Shackelford, James F. et al “Frontmatter” Materials Science and Engineering Handbook Ed. James F. Shackelford & W. Alexa...
44 downloads
1715 Views
13MB Size
Report
This content was uploaded by our users and we assume good faith they have the permission to share this book. If you own the copyright to this book and it is wrongfully on our website, we offer a simple DMCA procedure to remove your content from our site. Start by pressing the button below!
Report copyright / DMCA form
Shackelford, James F. et al “Frontmatter” Materials Science and Engineering Handbook Ed. James F. Shackelford & W. Alexander Boca Raton: CRC Press LLC, 2001
CRC
MATERIALS SCIENCE AND
ENGINEERING HANDBOOK THIRD EDITION
©2001 CRC Press LLC
CRC
MATERIALS SCIENCE AND
ENGINEERING HANDBOOK THIRD EDITION James F. Shackelford Professor of Materials Science and Engineering Division of Materials Science and Engineering and Associate Dean of the College of Engineering University of California, Davis
William Alexander Research Engineer Division of Materials Science and Engineering University of California, Davis
CRC Press Boca Raton London New York Washington, D.C.
©2001 CRC Press LLC
disclaimer Page 1 Wednesday, October 25, 2000 1:50 PM
Library of Congress Cataloging-in-Publication Data CRC materials science and engineering handbook / [edited by] James F. Shackelford, William Alexander.—3rd ed. p. cm. Includes bibliographical references and index. ISBN 0-8493-2696-6 (alk. paper) 1. Materials—Handooks, manuals, etc. I. Shackelford, James F. II. Alexander, William, 1950 Feb. 13TA403.4 .C74 2000 620.1′1—dc21
00-048567
This book contains information obtained from authentic and highly regarded sources. Reprinted material is quoted with permission, and sources are indicated. A wide variety of references are listed. Reasonable efforts have been made to publish reliable data and information, but the author and the publisher cannot assume responsibility for the validity of all materials or for the consequences of their use. Neither this book nor any part may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, microfilming, and recording, or by any information storage or retrieval system, without prior permission in writing from the publisher. The consent of CRC Press LLC does not extend to copying for general distribution, for promotion, for creating new works, or for resale. Specific permission must be obtained in writing from CRC Press LLC for such copying. Direct all inquiries to CRC Press LLC, 2000 N.W. Corporate Blvd., Boca Raton, Florida 33431. Trademark Notice: Product or corporate names may be trademarks or registered trademarks, and are used only for identification and explanation, without intent to infringe.
© 2001 by CRC Press LLC No claim to original U.S. Government works International Standard Book Number 0-8493-2696-6 Library of Congress Card Number 00-048567 Printed in the United States of America 1 2 3 4 5 6 7 8 9 0 Printed on acid-free paper
©2001 CRC Press LLC
TABLE OF CONTENTS
CHAPTER 1
Structure of Materials Electronic Structure of Selected Elements Available Stable Isotopes of the Elements Periodic Table of the Elements Periodic Table of Elements in Metallic Materials Periodic Table of Elements in Ceramic Materials Periodic Table of Elements in Polymeric Materials Periodic Table of Elements in Semiconducting Materials Periodic Table of Elements in Superconducting Metals Atomic and Ionic Radii of the Elements Bond Length Values Between Elements Periodic Table of Carbon Bond Lengths (Å) Carbon Bond Lengths Carbon Bond Lengths in Polymers Bond Angle Values Between Elements Key to Tables of Crystal Structure of the Elements The Seven Crystal Systems The Fourteen Bravais Lattices Periodic Table of the Body Centered Cubic Elements Periodic Table of the Face Centered Cubic Elements Periodic Table of the Hexagonal Close Packed Elements Periodic Table of the Hexagonal Elements
©2001 CRC Press LLC
Table of Contents Structure of Ceramics Atomic Mass of Selected Elements Solid Density of Selected Elements Density of Iron and Iron Alloys Density of Wrought Stainless Steels Density of Stainless Steels and Heat-Resistant Alloys Density of Aluminum Alloys Density of Copper and Copper Alloys Density of Magnesium and Magnesium Alloys Density of Nickel and Nickel Alloys Density of Lead and Lead Alloys Density of Tin and Tin Alloys Density of Wrought Titanium Alloys Density of Titanium and Titanium alloys Density of Zinc and Zinc Alloys Density of Permanent Magnet Materials Density of Precious Metals Density of Superalloys Density of Selected Ceramics Density of Glasses Specific Gravity of Polymers Density of 55MSI Graphite/6061 Aluminum Composites Density of Graphite Fiber Reinforced Metals Density of Si3N4 Composites CHAPTER 2
Composition of Materials Composition Limits of Tool Steels Composition Limits of Gray Cast Irons Composition Limits of Ductile Irons Composition Ranges for Malleable Irons Composition Ranges for Carbon Steels Composition Ranges for Resulfurized Carbon Steels Composition Ranges for Alloy Steels
©2001 CRC Press LLC CRC Handbook of Materials Science & Engineering
Table of Contents Composition of Stainless Steels Composition of Wrought Coppers and Copper Alloys Classification of Copper and Copper Alloys Composition Ranges for Cast Aluminum Alloys Composition Ranges for Wrought Aluminum Alloys Composition of Tin and Tin Alloys Compositions of ACI Heat-Resistant Casting Alloys Composition of Zinc Die Casting Alloys Compositions of Wrought Superalloys Typical Composition of Glass-Ceramics CHAPTER 3
Phase Diagram Sources Phase Diagram Sources
CHAPTER 4
Thermodynamic and Kinetic Data Bond Strengths in Diatomic Molecules Bond Strengths of Polyatomic Molecules Solubility of Copper and Copper Alloys Heat of Formation of Inorganic Oxides Phase Change Thermodynamic Properties for The Elements Phase Change Thermodynamic Properties of Oxides Melting Points of the Elements Melting Points of Elements and Inorganic Compounds Melting Points Of Ceramics Heat of Fusion For Elements and Inorganic Compounds Heats of Sublimation of Metals and Their Oxides Key to Tables of Thermodynamic Coefficients Thermodynamic Coefficients for Selected Elements Thermodynamic Coefficients for Oxides Entropy of the Elements Vapor Pressure of the Elements at Very Low Pressures Vapor Pressure of the Elements at Moderate Pressures Vapor Pressure of the Elements at High Pressures Vapor Pressure of Elements and Inorganic Compounds
©2001 CRC Press LLC Shackelford & Alexander
Table of Contents Values of The Error Function Diffusion in Metallic Systems Diffusion of Metals into Metals Diffusion in Semiconductors CHAPTER 5
Thermal Properties of Materials Specific Heat of the Elements at 25 ˚C Heat Capacity of Ceramics Specific Heat of Polymers Specific Heat of Fiberglass Reinforced Plastics Thermal Conductivity of Metals (Part 1) Thermal Conductivity of Metals (Part 2) Thermal Conductivity of Metals (Part 3) Thermal Conductivity of Metals (Part 4) Thermal Conductivity of Alloy Cast Irons Thermal Conductivity of Iron and Iron Alloys Thermal Conductivity of Aluminum and aluminum alloys Thermal Conductivity of Copper and Copper Alloys Thermal Conductivity of Magnesium and Magnesium Alloys Thermal Conductivity of Nickel and Nickel Alloys Thermal Conductivity of Lead and Lead Alloys Thermal Conductivity of Tin, Titanium, Zinc and their Alloys Thermal Conductivity of Pure Metals Thermal Conductivity of Ceramics Thermal Conductivity of Glasses Thermal Conductivity of Cryogenic Insulation Thermal Conductivity of Cryogenic Supports Thermal Conductivity of Special Concretes Thermal Conductivity of SiC-Whisker-Reinforced Ceramics Thermal Conductivity of Polymers Thermal Conductivity of Fiberglass Reinforced Plastics Thermal Expansion of Wrought Stainless Steels Thermal Expansion of Wrought Titanium Alloys
©2001 CRC Press LLC CRC Handbook of Materials Science & Engineering
Table of Contents Thermal Expansion of Graphite Magnesium Castings Linear Thermal Expansion of Metals and Alloys Thermal Expansion of Ceramics Thermal Expansion of SiC-Whisker-Reinforced Ceramics Thermal Expansion of Glasses Thermal Expansion of Polymers Thermal Expansion Coefficients of Materials for Integrated Circuits Thermal Expansion of Silicon Carbide SCS–2–Al ASTM B 601 Temper Designation Codes for Copper and Copper Alloys Temper Designation System for Aluminum Alloys Tool Steel Softening After 100 Hours Thermoplastic Polyester Softening with Temperature Heat-Deflection Temperature of Carbon- and Glass-Reinforced Engineering Thermoplastics CHAPTER 6
Mechanical Properties of Materials Tensile Strength of Tool Steels Tensile Strength of Gray Cast Irons Tensile Strength of Gray Cast Iron Bars Tensile Strength of Ductile Irons Tensile Strength of Malleable Iron Castings Tensile Strength of Austenitic Stainless Steels Tensile Strength of Ferritic Stainless Steels Tensile Strength of Precipitation-Hardening Austenitic Stainless Steels Tensile Strength of High–Nitrogen Austenitic Stainless Steels Tensile Strength of Martensitic Stainless Steels Tensile Strength of Wrought Coppers and Copper Alloys Tensile Strength of Aluminum Casting Alloys Tensile Strength of Wrought Aluminum Alloys Tensile Strength of Cobalt-Base Superalloys Tensile Strength of Nickel-Base Superalloys
©2001 CRC Press LLC Shackelford & Alexander
Table of Contents Tensile Strength of Wrought Titanium Alloys at Room Temperature Tensile Strength of Wrought Titanium Alloys at High Temperature Tensile Strength of Refractory Metal Alloys Tensile Strength of Ceramics Tensile Strength of Glass Tensile Strength of Polymers Tensile Strength of Fiberglass Reinforced Plastics Tensile Strength of Carbon- and Glass-Reinforced Engineering Thermoplastics Strength of Graphite Fiber Reinforced Metals Tensile Strength of Graphite/Magnesium Castings Tensile Strength of Graphite/Aluminum Composites Tensile Strength of Graphite/Aluminum Composites Tensile Strength of Silicon Carbide SCS–2–Al Ultimate Tensile Strength of Investment Cast Silicon Carbide SCS–Al Ultimate Tensile Strength of Silicon Carbide–Aluminum Alloy Composites Tensile Strength of SiC-Whisker–Reinforced Aluminum Alloy Ultimate Tensile Strength of Aluminum Alloy Reinforced with SiC Whiskers vs. Temperature Ultimate Tensile Strength of Reinforced Aluminum Alloy vs. Temperature Tensile Strength of Polycrystalline–Alumina–Reinforced Aluminum Alloy Tensile Strength of Boron/Aluminum Composites Compressive Strength of Gray Cast Iron Bars Compressive Strength of Ceramics Compressive Strength of Fiberglass Reinforced Plastic Ultimate Compressive Strength of Investment Cast Silicon Carbide SCS–Al Yield Strength of Tool Steels Yield Strength of Ductile Irons Yield Strength of Malleable Iron Castings Yield Strength of Austenitic Stainless Steels
©2001 CRC Press LLC CRC Handbook of Materials Science & Engineering
Table of Contents Yield Strength of Ferritic Stainless Steels Yield Strength of Martensitic Stainless Steels Yield Strength of Precipitation-Hardening Austenitic Stainless Steels Yield Strength of High–Nitrogen Austenitic Stainless Steels Yield Strength of Wrought Coppers and Copper Alloys Yield Strength of Cast Aluminum Alloys Yield Strength of Wrought Aluminum Alloys Yield Strength of Wrought Titanium Alloys at Room Temperature Yield Strength of Wrought Titanium Alloys at High Temperature Yield Strength of Cobalt-Base Superalloys Yield Strength of Nickel-Base Superalloys Yield Strength of Commercially Pure Tin Yield Strength of Polymers Yield Strength of SiC-Whisker–Reinforced Aluminum Alloy Yield Strength of Reinforced Aluminum Alloy vs. Temperature Yield Strength of Polycrystalline–Alumina–Reinforced Aluminum Alloy Compressive Yield Strength of Polymers Flexural Strength of Polymers Flextural Strength of Fiberglass Reinforced Plastics Shear Strength of Wrought Aluminum Alloys Torsion Shear Strength of Gray Cast Fe Hardness of Gray Cast Irons Hardness of Gray Cast Iron Bars Hardness of Malleable Iron Castings Hardness of Ductile Irons Hardness of Tool Steels Hardness of Austenitic Stainless Steels Hardness of Ferritic Stainless Steels Hardness of Martensitic Stainless Steels Hardness of Precipitation-Hardening Austenitic Stainless Steels Machinability Rating of Wrought Coppers and Copper Alloys Hardness of Wrought Aluminum Alloys Hardness of Wrought Titanium Alloys at Room Temperature
©2001 CRC Press LLC Shackelford & Alexander
Table of Contents Hardness of Ceramics Microhardness of Glass Hardness of Polymers Hardness of Si3N4 and Al2O3 Composites Coefficient of Static Friction for Polymers Abrasion Resistance of Polymers Fatigue Strength of Wrought Aluminum Alloys Reversed Bending Fatigue Limit of Gray Cast Iron Bars Impact Energy of Tool Steels Impact Strength of Wrought Titanium Alloys at Room Temperature Impact Strength of Polymers Impact Strength of Fiberglass Reinforced Plastics Impact Strength of Carbon- and Glass-Reinforced Engineering Thermoplastics Fracture Toughness of Si3N4 and Al2O3 Composites Tensile Modulus of Gray Cast Irons Tension Modulus of Treated Ductile Irons Tensile Modulus of Fiberglass Reinforced Plastics Tensile Modulus of Graphite/Aluminum Composites Tensile Modulus of Investment Cast Silicon Carbide SCS–Al Tensile Modulus of Silicon Carbide SCS–2–Al Young’s Modulus of Ceramics Young’s Modulus of Glass Elastic Modulus of Wrought Stainless Steels Modulus of Elasticity of Wrought Titanium Alloys Modulus of Elasticity in Tension for Polymers Modulus of Elasticity of 55MSI Graphite/6061 Aluminum Composites Modulus of Elasticity of Graphite/Magnesium Castings Modulus of Elasticity of Graphite/Aluminum Composites Modulus of Elasticity of Graphite Fiber Reinforced Metals Modulus of Elasticity of SiC-Whisker–Reinforced Aluminum Alloy
©2001 CRC Press LLC CRC Handbook of Materials Science & Engineering
Table of Contents Modulus of Elasticity of Polycrystalline–Alumina–Reinforced Aluminum Alloy Modulus of Elasticity of Boron/Aluminum Composites Compression Modulus of Treated Ductile Irons Modulus of Elasticity in Compression for Polymers Bulk Modulus of Glass Shear Modulus of Glass Torsional Modulus of Gray Cast Irons Torsion Modulus of Treated Ductile Irons Modulus of Elasticity in Flexure for Polymers Flexural Modulus of Fiberglass Reinforced Plastics Flexural Modulus of Carbon- and Glass-Reinforced Engineering Thermoplastics Modulus of Rupture for Ceramics Rupture Strength of Refractory Metal Alloys Rupture Strength of Superalloys Modulus of Rupture for Si3N4 and Al2O3Composites Poisson's Ratio of Wrought Titanium Alloys Poisson’s Ratio for Ceramics Poisson’s Ratio of Glass Poisson's Ratio of Silicon Carbide SCS–2–Al Compression Poisson’s Ratio of Treated Ductile Irons Torsion Poisson’s Ratio of Treated Ductile Irons Elongation of Tool Steels Elongation of Ductile Irons Elongation of Malleable Iron Castings Elongation of Ferritic Stainless Steels Elongation of Martensitic Stainless Steels Elongation of Precipitation-Hardening Austenitic Stainless Steels Elongation of High–Nitrogen Austenitic Stainless Steels Total Elongation of Cast Aluminum Alloys Elongation of Wrought Coppers and Copper Alloys Elongation of Commercially Pure Tin
©2001 CRC Press LLC Shackelford & Alexander
Table of Contents Elongation of Cobalt-Base Superalloys Elongation of Nickel-Base Superalloys Ductility of Refractory Metal Alloys Elongation of Wrought Titanium Alloys at Room Temperature Elongation of Wrought Titanium Alloys at High Temperature Total Elongation of Polymers Elongation at Yield for Polymers Ultimate Tensile Elongation of Fiberglass Reinforced Plastics Total Strain of Silicon Carbide SCS–2–Al Area Reduction of Tool Steels Reduction in Area of Austenitic Stainless Steels Reduction in Area of Ferritic Stainless Steels Reduction in Area of High–Nitrogen Austenitic Stainless Steels Reduction in Area of Precipitation-Hardening Austenitic Stainless Steels Reduction in Area of Martensitic Stainless Steels Reduction in Area of Commercially Pure Tin Area Reduction of Wrought Titanium Alloys at Room Temperature Area Reduction of Wrought Titanium Alloys at High Temperature Strength Density Ratio of Graphite Fiber Reinforced Metals Modulus Density Ratio of Graphite Fiber Reinforced Metals Viscosity of Glasses Internal Friction of SiO2 Glass Surface Tension of Elements at Melting Surface Tension of Liquid Elements CHAPTER 7
Electrical Properties of Materials Electrical Conductivity of Metals Electrical Resistivity of Metals Electrical Resistivity of Alloy Cast Irons Resistivity of Ceramics Volume Resistivity of Glass Volume Resistivity of Polymers
©2001 CRC Press LLC CRC Handbook of Materials Science & Engineering
Table of Contents Critical Temperature of Superconductive Elements Dissipation Factor for Polymers Dielectric Strength of Polymers Step Dielectric Strength of Polymers Dielectric Constant of Polymers Dielectric Breakdown of Polymers Dielectric Breakdown of Polymers Tangent Loss in Glass Electrical Permittivity of Glass Arc Resistance of Polymers CHAPTER 8
Optical Properties of Materials Transmission Range of Optical Materials Transparency of Polymers Refractive Index of Polymers Dispersion of Optical Materials
CHAPTER 9
Chemical Properties of Materials Water Absorption of Polymers Standard Electromotive Force Potentials Galvanic Series of Metals Galvanic Series of Metals in Sea Water Corrosion Rate of Metals in Acidic Solutions Corrosion Rate of Metals in Neutral and Alkaline Solutions Corrosion Rate of Metals in Air Corrosion Rates of 1020 Steel at 70˚F Corrosion Rates of Grey Cast Iron at 70˚F Corrosion Rates of Ni–Resist Cast Iron at 70˚F Corrosion Rates of 12% Cr Steel at 70˚ Corrosion Rates of 17% Cr Steel at 70˚F Corrosion Rates of 14% Si Iron at 70˚F Corrosion Rates of Stainless Steel 301 at 70˚F Corrosion Rates of Stainless Steel 316 at 70˚F Corrosion Rates of Aluminum at 70˚F
©2001 CRC Press LLC Shackelford & Alexander
Table of Contents Corrosion Resistance of Wrought Coppers and Copper Alloys Corrosion Rates of 70-30 Brass at 70˚F Corrosion Rates of Copper, Sn-Braze, Al-Braze at 70˚F Corrosion Rates of Silicon Bronze at 70˚F Corrosion Rates of Hastelloy at 70˚F Corrosion Rates of Inconel at 70˚F Corrosion Rates of Nickel at 70˚F Corrosion Rates of Monel at 70˚F Corrosion Rates of Lead at 70˚F Corrosion Rates of Titanium at 70˚F Corrosion Rates of ACI Heat–Resistant Castings Alloys in Air Corrosion Rates for ACI Heat–Resistant Castings Alloys in Flue Gas Flammability of Polymers Flammability of Fiberglass Reinforced Plastics CHAPTER 10
Selecting Structural Properties Selecting Atomic Radii of the Elements Selecting Ionic Radii of the Elements Selecting Bond Lengths Between Elements Selecting Bond Angles Between Elements Selecting Density of the Elements
CHAPTER 11
Selecting Thermodynamic and Kinetic Properties Selecting Bond Strengths in Diatomic Molecules Selecting Bond Strengths of Polyatomic Molecules Selecting Heat of Formation of Inorganic Oxides Selecting Specific Heat of Elements Selecting Specific Heat of Polymers Selecting Melting Points of The Elements Selecting Melting Points of Elements and Inorganic Compounds Selecting Melting Points of Ceramics Selecting Heat of Fusion For Elements and Inorganic Compounds Selecting Entropy of the Elements
©2001 CRC Press LLC CRC Handbook of Materials Science & Engineering
Table of Contents Selecting Diffusion Activation Energy in Metallic Systems CHAPTER 12
Selecting Thermal Properties Selecting Thermal Conductivity of Metals Selecting Thermal Conductivity of Metals at Temperature Selecting Thermal Conductivity of Alloy Cast Irons Selecting Thermal Conductivity of Ceramics Selecting Thermal Conductivity of Ceramics at Temperature Selecting Thermal Conductivity of Polymers Selecting Thermal Expansion of Tool Steels Selecting Thermal Expansion of Tool Steels at Temperature Selecting Thermal Expansion of Alloy Cast Irons Selecting Thermal Expansion of Ceramics Selecting Thermal Expansion of Glasses Selecting Thermal Expansion of Polymers Selecting Thermal Expansion Coefficients for Materials used in Integrated Circuits Selecting Thermal Expansion Coefficients for Materials used in Integrated Circuits at Temperature
CHAPTER 13
Selecting Mechanical Properties Selecting Tensile Strength of Tool Steels Selecting Tensile Strength of Gray Cast Irons Selecting Tensile Strength of Ductile Irons Selecting Tensile Strengths of Malleable Iron Castings Selecting Tensile Strengths of Aluminum Casting Alloys Selecting Tensile Strengths of Wrought Aluminum Alloys Selecting Tensile Strengths of Ceramics Selecting Tensile Strengths of Glass Selecting Tensile Strengths of Polymers Selecting Compressive Strengths of Gray Cast Iron Bars Selecting Compressive Strengths of Ceramics Selecting Compressive Strengths of Polymers Selecting Yield Strengths of Tool Steels
©2001 CRC Press LLC Shackelford & Alexander
Table of Contents Selecting Yield Strengths of Ductile Irons Selecting Yield Strengths of Malleable Iron Castings Selecting Yield Strengths of Cast Aluminum Alloys Selecting Yield Strengths of Wrought Aluminum Alloys Selecting Yield Strengths of Polymers Selecting Compressive Yield Strengths of Polymers Selecting Flexural Strengths of Polymers Selecting Shear Strengths of Wrought Aluminum Alloys Selecting Torsional Shear Strengths of Gray Cast Iron Bars Selecting Hardness of Tool Steels Selecting Hardness of Gray Cast Irons Selecting Hardness of Gray Cast Iron Bars Selecting Hardness of Ductile Irons Selecting Hardness of Malleable Iron Castings Selecting Hardness of Wrought Aluminum Alloys Selecting Hardness of Ceramics Selecting Microhardness of Glass Selecting Hardness of Polymers Selecting Coefficients of Static Friction for Polymers Selecting Abrasion Resistance of Polymers Selecting Fatigue Strengths of Wrought Aluminum Alloys Selecting Reversed Bending Fatigue Limits of Gray Cast Iron Bars Selecting Impact Energy of Tool Steels Selecting Impact Strengths of Polymers Selecting Tensile Moduli of Gray Cast Irons Selecting Tensile Moduli of Treated Ductile Irons Selecting Young’s Moduli of Ceramics Selecting Young’s Moduli of Glass Selecting Moduli of Elasticity in Tension for Polymers Selecting Compression Moduli of Treated Ductile Irons Selecting Modulus of Elasticity in Compression for Polymers Selecting Bulk Moduli of Glass
©2001 CRC Press LLC CRC Handbook of Materials Science & Engineering
Table of Contents Selecting Moduli of Elasticity in Flexure of Polymers Selecting Shear Moduli of Glass Selecting Torsional Moduli of Gray Cast Irons Selecting Torsional Moduli of Treated Ductile Irons Selecting Moduli of Rupture for Ceramics Selecting Poisson’s Ratios for Ceramics Selecting Poisson’s Ratios of Glass Selecting Compression Poisson’s Ratios of Treated Ductile Irons Selecting Torsion Poisson’s Ratios of Treated Ductile Irons Selecting Elongation of Tool Steels Selecting Elongation of Ductile Irons Selecting Elongation of Malleable Iron Castings Selecting Total Elongation of Cast Aluminum Alloys Selecting Total Elongation of Polymers Selecting Elongation at Yield of Polymers Selecting Area Reduction of Tool Steels CHAPTER 14
Selecting Electrical Properties Selecting Electrical Resistivity of Alloy Cast Irons Selecting Resistivity of Ceramics Selecting Volume Resistivity of Glass Selecting Volume Resistivity of Polymers Selecting Critical Temperature of Superconductive Elements Selecting Dissipation Factor for Polymers at 60 Hz Selecting Dissipation Factor for Polymers at 1 MHz Selecting Dielectric Strength of Polymers Selecting Dielectric Constants of Polymers at 60 Hz Selecting Dielectric Constants of Polymers at 1 MHz Selecting Tangent Loss in Glass Selecting Tangent Loss in Glass by Temperature Selecting Tangent Loss in Glass by Frequency Selecting Electrical Permittivity of Glass Selecting Electrical Permittivity of Glass by Frequency
©2001 CRC Press LLC Shackelford & Alexander
Table of Contents Selecting Arc Resistance of Polymers CHAPTER 15
Selecting Optical Properties Selecting Transmission Range of Optical Materials Selecting Transparency of Polymers Selecting Refractive Indices of Glasses Selecting Refractive Indices of Polymers
CHAPTER 16
Selecting Chemical Properties Selecting Water Absorption of Polymers Selecting Iron Alloys in 10% Corrosive Medium Selecting Iron Alloys in 100% Corrosive Medium Selecting Nonferrous Metals for use in a 10% Corrosive Medium Selecting Nonferrous Metals for use in a 100% Corrosive Medium Selecting Corrosion Rates of Metals Selecting Corrosion Rates of Metals in Corrosive Environments Selecting Flammability of Polymers
©2001 CRC Press LLC CRC Handbook of Materials Science & Engineering
2.1 Front Matter Page xvii Wednesday, December 31, 1969 17:00
Dedication
To Penelope and Scott Li-Li and Cassie
©2001 CRC Press LLC Shackelford & Alexander
Shackelford, James F. & Alexander, W.“Selecting Chemical Properties” Materials Science and Engineering Handbook Ed. James F. Shackelford & W. Alexander Boca Raton: CRC Press LLC, 2001
3.0 Structure Page 1 Wednesday, December 31, 1969 17:00
CHAPTER 1
Structure of Materials
List of Tables
Subatomic Structure Electronic Structure of Selected Elements Available Stable Isotopes of the Elements Atomic Structure Periodic Table of the Elements Periodic Table of Elements in Metallic Materials Periodic Table of Elements in Ceramic Materials Periodic Table of Elements in Polymeric Materials Periodic Table of Elements in Semiconducting Materials Periodic Table of Elements in Superconducting Metals Bond Structure Atomic and Ionic Radii of the Elements Bond Length Values Between Elements Periodic Table of Carbon Bond Lengths (Å) Carbon Bond Lengths Carbon Bond Lengths in Polymers Bond Angle Values Between Elements Crystal Structure Key to Tables of Crystal Structure of the Elements The Seven Crystal Systems
©2001 CRC Press LLC
1
3.0 Structure Page 2 Wednesday, December 31, 1969 17:00
Structural Properties List of Tables (Continued)
The Fourteen Bravais Lattices Periodic Table of the Body Centered Cubic Elements Periodic Table of the Face Centered Cubic Elements Periodic Table of the Hexagonal Close Packed Elements Periodic Table of the Hexagonal Elements Structure of Ceramics Density Atomic Mass of Selected Elements Solid Density of Selected Elements Density of Iron and Iron Alloys Density of Wrought Stainless Steels Density of Stainless Steels and Heat-Resistant Alloys Density of Aluminum Alloys Density of Copper and Copper Alloys Density of Magnesium and Magnesium Alloys Density of Nickel and Nickel Alloys Density of Lead and Lead Alloys Density of Tin and Tin Alloys Density of Wrought Titanium Alloys Density of Titanium and Titanium alloys Density of Zinc and Zinc Alloys Density of Permanent Magnet Materials Density of Precious Metals Density of Superalloys Density of Selected Ceramics Density of Glasses Specific Gravity of Polymers Density of 55MSI Graphite/6061 Aluminum Composites Density of Graphite Fiber Reinforced Metals Density of Si3N4 Composites
©2001 CRC Press LLC
2
CRC Handbook of Materials Science & Engineering
3.1 Structure Page 3 Wednesday, December 31, 1969 17:00
Structural Properties
Table 1. ELECTRONIC
At. Element No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54
Hydrogen Helium Lithium Beryllium Boron Carbon Nitrogen Oxygen Fluorine Neon Sodium Magnesium Aluminum Silicon Phosphorus Sulfur Chlorine Argon Potassium Calcium Scandium Titanium Vanadium Chromium Manganese Iron Cobalt Nickel Copper Zinc Gallium Germanium Arsenic Selenium Bromine Krypton Rubidium Strontium Yttrium Zirconium Niobium Molybdenum Technetium Ruthenium Rhodium Palladium Silver Cadmium Indium Tin Antimony Tellurium Iodine Xenon
STRUCTURE OF SELECTED ELEMENTS
Sym H He Li Be B C N O F N Na Mg Al Si P S Cl Ar K Ca Sc Ti V Cr Mn Fe Co Ni Cu Zn Ga Ge As Se Br Kr Rb Sr Y Zr Nb Mo Tc Ru Rh Pd Ag Cd In Sn Sb Te I Xe
Electronic Configuration 1s 2s 2p 3s 3p 1 2 . 1 . 2 . 2 1 . 2 2 . 2 3 . 2 4 . 2 5 . 2 6 . . . 1 . . . 2 . . . 2 1 . . . 2 2 . . . 2 3 . . . 2 4 . . . 2 5 . . . 2 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3d 4s
1 2 3 5 5 6 7 8 10 10 10 10 10 10 10 10 . . . . . . . . . . . . . . . . . .
1 2 2 2 2 1 2 2 2 2 1 2 2 2 2 2 2 2 . . . . . . . . . . . . . . . . . .
4p 4d
1 2 3 4 5 6 . . . . . . . . . . . . . . . . . .
1 2 4 5 6 7 8 10 10 10 10 10 10 10 10 10
4f
5s
5p 5d
5f
6s
6p 6d 7s
1 2 2 2 1 1 1 1 1 1 2 2 2 2 2 2 2
1 2 3 5 5 6
©2001 CRC Press LLC Shackelford & Alexander
3
3.1 Structure Page 4 Wednesday, December 31, 1969 17:00
Structural Properties
At. Element No.
Sym
Electronic Configuration 1s
55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103
Cesium Barium Lantium Cerium Praseodymium Neodymium Promethium Samarium Europium Gadolinium Terbium Dysprosium Holmium Erbium Thulium Ytterbium Lutetium Hafnium Tantalum Tungsten Rhenium Osmium Iridium Platinum Gold Mercury Thallium Lead Bismuth Polonium Asatine Radon Francium Radium Actinium Thorium Protoactinium Uranium Neptunium Plutonium Americium Curium Berkelium Californium Einsteinium Fermium Mendelevium Nobelium Lawrencium
Ce Ba La Ce Pr Nd Pm Sm Eu Gd Tb Dy Ho Er Tm Yb Lu Hf Ta W Re Os Ir Pt Au Hg Tl Pb Bi Po At Rn Fr Ra Ac Th Pa U Np Pu Am Cm Bk Cf Es Fm Md No Lw
2s
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2p 3s
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3p 3d 4s
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4p 4d
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4f
5s
2 3 4 5 6 7 7 9 10 11 12 13 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5p 5d
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5f
6p 6d 7s
1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
1
1
1 2 3 4 5 6 9 9 10 10 10 10 10 10 10 10 . . . . . . . . . . . . . . . . .
6s
2 3 4 6 7 7 9 10 11 12 13 14 14
1 1 2 2 2 2 2 2 2 . . . . . . . . . . . . . . . . .
1 2 3 4 5 6 . . . . . . . . . . . . . . . . .
1 2 1 1 1 1
1
1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
©2001 CRC Press LLC
4
CRC Handbook of Materials Science & Engineering
3.1 Structure Page 5 Wednesday, December 31, 1969 17:00
Structural Properties
Table 2. AVAILABLE
STABLE ISOTOPES OF THE ELEMENTS (SHEET 1 OF 11) Natural
Element
Mass No.
Abundance (%)
Hydrogen
1
99.985
2
0.015
Helium
3 4
0.00013 ≈100.0
Lithium
6 7
7.42 92.58
Beryllium
9
100.0
Boron
10 11
19.78 80.22
Carbon
12 13
98.89 1.11
Nitrogen
14 15
99.63 0.37
Oxygen
16 17 18
99.76 0.04 0.20
Fluorine
19
100.0
Neon
20 21 22
90.92 0.26 8.82
Sodium
23
100.0
Magnesium
24 25 26
78.70 10.13 11.17
Source: Wang, Y., Ed., Handbook of Radioactive Nuclides, The Chemical Rubber Co., Cleveland, 1969, 25.
©2001 CRC Press LLC Shackelford & Alexander
5
3.1 Structure Page 6 Wednesday, December 31, 1969 17:00
Structural Properties
Table 2. AVAILABLE
STABLE ISOTOPES OF THE ELEMENTS (SHEET 2 OF 11) Natural
Element
Mass No.
Abundance (%)
Aluminum
27
100.0
Silicon
28 29 30
92.21 4.70 3.09
Phosphorus
31
100.0
Sulfur
32 33 34 36
95.0 0.76 4.22 0.014
Chlorine
35 37
75.53 24.47
Argon
36 38 40
0.34 0.06 99.60
Potassium
39 40a 41
93.1
0.01
Calcium
40 42 43 44 46 48
96.97 0.64 0.14 2.06 0.003 0.18
Scandium
45
100.0
6.9
Source: Wang, Y., Ed., Handbook of Radioactive Nuclides, The Chemical Rubber Co., Cleveland, 1969, 25.
©2001 CRC Press LLC
6
CRC Handbook of Materials Science & Engineering
3.1 Structure Page 7 Wednesday, December 31, 1969 17:00
Structural Properties
Table 2. AVAILABLE
STABLE ISOTOPES OF THE ELEMENTS (SHEET 3 OF 11) Natural Mass No.
Abundance (%)
Titanium
46 47 48 49 50
7.93 7.28 73.94 5.51 5.34
Vanadium
50 51
0.24 99.76
Chromium
50 52 53 54
4.31 83.76 9.55 2.38
Manganese
55
100.0
Iron
54 56 57 58
5.82 91.66 2.19 0.33
Cobalt
59
100.0
Nickel
58 60 61 62 64
67.84 26.23 1.19 3.66 1.08
Copper
63 65
69.09 30.91
Element
Source: Wang, Y., Ed., Handbook of Radioactive Nuclides, The Chemical Rubber Co., Cleveland, 1969, 25.
©2001 CRC Press LLC Shackelford & Alexander
7
3.1 Structure Page 8 Wednesday, December 31, 1969 17:00
Structural Properties
Table 2. AVAILABLE
STABLE ISOTOPES OF THE ELEMENTS (SHEET 4 OF 11) Natural Mass No.
Abundance (%)
Zinc
64 66 67 68 70
48.89 27.81 4.11 18.57 0.62
Gallium
69 71
60.4 39.6
Germanium
70 72 73 74 76
20.52 27.43 7.76 36.54 7.76
Arsenic
75
100.0
Selenium
74 76 77 78 80 82
0.87 9.02 7.58 23.52 49.82 9.19
Bromine
79 81
50.54 49.46
Krypton
78 80 82 83 84 86
0.35 2.27 11.56 11.55 56.90 17.37
Rubidium
85 87
72.15 27.85
Element
Source: Wang, Y., Ed., Handbook of Radioactive Nuclides, The Chemical Rubber Co., Cleveland, 1969, 25.
©2001 CRC Press LLC
8
CRC Handbook of Materials Science & Engineering
3.1 Structure Page 9 Wednesday, December 31, 1969 17:00
Structural Properties
Table 2. AVAILABLE
STABLE ISOTOPES OF THE ELEMENTS (SHEET 5 OF 11) Natural Mass No.
Abundance (%)
Strontium
84 86 87 88
0.56 9.86 7.02 82.56
Yttrium
89
100.0
Zirconium
90 91 92 94 96
51.46 11.23 17.11 17.40 2.80
Niobium
93
100.0
Molybdenum
92 94 95 96 97 98 100
15.84 9.04 15.72 16.53 9.46 23.78 9.63
Ruthenium
96 98 99 100 101 102 104
5.51 1.87 12.72 12.62 17.07 31.61 18.60
Rhodium
103
100.0
Element
Source: Wang, Y., Ed., Handbook of Radioactive Nuclides, The Chemical Rubber Co., Cleveland, 1969, 25.
©2001 CRC Press LLC Shackelford & Alexander
9
3.1 Structure Page 10 Wednesday, December 31, 1969 17:00
Structural Properties
Table 2. AVAILABLE
STABLE ISOTOPES OF THE ELEMENTS (SHEET 6 OF 11) Natural Mass No.
Abundance (%)
Palladium
102 104 105 106 108 110
0.96 10.97 22.23 27.33 26.71 11.81
Silver
107 109
51.82 48.18
Cadmium
106 108 110 111 112 113 114 116
1.22 0.88 12.39 12.75 24.07 12.26 28.86 7.58
Indium
113 115
4.28 95.72
Tin
112 114 115 116 117 118 119 120 122 124
0.96 0.66 0.35 14.30 7.61 24.03 8.58 32.85 4.72 5.94
Antimony
121 123
57.25 42.75
Element
Source: Wang, Y., Ed., Handbook of Radioactive Nuclides, The Chemical Rubber Co., Cleveland, 1969, 25.
©2001 CRC Press LLC
10
CRC Handbook of Materials Science & Engineering
3.1 Structure Page 11 Wednesday, December 31, 1969 17:00
Structural Properties
Table 2. AVAILABLE
STABLE ISOTOPES OF THE ELEMENTS (SHEET 7 OF 11) Natural Mass No.
Abundance (%)
Tellurium
120 122 123 124 125 126 128 130
0.09 2.46 0.87 4.61 6.99 18.71 31.79 34.48
Iodine
127
100.0
Xenon
124 126 128 129 130 131 132 134 136
0.096 0.090 1.92 26.44 4.08 21.18 26.89 10.44 8.87
Cesium
133
100.0
Barium
130 132 134 135 136 137 138
0.101 0.097 2.42 6.59 7.81 11.30 71.66
Lanthanum
138 139
0.09 99.91
Element
Source: Wang, Y., Ed., Handbook of Radioactive Nuclides, The Chemical Rubber Co., Cleveland, 1969, 25.
©2001 CRC Press LLC Shackelford & Alexander
11
3.1 Structure Page 12 Wednesday, December 31, 1969 17:00
Structural Properties
Table 2. AVAILABLE
STABLE ISOTOPES OF THE ELEMENTS (SHEET 8 OF 11) Natural Mass No.
Abundance (%)
136 138 140 142d
0.193 0.250 88.48
11.07
141
100.0
Neodymium
142 143 144 146 148 150
27.11 12.17 23.85 17.22 5.73 5.62
Samarium
144 147e 148f 149g 150 152 154
Element Cerium
Praseodymium
3.09
14.97 11.24 13.83 7.44 26.72 22.71
Europium
151 153
47.82 52.18
Gadolinium
152h 154 155 156 157 158 160
0.20 2.15 14.73 20.47 15.68 24.87 21.90
159
100.0
Terbium
Source: Wang, Y., Ed., Handbook of Radioactive Nuclides, The Chemical Rubber Co., Cleveland, 1969, 25.
©2001 CRC Press LLC
12
CRC Handbook of Materials Science & Engineering
3.1 Structure Page 13 Wednesday, December 31, 1969 17:00
Structural Properties
Table 2. AVAILABLE
STABLE ISOTOPES OF THE ELEMENTS (SHEET 9 OF 11) Natural Mass No.
Abundance (%)
156i 158 160 161 162 163 164
0.052
Holmium
165 186
100.0 28.41
Erbium
162 164 166 167 168 170 186
0.136 1.56 33.41 22.94 27.07 14.88 1.59
Thulium
169 189
100.0 16.1
Ytterbium
168 170 171 172 173 174 176
0.135 3.03 14.31 21.82 16.13 31.84 12.73
Lutetium
175 176j
97.40
Element
Dysprosium
0.090 2.29 18.88 25.53 24.97 28.18
2.60
Source: Wang, Y., Ed., Handbook of Radioactive Nuclides, The Chemical Rubber Co., Cleveland, 1969, 25.
©2001 CRC Press LLC Shackelford & Alexander
13
3.1 Structure Page 14 Wednesday, December 31, 1969 17:00
Structural Properties
Table 2. AVAILABLE
STABLE ISOTOPES OF THE ELEMENTS (SHEET 10 OF 11) Natural Mass No.
Abundance (%)
174k 176 177 178 179 180
0.18 5.20 18.50 27.14 13.75 35.24
Tantalum
180 181
0.012 99.988
Tungsten
180 182 183 184
0.14 26.41 14.40 30.64
Rhenium
185 187
37.07 62.93
Osmium
184 187 188 190 192
0.018 1.64 13.3 26.4 41.0
Iridium
191 193
37.3 62.7
Platinum
190m 192 194 195 196 198
0.013
197
100.0
Element
Haffiium
Gold
0.78 32.9 33.8 25.3 7.2
Source: Wang, Y., Ed., Handbook of Radioactive Nuclides, The Chemical Rubber Co., Cleveland, 1969, 25.
©2001 CRC Press LLC
14
CRC Handbook of Materials Science & Engineering
3.1 Structure Page 15 Wednesday, December 31, 1969 17:00
Structural Properties
Table 2. AVAILABLE
STABLE ISOTOPES OF THE ELEMENTS (SHEET 11 OF 11) Natural Mass No.
Abundance (%)
Mercury
196 198 199 200 201 202 204
0.146 10.02 16.84 23.13 13.22 29.80 6.85
Thallium
203 205
29.50 70.50
Lead
204 206 207 208
1.48 23.6 22.6 52.3
Bismuth
209
100.0
Thorium
232n†
100.0
Uranium
234o† 235p† 238q†
0.0006 0.72 99.27
Element
Source: Wang, Y., Ed., Handbook of Radioactive Nuclides, The Chemical Rubber Co., Cleveland, 1969, 25.
a b c d e f g h
i
half-life = 1.3 x 109 y. half-life > 1015 y half-life = 5 x 1014 y half-life = 5 x 1014 y half-life = 1.06 x 1011 y half-life = 1.2 x 1013 y half-life = 1.2 x 1014 y half-life = 1.1 x 1014 y half-life = 2 x 1014 y
j
half-life = 2.2 x 1010 y k half-life = 4.3 x 1015 y l half-life = 4 x 1010 y m half-life = 6 x 1011 y n half-life = 1.4 x 1010 y o half-life = 2.5 x 105 y p half-life = 7.1 x 108 y q half-life = 4.5 x 109 y † naturally occurring.
©2001 CRC Press LLC Shackelford & Alexander
15
3.2 Structure L Page 16 Wednesday, December 31, 1969 17:00
1 IA
2
3
4
5
Table 3. PERIODIC
TABLE OF THE ELEMENTS
6
9
7
8
10
11
12
13
14
15
16
17
18 VIIA
1 H
IIA
IIIA
IVA
VA
VIA
VIIA
2 He
3 Li
4 Be
5 B
6 C
7 N
8 O
9 F
10 Ne
11 Na
12 Mg
IIIB
IVB
VB
VIB
VIIB
-----
VIII
-----
IB
IIB
13 Al
14 Si
15 P
16 S
17 Cl
18 Ar
19 K
20 Ca
21 Sc
22 Ti
23 V
24 Cr
25 Mn
26 Fe
27 Co
28 Ni
29 Cu
30 Zn
31 Ga
32 Ge
33 As
34 Se
35 Br
36 Kr
37 Rb
38 Sr
39 Y
40 Zr
41 Nb
42 Mo
43 Tc
44 Ru
45 Rh
46 Pd
47 Ag
48 Cd
49 In
50 Sn
51 Sb
52 Te
53 I
54 Xe
55 Cs
56 Ba
72 Hf
73 Ta
74 W
75 Re
76 Os
77 Ir
78 Pt
79 Au
80 Hg
81 Tl
82 Pb
83 Bi
84 Po
85 At
86 Rn
87 Fr
88 Ra
57 La
58 Ce
59 Pr
60 Nd
61 Pm
62 Sm
63 Eu
64 Gd
65 Tb
66 Dy
67 Ho
68 Er
69 Tm
70 Yb
71 Lu
89 Ac
90 Th
91 Pa
92 U
93 Np
94 Pu
95 Am
96 Cm
97 Bk
98 Cf
99 Es
100 Fm
101 Md
102 No
103 Lw
©2001 CRC Press LLC
3.2 Structure L Page 17 Wednesday, December 31, 1969 17:00
Table 4. PERIODIC 1 IA
2
3
4
5
6
TABLE OF ELEMENTS IN METALLIC MATERIALS 7
8
9
10
11
12
13
14
15
16
17
IIA
IIIA
IVA
VA
VIA
VIIA
3 Li
4 Be
5 B
11 Na
12 Mg
IIIB
IVB
VB
VIB
VIIB
-----
VIII
-----
IB
IIB
13 Al
19 K
20 Ca
21 Sc
22 Ti
23 V
24 Cr
25 Mn
26 Fe
27 Co
28 Ni
29 Cu
30 Zn
31 Ga
37 Rb
38 Sr
39 Y
40 Zr
41 Nb
42 Mo
43 Tc
44 Ru
45 Rh
46 Pd
47 Ag
48 Cd
49 In
50 Sn
51 Sb
55 Cs
56 Ba
72 Hf
73 Ta
74 W
75 Re
76 Os
77 Ir
78 Pt
79 Au
80 Hg
81 Tl
82 Pb
83 Bi
87 Fr
88 Ra
57 La
58 Ce
59 Pr
60 Nd
61 Pm
62 Sm
63 Eu
64 Gd
65 Tb
66 Dy
67 Ho
68 Er
69 Tm
70 Yb
71 Lu
89 Ac
90 Th
91 Pa
92 U
93 Np
94 Pu
95 Am
96 Cm
97 Bk
98 Cf
99 Es
100 Fm
101 Md
102 No
103 Lw
©2001 CRC Press LLC
18 VIIA
3.2 Structure L Page 18 Wednesday, December 31, 1969 17:00
Table 5. PERIODIC 1 IA
2
3
4
5
6
TABLE OF ELEMENTS IN CERAMIC MATERIALS
7
8
9
10
11
12
13
14
15
16
17
IIA
IIIA
IVA
VA
VIA
VIIA
3 Li
4 Be
5 B
6 C
7 N
8 O
11 Na
12 Mg
IIIB
IVB
VB
VIB
VIIB
-----
VIII
-----
IB
IIB
13 Al
14 Si
15 P
16 S
19 K
20 Ca
21 Sc
22 Ti
23 V
24 Cr
25 Mn
26 Fe
27 Co
28 Ni
29 Cu
30 Zn
31 Ga
32 Ge
37 Rb
38 Sr
39 Y
40 Zr
41 Nb
42 Mo
43 Tc
44 Ru
45 Rh
46 Pd
47 Ag
48 Cd
49 In
50 Sn
51 Sb
55 Cs
56 Ba
72 Hf
73 Ta
74 W
75 Re
76 Os
77 Ir
78 Pt
79 Au
80 Hg
81 Tl
82 Pb
83 Bi
87 Fr
88 Ra
57 La
58 Ce
59 Pr
60 Nd
61 Pm
62 Sm
63 Eu
64 Gd
65 Tb
66 Dy
67 Ho
68 Er
69 Tm
70 Yb
71 Lu
89 Ac
90 Th
91 Pa
92 U
93 Np
94 Pu
95 Am
96 Cm
97 Bk
98 Cf
99 Es
100 Fm
101 Md
102 No
103 Lw
©2001 CRC Press LLC
18 VIIA
3.2 Structure L Page 19 Wednesday, December 31, 1969 17:00
1 IA 1 H
2
3
Table 6. PERIODIC
TABLE OF ELEMENTS IN POLYMERIC MATERIALS
4
7
5
6
8
9
10
11
12
IIA
IIIB
©2001 CRC Press LLC
IVB
VB
VIB
VIIB
-----
VIII
-----
IB
IIB
13
14
15
16
17
IIIA
IVA
VA
VIA
VIIA
6 C
7 N
8 O
9 F
14 Si
18 VIIA
3.2 Structure L Page 20 Wednesday, December 31, 1969 17:00
Table 7. PERIODIC 1 IA
2
3
4
5
6
TABLE OF ELEMENTS IN SEMICONDUCTING MATERIALS 7
8
9
10
11
12
IIA
13
14
15
16
17
IIIA
IVA
VA
VIA
VIIA
8 O IIIB
IVB
VB
VIB
VIIB
-----
VIII
-----
IB
IIB
13 Al
14 Si
15 P
16 S
30 Zn
31 Ga
32 Ge
33 As
34 Se
48 Cd
49 In
50 Sn
51 Sb
52 Te
80 Hg
©2001 CRC Press LLC
18 VIIA
3.2 Structure L Page 21 Wednesday, December 31, 1969 17:00
Table 8. PERIODIC 1 IA
2
3
4
5
6
TABLE OF ELEMENTS IN SUPERCONDUCTING METALS 7
8
9
10
11
12
IIA
13
14
15
16
17
IIIA
IVA
VA
VIA
VIIA
50 Sn
51 Sb
4 Be IIIB
IVB
VB
22 Ti
23 V
40 Zr
41 Nb
42 Mo
43 Tc
44 Ru
73 Ta
74 W
75 Re
76 Os
57 La 90 Th
©2001 CRC Press LLC
91 Pa
VIB
VIIB
-----
VIII
77 Ir
-----
IB
IIB
13 Al
30 Zn
31 Ga
48 Cd
49 In
80 Hg
82 Pb
18 VIIA
3.3 Structure Page 22 Wednesday, December 31, 1969 17:00
Structural Properties
Table 9. ATOMIC AND IONIC RADII OF THE (SHEET 1 OF 5)
ELEMENTS
Atomic Number
Symbol
Atomic Radius (nm)
Ion
Ionic Radius (nm)
1 2 3 4
H He Li Be
0.046 – 0.152 0.114
H– – Li+ Be2+
0.154 – 0.078 0.054
5 6 7 8
B C N O
0.097 0.077 0.071 0.060
B3+ C4+ N5+ 02–
0.02 <0.02 0.01–0.2 0.132
9 10 11 12
F Ne Na Mg
– 0.160 0.186 0.160
F– – Na+ Mg2+
0.133 – 0.098 0.078
13 14 . 15
Al Si
0.143 0.117
P
0.109
Al3+ Si4– Si4+ P5+
0.057 0.198 0.039 0.03–0.04
16
S
0.106
17 18
Cl Ar
0.107 0.192
S2– S6+ Cl– –
0.174 0.034 0.181 –
19 20 21
K Ca Sc
0.231 0.197 0.160
K+ Ca2+ Sc2+
0.133 0.106 0.083
Source: Data from R. A. Flinn and P. K. Trojan, Engineering Materials and Their Applications, Houghton Mifflin Company, Boston, 1975. The ionic radii are based on the calculations of V. M. Goldschmidt, who assigned radii based on known interatomic distances in various ionic crystals.
©2001 CRC Press LLC
22
CRC Handbook of Materials Science & Engineering
3.3 Structure Page 23 Wednesday, December 31, 1969 17:00
Structural Properties
Table 9. ATOMIC AND IONIC RADII OF THE (SHEET 2 OF 5) Atomic Number
Symbol
Atomic Radius (nm)
22
Ti
23
ELEMENTS
Ion
Ionic Radius (nm)
0.147
Ti2+ Ti3+ Ti4+
0.076 0.069 0.064
V
0.132
V3+ V4+ V5+
0.065 0.061 0.04
24
Cr
0.125
Cr3+ Cr6+
0.064 0.03–0.04
25
Mn
0.112
Mn2+ Mn3+ Mn4+
0.091 0.070 0.052
26
Fe
0.124
27
Co
0.125
Fe2+ Fe2+ Co2+ Co3+
0.087 0.067 0.082 0.065
28 29 30 31
Ni Cu Zn Ga
0.125 0.128 0.133 0.135
Ni2+ Cu+ Zn2+ Ga3+
0.078 0.096 0.083 0.062
32 33
Ge As
0.122 0.125
Ge4+ As3+ As5+
0.044 0.069 ~0.04
34
Se
0.116
35 36
Br Kr
0.119 0.197
Se2– Se6+ Br– –
0.191 0.03–0.04 0.196 –
Source: Data from R. A. Flinn and P. K. Trojan, Engineering Materials and Their Applications, Houghton Mifflin Company, Boston, 1975. The ionic radii are based on the calculations of V. M. Goldschmidt, who assigned radii based on known interatomic distances in various ionic crystals.
©2001 CRC Press LLC Shackelford & Alexander
23
3.3 Structure Page 24 Wednesday, December 31, 1969 17:00
Structural Properties
Table 9. ATOMIC AND IONIC RADII OF THE (SHEET 3 OF 5)
ELEMENTS
Atomic Number
Symbol
Atomic Radius (nm)
Ion
Ionic Radius (nm)
37 38 39
Rb Sr Y
0.251 0.215 0.181
Rb+ Sr2+ Y3+
0.149 0.127 0.106
40
Zr
0.158
Zr4+
0.087
41
Nb
0.143
42
Mo
0.136
Nb4+ Nb5+ Mo4+ Mo6+
0.074 0.069 0.068 0.065
43 44 45
Tc Ru Rh
– 0.134 0.134
– Ru4+ Rh3+ Rh4+
– 0.065 0.068 0.065
46 47 48 49
Pd Ag Cd In
0.137 0.144 0.150 0.157
Pd2+ Ag+ Cd2+ In3+
0.050 0.113 0.103 0.091
50
Sn
0.158
51
Sb
0.161
Sn4– Sn4+ Sb3+
0.215 0.074 0.090
52
Te
0.143
Te2– Te4+
0.211 0.089
53
I
0.136
54 55
Xe Cs
0.218 0.265
I– I5+ – Cs+
0.220 0.094 – 0.165
Source: Data from R. A. Flinn and P. K. Trojan, Engineering Materials and Their Applications, Houghton Mifflin Company, Boston, 1975. The ionic radii are based on the calculations of V. M. Goldschmidt, who assigned radii based on known interatomic distances in various ionic crystals.
©2001 CRC Press LLC
24
CRC Handbook of Materials Science & Engineering
3.3 Structure Page 25 Wednesday, December 31, 1969 17:00
Structural Properties
Table 9. ATOMIC AND IONIC RADII OF THE (SHEET 4 OF 5) Atomic Number
Symbol
Atomic Radius (nm)
56 57 58
Ba La Ce
59
ELEMENTS
Ion
Ionic Radius (nm)
0.217 0.187 0.182
Ba2+ La3+ Ce3+ Ce4+
0.13 0.122 0.118 0.102
Pr
0.183
Pr3+ Pr4+
0.116 0.100
60 61
Nd Pm
0.182 –
Nd3+ Pm3+
0.115 0.106
62 63 64
Sm Eu Gd
0.181 0.204 0.180
Sm3+ Eu3+ Gd3+
0.113 0.113 0.111
65
Tb
0.177
66 67
Dy Ho
0.177 0.176
Tb3+ Tb4+ Dy3+ Ho3+
0.109 0.089 0.107 0.105
68 69 70 71
Er Tm Yb Lu
0.175 0.174 0.193 0.173
Er3+ Tm3+ Yb3+ Lu3+
0.104 0.104 0.100 0.099
72 73 74
Hf Ta W
0.159 0.147 0.137
Hf4+ Ta5+ W4+ W6+
0.084 0.068 0.068 0.065
75 76 77
Re Os Ir
0.138 0.135 0.135
Re4+ Os4+ Ir4+
0.072 0.067 0.066
Source: Data from R. A. Flinn and P. K. Trojan, Engineering Materials and Their Applications, Houghton Mifflin Company, Boston, 1975. The ionic radii are based on the calculations of V. M. Goldschmidt, who assigned radii based on known interatomic distances in various ionic crystals.
©2001 CRC Press LLC Shackelford & Alexander
25
3.3 Structure Page 26 Wednesday, December 31, 1969 17:00
Structural Properties
Table 9. ATOMIC AND IONIC RADII OF THE (SHEET 5 OF 5) Atomic Number
Symbol
Atomic Radius (nm)
78
Pt
0.138
79 80
Au Hg
0.144 0.150
81
Tl
82
ELEMENTS
Ion
Ionic Radius (nm)
Pt2+ Pt4+ Au+ Hg2+
0.052 0.055 0.137 0.112
0.171
Tl+ Tl3+
0.149 0.106
Pb
0.175
83
Bi
0.182
Pb4– Pb2+ Pb4+ Bi3+
0.215 0.132 0.084 0.120
84 85 86 87
Po At Rn Fr
0.140 – – –
Po6+ At7+ – Fr+
0.067 0.062 – 0.180
88 89 90 91
Ra Ac Th Pa
– – 0.180 –
Ra+ Ac3+ Th4+ –
0.152 0.118 0.110 –
92
U
0.138
U4+
0.105
Source: Data from R. A. Flinn and P. K. Trojan, Engineering Materials and Their Applications, Houghton Mifflin Company, Boston, 1975. The ionic radii are based on the calculations of V. M. Goldschmidt, who assigned radii based on known interatomic distances in various ionic crystals.
