THEORETICAL ACOUSTICS OF UNDERWATER STRUCTURES
This page is intentionally left blank
THEORETICAL ACOUSTICS OF UNDERWATER STRUCTURES
E A Skelton Imperial College, UK
J H James
Imperial College Press
Published by Imperial College Press 516 Sherfield Building Imperial College London SW7 2AZ Distributed by World Scientific Publishing Co. Pte. Ltd. P O Box 128, Fairer Road, Singapore 912805 USA office: Suite IB, 1060 Main Street, River Edge, NJ 07661 UK office: 57 Shelton Street, Covent Garden, London WC2H 9HE
British Library Cataloguing-in-Publication Data A catalogue record for this book is available from the British Library.
THEORETICAL ACOUSTICS OF UNDERWATER STRUCTURES Copyright © 1997 by Imperial College Press All rights reserved. This book, or parts thereof, may not be reproduced in any form or by any means, electronic or mechanical, including photocopying, recording or any information storage and retrieval system now known or to be invented, without written permission from the Publisher.
For photocopying of material in this volume, please pay a copying fee through the Copyright Clearance Center, Inc., 222 Rosewood Drive, Danvers, MA 01923, USA. In this case permission to photocopy is not required from the publisher.
ISBN 1-86094-085-4
This book is printed on acid-free paper.
Printed in Singapore by Uto-Print
V
CONTENTS
PREFACE ACKNOWLEDGEMENTS
xi xiii
INTRODUCTION
1
1 MATHEMATICAL M E T H O D S
7
1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11
Fourier Series Fourier Transforms Delta Functions Vector and Scalar Identities Integral Theorems Bessel Functions Spherical Bessel Functions Legendre Functions Stationary Phase Matrices Numerical Integration
7 9 11 14 18 19 23 26 28 30 34
2 R E S P O N S E OF D Y N A M I C A L SYSTEMS 2.1 Time-Harmonic Response 2.2 Transient Response 2.3 Time-Harmonic Power Flow
43 43 47 55
3 ACOUSTIC EQUATIONS 3.1 Differential Equation 3.2 Plane Wave Solutions 3.3 Green's Function in Cartesian Coordinates
61 61 66 67
VI
3.4 3.5 3.6 3.7 3.8
Green's Function in Cylindrical Coordinates Green's Function in Spherical Coordinates Arbitrary Source Distribution Arbitrary Boundaries Helmholtz Integral Equation
70 73 75 77 77
4 SCATTERING FROM H A R D A N D SOFT S T R U C T U R E S 4.1 Planar Surface 4.2 Spherical Surface 4.3 Cylindrical Surface 4.4 Axisymmetric Slender Body 4.5 Monopole in Axisymmetric Channel
83 83 88 92 97 106
5 ACOUSTIC FINITE ELEMENTS 5.1 Variational Principle 5.2 Finite Element Discretization 5.3 Acoustic Finite Elements 5.4 Radiation Boundary Condition 5.5 Sources of Sound 5.6 Axisymmetric Elements
115 115 119 121 123 125 126
6 ELASTIC EQUATIONS A N D CONSTITUTIVE RELATIONS 133 6.1 Strain and Stress 133 6.2 Isotropic Displacement Equations 136 6.3 Finite Element Variational Principle 140 6.4 Fluid Constants 144 6.5 Isotropic Elastic Constants 144 6.6 Anisotropic Solid -. 148 6.7 Unidirectional Fibre Reinforcement 150 6.8 Thin Layered Composite 151 6.9 Local to Global Transformation 155 6.10 Effective Constants of Symmetric Stack 159 7 ACOUSTICS OF SPHERICAL SHELL 7.1 Equations of Motion 7.2 Mechanical Excitation
163 163 165
vii 7.3
Acoustical Excitation
171
8 ACOUSTICS OF THIN PLATE 8.1 Equations of Motion 8.2 Mechanical Excitation 8.3 Monopole Excitation 8.4 Plane Wave Excitation 8.5 Transient Sound Radiation 8.6 Frame and Bulkhead Stiffened Plate 8.7 Orthogonally Stiffened Plate 8.8 Plate with Point Attachments 8.9 Parallel Plates with Attachments 8.10 Plate with Periodic Resonators
179 179 180 189 191 193 198 207 213 221 228
9 ACOUSTICS OF CYLINDRICAL SHELL 9.1 Equations of Isotropic Shell 9.2 Equations of Anisotropic Shell 9.3 Mechanical Excitation 9.4 Monopole Excitation 9.5 Plane Wave Excitation 9.6 Periodic Rib Stiffening 9.7 Axisymmetric Attachments 9.8 Fluid Coating
241 241 244 246 253 259 263 273 278
10 SPHERICALLY LAYERED MEDIA 10.1 Introduction 10.2 Acoustic Fluid Layer 10.3 Isotropic Elastic Layer 10.4 Viscous Fluid Layer 10.5 Assembly of Elements 10.6 Mechanical Excitation 10.7 Acoustical Excitation 10.8 Numerical Examples
283 283 284 287 291 293 294 295 297
vm
11 P L A N A R L A Y E R E D M E D I A
301
11.1 Introduction
301
11.2 Acoustic Fluid Layer
303
11.3 Isotropic Elastic Layer
305
11.4 Orthotropic Elastic Layer
311
11.5 Viscous Fluid Layer
317
11.6 Assembly of Elements
319
11.7 Mechanical Excitation
320
11.8 Monopole Excitation
325
11.9 Plane Wave Excitation
329
l l . l O L o w Frequency Sound Propagation
333
12 C Y L I N D R I C A L L Y L A Y E R E D M E D I A
343
12.1 Introduction
343
12.2 Acoustic Fluid Layer
345
12.3 Isotropic Elastic Layer
347
12.4 Orthotropic Elastic Layer
354
12.5 Viscous Fluid Layer
359
12.6 Assembly of Elements
361
12.7 Mechanical Excitation
362
12.8 Monopole Excitation
366
12.9 Plane Wave Excitation
369
13 S I M P L Y S U P P O R T E D C Y L I N D E R
373
13.1 Isotropic Thin Cylinder
373
13.2 Point Force Excitation
376
13.3 Plane Wave Excitation
381
13.4 Anisotropic Layered Cylinder
385
14 F I N I T E A X I S Y M M E T R I C S T R U C T U R E
395
14.1 Introduction
395
14.2 Fourier Series
397
14.3 Helmholtz Integral Equation
397
14.4 Far Field Acoustics
403
14.5 Fluid-Structure Equations
406
14.6 Conical Shell Finite Element
408
ix 14.7 Axisymmetric Solid Finite Element 14.8 System Dynamic Stiffness 14.9 Numerical Examples
414 420 423
LIST OF COMMONLY O C C U R R I N G SYMBOLS
429
INDEX
433
This page is intentionally left blank
XI
PREFACE
T h e m a t h e m a t i c s of sound radiation from, and sound scattering by, elastic structures has received much attention in the latter half of this century due to its relevance to the problem of detecting and classifying submarines and other submersibles. T h e theoretical work described herein is substantially a compilation of our research interests for the Navy on the acoustics of basic elastic struc tures excited by mechanical forces and acoustic sources. It is not intended as a comprehensive t r e a t m e n t of the subject for which even a list of textbooks and research publications is far too lengthy to record here. The standard reference work on theoretical structural acoustics is the textbook "Sound, Structures, and Their Interaction", published by the M I T Press, and authored by Junger & Feit. T h e Journal of Sound and Vibration and the Journal of the Acoustical Society of America are the main repositories of refereed papers. While the textbook has been written primarily as a reference work at a postgraduate level, experience has shown t h a t undergraduates are well able to cope with most aspects provided they are supervised accordingly. The theo retical methods, developed originally for Naval noise control problems, should also find civil application in the acoustic modelling of novel structures fabricated from b o t h fibre reinforced and isotropic materials, such effort being increasingly desirable and necessary in this noisy world. The textbook should be a useful source of information for those scientists who need to develop skills in theoretical a n d / o r numerical modelling in dynamics and acoustics, and it is hoped t h a t it will also be a profitable source of material for scientists whose research interests lie elsewhere in continuum mechanics. T h e first edition of any sizeable mathematical publication is likely to contain algebraic and typographical errors.
T h e responsibility for those here is ours
alone. When formulae are extracted from published literature it is generally advisable to check t h e m against originals and also, if possible, to re-work the mathematics.
xii
E.A. Skelton Mathematics Department Imperial College of Science, Technology and Medicine London, SW7 2BZ
J.H. James Brynteg House, High Street Mountain Ash Mid Glamorgan, CF45 3PB
May 1997
xm
ACKNOWLEDGEMENTS
Much of the work described here is contained in Ministry of Defence tech nical reports and m e m o r a n d a written by the authors and colleagues over the years 1974-1994. Our thanks to the Procurement Executive, Ministry of De fence for providing funding for t h a t research as part of an underwater acoustics research p r o g r a m m e . T h e Defence Research Agency provided access to reports and software, for which we are grateful to C.J. Jenkins, D. Ealey and librarian J. Sawyer. Particular thanks are due to E.J. Clement who ably has assisted us over the years. Work done with ex-colleagues S.J. Ansley, G. Jones and V. Burke is also included here. Students J o h n Melotte, Julie Pestell, William Spicer, Sherrie Lester, Nicola W h i t e and J a m e s Mason worked gainfully during their sum mer vacations. Navy scientists A.L. Kendrick, G. Barber, J. Cook, A.N. Hicks, D. Emery, G. Alker, A. Baird, G. Jones, A. James, and C. Jenkins have sup ported a background of theoretical modelling as a necessary and valuable input to applied research programmes. T h e research output of University scientists has also provided a worthy contribution: B.R. Mace, M. Petyt, C.R. Fuller and F.J. Fahy, working at the Institute of Sound and Vibration Research, have pro vided quality research on wave propagation in fluid-loaded plates and shells; I.C. Mathews and research students at Imperial College have provided up to date expertise in finite element analysis of
fluid-structure
interaction problems.
A . G . P W a r h a m , G . F . Miller, R. Borland and A.J. Burton, at the National Physi cal Laboratory, have always been happy to take on difficult theoretical problems. We are grateful to the publisher Academic Press Limited London for permission to use material from certain papers published in The Journal of Sound and Vi bration. Finally, we apologize to those who perceive t h a t their work has been omitted or not properly acknowledged; it sometimes can be difficult to attribute credit a n d / o r priority because similar work has sometimes been carried out in m a n y research organizations, and not always published in refereed journals or publicly released technical reports.
INTRODUCTION
The acoustic characteristics of a ship, building or machine are likely to be but one of a number of sometimes conflicting requirements of an engineering or building project. Nonetheless, because it is likely to retain some importance, there will be some acoustic objective to be achieved subject to various constraints such as cost and operational requirements. Generally, theoretical modelling as well as experimental testing should be built into an acoustic design procedure, the former being particularly valuable because it increases the range of options which can be assessed while at the same time helping to reduce the chances of introducing unwanted acoustic features, particularly in structures of novel design and/or new materials. It is the role of an acoustician to provide theoretical modelling support, either for paper assessment studies or for experimentally based structural and materials research programmes. To effectively provide this support it is desirable for an analyst to have access to a wide range of theoretical tools, in both textbook and software form, and to be experienced in their use. These tools can then be used as basic building blocks for solving more complex acoustical problems, and can also be used as examples of how new building blocks can be developed. Thus, herein are provided many of the basic building blocks for modelling the dynamics and acoustics of underwater elastic structures, and it will be found that many of the models described can also find a wide range of applicability in the field of architectural acoustics. A single theoretical model for covering very low to very high frequency structural acoustics, 0.1 Hz to 100 kHz, say, is entirely impractical due to the restrictions imposed by the limited speed of current computers. Even if such a model were possible, the computer output would not help greatly with physical understanding of the wave processes involved. However, when the solution of a problem appears to be somewhat intractable, the way forward is to solve simple substitute problems from which, it is hoped, qualitative predictions and physical insight will emerge. These substitute problems can turn out to be basic building 1
Acoustics of Underwater Structures
2
blocks. T h e art of noise and vibration modelling is to select and enhance those models which yield the required information in a cost effective way. Thus, a layered approach to modelling is desirable. At the concept stage of an engineer ing project the acoustic modelling should be based on uncomplicated models with a m a x i m u m of physical understanding and a minimum of computational detail; these are called fundamental models and they are used for making qual itative predictions. It is essential t h a t the concept stage is properly researched and documented because a bad concept can result in acoustical problems in the prototype. At the design stage more elaborate models are required and certain quantitative predictions will be found desirable; these are called phenomenological models. At the prototype stage finite element models may be needed, even if only to avoid lengthy experimentation; these are called one-to-one models. Con tained herein are a wide range of acoustic models covering fundamental models, through phenomenological models, to a simple one-to-one model based on the finite element m e t h o d and the Helmholtz integral equation. T h e m a t h e m a t i c a l utilities necessary for solving problems in theoretical acoustics are s t a n d a r d to courses in classical mathematical physics. As a re fresher, Chapter 1 gives certain formulae obtained from the theory of Fourier integral transforms and their stationary phase asymptotic approximation, delta functions, vector and scalar identities, integral theorems, Bessel and Legendre functions, matrices and numerical integration. This is followed in Chapter 2 by a brief description of the time-harmonic response, transient response and mechan ical power flow in dynamical systems. T h e foundations for the acoustic theory used herein are set out in Chapter 3 in which the acoustic wave equation is de rived in a simple way. There follows separated solutions of the wave equation, plane wave expansions and free-space Green's functions in cartesian, cylindrical and spherical coordinate systems. In later chapters the plane wave is the basic excitation used to described the transmission and reflection properties of elas tic structures, and the Green's function, approximating to a localized source of sound, can be used to construct more complex sound sources, either directly or via the Helmholtz integral equation which is central to numerical acoustics. A m o n g the canonical problems of acoustics are those for the scattering of sound by h a r d or soft spherical, planar and cylindrical boundaries which are ensonified by plane waves or pressure fields from acoustic monopoles located near to the boundaries.
Closed-form solutions, developed in Chapter 4, are
Introduction
3
used in later chapters as part of the solution when elastic effects are included. Also considered in Chapter 4 is an approximate treatment of sound scattering from a finite axisymmetric body and an exact solution for the sound field in an axisymmetric channel, these two models being examples of how the free-space Green's function can be used as a building-block. For awkward geometries, for which closed-form expressions are impractical, acoustic finite elements can be used to solve low frequency problems, as considered in Chapter 5. Here, after some discussion of variational principles for solving linear field problems, simple axisymmetric acoustic finite elements are developed, which can, for example, be used to investigate the sound radiation characteristics of sound sources in circular ducts. For most practical problems the elastic response of a structure must be ad dressed. This is particularly i m p o r t a n t in underwater acoustics as the mechani cal loading terms stemming from the surrounding fluid are generally comparable to a structure's mass and stiffness. In Chapter 6 are obtained the displacement differential equations of linear elasticity for isotropic materials. These are de rived from strain, stress equilibrium and stress-strain relations which are given in cartesian, cylindrical and spherical coordinates. The equations in the various coordinate systems are reduced to wave equations by means of simple substitu tions, so t h a t well-established solution methods for wave equations are equally applicable to elastic equations. There follows a general variational principle on which the finite element method, used in later chapters, is based.
A section
on the elastic constants of an isotropic elastic solid is accompanied by a ta ble of Young's modulus, Poisson's ratio and density for a variety of materials. T h e constitutive m a t r i x is a 6 x 6 m a t r i x which relates the stress vector to the strain vector. For an isotropic material its m a t r i x elements are formed from two constants, but for an anisotropic material there are up to twenty one different constants. It is shown how a certain mixture theory can be used to find the effective orthotropic elastic constants required for fibre reinforced material, how effective elastic constants can be obtained for a stack of fibre reinforced layers comprising a thin shell or a thick three-dimensional solid, and how a constitutive m a t r i x can be transformed from a local axes set, in which one or more axis is parallel to a fibre direction, to a global axes set. T h e spherical shell is the only finite geometry for which simple closed-form solutions are available for its vibration, sound radiation and sound scattering.
Acoustics of Underwater Structures
4
This is the baseline problem of fluid-structure interaction. In Chapter 7, closedform expressions are obtained for the sound radiation from a spherical shell excited by a point force, and the sound scattered by the shell when it is excited by a plane wave or monopole acoustic source. Plots of intensity vectors demon strate the considerable distortion in an acoustic field when a structure is excited at a resonant frequency. The most extensively studied fluid-structure system, driven by mechanical forces and acoustic sources, is perhaps a uniform infinite plate with attached nonuniformities such as periodically spaced ribs or arbitrary arrangements of point attachments.
This system is considered in Chapter 8.
It contains the essential physics of wave propagation in fluid loaded structures, and this can be extracted with minimal computation. The non-uniformities on the otherwise uniform plate act as secondary sources of acoustic radiation and their presence considerably can enhance or reduce sound radiation. In certain circumstances resonators attached to plates can be used as sound absorbing de vices, and it is shown how simplified "lumped parameter" methods can be used to obtain simple formulae for studying the effect of uniform distributions of res onators embedded in different types of plate cavity. In Chapter 9 the complicated differential equations of motion of thin isotropic and anisotropic cylinders are given. These are solved, for an infinite cylinder with both interior and exterior fluid loading, by using standard Fourier series and integral transform methods. T h e effects of periodically spaced ribs and finite numbers of axisymmetric con straints are also considered. Because the ribs on a shell are usually deep, such as those T-ribs found inside a pressure hull, it is generally necessary to account for deformation of their cross-sections, which can be achieved by using the finite element m e t h o d to model the ribs. Finally, it is shown how a coating, modelled as a fluid, can be attached to the outer surface of an infinite cylinder. The coat ing simulates an anechoic coating for absorbing sound waves from an exterior noise source, or a decoupling coating for isolating mechanical vibrations from a surrounding fluid. In Chapters 10-12 is considered the acoustics of spherically layered media, infinite planar layered media and cylindrically layered media. Each layer can be an acoustic fluid satisfying the acoustic wave equation, a viscous fluid satisfying the Navier-Stokes equations, or an isotropic/anisotropic elastic solid satisfying the equations of elasticity. T h e layers are represented by spectral dynamic stiff ness matrices which relate surface displacements and stresses. The layers are
Introduction
5
combined to form the layered system m a t r i x by the method of dynamic stiffness coupling, which is a m a t r i x method for combining finite element matrices to form a structure m a t r i x . Numerical solution of the system matrix leads to the solution of the problem of sound transmission through layered systems when the excitation is a plane wave, and the far field sound radiation when the excitation is a mechanical force or a monopole acoustic source. For the case of planar layered media, the problem of low frequency sound propagation in the ocean, with a lay ered seabed, is extracted as a special case. Sound transmission through layered media is a canonical problem in both underwater and architectural acoustics; the addition of a capability to include fibre reinforced composites provides a major enhancement of applicability because high-strength, lightweight, fibre re inforced materials are increasing being used as components in the construction of buildings and underwater submersibles. In Chapter 13 the acoustic behaviour of a simply supported finite cylinder is considered. This is a relevant geometry because it approximates to a compart ment in an underwater submersible. Two cases are considered: the first is for which the cylinder is modelled by using the thin shell theory of Chapter 9; the second is for which the cylinder is modelled as a layered composite by using the layered media theory of Chapter 12. Numerical results show the considerable enhancement of sound t h a t occurs when the excitation frequency coincides with a resonant frequency, both for the separate cases of point force and plane wave excitation. Finally, in Chapter 14, the acoustics of a finite axisymmetric structure sub ject to plane wave or point force excitation is considered. T h e finite element m e t h o d is used to model the structure by using conical shell finite elements or by using axisymmetric solid finite elements, both of which can be fibre re inforced layered composites. T h e exterior fluid is modelled by the Helmholtz integral equation which is a relation between the acoustic pressure in a fluid and a surface vibration which is the cause of the acoustic disturbance. This type of modelling increasingly will be used for practical structures; it is the direction of much leading-edge research aimed at software packages for solving large scale fluid-structure interaction problems. T h e model described herein is useful for certain low frequency sound radiation studies, where, for example, the propul sion system and associated machinery in an underwater submersible can cause large structural vibrations.
6
Acoustics of Underwater Structures
Fortran computer programs have been written for obtaining numerical pre dictions of the acoustics of the dynamical systems considered here, but program ming and numerical details are not considered in the text. However, numerous numerical examples are given of both time-harmonic and transient pressure fields stemming from mechanical and acoustical excitation of structures. These are an aid to physical insight and provide benchmark computations of sound radiation and sound scattering which can be of particular value to those scientists, who, by being users of software packages, provide numerical modelling support and consultancy.
CHAPTER 1. MATHEMATICAL METHODS
1.1
Fourier Series
If f(x) is defined in the interval (a, 6) and is also periodic with period 6— a, viz. f(x + 6 — a) — / ( # ) , then a Fourier series may be defined as an cos o— a n=0
where an
=
h V^ bn sin , *-^ o—a
(1-1.1)
n=l
—^— / f(x)cosdx, o- a Ja b- a
— / /(x)sin^dx, (1.1.2) » - a Ja b- a with e n = 1 for n = 0 and e n = 2 otherwise. Because the functions are periodic the limits of integration may be changed from (a, 6) to (ao,ao + 6 — a). The Dirichlet conditions, viz. f(x) is single valued except at a finite number of points in (a, 6) and f(x) and f'(x) are continuous except at the discontinuities, are a sufficient but not necessary condition for the Fourier series to exist and to converge to f(x) if x is a point of continuity, and to converge to [/(#+)+/(#_ )]/2 if x is a point of discontinuity. The notation x+ and x~ refers to values of x on the right and left, respectively, of the discontinuity. For a half range Fourier sine series of the odd function f(x) — —/(—#), set a = —L and b — L and note that an — 0 and the integral for 6n is twice the value in Eq. (1.1.2) with limits (0, L). For a half range Fourier cosine series of the even function f(x) = f(—x), set a = —L and b — L and note that bn = 0 and the integral for a n is twice the value in Eq. (1.1.2) with limits (0, L). bn
=
7
8
Acoustics of Underwater Structures
A complex notation is usually desirable when solving certain equations of m a t h e m a t i c a l physics and engineering. Thus,
J2 c " e x P y r 7 '
f(x)=
(L1-3)
n = —oo
where cn = b-
1
fb <-, x —Yl-Knx . / /(zexp — da:. a Ja b-a
/* + A\ (1.1.4)
T h e relations between the coefficients are these: for n = 0, CQ — a^\ for n > 0, cn - 0.5(a n - i6 n ), c _ n = 0.5(a n + i6 n ), an - cn + c _ n , 6 n = i(c„ - c _ n ) . A Fourier series of the function f{<j>) defined over the range (0, 27r) is frequently required, in which case the formulae are valid provided x =
, a = 0 and 6 = 2ir. Another case of interest is the time function f(t)
defined over the range ( 0 , T ) ;
here set x — t, a = 0 and b = T. Parseval's relation for the functions f(x)
and g(x), represented by the com
plex Fourier series of Eq. (1.1.3) with coefficients cn and d n , respectively, is oo
b
f*(x)g(x)dx
/
= (b-a)
T
c*ndn,
(1.1.5)
n = — oo
where the asterisk superscript denotes complex conjugate. A special form of the Fourier series is appropriate to "simply supported", f(-L)
= f(L)
= f"(-L)
= f"(L) f(x)
= 0, boundaries at ( - L , L), viz.
= J2bnsm
\
r
21
',
(1.1.6)
n= l
where n =
1 [ Lj
r, / W
. . Sm
rnr(x + L) , 2L
, ( L L 7 )
Generalization of Fourier series to more than a single dimension is straight forward. For example, for the two-dimensional periodic function f(x,y)
defined
in the range (a, b) in the ^-direction and the range (c,d) in the ^-direction, CO
/(*>!/) =
V
CO
V
m = —oo n = —oo
cmnexp-
exp-—-,
(1.1.8)
Mathematical Methods
9
where 1
1
fd fb ti
^
-ilvmx
-i2irnj/J
°™ = Jjb^JdZj Je Ja f^y^P-^r^^ZT^^dy. 1.2
3
„ , „x
(1.1.9)
Fourier Transforms
If f(x) is defined and is absolutely integrable in the interval (-oo,+oo), then its Fourier transform or spectral form, F(a), is defined by the equations /+°°
1 f(x) = —
F(a)exp(iaz)da,
(1.2.1)
and /-pOO
f(x)exp(-iax)dx.
(1-2.2)
■CO
The Dirichlet conditions, viz. f(x) is single valued except at a finite number of points in (a, 6) and f(x) and f'(x) are continuous except at the discontinuities, are a sufficient but not necessary condition for the Fourier integral in Eq. (1.2.1) to exist and to converge to f(x) if a; is a point of continuity; and to converge to [/(#+) + / ( * _ ) ] / 2 if * ^ a point of discontinuity. An alternative representation of the Fourier transform pair is also in common use, viz. /+oo •oo
and
/+oo -co
ra(a)exp(2xiax)da,
(1.2.3)
ja{X) exp(—zwuyx)Q.x.
yi.2.^ij
Interchanging between the two versions is accomplished by noting that /(*) = /„(*) and F(a) = Fa(a/2*) are the transform pair m the first system. ParsevaPs relation for the functions f{x) and g?x) whose transforms are F(a) and G(a) is /+oo
-j
f*(x)g(x)dx=■CO
r+OO
F*(a)G(a)da.
(1.2.5)
Acoustics of Underwater Structures
10
The convolution theorem states that the Fourier transform of the convolu tion, -foo
f(u)g(x - n)dii,
/
(1.2.6)
-oo
is simply C(a) = F(a)G(a). The convolution obeys the commutative, associa tive and distributive rules of algebra. Two other useful relations comprise the generalized Poisson summation for mula, oo
1
J2
f(x-nd)=-
oo
d ^
F(2Trn/d)exp(2mnx/d),
(1.2.7)
n = — oo
and
oo
^
^2
f(nd)exp(-iand)
oo
= - ^ d
F(a + 2irn/d).
(1.2.8)
n = — oo
These formulae are of prime importance when analyzing periodic systems, and they can also be useful for converting a slowly convergent series to a rapidly converging series. For example, the second formula, with a = 0, can be used to show that oo
i—
exp(-n2d2)
J2
= ^
d
oo
J2
exp(-ir2n2/d2)
(1.2.9)
n = — oo
when the transform pair f(x) = exp(—x2) and F(a) — yJH. exp(—ct2/4) is used. The series on the left converges slowly for small c?, while the series on the right converges rapidly. Generalization of the Fourier transform to more than a single dimension is straightforward. For example, for the two-dimensional Fourier transform, the function f(x,y) and its transform F(a,f3) are defined as follows, i
r+oo
y+oo
f(x>y) = T~5 ^T
/ J — oo
F(a,/3)exp(iax
+ ipy)dad(3,
(1.2.10)
J — oo
and +oo
/
/»+oo
/ -oo
f{x,y)exp{-iax
ParsevaPs relation for the functions f(x,y) +oo
/
/*+oo
/ -oo
J — oo
-i(ly)dxdy.
(1.2.11)
J — oo
-j
r(x,y)g(x,y)dxdy=-1 ^^"
and g(x,y) is /♦-f-oo
/*-foo
/
/
J — oo
J — oo
F*(a,p)G(a,
P)dadp, (1.2.12)
Mathematical Methods
11
and the Poisson summation formula is CO
CO
XI X f(x ~mdx^y-ndy) = m = —oo n = —oo .j
CO
CO
—jdxdv
2^
22
FC^nm/dx, 27rn/dy) exp{2iri(mx/dx
+
ny/dy)}.
* m = —co n — — oo
(1.2.13) In a cylindrical coordinate system (r, yz) an integral transform in the z direction and a series transform in the <j> direction is the most appropriate de composition. Thus, for a field variable /(r, ,z), f(r,
^^
exp(in^) /
F(r, n, a)exp(iaz)da,
(1.2.14)
/(r, 0, z)exp(-iaz)d2rd0.
(1.2.15)
and I
r27r
F(r, ra,a)= — / ^
Jo
y+co
exp(-in^) / J-oo
The variant of the Parseval formula for the field variables /(r, ^, z) and g(r, <j>, z) is +oo
/
p2ic
/ -co
°°
f*(r,(l>,z)g(r,(f))z)d<j)dz=
JO
^ n =
y*+co
/
F*(r, n, a)G(r, n , a ) d a .
_00J-oo
(1.2.16) 1.3
Delta Functions
The Dirac delta function has a preeminent place in mathematics due to its simplicity and its usefulness for facilitating integral transform solutions of the equations of mathematical physics. It is a representation of a point source forcing function which leads to a Green's function, viz. the response of a system at field point i due to unit excitation at field point j . Some Green's functions of the reduced acoustic wave equation are derived in Chapter 3. Here, basic properties and some useful formulae involving delta functions are given.
Acoustics of Underwater Structures
12
Table 1.1: Some s t a n d a r d Fourier transform pairs. defined in §1.3.
/(*) d" xnf(x) S(x - x0) exp(iao#) f(ax)exp(ibx) { li \x\ < a \ 0, \x\ > a cos(ao^)
The delta function S is
F(a) (ia)nF(a) dn dan v J exp(—ixoa) 27r6(a — ao) -F((a-b)/a) a 2 sm(aa) a 7r{S(a + a 0 ) + S(a - a 0 )}
exp(-a0|z|)
i7r{<5(a + a 0 ) - <5(a - a 0 )} 2a 0 2 a + ag
exp(—alx 2 )
^exp(-a2/4a2)
—^ -,Re.a > 0 l x + a1 X —^——^,Re.a > 0 l x -f cr
— exp(—aasgna)
sin(aotf)
— (i7rsgna) exp(—aasgna)
1
Mathematical Methods
13
The delta function 6(x), which is a generalized function, exists by virtue of its sampling property. If f(x) is continuous in the neighbourhood of the point x — #o, then +00
f(x)6(x-x0)dx
/
= f(x0),
(1.3.1)
which can immediately be extended to cover derivatives and finite limits of integration, viz. fb
(
n
/ f(x)S < \x Ja
[ (-l)n/(n)(z0), - x0)dx = <. 0, { 0.5(-l)n/(n)(*o),
a<x0b, x0 = aoixo = b,
(1.3.2)
where the symbol (n) denotes the nth derivative. When XQ coincides with a limit of integration then there are compelling reasons for interpreting the integral as above, but caution should be exercised in this case. The delta function 6(x) can thus be perceived to be an even function of x located at the origin; it is of zero width and infinite height, its area being unity. Such a function exists only by its properties, but it may be thought of as the limit of a sequence of functions 6k(x) as k —» 00. The functions 6lk(x) = k/7r(l +
fcV),
S2k(x) = (Jb/2)exp(-|fcx|),
2 2
hk = (&/\/7r)exp(-fc z ), dbk
S4k - sin(kx)/irx, / Jb if |a?|l/2k1
~
tek =
(k/2)^±^-(2/kxrjn(kx)^1.3.3)
for k = 1,2,... are each such sequences. In the above formulae, J n is the standard Bessel function of order n. Generalized functions have a number of useful properties, among which are S(-x) = 6(x), n n
6'(-x) =
x ^ \x)
=
f(x)6'(x)
=
f(xQ)8(x-x0) 6(ax + b)
-6'(x),
n
(-l) n\S(x), f(0)6'(x)-f'(0)6(xl
=
f(x)S(x
-x0),
=
6(x + b/a)/\a\,
Acoustics of Underwater Structures
14
= (d/dx)\x\ = sgn(x), a
(d/dx)\x\
y ^ "TTT—rr, sum over real roots f(x), x
V
l/( »)l
(d/dx)sgn(x) =
aWhgnix),
— 2<$(x), for a > - 1 .
(1.3.4)
From the Poisson summation formula, Eq. (1.2.7), the following identity follows, oo
..
y ^ S(x — nd) — n = —oo
oo
^^
exp(27rinx/d),
(1.3.5)
n = —oo
which may be found useful when solving problems in which there is a periodic spacing of magnitude d. The delta function is required in three dimensions when solving physical problems. In the cartesian coordinate system, (x,yiz)i the delta function is defined as <5(x - x 0 ) - 6(x - x0)6(y - y0)S(z - z0) (1.3.6) for all (#0, yo, ^o)- In the cylindrical coordinate system, (r, >, z), the delta func tion is defined as 6(v - T0) = 6(r - r0)6( - <j>0)6(z - z0)/r
(1.3.7)
for all values of (ro, o, ZQ) except the following: at ro = 0 when <j>o is not defined, or when r = 0 in which case (j) is not defined, an appropriate axisymmetric two dimensional form of the delta function is 6(r)S(z — zo)/2irr. In the spherical coordinate system, (R, 0, ), the delta function is defined as <5(R - Ro) = 6{R - Ro)6(6 - 0O)<5(0 - 0)/R2 sin 0
(1.3.8)
for all values of (i^o,^o,^o) except the following: at R — 0 or Ro — 0 the spherically symmetric form is defined as b(R)/AnR?\ at #o = 0° or #o = 180° where o is not defined, or when 0 = 0° or 0 = 180° where <j> is not defined, an appropriate axisymmetric form is S(R — RQ)6(6 — 6o)/2irR2 sin 0. 1.4
Vector and Scalar Identities
In the cartesian (x,y, z), cylindrical (r,>,z), and spherical (R,6,<j)) coor dinate systems, defined in Figure 1.1 and Table 1.2, let $ be a scalar, and A
Mathematical Methods
15
a vector with components (Ax, Ay, Az), (Ar,A,Az), (AR, A$, AQ) in the said coordinate systems. The following definitions are then standard: ^T JT grad* = V *
=
/ a * d^ d^l dx _' dy_ ' dz_ dr ' r d<j>' dz
5^ 1 W
1
0»\
dR' RdO ' RsmO d<j)J di dl vA
= V.A =
(1-4.1)
1 ^ + ^ + ^
5x dy dz dAr Ar 1 dAA dAz + — +—?rr + dr r r d dz (dAR 2AR \_d
. „, ,
1
dA*\ (1.4.2)
curlA = V x A
=
dAz _ dAy dAx _ dAz 9Ay _ dAx dy dz ' dz dx dx dy 1 dAz dAA dAr dAz 1 d r d dz ' dz dr ' r dr (rAj) 1 d . 1 dA, Rsin0d0K (Af9 sin 0)' - Rsm9 d ' 1 dAR l1 «0 . n i . 1l «d , n i . i£sin# a>
18Ar r d
IdAi 1< 9^A (1.4.3)
_,. ,
JT ,
„2T
/ a 2 * a2* s 2 * \ d2^ dr2 fd2V \9R2 + +
199 l_d^ d2H>\ 2 2 r dr r d<j> dz2) ' 2 99 1 d ( . n99 2 . „ -^r sin 0 T : TTP: + R,-,-, RdR sin0 90 \ d0
*WW>
(L44)
Acoustics of Underwater Structures
16
Figure 1.1: Coordinate systems used: (r, , z) a n d (c) spherical (R,9,<j>).
(a) cartesian (x,y,z),
Table 1.2: Coordinate systems. | Cartesian
1
x
1
z
y
Cylindrical Spherical | x — r cos <j> x — Rsin9 cos<j> 1 y — r sin y — R sin 9 sin z —z z = R cos 9 1
(b) cylindrical
Mathematical Methods
17
A number of relations between the various quantities find frequent applica tion when solving physical problems. If ^ and $ are scalars and A and B are vectors, div(curlA)
0,
curl(grad^)
0,
div(tfA)
#divA + A.grad^,
curl(^A)
grad^ x A 4- ^curlA,
grad(A.B)
(A.grad)B + (B.grad)A + A x curlB + B x curlA,
div(A x B)
B.curlA — A.curlB,
curl(A x B)
(B.grad)A - B(divA) - (A.grad)B + A(divB),
2
tf V 2 $ + $V 2 tf + 2gradtf .grad$,
V (tf#) V2A
grad(divA) — curl(curlA).
(1.4.5)
The final relation in Eq. (1.4.5) is important because while V 2 operating on a scalar is straightforward, V 2 operating on a vector is not simply V 2 operating on the vector's separate components, except in cartesian coordinates. Thus, in cartesian coordinates V2A = ( V 2 ^ , V % , V 2 ^ ) .
(1.4.6)
In cylindrical coordinates V 2 A = ( V'A,
2 8A4 ,V%r2 d<j>
2 dAr 2 ,V AZ d(j>
+ r2
(1.4.7)
In spherical coordinates the expressions are much more complicated, VaA
■
(
dA, 2AR d (sin0Ae)R2sin0 d<j> R2 B?sm0d0 2 cos $ dA 2 2 2 + R sin 9 R sine d R2sin20 d
The reason for V 2 A not being equal to V 2 operating on its separate components arises from the definition of the vector A in the various coordinate systems, viz. A
=
exAx + e„Ay +ezAz,
in cartesian coordinates ,
Acoustics of Underwater Structures
18 A
=
erAr + e^A^ +ezAz,
A
=
CRAR
in cylindrical coordinates ,
-f egAo + e^A^, in spherical coordinates.
(1.4.9)
The unit vectors e are generally functions of the coordinates, viz. e , = (1,0,0), e r = (cos<^,sin^,0),
e y = (0,1,0),
e, = ( 0 , 0 , 1 ) ,
e^ = (—sin^, cos>, 0), ez = (0,0,1),
eR — (sin0cos>,sin0sin>, cos0), e$ = (cos 9 cos >, cos 9 sin 0, — sin 9), e^ = (—sin^,cos^,0).
(1.4.10)
Thus, the vector A is generally resolved into components whose directions are different at different field points. The operator V 2 can be applied directly to Eq. (1.4.9), provided the definitions of the unit vectors in Eq. (1.4.10) are used. The results of equations (1.4.6) to (1.4.8) follow. 1.5
Integral Theorems
By letting V be a volume bounded by a surface S with outward normal vector n, the identity / V . A d F = / A.ndS
Jv
(1.5.1)
Js
is known as the divergence theorem or Gauss's theorem. By letting S be an open surface, the opening being bounded by the curve C, then the integral formula £ A.dr = / ( V x A).ndS,
(1.5.2)
where r is the radius vector from the origin to the surface, is known as Stokes' theorem. The normal direction n is chosen so that the direction around the curve C is clockwise if viewed from the direction into which n points. The surface S could, for example, be a hemispherical shell bounded by the circular rim C. The planar version of this theorem for a closed curve C bounding an area S is
£ (A*d*+w)=ls(jt~
d
-w)dxdy'
(L53)
Mathematical Methods
19
where the integral is done in the anticlockwise direction. This relation is also known as Green's theorem in the plane. By letting \P and <£ be scalar fields existing in a volume V and on its surface 5, then Green's first and second identity are [ ^^-dS= Js on and
I ($V2tf+ V $ . W ) d V , Jv
/, (*§£ - *S) d 5 =X (*v2* - *v2$) dv'
(1.5.4)
(L5 5)
-
where d/dn is differentiation along the outward normal to S. 1.6
Bessel Functions
The Bessel functions Cn(z) are solutions of the homogeneous differential equation 2 & ^n
0(^
/ 2
2
+ * ^n + (z2-n2)Cn dz2 ' dz which arises from separable solutions, z
= 0,
#(r, >,z) = A(a,n)Cn(krr)exp(iaz)exp(in<j>))
(1.6.1)
(1.6.2)
of the reduced wave equation, V 2 \£ -\- k2^f = 0, in cylindrical coordinates, where kr — +\J{k2 — a 2 ) . The two independent solutions of Eq. (1.6.1) are the Bessel function of the first kind Zn(z) and the Bessel function of the second kind Yn(z). Bessel functions of the third kind, viz., H ^ ( * ) = J n (z) + iY n (z) and E(n2\z) = Jn(^) — iY n (^) are also independent solutions; these are the Hankel functions of the first and second kinds. The superscripts on the Hankel function denote the type of Hankel function, not its derivative. In later chapters, the symbol H n is used as an abbreviated form for Hn . For the purposes of formulae given here, n is an integer and z any complex number with Im(z) > 0; and it is to be noted that these are not necessary conditions, for example, n can be an arbitrary complex number. The function J n (z) is an analytic function everywhere in the complex z plane. The functions Yn(z), H n (z) and H n (z) are analytic functions everywhere in the complex z plane cut along the negative real axis. For analytical continuation in the complex
Acoustics of Underwater Structures
20
plane, values on the upper edge of the cut along the negative real axis are related to values on the positive real axis by the formulae J„(-ar)
=
(-l)nJ„(z),
Yn(-x)
=
( - l ) n Y n ( * ) + 2i(-l) n J„(;r),
!#>(-*)
=
(-ly^HWOr),
=
(-l)nE™(x)
4
2)
(-^)
+ 2(-l)nJn(x).
(1.6.3)
The Bessel functions satisfy the recurrence relations C„+i(z)
=
—Cn(z)-C„_i(z), Z
C'n(z)
=
nCn(z)
=
nCn(z)
=
i(C„-i(2r)-Cn+i(z)), zCn-xW-zCfa), zC'n(z) + zCn^(z),
with CQ(Z) — —C\{z), and C-n(z) both for numerical calculations and The small and large argument cal quantities in their near and far expansions are limJ„(z)
(1.6.4)
n
— (—l) C n (z). These formulae are useful simplifying algebraic expressions. expansions are required to evaluate physi fields, respectively. The first terms in the
=
zn/2nnl
=
(2/JT) (In z-
=
-2n(n
z-+0
limYo(z)
0.1159),
Z—»-0
lim Yn(z) z—vQ
- l)\/wzn,
\
lim J n (z)
=
lim Yn(z)
— \/2/7rzsm(z
/
n > 0,
i
\f2/-KZQ,os(z — nir/2 — 7r/4), — n,7r/2 — 7r/4),
2—»-00
limHW^)
=
^2/wzexp
(i(z - nw/2 -
lim HW(z)
=
y/2/7rzexp (-i(z -
UTT/2
TT/4))
-
,
TT/4))
.
(1.6.5)
The function J„(z) is finite at z = 0, at which point the functions Y n (z), H^ '(z) and Hn (2) are singular.
Mathematical Methods
21
Some of the Bessel function Wronskian relations are 3n(z)Y'n(z)-Yn(z)3'Jz)
=
2/TTZ,
Jn(z)EW'(z)-E(n1\z)3'n(z)
=
21/TTZ,
=
-2/TTZ2,
=
-2/irz,
Jn(z)YZ(z)-Yn(zmz) 3n(z)Yn+1(z)-Yn(z)3n+1(z) RVKz^lM-EWWEZliz)
= -4i/™.
(1.6.6)
These relations can sometimes help to simplify algebraic expressions that occur when solving acoustic problems. A special form of Graf's "addition" theorem is given in reference [1], as C
< « (
sinj
= ^
a
+
nMJ
n
(^)|
'
(1.6.7)
where z is any complex number, d = A/( Q 2 -f 62 — 2a6 cos 0), a — b cos 0 = d cos z/>, 6sin0 = dsin^>, |6exp(±i#)| < \a\. The final constraint is not required when C = J and z/ is any integer including zero. Variants of this addition theorem are required for developing particular forms of Green's functions. A number of relations involving integrals have found useful application when solving physical problems by transform methods. A commonly required integral is J^
{ sTnnt « * « « » ( * - * » d * = 2 " " J - W { s T n t
W
If a, 6 and k are positive, although with certain limitations they may be complex, then it is shown in reference [2] that exp{iJby/(q2 + 62)} _ f°° e x p { - q y V - k2)} V V + b2 )
~ Jo
^(s2 - P)
Jo(bs)sds.
(1.6.9)
This integral has a branch point at s — &, and the path of integration must be indented to avoid it. An e-prescription is used in which the real valued k is given a small imaginary part, viz. k = k(\ +ie). This lifts the the branch point above the real s axis, or equivalently indents the contour below the real axis. When s > k the positive value of y/(s2 — k2) is implied. A related integral is given in
Acoustics of Underwater Structures
22
reference [3] as expii^y^TP)} \/(a2 + b2)
i p ^ J-oo
=
H
^(avW^))exp(1S6)dS,
(1.6.10)
where 0 < arg y/{k2 — s2) < 7r, 0 < arg(fc) < 7r and a and 6 are real. A particular case of the Hankel integrals discussed in reference [2] is
Jo
Jn(sa)Jn(sb) s2 ~ 7 2
=
^ ^
f (m/2)Jn(ya)Eln\jb), for b > a, 1 (7ri/2)J n (76)Hi 1) ( 7 a), for a > 6,
with Im(7) > 0 and Re(7) > 0. This formula is valid for both positive and negative values of n. The integration is facilitated by extending the range of integration to the entire real axis by using the identity Jn(x) = i { I # > ( * ) - (-iru£X-x)},
(1.6.12)
which is obtained from the relation J n (ic) = (l/2){Hn (x) + Wn (x)} and the third of Eq. (1.6.3). First, for b > a, take x = bs and after some re-arrangement of terms the integral r + °° ,
z
J-oo
Jnisa^isb) * —y
results. The integration path is initially along the upper edge of the branch cut extending from s = — oo to 5 = 0, and then along the positive real axis extending from s — 0 to s — oo. The e-prescription, viz. 7 = 7(1 + e), lifts the pole at s = + 7 above the real axis, when Im(7) = 0; the pole at s = —7 does not contribute as it is moved below the real axis. This is equivalent to indenting the s integration path, on the positive real axis, below the real pole. An indentation at the origin is necessary because of the singularity of the Hankel function. When this function is replaced by the first term of its small argument expansion, viz. (2i/7r) ln(s6) for n = 0 and ((n — l)!/i7r)(2/s&)n for n > 0, the contribution from the indentation at the origin can be shown to vanish. The residue theorem then allows evaluation of the integral as the first of Eq. (1.6.11). The procedure is much the same when a > 6; take x — as etc., to end up with the second of Eq. (1.6.11).
