- AlphdOwens Corning E-I 20 A high molecular weight two-stage neopentyl-isophthalic,with the wet-out, cure and handling characteristics of general purpose resins and offering excellent corrosion resistance. Ideal for filament winding and spray/projection lamination. Available accelerated, unaccelerated and in thixotropic grades.

E-701 The unaccelerated and non-thixotropic version of E-704 - see further entry below. resistance required. E-709 - see further entry below - is the accelerated version.

. :

I

II P f

Where corrosion

11 r i

qi

E-709 A high molecular weight, preaccelerated, corrosion resistant two-stage isophthalic resin ideal for filament winding and spray/projection deposition. (Based on E-701) a;

..

u

1 b j 55% ]I ci 400 11 di 17 11 e ] 7-30/25 f i 11 k i 107 11 I j 62 11 mi 4.1 11 n j 2.0% 11 o i

11 g;

I

P!

45

11 hi

I

qi

11 i ! 107OC 11 r j

E-737 An unaccelerated, resilient isophthalic resin for corrosion resistant mouldings fabricated by either filament winding, pultrusion, cold-press moulding or in-situ casting. Initially designed for the manufacture of underground pipes. A flexibilised version of E-701. aj

..

J i

11 b ] 60% 1 c i 425 11 di 10.5 11 el 22/25 11 f j 11 k j 140 11 I j 8 2 . 11 mi 3.8 11 nj 3.4% 1 0 ;

5.0

]I

gi

I PI

11 i j

11 hi

84OC

I

ql

1 rj

I

q!

1 rj

Accelerated, thixotropic and non-thixotropic versions are available.

..

li

Pi

F11-2520 A preaccelerated, thixotropic, general purpose orthophthalic designed for use as a back-up resin in hand-lay and spray/projection fabricated applications such as truck cabs, trailers and boats.

153

Databook - Section 0 8 :Unsaturated Polyester Resins For Laminating & Associated Purposes

AM€ 5000 Low VOC A high performance polyester containing less than 35% styrene monomer designed for marine laminates and as well as offering excellent surface quality, low shrink, impact and blister resistance meeting the requirements of the Southern California Air Quality Management District Rule 1162 for volatile organic compound resins. Aropol 7030A May be used instead of Envirez 8030 - see below. Aropol 7241RT An unaccelerated, low viscosity, chemical and heat resistant isophthalic resin formulated for RTM and offering similar characteristics to Aropol 7241T-I 5. a / 1.09 . . Ji

(1 b f

11

55% ci 300 155 11 I f 72

11 k !

11 di 11 mi

18 4.1

11 e! 15-20/25 I( f I 11 n; 2.2% 1 01

11 gi

I Pi

40

11 hi II 4:

11 i

105OC

11 r i

Aropol 7241T-I 5 A preaccelerated, thixotropic isophthalic resin offering excellent corrosion resistance for hand-lay and spray/projection lamination of fume hoods, ducts, tanks, pipes and for storage tank linings and repairs. Is also approved for use in contact with food stuffs. (FDA Title 21, CFR 177.2420.) Less resilient than Aropol 7334T-15. aj 1.08

..

11 b f

54% ci 131 11 I

11 k!

450 73.7

11 d! 1 mi

4.1

)I e! 1 nf

1 ;

13/25 f 2.4% 0 ;

11 g i II P!

45

1 hi II 41

11 i

Q~OC

11 r i

Aropol 7334T-15 A preaccelerated, low viscosity, thixotropic, resilient and corrosion resistant resin offering excellent wet-out, high impact strength and elongation with excellent crack and craze resistance. Can be used for hand-lay, spray/projection lamination and filament winding. a i 1.09 . .

11 b j

Ji

7334

11

54% ci 124 I

11 k j

11 ;

450 77.9

11 di 11 m

15 3.5

1)

ei

11 ni

16/25 f 2.9% o i

I]

11 g l II PI

i

40

11 hi II 41

11 i

92OC

11 r j

An unaccelerated, non-thixotropic version of 7334T-15.

ArOpOl D-I 663 A high reactivity, chemically thickenable, unaccelerated polyester containing up to 28% recycle content which performs well with low profile additives and exhibits consistent lot-to-lot thickening. Finds RTM, wetmoulding and pultrusion processing application for truck panels, structural parts and general purpose use.

1 ai

1 bi

70%

11 c i

2,050/25

di

30

1 e;

11 f i

10

11 g;

11 hi

i i i

Aropol (26585 A high reactive, thickenable, polyester for use in low profile and controlled shrink applications automotive Class "A" and general purpose press moulding - offering extended wet-out time.

-

Arotran Q 6038 A low profile, accelerated, low viscosity resin designed for RTM application, offering excellent surface quality and thermal resistivity, with a high Barcol.

154

- Ashland Chemical Company Arotran Q 6530 A low viscosity, accelerated,, low profile resin for RTM application offering excellent surface quality and thermal resistivity, with a high Barcol.

Arotran 50422-10 A low viscosity, preaccelerated, low profile resin designed for RTM application and offering excellent surface quality and dimensional stability. a; J. .i

u ei 11 n j9/25

11 bi 52% 11 c i 175 11 di 11 k i ]I I j 11 mj

1.06

11 f i 1 oi

178

u 11gjp.i

90

1 hi 11 q i

ii 7.9

1100~

11 r i

2%

Arotran 50422-50 A low viscosity, preaccelerated, low profile resin designed for RTM application and offering excellent surface quality and dimensional stability.

Envirez 6215 A high viscosity version of Envirez 8030 for further description see below.

-

ai .. J i

11 b i

68%

11 k i

1 ci 95

5,000125 11 di 19 11 ei 11 I i 60 11 mi 3.65 1 n i

1f i

u

4.3

0;

1 gi II Pi

48

11 hi

n qt

11 i i 122% 1r;

Envirez 8030 A high-reactivity, chemically thickenable, unaccelerated polyester containing up to 40% recycle content, which performs well with low profile additives and exhibits consistent lot-to-lot thickening. Finds RTM, wetmoulding and pultrusion processing application for truck panels, structural parts and general purpose use.

I ai

I] b i

62%

1 ci

1210/25

[I dl

17

11 ei

11 f i

3.5

N gi

1 hi

uii

Hetron 92FR A preaccelerated, low viscosity, thixotropic halogenated and heat resistant polyester with a low flame spread (ASTM E-84 ~25). Suitable for hand-lay, spray/projection lamination and filament winding in the manufacture of for example, hoods and ducts for handling gases and vapours. Can also be used for architectural and modular applications as well as a rigidizing materials for acrylics. a; 1.28 , :

1 bi

66% 83

11 k i

ci

1 Ij

525 55

]I di 11 mi

4.1

11 e! 11 n i

21/25 11 f i 1.4% 11 o!

11 g! Pi

45

11 hi

n qi

1i i

82OC

1r i

Hetron 99P A preaccelerated, thixotropic corrosion resistant halogenated flame retardant, isophthalic, suitable for handlay-up or spray/projection lamination in the manufacture of for example ducts, hoods, blowers and fans, operating at elevated temperature. Achieves as formulated, a flame spread of ~ 7 5 and , e25 (ASTM E-84 Tunnel Test), with a 3% antimony trixoxide addition. Not as corrosion and heat resistant as the 197 series. (Hetron 197AT-P + 3% antimony trioxide offers Class 1 flame spread plus excellent corrosion and heat resistance.)

ai . . 1.23

11 bi

60% 11 c i 500 79.2 11 I i 51.7

11 k j

11 di 11 mi

25 4.1

11 el 11 n!

u f!

22/25 1.5% 11 oi

u 9; u Pt

11 hi II qi

11 i i 92OC Ir i

continued: 155

Databook - Section 08 :Unsaturated Polyester Resins For Laminating & Associated Purposes Ashland Chemical Company - continued: Hetron 197AT-P A preaccelerated, low viscosity, thixotropic halogenated polyester offering high heat resistance and excellent corrosion resistance to acidic and oxidising environments. Achieves ASTM E-84 Class 1 with 3% antimony trioxide or 4% antimony pentoxide. Suitable for hand-lay or filament winding in the manufacture of tanks, pipes, pumps, scrubbers etc. handling highly corrosive gases, vapors and liquids where a high degree of flame retardancy is required.

Hetron 197P A preaccelerated, low viscosity, thixotropic, halogenated flame retardant polyester offering high heat resistance and excellent corrosion resistance to acidic and oxidising environments. Achieves ASTM E-84 Class II rating with 5% antimony trioxide. Suitable for hand-lay, spray/projection and filament winding for the manufacture of tanks, pipes, pumps, stacks, scrubbers and other equipment handling highly corrosive gases, vapours and liquids.

197-3 197A 197L

An unaccelerated version of 197P. A toughened, crack/craze resistant version of 197-3 An unaccelerated, non-thixotropic version of 197P.

Hetron 197RT An unaccelerated, low viscosity, chemical and heat resistant polyester for resin transfer moulding.

Hetron 604T-20

A preaccelerated, low viscosity, thixotropic flame retardant isophthalic that exhibits excellent wet-out and a flame spread of e25 (ASTM E-84) with 3% antimony trioxide (or antimony pentoxide) or 50 without antimony. Has good resistance to mildly corrosive fumes. (Hetron 99P is recommended for fume handling applications operating at elevated temperature.) Can be employed for hand-lay, spray/projection lamination and filament winding, for mouldings required by the transporation, marine, electrical, mining and construction industries. Aropol 7334T-15 is a non flame retardant alternative.

Hetron 625P A preaccelerated, low viscosity, thixotropic halogenated flame retardant polyester (ASTM E-84 Class 1, e25 flame spread without the addition of antimony trioxide), offering fast wet-out and fast cure and good heat resistance.

Hetron 692TP-25

A preaccelerated, low viscosity, corrosion resistant, thixotropic, halogenated flame retardant polyester with excellent flame retardant characteristics (ASTM E-84 Class 1, i.e. e25 flame spread, with 3% antimony troxide). Can be formulated to pass MIL-R-2160D (ships), Grade A and MIL-R-7575C Grade A & 6. Suitable for hand-lay and filament winding.

156

- Ashland Chemical Hispania Hefron FR 620T-20 A low viscosity, preaccelerated, thixotropic flame retardant polyester (ASTM E-84 <25 without antimony trioxide) offering excellent wet-out and low drainage for the hand-lay, spray/projection deposition and filament winding for products required by the transportation, electrical, mining and building-construction industries.

Hefron FR 640T-20 A low viscosity, preaccelerated, thixotropic flame retardant polyester (ASTM E-84, <25 flame spread Class 1 - with 3% antimony trioxide or pentoxide, or <75 Class 2 - without either addition), offering excellent wetout and low drainage for use in hand-lay, spray/projection and filament winding in the manufacture of articles for the transportation, mining, electrical and building-construction industries.

-

-

Formerly Sier SA

- Sociedad ltalo Espanola De Resinas S A

FS-I 0 An unaccelerated, low reactivity orthophthalic for general purpose use.

FS-30 An unaccelerated, high reactive orthophthalic suitable for the manufacture of components exposed to foodstuffs. aj

..

11 bl

68% 90

11 k i

1 d f 30 11 e f 11 mi 3.9 11 n!

c f 1200mPa.s

11 I i

60

12/25 2% 11 o!

1f ;

6

1 gi

u P1

60

11 hi II qi

1 i j 85OC 11 r (

FS-31 An unaccelerated, high reactive orthophthalic offering high temperature resistance and good mechanical

properties.

FS-610 An unaccelerated medium reactive orthophthalic for general purpose use.

FS-1900 An unaccelerated, medium viscosity, low reactive, orthophthalic for general purpose use.

FS-1902

As for FS-1900,but exhibiting a lower viscosity.

FS-1903

A preaccelerated version of FS-1900.

c. 300mPa.s

continued: 157

Databook - Section D8 : Unsaturated Polyester Resins For Laminating & Associated Purposes Ashland Chemical Hispania - continued: FS-1913 A preaccelerated, thixotropic low reactive orthophthalic offering rapid mould turn round.

FS-1923 A preaccelerated, thixotropic, low reactive orthophthalic. ai

, :

11 b i

61% 11 ci 6OOrnPa.s 11 d i 28 110 11 I 60 11 rni 4.0

11 k f

11 e! 11 n i

25/25 1.5% 11 o i

11 f i

11 g i

u Pi

60

11 h i I 4:

11 i f 7OoC 1r i

11 i 7OoC 11 r !

FS-1930 An unaccelerated, thixotropic, low reactive orthophthalic.

FS-1933 A preaccelerated, thixotropic, low reactive orthophthalic offering rapid demould times. ai .. J i

11 b j

61% 11 c f 6OOmPa.s 110 1 I 60 11

1 kj

11 d j

28 4.0

11 ei 11 n j

20/25 1.5% 11 O f

1f i

11 g j II Pi

60

)I h f II 4:

11 f

11 g i II P i

60

11 h i II 41

A UV stabilised version of FS-1933.

FS-1943

FS-1953 A preaccelerated, thixotropic, low reactive orthophthalic. ai

, :

11 bi

61% 11 ci 6OOmPa.s 1 d f 28 110 I] I f 60 11 mi 4.0

11 k i

11 ei 11 n i

25/25 1.5% 11 0 1

ii

7OoC

11 r i

FS-1963 A white pigmented, preaccelerated, thixotropic, low reactive orthophthalic.

FS-3159 An unaccelerated, high reactive orthophthalic offering high mechanical properties.

FS-3900 An unaccelerated, high reactive orthophthalic for general purpose use offering good mechanical properties.

.:

11 k i

90

11 I i

60

11 mi

3.9

11 ni

2%

11 o i

u Pi

qi

11 r i

- Ashland Chemical Hispania FS-3903 A preaccelerated, high reactive, short cure cycle, general purpose orthophthalic.

FS-3910 An unaccelerated, high reactive, low viscosity orthophthalic offering good reinforcement wet-out.

Identical to FS-3910.

FS-3913

FS-3920 An unaccelerated, high reactive, low viscosity orthophthalic offering quick de-mould times.

FS-3923 A preaccelerated and thixotropic, high reactive, short cure cycle, orthophthalic for general purpose use.

FS-3930 A high reactive, thixotropic orthophthalic for general purpose use.

FS-3933 A preaccelerated, thixotropic, high reactive orthophthalic for general purpose use. ai

..

11 b ]

60%

1 k!

90

11 c ; 11 I

11 d i 30 1 e; 11 mi 3.9 11 n j

5OOmPa.s 60

15/25 2%

1f i

1 oi

11 gi II Pl

60

11 hi II 4;

11 i j 8OoC 11 r i

FS-3940 A high reactive, short cure cycle UV stabilised orthophthalic designed for continuous lamination.

FS-3943 A preaccelerated, UV stabilised, high reactive orthophthalic for the manufacture of flat sheets. ai

b]

f :

61% 1 k i 90

u ci 11

300mPa.s 11 d i 30 I i 60 11 mi 3.9

11 e: 11 n i

15/25 I] f 2% 10:

i

11 g!

60

II Pi

11 h i II 4:

1 i 8OoC 11 r /

FS-3963 A preaccelerated, paraffinated, high reactive orthophthalic of low viscosity offering good reinforcement wetout. ai

.:

11 bi

55% 1 c! 200mPa.s 11 d! 30 90 1 I i 60 1 m/ 3.9

1 ki

]I e!

I] ni

I]

20/25 f 2% 1 0 :

i

]I g i II Pi

60

11 h!

I1 4;

uii

8OoC

11 r i

continued: 159

Databook - Section 0 8 :Unsaturated Polyester Resins For Laminating & Associated Purposes Ashland Chemical Hispania - continued: FS-6902 An unaccelerated medium reactive orthophthalic for general purpose use.

FS-6903 A preaccelerated, medium reactive orthophthalic of low viscosity offering good reinforcement impregnation.

FS-6912 An unaccelerated, medium reactive orthophthalic of low viscosity for general purpose use.

FS-6930 An unaccelerated, medium reactive, orthophthalic, formulated thixotropic to resist drainage on vertical surfaces. ai .. J i

11 bj

60%

11 k i

80

11 ci 11 I

6OOmPa.s 1 dj 30 70 1 mi 3.7

11 e ! 11 ni

15/25 2%

11 o i

1f

9

1 g: II Pi

60

1 hi II q!

11 i i 75% 1r !

A preaccelerated version of FS-6930. e. 18/25

FS-6933

FS-6942 An unaccelerated, UV stabilised, medium reactive orthophthalic suitable for the manufacture of continuous sheeting.

FS-6963 A preaccelerated, parafinated, medium reactive, orthophthalic. a!

.. I!

1 b:

1 c i 3OOmPa.s 1 d i 30 11 e : 75 1 I i 70 11 mi 3.7 11 ni

62%

11 k i

18/25 2%

1 oi

1fi

11 gi

u Pi

60

11 hi

I

qi

11 i i

750~

ri

IS-0841 An unaccelerated, semi-flexible isophthalic for the manufacture of pipes and other tubular products.

IS-4011 An unaccelerated isophthalic resin for general purpose use.

IS-4041

An unaccelerated UV stabilised isophthalic suitable for the manufacture of components exposed to foodstuffs.

160

- BIP Limited IS4911 An unaccelerated, medium viscosity isophthalic for general purpose application.

IS4930 An unaccelerated, thixotropic isophthalic for general purpose use.

IS4933 A preaccelerated, thixotropic isophthalic suitable for spray deposition and the manufacture of marine items.

ISG-0818 An unaccelerated isophthalic resin specially formulated for the manufacture of components in contact with petroleum spirits.

Beetle 807X Pre-accelerated, low viscosity fast wet-out, thixotropic, low styrene emission, orthoDhthalic resin, offering good interlaminar adhesion, high heat resistance, improved water resistance and 'low exotherm enabling thick sections to be fabricated by either hand-lay or spray/projection techniques; colour change on cure. Approved for food contact applications, Lloyd's and Det Norske Veritas.

Beetle 810 Unaccelerated, medium viscosity, high quality orthophthalic resin suitable for comDression mouldinn, pultrusion and the manufacture o f polyester moulding compounds offering high reactivity,' fast cure, excellent mechanical strength at elevated temperatures, resistance to mild chemical reagents and fully pigmentable.

Beetle 811 Pre-accelerated low profile, highly reactive, fast curing, orthophthalic resin of limited pigmentability for pultrusion and compression moulding, offering mouldings with excellent surface finish, good paintability and heat resistance.

Beetle 812 Medium viscosity, unaccelerated system, suitable for DMC/SMC manufacture, giving exceptionally high quality surface finish with low profile additive compatibility, highly reactive and fully pigmentable.

continued:

161

Databook - Section 0 8 :Unsaturated Polyester Resins For Laminating & Associated Purposes BIP Limited - continued: Beetle 836X

Non-accelerated, low viscosity, efficient wet-out, thixotropic, LSE orthophthalic resin, for hand-lay or spray/projection fabrication, offering good interlaminate adhesion, medium to long pot-life with a medium cure in thick sections, & improved water resistance. Approved by Lloyd's and Det Norske Veritas.

Beetle 859

High performance, non-accelerated, low viscosity, high reactivity, orthophthalic resin, fully pigmentable and suitable for RTM or cold-press moulding, providing mouldings of excellent mechanical strength at elevated temperatures and resistance to mild chemical reagents.

Beetle 865E A general purpose pre-accelerated, very low viscosity, thixotropic, orthophthalic resin offering long pot-life, fast cure and rapid, efficient wet-out for both hand-lay and spray/projection lamination. Approved by Lloyd's.

(Equivalent to Hetron 197-3) Non-accelerated, thixotropic, low viscosity HET acid based resin offering a good pot-life with a medium cure rate, which combines superior chemical resistance at elevated temperature, with some degree of fire retardancy. A high level of fire retardance can be obtained with antimony trioxide additions. Beetle 870

ai 1.13 11 b i 56% 11 c ] 4p/25 ]I di 15 11 ei 18/20 j i 16mg/24 11 k i 62 11 I f 44 11 mi 3.6 11 n f

1f j 11 o ]

11 gi

u P!

50

11 hj 7% 1 i f 115OC II q ! 11 r !

Beetle 881X

Pre-accelerated, low viscosity, thixotropic, orthophthalic, LSE resin offering rapid and efficient wet-out with short-medium pot-life, very rapid curing with pronounced colour change and good interlaminate adhesion. Approved by Lloyd's.

Beetle 887X

Pre-accelerated, low viscosity, efficient and rapid wet-out, thixotropic, LSE, orthophthalic resin offering a long pot-life and a low exotherm in thick sections, with good interlaminate adhesion and improved water resistance; colour change on catalyst addition and cure. Approved by Lloyd's and Det Norske Veritas. a; j

i

1.10 9mg124

11 b i 56% 1) c i 2.511125 11 di 17 11 e f 73/20 11 f i 11 k! 90 11 I i 47 11 mi 3.7 11 n! 2.2% 1 o!

159

11 g! 11 p t

50 93

11 hi 9% 1 i 63OC 11 q ! 6.5 11 r !

Beetle 888E

Pre-accelerated, very low viscosity, thixotropic, orthophthalic, general purpose resin suitable for hand-lay and spray/projection lamination, with long pot-life and very rapid cure at low temperature offering rapid and efficient wet-out with low exotherm in thick sections, plus colour change indicating cure and approved by Lloyd's.

162

- BIP Limited Beetle 888X Pre-accelerated. low viscosity, thixotropic, LSE, with a fast, low temperature colour change cure and a long pot-life, orthophihalic resin, offering good interlaminar adhesion and water resistance. Approved by Lloyd’s and Det Norske Veritas.

Beetle 889X White pigmented, pre-accelerated, low viscosity, thixotropic, orthophthalic resin, offering extremely low styrene emission with good interlaminate adhesion and improved water resistance; provides rapid and efficient wet-out in both hand-lay and spray/projection moulding with low exotherm in thick sections. Approved by Lloyds and Det Norske Veritas, Grade 2. ai 1.10 11 b i 56% 11 c i 2.6~125 11 di 17 11 e ; 34/20 j 10mg/24 k! 90 11 I i 47 1 mi 3.7 11 n’i 2.0%

11 f

I] o!

159

1 gi 11 p !

50 83

9% 11 i f i q i 5.7 i

11 hi

63OC

ri

Beetle 890 Preaccelerated, low viscosity, thixotropic isophthalic resin, suitable for hand-lay and spray/projection lamination, combining long pot-life with very rapid cure at low exotherm in thick sections, and offering rapid, efficient fibre wet-out, a low temperature cure and a colour change on curing. Approved by Lloyd’s Register of Shipping.

Beetle 8026 Unaccelerated, translucent, orthophthalic resin suitable for translucent sheeting applications.

Beetle 8115 Low profile orthophthalic resin for pultrusion, and compression moulding, giving excellent surface finish, low shrinkage and offering good paintability, highly reactive and heat resistant but with limited pigmentability.

Beetle 8128 Non-accelerated, high viscosity, high reactivity, fast curing, orthophthalic fully pigmentable resin suitable for compression moulding and pultrusion, and offering excellent mechanical strength and elevated temperatures with resistance to mild chemical reagents.

Beetle 8134 Non-accelerated, low viscosity, non thixotropic flexible resin designed for use with rigid resins to impart improved impact resistance and flexibility. In large castings an addition of up to 30% of 8134 reduces the tendency to crack on exotherm, or to minimise damage to embedded articles.

I ai

1.10

11 b!

67%

11 c f

11

3.5~125 di

12

I

Beetle 8135 Pre-accelerated, low viscosity, non-thixotropic, UV-stabilised orthophthalic resin offering rapid and efficient wet-out, tough, high performance with good outdoor durability and particularly suitable for the moulding of highly translucent silos and roofing panels by filament winding, hand-lay and spray/projection deposition. Cures tack-free and with a colour change on catalyst addition. a: 1.11 j ! 30mg17

continued:

11 b! 61% 11 ci 3~125 11 di 25 11 ei 18/20 11 f ! 11 k i 110 11 I i 48 11 mt 4.1 1 ni 2.2% u oi

1 g!

u P!

45

11 hf 8% 11 i i 7OoC II qi 1rt 163

Databook - Section D8 :Unsaturated Polyester Resins For Laminating & Associated Purposes

BIP Limited - continued: Beetle 8137 Non-accelerated, low viscosity, high reactivity, fast curing, fully pigmentable orthophthalic resin offering resistance to mild chemical reagents, particularly suitable for resin concrete applications.

Beetle 8143 Unaccelerated, medium viscosity, highly reactive, orthophthalic resin, suitable for compression moulding and pultrusion, providing mouldings with excellent mechanical strength at elevated temperatures, resistant also to mild chemical reagents.

I a;

1)

1.12

bi 66%

11 c !

11

8~125 df

30

1 ef

9/82

I

Beetle 8171 White, filled, pre-accelerated, low viscosity, thixotropic, fast-curing, LSE resin offering efficient wet-out in both hand-lay and spray/projection deposition, for the reinforcement of acrylic baths. ai

.. Ii

1.44

11 b j 70% 11 c f 3.8p/2511 di 20 11 e! 1/20 11 f i 11 k j 42 11 I j 14 11 rnj I] n f 8.8% 11 01

n

gi

50

II Pi

11 hi

u

4% q!

1 i i 62O 11 r i

Beetle 8176 A white, pre-accelerated, thixotropic, fast curing resin for the reinforcement of acrylic baths. ai 1.11 11 b f 56% 11 c i j f 10mg/24 11 k i 91 11 I j

49

11 'dj 20 11 el 1/20 11 f j 11 m 3.9 11 nl 11 0:

11 gf II Pi

50

1 hf 9% 11 i i 62OC II 41 11 r i

Bettle 8193 Reduced flammability resin based on DBNPG.

I a:

j

i

12mg/24

11 bi

70%

1 ki

68

1)

c i 19.5p/25 1) d ]

11 I i

32

11 mi

27

6.3

1 ef

11 nj

45/25

I

1 0:

I Pi

II q i

11 r j

Bettle 8333 Non-accelerated, non-thixotropic, low viscosity, orthophthalic general purpose resin, suitable for hand-lay, spray/projection and RTM moulding, offering medium-long pot-life with medium cure, rapid and efficient fibre wet-out, excellent all-round mechanical properties and good water resistance.

Beetle 8608 Non-accelerated, medium viscosity, highly reactive, fast curing, fully pigmentable isophthalic resin particularly suitable for compression moulding and pultrusion, offering excellent mechanical strength at elevated temperatures and resistance to mild chemical reagents.

164

- Blagden Manufactured Chemicals Beetle 8733 Non-accelerated, non-thixotropic, low-viscosity, orthophthalic, general purpose resin suitable for hand-lay and spray/projection lamination, offering medium-long pot-life with medium cure at low exotherm in thick mouldings, and rapid, efficient wet-out. Approved by Lloyds.

Beetle 8797 Non-accelerated, non-thixotropic, high viscosity resin intended for the production of colour pastes, or as a flexibilising additive to rigid resin types.

I ai

1.15

11 bi

99.5%

11 c !

25~1251 dj

I

14

Beetle 8877 Modified white, orthophthalic, pre-accelerated, non-thixotropic resin of low viscosity, developed for RTM applications and formulated to achieve BS 476 Class 1 flame fire rating.

81-1 3-93 A low viscosity flexible orthophthalic fire retardant (Class 3) resin with a refractive index matching glass, and for the manufacture of translucent sheeting.

ai ..

J i

11 bi 61% 11 c j 170 1 dj 11 ki 83 11 I i 45 1 mi

11 e; 3.0

]I

9/25

n; 3.0

1fi 11 oi

11 g f

35

1 hi

I

I Pi

11 i f

6OoC

Ir i

qi

81-1854 An unaccelerated, tough, high reactivity, orthophthalic resin designed for pultrusion.

81-4375E A medium reactivity, general purpose, LSE, fast cure, preaccelerated and thixotropic general purpose orthophthalic resin designed for hand-lay and spray/projection lamination.

81-4377E A medium reactivity, general purpose, LSE, preaccelerated and thixotropic general purpose orthophthalic resin designed for hand-lay and spray/projection lamination, approved for marine application by Lloyd's and for water systems by the National Water Council.

82-1464 A medium reactive, orthophthalic, unaccelerated resin designed for filament winding. aj .. J i

11 b j 62% 11 c i 11 k j 110 11 I

j

370 11 dj 55 11 mi

11 e f 3.1

35/25 3.0%

11 nj

11 f f 11 o j

11 gj

I

Pi

45

11 hi II si

11 i i

750~

Ir f

continued:

165

Databook - Section 0 8 :Unsaturated Polyester Resins For Laminating & Associated Purposes Blagden Manufactured Chemicals - continued: 82-14-1 04 A low viscosity orthophthalic resin specially formulated for RTM. a; .. Ji

11 b; 58% 11 c i 11 k [ 100 11 I

(

130 1 d j 60 I] mj

11 e [ 3.0

13/25 2.0%

11 ni

11 f j 1 01

1 gj I1 Pi

40

11 hi II 41

11 i j

11

65OC ri

82-4300 A medium reactivity, general purpose, LSE, low exotherm, preaccelerated and thixotropic orthophthalic resin, designed for hand-lay and spray/projection lamination, approved for marine application by Lloyd’s.

824340 A rapid cure, general purpose, preaccelerated orthophthalic resin, designed for the manufacture of translucent sheeting. a. j. Ji

11 b: 58% )I c [ 135 I[ d: 11 k j 103 11 I i 59 11 mi

1 e; 2.8

18/25 2.5%

11 n;

II f j 10:

1I g! II Pi

40

11 hj

I 9:

II i j

65OC

11 r j

824343E A medium reactivity, general purpose, low viscosity, LSE, preaccelerated and thixotropic orthophthalic resin, designed for hand-lay and spray/projection lamination, approved for marine application by Lloyd’s.

82-4363W A medium reactivity, general purpose, white pigmented, LSE, preaccelerated and thixotropic orthophthalic resin, designed for hand-lay and spray/projection lamination, approved for marine application by Lloyd’s.

ai ,.

11 b i 61% 11 c ! 1 k ( 90 11 I

600 11 d1 55 11 mf

11 e; 3.4

15/25

11 ni

1.7%

1) f i 11 0 1

11 gi

42

1 hi

I 4:

Pi

1i

6OoC

11 r i

82-4560 A low reactivity, general purpose, LSE, low exotherm, long gel time, preaccelerated and thixotropic orthophthalic resin,-designed for hand-lay and spray/projection-lamination,approved for marine application by Lloyd’s. aj

..

1 b i 58% 11 C: 470 1) d f 1 k j 86 11 I ! 55 11 mi

11 e! 3.4

42/25 1.9%

11 n i

11 f f 11 0:

11 gi I1 Pi

40

1)

hi

1I 41

11 i i 6OoC 11 r i

84-5072 An isophthalic, preaccelerated and thixotropic resin for spray/projection lamination, approved for marine application by Lloyd’s. ai .. J i

..

166

I( b j 57% 11 c j 600 1 dj 1 k [ 117 1 I j 66 )I mj

1 ej 3.5

15/25

1 ni

3.5%

1f

11 oi

1 gj 1I Pi

45

1 hj

’

II 41

1 ij

78OC

11 r (

- Cook Composites & Po/ymers 84-51 00 A preaccelerated, thixotropic, isophthalic resin for hand-lay and spray/projection deposition, offering chemical resistance.

.:

II Pi

14:

.. 85-7600 A preaccelerated, thixotropic, filled, general purpose, flame retardant (Class I ) orthophthalic resin for handlay and spray/projection deposition. ai

..

Ji

11 b! 71% 1 c j 11 k ! 80 1 I

700 11 dj 60 11 mi

11 e ! 15/25 11 f j 11 n i 1.8% 11 o j

2.8

11 gl II P!

40

11 h!

u 4:

11 i 1 7OoC 11 r j

StVROl 040-4112 A preaccelerated resilient isophthalic resin, offering extremely fast wet-out, moderate trim time, excellent crack and craze resistance, mild corrosion resistance and exdellent retention of physicals after water boil, formulated for hand-lay and spray/projection lamination.

sfVRO/ 040-4221 A preaccelerated orthophthalic resin offering low exotherm characteristics enabling thick laminates to be manufactured by hand-lay or spray/projection deposition, without excessive exortherm.

stVRO/ 040-4232

Similar to Stypol 040-4221 but offering a shorter gel time. e. 15/25. stVRO/ 040-4280 A preaccelerated resilient, isophthalic resin offering extremely fast wet out and moderate trim time, excellent crack and craze resistance, mild corrosion resistance and excellent retention of physicals after water boil, formulated for hand-lay and spray/projection lamination. FDA approved,

continued: 167

Databook - Section D8 :Unsaturated Polyester Resins For Laminating & Associated Purposes

-

Cook Composites 8, Polymers continued: SfvDO/ 040-4331 A preaccelerated, thixotropic isophthalic resin offering high impact resistance, good heat resistance and outstanding chemical resistence for the hand-lay, spray/projection manufacture of corrosion resistance products. a. .i 1.09 Ji

1 bi

1 ki

ci 123

1 Ii

4OOcps 62

11 d l 1 e! 11 mj 3.7 11 n j

27/25

11 o i

040-4332

A variant offering a different gel time. e. 23/25

040-4334

A variant offering a different gel time. e. 18/25

11 f f 190

11 gi 11 pi

48

124

11 h i 1qf

6.9

11 i f 87OC 11 r i 2.0%

StvRO/ 40-2806 A fast wet-out, non-draining resin offering excellent cure in thin sections and designed for hand-lay or spray/projection lamination in the manufacture of flame resistant laminates (e.g. VEI 8, VE2 when tested by UL 94 Vertical Burning Test or Class 11, E-84 Tunnel Test - Class I with the addition of 3 - 5% antimony oxide). a; . . 1.32 Ji

11 b j

\I kj

91

11 ej 11 c i 45Ocps 11 d j 1 I ; 52 11 m:, 3.7 11 nl

11 f j 1gi 1 0 ; 154 11 p ]

18-25/25

38

11 hj

I]

qj

11 i f 6.1

I]

63OC

rj

StvDol 40-48 Series A range of preaccelerated, thixotropic, LSE resins, designed for the marine industry as well as general handlay and spray/projection applications, offering superior glass wet-out, low exotherm, low shrinkage, excellent secondary bonding and resistance to fibre glass pattern print-through.

The following reactivity tabulation (25OC)for the resins in this series is provided in the manufacturer's literature.

Endvne 20 A general purpose, preaccelerated, low reactive, thixotropic, LSE (ultra-low), DCPD modified orthophthalic polyester suitable for hand-lay and spray/projection lamination.

Endvne 22

A general purpose, preaccelerated, low reactive, thixotropic, LSE (ultra-low), DCPD modified orthophthalic polyester suitable for hand-lay and spray/projection lamination.

[

ai

11 b i

5448%

11 c i

2.0-2.2dPaS

11 d i

11 e :

7-15/25

11 f

1 g ] 40-45

I

Endvne 30 A general purpose, preaccelerated, medium reactive, thixotropic, LSE (ultra-low), DCPD modified orthophthalic polyester suitable for hand-lay and spray/projection lamination.

168

- Cray Valley Endyne 50 A general purpose, preaccelerated, medium reactive, thixotropic, LSE (ultra-low), DCPD modified orthophthalic polyester suitable for hand-lay and spray/projection lamination.

11 b i

I a!

11 c i

5448%

2.0-2.5dPaS

1 d]

1 e]

I

30-40/20

Endyne 8801 A white pigmented, preaccelerated, medium reactive, thixotropic DCPD orthophthalic reduced styrene LSE resin, offering a high rigidity, a high heat distortion temperature and rapid curing, with excellent adhesion in the reinforcement of acrylic baths and shower trays.

Norsodvne EN13 A general purpose, preaccelerated, medium reactive, LSE thixtropic orthophthalic resin offering good interlaminar adhesion for hand-lay and spray/projection lamination.

11 b l

I ai

56-60%

11 ci

2.5-2.9dPa.S

11 ej

11 d ]

18-23/20

11 f i

11 g ] 45-50

I

Norsodyne EN20 A general purpose, preaccelerated, low reactive, LSE, thixotropic orthophthalic resin offering good interlaminar .adhesion for hand-lay and spray/projection lamination. (Short gel time for spray lay-up.) a]

..

11 b ]

11 c j

5449%

11 k j

J i

78

11 d] 11 m]

2.3-2.7dPaS

1 Ij

56

3.9

]I e ; 11 n i

1fi 11 g ] 1 0 ; 212 1 p

9-13/20

2.6%

4045 93

11 hl 11 q

6.8

11 i j 62OC 1r j

Norsodyne EN30 A general purpose, preaccelerated, low reactive, LSE, thixotropic orthophthalic resin offering good interlaminar adhesion for hand-lay and spray/projection lamination. Fast cure for hand-lay.

Norsodvne EN31 A general purpose, preaccelerated, medium reactive, LSE, thixotropic and pigmented orthophthalic resin offering good interlaminar adhesion for hand-lay and spray/projection lamination. A white pigmented version of EN30.

I ai

1 b]

56-60%

11 c!

2.3-2.7dPaS

11 d f

11 e !

16-20/20

I

Norsodyne EN50 A general purpose, preaccelerated, low reactive, LSE, thixotropic orthophthalic resin offering good interlaminar adhesion for hand-lay and spray/projection lamination. Long pot-life for thick sections.

I ai

1 bi

5448%

11 ci

2.0-2.5dPaS

11 di

11 e ]

70-85/20

1

Norsodyne QC2 A general purpose, preaccelerated, medium reactive, thixotropic orthophthalic, Lloyd’s Registry approved resin offering moderate chemical and heat resistance, good wet-out and rapid cure for hand-lay and spray/projection lamination.

continued: 169

Databook - Section 0 8 :Unsaturated Polyester Resins For Laminating & Associated Purposes Cray Valley - continued: Norsodvne QC6 A general purpose, preaccelerated, medium reactive, thixotropic orthophthalic, Lloyd's Registry approved resin offering moderate chemical and heat resistance, good wet-out and rapid cure for hand-lay and spray/projection lamination.

Norsodvne 6343.218LP A white pigmented, low reactive, LSE orthophthalic resin offering medium cure rate, good air release and low exotherm in thick sections, and suitable for hand-lay and spray/projection lamination. ai , :

11 b !

56-60% 78

I[ ki

I[ c f

11

2.0-3.0dPaS d ( 56 mi 3.9

[I I (

11

11 e f [I n (

16-20120 2.6% o!

11

[I

f i 212

11 g l 11 p (

1

40-45 h f 93 11 q f

6.8

[I i f 63OC 11 r f

Norsodvne 6344.040 A filled, medium reactive, general purpose, thixotropic, orthophthalic resin offering a fast cure rate and good filler stability and designed for cold press moulding and RTM.

I a:

11 b:

67-73%

(1 c (

11 dj

3.0-3.5dPaS

(1 ej

I

7-12/20

Norsdvne 6344.343 A preaccelerated, filled, medium reactive, thixotropic, orthophthalic resin offering a fast cure rate and good filler stability, and designed for cold-press moulding and RTM.

I aj

11 b (

67-71%

11 c j

I(

3.0-3.5dPaS

df

11 e (

I

6-8/25

Norsodvne 6345.21 3 A general purpose, preaccelerated, medium reactive, thixotropic orthophthalic, Lloyd's Registry approved resin offering medium chemical and heat resistance, suitable for boat construction.

Norsodvne 6347.007 A preaccelerated, medium reactive, non-thixotropic orthophthalic resin, offering excellent weathering properties, good wet-out and light transmission for translucent laminates and sheeting. .. Ii

[I

kj

105

I( I ;

51

11 n;

11 m

I PI

[I 0 ;

II q!

11 r :

Norsodvne 6356M A preaccelerated, medium reactive, filled, thixotropic flame retardant (6s 476 Part 7, Class 2) orthophthalic offering good wet-out in hand-lay and spray/projection lamination.

I aj

1 b(

66-70%

11 c (

3.2-3.7dPaS

[I

df

11 e (

I

6-11/25

Norsodvne 6357 A preaccelerated, medium reactive, thixotropic, flame retardant (BS 476 Part 7, Class 2) orthophthalic offering good wet-out and rapid cure in hand-lay and spray/projection lamination.

1 ai

11 b f

61-65%

11 c i

3.0-4.0dPaS

11 d j

11 e!

7-16/25

n

f (

u sf

11 h f

]I i i

85OC

I

Norsodvne 6357.D A preaccelerated, medium reactive, thixotropic, flame retardant (BS 476 Part 7, Class 2) orthophthalic resin for hand-lay and spray/projection lamination, (A longer gel time variant of 6357.)

I aj 170

11 b (

61-65%

11 c f

3.0-4.0dPaS

11 di

11 e (

13-32/25

I

- Cray Valley Norsodvne 6357L A preaccelerated, medium reactive, thixotropic, LSE flame retardant (BS 476 Part 7, Class 2) orthophthalic resin offering good wet-out and rapid cure in hand-lay and spray/projection lamination. (An LSE version of 6357.)

I aj

I] b (

11 c i

59-543.5%

3.5-4.5dPaS

11 d (

11 ej

1

8-21/25

Norsodvne 6367.007 An unaccelerated, medium reactive, non-thixotropic orthophthalic resin, offering excellent weathering properties, good wet-out and light transmission for translucent laminates and sheeting made by hand or machine.

Norsodvne 6367.008 An unaccelerated, medium reactive, non-thixotropic, fire retardant (BS 476, Part 3) orthophthalic styrene/methyl methacrylate resin, offering good weathering properties, good wet-out and light transmission for translucent laminates and sheeting made by hand or machine.

I aj

11 bi

56-60%

11 c i

1.6-2.2dPaS

I] e:

11 dj

10-15/20

]

Norsodvne 6370.002 An unaccelerated, high reactive, non-thixotropic, orthophthalic resin offering medium chemical and high heat resistance designed for cold press moulding.

11 b !

I a!

55-59%

11 c !

1.8-2.2dPaS

1 di

11 e !

25-30/20

I

Norsodvne 6370-040 A highly reactive, filled orthophthalic for pultrusion. ai

bi

..

1;

72% 11 c i 5dPaS 49 11 I f 25

11 kl

11 d i 1 m! 5.8 1 n j

hi

I

0.7% i o (

H q!

Pi

ii

90°C

11 r i

Norsodvne 6380.002 A white pigmented, preaccelerated, high reactive, thixotropic orthophthalic offering high rigidity, a high heat distortion temperature and rapid curing, with excellent adhesion in the reinforcement of acrylic baths and shower trays. aj

..

1 bi

I]

]I

56-60% 11 c j 2.0-3.OdPaS d f k i 84 11 I i 56 11 rn]

11 e; 11 n i

1f t

4-8/20

o:

1 g!

u Pi

48-52

11 h ;

I

qi

1i i

IOOOC

I ri

Norsodvne 6380.245 A white pigmented, filled, preaccelerated, high reactive, thixotropic orthophthalic offering high rigidity, a high heat distortion temperature and rapid curing, with excellent adhesion in the reinforcement of acrylic baths and shower trays. a! ..

11 b( 71.5-75.5% c i 11 k j 11 I j

4-5dPaS

1 mi

]I

dj

11 e ; 1 nj

4-6/20 oj

11 f j 110

1

11 g; f

45 65

1 hj

11 qi

1i ; 9 0 0 ~ 11 r i

Norsodvne 6386.004 A preaccelerated, low viscosity, high reactive, thixotropic orthophthalic, styrene/methyl methacrylate resin offering filler loading up to 50%, a high rigidity, a high heat distortion temperature and rapid curing, with excellent adhesion in the reinforcement of acrylic baths and shower trays.

continued: 171

Databook - Section 0 8 :Unsaturated Polyester Resins For Laminating & Associated Purposes Cray Valley - continued: Norsodyne 6386.250 A white pigmented, preaccelerated, high reactive, thixotropic orthophthalic, styrene/methyl methacrylate resin offering a high rigidity, a high heat distortion temperature and rapid curing, with excellent adhesion in the reinforcement of acrylic baths and shower trays.