©2001 CRC Press LLC
26
CRC Handbook of Materials Science & Engineering
3.3 Structure Page 27 Wednesday, December 31, 1969 17:00
Structural Properties
Table 10. BOND
LENGTH VALUES BETWEEN ELEMENTS (SHEET 1 OF 4)
Elements
Compound
B-B B-Br
B2H6 BBF BBr3
1.770 1.88 1.87
B-Cl
BCl BCl3
B-F
BF BF3
1.715 1.72 1.262 1.29
B-H B-H bridge B-N
Hydrides Hydrides (BClNH)3
1.21 1.39 1.42
B-0
BO B(OH)3
N-Cl
NO2Cl
N-F N-H
N-N
N-O
Bond length (Å)
±
0.013
±
0.02
±
0.01
±
0.01
± ± ±
.02 .02 .01
1.2049 1.362
±
0.005 (av)
NF3
1.79 1.36
± ±
0.02 0.02
[NH4]+ NH ND HNCS
1.034 1.038 1.041 1.013
±
0.003
±
0.005
N 3H N 2O
1.02 1.126
± ±
0.01 0.002
[N2]+
1.116
NO2Cl NO2
1.24 1.188
± ±
0.01 0.005
To convert Å to nm, multiply by 10-1 Source: from Kennard, O., in Handbook of Chemistry and Physics, 69th ed., Weast, R. C., Ed., CRC Press, Boca Raton, Fla., 1988, F-167.
©2001 CRC Press LLC Shackelford & Alexander
27
3.3 Structure Page 28 Wednesday, December 31, 1969 17:00
Structural Properties
Table 10. BOND
LENGTH VALUES BETWEEN ELEMENTS (SHEET 2 OF 4)
Elements
Compound
N=O
N2O
Bond length (Å)
[NO]+
1.186 1.0619
N-Si
SiN
1.572
O-H
[OH]+ OD H2O2
1.0289 0.9699 0.960
B2H6
1.770 1.88 1.87
B-B B-Br
BBF BBr3
B-Cl
BCl BCl3
B-F
±
0.002
±
0.005
±
0.013
±
0.02
±
0.01
BF BF3
1.715 1.72 1.262 1.29
±
0.01
B-H B-H bridge B-N
Hydrides Hydrides (BClNH)3
1.21 1.39 1.42
± ± ±
.02 .02 .01
B-0
BO B(OH)3
1.2049 1.362
±
0.005 (av)
N-Cl
NO2Cl
N-F
NF3
1.79 1.36
± ±
0.02 0.02
N-H
[NH4]+ NH ND HNCS
1.034 1.038 1.041 1.013
±
0.003
±
0.005
To convert Å to nm, multiply by 10-1 Source: from Kennard, O., in Handbook of Chemistry and Physics, 69th ed., Weast, R. C., Ed., CRC Press, Boca Raton, Fla., 1988, F-167.
©2001 CRC Press LLC
28
CRC Handbook of Materials Science & Engineering
3.3 Structure Page 29 Wednesday, December 31, 1969 17:00
Structural Properties
Table 10. BOND
LENGTH VALUES BETWEEN ELEMENTS (SHEET 3 OF 4)
Elements
Compound
N-N
N 3H
Bond length (Å)
N 2O
1.02 1.126
± ±
0.01 0.002
[N2]+
1.116
N-O
NO2Cl NO2
1.24 1.188
± ±
0.01 0.005
N=O
N 2O
±
0.002
[NO]
1.186 1.0619
N-Si
SiN
1.572
O-H
[OH]+ OD H2O2
1.0289 0.9699 0.960
±
0.005
H2O2
1.48
±
0.01
[O2]+
1.227
[O2]-
1.26
±
0.2
1.49
±
0.02
±
0.02
±
0.02
± ±
0.02 0.005
+
O-O
--
[O2] P-D P-H P-N P-S
PD [PH4]+ PN PSBr3 (Cl3,F3)
1.429 1.42 1.4910 1.86
S-Br
SOBr2
S-F S-D
SOF2 SD SD2
2.27 1.585 1.3473 1.345
To convert Å to nm, multiply by 10-1 Source: from Kennard, O., in Handbook of Chemistry and Physics, 69th ed., Weast, R. C., Ed., CRC Press, Boca Raton, Fla., 1988, F-167.
©2001 CRC Press LLC Shackelford & Alexander
29
3.3 Structure Page 30 Wednesday, December 31, 1969 17:00
Structural Properties
Table 10. BOND
LENGTH VALUES BETWEEN ELEMENTS (SHEET 4 OF 4)
Elements
Compound
Bond length (Å)
S-O S-S
SO2 SOCl2 S2Cl2
1.4321 1.45 2.04
± ±
0.02 0.01
Si-Br
SiBr4
Si-Cl Si-F
SiCl4 SiF4
2.17 2.03 1.561
± ± ±
1.01 1.01 (av) 0.003 (av)
Si-H
SiH4
1.480
±
0.005
Si-O Si-Si
[SiO]+ Si2Cl2
1.504 2.30
±
0.02
To convert Å to nm, multiply by 10-1 Source: from Kennard, O., in Handbook of Chemistry and Physics, 69th ed., Weast, R. C., Ed., CRC Press, Boca Raton, Fla., 1988, F-167.
©2001 CRC Press LLC
30
CRC Handbook of Materials Science & Engineering
3.4 Structure L Page 31 Wednesday, December 31, 1969 17:00
Table 11. PERIODIC 1 IA H 1.06
2
3
13
14
15
16
17
IIA
IIIA
IVA
VA
VIA
VIIA
Be 1.93
B 1.56
C 1.2
N 1.47
O 1.43
F 1.55
Al 2.24
Si 1.8
P 1.87
S 1.81
Cl 1.7
Ge 1.98
As 1.98
Se 1.98
Br 1.9
Sn 2.15
Sb 2.16
Te 2.05
I 2.1
Pb 2.29
Bi 2.30
IIIB
4
IVB
5
VB
6
VIB Cr 1.92 Mo 2.08 W 2.06
©2001 CRC Press LLC
7
TABLE OF CARBON BOND LENGTHS (Å)
VIIB
8
9
10
-----
VIII
-----
Fe 1.94
Co 1.93
Ni 18.2
11
IB
12
IIB
Pd 2.27
In 2.16 Hg 2.07
18 VIIA
3.5 Structure Page 32 Wednesday, December 31, 1969 17:00
Structural Properties
Table 12. CARBON BOND (SHEET 1 OF 3)
LENGTHS
Group No.
Element.
At. No.
Sym.
1 2
Hydrogen Beryllium
1 4
H Be
1.056 1.93
± 1.115
6
Chromium Molybdenum Tungsten
24 42 74
Cr Mo W
1.92 2.08 2.06
± 0.04 ± 0.04 ± 0.01
8 9 10
Iron Cobalt Nickel Palladium Mercury
26 27 28 46 80
Fe Co Ni Pd Hg
1.94 1.93 1.82 2.27 2 .07
± 0.02 ± 0.02 ± 0.03 ± 0.04 ± 0.01
13
Aluminum Boron Indium
13 5 49
Al B In
2.24 1. 56 2.16
± 0.04 ± 0.01 ± 0.04
14
Carbon Germanium Lead Silicon
6 32 82 14
C Ge Pb Si
1.20 1.98 2.29 1.865 1.84
± 1.54 ± 0.03 ± 0.05 ± 0.008 ± 0.01
1.88
± 0.01
2.143
± 0.008
2.18
± 0.02
1.98 2.30 1 .47 1.87 2.202
± 0.02
12
Tin
15
Arsenic Bismuth Nitrogen Phosphorus Antimony
50
33 83 7 15 51
Sn
As Bi N P Sb
Bond Length (Å)
± 1.1 ± 0.02 ± 0.016
Bond Type
Alkyls (CH3XH3) Alkyls (CH3XH3) Alkyls (CH3XH3) Alkyls (CH3XH3) Aryls (C6H5XH3) Neg. Subst. (CH3XCI3) Alkyls (CH3XH3) Neg. Subst. (CH3XCI3) Paraffinic (CH3)3X Paraffinic (CH3)3X Paraffinic (CH3)3X Paraffinic (CH3)3X
Source: data from Lide, David R., Ed., CRC Handbook of Chemistry and Physics, CRC Press, Boca Raton, (1990); and “Tables of interatomic distances” Chem. Soc. of London, 1958.
©2001 CRC Press LLC
32
CRC Handbook of Materials Science & Engineering
3.5 Structure Page 33 Wednesday, December 31, 1969 17:00
Structural Properties
Table 12. CARBON BOND (SHEET 2 OF 3) Group No.
LENGTHS
Element.
At. No.
Sym.
16
Oxygen Sulfur Selenium Tellurium
8 16 34 52
O S Se Te
1.43 1.81 1 .98 2.05
± 1.15 ± 1.55 ± 1.71 ± 0.14
17
Bromine
35
Br
1.937
± 0.003
Paraffinic (mono. substituted) (CH3X)
Br
1.937
± 0.003
Paraffinic (disubstituted) (CH2X2)
Br
1.89 1.85 1.79
± 0.01 ± 0.01 ± 0.01
Olfinic(CH2:CHX) Aromatic (C6H3X) Acetylenic (HC:CX)
Cl
1.767
± 0.002
Paraffinic (mono. substituted) (CH3X)
Cl
1.767
± 0.002
Paraffinic (disubstituted) (CH2X2)
Cl
1.72 1.70 1.79
± 0.01 ± 0.01 ± 0.01
Olfinic(CH2:CHX) Aromatic (C6H3X) Acetylenic (HC:CX)
F
1.831
± 0.005
Paraffinic (mono. substituted) (CH3X)
F
1.334
± 0.004
Paraffinic (disubstituted) (CH2X2)
Chlorine
Fluorine
17
9
Bond Length (Å)
Bond Type
Source: data from Lide, David R., Ed., CRC Handbook of Chemistry and Physics, CRC Press, Boca Raton, (1990); and “Tables of interatomic distances” Chem. Soc. of London, 1958.
©2001 CRC Press LLC Shackelford & Alexander
33
3.5 Structure Page 34 Wednesday, December 31, 1969 17:00
Structural Properties
Table 12. CARBON BOND (SHEET 3 OF 3) Group No.
Element.
At. No.
Fluorine con’t
Iodine
Sym.
Bond Length (Å)
Bond Type
1.325
± 0.1
Olfinic(CH2:CHX)
1.30 1.635
± 0.01 ± 0.004
Aromatic (C6H3X) Acetylenic (HC:CX)
I
2.13
± 0.1
Paraffinic (mono. substituted) (CH3X)
I
2.13
± 0.1
Paraffinic (disubstituted) (CH2X2)
I
2.092 2.05 1.99
± 0.005 ± 0.01 ± 0.02
Olfinic(CH2:CHX) Aromatic (C6H3X) Acetylenic (HC:CX)
F
53
LENGTHS
Source: data from Lide, David R., Ed., CRC Handbook of Chemistry and Physics, CRC Press, Boca Raton, (1990); and “Tables of interatomic distances” Chem. Soc. of London, 1958.
Table 13. CARBON
BOND LENGTHS IN POLYMERS (SHEET 1 OF 3)
Bond Type
Polymer Type
Bond Length (Å)
CARBONCARBON Single Bond
Paraffinic In diamond (18˚C)
1.541 1.54452
± 0.003 ± 0.00014
Source: data from CRC Handbook of Chemistry and Physics, David R. Lide, Ed., CRC Press, Boca Raton, (1990) and “Tables of interatomic distances” Chem. Soc. of London, (1958).
©2001 CRC Press LLC
34
CRC Handbook of Materials Science & Engineering
3.5 Structure Page 35 Wednesday, December 31, 1969 17:00
Structural Properties
Table 13. CARBON
BOND LENGTHS IN POLYMERS (SHEET 2 OF 3)
Bond Type
Polymer Type
Bond Length (Å)
CARBONCARBON cont’t Partial Double Bond
Double Bonds
Triple Bond
(1) Shortening of single bond in presence of carbon carbon double bond, e.g. (CH2),C3CH2; or of aromatic ring e.g. C6H5 CH3
1.53
± 0.01
(2) Shortening in presence of a carbon oxygen double bond e.g. CH3CHO
1.516
± 0.005
(3) Shortening in presence of two carbon oxygen double bonds, e.g. (CO2H)2
1.49
± 0.01
(4) Shortening in presence of a carbon oxygen triple bond, e.g. CH3C:CH
1.460
± 0.003
(5) In compounds with tendency to dipole formation, e.g. C:C.C:N
1.44
± 0.01
(6) In graphite(at 15 ˚C)
1.4210
± 0.0001
(7) In aromatic compounds
1.395
± 0.003
(8) in presence of a carbon carbon triple bonds, e.g. HC=C-C=CH
1.373
± 0.004
(1) simple
1.337
± 0.006
(2) Part triple bond, e.g. CH2:C:CH2
1.309
± 0.005
(1) Simple, e.g. C2H2
1.204
± 0.002
(2) Conjugated, e.g. CH3.(C:C)2.H e.g. C5H5N
1.206
± 0.004
Source: data from CRC Handbook of Chemistry and Physics, David R. Lide, Ed., CRC Press, Boca Raton, (1990) and “Tables of interatomic distances” Chem. Soc. of London, (1958).
©2001 CRC Press LLC Shackelford & Alexander
35
3.5 Structure Page 36 Wednesday, December 31, 1969 17:00
Structural Properties
Table 13. CARBON
BOND LENGTHS IN POLYMERS (SHEET 3 OF 3)
Bond Type CARBONHYDROGEN
CARBONNITROGEN Single Bond
Triple Bond
Polymer Type
Bond Length (Å)
(1) Paraffinic (a) in methane (b) in monosubstituted carbon (c) in disubstituted carbon (d) in trisubstituted carbon
1.091 1.101 1.073 1.070
(2) Olefinic, c.g. CH2:CH2
1.07
± 0.01
(3) Aromatic in C6H6
1.094
± 0.006
(4) Acetylenic, e.g. CH2:C.X
1.056
± 0.003
(5) Shortening in presence of a carbon oxygen triple bond, e.g.CH3CN
1.115
± 0.004
(6) In small rings, e.g. (CH2)2S
1.081
± 0.007
(1) Paraffinic (a) 4 co-valent nitrogen (b) 3 co-valent nitrogen
1.479 1.472
(2) in C-N= e.g. CH3NO2
1.475
± 0.010
(3) Aromatic in C6H5NHCOCH3
1.426
± 0.012
(4) Shortened (partial double bond) in h.heterocyclic systems,
1.352
± 0.005
(5) Shortened (partial double bond) in NC=O e.g. HCONH2
1.322
± 0.003
(1) in R.C:N
1.158
± 0.002
Source: data from CRC Handbook of Chemistry and Physics, David R. Lide, Ed., CRC Press, Boca Raton, (1990) and “Tables of interatomic distances” Chem. Soc. of London, (1958).
©2001 CRC Press LLC
36
CRC Handbook of Materials Science & Engineering
3.5 Structure Page 37 Wednesday, December 31, 1969 17:00
Structural Properties
Table 14. BOND
ANGLE VALUES BETWEEN ELEMENTS
Element
Bond
Compound
Bond angle (°)
B B B B B
H–B–H Br–B–Br Cl– B–Cl F–B–F O–B–O
B2H6 BBr3 BCl3 BF3 B(OH)3
121.5 120 120 120 119.7
N N N N N N
B–N–B F–N–F H–N–C H–N–N’ O–N–O O–N–O
(BClNH)3 NF3 HNCS N3H NO2Cl NO2
O
O–O–H
S S S
Br–S–Br F–S–F O–S–O
± ± ±
7.5 6 3
121 102.5 130.25 112.65 126 134.1
± ± ± ± ±
1.5 0.25 0.5 2 0.25
H2O2
100
±
2
SOBr2 SOF2 SO2
96 92.8 119.54
± ±
2 1
Source: Kennard, O., in Handbook of Chemistry and Physics, 69th ed., Weast, R. C., Ed., CRC Press, Boca Raton, Fla., 1988, F–167.
©2001 CRC Press LLC Shackelford & Alexander
37
3.5 Structure Page 38 Wednesday, December 31, 1969 17:00
Structural Properties
Table 15. KEY TO
TABLES OF CRYSTAL STRUCTURE OF THE ELEMENTS Table Number
Page Number
The Seven Crystal Systems The Fourteen Bravais Lattices
Table 16 Table 17
Page 39 Page 40
Periodic Table of the Body Centered Cubic Elements Periodic Table of the Face Centered Cubic Elements Periodic Table of the Hexagonal Close Packed Elements Periodic Table of the Hexagonal Elements
Table 18 Table 19 Table 20 Table 21
Page 41 Page 42 Page 43 Page 44
Table Title
©2001 CRC Press LLC
38
CRC Handbook of Materials Science & Engineering
3.5 Structure Page 39 Wednesday, December 31, 1969 17:00
Structural Properties
Table 16. THE
System
SEVEN CRYSTAL SYSTEMS
Axial Lengths and Angles
Unit Cell Geometry
Source: James F. Shackelford, Introduction to Materials Science for Engineers, 4th ed., Prentice-Hall, Upper Saddle River, NJ, 1996.
©2001 CRC Press LLC Shackelford & Alexander
39
3.5 Structure Page 40 Wednesday, December 31, 1969 17:00
Structural Properties
Table 17. THE
FOURTEEN BRAVAIS LATTICES
Source: James F. Shackelford, Introduction to Materials Science for Engineers, 4th ed., Prentice-Hall, Upper Saddle River, NJ, 1996.
©2001 CRC Press LLC
40
CRC Handbook of Materials Science & Engineering
3.6 Structure L Page 41 Wednesday, December 31, 1969 17:00
Table 18. PERIODIC 1 IA
2
3
4
5
6
TABLE OF THE BODY CENTERED CUBIC ELEMENTS 7
8
9
10
11
12
IIA 3 Li 11 Na
IIIB
VB
VIB
VIIB
-----
19 K
23 V
24 Cr
25 Mn
26 Fe
37 Rb
41 Nb
42 Mo
73 Ta
74 W
55 Cs
56 Ba
87 Fr
88 Ra
IVB
63 Eu
©2001 CRC Press LLC
VIII
-----
IB
IIB
13
14
15
16
17
IIIA
IVA
VA
VIA
VIIA
18 VIIA
3.6 Structure L Page 42 Wednesday, December 31, 1969 17:00
Table 19. PERIODIC 1 IA
2
3
4
5
6
TABLE OF THE FACE CENTERED CUBIC ELEMENTS 7
8
9
10
11
12
IIA
13
14
15
16
17
IIIA
IVA
VA
VIA
VIIA
18 VIIA
10 Ne IIIB
IVB
VB
VIB
VIIB
-----
VIII
-----
IB
28 Ni
29 Cu
45 Rh
46 Pd
47 Ag
77 Ir
78 Pt
79 Au
20 Ca 38 Sr
57 La 89 Ac
©2001 CRC Press LLC
IIB
13 Al
14 Si
18 Ar
32 Ge
36 Kr 54 Xe
82 Pb
86 Rn
3.6 Structure L Page 43 Wednesday, December 31, 1969 17:00
Table 20. PERIODIC 1 IA
2
3
4
5
6
TABLE OF THE HEXAGONAL CLOSE PACKED ELEMENTS 7
8
9
10
11
12
IIA
13
14
15
16
17
IIIA
IVA
VA
VIA
VIIA
4 Be 12 Mg
IIIB
IVB
VB
VIB
VIIB
-----
22 Ti 39 Y
VIII
IB
27 Co
40 Zr
43 Tc
44 Ru
72 Hf
75 Re
76 Os
IIB 30 Zn 48 Cd 81 Tl
64 Gd
©2001 CRC Press LLC
-----
65 Tb
66 Dy
67 Ho
68 Er
69 Tm
71 Lu
18 VIIA
3.6 Structure L Page 44 Wednesday, December 31, 1969 17:00
Table 21. PERIODIC 1 IA
2
3
4
5
6
7
TABLE OF THE HEXAGONAL ELEMENTS 8
9
10
11
12
IIA
13
14
15
16
17
IIIA
IVA
VA
VIA
VIIA
6 C IIIB
IVB
VB
VIB
VIIB
-----
VIII
-----
IB
IIB 34 Se 52 Te
57 La
59 Pr
60 Nd
61 Pm 95 Am
©2001 CRC Press LLC
96 Cm
97 Bk
18 VIIA
3.7 Structure Page 45 Wednesday, December 31, 1969 17:00
Structural Properties
Table 22. STRUCTURE OF (SHEET 1 OF 6) Ceramic
CERAMICS
Structure
Borides Chromium Diboride (CrB2)
hexagonal, AlB2 structure (C-32 type) isomorphous with other transition metal diborides a=2.969Å; c=3.066Å; c/a=1.03
Hafnium Diboride (HfB2)
hexagonal, AlB2 structure (C-32 type) isomorphous with TiB2 and ZrB2 a=3.141 ± 0.002 Å; c=3.470 ± 0.002 Å; c/a=1.105
Tantalum Diboride (TaB2)
hexagonal, AlB2 structure (C-32 type) isomorphous with other transition metal diborides a=3.078-3.088Å; c=3.241-3.265Å; c/a=1.06-1.074 low boron composition (64 atom % boron) a=3.097-3.099Å; c=3.244-3.277Å high boron composition :(72 atom % boron) a=3.057-3.060Å; c=3.291-3.290Å
Titanium Diboride (TiB2)
Zirconium Diboride (ZrB2)
hexagonal, AlB2 structure (C-32 type) isomorphous with ZrB2 a=3.028-3.030Å; c=3.227-3.228Å; c/a=1.064 hexagonal, AlB2 structure (C-32 type) isomorphous with TiB2 a=3.1694-3.170Å; c=3.528-3.5365Å; c/a=1.114
Carbides Boron Carbide (B4C)
rhombic, C3 chains and B12 icosahedral in a NaCl structure, extended along a body diagonal
To convert Å to nm, multiply by 10-1. Source: Data compiled by J.S. Park from No. 1 Materials Index, Peter T.B. Shaffer, Plenum Press, New York, (1964); Smithells Metals Reference Book, Eric A. Brandes, ed., in association with Fulmer Research Institute Ltd. 6th ed. London, Butterworths, Boston, (1983); and Ceramic Source, American Ceramic Society (1986-1991).
©2001 CRC Press LLC Shackelford & Alexander
45
3.7 Structure Page 46 Wednesday, December 31, 1969 17:00
Structural Properties
Table 22. STRUCTURE OF (SHEET 2 OF 6) Ceramic Hafnium Monocarbide (HfC)
CERAMICS
Structure
FCC(B1), NaCl type isomorphous with HfB and HfN a=4.46-4.643Å
Silicon Carbide (SiC)
low temperature form (β) cubic high temperature form (α) hexagonal β-SiC F43m space group a=4.349-4.358Å α-SiC C6MC space group a=3.073Å; c=15.07Å; c/a=4.899
Tantalum Monocarbide (TaC)
FCC, NaCl type (B1) a=4.42-4.456Å
Titanium Monocarbide (TiC)
FCC, NaCl type (B1) isomorphous with TiO and TiN a=4.315-4.3316Å
Trichromium Dicarbide (Cr3C2)
orthorhombic D510 type a=2.82Å, b=5.53Å, c=11.47Å
Tungsten Monocarbide (WC)
Hexagonal a=2.2897-2.90Å
To convert Å to nm, multiply by 10-1. Source: Data compiled by J.S. Park from No. 1 Materials Index, Peter T.B. Shaffer, Plenum Press, New York, (1964); Smithells Metals Reference Book, Eric A. Brandes, ed., in association with Fulmer Research Institute Ltd. 6th ed. London, Butterworths, Boston, (1983); and Ceramic Source, American Ceramic Society (1986-1991).
©2001 CRC Press LLC
46
CRC Handbook of Materials Science & Engineering
3.7 Structure Page 47 Wednesday, December 31, 1969 17:00
Structural Properties
Table 22. STRUCTURE OF (SHEET 3 OF 6) Ceramic Zirconium Monocarbide (ZrC)
CERAMICS
Structure
FCC(B1), NaCl type isomorphous with ZrB and ZrN a=4.669-4.694Å
Nitrides Aluminum Nitride (AlN)
hexagonal, Wurtzite structure a=3.10-3.114Å; c=4.96-4.981Å
Boron Nitride (BN)
hexagonal (common type) graphite type structure a=2.5038±0.0001Å; c=6.60±0.01Å B-N distance 1.45Å cubic zinc blende structure a=3.615Å B-N distance 1.57Å
Titanium Mononitride (TiN)
cubic a=4.23Å homogeneity range: TiN0.42-TiN1.16 yields a=4.213 to 4.24Å
Trisilicon tetranitride (Si3N4)
α hexagonal a=7.748-7.758Å; c=5.617-5.623Å β hexagonal a=7.608Å; c=2.911Å
To convert Å to nm, multiply by 10-1. Source: Data compiled by J.S. Park from No. 1 Materials Index, Peter T.B. Shaffer, Plenum Press, New York, (1964); Smithells Metals Reference Book, Eric A. Brandes, ed., in association with Fulmer Research Institute Ltd. 6th ed. London, Butterworths, Boston, (1983); and Ceramic Source, American Ceramic Society (1986-1991).
©2001 CRC Press LLC Shackelford & Alexander
47
3.7 Structure Page 48 Wednesday, December 31, 1969 17:00
Structural Properties
Table 22. STRUCTURE OF (SHEET 4 OF 6) Ceramic Zirconium Mononitride (ZrN)
CERAMICS
Structure
cubic, NaCl type, B1 a=4.567-4.63Å
Oxides Aluminum Oxide (Al2O3)
hexagonal a=4.785Å; c=12.991Å; c/a=2.72
Beryllium Oxide (BeO)
hexagonal a=2.690-2.698Å; c=4.370-4.380Å
Calcium Oxide (CaO)
cubic, NaCl type a=4.8105Å
Cerium Dioxide (CeO2)
cubic
Dichromium Trioxide (Cr2O3)
trigonal rhombic
Hafnium Dioxide (HfO2)
monoclinic to 1700 °C tetragonal above 1700 °C a=5.1170Å; b=5.1754Å; c=5.2915Å β = 99.216o
Magnesium Oxide (MgO)
cubic, Fm3m space group a=4.313Å
Nickel monoxide (NiO)
face centered cubic, NaCl type
Silicon Dioxide (SiO2)
hexagonal
To convert Å to nm, multiply by 10-1. Source: Data compiled by J.S. Park from No. 1 Materials Index, Peter T.B. Shaffer, Plenum Press, New York, (1964); Smithells Metals Reference Book, Eric A. Brandes, ed., in association with Fulmer Research Institute Ltd. 6th ed. London, Butterworths, Boston, (1983); and Ceramic Source, American Ceramic Society (1986-1991).
©2001 CRC Press LLC
48
CRC Handbook of Materials Science & Engineering
3.7 Structure Page 49 Wednesday, December 31, 1969 17:00
Structural Properties
Table 22. STRUCTURE OF (SHEET 5 OF 6) Ceramic
CERAMICS
Structure
Thorium Dioxide (ThO2)
cubic, fluorite type a=5.59525-5.5997Å
Titanium Oxide (TiO2)
tetragonal (rutile) a=4.594Å; c=2.958Å at 26 °C tetragonal (anatase) rhombic (brookite)
Uranium Dioxide (UO2)
cubic, fluorite type a=5.471Å
Zircoium Oxide (ZrO2)
to 1050 °C monoclinic a=5.1505Å; b=5.2031Å; c=5.3154 β=99.194o at room temp. 1050—2100˚C tetragonal above 2100˚C cubic (stabilized) a=5.132±0.006Å (8.13 mol% Y2O3) a=5.145±0.006Å (11.09 mol% Y2O3) a=5.146±0.006Å (12.08 mol% Y2O3) a=5.153±0.006Å (15.52 mol% Y2O3) a=5.162±0.006Å (17.88 mol% Y2O3)
Cordierite (2MgO 2Al2O3 5SiO2)
0rthorhombic
Mullite (3Al2O3 2SiO2)
0rthorhombic a=7.54±0.03Å; b=7.693±0.03Å;c=2.890±0.01
Sillimanite (Al2O3 SiO2)
0rthorhombic
To convert Å to nm, multiply by 10-1. Source: Data compiled by J.S. Park from No. 1 Materials Index, Peter T.B. Shaffer, Plenum Press, New York, (1964); Smithells Metals Reference Book, Eric A. Brandes, ed., in association with Fulmer Research Institute Ltd. 6th ed. London, Butterworths, Boston, (1983); and Ceramic Source, American Ceramic Society (1986-1991).
©2001 CRC Press LLC
Shackelford & Alexander
49
3.7 Structure Page 50 Wednesday, December 31, 1969 17:00
Structural Properties
Table 22. STRUCTURE OF (SHEET 6 OF 6) Ceramic Spinel (Al2O3 MgO)
CERAMICS
Structure
cubic a=8.0844Å
Silicides Molybdenum Disilicide (MoSi2) tetragonal, D4h17 space group isomorphous with WSi2 a=3.197-3.20Å; c=7.85-7.871 Tungsten Disilicide (WSi2)
tetragonal, D4h17 space group isomorphous with MoSi2 a=3.212±0.005Å; c=7.880±0.005
To convert Å to nm, multiply by 10-1. Source: Data compiled by J.S. Park from No. 1 Materials Index, Peter T.B. Shaffer, Plenum Press, New York, (1964); Smithells Metals Reference Book, Eric A. Brandes, ed., in association with Fulmer Research Institute Ltd. 6th ed. London, Butterworths, Boston, (1983); and Ceramic Source, American Ceramic Society (1986-1991).
©2001 CRC Press LLC
50
CRC Handbook of Materials Science & Engineering
3.7 Structure Page 51 Wednesday, December 31, 1969 17:00
Structural Properties
Table 23. ATOMIC
MASS OF SELECTED ELEMENTS (SHEET 1 OF 4)
At omic Number
Element
Symbol
Atomic Mass
1 2 3 4
Hydrogen Helium Lithium Beryllium
H He Li Be
1.008 4.003 6.941 9.012
5 6 7 8
Boron Carbon Nitrogen Oxygen
B C N O
10.81 12.01 14.01 16.00
9 10 11 12
Fluorine Neon Sodium Magnesium
F N Na Mg
19.00 20.18 22.99 24.31
13 14 15
Aluminum Silicon Phosphorus (White)
Al Si P
26.98 28.09 30.97
16 17 18 19
Sulfur Chlorine Argon Potassium
S Cl Ar K
32.06 35.45 39.95 39.1
20 21 22 23
Calcium Scandium Titanium Vanadium
Ca Sc Ti V
40.08 44.96 47.9 50.94
24 25 26 27
Chromium Manganese Iron Cobalt
Cr Mn Fe Co
52.00 54.94 55.85 58.93
Source: data from James F. Shackelford, Introduction to Materials Science for Engineers, Second Edition, Macmillian Publishing Company, New York, pp.686-688, (1988).
©2001 CRC Press LLC Shackelford & Alexander
51
3.7 Structure Page 52 Wednesday, December 31, 1969 17:00
Structural Properties
Table 23. ATOMIC
MASS OF SELECTED ELEMENTS (SHEET 2 OF 4)
At omic Number
Element
Symbol
Atomic Mass
28 29 30 31
Nickel Copper Zinc Gallium
Ni Cu Zn Ga
58.71 63.55 65.38 69.72
32 33 34 35
Germanium Arsenic Selenium Bromine
Ge As Se Br
72.59 74.92 78.96 79.9
36 37 38 39
Krypton Rubidium Strontium Yttrium
Kr Rb Sr Y
83.8 85.47 87.62 88.91
40 41 42 43
Zirconium Niobium Molybdenum Technetium
Zr Nb Mo Tc
91.22 92.91 95.94 98.91
44 45 46 47
Ruthenium Rhodium Palladium Silver
Ru Rh Pd Ag
101.07 102.91 106.4 107.87
48 49 50 51
Cadmium Indium Tin Antimony
Cd In Sn Sb
112.4 114.82 118.69 121.75
52 53 54 55
Tellurium Iodine Xenon Cesium (-10˚)
Te I Xe Ce
127.6 126.9 131.3 132.91
Source: data from James F. Shackelford, Introduction to Materials Science for Engineers, Second Edition, Macmillian Publishing Company, New York, pp.686-688, (1988).
©2001 CRC Press LLC
52
CRC Handbook of Materials Science & Engineering
3.7 Structure Page 53 Wednesday, December 31, 1969 17:00
Structural Properties
Table 23. ATOMIC
MASS OF SELECTED ELEMENTS (SHEET 3 OF 4)
At omic Number
Element
Symbol
Atomic Mass
56 57 58 59
Barium Lantium Cerium Praseodymium
Ba La Ce Pr
137.33 138.91 140.12 140.91
60 61 62 63
Neodymium Promethium Samarium Europium
Nd Pm Sm Eu
144.24 (145) 150.4 151.96
64 65 66 67
Gadolinium Terbium Dysprosium Holmium
Gd Tb Dy Ho
157.25 158.93 162.5 164.93
68 69 70 71
Erbium Thulium Ytterbium Lutetium
Er Tm Yb Lu
167.26 168.93 173.04 174.97
72 73 74 75
Hafnium Tantalum Tungsten Rhenium
Hf Ta W Re
178.49 180.95 183.85 186.2
76 77 78 79
Osmium Iridium Platinum Gold
Os Ir Pt Au
190.2 192.22 195.09 196.97
80 81 82 83
Mercury Thallium Lead Bismuth
Hg Tl Pb Bi
200.59 204.37 207.2 208.98
Source: data from James F. Shackelford, Introduction to Materials Science for Engineers, Second Edition, Macmillian Publishing Company, New York, pp.686-688, (1988).
©2001 CRC Press LLC Shackelford & Alexander
53
3.7 Structure Page 54 Wednesday, December 31, 1969 17:00
Structural Properties
Table 23. ATOMIC
MASS OF SELECTED ELEMENTS (SHEET 4 OF 4)
At omic Number
Element
Symbol
Atomic Mass
84 85 86 87
Polonium Asatine Radon Francium
Po At Rn Fr
(~210) (210) (222) (223)
88 89 90 91
Radium Actinium Thorium Protoactinium
Ra Ac Th Pa
226.03 (227) 232.04 231.04
92 93 94 95
Uranium Neptunium Plutonium Americium
U Np Pu Am
238.03 237.05 (244) (243)
96 97 98 99
Curium Berkelium Californium Einsteinium
Cm Bk Cf Es
(247) (247) (251) (254)
100 101 102 103
Fermium Mendelevium Nobelium Lawrencium
Fm Md No Lw
(257) (258) (259) (260)
Source: data from James F. Shackelford, Introduction to Materials Science for Engineers, Second Edition, Macmillian Publishing Company, New York, pp.686-688, (1988).
©2001 CRC Press LLC
54
CRC Handbook of Materials Science & Engineering
3.7 Structure Page 55 Wednesday, December 31, 1969 17:00
Structural Properties
Table 24. SOLID
DENSITY OF SELECTED ELEMENTS (SHEET 1 OF 3)
Atomic Number
Element
Symbol
Solid Density (Mg/m3)
3 4 5 6
Lithium Beryllium Boron Carbon
Li Be B C
0.533 1.85 2.47 2.27
11 12 13 14 zz 15 16 19 20
Sodium Magnesium Aluminum Silicon
Na Mg Al Si
0.966 1.74 2.7 2.33
Phosphorus (White) Sulfur Potassium Calcium
P S K Ca
1.82 2.09 0.862 1.53
21 22 23 24
Scandium Titanium Vanadium Chromium
Sc Ti V Cr
2.99 4.51 6.09 7.19
25 26 27 28
Manganese Iron Cobalt Nickel
Mn Fe Co Ni
7.47 7.87 8.8 8.91
29 30 31 32
Copper Zinc Gallium Germanium
Cu Zn Ga Ge
8.93 7.13 5.91 5.32
33 34 37 38
Arsenic Selenium Rubidium Strontium
As Se Rb Sr
5.78 4.81 1.53 2.58
Source: data from James F. Shackelford, Introduction to Materials Science for Engineers, Second Edition, Macmillian Publishing Company, New York, pp.686688, (1988).
©2001 CRC Press LLC Shackelford & Alexander
55
3.7 Structure Page 56 Wednesday, December 31, 1969 17:00
Structural Properties
Table 24. SOLID
DENSITY OF SELECTED ELEMENTS (SHEET 2 OF 3)
Atomic Number
Element
Symbol
Solid Density (Mg/m3)
39 40 41 42
Yttrium Zirconium Niobium Molybdenum
Y Zr Nb Mo
4.48 6.51 8.58 10.22
43 44 45 46
Technetium Ruthenium Rhodium Palladium
Tc Ru Rh Pd
11.5 12.36 12.42 12.00
47 48 49 50
Silver Cadmium Indium Tin
Ag Cd In Sn
10.50 8.65 7.29 7.29
51 52 53 55
Antimony Tellurium Iodine Cesium (-10˚)
Sb Te I Ce
6.69 6.25 4.95 1.91
56 57 58 59
Barium Lantium Cerium Praseodymium
Ba La Ce Pr
3.59 6.17 6.77 6.78
60 62 63 64
Neodymium Samarium Europium Gadolinium
Nd Sm Eu Gd
7.00 7.54 5.25 7.87
65 66 67 68
Terbium Dysprosium Holmium Erbium
Tb Dy Ho Er
8.27 8.53 8.80 9.04
Source: data from James F. Shackelford, Introduction to Materials Science for Engineers, Second Edition, Macmillian Publishing Company, New York, pp.686688, (1988).
©2001 CRC Press LLC
56
CRC Handbook of Materials Science & Engineering
3.7 Structure Page 57 Wednesday, December 31, 1969 17:00
Structural Properties
Table 24. SOLID
DENSITY OF SELECTED ELEMENTS (SHEET 3 OF 3)
Atomic Number
Element
Symbol
Solid Density (Mg/m3)
69 70 71 72
Thulium Ytterbium Lutetium Hafnium
Tm Yb Lu Hf
9.33 6.97 9.84 13.28
73 74 75 76
Tantalum Tungsten Rhenium Osmium
Ta W Re Os
16.67 19.25 21.02 22.58
77 78 79 81
Iridium Platinum Gold Thallium
Ir Pt Au Tl
22.55 21.44 19.28 11.87
82 83 84 90
Lead Bismuth Polonium Thorium
Pb Bi Po Th
11.34 9.80 9.2 11.72
92 94
Uranium Plutonium
U Pu
19.05 19.81
Source: data from James F. Shackelford, Introduction to Materials Science for Engineers, Second Edition, Macmillian Publishing Company, New York, pp.686688, (1988).
©2001 CRC Press LLC Shackelford & Alexander
57
3.7 Structure Page 58 Wednesday, December 31, 1969 17:00
Structural Properties
Table 25. DENSITY OF IRON AND IRON (SHEET 1 OF 2)
ALLOYS
Class
Metal or Alloy
Density g/cm3
Iron and Iron Alloys
Pure iron Ingot iron Wrought iron Gray cast iron
7.874 7.866 7.7 7.15
Malleable iron 0.06% C steel 0.23% C steel
7.27 7.871 7.859
0.435% C steel 1.22% C steel
7.844 7.830
0.5% Mo steel 1Cr-0.5Mo steel 1.25Cr-0.5Mo steel 2.25Cr-1.0Mo steel
7.86 7.86 7.86 7.86
5Cr-0.5Mo steel 7Cr-0.5Mo steel 9Cr-1Mo steel
7.78 7.78 7.67
Medium-carbon alloy steels
1Cr-0.35Mo-0.25V steel H11 die steel (5Cr-1.5Mo-0.4V)
7.86 7.79
Other Iron-base alloys
A-286 16-25-6 alloy RA-330 Incoloy
7.94 8.08 8.03 8.02
Low-carbon chromiummolybdenum steels
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p152 (1993).
©2001 CRC Press LLC
58
CRC Handbook of Materials Science & Engineering
3.7 Structure Page 59 Wednesday, December 31, 1969 17:00
Structural Properties
Table 25. DENSITY OF IRON AND IRON (SHEET 2 OF 2)
ALLOYS
Class
Metal or Alloy
Density g/cm3
Other Iron-base alloys (Con’t)
Incoloy T Incoloy 901 T1 tool steel M2 tool steel
7.98 8.23 8.67 8.16
H41 tool steel 20W-4Cr-2V-12Co steel Invar (36% Ni) Hipernik (50% Ni)
7.88 8.89 8.00 8.25
4% Si 10.27%Si Si
7.6 6.97
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p152 (1993).
©2001 CRC Press LLC Shackelford & Alexander
59
3.7 Structure Page 60 Wednesday, December 31, 1969 17:00
Structural Properties
Table 26. DENSITY OF
WROUGHT STAINLESS STEELS * (SHEET 1 OF 2) Type
UNS Designation
Density (Mg/m3)
201 202 205 301
S20100 S20200 S20500 S30100
7.8 7.8 7.8 8.0
302 302B 303 304
S30200 S30215 S30300 S30400
8.0 8.0 8.0 8.0
304L S30430 304N 305
S30403 S30430 S30451 S30500
8.0 8.0 8.0 8.0
308 309 310 314
S30800 S30900 S31000 S31400
8.0 8.0 8.0 7.8
316 316L 316N 317
S31600 S31603 S31651 S31700
8.0 8.0 8.0 8.0
317L 321 329 330
S31703 S32100 S32900 N08330
8.0 8.0 7.8 8.0
347 384 405 409
S34700 S38400 S40500 S40900
8.0 8.0 7.8 7.8
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p360, (1993).
©2001 CRC Press LLC
60
CRC Handbook of Materials Science & Engineering
3.7 Structure Page 61 Wednesday, December 31, 1969 17:00
Structural Properties
Table 26. DENSITY OF
WROUGHT STAINLESS STEELS * (SHEET 2 OF 2) Type
UNS Designation
Density (Mg/m3)
410 414 416 420
S41000 S41400 S41600 S42000
7.8 7.8 7.8 7.8
422 429 430 430F
S42200 S42900 S43000 S43020
7.8 7.8 7.8 7.8
431 434 436 440A
S43100 S43400 S43600 S44002
7.8 7.8 7.8 7.8
440C 444 446 PH 13–8 Mo
S44004 S44400 S44600 S13800
7.8 7.8 7.5 7.8
15–5 PH 17–4 PH 17–7 PH
S15500 S17400 S17700
7.8 7.8 7.8
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p360, (1993). *
Annealed Condition.
©2001 CRC Press LLC
Shackelford & Alexander
61
3.7 Structure Page 62 Wednesday, December 31, 1969 17:00
Structural Properties
Table 27. DENSITY OF
STAINLESS STEELS AND HEAT-RESISTANT ALLOYS (SHEET 1 OF 3) Class
Metal or Alloy
Density g/cm3
Corrrosion-resistant steel castings
CA-15 CA-40 CB-30 CC-50
7.612 7.612 7.53 7.53
CE-30 CF-8 CF-20 CF-8M, CF-12M
7.67 7.75 7.75 7.75
CF-8C CF-16F CH-20 CK-20
7.75 7.75 7.72 7.75
CN-7M
8.00
HA HC HD HE
7.72 7.53 7.58 7.67
HF HH HI HK
7.75 7.72 7.72 7.75
HL HN HT HU
7.72 7.83 7.92 8.04
HW HX
8.14 8.14
Heat resistant alloy castings
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p152-153 (1993).
©2001 CRC Press LLC
62
CRC Handbook of Materials Science & Engineering
3.7 Structure Page 63 Wednesday, December 31, 1969 17:00
Structural Properties
Table 27. DENSITY OF
STAINLESS STEELS AND HEAT-RESISTANT ALLOYS (SHEET 2 OF 3) Class
Metal or Alloy
Density g/cm3
Wrought stainless and heat-resisting steels
Type 301
7.9
Type 302 Type 302B Type 303
7.9 8.0 7.9
Type 304 Type 305 Type 308 Type 309
7.9 8.0 8.0 7.9
Type 310 Type 314 Type 316 Type 317
7.9 7.72 8.0 8.0
Type 321 Type 347 Type 403 Type 405
7.9 8.0 7.7 7.7
Type 410 Type 416 Type 420 Type 430
7.7 7.7 7.7 7.7
Type 430F Type 431 Types 440A, 440B, 440C Type 446
7.7 7.7 7.7 7.6
Type 501 Type 502 19-9DL
7.7 7.8 7.97
PH15-7 Mo 17-4 PH 17-7 PH
7.804 7.8 7.81
precipitation-hardening stainless steels
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p152-153 (1993).
©2001 CRC Press LLC Shackelford & Alexander
63
3.7 Structure Page 64 Wednesday, December 31, 1969 17:00
Structural Properties
Table 27. DENSITY OF
STAINLESS STEELS AND HEAT-RESISTANT ALLOYS (SHEET 3 OF 3) Class
Metal or Alloy
Density g/cm3
Nickel-base alloys
D-979 Nimonic 80A Nimonic 90 M-252
8.27 8.25 8.27 8.27
Inconel Inconel "x" 550 Inconel 700 Inconel "713C"
8.51 8.30 8.17 7.913
Waspaloy René 41 Hastelloy alloy B Hastelloy alloy C
8.23 8.27 9.24 8.94
Hastelloy alloy X Udimet 500 GMR-235
8.23 8.07 8.03
Cobalt-chromium-nickel-base alloys
N-155 (HS-95) S-590
8.23 8.36
Cobalt-base alloys
S-816 V-36 HS-25 HS-36
8.68 8.60 9.13 9.04
HS-31 HS-21
8.61 8.30
Mo-0.5Ti
10.2
Molybdenmun-base alloy
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p152-153 (1993).
©2001 CRC Press LLC
64
CRC Handbook of Materials Science & Engineering
3.7 Structure Page 65 Wednesday, December 31, 1969 17:00
Structural Properties
Table 28. DENSITY OF ALUMINUM (SHEET 1 OF 2)
ALLOYS
Class
Metal or Alloy
Density g/cm3
Pure Aluminum
Aluminum (99.996%)
2.6989
Wrought alloys
EC, 1060 alloys 1100 2011 2014
2.70 2.71 2.82 2.80
2024 2218 3003 4032
2.77 2.81 2.73 2.69
5005 5050 5052 5056
2.70 2.69 2.68 2.64
5083 5086 5154 5357
2.66 2.65 2.66 2.70
5456 6061, 6063 6101, 6151 7075
2.66 2.70 2.70 2.80
7079 7178
2.74 2.82
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p152 (1993).
©2001 CRC Press LLC Shackelford & Alexander
65
3.7 Structure Page 66 Wednesday, December 31, 1969 17:00
Structural Properties
Table 28. DENSITY OF ALUMINUM (SHEET 2 OF 2)
ALLOYS
Class
Metal or Alloy
Density g/cm3
Casting Alloys
A13 43 108, A108 A132
2.66 2.69 2.79 2.72
D132 F132 138 142
2.76 2.74 2.95 2.81
195, B195 214 220 319
2.81 2.65 2.57 2.79
355 356 360 380
2.71 2.68 2.64 2.71
750 40E
2.88 2.81
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p152 (1993).
©2001 CRC Press LLC
66
CRC Handbook of Materials Science & Engineering
3.7 Structure Page 67 Wednesday, December 31, 1969 17:00
Structural Properties
Table 29. DENSITY OF
COPPER AND COPPER ALLOYS (SHEET 1 OF 3)
Class
Metal or Alloy
Density g/cm3
Wrought coppers
Pure copper
8.96
Electrolytic tough pitch copper (ETP) Deoxidized copper, high residual phosphorus (DHP) Free-machining copper, 0.5% Te Free-machining copper, 1.0% Pb
8.89 8.94 8.94 8.94
Gilding, 95% Commercial bronze 90% Jewelry bronze, 87.5% Red brass, 85%
8.86 8.80 8.78 8.75
Low brass, 80% Cartridge brass, 70% Yellow brass Muntz metal
8.67 8.53 8.47 8.39
Leaded commercial bronze Low-leaded brass (tube) Medium-leaded brass High-leaded brass (tube)
8.83 8.50 8.47 8.53
High-leaded brass Extra-high-leaded brass Free-cutting brass Leaded Muntz metal
8.50 8.50 8.50 8.41
Forging brass Architectural bronze Inhibited admiralty Naval brass
8.44 8.47 8.53 8.41
Leaded naval brass Manganese bronze Phosphor bronze, 5% Phosphor bronze, 8%
8.44 8.36 8.86 8.80
Wrought alloys
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p152 (1993).
©2001 CRC Press LLC Shackelford & Alexander
67
3.7 Structure Page 68 Wednesday, December 31, 1969 17:00
Structural Properties
Table 29. DENSITY OF
COPPER AND COPPER ALLOYS (SHEET 2 OF 3)
Class
Metal or Alloy
Density g/cm3
Wrought alloys (Con’t)
Phosphor bronze, 10% Phosphor bronze, 1.25% Free-cutting phosphor bronze Cupro-nickel, 30%
8.78 8.89 8.89 8.94
Cupro-nickel, 10% Nickel silver,65-18 Nickel silver, 55-18 High-silicon bronze
8.94 8.73 8.70 8.53
Low-silicon bronze Aluminum bronze, 5% Al Aluminum-silicon bronze Aluminum bronze
8.75 8.17 7.69 7.78
Aluminum bronze Beryllium copper
7.58 8.23
Chromium copper (1% Cr) 88Cu-10Sn-2Z 88Cu-8Sn-4Zn 89Cu-11Sn
8.7 8.7 8.8 8.78
88Cu-6Sn-1.5Pb-4.5Zn 87Cu-8Sn-1Pb-4Zn 87Cu-10Sn-1Pb-2Zn 80Cu-10Sn-10Pb
8.7 8.8 8.8 8.95
83Cu-7Sn-7Pb-3Zn 85Cu-5Sn-9Pb-1Zn 78Cu-7Sn-15Pb 70Cu-SSn-2SPb
8.93 8.87 9.25 9.30
85Cu-5Sn-SPb-SZn 83Cu-4Sn-6Pb-7Zn 81Cu-3Sn-7Pb-9Zn 76Cu-2.5Sn-6.5Pb-15Zn
8.80 8.6 8.7 8.77
Casting alloys
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p152 (1993).
©2001 CRC Press LLC
68
CRC Handbook of Materials Science & Engineering
3.7 Structure Page 69 Wednesday, December 31, 1969 17:00
Structural Properties
Table 29. DENSITY OF
COPPER AND COPPER ALLOYS (SHEET 3 OF 3)
Class
Metal or Alloy
Density g/cm3
Casting alloys (Con’t)
72Cu-1Sn-3Pb-24Zn 67Cu-1Sn-3Pb-29Zn 61Cu-1Sn-1Pb-37Zn
8.50 8.45 8.40
Manganese bronze, 60 ksi Manganese bronze, 65 ksi Manganese bronze, 90 ksi Manganese bronze, 110 ksi
8.2 8.3 7.9 7.7
Aluminum bronze, Alloy 9A Aluminum bronze, Alloy 9B Aluminum bronze, Alloy 9C Aluminum bronze, Alloy 9D
7.8 7.55 7.5 7.7
Nickel silver, 12% Ni Nickel silver, 16% Ni Nickel silver, 20% Ni Nickel silver, 25% Ni
8.95 8.95 8.85 8.8
Silicon bronze Silicon brass
8.30 8.30
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p152 (1993).
©2001 CRC Press LLC Shackelford & Alexander
69
3.7 Structure Page 70 Wednesday, December 31, 1969 17:00
Structural Properties
Table 30. DENSITY OF
MAGNESIUM AND MAGNESIUM ALLOYS
Class
Metal or Alloy
Density g/cm3
Pure Magnesium
Magnesium (99.8%)
1.738
Casting alloys
AM100A AZ63A AZ81A AZ9lA, B, C
1.81 1.84 1.80 1.81
AZ92A HK31A HZ32A ZH42, ZH62A
1.82 1.79 1.83 1.86
ZK51A ZE41A EZ33A EK30A
1.81 1.82 1.83 1.79
EK41A
1.81
M1A A3A AZ31B PE
1.76 1.77 1.77 1.76
AZ61A AZ80A ZK60A, B ZE10A
1.80 1.80 1.83 1.76
HM21A HM31A
1.78 1.81
Wrought alloys
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p153 (1993).
©2001 CRC Press LLC
70
CRC Handbook of Materials Science & Engineering
3.7 Structure Page 71 Wednesday, December 31, 1969 17:00
Structural Properties
Table 31. DENSITY OF
NICKEL AND NICKEL ALLOYS
Class
Metal or Alloy
Density g/cm3
Pure
Nickel (99.95% Ni+Co) "A" Nickel "D" Nickel Duranickel
8.902 8.885 8.78 8.26
Cast nickel Monel "K" Mond Monel(cast)
8.34 8.84 8.47 8.63
"H" Monel(cast) "S" Monel(cast) Inconel
8.5 8.36 8.51
Inconel (cast) Ni-o-nel
8.3 7.86
Hastelloy B Hastelloy C Hastelloy D Hastelloy F
9.24 8.94 7.8 8.17
Hastelloy N Hastelloy W Hastelloy X
8.79 9.03 8.23
Nickel-chromium-molybdenum-copper alloys
Illium G Illium R
8.58 8.58
Electrical resistance alloys
80Ni-20Cr 60Ni-24Fe-16Cr 35Ni-4SFe-20Cr Constantan
8.4 8.147 7.95 8.9
Nickel-molybdenum-chromium-iron alloys
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p153 (1993).
©2001 CRC Press LLC Shackelford & Alexander
71
3.7 Structure Page 72 Wednesday, December 31, 1969 17:00
Structural Properties
Table 32. DENSITY OF
LEAD AND LEAD ALLOYS
Class
Metal or Alloy
Density g/cm3
Lead alloys
Chemical lead (99.90+% Pb) Corroding lead (99.73+% Pb) Arsenical lead Calcium lead
11.34 11.36 11.34 11.34
5-95 solder 20-80 solder 50-50 solder
11.0 10.2 8.89
Antimonial lead alloys
1% antimonial lead Hard lead (96Pb-4Sb) Hard lead (94Pb-6Sb) 8% antimonial lead 9% antimonial lead
11.27 11.04 10.88 10.74 10.66
Lead-base babbitt alloys
Lead-base babbitt, SAE 13 Lead-base babbitt, SAE 14 Lead-base babbitt, Alloy 8 Arsenical lead, Babbitt (SAE 15) Arsenical lead, "G" Babbitt
10.24 9.73 10.04 10.1 10.1
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p153 (1993).
©2001 CRC Press LLC
72
CRC Handbook of Materials Science & Engineering
3.7 Structure Page 73 Wednesday, December 31, 1969 17:00
Structural Properties
Table 33. DENSITY OF
TIN AND TIN ALLOYS
Metal or Alloy
Density g/cm3
Pure tin Soft solder (30% Pb) Soft solder (37% Pb)
7.3 8.32 8.42
Tin babbitt, Alloy 1 Tin babbitt, Alloy 2 Tin babbitt, Alloy 3 Tin babbitt, Alloy 4 Tin babbitt, Alloy S
7.34 7.39 7.46 7.53 7.75
White metal Pewter
7.28 7.28
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p153 (1993).
©2001 CRC Press LLC Shackelford & Alexander
73
3.7 Structure Page 74 Wednesday, December 31, 1969 17:00
Structural Properties
Table 34. DENSITY OF
WROUGHT TITANIUM ALLOYS
Class
Metal or Alloy
Density (Mg/m3)
Commercially Pure
99.5Ti 99.2Ti 99.1Ti
4.51 4.51 4.51
99.0Ti 99.2 Ti–0.2Pd Ti-0.8Ni-0.3Mo
4.51 4.51 4.54
Alpha Alloys
Ti-5Al-2.5Sn Ti-5Al-2.5Sn (low O2)
4.48 4.48
Near Alpha Alloys
Ti-8Al-1Mo-1V Ti-11Sn-1Mo-2.25Al-5.0Zr-1Mo-0.2Si Ti-6Al-2Sn-4Zr-2Mo
4.37 4.82 4.54
Ti-5Al-5Sn-2Zr-2Mo-0.25Si Ti-6Al-2Nb-1Ta-1Mo
4.51 4.48
Ti-8Mn Ti-3Al-2.5V Ti-6Al-4V
4.73 4.48 4.43
Ti-6Al-4V (low O2) Ti-6Al-6V-2Sn Ti-7Al-4Mo
4.43 4.54 4.48
Ti-6Al-2Sn-4Zr-6Mo Ti-6Al-2Sn-2Zr-2Mo-2Cr-0.25Si Ti-10V-2Fe-3Al
4.65 4.57 4.65
Ti-13V-11Cr-3Al Ti-8Mo-8V-2Fe-3Al Ti-3Al-8V-6Cr-4Mo-4Zr
4.84 4.84 4.82
Alpha-Beta Alloys
Beta Alloys
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p511, (1993).
©2001 CRC Press LLC
74
CRC Handbook of Materials Science & Engineering
3.7 Structure Page 75 Wednesday, December 31, 1969 17:00
Structural Properties
Table 35. DENSITY OF
TITANIUM AND TITANIUM ALLOYS
Metal or Alloy
Density g/cm3
99.9% Ti 99.2% Ti 99.0% Ti
4.507 4.507 4.52
Ti-6Al-4V Ti-5Al-2.5Sn Ti-2Fe-2Cr-2Mo Ti-8Mn
4.43 4.46 4.65 4.71
Ti-7Al-4Mo Ti-4Al-4Mn Ti-4AI-3Mo-1V Ti-2.5Al-16V
4.48 4.52 4.507 4.65
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p153 (1993).