Mathematical Methods
23
T h e Hankel transform stems from an extension of Neumann's integral by Hankel, as discussed in reference [2]. For field problems in cylindrical coordi nates, the Hankel transform pair, f(x)
-
/ Jo
F(a)
=
/ Jo
F(a)Jn(ax)ada,
/»oo
f(x)Jn(ax)xdx,
(1.6.14)
can sometimes be used to facilitate solving the reduced Helmholtz wave equa tion. In other versions of this transform, certain factors of 2ir are present. The transform stems from the more general transform pair, /»oo
g{x)
=
/ Jo
G(a)
=
/
G(a)^(ax)(xa)^2day
/•OO
g(x)Ju(ax)(xa)1/2dx.
(1.6.15)
Jo
1.7
Spherical Bessel Functions T h e spherical Bessel functions cn(z)
are solutions of the homogeneous dif
ferential equation
z 2
^
L
+ 2
^
+
{ z 2 _ n ( n +
1)}Cn =
0
'
(L7
-1}
which arises from independent separable solutions, V(R, 0, ) = A(k, n)cn(kR)Sn(cos of the reduced wave equation, V 2 \£ + k2^
0),
(1.7.2)
= 0, in spherical coordinates. The
two independent solutions of Eq. (1.7.1) are the spherical Bessel function of the first kind }n{z)
and the spherical Bessel function of the second kind y n ( z ) . For
the purposes herein, n is an integer and z any complex number with lm(z)
> 0;
but it must be noted t h a t these are not, in general, necessary conditions. Spher ical Bessel functions of the third kind, defined as h^ \z) z
hn (z) — jn(^) — iy n ( )>
are a
^
so
— }n(z) + lYn{z)
anc
*
independent solutions; these are the spherical
Acoustics of Underwater Structures
24
Hankel functions of the first a n d second kinds.
In later chapters, t h e sym
bol h n is used as an abbreviated form for hn . The spherical Bessel func tions are related t o cylindrical Bessel functions in a straightforward way, viz. cn(z)
= >/(7r/2z)C f n + i/2(^). For analytical continuation in the complex plane,
values on the upper edge of the cut along the negative real axis are related to values on the positive real axis by the formulae jn(-x)
=
(-l)nj„(*),
yn{-x)
=
(-l)"+1y„(*),
b£\-x)
= (-l) n h«(*),
tfH-x)
= (-l)"^ 1 ^)-
(1-7-3)
T h e functions have particularly simple forms for small values of integer n, viz. . sin z Jo(z) = , z , x cos z z , yo(*) =
b£\z) = - i ^ ^ l ,
sin z cos z Ji(z) = —-2 , z1 z cos z sin z z yi(*) = - - z*
h[%) = -i(-i + l / z ) ^ M .
(L7 . 4)
T h e spherical Bessel functions satisfy the recurrence relations cn+i(z) c
=
2n+ 1 cn(2:)-cn_i(z), z
=
-Cn(z)-Cn
=
n c n _ 1 ( 2 ) - ( n + l)cn+1(2),
=
cn-1(z)-^——cn(z),
71
'n(z)
(2n + l)c'n(z) c'n(z)
+
i(z),
(1.7.5)
with c'0(z) = -Cl(z); h ( _ ^ _ i W = i(-l)nh£\z) and h(_2;>_i(s) = -i(-l)"h\z) n+1 for values n = 0 , 1 , 2 , . . . ; y„(z) = ( - l ) j _ „ _ 1 ( 2 ) , for values n = 0, ± 1 , ± 2 , . . . . T h e first terms of the small and large argument expansions are limj„(z)
=
2n/1.3...(2n+l),
limy„(z)
=
-1.1.3... (2n-l)/zn+1,
Mathematical Methods
25
lim j n (z)
=
z—»-oo
- sin(2r -
HTT/2),
2
lim y n (z)
=
— cos(z - nw/2),
z—+oo
z
limh£>(*) = lim hi2\z)
exp (i(z — n7r/2 — TT/2)) , - exp (—i(z — mr/2 — 7r/2)).
(1.7.6)
The function j n (z) is finite at z — 0, while y n (z), h ^ ( z ) and h ^ ( z ) are singular there. Some of the spherical Bessel function Wronskian relations are jn(z)y>n(z)-yn(Z)j'n(z) jn(z)hP>(z)-hP(z)j'n(z) hW{z)h^'(z)-hW'(z)h^(z)
=
l/z\
= iA 2 , = -2i/z2.
(1.7.7)
A special form of Gegenbauer's "addition" theorem is given in reference [1] as ( sin zd
-zLzd = £ ( 2 n + 1 )J"(* 6 ) p »( cos ) J n =0
Uza)l
Yn(za),
(1.7.8)
where z is any complex number, d = \ / ( a 2 + b2 — 2ab cos 9) and |6exp(±i#)| < \a\. The function P n (cos#) is a Legendre polynomial. Corresponding to Eq. (1.6.11) is the integral relation
F
'
in(sa)in(sb) 2
S -k
2
'
2
ds
(7rik/2)in(ka)h(n\kb) (7rik/2)in(kb)h{n\ka)
for 6 > a, for a > 6,
(1.7.9)
Jo
which is also proved in much the same way. Corresponding to the Hankel trans form pair, in Eq. (1.6.14), is the spherical Bessel function Hankel transform pair, /•OO
f(x)
=
F(a)jn(ax)a2da,
y/(2/n) Jo /•OO
F(a)
=
y/^M
f(x)jn(ax)x2dx.
(1.7.10) Jo In other versions of this transform, different arrangements of the functions and constants are likely to occur.
Acoustics of Underwater Structures
26
1.8
Legendre Functions
The associated legendre functions S™(x) are solutions of the homogeneous differential equation #cm
flqm
+
/
m2
+
\
"-»*£--"~t ("<" "" T^J «" = "■ (L81) which arises from separable solutions, *(iJ, 0, <£) = A(Ar, n, m)c n (fc#) exp(im^)5^(cos (9),
(1.8.2)
of the reduced wave equation, V 2 ^ + k2^ = 0, in spherical coordinates. The two independent solutions of Eq. (1.8.1) are the associated Legendre function of the first kind P™(#) and the associated Legendre function of the second kind Q™(x). For the purposes herein, n is an integer and x = cos# with 0 < 6 < 7r, but it must be noted that these are not, in general, necessary conditions. A useful source for basic information on Legendre functions is reference [1]. The functions P™(#) and Q™(#) for degree n and order m can be defined as
p?(«)
= ( - l r o - i Tdx"" ^
(COO
= (-iHi-*T/2^#-
(1-8-3)
It is to be noted that P™(x) vanishes for m > n. For ra = 0, the functions re duce to the more frequently required Legendre polynomials Pn(x) and Legendre functions of the second kind Q n (z)- These functions have particularly simple forms for the first few values of n, thus, Po(*) = l , Pi(*) = «,
P2(ar)=|(3ar2-1),
Qi(x)=——\n——-
—
(1.8.4)
The function P n ( z ) is finite everywhere, but Qn{x) is singular at x — ± 1 and will not be used here as a solution of the wave equation in spherical coordinates.
Mathematical Methods
27
The Legendre functions F„(x) and Qn(x) satisfy the recurrence relations (n + l)P„+x(*) 2
(x -l)P'n(x)
=
(2n+l)j;Pn(x)-nPn_1(x),
=
nxPn(x)-nPn.1(x),
*K(*) P' n + 1 (x)
= =
P n - i W + "Pn(x), xP'n(x) + (n + l)Pn(x),
P'n+iOO
=
P'n.1(x) + (2n+l)Pn(x),
(1.8.5)
with P_!(a:) = P 0 (x), P_„_i(x) = P n , P „ ( - x ) = (-l)"Pn(x), P„(l) = 1, and P n ( - 1 ) = (-1)». Due to the orthogonality property of the functions P™(cos#), it is possible to represent an arbitrary function f{6) as a series of these functions. Thus if oo
/(0) = £ a n P ™ ( c o s 0 ) ,
(1.8.6)
n=0
then " + 1 | W ~ m i j / * / ( « * (cos*) sin 2 (n + my. J0 For the special case of m = 0, the transform pair an =
2
fcW.
(1.8.7)
oo
f(9)
=
^anPn(cos0), n=0
2n + l 2
/ /(0)P„(cos0)sin0d0, Jo
(1.8.8)
is obtained. For example, if /(0) = Fo6(6)/27ra2 sin 0, representing a point force of amplitude Fo located at 0 — 0 and R= a, then a n = (2n -f l)Fo/47ra 2 . The spherical Bessel function of the first kind and the Legendre polynomial are related through the integral relation
i
r
]n(z) = - ( - i ) n / exp(i2cos0)P n (cos0)sin0d0, (1.8.9) 2 Jo which is required when expressing an incoming plane wave in spherical coordi nates.
Acoustics of Underwater Structures
28
1.9
Stationary Phase T h e leading term in the asymptotic evaluation of a certain class of integrals
is of fundamental importance for physical problems; for example, in acoustics problems it provides an explicit representation of the far field pressure, when the near field pressure is given as an integral transform. Here, an heuristic approach to finding this leading term by the method of stationary phase is given. In one dimension, the integral to be evaluated is of the form +oo
/
/(a)exp(iAff(a))da,
(1.9.1)
-oo
where /(or) and g(a) are analytical everywhere, say, and A is a large real positive parameter. T h e real and imaginary parts of the function exp(iA#(a)), for real p(c*), fluctuate rapidly as a varies, due to the rapidly changing phase
Xg(a).
This means t h a t if A is sufficiently large, successive portions of the integrand should cancel one another, except in the region of the point ao of stationary phase, i.e., the point at which the variation in the phase function \g(a)
is a
m i n i m u m . This point a — ao is found from the relation g'(<*) = 0-
(1.9.2)
In the neighbourhood of this point, the Taylor's expansion
g(a) ~ (a0) +
(Q
~ 2 Qo) V ( a 0 )
(1.9.3)
is used to rewrite Eq. (1.9.1) as y+oo i /(A) a /(a 0 )exp(iA(ao)) / exp{-A(/"(a0)(a - a0)2}da,
(1.9.4)
for A —* oo. Recall t h a t this arrangement is possible because it has been assumed t h a t the dominant contribution to the integral arises from a small region near to a — a o , where the function g(a) can reasonably be assumed constant. T h e s t a n d a r d integral, see, for example, reference [4], +oo
/
-oo
exp(W)da = V ? « P 0 " ^ ) / 4 ) |
( 1 9 5)
Mathematical Methods
29
is obtained, from a transform pair in Table 1.1, by adding — ea2 to the ex ponent ii/a 2 , and then subsequently letting e tend to zero. Thus, by taking v — \g"(ao)/2)
and changing the integration variable to a - a o , the stationary
phase integral of Eq. (1.9.4) is obtained as „ y/(?*)f(<*o)
I(x)
exp{iAy(a 0 ) + (iir/4)sga(g"(ao))}
(
In two dimensions, the integral to be evaluated is of the form +OO y + oo
/
/
/(a,/?)exp(iA0(a,/9))dad/?.
(1.9.7)
-oo J — oo
T h e stationary phase point (a,/?) = ( a 0 , A)) is found from the two relations
^
=
da
M ^
= 0.
(1.9.8)
op
In the neighbourhood of this point, the Taylor's expansion g(a, /?) ~ g0 + ^ " ^ ' g i i + ^ ' " ^ 9 2 2 + (a - «„)(/? - A>)
(1-9.9)
with (
d2go
a\
d2go
9o = g{<xo,Po),
9n = ^ - y , dc*o is used to rewrite Eq. (1.9.7) as 1(A)
«
922= -^2,
d2go
MQim
9i2 = « *a > oaodpo
(1.9.10)
/(ofo,^o)exp(iA(/(a 0 > i9o)) x + OO P + OO
\
/-\
/
y e x p ( y ( < h i c * 2 + <722/?2 + 2<7 12 a/?)J dad/3, (1.9.11) after first transforming the integration variables to a — <*o and ft —fa> T h e above two-dimensional integral is not easy to evaluate because of the t e r m #12. Fortunately, Cooke [4] has suggested a procedure which is straightfor ward to apply. For the particular case of #22 / 0, write gna2
+ 22/?2 + 2g12ap
= g22 U + — ) V 922 J
+ (gn \
- ^ ) «2, 922/
(1-9-12)
Acoustics of Underwater Structures
30
and transform to the axes set x, y where x — a and y = /3 + agn/f922- Then, because the determinant of the Jacobian, defined in Section 1.11, is unity, /(A)
f(a0,Po)exp(i\g(a0,P0)) r +oo
/-+CO
/iA
/:7>(f(
x
^ 1 1 ^ 2 2 - ^ 1 2 ^ 2 , „ „,2 Z + 0222/ 922
dxdy. (1.9.13)
Repeated application of the standard integral of Eq. (1.9.5) gives 7(A)
«
27r/(a 0 ,/?o)exp(iA^(a 0 ,^o)) x exp{J7rsgn(ff22)[l + sgn(gfn^22 - ^i 2 )1/ 4 }
(1.9.14) W\9n922-gh\ after some minor rearrangement by using the identity sgn(a/6) = sgn(a)sgn(6). If there is more than a single stationary phase point inside the range of in tegration, then it is necessary to sum the asymptotic terms associated with each stationary phase point. Other critical points that contribute to the asymptotic expansions of two-dimensional integrals have been considered by Cooke [4]. If there are poles on the real axis, they must be explicitly included. For compre hensive accounts of the stationary phase method see the textbooks of Jones [5] and Bleiston & Handelsman [6]. 1.10
Matrices
Matrices are rectangular arrays of elements. For example, a matrix with m rows and n columns is written as / an [A]
a>2\
=
ai2
...
^22
ain
\
«2n
(1.10.1)
i x n
/ The general element is denoted as a,j where i is the row number and j the column number. If a matrix consists of a single column of length n rows, it is written as \
«ml
{B} n x1
«m2
I h \bn
(1.10.2) )
Mathematical Methods
31
and if it consists of a single row of length m columns, it can be written as {C}T = ( 1x m
c2,
Clj
...
cm ) ,
(1.10.3)
where the symbol, T, signifies the operation of transposition, viz. an interchange of rows and columns, and {C} is a column matrix. The suffices m and n denote the number of rows and columns after any operation, such as the transpose T, has been carried out. The subscripts can be omitted when the number of rows and columns is obvious. A matrix [A] is symmetric if [A] — [A]T, i.e a^- = aji and there is a require ment that the matrix is square, viz. m — n. A matrix [A] is skew symmetric if [A] = [—A]T, the negative sign denoting a sign change of all elements. If a square matrix [A] has zero elements everywhere except on the diagonal where they are An, then the matrix is called a diagonal matrix. If a square matrix [A] has zero elements everywhere except on the diagonal where they are An — 1, then the matrix is called a unit or identity matrix and it is denoted by the expression [I]. If a matrix has zero elements everywhere it is called a null matrix. The sum of the diagonal elements of a square matrix is called the trace of the matrix. If [A] and [B] are mxn matrices then the operation [C] — [A] + [B] is simply a m x n matrix [C] with elements Cij = aij -f- bij. The subtraction of two matrices is similarly trivial. Multiplication of two matrices is defined symbolically as [A] mxn
=
[B] [C], m xp px n
(1.10.4)
with elements p
a>ij - Y2bikCkJ'
(1.10.5)
Generally, [5][C] / [C][5]. If [A] and [B] are square matrices then the operation [A][B] = [I] has solution [B] = [A]'1, where [A]~l is called the inverse matrix. Note that [A _ 1 ] T = [ A T ] - 1 where the operations are done in the order indicated. If [A][A]T = [/], then [A] is an orthogonal matrix satisfying [A]T = [A]" 1 and [A]T[A] = [I]. If [A] and [B] and [C] are square matrices and [A] = [B][C], then [A]T = [C]T[B]T and [A]" 1 = [ C ] " 1 ^ ] " 1 - If A is a constant then X[A] is interpreted as the matrix whose elements are Aa^.
Acoustics of Underwater Structures
32
T h e determinant of a square m a t r i x is denoted as \A\, and | A T | = |A|, and | A - 1 | = l/\A\.
Determinants of 2 x 2 and 3 x 3 matrices are
\A2\
=
011022 — 012021,
1^4.31
=
011(022033 - 023032) - 012(021033 - 023031) + 013(021032 - 022031)-
(1.10.6) For the general nxn matrix, the determinant is obtained by repeated application of t h e formula + a13M13 - . . . + ( - l ) n + 1 o l n M l n ,
\A\ = o n M n - a12Ml2
(1.10.7)
where Mij is t h e determinant of the m a t r i x [A] with row i and column j removed. If [A] and [B] are square matrices then \AB\ = |-A||B|. T h e forced time-harmonic response of dynamical systems, as described in later chapters, can be reduced t o t h e solution of simultaneous equations of the form [A] nxn
{X} nxl
=
{F}, n x l
(1.10.8)
where {X} is a m a t r i x of responses, {F} is m a t r i x of excitations and [A] is called a dynamic stiffness m a t r i x . Generally, [A] is a complex matrix which has a band structure, i.e. t h e elements are zero outside of a band of width 6, say, centred on t h e m a i n diagonal. T h e solution of Eq. (1.10.8) is {X} nxl
=
[A]'1 nxn
{F}, n x l
(1.10.9)
which requires n 3 operations if the bandwidth properties are not used or nb2 operations if the bandwidth properties are used. Thus, as well as a factor of n/b saving in computer array space, there can be a time saving factor proportional to n2/b2.
For a m e d i u m size finite element problem with n — 1000 and b — 100,
say, t h e computational times can be dramatically reduced when a "band solver" is used instead of a "full m a t r i x solver". It is sometimes desirable t o partition Eq. (1.10.8) into matrices of order p and q where p -f- q = n. Thus, /
\
[B] px p [D] qxp
[C] p x q [E] qxq
\ ( { y ) \ ( II p x l | _ [ {Z} ~ J \ qxl / \
{G} p x l {H} qxl
\ [1.10.10) /
Mathematical Methods
33
The following pair of matrix equations results, after multiplying out this parti tioned matrix equation, [B] pxp
{Y} + [C] {Z} px 1 pxq qx I
=
{G}, px 1
[D] q xp
{Y} + [E] {Z} px I qxq qxI
=
{H}. qx 1
(1.10.11)
The free response of dynamical systems analyzed by the finite element method reduces to the solution of the homogeneous matrix equation [S] {X} -u? [M] {X} = 0, n xn nx 1 nx n nx 1
(1.10.12)
where {X} is a matrix of responses, [S] is a stiffness matrix and [M] is a mass matrix. Generally, in the absence of dissipation and rotation effects, both [S\ and [M] are band matrices which are real and symmetric. The matrix [S] is usually positive definite in the sense that it arises from a quadratic form such as strain energy, while the matrix [M] is positive semidefinite because it arises from kinetic energy. Eq. (1.10.12) is a standard eigenvalue/eigenvector problem with a solution of TV eigenvalues, u>^, and corresponding eigenvectors, {X^}, which can be normalized such that {X^}T[M]{X^}
= 1, and thus {X^}T[S]{X^}
= a£.
(1.10.13)
From the normalized eigenvalues and eigenvectors, the time-harmonic response arising from a forcing function {F} exp(—kjtf), see Section 2.1, can be constructed as
A
{X} = J2
2
iX^MX^^iF}
2 ■ 2 »
(L10-14)
where the r]n are modal hysteretic loss factors introduced to simulate damping. The response at i due to a single unit excitation at j is X
H =E
2 \
j
-
f.
(1.10.15)
in which the suffices i and j denote the position in the eigenvector. Thus, Xij depends only on the ith and j t h eigenvector elements.
Acoustics of Underwater Structures
34
If [A] is a complex square matrix then it is called Hermitian if [A]T = [A]* where the operation * denotes the complex conjugate of the matrix elements. The matrix [A] is called skew Hermitian if [A]T = [—A]*. Hermitian matrices possess a number of useful properties. If {/} and {g} are column vectors and [A] and [B] are Hermitian matrices then
m
= [Af,
T
=
{nT[A]{f}
=
{f} [A]{g}
{g}T[A*]{f}, {f}T[A*]{f}-
(1-10.16)
The first formula shows that any real symmetric matrix is Hermitian. The second is proved by applying the rule for the transpose of a matrix product. In the third formula both terms are real, being positive when [A] is also positive definite. The eigenvalues A; of [A], obtained from the equation [A]{x} = X{x},
(1.10.17)
are real. The same eigenvalues are obtained from the matrix [A*]. The eigenvec tors {xi} and {XJ } of the matrices [A] and [A*] are orthogonal, viz. {a?»}T{a?J} = 0 when i ^ j . The matrix product [A][J5] is not Hermitian, unless [A] and [B] commute, but the product [-A][A] is Hermitian. The matrices [A][B] -f- [2?][J4] and i([A][5] - [B][A]) are Hermitian. 1.11
Numerical Integration
A bewildering variety of quadrature formulae are available for evaluating integrals numerically, see, for example, reference [1]. The workhorses are the integration rules of Simpson and Gauss, which are generally all that are nec essary for evaluating integrals with complicated but nonetheless well-behaved integrands. If h = (b — a)/2 is the interval between three successive function evaluations, / ( a ) , f(a + /i), and /(&), then Simpson's rule is J
f(x)dx
= I (f(a) + 4/(o + h) + f(b)),
(1.11.1)
which is exact provided f(x) is of a cubic or of lesser degree in the range of integration. If h = (6 — a)/3 is the interval between four successive function
Mathematical Methods
35
evaluations, / ( a ) , / ( a -f ft), f(a -j- 2ft) and /(&), then Simpson's 3/8 rule is / f(x)dx
= y (/(a) + 3/(a + ft) + 3/(a + 2ft) + f(b)),
(1.11.2)
which is also exact provided f(x) is of a cubic or of lesser degree in the range of integration. Simpson's rule is ideal for evaluating an integral when the integrand is given by a table of TV equally spaced numerical values: if TV is odd, then use Simpson's rule piecewise throughout the range of integration; if TV is even use Simpson's rule piecewise except at the end when a single application of the 3/8 rule is appropriate. A drawback associated with Simpson's rule is the need to evaluate the function f(x) at the endpoints, where for many problems the integrand has an integrable singularity. The Gauss quadrature formulae are the most popular of the quadrature formulae, partly due to their efficiency and partly because there is no need to evaluate the integrand at the end points where an integrable singularity might be located. The formulae, for single, double and triple integrals, are
b
/ g(x)dx f" [' ( \A A / / g(x,y)dxdy Jc
_
N
=
Y^wi9(ai)>
= —
(b-a)(d-c)"" ir2^2^WiWjg{aiyPj), z .=lj.=1
Ja
g(x,y,z)dxdydz
„\
z = —^
— /2 ^ /1 ^ Z/ ^ W i W J W k ^ a i ^ 3 ^ k ^ «=ij=ijfc=i
(1.11.3) where
The weights Wi and abscissae X{ for various values of TV are widely available; see reference [1] for values up to TV = 80, and Table 1.3 for values for TV = 2 and TV = 4. The Gaussian quadrature formulae are exact when the the function g is a polynomial of degree 2TV — 1 or lower; hence, they are more efficient than Simpson's rule for a given number of function evaluations. If the integrand varies appreciably, the integration range can be split into a number of subranges
36
Acoustics of Underwater Structures
Table 1.3: Weights W{ and abscissae X{ for low order Gauss quadrature.
1 Wi, N = 2
1.0 1.0
xitN
1 Wi, N = 4
= 2
-0.57735027 +0.57735027
0.34785485 0.65214515 0.65214515 0.34785485
Xi,N
= 4 1
-0.86113631 -0.33998104 +0.33998104 +0.86113631
and a low order quadrature formula applied to each subrange.
An adaptive
strategy, whereby subranges are repeatedly halved until convergence is achieved to a specified relative or absolute accuracy, is generally effective. T h e integration regions of the aforementioned Gaussian quadratures are over a line on the x axis, a rectangle in the xy plane and a rectangular box in xyz space. For numerical applications, such as the finite element method, a region of interest generally comprises an assemblage of simple elements such as arbitrary lines, quadrilaterals and hexahedrons arbitrarily placed in space. These elements are m a p p e d on to an axis line, square and cube, respectively. Numerical integration is then uncomplicated. Here, generating lines are assumed straight and generating surfaces plane, see the schematic in Figure 1.2. For integration over elements with curved boundaries, finite element textbooks such as t h a t of Rao [7] should be consulted. First, integration along a line in the xy plane is considered.
Let ( z i , t / i )
and (#2,2/2) k e the coordinates of the endpoints of the line, with distance along the line from the point ( # i , y i ) being denoted by s. Let these coordinates be m a p p e d on to the points - 1 and 4 1 of the f axis. Omitting details, the linear m a p p i n g relations are a? = x(f)
=
N1x1 +
y = y(0
=
Niyi
N2x2y
+ N2y2,
(1.11.5)
where Ni = \ ( l - 0 . ^ 2 = ^ ( 1 + 0 -
(111.6)
These formulae can be demonstrated as correct by inspection: at the endpoint on the left, set f = - 1 , giving (x,y)
= ( # i , y i ) , etc. The length element ds on
the line in the xy plane can be related to the length element d£ on the £ axis as
Mathematical Methods
37
Figure 1.2: Mapping of line in xy plane on to £ axis, quadrilateral in xy plane on to square in £77 plane, and hexahedron in xyz space on to cube in £77^ space. T h e origin of the (#, y, z) axes set is arbitrary, the origin of the (£, 77, () axes set is at the centroid of the elements. follows, d s 2 = d* 2 + dy 2 = \{{x2 where L = \ / { ( # 2
—
- z{f
+ (y2 -
yi)
2
}d£2 = i l 2 d £ 2 ,
(1.11.7)
# i ) 2 + (2/2 _ 2/i) 2 } is the length of the line. Thus,
j g(x,y)ds = ^J_
ff{*(0>y(OR
(i-H-8)
comprises a change of variable when evaluating an integral over a line.
The
integral on the right hand side of Eq. (1.11.8) can be evaluated numerically by using the first of the quadrature formula in Eq. (1.11.3) with a = — 1 and b = + 1 . Secondly, integration over an arbitrary quadrilateral in the xy plane is con sidered.
Let (#1,2/1), (#2,2/2), (#3,2/3) and (#4,2/4) be the coordinates of the
vertices in the xy plane; they are numbered counterclockwise, say, from lower left. Let these vertex coordinates be m a p p e d on to the points ( — 1 , - 1 ) , ( + 1 , - 1 ) , (1,1) and (—1, -4-1) in the £77 plane. Omitting details, the linear mapping rela-
Acoustics of Underwater Structures
38
tions are x = x(^r])
=
V = y(Z, V) =
Nixi + N2x2 + N3X3 + NAx4, Niyi + N2y2 + N3y3 + N4y4)
(1.11.9)
where
tfi = J(l-0(l-'7),
^2=^(1+oa-»?).
^ 3 = ^(1 + 0 ( 1 + 1),
N4 = \{I-Z){I
(1.11.10)
+ T,).
These can be demonstrated as correct by inspection: at the lower left vertex, set (£,77) = ( - 1 , - 1 ) , giving (x,y) = (a?i,2/i), etc. The relation j J g(x,y)dxdy
=J ^ j
g{x(^ rjly(^rj)}\J(^
f|)|d^dt|
(1.11.11)
is standard to a change of variable in an integral, where J
U'1>-
\ dx/dV
dy/dr, J '
U-ll.l^
with dx/di
=
-{-(l-f])x1+(l-rl)x2
+
(l+r])x3-(l+i1)xA},
dx/dr,
=
^{-(l-O*!-(1+0*2+(1+0*3 +(1-OM,
dy/di
=
-{-(1-77)2/1 + (1-1)1/2 + ( l + i ) y 3 - (1+77)^4),
dy/dr, = I{-(i-o y i -(i+0ya +(1+0%+ (i-0y4}. (i.n.13) The matrix J(£, 77) is called the Jacobian. The integral on the right hand side of Eq. (1.11.11) can be evaluated numerically by using the second of the quadrature formulae in Eq. (1.11.3) with a = c = — 1 and b = d = + 1 . For the degenerate case of two coincident vertices, (2:4,2/4) = (#3,3/3), say, the integration is over a triangle; this is an important geometry for the finite element method. The Jacobian has a number of useful properties amongst which is the calculation of derivatives. Thus, if f(£,rj) is a function of the coordinates (£,77), then (df/dx,df/dyf
= [J(£,ri)\-l{dfldZ,dfldrj)T
(1.11.14)
Mathematical Methods
39
comprises a formula for obtaining derivatives. Finally, integration over a general hexahedron is considered. Let (#;,£/;, 2;), i = 1,8, be the coordinates of the vertices of the hexahedron in the xyz space. Let these coordinates be m a p p e d on to the cube vertices (&,/?*,C)
m
^ne ^ C
space, as ( s i , y i , * i ) - " (£i,*7i,G)
=
(-1,-1,+1),
(*2, 2/2, Z2) -> ( 6 , *?2, C2)
=
( + 1, - 1 , + 1 ) ,
(*3, 2/3, 2:3) ~+ ( 6 , 7/3, Cs)
=
( + 1, + 1 , + 1 ) ,
(#4,2/4,24) - * (^4,^4,C4)
=
(-1,+1,+1),
(#5,2/5,2 5 ) - ^ ( 6 , ^ 5 , C 5 )
=
(-1,-1,-1),
(#6, 2/6,*6) -+(&>, r/ 6 ,<6)
=
(+1,-1,-1),
(#7,2/7,27) - ( f r ^ C r )
=
(+1,+1,-1),
(^8,2/8,28)-(^8,r78,C8)
=
(-1,+1,-1).
(1.11.15)
Thus, the numbering sequence used for the quadrilateral is also used here, except t h a t the hexahedron is generated from two displaced quadrilaterals. T h e linear m a p p i n g relations are 8
8
N
X
8
Ni
z
= J2 i*ii y = J2 y^ i=l
izz\
= Y,
NiZi
>
(1.11.16)
i=l
where
Ni(t,ri,0= g(l+ftO(l + ^ ) ( l + 0 0 -
(1.11.17)
Again, these can be demonstrated as correct by inspection: for the vertex num bered 1, set (£, r)X) — (—1, —1,+1), to give the point (x,yyz)
— (#1,2/1, z\), etc.
T h e relation
III
g(x,y,z)dxdydz v +1 r + i r + i
=
I I L ^^^'^'^'^^^(^^OJI^^OId^dc (1.11.18) is again s t a n d a r d to a change of variable in an integral, where
J(Z,ri,c)=\
/ dx/di dx/dn V dx/dc
dy/dt dy/dn dy/dc
dz/di \ dz/d^ . dz/dc J
(1.11.19)
Acoustics of Underwater Structures
40
T h e nine derivatives are obtained as 1
8
SA/S£ = gX)Af-6(l + »y^)(l+CiC), i= l
1
8
i= l i
8
0A/5C = gXiAiCHl + ^ K l + O T ) ,
(1.11.20)
*=1
in which t h e values of A and At are replaced in turn by x and #,-, y and y2- and z a n d Zi. T h e integral on t h e right hand side of Eq. (1.11.18) can be evaluated numerically by using t h e third of the quadrature formulae in Eq. (1.11.3) with a = c = e = — 1 a n d b = d — f = + 1 . If f(£,r)X)
1S
a function of the coordinates
(^,77,C), then
(df/dx,df/dy,df/dzf
= [J&vXTHdf/d^df/drj^df/dCf
(1.11.21)
comprises a formula for obtaining derivatives. T h e Fourier transforms of Section 1.1 can be evaluated numerically by Gaus sian q u a d r a t u r e , b u t if computer time is of the essence then the fast Fourier transform m e t h o d described in Section 2.2 should be considered. When there is a singularity in t h e integrand it is generally appropriate t o treat this singular ity explicitly. O n e m e t h o d uses a special quadrature formula, see, for example, reference [1]. Another m e t h o d removes the singularity analytically, for example, the rearrangement
/ = / ' /(*> d, = 9(l) f t dX + f i^hMdx, (1.11.22) 2 yy, Ja ^(&2 - Z ) Ja j{p-Z*yJa y/(b* - X*) ' { ' has a singular integral which can be evaluated analytically and a non-singular integral which can be evaluated numerically.
References and Additional Reading
1. M. Abramowitz and LA. Stegun, Handbook of Mathematical (Dover Publications, New York, 1965).
Functions,
Mathematical Methods
41
2. G.N. Watson, A Treatise on the Theory of Bessel Functions, (The Uni versity Press, Cambridge, 1966). 3. I.S. Gradshteyn and I.M. Ryzhik, Table of Integrals, Series, and Prod ucts, ( corrected and enlarged edition, Academic Press, London, 1980). 4. J.C. Cooke, Stationary phase in two dimensions, IMA Journal of Applied Mathematics, 29 (1981), pages 25-37. 5. D.S. Jones, The Theory of Generalised Functions, (second edition, Cam bridge University Press, Cambridge, 1982). 6. N. Bleiston and R.A. Handelsman, Asymptotic Expansions of Integrals, (Dover Publications, New York, 1986). 7. S.S. Rao, The Finite Element Method in Engineering, (second edition, Pergamon Press, Oxford, 1989). 8. R.N. Bracewell, The Fourier Transform and its Applications, (second edition, McGraw-Hill, Tokyo, 1983). 9. R.F. Hoskins, Generalised Functions, (Ellis Horwood, Chichester, 1979). 10. M.J. Lighthill, An Introduction to Fourier Analysis and Generalised Functions, (The University Press, Cambridge, 1959). 11. M.R. Spiegel, Fourier Analysis with Applications to Boundary Value Problems, (Schaum's Outline Series, McGraw-Hill, USA, 1974). 12. M.R. Spiegel, Mathematical Handbook of Formulas and Tables, (Schaum's Outline Series, McGraw-Hill, USA, 1968). 13. M.R. Spiegel, Advanced Calculus, (SI (metric) edition, Schaum's Outline Series, McGraw-Hill, Singapore, 1974). 14. N. Kemmer, Vector Analysis, (Cambridge University Press, Cambridge, 1977). 15. H.A. Priestley, Introduction to Complex Analysis, (Clarendon Press, Ox ford, 1985). 16. I. Stewart and D. Tall, Complex Analysis, (Cambridge University Press, Cambridge, 1983). 17. W.H. Press et al., Numerical Recipes, (Cambridge University Press, New York, 1986).
C H A P T E R 2. R E S P O N S E OF D Y N A M I C A L
2.1
SYSTEMS
Time-Harmonic Response T h e equation of motion of a dynamical system comprising a simple oscillator
in linear motion can be written according to Newton's second law of motion as M
^ )
+
C
^
+
S
u
i
t
)
= m
( 2 1 1 )
where u(t) is the vertical displacement of the mass M , C is the viscous d a m p ing coefficient which causes a retarding force proportional to velocity, S is the stiffness of the supporting spring which causes a retarding force proportional to displacement, and f(t)
is the external excitation force. T h e geometry is shown
in Figure 2.1. Another form of damping stems from material hysteresis loss; this is simulated by allowing the stiffness to be a complex value, viz. S = 5 ( 1 — i^) where rj is called the hysteretic loss factor. Energy loss in complex elastic struc tures is poorly understood so this form of "engineering" damping is a pragmatic way of representing it. A minor drawback is t h a t it results in a small non-causal response, as established by Milne [1]. Values of rj for practical structures gener ally depend on frequency; they range from 0.001 for lightly damped structures, through 0.01 for moderately damped structures to values in excess of 0.1 for special damping t r e a t m e n t s . If the oscillator is surrounded by a fluid, the values of M , S and C m a y include contributions arising from the fluid's presence. T h e time-harmonic solution of Eq. (2.1.1) is obtained by setting the excita tion force to f(t)
= F0exp(-iu;t),
(2.1.2)
where u is the radian frequency, which is related to the frequency / , in hertz, by UJ — 27r/. Thus, assuming a solution proportional to exp(—iwi), it is not difficult
43
Acoustics of Underwater Structures
44
Figure 2.1: A simple mass and spring oscillator excited by a force.
to show t h a t t(t) =
FQ -^M
exp(-iLot)
- i.C
+ 5(1 - itf =
when the relations du(t)/dt
FoH{w)
eXp(
-1W<) =
= — iu)it(i) and d2u(t)/dt2
{X
+ lY) eXp(
-1Wt)' (2.1.3)
— —uj2u{t) are used.
T h e velocity response is ii(t) = —iu;u(£), and the acceleration response is then u(t) =
-u)2u(t).
T h e measurable quantities are the real parts of f(t)
and u(t). Thus, the
actual applied force is FQ COS(U;/) where Fo is the peak amplitude of this periodic excitation. T h e actual displacement response is \FQH(LJ)\ quantity, \FoH(u))\ = \/(X2
cos(u>t — ty), where the
+ Y 2 ) , is the amplitude of the periodic motion, and
\£ = t a n _ 1 ( y / X ) is the phase lag relative to the applied force. T h e phase is usually taken to be the principal value, viz. — 7r < ^ < IT. For brevity, in timeharmonic problems, it is frequently stated t h a t the time variation exp(—icut) is omitted throughout, and the solution of Eq. (2.1.1), for the displacement, is U(LJ) = FQH(LJ)
for excitation force Fo.
T h e function H(LJ) is called the
displacement transfer function of the oscillator. T h e velocity transfer function is simply —IUJH(UJ) and the acceleration transfer function is
—UJ2H{UJ).
T h e denominator of Eq. (2.1.3) is called the dynamic stiffness of the oscil-
Response of Dynamical Systems
45
Figure 2.2: Acceleration transfer function of simple oscillator, in decibels refer ence 1 //m s~ 2 .
lator, viz. D{UJ) = S - u;2M - i(wC + Sri), and the equation D(u)u T h e real part of D(u)
(2.1.4)
= F0 is called the reduced equation of the oscillator.
is positive or negative depending on whether it acts like
a stiffness or a mass. T h e imaginary part of D(u>) is negative for energy loss. T h e time variation of the excitation force can also be taken as f(t)
=
F0 exp(+kjtf). If H+(w) is the complex transfer function for this time convention, then H+(u)
= H*(w),
where the asterisk denotes complex conjugate. This is
an i m p o r t a n t point to remember because while the convention exp(-iujt)
is usu
ally s t a n d a r d to acoustic problems, the time convention exp(+iu>t) is commonly used in the dynamical theory of structures. For time variation exp(+iu>t) it is necessary to define the hysteretic loss factor as S = S(l + if}). In this textbook the time convention exp(—iu;t) is used throughout. For a numerical example, a mass, M = 1000.0, mounted on a grounded spring which has stiffness S = 1.0 x 10 8 and a large loss factor r] = 0.1 is considered. T h e viscous damping constant C is assumed negligible. In Figure 2.2 is shown the amplitude of the acceleration response when the excitation is a unit
Acoustics of Underwater Structures
46
time-harmonic force. T h e response is in decibels reference 1 fim s~ 2 , defined as 20 x log 10 (|ix|) + 120. In this case it is a ratio of peak measured acceleration to a peak reference acceleration of 10~ 6 m s~ 2 ; this is identical to a ratio of root m e a n square (rms) measured acceleration t o an r m s reference acceleration. T h e large amplitude near to 50 Hz is close t o the resonant frequency of the oscillator, fr = ( l / 2 7 r ) ^ / ( 5 / M ) , which is defined as the frequency at which the denominator of Eq. (2.1.3) vanishes, in the absence of dissipation.
Damping
changes t h e frequency location of the peak by a small value, b u t it is crucial for limiting t h e acceleration amplitude at resonance to the value \u>2Fo/Srj\. For a continuous system approximated by a finite number, N say, of un known displacements, t h e quantities 5 , M and C are matrices, and the equation of t h e dynamical system is [D(LJ)]
{U(LJ)}
Nx
Nx1
N
=
[S-iwC-w2M]
{U(L>)}
N xN
Nx1
=
{F}
,
(2.1.5)
Nxl
where [-D(u;)] is t h e dynamic stiffness matrix, {F} is a column vector of known excitations and {u} is a column vector of unknown displacements a n d / o r rota tions. T h e elements of {u} are also called coordinates or degrees of freedom. T h e solution of Eq. (2.1.5) is {«} Nxl
=
[D(u)]-i N xN
{F} Nxl
=
[R{»)] N x N
{F} , N x 1
(2.1.6)
where t h e m a t r i x [i?(w)] is called the receptance matrix. T h e stiffness m a t r i x [-D(w)] m a y be partitioned, as described in Section 1.10. T h e receptance matrix, which is usefully interpreted as t h e response at coordinate i due to unit excita tion at coordinate j , can similarly be partitioned. Further, a reduced dynamic stiffness m a t r i x can be obtained from [/J(u>)] by deleting (N — M) unwanted rows and columns leaving a m a t r i x [r(u)] of order M < N. This matrix is inverted t o give t h e reduced dynamic stiffness m a t r i x [s(w)] for which the eliminated coordinates must be assumed t o be free of prescribed excitations. T h e m a t r i x [Z(u;)] = [D(u>)]/(—iw) is called an impedance matrix, which relates velocities and forces, a n d its inverse, [Z(UJ)]~1
— -\UJ[R(UJ)]
is called a mobility matrix.
Sometimes it is necessary to change from a local coordinate system, such as a rotated axes set, to a global coordinate system.
Let primed quantities
refer t o t h e local coordinate system and unprimed quantities refer to the global
Response of Dynamical Systems
47
coordinate system. Thus,
P'H]
W)
N x N
N x 1
= {F'}
(2.1.7)
AT x 1
is the dynamic stiffness m a t r i x relation in the local coordinate system.
The
relation between coordinates, {u'} = [L]{tt}, where [L] is a N x N m a t r i x of direction cosines, and the requirement t h a t work done by forces is the same in both coordinate systems, viz. {F}T{u}
= {F'}T{u'},
are used to show t h a t the
dynamic stiffness m a t r i x relation in the global coordinate system is [D(u)] N x N
[L]T
{u} = N x 1
p'(u,)] N x N
[L]
{u} = N x 1
{F} , N xl
(2.1.8)
which implies t h a t [£)(u;)] = [Lj^D^Lj^fL] is the dynamic stiffness in the global coordinate system.
2.2
Transient R e s p o n s e Transient response calculations frequently reveal physical features which are
difficult to extract from time-harmonic spectra, so software for computing tran sient responses to a variety of excitations is a necessary and valuable tool for the noise control engineer. T h e m a t h e m a t i c s is straightforward. Let u ( # , / ) be the quantity of interest, for which the solution of the time-harmonic problem for unit excitation, f(t)
= exp(—icot), has been obtained as U(X^UJ) = H (x, u)) exp(—iwt),
where H(xyuj)
(2.2.1)
is the transfer function spectrum at point x. The transient re
sponse for time variation f(t)
= q(t) is given by the Fourier transform oo
/
Q(u;)#(z,u;)exp(-kjt)du;,
(2.2.2)
-co
where QH
1 f°° = 7T / q(t)exp(iu>t)dt,
and
(2.2.3)
CO
/
Q(w)exp(-iw<)dw, -CO
(2.2.4)
Acoustics of Underwater Structures
48
are a Fourier transform pair. Eq. (2.2.2) is a consequence of linearity. The transfer function H(X,UJ), for unit excitation, is weighted by the spectrum Q(w) of the excitation q(t) and the net response obtained by summing over all values of a;. As an example, take q(t) = exp(—iuot) for which Q{u) — 6(u> — u;0); sub stitute this value into Eq. (2.2.2) to give the time-harmonic response u(x,t) — H(x,wo)exp(—iLdot), which is in accord with Eq. (2.2.1). It is desirable to in troduce a time lag to into the equations, if only for the purposes of checking for non-causal behaviour in a computer generated plot. The modified transient response is oo
/
Q(w)H(x,w)exp(-iu)(t
- tQ))du,
(2.2.5)
-oo
so for a causal dynamical system an excitation applied at t — 0 should not produce a response before t — to. For computational purposes, it is desirable to have a library of transient inputs q(t) and their spectra Q(w). For an impulse excitation applied at t — 0, q(i) Q(u)
=
F0S{t),
=
F 0 /2TT.
(2.2.6)
For the Heaviside step function, q(t)
F0
=
' 0
if 0 < t < oo,
if* < 0,
«H = £ .