..

Norsodvne 6395.211 A preaccelerated, medium reactive, isophthalic resin suitable for hand-lay and spray/projection deposition in the manufacture of pipes, ducting, tanks etc. where good chemical and heat resistance is required. Also suitable for applications in contact with food and oils etc. aj

.. Ii

11 b j

55-59% 1 c / 4-5dPaS 11 d j 100 Ij 65 11 rnj

11 k i

11

1 ej 11 n j

5-10/25 1 f j 1.3% 11 0 ; 204

1 gj

11 p j

45-50 108

u hj

11 qj

11 i j

I rj

90%

Norsodvne 6397.1 1I A preaccelerated, medium reactive, thixotropic, isophthalic resin for hand-lay and spray/projection deposition, offering medium heat and chemical resistance for general moulding and marine applications. Approved by Lloyd’s Registry.

I aj

11 b i

53-57%

11 c j

3.3-3.7dPaS

11 d i

]I e l

16-20/20

I

Norsodvne 6398.210 A preaccelerated, medium reactive, thixotropic, terephthalic/NPG resin offering good chemical and heat resistance, hydrolytic stability and good adhesion to PVC in the manufacture of chemical tanks, ducts, pipes. a;

..

11 b f

50-54% 1 C! 3.0-4.0/25 1 dj 78 1 I i 62 11 rnj

11 k l

1 e: 11 ni

1 fj 11 0:

15-20/25

11 gj I Pi

40-45

11 h i

II si

11 i i 115OC 1ri

Norsodvne 6417 A preaccelerated medium reactive, filled flame retardant system. (BS 476 Part 7, Class 1)

Norsodvne 6501 An unaccelerated, medium reactive, non-thixotropic, low shrinkage orthophthalic resin, designed for RTM. Recommended mould temperature 4OOC.

I aj 172

11 bj

58-62%

I] c j

2.3-2.7dPaS

11 di

11 e !

4-6/25

I

- DSMOBASFStructural Resins Norsodyne 6501.040 An unaccelerated, medium reactive, filled, thixotropic, low shrinkage orthophthalic resin, designed for RTM. Accelerated versions available.

1 a!

e ] 11-15/25

1

Norsodvne 6502 An unaccelerated, medium reactive, non-thixotropic, orthophthalic resin offering medium chemical and heat resistance and good mechanical properties, designed for RTM.

.. Norsodvne 16030V A high reactive, unaccelerated, chemical resistant tetrahydrophthalic resin.

Palatal A400 An unaccelerated, high reactive, isophthalic resin offering good chemical resistance.

A light-initiated cure, version. A UV stabilised version. An inhibited version for tropical application.

A4001 A400L A400N

. ,

A41ON A41OU

11 k !

150

11 I ]

85

]I

mj

3.95

1 n]

4.4-5.6%

11 o ]

Pi

1r:

II q l

An inhibited version for tropical application. An LSE version.

Palatal 420 An unaccelerated, high reactive, teraphthalic resin offering particular resistance to petroleum, where the methanol content is less than 15%. a: ..

Ji

11 b f 57% 11 c j 800 11 di 1) k i 145 11 I ! 85 11 mi

11 e /

3.8

11 ni

3.6%

11 f i 11 o i

u gPi; ,

1 hj I qj

]I i i

1r i

continued: 173

-

Databook Section 0 8 :Unsaturated Polyester Resins For Laminating & Associated Purposes DSMoBASF Structural Resins - continued:

Palatal P4 An unaccelerated, medium reactive, non-thixotropic orthophthalic resin with a wide application. ai

.:

P4L P4N P4LN P4U P4T P4TV P4TN

11 b i 64% I] c i 600 I] di 11 k i 110 I] I i 70 11 mi

11 ei 4.3

11 n f

fi 2.0% i o !

I si.

11

Pi

hi

I

i i !I!

]I

ri

A UV stabilised version. An inhibited version for tropical application. A UV stabilised and inhibited (tropical application) version. An LSE version. A thixotropic version with changed viscosity (c 350) and a different non-volatile content (b 58%). A preaccelerated and thixotropic version. An inhibited (tropical application) and thixotropic version.

Palatal P5 An unaccelerated, medium reactive, non-thixotropic orthophthalic resin with a wide application. ai .. Ji

P5N

1 bi 65% 11 c i 750 1 di 11 k j 145 11 I j 70 11 mi

11 ei 4.3

1 ni

2.2%

11 f i 11 o j

11 hi II q i

11 s f . Pi

11 i i 11 r i

An inhibited version for tropical application.

Palatal P6 An unaccelerated, high reactive, non-thixotropic orthophthalic resin with a wide application. ai .. J i

P6U

I( b j 66% 11 c ; 1000 11 dj 11 k i 150 II i 90 11 mi

11 ei 4.65

11 n i

2.8%

11 f 11 0:

I si,

11 hi 14

Pi

11 i j

11 r ;

An LSE version.

Palatal P50 An unaccelerated, medium reactive, non-thixotropic orthophthalic resin.

P501 P50N P50T

A light-initiated cure, version. An inhibited version for tropical application. A thixotropic version with changed viscosity (c 420) and a different non-volatile Content (b 55%).

Palatal P51 An unaccelerated, high reactive, non-thixotropic teraphthalic resin, particularly suited to the manufacture of tanks, vessels and pultruded profiles, and compression moulding and RTM techniques. a;

..

1 bi 11 k i

66% 125

I\ ci

11 I i

1000 75

11 di

mi

3.25

1 e; 1 ni

5.4-5.7

I f ! o

11

Palatal P58 An unaccelerated, high reactive, non-thixotropic ortho/teraphthalic resin.

174

I si

,

Pi

1 hi

I

ii

q:

11 r i

- DSM&ASF

Structural Resins

Palatal P61 An unaccelerated, high reactive, non-thixotropic orthophtahlic resin.

An inhibited version for tropical application. A preaccelerated version.

P61N P61V

Palatal P69 An unaccelerated, high reactive, non-thixotropic orthophthalic resin exhibiting low water absorption and therefore very suitable for marine application, in addition to an otherwise wide use.

An LSE version.

P69U

Palatal P80 An unaccelerated, high reactive, non-thixotropic orthophthalic resin.

11 b i 58% 11 c i 155 u di 11 k j 145 11 I i 80 11 mi

ai

..

u si.

u e; 11 n i 4.2% 10: 11 f 1

4.0

Pi

1 hi

u qi

A UV stabilised version. b 62% c 265. A UV stablised and inhibited (for tropical application) version. b 63%

P80L P80LN

j j

1r t

1

c 330

Palatal U541T An unaccelerated, thixotropic, medium reactive, LSE orthophthalic resin particularly suitable for marine use and fabrication by spray/projection deposition.

A preaccelerated version.

U541TV

Palatal U542TV A preaccelerated, thixotropic, medium reactive, LSE orthophthalic resin particuarly suitable for marine use and fabrication by spray/projection lamination.

Palatal U596T An unaccelerated, thixotropic, high reactive, LSE orthophthalic resin particularly suitable for marine use and fabrication by spray/projection lamination.

A preaccelerated version.

U569TV

Svnolite 0020-N-1 An unaccelerated resin specifically designed for the manufacture of low shrink, SMC/BMC moulding compounds.

[

ai 1.14

11 b j

65%

11 c ;

10.5-11.5dP/25

1 dj

16-20

11 e!

1.5/130

f

ll si

1 hi

11 i i

1200~

continued:

175

I

Databook - Section 0 8 :Unsaturated Polyester Resins For Laminating & Associated Purposes DSMoBASF Structural Resins - continued: Svnolite 0175-N-1 A DCPD resin with good mechanical properties.

Svnolite 0423-N-2 An unaccelerated resin specifically designed for the manufacture of low shrink, SMC/BMC moulding compounds.

Svnolite 0618 4 - 1 An unaccelerated, non-thixotropic orthophthalic offering good mechanical properties.

Svnolite 1717-N-1 An unaccelerated, non-thixotropic, isophthalic with good thermal and chemical resistance.

I ai

1.10

1 bj

56.5%

11 c ]

3.0-3.7dP/25

11 d ] 6.5-9.5 11 e ]

37325

11 f

]

II g;

1 hi

11 i

105OC

I

I

1 hi

11 i i

62OC

1

Svnolite 1900-N-1 An unaccelerated, non-thixotropic, general purpose orthophthalic.

S vnolite 2020 -P-2 A preaccelerated, thixotropic, LSE, orthophthalic for general purpose use.

I ai

1.10

2020-P-1

11 b!

56.5%

11 c f

1.8-2.2125

11 d ]

14-20

11 ei

21/25

11 f i

91

Different reactivity version, gel time, e 16/25.

Svnolite 2273-X-1 An unaccelerated resin designed specifically for the manufacture of low shrink, SMC/BMC moulding compounds.

176

- Dulux Australia Svnolite 3355-W-1 An unaccelerated, mineral filled fire retardant resin meeting M I & F3 (French) classifications.

A preaccelerated version.

3355-W-2

Svnolite 3720-1-1 A preaccelerated, thixotropic isophthalic resin offering good mechanical properties.

I ai

1.10

11 b j

52.5%

1cf

2.4-2.5dP/25

1df

6.5-10.5

11 ef

20/25

1f f

I si

hi,.

1 ii

105OC

I

62OC

I

gooc

I

Svnolite 3753-1-1 A preaccelerated,thixotropic, general purpose orthophthalic.

Different reactivity version, gel time, An LSE version of 3753-1-1.

3753-1-2 3753-K

e 28/25.

Svnolite 3780-T-1 An unaccelerated, thixotropic, orthophthalic with good mouldability.

I ai

1.12

u bi

58.5%

11 c i

2.0-2.3dp125

1 df

22-28

11 e!

11/25

11 f i

n si

1 hj

i

:

Svnolite 3785-L-1 A preaccelerated, thixotropic, orthophthalic for general purpose use with low exotherm.

Different reactivity version, gel time, e 30325.

3785-L-2

Svnolite 4038-WA selective, mineral filled fire retardant system.

I a(

b ( 68%

4 ci

3.0-4.2dPI25

1dj

1 ej

I sl

1f f

I hj

I if

Svnolite 6815-N-1 An MMA modified, UV stabilised flame retardant resin satisfying M I (French) and designed for translucent roof sheeting.

I ai

1.3

1 bi

62.5%

11 c !

1.9-2.25dp/25

11 di

13-19

11 ej

16/25

]I f !

II s!

I[ hi

1 ii

7OoC

I

N 91

I( hi

11 i i

6OoC

I

hi

u if

8OoC

I

Svnolite 7448-P-2 A thixotropic DCPD, LSE resin for general purpose application.

1 ai

1.11

[I b i

64%

[I c i

3.2dP/25

[[ di

25

1 el

17/25OC

fi

Svnolite 8099-N-1 An unaccelerated, UV stabilised orthophthalic resin for translucent roof sheeting.

I a/

1.10

11 b /

64%

u c i 3.6-4.ldP125 1 d f 22-28

I[ el

15.3/25

1f i

u sf

Under a licence agreement with DSM, the company manufacture a selected (but large) range of their polyester resins, but as agents for DSMeBASF Structural Resins are also able to import the full range into Australia. 177

Databook - Section D8 :Unsaturated Polyester Resins For Laminating & Associated Purposes

P-600 A low cost, all-purpose polyester for prepreg manufacture which in-turn offers a cost-effective alternative to wet-lay processes. Approved for radome application. Cure temperature 80 - 105OC and service temperature up to 7OOC. P-602 A flame retardant polyester offering good electrical properties when vacuum bag or autoclave processed. Meets MIL-R-7575, Grade A, Class 3. P-603 A low temperature curing polyester for prepreg manufacture to replace wet lay-up techniques. P-604C A flame retardant modified polyester for prepreg manufacture. Meets MIL-R-7575, Grade A 8, B. P-650M A modified dialylphthalate polyester for prepregs which in turn offer excellent wet electrical properties. Meets MIL-R-7575. Grade A & B. P-650R A polyester for prepreg application offering good structural integrity, excellent electrical characteristics and optical clarity. Meets MIL-R-7575, Grade A & 6, Class 2. P-6701 A high temperature, flame resistant polyester for prepreg application. Meets MIL-R-7575, Grade B.

At the time of going to press the future of this company remains unsure, although likely on the latest evidence to be acquired by Cytec Industries Inc. of West Paterson, NJ, USA, and to be known as Cytec Fiberite Inc. Hence known contact addresses for both Fiberite and Cytec Industries Inc have been included in the Directory section. 9002/9012

Flame retarded polyesters cured, as prepregs, at 135 - 163OC for vacuum-bag or low pressure press cure, Suitable for laminate or sandwich panel construction in aircraft and other secondary structural applications requiring good mechanical performance, low flammability and excellent electrical properties.

The following is only a selection of the polyester laminating resin manufactured by the company. F11-2000 A fast cure, general purpose polyester excellent for thin laminates. spray/projection-deposition. c. 400-6OOcps e. 12-20/21 W-I 801 Similar to W-2223 but without an internal release agent. c. 70-1OOcps

Suitable for hand-lay and

e. 3-5/21

W-I 803104 A slow cure LSE polyester with a 2-year shelf life which meets California Rule 1162. c. 600-7OOcps e. 30-45/21

178

- Gwil Industries W-I 805106

A medium cure, low reactivity LSE orthophthalic polyester. c. 500-65Ocps

e. 19-28/21

W-I 811/12

A medium cure. moderate exotherm Dolvester allowing the easier production of thicker laminates. For general purpose’use and suitable for handIlay and spray/projection deposition. c. 400-5OOcps e. 18-25/21 W-I 813114

A medium cure, moderate exotherm polyester allowing the easier production of thicker laminates. For general purpose use and suitable for hand-lay and sprayiprojection deposition. c. 400-5OOcps e. 18-25/21 W-I 819/20

A fast cure, general purpose polyester excellent for thin laminates. spray/projection deposition. c. 350-45Ocps e. 12- a12

Suitable for hand-lay and

W-I 821122

A fast cure, general purpose polyester excellent for thin laminates. spray/projection deposition. c. 450-55Ocps e. 12- 812

Suitable for hand-lay and

W-I 829130

A slow cure, low exotherm polyester. c. 400-5OOcps

e, 25-45/21

W-I 843144

A pigmented white, fast cure, general purpose polyester excellent for thin laminates. Suitable for hand-lay and spraylprojection deposition. c. 450-55Ocps e. 20-35121 W-I 847148 A fast cure, general purpose polyester excellent for thin laminates.

spray/projection deposition.

c. 300-4OOcps

W-l851/52 An LSE resin. c. 550-65Ocps

Suitable for hand-lay and

e. 12-15/21

e. 25-35/21

W-I 854

An LSE resin. c. 550-65Ocps

e. 20-30/21

W-I 857158 A fast cure, general purpose LSE polyester excellent for thin laminates. spray/projection deposition. c. 500-65Ocps e. 19-28/21 W-I 859 A slow cure, low exotherm polyester with a one-year shelf life. c. 400-5OOcps

Suitable for hand-lay and

e. 35-45/21

W-I 903/04 A corrosion-resistant isophthalic with a high degree of resiliency or toughness. c. 450-55Ocps e. 24-60/21 W-I 905106 A high heat distortion isophthalic with outstanding corrosion resistance and physical properties. c. 400-45Ocps e. 25-35/21 W-I 907108 A high heat distortion isophthalic with outstanding corrosion resistance and physical properties. c. 450-53Ocps e. 35-45/21

continued:

179

Databook - Section 0 8 :Unsaturated Polyester Resins For Laminating & Associated Purposes Gwil Industries Inc - continued: w - I 909110 A corrosion-resistant isophthalic with a high degree of resiliency or toughness. c. 450-520

e. 12-20/21

W-I 915116 A corrosion-resistant isophthalic with a high degree of resiliency or toughness. c. 450-550

e. 40-60121

W-I 921122 A corrosion-resistant isophthalic with a high degree of resiliency or toughness. c. 450-550

e. 50-80/21

W-I 929130 A high heat distortion isophthalic with outstanding corrosion resistance and physical properties. c. 400-45Ocps e. 26-40/21 w-2209110

A low colour, UV stabilised, translucent resin.

c. 580-63Ocps

e. 30-65/21

w-2213 A low colour, moderately UV stabilised, translucent resin. c. 580-63Ocps W-2215 A low profile DCPD based resin for RTM application. c. 70-1OOcps

e. 30-65/21

e. 7-11/21

W-2223 An orthophthalic based resin suitable for RTM application. Contains an internal release agent. c. 70-1OOcps e. 3-5/21 w-2229195 A marine grade isophthalic. c. 500-6OOcps

e. 23-30/21

W-2249150 A marine grade isophthalic. c. 500-6OOcps

e. 20-30/21

W-2257158 A low profile, DCPD hybrid base resin for a variety of applications. c. 425-475cps

e. 20-30121

W-2269 A low profile, high heat distortion DCPD resin for applications such as the manufacture of truck hoods. c. 450-5OOcps e. 30-40/21 W-2285 A low profile, DCPD hybrid base resin for a variety of applications. c. 425-475cps

e. 35-45/21

WX-2283184 For the manufacture of reinforcing laminates to acrylic baths and showers. c. 70-11Ocps WX-2285186 For the manufacture of reinforcing laminates to acrylic baths and showers. c. 150-19Ocps W-2287 A low profile, DCPD hybrid base resin for a variety of applications. c. 425-475cps

180

e. 10-15/21 e. 15-20121

e. 30-40121

- Huntsman Chemical Company Limited

Aropol 702 Labelled for ‘miscellaneous’ use no other details provided.

-

Arorool 1066 PLSE A thixotropic, general purpose, medium cure, LSE orthophthalic resin.

e. 120/25

i. 74OC

ArOROl 2015 PALSE A thixotropic, general purpose, medium cure, preaccelerated, LSE isophthalic resin. e. 25-45/25 i. 75OC Aropol 2516 P A non-thixotropic, general purpose, UV stabilised, medium cure, isophthalic resin. e. 25-35/25 i. 100°C Aropol 2517 P A thixotropic, general purpose, UV stabilised, medium cure, isophthalic resin. e. 25-35/25 Aropol 4030 An isophthalic/NPG resin stated to be suitable for ‘sheeting’ manufacture.

i. 100°C

i. 105OC

ArOROl 7241T-I 5 A thixotropic, general purpose, UV stabilised, fast cure, isophthalic resin. e. 25-35/25

i. 100°C

ArOROl 7721 A low viscosity, flexible, isophthalic resin. i. 33OC

C w s f i c 244PA A pre-accelerated, flame retardant, thixotropic, medium cure, di-bromo/NPG resin. e. 25-35/25 i. 7OoC C w s f i c 272 An isophthalic resin suitable for pultrusion and filament winding. viscosity versions. c. 4.5 (LV) and 18 (HV) i. 85OC

Available in low (LV) and high (HV)

C w s f i c 1025 PALSE A thixotropic, general purpose, fast cure preaccelerated, LSE orthophthalic resin. e. 25-35/25

Cwsfic 1027 A thixotropic, general purpose, medium cure, LSE orthophthalic resin.

e. 25-35/25

C w s f i c 1035 PALSE A thixotropic, general purpose, fast cure preaccelerated, LSE orthophthalic resin.

i. 74OC

i. 74OC

e. 25-35/25

C w s f i c 1036 PLSE A thixotropic, general purpose, medium cure, LSE orthophthalic resin.

e. 55-70/25

i. 74OC

C w s f i c 1037 PLSE A thixotropic, general purpose, medium cure, LSE orthophthalic resin.

e. 25-35/25

i. 74OC

C w s f i c 1038 PLSE A thixotropic, general purpose, medium cure, LSE orthophthalic resin.

e. 45-55/25

i. 74OC

Crvsfic 1045 PSLSE A thixotropic, general purpose, medium cure, LSE orthophthalic resin.

e. 25-35/25

i. 74OC

i. 74OC

continued: 181

Databook - Section 0 8 :Unsaturated Polyester Resins For Laminating & Associated Purposes Huntsman Chemical Company Limited - continued: Cwstic 1047 PLSE A thixotropic, general purpose, medium cure, LSE orthophthalic resin.

e. 50-70/25

i. 74OC

Crvstic 1052 PALSE A thixotropic, general purpose, medium cure, preaccelerated, LSE orthophthalic resin. e. 60125 i. 74OC Cwstic 2515 P A thixotropic, general purpose, slow cure, isophthalic resin.

e. 55/25

Cwstic 3-491P A thixotropic, medium cure, general purpose, isophthalic resin. Cwstic 3-807P A thixotropic, fast cure, general purpose, isophthalic resin.

i: 85OC

e. 25-35/25

e. 13-23/25

i. 85OC

i. 85OC

Cwstic 6420 PALSE A preaccelerated, fast cure, flame retardant, LSE, laminating resin. e. 25-35/25

i. 74OC

Estarez 930 P A resin stated to be suitable for ‘sheeting’ manufacture. Estarez 1030 PALSE A thixotropic, general purpose, fast cure preaccelerated, LSE orthophthalic resin suitable for the reinforcement of acrylic baths. e. 15-25/25 i. 65OC Estarez 1050 PALSE A thixotropic, general purpose, fast cure preaccelerated, LSE orthophthalic resin.

e. 25-35/25

Estarez 1060 PALSE A thixotropic, general purpose, fast cure preaccelerated, LSE orthophthalic resin.

e. 2-5/25

Estarez 1501 PA A thixotropic, general purpose, medium cure, preaccelerated orthophthalic resin.

e. 25-35/25

i. 72OC

Estarez 1518 PA A thixotropic, general purpose, medium cure, preaccelerated orthophthalic resin.

e. 45-55/25

i. 72OC

i. 65OC i. 65OC

Estarez 3121 PA A preaccelerated, medium cure, low viscosity, flexible orthophthalic suitable for the reinforcement of acrylic baths and shower units. e. 25/25 i. c25OC Estarez 4021 P A resin stated to be suitable for ‘sheeting’ manufacture. i. 7OoC Estarez 4026 PSP A resin stated to be suitable for ‘sheeting’ manufacture. i. 7OoC Estarez 4035 P A flame retardant resin stated to be suitable for ‘sheeting’ manufacture. Estarez 4065 P A ‘low smoke’, flame retardant resin stated to be suitable for ‘sheeting’ manufacture. Estarez 4075 A resin stated to be suitable for ‘sheeting’ manufacture.

182

i. 7OoC

i. 8OoC

- lnterplastic Corporation Estarez 6012 P A thixotropic, medium cure, flame retardant resin.

e. 25/35/25

Hetron 197 L A HET-based resin for corrosion resistant applications.

i. 14OOC

197 P

A thixotropic version of 197, offering medium cure.

197-3

A further thixotropic version.

Silmar SIL 14DE-903 A resin for sign production offering high elongation. c. 1100 Silmar SIL 15BE-359 An acrylic modified, UV stabilised polyester of excellent colour for the manufacture of translucent signs and panels. c. 400 Silmar SIL 26DA-9256 An unaccelerated, low viscosity, semi-flexible isophthalic for filament winding and offering rapid production. Variations (not specified) are available. c. 450 f. 9 Silmar SIL 30DA-685M A rigid, corrosion-resistant isophthalic offering a fast line speed and a high heat distortion temperature for pultrusion. c. 1400 f. 4 Silmar SIL 30DA-964 A medium viscosity rigid isophthalic for pultrusion. c. 2300

f. 3.5

Silmar SIL 30DA-991 A rigid isophthalic/orthophthalicresin for general purpose pultrusion applications. c. 1400 Silmar SIL 30DA-1151A An isophthalic/NPG resin for pultrusion offering water and weather resistance. c. 2600 Silmar SIL 65AA-30C A fast wetting, slow gel, rapid cure orthophthalic. c. 350-700

f. 4 f. 4

e. 22/25

A variant for large parts requiring a long trim time. Offers excellent drain resistance. c. 1050-3400 e. 14/25 SIL 6 5 ~ ~ - a 6 a A low colour variant. Excellent for onyx matrix back-up. e. 10/25 SIL 65AA-895 A general purpose, excellent wet-out variant with a colour change indicator. c. 500-1600 e. 15/25 N.B. Other variants are available. SIL 65AA-583

Silmar SIL 65AB-951 A high impact resistant and tough, orthophthalic containing a wax additive. c. 450-1200

SIL 65AS-1047 SIL 65BE-954

e. 14/25

A Rule 1162 certifiable orthophthalic resin containing a wax additive. c. 450-1300 e. 15/25 A low colour, UV stablised orthophthalic. c. 425 e. 13/25

continued:

183

-

Databook Section 0 8 :Unsaturated Polyester Resins For Laminating & Associated Purposes lnterplastic Corporation - continued: Silmar SIL 65BQ-249 A low colour, USDA approved orthophthalic for surfboard manufacture. c. 425

SIL 65BQ-249A SIL 65BQ-250 SIL 65BQ-250A

e. 13/25

A UV stabilised variant of SIL65BQ-249. A waxed variant of SIL65BQ-249. USDA approved. A UV stabilised variant of SIL65BQ-250.

Silmar SIL 65DA-325 A special unaccelerated, low pressure laminating resin meeting MIL Spec R575. c. 800

e. 4/25

Silmar SIL 69AS-940D A general purpose, orthophthalic, Rule 1162 certifiable resin with wax addition and a colour change indicator. c. 500-1400 e. 21/25 Silmar SIL 74DA-932 An unaccelerated, isophthalic suitable for swimming pool repair. c. 2600

5/25

Silmar SIL 75AA-610 A corrosion resistant isophthalic offering minimal drainage and suitable for tank linings. c. 1050-1800 e. 17/25

SIL 75AA-610s

A higher viscosity, longer gel time and lower peak exotherm, ‘summer’ variant of SIL75AA-610. c. 1425-2500 e. 26/25

Silmar SIL 75AA-821 A general purpose, fast wet-out, corrosion resistant isophthalic. c. 500-1500 SIL 75AA-821s SIL 75AA-860 SIL 75AA-861 SIL 75AA-861 SIL 75AA-1060

e. 18/25

A longer gel time, low peak exotherm, ‘summer’ variant of SIL75AA-821 A further variant. c. 550-1500 e. 16/25 For swimming pools, tanks and large parts. Fast Barcol build-up. c. 500-1650 e. 15/25 A longer gel time, ‘summer’ variant of SIL75AA-861. e. 33/25 Offers very low shrinkage, low surface profile, very tough system for the e. 22/25 manufacture of large parts. c. 650-1575

e. 21/25

Silmar SIL 75AE-1045 A UV stabilised, high viscosity, thixotropic, acrylic modified corrosion resistant isophthalidNPG, having a low casting colour. Can be used like a gelcoat. c. 1900-12000 e. 14/25 Silmar SIL 75AQ-844 An isophthalic resin complying with FDA requirements for polyesters in contact with food stuffs. c. 1125-3000 e. 15/25 Silmar SIL 75BA-602 A corrosion resistant isophthalic suitable for tank repair work. c. 300 SIL 75BB-602A

A variant of SIL75BA-602 containing a wax additive.

Silmar SIL 75BA-605 A low colour, high impact, corrosion-resistant isophthalic. c. 650 SIL 75BB-605B

e. 28/25

e. 9/25

A UV stabilised variant.

Silmar SIL 75BA-1131 A very tough, crack resistant, semi-rigid, corrosion resistant isophthalic. c. 600

184

e. 14/25

- Jiangyin Crabec Synthetic Chemicals Co Ltd Silmar SIL 75BE-929 A UV stabilised corrosion resistant isophthalic suitable for high performance surfboards. (Not Rule 1162 approved.) c. 500 e. 11/25 Silmar SIL 75BQ-839 An isophthalic resin complying with FDA requirements for polyesters in contact with food stuffs. . . c. 450 e. 10125

SIL 75BQ-989 SIL 75BA-989N

A lower viscosity, longer gel time variant of SIL75BQ-839. FDA approved. c. 210 e. 30/25 A non FDA approved variant.

Silmar 996 A resin stated to be suitable for ‘sheeting’ manufacture.

- -

Fuli C 2 Iso-NPG

-

Fuli PT2 Pultrusion Resin The system is supplied free of release agent.

-

-

Fuli RTM 1 Resin Specifically formulated for RTM application.

11 b; 0.18%

ai j

58-65%

11 k j

11 c f 0.25-0.45 11 d f 11 I >50 11

18-25

11 e f 11 n i

8-16/25

11 0 ;

ff

11 gi II PI

42

1 hf

n qI

11 i f

6OoC

u r!

-

Fuli - RTM 2 Resin Specifically formulated for RTM application.

1 bi

ai j i

0.2%

58-65% 11 c i 0.33-0.67 11 dj 20-29 >80 11 I f 1 mi

11 kj

1 gi

45

10-16/25 ]I f YO 11 o f

11 gi II Pi

>4O

e! 10-16/25 11 f ! 11 n i >2% 1 ol

1 gi II Pi

1 ei 1 nj

10-22125 11 f 11 oi

I

I Pi

u si

11 i i 120OC 1 rj

11 hi II qj

1ii

11 hi II 41

11 i i >1OOoC 1r ;

hi

-

Fuli 881 FR Pultrusion Resin A flame retardant resin suitable for pultrusion.

-

Fuli 886 Ortho Resin for FW

An orthophthalic resin suitable for filament winding.

11 b f

ai

..

64-70% 11 ci 0.4-0.55 11 k i >80 11 I i

11 d! 1 rnj

24-30 3.5

11 ej 1 nf

>6OoC

11 r i

-

Fuli 887 Is0 Resin for FW An isophthalic resin suitable for filament winding. aj

..

11 b f

J i

continued:

58-64% 11 c i 0.4-0.55 >80 11 I

11 k f

u di

11 mi

10-16 3.5

>4O

185

-

Databook Section 08 :Unsaturated Polyester Resins For Laminating & Associated Purposes Jiangyin Crabec Synthetic Chemicals Co Ltd - continued:

-

Fuli 911 Liqht Stabilised Resin

Shortly before going to press, the company was acquired by Reichhold Chemicals Inc. Changes to Jotun manufacturing units, name, distrbution or other arrangements, and with regard to possible alterations in the respective resins supplied, have not been advised. Norpol 2 0 0 ~ e r i e s Approved for marine use by Bureau Veritas, Lloyd’s Register of Shipping, Germainscher Lloyd’s, Korean Register of Shipping and the Maritime Register of Shipping. 200-000 A medium reactive, resilient isophthalic/NPG base resin, combining good mechanical properties with good HDT and a very low water absorption. Recommended for constructions subjected to high static and/or dynamic loads. Also applicable to pultruded profiles which are required to have some chemical resistance and very good fatigue resistance, but cannot be employed together with low profile additives. a]

j

0.5%/28

11 b ] 63% 11 c i 1100-1400 1 d i 11 k ! 135 11 I ! 75 1 mi

4 6 3.2

11 e l 8-14/23 11 f I 11 n i 6.5% 1 0 ;

11 h i

II si II PI

11 i 90°C 11 r i

I ql

There are seven other thixotropic resins within this series showing variations from the above as follows. Gel times are typical relative to resin reactivity, accelerator and catalyst additions as appropriate see manufacturer’s datasheet.

-

200-M300 :

Unaccelerated. LSE resin. e 35-45/23

200-700 :

Preaccelerated, medium-to-high reactive resin offering relatively short demoulding time. RLT 2 to 5mm. e 15-25/23

200-M700 :

LSE version of 200-700.

200-800 :

Preaccelerated, medium reactive resin. RLT 4 to 8mm. e 35-45/23

200-M800 :

LSE version of 200-800.

200-880 :

Preaccelerated, medium-to-low reactive resin. RLT 6 to 12mm.

200-M880 :

LSE version of 200-880.

c 900-1100 e 50-60123

In addition there three 200 series resins designed for specific fabrication techniques, as below. 200-010 :

Unaccelerated, resilient resin for resin transfer moulding. e 12-18/23

200-020 :

Unaccelerated, good resiliency and hydrolythic stability for filament winding.

186

e 10-15123

- Jotun Polymer AS 200-580 :

Preaccelerated, medium-to-low reactivity system, for resin transfer moulding where a long injection time applies. RLT 2 to 12mm. e 100-120/23

NOrRO/ 250-000 A medium reactive, high molecular weight isophthalic/NPG base resin showing very good chemical resistance. It can also be employed to obtain good adhesion to rigid PVC. Suitable for centrifugal casting.

ai ]I b / 57% 11 c ( 850-1250 j i 0.6%128 11 k ( 130 11 I 60

250-410 : ai .:

1 di c15 1) e: 10-16/23 11 f 11 m( 3.6 11 n( 2.5% 11 o i

u gl

II Pi

11 h i II si

11 i i 98OC 1r j

A special unaccelerated isophthalic/NPG system, offering good chemical resistance.

1 bi 11 k j

1 ci

2800-3200 11 d (

11 I j

11 mi

11 e ! 50-60/23 1 f i 11 n! 3.0% ]I o!

I gI I Pi

11 hi II si

11 i i

92OC

ri

250-51 0 :

A

250-810 :

A medium-to-low reactive, preaccelerated, thixotropic isophthaWNPG resin, as for 250-000, but of different viscosity (c 1100-1300) and a typical gel time (e) of 15-25/23. Exhibits very good chemical resistance. RLT 3to8mm.

medium reactive, preaccelerated isophthalidNPG resin exhibiting good chemical resistance, but of different viscosity (c 900-1100) and a typical gel time (e) of 45-55/23 to 250-000. Recommended for solid surface applications. Suitable for filament winding.

Norpol 291-000 A medium reactive isophthaWNPG base resin suitable for non-reinforced applications and sheeting.

291-080 :

An unaccelerated, UV stabilised resin, offering medium chemical resistance, based on 291000 and designed for continuous lamination. e 10-15/23 n 2.0%

291409 :

A preaccelerated, UV stabilised isophthalic/NPG, chemically resistant resin exhibiting good curing properties but having a different viscosity (c) 900-1100 and typical gel time (e) of 2530/23,to 291-000. Recommended for solid surface applications.

Norpol 330-000 Maximum clarity, medium reactive, orthophthalic base resin for translucent laminates.

330-120 :

Substantially as for 330-000, UV stabilised and containing MMA monomer.

330-610 :

A preaccelerated version of 330-120 of medium reactivity.

Norpol 360-000 Medium reactive, orthophthalic base resin of low viscosity and reduced shrinkage.

360-060 :

Unaccelerated, with good filler wetting properties, suitable for cold-press moulding.

360-070 :

Similar to the above, but of different viscosity see manufacturer’s datasheet.

-

continued: 187

Databook - Section 0 8 :Unsaturated Polyester Resins For Laminating & Associated Purposes Jotun Polymer AS - continued:

.410-M300 :

Unaccelerated, LSE resin. c 1100-1300

e 35-45/23

410-M700 :

Preaccelerated, medium-to-high LSE resin offering relatively short demoulding time. RLT 2 to 5mm. c 1100-1300 e 15-25/23

410-M800 :

Preaccelerated, medium reactive, LSE resin. RLT 3 to 8mm. c 1100-1300 e 35-45/23

410-M870 :

As for 410-M800 but offering a longer gel time.

410-M880 :

Preaccelerated, medium-to-low reactive, LSE resin. RLT 5 12mm. c 1100-1300 e 45-55/23

410-M910 :

Preaccelerated, low reactive, LSE resin.

c 1000-1200

e 55-65/23

-

RLT 6 - 15mm.

c 1100-1300 e 60-70123

Then there are two 410 series, white pigmented, preaccelerated, LSE and thixotropic, orthophthalic resins of medium reactivity, designed specifically for the backing of acrylic baths, as below. Surface preparation is necessary prior to secondary lamination.

RLT 3 to 8mm.

410-M710 :

Offers good curing speed. n 8%

410-M717 :

Offers faster cure than 410-M710, and with a difference in the typical gel time (e) of 5-9/23.

c 600-700

e 12-18/23

i 80°C

Finally there are two 410 resins, as below, suitable for the fabrication techniques shown, and one for tooling manufacture. 410-500 :

Preaccelerated, not thixotropic, high reactivity suitable for resin transfer moulding. RLT 2 to 5mm. e 3-5/23

410410 :

Preaccelerated, high reactivity offering fast curing a short demoulding times. Suitable for continuous lamination and sandwich skin constructions. RLT 1 to 3mm. e 10-15/23

188

- John Porymer AS 413-103 :

Unaccelerated, non-thixotropic resin with good wetting properties for higher filler loadings. Suitable for cold-press moulding. e 25-35/23

413-220 :

Unaccelerated, thixotropic resin based on 413-000 offering good resilience and cure. Fillers can be added. Suitable for continuous lamination. c 900-1100 e 8-15/23.

Noraol 415-000 Unaccelerated medium reactive orthophthalic base resin with good resilience, suitable for centrifugal casting and for pultruded profile manufacture.

There are six other resins as below, within the 415 series and althopugh, specially formulated for polyester concrete/cultured marble applications, they may find other laminating application. 415-015 :

Unaccelerated, orthophthalic containing amine for fast curing. e 3-5/23 n 5.0%

415-041 :

Unaccelerated, orthophthalic, general purpose grade. typical gel time (e) of 10-15/23.

415-MI00 :

Unaccelerated, LSE orthophthalic containing internal release agent. Properties as for 415015 other than typical gel time (e) of 25-35/23.

415-514 :

Preaccelerated, medium reactivity orthophthalic having substantially similar properties to 415M I 00.

415-515 :

Similar to 415-514 but offering faster demoulding times.

415-M518 :

Preaccelerated, medium reactivity, UV-stabilised, LSE orthophthalic exhibiting a typical gel time (e) of 10-1923.

Properties as for 415-015 other than

Norpol 420Series Medium reactive general purpose orthophthalic base resin. Approved for marine use by Bureau Veritas, Lloyd’s Register of Shipping, Germainscher Lloyd’s and Bundesasnstalt Fur Material Forschung Und Prufung. ai 1 bi 67% 11 c i 1100-1500 j f 0.8%/28 11 k ! 100 11 I 65

11 d! e25 1 mi 4

e! 12-18/23 1 f 11 ni 1.5% 11 o!

!

II g f

u Pi

11 h i

u qi

1 i f 8ooc 11 r i

There are sixteen thixotropic resins within this series, with variations from the above as follows. Gel times are typical relative to resin activity, accelerator and catalyst as appropriate - see manufacturer’s datasheets. 420-200 :

Unaccelerated.

c 1100-1300/23

e 15-25/23

420-230 :

Unaccelerated.

c I100-1300123

e 12-18/23

420-240 :

UV-stabilised version of 420-200.

420-M250 :

LSE version of 420-200.

420-300 :

Unaccelerated.

420-M350 :

LSE version of 420-300.

420-700 :

Preaccelerated, offering medium/high reactivity and short demoulding time. RLT, 2 to 5mm. Otherwise as 420-200.

420-730 :

Preaccelerated, offering high reactivity and short demoulding time. RLT 1 to 4 mm. e 10-15/23

c 1100-1300/23

e 20-30/23

e 35-45/23

continued: 189

Databook - Section 08 :Unsaturated Polyester Resins For Laminating & Associated Purposes Jotun Polymer AS - continued: 420-M730 :

LSE version of 420-730.

420-M750 :

LSE Of 420-700.

420-M760 :

Preaccelerated, medium reactivity. RLT 3 to 6mm.

420-M784 :

Preaccelerated, medium-to-low reactivity. RLT 3 to 8 mm. e 12-18/23

420-800 :

Preaccelerated, medium reactivity. RLT 3 to 8mm.

420-M850 :

LSE Of 420-800

420-M880 :

Preaccelerated, LSE, medium-to-low reactivity. RLT 4 to 10mm. e 45-55/23

420-M920 :

Preaccelerated, LSE, low reactivity. RLT 6 to 15mm.

e 20-30/23

e 35-45/23

e 55-65/23

In addition there are, as below, five 420 series resins designed for the fabrication techniques shown. 420-070 :

Unaccelerated, suitable for cold-press moulding.

420-100 :

Unaccelerated resin, suitable for resin transfer moulding, offering good crack resistance in i 67°C n 3.5% resin rich areas. e 20-30/23

420-110 :

Unaccelerated and UV stabilised suitable for low coloured laminates and continuous lamination. e 15-20/23

420-130 :

Unaccelerated and UV stabilised, but offering a faster cure than 420-110. continuous lamination: e 9-13/23

420-510 :

A preaccelerated, high reactivity version of 420-100 for resin transfer moulding. e 15-25/23

e 15-20/23

Suitable for

Norrool 431-000 A general purpose orthophthalic base resin for translucent laminates containing only styrene as a monomer.

431-048 :

In effect a UV stabilised version of 431-000.

Norrool 440-Series A medium reactive general purpose orthophthalic base resin. Approved for marine use by Det Norske Veritas, Bureau Veritas, Lloyd’s Register of Shipping, Germainscher Lloyd’s, Registro ltaliano Navale and Maritime Register of Shipping.

There are sixteen thixotropic resins within this series, with variations from the above as follows. Gel times are typical relative to resin activity, accelerator and catalyst as appropriate - see manufacturer’s datasheets. Equally, Brookfield LVF viscosity mPa.s at 23OC (c) is 1100-1300, other than as shown above. 440-200 :

Unaccelerated.

440-M250 :

LSE version of 440-200.

440-300 :

Unaccelerated, offering medium-to-low peak exotherm. e 35-45/23

440-M350 :

LSE version of 440-300.

190

e 15-25/23

- Jotun Poiymer AS 440-M380

Unaccelerated, LSE, offering medium-to-low peak exotherm. e 45-55/23

440-700

Preaccelerated, medium-to-high reactivity, offering a relatively short demoulding time. RLT, 2 to 5mrn. e 15-25/23

440-M701 :

Preaccelerated, high reactive, LSE resin offering short demould time. RLT 1 to 4mm. e 20-30/23

440-M750 :

LSE version of 440-700.

440-800 :

Preaccelerated, medium reactive. RLT 3 to 8mm.

440-840 :

Preaccelerated, medium-to-low reactivity. RLT 5 to 12mm. e 45-55/23

440-M850 :

LSE version of 440-800. e 35-45/23

440-M860 :

Preaccelerated, medium reactive, LSE which in comparison to 440-M850, offers shorter demould times. RLT 3 to 8mm. e 35-45/23

440-M880

LSE version of 440-840.

440-M890

White pigmented, preaccelerated, medium reactive, LSE resin. Otherwise as 440-M880.

440-M920 :

Preaccelerated, low reactive, LSE resin. RLT 5 to 12mm. e 70-80/23

440-M950 :

Preaccelerated, medium reactive, LSE system. RLT 3 to 8mm. c 1300-1500/23 e 20-30/23

e 35-45/23

There are then five 440 series, white pigmented, preaccelerated, LSE and thixotropic, orthophthalic resins of varying reactivity, designed specifically for the backing of acrylic baths, as below. Surface preparation is necessary prior to secondary lamination. 440-M705 :

Medium reactivity.

440-M780 :

Medium reactivity but faster cure than 440-M790

440-M789 :

Medium-to-high reactivity, otherwise as 440-M780.

440-M790 :

Medium-to-low reactivity, otherwise as 440-M780.

440-M970 :

Medium reactivity, c 900-1100 and e of 25-35/23, but otherwise as 440-M705.

c 1100-1300

e 6-10/23

i 65°C

n 1.6%

e 15-25/23

Norpol 460-510 A preaccelerated, medium reactive, non-thixotropic orthophthalic resin for resin transfer moulding offering good curing and short demoulding times. RLT 2 to 8 mrn.