©2001 CRC Press LLC Shackelford & Alexander
75
3.7 Structure Page 76 Wednesday, December 31, 1969 17:00
Structural Properties
Table 36. DENSITY OF
ZINC AND ZINC ALLOYS
Metal or Alloy
Density g/cm3
Pure zinc AG40A alloy AC41A alloy
7.133 6.6 6.7
Commercial rolled zinc 0.08% Pb Commercial rolled zinc 0.06 Pb, 0.06 Cd Commercial rolled zinc 0.3 Pb, 0.3 Cd
7.14 7.14 7.14
Copper-hardened, rolled zinc (1% Cu) Rolled zinc alloy (1Cu-0.010Mg) Zn-Cu-Ti alloy (0.8Cu, 0.15Ti)
7.18 7.18 7.18
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p153-154 (1993).
©2001 CRC Press LLC
76
CRC Handbook of Materials Science & Engineering
3.7 Structure Page 77 Wednesday, December 31, 1969 17:00
Structural Properties
Table 37. DENSITY OF
PERMANENT MAGNET MATERIALS
Metal or Alloy
Density g/cm3
Cunico Cunife Comol
8.30 8.61 8.16
Alnico I Alnico I Alnico III
6.89 7.09 6.89
Alnico IV Alnico V Alnico VI
7.00 7.31 7.42
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p154, (1993).
©2001 CRC Press LLC Shackelford & Alexander
77
3.7 Structure Page 78 Wednesday, December 31, 1969 17:00
Structural Properties
Table 38. DENSITY OF
PRECIOUS METALS
Metal or Alloy
Density g/cm3
Silver Gold 70Au-30Pt Platinum
10.49 19.32 19.92 21.45
Pt-3.5Rh Pt-5Rb Pt-lORh Pt-20Rb
20.9 20.65 19.97 18.74
Pt-30Rh Pt-40Rb Pt-5Ir Pt-10Ir
17.62 16.63 21.49 2153
Pt-15Ir Pt-20Ir Pt-25Ir Pt-30Ir
2157 21.61 21.66 21.70
Pt-35Ir Pt-5Ru Pt-10Ru Palladium
21.79 20.67 19.94 12.02
60Pd40Cu 95.5Pd-4.5Ru 95.5Pd-45Ru
10.6 12.07 11.62
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p154, (1993).
©2001 CRC Press LLC
78
CRC Handbook of Materials Science & Engineering
3.7 Structure Page 79 Wednesday, December 31, 1969 17:00
Structural Properties
Table 39. DENSITY OF
SUPERALLOYS
Class
Alloy
Density (Mg/m3)
Iron-base alloys
Carpenter 20-Cb3 Haynes 556 Incoloy 800 Incoloy 801
8.055 8.23 7.94 7.94
Cobalt-base alloys
Haynes 25(L-605) Haynes 188 Stellite 6B UMCo 50
9.13 9.13 8.38 8.05
Nickel-base alloys
Hastelloy B–2 Hastelloy C4 Hastelloy C–276 Hastelloy N
9.21 8.64 8.90 8.93
Hastelloy S Hastelloy W Hastelloy X Inconel 600
8.76 9.03 8.23 8.42
Inconel 625 Inconel X750 René 41 Udimet 500
8.44 8.25 8.25 8.14
Udimet 700 Waspaloy
7.92 8.20
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p386, (1993).
©2001 CRC Press LLC Shackelford & Alexander
79
3.7 Structure Page 80 Wednesday, December 31, 1969 17:00
Structural Properties
Table 40. DENSITY OF SELECTED (SHEET 1 OF 3) Class
Borides
Carbides
Nitrides
CERAMICS Density (g/cm3)
Ceramic Chromium Diboride (CrB2) Hafnium Diboride (HfB2) Tantalum Diboride (TaB2)
5.6 11.2 12.60
Titanium Diboride (TiB2) Zirconium Diboride (ZrB2)
4.5-4.62 6.09-6.102
Boron Carbide (B4C) Hafnium Monocarbide (HfC)
2.51 12.52-12.70
Silicon Carbide (SiC) (hexagonal) (cubic)
3.217 3.210
Tantalum Monocarbide (TaC) Titanium Monocarbide (TiC) Trichromium Dicarbide (Cr3C2)
14.48-14.65 4.92-4.938 6.70
Tungsten Monocarbide (WC) Zirconium Monocarbide (ZrC)
15.8 6.44-6.73
Aluminum Nitride (AlN) Boron Nitride (BN) (cubic) (hexagonal)
3.26-3.30
Titanium Mononitride (TiN) Trisilicon tetranitride (Si3N4) (α) (β)
5.43 3.184 3.187
Zirconium Mononitride (TiN)
7.349
3.49 2.27
Source: data compiled by J.S. Park from No. 1 Materials Index, Peter T.B. Shaffer, Plenum Press, New York, (1964); Smithells Metals Reference Book, Eric A. Brandes, ed., in association with Fulmer Research Institute Ltd. 6th ed. London, Butterworths, Boston, (1983); and Ceramic Source, American Ceramic Society (1986-1991).
©2001 CRC Press LLC
80
CRC Handbook of Materials Science & Engineering
3.7 Structure Page 81 Wednesday, December 31, 1969 17:00
Structural Properties
Table 40. DENSITY OF SELECTED (SHEET 2 OF 3) Class
Density (g/cm3)
Ceramic
Oxides
CERAMICS
Aluminum Oxide (Al2O3) Beryllium Oxide (BeO) Calcium Oxide (CaO) Cerium Dioxide (CeO2) Dichromium Trioxide (Cr2O3)
3.97-3.986 3.01-3.03 3.32 7.28 5.21
Hafnium Dioxide (HfO2) Magnesium Oxide (MgO) Nickel monoxide (NiO) Thorium Dioxide (ThO2)
9.68 3.581 6.8-7.45 9.821
Titanium Oxide (TiO2) (anatase) (brookite) (rutile) Uranium Dioxide (UO2)
3.84 4.17 4.25 10.949-10.97
Zirconium Oxide (ZrO2) (monoclinic) (CaO stabilized) (MgO stabilized) (plasma sprayed)
5.56 5.5 5.43 5.6-5.7
Cordierite (2MgO 2Al2O3 5SiO2) Mullite (3Al2O3 2SiO2) (theoretical)
1.61-2.51 2.6-3.26 3.16-3.22
Sillimanite (Al2O3 SiO2) Spinel (Al2O3 MgO) Zircon (SiO2 ZrO2)
3.23-3.24 3.580 4.6
Source: data compiled by J.S. Park from No. 1 Materials Index, Peter T.B. Shaffer, Plenum Press, New York, (1964); Smithells Metals Reference Book, Eric A. Brandes, ed., in association with Fulmer Research Institute Ltd. 6th ed. London, Butterworths, Boston, (1983); and Ceramic Source, American Ceramic Society (1986-1991).
©2001 CRC Press LLC Shackelford & Alexander
81
3.7 Structure Page 82 Wednesday, December 31, 1969 17:00
Structural Properties
Table 40. DENSITY OF SELECTED (SHEET 3 OF 3) Class
Silicides
CERAMICS Density (g/cm3)
Ceramic Molybdenum Disilicide (MoSi2) Tungsten Disilicide (WSi2)
6.24-6.29 9.25-9.3
Source: data compiled by J.S. Park from No. 1 Materials Index, Peter T.B. Shaffer, Plenum Press, New York, (1964); Smithells Metals Reference Book, Eric A. Brandes, ed., in association with Fulmer Research Institute Ltd. 6th ed. London, Butterworths, Boston, (1983); and Ceramic Source, American Ceramic Society (1986-1991).
©2001 CRC Press LLC
82
CRC Handbook of Materials Science & Engineering
3.7 Structure Page 83 Wednesday, December 31, 1969 17:00
Structural Properties
Table 41. DENSITY OF
GLASSES
(SHEET 1 OF 10)
Class
Density (g/cm3)
Temperature Range of Validity
2.201-2.211 2.1977
room temp. room temp.
(~1% wt impurity) (~1% wt impurity)
2.094 2.072
1935˚C 2048˚C
(~1% wt impurity) (~1% wt impurity) (~1% wt impurity)
2.057 2.045 1.929
2114˚C 2165˚C 2322˚C
(1300˚C for 1 hr then 1000˚C for 70 hr)
2.201
(1300˚C for 1 hr then 1100˚C for 22 hr)
2.198
(1300˚C for 1 hr then 1200˚C for 7 hr)
2.201
(1300˚C for 1 hr then 1400˚C for 5 min)
2.201
(5% wt Na2O) (10% wt Na2O) (14.86% wt Na2O)
2.240 2.291 2.334
20˚C 20˚C 20˚C
(19.55% wt Na2O) (25% wt Na2O) (29.20% wt Na2O)
2.383 2.431 2.459
20˚C 20˚C 20˚C
(35.25% wt Na2O) (39.66% wt Na2O) (49.20% wt Na2O)
2.498 2.521 2.563
20˚C 20˚C 20˚C
Glass
SiO2 glass (stabilized)
SiO2-Na2O glass
Source: data compiled by J.S. Park from O. V. Mazurin, M. V. Streltsina and T. P. ShvaikoShvaikovskaya, Handbook of Glass Data, Part A and Part B, Elsevier, New York, 1983
©2001 CRC Press LLC Shackelford & Alexander
83
3.7 Structure Page 84 Wednesday, December 31, 1969 17:00
Structural Properties
Table 41. DENSITY OF
GLASSES
(SHEET 2 OF 10)
Class SiO2-Na2O glass (con’t)
SiO2-CaO glass
Density (g/cm3)
Temperature Range of Validity
(20.1% wt Na2O)
2.270
987˚C
(20.1% wt Na2O) (20.1% wt Na2O)
2.240 2.220
1249˚C 1388˚C
(30.1% wt Na2O) (30.1% wt Na2O) (30.1% wt Na2O)
2.270 2.230 2.205
1004˚C 1252˚C 1400˚C
(45.6% wt Na2O) (45.6% wt Na2O) (45.6% wt Na2O)
2.260 2.225 2.190
1044˚C 1243˚C 1413˚C
(50.2% wt Na2O) (50.2% wt Na2O) (50.2% wt Na2O)
2.250 2.215 2.180
1075˚C 1259˚C 1421˚C
(55.4% wt Na2O) (55.4% wt Na2O) (55.4% wt Na2O)
2.245 2.205 2.165
1105˚C 1258˚C 1412˚C
(60.9% wt Na2O) (60.9% wt Na2O) (60.9% wt Na2O)
2.250 2.190 2.145
1052˚C 1243˚C 1413˚C
(30% mol CaO) (35% mol CaO) (39.0% mol CaO) (40% mol CaO)
2.466 2.475 2.746 2.542
1700˚C 1700˚C 20˚C 1700˚C
Glass
Source: data compiled by J.S. Park from O. V. Mazurin, M. V. Streltsina and T. P. ShvaikoShvaikovskaya, Handbook of Glass Data, Part A and Part B, Elsevier, New York, 1983
©2001 CRC Press LLC
84
CRC Handbook of Materials Science & Engineering
3.7 Structure Page 85 Wednesday, December 31, 1969 17:00
Structural Properties
Table 41. DENSITY OF
GLASSES
(SHEET 3 OF 10)
Class SiO2-CaO glass (Con’t)
SiO2-PbO glass
Density (g/cm3)
Temperature Range of Validity
(42.5% mol CaO)
2.555-2.568
1700˚C
(44.6% mol CaO) (45% mol CaO) (47.5% mol CaO)
2.835 2.590-2.618 2.602-2.604
20˚C 1700˚C 1700˚C
(50.0% mol CaO) (50% mol CaO) (52.5% mol CaO) (52.9% mol CaO)
2.898 2.615-2.617 2.612-2.640 2.918
20˚C 1700˚C 1700˚C 20˚C
(57.5% mol CaO) (57.5% mol CaO) (60% mol CaO)
2.953 2.641-2.644 2.661
20˚C 1700˚C 1700˚C
(20.78% mol PbO) (24.90% mol PbO) (29.71% mol PbO)
3.6711 3.9606 4.3558
room temp. room temp. room temp.
(34.66% mol PbO) (35.0% mol PbO) (40.2% mol PbO) (40.80% mol PbO)
4.7437 5.10 5.15 5.2543
room temp. 1270K 1270K room temp.
(44.7% mol PbO) (45.56% mol PbO) (49.5% mol PbO) (50.50% mol PbO)
5.45 5.6416 5.85 6.0473
1270K room temp. 1270K room temp.
(52.7% mol PbO) (54.45% mol PbO) (58.0% mol PbO) (59.39% mol PbO)
5.90 6.3322 6.05 6.6894
1270K room temp. 1270K room temp.
Glass
Source: data compiled by J.S. Park from O. V. Mazurin, M. V. Streltsina and T. P. ShvaikoShvaikovskaya, Handbook of Glass Data, Part A and Part B, Elsevier, New York, 1983
©2001 CRC Press LLC Shackelford & Alexander
85
3.7 Structure Page 86 Wednesday, December 31, 1969 17:00
Structural Properties
Table 41. DENSITY OF
GLASSES
(SHEET 4 OF 10)
Class SiO2-PbO glass (Con’t)
SiO2-Al2O3 glass
Density (g/cm3)
Temperature Range of Validity
(65.97% mol PbO)
7.0810
room temp.
(66.7% mol PbO) (73.0% mol PbO) (80.0% mol PbO)
6.20 6.42 6.70
1270K 1270K 1270K
(84.9% mol PbO) (89.0% mol PbO) (94.2% mol PbO)
7.03 7.05 7.45
1270K 1270K 1270K
(0.04% wt Al2O3 for quintus quartz glass)
2.2000
room temp.
(0.10% wt Al2O3 for Cab-O-Sil glass)
2.2025
room temp.
(0.37% wt Al2O3 for I.R. vitreosil glass)
2.2043
room temp.
2.1977
room temp.
2.1982
room temp.
2.2047
room temp.
2.2048
room temp.
2.2006
room temp.
2.2027
room temp.
Glass
(0.38% wt Al2O3 for Cab-O-Sil glass) (0.38% wt Al2O3 for quintus quartz glass) (0.41% wt Al2O3 for Cab-O-Sil glass) (0.47% wt Al2O3 for quintus quartz glass) (0.64% wt Al2O3 for I.R. vitreosil glass) (0.77% wt Al2O3 for quintus quartz glass)
Source: data compiled by J.S. Park from O. V. Mazurin, M. V. Streltsina and T. P. ShvaikoShvaikovskaya, Handbook of Glass Data, Part A and Part B, Elsevier, New York, 1983
©2001 CRC Press LLC
86
CRC Handbook of Materials Science & Engineering
3.7 Structure Page 87 Wednesday, December 31, 1969 17:00
Structural Properties
Table 41. DENSITY OF
GLASSES
(SHEET 5 OF 10)
Class SiO2-Al2O3 glass (Con’t)
Density (g/cm3)
Temperature Range of Validity
(1.22% wt Al2O3 for Cab-O-Sil glass)
2.2095
room temp.
(1.29% wt Al2O3 for I.R. vitreosil glass)
2.2072
room temp.
(2.30% wt Al2O3 for I.R. vitreosil glass)
2.2081
room temp.
(2.34% wt Al2O3 for quintus quartz glass)
2.1994
room temp.
(2.70% wt Al2O3 for Cab-O-Sil glass)
2.2031
room temp.
(5.22% wt Al2O3 for quintus quartz glass)
2.2118
room temp.
(14.82% mol Al2O3) (14.82% mol Al2O3) (14.82% mol Al2O3) (14.82% mol Al2O3)
2.319 2.320 2.313 2.302
1707˚C 1813˚C 1907˚C 2008˚C
(30.08% mol Al2O3) (30.08% mol Al2O3) (30.08% mol Al2O3) (30.08% mol Al2O3)
2.475 2.460 2.448 2.446
1758˚C 1858˚C 1909˚C 1975˚C
(46.92% mol Al2O3) (46.92% mol Al2O3) (46.92% mol Al2O3)
2.736 2.724 2.627
1755˚C 1803˚C 1859˚C
Glass
Source: data compiled by J.S. Park from O. V. Mazurin, M. V. Streltsina and T. P. ShvaikoShvaikovskaya, Handbook of Glass Data, Part A and Part B, Elsevier, New York, 1983
©2001 CRC Press LLC Shackelford & Alexander
87
3.7 Structure Page 88 Wednesday, December 31, 1969 17:00
Structural Properties
Table 41. DENSITY OF
GLASSES
(SHEET 6 OF 10)
Class SiO2-Al2O3 glass (Con’t)
SiO2-B2O3 glasss
Density (g/cm3)
Temperature Range of Validity
(46.92% mol Al2O3)
2.625
1910˚C
(46.92% mol Al2O3)
2.612
1959˚C
(70.21% mol Al2O3) (70.21% mol Al2O3)
2.811 2.791
1966˚C 1995˚C
(35.1% mol B2O3) (39.2% mol B2O3) (44.2% mol B2O3) (50.8% mol B2O3)
2.0436 2.0224 2.0031 1.9865
25˚C 25˚C 25˚C 25˚C
(53.10% mol B2O3)
1.892-0.0634 x10-3T
1653K< T <1803K
(58.4% mol B2O3)
1.9608
25˚C
(62.40% mol B2O3)
1.812-0.0475 x10-3T
1553K< T <1733K
(71.90% mol B2O3)
1.785-0.0705 x10-3T
1303K
(72.7% mol B2O3)
1.9135
25˚C
(82.50% mol B2O3)
1.737-0.0798 x10-3T
1203K< T <1633K
(83.2% mol B2O3) (88.6% mol B2O3)
1.8838 1.8682
25˚C 25˚C
Glass
Source: data compiled by J.S. Park from O. V. Mazurin, M. V. Streltsina and T. P. ShvaikoShvaikovskaya, Handbook of Glass Data, Part A and Part B, Elsevier, New York, 1983
©2001 CRC Press LLC
88
CRC Handbook of Materials Science & Engineering
3.7 Structure Page 89 Wednesday, December 31, 1969 17:00
Structural Properties
Table 41. DENSITY OF
GLASSES
(SHEET 7 OF 10)
Class
SiO2-B2O3 glasss (Con’t)
Density (g/cm3)
Temperature Range of Validity
(90.00% mol B2O3)
1.680-0.0806 x10-3T
1203K< T <1633K
(92.6% mol B2O3)
1.8599
25˚C
(93.91% mol B2O3)
1.661-0.0825 x10-3T
1243K< T <1623K
1.8453
25˚C
1.844-1.859 1.693 1.671 1.648 1.626 1.609 1.580 1.559 1.541 1.528 1.518 1.509 1.503 1.498
25˚C 411˚C 450˚C 500˚C 550˚C 600˚C 700˚C 800˚C 900˚C 1000˚C 1100˚C 1200˚C 1300˚C 1400˚C
(28.8% mol CaO)
2.475-2.483
25˚C
(31.2% mol CaO) (31.2% mol CaO)
2.519-2.526 2.334-2.341
25˚C 900˚C
(31.2% mol CaO) (31.2% mol CaO) (31.2% mol CaO)
2.279-2.288 2.229-2.231 2.174
1000˚C 1100˚C 1200˚C
Glass
(100% mol B2O3) B2O3 glass
B2O3-CaO glass
Source: data compiled by J.S. Park from O. V. Mazurin, M. V. Streltsina and T. P. ShvaikoShvaikovskaya, Handbook of Glass Data, Part A and Part B, Elsevier, New York, 1983
©2001 CRC Press LLC Shackelford & Alexander
89
3.7 Structure Page 90 Wednesday, December 31, 1969 17:00
Structural Properties
Table 41. DENSITY OF
GLASSES
(SHEET 8 OF 10)
Class B2O3-CaO glass (Con’t)
B2O3-Na2O glass
Density (g/cm3)
Temperature Range of Validity
(34.7% mol CaO)
2.583-2.590
25˚C
(34.7% mol CaO) (34.7% mol CaO)
2.309 2.280
1056˚C 1105˚C
(37.1% mol CaO) (37.1% mol CaO) (37.1% mol CaO) (37.1% mol CaO)
2.622-2.629 2.306 2.282 2.259
25˚C 1105˚C 1153˚C 1200˚C
(42.5% mol CaO) (42.5% mol CaO)
2.349 2.328
1145˚C 1193˚C
(45.7% mol CaO) (45.7% mol CaO) (45.7% mol CaO)
2.403 2.379 2.359
1106˚C 1156˚C 1207˚C
(50.3% mol CaO) (50.3% mol CaO)
2.417 2.398
1156˚C 1199˚C
(3% mol Na2O) (3% mol Na2O) (3% mol Na2O)
1.608 1.601 1.587
920˚C 1000˚C 1091˚C
(6% mol Na2O) (6% mol Na2O) (6% mol Na2O) (8.21% mol Na2O)
1.705 1.691 1.660 2.0112
907˚C 1000˚C 1141˚C room temp.
(9% mol Na2O) (9% mol Na2O) (9% mol Na2O) (10.33% mol Na2O)
1.794 1.773 1.740 2.0466
890˚C 1000˚C 1109˚C room temp.
Glass
Source: data compiled by J.S. Park from O. V. Mazurin, M. V. Streltsina and T. P. ShvaikoShvaikovskaya, Handbook of Glass Data, Part A and Part B, Elsevier, New York, 1983
©2001 CRC Press LLC
90
CRC Handbook of Materials Science & Engineering
3.7 Structure Page 91 Wednesday, December 31, 1969 17:00
Structural Properties
Table 41. DENSITY OF
GLASSES
(SHEET 9 OF 10)
Class B2O3-Na2O glass (Con’t)
Density (g/cm3)
Temperature Range of Validity
(12% mol Na2O)
1.872
901˚C
(12% mol Na2O) (12% mol Na2O) (12.03% mol Na2O)
1.842 1.808 2.0752
1000˚C 1106˚C room temp.
(14.12% mol Na2O) (15% mol Na2O) (15% mol Na2O) (15% mol Na2O)
2.1053 1.907 1.886 1.848
room temp. 934˚C 1000˚C 1131˚C
(16.34% mol Na2O)
2.0466
room temp.
(18% mol Na2O) (18% mol Na2O) (18% mol Na2O)
1.976 1.935 1.904
882˚C 1000˚C 1097˚C
(18.16% mol Na2O) (20.23% mol Na2O)
2.0752 2.1053
room temp. room temp.
(21% mol Na2O) (21% mol Na2O) (21% mol Na2O) (22.07% mol Na2O)
2.009 1.971 1.921 2.2146
910˚C 1000˚C 1136˚C room temp.
(24% mol Na2O) (24% mol Na2O) (24% mol Na2O) (24.33% mol Na2O)
2.054 2.000 1.958 2.2493
891˚C 1000˚C 1106˚C room temp.
(26.18% mol Na2O) (27% mol Na2O)
2.2835 2.043
room temp. 945˚C
Glass
Source: data compiled by J.S. Park from O. V. Mazurin, M. V. Streltsina and T. P. ShvaikoShvaikovskaya, Handbook of Glass Data, Part A and Part B, Elsevier, New York, 1983
©2001 CRC Press LLC Shackelford & Alexander
91
3.7 Structure Page 92 Wednesday, December 31, 1969 17:00
Structural Properties
Table 41. DENSITY OF
GLASSES
(SHEET 10 OF 10)
Class B2O3-Na2O glass (Con’t)
Density (g/cm3)
Temperature Range of Validity
(27% mol Na2O)
1.992
1077˚C
(27% mol Na2O)
1.954
1170˚C
(28.17% mol Na2O) (30% mol Na2O)
2.3141 2.059
room temp. 916˚C
(30% mol Na2O) (30% mol Na2O) (30.68% mol Na2O) (32.05% mol Na2O)
2.018 1.960 2.3488 2.3591
1000˚C 1094˚C room temp. room temp.
(33% mol Na2O) (33% mol Na2O) (33% mol Na2O) (34.20% mol Na2O)
2.055 2.008 1.963 2.3755
909˚C 1000˚C 1076˚C room temp.
(36% mol Na2O) (36% mol Na2O) (36% mol Na2O) (36% mol Na2O)
2.075 1.998 1.944 1.944
885˚C 1000˚C 1081˚C 1081˚C
Glass
Source: data compiled by J.S. Park from O. V. Mazurin, M. V. Streltsina and T. P. ShvaikoShvaikovskaya, Handbook of Glass Data, Part A and Part B, Elsevier, New York, 1983
©2001 CRC Press LLC
92
CRC Handbook of Materials Science & Engineering
3.7 Structure Page 93 Wednesday, December 31, 1969 17:00
Structural Properties
Table 42. SPECIFIC
GRAVITY OF POLYMERS
(SHEET 1 OF 7) Class ABS Resins; Molded, Extruded
Acrylics; Cast, Molded, Extruded
Polymer
Medium impact
1.05—1.07
High impact
1.02—1.04
Very high impact Low temperature impact Heat resistant
1.01—1.06 1.02—1.04 1.06—1.08
Cast Resin Sheets, Rods: General purpose, type I General purpose, type II
1.17—1.19 1.18—1.20
Moldings: Grades 5, 6, 8 High impact grade
1.18—1.19 1.12—1.16
Thermoset Carbonate Allyl diglycol carbonate Alkyds; Molded Putty (encapsulating) Rope (general purpose) Granular (high speed molding) Glass reinforced (heavy duty parts) Cellulose Acetate; Molded, Extruded
Specific Gravity (ASTM D792)
1.32
2.05—2.15 2.20—2.22 2.21—2.24 2.02—2.10
ASTM Grade: H6—1 H4—1 H2—1
1.29—1.31 1.25—1.31
MH—1, MH—2 MS—1, MS—2 S2—1
1.24—1.31 1.23—1.30 1.22—1.30
Source: data compiled by J.S. Park from Charles T. Lynch, CRC Handbook of Materials Science, Vol. 3, CRC Press, Boca Raton, Florida, 1975 and Engineered Materials Handbook, Vol.2, Engineering Plastics, ASM International, Metals Park, Ohio, 1988.
©2001 CRC Press LLC Shackelford & Alexander
93
3.7 Structure Page 94 Wednesday, December 31, 1969 17:00
Structural Properties
Table 42. SPECIFIC
GRAVITY OF POLYMERS
(SHEET 2 OF 7) Class Cellulose Acetate Butyrate; Molded, Extruded
Polymer
ASTM Grade: H4 MH S2
Cellusose Acetate Propionate; Molded, Extruded
1.22 1.18—1.20 1.15—1.18
ASTM Grade: 1 3 6
1.22 1.20—1.21 1.19
Chlorinated Polymers: Chlorinated polyether Chlorinated polyvinyl chloride
1.4 1.54
Polycarbonates: Polycarbonate Polycarbonate (40% glass fiber reinforced)
1.51
Chlorinated Polymers Chlorinated polyether Chlorinated polyvinyl chloride
1.4 1.54
Polycarbonates Polycarbonate Polycarbonate (40% glass fiber reinforced)
Diallyl Phthalates; Molded
Specific Gravity (ASTM D792)
Orlon filled Dacron filled Asbestos filled Glass fiber filled
1.2
1.2 1.51
1.31—1.35 1.40—1.65 1.50—1.96 1.55—1.85
Source: data compiled by J.S. Park from Charles T. Lynch, CRC Handbook of Materials Science, Vol. 3, CRC Press, Boca Raton, Florida, 1975 and Engineered Materials Handbook, Vol.2, Engineering Plastics, ASM International, Metals Park, Ohio, 1988.
©2001 CRC Press LLC
94
CRC Handbook of Materials Science & Engineering
3.7 Structure Page 95 Wednesday, December 31, 1969 17:00
Table 42. SPECIFIC
GRAVITY OF POLYMERS
(SHEET 3 OF 7) Class Fluorocarbons; Molded,Extruded
Epoxies; Cast, Molded, Reinforced
Polymer Polytrifluoro chloroethylene (PTFCE)
Melamines; Molded
2.10—2.15
Polytetrafluoroethylene (PTFE)
2.1—2.3
Ceramic reinforced (PTFE) Fluorinated ethylene propylene(FEP)
2.2—2.4 2.12—2.17
Polyvinylidene— fluoride (PVDF)
1.77
Standard epoxies (diglycidyl ethers of bisphenol A) Cast rigid Cast flexible
1.15 1.14-1.18
Molded General purpose glass cloth laminate High strength laminate Filament wound composite Epoxies—Molded, Extruded
Specific Gravity (ASTM D792)
High performance resins (cycloaliphatic diepoxides) Cast, rigid Molded Glass cloth laminate Epoxy novolacs Cast, rigid Glass cloth laminate Filler & type Unfilled Cellulose electrical Glass fiber Alpha cellulose and mineral
1.80-2.0 1.8 1.84 2.17-2.18
1.24 1.7 1.97 1.22 1.97
1.48 1.43—1.50 1.8—2.0 1.5(a), 1.72(mineral)
Source: data compiled by J.S. Park from Charles T. Lynch, CRC Handbook of Materials Science, Vol. 3, CRC Press, Boca Raton, Florida, 1975 and Engineered Materials Handbook, Vol.2, Engineering Plastics, ASM International, Metals Park, Ohio, 1988.
©2001 CRC Press LLC
3.7 Structure Page 96 Wednesday, December 31, 1969 17:00
Structural Properties
Table 42. SPECIFIC
GRAVITY OF POLYMERS
(SHEET 4 OF 7) Class Nylons; Molded, Extruded
Polymer Type 6 General purpose Glass fiber (30%) reinforced Cast Flexible copolymers Type 8 Type 11 Type 12
Polyacetals
1.12—1.14 1.35—1.42 1.15 1.12—1.14 1.09 1.04 1.01
6/6 Nylon General purpose molding Glass fiber reinforced Glass fiber Molybdenum disulfide filled General purpose extrusion
Phenolics; Molded
Specific Gravity (ASTM D792)
1.13—1.15 1.37–1.47 1.37—1.41 1.13–1.15
6/10 Nylon General purpose Glass fiber (30%) reinforced
1.07—1.09 1.3
Type and filler General: woodflour and flock Shock: paper, flock, or pulp High shock: chopped fabric or cord Very high shock: glass fiber
1.32—1.46 1.34—1.46 1.36—1.43 1.75—1.90
Homopolymer: Standard 20% glass reinforced 22% TFE reinforced Copolymer: Standard 25% glass reinforced High flow
1.425 1.56 1.54 1.41 1.61 1.41
Source: data compiled by J.S. Park from Charles T. Lynch, CRC Handbook of Materials Science, Vol. 3, CRC Press, Boca Raton, Florida, 1975 and Engineered Materials Handbook, Vol.2, Engineering Plastics, ASM International, Metals Park, Ohio, 1988.
©2001 CRC Press LLC
96
CRC Handbook of Materials Science & Engineering
3.7 Structure Page 97 Wednesday, December 31, 1969 17:00
Structural Properties
Table 42. SPECIFIC
GRAVITY OF POLYMERS
(SHEET 5 OF 7) Class Phenolics: Molded
Polymer Arc resistant—mineral Rubber phenolic—woodflour or flock Rubber phenolic—chopped fabric Rubber phenolic—asbestos ABS–Polycarbonate Alloy PVC–Acrylic Alloy PVC–acrylic sheet PVC–acrylic injection molded
Polymides
Unreinforced Glass reinforced
Polyester; Thermoplastic
Injection Moldings: General purpose grade Glass reinforced grades Glass reinforced self extinguishing General purpose grade Glass reinforced grade Asbestos—filled grade
Polyesters: Thermosets
Reinforced polyester moldings
Cast polyyester Rigid Flexible
Specific Gravity (ASTM D792) 1.5—3.0 1.24—1.35 1.30—1.35 1.60—1.65 1.14 1.35 1.3 1.19—1.47 1.60—1.95
1.31 1.52 1.58 1.31 1.45 1.46
1.12—1.46 1.06—1.25
High strength (glass fibers)
1.8—2.0
Heat and chemical resistant (asbestos)
1.5—1.75
Sheet molding compounds, general purpose
1.65—1.80
Source: data compiled by J.S. Park from Charles T. Lynch, CRC Handbook of Materials Science, Vol. 3, CRC Press, Boca Raton, Florida, 1975 and Engineered Materials Handbook, Vol.2, Engineering Plastics, ASM International, Metals Park, Ohio, 1988.
©2001 CRC Press LLC Shackelford & Alexander
97
3.7 Structure Page 98 Wednesday, December 31, 1969 17:00
Structural Properties
Table 42. SPECIFIC
GRAVITY OF POLYMERS
(SHEET 6 OF 7) Class
Polymer
Specific Gravity (ASTM D792)
Phenylene Oxides
SE—100 SE—1 Glass fiber reinforced
1.1 1.06 1.21–1.27
Phenylene oxides (Noryl)
Standard Glass fiber reinforced Polyarylsulfone
1.24 1.41–1.55 1.36
Polypropylene
General purpose High impact
0.900—0.910 0.900—0.910
Asbestos filled Glass reinforced Flame retardant
1.11—1.36 1.04—1.22 1.2
Polyphenylene sulfide
Standard 40% glass reinforced
1.34—1.35 1.6—1.64
Polyethylenes; Molded, Extruded
Type I—lower density (0.910—0.925) Melt index 0.3—3.6 Melt index 6—26 Melt index 200
0.910—0.925 0.918—0.925 0.91
Type II—medium density (0.926—0.940) Melt index 20 Melt index l.0—1.9
0.93 0.930—0.940
Type III—higher density (0.941—0.965) Melt index 0.2—0.9 Melt index 0.l—12.0 Melt index 1.5—15 High molecular weight
0.96 0.950—0.955 0.96 0.94
Source: data compiled by J.S. Park from Charles T. Lynch, CRC Handbook of Materials Science, Vol. 3, CRC Press, Boca Raton, Florida, 1975 and Engineered Materials Handbook, Vol.2, Engineering Plastics, ASM International, Metals Park, Ohio, 1988.
©2001 CRC Press LLC
98
CRC Handbook of Materials Science & Engineering
3.7 Structure Page 99 Wednesday, December 31, 1969 17:00
Structural Properties
Table 42. SPECIFIC
GRAVITY OF POLYMERS
(SHEET 7 OF 7) Class Olefin Copolymers; Molded
Polymer EEA (ethylene ethyl acrylate) EVA (ethylene vinyl acetate) Ethylene butene Propylene—ethylene Ionomer Polyallomer
Polystyrenes; Molded
Polyvinyl Chloride And Copolymers; Molded, Extruded
Silicones; Molded, Laminated
Ureas; Molded
Specific Gravity (ASTM D792) 0.93 0.94 0.95 0.91 0.94 0.898—0.904
Polystyrenes General purpose Medium impact High impact
1.04 1.04—1.07 1.04—1.07
Glass fiber -30% reinforced Styrene acrylonitrile (SAN) Glass fiber (30%) reinforced SAN
1.29 1.04—1.07 1.35
Nonrigid—general
1.20—1.55
Nonrigid—electrical Rigid—normal impact Vinylidene chloride
1.16—1.40 1.32—1.44 1.68—1.75
Fibrous (glass) reinforced silicones Granular (silica) reinforced silicones Woven glass fabric/ silicone laminate
1.88 1.86—2.00 1.75—1.8
Alpha—cellulose filled (ASTM Type l)
1.45—1.55
Cellulose filled (ASTM Type 2) Woodflour filled
1.52 1.45—1.49
Source: data compiled by J.S. Park from Charles T. Lynch, CRC Handbook of Materials Science, Vol. 3, CRC Press, Boca Raton, Florida, 1975 and Engineered Materials Handbook, Vol.2, Engineering Plastics, ASM International, Metals Park, Ohio, 1988.
©2001 CRC Press LLC Shackelford & Alexander
99
3.8 Structure L Page 100 Wednesday, December 31, 1969 17:00
Table 43. DENSITY OF
55MSI GRAPHITE /6061 ALUMINUM COMPOSITES
55MSI graphite/6061 aluminum composites 55MSI graphite/6061 aluminum composites
Reinforcement Content (vol % )
Fiber Orientation
Density (g/cm3 )
34 34
0° 90°
2.35 2.35
Data from ASM Engineering Materials Reference Book, Second Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p148,(1994).
©2001 CRC Press LLC
3.9 Structure Page 101 Wednesday, December 31, 1969 17:00
Structural Properties
Table 44. DENSITY OF
GRAPHITE FIBER REINFORCED METALS Composite
Fiber content (vol%)
Density (lb/in3)
Graphite(a)/lead Graphite(b)/lead Graphite(a)/zinc Graphite(a)/magnesium
41 35 35 42
0.270 0.280 0.191 0.064
(a) Thornel 75 fiber (b) Courtaulds HM fiber Data from ASM Engineering Materials Reference Book, Second Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p148,(1994).
Table 45. DENSITY OF
SI3N4 COMPOSITES
(SHEET 1 OF 2) Matrix
Dispersed Phase
Density (g/cm3)
Si3N4+ 6 wt % Y2O3
None
3.26
Si3N4+ 6 wt % Y2O3
TiC (Ti, W) C WC
3.81 4.55 7.70
TaC HfC SiC
6.87 5.74 3.24
Containing 30 Vol % of Metal Carbide Dispersoid (2 µm average particle diameter) Data from ASM Engineering Materials Reference Book, Second Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p169,(1994).
©2001 CRC Press LLC
Shackelford & Alexander
101
3.9 Structure Page 102 Wednesday, December 31, 1969 17:00
Structural Properties
Table 45. DENSITY OF
SI3N4 COMPOSITES
(SHEET 2 OF 2) Matrix
Dispersed Phase
Density (g/cm3)
Al2O3
TiC
4.28
Containing 30 Vol % of Metal Carbide Dispersoid (2 µm average particle diameter) Data from ASM Engineering Materials Reference Book, Second Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p169,(1994).
©2001 CRC Press LLC
102
CRC Handbook of Materials Science & Engineering
Shackelford, James F. et al “Composition of Materials” Materials Science and Engineering Handbook Ed. James F. Shackelford & W. Alexander Boca Raton: CRC Press LLC, 2001
4.0 Composition Page 103 Wednesday, December 31, 1969 17:00
CHAPTER 2
Composition of Materials
List of Tables
Steels and Irons Composition Limits of Tool Steels Composition Limits of Gray Cast Irons Composition Limits of Ductile Irons Composition Ranges for Malleable Irons Composition Ranges for Carbon Steels Composition Ranges for Resulfurized Carbon Steels Composition Ranges for Alloy Steels Composition of Stainless Steels Copper Alloys Composition of Wrought Coppers and Copper Alloys Classification of Copper and Copper Alloys Aluminum Alloys Composition Ranges for Cast Aluminum Alloys Composition Ranges for Wrought Aluminum Alloys Tin Alloys Composition of Tin and Tin Alloys Heat Resistant Alloys Compositions of ACI Heat-Resistant Casting Alloys Zinc Alloys Composition of Zinc Die Casting Alloys
©2001 CRC Press LLC
103
4.0 Composition Page 104 Wednesday, December 31, 1969 17:00
Composition List of Tables (Continued)
Super Alloys Compositions of Wrought Superalloys Glass Ceramics Typical Composition of Glass-Ceramics
©2001 CRC Press LLC
104
CRC Handbook of Materials Science & Engineering
4.1 Composition L Page 105 Wednesday, December 31, 1969 17:00
Table 46. COMPOSITION LIMITS OF (SHEET 1 OF 3) Designations AISI
SAE
TOOL STEELS Composition (%)
UNS
C
Mn
Si
Cr
Ni
Mo
W
V
T11302.
0.78– 0.88; 0.95–1.05
0.15–0.40
0.20–0.45
3.75–4.50
0.30 max
4.50–5.50
5.50–6.75
1.75–2.20
T1 T1 T15 Chromium hot work steels
T12001 T12015
0.65–0.80 1.50–1.60
0.10–0.40 0.15–0.40
0.20–0.40 0.15–0.40
3.75–4.00 3.75–5.00
0.30 max 0.30 max
1.00 max
17.25–18.75 11.75–13.00
0.90–1.30 4.50–5.25
H11 H13
T20811 T20813
0.33–0.43 0.32–0.45
0.20–0.50 0.20–0.50
0.80–1.20 0.80–1.20
4.75–5.50 4.75–5.50
0.30 max 0.30 max
1.10–1.60 1.10–1.75
Co
Molybdenum high speed steels M2
M2
Tungsten high speed steels
H11 H13
Source: data from ASM Metals Reference Book, Second Edition, American Society for Metals, Metals Park, Ohio 44073, p.239, (1984).
©2001 CRC Press LLC
0.30–0.60 0.80–1.20
4.75–5.25
4.1 Composition L Page 106 Wednesday, December 31, 1969 17:00
Table 46. COMPOSITION LIMITS OF (SHEET 2 OF 3) Designations AISI
SAE
Composition (%) UNS
C
Tungsten hot work steels H21 H21 T20821 0.26–0.36 H26 T20826 0.45–0.55 Air–hardening medium–alloy cold work steels A2 A3
TOOL STEELS
Mn
Si
Cr
Ni
0.15–0.40 0.15–0.40
0.15–0.50 0.15–0.40
3.00–3.75 3.75–4.50
0.30 max 0.30 max
Mo
A2
T30102 T30103
0.95–1.05 1.20–1.30
1.00 max 0.40–0.60
0.50 max 0.50 max
4.75–5.50 4.75–5.50
0.30 max 0.30 max
0.90–1.40 0.90–1.40
S1 S5
T41901 T41905 T41907
0.40–0.55 0.50–0.65 0.45–0.55
0.10–0.40 0.60–1.00 0.20–0.80
0.15–1.20 1.75–2.25 0.20–1.00
1.00–1.80 0.35 max 3.00–3.50
0.30 max
0.50 max 0.20–1.35 1.30–1.80
W
V
8.50–10.00 17.25–19.00
0.30–0.60 0.75–1.25
0.15–0.50 0.80–1.40
Shock–resisting steels S1 S5 S7
1.50–3.00
Source: data from ASM Metals Reference Book, Second Edition, American Society for Metals, Metals Park, Ohio 44073, p.239, (1984).
©2001 CRC Press LLC
0.15–0.30 0.35 max 0.20–0.30
Co
4.1 Composition L Page 107 Wednesday, December 31, 1969 17:00
Table 46. COMPOSITION LIMITS OF (SHEET 3 OF 3) Designations AISI
SAE
TOOL STEELS Composition (%)
UNS
C
Mn
Si
Cr
Ni
Mo
T61202 T61206
0.45–1.00 0.65–0.75
0.10–0.90 0.25–0.80
0.50 max 0.50 max
0.70–1.20 0.60–1.20
1.25–2.00
0.25 max 0.50 max
T72301
0.70–1.50
0.10–0.40
0.10–0.40
0.15 max
0.20 max
0.10 max
W
V
Low–alloy special–purpose tool steels L2 L6
L6
0.10–0.30 0.20–0.30
Water–hardening tool steels W1
W108, W109, W110, W112
0.15 max
Source: data from ASM Metals Reference Book, Second Edition, American Society for Metals, Metals Park, Ohio 44073, p.239, (1984).
©2001 CRC Press LLC
0.10 max
Co
4.1 Composition L Page 108 Wednesday, December 31, 1969 17:00
Table 47. COMPOSITION
LIMITS OF GRAY CAST IRONS Composition Limits (%)
UNS
SAE grade
TC
Mn
Si
P
S
F10004
G1800
3.40 to 3.70
0.50 to 0.80
2.80 to 2.30
0.15
0.15
F10005 F10009
G2500 G2500
3.20 to 3.50 3.40 min
0.60 to 0.90 0.60 to 0.90
2.40 to 2.00 1.60 to 2.10
0.12 0.12
0.15 0.12
F10006 F10007
G3000 G3500
3.10 to 3.40 3.00 to 3.30
0.60 to 0.90 0.60 to 0.90
2.30 to 1.90 2.20 to 1.80
0.10 0.08
0.16 0.16
F10010 F10011
G3500 G3500
3.40 min 3.50 min
0.60 to 0.90 0.60 to 0.90
1.30 to 1.80 1.30 to 1.80
0.08 0.08
0.12 0.12
F10008 F10012
G4000 G4000
3.00 to 3.30 3.10 to 3.60
0.70 to 1.00 0.60 to 0.90
2.10 to 1.80 1.95 to 2.40
0.07 0.07
0.16 0.12
Source: data from ASM Metals Reference Book, Second Edition, American Society for Metals, Metals Park, Ohio 44073, p.166, (1984).
©2001 CRC Press LLC
4.1 Composition L Page 109 Wednesday, December 31, 1969 17:00
Table 48. COMPOSITION
LIMITS OF DUCTILE IRONS
Specification No. Grade or Class
Composition (%) UNS
TC
Si
Mn
P
S
ASTM A395 ASME SA395 60-40-18
F32800
3.00 min
2.50 max
0.08 max
ASTM A476 SAE AM55316 80-60-03
F34100
3.00 min
3.0 max
0.08 max
SAE J434c D4018
F32800
3.20–4.10
1.80-3.00
0.10-1.00
0.015-0.10
0.005–0.035
MIL-1-24137 (Ships) Class A Class B Class C
F33101 F43020 F43021
3.0 min 2.40-3.00 2.70-3.10
2.50 max 1.80-3.20 2.00-3.00
0.08 max 0.80-1.50 1.90-2.50
0.20 max 0.15 max
Source: Data from ASM Metals Reference Book, Second Edition, American Society for Metals, Metals Park, Ohio 44073, p.168-169,
(1984).
©2001 CRC Press LLC
4.1 Composition L Page 110 Wednesday, December 31, 1969 17:00
Table 49. COMPOSITION
RANGES FOR MALLEABLE IRONS Composition (%)
Type
TC
Mn
Si
P
S
Ferritic Grade 32510 Grade 35018
2.30-2.70 2.00-2.45
0.25-0.55 0.25-0.55
1.00-1.75 1.00-1.35
0.05 max 0.05 max
0.03-0.18 0.03-0.18
Pearlitic
2.00-2.70
0.25-1.25
1.00-1.75
0.05 max
0.03-0.18
Source: Data from ASM Metals Reference Book, Second Edition, American Society for Metals, Metals Park, Ohio 44073, p170, (1984).
©2001 CRC Press LLC
4.1 Composition L Page 111 Wednesday, December 31, 1969 17:00
Table 50. COMPOSITION
RANGES FOR CARBON STEELS Composition Range (%)
AISI–SAE Designation
UNS Designation
C
Mn
1015 1020 1022
G10150 G10200 G10220
0.12-0.18 0.17-0.23 0.17-0.23
0.30-0.60 0.30-0.60 0.70-1.00
1030 1040 1050
G10900 G10400 G10500
0.27-0.34 0.36-0.44 0.47-0.55
0.60-0.90 0.60-0.90 0.60-0.90
1060 1080 1095
G10600 G10800 G10950
0.55-0.66 0.74-0.88 0.90-1.04
0.60-0.90 0.60-0.90 0.30-0.50
Source: Data from ASM Metals Reference Book, Second Edition, American Society for Metals, Metals Park, Ohio 44073, p184, (1984).
©2001 CRC Press LLC
4.1 Composition L Page 112 Wednesday, December 31, 1969 17:00
Table 51. COMPOSITION
RANGES FOR RESULFURIZED CARBON STEELS Composition Range (%)
AISI–SAE Designation
UNS Designation
C
Mn
S
1118 1137 1141 1144
G11180 G11370 G11410 G11440
0.14-0.20 0.32-0.39 0.37-0.45 0.40-0.48
1.30-1.60 1.35-1.65 1.35-1.65 1.35-1.65
0.08-0.13 0.08-0.13 0.08-0.13 0.24-0.33
Source: Data from ASM Metals Reference Book, Second Edition, American Society for Metals, Metals Park, Ohio 44073, p185, (1984).
©2001 CRC Press LLC
4.1 Composition L Page 113 Wednesday, December 31, 1969 17:00
Table 52. COMPOSITION RANGES FOR (SHEET 1 OF 3)
ALLOY STEELS
Composition Range (%) AISI–SAE Designation
UNS Designation
1330 1340 3140 4037
G13300 G13400
C
Mn
P (max)
S (max)
Si
Cr
Ni
1.60-1.90 1.60-1.90 0.70-0.90 0.70-0.90
0.035 0.035 0.040 0.035
0.040 0.040 0.040 0.040
0.15-0.30 0.15-0.30 0.20-0.35 0.15-0.30
0.55-0.75 0.20-0.30
1.10-1.40
G40370
0.28-0.33 0.38-0.43 0.38-0.43 0.35-0.40
4042 4130 4140 4150
G40420 G41300 G41400 G41500
0.40-0.45 0.28-0.33 0.38-0.43 0.48-0.53
0.70-0.90 0.40-0.60 0.75-1.00 0.75-1.00
0.035 0.035 0.035 0.035
0.040 0.040 0.040 0.040
0.15-0.30 0.15-0.30 0.15-0.30 0.15-0.30
0.20-0.30 0.80-1.10 0.80-1.10 0.80-1.10
4320 4340 4620 4820
G43200 G43400 G46200 G48200
0.17-0.22 0.38-0.43 0.17-0.22 0.18-0.23
0.45-0.65 0.60-0.80 0.45-0.65 0.50-0.70
0.035 0.035 0.035 0.035
0.040 0.040 0.040 0.040
0.15-0.30 0.15-0.30 0.15-0.30 0.15-0.30
0.40-0.60 0.70-0.90 1.65-2.00 3.25-3.75
0.15-0.25 0.15-0.25 0.15-0.25 1.65-2.00 1.65-2.00
(a) Contains 0.15% min vanadium. Source: Data from ASM Metals Reference Book, Second Edition, American Society for Metals, Metals Park, Ohio 44073, p186-193, (1984).
©2001 CRC Press LLC
Mo
0.20-0.30 0.20-0.30 0.20-0.30 0.20-0.30
4.1 Composition L Page 114 Wednesday, December 31, 1969 17:00
Table 52. COMPOSITION RANGES FOR (SHEET 2 OF 3)
ALLOY STEELS
Composition Range (%) AISI–SAE Designation
UNS Designation
C
Mn
P (max)
S (max)
Si
Cr
5046 50B46 5060 50B60
G50460 G50461 G50600 G50461
0.43-0.48 0.44-0.49 0.56-0.64 0.56-0.64
0.75-1.00 0.75-1.00 0.75-1.00 0.75-1.00
0.035 0.035 0.035 0.035
0.040 0.040 0.040 0.040
0.15-0.30 0.15-0.30 0.15-0.30 0.15-0.30
0.20-0.35 0.20-0.35 0.40-0.60 0.40-0.60
5130 5140 5150 5160
G51300 G51400 G51500 G51600
0.28-0.33 0.38-0.43 0.48-0.53 0.56-0.64
0.70-0.90 0.70-0.90 0.70-0.90 0.75-1.00
0.035 0.035 0.035 0.035
0.040 0.040 0.040 0.040
0.15-0.30 0.15-0.30 0.15-0.30 0.15-0.30
0.80-1.10 0.70-0.90 0.70-0.90 0.70-0.90
51B60 6150(a) 81B45 8620
G51601 G61500 G81451 G86200
0.56-0.64 0.48-0.53 0.43-0.48 0.18-0.23
0.75-1.00 0.70-0.90 0.75-1.00 0.70-0.90
0.035 0.035 0.035 0.035
0.040 0.040 0.040 0.040
0.15-0.30 0.15-0.30 0.15-0.30 0.15-0.30
8630 8640
G86300 G86400
0.28-0.33 0.38-0.43
0.70-0.90 0.75-1.00
0.035 0.035
0.040 0.040
0.15-0.30 0.15-0.30
Ni
Mo
0.70-0.90 0.80-1.10 0.35-0.55 0.40-0.60
0.20-0.40 0.40-0.70
0.08-0.15 0.15-0.25
0.40-0.60 0.40-0.60
0.40-0.70 0.40-0.70
0.15-0.25 0.15-0.25
(a) Contains 0.15% min vanadium. Source: Data from ASM Metals Reference Book, Second Edition, American Society for Metals, Metals Park, Ohio 44073, p186-193, (1984).
©2001 CRC Press LLC
4.1 Composition L Page 115 Wednesday, December 31, 1969 17:00
Table 52. COMPOSITION RANGES FOR (SHEET 3 OF 3)
ALLOY STEELS
Composition Range (%) AISI–SAE Designation
UNS Designation
C
Mn
P (max)
S (max)
Si
Cr
Ni
Mo
86B45 8650
G86451 G86500
0.43-0.48 0.48-0.53
0.75-1.00 0.75-1.00
0.035 0.035
0.040 0.040
0.15-0.30 0.15-0.30
0.40-0.60 0.40-0.60
0.40-0.70 0.40-0.70
0.15-0.25 0.15-0.25
8660 8740 9255 9260
G86600 G87400 G92550 G92600
0.56-0.64 0.38-0.43 0.51-0.59 0.56-0.64
0.75-1.00 0.75-1.00 0.70-0.95 0.75-1.00
0.035 0.035 0.035 0.035
0.040 0.040 0.040 0.040
0.15-0.30 0.15-0.30 1.80-2.20 1.80-2.20
0.40-0.60 0.40-0.60
0.40-0.70 0.40-0.70
0.15-0.25 0.20-0.30
9310 94B30
G93106 G94301
0.08-0.13 0.28-0.33
0.45-0.65 0.75-1.00
0.025 0.035
0.025 0.040
0.15-0.30 0.15-0.30
1.00-1.40 0.30-0.50
3.00-3.50 0.30-0.60
0.08-0.15 0.08-0.15
(a) Contains 0.15% min vanadium. Source: Data from ASM Metals Reference Book, Second Edition, American Society for Metals, Metals Park, Ohio 44073, p186-193, (1984).
©2001 CRC Press LLC
4.1 Composition L Page 116 Wednesday, December 31, 1969 17:00
Table 53. COMPOSITION OF STAINLESS (SHEET 1 OF 8)
STEELS
Composition (%) UNS Number
C
Mn
Si
Cr
Ni
P
S
Others
201 202 205 301
S20100 S20200 S20500 S30100
0.15 0.15 0.12–0.25 0.15
5.5–7.5 7.5-10.0 14.0–15.5 2.00
1.00 1.00 1.00 1.00
16.0–18.0 17.0–19.0 16.5–18.0 16.0–18.0
3.5–5.5 4.0–6.0 1.0–1.75 6.0–8.0
0.06 0.06 0.06 0.045
0.03 0.03 0.03 0.03
0.25 N 0.25 N 0.32–0.40 N —
302 302B 303 303Se
S30200 S30215 S30300 S30323
0.15 0.15 0.15 0.15
2.00 2.00 2.00 2.00
1.00 2.0–3.0 1.00 1.00
17.0–19.0 17.0–19.0 17.0–19.0 17.0–19.0
8.0–10.0 8.0–10.0 8.0–10.0 8.0–10.0
0.045 0.045 0.20 0.20
0.03 0.03 0.15 min 0.06
— — 0.6 Mo(c) 0.15 Se min
304 304H 304L 304LN
S30400 S30409 S30403 —
0.08 0.04-0.10 0.03 0.03
2.00 2.00 2.00 2.00
1.00 1.00 1.00 1.00
18.0–20.0 18.0–20.0 18.0–20.0 18.0–20.0
8.0–10.5 8.0–10.5 8.0–12.0 8.0–10.5
0.045 0.045 0.045 0.045
0.03 0.03 0.03 0.03
— — 0.10-0.15 N
Type Austenitic
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p357-358, (1993).
©2001 CRC Press LLC
4.1 Composition L Page 117 Wednesday, December 31, 1969 17:00
Table 53. COMPOSITION OF STAINLESS (SHEET 2 OF 8)
STEELS
Composition (%) Type
UNS Number
C
Mn
Si
Cr
Ni
P
S
Others
S30430 304N 30S 308
S30430 S30451 S30500 S30800
0.08 0.08 0.12 0.08
2.00 2.00 2.00 2.00
1.00 1.00 1.00 1.00
17.0–19.0 18.0-20.0 17.0–19.0 19.0–21.0
8.0–10.0 8.0–10.5 10.S–13.0 10.0–12.0
0.045 0.045 0.045 0.045
0.03 0.03 0.03 0.03
3.0–4.0 Cu 0.10–0.16 N — —
309 309S 310 310S
S30900 S30908 S31000 S31008
0.20 0.08 0.25 0.08
2.00 2.00 2.00 2.00
1.00 1.00 1.50 1.50
22.0–24.0 22.0–24.0 24.0–26.0 24.0–26.0
12.0 15.0 12.0–15.0 19.0–22.0 19.0–22.0
0.045 0.045 0.045 0.045
0.03 0.03 0.03 0.03
— — — —
314 316 316F 316H
S31400 S31600 S31620 S31609
0.25 0.08 0.08 0.04-0.10
2.00 2.00 2.00 2.00
1.5–3.0 1.00 1.00 1.00
23.0–26.0 16.0–18.0 16.0–18.0 16.0–18.0
19.0–22.0 10.0–14.0 10.0–14.0 10.0–14.0
0.045 0.045 0.20 0.045
0.03 0.03 0.10 min 0.03
— 2.0–3.0 Mo 1.75–2.5 Mo 2.0–3.0 Mo
316L 316LN 316N 317
S31603 — S31651 S31700
0.03 0.03 0.08 0.08
2.00 2.00 2.00 2.00
1.00 1.00 1.00 1.00
16.0-18.0 16.0–18.0 16.0–18.0 18.0–20.0
10.0–14.0 10.0–14.0 10.0–14.0 11.0–15.0
0.045 0.045 0.045 0.045
0.03 0.03 0.03 0.03
2.0–3.0 Mo 2.0–3.0 Mo;0.10–0.30 N 2.0–3.0 Mo;0.10–0.16 N 3.0–4.0 Mo
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p357-358, (1993).