(2.27)
For a sine wave switched on at t = 0 and off at t — T, u\
- / F0sm(Lo0t) ifO T, Fn <5(w) = T I T ^ (w« + exp(iwT) (iw sin(w 0 r)-w 0 cos(u;0T))). (2.2.8) qK)
The frequency of this sine wave is / 0 = a;0/27r, and the time for a single cycle is t — l//o- For a squared sine wave switched on at t = 0 and off at t = T, m g U
=
/ F osin 2 (u;ot) \ 0
if 0 < t < T, if t < 0 and t
Response of Dynamical Systems
— FQ
Q{")
=
47r(4(jJ2
+
_
2\
49
(~iu) +
ex
P ( i ( ^ ) (iw cos(2u;oT) + 2UJ0 sm(2uj0T)))
iSj(eXp(lU;T)-1)-
<2'2-9)
The time for a single loop is t = l / 2 / 0 , where fQ = u>0/27r. For an attenuated sine wave switched on at t = 0 and off at 2 = T, /.x _ f F0exp(-at)sm(u)0t)
9U
^M
~ 1 0 =
o /
if 0 < tf < T,
if* < 0 a n d * > r , 2°
, 2 x (^o+exp(iAT)(iAsin(u;oT)-a;ocos(a;oT))),(2.2.10)
where A = UJ -f ia. The frequency of oscillation of the damped sine wave is /o = k>o/27T, and the time for a single cycle is t — l//o- For a triangular pulse switched on at t — 0 and off at t = T, (t)
Q(W)
f (2F 0 /T)* I 2F0-(2F0/T)t [ 0
=
=
2^
( 1
~
ifO<* T,
e X p ( i w T / 2 ) ) 2
(2 2 U)
-
- -
For a rectangular pulse switched on at t = 0 and off at t = T, ®
~
F0 ^ 0
Q(")
=
2§j<exp(iwr)-l).
9
if 0 < t < T, if f < 0 or t>
T, (2.2.12)
In certain circumstances it may be desirable to use a narrow rectangular pulse to approximate an impulse excitation, and a wide rectangular pulse to approximate a Heaviside step excitation. A Gaussian amplitude modulated sine wave, qg(t), and a linear swept frequency modulated sine wave, g/(t), which are switched on at t — 0 and off at t = T, are defined as / .v _ f F0 exp(-at2) W)-{ 0
sin(o;o*)
if 0 < * < T, if*<0and*>T,
/001^ ^'Z'L6)
and ,..
f F0s'm(at + bt2)
«'<*> = ( 0
if 0 < t < T.
if*<0and*>T.
(OO-\A\ (2 2 14)
' '
50
Acoustics of Underwater Structures
Figure 2.3: Amplitude spectrum 20 x log |Q(u>)| of a 1000 Hz sine wave pulse on for 1 cycle. For the case of the linear swept sine wave, the instantaneous radian frequency is defined as a + 2bt; thus, if the initial and final frequencies of the sweep are / i and /2, then a = 2irfi and b = 7r(/2 — fi)/T. There are no simple closed form expressions for the transforms Qg(w) and Qi(w), so numerical integration is required. The spectrum of a 1000 Hz sine wave pulse, of unit amplitude and on for one cycle, is shown in Figure 2.3. The first side lobe, at about 2500 Hz, is 18 dB down on the main lobe. A single cycle pulse is used here and in later chapters for numerical examples of transient responses. The response u(x}t — to) can be evaluated by numerical integration, either by using the fast Fourier transform (FFT) algorithm or by using a straightfor ward integration algorithm. The latter method is now preferred: computation times are much lengthier, but the user has the additional flexibility of separately specifying the integration interval AUJ and the interval of the response tabulation At. For the FFT method these constants are inextricably linked by the formula Aw At = 2n/N, where N, usually a power of two, is the FFT order. This requires some trial and error, even by an experienced analyst, before suitable values of
Response of Dynamical Systems
51
Au; and At are obtained. While the straightforward integration algorithm requires considerably more computational effort than the FFT method, computer times are generally in significant compared with those needed to determine the time-harmonic trans fer function H(x,u). This transfer function is usually obtained from a special purpose computer program, the results being stored on a disk file as a table of H(x,u) for K values of tuk in the frequency range (w m i n ,u; max ), outside which H(X,LJ)Q(LU) is assumed negligible. The values of u>k are monotonically increas ing but not necessarily at equal spacing. Values of the transfer function H(X,UJ) at TV > K equally spaced values of frequency, LJJ = (j — l)u;max/(A/r — 1), in the range (0,u; max ), being obtained by quadratic interpolation, say. A table of Q(u>) at the TV equally spaced values of UJJ is obtained either by evaluating an analytical expression or by numerical integration of
Q("i) = 7T i ** Jo
tfWexpKOd*,
(2-2-15)
by using repeated applications of Simpson's rule, described in Section 1.11. Tran sient responses, u(x,t — to), at M equally spaced time values in the interval (*min,Wx), viz- *m = *min + (m - l)(t m ax - <min)/(Af - 1), are calculated by numerical integration of Eq. (2.2.5) with truncated limits. Thus, Q(w)JJ(s,w)exp(-iw(i m -t0))du>.
(2.2.16)
-Wmax
This integral can be rearranged as n(x,tm-t0)= / {S{u>)+S*(u>)) du>, (2.2.17) Jo where S(u) = Q(u))H(x,Lj)exp(—iuj(tm — to)). This avoids computation of Q(w) and H(x,u)) at negative frequencies by making use of the relations Q{—u>) = Q*(w) and H(X,—UJ) = H*(x,u>), which are necessary to produce a real val ued response for a real valued input. The integral is evaluated by repeated applications of the extended Simpson's rule on the product of the N tabulated values of Q(u) and H{x,u), weighted by the function exp(—iuj(tm — to)) whose computation is the most expensive part of the calculation. While the response u(x,t — to) is best obtained by the straightforward in tegration algorithm described above, the FFT method, as described by Cooley
Acoustics of Underwater Structures
52
et al. [2], m a y be desirable when computational times turn out to be excessive. T h e integral to be evaluated is written as oo
S(w)exp(-iwt))dw,
/
-OO
where S(u>) — Q(<jj)H(x,Lo)exp(+iut0). F{tj)
= AuJ2
(2.2.18)
This equation is discretized as
Gkexp(-2mjk/N),
tj = jAt,
j = 0 , 1 , . . . , 7 V - 1,
(2.2.19)
fc=0
with oo
Gk= J2 S(kAu + NpAw).
(2.2.20)
p = — oo
Here, TV is an integer power of two in order to be compatible with the F F T algorithm, for which the sampling intervals in frequency, Au;, and time, At, are inextricably linked by the formula AuAt
= 2-ir/N. Thus, the infinite range of
integration has been divided into intervals of length TV Au; to allow construction of a q u a d r a t u r e formula which requires a single application of the F F T algo r i t h m to evaluate the response at N equally spaced values of the time t. The time series so obtained is periodic, viz.
F(tj)
= F(tj+w),
but provided the
true response decays sufficiently rapidly in the interval t = (0,ATAtf), it may adequately be approximated by the discrete samples obtained from the F F T q u a d r a t u r e formula. Some trial and error is inevitably associated with this F F T method before the constants required for numerical integration are finalized.
The following
suggestions may be found relevant: • Select the sampling interval in frequency, Au;, and the upper limit of inte gration, u> max , either by a guess or from knowledge of the function
S(u).
Choose TV, as a power of two, and At in accordance with the formula AuAt
= 27T/7V.
• Stop the s u m m a t i o n , in Eq. (2.2.20), at the integer value p m a x > 1 which is greater t h a n or equal to u>max/7VAu>. This is likely to re-define the upper limit of integration as u; m a x ==
NAujpmax.
• Use the relation S(—u) = S*(u>) to avoid calculating the spectrum at negative values of frequency.
Response of Dynamical Systems
53
Figure 2.4: Transient acceleration response, in /im s - 2 , of oscillator excited by a 100 Hz unit force which is on for 1 cycle. The excitation switches on at t — 0 and the response has been delayed by to = 50 ms.
• Use not more t h a n the first JV/2, say, values of the calculated time function for plotting, as aliasing might have affected the values at the end of the range. If the time history plot is obviously in error, being significantly non-causal for instance, then perhaps Aw is too large or o; m a x is too small. • W h e n the spectrum S(u>) is computationally expensive, it can be padded with zeros in order to enhance resolution in time. • See also the previous "straightforward method" for details of interpolation and computation of time functions. In Figure 2.4 is given the transient acceleration response of the oscillator to a unit 100 Hz sine wave excitation which is on for just 1 cycle. The output delay has been chosen as * 0 = 50 ms. T h e expected non-causal response arising from the choice of hysteretic damping is evidently of no significance. The transient response is typical of t h a t of a damped system. After an initial "forced" re sponse, of duration 10 ms, the acceleration is an exponentially decaying sinusoid oscillating at the 50 Hz natural frequency of the dynamical system.
Acoustics of Underwater Structures
54
For dynamical responses such as displacement, stress and pressure observed at a finite distance from the excitation, both the straightforward and F F T meth ods described above are unlikely to cause trying problems. For far field sound radiation, it is shown in later chapters t h a t the time-harmonic pressure is of the form p(R, 0, <j>, t) = A(0, >, u>)eXPy^) exp(-iw<) = H(x, u) e x p ( - i ^ ) , (2.2.21) R when the excitation is a unit time-harmonic mechanical force or acoustic source. In this formula k — w/c where c is sound speed. T h e standard reference dis tance is usually taken as R = 1 m, rather t h a n its true but computationally meaningless value, R = oo, for the far field. The transient response is then p(R,0,4>,i-to)=-5
/ Q(u)A(6,<j>,u>)exp(-iu)(t-t0-R/c))du>, R J-oo
from which it is evident t h a t the term exp(ikR) simply causes a delay of t = R/c.
(2.2.22)
in the time-harmonic response
Some conceptual problems may arise in
certain circumstances because causality appears to be violated by large responses occurring before t = to + R/c.
Responses for values of R chosen separately as
Ri and R2 are identical in amplitude but shifted in time by t — (R2 —
Ri)/c,
so the choice of a finite value for R is unlikely to be the cause of apparent non-causal responses. However, supersonic waves travelling on the surface of a radiator can cause radiation which arrives at the far field before the direct travel time t = to + R/c.
This is discussed and illustrated in Section 8.5, in which
sound radiation from a uniform infinite plate is considered. For computational purposes, it is desirable to choose £0 to be sufficiently large to include pressure contributions t h a t can arise from supersonic waves travelling on the radiating structure. For sound scattering, an incident plane wave pulse arriving from the angles (0»,^») is assumed to have pressure +00
/
P(u) exp(—ikcti — it^)du;,
(2.2.23)
-00
where &{ — x sin 0,- cos fa + y sin 6{ sin i + z cos 0t-. This is synthesized from the time-harmonic incident pressure of unit amplitude, Pi(x,y,z,t)
= exp(—\koLi - iut).
(2.2.24)
Response of Dynamical Systems
55
The time-harmonic pressure scattered to the far field is of the same form as the time-harmonic radiated pressure of Eq. (2.2.21), so the transient scattered pressure for spectral amplitude P(u>) is
1 r°° p(R,6,
-
/
P(uj)A(6,<j),u)exv(-iuj(t-tQ-
R/c))du).
(2.2.25)
ft J-oo
In order to provide a reference time for the transient response, surround the scatterer by a close fitting sphere of radius L, centred on the origin. The point on this sphere first met by the incident plane wave is (xs,ys,
zs) — (Lsm6i cos<^-, LsinOi sin fc, Lcos6{).
(2.2.26)
From Eq. (2.2.23), the real valued and thus measurable incident pulse at this point is +oo
/
P(u)) exp(-ikL
- iujt)dLj = q(t), say.
(2.2.27)
-co
Let this time variation be an incoming pulse which switches on at t = 0 when observed at the radial coordinate R — L. In the absence of the scatterer it reaches the origin at time L/c. Comparing this equation with Eq. (2.2.4) gives Q(w) = P(w)exp(-ikL).
(2.2.28)
Thus, Eq. (2.2.25) gives the far field transient pressure as 1 / >+co p(iJ, 6,,t-t0) = - / Q(u)A(6, , u) exp(-iw(t - 1 0 - R/c -
L/c))du,
ft J-oo
(2.2.29) which is the same form as Eq. (2.2.22), but with an additional delay factor t = L/c. For computational purposes, it is is desirable to choose to to be sufficiently large to investigate potential non-causal behaviour. 2.3
Time-Harmonic Power Flow
The physics of power flow in simple dynamical systems has been considered by Goyder & White [3] in a series of papers. In their first paper, closed form expressions are given for the mechanical power transmitted to an infinite plate
Acoustics of Underwater Structures
56
Point connections to other dynamical systems Figure 2.5: Schematic of dynamical system with N nodal points at which other dynamical systems can be attached.
and b e a m by prescribed forces and displacements; in their second paper, power flow to an infinite plate from an attached beam is considered; and in their third paper, power flow in simple isolation systems is examined. Software packages for analyzing complex dynamical systems, using the basic building blocks of point connected simple dynamical systems, are now generally available, so the computation of power flow is particularly simple provided the program output can be reshaped to include both structural displacements and reaction forces. In Figure 2.5 is shown a schematic of an isolated dynamical subsystem which is the kth member of a complex dynamical system comprising an assemblage of point connected subsystems.
At each of the N nodes the subsystem can
be connected to a node on another dynamic system a n d / o r prescribed external forces. A subsystem can be a dynamical system or a fluid. At the j t h connection point on this fcth subsystem there are generally three displacement and three rotation motion coordinates at each node, viz. {ukj}
= (v>kjx, Ukjy, Ukjz , Qkjx, Qkjy, Okjz)
(2.3.1)
and three forces and three moments, which are either reaction forces/moments
Response of Dynamical Systems
57
or prescribed external forces/moments, viz. {Fkj} = (Fkjx,Fkjy,Fkjz,Mkjx,Mkjy,Mkjz)T.
(2.3.2)
From now on the word displacements may imply both actual displacements and rotations, and the word forces may imply both actual forces and moments. The context in which the words occur should render the meaning unambiguous. By using the above equations, the dynamic stiffness equation of the kth dynamical system is obtained as
PM] 6N x6N
M
=
67V x 1
{F}
,
where {u} and {F} are column vectors of the displacements, {uki}, and forces, {Fki},
. . . , {Fk]y},
(2.3.3)
67V x 1 .. .,
{uk^},
respectively.
T h e mechanical power, in subsystem k, dissipated by damping and by trans mission to other dynamical systems, is 1 N Pk = Real - ^{Fkj}T{u*kj}
> 0,
(2.3.4)
J=I
where, for the time variation exp(—itot), {ul} = —icj{«^}. The individual terms of the above equation, viz. Pkj = Real \{Fkj}T{u*kj},
(2.3.5)
have physical meaning as the power associated with coupling node j , and the individual terms of of this equation, viz. Pkjx -
Real -Fkjxu*kjx,
etc.,
(2.3.6)
have physical meaning as the power associated with individual reaction a n d / o r prescribed external forces at the node. The
power balance equation for each subsystem requires t h a t the power
dissipated in the subsystem is equal to the power transmitted into the subsystem minus the power t r a n s m i t t e d out of the subsystem, and this quantity is always positive.
T h e power flow at point j , viz.
interpret, for example:
Pkj,
can be quite complicated to
Acoustics of Underwater Structures
58
• If node j is not connected to other subsystems, but is a free node where external forces {Fkj}
are applied, then positive Pkj means t h a t power is
being t r a n s m i t t e d to subsystem h by the external forces, while negative Pkj m e a n s t h a t power is being absorbed by the external forces. In the latter case it is necessary t h a t subsystem k is connected to other subsystems which themselves are subjected either directly or indirectly to external forces. T h e sum of the separate powers input by prescribed external forces must be positive. • If node j is connected to other dynamical systems, and there are no ex ternal forces applied at this node, then {Fkj}
are reaction forces whose
vector sum over all subsystems t h a t connect at point j must be zero. For subsystem fc, Pkj is then positive if power is being transmitted to it at the connection node j , and Pkj is negative if power is being transmitted from it at this node. If the other subsystems attached to node j are isolated from forces, meaning t h a t they are not directly or indirectly connected to other subsystems with external forces, then Pkj will be negative. If one or more of the attached subsystems at node j are not isolated from external forces, then Pkj can either be positive or negative, as power can either be t r a n s m i t t e d to or from the subsystem at point j . If subsystem k is isolated from external forces at all but connection node j , then Pkj must be positive as power will be transmitted to the subsystem at the node j . • If node j is connected to other subsystems and there are also external forces applied at this node, the {Fkj} are the reaction forces whose vector sum, over all subsystems t h a t are connected to node j , is equal to the prescribed external forces. Hence, the total power transmitted at point j to all connecting subsystems may either be positive or negative. Additionally, the power t r a n s m i t t e d to subsystem Ar, from the other subsystems, may either be positive or negative. For the particular case for which subsystem k is isolated from external forces, except at connection point j , then Pkj must be positive as power will be transmitted to this subsystem. It may help conceptually to create a "null" connection node at a vanishingly small distance from the node j . An example of power flow is shown in Figure 2.6. The oscillator of Section 2.1 is subjected to a unit time-harmonic force. The m a x i m u m power is input at
59
Response of Dynamical Systems
Figure 2.6: Mechanical power, in dB reference 1 picowatt, input to an oscillator driven by a unit time harmonic force. the resonant frequency of the oscillator. The power decibel level is defined as 10 x log \P\ 4-120, i.e. dB reference 1 picowatt where P is defined by Eq. (2.3.4). When a surface 5 surrounds and separates the dynamical systems from a fluid extending to infinity, radiated power values can be obtained from the relation ^rad ~ i^act = « / P(S)^n(s)ds
=
e
PCo /
K($)|2ds,
(2.3.7)
where un(s) is the normal velocity of the surface, p(s) is the pressure on the surface, pc is the acoustic impedance of the fluid, Prad is the resistive power, which is radiated away from the system, and P a c t is the reactive power which is retained by the system. The constant e = Ra — iXa is called the radiation impedance function; it represents energy loss Ra and mass or stiffness loading depending on whether Xa is positive or negative. As the frequency is increased, for a prescribed value of un(s), Ra —> 1 and Xa —► 0. Values of Ra and Xa for simple geometries have been tabulated as functions of frequency, see, for example, reference [4] which contains tables and plots of these functions for the case of a baffled circular piston. Another way of determining the radiated power,
Acoustics of Underwater Structures
60
Prad, for a three-dimensional system, is to note that when the far field pressure is of the form p(R,9,4>) = A(9,tf-?^p-,
(2.3.8)
the radiated power P r a d = I Real / p(s)u*n(s)ds 2 Js
(2.3.9)
becomes P r a d = _ - /^ T U(M)|ssin(0)d0d<£. (2.3.10) 2pcJo Jo The surface of integration is a sphere of radius R — oo with ds = fl2sin(0)d0d<£, and the relation dp{s)/dR = pu>2un(s) has been used to obtain the velocity un(s). References and Additional Reading 1. H.K. Milne, The impulse response function of a single degree of freedom system with hysteretic damping, Journal of Sound and Vibration, 100(4) (1985), pages 590-593. 2. J.W. Cooley et al., The fast Fourier transform algorithm: programming considerations in the calculation of sine, cosine and Laplace transforms, Journal of Sound and Vibration, 12(3) (1970), pages 315-337. 3. H.G. Goyder and R.G. White, Vibrational power flow from machines into built-up structures: Part I, Introduction and approximate analyses of beam and plate-like foundations; Part II, wave propagation and power flow in beam-stiffened plates; and Part III, power flow through isolation systems, Journal of Sound and Vibration, 68(1), (1980), pages 59-117. 4. L.E. Kinsler et al., Fundamentals of Acoustics, (third edition, Wiley, New York, 1982). 5. J.L. Meriam, Dynamics, (SI Version, second edition, Wiley, New York, 1975). 6. K.U. Ingard, Waves and Oscillations, (Cambridge University Press, Cambridge, 1988).
C H A P T E R 3. ACOUSTIC EQUATIONS
3.1
Differential Equation Fluid pressure, p(x, y, z, t), at a fixed point in an acoustic fluid is independent
of orientation. It is defined to be positive when the fluid is being compressed. T h e pressure on a surface located in a fluid causes a stress which acts in the direction of the normal to the surface; the fluid is assumed to slip perfectly over the surface in tangential directions, so no tangential stress is exerted on the surface. A rudimentary derivation of the linear equations of motion proceeds from the fluid element shown in Figure 3.1, all quantities involving second order terms being discarded without comment. Newton's second law of motion applied in the x direction gives d2ux = pdxdydz-^-,
(p(x ,y, z ,t) - p(x + dx ,y, z ,i)) dydz + Fxdxdydz
(3.1.1)
or
dx
'
x
r
at*
when the approximation p(x + dx) = p(x) + dxdp(x)/dx ing equation divided by dxdydz.
Here Fx(x,y,
z,i)
is used and the result
is a body force (force per
unit volume) in the x direction, p is fluid density and ux(x,y)z,t)
is the fluid
displacement in the x direction. Similar equations are obtained for motion in the y and z directions. T h e combined equations give - V P ( x , * ) + F(x,*) = ^ where F = (FXiFy,
,
Fz) is the body force vector and u = (ux,uy,uz)
particle displacement vector.
(3.1.3) is the fluid
This equation can be shown equivalent to t h a t
derived from the conservation of m o m e n t u m . 61
Acoustics of Underwater Structures
62
The mass inside the fixed control volume must also be conserved. The mass per unit time entering through the left hand side surface parallel to the zy plane is m(x,t) = dydzp(x,t)du(x,t)/dt, (3.1.4) and the mass per unit time leaving the opposite side of the control volume is m(x + dx,t) = dydzp(x -f dx,t)du(x
+ dx,t)/dt.
(3.1.5)
The difference between these quantities is the net mass gain per unit time in the fixed control volume, viz. Mx = -dxdydz(d/dx)(p(x,t)dux(x,t)/dt).
(3.1.6)
This must be augmented by contributions to the mass gain from motion in the y and z directions. The total mass gain per unit time is then Mi
=
-dxdydz
((d/dx){pdux/dt)
=
-dxdydzV.(pdu/dt).
+ (d/dy)(pduy/dt)
+
(d/dz){pduz/dt)) (3.1.7)
Figure 3.1: A small fixed volume in space through which fluid moves under the action of pressures p(x) and p(x + dx) on surfaces normal to the x direction. Pressures on other surfaces are omitted for clarity.
Acoustic Equations
63
T h e mass gain Mi is balanced by the rate at which mass increases in the control volume, M2, say, reduced by the rate of mass injection in the control volume, M 3 , say. T h u s , with M2 =
dxdydz
(p(x, y,z,t
+ dt) - p(x, y, z, t)) /dt
=
M3 = dx+dydzdQ/dt, where dQ/dt
dxdydzdp/dt, (3.1.8)
is a source of mass injection, the equation M\ = M2 — Ms gives
dt
y dtj
after dividing by the elemental volume dxdydz.
when the constitutive relation dp/dt
= c2dp/dt
df This equation is written as
is used, and small variations
in the density are neglected compared with the density itself. Here, c is the sound speed in the fluid.
By applying the div operator to Eq. (3.1.3), and
then eliminating the displacement term u using Eq. (3.1.10), the inhomogeneous acoustic wave equation is obtained as
T h e terms on the right side correspond to a distribution of volume displace ment which acts as a monopole and a distribution of applied force which acts as a dipole. Sound arises directly from source distributions in the inhomoge neous wave equation or indirectly from boundary conditions applied, at moving surfaces, to solutions of the homogeneous wave equation. T h e reduced wave equation, for time-harmonic excitation exp(—iwt), is V 2 p ( x ) + k2p(x)
= UJ2Q(X)
+ V.F(x),
(3.1.12)
where k = UJ/C is the acoustic wavenumber, related to the wavelength by A = 27r/k.
Formulae for V 2 p = div(gradp) in cartesian, cylindrical and spherical
coordinates are given in Section 1.4. Thus, the wave equation has the following forms in these s t a n d a r d coordinate systems, d2p d2p d2p + * P = - 4 ^ S ( a j , y, z) 2 + i d 2f + 7T1T dx by d"2
Acoustics of Underwater Structures
64
d2p dr2 82p d#2
2 dp RdR
ldp J _ ^ £ , ^ £ + t 2 = _47rS(r A z) r dr r2 d<j>2 dz2 1 d (. Jp\ 1 d2p _2 . _,_ . .. R2 sinO d0\ 30) R2 sin2fl<9<£2 (3.1.13)
where S is a prescribed source term. These are the inhomogeneous reduced wave equations; when S = 0, the equations are the homogeneous reduced wave equa tions. The time-harmonic factor, exp(—iwt), is generally omitted from solutions of the reduced wave equation. In cartesian coordinates, separated solutions of the homogeneous reduced wave equation are of the form p(x,y,z)
= E(x)F(y)G(z),
(3.1.14)
and are obtained from the differential equations ~ = -^E, axz
^ = -0>F, dyz
£ ? = -72G, dzz
(3.1.15)
for which the constraint k2 — a2— (32 — j 2 — 0 is necessary. This means that if any two of the wavenumbers a, (3 and 7 are known, the third must be obtained from the constraint. For example, if a and /? are known then the third wavenumber is given by 7 = + \f{k2 — a2 — /? 2 ), the sign chosen being a matter of convention which will become clearer in later sections. Solutions of Eq. (3.1.15) are E(x)
=
Ei exp(iaz) + E2 exp(—iaa?),
F(y)
=
Fiexp(i/fy) + F 2 exp(-i/fy),
G(z)
=
Gi exp(i 7 z) + G2 exp(-i T z),
(3.1.16)
where E\, E2l Fi, F2) Gi, G2, are unknown constants found from the boundary conditions and/or radiation condition. Any combination of the "exp" functions is also a solution, such as E = E^sm{ax) -f E4 cos(ax) for example. In cylindrical coordinates, separated solutions of the homogeneous wave equation are of the form p(r,<j>,z)=E(r)F()G(z),
(3.1.17)
Acoustic Equations
65
and are obtained from the differential equations d2E
IdE
/l2
2
2/2xr
,
„
d2F
.
d2G
9„
(3.1.18) for which no constraint is necessary as it has been built into the first of these equations. Solutions of Eq. (3.1.18) are E(r)
=
E1Jn(krr)
+
E2Hn(krr),
F(<£)
=
F x exp(in^) + F 2 exp(-in<£),
G(z)
=
Giexp(iaz) + G 2 exp(-iaz),
(3.1.19)
where kr = + \/(fc 2 ~ a 2 ) . In the first of these equations, any combination of Jn(fcr^) and Yn(krr) can be used instead of Jn(krr) and Hn(Arrr), the actual choice here being a consequence of experience. Any combination of the "exp" functions is also a solution, such as F — Fssm(n<j)) + F4Cos(n)) for example. The constant n is required to be an integer because of the physical requirement F ( 0 + 2TT) = F(<£).
In spherical coordinates, separated solutions of the homogeneous wave equa tion are of the form p(fl, 0, ) = E(R)F(6)G(<j>), (3.1.20) and are obtained from the differential equations
1
d
(Ks i n 0 ^ ) + ( n ( n + l ) - m 2 / s i n 2 0 ) f = 0, sin 6 de d$ d2G = - m 2 G , 2 d
(3.1.21)
for which no constraint is necessary. Solutions of Eq. (3.1.21), which are finite at 6 = 0 and JT, are E(R) F(B) G{<j>)
=
Eiin(kR) +
=
E2hn(kR),
F^icosO), =
Giexp(im^) + G 2 exp(-im^).
(3.1.22)
The constant m is required to be an integer because of the physical requirement G{ + 2ir) — G{4>). The constant n is required to be an integer because of the
Acoustics of Underwater Structures
66
physical requirement for finite values of F(9) at 9 = 0 and 9 - TT. Again, any combination of the "exp" functions is also a solution, such as G — G^sm.{rn<^) + G4 cos(m<j)) for example.
3.2
Plane Wave Solutions In cartesian coordinates (z, y, z), a time-harmonic plane wave of amplitude
A arriving from infinity at the angles 9{ and
= Aexp(—ikxsin9i
cosi — ikysin9i
s i n ^ — ikz cos 9i),
(3.2.1)
which is an incoming wave solution of the reduced homogeneous wave equation. In cylindrical coordinates, (r, ,z), Eq. (3.2.1) is rearranged as Pi(r, ,z) = Aexp(—ikzcos9i)exp{—ikrsin9i
cos( — <j>i)},
(3.2.2)
by making use of the relations in Table 1.2. This can be expressed as a complex Fourier series in the angle 0, whose coefficients are found from the Bessel function integral of Eq. (1.6.8), giving 00
Pi(rt,z) = Aexp(-ikzcos
9i)
^
(-i) | n | J| n |(fcrsin0;)exp(in(<£ - & ) ) ,
n = —00
(3.2.3) after a minor rearrangement of terms. In spherical coordinates, {R,9,), Eq. (3.2.1) is rearranged as p(R,0,(j))
= Aexp(—ikRcos6i cos9)exp(-ikRsm9sm9i
by making use of the relations in Table 1.2.
cos(<£ -
fc)),
(3.2.4)
For the specific case of a wave
incident along the z axis, in the direction of increasing 2, it is only necessary to set Oi = 180°. T h u s , Pi(R,0,) = Aexp(+ikRcos9)}
(3.2.5)
which is independent of the angles > and fc. This can be expressed as a Legendre series, by using Eq. (1.8.8) and (1.8.9), as 00
Pi(R,
0,^>) = AJ2 in(2n + l)P„(co8 9)jn(kR), n=0
(3.2.6)
67
Acoustic Equations
Figure 3.2: Plane wave incident at the angles 0,- and fa.
which formula is used later for predicting scattering from spheres.
3.3
Green's Function in Cartesian Coordinates T h e free-space Green's function is defined here as the outgoing wave solution
of the reduced wave equation -47r6(x-xo)6(y-yo)6(z-z0), ■ &
+
^
+
&
+
k
^
G
^
(3.3.1)
^
where R = ( # , y , z) is the location of a field point and Ro = (£o>yo,^o) is the location of the spherically symmetric concentration of volume displacement. By outgoing wave is meant a wave whose pressure at large R is proportional to exp(i&R)/R, where R2 = x2-\-y2 + z 2 ; it does not have a component proportional to exp(—ikR)/R,
which is a wave coming in from infinity. Thus, the Green's
function is required to satisfy the Sommerfeld radiation condition
fi-oo
\
dR
- ikp(R)j = 0.
(3.3.2)
Acoustics of Underwater Structures
68
a2+02>fc2
*-*o<0
z-zo<0
« 2 +0 2 <Jfc 2
Figure 3.3: Integration contour for A integration in Eq. (3.3.4). The symbol x denotes the poles, and the symbol o denotes poles lifted off the real axis by the e-prescription. By making use of the three-dimensional Fourier transform pair G(R,Ro) = ^ 3 / / / G<(a,/?,A,Ro) =
/ / /
G t (a,/?,A,R 0 )exp(iax + i/?y + iAz)dad/?dA, G(R,R0)exp(-iaz-i/fy-iA;?)dzdydz,
(3.3.3)
the general solution of the reduced wave equation is obtained as +0
f ° 0(R,R„,= i / / / _ t
exp{ia(x - xQ) + \(3{y - y0) + \\(z - zQ)} dad/?dA. a 2 + /?2 + A2 - k2 (3.3.4) The Green's function in this definition is a generalized function because the con straint of a radiation condition is required to make it explicit. In its stated form it encompasses both outgoing and incoming waves, depending on how singular ities in the integrand are dealt with. In many problems there is a plane boundary perpendicular to the z axis, say, on which boundary conditions must be satisfied. In such a situation it is helpful to reduce the dimensionality of the integral by explicitly evaluating the
Acoustic Equations
69
A integral. This integration may be accomplished by choosing a contour in the A plane which depends on the sign of z — z 0 , viz. for z — z0 > 0 the contour is closed in the upper halfplane, while for z - z0 < 0 the contour is closed in the lower halfplane. Further, when k2 > a2 + /32 the integrand has poles on the real axis, at A = ±y/(k2
— a2 — /32), and the integration contour must be indented to
avoid passing through t h e m . T h e indentations are not arbitrary because of the physical requirement of outgoing wave solutions only. The radiation condition can be simulated mathematically by setting the wavenumber k = k(l -f ie), cor responding to a complex wave speed c = c(l — ie), where e is a vanishingly small positive constant. This e-prescription forces the "real" poles off the real axis to allow an unambiguous evaluation of the integral by the residue theorem. Phys ically it means t h a t incoming waves with amplitude proportional to exp(—ikR) are excluded, as will become evident later. The contours of integration with poles moved j u s t off the real axis are shown in Figure 3.3. Application of the residue theorem gives G(R,R0) = J_ //+c°«xp(io,(,-,0) + iflg-a») + G ( R , R o ) = _L f[+~exP(ia(X-X0) 27rJJ_00
+
fr('-«»»dttd/?t
iP(y-y0)-i7(Z-z0))dad^ 7
Z>Z0,
for
^
g <
^
(3.3.5) or, by combining these equations, for all values of z, G(R,R0) = -
/
/+°°
eW
{MX
~
X0)
+ iPiV
"
V0) + i7l(Z
~ Z°)l) dad/?, (3.3.6)
where 7 = +y/(k
2
2
2
- a - /? ), with Imfr) > 0, Re(7) > 0. T h e function
is interpreted as (z — z0)sgn(z
\z-z0\
— ZQ).
T h e simple form of the Green's function is now obtained by evaluating the double integral in Eq. (3.3.6). First transform the equation to polar coordinates using the substitutions a = s cos , f3 = s sin >, x — XQ = t cos 0, y — yo = t sin 0, (x — XQ)2 + (y - yo)2 = t2 and dad/? — sdsdcj). Secondly, use Eq. (1.6.8) with n = 0, to evaluate the <j> integral, giving x p 1( --\z | z --z oZQ\yys| \ / ( * 2 - ^K) )M /•oo eexp G(R,R0) = / i , ,„ >-MU)s&s. n
(3.3.7)
Acoustics of Underwater Structures
70
This integral has a branch point a t s = &, and the contour must be indented t o avoid it. T h e e-prescription comes t o the rescue again; by setting k = k(l -f ie), the branch point is lifted above the real s axis, which removes it from the real axis, or equivalently indents the contour below the real axis. This is a standard integral, given by Eq. (1.6.9), yielding G(R,Ro) =
eXP
^|RRofol)
(3.3.8)
as the Green's function with | R — R o | = \/{{x — #o) 2 + (y — Vo)2 + (z — z$)2}. T h e Green's function in this form is the pressure a t (x,t/, z) caused by a unit time-harmonic monopole located a t (a?o,yoj^o)- It satisfies the Sommerfeld ra diation condition given by Eq. (3.3.2). In formulations in which the constant Air is not present on the right hand side of the reduced wave equation, the Green's function in Eq. (3.3.6) and (3.3.8) must be divided by the constant 4TT.
3.4
Green's Function in Cylindrical Coordinates T h e free-space Green's function is defined as the outgoing wave solution of
the reduced wave equation,
(3.4.1) which satisfies the Sommerfeld radiation condition. R = (r, <£, z) is the location of the field point and Ro = (ro, o, zo) is the location of the spherically symmetric concentration of volume displacement. By making use of a Fourier series transform in the circumferential coordinate <j), a Fourier integral transform in the axial coordinate z, and a Hankel transform in the radial coordinate r , viz. 1
"w
y-t-OO /»00
G ( R , Ro) = — V] e x p ( i n ^ ) / 2,r
-1
„^oo
J-°o
/
G«(£, n, a, R 0 ) J „ ( £ r ) e x p ( i a z ) £ d £ d a ,
Jo
/*+oo p2ir /»+oo
Gt(£, n, cv, R 0 ) = — / / / 2irJ_00 J0 J0
G ( R , R 0 ) J n ( £ r ) exp(—in<j) — iaz)rdrd)dz,
(3.4.2)
Acoustic Equations
71
the general solution of the reduced wave equation is obtained, after some sim plification using the differential equation satisfied by the Bessel function, viz. d 2 Jn(£r) 1 + 9r2
flJn(fr) 2 + (* -
dr
n
2
2
/ r ) J n ( ^ ) = 0,
(3.4.3)
as G(R,Ro) = - £
exp{in(^-^o)} /
n = -oo
/
Jntfr0)Jn(£r)^g^^d£da.
J-coJO
?
~(«
-a
j
(3.4.4) In many cases of interest there are cylindrical boundaries, defined by a con stant value of the coordinate r, on which boundary conditions must be satisfied. In this case it is desirable explicitly to evaluate the £ integral
The e-prescription is again used to lift the pole at £ = +y/(k2 — a2) off the real axis when k2 > a 2 ; this is equivalent to indenting the £ integration path below the real pole. The standard integral of Eq. (1.6.11) with 7 = \J(k2 — a 2 ), Im(7) > 0 and Re(7) > 0, enables the Green's function to be found as 00
G(R,R0)
=
-
£
exp{in(<^-^ 0 )} x
n = — 00
/ )
J|n|(7n))H| n |(7r)exp{ia(2: - z0)}da,
for r > r0
J| n |(7r)H| n |(7r 0 )exp{ia(2: - z0)}da,
for r 0 > r
J—00 +00
/
-00
These formulae are of prime importance when analysing acoustic radiation from cylinders. For the special case of the monopole being on the z axis, r 0 = 0, the Green's function must be axisymmetric, which means that the n = 0 term in the summation, in the first of Eq. (3.4.6), alone contributes: thus, by taking a limit of this equation, with n — 0, and VQ —► 0, •
G(R, Ro) = x /
/*+oo
H ^ ( 7 r ) exp{ia(z - z 0 )}da.
(3.4.7)
Acoustics of Underwater Structures
72
For the case of the observer rather than the monopole being positioned on the z axis, the analysis is much the same. The Green's function is given by Eq. (3.4.7) in which r is replaced by r 0 , as would be expected by directly appealing to reciprocity. For problems where a plane boundary perpendicular to the z axis is present, on which boundary conditions must be satisfied, it is desirable to perform the a integration in Eq. (3.4.4), which is written as Tt u c\ /+°° exp{ia(z-zo)} ^^0,4,0 = 7 ^ g2_(t2-tt2)d«-
,„ A ^ (3-4-8)
The contours used for this a integration are identical to those used for the cartesian case when evaluating the A integration of Eq. (3.3.4), viz. those shown in Figure 3.3 with A changed to a, and a2 + f32 changed to £ 2 . The integral is evaluated by a direct application of the residue theorem, giving K u c\ .expjilz-zoly^P-^2)} /(z, z0> * , 0 - TTI ^ ( p _ a ■
(3-4.9)
The Green's function is thus rearranged as G(R,R0) = i £
exp{in(*-* 0 )} / \ ( f r > ) J n ( M ^ { i | * J ^ .
^
W
(3.4.10) Eq. (3.4.6) can be reduced to the simple form of the Green's function by mak ing use of a special case of the Bessel function addition theorem of Eq. (1.6.7), viz. XTC1)/ H
\
o V i ) =
V^ n
r
/JL
JL M /
I^exp{m^-^)}(
J
n(T r )Hn(T^o),
Jn;7ro)Hn(Tr),
for r0> f o r r
r,
>ro,
(
...
C3-4-11)
where ri = ^ { r 2 + r g - 2 r r 0 c o s ( ^ - ^ o ) } = y/{(x - x0)2 + (y - y 0 ) 2 }.
(3.4.12)
The Green's function is then obtained as i f+co G(R,Ro) = ^ / H0(7ri)exp{ia(z-z0)}da.
(3.4.13)
Acoustic Equations
73
This is a standard integral, given by Eq. (1.6.10), which reduces to the free-space Green's function G(R,Ro) = ^ f f i ^ ,
(3.4.14)
with | R - R o | = \j{r2 + r2Q - 2rr0 cos( - <£0) + (z - z0)2}.
3.5
(3.4.15)
Green's Function in Spherical Coordinates
The free-space Green's function is defined as the outgoing wave solution of the reduced wave equation, f 92
2
9
1
d ( .
-4TTS(R
n
0 \
1
d2
,2\ „
/ n
„
x
- R0)6(6 - 0Q)8((j> - <j>Q)/R2 sin 0,
(3.5.1)
which satisfies the Sommerfeld radiation condition. R = (R, 0, >) is the location of the field point and Ro = (Ro, #o> (J>Q) is the location of the spherically symmet ric concentration of volume displacement. The Green's function is represented by a Legendre series transform in the coordinate 9, a spherical Bessel transform in the coordinate R, and a Fourier series transform in the coordinate <j>, viz. nr n oo G(R,Ro) = ^-5>os(m(^-<£o))X>"(«>s0)x m =0
n—0
/»oo
Gt(t,n,m,R0)
= /»7T
/ Gt(Z,n,m,Ro)UmZ2<%, Jo [2em2n + l(n-m)\ f2* ^ - yj cos(m(4> - *,)) x g (n + m o /*00
/ P™(cos0)sin0 / Jo Jo
G(R,R o )jn(£#)# 2 d#d0d<£. (3.5.2)
Recall that P™(cos#) = 0 for m > n. The general solution of the reduced wave equation is obtained, after some simplification using the differential equation satisfied by the spherical Bessel function, viz.
d
~¥&1 + f ^ P + (*2 - n(n + W ^ K * ) = °-
(3-5-3)
Acoustics of Underwater Structures
74
as n
G(R,Ro)
=
oo
- Y : y > m ( 2 n + l)f-^cos(m(«i-<M)x m=0n=0
P ? (cos fl)P? (cos g0) r
ini n R)
^ £ e
(3-5.4)
If there is a spherical boundary on which boundary conditions must be satisfied, it is advantageous to do the £ integration. The identity of Eq. (1.7.9) is now used to give the outgoing wave representations n
oo
e
(
2n
__ \\
G(R,Ro) = it J2 £ ™( + ^ " + Z ! c o s ( T O ^ ~fo))x m=0n=0
These equations are indirectly reduced to the simple form of the Green's function by using the method described by Junger & Feit [1]. First, by making use of the addition theorem for spherical Bessel functions, given by Eq. (1.7.8), the simple form of the Green's function is expanded as exp(ifclR-Rol) |R-R 0 |
=
^ ^
}
v
f i»(J^)hn W \ }n(kR)hn(kRo)
;
for Ro
where |R-Ro|
=
^(iE 2 + iJ§-2iii2ocos*),
cos\I>
=
cos 0 cos #o +sin0sin0 o cos(0 — 4>o)-
(3.5.7)
The Legendre polynomial addition theorem, Pn(costf) = Y, emf!--^K(cos6)P™(cos60)cos(m(<j>-<j>0)), (n -\- m)\
(3.5.8)
m=0
is then used to replace Pn(cos \£) in Eq. (3.5.6). The resulting formulais identical to Eq. (3.5.5), thus G(R,R0)-
| R
_
R Q |
.
(3.5.9)
Acoustic Equations
75
W h e n the monopole is located on the positive z axis, 0O = 0, the problem becomes independent of the angle <j), so the m = 0 term alone contributes. In this case
G(R,R0,
= a £ > + I>P.(„,>{ WJWgj £ * < * (3.5.10)
with | R — R 0 | = \f{R2
+ RQ — 2RR0 COS 0). This is simply a rearrangement of
the addition theorem of Eq. (1.7.8).
3.6
Arbitrary Source Distribution A number of different forms of the free space Green's function for the reduced
wave equation have been obtained in the previous sections. These represent the pressure field of a monopole source located (a?o> yo> viz., G(R,Ro) = ^ | f c _ M ,
(3.6.!)
where (#, y, z) is the observation point and | R - R o | = V { ( x - ^ o ) 2 + (2/-2/o) 2 + ( ^ - ^ o ) 2 }
(3.6.2)
is the distance between the source and observation point. For an arbitrary source distribution, S(x} y,z)y
as given in Eq. (3.1.13), the pressure field is obtained by
superposition as p,(R)=
/
5(^i,t/1,^1)G(R,Ri)dVi,
(3.6.3)
JVi
where V\ is the region occupied by the source. As a check, take 5 ( R ) as <5(R—RQ) to give t h e Green's function of Eq. (3.6.1). For the case of a body force distribution, the source function is obtained from Eq. (3.1.11) as 5(R) - ^ V . F ( R ) ,
(3.6.4)
47T
and the pressure field is pg(K)
= z l f G^ROVi-FfROdtt, 4?r JV
(3.6.5)
Acoustics of Underwater Structures
76
where the subscript on the div operator denotes differentiation using the R i = (xi,yi,zi) coordinates. For the particular case of a point force F = Fo#(R — R 0 ) located at Ro, the properties of the delta function, and the expansion of div(\PA), as given in Eq. (1.4.5), can be used to obtain the pressure field as pg(R) = ±!-Fo.VoG(R, Ro). In cartesian coordinates, for which R = (x,y,z) formula is made explicit as x
+1„ ^
(3.6.6)
and Ro = (#o,yo,
/exp(ifc|R-R0|)\
„,(*,,, z) = ^-Fo.Vo (
P
/0flf7N
(36-7)
| R ' _ R o | "} •
where Fo = {Fox, Foy, Foz}T is the vector of field point amplitudes. The grad operation of differentiation is is facilitated by noting that dG(R,Ro) dx0
= ik
A _ _J__\ exp(ik\K-R0\)dD V i*|R-Ro|/ |R-R0| dx0'
g g
etc., where D2 = | R - R 0 | 2 = (a: - x0f + (y - y0)2 + (z - z0f
(3.6.9)
and dD/dx0
= -(x - x0)/D.