Norpol 480Series Approved for marine application by Det Norske Veritas. 480-000 :

A medium reactive, high quality orthophthalic base resin formulated to be resistant to less aggressive chemicals.

continued:

191

Databook - Section 0 8 :Unsaturated Polyester Resins For Laminating & Associated Purposes Jotun Polymer AS - continued:

There are eight other thixotropic resins resistant to less aggressive chemicals within this series, with variations from the above as follows. Gel times are typical relative to resin activity, accelerator and catalyst as applicable - see manufacturer’s datasheets. Some HDT’s (I) may be slightly lower than shown. c in all cases is 1100-1300. 480-M300 :

Unaccelerated. LSE resin.

480-700 :

Preaccelerated, medium reactive resin offering relatively short demoulding times. RLT 2 to 6mm. e 15-25/23

480-M750 :

LSE version of 480-700.

480-M757 :

Similar to 480-M750 but higher reactivity, offering relatively short demoulding time. RLT 1 to4mm.

480-800 :

Preaccelerated, medium reactive resin. RLT 3 to 8mm.

480-M850 :

LSE version of 480-800.

480-M860 :

Similar properties to 480-M850. Contact manufacturer to establish exact difference.

480-M880 :

Preaccelerated, low-to-medium reactive, LSE system.

e 35-45/23

e 35-45/23

RLT 4 to 10mm.

e 50-60123

Then there are three 480 series resins - as below - suitable for filament winding and centrifugal casting. 480-020 :

Unaccelerated, recommended for water and sewage applications. Good water resistance. c 400-500 e 12-18/23

480-500 :

Preaccelerated, medium reactivity version of 480-020.

480-M610 :

Substantially an LSE version of 480-500.

e 9-13/23

e 25-30/23

In addition there is one unaccelerated orthophthalic resin in this whole series, as below, suitable as a relining resin for water and sewage applications. 480-410 :

Thixotropic. c 2800-3300

e 30-40123

i 86°C

n 3.0%

Norm1 540-Series A medium reactive orthophthalic base resin for general purpose applications but giving improved mechanical and impregnation properties when compared to Norpol 440-000. Approved for marine application by Det Norske Veritas and Lloyd’s Register of Shipping.

There are eight thixotropic resins within this series, with variations from the above as follows. Gel times are typical relative to resin reactivity, accelerator and catalyst as appropriate - see manufacturer’s datasheets. 540-M380 :

Unaccelerated, LSE resin. c 1300-1500

540-M700 :

Preaccelerated, LSE, medium-to-high reactive system, offering short demoulding time. RLT n 2.5% 2 to 5mm. c 1100-1300 e 15-25/23

540-800 :

Preaccelerated, medium reactive system. n 2.5%

540-M800 :

LSE version of 540-800.

540-M860 :

Preaccelerated, medium reactive, LSE system, RLT 3 to 8mm. e 35-45/23

192

e 45-55/23

n 2.5%

RLT 3 to 8mm. c 1100-1300

e 35-45/23

D 30-40/23 n 2.5%

- John Polymer AS 540-M870 :

Similar to 540-M860. e 45-55/23

540-M880 :

Preaccelerated, medium-to-low reactive, LSE system. RLT 5 to 12mm. e 45-55/23 n 2.5%

540-M920 :

Preaccelerated, medium-to-low reactive, LSE system. RLT 3 to 10mm. e 70-80123 n 2.5%

NOrROl 600-040 A hiah reactive. unaccelerated resin giving a good low profile effect, for pultruded profile manufacture. Effectively a low profile version of 680-000. c -850-1 150 600-050 :

A high reactive, unaccelerated resin giving a good low profile effect (but reduced compared to 600-040), for pultruded profile manufacture. Like 600-040, a further low profile version of 680000.

600-130 :

A medium-to-high reactive, fire retardant (AT0 + chl. par.) isophthalic resin with low profile additives offering some chemical resistance and suitable for pultruded profile manufacture. c 700-1100

NOrROl 620-000 A high to medium reactive, tetrahydrophthalic base resin especially formulated to be resistant to standard and methanol containing petrol.

630-220 :

An unaccelerated, thixotropic isophthalic resin offering good resilience and good cure. Fillers can be added. Suitable for continuous lamination. c 900-1100

Norpol 631-000 A medium to high reactive isophthalic base resin giving good resiliency and HDT, especially developed for RTM fabrication.

631410 :

Preaccelerated, medium reactivity resin for RTM. RLT 2 to 8mm.

e 7-9/23

NorRol 640-000 A highly reactive terephthalic base resin, showing good mechanical properties and suitable for pultrusion.

640-700 :

A preaccelerated medium reactive terephthalic system, otherwise as for 640-000, but exhibiting a viscosity, (c), of 11900-1300-and a typical gel time (e) of 15-25/23. RDT 3 to 8mm.

continued:

193

-

Databook Section 0 8 :Unsaturated Polyester Resins For Laminating & Associated Purposes Jotun Polymer AS - continued:

NO~ROI650-000 A highly reactive, rigid isophthalic base resin, offering good heat-ageing properties and especially developed for pultrusion.

650-050 :

An unaccelerated, thickenable low profile isophthalic. c 2600-2900

650-060 :

Similar to 650-050 but with reduced low profile properties compared to 650-050.

Norpol 660-000 A very highly reactive, rigid maleic orthophthalic base resin, suitable for the manufacture of pultruded profiles and when blended with Jotun's LPA 9888, an optimum LP property - plus improved resilience for profiles is achieved. In this case the viscosity (c) becomes 4500-5000.

-

aj 1 b j 60% 11 c i 1050-1200 j .i 1.4%/28 11 k i 62 11 I / 27

11 d / 11 mi

4 6 3.5

11 e i 12-18/23 11 f i 11 n i 0.8% 11 01

I

II gi Pi

hi

II si

1 i i 140% I] r i

Norpol 670-000 A highly reactive, rigid orthophthalic base resin with a high heat distortion temperature, formulated for the manufacture of pultruded profiles. Can be blended with 680-000 series resins to give differing levels of fire retardancy - see manufacturer'sdatasheets. ai 1 b i 61% 11 c / 1100-1300 . . i 1.1%/28 11 k i 95 (1 I ! 50q

j

11 d! 11 mi


11 e !

12-20/23 1.5% 11

11 n /

11 f !

01

si II Pi

11 h i II qi

11 i / 127OC 1 rj

670-040 :

Low profile, unaccelerated, high reactive, version suitable also for pultrusion. c 900-1300

670-050 :

Further unaccelerated low profile version of 670-000, but to reduced effect compared to 670040.

670-060 :

A low profile version of 670-150,can be regarded as a standard orthophthalic LP system.

670-100 :

Unaccelerated modified orthophthalic, thickenable, to be used with a low profile additive for pigmentable mouldings.

670-150 :

Unaccelerated medium-to-high reactive, toughened system with reduced danger of micron 1.8% cracks when used for pultruded profiles. c 900-1300

670-160 :

Unaccelerated medium reactive resin for pultruded application. i 110°C n 2.3% c 400-600

670-191

A low viscosity medium reactive, unaccelerated orthophthalic resin for use with high ATH

loadings in the manufacture of non-halogenated fire retardant profiles.

n 4.0%

In addition there are two 670 series resins, as below, offering low shrinkage (profile) characteristics suitable for resin transfer moulding application. 670-706 :

Preaccelerated, high reactivity, for moulding >7OoC. RLT 2 to 5mm.

670-710 :

Similar to 670-706 but of different viscosity. See manufacturer's datasheet.

Nor1101 680-000 A highly reactive, rigid isophthalic base resin suitable for SMC/BMC (Class F) manufacture and fabrication by pultrusion. Thickenable with isocyanates. Provides good heat ageing properties.

194

- Jotun Polymer AS 680-090

An unaccelerated, medium-to-high reactive resin for pultruded profile manufacture which can be considered a low profile version of 680-150. Can be regarded as a standard isophthalic LP system. c 500-800

680-150 :

Medium-to-high, unaccelerated reactive toughened isophthalic offering some chemical i 110°C n 2.3% resistance for pultruded profile manufacture. c 500-800

680-191 :

An unaccelerated, low viscosity, medium reactive isophthalic resin for use with high ATH filler loadings in the manufacture of fire retardant pultruded profiles. i 80°C n 3.5%

680-300 :

An unaccelerated, thixotropic, isophthalic resin as for 680-000, but exhibiting a different viscosity (c 900-1100) and a typical gel time, (e), of 40-50/23. Provides some chemical resistance and suitable for hand-lay and spray/projection lamination.

680-700 :

A preaccelerated, medium-to-high reactive, thixotropic resin otherwise as for 680-000, but exhibiting a different viscosity (c 900-1100) and a typical gel time, (e), of 15-25/23. Offers a short demould time with some chemical resistance for hand-lay and spray/projection moulding.

680-800

A preaccelerated, medium reactive, thixotropic resin otherwise as for 680-000, but exhibiting a different viscosity (c 900-1100) and a typical gel time, (e), of 40-50/23.

Norrool 710-000 A general purpose chemical resistant, medium reactive isophthalic base resin.

11

11

ai bi 66% ci 1550-1950 j j 0.7%/28 11 k ; 120 1 I i 67

710-410 :

1 di 1 mi

4 6 e ; 4-7/23 1 f f 3.6 11 n‘i 2.0% 11 o‘i

II

II g! Pi

11 hi II q’i

11 i i 86OC 11 r l

A special unaccelerated, thixotropic, isophthalic resin offering medium chemical resistance. I 86OC n 2.0% c 2800-3300 e 30-40/23

NorDol 72OSeries Approved for marine use by Det Norske Veritas, Bureau Veritas, Lloyd’s Register of Shipping, Registro ltaliano Navale and Korean Register of Shipping. 720-000 :

A general purpose chemical resistant, medium reactive, isophthalic base resin.

There are ten other thixotropic resins within this series, with variations from the above as follows. Gel times are typical relative to resin reactivity, accelerator and catalyst - see manufacturer’s datsheets. 720-200 :

Unaccelerated. c 900-1100

e 15-25/23

720-300 :

Unaccelerated. c 900-1100

e 35-35/23

720-700 :

Preaccelerated, medium-to-low reactivity offering relatively short demoulding times. RLT 3 to 8mm. Otherwise as for 720-200.

720-720 :

Basically an LSE version of 720-700 but exhibiting a different viscosity (c 1100-1300) and a typical gel time (e) of 10-20123. RLT 2 to 5mm.

720-M750 :

An LSE version of 720-700. RLT 2 - 5mm.

720-800 :

Preaccelerated, medium-to-low reactivity resin. RLT 4 to 10mm. 900-1100 e 35-45/23

c

720-M850 :

An LSE version of 720-800. RLT 4 to 12mm.

continued: 195

Databook - Section 0 8 :Unsaturated Polyester Resins For Laminating & Associated Purposes

Jotun Polymer AS - continued: 720-M860 :

Preaccelerated, medium reactive resin giving shorter demoulding times than 720-M850. RLT 3 to 8mm. c 1000-1300

720-880 :

Preaccelerated, low reactive resin. RLT 5 to 15mm.

720-M880 :

An LSE version of 720-880.

e 50-60/23

Then there is one 720 series resin - see below - of medium chemical resistance, suitable for centrifugal casting, cold-press moulding, continuous lamination, and resin transfer moulding.

720-010 :

Unaccelerated. e 12-18/23

Finally there are four 720 series resins offering chemical resistance, designed for filament winding or centrifugal casting.

720-020 :

Unaccelerated, medium chemical resistance.

720-0801 :

Unaccelerated, medium chemical resistance inhibited for tropical climates. c 750-800 e 10-15/23

720-151 :

Unaccelerated, flexibilised resin for liner application. e 12-18/23

720-500 :

Preaccelerated, medium reactivity version of 720-020.

e 15-20/23

n 20%

e 9-13/23

Norpol 730-000 A medium reactive, resilient isophthaiic base resin.

11 b ] '66% 11 c j 730-500 :

950-1250

11 d f

e15

11 e!

12-18/23 1 f

u sf

Preaccelerated, non thixotropic, medium reactive resin offering mild chermical resistance suitable for cold-press and resin transfer moulding. RLT 3 to 12mm. e 5-10/23

NorRol 800Series A range of six fire retardant orthophthalic resins based on chlorinated paraffin (halogenated) and sometimes antimony trioxide filled, giving medium fire retardant properties but with high smoke emission. Approved for marine application by Det Norske Veritas, Lloyd's Register of Shipping and Maritime Register of Shipping. Property variations to the tabulation below, are shown later as appropriate.

..

e 20-30/23

800-M350 :

An unaccelerated LSE version of 800-200.

800-700 :

Preaccelerated, medium reactive and medium fire retardant resin. RLT 3 to 8mm. e 15-25/23

800-704 :

Preaccelerated and AT0 filled, high fire retardant system exhibiting good curing properties. c 1200-1400 e 15-20/23 I 66°C n 2.0%

800-M750 :

An LSE version of 800-700.

800-M850 :

Preaccelerated, medium-to-low reactivity, ATO-filled and LSE resin of medium fire retardancy. RLT 4 to 12mm. e 35-45/23

196

- Jotun Po/ymerAS In addition there is one 800 series resin, as below, suitable for resin transfer moulding. Preaccelerated UV stabilised and halogenated resin of low reactivity, offering medium fire retardancy and particularly suitable where long moulding times are necessary. RLT 3 to 15mm. e 100-120/23 n 2.0%

800-610 :

NOrROl 81OSeries A range of three, tetrachlorphthalic anhydride based thixotropic resins, containing antimony trioxide and aluminium trihydrate, giving high fire retardancy and moderate levels of smoke emission. Approved for marine application by Maritime Register of Shipping and the Laboratoire National D’Essais.

810-310 : ai .:

Unaccelerated.

11 b! 11 k i

]I

c! 1400-1800 11 I I

11 d! 11 mi

11 e! 20-30/23 11 f 11 n i 0.8% 1 o i

I

I si Pi

1 hi I qi

11 i I 8OoC 11 r i

810-810 :

Otherwise as above but preaccelerated, medium reactive system. RLT 2 to 7mm.

810-M810 :

An LSE version of 810-810.

NOrROl 82OSeries A range of six non-filled fire retardant system, based on orthophthalic or OrthophthalidHET acid, giving medium to low fire retardancy but with high smoke emission. Approved for marine application by Det Norske Veritas and Lloyd’s Register of Shipping.

820-M723 :

Preaccelerated, LSE, halogenated, medium reactive resin. RLT 3 to 8mm.

820-M726 :

Otherwise as above but medium reactivity of lower fire retardancy. c 800-1000 e 22-26/23 n 2.0%

820-M760

Otherwise as 820-M723, but with a viscosity (c) of 900-1100, and an elongation (n) of 2.1%.

820-M840 :

Preaccelerated, medium-to-low reactive, lower fire retardancy system, (non halogenated), with the following differences from 820-M723. RLT 4 to 12mm. c 1100-1300 e 35-45/23 I 73°C n 2.3%

820-M860 :

As for 820-M840 but offering low-to-medium fire retardancy. i 62°C

820-M870 :

A preaccelerated halogenated system of medium reactivity exhibiting medium fire retardancy. n 4.5%

n 2.0%

In addition there are two 820 series resins, offering fire retardancy and designed for the fabrication techniques described. 820-030 :

Unaccelerated, UV stabilised, halogenated. transfer moulding. e 7-11/23 n 8%

820-600 :

Preaccelerated, medium reactive, halogenated and of good clarity. Contains MMA monomer. Suitable for continuous lamination. e 2-30/23 n 3.0%

Suitable for continuous lamination and resin

Nom01 821-829 A preaccelerated thixotropic, halogenated medium reactive isophthalidHET acid resin, giving medium fire retardancy, but with high smoke emission. RLT 3 to 8mm.

continued: 197

Databook - Section 0 8 :Unsaturated Polyester Resins For Laminating & Associated Purposes

Jotun Polymer AS - continued: Norpol 830-M750 A preaccelerated thixotropic HET acid based fire retardant resin containing antimony trioxide and aluminium trihydrate, giving a high level of fire retardancy with high to moderate smoke emission. RLT 3 to 8mm.

Norpol 840-Series Two preaccelerated HET acid based, filled fire retardant resins giving .high fire retardancy. Approved for marine application by Staatliches Materialprufungsamt and Laboratoire National D'Essais. RLT 3 to 8mm.

..

..

Norpol 845-110 An unaccelerated UV stabilised, DBNPG/HET resin, offering high fire retardancy and designed for

Norpol 850-Series Eight non-halogenated isophthalic resins, filled with aluminium trihydrate offering medium fire retardancy. Approved for marine application by Bureau Veritas, Germainscher Lloyd's, Registro ltaliano Navale, Maritime Register of Shipping, Staatliches Materialprufungsamt and Laboratoire D'Essais.

..

11

ki

1 I/

11 mi

11 e ] 25-35/23 (1 f i 11 ni 1.2% 1 oi

II Pi

11 h j 141

11 i j

11 r j

83OC

Preaccelerated, medium reactive. RLT 3 to 8mm. Otherwise than in respect of HDT (i) at 850-700 : 88°C as for 850-M250. 850-M750 :

198

An LSE version of 850-700.

- Lonza SPA 850-800 :

As for 850-700 but with a gel time (e) of 40-50/23.

850-M850 :

An LSE version of 850-800.

850-M860 :

Preaccelerated, medium-to-high reactivity, gives shorter demoulding times than 850-M850. RLT 2 to 5mm.

850-864 :

As for 850-700, but with a viscosity (c) of 2100-2500, a gel time (e) of 35-45/23 and an elongation (n) of 1.0%. RLT 3 to 8mm.

850-M864 :

An LSE version of 850-864 with a slightly reduced HDT (i) of 75°C.

I 83°C

In addition there are three 850 series, non-halogenated resins lamination.

-

see below

-

designed for continuous

850-200 :

Unaccelerated, thixotropic, ATH filled. Medium fire retardancy. Is also stated as suitable for cold-press moulding. c 1400-1800 e 25-35/23

850-864 :

Preaccelerated, thixotropic of medium reactivity, ATH filled. Medium-to-high fire retardancy. c 2100-2500 e 35-45/23

850-M864 :

An LSE version of 850-864.

Norrool 851-Series Four halogen free, fire retardant resins, based on orthophthalic resin, filled with aluminium trihydrate. Approved for marine application by Det Norske Veritas.

851-M200 : ai

..

Unaccelerated and thixotropic LSE resin - an orthophthalic version of 850-M250

]I ci

11 b i 11 k i

1400-1800 11 d i

11 I ;

1 e;

1 mi

25-35/23 11 f i 1oi

1 hi II qi

ni 1.2%

11 i i

83OC

ri

851-700 :

Preaccelerated, medium reactive, orthophthalic version of 850-700. RLT 3 to 8mm.

851-M700 :

Preaccelerated, medium reactive, orthophthalic version of 850-M700. RLT 3 to 8mm.

851-M800 :

Preaccelerated, medium reactive, orthophthalic version of 850-M850. RLT 3 to 8mm. e 40-50/23.

Norpol 852Series A halogen free fire retardant system, giving medium fire retardancy and offering low smoke emission.

Distitron 183 CS A preaccelerated, isophthalic resin offering good mechanical properties, plus very good wettability in the manufacture, using vacuum and press moulding techniques of, for example, panels for building, marine and vehicle application.

1 aj

11 b j

63%

]I

cj

600

11 dj

I]

ej

11 f i

u si

1 hf

11 i ;

900~

]

Distitron 187 ST A preaccelerated, thixotropic isophthalic resin offering low shrinkage with very good mechanical properties, and particularly suitable for marine application, by hand-lay or spray/projection lamination.

I ai

11 bj

56%

11 c i

1700

11 di

1 e;

11 f j

II 91

11 hi

11 i i

88OC

I

continued:

199

Databook - Section D8 :Unsaturated Polyester Resins For Laminating & Associated Purposes

Lonza SPA - continued: Distitron 191 An unaccelerated, chemical resistant, isophthalic resin offering good flexibility for the manufacture of pipes, vessels and tank liners, using casting or spray/projection lamination techniques.

1 ai

11 b;

60%

11 c1

300

11 di

(1 e i

1fj

II gi

11 h i

11 i j

IOOC

I

Distitron 201 AZ A UV stabilised unaccelerated orthophthalic resin offering good transparency for the manufacture by continuous lamination of flat and corrugated sheeting.

I ai

11 b i

65%

11 C I

600

(1

dj

1 e;

11 f i

II 9i

11 h j

11 i

j

8OoC

I

Distitron 21182 V4 An unaccelerated, orthophthalic resin offering very good impregnation properties, suitable for the centrifugal casting of poles.

Distitron 21231 LS A low styrene content resin offering very good impregnation properties, for the manufacture of container panels for the vehicle industry, using vacuum or press moulding. Also suitable for building panels.

I aj

11 b i

67%

1 c;

320

I] d i

11 e;

1f

11 g!

I] h j

11 i i

900~

I

Distitron 330125 An unaccelerated, orthophthalic resin offering good wettability, suitable for RTM manufacture. Also has application in cold-press moulding and in the manufacture of hot-press moulding compounds.

I aj

11 b;

65%

11 c i

400

11 d J

11 e l

11 f j

I 91

11 hi

11 i

IIOOC

I

Distitron 412 V2 A unaccelerated orthophthalic resin very suitable for the manufacture by centrifugal casting of pipes and

Distitron 414 CVlO An unaccelerated, high reactive, orthophthalic resin for the manufacture of pultruded profiles exhibiting

Distitron 441 S A preaccelerated, orthophthalic resin offering good mechanical properties, plus very good wettability in the

manufacture, using vacuum and press moulding techniques of, for example, panels for building, marine and vehicle application.

1 ai

200

)I b j

66%

11 ci

470

11 d i

11 ei

11 f i

II 9:

1 hi

1 ii

85OC

I

- Lonza SPA Distitron 449 NT9 An unaccelerated, orthophthalic resin suitable for the fabrication by hand-lay or spray/projection lamination, of tanks. Also suitable for centrifugal casting techniques.

I ai

1 bj

59%

11 c j

1200

1 d;

11 e:

1fj

I 91

11 hj

1i

85OC

I

Distitron 454 An unaccelerated, orthophthalic resin for cold-press moulding.

Distitron 461 ST A Rreaccelerated, thixotropic, orthophthalic resin specially suitable for the manufacture by hand-lay or spiay/projection deposition: of sanitary ware. The resin also offers good adhesion to acrylic baths.

I

aj

I] b!

65%

1 ci

1700

I] d(

I] ei

11 f

I gl

1 hi

1i !

72OC

1

Distitron 514 Z A UV stablised unaccelerated orthophthalic resin offering good transparency for the manufacture by continuous lamination of flat and corrugated sheeting.

I ai

11 b j

61%

11 c i

300

11 d j

1 ej

11 f j

II gl

11 hi

11 i !

85OC

I

Distitron 1629 EL5 An unaccelerated chemical resistant, isophthalic resin suitable for spray/projection and filament winding lamination in the manufacture of pipes exhibiting good mechanical properties.

I a!

11 b;

60%

11 c ;

300

1 dl

1 ei

1fi

u si

1 hi

1i !

]

OCI I

Distitron 1629 NT A preaccelerated, thixotropic isophthalic resin, particularly suitable for marine application and offering chemical resistance and very good mechanical properties, for hand-lay or spray/projection lamination,

I ai

11 b i

56%

11 c f

1700

11 di

11 el

11 f j

II si

1 hi

1i j

I

OOC II

Distitron 5119 NX A preaccelerated, thixotropic orthophthalic resin, particularly suitable for marine application and offering some chemical resistance, for hand-lay or spray/projection lamination.

I al

11 b ]

58%

11 c i

1700

11 d ]

11 el

11 f

II gl

11 hi

11 i i

750~

1

continued: 201

Databook - Section D8 :Unsaturated Polyester Resins For Laminating & Associated Purposes Lonza SPA - continued:

Polvmar PGL 322 A preaccelerated polyester of excellent wettability, formulated for the fabrication of large structures.

1 a;

1.08-1.11

I] b;

11 c ;

400-600

1 df

1 ef

I

28-32/25

Polvmar PGL 324 Identical to PGL 322 other than gel time, Le. e 15-20/25 Polvmar PLT 232 Thixotropic resin designed for hand-lay or spray/projection of small-to-medium structures and for the rigidiizing of thermoformed acrylic in for example bath and shower manufacture. Offers rapid reinforcement wet-out.

I ai

1.08-1.11

11 b j

11 c i

400-600

11 d i

11 e:

Polvmar PLT 234 Identical to PLT 232 other than different gel time.

28-32/25

1

e 10-15/25

Polvmar PMG 432

A preaccelerated, ‘summer’ grade, laminating resin with excellent wettability, suitable for the fabrication of large structures, tanks and boats. Can also be used for the reinforced backing to acrylic baths. More economical than the general purpose PGL 322 & PLT 232, but in comparison to those systems, also able to provide laminates of greater tensile & flexural strength, as well as flexural modulus.

Polvmar PMG 434 The ‘winter’ version of PMG 432, with only- a gel - time difference, i.e. D 15-20/25. More economical than either PGL 324 or PLT 234, but in comparison to those systems, also able to provide laminates of greater tensile & flexural strength, as well as flexural modulus. Polvmar PMI 80 An isophthalic general purpose resin, offering good chemical resistance, flexibility, high tenacity and elongation, with low water absorption.

I aj

202

1.10-1.12

1 bj

71-73%

11 c i

1 dj

<20

11 e!

8-15/25

I

- McWhorter Technologies

The company note that regional variations may often apply to satisfy temperature extremes. 712-1 946 A preaccelerated, low viscosity, thixotropic resin for hand-lay, spray/projection lamination, and use in boats and large FRP products.

714-1636 A preaccelerated, thixotropic room temperature cure polyester for use in laminates applied to acrylic baths and shower trays.

714-5222 A preaccelerated,thixotropic polyester for use in laminates applied to acrylic baths and shower trays.

I a;

11 b;

5236%

1 ci

250-350

1 di

1 ei

9-11/25

I

732-1136 A preaccelerated, low viscosity, low exotherm, fast wet-out, thixotropic resin for hand-lay and spray/projection lamination, in the manufacture of boats.

745-4615 (Formerly 084-8472) A preaccelerated, thixotropic, isophthalic laminating resin for hand-lay and spray/projection lamination, offering fast wet-out and excellent chemical resistance. Meets MIL-R-7575C, Grade A applications.

752-4423 (Formerly 85-8524) A low viscosity, fast wet-out, good cure, thixotropic, Class I flame retardant resin, meeting MIL-R-7575 and suitable for hand-lay and spray/projection lamination. For the manufacture of boats and ductwork. ai

. .

1.28

11 b i 58-62% 1 c i 11 k! 139 11 I

400-460 61

11 di 1 mj

3.9

11 e f 11 n j

10-12/25 1.9% 1

01

11 f

gi

230

I] p'i

.

45 151

11 hi I] q I

9.5

11 i i 72% 1 r i 2.1%

752-4483 (Formerly 85-8533) A preaccelerated, medium reactive, fast wet-out, thixotropic flame retardant Class II resin suitable for marine application. Approved under MIL-R-21607E and MIL -R-7575C.

76251 87 (Formerly 109-0570) A preaccelerated, thixotropic PET/isophthalic resin for use in moderate corrosion resistant applications, or other requiring good physical properties.

203

Databook - Section 08 :Unsaturated Polyester Resins For Laminating & Associated Purposes

Polvf/ex GR 200-05 A general purpose, hand-lay orthophthalic resin.

Polvflex GR 200-10 A superior general purpose, hand-lay orthophthalic resin. a! 1.11 11 b ! 67% 1 c ] 650-850 ! 50mg/7 1 ki 105 1 I 55

j

11 d ! 1 mi

28

11 ei 10-20/25 1 f 11 ni 1.8% 11 01

11 gi II Pi

>45

11 hi II si

11 i ! 65OC 11 r i

Polvflex GR 200-12 A low viscosity UV stabilised acrylic modified orthophthalic resin offering very good wettability, colour retention and a high degree of translucency as ideally suited to the manufacture of translucent panels, corrugated rooflight sheets etc.

]I

b i 60% 11 ci 200-250 45mg17 kj 110 1 I i 55

ai 1.10 j j

n

11 di 11 mj

25

11 ei

15-25/25 11 f i ni 1.8% 11 o j

11 gj II P j

45

11 hi II si

11 i i 68OC 11 r i

Polvflex GR 200-14 A medium viscosity, medium reactive, general purpose, orthophthalic resin suitable for hand-lay and offering good wet-out properties. Approved for marine application by Lloyd’s Registry.

Polvflex GR 200-17 A superior orthophthaWNPG resin for hand-lay purposes, offering improved mechanical properties, low moisture absorption and better heat distortion temperature.

11

)I

a i 1.11 b ! 67% ci 600-750 j j 45mg/7 1 ki 108 1 I j 52

11 d ! 11 mi

25

11 e! 10-20/25 11 f i 11 nj 2.1% 11 o i

Polvflex GR 200-18 A superior corrosion resistant isophthalic/NPG resin for hand-lay.

Polvflex GR 200-19 A general purpose, automotive grade, thixotropic orthophthalic resin.

Polvflex GR 200-22 A corrosion resistant, UV stabilised and translucent isophthalic resin.

204

11 g! II Pi

>41

11 hi

u si

11 i j

7OoC

11 r j

- Neste Polyester Polvflex GR 200-22-1 A filled flame retardant, general purpose isophthalic offering resistance to some chemicals and solvents. Approved by Lloyd’s Registry for marine application.

Polvflex GR 200-22-3 A filled, flame retardant orthophthalic suitable for hand-lay and conforming to IS 6746-1972 Type 5.

Polvflex GR 200-23 A moderately reactive, low exotherm, isophthalic resin specially formulated for pultrusion and offering good wettability and excellent corrosion resistance.

Polvflex GR 200-24 A specially formulated thixotropic isophthalic resin for the boat building industry approved by Lloyd’s Registry.

Polvflex GR 200-25 Offering a very low level of residual styrene, this corrosion resistant isophthalic for hand-lay is CFTRI approved for the fabrication of GRP containers and pipes for the movement of liquid and solid food products (e.g milk, wine, beer, potable water, sugar, rice, dry fruits). Can also be employed for taint-free, chemical resistant liners to vessels made from other materials.

Polvflex GR 20052 A superior thermal and corrosion resistant, hand-lay, chlorendic polyester resin.

Polvflex GR 200-55 An isophthalic resin designed for spray/projection lamination or RTM fabrication. a ; 1.10 11 b l 55% 11 ci 200-250 j i 45mg17 11 k f 112 1 I ! 53

1 d: 11 m!

15

1 ef 11 ni

4-8/25 I] f 2.0% 1 o i

11 gi

i

I

Pi

240

11 hi II qi

1i I

90%

11 r i

A 300E An amine accelerated, short geltime orthophthalic suitable for RTM, cold-press moulding and vacuum/pressure bag. a! 11 b i 61% 1 c f j 23mg/24 11 k ; 110 1 I f

360 70

11 di

11 rnf

3.8

11 e! 1 ni

8/23 11 f 3.5% 101

i

II si II Pi

1 hf II q!

11 i i 9 5 0 ~ 11 r !

continued:

205

Databook - Section 0 8 :Unsaturated Polyester Resins For Laminating & Associated Purposes Neste Polyester - continued:

F 804TF An unaccelerated, filled HET-acid based, flame retardant resin meeting the M I classification and suitable for hand-lay and spray/projection lamination.

F 820 An unaccelerated, clear, flame retardant resin meeting the M2 classification, suitable for hand-lay and RTM.

F 892 An unaccelerated, HET-acid based, clear, flame retardant resin meeting the M3 classification and suitable for hand-lay and continuous lamination.

G 102TA A preaccelerated, general purpose (hand-lay and spraylprojection), .orthophthalic resin, offering a short geltime. 58% 11 c i k i 100 11 I f

11

ai bi j 19mg/24

1200 55

11 d f 11 e; 11 mi 4.0 ]I n f

20/23 2.0% 01

11

11 f f

II pi II Pi

11 h[

I 4;

11 i i 68OC 11 r l

e. 45/23 A long geltime variant of G 102TA. An unaccelerated variant of G 102TA. e. 30123 An unaccelerated, non-thixotropic variant of G 102TA, suitable for RTM and continuous c. 300 e. 20123 lamination. b. 60%

G 102TB G 102T G 102

G 103E A preaccelerated, medium viscosity orthophthalic resin suitable for cold-press moulding, filament winding, vacuum/pressure bag and continuous lamination.

G 105E

A preaccelerated, low viscosity orthophthalic resin for RTM ai 11 b f 59% j j 19mg/24 k f 90

11

206

1 ci 11 I

180 55

11 d f 11 e ! 11 mi 4.1 11 ni

13/23 11 f 2.0% 11 o f

II si Pi

11 hi I qi

11 i I 66OC 11 r i

- Nesfe Po/yester G 193L An unaccelerated, UV stabilised orthophthalic resin for the continuous lamination of translucent sheeting. Can also be employed for vacuumlpressure bag techniques.

G 194L An unaccelerated, UV stabilised orthophthalic resin for the continuous lamination of translucent sheeting. Can also be employed for vacuumlpressure bag techniques.

G 200LE A preaccelerated, UV stabilised orthophthalic resin for the hand-lay manufacture of translucent sheets and similar products. Can also be employed for RTM and vacuum/pressure bag techniques.

G 300TA A preaccelerated, general purpose (hand-lay and spray/projection), thixotropic, short geltime, orthophthalic resin.

e. 45123

A long geltime variant of G 300TA.

G 300TB

K 530 An unaccelerated, non-thixotropic, chemical resistant, isophthalic based resin suitable for RTM, centrifugal casting, filament winding, vacuum/pressure bag and continuous lamination. ai 11 bi 62% 11 c f j 18mg123 11 ki 125 11 I i

800 65

11 di 11 ei I] mi 3.3 11 ni

12/23 11 f 2.5% 11 o j

i

I si II Pi

11 h ( II 4 !

11 i i 93% 11 r i

An accelerated, higher viscosity, thixotropic variant of K 530. c. 1200 b. 56%

K 530TE

M 105TA A preaccelerated, general purpose (hand-lay and spray/projection), LSE, thixotropic orthophthalic, offering a short geltime.

11 bi

a!

j

19mg/24

105TB 105TC 105T 105TBR M lO5TUE

M M M M

11

59% 11 c i k ! 90 11 I

1200 55

11 d i

11 m/

4.1

11 e : 11 ni

20/23 2.0% 11 o i

A long geltime variant of M 105TA. A very long geltime variant of M 105TA. An unaccelerated variant of M 105TA. A long ‘green stage’ variant of M 105TA. A warm climate stabilised variant of M 105TA.

11 f i

U pl Pi

e. e. e. e. b.

40123 60/23 30/23 45/23 62%

11 hi I ql

c. 1400

11 i 66OC 11 r:i

e. 50123

M 530TE

A preaccelerated, general purpose (hand-lay and spray/projection), LSE, thixotropic, isophthalic based resin.

continued: 207

Databook - Section 0 8 :Unsaturated Polyester Resins For Laminating 8 Associated Purposes Neste Polyester - continued: S 380 An unaccelerated, high reactive, orthophthalic resin suitable for pultrusion.

S 599TE

A preaccelerated, thixotropic variant of S 599, suitable for hand-lay and spray/projection lamination. b. 56% e. 20/23

S 703 A highly flexible resin for centrifugal moulding.

Dvnopol 2112 A preaccelerated, thixotropic general purpose orthophthalic resin containing wax. e. 15 - 18/23 i. 69OC n. 2.0% Dvnopol 2116F As for 21 12 but without the wax addition. DvnoRol 2421 A clear, preaccelerated UV stabilised, non-thixotropic orthophthalic resin designed for the manufacture of translucent roof sheeting. e. 30 35/23 i. 66OC n. 2.0%

-

DVnOROl 2529 A preaccelerated, thixotropic orthophthalic laminating resin containing wax, offering better water resistance and mechanical properties than either 2112 or 2116F, and suitable therefore for the manufacture of water i. 72OC n. 2.3% tanks and pipes. e. 10 - 15/23 DvnoRol 2530 A wax-free version of 2529. There are two further variants. 2530B

As for 2530 but exhibiting a longer gel time. e. 20 - 25/23

2530C

A higher thixotrophy version of 25308.

Dvnopol 2625 A preaccelerated, non-thixotropic, high temperature and chemical resistant, isophthalic resin containing a i. 13OOC n. 1.7% small wax addition, for filament winding applications. e. 25 - 30/23

208

- Reichhold Chemicals Inc DvnoRol 2827 An unaccelerated isophthalic laminating resin, without wax, for boat hull fabrication. e. 40 45/23 i. 750C n. 3.7%

-

Dvnopol 2834 A slightly higher viscosity version of 2827 offering a faster geltime and suitable for general lamination where a good degree of water and chemical resistance with good mechanical properties is required. e. 25- 30/23 i. 75OC n. 3.7% DVnOROl 21032 A Lloyd's Registry approved, preaccelerated orthophthalic laminating resin for boat manufacture, without a i. 55OC n. 3.3% waxaddition. e. 25 - 30/23 N.B The company also import the following Norpol resins of Jotun Polymer (now Reichhold) manufacture as standard. See the appropriate section for their description. Other grades can be supplied depending on demand.

420-100

440-M8501

720-0901

720-8001

830-m2501 (a 830-M7501)

850-M2501

Silmar S249lS249A An orthophthalic hand-lay polyester with exceptionally good colour and which cures water white in laminates or films. Exhibits fast wetout and as well as being suitable for use in meat and poultry processing facilities, is ideal for the manufacture of surfboards.

-

N.B. Thk listing only a selection of Reichhold polyester resins www.Reichhold.com.

-

is understood to be similar to that now appearing under,

Atlac 400-15 (33425640) A terephthalic resin offering, compared to the isophthalics, a premium corrosion resistance together with improved toughness and a higher heat distortion temperature. Suitable for hand-lay, spray/projection and filament winding. c. 350-500 e. 20-24/25 Dion 6246 (31509-01) An isophthalic for RTM and low-pressure press moulding, offering excellent corrosion resistance in mineral acids and strong salt solutions up to 65OC. c. 205-245 e. 9-16/25 Dion 6631T A highest possible, molecular weight isophthalic offering high performance for the open-mould fabrication of e. 13.5 1 6 3 2 5 corrosion-resistant and construction components. c. 450-650

-

Dion 8101-00 (31020-01) A high reactive isophthalic designed for pultrusion but also applicable to press moulding. e. 3-4/25 c. 500-600 31020-03

An alternative viscosity version.

c. 2300-2700

continued:

209

Databook - Section 0 8 :Unsaturated Polyester Resins For Laminating & Associated Purposes

Reichhold Chemicals Inc - continued: Dion 31033 (31033-02) A high reactivity, low shrink isophthalic designed for pultrusion where crack resistance, dimensional stability and smooth surfaces are essential. c. 1500 e. 4/25 Dion FR 7704-00 A blended flame retardant polyester (Class 1 with 3% antimony trioxide) for open-mould applications. Dion FR 7767-00 An isophthalic blend resin for open-mould application offering Class 1 flame spread resistance with an antimony trioxide addition. c. 600 e. 20/25 Polvlite 31501-06 & 31501-10 A series of orthophthalic resins designed for RTM and other low-pressure press moulding. Excellent for thick section components where the potential for stress cracking is greater. c. 150-170 e. 06 = 7-9/25 and 10 = 16-20/25. Polvlite 31-502 A low viscosity, high filler loading DCPD based resin, very suitable for RTM and press moulding and offering excellent profile properties. c. 260-320 e. 10-15/25 Polvlite 31520-01 & 31520-04 A specially blended resin series for RTM and low press moulding where low-shrink, non-warping and/or a Class A surface is required. c. 01 = 100-130 and 04 = 90-150 e. 6-9/25 Polvlite 32480-00 A resilient orthophthalic suitable for hand-lay and spray/projection lamination. c. 140-180 Polvlite 32737 A clear finishing resin for the surfacing of sailboards, surfboards and boats. c. 375-450

e. 3-6/25 e. 12-15/25

Polvlite 33053-1 0 An orthophthalic resin offering rapid gel and a moderate cure rate as suitable for laminates with thin to medium cross-section. For hand-lay and spray/projection lamination in for example marine construction. c. 400 e. 32/25 Polvlite 330 72-00 Similar to 33053-10. c. 387

e. 115/25

Polvlite 33074-00 An orthophthalic resin for the hand-lay or spray/projection fabrication of small to large components where e. 25/25 high production rates at ambient temperature are required. Noted also for marine use. c. 550 Polvlite 33087-00 A general purpose orthophthalic for hand-lay and spray/projection lamination. c. 450

e. 21/25

Polvlite 33099-03

Similar description to 33074-00. c. 450

e. 13/25

Polvlite 331I 1-05 An orthophthalic resin suitable for hand-lay or spray/projection lamination in the rigidizing of thermoformed acrylic baths and similar objects. c. 150 e. 16/25 Polvlite 33130-00 An orthophthalic designed to provide good wet-out and long trim times in open mould processes. c. 550 e. 22.325

210

- Reichhold Chemicals Inc Polvlite 33131-00 An orthoDhthalic desianed for the open-mould manufacture of thick sections. Its resistance to sagging and e. 16/25 draining on vertical sirfaces is exceilent. Listed as suitable for 'baths and marine' use. c. 500 Polvlite 33150-00 An orthophthalic developed for open-mould applications that require the addition of specific carbonate, e. 21/25 hydrate or sulphate type fillers. c.' 850 POlVlite 33166-10 A low-colour orthophthalic, listed as suitable for open-mould, transportation application use, where the e. 21 3 2 5 addition of mineral fillers is specified. c. 155 Polvlite 33230-17 A DCPD/isophthalic blend resin for open-mould application in for example marine construction, offering a e. 1 3 3 2 5 tough, low-profile property achieving with MEKP a full cure at ambient temperature. c. 425 Polvlite 33233-05 A DCPD/isophthalic blend resin developed for the open-mould fabrication of small to large components where a high production rate at room temperature is required. Suitable for marine use. c. 500 e. 21 25/25 POlVlite 33234-01 & 33234-17 DCPD/isophthalic blended resins developed for the open-mould, ambient temperature fabrication of small to large components at high production rates, and with VOC contents of less then 35%. c. -01 = 600; -17 = 700 e. -01 = 30125; -17 = 162925 Polvlite 33247-00 Similar description to 33233-05.

c. 450

Polvlite 33266-00 Similar description to 33233-05. c. 475

e. 11.5/25 e. 20/25

POlVlite 33341-00 An orthophthalic for the spray/projection deposition of reinforcing laminates to thermoformed acrylic shapes. c. 210 e. 11.5/25 Polvlite 33402-00 A preaccelerated, low viscosity, thixotropic room temperature cure (MEKP or BPO) isophthalic for the spray/projection lamination of corrosion resistant articles. c. 400 e. 12/25 Polvlite 33404-00 Similar description to 33402-00, stated to be suitable for both hand-lay and spray/projection lamination in the manufacture of construction items. c. 350-500 e. 20-24/25 Polvlite 33441-00 A blended, thixotropic flame retardant polyester designed for open-mould use and offering Class 1 with a 3% antimony trioxide addition. c. 550 e. 20/25 Polvlite 33480-00 A preaccelerated, thixotropic terephthalic resin for use in hand-lay, spray/projection and filament winding applications as required for construction and corrosion-resistant use. c. 350-500

21 1

Databook - Section 08 :Unsaturated Polyester Resins For Laminating & Associated Purposes

Wresipol 31360 An unaccelerated, medium reactive, slightly thixotropic, general purpose, fast gel and cure resin with good wet-out properties for hand-lay and spray/projection deposition, and offering LSE characteristics. ai

I]

bi

11 c i

0.23Pa.s

1 d/

1 e!