©2001 CRC Press LLC
4.1 Composition L Page 118 Wednesday, December 31, 1969 17:00
Table 53. COMPOSITION OF STAINLESS (SHEET 3 OF 8)
STEELS
Composition (%) Type
UNS Number
C
Mn
Si
Cr
Ni
P
S
Others
317L 321 321H 329
S31703 S32100 S32109 S32900
0.03 0.08 0.04–0.10 0.10
2.00 2.00 2.00 2.00
1.00 1.00 1.00 1.00
18.0–20.0 17.0–19.0 17.0–19.0 25.0–30.0
11.0–15.0 9.0–12.0 9.0–12.0 3.0–6.0
0.045 0.045 0.045 0.045
0.03 0.03 0.03 0.03
3.0–4.0 Mo 5 x %C Ti min 5 x %C Ti min 1.0–2.0 Mo
330 347 347H
N08330 S34700 S34709
0.08 0.08 0.04–0.10
2.00 2.00 2.00
0.75–1.5 1.00 1.00
17.0–20.0 17.0–19.0 17.0–19.0
34.0–37.0 9.0–13.0 9.0–13.0
0.04 0.045 0.045
0.03 0.03 0.03
348
S34800
0.08
2.00
1.00
17.0–19.0
9.0–13.0
0.045
0.03
— 10 x %C Nb + Ta(d)min 10 x %C Nb + Ta min 0.2 Cu; 10 x %C Nb + Ta(d) min
348H
S34809
0.04–0.10
2.00
1.00
17.0–19.0
9.0–13.0
0.045
0.03
384
S38400
0.08
2.00
1.00
15.0–17.0
17.0–19.0
0.045
0.03
0.2 Cu; 10 x %C Nb + Ta(d) min —
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p357-358, (1993).
©2001 CRC Press LLC
4.1 Composition L Page 119 Wednesday, December 31, 1969 17:00
Table 53. COMPOSITION OF STAINLESS (SHEET 4 OF 8)
STEELS
Composition (%) UNS Number
C
Mn
Si
Cr
Ni
P
S
Others
405 409 429
S40500 S40900 S42900
0.08 0.08 0.12
1.00 1.00 1.00
1.00 1.00 1.00
11.5–14.5 10.5–11.75 14.0–16.0
— — —
0.04 0.045 0.04
0.03 0.045 0.03
0.10-0.30 Al 6 x %C Ti(e)min —
430 430F 430FSe
S43000 S43020 S43023
0.12 0.12 0.12
1.00 1.25 1.25
1.00 1.00 1.00
16.0–18.0 16.0–18.0 16.0–18.0
— — —
0.04 0.06 0.06
0.03 0.15 0.06
— 0.6 Mo(c) 0.15 Se min
434
S43400
0.12
1.00
1.00
16.0–18.0
—
0.04
0.03
0.75–1.25 Mo
436
S43600
0.12
1.00
1.00
16.0–18.0
—
0.04
0.03
0.75–1.25 Mo;5 x %C Nb + Ta(f) min
442 446
S44200 S44600
0.20 0.20
1.00 1.50
1.00 1.00
18.0–23.0 23.0–27.0
— —
0.04 0.04
0.03 0.03
— 0.25 N
Type Ferritic
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p357-358, (1993).
©2001 CRC Press LLC
4.1 Composition L Page 120 Wednesday, December 31, 1969 17:00
Table 53. COMPOSITION OF STAINLESS (SHEET 5 OF 8)
STEELS
Composition (%) UNS Number
C
Mn
Si
Cr
Ni
P
S
Others
403 410
S40300 S41000
0.15 0.15
1.00 1.00
0.50 1.00
11.5–13.0 11.5–13.0
— —
0.04 0.04
0.03 0.03
—
414 416 416Se 420
S41400 S41600 S41623 S42000
0.15 0.15 0.15 0.15 min
1.00 1.25 1.25 1.00
1.00 1.00 1.00 1.00
11.5–13.5 12.0–14.0 12.0–14.0 12.0–14.0
1.25–2.50 — — —
0.04 0.04 0.06 0.04
0.03 0.03 0.06 0.03
— 0.6 Mo(c) 0.15 Se min —
420F
S42020
0.15 min
1.25
1.00
12.0–14.0
—
0.06
0.15 min
422
S42200
0.2–0.25
1.00
0.75
11.0–13.0
0.5–1.0
0.025
0.025
431 440A
S43100 S44002
0.20 0.60–0.75
1.00 1.00
1.00 1.00
15.0–17.0 16.0–18.0
1.25–2.50 —
0.04 0.04
0.03 0.03
0.6Mo(c) 0.75–1.25 Mo;0.75–1.25 W; 0.15–0.3 V — 0.75 Mo
Type Martensitic
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p357-358, (1993).
©2001 CRC Press LLC
4.1 Composition L Page 121 Wednesday, December 31, 1969 17:00
Table 53. COMPOSITION OF STAINLESS (SHEET 6 OF 8)
STEELS
Composition (%) Type
UNS Number
C
Mn
Si
Cr
Ni
P
S
Others
440B 440C 501 501A
S44003 S44004 S50100 S50300
0.75–0.95 0.95–1.20 0.10 min 0.15
1.00 1.00 1.00 0.30–0.60
1.00 1.00 1.00 0.50–1.00
16.0–18.0 16.0–18.0 4.0–6.0 6.0–8.0
— — — —
0.04 0.04 0.04 0.03
0.03 0.03 0.03 0.03
0.75 Mo 0.75 Mo 0.40–0.65Mo 0.45–0.65Mo
501B 502 503 504
S50400 S50200 S50300 S50400
0.15 0.10 0.15 0.15
0.30–0.60 1.00 1.00 1.00
0.50–1.00 1.00 1.00 1.00
8.0–10.0 4.0–6.0 6.0–8.0 8.0–10.0
— — — —
0.03 0.04 0.04 0.04
0.03 0.03 0.04 0.04
0.9–1.1 Mo 0.40–4.65Mo 0.45–0.65Mo 0.9–1.1 Mo
PH 13–8Mo
S13800
0.05
0.10
0.10
12.25–13.25
7.5–8.5
0.01
0.008
2.0–2.5 Mo; 0.90–1.35 Al; 0.01 N
15–5 PH
S15500
0.07
1.00
1.00
14.0–15.5
3.5–5.5
0.04
0.03
2.5–4.5 Cu;0.15–0.45 Nb+Ta
Precipitation– hardening
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p357-358, (1993).
©2001 CRC Press LLC
4.1 Composition L Page 122 Wednesday, December 31, 1969 17:00
Table 53. COMPOSITION OF STAINLESS (SHEET 7 OF 8)
STEELS
Composition (%) Type
UNS Number
C
Mn
Si
Cr
Ni
P
S
Others
17–4 PH
S17400
0.07
1.00
1.00
15.5–17.5
3.0–5.0
0.04
0.03
17–7 PH
S17700
0.09
1.00
1.00
16.0–18.0
6.5–7.75
0.04
0.03
3.0–5.0 Cu;0.15–0.45 Nb+Ta 0.75–1.5 Al
414 416 416Se 420
S41400 S41600 S41623 S42000
0.15 0.15 0.15 0.15 min
1.00 1.25 1.25 1.00
1.00 1.00 1.00 1.00
11.5–13.5 12.0–14.0 12.0–14.0 12.0–14.0
1.25–2.50 — — —
0.04 0.04 0.06 0.04
0.03 0.03 0.06 0.03
— 0.6 Mo(c) 0.15 Se min —
420F
S42020
0.15 min
1.25
1.00
12.0–14.0
—
0.06
0.15 min
422
S42200
0.2–0.25
1.00
0.75
11.0–13.0
0.5–1.0
0.025
0.025
431 440A
S43100 S44002
0.20 0.60–0.75
1.00 1.00
1.00 1.00
15.0–17.0 16.0–18.0
1.25–2.50 —
0.04 0.04
0.03 0.03
0.6Mo(c) 0.75–1.25 Mo;0.75–1.25 W; 0.15–0.3 V — 0.75 Mo
440B 440C 501 501A
S44003 S44004 S50100 S50300
0.75–4.95 0.95–1.20 0.10 min 0.15
1.00 1.00 1.00 0.30–0.60
1.00 1.00 1.00 0.50–1.00
16.0–18.0 16.0–18.0 4.0–6.0 6.0–8.0
— — — —
0.04 0.04 0.04 0.03
0.03 0.03 0.03 0.03
0.75 Mo 0.75 Mo 0.40–0.65Mo 0.45–0.65Mo
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p357-358, (1993).
©2001 CRC Press LLC
4.1 Composition L Page 123 Wednesday, December 31, 1969 17:00
Table 53. COMPOSITION OF STAINLESS (SHEET 8 OF 8)
STEELS
Composition (%) Type
UNS Number
C
Mn
Si
Cr
Ni
P
S
Others
501B 502 503 504
S50400 S50200 S50300 S50400
0.15 0.10 0.15 0.15
0.30–0.60 1.00 1.00 1.00
0.50–1.00 1.00 1.00 1.00
8.0–10.0 4.0–6.0 6.0–8.0 8.0–10.0
— — — —
0.03 0.04 0.04 0.04
0.03 0.03 0.04 0.04
0.9–1.1 Mo 0.40–4.65Mo 0.45–0.65Mo 0.9–1.1 Mo
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p357-358, (1993).
©2001 CRC Press LLC
4.1 Composition L Page 124 Wednesday, December 31, 1969 17:00
Table 54. COMPOSITION OF
WROUGHT COPPERS AND COPPER ALLOYS * (SHEET 1 OF 11)
UNS Number and Name
Nominal Composition (%)
Commercial Forms(a)
C10100 Oxygen-free electronic C10200 Oxygen-free copper C10300 Oxygen-free extra-low phosporus C10400, C10500, C10700 Oxygen-free, silver-bearing
99.99 Cu 99.95 Cu 99.95 Cu, 0.003 P 99.95 Cu(b)
F, R, W, T, P, S F, R, W, T, P, S F, R, T, P, S F, R, W, S
C10800 Oxygen-free, low phosporus CS11000 Electrolytic tough pitch copper C11100 Electrolytic tough pitch, anneal resistant C11300, C11400, C11500, C11600 Silver-bearing tough pitch copper
99.95 Cu, 0.009 P 99.90 Cu, 0.04 O 99.90 Cu, 0.04 O, 0.01 Cd 99.90 Cu, 0.04 O, Ag(c)
F, R, T, P F, R, W, T, P, S W F, R, W, T, S
C12000, C12100 C12200 Phosphorus deoxidized copper, high residual phosphorus C12500, C12700, C12800, C12900, C13000 Fire-refined tough pitch with silver C14200 Phosphorus deoxidized, arsenical
99.9 Cu(d) 99.90 Cu, 0.02 P 99.88 Cu(e) 99.68 Cu, 0.3 As, 0.02 P
F, T, P F, R, T, P F, R, W, S F, R, T
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p442–454, (1993).
©2001 CRC Press LLC
4.1 Composition L Page 125 Wednesday, December 31, 1969 17:00
Table 54. COMPOSITION OF
WROUGHT COPPERS AND COPPER ALLOYS * (SHEET 2 OF 11)
UNS Number and Name
Nominal Composition (%)
Commercial Forms(a)
C19200 C14300 C14310 C14500 Phosphorus deoxidized, tellurium bearing
98.97 Cu, 1.0 Fe, 0.03 P 99.9 Cu, 0.1 Cd 99.8 Cu, 0.2 Cd 99.5 Cu, 0.50 Te, 0.008 P
F, T F F F, R, W, T
C14700 Sulfur bearing C15000 Zirconium copper C15500 C15710
99.6 Cu, 0.40 S 99.8 Cu, 0.15 Zr 99.75 Cu, 0.06 P, 0.11 Mg, Ag(f) 99.8 Cu, 0.2 Al2O3
R, W R, W F R, W
C15720 C15735 C15760 C16200 Cadmium copper
99.6 Cu, 0.4 Al2O3 99.3 Cu, 0.7 Al2O3 98.9 Cu, 1.1 Al2O3 99.0 Cu, 1.0 Cd
F, R R F, R F, R, W
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p442–454, (1993).
©2001 CRC Press LLC
4.1 Composition L Page 126 Wednesday, December 31, 1969 17:00
Table 54. COMPOSITION OF
WROUGHT COPPERS AND COPPER ALLOYS * (SHEET 3 OF 11)
UNS Number and Name
Nominal Composition (%)
Commercial Forms(a)
C16500 C17000 Beryllium copper C17200 Beryllium copper C17300 Beryllium copper
98.6 Cu, 0.8 Cd, 0.6 Sn 99.5 Cu, 1.7 Be, 0.20 Co 99.5 Cu, 1.9 Be , 0.20 Co 99.5 Cu, 1.9 Be, 0.40 Pb
F, R, W F, R F, R, W, T, P, S R
C17500 Copper-cobalt-beryllium alloy C18200, C18400, C18500 Chromium copper C18700 leaded copper C18900
99.5 Cu, 2.5 Co, 0.6 Be 99.5 Cu(g) 99.0 Cu, 1.0 Pb 98.75 Cu, 0.75 Sn, 0.3 Si, 0.20 Mn
F, R F, W, R, S, T R R, W
C19000 Copper-nickel-phosphorus alloy C19100 Copper-nickel-phosphorus-tellurium alloy C19400
98.7 Cu, 1.1 Ni, 0.25 P 98.15 Cu, 1.1 Ni, 0.50 Te, 0.25 P 97.5 Cu, 2.4 Fe, 0.13 Zn, 0.03 P
F, R, W R, F F
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p442–454, (1993).
©2001 CRC Press LLC
4.1 Composition L Page 127 Wednesday, December 31, 1969 17:00
Table 54. COMPOSITION OF
WROUGHT COPPERS AND COPPER ALLOYS * (SHEET 4 OF 11)
UNS Number and Name
Nominal Composition (%)
Commercial Forms(a)
C19500 C21000 Gilding, 95% C22000 Commercial bronze, 90% C22600 Jewelry bronze, 87.5%
97.0 Cu, 1.5 Fe, 0.6 Sn, 0.10 P, 0.80 Co 95.0 Cu, 5.0 Zn 90.0 Cu, 10.0 Zn 87.5 Cu, 12.5 Zn
F F, W F, R, W, T F, W
C23000 Red brass, 85% C24000 Low brass, 80% C26000 Cartridge brass, 70% C26800, C27000 Yellow brass
85.0 Cu, 15.0 Zn 80.0 Cu, 20.0 Zn 70.0 Cu, 30.0 Zn 65.0 Cu, 35.0 Zn
F, W, T, P F, W F, R, W, T F, R, W
C28000 Muntz metal C31400 Leaded commercial bronze C31600 Leaded commercial bronze, nickel-bearing C33000 Low-leaded brass tube
60.0 Cu, 40.0 Zn 89.0 Cu, 1.75 Pb, 9.25 Zn 89.0 Cu, 1.9 Pb, 1.0 Ni, 8.1 Zn 66.0 Cu, 0.5 Pb, 33.5 Zn
F, R, T F, R F, R T
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p442–454, (1993).
©2001 CRC Press LLC
4.1 Composition L Page 128 Wednesday, December 31, 1969 17:00
Table 54. COMPOSITION OF
WROUGHT COPPERS AND COPPER ALLOYS * (SHEET 5 OF 11)
UNS Number and Name
Nominal Composition (%)
Commercial Forms(a)
C33200 High-leaded brass tube C33500 Low-leaded brass C34000 Medium-leaded brass C34200 High-leaded brass
66.0 Cu, 1.6 Pb, 32.4 Zn 65.0 Cu, 0.5 Pb, 34.5 Zn 65.0 Cu, 1.0 Pb, 34.0 Zn 64.5 Cu, 2.0 Pb, 33.5 Zn
T F F, R, W, S F, R
C34900 C35000 Medium-leaded brass C35300 High-leaded brass C35600 Extra-high-leaded brass
62.2 Cu, 0.35 Pb, 37.45 Zn 62.5 Cu, 1.1 Pb, 36.4 Zn 62.0 Cu, 1.8 Pb, 36.2 Zn 63.0 Cu, 2.5 Pb, 34.5 Zn
R, W F, R F, R F
C36000 Free-cutting brass C36500 to C36800 Leaded Muntz metal C37000 Free-cutting Muntz metal C37700 Forging brass
61.5 Cu, 3.0 Pb, 35.5 Zn 60.0 Cu(h), 0.6 Pb, 39.4 Zn 60.0 Cu, 1.0 Pb, 39.0 Zn 59.0 Cu, 2.0 Pb, 39.0 Zn
F, R, S F T R, S
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p442–454, (1993).
©2001 CRC Press LLC
4.1 Composition L Page 129 Wednesday, December 31, 1969 17:00
Table 54. COMPOSITION OF
WROUGHT COPPERS AND COPPER ALLOYS * (SHEET 6 OF 11)
UNS Number and Name
Nominal Composition (%)
Commercial Forms(a)
C38500 Architectural bronze C40500 C40800 C41100
57.0 Cu, 3.0 Pb, 40.0 Zn 95 Cu, 1 Sn, 4 Zn 95 Cu, 2Sn, 3 Zn 91 Cu, 0.5 Sn, 8.5 Zn
R, S F F F, W
C41300 C41500 C42200 C42500
90.0 Cu, 1.0 Sn, 9.0 Zn 91 Cu, 1.8 Sn, 7.2 Zn 87.5 Cu, 1.1 Sn, 11.4 Zn 88.5 Cu, 2.0 Sn, 9.5 Zn
F, R, W F F F
C43000 C43400 C43500 C44300, C44400, C44500 Inhibited admiralty
87.0 Cu, 2.2 Sn, 10.8 Zn 85.0 Cu, 0.7 Sn, 14.3 Zn 81.0 Cu, 0.9 Sn, 18.1 Zn 71.0 Cu, 28.0 Zn, 1.0 Sn
F F F, T F, W, T
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p442–454, (1993).
©2001 CRC Press LLC
4.1 Composition L Page 130 Wednesday, December 31, 1969 17:00
Table 54. COMPOSITION OF
WROUGHT COPPERS AND COPPER ALLOYS * (SHEET 7 OF 11)
UNS Number and Name
Nominal Composition (%)
Commercial Forms(a)
C46400 to C46700 Naval brass C48200 Naval brass, medium-leaded C48500 Leaded naval brass C50500 Phosphor bronze, 1.25% E
60.0 Cu, 39.25 Zn, 0.75 Sn 60.5 Cu, 0.7 Pb, 0.8 Sn, 38.0 Zn 60.0 Cu, 1.75 Pb, 37.5 Zn, 0.75 Sn 98.75 Cu, 1.25 Sn, trace P
F, R, T, S F, R, S F, R, S F, W
C51000 Phosphor bronze, 5% A C51100 C52100 Phosphor bronze, 8% C C52400 Phosphor bronze, 10% D
95.0 Cu, 5.0 Sn, trace P 95.6 Cu, 4.2 Sn, 0.2 P 92.0 Cu, 8.0 Sn, trace P 90.0 Cu, 10.0 Sn, trace P
F, R, W, T F F, R, W F, R, W
C54400 Free-cutting phosphor bronze C60800 Aluminum bronze, 5% C61000 C61300
88.0 Cu, 4.0 Pb, 4.0 Zn, 4.0 Sn 95.0 Cu, 5.0 Al 92.0 Cu, 8.0 Al 92.65 Cu, 0.35 Sn, 7.0 Al
F, R T R, W F, R, T, P, S
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p442–454, (1993).
©2001 CRC Press LLC
4.1 Composition L Page 131 Wednesday, December 31, 1969 17:00
Table 54. COMPOSITION OF
WROUGHT COPPERS AND COPPER ALLOYS * (SHEET 8 OF 11)
UNS Number and Name
Nominal Composition (%)
Commercial Forms(a)
C61400 Aluminum bronze, D C61500 C61800 C61900
91.0 Cu, 7.0 Al, 2.0 Fe 90.0 Cu, 8.0 Al, 2.0 Ni 89.0 Cu, 1.0 Fe, 10.0 Al 86.5 Cu, 4.0 Fe, 9.5 Al
F, R, W, T, P, S F R F
C62300 C62400 C62500 C63000
87.0 Cu, 10.0 Al, 3.0 Fe 86.0 Cu, 3.0 Fe, 11.0 Al 82.7 Cu, 4.3 Fe, 13.0 Al 82.0 Cu, 3.0 Fe, 10.0 Al, 5.0 Ni
F, R F, R F, R F, R
C63200 C63600 C63800 C64200
82.0 Cu, 4.0 Fe, 9.0 Al, 5.0 Ni 95.5 Cu, 3.5 Al, 1.0 Si 99.5 Cu, 2.8 Al, 1.8 Si, 0.40 Co 91.2 Cu, 7.0 Al
F, R R, W F F, R
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p442–454, (1993).
©2001 CRC Press LLC
4.1 Composition L Page 132 Wednesday, December 31, 1969 17:00
Table 54. COMPOSITION OF
WROUGHT COPPERS AND COPPER ALLOYS * (SHEET 9 OF 11)
UNS Number and Name
Nominal Composition (%)
Commercial Forms(a)
C65100 Low-silicon bronze, B C65500 High-silicon bronze, A C66700 Manganese brass C67400
98.5 Cu, 1.5 Si 97.0 Cu, 3.0 Si 70.0 Cu, 28.8 Zn, 1.2 Mn 58.5 Cu, 36.5 Zn, 1.2 Al, 2.8 Mn, 1.0 Sn
R, W, T F, R, W, T F, W F, R
C67500 Manganese bronze, A C68700 Aluninum brass, arsenical C68800 C69000
58.5 Cu, 1.4 Fe, 39.0 Zn, 1.0 Sn, 0.1 Mn 77.5 Cu, 20.5 Zn, 2.0 Al, 0.1 As 73.5 Cu, 22.7 Zn, 3.4 Al, 0.40 Co 73.3 Cu, 3.4 Al, 0.6 Ni, 22.7 Zn
R, S T F F
C69400 Silicon red brass C70400 C70600 Copper nickel, 10% C71000 Copper nickel, 20%
81.5 Cu, 14.5 Zn, 4.0 Si 92.4 Cu, 1.5 Fe, 5.5 Ni, 0.6 Mn 88.7 Cu, 1.3 Fe, 10.0 Ni 79.0 Cu, 21.0 Ni
R F, T F, T F, W, T
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p442–454, (1993).
©2001 CRC Press LLC
4.1 Composition L Page 133 Wednesday, December 31, 1969 17:00
Table 54. COMPOSITION OF
WROUGHT COPPERS AND COPPER ALLOYS * (SHEET 10 OF 11)
UNS Number and Name
Nominal Composition (%)
Commercial Forms(a)
C71500 Copper nickel, 30% C71700 C72500 C73500
70.0 Cu, 30.0 Ni 67.8 Cu, 0.7 Fe, 31.0 Ni, 0.5 Be 88.20 Cu, 9.5 Ni, 2.3 Sn 72.0 Cu, 18.0 Ni , 10.0 Zn
F, R, T F, R, W F, R, W, T F, R, W, T
C74500 Nickel silver, 65-10 C75200 Nickel silver, 65-18 C75400 Nickel silver, 65-15 C75700 Nickel silver, 65-12
65.0 Cu, 25.0 Zn, 10.0 Ni 65.0 Cu, 17.0 Zn, 18.0 Ni 65.0 Cu, 20.0 Zn, 15.0 Ni 65.0 Cu, 23.0 Zn, 12.0 Ni
F, W F, R, W F F, W
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p442–454, (1993).
©2001 CRC Press LLC
4.1 Composition L Page 134 Wednesday, December 31, 1969 17:00
Table 54. COMPOSITION OF
WROUGHT COPPERS AND COPPER ALLOYS * (SHEET 11 OF 11)
UNS Number and Name
Nominal Composition (%)
Commercial Forms(a)
C76200 C77000 Nickel silver, 55-18 C72200 C78200 Leaded nickel silver, 65-8-2
59.0 Cu, 29.0 Zn, 12.0 Ni 55.0 Cu, 27.0 Zn, 18.0 Ni 82.0 Cu, 16.0 Ni, 0.5 Cr, 0.8 Fe, 0.5 Mn 65.0 Cu, 2.0 Pb, 25.0 Zn, 8.0 Ni
F, T F, R, W F, T F
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p442–454, (1993). *
(a) F, flat products; R, rod; W, wire; T, tube; P, pipe; S, shapes. (b) C10400, 8 oz/ton Ag, C10500, 10 oz/ton C10700, 25 oz/ton . (c) C11300, 8 oz/ton Ag, C11400,10 oz/ton, C11500, 16 oz/ton C11600, 25 oz/ton (d) C12000, 0.008 P; C12100, 0.008 P and 4 oz/ton Ag; (e) C12700, 8 oz/ton Ag; C12800,10 oz/ton; C12900,16 oz/ton; C13000, 25 oz/ton. (f) 8.30 oz/ton Ag. (g) C18200, 0.9 Cr, C18400, 0.9 Cr; C18500, 0.7 Cr (h) Rod, 61.0 Cu min.
©2001 CRC Press LLC
4.1 Composition L Page 135 Wednesday, December 31, 1969 17:00
Table 55. CLASSIFICATION OF
COPPER AND COPPER ALLOYS
Family
Wrought Alloys UNS Numbers
Principal Alloying Element
Coppers, high copper alloys Brasses Phosphor bronzes Aluminum bronzes
C10000 C20000, C30000, C40000, C66400 to C69800 C50000 C60600 to C64200
< 8 at % Zn Sn Al
Silicon bronzes Copper nickels, nickel silvers
C64700 to C66100 C70000
Si Ni
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p439, (1993).
©2001 CRC Press LLC
4.1 Composition L Page 136 Wednesday, December 31, 1969 17:00
Table 56. COMPOSITION
RANGES FOR CAST ALUMINUM ALLOYS (SHEET 1 OF 3) Composition, (%)
AA Number
Cu
Mg
Mn
Si
Others
201.0 206.0 A206.0 208.0
4.6 4.6 4.6 4.0
0.35 0.25 0.25 —
0.35 0.35 0.35 —
— 0.10 (max) 0.05 (max) 3.0
0.7 Ag, 0.25 Ti 0.22 Ti, 0.15 Fe (max) 0.22 Ti, 0.10 Fe (max) —
242.0 295.0 296.0 308.0
4.0 4.5 4.5 4.5
1.5 — — —
— — — —
0.8 2.5 5.5
319.0 336.0 354.0 355.0
3.5 1.0 1.8 1.2
— 1.0 0.50 0.50
—
C355.0 356.0
1.2 0.25 (max)
0.50 0.32
2.0 Ni — —
— 0.50 (max)
6.0 12.0 9.0 5.0
— 2.5 Ni — 0.6 Fe (max), 0.35 Zn (max)
0.10 (max) 0.35 (max)
5.0 7.0
0.20 Fe (max), 0.10 Zn (max) 0.6 Fe (max), 0.35 Zn (max)
Source: Data from ASM Metals Reference Book, Second Edition, American Society for Metals, Metals Park, Ohio 44073, p.303 (1984).
©2001 CRC Press LLC
4.1 Composition L Page 137 Wednesday, December 31, 1969 17:00
Table 56. COMPOSITION
RANGES FOR CAST ALUMINUM ALLOYS (SHEET 2 OF 3) Composition, (%)
AA Number
Cu
Mg
Mn
Si
Others
A356.0 357.0
0.20 (max) —
0.35 0.50
0.10 (max) —
7.0 7.0
0.20 Fe (max), 0.10 Zn (max) —
A357.0 359.0 360.0 A360.0
— — — —
0.6 0.6 0.50 0.50
— — —
7.0 9.0 9.5 9.5
0.15 Ti, 0.005 Be — 2.0 Fe (max) 1.3 Fe (max)
380.0 A380.0 383.0 384.0
3.5 3.5 2.5 3.8
— — —
— — — —
8.5 8.5 10.5 11.2
2.0 Fe (max) 1.3 Fe (max) — 3.0 Zn (max)
A384.0 390.0 A390.0 413.0
3.8 4.5 4.5 —
— 0.6 0.6 —
— — — —
11.2 17.0 17.0 12.0
1.0 Zn (max) 1.3 Zn (max) 0.5 Zn (max) 2.0 Fe (max)
Source: Data from ASM Metals Reference Book, Second Edition, American Society for Metals, Metals Park, Ohio 44073, p.303 (1984).
©2001 CRC Press LLC
4.1 Composition L Page 138 Wednesday, December 31, 1969 17:00
Table 56. COMPOSITION
RANGES FOR CAST ALUMINUM ALLOYS (SHEET 3 OF 3) Composition, (%)
AA Number
Cu
Mg
Mn
Si
Others
A413.0 4430 A443.0 B443.0
0.6 (max) 0.30 (max) 0.15 (max)
— — — —
— — — —
12.0 5.2 5.2 5.2
1.3 Fe (max) — — —
C443.0 514.0 518.0 520.0
0.6 (max) — — —
— 4.0 8.0 10.0
— — — —
5.2 —
2.0 Fe (max) —
—
—
535.0 A535.0 B535.0 712.0
— — —
6.8 7.0 7.0 0.6
0.18 0.18 — —
— — — —
0.18 Ti — 0.18 Ti 5.8 Zn, 0.5 Cr, 0.20 Ti
713.0 771.0 850.0
0.7 — 1.0
0.35 0.9 —
— — —
— — —
7.5 Zn, 0.7 Cu 7.0 Zn, 0.13 Cr, 0.15 Ti 6.2 Sn, 1.0 Ni
Source: Data from ASM Metals Reference Book, Second Edition, American Society for Metals, Metals Park, Ohio 44073, p.303 (1984).
©2001 CRC Press LLC
4.1 Composition L Page 139 Wednesday, December 31, 1969 17:00
Table 57. COMPOSITION
RANGES FOR WROUGHT ALUMINUM ALLOYS (SHEET 1 OF 3)
AA
Composition (%)
Number
Al
Si
Cu
Mn
Mg
Cr
Zn
Other
1060 1100 2011 2014
99.60 min 99.00 min 93.7 93.5
— — — 0.8
— 0.12 5.5 4.4
— — — 0.8
— — — 0.5
— — — —
— — — —
— — 0.4Bi; 0.4Pb —
2024 2219 2319 2618
93.5 93.0 93.0 93.7
— — — 0.18
4.4 6.3 6.3 2.3
0.6 0.3 0.3 —
1.5 — — 1.6
— — — —
— — — —
— 0.06Ti; 0.10V; 0.18Zr 0.18Zn, 0.15Ti; 0.10V 1.1Fe; 1.0Ni; 0.07Ti
3003 3004 3105
98.6 97.8 99.0
— —
— — —
0.12 1.2 0.55
1.2 1.0 0.50
— — —
— — —
— — —
4032 4043
85.0 94.8
12.2 5.2
0.9 —
—
1.0 —
— —
— —
0.9Ni —
Source: Data from ASM Metals Reference Book, Second Edition, American Society for Metals, Metals Park, Ohio 44073, p.292, (1984).
©2001 CRC Press LLC
4.1 Composition L Page 140 Wednesday, December 31, 1969 17:00
Table 57. COMPOSITION
RANGES FOR WROUGHT ALUMINUM ALLOYS (SHEET 2 OF 3)
AA
Composition (%)
Number
Al
Si
Cu
Mn
Mg
Cr
Zn
Other
5005 5050 5052 5056
99.2 98.6 97.2 95.0
— — — —
— — — —
— — — 0.12
0.8 1.4 2.5 5.0
— — 0.25 0.12
— — — —
— — — —
5083 5086 5154 5182
94.7 95.4 96.2 95.2
— — — —
— — — —
0.7 0.4 — 0.35
4.4 4.0 3.5 4.5
0.15 0.15 0.25 —
— — — —
— — — —
5252 5254 5356 5454
97.5 96.2 94.6 96.3
— — —
— — — —
— — 0.12 0.8
2.5 3.5 5.0 2.7
— 0.25 0.12 0.12
— — — —
— — 0.13Ti —
5456 5457 5652 5657
93.9 98.7 97.2 99.2
— — — —
— — — —
0.8 0.3 — —
5.1 1.0 2.5 0.8
0.12 — 0.25 —
— — — —
— — — —
Source: Data from ASM Metals Reference Book, Second Edition, American Society for Metals, Metals Park, Ohio 44073, p.292, (1984).
©2001 CRC Press LLC
4.1 Composition L Page 141 Wednesday, December 31, 1969 17:00
Table 57. COMPOSITION
RANGES FOR WROUGHT ALUMINUM ALLOYS (SHEET 3 OF 3)
AA
Composition (%)
Number
Al
Si
Cu
Mn
Mg
Cr
Zn
Other
6005 6009 6010 6061
98.7 97.7 97.3 97.9
0.8 0.8 1.0 0.6
— 0.35 0.35 0.28
— 0.5 0.5 —
0.5 0.6 0.8 1.0
— — — 0.2
— — — —
— — — —
6063 6066 6070 6101
98.9 95.7 96.8 98.9
0.4 1.4 1.4 0.5
— 1.0 0.28 —
— 0.8 0.7 —
0.7 1.1 0.8 0.6
— — — —
— — — —
— — — —
6151 6201 6205
98.2 98.5 98.4
0.9 0.7 0.8
— — —
— — 0.1
0.6 0.8 0.5
0.25 — 0.1
— — —
— — 0.1Zr
7049 7075
88.2 90.0
— —
1.5 1.6
— —
2.5 2.5
0.15 0.23
7.6 5.6
— —
Source: Data from ASM Metals Reference Book, Second Edition, American Society for Metals, Metals Park, Ohio 44073, p.292, (1984).
©2001 CRC Press LLC
4.1 Composition L Page 142 Wednesday, December 31, 1969 17:00
Table 58. COMPOSITION OF
TIN AND TIN ALLOYS
Grade
Composition (% max)
ASTM B339
Designation
Class
Sn
Sb
As
Bi
Cd
Cu
Fe
Pb
Ni + Co
S
Zn
AAA
Electrolytic
Extra-high purity
99.98
0.008
0.0005
0.001
0.001
0.002
0.005
0.010
0.005
0.002
0.001
AA
Electrolytic
High purity
99.95
0.02
0.01
0.01
0.01
0.02
0.01
0.02
0.01
0.01
0.005
A
A. Straits
High purity; commercial
99.80
0.04
0.05
0.015
0.001
0.04
0.015
0.05
0.01
0.01
0.005
B
B
General purpose
99.80
—
0.05
—
—
—
—
—
—
—
—
C
C
Intermediate grade
99.65
—
—
—
—
—
—
—
—
—
—
D
D
Lower intermediate grade
99.50
—
—
—
—
—
—
—
—
—
—
E
E
Common
99.00
—
—
—
—
—
—
—
—
—
—
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p488, (1993).
©2001 CRC Press LLC
4.1 Composition L Page 143 Wednesday, December 31, 1969 17:00
Table 59. COMPOSITIONS OF
ACI HEAT-RESISTANT CASTING ALLOYS (SHEET 1 OF 2) Composition (%) †
ACI Designation
UNS Number
HC HD HE HF
J92605 J93005 J93403 J92603
HH HI HK HL HN HP HT HU
ASTM specification
*
C
Cr
Ni
Si (max)
Mn
P&S
Mb
A297, A608 A297, A608 A297, A608 A297, A608
0.50 max 0.50 max 0.20 to 0.50 0.20 to 0.40
26 to 30 26 to 30 26 to 30 19 to 23
4 max 4 to 7 8 to 11 9 to 12
2.00 2.00 2.00 2.00
1 1.5 2 2
0.04 max 0.04 max 0.04 max 0.04 max
0.5 max 0.5 max 0.5 max 0.5 max
J93503 J94003 J94224 J94604
A297, A608 A297, A567, A608 A297, A351, A567, A608 A297, A608
0.20 to 0.50 0.20 to 0.50 0.20 to 0.60 0.20 to 0.60
24 to 28 26 to 30 24 to 28 28 to 32
11 to 14 14 to 18 18 to 22 18 to 22
2.00 2.00 2.00 2.00
2 2 2 2
0.04 max 0.04 max 0.04 max 0.04 max
0.5 max 0.5 max 0.5 max 0.5 max
J94213 — J94605 —
A297, A608 A297 A297,A351,A567,A608 A297, A608
0.20 to 0.50 0.35 to 0.75 0.35 to 0.75 0.35 to 0.75
19 to 32 24 to 28 13 to17 17 to 21
23 to 27 33 to 37 33 to37 37 to 41
2.00 2.00 2.50 2.50
2 2 2 2
0.04 max 0.04 max 0.04 max 0.04 max
0.5 max 0.5 max 0.5 max 0.5 max
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p384, (1993).
©2001 CRC Press LLC
Other
0.2 N max
4.1 Composition L Page 144 Wednesday, December 31, 1969 17:00
Table 59. COMPOSITIONS OF
ACI HEAT-RESISTANT CASTING ALLOYS (SHEET 2 OF 2) Composition (%) †
ACI Designation
UNS Number
HW HX
— —
ASTM specification A297, A608 A297, A608
*
C
Cr
Ni
Si (max)
Mn
P&S
Mb
0.35 to 0.75 0.35 to 0.75
10 to 14 15 to 19
58 to 62 64 to 68
2.50 2.50
2 2
0.04 max 0.04 max
0.5 max 0.5 max
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p384, (1993). *
ASTM designations are same as ACI designations.
†
Rem Fe in all compositions.
©2001 CRC Press LLC
Other
4.1 Composition L Page 145 Wednesday, December 31, 1969 17:00
Table 60. COMPOSITION OF
ZINC DIE CASTING ALLOYS Composition (% max)
Alloy
Form
Cu
Al
Mg
Pb
Cd
Sn
Fe
Others
Zn
AG40A AC41A Alloy 7
Ingot Die castings Ingot
0.10 0.25 to 0.75 0.75 to 1.25
3.9 to 4.3 3.5 to 4.3 3.9 to 4.3
0.025 to 0.05 0.020 to 0.05(a) 0.03 to 0.06
0.004 0.005 0.004
0.003 0.004 0.003
0.002 0.003 0.002
0.075 0.100 0.075
Ni 0.02, Cr 0.02, Si 0.035, Mn 0.5 Ni 0.02, Cr 0.02, Si 0.035, Mn 0.5 Ni 0.02, Cr 0.02, Si 0.035, Mn 0.5
rem rem rem
ILZRO 16
Die castings Die castings
0.75 to 1.25 0.25
3.5 to 4.3 3.5 to 4.3
0.03 to 0.08(a) 0.010 to 0.02
0.005 0.0020
0.004 0.0020
0.003 0.0010
0.100 0.050
rem rem
Die castings
1.0 to 1.5
0.01 to 0.04
—
—
—
—
Ni 0.02, Cr 0.02, Si 0.035, Mn 0.5 — Ti 0.15–0.25, Cr 0.10–0.20, Ti + Cr 0.30–0.40
(a) Magnesium content may be as low as 0.015% provided that lead, cadmium and tin contents do not exceed 0.003. 0.003 and 0.001%, respectively. Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p490, (1993).
©2001 CRC Press LLC
rem
4.1 Composition L Page 146 Wednesday, December 31, 1969 17:00
Table 61. COMPOSITIONS OF WROUGHT (SHEET 1 OF 2)
SUPERALLOYS
Composition (%) Alloy
UNS number
Cr
Ni
Co
Mo
W
Nb
Ti
Al
Fe
C
Other
Astroloy D–979 IN 102 Inconel 706
— N09979 N06102 N09706
15.0 15.0 15.0 16.0
56.5 45.0 67.0 41.5
15.0 — — —
5.25 4.0 2.9 —
— 4.0 3.0 —
— — 2.9 —
3.5 3.0 0.5 1.75
4.4 1.0 0.5 0.2
<0.3 27.0 7.0 37.5
0.06 0.05 0.06 0.03
0.03 B; 0.06 Zr 0.01 B 0.005 B; 0.02 Mg; 0.03 Zr 2.9(Nb+Ta); 0.15 Cu max
Inconel 718 Inconel 751 Inconel X750 M252
N07718 — N07750 N07252
19.0 15.5 15.5 19.0
52.5 72.5 73.0 56.5
— — — 10.0
3.0 — — 10.0
— — — —
5.1 1.0 1.0 —
0.9 2.3 2.5 2.6
0.5 1.2 0.7 1.0
18.5 7.0 7.0 <0.75
0.08 max 0.05 0.04 0.15
0.15 Cu max 0.25 Cu max 0.25 Cu max 0.005 B
Nimonic 80A Nimonic 90 Nimonic 95 Nimonic 100
N07080 N07090 — —
19.5 19.5 19.5 11.0
73.0 55.5 53.5 56.0
1.0 18.0 18.0 20.0
— — — 5.0
— — — —
— — — —
2.25 2.4 2.9 1.5
1.4 1.4 2.0 5.0
1.5 1.5 5.0 max 2.0 max
0.05 0.06 0.15 max 0.30 max
0.10 Cu max — +B; +Zr +B; +Zr
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p382-383, (1993).
©2001 CRC Press LLC
4.1 Composition L Page 147 Wednesday, December 31, 1969 17:00
Table 61. COMPOSITIONS OF WROUGHT (SHEET 2 OF 2)
SUPERALLOYS
Composition (%) Alloy
UNS number
Cr
Ni
Co
Mo
W
Nb
Ti
Al
Fe
C
Other
Nimonic 105 Nimonic 115 Nimonic 263 Pyromet 860
— — — —
15.0 15.0 20.0 13.0
54.0 55.0 51.0 44.0
20.0 15.0 20.0 4.0
5.0 4.0 5.9 6.0
— — — —
— — — —
1.2 4.0 2.1 3.0
4.7 5.0 0.45 1.0
— 1.0 0.7 max 28.9
0.08 0.20 0.06 0.05
0.005 B 0.04 Zr — 0.01 B
René 41 René 95 Udimet 500 Udimet 520
N07041 — N07500 —
19.0 14.0 19.0 19.0
55.0 61.0 48.0 57.0
11.0 8.0 19.0 12.0
10.0 3.5 4.0 6.0
— 3.5 — 1.0
— 3.5 — —
3.1 2.5 3.0 3.0
1.5 3.5 3.0 2.0
<0.3 <0.3 4.0 max —
0.09 0.16 0.08 0.08
0.01 B 0.01 B; 0.05 Zr 0.005 B 0.005 B
Udimet 700 Udimet 710 Unitemp AF2–1DA Waspaloy
— — — N07001
15.09 18.0 12.0 19.5
53.0 55.0 59.0 57.0
18.5 14.8 10.0 13.5
5.0 3.0 3.0 4.3
— 1.5 6.0 —
— — — —
3.4 5.0 3.0 3.0
4.3 2.5 4.6 1.4
<1.0 — <0.5 2.0 max
0.07 0.07 0.35 0.07
0.03 B 0.01 B 1.5 Ta; 0.015 B; 0.1 Zr 0.006 B; 0.09 Zr
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p382-383, (1993).
©2001 CRC Press LLC
4.1 Composition L Page 148 Wednesday, December 31, 1969 17:00
Table 62. TYPICAL
COMPOSITION OF GLASS -CERAMICS Typical composition (wt %)
Glass–Ceramic
SiO2
Li2O
Al2O3
MgO
Li2O-Al2O3-SiO2 system MgO-Al2O3-SiO2 system Li2O-MgO-SiO2 system Li2O-ZnO-SiO2 system
74 65 73 58
4 — 11 23
16 19 — —
— 9 7 —
ZnO
B 2 O3
(nucleating agent)
P 2 O5 (nucleating agent)
— — — 16
— — 6 —
6 7 — —
— — 3 3
TiO2
Source: data compiled by J.S. Park from P.C. McMillan, Glass-Ceramics, 2nd edition, Academic Press, (1979).
©2001 CRC Press LLC
Shackelford, James F. & Alexander, W. “Phase Diagram Sources” Materials Science and Engineering Handbook Ed. James F. Shackelford & W. Alexander Boca Raton: CRC Press LLC, 2001
5.0 Phase Diagrams Page 149 Wednesday, December 31, 1969 17:00
CHAPTER 3
Phase Diagram Sources
List of Tables
Phase Diagram Sources
©2001 CRC Press LLC
149
5.1 Phase Diagrams Page 150 Wednesday, December 31, 1969 17:00
Phase Diagram Sources
Phase Diagrams are especially useful tools for the field of materials science and engineering. In the last decade, a substantial effort has been made within the materials community to provide a comprehensive set of accurate phase equilibria information. Cooperative efforts involving academia, industry, and government have been coordinated through the professional societies, ASM International and the American Ceramic Society. As a result, the following references are available and new updates will become available on a regular basis.
Table 63. PHASE Society
DIAGRAM SOURCES Source
American Ceramic Society
Phase Diagrams for Ceramists, Vols. 1-12, American Ceramic Society, Westerville, Ohio, 1964, 1969, 1975, 1981, 1983, 1987, 1989, 1989, 1992, 1994, 1995, and 1996.
ASM International
Binary Alloy Phase Diagrams, Second Edition, Vols. 1, 2 and 3, T.B. Massalski, et.al., ed., ASM International, Materials Park, Ohio, 1990.
ASM International
ASM Handbook, Vol. 3, ASM International, Materials Park, Ohio, 1992.
©2001 CRC Press LLC
150
CRC Handbook of Materials Science & Engineering
Shackelford, James F. & Alexander, W. “Thermodynamic and Kinetic Data” Materials Science and Engineering Handbook Ed. James F. Shackelford & W. Alexander Boca Raton: CRC Press LLC, 2001
6.0 Thermodynamics Page 151 Wednesday, December 31, 1969 17:00
CHAPTER 4
List of Tables
Thermodynamic and Kinetic Data
Bond Strengths Bond Strengths in Diatomic Molecules Bond Strengths of Polyatomic Molecules Solubility of Copper and Copper Alloys Heat of Formation of Inorganic Oxides Phase Change Phase Change Thermodynamic Properties for The Elements Phase Change Thermodynamic Properties of Oxides Melting Point Melting Points of the Elements Melting Points of Elements and Inorganic Compounds Melting Points Of Ceramics Heat of Fusion & Sublimation Heat of Fusion For Elements and Inorganic Compounds Heats of Sublimation of Metals and Their Oxides Thermodynamic Coefficients Key to Tables of Thermodynamic Coefficients Thermodynamic Coefficients for Selected Elements Thermodynamic Coefficients for Oxides Entropy Entropy of the Elements
©2001 CRC Press LLC
151
6.0 Thermodynamics Page 152 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data List of Tables (Continued)
Vapor Pressure Vapor Pressure of the Elements at Very Low Pressures Vapor Pressure of the Elements at Moderate Pressures Vapor Pressure of the Elements at High Pressures Vapor Pressure of Elements and Inorganic Compounds Diffusion Values of The Error Function Diffusion in Metallic Systems Diffusion of Metals into Metals Diffusion in Semiconductors
©2001 CRC Press LLC
152
CRC Handbook of Materials Science & Engineering
6.1 Thermodynamics Page 153 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 64. BOND
STRENGTHS IN DIATOMIC MOLECULES * (SHEET 1 OF 18) kcal • mol-1
Molecule H–H H–D D–D H–Li
104.207 105.030 106.010 56.91
± 0.001 ± 0.001 ± 0.001 ± 0.01
H–Be H–B H–C H–N
54 79 80.9 75
H–O H–F H–Na H–Mg
102.34 135.9 48 47
± 0.30 ± 0.3 ±5 ± 12
H–Al H–Si H–P H–S
68 71.4 82 82.3
±2 ± 1.2 ±7 ± 2.9
H–Cl H–K H–Ca H–Cr
103.1 43.8 40.1 67
H–Mn H–Ni H –Cu H–Zn
56 61 67 20.5
±7 ±7 ±2 ± 0.5
H –Ga H–Ge H–As H–Se
68 76.8 65 73
±5 ± 0.2 ±3 ±1
±1 ±4
± 3.5 ± 12
To convert kcal to KJ, multiply by 4.184. Source: data from: Kerr, J. A., Parsonage, M. J., and Trotman–Dickenson, A. F., in Handbook of Chemistry and Physics, 55th ed., Weast, R. C., Ed., CRC Press, Cleveland, 1974, F–204.
©2001 CRC Press LLC
Shackelford & Alexander
153
6.1 Thermodynamics Page 154 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 64. BOND
STRENGTHS IN DIATOMIC MOLECULES * (SHEET 2 OF 18) kcal • mol-1
Molecule H–Br H–Rb H–Sr H–Ag
87.4 40 39 59
± 0.5 ±5 ±2 ±1
H–Cd H–In H–Sn H–Te
16.5 59 63 64
± 0.1 ±2 ±1 ±1
H–I H–Cs H–Ba H–Yb
71.4 42.6 42 38
± 0.2 ± 0.9 ±4 ±1
H–Pt H–Au H–Hg H–Ti
84 75 9.5 45
±9 ±3
H–Pb H–Bi Li–Li Li–O
42 59 24.55 78
±5 ±7 ± 0.14 ±6
Li– F Li–Cl Li–Br Li–I
137.5 111.9 100.2 84.6
±1 ±2 ±2 ±2
Be–Be Be–0 Be–F Be–S
17 98 136 89
±7 ±2 ± 14
±2
To convert kcal to KJ, multiply by 4.184. Source: data from: Kerr, J. A., Parsonage, M. J., and Trotman–Dickenson, A. F., in Handbook of Chemistry and Physics, 55th ed., Weast, R. C., Ed., CRC Press, Cleveland, 1974, F–204.
©2001 CRC Press LLC
154
CRC Handbook of Materials Science & Engineering
6.1 Thermodynamics Page 155 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 64. BOND
STRENGTHS IN DIATOMIC MOLECULES * (SHEET 3 OF 18) kcal • mol-1
Molecule Be–Cl Be–Au B–B B–N
92.8 ~ 67 ~ 67 93
± 2.2
B–0 B–F B–S B–Cl
192.7 180 138.8 119
± 1.2 ±3 ± 2.2
B–Se B–Br B–Ru B–Rh
110 101 107 114
±4 ±5 ±5 ±5
B–Pd B–Te B–Ce B–Ir
79 85 ~ 100 123
±5 ±5
B–Pt B–Au B–Th C–C
114 82 71 144
±4 ±4 ±5
C–N C–0 C–F C–Si
184 257.26 128 104
±1 ± 0.77 ±5 ±5
C–P C–S C–Cl C–Ti
139 175 93 ~128
± 23 ±7
±5 ± 12
±4
To convert kcal to KJ, multiply by 4.184. Source: data from: Kerr, J. A., Parsonage, M. J., and Trotman–Dickenson, A. F., in Handbook of Chemistry and Physics, 55th ed., Weast, R. C., Ed., CRC Press, Cleveland, 1974, F–204.
©2001 CRC Press LLC Shackelford & Alexander
155
6.1 Thermodynamics Page 156 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 64. BOND
STRENGTHS IN DIATOMIC MOLECULES * (SHEET 4 OF 18) kcal • mol-1
Molecule C–V C–Ge C–Se C–Br
133 110 139 67
±5 ± 23 ±5
C–Ru C–Rh C–I C–Ce
152 139 50 109
±3 ±2 ±5 ±7
C–Ir C–Pt C–U N–N
149 146 111 226.8
±3 ±2 ±7 ± 1.5
N–O N–F N–Al N–Si
150.8 62.6 71 105
± 0.2 ± 0.8 ± 23 ±9
N–P N–S N–Cl N–Ti
148 ~ 120 93 111
±5 ±6 ± 12
N–As N–Se N–Br N–Sb
116 105 67 72
± 23 ± 23 ±5 ± 12
N–I N–Xe N–Th N–U
~.38 55 138 127
±1 ±1
To convert kcal to KJ, multiply by 4.184. Source: data from: Kerr, J. A., Parsonage, M. J., and Trotman–Dickenson, A. F., in Handbook of Chemistry and Physics, 55th ed., Weast, R. C., Ed., CRC Press, Cleveland, 1974, F–204.
©2001 CRC Press LLC
156
CRC Handbook of Materials Science & Engineering
6.1 Thermodynamics Page 157 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 64. BOND
STRENGTHS IN DIATOMIC MOLECULES * (SHEET 5 OF 18) kcal • mol-1
Molecule O–O O–F O–Na O–Mg
118.86 56 61 79
± 0.04 ±9 ±4 ±7
O–Al O–Si
116 184
±5 ±3
O–P O–S
119.6 124.69
±3 ± 0.03
O–Cl O–K O–Ca O–Sc
64.29 57 84 155
± 0.03 ±8 ±7 ±5
O–Ti O–V O–Cr O–Mn
158 154 110 96
±8 ±5 ± 10 ±8
O–Fe O–Co O–Ni O–Cu
96 88 89 82
±5 ±5 ±5 ± 15
O–Zn O–Ga O–Ge O–As
≤ 66 68 158.2 115
± 15 ±3 ±3
O–Se O–Br O–Rb O–Sr
101 56.2 (61) 93
± 0.6 ± 20 ±6
To convert kcal to KJ, multiply by 4.184. Source: data from: Kerr, J. A., Parsonage, M. J., and Trotman–Dickenson, A. F., in Handbook of Chemistry and Physics, 55th ed., Weast, R. C., Ed., CRC Press, Cleveland, 1974, F–204.
©2001 CRC Press LLC Shackelford & Alexander
157
6.1 Thermodynamics Page 158 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 64. BOND
STRENGTHS IN DIATOMIC MOLECULES * (SHEET 6 OF 18) kcal • mol-1
Molecule O–Y O–Zr O–Nb O–Mo
162 181 189 115
±5 ± 10 ± 10 ± 12
O–Ru O–Rh O–Pd O–Ag
115 90 56 51
± 15 ± 15 ±7 ± 20
O–Cd O–In O–Sn O–Sb
≤ 67 ≤ 77 127 89
±2 ± 20
O–Fe O–I O–Xe O–Cs
93.4 47 9 67
±2 ±7 ±5 ±8
O–Ba O–La O–Ce O–Pr
131 188 188 183.7
±6 ±5 ±6
O–Nd O–Sm O–Eu O–Gd
168 134 130 162
±8 ±8 ± 10 ±6
O–Tb O–Dy O–Ho O–Er
165 146 149 147
±8 ± 10 ± 10 ± 10
To convert kcal to KJ, multiply by 4.184. Source: data from: Kerr, J. A., Parsonage, M. J., and Trotman–Dickenson, A. F., in Handbook of Chemistry and Physics, 55th ed., Weast, R. C., Ed., CRC Press, Cleveland, 1974, F–204.
©2001 CRC Press LLC
158
CRC Handbook of Materials Science & Engineering
6.1 Thermodynamics Page 159 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 64. BOND
STRENGTHS IN DIATOMIC MOLECULES * (SHEET 7 OF 18) kcal • mol-1
Molecule O–Tm O–Yb O–Lu O–Hf
122 98 159 185
± 15 ± 15 ±8 ± 10
O–Ta O–W O–Os O–Ir
183 156 < 142 ≤ 94
± 15 ±6
O–Pt O–Pb O–Bi O–Th
83 90.3 81.9 192
±8 ± 1.0 ± 1.5 ± 10
O–U O–Np O–Pu O–Cm
182 172 163 ≤ 134
±8 ±7 ± 15
F–F F–Na F–Mg F–Al
37.5 114 110 159:
± 2.3 ±1 ±1 ±3
F–Si F–P F–Cl F–K
116 105 59.9 118.9
± 12 ± 23 ± 0.1 ± 0.6
F–Ca F–Sc F–Ti F–Cr
125 141 136 104.5
±5 ±3 ±8 ± 4.7
To convert kcal to KJ, multiply by 4.184. Source: data from: Kerr, J. A., Parsonage, M. J., and Trotman–Dickenson, A. F., in Handbook of Chemistry and Physics, 55th ed., Weast, R. C., Ed., CRC Press, Cleveland, 1974, F–204.
©2001 CRC Press LLC Shackelford & Alexander
159
6.1 Thermodynamics Page 160 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 64. BOND
STRENGTHS IN DIATOMIC MOLECULES * (SHEET 8 OF 18) kcal • mol-1
Molecule F–Mn F–Ni F–Cu F–Ga
101.2 89 88 138
± 3.5 ±4 ±9 ±4
F–Ge F–Br F–Rb F–Sr
116 55.9 116.1 129.5
±5
F–Y Mg–I Mg–Au Al–Al
144 ~.68 59 44
Al–P Al–S Al–Cl Al–Br
52 79 119.0 103.1
Al–I Al–Au Al–U Si–Si
88 65 78 76
±7 ±5
Si–S Si–Cl Si–Fe Si–Co
148 105 71 66
±3 ± 12 ±6 ±4
Si–Ni Si–Ge Si–Se Si–Br
76 72 127 82
±4 ±5 ±4 ± 12
±1 ± 1.6 ±5 ± 23
±3 ±1
To convert kcal to KJ, multiply by 4.184. Source: data from: Kerr, J. A., Parsonage, M. J., and Trotman–Dickenson, A. F., in Handbook of Chemistry and Physics, 55th ed., Weast, R. C., Ed., CRC Press, Cleveland, 1974, F–204.
©2001 CRC Press LLC
160
CRC Handbook of Materials Science & Engineering
6.1 Thermodynamics Page 161 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 64. BOND
STRENGTHS IN DIATOMIC MOLECULES * (SHEET 9 OF 18) kcal • mol-1
Molecule Si–Ru Si–Rh Si–Pd Si–Te
95 95 75 121
±5 ±5 ±4 ±9
Si–Ir Si–Pt Si–Au P–P
110 120 75 117
±5 ±5 ±3 ±3
F–Ag F–Cd F–In F–Sn
84.7 73 121 111.5
± 3.9 ±5 ±4 ±3
F–Sb F–I F–Xe F–Cs
105 67? 11 119.6
± 23
F–Ba F–Nd F–Sm F–Eu
140.3 130 126.9 126.1
± 1.6 ±3 ± 4.4 ± 4.4
F–Gd F–Hg F–Ti F–Pb
141. 31 106.4 85
± 46.5 ±9 ± 4.6 ±2
F–Bi F–Pu Na–Na Na–Cl
62 129 18.4 97.5
±1
±7 ± 0.5
To convert kcal to KJ, multiply by 4.184. Source: data from: Kerr, J. A., Parsonage, M. J., and Trotman–Dickenson, A. F., in Handbook of Chemistry and Physics, 55th ed., Weast, R. C., Ed., CRC Press, Cleveland, 1974, F–204.