(3.6.10)
The pressure due to the point force is then p ( x v z )
pg{x,y,z)
-
Zltd l WifclR-Rol) x ^ \l |R_R0| iA;|R_Ro|y) (ar-gp) , „ (y-yo) , „ (z-zp)
Fox
W^\
+ 0y
W^\
+ 0z
\
W^\)'
{
,,ft11v
]
which comprises a sum of three dipole point sources. A double divergence term can be added to the right hand side of the wave equation, given by Eq. (3.1.11), to augment the source description. This is —d2Tij(x.,t)/dxidxj for which summation is over the repeated subscripts i and j . Here, 7}j is the Lighthill stress tensor which is central to hydroacoustic and aeroacoustic noise generation by turbulence sources. Only six of the nine components of T»j(x,tf) are independent because it is a symmetric tensor, which
Acoustic Equations
77
may be shown by considering the moments acting on a small volume of fluid. When the source term 7}j(x,*) is concentrated at a point, the sources are called lateral quadrupoles when i\■£j , and are called longitudinal quadrupoles when i = j . The theory of sound sources is given in the standard account of the subject by Dowling and Ffowcs Williams [2]. This is a definitive introduction to the theory of turbulence sources and sources in motion. 3.7
Arbitrary Boundaries
When boundaries, S say, are present the free space pressure field pg(R) must be augmented by a solution ps(R) of the homogeneous equation, giving a total pressure p ( R ) = p 5 ( R ) + p s (R).
(3.7.1)
The total pressure p(R) is required to satisfy the boundary conditions, which can be hard, dp(K)/dN = 0, or soft, p(R) = 0, or mixed, ap(R) + j3dp{K)/dN = 0. Here, d/dN is differentiation in the direction of the outward normal to the boundary. If the boundaries conform to separable geometries, analytical solu tions can usually be found. If the boundaries are complex, then it is generally necessary to proceed via the Helmholtz integral equation and/or the finite ele ment method. In the absence of a source excitation, pg — 0, and any sound field must therefore be produced by motion of the boundary. If the boundary moves with displacement normal to the surface, WN> say, then in the absence of body forces, the time-harmonic boundary condition is obtained from Eq. (3.1.3) as ^ ^ % , R o n 5 .
(3.7.2)
This boundary condition is of fundamental importance as it links surface motion to surface pressure. 3.8
Helmholtz Integral Equation
A special equation in acoustics is the Helmholtz integral equation which is derived from the reduced wave equation by making use of Green's second identity. Consider the region V\ between a closed surface S 0 , without curvature
Acoustics of Underwater Structures
78
discontinuities, and a large sphere Soo, centred at the origin and enclosing So, the geometry being shown in Figure 3.4. Let R be an arbitrary field point vector (x, t/, z) anywhere inside Soo ; Ro the field point vector (xo, yo}Zo) on the surfaces So and Soo*, and R i the field point vector (#i, yi, *i) anywhere in the region Vi. Take *(Ri)=p(Ri), (3.8.1) satisfying the reduced wave equation V ? * ( R i ) + Jb 2 *(Ri) = - 4 T T S ( R I ) ,
(3.8.2)
where S ( R i ) is a source distribution inside V\ and the operator Vf is taken with respect to the R i coordinates. Take * ( R i ) = G(R, R i ) = exp(iib|R - R x | ) / | R - R x |,
(3.8.3)
which is the free-space Green's function where |R— R i | denotes distance from the point R to the field point R i . This function satisfies the reduced wave equation V ? « ( R i ) + fc2tf (Ri) = -4TT<5(R - R x ). (3.8.4) Thus, noting that the normal NQ is drawn into V\ but out of So, Green's second identity, obtained from Eq. (1.5.5), becomes
-4TT / S ( R i ) G ( R , R i ) d V 1 + 4 7 r / p ( R x ) ( 5 ( R - R ^ d V i . Jvl Jvx
(3.8.5)
The surface integral over the boundary Soo vanishes, when the radius of the enclosing sphere goes to infinity, provided the Sommerfeld radiation condition on the function p is satisfied, viz.
&K^-
itp(R) =o
) '
(386)
--
where R is the spherical radial coordinate. This condition ensures that p(R) is an outgoing wave only, decreasing at large distances at least as fast as | R | _ 1 .
Acoustic Equations
79
Figure 3.4: Geometry for the Helmholtz integral equation. Note that the direction of the normal N0 is into Vj. When the properties of the delta function are used, Eq. (3.8.5) becomes
k S^G^W
+ =
H
(P
f p(R), *M*), ^ 0,
- G ( R , R „ ) ^ ) dS.
R exterior to 5 0 , Ro„S„, R interior to 60 •
(3.8.7)
This is the Helmholtz integral equation whose numerical solution for an axisymmetric boundary is discussed in Sectiow 14.3. When surface curvature discontinuities are present, the Helmholtz integral equation must be reformulated, as describsd by Bojarski [3]. Arising from the Hel.holtz integral equation are the "jump" properties os the inregral operatorsH Lk(p,R)
=
j " /
p(Ro)G(R,R0)dS 0 ,
M*{PjR)
=
^^ / R ( R o ) 9 G ( " - ; R o ) d 5 0 .
(3.8.8)
If Ro denotes a value of R on the surface So, R+ the limit of an operator as R
Acoustics of Underwater Structures
80
approaches R 0 from outside So, and R _ the limit of an operator as R approaches R 0 from inside 5o, then L * ( p , R o ) = Lk(p,B,+)
= Ljb(p,R-),
AMfc(p,R0) - ^Mfc(p,R+) = r\
r\
1
-^Mk(P}R_), /)
1
— L * ( p , R o ) = ^ L , ( p , R + ) + -p(Ro) = ^ r L * ( p , R - ) - ^ ( R o ) , M*(p, Ro) = Mk(p, R + ) - ^p(Ro) = M fc (p, R _ ) + ^p(Ro).
(3.8.9)
J u m p properties are required when solving a variant of the Helmholtz integral equation introduced to overcome certain problems associated with its numerical implementation; see, for example, the paper of Burton & Miller [4].
References and Additional Reading
1. M.C. Junger and D. Feit, Sound,
Structures,
and Their
Interaction,
(second edition, T h e M I T Press, Cambridge, Massachusetts, 1986). 2. A.P. Dowling and J . E . Ffowcs Williams, Sound and Sources of Sound, (Chichester: Ellis Horwood, 1983). 3. N.N. Bojarski, T h e scattering integral equation for surfaces containing curvature discontinuities, Journal of the Acoustical
Society of
America,
7 4 ( 6 ) (1983) pages 1880-1882. 4. A.J. Burton and G . F . Miller, T h e Application of integral equation meth ods to the numerical solution of some exterior boundary-value problems, Proceedings of the Royal Society of London, A 3 2 3 (1971) pages 201-210. 5. E A . Skelton, Free-space Green's functions
of the reduced wave
equation,
(Admiralty Marine Technology Establishment, Teddington, Middlesex, A M T E ( N ) - T M 8 2 0 7 3 , 1982). 6. L.E. Kinsler et al., Fundamentals
of Acoustics,
(third edition, New York:
Wiley, 1982). 7. D.G. Crighton et al., Modern Methods in Analytical
Acoustics,
Lecture
Notes, (Springer-Verlag, Berlin, 1992). 8. P.M. Morse and K Uno Ingard, Theoretical versity Press, Princeton, 1968).
Acoustics,
(Princeton Uni
Acoustic Equations
81
9. J. Lighthill, Waves in Fluids, (Cambridge University Press, Cambridge, 1978). 10. F.J. Fahy, Sound and Structural Vibration: Radiation, Transmission and Response, (Academic Press, London, 1985).
CHAPTER 4. SCATTERING FROM H A R D A N D SOFT S T R U C T U R E S
4.1
Planar Surface
A plane wave is incident at angles 9{ and i on a planar boundary z = 0, as shown in Figure 4.1. Two types of boundary are considered: the hard boundary, also called rigid immovable or Neumann boundary, and the soft boundary, also called pressure release or Dirichlet boundary. The equation of the incoming plane wave is given in Section 3.2 as Pi(x, ?/, z) = Aexp(—ikxsinOi
coscfo — ikysinOi sinfc— ikzcos 6i).
(4.1.1)
The wave reflected from the planar surface must have the form Ps(x, 2/> z) — B ex.p(—ikx sin0i cos <j>i — ikysinOi sin<j>i + ikz cosOi)^
(4.1.2)
which is a wave propagating away from the surface, at angles ic — 6i and <^, with amplitude B. This is a simple geometric reflection for which, with the exception of normal incidence, there is no back-scattering in the direction of the incident wave. The total pressure anywhere in the upper halfspace is p(x, y, z) - pi(x, y, z) + ps(x, y, z).
(4.1.3)
When the boundary at z = 0 is hard, the acoustic particle displacement, normal to the surface,
^(,,y,:)4^£), pu?z
(4.1.4)
oz
must vanish on the surface itself. It is trivial to show that this requires B — A, i.e. the amplitude of the reflected wave is equal to the amplitude of the incident 83
Acoustics of Underwater Structures
84
wave. On the surface itself the total pressure is p(x, t/, 0) = 2^4exp(—ikxsinOi cos<^- — iky sin 9{ sin >;),
(4.1.5)
which is twice the pressure of the incident wave alone. W h e n the boundary at z = 0 is soft, the total pressure on the surface vanishes. This requires B = —A, i.e. the amplitude of the reflected wave is equal to the amplitude of the incident wave, but in this case there is a phase change of 180°. T h e total pressure on the surface vanishes, but the displacement there is Wz(x,y,
0) =
—2ifc^4 cos 62 -exp(—ikx puj
sin 0{ cos fa — iky sin 9i sin^,-),
(4.1.6)
which is twice the particle displacement of the incident wave alone. W h e n the excitation is a monopole of amplitude A, located at the point (so,2/o,2o), viz. exp(ifc|R-R0|) p t - ( R , R Q ) = i4|R-Ro|
(4.1.7)
Figure 4 . 1 : Sound scattering by hard/soft planar surface with plane wave and monopole excitations.
Hard and Soft Structures
85
with |R - R 0 | = y/{(x - x0)2 + (y- y0)2 + (z - z0)2}, the methods of Sec tion 3.3 are used to express the sound field as a Fourier transform,
M*, y,z)=£ r r «p{i*(»-«o)+My-*)+i^-z.)}
for 2 >
InJJ-oo 7 i ^ /V* 0 0 e x p { i a ( ^ - ^ 0 ) + i/?(y-y 0 ) - J7(*-*o)} -dad/?, for z < ZQ> ^JJ-oo 7 (4.1.8)
where 7 = y/(k2 - a 2 - /32). The total pressure is the sum of the free-field pressure due to the monopole, pi, and the pressure scattered from the planar boundary, ps say, as given by Eq. (4.1.3). The scattered pressure is assumed to have the transform representation ps{x,y,z)=—
V ;
/
yx
—
2TT J J_OQ
^dad/?,
(4.1.9)
7
which comprises a continuous spectrum of outgoing waves. When the boundary at z = 0 is hard, the acoustic particle displacement, normal to the surface, as given by Eq. (4.1.4), is required to vanish on the surface itself. By using the second of Eq. (4.1.8), this requires B(a) = L4exp{-iaz 0 -ifiyo + i7*o}>
(4.1.10)
giving Ps(x^z)
lA f / + ° ° exp{ia{x - x0) + i/?(y - y0) + ij(z + z0)} = - j j ^ dad/?, (4.1.11)
which is valid everywhere in the upper halfspace. This is simply Pj(R
,Rl)
=
^
«
^
,
(4.1.12)
with | R - R i | = y/{(x - x0)2 + (y- yo)2 + (z + z 0 ) 2 }, i.e. it is an image source of the same amplitude as that of the monopole, with apparent location z = — z0 in the lower halfspace. On the boundary itself, the total pressure is p(X:
y, 0) = g
/ f_°°
6Xp{ia(X
"
X0) + i/3(y
"
V0) + iyZ }
°
dad/?,
(4.1.13)
Acoustics of Underwater Structures
86
which is double the pressure of the incident wave alone. W h e n the boundary at z — 0 is soft, the pressure on the surface at z — 0 vanishes. It is straightforward to show t h a t this requires / « -~ x
. exp(ifc|R— R i | )
p,(R, Ro) - -A with | R - R i | = y/{(x
jR_Rl|
,A++A\
>
(4-L14)
- x0)2 + (y - y0)2 + (z +
of the same amplitude as t h a t of the monopole but phase changed by 180°, with apparent location z = — ZQ in the lower halfspace. T h e far field pressures of the hard boundary can be obtained by expanding the distances |R— R o | and | R — R i | for large R . Thus, | R - Ro|
~
R(l - xxo/R2
=
R—xosinOcosij)
where R — yj{x2 + y2 + z2).
- yyo/R2
-
zz0/R2)
— yosmOsincj) — ZQCOSO,
(4.1.15)
A similar expression is obtained for | R — R i |
but with ZQ replaced by — ZQ. T h e far field pressures, for the case of the hard boundary, are then obtained by substituting these expansions into Eq. (4.1.7) and Eq. (4.1.12). T h u s , ext) i\k RJ ) Pij(R, 0, (j>) = A exp{—ifc(#o sin 0 cos <> / 4- 2/o sin 6 sin <j> -f ZQ cos#)}, (4.1.16) and psf(R,0,
= A
exD( \k
RJ
i
exp{—ifc(o?o sin 0 cos 0 - f y o s i n ^ s i n 0 — zo cos#)}. (4.1.17)
T h e total pressure in the far field is pj(R,
0, ) = Pif(R} 0, (j))-\-psf(R,
0, ). This
pressure has a spectrum comprising a series of equally spaced peaks and nulls caused by constructive/destructive interference between the actual and image sources. W h e n the boundary is soft, then it is only necessary to change the sign of the far field scattered pressure, p 5 / , in which case peaks and nulls in the far field pressure are reversed relative to those of the hard boundary. T h e far field pressures stemming from monopole excitation may also be obtained by the m e t h o d of stationary phase, which is described in Section 1.9. In order to illustrate an application of this important method, the integral /» y + oo
1=
/ ( a , / ? ) e x p ( i a x + i/fy + i7z)dad/?
(4.1.18)
Hard and Soft Structures
87
is considered, where 7 = + \/(k2
— a2 — /? 2 ). This integral is written in the form
of Eq. (1.9.7), after changing from cartesian to spherical coordinates. Thus, r
7 =
y+00
I I
f(«>P)&w(iX9(<*,l3))dadl3,
(4.1.19)
where g(a,/3)
= asin0cos<£ + /?sin0sin<£ + 7 c o s 0 ,
X = R.
(4.1.20)
T h e stationary phase point (ao, /?o) is found from the simultaneous vanishing of the derivatives -^— — sin#cos> — a cos 0 / 7 , da
— — sin 9 sin — (3 cos 9/j. op
They vanish at values ao = fcsin#cos> and (3Q — #(ao,/?o) = k, and 7 = kcosO.
fcsin#sin0,
for which go =
Also required are second derivative functions,
^ - | = - cos 0 / T - a2 cos 0 / T 3 ,
- ^
= - cos 0 / T - /? 2 cos 0 / 7 3 ,
= -a/?cos0/73,
^
(4.1.21)
(4.1.22)
which are evaluated at the stationary phase point (ao,/?o) as #11 = —(1 -f t a n 2 9 cos 2 >)/&, gf12 = -tan 2 0sin<£cos<£/fc,
#22 = —(1 + t a n 2 9 sin 2 0)/fc, 911922 - 9i2 = l / & 2 c o s 2 0 .
(4.1.23)
All the ingredients are now present for evaluating the integral, in Eq. (4.1.18), for a large value of R, by direct application of Eq. (1.9.14). Thus, r
I
=
/
r+00
/
f(a, (3)ex])(iax+
if3y+
iyz)dad/3
-27rifccos^/(a0,/?0)eXp('fcfi), R where ao = k sin 9 cos <j>, /?o = k sin 0 sin and 7 = & cos 9. ~
(4.1.24)
As an example, the far field pressure Pij(R, 9, ) of the monopole in a free field is obtained from the first of Eq. (4.1.8) by setting \A / ( a , /?) - - — e x p ( - i a z 0 - i/ffyo - 17*0).
(4.1.25)
Acoustics of Underwater Structures
88
Substitute this value into Eq. (4.1.24), to give precisely the far field pressure given by Eq. (4.1.16). T h e aforementioned analysis of the scattered pressure of the monopole point source located near hard and soft planar surfaces does not necessarily reflect the behaviour of arbitrary orientated force dipoles and turbulence quadrupoles similarly located.
T h e reflection properties of these higher order sources are
obtained by using the methods of Section 3.6 to describe the source pressure pi, and the m e t h o d s described above to find the scattered pressure ps.
4.2
Spherical Surface For the specific case of a plane wave incident along the z axis in the direc
tion of increasing
z, as shown in Figure 4.2, the incident pressure is given by
Eq. (3.2.6) as oo
p t (i?,0) = A ^ i n ( 2 n + l ) j n ( * f l ) P n ( c o s 0 ) ,
(4.2.1)
n=0
the sound field being independent of the circumferential angle <j>.
T h e wave
scattered from the surface of the sphere has the form oo Pt(R,
0) = J2 AnK(kR)Pn(cos
9),
(4.2.2)
which is appropriate for an outgoing wave which spreads spherically at large values of R. T h e total pressure anywhere in the fluid is p(R, 0) = Pi{R, 0) + ps(R, 0).
(4.2.3)
W h e n the boundary at R = a is hard, the acoustic particle displacement, normal to the surface,
*■<*•>=£^
<«■«>
is required to vanish on the surface itself. It is trivial to show t h a t this requires the scattered pressure to be oo
p.{R,
6) = -AY,
i"(2n + m'n(ka)/h'n(ka)}hn(kR)Pn(coS0). n=0
(4.2.5)
Hard and Soft Structures
89
Figure 4.2: Sound scattering by hard/soft spherical surface excited by a plane wave or monopole. On the surface itself the total pressure is obtained, with the help of one of the Wronskian relations in Eq. (1.7.7), as ,
A ^in+1(2n+ n
m
,
^
(4.2.6)
In the acoustic far field, the spherical Hankel function, hn(kR), is replaced by its value for a large argument, viz. (_i)n+i exp(ifctf) K(kR)
kR
(4.2.7)
giving p8f(RJ6)
. exp(ikR) £ ( 2 n + l){]fn(ka)/Wn(ka)}Pn(cos 0), = iA kR
(4.2.8)
n=0
which is a spherically spreading wave. The back-scattered pressure is obtained by setting 0 = 180°, for which Pn(cos#) = (—l)n. It is instructive to expand this equation for a small value of ka. The first two terms are required giving Psf(R,0)~
2 3 exp(ikR)Ak a/ PV ;
, 3 (-l+-cosg),
(4.2.9)
Acoustics of Underwater Structures
90
which pressure drops rapidly as frequency is reduced. When the boundary at R = a is soft, the total acoustic pressure on the surface is required to vanish. This requires the scattered pressure to be oo
p,(R,9)
= - A ^ i n ( 2 n + l){j n (fea)/h n (fca)}h„(fci?)P n (cos^).
(4.2.10)
n=0
In the acoustic far field, the spherical Hankel function, hn(kR), its value for a large argument, giving psf(R,
0) = iAeXp^R)
is replaced by
JT(2n + l){jn(ka)/hn(ka)}Pn(cos0),
(4.2.11)
n=0
which is a spherically spreading wave. The back-scattered pressure is obtained by setting 0 = 180°, for which P n (cos0) = (—l) n . It is instructive to expand this equation for a small value of ka. Only the first term is required giving Psf(R,0)c-aA
e
-^&,
(4.2.12)
which means that the pressure amplitude is large and independent of both fre quency and angle 0, for small values of ka. When the excitation is a monopole at (RQ, 0,0), whose free field pressure is given by Eq. (4.1.7) in which | R - R 0 | = y/(R2 + R20 - 2RR0 cos 0), the Legendre series expansion is obtained from Eq. (3.5.10) as
M*,»)=^|> + i)r„ ( c^){ $ ; * < $ : £ * . = £
(4*i.)
The total pressure anywhere in the fluid is given by Eq. (4.2.3), where ps(R)0) has the form of Eq. (4.2.2). When the boundary at R = a is hard, the acoustic particle displacement, normal to the surface, as given by Eq. (4.2.4), is required to vanish. Thus, omitting details oo
Ps(R,0) = -ikAYl^n+l){i'n(k^n(kR0)/K(ka)}hn(kR)Pn(coSe).
(4.2.14)
n=0
On the surface itself the total pressure is obtained, with the help of one of the Wronskian relations in Eq. (1.7.7), as /
^
~A v ^ (2n + l)K(kRo) n=0
,
Hard and Soft Structures
91
The far field scattered pressure psj(R)9) is obtained by replacing the spherical Hankel function, hn(kR), by its large argument approximation. Thus, P.j(R,0)
= ~AeX^lkV
£ ( _ i ) » ( 2 „ + l){j;(fca)h n (fci? 0 )/h;(fca)}P„(cos6), n=0
(4.2.16) which is a spherically spreading wave. The back-scattered pressure is obtained by setting 6 = 0°, for which P n (cos0) = 1. Rather than by using the first of Eq. (4.2.13) to evaluate the far field incident pressure pif(R,$), it is simpler to use Eq. (4.1.16), and the relation £o sin 0 cos <> / + t/osin0sin(/> = 0 on the z axis, to give Pif(R, 0, ) = Aexv(l*R) exp(-ikR0 cos 6). (4.2.17) R The total pressure in the far field is Pf(R, 0) = Pij(R, 6) -f p 5 /(i2, 9). The first two terms of the far field pressure scattered by the hard sphere, for a small value of fca, are / ^ /IN Psf(R,0)~
-exp(ik(R+R0)) Ak2a3 ,„ n „ 3i ^ ^ - ^ 5 2 Z - ^ - ( 2 + 3costf+—cosff).
/ift1„ (4.2.18)
The presence of the term k2a3 ensures that the scattered pressure is small com pared with the pressure of the monopole. When the boundary at R = a is soft, the total pressure on the surface is required to vanish. Omitting details, this gives CO
p,(R,0)
= -ikAY/(2n
+ l){in(ka)hn(kRo)/K(ka)}K(kR)Pn(cosO).
(4.2.19)
n=0
The far field scattered pressure psf(R,6) is obtained by replacing the spherical Hankel function hn(kR) by its large argument approximation. Thus, psj(RJ)
= ~A&v(lkR)
£(_i)"(2n +
l)iUka)K(kR0)/hn(ka)}?n(cose),
n=0
(4.2.20) which is a spherically spreading wave. The far field incident pressure, Pij(R, 0), is given by Eq. (4.2.17). The first term of the far field pressure scattered by the soft sphere, for a small value of ka, is PsARd)^_aAej^k(R±Ro)1 JLQ
^ it
^
Acoustics of Underwater Structures
92
T h u s , for small values of fca, the pressure scattered by the soft sphere is of the same m a g n i t u d e as the pressure of the monopole when this source is located close to the sphere. However, the scattered pressure is 180° out of phase with the monopole, so the total pressure is very small because of cancellation. T h e aforementioned analysis of the scattered pressure of the monopole lo cated near hard and soft spheres does not necessarily reflect the behaviour of force dipoles and turbulence quadrupoles similarly located.
For example,
Ffowcs Williams, in reference [1], has shown t h a t there can be considerable pressure enhancement when a longitudinal quadrupole source is located near to a hard sphere. For investigations of arbitrarily orientated dipole and quadrupole sources near to spheres, the above analysis is not sufficiently general, and it is necessary to solve the wave equation with the circumferential angle <j) included. T h e Green's function for an arbitrarily located monopole, which can be used as a building block, is given in Section 3.5.
4.3
Cylindrical Surface For the case of a plane wave incident at angles 6{ and fa, as shown in
Figure 4.3, the incident pressure is given by Eq. (3.2.3) as oo
Pi(r,,z) = Aexp(—ikzcosOi)
^
(-i)' n 'j| n |(fcrsin0 2 )exp(in(<£ -
fa)).
n = — oo
(4.3.1) T h e pressure scattered by the surface of the infinite cylinder is required to have the form oo
Ps{r, ,z) = exp(-ikz
cos 6i)
]P
AnH|n|(^rsin^)exp(in(^ -
fa)),
(4.3.2)
n = —oo
which is appropriate for an outgoing wave which spreads cylindrically at large values of r. T h e total pressure anywhere in the fluid is p ( r , <j>, z) - pi(r, <j>, z) + ps{r, >, z).
(4.3.3)
W h e n the boundary at r — a is hard, the acoustic particle displacement, normal to the surface,
Wr{rA,z)
=
A_WMA, puj2
or
(4 .3. 4) v
'
Hard and Soft Structures
93
Figure 4.3: Sound scattering by hard/soft cylindrical surface with plane wave and monopole excitations. is required to vanish on the surface itself. It is trivial to show that this requires the scattered pressure to be ps(r,
— — Aexp(—\kzcos#t) x °o j / (kasinO) ^ (-O1"1^1^ ^g>|B|(fcr8ing,-)«p(in(^-^))-(4-3.5) n= -oo
|n|V
W
On the surface itself the total pressure is obtained, with the help of one of the Wronskian relations in Eq. (1.6.6), as p(a.d).z)
=
——:—— A exp(—ikz cos 0{) x wka sin 6{ E
w \u
' ^exp(m(^-^)).
(4.3.6)
In the acoustic far field, the Hankel function is replaced by its value for a large argument, viz. Hn(ifersin0t-) ~ (-i) n y/2/irkrsin 0{ exp{i(fcrsin Q{ -
TT/4)},
(4.3.7)
Acoustics of Underwater Structures
94
giving the scattered pressure as Psf(r,<j>,z) =
—A\/2/wkr sin Q{ exp(i&r sin 0,-) exp(—in/4) x
exp(-i*zcos0,.) 5 ^ ( - l ) W j ; " ' . ^ ^ e x p t i ^ - ^ ) ) . lnP
n = -oo
(4.3.8)
*'
When the boundary at r = a is soft, the total acoustic pressure on the surface is required to vanish. This requires the scattered pressure to be ps(r,<j)yz)
=
—Aexp(—ikzcos9i)x
£ H)'"' n^Tl^W^sin *•') e x p ( i n ^ ~ *0)- (4-3.9) n = —oo
II^
In the acoustic far field, the Hankel function is replaced by its value for a large argument, giving the scattered pressure as psf(r,<j),z)
=
— Ay/2/wkr sin 0{ exp(iArrsin^)exp(—i7r/4) x
exp(-i*zcoB0 f -) J2 nfr^
(-l)
H
M^exp(m(^^)).(4.3.10) H|n|(Arasin0i)
For a monopole excitation located at (ro,<£o,£o), the incident pressure is given by Eq. (4.1.7) in which | R - R 0 | = \ / ( r 2 + r o - 2 r r o cos(<£ - <£0) + (z-z0)2). Its Fourier series expansion is given by Eq. (3.4.6) as CO
p,-(r,^,z)
=
(L4/2) ^2
exp{in(<£ - <£0)} x
n = —co + CO p+oo
/
J | n | ( 7 r 0 ) H | n | ( 7 r ) e x p { i a ( 2 : - z0)}da, for r > r 0 , /■&> (4.3.11) / J | n | ( 7 r ) H | n ( ( 7 r 0 ) e x p { i a ( z - z 0 )} r,
«/—CO
where 7 = -h\/(^ 2 — a 2 ) . The total pressure anywhere in the fluid is given by Eq. (4.3.3), in which the scattered pressure has the form ~
r+co
Ps(r,,z)= 2 J exp{m(<^ - (^0)} / n —_ ^
«/ — CO
An(a)E{n{(yr)exp(iaz)da,
(4.3.12)
Hard and Soft Structures
95
which is appropriate for an outgoing cylindrical wave. When the boundary at r = a is hard, the total acoustic particle displace ment, normal to the surface, as given by Eq. (4.3.4), is required to vanish. Thus, omitting details oo
P*(r,<M)
=
(-iA/2)
]T
exp{in( - fa)} x
n = — oo
f+°° JLi(7a)H|„|(7r 0 ) H J „ W (ya) H(7r)exp{ia(^.0)}da.
(4.3.13)
On the surface itself the total pressure is obtained, with the help of one of the Wronskian relations in Eq. (1.6.6), as p(a,<j),z)=—
V
exp{in(<j) - <j)0)} /
f"j
°
exp{ia(z -
z0)}da. (4.3.14)
When the boundary at r — a is soft, the total acoustic pressure on the surface, r = a, as given by Eq. (4.3.3), is required to vanish. This requires the scattered pressure to be oo
ps(r,
=
(-iA/2)
]P
exp{in(<^ - 0O)} x
n = —oo +
f °° J|n|(7Q)H|n|(7^o) TJ , . , r u , / ' / \ H| n |( 7 r) exp{ia(* - z0)}da.
(A*^\ (4.3.15)
For monopole excitation, the far field scattered pressure psj(R, 0, (j)) for both hard and soft boundaries is obtained by the method of stationary phase. First consider the integral +oo
/
F„(a)H|„|( T r) exp(ia*)da,
(4.3.16)
-OO
in which the Hankel function is replaced by its value for a large argument, viz. H| n |(7r) ~
/ v
2 / 7 r 7 r e x P { i ( 7 r - l ^ k / 2 - ir/4)},
(4.3.17)
Acoustics of Underwater Structures
96
and a change of variable is made from cylindrical to polar coordinates by using the substitutions z — Rcos9, r = it! sin 0. Thus, I
=
exp{-i(|n|7r/2+7r/4)} x +oo
/
Fn(a)y/2/iryRsin
6 exp(ia#cos 0 + ijRsin 0)da, (4.3.18)
-oo
and recall that 7 = \/{k2 — a 2 ). This is of the form required by the stationary phase method of Section 1.9, viz. +00
/
/(a)exp(iAff(a))da,
(4.3.19)
-OO
provided / ( a ) = exp{-i(|n|7r/2+7r/4)}F n (a) v /2/7T7^sin6>, 0(a) = acos0 + 7sin0,
A = R.
(4.3.20)
The stationary phase point ao is found from the vanishing of the derivative -^- = cos0-a
sin 6>/7,
(4.3.21)
which occurs at the value ao = kcos0, for which g(ao) = k and 7 = ksinO. Also required is the second derivative, ■ r ^ = - sin 0/7 - a2 sin 0 / 7 3 ,
(4.3.22)
which, when evaluated at the stationary phase point, becomes g"(a0) = -l/k8m20.
(4.3.23)
All the ingredients are now present for evaluating the integral for a large value of i£, by using the formula in Eq. (1.9.6) directly. Thus, +00
/ *
F n (a)H| n |(7r) exp(iaz)da -00
-2l(-i)NF„(a0)^^),
where ao = k cos 6 and 7 = k sin 0.
(4.3.24)
Hard and Soft Structures
97
Eq. (4.3.24) can be directly applied to the scattered pressure, due to monopole excitation, giving, for the case of the hard body whose scattered pressure is given by Eq. (4.3.13), / o a JL\ psf(R,6,
—A
Aexp(ikR)
~—-exp(-ifczocos0) x
-Mn| J in|( fcasin m\n\(kr 0 sing) ( ~1} H{ ,(ifcasinfl) «PM^-*o)}. ,
(4325)
and for the case of the soft body, whose scattered pressure is given by Eq. (4.3.15), / T-* /. i\ p5/(/t,0,0)
>. exp(iAriJ) ^^ —A exp(—lfczocost/) x it V> / .^|w|J|w|(feflsing)HH(tr0sing) 2 ^ (_1) TT / , . ax e x p { m ( ^ - ^ 0 ) } . (4.3.26) ~
Also required in the far field is the incident pressure due to the monopole. Rather t h a n evaluating Eq. (4.3.11) by t h e method of stationary phase, it is simpler t o use Eq. (4.1.16) directly, and the geometric relation xo sin 9 cos +yo sin 9 sin > = ro sin 9 cos(cf) — >o) between monopole positions in cartesian and cylindrical co ordinates, t o give Pif(R,
0, ) = A*^-^—*
exp{-ifc(r 0 sin 9 cos(<£ - <£0) + *o cos 0)}.
(4.3.27)
T h e total pressure in t h e far field is Pf(R,0,)=Pif(RA)
+ Psf(RA).
(4.3.28)
T h e aforementioned analysis of the scattered pressure of the monopole, lo cated near hard a n d soft cylinders, does not necessarily reflect t h e behaviour of arbitrarily orientated force dipoles and turbulence quadrupoles similarly lo cated. T h e reflection properties of these higher order sources are obtained by using t h e m e t h o d s of Section 3.6 t o describe t h e pressure pi of the source, and those described above t o find t h e scattered pressure ps. 4.4
Axisymmetric Slender Body An approximation t o time-harmonic scattering by a slender body of revolu
tion can be obtained by modifying cylindrical baffle theory to allow for a tapering
Acoustics of Underwater Structures
98
Figure 4.4: Geometry of hard or soft slender axisymmetric body excited by a plane wave at arbitrary incidence. The • symbols denote the position of the specular points. of the body, see, for example, the textbook of Junger & Feit [2]. Although the approximation obtained is satisfactory for scattering predictions at broadside incidence, it becomes increasingly unreliable as endfire is approached. This de ficiency can be overcome by using formulae based on an approximate relation between surface pressure and displacement.The geometry of the axisymmetric body is shown in Figure 4.4. In a cylindrical coordinate system, {r,,z) are coordinates exterior to the body and (ro,^o,^o) are coordinates on the body. The plan of action starts by considering a radiation problem for which the far field pressure is required when either the normal displacement or pressure is prescribed on the surface So, there being no external source distributions. Surface displacement and pressure are expanded as Fourier cosine series, viz. WN(r0, 0o, z0) = ^2
W
n(ro, z0) cos(n
(4.4.1)
n=0
and p(r0,(j)o,zo) = ]T^Pn(ro,2o)cos(n>o), n=0
(4.4.2)
Hard and Soft Structures
99
which are valid because field variables are assumed symmetric in the circumfer ential angle . The key feature in the analysis is an assumed local approximation to the pressure near to the surface, viz. CO
p(r, 0, z) = exp(-ik(z
- z0) sin/?) ^
CnEn(kr cos /?) cos(n^),
(4.4.3)
n=0
where 0(ZQ) is the angle between the tangent to the surface and the axis of the body; it ranges from 90° on the left hand side of the body to -90° on the right hand side of the body, and it is defined by tan/? = da(z 0 )/dz 0 , where ro = a(z0) is the radius of the body. The local acoustic particle displacement, in the direction normal to the boundary, is obtained from the boundary condition dp(r,,z)/dN = coafl^ -sm/3^ = pu>2WN(r,>,z), dr dz
(4.4.4)
as Wjv(r,>,z)
=
(pcu)
1
exp(—ifc(z — z 0 )sin/?) x
CO
^2 ( c o s 2 PK(kr
cos /?) + i sin2 /?H„(kr cos /?)) Cn cos(n). (4.4.5)
n=0
By evaluating this expression on the surface So, and comparing it with Eq. (4.4.1), the coefficients Cn are found in terms of the coefficients Wn(ro,zo). Eq. (4.4.3) evaluated on the boundary is then / A \ V^ Wn(r0)zo)Rn(krocos(3)cos(no) p(r0, 0o, *o) = PC" 2L, a\ ■ - - 2 m tu aV (4A6) 2 tmi (u 5 ^Q cos^ pWn (kro cos p) + I sin pnn (kr0 cos /?) From the definitions in Eq. (4.4.1) and Eq. (4.4.2), the normal surface displace ment is obtained as Wj\r(r 0 ,^o,zo)
=
^Mro>*o)x n=0
cos2 /3K'n (kr0 cos f3) + i sin2 /?Hn (fcr0 cos /?) IT ^ m~^ -cos(n0 o ). (4.4.7) pcu;En(kro cosp) The approximation inherent in Eq. (4.4.6) is evidently reasonable at high fre quencies because it leads to the plane wave relation p(ro, >o, zQ) ~ -iLupcWN(r0i >0i z0),
(4.4.8)
Acoustics of Underwater Structures
100
when the Hankel functions are replaced by their values for large arguments. The reasonableness of the approximation at low frequencies relies on the length scale for a significant change in WN^O, <£o, zo) being greater than that for significant changes in tan /?. This is likely to be true for calculations of acoustic scattering where the length scale for significant changes in W^(r 0 , <^o> ^o) is of the order of an acoustic wavelength. The approximation is thus expected to be valid at both low and high frequencies, but there may be an intermediate frequency regime in which it is unsatisfactory. The procedure continues with the Helmholtz integral equation, exterior to the surface So, viz.
p(R) = 1-J
(p(Ko)dGfN*o)
~f*>2WN(Ro)G{R,Ro)) dS0,
(4.4.9)
which equation is obtained from Section 3.8 and the momentum condition of Eq. (4.4.4). The Green's function is obtained from Eq. (3.4.6), for r > ro, as CO
G(R, Ro)
=
(i/2) Y^ en cos{n( - <j>0)} x n=0 +oo
/
J n (7r 0 )H n (7r) exp{ia(z - z0)}da,
(4.4.10)
where 7 = -f \/(k2 — a2). The normal derivative of the Green's function is 9G
fN*0)
=
(i/2)f>ncos{n(«^0)}x n=0 /
/
H n (7r)(7cos/?J n (7r 0 ) + iasin/?J n (7r 0 ))exp{ia(2-2:o)}da. (4.4.11)
J—c
Substitute Eq. (4.4.10) and Eq. (4.4.11) into the Helmholtz integral equation. Then replace the surface pressure by Eq. (4.4.6) and the surface displacement by Eq. (4.4.1), both with a change of summation index from n to m. The area element is dS 0 = (l + (da/d2r 0 ) 2 ) 1/2 a(2r 0 )dzod^o = (a(z0)/ cos(3) dz 0 d^ 0 .
(4.4.12)
In the resulting equation, integrations over a, ZQ and <j>o as well as a double summation over m and n are involved. A simplification is achieved by noting
Hard and Soft Structures
101
t h a t each term of the double summation is of the form f-\-L
+oo
p2w
/ / / -oo J—L Jo
/(z 0 ,a)cos(m<^ 0 )cos(n() — <^o))d^od^ 0 da, (4.4.13)
and the orthogonality property of the cosine functions ensures that / ( m , n) van ishes except when m — n, in which case the <j>o integration of the cosine terms is 2 7 r c o s ( n 0 ) / e n . T h e pressure exterior to the body is then obtained as oo
/»+oo
p(r, >, z) = (icopc/4) ^^ cos(n^) / „— n
Xn(a)B.n(jr)
exp(iaz)da,
(4.4.14)
J — oo
where x
(a) nl
=
^
r+L f Lkj 7_L V
(ya)
"
| H w ( t a cos/?) (7 cos/?JUTa) + i « s i n / 3 J w ( 7 a ) ) \ cos 2 /?H^(ibacos/?)-hisin 2 /?H n (ibacos/?) /
(VF n (a,2:o)a(zo)/cos/?)exp(-ia2ro)d2:o.
(4.4.15)
By using a similar procedure t o eliminate the displacement from the Helmholtz integral equation, the pressure in the exterior fluid is again given by Eq. (4.4.14), b u t with / ( - ifcsin 2 /?J n (7a) + i a s i n / ? J n ( 7 a ) + 7 c o s ^ J ^ ( 7 a ) UP J-L \ k cos 2 /3Jn (ya)K'n (ka cos 0)' (pn(a, z0)a(zo)/ cosP) exp(-iaz0)dz0. (4.4.16) Un(ka cos /?)
Xn(a)
=
C
Eq. (4.4.14) is expected to be usable for r > a m a x , where a m a x is the maxi m u m radius of t h e body. Transforming from cylindrical (r, , z) to polar (R, 0, ) coordinates, by using relations given in Table 1.2, allows a stationary phase eval uation of t h e far field radiated pressure, as described in Section 4.3. Thus, pf(R,
9, >) = u;pceXP^R)
J£(-i)nXn(k
cos 9) cos(n^),
(4.4.17)
n=0
where a = kcosO is the stationary phase wavenumber, for which 7 = fcsintf. Although this equation is strictly not valid for 0 = 0° or 0 = 180°, it can be used in the limit as 0 approaches these values. T h e above equation shows t h a t the far field radiated pressure can be calculated when the function Xn(k cos 0) is known. For prescribed surface motion, according to Eq. (4.4.1), this function is
Acoustics of Underwater Structures
102
given by Eq. (4.4.15); for prescribed surface pressure, according to Eq. (4.4.2), this function is given by Eq. (4.4.16). T h e scattering problem of an incident plane wave arriving from the angles 9i and <j>i = 180°, as illustrated in Figure 4.3, is now considered. The incident pressure is obtained from Section 4.3 as oo
^2 eninJn(kr
Pf(^)^ ? z) — Aexp(—ikzcosOi)
sin 6{) cos n
(4.4.18)
n=0
For both hard and soft scatterers, the total pressure pt is the sum of the incident plane wave pressure, pt-, and the pressure scattered by the hard/soft body, ps, viz. Pt(r, , z) = pi(r, >, z) -h p , ( r , >, z). First the case of the hard scatterer is considered.
(4.4.19)
T h e acoustic particle
displacement normal to the surface arising from the pressure pt(r, <j>, z) is (4-4-20)
WNt(r,<j>,z) = WNi(r,<j>,z) + WNs(r,<j>,z),
which is the s u m of the component displacements of the incident and scattered pressures.
On the surface itself the displacement VF/vt(ro, 0o, ZQ) must vanish
because the surface is hard, so WNs(r0)<j)o,zo)
= -WNi(ro,o,z0).
(4.4.21)
T h e pressure and normal particle displacement of the incident wave are related by the m o m e n t u m condition
^Wmir^z)
d
^A,
=
(4.4.22)
which equation, together with Eq. (4.4.18), can be used to obtain the virtual particle displacement on the surface due to the scattered pressure. Thus, WOv*(ro,0o,^o)
=
—A
exp(-ikz0
cos 9i) x
pCU) oo
^ n=0
e n i n (sin 0,- cos P3fn(kasin0.)
+ i cos 6{ sin /33n(kasin
0,-)) cos n<j). (4.4.23)
Hard and Soft Structures
103
The spherically spreading pressure scattered to the far field, pjs(R, 0, >), say, is obtained from Eq. (4.4.17) as p„(R, 6,) = upceXP^R)
53(-i)»X„(Jb cos6) cos(n^),
(4.4.24)
n=0
where Xn(a)
is obtained from Eq. (4.4.15) in which —A
Wn(a,zo)
—
exp(—i&zocosfl;) x pew enin (sin0,- cos/?J^(fcasin#,) -|- icos^- sin/?J n (fcasin0,)). (4.4.25) The case of the soft scatterer is now considered. The boundary condition, requiring that the total pressure given by Eq. (4.4.19) vanishes on the surface, gives oo
Ps(ai<J>Q,zo) = —A exp(—ifczp cos 0j) y] enin J n (ka sin 0j) cos n<j>Q. (4.4.26) n=0
The spherically spreading pressure Pfs(R,0,) scattered from the soft body to the far field is obtained from Eq. (4.4.24), where Xn(a) is obtained from Eq. (4.4.16) in which Pn(a,zo) = - A exp(-ikz0
cos 0i)enin 3n(ka sin 0i).
(4.4.27)
In order to demonstrate an application of the formulae for far field sound scattering, the underwater target strength of a prolate spheroid of length 2L = 10 m and maximum width 2a m a x = 2 m is calculated. The target strength is defined as 20 x log 10 \pf8(l,0,>)/A\. For monostatic target strength, both source and receiver are at the same position; for bistatic target strength, source and receiver are at different positions. For the monostatic case here, fa = > — 180°, and 0 = 0i with 0 = 0° for endfire incidence and measurement and 0 = 90° for broadside incidence and measurement. In Figure 4.5 is shown a comparison of endfire monostatic target strength predictions of the hard spheroid, one obtained using the "exact" Helmholtz integral equation, described in Section 14.3, and the other using the methods described here. There is excellent agreement at the lower frequencies, but differences become more apparent as the frequency moves into the middle frequency regime.
Acoustics of Underwater Structures
104
Figure 4.5: Monostatic target strength of hard 5:1 prolate spheroid at endfire; Helmholtz integral equation, and x x x x numerical evaluation of Eq. (4.4.24).
Monostatic target strengths, computed by using the formulae derived here, at broadside, 30° off broadside and endfire are shown in Figure 4.6 for the case of a hard spheroid and Figure 4.7 for the case of a soft spheroid. T h e main difference between the target strengths of the hard and soft bodies occur at ex tremely low frequencies; here the target strengths of the rigid body drop rapidly as the frequency is reduced while the target strengths of the soft body remain high.