7/25

1f/

11 g /

40

11 hi

1 ij

65OC

J

Wresipol 31395 A preaccelerated, slightly thixotropic, general purpose resin exhibiting a long gel time and good interlaminar adhesion properties, for hand-lay and spray/projection lamination.

I

ai

11 b i

11 c i

0.23Pa.s

11 d i

1 e;

32/25

11 f i

11 g j

40

11 hj

11 i i

65OC

I

Wresipol 31398 A preaccelerated, slightly thixotropic, medium reactive, general purpose resin with LSE properties, offering good wet-out and a long gel time, for hand-lay and spray/projection deposition.

Wresipol 31402 A preaccelerated, medium reactive, slightly thixotropic general purpose resin with LSE properties, offering a long gel time, for hand-lay and spray/projection lamination.

I a;

11 b i

11 c i

0.23Pa.s

11 d!

1 ei

28/25

1f !

11 gi

40

11 hi

1 i!

65OC

I

Wresipol 3141 1 A chemical resistant, unaccelerafed, isophthalic, non-thixotropic resin suitable for spray/projection deposition, filament winding and press moulding.

I a;

1 bi

1 cf

0.2Pa.s

)I d j

11 e /

40/25

11 f f

1 gi

45

11 h i

11 i

IOOOC

I

Wresipol 31419 A preaccelerated, pre-filled acrylic bath reinforcement resin for spray/projection deposition offering good adhesion.

si Wresipol 31423 A Dreaccelerated, high reactive, acrylic bath reinforcement resin for spray/projection deposition offering high (50%) filler loadingsand good adhesion.

Wresirool 31445 A preaccelerated, medium filler loaded spray/projection deposition resin for the reinforcement of acrylic

212

- Resinous Chemicals Limited Wresipol 31452 A clear, preaccelerated, flame retardant (Class 2, BS 476, Part 7), resin with LSE properties and offering fast cure characteristics for hand-lay and spray/projection deposition.

Wresipol 31455 A preaccelerated, white pigmented, flame retardant (Class 2, BS 476, Part 7), resin with LSE properties and improved cure characteristics, for hand-lay and spray/projection deposition.

I ai

11 b j

1 c!

0.28Pa.s

1 dl

11 e i

20/25

3

Wresipol 31458 A white pigmented, preaccelerated, flame retardant (Class 1, BS 476, Part 7), resin with good wet-out, LSE characteristics, a sharp gel and good cure properties, for hand-lay.

I

a!

11 b f

1 ~i

0.27~a.s

11 dl

11 ei

21/25

If i

11 g!

40

1 hi

u

if

550~

1

Wresipol 31459 A filled, flame retardant (Class 2, BS 476, Part 7), preaccelerated resin, offering LSE properties.

Wresipol 31460 A low viscosity, preaccelerated, white pigmented resin allowing high filler loadings for the reinforcement of acrylic capped ABS, by spray/projection deposition and offeringgood adhesion.

Wresipol 31466 A preaccelerated, slightly thixotropic, general purpose resin with LSE characteristics and offering a long gel time and fast cure, for hand-lay and spray/projection deposition.

Wresipol SUP 302 A special purpose, unaccelerated, isophthalic modified, non thixotropic resin for hand-lay, centrifugal moulding and RTM.

I

ai

11 b !

1 c!

63Pa.s

dj

1)

e!

15/25

]I f j

11 gi

45

1 hi

11 i i

76OC

I

Wresipol UP 092 A general purpose, unaccelerated, high reactivity resin with good heat and improved chemical resistance, for pultrusion, filament winding and press moulding. Also available in a higher viscosity version.

I aj

11 b i

11 c !

0.5Pa.s

1 dj

11 e!

17/25

1fj

11 g;

45

11 h;

I] i

900~

I

Wresipol UP 220 A Lloyd's Register approved, preaccelerated, medium reactive, slightly thixotropic general purpose resin for hand-lay and spray/projection deposition.

I ai

I]

bi

1 ci

0.3Pa.s

11 d i

]I et

23/25

11 f i

11 gi

40

11 h i

11 i i

72OC

I

Wresipol UP 229 A white pigmented, Lloyd's Registry approved, preaccelerated, medium reactive, slightly thixotropic general purpose resin for hand-lay and spray/projection deposition, with LSE properties.

continued: 213

Databook - Section 08 :Unsaturated Polyester Resins For Laminating & Associated Purposes Resinous Chemicals Limited - continued: Wresipol VUP 3300 An unaccelerated, medium reactive, non-thixotropic, Lloyd’s Registry approved, general purpose resin for RTM.

11 b i

ai

11 c i

0.35Pa.s

11 di

1 ei

12/25

11 f

I(

gi

40

1 hf

i

;

72OC

1

Wresipol VUP 9122 A preaccelerated, medium reactive, low viscosity, slightly thixotropic, Lloyd’s Registry approved, general purpose resin for hand-lay and spray/projection deposition, with LSE characteristics.

I a;

1 bi

I] c f

0.23Pa.s

1 d;

11 e f

23/25

11 f ;

11 g /

40

1 hf

1 if

72OC

I

Wresipol VUP 9158 A chemical resistant, preaccelerated isophthalic, slightly thixotropic resin for hand-lay and spray/projection moulding of high specification components. National Water Council approved.

11 b f

a;

(1

cf

0.35Pa.s

11 d l

11 el

21/25

11 f

1 gf

40

11 h i

11 i i

OIOOC

1

Wresipol VUP 9260 A preaccelerated, low viscosity, slightly thixotropic, Lloyd’s Registry approved, general purpose resin for hand-lay and spray/projection deposition, with LSE characteristics and variable gel time properties.

I ai

1)

bi

1 c/

0.23Pa.s

1 d!

]I e ;

20/25

1f

1 gi

40

1 hi

1 ii

65OC

I

HTP-144

A rigid, filled, medium viscosity, high moelcular weight polyester with good wet-out properties, offering high heat distortion and good abrasion resistance and suitable for hand-lay and RTM processing.

HTP-402 An unfilled, medium viscosity, general purpose - hand-lay and RTM - polyester with excellent wet-out properties, that offers high heat distortion and demonstrates excellent resistance to acids and alkalis.

HTP-402-99 A flexible, low reactivity, low viscosity polyester suitable for hand-lay and RTM.

I a/

1.08

11 b j

1 cj

100-2OOcps

11 d:,

1 ef

35-45/25

1

ResiPol 9024 A general purpose, unaccelerated orthophthalic resin for hand-lay and spray/projection lamination. Approved

J i

214

I Pi

I4i

11 r j

- Resisa 9024-BV A low viscosity version of 9024 offering good fibre wet-out at low temperature. Lloyd's Approved. b. 59-62% c. 250-300 e. 9-13/25 9024-EL A UV stabilised version of 9024. b. 60-63% c. 400-500

Resipol 9028 A general purpose, high viscosity, unaccelerated orthophthalic resin for hand-lay and spraylprojection lamination. Approved by Lloyd's for marine application.

Resipol 9042 An unaccelerated, orthophthalic resin for RTM application, offering good impact resistance.

9042-BV

A low viscosity version of 9042. b. 5649%

c. 120-150

Resipol 9044 A neneral purpose, unaccelerated orthophthalic resin for hand-lay and spray/projection lamination offering good mechanical properties and approved for marine application by Lloyd's.

9044-BV A low viscosity version of 9044. Suitable for RTM application. b. 59-62% 9044-EL A UV stabilised version of 9044. b. 61-64% c. 450-500

c. 250-350

Resiaol 9051 An unaccelerated orthophthalic for continuous lamination. ai

I( b i

58-61%

11 c i

160-200

11 di

11 e!

4-5/25

1

Resipol 9058 A quick surface curing, general purpose, unaccelerated orthophthalic resin for hand-lay or spray/projection

Resipol 9074 A low viscosity version of Resipol 9078 - see below. Suitable for cold-press moulding. b. 62-65 c. 500-600 e. 12-16/25 Resipol 9078 A general purpose, unaccelerated orthophthalic resin for hand-lay, spray/projection and cold-press moulding, offering a high heat distortion temperature. Suitable for "industrial components".

Resipol 9090 An unaccelerated, specially formulated resin offering good impact resistance, for the RTM manufacture of sanitary ware.

continued: 215

Databook - Section 0 8 :Unsaturated Polyester Resins For Laminating & Associated Purposes Resisa - continued:

Resipol 9104 A general purpose, preaccelerated, orthophthalic resin offering a short gel-time and therefore, quick demoulding, suitable for hand-lay and spray/projection lamination.

..

..

J i

.. Ji

11 k i

118

11

..

11 k i

96

..

I] k j

108

J i

II Pi

qi

11 r ]

66

11 m(

3.4

11 n!

3.0%

11 oi

Pi

qi

11 r j

I] I

54

11 mi

3.9

11 n;

1.7%

11 o!

Pi

qi

11 r j

)I I i

59

[I mi

3.9

1 ni

1.7%

1 of

Pi

4i

11 r i

Ij

Resipol 9142 A preaccelerated, general purpose, thixotropic orthophthalic resin offering quick demoulding for hand-lay and spray/projection lamination. Approved for marine application by Lloyd’s Registry. af .. I!

216

11 b f

54-57% c j 350-500 108 1 I j 59

11 k f

11 d j 11 mi

3.9

1 e! 20-25/25 1 f j 11 n j 1.7% I] o j

II pi II Pi

1 hi II qi

1 if

65OC rj

- Resisa Resipol 9144 A preaccelerated, general purpose, thixotropic orthophthalic resin offering a short gel-time and quick demoulding for hand-lay and spray/projection lamination. Approved for marine application by Lloyd's. a]

..

I] bi

Ji

5447% 11 c i 350-500 108 1 I j 59

11 k j

1 dj 11 mi

3.9

11 el 8-14/25 11 f ] 11 n i 1.7% 1 oi

I g;

I Pi

11 hl

I 41

11 i 1

65OC

11 r :

ResiRol 9148 A Dreaccelerated. general purpose, thixotropic orthophthalic resin with a low peak exotherm for hand-lay and spray/projection lamination. Approved for marine application by Lloyd's Registry.

ResiRol 9154

A preaccelerated, general purpose, thixotropic orthophthalic resin with good mechanical properties and offering a long gel-time, for hand-lay and spray/projection lamination.

ResiRol 9176 A preaccelerated, UV stabilised LSE orthophthalic resin suitable for filament winding.

a;

1 bi

5447%

11 c1

350-500

11 di

11 ei

15-21

1 f;

si

11 hf

11 i

j

65OC

Resipol 9182 An LSE version of 9142 - see above.

-

ResiRol 9184 An LSE version of 9144 see above. ResiRol 9188 An LSE version of 9148 - see above.

..

J i

Pi

u 41

11 r f

continued: 217

Databook - Section 0 8 :Unsaturated Polyester Resins For Laminating & Associated Purposes Resisa - continued:

II Pi

1;

11 r i

qi

Resipol 9262 An unaccelerated, orthophthalic resin for pultrusion, offering medium production speed. ai i !

I( b;

11

62-65% 11 c i 500-600 11 d ! ki 92 11 I i 54 I( mi

39

11 ei

11 n i

8-10/25 15%

1f

11 o i

I s,!

11

11 hj

1I ai

Di

1 ii

II r

96°C i

Resipol 9264 An unaccelerated, orthophthalic resin for pultrusion, offering high production speed.

Resipol 9274 An unaccelerated, isophthalic resin for pultrusion, offering high chemical resistance.

ai .. li

11 bi

63-66% 1 c i 800-1100 143 1 I 72

11 k !

I(

di

11 mi

3.3

11 e! 25-30/25 11 f i I] n i 3.5% 11 o ]

A low viscosity version of 9274. b. 5649%

9274-BV

I si

II Pi

11 hi

u 4:

11 i i

I]

105OC

ri

c. 300-400

Resipol 9284 An unaccelerated, maleic acid resin for pultrusion, offering a good surface finish with low profile additives.

Resipol 9414 An unaccelerated orthophthalic resin offering high elongation, for use by RTM.

Resipol 9427 An unaccelerated, semi-rigid, specially formulated isophthalic resin for filament winding. ai

.. Ii

11 bi

61-64% 98

11 k j

11 c i 300-400 11 dl 11 I 69 11 mi

2.5

1 el 18-22/25 1 f 11 n j 5.3% 1 oi

I gi

II Pi

1 hi II si

ii

65OC

11 r i

Resipol 9437 An unaccelerated, orthophthalic resin offering high elongation for the manufacture of continuous sheeting. aj

.:

11 b i

68-71% 1 c ! 550-650 118 11 I 61

11 k i

]I dj 11 mi

3.4

11 e! 25-30/25 11 f i 1 n f 4.0% 11 oi

II 91 II Pi

11 hi II q!

11 i i 77Oc 11 r i

Resipol 9544 An unaccelerated, general purpose, medium viscosity isophthalic resin with a high heat distortion temperature and offering good chemical resistance for hand-lay, spray/projection and filament winding lamination. Suitable for pipe manufacture.

218

- Resisa Resirool 9548 An unaccelerated, high viscosity isophthalic resin for filament winding and suitable for pipe manufacture. Approved by Lloyd's Registry.

ResiDol 9588 An unaccelerated, general purpose isophthalic resin offering good chemical resistance and with a high elongation, for hand-lay, spray/projection and filament winding. Suitable for pipe manufacture. Approved by Lloyd's Registry.

9588-BV A low viscosity version of 9588. c. 300-350 m. 3.5 9588ST An inhibited version of 9588 for use in tropical countries.

b. 64-67%

c. 700-900

Resirool 9638 An unaccelerated, general purpose, thixotropic isophthalic resin offering high elongation, for hand-lay and spray/projection lamination. Approved for marine application by Lloyd's Registry. af

..

1 bi

J i

5447% 11 c f 350-500 123 11 I i 69

11 ki

11 di 1 mi

3.4

1 el 18-22/25 f i 1 n i 4.0% 11 oi

I sl N P(

11 h( II 41

11 i f

85OC

1r i

Resirool 9654 A preaccelerated, general purpose, thixotropic isophthalic resin offering a high heat distortion temperature and good chemical resistance, for hand-lay and spray/projection lamination.

Resirool 9655 A preaccelerated, general purpose, thixotropic isophthalic resin offering - a low peak exotherm and a high elongation, for hand-lay and spray/projection-lamination.

Resirool 9696 An unaccelerated, isophthalic/NPQ resin offering good hydrolysis resistance and high elongation. Very suitable as a liner resin.

Resirool 9698 A preaccelerated, thixotropic isophthalic/NPG resin offering good hydrolysis resistance and a high heat distortion temperature. a . .f

J i

11 b J 5 1 4 4 % 1 C: 600-800 I di 11 ki 88 11 I i 54 11 mf

3.4

11 e! 20-26/25 1 f 11 ni 2.7% 11 o f

II g.1 II Pf

I hi

I ql

I ij

117OC

1r j

Resirool 9699 An unaccelerated, specially formulated resin for filament winding and the production of underground fuel storage tanks.

continued: 219

-

Databook Section 0 8 :Unsaturated Polyester Resins For Laminating & Associated Purposes Resisa - continued: ResiRol 9740 An unaccelerated flame retardant, filled HET acid resin meeting the French M2 approval, for hand-lay and spray/projection lamination.

ResiDol 9770 An unaccelerated, specially formulated brominated flame retardant resin meeting the French M2 approval, for hand-lay and spray/projection lamination.

ResiRol 9932 An unaccelerated, UV stabilised orthophthalic for the manufacture of decorative laminates, typically by continuous lamination.

ResiRol 9935 An unaccelerated, isophthalic resin offering high chemical resistance for the manufacture of decorative laminates by continuous lamination.

ai ..

1 bj

62-65% 11 ci 550-650 98 11 I 61

11 k!

11 d ! 1 mi

2.6

1 ei 11 n i

2/25 3.9%

11 f

11 o!

II s,; Pi

11 h f

u qi

]I

i

i

52OC rf

Resipol 9937 An unaccelerated adipic resin offering high flexibility, for the manufacture of decorative laminates by continuous lamination.

I aj

1)

b j 67-70%

1 ci

300-400

11 e:

11 d!

26-30/25

1

Resipol 9990 An unaccelerated orthophthalic resin offering good mechanical properties and suitable for cold-press moulding. a. j.

Ji

1 bi

66419% 11 c j 1100-1500 1 k j 108 11 I j 34

11 dj 11 mi

1fi 11 o i

e: 11-15/25

3.8

11 nj

1.8%

II s! II Pi

hi

II si

1 if

IIOOC

11 r i

Crvstic 196 An unaccelerated non-thixotropic, DTD approved, tough, orthophthalic resin offerina excellent mechanical properties, impact resistance a-nd electricalvperforman6e. Recommended for the manufacture of mouldings for land transport, marine and industrial application. Suitable for hand-lay, RTM, filament winding and pultrusion.

220

- Scott Bader Company Limited 196LV

A variant with slightly different properties. Approved by the Wine Laboratories Ltd and if backed with Cfystic 65PA, approved for use with potable water.

196PA 196PALV

A preaccelerated version of 196. A preaccelerated version of 196LV.

Crvstic 198 A non-thixotropic unaccelerated, medium viscosity orthophthalic resin with good heat and chemical resistant properties and offering excellent adhesion to "Celmar". Can be employed in both hot and cold curing applications.

Crvsfic 199 A non-thixotropic, unaccelerated DTD approved isophthalic for electrical applications and high temperature use. i. 13OOC e. 16/25 Crvsfic 272 A non-thixotropic, unaccelerated, high performance, isophthalic for filament winding, pultrusion, centrifugal or contact moulding methods and offering low taint properties. Approved by Lloyd's Registry. Outstanding weathering properties make it suitable for use with continuous roving, carbon and aramid fibre. a f 1.10 11 b f 59% I 18mg/24 k f

11

j

11 c i 11 I i

3.5 79

11 d f 1 rnf

18

11 e f 11 n f

8/25* 4.5%

11 o f

ff 203

11 g! 11 pi

43 112

1 hi 8.3% 1 i ! 78OC 1 qi 7.5 1 r f 1.7%

With 4% catalyst paste (H)

Crvsfic 323PA A preaccelerated, filled and thixotropic flame retardant orthophthalic for general contact moulding, capable of achieving BS476, Part 7, Class 2. Offers durable, excellent mechanical properties and good water resistance for automotive, industrial and marine applications. Lloyd's Registry approved.

An unaccelerated version.

323

Crvsfic 356PA A Rreaccelerated. thixotroRic DBNPG resin which can achieve with Crystic 65PA - BS476 Part 7, Class 1 and Class 0, Building Regulations (Section B). Ideal for use in the building, marine and land transport industries.

-

a! 1.54 1 b i 76% j f 12mg/24 11 k f

11 c! 11 I

f

4.8 45

11 d f 11 mi

15

11 e f 1 nf

12/25 11 f ! 0.7% 11 o f 168

1 g! 11 pi

56 77

11 hi 1 qf

6.9

1 i f 79% 11 r i 1.3%

Crvsfic 357PA (Formerly known as Crystic D 4685PA) A preaccelerated, thixotropic DBNPG resin which in combination with Crysfic 65PA can achieve the French, M1 fire retardant classification. For use by the building and transport industries.

11

ai 1.6 b f 76% j f 15mg/24 1 k f

11 c i 11 I i

6.2 45

11 di 1 mi

11 e: 11 ni

12/25 1.25%

1ff 1 of

11 gf II P i

45

1 hi

I 4;

6.8%

1 i i 94OC 11 r f

continued:

221

Databook - Section 0 8 :Unsaturated Polyester Resins For Laminating & Associated Purposes Scott Bader Company Limited - continued: Crvstic 385PA A preaccelerated, UV stabilised thixotropic, unfilled, flame retardant, isophthalic/HET resin for the contact moulding of continuous sheeting, roof structures, domes and canopies of high translucency, approved Class 2, BS 476 Part 7.

385

An unaccelerated variant.

Crvstic 388 An unaccelerated, non-thixotropic, UV stabilised di-bromo neopentyl glycol (DBNG) polyester for the machine manufacture of sheeting exhibiting good clarity. Will achieve Class 1, BS 476 Part 7 and Class 0, Building Regulations (SectionB). a f 1.33 1 b f 70% j f 24mg/24 11 ki

1 cl 11 I i

2.6 47

1 dj 11 rnf

24

11 e ] 11 nj

7/25 3.4%

11 g f 11 f f 11 o! 159 11 p i

35 107

1 hi 9.3% 11 i ! 67OC 11 q j 6.2 11 r f 2.0%

Crvstic 397PA A preaccelerated, thixotropic, isophthalic/NPG resin offering a low taint property and with very good chemical resistance as well as good adhesive properties to uPVC. Recommended for high performance applications in critical environments. Approved by Wine Laboratories and if backed with Crystic 69PA for use in contact with potable water.

Crvstic 471PALV A preaccelerated, low viscosity, rapid hardening, general purpose, rapid wet-out, thixotropic orthophthalic. Approved by Lloyd’s Registry. Suitable for hand-lay or spray/projection lamination.

Crvstic 474PA A preaccelerated and thixotropic version of Crystic 198. Meets BS 3532, Type C. Cold cure only. b. 62% c. 3.3 d. 23 h. 8.2% Crvstic 489 An unaccelerated, thixotropic, isophthalic resin offering rapid wet-out with freedom from drainage when applied by brush or roller. Has excellent strength retention in wet environments. Approved by Lloyd’s i. 75OC Registry and Det Norske Veritas. e. 23/25 489PA

A preaccelerated version of 489.

Crvstic 491PA A preaccelerated, thixotropic, isophthalic high performance chemical resistant resin offering a low taint i. 75OC performance. e. 12/25 Crvstic 625MV An unaccelerated, non-thixotropic, isophthalic resin for brush or roller application, offering excellent water and heat resistance. DTD approved and also by Lloyd’s Registry. Specially designed for the manufacture of large structures and also for structures operating under tropical conditions. a j 1.13 11 b i 66% j i 20mg/24 11 k ;

625TV 222

1 cj 1) I i

8 70

11 d j 11 m

17

11 ej 1 ni

10/25 3.0% 11 o i

11 f ; 188

11 gl 11 p :

45 105

A thixotropic version of 625. Meets Admiralty Specification DG 1808.

11 h j 11 q i

8% 6.8

11 i i llO°C 11 r i 1.7%

- Scoff Bader Company Limited Crvsfic 780 An unaccelerated, non-thixotropic orthophthalic resin designed for closed mould processing such as RTM. e. 5/25 i. 81°C Crvsfic 1355PA A Dreaccelerated. filled, flame retardant rapid wet-out polyester designed as an inexpensive resin in ‘a restricted range of colours - for contact moulding. Can achieve BS 476, Part 7, Class 1.

- supplied

Crvsfic 2-406PA A preaccelerated, thixotropic, LSE orthophthalic resin offering rapid wet-out and a low exotherm. For handlay and spray/projection lamination. Fully cured laminates show good water resistance and mechanical properties. Ideal for multi-layer laminates and for boat hulls, vehicle bodies and industrial mouldings. Approved by Lloyd’s Registry.

Crvsfic 2-414PA A preaccelerated, thixotropic, LSE orthophthalic resin suitable for application by brush or spray deposition, offering rapid wet-out, a low exotherm and a fast mould turn round. Ideal for thick multi-layer laminates. Approved by Lloyd’s Registry. a i 1.10 11 bi 60% j i 15mg124 [I k i

11 c i 4.6 I I ; 53

11 dj 16 [mi

11 ej 1 ni

39/25 2.0%

11 gj

11 f j

01

166

pf

46 89

11 hi 8.2% 1 i 1 61OC 1 q i 6.4 Ir i 1.5%

Crvsfic 2-420PA A preaccelerated, thixotropic, .LSE orthophthalic, low exotherm resin, having a long gel time to permit the moulding of large structures and multi-layering. Suitable for hand-lay and spray/projection deposition. Approved by Lloyd’s Registry. Available pigmented white. ai 1.1 11 bi j f 20mg/24 11 k i

1 cj 11:

4.2 46

11 d f [nj

2.2

11 el 1 ni

u

f 65/25 1.3% 1 o f 200

1 g f 41 11 hi 1 pi 108 1 q!

1i 6.2

I rf

56OC 1.9%

Crvsfic 1355PA A preaccelerated, thixotropic, flame retardant orthophthalic resin which achieves Class 1, 85476 Part 7. i. 8OoC e. 12/25 2-1 355PA An LSE version of 1355PA. Crvstic 2-8500PA A preaccelerated, thixotropic, LSE general purpose, orthophthalic resin. e. 17/25

i. 65OC

Filabond 2-8500PA A preaccelerated, LSE, rapid wet-out, thixotropic orthophthalic for general purpose non-critical and industrial applications, available in several standard colours. It is not suitable for boat construction or for mouldings requiring chemical resistance or having contact with foodstuffs. ai 1.12 11 bi 57% j j 15mg/24 11 k j

11 c: 1Ii

50

11 dj 11 m/

11 ej 1 nj

17/25 1 f f 1.5% 11 o f 190

11 gf 1 pf

42 98

11 h f 11 q i

7.4

1 i i 67OC 1 r i 1.7%

223

-

Databook Section D8 :Unsaturated Polyester Resins For Laminating & Associated Purposes

261 HR An unaccelerated, non-waxed, rapid-cure, thixotropic, specially modified orthophthalic resin, designed for the manufacture of linings either by hand-lay or spray/projection deposition. Fully cured mouldings exhibit high structural performance, superior resistance to heat, weak acid, alkaline and mild chemical corrosion. The resin is also suitable for filament winding, centrifugal moulding and pultrusion.

u b!

a!

j

! 0.18%/7 11 k i

91

1 ci 11 I 1

4-5 50

I[ di 11 e! 11 mj 3.3 11 ni

15 - 18/30 11 f

1 0:

II si

u P!

1 h! II 41

11 i ! 151OC 1r !

268 Series A range of general purpose orthophthalic-based laminating resins, having the following typical properties and available in the various grades shown after the tabulation.

268 BQT

Preaccelerated and with a wax addition.

268 BQTN

An unwaxed version. Lloyd’s Register approved.

268 QN

An unaccelerated, non-thixotropic, non waxed version. Lloyd’s Register approved.

268 QT

An unaccelerated version with a wax addition. Lloyd’s Register approved.

268 QTN

An unaccelerated version, without wax addition. Lloyd’s Register approved.

-

268 BQT LSE

-

268 BQTN LSE

-

268 QT LSE

-

268 QTN LSE

Lloyd’s Register approved.

An LSE version of 268 BQT. An LSE version of 268 BQTN. Lloyd’s Register approved. An LSE version of 268 QT. An LSE version of 268 QTN

2671L & 26718 An unaccelerated, rapid curing translucent orthophthalic resin containing wax, designed for the continuous manufacture of corrugated and plain roofing sheets. Grade L, which is suitable for hand-lay and spray/projection lamination, has a lower viscosity than S, and both can be supplied accelerated. Some e. 18 - 22/30 colourants can be added to grade S. c. 3 - 4 3254 Series A range of general purpose isophthalic-based laminating resins, having the following typical properties and available in the various grades shown after the tabulation. All are Lloyd’s Register approved.

3254 BQT

A preaccelerated,thixotropic version with wax addition.

3254 BQTN

A preaccelerated,thixotropic non-waxed version.

3254 QN

An unaccelerated, non-thixotropic, non-waxed version.

3254 QT

An unaccelerated, thixotropic version with wax addition.

3254 QTN

An unaccelerated, thixotropic, non-waxed version.

3254 BQTN-LSE

A preaccelerated, thixotropic, non-waxed, LSE version.

224

- Sirca SPA

HPR A102 A LSE orthophthalic which is very suitable ,dr filament winding. Does not contain paraffins or wax. a \ 1.11

.. Ji

1 bl

1

68% c f 400mPas 11 d! 32 120 I i 65 mi 3.4

11 ki

11

u

ef

12/25

ni 2.5%

1 oi

1ff

12

1gf

u P!

45

1h] II 41

8%

11 i11 f r i 8OoC

HPR A102 M35 A preaccelerated orthophthalic resin of low styrene content, designed for the manufacture of insulated vans for the transportation/storage of food. Particularly suited to manufacture by vacuum bag technology.

HPR A102 M60 A preaccelerated orthophthalic resin of low styrene content, designed for the manufacture of insulated vans for the transportation/storage of food. Contains a colour change additive to denote cure.

HPR A102 MA A preaccelerated orthophthalic resin of low styrene content, designed for the manufacture of insulated vans for the transportationlstorage of food. Particularly suited to manufacture by vacuum bag technology.

HPR A102 TA A preaccelerated, thixotropic, orthophthalic general purpose resin of low styrene content and containing a colour change additive to denote cure.

HPR A102 RM

A version of HPR A I 02 TA for RTM.

HPR A172 TA A Dreaccelerated. low stvrene emission, thixotropic general purpose resin free of paraffins or waxes, with reduced delamination characteristics, and containing a colour change additive to denote cure.

HPR CH75 TA A preaccelerated, thixotropic general purpose resin containing a colour change additive to denote cure.

HPR E116 TA A greaccelerated. low styrene emission, thixotropic orthophthalic resin free of paraffins or waxes, with reduced delamination characteristics and containing a colour change additive to denote cure. af

..

1.11

Ji

1 b f 75% 11 c f 1600 u d f <30 1 e f 15/25 11 f f 11 k f 110 11 I ! 55 1 mi 4.2 11 n! 2.0% I] o i

8

g f 45 Pf

u

1 h f 8% 1 i f 7OoC II s f I] r i

continued: 225

Databook - Section 0 8 :Unsaturated Polyester Resins For Laminating & Associated Purposes Sirca SpA - continued: HPR L108 FC A medium reactive, low viscosity and UV stabilised orthophthaiic resin formulated for the manufacture of corrugated sheeting.

HPR N103 A general purpose orthophthalic resin. ai .. J i

1.11

11 b ] 65% 1 c i 450 11 d; >30 11 e; 10/25 11 f j 11 k i 110 1 I ] 55 11 mi 4.0 11 ni 2.0% 11 01

8

11 g i I Pi

45

11 h] 8% 1 i 7OoC I qi 1r i

HPR N103 MAT A preaccelerated, thixotropic general purpose orthophthalic resin, containing a colour change additive to denote cure. Also strongly recommended for boats.

HPR N103 TA A preaccelerated, thixotropic general purpose orthophthalic resin, containing a colour change additive to denote cure. Also strongly recommended for marine application. a; i i

1.11

1 bj 11

ki

59% 11 c i 1600 1 di €30 11 e; 18/25 1 f i 110 11 I ! 55 11 mi 4.2 11 ni 2 0 % 11 o !

1 g: II

45

1 hf

8%

II ni

Di

11 i f

Ir

7OoC i

HPR N380 TA A preaccelerated, thixotropic, isophthalic resin containing a colour change additive to denote cure and specifically designed for marine application.

HPR PI38 An isophthalic/orthophthalic resin suitable for pultrusion and designed to be formulated with mineral fillers.

I ai

1.08

11 b j

62%

11 c i

230mPas

11 d f

28

11 e ;

Ilfi

7

I

HPR PI39 A A preaccelerated, orthophthalic for RTM.

HPR P18OLP A low-profile orthophthalic suitable for pultrusion.

HPR P349 An isophthalic resin suitable for pultrusion.

HPR P380 AR A preaccelerated, low viscosity isophthalic for RTM. a i 1.11

..

226

11 b i

59% 1 c i 3OOmPas 1 d i 18 120 1 I i 65 11 mi

11 k i

11 e; IIni

12/25 4% 110:

11 f i

4

1 gi II Pi

50

11 h f II q!

8%

1 i i 95OC 11 r i

- SIR Industriale

Sirester EC 0947/AT A preaccelerated, special ecological thuixotropic orthophthalic resin, offering good mechanical properties.

A rapid cure version of EC 0947/AT.

EC 0947/AMT

Sirester EC 9120 A preaccelerated, special ecological orthophthalic resin, suitable for silos.

Sirester EC 9250 An unaccelerated, special ecological orthophthalic resin, suitable for hot moulding at typically 120OC.

Sirester ES 0856 A flame retardant, unaccelerated system. (No further description provided.)

A preaccelerated version of ES 0856, suitable for RTM fabrication. A preachlerated and thixotropic version of ES 0856. A mineral filled (ATH) version of ES 0856 with enhanced flame retardancy (M2).

ES 0856/AR ES 0856/AT ES 0856/X

Sirester ES 0871/X A mineral filled (ATH) flame retardant, unaccelerated system.

1a j

11 bj

83%

11 c j

1700mPas

di

u ej

10/25

]

Sirester ES 0880 An unaccelerated, UV stabilised, flame retardant system for the machine manufacture of translucent sheeting.

Sirester ES 0906/A A preaccelerated, flame retardant, isophthalic resin suitable for compression moulding at 70-80°C.

Sirester ES 0925/M2 An unaccelerated, high reactive, flame retardant (M2) system. a!

..

11 b j

73% 11 c i 450rnPas 1 di 35 80 11 I i 50 11 mi 3.5

11 ki

ES 0925/M2/R

11 e: 11 n f

7/25 1.5%

11 oi

f:

4

1 gi

u Pi

60

1 hi

I qf

1 i i 85OC 1r i

A ES 0925/M2variant for continuous lamination and RTM. b. 75% c. 150mPas

continued:

227

Databook - Section 08 :Unsaturated Polyester Resins For Laminating 8, Associated Purposes SIR lndustriale - continued: Sirester FS 81 A preaccelerated, general purpose, reduced styrene emission, orthophthalic.

Sirester FS 0794 An unaccelerated, medium viscosity and reactivity orthophthalic suitable for vacuum bag fabrication.

Sirester FS 0830 An unaccelerated, medium viscosity and reactivity orthophthalic suitable for compression moulding at 70-

75%.

FS 0830lAM

A preaccelerated version of FS 0830. Other versions, AM20; AM40 and AM60 offering faster cure are available.

Sirester FS 0895lP An unaccelerated, high reactivity, orthophthalic resin offering excellent mechanical properties, designed for pultrusion.

Sirester FS 0910 An unaccelerated, general purpose, orthophthalic. ai .. 1;

11 b;

70% 11 ci 110 11

11 k j

I

500mPas dj 20 60 1 mi 3.9

11 ei 11 ni

12/25 2.0%

10:

11 f i

4

1 gj

I Pi

70

1 hi

I qi

11 i i 1OOoC 1r i

Sirester FS 0918 An unaccelerated, medium reactive UV stabilised orthophthalic for the manufacture of continuous laminates at ambient or elevated temperature.

1 ai

I] bi

60%

1 ci

200rnPas

1 d!

30

I] el

6/25

1fj

4

1 gi

11 hi

1i i

65OC

J

Sirester FS 0926lMTR An unaccelerated, high reactive, orthophthalic suitable for RTM fabrication.

Sirester FS 0940lR An unaccelerated, low viscosity, fast cure, orthophthalic resin offering good mechanical properties and suitable for RTM fabrication. a] .. 1:

bi

62% 11 c i 150rnPas 11 d [ 20 110 11 I f 65 11 mi 3.8

11 k j

11 e;

11 n i

7/25

2.0%

11 oi

1f j

Sirester FS 0956 An unaccelerated, low styrene content, general purpose orthophthalic.

5

11 g f

u P!

60

11 hi I qi

i 85OC 1r i

i

- SIR Industriale Sirester FS 0956/AM A preaccelerated low styrene content, fast cure orthophthalic offering excellent mechanical properties. aj .. li

1 bj

70% 11 c i 350mPas 11 d f 30 110 11 I i 65 1 ml 3.8

11 k i

40/25 11 f f n f 2.0% 1 0 ;

11 e!

gf

65

I PI

1 hi

u s!

11 i f 85OC 11 r j

Sirester FS 0956/PMS An unaccelerated, LSE, ecological orthophthalic resin with PMS monomer

Sirester FS 1145 A preaccelerated, thixotropic, general purpose orthophthalic having a low exotherm. Excellent for PMMA reinforcement.

Sirester FS 1210 An unaccelerated, medium reactive and viscosity, UV stabilised orthophthalic, suitable for continuous lamination.

I a!

11 bi

66%

cf

450mPas

1 dj

33

11 e!

3/25

1f f

I hf

11 gl

4

1i i

7OoC

1

Sirester FS 1214/C An unaccelerated, UV stabilised orthophthalic for continuous lamination at ambient temperature, offering good transparency.

I ai

1 bj

67%

11 c i

500mPas

11 d f

35

11 e;

5/25

fi

5

11 hi

gf

ij

65OC

]

Sirester FS 3130 An unaccelerated, general purpose, orthophthalic resin approved for foodstuff applications. ai

..

11 bf

63%

11 k f

11 C! 300m~as 11 d j 30 1 ej 100 11 I f 60 11 mi 3.9 11 n!

10/25 2.0%

u oi

If i

5

11 gi

u Pi

60

Ih f

u 41

11 i j 7 5 0 ~ Ir i

Sirester FS 4131 An unaccelerated, high reactive, low viscosity, UV stabilised orthophthalic for continous lamination and developed to provide a short curing cycle.

I aj

11 bj

68%

1 c!

2OOmPas

11 dj

33

el

11/25

1ff

1 hf

11 gj

3

11 i j

82OC

I

Sirester FS 421PIE An unaccelerated, UV stabilised orthophthalic for continous lamination and developed to provide a short curing cycle at low temperatures.

Sirester FS 4230 A general purpose unaccelerated orthophthalic offering good mechanical properties. ai

..

11 bi

u

65% 1 c! 500mPas 1 d! 30 k f 100 If 60 11 mi 3.9

11 e;

u

10/25 1 f f n f 2.0% 11 0 ; .

5

11 g f

60

1 hi II s!

1 i f 75% 1r i

11 gj

65

1 hi II si'

1 i j 8OoC 1r f

u Pf

Sirester FS 4424 An unaccelerated, general purpose, orthophthalic. ai

..

11 b f

continued:

67% 11 c f 950mPas 11 d f 27 110 11 I j 60 11 mi 3.9

1 kj

11 e ] 1 nj

8/25 2.0% 1 o i

11 f j

7

I

PI

229

-

Databook Section 08 :Unsaturated Polyester Resins For Laminating & Associated Purposes

SIR lndustriale - continued: Siresfer FSL 0870 An unaccelerated, orthophthalic based resin for dielectric laminates.

Siresfer FSN 0850/AT A preaccelerated,thixotropic orthophthalic resin approved for marine application by Lloyd's Registry.

FSN 0850/T

An unaccelerated version of FSN 0850/AT.

FSN 0850IAMT

A fast cure version of FSN 0850/AT. FSN 0850/AMT/E Similar to FSN 0850/AT, suitable for larger vessels.

e. 60/25

Sirester FSW 0935 A high reactive, unaccelerated, high heat distortion orthophthalic, designed for filament winding.

Siresfer HP 7 A special unaccelerated isophthalic with high elongation and chemical resistance.

Siresfer IS 0460 An unaccelerated isophthalic offering excellent chemical resistance, suitable as a filament winding/liner resin.

Siresfer IS 0841 An unaccelerated isophthalic offering excellent chemical resistance and high elongation, and designed for filament winding. ai

11 b j

IS 0841/R

62%

1 c]

550mPas

11 d ]

15

11 e ]

A variant suitable for RTM. b. 60%

19/25

11 f ]

7

11 g f

60

11 h ]

c. 300mPas

Siresfer IS 0842 An unaccelerated, flexibilised isophthalic with a very high elongation, suitable for blending.

230

- SIR Industriale Sirester IS 0864/P An unaccelerated, high reactive isophthalic with excellent chemical and fatigue resistance, suitable for

Sirester IS 0886/D An unaccelerated isophthalic for RTM application with self-release characteristics.

Sirester IS 0896/P A medium reactive, unaccelerated isophthalidNPG resin offering excellent chemical resistance, for pultrusion.

Sirester IS 0943/R A preaccelerated, low viscosity, fast cure, isophthalic offering excellent mechanical properties, for RTM application.

Sirester IS 4240 An unaccelerated, high reactive, isophthalic resin approved for foodstuff application.

Sirester IS 4245 A preaccelerated, thixotropic isophthalic, suitable for foodstuff application.

Sirester ISL 0963 An unaccelerated isophthalic for dielectric laminates. ai

..

11 b !

J i

61% 11 c j 700mPas 11 d! 20 100 I 70 11 mi 4.0

11 k !

11 ei 11 ni

1fi 2.0%

10

11 0 :

1 gi H P';

60

hi

II s!

11 i 1 115OC Ir i

Sirester ISN 0841/AT A preaccelerated, thixotropic isophthalic for marine application, Lloyd's Registry approved. ai .. J i

11 bi

62% 11 c i 120 11 I i

11 k i

ISN 0841/AMT

11 d! 70

mf

15 4.2

11 e! 11 n f

18/25 1 f 3.0% 11 o f

i

10

11 g f

u Pf

60

1 h! H 4:

1 i j 9OOC 1r i

A faster cure version of ISN 0841/AT.

Sirester ISW 100 An unaccelerated, high reactive isophthalic for filament winding.

continued: 231

Databook - Section D8 :Unsaturated Polyester Resins For laminating & Associated Purposes SIR lndustriale - continued: Sirester ISW 200 An unaccelerated, high elongation, isophthalic for filament winding.

Sirester ISW 0936 An unaccelerated, isophthalic for filament winding.

Sirester ISW 0946 An unaccelerated, isophthalic for filament winding.

Viapal H 220 A medium reactive, medium viscosity orthophthalic for low tension laminates, offering little brittleness, good optical and mechanical properties. b. 66% c. 1100-1400 Viapal H 225 A low viscosity version of H220 offering rapid and good wetting of both fillers and reinforcement. C. 350-510 b. 60%

H 225E Offers enhanced storage over H 225. c. 325-490 Viapal H 228 A high reactivity, rapid wetting, low viscosity orthophthalic offering enhanced dimensional stability at c. 125-215 elevated temperature. Suitable for RTM with wall thicknesses up to 3mm. b. 55% Viapal H 240s A very low viscosity, UV stabilised, high reactivity system containing methyl-methacrylate and suitable therefore for highly transparent flat roof sheets produced at room temperature by hand-lay. C. 90-185 b. 53% Viapal H 2628 A medium reactive, medium viscosity UV stabilised isophthalic resin offering enhanced strain at break, and c. 1000-1200 suitable for thick laminates produced by pultrusion. b. 66% Viapal H 265 A high reactivity, medium viscosity, high impact strength orthophthalic offering high impact strength and excellent resistance to aromatic hydrocarbons; suitable for laminates subjected to dynamic wear. C. 1100-1400 b. 66% H 265E

An enhanced storage version of H 265.

Viapal H 445 A high reactivity, low viscosity resin for the production of pipes by centrifugal casting and offering good c. 500-710 chemical resistance and enhanced dimensional stability at elevated temperature. b. 61.5%

232

- Vianova Resins AG Viapal H 450 A high reactivity, medium viscosity resin offering high hardness, good resistance to chemicals and enhanced dimensional stability at elevated temperatures. Approved for foodstuff equipment by the Austrian Foodstuffs Act 1975. b. 66% C. 1070-1350 H 450s

A UV stabilised version of H 450.

Viaaal H 485 A high reactive, high viscosity, isophthalidNPG resin with high chemical resistance and offering high dimensional stability at elevated temperature and excellent adhesion to PVC. Approved by the Austrian C. 1100-1520 Foodstuffs Act 1975. b. 58% H 485E

An enhanced storage version of H 485.