©2001 CRC Press LLC Shackelford & Alexander
161
6.1 Thermodynamics Page 162 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 64. BOND
STRENGTHS IN DIATOMIC MOLECULES * (SHEET 10 OF 18) kcal • mol-1
Molecule Na–K Na–Br Na–Rb Na–I
15.2 86.7 14 72.7
± 0.7 ±1 ±1 ±1
Mg–Mg Mg–S Mg–Cl Mg–Br
8? 56? 76 75
±3 ± 23
P–S P–Ga P–W P–Th
70 56 73 90
S–S S–Ca S–Sc S–Mn
101.9 75 114 72
± 2.5 ±5 ±3 ±4
S–Fe S–Cu S–Zn S–Ge
78 72 49 131.7
± 12 ±3 ± 0.6
S–Se S–Sr S–Y S–Cd
91 75 127 48
±5 ±5 ±3
S–In S–Sn S–Te S–Ba
69 111 81 96
±4 ±1 ±5 ±5
±1
To convert kcal to KJ, multiply by 4.184. Source: data from: Kerr, J. A., Parsonage, M. J., and Trotman–Dickenson, A. F., in Handbook of Chemistry and Physics, 55th ed., Weast, R. C., Ed., CRC Press, Cleveland, 1974, F–204.
©2001 CRC Press LLC
162
CRC Handbook of Materials Science & Engineering
6.1 Thermodynamics Page 163 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 64. BOND
STRENGTHS IN DIATOMIC MOLECULES * (SHEET 11 OF 18) kcal • mol-1
Molecule S–La S–Ce S–Pr S– Nd
137 137 122.7 113
±3 ±3
S–Eu S–Gd S–Ho S–Lu
87 126 102 121
±4 ±4 ±4 ±4
S–Au S–Hg S–Pb S–Bi
100 51 82.7 75.4
±6 ± 0.4 ± 1.1
S–U Cl–Cl Cl–K Cl–Ca
135 58.066 101.3 95
±2 ± 0.001 ± 0.5 ±3
Cl–Sc Cl–Ti Cl–Cr Cl–Mn
79 26 87.5 86.2
± 2 ± 5.8 ± 2.3
Cl–Fe Cl–Ni Cl–Cu Cl–Zn
84? 89 84 54.7
±5 ±6 ± 4.7
Cl–Ga Cl–Ge Cl–Br Cl–Rb
114.5 82? 52.3 100.7
± 0.2 ±1
±4
To convert kcal to KJ, multiply by 4.184. Source: data from: Kerr, J. A., Parsonage, M. J., and Trotman–Dickenson, A. F., in Handbook of Chemistry and Physics, 55th ed., Weast, R. C., Ed., CRC Press, Cleveland, 1974, F–204.
©2001 CRC Press LLC Shackelford & Alexander
163
6.1 Thermodynamics Page 164 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 64. BOND
STRENGTHS IN DIATOMIC MOLECULES * (SHEET 12 OF 18) kcal • mol-1
Molecule Cl–Sr Cl–Y Cl–Ag Cl–Cd
97 82 75 49.9
±3 ± 23 ±9
Cl–In CI–Sn Cl–Sb Cl–I
103.3 75? 86 50.5
± 12 ± 0.1
Cl–Cs Cl–Ba Cl–Au Cl–Hg
106.2 106 82 24
± 1 ±3 ± 2 ± 2
Cl–Ti Cl–Pb Cl–Bi Cl–Ra
89.0 72 72 82
± 0.5 ±7 ±1 ± 18
Ar–Ar K–K K–Br K–I
0.2 12.8 90.9 76.8
± 0.5 ± 0.5
Ca–I Ca–Au Sc–Sc Ti–Ti
70 18 25.9 34
± 23
V–V Cr–Cr Cr –Cu Cr–Ge
58 <37 37 41
±5
±5 ±5
±5 ±7
To convert kcal to KJ, multiply by 4.184. Source: data from: Kerr, J. A., Parsonage, M. J., and Trotman–Dickenson, A. F., in Handbook of Chemistry and Physics, 55th ed., Weast, R. C., Ed., CRC Press, Cleveland, 1974, F–204.
©2001 CRC Press LLC
164
CRC Handbook of Materials Science & Engineering
6.1 Thermodynamics Page 165 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 64. BOND
STRENGTHS IN DIATOMIC MOLECULES * (SHEET 13 OF 18) kcal • mol-1
Molecule Cr–Br Cr–I Cr–Au Mn–Mn
78.4 68.6 51.3 4
±5 ± 5.8 ± 3.5 ±3
Mn–Se Mn–Br Mn–I Mn–Au
48 75.1 67.6 44
±3 ± 23 ± 2.3 ±3
Fe–Fe Fe–Ge Fe–Br Fe–Au
24 50 59 45
±5 ±7 ± 23 ±4
Co–Co Co–Cu Co–Ge Co–Au
40 39 57 51
±6 ±5 ±6 ±3
Ni–Ni Ni–Cu Ni–Ge Ni–Br
55.5 48 67.3 86
±5 ±5 ±4 ±3
Ni–I Ni–Au Cu–Cu Cu–Ge
70 59 46.6 49
±5 ±5 ± 2.2 ±5
Cu–Se Cu–Br Cu–Ag Cu–Sn
70 79 41.6 42.3
±9 ±65 ± 2.2 ±4
To convert kcal to KJ, multiply by 4.184. Source: data from: Kerr, J. A., Parsonage, M. J., and Trotman–Dickenson, A. F., in Handbook of Chemistry and Physics, 55th ed., Weast, R. C., Ed., CRC Press, Cleveland, 1974, F–204.
©2001 CRC Press LLC Shackelford & Alexander
165
6.1 Thermodynamics Page 166 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 64. BOND
STRENGTHS IN DIATOMIC MOLECULES * (SHEET 14 OF 18) kcal • mol-1
Molecule Cu–Te Cu–I Cu–Au Zn–Zn
42 47? 55.4 7
±9
Zn–Se Zn–Te Zn–I Ga–Ga
33 49? 33 3
±3
Ga–As Ga–Br Ga–Ag Ga–Te
50.1 101 4 60
± 0.3 ±4 ±3 ± 6
Ga–I Ga–Au Ge–Ge Ge–Se
81 51 65.8 114
±2 ± 23 ±3 ±
Ge–Br Ge–Te Ge–Au As–As
61 93 70 91.7
±7 ±2 ± 23
As–Se Se–Se Se–Cd Se–in
23 79.5 ~75 59
Se–Sn Se–Te Se–La Se–Nd
95.9 64 114 92
± 2.2
±7 ±3
± 0.1 ±4 ± 1.4 ±2 ±4 ±4
To convert kcal to KJ, multiply by 4.184. Source: data from: Kerr, J. A., Parsonage, M. J., and Trotman–Dickenson, A. F., in Handbook of Chemistry and Physics, 55th ed., Weast, R. C., Ed., CRC Press, Cleveland, 1974, F–204.
©2001 CRC Press LLC
166
CRC Handbook of Materials Science & Engineering
6.1 Thermodynamics Page 167 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 64. BOND
STRENGTHS IN DIATOMIC MOLECULES * (SHEET 15 OF 18) kcal • mol-1
Molecule Se–Eu Se–Gd Se–Ho Se–Lu
72 103 80 100
±4 ±4 ±4 ±4
Se–Pb Se–Bi Bi–Br Br–Rb
72.4 67.0 46.336 90.4
±1 ± 1.5 ± 0.001 ±1
Br–Ag Br–Cd Br–In Bi–Sn
70 ~38 93 47
±7
Br–Sb Br–I Br–Cs Br–Hg
75 42.8 96.5 17.3
± 14 ± 0.1 ±1
Br–Ti Br–Pb Br–Bi Rb–Rb
79.8 59 63.9 12.2
± 0.4 ±9 ±1
Rb–I Sr–Au Y–Y Y–La
76.7 63 38.3 48.3
±1 ± 23
Pd–Pd Pd–Au Ag–Ag Ag–Sn
33? 34.2 41 32.5
± 23
±5 ±2 ±5
To convert kcal to KJ, multiply by 4.184. Source: data from: Kerr, J. A., Parsonage, M. J., and Trotman–Dickenson, A. F., in Handbook of Chemistry and Physics, 55th ed., Weast, R. C., Ed., CRC Press, Cleveland, 1974, F–204.
©2001 CRC Press LLC
Shackelford & Alexander
167
6.1 Thermodynamics Page 168 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 64. BOND
STRENGTHS IN DIATOMIC MOLECULES * (SHEET 16 OF 18) kcal • mol-1
Molecule Ag–Te Ag–I Ag–Au Cd–Cd
70 56 48.5 2.7
± 23 ±7 ± 2.2 ± 0.2
Cd–I In–In In–Sb In–Te
33 23.3 36.3 52
±5 ± 2.5 ± 2.5 ±4
In–I Sn–Sn Sn–Te Sn–Au
80 46.7 76 58.4
±4 ±1 ±4
Sb–Sb Sb–Te Sb–Bi Te–Te
71.5 61 60 63.2
± 1.5 ±4 ±1 ± 0.2
Te–La Te–Nd Te–Eu Te–Gd
91 73 58 82
±4 ±4 ±4 ±4
Te–Ho Te–Lu Te–Au Te–Pb
62 78 59 60
±4 ±4 ± 16 ±3
Te–Bi I–I I–Cs I–Hg
56 36.460 82.4 9
±3 ± 0.002 ±1
To convert kcal to KJ, multiply by 4.184. Source: data from: Kerr, J. A., Parsonage, M. J., and Trotman–Dickenson, A. F., in Handbook of Chemistry and Physics, 55th ed., Weast, R. C., Ed., CRC Press, Cleveland, 1974, F–204.
©2001 CRC Press LLC
168
CRC Handbook of Materials Science & Engineering
6.1 Thermodynamics Page 169 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 64. BOND
STRENGTHS IN DIATOMIC MOLECULES * (SHEET 17 OF 18) kcal • mol-1
Molecule I–Ti I–Pb I–Bi Xe–Xe
65 47 52 ~ 0.7
±2 ±9 ±1
Cs–Cs Ba–Au La–Ld La–Au
11.3 38 58.6 80
Ce–Ce Ce–Au Pr–Au Nd–Au
66 76 74 70
±1 ±4 ±5 ±6
Au–Au Au–Pb Au–U Hg–Hg
52.4 31 76 4.1
± 2.2 ± 23 ±7 ± 0.5
Hg–Tl Tl–Tl Pb–Pb Pb–Bi
1 15? 24 32
±5 ±5
± 14 ±5
To convert kcal to KJ, multiply by 4.184. Source: data from: Kerr, J. A., Parsonage, M. J., and Trotman–Dickenson, A. F., in Handbook of Chemistry and Physics, 55th ed., Weast, R. C., Ed., CRC Press, Cleveland, 1974, F–204.
©2001 CRC Press LLC Shackelford & Alexander
169
6.1 Thermodynamics Page 170 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 64. BOND
STRENGTHS IN DIATOMIC MOLECULES * (SHEET 18 OF 18) kcal • mol-1
Molecule Bi–Bi Po–Po At–At Th–Th
45 44.4 19 <69
±2 ± 2.3
To convert kcal to KJ, multiply by 4.184. Source: data from: Kerr, J. A., Parsonage, M. J., and Trotman–Dickenson, A. F., in Handbook of Chemistry and Physics, 55th ed., Weast, R. C., Ed., CRC Press, Cleveland, 1974, F–204. *
Notes for Table of Bond Strengths in Diatomic Molecules The strength of a chemical bond, D (R–X), often known as the bond dissociation energy, is defined as the heat of the reaction: RX –> R + X. It is given by: D(R–X) = ∆Ηf˚(R) + ∆Hf˚(X) – ∆Hf˚(RX). Some authors list bond strengths for 0K, but here the values for 298K are given because more thermodynamic data are available for this temperature. Bond strengths, or bond dissociation energies, are not equal to, and may differ considerable from, mean bond energies derived solely from thermochemical data on molecules and atoms. The values in this table have usually been measured spectroscopically or by mass spectrometric analysis of hot gases effusing from a Knudsen cell.
©2001 CRC Press LLC
170
CRC Handbook of Materials Science & Engineering
6.1 Thermodynamics Page 171 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 65. BOND
STRENGTHS OF POLYATOMIC MOLECULES * (SHEET 1 OF 7) Kcal • mol -1
Molecule H–CH H–CH2 H–CH3 H–ethynyl
Value
Error
102
±2
110 104
±2 ±1
128
±5
H–vinyl H–C2H5 H–propargyl H–allyl
≥ 108
±2
98
±1
93.9 89
± 1.2 ±1
H–cyclopropyl H–n–C3H7
100.7
±1
98 95
±1 ±1
96.5
±1
97.4 83
± 1.6 ±1
95 92
±1 ± 1.2
81.2 80 119
± 1.2 ±1 ±1
103.6
±1
103.9 104.7 88 90
±1 ±1 ±5 ±2
H–i–C3H7 H–cyclobutyl H–cyclopropycarbinyl H–methdllyl H–s–C4H9 H–t–C4H9 H–cyclopentadien–1,3–yl–5 H–pentadien–1,4–yi–3 H–OH H–OCH3 H–OC2H5 H–OC(CH3)3 H–OC6H5 H–O2H To convert kcal to KJ, multiply by 4.184.
Source: data from: Kerr, J. A., Parsonage, M. J., and Trotman–Dickenson, A. F., in Handbook of Chemistry and Physics, 55th ed., Weast, R. C., Ed., CRC Press, Cleveland, 1974, F–213.
©2001 CRC Press LLC Shackelford & Alexander
171
6.1 Thermodynamics Page 172 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 65. BOND
STRENGTHS OF POLYATOMIC MOLECULES * (SHEET 2 OF 7) Kcal • mol -1
Molecule H–O2CCH3 H–O2CC2H3 H–O2Cn–C3H7 H–ONO H–ONO2 H–SH H–SCH H–SiH3 H–Si(CH3)3 BH3–BH3 HC=CH H2C=CH2 H3C–CH3 CH3–C(CH3)2CH:CH2 C6H5CH2–C2H5 C6H5CH(CH3)– CH3 C6H5CH2–n–C3H7 CH3–CH2CN CH3–C(CH3)2CN C6H5C(CH3 )(CN)–CH3 NC–CN C6H5CH2CO– CH2C6H5 C6H5CO– CF3 CH3CO– COCH3
Value
Error
112 110 103
±4 ±4 ±4
78.3
± 0.5
101.2
± 0.5
90 ≥ 88
±2
94
±3
90 35
±3
230
± 2
172
±2
88 69.4 69 71
±2
67 72.7 70.2 59.9
±2 ±2 ±2
128
±1
65.4 73.8 67.4
± 2.3
±2
To convert kcal to KJ, multiply by 4.184. Source: data from: Kerr, J. A., Parsonage, M. J., and Trotman–Dickenson, A. F., in Handbook of Chemistry and Physics, 55th ed., Weast, R. C., Ed., CRC Press, Cleveland, 1974, F–213.
©2001 CRC Press LLC
172
CRC Handbook of Materials Science & Engineering
6.1 Thermodynamics Page 173 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 65. BOND
STRENGTHS OF POLYATOMIC MOLECULES * (SHEET 3 OF 7) Kcal • mol -1
Molecule C6H5CH2– COOH C6H5CH2– O2CCH3 C6H5CO– COC6H5 C6H5CH2– O2CC6H5 (C6H5CH2)2CH–COOH CH2F–CH2F CF2=CF2 CF3–CF3 C6H5CH2–NH2 C6H5NH–CH3 C6H5CH2–NHCH3 C6H5N(CH2)–CH3 C6H5CH2–N(CH3)2 CF3–NF2 CH2 = N2 CH3N:N–CH3 C2H5N:N–C2H5 i –C3H7N:N–i –C3H7 n –C4H9N:N–n –C4H9 i –C4H9N:N–i –C4H9
Value
Error
68.1 67 66.4 69 59.4 88 76.3 96.9 71.9 67.7 68.7 65.2 60.9 65 ≤ 41.7 52.5
±2 ±3 ±2 ±1 ±1
±1 ± 2.5 ±1
50.0 47.5 50.0 49.0
To convert kcal to KJ, multiply by 4.184. Source: data from: Kerr, J. A., Parsonage, M. J., and Trotman–Dickenson, A. F., in Handbook of Chemistry and Physics, 55th ed., Weast, R. C., Ed., CRC Press, Cleveland, 1974, F–213.
©2001 CRC Press LLC Shackelford & Alexander
173
6.1 Thermodynamics Page 174 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 65. BOND
STRENGTHS OF POLYATOMIC MOLECULES * (SHEET 4 OF 7) Kcal • mol -1
Molecule s –C4H9N:N–s –C4H9 t –C4H9N:N–t –C4H9 C6H5CH2N:N–C6H5CH2 CF3N:N–CF3 C2H5–NO2 O=CO CH3–O2SCH3 Allyl–O2SCH3 C6H5CH2–O2SCH3 C6H5S–CH3 C6H5CH2–SCH3 F–CH3 Cl–CN Cl–COC6H5 Cl–CF3 Cl–CCl2F Cl–C2F5 Br–CH3 Br–CN Br–COC6H5 Br–CF3 Br–CBr3 Br–C2F5 Br –n –C3F
Value
Error
46.7 43.5 37.6 55.2 62 127.2
± 0.1
66.8 49.6 52.9 60 53.8 103
±3
97
±1
74 86.1 73
±3 ± 0.8 ±2
82.7 70.0
± 1.7 ± 1.2
83
±1
64.2 70.6 56.2 68.7 66.5
± 1.0 ± 1.8 ± 1.5 ± 2.5
To convert kcal to KJ, multiply by 4.184. Source: data from: Kerr, J. A., Parsonage, M. J., and Trotman–Dickenson, A. F., in Handbook of Chemistry and Physics, 55th ed., Weast, R. C., Ed., CRC Press, Cleveland, 1974, F–213.
©2001 CRC Press LLC
174
CRC Handbook of Materials Science & Engineering
6.1 Thermodynamics Page 175 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 65. BOND
STRENGTHS OF POLYATOMIC MOLECULES * (SHEET 5 OF 7) Kcal • mol -1
Molecule
Value
Error
I–CH3 1–norbornyl I–CN I–CF3
56.3
±1
62.5 73
± 2.5 ±1
53.5
±2
CH3–Ga(CH3)2
59.5 54.4 57.5 43.7
±1
47.1 40.7 68 36.4
± 0.6
CH3–CdCH3 CH3–HgCH3 C2H5–HgC2H5 n –C3H7–Hg n –C3H7 i –C3H7–Hg i –C3H7 C6H5–HgC6H5 CH3 –Tl(CH3)2 CH3–Pb(CH3)3 NH2–NH2 NH2–NHCH3 NH2 –N(CH3)2 NH2 –NHC6H5 NO–NO2 NO2–NO2 NF2–NF2 O–N2 O–NO HO–N:CHCH3 Cl–NF2
49.4 70.8 64.8 62.7 51.1 9.5 12.9 21
±1 ±2
± 0.5 ± 0.5 ±1
40 73
49.7 ≈ 32
To convert kcal to KJ, multiply by 4.184. Source: data from: Kerr, J. A., Parsonage, M. J., and Trotman–Dickenson, A. F., in Handbook of Chemistry and Physics, 55th ed., Weast, R. C., Ed., CRC Press, Cleveland, 1974, F–213.
©2001 CRC Press LLC Shackelford & Alexander
175
6.1 Thermodynamics Page 176 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 65. BOND
STRENGTHS OF POLYATOMIC MOLECULES * (SHEET 6 OF 7) Kcal • mol -1
Molecule HO–OH CH3O–OCH3 HO–OC(CH3)3 C2H5O–OC2H5 n –C3H7O–O n –C3H7 i –C3H7O–O i –C3H7 s –C4H9O–O s –C4H9 t –C4H9O–O t –C4H9 (CH3)3CCH2O–OCH2C(CH3)3 O–O2CIF CH3CO2–O2CCH3 C2H5CO2–O2CC2H5 n –C3H7CO2–O2Cn –C3H7 O–SO F–OCF3 Cl–OH O–ClO Br–OH I–OH ClO3–ClO4
Value
Error
51
±1
36.9 42.5 37.3
±1 ± 1.2
37.2 37.0 36.4 37.4
±1 ±1 ±1 ±1
36.4 58.4 30.4 30.4
±1
30.4
±2
±2 ±2
132
±2
43.5
± 0.5
60
±3
59 56 56
±3 ±3 ±3
58.4
To convert kcal to KJ, multiply by 4.184. Source: data from: Kerr, J. A., Parsonage, M. J., and Trotman–Dickenson, A. F., in Handbook of Chemistry and Physics, 55th ed., Weast, R. C., Ed., CRC Press, Cleveland, 1974, F–213.
©2001 CRC Press LLC
176
CRC Handbook of Materials Science & Engineering
6.1 Thermodynamics Page 177 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 65. BOND
STRENGTHS OF POLYATOMIC MOLECULES * (SHEET 7 OF 7) Kcal • mol -1
Molecule
Value
Error
SiH3–SiH3
130 122 119 81
±5 ±5 ±5 ±4
(CH3)3Si–Si(CH3)3
80.5
O = PF3 O = PCl3 O = PBr3
To convert kcal to KJ, multiply by 4.184. Source: data from: Kerr, J. A., Parsonage, M. J., and Trotman–Dickenson, A. F., in Handbook of Chemistry and Physics, 55th ed., Weast, R. C., Ed., CRC Press, Cleveland, 1974, F–213. *
The values refer to a temperature of 298 K and have mostly been determined by kinetic methods. Some have been calculated from formation of the species involved according to equations:
D(R–X) = ∆Hf˚ (R•) + ∆Hf˚(X•) – ∆Hf˚ (RX)
or
D(R–X) = 2∆Hf˚ (R•) – ∆Hf˚ (RR)
©2001 CRC Press LLC Shackelford & Alexander
177
6.2 Thermodynamics L Page 178 Wednesday, December 31, 1969 17:00
Table 66. SOLUBILITY OF
COPPER AND COPPER ALLOYS
Family
Wrought Alloys UNS Numbers
Principal Alloying Element
Solid Solubility at 20 °C (at. %)
Brasses Phosphor bronzes Aluminum bronzes
C20000, C30000, C40000, C66400 to C69800 C50000 C60600 to C64200
Zn Sn Al
37 9 19
Silicon bronzes Copper nickels, nickel silvers
C64700 to C66100 C70000
Si Ni
8 100
Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p439, (1993).
©2001 CRC Press LLC
6.2 Thermodynamics L Page 179 Wednesday, December 31, 1969 17:00
Table 67. HEAT OF
FORMATION OF INORGANIC OXIDES (SHEET 1 OF 16)
Reaction 2 Ac(c) + 3/2 O2(g) = Ac2O3(c) 2 Al(c) + 1/2 O2(g) = Al2O(g) 2 Al(l) + 1/2 O2(g) = Al2O(g) Al(c) + 1/2 O2(g) = AlO(g) Al(l) + 1/2 O2(g) = AlO(g) 2 Al(c) + 3/2 O2(g) = Al2O3 (corundum) 2 Al(l) + 3/2 O2(g) = Al2O3 (corundum) 2 Sb(c) + 3/2 O2(g) = Sb2O3 (cubic) 2 Sb(c) + 3/2 O2(g) = Sb2O3 (orthorhombic) 2 As(c) + 3/2 O2(g) = As2O3 (orthorhombic) 2 As(c) + 3/2 O2(g) = As2O3 (monoclinic) 2 As(c) + 5/2 O2(g) = As2O5(c)
Temperature range of validity
∆H0
2.303a
b
c
I
298.16–1,000K 298.16–931.7K 931.7–2,000K 298.16–931.7K
–446,090 –31,660 –38,670 +10,740
–16.12 +14.97 +10.36 +5.76
– – – –
– – – –
+109.89 –72.74 –51.53 –37.61
931.7–2,000K 298.16–931.7K 931.7–2,000K 298.16–842K
+8,170 –404,080 –407,950 –169,450
+5.76 –15.68 –6.19 +6.12
– +2.18 –0.78 –6.01
– +3.935 +3.935 –0.30
–34.85 +123.64 +102.37 +52.21
298.16–903K 298.16–542K 298.16–586K 298.16–883K
–168,060 –154,870 –150,760 –217,080
+6.12 +29.54 +29.54 +12.32
–6.01 –21.33 –21.33 –4.65
–0.30 –0.30 –0.30 –0.50
+50.56 –8.83 –16.95 +80.50
The ∆Ho values are given in gram calories per mole. The a, b, and I values listed here make it possible for one to calculate the ∆F and ∆S values by use of the following equations:
∆Ft = ∆Ηo + 2.303aT log T + b x 10–3 T2 + c x l05 T–1 + IT ∆St = – a – 2.303a log T – 2b x 10–3T + c x l05 T–2 – I
Source: data from CRC Handbook of Materials Science, Vol I, Charles T. Lynch, Ed., CRC Press, Cleveland, (1974).
©2001 CRC Press LLC
6.2 Thermodynamics L Page 180 Wednesday, December 31, 1969 17:00
Table 67. HEAT OF
FORMATION OF INORGANIC OXIDES (SHEET 2 OF 16)
Temperature range of validity
∆H0
2.303a
b
c
I
298.16–648K 648–977K 298.16–1,556K 298.16–544K
–134,590 –134,140 –144,220 –50,450
–7.60 –3.34 –1.91 –4.61
+0.87 –0.56 –0.46 –
+0.42 +0.42 +1.24 –
+45.76 +34.01 +30.64 +35.51
544–1,600K 298.16–544K 544–1,090K 298.16–723K
–52,920 –139,000 –142,270 –304,690
–4.61 –11.56 +2.30 +11.72
– +2.15 –3.25 –7.55
– –0.30 –0.30 +0.355
+40.05 +96.52 +67.55 +34.25
Ca(α) + 1/2 O2(g) = CaO(c)
298.16–723K 298.16–594K 594–1,038K 298.16–673K
–298,670 –62,330 –63,240 –151,850
+26.57 –2.05 +2.07 –6.56
–15.90 +0.71 –0.76 +1.46
–0.30 –0.10 –0.10 +0.68
–10.40 +29.17 +20.14 +43.93
Ca(β) + 1/2 O2(g) = CaO(c)
673–1,124K
–151,730
–4.14
+0.41
+0.68
+37.63
Reaction Ba(α) + 1/2 O2(g) = BaO(c) Ba(β) + 1/2 O2(g) = BaO(c) Be(c) + 1/2 O2(g) = BeO(c) Bi(c) + 1/2 O2(g) = BiO(c) Bi(l) + 1/2 O2(g) = BiO(c) 2 Bi(c) + 3/2 O2(g) = Bi2O3(c) 2 Bi(l) + 3/2 O2(g) = Bi2O3(c) 2 B(c) + 3/2 O2(g) = B2O(c) 2 B(c) + 3/2 O2(g) = B2O3(gl) Cd(c) + 1/2 O2(g) = CdO(c) Cd(l) + 1/2 O2(g) = CdO(c)
The ∆Ho values are given in gram calories per mole. The a, b, and I values listed here make it possible for one to calculate the ∆F and ∆S values by use of the following equations:
∆Ft = ∆Ηo + 2.303aT log T + b x 10–3 T2 + c x l05 T–1 + IT ∆St = – a – 2.303a log T – 2b x 10–3T + c x l05 T–2 – I
Source: data from CRC Handbook of Materials Science, Vol I, Charles T. Lynch, Ed., CRC Press, Cleveland, (1974).
©2001 CRC Press LLC
6.2 Thermodynamics L Page 181 Wednesday, December 31, 1969 17:00
Table 67. HEAT OF
FORMATION OF INORGANIC OXIDES (SHEET 3 OF 16)
Temperature range of validity
∆H0
2.303a
b
c
I
298.16–2,000K 298.16–2,000K 298.16–1,048K
–25,400 –93,690 –435,600
+2.05 +1.63 –4.60
+0.27 –0.7 –
–1.095 –0.23 –
–28.79 –5.64 +92.84
1,048–1,900K 298.16–1,048K 1,048–2,000K 298.16–301.5K
–440,400 –245,490 –247,930 –75,900
–4.60 –6.42 +0.71 –
– +2.34 –0.66 –
– –0.20 –0.20 –
+97.42 +67.79 +51.73 +36.60
2 Cs(c) + 3/2 O2(g) = Cs2O3(c)
301.5–763K 763–963K 963–1,500K 298.16–301.5K
–76,900 –75,370 –113,790 –112,690
– –9.21 –23.03 –11.51
– – – –
– – – –
+39.92 +64.47 +145.60 +110.10
2 Cs(l) + 3/2 O2(g) = Cs2O3(c)
301.5–775K
–113,840
–12.66
–
–
+116.77
Reaction C(graphite) + 1/2 O2(g) = CO(g) C(graphite) + O2(g) = CO2(g) 2 Ce(c) + 3/2 O2(g) = Ce2O3(c) 2 Ce(l) + 3/2 O2(g) = Ce2O3(c) Ce(c) + O2(g) = CeO2(c) Ce(l) + O2(g) = CeO2(c) 2 Cs(c) + 1/2 O2(g) = Cs2O(c) 2 Cs(l) + 1/2 O2(g) = Cs2O(c) 2 Cs(l) + 1/2 O2(g) = Cs2O(l) 2 Cs(g) + 1/2 O2(g) = Cs2O(l)
The ∆Ho values are given in gram calories per mole. The a, b, and I values listed here make it possible for one to calculate the ∆F and ∆S values by use of the following equations:
∆Ft = ∆Ηo + 2.303aT log T + b x 10–3 T2 + c x l05 T–1 + IT ∆St = – a – 2.303a log T – 2b x 10–3T + c x l05 T–2 – I
Source: data from CRC Handbook of Materials Science, Vol I, Charles T. Lynch, Ed., CRC Press, Cleveland, (1974).
©2001 CRC Press LLC
6.2 Thermodynamics L Page 182 Wednesday, December 31, 1969 17:00
Table 67. HEAT OF
FORMATION OF INORGANIC OXIDES (SHEET 4 OF 16)
Reaction 2 Cs(l) + 3/2 O2(g) = Cs2O3(l) 2 Cs(g) + 3/2 O2(g) = Cs2O3(l) Cl2(g) + 1/2 O2(g) = Cl2O(g) 1/2 Cl2(g) + 1/2 O2(g) = ClO(g) 2 Cl2(g) + 3/2 O2(g) = ClO(g) 2 Cr(c) + 3/2 O2(g) = Cr2O3(β) 2 Cr(l) + 3/2 O2(g) = Cr2O3(β) Cr(c) + O2(g) = CrO2 (c) Cr(c) + 3/2 O2(g) = CrO3(c) Cr(c) + 3/2 O2(g) = Cr2O3(l)
Co(α,β) + 1/2 O2(g) = CoO(c) Co(γ) + 1/2 O2(g) = CoO(c)
2 Cu(c) + 1/2 O2(g) = Cu2O(c) 2 Cu(l) + 1/2 O2(g) = Cu2O(c)
Temperature range of validity
∆H0
2.303a
b
c
I
775–963K 963–1,500K 298.16–2,000K
–110,740 –148,680 +17,770
–26.48 –39.14 –0.71
– – –0.12
– – +0.49
+152.70 +229.87 +16.81
298.16–1,000K 298.16–500K 298.16–1,823K 1,823–2,000K
+33,000 +37,740 –274,670 –278,030
– +5.76 –14.07 +2.33
– – +2.01 –0.35
– – +0.69 +1.57
0.24 +21.42 +105.65 +58.29
298.16–1,000K 298.16–471K 471–600K 298.16–1,400K
–142,500 –141,590 –141,580 –56,910
– –13.82 –32.24 +0.69
– – – –
– – – –
+42.00 +103.90 +153.14 +16.03
1,400–1,763K 298.16–1,357K 1,357–1,502K
–58,160 +10,550 –43,880
–1.15 –1.15 +8.47
– –1.10 –2.60
– –0.10 –0.10
+22.71 +21.92 –3.72
The ∆Ho values are given in gram calories per mole. The a, b, and I values listed here make it possible for one to calculate the ∆F and ∆S values by use of the following equations:
∆Ft = ∆Ηo + 2.303aT log T + b x 10–3 T2 + c x l05 T–1 + IT ∆St = – a – 2.303a log T – 2b x 10–3T + c x l05 T–2 – I
Source: data from CRC Handbook of Materials Science, Vol I, Charles T. Lynch, Ed., CRC Press, Cleveland, (1974).
©2001 CRC Press LLC
6.2 Thermodynamics L Page 183 Wednesday, December 31, 1969 17:00
Table 67. HEAT OF
FORMATION OF INORGANIC OXIDES (SHEET 5 OF 16)
Temperature range of validity
∆H0
2.303a
b
c
I
2 Cu(l) + 1/2 O2(g) = Cu2O(l)
1,502–2,000K
–37,710
–12.48
+0.25
–0.10
+54.44
Cu(c) + 1/2 O2(g) = CuO(c)
298.16–1,357K 1,357–1,720K 1,720–2,000K 298.16–500K
–37,740 –39,410 –41,060 –2,160
–0.64 +4.17 –11.35 –10.36
–1.40 –2.15 +0.25 –
–0.10 –0.10 –0.10 –
+24.87 +12.05 +59.09 +95.14
298.16–2,000K 298.16–373.16K 298.16–2,000K 298.16–374.5K
–268,380 –70,600 –56,930 –72,760
–9.74 –18.26 +6.75 –18.10
–0.28 +0.64 –0.64 –
+1.54 –0.04 –0.08 –
+78.16 +91.67 –8.74 +93.59
298.16–2,000K 298.16–1,033K 1,033–1,179K
–58,970 –65,320 –62,380
+5.50 –11.26 +4.08
–0.75 +2.61 –0.75
+0.085 +0.44 +0.235
–3.74 +48.60 +3.00
Reaction
Cu(l) + 1/2 O2(g) = CuO(c) Cu(l) + 1/2 O2(g) = CuO(l) 2 Au(c) + 3/2 O2(g) = Au2O3(c) Hf(c) + O2(g) = HfO2 (monoclinic) H2(g) + 1/2 O2(g) = H2O(l) H2(g) + 1/2 O2(g) = H2O(g) D2(g) + 1/2 O2(g) = D2O(l)
D2(g) + 1 /2 O2(g) = D2O(g)
0.947 Fe(α) + 1/2 O2(g) = Fe0.9470(c)
0.947 Fe(α) + 1/2 O2(g) = Fe0.9470(c)
The ∆Ho values are given in gram calories per mole. The a, b, and I values listed here make it possible for one to calculate the ∆F and ∆S values by use of the following equations:
∆Ft = ∆Ηo + 2.303aT log T + b x 10–3 T2 + c x l05 T–1 + IT ∆St = – a – 2.303a log T – 2b x 10–3T + c x l05 T–2 – I
Source: data from CRC Handbook of Materials Science, Vol I, Charles T. Lynch, Ed., CRC Press, Cleveland, (1974).
©2001 CRC Press LLC
6.2 Thermodynamics L Page 184 Wednesday, December 31, 1969 17:00
Table 67. HEAT OF
FORMATION OF INORGANIC OXIDES (SHEET 6 OF 16)
Temperature range of validity
∆H0
2.303a
b
c
I
0.947 Fc(β) + 1/2 O2(g) = Fe0.9470(c)
1,179–1,650K
–66,750
–8.04
+0.67
–0.10
+42.28
0.947 Fe(γ) + 1/2 O2(g) = Fe0.9470(l)
1,650–1,674K 1,647–1,803K 1,803–2,000K 298.16–900K
–64,200 –59,650 –63,660 –268,310
–18.72 –6.84 –7.48 +5.87
+1.67 +0.25 +0.25 –12.45
–0.10 –0.10 –0.10 +0.245
+73.45 +34.81 +39.12 +73.11
900–1,033K 1,033–1,179K 1,179–1,674K 298.16–950K
–272,300 –262,990 –276,990 –200,000
–54.27 –5.71 ~4.05 –13.84
+11.65 +1.00 +5.50 –1.45
+0.245 –0.40 –0.40 +1.905
+233.52 +89.19 +213.52 +108.26
950–1,033K 1,033–1,050K 1,050–1,179K 1,179–1,674K
–202,960 –196,740 –193,200 –202,540
–42.64 –10.27 –0.39 –25.95
+7.85 +0.75 –0.13 +2.87
+0.13 –0.30 –0.30 –0.30
+188.48 +92.26 +59.96 +142.85
Reaction
0.947 Fe(γ) + 1/2 O2(g) = Fe0.9470(l)
0.947 Fe(δ) + 1/2 O2(g) = Fe0.9470(l)
3 Fe(α) + 2 O2(g) = Fe3O4(magnetite) 3 Fe(α) + 2 O2(g) = Fe3O4(β) 3 Fe(β) + 2 O2(g) = Fe3O4(β) 3 Fe(γ) + 2 O2(g) = Fe3O4(β)
2 Fe(α) + 3/2 O2(g) = Fe2O3(hematite) 2 Fe(α) + 3/2 O2(g) = Fe2O3(β) 2 Fe(β) + 3/2 O2(g) = Fe2O3(β) 2 Fe(β) + 3/2 O2(g) = Fe2O3(γ) 2 Fe(γ) + 3/2 O2(g) = Fe2O3(γ)
The ∆Ho values are given in gram calories per mole. The a, b, and I values listed here make it possible for one to calculate the ∆F and ∆S values by use of the following equations:
∆Ft = ∆Ηo + 2.303aT log T + b x 10–3 T2 + c x l05 T–1 + IT ∆St = – a – 2.303a log T – 2b x 10–3T + c x l05 T–2 – I
Source: data from CRC Handbook of Materials Science, Vol I, Charles T. Lynch, Ed., CRC Press, Cleveland, (1974).
©2001 CRC Press LLC
6.2 Thermodynamics L Page 185 Wednesday, December 31, 1969 17:00
Table 67. HEAT OF
FORMATION OF INORGANIC OXIDES (SHEET 7 OF 16)
Reaction 2 Fe(α) + 3/2 O2(g) = Fe2O3(γ) Pb(c) + 1/2 O2(g) = PbO (red) Pb(l) + 1/2 O2(g) = PbO (red) Pb(c) + 1/2 O2(g) = PbO (yellow) Pb(l) + 1/2 O2(g) = PbO (yellow) I2(c) + 5/2 O2(g) = I2O5(c) I2(l) + 5/2 O2(g) = I2O5(c) I2(g) + 5/2 O2(g) = I2O5(c)
Ir(c) + O2(g) = IrO2(c) 3 Pb(c) + 2 O2(g) = Pb3O4(c) Pb(c) + O2(g) = PbO2(c) 2 Li(c) + 1/2 O2(g) = Li2O(c)
Temperature range of validity
∆H0
2.303a
b
c
I
1,674–1,800K 298.16–600.5K 600.5–762K 298.16–600.5K
–192,920 –52,800 –53,780 –52,040
–0.85 –2.76 –0.51 +0.81
–0.13 –0.80 –1.75 –2.00
–0.30 –0.10 –0.10 –0.10
+61.21 +32.49 +28.44 +22.13
600.5–1,159K 298.16–386.8K 386.8–456K 456–500K
–53,020 –42,040 –43,490 –58,020
+3.06 +2.30 +16.12 –6.91
–2.95 – – –
–0.10 – – –
+18.08 +113.71 +81.70 +174.79
298.16–1,300K 298.16–600.5K 298.16–600.5K 298.16–452K
–39,480 –174,920 –66,120 –142,220
+8.17 +8.82 +0.64 –3.06
–6.39 –8.20 –2.45 +5.77
–0.20 –0.40 –0.20 –0.10
+20.33 +72.78 +45.58 +34.19
The ∆Ho values are given in gram calories per mole. The a, b, and I values listed here make it possible for one to calculate the ∆F and ∆S values by use of the following equations:
∆Ft = ∆Ηo + 2.303aT log T + b x 10–3 T2 + c x l05 T–1 + IT ∆St = – a – 2.303a log T – 2b x 10–3T + c x l05 T–2 – I
Source: data from CRC Handbook of Materials Science, Vol I, Charles T. Lynch, Ed., CRC Press, Cleveland, (1974).
©2001 CRC Press LLC
6.2 Thermodynamics L Page 186 Wednesday, December 31, 1969 17:00
Table 67. HEAT OF
FORMATION OF INORGANIC OXIDES (SHEET 8 OF 16)
Reaction Mg(c) + 1/2 O2(g) = MgO (periclase) Mg(l) + 1/2 O2(g) = MgO (periclase) Mg(g) + 1/2 O2(g) = MgO (periclase) Mn(α) + 1/2 O2(g) = MnO(c) Mn(β) + 1/2 O2(g) = MnO(c) Mn(γ) + 1/2 O2(g) = Mno(c)
Mn(δ) + 1/2 O2(g) = MnO(c) Mn(l) + 1/2 O2(g) = MnO(c) 3 Mn(α) + 2 O2(g) = Mn3O4(α)
2 Mn(α) + 3/2 O2(g) = Mn2O3(c) Mn(α) + O2(g) = MnO2(c)
2 Hg(l) + 1/2 O2(g) = Hg2O(c) Hg(l) + 1/2 O2(g) = HgO (red) Mo(c) + O2(g) = MoO2(c)
Temperature range of validity
∆H0
2.303a
b
c
I
298.16–923K 923–1,393K 1,393–2,000K 298.16–1,000K
–144,090 –145,810 –180,700 –92,600
–1.06 +1.84 –3.75 –4.21
+0.13 –0.62 –0.62 +0.97
+0.25 +0.64 +0.64 +0.155
+29.16 +23.07 +65.69 +29.66
1,000–1,374K 1,374–1,410K 1,410–1,517K 1,517–2,000K
–91,900 –89,810 –89,390 –93,350
+1.84 +7.30 +8.68 +7.99
–0.39 –0.72 –0.72 –0.72
+0.34 +0.34 +0.34 +0.34
+12.15 –6.05 –10.70 –5.90
298.16–1,000K 298.16–1,000K 298.16–1,000K 298.16–629.88K
–332,400 –230,610 –126,400 –22,400
–7.41 –5.96 –8.61 –4.61
+0.66 –0.06 +0.97 –
+0.145 +0.945 +1.555 –
+106.62 +80.74 +70.14 +43.29
298.16–629.88K 298.16–2,000K
–21,760 –132,910
+0.85 –3.91
–2.47 –
–0.10 –
+24.81 +47.42
The ∆Ho values are given in gram calories per mole. The a, b, and I values listed here make it possible for one to calculate the ∆F and ∆S values by use of the following equations:
∆Ft = ∆Ηo + 2.303aT log T + b x 10–3 T2 + c x l05 T–1 + IT ∆St = – a – 2.303a log T – 2b x 10–3T + c x l05 T–2 – I
Source: data from CRC Handbook of Materials Science, Vol I, Charles T. Lynch, Ed., CRC Press, Cleveland, (1974).
©2001 CRC Press LLC
6.2 Thermodynamics L Page 187 Wednesday, December 31, 1969 17:00
Table 67. HEAT OF
FORMATION OF INORGANIC OXIDES (SHEET 9 OF 16)
Temperature range of validity
∆H0
2.303a
b
c
I
Mo(c) + 3/2 O2(g) = MoO3(c)
298.16–1,068K 298.16–633K
–182,650 –57,640
–8.86 –4.61
–1.55 +2.16
+1.54 –0.10
+90.07 +34.41
Ni(β) + 1/2 O2(g) = NiO(c)
633–1,725K 298.16–2,000K 298.16–1,785K 1,785–2,000K
–57,460 –382,050 –458,640 –463,630
–0.14 –9.67 –16.14 –66.04
–0.46 – –0.56 +2.21
–0.10 – +1.94 –0.50
+23.27 +116.23 +157.66 +317.84
298.16–2,000K 298.16–2,000K 298.16–317.4K 317.4–553K
18,650 +33,980 –9,370 –9,390
–1.57 +2.03 +2.53 +3.45
–0.27 –0.48 – –
+0.92 +0.36 – –
+23.47 +11.45 –25.40 –27.63
298.16–317.4K 298.16–336.4K
–711,520 –86,400
+95.67 –
–51.50 –
–1.00 –
–28.24 +33.90
Reaction Ni(α) + 1/2 O2(g) = NiO(c)
2 Nb(c) + 2 O2(g) = Nb2O4(c) 2 Nb(c) + 5/2 O2(g) = Nb2O5(c) 2 Nb(c) + 5/2 O2(g) = Nb2O5(l)
N2(g) + 1/2 O2(g) = N2O(g) 3/2 O2(g) = O3(g) P (white) + 1/2 O2(g) = PO(g) P(l) + 1/2 O2(g) = PO(g) 4 P (white) + 5 O2(g) = P4H10 (hexagonal) 2 K(c) + 1/2 O2(g) = K2O(c)
The ∆Ho values are given in gram calories per mole. The a, b, and I values listed here make it possible for one to calculate the ∆F and ∆S values by use of the following equations:
∆Ft = ∆Ηo + 2.303aT log T + b x 10–3 T2 + c x l05 T–1 + IT ∆St = – a – 2.303a log T – 2b x 10–3T + c x l05 T–2 – I
Source: data from CRC Handbook of Materials Science, Vol I, Charles T. Lynch, Ed., CRC Press, Cleveland, (1974).
©2001 CRC Press LLC
6.2 Thermodynamics L Page 188 Wednesday, December 31, 1969 17:00
Table 67. HEAT OF
FORMATION OF INORGANIC OXIDES (SHEET 10 OF 16)
Reaction 2 K(l) + 1/2 O2(g) = K2O(c) 2 K(g) + 1/2 O2(g) = K2O(c) Ra(c) + 1/2 O2(g) = RaO(c) Re(c) + 3/2 O2(g) = ReO3(c) Re(c) + 3/2 O2(g) = ReO3(l) 2Re(c) + 7/2 02(g) = Re2O7(c)
2 Re(c) + 7/2 02(g) = Re2O7(l) 2 Re(c) + 4 O2(g) = Re2O8(l) 2 Rb(c) + 1/2 O2(g) = Rb2O(c) 2 Rb(l) + 1/2 O2(g) = Rb2O(c) Se(c) + 1/2 O2(g) = SeO(g) Se(l) + 1/2 O2(g) = SeO(g) 1/2 Se2(g) + 1/2 O2(g) = SeO(g) Si(c) + 1/2 O2(g) = SiO(g)
Temperature range of validity
∆H0
2.303a
b
c
I
336.4–1,049K 1,049–1,500K
–87,380 –133,090
+1.15 –16.12
– –
– –
+33.90 +129.64
298.16–1,000K 298.16–433K 433–1,000K 298.16–569K
–130,000 –149,090 –146,750 –301,470
– –16.12 –31.32 –34.64
– – – –
– – – –
+23.50 +110.49 +145.16 +250.57
569–635.5K 420–600K 298.16–312.2K 312.2–750K
–295,810 –318,470 –78,900 –79,950
–73.68 –87.50 – –
– – – –
– – – –
+348.45 +425.32 +32.20 +35.56
298.16–490K 490–1,027K 1,027–2,000K 298.16–1,683K
+9,280 +9,420 –7,400 –21,090
–3.04 +8.70 –0.37 +3.84
+4.40 – – –0.16
+0.30 +0.30 +0.19 –0.295
–14.78 –44.50 –0.80 –33.14
The ∆Ho values are given in gram calories per mole. The a, b, and I values listed here make it possible for one to calculate the ∆F and ∆S values by use of the following equations:
∆Ft = ∆Ηo + 2.303aT log T + b x 10–3 T2 + c x l05 T–1 + IT ∆St = – a – 2.303a log T – 2b x 10–3T + c x l05 T–2 – I
Source: data from CRC Handbook of Materials Science, Vol I, Charles T. Lynch, Ed., CRC Press, Cleveland, (1974).
©2001 CRC Press LLC
6.2 Thermodynamics L Page 189 Wednesday, December 31, 1969 17:00
Table 67. HEAT OF
FORMATION OF INORGANIC OXIDES (SHEET 11 OF 16)
Reaction Si(l) + 1/2 O2(g) = SiO(g) Si(c) + O2(g) = SiO2(α–quartz) Si(c) + O2(g) = SiO2(β–quartz) Si(l) + O2(g) = SiO2(l)
Si(c) + O2(g) = SiO2(α–cristobalite) Si(c) + O2(g) = SiO2(β–cristobalite) Si(c) + 02(g) = SiO2(α–tridymite) Si(c) + O2(g) = SiO2(β–tridymite) 2 Ag(c) + 1/2 O2(g) = Ag2O2(c) 2 Ag(c) + O2(g) = Ag2O2(c) 2 Na(c) + 1/2 O2(g) = Na2O(c) 2 Na(l) + 1/2 O2(g) = Na2O(c)
Temperature range of validity
∆H0
2.303a
b
c
I
1,683–2,000K 298.16–848K 848–1,683K 1,883–2,000K
–30,170 –210,070 –209,920 –228,590
–7.78 +3.98 –3.36 –15.66
–0.12 –3.32 –0.19 –
+0.25 +0.605 –0.745 –
–40.01 +34.59 +53.44 +103.97
298.16–523K 523–1,683K 298.16–390K 390–1,683K
–207,330 –209,820 –207,030 –209,350
+19.96 –3.34 +22.29 –1.59
–9.75 –0.24 –11.62 –0.54
–0.745 –0.745 –0.745 –0.745
–9.78 +53.35 –15.64 +47.86
298.16–1,000K 298.16–500K 298.16–371K 371–1,187K
–7,740 –6,620 –99,820 –100,150
–4.14 –3.22 –7.51 +4.97
– – +5.47 –2.45
– – –0.10 –0.10
+27.84 +52.17 +50.43 +22.19
The ∆Ho values are given in gram calories per mole. The a, b, and I values listed here make it possible for one to calculate the ∆F and ∆S values by use of the following equations:
∆Ft = ∆Ηo + 2.303aT log T + b x 10–3 T2 + c x l05 T–1 + IT ∆St = – a – 2.303a log T – 2b x 10–3T + c x l05 T–2 – I
Source: data from CRC Handbook of Materials Science, Vol I, Charles T. Lynch, Ed., CRC Press, Cleveland, (1974).
©2001 CRC Press LLC
6.2 Thermodynamics L Page 190 Wednesday, December 31, 1969 17:00
Table 67. HEAT OF
FORMATION OF INORGANIC OXIDES (SHEET 12 OF 16)
Temperature range of validity
∆H0
2.303a
b
c
I
298.16–371K 298.16–1,043K 298.16–368.6K 368.6–392K
–122,500 –142,410 +19,250 +19,200
–2.30 –6.79 –1.24 –1.29
– +0.305 +2.95 +3.31
– +0.675 +0.225 +0.225
+57.51 +44.33 –18.84 –18.72
392–718K 298.16–2,000K 298.16–368.6K 368.6–392K
+20,320 +3,890 –70,980 –71,020
+10.22 +0.07 +0.83 +0.78
–0.17 – +2.35 +2.71
+0.225 – +0.51 +0.51
–50.05 –1.50 –5.85 –5.74
S(rhombohedral) + 3/2 O2(g) = SO3(c–II)
392–718K 298.16–2,000K 298.16–335.4K 298.16–305.7K
–69,900 –86,330 –111,370 –108,680
+12.30 +2.42 –6.45 –11.97
–0.77 –0.70 – –
+0.51 +0.31 – –
–37.10 +10.71 +88.32 +94.95
S(rhombohedral) + 3/2 O2(g) = SO3(l)
298.16–335.4K
–107,430
–21.18
–
–
+113.76
Reaction 2 Na(c) + O2(g) = Na2O2(c) Sr(c) + 1/2 O2(g) = SrO(c) S(rhombohedral) + 1/2 O2(g) = SO(g) S(monoclmic) + 1/2 O2(g) = SO(g)
S(lλ,µ) + 1/2 O2(g) = SO(g) 1/2 S2 (g) + 1/2 O2(g) = SO(g) S(rhombohedral) + O2(g) = SO2(g) S(monoclinic) + O2(g) = SO2(g) S(lλ,µ) + O2(g) = SO2(g) 1/2 S2(g) + O2(g) = SO2(g) S(rhombohedral) + 3/2 O2(g) = SO3(c–I)
The ∆Ho values are given in gram calories per mole. The a, b, and I values listed here make it possible for one to calculate the ∆F and ∆S values by use of the following equations:
∆Ft = ∆Ηo + 2.303aT log T + b x 10–3 T2 + c x l05 T–1 + IT ∆St = – a – 2.303a log T – 2b x 10–3T + c x l05 T–2 – I
Source: data from CRC Handbook of Materials Science, Vol I, Charles T. Lynch, Ed., CRC Press, Cleveland, (1974).
©2001 CRC Press LLC
6.2 Thermodynamics L Page 191 Wednesday, December 31, 1969 17:00
Table 67. HEAT OF
FORMATION OF INORGANIC OXIDES (SHEET 13 OF 16)
Reaction S(rhombohedral) + 3/2 O2(g) = SO3(g) S(monoclinic) + 3/2 O2(g) = SO3(g) S(lλ,µ) + 3/2 O2(g) = SO3(g)
1/2 S2(g) + 3/2 O2(g) = SO3(g) 2 Ta(c) + 5/2 O2(g) = Ta2O5(c) Te(c) + 1/2 O2(g) = TeO(g) Te(l) + 1/2 O2(g) = TeO(g) 2 Tl(α) + O2(g) = Tl2rO(c) 2 Tl(β) + O2(g) = Tl2rO(c)
2 Tl(α) + 3/2 O2(g) = Tl2rO3(c) Th(c) + O2(g) = ThO2(c) Sn(c) + 1/2 O2(g) = SnO(c)
Temperature range of validity
∆H0
2.303a
b
c
I
298.16–368.6K 368.6–392K 392–718K
–95,070 –95,120 –94,010
+1.43 +1.38 +12.89
+0.66 +1.02 –2.46
+1.26 +1.26 +126
+16.81 +16.93 –14.40
298.16–1,500K 298.16–2,000K 298.16–723K 723–1,360K
–110,420 –492,790 +43,110 +39,750
+3.02 –17.18 +1.91 +6.08
–2.39 –1.25 +0.84 +0.09
+106 +2.46 +0.315 +0.315
+33.41 +161.68 –27.22 –33.94
298.16–505.5K 505.5–573K 298.16–505.5K 298.16–2,000K
–44,110 –44,260 –99,410 –294,350
–6.91 –6.91 –16.12 –5.25
– – – +0.59
– – – +0.775
+42.30 +42.60 +119.09 +62.81
298.16–505K
–68,600
–3.57
+1.65
–0.10
+32.59
The ∆Ho values are given in gram calories per mole. The a, b, and I values listed here make it possible for one to calculate the ∆F and ∆S values by use of the following equations:
∆Ft = ∆Ηo + 2.303aT log T + b x 10–3 T2 + c x l05 T–1 + IT ∆St = – a – 2.303a log T – 2b x 10–3T + c x l05 T–2 – I
Source: data from CRC Handbook of Materials Science, Vol I, Charles T. Lynch, Ed., CRC Press, Cleveland, (1974).
©2001 CRC Press LLC
6.2 Thermodynamics L Page 192 Wednesday, December 31, 1969 17:00
Table 67. HEAT OF
FORMATION OF INORGANIC OXIDES (SHEET 14 OF 16)
Reaction Sn(l) + 1/2 O2(g) = SnO(c) Sn(c) + O2(g) = SnO2(c)
Ti(α) + 1/2 O2(g) = TiO(α) Ti(α) + 1/2 O2(g) = TiO(α)
2 Ti(α) + 3/2 O2(g) = Ti2O3(α) 2 Ti(α) + 3/2 O2(g) = Ti2O3(β) Ti(α) + O2(g) = TiO2 (rutile)
Ti(α) + O2(g) = TiO2 (rutile) W(c) + O2(g) = WO2(c) 4W(c) + 11/2 O2(g) = W4O11(c) W(c) + 3/2 O2(g) = WO3(c) W(c) + 3/2 O2(g) = WO3(l) U(α) + O2(g) = UO2(c) U(β) + O2(g) = UO2(c)
Temperature range of validity
∆H0
2.303a
b
c
I
505–1,300K 298.16–505K 298.16–1,150K
–69,670 –0,142 –125,010
+3.06 –14.00 –4.01
–1.50 +2.45 –0.29
–0.10 +2.38 +0.83
+18.39 +90.74 +36.28
1,150–1,264K 298.16–473K 473–1,150K 298.16–1,150K
–125,040 –360,660 –369,710 –228,360
+1.17 +32.08 –30.95 –12.80
–1.55 –23.49 +2.62 +1.62
+0.83 –0.30 +4.80 +1.975
+21.90 –10.66 +162.79 +82.81
1,150–2,000K
–228,380
–7.62
+0.36
+1.975
+68.43
298.16–1,500K
–137,180
–1.38
–
–
+45.56
298.16–1,700K 298.16–1,743K
–745,730 –201,180
–32.70 –2.92
– –1.81
– –0.30
+321.84 +70.89
1,743–2,000K 298.16–935K 935–1,045K
–203,140 –262,880 –260,660
–35.74 –19.92 –4.28
+1.13 +3.70 –0.31
–0.30 +2.13 +1.78
+173.27 +100.54 +55.50
The ∆Ho values are given in gram calories per mole. The a, b, and I values listed here make it possible for one to calculate the ∆F and ∆S values by use of the following equations:
∆Ft = ∆Ηo + 2.303aT log T + b x 10–3 T2 + c x l05 T–1 + IT ∆St = – a – 2.303a log T – 2b x 10–3T + c x l05 T–2 – I
Source: data from CRC Handbook of Materials Science, Vol I, Charles T. Lynch, Ed., CRC Press, Cleveland, (1974).