This behaviour is to be expected, because it has been demonstrated,
analytically, for the hard and soft spheres considered in Section 4.2. At high fre quencies, numerical results demonstrate t h a t the correct asymptotes are being approached at both endfire and broadside. Simple formulae for these high fre quency asymptotes, which are equally applicable for' both hard and soft prolate spheroids of semi-minor axis b and semi-major axis a, have been tabulated by Urick [3]: thus, at endfire TS = 20 x log 1 0 (6 2 /2a), giving a target strength of - 2 0 dB; at broadside TS - 20 x l o g 1 0 ( a / 2 ) , giving a target strength of 8 dB. Numerical results have thus demonstrated t h a t the approximation of Eq. (4.4.3) can lead to acceptable target strength predictions over a wide frequency range. In order to shed some light on the oscillations in the target strength spectra,
Hard and Soft Structures
105
Figure 4.6: Monostatic target strength of 5:1 hard prolate spheroid at broadside, 30° off broadside, and endfire.
Figure 4.7: Monostatic target strength of 5:1 soft prolate spheroid at broadside, 30° off broadside, and endfire.
Acoustics of Underwater Structures
106
a transient response for endfire incidence is shown in Figure 4.8 for the case of a hard spheroid and in Figure 4.9 for the case of a soft spheroid. T h e excitation is a unit 500 Hz plane wave on for 1 cycle. T i m e is converted to distance by noting t h a t in 1 ms, sound travels 1.5 m, but also note t h a t the origin of the t i m e scale is arbitrary. Transient reflections are defined to have positive polarity if they follow the same shape as the excitation, viz., a positive pressure followed by negative pressure; and negative polarity if they are of opposite sign to the excitation.
For the case of a hard spheroid, a reflection of positive polarity
from the near end of the body is followed by a smaller reflection of the same polarity from the far end. For the case of a soft spheroid, a reflection of negative polarity from the near end of the body is followed by a reflection of positive polarity from the far end. Other plots, not shown, reveal t h a t at extremely low frequencies the reflection from the far end is much the same level as the reflection from the near end, while at high frequencies the reflection from the far end is insignificant. These plots demonstrate t h a t the loops in the target strength plots of the hard body stem from apparent sources of the same polarity at each end of the body. For the soft body the loops in the target strength spectra appear to stem from sources of opposite polarity. Specular points are defined as points on the body at which the tangent planes are perpendicular to the direction of the incident wave. T h u s , there are two specular points on the prolate spheroid, one in the illuminated zone and one in the shadow zone. The plots, and others not shown, are consistent with the presence of two sources; a primary source at the specular point in the illuminated zone and a secondary source, which is less localized, near to the specular point in the shadow zone. Freedman [4] has considered echo mechanisms of sound scattering from structures with curvature discontinuities.
4.5
M o n o p o l e in Axisymmetric Channel T h e free space Green's functions of the monopole can also be used as a
starting point for obtaining analytical expressions for Green's functions when there is a boundary present. As an example, the problem analyzed by Skelton [5] is considered. First, the Green's function of the reduced wave equation between parallel planes is obtained.
This Green's function is then used to solve the
problem of a point source in an axisymmetric channel which has hard walls and
Hard and Soft Structures
107
Figure 4.8: Scattered far field pressure, in millipascals reference 1 m, of a 5:1 hard prolate spheroid at endfire. The excitation is a unit plane wave whose time variation is a single cycle of a 500 Hz sine wave. The origin of the time scale is arbitrary.
Figure 4.9: Scattered far field pressure, in millipascals reference 1 m, of a 5:1 soft prolate spheroid at endfire. The excitation is a unit plane wave whose time variation is a single cycle of a 500 Hz sine wave. The origin of the time scale is arbitrary.
Acoustics of Underwater Structures
108
a soft surface. T h e starting point of the analysis is the free space Green's function of the monopole, given by Eq. (3.4.6), re-arranged to reflect a source position of (^o, 0,2:0) in cylindrical coordinates. Thus, ^/-^ ^ x G(R,R0)
exp(i&|R — Rol) /•/n\ \~^ 1 J T, , =(i/2)2>ncosn
= /
J n ( 7 r o ) H n ( T r ) e *P (ia(z - z0)) d a , for r > r 0 ,
J
< J%o /
(4-5.1) Jn(jr)En(jro)
exp (ia(z - zo))da,
for r 0 > r,
where 7 = H-\/(fc 2 — a 2 ) , with Im.(7) > 0 in order to satisfy the radiation condition. An alternative form of this equation is obtained by using the formula
H„(V(^-^W)> = £.. c„s„*{
J;^£|W; S 'Si:
n=0
(4.5.2) which is obtained from Graf's addition theorem, Eq. (1.6.7). By substituting this equation into Eq. (4.5.1) the required alternative form, G ( R , R 0 ) = (i/2) /
H 0 ( 7 \ / ( r ' 2 + r 2 - 2 r r o c o s ^ ) ) exp (ia(z - z0)) d a , (4.5.3)
of the Green's function is obtained. W h e n the monopole is located between an upper soft boundary, at z = h, and a lower hard boundary, at z = 0, the method of images can be used to construct a new Green's function which satisfies the boundary conditions. The scattered pressure due to the presence of a single planar boundary is equivalent to the pressure of an image source which is located at an equal distance on the opposite side of the boundary to the actual source; the image source is in phase if the boundary is hard, and it is out of phase if the boundary is soft. Thus, when the monopole is located between soft and hard boundaries, repeated reflection, with a phase change of 7r when reflecting in the upper boundary, is used to construct the total sound field. T h e vertical locations of the actual and image
Hard and Soft Structures
109
Figure 4.10: Acoustic monopole, at ( r o , 0 , z o ) , located between hard or soft planar boundaries. T h e total pressure, at (r, >,z), is obtained by summing image sources.
sources, as shown in Figure 4.10, are obtained as four groups of coordinates, f 2(ra + 2(m + —2mh [ —2mh
l)h + 2 0 , with a phase change of (m + l)7r. l)h — z0) with a phase change of (m -f l)7r. + ZQ, with a phase change of mir. — ZQ, with a phase change of rmr.
(4.5.4)
T h e new Green's function is obtained by replacing the term exp(—ic*z 0 ), in the formulae for the free space Green's functions, by the infinite sum OO
I(a, z0) -
^
/
(-l)
m
m=0
exp{-ia(zQ
( e x p { - i a ( z 0 - 2mh)} + e x p { - i a ( - z 0 -
+ 2(m + l)h)} - e x p { - i a ( - z 0 + 2(m + l)h)} J ,
which can be re-written as CO
I(a,zQ)
2mh)}-
^
= 2cos(azQ)
^
( - l ) m exp(2iara/i)
(4.5.5)
Acoustics of Underwater Structures
110
= 2cos(az0)(2 ^
exp(4iamfc) -
\
ra=-oo
^jT exp(2iam/i) j . (4.5.6) m=-oo
/
The generalized function identity OO
V"
H
6(a-md)=-
oo
^
m = — OO
exp (2 7ri ma/d),
(4.5.7)
m = —oo
with c? = 7r/2/i and d = ir/h in turn, is used to re-write Eq. (4.5.6) as
(
oo
]T
6(a-m7r/2h)-
m= — oo oo
=
(27r//i)cos(az 0 ) 5 Z
oo
\
]T
6(a-rrur/h)\
m = —oo
^(a-{2m+lW2/i).
/
(4.5.8)
m = —oo
When the exp(—iaz0) terms in Eq. (4.5.1) are replaced by this expression for / ( a , ^ ) , the a integration becomes trivial, giving, after re-arranging the sum over all m by a sum from m — 0 to oo, the new Green's function Pi(r,
-
(2iir/h) ^
en cos ncf) x
n=0 oo
^
3n(7mro)En(ymr)cos(oimzo)cos(oimz)i
for r > r 0 ,
0
"£ (4.5.9) ^ Jn(7mr)H n (7 m r 0 )cos(a m z 0 )cos(a m z), for r 0 > r, v
m=0
which satisfies the boundary conditions of upper soft and lower hard. Here, 7 m = -\-y/(k2 — a m ) and am = (2m -f l)n/2h. The alternative form of this equation is obtained, similarly, from Eq. (4.5.3) as jpt-(r, c£, *) = (2iV/A) ] T H0(7m v/(r 2 + TQ — 2rro cos (/>)) cos(a m zo) cos(am2:). (4.5.10) When ro = 0, this expression reduces to that of the canonical sound propagation problem of a point monopole, on the z axis, located between soft (the surface) and hard (the seabed) planar surfaces. For far field computations, the Hankel function can be replaced by its asymptotic form.
Hard and Soft Structures
111
Skelton [5] also considers other combinations of boundary conditions. For the case in which b o t h boundaries are hard the Green's function is Pi{r,(j),z)
=
(J7r//i) y ^ en cos n> x n=0
oo
^
e m J n ( 7 m r 0 ) H n ( 7 m r ) c o s ( a m z 0 ) c o s ( a m z ) , for r > r 0 ,
"S°
(4.5.11)
y ^ e m J n ( 7 m r ) H n ( 7 m r 0 ) c o s ( a m 2 r 0 ) c o s ( a m z ) , for r 0 > r, m=0
where 7 m = +y/(k2
— c*^), and a m = mw/h.
The alternative form of this
equation is Pi{r,(j),z)
e m H 0 ( 7 m y{r2
= (iir/h) ^
+ r§ - 2 r r 0 cos^}) c o s ( a m z 0 ) c o s ( a m z ) .
m=0
(4.5.12) For the case in which b o t h boundaries are soft the Green's function is OO
p»(r, 0, z)
=
(2i7r//i) Y ^ e n cos n<^> x n=0 00
^
J n ( 7 m ^ o ) H n ( 7 m r ) s i n ( a m 2 : o ) s i n ( a m 2 r ) , for r > r 0 , 0
"S (4.5.13) y ^ J n ( 7 m ^ ) H n ( 7 m r 0 ) s i n ( a m z o ) s i n ( a m 2 : ) , for r 0 > r, m=0
where 7 m = +y/(k2
— a 2 ^) and am
= mir/h.
The alternative form of this
equation is p , - ( r , ^ , z ) = (2i7r//i) ^
H 0 ( 7 m y {r 2 + rg - 2 r r 0 c o s < £ } ) s i n ( a m z o ) s i n ( a m z ) .
m=0
(4.5.14) T h e Green's function, p«(r, 0, z), is used to solve the problem of a monopole in an axisymmetric channel, with a soft surface and hard boundaries, as shown in Figure 4.11. T h e total pressure is of the form P(r, >, z) = pi(r, , z) + p , ( r , <£, z),
(4.5.15)
Acoustics of Underwater Structures
112
Figure 4.11: Acoustic monopole, at (ro,0,zo), in axisymmetric channel with hard boundaries and a free (soft) surface. where p*(r, <j>, z) is a solution of the homogeneous reduced wave equation that vanishes at the surface z = h and gives zero displacement at z — 0, viz. oo
oo
ps(r,<j),z) = ^ e n c o s n < ^ y^{AmnJn(ymr) n=0
+ BmnEn(jmr)}
cos(amz),
m=0
(4.5.16) where j m = +\/(k — a £ J and a m = (2m -f l)w/2h. The unknown coefficients are determined by imposing the hard, dp(r, <j>, z)/dr = 0, boundary condition on the inner, r = a, and outer, r = 6, cylindrical surfaces, using, respectively, the second and first of Eq. (4.5.9) for the incident pressure pi(r, ,z). After some re-arrangement, the unknown coefficients are obtained from the matrix relation 2
mn 5,mn
- 2 i r i c o s ( a m z 0 ) / H^( Tm 6) hDmn \ -rn(7mb)
-R'n(yma) rn(lma)
\f J\
rn(jma)En(jmr0) 3„(ymrQ)E'n(ymb) (4.5.17)
where Dmn = yn(7ma)E'n(fmb)
- 3'n(Jmb)E'n(7ma),
(4.5.18)
is the dispersion relation whose zeros, UJ = u>mn, are the natural frequencies of the fluid region.
113
Hard and Soft Structures
Figure 4.12: Sound level of monopole in axisymmetric channel with hard bound aries and a free surface. Source and receiver are separated by <j> — 90°. Levels are in dB reference 1 micropascal at 1 m.
By expanding the Bessel functions for a large argument, it can be shown t h a t the pressure pi{r,<j),z) is best computed from Eq. (4.5.10). This equation is the alternative form of the Green's function, and it is computationally wellbehaved except when r - r0 and > = 0, i.e. when the receiver is on a vertical line through the source. T h e pressure scattered by the cylindrical boundaries, p 5 ( r , <^,z), is computationally well-behaved unless both source and receiver are located on the same cylindrical boundary. As a numerical example, a water filled channel with dimensions a — 1.0, b = 2.0 and h — 0.5 is considered.
A unit monopole is located at r 0 = 1.5,
<£o = 0 and z0 = 0.25, the receiver being located at r = 1.5, <j) = 90° and z = 0.25. T h e sound level, defined as 20 x log 1 0 (|p(r, >, z)\) + 120, is shown in Figure 4.12. Below the "cut-on" frequency of the first mode, at about 700 Hz, the sound level is negligible. Above this cut-on frequency, the spectrum is dominated by sharp resonant peaks whose m a x i m u m levels are limited only by the finite frequency resolution in the plot, because there is no dissipation in the system. For reference values, it is to be noted t h a t the free-field pressure level of a point source is 120 dB at a distance of 1 m, and the arguments of the Bessel functions
Acoustics of Underwater Structures
114
become real for frequencies greater than 750 Hz, at which frequency the water depth is a quarter of an acoustic wavelength. References and Additional Reading 1. D.G. Crighton et al., Modern Methods in Analytical Acoustics, Lecture Notes, (Springer-Verlag, Berlin, 1992). 2. M.C. Junger and D. Feit, Sound, Structures, and Their Interaction, (second edition, The MIT Press, Cambridge, Massachusetts, 1986). 3. R.J. Urick, Principles of Underwater Sound, (third edition, McGrawHill, New York, 1983). 4. A. Freedman, A mechanism of acoustic echo formation, Acustica, 12 (1962) pages 10-21. 5. E.A. Skelton, Green's function of the reduced wave equation between parallel planes, (Admiralty Research Establishment, Teddington, Mid dlesex, AMTE(N)-TM85025, 1985). 6. P.M. Morse and K Uno Ingard, Theoretical Acoustics, (Princeton Uni versity Press, Princeton, 1968).
CHAPTER 5. ACOUSTIC FINITE ELEMENTS
5.1
Variational Principle
In Chapter 4 it is shown how scattering from hard and soft boundaries can be analyzed analytically when the boundaries are infinite planar, infinite cylindrical and spherical. However, solutions for regions with arbitrary bound aries must generally be obtained numerically, by using a combination of nu merical methods such as the Helmholtz integral equation and the finite element method. These methods can be used to predict low frequency acoustic char acteristics of ducts, tunnels and various enclosures whose boundary reflections make difficult the interpretation of acoustic measurements of noise sources. The Helmholtz integral equation method is described, for axisymmetric surfaces, in Section 14.3. The finite element method applied to field problems is well de scribed in finite element textbooks, such as the seminal accounts of the subject given by Zienkiewicz & Cheung [1] and Zienkiewicz [1], but essential details of the method applied to acoustics problems are of sufficient importance to be included here. Consider the scalar functional defined by integrals of a function of <j> and its first derivatives, viz. n=
/ F{,d/dx,d<j>/dy,d<j)/dz)dV+ f G(,d/dx,d<j>/dy,d/dz)dS, Jv Js (5.1.1) where V is a volume bounded by the surface 5, as illustrated in Figure 5.1(a). Physical meaning can usually be attached to F and G and <j)\ for example, F might be related to energy, G to work done by prescribed boundary motion and <j> to a velocity via the relation v = grad^. It is required to determine the function >, in V, which makes the functional n stationary with respect to infinitesimal 115
Acoustics of Underwater Structures
116
Figure 5.1: Schematic of (a) finite element with surface S bounding a volume V, and (b) an assemblage of elements.
changes 6, via the variation 611 = 0.
(5.1.2)
Assuming a piecewise expansion, in a standard finite element sense,
<j)(x, y,z) = Y^ pt(x>
y>z)^^
(5.1.3)
i=l
where the <j>i are nodal values of the field quantity {x, y) z) and the Pi are shape functions, gives the variation as
OT = (3II/0tfi)tyi + (dIi/d<j>2)S2 + ... + ( 5 n / ^ m ) ^ m ,
(5.1.4)
which being true for any variation 6>i, gives the set of equations
an/a^i = an/dfa = ... = dn/dm = o.
(5.1.5)
If the functional II is of quadratic form, i.e. <j> and its derivatives occur in powers not exceeding two, then the standard finite element equation
[SIM = {/}
(5.1.6)
Acoustic Finite Elements
117
is obtained in which [S] is a symmetric m x m stiffness matrix, {(/>} is a m x 1 column vector of the nodal values of the field quantity
=
/ SjFxtf, d/dx, 84/dy, d<j>/dz)dV Jv + / «<£Gi(
d/dy, d<j>/dz)dS = 0,
(5.1.7)
and because it must hold for all possible variations 8<j), Fi(,d/dx,d/dy,d/dz)
=
Gi(, d<j)/dx, d<j>/dy, d/dz) =
0 in V, 0 on 5.
(5.1.8)
Thus, Fi and G\ correspond in some way to a partial differential equation and its prescribed boundary conditions. Consider the functional
n = \ [ [kx(d/dx)2 + ky(d/dy)2 + kz(d<j)/dz)2]dv * Jv
- I Q<j*dv+ I n(d/dt)dv + / v(d2<j>idt2)dv Jv
Jv
Jv
-IJp^dS-JytdS,
(5.1.9)
in which the terms fid<j>/dt and vd2<j)/dt2 are assumed prescribed functions of the coordinates (x,y^z) at any time t, and hence considered constant for any variation. This means that they can be thought of as equivalent to a fictitious source Q' = —fid<j)/dt — vd2<j)/dt2, say, this being analogous to the well-known d'Alembert's principle of dynamics. The variation of this equation is then STL = / [kx(d/dx)(d6/dx) + ky{dcj)ldy){d6(j>ldy) + kz{d<j>/dz){dS4>ldz)]dV Jv - I Q8<j)dV + I n(d/dt)6dV 4- / v(d2/dt2)6dV Jv Jv Jv - / (38dS - [ y6dS = 0. Js Js
(5.1.10)
In order to put this equation into the required form, Gauss's theorem, as given by Eq. (1.5.1), is applied to each of the vectors (kx(d<j)/dx)6
118
Acoustics of Underwater Structures
(0,ky(d/dy)6,0) and ( 0 , 0 , M ^ / # * W ) >
in v
and on 5
> Siving
/ (d/dx)[kx(d<j*/dx)6]dV Jv =
f [(d/dx){kxd<j>/dx)]6dV+ f [kxd<j>/dx]{d8(j>/dx)dV
=
/ nxkx{d<j)ldx)b(j)dS,
(5.1.11)
and two similar equations in which kx is replaced in turn by ky and kz, n x by n y and n^, and <9/$£ by d/dy and S/dz. Here, % , ny and raz are direction cosines of the outward normal n to the surface 5. By using this equation to replace the first term in the leading volume integral of Eq. (5.1.10), etc., the re-arranged variation is 6U
=
- [ [(d/dx)(kxd/dx) + (d/dy)(kyd/dy) + (d/dz)(kzd/dz)]6(l>dV Jv - f Q6/dt)6(f)dV + / v(d2(f>/dt2)6<j)dV Jv Jv Jv - [ (3(t>8<j>dS - ( y6dS Js Js + / [nxkx(d/dx) + nyky{dldy) + nzkz{d/dz))6dS = 0. (5.1.12)
In order for this formula to be true for all possible variations, <j> must satisfy the differential equation
and the natural mixed boundary condition on S, d(f> d<j) d<j> nxkx— + nyky— -f nzkz— = /?<£ + 7 .
(5.1.14)
The differential equation and boundary condition are of the form of a number of well-known equations of mathematical physics. Further, when /? and 7 are zero, an automatic boundary condition of , d<j> _ dcj) , <9 nxkx— + nyyky— + nzkz — = 0 ox * dy oz
v(5.1.15)
'
Acoustic Finite Elements
119
results. For constant kx — ky — kz — ko, say, the automatic boundary condition of vanishing gradient in the direction of the normal applies, viz. d is found from the energy functional of Eq. (5.1.9), by the finite element method, then it satisfies the differential equation of Eq. (5.1.13) and the bound ary condition in Eq. (5.1.14). It is frequently desirable to divide the surface into two non-overlapping regions Si and 52. On Si the natural boundary condition of Eq. (5.1.14) is implicit. On 52 the forced boundary condition of > = 2-
(5.1.16)
is made explicit by appropriate modification of matrix rows and columns, as will be described later. 5.2
Finite Element Discretization
Let the volume V surrounded by a surface 5 be a typical finite element with m nodes, as illustrated in Figure 5.1. Following a standard procedure, set (x, y, z, t)
=
ai(t)Ni(x, [N(x,y,z)] 1x m
y, z) + a2(t)N2(x,
y, z) + . . . + a m (*)7V m (z, y, z)
{a(t)} m x1
(5.2.1)
where [N(x,y,z)] is a row matrix of m polynomial functions and {a(t)} is a column matrix of m unknowns. Writing this equation at each of the m nodes in turn, gives
W)} raxl
=
[A]
WO),
mx m
mxl
(5-2-2)
where {(t)} is a column vector of the nodal values m{t) of <j>(x,y, z,t), and row i of [A] comprises the row matrix [N(x{, yi, z2-)], where (xi,yi,Zi) are the coordinates of node i. These equations are used to eliminate
0(x,y,z^)=
[J\T(s,y>z)] lxra
[A~l] m x m
{#*)}, mxl
(5.2.3)
which is of the same form as Eq. (5.1.3). This expression is substituted into the functional II of Eq. (5.1.9). A set of m equations is then obtained by application
Acoustics of Underwater Structures
120
of the minimization procedure of Eq. (5.1.5), recalling that terms {<£(*)} and {(t)}+ [C] {<j>(t)}+ [S\ W + mxmmxl mxmmxl mxmmxl
[B] {*} = {fQ} + {/,}, mxm mxl mxl mxl (5.2.4)
where =
[A-1]7
f Jv
[C] =
[A'1]*
f [iV]T/i[AT]dy[A-1], Jv
[S\
[A-Y
[M]
=
[N]Tu[N]dV[A~%
[NGVmNaWA-1],
[ JV
[B] =
-[A-1]7 l T
I [N]TH[N]AS[A-%
Js,
I [N]TQdV, Jv
{fQ}
=
[A~ }
if-r)
=
1 [A-r [A' Y /f [Nf [NYjdS,
(5.2.5)
with [NG] 3x m
=
/ dNx/dx dNi/dy \ dNJdz
dN2/dx dN2/dy dN2/dz
=
[dN/dx,dN/dy,dN/dz]T, 3x m
... ... ...
dNm/dx\ dNm/dy dNm/dz ) (5.2.6)
being a matrix whose rows comprise the grad of the polynomial function matrix [N(x, y, z)], and [K] a diagonal matrix with elements {kX)ky) kz). Eq. (5.2.4) is an approximate solution to the differential equation, given by Eq. (5.1.13), and it also satisfies the boundary condition of Eq. (5.1.14), on S\. Now consider an assemblage of these elements, as shown in Figure 5.1(b). The assembly of the element matrices to form a system matrix must reflect certain continuity and equilibrium requirements, such as continuity of some field quan tity at nodes and equilibrium of another field quantity at a common boundary. Thus, it may be necessary to convert the nodal unknowns on an element to other
Acoustic Finite Elements
121
unknowns, before assembly; for example, for an acoustic problem the potential <j> must be converted to pressure, by the relation p = —pd<j)/dt, as continuity of pressure is required across boundaries, while the potential <j> may be discontinu ous. T h e assembly is simply an organizational procedure best left to a computer program. T h e system m a t r i x
[M.] {Mt)}+[C.] {*.(*)}+[S,] {,}+[B.) {h} = {fQs} + {M, qxq
qxl
qxq
qxl
qxq
qxl
qxq
qxl
qx\
(5.2.7)
qx\
is obtained, in which the number of unknowns, g, is equal to the number of nodes in the assemblage of elements. The subscript s denotes a summation of the element matrices, which is subject to prescribed continuity and equilibrium requirements. For time-harmonic motion (x, y, z, t) = <j>(x, y, z) exp(—\u)t), the time deriva tives are replaced by {4>(t)} = - u / 2 M ,
{<£(*)} = - i " M ,
(5.2.8)
and the assembled m a t r i x equation takes the form [D(u>)]{} = [D(w)] {F(")}
{F(w)}t
=
-u2[Ms]-iu,[Cs]
=
{fQ.)
+ [Ss} + [Bs],
+ {M-
(5-2-9)
T h e m a t r i x [i)(o;)] is the system dynamic stiffness matrix. It is a complex band m a t r i x for which special software can considerably speed up numerical solution for {(f)}. T h e constraints, if necessary, on £2, viz. >(#, y, z) = <j>2, are inserted by appropriate modification of rows and columns of [D(CJ)]. This is done at node i by deleting all elements in row i and column i, setting the diagonal element to unity, and setting the ith element of the excitation {F(LO)}
to the required value
of 2 at the node. Boundary nodes which are not modified by this constraint, and for which the matrices [B] and {/ 7 } are zero, automatically satisfy d
Acoustic Finite Elements In Eq. (5.1.13) to Eq. (5.1.16), set > = p, kx = ky = kz = 1, fi = 0, v = 1/c 2
and <\>i — P2, to give the acoustic wave equation
Acoustics of Underwater Structures
122
and boundary conditions —
Here, d/dN
= /?p + 7
=
Pp + pu2ui,
p
—
p 2 , on 52-
say, on S i , (5.3.2)
is differentiation in the direction of the outward normal to S i ; /?
is a prescribed boundary impedance condition on S i ; j = pu>2ui where i*i is a prescribed displacement in the direction of the outward normal to S i ; P2 is a constraint to be forced on S2 by modification to rows and columns of the system m a t r i x . T h e function Q is a sound source which is discussed later. Assembly of individual finite elements to form a system dynamic stiffness m a t r i x requires continuity of pressure and equilibrium of normal displacements at nodes. T h e former requirement is easily understood. The later requirement is evident when it is noted t h a t at a common interface of two elements, the normal displacements are equal but of opposite sign because the normal directions differ by 180°; equilibrium requires t h a t the sum of these displacements is zero. T h e system m a t r i x equation is
-«2[MS] q Xq
{p.} + [S.] q X 1
{Ps} q X I
q X q
+ [Bt]
{p3} q X 1
q X q
= {fQs} + {/7S}, q X 1
q x 1
(5.3.3) which is assembled from the element matrices
[M] = (l/c2)[A-1f
I [N]T[N]AV[A-\
[5] = [A-lf [ [NG}T[NG]dV[A-% Jv 1 [B] = -[A- ]* I [N}Tp[N]AS[A-\ Jsx
l T
{/Q} = [A~ ] if,}
Jv
t[N]TQW,
2
= pu [A-'}T j [NfWdSiA-1]^},
(5.3.4)
JSi
where [NG] = [dN/dx,
dN/dy,
dN/dz]T
(5.3.5)
is a m a t r i x of order 3 x m. It has been assumed t h a t the density p and sound speed c are constant in an element, but these values can be different in different
Acoustic Finite Elements
elements.
123
T h e prescribed boundary displacement at the nodes, {t*i}, arises
from the assumption t h a t the prescribed displacement u\{x, y, z) on the element boundary is approximated by the same polynomial function m a t r i x [N(x, y, z)] as the pressure. In the system m a t r i x , nodes on the boundary not constrained by the b o u n d a r y condition of prescribed displacement, or the boundary condition p = p2 set by modification of m a t r i x rows columns, are automatically constrained to zero normal displacement, u\ = 0. T h e condition for nodes with p 2 = 0 is the soft boundary condition, while the "automatic" condition for nodes not subjected to constraints is the hard boundary condition. Assembly of elements, in t h e usual finite element way, guarantees continuity of pressure at nodes and equilibrium of n o r m a l displacement across a common boundary.
5.4
Radiation Boundary Condition If the fluid extends to infinity, then the finite element idealization must be
t e r m i n a t e d at a suitable distance by a boundary. From this boundary to infinity various options are possible, among which is a radiation boundary in the acoustic far field or a Helmholtz impedance boundary which can be located in the near field. T h e radiation b o u n d a r y is a sphere with surface Soo, comprising part of S\, as shown in Figure 5.2. It is of sufficiently large radius i?i, so t h a t the pressure exterior to it is in the acoustic far field; thus, Pj(R,9,4>)
= A(0,<j>fXpi^R),
for R>
Rlt
(5.4.1)
where A(0, (j>) is the angular distribution of the pressure, and here k = u/c is the acoustic wavenumber. T h e outward normal derivative of pressure on the sphere
Comparing this equation with Eq. (5.3.2) shows t h a t the fluid extending from the spherical surface to infinity can be approximated by the boundary condition (3 = ( i t - 1/Jii),
tii = 0,
(5.4.3)
on t h a t part of the surface S\ which comprises the sphere boundary. Thus, the effects of a radiation boundary can be incorporated by assembling into the m a t r i x
Acoustics of Underwater Structures
124
Figure 5.2: Spherical radiation boundary, sufficiently far from sources and scattering surfaces to be in the far field; and Helmholtz impedance boundary tightly enclosing sources and scattering surfaces. [B8] the matrices [B] for the elements which comprise the sphere's surface, the prescribed value of (3 being given by Eq. (5.4.3). This procedure is a recipe that provides a solution to an infinite domain problem with minimal programming effort. However, it may result in a large number of finite elements when, by trial and error, the placement of the radiation boundary is found to require a large value of Ri. The Helmholtz integral equation method has been found to be a promising alternative to a radiation boundary. Surround the sources and boundaries by a simple smooth radiation surface Shi comprising part of Si, as shown in Figure 5.2. The dimensions of the surface are kept as small as possible to minimize the number of interior finite elements. It is not necessary for this exterior surface to be in the acoustic far field, which was the case for the spherical radiation boundary. The discretization of the Helmholtz integral equation, as described in Section 14.3, results in the matrix equation [Bi(w)]
{p}
j Xj
j X 1
=
[B2{UJ)} j Xj
K,, j X 1
(5.4.4)
Acoustic Finite Elements
125
where there are j nodal points on the surface, {ue} is a matrix of prescribed normal displacements which produce pressures {p} at the surface nodes on ShAssume that an individual finite element, whose surface comprises part of Sh, has prescribed nodal matrix displacement {u} on the artificial boundary; the excitation matrix is
{/7} = pu\A-']T
I [N)T{N]dS[A-'}{u}.
(5.4.5)
Assembly over all surface elements which form the boundary Sh, noting that rows and columns corresponding to interior nodes are not included in the assembly process, results in the system matrix {/7S} = [B3(u)]
{ue}.
j x 1
j X 1
j Xj
(5.4.6)
By eliminating {ue} from this relation, using Eq. (5.4.4), the boundary element matrix equation {/ 7 .} = [B3(u,)] j x l
[B2(u)]~i
[B^)}
{p}
j Xj
j Xj
j X1
j Xj
(5.4.7)
is obtained. T h e m a t r i x [He(u>)] = j x j
[B3(u>)] j x j
[^M]j x j
1
[BiH] j x j
(5.4.8)
must be added, in t h e finite element sense, to the system dynamic stiffness m a t r i x . T h e Helmholtz integral equation matrices B\ and Bi are not symmetric, so neither is the modified system m a t r i x . This is usually of little consequence for forced response calculations because software for solving unsymmetric band matrices is readily available. T h e system bandwidth is unaltered if the nodes on the bounding surface, Sh, are numbered in a suitable way, from 1 to j say. T h e Helmholtz integral approach includes the transition from the complex near field to t h e spherically spreading far field, thus allowing the economy of a boundary element m e t h o d t o be combined with the versatility of the finite element method.
5.5
Sources of Sound T h e sound sources can be obtained from Chapter 3 as Q = 4TT5(X) = 4TTQ06(X.
- x 0 ) - F 0 .V(5(x - x 0 ) ,
(5.5.1)
Acoustics of Underwater Structures
126
where Qo is the amplitude of the monopole and F 0 is the fluid force vector which has components {F0}T = [Fox,FoyiFoz]. Both monopole and force vector are located at xo = (#o, yo> ^o)- The excitation vector for this source distribution is given in Eq. (5.3.4) as
{/} = [A~X]T I [NfQdV, Jv
(5.5.2)
and the integration is trivial when the properties of the delta function are used. Thus, {fQ} = 47r[A-1f[AT(xo)]TQo + [A^flNa^fiFoh
(5-5.3)
comprises the excitation vector on an element excited by a monopole and a fluid force. 5.6
Axisymmetric Elements
For an axisymmetric surface subjected to prescribed acoustic sources and boundary conditions, the dimensionality of the problem can be reduced by a semi-analytical procedure in which variables are expanded as Fourier series in the circumferential angle , viz. CO
f{<j>) =
CO
y ^ an cos(n
n=l /»2TT
an
=
(e„/27r) / Jo
bn
=
(1/2TT)
/(^)cos(n^)d<^,
/ f(<j>)sm(n<j>)d<j>. (5.6.1) Jo Because of the orthogonality property of the harmonic functions, a separate analysis can be carried out for each harmonic n in turn, total values being obtained by summing the Fourier series. To simplify the notation, only the cosine series is considered. Thus, p{r^,z)
=
^2pn(r,z)cos(n), n=0 oo
u\{?A,z)
=
yZuin(r, n=0
z)cos(n<j)),
Acoustic Finite Elements
127
Q(r,0,z)
=
^Q n (r,z)cos(n)), n=0 oo
P(r,,z) =
^p n (r,z)cos(n>), n=0 oo
N{r,(j),z)
=
]TiV n (r,n,z)cos(n(£), n=0
[Afc]
=
[dN/dr, dN/rd, dN/Oz]1 ,
(5.6.2)
and it is to be noted that the <j) component of the Fourier expansion of [NG] varies as sin(n<^). The system matrix equation is -J1
[Mt] {Pn} + [St] {pn} + [B.] qx q qx 1 qx q qx 1 qxq
{/7.}, gxl (5.6.3) where q is the number of nodes in the idealization. This is assembled from the element matrices, obtained from Eq. (5.3.4), [M(n)]
=
(27r/enc2)[A-1]T
[S(n)}
=
(27r/en)[A-1)T
[B(n)]
=
-{2*/en)[A-l]T
j
{/(«)}
=
(2ir/en)[A-1]T
[ Jx
{/»}
=
(2ir^2/en)[A-1]T
{Ps} = qx 1
{fQs} gxl
+
f [NnflN^rdrdzlA-1], Jx f [Ar nG ] T [7V„ G ]rdrdz[^- 1 ], Jx [Nn]Tp[Nn]rdL[A-\ [Nn]TQnrdrdz, j [NnfiNnjrdLiA-1]^^},
(5.6.4)
where the area integrals, X, are over the element cross-section, and the line integrals, L, are over the relevant part of the cross-section boundary. The inte grations of cos2(n<j)) and sin2(n<£), over the angle <j> which ranges from 0 to 2ir, have been done analytically; they are simply 27r/e n . The cross-sections of simple axisymmetric finite elements are shown in Fig ure 5.3. The 3-noded linear triangular element has a polynomial function matrix [Nn(r,n,z)]
= [l,riz]i
(5.6.5)
Acoustics of Underwater Structures
128
Figure 5.3: The axisymmetric triangular and octagonal elements are formed by rotating their cross-sections about the z axis. for which [NnG(r,n,z)]=
/ 0 I -n/r \ 0
1 -n 0
0 -nz/r 1
(5.6.6)
The 9-noded quadratic octagonal element has a polynomial function matrix [Nn(r} n, z)] — [1, r, z, rz, r2, z2, zr 2 , rz2, r2z2],
(5.6.7)
for which / 0 1 0 z 2r 0 2zr z2 2rz2 \ 2 2 [JVnc(r, n, 2)]= I — n / r — n —nz/r —nz —nr —nz /r —nzr —nz —nz2r\. 2 2 \ 0 0 1 r 0 2z r 2rz 2r ^ / (5.6.8) Although closed form expressions can be obtained for some of the integrals in Eq. (5.6.4), it is preferable to calculate then numerically using the quadrature formulae described in Section 1.11. For monopole and point force excitation, located at coordinates (r0,>o,^o) in an element, the excitation vector is explicitly calculated as {/«(")} = 4TQO cos(n<6o)[J4-1]T[iV„(ro) n, z0)f + [A^flNnairo,
n,
zo)f{Fn},
Acoustic Finite Elements {Fn} = [ i ? r c o s ( n ^ o ) , ^ s i n ( n 0 o ) , ^ c o s ( n ^ o ) ] T .
129 (5.6.9)
While the 3-noded triangular element is suitable for monopole and force exci tation, it should not be used for a quadrupole excitation because the double gradient acting on a linear variation in r and z makes the excitation vanish! Eq. (5.6.2) to Eq. (5.6.9) are specific to the Fourier cosine series. A separate analysis for the sine series is straightforward: simply replace [Nno{r} n, z)] by [iVn(?(r, —n, z)], and replace the excitation by { / Q W } = 47rQosin(n0o)[A-1]T[J^ {Fn} = [Fr sin(n^o), F+ cos(n<£0), Fz sin(n^ 0 )] T .
(5.6.10)
For a numerical example to illustrate the versatility of the finite element method, the low frequency acoustics of hard and soft cylindrical ducts is con sidered. The finite ducts are of inner radius 0.65 m, outer radius 0.70 m and length 1.2 m; they are immersed in water which extends to infinity everywhere. The geometry is shown in Figure 5.4, but for the numerical results described below, more than five times the number of elements shown are used in the ide alization. The outer boundary of the idealization comprises a cylinder of length 2 m with hemispherical endcaps of radius 1 m; this is a boundary at which the Helmholtz integral equation is used to describe the exterior sound pressure. The excitation is a unit monopole located at the duct's mid-point. The output from a finite element computer program is sound pressure at the nodes. Pressures at nodes on the outer boundary are converted to far field pressures by using the Helmholtz integral equation, as described in Section 14.4. In Figure 5.5 is shown far field sound levels versus the spherical angle 0, broadside being 6 — 90° and endfire 0 = 0 and 180°. The levels are in decibels reference 1 micropascal at 1 m, so the omnidirectional sound level in the absence of the duct would be 120 dB. For both excitation frequencies, 200 and 400 Hz, the far field sound levels are reduced dramatically when the monopole is inside a soft duct. For the case of a hard duct, pressures are enhanced near broadside, especially at 400 Hz where there is a 12 dB increase above the free field level of 120 dB. In Figure 5.6 is shown far field sound levels versus frequency. The maximum level, near to 400 Hz, at broadside when the duct is hard stems from a weak "organ pipe" resonance.
130
Acoustics of Underwater Structures
Figure 5.4: Finite element idealization of cross-section of axisymmetric fluid region bounded externally by a Helmholtz boundary. Inside the region is a finite h a r d or soft duct, shown as a rectangular region without elements.
Figure 5.5: Angular distribution of far field sound radiation from a unit timeharmonic monopole located at the centre of a hard duct, , and a soft duct, . . . , the excitation frequencies being 200 and 400 Hz. Levels are in dB reference 1 micropascal at 1 m.
Acoustic Finite Elements
131
Figure 5.6: Far field sound radiation from a unit time-harmonic monopole lo cated at the centre of a hard duct, — , and a soft duct, . . . , the (a) plot being at broadside and the (b) plot at endfire. Levels are in dB reference 1 micropascal at 1 m. References and Additional Reading
1. O.C. Zienkiewicz and Y.K. Cheung, Structural and Continuum Mechanics, 2. O.C. Zienkiewicz, The Finite Element (McGraw-Hill, London, 1971). 3. S.S. Rao, The Finite Element Method Pergamon Press, Oxford, 1989).
The Finite Element Method in (McGraw-Hill, London, 1967). Method in Engineering Science, in Engineering, (second edition,
CHAPTER 6. ELASTIC EQUATIONS AND CONSTITUTIVE RELATIONS
6.1
S t r a i n a n d Stress
Stress and strain are fundamental engineering concepts which are required when formulating and solving dynamics problems. Several different notations are in use, among which are the "engineering" definitions used here. In cartesian coordinates, the linearized strains are defined as € lxy
_dUX
8ux
€
" = &T«
"~dJ
+
dUy
~fa'
lyz
™
=
_3Uy
~'dT
duy
€
"
W +
dUZ
'd7'
7z
=
8uz
~dT' _dUZ
+
*--fa ~d7'
3UX
(51jj
where cxx, cyy and ezz are the direct strains and jxy, jyz and j z x are the shear strains which are symmetrical, for example, yxy = jyx. The quantities (ux>uy,uz) are infinitesimal displacements at the point (#,y,z). In cylindrical coordinates the strains are defined as dur 1duA, ur duz i A » A i/ I _ I * t I * * _ ! * 1 y._^± + i^L ~ =l * ! l + * r 8<j> dr rj ** 8z ^ r 8<j> , zr 8r In spherical coordinates the expressions for the strains are more 77 rr ( .
€RR
_ duR h du6 uR + ~~dR' nee~1"W ~R' Idun , dul_uL i m R 86 8R R' 'H _8u$ 1 ,R
t --8R
+
» ^ l (6i2) ^ dz ' ^ ' ' complicated,
_
1 saj, uR uB Rsin6 8<j> m #~ + fl"COt ' 1 due 1 8u, u* Rsm6 8<j> R 86 R 1 8uR uj, tH
~
R^T6~dT-l[(6.1.3) 133
;
Acoustics of Underwater Structures
134
Figure 6.1: Stresses in z-direction on a small control element. Stresses in other directions are omitted for clarity. Arrows start at the centres of the faces on which the stresses act. T h e aforementioned strain definitions are independent of whether or not the elastic solid is isotropic or anisotropic. In Figure 6.1 are shown stresses in the x-direction only, acting on a fixed rectangular control volume. A normal stress is positive if it is directed away from the surface on which it acts, which is the opposite of fluid pressure; thus, the stresses axx(x
-f dx) and crxx(x)
shown in the diagram are both tensile stresses.
If the stress is directed towards the surface on which it acts it is a negative or compressive stress. On a surface for which the positive direction of the normal stress is in the positive direction of the axis parallel to the normal to the surface, a shearing stress is positive if it acts in one of the other two coordinates positive directions; the situation is reversed on the opposite surface, thus, the stresses Tyx(y + dy) and ryx(y)
shown in the diagram are both positive shear stresses.
While an is the stress in the zth direction acting on a surface whose normal is also in the ith direction, r^- is a shear stress acting in the j t h direction on a surface whose normal is in the ith direction, and r2J = 7},-. An elementary derivation of the equations of equilibrium proceeds from the rectangular element shown, all quantities involving second order terms being
Elastic Equations
135
discarded without comment. Newton's second law of motion applied in the x direction gives d2ux pdxdydz-^-
-
Fxdxdydz +
y,z + dz, t)dydx -
TZX(X,
y, z, t)dydx.
(6.1.4)
Here, Fx(x,y, z,t) is a body force per unit volume in the x direction, and p is the material's density. For a gravity body force, with acceleration compo nents (-gx,-gy,-9z), say, the body force vector is (—pgx,-p9y,—P9z)Sim ilar equations can be obtained for motion in the y and z directions; these are not shown here. By expanding the stress components to first order, viz. &xx(x + da:, y, z, t) = &xx(x, y, z, £) + (daxx/dx)dx, etc., and then later dividing throughout by the element volume, d#dydz, the stress equilibrium equations in cartesian coordinates are obtained as daxx dx drxy Ox drxz
t
+
+
dryx t drzx i ^ ^dyi ± + ^dzL + Fx dayy drzy dy + dz + *y dryz d
-dx-+-di + ~dz- + Fz
=
pl
_ -
=
P
P
d2dt2 d2uy dt2 ' d2uz (6 L5)
^#'
'
In cylindrical coordinates these equations are dcrrr dr
Idr^r drzr r d(j> dz drr(p 1 dcr^ dr r d
1 r drz<^ dz <9
2 r 1 + r +
Y
d2ur dt2 ' d2u(p a/ 2 <9 2 u z
^7 r ^ - a T r - ^ = '"aF-
(6L6)
In spherical coordinates the equations are much more complicated, do-RR +
1 droR +
1
STR*
1 5^^ # 50
dr^R
cot0
<92Ufl
1
2
^^ ^"aT ^sin^ ^ + - ^ ^ + f l ( ^ - ^ - ^ ) + ^ = P"air. 2 oR
1 Sr^ 3 #sin0 d<j> R
cot0 R
<9 t/0 dt2
Acoustics of Underwater Structures
136
dTRt , 1 drH
,
1
dau
, 3
2cot
,
F
_ /
2
^
(6.1.7) The stress equations are independent of whether or not the elastic solid is isotropic or anisotropic. The matrix relation between stress and strain, viz. {a} = [D]{e}} completes the description of a linear elastic solid. The 6x6 matrix [D] is the constitutive stiffness matrix, considered in Sections 6.5 and 6.6, whose elements depend on whether or not the elastic solid is isotropic or anisotropic. 6.2
Isotropic Displacement Equations
In cartesian coordinates, for an isotropic elastic solid, the relations between stress and strain are particularly simple. They are &xx = Ae + 2fieXX}
ayy = Xe + 2ficyy, T
Txy = fJ-Jxy j
yz — fJ'Jyz >
azz = Xe + 2fiezz, T~zx — f^Jzx ?
ox ay oz where A and // are the Lame constants and e is called the dilatation. The stresses are replaced in Eq. (6.1.5) by strains, by making use of Eq. (6.2.1), and then the strains are replaced by displacements by using Eq. (6.1.1). The resulting equations are written in vector form as (A + /i)V(V.u(x,*)) + /iV 2 u(*,<) + F(x,t) = P ^ f f i 0 ,
(6.2.2)
where u(x,tf) = (uX) wy, uz) is the displacement vector and F(x, t) = (FXi FyyFz) is the body force vector. In cylindrical coordinates, the relations between stress and strain are
a^ = Xe + 2//e^,
Tr = fl>Jri
T^z = flj^
e = V.u,
,
azz = Xe + 2fiezz, Tzr = fljzr
,
(6.2.3)
Elastic Equations
137
and in spherical coordinates they are CRR
= Ae + 2fi€RR,
(TQQ = Xe + 2pLCeg,
7ft0 = HJR9,
T~o = ^70<£>
< T ^ = Ae + 2/ie<^, 7-0J* = ^7<£il>
e = V.u.