Viapal N 600 A low reactive, medium viscosity HET acid based resin for highly transparent, self-extinguishing laminates. b. 70% C. 880-1220 Viaml N 612A A medium reactive, medium viscosity, white, self-extinguishing resin for non-transparent laminates, b. 71% c. 1000-1350 containing antimony trioxide and conforming to Class 2, BS 476 Part 7. N 612AE An enhanced storage version of N 612A.

Viaaal N 614 A medium reactivity, low viscosity HET acid based resin for self-extinguishing transparent laminates c. 250-500 produced by resin injection. b. 65% Viapal N 660 A low reactivity, low viscosity, white pigmented resin offering superior fire retardancy (Class 1, BS 476 Part 7) and low smoke development for non-transparent laminates. b. 72.5% c. 680-980 N 660E

An enhanced storage version of N 660.

Viapal VUP 4568BT A co-preaccelerated low viscosity, high reactivity, thixotropic isophthalidNPG, chemically resistant resin for hand-lay and spray/projection lamination in the manufacture of for example, swimming pools and silos. b. 53% C. 580-790 VUP 4568BET An enhanced storage version of VUP 456BT

Viaaal VUP 4570 A medium reactive, low viscosity, isophthalic resin offering enhanced strain at break, good impact strength and dimensional stability at elevated temperature, and finding application in the manufacture of pipes by centrifugal casting. b. 61% c. 450 - 580 Viaaal VUP 4610 A medium reactive, medium viscosity, general purpose orthophthalic offering enhanced impact strength. b. 66% C. 1200 1520

-

ViamI VUP 4627E A medium reactivity, low viscosity, general purpose orthophthalic resin, offering enhanced impact strength. b. 61% C. 450 - 640 VUP 4627BE A preaccelerated version of VUP 4627E. VUP 4627BET A thixotropic version of VUP 4627BE with a peroxide indication system.

b. 59.5%

C.

550-820

continued: 233

-

Databook Section 0 8 :Unsaturated Polyester Resins For Laminating 8, Associated Purposes

Vianova Resins AG - continued: VUP 4627BEMT

An LSE version of VUP 4627BET.

VUP 4627EM

An LSE version of VUP 4627E.

Viapal VUP 4640ES A medium reactive, UV stabilised, low viscosity resin containing methyl-methyacrylate and particularly formulated for the continuous manufacture of high transparent flat and corrugated sheeting. Can also be used for hand-lay at room temperature. b. 61.5% c. 440 - 670 Viapal VUP 4642E Similar to VUP 4627E, but of medium viscosity and offering a shorter processing time. C. 1180 - 1490 b. 66% Viapal VUP 4644 A very high reactive, medium viscosity, isophthalic resin with very high dimensional stability at elevated temperature and offering very good resistance to aromatic solvents. Suitable for pultrusion and press moulding. b. 60% c. 750 - 1040 Viapal VUP 4649E A high reactive, medium viscosity, isophthalic resin with enhanced dimensional stability at elevated temperature and strain to break, suitable for pipes and containers fabricated by filament winding. b. 65.5% C. 1010 - 1260 VUP 4649Emv

A low viscosity version of VUP 4649E.

Viapal VUP 4653ES A medium reactive, low viscosity, UV stabilised, transparent, fire retardant halogenated resin. Fire c. 420 610 properties can be enhanced by the addition of antimony trioxide. b. 63%

-

Viapal VUP 4657 A medium reactive, medium viscosity, isophthalic resin offering very good sea-water resistance and enhanced strain at break. b. 65% c. 960 1170

-

Viapal VUP 4665E A medium reactive, low viscosity, orthophthalic resin with very good wet-out properties and offering a low c. 240 360 peak exotherm, suitable for the injection moulding of thick-walled components. b. 58%

-

In addition to the following, the company supply a limited range of resins manufactured by both Jotun Polymer (now Reichhold) and DSM.BASF. ViscovossAzu r-Su Der An accelerated, medium reactive, low viscosity, low exotherm, environmental orthophthalic, offering reduced styrene emission, for hand-lay and spray/projection deposition. c. 500-600mPa.s Viscovoss i 25 B & i 251 B Preaccelerated, medium viscosity, isophthalic resins approved for car body production by hand-lay and spray/projection deposition. Viscovoss KF An unaccelerated, medium reactive orthophthalic with high heat resistance and good transparency. Suitable for hand-lay and spray/projection deposition. Viscovoss N 50 S An unaccelerated, low viscosity, medium reactive orthophthalic with excellent transparency and good weathering resistance, for hand-lay and spray/projection deposition. 234

- Vosschemie GmbH Viscovoss T 40 B A preaccelerated NPG/terephthalic acid resin for the construction of components affected by chemicals, high temperatures and weather conditions. Viscovoss W 37 B A preaccelerated, medium viscosity, thixotropic NPG/isophthalic suitable for hand-lay and spray/projection deposition and offering good chemical resistance and mechanical properties. viscovoss WL 5 An unaccelerated, low viscosity orthophthalic for the manufacture of translucent products. c. 250mPa.s

235

E THERMOSET RESINS FOR POLYMER CONCRETE, CULTURED MARBLE, ONYX 8t ASSOCIATED FILLED APPLICATIONS See also, "G2 - Systems for Casting, Encapsulation & Decorative Ware". Exact classification due to similarity of use is on occasion not clarified by the manufacturer. Page Alpha/Owen Coming 239 BIP Ltd 240 Blagden Manufactured Chemicals Cook Composites and Polymers 241 Cray Valley DSMoBASF Structural Resins 242 Gwil Industries Inc Huntsman Chemical Company Australia Ltd 243 lnterplastic Corporation Inc 245 Jiangyin Crabec Synthetic Chemicals Co Ltd Jotun Polymer AS (See note prior to resin descriptions) Lonza SPA 247 Marubeni Specialty Chemicals Inc 248 McWhorter Technologies Naptha Resins & Chemicals Private Ltd Neste Polyester Norpol Polymer Pte Ltd 249 PP Composites Ltd Reichhold Chemicals Inc Resinous Chemicals Ltd 251 Resisa Scott Bader Company Ltd Singapore Highpolymer Chemical Products Pte Ltd 252 Sirca SPA SIR lndustriale 253 Vianova Resins AG Vosschemie GmbH

237

- BIP Limited E

THERMOSET RESINS FOR POLYMER CONCRETE, CULTURED MARBLE, ONYX & ASSOCIATED FILLED APPLICATIONS

54-763 An accelerated, non-thixotropic, medium viscosity, fast curing, NPGIorthophthalic resin for marble applications offering excellent wet-out with inert mineral fillers. Can be employed without a gelcoat. a i 1.09

.. J i

Ib \ 65% 1 c i 11 I 11 ki

630

f

11 d f 11 mi

1 e! 11 n!

6/32.2

1f i

11 0:

Isi

II Pi

1hf

u si

ii

ri

I

80-7OPCX A Dreaccelerated, non-thixotropic, semi-rigid, DCPD polyester designed to give rapid cure and high filler loadings in the manufacture of polymer concrete castings, statuaiy figurines and imitation stonework.

84-63DM An Altek brand, accelerated, non-thixotropic, medium viscosity isophthalidNPG designed for non gelcoated products such as cultured marble and offering rapid demoulding, and excellent resistance to thermal shock.

A573 Series A Vicast brand, range of preaccelerated, non-thixotropic fast cure, casting resins for the manufacture of synthetic marble parts including vanities, tubs and panels.

Offers good filler suspension. Offers high filler acceptance. A multi-purpose version.

A573HA A573LA A573MA

A679LA Series A Vicast brand, range of preaccelerated, non-thixotropic resins for the casting of small parts such as vanities.

-

A679LA 13MI A679LA 17MI A679LA 23MI

e. 12.5125 e. 17.5125 e. 22.5125

Beetle 8137 Non-accelerated, low viscosity, high reactivity, fast curing, fully pigmentable orthophthalic resin offering resistance to mild chemical reagents, particularly suitable for resin concrete applications.

239

Databook - Section E : Thermoset Resins For Polymer Concrete, Cultured Marble, Onyx & Associated Filled Applications

81-1881 A high reactivity, low viscosity orthophthalic polyester resin for polymer concrete application.

81-1638T A preaccelerated, high reactivity orthophthalic polyester resin for mortar/grouting applications.

StVloOl 40-4901 A clear, light-coloured, UV stabilised chemical resistant NPG-isophthalic gel coat resin as used in the manufacture of all varieties of cultured marble, offering good sprayability and excellent thermal shock resistance on hot-cold water cycling. a; 1.05

.. J i

11 b f

..

50% 11 c j 245Ocps 11 d f 152 If 59 1 mj 4.7

1 ki

Ji

11

1 kj

138

11 I

75

11 mj

3.4

11 e f 11 n f

11/25 2.2% 11 o i

11 n!

4.2%

11 f f

1 oi

11 g f II Pi

38

1hf

I1 q l

u q!

Pi

11 i f

96OC

r!

11 r f

stVRO/ 40-4917 A clear, light coloured, UV stabilised acrylic modified, chemical resistant NPG-isophthalic gel coat resin, as used in the manufacture of all varieties of cultured marble, offering high clarity, good sprayability, good colour retention and excellent dimensional stability during hot-cold water cycling.

a f 1.05 _. Ji

11 b f

1 kl

11 c i 32OOcps I dj 11 el 1 I i 72 1 mi 3.9 11 ni

127

8/25 2.9% 1 o i

I1 f i

11 g f

35

II Pi

11 h f II 4:

]I i i 83OC 1r i

StvDOl 40-5711 A preaccelerated, low shrink, low exotherm, resilient resin designed for cultured marble casting applications, being particularly recommended for hot weather application, tubs, shower pans, complicated parts or wherever a more forgiving resin is desirable. Offers resistance to warping and cracking. a f 1.13

..

11 b i

71% 11 c i 33OOcps 11 di 79 11 I i 55 11 mi 4.3

11 k i

11 e j 11 nj

13/25 1 f f 1.8% 11 o f

11 gi 1I P f

42

11 hi II qi

11 i i 68OC 1r i

StvDOl 40-5722 A medium viscosity, low reactive, resilient resin specifically formulated for the manufacture of marble vanities and flat stock and offering high filler loading, good filler suspension, a low exotherm and resistance to warping and cracking.

Stvlool 40-5739 A preaccelerated, low shrink, low exotherm, resilient resin designed for cultured marble casting applications c. 235Ocps and virtually a lower viscosity variant of Stypol40-5711. b. 69% 240

- Cray Valley StvROl 405845 Identical to Stypol 40-5739 with a longer gel time. e. 20125

Stvrool 405903 A NPG-isophthalic resin containing styrene and acrylic monomers, and of excellent clarity and stain resistance, specially formulated for the production of high-grade densified marble.

Endvne 8799 A Dreaccelerated. low reactive, non-thixotropic DCPD modified polyester offering low shrinkage and exotherm, designed for the manufacture of filled castings such as showe; trays and other sanitary ware.

Endvne 8802 A preaccelerated, low reactive, non-thixotropic DCPD modified polyester offering low shrinkage and exotherm, designed for the manufacture of filled castings such as shower trays and other sanitary ware.

Norsodvne 6343.103 A preaccelerated, low reactive, non-thixotropic, resilient orthophthalic resin with a controlled rate of cure and offering good air release and resistance to cracking in the manufacture of cast components. ai .. 1:

11 b!

5842% 1 c f k ! 78 11 I !

3.5 56

11 dl

I rnf

el

3.9

11 ni

u

5-9/25 f f 2.6% 1 0 ;

n IPfsi

u iu !r ! 62OC

1 hf

I 4f

Norsodvne 6343.218LP A white pigmented, low reactive, LSE orthophthalic resin suitable for casting applications. a/

..

1 bi

5660% 1 c i 2.0-3.0dPaS 11 dj 120 1 I 70 11 rnf 4.5

1kf

11 e: 1 ni

16-20/20 1 f ! 2.5% 11 o f 212

I g i 40-45

11 p f

93

1i i

hi

1 q'i

6.8

u r!

62%

Norsodvne 6350 A preaccelerated, low reactive, non-thixotropic, orthophthalic resin accepting a high filler loading and offering controlled shrinkage and rate of cure in the casting of thick section synthetic marbles and sanitary ware. Cf .. J i

11 bi

64-66% 11 c f 8.0-1l.OdPaS 100 11 I f 65 Irnf

11 k !

1 df

4.0

1 e; 8-14/25 1 f f II st 11 n f 1.3 11 oj II Pi

u hf u qi

1i j 900~ 1r f

Norsodvne 6395402 An amine accelerated, medium reactive, non-thixotropic, isophthalic resin for the manufacture of chemical and heat resistant cements or grouts.

Norsodvne 6513 An amine accelerated, medium reactive, non-thixotropic, orthophthalic resin for the manufacture of mild chemical and heat resistant cements or grouts.

1 ai

11 b i

58-62%

11 c !

3.0-5.0dPaS

11 d j

e i 35-45/25

I 24 1

Databook - Section E : Thermoset Resins For Polymer Concrete, Cultured Marble, Onyx & Associated Filled Applications

..

Svnolite 0562-A-1 A preaccelerated, UV stabilised system for cultured marble.

Svnolite 8175-X-4 A DCPD based resin suitable for the manufacture of cultured marble.

I aj

1.12

I( b j

61.5%

11 ci

2.0-2.5dP/25

11 d f

11 e:

4/25

W-I 827128 A general purpose resin for filled applications. C. 150-18Ocps

11 f j

I

g!

11 hj

11 i j

8OoC

1

e. 17-25/21

W-I 845 A resilient resin with flex modifiers providing good impact strength for filled applications. c. 110-135cps e. 12-15/21 w-2219 Designed for use for marble or onyx, offering low colour and excellent thermal shock resistance in gelcoated e. -35-50/21 applications. c. 2900-3400 w-2221 A orthophthalic based resin for densified casting, but not recommended for sink manufacture. c. 1100-1500 e. 40-80/21 W-2225 A low colour, marble casting resin offering excellent thermal shock in gelcoated applications. c. 2900-34OOcps e. 12-20/21 W-2227 A low colour, marble casting resin offering excellent thermal shock in gelcoated applications. c. 600-9OOcps e. 15-30/21

242

- lnterplasfic Corporation W-2253 An unaccelerated isophthalidNPG based resin for densified casting, offering low colour and excellent thermal shock resistance. c. 1100-1500 e. 15-20/21 W-2255 An accelerated version of W-2253. W-2273174 Desianed for filled applications where low exotherm and medium cure is required. c. 150-2OOcps e.. '17-25/21 W-2283184 Will accept high filler loadings and provide excellent cure at a low even exotherm. C. 7 0 - 1 1 0 ~ ~e. ~ 10-15/21 W-2285186 Will accept high filler loadings and provide excellent cure at a low even exotherm. c. 150-19Ocps e. i5-2oi21 W-2297198 Designed for filled applications where low exotherm and medium cure is required. c. 180-21Ocps e. 22-28/21

Cwstic 6015 Suitable for use as a rock anchor material. i. 74OC

Silmar SIL 07BA-8966 An isophthalic offering good flexibility in the manufacture of polymer concrete. c. 130 SIL 07BA-896C

A variant of different viscosity and gel time. c. 450

e. 18/25

e. 35/25

Silmar SIL 07BA-1053

A low viscosity, room temperature BPO cure orthophthalic for polymer concrete applications. c. 250 e. 10/25 Silmar SIL 07BA-I061 A very low viscosity, fast gel and cure, DCPD orthophthalic resin for polymer concrete. c. 150

SIL 07BA-I069

Without DCPD variant. Meets SCAQMD Rule 1162. c. 120

Silmar SIL 07DA-896E An unaccelerated isophthalic offering full flexibility. c. 900

e. 8/25

e. 4/25

e. 4/25

continued: 243

Databook - Section E : Thermoset Resins For Polymer Concrete, Cultured Marble, Onyx & Associated Filled Applications lnterplastic Corporation - continued: Silmar SIL 90BA-627 A classic, premium grade accelerated marblc resin, offering low shrinkage and non-warping with good crack e. 1 8 3 2 5 resistance. Excellent for the manufacture of tubs. c. 3150 SIL 90BE-216 SIL 90BE-216s SIL 90DE-216U SIL 90844-244 SIL 90BA-627SA

A UV stabilised version of SIL 90BA-627. A summer version of SIL 90BE-216. e. 40/25 A UV stabilised but unaccelerated version of SIL 90BE-216. A low viscosity version of SIL 90BA-627 suitable for the casting of flat bar stock. c. 310 e. 18/25 A summer version of SIL 90BA-627, with a slower cure rate and enhanced crack resistance. e. 31/25

Silmar SIL 90BA-585 A classic premium grade general purpose marble casting resin offering rapid production. e. 18.5/25 c. 1265 SIL 90BAS85L SIL 90BA-965 SIL 90BA-988 SIL 90BA-1000 SIL 90BA-1OOBHV SIL 9OBA-1000S SIL 90BA-1109 SIL 90BE-8 SIL 90BA-806 SIL 90BB-859

A variant for sinks and flat stock production. c. 700 e. 21/25 A low exotherm variant to aid the use of light-weight fillers. c. 1150 e. 21/25 A room temperature BPO cure resin. c. 875 e. 20/25 A general purpose marble casting resin. c. 1275 e. 1 8 3 2 5 A high viscosity version of SIL 9QBA-1000. c. 3150 A summer version of SIL 90BA-1000. e. 40/25 Low shrinkage, low exotherm, high green strength with exceptional crack resistance, e. 222325 for the rapid production of sinks and tubs. c. 2800 A UV stabilised version of SIL 90BA-585. A general purpose variant. c. 2200 e. 18/25 A low viscosity, fast cure, variant. c. 450 e. 23/25

Silmar SIL 92BA-793C A premium onyx casting resin of very low colour. c. 1255 SIL 92BA-849 SIL 92BA-968 SIL 92BA-909

e. 27.5/25

A UV stabilised version of SIL 92BA-793C. A higher viscosity, faster gelling version of SIL 92BA-793C. c. 1950 A faster onyx resin than SIL 92BA-793C. c. 1390 e. 1 4 3 2 5

e. 21/25

Silmar SIL 93BE-956 A premium, UV stabilised, acrylic modified isophthalic/NPG solid surface casting - resin offering excellent air e. 37.325 release and suitable for sinks, bowls and flat stock. c. 550 SIL 93BE-957 SIL 93BE-1122 SIL 93BE-1122A SIL 93BE-I 122B

An acrylic modified isophthalic version of SIL 93BE-956. c. 675 e. 32.5125 Description as for SIL 93BE-956. c. 575 e. 3 7 3 2 5 A further variant. c. 575 e. 30/25 A longer gel time version of SIL 93BE-I122A, with high Barcol development. e. 49/25

Silmar SIL 94BA-854 A marble/onyx casting resin of good colour, offering excellent filler wet-out and fast gel in the production of sinks and flai stock. 1250 - e. 19/25

c.

SIL 94BA-870 SIL 94BA-870HV SIL 94BA-901 SIL 94BA-942 SIL 94BA-987A

SIL 946A-987AL 244

A slower curing variant of SIL 94BA-854. A higher viscosity variant of SIL 94BA-870. c. 1265 A lower shrinkage, low exotherm, high elongation resin offering excellent thermal shock resistance. c. 1550 e. 28/25 Particularly suited for use with continuous matrix dispensing machines. A premium low colour resin with a promotion system that allows a wide choice of e. 28/25 catalyst, which maintaining the low colour. c. 1700 A lower viscosity version of SIL 94BA-987A. c. 1300

- Jotun Polymer AS SIL 94BA-987M SIL 94BA-987MH SIL 9466-987s SIL 94BA-990 SIL 94BA-993 SIL 94BA-993M

A further low colour version. c. 1250 e. 40/25 A high viscosity version of SIL 94BA-987M. c. 1900 A summer version of SIL 94BA-987M. c. 1250 e. 53/25 A very low colour, Ibnger gel time summer version of SIL 94BA-987M. c. 1900 e. 26/25 A low colour marblelonyx casting resin. c. 1500 e. 28.5125 A longer gel time, summer version of SIL 94BA-993.

-

Fuli 85 Artware Resin

[I b f

a! .. 1i

0.15%

61-67% 1 c i 0.28-0.52 I[ k! 80 11 I i

[[ d ! 16-24 1 e! 5-11/25

11 mi

I ni

2%

1f I 11 o i

I[ gi

u P!

40

hi

II q!

1 i i 60°C 11 r i

-

Fuli 86 Artware Resin

Shortly before going to press, the company was acquired by Reichhold Chemicals Inc. Changes to Jotun manufacturing units, name, distrbution or other arrangements, and with regard to possible alterations in the respective resins supplied, have not been advised. Noraol 320-000 Medium reactive orthophthalidNPG base resin system, suitable for non-reinforced applications like handmade polyester concrete.

320-108 :

An unaccelerated, UV stabilised orthophthalidNPG chemically resistant resin having, compared to 320-000, a typical gel time (e) of 45-55/23. Recommended for solid surface applications.

320-508 :

A preaccelerated, UV stabilised, chemically resistant orthophthalidNPG resin offering good curing properties but compared to 320-000, with a typical gel time (e) of 10-14/23. Recommended for solid surface applications.

Norrool 360-100 An unaccelerateed, orthophthalic base resin for general purpose cultured marble applications.

continued: 245

Databook - Section E : Thermoset Resins For Polymer Concrete, Cultured Marble, Onyx & Associated Filled Applications Jotun Polymer AS - continued: Norpol 414-000 Medium reactive orthophthalic base resin specially formulated for polyester concrete applications.

414-040 :

Unaccelerated substantially as above - see differences which follow polyester concrete applications. c 200-250 e 7-8/23

-

for general purpose,

Norpol 415-000 Unaccelerated medium reactive orthophthalic base resin with good resilience, especially formulated for polyester concrete applications.

There are six other resins as below, concrete/cultured marble applications.

within the 415 series, specially formulated for polyester

415-015 :

Unaccelerated, orthophthalic containing amine for fast curing. e 3-5/23 n 5.0%

415-041 :

Unaccelerated, orthophthalic, general purpose grade. typical gel time (e) of 10-15/23.

415-MI00 :

Unaccelerated, LSE orthophthalic containing internal release agent. Properties as for 415015 other than typical gel time (e) of 25-35/23.

415-514 :

Preaccelerated, medium reactivity orthophthalic having substantially similar properties to 415M100.

415-515 :

Similar to 41 5-514 but offering faster demoulding times.

415-M518 :

Preaccelerated, medium reactivity, UV-stabilised, LSE orthophthalic exhibiting a typical gel time (e) of 10-15/23.

Properties as for 415-015 other than

Noraol 440-099 An unaccelerated medium reactive, general purpose, orthophthalic resin suitable for cultured marble. A higher viscosity version of 440-33 (see Section D8)

440-501 :

Preaccelerated, medium-to-low reactivity, UV-stabilised system with a typical gel time (e) of 8-15/23.

440-M515 :

Substantially an LSE, UV-stabilised version of 440-099.

.. Ii

246

11 k f

110

1I

f

60

11 rnj

1 nj

1.7%

11 o f

Pi

9i

1r f

- Marubeni Specialty Chemicals lnc NOrRol 450-500 A low reactive, low colour, preaccelerated orthophthalic resin for the manufacture of non-filled castings or encapsulation. Especially good for artificial onyx applications. aj

j

1 bf

66%

11 c j

800-950

i 0.8%/28 ]I k j 120 1 I j

65

1 dj 529 11 et 10-16/23 11 f j 1 rnt 3.8 11 ni 2.0% 11 oi

I si Pt

11 hi

n qi

1if

]I

55%

ri

Nomol 451-000 A low exotherm orthophthalic base resin, especially developed for filled castings. a! . :

1 b; 65% I c i 500-600 Idi 25 I e: 6-8/23 11 f i 11 k j 110 1 I i 60 11 mf 4.0 11 n j 1.7% 1 oj

II si Pi

hi

n qi

1i

550~

1r j

A preaccelerated, low reactivity orthophthalic resin for the manufacture of filled castings and figurines. e 10-15/23

451-510 :

Distitron 2lSB W5 An unaccelerated, low styrene content resin offering good filler wettability, specifically designed for the hot casting of polymer marble slabs.

Distitron 417 DW2O An unaccelerated orthophthalic resin offering good filler wettability for the cold casting of polymer marble slabs.

Distitron 458 W4 An unaccelerated orthophthalic resin offering good mechnical properties and transparency, for the manufacture by casting of polymer concrete.

Distitron 619A A special resin offering very good colour ageing resistance for the manufacture by casting of polymer marble.

I ai

11 b i

67%

11 c i

1600

11 di

et

11 f f

II si

1 hi

1i i

I

IOOOC

Distitron 3559 SW3 A preaccelerated orthophthalic resin with good filler compatibility for the manufacture of synthetic concrete by casting techniques.

I ai

]I

b i 61%

11 C !

300

11 dj

1 ei

]I

fi

I si

1 h!

1i !

I

IIOOC

Polvmar PCM 202 8, PCM 204 Rigid, low reactive, high viscosity orthophthalic resins specifically designed for cultured marble application. n 1.4% The only quoted data is: e 26-32

continued: 247

Databook - Section E : Thermoset Resins For Polymer Concrete, Cultured Marble, Onyx & Associated Filled Applications

Marubeni Specialty Chemicals Inc - continued:

Polvmar PCM 402 & PCM 404 Preaccelerated, low reactivity, high viscosity resins for the manufacture of cultured marble and onyx. The only quoted data is: e 30-34 n 1.1% Polvmar PMI 90 A medium reactive, low shrinkage, isophthalidNPG casting resin for the production of clear and filled items such as cultured marble, onyx, sanitary ware, baths, tiles and building panels.

I a f 1.12-1.16 1 b ] 71-73% 1 c j

1 dj

16-20

1 ej

15-20/25

I

748-3645 A preaccelerated, premium NPG/isophthalic clear casting resin, and suitable for the manufacture of cultured marble and onyx. Good thermal shock resistance and colour retention. 11 gi 45-50 11 hi 11 i i 1100 a i 1.1 11 b i 65-69% c i 1600-2200 11 d ! 11 e ; 17-19/23 11 f i .. 11 k ! 121 1 I j 54 ]I m 3.9 I] n j 1.9% 1 o i 1: II PI II qi 11 r i

u

Polvflex GR 200-09 A moderate viscosity unaccelerated orthophthalic resin specially formulated for cultured marble applications with good wettability and low shrinkage and exotherm to reduce the incidence of thermal cracking.

G 103E A preaccelerated, medium viscosity orthophthalic for the manufacture of polymer concrete and marble.

ai j

11

b f 62% 1 c ] 18mg/24 11 k ] 100 11 I j

500 55

11 rni

df 4.2

1 e ] 5/23 1 f I 11 nj 1.8% 1 o i

I pi II Pi

1 hf

II qi

S 280E A preaccelerated, low styrene content, orthophthalic resin for polymer concrete and marble.

S 380 An unaccelerated, high reactive, orthophthalic resin for polymer concrete and marble.

248

1i j 11 r i

7OoC

- Reichhold Chemicals Inc

Dvnopol 2938 A preaccelerated, non-thixotropic orthophthalic resin, slightly pink in colour, suitable for the manufacture of filled castings. e. 20 - 25/23 i. 63OC n. 1.6%

2938A A lower viscosity version of 2938.

The company also import other casting resins from Jotun Polymer (now Reichhold). Please see the appropriate section for resin description. Other grades can be made available depending on demand. 415-000

440-033J

440-099A

Silmar S465 An orthophthalic flexible resin for plaques and allied components. a. 1. I 2

c. 4OOcps.

e. 5-7/25

Silmar S793C A synthetic unaccelerated onyx resin designed to produce clear, translucent castings for baths, sinks and flatstock.

S849

A UV stabilised version of S793C.

Silmar S-957 An isophthalic polyester for non-gelcoated densified products with excellent stain resistance and mechanical properties.

Polvlite 32109-10 An orthophthalic resin designed for the fabrication of small castings and vanities as required by the cultured marble and sanitary ware industries. c. 900-1100 e. 7-13/25 Polvljte 32124-05 & 32124-12 Preaccelerated orthophthalic casting resins for room temperature cure with MEKP, suitable for large and small vanities and tubs as required by the cultured marble and sanitary ware industries. c. 05 = 1900-2100; 12 = 1600-1800 e. 05 = 16-20/25: 12 = 12-14/25 Polvlite 32132-00 A rigid, low reacitivity, low viscosity orthophthalic casting resin recommended for vanities and difficult to mould parts. c. 900-1300 e. 8-12/25 Polvlite 32135-00 An orthophthalic polyester designed for the casting of large cultured marble components such as bath tubs. c. 2600-3000 e. 9-13/25

continued: 249

Databook - Section E : Thermoset Resins For Polymer Concrete, Cultured Marble, Onyx & Associated Filled Applications

Reichhold Chemicals Inc - continued: Polvlite 32136-00 An orthophthalic casting resin for cultured marble. No other details or description given. Polvlite Procast 32144-02 & 32144-07 (“West Coast” version) Orthophthalic casting resins, versatile enough to make small castings as well as vanities and large tubs, offering superior cast cultured marble that is stronger and tougher than is usual with orthophthalics. Designed for what is known as ‘west coast USA’ use. c. 02 = 1100-1500;07 = 900-1300 e. 8-12/25 Polvlite Procast 32144-25 & 32144-30 (“East Coast“ version) As for 32144-02and 32144-07but of different reactivity, (Le. designed for what is known as ‘east coast USA’ use). c. 25 = 1800-2200;30 = 900-1300 e. 25 = 13-18/25;30 = 8-12/25 Polvlite Procast 32145-24 & 32145-25

Orthophthalic casting resins designed for the manufacture of cultured marble, onyx or granite and versatile for both small and large items. c. 24 = 900-1500;25 = 1900-2400 e. 24 = 11-15/25;25 = 15-19/25 Polvlite 32153-00 A specially formulated orthophthalic for cultured onyx and granite with the finest translucent water-white colour. e. 25-35/25 Polvlite 32166-15 & 32166-20

Preaccelerated, UV stabilised orthophthalics for the casting of stain-resistant sanitary ware, curing at room temperature. The ‘work-horse’ solid surface resin. c. 15 = 850-1250; 20 = 900-1200 e. 15 = 1 1 -1 5/25; 20 = 15-18/25 Polvlite 32169-00& 32169-1 0 Another ‘work-horse’ solid surface resin based on isophthalic acid and NPG, UV stabilised and stain resistant e. 18-21/25 and preacceleratedto cure at room temperature with MEKP. c. 900-1200 Polvlite 32356-00 An orthophthalic for the manufacture of flexible furniture and sanitary ware ‘trims’, readily filled and can be secured in position by nailing, whether filled or unfilled. c. 250-300 e. 2-5/25 Polvlite 32357-00 An orthophthalic for general purpose use in the manufacture of simulated wood, and in statuettes, carvings and plaques. c. 200-250 e. 3-6/25 Polvlite 32358-00 An orthophthalic for use in non-cored furniture and associated castings that require moderate load-bearing strength properties with dimensional stability, such as mirror frames, headboards, doors and lamp bases. c. 275-325 e. 4-8/25 Polvlite 32480-00 A resilient orthophthalic formulated for use in the manufacture of polymer concrete. c. 140-180 e. 3-6/25 Polvlite 32737 A clear, orthophthalic finishing resin.

250

c. 375-450

e. 12-15/25

- Scott Bader Company Limifed

Wresipol 31444 A preaccelerated, medium reactive, casting resin for high mixed filler loadings and offering fast gel and cure.

Wresirool 31450 A preaccelerated good curing resin for use in the casting of marble and onyx ware.

I a/

11 b i

11 c !

0.45Pa.s

11 d f

1 e:

I

18/25

Wresipol 31465 A Dreaccelerated, low viscosity specifically formulated resin offering fast gel and gel as well as high filler loadings in the casting of sanitary ware and similar items.

I aj

11 bj

aj

11 b j

11 c j

62-65%

1 C:

1 dj

O.16Pa.s

300-400

11 e f

]

12/25

11 d j

Resipol 9016 An unaccelerated orthophthalic resin for the manufacture of artificial marble by the Breton process. ai .. Ji

11 bi

6568% 11 c j 365-475 96 11 I i 51

1df 1 mi

3.7

1 e! 11 nj

6649% 11 c f 600-700 96 I] I f 51

11 d f 11 m

3.7

11 e f 15-19/25 11 f f 1 n i 2.3% o f

11 k !

7/25 11 f j 2.3% u o j

u PI

I st

11 hi

i

i

550~ ri

u 9.;

1 hj

1 ii

550~

u qi

Resipol 9026 ai ..

11 b j

11 k i

I

Pi

n q!

Ir !

Resipol 9041 An unaccelerated low viscosity orthophthalic resin offering good wet-out properties in the manufacture of af .. J i

11 b j

5548% 1 C; 130-160 96 11 I i 54

1 kf

11 d /

u rni

3.9

11 ej 11 n j

7-9/25 11 f f 1.7% oi

u sj

II Pi

11 h f II qi

i

1

8OoC

11 r i

Resbol 9050 An unaccelerated UV stabilised orthophthalic offering good filler wet-out properties in the manufacture of polymer concrete.

I ai

11 b i

59-62%

11 ct

170-210

11 di

11 e!

3/25

I

Crvstic 471 PALV A preaccelerated, low viscosity, rapid hardening, rapid wet-out, thixotropic orthophthalic, suitable for resin concrete applications.

251

Databook - Section E : Thermoset Resins For Polymer Concrete, Cultured Marble, Onyx & Associated Filled Applications

2719 An unaccelerated, clear, low viscosity, readily pigmented, rapid-cure orthophthalic with a wax addition, designed for the manufacture of artificial marble and onyx for such applications as vanitory units, table tops, and flooring. c. 4 - 5 e. 8 - 10/30

HPR CHI0 A low viscosity, low reactive orthophthalic suitable for the manufacture of polymer concrete and allied cast com ponents.

HPR C121 A low viscosity, low reactive orthophthalic for the manufacture of polymer concrete and allied cast components.

HPR C124 D A medium reactive, low viscosity, UV stabilised orthophthalic resin particularly suitable for the manufacture of polymer concrete castings.

Sirester FS 0836lARE A preaccelerated, low viscosity, medium reactive, orthophthalic.

Sirester FS 0898 An unaccelerated, low reactivity, short gel time, orthophthalic.

Sirester FS 1236 A preaccelerated orthophthalic resin similar to FS 9900, but with a self-release characteristic.

Sirester FS 9900 An unaccelerated, low reactivity, low shrinkage orthophthalic suitable for castings with or without mineral filler.

252

- Vosschemie GmbH

Viapal H 270B A co-preaccelerated medium reactive, high viscosity orthophthalic designed for cast marble and sanitary ware. b. 69% c. 2400-2900 H 2706E An enhanced storage version of H 2708. Viapal H 271 A high reactivity, medium viscosity orthophthalic for the continuous production of cast marble on a polymer concrete extruder. b. 62.5% c. 660-920 H 2716

A co-preaccelerated, medium reactive, medium viscosity version of H 271 for cast marble production. b. 64% c. 940-1220

Viaroal H 452 A high reactivity, low viscosity resin for polymer concrete and offering good resistance to chemicals and enhanced dimensional stability at elevated temperature. b. 60% c. 300-490 Viaroal VUP 4533E A medium reactive and medium viscosity resin offering enhanced storage life for the industrial production of agglo-marble blocks, by in particular, the "Breton" system. b. 62% c. 480 670

-

Viaroal VUP 4626BE A preaccelerated, practically colourless, low reactivity, high viscosity orthophthalic resin which cures with a low exotherm and is particularly suitable for thick-walled sanitary ware with a marble or onyx effect. b. 68% C. 1820 - 2170

Roskvdal K 2 7 An amine accelerated, high viscosity orthophthalic with a short potlife but good storage stability, suitable for for use as a casting compound. c. 2700 - 3100 mPa.s

253

FORMULATED SURFACING PASTES PUTTIES 8t FILLERS (Thermoset resins for the manufacture of putty & filler paste manufacture - see G5)

Adtech Corporation Akemi Inc Ciba Specialty Chemicals Cook Composites and Polymers Ferro (Holland) B V Hawkeye Industries Inc Hawk International Distributors Ltd Lilly Industries Inc Llewellyn Ryland Ltd Polydyne Inc Resin Services Inc Scott Bader Company Ltd SP Systems Ltd Vosschemie GmbH

Page 257

258 259

260 261

262

255

- Akemi Inc F

FORMULATED SURFACING PASTES, PUTTIES & FILLERS

N.B. The following is a selection of the company's large range of high performance polyester filler pastes. No. 10 GEL COAT MOULD REPAIR FILLER A smooth, thixotropic pglyester based filler for fast and easy repair of production moulds. Withstands curing exotherms. No. 14 ULTRA FILLER A smooth, creamy thixotropic paste of the highest quality offering excellent strength and rigidity. Meets ' Boeing Specs. MMS 101 Code MDJlJ3808 Code P1. No. 15 MICRO ULTRA FILLER (Flame Retardant) A lightweight filler that meets or exceeds stringent aircraftlaerospace "no burn" requirements. Meets FAR 25.853 and Boeing Spec. BMS-5-136A. No. 31 BOAT & BONDING PUTTY A creamy, thixotropic, polyester based trowelable system generating low exotherm on cure. No. 32 BOAT PUTTY A dual promoted highly thixotropic polyester system, having excellent handling qualities. No. 36 UNIVERSAL PATTERN 8 MODEL FILLER An easily carvable polyester based filler that resists chipping and cracking. No. 38 BOAT BONDING PUTTY A grey, polyester based thixotropic bonding putty.

No. 39 RADIUS PUTTY A brushable or trowleable, low exotherm, thixotropic polyester filler specially formulated for marine use.

APF 1 (Formerly901) An impact resistant filler paste.

APF 3 A lightweight, carvable filler paste.

APF 4 A low shrink filler paste of excellent machinability and sandability.

APF 5 A hardset filler paste of excellent machinability and good sandability.

continued: 257

-

Databook Section F :Formulated Surfacing Pastes, Putties & Fillers

-

Akemi Inc continued: APF 6 A double promoted, high gloss and styrene free filler paste.

I af

1.36

1bf

11 ci

11 d f

1 ef

60-90/25

11 f f

I gf

11 hj

11 i f

204OC

I

11 d f

1 ef

12-15/25

1f f

u si

11 h f

1i f

204OC

1

]I

11 e f

12-15/25

1f i

I g/

hf

11 i f

85OC

I

11 h f

1i f

204OC

I

APF 7 A styrene free filler paste.

I af

1.70

1 b;

cf

APF 8 (Formerly908) A carvable filler paste.

I af

1.04

11 c f

1 bf

df

APF 9 (Formerly909) A carvable filler paste.

APF 1700 A double promoted, high build, sprayable filler paste.

I a/

1.40 1 b f

11 c /

2000-3000/25

11 d f

11 e f

60-90/25

1ff

I gf

Araldite 252 A two component, room temperature curing epoxy filler paste used mainly as a potting compound and for the edge filling of honeycomb sandwich structures. Araldite 255 A flame retardant two component, low density epoxy filler paste for room temperature cure and specially formulated for use as an edge filler in honeycomb sandwich constructions where the fire properties of the filled panel edges may affect the fire retardancy rating of the component.

Polvcor 970 Series Easv Flow Polvester Bondina Puttvl Easy Flow 970-B-705 and 970-X-722 putties are unique in that, uncatalysed, they are flowable liquids, a property that allows easy transfer and more assured catalyst dispersion. After the catalyst is mixed in, the liquid is transformed into a putty by the addition of 0.5% water. The lighter weight 970-X-722 putty contains a catalyst colour indicator.

258

- Hawk International Distributors Limited

GRADE

I

APPLlCATlONlDESCRlPTlON

COLOlJR

Base for obtaining colour putties by adding 5-10% pigment paste, or blended I: 1 with colour gelcoat Marine and industrial parts, vehicle bodywork and construction panels.

Natural

DENSITY

Natural

1.28

CATALYST

CURE TIME

1%PMEK

30-40 minutes at 25OC

IWPMEK

30-40 minutes at 25OC

Durafec Hi-Gloss Puttv Available unpigmented (804-OOl), tooling black (802-001) and tooling orange (808-001)’ these easily sandable putties are high quality catalysed pastes designed to provide a strong repair material for FRP mould tools and components.

Durabuild Hi-Gloss Puttv An untinted, easily sandable high quality thixotropic putty pastes designed to provide a strong repair material for FRP mould tools and components.

[

ai

1.32

11 b!

11 c :

]I

dj

1 e:

20-30/25

]

Durabuild Rapid HHR Putty A fast-set, smooth workable paste system for use in composite aerospace, aircraft, automotive and general GRP tooling, and final fabrication where potential exposure to elevated temperatures up to 23OOC has to be tolerated for short-term or continuous periods. Has excellent adhesion and bond strength to GRP, SMC, BMC, RIM, epoxy, graphite and ‘Kevlar’ as well as aluminium, plaster and other substrates.

259

-

Databook Section F :Formulated Surfacing Pastes, Putties & Fillers

4896 Bondina Puttv A high performance, light-weight bonding putty, with a low exotherm and long-term moisture resistance. Having excellent bonding and shear strength and a high thixotropic index there is excellent adherence to verticaI surafces.

1 ai

1.06

1 b;

1 c;

1 d;

I] e!

30-35/25

I

7400 Bondina Puttv A high performance, light-weight bonding putty with very good anti-sag properties with excellent bonding a shear strength.

I

a! 1.02-1.06

11 b f

11 ci

1 di

11 e;

25-30/25

]

HVD 02 A preaccelerated, general purpose highly thixotropic MEKP cured bonding paste pigmented dark blue.

I

a i 1.25

11 bl

I]

11 c i

di

I] e!

13/25

]

HVD 03 A brush or knife applied preaccelerated MEKP cured backing paste, for use after the gelcoat and before the laminate. HVD 04 A low density, quick curing filler paste specifically designed for filling the gaps on the edges of garage doors.

[

a i 0.665

11 bi

HVD 05 A preaccelerated, grey.

I a!

0.85

11 b!

1 ci

100-6OOp

1d (

1 e;

<30/25

I

low density, general purpose, highly thixotropic MEKP cured gap filler, pigmented blue

11 c i

Idi

11 ej

25/25

I

HVD 06 A preaccelerated, fast curing, general purpose, MEKP cured structural bonding paste, pigmented dark blue.

I a!

1.25

1 b;

(1 c ;

1 di

11 e!

4/25

I

HVD 07 A preaccelerated, low viscosity, general purpose, highly thixotropic MEKP cured gap filler, pigmented greylgreen.

I ai

0.85

1 b;

11 d f

11 ci

11 e:

12/25

I

HVD 08 A preaccelerated, general purpose highly thixotropic structural bonding paste based on NPG, offering improved chemical resistance, superior properties and cured with either MEKP or DBP. a: 1.46

bj

Ci

d!

e! 7/25(DBP) j 140/25(MEKP)

HVD 09 A preaccelerated, flexible highly thixotropic, structural bonding paste cured with either MEKP or DBP. aj

1.3

bj

Cl

dj

e; 15/25(MEKP) j 15/25(DBP)

- SP Sysfems Limited

125-0009 POIVPutty A linht-weight MEKP cured filler paste, with additional uses as an adhesive for bedding PVC foam, balsa wood or other stringers or strengthening members.

ECA-PASTE A strong, tough, high-impact, two component epoxy paste offering good workability for bonding honeycomb and fot the patching of tools. EPRSM RESIN A two component epoxy paste for potting, bonding and other applications. PATCH AID GRAY A hard quick-setting polyester paste for tooling repair, fabrication, engineering prototypes, patterns and models. PATCH AID WHITE A hard quick-setting polyester paste for tooling repair, fabrication, engineering prototypes, patterns and models. RESIN SHAPE An all-purpose carvable thixotropic epoxy filler paste offering outstanding adhesion, dimensional stability and low water absorption. RSC-301x6 A fast room temperature cure, two component, epoxy patching paste.