©2001 CRC Press LLC
6.2 Thermodynamics L Page 193 Wednesday, December 31, 1969 17:00
Table 67. HEAT OF
FORMATION OF INORGANIC OXIDES (SHEET 15 OF 16)
Temperature range of validity
∆H0
2.303a
b
c
I
U(γ) + O2(g) = UO2(c)
1,045–1,405K
–262,830
–6.54
–0.31
+1.78
+64.41
U(l) + O2(g) = UO2(l)
1,405–1,500K 298.16–935K 935–1,045K 1,045–1,405K
–264,790 –863,370 –856,720 –863,230
–5.92 –56.57 –9.67 –16.44
– +10.68 –1.35 –1.35
– +5.20 +4.15 +4.15
+63.50 +330.19 +195.12 +221.79
1,405–1,500K 298.16–935K 935–1,045K 1,045–1,400K
–869,460 –294,090 –291,870 –294,040
–10.91 –18.33 –2.69 –4.95
–1.35 +3.49 –0.52 –0.52
+4.15 +1.535 +1.185 +1.185
+208.82 +114.94 +69.90 +78.80
298.16–2,000K 298.16–2,000K 298.16–2,000K
–101,090 +52,090 –299,910
–5.39 +1.80 –17.98
–0.36 +1.04 +0.37
+0.53 +0.35 +2.41
+38.69 –28.42 +118.83
Reaction
3 U(α) + 4 O2(g) = U3O8(c) 3 U(β) + 4 O2(g) = U3O8(c) 3 U(γ) + 4 O2(g) = U3O8(c) 3 U(l) + 4 O2(g) = U3O8(c)
U(α) + 3/2 O2(g) = UO3 (hexagonal) U(β) + 3/2 O2(g) = UO3 (hexagonal) U(γ) + 3/2 O2(g) = UO3 (hexagonal) V(c) + 1/2 O2(g) = VO(c) V(c) + 1/2 O2(g) = VO(g) 2 V(c) + 3/2 O2(g) = V2O3(c)
The ∆Ho values are given in gram calories per mole. The a, b, and I values listed here make it possible for one to calculate the ∆F and ∆S values by use of the following equations:
∆Ft = ∆Ηo + 2.303aT log T + b x 10–3 T2 + c x l05 T–1 + IT ∆St = – a – 2.303a log T – 2b x 10–3T + c x l05 T–2 – I
Source: data from CRC Handbook of Materials Science, Vol I, Charles T. Lynch, Ed., CRC Press, Cleveland, (1974).
©2001 CRC Press LLC
6.2 Thermodynamics L Page 194 Wednesday, December 31, 1969 17:00
Table 67. HEAT OF
FORMATION OF INORGANIC OXIDES (SHEET 16 OF 16)
Temperature range of validity
∆H0
2.303a
b
c
I
2 V(c) + 2 O2(g) = V2O4(α)
209.16–345K
–342,890
–11.03
+3.00
–0.40
+117.38
2 V(c) + 2 O2(g) = V2O4(β)
345–1,818K 298.16–1,000K 298.16–943K 298.16–1,773K
–345,330 –1,076,340 –381,960 –419,600
–24.36 –95.33 –41.08 +2.76
+1.30 – +5.20 –1.73
+3.545 – +6.11 –0.30
+155.55 +557.61 +228.50 +66.36
298.16–692.7K 298.16–1,135K 1,135–1,478K 1.478–2,000K
–84,670 –262,980 –264,190 –262,290
–6.40 –6.10 –5.09 –7.76
+0.84 +0.16 –0.40 +0.50
+0.99 +1.045 +1.48 –0.20
+43.25 +65.00 +63.58 +69.50
Reaction
6 V(c) + 13/2 O2(g) = V6O13(c) 2 V(c) + 5/2 O2(g) = V2O5(c) 2 Y(c) + 3/2 O2(g) = Y2O3(c) Zn(c) + 1/2 O2(g) = ZnO(c) Zr(α) + O2(g) = ZrO2(α) Zr(β) + O2(g) = ZrO2(α) Zr(β) + O2(g) = ZrO2(β)
The ∆Ho values are given in gram calories per mole. The a, b, and I values listed here make it possible for one to calculate the ∆F and ∆S values by use of the following equations:
∆Ft = ∆Ηo + 2.303aT log T + b x 10–3 T2 + c x l05 T–1 + IT ∆St = – a – 2.303a log T – 2b x 10–3T + c x l05 T–2 – I
Source: data from CRC Handbook of Materials Science, Vol I, Charles T. Lynch, Ed., CRC Press, Cleveland, (1974).
©2001 CRC Press LLC
6.3 Thermodynamics Page 195 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 68. PHASE
CHANGE THERMODYNAMIC PROPERTIES FOR THE ELEMENTS (SHEET 1 OF 7) Heat of Transition (kcal • g mole-1)
Entropy of Transition
Element
Phase
Transition Temperature (K)
Ac
solid liquid
(1090) (2750)
(2.5) (70)
(2.3) (25)
Ag
solid liquid
1234 2485
2.855 60.72
2.313 24.43
Al
solid liquid
931.7 2600
2.57 67.9
2.76 26
Am
solid liquid
(1200) 2733
(2.4) 51.7
(2.0) 18.9
As
solid
883
3.25
35.25
Au
solid liquid
1336.16 2933
3.03 74.21
2.27 25.30
B
solid liquid
2313 2800
(3.8) 75
(1.6) 27
Ba
solid, α solid, β liquid
648 977
0.14 1.83
0.22 1.87
1911
35.665
18.63
Be
solid liquid
1556 –
2.919
1.501
Bi
solid liquid
544.2 1900
2.63 41.1
4.83 21.6
C
solid
–
–
–
Ca
solid, α solid, β liquid
723 1123
0.24 2.2
0.33 1.96
1755
38.6
22.0
(e.u.)
Source: data from Weast, R. C. Ed., Handbook of Chemistry and Physics, 69th ed., CRC Press, Boca Raton, Fla., 1988, D44.
©2001 CRC Press LLC
Shackelford & Alexander
195
6.3 Thermodynamics Page 196 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 68. PHASE
CHANGE THERMODYNAMIC PROPERTIES FOR THE ELEMENTS (SHEET 2 OF 7) Heat of Transition (kcal • g mole-1)
Entropy of Transition
Element
Phase
Transition Temperature (K)
Cd
solid liquid
594.1 1040
1.46 23.86
2.46 22.94
Ce
solid liquid
1048 2800
2.1 73
2.0 26
Cl2
gas
–
–
–
Co
solid, α solid, β solid, γ liquid
723 1398 1766
0.005 0.095 3.7
0.007 0.068 2.1
3370
93
28
Cr
solid liquid
2173 2495
3.5 72.97
1.6 29.25
Cs
solid liquid
301.9 963
0.50 16.32
1.7 17.0
Cu
solid liquid
1356.2 2868
3.11 72.8
2.29 25.4
F2
gas
–
–
–
Fe
solid, α solid, β solid, γ solid, δ liquid
1033 1180 1673 1808
0.410 0.217 0.15 3.86
0.397 0.184 0.084 2.14
3008
84.62
28.1
solid liquid
302.94 2700
1.335 –
4.407 –
Ga
(e.u.)
Source: data from Weast, R. C. Ed., Handbook of Chemistry and Physics, 69th ed., CRC Press, Boca Raton, Fla., 1988, D44.
©2001 CRC Press LLC
196
CRC Handbook of Materials Science & Engineering
6.3 Thermodynamics Page 197 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 68. PHASE
CHANGE THERMODYNAMIC PROPERTIES FOR THE ELEMENTS (SHEET 3 OF 7) Heat of Transition (kcal • g mole-1)
Entropy of Transition
Element
Phase
Transition Temperature (K)
Ge
solid liquid
1232 2980
8.3 68
6.7 23
H2
gas
–
–
–
Hf
solid
(2600)
(6.0)
(2.3)
Hg
liquid
629.73
13.985
22.208
In
solid liquid
430 2440
0.775 53.8
1.80 22.0
Ir
solid
2727
6.6
2.4
K
solid liquid
336.4 1052
0.5575 18.88
1.657 17.95
La
solid liquid
1153 3000
(2.3) 80
(2.0) 27
Li
solid liquid
459 1640
0.69 32.48
1.5 19.81
Mg
solid liquid
923 1393
2.2 31.5
2.4 22.6
Mn
solid, α solid, β solid, γ solid, δ liquid
1000 1374 1410 1517
0.535 0.545 0.430 3.5
0.535 0.397 0.305 2.31
2368
53.7
22.7
solid
2883
(5.8)
(2.0)
Mo
(e.u.)
Source: data from Weast, R. C. Ed., Handbook of Chemistry and Physics, 69th ed., CRC Press, Boca Raton, Fla., 1988, D44.
©2001 CRC Press LLC Shackelford & Alexander
197
6.3 Thermodynamics Page 198 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 68. PHASE
CHANGE THERMODYNAMIC PROPERTIES FOR THE ELEMENTS (SHEET 4 OF 7) Heat of Transition (kcal • g mole-1)
Entropy of Transition
Element
Phase
Transition Temperature (K)
N2
gas
–
–
–
Na
solid liquid
371 1187
0.63 23.4
1.7 20.1
Nb
solid
2760
(5.8)
(2.1)
Nd
solid liquid
1297 (2750)
(2.55) (61)
(197) (22)
Ni
solid α solid β liquid
626 1728
0.092 4.21
0.15 2.44
3110
90.48
29.0
Np
solid liquid
913 (2525)
(2.3) (55)
(2.5) (22)
O2
gas
–
–
–
Os
solid
2970
(6.4)
(2.2)
P4
solid, white
317.4
0.601
1.89
liquid
553
11.9
21.5
Pa
solid liquid
(18.25) (4500)
(4.0) (115)
(2.2) (26)
Pb
solid liquid
600.6 2023
1.141 42.5
1.900 21.0
Pd
solid liquid
1828 3440
4.12 89
2.25 26
(e.u.)
Source: data from Weast, R. C. Ed., Handbook of Chemistry and Physics, 69th ed., CRC Press, Boca Raton, Fla., 1988, D44.
©2001 CRC Press LLC
198
CRC Handbook of Materials Science & Engineering
6.3 Thermodynamics Page 199 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 68. PHASE
CHANGE THERMODYNAMIC PROPERTIES FOR THE ELEMENTS (SHEET 5 OF 7) Heat of Transition (kcal • g mole-1)
Entropy of Transition
Element
Phase
Transition Temperature (K)
Po
solid liquid
525 (1235)
(2.4) (24.6)
(4.6) (19.9)
Pr
solid liquid
1205 3563
(25) –
(2.1) –
Pt
solid liquid
2042.5 4100
5.2 122
25 29.8
Pu
solid liquid
913 –
(2.26)
(2.48)
Ra
solid liquid
1233 (1700)
(2.3) (35)
(1.9) (21)
Rb
solid liquid
312.0 952
0.525 18.11
1.68 19.0
Re
solid
3440
(7.9)
(2.3)
Rh
solid liquid
2240 4150
(5.2) 127
(2.3) 30.7
Ru
solid, α solid, β solid, γ solid, δ
1308 1473 1773 2700
0.034 0 0.23 (6.1)
0.026 – 0.13 (2.3)
S
solid, α solid, β liquid
368.6 392
0.088 0.293
0.24 0.747
717.76
2.5
3.5
Sb
solid (α, β, γ) liquid
(e.u.)
903.7
4.8
5.3
1713
46.665
27.3
Source: data from Weast, R. C. Ed., Handbook of Chemistry and Physics, 69th ed., CRC Press, Boca Raton, Fla., 1988, D44.
©2001 CRC Press LLC Shackelford & Alexander
199
6.3 Thermodynamics Page 200 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 68. PHASE
CHANGE THERMODYNAMIC PROPERTIES FOR THE ELEMENTS (SHEET 6 OF 7) Heat of Transition (kcal • g mole-1)
Entropy of Transition
Element
Phase
Transition Temperature (K)
Sc
solid liquid
1670 3000
(4.0) 80
(2.4) 27
Se
solid liquid
490.6 1000
1.25 14.27
2.55 14.27
Si
solid liquid
1683 2750
11.1 71
6.60 26
Sm
solid liquid
1623 (2800)
3.7 (70)
2.3 (25)
Sn
solid, α, β liquid
505.1
1.69
335
2473
(55)
(22)
Sr
solid liquid
1043 1657
2.2 33.61
2.1 20.28
Ta
solid
3250
7.5
2.3
Tc
solid liquid
(2400) (3800)
(5.5) (120)
(2.3) (32)
Te
solid, α solid, β liquid
621 723
0.13 4.28
0.21 5.92
1360
11.9
8.75
Th
solid liquid
2173 4500
(4.6) (130)
(2.1) (29)
Ti
solid, α solid, β liquid
1155 2000
0.950 (4.6)
0.822 (23)
3550
(101)
(28)
(e.u.)
Source: data from Weast, R. C. Ed., Handbook of Chemistry and Physics, 69th ed., CRC Press, Boca Raton, Fla., 1988, D44.
©2001 CRC Press LLC
200
CRC Handbook of Materials Science & Engineering
6.3 Thermodynamics Page 201 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 68. PHASE
CHANGE THERMODYNAMIC PROPERTIES FOR THE ELEMENTS (SHEET 7 OF 7) Transition Temperature (K)
Heat of Transition (kcal • g mole-1)
Entropy of Transition
(e.u.)
Element
Phase
Tl
solid, α solid, β liquid
508.3 576.8
0.082 1.03
0.16 1.79
1730
38.81
22.4
solid, α solid, β solid, γ liquid
938 1049 1405
0.665 1.165 (3.0)
0.709 1.111 (2.1)
3800
–
–
V
solid liquid
2003 3800
(4.0) –
(2.0) –
W
solid
3650
8.42
2.3
Y
solid liquid
1750 3500
(4.0) (90)
(2.3) (26)
Zn
solid liquid
692.7 1180
1.595 27.43
2.303 23.24
Zr
solid, α solid, β liquid
1135 2125
0.920 (4.9)
0.811 (2.3)
(3900)
(100)
(26)
U
Source: data from Weast, R. C. Ed., Handbook of Chemistry and Physics, 69th ed., CRC Press, Boca Raton, Fla., 1988, D44.
©2001 CRC Press LLC
Shackelford & Alexander
201
6.3 Thermodynamics Page 202 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 69. PHASE
CHANGE THERMODYNAMIC PROPERTIES OF OXIDES (SHEET 1 OF 10) Heat of Transition (kcal • g mole-1)
Entropy of Transition (e.u.)
Oxide
Phase
Transition Temperature (K)
Ac2O3
Solid Liquid
(2250) –
(20) –
(8.9) –
Ag2O
Solid Solid
dec. 460
–
–
dec.
–
–
Solid
2300 dec.
26 –
11 –
(2225) (3400) dec.
(17) (85) –
(7.6) (25) –
503 586 730
4.1 4.4 7.15
8.2 7.5 9.79
(9.0) – –
(7.5) – –
Ag2O2 Al2O3
Liquid Am2O3
Solid Liquid
AmO2
Solid
As2O3
Solid, α Solid, β Liquid
AsO2
Solid
As2O5
Solid
(1200) (dec.) dec. >1100
Au2O3
Solid
dec.
–
–
Solid
723 2520
5.27 (55)
7.29 (22)
(880) (1040) 2196 3000 723 dec. 1110
(5.2) (20) 13.8 (62) (5.7) –
(5.9) (19) 6.28 (21) (7.9) –
Liquid
B2O3
Liquid Ba2O
Solid
BaO
Liquid Solid Liquid
BaO2
Solid Liquid
Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
202
CRC Handbook of Materials Science & Engineering
6.3 Thermodynamics Page 203 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 69. PHASE
CHANGE THERMODYNAMIC PROPERTIES OF OXIDES (SHEET 2 OF 10) Heat of Transition (kcal • g mole-1)
Entropy of Transition (e.u.)
Oxide
Phase
Transition Temperature (K)
BeO
Solid
dec.
–
–
BiO
Solid Liquid
(1175) (1920) 1090 (dec.)
(3.7) (54) 6.8 –
(3.1) (28) 6.2 –
Bi2O3
Solid Liquid
CO CO2
Gas
– –
– –
– –
CaO
Solid
2860
(18)
(6.3)
CdO
Solid
dec.
–
–
Solid
1960 (3500) 3000
(20) (80) (19)
(10) (23) (6.3)
2078 (2900) dec. 1240
(12) (61) –
(5.8) (21) –
2538 dec. 700 460 (1000)
(25) – (6.1) (25)
(10) – (13) (25)
763 dec. 867 dec.
(4.58) – (5.5) –
(6.0) – (6.3) –
775 dec.
(7.75) –
(10) –
Ce2O3
Gas
Liquid CeO2
Solid
CoO
Solid Liquid
Co3O4
Solid
Cr2O3 CrO2 CrO3
Solid Solid Solid Liquid
Cs2O
Solid Liquid
Cs2O2
Solid Liquid
Cs2O3
Solid Liquid
Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
Shackelford & Alexander
203
6.3 Thermodynamics Page 204 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 69. PHASE
Oxide
Phase
CHANGE THERMODYNAMIC PROPERTIES OF OXIDES (SHEET 3 OF 10) Transition Temperature (K)
Heat of Transition (kcal • g mole-1)
Entropy of Transition (e.u.)
Cu2O
Solid
CuO
Liquid Solid Liquid
1503 dec. 1609 dec.
13.4 – (8.9) –
8.92 – (5.5) –
Solid Liquid Solid, α Solid, β Solid, α Solid, β Solid, γ
1641 (2700) 900 dec. 950 1050 dec.
7.5 (55) (0) – 0.16 0 –
4.6 (20) (0) – 0.17 0 –
Solid Liquid Liquid
(925) (1000) 2013 (2900)
(8.5) (20) (22) (75)
(9.2) (20) (11) (26)
GeO GeO2
Solid Solid (α,β) Liquid
983 1389 (2625)
(50) 10.5 (61)
(51) 7.56 (23)
In2O
Solid Liquid Solid Liquid
(600) (800) (1325) (2000)
(4.5) (16) (4.0) (60)
(7.5) (20) (3.0) (30)
In2O3
Solid Liquid
(2000) (3600)
(20) (85)
(10) (24)
Ir2O3
Solid Liquid Solid
(1450) (2250) dec. 1373
(10) (50) –
(6.8) (22) –
FeO Fe3O4 Fe2O3
Ga2O Ga2O3
Solid
InO
IrO2
Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
204
CRC Handbook of Materials Science & Engineering
6.3 Thermodynamics Page 205 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 69. PHASE
CHANGE THERMODYNAMIC PROPERTIES OF OXIDES (SHEET 4 OF 10) Heat of Transition (kcal • g mole-1)
Entropy of Transition (e.u.)
Oxide
Phase
Transition Temperature (K)
K2O
Solid Liquid Solid Liquid Solid Liquid Solid Liquid
(980) dec. 763 (1800) 703 (975) 653 dec.
(6.8) – (7.0) (45) (6.1) (25) (4.9) –
(6.9) – (9.2) (25) (8.7) (26) (7.5) –
La2O3
Solid
2590
(18)
(7)
Li2O Li2O2
Solid Liquid Solid
2000 2600 dec.470
(14) (56) –
(7) (22) –
MgO MgO2
Solid Solid
3075 dec. 361
18.5 –
5.8 –
MnO
Solid Liquid
2058 dec.
13.0 –
6.32 –
Mn3O4
Solid, α Solid, β Liquid Solid Solid
1445 1863 (2900) dec. 1620 dec. 1120
4.97 (33) (75) – –
3.44 (18) (26) – –
Solid Liquid Solid Liquid
(2200) dec. 2250 1068 1530
(16) – 12.54 33
(7.3) – 11.74 22
Gas
–
–
–
K2O2 K2O3 KO2
Mn2O3 MnO2 MoO2 MoO3
N 2O
Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
Shackelford & Alexander
205
6.3 Thermodynamics Page 206 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 69. PHASE
CHANGE THERMODYNAMIC PROPERTIES OF OXIDES (SHEET 5 OF 10) Heat of Transition (kcal • g mole-1)
Entropy of Transition (e.u.)
Oxide
Phase
Transition Temperature (K)
Na2O
Solid Liquid Solid Solid Liquid
1193 dec. dec. 919 (825) (1300)
(7.1) – – (6.2) (28)
(6.0) – – (7.5) (22)
Solid Solid Liquid Solid Liquid
(2650) (2275) (3800) 1733 (3200)
(16) (16) (85) (28) (80)
(6.0) (7.0) (22) (16) (25)
Nd2O3
Solid
2545
(22)
(8.8)
NiO
Solid Liquid
2230 dec.
(12.1) –
(5.43) –
NpO2
Solid Solid
(15) –
(5.7) –
– 3.41 9.45
– 10.9 23.4
Na2O2 NaO2
NbO NbO2 Nb2O5
OsO2 OsO4
Solid Solid Liquid
(2600) dec. 800–900 K dec. 923 313.3 403
P2O3 PO2
Liquid Solid Liquid Solid
448.5 (350) (dec.) 631
4.5 (2.7) – 8.8
10 (7.7) – 13.9
Solid Solid Liquid
(2560) (2050) (3350)
(20) (26) (95)
(7.8) (13) (28)
Np2O5
P2O5 PaO2 Pa2O5
Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
206
CRC Handbook of Materials Science & Engineering
6.3 Thermodynamics Page 207 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 69. PHASE
CHANGE THERMODYNAMIC PROPERTIES OF OXIDES (SHEET 6 OF 10) Heat of Transition (kcal • g mole-1)
Entropy of Transition (e.u.)
Oxide
Phase
Transition Temperature (K)
PbO
Solid, red Solid, yellow Liquid
762 1159 1745
(0.4) 2.8 51
(0.5) 2.4 29
Pb2O4 PbO2
Solid Solid
dec. dec.
– –
– –
PdO
Solid
dec. 1150
–
–
PoO2
Solid Liquid
(825) (dec.)
(5.5) –
(6.7) –
Pr2O3
Solid Liquid
(2200) (4000
(22) (90)
(10) (23)
PrO2
Solid
dec. 700
–
–
PtO Pt3O4 PtO2
Solid Solid Solid Liquid
dec. 780 (dec.) 723 dec. 750
– – (4.6) –
– – (6.4) –
PuO
Solid Liquid
(1290) (2325)
(7.2) (47)
(5.6) (20)
Pu2O3
Solid Liquid
(1880) (3250)
(16) (75)
(8.5) (23)
PuO2
Solid Liquid
(2400) (3500)
(15) (90)
(6.2) (26)
RaO
Solid
(>2500)
–
–
Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
Shackelford & Alexander
207
6.3 Thermodynamics Page 208 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 69. PHASE
CHANGE THERMODYNAMIC PROPERTIES OF OXIDES (SHEET 7 OF 10) Heat of Transition (kcal • g mole-1)
Entropy of Transition (e.u.)
Oxide
Phase
Transition Temperature (K)
Rb2O
Solid Liquid Solid Liquid
(910) dec. 843 (dec.)
(5.7) – (7.3) –
(6.3) – (8.7) –
Solid Liquid Solid Liquid
762 dec. 685 dec.
(7.6) – (4.1) –
(10) – (6.0) –
Solid Liquid Solid Liquid
(1475) (3250) 433 dec.
(12) (80) 5.2 –
(8.1) (25) 12 –
Solid Liquid Solid Liquid
569 635.5 420 (460)
15.8 17.7 (4.2) (9.3)
27.8 27.9 (10) (20)
Rh2O RhO Rh2O3
Solid Solid Solid
dec. 1400 dec. 1394 dec. 1388
– – –
– – –
RuO2 RuO4
Solid Solid Liquid
dec. 1400 300 dec.
– (3.2) –
– (11) –
SO2
Gas
–
–
Sb2O3
Solid Liquid
14.74 8.92
15.88 5.25
Rb2O2
Rb2O3 RbO2
ReO2 ReO3
Re2O7 ReO4
– 928 1698
Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
208
CRC Handbook of Materials Science & Engineering
6.3 Thermodynamics Page 209 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 69. PHASE
CHANGE THERMODYNAMIC PROPERTIES OF OXIDES (SHEET 8 OF 10) Heat of Transition (kcal • g mole-1)
Entropy of Transition (e.u.)
Oxide
Phase
Transition Temperature (K)
SbO2 Sb2O5
Solid Solid
dec. dec.
– –
– –
Sc2O3
Solid
(2500)
(23)
(9.3)
SeO SeO2
Solid Liquid Solid
(1375) (2075) 603
(7.6) (45) (24.5)
(5.5) (22) (40.6)
SiO
Solid
(2550)
(12)
(4.7)
SiO2
Solid, β Solid, α Liquid
856 1883 dec. 2250
0.15 2.04 –
0.18 1.08 –
Sm2O3
Solid Liquid
(2150) (3800)
(20) (80)
(9.3) (21)
SnO
Solid Liquid Solid Liquid
(1315) (1800) 1898 (3200)
(6.4) (60) (11.39) (75)
(4.9) (33) (5.95) (23)
SrO SrO2
Solid Solid
2703 dec.488
16.7 –
6.2 –
Ta2O5
Solid Liquid
2150 –
(16) –
(7.4) –
TcO2
Solid Liquid Solid Solid Liquid
(2400) (4000) (dec. <1200) 392.7 583.8
(18) (105) – (11) (14)
(7.5) (26) – (28) (24)
SnO2
TcO3 Tc2O7
Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC Shackelford & Alexander
209
6.3 Thermodynamics Page 210 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 69. PHASE
CHANGE THERMODYNAMIC PROPERTIES OF OXIDES (SHEET 9 OF 10) Heat of Transition (kcal • g mole-1)
Entropy of Transition (e.u.)
Oxide
Phase
Transition Temperature (K)
TeO
Solid Liquid Solid Liquid
(1020) (1775) 1006 dec.
(7.1) (50) 3.2 –
(7.0) (28) 3.2 –
TeO2
Solid Liquid
(2150) (3250)
(13) (65)
(6.0) (20)
ThO2
Solid
3225
(18)
(5.6)
TiO
Solid, α Solid, β Solid, α Solid, β Liquid Solid, α Solid, β Liquid Solid Liquid
1264 dec. 2010 473 2400 3300 450 (2450) (3600) 2128 dec. 3200
0.82 – 0.215 (24)
0.65 – 0.455 (10)
2.24 (50) (85) (16)
4.98 (20) (24) (7.5)
Ti2O
Solid Liquid
573 773
(5.0) (17)
(8.7) (22)
Tl2O3
Solid Liquid
990 (dec.)
(12.4) –
(13) –
UO UO2
Solid Solid Solid Solid
(2750) 3000 dec. dec. 925
(14) – – –
(5.1) – – –
TeO3
Ti2O3
Ti3O5
TiO2
U3O8 UO3
Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
210
CRC Handbook of Materials Science & Engineering
6.3 Thermodynamics Page 211 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 69. PHASE
Oxide
Phase
VO
Solid Liquid Solid Liquid Solid Liquid
V2O3 V3O4
VO2
V2O5
WO2 WO3
Solid, α Solid, β Liquid Solid Liquid Solid Liquid Solid Liquid
CHANGE THERMODYNAMIC PROPERTIES OF OXIDES (SHEET 10 OF 10) Transition Temperature (K)
Heat of Transition (kcal • g mole-1)
Entropy of Transition (e.u.)
(2350) (3400)
(15) (70)
(6.4) (21)
(11)
2240
(24)
dec. 3300
–
–
(2100)
(42)
(20)
(dec.)
–
–
345 1818
1.02 13.60
2.96 7.48
dec. 3300
–
–
943
15.56
16.50
(2325)
(63)
(27)
(7.45)
(1543)
(11.5)
dec. 2125
–
–
1743
(17)
(9.8)
(2100)
(43)
(20)
(25)
(10)
Y2O3
Solid
(2500)
ZnO ZrO2
Solid Solid, α Solid, β
dec.
–
–
1478 2950
1.420 20.8
0.961 7.0
Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
Shackelford & Alexander
211
6.3 Thermodynamics Page 212 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 70. MELTING
POINTS OF THE ELEMENTS (SHEET 1 OF 4)
At. No.
Element
Symbol
Melting Point (˚C)
1 2 3 4
Hydrogen Helium Lithium Beryllium
H He Li Be
-259.14 -272.2 180.54 1278
5 6 7 8
Boron Carbon Nitrogen Oxygen
B C N O
2300 ~3550 -209.86 -218.4
9 10 11 12
Fluorine Neon Sodium Magnesium
F N Na Mg
-219.62 -248.67 97.81 648.8
13 14 15
Aluminum Silicon Phosphorus (White)
Al Si P
660.37 1410 44.1
16 17 18 19
Sulfur Chlorine Argon Potassium
S Cl Ar K
112.8 -100.98 -189.2 63.65
20 21 22 23
Calcium Scandium Titanium Vanadium
Ca Sc Ti V
839 1539 1660 1890
24 25 26 27
Chromium Manganese Iron Cobalt
Cr Mn Fe Co
1857 1244 1535 1495
Source: data from James F. Shackelford, Introduction to Materials Science for Engineers, Second Edition, Macmillan Publishing Company, New York, pp.686-688, (1988).
©2001 CRC Press LLC
212
CRC Handbook of Materials Science & Engineering
6.3 Thermodynamics Page 213 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 70. MELTING
POINTS OF THE ELEMENTS (SHEET 2 OF 4)
At. No.
Element
Symbol
Melting Point (˚C)
28 29 30 31
Nickel Copper Zinc Gallium
Ni Cu Zn Ga
1453 1083.4 419.58 29.78
32 33 34 35
Germanium Arsenic Selenium Bromine
Ge As Se Br
937.4 817 217 -7.2
36 37 38 39
Krypton Rubidium Strontium Yttrium
Kr Rb Sr Y
-156.6 38.89 769 1523
40 41 42 43
Zirconium Niobium Molybdenum Technetium
Zr Nb Mo Tc
1852 2408 2617 2172
44 45 46 47
Ruthenium Rhodium Palladium Silver
Ru Rh Pd Ag
2310 1966 1552 961.93
48 49 50 51
Cadmium Indium Tin Antimony
Cd In Sn Sb
320.9 156.61 231.9681 630.74
52 53 54 55
Tellurium Iodine Xenon Cesium (-10˚)
Te I Xe Ce
449.5 113.5 -111.9 28.4
Source: data from James F. Shackelford, Introduction to Materials Science for Engineers, Second Edition, Macmillan Publishing Company, New York, pp.686-688, (1988).
©2001 CRC Press LLC Shackelford & Alexander
213
6.3 Thermodynamics Page 214 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 70. MELTING
POINTS OF THE ELEMENTS (SHEET 3 OF 4)
At. No.
Element
Symbol
Melting Point (˚C)
56 57 58 59
Barium Lantium Cerium Praseodymium
Ba La Ce Pr
7.25 920 798 931
60 61 62 63
Neodymium Promethium Samarium Europium
Nd Pm Sm Eu
1010 ~1080 1072 822
64 65 66 67
Gadolinium Terbium Dysprosium Holmium
Gd Tb Dy Ho
1311 1360 1409 1470
68 69 70 71
Erbium Thulium Ytterbium Lutetium
Er Tm Yb Lu
1522 1545 824 1659
72 73 74 75
Hafnium Tantalum Tungsten Rhenium
Hf Ta W Re
2227 2996 3410 3180
76 77 78 79
Osmium Iridium Platinum Gold
Os Ir Pt Au
3045 2410 1772 1064.43
80 81 82 83
Mercury Thallium Lead Bismuth
Hg Tl Pb Bi
-38.87 303.5 327.502 271.3
Source: data from James F. Shackelford, Introduction to Materials Science for Engineers, Second Edition, Macmillan Publishing Company, New York, pp.686-688, (1988).
©2001 CRC Press LLC
214
CRC Handbook of Materials Science & Engineering
6.3 Thermodynamics Page 215 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 70. MELTING
POINTS OF THE ELEMENTS (SHEET 4 OF 4)
At. No.
Element
Symbol
Melting Point (˚C)
84 85 86 87
Polonium Asatine Radon Francium
Po At Rn Fr
254 302 -71 ~27
88 89 90 91
Radium Actinium Thorium Protoactinium
Ra Ac Th Pa
700 1050 1750 <1600
92 93 94 95
Uranium Neptunium Plutonium Americium
U Np Pu Am
1132 640 641 994
96
Curium
Cm
1340
Source: data from James F. Shackelford, Introduction to Materials Science for Engineers, Second Edition, Macmillan Publishing Company, New York, pp.686-688, (1988).
©2001 CRC Press LLC
Shackelford & Alexander
215
6.3 Thermodynamics Page 216 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 71. MELTING
POINTS OF ELEMENTS AND
INORGANIC COMPOUNDS (SHEET 1 OF 13) Formula
Melting Point ˚C
Actinium227 Aluminum Aluminum bromide
Ac Al Al2Br6
1050±50 658.5 87.4
Aluminum chloride
Al2Cl6
192.4
Compound
Aluminum iodide
Al2I6
190.9
Aluminum oxide Antimony Antimony pentachloride
Al2O3 Sb SbCl5
2045.0 630 4.0
Antimony tribromide Antimony trichloride
SbBr3 SbCl3
Antimony trioxide
Sb4O6
96.8 73.3 655.0
Antimony trisulfide
Sb4S6
546.0
Argon Arsenic Arsenic pentafluoride Arsenic tribromide
Ar As AsF5 AsBr3
190.2 816.8 80.8 30.0
Arsenic trichloride Arsenic trifluoride
AsCl3 AsF3
Arsenic trioxide Barium
As4O6 Ba
–16.0 –6.0 312.8 725
Barium bromide Barium chloride Barium fluoride Barium iodide
BaBr2 BaCl2 BaF2 BaI2
846.8 959.8 1286.8 710.8
Source: data from: Weast, R C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, (1974); and Bolz, R. E. and Tuve, G. L., Eds., Handbook of Tables for Applied Engineering Science, 2nd ed., CRC Press, Cleveland, (1973), p.479 .
©2001 CRC Press LLC
216
CRC Handbook of Materials Science & Engineering
6.3 Thermodynamics Page 217 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 71. MELTING
POINTS OF ELEMENTS AND
INORGANIC COMPOUNDS (SHEET 2 OF 13) Formula
Melting Point ˚C
Barium nitrate Barium oxide Barium phosphate Barium sulfate
Ba(NO3)2 BaO Ba3(PO4)2 BaSO4
594.8 1922.8 1727 1350
Beryllium Beryllium bromide Beryllium chloride Beryllium oxide
Be BeBr2 BeCl2 BeO
1278 487.8 404.8 2550.0
Bismuth Bismuth trichloride Bismuth trifluoride
Bi BiCl3 BiF3
Bismuth trioxide
Bi2O3
271 223.8 726.0 815.8
Boron Boron tribromide Boron trichloride Boron trifluoride
B BBr3 BCl3 BF3
2300 –48.8 –107.8 –128.0
Boron trioxide Bromine Bromine pentafluoride Cadmium
B2O3 Br2 BrF5 Cd
448.8 –7.2 –61.4 320.8
Cadmium bromide Cadmium chloride Cadmium fluoride Cadmium iodide
CdBr2 CdCl2 CdF2 CdI2
567.8 567.8 1110 386.8
Compound
Source: data from: Weast, R C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, (1974); and Bolz, R. E. and Tuve, G. L., Eds., Handbook of Tables for Applied Engineering Science, 2nd ed., CRC Press, Cleveland, (1973), p.479 .
©2001 CRC Press LLC Shackelford & Alexander
217
6.3 Thermodynamics Page 218 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 71. MELTING
POINTS OF ELEMENTS AND
INORGANIC COMPOUNDS (SHEET 3 OF 13) Formula
Melting Point ˚C
Cadmium sulfate Calcium Calcium bromide Calcium carbonate
CdSO4 Ca CaBr2 CaCO3
1000 851 729.8 1282
Calcium chloride Calcium fluoride Calcium metasilicate
CaCl2 CaF2 CaSiO3 Ca(NO3)2
782 1382 1512 560.8
Calcium oxide Calcium sulfate Carbon dioxide Carbon monoxide
CaO CaSO4 CO2 CO
2707 1297 –57.6 –205
Cyanogen Cyanogen chloride Cerium Cesium
C2N2 CNCl Ce Cs
–27.2 –5.2 775 28.3
Cesium chloride Cesium nitrate Chlorine Chromium
CsCl CsNO3 Cl2 Cr
38.5 406.8 –103±5 1890
Chromium (II) chloride
CrCl2
Chromium (III) sequioxide Chromium trioxide Cobalt
Cr2O3 CrO3 Co
814 2279 197 1490
Compound
Calcium nitrate
Source: data from: Weast, R C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, (1974); and Bolz, R. E. and Tuve, G. L., Eds., Handbook of Tables for Applied Engineering Science, 2nd ed., CRC Press, Cleveland, (1973), p.479 .
©2001 CRC Press LLC
218
CRC Handbook of Materials Science & Engineering
6.3 Thermodynamics Page 219 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 71. MELTING
POINTS OF ELEMENTS AND
INORGANIC COMPOUNDS (SHEET 4 OF 13) Formula
Melting Point ˚C
CoCl2 Cu CuCl2 CuCl
727 1083 430 429
Copper(l) cyanide Copper (I) iodide Copper (II) oxide Copper (I) oxide
Cu2(CN)2 CuI CuO Cu2O
473 587 1446 1230
Copper (I) sulfide Dysprosium Erbium Europium
Cu2S Dy Er Eu
1129 1407 1496 826
Europium trichloride Fluorine Gadolinium Gallium
EuCl3 F2 Gd Ga
622 –219.6 1312 29
Germanium Gold Hafnium Holmium
Ge Au Hf Ho
959 1063 2214 1461
Hydrogen Hydrogen bromide Hydrogen chloride Hydrogen fluoride
H2 HBr HCl HF
–259.25 –86.96 –114.3 83.11
HI HNO3
Compound
Cobalt (II) chloride Copper Copper (II) chloride Copper (I) chloride
Hydrogen iodide Hydrogen nitrate Hydrogen oxide (water)
H2O
–50.91 –47.2 0
Deuterium oxide
D2O
3.78
Source: data from: Weast, R C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, (1974); and Bolz, R. E. and Tuve, G. L., Eds., Handbook of Tables for Applied Engineering Science, 2nd ed., CRC Press, Cleveland, (1973), p.479 .
©2001 CRC Press LLC Shackelford & Alexander
219
6.3 Thermodynamics Page 220 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 71. MELTING
POINTS OF ELEMENTS AND
INORGANIC COMPOUNDS (SHEET 5 OF 13) Formula
Melting Point ˚C
Hydrogen peroxide
H2O2
–0.7
Hydrogen selenate
H2SeO4
57.8
Hydrogen sulfate
H2SO4
10.4
Hydrogen sulfide
H2S
–85.6
Hydrogen sulfide, di–
H2S2
–89.7
Hydrogen telluride Indium lodine
H2Te In I2
–49.0 156.3 112.9
lodine chloride (α) lodine chloride (β) Iron Iron carbide
ICl ICl Fe Fe3C
17.1 13.8 1530.0 1226.8
Iron (III) chloride Iron (II) chloride Iron (II) oxide Iron oxide
Fe2Cl6 FeCl2 FeO Fe3O4
303.8 677 1380 1596
Iron pentacarbonyl Iron (II) sulfide Lanthanum Lead
Fe(CO)5 FeS La Pb
–21.2 1195 920 327.3
PbBr2 PbCl2 PbF2 PbI2
487.8 497.8 823 412
Compound
Leadbromide Lead chloride Lead fluoride Lead iodide
Source: data from: Weast, R C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, (1974); and Bolz, R. E. and Tuve, G. L., Eds., Handbook of Tables for Applied Engineering Science, 2nd ed., CRC Press, Cleveland, (1973), p.479 .
©2001 CRC Press LLC
220
CRC Handbook of Materials Science & Engineering
6.3 Thermodynamics Page 221 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 71. MELTING
POINTS OF ELEMENTS AND
INORGANIC COMPOUNDS (SHEET 6 OF 13) Formula
Melting Point ˚C
Lead molybdate Lead oxide Lead sulfate Lead sulfide
PbMoO4 PbO PbSO4 PbS
1065 890 1087 1114
Lithium Lithium bromide Lithium chloride Lithium fluoride
Li LiBr LiCl LiF
178.8 552 614 896
Lithium hydroxide Lithium iodide Lithium metasilicate
LiOH LiI Li2SiO3
462 440 1177
Lithium molybdate
Li2MoO4
705
Lithium nitrate
LiNO3
Lithium orthosilicate
Li4SiO4
250 1249
Lithium sulfate
Li2SO4
857
Lithium tungstate
Li2WO4
742
Lutetium Magnesium Magnesium bromide Magnesium chloride
Lu Mg MgBr2 MgCl2
1651 650 711 712
Magnesium fluoride Magnesium oxide Magnesium silicate Magnesium sulfate
MgF2 MgO MgSiO3 MgSO4
1221 2642 1524 1327
Compound
Source: data from: Weast, R C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, (1974); and Bolz, R. E. and Tuve, G. L., Eds., Handbook of Tables for Applied Engineering Science, 2nd ed., CRC Press, Cleveland, (1973), p.479 .
©2001 CRC Press LLC Shackelford & Alexander
221
6.3 Thermodynamics Page 222 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 71. MELTING
POINTS OF ELEMENTS AND
INORGANIC COMPOUNDS (SHEET 7 OF 13) Formula
Melting Point ˚C
Manganese Manganese dichloride Manganese metasilicate Manganese (II) oxide
Mn MnCl2 MnSiO3 MnO
1220 650 1274 1784
Manganese oxide Mercury Mercury bromide Mercury chloride
Mn3O4 Hg HgBr2 HgCl2
1590 –39 241 276.8
Mercury iodide Mercury sulfate Molybdenum Molybdenum dichloride
HgI2 HgSO4 Mo MoCl2
250 850 2622 726.8
Molybdenum hexafluoride Molybdenum trioxide Neodymium Neon
MoF6 MoO3 Nd Ne
17 795 1020 – 248.6
Nickel Nickel chloride
Ni NiCl2
Nickel subsulfide Niobium
Ni3S2 Nb
1452 1030 790 2496
Niobium pentachloride
NbCl5
Niobium pentoxide Nitric oxide Nitrogen
Nb2O5 NO N2
Compound
21 l 1511 –163.7 –210
Source: data from: Weast, R C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, (1974); and Bolz, R. E. and Tuve, G. L., Eds., Handbook of Tables for Applied Engineering Science, 2nd ed., CRC Press, Cleveland, (1973), p.479 .
©2001 CRC Press LLC
222
CRC Handbook of Materials Science & Engineering
6.3 Thermodynamics Page 223 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 71. MELTING
POINTS OF ELEMENTS AND
INORGANIC COMPOUNDS (SHEET 8 OF 13) Formula
Melting Point ˚C
Nitrogen tetroxide
N2O4
–13.2
Nitrous oxide Osmium Osmium tetroxide (white)
N2O Os OsO4
–90.9 2700 41.8
Osmium tetroxide (yellow) Oxygen Palladium Phosphoric acid
OsO4 O2 Pd H3PO4
55.8 –218.8 1555 42.3
Phosphoric acid. hypo–
H4P2O6
54.8
Phosphorus acid, hypo–
H3PO2
17.3
Phosphorus acid, ortho– Phosphorus oxychloride
H3PO3 POCl3
73.8 1.0
Phosphorus pentoxide
P4O10
569.0
Phosphorus trioxide Phosphorus, yellow Platinum
P4O6 P4 Pt
23.7 44.1 1770
K KBO2 KBr K2CO3
63.4 947 742 897
KCl K2CrO4 KCN K2Cr2O7
770 984 623 398
Compound
Potassium Potassium borate, meta– Potassium bromide Potassium carbonate Potassium chloride Potassium chromate Potassium cyanide Potassium dichromate
Source: data from: Weast, R C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, (1974); and Bolz, R. E. and Tuve, G. L., Eds., Handbook of Tables for Applied Engineering Science, 2nd ed., CRC Press, Cleveland, (1973), p.479 .
©2001 CRC Press LLC
Shackelford & Alexander
223
6.3 Thermodynamics Page 224 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 71. MELTING
POINTS OF ELEMENTS AND
INORGANIC COMPOUNDS (SHEET 9 OF 13) Formula
Melting Point ˚C
Potassium fluoride Potassium hydroxide Potassium iodide Potassium nitrate
KF KOH Kl KNO3
875 360 682 338
Potassium peroxide
K2O2
490
Compound
Potassium phosphate
K3PO4
1340
Potassium pyro– phosphate
K4P2O7
1092
Potassium sulfate
K2SO4
1074
Potassium thiocyanate Praseodymium Rhenium Rhenium heptoxide
KSCN Pr Re Re2O7
179 931 3167±60 296
Rhenium hexafluoride Rubidium Rubidium bromide Rubidium chloride
ReF6 Rb RbBr RbCl
19.0 38 .9 677 717
Rubidium fluoride Rubidium iodide Rubidium nitrate Samarium
RbF Rbl RbNO3 Sm
833 638 305 1072
Scandium Selenium Seleniumoxychloride
Sc Se SeOCl3
Silane, hexaHuoro–
Si2F6
1538 217 9.8 –28.6
Silicon Silicon dioxide (Cristobalite) Silicon tetrachloride
Si SiO2 SiCl4
1427 1723 –67.7
Source: data from: Weast, R C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, (1974); and Bolz, R. E. and Tuve, G. L., Eds., Handbook of Tables for Applied Engineering Science, 2nd ed., CRC Press, Cleveland, (1973), p.479 .
©2001 CRC Press LLC
224
CRC Handbook of Materials Science & Engineering
6.3 Thermodynamics Page 225 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 71. MELTING
POINTS OF ELEMENTS AND
INORGANIC COMPOUNDS (SHEET 10 OF 13) Formula
Melting Point ˚C
Silver Silver bromide Silver chloride Silver cyanide
Ag AgBr AgCl AgCN
961 430 455 350
Silver iodide Silver nitrate
Agl AgNO3
Silver sulfate
Ag2SO4
557 209 657
Silver sulfide
Ag2S
841
Sodium Sodium borate, meta– Sodium bromide Sodium carbonate
Na NaBO2 NaBr Na2CO3
97.8 966 747 854
Sodium chlorate Sodium chloride Sodium cyanide Sodium fluoride
NaClO3 NaCl NaCN NaF
255 800 562 992
NaOH Nal Na2MoO4 NaNO3
322 662 687 310
Na2O2 NaPO3
Compound
Sodium hydroxide Sodium iodide Sodium molybdate Sodium nitrate Sodium peroxide Sodium phosphate, meta– Sodium pyrophosphate
Na4P2O7
460 988 970
Sodiumsilicate,aluminum–
NaAlSi3O8
1107
Source: data from: Weast, R C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, (1974); and Bolz, R. E. and Tuve, G. L., Eds., Handbook of Tables for Applied Engineering Science, 2nd ed., CRC Press, Cleveland, (1973), p.479 .
©2001 CRC Press LLC
Shackelford & Alexander
225
6.3 Thermodynamics Page 226 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 71. MELTING
POINTS OF ELEMENTS AND
INORGANIC COMPOUNDS (SHEET 11 OF 13) Formula
Melting Point ˚C
Sodium silicate, di–
Na2Si2O5
884
Sodium silicate, meta–
Na2SiO3
1087
Sodium sulfate
Na2SO4
884
Sodium sulfide
Na2S
920
Sodium thiocyanate Sodium tungstate Strontium Strontium bromide
NaSCN Na2WO4 Sr SrBr2
323 702 757 643
Strontium chloride Strontium fluoride Strontium oxide Sulfur (monatomic)
SrCl2 SrF2 SrO S
872 1400 2430 119,
Sulfur dioxide Sulfur trioxide (α) Sulfur trioxide (β) Sulfur trioxide (γ)
SO2 SO3 SO3 SO3
– 73.2 16.8 32.3 62.1
Tantalum Tantalum pentachloride
Ta TaCl5
Tantalum pentoxide Tellurium
Ta2O5 Te
2996 ± 50 206.8 1877 453
Tb Tl TlBr Tl2CO3
1356 302.4 460 273
Compound
Terbium Thallium Thallium bromide, mono– Thallium carbonate
Source: data from: Weast, R C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, (1974); and Bolz, R. E. and Tuve, G. L., Eds., Handbook of Tables for Applied Engineering Science, 2nd ed., CRC Press, Cleveland, (1973), p.479 .
©2001 CRC Press LLC
226
CRC Handbook of Materials Science & Engineering
6.3 Thermodynamics Page 227 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 71. MELTING
POINTS OF ELEMENTS AND
INORGANIC COMPOUNDS (SHEET 12 OF 13) Compound
Formula
Melting Point ˚C
Thallium chloride, mono– Thallium iodide, mono– Thallium nitrate
TICl TlI TINO3
Thallium sulfate
Tl2SO4
427 440 207 632
Thallium sulfide Thorium Thorium chloride Thorium dioxide
Tl2S Th ThCl4 ThO2
449 1845 765 2952
Thulium Tin Tin bromide, di– Tin bromide, tetra–
Tm Sn SnBr2 SnBr4
1545 231.7 231.8 29.8
Tin chloride, di– Tinchloride,tetra– Tin iodide, tetra– Tin oxide
SnCl2 SnCl4 SnI4 SnO
247 –33.3 143.4 1042
Titanium Titanium bromide, tetra– Titanium chloride, tetra– Titanium dioxide
Ti TiBr4 TiCl4 TiO2
1800 38 –23.2 1825
Titanium oxide Tungsten Tungsten dioxide Tungsten hexafluoride
TiO W WO2 WF6
991 3387 1270 –0.5
Source: data from: Weast, R C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, (1974); and Bolz, R. E. and Tuve, G. L., Eds., Handbook of Tables for Applied Engineering Science, 2nd ed., CRC Press, Cleveland, (1973), p.479 .
©2001 CRC Press LLC
Shackelford & Alexander
227
6.3 Thermodynamics Page 228 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 71. MELTING
POINTS OF ELEMENTS AND
INORGANIC COMPOUNDS (SHEET 13 OF 13) Formula
Melting Point ˚C
Tungsten tetrachloride Tungsten trioxide
WCl4 WO3
327 1470
Uranium235 Uranium tetrachloride
U UCl4
~1133
Vanadium Vanadium dichloride Vanadium oxide Vanadium pentoxide
V VCl2 VO V2O5
1917 1027 2077 670
Xenon Ytterbium Yttrium Yttrium oxide
Xe Yb Y Y2O3
–111.6 823 1504 2227
Zinc Zincchloride Zinc oxide Zinc sulfide
Zn ZnCl2 ZnO ZnS
419.4 283 1975 1745
Zirconium Zirconium dichloride Zirconium oxide
Zr ZrCl2 ZrO2
1857 727 2715
Compound
590
Source: data from: Weast, R C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, (1974); and Bolz, R. E. and Tuve, G. L., Eds., Handbook of Tables for Applied Engineering Science, 2nd ed., CRC Press, Cleveland, (1973), p.479 .
©2001 CRC Press LLC
228
CRC Handbook of Materials Science & Engineering
6.3 Thermodynamics Page 229 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 72. MELTING POINTS OF (SHEET 1 OF 11) Compound
CERAMICS
(K)
AgBr AgCl AgF AgI
703 728 708 831
AgNO3 Ag2O
483
Ag2SO4 Ag2S
933 1098
AlBr3 Al4C3
2000
AlCl3 AlF3
1564
AlI AlN Al2O3
464 >2475 2322
573
371 465
Al2(SO4)3
1043
Al2S3 BBr3
1373
B4C BCl3
2720
BF3 BN B2O3
146 3000 723
BS4
663
227 166
Source: data from: Lynch, Charles T., Ed., CRC Handbook of Materials Science, Vol. 1, CRC Press, Boca Raton, 1974, 348.
©2001 CRC Press LLC
Shackelford & Alexander
229
6.3 Thermodynamics Page 230 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 72. MELTING POINTS OF (SHEET 2 OF 11) Compound
CERAMICS
(K)
BaB4 BaBr2 BaCl2
2543
BaF2
1627
BaI2 Ba(NO3)2
1013
BaO BaSO4
1123 1235
865 2283 1853
BaS BeB2
1473 >2243
BeBr2 Be2C
793 >2375
BeCl2 BeF2 BeI2
713
Be3N2
2513
BeO BeSO4
2725 848 491
BiBr3 BiCl3
813 783
507
BiF3 BiI3 B2O3
1000
Bi(SO4)3
678
681 1098
Source: data from: Lynch, Charles T., Ed., CRC Handbook of Materials Science, Vol. 1, CRC Press, Boca Raton, 1974, 348.
©2001 CRC Press LLC
230
CRC Handbook of Materials Science & Engineering
6.3 Thermodynamics Page 231 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 72. MELTING POINTS OF (SHEET 3 OF 11) Compound
CERAMICS
(K)
Bi2S3 CaBr2 CaCl2
1020
CaF2
1675
CaI2 Ca(NO3)2
848
Ca3N2 CaO
1468 3183
CaSO4 CdBr2
1723
CdCl2 CdF2
841
CdI2 Cd(NO3)2
1003 1055
623
841 1373 423
CdO CdSO4
834 1773 1273
CdS CeB6
2023 2463
CeCl3 CeF2
1095
CeI3 CeO2
1025
CeS Ce(SO4)2
1710
>2873 2400 468
Source: data from: Lynch, Charles T., Ed., CRC Handbook of Materials Science, Vol. 1, CRC Press, Boca Raton, 1974, 348.
©2001 CRC Press LLC
Shackelford & Alexander
231
6.3 Thermodynamics Page 232 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 72. MELTING POINTS OF (SHEET 4 OF 11) Compound
CERAMICS
(K)
CrB2 Cr3C2 CrN Cr2O3
2168 1770 >2603
CrSi2 CuBr CuCl CuF2
1843 777 695 1129
CuI Cu3N
878 573
Cu2O Cu4Si
1508
Cu2S FeBr2
1400
Fe3C FeCl2
2110
FeF3 Fe2O3
>1275
Fe2(SO4)3 FeS InBr3
2123
1123
955 945
1864 753 1468
InCl InF3
709 498 1443
InI3
483
Source: data from: Lynch, Charles T., Ed., CRC Handbook of Materials Science, Vol. 1, CRC Press, Boca Raton, 1974, 348.
©2001 CRC Press LLC
232
CRC Handbook of Materials Science & Engineering
6.3 Thermodynamics Page 233 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 72. MELTING POINTS OF (SHEET 5 OF 11) Compound
CERAMICS
(K)
In2O3
2183
In2S3 KBr KCl
1323 1008 1043
KF KI KNO3
1131 958 610
K2O3
703
K2SO4
1342
K2S LiBr LiCl
1113 823 883
LiF LiI LiNO3
1119 722 527
Li3N
1118
Li2O Li2SO4
>1975
Li2S MgBr2
1198
MgCl2 MgF2 MgI2 MgO Mg2Si MgS MgSO4 MnCl2
1132 984 987 1535 <910 3098 1375 >2275 1397 923
Source: data from: Lynch, Charles T., Ed., CRC Handbook of Materials Science, Vol. 1, CRC Press, Boca Raton, 1974, 348.
©2001 CRC Press LLC Shackelford & Alexander
233
6.3 Thermodynamics Page 234 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 72. MELTING POINTS OF (SHEET 6 OF 11) Compound
CERAMICS
(K)
MnF2 MnO MoB Mo2C
1129 1840 2625 2963
MoF6 MoI4
290
MoO3 MoSi2
1068
MoS2 NaBr NaC2 NaCl
1458 1023 973 1073
NaF NaI NaNO3
1267 935 583
Na2N
573
Na2SO4 Na2S
1157
NbB NbC
373 2553
1453 >2270 3770
NbN Nb2O5
2323 1764
NbSi2 NiBr2
2203
NiCl3 NiF2
1274 1273
NiI2
1070 2257
NiO
1236
Source: data from: Lynch, Charles T., Ed., CRC Handbook of Materials Science, Vol. 1, CRC Press, Boca Raton, 1974, 348.
©2001 CRC Press LLC
234
CRC Handbook of Materials Science & Engineering
6.3 Thermodynamics Page 235 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 72. MELTING POINTS OF (SHEET 7 OF 11) Compound
CERAMICS
(K)
NiSO4 NiS PbBr2 PbCl2
1121 1070 643
PbF2 PbI2 Pb(NO3)2
1095 675
PbO PbSO4
771
743 1159
PbS PtBr2
1443 1387 523
PtCl2
854
PtI2 PtS2
633 508
SbBr3 SbCl3
370
SbF3 SbI3
565 443
Sb2O3 SbS3
928
SiC SiF4
2970 183
Si3N4 SiO2
2715
346
820
1978
Source: data from: Lynch, Charles T., Ed., CRC Handbook of Materials Science, Vol. 1, CRC Press, Boca Raton, 1974, 348.
©2001 CRC Press LLC
Shackelford & Alexander
235
6.3 Thermodynamics Page 236 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 72. MELTING POINTS OF (SHEET 8 OF 11) Compound
CERAMICS
(K)
SnBr2 SnCl2 SnF4
488
SnI2
788
SnO SnSO4
581 978
SnS SrB6
1353 >635 1153 2508
SrBr2 SrC2
916 >1970
SrCl2 SrF2
1148
SrI2 Sr(NO3)2
593
SrO SrSO4 SrS TaB TaBr5 TaC
1736
643 2933 1878 >2275 >2270 538 3813
TaCl5 TaF5
489
Ta2N Ta2O5
3360
370 2100
Source: data from: Lynch, Charles T., Ed., CRC Handbook of Materials Science, Vol. 1, CRC Press, Boca Raton, 1974, 348.