(6.2.4)
The displacement equations in cylindrical and spherical coordinates are also given by Eq. (6.2.2), provided the interpretation V 2 u = V(V.u) - V x (V x u)
(6.2.5)
is strictly applied. Recall that V 2 u is not equal to V 2 operating on the separate components of the vector u, except in cartesian coordinates, as demonstrated in Section 1.4. The three components of the displacement equations can be expanded out, by making use of the relations for V, V. and V 2 given in Section 1.4, but it is generally not profitable to do so in cylindrical and spherical coordinates. The re arranged displacement equation, which is independent of the coordinate system, is (A + 2/i)V(V.u) - /iV x (V x u) + F(x) = p ^ .
(6.2.6)
This equation can be reduced by the substitutions u
=
Vtf + V x P ,
F
=
V^/4-VxPy,
(6.2.7)
to V ^ (A + 2//)V 2 tf + * / - p-^-j
+ V x ^ * V 2 P + P , - p-^j
= 0. (6.2.8)
Particular solutions of this equation are <92\P (A + 2 A i ) V 2 * - / > - ^ / i V ' P - ^
=
-*/.
=
-Pf,
(6.2.9)
which are the scalar and vector wave equations of linear isotropic elasticity. Because there are four unknowns, ^ and P , for finding the three displacements,
Acoustics of Underwater Structures
138
u, a supplementary condition is required. This is the commonly used gauge condition V.P = 0. (6.2.10) Separable solutions of the homogeneous vector wave equation, the second of Eq. (6.2.9) with P / = 0, are straightforward in cartesian coordinates. Got tlieb [1] has shown that separable solutions are possible in cylindrical coor dinates. The authors are unaware of general separable solutions in spherical coordinates. If the equations of elasticity are to be solved in cartesian coordinates in a region V bounded by a surface S with normal n = (nXl ny,nz), where nx, ny) and nz are direction cosines, then the boundary conditions are those of prescribed surface stress tractions A-
—
i^x^xx
\ ilyixy
\
'*'Z'ZX)
i
—
HxTxy
v Tly&yy
i
^z^"yzj
Z
=
nxrzx +nyTyz +nzcrzz,
(6.2.11)
over all S, prescribed surface displacement u 5 over all 5, or prescribed trac tions on part of S and prescribed displacement on the remaining part. Similar boundary conditions are obtained for the equations of elasticity in cylindrical and spherical coordinate systems. In the absence of body forces, and for time-harmonic excitation, the standard substitutions and resulting equations are written as Vf + V x P
=
u,
V tf + fc?¥ =
0,
2
2
2
V P + fc P = V.P
=
0, 0.
(6.2.12)
In these equations kj = CJ/C/ and ks = u>/c5, where Q = >/{(A + 2fi)/p} and cs — y/{fj>/p) are the phase velocities of longitudinal and shear waves in unbounded media. Stresses and strains can be written in terms of the functions \P and P by using definitions given in previous sections. Alternative substitutions, which have proved profitable in the analysis of the acoustics of isotropic layered media, considered in later chapters, find useful
Elastic Equations
139
application. In Eq. (6.2.12), let P = (0,0, G) + V x (0,0, H),
(6.2.13)
and replace the operator V 2 in the third equation by that of Eq. (6.2.5), giving V 2 (0,0,G) + fc2(0,0,G) =
V x (V 2 (0,0,//) + A : 2 ( 0 , 0 , ^ ) - V ( V . ( 0 , 0 , ^ ) ) ) V x (V 2 (0, 0, H) + fc2(0,0, H)) .
=
(6.2.14)
In cartesian and cylindrical coordinates, particular solutions of this equation are V2G + k2sG 2
2
V H + k sH
=
0,
=
0,
(6.2.15)
because V 2 (0, 0, G) = (0, 0, V 2 G), as can be deduced from the expressions com prising Eq. (1.4.6) and Eq. (1.4.7). However, this is not the case in spherical coordinates, as can be deduced from Eq. (1.4.8). Thus, for both cartesian and cylindrical coordinates, when u
=
Vtf + V x P ,
P
=
(0,0,G) + V x ( 0 , 0 , # ) ,
(6.2.16)
solutions of the reduced wave equations V 2 tf + fc,2tf = 2
2
V G + ib G 2
2
VH +kH
0,
=
0,
=
0,
(6.2.17)
give values of u which are solutions of the time-harmonic displacement equations, in the absence of body forces. Stresses and strains can be written in terms of the functions \£, G and H by using definitions given in previous sections. For spherical coordinates, when field quantities are independent of the angle >, appropriate substitutions are u
=
V^ + V x P ,
P
== (0,0, G),
(6.2.18)
Acoustics of Underwater Structures
140
giving =
0,
= . 0,
i t 2 sin 0
(6.2.19)
since, for the case of (j) independence, V 2 ( 0 , 0, G)= (0,0, V 2 G - G/R2 sin 2 $) as can be deduced from Eq. (1.4.8). 6.3
Finite Element Variational Principle If a volume V of an elastic solid is bounded by a closed surface 5 , then
the elastic potential energy V is the strain energy minus the work done by body forces and surface tractions. Thus, with the vectors x and s denoting field points in a volume V and on a surface 5 , respectively, V
=
i^{e*(x,t)}TMx,*)}dV -±Jv{u*(x,t)}T{F(x,t)}dV-lJv{u(x,t)}T{F*(x,t)}dV
- /
{u*(s,t)}T{T(s,t)}dS-
i y " { U ( s , < ) } T { n s , < ) } d S , (6.3.1)
where {u(x, t)} is a column vector of displacements; {F(x, t)} is a column vector of body forces per unit volume; { T ( s , / ) } are surface tractions, being forces per unit area whose components are defined as positive if they are acting in the pos itive directions of their axes; {e(x,tf)} and {&(x,t)}
are column vectors of strain
and stress. T h e complex conjugate on vectors, and an arrangement of surface and volume force components as the sum of terms of the form a*6-f aft*, is necessary to make V real when field quantities are represented by complex variables. The arrangement is not necessary for the strain energy because {e*} T {
{^}T{o'*}
by virtue of stress and strain vectors being related by a real symmetric matrix, as later described. W h e n all field quantities are real the expression for V reduces to the s t a n d a r d definition for potential energy of an elastic solid. T h e kinetic energy is T
= \J
where p is material density. {ii*}T{u}
= {ii}T{u*}.
^«*(x'<)}T{«(x,t)}dV,
(6.3.2)
T h e function T is both real and positive, and
Here, when displacement and force column vectors are
Elastic Equations
141
assumed of length three and stress and strain vectors of length six, field quantities are those defined in previous sections. In certain circumstances, when analyzing thin shells for instance, displacements and forces can also include rotations and moments, respectively. Thus, generally, displacement and force vectors are of length Ni and stress and strain vectors are of length 7V2. By following a standard dynamical procedure, a suitable functional is the Lagrangian, C.= T — V, where
c =
5X p { "* ( x ' t ) } T { " ( x ' < ) } d v ~5X { c * ( x , < ) } T [ D ] { £ ( x ' t ) } d v 1
-jju*(xyt)}T{F(X,t)}dV+±Jv{u(x,t)}T{F*(x,t)}dV
+
+ \ Js{u*(s, t)}T{T(s, t)}dS + \ Js{u(s, t)f{T*(s,
t)}dS. (6.3.3)
The stress has been eliminated by using the constitutive matrix relation, {cr(x, t)} — [D]{e(x,tf)}, where the matrix [D] is defined in Sections 6.5 and 6.6 for isotropic and anisotropic elastic solids, respectively. There is a requirement that [D] is both real and symmetric to make real the function {e*(x,t)}T[D]{e(x,t)}. A further constraint on the stiffness matrix [D] is that it should be positive definite to make the strain energy positive. The differential equations of motion and the traction boundary condition can be obtained from Hamilton's variational principle 6 I* £dt = 0,
(6.3.4)
when the strains {e(x)} are replaced by the displacement derivatives obtained from Eq. (6.1.1), displacements and their complex conjugates being assumed independent variables. The procedure closely follows that of the field problem considered in Section 5.1. Let the volume V surrounded by a surface 5 be a typical finite element with iV3 nodes. In what follows, the meaning of the "symbolic" operations will be made clearer in later chapters which consider actual finite element problems. Following a standard procedure, let {«(x,0}
=
{«(x,-,i)}
=
{u(x,t)}
=
[iV(x)]{a(f)}, [A]{a(t)}, [tfWp^Hute,*)},
(6-3.5)
Acoustics of Underwater Structures
142
where [JV(x)] is a matrix of polynomial functions, {a(t)} is a column matrix of unknowns, and {u(xi,t)} is a column vector of the values of {u(x,t)} evaluated at the nodes. Further, by assuming that the strains can be put into the form {e(x,i)} = [BWRA-^Mxiti)},
(6.3.6)
the Lagrangian can be re-written as £
=
l^ixi^flA-1]*71
p[N*(x))T[N(x)]dV[A-1]{u(xiJ)}
- ^ ( x ^ f i A - ' r
7
J^B^x^mBix^dVlA-^Mxij)}
+{u*(xi,t)}T[A-lrT\Jv[N*(x)}T{F(x,t)}dV +Mxi,t)}T[A-1)T\
Jv{N(x)f{F*(x,t)}dV
+{«*(*,, t)}T{A-'rT\ +{u(xi,t)}T[A-1]Tl-
j[N\s)]T{T{s,
t)}dS
J [N(s)f{T*(S,t)}dS.
(6.3.7)
When u(xi,t) and u*(xi,t) are considered independent coordinates, the functional is minimized by applying Lagrange's equations d dC dt du*(xi)
8C du*(xi)
±_dC_
dC
dtdu(xt)
du(xi)
—
u,
'
"'
{b 6 }
-*
to each separate displacement, w*(xt) and w(x,), of the vectors {u*(x,, <)} and {u*(xi,t)}, respectively. On applying Lagrange's equations using the u*(x,) coordinates, the matrix equation [M]{u(xi,t)}
+ [S]{u(xi,t)}
= \Fv(t)} + {F.(t)}
(6.3.9)
is obtained, where the mass matrix, stiffness matrix, body force excitation vector and surface traction excitation vector are [M]
=
[A-1]^
f Jv
p[N*(x)f[N(x)}dV[A-%
Elastic Equations
143
[S] =
[A-i]*T [ Jv
[B*(x)f[D}[B(x)}dV[A-^
{Fv(t)}
=
[A'1}*?
{Fs(t)}
=
[A-1]*7 [[N*(s)]T{T{s,t)}dS. Js
Jv
f[N*(x)]T{F(x,t)}dV, (6.3.10)
For time-harmonic motion, Eq. (6.3.9) becomes [[S]-u>2[M]] N rN 3 x N XN 3
Wxt)W)} = N XN 3 x 1
{FV(LJ} + {F,(a;)} N XN3 x 1
(6.3.11)
for a finite element with N3 nodes and N\ unknowns at each node. Following the procedure described in Section 5.2, an assemblage of elements gives a system matrix equation of the same form as Eq. (6.3.11). The assembly of the elements reflects the fact that the assemblage functional is a sum of the element functional. Displacement constraints at nodes are inserted by appro priate modification of assembled matrix rows and columns. For example, if all elements in row and column i are set to to zero, except for unity on the diago nal, and the ith element in the excitation vector is set to zero, then this a forced condition of zero displacement for coordinate number i. On applying Lagrange's equations using the U(XJ) coordinates, the matrix equation of motion [Mf{ii'(x,-,0} + [ S f K ( x ^ ) } = {Ft(t)} + {Ft(t)}
(6.3.12)
is obtained. When the complex conjugate of this matrix equation is taken, and the mass and stiffness matrices assumed Hermitian, viz. [M*]T = [M], [S*]T = [S],
(6.3.13)
then Eq. (6.3.9) is recovered. When damping is included in the stiffness matrix [D], as described in a later section, then the stiffness matrix [S] is not Hermitian, so this pragmatic approach to include material damping in the matrix equations is only conceptually possible following on from Eq. (6.3.9). Other properties of Hermitian matrices relevant to dynamics problems can be found in Section 1.10.
144
Acoustics of Underwater Structures
Table 6.1: Illustrative constants for fluids.
iFluid [Air Water Machine Oil jSilicone Oil 6.4
/»(kgm 3 ) 1.21 1000 900 800
c (m s ) 343 1500 1600 2000
B (Pa) 1.42xl0 U5 2.25 xlO 0 8 2.30 xlO 0 9 3.20 xlO 0 9
\i (Pa s) 1.80xl0-° 5 LOOxlO" 03 l.OOxlO- 01 4.0
v (m s *)| 1.49x10-°^
l.OOxlO-H, l.llxlO-H 6.25xlO-°J
Fluid Constants T h e constants of interest for fluids and gases are density p, sound speed
c, bulk modulus B = pc2, dynamic coefficient of viscosity p and the kinematic coefficient of viscosity v — p/p.
These constants can vary with pressure, temper
ature and time-harmonic frequency of excitation. Specialized textbooks, such as t h a t of Kaye & Laby [3], should be consulted for recognized numerical values. Typical constants are given in Table 6.1. W h e n a fluid, such as water, contains a small proportion of a gas, a low sound speed can be achieved. Let water have sound speed cw and density pw, and air have sound speed ca and density pa. Let the fractions per unit volume of air and water be k and (1 — fc), respectively. Simple mixture theory gives the effective density, sound speed and bulk modulus of this "bubbly" fluid as
P=(l-*)Ptn+*pa,
C=y/(B/P),
B-l
=
{l-k)/Pxvcl+{khP), (6.4.1)
where 7 = 1.4, for air, is the ratio of specific heats at constant pressure and constant t e m p e r a t u r e , and P ~ 9.81pw(h
+ 9.75) is the ambient pressure at
submergence depth h. These formula, valid for low frequencies well away from bubble resonant frequencies, give a small k value of c = ^(jP/kpw).
As an
example, take k = 0.01 and a depth of h = 50 m, to give the low sound speed c = 286 in "bubbly" water of just 1% air content.
6.5
Isotropic Elastic Constants A material is isotropic if its properties measured at any fixed reference po
sition are independent of direction. This must be distinguished from the term homogeneous which means t h a t properties measured in a certain direction do
Elastic Equations
145
not change with location. T h e scale of any inhomogeneities is crucial.
Thus
consider, for example, an isotropic infinite elastic solid with periodically spaced isotropic circular fibres, which are parallel to the x axis. On length scales large compared with the periodic spacing, the composite can generally be regarded as anisotropic; on a length scale small compared with the periodic spacing the composite is regarded as comprising its isotropic component parts. For an isotropic elastic solid, the symmetric constitutive stiffness m a t r i x [D], relating the stress and strain matrices as {a} — [D]{e}, is
/ A + 2// A A A A + 2/J A A A A + 2p [D} = 0 0 0 0 0 0 \ 0 0 0
0 0 0 ^ 0 0
0 0 0 0 \x 0
0 \ 0 0 0 0 fi )
(6.5.1)
where
M =
[&XX ) Gyy , &ZZ i Ty z j Tztf) ^ F t / J
) j
{a}
=
[ 0 " r r , (Tffxf,) (Tzzi
{a}
=
[&RR,
W = U) = U} =
T(f>zi TZr*5 Tr\
ved,<7, Te, T ^ R , TRQ]
l^xx) £yy 5 ^zz •> "Jyz 5 ~Yzx ) lxy\
>
[€rr , 6 ^ 0 , €zz , y^z,
5
yzr 1 Jr\
[tRR, toe, £4>,le, 7^R> IfRe]
,
,
(6.5.2)
are the stress and strain column vectors in cartesian, cylindrical and spherical co ordinates. T h e subscript order, (xx,yy,
zz,yz,zx,xy)
for cartesian coordinates,
is a widely adopted standard. For other subscript orders, the corresponding [D] m a t r i x is obtained by interchanging rows and columns. For example, the sub script order (xx, yy, zz, xy, yz, zx) is frequently used: in this case, in Eq. (6.5.1), replace row 4 by row 6, row 5 by row 4 and row 6 by row 5, the same pro cedure being necessary for the columns. For this example, the [D] matrix of isotropic elasticity is unaltered. No particular choice of subscript order should be anticipated. T h e constants A and /i are the two independent Lame elastic constants. The constitutive stiffness m a t r i x [D] is independent of the orientation of the coordi nate axes. T h e inverse [D]'1
is called the receptance or compliance matrix. In
Acoustics of Underwater Structures
146
terms of the more familiar "engineering" constants, Young's modulus E} Poisson's ratio v and shear modulus G = E/2(l -f ^), the stiffness matrix elements are obtained by making use of the relations K3A + 2M)
p
-
E 2(1 + 1/)'
A = / (lI I +
A
) ; r o . , A + 2^, = / 1(lf g+- yi/)(l-2«/)" o.,•(«•»•»)
i/)(l-2i/)'
In some textbooks, the bulk modulus (hydrostatic pressure divided by de crease in volume per unit volume) and shear modulus are the basic pair. These can be interchanged with the standard pair E and v by using the conversion formulae _9G5_ (3B + GY
(3S-2G) 2(3£ + G ) '
E 3(1-2*/)'
E 2(1+ i/)"
l
'
Elastic constants can vary with pressure, temperature and time-harmonic frequency of excitation. Specialized textbooks, such as that of Kaye & Laby [3], should be consulted for recognized numerical values, but a rough guide to com monly used constants is given in Table 6.2, in which c\ — \/{(X -f 2fi)/p} and cs — \J(nlp) are the longitudinal and shear wave speeds in unbounded isotropic media. Hysteresis damping can be included in the constitutive matrix by setting the constants E, G, A and \i to complex values, viz. E = E(l — irj) etc. where rj is the hysteretic loss factor which ranges from 0.001 for lightly damped materials through 0.01 for moderately damped materials to values in excess of 0.1 for heavily damped materials. This assumes a time-harmonic response of exp(—iu;£); if the time-harmonic response is exp(-fiu;£), then E = E(l -f it}) etc. For "nonmathematical" solids it must be borne in mind that elastic constants and loss factors can vary in a complex way with temperature, pressure and frequency. Energy loss in a fluid may be simulated by a complex sound velocity, c = c(l—irj), where in this case the fluid loss factor is about twice the equivalent structural loss factor, because sound speed is proportional to the square root of the bulk modulus.
Elastic Equations
147
Table 6.2: Illustrative elastic constants and wave speeds in solids. Anechoic and decoupling are nominal materials for noise control and matrix is a nominal material for a sandwich construction filling.
| Material I Steel Aluminium Alum. Bronze Titanium Lead Brass Copper I Rock seabed Fast seabed Slow seabed Anechoic Decoupling Matrix Hard rubber Soft rubber Neoprene Polyurethane Polystyrene Polyester resin Perspex || Ice
E 0.195xl0 12 OJOOxlO11 O.lOOxlO12 0.115xl0 1 2 0.160xlO n O.lOOxlO12 0.120xl0 12 0.420xlO n 0.260xl0 0 9 0.260 xlO 0 9 0.600 xlO 0 8 0.260xl0 0 7 0.300xl0 1 0 0.200xl0 1 0 0.500xl0 0 7 0.360 xlO 0 9 0.200xl0 0 9 0.340xl0 1 0 0.350xl0 1 0 0.570xl0 1 0 0.621xl0 1 0
V
0.290 0.330 0.330 0.320 0.440 0.340 0.340 0.340 0.490 0.480 0.480 0.460 0.400 0.400 0.499 0.480 0.485 0.350 0.330 0.340 0.330
G 0.756xlO Xi 0.263xlO u 0.376xlO n 0.436xlO n 0.556xl0 10 0.373xlO n 0.448xlO n 0.157xlO u 0.872xl0 0 8 0.878 xlO 0 8 0.203 xlO 0 8 0.890 xlO 0 6 0.107xl0 10 0.714xlO° 9 0.167xlO° 7 0.122xl0 09 0.673 xlO 0 8 0.126xl0 10 0.132xl0 10 0.213xl0 10 0.233xl0 10
P 7700 2700 8300 4500 11300 8500 8800 2500 1400 1400 1600 800 1200 1100 950 1400 1100 1000 800 1200 910
Cl
5760 6200 4230 6050 2140 4260 4580 5090 1780 1280 574 123 2310 1970 938 1500 1450 2340 2550 2700 3180
cs 3130 3120 2130 3110 701 2100 2260 2500 250 250 113 33 945 806 42 295 247 1120 1280 1330 1600
||
i 1
|
Acoustics of Underwater Structures
148 6.6
Anisotropic Solid
A material is anisotropic if its properties measured at any fixed reference position are dependent on direction; see, for example, the glossary provided by Winterstein [4]. For a generally anisotropic solid, with stress and strain vectors
w
~
[&xx 5 &yy > &zz > ^yz » ^xz > TXy\
,
—
l^xx) tyy) €zz, lyz) Ixzt lxy\
—
\&rr j &(f>i &zz > T
—
\£rr ) €4>-> €zz 5 7^2 5 Jrz j Yr0J >
=
[&RR,0'e6,0',Te(f),TR(}„TRo]
> ,
,
(6.6.1) in which the subscript order of Auld [5] and Jones [6] is used, the constitutive stiffness matrix relation relating stress and strain as the matrix equation {a} —
[D]{c} is
I dn
<*12
C?13
di2
C?22
di3
G?23
di4
[D]
1 dis \ die
di4
dis
^23
^24
rf-25
C?26
G?33
^34
C?35
^36
^24
^34
C?44
d 45
c/46
^25
^35
C?45
^55
^56
<^36
d 46
<*56
^66
C?26
^16
\ (6.6.2)
y
This is a symmetric matrix with 21 unknown constants, whose values depend on the orientation of the coordinate axes. See the textbook of Auld [5] for discussion on the constants of constitutive matrices for various symmetries imposed by the microscopic structure of the material. A special case is the stiffness matrix for orthorhombic symmetry for which /
[D]
dn
di2
e?i3
d\2
dii
^23
di3
d-iz
^33
0 0 0
0 0 0
0 0
V 0
0 0 0 e/44
0 0
0 0 0 0
\ '
<^55
0 0 0 0 0
0
^66
/
(6.6.3)
This corresponds to the important engineering case of orthotropic material, for which there are nine unknown constants. If an isotropic material is reinforced
Elastic Equations
149
by periodically spaced fibres in directions parallel to all three axes, then for wavelengths large compared with fibre diameters and spacings, the material is orthotropic. The elements of the constitutive matrix are, see, for example, the textbook of Jones [6], dn
= ( 1 - VyzVzy)Exx/A,
di2 = (l/yar + VzxVyz)Exx
^13 = (Vzx + VyxVzy)Exx/A,
d22 = ( 1 ~
d23 = {Vzy + VxyVzx)Eyy/&,
d33 = ( 1 - VxyVyx)Ezz
d±4 = Gyz,
c/55 = Gzx,
dee —
/ A,
VxzVzx)Eyy/A, / A,
Gxy,
A = ( 1 - VXyVyX - VyZVZy ~ VZXVXZ ~ 2VyXVZyVXZ),
(6.6.4)
where Exx, Eyy and Ezz are Young's moduli in the local z, y, and z directions; Gyz = Gzy, G^a; = G ^ and G r y = Gyx are shear moduli in the local y — z, z — x and x — y planes; i/xy, vyX) vyz, vzy, vzx and vxz are Poisson's ratios which are related by the symmetry relations vxy/Exx
= VyXjEVy,
vxz/Exx
= VZXJEZZ,
vyzjEyy
— vzyjEzz.
(6.6.5)
The elements of the orthotropic stiffness matrix depend on the orientation of the axes, for which transformations are considered in Section 6.9. The inverse of the stiffness matrix is the receptance matrix defined by {e} — [-D]-1{cr}. Thus, /
l/Exx ~VyxlEyy rni-i -^x/Ezz L J ^ ~ 0 0 \ 0
-VyxlEyy I/Eyy -vzy/Ezz 0 0 0
-vzxjEzz ~VZy/EZZ \/Ezz 0 0 0
0 0 0 1/Gyz 0 0
0 0 0 0 \/Gzx 0
0 0 0 0 0 \/Gxy
\
)
The physical meaning of the various elastic constants is examined in textbooks on elasticity theory, see, for example, those of Jones [6] and Smith [7]. For other subscript orders, the corresponding [D] matrix is obtained by interchanging relevant rows and columns. For example, the subscript order (xx,yy,zz,xy,yz,zx) is perhaps more natural: in this case, replace row 4 by row 6, row 5 by row 4 and row 6 by row 5, the same procedure being necessary for columns. It must be borne in mind that no particular choice of subscript order should be expected.
Acoustics of Underwater Structures
150
Figure 6.2: Cross-section of m a t r i x material with periodically spaced fibre rein forcement in x direction only.
6.7
Unidirectional Fibre Reinforcement A local cartesian axes set (x, y, z) is shown in Figure 6.2. In this axes set an
isotropic material, called the matrix, occupies all space. T h e matrix is reinforced everywhere by periodically spaced thin fibres which are all parallel t o the x axis. T h e ("'engineering" elastic constants can be obtained from t h e micromechanics equations of Chamis [8], for this special case of unidirectional fibre reinforcement in an isotropic m a t r i x material. Let t h e known constants of the isotropic m a t r i x be Young's modulus Em, Poisson's ratio vm, shear modulus Gm = Em/2(l
+ vm) and density pm. Let the
known constants of the fibre material in local coordinates be Young's modulus in t h e fibre direction EfXXt Young's modulus perpendicular to t h e fibre direc tion Efyy, Gfyz,
shear modulus in x - y plane Gjxy,
shear modulus in y - z plane
Poisson's ratio i/fxy a n d density pf. Other (not needed) elastic constants
of the fibre are obtained as follows: Efzz
- EJyy,
the remaining five Poisson's ratios i/fyXy vjyz, lation i/fX2 = vjxy,
vjzy,
Gfzx
= GJxy)
i/fzx, vjxz
vjxz
=
vfxy-
require the re
t h e availability of i/jyz and use of the symmetry relations
given in Eq. (6.6.5). If the partial volumes of the m a t r i x and fibre are km and
Elastic Equations
151
Table 6.3: Effective material constants of carbon fibre reinforced plastic, E and G being in G P a .
1 */
■t-^xx
0.1 52.7 0.2 102.0 0.3 152.0 | 0.4 202.0
^"yy — ^zz
{-Jxy —
A.21 5.18 6.18 7.40
{Jzx
1.54 1.88 2.27 2.74
Gyz
Vxy — Vxz
Vyz
1.51 1.83 2.18 2.59
0.380 0.360 0.340 0.320
0.409 0.414 0.420 0.427
P II 1280 1360 1440 1520 |
kj, respectively, where km -f kj = 1, then according to Chamis [8], simplified micromechanics properties of the composite are as follows: &xx — kf&fxx
i
krn&mt
Eyy — EZZ = Em/ ( 1 — (1 — Em/Efyy)ykj\
,
GXy — Gxz — Gml ( 1 — (1 — Gm/GfXy)y/kf)
,
Gyz = Gml \l - (1 - Gm/Gfyz)yfkJ) Vxy — Vxz =: KfVfxy
Vyz = —14p = pjkf
,
T" ^m^rri)
Eyy/2Gyz, + Pmkm,
(6.7.1)
the other three Poisson's ratios being found from the symmetry relations of Eq. (6.6.5). For a numerical example, consider an isotropic plastic material with con stants given by the "matrix" material in Table 6.2. The plastic is reinforced with carbon fibre for which Ejxx vjxy
= 500.0, Ejyy
= 50.0, Gjxy
= 30.0, Gjyz
— 0.20 and pj = 2000, with E and G values being given in G P a .
= 15.0, Effec
tive elastic constants of the fibre reinforced material are shown in Table 6.3 for various fibre proportions, kj.
These elastic constants can be used to construct
the stiffness m a t r i x [D], given by Eq. (6.6.3), of the fibre reinforced composite material.
6.8
Thin Layered Composite T h e dynamics of a thin composite plate or shell can be represented by dif
ferential equations a n d / o r energy methods which contain stiffness constants Aij,
Acoustics of Underwater Structures
152
Figure 6.3: (a) Laminated composite comprising a stack of M thin fibre rein forced plates; and (b) definition of stacking angle relative to local (x,y) and global (xg,yg) axes. Bij and Dij, as described in later chapters. These constants can be obtained from simple formulae which are equally applicable to flat plates and curved shells. First, consider a laminated plate, comprising M thin layers, as shown in Figure 6.3. Each single layer comprises an isotropic matrix which is reinforced by unidirectional fibre reinforced material, with stacking angle £ relative to a global xg axis. The stacking angle can vary from layer to layer. In its local x — y plane a typical thin layer has "engineering" elastic constants Exx and Eyy the Young's moduli, Gxy the shear modulus, and i/xy and i/yx the Poisson's ratios which are related by the symmetry relation Exxjvxy — Eyyjvyx. These constants can be obtained from the simple mixture theory of Chamis, described in Section 6.7, provided the relevant elastic constants of the matrix and fibre materials are known. In the local (z, y) axes set, the stiffness matrix of a layer is defined by the standard plane stress matrix equation Qn Q12
Q12 Q22
0
0
0 0
\
/ \ [
Q66 / \
ex cy lxy
\ ,
)
(6.8.1)
Elastic Equations
153
where Q l l = EXX/{\ Ql2 = EXXVyx/(\ In the global {xg,yg,zg)
- VXyVyX),
Q22 = Eyy/(1 ~ VXyVyx),
~ VXyVyX),
Q QQ = GXy .
(6.8.2)
axes set, the stacking angle £ is defined by a right-
h a n d screw rotation of the global xg axis, about the global zg axis, until it is coincident with the local x axis. In the global axes set, the matrix relation is, see, for example, Jones [6], Qgll Qgl2 Qgl6
> gx T gy 1
gxy
Qgl2 Qg22 Qg26
Qgl6 Qg26 Qg66
z
gx gy Jgxy
(6.8.3)
e
where Qgll
Qu cos 4 £ + 2 ( 9 i 2 + 2 Q 6 6 ) sin 2 £ cos 2 £ + Q22 sin 4 £,
Qgi2
(Qu + Q22 - 4Q 6 6) sin 2 £ cos 2 £ + Q i 2 ( s i n 4 £ + cos 4 £),
Qgl6
(Q11 - Q12 - 2Q 6 6) sin£ cos 3 £ + (Q12 - Q22 + 2Q 6 6 ) sin 3 £ cos£,
Qg22
Q n sin 4 £ + 2(Qi2 + 2Q 6 e) sin 2 £ cos 2 £ + Q 2 2 cos 4 £,
Qg26
( Q u - Q12 - 2 g 6 e ) sin 3 £ cos£ + ( Q 1 2 - Q 2 2 + 2Q 6 e) sin^ cos 3 £,
Qg66
(Q11 + Q22 - 2 Q i 2 - 2Q6e) s i n 2 £ cos 2 £ + Q 6 6(sin 4 £ + cos 4 f ) . (6.8.4)
For the M layered stack of fibre reinforced layers, the constants A{j, and Dij, i,j
Bij
= 1,2,6, comprise the elements of the 6 x 6 constitutive m a t r i x
[Dg], relating stress and m o m e n t resultants to midsurface strains in the global (xg,yg,zg)
axes set. T h e m a t r i x relation, {
for a thin layered
composite is defined by the symmetric m a t r i x relation /
Nqx
\
(
gy gxy M,gx Magy
\
MgXy
\
An A12 A16
A12
Aie
flu
B\2
5l6
A22 A2Q
A2e A6e
B\2
B22 B26
B26 Be6
B11 B12
B\2 B22 B26
Bi6 B26
D12
D16 D2e Dee j
B16
Bee
Here, (NgX} Ngy, Ngxy, Mgx, Mgy,Mgxy) ment resultants, and {tgx,£gy,lgxy,
B\e Dn D12 Die
D22
A>6
\
(
e
gx
e
\
gy
Jgxy
(6.8.5)
K>gx K
\
T
gy
gxy
/
comprises the vector of stresses and mo Kgx,Kgy,Tgxx)
comprises the vector of mid-
surface strains, changes in curvature and twist, see, for example, reference [6].
154
Acoustics of Underwater Structures
Table 6.4: Stiffness values of layered composite.
| Subscript i,i 1,2 1,6 2,2 2,6
1
6,6
D 0.536 x 106 0.370 x 105 0.282 x 105 0.536 x 106 0.282 x 105 0.389 x 105
B 0.342 x 108 0.864 x 10"3 0.211 x 107 -0.342 x 108 -0.211 x 10 7 0.864 x 10-3
0.347 0.824 0.846 0.347 0.846 0.839
A | x 101U x 109 x 109 x 1010 x 109 x 109 [
T h e stiffness constants, comprising the m a t r i x [Dg]> and the effective density are obtained by s u m m i n g the layer constants as follows: M
1
Aij = /^V'rn —tm-l)Qgij m=l M V ~ 'X 2—<^
m
>
^m-l)Qgij J
&ij
=
M
9 Z - / ^ m ~^m-l)Qgij m=l 1
1
M
Ps = -^^2(tm-tm-i)p(m),
(6.8.6)
m=l where tm — zm — zc with zm and z m _ i being the z coordinates of the upper and lower surfaces of the m t h layer; zc is the z coordinate of the laminate's midsurface usually taken as zc = (ZM + ZQ)/2\ laminate; p is layer density.
h is the total thickness of the
T h e stiffness A{j values are related t o in-plane
stretching of the midsurface; the D{j values to bending of the surface; the Bij values t o coupling between bending and stretching.
When the lamination is
symmetric with respect t o the midsurface, the B{j values are zero. For a numerical example, a thin laminated composite comprising four layers of carbon fibre reinforced plastic is considered for which constants are obtained from Table 6.3 for kf = 0.4. T h e thickness of each layer is h = 0.01 and stacking angles, t o p layer to b o t t o m , are £ = [0,30,60,90]. T h e effective stiffness constants are given in Table 6.4. For a thin layered axisymmetric shell, t h e m a t r i x relation, {ag} = [jD^]{e^},
Elastic Equations
155
is defined in cylindrical coordinates as /
N8 + N9S
\
( Mi Ml
A\2 Ml
Ms M§
A\§
^26
^66
#16
#26
#66
Jg4>s
#11
#12
#16
£>11
^12
^16
Kg
#12
#22
#26
£*12
^22
^26
#16
#26
#66
#16
#26
#66
N94>s Mg(f> Mgs
\
M
9* J
\
#11 #12
B\2 #22
Bie #26
\ /
€
9 \
(6.8.7)
Kgs /
\
T
94>* )
where s is distance along the cylinder generator, <j> is the angle around the cylinder in a direction defined so t h a t (r, <j),s) is a right-handed axes set in which the positive direction of r is outward. Thus, for a cylinder, identify the cylindrical ((f), s) directions with the cartesian (x,y)
directions in Eq. (6.8.1)
to Eq. (6.8.6). T h e stacking angle £ (or fibre winding angle) is a rotation of the <j) direction until it is aligned with the fibre direction. For circumferentially reinforced material £ = 0, and for axially reinforced material £ = 90°.
6.9
Local t o Global Transformation In Figure 6.4 are shown local, ( x , y , z), and global, (xg,yg,
zg),
coordinate
systems which are rotated with respect to one another. The elements of the generally anisotropic stiffness constitutive matrix, Eq. (6.6.2), in the local coor dinate system are assumed known. For the orthotropic case, for example, they could be found from the Chamis formulae of Section 6.7, for unidirectional fibre reinforcement in the x direction. Also note t h a t stress and strain order in the stiffness relation, {a} — [#]{e}, are assumed here as \0J \CJ
— —
[&xxi &yy j &zzi Tyz t ^zxi \€xx,
e
yyi
e
zzi
lyz-> Jzx,
TryJ > Jxyj
>
(6.9.1)
which is the s t a n d a r d subscript ordering. T h e transformation of the stiffness m a t r i x [D] from the local coordinate system (x, y, z) to a global coordinate system (xg,ygjzg)
is obtained by a minor
modification to the equations of Auld [5] as [D9] =
[N]T[D][N],
(6.9.2)
Acoustics of Underwater Structures
156
Figure 6.4: Local (x,y,z) where
and global (xg,yg,zg)
( Nn
cartesian coordinates.
N12
N13
N14
JV 15 N16
N2i N31 NA1 N51
N22 N32 NA2 N52
N23 N33 NA3 N53
N2A
N34 NAA N54
N25 N35 N45 AT55
N2e N36 NA6 N56
\ Nei
N62
NQ3 Net
iV 65
N6e J
[N] =
\ (6.9.3)
with N12 = aly,
Nil = «£*, iVi4 =
#21 = ^24
N15 =
Q>xyQ>xz j
#22 = aJ y ,
fly*,
N25 =
= yyyz>
N
3l =
N34 = N41 = a
yy zz
N51 =
a
azyazz,
2azxaXXy
N16 =
Q'xxQ'xy)
N2s =
a
N2e =
CLyxO-yy,
2
yz>
N33
o,zzazx,
N36
= -
N43
-
J,<2yZQ,ZZ
,
= Clyx zz ~r fly^^a?*
N*e -
Q>yyQ>Zx
1 QyxQ'Zy
iV 52 =
AT53 =
LQ,ZZ(XXZ,
N42 —
N4s
<4>
a22y)
N35 =
2ayxaZX) H~ Q>yz zy<>
Uyzdyx,
N32 =
L,
a
axzaxx,
N13 =
a
a
% yy zyi
a
2azyaxy,
«L. a
zxazy
j
y
Elastic Equations
N54 = o-xydzz + o,xzazy,
157
7V55 = axzazx
Nei — 2axxayx, NQ4 — axyayz
+ axzayy,
-f axxazz,
N62 — 2axyayy, Ne$ = axzayx
+ axxayZ}
JV56 = axxazy 7V63 =
-f
axyazx,
2axzayZi
NQQ = axxayy
+
axyayx.
(6.9.4) T h e constants a^- are found from the direction cosine m a t r i x [A] relating the local {x} and global {xg}
axes sets by the 3 x 3 m a t r i x relation {x} =
[A]{xg},
where the element a^ is the cosine of the angle between local axis i and global axis j . Several m e t h o d s have been proposed for determining the m a t r i x [A], two of these being presented below. They should suffice for most practical problems in which there is unidirectional fibre reinforcement along the local x axis; if the first m e t h o d of determining the directional cosines appears to be unduly difficult, then the second m e t h o d should be tried. T h e first m e t h o d of calculating the m a t r i x elements a^ is called the "three axes rotation angles" m e t h o d . Make coincident the global axes and the local axes by applying these consecutive rotations, in the sense of a right-hand-screw, t o t h e global axes set: \p about the global x axis; 6 about the new global y axis; about the new global z axis. T h e product rule of successive transformations gives the direction cosine m a t r i x as cos# cos> cos\p sin<j)-\-smtp sin0 cos<j) simp siiuf) — cosip sin# cos cost/>cos^>—sin^ sin# sin^ sin?/>cos>+cosi/>sin0sin<£ I . sin# — simp cos# cost/> cos# /
(6.9.5) T h e second m e t h o d of calculating the m a t r i x elements a^ is called the "Euler rotation angles" m e t h o d . Make coincident the global axes and the local axes by applying these consecutive rotations, in the sense of a right-hand-screw, to the global axes set: ip about the global z axis; 0 about the new global x axis;
f
cos^ cosip —sincp simp cos9 - sin<£ cos ip — cos^ sin ip cos9 sin# simp
cos> s i n ^ + s i n ^ cosip cos# sin# sin>> — sin<£ sin^+cos^> cos^ cos0 sin# cos<^> — sin# cosip cosO
W h e n the stress and strain subscript order differs from
(6.9.6) (xx,yy,zz,yz,xz,xy)
then rows and columns of the m a t r i x [Dg] must be interchanged. For example,
158
1i 1 1 1 1 1 1 2 2 2 2 [2
Acoustics of Underwater Structures
Table 6.5: Stiffness dij Local 3 1 0.205 x 101* 2 0.418 x 1010 10 3 0.418 x 10 4 0.000 5 0.000 6 0.000 2 0.914 x 10 10 3 0.395 x 1010 4 0.000 5 0.000 6 0.000
constants in local and global coordinate systems. dij Global || dij Local d^ Global | i j 0.473 x 10 11 \J~ 3 0.914 x 10iU 0.923 x 10iU -0.448 x 109 0.504 x 10 11 3 4 0.000 -0.403 x 109 0.574 x 10 10 3 5 0.000 10 0.197 x 1010 -0.884 x 10 3 6 0.000 10 10 0.474 x 1010 4 4 0.259 x 10 -0.800 x 10 0.193 x 1010 0.420 x 10 11 4 5 0.000 11 -0.978 x 1010 4 6 0.000 0.665 x 10 10 10 0.434 x 1010 5 5 0.274 x 10 0.614 x 10 u -0.883 x 1010 , -0.109 x 1 0 5 6 0.000 10 10 0.490 x 10 11 -0.979 x 10 6 6 0.274 x 10 11 0.515 x 10
if the subscript order is (xx,yy,zz,xy,yz,zx) then row 4 must be replaced by row 6, row 5 by row 4, and row 6 by row 5, and similarly for the columns. For a numerical example, a composite comprising carbon fibre reinforced plastic with unidirectional reinforcement parallel to the local x axis is considered. In the local axes set, material constants are obtained from Table 6.3 for kf = 0.4. The "three axes rotation angles" method, with angles (ip, 0, ) — (40°, 50°, 60°), is used to find direction cosines. In Table 6.5 are given the elements of the local and global stiffness matrices, [D] and [Dg]. The transformation for axisymmetric solids is conceptually more involved. Let the subscript order in cylindrical coordinates be {a}
{(}
=
=
[(TrriVctxpiVzziT^ZTTrzTTrf]
, T
[err,^0,^2,7^,7r2,7r0] .
(6.9.7)
The aforementioned transformations can be used provided the cartesian direc tions {x,y,z) are identified with the cylindrical directions (r,,z). An alternative procedure may be desirable. Identify the (r, >, z) local cylin drical coordinates with cartesian (z,x,y) local coordinates. The local stiffness matrix [D] for unidirectional fibre reinforcement in the x direction is obtained by using the Chamis formulae of Section 6.7 with the standard subscript order (xx,yy,zz,yz,zx,xy). This corresponds to a local stiffness matrix in cylindri cal coordinates with a non-standard subscript order of ((jxf), zz, rr, zr, r<j),<j)z),
Elastic Equations
159
the fibre reinforcement being in the circumferential direction. Proceeding gen erally, for the three axes rotation angles method, make coincident the global axes and the local axes by applying these consecutive rotations, in the sense of a right-hand-screw, to the global axes set: ^o about the global <j> axis; #o about the new global z axis; <j>o about the new global r axis. For the Euler rotation angles method, make coincident the global axes and the local axes by applying these consecutive rotations, in the sense of a right-hand-screw, to the global axes set: tpo about the global r axis; #o about the new global <j) axis; <))Q about the new global r axis. Interchanges to rows and columns of [Dg] must be m a d e when the required subscript order of the global stiffness m a t r i x is not (>), zz, rr, zr, r # , <\>z).