Cwsfic Bondina Paste 77PA A thixotropic, preaccelerated, isophthalic gap filler and bonding paste, GRP to GRP, or GRP to other substrates. e. 8/20 Crvsfic Bondina Paste 78PA A thixotropic, preaccelerated, orthophthalic gap filler and bonding paste, GRP to GRP, GRP to wood or GRP to steel. e. 12/20 Cwsfic Bondina Paste 79PA A thixotropic, preaccelerated, orthophthalic gap filler and bonding paste, GRP to GRP, GRP to wood or GRP to steel. e. 7/20

SP S’Fi// 400 A light-weight, solvent free, two part epoxy filler suitable for metals, GRP and composites generally, wood and concrete. Smooth application and easy sanding qualities make the material ideal for any building or repair application which requires a non-shrink, water-resistant, highly adhesive epoxy filler.

26 1

-

Databook Section F :Formulated Surfacing Pastes, Putties & Fillers

Model Filler A reddish brown, high viscosity filler for making, contouring and repairing models and patterns.

Viscovoss KL 1 A cobalt accelerated, orthophthalic, filled paste for bonding, repair and filling.

262

G THERMOSET RESIN SYSTEMS FOR : Page

GI

ADHESIVE MANUFACTURE BIP Ltd DSMOBASFStructrural Resins Jotun Polymer AS (See note prior to resin descriptions) Resisa Vianova Kunsthatz AG

G2

267 268

CASTING, ENCAPSULATION & DECORATIVE ITEMS

-

(See also, "E Polymer Concrete, Cultured Marble, Onyx & Associated Filled Applications". Exact classification due to similarity of use, is on occasion not clarified by the manufacturer.) Adtech Corporation BIP Ltd Blagden Manufactured Chemicals Huntsman Chemical Company Australia Ltd lnterplastic Corporation Jotun Polymer AS (See note prior to resin descriptions) Lonza SPA Marubeni Specialty Chemicals Inc Neste Polyester PP Composites Ltd Reichhold Chemicals Inc Resinous Chemicals Ltd Resin Services Inc Resisa Robnor Resins Singapore Highpolymer Chemical Products Pte Ltd Tool Chemical Company Inc Vianova Resins AG Vosschemie GmbH

G3

269

270 271 272

273

274

GELCOAT MANUFACTURE Ashland Chemical Hispania BIP Ltd DSMoBASF Structural Resins Huntsman Chemical Company Australia Ltd lnterplastic Corporation Resisa Sirca SPA

275

276

See over for G4 to G8

263

G4

PIGMENT PASTE MANUFACTURE & ASSOCIATED Ashland Chemical Hispania BIP Limited lnterplastic Corporation John Polymer AS (See note prior to resin descriptions) Resinous Chemicals Limited Sirca SPA SIR Industriale

G5

280

281

282

283 284 285 286 287 288 289 290 291

TOOLING LAMINATE RESINS Adtech Corporation Alpha/Owens Corning Borden Chemical UK Ltd Bryte Technologies Inc Cook Composites and PolymeFs Fibercote Industries Inc Gwil Industries Inc Huntsman Chemical Company Australia Ltd Interplastic Corporation Jotun Polymer AS

264

279

MOULDING COMPOUND MANUFACTURE Alpha/Owens Corning Ashland Chemical Company BIP Limited Blagden ManufacturedChemicals Cray Valley Georgia-Pacific Resins Inc Huntsman Chemical Company Australia Ltd lnterplastic Corporation Jiangyin Crabec Synthetic Chemicals Co Ltd Jotun Polymer AS Lonza SPA Naptha Resins & Chemicals Private Ltd Neste Polyester Resisa Scott Bader Company Ltd SIR Industriale Swancor Ind. Company Ltd Vianova Resins AG

e7

278

PUTTY & FILLER PASTE MANUFACTURE Blagden Manufactured Chemicals BIP Ltd Cray Valley DSMoBASF Structural Resins Huntsman Chemical Company Australia Ltd lnterplastic Corporation Jiangyin Crabec Synthetic Chemicals Co Ltd Jotun Polymer AS (See note prior to resin descriptions) Naptha Resins & Chemicals Private Ltd Resinous Chemicals Ltd Resisa Sirca SPA SP Systems Ltd Vianova Resins AG

G6

Page 277

292

293

Reichhold Chemicals Inc Resin Services Inc Tool Chemical Co Inc Vianova Resins AG

G8

Page 294 295

OTHERWISE UNCLASSIFIED OR FOR UNCLASSIFIED USE Blagden Manufactured Chemicals Bryte Technologies Inc Ciba Specialty Chemicals DSMoBASF Structural Resins FiberCote Industries Inc Futura Coatings Inc Hawkeye Industries Inc lnterplastic Corporation Reichhold Chemicals Inc Resisa SP Systems Ltd Swancor Ind. Company Ltd Vianova Resins AG

296 297

298 299

265

- DSM&ASF GI

Structural Resins

THERMOSET RESINS FOR ADHESIVE MANUFACTURE

8937

A highly flexible, non-accelerated, low viscosity orthophthalic resin allowing a high filler loading, high resistance to freeze/thaw cycling, rapid gel-time and cure rate, specially formulated for the jointing of earthenware pipes.

I ai

1.01

11 b i

65%

1 ci

1.6p/25 d i

25

11 ei

11 f j

u si

hi 3.3%

11 i i

Palatal A410 An unaccelerated, medium reactive, NPG/isophthalic offering chemical resistance and suitable for adhesive manufacture.

A410N An inhibited version for tropical application. A410U A LSE version.

Palatal E200 An unaccelerated, flexible, low reactive, novolak adiptic acid based resin for adhesives.

Palatal E240 An unaccelerated, low reactive, orthophthalic resin as an adhesive in the manufacture of artificial wood.

Palatal E250 An unaccelerated, low reactive, flexible orthophthalic resin for use in adhesives.

ai ..

li

11 b i 11 ki

70% 60

11 C ! 11 I !

55

11 di 14

u ni 4.4-12% u11 of ii

11 ei 2.15

I si. Pi

1 h!

I si

11 i i 11 r i

1

Palatal K750V A preaccelerated, non-thixotropic, medium reactive orthophthalic resin suitable for automotive adhesive application. a. .j

1 bj 66% 1 c j 525 11 di 11 kj I[ I i 12 11 mi

11 ei

i n:

i f ]

45%

1 o!

u si.Pi

1 hi

n si

uii

1r j

Palatal K761V A preaccelerated, non-thixotropic, high reactive, isophthalic resin suitable for automotive adhesive application. a. i. Ji

11 b i 1 kj

63% 95

11 c i 1Ij

400 60

11 d! 11 m j

2.8

11 e! 11 n i

Ufi

3.9-10% 1 0 :

II si

Pi

1 hi

u 41

u i i

11 r !

continued: 267

-

Databook Section G7 : Thermoset Resins For Adhesive Manufacture

-

DSMmBASF Structural Resins continued:

..

..

li

Pi

qi

11 r i

I Pi

II q!

11 r i

Svnolite 6494-U-1 A base resin for the manufacture of filled adhesives.

Shortly before going t o press, the company was acquired by Reichhold Chemicals Inc. Changes to Jotun manufacturing units, name, distrbution or other arrangements, and with regard t o possible alterations in the respective resins supplied, have not been advised. Nomoi 250-000 A medium reactive, high molecular weight isophthalidNPG base resin showing very good chemical resistance, and offering good adhesion to rigid PVC.

ResiRol 9995

An unaccelerated, specially formulated resin offering good adhesion to PVC.

Viapal H 220B An amine preaccelerated, medium reactive, medium viscosity orthophtahlic resin. b. 65%

268

c. 880-1120.

- Huntsman Chemical Company Australia Limited G2

THERMOSET RESINS FOR CASTING, ENCAPSULATION & DECORATIVE ITEMS ~

N.B Typically non-filled applications, otherwise see Section E.

No. 40 LIGHTWEIGHT POLYESTER CASTING RESIN A low exotherm system for filling voids and casting small parts or moulds.

84-4126 A preaccelerated, low viscosity isophthalic resin for electrical equipment potting.

Beetle 8930 Modified orthophthalic, pre-accelerated, non-thixotropic, low viscosity resin, for casting ai j

i

1.10 11 b f 60% I] c j 3.3~125 1 df 17 1 e! 5/25 16mg/24 11 k j 108 11 I ; 51 11 m; 3.8 11 ni 3.0%

1f f 11 o f

1 gj

u PI

Ih!

45

Estarez 495 P A medium cure, low viscosity, orthophthalic casting resin.

e. 13/25

i. 6OoC

fsfarez 571 P A medium cure, low viscosity, orthophthalic casting resin.

e. 13/25

i. 6OoC

Esfarez 905 P A fast cure, medium viscosity, orthophthalic casting resin.

e. 9/25

i. 6OoC

Esfarez 906 P A medium cure, medium viscosity, orthophthalic casting resin. fstarez 3110 P A fast cure, low viscosity, orthophthalic casting resin.

e. 7/25

fsfarez 3112 P A medium cure, low viscosity, orthophthalic casting resin.

e. 18/25

7%

II qi

11 i I

54OC

ri

i. 6OoC

i. 6OoC

e. 18/25

i. 6OoC

Esfarez 3130 PA A fast cure, medium viscosity, preaccelerated orthophthalic casting resin, containing wax. e. 6/25 i. 6OoC Esfarez 3495 P A fast cure, low viscosity, orthophthalic casting resin, without wax.

e. 8/25

i. 6OoC 209

Databook - Section G2 : Thermoset Resins For Casting, Encapsulation & Decorative Items

Silmar SIL 95BA-40 A premier water clear rigid resin for giftware, hobby and craft use. c. 450

e. 16/25

Silmar SIL 95BA-41 A water clear, rigid accelerated resin for large mass castings with a long gel time, a low exotherm and low shrinkage. c. 450 16/25 SIL 95DA-41U

An unpromoted version of SIL 95BA-41. c. 475

e. 4/25

Silmar SIL 95BA-42 A clear rigid, casting resin of low colour, offering a fast gel time and suitable for filling. c. 450 SIL 95BA-42S

e. 6/25

A summer variant of SIL 95BA-42.

Silmar SIL 95BA-68L2 A low viscosity, water clear, tough and resilient rigid casting resin, very suitable for the manufacture of welding helmet lens. c. 180 e. 15/25 Silmar SIL 95BA-858 A semi-rigid, low viscosity, clear, tough, resilient resin suitable for high filler loading and for use in rotational e. 10/25 moulding. c. 55 Silmar SIL 95BA-897 A semi-rigid, fast cure resin offering high filler loading. c. 55

e. 7/25

Silmar SIL 95BB-969 A semi-rigid high elongation resin for filled castings. c. 1350

e. 12/25

SIL 95BE-981

A lower viscosity version of SIL 9566-969. c. 625

e. 11/25

Silmar SIL 95DA-4A An unaccelerated, rigid resin. c. 1500 Silmar SIL 95DA-979 An unaccelerated, rigid orthophthalidNPG with internal mould release system and suitable for the manufacture of weldingshield lens. c. 180 e. 3.5/25 Silmar SIL 96BA-962 A rigid, dark colour resin offering very fast cure and gel for rotational casting. c. 325

e. 3/25

Shortly before going to press, the company was acquired by Reichhold Chemicals Inc. Changes to Jotun manufacturing units, name, distrbution or other arrangements, and with regard to possible alterations in the respective resins supplied, have not been advised. NOrROI 340-000 Water clear, medium reactive, orthophthalic base resin for medium sized non-filled castings.

340-500 :

270

A preaccelerated, low reactivity, water clear orthophthalic resin giving excellent colour for non-filled castings and encapsulation. e 32-38/23

- Marubeni Speciaity Chemicals Inc Norrool 341-000 Water clear, orthophthalic base resin of low reactivity suitable for larger castings.

An unaccelerated water clear, orthophthalic resin for the casting of larger moulds compared to 340-500. e 25-35/23

341-020 :

Norm?/ 342-000 Low exotherm orthophthalic base resin of reduced shrinkage and low viscosity for figurine castings.

11 bi 66% ci 500-600 1 dj e20 11 e : 10-20/23 11 f f 11 k i 90 11 I i 50 I mi 3.0 In l 2% Io f

ai

..

342610 :

II si. Pi

11 hj II si

1 i ! 5OoC 1r f

A low reactive, preaccelerated orthophthalic resin giving good demould times in the manufacture of filled castings and figurines. e 22-26/23

381-000 Medium reactive, resilient, modified isophthalic base resin for non-reinforced applications. NOt'ROl

1 bi 70% 11 c i 1300-1500 11 d f 11 k f 100 11 I i 55 11 mf

ai

.. 1i 381-040 :

~ 2 51 et 13-18/23 11 f / 11 ni 3% 11 oi

uI Psii

11 hi I si

1 i i 7OoC 11 r i

Substantially as for 381-000 but UV stabilised and with a typical gel time (e) of 10-15123.

Norm1 450-000 A clear orthophthalic base resin for non-tilled castings. a/

j f 0.8%/28

11 bj 66% 1 c f 800-950 1 d / e29 1 ei 11 k f 120 11 I ! 65 I[ mf 3.8

450600 :

10-16/23 1 f i n f 2.0% j o f

I s! Pi

11 h!

u Cl!

1i I

55Oc ri

A low reactive, low colour, preaccelerated orthophthalic resin for the manufacture of nonfilled castings or encapsulation.

Distitron 3501 C An unaccelerated orthophthalic resin of good clear colour and transparency, for use in transparent casting manufacture.

I ai

I]

b f 66%

I] c j

800

1f f

1 e;

11 di

II si

1 hi

11 i

7OoC

I

Polvmar PMI 90 A medium reactive, low shrinkage, isophthalidNPG casting resin for the production of clear items.

I af

1.12-1.16

11 bi

71-73%

11 c j

1 di

16-20

1 e;

15-20/25

I

271

Databook - Section G2 : Thermoset Resins For Casting, Encapsulation 8, Decorative Items

F 892 An unaccelerated, clear, flame retardant HET-acid based resin, meeting the M3 classification and suitable for casting. ai

, :

11 b i

70% 11 ci 75 11 I {

(1 kl

500 50

11 di 11 e: 11 m; 3.2 I( n f

20/23 1.7% 1 o i

11 f i

1 hi II q i

si

II Pi

11 i i 62OC 11 r i

G 102

An unaccelerated, non-thixotropic, orthophthalic resin for casting.

Silmar S40 A preaccelerated, rapid cure polyester specially formulated to yield fully transparent, water clear castings. a i 1.12 11 b i 63% 11 c i j 1 0.2% I] ki 90 1) I

44Ocps 49

11 d f 11 mi

11 el 11 ni

16/25

11 0 ;

11 f I

11 gi

u Pi

43

11 hi II qi

11 i 7 4 0 ~ 1r i

Silmar S41 A moderately fast, mass casting resin of low exotherm and shrinkage, with exceptional clarity.

Polvlite 32030-1 0 A water-white, clear casting orthophthalic designed for applications demanding extreme clarity and an absence of colour. c. 400-500 e. 14-20/25

Polvlite 32032-00 A water-white, clear casting orthophthalic designed for applications demanding extreme clarity and an e. 18-30125 absence of colour. Cured castings have the same refractive index to glass. c. 300-400

Wresipol 31325 A preaccelerated, low reactivity, non-thixotropic clear casting resin with low shrinkage properties.

CLEAR CAST

An unfilled, all-purpose low shrinkage epoxy casting resin that also offers excellent adhesion to a broad range of substrates. The flexibility of the finished casting can be altered by changes in the resin : hardener (Clear Cast) ratio. 272

- Tool Chemical Company lnc CLEAR CAST 50/50

Offers greater flexibility.

RS-CAST 50 An unfilled, clear, low-cost epoxy suitable for the room temperature encapsulation of electronic components. By adjusting the hardener (V1855) and resin ratio, the working time and physical properties can be altered. RS-CAST-509 A fast room temperature curer casting and potting epoxy offering excellent heat distortion for applications operating at elevated temperatures. Meets Boeing Specification D-32000 Code PHT.

Resipol 9022 An unaccelerated orthophthalic of low colour for filled decorative castings. ai .. I i

11 b (

60-63% 91

11 k i

1 ci

11 I

300-400 50

1 di 11 mi

4.4

1 e; 10-14/25 1 f j 11 ni 1.7% 1 0 ;

9022-BV A low viscosity version of 9022. b. 58-61%

N sj

II P i

I hi II qi

1 i i 65OC 11 r i

c. 250-300

ResiRol 9944 A preaccelerated UV stabilised orthophthalic resin of excellent transparency for clear castings.

Resipol 9991 An unaccelerated, specially formulated resin for special castings.

PX672C A twinpack epoxy suitable for encapsulating. Used with hardener HX672C.

311 Series Three unaccelerated, low viscosity, low surface tension orthophthalic based resins for the manufacture of intricate decorative castings and encapsulation. The last digit either 4, 5 or 6 indicates a slightly increasing viscosity from 4 to 6 poise. e. 9 12/30

-

412

607 626 658

-

-

An abrasion resistant, epoxy casting resin. A high temperature epoxy casting resin with low thermal expansion. A high temperature resistant, epoxy casting resin. A crystal clear room temperature epoxy casting resin with a low exotherm. 273

Databook - Section G3 : Thermoset Resins For Gelcoat Manufacture

Viapal F 140 A low reactivity, medium viscosity orthophthalic offering excellent strain at break properties and suitable for embedding. b. 70% c. 440-680 Vimal H 210BS A co-preaccelerated, low reactivity, medium viscosity and UV stabilised casting resin, curing nearly crystal clear and suitable for biological specimens and large mouldings without cracks. b. 65% c. 950-1240

Viscovoss GTS A preaccelerated, UV stabilised, medium reactive orthophthalic of high transparency and clear colour for casting and encapsulation. Viscovoss KF An unaccelerated, medium reactive orthophthalic with high heat resistance and good transparency, suitable for the manufacture of electronic castings.

G3 THERMOSET RESINS FOR GELCOAT MANUFACTURE ~~

Formerly Sier SA

- Sociedad ltalo Espanola De Resinas S A

FS-611 An unaccelerated, medium reactive orthophthalic for the manufacture of gelcoats.

IS4341 An unaccelerated isophthalic for the manufacture of gelcoats.

184941 An unaccelerated iso/NPG for the manufacture of gelcoats.

ISG-0818 An unaccelerated isophthalic resin for the manufacture of gelcoats.

274

- Resisa

Bettle 8200 Non-accelerated, neo-pentyl glycol/isophthalic resin suitable for formulating into easily pigmented gel coats specifically designed for brush application and offering chemical, heat and weather resistance.

Beetle 8297 Non-accelerated, isophthalic resin for the manufacture of gelcoats for application by brush or spray, which are easily pigmented and exhibit excellent weathering properties. Approved by Lloyd's.. a! j

1

]I

1.13 b! 65% 11 c! 11p/25 1 dj 21 e! 17mg/24 11 k ! 102 1 I i 82 11 mi 4.5 11

13/20

n! 4.0%

11 f 1 11 0 :

11 g! I Pi

45

[ h! 7%

I 91

1ii

11

77OC ri

Palatal A400TL A UV stabilised, unaccelerated, high reactive, thixotropic isophthalic resin. a;

..

]I

11 b i ki

65% 140

11 c j 1I

3200 90

11 di 11 ~

1 hj

[ ef [ f f 3.8 1 ni 4.64% 1 0 ;

n si

[ii

[ ri

Silmar 996 Listed as suitable for gelcoat manufacture. No other details provided.

Silmar SIL 12DA-739 An unaccelerated, general purpose orthophthalidNPG resin offering excellent weatherability and suitable for sanitary ware, marine and automotive application. c. 1100 e. 7/25

Silmar 12DA-740G An unaccelerated, semi-flexible, low colour, isophthalidNPG resin offering excellent weatherability. c. 900 e. 6/25 Silmar 12DA-772 An unaccelerated, rigid, corrosion resistant, isophthalidNPG resin. c. 1200

e. 5/25

ResiDol 9048 An orthophthalic, Lloyd's Registry approved resin for industrial gelcoat manufacture. ai .. Ji

11 bj

6568% 11 96

11 k j

C!

800-1100 54

1 If

11 di 11 mi

3.9

11 e! 12-18/25 1 f / 11 nj 1.7om oj

I gj

II P i

1 h/

u si

1i/

u r f80%

continued: 275

Databook - Section G3 : Thermoset Resins For Gelcoat Manufacture Resisa - continued:

1;

I a;

11 bi

68-71%

11 ci

800-1100

1 ef

1 dj

4-6/25

. .

Ii

Pi

qi

11 r i

Pi

II 41

11 r j

I

Resipol 9578 An isophthalic Lloyd’s Registered resin for the manufacture of gelcoats requiring high elongation.

. .

I:

11 k i

128

I( I

75

11 mi

3.3

11 n f

3.9%

1 oj

II Pi

qi

11 r i

ResiRol 969 7 An isophthalic/NPG resin for gelcoat manufacture offering high heat resistance and good osmosis

HPR CH70 A UV stabilised medium reactive, orthophthalic resin.

HPR G301 A chemically resistant, UV stabilised, isophthalic resin.

276

- lnterplastic Corporation HPR G901 An UV stabilised orthophthalidNPG resin of high reactivity, high weathering resistance and excellent osmosis resistance.

G4 THERMOSET RESINS FOR PIGMENT PASTE MANUFACTURE & ASSOCIATED Formerly Sier SA

- S o i d a d ltalo Espanola De Resinas S A

PG-290 A 100% solid, adipic acid based resin formulated for pigment paste manufacture.

Beetle 8797 Non-accelerated, non-thixotropic, high viscosity resin intended for the production of colour pastes.

Silmar SIL 10DZ-889 An unsaturated liquid alkyd. c. 2000 Silmar SIL IODZ-941 An unsaturated liquid alkyd offering excellent resin compatability.

c. 575

Silmar SIL 1ODA-1112 An unsaturated liquid alkyd offering excellent resin compatability.

c. 1200

Silmar SIL 1ODZ-I175 An unsaturated liquid alkyd offering excellent resin compatability.

c. 90

277

Databook - Section G4 :Thermoset Resins For Pigment Paste Manufacture & Associated

Shortly before going to press, the company was acquired by Reichhold Chemicals Inc. Changes to Jotun manufacturing units, name, distrbution or other arrangements, and with regard to possible alterations in the respective resins supplied, have not been advised. NOrROI 375-000

Monomer free, orthophthalic base resin for the manufacture of pigment pastes.

NOrroOI 376-000 Monomer free, orthophthalic base resin for the manufacture of pigment pastes.

I a;

11 b j

11 c i

10000-12000

11 d i

I

~ 3 5

Wresirool 31391 An unaccelerated 100% polyester resin for pigment paste manufacture.

HPR G805 A styrene and monomer free saturated polyester resin suitable for adding in the manufacture of - dyes, pigment pastes, and having excellent wettabiliy to fillers and pigments.

I a]

1.12

11 bi

11 c f

2500

11 di

c25

I

HPR G810 A styrene and monomer free resin offering excellent wettability to fillers and pigments.

I a!

1.12

(1

b!

11 c f

2500

11 di

20

I

HPR G815 A low viscosity, styrene and monomer free resin exhibiting excellent wettability to fillers and pigments.

HPR G820 A styrene and monomer free resin saturated polyester resin suitable for adding dyes, in the manufacture of pigment pastes, and having excellent wettability to fillers and pigments.

Sirester FSG 583 A saturated resin for paste manufacture.

Sirester FSG 0885 An unaccelerated unsaturated orthophthalic for paste manufacture.

ai 278

11 b j

11 c i

2500

11 d f

20

1

- Cray Valley G5 THERMOSET RESINS FOR FILLER & PUTTY PASTE MANUFACTURE

83-8940 A preaccelerated, rapid cure, thixotropic orthophthalic polyester for the manufacture of automotive repair filler pastes.

89-1400BP A preaccelerated, rapid cure, thixotropic orthophthalic polyester for the manufacture of bonding pastes.

11 b j 1 ki

ai .. J i

11 c i 1Ii

38

11 d f I] mi

11 ei

7/25 8.0%

11 n f

11 f f 11 o f

II si

11 hi

I 41

Pi

11 i f

11 r f

Beetle 8937 A highly flexible, non-accelerated, low viscosity orthophthalic resin allowing high filler loading, high resistance to freeze/thaw cycling, rapid gel-time and cure rate, specially forkulsed for the jointing o f earthenware pipes.

I ai

11 b f

1.01

65%

11 c i

1.6~125

1 di

25

11 ei

u sl

1ff

1 hf

3.3%

11 i 1

Norsodyne 6395502 An amine accelerated, medium reactive, non-thixotropic, isophthalic resin for the manufacture of general purpose and chemical resistant grouts or cements. a! .. Ii

1 bl

57-61% 11 c i 5.0-7.0dPaS 1 d i io8 I i 65 mf

11 k!

n

11 e f 1nf

5-10125

1 0:

1ff

11 gi

u Pf

45-50

1 hf II qf

1 i f 90% 11 r f

Norsodvne 6513 An amine accelerated, medium reactive, non-thixotropic, orthophthalic resin for the manufacture of general purpose grouts or cements.

Norsdvne 6520 An amine accelerated, medium reactive, thixotropic, semi-flexible orthophthalic resin for the manufacture of many forms of putty and filler paste, with good sanding properties.

I ai

I] b!

70-74%

I] c f

17.5-22.5dPaS

1 dl

1 e!

4-6/20

I

Norsodyne 6524 An amine accelerated, low reactivity, thixotropic, flexible orthophthalic resin for the manufacture of many forms of putty and filler paste.

I ai

1)

bi 67-71%

c i 8.5-11.5dPaS

1 di

11 e i

5-6/20

I 279

Databook - Section G5 : Thermoset Resins For Filler & Putty Paste

Palatal E200 An unaccelerated, low reactive, elastic, non-thixotropic resin designed for the manufacture of mastics and putties.

1 b j 65% 11 cj 11 k i 11 I

a. :.

325 1 di 11.5 11 mi

11 ej

11 n i

i f :

60%

11 oi

II si, Pi

11 hi II q f

ii

11 r j

Svnoiife 64944-1 A base resin for the manufacture of mastics and putties.

Arorooi 3145 A Suitable for the manufacture of filler pastes for automotive use.

Siimar SIL 07BA-896B An isophthalic offering good flexibility in the manufacture of patching materials. c. 130 SIL 07BA-896C

A variant of different viscosity and gel time. c. 450

e. 18/25

e. 35/25

Siimar SIL 07BA-1053 A low viscosity, room temperature BPO cure orthophthalic for patching applications. e. 10/25 c. 250 Silmar SIL 07BA-1061 A very low viscosity, fast gel and cure, DCPD orthophthalic resin for patching applications. c. 150 e. 8/25 SIL 07BA-1069

Without DCPD variant. Meets SCAQMD Rule 1162. c. 120

Siimar SIL 07DA-896E An unaccelerated isophthalic offering full flexibility. c. 900

-

Fuii 831 Polv~uttvResin For the manufacture of polyester filler pastes.

280

e. 4/25

e. 4/25

- Resisa Shortly before going to press, the company was acquired by Reichhold Chemicals Inc. Changes to Jotun manufacturing units, name, distrbution or other arrangements, and with regard to possible alterations in the respective resins supplied, have not been advised.

Norpol 472-000 A medium reactive, flexible, amine accelerated orthophthalic base resin for putty paste manufacture.

I ai

11 b i

472400 :

As for 472-000.

69%

11 c i

11 di

600-700

c30

11 e l

I

12-15/23

Nomol 620420 A high to medium reactive, amine accelerated rigid tetrahydrophthalic base resin, cured with BPO and suitable for putties and filler pastes. Resistant to standard and methanol containing petrol. a; 1 b i 68% 11 ci j 0.8%/28 1 k f 115

800-1200 60

1 If

I df

11 mi

<35 4.2

1 ei

11 n f

6-8/23 11 f j 2.0% 11 o!

I !$ II P i

I hf

II qi

11 i .i 7 4 0 ~ 11 r i

Norpol 670-000 A highly reactive, rigid orthophthalic base resin with a high heat distortion temperature, formulated for putty and filled applications.

Norpol 750-000 A highly reactive, amine accelerated, flexible isophthalic base resin specifically designed for blending with rigidresins in the manufacture of putty pastes.

I( b i

a. i.

69%

11 k j

1 c:

500-650

11 I

1 di 4 11 mi

11 e ;

6

6-10123 6.5%

1 ni

11 f i 11 0 ;

II si. PI

11 hj II 41

11 i i 11 r !

1

Polvflex GR 200-51 An isophthalic resin designed for the manufacture of putty pastes.

I ai

1.10

11 b i

64%

11 c i

600-750

11 di

20

11 el

IO-20/25

I

Wresipol 31417 A preaccelerated polyester for highly filled filler paste manufacture.

I

a;

11 b i

11 c ;

0.3Pa.s

11 dj

11 e:

4/25

I

Resipol 9044 An unaccelerated orthophthalic resin for marble putties.

281

Databook - Section G5 : Thermoset Resins For Filler & Putty Paste Resisa - continued: Resirool 9074 An unaccelerated orthophthalic resin for marble putties, offering enhanced heat resistance.

Resirool 9304 A preaccelerated, specially formulated resin for the manufacture of car body putty pastes.

Resirool 9342 A preaccelerated, orthophthalic resin for marble putties.

HPR S440 An amine accelerated orthophthalic with good filler wettability for putties.

I ai

1.11

11 b i

65%

11 c i

5OOmPas

11 dj

26

11 ej

8/25

I

HPR S490 An amine accelerated flexible orthophthalic with good filler wettability for putties.

SP Handipack A multi-purpose epoxy suitable with the addition of fillers (SP Filler Powder in four wades - microballons; glass bubbles; microfjbres and colloidal silica), for the manufacture of a filler paste suitable for use with wood, metal, GRP or concrete.

Viaroal F 150B An amine preaccelerated, low reactivity, high viscosity orthophthalic for flexible knifing and filling putties with goodadhesion. b. 69% c. 1200-1580 Viapal VUP 47068 An amine accelerated, high reactivity, medium viscosity orthophthalic offering bright colours for putties and c. 810 - 1090 fillers in the stone industry. b. 64.5%

282

- Ashland Chemical Company Inc

G6 SYSTEMS FOR SMC & BMC MANUFACTURE

E-8000 Series A series of specially engineered resins based on a unique polyesterhiny ester hybrid technology formulated with a thermoplastic polyester low-profile additive, for structural SMC that perform like a vinyl ester but that chemically thicken with the ease and consistency of polyester.

Arotech 2002 A low shrink. low Drofile resin containing - vinyl - ester for SMC and BMC applications, with high heat resistance and high tensile elongation. Can be employed as a low profile additive --see section H8.

Arorool 50411 Phase Epsilon Resin An SMC body panel, Class "A" finish, resin system.

ArOROl 50418 A Class B, zero shrink, high reacitivty polyester resin designed to be compression moulded at 137 - 155OC, as in the manufacture and use o f fast cure sheet moulding compounds. Finds automotive as well as structuraVindustrial applications.

Arorool D-I 663 A high reactivity, chemically thickenable, unaccelerated polyester containing up to 28% recycle content which performs well with low profile additives and exhibits consistent lot-to-lot thickening, Finds SMC, BMC, RTM, wet-moulding and pultrusion processing application for truck panels, structural parts and general purpose use.

Arorool MR 13006 A reactive polyester resin designed to provide fast cure at 155OC in 100 mil sections and providing a super smooth Class " A surface finish for SMC and TMC applications.

I

ai

1 bf

62.5%

11 c i

580

11 dj

18

11 e :

1f i

3.5

11 gj

11 h ]

11 i i

I

continued:

203

Databook - Section G6 :Systems For SMC & 5MC Manufacture

Ashland Chemical Company Inc - continued: Envirez 8030 A high-reactivity, chemically thickenable, unaccelerated polyester containing up to 40% recycle content, which performs well with low profile additives and exhibits consistent lot-to-lot thickening. Finds SMC, BMC, application for truck panels, structural parts and general purpose use.

I ai

11 b i

62%

1 ci

1210/25

]I d f

11 e !

17

1fi

3.5

11 gj

1 hi

11 i i

Phase Beta 50421 An SMC body panel, Class "A", resin system for SMC application, offering reduced waviness in deepdraw parts and excellent paint and bondability.

Beetle 811 Pre-accelerated low profile, highly reactive, fast curing, orthophthalic resin of limited pigmentability for polyester moulding compound manufacture, offering mouldings with excellent surface finish, good paintability and heat resistance.

I ai

1.10

11 b ]

62%

11 c ]

19p/25

11 d ]

16

11 e !

9/82

I

Beetle 812 Medium viscosity, unaccelerated system, suitable for SMC/BMC manufacture, giving exceptionally high quality surface finish with low profile additive compatibility, highly reactive and fully pigmentable.

I ai

1.10

(1 b ]

63%

]I ci

12p/25

11 di

11 ei

37

10/82

11 f j

II si

1 hj

11 i :

143OC

I

Bettle 8115 Low profile orthophthalic resin for SMC/BMC manufacture, giving excellent surface finish, low shrinkage and offering good paintability, highly reactive and heat resistant but with limited pigmentability.

Bettle 8128 Non-accelerated, high viscosity, high reactivity, fast curing, orthophthalic fully pigmentable resin suitable for compression moulding, and offering excellent mechanical strength and elevated temperatures with resistance to mild chemical reagents.

1)

a ] 1.12 11 b ! 65% c ! 8p/25 j ! 22mg124 ]I k f 100 I 56

1

1 di 22 1 e ] 1 mi 4.1

19/20

n!

11 f f 11 0:

11 g ]

u PI

50

11 h] 8% 11 i ! 95OC I si 1r i

Beetle 8143 Unaccelerated, medium viscosity, highly reactive, orthophthalic resin, suitable for SMC manufacture, providing mouldings with excellent mechanical strength at elevated temperatures, resistant also to mild chemical reagents.

I ai

1.12

11 b i

66%

1 ci

1 dj

8p/25

30

1 ej

9/82

I

Beetle 8608 Non-accelerated, medium viscosity, highly reactive, fast curing, fully pigmentable isophthalic resin particularly suitable for the manufacture of polyester moulding compounds offering excellent mechanical strength at elevated temperatures and resistance to mild chemical reagents.

11

11

a; 1.12 b j 62% c ] 6p/25 j .i 18mg124 k j 110 If 60

284

1

1

)I

d]

26

11 mf

11 ei 4.0

9/82

ni

11 f ] 11 0 ;

11 gj II P!

50

11 hj 8% 11 i f II si \I

105OC r!

- Cray Valley

81-2233 A high reactivity, general purpose orthophthalic polyester resin for the manufacture of BMC. ai

.:

11 b i 65% 11 C I 600 11 di 11 k ! 110 11 I i 60 11 mi

11 e! 3.8

5/82 1.8%

11 n!

11 gi II Pi

11 f 11 oi

50

11 hi II qI

Ii I 90% 11 r i

81-7100 A high reactivity, general purpose orthophthalic polyester resin for the manufacture of SMC. ai . ,

li

I] b f 66% 11 ci 11 ki 110 11 I

800

i

59

Idj 11 mi

11 ei 3.8

6/82 1.8%

11 ni

11 f i 11 o i

gi

50

II Pi

11 h i II 41

1 if

90°C

11 r i

Norsodyne M 00400 A highly reactive polyester for the manufacture of low profile BMC (when employed in conjunction with shrink control additives A154 & A158) and other prepregs. Can also be employed for pultrusion.

Norsodyne M0070C This system offers a low shrink, high gloss. ai

..

I] b!

66% ci 13.5dPaS 11 d! 100 1 I i 11 mi 3.6

11 k i

11 ei 11 n;

1.02

11 0 ;

1f i

U pi

I Pi

11 hj II si

11 i f 135OC I] r j

1 hi

11 i j

11 hi

1i j

Norsodvne M04960 A “Class A”resin for “tough” formulations.

Norsodyne M4721 For the manufacture of low shrink, injectable BMC materials. ai j i

11 b!

67%

]I c!

13dPaS

11 d f

11 ei

1.75

11 f i

11

I si 0:

II ai

II r i

125OC

Norsodyne M05501 For the manufacture of standard and low shrink, SMC.

Norsdvne M71101 An isophthalic system for impact resistant formulations. ai .. I i

11 b i

11

61% 11 ci 10.5dPaS 11 d i k i 140 11 I i 85 11 mi 3 6

11 e!

11

ni

3.33 3%

11 oi

Ufi

II

II pi ni

II n i

II r

105OC i

285

Databook - Section G6 :Systems For SMC & BMC Manufacture

GP 582D58 Resiset A phenolic resole specially developed for use in the manufacture of SMC and BMC. The resin is designed to be processed on current SMC & BMC systems thereby eliminating major capital expenditures and system changes. b. 74-78% c. 800-16OOcps.

ArOROl 7030

Suitable for both SMC & BMC manufacture. No other details provided. Crvstic D 3679 Suitable for both SMC and BMC manufacture. i. 110°C

No other details provided.

Silmar SIL 17DA-857 A flexible isophthalic suitable for chemical resistant applications. c. 2300 Silmar SIL 40DA-542 An orthophthalic resin for BMC manufacture. c. 3000

d. 15

d. 12-16

f. 4

f. 7

Silmar SIL 42DA-816P An isophthalic resin suitable for both SMC & BMC. Stated to find application in communication equipment d. 28-32 f. 30 and transportation components. c. 550 Silmar SIL 42DA-888 An isophthalic resin with a long shelf life, stated as suitable for industrial parts, doors and antennas. C. 2050 d. 27-34 f. 10 Silmar SIL 42DA-944 An isophthalic resin for the SMC/BMC moulding of marine parts, showers, basins and laundry tubs. C. 2450 d. 21-27 f. 7 Silmar SIL 42 DA-946 An isophthalic/NPG resin for SMC manufacture, requiring water and corrosion resistance. C. 1100 d. 16-24 f. 6 Silmar SIL 42DA-959 A pentyl-glycol/maleic resin for the manufacture of SMC required for automotive application. C. 550 d. 29-37 f. 30 Silmar SIL 42DA-1014 An isophthalic resin for SMC and BMC manufacture. c. 3300 Silmar SIL 47DA-452B A general purpose, orthophthalic. c. 2800

d. 34

d. 12-16

f. 14

f. 5

Silmar SIL 47DA-864

An isophthalic stated as suitable for military shipping containers. c. 1900 Silmar SIL 47DB-94M A general purpose, orthophthalic. c. 3050

286

d. 32

f. 5

d. 9-14

f. 5

- Jotun Polymer AS

Fuli- 913 SMC Resin For the manufacture of sheet moulding compound.

-

Fuli 915 SMC Resin For the manufacture of sheet moulding compound.

-

Fuli 1985 SMC Resin For the manufacture of sheet moulding compound.

Shortly before going to press, the company was acquired by Reichhold Chemicals Inc. Changes to Jotun manufacturing units, name, distrbution or other arrangements, and with regard to possible alterations in the respective resins supplied, have not been advised. NOrROI 640-000 A highly reactive terephthalic base resin, showing good mechanical properties and formulated for SMC/BMC manufacture.

640-700 :

A preaccelerated medium reactive terephthalic system, otherwise as for 640-000, but exhibiting a viscosity, (c), of 11900-1300 and a typical gel time (e) of 15-25/23. Recommended for petrol tank manufacture. RDT 3 to 8mm.

NOrROl 650-000 A highly reactive, rigid isophthalic base resin, offering good heat-ageing properties and especially developed for SMC/BMC (Class F) manufacture.

ai ..

1 b ! 60% 11 ci 900-1200 11 d! 11 ki 90 I I i 42 I mi

4 8 3.6

11 e ! 8-12/23 11 f 1 11 ni 1.2% 10:

u !$

n Pi

11 h (

I qi

11 i 1

650-050 :

One component unaccelerated, thickenable low profile isophthalic. c 2600-2900

650-060 :

Similar to 650-050 but with reduced low profile properties compared to 650-050.

135OC

jJ r !

NOrROl 660-000 A very highly reactive, rigid maleic orthophthalic base resin, specially formulated for low profile SMC manufacture.

continued: 287

-

Databook Section G6 ;Systems For SMC & BMC Manufacture Jotun Polymer AS - continued: NorRol 670-000 A highly reactive, rigid orthophthalic base resin with a high heat distortion temperature, formulated for moulding compound manufacture. Can be blended with 680-000 series resins to give differing levels of fire retardancy - see manufacturer's datasheets.

670-040 :

Low profile, unaccelerated, high reactive, version of 670-000 for DMC manufacture. c 900-1300

670-050 :

Further unaccelerated low profile version of 670-000, but to reduced effect compared to 670040.

670-060 :

A low profile version of 670-150, can be regarded as a standard orthophthalic LP system.

670-100 :

Unaccelerated modified orthophthalic, thickenable, to be used with a low profile additive for pigmentable mouldings.'

670-150 :

Unaccelerated medium-to-high reactive, toughened system. *c 900-1300

n 1.8%

NorRol 680-000 A highly reactive, rigid isophthalic base resin suitable for SMC/BMC (Class F) manufacture. Thickenable with isocyanates. Provides good heat ageing properties. af 11 bi 66% 11 c f 1100-1300 j f 1.0%/28 11 k i 90 11 I 45

11 d f 11 mi

e25 3.7

1 e f 10-18/23 11 f j 1 n f 1.4% 11 o f

It 91 II Pi

11 h f

It 41

1 i f 125OC 11 r f

680-300 :

An unaccelerated, thixotropic, isophthalic resin as for 680-000, but exhibiting a different viscosity (c 900-1100) and a typical gel time, (e), of 40-50/23. Provides some chemical resistance.

680-700 :

A preaccelerated, medium-to-high reactive, thixotropic resin otherwise as for 680-000, but exhibiting a different viscosity (c 900-1100) and a typical gel time, (e), of 15-25/23.

680-800 :

A preaccelerated, medium reactive, thixotropic resin otherwise as for 680:000, different viscosity (c 900-1100) and a typical gel time, (e), of 40-50123.

NorRol 690-000 A medium to highly reactive isophthalic base resin suitable for manufacture. Thickenable.

but exhibiting a

low profile/low shrink SMC/BMC

Distitron 183 An unaccelerated, isophthalic resin of high chemical resistance for use in the manufacture of SMC/BMC moulding compounds.

Distitron 270 S An unaccelerated orthophthalic resin specifically for the manufacture of SMC/BMC moulding compounds.

J

a!

288

1 bj

70%

11 c f

2500

11 di

11 e !

11 f i

II sl

low shrinkage, low profile

\I hj

\Ii !

13OOC

\

- Neste Polyester

I si Distitron 414 CVlO An unaccelerated, high reactive, orthophthalic resin for the manufacture of hot-press moulding compounds.

I ai

11 b i

68%

11 c i

1000

11 di

11 ei

11 f i

It si

11 hi

11 i i

1

IIOOC

Distitron 423 An unaccelerated maleic system, specifically designed for the manufacture of SMCIBMC moulding compounds offering very low shrinkage and excellent low profile characteristics.

Distitron H422 An unaccelerated, halogenated system for the manufacture, of hot-press moulding compounds.

I ai

1 bi

77%

1 C/

600

1) d /

1)

11 f ;

e;

II si

1 hi

1i i

930~

I

Distitron H482 An unaccelerated, halogenated system for the manufacture of hot-press moulding compounds.