©2001 CRC Press LLC
236
CRC Handbook of Materials Science & Engineering
6.3 Thermodynamics Page 237 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 72. MELTING POINTS OF (SHEET 9 OF 11) Compound
CERAMICS
(K)
TaSi2 TaS4 TeBr2
>1575
TeCl2
448
TeO2 ThB4 ThBr4
>2270
ThC ThCl4 ThF4
2670 612
1006 883 2898 1043
ThN ThO2
1375 2903 3493
ThS2 TiB2
2198 3253
TiBr4
312 3433
TiC TiCl4 TiF3 TiI2 TiN TiO2 TiSi2 UB2 UBr4
250 1475 873 3200 2113 1813 >1770 789
Source: data from: Lynch, Charles T., Ed., CRC Handbook of Materials Science, Vol. 1, CRC Press, Boca Raton, 1974, 348.
©2001 CRC Press LLC
Shackelford & Alexander
237
6.3 Thermodynamics Page 238 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 72. MELTING POINTS OF (SHEET 10 OF 11) Compound
CERAMICS
(K)
UC UCl4
2863 843
UF4 UI4
1233
UN UO2
3123 3151 1970
779
USi2 US2
>1375
VB2 VC VCl4
2373 3600 245
VF3
>1075
FI2 VN V2O5
1048 2593 947
VSi2
2023
V2S3
>875 3133 2900 548
WB WC WCl6 WO3 WSi2 WS2
1744
ZnBr2
667
ZnCl2 ZnF2 ZnI2 ZnO
2320 1523
548 1145 719 2248
Source: data from: Lynch, Charles T., Ed., CRC Handbook of Materials Science, Vol. 1, CRC Press, Boca Raton, 1974, 348.
©2001 CRC Press LLC
238
CRC Handbook of Materials Science & Engineering
6.3 Thermodynamics Page 239 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 72. MELTING POINTS OF (SHEET 11 OF 11) Compound ZnSO4 ZrB2 ZrBr2 ZrC ZrCl2 ZrF4 ZrI4 ZrN ZrO2 Zr(SO4)2 ZrS2
CERAMICS
(K)
873 3313 >625 3533 623 873 772 3250 3123 683 1823
Source: data from: Lynch, Charles T., Ed., CRC Handbook of Materials Science, Vol. 1, CRC Press, Boca Raton, 1974, 348.
©2001 CRC Press LLC
Shackelford & Alexander
239
6.3 Thermodynamics Page 240 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 73. HEAT OF
FUSION FOR ELEMENTS AND INORGANIC COMPOUNDS (SHEET 1 OF 16) Heat of fusion
Compound
Formula
Melting point ˚C
Actinium227 Aluminum Aluminum bromide
Ac
1050±50
(11.0)
Al
658.5
94.5
2550
Al2Br6
Aluminum chloride
Al2Cl6
87.4 192.4
10.1 63.6
5420 19600
Aluminum iodide
Al2I6
Aluminum oxide Antimony Antimony pentachloride
Al2O3 Sb SbCl5
190.9 2045.0
9.8 (256.0)
7960 (26000)
630
39.1
4770
4.0
8.0
2400
Antimony tribromide Antimony trichloride Antimony trioxide
SbBr3 SbCl3 Sb4O6
Antimony trisulfide
Sb4S6
96.8 73.3 655.0 546.0
9.7 13.3 (46.3) 33.0
3510 3030 (26990) 11200
Argon Arsenic Arsenic pentafluoride Arsenic tribromide
Ar As AsF5 AsBr3
190.2 816.8
7.25 (22.0)
290 (6620)
80.8 30.0
16.5 8.9
2800 2810
Arsenic trichloride Arsenic trifluoride Arsenic trioxide Barium
AsCl3 AsF3
–16.0 –6.0 312.8
13.3 18.9 22.2
2420 2486 8000
725
13.3
1830
As4O6 Ba
cal/g
cal/g mole
(3400)
For heat of fusion in J/kg, multiply values in cal/g by 4184. For heat of fusion in J/mol, multiply values in cal/g-mol (=cal/mol) by 4.184. For melting point in K, add 273.15 to values in ˚C. Values in parentheses are of uncertain reliability. Source: data from Weast, R C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, (1974); and Bolz, R. E. and Tuve, G. L., Eds., Handbook of Tables for Applied Engineering Science, 2nd ed., CRC Press, Cleveland, (1973)
©2001 CRC Press LLC
240
CRC Handbook of Materials Science & Engineering
6.3 Thermodynamics Page 241 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 73. HEAT OF
FUSION FOR ELEMENTS AND INORGANIC COMPOUNDS (SHEET 2 OF 16) Heat of fusion
Compound
Formula
Melting point ˚C
Barium bromide Barium chloride Barium fluoride Barium iodide
BaBr2 BaCl2 BaF2 BaI2
846.8 959.8 1286.8 710.8
21.9 25.9 17.1 (17.3)
6000 5370 3000 (6800)
Barium nitrate Barium oxide Barium phosphate Barium sulfate
Ba(NO3)2 BaO Ba3(PO4)2 BaSO4
(5900)
Beryllium Beryllium bromide Beryllium chloride Beryllium oxide
Be BeBr2 BeCl2 BeO
Bismuth Bismuth trichloride Bismuth trifluoride Bismuth trioxide
Bi BiCl3 BiF3
Boron Boron tribromide Boron trichloride Boron trifluoride
cal/g
cal/g mole
594.8
(22.6)
1922.8
93.2
13800
1727 1350
30.9 41.6
18600 9700
1278
260.0
–
487.8
(26.6)
(4500)
404.8 2550.0
(30) 679.7
(3000) 17000
271
12.0
2505
Bi2O3
223.8 726.0 815.8
8.2 (23.3) 14.6
2600 (6200) 6800
B BBr3 BCl3 BF3
2300
(490)
(5300)
–48.8 –107.8 –128.0
(2.9) (4.3) 7.0
(700) (500) 480
For heat of fusion in J/kg, multiply values in cal/g by 4184. For heat of fusion in J/mol, multiply values in cal/g-mol (=cal/mol) by 4.184. For melting point in K, add 273.15 to values in ˚C. Values in parentheses are of uncertain reliability. Source: data from Weast, R C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, (1974); and Bolz, R. E. and Tuve, G. L., Eds., Handbook of Tables for Applied Engineering Science, 2nd ed., CRC Press, Cleveland, (1973)
©2001 CRC Press LLC
Shackelford & Alexander
241
6.3 Thermodynamics Page 242 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 73. HEAT OF
FUSION FOR ELEMENTS AND INORGANIC COMPOUNDS (SHEET 3 OF 16) Heat of fusion
Melting point ˚C
cal/g
cal/g mole
Compound
Formula
Boron trioxide Bromine Bromine pentafluoride Cadmium
B2O3 Br2 BrF5 Cd
448.8 –7.2 –61.4
78.9 16.1 7.07
5500 2580 1355
320.8
12.9
1460
Cadmium bromide Cadmium chloride Cadmium fluoride Cadmium iodide
CdBr2 CdCl2 CdF2 CdI2
567.8 567.8 1110 386.8
(18.4) 28.8 (35.9) 10.0
(5000) 5300 (5400) 3660
Cadmium sulfate Calcium Calcium bromide Calcium carbonate
CdSO4 Ca CaBr2 CaCO3
1000
22.9
4790
851
55.7
2230
729.8 1282
20.9 (126)
4180 (12700)
Calcium chloride Calcium fluoride Calcium metasilicate Calcium nitrate
CaCl2 CaF2 CaSiO3 Ca(NO3)2
782 1382 1512 560.8
55 52.5 115.4 31.2
6100 4100 13400 5120
Calcium oxide Calcium sulfate Carbon dioxide Carbon monoxide
CaO CaSO4 CO2 CO
2707
(218.1)
(12240)
1297 –57.6
49.2 43.2
6700 1900
–205
7.13
199.7
For heat of fusion in J/kg, multiply values in cal/g by 4184. For heat of fusion in J/mol, multiply values in cal/g-mol (=cal/mol) by 4.184. For melting point in K, add 273.15 to values in ˚C. Values in parentheses are of uncertain reliability. Source: data from Weast, R C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, (1974); and Bolz, R. E. and Tuve, G. L., Eds., Handbook of Tables for Applied Engineering Science, 2nd ed., CRC Press, Cleveland, (1973)
©2001 CRC Press LLC
242
CRC Handbook of Materials Science & Engineering
6.3 Thermodynamics Page 243 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 73. HEAT OF
FUSION FOR ELEMENTS AND INORGANIC COMPOUNDS (SHEET 4 OF 16)
Compound
Formula
Cyanogen Cyanogen chloride Cerium Cesium
C2N2 CNCl Ce Cs
Cesium chloride Cesium nitrate Chlorine Chromium
CsCl CsNO3 Cl2 Cr
Chromium (II) chloride Chromium (III) sequioxide Chromium trioxide Cobalt
CrCl2 Cr2O3 CrO3 Co
Cobalt (II) chloride Copper Copper (II) chloride Copper (I) chloride
CoCl2 Cu CuCl2 CuCl
Copper(l) cyanide Copper (I) iodide Copper (II) oxide Copper (I) oxide
Cu2(CN)2 CuI CuO Cu2O
Heat of fusion
Melting point ˚C
cal/g
cal/g mole
–27.2
39.6
2060
–5.2 775 28.3
36.4 27.2 3.7
2240 2120 500
38.5
21.4
3600
406.8 –103±5
16.6 22.8
3250 1531
1890
62.1
3660
814 2279 197
65.9 27.6 37.7
7700 4200 3770
1490
62.1
3640
7390
727
56.9
1083
49.0
3110
430
24.7
4890
429
26.4
2620
473
(30.1)
(5400)
587 1446
(13.6) 35.4
(2600) 2820
1230
(93.6)
(l3400)
For heat of fusion in J/kg, multiply values in cal/g by 4184. For heat of fusion in J/mol, multiply values in cal/g-mol (=cal/mol) by 4.184. For melting point in K, add 273.15 to values in ˚C. Values in parentheses are of uncertain reliability. Source: data from Weast, R C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, (1974); and Bolz, R. E. and Tuve, G. L., Eds., Handbook of Tables for Applied Engineering Science, 2nd ed., CRC Press, Cleveland, (1973)
©2001 CRC Press LLC Shackelford & Alexander
243
6.3 Thermodynamics Page 244 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 73. HEAT OF
FUSION FOR ELEMENTS AND INORGANIC COMPOUNDS (SHEET 5 OF 16) Heat of fusion
Melting point ˚C
cal/g
cal/g mole
Compound
Formula
Copper (I) sulfide Dysprosium Erbium Europium
Cu2S Dy Er Eu
1129
62.3
5500
1407 1496 826
25.2 24.5 16.4
4100 4100 2500
Europium trichloride Fluorine Gadolinium Gallium
EuCl3 F2 Gd Ga
622 –219.6
(20.9) 6.4
(8000) 244.0
1312 29
23.8 19.1
3700 1336
Germanium Gold Hafnium Holmium
Ge Au Hf Ho
959 1063 2214 1461
(114.3) (15.3) (34.1) 24.8
(8300) 3030 (6000) 4100
Hydrogen Hydrogen bromide Hydrogen chloride Hydrogen fluoride
H2 HBr HCl HF
–259.25
13.8
28
–86.96 –114.3 83.11
7.1 13.0 54.7
575.1 476.0 1094
Hydrogen iodide Hydrogen nitrate
HI HNO3
–50.91
5.4
686.3
Hydrogen oxide (water)
H2O
Deuterium oxide
D2O
–47.2 0 3.78
9.5 79.72 75.8
601 1436 1516
For heat of fusion in J/kg, multiply values in cal/g by 4184. For heat of fusion in J/mol, multiply values in cal/g-mol (=cal/mol) by 4.184. For melting point in K, add 273.15 to values in ˚C. Values in parentheses are of uncertain reliability. Source: data from Weast, R C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, (1974); and Bolz, R. E. and Tuve, G. L., Eds., Handbook of Tables for Applied Engineering Science, 2nd ed., CRC Press, Cleveland, (1973)
©2001 CRC Press LLC
244
CRC Handbook of Materials Science & Engineering
6.3 Thermodynamics Page 245 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 73. HEAT OF
FUSION FOR ELEMENTS AND INORGANIC COMPOUNDS (SHEET 6 OF 16)
Compound
Formula
Hydrogen peroxide
H2O2
Hydrogen selenate
H2SeO4
Hydrogen sulfate
H2SO4
Hydrogen sulfide
H2S
Hydrogen sulfide, di–
H2S2
Hydrogen telluride Indium lodine
H2Te In I2
lodine chloride (α) lodine chloride (β) Iron Iron carbide Iron (III) chloride Iron (II) chloride Iron (II) oxide Iron oxide Iron pentacarbonyl Iron (II) sulfide Lanthanum Lead
Heat of fusion
Melting point ˚C
cal/g
cal/g mole
–0.7 57.8 10.4 –85.6
8.58 23.8 24.0 16.8
2920 3450 2360 5683
–89.7 –49.0
27.3 12.9
1805 1670
156.3
6.8
781
112.9
14.3
3650
ICl ICl
17.1 13.8
16.4 13.3
2660 2270
Fe Fe3C
1530.0
63.7
3560
1226.8
68.6
12330
Fe2Cl6 FeCl2 FeO Fe3O4
303.8 677
63.2 61.5
20500 7800
1380
(107.2)
(7700)
1596
142.5
33000
Fe(CO)5 FeS La Pb
–21.2
16.5
3250
1195 920 327.3
56.9 17.4 5.9
5000 2400 1224
For heat of fusion in J/kg, multiply values in cal/g by 4184. For heat of fusion in J/mol, multiply values in cal/g-mol (=cal/mol) by 4.184. For melting point in K, add 273.15 to values in ˚C. Values in parentheses are of uncertain reliability. Source: data from Weast, R C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, (1974); and Bolz, R. E. and Tuve, G. L., Eds., Handbook of Tables for Applied Engineering Science, 2nd ed., CRC Press, Cleveland, (1973)
©2001 CRC Press LLC Shackelford & Alexander
245
6.3 Thermodynamics Page 246 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 73. HEAT OF
FUSION FOR ELEMENTS AND INORGANIC COMPOUNDS (SHEET 7 OF 16) Heat of fusion
Compound
Formula
Melting point ˚C
Leadbromide Lead chloride Lead fluoride Lead iodide
PbBr2 PbCl2 PbF2 PbI2
487.8 497 8 823 412
11 7 20.3 7.6 17.9
4290 5650 1860 5970
Lead molybdate Lead oxide Lead sulfate Lead sulfide
PbMoO4 PbO PbSO4 PbS
1065
70.8
(25800)
890
12.6
2820
1087
31.6
9600
1114
17.3
4150
Lithium Lithium bromide Lithium chloride Lithium fluoride
Li LiBr LiCl LiF
178.8 552 614 896
158.5 33 4 75.5 (91.1)
1100 2900 3200 (2360)
Lithium hydroxide Lithium iodide Lithium metasilicate
LiOH LiI Li2SiO3
462 440
103.3 (10.6)
2480 (1420)
Lithium molybdate
Li2MoO4
1177 705
80.2 24.1
7210 4200
Lithium nitrate Lithium orthosilicate
LiNO3 Li4SiO4
Lithium sulfate
Li2SO4
Lithium tungstate
Li2WO4
250 1249 857 742
87.8 60.5 27.6 (25.6)
6060 7430 3040 (6700)
cal/g
cal/g mole
For heat of fusion in J/kg, multiply values in cal/g by 4184. For heat of fusion in J/mol, multiply values in cal/g-mol (=cal/mol) by 4.184. For melting point in K, add 273.15 to values in ˚C. Values in parentheses are of uncertain reliability. Source: data from Weast, R C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, (1974); and Bolz, R. E. and Tuve, G. L., Eds., Handbook of Tables for Applied Engineering Science, 2nd ed., CRC Press, Cleveland, (1973)
©2001 CRC Press LLC
246
CRC Handbook of Materials Science & Engineering
6.3 Thermodynamics Page 247 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 73. HEAT OF
FUSION FOR ELEMENTS AND INORGANIC COMPOUNDS (SHEET 8 OF 16) Heat of fusion
Melting point ˚C
cal/g
cal/g mole
Compound
Formula
Lutetium Magnesium Magnesium bromide Magnesium chloride
Lu Mg MgBr2 MgCl2
1651 650
26.3 88.9
4600 2160
711 712
45.0 82.9
8300 8100
Magnesium fluoride Magnesium oxide Magnesium silicate Magnesium sulfate
MgF2 MgO MgSiO3 MgSO4
1221
94.7
5900
2642
459.0
18500
1524 1327
146.4 28.9
14700 3500
Manganese Manganese dichloride Manganese metasilicate Manganese (II) oxide
Mn MnCl2 MnSiO3 MnO
1220
62.7
3450
650 1274
58.4 (62.6)
7340 (8200)
1784
183.3
13000
Manganese oxide Mercury Mercury bromide Mercury chloride
Mn3O4 Hg HgBr2 HgCl2
1590
(170.4)
(39000)
–39
2.7
557.2
241 276.8
10.9 15.3
3960 4150
Mercury iodide Mercury sulfate Molybdenum Molybdenum dichloride
HgI2 HgSO4 Mo MoCl2
250 850
9.9 (4.8)
4500 (1440)
2622
(68.4)
(6600)
726.8
3.58
6000
For heat of fusion in J/kg, multiply values in cal/g by 4184. For heat of fusion in J/mol, multiply values in cal/g-mol (=cal/mol) by 4.184. For melting point in K, add 273.15 to values in ˚C. Values in parentheses are of uncertain reliability. Source: data from Weast, R C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, (1974); and Bolz, R. E. and Tuve, G. L., Eds., Handbook of Tables for Applied Engineering Science, 2nd ed., CRC Press, Cleveland, (1973)
©2001 CRC Press LLC
Shackelford & Alexander
247
6.3 Thermodynamics Page 248 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 73. HEAT OF
FUSION FOR ELEMENTS AND INORGANIC COMPOUNDS (SHEET 9 OF 16)
Compound
Formula
Molybdenum hexafluoride Molybdenum trioxide Neodymium Neon
MoF6 MoO3 Nd Ne
Nickel Nickel chloride
Ni NiCl2
Nickel subsulfide Niobium
Ni3S2 Nb
Niobium pentachloride
NbCl5
Niobium pentoxide Nitric oxide Nitrogen
Nb2O5 NO N2
Nitrogen tetroxide
N2O4
Nitrous oxide Osmium Osmium tetroxide (white)
N 2O Os OsO4
Osmium tetroxide (yellow) Oxygen Palladium Phosphoric acid
OsO4 O2 Pd H3PO4
Heat of fusion
Melting point ˚C
cal/g
cal/g mole
17 795
11.9 (17.3)
2500 (2500)
1020 – 248.6
11.8 3.83
1700 77.4
1452
71.5
4200
1030 790
142 5 25.8 1
18470 5800
2496
(68.9)
(6500)
21.1 1511
30 8 91.0
8400 24200
–163.7
18.3
549.5
–210
6.15
172.3
–13.2 –90.9
60.2 35.5
5540 1563
2700
(36.7)
(7000)
41.8
9.2
2340
55.8 –218.8
15.5 3.3
4060 106.3
1555
38.6
4120
42.3
25.8
2520
For heat of fusion in J/kg, multiply values in cal/g by 4184. For heat of fusion in J/mol, multiply values in cal/g-mol (=cal/mol) by 4.184. For melting point in K, add 273.15 to values in ˚C. Values in parentheses are of uncertain reliability. Source: data from Weast, R C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, (1974); and Bolz, R. E. and Tuve, G. L., Eds., Handbook of Tables for Applied Engineering Science, 2nd ed., CRC Press, Cleveland, (1973)
©2001 CRC Press LLC
248
CRC Handbook of Materials Science & Engineering
6.3 Thermodynamics Page 249 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 73. HEAT OF
FUSION FOR ELEMENTS AND INORGANIC COMPOUNDS (SHEET 10 OF 16)
Compound
Formula
Phosphoric acid. hypo–
H4P2O6
Phosphorus acid, hypo–
H3PO2
Phosphorus acid, ortho– Phosphorus oxychloride
H3PO3 POCl3
Phosphorus pentoxide
P4O10
Phosphorus trioxide Phosphorus, yellow Platinum
P4O6 P4 Pt
Potassium Potassium borate, meta– Potassium bromide Potassium carbonate
K KBO2 KBr K2CO3
Potassium chloride Potassium chromate Potassium cyanide Potassium dichromate
KCl K2CrO4 KCN K2Cr2O7
Potassium fluoride Potassium hydroxide Potassium iodide Potassium nitrate
KF KOH Kl KNO3
Heat of fusion
Melting point ˚C
cal/g
cal/g mole
54.8 17.3 73.8 1.0
51.2 35.0 37.4 20.3
8300 2310 3070 3110
569.0 23.7 44.1
60.1 15.3 4.8
17080 3360 600
1770
24.1
4700
63.4
14.6
574
947
(69.1)
(5660)
742
42.0
5000
897
56.4
7800
770
85.9
6410
984
35.6
6920
623
(53.7)
(3500)
398
29.8
8770
875 360 682
111.9 (35.3) 24.7
6500 (1980) 4100
338
78.1
2840
For heat of fusion in J/kg, multiply values in cal/g by 4184. For heat of fusion in J/mol, multiply values in cal/g-mol (=cal/mol) by 4.184. For melting point in K, add 273.15 to values in ˚C. Values in parentheses are of uncertain reliability. Source: data from Weast, R C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, (1974); and Bolz, R. E. and Tuve, G. L., Eds., Handbook of Tables for Applied Engineering Science, 2nd ed., CRC Press, Cleveland, (1973)
©2001 CRC Press LLC
Shackelford & Alexander
249
6.3 Thermodynamics Page 250 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 73. HEAT OF
FUSION FOR ELEMENTS AND INORGANIC COMPOUNDS (SHEET 11 OF 16)
Compound
cal/g
cal/g mole
490 1340 1092 1074
55.3 41.9 42.4 46.4
6100 8900 14000 8100
179 931 3167±60
23.1 19.0 (42.4)
2250 2700 (7900)
296
30.1
15340
Formula
Potassium peroxide
K2O2
Potassium phosphate
K3PO4
Potassium pyro– phosphate
K4P2O7
Potassium sulfate
K2SO4
Potassium thiocyanate Praseodymium Rhenium Rhenium heptoxide
KSCN Pr Re Re2O7
Rhenium hexafluoride Rubidium Rubidium bromide Rubidium chloride
ReF6 Rb RbBr RbCl
Rubidium fluoride Rubidium iodide Rubidium nitrate Samarium
RbF Rbl RbNO3 Sm
Scandium Selenium Seleniumoxychloride
Sc Se SeOCl3
Silane, hexaHuoro–
Si2F6
Heat of fusion
Melting point ˚C
19.0
16.6
5000
38 .9 677 717
6. 1 22.4 36.4
525 3700 4400
833 638
39.5 14.0
4130 2990
305
9.1
1340
1072
17.3
2600
1538 217
84.4 15.4
3800 1220
9.8 –28.6
6.1 22.9
1010 3900
For heat of fusion in J/kg, multiply values in cal/g by 4184. For heat of fusion in J/mol, multiply values in cal/g-mol (=cal/mol) by 4.184. For melting point in K, add 273.15 to values in ˚C. Values in parentheses are of uncertain reliability. Source: data from Weast, R C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, (1974); and Bolz, R. E. and Tuve, G. L., Eds., Handbook of Tables for Applied Engineering Science, 2nd ed., CRC Press, Cleveland, (1973)
©2001 CRC Press LLC
250
CRC Handbook of Materials Science & Engineering
6.3 Thermodynamics Page 251 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 73. HEAT OF
FUSION FOR ELEMENTS AND INORGANIC COMPOUNDS (SHEET 12 OF 16)
Compound
Heat of fusion
Formula
Melting point ˚C
cal/g
cal/g mole
Silicon Silicon dioxide (Cristobalite) Silicon tetrachloride Silver
Si
1427
337.0
9470
SiO2
1723
35.0
2100
SiCl4 Ag
–67.7
10.8
1845
961
25.0
2700
Silver bromide Silver chloride Silver cyanide Silver iodide
AgBr AgCl AgCN AgI
430 455 350 557
11.6 22.0 20.5 9.5
2180 3155 2750 2250
Silver nitrate
AgNO3
209 657 841
16.2 (13.7) 13.5
2755 (4280) 3360
97.8
27.4
630
8660
Silver sulfate
Ag2SO4
Silver sulfide Sodium
Ag2S Na
Sodium borate, meta– Sodium bromide Sodium carbonate
966
134.6
747
59.7
6140
Sodium chlorate
NaBO2 NaBr Na2CO3 NaClO3
854 255
66.0 49.7
7000 5290
Sodium chloride Sodium cyanide Sodium fluoride Sodium hydroxide
NaCl NaCN NaF NaOH
800 562 992 322
123.5 (88.9) 166.7 50.0
7220 (4360) 7000 2000
For heat of fusion in J/kg, multiply values in cal/g by 4184. For heat of fusion in J/mol, multiply values in cal/g-mol (=cal/mol) by 4.184. For melting point in K, add 273.15 to values in ˚C. Values in parentheses are of uncertain reliability. Source: data from Weast, R C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, (1974); and Bolz, R. E. and Tuve, G. L., Eds., Handbook of Tables for Applied Engineering Science, 2nd ed., CRC Press, Cleveland, (1973)
©2001 CRC Press LLC Shackelford & Alexander
251
6.3 Thermodynamics Page 252 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 73. HEAT OF
FUSION FOR ELEMENTS AND INORGANIC COMPOUNDS (SHEET 13 OF 16)
Compound
Formula
Sodium iodide Sodium molybdate Sodium nitrate Sodium peroxide
NaI Na2MoO4 NaNO3
Sodium phosphate, meta– Sodium pyrophosphate
NaPO3 Na4P2O7
Sodiumsilicate,aluminum–
NaAlSi3O8
Sodium silicate, di–
Na2Si2O5
Sodium silicate, meta–
Na2SiO3
Na2O2
Melting point ˚C
Heat of fusion cal/g
cal/g mole
662
35.1
5340
687 310 460
17.5 44.2 75.1
3600 3760 5860
988 970 1107 884
(48.6) (51.5) 50.1 46.4
(4960) (13700) 13150 8460
1087 884 920
84.4 41.0 15.4
10300 5830 (1200)
323
54.8
4450
5800
Sodium sulfate
Na2SO4
Sodium sulfide Sodium thiocyanate
Na2S NaSCN
Sodium tungstate Strontium Strontium bromide Strontium chloride
Na2WO4 Sr SrBr2 SrCl2
702
19.6
757
25.0
2190
643 872
19.3 26.5
4780 4100
Strontium fluoride Strontium oxide Sulfur (monatomic) Sulfur dioxide
SrF2 SrO S SO2
1400
34.0
4260
2430 119
161.2 9.2
16700 295
–73.2
32.2
2060
For heat of fusion in J/kg, multiply values in cal/g by 4184. For heat of fusion in J/mol, multiply values in cal/g-mol (=cal/mol) by 4.184. For melting point in K, add 273.15 to values in ˚C. Values in parentheses are of uncertain reliability. Source: data from Weast, R C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, (1974); and Bolz, R. E. and Tuve, G. L., Eds., Handbook of Tables for Applied Engineering Science, 2nd ed., CRC Press, Cleveland, (1973)
©2001 CRC Press LLC
252
CRC Handbook of Materials Science & Engineering
6.3 Thermodynamics Page 253 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 73. HEAT OF
FUSION FOR ELEMENTS AND INORGANIC COMPOUNDS (SHEET 14 OF 16) Heat of fusion
Compound
Formula
Melting point ˚C
Sulfur trioxide (α)
SO3 SO3 SO3
16.8 32.3 62.1
25.8 36.1 79.0
2060 2890 6310
Ta
2996 ± 50
34.6–41.5
(7500)
TaCl5
206.8 1877
25.1 108.6
9000 48000
453 1356
25.3 24.6
3230 3900
302.4 460
5.0 21.0
1030 5990
273
9.5
4400
427
17.7
4260
Sulfur trioxide (β) Sulfur trioxide (γ) Tantalum Tantalum pentachloride Tantalum pentoxide Tellurium Terbium
Ta2O5 Te Tb
Thallium Thallium bromide, mono– Thallium carbonate Thallium chloride, mono–
Tl TlBr Tl2CO3 TICl
Thallium iodide, mono– Thallium nitrate
TlI TINO3
Thallium sulfate
Tl2SO4
Thallium sulfide
Tl2S
Thorium Thorium chloride Thorium dioxide Thulium
Th ThCl4 ThO2 Tm
cal/g
cal/g mole
440
9.4
3125
207 632 449
8.6 10.9 6.8
2290 5500 3000
1845
(<19.8)
(<4600)
765 2952
61.6 1102.0
22500 291100
1545
26.0
4400
For heat of fusion in J/kg, multiply values in cal/g by 4184. For heat of fusion in J/mol, multiply values in cal/g-mol (=cal/mol) by 4.184. For melting point in K, add 273.15 to values in ˚C. Values in parentheses are of uncertain reliability. Source: data from Weast, R C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, (1974); and Bolz, R. E. and Tuve, G. L., Eds., Handbook of Tables for Applied Engineering Science, 2nd ed., CRC Press, Cleveland, (1973)
©2001 CRC Press LLC
Shackelford & Alexander
253
6.3 Thermodynamics Page 254 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 73. HEAT OF
FUSION FOR ELEMENTS AND INORGANIC COMPOUNDS (SHEET 15 OF 16) Heat of fusion
Compound
Formula
Melting point ˚C
Tin Tin bromide, di– Tin bromide, tetra– Tin chloride, di–
Sn SnBr2 SnBr4 SnCl2
231.7
14.4
1720
231.8 29.8 247
(6.1) 6.8 16.0
(1720) 3000 3050
Tin chloride,tetra– Tin iodide, tetra– Tin oxide Titanium
SnCl4 SnI4 SnO Ti
–33.3 143.4
8.4 (6.9)
2190 (4330)
1042 1800
(46.8) (104.4)
(6400) (5000)
Titanium bromide, tetra– Titanium chloride, tetra– Titanium dioxide Titanium oxide
TiBr4 TiCl4 TiO2 TiO
38 –23.2 1825
(5.6) 11.9 (142.7)
(2060) 2240 (11400)
991
219
14000
Tungsten Tungsten dioxide Tungsten hexafluoride Tungsten tetrachloride
W WO2 WF6 WCl4
Tungsten trioxide
WO3
Uranium235
U
Uranium tetrachloride Vanadium
UCl4 V
cal/g
cal/g mole
3387
(45.8)
(8420)
1270 –0.5 327
60 1 6.0 18.4
13940 1800 6000
1470 ~1133 590
60 1 20 27.1
13940 3700 10300
1917
(70)
(4200)
For heat of fusion in J/kg, multiply values in cal/g by 4184. For heat of fusion in J/mol, multiply values in cal/g-mol (=cal/mol) by 4.184. For melting point in K, add 273.15 to values in ˚C. Values in parentheses are of uncertain reliability. Source: data from Weast, R C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, (1974); and Bolz, R. E. and Tuve, G. L., Eds., Handbook of Tables for Applied Engineering Science, 2nd ed., CRC Press, Cleveland, (1973)
©2001 CRC Press LLC
254
CRC Handbook of Materials Science & Engineering
6.3 Thermodynamics Page 255 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 73. HEAT OF
FUSION FOR ELEMENTS AND INORGANIC COMPOUNDS (SHEET 16 OF 16) Melting point ˚C
Compound
Formula
Vanadium dichloride Vanadium oxide Vanadium pentoxide Xenon
VCl2 VO V2O5 Xe
Ytterbium Yttrium Yttrium oxide Zinc
Yb Y Y2O3 Zn
Zinc chloride Zinc oxide Zinc sulfide Zirconium
ZnCl2 ZnO ZnS Zr
Zirconium dichloride Zirconium oxide
ZrCl2 ZrO2
727 2715
Heat of fusion cal/g
cal/g mole
1027
65.6
8000
2077
224.0
15000
670
85.5
15560
–111.6
5.6
740
823 1504
12.7 46.1
2200 4100
2227
110.7
25000
419.4
24.4
1595
283
(406)
(5540)
1975 1745 1857
54.9 (93.3) (60)
4470 (9100) (5500)
45.0 168.8
7300 20800
For heat of fusion in J/kg, multiply values in cal/g by 4184. For heat of fusion in J/mol, multiply values in cal/g-mol (=cal/mol) by 4.184. For melting point in K, add 273.15 to values in ˚C. Values in parentheses are of uncertain reliability. Source: data from Weast, R C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, (1974); and Bolz, R. E. and Tuve, G. L., Eds., Handbook of Tables for Applied Engineering Science, 2nd ed., CRC Press, Cleveland, (1973)
©2001 CRC Press LLC Shackelford & Alexander
255
6.3 Thermodynamics Page 256 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 74. HEATS OF
SUBLIMATION OF METALS AND THEIR OXIDES
Metal
kcal/mole (25˚C)
kJ/mole (25˚C)
Al Cu Fe Mg
78 81 100 113
326 338 416 473
122 145 143
509 605 597
153
639
Metal Oxide FeO MgO α-TiO TiO2 (rutile)
Data from: JANAF Thermochemical Tables, 2nd ed., National Standard Reference Data Series, Natl. Bur. Std. (U.S.), 37 (1971) and Supplement in J. Phys. Chem. Ref. Data 4(1), 1175 (1975).
©2001 CRC Press LLC
256
CRC Handbook of Materials Science & Engineering
Table 75. KEY TO
TABLES OF THERMODYNAMIC COEFFICIENTS (SHEET 1 OF 4)
Thermodynamic calculations over a wide range of temperatures are generally made with the aid of algebraic equations representing the characteristic properties of the substances being considered. The necessary integrations and differentiations, or other mathematical manipulations, are then most easily effected. The most convenient starting point in making such calculations for a given substance is the heat capacity at constant pressure. From this quantity and a knowledge of the properties of any phase transitions, the other thermodynamic properties may be computed by the well-known equations given in standard texts on thermodynamics. Please note that the units for a, b, c, and d are cal/g mole, whereas those for A are kcal/g mole. The necessary adjustment must be made when the data are substituted into the equations. Empirical heat capacity equations are generated in the form of a power series, with the absolute temperature T as the independent variable:
Since both forms are used in the following, let
©2001 CRC Press LLC
Table 75. KEY TO
TABLES OF THERMODYNAMIC COEFFICIENTS (SHEET 2 OF 4)
The constants a, b, c, and d are to be determined either experimentally or by some theoretical or semi-empirical approach. The heat content, or enthalpy (H), is determined from the heat capacity by a simple integration of the range of temperatures for which the formula for cp is valid. Thus, if 298K is taken as a reference temperature,
where all the constants on the right-hand side of the equation have been incorporated in the term –A. In general, the enthalpy is given by a sum of terms for each phase of the substance involved in the temperature range considered plus terms that represent the heats of transitions:
In a similar manner, the entropy S is obtained by performing the integration
©2001 CRC Press LLC
Table 75. KEY TO
TABLES OF THERMODYNAMIC COEFFICIENTS (SHEET 3 OF 4)
where
From the definition of free energy (F):
the quantity
©2001 CRC Press LLC
Table 75. KEY TO
TABLES OF THERMODYNAMIC COEFFICIENTS (SHEET 4 OF 4)
may be written as:
and also the free energy function
Values of these thermodynamic coefficients are given in the following tables. The first column in each table lists the material. The second column gives the phase to which the coefficients are applicable. The remaining columns list the values of the constants a, b, c, d, A, and B required in the thermodynamic equations. All values that represent estimates are enclosed in parentheses. The heat capacities at temperatures beyond the range of experimental determination were estimated by extrapolation. Where no experimental values were found, analogy with compounds of neighboring elements in the periodic table was used.
©2001 CRC Press LLC
Table 76. THERMODYNAMIC
COEFFICIENTS FOR SELECTED ELEMENTS * (SHEET 1 OF 14)
Element
Phase
a –
b –
c (cal • g mole-1 )
–
(kcal • g mole-1)
(e.u.)
Ac
solid liquid
(5.4) (8)
(3.0) –
– –
– –
(1.743) (0.295)
(18.7) (31.3)
Ag
solid liquid gas
5.09 7.30 (4.97)
1.02 – –
– – –
0.36 – –
1.488 0.164 (–66.34)
19.21 30.12 (–12.52)
Al
solid liquid
4.94 7.0
2.96 –
– –
– –
1.604 0.33
22.26 30.83
Am
solid liquid
(4.9) (8.5)
(4.4) –
– –
– –
(1.657) (0.409)
(16.2) (34.5)
As
solid
5.17
2.34
–
–
1.646
21.8
Au
solid liquid
6.14 7.00
–0.175 –
0.92 –
– –
1.831 –0.631
23.65 26.99
B
solid liquid
1.54 (6.0)
4.40 –
– –
– –
0.655 (–4.599)
8.67 (31.4)
d
A
Source: data from Weast, R. C. Ed., Handbook of Chemistry and Physics, 69th ed., CRC Press, Boca Raton, Fla., 1988, D44.
©2001 CRC Press LLC
B
Table 76. THERMODYNAMIC
COEFFICIENTS FOR SELECTED ELEMENTS * (SHEET 2 OF 14)
a –
b –
c (cal • g mole-1 )
–
(kcal • g mole-1)
(e.u.)
5.55 5.55
4.50 1.50
– –
– –
1.722 1.582
16.1 15.9
(7.4) (497)
– –
– –
– –
(0.843) (–39.65)
(25.3) (–11.7)
solid liquid
5.07 5.27
1.21 –
– –
–1.15 –
1.951 –1.611
27.62 25.68
Bi
solid liquid gas
5.38 7.60 (4.97)
2.60 – –
– – –
– – –
1.720 –0.087 (–46.19)
17.8 25.6 (–15.9)
C
solid
4.10
1.02
–
–2.10
1.972
23.484
Ca
solid, α solid, β liquid gas
5.24 6.29
3.50 1.40
– –
– –
1.718 1.689
2095 26.01
7.4 (4.97)
– –
– –
– –
–0.147 (–43.015)
30.28 (–9.88)
Element
Phase
Ba
solid, α solid, β liquid gas
Be
d
A
Source: data from Weast, R. C. Ed., Handbook of Chemistry and Physics, 69th ed., CRC Press, Boca Raton, Fla., 1988, D44.
©2001 CRC Press LLC
B
Table 76. THERMODYNAMIC
COEFFICIENTS FOR SELECTED ELEMENTS * (SHEET 3 OF 14)
Element
Phase
a –
b –
c (cal • g mole-1 )
–
(kcal • g mole-1)
(e.u.)
Cd
solid liquid gas
5.31 7.10 (4.97)
2.94 – –
– – –
– – –
1.714 0.798 (–25.28)
18.8 26.1 (–11.7)
Ce
solid liquid
4.40 (7.9)
6.0 –
– –
– –
1.579 (–0.148)
13.1 (29.1)
Cl2
gas
8.76
0.27
–
–0.65
2.845
–2.929
Co
solid, α solid, β solid, γ liquid
4.72 3.30 9.60
4.30 5.86 –
– – –
– – –
1.598 0.974 3.961
21.4 3.1 50.5
8.30
–
–
–
–2.034
38.7
solid liquid gas
5.35 9.40 (4.97)
2.36 – –
– – –
–0.44 – –
1.848 1.556 (–82.47)
25.75 50.13 (–13.8)
Cr
d
A
Source: data from Weast, R. C. Ed., Handbook of Chemistry and Physics, 69th ed., CRC Press, Boca Raton, Fla., 1988, D44.
©2001 CRC Press LLC
B
Table 76. THERMODYNAMIC
COEFFICIENTS FOR SELECTED ELEMENTS * (SHEET 4 OF 14)
Element
Phase
a –
b –
c (cal • g mole-1 )
–
(kcal • g mole-1)
(e.u.)
Cs
solid liquid gas
7.42 8.00 (4.97)
– – –
– – –
– – –
2.212 1.887 (–17.35)
22.5 24.1 (–13.6)
Cu
solid liquid
5.41 7.50
1.50 –
– –
– –
1.680 0.024
23.30 34.05
F2
gas
8.29
0.44
–
–0.80
2.760
–0.76
Fe
solid, α solid, β solid, γ solid, δ liquid
3.37 10.40 4.85 10.30
7.10 – 3.00 –
– – – –
0.43 – – –
1.176 4.281 0.396 4.382
14.59 55.66 19.76 55.11
10.00
–
–
–
–0.021
50.73
solid liquid
5.237 (6.645)
3.33 –
– –
– –
1.710 (0.648)
21.01 (23.64)
Ga
d
A
Source: data from Weast, R. C. Ed., Handbook of Chemistry and Physics, 69th ed., CRC Press, Boca Raton, Fla., 1988, D44.
©2001 CRC Press LLC
B
Table 76. THERMODYNAMIC
COEFFICIENTS FOR SELECTED ELEMENTS * (SHEET 5 OF 14)
Element
Phase
a –
b –
c (cal • g mole-1 )
–
(kcal • g mole-1)
(e.u.)
Ge
solid liquid
5.90 (7.3)
1.13 –
– –
– –
1.764 (–5.668)
23.8 (25.7)
H2
gas
6.62
0.81
–
–
2.010
6.75
Hf
solid
(6.00)
(0.52)
–
–
(1.812)
(21.2)
Hg
liquid gas
6.61 4.969
– –
– –
– –
1.971 –13.048
19.20 –13.54
In
solid liquid gas
5.81 7.50 (4.97)
2.50 – –
– – –
– – –
1.844 1.564 (–58.42)
19.97 27.34 (–14.46)
Ir
solid
5.56
1.42
–
–
1.721
23.4
K
solid liquid gas
1.3264 8.8825 (4.97)
19.405 4.565 –
– 2.9369 –
– – –
1.258 1.923 (–19.689)
–1.86 32.55 (–9.46)
d
A
Source: data from Weast, R. C. Ed., Handbook of Chemistry and Physics, 69th ed., CRC Press, Boca Raton, Fla., 1988, D44.
©2001 CRC Press LLC
B
Table 76. THERMODYNAMIC
COEFFICIENTS FOR SELECTED ELEMENTS * (SHEET 6 OF 14)
Element
Phase
a –
b –
c (cal • g mole-1 )
–
(kcal • g mole-1)
(e.u.)
La
solid liquid
6.17 (7.3)
1.60 –
– –
– –
1.911 (–0.15)
21.9 (26.0)
Li
solid liquid gas
3.05 7.0 (4.97)
8.60 – –
– – –
– – –
1.292 1.509 (–34.30)
12.92 32.00 (–2.84)
Mg
solid liquid gas
5.33 (8.0) (4.97)
2.45 – –
– – –
–0.103 – –
1.733 0.942 (–34.78)
23.39 36.967 (–7.60)
Mn
solid, α solid, β solid, γ solid, δ liquid gas
6.70 8.33 10.70 11.30
3.38 0.66 – –
– – – –
–0.37 – – –
1.974 2.672 4.760 5.176
26.11 41.02 56.84 60.88
11.00 6.26
– –
–
–
1.221 –63.704
56.38 –3.13
solid
5.48
1.30
–
–
1.692
24.78
Mo
d
A
Source: data from Weast, R. C. Ed., Handbook of Chemistry and Physics, 69th ed., CRC Press, Boca Raton, Fla., 1988, D44.
©2001 CRC Press LLC
B
Table 76. THERMODYNAMIC
COEFFICIENTS FOR SELECTED ELEMENTS * (SHEET 7 OF 14)
Element
Phase
a –
b –
c (cal • g mole-1 )
–
(kcal • g mole-1)
(e.u.)
N2
gas
6.76
0.606
0.13
–
2.044
–7.064
Na
solid liquid
5.657 8.954 (4.97)
3.252 –4.577 –
0.5785 2.540 –
– – –
1.836 1.924 (–24.40)
20.92 36.0 (–8.7)
Nb
solid
5.66
0.96
–
–
1.730
24.24
Nd
solid liquid
5.61 (9.1)
5.34 –
– –
– –
1.910 (–0.606)
19.7 35.8
Ni
solid α solid β liquid
4.06 6.00
7.04 1.80
– –
– –
1.523 1.619
18.095 27.16
9.20
–
–
–
0.251
45.47
Np
solid liquid
(5.3) (9.0)
(3.4) –
– –
– –
(1.731) (1.392)
(17.9) (37.5)
O2
gas
8.27
0.258
–
–1.877
3.007
–0.750
d
A
Source: data from Weast, R. C. Ed., Handbook of Chemistry and Physics, 69th ed., CRC Press, Boca Raton, Fla., 1988, D44.
©2001 CRC Press LLC
B
Table 76. THERMODYNAMIC
COEFFICIENTS FOR SELECTED ELEMENTS * (SHEET 8 OF 14)
Element
Phase
a –
b –
c (cal • g mole-1 )
–
(kcal • g mole-1)
(e.u.)
Os
solid
5.69
0.88
–
–
1.736
24.9
P4
solid, white
13.62
28.72
–
–
5.338
43.8
liquid gas
19.23 (19.5)
0.51 (–0.4)
– (1.3)
–2.98 –
6.035 (–6.32)
66.7 (46.1)
Pa
solid liquid
(5.2) (8.0)
(4.0) –
– –
– –
(1.728) (–3.823)
(17.3) (28.8)
Pb
solid liquid gas
5.64 7.75 (4.97)
2.30 –0.73 –
– – –
– – –
1.784 1.362 (–45.25)
17.33 27.11 (–13.6)
Pd
solid liquid
5.80 (9.0)
1.38 –
– –
– –
1.791 (1.215)
24.6 (43.8)
Po
solid liquid gas
(5.2) (9.0) (4.97)
(3.2) – –
– – –
– – –
(1.693) (0.847) (–28.73)
(17.6) (35.2) (–13.5)
d
A
Source: data from Weast, R. C. Ed., Handbook of Chemistry and Physics, 69th ed., CRC Press, Boca Raton, Fla., 1988, D44.
©2001 CRC Press LLC
B
Table 76. THERMODYNAMIC
COEFFICIENTS FOR SELECTED ELEMENTS * (SHEET 9 OF 14)
Element
Phase
a –
b –
c (cal • g mole-1 )
–
(kcal • g mole-1)
(e.u.)
Pr
solid liquid
(5.0) (8.0)
(4.6) –
– –
– –
(1.705) (–0.519)
(16.4) (30.0)
Pt
solid liquid
5.74 (9.0)
1.34 –
– –
0.10 –
1.737 (0.406)
23.0 (42.6)
Pu
solid liquid
(5.2) (8.0)
(3.6) –
– –
– –
(1.710) (0.506)
(17.7) (31.0)
Ra
solid liquid gas
(5.8) (8.0) (4.97)
(1.2) – –
– – –
– – –
(1.783) (1.284) (–38.87)
(16.4) (28.6) (–14.5)
Rb
solid liquid gas
3.27 7.85 (4.97)
13.1 – –
– – –
– – –
1.557 1.814 (–19.04)
5.9 26.5 (–12.3)
Re
solid
(5.85)
(0.8)
–
–
(1.780)
(24.7)
d
A
Source: data from Weast, R. C. Ed., Handbook of Chemistry and Physics, 69th ed., CRC Press, Boca Raton, Fla., 1988, D44.
©2001 CRC Press LLC
B
Table 76. THERMODYNAMIC
COEFFICIENTS FOR SELECTED ELEMENTS * (SHEET 10 OF 14)
Element
Phase
a –
b –
c (cal • g mole-1 )
–
(kcal • g mole-1)
(e.u.)
Rh
solid liquid
5.40 (9.0)
2.19 –
– –
– –
1.707 (–0.923)
23.8 (44.4)
Ru
solid, α solid, β solid, γ solid, δ
5.25 7.20 7.20 7.50
1.50 – – –
– – – –
– – – –
1.632 2.867 2.867 3.169
23.5 35.5 35.5 37.6
S
solid, α solid, β liquid
3.58 3.56
6.24 6.95
– –
– –
1.345 1.298
14.64 14.54
5.4
5.0
–
–
1.576
24.02
/2 S2
gas
(4.25)
(0.15)
–
(–1.0)
(–2.859)
(9.57)
Sb
solid, α, β, γ liquid
5.51
1.74
–
–
1.720
21.4
7.50
–
–
–
1.992
28.1
gas
4.47
–
–
–0.11
–53.876
–21.7
1
1/2 Sb2
d
A
Source: data from Weast, R. C. Ed., Handbook of Chemistry and Physics, 69th ed., CRC Press, Boca Raton, Fla., 1988, D44.
©2001 CRC Press LLC
B
Table 76. THERMODYNAMIC
COEFFICIENTS FOR SELECTED ELEMENTS * (SHEET 11 OF 14)
Element
Phase
a –
b –
c (cal • g mole-1 )
–
(kcal • g mole-1)
(e.u.)
Sc
solid liquid
(5.13) (7.50)
(3.0) –
–
–
1.663 (–2.563)
21.1 31.3
Se
solid liquid
3.30 7.0
8.80 –
– –
– –
1.375 0.881
11.28 27.34
Si
solid liquid
5.70 7.4
1.02 –
–
–1.06
2.100 7.646
28.88 33.17
Sm
solid liquid
(6.7) (9.0)
(3.4) –
– –
– –
(2.149) (–2.296)
(24.2) (33.4)
Sn
solid, α, β liquid gas
4.42
6.30
–
–
1.598
14.8
7.30 (4.97)
– –
– –
– –
0.559 60.21)
26.2 (–14.3)
solid liquid gas
(5.60) (7.7) (4.97)
(1.37) – –
– – –
– – –
(1.731) (0.976) (37.16)
(19.3) (30.4) (–10.2)
Sr
d
A
Source: data from Weast, R. C. Ed., Handbook of Chemistry and Physics, 69th ed., CRC Press, Boca Raton, Fla., 1988, D44.
©2001 CRC Press LLC
B
Table 76. THERMODYNAMIC
COEFFICIENTS FOR SELECTED ELEMENTS * (SHEET 12 OF 14)
Element
Phase
a –
b –
c (cal • g mole-1 )
–
(kcal • g mole-1)
(e.u.)
Ta
solid
5.82
0.78
–
–
1.770
23.4
Tc
solid liquid
(5.6) –
(2.0) –
– –
– –
(1.759) (3.459)
(24.5) (59.4)
Te
solid, α solid, β liquid
4.58 4.58
5.25 5.25
– –
– –
1.599 1.469
15.78 15.57
9.0
–
–
–
–0.988
34.96
/2 Te2
gas
4.47
–
–
–0.10
–19.048
–6.47
Th
solid liquid
8.2 (8.0)
–0.77 –
2.04 –
– –
2.591 (–7.602)
33.64 (26.84)
Ti
solid, α solid, β liquid
5.25 7.50
2.52 –
– –
– –
1.677 1.645
23.33 35.46
(7.8)
–
–
–
(–2.355)
(35.45)
1
d
A
Source: data from Weast, R. C. Ed., Handbook of Chemistry and Physics, 69th ed., CRC Press, Boca Raton, Fla., 1988, D44.
©2001 CRC Press LLC
B
Table 76. THERMODYNAMIC
COEFFICIENTS FOR SELECTED ELEMENTS * (SHEET 13 OF 14)
Element
Phase
Tl
solid, α solid, β liquid gas
a –
b –
c (cal • g mole-1 )
–
(kcal • g mole-1)
(e.u.)
5.26 7.30
3.46 –
– –
– –
1.722 2.230
15.6 26.4
7.50 (4.97)
– –
– –
– –
1.315 (–41.88)
25.9 (–15.4)
d
A
B
solid, α solid, β solid, γ liquid
3.25 10.28 9.12
8.15 – –
– – –
0.80 – –
1.063 3.493 1.110
8.47 48.27 39.09
(8.99)
–
–
–
(–2.073)
36.01
V
solid liquid
5.57 (8.6)
0.97 –
– –
– –
1.704 1.827
24.97 44.06
W
solid
5.74
0.76
–
–
1.745
24.9
Y
solid liquid
(5.6) (7.5)
(2.2) –
– –
– –
(1.767) 2.277)
(21.6) (29.6)
U
Source: data from Weast, R. C. Ed., Handbook of Chemistry and Physics, 69th ed., CRC Press, Boca Raton, Fla., 1988, D44.
©2001 CRC Press LLC
Table 76. THERMODYNAMIC
COEFFICIENTS FOR SELECTED ELEMENTS * (SHEET 14 OF 14)
a –
b –
c (cal • g mole-1 )
–
(kcal • g mole-1)
(e.u.)
solid liquid
5.35 7.50 (4.97)
2.40 – –
– – –
– – –
1.702 1.020 (–29.407)
21.25 31.35 (–9.81)
solid, α solid, β liquid
6.83 7.27
1.12 –
– –
–0.87 –
2.378 1.159
30.45 31.43
(8.0)
–
–
–
(–2.190)
(34.7)
Element
Phase
Zn
Zr
d
A
Source: data from Weast, R. C. Ed., Handbook of Chemistry and Physics, 69th ed., CRC Press, Boca Raton, Fla., 1988, D44. *
Please refer to Table 75, ”Key to Tables of Thermodynamic Coefficients” on page 257 for an explanation of the coefficients.
©2001 CRC Press LLC
B
Table 77. THERMODYNAMIC COEFFICIENTS FOR (SHEET 1 OF 23)
OXIDES
Oxide
Phase
a –
b (cal • g mole-1 )
c –
–
(kcal • g mole-1)
(e.u.)
Ac2O3
Solid Liquid
(20.0) (40)
(20.4) –
– –
– –
(6.870) (–19.767)
(80.9) (180.5)
Ag2O
Solid
13.26
7.04
–
–
4.266
48.56
Ag2O2
Solid
(16.4)
(12.2)
–
–
(5.432)
(76.7)
Al2O3
Solid Liquid
26.12 (33)
4.388 –
– –
–7.269 –
10.422 (– 11.655)
142.03 (174.1)
Am2O3
Solid Liquid Solid
(20.0) (38.5) (14.0)
(15.6) – (6.8)
– – –
– – –
(6.657) (–7.796) (4.477)
(81.6) (181.8) (61.8)
AmO2
d
A
For discussion of these coefficients, please see Table 75, Key to Tables of Thermodynamic Coefficients on page 257 Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
B
Table 77. THERMODYNAMIC COEFFICIENTS FOR (SHEET 2 OF 23)
OXIDES
Oxide
Phase
a –
b (cal • g mole-1 )
c –
–
(kcal • g mole-1)
(e.u.)
As2O3
Solid, α Solid, β Liquid Gas
8.37 8.37 (39) (21.5)
48.6 48.6 – –
– – – –
– – – –
4.656 0.556 (5.760) (–14.164)
36.6 28.4 (187.6) (62.5)
AsO2 As2O5
Solid Liquid Solid
(8.5) (21) (31.1)
(9.4) – (16.4)
– – –
– – (–5.4)
(2.952) (2.184) (11.813)
(38.2) (108.0) (159.9)
Au2O3
Solid
(23.5)
(4.8)
–
–
(7.220)
(105.3)
B2O3
Solid Liquid
8.73 30.50
25.40 –
– –
–1.31 –
4.171 7.822
45.04 161.59
Ba2O
Solid Liquid Gas
(20.0) (22) (15)
(2.2) – –
– – –
– – –
(6.061) (1.769) (–25.51)
(91.1) (96.8) (29.0)
d
A
For discussion of these coefficients, please see Table 75, Key to Tables of Thermodynamic Coefficients on page 257 Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
B
Table 77. THERMODYNAMIC COEFFICIENTS FOR (SHEET 3 OF 23)
OXIDES
Oxide
Phase
a –
b (cal • g mole-1 )
c –
–
(kcal • g mole-1)
(e.u.)
BaO
Solid Liquid Solid Liquid
12.74 (13.9) (13.6) (21)
1.040 – (2.0) –
– – – –
–1.984 – – –
4.510 (–9.341) (4.144) (3.241)
57.2 (57.5) (59.6) (99.0)
BeO
Solid
8.69
3.65
–
–3.13
3.803
48.99
BiO
Solid Liquid Gas Solid Liquid
(9.7) (14) (8.9) 23.27 (35.7)
(3.0) – – 11.05 –
– – – – –
– – – – –
(3.025) (2.306) (–61.49) 7.429 (7.614)
(41.2) (64.9) (–1.8) 99.7 (168.3)
CO
Gas
6.60
1.2
–
–
2.021
–9.34
CO2
Gas
7.70
5.3
–0.83
–
2.490
–5.64
CaO
Solid
10.00
4.84
–
–1.08
3.559
49.5
BaO2
Bi2O3
d
A
For discussion of these coefficients, please see Table 75, Key to Tables of Thermodynamic Coefficients on page 257 Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
B
Table 77. THERMODYNAMIC COEFFICIENTS FOR (SHEET 4 OF 23)
OXIDES
Oxide
Phase
a –
b (cal • g mole-1 )
c –
–
(kcal • g mole-1)
(e.u.)
CdO
Solid
9.65
2.08
–
–
2.970
42.5
Ce2O3
Solid Liquid Solid
(–23.0) (37) 15.0
(9.0) – 2.5
– – –
– – –
(7.258) (–2.591) 4.579
(100.2) (178.5) 68.5
Co3O4
Solid Liquid Solid
(9.8) (15.5) (29.5)
(2.2) – (17.0)
– – –
– – –
(3.020) (–1.886) (9.551)
(46.0) (79.2) (137.6)
Cr2O3
Solid
28.53
2.20
–
–3.736
9.857
145.9
CrO2
Solid
(16.1)
(3.0)
–
(–3.0)
(5.946)
(82.8)
CrO3
Solid Liquid Gas
(18.1) (27) (20)
(4.0) – –
– – –
(–2.0) – –
(6.245) (3.381) (–28.62)
(87.9) (127.0) (53.6)
CeO2 CoO
d
A
For discussion of these coefficients, please see Table 75, Key to Tables of Thermodynamic Coefficients on page 257 Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
B
Table 77. THERMODYNAMIC COEFFICIENTS FOR (SHEET 5 OF 23)
OXIDES
Oxide
Phase
a –
b (cal • g mole-1 )
c –
–
(kcal • g mole-1)
(e.u.)