6.10
Effective C o n s t a n t s of S y m m e t r i c Stack
For the laminated composite shown in Figure 6.3, it is frequently desirable to derive effective elastic constants of the equivalent homogeneous layer whose total thickness is h — ZM — *o • Formulae for predicting the constants of a symmetric stack have been given by Sun &; Li [9] and adapted by Lin [10]. When certain modifications have been m a d e , the three-dimensional stiffness values, see formula for [D] in Section 6.6 for definitions, are obtained as M
dij
=
y^hkdkjj,
ij
= 1,2,6,
fc=i M
^33 =
l/yjfrfc/dfc33, Jfe =
l
M d\7<
=
-
/
M J
Jb = l
M
d2s <*36
=
=
2
hkdki3 + d33 2_^ fc
hkdki3/dk33
= l M
/ , hkdk23 + ds3 2_^ hkdk23/dk33 Jk = l
Jb = l
M
M
2 I / , hkdk36 + dss 2_^, hkdk36/dk33 .Jb = l
Jfc =
l
M
dij
=
2j/ijfcC?jbij/AAfc, i,j = 4 , 5 , fc=i
Acoustics of Underwater Structures
160
Table 6.6: Effective stiffness constants d^ = dji of an 8 layer CFRP stack. 11 i
1i dij 0.826 x 10 11 \T 1 3 0.406 x 10 10 1 5 0.0 2 0.826 x 10 11 2 4 2 0.0 6 0.0 3 0.0 4 3 6 0.0 4 5 4 0.0 5 0.266 x 1010 5 i 6_ 0.271 x 10 11 |
3
ri1 r 1 2 2 2 3
3 4 5 ]_6
A A&
= —
i 2 4 6 3 5 3 5 4 6 6
dij
1
0.285 x 10 11 0.0 0.0 0.406 x 1010 0.0 0.914 x 1010 0.0 0.266 x 10 10 0.0 0.0
M
M
M
y^hkd^/Ak
/.hkdkttl&k
/,hkdk45/Ak
Jk=l fc=i C?Ar44^fc55 — ^ 4 5 ^ 4 5 ,
Jb=i
(6.10.1)
other d^ stiffness values being identically zero. Here, d^ = dji are the effective stiffness constants of the stack treated as a homogeneous layer of thickness h\ dkij are the stiffness constants of the fcth layer, which are obtained by using the definitions in Section 6.6, followed by the transformation given in Section 6.9 with Euler angles (tf>,0 = 0 > = 0) where > is the stacking angle; hk = (zk zk-i)/h is the fractional thickness of the fcth layer. The formulae, in part, reflect various additions in series and in parallel of the stiffness constants of the component layers. The formulae are valid for wavelengths greater than the total thickness of the stack. Numerical predictions of sound radiation (not described here) from planar layered media have demonstrated that, for the purposes of sound radiation at least, the formulae are accurate. For a numerical example, a composite comprising eight layers of carbon fibre reinforced plastic with unidirectional fibre reinforcement and stacking angles, top to bottom, £ = [0,90,45,-45,-45,45,90,0], is considered. In the local axes set, material constants are obtained from Table 6.3 for kf = 0.4. The thickness of each layer is 0.001. The effective stiffness constants of this symmetric and balanced stack are given in Table 6.6. The stiffness matrix is that of an orthotropic solid. By symmetric is meant that the top half of the stack is a
Elastic Equations
161
mirror image of the bottom half. By balanced is meant that for every 45° stacking angle there is a —45° stacking angle. Smith's textbook [7] provides an excellent introduction to the theory and usage of fibre reinforced composites. The above analysis is valid for a subscript order \&f
=
l&xxi &yy ? &zzj TyZ, Txz, TXy\
\€j
=
[€Xx) €yy> ^zzt Kyz, 7xzi Jxy\
, •
(u.10.2)
For other subscript orders it is necessary to interchange appropriate rows and columns. References and Additional Reading
1. H.P.W. Gottlieb, On the general solution of the vector Helmholtz equa tion in cylindrical polar coordinates, Journal of the Acoustical Society of America 81(5) (1987) pages 1628-1629. 2. O.C. Zienkiewicz, The Finite Element Method in Engineering Science, (McGraw-Hill, London, 1971). 3. G.W.C. Kaye and T.H. Laby, Tables of Physical and Chemical Con stants, (15th Edition, London: Longman, 1986). 4. D.F. Winterstein, Velocity anisotropy terminology for geophysicists, Geophysics 55(8) (August 1990) pages 1070-1088. 5. B.A. Auld, Acoustic Fields and Waves in Solids, Volume 1, (New York: Wiley-Interscience, 1973). 6. R.M. Jones, Mechanics of Composite Materials, (New York: Hemi sphere, 1975). 7. C.S. Smith, Design of Marine Structures in Composite Materials, (Lon don: Elsevier, 1990). 8. C.C. Chamis, Simplified composite micromechanics equations for hygral, thermal and mechanical properties, SAMPE Quarterly 15 (1984) pages 14-23. 9. C.T. Sun and S. Li, Three-dimensional effective elastic constants for thick laminates, Journal of Composite Materials 22 (1988) pages 629638. 10. G. Lin, Comparative stress/deflection analyses of a thick-shell composite
Acoustics of Underwater Structures
162
propeller blade, (David Taylor Research Centre, Bethesda, D T R C / S H D 1373-01, 1991). 11. W . M . Lai et al., Introduction
to Continuum
Mechanics,
(third edition,
Pergamon Press, Oxford, 1993). 12. C. Wang, Applied Elasticity,
(McGraw-Hill, New York, 1953).
13. J.A. Hudson, The Excitation
and Propagation
bridge University Press, Cambridge, 1987).
of Elastic
Waves, (Cam
CHAPTER 7. ACOUSTICS OF SPHERICAL SHELL
7.1
Equations of Motion
The spherical shell is the only finite geometry for which closed form analyt ical expressions are available for its vibration, sound radiation and scattering. It has been studied extensively, because in addition to being a useful bench mark problem for purely numerical formulations, its simplicity makes possible a straightforward physical interpretation of the equations, see, for example, the textbook of Junger & Feit [1]. The equations of motion given by these authors, for axisymmetric vibrations with transverse shear and rotatory inertia terms neglected, are re-arranged as
+Erf2 cot e
^
-
El
((1 + u) + 02(u + cot2 8)) ^
~E^d-W ~2E^cot*7JF
+ El ((1 +
")(1 + ^
+ psh^+
-Ei cot 0 ((2 - v + cot 2 0)/?2 _ (1 + „ ) ) „ , + Erf2 ^ -E1l32(l
+ V + cot2e)^
+ Erf2cot9(2-u
+2E1(l + u)uR + P
a
h ^ = S R,
= S,,
?cot29) W + 1Erf2 cot 6 ^ -
+
cot2e)^(7.1.1)
where u$ and UR are tangential and radial displacements, the circumferential displacement u$ vanishing; (32 — /i 2 /12a 2 , where h is the shell's thickness and a is its mean radius; E\ = Eh/a2(l — z/2), where E is Young's modulus and v is Poisson's ratio; ps is the shell's density. The excitations SR and S$ are the 163
Acoustics of Underwater Structures
164
Figure 7.1: Spherical shell excited by point force, monopole and plane wave. The problem is axisymmetric. surface tractions SH = * R - p ( M ) + p i ( M ) , (7.1.2)
Sg — F9,
where FR and Fe are the mechanical tractions, and p(R,9) and pi(R,6) are external and internal fluid pressures. The geometry is shown in Figure 7.1. The equations can be simplified considerably by expanding field quantities as Legendre series, with argument [i — cos#, viz. u
Rie)
= ^u#nPn(cos0),
ue{9) -
n=0 oo
p(R, 9) = £)> n (fl)P n (cos 9), n=0 oo F
*(0)
= ^^HnPn(cOS^), n=0
y^tXflnsinflP^(cosfl), n=0 oo
Pl(R,
9) = Jj> l n (fl)P„(cos 9), n=0 oo
F$(0) = £ > , n=0
n
SITLflP^COS0),
(7.1.3)
Spherical Shell
165
giving the m a t r i x equation, for time-harmonic motion, ai2 \ f u0n \ ( Sen a 2 2 ) { u R n ) = {sRn)>
( an [a21
\
/^ i A\ (71-4)
where a n = # i ( l + f32)(v + An - 1) - w 2 p . A, a 1 2 = Ex02{y
+ A„ - 1) + £ i ( l + i/), a2i = A n ai2,
2
a 2 2 = E1f3 \n(is
+ Xn - 1) + 2 £ i ( l + i/) -
S0n = Fon,
u2psh,
SRn = FRU - pn+pln,
(7.1.5)
where Xn = n ( n + 1). T h e amplitudes w^n and URn are spectral displacements, pn{R)
and p i n ( i £ ) are spectral pressures, and FRn,Fon
are spectral mechanical
excitations. T h e determinant of this m a t r i x equation is a quadratic in a;2 from which the in-vacuo natural frequencies can be found. For n = 0, the "breathing" mode, there is only one frequency; for n > 1 there are two frequencies, the lower frequency generally being associated with predominantly radial motion and the higher frequency with in-plane motion.
7.2
Mechanical Excitation A radial mechanical point force, located at 0 = 0, and its spectral coeffi
cients, obtained from Eq. (1.8.8), comprise the transform pair FR(0) = Fo6(O)/2ica2 sin 0, FRn = (2n+l)F0/47ra2,
(7.2.1)
where Fo is the amplitude of the point force. An alternative excitation, not used herein, is the external stress which has a constant value So over the axisymmetric region defined by the limits 6 = (0, a) and <j) = (0, 27r), in which case FRn = ( S o / 2 ) ( P n _ i ( c o s a ) - P n + 1 ( c o s a ) ) .
(7.2.2)
T h e interior pressure must be a solution of the reduced wave equation which is finite at the origin. Thus, oo Pl(R,6)
= ^2alnjn(kiR)Pn(coBe), n=0
(7.2.3)
Acoustics of Underwater Structures
166
where ki = CJ/CI and c\ is the interior fluid sound speed. Applying the boundary condition Jl^p^uRiO), atfl = a,
(7.2.4)
where pi is the interior fluid density, allows the interior pressure to be written as oo
Pi(R, 0) = PICHJ J2 (3n(kiR)/¥n(kia))
uRnPn(cos6).
(7.2.5)
n=0
T h e exterior pressure must be a solution of the reduced wave equation which satisfies the radiation condition, Eq. (3.3.2). T h u s , oo
n (cos
0),
(7.2.6)
n=0
where k = u/c
and c is the exterior fluid sound speed. Applying the boundary
condition -^
= pu;2uR(0)^t
R = a,
(7.2.7)
where p is the exterior fluid density, allows the exterior pressure to be written as oo
p(R, 0) = pen ^
{hn(kR)/Wn(ka))
uRnPn(cos
0).
(7.2.8)
n=0
T h e spectral excitations are obtained from Eq. (7.1.5) as S$n — Fen = 0, SRn
= FRn - pn(a) + pin (a),
= (2n + l)F 0 /4™ 2 - w ( p c ^ \ - P i c ^ ^ J ) tij*.
(7.2.9)
Substituting these excitations into Eq. (7.1.4), and moving the terms involving v>Rn to the left hand side, gives
all where
a 2 2 + / , ) { uRn )
=
(, (2n + l)F 0 /47ra 2 J '
(7
'210)
Spherical Shell
167
Figure 7.2: Real part of exterior water loading, normalized by pcu, on a spherical shell of radius 1 m. The negative sign indicates that it acts as a mass. comprises the fluid loading of the external and internal fluids. The complex exterior fluid loading term has the effect of an added mass and resistance at all frequencies, while the real valued interior fluid loading term is either a stiffness or a mass, depending on frequency. Normalized fluid loading terms of a shell of radius 1 m, in water, are shown in Figures 7.2 to 7.4. The interior fluid loading terms swing through ±oo at the roots oi}'n{k\a) — 0, the hard boundary condition, and vanish at the roots oi]n(k\a) = 0, the soft boundary condition. For comparison purposes, it is noted that the normalized shell inertia term w2psh/pcu> is 0.16 at 500 Hz when its thickness is h — 0.01 m, which means that in this case fluid mass loading terms generally dominate. Eq. (7.2.10) can be solved numerically for the spectral displacements uon and v,Rn, actual shell displacements being obtained from Eq. (7.1.3). Interior and exterior fluid pressures, pi(R, 6) and p(R, 0), are calculated from Eq. (7.2.5) and Eq. (7.2.8). In the acoustic far field the exterior pressure is obtained by replacing the spherical Hankel function hn(kR) by its value for a large argument, as in
168
Acoustics of Underwater Structures
Figure 7.3: Imaginary part of exterior water loading, normalized by pcto, on a spherical shell of radius 1 m. The negative sign indicates that it acts as a resistance.
Figure 7.4: Real part of interior water loading, normalized by piciu;, on a spher ical shell of radius 1 m. The oscillations between ±oo indicate that it acts as a stiffness or a mass depending on the frequency. The imaginary part is identically zero so there is no resistive term.
Spherical Shell
169
Figure 7.5: Far field sound level of an empty steel spherical shell submerged in water. The excitation is a unit point force located at 0 = 0°, and the observation point is also at 6 = 0°. The reference plot is for a point force in water. Levels are in dB reference 1 micropascal at 1 m.
170
Acoustics of Underwater Structures
Figure 7.6: Far field sound pressure, in millipascals reference 1 m, of an empty steel spherical shell submerged in water. T h e time scale, in milliseconds, has an arbitrary origin. T h e excitation is a point force of unit amplitude whose time variation is a 300 Hz sine wave on for 1 cycle.
Spherical Shell
171
Eq. (4.2.7), giving pf(R,6)
= PC"eM^R)
£
((-i) n + Vh;(Ara))
U f i n P„(cos0).
(7.2.12)
n=0
For a numerical example, an empty steel shell surrounded by water is con sidered; the shell constants are radius 1 m, thickness 0.01 m and loss factor 77 = 0.01. The excitation is a unit point force located at 6 — 0°, and the obser vation point is also at 0 = 0°. In Figure 7.5 is shown the far field sound level for time-harmonic excitation. The sound level, in dB reference 1 micropascal at 1 m, is defined as 201og10 \p(R= 1, 0 = O)| 4- 120. In the frequency range 200-500 Hz, there are prominent resonances; elsewhere the sound level is about 6 dB above the reference plot of a point force in water, which is to be expected because a point force normal to a fluid-vacuum interface doubles its free field pressure. In Figure 7.6 is shown the far field pressure trace when the excitation is a unit force comprising a 300 Hz sine wave on for 1 cycle; following the initial response, whose shape resembles the excitation, there is extended ringing stemming from the resonances shown in the time-harmonic spectrum. 7.3
Acoustical E x c i t a t i o n
For the specific case of a plane wave incident along the z axis in the direction of increasing 2, as shown Figure 7.1, the total pressure exterior to the shell is decomposed as P(R, 0) = Pi{R, 0) + pr(R, 0) + p 6 (iJ, 0),
(7.3.1)
where p 8 , the incident pressure, is given by Eq. (4.2.1) as 00
Pi(iJ,fl) = 5^Pi„P„(c08fl) n=0 00
= i 4 £ i n ( 2 i » + l)j n ObiJ)P n (cos0),
(7.3.2)
and p r , the pressure scattered as though the shell were hard, is given by Eq. (4.2.5) as 00
p r n P n (cos0) n=0
Acoustics of Underwater Structures
172
= -A J^ i " ( 2 " + 1) Gn(*<0/K(*<0) K(kR)Pn{cos
6).
(7.3.3)
n=0
The interior pressure p\(R,0) and the exterior pressure pe(Ry9) Eq. (7.2.5) and Eq. (7.2.8), viz. Pi(R,0)
= PiCiw^QnikxRyy^kxa^URnPnicose),
are given by
(7.3.4)
n=0 oo
pe(R,0)
= pca;5^(h n (t/Z)/h;(ta))tifl n P n (cosff).
(7.3.5)
n=0
The acoustic boundary condition
is satisfied by the decomposition of Eq. (7.3.1), because d{pi -\-pr)/dR vanishes on the boundary R = a, by definition, and dpe/dR satisfies the remaining part of the boundary condition. The interior pressure of Eq. (7.3.4) satisfies the boundary condition Piu2uR(0), at R=a. (7.3.7) OR The equations of motion of the spectral displacements are given by Eq. (7.1.4) and Eq. (7.1.5), without mechanical excitation, as ( an V a21
a i 2 \ / u9n \ ^22+//
J \
URn J
/ \
0
\
- (pin(a) + Pm(a)) J '
K
' ' '
where (p t n (a) -f prn(a)) is the sum of the spectral amplitudes of the incident and hard boundary pressures, evaluated on the boundary, R — a. This "blocked" pressure is given by Eq. (4.2.6) as A
KnOO + l V n O O - p ^
in+1(2n+l)
^
^ '■
(7.3.9)
Eq. (7.3.8) can be solved numerically for the spectral displacements uen and URU, the actual shell displacements being obtained from Eq. (7.1.3). Interior and exterior fluid pressures, p\(R, 6) and p(R, 0), are calculated from Eq. (7.3.4) and Eq. (7.3.1).
Spherical Shell
173
In the acoustic far field, the spherical Hankel function, hn(kR), by its value for a large argument, as in Eq. (4.2.7), giving Prf(R, 9) =
iAexp(ikR) - g — I £ ( 2 n + 1) (j'n(ka)/h'n(ka))
is replaced
P n (cos0),
(7.3.10)
n=0
and pef(R,6)
= pcu>?^j£Q
£
((-i)»+Vh;(iba))
«K„P„(COS0),
(7.3.11)
n=0
which are spherically spreading waves. The far field scattered pressure is defined as p8f(R, 9) = prf{R, 9) + pef(R, 9). (7.3.12) The back-scattered pressure is obtained by setting 9 — 180°, for which P n (cos#) = The procedure for solving this scattering problem is thus precisely the same as that for solving the acoustic radiation problem, provided the exterior pressure decomposition is given by Eq. (7.3.1), and the excitation is the "blocked" pres sure spectral amplitude, sign changed to reflect opposite directions for positive pressure and stress excitation. This method of solving scattering problems is adopted throughout this book. When the excitation is an exterior monopole, located at coordinates (R0,9 = 0,0), the total pressure is again of the form p(iJ, 9) = Pi(R, 9) + Pr(R, 9) + pe(R, 9),
(7.3.13)
where (T> r> \ Pi(TL,
. exp(i*|R-Ro|)
Ro) = A
,
R
_
R
.
(7*-\A\
,
(7.3.14)
with |R — R 0 | = y/(R2 + #o "~ 2 # # o c o s #) > *s t n e ^ r e e ^ e ^ pressure of the monopole which is given by Eq. (3.5.10) as / D />\
Pi(R,9)
•/ A V V o . I \ D i = ikAj2(2n+l)rn(cos9)l
m / ln(kRo)hn(kR), for R0 < R. j n t i J ) k ( U > ) , foTR
, ( Q (7-3-15)
The pressure scattered by a hard boundary is given by Eq. (4.2.14) as CO
-ikAj2(2n+l)(i'n(ka)K(kRo)/K(ka))K(kR)Pn(coS0),
Pr(R,$) = n=0
(7.3.16)
Acoustics of Underwater Structures
174
and on the surface itself the sign changed "blocked" spectral pressure is obtained from Eq. (4.2.15) as - (Pin(a) +Prn(a))
= —2
j
^
.
(7.3.17)
Following the procedure for plane wave excitation, the interior, and exterior, pe(RJ0)^
pi(R,9),
pressures due to motion of the shell are again given by
Eq. (7.3.4) and Eq. (7.3.5), and the spectral displacements are obtained from Eq. (7.3.8), in which the sign changed "blocked" pressure is given by Eq. (7.3.17). Eq. (7.3.8) can be solved numerically for the spectral displacements ugn and URn}
the actual shell displacements being obtained from Eq. (7.1.3). Interior
and exterior fluid pressures, pi(R, 0) and p(R, #), are calculated from Eq. (7.3.4) and Eq. (7.3.13). In the acoustic far field, the spherical Hankel function, hn(kR),
is replaced
by its value for a large argument, giving Prf(R,0)
= _Aex^lkR)
f2(-i)n(2n+l)(i'n(ka)K(kR0)/h'n(ka))Pn(coSe), n=0
(7.3.18) and Pef(R,
9) = PcueXP^R)
f;
((-i)n+1/K(ka))
u*„P„(cos0),
(7.3.19)
n=0
which are spherically spreading waves. The far field scattered pressure is defined p8f(R,
0) = prf(R,
6) +
Pef{R,
0).
(7.3.20)
T h e total pressure in the far field is
Pf(R,e) = Pif(R,e)+Prf(R,o)
+ PeAR>e)>
(7.3.21)
where the far field pressure of the monopole, PiS{R,6)
= A^^—^exp(-iArJR0cos<9),
(7.3.22)
is obtained from Eq. (4.2.17). For a numerical example, an empty steel shell surrounded by water and ensonified by a plane wave is considered; the shell's constants are given in the
Spherical Shell
175
Figure 7.7: Monostatic target strength in water of an empty steel spherical shell ensonified by a plane wave. The reference plots are the monostatic target strengths of hard and soft spheres.
Figure 7.8: Far field back-scattered sound pressure, in millipascals reference 1 m, of an empty steel spherical shell in water. The time scale, in milliseconds, has an arbitrary origin. The excitation is a plane wave of unit amplitude whose time variation is a 300 Hz sine wave on for 1 cycle.
Acoustics of Underwater Structures
176
previous section. In Figure 7.7 are shown monostatic target strengths of the elastic shell and spheres with hard and soft boundaries. The target strength is defined as 20 x log 10 \psf(R = 1, 0)/A\ for the incident plane wave excitation; for the monostatic case, for which source and receiver are at the same location, 9 — 0i = 180°. The target strength spectrum of the elastic shell has two prominent resonances in the frequency regime 200-400 Hz. Above 200 Hz, target strength levels of the hard and soft spheres are much the same; at lower frequencies the target strength level of the hard sphere drops rapidly while the target strength level of the soft sphere gradually rises to 0 dB. In Figure 7.8 is shown the far field back-scattered pressure trace, of the steel shell, when the plane wave excitation is a 300 Hz sine wave on for 1 cycle. The early pressure response has an opposite polarity to the excitation, which is likely to be due to the shell acting initially as a soft boundary; there follows extended ringing stemming from the resonances, shown in the time-harmonic spectrum plot of Figure 7.7. The distortion in the acoustic field that occurs near to a resonant frequency is graphically illustrated by intensity vector plots, shown by James [2], and energy streamline plots, shown by Skelton & Waterhouse [3]. The radial and circumferential components of the intensity vector are defined as IR = | R e .
(p(R,0)u*R(R,6)),
h = | R e . (p(R, e)u*e(R, 6)),
(7.3.23)
where particle displacements are obtained from the formulae
*^WM«,*), iagfl =„•„(*.).
(7.3.24)
For plane wave excitation of the aforementioned spherical shell, intensity vector plots for the rigid boundary case are shown in Figure 7.9, for a frequency of 271 Hz. The sound energy slips smoothly around the shell. Intensity vector plots for the elastic shell are shown in Figure 7.10, also for a frequency of 271 Hz. At this frequency the shell is at resonance in the n = 2 harmonic, as shown in Figure 7.7. The distortion in the acoustic field at this resonant frequency is illustrated vividly. In order to compare intensity levels in the plots, which are normalized, it is noted that for a plane wave of unit amplitude, the maximum intensity in the "hard" plot is 0.495 x 10~6 and the maximum intensity in the "elastic" plot is 0.368 x 10~ 5 , which is about 7.5 times larger.
Spherical Shell
177
Figure 7.9: Intensity vector plot of total pressure at 271 Hz for a hard spherical shell excited by a plane wave. The vectors are scaled as y/(I/Ima.x)-
Figure 7.10: Intensity vector plot of total pressure at 271 Hz for an elastic shell excited by a plane wave. The vectors are scaled as ^/(//I m ax)-
Acoustics of U~tderwaterStructures
References and Additional R,eading 1. M.C. Junger and D. k i t , Sound, Structures, and Their Intert~c.fion,, (second edition, 'Vhe MIT Press, Cambridge, Massachusetts, 1986). 2. J.1-I. ,James, Intensity veciors of sound scattering b y a spherical shell, (Admiralty Marine Technology Establishment, Teddington, Middlesex, AMTE(N)-TM84080, 1984). 3. E.A. Slcelto~land R.V. Waterhouse, Energy strearnlines for a spherical shell scattering plane waves, Journal of the Acoustical Society of America 80(5) (1986) pages 1473-1478. 4. E.H. Wong and §.I. Hayeli, Vibration and acoustic radiation from point; excited spherical shells, T l ~ eShock & Vibration Budletin 52(5) (1982) pages 135-148. 5. J.I-I. James, Fortrtzn program for vibration and sound radiation of a spherical shell, (Admiralty Research Establishment, Teddington, Middlesex, ARE-TM(N1)86501, 1986).
CHAPTER 8. ACOUSTICS OF THIN PLATE
8.1
Equations of Motion
The time-harmonic acoustics of a uniform plate has been studied extensively because it is a prototype for sound radiation from submerged structures, see, for example, the standard text on fluid structure interaction [1]. The geometry is shown in Figure 8.1. The equation of motion for pure bending of the plate is the modified thin plate theory of Sophie Germain,
, d4w . d4w
n/J
OJ N d*w
dii-£-T" + d22^-r- + 2(di2 + 2d66) a
a# 4
ay 4 +Psh^-
=
9 a 9
AJ
d4w
+ 4rfi 6
AJ
d4w
+ 4d 2 6 a
a
o
oxloy2, ox6oy oxoy-5 5,+ ^ - ^ - p , ( « , » . 0 ) + P 6 ( * , y , 0 ) , (8.1.1)
where VF(£, y) is the transverse displacement, positive in the positive z direction; Sz is the transverse stress traction, positive in the positive z direction, pt is the pressure in the upper fluid halfspace and pt, is the pressure in the lower fluid halfspace; Mx and My are moment distributions per unit area, about the x and y axes, being positive in the sense of a right hand screw; ps is the plate's density and h is its thickness. If rotations of the plate's mid-surface are required they can be found from the relations 9X = dW/dy and 6y = —dW/dx, in which positive directions are in the sense of a right hand screw about the x and y axes, respectively. The stiffness constants, rftJ, can be found for a symmetrically stacked fibre reinforced composite from formulae given in Section 6.8. The thin plate equation for coupled in-plane and bending motions has been given by Smith [2]. The displacement equation can be simplified by representing field quantities
179
Acoustics of Underwater Structures
180
by Fourier transform pairs in the x and y coordinates, for example, Y
F(x, y, z)
=
^
r+oo
/ + OO -oo
F
( a ' ^' *) e x P ( i a * + ii8y)dad/?,
/* + 00
/ /
/*+oo
/
F(x,y,z)exj>(-iax-ipy)dxdy,
(8.1.2)
J — oo
where F ( z , y, z) is the field quantity and F ( a , /?, z) is the spectral field quantity. The arguments of the function and/or the context determine whether or not the formulation is proceeding in real space or in spectral space. By using the above transform representation, the time-harmonic equation of motion of the plate, without moment loading, is S(a,f3)W(a,(3)
= Sz(a,l3)-pt(a,p,0)
+ pi(at/3,0),
(8.1.3)
where S(a,{3) = d11a4^d22f34^2a2/32(d12^2deeH^dl6Pa3^Ad2G^p3-^2psh
(8.1.4)
is the spectral stiffness of the plate. For the case of the plate made entirely of isotropic material, this stiffness has a particularly simple form, viz. 5(a,/?) = D{a2 + p2)2-u2psh,
(8.1.5)
where, in terms of basic engineering constants, the bending stiffness is D = Eh3/12(1 — v2) where E is Young's modulus and v is Poisson's ratio. It is this equation that is used for the remainder of the chapter. 8.2
Mechanical Excitation
A transverse mechanical point force, located at the coordinates (a?o, yo), and its spectral form, comprise the transform pair Sz{x,y)
=
F06(x-
x0)6(y-y0)i
Sz{a,(3)
=
F0exp(-iaxo-i(1yo),
(8.2.1)
where Fo is the amplitude of the point force. An alternative excitation, not used herein, is the external stress which has a constant value 5o over the rectangular region, — a < x < a, — b < y < 6, in which case Sz (<*,/?) = 45 0 sin(aa) sin(/?6)/a/?.
(8.2.2)
Thin Plate
181
Figure 8.1: Section of thin infinite plate excited by point force, monopole and plane wave. The acoustic pressure in the upper halfspace, due to plate motion, must be an outgoing wave solution of the reduced wave equation which satisfies the radiation condition of Eq. (3.3.2). Thus, 1
Pte(x,y,z)=~
/»+oo
/
r+oo
/
P(a,0)exp(iax
+ i0y + iytz)dad0,
(8.2.3)
where j t - +V(kt - <*2 ~ P2), kt = u/ct and ct is sound speed in the upper halfspace. By applying the boundary condition, reflecting equality of acoustic and plate transverse displacements at z — 0, dpte
= pt^2W(x,y),
at z = 0,
(8.2.4)
where W(x, y) is the transverse plate displacement, the unknown function P ( a , /?) can be eliminated from Eq. (8.2.3), giving
47T
J — oo J — oo
1
Tt
where W(a,j3) is the Fourier transform of the plate displacement. The pres sure in the far field is obtained by the method of stationary phase, by direct
Acoustics of Underwater Structures
182
application of Eq. (4.1.24), as Ptef(R,e,4)
= -p^2W(a0,/3Q)eXPo{'lkf\
(8.2.6)
where, in a system of spherical coordinates, (R,6,<j)), the stationary phase wavenumbers are ao = kt sin 9 cos > and (3Q = kt sin 9 sin . By following a similar procedure the pressure anywhere in the lower halfspace is found to be p
6 c
( x , y , z ) = ^ ! f °° f °°
W
^ & exp(iax -f i/?y - i 7 ^)dad/9. (8.2.7)
Here, 75 = H-\/(Ar^ — a 2 — /? 2 ),fc&= w/ci, and c& is sound speed in the lower halfspace whose density is pi. The negative sign accompanying the coordinate z in the exponential function is a consequence of the radiation condition in the lower halfspace, which requires outgoing waves only. The spectral equation of motion of the plate is obtained from Eq. (8.1.3) as S(a,ff)W(«,0)
= ^ o e x p H ^ o - i ^ o ) - ^
2
^ ' ^ - ^
2
^ ' ^ -
(8.2.8)
This equation is rearranged as Df(a,0)W(a,P)
= F0exp(-iaxQ
- i/?y0),
(8.2.9)
where Df(a,0)
= D(a2 +/? 2 ) 2 - u*p9h _ 1 ^ ! _ ^ ! It
( 8 . 2 .1 0 )
lb
is the spectral stiffness of the plate with fluid loading. The fluid loading terms act as a resistance for acoustic wavenumbers k2 > a2 + f32, and act as a mass for k2 < a2 + f32, where k is set to kt and ki for the upper and lower halfspaces, respectively. The solution of this spectral equation is W(a,0)
= F0exp(-iax0
- i0yo)/Df(a,p),
giving the transverse displacement of the plate as
(8.2.11)
Thin Plate
183
T h e pressure anywhere in the upper halfspace, and its far field form, are obtained from Eq. (8.2.5) and Eq. (8.2.6) as „
(r « A
Vte\X,y,
*w
-
f I
4TT 2
Ptef(R,e,4>)
/>+oo
E
,
°
<■) —
f
/*+oo
exp (ia(x - a;o) + i/?(t/ - t/ 0 ) + i T < z)
/
y_oo
:
y_oo
—
—
■
dad/3,
ijtDf(a,p)
-Ptw2W{a0,fo)e*P}ik'R)
=
Z7T/L
-ptu>2F0
.
xexp(iktR)
/ n n i n
^
T h e acoustic power radiated in the upper halfspace is defined in equivalent ways as 2
rad
—
~Re. ^
r-too
/»+oo
I
I
J — OO
-fie.—- / Z
Pte(x,y,0)W*(x,y)dxdy
J — OO
/
^7T J_oo
p, e (ar,/?,0)W*(a,/?)dad/?
J -- oO Oo
r27r
= =
lim
/
R^oo
ZptCt J0
TTT-
I
I
/-Tr/2
/
\pteJ(R,0,<j>)\2R2sm0d0d
J0
\W(a0,Po)\2smOded,
(8.2.14)
where, it is recalled, the stationary phase wavenumbers are ao =
fctsinflcos^
and /?o = kt sin 0 sin <j>. For an isotropic plate excited by a force located at the origin, XQ — yo — 0, the problem evidently has cylindrical symmetry because field quantities are independent of the azimuthal angle >. In this case, the double integrals for the displacement and pressure can be reduced to single integrals. First transform the equations, with xo = yo = 0, to polar coordinates by using the substitutions a — s cos ?/>, P — s s i n ip, x — r cos 0^ y — r s i n 0, x2 + y2 = r2 and dad/3 = sdsdift] secondly, by using Eq. (1.6.8), with n = 0, the ^ integral can be evaluated. After changing the d u m m y variable of integration from s to a, the integral representations of plate displacement and pressure are obtained as
w(r) =
E±r
_
2ir J0 ptu)2F0
Pu(r Z)
'
~
2w
^M f°° J0
da,
(Da4-w2psh-iptu2/jt-iPbu2/yb) aJo(ar)exp(i7tz) iyt(Da4-U*pth-iptu>y7t-iPtLJ*/7b)
"' (8.2.15)
Acoustics of Underwater Structures
184
where here, j W(r)
t
= ^/(k2
- a2) and j
b
= y/(kl
-a2).
T h e plate displacement
does not have a known closed form solution, but Crighton [3] has obtained
an expression which is valid at very low frequencies. A simple adaptive Gaussian q u a d r a t u r e formula can be used to evaluate the integral numerically, provided there is some dissipation included in the formula for the plate's bending stiffness. T h e dispersion relation of the fluid/plate system, with a vacuum in the lower halfspace, say, is the function DaA - uj2p5h - iptu>2/jt
= 0.
(8.2.16)
At a prescribed frequency, in the absence of structural damping, real values of a for which this function vanishes correspond to free waves of wavenumber a , phase speed uj/a and group velocity d w / d a . This relation has been investigated by Crighton [4] who demonstrates t h a t at all frequencies there is only a single subsonic free wave for which a > kt\ there are no purely real roots for which a < kt.
However, above the coincidence frequency of the in-vacuo plate (see
below), kt > cty/{psh/D),
there is a root which has a small imaginary part
and whose real part is less t h a n kt.
This corresponds to the "leaky wave"
b e a m which is significant only for a fairly narrow angular range around the propagation direction but can propagate to quite large distances from the plate in t h a t direction with a slow exponential decay. Hence the "leaky wave" beam is physically significant over certain ranges of angle 0 and distance R} and it is substantially responsible for the conical lobes present in the angular distribution of radiated sound. Continuing with the case of a single point force located at the origin xo = 2/o = 0, the far field pressure is obtained from Eq. (8.2.13) as „ (na\Ptef(rtiV)
-ptU2F0 exp(iktR) : — r—I = 2~/ Ti \—^~B—i 4 {Dal ~ u2psh - iptOJ2/jto - ipbu2/jb0) 2irR
where a0 = ktsm0,
yi0
=
fctcos#,
and 7&0 = +y(&& - fct2sin2 0).
,ft017x (8.2.17) A com
prehensive physical interpretation of the far field pressure has been given by Junger &; Feit [1], for the case in which there is a vacuum in the lower halfspace. At low frequencies the sound pressure is Ptef(R,6)
S -MtFQeXP^R)
cos0,
(8.2.18)
Thin Plate
185
which is independent of the plate constants and equal to the pressure of a trans verse point force applied at a soft surface, i.e. twice the pressure of a point force in unbounded fluid. At frequencies above the coincidence frequency, defined for a plate with a vacuum in the lower halfspace as the frequency at which the acoustic wavenumber, kt = u>/c*> *s equal to the flexural wavenumber, a =
(u2psh/D)llA,
in the unloaded plate, viz. fc = ^{p.h/D)1'2,
(8.2.19)
a dominant lobe at an angle 6C = s i n - 1 ((c^c/u;) 1 / 2 ) appears; this is the so-called coincidence lobe. T h e peak level in the lobe depends crucially on the structural loss factor 77, introduced as E = E{\ — irj). Note t h a t equality of wavenumber also implies equality of wavelength. T h e power input to the plate is defined as P i n = ±Re.F0(-iuW*(r
= 0)),
(8.2.20)
and the radiated power in the upper halfspace becomes
P rad = %0L I
|^(a o )| 2 sin0d0,
(8.2.21)
\ ,
(8.2.22)
where W(a0)
=
7 ? r i
2
,
.
F
:
27—r.
For a numerical example, sound radiation from a steel plate of thickness 1 cm and with loss factor 77 = 0.01 is considered. The upper halfspace contains water and the lower halfspace is a vacuum. T h e excitation is a unit transverse point force located at the origin.
In Figure 8.2, for frequencies 400 Hz and
40 kHz, is shown the angular distribution of far field sound levels in decibels reference 1 micropascal at 1 m , defined as 20'X log 1 0 \p(R = 1,0)| -f 120. At 400 Hz the sound pressure approximates t h a t of a dipole, and it varies closely as cos#. At 40 kHz, which is well above the coincidence frequency of 23.6 kHz, the coincidence lobe at 9 = 50° is seen to dominate. In Figure 8.3 is shown input and radiated power levels in decibels reference 1 picowatt, defined as 10 x log 1 0 | P | + 120. T h e input power is insensitive to structural damping, ranging from 77 = 0.01 to 0.1; the radiated power becomes sensitive to structural damping at frequencies above the coincidence frequency. As frequency increases, there is
186
Acoustics of Underwater Structures
Figure 8.2: Angular distribution of far field sound level, of a 1 cm steel plate with water loading on one side only, at 400 Hz and 40 kHz. The excitation is a unit point force. Levels are in dB reference 1 micropascal at 1 m.
Figure 8.3: Input power (insensitive to damping) and radiated power of a 1 cm steel plate with water loading on one side only. The excitation is a unit point force. Levels are in dB reference 1 picowatt.
Thin Plate
187
a rapid increase in the radiation efficiency until most of the mechanical power input is dissipated as acoustic radiation in the water. Key features of the acoustics of a thin plate are graphically illustrated by intensity vector plots. The mathematics for the line excited plate has been given by Spicer [5]. Horizontal Wx and vertical Wz acoustic particle displacements, and pressure p(x, z), stemming from a line force excitation Fo located at x = XQ on a plate which has fluid on one side alone, are W
(x
z\
-
w <~ *\ Wz{x,z) n<„ *\ P\x,z)
=
El r°°
^exp(i7t^)exp(ia(x-x 0 ))
F + e p ( i 7 t z— ) e x p ( i a ( x——-da, -x0))^ —° If °° —x— : 2irJ_00 (Da4-u2psh-\ptu2/yt)
Ptu2Fo f+°° exp(i7^)exp(ia(x-x 0 )) ^ —75 / • /n 4 o—I—: 2 ~ / T d a ' (8-2-23)
where jt — -\-\J\k2 — a 2 ). The components of the resistive intensity vector for this two-dimensional problem are defined as Ix{x,z)
=
Iz(x,z)
=
Re±(p(x,z){-iwW:(x,z))), Re±(p(x,z)(-iu>W;(x,z))),
(8.2.24)
with amplitude and phase \I\ = ^Px{x)Z)
+ Pz{x,z\
1 Iz(x,z) 9 = tan" 1 j ^ \ . lx(x,z)
(8.2.25)
The reactive components of the intensity vector are obtained by replacing, in Eq. (8.2.24), the real part (Re.) by the negative of the imaginary part (Im.). In Figures 8.4 and 8.5 are shown resistive intensity vector plots for a line excited steel plate, of 1 cm thickness and loss factor r] — 0.01, loaded by water on one side alone. At 400 Hz, much of the power flow is seen to occur near to the plate's surface; this is substantially due to the subsonic surface wave. At 40 kHz, much of the power flow takes place in a beam centred on 9 = 50°; this is substantially due to the leaky wave beam which is responsible for coincidence lobe radiation in the far field.
188
Acoustics of Underwater Structures
Figure 8.4: Intensity vector plot of a line excited plate, at 400 Hz, scaled as ^ ( / / / m a x ) . T h e vertical distance extends to 0.3 m and the horizontal distance to 0.6 m .
Figure 8.5: Intensity vector plot of a line excited plate, at 40 kHz, scaled as 7 / / m a x . T h e vertical distance extends to 0.3 m and the horizontal distance to 0.6 m.
Thin Plate
8.3
189
Monopole Excitation For the case of a monopole located at (zo, yo, ^o) in the upper halfspace,
where here ZQ is distance above the plate which is located at z = 0, the pressures in the upper and lower halfspaces are decomposed as Pt(x, y, z)
=
pi(x, y, z) + pr(x, y, z) + Pt e (z, y, *),
p6(x,y,z)
=
p6e(:r,y,z),
(8.3.1)
where the pressures, obtained from Section 4.1, / x Pi{x,y,z)
/-^ ^ x * exp(i&t|R— Rol) pt-(R,Ro) = A | R _ R Q |
=
HI: HI:
__iA
[ [+°° e x p { i a ( z - s 0 ) + i/?(y - yo) + 17*0 -
2* J J-oo \A
e x p { i a ( x - x0) + i/?(y - y0) - iyt(z -
2W y.^ p
„(x,y,z)
=
o)}
dad/?, for z > ZQ,
It
f+oc
f
z
z0)}
jt ^
/
/
dad/?, for z < ZQ,
r+oo
°° exp{ia(x - «„) + i f l g - y0) + ^(z
+
z0)}^^ (8.3.2)
are those of the monopole and the pressure scattered from a hard surface at z = 0. T h e distance from the monopole in the upper halfspace to the observation point, (x, y, z), is | R - R 0 | = \/{(x
- x0)2 + (y - y 0 ) 2 + (z - z 0 ) 2 } . The upper
and lower halfspace pressures, pie{x,
y, z) and pbe(x, y, *), due to spectral motion
W{a,p)
of the plate are given by Eq. (8.2.5) and Eq. (8.2.7), as
, , pte(x,y,z)
=
PtLj
2
/+°° /
—y ^7T
pfee(x,y,z)
=
J—oo
/+OQ^(a,/?) / —: e x p ( i a z + i/?y + i7*z)dad/?, «/—oo
/
2
4^
/
J— oo
*Ti
—:
J — CO
exj>(iax +
ipy-iybz)d(xdp,
*T&
(8.3.3) where W ( a , / ? ) is the Fourier transform of the plate displacement. T h e transform of the sign changed blocked pressure, — {pi(x, y, 0)+pr(x,
y, 0)},
viz., Sz(a,f3)
=
47ri.A Tt
e x p ( - i a z o - i/?yo + i7t*o),
(8.3.4)
Acoustics of Underwater Structures
190
replaces the mechanical spectral excitation in Eq. (8.2.9). The solution for the plate spectral displacement is then 47riA
W(a,P) =
It
exp(-k*z 0 -i/fyo +ijtz0)/Df{a,f3).
(8.3.5)
The far field pressures in the upper halfspace, at observation angles (#,<£), are obtained from Section 4.1 and Eq. (8.2.6), as
MM) ,v pr/(fl,M) /Dfl
= A^f^x exp {—ikt(xo sin 9 cos + t/o sin 6 sin > -f ZQ COS 6)}, exp(ifctJR) A ^—^x
=
exp{—iArt(a?o sin 0 cos <> / -f yo sin 0 sin <j> — ZQ COS 0)}, PteS{R,9A)
=
-^
2
^(a
0
,/?o)^|^,
(8.3.6)
which are spherically spreading waves. The total pressure in the far field of the upper halfspace is ptf(R,6,<j>) = Pif(R)6,(i>)
+ prf{R,6,) + ptef(R,61),
(8.3.7)
and the far field scattered pressure is defined as Ptfs(R,
6, <j>) = p r / ( # , 0 , 0 ) + ptef(R, 0, ).
(8.3.8)
For the case of a monopole located in the lower halfspace at coordinates (^o,2/o,^o)5 where ZQ is negative, the excitation is the blocked pressure, SZ{OL,P)
47riA lb
e x p ( - i a z 0 - i/?yo - 17^0),
(8.3.9)
which can be obtained from Eq. (8.3.4) by considerations of symmetry and the standard sign convention for pressure. The spectral displacement of the plate is then W(a,/3) = - ^ - e x p ( - i a z 0 - i/fyo - i7bzo)/Df(aJ).