Polvflex GR 200-29 A hinhlv reactive isophthalic specifically formulated for the manufacture of SMC and BMC materials. Can be readily ihickened with magnesium oxide paste.

11 b i 68% c! 1300-1700 1 d! 43mg/7 1 ki 118 11 I i 60 11 mi

a i 1.13 j

1

1 e! 1 nj 2%

18

f 10:

[ 5-7

1 g;

I

Pi

11 hi

u ql

Ii i

90%

ri

s 599 An unaccelerated, isophthalic resin offering very good heat resistance and suitable for SMC/BMC manufacture.

S 8182V33 A preaccelerated orthophthalic containing low profile additive for SMC/BMC manufacture.

continued: 289

-

Databook Section G6 :Systems For SMC & BMC Manufacture Neste Polyester - continued: S 8512 A preaccelerated orthophthalic offering good heat resistance, for SMCIBMC manufacture.

Resipol 9264 An orthophthalic, low shrink resin for the manufacture of SMC, BMC & DMC. ai

..

Ji

)I

b f 62-65% 1 c f 800-1100 k f 108 11 I f 34

11

1 df 11 mi

3.8

1 ef 11 ni

6-8/25 11 f f 1.5% 11 o f

I 9; I Pi

11 h f

u 41

1 if

IOOC

11 r f

Resipol 9274 A low shrinWprofile isophthalic resin for the manufacture of SMC, BMC & DMC.

Resirool 9284 A low shrinkllow profile maleic acid resin.

Crvstic 198 A medium viscosity orthophthalic, suitable for the manufacture of DMC and with suitable thickeners, for SMC.

Sirester BSM 0844 An unaccelerated bisphenol resin suitable for SMC & BMC manufacture.

1 ai

11 b i

60%

11 c !

100rnPas

1 d!

15

11 ef

Ilfi

16

I

Sirester FSG 583 An unaccelerated, saturated resin for filler paste manufacture.

Sirester FSM 0817 An unaccelerated, high reactive, malkic-propylenic based resin for the manufacture of low profile SMC and BMC compounds. aj

290

11 b;

63%

11 c !

1200mPas

11 d f

15

1 e!

i f f

8

I

- Vianova Resins AG Siresfer FSM 0825/HW An unaccelerated, high reactive, high thickening rate, orthophthalic for SMC/BMC manufacture.

FSM 0825/DP

A variant of FSM 0825/HW with a high thickening rate.

FSM O825/HWR

A low viscosity version of FSM 0825/HW.

FSM 0825/LWR

A further variant with a thickening behaviour similar to FSM 0825/HW

c. 750mPas

Siresfer FSM 0892 An unaccelerated, orthophthalic of excellent flexibility, offering excellent glass and mineral filler wettability in the manufacture of SMC & BMC compounds.

Swancor SW-979 A thickenable vinyl ester with fast glass wettability for the manufacture of SMC/BMC materials. Stated to have better rheology than unsaturated polyester SMC/BMC's, hence allowing the use of lower moulding pressures. (No further details provided by the manufacturer.)

Viaaal VUP 4516 A high reactivity, medium viscosity orthophthalic resin for the manufacture of SMC & BMC. Can be easily thickened with MgO and offers prolonged mouldability. b. 66% c. 1090 1350

-

Viaaal VUP 4619 A highly reactive, high viscosity orthophthalic resin which in combination with low shrink and low profile additives, is suitable for SMC manufacture and then car body, furniture and electrical mouldings. b. 72% C. 3900 - 4910 Viaaal VUP 4681 A high viscosity, high reactivity orthophthalic resin for. SMC & BMC manufacture offering high dimensional stability and a rapid thickening rate with MgO. b. 66.5% c. 1460 - 1800 Viaaal VUP 4715 A very high reactivity, high viscosity orthophthalic resin for SMC & BMC manufacture where both high surface quality and high dimensional stability at elevated temperature is required. In comparison to VUP 4516 and VUP 4681, the cure time is shorter. b. 65% c. 1600 - 2060

291

Databook - Section G7 : Tooling Materials & Laminate Resins

G7 TOOLING MATERIALS & LAMINATE RESINS N.B. Not tooling gelcoats - see C4.

EL-301 A room temperature cure unfilled epoxy for tooling, offering maximum wet-out, low viscosity, low odour and 1. 274 high mechanical and physical properties. a. 1.10- c. 1,000-2,000cps k. 291 EL-301 LP

Offers a longer working life than EL-301

EL-302 A room temperature cure, filled epoxy offering excellent handling characteristics, high strength and dimensional stability in the manufacture of tooling. a. 1.35 c. 3,000-5,000cps k. 245 I. 182 EL-302PC An improved wet-out version. EL-302PC-LP Also offers a longer work life. EL-328 A high temperature resistant, epoxy for the manufacture of tools requiring the highest possible dimensional stability. a. 1.06 c. 4,500-6,500 k. 306 I. 217 EL-328-1

A longer working life version for autoclave application.

EL-336 A room temperature cure, unfilled epoxy for high temperature resistant tooling. 1. 252 a. 1.139 c. 2,000-3,000cps k. 325

8-3P An accelerated, general purpose, thixotropic isophthalic offering excellent mechanical properties and high chemicaI resistance.

ai 1.075 11 b j 51% II c i 750 .. 11 kl 131 11 I i 75.8 1i

11 d i 11 mi

3.65

11 el 11 n i

18/25 3.7% 11

11 f i 0;

11 gi II P i

41

11 hi

I qi

11 i f

95%

11 r !

€pophen EL-5/EHT-88 Catalvst An impact resistant epoxy laminating system for tooling application.

BC-350 Toolina & Masterinq Material Comprises a low density, easily machined, syntatic backup structure which can be used by itself, with a facecoat, or prepreg face skin as the tool surface.

BC-400 Toolina & Masterina Material Comprises a low density, easily machined, syntatic backup structure which can be used by itself, with a facecoat, or prepreg face skin as the tool surface. At room temperature BC-400 has the consistency Of casting sand and is readily packed into or onto master moulds without air entrapment. 292

- Jofun Polymer AS

StVrOOl040-2989 A preaccelerated, thixotropic, isophthalic polyester offering a higher heat resistance than general purpose laminating resins and otherwise formulated for the building of mould-tools. Can be used in conjunction with the 945 series high gloss tooling gelcoats.

E-772 A industrial grade epoxy exhibiting good mechanicals and a 5-day out-time for the manufacture of tools. Cure temperature 90-15OoC and service temperature up to 135OC.

w-221 ? / I2 A premium grade, high heat distortion isophthalic tooling resin. c. 400-53Ocps

Arofool 2000 P A medium cure, thixotropic tooling resin. e. 34/25

e. 35-45/21

i. 110°C

Arofool 2001 P A thixotropic tooling resin. i. 125OC

Silmar SIL75AA-610 A corrosion resistant isophthalic suitable for tooling. SIL75AA-61OS

c. 1050-1800

e. 17/25

A higher viscosity, longer gel time, lower peak exotherm, ‘summer’ variant. c. 1425-2500 e. 26/25

Silmar SIL75AA-821 A corrosion resistant isophthalic suitable for tooling.

c. 500-1500

e. 17/25

SIL75AA-821S

A longer gel time, lower peak exotherm, ‘summer’ variant. c. 500-1500 e. 21/25

Norpol 410-900 :

Preaccelerated, low reactivity orthophthalic tooling resin which cures with relatively low shrinkage at ambient temperature. c 1100-1300 e 40-50123

293

Databook - Section G7 : Tooling Materials & laminate Resins

Polvlite 33540-00 An unaccelerated, non-thixotropic blended polyester specifically developed to be used with aluminium trihydrate filler in the fabrication of FRP tooling. c. 120 e. 22/25

DT-2000-A A lightweight, colour coded, two component epoxy system which on mixing forms a soft dough-like consistency that cures at room temperature with a low exotherm to provide a quick ‘foam core’ for tool construction. HHTD-”A” A lightweight, colour coded, high heat, two component epoxy system which on mixing forms a soft doughlike consistency that gels at room temperature before a post cure to form a foam core for tool construction. HTL-250 A tough, hard, impact resistant, room temperature cure epoxy laminating resin, offering excellent heat distortion resistance for tools operating at elevated temperature. Two alternative hardeners are available, HT-8401 and HT-9234. HTL-509 A tough, hard, impact resistant, room temperature cure epoxy laminating resin, offering excellent heat distortion resistance for tools operating at elevated temperature. Three alternative hardeners are available, HT-106-3, HT-8433 and HT-9234. HTL-6040 A tough, hard, impact resistant, room temperature cure epoxy laminating resin, offering excellent heat distortion resistance for tools operating at elevated temperature. HTP-515 A high temperature epoxy patching paste offering excellent heat distortion resistance for tooling operated at high temperature. HTR-350 A tough, hard, impact resistant, room temperature cure epoxy laminating resin, offering excellent heat distortion resistance for tools operating at elevated temperature. Two alternative hardeners are available, HT-8433 and HT-9234 LR-100 A white, low odour, low viscosity, low toxicity- epoxy . - laminatinn resin designed for close dimensional tolerance automotive and aircraft iooling applications, offering high impact resistance. Two hardeners are available, LH-101 offering a ‘standard’ room temperature cure, and C-201 offering a ‘slow’ room temperat ure cure. LR-105 A white room temperature, but fast curing epoxy resin with excellent wet-out, designed for fast patch repair of tooling or component laminates. LR-200 A sea-foam green, low odour, low toxicity, high physical property room temperature cure, epoxy laminating

resin offering low shrinkage and good dimensional stability, -for the manufacture of aircraft and automotive composite tooling. Also available pigmented white, with two hardeners: LH-102 (Boeing specification) and LH-102-S.

294

- Blagden ManufacturedChemicals LR-300 A white, low odour, low toxicity room temperature cure, epoxy laminating resin offering low shrinkage, good dimensional stability and high physical .properties, and designed for- the manufacture of high quality automotive and aircraft tooling applications. TOOL LITE A lightweight, colour coded, two component epoxy system which on mixing forms a soft dough-like consistency that cures at room temperature with low shrinkage, excellent toughness and dimensional stability used as a foam core for tool construction.

The following epoxy tooling systems are listed:

205 301 306 306LS 307 625 626 630 634 635

A general purpose laminating resin with a short pot life. Good wet-out, low exotherm, low shrink. A fast cure, low exotherm, safety laminating system. A low shrink, fast cure low exotherm system. A low viscosity, fast cure, low exotherm system. A high temperature laminating resin with excellent thermal shock resistance. A high temperature resistant laminating resin. An unfilled, high temperature laminating resin. A high temperature laminating and vacuum bagging resin. A high temperature laminating and vacuum bagging resin.

Viapal H 265 A high reactive, medium viscosity orthophthalic offering high impact strength and resistance to aromatic hydrocarbons. b. 66% c. 1100-1400

H 265E An enhanced storage version of H 265.

G8 UNCLASSIFIED OR FOR UNCLASSIFIED USE

81-1638T A preaccelerated, thixotropic, rapid gel and cure, orthophthalic polyester specifically designed for anchor bolt fixing, mortar and grouting.

84-13-24 A preaccelerated, thixotropic, flexible, isophthalic polyester for use as the matrix in the manufacture of insitu roofing membranes. a: .. J i

11 b! 57% 11 c f 900 1 df I] kj 11 I f 10 1 mi

1 ef

12/25 Ij f f

]I ni

100%

11 oi

1 hi

u si

jii ri

295

-

Databook Section G8 :Unclassified Or For Unclassified Use

BrvteCor EX-1541 Svntatic Foam An extremely low density 149°C 177°C curing, cyanate ester syntatic foam offering good structural properties even if not pressure cured. Can be simply packed or injected into tooling cavities or extruded with the proper tooling. Can also be supplied in cured billet form from which products can similar to working with balsa wood - be accurately machined and hand finished.

-

-

BC-350 Prototvpina Material Cured at between ambient and 149"C, this prototyping and mastering material is based upon Bryte's low density syntatic foam technology. The system comprises a thin resin face coat, backed with the foam and is suitable for compression, RTM, thermoforming moulding and casting. BC-400 PrototvPina Material Similar in use and application to Bryte's BC-350 grade, this higher cure temperature (60 177°C) prototyping and mastering material, offers a higher working temperature.

-

Araldite 252NB A two-component, room storage, self-extinguishing, low out-gassing syntatic offering a good surface finish. a. 0.63 e. 90/23 i. 80°C Eroocast 927 A one component, frozen storage, extrudable self-extinguishing syntatic offering very high compressive strength and excellent temperature performance up to 200°C. a. 1.22 e. 1440/23 i. 200°C Eroocast 1610 A one component, frozen storage, ultra-low density, self-extinguishing syntatic, with a very long working life at room temperature. a. 0.5 e. 43,200/23 i. 90°C Eroocast 1614ATF A one component, frozen storage, ultra-low density, self-extinguishing extrudable, non-flow after application syntatic, with a long work life. a. 0.75 e. 480/23 i. 180°C Eroocast 1617NB A two-component, room temperature storage, high strength, easy to handle, room temperature cure syntatic. a. 0.7 e. 60-90/23 i. 90°C Epocast 1637NB A two-component, room temperature storage, ultra-low density extrudable, non-flow after application, syntatic with a long work life. a. 0.5 e. 50/23 i. 100°C Eroocast I6 3 8 ~ ~ A two-component, room temperature storage, fast cure, self-extinguishing, non-flow after application, syntatic. a. 0.7 e. 10-20/23 i. 175°C Epocast I681NB A two-component, pre-weighed, room temperature storage, self-extinguishing syntatic, sandable within 10 minutes for fast and easy repairs. a. 0.7 e. 3/23 120°C Epocast 87005NB-80 A two-component, room temperature storage, ultra-low density, non-sag, self-extinguishing syntatic, pale cream in colour and suitable for interior use. a. 0.5 e. 120/23 i. 90°C

296

- lnferplasfic Corporation Erooserts A range of preformed, cured, epoxy inserts, fabricated from Epocasf syntatics and of minimal void content, designed to typically reduce the time required to reinforce honeycomb sections by eliminating weighing, mixing, gelling and curing procedures.

Synolite 8130-N-1 An unaccelerated, flexible isophthalic system.

I ai

1.2

11 bi

69%

11 c i

8-10dP/25

11 di

15-20

11 e;

32.925

I

S-860 A silicone resin for prepreg application with good electrical and high temperature characteristics in the manufacture of structural parts. Cure temperature 175°C with a step post cure and a service temperature potential of 260%. Meets MIL-P-25518.

Gelcoat Enhancer A hybrid structural urethane that can be utilized to enhance the surface quality of a FRP polyester composite. It may be sprayed between a conventional gelcoat or urethane gelcoat and the FRP polyester.

Duratec Hi-Gloss A special blend of polymers to incorporate in tooling and production gelcoats to reduce porosity and brittleness, whilst increasing gloss, as well as impact resistance Duratec Epoxv Bond-Cote A special blend of polymers that produces an air-cure film which bonds polyester resins and coatings to epoxy resins and coatings. Can be spray, brush or roller applied. Also excellent for use as an air-cure coating for corrosion-resistant air-inhibited systems. Duratec Vinvl Ester Primer A easily sanded, porosity-free, high-build, primer designed to repair osmosis and blister damage of composite surfaces. Also finds application in RTM and vacuum forming mould surfacing. Available pigmented white (1794-005) or grey (1799-005).

Silmar SIL 0588-465 A full flexible, fillable, fast gel and cure, dark colour resin containing wax and suitable for the manufacture of furniture parts and decorative mouldings. c. 525 e. 8/25 Silmar SIL 7522-389A A solid isophthalic alkyd for the manufacture of prepreg moulding compounds.

continued: 297

Databook - Section G8 :Unclassified Or For Unclassified Use

lnterplastic Corporation - continued: Silmar SIL 76DA-949 An unaccelerated, tough, high impact resistant, unsaturated polyester polyol. b. 70%

c. 450

d. 2

Silmar SIL 76DA-953 An unaccelerated, rigid, high heat distortion temperature unsaturated polyester polyol. b. 70% C. 190-240 d. 2 Silmar SlL 76DA-1176 An unaccelerated, rigid, high heat distortion temperature unsaturated polyester polyol. C. 110-130 d. 2 b. 70% Silmar SIL 76DA-1177 An unaccelerated, rigid unsaturated polyester polyol. b. 69%

c. 110-130

d. 2

N.B. Accelerated versions of all the above are available to give a wide range of gel times with various isocyanates.

Resipol 9433 An unaccelerated orthophthalic resin for the manufacture of artificial wood.

Resipol 9902 A styrene free maleic acid resin for the manufacture of prepregs used for electrical purposes.

I aj

11 b ]

58-61%

11 c j

4000-5000

11 dj

11 e ;

8-10/25

I

Resipol 9975 An unaccelerated orthophthalic resin suitable for in-situ applied roof laminates.

SP 80 A toughened pale green pigmented, epoxy adhesive film on a glass carrier, offering excellent tack and drape characteristics and many advantages such as a consistent bond-line thickness, weight, convenience, high toughness and a high strain to failure over traditional wet-lay techniques in the bonding of composite skins to cores. SA 80 can also be supplied without a carrier, precoated onto one surface of any compatible SP prepreg.

-

SP Amprea Preqel A highly thixotropic epoxy resin modifier whose principle use is to reduce drainage of laminating resins on

vertical surfaces. However it is equally applicable for secondary bonding or for the bonding of core materials. It can be employed with a variety of hardeners.

- Vianova Resins

Flake Compounds A ranae of specially formulated compounds made from Swancor vinyl esters (see section D3) and chemically inert glass flake, for the production of corrosion resistant liners to for example, metals, concrete, flooring, marine structures. SW-901FL-R SW-901F L S SW-901FL-T

For processing by roller. For processing by spray gun. For processing by trowel.

Similar compound variants can be supplied using any Swancor vinyl ester, when the coding will change accordingly. For example 905FL-T is a trowelling compound employing glass flake and Swancor vinyl ester 905.

Viaaal L 700 A medium reactivity, high viscosity resin with good resistance to chemicals, used for filled industrial floorings which cures tack-free with a good surface gloss. Approved by Austrian Foodstuffs Act 1975. b. 65% C. 3000-4500

299

SUNDRY THERMOSET RESIN APPLICATIONS Page

HI

FLEXlBlLlSlNG RESINS Ashland Chemical Hispania BIP Limited DSMOBASFStructural Resins lnterplastic Corporation Jiangyin Crabe Synthetic Chemicals Co Ltd Jotun Polymer AS (See note prior to resin descriptions) Neste Polyester Resisa Scott Bader Company Ltd Sirca SPA SIR lndustriale Vianova Resins AG

H2

305

306

306

PRIMERS Ferro Corporation Hawkeye Industries Inc Hawk International Distributors Ltd Jotun Polymer AS (seenote prior to resin descriptions) Lilly Industries Inc SP Systems Ltd Swancor lndudstrial Company Ltd

H4

304

FOR LAMINATING 8t BONDING GLASS Ashland Chemical Company Inc Ciba Specialty Chemicals Jotun Polymer AS (See note prior to resin descriptions)

H3

303

307

308

SATURATED POLYESTER RESINS Sirca SPA SIR lndustriale

309

See over for H5 to H12

301

H5

UNSATURATED POLYESTERS FOR BUTTON MANUFACTURE Ashland Chemical Hispania Cray Valley DSMoBASF Structural Resins Jiangyin Carbec Synthetic Chemicals Co Ltd Jotun Polymer AS (See note prior to resin descriptions) Lonza SPA Neste Polyester Resisa Singapore Highpolymer Chemical Products Pte Ltd Sirca SPA SIR lndustriale Vianova Resins AG

H6

313

314

315

LOW PROFILE ADDITIVES Ashland Chemical Company Inc BIP Ltd Cray Valley lnterplastic Corporation SIR lndustriale Swancor Industrial Company Limited Vianova Resins AG

H9

312

UNSATURATED POLYESTERS FOR PAPER IMPREGNATION Lonza SPA

H8

311

UNSATURATED POLYESTERS FOR FOAMING Blagden Manufactured Chemicals Jotun Polymer AS (See note prior to resin descriptions) Resinous Chemicals Ltd Vianova Resins AG

H7

Page 307 310

315 316 317

PRINT BARRIERS Gwil Industries Inc Polydyne Inc

318

H I 0 THICKENING & THIXOTROPIC AGENTS & PASTES Ashland Chemical Company Inc Vianova Resins AG

318

H I 1 SURFACE & OTHER COATINGS - e.g. For tooling Ferro (Holland) B V Hawk International Distributors Ltd lnterplastic Corporation

318 319

H I 2 FLOORING RESINS lnterplastic Corporation Swancor Industrial Company Ltd

302

319 320

- DSMOBASFStructural Resins

HI

FLEXlBlLlSlNG RESINS

Formerly Si& SA

- Sociedad ltalo Espanola De Resinas S A

FSS7

An unaccelerated, specially formulated resin for use as a flexibiliser.

I aj

11 b /

70%

11 c i

800mPa.s

11 d [

25

11 e;

25/25

11 f f

10

I

11 f j

10

1

FS-59

An unaccelerated adipic acid based resin for use as a flexibiliser.

I

ai

11 bi

75%

11 c i

6OOmPa.s

11 di

25

11 e:

15/25

IS-0842 An unaccelerated isophthalic resin for use as a flexibiliser.

Beetle 8797 Non-accelerated, non-thixotropic, high viscosity resin which can be employed as a flexibilising additive to rigid resin types.

Palatal E200 An unaccelerated, low reactive, novolak adipic acid based resin for use as a flexibiliser.

Palatal E220 An unaccelerated, low reactive, orthophthalic resin for use as a flexibiliser.

Palatal E231 An unaccelerated, low reactive, unsaturated polyester for use as a flexibiliser. ai .. J i

11 b j 67% 11 c j 180 Id f I] k f l l t i 7 umi

Ief

nj 44%

Bfj oi

B si.

Pi

Ihi

jii

1 hj

11 i i

u si

u ri

Palatal E250 An unaccelerated, low reactive, orthophthalic resin for use as a flexibiliser. a. j.

J i

11 bi 11 k i

70% 60

11 c i 11 I f

650

55

11 d f 1 r?j

2.15

1 ej 11 nj

4.4-12

11 f j 11 oi

u siPi

u q!

1r i 303

Databook - Section H I :Flexibilising Resins

Silmar SIL 0566465 A fillable, fast gel and cure, dark colour full flexible, blending resin containing wax. c. 525

SIL 0566-1 114 SIL 0566-1 140

e. 8/25

An accelerated, high elongation variant of SIL 05BB-465, containing wax. Similar to SIL 05BB-1114 but offering only medium elongation.

Silmar SIL 17BA-628 An accelerated, very low colour, no wax, full flexible, blending resin. c. 500 Silmar SIL 17DA-384 An unaccelerated, semi-flexible blending resin. c. 1300

e. 11/25

e. 17/25

Silmar SIL 17DA-712 An unaccelerated, very light colour, full flexible blending resin, although not compatible with some NPG based resins. c. 1250 e. 2/25

SIL 1708-900

A low viscosity variant of SIL 17DA-712. c. 250

e. 7/25

-

Fuli 182 Plastication Resin

Fuli - 183 Plastication Resin ai j j

[[

b: 0.15%

63-69% 11 c i 0.77-1.43 11 k ( 80 11 I i

11 d j 11 mi

19-27

11 ei 11 n;

11 f i

5-10/25 3% 11

0;

11 g;

u Pi

35

[I

hi II 4 ;

[I i i

55Oc

[[ r i

Shortly before going to press, the company was acquired by Reichhold Chemicals Inc. Changes to Jotun manufacturing units, name, distrbution or other arrangements, and with regard to possible alterations in the respective resins supplied, have not been advised. NorDol 470-000 A highly flexible, orthophthalic base resin, for blending into other more rigid systems.

I

ai

11

b i 68%

11

c i 450-600 11 di

~ 2 111 ei 25-35/23

I

NorDol 750-000 A highly flexible isophthalic base resin specifically designed for blending into other rigid isophthalic systems.

[

ai

750-500 :

304

11 bi

69%

[[ c i

500-650

I]

d f e16

11 e ;

6-10423

I

A high reactive, amine accelerated, flexible, isophthalic resin for blending with rigid resins in the manufacture of putty pastes. e 6-10123 n 6.5%

- SIR lndustriale

S 703

A highly flexible resin.

Resipol 9404 Pure adipic acid to improve the flexibility of rigid resins.

I af

11 b f

67-70%

11 c f

11 e f

di

600-700

7,-9/25

I

ResiDol 9412 A specially formulated resin to improve the flexibility of orthophthalic polyesters.

Resipol 9424 A specially formulated resin to improve the flexibility of isophthalic polyesters.

I aj

1 bf

68-71%

11 c f

800-1100

11 e f

1df

12-18/25

]

Crestomer 1080 A urethane acrylate, non-thixotropic styrenated resin to provide significant improvement in the flexibility and abrasion, impact and crack resistance of filled and unfilled unsaturated polyester resins. a f 1.04

..

J i

11 b f

60%

11 k f

1 ci 11 I f

1df 25

mf

11 e f 11 ni

50125 11 f i 110% 11 o f

I s.f

n Pi

1hf

u

5.5% q!

1i f

23OC

u ri

HPR P104 A general purpose, very flexible isophthalic resin. Can be blended with other resins to reduce their rigidity.

Sirester FG 0819 An unaccelerated, flexible orthophthalic, offering very high elongation and suitable for blending.

I ai

11 b j

64%

11 c i

450mPas

u dj

15

1 e!

15/25

I

continued:

305

Databook - Section H2 :For Laminating Glass SIR lndustriale - continued: Sirester IS 0842 An unaccelerated, flexibilised isophthalic with a very high elongation, suitable for blending.

]I b!

ai

.:

62%

11 k f

11 ci 6OOmPas 1 d ! 1 II 11 mi

15

11 e ! 11 n i

10/25 85% 11 o i

11 f i

6

11 gi II Pi

1 hi

u 4i

1ii 11 r i

1

Viapal F 120E A low reactivity, medium viscosity, high strain to break orthophthalic suitable for flexibilising button resins. b. 70% C. 740-1010 Viapal F 140 A low reactivity, medium viscosity, orthophthalic offering excellent strain at break. b. 70%

c. 440-680

Viapal F 185E A low reactivity, medium viscosity, high strain at break isophthalic, suitable for flexibilising rigid chemical resistant isophthalics and iso/NPG resins. b. 70% c. 1000-1300 Viapal F 195E A low reactivity, low viscosity, bisphenol-A resin offering excellent strain at break and for use in impact resistant gelcoats and chemically resistant systems. b. 70% c. 460-830

H2

FOR LAMINATING GLASS

Glasurie A two-part polyurethane adhesive offering fast cure with ease of handling and dispensing.

2020 (XW 396/XW 397)

A clear glass bonding adhesive.

Shortly before going to press, the company was acquired by Reichhold Chemicals Inc. Changes to Jotun -manufacturing units, name, distrbution or other arrangements, and with regard to possible alterations in the respective resins supplied, have not been advised. Norpol 478-000 A very flexible, UV stabilised orthophthalic base resin especially developed for laminated glass applications. Styrene has to be added before use.

478-610 : 306

A preaccelerated, and styrene diluted version of 478-000.

- Hawk InternationalDistributors Limited Noraol 479-000 A very flexible orthophthalic base resin especially developed for laminated glass applications. 11 hj 11 e! 45-55/23..)] f / 11 bi 60% 11 c i 300-400 11 di 91. a! .. 1 kj 1 I i 2 11 m i 11 n; 350% [ o i Ii Pi II 4f

N

j j

1r j

A preaccelerated, and styrene diluted version of 479-000. Offers enhanced toughness and flexibility compared to 478-610.

479-610 :

PRIMERS

H3

-

Ultra 1 SP Sandable Contains a high level of NPG, and offering an ideal easy-to-sand surface for all secondary finishing operations, butalso highly suitable for RTM manufacturing techniques.

I ai

1.08-1.38

1 bi

1 ci

2300-2900

11 d j

11 e!

I

8-12/25

Duratec Surfacina Primer 707-002 A high quality polyester primer pigmented grey, providing outstanding filler and levelling properties. Offers a rapid coat build-up for plugs and master moulding surfaces, sands and polishes easily.

I ai

1.3

1 b!

11 ci

2700

11 dj

11 e;

20-25/25

Duratec Sandina Primer 707-007 A high quality polyester primer pigmented grey, providing outstanding filling and levelling properties and designed for rapid build-up and incredibly fast sanding.

[ ai

1.3

11 b (

I] c j

2700

11 d /

11 e!

20-25/25

1

Durabuild Base Primer A polyester base primer which can be applied by spray, brush or roller, allowing significant wet-on-wet buildup (1 4mm max.), and which can be readily sanded and shaped.

-

I ai

11 b!

11 c j

22OOCPS

dj

11 e!

14.5124

I si

1f

1 hi

N i!

125%

I

Durabuild Surface Primer A polyester surface primer providing outstanding filling and levelling properties on a variety of materials, which offers a rapid, easily sanded coat build-up for plugs and master mouldind surfacing that buffs and polishes beautifully. Standard colours are grey, white and black.

I ai

11 b i

11 c i

13,500CPS

11 d!

11 e;

20-25/25

II g!

11 f i

11 h i

[it

Durabuild Vinvl Ester Primer 005 A easily sanded, porosity-free, high build (2mm mx. wet-on-wet) primer, designed for the repair of osmosis

and blister damage on composite surfaces. Excellent adhesion to composites manufactured of vinyl ester, polyester and most epoxies. Suitable for RTM, vacuum forming and contact moulds.

I ai

11 b i

[ c j 2300-26OOCPS 1 dj

11 e!

18-22/25

I 307

Databook - Section H3 :Primers

1JQTUN POLYMER AS I ~

~~

Shortly before going to press, the company was acquired by Reichhold Chemicals Inc. Changes to Jotun manufacturing units, name, distrbution or other arrangements, and with regard to possible alterations in the respective resins supplied, have not been advised.

Norpol GP An orthophthalic gelcoat primer of mild weather resistance and available in different viscosity (GSF; HIS and GPE-S) as required for building/construction and transportation/communicationapplication.

578489001 A black, conductive primer gelcoat formulated for spray application to accept the electrostatic application of paints, enamels, lacquers, polyester and epoxy coatings/finishes.

I a!

11 b !

1.12-1.15

11 ci

1800-2200

11 d j

11 ej

12-18/25

I

5784E90019

A low VOC primer gelcoat, pigmented grey made from a unique blend of resins and fillers, that will accept paints, enamels, lacquers, polyester and epoxy coatings and finishes. Offers resistance to cracking and enhanced flexibility.

I a;

11 b!

1.3

1 ci

2200-2600

11 di

1 e;

10-12/25

I

IMPACT RTM 5788E90003 A grey low porosity primer based on a new proprietary polymer, designed to provide fast part production and toughness for elevated temperature RTM moulding and giving a greatly enhanced surface profile. Will accept paints, enamels, lacquers, polyester and epoxy coatings/finishes.

I ai

1 27-1 30

I] b i

11

~ 5 5 % ci 2000-2400

11 e:

11 dj

8-10/25

I

ISP SYSTEMS LIMITEC]~ SP Eposeal 300 An easy-to-use universal, low viscosity, quick drying and fast cure, epoxy primer, developed for timber but equally applicable to GRP and other composite surfaces, offering high adhesion and moisture resistance. SP Hibuild 302 A two-part, heavily filled but easily applied and sanded, solvent-based epoxy undercoat or primer, available in white or pale grey, specially formulated to assist the production of high quality paint finishes on timber, GRP and other composites surfaces, as well as metals and concrete.

Swancor CP-95 A vinyl ester based primer for lining concrete, offering strong adhesion, excellent chemical resistance and good interlaminar adhesion to a subsequent polyester or vinyl ester laminate.

I aj 308

11 bi

11 c i

100-300

11 dj

I(

e : 15-25/25

1

- Ashland Chemical Hispania Swancor SW-984M A preaccelerated elastomer modified vinyl ester based primer for metals, offering enhanced toughness, excellent adhesion and resistance to severe mechanical stress and a wide spectrum of chemicals.

H4

SATURATED POLYESTER RESINS

HPR G805 A styrene and monomer free resin suitable for adding dyes, in the manufacture of pigment pastes, and having excellent wettability to fillers and pigments.

HPR G820 A styrene and monomer free resin suitable for adding dyes, in the manufacture of pigment pastes, and having excellent wettability to fillers and pigments.

I ai

11 c !

11 bi

1.12

2500

11 d!

c25

I

Sirester FSG 583 An unaccelerated, saturated resin.

1 ai H5

1 bi

11 c !

2500mPas

dj 20

I

UNSATURATED POLYESTERS FOR BUTTON MANUFACTURE

Formerly Sier S A

- Sociedad ltalo Espanola De Resinas S A

FSB-6041 An unaccelerated, semi-flexible orthophthalic for button manufacture by sheet or bar.

FSB-6042 A flexible adipic acid based resin for button manufacture by sheet or bar.

I ai

11 bj

75%

11 c !

6OOmPa.s

11 di

25

11 e:

10125

11 f i

8

1

FSB-6044 An unaccelerated, semi-flexible orthophthalic for button manufacture by sheet or bar.

continued:

309

Databook - Section H5 :Unsaturated Polyesters For Button Manufacture Ashland Chemical Hispania - continued: FSB-6046 An unaccelerated, semi-rigid orthophthalic for button manufacture by bar.

Svnolac 6336.004 An unaccelerated, medium reactive, non-thixotropic orthophthalic for the centrifugal casting of sheet in the manufacture of button blanks.

Palatal K700 An unaccelerated, non-thixotropic, high reactive, orthophthalic resin for artificial jewel and button manufacture .

An inhibited version for tropical application.

K700N

Palatal K710 An unaccelerated, non-thixotropic, high reactive, orthophthalic resin for button manufacture.

K71OU K71OT K710TU

An LSE version. A thixotropic version. A thixotropic and LSE version.

Svnolite 0703-N-1 An unaccelerated, non-thixotropic, orthophthalic resin for button manufacture.

I ai

Fuli

1.12

-

11 b i

66%

11 c i

6.5-7.5dP/25

888M Button Resin

11 di

14-21

11 e:

5/25

(1 f j

II gi

11 hi

11 i i

85OC

I

- Neste Polyester Fuli

-

8883 Button Resin

Fuli

-

888TS Button Resin

Shortly before going t o press, the company was acquired by Reichhold Chemicals Inc. Changes to Jotun manufacturing units, name, distrbution or other arrangements, and with regard to possible alterations in the respective resins supplied, have not been advised. Nom01 342-057 A partly accelerated, low reactivity, UV stabilised, orthophthalic resin for button manufacture by the sheet casting process. More accelerator must be added to achieve adequate cure.

Norrool 381-281 An unaccelerated, thixotropic, medium reactive, resilient, modified isophthalic base resin for the manufacture of buttons by the rod casting process.

Distitron 316 T An unaccelerated orthophthalic resin specifically designed for the manufacture of buttons by the rod casting process. Offers long-term sliding ability.

Distitron 416 BIV16 An unaccelerated, orthophthalic resin offering good workability and very good transparency in the manufacture by centrifugal casting, of buttons.

I ai

11 bi

73%

11 ci

1600

1 df

11 et

ll si

11 f f

11 hi

ii

62OC

]

Distitron 416 L1T I 00 A thixotropic orthophthalic resin offering good workability and very good transparency, designed for the manufacture of buttons by the rod casting process.

-

S 253 An unaccelerated orthophthalic for button manufacture.

I ai

11 bi

68%

u Ci

900

df

11 e;

20/23

11 f f

II si

1 h/

i

i 5 8 0 ~] 31 1

Databook - Section H5 :Unsaturated Polyesters For Button Manufacture

ResiRol 9235 An unaccelerated orthophthalic resin formulated for the manufacture of buttons by bar casting.

.. J i

Pi

It 41

11 r i

Resipol 9243 An unaccelerated orthophthalic resin offering very good transparency in the manufacture of buttons by centrifugal casting.

Resipol 9244 An unaccelerated semi-rigid orthophthalic resin for the bar casting of buttons.

ResiRol 9245 An unaccelerated high viscosity semi-rigid orthophthalic resin for the bar casting of buttons.

287FN An orthophthalic resin offering good pigmenting properties, colour stability and excellent machinability and e. 4 - 6/30 flexibility immediately after cure, to facilitate clean punching of the buttons. c. 6 - 9

HPR BlOlTF An orthophthalic sufficiently flexible to permit excellent workability in the manufacture of buttons by the rod or bar casting method. Additions of Sirca's HPR PI04 (see HI) increases the flexibility.

HPR B145TF An orthophthalic sufficiently flexible to permit excellent workability in the manufacture of buttons by the rod or bar casting method. Additions of Sirca's HPR PI04 (see H I ) increases the flexibility.

312

- Vianova Resins AG HPR B166TF An orthophthalic sufficiently flexible to permit excellent workability in the manufacture of buttons by the rod or bar casting method. Additions of Sirca’s HPR PI04 (see H I ) increases the flexibility. ai 1.11

..

11 bj

Ii

69% 1 c i 10000mPas 11 d f 25 80 1 I ! 50 11 mi 3.2

11 k i

11 e; 11 ni

8/25 1f i 2% 11 oi

7

1gf

II P i

35

11 hi

7%

I 4i

1 i i 6OoC 11 r i

HPR B170 An orthophthalic sufficiently flexible to permit excellent workability in the manufacture of buttons by the sheet casting method. Additions of Sirca’s HPR PI04 (see HI) increases the flexibility.

Sirester FSB 0803lF An unaccelerated, flexibilised orthophthalic resin for sheets and rods in the manufacture of buttons.

Sirester FSB 0834/B1 An unaccelerated, medium reactive, high viscosity orthophthalic resin for the rod manufacture of buttons.

Sirester FSB 0834lF An unaccelerated, flexibilised medium reactive orthophthalic resin for sheets and rods in the manufacture of

FSB 0834/FT A thixotropic version of FSB 0834/F for the rod manufacture of buttons.

Siresfer FSB 0879lFT An unaccelerated, flexible thixotropic orthophthalic resin for the rod manufacture of buttons.

Viapal VUP 4587T A low reactivity, high viscosity, thixotropic orthophthalic for the manufacture of buttons by the rod casting method. Rods can be processed by heating at 8OoC for 2 hours and then cutting, even after long-term storage. b. 65% Viapal VUP 4599 A medium reactive, very bright colour, optically brightened high viscosity orthophthalic offering a short gel time and rapid hardness development in the manufacture of button sheets by the centrifugal casting method. C. 1350 1700 b. 67%

-

continued:

313

-

Databook Section H6 :Unsaturated Polyesters For Foaming Vianova Resins AG - continued: Viapal 4654E A very high viscosity, medium reactive, optically brightened resin of very bright c lour suitable for bui on manufacture by the sheet centrifugal casting method. Very suitable for multi-colour and stripped buttons. Full hardness development slower than for VUP 4599. b. 70.5% c. 2240 - 2750

H6

UNSATURATED POLYESTERS FOR FOAMING

Shortly before going t o press, the company was acquired by Reichhold Chemicals Inc. Changes t o Jotun manufacturing units, name, distrbution or other arrangements, and with regard t o possible alterations in the respective resins supplied, have not been advised.

Wresipol 31454 A specially formulated preaccelerated resin to provide good foaming properties through MBF units.

I ai

11 b i

11 c j

O.6Pa.s

11 dj

11 e i

5/25

I

Viapal VUP 4688BT A pre-accelerated, high viscosity, high reactivity, thixotropic orthophthalic resin formulated for chemical foaming and suitable for fibre-resin-spray, injection and cold-press moulding techniques. b. 66%

314

- Ashland Chemical Company Inc

Distitron 451 An unaccelerated orthophthalic resin of good transparency and flexibility for the continuous impregnation of paper.

I ai H8

[ bj 65%

Ic!

600

I dj

11 e ;

n si

IIf!

1 hi

1i i

550~

J

LOW PROFILE ADDITIVES

Arotech 2002 A low shrink, chemically thickenable, low profile additive containing vinyl ester resin and for use in maximum shrink control for SMC and BMC applications. Offers high heat resistance and high tensile elongation.

ai

.:

1.1

11 b: 62Oh 11 c! 2000 11 d: 31 1 e : 11 mi 11 n i 11 k ( !It

[ f ! 1.5

11

207

1 gi

I

100

1 hi 11 i

1 i ! 138OC 11 r ! 1.6%

13.1

Arorool 59036 A black, B-side thickening dispersion being a neutral blend in styrene of thermoset and thermoplastic carrier resins and magnesium oxide.

I af

1.11

11 bi

51.5%

1 ci

]

5650

Aropol 590798 A B-side resin for thickening SMC, offering good-to-excellent surafce quality.

LP 40A A thermoplastic modifier in styrene offering excellent shrinkage control, superior surface quality and a broad processing latitude, formulated for use in SMC, BMC, wet moulding and pultrusion applications.

I ai

1.00

11 bi

40%

11 c i 5000 11 di

2.5

I

-

LP 85 A thermoplastic modifier in styrene offering excellent shrinkage control and superior surface quality, developed for those applications where chemical thickening is both unnecessary and undesirable. Formulated for use as a B-side carrier in SMC systems, but also effective in wet-moulding and pultrusion.

I ai

1.00

bj 33%

1c i

600

]

2300

I

LP 90

Identical description to LP 85

I a!

1.01

11 bi

40%

11 c f

LP 4016 Identical description to LP85

315

Databook - Section H8 :Low Profile Additives

Beetle 8910 A solution of polyvinyl acetate in styrene for use as a low profile additive in polyester moulding compounds. b 50% Beetle 8911 A solution of polystyrene in styrene for use as a low profile additive in polyester moulding compounds. b 33%

Norsodyne A151 A low shrink additive. ai

11 bj

30%

ci

30dPaS

1

Norsodyne A I 54 A low profile, low shrink additive suitable for moulding compound manufacture and pultrusion.

Norsodyne A I 58 A low profile, low shrink, maturing additive suitable for moulding compound manufacture and pultrusion.

Silmar SIL 2OLP-846 A non-thickenable, low profile additive. c. 2500

Shortly before going to press, the company was acquired by Reichhold Chemicals Inc. Changes to Jotun manufacturing units, name, distrbution or other arrangements, and with regard to possible alterations in the respective resins supplied, have not been advised.

9880 An acid modified polyvinylacetate solution in styrene, suitable for SMC applications. Thickenable. b 40% c 3000-5000

9884 A polyvinylacetate solution in styrene for BMC applications. b 40% c 1300-1700 9885 -

A polyvinylacetate solution in styrene for pultrusion applications. b 30% c 700-1200

9886 A methyl methacrylate/styrene co-polymer solution in styrene for pultrusion applications. b 30% c 1350-1550

316

- Vianova Resins AG

Sirester A 787 A low shrink additive based on PS.

I ai

1 bi

30%

11 c i

2200mPas

]

Sirester A 792 A PVAM-based low-profile additive specific for BMC.

1 a!

bj

40%

1 c!

1000mPas

I

Sirester A 796 A PVAM-based, low-profile additive developed for SMC. ai

11 bi

35%

N ci

1700mPas

1

Sirester A 804 A PSM-based low-shrink additive for SMC & BMC, having high compatibility with PS.

I ai

I bj

33%

1 ct

3400

1

Swancor 7310 PS type Swancor 7311 PS-Acrylic co-polymer Swancor 7320 Acrylic type Swancor 7360 PS-PVAC copolymer Swancor 7410 PVAC type

Additol VXT 4903 A free flowing opaque paste-like solution of thermoplastic polymers in styrene for low-shrink application (SMC, BMC and pultrusion) in high reactive resin systems. Additol VXT 4956 A clear, yellowish solution of thermoplastic polymers in styrene for general purpose, low-shrink property use. Additol VXT 5923 A white, free flowing paste-like solution or dispersion of thermoplastic polymers and fillers for low-shrink application in highly reactive fire retardant, SMCIBMC and pultrusion resin systems.