Cs2O
Solid Liquid Solid Liquid
(16.51) (22) (21.4) (29.5)
(5.4) – (11.4) –
– – – –
– – – –
(5.160) (3.205) (6.887) (4.125)
(72.6) (99.0) (85.3) (123.8)
Cs2O3
Solid Liquid
(24.0) (35)
(22.6) –
– –
– –
(8.160) (2.148)
(96.5) (142.2)
Cu2O
Solid Liquid Solid Liquid
(13.4) (21.5) 14.34 (22)
(8.6) – 6.2 –
– – – –
– – – –
(4.378) (3.721) 4.551 (–4.339)
(96.0) (54.9) 61.11 (98.91)
Solid Liquid Solid, α Solid, β
9.27 (14.5) 12.38 (14.5)
4.80 – 1.62 –
– – – –
– – –0.38 –
(2.977) (–3.721) 3.826 (–2.399)
(43.8) (69.2) 58.3 (66.7)
Cs2O2
CuO
FeO Fe3O4
d
A
For discussion of these coefficients, please see Table 75, Key to Tables of Thermodynamic Coefficients on page 257 Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
B
Table 77. THERMODYNAMIC COEFFICIENTS FOR (SHEET 6 OF 23)
OXIDES
Oxide
Phase
a –
b (cal • g mole-1 )
c –
–
(kcal • g mole-1)
(e.u.)
Fe2O3
Solid, α Solid, β Solid, γ
21.88 48.00
48.20 18.6
– –
– –
8.666 12.652
104.0 238.3
Solid Liquid Gas Solid
23.49 36.00 31.71 (13.8)
18.6 – 1.8 –
– – – –
–3.55 – – –
9.021 11.979 8.467 (4.497)
119.9 187.6 159.7 (58.7)
Liquid Solid Gas
(21.5) (14) 11.77
– – 25.2
– – –
– – –
(–0.559) (–28.06) (4.630)
(94.1) (22.3) (54.35)
Solid (α,β) Liquid
(35.5) (10.4)
– (2.6)
– –
– (–0.5)
(–20.66) (3.3)
(173.2) (47.8)
Ga2O
Ga2O3
GeO
GeO2
d
A
For discussion of these coefficients, please see Table 75, Key to Tables of Thermodynamic Coefficients on page 257 Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
B
Table 77. THERMODYNAMIC COEFFICIENTS FOR (SHEET 7 OF 23)
OXIDES
Oxide
Phase
a –
b (cal • g mole-1 )
c –
–
(kcal • g mole-1)
(e.u.)
In2O
Solid Liquid Gas
(14.7) (22) (15)
(7.8) – –
– – –
– – –
(4.730) (3.206) (–18.39)
(58.1) (92.6) (25.8)
InO
Solid Liquid Gas
(10.0) (14) (9.0)
(3.2) – –
– – –
– – –
(3.124) (1.615) (–68.38)
(43.4) (64.9) (–3.1)
In2O3
Solid Liquid
(22.6) (35)
(6.0) –
– –
– –
(7.005) (–0.195)
(100.5) (172.8)
Ir2O3
Solid Liquid Gas Solid
(21.8) (35) (20) 9.17
(14.4) – (10) 15.20
– – – –
– – – –
(7.140) (0.706) (–57.73) 3.410
(102.0) (170.3) (54.8) 40.9
Solid Liquid
(15.9) (22)
(6.4) –
– –
– –
(5.025) (1.130)
(69.5) (98.3)
IrO2 K2O
d
A
For discussion of these coefficients, please see Table 75, Key to Tables of Thermodynamic Coefficients on page 257 Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
B
Table 77. THERMODYNAMIC COEFFICIENTS FOR (SHEET 8 OF 23)
OXIDES
Oxide
Phase
a –
b (cal • g mole-1 )
c –
–
(kcal • g mole-1)
(e.u.)
K2O2
Solid Liquid Gas
(20.8) (29) (20)
(5.4) – –
– – –
– – –
(6.442) (4.127) (–57.07)
(93.1) (134.2) (41.7)
K2O3
Solid Liquid Gas
(19.1) (35.5) (20)
(23.2) – (5.0)
– – –
– – –
(6.750) (6.447) (–31.29)
(82.2) (164.7) (37.3)
KO2
Solid Liquid
(15.0) (24)
(12.0) –
– –
– –
(5.006) (3.424)
(61.1) (105.5)
La2O3
Solid
28.86
3.076
–
–3.275
9.840
(130.7)
Li2O
Solid Liquid
(11.4) (21)
(5.4) –
– –
– –
(3.639) (–1.961)
(57.5) (112.7)
Li2O2
Solid
(17.0)
(5.4)
–
–
(5.309)
(82.0)
d
A
For discussion of these coefficients, please see Table 75, Key to Tables of Thermodynamic Coefficients on page 257 Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
B
Table 77. THERMODYNAMIC COEFFICIENTS FOR (SHEET 9 OF 23)
OXIDES
Oxide
Phase
a –
b (cal • g mole-1 )
c –
–
(kcal • g mole-1)
(e.u.)
MgO
Solid
10.86
1.197
–
–2.087
3.991
57.0
MgO2
Solid
(12.1)
(2A)
–
–
(3.714)
(49.2)
MnO
Solid Liquid
11.11 (13.5)
1.94 –
– –
–0.88 –
3.689 (–8.543)
50.10 (58.02)
Mn3O4
Solid, α Solid, β Liquid
34.64 50.20 (49)
10.82 – –
– – –
–2.20 – –
11.312 17.376 (–17.86)
166.3 260.4 (233.4)
Mn2O3
Solid
24.73
8.38
–
–3.23
8.829
118.8
MnO2
Solid
16.60
2.44
–
–3.88
6.359
84.8
MoO2
Solid Liquid
(16.2) (23)
(3.0) –
– –
(–3.0) –
(5.973) (–2.463)
(80.4) (118.4)
d
A
For discussion of these coefficients, please see Table 75, Key to Tables of Thermodynamic Coefficients on page 257 Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
B
Table 77. THERMODYNAMIC COEFFICIENTS FOR (SHEET 10 OF 23)
OXIDES
Oxide
Phase
a –
b (cal • g mole-1 )
c –
–
(kcal • g mole-1)
(e.u.)
MoO3
Solid Liquid Gas
13.6 (28.4) (18.1)
13.5 – –
– – –
– – –
4.655 (0.222) (–48.54)
62.83 (139.88) (42.8)
N2O
Gas
(10.92)
2.06
–
–2.04
4.032
11.40
Na2O
Solid Liquid
15.70 (22)
5.40 –
– –
– –
4.921 (1.494)
73.7 (105.9)
Na2O2
Solid
(20.2)
(3.8)
–
–
(6.192)
(93.6)
NaO2
Solid Liquid Gas
(16.2) (23) (15)
(3.6) – –
– – –
– – –
(4.990) (3.175) (–35.22)
(65.7) (100.9) (22.0)
NbO
Solid
(9.6)
(4.4)
–
–
(3.058)
(44.0)
d
A
For discussion of these coefficients, please see Table 75, Key to Tables of Thermodynamic Coefficients on page 257 Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
B
Table 77. THERMODYNAMIC COEFFICIENTS FOR (SHEET 11 OF 23)
OXIDES
Oxide
Phase
a –
b (cal • g mole-1 )
c –
–
(kcal • g mole-1)
(e.u.)
NbO2
Solid Liquid
(17.1) (24)
(1.6) –
– –
(–2.8) –
(6.109) (1.033)
(84.6) (127.2)
Nb2O5
Solid Liquid
21.88 (44.2)
28.2 –
– –
– –
7.776 (–24.09)
100.3 (201.6)
Nd2O3
Solid
28.99
5.760
–
(–4.159)
10.295
(133.9)
NiO
Solid Liquid
13.69 (14.3)
0.83 –
– –
–2.915 –
5.097 (–7.861)
70.67 (67.91)
NpO2 Np2O5
Solid Solid
(17.7) (32.4)
(3.2) (12.6)
– –
(–2.6) –
(6.292) (10.22)
(84.08) (145.4)
OsO2
Solid
(11.5)
(6.0)
–
–
(3.696)
(52.8)
d
A
For discussion of these coefficients, please see Table 75, Key to Tables of Thermodynamic Coefficients on page 257 Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
B
Table 77. THERMODYNAMIC COEFFICIENTS FOR (SHEET 12 OF 23)
OXIDES
Oxide
Phase
a –
b (cal • g mole-1 )
c –
–
(kcal • g mole-1)
(e.u.)
OsO4
Solid Liquid Gas
(16.4) (33) 16.46
(23.1) – 8.60
– – –
(–2.4) – –4.6
(6.726) (6.612) (–7.644)
(67.0) (143.0) (25.3)
P2O3
Liquid Gas
(34.5) (153)
– (10)
– –
– –
(10.287) (–1.953)
(162.6) (38.0)
PO2
Solid Liquid
(11.3) (20)
(5.0) –
– –
– –
(3.591) (3.640)
(54.4) (95.9)
P2O5
Solid Gas
8.375 36.80
5.40 –
– –
– –
4.897 3.284
30.3 165.6
PaO2
Solid
(14.4)
(2.6)
–
–
(4.409)
(65.0)
Pa2O5
Solid Liquid
(28.4) (48)
(11.4) –
– –
– –
(8.975) (–0.800)
(127.7) (241.1)
d
A
For discussion of these coefficients, please see Table 75, Key to Tables of Thermodynamic Coefficients on page 257 Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
B
Table 77. THERMODYNAMIC COEFFICIENTS FOR (SHEET 13 OF 23)
OXIDES
Oxide
Phase
a –
b (cal • g mole-1 )
c –
–
(kcal • g mole-1)
(e.u.)
PbO
Solid, red Solid, yellow Liquid Gas
10.60 9.05 (14.6) (8.1)
4.00 6.40 – (0.4)
– – – –
– – – –
3.338 2.454 1.788 (–59.94)
45.4 36.4 65.7 (–11.0)
Pb2O4 PbO2 PdO
Solid Solid Solid
(31.1) 12.7 3.30
(17.6) 7.80 14.2
– – –
– – –
(10.055) 4.133 1.615
(132.0) 56.4 (13.9)
PoO2
Solid Liquid
(14.3) (22)
(5.6) –
– –
– –
(4.513) (3.460)
(66.1) (106.5)
Pr2O3
Solid Liquid
(29.0) (36)
(4.0) –
– –
(–4.0) –
(10.166) (–6.298)
(133.2) (168.3)
PrO2
Solid
(17.6)
(3.4)
–
(–2.8)
(6.338)
(85.9)
d
A
For discussion of these coefficients, please see Table 75, Key to Tables of Thermodynamic Coefficients on page 257 Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
B
Table 77. THERMODYNAMIC COEFFICIENTS FOR (SHEET 14 OF 23)
OXIDES
Oxide
Phase
a –
b (cal • g mole-1 )
c –
–
(kcal • g mole-1)
(e.u.)
PtO Pt3O4
Solid Solid
(9.0) (30.8)
(6.4) (17.4)
– –
– –
(2.968) (9.957)
(39.7) (139.7)
PtO2
Solid Liquid
(11.1) (21)
(9.6) –
– –
– –
(3.736) (3.785)
(49.6) (101.5)
PuO
Solid Liquid Gas
(12.0) (14.5) (8.9)
(2.4) – –
– – –
– – –
(3.685) (–2.287) (–62.307)
(49.1) (58.3) (–5.3)
Pu2O3
Solid Liquid
(21.2) (40)
(18.2) –
– –
– –
(7.130) (–5.691)
(88.2) (187.2)
PuO2
Solid Liquid
(17.1) (20.5)
(3.4) –
– –
(–2.6) –
(6.122) (–10.62)
(80.2) (92.2)
RaO
Solid
(10.5)
(2.0)
–
–
(3.220)
(43.4)
d
A
For discussion of these coefficients, please see Table 75, Key to Tables of Thermodynamic Coefficients on page 257 Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
B
Table 77. THERMODYNAMIC COEFFICIENTS FOR (SHEET 15 OF 23)
OXIDES
Oxide
Phase
a –
b (cal • g mole-1 )
c –
–
(kcal • g mole-1)
(e.u.)
Rb2O
Solid Liquid
(15.4) (22)
(5.8) –
– –
– –
(4.850) (2.754)
(62.5) (95.9)
Rb2O2
Solid Liquid
(20.9) (29)
(8.0) –
– –
– –
(6.587) (3.273)
(94.0) (133.2)
Rb2O3
Solid Liquid
(20.5) (34)
(13.0) –
– –
– –
(6.690) (5.603)
(88.2) (157.8)
RbO2
Solid Liquid
(13.8) (21)
(6.4) –
– –
– –
(4.399) (3.720)
(59.0) (95.7)
ReO2
Solid Liquid
(10.8) (24.5)
(9.8) –
– –
– –
(3.656) (1.204)
(49.5) (127.0)
ReO3
Solid Liquid
(18.0) 29
(5.8) –
– –
– –
(5.625) (4.644)
(84.5) (136.8)
d
A
For discussion of these coefficients, please see Table 75, Key to Tables of Thermodynamic Coefficients on page 257 Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
B
Table 77. THERMODYNAMIC COEFFICIENTS FOR (SHEET 16 OF 23)
OXIDES
Oxide
Phase
a –
b (cal • g mole-1 )
c –
–
(kcal • g mole-1)
(e.u.)
Re2O7
Solid Liquid Gas
(41.8) (65.7) (38.2)
(14.8) – –
– – –
(–3.0) – –
(14.127) (9.203) (–25.97)
(200.3) (314.7) (109.3)
ReO4
Solid Liquid Gas
(21.4) (33) (16.5)
(10.8) – (8.6)
– – –
(–2.0) – (–5.0)
(7.531) (6.775) (–8.118)
(91.8) (146.7) (30.6)
Rh2O RhO Rh2O3 RuO2
Solid Solid Solid Solid
15.59 (9.84) 20.73 (11.4)
6.47 (553) 13.80 (6.0)
– – – –
– – – –
4.936 (3.179) 6.794 3.666
(65.3) (45.7) (99.2) (54.2)
RuO4
Solid Liquid
(20) (33)
– –
– –
– –
(5.963) (6.663)
(81.5) (144.9)
SO2
Gas
11.4
1.414
–
–2.045
4.148
7.12
d
A
For discussion of these coefficients, please see Table 75, Key to Tables of Thermodynamic Coefficients on page 257 Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
B
Table 77. THERMODYNAMIC COEFFICIENTS FOR (SHEET 17 OF 23)
OXIDES
Oxide
Phase
a –
b (cal • g mole-1 )
c –
–
(kcal • g mole-1)
(e.u.)
Sb2O3
Solid Liquid Gas
19.10 (36) (20.8)
17.1 – –
– – –
– – –
6.455 (0.035) (–34.70)
84.5 (168.2) (49.9)
SbO2 Sb2O5
Solid Solid
11.30 (22.4)
8.1 (23.6)
– –
– –
3.725 (7.723)
51.6 (104.8)
Sc2O3
Solid
23.17
5.64
–
–
7.159
1089
SeO
Solid Liquid Gas
(9.1) (15.5) 8.20
(3.8) – 0.50
– – –
– – –0.80
(2.882) (0.490) (–58.54)
(42.0) (77.5) (0.7)
SeO2
Solid Gas
(12.8) (14.5)
(6.1) –
– –
(–0.2) –
(4.150) (–20.45)
(59.9) (26.4)
SiO
Solid
(7.3)
(2.4)
–
–
(2.283)
(35.8)
d
A
For discussion of these coefficients, please see Table 75, Key to Tables of Thermodynamic Coefficients on page 257 Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
B
Table 77. THERMODYNAMIC COEFFICIENTS FOR (SHEET 18 OF 23)
OXIDES
Oxide
Phase
a –
b (cal • g mole-1 )
c –
–
(kcal • g mole-1)
(e.u.)
SiO2
Solid, β Solid, α Liquid
11.22 14.41 (20)
8.20 1.94 –
– – –
–2.70 – –
4.615 4.602 (9.649)
57.83 73.67 (111.08)
Sm2O3
Solid Liquid
(25.9) (36)
(7.0) –
– –
– –
(8.033) (–6.431)
(113.2) (166.3)
SnO
Solid Liquid Gas
9.40 (14.5) (9.0)
3.62 – –
– – –
– – –
2.964 (0.141) (–69.76)
41.1 (68.1) (–6.4)
SnO2
Solid Liquid
17.66 (22.5)
2.40 –
– –
–5.16 –
7.103 (0.304)
91.7 (117.7)
SrO SrO2
Solid Solid
12.34 (16.8)
1.120 (2.2)
– –
–1.806 (–3.0)
4.335 (6.113)
58.7 (83.3)
d
A
For discussion of these coefficients, please see Table 75, Key to Tables of Thermodynamic Coefficients on page 257 Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
B
Table 77. THERMODYNAMIC COEFFICIENTS FOR (SHEET 19 OF 23)
OXIDES
Oxide
Phase
a –
b (cal • g mole-1 )
c –
–
(kcal • g mole-1)
(e.u.)
Ta2O5
Solid Liquid
29.2 (46)
10.0 –
– –
– –
9.151 (6.158)
135.2 (235.1)
TcO2
Solid Liquid
(10.4) (25)
(9.2) –
– –
– –
(3.510) (–5.946)
(48.6) (132.7)
TcO3
Solid
(19.4)
(5.2)
–
(–2.0)
(6.686)
(93.7)
Tc2O7
Solid Liquid Gas
(39.1) (64) (25)
(18.6) – (28)
– – –
(–2.4) – –
(13.29) (10.02) (–21.98)
(187.2) (299.8) (43.8)
TeO
Solid Liquid Gas
(8.6) (15.5) (8.9)
(6.2) – –
– – –
– – –
(2.840) (–0.448) (–62.16)
(37.8) (72.3) (–5.2)
TeO3
Solid Liquid
13.85 (20)
6.87 –
– –
– –
4.435 (3.940)
63.97 (96.4)
d
A
For discussion of these coefficients, please see Table 75, Key to Tables of Thermodynamic Coefficients on page 257 Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
B
Table 77. THERMODYNAMIC COEFFICIENTS FOR (SHEET 20 OF 23)
OXIDES
Oxide
Phase
a –
b (cal • g mole-1 )
c –
–
(kcal • g mole-1)
(e.u.)
TeO2
Solid Liquid
(11.0) (15)
(2.4) –
– –
– –
(3.386) (–6.561)
(47.4) (66.9)
ThO2
Solid
16.45
2.346
–
–2.124
5.721
80.03
TiO
Solid, α Solid, β
10.57 11.85
3.60 3.00
– –
–1.86 –
3.935 4.108
54.03 61.71
Ti2O3
Solid, α Solid, β Liquid
7.31 34.68 (37.5)
53.52 1.30 –
– – –
– –10.20 –
4.559 13.605 (–7.796)
38.78 184.48 (193.2)
Ti3O5
Solid, α Solid, β Liquid
35.47 41.60 (60)
29.50 8.00 –
– – –
– – –
11.887 10.230 (–18.701)
179.98 202.80 (306.4)
d
A
For discussion of these coefficients, please see Table 75, Key to Tables of Thermodynamic Coefficients on page 257 Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
B
Table 77. THERMODYNAMIC COEFFICIENTS FOR (SHEET 21 OF 23)
OXIDES
Oxide
Phase
a –
b (cal • g mole-1 )
c –
–
(kcal • g mole-1)
(e.u.)
TiO2
Solid Liquid
17.97 (21.4)
0.28 –
– –
–4.35 –
6.829 (–2.610)
92.92 (111.08
Ti2O
Solid Liquid Gas
(15.8) (22.1) (13.7)
(6.0) – –
– – –
(–0.3) – –
(5.078) (2.651) (–20.94)
(68.2) (96.0) (18.0)
Tl2O3
Solid Liquid
(23.0) (35.5)
(5.0) –
– –
– –
(7.080) (4.604)
(99.0) (167.8)
UO UO2
Solid Solid Solid Solid
(10.6) 19.20 (65) 22.09
(2.0) 1.62 (7.5) 2.54
– – – –
– –3.957 (–10.9) –2.973
(3.249) 7.124 (23.37) 7.969
(45.0) 93.37 (312.7) 104.72
Solid Liquid
11.32 (14.5)
1.61 –
– –
–1.26 –
3.869 (–8.157)
56.4 (70.9)
U3O8 UO3 VO
d
A
For discussion of these coefficients, please see Table 75, Key to Tables of Thermodynamic Coefficients on page 257 Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
B
Table 77. THERMODYNAMIC COEFFICIENTS FOR (SHEET 22 OF 23)
OXIDES
Oxide
Phase
a –
b (cal • g mole-1 )
c –
–
(kcal • g mole-1)
(e.u.)
V2O3
Solid Liquid
29.35 (38)
4.76 –
– –
–5.42 –
10.780 (–6.028)
148.12 (193.4)
V3O4
Solid Liquid
(36) (55.6)
(30) –
– –
– –
(12.07) (–54.72)
(182.1) (249.1)
VO2
Solid, α Solid, β Liquid
14.96 17.85 25.50
– 1.70 –
– – –
– –3.94 –
4.460 5.680 2.962
72.92 89.09 135.87
V2O5
Solid Liquid Gas
46.54 45.60 (40)
–390 – –
– – –
–13.22 – –
18.136 2.122 (–73.90)
240.2 220.1 (149.6)
WO2
Solid Liquid
(17.6) (24)
(4.2) –
– –
(–4.0) –
(6.772) (–0.112)
(88.8) (121.8)
d
A
For discussion of these coefficients, please see Table 75, Key to Tables of Thermodynamic Coefficients on page 257 Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
B
Table 77. THERMODYNAMIC COEFFICIENTS FOR (SHEET 23 OF 23)
OXIDES
Oxide
Phase
a –
b (cal • g mole-1 )
c –
–
(kcal • g mole-1)
(e.u.)
WO3
Solid Liquid Gas
17.33 (30) (18)
7.74 – –
– – –
– – –
5.511 (–1.162) (–69.36)
81.15 (152.5) (40.2)
Y2O3
Solid
(26.0)
(8.2)
–
(–2.2)
(8.846)
(122.3)
ZnO ZrO2
Solid Solid, α Solid, β
11.71 16.64 17.80
1.22 1.80 –
– – –
–2.18 –3.36 –
4.277 6.168 4.270
57.88 85.21 89.96
d
A
For discussion of these coefficients, please see Table 75, Key to Tables of Thermodynamic Coefficients on page 257 Source: data from Weast, R. C., Ed., Handbook of Chemistry and Physics, 55th ed., CRC Press, Cleveland, 1974, D-58.
©2001 CRC Press LLC
B
6.5 Thermodynamics Page 298 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 78. ENTROPY OF THE (SHEET 1 OF 3)
ELEMENTS
Element
Phase
Entropy at 298K (e.u.)
Ac Ag Al Am
solid solid solid solid
(13) 10.20 6.769 (13)
As Au B Ba
solid solid solid solid, α
8.4 11.32 1.42 16
Be Bi C Ca
solid solid solid solid, α
2.28 13.6 1.3609 9.95
Cd Ce Cl2 Co
solid solid gas solid, α
12.3 13.8 53.286 6.8
Cr Cs Cu F2
solid solid solid gas
5.68 19.8 7.97 48.58
Fe Ga Ge H2
solid, α solid solid gas
6.491 9.82 10.1 31.211
Hf Hg In Ir
solid liquid solid solid
13.1 18.46 13.88 8.7
Source: data from Weast, R. C. Ed., Handbook of Chemistry and Physics, 69th ed., CRC Press, Boca Raton, Fla., 1988, D44.
©2001 CRC Press LLC
298
CRC Handbook of Materials Science & Engineering
6.5 Thermodynamics Page 299 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 78. ENTROPY OF THE (SHEET 2 OF 3)
ELEMENTS
Element
Phase
Entropy at 298K (e.u.)
K La Li Mg
solid solid solid solid
15.2 13.7 6.70 7.77
Mn Mo N2 Na
solid, α solid gas solid
7.59 6.83 45.767 12.31
Nb Nd Ni Np
solid solid solid, α solid
8.3 13.9 7.137 (14)
O2 Os P4 Pa
gas solid solid, white solid
49.003 7.8 42.4 (13.5)
Pb Pd Po Pr
solid solid solid solid
15.49 8.9 13 (13.5)
Pt Pu Ra Rb
solid solid solid solid
10.0 (13.0) (17) 16.6
Re Rh Ru S
solid solid solid, α solid, α
(8.89) 7.6 6.9 7.62
Source: data from Weast, R. C. Ed., Handbook of Chemistry and Physics, 69th ed., CRC Press, Boca Raton, Fla., 1988, D44.
©2001 CRC Press LLC
Shackelford & Alexander
299
6.5 Thermodynamics Page 300 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 78. ENTROPY OF THE (SHEET 3 OF 3)
ELEMENTS
Element
Phase
Entropy at 298K (e.u.)
Sb Sc Se Si
solid (α, β, γ) solid solid solid
10.5 (9.0) 10.144 4.50
Sm Sn Sr Ta
solid solid (α, β) solid solid
(15) 12.3 13.0 9.9
Tc Te Th Ti
solid solid, α solid solid, α
(8.0) 11.88 12.76 7.334
Tl U V W
solid, α solid, α solid solid
15.4 12.03 7.05 8.0
Y Zn Zr
solid solid solid, α
(11) 9.95 9.29
Source: data from Weast, R. C. Ed., Handbook of Chemistry and Physics, 69th ed., CRC Press, Boca Raton, Fla., 1988, D44.
©2001 CRC Press LLC
300
CRC Handbook of Materials Science & Engineering
6.5 Thermodynamics Page 301 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 79. VAPOR
PRESSURE OF THE ELEMENTS AT VERY LOW PRESSURES (SHEET 1 OF 2) Pressure (mm Hg)
Element
Melting point (˚C)
10 -5
10-4
10-3
10-2
10-1
1
Ag Al Au Ba
961 660 1063 717
767 724 1083 418
848 808 1190 476
936 889 1316 546
1047 996 1465 629
1184 1123 1646 730
1353 1279 1867 858
Be Bi C Cd
1284 271
1029 536 2288 180
1130 609 2471 220
1246 698 2681 264
1395 802 2926 321
1582 934 3214
321
942 474 2129 148
Co Cr Cu Fe
1478 1900 1083 1535
1249 907 946 1094
1362 992 1035 1195
1494 1090 1141 1310
1649 1205 1273 1447
1833 1342 1432 1602
2056 1504 1628 1783
Hg In Ir Mg
–38.9 157 2454 651
–23.9 667 1993 287
–5.5 746 2154 331
18.0 840 2340 383
48.0 952 2556 443
82.0 1088 2811 515
126 1260 3118 605
Mn Mo Ni Os
1244 2622 1455 2697
717 1923 1157 2101
791 2095 1257 2264
878 2295 1371 2451
980 2533 1510 2667
1103
1251
1679 2920
1884 3221
To convert mm Hg (torr) to N/m2, divide by 133.3 To convert atm to MN/m2, divide by 0.1013 This table lists the temperature in degrees Celsius (Centigrade) at which an element has a vapor pressure indicated by the headings of the columns. The values given in this table are from a variety of sources that are not always in agreement; for that reason, the table should be used only as a general guide. Source: from Dushman, S., Scientific Foundations of Vacuum Technique, John Wiley & Sons, New York, (1949)
©2001 CRC Press LLC
Shackelford & Alexander
301
6.5 Thermodynamics Page 302 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 79. VAPOR
PRESSURE OF THE ELEMENTS AT VERY LOW PRESSURES (SHEET 2 OF 2) Pressure (mm Hg)
Element
Melting point (˚C)
10 -5
10-4
10-3
10-2
10-1
1
Pb Pd Pt Sb
328 1555 1774 630
483 1156 1606 466
548 1271 1744 525
625 1405 1904 595
718 1566 2090 678
832 1759 2313 779
975 2000 2582 904
Si Sn Ta W
1410 232 2996 3382
1024 823 2407 2554
1116 922 2599 2767
1223 1042 2820 3016
1343 1189
1485 1373
1670 1609
Zn Zr
419 2127
211 1527
248 1660
292 1816
343 2001
405 2212
2459
3309
To convert mm Hg (torr) to N/m2, divide by 133.3 To convert atm to MN/m2, divide by 0.1013 This table lists the temperature in degrees Celsius (Centigrade) at which an element has a vapor pressure indicated by the headings of the columns. The values given in this table are from a variety of sources that are not always in agreement; for that reason, the table should be used only as a general guide. Source: from Dushman, S., Scientific Foundations of Vacuum Technique, John Wiley & Sons, New York, (1949)
©2001 CRC Press LLC
302
CRC Handbook of Materials Science & Engineering
6.5 Thermodynamics Page 303 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 80. VAPOR
PRESSURE OF THE ELEMENTS AT MODERATE PRESSURES (SHEET 1 OF 3) Pressure (mm Hg)
Element
Symbol
1
10
100
400
760
Aluminum Antimony Arsenic Barium
Al Sb As Ba
1540
1780 960 440 1050
2080 1280 510 1300
2320 1570 580 1520
2467 1750 610 1640
Beryllium Bismuth Boron Bromine
Be Bi B Br
1520
1860 1060 3030 –30
2300 1280 3460 +9
2770 1450 3810 39
2970 1560 4000 59
Cadmium Calcium Cesium Chlorine
Cd Ca Cl Cl
486 970 373 –101
610 1200 513 –71
710 1390 624 –46
765 1490 690 –34
Chromium Cobalt Copper Fluorine
Cr Co Cu F
1610 1910
1840 2170 1870
2140 2500 2190 –203
2360 2760 2440 –193
2480 2870 2600 –188
Gallium Germanium Gold Indium
Ca Ge Au In
1350
1570 2080 2160
1850 2440 2520
2060 2710 2800 1960
2180 2830 2940 2080
380 860
2660 –60 393 800 –123
1880
To convert mm Hg (torr) to N/m2, divide by 133.3 To convert atm to MN/m2, divide by 0.1013 This table lists the temperature in degrees Celsius (Centigrade) at which an element has a vapor pressure indicated by the headings of the columns. The values given in this table are from a variety of sources that are not always in agreement; for that reason, the table should be used only as a general guide. Source: from Dushman, S., Scientific Foundations of Vacuum Technique, John Wiley & Sons, New York, (1949)
©2001 CRC Press LLC
Shackelford & Alexander
303
6.5 Thermodynamics Page 304 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 80. VAPOR
PRESSURE OF THE ELEMENTS AT MODERATE PRESSURES (SHEET 2 OF 3) Pressure (mm Hg)
Element
Symbol
1
10
100
400
760
Iodine Iridium Iron Lanthanum
I Ir Fe La
40 2830 1780
72 3170 2040
115 3630 2370
160 3960 2620 3230
185 4130 2750 3420
Lead Lithium Magnesium Manganese
Pb Li Mg Mn
970 750 620
1160 890 740 1510
1420 1080 900 1810
1630 1240 1040 2050
1740 1310 1110 2100
Mercury Molybdenum Neodymium Nickel
Hg Mo Nd Ni
3300
3770
260 4200
1800
2090
2370
330 4580 2870 2620
356.9 4830 3100 2730
Palladium Phosphorus Platinum Polonium
Pd P Pt Po
1470
2290 127 2940 587
2670 199 3360 752
2950 253 3650 890
3140 283 3830 960
Potassium Rhodium Rubidium Selenium
K Rh Rb Se
2850 390 429
590 3260 527 547
710 3590 640 640
770 3760 700 685
2600 472
2530
To convert mm Hg (torr) to N/m2, divide by 133.3 To convert atm to MN/m2, divide by 0.1013 This table lists the temperature in degrees Celsius (Centigrade) at which an element has a vapor pressure indicated by the headings of the columns. The values given in this table are from a variety of sources that are not always in agreement; for that reason, the table should be used only as a general guide. Source: from Dushman, S., Scientific Foundations of Vacuum Technique, John Wiley & Sons, New York, (1949)
©2001 CRC Press LLC
304
CRC Handbook of Materials Science & Engineering
6.5 Thermodynamics Page 305 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 80. VAPOR
PRESSURE OF THE ELEMENTS AT MODERATE PRESSURES (SHEET 3 OF 3) Pressure (mm Hg)
Element
Symbol
1
10
100
400
760
Silver Sodium Strontium Sulfur
Ag Na Sr S
1310 440 740
1540 546 900 246
1850 700 1100 333
2060 830 1280 407
2210 890 1380 445
Tellurium Thallium Tin Titanium
Te Tl Sn Ti
520
633 1000 1890 2480
792 1210 2270 2860
900 1370 2580 3100
962 1470 2750 3260
Tungsten Uranium Vanadium Zinc
W U V Zn
4490 2800 2570 590
5160 3270 2950 730
5470 3620 3220 840
5940 3800 3380 907
1610 2180 3980 2450 2290
To convert mm Hg (torr) to N/m2, divide by 133.3 To convert atm to MN/m2, divide by 0.1013 This table lists the temperature in degrees Celsius (Centigrade) at which an element has a vapor pressure indicated by the headings of the columns. The values given in this table are from a variety of sources that are not always in agreement; for that reason, the table should be used only as a general guide. Source: from Dushman, S., Scientific Foundations of Vacuum Technique, John Wiley & Sons, New York, (1949)
©2001 CRC Press LLC
Shackelford & Alexander
305
6.5 Thermodynamics Page 306 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 81. VAPOR
PRESSURE OF THE ELEMENTS AT HIGH PRESSURES (SHEET 1 OF 3) Pressure (atm)
Element
Symbol
2
5
10
20
40
Aluminum Antimony Arsenic Barium
Al Sb As Ba
2610 1960
2850 2490
3050
3270
3530
1790
2030
2230
Beryllium Bismuth Boron Bromine
Be Bi B Br
3240 1660
3730 1850
4110 2000
4720 2180
5610
78
110
Cadmium Calcium Cesium Chlorine
Cd Ca Cl Cl
830 1630
930 1850
1030 2020
1120 2290
1240
–17
+9
30
55
97
Chromium Cobalt Copper Fluorine
Cr Co Cu F
2630 3040 2760 –180.7
2850 3270 3010 –169.1
3010
3180
3500 –159.6
3460
Gallium Germanium Gold Indium
Ca Ge Au In
2320 2970 3120 2230
2560 3200 3490 2440
2730 3430 3630 2600
Iodine Iridium Iron Lanthanum
I Ir Fe La
216 4310 2900 3620
265 4650 3150 3960
3360 4270
3740
3890
3570
To convert atm to MN/m2 divide by 0.1013 This table lists the temperature in degrees Celsius (Centigrade) at which an element has a vapor pressure indicated by the headings of the columns. Source: from Loebel, R., in Handbook of Chemistry and Physics, 55th ed., Weast, R. C., Ed., CRC Press, Cleveland, (1974)
©2001 CRC Press LLC
306
CRC Handbook of Materials Science & Engineering
6.5 Thermodynamics Page 307 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 81. VAPOR
PRESSURE OF THE ELEMENTS AT HIGH PRESSURES (SHEET 2 OF 3) Pressure (atm)
Element
Symbol
2
5
10
20
40
Lead Lithium Magnesium Manganese
Pb Li Mg Mn
1880 1420 1190 2360
2140 1518 1330 2580
2320
2620
1430 2850
1560
Mercury Molybdenum Neodymium Nickel
Hg Mo Nd Ni
398 5050 3300 2880
465 5340 3680 3120
517 5680 3990 3300
581 5980
Palladium Phosphorus Platinum Polonium
Pd P Pt Po
3270 319 4000 1060
3560
3840
4310 1200
4570 1340
4860
Potassium Rhodium Rubidium Selenium
K Rh Rb Se
850 3930
950 4230
1110 4440
1240
1420
750
850
920
1010
1120
Silver Sodium Strontium Sulfur
Ag Na Sr S
2360 980 1480 493
2600 1120 1670 574
2850 1230 1850 640
3050 1370 2030 720
3300
Tellurium Thallium Tin Titanium
Te Tl Sn Ti
1030 1560 2950 3400
1160 1750 3270 3650
1250 1900 3540 3800
2050 3890
2260
657
3310
To convert atm to MN/m2 divide by 0.1013 This table lists the temperature in degrees Celsius (Centigrade) at which an element has a vapor pressure indicated by the headings of the columns. Source: from Loebel, R., in Handbook of Chemistry and Physics, 55th ed., Weast, R. C., Ed., CRC Press, Cleveland, (1974)
©2001 CRC Press LLC
Shackelford & Alexander
307
6.5 Thermodynamics Page 308 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 81. VAPOR
PRESSURE OF THE ELEMENTS AT HIGH PRESSURES (SHEET 3 OF 3) Pressure (atm)
Element
Symbol
2
5
10
20
Tungsten Uranium Vanadium Zinc
W U V Zn
6260 4040 3540 970
6670 4420 3800 1090
7250
7670
1180
1290
40
To convert atm to MN/m2 divide by 0.1013 This table lists the temperature in degrees Celsius (Centigrade) at which an element has a vapor pressure indicated by the headings of the columns. Source: from Loebel, R., in Handbook of Chemistry and Physics, 55th ed., Weast, R. C., Ed., CRC Press, Cleveland, (1974)
©2001 CRC Press LLC
308
CRC Handbook of Materials Science & Engineering
6.5 Thermodynamics Page 309 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 82. VAPOR
PRESSURE OF ELEMENTS AND INORGANIC COMPOUNDS * (SHEET 1 OF 5) Formula
a
b
Temperature. Range of Validity ˚C
Al2O3
540000 31211 90208 83486
14.22 9.9974 9.9404 10.0164
1840 to 2200 liq. –127 to –78 sol. 250 to 400 sol. 100 to 400 sol.
41484 95730 46025 189000
9.978 10.2700 10.7500 9.051
7 to 17 sol. 300 to 400 sol. 6 to 40 sol. 1070 to 1325 liq.
7814.5 6826 47100 133000
7.5741 6.9605 6.692 10.800
–208 to –189 sol. –189 to –183 liq. 800 to 860 liq. 440 to 815 sol.
As2O3
111350 52120
12.127 6.513
100 to 315 sol. 315 to 490 liq.
Ba Bi
350000 200000 13125
15.765 8.876 2.681
930 to 1130 liq. 1210 to 1420 liq. 91 to 213 sol.
Cd
10900 99900
8.564 7.897
150 to 320.9 sol.. 500 to 840 liq
Cadimium Iodide
CdI2
122200
9.269
385 to 450 liq.
Cesium Cesium Chloride Calcium Carbon
Cs CsCl Ca C
73400 163200 370000 540000
6.949 8.340 16.240 9.596
200 to 350 liq. 986 to 1295 liq. 960 to 1110 liq. 3880 to 4430 liq.
Carbon Dioxide Carbon Monooxide Chlorine Cobalt
CO2
26179.3 6354 29293 309000
9.9082 6.976 9.950 7.571
–135 to –56.7 liq. –220 to –206 liq. –154 to –103 liq. 2375 liq.
Compound Aluminum Oxide Ammonia Ammonium Bromide Ammonium Chloride Ammonium Cyanide Ammonium Iodide Ammonium Sulfhydrate Antimony
NH3 NH4Br NH4Cl NH4CN NH4I NH4HS
Sb
Argon
Ar
Arsenic
As
Arsenous Oxide
Barium Bismuth Bismuth Trichloride Cadimium
BiCl3
CO Cl Co
Source: data compiled by J.S. Park from CRC Handbook of Chemistry and Physics, David R. Lide, Ed., CRC Press, Boca Raton, (1990).
©2001 CRC Press LLC
Shackelford & Alexander
309
6.5 Thermodynamics Page 310 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 82. VAPOR
PRESSURE OF ELEMENTS AND INORGANIC COMPOUNDS * (SHEET 2 OF 5)
Compound
Formula
a
b
Temperature. Range of Validity ˚C
Cu
468000 80700
12.344 5.454
2100 to 2310 liq. 878 to 1369 liq.
Copper Cuprous Chloride
Cu2Cl2
Cyanogen
(CN)2
32437 23750
9.6539 7.808
–72 to –28 sol. –32 to –6 liq.
Ferrous Chloride Gold
FeCl2
135200 385000
8.33 9.853
700 to 390 sol. 2315 to 2500 liq.
HI
24160 21580
8.259 7.630
–97 to –51 sol. –50 to –34 liq.
Hydrobromic Acid
HBr
22420 17960
8.734 7.427
–114 to –86 sol. –86 ot –66 liq.
Hydrochloric Acid Hydrocyanic Acid Hydrofluoric Acid Hydrogen Peroxide
HCl HCN HF H2O2
19588 27830 25180 48530
8.4430 7.7446 7.370 8.853
–158 to –110 sol. –8 to 27 liq. –83 to 48 liq. 10 to 90 liq.
Hydrogen Sulfide Iron
H2S
20690 309000
7.880 7.482
–110 to –83 sol. 2220 to 2450 liq.
Krypton
Kr
10065 9377
7.1770 6.92387
–189 to –169 sol. –169 to –150 liq.
Pb
LiBr
188500 118000 141900 152700
7.827 7.827 8.961 8.068
525 to 1325 liq. 735 to 918 liq. 500 to 950 liq. 1010 to 1265 liq.
LiCl LiF LiI
155900 218400 143600
7.939 8.753 8.011
1045 to 1325 liq. 1398 to 1666 liq. 940 to 1140 liq.
Hydriodic Acid
Lead Lead Bromide Lead Chloride Lithium Bromide Lithium Chloride Lithium Fluoride Lithium Iodide
Au
Fe
PbBr2 PbCl2
Source: data compiled by J.S. Park from CRC Handbook of Chemistry and Physics, David R. Lide, Ed., CRC Press, Boca Raton, (1990).
©2001 CRC Press LLC
310
CRC Handbook of Materials Science & Engineering
6.5 Thermodynamics Page 311 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 82. VAPOR
PRESSURE OF ELEMENTS AND INORGANIC COMPOUNDS * (SHEET 3 OF 5) Formula
a
b
Temperature. Range of Validity ˚C
Mg Mn
260000 267000
12.993 9.300
900 to 1070 liq. 1510 to 1900 liq.
Mercuric Bromide
HgBr2
79800 61250
10.181 8.284
111 to 235 sol. 238 to 331 lig.
Mercuric Chloride
HgCl2
85030 78850 61020
10.888 10.094 8.409
60 to 130 sol. 130 to 270 sol. 275 to 309 liq.
Mercuric Iodide
HgI2
82340 62770
10.057 8.115
100 to 250 sol. 266 to 360 liq.
Mercury
Hg
73000 58700
10.383 7.752
–80 to –38.87 sol. 400 to 1300 liq.
Molybdenum Nitrogen
Mo
680000 6881.3
10.844 7.66558
1800 to 2240 sol. –215 to –210 sol.
Nitrogen Dioxide
NO
16423 13040
10.048 8.440
–200 to –161 sol. –163.7 to –148 liq.
Nitrogen Monoxide
N2O
23590 16440
9.579 7.535
–144 to –90 sol. –90.1 to –88.7 liq.
Nitrogen Pentoxide
N2O5
57180
12.647
–30 to 30 sol.
Nitrogen Tetroxide
N2O4
55160 45440 33430
13.400 11.214 8.814
–100 to –40 sol. –40 to –10 sol. –8 to 43.2 liq.
Nitrogen Trioxide Phosphorus (White) Phosphorus (Violet) Platinum Potassium
N2O3
39400 63123 108510 486000 84900
10.30 9.6511 11.0842 7.786 7.183
–25 to 0 liq. 20 to 44.1 sol. 380 to 590 sol. 1425 to 1765 sol. 260 to 760 liq.
Compound Magnesium Magnase
N2
P P Pt K
Source: data compiled by J.S. Park from CRC Handbook of Chemistry and Physics, David R. Lide, Ed., CRC Press, Boca Raton, (1990).
©2001 CRC Press LLC
Shackelford & Alexander
311
6.5 Thermodynamics Page 312 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 82. VAPOR
PRESSURE OF ELEMENTS AND INORGANIC COMPOUNDS * (SHEET 4 OF 5) Formula
a
b
Temperature. Range of Validity ˚C
Potassium Bromide
KBr
168100 163800
8.2470 7.936
906 to 1063 liq. 1095 to 1375 liq.
Potassium Chloride
KCl
174500 169700
8.3526 8.130
906 to 1105 liq. 1116 to 1428 liq.
KF KOH
207500 136000
9.000 7.330
1278 to 1500 liq. 1170 to 1327 liq.
KI
157600 155700
8.0957 7.949
843 to 1028 liq. 1063 to 1333 liq.
Rubidium Rubidium Chloride Silicon Silicon Dioxide
Rb RbCl Si SiO2
76000 198600 170000 506000
6.976 9.111 5.950 13.43
250 to 370 liq. 1142 to 1395 liq. 1200 to 1320 sol. 1860 to 2230 liq.
Silver Silver Chloride Sodium Sodium Bromide
Ag AgCl Na NaBr
250000 185500 103300 161600
8.762 8.179 7.553 7.948
1650 to 1950 liq. 1255 to 1442 liq. 180 to 883 liq. 1138 to 1394 liq.
Sodium Chloride
NaCl
Sodium Cyanide Sodium Fluoride
NaCN NaF
180300 185800 155520 218200
8.3297 8.548 7.472 8.640
976 to 1155 liq. 1156 to 1430 liq. 800 to 1360 liq. 1562 to 1701 liq.
Sodium Hydroxide Sodium Iodide Stannic Chloride Stronium
NaOH NaI
132000 165100 46740 360000
7.030 8.371 9.824 16.056
1010 to 1042 liq. 1063 to 1307 liq. –52 to –38 liq. 940 to 1140 liq.
Compound
Potassium Flouride Potassium Hydroxide Potassium Iodide
SnCl4
Sr
Source: data compiled by J.S. Park from CRC Handbook of Chemistry and Physics, David R. Lide, Ed., CRC Press, Boca Raton, (1990).
©2001 CRC Press LLC
312
CRC Handbook of Materials Science & Engineering
6.5 Thermodynamics Page 313 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 82. VAPOR
PRESSURE OF ELEMENTS AND INORGANIC COMPOUNDS * (SHEET 5 OF 5) Formula
a
b
Temperature. Range of Validity ˚C
SO2
Tl TlCl
35827 43450 120000 105200
10.5916 10.022 6.140 7.947
–95 to –75 liq. 24 to 48 liq. 950 to 1200 liq. 665 to 807 liq.
Tin Tungsten
Sn W
328000 897000
9.643 9.920
1950 to 2270 liq. 2230 to 2770 liq.
Zinc
Zn
133000 118000
9.200 8.108
250 to 491.4 sol. 600 to 985 liq.
Compound Sulfur Dioxide Sulfur Trioxide Thallium Thallium Chloride
SO3
Source: data compiled by J.S. Park from CRC Handbook of Chemistry and Physics, David R. Lide, Ed., CRC Press, Boca Raton, (1990). *
The vapor pressure with respect to temperature may be represented by the following equation: log10 p = –0.05223a/T + b where p is the pressure in mm of mercury of the saturated vapor at the absolute temperature T. (T = t˚C + 273.1) The values obtained by the use of the equation given above are valid within the temperature ranges indicated for each of the compounds.
©2001 CRC Press LLC
Shackelford & Alexander
313
6.5 Thermodynamics Page 314 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 83. VALUES OF THE ERROR (SHEET 1 OF 2)
FUNCTION
z
erf (z)
0.00 0.01 0.02 0.03
0.0000 0.0113 0.0226 0.0338
0.04 0.05 0.10 0.15
0.0451 0.0564 0.1125 0.1680
0.20 0.25 0.30 0.35
0.2227 0.2763 0.3286 0.3794
0.40 0.45 0.50 0.55
0.4284 0.4755 0.5205 0.5633
0.60 0.65 0.70 0.75
0.6039 0.6420 0.6778 0.7112
0.80 0.85 0.90 0.95
0.7421 0.7707 0.7969 0.8209
1.00 1.10 1.20 1.30
0.8427 0.8802 0.9103 0.9340
Source: from: Handbook of Mathematical Functions, M. Abramowitz and I. A. Stegun, eds., National Bureau of Standards, Applied Mathematics Series 55, Washington, D.C., 1972.
©2001 CRC Press LLC
314
CRC Handbook of Materials Science & Engineering
6.5 Thermodynamics Page 315 Wednesday, December 31, 1969 17:00
Thermodynamic and Kinetic Data
Table 83. VALUES OF THE ERROR (SHEET 2 OF 2)
FUNCTION
z
erf (z)
1.40 1.50 1.60 1.70
0.9523 0.9661 0.9763 0.9838
1.80 1.90 2.00
0.9891 0.9928 0.9953
Source: from: Handbook of Mathematical Functions, M. Abramowitz and I. A. Stegun, eds., National Bureau of Standards, Applied Mathematics Series 55, Washington, D.C., 1972.
©2001 CRC Press LLC
Shackelford & Alexander
315
Table 84. DIFFUSION IN METALLIC (SHEET 1 OF 34)
Metal
Tracer
Aluminum
Ag110 Al27 Au198 Cd115 Ce141 60
Co Cr51 Cu64 Fe59 Ga72 Ge71 In114
SYSTEMS *
Temperature Range (˚C)
Activation energy, Q (kcal • mol–1)
Frequency factor, D o
99.999 99.999
371–655 450–650 423–609 441–631
27.83 34.0 27.0 29.7
0.118 1.71 0.077 1.04
P S S S
99.995 99.999 99.999 99.999
450–630 369–655 422–654 433–652
26.60 27.79 41.74 32.27
1.9 x 10–6 0.131 464 0.647
S S S P
99.99 99.999 99.999 99.99
550–636 406–652 401–653 400–600
46.0 29.24 28.98 27.6
135 0.49 0.481 0.123
Crystalline Form
Purity (%)
S S S S
99.999
Source: data from Askill, J.,in Handbook of Chemistry and Physics, 55th ed.,Weast, R.C., Ed., CRC Press, Cleveland,1974, F61.
©2001 CRC Press LLC
(cm2 • s–1)
Table 84. DIFFUSION IN METALLIC (SHEET 2 OF 34)
SYSTEMS *
Crystalline Form
Purity (%)
Temperature Range (˚C)
Activation energy, Q (kcal • mol–1)
Frequency factor, D o
Nb
99.995 99.99 99.995 99.95
500–630 450–650 400–630 350–480
27.0 28.8 13.1 19.65
1.4 x 10–6 0.22
95
P P P P
Nd147 Ni63 Pd103 Pr142
P P P P
99.995 99.99 99.995 99.995
450–630 360–630 400–630 520–630
25.0 15.7 20.2 23.87
Sb124 Sm153
P P P P
448–620 450–630 400–600 400–630
29.1 22.88 28.5 19.6
Metal
Tracer
Aluminum (con’t)
La140 Mn54 Mo99
113
Sn V48
99.995 99.995
Source: data from Askill, J.,in Handbook of Chemistry and Physics, 55th ed.,Weast, R.C., Ed., CRC Press, Cleveland,1974, F61.
©2001 CRC Press LLC
(cm2 • s–1)
1.04 x 10–9 1.66 x 10–7 4.8 x 10–7 2.9 x 10–8 1.92 x 10–7 3.58 x 10–7 0.09 3.45 x 10–7 0.245 6.05 x 10–8
Table 84. DIFFUSION IN METALLIC (SHEET 3 OF 34)
SYSTEMS * Activation energy, Q (kcal • mol–1)
Frequency factor, D o
Metal
Tracer
Crystalline Form
Purity (%)
Temperature Range (˚C)
Aluminum (con’t)
Zn65
S
99.999
357–653
28.86
0.259
Beryllium
Ag110
S⊥c
99.75
650–900
43.2
1.76
Ag110
S||c S⊥c
99.75 99.75
650–900 565–1065
39.3 37.6
0.43 0.52
S||c S P
99.75 99.75
565–1065 700–1076 800–1250
39.4 51.6 58.0
0.62 0.67 0.2
S S S
99.99 99.95 99.99
180–300 110–283 180–300
25.4 19.3 19.0
2.21 0.14 0.0016
Be7 Be7 Fe59 Ni63 Cadmium
Ag110 Cd115 Zn65
Source: data from Askill, J.,in Handbook of Chemistry and Physics, 55th ed.,Weast, R.C., Ed., CRC Press, Cleveland,1974, F61.
©2001 CRC Press LLC
(cm2 • s–1)
Table 84. DIFFUSION IN METALLIC (SHEET 4 OF 34)
Metal
Tracer
Calcium
C14 Ca45 Fe59
Purity (%)
Temperature Range (˚C)
Activation energy, Q (kcal • mol–1)
Frequency factor, D o
99.95 99.95 99.95 99.95 99.95
550–800 500–800 500–800 550–800 500–700
29.8 38.5 23.3 28.9 34.8
3.2 x 10–5 8.3
⊥c ||c
750–1050 2000–2200 540–920 750–1060
64.3 163 47.2 53.3
9280 5 102 2.2
⊥c ||c ⊥c ||c
1400–2200 1800–2200 140~2200 1400 1820
145.4 114.7 115.0 129.5
1.33 x 10–5 2.48 6760 385
Crystalline Form
63
Ni U235 Carbon
Ag110 C14 Ni63 Ni
63
Th228 228
Th U232 U232
SYSTEMS *
⊥c
Source: data from Askill, J.,in Handbook of Chemistry and Physics, 55th ed.,Weast, R.C., Ed., CRC Press, Cleveland,1974, F61.
©2001 CRC Press LLC
(cm2 • s–1)
2.7 x 10–3 1.0 x 10–6 l.l x 10–5
Table 84. DIFFUSION IN METALLIC (SHEET 5 OF 34)
Metal
Tracer
Chromium
C14 Cr51 Fe59 Mo99
Cobalt
C14 Co60 Fe59 Ni63 S35
Copper
Ag110 76
As Au193 Cd115
Crystalline Form
P P P P P P P P P S, P P S, P S
SYSTEMS *
Temperature Range (˚C)
Activation energy, Q (kcal • mol–1)
Frequency factor, D o
120–1500 1030–1545 980–1420 1100–1420
26.5 73.7 79.3 58.0
9.0 x 10–3 0.2 0.47
99.99
600–1400 1100–1405 1104–1303 1192–1297 1150–1250
34.0 67.7 62.7 60.2 5.4
0.21 0.83 0.21 0.10 1.3
99.98
580–980 810–1075 400–1050 725–950
46.5 42.13 42.6 45.7
0.61 0.20 0.03 0.935
Purity (%)
99.98 99.8
99.82 99.9 99.9
Source: data from Askill, J.,in Handbook of Chemistry and Physics, 55th ed.,Weast, R.C., Ed., CRC Press, Cleveland,1974, F61.
©2001 CRC Press LLC
(cm2 • s–1)
2.7 x 10–3
Table 84. DIFFUSION IN METALLIC (SHEET 6 OF 34)
Metal
Tracer
Copper (Con’t)
Ce141 Cr51 Co60 Cu67 Eu152 59
Fe Ga72 Ge68 Hg203 Lu177 54
Mn Nb95
Temperature Range (˚C)
Activation energy, Q (kcal • mol–1)
Frequency factor, D o
766–947 800–1070 701–1077 698–1061
27.6 53.5 54.1 50.5
2.17 x 10–3 1.02 1.93 0.78
99.998
750–970 460–1070 _ 653–1015
26.85 52.0 45.90 44.76
1.17 x 10–7 1.36 0.55 0.397
44.0 26.15 91.4 60.06
0.35
99.999 99.99 99.999
_ 857–1010 754–950 807–906
Crystalline Form
Purity (%)
P S, P S S
99.999
P S. P
99.999
S P P S P
SYSTEMS *
99.998 99.999
Source: data from Askill, J.,in Handbook of Chemistry and Physics, 55th ed.,Weast, R.C., Ed., CRC Press, Cleveland,1974, F61.
©2001 CRC Press LLC
(cm2 • s–1)
4.3 x 10–9 107 2.04
Table 84. DIFFUSION IN METALLIC (SHEET 7 OF 34)
Metal
Tracer
Copper (Con’t)
Ni63 Pd102 Pm147 195
Pt
S35 124
Sb Sn113 Tb160 Tl204 Tm170 Zn65
Crystalline Form
P S P P
Purity (%)
99.999 99.999
SYSTEMS *
Temperature Range (˚C)
Activation energy, Q (kcal • mol–1)
Frequency factor, D o
620–1080 807–1056 720–955 843–997
53.8 54.37 27.5 37.5
1.1 1.71
49.2 42.0 45.0 27.45
8.96 x 10–9
43.3 24.15 47.50
7.28 x 10–9 0.73
S S P P
99.999 99.999 99.999
800–1000 600–1000 680–910 770–980
S P P
99.999 99.999 99.999
785–996 705–950 890–1000
Source: data from Askill, J.,in Handbook of Chemistry and Physics, 55th ed.,Weast, R.C., Ed., CRC Press, Cleveland,1974, F61.
©2001 CRC Press LLC
(cm2 • s–1)
3.62 x 10–8 4.8 x 10–4
23 0.34 0.11
0.71
Table 84. DIFFUSION IN METALLIC (SHEET 8 OF 34)
Metal
Tracer
Germanium
Cd115 Fe59 Ge71 In114 Sb124 125
Te Tl204 Gold
Ag110 198
Au Co60 Fe59
SYSTEMS *
Temperature Range (˚C)
Activation energy, Q (kcal • mol–1)
Frequency factor, D o
S S S S
750–950 775–930 766–928 600–920
102.0 24.8 68.5 39.9
1.75