(8.3.10)
lb
The pressure anywhere in the upper halfspace is Ptuj2 r + °° f+co W(a 0) pte(x, y, z) = Y " 2 " / / ■ exp(ic*ar + ifiy + i7tz)dc*d/?, ^^" J—oo J—oo *7t
(8.3.11)
Thin Plate
191
whose far field form is = -P«"2^(«o,ft)"P2(y,
PuARA*)
(8.3.12)
where, it is recalled, a 0 = ^ s i n ^ c o s ^ and /?0 =fc*sin0sin> are the stationary phase wavenumbers. 8.4
Plane Wave Excitation
For the case of a plane wave incident at angles (0,-, >«), as shown Figure 8.1, the total pressures in the upper and lower halfspaces are decomposed as pt(xy y, z)
=
pi(x, y, z) + pr(x, y, z) + p tc (jj, y, z),
Pb(x,y,z)
-
phe(x,y,z),
(8.4.1)
where Pt e (#, 2A z) and p&e(#j V, z) are the pressures in the upper and lower halfspaces due to the vibration of the plate. The incident pressure and the specular reflection, as though the plate were hard, are obtained from Section 4.1 as Pi(x, y, z)
=
Aexp(-ia{x
- i#y -
pr(x,y,z)
=
Aexpi-iaiX-ifcy
iyuz),
+ iytiz),
(8.4.2)
where on — kt sin Oi cos fc, Pi
=
A? t sin^sin^,
jti
=
kt cos Oi,
(8.4.3)
and kt = <*>/ct is the acoustic wavenumber in the upper halfspace. The excitation on the plate is the sign changed blocked pressure Sz(x, y) = -{pi(x,
y, 0) + pr(x, y, 0)} = -2Aexp(-ia,-ar
- i#y),
(8.4.4)
which has spectral form Sz (a, /?) = -2(4ir2)A6(a
+ <*,■)*(/? + &)•
(8.4.5)
The plate spectral equation of motion is obtained from Eq. (8.2.9) as Ds(a,p)W{a>P)
= -2(47r2)A(5(a + a t ^(/?-f &•),
(8.4.6)
Acoustics of Underwater Structures
122 whose solution is
W(a, /?) = - 2 ( ^ 2 ) ^ ( « + « W + A ) -
(8 4 7 )
The pressures in the upper and lower halfspaces, due to boundary motion, are obtained by substituting this equation into Eq. (8.3.3), giving Pte(x,y,z)
=
pbe(x,y,z)
=
* 2
?U' A iyHDf(-ai,-l3i)
exp(-iaix-i0iy n
, exp(-ia,x
+
mz),
- ifly - ijuz),
(8.4.8)
where the Fourier integrals have been trivially evaluated because of the integration properties of the delta functions, and 7M
= ^ ( * ? - * ? sin0
ft),
(8.4.9)
with kb = u/cb being the acoustic wavenumber in the lower halfspace. The total pressures in the upper and lower halfspaces are given by Eq. (8.4.1). The scattered and transmitted pressures are defined as pu(x,y,z)
= =
ph(x,y,z)
= =
pr(x,y,z)+pte{x,y,z) ( \1 +
\ .
-2ptw2 :-v n ( n
T\
\ „
A ex
, . „ . , P ( - i a » r ; ~ &V + Vtiz),
vruDA-au-Pi);
Pie{x,y,z) .nPrA_g
exp(-iafx
- ifoy - ijbiz).
(8.4.10)
The reflection, Kt, and transmission, Tb, coefficients are defined as
In order to simplify subsequent work, when planar surfaces are excited by plane waves, it is noted that the Fourier transform of the excitation and subsequently an inverse transform to find the field quantity is trivial due to ohe properties of the delta function. Transforms are unnecessary here because the excitation is of pure wavenumber. Thus, it is only necessary to solve the equation £>,(-<*,-, -0i)W(-ai,
- A ) = -2A,
(8.4.12)
Thin Plate
193
where W{—a;, — $)exp(—ia 2 # — i$y) is the spectral displacement of the plate. The reflection, !Zt, and transmission, T&, coefficients are then K
,.1+^(-»..-W,T,c-^(-«..H*)t '•4*'cos9i M^/fiJ-tfsin1*,)
which are in accord with Eq. (8.4.11). 8.5
Transient Sound Radiation
The far field pressure transient of an infinite thin plate subjected to a pre scribed transient point force, at the origin, is obtained from the time-harmonic solution, given by Eq. (8.2.17), and the methods of Section 2.2, as
Pf(R,^i) = ~
I*™ nf°(U\
exp
(-'^ ~ Rlc^ d"-
( 85 - 1 )
where Df(a0,u>) = (Da% - LJ2psh -
iptuj2/yt0),
a0 = kt sin 0, j t 0 = kt cos 0,
(8.5.2)
and FO(LJ) is the Fourier transform, as defined by Eq. (2.2.3), of the force whose time variation is Fo(t). The problem has been simplified; first by placing the point force at the origin of the coordinate system to preserve cylindrical sym metry about the z axis, and secondly by assuming that there is a vacuum in the lower halfspace. The integral can be evaluated numerically, as described in Section 2.2. The integration in Eq. (8.5.1) can also be done analytically, by using Cauchy's residue theorem, because there are no branch points to muddy the waters. It is assumed that only simple poles arising from the function Dj(ao,u>) are of relevance. These poles are located at the roots of the cubic a 0 + aiu + a3w3 = 0,
(8.5.3)
where a0
=
—iptCt/ cos0,
<*i
=
—Psh,
a3
=
Dsm49/4.
(8.5.4)
Acoustics of Underwater Structures
194
At an arbitrary angle 0, there are, in the absence of structural damping, three roots of the form u>i = —2iu;z-,
u;2 = wr + iu>,-,
u>3 = -u> r + iu;,-,
(8.5.5)
in which u;r and a;,- are positive. These roots are trivially evaluated numerically, by s t a n d a r d software for calculating the roots of a cubic. For a 1 cm steel plate, loaded on one side only by water, a selection of values of ujr and uj{ are given in Table 8.1, in which fr is a frequency in kHz. For values of 6 less t h a n 70°, the components of the roots can be approximated by ur
~
c2t(psh/D)^2/sin2
uji
~
ptct/2pshcos0,
0, (8.5.6)
which show t h a t ur depends strongly on both mass and stiffness properties of the plate, while u)i is controlled by the plate's mass properties. The minimum value of ujr, given by the approximation, is the coincidence frequency.
Thus,
it m a y be possible to assign physical meaning to u>r as the true frequency of coincidence lobe radiation at angle 9. T h e values in Table 8.1 demonstrate t h a t ur is infinite at 6 = 0°, drops to a minimum of 26.7 kHz at 6 = 77°, and then rises rapidly as 6 — 90° is approached; values of u;,- increase as 0 varies from 0° to 90°. Proceeding in a cavalier way with the contour integration, assuming t h a t the forcing function is switched on at t = 0, it is possible to obtain physical insight by considering the contours of integration. For 0 < t < R/ct,
the contour is
bounded by the real LJ axis and an infinite semicircle in the upper halfplane. This contour encloses the poles u>2 and u>3 whose residues combine to produce a pressure Pj(R,0,t)
oc exp (u)i(t - R/ct))sm(ur(t
- R/ct)
+ tf), 0 < t < R/cu
whose amplitude increases exponentially with time until / = R/ct contour integration is no longer valid. For t > R/ct
(8.5.7) when the
the contour is bounded by
the real LJ axis and a semicircle in the lower halfplane. This contour encloses the pole u>i, the poles u2 and u;3 no longer contributing. The residue from the pole uj\ produces a pressure pf(R,
0,t) ex exp (-2u>i(t - R/a)),
t > R/cu
(8.5.8)
Thin Plate
195
Table 8.1: Location of integration poles, obtained from the roots of cubic, of a 1 cm steel plate loaded by water on one side only.
1 9°
10 20 30 40 50 60
70 77 80 85 89
1 89.9
w r x 10~ 3 4916 1267
593 359 254 200 174 168 170 186 274 552
uji x 10" 3
fr = K / 2 T T ) x 10~ a II
782~4 201.7 94.4 57.2 40.4 31.9 27.7 26.7 27.0 29.6 43.5 87^
9.9 10.4 11.2 12.7 14.9 18.8 26.0 35.8 42.7 64.2 132.7 307.1
1
which decreases exponentially with time. At broadside, 9 = 0°, a special case occurs: there is only one root whose location is in the lower halfplane at LJ\ = —iptCt/psh.
In this case the pressure is zero for 0 < t < R/ct
because there are
no poles in the upper halfspace, and decays, as in Eq. (8.5.8), for t >
R/ct.
T h e aforementioned behaviour of the far field pressure at broadside is sub stantially this: there will be zero pressure for t < Rjcu
and for t > R/ct
an
exponentially decaying pulse will be observed. This fits in well with a pulse orig inating at the drive point and taking time R/ct
to travel through the fluid. Off
broadside, the behaviour is the same for t > R/ct,
but at earlier times t <
R/ct
there will be an exponentially increasing pulse oscillating at the coincidence fre quency. This feature can be explained by referring to Figure 8.6. An energy packet injected into the plate at t = 0 will reach the far field coordinate (R, 0) via the fluid p a t h AB at time t\ — R/ct.
Energy launched along the plate with
group velocity cgy and radiating continuously with single frequency at the Mach angle 6, will reach point C at time t2 = d/cg.
T h e acoustic radiation from point
C will reach the far field via the p a t h CD at time £3 = d/cg -f (R — d sin
0)/ct,
i.e. after the sum of the plate and fluid travel times. When these two travel times are subtracted, the value of (t\ — ts) = dsin 0/ct — d/cg is the time lead of the indirect radiation, via the plate and fluid, over the direct radiation entirely through the fluid. Two points are relevant from this time difference. First, when
Acoustics of Underwater Structures
196
Figure 8.6: Schematic of transient sound radiation from a thin plate.
2500
Figure 8.7: Far field sound pressure, in millipascals reference 1 m, at observation angle 9 = 0° (broadside) of a 1 cm steel plate with water on one side only. The time scale, in milliseconds, has an arbitrary origin. The excitation is a point force of unit amplitude whose time variation is a 10 kHz sine wave on for 1 cycle.
Thin Plate
197
cg > ct/ sin 6, which is the condition for coincidence radiation, the indirect radi ation will arrive at the observation point before the direct radiation. Secondly, when this condition applies, the greater the value of c?, the earlier will coinci dence radiation arrive at the observation point, and as d increases the radiation is necessarily weaker due to previous energy loss by radiation and structural damping. Thus, except at broadside, the initial waveform at the observation point is launched from large distances along the plate and oscillates at the co incidence frequency; as time approaches t — R/ct there is a rapid build up as coincidence radiation launched close to the drive point arrives; at t = R/ct the coincidence lobe radiation starts to switch off and radiation direct from the drive point arrives which eventually decays exponentially to zero. Precise details of the transient pressure are dependent on the nature of the excitation waveform;
Figure %.%\ Far field sound pressure, in millipascals reference 1 m, at observation angle 9 = 50° of a 1 cm steel plate with water on one side only. The time scale, in milliseconds, has an arbitrary origin. The excitation is a point force of unit amplitude whose time variation is a 10 kHz sine wave on for 1 cycle.
Acoustics of Underwater Structures
198
for example, if the excitation is a delta function the coincidence radiation will end abruptly a t t = R/ct; if the excitation is on until time to, the coincidence lobe radiation will finally end a t time t = to. In Figures 8.7 and 8.8 are shown far field pressure pulses from a 1 cm steel plate, with loss factor rj — 0.01 and water on one side only. T h e unit point force excitation is a 10 kHz sine wave which is on for 1 cycle. At the observation angle 9 = 0°, the pressure pulse has substantially travelled directly from the drive point; its shape closely follows the excitation, but there is some overshoot at the end followed by an exponential decay. At the observation angle 0 = 50°, there is a small b u t exponentially increasing precursor pulse, from coincidence lobe radiation oscillating a t 40 kHz; this is followed by the main pulse which arrives via the direct p a t h .
Further numerical examples are t o be found in
references [6-7], which also include plots of transient pressure in the near field.
8.6
Frame a n d B u l k h e a d Stiffened P l a t e In Figure 8.9 is shown a cross-section of a thin plate which is reinforced by
periodically spaced frames and bulkheads parallel to the y axis. The distance between frames is d\ the distance between bulkheads is gd, where there are q bays between bulkheads. Both upper and lower halfspaces contain fluids. T h e dimensions of the frames and bulkheads are assumed small, so t h a t they d o not interfere with wave propagation in the lower halfspace nor cause significant coupling between transverse and in-plane motions of the plate.
Further, t o
simplify the m a t h e m a t i c s , the frames and bulkheads are represented by thin b e a m s which are hinged at the plate contact points, so t h a t they do not transmit m o m e n t s about the y axis. T h e spectral equation of motion of the system is D,(a,l3)W(a,0) = S,(a,0)-PJ(a,0)-lMa,0)i
(8.6.1)
where !>,(*,/?) = D ( a 2 + /? 2 ) 2 - u , 2 M " ^ It
- ^ 7b
(8.6.2)
is the spectral dynamic stiffness of the isotropic plate, with fluid loading, and Sz(a}/3)
is the spectral excitation.
For the case of an anisotropic plate, its
spectral stiffness is given by Eq. (8.1.4). T h e functions P / ( a , / ? ) and Ph{ot,(3)
199
Thin Plate
Figure 8.9: Frame and bulkhead stiffened plate excited by point force and monopole. There are q bays between bulkheads. are spectral reaction stresses due to the attachment of frames and bulkheads. These reaction stresses can be found from the equations of motion of the nth frame and the nth bulkhead, both modelled as Euler beams, dAW{x — nd,y) - pfLJ22AfW(x = nd,y) Eflf dy4 d4W(x = nqd,y) - pbcj2AbW(x = nqd, y) Ebh
=
Bj{x-nd,y), Bb(x = nqd, y),(8.6.3)
where for the frame, Ej is Young's modulus, // is the cross-section area mo ment of inertia, pj is density, A; is cross-section area and Bj{x = nd,y) is the transverse excitation force, per unit length in the y direction, on the nth beam. Similar definitions apply for bulkheads. The reaction stress traction on the plate, due to attachment of the infinite set of frames and bulkheads, is oo
P / ( s , i / ) + A ( x , y ) = X I Bf(x^nd}y)S(x-nd)+ n = -oo
oo
] T Bb(x =
nqd,y)S(x-nqd)1
n= -oo
(8.6.4) where the delta function has dimension [m" 1 ] in order to convert forces per unit length in the y-direction to forces per unit area. The Fourier transform of this
Acoustics of Underwater Structures
200
equation is obtained as
Pf(a,P) + Pb(a,/3) = oo
2^
oo
Bf(x = nd,/3)exp(—iand)-{-
n — — oo
\^
Bb(x = nqd,f3)exp(—ianqd).
(8.6.5)
n = — oo
The Fourier transforms of Eq. (8.6.3) are (EfIf/34 4
- u2pfAf)W(x 2
(EbIbf3 -u> pbAb)W(x
= ndj)
=
Bf(x = nd,/?),
= nqd,f3)
=
Bb{x = nqd, /?).
(8.6.6)
The notation for Fourier transforms is important here: while W(a, /?) is the com plete two-dimensional transform, W(x}/3) is the partial one-dimensional trans form for the y variable. The above equations are used to eliminate the frame and bulkhead excitations, Bj(x — nd,/3) and Bb(x = nqd,/?), respectively, from Eq. (8.6.5), giving CO
Pf(a,/3) + Ph(a,f3)
=
(EjIf0*-w2pfA,)
] £ W(x =
nd,0)exp(-icmd)
n = —co oo
+(JE>ZJ/?4 - u2ptAt)
Y,
W{x = nqd,0)exp(-ianqd).
(8.6.7)
n = —co
By using the Fourier transform relation of Eq. (1.2.8), viz. oo
oo
1
J2 F(x = nd0,f3)exp(-iand0) *—'
= — V F(a + 2™/do,/?), do ^-^
n = —oo
(8.6.8)
n = —oo
Eq. (8.6.7) is written as Pf(a,0)
+ Pj,(a,/3)
=
(EjIfp4-L>2pfAf)-
°°
i
] T W(<* + 2™/<*i 0) n = —oo
1 °° 4 2 H - ^ / * / ? - * ^ ) - ^ XI Wr(c* + 2irfi/gd>/?). (8.6.9) n= -oo
Defining G,{f>) = Hh{f3)
=
{EjIjf-u'pjA,)/*, 2
(EbIb^-u: pbAb)/qd,
(8.6.10)
Thin Plate
201
as the spectral stiffnesses due to the frames and bulkheads, allows the solution of Eq. (8.6.1) to be written as W(a,(3) =
(l/Df(a,l3))x
(
oo
Sz(a,P)-G}{I3)
OO
J2 W(a+2irn/d,P)-Hb(f3) n = — oo
£
\
W(a+2im/qd,/?)).
(8.6.11) /
n = — oo
The solution of this linear equation for W(a, /?), in the absence of bulkheads, viz. Hb = 0, can be achieved by using the periodicity relations of Evseev [8]. As it stands, the solution is not immediately obvious, and at first sight it looks as if a numerical approach is necessary. However, Mace in reference [9] (and in unpublished correspondence, 1979, leading to reference [10]) has neatly obtained a closed form solution, which is reproduced by permission of the publisher Aca demic Press Limited London. In order to compact the notation, Eq. (8.6.11) is written as oo
p
V(a) = F(a)--5-L-
b V(a-en)-— -
£ * ^
' n = — oo
rr
oo
£ J^
V(a-en/q),
(8.6.12)
' n = — oo
where V(a) = W(a,/3), e = 2w/d, F(a) = | 4 j j | , £>/(«) = Df(a,/3).
(8.6.13)
The sign change to the index n inside the summation is valid because the sums are infinite. The functions CO
P
r(a)
=
Yl
F(a-en-erlq),
n = —oo oo
Yr(a)
=
YJ
l/Df(t*-en-er/q),
(8.6.14)
n = —oo
are also required. The solution of Eq. (8.6.12) is made more manageable by rearranging the second summation, giving r
V
^ =
F
^ - ^ h s J^
OO
E ' n= -oo
0-1
^ - " l - f l i E
oo
E
V(a-en-et/q).
■' ^ ' t = 0 n = - o o
(8.6.15)
Acoustics of Underwater Structures
202
By following the analysis of Evseev [8], it is noted that this equation is valid for all values of a, and in particular it is permissible to set a to a — em - er/q with integer r and ra, and then sum over all integer m, giving, after changing a dummy index from m to n, q— 1
oo
Pr(a) - HbYr(a)^2 £
V^-en-er/q)
=
Y,
V(a-en-et/q) '
1?GJW<*)
n = —oo
(8.6.16) where the periodicity relations y ^ V(a—en — em)
=
\J
n = —oo q—\
oo
Z] H
V(a — en),
n = —oo g—1
V(«-en-e*/«-«7«)
=
oo
2
t=0n = — oo
] £ ^ ( a - e n - e t / g ) , (8.6.17)
*=0n = - o o
have been used. By setting r = 0 in Eq. (8.6.16), the equation q—l
oo
Po(«)-ff»YoM£
S "<"-«) =
£
V(o-en-e,)
rS^fe J
n= -oo
v
(86 18)
-
7
is obtained. Now sum Eq. (8.6.16) from r = 0 to <j — 1, giving, after collecting terms in V, ,-i £
oo
£ > ( « ) / ( l + G/Y,.^))
£
r=0n=
V(a - en - er/g) =
-°°
r 0
-
>_1
.
(8.6.19)
l + HiY.YrW/il + GjYria)) r=0
The solution is completed by substituting Eq. (8.6.19) and Eq. (8.6.18) into Eq. (8.6.15), giving, after collecting terms,
Via) = Flo) 1
}
K
^—— '
Df(a)(l
'—^ + G,Y0(a))
!^2
J
n
}
>
(8.6.20)
Thin Plate
203
The spectral excitation, Sz (a, /?), and resulting pressures in terms of W(a, /?), for a mechanical point force on the plate and monopoles in the upper and lower halfspaces, are given in Sections 8.2 and 8.3, respectively. The special case of a plate periodically stiffened by frames alone is recov ered by setting Ht, = 0; for this case the second term in the brackets vanishes, resulting in
Gf(P) W(a,/3)~
b (a P) ' ' Df(a,/3)
^-*
Sz (a — 2irn/d, /?)
n=
-°°
D,ia.n H
W
f
P/(a _L„ MW|
(8.6.21) as the spectral displacement of the plate. The first term in this equation is the spectral displacement due to the excitation force 5 2 (a,/?) acting on the plate without frames. The second term is the spectral displacement due to the reaction forces of the frames. This term consists of a spectrum of discrete wavenumbers, a — 27rn/cf, stemming from wavenumber conversion at the frames. As a check on the correctness of this equation, the n = 0 term alone in the summation is used, giving
which is the spectral response with the frames "smeared" out over the plate's surface. The response and free wave propagation, in a plate periodically stiffened by frames, has been investigated by Mace [11,12], who first obtains the response, when the excitation is a convected pressure, as an infinite set of "space harmon ics". For a numerical example, a 1 cm steel plate loaded with water on one side only is considered. The rectangular cross-sections of the steel frames have width 1 cm and depth 2 cm, and the cross-sections of the steel bulkheads have width 1 cm and depth 5 cm; there are 7 bays, of length 20 cm each, between bulkheads. Loss factors of the plate and stiffeners are chosen as rj = 0.02. One of the required constants is the area moment of inertia of the stiffener cross-section; this is taken about the stiffener contact line with the plate, i.e. 7 = a&3/12 + a6 3 /4, where a is stiffener width and b is stiffener depth. The excitation is a transverse point force of unit amplitude. In Figure 8.10 is shown broadside aspect far field sound levels
204
Acoustics of Underwater Structures
Figure 8.10: Broadside far field sound level of steel plate stiffened by frames alone. T h e excitation is a unit point force between frames. T h e smooth reference plot is for t h e unstiffened plate. Levels are in dB reference 1 micropascal at 1 m .
Figure 8.11: Broadside far field sound level of steel plate stiffened by frames alone. T h e excitation is a unit point force on a frame. T h e smooth reference plot is for t h e unstiffened plate. Levels are in dB reference 1 micropascal at 1 m.
Thin Plate
205
Figure 8.12: Broadside far field sound level of steel plate stiffened by frames and bulkheads, with 7 bays between bulkheads. T h e excitation is a unit point force at the centre of the compartment bounded by bulkheads, i.e. between the central frames. T h e smooth reference plot is for the unstiffened plate. Levels are in dB reference 1 micropascal at 1 m .
for the case in which there are no bulkheads and the excitation is between frames, and in Figure 8.11 the excitation is on a frame. T h e peaks in the spectra, which are more t h a n 10 dB above the levels of the unstiffened plate, are associated with coherence of frame reaction forces and the pass and stop band structure of wave propagation in the fluid-plate system. At frequencies higher than those shown, levels drop relative to those of the unstiffened plate when the excitation is on a frame, simply because the excitation is applied at a higher impedance; and when the excitation is between frames, levels of the stiffened and unstiffened plates gradually converge. In Figure 8.12 is shown a plot when bulkheads are present. T h e excitation is between frames, at the centre of the compartment bounded by bulkheads, so comparison should be m a d e with Figure 8.10 to gauge the effect of the bulkheads. It is evident t h a t the presence of bulkheads affects broadside sound levels appreciably at low frequency. As frequency increases, the effect of the bulkheads diminishes because an increasing proportion of the energy supplied by the driving force is dissipated by local radiation and structural damping before
206
Acoustics of Underwater Structures
Figure 8.13: Waterfall plot of far field sound level, versus frequency and angle 0, of steel plate stiffened by frames alone. The excitation is a unit point force applied to a frame. The azimuthal angle is <j> — 0°, viz. the sound pressure is observed in a plane perpendicular to the frames.
Figure 8.14: Waterfall plot of far field sound level, versus frequency and angle 0, of steel plate stiffened by frames alone. The excitation is a unit point force applied to a frame. The azimuthal angle is > = 90°, viz. the sound pressure is observed in a plane parallel to the frames.
Thin Plate
207
it reaches the bulkheads. A characteristic of infinite systems is t h a t frequencies at which peaks appear in the far field pressure spectrum are likely to depend on the location of the ob servation point. This is illustrated graphically by "waterfall" plots of sound level versus 6 and frequency shown in Figures 8.13 and 8.14. The plate is stiffened by frames alone, the point force excitation being applied to a frame. Flat baselines in the plots are due to clipping, when levels are more than 15 dB down on the m a x i m u m in the plot, to enhance the displays. In Figure 8.13, the azimuthal angle is > = 0 and the b o t t o m line of data, 6 = 0, corresponds to the broadside spectrum shown in Figure 8.11. As the angle of observation, 0, varies, it is ev ident t h a t the locations of peaks move in frequency. This is a characteristic of a system which is both extended and dispersive; peaks are generally classified as coincidence resonances rather t h a n the true resonances associated with finite systems. This phenomenon is considered further in Chapter 9. In Figure 8.14, the azimuthal angle of observation is <j> = 90°, which means t h a t the angle 9 varies in the plane of the frames. This plot is markedly different from the plot at <j> = 0°. T h e reason stems from the greatly increased bending stiffness in the y direction. There is a practical consequence of this dramatic variation of sound pressure with observation angle: the acoustics is probably best described either by radiated sound power or by a median value of sound level at sampled obser vation points. T h e latter method might be more meaningful when significant structural disorder occurs in practice, and is ignored in the modelling process. This is because disorder can be responsible for blunting resonant peaks which contain much of the radiated sound power.
8.7
Orthogonally Stiffened P l a t e In Figure 8.15 is shown a plan view of a thin plate which is reinforced by
orthogonal frames, with spacing dx in the x direction and spacing dy in the y direction. Both upper and lower halfspaces contain fluids. T h e dimensions of the frames and are assumed small, so t h a t they do not interfere with wave propagation in the fluids nor cause significant coupling between transverse and in-plane plate motion.
Further, to simplify the mathematics, the frames are
represented by thin beams which are hinged at the plate contact points, so t h a t they do not transmit moments about the x and y axes.
208
Acoustics of Underwater Structures
Figure 8.15: Plan view of orthogonally stiffened plate. See also Figure 8.9 for excitations and coordinate systems. The spectral equation of motion of the system is Df(a,f3)W(a,p)
= S,(a,/3) - Px(a,/3) - P y (o,/3),
(8.7.1)
where Px(a,f3) and Py{oL,f3) are the spectral reaction stresses due attachment of frames parallel to the y and x directions, respectively. These reaction stresses can be found from the equations of motion of the nth frame in the y and x directions, viz. bxlx EyIy
d4W(x = ndx,y) QA 7T4 d4W(x
2
2 Px^ X)y) PxU AxAW{x-nd x
y — nd ) U dt* -Py
= ndy)
= Bx(x = ndx,y), = By(x,y = ndy),(S.7.2)
where the suffices x and y refer to frames parallel to the y and x axes, respec tively. The spectral tractions on the plate, due to attachment of the doubly
Thin Plate
209
infinite set of beams, can be obtained by the methods of Section 8.6 as Px(a,/3) + Py(a,l3)
i
(ExIxp4-u;2pxAx)—
=
°°
V
W(a+2*n/dXil3)
dx n = — oo
1
°° J2 W{arf+2*nldy).
+(EyIya4-uj2pyAy)T
(8.7.3)
y n = — oo
The spectral equation of motion can thus be written as oo
W(a,0)
+ G(a,0)
J2
oo
W(a + an,/3) + H(a,l3)
£
n = —oo
W(a,(3 + bn) = F(a,/3),
n = —oo
(8.7.4) where G(a,p)
=
{ExIxpA
-tj2PxAx)/Df(a,l3)dx,
H(a,/3)
=
(EyIya4
-oj2PyAy)/Df(a,l3)dy,
F{a,0)
=
St(a,P)/Dj(a,0),a
= 2ir/dx,b = 2ir/dy.
(8.7.5)
Eq. (8.7.4) is valid for all values of a and /?. In particular it is possible to set a to a + aq, and /? to /? + br, to give the equation oo
W(a+aq,f3+br)
+ G(a+aq,f3+br)
^
W(a+an,/3+br)
n = —oo oo
+#(a+ag,/?+6r) ^
Wia + aq^+bn)
=
F(a+ag,/?+&r), (8.7.6)
n = —oo
after the periodicity relations oo
oo
n = —oo
n = —oo
oo
oo
5 3 W r (a,/?+6n + &r) n = — oo
=
W / (a,/?+6n),
^
(8.7.7)
n = —oo
are used. The infinite sum is truncated at n — N, giving the equation AT
Wqr+Gqr
Yl n = -N
N
Wnr + Hqr £ n=-JV
Wqn = Fqr,
(8.7.8)
Acoustics of Underwater Structures
210 where Wqr = W(a + aqrf + 6r), G, r = G(<* + <*,/? + 6r),
Fqr = F ( a + aq, /? + 6r), tf,r
= H(a + aq, f3 + 6r).
(8.7.9)
When stiffener constants, forcing function F(a}/3) = Sz(a, f3)/Dj(a,/3) and wavenumbers a and /? are prescribed, Eq. (8.7.8) can be written down for val ues of q and r ranging from —TV to +N, giving a system of complex equations of order (2N + l) 2 - The solution gives the values of Wqr, and, in particular, Woo = W(a}/3) from which the far field pressure is calculated at the stationary phase wavenumbers, as described in previous sections. Computer implementa tion is straightforward but solution times rapidly become excessive because of a requirement, demonstrated by numerical studies, to increase N as frequency increases. This is because the wavenumber spectrum broadens as the plate dis placement becomes increasingly localized. The structure of Eq. (8.7.8) suggests that it should be possible to find an efficient numerical algorithm for calculating the values of Wqr. This is indeed the case, as proved by R.E. Borland (unpublished communication, National Physical Laboratory, Teddington, Middlesex, 1980, leading to reference [13]). The proof starts by writing Eq. (8.7.8) as Wqr + GqrUr + HqrVq = Fqr,
(8.7.10)
where N
Uj= £
N
Wnjy
n=-N
Vj= J2 Wn.
(8.7.11)
n=-N
By letting {U} and {V} be column vectors, of length 2N + 1, with elements Uj and Vjf, and by letting [Z] denote a diagonal matrix formed from a vector {Z} such that the correspondence between elements is Zjj = Zj, then Eq. (8.7.10) can be written as [W] + [G][U] + [V}[H] = [Fl (8.7.12) where [W] has elements Wqr, [G] has elements Gqr, [H] has elements Hqr and [F] has elements Fqr. Now, by letting {E} be a column vector whose elements are unity, Eq. (8.7.11) is written as {U}T = {E}T[W],
{V} = [W){E).
(8.7.13)
Thin Plate
211
Postmultiply Eq. (8.7.12) by {E} and use Eq. (8.7.13) to give {V} +
[G]{U}+[V)[H]{E}
= (m + \SKE})iV}
+ [G\{U}
=
[F]{E],
(8.7.14)
when the relation [V][iJ]{£} = [#]{i?}{V} is used. The inverse of this matrix equation is {V}={[I)
+ [H]{E}y1(-[G}{U}
+ [F}{E}),
(8.7.15)
where the inverse is trivial because ([I] + [i/]{i£}J is a diagonal matrix. When Eq. (8.7.12) is premultiplied by {E}T and the transpose taken of the resulting equation, then, after some re-arrangement, the equation {U} + [H]T{V} = [F]T{E}
([/] + W{E})
(8.7.16)
is obtained. When Eq. (8.7.15) is used to eliminate {V} from this equation, the matrix equation ([/] + [G\T{E]) =
[Ff{E}
- [H]T {[I] + [H]{E})
- [H)T {[I] + [H]{E])
_1
_1
[G]
[F){E]
W} (8.7.17)
results. This equation can be solved for the vector {£/}; the vector {V} being obtained from Eq. (8.7.15): The values of Wqr are obtained from Eq. (8.7.10). The complex matrix, of Eq. (8.7.17), is of order (27V + 1), hence, it can be inverted 87V3 times faster than by direct solution of Eq. (8.7.8). Borland's matrix decomposition has achieved a spectacular saving of computer time. The problem has also been re-worked by Mace [14], who uses the method of space harmonics. He also reduces the problem to the solution of matrix equations of order 27V + 1 . Further reduction in the order of the matrix equations is not thought possible; thus, a closed-form solution for VF(a,/?) is unlikely to exist. In Figure 8.16 is shown the broadside far field sound level of a steel plate with orthogonal steel frames with spacings dx = dy = 20 cm; other constants being the same as those of the plate considered in Section 8.6. The unit point force excitation is applied at a frame intersection point. The peaks in the spectrum again stem from a coherence of frame reaction forces. In Figure 8.17 is shown
212
Acoustics of Underwater Structures
Figure 8.16: Broadside far field sound level of 1 cm steel plate orthogonally stiff ened by frames. T h e excitation is a unit point force applied at the intersection of frames. T h e s m o o t h reference plot is for the unstiffened plate. Levels are in dB reference 1 micropascal at 1 m .
Figure 8.17: Broadside far field sound pressure, in millipascals reference 1 m, of 1 cm steel plate with orthogonal stiffening. T h e time scale, in milliseconds, has an arbitrary origin. T h e excitation is a point force of unit amplitude, applied at the intersection of orthogonal frames, whose time variation is a 4 kHz sine wave on for 1 cycle.
Thin Plate
213
the transient response when the time variation of the excitation is a 4 kHz sine wave on for a single cycle. The initial far field transient closely resembles the excitation; there follows extended ringing and beating associated with the two dominant peaks in the time-harmonic spectrum. 8.8
Plate with Point Attachments
In the previous section, the acoustic behaviour of stiffened plates has been made tractable by the assumption of periodicity. Here is considered an infinite plate with a finite number of point attachments which exert transverse forces on the plate but not moments, i.e. the attachments are hinged. The geometry is shown in Figure 8.18, in which the examples shown of point attachments are a mass, mass &, spring, grounded spring and a displacement constraint. Exci tations are time-harmonic point forces and a plane wave at arbitrary incidence. The acoustics of the thin plate for point force excitation is considered first; the special case of line attachments and line excitation has been considered by Spicer [5].
Figure 8.18: Section of infinite plate with a finite number of point attachments. Excitations are a point force and a plane wave.
Acoustics of Underwater Structures
214
Assume t h a t there a r e N distinct points on the plate a t which discrete elements are attached. At these points prescribed external point forces can also be present. A prescribed force applied remote from a point connection can be thought of as being located a t the same point as a vanishingly small mass, say. T h e spectral equation of motion of the system is TV
Df(<X, P)W(a, P)=Y1 n=l
N Fzn
eX
P(-'laXn
~ i/fyn) - 5 Z n=l
Frn
eX
P(~iaXn
~ l/fyn),
(8.8.1) where D,(a,
P) = D(a> + /? 2 ) 2 - u>p,h -
^
-
^
It
(8.8.2)
lb
is the spectral dynamic stiffness of the plate. It is recalled here t h a t Sz(x,y)
=
FQS(X — xo)6(y — yo) is the excitation due to a point force located a t (XQ, t/o) on the plate's surface, its transform being Sz(a,fi) Fzn
= Foexp(—iaxo — i/ft/o)- Thus,
is the prescribed transverse external force a t point (xn,yn)
and Frn is the point reaction force a t (xn,yn)
on the plate,
due to the n t h point attachment.
T h e solution of Eq. (8.8.1) is obtained in m a t r i x notation as = { e x p ( - i a z n - \(3yn)}T
W(a,0) where {Fzn},
({Fzn}
- {Frn})
{Frn} and {exp(—iax n — i/3nyn)}
/Df(aJ),
(8.8.3)
are column vectors of the N
values of Fzn, Frn and exp(—\ax n — i/3yn). Before proceeding it is necessary t o define the m a t r i x relation between the dynamic stiffnesses of the point attachments and reaction forces {Frn} as [SP]{W(xn,yn)} where {W(xn,
= {Frn},
(8.8.4)
yn)} is a column vector of the N displacements at the connection
points. If the attachments are not connected to one another, except via the plate, as illustrated in Figure 8.18, the m a t r i x [Sp] is a diagonal matrix. Then, for a mass attached to the plate a t (xn,yn), 2
-UJ M/(1
2
- u M/S)\
constraint, Snn — oo.
Snn = - C J 2 M ; for a mass & spring, Snn =
for a grounded spring Snn = 5 ; and for a displacement In a computer program, a displacement constraint is
satisfied by appropriate modification of the system m a t r i x rows and columns, as described later.
Thin Plate
215
The reaction forces {Frn} are eliminated between Eq. (8.8.3) and Eq. (8.8.4), giving W(a,p)
+ [exp(-iaxn
- i/3yn)}T[SP]{W(xn,
= {exp(-iaxn
- ipyn)}T{Fzn}/Df(a,
yn)}/Df(a,p) /?).
(8.8.5)
The inverse Fourier transform of this equation gives the plate displacement as W(x,y) + {G(x - xn,y yn)}T[Sp]{W(xn,yn)} T = {G(x-xn,y-yn)} {Fzn},
(8.8.6)
where {G(x — xn,y — yn)} is a column vector of the N values of the Green's function. The Green's function is defined as the plate response at (x,y) due to a unit point force at (xn,yn), in the absence of point attachments. Thus, from Eq. (8.2.12), f + OO
G{x-xn)y-yn)
= —j^
/» + oo
exp (ia(s - xn) + i/?(y - yn))
j _ ^-
—
^ - - "
— dad/?,
(8.8.7) which can immediately be written as a single integral, using the first of Eq. (8.2.15), as ^/ \ 1 /°° aJo(«r) : G(z-£n,?/-?/n)= — / 777-^ 5—£—: 27 2 ~ 7 T d a ' (8-8.8) 4 2 2 2TT J0 (Da - u> psh - iptu /yt - ipb^2/7b) where r 2 = (x — xn)2-\-(y — yn)2. When dissipation is included in the system, the Green's function can be evaluated by an adaptive Gaussian quadrature formula. Computational times can be reduced by noting that G(x—xn, y—yn) is a function of the cylindrical radial coordinate alone, i.e. it depends only on the separation distance between the excitation and observation points. When Eq. (8.8.6) is written down at the N attachment points, (xm, ym), in turn, the matrix equation (M + [G][SP]) {W(xn, yn)} = [G]{Fzn}
(8.8.9)
results where [G] is the symmetric Green's function matrix, whose elements Gnm are the unconstrained plate response at (# m ,t/ m ) due to a unit point force at (xn,yn)- The elements of the matrix [G] are obtained from Eq. (8.8.8). The Green's function matrix [G] is also the receptance matrix of the unconstrained plate for the prescribed attachment points; its inverse, [G] - 1 , is the dynamic
Acoustics of Underwater Structures
216
stiffness m a t r i x of the plate for the prescribed attachment points. When the above equation is multiplied by [ G ] ~ \ then the system m a t r i x equation is ob tained as ([G]-1 + [SP]) {W(xn,
yn)} = {Fzn}.
If the displacement constraint W(xm,ym)
(8.8.10)
= 0 is applied at point (xm,ym)
on
the plate, then elements of row and column m, in the coefficient m a t r i x on the left hand side, are set to zero; the diagonal term is set to unity and the m t h element of the prescribed excitation vector {Fzn}
is set to zero.
By solving the m a t r i x equation numerically, the N displacements {W(xn,
yn)}
are obtained. T h e equivalent forces {Fp} on the plate which cause these displace ments are obtained from the dynamic stiffness m a t r i x of the plate as [G)-l{W(xn,yn)}
= {Fzn}
- {Frn}
= {Fp}.
(8.8.11)
T h e pressure in the far field is obtained by the method of stationary phase, directly from Eq. (8.2.13) by superposition, as
Pt/(*,M) =
~ r \
AexP(-iaxn
-i0nyn)}T{Fp}eXfkf\
(8.8.12)
where, in a system of spherical coordinates, (R, #,>), the stationary phase wavenumbers are ao = ktsm0
cos
spectral displacement W(a,f3)
for selected values of a and /? can be found from
Eq. (8.8.5). T h e pressure in the far field is then obtained directly from Eq. (8.2.6) as Ptf(R,
6,) = -Pt^W(a0,
lo)
6
*
1
^^.
(8.8.13)
For a numerical example, a system comprising four mass & spring systems m o u n t e d on a 1 cm steel plate is considered; these attachments are located on the x and y coordinate axes at distances 0.2 m from the origin where a point force is applied. T h e plate is loaded on one side by water, the other side bounding a light fluid whose reaction on the plate is negligible. T h e point dynamical systems have stiffness S = 1.0 x 10 7 and mass M = 10 kg. Loss factors of the plate and springs are 77 = 0.02. T h e geometry is shown in Figure 8.19. Plots of broadside far field sound radiation due to a unit point force excitation are shown in Figure 8.20. For the mass &; spring systems, the peak at about 180 Hz arises from a m a s s / s p r i n g resonance in which there is only small motion of the plate
Thin Plate
217
Figure 8.19: Schematic of sound radiation in water of plate with attached m a s s springs. To aid clarity, the geometry, with respect to Figure 8.18, has been rotated through 180°.
Figure 8.20: Broadside far field sound level in water of plate with (a) four m a s s spring a t t a c h m e n t s , (b) four mass attachments and (c) no attachments. T h e excitation is a unit point force, applied to the plate at the centroid of the m a s s spring system. Levels are in dB reference 1 micropascal at 1 m.
Acoustics of Underwater Structures
218
relative to the masses; above this frequency, the masses become increasingly isolated from the plate. For the case in which the masses alone are present, the large hump at about 350 Hz is likely to stem from a weak resonance of a region of plate inside the constraints. The plots demonstrate that point attachments can increase the radiation of an otherwise uniform plate. The physical mechanism is the conversion of non-radiating wavenumbers at the constraints into radiating wavenumbers. The reaction forces of constraint act as additional excitations on the uniform plate, and radiation from them can either amplify or attenuate radiation from prescribed drive forces. Consider, now, the same problem but with plane wave excitation at arbi trary incidence, as shown in Figure 8.18. The pressures in the upper and lower halfspaces are decomposed as
pt(x, y, z) = p«(s, y, z) + pr(x, y, z) + pte(*, y, z) + Ptc(x, y, z), Pb(x,y,z)
-
pbe(x,y,z)
+ pbc(x,y,z).
(8.8.14)
The incident pressure, pi(x,y, z), the specular reflection, p r (x,t/, 2), as though the plate were hard and the pressure arising from motion of the uniform plate in the absence of constraints, pte(x, y, z), are obtained from Section 8.4 as Pi(x, y, z)
=
Aexp(-iaiX
pr{x, y, z)
-
pte(x, y, z)
-
Aexp(-iaiX - i $ y + iyuz), -2ptuj2A . — — exp(-\aiX - ifcy + \yuz), i7tiDf(-ai,-Pi)
Pbe{x,y,z)
=
:
pr-7
- {fry -
iyuz),
—exp(-iaix-if3iy-iybiz),
(8.8.15)
where oa =
kt sin 6i cos fa,
Pi
=
ktsmOismfa,
yu
=
kt cos 0f,
ybi
=
y/(tf-k*
sin2 0i),
(8.8.16)
and kt = uj/ct, kb = cj/cb- The z components of the particle displacements in the halfspaces, Wte(z, y, z) and Wbe(x, y, 2), due to motion of the unconstrained
Thin Plate
219
plate, are obtained from the third and fourth of Eq. (8.8.15), as Wte(x, y, z)
-
Whe(x,y,z)
=
—2A —— — exp(-iaix - i/?f-y + Df(-ai,-fJi) —2A —— —exp(-iaix-if3iy-iybiz).
ijuz), (8.8.17)
In Eq. (8.8.15) and Eq. (8.8.16), pressures and their particle displacements are of single wavenumber. However, the pressures ptc(x,y,z) and pi,c(x,y,z) due to the presence of the constraints have a continuous spectrum of wavenumbers, their transforms being ptc{&, /?, z) and pbc(a, P, z)The spectral equation of motion of the plate is S(a,p)(We(a,P)
+ Wc(a,l3))
N
=
-^2Frn
exp(-iax„ - i0nyn) - p;(a, p, 0) - pr(ay P, 0)
n= l
-Pte((*, P, 0) -
Ptc(a,
p, 0) + pbe(a, /?, 0) + phc{a, /?, 0)
(8.8.18)
where We(a, P) is the Fourier transform of the plate displacement in the absence of constraints, viz. the transform of Eq. (8.8.17) evaluated at z — 0. The displacement Wc(x, y) and its transform Wc{ct, P) are displacements arising from the presence of the constraints. After substituting the Fourier transforms of Eq. (8.8.15) into this equation, it is found that a considerable cancellation occurs, leaving . N
S(a, P)We(ar0)
= -^2Frn
exp{-iaxn
- i/3yn) - ptc(a, /?, 0) + p 6 c (a, p, 0)
(8.8.19) as the spectral equation satisfied by the displacement due to the presence of the constraints. This equation is re-arranged as Df(a,P)We(a,P)
= - { e x p ( - i a z n - \(3yn)}T{Frn},
(8.8.20)
by using the methods of Section 8.2. Before proceeding it is necessary to define the matrix relation between the dynamic stiffness of the point attachments and forces {Frn} as [Sp]({We{xn,yn)}
+ {We(xn,yn)})={Fmh
(8.8.21)
Acoustics of Underwater Structures
220
where the elements of [Sp] for simple point attachments have previously been defined. The reaction forces {Frn} are eliminated between the above equations, giving Df{a,p)Wc{ct,p)
= -{exp(-iaxn-ipyn)}T[Sp]({We(xniyn)}
{Wc(xn,yn)}). (8.8.22) The solution for the displacement, due to the constraints, is obtained by Fourier transformation as Wc(xyy) = -{G(x-xnjy-yn)}T[Sp]({We(xn,yn)}
+
+ {Wc(xn,yn)}),
(8.8.23)
where the function G(x — xniy—yn) is the Green's function defined by Eq. (8.8.7) and Eq. (8.8.8). When Eq. (8.8.3) is written down at the TV attachment points (xmyym), in turn, and premultiplied by [G]" 1 , the matrix equation ([G]" 1 + [Sp]) {Wc{xn,yn)}
= -[Sp]{We(xn,yn)}
(8.8.24)
resul