317

Databook - Section H9 :Print Barriers

H9

PRINT BARRIERS

Four basic resins which minimise pre-release and print through of glass reinforcement to the gelcoat surface. c. c. c. c.

W-2201102 W-2207108 W-2241142 W-2251152

380-48Ocps 400-5OOcps 450-5OOcps 300-4OOcps

e. e. e. e.

30-40/21 25-45/21 28-35/21 20-26/21

125-0022 Dvna-Shield A spray applied print barrier either directly on to the gelcoat or employed as a resin for chop spraying the skin-coat on a component.

H I 0 THICKENING & THIXOTROPIC AGENTS & PASTES

Arorool ModM A B-side resin formulated for use in colour-neutral applications and designed to consistently thicken SMC without affecting shrinkage/expansionas the levels change.

Aropol 59036 A black B-side shrink neutral blend of thermoset and thermoplastic carrier resins and magnesium oxide, for SMC and BMC applications.

I a/

1.11

11

b j 51.5%

11 c f

5650

1

Viaroal VUP 4660E A medium reactive, thixotropic paste based on a general purpose orthophthalic resin for adding to UPR's. b. 63%

H I 1 SURFACE & OTHER COATINGS

Comerclad 70PA Can be applied either in-mould or to a finished hull construction to provide very high resistance to the growth of marine barnacles.

318

- Interplastic Corporation

Durabuild 800A Clear Sealer A low viscosity, rapid curing, penetrating polyester sealer for GRP surfaces and formulated for application by spray, brush or roller. Acts as an ‘anchor’ to bond urethanes, polyesters, vinyl esters and most epoxies to difficult to adhere to surfaces.

[ ai

11 bi

1 c!

5OCPS

1 d;

1 8;

8-10/25

1

Durabuild Crystal Clear Hi-Gloss Coatinq A special blend of polyester polymers of excellent clarity, colour and light stability which can be spray applied, alone or added to gelcoat for repairs or to upgrade a tooling gel coat.

Durabuild EBC Epoxv Bond-Cote A special blend of polymers applied to bond polyester resins and coatings to epoxy resins and coatings. Applied by spray, brush or roller. Also excellent as an air-cure coating for corrosion-resistant, air-inhibited systems.

Durabuild Tint Base Hi-Gloss Coatinq A pigment free coating, designed to accept unsaturated polyester pigment dispersions for colour matching requirements, otherwise as Durabuild Pigmented Hi-Gloss Coatings, as below. [ai

Ibj

I ci

4OOCPS

1 dj

1 e!

16-18/25

]

Durabuild Piamented Hi-Gloss Coatinas A special blend of polymers that provide a non-wax, tack-free high gloss surface offering colour and light stability, chemical resistance and high impact resistance. Available as standard in orange and black. Other colours may be obtained using appropriate polyester pigment pastes with Ourabuild Clear Tint Base Hi-Gloss Coating.

[ ai

1b/

1 C/

500-7OOCPS

1 dj

1 e!

20-30/25

1

Silmar SIL IZDA-833J An unaccelerated, non air-inhibited, high impact and gloss, coating. An excellent ‘tack-free’ additive. e. 5/25 c. 1100

H I 2 FLOORING RESINS

Silmar SIL65BQ-249 An orthophthalic resin stated to be suitable for floorings. c. 425 SIL65BQ-249A SIL65BQ-250 SIL65BQ-250A

e. 13/25

A UV stabilised variant of SIL65BQ-249. A waxed variant of SIL65BQ-249. USDA approved. A UV stabilised variant of SIL65BQ-250.

319

Databook - Section H 12 :Flooring Resins

Swancor 6110 An epoxy based, dustfree coating. Swancor 6120 An epoxy based, self-levelling screed. Swancor 6130 An epoxy based nonslip screed. Swancor 6140 An epoxy based mortar screed. Swancor 6150 An epoxy based laminated lining resin. Swancor 6160 An epoxy based anti-static coating. Swancor 6910 A vinyl ester resin for coatings containing glass flake. Swancor 6920 A vinyl ester based laminated lining resin. Swancor 6930 A vinyl ester based mortar screed.

320

LATE ENTRIES Page

A

ADHESIVES Cytec Engineered Materials Gougeon Brothers Inc ITW Plexus Lord Corporation YLA Inc

C

323 324 325

GELCOATS & IN-MOULD COATINGS C3 SMOOTHING COATS (PHENOLIC COMPOSITES) Cray Valley

326

C4 TOOLING, PRODUCT REPAIR (PHENOLIC COMPOSITES) Polygard 326 C5 UNSATURATEDPOLYESTERBASED Alusuisse ltalia Polygard Inc

D

326 327

MATRIX RESINS FOR LAMINATING & ASSOCIATED PURPOSES D2 BISMALEMIDE BASED YLA Inc D3 BISPHENOL-A, EPOXIDE, VINYL & CYNATE ESTER & FUMARIC ACID BASED Alusuisse ltalia Ciba Specialty Chemicals Gougeon Brothers Inc YLA Inc D6 PHENOLIC BASED Borden Inc Cray Valley YLA Inc D8 UNSATURATED POLYESTER BASED Alusuisse ltalia Polygard Saudi Industrial Resins Limited D9 POLYIMIDE BASED RESINS I S T (MA) Corporation

327

327 328

329 330 331 331 332

333

See over for E to H

321

Page

E

POLYMER CONCRETE, CULTURED MARBLE, ONYX & ASSOCIATED FILLED APPLICATIONS Alusuisse ltalia

F

333

FORMULATED SURFACING PASTES, PUTTIES & FILLER PASTES Diab Group Polygard

G

334

-

-

UNSATURATED POLYESTER OR OTHER SYSTEMS FOR : G2 CASTING, ENCAPSULATING EL DECORATIVE WARE Alusuisse ltalia Cytec Engineered Materials Inc G5 PUTTY & FILLER PASTE MANUFACTURE Alusuisse ltalia

H

335

335

G6 SMC/BMC MANUFACTURE Alusuisse ltalia DSMoBASF Structural Resins

336

G8 UNCLASSIFIED USE Bryte Technologies Landec Corporation

337 338

SUNDRY APPLICATIONS H I FLEXlBlLlSlNG RESINS Alusuisse ltalia

338

H5 UNSATURATED POLYESTERS FOR BUTTON MANUFACTURE Alusuisse ltalia 338 H7 UNSATURATED POLYESTERS FOR PAPER IMPREGNATION Alusuisse ltalia 338 H8 LOW PROFILE MODIFIERS DSMoBASF Structural Resins

322

339

- Adhesives :Cyfec Engineered Materials

LATE ENTRIES The following information was received too late to include in the preceding pages, other than a listing in the Comprehensive Reference Index. In the same way, where contact details for the company have not been listed in Part One, Directory, then they are shown directly under the company heading.

A

ADHESIVES

The following systems are listed. As only outline details are provided, particular care must be taken in their final selection, in conjunction with the manufacturer. BR 450-7 BR 495 FM 10 FM FM FM FM

12 27 32 50

FM 55 FM 57 FM 61 FM 73 FM 87-1 FM FM FM FM

94 123-2 & 123-5 235 275

FM 300 FM 300-2 FM 350NA FM 355 FM 377 FM 400NA FM 404NA FM 410 8,410-1 FM 490A FM 680-1

A modified bismaleimide foam adhesive which co-cures with most bismaleimide prepregs. An extrudable modified epoxy paste, closed cell foam curable at 121OC & 177OC. A modified epoxy, syntatic foam adhesive designed to replace honeycomb core in the manufacture of thin, lightweight panels. Co-cures with most 177OC prepregs. Similar to the above, also co-cures with 121OC prepregs. A high expansion, low density, modified epoxy, splice foaming adhesive. A radar transparent oxyimide adhesive offering 177OC, dryhet performance. A MDA free condensation polyimide, high temperature core splice, foam adhesive for polyimide structures. An addition cure polyimide, MDA-free, PMR-15 based adhesive for continuous 26OOC service. A condensation polyimide, MDA-free adhesive suitable for honeycomb and wide area bonding. A duplex nitrile epoxy 177OC cure adhesive offering an elevated service temperature with excellent sandwich peel properties. A modified 121OC cure and toughened epoxy, general purpose and aerospace adhesive. A state-of-the-art, dual cure (121 177OC) modified epoxy 121OC service temperature film adhesive, particularly suitable for Nomex bonding. A higher service temperature version of FM 73. A modified epoxy film adhesive. Standard cure is 121OC , but 93% is possible. A dual cure (121 177OC) repair adhesive for high service temperature use. A dual cure (121 177OC) repair film adhesive allowing ambient temperature storage. A nitrile epoxy 177OC cure adhesive offering excellent surfacing characteristics. A dual cure (121 - 177OC) film adhesive for both co-cured and secondaly composites bonding. A 177OC cure, non-asbestos structural adhesive for continuous use at 177OC. A 177OC cure film adhesive for composite co-cures and 216OC service temperature. A 177OC cure flow-controlled adhesive offering excellent toughness and heat-age performance. A 177OC cure industrial standard structural adhesive for service at 216OC. A non-asbestos modified epoxy core splicing foam for use with FM 400 adhesive. A general purpose, non-asbestos, modified epoxy core splice adhesive curing at 121OC & 177OC. A general purpose, non-asbestos, modified epoxy, closed cell foam adhesive curing at 121OC & 177OC, which prevents water migration. A radar transparent condensation polyimide with a 371OC service temperature, cocurable with polyimide composites.

-

-

continued: 323

Databook - Late Entries

Cytec Engineered Materials Inc - continued: A radar transparent, condensation polyimide, core splice adhesive for 316OC applications. Co-curable at 177OC. A 177OC cure, polyimide epoxy, high peel strength adhesive. A high-density, low expansion modified epoxy foam for fuel barrier and wet wing applications. A 177OC cure phenolic-epoxy adhesive capable of withstanding 538OC for short periods. Higher peel strength, modified epoxy with superior shop life. A dual cure (121 177OC) adhesive providing an excellent balance between peel strength and elevated temperature performance. A 177OC curing modified epoxy, highly flow controlled foam adhesive for nacelle spectum and acoustical applications. Available in sheet form 15 60mls thick. A 177OC cure industry standard, composites bonding adhesive. A modified bismaleimide, industry standard film adhesive. A modified cyanate ester low dielectric and loss tangent film adhesive which cocures with most 177OC prepregs. A modified bismaleimide, low density core splice adhesive, radar transparent which co-cures with most bismalemide prepregs and offers a service temperature of 177°C. A low dielectric and loss tangent, cyanate ester foam for radome applications.

FM 680-2

HT 424 Metlbond 113 Metlbond I146

-

Metlbond 1305-1

-

Metlbond 1515 Metlbond 2550 Metlbond 2555 Metlbond 6604-1 Metlbond 6555-1

Pro-Set 175 Adhesive Bonds (plus a gap-filler), fibre-reinforced composites, plus wood, steel, aluminium and concrete. Available for use with 3 different hardener systems, 273, 275 and 277 offering different gel and cure time. Dual cartridge system eliminates measuring and mixing. Colour change denotes full cure.

In noting the userof the trade mark, Fiberglass Fusion, the USA headquarters also list the following adhesives as suitable for composites, that are not already described in the initial section A. MA 330

A grey pigmented version of MA310 for difficult to bond plastics.

MA422

An all purpose adhesive with a medium open time.

MA425

An all purpose adhesive with a long open time.

MA555

A low exotherm adhesive, pigmented blue or white and with a long open time that can be employed up to 1" thick.

Chemical Products Division Tel: +I 814 868 3611

2000W Grandview Blvd.

P 0 Box 10038

USA

Fax: + I 814 864 3390

The company make a large range of adhesive systems from which the following have been specifically selected as to their composites suitability. Lord 310 N B

A non-flammable epoxy, composite adhesive with a working time of 30 - 60 minutes.

Lord 3201322

An epoxy, composite adhesive with a working time of 10 - 20 minutes.

Lord 363 N B

A fast-set epoxy adhesive with a working time of 5 - 7 minutes.

324

- Adhesives :YLA Inc -

An acrylic adhesive for composite application offering a working time of 6 10 minutes and Lord 406117 fast room temperature bonding.

-

Lord 410/17

An acrylic adhesive for composite application offering a working time of 1 2 hours.

Lord 506/17 minutes.

An acrylic adhesive for open mould and wet lay-up application with a working time of 5 - 7

A white pigmented, fast set modified acrylic adhesive for composite application. Offers the Lord 660 highest impact and peel strengths available in a room temperature curing system.

-

Lord 7542 N B minutes.

A non-flammable, flexible, urethane adhesive for composites with a working time of 4 5

Lord 7542 N E

As for 7542 A/B but offering a longer working time 30 to 60 minutes.

-

Lord 7610 A one part, urethane sealantladhesive for composites application, offering a working time of 30 - 60 minutes.

A one part, cross-linking structural urethane adhesive for composites, applied by brush or Lord 7660 spray and offering a working time of 30 - 60 minutes. Lord CA Gel & Accelerator application.

2970 Bay Vista Court Tel: +I 707 747 2750

Benica

A gap filling, cyanoacrylate adhesive for non-structural composites

CA 94510

USA

Fax: +I 707 747 2754

The following systems are listed. Microolv Svntatic Film Svstems

SF-1 SF-2 SF-3 SF-4 SF-5 SF-6

Micro&

12OOC cure low-smoke epoxy film 175OC cure, structural core epoxy film 95OC cure, latent toughened epoxy film, with SF3C being a 'commercial grade' variant 2OOOC cure, bismaleimide based film 175OC cure, polycyanate film 12OOC cure, toughened epoxy film, with two variants: SFdC a 'commercial grade' film, and SF-6N being a natural colour formulation.

ExDandina Svntatic Film Svstems EM-3

EMS EM-6

120OC cure expanding epoxy film, with EM3N being a natural colour formulation 23OOC cure, expanding polycyanate film 95OC cure, expanding core splice epoxy film

Film Adhesive Svstems RS-4

175OC cure, polycyanate film adhesive with two variants: RS-4A being a lower tack formulation RS4LT135OC cure formulation RS-15H 95OC cure epoxy film adhesive.

325

Databook - Late Entries

c

GELCOATS & IN-MOULD COATINGS C3

SMOOTHING COATS (PHENOLIC COMPOSITES)

Norsophen MC 315 Primer For Gelcoat Suitable for spray/projection lamination, hand-lay, RTM and hot-press. a. 1 .I8

b. 57%

c. 7dPas

Norsophen MC 400 Primer For Paint Finish Suitable for spray/projection lamination, hand-lay, RTM and hot-press. a. 1.38

b. 80%

c. 5500dPas

Norsophen MC 401 Primer For Paint Finish Suitable for spraylprojection lamination, hand-lay, RTM and hot-press. a. 1.38

b. 80%

c. 5500dPas

C4

TOOLING, PRODUCT REPAIR & ASSOCIATED

501 0 North Coolidge Avenue Tel: +I a13 a77 7591-

Tampa

Fax: +I a13 871 3467

850 Pickens Industrial Drive Marietta Tel:

+I 770 423 0280

Fax: +I 770 423 0292

FL 33614 USA Freephone, USAonly: 800 633 0362

GA 30062 USA Freephone, USA only: 800 842 7063

The company list one tooling gel coat available pigmented orange or black.

C5

UNSATURATED POLYESTER BASED

The company are part of the Alusuisse-Lonza Group and there is simularity therefore with certain of the thermoset resin systems manufactured and supplied by Lonza SPA. Where full, or respectable equivalence exists then the following Lonza tabulations can be employed. The same trade name, Distigel, applies to both companies. AI usuisse 3519L1S

Lonza

351 9A

The following additional resin applies.

Djstjfron 15 1 An unaccelerated isophthalic/NPG hand-lay gelcoat liner offering good flexibility and chemical resistance.

326

- Bisphenol-A, Epoxide, Vinyl & Cyanate Ester & Fumaric Acid Based :Ciba Specialty Chemicals

For contact details see C4 above. Although no other details are provided, the company list the following gelcoats. Interior Grade - In white, colours and high gloss. Exterior Grade - lsophthalic and NPG grades, clear, white and in a wide colour range. Cleargard for cultured marble. Metalflake - for marine application.

-

D

MATRIX RESINS FOR LAMINATING & ASSOCIATED PURPOSES D2

BlSMALElMlDE BASED

For contact details see A above.

Two systems are listed: RS-8

A 205OC cure system with RS-8HT offering a higher service temperature.

D3

BISPHENOL-A, EPOXIDE, VINYL & CYANATE ESTER & FUMARIC ACID BASED

The company are part of the Alusuisse-Lonza Group and there is simularity therefore with certain of the thermoset resin systems manufactured and supplied by Lonza SPA. Where full, or respectable equivalence exists then the following Lonza tabulation can be employed. The same trade name, Distitron, applies to both companies. Alusuisse 35608

Lonza 35608

Resinfusion 8601I8602 A two component, low viscosity epoxy system developed for resin transfer moulding. ai . . 1.12

11 b i

1 ki

55

1 c i 580cP I di 11 I i 38 1 mi

1.7

11 ei 132/25 11 f i u si 1 n f 30% 11 o i 558 1 p f

Laminate employs two layers QM 6408 50 glass cloth and was post cured.

424

1 hi 0.75% u i i I q ! 20.8 1 r i

1l0h

continued: 327

-

Dafabook Late Entries

Ciba Specialty Chemicals - continued:

1f;

si

u hi

uii

Pro-Set 117 Infusion Resin A very low viscosity epoxy specifically designed for infusion processes. Recommended for use with hardener Pro-Set 237 designed to be very slow.

Pi

1r i

qi

Pro-Set 125 A low viscosity epoxy ideal for working with thick fibre weaves and bundles, for use with hardeners Pro-Set 226 (medium speed), 229 (slow) or 237 (very slow). Can be blended with Pro-Set resin 145 see below.

-

11 c i 12OOcps 11 d! 11 I i 5 2 - 7 7 1 $

88-138

Properties related to hardener and post-cure condition.

1 ei 11 f i 11 ni 3.2 - 6.3% 11 0 1

II 9;,

11 hi

u q!

Pi

11 i i

50-87OC

11 r f

Pro-Set 135

An intermediate viscosity epoxy whose cure-time can be tailored by the choice of hardener, Pro-Set 226 (medium speed), 229 (slow) or 237 (very slow). ai .. Ji

1 b] 11 ki

11 c j 3OOOcps 80-146 1 I i 4 5 - 8 0

[I d i

11 mi

11 e j 11 ni

11 f ; 11 0 :

si

2.7-6.1%

Pi

Properties related to hardener and post-cure condition.

1 ill II qi

11 i i

50-91OC

11 r j

Pro-Set 145 A medium viscosity epoxy which is ideal for vertical draminn amlications where minimum drain-off is desired. Works weli with roller-type impregnation, although 'iis highe; viscosity makes hand wet-out slower. Recommended for use with Pro-Set hardeners, 226 (medium speed), 229 (slow) and 237 (very slow). Can be blended with Pro-Set 125. a/

.:

11 b f 11 k i

84-146

1 ci 11 I

69OOcps 45-80 1 mi

11 d!

11 e f 1 f! 1 n! 2.7-6.1% 11 o!

191

. Pi

I[ hi 1 i i 62- 100°C II qi 11 r i

Properties related to hardener and post-cure condition.

For contact details see D2 above. The company list the following epoxy resin systems, RS-1 RS-6 RS-7

328

95OC cure, latent toughened system 12OoC cure, low smoke, with RSdM being a lower temperature cure formulation 12OOC cure, latent toughened system, with RS-7C being a flow controlled formulation

- Phenolic Based :Borden Inc RS-11 RS-I 3 RS-17 RS-22 RS-23 RS-24 RS-25 RS-26

125 - 175OC cure system A low temperature 'snapcuring' system 135OC cure, low moisture absorbing system 120°C, high modulus system A fast cure, toughened system 135OC cure, epoxy tow prepreg resin 12OoC cure, high elongation/low moisture absorbing system 135OC cure, low dielectric system

and the following polycyanate resins 175OC, toughened system with these variants RS-36H - an electrostatic dissipation formulation RSSC - a controlled flow, vacuum bag/oven cure formulation RSSM - an extremely low flow, autoclave formulation RS-9 285OC service system, with RS-9C offering a controlled flow, toughened formulation RS-12 13OOC cure, toughened system, with these variants RS-126 - a low-tack formulation RS-12C - a controlled flow, vacuum bag/oven cure formulation RS-12D a low-tack, extremely low flow, autoclave formulation RS-12M - an extremely low flow, autoclave formulation RS-14 175OC cure, low viscosity system suitable for RTM RS-16 135OC cure, toughened system.

RS-3

-

D6

PHENOLIC BASED

610 Meidinger Tower

re/:

+7 502 587 7171

Louisville

KY 40202

USA

fax: +1 502 587 7119

The company advise the use of the trademark Durite and in addition to the availability of SC-1008 (see details as under the initial section D6), the following systems. Durite LV-3020 A modified heat reactive phenolic resole for application in industrial laminating and honeycomb constructions. This methanol solated varnish is used in various substrates: paper, cloth, glass, Nomex etc and provides improved toughness and rigidity.

I a(

I[ b (

59-63%

u ci

150-500 cps

1 di

11 e :

7-11/25

I

Durite SC-4096 A water borne, liquid phenolic resole developed to meet the stringent thermal and environmentally conditioned mechanical and physical properties required by MIL-R-9299C (GradeB). Suitable for a variety of prepreg/composite, honeycomb and other binder applications.

I aj

1 bi

67-73%

11 c:

200-3OOcps

I]

d/

11 e:, 15-21/135 I

Durite SC-8226 A low temperature latent acid hardener (RC-SOIA) curing, phenolic resole suitable for resin transfer moulding, filament winding, hand-lay, pultrusion and in the manufacture of syntactic foams.

I ai

11 b i

69-74%

11 c i

2700-3OOOcps

11 dj

I e!

7-13/80

I

continued: 329

Databook - Late Entries

Borden Inc - continued: Durite SC-030A A water borne, liquid phenolic resole developed to meet the stringent thermal and environmentally conditioned mechanical and physical properties required by MIL-R-9299C (Gradet)). Suitable for a variety of prepreg/composite, honeycomb and other binder applications.

I ai

1 b;

67-72%

1 c:

200-300 cps

11 d ;

1 e;

13-17/121

I

Durite SC-954A A water borne, heat reactive, liquid phenolic resole with unique flow and cure characteristics for use in a variety of prepreg/composite, honeycomb and other binder applications.

I ai

11 b i

72.5-76.5%

11 c i

1 - 1.5kcps

11 d !

1 e!

30-40/121

I

Durite SL-387A A modified phenolic resole resin with improved plasticity and toughness, and recommended for applications in the chemical environment. ai

11 b i

58-62%

11 c i

175-375cps

11 dj

1 e!

9-13/25

I

Durite SL-486A A heat-reactive water borne, liquid phenolic resole for use in a variety of prepreg/composite, honeycomb and other matrixlbinder applications. Meets MlL-R-9299C approval.

I a;

1 b.i 67.5-71.5% 11 C :

5 0 0 - 8 0 0 ~11 ~dj~

11 ei

10.5-13.5/25

I

Durite SL-575B A low temperature latent acid hardener (RC-901A) curing, phenolic resole suitable for resin transfer moulding, filament winding, hand-lay, pultrusion and in the manufacture of syntactic foams.

I ai

11 b i

71 -75%

1 cj

1.05-1.4kcps

1 dj

11 ej

11 f j

I sf

Ih i

1.4%

1i

I

Two component, pre-catalyzed, flame retardant, low smoke/low toxicity (High LC50, U-PITT test), phenol resorcinol matrix resins. Three grades are available, IOOOFM, 1030FM and 1060FM of different viscosity and solids content. All three systems are listed by Factory Mutual as 'Identified Components for the Manufacture of Fire or Smoke Exhaust Ducts". Durite Resorciahen 2074-A/2026-B A two component, non catalyzed, flame retardant, phenol-resorcinol resin highly recommended for pultrusion application.

Norsoahen 1203 Medium reactive, for pultrusion. a. 1.21

b. 71%

c. 9.3dPas

Norsoahen 1205 High reactivity, for spray/projection lamination, hand-lay, RTM, hot-press, filament winding and for the production of continuous sheeting. a. 1.23 b. 73% c. 9.3dPas NorsoRhen 1205T High reactivity, for spray/projection lamination and hand-lay. a. 1.23 Norsoahen 1209 High reactivity, for RTM, hot-press and pultrusion. a. 1.22

330

b. 78%

b. 74%

c. 35dPas

c. 19dPas

- Unsaturated Polyester Based :Alusuisse ltalia They list the following system catalysts. NorsoDhen C1650 Suitable for all fabrication techniques. NorsoDhen C3200 Not recommended for hand-lay and spraylprojection deposition, otherwise suitable.

For contact details see D2 above. One system is listed: RS-10 A 175OC temperature cure system

D8

UNSATURATED POLYESTER BASED

The company are part of the Alusuisse-Lonza Group and there is simularity therefore with certain of the thermoset resin systems manufactured and supplied by Lonza SPA. Where full, or respectable equivalence exists, then the following Lonza tabulations can be employed. The same trade name, Distitron, applies to both companies. Alusuisse 351BVI 3 414CV9 44 1 5142 1629EL5 1629NT 21182LZV7 Z184 5119NT 5119SX H484CV2.5

Lonza 351BVIO 414CV10 441S 5142 1629EL5 1629HT 21182\14 a231LS 5119NX 459sx H484

The following additional resins apply: Distitron 201 An unaccelerated, UV stabilised orthophtahlic for the continuous lamination of flat or corrugated sheets.

I ai

11 bi

64%

1 ci

600

di

1 ej

]I

f

I si

u hi

11 i i

85%

I

Distitron 21230 An unaccelerated, low styrene content resin for the manufacture of pipes and tanks, typically by filament winding.

I ai

11 bi

70%

11 c l

350

1 dj

ej

11 f

u 91

11 h i

11 i

I

IIOOC

Distitron 21234V42 An unaccelerated, low styrene content resin for the manufacture of tubular products by hand-lay, spraylprojection lamination and centrifgual casting.

I a;

11 bi

continued:

63%

11 c i

380

d:

1 e/

11 f :

I sl

1 hj

I]

i

950~

I

331

Databook - late Entries

-

Alusuisse ltalia continued: Distitron 2lLS An unaccelerated, low styrene content, low shrinkage resin for RTM fabrication.

I ai

11 b i

57%

11 ci

600

I

Distitron 2IRTM An unaccelerated, low styrene content resin for RTM fabrication.

I aj

11 b i

60%

11 cj

150

1 d!

u e!

11 f j

II gi

11 hi

11 i i

I

1220~

Distitron 1116CLV2 An unaccelerated, UV-stabilised orthophthalic offering very good translucency in the continuous lamination of flat and corrugated sheets.

Distitron 5003L An unaccelerated, orthophthalic resin for the centrifugal casting of poles.

I ai

11 b j

66%

11 c i

650

11 di

11 ei

11 f j

II 9!

u hi

1i !

950~

I

Distitron 511SESXZI A fast cure, preaccelerated, thixotropic, LSE, orthophthalic general purpose resin.

1 ai

11 b;

57%

11 ci

1700

]I d f

11 e:

11 f i

II si

11 hi

1i i

740~

I

11 f i

I g!

11 hi

1i

8OoC

I

I] f

II g !

hi

1i

9 5 0 ~I

Distitron H384 A low rigidity, halogenated, flame retardant resin for hand-lay.

I ai

11 b i

67%

11 ci

600

11 di

1 ei

Distitron H422 A low rigidity, halogenated, flame retardant resin for hand-lay.

I ai

11 b j

70%

11 ci

650

11 d i

1 ej

For contact details see C4 above. The company are distributors for Reichhold and McWhorter Technologies resin systems.

-

The company - owned it is understood by Ashland Chemical advise that they are in a position to supply the following. No further details were provided. lsophthalic gelcoats - clear and pigmented white Iso/NPG gelcoats clear and pigmented white General purpose orthophthalic resins Flexible isophthalics for pipe manufacture Rigid isophthalics for tanks Halogenated flame retardant resins Iso/NPG acrylic modified resins for solid surface Orthophtahlic resins for marble Vinyl esters Chlorendic polyesters Bisphenol-A fumarate polyesters

-

332

- Polymer Concrete, Cultured Marble, Onyx & Associated Filled Applications :Alusuisse ltalia

D9

POLYIMIDE BASED RESINS

730 Worcester Street Tei: +I 413 730 3578

P 0 Box 51029

Indian Orchard

MA 01151

USA

Fax: +l 413 730 3420

Skvbond 700.703.705 & 1888 A range of heat reactive aromatic resins which can be thermally cured to a cross-linked polyimide and all specifkally designed for structural and specialty applications where extended exposure at temperatures up to 375OC is required. N.B. Sales and marketing of these systems is through:

Summit - Precision Polymers Corporation One Parker Plaza Fort Lee N.J 07024 Tel: +I 201 585 0080 USA

E

fax: +I 201 585 9776

POLYMER CONCRETE, CULTURED MARBLE, ONYX & ASSOCIATED FILLED APPLICATIONS

The company are part of the Alusuisse-Lonza Group and there is simularity therefore with certain of the thermoset resin systems manufactured and supplied by Lonza SPA. Where full, or respectable equivalence exists then the following Lonza tabulations can be employed. The same trade name, Distjtron, applies to both companies. Alusuisse 2/STBV5 3559sv3

Lonza ZSTBV5 3559sv3

The following additional resin applies.

Distitron 417 An unaccelerated, orthophthalic, cold casting resin for cultured marble.

333

-

Databook Late Entries

t

FORMULATED SURFACING PASTES, PUTTIES & FILLER PASTES

315 Seahawk Drive Tel:

+I 972 228 7600

DeSoto

TX 75115

Fax: * I 972 228 2667

USA

hffpY!.diabgroup.com

The company list a range of core bedding putties for composite sandwich construction. Divilette 600 A blue pigmented polyester based bonding adhesive containing micospheres of plastic - a so-called syntatic foam. ai j

11 b i 80mg

11 k !

11 c i 35k-54k cps 11 d j 11 I i IO mi

I] e f 11

30-45/25 n f 2% 11 oi

u

f

i

II pi

u Pi

hi ~ 1 %i i II si 11 r i

600W A white pigmented variant. 600VE A natural off-white coloured vinyl ester based variant offering a higher tensile strength (I = 16.8), a higher elongation (n = 5%) and a lower shrinkage (h = ~ 0 . 5 % ) .

Divilette 650HV A white pigmented, polyester based bonding adhesive containing microspheres of plastic syntatic foam.

-

a so-called

K-Lite

A white pigmented, polyester based bonding adhesive containing microspheres of plastic - a so-called syntatic foam.

ProBond

A white pigmented, polyester based bonding adhesive containing microspheres of plastic and specifically designed for use with balsa cores.

11 b i

a;

j i

<5%

11 k i

1 ci

110k-130kcps 11 dj 13.8 ]I mf

1If

1 ei 1 nj

35-45/25 I% 11 o j

1f i

U pi

u PI

IIhi

II q i

1% I I i i

11 r i

For contact details see C4 above. The company list the following bonding pastes and putties. No other details are provided. Laminating: PG-8 Bonding PG-9 Bonding PG-4 Bonding Laminating & Void Filling: RMP 1 Bonding Laminating & Detail Work: Mould Putty Void & Tool Work: Pumpable: Flex Putty

8-PL Bonding

125B Bonding

Fire retardant, corrosion resistant and other speciality putties are available or can be developed for any particular application.

334

- Putty & Filler Paste Manufacture :Alusuisse ltalia

G

-

UNSATURATED POLYESTER - OR OTHER SYSTEMS FOR : G2

CASTING, ENCAPSULATION & DECORATIVE WARE

Distitron 5026A A light stabilised orthophthalic, transparent casting resin.

I a;

11 bj

66%

11 c !

650

11 d!

11 e f

11 f f

I si

]I hi

11 i :

900~

1

BR 450-4 A microballoon filled bismaleimide potting compound. BR 623&623P Pumpable modified epoxy potting pastes of low viscosity, low flammability and low smoke characteristics for co-curing with phenolics and epoxies. BR 624 A one-part, microballoon filled pottable epoxy for use in insert manufacture or the edge filling of honeycomb sandwich constructions. BR 626 A superior version of BR 624 demonstrating superior resistance to hot-wet exposure whilst developing a low exotherm during cure. BR 662 A one-part phenolic designed to be co-cured with phenolic laminates in the construction of interior panels and low density mouldings. Corfil 615 A two-part, microballoon filled epoxy potting compound for low-density mouldings, honeycomb inserts, edging and filler application.

G5

PUTTY & FILLER PASTE MANUFACTURE

The company are part of the Alusuisse-Lonza Group and there is simularity therefore with certain of the thermoset resin systems manufactured and supplied by Lonza SPA. Where full, or respectable equivalence exists then the following Lonza tabulations can be employed. The same trade name, Distitron, applies to both companies. Alusuisse

Lonza

821S 8228

8218 8228

continued:

335

Databook - Late Entries

Alusuisse ltalia - continued: The following additional resins apply. Distitron 811KV2O A preaccelerated, special resin for the manufacture of natural marble repair materials.

I ai

11 b ]

1 ci

74%

2000

11 d!

1 ei

11 f ;

II gi

hi

1fi

I si

11 hi

1i :

OIOOC

I

Distitron 1408 An isophthalic system for the manufacture of setting compounds.

I aj

)I b i

G6

11 c i

64%

1000

1 dj

11 e;

i f OIOOC

1

SMC/BMC MANUFACTURE

The company are part of the Alusuisse-Lonza Group and there is simularity therefore with certain of the thermoset resin systems manufactured and supplied by Lonza SPA. Where full, or respectable equivalence exists then the following Lonza tabulations can be employed. The same trade name, Distitron, applies to both companies. Alusuisse

Lonza

270s 423

270s 423

The following additional resins apply. Distitron 3584 A maleic acid based system for the manufacture of BMC & SMC.

I ai

11 b i

65%

]I

ci

1200

11 dj

11 ei

11 f j

I si

1 hi

11 i i

11 hi

i

2000~

Distitron 35852 A highly chemical resistant, isophthalic resin for the manufacture of BMC & SMC.

Atlac XP 810 A chemical resistant, bisphenol- A vinyl ester system.

-

Daron 11 102 A special, high temperature resistant system. ai 1.1 - 1.2 .. 1:

336

I[ b i 11 ki

61 -63%

90

11 I

1 ci

5.5-7.5dPas d! 1 3 - 1 7 11 mi 3.5 11 ni 1.5%

50

11 e ! 11 0 ;

11 f i II g i II Pi

qi

i

18OoC

11 r i

I

- Unclassified Use :Bryte Technologies Inc Svnolife 0020-N-2 A general purpose orthophthalic system offering a glossy moulded surface.

Svnolite 040-N-1 A general purpose orthophthalic system offering good mechanical properties. ai 1.05-1.15 . :

11 bi 11 k /

60-62% 11 c ! 4.8-5.9dPas 11 d! 130 If 65 11 mi 4.2

20-24 11 e ! 11 n f 2.4% 11 oi

11 f i

II Pi

II st

11 hi

i

/

11 r i

I4i

106OC

Synolife 0423-N-1 A Class A, pentyl-glycol/maleicsystem offering an excellent moulded surface finish.

11 b f 11 k i

aj 1.10- 1.15

..

64.2-66.5% 1 c j 10-12dPas 110 11 I i 55 11 i 3.4

11 d j 1 8 - 2 4 11 ei 1 nl 1.7% 1 o!

11 f i II P!

.I1 h i

IIsi

'

qi

1i i

145OC

rf

Svnolife 2273-X-1 A low-shrink orthophthalic system offering improved compatibility with LS additive. a! 1.1 - 1.25 1 b i 65.5 - 68.5% 11 ci 22 - 27dPas .. 11 ki 120 1 I 1 70 11 mi 3.7 J i

1 d/ 11 ni

16 - 21 11 el 2.4% 11 oi

11 f t II si I PI

hi

I41

11 i i

116OC

ri

Svnolife 6024-N-1 A low-shrink, readily pigmentable isophthalic system offering high LS additive compatibility. ai .. 1i

1.12

11 bi

11 k i

65%

80

1 ci

11 I /

10dPas 30

11 mi

11 di 3.3 11 n /

18 1.4%

11 e!

u o/

11 f i

II

I si Pi

]I hi I si

1 i i 113OC 1r i

Svnolife 6034-N-1 A chemical resistant, isophthalic system.

Svnolife 7223-N-1 An orthophthalic, low-shrink system offering a high HDT and a glossy moulded surface. ai 1.1 - 1.25 . ,

11 bi 63.5-66.5% 11 c j 14-16dPas 11 dl 11 k i loo 11 I i 41 Imi 3.8 11 ni

1 4 - 19 11 e! 1.2% 1 0 :

1f j II Pi

II si

1hj qi

1 i i 145OC 11 r i

Two impact modifiers are also listed: Svnolite 1537-X-1 & 7248-M-1

G8

UNCLASSIFIED USE

The company are able to supply a range of syntatic foams offering ultra-low density, low thermal expansion and excellent electrical properties coupled to good structural performance.

337

-

Databook Late Entries

3603 Haven Avenue. Menlo Park. CA 94025-1010. USA ~

Jel: +7 650 306 1650

‘

Fax: + 7 650 368 9878

The company - classing itself as a ‘specialty materials manufacturer’ - offers a range of temperature activated polymer products (epoxy, polyurethane and unsaturated polyester based), using a proprietary side chain crystallizable polymer technology.

H

SUNDRY APPLICATIONS HI

FLEXlBlLlSlNG RESINS

Distitron 166 A chemical resistant flexibilising resin for gelcoats.

I aj

11 b[

66%

11 c i

550

I

Distitron 131OSC A preaccelerated, special resin for flexibilising polyester filler pastes.

UNSATURATED POLYESTERS FOR BUTTON MANUFACTURE

H5

The company are part of the Alusuisse-Lonza Group and there is simularity therefore with certain of the thermoset resin systems manufactured and supplied by Lonza SPA. Where full, or respectable equivalence exists then the following Lonza tabulations can be employed. The same trade name, Disfifron, applies to both companies. Alusuisse 416E 416L1T100

Lonza 416BlV16 416L1T100

The following additional resins apply. Distitron 416 An orthophthalic resin suitable for the manufacture of buttons by the rod (rigid) casting process.

ai

1 bi

75%

11 c [

2100

1 dj

11 e[

11 f ;

I1 si

1 hi

1i i

530~

1

1i ]

5OoC

I

Distitron 466 An orthophthalic resin suitable for the manufacture of buttons by the rod (soft) casting process.

1 ai

338

fl

bi

73%

11 C !

1600

1 d!

11 e;

I] f i

u si

11 hi

- Low Profile Modifiers :DSM&ASF

H7

Structural Resins

UNSATURATED POLYESTERS FOR PAPER IMPREGNATION

The company are part of the Alusuisse-Lonza Group and there is simularity therefore with certain of the thermoset resin systems manufactured and supplied by Lonza SPA. Where full, or respectable equivalence exists then the following Lonza tabulation can be employed. The same trade name, Disfitfon, applies to both companies. Alusuisse 452

H8

Lonza 451

LOW PROFILE MODIFIERS

The following low profile additives are listed.

Svnolife 1080-M-1

Polyvinyl acetate type.

Svnolite

Saturated polyester type and provides a Class A surface condition.

2681-X-1

-

Svnolife 7223-M-1

Polystyrene type.

Svnolite 7248-M-1

Saturated polyester type.

Svnolife

7463-M-1

Saturated polyester type and offering good pigmentability.

Svnolite

8199-M-1

Acrylate type.

339

GLOSSARYOF TERMS

ACCELERATOR

Also called a promoter or an activator, a low percentage chemical addition, typically a zinc or cobalt salt, made to a thermoset resin, with the action of speeding up the cure rate, Le. reducing either (or both) the time and temperature at which cure takes place.

BARCOL

A number, typically between 25 and 50, which provides an indication of the hardness of a cured thermoset (but not for phenolics) resin - or laminate and in turn the all-important cure condition which has been achieved. In general, the higher the Barcol, then the better the environmental and/or chemical resistance.

-

CATALYST

A low percentage chemical addition, frequently a peroxide, and also called a hardener, which promotes the cure of a thermoset resin. Typically it oxidises the accelerator to release the necessary free radicals which cause the molecular change associated with cure or polymerisation.

COMPOSITE

A moulding employing the fundamental principle of a fibrous reinforcement - typically glass, carbon or aramid - improving the properties of a matrix such as a thermoset resin, in which that reinforcement is contained. The result is a homogeneous - but unalloyed - mixture of normally only two, completely dissimilar materials which confer their distinct and respective properties to each other, without the loss of separate identity or characteristic.

CROSS-LINKING

The molecular mechanism where the long polymer chains initially formed on polymerisation, then link together into a fully integrated structure.

CURE

The layman’s term for the timeAemperature related molecular crosslinking process known more correctly as polymerisation which occurs when a thermoset resin changes from the typically viscous liquid to the solid state. This cure process is normally also promoted following chemical activation by a catalyst - or often called, hardener addition. Other chemical accelerators may be added by the resin manufacturer, or alternatively added to the resin immediately prior to the catalyst addition. Cure can also be activated in other ways, such as by the influence of ultra-violet radiation. No by-products are formed during the formation of these long molecular cross-linked chain links.

-

-

-

FLOWCOATS

vi

A thin, pure resin and sometimes pigmented finish, applied as a final operation to the reverse face only of a hand-laminated or spraydeposited thermoset composites moulding. The purpose is to seal, or offer further moisture and other protection to that irregular, fibretextured surface. It prevents the reinforcement at the surface layer from becoming exposed during the components in-service life. To ensure that there is no residual surface tackiness, flowcoats often contain a small percentage of paraffin wax.

- Gossary Of Terms

-

-

GELCOATS

A thin (0.40 -.90mm: 0.016" 0.035"), usually pigmented but unreinforced, basically pure resin layer, forming the exposed or working face of a thermoset moulding. Although typically polyester based, that may not always apply. Gelcoats provide a hard, decorative finish whose resistance to fading, colour change or ultraviolet radiation attack, can be further enhanced by the addition of optical and other stabilisers. As gelcoats are applied by either brush or spray as the first stage in the actual moulding process, they can also be readily textured, taking that pattern directly from the mould-tool surface which they accurately and faithfully replicate. Specialised gelcoat grades offer resistance to osmosis, chemical or other more severe corrosive attack.

GEL-TIME

Relates to the length of time that an accelerated and catalysed thermoset resin remains workable and begins to solidify.

HARDNESS

See Barcol.

LAMINATE

The term frequently applied to the total thickness of a thermoset composites moulding, particularly when fabricated by hand-lay, spray/projection, cold-press or resin injection (resin transfer) moulding techniques. However more correctly it should only refer to the fibrereinforced portion of that total thickness and strictly speaking therefore, should not include the gelcoat, or when applicable, either the flowcoat or any other part or feature of the overall moulded component and its construction.

POLYMERISATION The molecular process of forming long, continuous and cross-link polymer chains. THERMOSET

Relates to resin matrices, which once changed by polymerisation from the initial liquid state, become an irreversible, infusible and environmentally-resistant, insoluble solid.

WET-OUT

A term which refers to the speed with which the thermoset matrix resin is completely absorbed by the fibre reinforcement, or in other words the speed with which that matrix completely replaces the air from around each filament, any void within that reinforcement, or other part of the composites formulation.

vii